WorldWideScience

Sample records for univ press oxford

  1. Book review: Dexter Hoyos, Mastering the West. Rome and Carthage at War, Oxford-New York, Oxford University Press, 2015, pp. XXI, 337; ISBN 9780199860104

    Gabriele Demurtas

    2017-11-01

    Full Text Available This essay offers a critical review of the volume by Dexter Hoyos «Mastering the West. Rome and Carthage at War», published in 2015 in Oxford-New York by the Oxford University Press, focused on the conflicts that involved Rome and Carthage between 264 and 146 BC for the supremacy in the western Mediterranean.

  2. How to Find Optimal National Model of Pension System: the Projection on Russia (Book Review: Barr, N. Pension reform: A short guide [Text] / N. Barr, P. Diamond. – Oxford : Oxford University Press, 2010. – 261 p.

    Karen Avakovich Tumanyants

    2015-12-01

    Full Text Available How to Find Optimal National Model of Pension System: the Projection on Russia (Book Review: Barr, N. Pension reform: A short guide [Text] / N. Barr, P. Diamond. – Oxford : Oxford University Press, 2010. – 261 p.

  3. Book Review: MACBETH, Danielle. Realizing Reason: A Narrative of Truth and Knowing. Oxford: Oxford University Press, 2014, 494 pp., $99.00 (hbk, ISBN 9780198704751

    Matheus Valente

    Full Text Available ABSTRACT We review Danielle Macbeth's book Realizing Reason, published by Oxford University Press in 2014. This extensive book is composed by nine chapters in which Macbeth critically presents the development of mathematical practices in the Western world - from its founding in Ancient Greece's diagrammatic practices to the apogee of mathematical logic in the nineteenth and twentieth-centuries - while offering a revaluation of its present stage by means of a reconsideration of Gottlob Frege's philosophical contributions. In this review, we present a summary of each chapter's contents and make general considerations about them.

  4. The new philosophy of psychiatry: its (recent) past, present and future: a review of the Oxford University Press series International Perspectives in Philosophy and Psychiatry

    Banner, Natalie F; Thornton, Tim

    2007-01-01

    There has been a recent growth in philosophy of psychiatry that draws heavily (although not exclusively) on analytic philosophy with the aim of a better understanding of psychiatry through an analysis of some of its fundamental concepts. This 'new philosophy of psychiatry' is an addition to both analytic philosophy and to the broader interpretation of mental health care. Nevertheless, it is already a flourishing philosophical field. One indication of this is the new Oxford University Press series International Perspectives in Philosophy and Psychiatry seven volumes of which (by Bolton and Hill; Bracken and Thomas; Fulford, Morris, Sadler, and Stanghellini; Hughes, Louw, and Sabat; Pickering; Sadler; and Stanghellini) are examined in this critical review.

  5. [Book review] Cowbirds and Other Brood Parasites by Catherine Ortega. Tucson, Arizona: University of Arizona Press (1998). The Avian Brood Parasites: Deception at the Nest by Paul A. Johnsgard. New York: Oxford University Press (1997) Parasitic Birds and their Hosts: Studies in Coevolution edited by S.I. Rothstein & S.K. Robinson. New York: Oxford University Press (1998)

    Hahn, D.C.

    1999-01-01

    We are in a golden age for the study of brood parasitism, judging from both the quantity and quality of recent scientific publications on cuckoos, cowbirds and parasitic finches by investigators working in Europe, the Americas, Africa and Asia. As Johnsgard (1997) remarks in his preface, the evolutionary, ecological, and behavioural questions posed by obligate brood parasites are among the most intriguing contemporary ornithological topics. Rothstein & Robinson (1998) explain that brood parasites make ideal subjects for testing the generality of models for the evolution of social and mating behaviour, foraging behaviour, spatial distribution, and vocal development, because the strategy of providing no parental care removes constraints imposed on other birds. Since Aristotle, people have been fascinated by brood parasites, but only in the past two decades has the number of investigators working on this topic reached a critical mass and created momentum that promises many breakthroughs. New studies are being completed so rapidly that a general book is inevitably out of date on some topics by the time it is published. A complete library on brood parasitism should add two recent volumes (Morrison et al. 1999; Smith et al., in press).to the three reviewed here.

  6. Oxford dictionary of Physics

    Isaacs, Alan

    The dictionary is derived from the Concise Science Dictionary, first published by Oxford University Press in 1984 (third edition, 1996). It consists of all the entries relating to physics in that dictionary, together with some of those entries relating to astronomy that are required for an understanding of astrophysics and many entries that relate to physical chemistry. It also contains a selection of the words used in mathematics that are relevant to physics, as well as the key words in metal science, computing, and electronics. For this third edition a number of words from quantum field physics and statistical mechanics have been added. Cosmology and particle physics have been updated and a number of general entries have been expanded.

  7. Book Review: Die Oxford Kortspelgids | Ponelis | Lexikos

    Book Title: Die Oxford Kortspelgids. Book Author: A.S. Coetser. 1ste uitgawe 1993, ix + 379 pp. ISBN 0-19-570802-4. Kaapstad: Oxford University Press. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL.

  8. Kyushu Univ.; Kyushu daigaku

    NONE

    1999-11-01

    Groups such as Kyushu Univ. the perfume the Netherlands Co. confirmed having the effect in which the porous tile made in industrial waste eases the heat island phenomenon of the city. It was proven that it took a heat of the circumference by the process in which the water evaporates, when the water is scattered in the tile, and lowers the temperature near the largest 3 degrees C surface. Research group mainly on Yoshinori Suzuki professors of Kyushu Univ. noticed having water retentiveness of the degree in which the porous cost tile in which small hole opened enough is equal to the sand. The experiment which confirmed the cooling effect of the tile was carried out. By burning stone powder and passage mud of lakes and marshes which came out, when the stone material is cut down, the tile made it. The temperature of ground 1.2m was examined, after sidewalks of housing complex in the Fukuoka City and school building in Kyushu Univ., etc. are covered with this tile, and after the water is scattered. As the result, it was low a little, even if it passed over 2 hours, shade. (translated by NEDO)

  9. New Oxford style manual

    2012-01-01

    The New Oxford Style Manual brings together two essential reference works in a single volume: New Hart's Rules and the New Oxford Dictionary for Writers and Editors. New Hart's Rules, Oxford's definitive guide to style, consists of 20 chapters that provide authoritative and expert advice on how to prepare copy for publication. Topics covered include how to use italic, roman, and other type treatments, numbers and dates, law and legal references, illustrations, notes and references, and bibliographies. The guidelines are complemented by the New Oxford Dictionary for Writers and Editors, which features 25,000 alphabetically arranged entries giving authoritative advice on those words and names which raise questions time and time again because of spelling, capitalization, hyphenation, or cultural and historical context. Entries give full coverage of recommended spellings, variant forms, confusable words, hyphenation, capitalization, foreign and specialist terms, proper names, and abbreviations. The dictionary a...

  10. The Oxford Handbook of Applied Ethnomusicology

    Jasmina Talam

    2016-06-01

    Full Text Available In July 2015, Oxford University Press published a substantial volume titled The Oxford Handbook of Applied Ethnomusicology, co-edited by two eminent ethnomusicologists, Svanibor Pettan and Jeff Todd Titon. The book is an impressive collection of different approaches in applied ethnomusicology, developed through a combination of ethnographic research (personal experiences and fieldwork in different parts of the world and contemporary scholarship.

  11. Christopher Hasty, Meter as Rhythm [Metro come Ritmo], Oxford University Press, New York & Oxford, 1997.

    Antonio Cascelli

    2014-10-01

    Full Text Available Quando, nell’undicesimo libro delle Confessioni, S. Agostino si interroga circa la natura del tempo, individua un problema linguistico in senso forte, dove il linguaggio non costituisce una semplice etichetta da attaccare agli eventi ma un modo di entrare in relazione con essi e conoscerli. Quando qualcuno gli domanda cosa sia il tempo, egli non lo sa, cioè non sa come spiegarlo e gli mancano le parole per esprimere qualcosa che, quando nessuno glielo chiede, egli conosce. Come possiamo esprimere il fluire del tempo? Come possiamo dire il tempo e dar voce a una profonda esperienza cognitiva del divenire e della relazione che noi stabiliamo con esso? Queste domande costituiscono le basi del libro di Christopher Hasty. Il suo punto di partenza è la considerazione che, sopprimendo la creatività e la novità dell'effettiva esperienza musicale, l’astrazione dell’analisi tradisce la natura temporale della musica. Al contrario, Hasty vuole prendere in considerazione questa natura temporale e "cercare dei modi di parlare dell’aspetto evanescente della musica, sviluppando concetti che catturino tanto la determinatezza quanto l’indeterminatezza degli eventi al loro passaggio" (p. vii.

  12. Review: G.-M. de Schryver et al. (Eds.). Oxford Bilingual School ...

    Abstract. G.-M. de Schryver et al. (Eds.). Oxford Bilingual School Dictionary: IsiXhosa and English. 2014, 562 pp. ISBN 978-0-19-576682-0. Cape Town: Oxford University Press Southern Africa. Price R129.95.

  13. Women Leaders in Oxford House

    Timpo, Phyllis; Price, Temple; Salina, Doreen; Witek, Caroline; Pommer, Nicole; Jason, Leonard A.

    2014-01-01

    This qualitative study examined women assuming leadership roles in Oxford Houses, which are communal, democratically run recovery settings for substance use disorder. Semi-structured interviews were conducted with 10 women Oxford House leaders who shared their thoughts and experiences on leadership. Several themes emerged from qualitative data analysis, most notably that stepping up and accepting a leadership role in Oxford House had a positive effect on self-esteem, which is vital to women w...

  14. Women Leaders in Oxford House.

    Timpo, Phyllis; Price, Temple; Salina, Doreen; Witek, Caroline; Pommer, Nicole; Jason, Leonard A

    2014-01-01

    This qualitative study examined women assuming leadership roles in Oxford Houses, which are communal, democratically run recovery settings for substance use disorder. Semi-structured interviews were conducted with 10 women Oxford House leaders who shared their thoughts and experiences on leadership. Several themes emerged from qualitative data analysis, most notably that stepping up and accepting a leadership role in Oxford House had a positive effect on self-esteem, which is vital to women with a history of substance abuse. Barriers to leadership were also identified such as negative interpersonal relationships with other women. A number of methods mentioned to increase the number of women leaders included: developing workshops, providing positive encouragement, and accessing existing female role models. The implications of this study are discussed.

  15. The Oxford Handbook of the History of Linguistics

    Laborda, Xavier

    2013-01-01

    La reseña presenta el libro que K. Allan ha editado, The Oxford Handbook of the History of Linguistics (2013), en la colección de la Oxford University Press sobre Lingüística. En la obra participan más de treinta especialistas, que tratan de la historia en Occidente y, en menor medida, en Oriente. Los ámbitos de estudio respetan un orden tradicional: el sonido, la sintaxis y el significado y, como relativa novedad, la lingüística aplicada. Un interés complementario de la obr...

  16. La naissance de l'Univers

    Lizhi, Fang

    1990-01-01

    Cet ouvrage, excellente introduction à la cosmologie, expose la théorie du Big Bang dans ses derniers développements, de l'expansion de l'Univers à la cosmologie quantique, de la formation de structures à grande échelle à la physique de l'ère de Planck.

  17. Review of the Oxford Cryocooler

    Davey, G.

    1990-01-01

    The Oxford Cryocooler incorporates a linear drive compressor operating close to resonance. All dynamic seals are noncontacting clearance seals maintained by mounting the piston and displacer on mechanical suspension systems with infinite fatigue life. The displacer is pneumatically driven but controlled by a miniature linear motor. The cooler is therefore nonwearing and performance can be maintained even in adverse environments by servo control of piston and displacer strokes and relative phase. Split and integral, single- and two-stage coolers have been produced with operating temperatures between 30 K and 200 K, refrigeration powers between 50 mW and several watts and capable of operating in ambient temperatures from -40 C to 70 C. A current project aims to extend the refrigeration power to 500 watts at 80 K. Experimental optimisation techniques have been devised for rapid development of high efficiency coolers

  18. Usage Notes in the Oxford American Dictionary.

    Berner, R. Thomas

    1981-01-01

    Compares the "Oxford American Dictionary" with the "American Heritage Dictionary." Examines the dictionaries' differences in philosophies of language, introductory essays, and usage notes. Concludes that the "Oxford American Dictionary" is too conservative, paternalistic, and dogmatic for the 1980s. (DMM)

  19. Des univers multiples nouveaux horizons cosmiques

    Barrau, Aurélien

    2017-01-01

    Notre univers ne serait-il qu’une fraction d’un vaste multivers ? À l’heure des résultats expérimentaux de Planck et du LHC, de nouvelles questions essentielles se posent quant à l’unicité de l’Univers lui-même. Se pourrait-il que notre cosmos ne soit qu’un îlot dérisoire perdu dans un vaste multivers ? Il est aujourd’hui légitime de le supposer. Mais cette proposition vertigineuse est-elle encore scientifique ? La récente mesure détaillée du rayonnement cosmologique fossile ouvre la voie à de nouvelles approches. Faisant le point sur ces avancées, Aurélien Barrau nous dévoile, dans cette édition actualisée, les théories cosmologiques les plus audacieuses.

  20. L'Univers avant le Big Bang

    Rouat, Sylvie

    2003-01-01

    "Tout n'a pas commencé par une explosion. L'historie du cosmos avait débuté biena vant le Big Bang, si l'on suit la théorie défendue par les partisans d'une nouvelle cosmologie issue de la mystérieuse théorie des cordes. A l'heure où vacillent les scénarios classiques du XXe siècle, se prépare un grand chamboulement de nos idées sur la naissance de l'Univers et son devenir, sur l'existence possible d'univers parallèles. Des théories séduisantes qui seront mises à l'épreuve au cours de la prochaine décennie" (11 pages)

  1. L'Univers chiffonné

    Luminet, Jean-Pierre

    2001-01-01

    Quelle est la forme de l'univers ? Est-il courbe, refermé sur lui-même ? Est-il en expansion ? Vers quoi tend-il ? L'espace serait-il « chiffonné » au point de créer des images fantômes des lointaines galaxies ? Telles sont les questions que pose Jean-Pierre Luminet avant d'y répondre dans une langue toujours claire et fluide. Spécialiste des trous noirs et du big bang, il nous fait voyager dans de surprenants couloirs de l'espace-temps où topologies de l'univers, explorations de l'infini et mirages cosmiques conjuguent leurs mystérieux attraits pour dérouter nos sens. La construction de l'ouvrage épouse la forme de son sujet: une lecture à multiples entrées, des pistes à explorer pour s'y perdre, bifurquer à nouveau ou revenir en arrière, au gré du plaisir ou de la curiosité de chacun. Anecdotes cocasses et révélations historiques étonnantes agrémentent un parcours très visuel. Dans quel univers sommes-nous plongés ? A travers les concepts les plus déconcertants de la cosmologie, l...

  2. Book review: T. J. Stohlgren: Measuring plant diversity: lessons from the field; Oxford University Press, Oxford, 390 pp.

    Petřík, Petr

    2007-01-01

    Roč. 42, č. 4 (2007), s. 438-439 ISSN 1211-9520 Institutional support: RVO:67985939 Keywords : biodiversity * methodology * ecology Subject RIV: EF - Botanics OBOR OECD: Plant sciences, botany Impact factor: 1.133, year: 2007

  3. Leadership Styles of Oxford House Officers.

    Komer, Anne C; Jason, Leonard A; Harvey, Ronald; Olson, Brad

    Oxford House recovery homes are unusual compared to most recovery homes in that they function entirely without the use of staff; instead members are elected to officer positions. The aim of this study was to perform preliminary analysis of the types of leadership styles utilized by members of oxford house. Twentynine house residents of five Oxford Houses were asked to rate their own leadership styles using the leader behavior description questionnaire and the multifactor leader questionnaire. Results showed that participants were more likely to use person-oriented behaviors above task-oriented actions. Transformational leadership was associated with higher outcomes than Transactional leadership. Implications for future research are discussed.

  4. The Making of the "Oxford English Dictionary."

    Winchester, Simon

    2003-01-01

    Summarizes remarks made to open the Gallaudet University conference on Dictionaries and the Standardization of languages. It concerns the making of what is arguably the world's greatest dictionary, "The Oxford English Dictionary." (VWL)

  5. Le vide univers du tout et du rien

    Diner, Simon

    1997-01-01

    Pourquoi l'Univers plutôt que le vide ? Le temps et l'espace existent-ils en l'absence de l'Univers ? Que reste-t-il quand tout est enlevé ? Pourquoi quelque chose plutôt que rien ? Depuis des siècles, ces interrogations mobilisent philosophes et physiciens. Mais aujourd'hui, le vide n'est pas le rien. Il serait même l'acteur central de l'histoire de la matière et de l'Univers, le partenaire privilégié de la physique. Vide et matière ne sont plus deux manifestations séparées de la nature, mais deux aspects d'une même réalité. Le vide est l'état de base dont la matière émerge, sans couper son cordon ombilical Le vide comme Univers du rien cède la place au vide comme Univers du tout. Que le vide puisse être conçu par les physiciens comme réservoir potentiel d'univers, voici qui ne devrait laisser personne indifférent. Ce livre ouvre un débat et nous convie à une réflexion surprenante.

  6. L'univers des particules une introduction

    Diu, Bernard

    2017-01-01

    Au début du XXe siècle, les scientifiques imaginaient que l'ensemble du monde était construit à partir de trois "particules élémentaires" (électron, proton, photon). Depuis, nous avons appris que notre univers contient un nombre considérable de particules - soit des corps individualisés d'extension réduite - de natures et de caractéristiques très diverses, qu'il serait illusoire de chercher à énumérer de manière formelle et systématique. C'est pourquoi le propos de ce livre suit une stratégie fondamentalement différente. Il s'organise autour de certaines propriétés générales que laissent apparaître l'observation et l'étude des particules dans leur existence et leur conduite primaire. Aussi, chacune des parties de cet ouvrage rassemble plusieurs chapitres de thèmes voisins, mais un sujet donné peut également être traité en divers endroits et, de ce fait, être abordé sous différents angles de manière complémentaire. De telles compositions et décompositions d'éléments proche...

  7. The Oxford English Dictionary: A Brief History.

    Fritze, Ronald H.

    1989-01-01

    Reviews the development of English dictionaries in general and the Oxford English Dictionary (OED) in particular. The discussion covers the decision by the Philological Society to create the dictionary, the principles that guided its development, the involvement of James Augustus Henry Murray, the magnitude and progress of the project, and the…

  8. The Oxford handbook of economic inequality

    Salverda, W.; Nolan, B.; Smeeding, T.M.

    2009-01-01

    The essential guide for students and researchers interested in economic inequality Contains 27 original research contributions from the top names in economic inequality. The Oxford Handbook of Economic Inequality presents a new and challenging analysis of economic inequality, focusing primarily on

  9. The Oxford Picture Dictionary. Beginning Workbook.

    Fuchs, Marjorie

    The beginning workbook of the Oxford Picture Dictionary is in full color and offers vocabulary reinforcement activities that correspond page for page with the dictionary. Clear and simple instructions with examples make it suitable for independent use in the classroom or at home. The workbook has up-to-date art and graphics, explaining over 3700…

  10. The "New Oxford English Dictionary" Project.

    Fawcett, Heather

    1993-01-01

    Describes the conversion of the 22,000-page Oxford English Dictionary to an electronic version incorporating a modified Standard Generalized Markup Language (SGML) syntax. Explains that the database designers chose structured markup because it supports users' data searching needs, allows textual components to be extracted or modified, and allows…

  11. Cosmicflows Constrained Local UniversE Simulations

    Sorce, Jenny G.; Gottlöber, Stefan; Yepes, Gustavo; Hoffman, Yehuda; Courtois, Helene M.; Steinmetz, Matthias; Tully, R. Brent; Pomarède, Daniel; Carlesi, Edoardo

    2016-01-01

    This paper combines observational data sets and cosmological simulations to generate realistic numerical replicas of the nearby Universe. The latter are excellent laboratories for studies of the non-linear process of structure formation in our neighbourhood. With measurements of radial peculiar velocities in the local Universe (cosmicflows-2) and a newly developed technique, we produce Constrained Local UniversE Simulations (CLUES). To assess the quality of these constrained simulations, we compare them with random simulations as well as with local observations. The cosmic variance, defined as the mean one-sigma scatter of cell-to-cell comparison between two fields, is significantly smaller for the constrained simulations than for the random simulations. Within the inner part of the box where most of the constraints are, the scatter is smaller by a factor of 2 to 3 on a 5 h-1 Mpc scale with respect to that found for random simulations. This one-sigma scatter obtained when comparing the simulated and the observation-reconstructed velocity fields is only 104 ± 4 km s-1, I.e. the linear theory threshold. These two results demonstrate that these simulations are in agreement with each other and with the observations of our neighbourhood. For the first time, simulations constrained with observational radial peculiar velocities resemble the local Universe up to a distance of 150 h-1 Mpc on a scale of a few tens of megaparsecs. When focusing on the inner part of the box, the resemblance with our cosmic neighbourhood extends to a few megaparsecs (<5 h-1 Mpc). The simulations provide a proper large-scale environment for studies of the formation of nearby objects.

  12. Oxford House Recovery Homes: Characteristics and Effectiveness

    Jason, Leonard A.; Ferrari, Joseph R.

    2010-01-01

    One of the largest examples of a community-based, mutual-help residential community for high risk substance abuse individuals is Oxford House. In the U.S., over 9,800 people live in these self-run dwellings where they obtain jobs, pay utility bills, and learn to be responsible citizens. Beginning with one single rented residence in the mid 1970s, Oxford Houses now number over 1,300. These rented homes are helping to deal with drug addiction and community re-entry by providing stable housing without any limits on length of stay, a network of job opportunities, and support for abstinence. An exploration of the research on these unique settings highlights the strengths of such a community-based approach to addressing addiction. New roles for psychologists in working with these types of support systems are identified. PMID:20577571

  13. Oxford Dictionary of Sports Science and Medicine

    2007-01-01

    DESCRIPTION The Oxford Dictionary of Sports Science and Medicine provides reliable definitions of sports science and medicine terms. It provides an invaluable reference book for anyone interested in the captivating subject of sport. PURPOSE This dictionary aims to include almost every sports science, anatomy, physiology, biomechanical, injuries description, and psychological term as related to sports medicine and science and support the explanations by illustrations wherever necessary. AUDIEN...

  14. Press Start

    Harteveld, Casper

    This level sets the stage for the design philosophy called “Triadic Game Design” (TGD). This design philosophy can be summarized with the following sentence: it takes two to tango, but it takes three to design a meaningful game or a game with a purpose. Before the philosophy is further explained, this level will first delve into what is meant by a meaningful game or a game with a purpose. Many terms and definitions have seen the light and in this book I will specifically orient at digital games that aim to have an effect beyond the context of the game itself. Subsequently, a historical overview is given of the usage of games with a serious purpose which starts from the moment we human beings started to walk on our feet till our contemporary society. It turns out that we have been using games for all kinds of non-entertainment purposes for already quite a long time. With this introductory material in the back of our minds, I will explain the concept of TGD by means of a puzzle. After that, the protagonist of this book, the game Levee Patroller, is introduced. Based on the development of this game, the idea of TGD, which stresses to balance three different worlds, the worlds of Reality, Meaning, and Play, came into being. Interested? Then I suggest to quickly “press start!”

  15. Georges et les secrets de l'univers

    Hawking, Lucy; Galfard, Christophe; Parsons, Gary

    2011-01-01

    Un voyage ex-tra-or-di-naire dans l'Univers! Le jour où Georges rencontre ses nouveaux voisins, il est loin d'imaginer que sa vision du monde va être totalement bouleversée. Chez la jeune Annie et Éric, son scientifique de père, le garçon découvre Cosmos, l'ordinateur le plus perfectionné qui soit. Sa super intelligence permet de protéger Georges et ses amis aux quatre coins de l'Univers ! Hélas, quelqu'un nourrit de sombres projets... et quand on sait qu'il n y a rien de plus dangereux dans l'espace qu'un trou noir, il y a du souci à se faire ! Un roman essentiel sur l'Univers avec les découvertes de Stephen Hawking.

  16. Development of thermoluminescence dating techniques at Oxford

    Fleming, S.J.

    1977-01-01

    The two-decade long history of thermoluminescene as a pottery dating method is surveyed with particular reference to the various problems that have been encountered in the Oxford Laboratory's research programme. Effects, such as supralinearity and radon emanation, are explained in terms of how they are measured and how their existence influences thermoluminescence (TL) dating accuracy (currently close to plus minus 7% per analysis). Illustrations of Thermoluminescence (TL) applications include a Nok culture terracotta from Nigeria and a Cambodia bronze Buddha figure of the Khmer period, dated ising the ceramic-like casting-core retained within it. (author)

  17. Recent results from the Oxford EBIT

    Crosby, David N [Clarendon Laboratory, Parks Road, Oxford, OX1 3PU (United Kingdom); Ezekiel, Toleme Z [Clarendon Laboratory, Parks Road, Oxford, OX1 3PU (United Kingdom); Green, Felicia M [National Physical Laboratory, Teddington, TW11 0LW (United Kingdom); Smith, Claire J [Clarendon Laboratory, Parks Road, Oxford, OX1 3PU (United Kingdom); Silver, Joshua D [Clarendon Laboratory, Parks Road, Oxford, OX1 3PU (United Kingdom)

    2004-01-01

    Here we summarise the present status of the experimental programme of the Oxford electron beam ion trap. Most notably this research has recently culminated in the successful measurement of the 2s{sub 1/2}-2p{sub 3/2} transition in hydrogenlike nitrogen by a laser resonance method. We also introduce preliminary results from some computational investigations of both electron beam transport and the trapped ion ensemble. In particular, we show that the contribution of the magnetic field to ion confinement has a potentially measurable effect on the ion phase space distribution.

  18. Oxford CyberSEM: remote microscopy

    Rahman, M; Kirkland, A; Cockayne, D; Meyer, R

    2008-01-01

    The Internet has enabled researchers to communicate over vast geographical distances, sharing ideas and documents. e-Science, underpinned by Grid and Web Services, has enabled electronic communications to the next level where, in addition to document sharing, researchers can increasingly control high precision scientific instruments over the network. The Oxford CyberSEM project developed a simple Java applet via which samples placed in a JEOL 5510LV Scanning Electron Microscope (SEM) can be manipulated and examined collaboratively over the Internet. Designed with schoolchildren in mind, CyberSEM does not require any additional hardware or software other than a generic Java-enabled web browser. This paper reflects on both the technical and social challenges in designing real-time systems for controlling scientific equipments in collaborative environments. Furthermore, it proposes potential deployment beyond the classroom setting.

  19. OXFORD DICTIONARY OF SPORTS SCIENCE AND MEDICINE

    Michael Kent

    2007-03-01

    Full Text Available DESCRIPTION The Oxford Dictionary of Sports Science and Medicine provides reliable definitions of sports science and medicine terms. It provides an invaluable reference book for anyone interested in the captivating subject of sport. PURPOSE This dictionary aims to include almost every sports science, anatomy, physiology, biomechanical, injuries description, and psychological term as related to sports medicine and science and support the explanations by illustrations wherever necessary. AUDIENCE As a comprehensive dictionary of sports science and medicine, it will be of particular help to medical specialists and general practitioners, as well as students of PE, coaches, and athletes who need to understand the anatomical structures and physiological processes which affect athletic performance. Any member of public interested in health and fitness; exercise and sport or wants to understand what the obscure terms mean, like jogger's nipple, social loafing, and Zatopek phenomenon will also benefit from this book. FEATURES The Oxford Dictionary of Sports Science and Medicine features terms in A to Z fashion at all the major areas of sports science and medicine including: anatomy, physiology/exercise physiology, biomechanics, training principles and techniques, nutrition, sports psychology and sociology, sports injuries and rehabilitation. A team of prominent contributors and advisers put together this dictionary in the first edition. The third edition includes around 8000 cross-referenced terms which have been updated or added since the first edition. There are plenty of illustrations wherever appropriate to make the terms easily understandable. ASSESSMENT A must-have dictionary for all medics practising in sports and exercise medicine, as well as students of medicine, physical education, nursing and physiotherapy. Even coaches, trainers, biomechanical experts; in fact anyone who has a special interest in this area will find this dictionary useful.

  20. The new Oxford dictionary of English

    Hanks, Patrick

    1998-01-01

    This dictionary focuses on English as it is really used in the late 20th century, informed by available evidence and thinking. Its defining style makes it possible to give the most complete picture of English as it is used today, providing authoritative and comprehensive coverage of the language. Compiled after in-depth analysis of computerized databases of current English, this dictionary is the first to base its coverage on the evidence of real English. Accessibility is one of the dictionary's key aims; a rapid-reference page design separates out parts of speech, word histories, phrases, and derivatives to make information easy to find, and the most modern meaning of each word, as used by the majority of people, is placed first within each entry. Contemporary rules are given on question of usage, providing relevant advice on problems old and new. Word history notes not only explain the linguistic roots of words, but also tell the story of how a word's meaning and form have changed over time. Oxford's worldw...

  1. The Oxford SWIFT integral field spectrograph

    Thatte, Niranjan; Tecza, Matthias; Clarke, Fraser; Goodsall, Timothy; Lynn, James; Freeman, David; Davies, Roger L.

    2006-06-01

    We present the design of the Oxford SWIFT integral field spectrograph, a dedicated I and z band instrument (0.65μm micron - 1.0μm micron at R~4000), designed to be used in conjunction with the Palomar laser guide star adaptive optics system (PALAO, and its planned upgrade PALM-3000). It builds on two recent developments (i) the improved ability of second generation adaptive optics systems to correct for atmospheric turbulence at wavelengths less than or equal to 1μm micron, and (ii) the availability of CCD array detectors with high quantum efficiency at very red wavelengths (close to the silicon band edge). Combining these with a state-of-the-art integral field unit design using an all-glass image slicer, SWIFT's design provides very high throughput and low scattered light. SWIFT simultaneously provides spectra of ~4000 spatial elements, arranged in a rectangular field-of-view of 44 × 89 pixels. It has three on-the-fly selectable pixel scales of 0.24", 0.16" and 0.08'. First light is expected in spring 2008.

  2. The Oxford History of English Lexicography. Volume I: General ...

    A.P. Cowie (Editor). The Oxford History of English Lexicography. Volume I: General-purpose Dictionaries. Volume II: Specialized Dictionaries. 2009. Volume I: xviii + 467 pp., Volume II: xix + 551 pp. ISBN Volume I–II: 978-0-19-928562-4. Volume I: 978-0-19-928560-0. Volume II: 978-0-19-928561-7. Oxford: Oxford University ...

  3. Cosmologie l'univers avant le Big Bang

    Larousserie, David

    2003-01-01

    Tout n'a pas commencé par une explosion. L'histoire du cosmos avait débuté bien avant le Big Bang, si l'on suit la théorie défendue par les partisans d'une nouvelle cosmologie issue de la mystérieuse théorie des cords. A l'heure où vacillent les scénarios classiques du XXe siècle, se prépare un grand chamboulement de nos idées sur la naissance de l'Univers et son devenir, sur l'existence possible d'univers parallèles.

  4. L'Univers dans une coquille de noix

    Hawking, Stephen

    2001-01-01

    Après Une brève histoire du temps et Trous noirs et bébés univers, Stephen Hawking fait le point sur les stupéfiantes percées théoriques qui ont eu lieu depuis la publication de son précédent livre. Avec le style à la fois érudit et accessible qui le caractérise, il nous fait découvrir tour à tour la relativité einsteinienne, le principe d'incertitude, la mécanique quantique, les cinq théories des cordes, la théorie M et les mystérieuses p-branes - voie d'accès, peut-être, au Graal de la physique : la " théorie de tout ". Nous faisant partager l'enthousiasme croissant de la communauté scientifique, il nous guide, telle Alice au pays des merveilles, à travers un univers à onze dimensions qui ne correspond peut-être qu'à l'une des innombrables histoires alternatives dans lesquelles les trous noirs s'évaporent, les supercordes s'enroulent sur elles-mêmes et des univers parallèles se contractent jusqu'à disparaître.

  5. La plénitude de l'Univers

    Bohm, David

    1987-01-01

    "Selon les calculs de Bohm, chaque centimètre cube d'espace vide contient plus d'énergie que ce qu'on pourrait trouver dans toute la matière de l'univers connu. L'univers entier, tel que nous le connaissons, n'est qu'une simple petite trace d'excitation quantifiée en forme de vague, une ride dans cet immense océan d'énergie cosmique. C'est cet arrière-plan énergétique caché qui engendre les projections tridimensionnelles constituant le monde phénoménal que nous percevons dans notre vie de tous les jours... " N'importe quel événement, objet ou entité, observable et descriptible, quel qu'il soit, est abstrait, d'un flux uni, indéfinissable et inconnu, le holomouvement... " David Bohm offre une nouvelle vision globale du monde qui représente une révision radicale de l'image de l'univers découlant de la science traditionnelle. Bien qu'inspiré à l'origine par les paradoxes de la physique quantique relativiste, son modèle offre de profondes implications concernant un vaste éventail de discipl...

  6. Review of: Ancient Scandinavia: An Archaeological History from the First Humans to the Vikings (Oxford University Press, Oxford, 2016) T. Douglas Price

    Løvschal, Mette

    2017-01-01

    , barrows and megaliths that still mark the present-day landscape and bear witness to an intriguing prehistory. One of the important factors involved in the discovery of these archaeological remains is the nature of Scandinavian landscapes, riddled as they are with wet marshes, bogs, rivers and flooded......), providing better opportunities for strategic sampling and systematic data storage than in many other regions of Europe. This book draws together the main historical lines in this rich body of archaeological remains from Scandinavian prehistory from the arrival of the first reindeer hunters after the last...

  7. Hamilton Alaistar, The Copts and the West, 1439-1822, The European Discovery of the Egyptian Church, Oxford, Oxford University Press, 2006, 338 p.

    Aurélien Girard

    2007-07-01

    Full Text Available Dès le titre, le livre annonce son point de vue : il ne s’agit pas d’une histoire des Coptes mais d’une histoire de la découverte par les Européens de l’Église égyptienne. L’auteur, Alaistar Hamilton, a déjà consacré d’importants travaux à l’histoire de l’orientalisme à l’époque moderne. Son étude commence en 1439 lorsque la décision est prise au concile de Florence (1438-1445 d’inviter la première délégation officielle copte en Europe. À cette occasion, des manuscrits coptes et coptes-arabe...

  8. Une invitation au voyage dans l'univers

    Garay, Corinne

    2009-01-01

    "Philippe de la Catardière, écrivain et journaliste originaire de Priay, publie un essai chez l'Archipel. "Comsmologie à usage du piéton". Il vulgarise pour le grand public les connaissances sur le ciel et l'étude de l'univers. Sa passion pour l'astronomie est née dans son enfance en regardant les ciels étoilés... elle ne l'a plus quitté" (2 pages)

  9. News/Press Releases

    Office of Personnel Management — A press release, news release, media release, press statement is written communication directed at members of the news media for the purpose of announcing programs...

  10. Reciprocating pellet press

    Jones, Charles W.

    1981-04-07

    A machine for pressing loose powder into pellets using a series of reciprocating motions has an interchangeable punch and die as its only accurately machines parts. The machine reciprocates horizontally between powder receiving and pressing positions. It reciprocates vertically to press, strip and release a pellet.

  11. The Global University Press

    Dougherty, Peter J.

    2012-01-01

    The modern world's understanding of American university press has long been shaped by university-press books. American university-press books are good international advertisements for the universities whose logos grace their spines. The growth of transnational scholarship and the expansion of digital communications networks are converging in ways…

  12. WordPress Bible

    Brazell, Aaron

    2010-01-01

    The WordPress Bible provides a complete and thorough guide to the largest self hosted blogging tool. This guide starts by covering the basics of WordPress such as installing and the principles of blogging, marketing and social media interaction, but then quickly ramps the reader up to more intermediate to advanced level topics such as plugins, WordPress Loop, themes and templates, custom fields, caching, security and more. The WordPress Bible is the only complete resource one needs to learning WordPress from beginning to end.

  13. News from the Library: You need never be lost for words again - Oxford Reference Online and Oxford Dictionaries Pro

    CERN Library

    2012-01-01

    Whether you are looking for an English word definition or want to check the correct usage of a word, we can offer you a solution: Oxford Reference Online.   It includes a wide range of monolingual and bilingual dictionaries, but also subject-specific reference books on physics, astronomy or mathematics. All these works are fully indexed and cross-searchable. Two highlights from this vast collection of reference works are the Concise Oxford English Dictionary and the Oxford Dictionary of English, which is the online counterpart of the compact, single-volume dictionary of current English language. As the name says, Oxford Dictionaries Pro focuses on language dictionaries. Particularly noteworthy are the dictionaries for writers and editors. On a dedicated web page you will find access to: - The "New Hart's Rules", providing information on all aspects of writing and preparing copy for publication, whether in print or electronically - The New Oxford Dictionary for Wri...

  14. Women leadership in Oxford House: examining their strengths and challenges.

    Davis, Margaret I; Dziekan, Marta M; Horin, Elizabeth V; Jason, Leonard A; Ferrari, Joseph R; Olson, Bradley D

    2006-01-01

    This study examined the perspectives and definition of leadership by women and mothers with children (n = 40) affiliated with Oxford Houses, a communal mutual-help recovery setting. Participants were asked questions relating to their experiences living in an Oxford House including the strengths and challenges encountered and how leadership impacted the stability in their house. Results illustrated the value of female leadership and highlighted the characteristics deemed important for women leaders in Oxford House, as well as some differences between these women's perception of leadership and the standard definition of leadership. The implications of the findings and how they may be useful to women's and mothers' with children houses are discussed.

  15. Oxford engineering students to study new solutions for vacuum chambers

    Department of Engineering Science - University of Oxford

    2012-01-01

    In April, eleven engineering science students in their third year at Oxford University were invited here to present their design ideas for new vacuum chamber materials to be used in accelerators. We publish below an abstract of the article that the University of Oxford featured on its website.   The 11 Oxford students who worked at CERN on alternatives to beryllium in vacuum chambers. (Photo courtesy of the Department of Engineering Science, University of Oxford.) Engineering Science students invited to design for CERN’s Large Hadron Collider In April, eleven Engineering Science students in their third year were invited to the CERN laboratory in Geneva to present their ideas for new vacuum chamber designs for the experiments of the Large Hadron Collider (LHC). Their design objectives were to propose alternatives to beryllium – the material used for some of the existing experimental vacuum chambers. Beryllium (chemical element with the symbol Be and atomic number 4) is to...

  16. Hot-pressed geopolymer

    Ranjbar, Navid; Mehrali, Mohammad; Maheri, Mahmoud R.

    2017-01-01

    This research explores the use of simultaneous heating and pressing techniques in order to enhance the mechanical properties of fly ash (FA) based geopolymer under relatively low temperature conditions to ensure minimum-porosity. Four effective parameters of pressing force, alkali activator...

  17. Introducing Collabra, OA Journal from University of California Press

    Morgan, Daniel

    2015-01-01

    An introductory presentation of Collabra, the open access mega journal from University of California Press, highlighting its unique business model which shares and spreads revenue back to the research community. (Presented at the FORCE 2015 conference at the University of Oxford, January 13, 2015.)

  18. Early recovery after fast-track Oxford unicompartmental knee arthroplasty

    Munk, Stig; Dalsgaard, Jesper; Bjerggaard, Karin

    2012-01-01

    trauma. We investigated changes in leg-extension power (LEP) in the first month after MIS Oxford UKA and its relation to pain, knee motion, functional performance, and knee function. Patients and methods In 35 consecutive Oxford UKA patients, LEP was measured 1 week before and 1 month after surgery...... together with knee motion, knee swelling, the 30-second chair-stand test, and Oxford knee score. Assessment of knee pain at rest and walking was done using a visual analog scale. Results 30 patients were discharged on the day after surgery, and 5 on the second day after surgery. LEP and functional...... performance reached the preoperative level after 1 month. Only slight postoperative knee swelling was observed with rapid restoration of knee flexion and function. A high level of pain during the first postoperative night and day fell considerably thereafter. None of the patients needed physiotherapy...

  19. WordPress Bible

    Brazell, Aaron

    2011-01-01

    Get the latest word on the biggest self-hosted blogging tool on the marketWithin a week of the announcement of WordPress 3.0, it had been downloaded over a million times. Now you can get on the bandwagon of this popular open-source blogging tool with WordPress Bible, 2nd Edition. Whether you're a casual blogger or programming pro, this comprehensive guide covers the latest version of WordPress, from the basics through advanced application development. If you want to thoroughly learn WordPress, this is the book you need to succeed.Explores the principles of blogging, marketing, and social media

  20. Two layer powder pressing

    Schreiner, H.

    1979-01-01

    First, significance and advantages of sintered materials consisting of two layers are pointed out. By means of the two layer powder pressing technique metal powders are formed resulting in compacts with high accuracy of shape and mass. Attributes of basic powders, different filling methods and pressing techniques are discussed. The described technique is supposed to find further applications in the field of two layer compacts in the near future

  1. Validation of the Danish version of Oxford Shoulder Score

    Frich, Lars Henrik; Noergaard, Peter Moensted; Brorson, Stig

    2011-01-01

    The Oxford Shoulder Score (OSS) is a patient-administered condition-specific questionnaire for patients with degenerative or inflammatory shoulder disease. The purpose of this study was to validate a Danish translation of the OSS and to compare it with the Constant Score (CS).......The Oxford Shoulder Score (OSS) is a patient-administered condition-specific questionnaire for patients with degenerative or inflammatory shoulder disease. The purpose of this study was to validate a Danish translation of the OSS and to compare it with the Constant Score (CS)....

  2. Si tu devais me dessiner l'Univers

    Saison-Marsollier, Sandrine; Pralavorio, Corinne; Spiro, Michel; Goldberg, Marc

    2015-01-01

    Le CERN a lancé en 2014 un concours de dessins dans les classes de primaire des villes des environs : les enfants étaient invités à s’interroger sur l’Univers, la matière et le métier de chercheur. Le succès de l’opération a été tel qu’il a été décidé d’en faire un livre que l’enseignant pourra parcourir en classe avec ses élèves, discuter avec eux des questions et découvrir ensemble les réponses. Le livre est en effet construit ainsi : sur une double page la question que s’est posée l’enfant et le dessin l’illustrant trouvent leur réponse sur la page d’en face, via un court texte écrit par le chercheur référent (Michel Spiro), qu’accompagne une citation tirée du domaine culturel, destinée à montrer les passerelles entre science, littérature et philosophie. Exemples de questions : Qu’y avait-il avant le Big Bang ? Les chercheurs sont-ils des personnes comme les autres ? Pourquoi les lois de la physique ne changent-elles pas ? Peut-on attraper les particules ?...

  3. Einstein dans l'Univers - French version only

    2005-01-01

    Dans le cadre de l'Année internationale de la physique, la section de physique de l'Université de Genève organise une série de conférences pour les non-initiés. Chacune des conférences débute par une démonstration de détection de rayons cosmiques dans l'auditoire et l'utilisation de ces signaux venus du fond de l'Univers pour créer une « musique cosmique », en collaboration avec le Professeur Ellberger du Conservatoire de musique de Genève. La cinquième conférence, donnée par le professeur Michele Maggiore de l'Université de Genève, s'intéresse à l'une des contributions les plus remarquables d'Einstein, la relativité générale. L'une des prédictions de cette théorie est l'existence des ondes gravitationnelles, véritables vibrations de l'espace-temps qui peuve...

  4. Damage Mechanisms and Controlled Crack Propagation in a Hot Pressed Silicon Nitride Ceramic. Ph.D. Thesis - Northwestern Univ., 1993

    Calomino, Anthony Martin

    1994-01-01

    The subcritical growth of cracks from pre-existing flaws in ceramics can severely affect the structural reliability of a material. The ability to directly observe subcritical crack growth and rigorously analyze its influence on fracture behavior is important for an accurate assessment of material performance. A Mode I fracture specimen and loading method has been developed which permits the observation of stable, subcritical crack extension in monolithic and toughened ceramics. The test specimen and procedure has demonstrated its ability to generate and stably propagate sharp, through-thickness cracks in brittle high modulus materials. Crack growth for an aluminum oxide ceramic was observed to be continuously stable throughout testing. Conversely, the fracture behavior of a silicon nitride ceramic exhibited crack growth as a series of subcritical extensions which are interrupted by dynamic propagation. Dynamic initiation and arrest fracture resistance measurements for the silicon nitride averaged 67 and 48 J/sq m, respectively. The dynamic initiation event was observed to be sudden and explosive. Increments of subcritical crack growth contributed to a 40 percent increase in fracture resistance before dynamic initiation. Subcritical crack growth visibly marked the fracture surface with an increase in surface roughness. Increments of subcritical crack growth loosen ceramic material near the fracture surface and the fracture debris is easily removed by a replication technique. Fracture debris is viewed as evidence that both crack bridging and subsurface microcracking may be some of the mechanisms contributing to the increase in fracture resistance. A Statistical Fracture Mechanics model specifically developed to address subcritical crack growth and fracture reliability is used together with a damaged zone of material at the crack tip to model experimental results. A Monte Carlo simulation of the actual experiments was used to establish a set of modeling input parameters. It was demonstrated that a single critical parameter does not characterize the conditions required for dynamic initiation. Experimental measurements for critical crack lengths, and the energy release rates exhibit significant scatter. The resulting output of the model produces good agreement with both the average values and scatter of experimental measurements.

  5. The Courtrai chest from New College, Oxford, re-examined

    Hall, E.T.

    1987-01-01

    The paper concerns the age estimation of the Courtrai chest from New College Oxford, using the accelerator mass spectrometer method. Radiocarbon dating of the wood in the chest revealed a date around 1280, which is in agreement with dates determined using the dendrochronological technique. (UK)

  6. Classic Classroom Activities: The Oxford Picture Dictionary Program.

    Weiss, Renee; Adelson-Goldstein, Jayme; Shapiro, Norma

    This teacher resource book offers over 100 reproducible communicative practice activities and 768 picture cards based on the vocabulary of the Oxford Picture Dictionary. Teacher's notes and instructions, including adaptations for multilevel classes, are provided. The activities book has up-to-date art and graphics, explaining over 3700 words. The…

  7. Validation of the Danish version of the Oxford Elbow Score

    Plaschke, Hans Christian; Jørgensen, Andreas Møller; Thillemann, Theis Muncholm

    2013-01-01

    The Oxford Elbow Score (OES) is a patient-related outcome measure quantifying quality of life in relation to elbow disorders. This 12-item patient-administered English questionnaire comprises three domains: function, social-psychological status and pain. The purpose of this study was to examine...

  8. An Analysis of the Oxford Bilingual School Dictionary: Northern ...

    The Oxford Bilingual School Dictionary: Northern Sotho and English (De Schryver 2007) is a welcome addition to dictionaries that have been compiled for school use in particular. Its novelty and appeal lie in the fact that the lemmas and Northern Sotho mini-grammar are based on a corpus of general language usage and ...

  9. PEOPLE IN PHYSICS: Interview with Scott Durow, Software Engineer, Oxford

    Burton, Conducted by Paul

    1998-05-01

    Scott Durow was educated at Bootham School, York. He studied Physics, Mathematics and Chemistry to A-level and went on to Nottingham University to read Medical Physics. After graduating from Nottingham he embarked on his present career as a Software Engineer based in Oxford. He is a musician in his spare time, as a member of a band and playing the French horn.

  10. Changing Traditions: Automation and the Oxford College Libraries.

    Bell, Suzanne

    1990-01-01

    Discussion of automation in the Oxford College Libraries (England) begins with background on the university library system, which consists of numerous independent libraries. Centralized and decentralized automation activities are described, and hardware and software for the microcomputer-based system at the University College Library are…

  11. RESENHA: BROADIE, A. Introduction to medieval logic. Segunda edição. Oxford: Clarendon Press, 2002.

    Alexandre Cabeceiras

    2011-05-01

    Full Text Available Nessa obra, Broadie, após discutir qual seria a melhor ordem de exposição paraum texto sobre lógica medieval, decide tratar primeiro dos termos, depois dasproposições e, por fim, das inferências. Mas, não se restringindo ao que era uniforme oupredominante na Idade Média, explora disputas envolvendo lógicos ou filósofos daqueleperíodo. Delimitando seu objeto, estabelece que a obra lidará, hegemonicamente, commaterial produzido no período entre a segunda metade do século XIII e o final do séculoXV, por considerar essa a fase mais produtiva no que se refere à lógica medieval.

  12. Book review: ALMOG, J. Referential Mechanics: Direct Reference and the Foundations of Semantics (Oxford University Press, 2014

    Filipe Martone

    Full Text Available Abstract: In this review I discuss Joseph Almog's book "Referential Mechanics". The book discusses direct reference as conceived by three of its founding fathers, Kripke, Kaplan and Donnellan, and introduces Almog's ambitious project of providing a referential semantics to all subject-phrases. I offer a brief overview of its four chapters and point out some of their virtues and shortcomings.

  13. ALUMINUM BOX BUNDLING PRESS

    Iosif DUMITRESCU

    2015-05-01

    Full Text Available In municipal solid waste, aluminum is the main nonferrous metal, approximately 80- 85% of the total nonferrous metals. The income per ton gained from aluminum recuperation is 20 times higher than from glass, steel boxes or paper recuperation. The object of this paper is the design of a 300 kN press for aluminum box bundling.

  14. DSS / Press Room

    Defense Security Service, U.S. Department of Defense Site Map | A-Z Index | Facebook | Twitter Locations Press Room Organizational Structure Careers at DSS Doing Business with DSS Frequently Asked Classification System (NCCS) National Industrial Security System (NISS) ODAA Business Management System (OBMS

  15. OAS :: Press Releases

    subscriptions Videos Photos Live Webcast Social Media Facebook @oasofficial Facebook Twitter @oas_official Social Media Facebook Twitter Newsletters Press and Communications Department Contact us at: +1 (202) 370 Rights Actions against Corruption C Children Civil Registry Civil Society Contact Us Culture Cyber

  16. bbPress complete

    Wynne, Rhys

    2013-01-01

    A concise guide, written in an easy-to-follow format.This book is aimed at ambitious website or blog owners looking to add a forum to their site quickly and easily. Basic experience in WordPress and with managing a website is expected. Knowledge of HTML and PHP will be a bonus, though it isn't necessary.

  17. A la poursuite des ondes gravitationnelles dernières nouvelles de l'Univers

    Binétruy, Pierre

    2016-01-01

    Nous sommes habitués à observer la lumière des étoiles pour comprendre l’Univers. Ce n’est pourtant pas la radiation la plus présente dans l’Univers mais c’est celle que nous avons d’abord identifiée car nos yeux sont des « détecteurs de lumière ». Or l’Univers est mu par la gravité, non par la lumière. C’est donc la radiation associée, appelée onde gravitationnelle, qui est de première importance pour comprendre le fonctionnement de l’Univers. La détection des ondes gravitationnelles annoncée le 11 février 2016, par le détecteur américain Ligo, a fait l'effet d'une bombe dans les médias. Ce livre, rédigé par un acteur important de cette physique de pointe, nous décrit cet étrange univers gravitationnel qui s'ouvre à nous.

  18. Myths About Press Freedom

    Kaarle Nordenstreng

    2007-06-01

    Full Text Available This article intends to rectify three popular beliefs related to press freedom: (1 that the idea of a free marketplace of ideas with a self-righting truth belongs to original liberalism, (2 that UNESCO’s primary mission is to promote freedom of information, and (3 that the Universal Declaration of Human Rights provides legal safeguards for the media. These beliefs are shown, on the basis of the legacy of liberalism and documents of the international community, to be misleading myths. Instead of accurate readings of the idea of freedom, they serve as ideological positions which are harmful to democracy. The Millennium Declaration provides further proof that the international community has a much more balanced view of freedom of information than that typically held by media professionals. Therefore it is important to liberate the concept of press freedom from its ideological baggage.

  19. The Japanese Words Adopted into The Pocket Oxford Dictionary

    今里, 智晃

    1993-01-01

    This paper aims to give a comparative analysis of the six POD editions on the basis of the Japanese words adopted into them. There have been many words borrowed from Japanese into English. For example, bonze and sake2 were naturalized in English a long time ago.The new 1992 edition of The Pocket Oxford Dictionary contains 39 Japanese words, some of which are futon, ikebana and sumo. But, needless to say, karaoke must be one of the latest examples we can see in English dictionaries that are of...

  20. Progress in hot pressing

    Brodhag, C.; Thevenot, F.

    1988-01-01

    An experimental technique is described to study hot pressing of ceramics under conditions of controlled temperature and pressure during both the heating and final sintering stages. This method gives a better control of the final microstructure of the material. Transformation mechanisms can be studied during initial heating stage (impurity degasing, reaction, phase transformation, mechanical behavior of intergranular phase...) using computer control and graphical data representations. Some examples will be given for different systems studied in our laboratory: B (α, β, amorphous), B 12 O 2 (reaction of B + B 2 O 3 ), Si 3 N 4 ( + additives), TiN, Al 2 O 3 + AlON,ZrC

  1. The Oxford Participation and Activities Questionnaire: study protocol

    Morley D

    2013-12-01

    Full Text Available David Morley, Sarah Dummett, Laura Kelly, Jill Dawson, Ray Fitzpatrick, Crispin JenkinsonNuffield Department of Population Health, University of Oxford, Oxford, UKBackground: With an ageing population and increasing demands on health and social care services, there is growing importance attached to the management of long-term conditions, including maximizing the cost-effectiveness of treatments. In line with this, there is increasing emphasis on the need to keep people both active and participating in daily life. Consequently, it is essential that well developed and validated instruments that can meaningfully assess levels of participation and activity are widely available. Current measures, however, are largely focused on disability and rehabilitation, and there is no measure of activity or participation for generic use that fully meets the standards set by regulatory bodies such as the US Food and Drug Administration. Here we detail a protocol for the development and validation of a new patient-reported outcome measure (PROM for assessment of participation and activity in people experiencing a variety of health conditions, ie, the Oxford Participation and Activities Questionnaire (Ox-PAQ. The stages incorporated in its development are entirely in line with current regulations and represent best practice in the development of PROMs.Methods: Development of the Ox-PAQ is theoretically grounded in the World Health Organization International Classification of Functioning, Disability, and Health. The project incorporates a new strategy of engaging with stakeholders from the outset in an attempt to identify those characteristics of PROMs considered most important to a range of potential users. Items will be generated through interviews with patients from a range of conditions. Pretesting of the instrument will be via cognitive interviews and focus groups. A postal survey will be conducted, with data subject to factor and Rasch analysis in order to

  2. Validation of the Oxford Participation and Activities Questionnaire

    Morley D

    2016-06-01

    Full Text Available David Morley, Sarah Dummett, Laura Kelly, Jill Dawson, Ray Fitzpatrick, Crispin Jenkinson Health Services Research Unit, Nuffield Department of Population Health, University of Oxford, Oxford, UK Purpose: There is growing interest in the management of long-term conditions and in keeping people active and participating in the community. Testing the effectiveness of interventions that aim to affect activities and participation can be challenging without a well-developed, valid, and reliable instrument. This study therefore aims to develop a patient-reported outcome measure, the Oxford Participation and Activities Questionnaire (Ox-PAQ, which is theoretically grounded in the World Health Organization's International Classification of Functioning, Disability, and Health (ICF and fully compliant with current best practice guidelines. Methods: Questionnaire items generated from patient interviews and based on the nine chapters of the ICF were administered by postal survey to 386 people with three neurological conditions: motor neuron disease, multiple sclerosis, and Parkinson's disease. Participants also completed the Medical Outcomes Study (MOS 36-Item Short Form Health Survey (SF-36 and EQ-5D-5L. Results: Thus, 334 participants completed the survey, a response rate of 86.5%. Factor analysis techniques identified three Ox-PAQ domains, consisting of 23 items, accounting for 72.8% of variance. Internal reliability for the three domains was high (Cronbach's α: 0.81–0.96, as was test–retest reliability (intraclass correlation: 0.83–0.92. Concurrent validity was demonstrated through highly significant relationships with relevant domains of the MOS SF-36 and the EQ-5D-5L. Assessment of known-groups validity identified significant differences in Ox-PAQ scores among the three conditions included in the survey. Conclusion: Results suggest that the Ox-PAQ is a valid and reliable measure of participation and activity. The measure will now be validated in

  3. ISS Expedition 08 Press Kit

    National Aeronautics and Space Administration — Press kit for ISS mission Expedition 08 from 10/2003-04/2004. Press kits contain information about each mission overview, crew, mission timeline, benefits, and media...

  4. WordPress multisite administration

    Longren, Tyler

    2013-01-01

    This is a simple, concise guide with a step-by-step approach, packed with screenshots and examples to set up and manage a network blog using WordPress.WordPress Multisite Administration is ideal for anyone wanting to familiarize themselves with WordPress Multisite. You'll need to know the basics about WordPress, and having at least a broad understanding of HTML, CSS, and PHP will help, but isn't required.

  5. Le jardin des particules l'Univers tel que le voient les physiciens

    Kane, Gordon

    1996-01-01

    Que savons-nous de l'Univers ? Que nous reste-t-il encore à comprendre ? Ce livre explique de façon limpide - et non sans humour - comment les physiciens travaillent, quels sont leurs outils, leurs certitudes et leurs interrogations.

  6. Immigration et crise d'identite dans l'Univers Romanesque de Sami ...

    Immigration et crise d'identite dans l'Univers Romanesque de Sami Tchak. ... La littérature africaine du XXIème siècle a eu une grande transformation. Cela est dû au fait ... It is established that Sami Tchak takes profound interest in projecting and handling the themes of immigration and identity crisis in his novelistic world.

  7. Four Theories of the Press.

    Siebert, Fred S.; And Others

    A systematic understanding of the press requires an understanding of the social and political structures within which the press operates. This book discusses four theories that have determined the kind of press the Western world has had: authoritarian, libertarian, socially responsible, and Soviet communist. Each chapter discusses press…

  8. Which Freedom of the Press?

    Rytter, Jens Elo

    2010-01-01

    The article surveys the historical and current meaning of "Freedom of the Press" in constitutional and human rights law. Two different conceptions exist, the narrow one defining freedom of the press as the freedom of every one to publish without prior restraint, the broader one defining it as a...... privileged freedom of the organised press to gather and report on information of public interest. These two conceptions have very different answers to the question of whether the press should enjoy some privilege to be exempt from ordinary legislation when such legislation restricts the access of the press to inform...

  9. WordPress for dummies

    Sabin-Wilson, Lisa

    2014-01-01

    The bestselling WordPress guide, fully updated to cover the 2013 enhancements WordPress has millions of users, and this popular guide has sold more than 105,000 copies in its previous editions. With the newest releases of WordPress, author and WordPress expert Lisa Sabin-Wilson has completely updated the book to help you use and understand all the latest features. You'll learn about both the hosted WordPress.com version and the more flexible WordPress.org, which requires third-party hosting. Whether you're switching to WordPress from another blogging platform or just beginning to blog, you'll

  10. Oxford Nanopore MinION Sequencing and Genome Assembly

    Hengyun Lu

    2016-10-01

    Full Text Available The revolution of genome sequencing is continuing after the successful second-generation sequencing (SGS technology. The third-generation sequencing (TGS technology, led by Pacific Biosciences (PacBio, is progressing rapidly, moving from a technology once only capable of providing data for small genome analysis, or for performing targeted screening, to one that promises high quality de novo assembly and structural variation detection for human-sized genomes. In 2014, the MinION, the first commercial sequencer using nanopore technology, was released by Oxford Nanopore Technologies (ONT. MinION identifies DNA bases by measuring the changes in electrical conductivity generated as DNA strands pass through a biological pore. Its portability, affordability, and speed in data production makes it suitable for real-time applications, the release of the long read sequencer MinION has thus generated much excitement and interest in the genomics community. While de novo genome assemblies can be cheaply produced from SGS data, assembly continuity is often relatively poor, due to the limited ability of short reads to handle long repeats. Assembly quality can be greatly improved by using TGS long reads, since repetitive regions can be easily expanded into using longer sequencing lengths, despite having higher error rates at the base level. The potential of nanopore sequencing has been demonstrated by various studies in genome surveillance at locations where rapid and reliable sequencing is needed, but where resources are limited.

  11. The 'gender gap' in final examination results at Oxford University.

    Mellanby, J; Martin, M; O'Doherty, J

    2000-08-01

    A lower proportion of women than men obtain first class degrees at British universities (the so-called gender gap). At Oxford University, this difference is not seen in all degree subjects but is found both in some Arts and in some Science subjects. We have used a questionnaire administered under supervision to undergraduates 2 to 3 months before their final examination to assess factors which might be expected to affect examination performance. These included measures of verbal and non-verbal reasoning (Alice Heim AH6 test), self-esteem, motivation, responses to stresses of examinations and of personal relationships, happiness, risk-taking and working patterns. We have also obtained a detailed breakdown of the marks the students were given in the examination. Women scored higher on negative emotions while men scored higher on self-esteem, their perception of their own academic efficacy and on risk-taking strategies, but none of these factors predicted outcome. Verbal reasoning ability did predict outcome but there was no gender difference. Hence, it is concluded that the gender gap is not due to any of these individual differences and is more likely to be related to the nature of the academic assessment system.

  12. WordPress For Dummies

    Sabin-Wilson, Lisa

    2011-01-01

    The bestselling guide to WordPress, fully updated to help you get your blog going! Millions of bloggers rely on WordPress, the popular, free blogging platform. This guide covers all the features and improvements in the most up-to-date version of WordPress. Whether you are switching to WordPress from another blogging platform or just starting your first blog, you'll find the advice in this friendly guide gets you up to speed on both the free-hosted WordPress.com version and WordPress.org, which requires the purchase of web hosting services, and figure out which version is best for you. You'll b

  13. WordPress Top Plugins

    Corbin, Brandon

    2010-01-01

    Time flies when you're having fun. This is the right way to describe this WordPress Top Plugins book by Brandon Corbin. With real world examples and by showing you the perks of having these plugins installed on your websites, the author is all set to captivate your interest from start to end. Regardless of whether this is your first time working with WordPress, or you're a seasoned WordPress coding ninja, WordPress Top Plugins will walk you through finding and installing the best plugins for generating and sharing content, building communities and reader base, and generating real advertising r

  14. Validation of the Oxford Participation and Activities Questionnaire.

    Morley, David; Dummett, Sarah; Kelly, Laura; Dawson, Jill; Fitzpatrick, Ray; Jenkinson, Crispin

    2016-01-01

    There is growing interest in the management of long-term conditions and in keeping people active and participating in the community. Testing the effectiveness of interventions that aim to affect activities and participation can be challenging without a well-developed, valid, and reliable instrument. This study therefore aims to develop a patient-reported outcome measure, the Oxford Participation and Activities Questionnaire (Ox-PAQ), which is theoretically grounded in the World Health Organization's International Classification of Functioning, Disability, and Health (ICF) and fully compliant with current best practice guidelines. Questionnaire items generated from patient interviews and based on the nine chapters of the ICF were administered by postal survey to 386 people with three neurological conditions: motor neuron disease, multiple sclerosis, and Parkinson's disease. Participants also completed the Medical Outcomes Study (MOS) 36-Item Short Form Health Survey (SF-36) and EQ-5D-5L. Thus, 334 participants completed the survey, a response rate of 86.5%. Factor analysis techniques identified three Ox-PAQ domains, consisting of 23 items, accounting for 72.8% of variance. Internal reliability for the three domains was high (Cronbach's α: 0.81-0.96), as was test-retest reliability (intraclass correlation: 0.83-0.92). Concurrent validity was demonstrated through highly significant relationships with relevant domains of the MOS SF-36 and the EQ- 5D-5L. Assessment of known-groups validity identified significant differences in Ox-PAQ scores among the three conditions included in the survey. Results suggest that the Ox-PAQ is a valid and reliable measure of participation and activity. The measure will now be validated in a range of further conditions, and additional properties, such as responsiveness, will also be assessed in the next phase of the instrument's development.

  15. Comment fonctionne l’Univers ? Ce que le LHC peut nous apprendre

    CERN. Geneva

    2008-01-01

    L'Univers en son enfance était une "soupe" de particules, de plus en plus chaudes (de plus haute énergie) à mesure qu'on remonte vers sa naissance, le "big bang". C'est ainsi que les observations à des énergies de plus en plus élevées nous permettent, par exemple, de nous approcher de plus près de la prime jeunesse de l'Univers et, donc, de mieux le comprendre. L'étude du macro- et du micro-cosme sont une science unique dans laquelle, de façon surprenante, ce que nous comprenons le moins bien est le vide, qui ne semble pas l'être: il existe une différence fondamentale entre le vide et le néant. Le LHC pourrait nous permettre de voir les vibrations de la "substance" du vide, qu'on appelle les particules 'de Higgs'.

  16. ACADEMIC TRAINING (O. BRUNING / CERN-SL, S. TAPPROGGE / Helsinki Univ. of Physics, E. TSESMELIS / Helsinki Univ. of Physics , CERN-EST)

    Françoise Benz

    2002-01-01

    21, 22, 23 May LECTURE SERIES from 11.00 to 12.00 hrs - Auditorium, bldg. 500 The LHC Machine/Experiment Interface by O. BRUNING / CERN-SL, S. TAPPROGGE / Helsinki Univ. of Physics, E. TSESMELIS / Helsinki Univ. of Physics, CERN-EST     This series of three lectures will provide an overview of issues arising at the interface between the LHC machine and the experiments, which are required for guiding the interaction between the collider and the experiments when operation of the LHC commences. A basic description of the LHC Collider and its operating parameters, such as its energy, currents, bunch structure and luminosity, as well as variations on these parameters, will be given. Furthermore, the optics foreseen for the experimental insertions, the sources and intensities of beam losses and the running-in scenarios for the various phases of operation will be discussed. A second module will cover the specific requirements and expectations of each experiment in terms of the layout of experiment...

  17. LHC : sur la piste des mysteres de l`Univers par Michael Doser

    CERN. Geneva

    2007-01-01

    Le CERN, le plus grand centre en physique des particules au monde, va mettre en service le Grand collisionneur de hadrons (Large Hadron Collider), le LHC. Cette machine, le plus grand rouage du complexe d’accélérateurs du CERN, doit répondre aux énigmes qui subsistent sur les briques élémentaires de la matière et l’histoire de l’Univers.

  18. Support for ECHONET-based smart home environments in the universAAL ecosystem

    Pham, Van Cu; Lim, Yuto; Tan, Yasuo; Chong, Nak Young

    2018-01-01

    With the advent of information and communication technology, many Ambient Assisted Living (AAL) solutions are being proposed to increase the quality of life of elderly people and reduce health and social care costs. Among these AAL solutions, universAAL seems to be the most promising platform for easy and economical development of AAL services. However, in its current state, the platform is incompatible with smart home systems which are based on the ECHONET standard. This paper presents the b...

  19. Indre spenninger og ytre press

    Ibsen, Bjarne

    2011-01-01

    Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles.......Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles....

  20. BuddyPress theme development

    Lister, Tammie

    2013-01-01

    This book is a hands-on tutorial guide to using BuddyPress.This book is great for designers and developers who are looking to learn how to develop BuddyPress themes. It's assumed that the reader has some understanding of Wordpress and is familiar with CSS and HTML.

  1. All-in-one 3D printed microscopy chamber for multidimensional imaging, the UniverSlide

    Alessandri, Kevin; Andrique, Laetitia; Feyeux, Maxime; Bikfalvi, Andreas; Nassoy, Pierre; Recher, Gaëlle

    2017-02-01

    While live 3D high resolution microscopy techniques are developing rapidly, their use for biological applications is partially hampered by practical difficulties such as the lack of a versatile sample chamber. Here, we propose the design of a multi-usage observation chamber adapted for live 3D bio-imaging. We show the usefulness and practicality of this chamber, which we named the UniverSlide, for live imaging of two case examples, namely multicellular systems encapsulated in sub-millimeter hydrogel shells and zebrafish larvae. We also demonstrate its versatility and compatibility with all microscopy devices by using upright or inverted microscope configurations after loading the UniverSlide with fixed or living samples. Further, the device is applicable for medium/high throughput screening and automatized multi-position image acquisition, providing a constraint-free but stable and parallelized immobilization of the samples. The frame of the UniverSlide is fabricated using a stereolithography 3D printer, has the size of a microscopy slide, is autoclavable and sealed with a removable lid, which makes it suitable for use in a controlled culture environment. We describe in details how to build this chamber and we provide all the files necessary to print the different pieces in the lab.

  2. All-in-one 3D printed microscopy chamber for multidimensional imaging, the UniverSlide

    Alessandri, Kevin; Andrique, Laetitia; Feyeux, Maxime; Bikfalvi, Andreas; Nassoy, Pierre; Recher, Gaëlle

    2017-01-01

    While live 3D high resolution microscopy techniques are developing rapidly, their use for biological applications is partially hampered by practical difficulties such as the lack of a versatile sample chamber. Here, we propose the design of a multi-usage observation chamber adapted for live 3D bio-imaging. We show the usefulness and practicality of this chamber, which we named the UniverSlide, for live imaging of two case examples, namely multicellular systems encapsulated in sub-millimeter hydrogel shells and zebrafish larvae. We also demonstrate its versatility and compatibility with all microscopy devices by using upright or inverted microscope configurations after loading the UniverSlide with fixed or living samples. Further, the device is applicable for medium/high throughput screening and automatized multi-position image acquisition, providing a constraint-free but stable and parallelized immobilization of the samples. The frame of the UniverSlide is fabricated using a stereolithography 3D printer, has the size of a microscopy slide, is autoclavable and sealed with a removable lid, which makes it suitable for use in a controlled culture environment. We describe in details how to build this chamber and we provide all the files necessary to print the different pieces in the lab. PMID:28186188

  3. Big Bang et au-delà les nouveaux horizons de l'Univers

    Barrau, Aurélien

    2015-01-01

    Notre Univers a-t-il un début ? Est-il unique ? La science moderne a révolutionné notre compréhension de l’Univers. Bien que l’étude du cosmos soit sans doute aussi ancienne que la pensée, notre image du réel est en ce moment même en train de se redessiner. Il est maintenant possible de connaître certains aspects des processus qui eurent lieu moins d’un milliardième de milliardième de milliardième de seconde après le Big Bang. À la lumière des dernières découvertes du satellite Planck, Aurélien Barrau décrit en termes simples le cosmos qui se dessine sous nos yeux. Trous noirs, modèle standard de la physique des particules, gravité… les piliers et les énigmes du Big Bang sont abordés les uns après les autres, à la manière d’une balade aux origines de l’Univers. « Parce que la science est avant tout une aventure humaine, j’ai esquissé, ici et là, en contrepoint des explications physiques fournies dans la langue la plus simple et la plus accessible possible, mon expér...

  4. The Oxford Participation and Activities Questionnaire: study protocol.

    Morley, David; Dummett, Sarah; Kelly, Laura; Dawson, Jill; Fitzpatrick, Ray; Jenkinson, Crispin

    2013-01-01

    With an ageing population and increasing demands on health and social care services, there is growing importance attached to the management of long-term conditions, including maximizing the cost-effectiveness of treatments. In line with this, there is increasing emphasis on the need to keep people both active and participating in daily life. Consequently, it is essential that well developed and validated instruments that can meaningfully assess levels of participation and activity are widely available. Current measures, however, are largely focused on disability and rehabilitation, and there is no measure of activity or participation for generic use that fully meets the standards set by regulatory bodies such as the US Food and Drug Administration. Here we detail a protocol for the development and validation of a new patient-reported outcome measure (PROM) for assessment of participation and activity in people experiencing a variety of health conditions, ie, the Oxford Participation and Activities Questionnaire (Ox-PAQ). The stages incorporated in its development are entirely in line with current regulations and represent best practice in the development of PROMs. Development of the Ox-PAQ is theoretically grounded in the World Health Organization International Classification of Functioning, Disability, and Health. The project incorporates a new strategy of engaging with stakeholders from the outset in an attempt to identify those characteristics of PROMs considered most important to a range of potential users. Items will be generated through interviews with patients from a range of conditions. Pretesting of the instrument will be via cognitive interviews and focus groups. A postal survey will be conducted, with data subject to factor and Rasch analysis in order to identify appropriate dimensions and redundant items. Reliability will be assessed by Cronbach's alpha and item-total correlations. A second, large-scale postal survey will follow, with the Ox-PAQ being

  5. Head First WordPress

    Siarto, Jeff

    2010-01-01

    Whether you're promoting your business or writing about your travel adventures, Head First WordPress will teach you not only how to make your blog look unique and attention-grabbing, but also how to dig into the more complex features of WordPress 3.0 to make your website work well, too. You'll learn how to move beyond the standard WordPress look and feel by customizing your blog with your own URL, templates, plugin functionality, and more. As you learn, you'll be working with real WordPress files: The book's website provides pre-fab WordPress themes to download and work with as you follow al

  6. Smashing WordPress Themes Making WordPress Beautiful

    Hedengren, Thord Daniel

    2011-01-01

    The ultimate guide to WordPress Themes - one of the hottest topics on the web today WordPress is so much more than a blogging platform, and Smashing WordPress Themes teaches readers how to make it look any way they like - from a corporate site, to a photography gallery and moreWordPress is one of the hottest tools on the web today and is used by sites including The New York Times, Rolling Stone, flickr, CNN, NASA and of course Smashing MagazineBeautiful full colour throughout - web designers expect nothing lessSmashing Magazine will fully support this book by by promoting it through their webs

  7. Science coverage and the press

    Hawkes, N.

    1992-01-01

    The writer, a journalist, summarizes the discussion of the Chilton Seminar, February 1992, and discusses the problems of bridging the incomprehension gap between scientists and lay readers of the press. (Author)

  8. Hot-pressing steatite bodies

    Aparicio Arroyo, E.

    1967-01-01

    Requirements for some special nuclear engineering ceramic shapes are: big size, impervious, dimensional accuracy and good mechanical and dielectric properties. Limitations of te conventional methods and advantages of te hot pressing techniques for the manufacturing of these shapes are discussed. Hot pressing characteristics of a certain steatite powder are studied. Occurrence of an optimum densification temperature just above the tale decomposition range is found. Experimental data show that the height/diameter ratio of the specimen has no effect on the sintering conditions. Increasing darkness from the graphite mould is detected above the optimum temperature. The hot-pressed steatite is compared with a fired dry-pressed sample of the same composition. (Author) 13 refs

  9. Mathematical modelling of wet paper pressing

    Bežanovic, D.

    2005-01-01

    The aim of this project is to reduce energy costs in paper production by optimising the process in the press section of a paper machine. In this press section water is squeezed as it passes through the press nip. In a modern press section the moisture content of the sheet after three or four presses

  10. Antimatière Est-elle la clé de l'Univers?

    Grousson, Mathieu

    2009-01-01

    "De quoi est fait l'Univers? De matière ordinaire et, selon la théorie actuelle, de matière noire et d'énergie noire... dont nul ne sait rien! Et s'il s'agissait plutôt d'antimatière? Car elle permet de réécrire l'histoire du cosmos sans déroger à ses lois et, cette fois, sans nulle zone d'ombre. Reste à vérifier qu'elle antigravite bien..." (14 pages)

  11. L'univers créativité cosmique et créativité artistique

    Reeves, Hubert; Champion, Claire

    2016-01-01

    Avec le talent de vulgarisateur qu'on lui connaît, Hubert Reeves explique, en faisant d'habiles parallèles avec la créativité humaine, ce que l'on sait aujourd'hui de la création de l'Univers. Avec ses mots et ses idées simples, épurées comme des haïkus, Hubert Reeves arrive à faire comprendre l'infiniment complexe, tout en amenant ses lecteurs au bord du gouffre métaphysique.

  12. La forme de l’espace, des trous noirs à l’Univers chiffonné

    CERN. Geneva

    2006-01-01

    Trous noirs, forme de l’Univers, structure de l’espace-temps… Décrire la forme de notre espace a toujours mis en jeu de nombreux modèles géométriques, chacun impliquant une théorie physique sous-jacente. L'un des grands défis de la physique fondamentale du XXIe siècle est de visualiser la distorsion de l’espace-temps, engendrée par les champs gravitationnels et quantiques. La conférence sera illustrée par de spectaculaires animations issues de simulations d'ordinateur.

  13. Conférence de presse | Press Conference

    CERN. Geneva; Bejar Alonso, Isabel

    2018-01-01

    10:00-11:00 Conférence de presse en présence de Lucio Rossi, chef du projet LHC à Haute Luminosité et Isabel Bejar Alonso, chargée de la configuration, de la qualité et des ressources du projet LHC à Haute Luminosité.

  14. Investing in a Large Stretch Press

    Choate, M.; Nealson, W.; Jay, G.; Buss, W.

    1986-01-01

    Press for forming large aluminum parts from plates provides substantial economies. Study assessed advantages and disadvantages of investing in large stretch-forming press, and also developed procurement specification for press.

  15. Internal consistency reliability and validity of the Hebrew translation of the Oxford Happiness Inventory.

    Francis, L J; Katz, Y J

    2000-08-01

    The Hebrew translation of the Oxford Happiness Inventory and the short form Revised Eysenck Personality Questionnaire were completed by 298 undergraduate women in Israel. The findings confirm the internal reliability of the Hebrew translation of the Oxford Happiness Inventory and support the construct validity according to which "happiness is a thing called stable extraversion."

  16. G.-M. de Schryver (Editor. Oxford Bilingual School Dictionary: Zulu and English

    D.J. Prinsloo

    2011-10-01

    Full Text Available The Oxford Bilingual School Dictionary: Zulu and English (henceforth OZSD is the latest addition to the bidirectional English–isiZulu bilingual dictionary market and is based on the same successful and prize-winning formula used for the Oxford Northern Sotho School Dictionary (ONSD published in 2007.

  17. WordPress 3 Cookbook

    Shreves, Ric

    2011-01-01

    This is a Packt Cookbook, which means it contains step-by-step instructions to achieve a particular goal or solve a particular problem. There are plenty of screenshots and explained practical tasks to make comprehension quick and easy. This book is not specifically for developers or programmers; rather it can be used by anyone who wants to get more out of their WordPress blog by following step-by-step instructions. A basic knowledge of PHP/XHTML/CSS/WordPress is desirable but not necessary.

  18. Law and the Student Press.

    Stevens, George E.; Webster, John B.

    Court cases and legal decisions involving the student press in the late 1960s and early 1970s are brought together in this book in order to show how the law has been applied to school officials and student journalists in high school, college, and the underground. The ten chapters cover the following topics: censorship, libel, obscenity, contempt,…

  19. Local and international press digest

    2008-01-01

    The following are the top stories in the Maltese and the international press today. The Times gives prominence to the Prime Minister's flying visit to Geneva yesterday, where he signed a research cooperation agreement with CERN, the European nuclear research organisation.

  20. A new hot pressing technique

    Carcey, J.

    1975-01-01

    An original hot pressing method which may be applied to ceramics, metals, and refractory powders is described. The products obtained are fine grained polycristalline materials, with homogeneous structure, very high density, unstrained and of very large dimensions (several square meters). This process equally applies to composite materials including powders, fibers, etc.. [fr

  1. Presentation of the Book “The Golden Horde in World History” (Oxford, Great Britain, April 7–8, 2017

    L.S. Giniyatullina

    2017-06-01

    Full Text Available April 8, 2017 the multi-authored monograph “The Golden Horde in World History” (Kazan, Sh.Marjani Institute of History of Tatarstan Academy of Sciences Publ., 2017. 968 p. + 28 p. with colour insert was presented at the conference “Tatars in World History” (April 7–8, 2017, Oxford, Great Britain. The conference was organized by the University of Oxford and Sh.Marjani Institute of History of Tatarstan Academy of Sciences. The idea was also supported by the Ministry of Foreign Affairs of the Russian Federation, the World Congress of Tatars, the Alliance of Tatars of Europe and the Association of Tatars of Great Britain. The conference was opened with welcoming speeches by the deputy mayor of Oxford, Ray Hamberstone; Head of Sh.Marjani Institute of History of Tatarstan Academy of Sciences, Rafael Khakimov; famous British historian, specialist in early medieval Russia, the Caucasus and Byzantium, Professor Jonathan Shepard. Also the adviser on information, press and culture, Konstantin Shlykov, welcomed the guests and participants of the conference on behalf of the Embassy of the Russian Federation in the United Kingdom of Great Britain and Northern Ireland. In his welcoming address, Head of Sh.Marjani Institute of History of Tatarstan Academy of Sciences, Rafael Khakimov, noted that the monograph “The Golden Horde in World History” is the fruit of the joint work of the researchers of Sh.Marjani Institute of History of Tatarstan Academy of Sciences and the University of Oxford. Now these works are also available in English at the Bodleian Library of Oxford University. The chief editor of “The Golden Horde in World History”, a researcher at the University of Oxford, Marie Favereau, thanked colleagues from the Institute of History of Tatarstan Academy of Sciences and from the Institute of Russian History of the Russian Academy of Sciences for fruitful academic cooperation and stressed the importance of conducting further research on

  2. A press for the theater

    Luciana Penna França

    2017-12-01

    Full Text Available Understanding the history of the amateur theater at the end of the XIXth century and the beginning of the XXth is possible, largely, because of the newspapers dedicated to the “theatrical affairs”. Such publications are important for the quantity and the diversity, revealing not only the place occupied by the theater in the capital, but also for the recognition of the press as a means of disclosure of plays, public education and opinion, artist projection, etc, not to mention personal affairs and requests, and the exchange of favors among managers and journalists. Even more, the press production of the dramatic amateurs clubs demonstrate the understanding of its role in the dissemination of ways to act and think beyond the stage and in the everyday life.

  3. Pressing technology for large bottoms

    Jilek, L.

    1986-01-01

    The technology has been selected of a circular plate bent into the shape of a trough, for pressing bottoms of pressure vessels from a circular plate of large diameter. The initial sheet is first bent in the middle by heating with the edges remaining straight. These are then welded longitudinally by electroslag welding and the circular shape is flame cut. The result will be a plate with a straight surface in the middle with raised edges which may be pressed into the desired shape. In this manner it is also possible to press pressure vessel bottoms with tube couplings from plates which are thickened in the middle and drilled; additional welding is then eliminated. Deformation from heat treatment may be avoided by the use of a fixture in the shape of a ring with a groove into which is fixed the edge of the bottom. During hardening of the bottom it will be necessary to care for the withdrawal of vapours and gases which would hamper uniform cooling. Bottom hardening with the grill and the cupola downwards has been proven. Deformation which occurs during treatment may to a certain extent be removed by calibration which cannot, however, be made without special fixtures and instruments. (J.B.)

  4. Translation, cross-culturally adaptation and validation of the Danish version of Oxford Hip Score (OHS)

    Paulsen, Aksel

    there was no properly translated, adapted and validated Danish language version available, a translation to Danish, cross-culturally adaptation and validation of the Danish Oxford Hip Score was warranted. Material and Methods: We translated and cross-culturally adapted the Oxford Hip Score into Danish, in accordance......Objective: The Oxford Hip Score is a patient reported outcome questionnaire designed to assess pain and function in patients undergoing total hip arthroplaty (THA). The Oxford Hip Score is valid, reliable and consistent, and different language versions have been developed. Since.......9 % ceiling effect on this cohort of postoperative patients. Only in 1.2 % of the patients no sum score could be calculated, due to missing items. In relation to construct validity 80 % of predefined hypothesis were confirmed. The different items had an intraclass correlation in the range of 0...

  5. Phillip Louw: Oxford Afrikaans-Engels / English-Afrikaans Skoolwoordeboek / School Dictionary

    Anton F. Prinsloo

    2011-10-01

    Full Text Available Die Oxford Afrikaans–Engels/English–Afrikaans Skoolwoordeboek is as skoolwoor-deboek 'n puik hulpbron vir leerders. Dit is egter meer as net 'n woordeboek, soos wat 'n oorsig dadelik toon.

  6. Annotated catalogue of the types of Braconidae (Hymenoptera) in the Oxford University Museum

    Achterberg, van C.; O'Toole, C.

    1993-01-01

    An annotated catalogue of the types of Braconidae in the Hope Entomological Collections, University Museum, Oxford, is given. The following new combinations are proposed: Aleiodes rothneyi (Shenefelt, 1975); Aniphiaulax agraensis (Cameron, 1897); Balcemena ruficollis (Cameron, 1899); Bicarinibracon

  7. Modularity of Pressing Tools for Screw Press Producing Solid Biofuels

    Miloš Matúš

    2012-01-01

    Full Text Available This paper focuses on the development of the newly-patented structure of a screw briquetting machine for compacting biomass into a solid biofuel. The design of the machine is based on the results of a comprehensive study of the complicated process of biomass compaction. The patented structure meets two main goals: the elimination of axial forces, leading to increased lifetime of the bearings, and the new modular design of a pressing chamber and tools with their geometry based on the application of a mathematical model.

  8. La matière noire, clé de l'univers ?

    Combes, Françoise

    2015-01-01

    Si ces dernières années de nombreuses découvertes ont permis de mieux connaître notre Univers, 95 % de son contenu, constitué de matière et d énergie noires, nous est encore aujourd hui totalement inconnu. Quelle est la nature de cette matière noire, de ces particules exotiques, sans lesquelles ne pourraient se former les galaxies ? L ouvrage, rédigé par Françoise Combes astrophysicienne dont les travaux de recherche dans ce domaine sont unanimement reconnus fait le point sur l état actuel des connaissances, les découvertes les plus récentes et les prochains défis à relever.

  9. (Reprinted in Heuristics: The foundations of adaptive behavior, pp. 477-501, by G. Gigerenzer, R. Hertwig, & T. Pachur, Eds., 2011, New York: Oxford University Press)

    Pachur, T.; Hertwig, R.

    2006-01-01

    The recognition heuristic is a prime example of a boundedly rational mind tool that rests on an evolved capacity, recognition, and exploits environmental structures. When originally proposed, it was conjectured that no other probabilistic cue reverses the recognition-based inference (D. G. Goldstein & G. Gigerenzer, 2002). More recent studies challenged this view and gave rise to the argument that recognition enters inferences just like any other probabilistic cue. By linking research on the ...

  10. Taken Hostage. The Iran Hostage Crisis and America’s First Encounter with Radical Islam. Princeton et Oxford, Princeton University Press, 2005, 212 p.

    Kian-Thiébaut, Azadeh

    2007-01-01

    Spécialiste de l’histoire des États-Unis, l’A. a décidé d’écrire cet ouvrage sur la crise des otages à Téhéran après les attentats du 11 septembre 2001. Ces deux évènements sont certes très différents mais pour l’A. la crise des otages est le premier acte d’anti-américanisme d’envergure. A travers son ouvrage, D. Farber espère donc mettre en perspective les rapports tordus entre les États-Unis et les forces de l’islam politique. L’A. a entrepris des recherches dans les archives et analyse la ...

  11. "Book Review: FRANKFURT, Harry G. On Inequality. Princeton and Oxford: Princeton University Press, 2015, 102 pp., $14.95 (hbk, ISBN 9780691167145."

    Andrea Luisa Bucchile Faggion

    Full Text Available ABSTRACT On Inequality is a short book that skillfully handles a challenging topic. As its title suggests, its focus is a major theme in contemporary theories of justice: equality. Contrary to what one might expect, however, Frankfurt's critique of equality is not grounded in libertarian arguments or an ideal of the minimal state. Rather, it aims to clarify a cluster of alleged conceptual confusions about equality as a constitutive moral value.

  12. Brian Steensland, The Failed Welfare Revolution. America's Struggle over Guaranteed Income Policy, Princeton and Oxford, Princeton University Press, 2008, XII, 304 pp. [Ressenya de llibre

    Espuelas Barroso, Sergio

    2010-01-01

    A diferencia de lo que es habitual, el libro de Steensland se centra en la historia de un fracaso. El ascenso y declive de una propuesta para crear, primero durante el gobierno Nixon y después durante la era Carter, una Renta Mínima Garantizada en los Estados Unidos. ...

  13. Paul Laity, The British Peace Movement 1870-1914. Oxford,Clarendon Press; 2001. IX + 270 p. ISBN: 0 19 924835 4.

    Porter, Bernard

    2005-01-01

     « L’idée selon laquelle on pouvait abolir la guerre », dit Paul Laity dans ce livre, « a été plus répandue en Grande-Bretagne au XIXe siècle qu’au sein d’aucune autre puissance européenne. » C’est en premier lieu à cause de la sécurité géographique du pays, en raison de son insularité ; ensuite, l’in­fluence de la doctrine libre-échangiste, qui a toujours eu une forte composante pacifiste : les idéalistes du libéralisme comme Richard Cobden pensaient que quand les gens échangeraient libremen...

  14. WordPress Website Development

    Lassila, Joonas

    2016-01-01

    The aim of this Bachelor’s thesis was to develop a WordPress mobile-first style website for the customer, Pohjois-Suomen Pesis. The main purpose of the development was to learn website designing principles and create a responsive website for the mobile and desktop platforms. The development process began defining the requirements of the website and creating the requirements document. Then next step was learning how to design a website layout and to choose the colour scheme for the site. T...

  15. Smashing WordPress Beyond the Blog

    Hedengren, Thord Daniel

    2012-01-01

    The ultimate guide to WordPress, from the world's most popular resource for web designers and developers As one of the hottest tools on the web today for creating a blog, WordPress has evolved to be much more that just a blogging platform and has been pushed beyond its original purpose. With this new edition of a perennially popular WordPress resource, Smashing Magazine offers you the information you need so you can maximize the potential and power of WordPress. WordPress expert Thord Daniel Hedengren takes you beyond the basic blog to show you how to leverage the capabilities of WordPress to

  16. Teach yourself visually WordPress

    Majure, Janet

    2012-01-01

    Get your blog up and running with the latest version of WordPress WordPress is one of the most popular, easy-to-use blogging platforms and allows you to create a dynamic and engaging blog, even if you have no programming skills or experience. Ideal for the visual learner, Teach Yourself VISUALLY WordPress, Second Edition introduces you to the exciting possibilities of the newest version of WordPress and helps you get started, step by step, with creating and setting up a WordPress site. Author and experienced WordPress user Janet Majure shares advice, insight, and best practices for taking full

  17. La face cachée de l'Univers comment explorer les âges sombres et le contenu manquant?

    2011-01-01

    La matière connue n’est qu’une goutte d’eau dans l’Univers. De quoi celui-ci est-il majoritairement constitué ? Que sont ces étranges matière noire et énergie sombre ? Comment imaginer les débuts et la fin de l’Univers ? Y a-t-il même eu un début, ou l’Univers ne fait-il que se dilater et se contracter dans un éternel rebond ? Avec ce dossier, faites le point sur les grandes questions actuelles de la cosmologie.

  18. Prediction of Pressing Quality for Press-Fit Assembly Based on Press-Fit Curve and Maximum Press-Mounting Force

    Bo You

    2015-01-01

    Full Text Available In order to predict pressing quality of precision press-fit assembly, press-fit curves and maximum press-mounting force of press-fit assemblies were investigated by finite element analysis (FEA. The analysis was based on a 3D Solidworks model using the real dimensions of the microparts and the subsequent FEA model that was built using ANSYS Workbench. The press-fit process could thus be simulated on the basis of static structure analysis. To verify the FEA results, experiments were carried out using a press-mounting apparatus. The results show that the press-fit curves obtained by FEA agree closely with the curves obtained using the experimental method. In addition, the maximum press-mounting force calculated by FEA agrees with that obtained by the experimental method, with the maximum deviation being 4.6%, a value that can be tolerated. The comparison shows that the press-fit curve and max press-mounting force calculated by FEA can be used for predicting the pressing quality during precision press-fit assembly.

  19. Pellet presses for remote fuel fabrication

    Densley, P.J.

    1978-01-01

    Two types of mechanical presses are being tested from the remote operation and remote maintenance aspects. Results will be used to recommend the type of press and design considerations required for operation in a remotely operated and maintained process line

  20. Press to compress contaminated wastes drums

    Prevost, J.

    1993-01-01

    This patent describes a press for contaminated wastes drums pressing. The press is made of a structure comprising a base and an upper stringer bind to the base by vertical bearers, a compression system comprising a main cylinder and a ram, connected to the upper stringer

  1. IDEAL: ACADEMIC PRESS JOURNALS ONLINE

    The Library

    2001-01-01

    All Academic Press journals are available online to CERN users for a test period which will last until the end of July. The service 'IDEALIBRARY' includes 174 scientific journals that cover several domains, ranging from engineering to mathematics, computing and physics. Titles covered are among others 'Atomic Data and Nuclear Data Tables', 'Nuclear Data Sheets', 'Annals of Physics', 'Journal of Parallel and Distributed Computing'. Reference citations present in each article are linked to the corresponding full text, when the latter is published by a member of the CrossRef consortium (members are: Elsevier, APS, AIP and others). Therefore, the navigation between articles and references is uninterrupted. A search engine allows queries by author, title and publication year. See http://www.idealibrary.com. At present the Library is evaluating a site license offer proposed by the publisher.

  2. The Dictionary Unit for South African English. South African Concise Oxford Dictionary

    Rajend Mesthrie

    2011-01-01

    The South African Concise Oxford Dictionary (henceforth SACOD) is a South Af-rican version of the Concise Oxford Dictionary, the first time that this particular hybrid has been prepared. It is testimony to the enduring success of the work of the Dictionary Unit for South African English at Rhodes University, headed by teams that included Jean and William Branford in the 1970s, Penny Silva in the 1990s and now, Kathryn Kavanagh. The lexicographical work from the unit saw the publication of fou...

  3. Long term effects on potential repository sites: the alteration of the Lower Oxford Clay during weathering

    Milowdowski, A.E.; Bloodworth, A.J.; Wilmot, R.D.

    1985-09-01

    The report is one of a short series describing work carried out to investigate the long-term effects of various geological processes on the performance of both shallow and deep repositories for low and intermediate-level radioactive wastes. This paper deals with the alteration as a result of weathering of the Lower Oxford Clay, a potential host rock for shallow disposal of wastes. A description of the Lower Oxford Clay is given, along with the weathering of argillaceous rocks. Investigations of the weathering at the Elstow Storage Depot are described, as well as the implications for radioactive waste disposal. (U.K.)

  4. This is my neighborhood: comparing United States and Australian Oxford House Neighborhoods.

    Ferrari, Joseph R; Jason, Leonard A; Blake, Ron; Davis, Margaret I; Olson, Bradley D

    2006-01-01

    The number of Oxford Houses, communal-living, mutual help settings for persons in recovery of alcohol and substance abuse, has spread across the United States and recently in and around Melbourne, Australia. In this study 55 US and 6 AU Houses were compared descriptively for their neighborhood characteristics. Across settings, there were greater similarities than significant differences in the locations. Results imply that Australian Oxford Houses are "safe and sober" settings for persons in recovery consistent with the original United States model in physical dwelling settings.

  5. Professional WordPress design and development

    Williams, Brad; Stern, Hal

    2014-01-01

    The highest rated WordPress development and design book on the market is back with an all new third edition. Professional WordPress is the only WordPress book targeted to developers, with advanced content that exploits the full functionality of the most popular CMS in the world. Fully updated to align with WordPress 4.1, this edition has updated examples with all new screenshots, and full exploration of additional tasks made possible by the latest tools and features. You will gain insight into real projects that currently use WordPress as an application framework, as well as the basic usage a

  6. La mélodie secrète et l'homme créa l'univers

    Trinh, Xuan Thuan

    1991-01-01

    L'Univers nous sera-t-il un jour révélé dans la totalité de sa réalité? Parviendrons-nous à percer le secret de sa vraie mélodie? Comment l'infiniment petit a-t-il accouché de l'infiniment grand et comment l'univers tout entier, avec ses centaines de milliards de galaxies, a-t-il jailli d'un "vide microscopique"? Comment, grâce à l'alchimie créatrice des étoiles et à l'existence des planètes, la vie et la conscience ont-elles surgi? Telles sont quelques-unes des questions que ce livre aborde. Il s'adresse à 1"`honnête homme'; curieux du monde qui l'entoure et intéressé par les progrès récents dans l'étude du Cosmos, sans être pour autant équipé du bagage scientifique du spécialiste. En retraçant l'évolution, à travers les âges, de la vision de l'Univers que s'est faite l'homme, il accorde une attention particulière à l'univers actuel, celui du big bang. Mais il sait dépasser l'argument proprement scientifique pour aborder les questions qui se posent inévitablement dans tou...

  7. The Dictionary Unit for South African English. South African Concise Oxford Dictionary

    Rajend Mesthrie

    2011-10-01

    Full Text Available The South African Concise Oxford Dictionary (henceforth SACOD is a South Af-rican version of the Concise Oxford Dictionary, the first time that this particular hybrid has been prepared. It is testimony to the enduring success of the work of the Dictionary Unit for South African English at Rhodes University, headed by teams that included Jean and William Branford in the 1970s, Penny Silva in the 1990s and now, Kathryn Kavanagh. The lexicographical work from the unit saw the publication of four editions of the Dictionary of Southern African English (1978, 1980, 1987, 1991, a South African Pocket Oxford Dictionary (SAPOD and the Dictionary of South African English on Historical Principles (DOSAEHP (1995. SACOD differs from the rest in several ways. It is larger in scope than SAPOD, smaller than DOSAEHP, and unlike DOSAE and DOSAEHP, does not deal with South African words alone. Based on the 10th edition of the Concise Oxford Dictionary SACOD has excised some words from the parent, whilst adding many new words of general English as well as of South Africa.

  8. Grammar Coding in the "Oxford Advanced Learner's Dictionary of Current English."

    Wekker, Herman

    1992-01-01

    Focuses on the revised system of grammar coding for verbs in the fourth edition of the "Oxford Advanced Learner's Dictionary of Current English" (OALD4), comparing it with two other similar dictionaries. It is shown that the OALD4 is found to be more favorable on many criteria than the other comparable dictionaries. (16 references) (VWL)

  9. Factors Affecting Applications to Oxford and Cambridge--Repeat Survey. Executive Summary with Statistics

    Ridley, Kate; White, Kerensa; Styles, Ben; Morrison, Jo

    2005-01-01

    This research follows up a study conducted in 1998 by the National Foundation for Educational Research (NFER) to investigate teachers' and students' views on the factors affecting students' choices of whether or not to apply to Oxford and Cambridge universities. It identifies what has changed since 1998 and areas in which the universities could…

  10. Repeatability of the Oxford Foot Model for Kinematic Gait Analysis of the Foot and Ankle

    van Hoeve, S.; Vos, J.; Weijers, P.; Verbruggen, J.; Willems, P.; Poeze, M.; Meijer, K.

    2015-01-01

    INTRODUCTION: Kinematic gait analysis via the multi-segmental Oxford foot model (OFM) may be a valuable addition to the biomechanical examination of the foot and ankle. The aim of this study is to assess the repeatability of the OFM in healthy subjects. METHODS: Nine healthy subjects, without a

  11. Software for relativistic atomic structure theory: The grasp project at oxford

    Parpia, F.A.; Grant, I.P.

    1991-01-01

    GRASP is an acronym for General-purpose Relativistic Atomic Structure Program. The objective of the GRASP project at Oxford is to produce user-friendly state-of-the-art multiconfiguration Dirac-Fock (MCDF) software packages for rleativistic atomic structure theory

  12. Repeatability of the Oxford Foot Model in children with foot deformity

    McCahill, Jennifer; Stebbins, Julie; Koning, Bart; Harlaar, Jaap; Theologis, Tim

    Introduction The Oxford Foot Model (OFM) is a multi-segment, kinematic model developed to assess foot motion. It has previously been assessed for repeatability in healthy populations. To determine the OFM's reliability for detecting foot deformity, it is important to know repeatability in

  13. Translation and cultural adaptation of the Manchester-Oxford Foot Questionnaire (MOXFQ) into Persian language.

    Mousavian, Alireza; Ebrahimzadeh, Mohammad H; Birjandinejad, Ali; Omidi-Kashani, Farzad; Kachooei, Amir Reza

    2015-12-01

    In this study, we aimed to translate and test the validity and reliablity of the Persian version of the Manchester-Oxford Foot Questionnaire in foot and ankle patients. We translated the Manchester-Oxford Foot Questionnaire to Persian language according to the accepted guidelines, then assessed the psychometric properties including the validity and reliability on 308 patients with long-standing foot and ankle problems. To test the reliability, we calculated the intra-class correlation coefficient (ICC) for test-retest reliability and measured Cronbach's alpha to test the internal consistency. To test the construct validity of the Manchester-Oxford Foot Questionnaire we also administered the Short-Form 36 to patients. Construct validity was supported by significant correlation with SF36 subscales except for pain subscale of the persian MOXFQ with mental health of the SF36 (r=0.207). Intraclass correlation coefficient was 0.79 for the total MOXFQ and ranged from 0.83 to 0.89 for the three subscales. Cronbach's alpha for pain, walking/standing, and social interaction was 0.86, 0.88, and 0.89, respectively, and was 0.79 for the total MOXFQ showing good internal consistency in each domain. The Persian Manchester-Oxford Foot Questionnaire health scoring system is a valid and reliable patient-reported instrument for foot and ankle problems. Copyright © 2015. Published by Elsevier Ltd.

  14. Developing a Structured Teaching Plan for Psychiatry Tutors at Oxford University

    Al-Taiar, Hasanen

    2014-01-01

    Purpose: The purpose of this thesis was to examine the teaching ways I undertook in teaching medical students and to examine the use of a structured teaching plan for the academic and clinical tutors in psychiatry. The teaching plan was developed for use, initially by Oxford University Academic tutors at the Department of Psychiatry. In addition,…

  15. The Why, What, and Impact of GPA at Oxford Brookes University

    Andrews, Matthew

    2016-01-01

    This paper examines the introduction at Oxford Brookes University of a Grade Point Average (GPA) scheme alongside the traditional honours degree classification. It considers the reasons for the introduction of GPA, the way in which the scheme was implemented, and offers an insight into the impact of GPA at Brookes. Finally, the paper considers…

  16. L'état de plasma le feu de l'Univers

    Lehner, Thierry

    2004-01-01

    Dans l'Antiquité, les Grecs considéraient que les constituants du monde dérivaient de quatre éléments essentiels : la terre, l'eau, l'air et le feu. Il n'est pas difficile de voir dans les trois premiers l'équivalent de nos états solide, liquide et gazeux. Mais l'état physique le plus répandu dans l'Univers - correspondant au feu des Anciens - n'est apparu que récemment et n'a été reconnu par la communauté des physiciens qu'en 1928 : c'est le plasma. Cet état très étrange - gazeux, électrique, lumineux, impalpable - reste le plus exotique et le plus inattendu. Il a donné naissance aux trois autres états puisque, à l'exception des éléments ultra-légers que sont l'hydrogène et l'hélium, tous ceux qui constituent notre monde (carbone, oxygène, fer, etc.) sont apparus dans ces fourneaux gigantesques, ces monstres de plasma, qu'étaient les premières étoiles. La vie elle-même en découle par ricochet, ce qui a permis de dire que nous ne sommes que des " poussières d'étoiles ". Décou...

  17. RELATIONSHIP BETWEEN COMPACTING PRESSURE AND CONDITIONS IN PRESSING CHAMBER DURING BIOMASS PRESSING

    Peter Križan

    2016-02-01

    Full Text Available In this paper, we will present the impact of the conditions in pressing chambers during the pressing of wooden briquettes. The conditions in pressing chambers can significantly impact the resulting compacting pressure required for the pressing of briquettes. In the introduction, we show which parameters of the pressing chamber during pressing can impact the resulting compacting pressure. The experiment results which are shown in this paper described the detected impact of some important pressing chamber parameters. This experiment aims to detect the pressing chamber length impact and the impact of the way of pressing. By setting the pressing conditions, we will be able to achieve the suitable resulting compacting pressure with respect to the required final briquettes quality.

  18. Towards a more responsible press

    Taimur ul Hassan

    2012-12-01

    Full Text Available The article analyses Pakistan’s newspapers’ performance with regard to civil society in2003 by using content analysis approach. There is no gainsaying that a strong civil society guaranteesa strong democracy. In Pakistan, spells of military rule have stunted the growth of democracy,adversely affecting civil society. Media too has suffered as a result. Normative theories of media callfor laying down norms and conventions for media. In democracy, all sections of society should berepresented in media. In Pakistan’s case, due to military regimes and quasi democratic governments,combined with the demands of market economy, the media have largely not been able to fulfill thisresponsibility towards society. Social Responsibility demands that the media must fulfill itsresponsibility towards society, while giving a free space to all voices of society. In Pakistan, whethernewspapers played that role in 2003 when civil society had accelerated its campaign to end honorkillings and crimes against women is investigated. The findings show that newspapers did supportcivil society, showing a gradual movement towards a more responsible press.

  19. Press Advertising – Varieties and Sub-Varieties. Methods of Promoting the Press

    Mikosz, Joanna

    2016-01-01

    In the text entitled “Press advertising – varieties and sub-varieties. Methods of promoting the press”, the author discusses press advertising, which is a fast developing mass-media phenomenon. Modernity has granted press advertising a high quality of print and paper, as well as Infinite possibilities of combining various promotional forms with the press. The author argues that press advertising is one of the best ways in which a company can communicate with the market. Its advantage is, abov...

  20. Smashing WordPress Beyond the Blog

    Hedengren, Thord Daniel

    2011-01-01

    Smashing WordPress shows you how to utilize the power of the WordPress platform, and provides a creative spark to help you build WordPress-powered sites that go beyond the obvious. The second edition of Smashing WordPress has been updated for WordPress 3.1+, which includes internal, custom post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to build just about anything in WordPress, resulting in fast deployments and greater design flexib

  1. PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION

    Georgia Kate Chapman

    2015-01-01

    This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protecti...

  2. Theology amongst the sciences: A personal view from the University of Oxford

    Susan E. Gillingham

    2011-03-01

    Full Text Available The paper focuses on two individuals who have each made a seminal contribution to the debates between theology and the sciences in Oxford - Charles Darwin (in the mid�19th century, and Richard Dawkins (from the 1990s to the present day. It introduces Darwin by way of a more personal and visual view from Worcester College Chapel. The restoration of the chapel took place at about the same time as the debates between Huxley and Wilberforce in the Oxford University Museum over Charles Darwin�s On the Origin of the Species. The first part of the paper then traces these debates back: first to an earlier period of disputation represented by Galileo Galilei (c. 1564�1642, and then to a period of greater accommodation represented by Isaac Newton (1643�1727. Darwin represents a third, more controversial, stage. The paper then looks at a fourth period, from the mid�20th century onwards, which is marked by more eirenical attempts to demarcate science and theology by seeing the former again as asking the �how� questions and the latter, the �why� questions. It then focuses on a fifth, more disputatious stage, which was initiated by Richard Dawkins, professor in the Public Understanding of Science until 2008. Professor Dawkins challenges the idea that theology cannot be studied, because its focus is a non-existent object, �God�.The second part of the paper looks at various Oxford projects and Oxford theologians who have risen to this contemporary challenge. They include the work of the Ian Ramsey Centre; Justin Barret�s and John Trigg�s joint � 2 million project, supported by the John Templeton foundation, which examines scientific ideas about religion and the mind; Richard Harries, Bishop of Oxford from 1987 to 2006, who has conducted a number of media interviews with Richard Dawkins; Keith Ward, who has written several books engaging not only with Dawkins but is also the Cambridge Professor of Mathematics, Stephen Hawking; and

  3. Aerosol trace metals, particle morphology and total gaseous mercury in the atmosphere of Oxford, UK

    Witt, M. L. I.; Meheran, N.; Mather, T. A.; de Hoog, J. C. M.; Pyle, D. M.

    2010-04-01

    An investigation of atmospheric trace metals was conducted in Oxford, UK, a small city ˜60 miles northwest of London, in 2007 and 2008. Concentrations of Sr, Mo, Cd, Pb, V, Cr, Mn, Fe, Co, Ni, Cu and Zn in aerosol were measured in bulk and size segregated samples. In addition, total gaseous mercury (TGM) concentrations were monitored semi-continuously by cold vapour-atomic fluorescence spectroscopy. Metal concentrations in Oxford were intermediate between previously reported levels of UK rural and urban areas for most metals studied and levels of Cd, Ni and Pb were within European guidelines. Metal concentrations appeared to be influenced by higher traffic volume on a timescale of hours. The influence of traffic on the aerosols was also suggested by the observation of carbonaceous particles via scanning electron microscopy (SEM). Air mass back trajectories suggest air masses arriving in Oxford from London and mainland Europe contained the highest metal concentrations. Aerosol samples collected over Bonfire Weekend, a period of intense firework use and lighting of bonfires in the UK, showed metal concentrations 6-46 times higher than at other times. Strontium, a tracer of firework release, was present at higher concentrations and showed a change in its size distribution from the coarse to fine mode over Bonfire Weekend. The presence of an abundance of spherical Sr particles was also confirmed in SEM images. The average TGM concentration in Oxford was 3.17 ng m -3 (st. dev. 1.59) with values recorded between 1.32 and 23.2 ng m -3. This is a higher average value than reported from nearby rural locations, although during periods when air was arriving from the west, similar concentrations to these rural areas were seen in Oxford. Comparison to meteorological data suggests that TGM in Oxford's air is highest when wind is arriving from the east/southeast. This may be due to emissions from London/mainland Europe with a possible contribution from emissions from a local

  4. Microplasticity in hot-pressed beryllium

    Plane, D.C.; Bonfield, W.

    1977-01-01

    Closed hysteresis loops measured in the microstrain region of hot pressed, commercially pure, polycrystalline beryllium are correlated with a dislocation - impurity atom, energy dissipating mechanism. (author)

  5. WordPress 3.7 complete

    Król, Karol

    2013-01-01

    WordPress 3.5 Complete: Third Edition is a comprehensive and step-by-step tutorial packed with screenshots and examples to make it easy and quick to pick it up.This WordPress book is a guide to WordPress for online publishers and web developers. If you are new to blogging and want to create your own blog or website from scratch, then ""WordPress 3.5 Complete: Third Edition"" is for you. No prior knowledge of HTML/CSS or PHP is required.

  6. Activation of Selected Core Muscles during Pressing

    Thomas W. Nesser

    2015-10-01

    Full Text Available Introduction: Unstable surface training is often used to activate core musculature during resistance training. Unfortunately, unstable surface training is risky and leads to detraining. Purpose: The purpose of this study was to determine core muscle activation during stable surface ground-based lifts. Methods: Fourteen recreational trained and former NCAA DI athletes (weight 84.2 ± 13.3 kg; height 176.0 ± 9.5 cm; age 20.9 ± 2.0 years volunteered for participation. Subjects completed two ground-based lifts: overhead press and push-press. Surface EMG was recorded from 4 muscles on the right side of the body (Rectus Abdominus (RA, External Oblique (EO, Transverse Abdominus (TA, and Erector Spinae (ES. Results: Paired sample T-tests identified significant muscle activation differences between the overhead press and the push-press included ES and EO. Average and peak EMG for ES was significantly greater in push-press (P<0.01. Anterior displacement of COP was significantly greater in push-press compared to overhead press during the eccentric phase. Conclusion: The push-press was identified as superior in core muscle activation when compared to the overhead pressing exercise. Keywords: torso, stability, weight lifting, resistance training

  7. Radiocarbon facility at the Research Laboratory for Archaeology in Oxford - a review

    White, N.R.; Hedges, R.E.M.; Wand, J.O.; Hall, E.T.

    1981-01-01

    The Oxford accelerator mass spectrometry facility is primarily intended for radiocarbon work. It has been designed and built within the department, except for the 3 MV tandem, which is being purchased from General Ionex and is still awaited. This system has been described many times before, so this paper will not give a comprehensive description of the facility, but only cover in detail areas of recent progress, or areas where our approach differs from other labs

  8. Cross-cultural adaptation and validation of the Turkish version of Oxford hip score.

    Tuğay, Baki Umut; Tuğay, Nazan; Güney, Hande; Hazar, Zeynep; Yüksel, İnci; Atilla, Bülent

    2015-06-01

    The purpose of this study was to translate the Oxford hip score (OHS) into Turkish and to evaluate the psychometric properties by testing the internal consistency, reproducibility, construct validity, and responsiveness in patients with hip osteoarthritis (OA). Oxford hip score was translated and culturally adapted according to the guidelines in the literature. Seventy patients (mean age 61.45 ± 9.29 years) with hip osteoarthritis participated in the study. Patients completed the Turkish Oxford hip score (OHS-TR), the Short-Form 36 (SF-36), and Western Ontario and McMaster Universities Index (WOMAC). Internal consistency was tested using Cronbach's α coefficient. Patients completed OHS-TR questionnaire twice in 7 days for determining the reproducibility. Correlation between the total results of both tests was determined by the Pearson correlation coefficient and intraclass correlation coefficient (ICC). Validity was assessed by calculating the Pearson correlation coefficient between the OHS-TR and WOMAC and SF-36 scores. Floor and ceiling effects were analyzed. The internal consistency was high (Cronbach's α 0.93). The construct validity showed a significant correlation between the OHS-TR and WOMAC and related SF-36 domains (p < 0.001). The ICC's ranged between 0.80 and 0.99. There was no floor or ceiling effect in total OHS-TR score. The OHS-TR questionnaire is valid, reliable, and responsive for the Turkish-speaking patients with hip OA.

  9. Rubidium-strontium ages from the Oxford Lake-Knee Lake greenstone belt, northern Manitoba

    Clark, G.S.; Cheung, S.-P.

    1980-01-01

    Rb-Sr whole-rock ages have been determined for rocks from the Oxford Lake-Knee Lake-Gods Lake geenstone belt in the Superior Province of northeastern Manitoba. The age of the Magill Lake Pluton is 2455 +- 35 Ma(lambda 87 Rb = 1.42 x 10 -11 yr -1 ), with an initial 87 Sr/ 86 Sr ratio of 0.7078 +- 0.0043. This granite stock intrudes the Oxford Lake Group, so it is post-tectonic and probably related to the second, weaker stage of metamorphism. The age of the Bayly Lake Pluton is 2424 +- 74 Ma, with an initial 87 Sr/ 86 Sr ratio of 0.7029 +- 0.0001. This granodioritic batholith complex does not intrude the Oxford Lake Group. It is syn-tectonic and metamorphosed. The age of volcanic rocks of the Hayes River Group, from Goose Lake (30 km south of Gods Lake Narrows), is 2680 +- 125 Ma, with an initial 87 Sr/ 86 Sr ratio of 0.7014 +- 0.0009. The age for the Magill Lake and Bayly Lake Plutons can be interpreted as the minimum ages of granite intrusion in the area. The age for the Hayes River Group volcanic rocks is consistent with Rb-Sr ages of volcanic rocks from other Archean greenstone belts within the northwestern Superior Province. (auth)

  10. Normalized knee-extension strength or leg-press power after fast-track total knee arthroplasty

    Aalund, Peter K; Larsen, Kristian; Hansen, Torben Bæk

    2013-01-01

    OBJECTIVE: (s): To investigate which of the two muscle-impairment measures for the operated leg, normalized knee extension strength or leg press power, is more closely associated to performance-based and self-reported measures of function shortly following total knee arthroplasty (TKA). DESIGN...... and dynamic leg presses to determine their body-mass normalized knee extension strength and leg press power, respectively. The 10-m fast speed walking and 30-s chair stand tests were used to determine performance-based function, while the Western Ontario McMaster University Osteoarthritis Index (WOMAC......) and Oxford Knee scores were used to determine self-reported function. RESULTS: Normalized leg press power was more closely associated to both performance-based (r=.82, P...

  11. Teenagers as Victims in the Press

    Andersson, Gunvor; Lundstrom, Tommy

    2007-01-01

    Research into press reporting on young people has tended to concentrate on young people as offenders. In contrast, this article focuses on press coverage of teenagers as victims. Reports in two Swedish newspapers (a morning broadsheet and an evening tabloid) were studied over a period of four months and subjected to a qualitative analysis of…

  12. Communicators take nine Virginia Press Women awards

    Owczarski, Mark

    2008-01-01

    Three Virginia Tech communicators have won Virginia Press Women awards. The winners - Susan Trulove, research division communications manager; Clara Cox, university publications director; and Heather Riley Chadwick, College of Architecture and Urban Studies communication manager - were announced at the Virginia Press Women Annual Spring Conference in Staunton, Va.

  13. 1979: The Campus Student Press in America.

    Ingelhart, Louis E.

    1979-01-01

    Discusses a number of topics involving the campus press, including the independence of campus publications, censorship issues, the relationship between the student press and the college administrator, the financing of student newspapers, yearbook production and financing, probable future student publications trends, and the need for appropriate…

  14. Network Dynamics: Modeling And Generation Of Very Large Heterogeneous Social Networks

    2015-11-23

    P11035 (2014). [19] P. L. Krapivsky and S. Redner, Phys. Rev. E. 71, 036118 (2005). [20] M. O. Jackson and B. W. Rogers, Amer. Econ . Rev. 97, 890...P06004 (2010). [24] M. E. J. Newman, Networks: An Introduction (Oxford Univ. Press, Oxford, 2010). [25] P. J. Flory, Principles of Polymer Chemistry

  15. Du Burger-King au pavillon. L’illégitimité des univers paradisiaques de l’individu contemporain.

    Marc Dumont

    2007-10-01

    Full Text Available Une fois n’est pas coutume, ce sont cette fois deux types de blogs qui ont retenu l’attention du site du mois : le premier sur l’ univers de la culture fast-food , les seconds constituant une série sur les autoconstructeurs ( Didier et son chantier , puis Autoconstructeur dans la Drôme ainsi qu’ autoconstruction à St Prix — bien d’autres auraient pu être cités, mais le visiteur peut aisément glisser de liens en liens à partir de ces sites. Pavillons, MacDo et blog : ...

  16. SURFS: Riding the waves with Synthetic UniveRses For Surveys

    Elahi, Pascal J.; Welker, Charlotte; Power, Chris; Lagos, Claudia del P.; Robotham, Aaron S. G.; Cañas, Rodrigo; Poulton, Rhys

    2018-04-01

    We present the Synthetic UniveRses For Surveys (SURFS) simulations, a set of N-body/Hydro simulations of the concordance Λ Cold Dark Matter (ΛCDM) cosmology. These simulations use Planck cosmology, contain up to 10 billion particles, and sample scales and halo masses down to 1 kpc and 108 M⊙. We identify and track haloes from z = 24 to today using a state-of-the-art 6D halo finder and merger tree builder. We demonstrate that certain properties of haloes merger trees are numerically converged for haloes composed of ≳100 particles. Haloes smoothly grow in mass, Vmax, with the mass history characterized by log M(a) ∝ exp [-(a/β)α], where a is the scale factor, α(M) ≈ 0.8 & β(M) ≈ 0.024, with these parameters decreasing with decreasing halo mass. Subhaloes follow power-law cumulative mass and velocity functions, i.e. n( > f) ∝ f-α with αM = 0.83 ± 0.01 and α _{V_max}=2.13± 0.03 for mass and velocity, respectively, independent of redshift, as seen in previous studies. The halo-to-halo scatter in amplitude is 0.9 dex. The number of subhaloes in a halo weakly correlates with a halo's concentration c and spin λ:haloes of high c and low λ have 60 per cent more subhaloes than similar mass haloes of low c and high λ. High cadence tracking shows subhaloes are dynamic residents, with 25 per cent leaving their host halo momentarily, becoming a backsplash subhalo, and another 20 per cent changing hosts entirely, in agreement with previous studies. In general, subhaloes have elliptical orbits, e ≈ 0.6, with periods of 2.3^{+2.1}_{-1.7} Gyrs. Subhaloes lose most of their mass at pericentric passage with mass loss rates of ˜ 40 per cent Gyr-1. These catalogues will be made publicly available.

  17. Freva - Freie Univ Evaluation System Framework for Scientific HPC Infrastructures in Earth System Modeling

    Kadow, C.; Illing, S.; Schartner, T.; Grieger, J.; Kirchner, I.; Rust, H.; Cubasch, U.; Ulbrich, U.

    2017-12-01

    The Freie Univ Evaluation System Framework (Freva - freva.met.fu-berlin.de) is a software infrastructure for standardized data and tool solutions in Earth system science (e.g. www-miklip.dkrz.de, cmip-eval.dkrz.de). Freva runs on high performance computers to handle customizable evaluation systems of research projects, institutes or universities. It combines different software technologies into one common hybrid infrastructure, including all features present in the shell and web environment. The database interface satisfies the international standards provided by the Earth System Grid Federation (ESGF). Freva indexes different data projects into one common search environment by storing the meta data information of the self-describing model, reanalysis and observational data sets in a database. This implemented meta data system with its advanced but easy-to-handle search tool supports users, developers and their plugins to retrieve the required information. A generic application programming interface (API) allows scientific developers to connect their analysis tools with the evaluation system independently of the programming language used. Users of the evaluation techniques benefit from the common interface of the evaluation system without any need to understand the different scripting languages. The integrated web-shell (shellinabox) adds a degree of freedom in the choice of the working environment and can be used as a gate to the research projects HPC. Plugins are able to integrate their e.g. post-processed results into the database of the user. This allows e.g. post-processing plugins to feed statistical analysis plugins, which fosters an active exchange between plugin developers of a research project. Additionally, the history and configuration sub-system stores every analysis performed with the evaluation system in a database. Configurations and results of the tools can be shared among scientists via shell or web system. Furthermore, if configurations match

  18. Freva - Freie Univ Evaluation System Framework for Scientific Infrastructures in Earth System Modeling

    Kadow, Christopher; Illing, Sebastian; Kunst, Oliver; Schartner, Thomas; Kirchner, Ingo; Rust, Henning W.; Cubasch, Ulrich; Ulbrich, Uwe

    2016-04-01

    The Freie Univ Evaluation System Framework (Freva - freva.met.fu-berlin.de) is a software infrastructure for standardized data and tool solutions in Earth system science. Freva runs on high performance computers to handle customizable evaluation systems of research projects, institutes or universities. It combines different software technologies into one common hybrid infrastructure, including all features present in the shell and web environment. The database interface satisfies the international standards provided by the Earth System Grid Federation (ESGF). Freva indexes different data projects into one common search environment by storing the meta data information of the self-describing model, reanalysis and observational data sets in a database. This implemented meta data system with its advanced but easy-to-handle search tool supports users, developers and their plugins to retrieve the required information. A generic application programming interface (API) allows scientific developers to connect their analysis tools with the evaluation system independently of the programming language used. Users of the evaluation techniques benefit from the common interface of the evaluation system without any need to understand the different scripting languages. Facilitation of the provision and usage of tools and climate data automatically increases the number of scientists working with the data sets and identifying discrepancies. The integrated web-shell (shellinabox) adds a degree of freedom in the choice of the working environment and can be used as a gate to the research projects HPC. Plugins are able to integrate their e.g. post-processed results into the database of the user. This allows e.g. post-processing plugins to feed statistical analysis plugins, which fosters an active exchange between plugin developers of a research project. Additionally, the history and configuration sub-system stores every analysis performed with the evaluation system in a database

  19. WordPress web design for dummies

    Sabin-Wilson, Lisa

    2013-01-01

    Updated, full-color guide to creating dynamic websites with WordPress 3.6 In this updated new edition, bestselling For Dummies author and WordPress expert Lisa Sabin-Wilson makes it easy for anyone with a basic knowledge of the WordPress software to create a custom site using complementary technologies such as CSS, HTML, PHP, and MySQL. You'll not only get up to speed on essential tools and technologies and further advance your own design skills, this book also gives you pages of great case studies, so you can see just how other companies and individuals are creating compelling, customized, a

  20. Teach yourself visually complete WordPress

    Majure, Janet

    2013-01-01

    Take your WordPress skills to the next level with these tips, tricks, and tasks Congratulations on getting your blog up and running with WordPress! Now are you ready to take it to the next level? Teach Yourself VISUALLY Complete WordPress takes you beyond the blogging basics with expanded tips, tricks, and techniques with clear, step-by-step instructions accompanied by screen shots. This visual book shows you how to incorporate forums, use RSS, obtain and review analytics, work with tools like Google AdSense, and much more.Shows you how to use mobile tools to edit a

  1. WordPress 24-Hour Trainer

    Plumley, George

    2011-01-01

    The eagerly anticipated second edition, completely updated for WordPress 3.1 As an open source content management system, WordPress allows users to easily build feature-rich web sites with no programming experience. This unique book-and-video package is a friendly, self-paced beginners guide to the latest release of WordPress. Lessons are focused on practical, everyday tasks that users will need to create and maintain their sites: entering new content, creating new pages, managing menus, making content search-engine friendly. Plus you'll find lots of tips based on years of experience teaching

  2. WordPress web application development

    Ratnayake, Rakhitha Nimesh

    2013-01-01

    An extensive, practical guide that explains how to adapt WordPress features, both conventional and trending, for web applications.This book is intended for WordPress developers and designers who have the desire to go beyond conventional website development to develop quality web applications within a limited time frame and for maximum profit. Experienced web developers who are looking for a framework for rapid application development will also find this to be a useful resource. Prior knowledge with of WordPress is preferable as the main focus will be on explaining methods for adapting WordPres

  3. Professional WordPress Plugin Development

    Williams, Brad; Tadlock, Justin

    2011-01-01

    Taking WordPress to the next level with advanced plugin developmentWordPress is used to create self-hosted blogs and sites, and it's fast becoming the most popular content management system (CMS) on the Web. Now you can extend it for personal, corporate and enterprise use with advanced plugins and this professional development guide. Learn how to create plugins using the WordPress plugin API: utilize hooks, store custom settings, craft translation files, secure your plugins, set custom user roles, integrate widgets, work with JavaScript and AJAX, create custom post types. You'll find a practic

  4. Development of the Oxford Participation and Activities Questionnaire: constructing an item pool

    Kelly L

    2015-05-01

    Full Text Available Laura Kelly, Crispin Jenkinson, Sarah Dummett, Jill Dawson, Ray Fitzpatrick, David Morley Health Services Research Unit, Nuffield Department of Population Health, University of Oxford, Oxford, UK Purpose: The Oxford Participation and Activities Questionnaire is a patient-reported outcome measure in development that is grounded on the World Health Organization International Classification of Functioning, Disability, and Health (ICF. The study reported here aimed to inform and generate an item pool for the new measure, which is specifically designed for the assessment of participation and activity in patients experiencing a range of health conditions. Methods: Items were informed through in-depth interviews conducted with 37 participants spanning a range of conditions. Interviews aimed to identify how their condition impacted their ability to participate in meaningful activities. Conditions included arthritis, cancer, chronic back pain, diabetes, motor neuron disease, multiple sclerosis, Parkinson's disease, and spinal cord injury. Transcripts were analyzed using the framework method. Statements relating to ICF themes were recast as questionnaire items and shown for review to an expert panel. Cognitive debrief interviews (n=13 were used to assess items for face and content validity. Results: ICF themes relevant to activities and participation in everyday life were explored, and a total of 222 items formed the initial item pool. This item pool was refined by the research team and 28 generic items were mapped onto all nine chapters of the ICF construct, detailing activity and participation. Cognitive interviewing confirmed the questionnaire instructions, items, and response options were acceptable to participants. Conclusion: Using a clear conceptual basis to inform item generation, 28 items have been identified as suitable to undergo further psychometric testing. A large-scale postal survey will follow in order to refine the instrument further and

  5. Oxford and Cambridge Boat Race: Performance, Pacing and Tactics Between 1890 and 2014.

    Edwards, Andrew M; Guy, Joshua H; Hettinga, Florentina J

    2016-10-01

    Currently no studies have examined the historical performances of Oxford and Cambridge Boat Race crews in the context of performance, pacing and tactics which is surprising as the event has routinely taken place annually for over 150 years on the same course. The purpose of this study was twofold, to firstly examine the historical development of performances and physical characteristics of crews over 124 years of the Oxford and Cambridge Boat Race between 1890 and 2014 and secondly to investigate the pacing and tactics employed by crews over that period. Linear regression modelling was applied to investigate the development of performance and body size for crews of eight male individuals over time from Boat Race archive data. Performance change over time was further assessed in 10-year clusters while four intra-race checkpoints were used to examine pacing and tactics. Significant correlations were observed between performance and time (1890-2014) for both Oxford (r = -0.67; p tactical advantage from commencing on either the Surrey or Middlesex station beyond chance alone; however, all crews (n = 228) adopted a fast-start strategy, with 81 % of victories achieved by the crew leading the race at the first intra-race checkpoint (24 % of total distance). Crews leading the race at the final checkpoint (83 % of total distance; 1143 m) achieved victory on 94 % of occasions. Performances and physical characteristics of the crews have changed markedly since 1890, with faster heavier crews now common. Tactically, gaining the early lead position with a fast-start strategy seems particularly meaningful to success in the Boat Race throughout the years, and has been of greater importance to race outcome than factors such as the starting station.

  6. Translation, cross-cultural adaptation and validation of the Danish version of the Oxford hip score

    Paulsen, A; Odgaard, Anders; Overgaard, S

    2012-01-01

    missing to calculate a sum score. Construct validity was adequate and 80% of our predefined hypotheses regarding the correlation between scores on the Danish OHS and the other questionnaires were confirmed. The intraclass correlation (ICC) of the different items ranged from 0.80 to 0.95 and the average......Objectives The Oxford hip score (OHS) is a 12-item questionnaire designed and developed to assess function and pain from the perspective of patients who are undergoing total hip replacement (THR). The OHS has been shown to be consistent, reliable, valid and sensitive to clinical change following...

  7. The Oxford SWIFT Spectrograph: first commissioning and on-sky results

    Thatte, Niranjan; Tecza, Mathias; Clarke, Fraser; Goodsall, Timothy; Fogarty, Lisa; Houghton, Ryan; Salter, Graeme; Scott, Nicholas; Davies, Roger L.; Bouchez, Antonin; Dekany, Richard

    2010-01-01

    The Oxford SWIFT spectrograph, an I & z band (6500-10500 A) integral field spectrograph, is designed to operate as a facility instrument at the 200 inch Hale Telescope on Palomar Mountain, in conjunction with the Palomar laser guide star adaptive optics system PALAO (and its upgrade to PALM3000). SWIFT provides spectra at R(≡λ/▵λ)~4000 of a contiguous two-dimensional field, 44 x 89 spatial pixels (spaxels) in size, at spatial scales of 0.235";, 0.16", and 0.08" per spaxel. It employs two 250μ...

  8. Study of Servo Press with a Flywheel

    Tso, Pei-Lum; Li, Cheng-Ho

    The servo press with a flywheel is able to provide flexible motions with energy-saving merit, but its true potential has not been thoroughly studied and verified. In this paper, such the “hybrid-driven” servo press is focused on, and the stamping capacity and the energy distribution between the flywheel and the servomotor are investigated. The capacity is derived based on the principle of energy conservation, and a method of using a capacity percentage plane for evaluation is proposed. A case study is included to illustrate and interpret that the stamping capacity is highly dependent on the programmed punch motions, thus the capacity prediction is always necessary while applying this kind of servo press. The energy distribution is validated by blanking experiments, and the results indicate that the servomotor needs only to provide 15% to the flywheel torque, 12% of the total stamping energy. This validates that the servomotor power is significantly saved in comparison with conventional servo presses.

  9. WordPress 3 For Business Bloggers

    Thewlis, Paul

    2011-01-01

    This is a practical, hands-on book based around a fictitious case study blog, which you will build on a development server using WordPress. The case study grows chapter by chapter, from installing your local development server, right up to the finished blog. This book is for anybody running or starting a business blog using WordPress, whether you plan to use your blog for PR and marketing, or want to profit directly from blogging.

  10. Denmark, Democracy and the Free Press

    Breiting, Søren

    2006-01-01

    What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world.......What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world....

  11. The Liberal Struggle for Press Freedom

    Mogensen, Kirsten

    In this paper, the public debate following the re-ligion-motivated assassination of Dutch filmmaker Theo van Gogh in November 2004 is examined. The paper aims at describ-ing religious as well as secular positions in the Danish debate about freedom of speech and press in relation to religious issues....... Historically, the concept of press freedom was linked to a fight for religious freedom in London, as described by Siebert....

  12. Univé customer survey: Pay-As-You-Drive (PAYD) insurance : Report PAYD-2. Feedback from Pay-As-You-Drive insurance, both outside and inside the car

    Lewis Evans, Ben; den Heijer, Anne; Dijksterhuis, Chris; de Waard, Dick; Brookhuis, Karel; Tucha, Oliver

    2013-01-01

    On the 10th of January 2013 over 3500 Univé clients were contacted and asked to fill in an online survey via Qualtrics, a survey website company licenced by the University of Groningen, about the future of car insurance at Univé. These customers could be classified under three main headings; car

  13. Deep Mapping and Screen Tourism: The Oxford of Harry Potter and Inspector Morse

    James Cateridge

    2015-08-01

    Full Text Available This article proposes that the experiences of screen tourists in Oxford help to create a theoretical “deep map” of the city which explores place through narrative. Building on the travel writing of William Least Heat-Moon and other recent work in the spatial humanities, two case studies of major screen tourism drivers are considered and analyzed. The British television drama Inspector Morse (1987–2000 explores the ambiguity of Oxford intellectualism through its central character. Morse’s love of high culture, especially music, provides suggestive additional layers for multimedia mapping, which are realized online through user-adapted Google Maps and geolocated images posted on the Flickr service. Harry Potter fans may not be “pure” or independent screen tourists, but they provide a wealth of data on their interactions with filming locations via social media such as Instagram. This data provides emotional as well as factual evidence, and is accumulating into an ever richer and deeper digital map of human experience.

  14. Accurate Typing of Human Leukocyte Antigen Class I Genes by Oxford Nanopore Sequencing.

    Liu, Chang; Xiao, Fangzhou; Hoisington-Lopez, Jessica; Lang, Kathrin; Quenzel, Philipp; Duffy, Brian; Mitra, Robi David

    2018-04-03

    Oxford Nanopore Technologies' MinION has expanded the current DNA sequencing toolkit by delivering long read lengths and extreme portability. The MinION has the potential to enable expedited point-of-care human leukocyte antigen (HLA) typing, an assay routinely used to assess the immunologic compatibility between organ donors and recipients, but the platform's high error rate makes it challenging to type alleles with accuracy. We developed and validated accurate typing of HLA by Oxford nanopore (Athlon), a bioinformatic pipeline that i) maps nanopore reads to a database of known HLA alleles, ii) identifies candidate alleles with the highest read coverage at different resolution levels that are represented as branching nodes and leaves of a tree structure, iii) generates consensus sequences by remapping the reads to the candidate alleles, and iv) calls the final diploid genotype by blasting consensus sequences against the reference database. Using two independent data sets generated on the R9.4 flow cell chemistry, Athlon achieved a 100% accuracy in class I HLA typing at the two-field resolution. Copyright © 2018 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

  15. Cemented versus Uncemented Oxford Unicompartmental Knee Arthroplasty: Is There a Difference?

    Burak Akan

    2013-01-01

    Full Text Available Purpose. The use of uncemented unicompartmental knee prostheses has recently increased. However, few studies on the outcomes of uncemented unicompartmental knee prostheses have been performed. The purpose of this study was to compare the outcomes of cemented and uncemented Oxford unicompartmental knee arthroplasty. Materials and Methods. This retrospective observational study evaluated the clinical and radiological outcomes of 263 medial Oxford unicompartmental prostheses (141 cemented, 122 uncemented implanted in 235 patients. The mean follow-up was 42 months in the cemented group and 30 months in the uncemented group. Results. At the last follow-up, there were no significant differences in the clinical results or survival rates between the two groups. However, the operation time in the uncemented unicompartmental knee arthroplasty group was shorter than that in the cemented unicompartmental knee arthroplasty group. In addition, the cost of uncemented arthroplasty was greater. Conclusion. Despite the successful midterm results in the uncemented unicompartmental knee arthroplasty group, a longer follow-up period is required to determine the best fixation mode.

  16. Parroquia católica en Oxford, Gran Bretaña

    Ahrends, Peter

    1974-03-01

    Full Text Available This strange new building was commissioned Í0 accommodate the expanding activities of the Newman Community which acts as a religious and social center for the Catholics of the University of Oxford. The following have been constructed: a chapel, a multiple-use room, entrance hall, bar, library, meeting room, eight bedrooms, small lounges and kitchen, etc. Part of the already existing building was used for the installation of another kitchen and several bathrooms. The best possible advantage has been taken of the lot which is narrow and irregularly shaped. Construction consists basically of brick walls, with columns, reinforced concrete stairs and castings.Este curioso y nuevo edificio se ha edificado para subsanar la creciente expansión de actividades de la Comunidad Newman, que actúa como centro religioso y social para los católicos de la Universidad de Oxford. Han sido construidos: una capilla, una sala de usos múltiples, entrada, bar, biblioteca, sala de reuniones, ocho dormitorios, pequeñas salitas y cocina, etc., aprovechando parte del edificio existente para ubicar otra cocina y varios cuartos de baño. El solar, que era estrecho y de forma irregular, se ha aprovechado al máximo. La construcción se ha llevado a cabo, fundamentalmente, a base de muros de fábrica de ladrillo, con pilares, forjados y escaleras de hormigón armado.

  17. Chip compacting press; Jido kirikuzu asshukuki

    Oura, K. [Yuken Kogyo Co. Ltd., Kanagawa (Japan)

    1998-08-15

    The chips exhausted from various machine tools are massy, occupy much space and make working environment worse by staying added cutting oil to lower part. The chips are exhausted as a result of machining and have not constant quality. Even if used material is same the chips have various shapes and properties by kinds and machining methods of used machine tools, and are troublesome materials from a standpoint of their treatment. Pressing and solidification of the chips have frequently been tried. A chip compacting press introduced in this paper, a relatively cheap chip compacting press aimed for relatively small scale chip treatment, and has such characteristics and effects as follows. Chips are pressed and solidified by each raw material, so fractional management can be easily conducted. As casting metal chips and curled chips of iron and aluminum can be pressed to about 1/3 to 1/5 and about 1/40, respectively, space saving can be conducted. Chip compacting pressing upgrades its transporting efficiency to make possible to reduce its transporting cost. As chip solidification controls its oxidation and most cutting oil are removed, chips are easy to recycle. 2 figs., 1 tab.

  18. “To Live in Hearts We Leave Behind is Not to Die.” Remembrance Sunday at Pusey House, Oxford University, A Review of Worship at Oxford University

    Peter L. Kraus

    2017-04-01

    Full Text Available In recent years, religious participation by students of all faiths at Universities in the United Kingdom has seen a steady increase in attendance. This brief essay is a case study of worship by members of the University Community at Pusey House at the University of Oxford, which reflects the trend. On a crisp fall, November day, the twenty-third Sunday after Trinity (8th of November 2015 I had the opportunity to attend services at Pusey House, Oxford on Remembrance Sunday while on sabbatical at The University of Oxford (St. Stephen’s House.

  19. Derivation of uranium residual radioactive material guidelines for the former Alba Craft Laboratory site, Oxford, Ohio

    Nimmagadda, M.; Faillace, E.; Yu, C.

    1994-01-01

    Residual radioactive material guidelines for uranium were derived for the former Alba Craft Laboratory site in Oxford, Ohio. This site has been identified for remedial action under the Formerly Utilized Sites Remedial Action Program (FUSRAP) of the US Department of Energy (DOE). Single nuclide and total uranium guidelines were derived on the basis of the requirement that the 50-year committed effective dose equivalent to a hypothetical individual who lives or works in the immediate vicinity of the former Alba Craft Laboratory site should not exceed a dose of 30 mrem/yr following remedial action for the current use and likely future use scenarios or a dose of 100 mrem/yr for less likely future use scenarios (Yu et al. 1993). The DOE residual radioactive material guideline computer code, RESRAD, which implements the methodology described in the DOE manual for implementing residual radioactive material guidelines, was used in this evaluation

  20. Assessment of practical and experimental work in physics through OCEA (Oxford Certificate of Educational Achievement)

    Josephy, Richard

    1986-07-01

    For some years there has been a growing recognition of the need for changes in assessment patterns in school science. These changes include a move towards criterion-based assessment linking to objectives and an increased emphasis on the assessment of practical and experimental skills. These changes are, to a significant extent, embodied in the new GCSE assessment schemes and will thus affect all students and teachers of physics from September (1986). At least 20% of the total assessment in GCSE physics examinations must be of practical and experimental skills, and at least half of this must be carried out in the laboratory environment. One development which addresses the needs and problems outlined above is the science component of OCEA, the Oxford Certificate of Educational Achievement. Because this covers a much wider field than assessment of practical and experimental skills in physics, a brief description of the whole project is given.

  1. The Oxford Probe: an open access five-hole probe for aerodynamic measurements

    Hall, B. F.; Povey, T.

    2017-03-01

    The Oxford Probe is an open access five-hole probe designed for experimental aerodynamic measurements. The open access probe can be manufactured by the end user via additive manufacturing (metal or plastic). The probe geometry, drawings, calibration maps, and software are available under a creative commons license. The purpose is to widen access to aerodynamic measurement techniques in education and research environments. There are many situations in which the open access probe will allow results of comparable accuracy to a well-calibrated commercial probe. We discuss the applications and limitations of the probe, and compare the calibration maps for 16 probes manufactured in different materials and at different scales, but with the same geometrical design.

  2. The Oxford Probe: an open access five-hole probe for aerodynamic measurements

    Hall, B F; Povey, T

    2017-01-01

    The Oxford Probe is an open access five-hole probe designed for experimental aerodynamic measurements. The open access probe can be manufactured by the end user via additive manufacturing (metal or plastic). The probe geometry, drawings, calibration maps, and software are available under a creative commons license. The purpose is to widen access to aerodynamic measurement techniques in education and research environments. There are many situations in which the open access probe will allow results of comparable accuracy to a well-calibrated commercial probe. We discuss the applications and limitations of the probe, and compare the calibration maps for 16 probes manufactured in different materials and at different scales, but with the same geometrical design. (paper)

  3. Violation of a local form of the Lieb-Oxford bound

    Vilhena, J. G.; Räsänen, E.; Lehtovaara, L.; Marques, M. A. L.

    2012-05-01

    In the framework of density-functional theory, several popular density functionals for exchange and correlation have been constructed to satisfy a local form of the Lieb-Oxford bound. In its original global expression, the bound represents a rigorous lower limit for the indirect Coulomb interaction energy. Here we employ exact-exchange calculations for the G2 test set to show that the local form of the bound is violated in an extensive range of both the dimensionless gradient and the average electron density. Hence, the results demonstrate the severity in the usage of the local form of the bound in functional development. On the other hand, our results suggest alternative ways to construct accurate density functionals for the exchange energy.

  4. Photographic monitoring of soiling and decay of roadside walls in central Oxford, England

    Thornbush, Mary J.; Viles, Heather A.

    2008-12-01

    As part of the Environmental Monitoring of Integrated Transport Strategies (EMITS) project, which examined the impact of the Oxford Transport Strategy (OTS) on the soiling and decay of buildings and structures in central Oxford, England, a simple photographic survey of a sample of roadside walls was carried out in 1997, with re-surveys in 1999 and 2003. Thirty photographs were taken each time, covering an area of stonework approximately 30 × 30 cm in dimensions at 1-1.3 m above pavement level. The resulting images have been used to investigate, both qualitatively as well as quantitatively, the progression of soiling and decay. Comparison of images by eye reveals a number of minor changes in soiling and decay patterns, but generally indicates stability except at one site where dramatic, superficial damage occurred over 2 years. Quantitative analysis of decay features (concavities resulting from surface blistering, flaking, and scaling), using simple techniques in Adobe Photoshop, shows variable pixel-based size proportions of concavities across 6 years of survey. Colour images (in Lab Color) generally have a reduced proportion of pixels, representing decay features in comparison to black and white (Grayscale) images. The study conveys that colour images provide more information both for general observations of soiling and decay patterns and for segmentation of decay-produced concavities. The study indicates that simple repeat photography can reveal useful information about changing patterns of both soiling and decay, although unavoidable variation in external lighting conditions between re-surveys is a factor limiting the accuracy of change detection.

  5. Polyethylene wear in Oxford unicompartmental knee replacement: a retrieval study of 47 bearings.

    Kendrick, B J L; Longino, D; Pandit, H; Svard, U; Gill, H S; Dodd, C A F; Murray, D W; Price, A J

    2010-03-01

    The Oxford Unicompartmental Knee replacement (UKR) was introduced as a design to reduce polyethylene wear. There has been one previous retrieval study involving this implant, which reported very low rates of wear in some specimens but abnormal patterns of wear in others. There has been no further investigation of these abnormal patterns. The bearings were retrieved from 47 patients who had received a medial Oxford UKR for anteromedial osteoarthritis of the knee. None had been studied previously. The mean time to revision was 8.4 years (sd 4.1), with 20 having been implanted for over ten years. The macroscopic pattern of polyethylene wear and the linear penetration were recorded for each bearing. The mean rate of linear penetration was 0.07 mm/year. The patterns of wear fell into three categories, each with a different rate of linear penetration; 1) no abnormal macroscopic wear and a normal articular surface, n = 16 (linear penetration rate = 0.01 mm/year); 2) abnormal macroscopic wear and normal articular surfaces with extra-articular impingement, n = 16 (linear penetration rate = 0.05 mm/year); 3) abnormal macroscopic wear and abnormal articular surfaces with intra-articular impingement +/- signs of non-congruous articulation, n = 15 (linear penetration rate = 0.12 mm/year). The differences in linear penetration rate were statistically significant (p < 0.001). These results show that very low rates of polyethylene wear are possible if the device functions normally. However, if the bearing displays suboptimal function (extra-articular, intra-articular impingement or incongruous articulation) the rates of wear increase significantly.

  6. Professor Daniel M Segal and studies of collision and `half-collision' complexes at Imperial College London and Oxford University

    Burnett, Keith

    2018-03-01

    We discuss Danny Segal's key roles in the development of the spectroscopy of collision complexes at Imperial College and Oxford. We explain how his work lead to a number of new insights into collision dynamics in external fields.

  7. PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION

    Georgia Kate Chapman

    2015-04-01

    Full Text Available This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protection from large media corporations and their political alignments. This report will assess the bias of reporting and news media publication that exists in Malaysia and Singapore due to legislative and regulatory constraints as opposed to bias that exist in the western liberal democratic nations of the United Kingdom (UK and the United States of America (USA due to Media Organisation control.

  8. CSR-communication in the Business Press

    Morsing, Mette; Langer, Roy

    on a broadly encompassing and ambiguous definition of CSR. Our empirical data shows how the business press in its discourse on CSR provides no clarity on the definition of CSR in terms of a coherent motive, a dominant stakeholder or a consistent issue, but rather maintains ambiguity and imprecision about......In this paper we analyze the construction of corporate social responsibility in the business press as an act of strategic ambiguity. While corporate social responsibility (CSR) generally evokes positive associations in public opinion, this paper demonstrates that these associations are based...... is systematically maintained in the business press. We refer to this process as strategic ambiguity. The paper discusses the potential value and limitations of framing CSR in a state of strategic ambiguity in the context of the concurrent rethinking of the role of business in modern welfare societies....

  9. Internet Marketing with WordPress

    Mercer, David

    2011-01-01

    The book's accompanying Interactive learning environment on siteprebuilder.com gives you an online place to enhance and extend your practical experience through exercises, consolidate your learning and theoretical knowledge with marked quizzes, interaction with your WordPress marketing community, and fun and exciting extras such as challenges and competitions. This book is for people already using WordPress, who want more visitors, better visitors, and to convert more of them into paying customers. No prior marketing experience is required, although a basic understanding of either hosted or se

  10. WordPress 24-hour trainer

    Plumley, George

    2015-01-01

    Create and expand feature-rich sites with no programming experience Ready to build, maintain, and expand your web site with WordPress but have no prior programming experience? WordPress 24-Hour Trainer, 3rd Edition is your book-and-video learning solution that walks you step-by-step through all the important features you will need to know. Lessons range from focused, practical everyday tasks to more advanced, creative features. Learn from an industry professional how to enter content, create pages, manage menus, utilize plug-ins, connect to social media, create membership and e-commerce site

  11. Atomes une exploration visuelle de tous les éléments connus dans l'univers

    Gray, Theodore

    2013-01-01

    Quelle est leur température critique ? Qu'est-ce que la masse atomique, la densité d'un matériau, l'ordre de remplissage des électrons ? Cet ouvrage invite avec pédagogie et humour à un passionnant voyage au pays des éléments, à partir de leur tableau périodique universel. Soutenue par une exploration visuelle qui montre l'élément à l'état pur mais aussi ses composés et ses applications les plus caractéristiques dans la vie quotidienne, cette approche pratique offre une combinaison parfaite de science chimique et de photographies, qui séduira les lecteurs les plus avertis comme tous les autres habitants sensibles de l'univers.

  12. AUPress: A Comparison of an Open Access University Press with Traditional Presses

    McGreal, Rory; Chen, Nian-Shing

    2011-01-01

    This study is a comparison of AUPress with three other traditional (non-open access) Canadian university presses. The analysis is based on the rankings that are correlated with book sales on Amazon.com and Amazon.ca. Statistical methods include the sampling of the sales ranking of randomly selected books from each press. The results of one-way…

  13. Bullying the media : Cultural and climato-economic readings of press repression versus press freedom

    Van de Vliert, E.

    Journalists and media assistants in many places are murdered, imprisoned, censored, threatened, and similarly harrassed. Here I document that, and explain why, there are three climato-economic niches of press repression versus press freedom as part of broader syndromes of national culture. A

  14. Change of Pressing Chamber Conicalness at Briquetting Process in Briquetting Machine Pressing Chamber

    Peter Križan

    2012-01-01

    Full Text Available In this paper, we will present the impact of the conical shape of a pressing chamber, an important structural parameter. Besides the known impact of the technological parameters of pressing chambers, it is also very important to pay attention to their structural parameters. In the introduction, we present a theoretical analysis of pressing chamber conicalness. An experiment aimed at detecting this impact was performed at our institute, and it showed that increasing the conicalness of a pressing chamber improves the quality of the final briquettes. The conicalness of the pressing chamber has a significanteffect on the final briquette quality and on the construction of briquetting machines. The experimental findings presented here show the importance of this parameter in the briquetting process.

  15. 28 CFR 540.64 - Press pools.

    2010-07-01

    ... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been...

  16. Law of the Student Press. Second Edition.

    Student Press Law Center, Washington, DC.

    Noting dramatic changes in First Amendment protections for high school students and new legal issues facing college newspaper editors, this book describes in detail the legal rights and responsibilities of both the high school and college press. While the book is extensively footnoted, it intentionally avoids "legal-ese" and "brings…

  17. Press kit kicks off new branding.

    Rees, Tom

    2004-01-01

    A smartly produced press kit resulted in unprecedented news coverage when Denver's Porter Adventist Hospital recently unveiled plans for an extensive 80 million dollars redevelopment. A news conference was held to announce this plan, along with the opening of the hospital's new emergency department. The overall effort is part of the new branding strategy of the 75-year-old hospital.

  18. The Moral Universes of Libertarian Press Theory.

    Wuliger, Gregory T.

    1991-01-01

    Uses Kantian logic to analyze the statement of Libertarian press theory "Truth beats falsehood in a free marketplace of ideas" as a definition, an observation, and a universal truth. Notes three corresponding moral universes, with differing ethical obligations. Discusses strengths and weaknesses of each. Cautions media ethics analysts…

  19. Investigation of pressing of molybdenum powder compacts

    Mymrin, S.A.; Kuznetsov, V.Eh.; Yampol'skij, M.L.; Leonov, S.A.; Mikhridinov, R.M.; Korzukhin, V.A.

    1990-01-01

    Results of an experimental investigation into pressing of compacts of MCh type molybdenum powders using the industrial equipment are presented. To measure the density of powder molybdenum billets a radioisotopic density meter with cesium-137 is used as radioactive gamma radiation source. The dependence of the produced billet density on the specific compacting pressure at different values of the powder bulk density is ascertained

  20. Eye-Pressing by Visually Impaired Children.

    Jan, James E.; And Others

    1983-01-01

    The nature of eye-pressing as a visual stimulation mannerism in children with severely impaired eyesight is examined, and a possible physiological explanation (that self-stimulation occurs when the demand of the brain for meaningful visual information is not met) is offered. (CL)

  1. Spontaneous pneumomediastinum after bench press training.

    Nishino, Tomoya

    2017-04-01

    Spontaneous pneumomediastinum is often associated with asthma and mainly affects adolescent males with a tall, thin body habitus. A 17-year-old man complained of chest and pharyngeal pain after bench press training and spontaneous pneumomediastinum was diagnosed. It should be considered in the differential diagnosis of chest pain of uncertain cause.

  2. A Journalist's Guide to the Free Press.

    Ingelhart, Louis

    1996-01-01

    Summarizes the content of the federal constitution and various state constitutions regarding freedom of the press. Examines certain borderline issues, including actions and expressions, pornography, defamation, libel, and copyrighted material. States that regulation of unprotected material must be reasonable, specific, and clear. Discusses what…

  3. Free Press in a Constitutional Democracy

    Lucianek, Christine

    2014-01-01

    This article describes a lesson in which students will examine several views expressed by the founders to understand the context for including freedom of the press in the First Amendment. Students will be asked to think about the role that the news media and the need to be an informed citizen continue to play in our democracy. Students will…

  4. [Report from the Student Press Law Center.

    Student Press Law Center, Washington, DC.

    The Student Press Law Center serves as a national clearinghouse to collect, analyze, and distribute information on the First Amendment rights of student journalists and journalism teachers and on violations of these rights in high schools and colleges. This report details information concerning current censorship incidents: the investigation by…

  5. When International Press Rights "Are" the News

    Freedman, Eric

    2006-01-01

    In many countries, reporters and editors face criminal prosecution, censorship, self-censorship, exile, tax audits, loss of broadcast and publication licenses, loss of jobs, assault, and even assassination based on how they practice their profession. Press rights and human rights advocacy groups try to draw media and official attention to those…

  6. Trial access to Cambridge University Press ebooks

    CERN Library

    2011-01-01

    From 1 August till 31 October, CERN users are invited to enjoy a trial access to all Cambridge University Press electronic books: http://ebooks.cambridge.org/. Please don't hesitate to send feedback to library.desk@cern.ch.

  7. Towards a Unified University Infrastructure: The Data Management Roll-Out at the University of Oxford

    James A. J. Wilson

    2013-11-01

    Full Text Available Since presenting a paper at the International Digital Curation Conference 2010 conference entitled ‘An Institutional Approach to Developing Research Data Management Infrastructure’, the University of Oxford has come a long way in developing research data management (RDM policy, tools and training to address the various phases of the research data lifecycle. Work has now begun on integrating these various elements into a unified infrastructure for the whole university, under the aegis of the Data Management Roll-out at Oxford (Damaro Project.This paper will explain the process and motivation behind the project, and describes our vision for the future. It will also introduce the new tools and processes created by the university to tie the individual RDM components together. Chief among these is the ‘DataFinder’ – a hierarchically-structured metadata cataloguing system which will enable researchers to search for and locate research datasets hosted in a variety of different datastores from institutional repositories, through Web 2 services, to filing cabinets standing in department offices. DataFinder will be able to pull and associate research metadata from research information databases and data management plans, and is intended to be CERIF compatible. DataFinder is being designed so that it can be deployed at different levels within different contexts, with higher-level instances harvesting information from lower-level instances enabling, for example, an academic department to deploy one instance of DataFinder, which can then be harvested by another at an institutional level, which can then in turn be harvested by another at a national level.The paper will also consider the requirements of embedding tools and training within an institution and address the difficulties of ensuring the sustainability of an RDM infrastructure at a time when funding for such endeavours is limited. Our research shows that researchers (and indeed departments

  8. Comparison of neonatal intensive care: Trento area versus Vermont Oxford Network

    Pederzini Fabio

    2009-03-01

    Full Text Available Abstract Background S. Chiara hospital is the only neonatal intensive care unit (NICU in the Province of Trento (Italy. It serves a population of about 460000 people with about 5000 infants per year, admitting the totality of the inborn and outborn VLBWI of the province. The aim of this work is to compare mortality, morbidity and neonatal treatment of the very low birth weight infants (VLBWI of Trento area with those recorded in the Vermont Oxford Network (VON during 2004. Methods In this retrospective analysis, the rates of complications and related treatments reported in VLBWI admitted in the S. Chiara NICU during the period 2000–2005 were compared with those recorded in the VON in 2004. The analysis included both the total populations and different weight groups. Results The frequency of inborn infants was significantly higher in Trento than in VON: 91% vs 84% (MH 8.56; p-value 0.003. The administration of prenatal steroids (82% vs 74%; MH 7.47 and p-value 0.006 and caesarean section were significantly more frequent in the Trento area than in VON. In Trento significantly more VLBWI with BW ≤ 1000 grams were given surfactant prophylaxis compared with VON and significantly fewer VLBWI in every Trento weight group developed RDS (MH 18.55; p-value 0.00001. Overall rates of complications (CLD, PDA, NEC, IVH were significantly lower than in the Vermont Oxford Network. In CLD and PDA the differences were marked also in infants weighting less than 1000 grams. Overall rates of PNX, PVL, severe grade of ROP and mortality were similar in the two populations. In Trento, significantly more infants were discharged on human milk than in VON, in both the overall population and in BW sub-groups. Conclusion On the basis of this analysis, a less aggressive therapeutic strategy based on perinatal prevention in global management, such as that employed in Trento area, may be associated with an improvement in clinical outcomes in very low birth weight infants.

  9. Press briefing on results from the solar spacecraft SOHO

    1998-04-01

    After its launch on 2 December 1995, SOHO travelled to take up a special orbit 1.5 million kilometres away on the sunward side of the Earth, where the Sun never sets. The full scientific programme began in April 1996. The occasion for the briefing is the celebration of that second anniversary and of the mission's extension to 2003. Organized by the European Space Agency, the briefing will be hosted by the Rutherford Appleton Laboratory, which is near Oxford. Leading scientists associated with SOHO will announce to the press some remarkable new discoveries about the Sun's interior, atmosphere and solar wind. They will also briefly review the main achievements of the past two years. The role of SOHO as the chief watchdog for storms on the Sun that may affect the Earth will be demonstrated. Europe's creation of the finest spacecraft ever built to observe the Sun will be recalled by a top engineer from ESA. A speaker from NASA will explain transatlantic contributions to SOHO, which is a project of international cooperation between ESA and NASA. ESA's director of science will also be present, to relate SOHO to ESA's general science programme. A lunch-time talk by the BNSC's director of science completes the line-up of speakers. This is also an exceptional opportunity for the press to meet and interview scientists from all over Europe and the USA, who are attending a meeting at the Rutherford Appleton Laboratory of SOHO's Science Working Team (SWT). Journalists are usually excluded from such meetings. The Rutherford Appleton Laboratory plays a prominent part in SOHO, particularly through its provision of the CDS ultraviolet spectrometer. A visit to the CDS group will provide a chance to see what space research is really like. Please indicate your intention to attend, on the accreditation form that follows the schedule. Guidance on how to get to the Rutherford Appleton Laboratory is appended. PROGRAMME Rutherford Appleton Laboratory (RAL), 28 April 1998 10:30 Assembly of

  10. Prima la musica: insegnare il melodramma a Oxford negli Anni 2000

    Emanuele Senici

    2011-04-01

    Full Text Available La tavola rotonda ‘L’opera monta in cattedra: didattica del melodramma’, coordinata da Lorenzo Bianconi e Annamaria Cecconi nel novembre 2007 in occasione dell’XI Colloquio di Musicologia del «Saggiatore musicale», includeva un mio breve intervento sull’esperienza didattica maturata in moduli d’argomento operistico nell’Università di Oxford, dove ho insegnato dal 1998 al 2008. L’intento era di fornire dati utili a un esercizio comparativo, il quale permettesse d’osservare le esperienze di docenti sia d’università sia di conservatorii italiani dalla prospettiva d’un sistema universitario molto diverso da ambo le istituzioni e che però, come vedremo, per le sue caratteristiche pare collocarsi a cavallo tra le due. Le pagine che seguono costituiscono un ripensamento sistematico di quelle riflessioni, nella speranza che esse possano tuttora risultare di qualche interesse a chi riflette sulla didattica del melodramma in Italia. Dopo aver delineato in breve il contesto istituzionale, presenterò un questionario proposto a due gruppi di studenti; sui risultati esporrò poi qualche riflessione conclusiva, tenendo presenti i temi proposti dal testo-base della tavola rotonda e la discussione che ebbe luogo a Bologna. Avverto infine che, benché io scriva quasi sempre al presente, ciò che dico si riferisce al periodo del mio insegnamento oxoniense: dal 2008 alcune cose possono essere cambiate.

  11. Mantel--Haenszel analysis of Oxford data. II. Independent effects of fetal irradiation subfactors

    Kneale, G.W.; Stewart, A.M.

    1976-01-01

    A Mantel-Haenszel analysis of fetal irradiation subfactors indicated that most of the extra x-rayed cases in the Oxford Survey of Childhood Cancers were radiation induced. First trimester exposures were rare but probably ten times more dangerous than later exposures. Ratios of observed: expected numbers of cancer deaths were lower for children with abnormal x-rays than for other x-rayed children, and lower for recent than remote exposures. The first of these differences was probably due to several antenatal conditions having positive associations with obstetric radiography and several causes of early (noncancer) deaths; the second one was probably due to a progressive lowering of film doses between 1940 and the present time. A rare cause of fetal irradiation (hydramnios), whose associations with congenital defects are well documented, led to the discovery that two faults in the International Classification of Diseases and Causes of Death have contributed to mistaken ideas about the etiology of childhood cancers: Neoplasms were not listed among the official causes of stillbirths, and cystic tumors of the kidneys and lungs of infants were not listed as neoplasms

  12. An Analysis of The Oxford Guide to Practical Lexicography (Atkins and Rundell 2008

    Gilles-Maurice de Schryver

    2011-10-01

    Full Text Available

    Abstract: Since at least a decade ago, the lexicographic community at large has been demandingthat a modern textbook be designed — one that would place corpora at the centre of the lexicographicenterprise. Written by two of the most respected practising lexicographers, this book hasfinally arrived, and delivers on very many levels. This review article presents a critical analysis ofits features.

    Keywords: LEXICOGRAPHY, LEARNERS' DICTIONARY, MONOLINGUAL, BILINGUAL,CORPUS, FRAME SEMANTICS, ENGLISH, FRENCH, TEXTBOOK

    Samenvatting: Een analyse van The Oxford Guide to Practical Lexicography(Atkins en Rundell 2008. Al minstens tien jaar lang eist de volledige lexicografischegemeenschap dat een modern tekstboek zou worden ontworpen — één dat corpora in het centrumvan de lexicografische belangstelling zou plaatsen. Geschreven door twee van de meest gerespecteerdepraktiserende lexicografen, is dit boek er nu eindelijk, en het ontgoochelt niet. Dit recensieartikelanalyseert de kenmerken ervan kritisch.

    Sleutelwoorden: LEXICOGRAFIE, LEERWOORDENBOEK, VERKLAREND (MONOLINGUAAL,VERTALEND (BILINGUAAL, CORPUS, FRAME SEMANTICS, ENGELS, FRANS,TEKSTBOEK

  13. Radiological characterization survey results for Gaskill Hall, Miami University, Oxford, Ohio (OXO015)

    Kleinhans, K.R.; Murray, M.E.; Carrier, R.F.

    1996-04-01

    Between October 1952 and February 1957, National Lead of Ohio (NLO), a primary contractor for the Atomic Energy Commission (AEC), subcontracted certain uranium machining operations to Alba Craft Laboratory, Incorporated, located at 10-14 West Rose Avenue, Oxford, Ohio. In 1992, personnel from Oak Ridge National Laboratory (ORNL) confirmed the presence of residual radioactive materials from the AEC-related operations in and around the facility in amounts exceeding the applicable Department of Energy (DOE) guidelines. Although the amount of uranium found on the property posed little health hazard if left undisturbed, the levels were sufficient to require remediation to bring radiological conditions into compliance with current guidelines, thus ensuring that the public and the environment are protected. Because it was suspected that uranium may have been used in the past in the immediate vicinity of Alba Craft in a Miami University building a team from ORNL, performed a radiological characterization survey of that structure in January 1994. The survey was conducted at the request of DOE as a precautionary measure to ensure that no radioactive residuals were present at levels exceeding guidelines. The survey included the determination of directly measured radiation levels and the collection of smear samples to detect possible removable alpha and beta-gamma activity levels, and comparison of these data to the guidelines. Results of the survey showed that all measurements were below the applicable guideline limits set by DOE

  14. Cross-cultural adaptation and validation of the Portuguese version of the Oxford Shoulder Score (OSS).

    Gonçalves, Rui Soles; Caldeira, Carolina Quintal; Rodrigues, Mónica Vieira; Felícia, Sabine Cardoso; Cavalheiro, Luís Manuel; Ferreira, Pedro Lopes

    2018-03-08

    To translate and culturally adapt the Oxford Shoulder Score (OSS) to the European Portuguese language, and to test its reliability (internal consistency, reproducibility and measurement error) and validity (construct validity). The OSS Portuguese version was obtained through translations, back-translations, consensus panels, clinical review and cognitive pre-test. Portuguese OSS, Disabilities of the Arm, Shoulder and Hand (DASH) questionnaires, and the visual analogue scales of pain at rest [VAS rest] and during movement [VAS movement] were applied to 111 subjects with shoulder pain (degenerative or inflammatory disorders) and recommended for physical therapy. A clinical and sociodemographic questionnaire was also applied. The reliability was good, with a Cronbach's alpha coefficient of 0.90, an intraclass correlation coefficient (ICC) of 0.92, a standard error of measurement (SEM) of 2.59 points and a smallest detectable change (SDC) of 7.18 points. Construct validity was supported by the confirmation of three initial hypotheses involving expected significant correlation between OSS and other measures (DASH, VAS rest and VAS movement) and between OSS and the number of days of work absenteeism. The Portuguese OSS version presented suitable psychometric properties, in terms of reliability (internal consistency, reproducibility and measurement error) and validity (construct validity).

  15. The Oxford SWIFT Spectrograph: first commissioning and on-sky results

    Thatte, Niranjan; Tecza, Mathias; Clarke, Fraser; Goodsall, Timothy; Fogarty, Lisa; Houghton, Ryan; Salter, Graeme; Scott, Nicholas; Davies, Roger L.; Bouchez, Antonin; Dekany, Richard

    2010-07-01

    The Oxford SWIFT spectrograph, an I & z band (6500-10500 A) integral field spectrograph, is designed to operate as a facility instrument at the 200 inch Hale Telescope on Palomar Mountain, in conjunction with the Palomar laser guide star adaptive optics system PALAO (and its upgrade to PALM3000). SWIFT provides spectra at R(≡λ/▵λ)~4000 of a contiguous two-dimensional field, 44 x 89 spatial pixels (spaxels) in size, at spatial scales of 0.235", 0.16", and 0.08" per spaxel. It employs two 250μm thick, fully depleted, extremely red sensitive 4k X 2k CCD detector arrays (manufactured by LBNL) that provide excellent quantum efficiency out to 1000 nm. We describe the commissioning observations and present the measured values of a number of instrument parameters. We also present some first science results that give a taste of the range of science programs where SWIFT can have a substantial impact.

  16. Determination of baroreflex sensitivity during the modified Oxford maneuver by trigonometric regressive spectral analysis.

    Julia Gasch

    Full Text Available BACKGROUND: Differences in spontaneous and drug-induced baroreflex sensitivity (BRS have been attributed to its different operating ranges. The current study attempted to compare BRS estimates during cardiovascular steady-state and pharmacologically stimulation using an innovative algorithm for dynamic determination of baroreflex gain. METHODOLOGY/PRINCIPAL FINDINGS: Forty-five volunteers underwent the modified Oxford maneuver in supine and 60° tilted position with blood pressure and heart rate being continuously recorded. Drug-induced BRS-estimates were calculated from data obtained by bolus injections of nitroprusside and phenylephrine. Spontaneous indices were derived from data obtained during rest (stationary and under pharmacological stimulation (non-stationary using the algorithm of trigonometric regressive spectral analysis (TRS. Spontaneous and drug-induced BRS values were significantly correlated and display directionally similar changes under different situations. Using the Bland-Altman method, systematic differences between spontaneous and drug-induced estimates were found and revealed that the discrepancy can be as large as the gain itself. Fixed bias was not evident with ordinary least products regression. The correlation and agreement between the estimates increased significantly when BRS was calculated by TRS in non-stationary mode during the drug injection period. TRS-BRS significantly increased during phenylephrine and decreased under nitroprusside. CONCLUSIONS/SIGNIFICANCE: The TRS analysis provides a reliable, non-invasive assessment of human BRS not only under static steady state conditions, but also during pharmacological perturbation of the cardiovascular system.

  17. Validity and cross-cultural adaptation of the persian version of the oxford elbow score.

    Ebrahimzadeh, Mohammad H; Kachooei, Amir Reza; Vahedi, Ehsan; Moradi, Ali; Mashayekhi, Zeinab; Hallaj-Moghaddam, Mohammad; Azami, Mehran; Birjandinejad, Ali

    2014-01-01

    Oxford Elbow Score (OES) is a patient-reported questionnaire used to assess outcomes after elbow surgery. The aim of this study was to validate and adapt the OES into Persian language. After forward-backward translation of the OES into Persian, a total number of 92 patients after elbow surgeries completed the Persian OES along with the Persian DASH and SF-36. To assess test-retest reliability, 31 randomly selected patients (34%) completed the Persian OES again after three days while abstaining from all forms of therapeutic regimens. Reliability of the Persian OES was assessed by measuring intraclass correlation coefficient (ICC) for test-retest reliability and Cronbach's alpha for internal consistency. Spearman's correlation coefficient was used to test the construct validity. Cronbach's alpha coefficient was 0.92 showing excellent reliability. Cronbach's alpha for function, pain, and social-psychological subscales was 0.95, 0.86, and 0.85, respectively. Intraclass correlation coefficient (ICC) was 0.85 for the overall questionnaire and 0.90, 0.76, and 0.75 for function, pain, and social-psychological subscales, respectively. Construct validity was confirmed as the Spearman correlation between OES and DASH was 0.80. Persian OES is a valid and reliable patient-reported outcome measure to assess postsurgical elbow status in Persian speaking population.

  18. Gut Microbiota Confers Resistance of Albino Oxford Rats to the Induction of Experimental Autoimmune Encephalomyelitis.

    Stanisavljević, Suzana; Dinić, Miroslav; Jevtić, Bojan; Đedović, Neda; Momčilović, Miljana; Đokić, Jelena; Golić, Nataša; Mostarica Stojković, Marija; Miljković, Đorđe

    2018-01-01

    Albino Oxford (AO) rats are extremely resistant to induction of experimental autoimmune encephalomyelitis (EAE). EAE is an animal model of multiple sclerosis, a chronic inflammatory disease of the central nervous system (CNS), with established autoimmune pathogenesis. The autoimmune response against the antigens of the CNS is initiated in the peripheral lymphoid tissues after immunization of AO rats with CNS antigens. Subsequently, limited infiltration of the CNS occurs, yet without clinical sequels. It has recently become increasingly appreciated that gut-associated lymphoid tissues (GALT) and gut microbiota play an important role in regulation and propagation of encephalitogenic immune response. Therefore, modulation of AO gut microbiota by antibiotics was performed in this study. The treatment altered composition of gut microbiota in AO rats and led to a reduction in the proportion of regulatory T cells in Peyer's patches, mesenteric lymph nodes, and in lymph nodes draining the site of immunization. Upregulation of interferon-γ and interleukin (IL)-17 production was observed in the draining lymph nodes. The treatment led to clinically manifested EAE in AO rats with more numerous infiltrates and higher production of IL-17 observed in the CNS. Importantly, transfer of AO gut microbiota into EAE-prone Dark Agouti rats ameliorated the disease. These results clearly imply that gut microbiota is an important factor in AO rat resistance to EAE and that gut microbiota transfer is an efficacious way to treat CNS autoimmunity. These findings also support the idea that gut microbiota modulation has a potential as a future treatment of multiple sclerosis.

  19. Validation of the Italian version of the Oxford Ankle Foot Questionnaire for children.

    Martinelli, Nicolò; Romeo, Giovanni; Bonifacini, Carlo; Viganò, Marco; Bianchi, Alberto; Malerba, Francesco

    2016-01-01

    The purpose of this study was to translate the Oxford Ankle Foot Questionnaire (OAFQ) into Italian, to perform a cross-cultural adaptation and to evaluate its psychometric properties. The Italian OAFQ was developed according to the recommended forward/backward translation protocol and evaluated in pediatric patients treated for symptomatic flatfoot deformity. Feasibility, reliability, internal consistency, construct validity [comparing OAFQ domains with Child Health Questionnaire (CHQ) domains] and responsiveness to surgical treatment were assessed. A total of 61 children and their parents were enrolled in the study. Results showed satisfactory levels of internal consistency for both children and parent forms. The test-retest reliability was confirmed by high ICC values for both child and parents subscales. Good construct validity was showed by patterns of relationships consistent with theoretically related domains of the CHQ. After surgery, the mean OAFQ scores improved in all the domains after treatment with the subtalar arthroereisis, for both children and parent scales (p valid instrument in order to evaluate interventions used to treat children's foot or ankle problem, but needs further study on different clinical settings.

  20. Graphic Arts: Book Three. The Press and Related Processes.

    Farajollahi, Karim; And Others

    The third of a three-volume set of instructional materials for a graphic arts course, this manual consists of nine instructional units dealing with presses and related processes. Covered in the units are basic press fundamentals, offset press systems, offset press operating procedures, offset inks and dampening chemistry, preventive maintenance…

  1. OFICINAS SOBRE QUEDAS E ACIDENTES DOMÉSTICOS GERAIS EM PESSOAS IDOSAS NO PROGRAMA UniversIDADE

    Jane Kelly Oliveira Friestino

    2016-08-01

    Full Text Available O envelhecimento é um processo normal do desenvolvimento do ser humano, caracterizado por mudanças fisiológicas (senescência ou patológicas (senilidade. Com o avançar da idade, as comorbidades podem estar presentes no idoso. O desempenho das atividades de vida diária fica prejudicado e, devido a alterações sensório-motoras, cognitivas e psicossociais, aumenta a vulnerabilidade para a ocorrência de quedas e acidentes domésticos, comprometendo a capacidade funcional e podendo levar à morte. O objetivo deste trabalho é apresentar o relato de experiência do oferecimento de oficinas intituladas: “Acidentes domésticos com pessoa idosa: prevenção e ação” a um grupo de idosos participantes de um programa específico para essa faixa etária. As oficinas foram ofertadas como parte do Programa de Extensão Universitária–UniversIDADE de uma Universidade pública do interior de São Paulo. Os encontros da oficina foram realizados entre maio e agosto de 2015, com duração de uma hora cada encontro, totalizando sete encontros. Uma enfermeira e uma fisioterapeuta foram mediadoras voluntárias. Os temas abordados foram: quedas, alterações sensoriais, estratégias de prevenção e ação em acidentes domésticos, queimaduras e hemorragias. Quanto aos resultados das oficinas destacaram-se a participação ativa dos idosos nas discussões dos temas abordados e a relevância dos mesmos para a prevenção dos acidentes domésticos e da ocorrência de queda. Considerou-se importante a atuação dos idosos como agentes multiplicadores das informações adquiridas nas atividades, com extensão aos seus familiares, a outros idosos de seu convívio e para sua própria qualidade de vida. Palavras-chave: Extensão Universitária, Relações Comunidade-Instituição, Acidentes domésticos, Prevenção, Saúde do Idoso.   Workshops on falls and general domestic accidents in elderly people in the UniversIDADE Program Abstract: Aging is a natural

  2. Bench press exercise: the key points.

    Padulo, J; Laffaye, G; Chaouachi, A; Chamari, K

    2015-06-01

    The bench press exercise (BPE) is receiving increasing interest as a field testing, training/therapeutic modality to improve neuromuscular performance or to increase bone mass density. Several studies have been performed using BPE as a standard for increasing upper-limb strength. For this purpose, the position of the bar, the loads, the sets, the number of repetitions, the recovery time in-between sets, the movement speed, the muscular work and the use of the determination of the one repetition maximum (1-RM) are the classical tools investigated in the literature that have been shown to affect the BPE effect on neuromuscular. The goal of the present short review is to make a picture of the current knowledge on the bench press exercise, which could be very helpful for a better understanding of this standard movement and its effects. Based on the related literature, several recommendations on these key points are presented here.

  3. Reducing VOC Press Emission from OSB Manufacturing

    Dr. Gary D. McGinnis; Laura S. WIlliams; Amy E. Monte; Jagdish Rughani: Brett A. Niemi; Thomas M. Flicker

    2001-12-31

    Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board.

  4. Method for hot pressing beryllium oxide articles

    Ballard, Ambrose H.; Godfrey, Jr., Thomas G.; Mowery, Erb H.

    1988-01-01

    The hot pressing of beryllium oxide powder into high density compacts with little or no density gradients is achieved by employing a homogeneous blend of beryllium oxide powder with a lithium oxide sintering agent. The lithium oxide sintering agent is uniformly dispersed throughout the beryllium oxide powder by mixing lithium hydroxide in an aqueous solution with beryllium oxide powder. The lithium hydroxide is converted in situ to lithium carbonate by contacting or flooding the beryllium oxide-lithium hydroxide blend with a stream of carbon dioxide. The lithium carbonate is converted to lithium oxide while remaining fixed to the beryllium oxide particles during the hot pressing step to assure uniform density throughout the compact.

  5. Freedom of the Press – two concepts

    Markus Meckl

    2015-03-01

    Full Text Available In 1644 the debate for freedom of expression started in modern times thanks to John Milton’s Areopagitica, where he still argued about God in order to justify his quest for freedom. With the enlightenment God lost his unifying role for society and could no longer serve as justification. Two arguments were brought then forward to justify freedom of the press: One by the continental movement of the enlightenment; the other from within the movement of utilitarianism, and most influentially by John Stuart Mill. Both underlined the importance of truth; however, they differed in their understanding on what truth was good for. This difference in their arguments had a lasting impact on the debate on the limits of freedom of the press.

  6. Analysis of Institutional Press Releases and its Visibility in the Press

    José Antonio Alcoceba-Hernando, Ph.D.

    2010-01-01

    Full Text Available The relationships between institutional communication and media communication influence the shaping of social representations of public issues. This research article analyses these relationships based on the case study of the external communication of a public institution, the press releases of Spain’s Youth Institute (Instituto de la Juventud, aka, Injuve, during three years and their repercussion in the press during the same period of time. The results obtained in this research allowed drawing conclusions on the types of communication production of the aforementioned institution and the news treatment of such pieces of information by the printed and digital media. The press releases and the news items were studied using quantitative media content analysis which focused, especially, in referential issues like the information treatment, the thematic analysis, youth representations in the case of the releases; and the visibility of the press releases in the making of news

  7. ACTIVATED HOT PRESSING BEHAVIOR OF WC NANOPOWDERS

    Edwin GEVORKYAN

    2010-06-01

    Full Text Available The questions of consolidation of nanopowders concerning hot compaction by pressing activated by electric current action are considered. Mechanisms of grain boundary creep-sliding which are sequentially prevalent in a forming of compacted structures under influence of temperature factor and in the presence of a direct electric heating are discussed. Structural-transformational sources and conditions of forming of high physical-mechanical properties of nanopowder refractory solid-state products are described.

  8. The antimatter. Press breakfast 23 may 2000

    Spiro, M.; Dejardin, M.; Debu, P.; Aleksan, R.

    2000-05-01

    This document brings together the subjects discussed during the Press breakfast of 23 may 2000 on the antimatter, with scientists of the CEA and the CNRS. It presents the research programs and the experiments on the antimatter and the symmetry violation: the CP LEAR and the NA48 experiments at CERN, the BaBar detector at SLAC, the fundamental research at the CEA and the impacts on the energy policy. It provides also links for more detailed inquiries. (A.L.B.)

  9. Press conference of the 15 october 2002

    2002-10-01

    Facing the public hostile purposes of october 2002, concerning the renewable energies, Andre Antolini, President of the renewable energies syndicate, proposed a press conference to give information, data and realizations on the renewable energies. The text of the conference is presented, as data on employment, biofuels, the wind energy, the hydro-electricity the greenhouse effect fight, the public opinion, the solar heating, the photovoltaic and the future projects and electric power supply for 2010. (A.L.B.)

  10. Design of jigs, fixtures and press tools

    Venkataraman, K

    2015-01-01

    Textbook presenting the fundamentals of tool design with special focus on jigs, fixtures and die design Covers sections on sheet metal forming processes; turning, grinding, broaching, welding and modular fixtures; principles of clamping; and an Introduction to Presses and Auxiliary Equipment Author has many years' experience in both academic and industrial environments, and presents this work in an easily-accessible style End of chapter questions and answers assist the learning process for both practicing tooling designers and engineers, and manufacturing en

  11. Quality of life after TIA and stroke: ten-year results of the Oxford Vascular Study.

    Luengo-Fernandez, Ramon; Gray, Alastair M; Bull, Linda; Welch, Sarah; Cuthbertson, Fiona; Rothwell, Peter M

    2013-10-29

    To evaluate the 5-year impact of stroke and TIA on utility and quality-adjusted survival. TIA and stroke patients from a UK population-based study (Oxford Vascular Study) were recruited from 2002 to 2007, and followed up until 2012. Quality of life was assessed over 5 years using the EQ-5D (EuroQol-5 Dimensions), with responses converted into utilities ranging from -0.59 (worse than death) to 1 (perfect health), using UK population valuations. Utilities for stroke and TIA patients were compared with those in matched controls obtained from the 2006 Health Survey for England. Five-year quality-adjusted life years were estimated by combining utility and survival information. Four hundred forty TIA and 748 stroke patients were ascertained and included. Utility remained constant at approximately 0.78 over the 5 years after TIA. Utility improved from 0.64 one month after stroke to 0.70 at 6 months (p = 0.006), remaining at approximately 0.70 thereafter. Matched controls had considerably higher utility levels than stroke/TIA patients (0.85, p TIA and 2.21 (2.15-2.37) after stroke, varying considerably by severity (minor: 2.94; moderate: 1.65; and severe: 0.70). Quality-adjusted survival is low over the 5 years after stroke and TIA, with severity and recurrent stroke being major predictors. There remains considerable scope for improvements in acute treatment and secondary prevention to improve the quality of life after TIA and stroke.

  12. Clinical Outcomes and Risks of Single-stage Bilateral Unicompartmental Knee Arthroplasty via Oxford Phase III

    Tong Ma

    2015-01-01

    Full Text Available Background: Osteoarthritis often affects the joint bilaterally, and the single-stage (SS unicompartmental knee arthroplasty (UKA is advantageous in terms of a single anesthesia administration, a short hospital stay, lower medical costs, and enhanced patient convenience. However, the complication risk of SS UKA continues to be debated. The aim of this article was to evaluate the clinical effectiveness, complications, and functional recovery of SS and two-stage (TS UKA. Methods: From January 2008 to December 2013, we compared a series of 36 SS UKA with 45 TS UKA for osteoarthritis. The mean age was 65.4 years (range: 55-75 years. The mean body mass index was 25.2 kg/m 2 (range: 22-29 kg/m 2 . The pre- and post-operative Oxford Knee Scores (OKSs, complications, operative times, tourniquet times, the amount of drainage, and hemoglobin (Hb were evaluated. The Chi-square test, Fisher′s exact test, and paired and grouped t-tests were used in this study. Results: The mean follow-up was 50 months. No complications of death, fat embolism, deep vein thrombosis, and prosthetic infection were reported. Patients who underwent SS UKA had a shorter cumulative anesthesia time (113.5 vs. 133.0 min, P 0.05. At the final follow-up, the mean OKS improved from 39.48 ± 5.69 to 18.83 ± 3.82 (P 0.05. Patients who underwent SS UKA had a faster recovery. Conclusions: The single-staged UKA offers the benefits of a single anesthesia administration, reduced total anesthetic time, decreased overall rehabilitation time, and absence of an increase in perioperative mortality or complications compared with the TS bilateral UKA.

  13. Postremediation dose assessment for the former Alba Craft Laboratory site, Oxford, Ohio

    Kamboj, S.; Nimmagadda, M.; Yu, C.

    1996-04-01

    Potential maximum radiation dose rates were calculated for the former Alba Craft Laboratory site in Oxford, Ohio, which was involved in machining of uranium metal in the 1950s for the U.S. atomic energy program. The site is not currently being used. The residual radioactive material guidelines (RESRAD) computer code, which implements the methodology described in the US Department of Energy's (DOE's) manual for establishing residual radioactive material guidelines, was sued in this evaluation. Three potential land use scenarios were considered for the former Alba Craft site; the scenarios vary with regard to the type of site use, time spent at the site by the exposed individual, and sources of food consumed. Scenario A (a possible land use scenario) assumed industrial use of the site; Scenario B (a likely future land use scenario) assumed residential use of the site; and Scenario C (a possible but unlikely land use scenario) assumed the presence of a resident farmer. For scenario A, it was assumed that any water used for domestic or industrial activities would be from uncontaminated off-site municipal sources. The water used for drinking, household purposes, and irrigation was assumed to be from uncontaminated municipal sources in Scenario B; groundwater drawn from a well located at the downgradient edge of the contaminated zone would be the only source of water for drinking, irrigation, and raising livestock in Scenario C. The results of the evaluation indicated that the DOE dose limit of 100 mrem/yr would not be exceeded for any of the scenarios analyzed. The potential maximum dose rates for Scenarios A, B, and C are 0.64, 2.0, and 11 mrem/yr, respectively

  14. The Oxford Ankle Foot Questionnaire for children: responsiveness and longitudinal validity.

    Morris, Christopher; Doll, Helen; Davies, Neville; Wainwright, Andrew; Theologis, Tim; Willett, Keith; Fitzpatrick, Ray

    2009-12-01

    To evaluate how scores from the Oxford Ankle Foot Questionnaire change over time and with treatment using both distribution-based and anchor-based approaches. Eighty children aged 5-16 and their parent or career completed questionnaires at orthopaedic or trauma outpatient clinics. They were asked to complete and return a second set of questionnaires again within 2 weeks (retest), and then mailed a third set of questionnaires to complete again after 2 months (follow-up). The follow-up questionnaires included a global rating of change 'transition' item. Child- and parent-reported mean domain scores (Physical, School & Play, and Emotional) were all stable at retest, whereas positive mean changes were observed at follow-up. As we hypothesised, trauma patients had poorer scores than elective patients at baseline, and showed greater improvement at follow-up. For trauma patients, mean changes in per cent scores were large (scores improved between 40 and 56 for the Physical and School & Play domains, and 17 and 21 for Emotional); all effect sizes (ES) were large (>0.8). For elective patients, the mean improvement in per cent scores were more moderate (Physical: child 10, ES = 0.4, parent 11, ES = 0.5; School & Play child 0, ES = 0, parent 9 ES = 0.4; Emotional: child 6, ES = 0.2; parents 8, ES > 0.3). Minimal detectable change (MDC(90)), an indication of measurement error, ranged from 6 to 8. Half the standard deviation of baseline scores ranged from 11 to 18. Minimal important difference could only be calculated for elective patients (9 child and 13 parent ratings), these ranged from 7 to 17. The findings support the responsiveness and longitudinal validity of the scales. Changes in domain scores of, or exceeding, the MDC(90) (6-8) are likely to be beyond measurement error; further work is required to refine the estimate of change that can be considered important.

  15. Anatomical masking of pressure footprints based on the Oxford Foot Model: validation and clinical relevance.

    Giacomozzi, Claudia; Stebbins, Julie A

    2017-03-01

    Plantar pressure analysis is widely used in the assessment of foot function. In order to assess regional loading, a mask is applied to the footprint to sub-divide it into regions of interest (ROIs). The most common masking method is based on geometric features of the footprint (GM). Footprint masking based on anatomical landmarks of the foot has been implemented more recently, and involves the integration of a 3D motion capture system, plantar pressure measurement device, and a multi-segment foot model. However, thorough validation of anatomical masking (AM) using pathological footprints has not yet been presented. In the present study, an AM method based on the Oxford Foot Model (OFM) was compared to an equivalent GM. Pressure footprints from 20 young healthy subjects (HG) and 20 patients with clubfoot (CF) were anatomically divided into 5 ROIs using a subset of the OFM markers. The same foot regions were also identified by using a standard GM method. Comparisons of intra-subject coefficient of variation (CV) showed that the OFM-based AM was at least as reliable as the GM for all investigated pressure parameters in all foot regions. Clinical relevance of AM was investigated by comparing footprints from HG and CF groups. Contact time, maximum force, force-time integral and contact area proved to be sensitive parameters that were able to distinguish HG and CF groups, using both AM and GM methods However, the AM method revealed statistically significant differences between groups in 75% of measured variables, compared to 62% using a standard GM method, indicating that the AM method is more sensitive for revealing differences between groups. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Repeatability of the Oxford Foot Model in children with foot deformity.

    McCahill, Jennifer; Stebbins, Julie; Koning, Bart; Harlaar, Jaap; Theologis, Tim

    2018-03-01

    The Oxford Foot Model (OFM) is a multi-segment, kinematic model developed to assess foot motion. It has previously been assessed for repeatability in healthy populations. To determine the OFM's reliability for detecting foot deformity, it is important to know repeatability in pathological conditions. The aim of the study was to assess the repeatability of the OFM in children with foot deformity. Intra-tester repeatability was assessed for 45 children (15 typically developing, 15 hemiplegic, 15 clubfoot). Inter-tester repeatability was assessed in the clubfoot population. The mean absolute differences between testers (clubfoot) and sessions (clubfoot and hemiplegic) were calculated for each of 15 clinically relevant, kinematic variables and compared to typically developing children. Children with clubfoot showed a mean difference between visits of 2.9° and a mean difference between raters of 3.6° Mean absolute differences were within one degree for the intra and inter-rater reliability in 12/15 variables. Hindfoot rotation, forefoot/tibia abduction and forefoot supination were the most variable between testers. Overall the clubfoot data were less variable than the typically developing population. Children with hemiplegia demonstrated slightly higher differences between sessions (mean 4.1°), with the most reliable data in the sagittal plane, and largest differences in the transverse plane. The OFM was designed to measure different types of foot deformity. The results of this study show that it provides repeatable results in children with foot deformity. To be distinguished from measurement artifact, changes in foot kinematics as a result of intervention or natural progression over time must be greater than the repeatability reported here. Copyright © 2018 Elsevier B.V. All rights reserved.

  17. Sensitivity of the Oxford Foot Model to marker misplacement: A systematic single-case investigation.

    Carty, Christopher P; Walsh, Henry P J; Gillett, Jarred G

    2015-09-01

    The purpose of this paper was to systematically assess the effect of Oxford Foot Model (OFM) marker misplacement on hindfoot relative to tibia, and forefoot relative to hindfoot kinematic calculations during the stance phase of gait. Marker trajectories were recorded with an 8-camera motion analysis system (Vicon Motion Systems Ltd., UK) and ground reaction forces were recorded from three force platforms (AMTI, USA). A custom built marker cluster consisting of 4 markers in a square arrangement (diagonal distance 2 cm) was used to assess the effect of marker misplacement in the superior, inferior, anterior and posterior direction for the sustentaculum tali (STL), the proximal 1st metatarsal (P1M), distal 5th metatarsal (D5M), proximal 5th metatarsal (P5M) and lateral calcaneus (LCA) markers. In addition manual movement of the heel complex 1 cm superiorly, inferiorly, medially and laterally, and also an alignment error of 10° inversion and 10° eversion was assessed. Clinically meaningful effects of marker misplacement were determined using a threshold indicating the minimal clinically important difference. Misplacement of the heel-wand complex had the most pronounced effect on mean kinematic profiles during the stance phase across all degrees-of-freedom with respect to hindfoot-tibia and forefoot-hindfoot angles. Vertical marker misplacement of the D5M and P5M markers affected the sagittal plane, and to a lesser extent frontal plane, forefoot-hindfoot kinematics. In conclusion, the OFM is highly sensitive to misplacement of the heel-wand complex in all directions and the P5M marker in the vertical direction. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

  18. Analysis of foot kinematics wearing high heels using the Oxford foot model.

    Wang, Meizi; Gu, Yaodong; Baker, Julien Steven

    2018-04-29

    Wearing high heels is thought to lead to various foot disorders and injuries such as metatarsal pain, Achilles tendon tension, plantar fasciitis and Haglund malformation. However, there is little available information explaining the specific mechanisms and reasons why wearing high heels causes foot deformity. Therefore, the purpose of this study was to investigate the foot kinematics of high heel wearers and compare any differences with barefoot individuals using the Oxford Foot Model (OFM). Fifteen healthy women aged 20-25 years were measured while walking barefoot and when wearing high heels. The peak value of angular motion for the hallux with respect to the forefoot, the forefoot with respect to the hind foot, and the hind foot with respect to the tibia were all analyzed. Compared to the barefoot, participants wearing high heels demonstrated larger hallux dorsiflexion (22.55∘± 1.62∘ VS 26.6∘± 2.33∘ for the barefoot; P= 0.001), and less hallux plantarflexion during the initial stance phase (-4.86∘± 2.32∘ VS -8.68∘± 1.13∘; Pfoot demonstrated a larger dorsiflexion in the horizontal plane (16.59∘± 1.69∘ VS 12.08∘± 0.9∘; Pfoot extension rotation (-5.49∘± 0.69∘ VS -10.73∘± 0.42∘; P= 0.001). These findings complement existing kinematic evidence that wearing high heels can lead to foot deformities and injuries.

  19. The Vermont oxford neonatal encephalopathy registry: rationale, methods, and initial results

    2012-01-01

    Background In 2006, the Vermont Oxford Network (VON) established the Neonatal Encephalopathy Registry (NER) to characterize infants born with neonatal encephalopathy, describe evaluations and medical treatments, monitor hypothermic therapy (HT) dissemination, define clinical research questions, and identify opportunities for improved care. Methods Eligible infants were ≥ 36 weeks with seizures, altered consciousness (stupor, coma) during the first 72 hours of life, a 5 minute Apgar score of ≤ 3, or receiving HT. Infants with central nervous system birth defects were excluded. Results From 2006–2010, 95 centers registered 4232 infants. Of those, 59% suffered a seizure, 50% had a 5 minute Apgar score of ≤ 3, 38% received HT, and 18% had stupor/coma documented on neurologic exam. Some infants experienced more than one eligibility criterion. Only 53% had a cord gas obtained and only 63% had a blood gas obtained within 24 hours of birth, important components for determining HT eligibility. Sixty-four percent received ventilator support, 65% received anticonvulsants, 66% had a head MRI, 23% had a cranial CT, 67% had a full channel encephalogram (EEG) and 33% amplitude integrated EEG. Of all infants, 87% survived. Conclusions The VON NER describes the heterogeneous population of infants with NE, the subset that received HT, their patterns of care, and outcomes. The optimal routine care of infants with neonatal encephalopathy is unknown. The registry method is well suited to identify opportunities for improvement in the care of infants affected by NE and study interventions such as HT as they are implemented in clinical practice. PMID:22726296

  20. Simple shoulder test and Oxford Shoulder Score: Persian translation and cross-cultural validation.

    Naghdi, Soofia; Nakhostin Ansari, Noureddin; Rustaie, Nilufar; Akbari, Mohammad; Ebadi, Safoora; Senobari, Maryam; Hasson, Scott

    2015-12-01

    To translate, culturally adapt, and validate the simple shoulder test (SST) and Oxford Shoulder Score (OSS) into Persian language using a cross-sectional and prospective cohort design. A standard forward and backward translation was followed to culturally adapt the SST and the OSS into Persian language. Psychometric properties of floor and ceiling effects, construct convergent validity, discriminant validity, internal consistency reliability, test-retest reliability, standard error of the measurement (SEM), smallest detectable change (SDC), and factor structure were determined. One hundred patients with shoulder disorders and 50 healthy subjects participated in the study. The PSST and the POSS showed no missing responses. No floor or ceiling effects were observed. Both the PSST and POSS detected differences between patients and healthy subjects supporting their discriminant validity. Construct convergent validity was confirmed by a very good correlation between the PSST and POSS (r = 0.68). There was high internal consistency for both the PSST (α = 0.73) and the POSS (α = 0.91 and 0.92). Test-retest reliability with 1-week interval was excellent (ICCagreement = 0.94 for PSST and 0.90 for POSS). Factor analyses demonstrated a three-factor solution for the PSST (49.7 % of variance) and a two-factor solution for the POSS (61.6 % of variance). The SEM/SDC was satisfactory for PSST (5.5/15.3) and POSS (6.8/18.8). The PSST and POSS are valid and reliable outcome measures for assessing functional limitations in Persian-speaking patients with shoulder disorders.

  1. Natural cold pressed oils as cosmetic products

    Małgorzata Ligęza

    2016-12-01

    Full Text Available Background. It seems that patients may ask general practitioners about natural cosmetics applied on the skin regarding their safety and suitability. Objectives. The aim of the study was to analyze natural cold pressed oils as potential cosmetic products. Material and methods. Cold pressed oils obtained from selected seeds and fruit stones were analyzed, including: chokeberry seed oil, blackcurrant seed oil, elderberry seed oil, raspberry seed oil, apricot seed oil, tomato seed oil, strawberry seed oil, broccoli seed oil, Nigella sativa seed oil, hemp oil, safflower seed oil, Silybum marianum seed oil and coconut oil. 80 adult volunteers assessed the cosmetic properties of the analyzed oils. Each of the volunteers tested 2 to 4 different oils, by applying them on the skin. In addition, patch tests with all analyzed oils were performed on 23 individuals. Results. The majority of tested oils were positively evaluated by the participants: in the opinion of the participants, oil extracted from safflower had the best appearance (100% positive opinions, coconut oil had the best smell (70% positive opinions, while black currant seed oil showed the best absorbency (85% positive opinions. No irritation was observed within the analyzed product group, albeit one allergic reaction to apricot seed oil was observed with patch testing. Conclusions . Based on the achieved results, it could be suggested that natural cold pressed oils can be applied to the skin as cosmetics. Our observations may be helpful for general practitioners when choosing natural cosmetics.

  2. Forming of AHSS using Servo-Presses

    Groseclose, Adam Richard

    Stamping of Advanced High Strength Steel (AHSS) alloys poses several challenges due to the material's higher strength and low formability compared to conventional steels and other problems such as (a) inconsistency of incoming material properties, (b) ductile fracture during forming, (c) higher contact pressure and temperature rise during forming, (d) higher die wear leading to reduced tool life, (e) higher forming load/press capacity, and (f) large springback leading to dimensional inaccuracy in the formed part. [Palaniswamy et. al., 2007]. The use of AHSS has been increasing steadily in automotive stamping. New AHSS alloys (TRIP, TWIP) may replace some of the Hot Stamping applications. Stamping of AHSS alloys, especially higher strength materials, 780 MPa and higher, present new challenges in obtaining good part definition (corner and fillet radii), formability (fracture and resulting scrap) and in reducing springback. Servo-drive presses, having the capability to have infinitely variable and adjustable ram speed and dwell at BDC, offer a potential improvement in quality, part definition, and springback reduction especially when the infinitely adjustable slide motion is used in combination with a CNC hydraulic cushion. Thus, it is desirable to establish a scientific/engineering basis for improving the stamping conditions in forming AHSS using a servo-drive press.

  3. The Words First Attested in Shakespeare and Their Later Obsolescence : A Study Based on the Oxford English Dictionary

    鉄村, 明美

    2017-01-01

    The aim of this study was to classify the words that first attested in Shakespeare’s works and to investigate the characteristics of ‘obsolete’ words in the texts with reference to the Oxford English Dictionary. The words first attested in Shakespeare’s works were selected using the Oxford English Dictionary Online. Next, these words were divided into two groups: ‘obsolete lexical items’ and ‘current lexical items’. The results for each of Shakespeare’s works and for sources of neologisms(der...

  4. Georges Lemaître et la théorie du big bang qu'y avait-t-il au commencement de l'univers ?

    Landa, Pauline

    2015-01-01

    Découvrez enfin tout ce qu'il faut savoir sur Georges Lemaître et ses inventions en moins d'une heure !L'origine de l'univers, voilà une problématique qui a tenu en haleine de très nombreux scientifiques. Alors que l'on pourrait croire que l'homme s'est posé cette question depuis la nuit des temps, il n'en est rien. C'est Georges Lemaître, un prêtre belge et grand astrophysicien, qui le premier cherche à dater l'univers et à tenter de découvrir ce qu'il y avait au commencement, alors même que l'ensemble de la communauté scientifique était persuadé qu'il avait toujours exis

  5. Rasch analysis of the Dutch version of the Oxford elbow score

    de Haan J

    2011-08-01

    Full Text Available Jeroen de Haan1, Niels Schep2, Wim Tuinebreijer2, Peter Patka2, Dennis den Hartog21Department of Surgery and Traumatology, Westfriesgasthuis, Hoorn, the Netherlands; 2Department of Surgery and Traumatology, Erasmus MC, University Medical Center Rotterdam, Rotterdam, the NetherlandsBackground: The Oxford elbow score (OES is a patient-rated, 12-item questionnaire that measures quality of life in relation to elbow disorders. This English questionnaire has been proven to be a reliable and valid instrument. Recently, the OES has been translated into Dutch and examined for its reliability, validity, and responsiveness in a group of Dutch patients with elbow pathology. The aim of this study was to analyze the Dutch version of the OES (OES-DV in combination with Rasch analysis or the one-parameter item response theory to examine the structure of the questionnaire.Methods: The OES-DV was administered to 103 patients (68 female, 35 male. The mean age of the patients was 44.3 ± 14.7 (range 15–75 years. Rasch analysis was performed using the Winsteps® Rasch Measurement Version 3.70.1.1 and a rating scale parameterization.Results: The person separation index, which is a measure of person reliability, was excellent (2.30. All the items of the OES had a reasonable mean square infit or outfit value between 0.6 and 1.7. The threshold of items were ordered, so the categories can function as intended. Principal component analysis of the residuals partly confirmed the multidimensionality of the English version of the OES. The OES distinguished 3.4 strata, which indicates that about three ranges can be differentiated.Conclusion: Rasch analysis of the OES-DV showed that the data fit to the stringent Rasch model. The multidimensionality of the English version of the OES was partly confirmed, and the four items of the function and three items of the pain domain were recognized as separate domains. The category rating scale of the OES-DV works well. The OES can

  6. The reliability, validity and responsiveness of the Dutch version of the Oxford elbow score

    Patka Peter

    2011-07-01

    Full Text Available Abstract Background The Oxford elbow score (OES is an English questionnaire that measures the patients' subjective experience of elbow surgery. The OES comprises three domains: elbow function, pain, and social-psychological effects. This questionnaire can be completed by the patient and used as an outcome measure after elbow surgery. The aim of this study was to develop and evaluate the Dutch version of the translated OES for reliability, validity and responsiveness with respect to patients after elbow trauma and surgery. Methods The 12 items of the English-language OES were translated into Dutch and then back-translated; the back-translated questionnaire was then compared to the original English version. The OES Dutch version was completed by 69 patients (group A, 60 of whom had an elbow luxation, four an elbow fracture and five an epicondylitis. QuickDASH, the visual analogue pain scale (VAS and the Mayo Elbow Performance Index (MEPI were also completed to examine the convergent validity of the OES in group A. To calculate the test-retest reliability and responsiveness of the OES, this questionnaire was completed three times by 43 different patients (group B. An average of 52 days elapsed between therapy and the administration of the third OES (SD = 24.1. Results The Cronbach's α coefficients for the function, pain and social-psychological domains were 0.90, 0.87 and 0.90, respectively. The intra-class correlation coefficients for the domains were 0.87 for function, 0.89 for pain and 0.87 for social-psychological. The standardised response means for the domains were 0.69, 0.46 and 0.60, respectively, and the minimal detectable changes were 27.6, 21.7 and 24.0, respectively. The convergent validity for the function, pain and social-psychological domains, which were measured as the Spearman's correlation of the OES domains with the MEPI, were 0.68, 0.77 and 0.77, respectively. The Spearman's correlations of the OES domains with QuickDASH were

  7. 19th Biennial International Nineteenth-Century Music Conference, Faculty of Music, University of Oxford, 11.-13. 7. 2016

    Myslivcová, Eva

    2016-01-01

    Roč. 53, 2-3 (2016), s. 300-301 ISSN 0018-7003. [19th Biennial International Nineteenth-Century Music Conference. Oxford, 11.07.2016-13.07.2016] Institutional support: RVO:68378076 Keywords : music ological conference * nineteenth-century music * Antonin Dvorak * opera Subject RIV: AL - Art, Architecture, Cultural Heritage

  8. The Psychometric Analysis of the Persian Version of the Strategy Inventory for Language Learning of Rebecca L. Oxford

    Fazeli, Seyed Hossein

    2012-01-01

    The current study aims to analyze the psychometric qualities of the Persian adapted version of Strategy Inventory for Language Learning (SILL) developed by Rebecca L. Oxford (1990). Three instruments were used: Persian adapted version of SILL, a Background Questionnaire, and Test of English as a Foreign Language. Two hundred and thirteen Iranian…

  9. Translation and validation of the Dutch version of the Oxford 12-item knee questionnaire for knee arthroplasty

    Haverkamp, Daniël; Breugem, Stefan J. M.; Sierevelt, Inger N.; Blankevoort, Leendert; van Dijk, C. Nick

    2005-01-01

    Background In 1998, the Oxford 12-item knee questionnaire was developed by Dawson et al. as a self-administered disease- and site-specific questionnaire, specifically developed for knee arthroplasty patients. Since then, it has proven to be an effective outcome questionnaire, and is widely used.

  10. Comparison between the Harris- and Oxford Hip Score to evaluate outcomes one-year after total hip arthroplasty

    Weel, Hanneke; Lindeboom, Robert; Kuipers, Sander E.; Vervest, Ton M. J. S.

    2017-01-01

    Harris Hip Score (HHS) is a surgeon administered measurement for assessing hip function before and after total hip arthroplasties (THA). Patient reported outcome measurements (PROMs) such as the Oxford Hip Score (OHS) are increasingly used. HHS was compaired to the OHS assessing whether the HHS can

  11. Tjekkoslovakisk presse år 2

    Rudolf Prevratil

    1991-09-01

    Full Text Available Danske teleselskaber overvejer at etablere sig som kabeloperatører i Polen, mens et amerikansk selskab allerede er igang i Warszawa og Krakow. Franske lokalradionetworks opretter filialer i Polen og Tjekko- slovakiet. Den tjekkiske statsradio stiller sendenet til rådighed for Radio Free Europe. Springer-koncernen opretter en "østtysk" pendant til Bild, hvis redaktionelle hovedlinje lægger sig op ad de dybe sociale frustrati- oner, der fulgte med DDR's indlemmelse i BDR. Maxwell, Hersant og Berlusconi m.fl. etablerer sig alene eller med lokale konstellationer inden for trykt presse i flere øst- og mellemeuropæiske stater. Samtidig for- søger den tidligere undergrundspresse at vinde økonomisk og politisk fodfæste inden for markedets og "det legale samfunds" rammer, i kon- kurrence med fortidens mediemutanter og vestlige mediekoncerner. Rudolf Prevratils artikel er en refleksion over en del af de problemer, primært af økonomisk og politisk art, som har tårnet sig op for den tjek- koslovakiske presse efter fløjlsrevolutionen i november 1989. Den giver et billede af dagens situation og får gennem sine analyser påvist, at etab- lingen af en demokratisk presse i Tjekkoslovakiet ikke alene er afhængig af "hjælp udefra", men i nok så høj grad forudsætter et net af sociale og kulturelle udviklingsprocesser, som både anerkender opgøret med for- tiden og vedkender sig den historiske arv. Artiklen er oversat fra engelsk af Per Jauert.

  12. Press Freedom on the Media Agenda

    Pires, Terezinha Maria de Carvalho Cruz

    2007-01-01

    This article proposes to present a refl ection on the meanings constructed by the Brazilian written press regarding media and democracy. For this, it was necessary to recompose a specifi c journalistic event: the submission to the Brazilian Congress of a bill to create the Federal Journalism Council by the Brazilian President, Luiz Inácio Lula da Silva, at the request of the National Journalists Federation in August, 2004. This procedure gave rise to something rarely seen: the media were in the...

  13. Pocketbook of the economic press 1994

    Kroll, J.M.

    1994-01-01

    The present 34th edition of this pocketbook gives an overview of German economic journalists with their specific branches, important specialist newspaper editorial boards, the economic editors of the daily-, weekly- and public press, radio and television broadcusting stations as well as news-, information- and teletext services. In addition, 1600 public relations offices of industrial businesses, industry and trade chambers and universities are given. It concludes with information on authorities at a national and county level and more than 1200 business groups and leading bodies. (BWI) [de

  14. WordPress all-in-one for dummies

    Sabin-Wilson, Lisa

    2013-01-01

    Top WordPress guide, now fully updated for the latest WordPress release! This updated new edition comprises one of the largest collections of practical intermediate to advanced information on WordPress. Fully updated for the latest WordPress release, this in-depth book covers it all, from setting up your software to publishing your site, using SEO and social media, developing and using plug-ins, running multiple sites with WordPress, and more. Veteran author Lisa Sabin-Wilson is a top authority on WordPress, and she and her co-authors pack this book with essential and easy-to-follo

  15. Effect of hot pressing additives on the leachability of hot pressed sodium hydrous titanium oxide

    Valentine, T.M.; Sambell, R.A.J.

    1980-01-01

    Sodium hydrous titanium oxide is an ion exchange resin which can be used for immobilizing medium level waste (MLW) liquors. When hot pressed, it undergoes conversion to a ceramic. Three low melting point materials (borax, bismuth trioxide, and a mixture of PbO/CuO) were added to the (Na)HTiO and the effect that each of these had on aiding densification was assessed. Hot pressing temperature, applied pressure, and percentage addition of hot pressing aid were varied. Percentage open porosity, flexural strength, and leachability were measured. There was a linear relationship between the percentage open porosity and the logarithm of the leach rate for a constant percentage addition of each additive

  16. The press media and the risk perception

    Manetti, Cristiane Teixeira

    2009-01-01

    In this study it was identified the frequency of negative and positive news on the nuclear question in the press media. Due to the complexity of the matter, we opt to perform a study case that could illustrate the theoretical discussion presented in this research. Thus, due to the constant presence of news related to IPCC meeting, in the national and foreign press, we opt to focus our study on one year period just after the release of the 4th IPCC Report, in February of 2007. The research was centered only in the printed matters, since there is significant differences between the printed media and others, like TV, radio or web, restricting the use of the same bibliographical reference. In this study it was collected journalistic material involving the nuclear energy and was verified the predominant speech of the vehicles of communication and the sources of information. It was noted the predominance of positive articles, mainly due to the weight of the favorable speeches by authorities, cited as the most frequent in the paper. The negative approach almost always was assumed by the ONGs in general, as expected, due to the its well known position in the treatment of matters related to the nuclear energy. Also it is important to point out that all the tracked vehicles of information mixed positive and negative news articles on the subject; and evidences of hegemonic speech by official sources had been observed. (author)

  17. A CONCEPTUAL APPROACH ON PRESS CONFERENCE

    Ioana Olariu

    2015-07-01

    Full Text Available A press conference is an important tool of public relations. The primary role of public relations is to manage a company’s reputation and help build public consent for its enterprises. The goal of PR is to develop and maintain goodwill with most, if not all, of its publics. Failure to do so may mean loss of customers and revenues, time lost dealing with complaints or lawsuits, and loss of esteem. A company’s publics change constantly. Well-executed public relations is an ongoing process that molds good long-term relationships and plays an important role in relationship marketing and integrated communications. Companies often call press conference when they have significant news to announce, such as the introduction of a new product or advertising campaign. Although used less often by organizations and corporations, this form of delivery can be very effective. The topic must be of major interest to a specific group before it is likely to gain coverage.

  18. Press Conference: LHC Restart, Season 2

    CERN. Geneva

    2015-01-01

    PRESS BRIEFING ON THE LARGE HADRON COLLIDER (LHC) RE-START, SEASON 2 AT CERN, GLOBE OF SCIENCE AND INNOVATION Where :   http://cern.ch/directions   at the Globe of Science and Innovation When : Thursday, 12 March from 2.30 to 3.30pm - Open seating as from 2.15pm Speakers : CERN’s Director General, Rolf Heuer and Director of Accelerators, Frédérick Bordry, and representatives of the LHC experiments Webcast : https://webcast.web.cern.ch/webcast/ Dear Journalists, CERN is pleased to invite you to the above press briefing which will take place on Thursday 12 March, in the Globe of Science and Innovation, 1st floor, from 2.30 to 3.30pm. The Large Hadron Collider (LHC) is ready to start up for its second three-year run. The 27km LHC is the largest and most powerful particle accelerator in the world operating at a temperature of -217 degrees Centigrade and powered to a current of 11,000 amps. Run 2 of the LHC follows a two-year technical s...

  19. Searching for a Free Press in Indian Country.

    Benton, Sherrole

    1994-01-01

    Describes the tribally controlled media's efforts to provide a form of checks and balances against the tribal council on behalf of the tribal community. Examines the issue of freedom of the tribal press, suggesting that tribal council's control of press's operating funds may limit press freedom. (MAB)

  20. STS-114: Discovery Launch Readiness Press Conference

    2005-01-01

    Michael Griffin, NASA Administrator; Wayne Hale, Space Shuttle Deputy Program Manager; Mike Wetmore, Director of Shuttle Processing; and 1st Lieutenant Mindy Chavez, Launch Weather Officer-United States Air Force 45th Weather Squadron are in attendance for this STS-114 Discovery launch readiness press conference. The discussion begins with Wayne Hale bringing to the table a low level sensor device for everyone to view. He talks in detail about all of the extensive tests that were performed on these sensors and the completion of these ambient tests. Chavez presents her weather forecast for the launch day of July 26th 2005. Michael Griffin and Wayne Hale answer questions from the news media pertaining to the sensors and launch readiness. The video ends with footage of Pilot Jim Kelly and Commander Eileen Collins conducting test flights in a Shuttle Training Aircraft (STA) that simulates Space Shuttle landing.

  1. The variability in Oxford hip and knee scores in the preoperative period: is there an ideal time to score?

    Quah, C; Holmes, D; Khan, T; Cockshott, S; Lewis, J; Stephen, A

    2018-01-01

    Background All NHS-funded providers are required to collect and report patient-reported outcome measures for hip and knee arthroplasty. Although there are established guidelines for timing such measures following arthroplasty, there are no specific time-points for collection in the preoperative period. The primary aim of this study was to identify whether there was a significant amount of variability in the Oxford hip and knee scores prior to surgical intervention when completed in the outpatient clinic at the time of listing for arthroplasty or when completed at the preoperative assessment clinic. Methods A prospective cohort study of patients listed for primary hip or knee arthroplasty was conducted. Patients were asked to fill in a preoperative Oxford score in the outpatient clinic at the time of listing. They were then invited to fill in the official outcome measures questionnaire at the preoperative assessment clinic. The postoperative Oxford score was then completed when the patient was seen again at their postoperative follow up in clinic. Results Of the total of 109 patients included in this study period, there were 18 (17%) who had a worse score of 4 or more points difference and 43 (39.4%) who had an improvement of 4 or more points difference when the scores were compared between time of listing at the outpatient and at the preoperative assessment clinic. There was a statistically significant difference (P = 0.0054) in the mean Oxford scores. Conclusions The results of our study suggest that there should be standardisation of timing for completing the preoperative patient-reported outcome measures.

  2. Evaluation of the Coreless Linear Conduction Pump for Thermoelectromagnetic Pumps,

    1991-08-01

    pitot -tube type) in the NaK Cart Loop had a range that was not compatible with the pressure head to be developed by the VCLCP. A remotely operated...B.Bleaney, Electricity and Magnetism. 3rd Ed., Oxford Univ. Press 1976. < = > Boeker, Henry G., An Approach to Science. McGraw-Hill, New York 1959

  3. Happiness as stable extraversion : internal consistency reliability and construct validity of the Oxford Happiness Questionnaire among undergraduate students\\ud \\ud

    Robbins, Mandy; Francis, Leslie J.; Edwards, Bethan

    2010-01-01

    The Oxford Happiness Questionnaire (OHQ) was developed by Hills and Argyle (2002) to provide a more accessible equivalent measure of the Oxford Happiness Inventory (OHI). The aim of the present study was to examine the internal consistency reliability, and construct validity of this new instrument alongside the Eysenckian dimensional model of personality. The Oxford Happiness Questionnaire was completed by a sample of 131 undergraduate students together with the abbreviated form of the Revise...

  4. Idealized Compression Ratio for a Screw Briquetting Press

    Peter Biath

    2012-01-01

    Full Text Available This paper deals with issues in determining the ideal compression ratio for a screw briquetting press. First, the principles of operation and a basic description of the main parts of a screw briquetting press are introduced. The next section describes the pressing space by means of 3D software. The pressing space was created using a Boolean subtract function. The final section of the paper measures the partial volumes of the pressing chamber in CATIA V5 by function of measuring. The measured values are substituted into the formula for the compression ratio, and the resulting evaluations are presented in the diagram in the conclusion of this paper.

  5. Properties of hot pressed MgB2/Ti tapes

    Kovac, P.; Husek, I.; Melisek, T.; Fedor, J.; Cambel, V.; Morawski, A.; Kario, A.

    2009-01-01

    Hot axial and hot isostatic pressing was applied for single-core MgB 2 /Ti tapes. Differences in transport current density, n-exponents and critical current anisotropy are discussed and related to the grain connectivity influenced by pressing. The magnetic Hall probe scanning measurements allowed observing the isolated regions for axially hot pressed sample attributed to the longitudinally oriented cracks introduced by pressing. The highest current densities were measured for the tape subjected to hot isostatic pressing due to improved connectivity.

  6. Treatment of the press residues of pressed grapes on an industrial scale

    1978-04-24

    EtOH and tartaric acid are recovered from press residues of grapes by distillation and concentration of the EtOH and extraction of the dried residue after removal of seeds with a mixture of H/sub 2/O and mineral acid. Vegetable oil is extracted from the seeds. Collidal substances are coagulated by roasting prior to extraction of tartaric acid. The grape skins are recovered in flake form.

  7. Press conference of the 15 october 2002; Conference de presse du 15 octobre 2002

    NONE

    2002-10-01

    Facing the public hostile purposes of october 2002, concerning the renewable energies, Andre Antolini, President of the renewable energies syndicate, proposed a press conference to give information, data and realizations on the renewable energies. The text of the conference is presented, as data on employment, biofuels, the wind energy, the hydro-electricity the greenhouse effect fight, the public opinion, the solar heating, the photovoltaic and the future projects and electric power supply for 2010. (A.L.B.)

  8. Hot isostatic press waste option study report

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065

  9. [Work disability in public press professions].

    Akermann, S

    2002-09-01

    In this study more than 1,000 cases of long-term disability among members of the press and media were evaluated. Mental disorders were the main cause of disability in almost every fourth case. In women psychiatric illnesses were even more important. The most common diagnosis was that of a depressive disorder which accounted for more than half of all psychiatric cases. The causes of disability of other insurance systems such as the German social security scheme and the pension and disability plan for the medical profession were compared. Mental illnesses are the leading cause of disability in white collar workers and orthopaedic illnesses, especially disorders of the vertebral column, are the leading cause in blue collar workers, as one might have expected. In females mental disorders are even more common than in men whereas men tend to have more cardiovascular problems than women. In this study also some interesting features regarding disability caused by various illnesses after long-term follow-up were found. This opens unknown perspectives allowing new assessment of diseases and eventually will enable the actuary to price medical diagnoses for disability insurance.

  10. Pressing problems of measurement of ionizing radiations

    Fominykh, V.I.; Yudin, M.F.

    1993-01-01

    The current system for ensuring the unity of measurements in the Russian Federation and countries of the former Soviet Union ensures a high quality of dosimetric, radiometric, and spectrometric measurements in accordance with the recommendations of the Consulative Committee on Standards for Measurements of Ionizing Radiations of the International Bureau of Weights and Measures (IBWM), International Organization on Radiological Units (ICRU), International Commission on Radiological Protection (ICRP), International Organization on Legislative Metrology (IOLM), International Atomic Energy Agency (IAEA), World Health Organization (WHO), etc. Frequent collation of the national primary and secondary standards of Russia with those of IBWM and the leading national laboratories of the world facilitate mutual verification of the measurements of ionizing radiations. The scope of scientific and scientific-technical problems that can be solved by using ionizing radiations has expanded significantly in recent years. In this paper the authors consider some pressing problems of the metrology of ionizing radiations which have arisen as a result of this expansion. These include the need for unity and reliability of measurements involved in radiation protection, the measurement of low doses involving low dose rates, ensuring the unity of measurements when monitoring the radiological security of the population, the need for more uniformity on an international scale regarding the basic physical quantities and their units for characterizing radiation fields, determination of the accuracy of measurement of the radiation dose absorbed by an irradiated tissue or organ, and the development of complex standards for ionizing radiations. 5 refs., 1 tab

  11. Hot isostatic press waste option study report

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065.

  12. Distal clavicular osteolysis in adults: association with bench pressing intensity

    Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B.; Ciccotti, Michael G.

    2016-01-01

    To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p 1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

  13. Americans value happiness but block required policies. Book review of ‘‘The Politics of Happiness; what governments can learn from the new research on well-being’’ by Derek Bok, Princeton University Press, Princeton and Oxford, 2010

    J.C. Ott (Jan Cornelis)

    2012-01-01

    textabstractAbstract In his book ‘‘The Politics of Happiness’’ Derek Bok argues that happiness should be a goal in public policy. He presents an inventory of social problems in the US with negative effects on happiness, like inadequate education, chronic pain, sleep disorders, depressions, divorce,

  14. Steve Clarke, Julian Savulescu, C. A. J. Coady, Alberto Giubilini, and Sagar Sanyal (eds.), The Ethics of Human Enhancement: Understanding the Debate, Oxford University Press, 2016, 269pp., $74.00 (hbk), ISBN 9780198754855.

    Nyholm, S.R.

    2017-01-01

    The Ethics of Human Enhancement: Understanding the Debate has two chief aims. These aims are to help readers understand the existing debate and to move the debate forward. The book consists of an introductory chapter by Alberto Giubilini and Sagar Sanyal (which lays out some prominent

  15. “The Big Three”: Historical Experience of Personal Contacts (Book Review: Costigliola, F. Roosevelt’s Lost Alliances. How Personal Politics Provoked the Cold War [Text] / F. Costigliola. – Princeton and Oxford : Princeton University Press, 2012. – 533 p.

    Irina V. Bystrova

    2018-02-01

    Full Text Available The book of Frank Costigliola is devoted to the role of personal factor in the evolution of relations between the USA, the USSR and Great Britain during World War II. The author used different sources from the archives of the USA, the USSR and Great Britain, first of all, the sources of personal origin, diaries and interviews as well as unpublished memoirs of comrades-in-arms of the leaders of the “Big Three”. The main hero of the book is President of the United States F.D. Roosevelt. The author claimed a rather controversial thesis that it was only Roosevelt who managed to establish very specific relations with Stalin, while opposing Roosevelt’s art of constructing bridges to the behavior of W. Churchill and H. Truman. We are now diminishing really great merits of the US President, but it seems hardly possible to establish some equality between Churchill and Truman. W. Churchill was a kind of liaison unit – a “cement” of the Big Three countries in real practice, for he actively moved from one front to another. Therefore he was the person who established personal contact with I.V. Stalin earlier, than Roosevelt. Special attention is devoted to the activities of a famous American diplomat G. Kennan and his colleagues – American representatives in Moscow during the more prolonged period from 1933 to 1946, i.e. more long-term tendencies in Soviet-American relations, including the informal ones, have been studied. As for the position of foreign ambassadors in the USSR, the author clarifies and studies thoroughly a very bad tendency, on his view, of their “isolation” from the Soviet people. This isolation aggravated the negative image of the Soviet state abroad. The main stages, problems and difficulties of creation of the “Big Three” alliance have been studied in the book. From the point of view of F. Costigliola, unprecedented unity of the leaders of the “Big Three” – F.D. Roosevelt, I.V. Stalin and W. Churchill had been achieved during the war, however, Roosevelt’s death in April 1945 led to the sharp change of course of the new American leadership towards the Cold war.

  16. Zinc coated sheet steel for press hardening

    Ghanbari, Zahra N.

    Galvanized steels are of interest to enhance corrosion resistance of press-hardened steels, but concerns related to liquid metal embrittlement have been raised. The objective of this study was to assess the soak time and temperature conditions relevant to the hot-stamping process during which Zn penetration did or did not occur in galvanized 22MnB5 press-hardening steel. A GleebleRTM 3500 was used to heat treat samples using hold times and temperatures similar to those used in industrial hot-stamping. Deformation at both elevated temperature and room temperature were conducted to assess the coating and substrate behavior related to forming (at high temperature) and service (at room temperature). The extent of alloying between the coating and substrate was assessed on undeformed samples heat treated under similar conditions to the deformed samples. The coating transitioned from an α + Gamma1 composition to an α (bcc Fe-Zn) phase with increased soak time. This transition likely corresponded to a decrease in availability of Zn-rich liquid in the coating during elevated temperature deformation. Penetration of Zn into the substrate sheet in the undeformed condition was not observed for any of the processing conditions examined. The number and depth of cracks in the coating and substrate steel was also measured in the hot-ductility samples. The number of cracks appeared to increase, while the depth of cracks appeared to decrease, with increasing soak time and increasing soak temperature. The crack depth appeared to be minimized in the sample soaked at the highest soak temperature (900 °C) for intermediate and extended soak times (300 s or 600 s). Zn penetration into the substrate steel was observed in the hot-ductility samples soaked at each hold temperature for the shortest soak time (10 s) before being deformed at elevated temperature. Reduction of area and elongation measurements showed that the coated sample soaked at the highest temperature and longest soak time

  17. [CLINICAL APPLICATION OF OXFORD MOBILE-BEARING BIPOLAR PROSTHESIS UNICOMPARTMENTAL KNEE ARTHROPLASTY FOR SINGLE COMPARTMENTAL KNEE OSTEOARTHRITIS].

    Wang, Shangzeng; Cheng, Shao; Wang, Yisheng

    2016-01-01

    To evaluate the effectiveness of Oxford mobile-bearing bipolar prosthesis unicompartmental knee arthroplasty (UKA) in the treatment of single compartmental knee osteoarthritis. Between June 2011 and July 2013, 22 cases of single compartmental knee osteoarthritis were treated by Oxford mobile-bearing bipolar prosthesis UKA. Of 22 cases, 8 were male and 14 were female with an average age of 65 years (range, 45-80 years); the left knee was involved in 12 cases, and the right knee in 10 cases, with a mean disease duration of 32.5 months (range, 8-90 months). The mean weight was 55.2 kg (range, 50-65 kg), and the mean body mass index was 20.8 kg/m2 (range, 17-25 kg/m2). Osteoarthritis involved in the single knee medial compartment in all patients. Knee society score (KSS) and range of motion (ROM) were measured to evaluate the knee joint function. Primary healing of incision was obtained in all patients, and there was no complication of infection, bedsore, or deep venous thrombosis. Postoperative follow-up was 2-4 years (mean, 3.2 years). The X-ray films showed good position of prosthesis, no prosthesis dislocation, or periprosthetic infection during follow-up. Knee ROM, KSS function score, and KSS clinical score were significantly improved at 1 week after operation and at last follow-up when compared with preoperative ones (P 0.05). Oxford mobile-bearing bipolar prosthesis UKA is an effective method to treat single compartmental knee osteoarthritis, with the advantages of less trauma, earlier rehabilitation exercise, near physiological state in joint function, and less risk of complications.

  18. Hot pressing of B4C/SiC composites

    Sahin, F.C.; Turhan, E.; Yesilcubuk, S.A.; Addemir, O.

    2005-01-01

    B 4 C/SiC ceramic composites containing 10-20-30 vol % SiC were prepared by hot pressing method. The effect of SiC addition and hot pressing temperature on sintering behaviour and mechanical properties of hot pressed composites were investigated. Microstructures of hot pressed samples were examined by SEM technique. Three different temperatures (2100 deg. C, 2200 deg. C and 2250 deg. C) were used to optimize hot pressing temperature applying 100 MPa pressure under argon atmosphere during the sintering procedure. The highest relative density of 98.44 % was obtained by hot pressing at 2250 deg. C. However, bending strengths of B 4 C/SiC composite samples were lower than monolithic B 4 C in all experimental conditions. (authors)

  19. Auxiliary equipment and special techniques used for hot isostatic pressing

    Pfeffer, J.B.; Odebo, U.

    1977-01-01

    The largest use for hot isostatic pressing (HIP) in production is in the consolidation of powder. In principle, powder is filled into a capsule of metal or glass, and the capsule is evacuated, sealed and loaded into the hot isostatic press. Consolidation takes place in the hot isostatic press, at which time the consolidated capsule is removed from the press and the encapsulation material is removed from the consolidated powder body. In both densification and defect healing, HIP is carried out without encapsulating the material. This is possible as the materials that lend themselves to HIP healing initially have a high density without communicating pores; therefore, the material acts as its own capsule. Considerations outside of the hot isostatic press that must be taken into account are examined. Information is included on powder manufacture, fabrication of capsules, powder handling, capsule sealing, and loading and unloading the press

  20. High density high-TC ceramic superconductors by hot pressing

    Mak, S.; Chaklader, A.C.D.

    1989-01-01

    High density and high T C superconductor specimens, YBa 2 Cu 3 O x , have been produced by hot-pressing. The factors studied are the effect of hot pressing on the density, the oxygen stoichiometry, the crystal structure, and the critical temperature. Hot pressing followed by heat treatment increased the density of the specimen to 93%. The hot pressing itself did not significantly affect the oxygen content in the specimen, and although the crystal structure appeared to be orthorhombic, the specimens were not superconducting above liquid nitrogen temperature. The superconductivity was restored after head treatment in oxygen. The highest critical temperature (T C ) of the hot pressed pellets was 82K, which was slightly lower than the T C that could be obtained with the cold pressed/sintered pellets. (6 refs., 5 figs., tab.)

  1. Direct drive digital servo press with high parallel control

    Murata, Chikara; Yabe, Jun; Endou, Junichi; Hasegawa, Kiyoshi

    2013-12-01

    Direct drive digital servo press has been developed as the university-industry joint research and development since 1998. On the basis of this result, 4-axes direct drive digital servo press has been developed and in the market on April of 2002. This servo press is composed of 1 slide supported by 4 ball screws and each axis has linearscale measuring the position of each axis with high accuracy less than μm order level. Each axis is controlled independently by servo motor and feedback system. This system can keep high level parallelism and high accuracy even with high eccentric load. Furthermore the 'full stroke full power' is obtained by using ball screws. Using these features, new various types of press forming and stamping have been obtained by development and production. The new stamping and forming methods are introduced and 'manufacturing' need strategy of press forming with high added value and also the future direction of press forming are also introduced.

  2. Muscle activation when performing the chest press and shoulder press on a stable bench vs. a Swiss ball.

    Uribe, Brandon P; Coburn, Jared W; Brown, Lee E; Judelson, Daniel A; Khamoui, Andy V; Nguyen, Diamond

    2010-04-01

    The aim of this study was to examine the effects of a stable surface (bench) vs. an unstable surface (Swiss ball) on muscle activation when performing the dumbbell chest press and shoulder press. Sixteen healthy men (24.19 +/- 2.17 years) performed 1 repetition maximum (1RM) tests for the chest press and shoulder press on a stable surface. A minimum of 48 hours post 1RM, subjects returned to perform 3 consecutive repetitions each of the chest press and shoulder press at 80% 1RM under 4 different randomized conditions (chest press on bench, chest press on Swiss ball, shoulder press on bench, shoulder press on Swiss ball). Electromyography was used to assess muscle activation of the anterior deltoid, pectoralis major, and rectus abdominus. The results revealed no significant difference in muscle activation between surface types for either exercise. This suggests that using an unstable surface neither improves nor impairs muscle activation under the current conditions. Coaches and other practitioners can expect similar muscle activation when using a Swiss ball vs. a bench.

  3. 15x optical zoom and extreme optical image stabilisation: diffraction limited integral field spectroscopy with the Oxford SWIFT spectrograph

    Tecza, Matthias; Thatte, Niranjan; Clarke, Fraser; Lynn, James; Freeman, David; Roberts, Jennifer; Dekany, Richard

    2012-01-01

    When commissioned in November 2008 at the Palomar 200 inch Hale Telescope, the Oxford SWIFT I and z band integral field spectrograph, fed by the adaptive optics system PALAO, provided a wide (3×) range of spatial resolutions: three plate scales of 235 mas, 160 mas, and 80 mas per spaxel over a contiguous field-of-view of 89×44 pixels. Depending on observing conditions and guide star brightness we can choose a seeing limited scale of 235 mas per spaxel, or 160 mas and 80 mas per spaxel for ver...

  4. New reductions of the Astrographic Catalogue. Plate adjustments of the Algiers, Oxford I and II, and Vatican Zones.

    Urban, S. E.; Martin, J. C.; Jackson, E. S.; Corbin, T. E.

    1996-07-01

    The U. S. Naval Observatory is in the process of making new reductions of the Astrographic Catalogue using a modern reference catalog, the ACRS, and new data analysis and reduction software. Currently ten AC zones have been reduced. This papers discusses the reduction models and results from the Algiers, Oxford I and II, and Vatican zones (those of the Cape zone are discussed elsewhere). The resulting star positions will be combined with those of the U.S. Naval Observatory's Twin Astrograph Catalog to produce a catalog of positions and proper motions in support of the Sloan Digital Sky Survey.

  5. Legal Protection To The Infotainment Of Press Development In Indonesia

    Anwar Fuadi

    2015-08-01

    Full Text Available Abstract In the socio-political life the press has become an integral part in democratic life. The press has become one of the means for citizens to bring their thoughts and opinions. Nowadays there is a tendency to increase the quantity of press publications sharp but not accompanied by a statement of the quality of journalism. The objective of this research is to understand the essence of the infotainment liability as a mass media in order to construct a freedom of the press principle which has legitimacy within the legal system of the press in Indonesia. The type of research used in this paper is normative research or also known as doctrinal research by reviewing the legal protection to the infotainment as a mass media in Indonesia. The outcomes of the research indicate that the role of infotainment in the legal system of the press in Indonesia refers to the legal construction of institutional and infotainment organizers itself. Legal liability of Infotainment essentially can be seen from the press obligations stipulated in the Law No. 40 of 1999 regarding the Press Law No. 32 of 2002 regarding Broadcasting as well as the Journalists Code of Ethics which support freedom of the press and expression.

  6. The small academic press in the land of giants

    Frances Pinter

    2015-11-01

    Full Text Available Mergers and acquisitions, for example the merger of Macmillan Science and Education with Springer Science+Business Media, might suggest that large is the future for academic publishing.  It might seem that giant players will dominate the future of scholarly publishing, but, at the same time, this year has seen the launch of UCL Press, the University’s in-house publishing arm. Goldsmiths, University of London, has also announced it is preparing to launch Goldsmiths Press, a new university press built on digital-first publishing, especially around unconventional projects traditionally excluded by publishers. Some of the more established university presses also seem to be increasing their scope. For example, Stanford University Press launched a new trade imprint and Manchester University Press has announced it has acquired forward titles from Bloomsbury Publishing.  'Insights 'asked two experts if there really is scope for the small academic press in the modern scholarly publishing environment. Frances Pinter has provided the perspective of the small university press. She is realistic about the challenges small academic publishers face, but concludes that there is space and opportunity for them to coexist with the giants. Michael Magoulias is equally realistic about the challenges of small, but sees the university press as a necessary, not to say, vital, alternative to commercial publishing.

  7. WordPress all-in-one for dummies

    Sabin-Wilson, Lisa; Palmer, Kevin

    2011-01-01

    A convenient how-to guide for maximizing your WordPress experience. WordPress is a state-of-the-art blog publishing platform with nearly ten million active installations. Eight minibooks provide you with expanded coverage of the most important topics to the WordPress community, such as WordPress basics, theme designs, plug-in development, social media integration, SEO, customization, and running multiple sites. Veteran author Lisa Sabin-Wilson leads an authoritative team of authors who offer their unique knowledge and skillset while sharing invaluable advice for maximizing your site's potentia

  8. 771 Moi Univer

    USER

    2015-09-21

    Sep 21, 2015 ... and landfills, reuse and recycling of solid waste, willingness to pay for waste disposal, and enhanced good rapport ... of air, soil, water, clogging of drains and creation of ... due to lack of knowledge and awareness about SWM.

  9. Effects of pressing temperature and initial microstructure on the equal channel angular pressing of Ti-6Al-4V alloy

    Ko, Y.G.; Lee, Y.H.; Jung, W.S.; Shin, D.H.; Lee, C.S.

    2003-01-01

    The effects of pressing temperature and initial microstructure on the equal channel angular (ECA) pressing of Ti-6Al-4V alloy were investigated in this study. The ECA pressing was carried out isothermally with route C at 500 C, 600 C and 700 C for two typical microstructures, i.e., the Widmanstaetten microstructure and the equiaxed microstructure. The results showed that ECA pressing at 600 C and 700 C was successful without producing any noticeable segment at the specimen surfaces, while a large amount of surface segments were produced at 500 C. After 1 pass pressing at 600 C, the equiaxed microstructure showed more uniform material flow at the surface than the Widmanstaetten microstructure. However, this microstructural influence was diminished with increase of the number of the ECA pressing. A flow-localization parameter that quantifies the flow non-uniform tendency in case of flow softening materials was used to explain the different results in each microstructure. (orig.)

  10. The LNG industry in 2011. Press revue

    2012-05-01

    The outlook of the LNG industry in 2011 is presented as a revue of press articles: The role of LNG as a flexible and secure energy source as well as the prompt response to provide back-up through additional supplies and cargo diversions to compensate for the sudden loss of nuclear capacity in Japan - with sellers exercising due price restraint in view of the human tragedy - has been a credit to the industry. The increase in production capacity in 2009 and 2010, in particular from Qatar, had permitted the necessary buffer to cope much better with the demand surge than during past disruptions (such as the aftermath of the Chuetsu earthquake in late 2007). Undoubtedly, the marked shift over the last decade in the industry's prevailing business model towards global trade, destination flexibility and portfolio play has also facilitated the rapid response. As the total volume of LNG trade is very much determined by the availability of supply, 2011 has seen a growth of 9.4% over 2010, mainly as a result of the full availability of the six Qatar mega-trains over the past year. On the demand side the two traditional basins have shown very contrasting trends: 15% higher LNG off-take in Asia (the five major markets all increasing between 37.4% and 8.9%), versus a 1.7% decrease in the Atlantic Basin. Cargo diversions and an increasing number of reloads have boosted the exports from the Atlantic Basin to Asia in 2011 to more than 14 million tons (equivalent to more than 200 large size cargoes). Remarkable is also the fast growth in new markets in Latin America and in the Middle East - albeit from a small base - with counter-seasonal but varying demand, offering attractive arbitrage opportunities to portfolio play. Not surprising then that 2011 has seen another hike in spot and short-term trade, not just in absolute terms but also as a percentage of total trade (50% over 2010, 25.4% of total trade). The outlook for LNG is strong and its global demand prospects further

  11. Oxford Shoulder Score: A Cross-Cultural Adaptation and Validation Study of the Persian Version in Iran.

    Ebrahimzadeh, Mohammad H; Birjandinejad, Ali; Razi, Shiva; Mardani-Kivi, Mohsen; Reza Kachooei, Amir

    2015-09-01

    Oxford shoulder score is a specific 12-item patient-reported tool for evaluation of patients with inflammatory and degenerative disorders of the shoulder. Since its introduction, it has been translated and culturally adapted in some Western and Eastern countries. The aim of this study was to translate the Oxford Shoulder Score (OSS) in Persian and to test its validity and reliability in Persian speaking population in Iran. One hundred patients with degenerative or inflammatory shoulder problem participated in the survey in 2012. All patients completed the Persian version of OSS, Persian DASH and the SF-36 for testing validity. Randomly, 37 patients filled out the Persian OSS again three days after the initial visit to assess the reliability of the questionnaire. Cronbach's alpha coefficient was 0.93. The intraclass correlation coefficient was 0.93. In terms of validity, there was a significant correlation between the Persian OSS and DASH and SF-36 scores (P Persian version of the OSS proved to be a valid, reliable, and reproducible tool as demonstrated by high Cronbach's alpha and Pearson's correlation coefficients. The Persian transcript of OSS is administrable to Persian speaking patients with shoulder condition and it is understandable by them.

  12. Distal clavicular osteolysis in adults: association with bench pressing intensity

    Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Musculoskeletal Imaging and Interventions, Department of Radiology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Ciccotti, Michael G. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Sports Medicine, Department of Orthopedic Surgery, Thomas Jefferson University Hospital, Rothman Institute, Philadelphia, PA (United States)

    2016-11-15

    To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p < 0.001). Low-intensity bench pressing (1RM less than 1.5 times the body weight) was not a risk factor for DCO (OR = 0.6; 95 % CI = 0.4-0.8). High frequency (>1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

  13. Press touch code: A finger press based screen size independent authentication scheme for smart devices

    Ranak, M. S. A. Noman; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z.

    2017-01-01

    Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)—a.k.a., Force Touch in Apple’s MacBook, Apple Watch, ZTE’s Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on—is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme. PMID:29084262

  14. Press touch code: A finger press based screen size independent authentication scheme for smart devices.

    Ranak, M S A Noman; Azad, Saiful; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z

    2017-01-01

    Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.

  15. Densification of boron carbide at relatively low temperatures by hot pressing and hot isostatic pressing

    Telle, R.

    1988-01-01

    The poor sinterability of B 4 C limits its widespread application because both high temperatures and high pressures are required for a complete densification. Moreover, B 4 C suffers from a low strength and fracture toughness, possesses, however, a high potential because of its extreme hardness. Reaction hot pressing of B 4 C-WC-TiC-Si-Co mixtures resulting in B 4 C-TiB 2 -W 2 B 5 composites of high density exhibit remarkable mechanical properties. The influence of hot isostatic pressing (HIP) on the microstructure and the mechanical properties is investigated in cooperation with participants of the COST 503 activities and related to the strengthening and toughening mechanisms. Difficulties during densification by HIP arise from the evaporation of adsorbed volatiles as well as from the strong swelling of the powder compact due to the sintering reaction. Several HIP cycle designs were tested in order to prevent the bloating of the capsule and to control internal stresses due to the misfit of the thermal expansion of the entire phases. In comparison to single phase B 4 C ceramics, bending strength was improved to 1030 MPa, K Ic to 5.2 MPa/m, while hardness was comparable with HV1=38 GPa. Wear test were performed and related to the toughening mechanisms. (orig.) With 56 refs., 9 tabs., 64 figs

  16. Press touch code: A finger press based screen size independent authentication scheme for smart devices.

    M S A Noman Ranak

    Full Text Available Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC. We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.

  17. A content analysis of the UK press response to the diagnosis of Ebola in a British healthcare worker.

    Hobbs, Constance; Myles, Puja; Pritchard, Catherine

    2017-12-01

    The Ebola epidemic led to considerable media attention, which may influence public risk perception. Therefore, this study analysed the UK press response following diagnosis of a British healthcare worker (HCW) with Ebola. Using the Nexis database, the frequency of Ebola-related articles in UK national newspaper articles was mapped. This was followed by a content analysis of Ebola-related articles in the four newspapers with highest UK net readership from November 2014 to February 2015. During the 16-week study period, 1349 articles were found. The day with the highest number of Ebola-related articles was 31 December 2014, the day after the diagnosis of Ebola in a UK HCW. Seventy-seven articles were included in the content analysis. Content analysis demonstrated a shift from West African to UK-focused articles, increased discussion of border control, UK policy decisions and criticism, and an increased number of articles with a reassuring/threatening message. UK press coverage of Ebola increased following a HCW's diagnosis, particularly regarding discussion of screening measures. This is likely to have increased risk perception of Ebola in the UK population and may have contributed to subsequent strengthening of UK screening policy beyond World Health Organisation requirements. © The Author 2016. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  18. Atlas of hot isostatic beryllium powder pressing diagrams

    Stoev, P.I.; Papirov, I.I.; Tikhinskij, G.F.; Vasil'ev, A.A.

    1995-01-01

    Diagrams of hot isotopic pressing (HIP) of beryllium powder with different grain size in a wide range of pressing parameters are built by mathematical modeling methods. The HIP diagrams presented are divided into 3 groups: parametric dependencies D=f(P,T); technological HIP diagrams; compacting mechanisms. The created data bank permits to optimise beryllium powder HIP with changing parameters. 4 refs., 23 figs

  19. Simulation Model of Automated Peat Briquetting Press Drive

    A. A. Marozka

    2012-01-01

    Full Text Available The paper presents the developed fully functional simulation model of an automated peat briquetting press drive. The given model makes it possible to reduce financial and time costs while developing, designing and operating a double-stamp peat briquetting press drive.

  20. Criticism of the Press: Its Social, Psychological and Political Origins.

    Becker, Lee B.; And Others

    This study examines data from several national polls about press coverage during the Watergate scandal, in order to assess the origins of press criticism. The polls were conducted between 28 September and 6 October 1973, during June 1974, and in August 1974. The data suggest that political variables--particularly support of Nixon, party…

  1. Design, manufacture and performance research of double acting hydraulic press

    Koc, Erdem; Unver, Ertu; Ozturk, Hidayet

    1990-01-01

    This research presents the design and production of a double acting 40 tons capacity hydraulic press. The issues in the design, engineering manufacturing of the hydraulic press are reported specifically on both cylinders generating the same pressure and velocity using a solenoid directional control valve and a flow separating valve. (In Turkish)

  2. New Realities for Scholarly Presses in Trying Economic Times

    Blakesley, David

    2014-01-01

    The author explains that Parlor Press is an independent publisher and distributor of scholarly and trade books in print and digital formats. It was founded in 2002 to address the need for an alternative scholarly, academic press attentive to emergent ideas and forms while maintaining the highest possible standards of quality, credibility, and…

  3. Ecology and ranging behaviour of Red foxes in the city of Oxford / Ecologia e comportamento della volpe (Vulpes vulpes nella città di Oxford

    C. Patrick Doncaster

    1991-07-01

    Full Text Available Abstract Red foxes (Vulpes vulpes living in the city of Oxford, like those in its neighbouring suburbs, are organized into social groups which each defend a territory. While territories in the suburbs are spatially stable, those in the city continually drift in location. They move in synchrony with their neighbours and the prevailing pattern is a honeycomb of group ranges of relatively small but constant size. The city environment is characterized by a high level of disturbance, which may favour range mobility, and by a patchy and highly divided mosaic of habitats. A quantification of patch density leads us to propose an explanation for the small size of territories and the existence of more adults than a single pair, in terms of the dispersion of habitat patches and competition for food resources contained therein. Riassunto Le popolazioni di Volpe (Vulpes vulpes insediate nella città di Oxford e nelle aree suburbane limitrofe sono organizzate in gruppi sociali che difendono un proprio territorio. Mentre i territori nelle aree suburbane sono spazialmente stabili, quelli presenti in città cambiano continuamente posizione. Questi ultimi si muovono sincronicamente con quelli limitrofi e la disposizione prevalente è simile al favo delle api con territori relativamente piccoli, ma di dimensioni costanti. L'ambiente cittadino è caratterizzato da elevato disturbo, che può favorire la mobilita dei territori, e da un mosaico molto vario di ambienti. La presenza di territori di ridotte dimensioni occupati da più adulti e non da una singola coppia di volpi sembra dipendere dall'alternanza e variabilità degli ambienti e dalla competizione per le risorse alimentari.

  4. News from the Library: PressDisplay on mobile devices!

    CERN Library

    2013-01-01

    You are probably already using PressDisplay to read newspapers online, but for those of you who are not yet aware of this service, PressDisplay is an online portal where you can browse and read online articles from more than 1,900 newspapers from 95 countries, as soon as they are published.   Whether you are an experienced user or a beginner, we have good news concerning PressDisplay: our license now permits you to download complete newspaper issues to your mobile devices and read them offline wherever you like. To do that, you have to use the mobile app PressReader. Instructions on how to install the PressReader app are available here: For Ipad For Android smartphone For Android tablet For Windows 8 devices For BlackBerry Playbook For Android eReader Your feedback is welcome! Please contact us by e-mail.

  5. Predictor of regulation of uranium dioxide powder pressing process

    Motta, Eduardo Souza; Araujo, Victor Hugo Leal de; Bernardelli, Sergio Henrique

    2007-01-01

    One of the most important steps of the uranium dioxide pellets fabrication used in the nuclear fuel elements is the green pellets pressing. The target density of the pellets after the sintering process determines the density of the green pellet. To meet the same sintered target density the green density may vary according to the powder characteristics. These variations implies in changing the regulation of the press for different powder's patches. The regulation done empirically imply in productivity loss and necessity of reprocessing the pellets pressed during the press regulation and also depends on the operator experience. At this work, was developed an artificial neural network feed forward back propagation to predict the press regulation, depending on the powder characteristics and the green pellet's target density. The results obtained at INB - Industrias Nucleares do Brasil S. A. during the fabrication of the fifth recharge of Angra II nuclear power plant are presented. (author)

  6. Up to 10-year follow-up of the Oxford medial partial knee arthroplasty - 695 cases from a single institution

    Wagner Kristensen, Per; Holm, Henriette A; Varnum, Claus

    2013-01-01

    Partial knee arthroplasty (PKA) has shown obvious advantages compared to total knee arthroplasty, but survival of PKA from different institutions and registries has differed. In our institution, 695 consecutive Oxford medial PKAs were performed from 2002 to 2011 with mean follow-up of 4.6 years....... The overall 10.7-year survival rate was 85.3% (95% CI: 78.7%-90.0%), and no difference in survival for gender and age younger or older than 60 years was found. One year after PKA, 94.3% were very satisfied or satisfied, as were 93.6% six years postoperatively. The revision rate was 7.3% (n=51), and the most...

  7. Oxford Knee Score: cross-cultural adaptation and validation of the Turkish version in patients with osteoarthritis of the knee.

    Tuğay, Baki Umut; Tuğay, Nazan; Güney, Hande; Kınıklı, Gizem İrem; Yüksel, İnci; Atilla, Bülent

    2016-01-01

    The Oxford Knee Score (OKS) is a valid, short, self-administered, and site- specific outcome measure specifically developed for patients with knee arthroplasty. This study aimed to cross-culturally adapt and validate the OKS to be used in Turkish-speaking patients with osteoarthritis of the knee. The OKS was translated and culturally adapted according to the guidelines in the literature. Ninety-one patients (mean age: 55.89±7.85 years) with knee osteoarthritis participated in the study. Patients completed the Turkish version of the Oxford Knee Score (OKS-TR), Short-Form 36 Health Survey (SF-36), and Western Ontario and McMaster Universities Index (WOMAC) questionnaires. Internal consistency was tested using Cronbach's α coefficient. Patients completed the OKS-TR questionnaire twice in 7 days to determine the reproducibility. Correlation between the total results of both tests was determined by Spearman's correlation coefficient and intraclass correlation coefficients (ICC). Validity was assessed by calculating Spearman's correlation coefficient between the OKS, WOMAC, and SF-36 scores. Floor and ceiling effects were analyzed. Internal consistency was high (Cronbach's α: 0.90). The reproducibility tested by 2 different methods showed no significant difference (p>0.05). The construct validity analyses showed a significant correlation between the OKS and the other scores (p<0.05). There was no floor or ceiling effect in total OKS score. The OKS-TR is a reliable and valid measure for the self-assessment of pain and function in Turkish-speaking patients with osteoarthritis of the knee.

  8. Dynamic RSA for the evaluation of inducible micromotion of Oxford UKA during step-up and step-down motion.

    Horsager, Kristian; Kaptein, Bart L; Rømer, Lone; Jørgensen, Peter B; Stilling, Maiken

    2017-06-01

    Background and purpose - Implant inducible micromotions have been suggested to reflect the quality of the fixation interface. We investigated the usability of dynamic RSA for evaluation of inducible micromotions of the Oxford Unicompartmental Knee Arthroplasty (UKA) tibial component, and evaluated factors that have been suggested to compromise the fixation, such as fixation method, component alignment, and radiolucent lines (RLLs). Patients and methods - 15 patients (12 men) with a mean age of 69 (55-86) years, with an Oxford UKA (7 cemented), were studied after a mean time in situ of 4.4 (3.6-5.1) years. 4 had tibial RLLs. Each patient was recorded with dynamic RSA (10 frames/second) during a step-up/step-down motion. Inducible micromotions were calculated for the tibial component with respect to the tibia bone. Postoperative component alignment was measured with model-based RSA and RLLs were measured on screened radiographs. Results - All tibial components showed inducible micromotions as a function of the step-cycle motion with a mean subsidence of up to -0.06 mm (95% CI: -0.10 to -0.03). Tibial component inducible micromotions were similar for cemented fixation and cementless fixation. Patients with tibial RLLs had 0.5° (95% CI: 0.18-0.81) greater inducible medio-lateral tilt of the tibial component. There was a correlation between postoperative posterior slope of the tibial plateau and inducible anterior-posterior tilt. Interpretation - All patients had inducible micromotions of the tibial component during step-cycle motion. RLLs and a high posterior slope increased the magnitude of inducible micromotions. This suggests that dynamic RSA is a valuable clinical tool for the evaluation of functional implant fixation.

  9. Ranking current and prospective NO2 pollution mitigation strategies: An environmental and economic modelling investigation in Oxford Street, London.

    Jeanjean, A P R; Gallagher, J; Monks, P S; Leigh, R J

    2017-06-01

    Air pollution continues to be a problem in the urban environment. A range of different pollutant mitigation strategies that promote dispersion and deposition exist, but there is little evidence with respect to their comparative performance from both an environmental and economic perspective. This paper focuses on examining different NO 2 mitigation strategies such as trees, buildings facades coated with photocatalytic paint and solid barriers in Oxford Street in London. The case study findings will support ranking the environmental and economic impacts of these different strategies to improve personal exposure conditions on the footpath and on the road in a real urban street canyon. CFD simulations of airflow and NO 2 dispersion in Oxford Street in London were undertaken using the OpenFOAM software platform with the k-ε model, taking into account local prevailing wind conditions. Trees are shown to be the most cost-effective strategy, with a small reduction in NO 2 concentrations of up to 0.7% on the road. However, solid barriers with and without the application of photocatalytic paint and an innovative material (20 times more expensive than trees) can improve air quality on the footpaths more substantially, up to 7.4%, yet this has a significant detrimental impact on NO 2 concentrations (≤23.8%) on the road. Photocatalytic paint on building surfaces presented a minimal environmental reductions (1.2%) and economic (>100 times more expensive than trees) mitigation strategy. The findings recognised the differences between footpath and road concentrations occurred and that a focused examination of three pollution hotspots can provide more cost effective pollution mitigation. This study considers how a number of pollutant mitigation measures can be applied in a single street canyon and demonstrates the strengths and weaknesses of these strategies from economic and environmental perspectives. Further research is required to extrapolate the findings presented here to

  10. How to press-release and take care of expression in articles at press side

    Hamamoto, Kazuko; Narabayashi, Tadashi; Kobayashi, Masahide; Akizuki, Teruo; Onishi, Hidetoshi

    2008-01-01

    As for the influences of Chuetsu-Oki Earthquake on Kashiwazaki-Kariwa Nuclear Power Station, we can conclude that 'the safety function of the nuclear power station, that is, 'Shutdown', 'Cooling down' and 'Isolating' functioned as per designed even against earthquake beyond assumption, and fundamental nuclear safety could be assured'. Nevertheless, it is said that one of the causes that harmful rumor had spread was due to mass communication media. In the press reports on some nuclear power station when affected by an earthquake and on trouble in the nuclear power station in the future, we will propose that the publication should be really useful for habitants and citizens and be promoted in the positive and expected direction, in order not to make the same mistake as this time. JSME should aim at implement the above-mentioned proposal under cooperation with other academic societies and organizations. (author)

  11. Men exhibit greater fatigue resistance than women in alternated bench press and leg press exercises.

    Monteiro, Estêvão R; Steele, James; Novaes, Jefferson S; Brown, Amanda F; Cavanaugh, Mark T; Vingren, Jakob L; Behm, David G

    2017-11-17

    The purpose of this study was to evaluate the influence of sex, exercise order, and rest interval on neuromuscular fatigue resistance for an alternated strength training sequence of bench press (BP) and leg press (LP) exercises. Twelve women and 16 men, both recreationally trained, performed four sessions in a random order: 1) BP followed by LP with three-minutes rest (BP+LP with rest), 2) LP followed by BP with three-minutes rest (LP+BP with rest), 3) BP followed by LP without rest interval (BP+LP no rest), and 4) LP followed by BP without rest interval (LP+BP no rest). Participants performed four sets with 100% of 10RM load to concentric failure with the goal of completing the maximum number of repetitions in both exercises. The fatigue index was analyzed from the first and last sets of each exercise bout. A main effect for sex showed that women exhibited 25.5% (p=0.001) and 24.5% (p=0.001) greater BP and LP fatigue than men respectively when performing 10RM. Men exhibited greater BP (p<0.0001; 34.1%) and LP (p<0.0001; 30.5%) fatigue resistance when a rest period was provided. Men did not show an exercise order effect for BP fatigue and exhibited greater (p=0.0003; 14.5%) LP fatigue resistance when BP was performed first. The present study demonstrated the greater fatigue resistance of men when performing 10RM BP and LP exercises. Since men tend to experience less fatigue with the second exercise in the exercise pairing, women's training programs should be adjusted to ensure they do not parallel men's resistance training programs.

  12. Roy Ellen, Stephen J. Lycett, Sarah E. Johns, eds., 2013, Understanding Cultural Transmission in Anthropology: A Critical Synthesis New York and Oxford: Berghahn Books

    Clelia Viecelli

    2015-10-01

    Full Text Available recensione: Roy Ellen, Stephen J. Lycett, Sarah E. Johns, eds., 2013, Understanding Cultural Transmission in Anthropology: A Critical Synthesis New York and Oxford: Berghahn Books di Clelia Viecelli

  13. A superconducting solenoid and press for permanent magnet fabrication

    Mulcahy, T. M.; Hull, J. R.

    2002-01-01

    For the first time, a superconducting solenoid (SCM) was used to increase the remnant magnetization of sintered NdFeB permanent magnets (PMs). In particular, improved magnetic alignment of commercial-grade PM powder was achieved, as it was axial die pressed into 12.7-mm diameter cylindrical compacts in the 76.2-mm warm bore of a 9-T SCM. The press used to compact the powder is unique and was specifically designed for use with the SCM. Although the press was operated in the batch mode for this proof of concept study, its design is intended to enable automated production. In operation, a simple die and punch set made of nonmagnetic materials was filled with powder and loaded into a nonmagnetic press tube. The cantilevered press tube was inserted horizontally, on a carrier manually advanced along a track, into the SCM. The robustness of the mechanical components and the SCM, in its liquid helium dewar, were specifically designed to allow for insertion and extraction of the magnetic powder and compacts, while operating at 9 T. Compaction was achieved by pressing the punches between the closed end of the press tube and the hydraulic cylinder mounted on the opposite end. Improvements up to 10% in magnetization and 20% in energy products of the permanent magnets were obtained, as the alignment fields were increased above the 2-T maximum field of the electromagnets used in industry. Increases in magnetization of 3% are significant in the mature sintered magnet industry

  14. Jatropha press cake as organic fertilizer in lettuce cultivation

    José R. Mantovani

    Full Text Available ABSTRACT In biodiesel production, vegetable press cake is obtained as waste, and a suitable destination for jatropha press cake would be the use in agriculture as organic fertilizer. This study aimed to evaluate the effect of jatropha press cake on soil fertility attributes and on lettuce production and accumulation of nutrients in the shoots. The experiment was conducted in pots in a greenhouse, in a randomized block design with eight treatments and five replicates. The treatments consisted of doses of jatropha press cake equivalent to 0, 0.5, 1.0, 2.0, 4.0, 8.0, 16.0 and 32.0 t ha-1. Portions of 5.5 dm3 of soil received limestone, phosphate fertilizer and the doses of jatropha press cake, and remained incubated for 30 days. After incubation, soil samples were collected, each pot received one lettuce seedling and the experiment was carried out for 45 days. The organic fertilization with jatropha press cake increased the contents of nutrients in the soil, especially K+, but caused increment in soil acidity and electrical conductivity. The use of jatropha press cake as organic fertilizer decreased lettuce production and accumulation of nutrients in the shoots.

  15. Internal consistency, reliability, and temporal stability of the Oxford Happiness Questionnaire short-form: Test-retest data over two weeks

    MCGUCKIN, CONOR

    2006-01-01

    PUBLISHED The Oxford Happiness Questionnaire short-form is a recently developed eight-item measure of happiness. This study evaluated the internal consistency reliability and test-retest reliability of the Oxford Happiness Questionnaire short-form among 55 Northern Irish undergraduate university students who completed the measure on two occasions separated by two weeks. Internal consistency of the measure on both occasions was satisfactory at both Time 1 (alpha = .62) and Time 2 (alpha = ....

  16. Tradurre nel contesto pluriglosso dell'arabo con l'aiuto di un nuovo dizionario bilingue. Riflessioni sull'Oxford Arabic Dictionary.

    Claudia Maria Tresso

    2014-12-01

    Full Text Available Translating in the Arabic Plurilingual Context with the Help of a New Bilingual Dictionary. Some remarks on the Oxford Arabic Dictionary. A bilingual dictionary from English, the International language for communication, to Arabic nowadays represents one of the major challenges in the fields of translation studies and teaching. The Oxford Arabic Dictionary, with is corpus-based word list represents a good point of departure for future lexicographical works and for the development of teaching of Modern Standard Arabic.

  17. Mannes of Forging and Perspectives of Knuckle Joint Presses Modernization

    A. A. Antsifirov

    2014-01-01

    Full Text Available The article raises an issue to enhance technological forging capabilities on the known knuckle joint presses. It provides an illustrated overview of main design types of presses with crank-knuckle, toggle-knuckle, and knuckle joint mechanisms. The article also shows the advantages of the modernization way and improvement just of the active press equipment in terms of quality-to-price ratio, for example, as compared to the similar new foreign press equipment.It gives an overview of features, which provide forging processes owing to kinetic energy accumulated with the moving parts of the known designs of the knuckle joint presses depending on the drive actuating mechanism. Focused attention is drawn to forging on the knuckle joint presses for a time of contact with a work piece to be comparable with the duration of the work piece deformation process on hydraulic forging hammers. This allows us to forge thin-wall products with process automation compared to the forging hammers.Analysis of accumulating processes of kinetic energy by the moving parts of the knuckle joint presses has shown that presses driven by hydraulic cylinders or two screw hydraulic cylinder are the most optimal for technological operations as evidenced by references to domestic and foreign invention certificates and patents. The article presents disadvantages of forging on presses with hydraulic or pneumatic drive. It is a dependence of the deformation force, caused, mainly, by a force of the drive cylinder. The article gives linear movement rate quantities of press moving members depending on the drives of the actuating mechanism. Based on the above analysis of the features to manufacture work pieces on the knuckle joint presses, the article gives the rationale for the relevance of forging in a short period of time, provided that the moving parts of the press accumulate the required kinetic energy. This can be achieved only through modernization and improvement of forging

  18. Press problem related to nuclear energy news reporting

    Arai, Mitsuo

    2008-01-01

    Since the event of Niigataken Chuetsu-oki Earthquake in 2007 and the subsequent press reports on damage of nuclear power station after it, a stance of media is being questioned. In order to clear this problem, basic organizational structure of the press related to nuclear energy news was analyzed. Local news department, social news department, science news department and economical news department involve in nuclear energy news the accordance with their own situations and concerns. This structure makes problem of nuclear energy news reporting complicated. Changing this system is required but very difficult. It is concluded that the press problem around nuclear energy news is strange. (author)

  19. A strategy for improving public confidence of nuclear energy based on the segmentation of stake holders -Focused on Univ. Students, the Opinion Leader in the Next Generation-

    Jang, Jenam

    2012-01-01

    Korea Nuclear Energy Promotion Agency(hereafter, referred as KONEPA) is a public institution established in March, 1992 to improve correct understanding of nuclear energy through development and dissemination of objective, scientific knowledge on the peaceful use of nuclear energy. KONEPA divided the targeted group into four large groups? opinion leaders, civil-social group, LOCA governments, general public/next-generation students/teachers? according to the knowledge levels of nuclear power and involvements in nuclear power plants, and implemented 'customized strategy' suited to the own characteristic of each group. Of these four groups, the next generation, focused on the 'Univ. students' will be discussed with their activities and future plans in this paper

  20. 16 December 2013 - Hooke Professor of Experimental Physics and Pro Vice Chancellor University of Oxford Prof. I. Walmsley visiting the ATLAS cavern with ATLAS Collaboration Deputy Spokesperson T. Wengler, Physics Department, ATLAS Collaboration P. Wells and Chair, CMS Collaboration Board, Oxford University and Purdue University I. Shipsey

    Anna Pantelia

    2013-01-01

    16 December 2013 - Hooke Professor of Experimental Physics and Pro Vice Chancellor University of Oxford Prof. I. Walmsley visiting the ATLAS cavern with ATLAS Collaboration Deputy Spokesperson T. Wengler, Physics Department, ATLAS Collaboration P. Wells and Chair, CMS Collaboration Board, Oxford University and Purdue University I. Shipsey

  1. Concept Design of Movable Beam of Hydraulic Press

    Li Yancong

    2017-01-01

    Full Text Available The hydraulic press movable beam is one of the key components of the hydraulic press; its design quality impacts the accuracy of the workpiece that the press suppressed. In this paper, first, with maximum deflection and material strength as constraints, mechanical model of the movable beam is established; next, the concept design model of the moveable beam structure is established; the relationship among the force of the side cylinder, the thickness of the inclined plate, outer plate is established also. Taking movable beam of the 100MN type THP10-10000 isothermal forging hydraulic press as an example, the conceptual design result is given. This concept design method mentoned in the paper has general meaning and can apply to other similar product design.

  2. Fabrication and properties of hot pressed bismuth tungstate

    Streicher, W.L.

    1978-01-01

    Bi 2 WO 6 is a synthetic polar material that is a possible candidate for energy conversion and detection systems. Previous research on this material has been concerned with crystal growth and sintering characteristics of polycrystalline compacts. This study involves itself with the fabrication of polycrystalline compacts by hot pressing techniques. Densities approaching theoretical crystal density were achieved by hot pressing at 850 0 C for one hour with pressures exceeding 35 MPa. Before hot pressing, the sintering range was determined by high temperature dilatometry of unfired Bi 2 WO 6 ceramics. Hot pressed discs were characterized by scanning electron microscopy, differential scanning calorimetry, and x-ray diffraction. Electrical properties were determined by dc resistivity, capacitance, and conductance measurements, ac poling, dc poling, and current-voltage measurements

  3. Pleurotus pulmonarius cultivation on amended palm press fibre waste

    Bola

    2015-05-13

    May 13, 2015 ... Seven different substrates (A to G) were prepared from saw dust, palm press ... can grow in a wide range of soil types with relatively low ..... documented to include; cotton waste, sugar cane ..... Canada wood ash sources. Can.

  4. Poland's Press and Broadcasting Under the Gierek Regime

    Shanor, Donald R.

    1974-01-01

    Reports that the Polish press and broadcasting have been carrying more news and less propaganda since the 1970 Baltic upheavel and that the Polish media are generally allowed more freedom than media in other Communist nations. (RB)

  5. Press releases — the new trend in science communication

    Autzen, Charlotte

    2014-01-01

    Scientific institutions have for a long time known the importance of framing and owning stories about science They also know the effective way of communicating science in a press release This is part of the institution’s public relations. Enhanced competition among research institutions has led...... to a buildup of communicative competences and professionalization of public relations inside the institutions and the press release has become an integrated part of science communication from these institutions. Changing working conditions in the media, where fewer people have to publish more, have made press...... releases from trustworthy scientific institutions into free and easily copied content for the editors. In this commentary I investigate and discuss the communicative ecosystem of the university press release. I especially take a close look at the role of the critical and independent science journalist...

  6. Cars & Censorship: How Advertising Pressure Can Corrupt a Free Press.

    Collins, Ronald K. L.

    1992-01-01

    Discusses "private censorship" as it relates to car dealers and television advertising. Defines "private censorship" as that which occurs when a broadcaster suppresses or alters a news story that affects commercial clients (advertisers). Makes recommendations for a freer press. (JOW)

  7. Modelling of powder die compaction for press cycle optimization

    Bayle Jean-Philippe

    2016-01-01

    Full Text Available A new electromechanical press for fuel pellet manufacturing was built last year in partnership between CEA-Marcoule and ChampalleAlcen. This press was developed to shape pellets in a hot cell via remote handling. It has been qualified to show its robustness and to optimize the compaction cycle, thus obtaining a better sintered pellet profile and limiting damage. We will show you how 400 annular pellets have been produced with good geometry's parameters, based on press settings management. These results are according to a good phenomenological pressing knowledge with Finite Element Modeling calculation. Therefore, during die pressing, a modification in the punch displacement sequence induces fluctuation in the axial distribution of frictional forces. The green pellet stress and density gradients are based on these frictional forces between powder and tool, and between grains in the powder, influencing the shape of the pellet after sintering. The pellet shape and diameter tolerances must be minimized to avoid the need for grinding operations. To find the best parameters for the press settings, which enable optimization, FEM calculations were used and different compaction models compared to give the best calculation/physical trial comparisons. These simulations were then used to predict the impact of different parameters when there is a change in the type of powder and the pellet size, or when the behavior of the press changes during the compaction time. In 2016, it is planned to set up the press in a glove box for UO2 manufacturing qualification based on our simulation methodology, before actual hot cell trials in the future.

  8. Dynamic Multiaxial Response of a Hot-Pressed Aluminum Nitride

    2012-01-05

    Hutchinson, Adv. Appl . Mech. 29 (1992). [34] H. Ming-Yuan, J.W. Hutchinson, Int. J. Solids Struct. 25 (1989) 1053. [35] J. Salem , L. Ghosn, Int. J...Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride by Guangli Hu, C. Q. Chen, K. T. Ramesh, and J. W. McCauley ARL-RP-0487...Laboratory Aberdeen Proving Ground, MD 21005-5066 ARL-RP-0487 June 2014 Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride

  9. Speech freedom and press freedom in human security in Rwanda

    Niyonzima, Oswald

    2014-01-01

    Treball Final de Màster Universitari Internacional en Estudis de Pau, Conflictes i Desenvolupament. Codi: SAA074. Curs: 2013/2014 Freedom of speech and press freedom are key foundations of all human rights as stipulated in human rights declaration of 1948. Denying people the right to free speech is keeping them away from what is happening in this world, thus, hindering them from participating in decision making. While speech freedom and press freedom are key tools to measure if a country ...

  10. PRESS: A Novel Framework of Trajectory Compression in Road Networks

    Song, Renchu; Sun, Weiwei; Zheng, Baihua; Zheng, Yu

    2014-01-01

    Location data becomes more and more important. In this paper, we focus on the trajectory data, and propose a new framework, namely PRESS (Paralleled Road-Network-Based Trajectory Compression), to effectively compress trajectory data under road network constraints. Different from existing work, PRESS proposes a novel representation for trajectories to separate the spatial representation of a trajectory from the temporal representation, and proposes a Hybrid Spatial Compression (HSC) algorithm ...

  11. Corporate social responsibility's discourse in lithuanian business press

    Marčenkovas, Marius

    2014-01-01

    The object of this master work is corporate social responsibility's (CSR) discourse. The purpose of this work is to analyze how Lithuanian business press presents CSR topic. The main tasks to reach this purpose are: overview and compare CSR definitions; analyze media impact to CSR; analyze and summarize CSR discourse in Lithuanian business press. Literature analysis, synthesis and comparative methods were used to drawn conclusions. After the literature analysis of such scientists as Ph. Kotle...

  12. Trends in hospital admission rates for anorexia nervosa in Oxford (1968-2011) and England (1990-2011): database studies.

    Holland, Josephine; Hall, Nick; Yeates, David G R; Goldacre, Michael

    2016-02-01

    To report on long-term trends in hospital admission rates for anorexia nervosa using two English datasets. We used data on hospital day-case and inpatient care across five decades in the Oxford Record Linkage Study (ORLS), and similar data for all England from 1990. We analysed rates of admission for anorexia nervosa in people aged 10-44 years, using hospital episodes (counting every admission) and first-recorded admissions (counting only the first record for each person). Former Oxford NHS Region; and England. None; anonymous statistical records were used. In the longstanding ORLS, the age-standardised first-recorded admission rate for women was 2.7 (95% confidence interval 1.6-3.8) per 100,000 female population aged 10-44 years in 1968-1971; 2.7 (2.1-3.3) in 1992-1996; and 6.3 (5.5-7.2) in 2007-2011. Male rates were zero in the 1960s; 0.07 (0.0-0.1) per 100,000 men in 1992-1996; and 0.4 (0.2-0.6) in 2007-2011. In England, female rates increased from 4.2 (4.0-4.4) in 1998-2001 to 6.9 (6.7-7.1) in 2007-2011; and the corresponding male rates were 0.2 (0.1-0.3) and 0.5 (0.4-0.6). Episode-based admission rates rose more than person-based rates. The highest rates by far were in girls and women aged 15-19 years. In recent years, anorexia nervosa has become a greater burden on secondary care: not only have admission rates increased but so too have multiple admissions per person with anorexia nervosa. The increase in admission rates might reflect an increase in prevalence rates of anorexia nervosa in the general population, but other explanations, including lower clinical thresholds for admission, are possible and are discussed. © The Royal Society of Medicine.

  13. Resident-performed Ex-PRESS shunt implantation versus trabeculectomy.

    Seider, Michael I; Rofagha, Soraya; Lin, Shan C; Stamper, Robert L

    2012-09-01

    To compare outcomes between resident-performed trabeculectomy and Ex-PRESS shunt implantation. A consecutive cohort of 36 Ex-PRESS shunt implantations and 57 trabeculectomies (1 eye/patient) performed by resident surgeons in their third year of ophthalmic training at the University of California, San Francisco and at the San Francisco Veterans Administration Hospital, under the supervision of a single glaucoma fellowship-trained surgeon were included in this study. Eyes with PRESS shunt groups at all follow-up points. On average, the Ex-PRESS shunt group required significantly less ocular antihypertensive medication to control IOP at 3 months postoperative (P=0.01), but no difference was found at 6 months or 1 year (all, P≥0.28). A larger proportion of Ex-PRESS shunt patients had good IOP control without medication at 3 (P=0.057) and 6 months (P=0.076) postoperatively. No difference was found in the rates of sight-threatening complications between groups (all, P≥0.22). In the hands of ophthalmology residents in their third year of training, the trabeculectomy and Ex-PRESS shunt implantation procedures perform comparably in terms of postoperative IOP control, reduction in patient dependence on ocular antihypertensive medications, and risk of complication in our population.

  14. A review of initiatives to reduce energy-related CO2 emissions from the city of Oxford: past, present and future

    Gupta, Rajat

    2007-01-01

    This paper reviews three key initiatives undertaken in the historical city of Oxford to bring about reductions in energy-related CO 2 emissions on a city-wide scale. The author has been part of all the three initiatives. In 2002, a collaborative partnership between academia, industry and city council started the Oxford Solar Initiative (OSI) which uses a community-based approach to help households and organisations in Oxford, financially and technically, to install solar energy systems and energy efficiency measures in buildings. So far OSI has facilitated the installation of 80 active solar systems, over 450 energy efficiency measures and 3,000 low energy bulbs. The scientific basis of OSI is a GIS-based DECoRuM model which estimates and maps baseline energy use and CO 2 emissions on a house-by house level, identifies 'pollution' hotspots, predicts the potential for reductions in CO 2 emissions and monitors reductions achieved as a result of deploying energy efficiency measures and renewable energy systems. The application of DECoRuM model to a case study in Oxford shows that CO 2 emission reductions above 60 % are possible, at a cost of between GBP 6 to GBP 77 per tonne of CO 2 emissions saved, depending upon the package of measures used, and the scenario of capital costs (low or high) employed. The OSI and DECoRuM projects have led to the development of an action-oriented Oxford Climate Change Action Plan (OCCAP) which constructs an accurate CO 2 emissions inventory for Oxford city for a baseline year, establishes CO 2 reduction targets and proposes action for each of the energy-related sectors to meet those targets. The OCCAP will be implemented by Oxford City Council and provides a useful example for other cities in their endeavour for emission reductions

  15. A review of initiatives to reduce energy-related CO{sub 2} emissions from the city of Oxford: past, present and future

    Gupta, Rajat [Dept. of Architecture, School of the Built Environment, Oxford Brookes Univ. (United Kingdom)

    2007-07-01

    This paper reviews three key initiatives undertaken in the historical city of Oxford to bring about reductions in energy-related CO{sub 2} emissions on a city-wide scale. The author has been part of all the three initiatives. In 2002, a collaborative partnership between academia, industry and city council started the Oxford Solar Initiative (OSI) which uses a community-based approach to help households and organisations in Oxford, financially and technically, to install solar energy systems and energy efficiency measures in buildings. So far OSI has facilitated the installation of 80 active solar systems, over 450 energy efficiency measures and 3,000 low energy bulbs. The scientific basis of OSI is a GIS-based DECoRuM model which estimates and maps baseline energy use and CO{sub 2} emissions on a house-by house level, identifies 'pollution' hotspots, predicts the potential for reductions in CO{sub 2} emissions and monitors reductions achieved as a result of deploying energy efficiency measures and renewable energy systems. The application of DECoRuM model to a case study in Oxford shows that CO{sub 2} emission reductions above 60 % are possible, at a cost of between GBP 6 to GBP 77 per tonne of CO{sub 2} emissions saved, depending upon the package of measures used, and the scenario of capital costs (low or high) employed. The OSI and DECoRuM projects have led to the development of an action-oriented Oxford Climate Change Action Plan (OCCAP) which constructs an accurate CO{sub 2} emissions inventory for Oxford city for a baseline year, establishes CO{sub 2} reduction targets and proposes action for each of the energy-related sectors to meet those targets. The OCCAP will be implemented by Oxford City Council and provides a useful example for other cities in their endeavour for emission reductions.

  16. Oxford Partial Knee Replacement as a Gateway to Outpatient Arthroplasty “Lessons Learned along the Journey”

    Michael E Berend

    2016-09-01

    Full Text Available The Oxford Partial Knee Replacement was approved for implantation in the US in 2004 after the surgeon completed an educational training requirement.  Since then my knee practiced has expanded to over 50% partial knee.  This experience coupled with refinement of surgical techniques, anesthesia protocols, and patient selection has facilitated the transformation to same day discharge for partial knee cases and has quickly transitioned to total hip, total knee, and selected revision surgeries.  Patient selection has also expanded for outpatient joints and is now based on medical screening criteria and insurance access.  Over a two-year period we have performed over 1,000 outpatient arthroplasty procedures with no readmissions for pain control.   Overall readmission rate for all reasons was 2%.  Patient satisfaction scores were 98% Great-Good for 2014-15.  The combination of a partial knee replacement practice and an outpatient joint program brings the best VALUE to the patients, surgeons, and the arthroplasty system and represents the future of arthroplasty care.

  17. Remaking the medico-legal scene: a social history of the late-Victorian coroner in Oxford.

    Hurren, Elizabeth T

    2010-04-01

    There have been wide-ranging debates about medicine and the law encapsulated in the figure of the coroner in Victorian England. Recently the historical literature on coroners has been enriched by macro-studies. Despite this important research, the social lives of coroners and their daily interactions remain relatively neglected in standard historical accounts. This article redresses that issue by examining the working life of the coroner for Oxford during the late-Victorian era. Edward Law Hussey kept very detailed records of his time in office as coroner. New research material makes it feasible to trace his professional background, from doctor of the sick poor, to hospital house surgeon and then busy coroner. His career trajectory, personal interactions, and professional disputes, provide an important historical prism illuminating contemporary debates that occupied coroners in their working lives. Hussey tried to improve his medico-legal reach and the public image of his coroner's office by reducing infanticide rates, converting a public mortuary, and acquiring a proper coroner's court. His campaigns had limited success because the social scene in which he worked was complicated by the dominance of health and welfare agencies that resented his role as an expanding arm of the Victorian information state.

  18. Minimally important change was estimated for the Manchester-Oxford Foot Questionnaire after foot/ankle surgery.

    Dawson, Jill; Boller, Irene; Doll, Helen; Lavis, Grahame; Sharp, Robert; Cooke, Paul; Jenkinson, Crispin

    2014-06-01

    To ascertain the smallest amounts of change for the three Manchester-Oxford Foot Questionnaire (MOXFQ) domains that are likely to be clinically meaningful and beyond measurement error for conditions affecting the foot/ankle. Estimates were compared with those from the Short-Form 36 (SF-36). A prospective observational study of 671 consecutive patients undergoing foot or ankle surgery at an orthopedic hospital. Before and 9 months after surgery, patients completed the MOXFQ and SF-36; transition items (anchor) asked about perceived changes in foot/ankle pain or problems since the surgery. Four hundred ninety-one patients completed pre- and postoperative questionnaires. Anchor-based minimal clinically important change (MCIC) values were ~13 points for each of the MOXFQ Walking/standing (W/S), Pain, and Social Interaction (S-I) domains [and greater than the standard error of measurement (SEM)]. MCIC values for all SF-36 domains fell within the SEM. Between-group MCIDs for the MOXFQ were W/S, 16.2; Pain, 9.9; S-I, 9.3. Distribution-based minimal detectable change (MDC90) values for the MOXFQ were ~11, ~12, and ~16 score points for the W/S, Pain, and S-I scales, respectively. This article provides information for aiding the interpretability of MOXFQ outcomes data and for planning future studies. The SF-36 is not recommended as a primary outcome for foot/ankle surgery. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. Assessing the utility of the Oxford Nanopore MinION for snake venom gland cDNA sequencing

    Adam D. Hargreaves

    2015-11-01

    Full Text Available Portable DNA sequencers such as the Oxford Nanopore MinION device have the potential to be truly disruptive technologies, facilitating new approaches and analyses and, in some cases, taking sequencing out of the lab and into the field. However, the capabilities of these technologies are still being revealed. Here we show that single-molecule cDNA sequencing using the MinION accurately characterises venom toxin-encoding genes in the painted saw-scaled viper, Echis coloratus. We find the raw sequencing error rate to be around 12%, improved to 0–2% with hybrid error correction and 3% with de novo error correction. Our corrected data provides full coding sequences and 5′ and 3′ UTRs for 29 of 33 candidate venom toxins detected, far superior to Illumina data (13/40 complete and Sanger-based ESTs (15/29. We suggest that, should the current pace of improvement continue, the MinION will become the default approach for cDNA sequencing in a variety of species.

  20. Assessing the utility of the Oxford Nanopore MinION for snake venom gland cDNA sequencing.

    Hargreaves, Adam D; Mulley, John F

    2015-01-01

    Portable DNA sequencers such as the Oxford Nanopore MinION device have the potential to be truly disruptive technologies, facilitating new approaches and analyses and, in some cases, taking sequencing out of the lab and into the field. However, the capabilities of these technologies are still being revealed. Here we show that single-molecule cDNA sequencing using the MinION accurately characterises venom toxin-encoding genes in the painted saw-scaled viper, Echis coloratus. We find the raw sequencing error rate to be around 12%, improved to 0-2% with hybrid error correction and 3% with de novo error correction. Our corrected data provides full coding sequences and 5' and 3' UTRs for 29 of 33 candidate venom toxins detected, far superior to Illumina data (13/40 complete) and Sanger-based ESTs (15/29). We suggest that, should the current pace of improvement continue, the MinION will become the default approach for cDNA sequencing in a variety of species.

  1. The petrography of the Jurassic core from the Harwell research site. Part 1: Kimmeridge Clay, Corallian Beds and Oxford Clay

    Milodowski, A.E.

    1983-06-01

    Detailed examination by mineralogical and petrological techniques has enabled a detailed characterisation of the lithologies of the Oxford Clay, Corallian Beds and the Kimmeridge Clay beneath the Harwell Research Site. Information obtained has revealed the nature of the bulk mineralogy, pore-types, pore-surface mineralogy and post-depositional alteration of the rocks. Diagenesis has played an important part in determining the mineralogy, porosity and fabric of the rocks and has had the greatest variation of effects in the Corallian Beds, determining the phases now in contact with groundwater. It is these authigenic phases that are of key interest in assessing the behaviour of radionuclides which may be released into the local groundwater systems. The importance of the different pore-types characterised during this investigation and of the mineral phases lining these potential pathways for groundwater movement are discussed in detail at the end of this report. Diagenesis has reduced primary porosity in many of the Corallian rocks by calcite precipitation. In such rocks where a cohesive cement is present, groundwater flow must occur along large-scale fractures and more slowly along intercrystalline grain-boundary cracks. (author)

  2. Cross-Cultural Adaptation and Validation of the Persian Version of the Oxford Knee Score in Patients with Knee Osteoarthritis

    Mohammad Hosein Ebrahimzadeh

    2014-11-01

    Full Text Available Background: The Oxford Knee Score (OKS is a short patient-reported outcome instrument that measures pain and physical activity related to knee osteoarthritis. The purpose of this study is to evaluate, construct validity and consistent reliability of the Persian version of the OKS. Methods: The case series consisted of 80 patients who were clinically diagnosed with having knee osteoarthritis. All patients were requested to fill-in the Persian OKS and Short-Form 36 Health Survey (SF-36. Correlation analysis between the Persian versions of these two instruments was then carried out. The scores of the Persian SF-36 were used to evaluate convergent and divergent validity of the 12-item Persian OKS. Results: From a total of 80 patients, 63 were female (79% and the remaining 17 were male (21% with a mean age of 52.2 years. In the present study, high Cronbach’s alpha of 0.95 confirms excellent internal consistency of the Persian OKS scale similar to previous investigations. The results confirm that the Persian version of this instrument is valid and reliable, similar to its English index and its subsequent translations in different languages. Conclusion: The Persian OKS is a reliable instrument to evaluate knee function in patients with knee osteoarthritis and is a useful tool for outcome measurement in clinical research.

  3. 15x optical zoom and extreme optical image stabilisation: diffraction limited integral field spectroscopy with the Oxford SWIFT spectrograph

    Tecza, Matthias; Thatte, Niranjan; Clarke, Fraser; Lynn, James; Freeman, David; Roberts, Jennifer; Dekany, Richard

    2012-09-01

    When commissioned in November 2008 at the Palomar 200 inch Hale Telescope, the Oxford SWIFT I and z band integral field spectrograph, fed by the adaptive optics system PALAO, provided a wide (3×) range of spatial resolutions: three plate scales of 235 mas, 160 mas, and 80 mas per spaxel over a contiguous field-of-view of 89×44 pixels. Depending on observing conditions and guide star brightness we can choose a seeing limited scale of 235 mas per spaxel, or 160 mas and 80 mas per spaxel for very bright guide star AO with substantial increase of enclosed energy. Over the last two years PALAO was upgraded to PALM-3000: an extreme, high-order adaptive optics system with two deformable mirrors with more than 3000 actuators, promising diffraction limited performance in SWIFT's wavelength range. In order to take advantage of this increased spatial resolution we upgraded SWIFT with new pre-optics allowing us to spatially Nyquist sample the diffraction limited PALM-3000 point spread function with 16 mas resolution, reducing the spaxel scale by another factor of 5×. We designed, manufactured, integrated and tested the new pre-optics in the first half of 2011 and commissioned it in December 2011. Here we present the opto-mechanical design and assembly of the new scale changing optics, as well as laboratory and on-sky commissioning results. In optimal observing conditions we achieve substantial Strehl ratios, delivering the near diffraction limited spatial resolution in the I and z bands.

  4. Cross-cultural adaptation and validation of the persian version of the oxford knee score in patients with knee osteoarthritis.

    Ebrahimzadeh, Mohammad Hosein; Makhmalbaf, Hadi; Birjandinejad, Ali; Soltani-Moghaddas, Seyed Hosein

    2014-11-01

    The Oxford Knee Score (OKS) is a short patient-reported outcome instrument that measures pain and physical activity related to knee osteoarthritis. The purpose of this study is to evaluate, construct validity and consistent reliability of the Persian version of the OKS. The case series consisted of 80 patients who were clinically diagnosed with having knee osteoarthritis. All patients were requested to fill-in the Persian OKS and Short-Form 36 Health Survey (SF-36). Correlation analysis between the Persian versions of these two instruments was then carried out. The scores of the Persian SF-36 were used to evaluate convergent and divergent validity of the 12-item Persian OKS. From a total of 80 patients, 63 were female (79%) and the remaining 17 were male (21%) with a mean age of 52.2 years. In the present study, high Cronbach's alpha of 0.95 confirms excellent internal consistency of the Persian OKS scale similar to previous investigations. The results confirm that the Persian version of this instrument is valid and reliable, similar to its English index and its subsequent translations in different languages. The Persian OKS is a reliable instrument to evaluate knee function in patients with knee osteoarthritis and is a useful tool for outcome measurement in clinical research.

  5. Validation of the translated Oxford ankle foot questionnaire in 82 Danish children aged between five and 16 years.

    Martinkevich, P; Møller-Madsen, B; Gottliebsen, M; Kjeldgaard Pedersen, L; Rahbek, O

    2015-03-01

    We present the validation of a translation into Danish of the Oxford ankle foot questionnaire (OxAFQ). We followed the Isis Pros guidelines for translation and pilot-tested the questionnaire on ten children and their parents. Following modifications we tested the validity of the final questionnaire on 82 children (36 boys and 45 girls) with a mean age of 11.7 years (5.5 to 16.0) and their parents. We tested the reliability (repeatability (test-retest), child-parent agreement, internal consistency), feasibility (response rate, time to completion, floor and ceiling effects) and construct validity. The generic child health questionnaire was used for comparison. We found good internal consistency for the physical and the school and play domains, but lower internal consistency for the emotional domain. Overall, good repeatability was found within children and parents as well as agreement between children and parents. The OxAFQ was fast and easy to complete, but we observed a tendency towards ceiling effects in the school and play and emotional domains. To our knowledge this is the first independent validation of the OxAFQ in any language. We found it valid and feasible for use in the clinic to assess the impact on children's lives of foot and/or ankle disorders. It is a valuable research tool. ©2015 The British Editorial Society of Bone & Joint Surgery.

  6. Validity and reliability of the Turkish version of the Manchester-Oxford Foot Questionnaire for hallux valgus deformity evaluation.

    Talu, Burcu; Bayramlar, Kezban; Bek, Nilgün; Yakut, Yavuz

    2016-01-01

    The aim of this study was to evaluate the reliability and validity of the Turkish version of the Manchester-Oxford Foot Questionnaire (MOXFQ) in patients affected by hallux valgus in order to assess the accuracy of this cross-cultural adaption. Thirty female volunteers aged between 18 and 55 years were included in the study. Subjects with hallux valgus were asked to complete the MOXFQ and the Short-Form 36 Health Survey (SF-36). After receiving permission from the author, the MOXFQ was translated into Turkish twice and then back translated to English, after which its compatibility was evaluated. The Turkish version of the MOXFO was applied twice, 1-3 days apart, to the study subjects. Internal consistency and test-retest reliability were assessed using Cronbach's alpha and intraclass correlation coefficient (ICC), respectively. Construct validity was assessed with the use of Spearman's rank correlation coefficient, using a priori hypothesized correlations with SF-36 domains. Subjects achieved similar scores at the first and second administration of the questionnaire (validity was supported by the presence of all the hypothesized correlations, with SF-36 within its physical parameters. The Turkish version of the MOXFQ is a valid and reliable tool for evaluating foot pain and functional status in patients affected by hallux valgus.

  7. Reliability, validity and responsiveness of the Spanish Manchester-Oxford Foot Questionnaire (MOXFQ) in patients with foot or ankle surgery.

    Garcés, Juan B Gerstner; Winson, Ian; Goldhahn, Sabine; Castro, Michael D; Swords, Michael P; Grujic, Leslie; Rammelt, Stefan; Sands, Andrew K

    2016-03-01

    The Manchester-Oxford Foot Questionnaire (MOXFQ) has been validated in Spanish for use in patients undergoing foot and ankle surgery. 120 patients completed the MOXFQ and the SF-36 before surgery and 6 and 12 months postoperative. Surgeons completed the American Orthopaedic Foot and Ankle Society (AOFAS) Clinical Rating System. Psychometric properties were assessed for all three MOXFQ dimensions, and for the MOXFQ Index. The Spanish MOXFQ demonstrated consistency with Cronbach's alpha values between 0.65 and 0.90, and reliability ([ICCs] >0.95). It shows a moderate to strong correlation between the Walking/standing dimension and the related domains of the SF-36 (|r|>0.6), the AOFAS Ankle-Hindfoot Scale (|r|>0.47) and Hallux-MTP-IP Scale (|r|>0.64). Responsiveness was excellent, (effect sizes >2.1). The respective minimal detectable change (MDC90) was 14.18 for the MOXFQ Index. The Spanish version of the MOXFQ showed good psychometric properties in patients with foot and ankle disorders. Copyright © 2015 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.

  8. Results of the radiological survey at the former Alba Craft Laboratory site properties, Oxford, Ohio (OXO001)

    Murray, M.E.; Brown, K.S.; Mathis, R.A.

    1993-03-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at the former Alba Craft Laboratory Site Properties, Oxford, Ohio. The survey was performed in July and September of 1992. The purpose of the survey was to determine whether the property was contaminated with radioactive residues, primarily 238 U, from uranium machining operations conducted for National Lead of Ohio, a prime Atomic Energy Commission contractor. The survey included scan measurement of direct radiation levels inside and outside the former laboratory, outdoors on eight properties adjoining the former laboratory, and the city right-of-way adjacent to the surveyed properties. Radionuclide concentrations were determined in outdoor surface and subsurface soil samples taken from each property and the exterior of the laboratory. Fixed surface residual radioactivity was measured inside the laboratory and outside the building. Air samples were collected, direct exposure was measured, and samples were collected to measure transferable radioactivity inside the building. Results of the survey indicate areas where surface and soil contamination level s are above the DOE guidelines for uncontrolled areas

  9. Benchmarking of the Oxford Nanopore MinION sequencing for quantitative and qualitative assessment of cDNA populations.

    Oikonomopoulos, Spyros; Wang, Yu Chang; Djambazian, Haig; Badescu, Dunarel; Ragoussis, Jiannis

    2016-08-24

    To assess the performance of the Oxford Nanopore Technologies MinION sequencing platform, cDNAs from the External RNA Controls Consortium (ERCC) RNA Spike-In mix were sequenced. This mix mimics mammalian mRNA species and consists of 92 polyadenylated transcripts with known concentration. cDNA libraries were generated using a template switching protocol to facilitate the direct comparison between different sequencing platforms. The MinION performance was assessed for its ability to sequence the cDNAs directly with good accuracy in terms of abundance and full length. The abundance of the ERCC cDNA molecules sequenced by MinION agreed with their expected concentration. No length or GC content bias was observed. The majority of cDNAs were sequenced as full length. Additionally, a complex cDNA population derived from a human HEK-293 cell line was sequenced on an Illumina HiSeq 2500, PacBio RS II and ONT MinION platforms. We observed that there was a good agreement in the measured cDNA abundance between PacBio RS II and ONT MinION (rpearson = 0.82, isoforms with length more than 700bp) and between Illumina HiSeq 2500 and ONT MinION (rpearson = 0.75). This indicates that the ONT MinION can sequence quantitatively both long and short full length cDNA molecules.

  10. Volatile organic compound emissions during hot-pressing of southern pine particleboard : panel size effects and trade-off between press time and temperature

    Wenlong Wang; Douglas J. Gardner; Melissa G.D. Baumann

    2002-01-01

    In previous research, it was shown that decreasing either press temperature or press time generally resulted in decreased volatile organic compound (VOC) emissions during the hot-pressing of southern pine particleboard. However, because it is impossible to reduce both pressing time and temperature while maintaining panel physical and mechanical properties, this study...

  11. Comparison of Myoelectric Activity of a Selection of Upper Extremity Muscles while Doing Bench Press in Two Training Methods of TRX and Barbell Bench Press

    Ahmad Reza Zibaei

    2016-12-01

    Conclusion: Considering these results it can be maintained that TRX bench press resistance training can be an alternative and effective practice for barbell bench press because, given the results, it can be appreciated that TRX bench press, dips low in the trunk, can lead to muscle activity close to the level of muscle activity during the barbell bench press drill.

  12. A comparative study between spiral-filter press and belt press implemented in a cloudy apple juice production process.

    De Paepe, Domien; Coudijzer, Katleen; Noten, Bart; Valkenborg, Dirk; Servaes, Kelly; De Loose, Marc; Diels, Ludo; Voorspoels, Stefan; Van Droogenbroeck, Bart

    2015-04-15

    In this study, advantages and disadvantages of the innovative, low-oxygen spiral-filter press system were studied in comparison with the belt press, commonly applied in small and medium size enterprises for the production of cloudy apple juice. On the basis of equivalent throughput, a higher juice yield could be achieved with spiral-filter press. Also a more turbid juice with a higher content of suspended solids could be produced. The avoidance of enzymatic browning during juice extraction led to an attractive yellowish juice with an elevated phenolic content. Moreover, it was found that juice produced with spiral-filter press demonstrates a higher retention of phenolic compounds during the downstream processing steps and storage. The results demonstrates the advantage of the use of a spiral-filter press in comparison with belt press in the production of a high quality cloudy apple juice rich in phenolic compounds, without the use of oxidation inhibiting additives. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Elbow joint fatigue and bench-press training.

    Huang, Yen-Po; Chou, You-Li; Chen, Feng-Chun; Wang, Rong-Tyai; Huang, Ming-Jer; Chou, Paul Pei-Hsi

    2014-01-01

    Bench-press exercises are among the most common form of training exercise for the upper extremity because they yield a notable improvement in both muscle strength and muscle endurance. The literature contains various investigations into the effects of different bench-press positions on the degree of muscle activation. However, the effects of fatigue on the muscular performance and kinetics of the elbow joint are not understood fully. To investigate the effects of fatigue on the kinetics and myodynamic performance of the elbow joint in bench-press training. Controlled laboratory study. Motion research laboratory. A total of 18 physically healthy male students (age = 19.6 ± 0.8 years, height = 168.7 ± 5.5 cm, mass = 69.6 ± 8.6 kg) participated in the investigation. All participants were right-hand dominant, and none had a history of upper extremity injuries or disorders. Participants performed bench-press training until fatigued. Maximal possible number of repetitions, cycle time, myodynamic decline rate, elbow-joint force, and elbow-joint moment. We observed a difference in cycle time in the initial (2.1 ± 0.42 seconds) and fatigue (2.58 ± 0.46 seconds) stages of the bench-press exercise (P = .04). As the participants fatigued, we observed an increase in the medial-lateral force (P = .03) and internal-external moment (P ≤ .04) acting on the elbow joint. Moreover, a reduction in the elbow muscle strength was observed in the elbow extension-flexion (P ≤ .003) and forearm supination-pronation (P ≤ .001) conditions. The results suggest that performing bench-press exercises to the point of fatigue increases elbow-joint loading and may further increase the risk of injury. Therefore, when clinicians design bench-press exercise regimens for general athletic training, muscle strengthening, or physical rehabilitation, they should control carefully the maximal number of repetitions.

  14. Movement Features Which Describe the Flat Bench Press

    Król Henryk

    2017-06-01

    Full Text Available Introduction. In sport technique studies, motion features can be useful as they have a certain defined measure [1]. In this work, we examined the following three features: the structure of the movement (all the characteristics of the movement, the fluency of the movement, and the rhythm of the movement. The aim of the study was to determine the usefulness of the selected movement features in the evaluation of the flat bench press. The protocol of the study included a flat bench press with free weights and a “touch-and-go” technique. Material and methods. The study involved twenty healthy men; however, only two were selected for analysis. The first subject was a 25-year-old powerlifter (body mass = 95 kg; body height = 182 cm; 1-RM in flat bench press = 145 kg. The second one was a 25-year-old bodybuilder (body mass = 77 kg; body height = 175 cm; 1-RM in flat bench press = 100 kg. The subjects performed consecutive sets of a single repetition of flat bench pressing with an increasing load (70, 80, 90, and 100% 1-RM, with the anticipated maximum weight, until the completion of one repetition maximum. Multidimensional movement analysis was made with the measuring system Smart-E (BTS, Italy, which consisted of six infrared cameras (120 Hz and a wireless module to measure muscle bioelectric activity (Pocket EMG. Results. It was demonstrated that the internal structure of the bench press performed by the bodybuilder and the powerlifter was different. As the time-history of barbell kinematics (the acceleration-time curve showed, with increased loading of the barbell, the rhythm of the flat bench press changed, and the fluidity of the movement worsened.

  15. Freedom of the Press In the Scope of Human Rights

    Sri Ayu Astuti

    2014-01-01

    Full Text Available Freedom of expression and press freedom is the embodiment of the recognition of human rights. Freedom of expression is also the existence of press to disclose the news with honesty and do not get a pressure to deliver the news to the public space, which in news production is known as a work of journalism. Now the  press has gained freedom of expression in the news production process which is guaranteed in the state constitution. Although Article 28 of the Constitution of the Republic of Indonesia 1945 does not point directly at the press, However, Article 28 F emphasis on processing and storage as well as ownership, excavations to information. It also contains provisions on the freedom of expression of others, which should be valued and respected. It shows equality for everyone in his position before the law in accordance with Article 27 1945 Constitution, which emphasizes the recognition of constitutional rights that belong to every person in the state of law in the Republic of Indonesia. Thus the press, which have freedom of expression in the writings of journalistic works are required to be responsible for the published news. So as not to face the legal issues and criminalization, then press should perform tasks and functions to enforce ethics as the precautionary principle when processing the news and broadcast it to the public space, as well as upholding human rights. How To Cite: Astuti, S. (2014. Freedom of the Press In the Scope of Human Rights. Rechtsidee, 1(1, 101-118. doi:http://dx.doi.org/10.21070/jihr.v1i1.96

  16. The Japanese Histologic Classification and T-score in the Oxford Classification system could predict renal outcome in Japanese IgA nephropathy patients.

    Kaihan, Ahmad Baseer; Yasuda, Yoshinari; Katsuno, Takayuki; Kato, Sawako; Imaizumi, Takahiro; Ozeki, Takaya; Hishida, Manabu; Nagata, Takanobu; Ando, Masahiko; Tsuboi, Naotake; Maruyama, Shoichi

    2017-12-01

    The Oxford Classification is utilized globally, but has not been fully validated. In this study, we conducted a comparative analysis between the Oxford Classification and Japanese Histologic Classification (JHC) to predict renal outcome in Japanese patients with IgA nephropathy (IgAN). A retrospective cohort study including 86 adult IgAN patients was conducted. The Oxford Classification and the JHC were evaluated by 7 independent specialists. The JHC, MEST score in the Oxford Classification, and crescents were analyzed in association with renal outcome, defined as a 50% increase in serum creatinine. In multivariate analysis without the JHC, only the T score was significantly associated with renal outcome. While, a significant association was revealed only in the JHC on multivariate analysis with JHC. The JHC and T score in the Oxford Classification were associated with renal outcome among Japanese patients with IgAN. Superiority of the JHC as a predictive index should be validated with larger study population and cohort studies in different ethnicities.

  17. Engaging and Supporting a University Press Scholarly Community

    Megan Taylor

    2018-03-01

    Full Text Available In this paper we explore how the development of The University of Huddersfield Press, a publisher of open access scholarly journals and monographs, has enabled the sharing of research with a wider online audience. We situate the development of the Press within a wider research environment and growing community of New University Presses (NUPs where there is an increasing demand for demonstrating research impact, which drives the need for improved analysis and reporting of impact data, a task that often falls within the remit of library and academic support services. We detail the benefits of the University Press Manager role in terms of ensuring professional service that delivers consistency and sustainability. We go on to outline the experiences of engaging with different online spaces and detail the extensive support for student authors. We argue that in order for the Press to support building a strong and engaged scholarly community and provide new spaces for emerging research, continued investment in both platform development and infrastructure is required.

  18. New insights into Mesozoic cycad evolution: an exploration of anatomically preserved Cycadaceae seeds from the Jurassic Oxford Clay biota

    Alan R.T. Spencer

    2017-08-01

    Full Text Available Most knowledge concerning Mesozoic Era floras has come from compression fossils. This has been augmented in the last 20 years by rarer permineralized material showing cellular preservation. Here, we describe a new genus of anatomically preserved gymnosperm seed from the Callovian–Oxfordian (Jurassic Oxford Clay Formation (UK, using a combination of traditional sectioning and synchrotron radiation X-ray micro-tomography (SRXMT. Oxfordiana motturii gen. et sp. nov. is large and bilaterally symmetrical. It has prominent external ribs, and has a three-layered integument comprising: a narrow outer layer of thick walled cells; a thick middle parenchymatous layer; and innermost a thin fleshy layer. The integument has a longitudinal interior groove and micropyle, enveloping a nucellus with a small pollen chamber. The large size, bilateral symmetry and integumentary groove demonstrate an affinity for the new species within the cycads. Moreover, the internal groove in extant taxa is an autapomorphy of the genus Cycas, where it facilitates seed germination. Based upon the unique seed germination mechanism shared with living species of the Cycadaceae, we conclude that O. motturii is a member of the stem-group lineage leading to Cycas after the Jurassic divergence of the Cycadaceae from other extant cycads. SRXMT—for the first time successfully applied to fossils already prepared as slides—reveals the distribution of different mineral phases within the fossil, and allows us to evaluate the taphonomy of Oxfordiana. An early pyrite phase replicates the external surfaces of individual cells, a later carbonate component infilling void spaces. The resulting taphonomic model suggests that the relatively small size of the fossils was key to their exceptional preservation, concentrating sulfate-reducing bacteria in a locally closed microenvironment and thus facilitating soft-tissue permineralization.

  19. Metabolic profiles of male meat eaters, fish eaters, vegetarians, and vegans from the EPIC-Oxford cohort.

    Schmidt, Julie A; Rinaldi, Sabina; Ferrari, Pietro; Carayol, Marion; Achaintre, David; Scalbert, Augustin; Cross, Amanda J; Gunter, Marc J; Fensom, Georgina K; Appleby, Paul N; Key, Timothy J; Travis, Ruth C

    2015-12-01

    Human metabolism is influenced by dietary factors and lifestyle, environmental, and genetic factors; thus, men who exclude some or all animal products from their diet might have different metabolic profiles than meat eaters. We aimed to investigate differences in concentrations of 118 circulating metabolites, including acylcarnitines, amino acids, biogenic amines, glycerophospholipids, hexose, and sphingolipids related to lipid, protein, and carbohydrate metabolism between male meat eaters, fish eaters, vegetarians, and vegans from the Oxford arm of the European Prospective Investigation into Cancer and Nutrition. In this cross-sectional study, concentrations of metabolites were measured by mass spectrometry in plasma from 379 men categorized according to their diet group. Differences in mean metabolite concentrations across diet groups were tested by using ANOVA, and a false discovery rate-controlling procedure was used to account for multiple testing. Principal component analysis was used to investigate patterns in metabolic profiles. Concentrations of 79% of metabolites differed significantly by diet group. In the vast majority of these cases, vegans had the lowest concentration, whereas meat eaters most often had the highest concentrations of the acylcarnitines, glycerophospholipids, and sphingolipids, and fish eaters or vegetarians most often had the highest concentrations of the amino acids and a biogenic amine. A clear separation between patterns in the metabolic profiles of the 4 diet groups was seen, with vegans being noticeably different from the other groups because of lower concentrations of some glycerophospholipids and sphingolipids. Metabolic profiles in plasma could effectively differentiate between men from different habitual diet groups, especially vegan men compared with men who consume animal products. The difference in metabolic profiles was mainly explained by the lower concentrations of glycerophospholipids and sphingolipids in vegans.

  20. Metabolic profiles of male meat eaters, fish eaters, vegetarians, and vegans from the EPIC-Oxford cohort12

    Schmidt, Julie A; Rinaldi, Sabina; Ferrari, Pietro; Carayol, Marion; Achaintre, David; Scalbert, Augustin; Cross, Amanda J; Gunter, Marc J; Fensom, Georgina K; Appleby, Paul N; Key, Timothy J; Travis, Ruth C

    2015-01-01

    Background: Human metabolism is influenced by dietary factors and lifestyle, environmental, and genetic factors; thus, men who exclude some or all animal products from their diet might have different metabolic profiles than meat eaters. Objective: We aimed to investigate differences in concentrations of 118 circulating metabolites, including acylcarnitines, amino acids, biogenic amines, glycerophospholipids, hexose, and sphingolipids related to lipid, protein, and carbohydrate metabolism between male meat eaters, fish eaters, vegetarians, and vegans from the Oxford arm of the European Prospective Investigation into Cancer and Nutrition. Design: In this cross-sectional study, concentrations of metabolites were measured by mass spectrometry in plasma from 379 men categorized according to their diet group. Differences in mean metabolite concentrations across diet groups were tested by using ANOVA, and a false discovery rate–controlling procedure was used to account for multiple testing. Principal component analysis was used to investigate patterns in metabolic profiles. Results: Concentrations of 79% of metabolites differed significantly by diet group. In the vast majority of these cases, vegans had the lowest concentration, whereas meat eaters most often had the highest concentrations of the acylcarnitines, glycerophospholipids, and sphingolipids, and fish eaters or vegetarians most often had the highest concentrations of the amino acids and a biogenic amine. A clear separation between patterns in the metabolic profiles of the 4 diet groups was seen, with vegans being noticeably different from the other groups because of lower concentrations of some glycerophospholipids and sphingolipids. Conclusions: Metabolic profiles in plasma could effectively differentiate between men from different habitual diet groups, especially vegan men compared with men who consume animal products. The difference in metabolic profiles was mainly explained by the lower concentrations of

  1. A comparison of foot kinematics in people with normal- and flat-arched feet using the Oxford Foot Model.

    Levinger, Pazit; Murley, George S; Barton, Christian J; Cotchett, Matthew P; McSweeney, Simone R; Menz, Hylton B

    2010-10-01

    Foot posture is thought to influence predisposition to overuse injuries of the lower limb. Although the mechanisms underlying this proposed relationship are unclear, it is thought that altered foot kinematics may play a role. Therefore, this study was designed to investigate differences in foot motion between people with normal- and flat-arched feet using the Oxford Foot Model (OFM). Foot posture in 19 participants was documented as normal-arched (n=10) or flat-arched (n=9) using a foot screening protocol incorporating measurements from weightbearing antero-posterior and lateral foot radiographs. Differences between the groups in triplanar motion of the tibia, rearfoot and forefoot during walking were evaluated using a three-dimensional motion analysis system incorporating a multi-segment foot model (OFM). Participants with flat-arched feet demonstrated greater peak forefoot plantar-flexion (-13.7° ± 5.6° vs -6.5° ± 3.7°; p=0.004), forefoot abduction (-12.9° ± 6.9° vs -1.8° ± 6.3°; p=0.002), and rearfoot internal rotation (10.6° ± 7.5° vs -0.2°± 9.9°; p=0.018) compared to those with normal-arched feet. Additionally, participants with flat-arched feet demonstrated decreased peak forefoot adduction (-7.0° ± 9.2° vs 5.6° ± 7.3°; p=0.004) and a trend towards increased rearfoot eversion (-5.8° ± 4.4° vs -2.5° ± 2.6°; p=0.06). These findings support the notion that flat-arched feet have altered motion associated with greater pronation during gait; factors that may increase the risk of overuse injury. Copyright © 2010 Elsevier B.V. All rights reserved.

  2. Diet and risk of kidney stones in the Oxford cohort of the European Prospective Investigation into Cancer and Nutrition (EPIC).

    Turney, Benjamin W; Appleby, Paul N; Reynard, John M; Noble, Jeremy G; Key, Timothy J; Allen, Naomi E

    2014-05-01

    The lifetime prevalence of kidney stones is around 10 % and incidence rates are increasing. Diet may be an important determinant of kidney stone development. Our objective was to investigate the association between diet and kidney stone risk in a population with a wide range of diets. This association was examined among 51,336 participants in the Oxford arm of the European Prospective Investigation into Cancer and Nutrition using data from Hospital Episode Statistics in England and Scottish Morbidity Records. In the cohort, 303 participants attended hospital with a new kidney stone episode. Cox proportional hazards regression was performed to calculate hazard ratios (HR) and their 95 % confidence intervals (95 % CI). Compared to those with high intake of meat (>100 g/day), the HR estimates for moderate meat-eaters (50-99 g/day), low meat-eaters (<50 g/day), fish-eaters and vegetarians were 0.80 (95 % CI 0.57-1.11), 0.52 (95 % CI 0.35-0.8), 0.73 (95 % CI 0.48-1.11) and 0.69 (95 % CI 0.48-0.98), respectively. High intakes of fresh fruit, fibre from wholegrain cereals and magnesium were also associated with a lower risk of kidney stone formation. A high intake of zinc was associated with a higher risk. In conclusion, vegetarians have a lower risk of developing kidney stones compared with those who eat a high meat diet. This information may be important to advise the public about prevention of kidney stone formation.

  3. Validation of the Korean Version of the Manchester-Oxford Foot Questionnaire in Patients With Hallux Valgus.

    Park, Man-Jun; Ko, Young-Chul; Huh, Jung-Wook; Park, Sook-Hyun; Park, Tae-Hong; Park, Joon-Hyung

    The Manchester-Oxford Foot Questionnaire (MOXFQ) is a practical, reliable, and valid questionnaire for hallux valgus surgery and has been translated into several languages. However, the MOXFQ has not been translated into Korean. In the present study, we aimed to translate and evaluate the validity and reliability of the Korean version of the MOXFQ for patients affected by hallux valgus. In accordance with the guidelines of cross-cultural adaptation, we translated the English version of MOXFQ into Korean and then backward translated it into English. We sent out letters that included the Korean version of the MOXFQ, a visual analog scale measure of pain, and a validated Korean version of the short-form 36-item Health Survey to 135 patients with hallux valgus. A retest was administered after 2 weeks. Of the 135 patients, 104 responded to the first questionnaire, and 82 of the first-time responders returned their second questionnaires. We evaluated the test-retest reliability, internal consistency, concurrent validity, and construct validity of the Korean version of the MOXFQ. The intraclass correlation coefficient for test-retest reliability was 0.82 for the total MOXFQ and ranged from 0.81 to 0.82 for the 3 subscales. Cronbach's alpha for the total MOXFQ was 0.85 and ranged from 0.8 to 0.92 for the 3 subscales. Concurrent and construct validity was supported by significant correlation with the visual analog scale and short-form 36-item Health Survey subscale scores. The Korean version of the MOXFQ was tested, and it was found to be a valid and reliable instrument for patients with hallux valgus. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  4. TA-03-0035 Press Building – D&D

    Hasenack, Marvin Leroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-02

    The Press Building was constructed in 1954 with 15,073 ft2 of floor space. It was built to house a 5000 ton double action Lake Erie hydraulic press and a uranium casting area. Missions included uranium activities associated with the Nuclear Weapons and Rover Rocket programs. At the end of the Rover program, the building continued to support various uranium materials science projects until the building was placed into a cold and dark status in 2013 and then was demolished in 2017. The building interior, the press, and associated systems were radiological contaminated and disposed of as low level waste. The demolition of this building opened up valuable real estate in the TA-3 area for the future construction of an ~11,000 Sq. Ft. Biosafety Level 2 laboratory and office building. This building will support the ongoing Bioscience Division mission at the laboratory.

  5. Natural Hazards and the press in the western Mediterranean region

    M. Llasat-Botija

    2007-07-01

    Full Text Available This study analyses press articles published between 1982 and 2005 in an attempt to describe the social perception of natural hazards in Catalonia. The articles included in the database have been classified according to different types of risk. In addition, the study examines the evolution of each type of risk in the press coverage during the study period. Finally, the results have been compared to data provided by insurance companies with respect to compensations paid out for damages. Conclusions show that floods are the most important natural hazard in the region, but that the number of headlines for each event is greater in the case of snowfalls and forest fires. Factors such as the season of the year, the proximity of the affected region to the capital, the topical issues at the time, and the presence of other important news must be considered when the impact in the press is analysed.

  6. Asynchronous decision making in a memorized paddle pressing task.

    Dankert, James R; Olson, Byron; Si, Jennie

    2008-12-01

    This paper presents a method for asynchronous decision making using recorded neural data in a binary decision task. This is a demonstration of a technique for developing motor cortical neural prosthetics that do not rely on external cued timing information. The system presented in this paper uses support vector machines and leaky integrate-and-fire elements to predict directional paddle presses. In addition to the traditional metrics of accuracy, asynchronous systems must also optimize the time needed to make a decision. The system presented is able to predict paddle presses with a median accuracy of 88% and all decisions are made before the time of the actual paddle press. An alternative bit rate measure of performance is defined to show that the system proposed here is able to perform the task with the same efficiency as the rats.

  7. The regulation of press freedoms (1863-1867

    Laurence Coudart

    2015-10-01

    Full Text Available The main objective of this essay is to analyze the legislation affecting the press during the French Intervention and the Second Mexican Empire and establish their regulatory effects. These regulations are frequently ignored by the historiography. The article is limited to the origins, innovations, mechanisms and evolution of printing regulations during this period. As a whole, this allows the reader to observe the restrictive conception of press freedom held by the Mexican political class and their willingness, during the second half of the 19th Century, to turn to prohibitive, repressive, authoritarian and centralist legislation. The article also reveals the extent to which Imperial legislation and its logic of censorship were neither unprecedented nor sudden foreign impositions but instead the expressions of a long-lasting desire for government control over the press.

  8. Method for hot pressing irregularly shaped refractory articles

    Steinkamp, William E.; Ballard, Ambrose H.

    1982-01-01

    The present invention is directed to a method for hot pressing irregularly haped refractory articles with these articles of varying thickness being provided with high uniform density and dimensional accuracy. Two partially pressed compacts of the refractory material are placed in a die cavity between displaceable die punches having compact-contacting surfaces of the desired article configuration. A floating, rotatable block is disposed between the compacts. The displacement of the die punches towards one another causes the block to rotate about an axis normal to the direction of movement of the die punches to uniformly distribute the pressure loading upon the compacts for maintaining substantially equal volume displacement of the powder material during the hot pressing operation.

  9. Advertising presence on the visual configuration of the digital press

    Belinda de Frutos Torres

    2016-07-01

    Full Text Available Visual strength is responsible for one of the mayor changes undergone by the digital press with Internet explosion and the increase of the Informational and Communicational Technologies. The present study analyzes the structure the digital press has taken and the role of the digital advertisement in the composition of their textual and iconic elements. The paper quantifies the picture representations volume and compares their presence on the digital natives papers with those coming from the traditional paper support. The results reveal that there is a mayor contribution of adverts on the native on-line press compare to the on-line paper arriving from the traditional media decreasing the information volume. At the same time the visual volume is boosted on the former compare to the digital media with a paper support. Altogether it can be said that visual component prompted the digital papers first page, being this effect enhanced on the native digital papers.

  10. Film Advertising in the Albanian Press before World War II

    Vjollca Hysi Panajoti

    2015-05-01

    Full Text Available This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the Albanian press film advertising compare to advertising in the foreign press and what were the difficulties facing advertising at this time, are the other important issues addressed in this study. Over a century has passed since Harper's Weekly wrote that 'advertisements are a reflection of real life, a kind of fossil by which chroniclers can rewrite history in order to complete the graphic, even if all other historical evidence may have disappeared.

  11. Comparison of concentric and eccentric bench press repetitions to failure.

    Kelly, Stephen B; Brown, Lee E; Hooker, Steven P; Swan, Pamela D; Buman, Matthew P; Alvar, Brent A; Black, Laurie E

    2015-04-01

    Eccentric muscle actions (ECC) are characterized by muscle lengthening, despite actin-myosin crossbridge formation. Muscles acting eccentrically are capable of producing higher levels of force compared with muscles acting concentrically. The purpose of this study was to determine whether ECC bench press yields greater strength than concentric (CON) as determined by 1 repetition maximum (1RM). Additionally, a comparison was made examining differences in the number of repetitions to failure at different relative intensities of 1RM. Thirty healthy men (age = 24.63 ± 5.6 years) were tested for 1RM in CON and ECC bench press and the number of repetitions completed at 60, 70, 80, and 90% 1RM. For CON repetitions, the weight was mechanically lowered to the chest, and the participant pressed it up until the elbows were fully extended. The ECC bench press consisted of lowering a barbell from a fully extended elbow position to the chest in a continuous controlled manner for 3 seconds as determined by electronic metronome. Paired t-tests showed that ECC 1RM (115.99 ± 31.08 kg) was significantly (p ≤ 0.05) greater than CON 1RM (93.56 ± 26.56 kg), and the number of repetitions completed at 90% 1RM was significantly (p ≤ 0.05) greater in ECC (7.67 ± 3.24) as compared with CON (4.57 ± 2.21). There were no significant differences in number of completed repetitions during CON and ECC bench press at 60, 70, and 80% 1RM. These data indicate that ECC actions yield increased force capabilities (∼120%) as compared with CON in the bench press and may be less prone to fatigue, especially at higher intensities. These differences suggest a need to develop unique strategies for training eccentrically.

  12. Process design of press hardening with gradient material property influence

    Neugebauer, R.; Schieck, F.; Rautenstrauch, A.

    2011-01-01

    Press hardening is currently used in the production of automotive structures that require very high strength and controlled deformation during crash tests. Press hardening can achieve significant reductions of sheet thickness at constant strength and is therefore a promising technology for the production of lightweight and energy-efficient automobiles. The manganese-boron steel 22MnB5 have been implemented in sheet press hardening owing to their excellent hot formability, high hardenability, and good temperability even at low cooling rates. However, press-hardened components have shown poor ductility and cracking at relatively small strains. A possible solution to this problem is a selective increase of steel sheet ductility by press hardening process design in areas where the component is required to deform plastically during crash tests. To this end, process designers require information about microstructure and mechanical properties as a function of the wide spectrum of cooling rates and sequences and austenitizing treatment conditions that can be encountered in production environments. In the present work, a Continuous Cooling Transformation (CCT) diagram with corresponding material properties of sheet steel 22MnB5 was determined for a wide spectrum of cooling rates. Heating and cooling programs were conducted in a quenching dilatometer. Motivated by the importance of residual elasticity in crash test performance, this property was measured using a micro-bending test and the results were integrated into the CCT diagrams to complement the hardness testing results. This information is essential for the process design of press hardening of sheet components with gradient material properties.

  13. Factors influencing the creep strength of hot pressed beryllium

    Webster, D.; Crooks, D.D.

    1975-01-01

    The parameters controlling the creep strength of hot pressed beryllium block have been determined. Creep strength was improved by a high initial dislocation density, a coarse grain size, and a low impurity content. The impurities most detrimental to creep strength were found to be aluminum, magnesium, and silicon. A uniform distribution of BeO was found to give creep strength which was inferior to a grain boundary distribution. The creep strength of very high purity, hot isostatically pressed beryllium was found to compare favorably with that of other more commonly used high temperature metals

  14. Vacuum hot pressing of titanium-alloy powders

    Malik, R.K.

    1975-01-01

    Full or nearly full dense products of wrought-metal properties have been obtained by vacuum hot pressing (VHP) of several prealloyed Ti--6Al--4V powders including hydride, hydride/dehydride, and rotating electrode process (REP) spherical powder. The properties of billets VHP from Ti--6Al--4V hydride powder and from hydride/dehydride powders have been shown to be equivalent. The REP spherical powder billets processed by VHP or by hot isostatic pressing (HIP) resulted in equivalent tensile properties. The potential of VHP for fabrication of near net aircraft parts such as complex fittings and engine disks offers considerable cost savings due to reduced material and machining requirements

  15. An analysis of Euroqol EQ-5D and Manchester Oxford Foot Questionnaire scores six months following podiatric surgery.

    Maher, Anthony J; Kilmartin, Timothy E

    2012-07-09

    In the United Kingdom patient-reported outcome measures (PROMS) have been adopted as a key measure of foot surgery outcomes. The intention of this study was to evaluate the responsiveness of a regional outcome measure; the Manchester Oxford Foot Questionnaire (MOXFQ) and a generic measure; the EuroQol EQ-5D, in the context of day care Podiatric Surgery. A prospective audit of 375 consecutive day care surgical admissions was undertaken. All patients attending for surgery, who agreed to participate, were included. Pre operation patients completed the MOXFQ and the EQ-5D. Both questionnaires were completed again at 6 months post operation. Additional data was collected on patient demographics, surgical procedures and complications. Few complications were encountered and most patients (84%) returned for a final review 6 months post operation. Mean MOXFQ scores improved for each domain: pain; 51.7 pre-operation, reduced to 16.5 post-operation, walking; 50.2 reduced to 14.1 and social interaction; 45.7 reduced to 10.6. The minimal clinically important differences (MCID) estimates for the pain domain were exceeded by 82.6% of patients, while 74.8% exceeded the MCID for walking and 68.5% exceeded the MCID for social interaction. A small number of patients (2.9%) deteriorated across all three MOXFQ domains.The EQ-5D Index, summary of health related quality of life, improved from 0.66 pre-operation to 0.86 post operation. The EQ-5D index MCID was exceeded by 79.2% of patients. Index scores deteriorated for 1.8% of patients following surgery. Effect sizes measured following surgery were largest for the MOXFQ domains: Walking; 1.39, Pain; 1.52 and Social Interaction: 1.39. The EQ-5D index effect size was 0.83. The EQ-5D visual analogue scale (VAS) was not influenced by surgery. Both the MOXFQ and EQ-5D index (but not the VAS) appear sensitive to changes in health status at 6 months following elective foot surgery. Both instruments were particularly responsive to changes

  16. Influence of the "Slingshot" bench press training aid on bench press kinematics and neuromuscular activity in competitive powerlifters.

    Dugdale, James H; Hunter, Angus; Di Virgilio, Thomas; Macgregor, Lewis J; Hamilton, D Lee

    2017-02-13

    This study examined the acute effects of the 'Slingshot' on bench-press performance, prime-mover surface electromyographic (sEMG) amplitude, and barbell velocity during maximal and submaximal bench-pressing in competitive male powerlifters. Fifteen male powerlifters (mean ± SD age: 27.05 ± 5.94 years; mass: 94.15kg; 1RM bench-press: 139.7 ± 16.79kg) participated in the study. Bench-press strength, average barbell velocity, and sEMG amplitude of the prime mover muscles (triceps brachii, pectoralis major and anterior deltoid) were measured during two conditions; 'Raw' (without use of any assistance) and 'Slingshot' [using the 'Slingshot' to perform both the weight achieved during 'Raw' 1RM testing (Raw max/SS), and absolute 1RM using the 'Slingshot' (SS)]. The results showed that the 'Slingshot' significantly increased bench press 1RM performance by a mean ± SD of 20.67kg ± 3.4kg. Barbell velocity and stick point analysis indicate that this improvement is likely driven by an increase in peak and pre-stick barbell velocity as triceps RMS was lower throughout all rep max phases with the 'Slingshot'. The 'Slingshot' also caused reductions in RMS, specifically of the triceps at all rep ranges but barbell velocity was better maintained in the last reps of all sets. These data indicate that the 'Slingshot' specifically de-loaded the triceps muscle throughout all rep ranges and provide assistance to maintaining barbell velocity under fatigue during later repetitions of multiple-repetition sets. The 'Slingshot' training aid could therefore be used in de-load phases of bench press training or as an over-reaching and velocity training aid.

  17. Equal channel angular pressing of pure aluminium—an analysis

    Abstract. Equal channel angular pressing (ECAP) is a novel technique for producing ultra fine grain struc- tures in submicron level by introducing a large amount of shear strain into the materials without changing the billet shape or dimensions. This process is well suited for aluminium alloys and is capable of producing ultra.

  18. EMG analysis and modelling of flat bench press using artificial ...

    The objective of this study was to evaluate the contribution of particular muscle groups during the Flat Bench Press (FBP) with different external loads. Additionally, the authors attempted to determine whether regression models or Artificial Neural Networks (ANNs) can predict FBP results more precisely and whether they can ...

  19. Democratic Socialism: Toward a Fifth Theory of the Press.

    Picard, Robert G.

    For more than 25 years, the "four theories" paradigm has been dominant in the study of the relationships among the press, society, and the state. Asserting that the major approaches to such study are the libertarian, social responsibility, authoritarian, and Soviet/communist theories, this paradigm fails to account for economic and…

  20. "...Establish the Student Press--And Stifle It!"

    McCallie, Franklin

    1990-01-01

    Presents an acceptance speech by Franklin McCallie, principal of Kirkwood High School (Missouri), for the "Administrator of the Year" award presented by the Missouri Interscholastic Press Association and the Missouri Journalism Education Association in April 1989. Discusses journalism's role in achieving the school's chief goals: student growth,…

  1. Picture This: 4-H Press Corps Builds Life Skills

    Clary, Christy D.

    2018-01-01

    A picture is worth a thousand words! Extension professionals are often looking for the picture that best captures an event and tells its story. Look beneath the surface, though, and a picture is worth much more. Developing a 4-H press corps results in a collection of useful photos but has the added benefit of providing 4-H members with an…

  2. Water holding capacity and enzymatic modification of pressed potato fibres

    Ramasamy, U.

    2014-01-01

    Cell wall polysaccharides (CWPs) contribute to the water holding capacity (WHC) of fibre rich feeds, such as pressed potato fibres (PPF). However, the role of CWPs on the WHC of PPF was unidentified so far.

    PPF was characterized to be abundant in arabinogalactan (AG) linked

  3. Quid pro quo: tobacco companies and the black press.

    McCandless, Phyra M; Yerger, Valerie B; Malone, Ruth E

    2012-04-01

    We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries.

  4. The nuclear issue in the cuban press. Challenges and realities

    Contreras Izquierdo, Marta; Rodriguez Guerra, Ingrids; Gonzalez Montoto, Iosbel; Fernandez Rondon, Manuel

    2005-01-01

    The work presents an analysis of the impact of nuclear issue on the Cuban press from 1990 to 2005 that was carried out by a group of communications specialists from nuclear area. An analysis of main challenges and actions of this group, aimed at informing the public the present situation of the Cuban nuclear programme and its perspectives, was also included

  5. Finishing procedures action on mechanical characteristics of pressed ceramics

    Mohamed Abdel Moniem Ahmed

    2018-06-01

    Conclusions& significance: Grinding & finishing procedures of pressed ceramics showed significant effect Of drill speed and polishing technique over flexural strength, As Grinding with no finishing and polishing procedure showed lowest flexural Strength values followed by finishing and polishing procedure followed by finishing and polishing with polishing paste procedure.

  6. Process considerations for hot pressing ceramic nuclear waste forms

    Wilson, C.N.; Brite, D.W.

    1981-01-01

    Spray calcined simulated ceramic nuclear waste powders were hot pressed in graphite, nickel-lined graphite and ZrO 2 -lined Al 2 O 3 dies. Densification, initial off-gas, waste element retention and pellet-die interactions were evaluated. Indicated process considerations and limitations are discussed. 15 figures

  7. Press Ideology and Organizational Control in Hong Kong.

    Chan, Joseph Man; Lee, Chin-Chuan

    1988-01-01

    Surveys the entire Chinese journalist population of Hong Kong to determine how news organizations in the highly politicized environment of Hong Kong exercise institutional control on recruitment and newswork. Finds that press ideology is a major determinant of its organizational control. (MS)

  8. Nanoindentation hardness of hot-pressed boron suboxide

    Machaka, Ronald; Derry, Trevor E.; Sigalas, Iakovos

    2011-01-01

    Highlights: → The load-displacement indentation response of hot-pressed B 6 O is measured and analysed. → The nanoindentation hardness of hot-pressed boron suboxide is reported. → An approach is developed to simulate multi-cycling loading load-displacement curves. → A comprehensive model inter-comparison study of the ISE in hot-pressed B 6 O is also presented. → The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.

  9. Press travel to the Mochovce power plant in Slovakia

    1998-07-01

    This press dossier gives, first, a general presentation of the Mochovce power plant of the republic of Slovakia (history, technical characteristics, safety aspects, technical particularities of VVER 440/213 reactors (safety analysis, recent improvements), financing of the modernization project). Then, the activities of the Framatome group in central and eastern Europe are presented (partnerships, cooperation agreements and contracts). (J.S.)

  10. Constitutional Provisions on the Press: A World View.

    Paraschos, Manny

    A study examined the legal treatment of the press in constitutions or other basic legal institutional documents from around the world. Sixty-three constitutions or basic documents from the Western World, the Communist Bloc, the Middle East, Africa, Southeast Asia, and Latin America were analyzed. Analysis revealed that most constitutions open with…

  11. A virtual model of the bench press exercise.

    Rahmani, Abderrahmane; Rambaud, Olivier; Bourdin, Muriel; Mariot, Jean-Pierre

    2009-08-07

    The objective of this study was to design and validate a three degrees of freedom model in the sagittal plane for the bench press exercise. The mechanical model was based on rigid segments connected by revolute and prismatic pairs, which enabled a kinematic approach and global force estimation. The method requires only three simple measurements: (i) horizontal position of the hand (x(0)); (ii) vertical displacement of the barbell (Z) and (iii) elbow angle (theta). Eight adult male throwers performed maximal concentric bench press exercises against different masses. The kinematic results showed that the vertical displacement of each segment and the global centre of mass followed the vertical displacement of the lifted mass. Consequently, the vertical velocity and acceleration of the combined centre of mass and the lifted mass were identical. Finally, for each lifted mass, there were no practical differences between forces calculated from the bench press model and those simultaneously measured with a force platform. The error was lower than 2.5%. The validity of the mechanical method was also highlighted by a standard error of the estimate (SEE) ranging from 2.0 to 6.6N in absolute terms, a coefficient of variation (CV) or =0.99 for all the lifts (pbench press exercises in both field and laboratory conditions.

  12. The Surrender of Tobruk in 1942: Press reports and soldiers ...

    The British and South African papers began to demand answers from politicians and military leaders for this shocking and unexpected catastrophe. The press ... Keywords: Prisoners of war (POWs), World War II, Union Defence Force, Erwin Rommel, Auchinleck, Ritchie, HB Klopper, South Africa, Eighth Army, Gazala ...

  13. Toward a Normative Theory of Freedom of the Press.

    Jensen, Dwight Wm.

    In considering the possibility of a normative theory of freedom of the press, this paper examines arguments about such freedom in the Third World and elsewhere. Some of the arguments discussed in the paper are derived from the theories of John Locke and Karl Marx; others are drawn from the concepts of divine rights, elitism, liberal democracy, and…

  14. Back-pressure Forging Using a Servo Press

    河本, 基一郎; Kawamoto, Kiichiro

    2015-01-01

    博士論文要旨Abstract 以下に掲載:International Journal of Automation Technology 9(2) pp.184-192 2015. Fuji Technology Press Ltd. 共著者:Kiichiro Kawamoto, Takeshi Yoneyama, Masato Okada

  15. Nanoindentation hardness of hot-pressed boron suboxide

    Machaka, Ronald, E-mail: Ronald.Machaka@wits.ac.za [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Derry, Trevor E. [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Physics, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Sigalas, Iakovos [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa)

    2011-07-15

    Highlights: {yields} The load-displacement indentation response of hot-pressed B{sub 6}O is measured and analysed. {yields} The nanoindentation hardness of hot-pressed boron suboxide is reported. {yields} An approach is developed to simulate multi-cycling loading load-displacement curves. {yields} A comprehensive model inter-comparison study of the ISE in hot-pressed B{sub 6}O is also presented. {yields} The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.

  16. Press-fit bipolar radial head arthroplasty, midterm results

    Kodde, Izaäk F.; Heijink, Andras; Kaas, Laurens; Mulder, Paul G. H.; van Dijk, C. Niek; Eygendaal, Denise

    2016-01-01

    Theoretical advantages of bipolar compared with monopolar radial head arthroplasty include better accommodation of radiocapitellar malalignment, reduction of capitellar abrasion, and reduction of stress at the bone-implant interfaces. Our purpose was to report the midterm results of press-fit

  17. Book Review: Stars (Copyright 1985, Golden Press; New York)

    Marigza, R. N., Jr.

    2009-06-01

    Stars is a part of the Golden Guides collection produced by Golden Press. It is a small 160 page paperback guide to the constellations, the sun, the moon, planets, and other celestial bodies. The book is convenient to carry along wherever you go, making it an easy to access reference material.

  18. Ethics and the Press: Readings in Mass Media Morality.

    Merrill, John C., Ed.; Barney, Ralph D., Ed.

    This collection of 35 articles addresses the topic of the ethical considerations and implications involved in reporting the news. Included in this book are such articles as: "Ethics and Journalism" by John Merrill, "Quality in Mass Communications" by Wilbur Schramm, "The American Press: Some Truths About Truths" by…

  19. MICROSTRUCTURAL ANALYSIS OF HOT ISOSTATICALLY PRESSED AL-SIC

    Bronsveld, P.M.; Hosson, J.Th. De; Sargent, M.A.; Alsem, W.H.M.

    1991-01-01

    The difference between extruded and hot isostatically pressed (HIP) Al6061 both with a T6 final heat treatment and with a 30 wt.% SiC particulate reinforcement is one of densification. The higher density of the HIP material is not translated into a stronger material. The Mg2Si precipitation is

  20. FREEDOM OF SPEECH IN INDONESIAN PRESS: INTERNATIONAL HUMAN RIGHTS PERSPECTIVE

    Clara Staples

    2016-06-01

    Full Text Available This paper will firstly examine the international framework of human rights law and its guidelines for safeguarding the right to freedom of speech in the press. Secondly, it will describe the constitutional and other legal rights protecting freedom of speech in Indonesia and assess their compatibility with the right to freedom of speech under the international human rights law framework. Thirdly it will consider the impact of Indonesia’s constitutional law and criminal and civil law, including sedition and defamation laws, and finally media ownership, on the interpretation and scope of the right to freedom of speech in the press. Consideration of these laws will be integrated with a discussion of judicial processes. This discussion will be used to determine how and in what circumstances the constitutional right to freedom of speech in the press may be facilitated or enabled, or on the other hand, limited, overridden or curtailed in Indonesia. Conclusions will then be drawn regarding the strengths and weaknesses of Indonesian laws in safeguarding the right to freedom of speech in the press and the democratic implications from an international human rights perspective. This inquiry will be restricted to Indonesian laws in existence during the post-New Order period of 1998 to the present, and to the information and analysis provided by English-language sources.

  1. The Press of the Soviet Union: A Bibliography.

    Bergethon, Bruce; And Others

    Compiled in response to the need for more information on the differences between the press systems of the United States and the Soviet Union, this bibliography contains 240 entries. Consisting of newspaper articles, journal articles, books, and pamphlets, the bibliography provides an overview of the different journalistic philosophies of the two…

  2. Student Press and Distribution Issues: Rights and Responsibilities.

    Bartlett, Larry D.

    1984-01-01

    This review analyzes case law in the area of student press and distribution and offers some guidelines for developing and implementing school policy and rules. Litigation is reviewed in order to clarify students' rights, limitations on administrative authority in matters of censorship and prior restraint, and actions in connection with writing and…

  3. Performing “responsibility” and “conspiracy” through press ...

    In 2003, the Australian cricketer Shane Warne was suspected and convicted of doping. The purpose of this article was to understand how he tried to resolve the problem/dilemma of being suspected and convicted of doping through three press statements, which he delivered to the media during the 2003 Cricket World Cup ...

  4. Pleurotus pulmonarius cultivation on amended palm press fibre waste

    In the last few decades, rapid global demand for edible oils has resulted in a significant increase in the land area of oil crop cultivation. In the process of extraction of palm oil from oil palm fruit, biomass materials such as palm pressed fibre (PPF) are generated as waste products. This research was undertaken to evaluate ...

  5. The Press, the Government, and the Ethics Vacuum.

    Merrill, John C.

    Immanuel Kant's idea of a will to do the right thing--to be ethical--is essentially a dead concept with both press and government. The reasons for this "ethics vacuum" are two-fold: the foundations of ethics in both circles are vague, confusing, and beset by relativism and pragmatism so that no system of ethics ever really coalesces; and neither…

  6. AMS radiocarbon dating at Oxford and its contribution to issues of the extinction of Neanderthals and the spread of Homo sapiens sapiens across Eurasia

    Pettitt, P B; Hedges, R E M; Hodgins, G W L

    2000-01-01

    The Oxford Radiocarbon Accelerator Unit has participated in a number of projects central to the question of the evolutionary fate of the Neanderthals and the spread of our own species across Eurasia. This paper outlines some of the key issues in this field and reports on some dating projects which have refined our knowledge of these momentous events in human history.

  7. AMS radiocarbon dating at Oxford and its contribution to issues of the extinction of Neanderthals and the spread of Homo sapiens sapiens across Eurasia

    Pettitt, P.B.; Bronk Ramsey, C.; Hedges, R.E.M.; Hodgins, G.W.L.

    2000-01-01

    The Oxford Radiocarbon Accelerator Unit has participated in a number of projects central to the question of the evolutionary fate of the Neanderthals and the spread of our own species across Eurasia. This paper outlines some of the key issues in this field and reports on some dating projects which have refined our knowledge of these momentous events in human history

  8. Evidence from the Oxford Classification cohort supports the clinical value of subclassification of focal segmental glomerulosclerosis in IgA nephropathy

    Bellur, Shubha S.; Lepeytre, Fanny; Vorobyeva, Olga; Troyanov, Stéphan; Cook, H. Terence; Roberts, Ian S. D.; Alpers, Charles E.; Amore, Alessandro; Barratt, Jonathan; Berthoux, Francois; Bonsib, Stephen; Bruijn, Jan A.; Cattran, Daniel C.; Coppo, Rosanna; D'Agati, Vivette; D'Amico, Giuseppe; Emancipator, Steven; Emma, Francesco; Feehally, John; Ferrario, Franco; Fervenza, Fernando C.; Florquin, Sandrine; Fogo, Agnes; Geddes, Colin C.; Groene, Hermann-Josef; Haas, Mark; Herzenberg, Andrew M.; Hill, Prue A.; Hogg, Ronald J.; Hsu, Stephen I.; Jennette, J. Charles; Joh, Kensuke; Julian, Bruce A.; Kawamura, Tetsuya; Lai, Fernand M.; Li, Lei-Shi; Li, Philip K. T.; Liu, Zhi-Hong; Mackinnon, Bruce; Mezzano, Sergio; Schena, F. Paolo; Tomino, Yasuhiko; Walker, Patrick D.; Wang, Haiyan; Weening, Jan J.; Yoshikawa, Nori; Zhang, Hong

    2017-01-01

    Focal segmental glomerulosclerosis (FSGS) is a common finding in IgA nephropathy (IgAN). Here we assessed FSGS lesions in the Oxford Classification patient cohort and correlated histology with clinical presentation and outcome to determine whether subclassification of the S score in IgAN is

  9. 'Where of is mad al mankynde' : an edition of and introduction to the twenty-four poems in Oxford, Bodleian Library, MS Digby 102

    Verheij, Louis Johan Philip

    2009-01-01

    'Where of is Mad al Mankynde' represents a new critical edition of the collection of twenty-four late-medieval anonymous poems contained, among other pieces, in Oxford, Bodleian Library, MS Digby 102. Each poem is introduced with a brief summary and closes with line-for-line explanatory comments.

  10. Don Quijote et Dulcinea, ou quand l’univers fictionnel interroge la réalité de l’amour

    Odile Lasserre Dempure

    2009-02-01

    Full Text Available Vaste mise en miroir d’une fiction qui n’en finit pas d’interroger son rapport ambigu au réel, le chef d’œuvre de Cervantès place le mouvement dialectique entre univers fictionnel et réalité au cœur même de son écriture. Au sein de cette dialectique, l’amour multiplement fictionnel de don Quichotte pour Dulcinée joue cependant un rôle majeur que ce travail se propose d’examiner. Lieu d’épanouissement privilégié d’un questionnement du rapport entre fiction et réalité, la mise en écriture de cet amour participe en effet de la vaste entreprise de révision des concepts menée par la pensée humaniste : c’est une exploration de la notion même d’amour, de sa réalité, de sa vérité, que permet le voyage au pays de l’amour auquel le Quichotte de Cervantès invite le lecteur.

  11. Finite element modelling and associated experimentations to optimize and predict the pressing cycle of a future AMBB manufacturing press

    Bayle, J.P.; Mezeix, P.; Tronche, E.; Delette, G.; Remy, E.; Picart, S.

    2014-01-01

    This study presents an approach based on the use of pellet forming numerical digital simulation which enables optimization of the die pressing cycle. Semi-empirical mechanical models were used in an FEM code, CAST3M. Specific powder characterizations were also performed to supply the mechanical parameters of compaction model. The methodology for the identification of five main coefficients (index flow, elastic and plastic parameters) was used with two different powders. The results show that the axial distribution of frictional forces may be changed during die pressing by a modification of the sequence of punch displacements. According to these results and the literature, the pressing cycle can be considered to have an influence on the shape of a sintered pellet through the axial distribution of green density. The process used for the identification of the Cam-Clay model coefficients seems to be in good agreement, even if the changes in certain parameters remain rather unclear and will require follow-up studies to confirm some of the results. The experimental device used produces good quality pellets, and the Radial Open Die Modulus remains the first choice for reduced pellet damage. Much work still remains to be done to fully define the identification process and create the most representative simulations possible before launching an industrial version of a nuclearized press, planned for the last quarter of year 2014. (authors)

  12. The Suburban Press; First Steps toward an Annotated Bibliography. Suburban Press Research Series No. 16 and 17.

    Northern Illinois Univ., De Kalb. Suburban Press Research Center.

    This bibliography lists journal articles concerning various aspects of the suburban press. Annotated selections, arranged alphabetically according to journal title, are gathered from the following periodicals: "Advertising Age,""Business Week,""Columbia Journalism Review,""Editor and Publisher,""Grassroots Editor,""Journalism…

  13. Pressing needs of biomedical text mining in biocuration and beyond: opportunities and challenges.

    Singhal, Ayush; Leaman, Robert; Catlett, Natalie; Lemberger, Thomas; McEntyre, Johanna; Polson, Shawn; Xenarios, Ioannis; Arighi, Cecilia; Lu, Zhiyong

    2016-01-01

    Text mining in the biomedical sciences is rapidly transitioning from small-scale evaluation to large-scale application. In this article, we argue that text-mining technologies have become essential tools in real-world biomedical research. We describe four large scale applications of text mining, as showcased during a recent panel discussion at the BioCreative V Challenge Workshop. We draw on these applications as case studies to characterize common requirements for successfully applying text-mining techniques to practical biocuration needs. We note that system 'accuracy' remains a challenge and identify several additional common difficulties and potential research directions including (i) the 'scalability' issue due to the increasing need of mining information from millions of full-text articles, (ii) the 'interoperability' issue of integrating various text-mining systems into existing curation workflows and (iii) the 'reusability' issue on the difficulty of applying trained systems to text genres that are not seen previously during development. We then describe related efforts within the text-mining community, with a special focus on the BioCreative series of challenge workshops. We believe that focusing on the near-term challenges identified in this work will amplify the opportunities afforded by the continued adoption of text-mining tools. Finally, in order to sustain the curation ecosystem and have text-mining systems adopted for practical benefits, we call for increased collaboration between text-mining researchers and various stakeholders, including researchers, publishers and biocurators. Published by Oxford University Press 2016. This work is written by US Government employees and is in the public domain in the US.

  14. The 13th International Workshop on H-mode Physics and Transport Barriers (Oxford, UK, 2011) The 13th International Workshop on H-mode Physics and Transport Barriers (Oxford, UK, 2011)

    Saibene, G.

    2012-11-01

    The 13th International Workshop on H-mode Physics and Transport Barriers, held in Lady Margaret Hall College in Oxford in October 2011 continues the tradition of bi-annual international meetings dedicated to the study of transport barriers in fusion plasmas. The first meeting of this series took place in S Diego (CA, US) in 1987, and since then scientists in the fusion community studying the formation and effects of transport barriers in plasmas have been meeting at this small workshop to discuss progress, new experimental evidence and related theoretical studies. The first workshops were strongly focussed on the characterization and understanding of the H-mode plasma, discovered in ASDEX in 1982. Tokamaks throughout the entire world were able to reproduce the H-mode transition in the following few years and since then the H-mode has been recognised as a pervasive physics feature of toroidally confined plasmas. Increased physics understanding of the H-mode transition and of the properties of H-mode plasmas, together with extensive development of diagnostic capabilities for the plasma edge, led to the development of edge transport barrier studies and theory. The H-mode Workshop reflected this extension in interest, with more and more contributions discussing the phenomenology of edge transport barriers and instabilities (ELMs), L-H transition and edge transport barrier formation theory. In the last 15 years, in response to the development of fusion plasma studies, the scientific scope of the workshop has been broadened to include experimental and theoretical studies of both edge and internal transport barriers, including formation and sustainment of transport barriers for different transport channels (energy, particle and momentum). The 13th H-mode Workshop was organized around six leading topics, and, as customary for this workshop, a lead speaker was selected for each topic to present to the audience the state-of-the-art, new understanding and open issues, as well

  15. Improving Dryer and Press Efficiencies Through Combustion of Hydrocarbon Emissions

    Sujit Banerjee

    2005-10-31

    Emission control devices on dryers and presses have been legislated into the industry, and are now an integral part of the drying system. These devices consume large quantities of natural gas and electricity and down-sizing or eliminating them will provide major energy savings. The principal strategy taken here focuses on developing process changes that should minimize (and in some cases eliminate) the need for controls. A second approach is to develop lower-cost control options. It has been shown in laboratory and full-scale work that Hazardous Air Pollutants (HAPs) emerge mainly at the end of the press cycle for particleboard, and, by extension, to other prod-ucts. Hence, only the air associated with this point of the cycle need be captured and treated. A model for estimating terpene emissions in the various zones of veneer dryers has been developed. This should allow the emissions to be concentrated in some zones and minimized in others, so that some of the air could be directly released without controls. Low-cost catalysts have been developed for controlling HAPs from dryers and presses. Catalysts conventionally used for regenerative catalytic oxidizers can be used at much lower temperatures for treating press emissions. Fluidized wood ash is an especially inexpensive mate-rial for efficiently reducing formaldehyde in dryer emissions. A heat transfer model for estimating pinene emissions from hot-pressing strand for the manufacture of flakeboard has been constructed from first principles and validated. The model shows that most of the emissions originate from the 1-mm layer of wood adjoining the platen surface. Hence, a simple control option is to surface a softwood mat with a layer of hardwood prior to pressing. Fines release a disproportionate large quantity of HAPs, and it has been shown both theo-retically and in full-scale work that particles smaller than 400 µm are principally responsible. Georgia-Pacific is considering green

  16. An Update of Freedom of the Press and Information in Latin America and the Caribbean.

    Garrison, Bruce; Munoz, Julio E.

    This paper is based on a review of the literature that included reports from the Inter-American Press Association's general assembly in Los Angeles in October 1984, the mid-year meeting of the Inter-American Press Association in Panama City in March 1985, and the 1983 world press freedom review of the International Press Institute. Other material…

  17. Effects of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses

    X.L. Luo; Junyong Zhu; Roland Gleisner; H.Y. Zhan

    2011-01-01

    This article reports the effect of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses. A wet cellulosic substrate of bleached kraft eucalyptus pulp and two wet sulfite-pretreated lignocellulosic substrates of aspen and lodgepole pine were pressed to various moisture (solids) contents by variation of pressing pressure and pressing...

  18. Hot pressing, strength, and fracture of calcium hexaboride

    Dutta, S.K.

    1975-01-01

    Fracture behavior and strength of hot-pressed CaB 6 were studied. The modulus of elasticity determined by attaching strain gages to the tensile surface of the bend bars to measure strain, was 55 +- 3 x 10 6 psi. The results are compared with values for other low density ceramic materials (B 4 C, SiB 6 , Be 4 B, AlB 12 ) in a table. The fracture mode was observed for both modulus of rupture and impact test specimens. Predominantly transgranular fracture, associated with distinct step cleavages is evident. Fracture origins were examined in an effort to understand the strength limiting features in hot-pressed CaB 6 specimens. Surface defects, large grain agglomerations, and isolated pore pockets were observed and varied from bar to bar; these were similar to those found in B 4 C. (U.S.)

  19. Pressing Speed, Specific Pressure and Mechanical Properties of Aluminium Cast

    Gaspar S.

    2016-06-01

    Full Text Available Recent research in the process of aluminum alloy die castings production, which is nowadays deeply implemented into the rapidly growing automobile, shipping and aircraft industries, is aimed at increasing the useful qualitative properties of the die casting in order to obtain its high mechanical properties at acceptable economic cost. Problem of technological factors of high pressure die casting has been a subject of worldwide research (EU, US, Japan, etc.. The final performance properties of die castings are subjected to a large number of technological factors. The main technological factors of high pressure die casting are as follows: plunger pressing speed, specific (increase pressure, mold temperature as well as alloy temperature. The contribution discusses the impact of the plunger pressing speed and specific (increase pressure on the mechanical properties of the casting aluminum alloy.

  20. Research on the Visual Processing System of the Punch Press

    Sun Xuan

    2016-01-01

    Full Text Available Most of raw materials of small hardware processing for plate scraps, and it’s realized through the manual operation of ordinary punch, which way has the low production efficiency and the high labor intensity. In order to improve the automation level of production, developing and designing of a visual processing system for punch press manipulator which based on the MFC tools of Visual Studio software platform. Through the image acquisition and image processing, get the information about the board to be processed, such as shape, length, the center of gravity position and pose, and providing relevant parameters for positioning gripping and placing into the punch table positioning of the feeding manipulator and automatic programming of punching machine, so as to realize the automatic operation about press feeding and processing.

  1. Social Representations of the Environment in Press Media

    Gislei Mocelin Polli

    2015-08-01

    Full Text Available Environmental issues are given prominence in the media and scientific circles. From the 60’s until early 2010 there were changes in the way people related to the environment, with a paradigm shift occurring regarding the environment. This study sought to identify the representational content disseminated by the press media on the environment in different periods. A qualitative survey was therefore conducted of documents, and data were obtained through texts published in a magazine with national circulation. The data were analyzed using the ALCESTE program with a Lexicographic Analysis. It was identified that the press media reflects the paradigm shifts, and publications dating from the late 60’s are compatible with the old paradigm, evolving over time, and are now compatible with the new environmental paradigm. The results indicate that currently the environment needs care in all its aspects and lack of care creates global impacts.

  2. News from the Library: newspapers anyone? Try PressDisplay!

    CERN Library

    2011-01-01

    PressDisplay is an online portal where you can browse and read online articles from more than 1,900 newspapers from 95 countries, as soon as they are published. With Pressdisplay, the time when newspapers were nicely displayed on wooden rods in libraries has passed...   Le Monde, International Herald Tribune and many more titles are displayed in their original layout including text and images, and you can print and e-mail the articles you are interested in. You even have the possibility to create rss feeds, so that the news reaches you directly.   The CERN Library has now activated a trial version of PressDisplay valid till 31 December; it is open to everyone at CERN. This trial doesn't offer the possibility to create personalised alerts based on specific search criteria. In case you need such features - or if you have any comments or questions - please contact us.

  3. Reducing VOC Press Emission from OSB Manufacturing; FINAL

    Gary D, McGinnis; Laura S, WIlliams; Amy E, Monte; Jagdish Rughani; Brett A, Niemi; Thomas M, Flicker

    2001-01-01

    Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board

  4. Indonesian journalistic competitions: tribute or threat for press practice

    Dewi, P. A. R.; Aji, G. G.; Sukardani, P. S.

    2018-01-01

    This research aims to Investigate journalists’ understanding toward glittering generalities practice - positive and good coverage of the caused by the Journalistic contests, the prices are attracting them, Reviews their motives to Participate, and their beliefs about ethics al thing. It is also retrieve how the chief editor, as a decision maker in the mass media taking his responsibility on the glittering news. This research uses a case study method by conducting indepth interviews on journalists, editors, and professional the alliance to collect the data and analyse it based on critical paradigm. The results show that journalist believe that competition is good, and there is no violation as long as the stick to the press code of conduct, but for chief editors and professional alliance, they begin to aware the damage of the contest. The findings of this work will be valuable to develop critical thinking of press workers and promote awareness to the society to control the media practice.

  5. A new cleaner process to prepare pressing-powder

    Shu, Z.

    2011-10-01

    Full Text Available An alternative cleaner process of pressing-powder preparation, based on filter-pressing and a novel granulation method, is presented to substitute the existing spray-drying process. In the new process, about two-thirds of wet-milled slurry is filterpressed, dried and milled into dry fine powder. The other one-third of the slurry and the as-obtained dry fine powder are spray-mixed in a tower, where the slurry droplets adsorb the dry powder to form granules which are then rolled and dried into a useable pressing-powder for tile pressing. The key stages, filter-pressing and granulation (consisting of spray-mixing and rolling treatment, are specially studied. The pressing-powder properties and pressing/firing behavior, and, energy/water consumption and pollution emission data are presented, and a comparison between the new process and the existing spray-drying process is made. This new process has been found to be feasible and provides a pressing-powder with suitable properties, together with lower energy/water consumption and pollution emission (particulate matter and CO2.

    En ese trabajo se presenta un proceso alternativo y más ecológico para la preparación de polvo de prensas por molienda vía húmeda de las materias primas. En este proceso la eliminación del agua de la suspensión obtenida en la etapa de molienda, en vez de realizarse por secado por atomización, se lleva a cabo en dos etapas, en una primera etapa dos tercios de esta suspensión se filtro-prensan, posteriormente se secan y molturan hasta obtener un polvo seco micronizado. Este material seco se introduce por la parte superior de una torre granuladora, en la que se pulveriza el tercio de la suspensión restante por la parte inferior, de forma que las gotas adsorben sobre su superficie las partículas secas formando gránulos, que posteriormente se compactan por rodamiento (“rolling”, y finalmente se secan hasta la humedad requerida para el prensado. En

  6. Different Visions of Framing Violence in International Press News

    Ramirez, Jacobo

    in Mexico and to explore entrepreneurs’ reaction to the covered news. We also analyze journalists’ treatment of this news (Semetko & Valkendurg, 2000) and differences among newspapers from the U.S., Mexico and the European Union (EU). A sample of 200 news histories was constructed by integrating...... international and Mexican newspapers from 2006 to 2012. Our results showed that overall, U.S. and EU newspapers present more news related to violence towards entrepreneurs than Mexican outlets, which more often adopt the avoid strategy (Oliver, 1991). The conflict frame was more widely used in EU newspapers...... than in U.S. and Mexican newspapers, and the economic frame was more present in the U.S. and Mexican press than in the EU press. The morality frame was used more frequently by Mexican journalists than U.S. and European journalists. The results made it possible to observe the effects of framing...

  7. Visual impact in the digital press: a Spanish empirical research

    Joan Francesc Fondevila Gascón

    2010-12-01

    Full Text Available Visual resource (photography and video inclusion in digital journalism is obtaining importance in the multimedia area. The principal resources of digital press are multimedia, hypertext and interactivity. Multimedia is in an initial process of evolution. The objective of this research is to observe empirically the use of visual resources by the digital pure player press. These media try to take advantage of the new multimedia possibilities in the development and presentation of the contents. We have analyzed empirically video and photography inclusion in the multimedia framework (text, photography, video, audio, infograph and animation programs in four digital newspapers (Libertad Digital and El Plural, in Spanish, and Vilaweb.cat and e-Noticies, in Catalan analyzed according to journalistic genres.

  8. Convicted Murderers and the Victorian Press: Condemnation vs. Sympathy

    Martin J. Wiener

    2007-11-01

    Full Text Available Almost half of those receiving the death sentence in late-Victorian and Edwardian England were reprieved. The process of deciding which murderers were to hang and which were to be spared became an increasingly public one, thanks to the growing intervention of the press. This intervention grew alongside the accelerated expansion in the numbers and circulations of newspapers in the second half of the nineteenth century. As the press became a larger part of national life, its more „popular‟ and its more local segments carved out for themselves a new and ever more prominent role as major participants in public discourse over „justice‟ vs. „mercy‟ for condemned murderers. This involvement is a facet of Victorian and Edwardian newspapers that has previously been overlooked.

  9. Hot Isostatic Press (HIP) vitrification of radwaste concretes

    Siemer, D.D.; Scheetz, B.; Gougar, M.L.D.

    1995-01-01

    Properly formulated and properly ''canned'' radwaste concretes can be readily hot-isostatically-pressed (HIPed) into materials that exhibit performance equivalent to typical radwaste-type glasses. The HIPing conditions (temperature/pressure) required to turn a concrete waste form into a ''vitrified'' waste form are quite mild and therefore consistent with both safety and high productivity. This paper describes the process and its products with reference to its potential application to Idaho Chemical Processing Plant (ICPP) reprocessing wastes

  10. Mediated Nationalism: Press Freedom, Mass Media, and Nationalism

    2017-12-01

    spread propaganda resulted in a positive response by listeners who were predisposed to anti-Semitism and a negative response by those whose prior...2016/jun/11/ david-cameron-brexit-eu-referendum- listen -jeremy-corbyn. 5 Nations with a censored press would likely have denied the expression of...nationalism. Those “who can understand them, or can acquire such comprehension is included in a moral and economic community.”45 He states that “what is

  11. Biological effects of the ionizing radiation. Press breakfast

    Flury-Herard, A.; Boiteux, S.; Dutrillaux, B.; Toledano, M.

    2000-06-01

    This document brings together the subjects discussed during the Press breakfast of 29 june 2000 on the biological effects of the ionizing radiations, with scientists of the CEA and the CNRS. It presents the research programs and provides inquiries on the NDA operating to introduce the NDA damages by ionizing radiations, the possible repairs and the repair efficiency facing the carcinogenesis. Those researches allow the scientists to define laws on radiation protection. (A.L.B.)

  12. FREEDOM OF SPEECH IN INDONESIAN PRESS: INTERNATIONAL HUMAN RIGHTS PERSPECTIVE

    Clara Staples

    2016-01-01

    This paper will firstly examine the International framework of human rights law and its guidelines for safeguarding the right to freedom of speech in the press. Secondly, it will describe the constitutional and other legal rights protecting freedom of speech in Indonesia and assess their compatibility with the right to freedom of speech under the International human rights law framework. Thirdly it will consider the impact of Indonesia's constitutional law and criminal and civil law, includin...

  13. Mechanical and thermophysical properties of hot-pressed SYNROC B

    Hoenig, C.L.; Newkirk, H.W.; Otto, R.A.; Brady, R.L.; Brown, A.E.; Ulrich, A.R.; Lum, R.C.

    1981-01-01

    The optimal SYNROC compositons for use with commercial waste are reviewed. Large amounts of powder (about 2.5 kg) were prepared by convention al ceramic operations to test the SYNROC concept on a processing scale. Samples, 15.2 cm in diameter, were hot pressed in graphite, and representative samples were cut for microstructural evaluations. Measured mechanical and thermophysical properties did not vary significantly as a function of sample location and were typical of titanate ceramic materials

  14. Film Advertising in the Albanian Press before World War II

    Vjollca Hysi Panajoti; Mirdaim Axhami; Loreta Zela Axhami

    2015-01-01

    This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the ...

  15. The Social Theories of the press: journalism and society

    Beatriz Marocco

    2005-06-01

    Full Text Available For a short period of time, between the end of the 19th century and the middle of the 20th, newspapers and journalists were under the spotlight as never before. However, the comprehensive reviews of the theories of the press do not acknowledge the thought of this period and its development into “the social theories of the press” (H. Hardt, 1979. This article is positioned in this gap of press studies, and it uses as a starting point the foucaultian description of the diff erent thresholds that establish the levels of discourse elaboration (Foucault, 1995. It aims at exploring the theoretical production that approximates German and American scholars such as Albert Schäffle (1831-1903; Karl Knies (1821-1898; Karl Bücher (1847-1930; Ferdinand Tönnies (1835-1936; Albion Small (1854-1926; Edward Ross (1856-1951; Max Weber (1864-1920; Robert Park (1864-1944 and Walter Lippmann (1889-1974, rescuing this production from the pre-history of the press to materialize evidence that this production coincides, in its external origin, with the modern newspaper practices, although there seemed to be no dependence between them at the time.

  16. The Social Theories of the press: journalism and society

    Beatriz Marocco

    2011-02-01

    Full Text Available For a short period of time, between the end of the 19th century and the middle of the 20th, newspapers and journalists were under the spotlight as never before. However, the comprehensive reviews of the theories of the press do not acknowledge the thought of this period and its development into “the social theories of the press” (H. Hardt, 1979. This article is positioned in this gap of press studies, and it uses as a starting point the foucaultian description of the diff erent thresholds that establish the levels of discourse elaboration (Foucault, 1995. It aims at exploring the theoretical production that approximates German and American scholars such as Albert Schäffle (1831-1903; Karl Knies (1821-1898; Karl Bücher (1847-1930; Ferdinand Tönnies (1835-1936; Albion Small (1854-1926; Edward Ross (1856-1951; Max Weber (1864-1920; Robert Park (1864-1944 and Walter Lippmann (1889-1974, rescuing this production from the pre-history of the press to materialize evidence that this production coincides, in its external origin, with the modern newspaper practices, although there seemed to be no dependence between them at the time.

  17. Graphite and boron carbide composites made by hot-pressing

    Miyazaki, K.; Hagio, T.; Kobayashi, K.

    1981-01-01

    Composites consisting of graphite and boron carbide were made by hot-pressing mixed powders of coke carbon and boron carbide. The change of relative density, mechanical strength and electrical resistivity of the composites and the X-ray parameters of coke carbon were investigated with increase of boron carbide content and hot-pressing temperature. From these experiments, it was found that boron carbide powder has a remarkable effect on sintering and graphitization of coke carbon powder above the hot-pressing temperature of 2000 0 C. At 2200 0 C, electrical resistivity of the composite and d(002) spacing of coke carbon once showed minimum values at about 5 to 10 wt% boron carbide and then increased. The strength of the composite increased with increase of boron carbide content. It was considered that some boron from boron carbide began to diffuse substitutionally into the graphite structure above 2000 0 C and densification and graphitization were promoted with the diffusion of boron. Improvements could be made to the mechanical strength, density, oxidation resistance and manufacturing methods by comparing with the properties and processes of conventional graphites. (author)

  18. Production of press moulds by plasma spray forming process

    Borisov, Y.; Myakota, I.; Polyakov, S.

    2001-01-01

    Plasma spray forming process for production of press moulds which are used for manufacture of articles from plastics was developed. The press moulds were produced by plasma spraying of Cu-Al-Fe-alloy powder on surface of a master model. The master models were made from non-metallic materials with heat resistance below 70 C (wood, gypsum etc). Double cooling system which provides for a control of surface model temperature and quenching conditions of sprayed material was designed. It made possible on the one hand to support model surface temperature below 70 C and on the other hand to provide for temperature conditions of martensite transformation in Cu-Al-system with a fixation of metastable ductile α + β 1 -phase. This allowed to decrease residual stresses in sprayed layer (up to 0,5-2,5 MPa), to increase microhardness of the coating material (up to 1200-1800 MPa) and its ductility (σ B = 70-105 MPa, δ = 6-12 %). This plasma spray forming process makes possible to spray thick layers (5-20 mm and more) without their cracking and deformation. The process is used for a production of press moulds which are applied in shoes industry, for fabrication of toys, souvenirs etc. (author)

  19. Research Facility for Mechanical Press Closed Gap Adjuster

    A. A. Ancifirov

    2016-01-01

    Full Text Available The article describes an example of the research facility for closed gap adjustment mechanism based on the KD2128 closed-die forging press. Its rated force with a servo drive used is 630kN. The servo drive consists of a motor with nominal power of 1.57kW and a frequency converter with power of 7.5kW, which has functions of the programmable logic controller.The article notes that such a facility is expedient and useful for practical classes on forging-andstamping machines at the BMSTU Department of «Technology processing by pressure» to demonstrate the capabilities of existing technological facility, learn a design of forging-andstamping machine units, solve the problems of automatic control, monitoring, and diagnostics in blank manufacturing.The article presents a detailed facility diagram of the closed gap adjustment mechanism and its photograph, describes the mechanism and its basic parameters, gives characteristics of the synchronous motor to drive the mechanism, reviews practical works, which the research facility may provide.Based on the four experiments the article estimates an efficiency of the research facilityuse under consideration, especially when modeling a servo motor shaft under the maximum load. The relevant diagrams confirm experimental results, namely: control current, angle of motor shaft and its speed versus time. Thus, upon the diagram analysis it can be noted that the research facility design allows providing kinematics and dynamics of the press closed gap adjuster.This article describes how to determine the closed gap adjusting accuracy of the press. Eight experiments have been conducted to evaluate a working out control signal to the linear movement of the press punch when using the research facility. It is noted that the linear positioning accuracy of the press punch reaches the hundredth parts of a millimeter of the adjustment value that is sufficient to achieve the required precision when performing operations such as

  20. Learning lessons from the past: A historical exploration of a century of business education at Oxford and Cambridge (1900s-2000s)

    Arena , Lise; Dang , Rani Jeanne

    2010-01-01

    This research aims to identify a set of generative mechanisms which are shared by business schools' process of development in their search for strategic comparative advantage. We use a processual approach (Pettigrew, 1997) based on two detailed historical studies supported by unexplored archival data and interviews: the case of the Saïd Business School at the University of Oxford and the case of the Judge Business School at the University of Cambridge (1990s - 2000s). Preliminary results indi...

  1. Validation of a prediction model that allows direct comparison of the Oxford Knee Score and American Knee Society clinical rating system.

    Maempel, J F; Clement, N D; Brenkel, I J; Walmsley, P J

    2015-04-01

    This study demonstrates a significant correlation between the American Knee Society (AKS) Clinical Rating System and the Oxford Knee Score (OKS) and provides a validated prediction tool to estimate score conversion. A total of 1022 patients were prospectively clinically assessed five years after TKR and completed AKS assessments and an OKS questionnaire. Multivariate regression analysis demonstrated significant correlations between OKS and the AKS knee and function scores but a stronger correlation (r = 0.68, p Society of Bone & Joint Surgery.

  2. Sensing Emotion in Voices: Negativity Bias and Gender Differences in a Validation Study of the Oxford Vocal (?OxVoc?) Sounds Database

    Young, Katherine S.; Parsons, Christine E.; LeBeau, Richard T.; Tabak, Benjamin A.; Sewart, Amy R.; Stein, Alan; Kringelbach, Morten L.; Craske, Michelle G.

    2016-01-01

    Emotional expressions are an essential element of human interactions. Recent work has increasingly recognized that emotional vocalizations can color and shape interactions between individuals. Here we present data on the psychometric properties of a recently developed database of authentic nonlinguistic emotional vocalizations from human adults and infants (the Oxford Vocal 'OxVoc' Sounds Database; Parsons, Young, Craske, Stein, & Kringelbach, 2014). In a large sample (n = 562), we demonstrat...

  3. The antimatter. Press breakfast 23 may 2000; L'antimatiere. Petit dejeuner de presse 23 mai 2000

    Spiro, M; Dejardin, M; Debu, P; Aleksan, R [CEA/Saclay, Dept. d' Astrophysique, de la Physique des Particules, de la Physique Nucleaire et de l' Instrumentation Associee (DAPNIA), 91 - Gif-sur-Yvette (France)

    2000-05-01

    This document brings together the subjects discussed during the Press breakfast of 23 may 2000 on the antimatter, with scientists of the CEA and the CNRS. It presents the research programs and the experiments on the antimatter and the symmetry violation: the CP LEAR and the NA48 experiments at CERN, the BaBar detector at SLAC, the fundamental research at the CEA and the impacts on the energy policy. It provides also links for more detailed inquiries. (A.L.B.)

  4. Biological effects of the ionizing radiation. Press breakfast; Effets biologiques des rayonnements ionisants. Petit dejeuner de presse

    Flury-Herard, A [CEA, Direction des Sciences du Vivant, DSV, 75 - Paris (France); Boiteux, S; Dutrillaux, B [CEA/Fontenay-aux-Roses, Direction des Sciences du Vivant, DSV, 92 (France); Toledano, M [CEA Saclay, Direction des Sciences du Vivant, DSV, 91 - Gif-sur-Yvette (France)

    2000-06-01

    This document brings together the subjects discussed during the Press breakfast of 29 june 2000 on the biological effects of the ionizing radiations, with scientists of the CEA and the CNRS. It presents the research programs and provides inquiries on the NDA operating to introduce the NDA damages by ionizing radiations, the possible repairs and the repair efficiency facing the carcinogenesis. Those researches allow the scientists to define laws on radiation protection. (A.L.B.)

  5. SOFTWARE REVIEW: Oxford Personal Revision Guides: A-level Physics 1999/2000 Syllabus GCSE Physics 1999/2000 Syllabus

    Parker, Kerry

    2000-09-01

    Is it any better than a textbook and a pad of A4 paper? That's the question we have to ask if we consider investing in a `Revision' CD-ROM. Of course, nothing, in our lifetimes, will quite replace the students' own notes, some paper and a pencil. But, so far as private study is concerned, the computer offers a number of potential advantages: sound, animation, hyperlinks, interactivity, a calculator and a clock. For those with a modem, we can add Internet connections too. A few years ago the only revision materials available for computers were simply electronic versions of textbooks: a few animations and voice commentaries, with maybe a few multiple choice tests was the best you could expect. I was universally disappointed with all such CD-ROMs; they were a waste of money. At last things are changing and theseOxford Personal Revision Guides are definitely software of the new generation: there is commentary, there are animated diagrams (ripple tanks, Hertzsprung-Russell diagrams, falling stones...), there are plenty of hyperlinks to other sections of the CD, and to exam board websites on the Internet, so that students can check their own syllabus.... This CD is not a rip-off! The software uses Microscoft Internet Explorer to produce a screen that looks as if you are connected to the Internet. Few students will have any problems in navigating the system. It is a massive piece of programming requiring a fairly modern PC (Pentium 166, 32 MB RAM, quad-speed CD-ROM drive and a good monitor and sound card really are the minimum; I loaded the programme on an older machine and it struggled!). Installation took a good while because the software insists on installing/updating Internet Explorer to 5.0 and checking for, and loading if necessary, Real Player 7, Microsoft Java Virtual Machine and Macromedia Shockwave 7.0.2 Player. Once all this was loaded it worked extremely well, and at first I kept imagining that I was in fact connected to a fantastic educational site on the web

  6. On the Issue of a Narrow Dating of the Manuscript of the Treaties De Cerimoniis Aulae Byzantinae (Leipzig, Univ. Bibl. Rep. I 17

    Marina A. Kurysheva

    2017-11-01

    Full Text Available The paper offers new arguments for the more exact dating – autumn-winter of 963 – of the manuscript of the treatise De cerimoniis aulae byzantinae (Leipzig, Univ. Bibl. Rep. I 17. At the end of the list of the tombs of the emperors in the Mausoleum of Constantine the Great in the Church of the Holy Apostles, included in this compilation treatise, the scribe missed three empty lines. The last emperor in the list of buried emperors is Constantine VII Porphyrogenitus; there is no sarcophagus of his son Roman II, known from the later lists of tombs. The list ends with a mention of the “small sarcophagus” (τὸ λαρνάκιον; and there is no indication, whether there was someone buried there. Judging by the chronicles of Yahya of Antioch and Leo Deacon, as well as The Brief History by Michael Psellos, since the death of Emperor Roman II there was a constant danger of the liquidation of his children – Basil, Constantine and Anna. Apparently, this small coffin was prepared for them, and the scribe of the codex left a place to finish the final distribution of the last representatives of the imperial house in the mausoleum. However, all the children saved their lives, and three blank lines in the manuscript were never filled. Consequently, the manuscript was already completed after August 16, 963, and it is unlikely that the work on it was completed much later than the autumn-winter of 963.

  7. Reference Aid: Glossary of Acronyms, Abbreviations, and Special Terms Used in the Western Europe Romance-Language Press.

    1977-11-25

    Artistic Agency for Cultural Exchange (Fr) Ground Forces Tactical Air Support (Fr) Association for the Struggle Against Kidney Diseases (Spa...Union for the New Republic (Fr) National Union of Italian Univer- sity Representa- tives (Ita) Popular Unity (Ita) Peoples Artist Union (Spa...of beiges Societes Luxembourg Luxembour- Gymnastic Socie- geoises de ties (Lux) Gymnastique 124 uso Union Workers Trade Sindical Union (Spa

  8. United States Air Force Summer Faculty Research Program 1989. Program Technical Report. Volume 3

    1989-12-01

    351-2807 R. H. Cofer Degree: PhD Professor Specialty: Electrical Eng. Florida Institute Assigned: Avionics Laboratory 150 W. University Blvd. Melbourne ...West University Blvd. Melbourne , FL 32901 407\\768-8000 Ernest Hallford Degree: PhD Assistant Prof. Specialty: Psychology Moorhead State Univ. Assigned...3. Henisch, Heinz K., Semiconductor Contacts: An Approach to Ideas and Models, Oxford, England, Clarendon Press, 1984. 118-15 1989 USAF-UES SUMMER

  9. Developing an Effective and Efficient Real Time Strategy Agent for Use as a Computer Generated Force

    2010-03-01

    Coello, Carlos A., Gary B. Lamont, and David A. Van Veldhuizen . Evolution- ary Algorithms for Solving Multi-Objective Problems (Genetic and...Practice. Oxford Univer- sity Press, 1996. 4. Bakkes, Sander, Philip Kerbusch, Pieter Spronck, and Jaap van den Herik. “Au- tomatically Evaluating...Pieter Spronck, and Jaap van den Herik. “Phase-dependent Evaluation in RTS games”. Proceedings of the 19th Belgian-Dutch Conference on Artificial

  10. Results and problems in the development of machines employed in pressing technology

    Dietrich, P; Hinne, H; Linke, L; Nerger, R

    1980-08-01

    Features specifications and technical improvements of nine GDR made briquetting presses from the Zemag Zeitz company. Briquetting presses have been produced by the company for more than 100 years, the present capacity of the machines ranges from 5.1 t/h to 20.4 t/h of nominal briquet production. Development trends are directed toward larger presses. The prototype PSA 400, based on the design of the four channel press PSA 300, will be tested in industrial operation during 1980/81. Various technical details on the general briquetting press design are enumerated, including experiences gained with steam or electric power operated presses, regulation of the pressing speed with a patented switch gear system, maintenance of crank gear bearings, greasing of steam driven presses, investigation of crack damages to the machine block, further measures for reducing wear of the pressing channel and mechanized welding methods for the channel overhaul. (In German)

  11. Clarification of Orange Press Liquors by PVDF Hollow Fiber Membranes

    Silvia Simone

    2016-01-01

    Full Text Available Press liquors are typical by-products of the citrus juice processing characterized by a high content of organic compounds and associated problems of environmental impact, which imply high treatment costs. However, these wastes contain a great number of health promoting substances, including fibers, carotenoids and phenolic compounds (mainly flavonoids, whose recovery against waste-destruction technologies is very attractive for new business opportunities. In this work, the clarification of orange press liquor by using microfiltration (MF membranes is studied as a preliminary step to obtain a permeate stream enriched in antioxidant compounds which can be further processed to produce extracts of nutraceutical and/or pharmaceutical interest. MF poly(vinylidene fluoride (PVDF hollow fibers were prepared by the dry/wet spinning technique. A series of fibers was produced from the same polymeric dope, in order to investigate the effect of selected spinning parameters, i.e., bore fluid composition and flowrate, on their properties. The morphology of the produced fibers was analyzed by Scanning Electron Microscopy (SEM. Fibers were further characterized for their mechanical properties, porosity, bubble point, pore size distribution and pure water permeability (PWP. Some of the produced fibers exhibited high permeability (pure water permeability ~530 L/m2·h·bar, coupled to good mechanical resistance and pore size in the range of MF membranes. These fibers were selected and used for the clarification of press liquor from orange peel processing. In optimized operating conditions, the selected fibers produced steady-state fluxes of about 41 L/m2·h with rejections towards polyphenols and total antioxidant activity of 4.1% and 1.4%, respectively.

  12. Mechanical Properties of Copper Processed by Equal Channel Angular Pressing

    Sülleiová, K.; Ballóková, B.; Besterci, M.; Kvačkaj, T.

    2017-12-01

    The development of the nanostructure in commercial pure copper and the strength and ductility after severe plastic deformation (SPD) with the technology of equal channel angular pressing (ECAP) are analysed. Experimental results and analyses showed that both strength and ductility can be increased simultaneously by SPD. The final grain size decreased from the initial 50μm by SPD to 100-300 nm after 10 passes. An increase of the ductility together with an increase of strength caused by SPD are explained by a strong grain refinement and by a dynamic equilibrium of weakening and strengthening, and it is visible on the final static tensile test stress-strain charts.

  13. NIC (Nuclear Industry in China) exhibition. Press file

    1998-01-01

    Framatome participated to the NIC exhibition which took place in Beijing (China) on March 1998. This press dossier was distributed to visitors. It presents in a first part the activities of the Framatome group in people's republic of China (new constructions (Daya Bay, Ling Ao project), technological cooperation and contracts in the nuclear domain, technology transfers in the domain of nuclear fuels, activities and daughter companies in the domain of industrial equipments, Framatome Connectors International (FCI) daughter company in the domain of connectors engineering). Then, the general activities of Framatome in the nuclear, industrial equipment, and connectors engineering domains are summarized in the next 3 parts. (J.S.)

  14. The pressing energy innovation challenge of the US National Laboratories

    Anadon, Laura Diaz; Chan, Gabriel; Bin-Nun, Amitai Y.; Narayanamurti, Venkatesh

    2016-10-01

    Accelerating the development and deployment of energy technologies is a pressing challenge. Doing so will require policy reform that improves the efficacy of public research organizations and strengthens the links between public and private innovators. With their US$14 billion annual budget and unique mandates, the US National Laboratories have the potential to critically advance energy innovation, yet reviews of their performance find several areas of weak organizational design. Here, we discuss the challenges the National Laboratories face in engaging the private sector, increasing their contributions to transformative research, and developing culture and management practices to better support innovation. We also offer recommendations for how policymakers can address these challenges.

  15. Press Manipulation and Its Negative Impact on the Youth

    Ioana Manea

    2010-12-01

    Full Text Available Nowadays, manipulation may be regarded as an essential instrument of the “mass industrial society”, aiming at the conclusion of certain agreements that are convenient to the issuing party, turning to deceit with falsified arguments, as well as to appeals to emotional or non-rational components. The particular forms that it takes in various fields of social life may be found anywhere, from the political form to the economic one. Press strategies have the capacity of manipulating the young consumer’s behaviour, generating numerous negative effects on their everyday life.

  16. Clay characterization for making pressed and burned blocks

    Alexandre, J.; Silva, C.L. de A.P. e

    2012-01-01

    The municipality of Campos dos Goytacazes, located in the state of Rio de Janeiro, at 275 km from the capital, are the largest industrial ceramic state and he has over 100 unionized industries. The production of these industries is based on tiles, building blocks and bricks. Seeking the improvement and diversification of production, the North Fluminense State University has 18 years working in partnership with local industry, with students and teachers. One of the researches is the production of blocks pressed and burned. In this work are presented in many lab tests performed, morphology and some of technological properties. (author)

  17. [Cigarette and alcohol advertising in the Swiss free press].

    Olivier, Jacques

    2014-11-26

    Tobacco and alcohol are ordinary consumer goods that are still two overriding preventable causes of death in Switzerland. Massive advertising supports their selling and contributes to maintain a major public health problem up to date. The widely read free press represents an interesting advertising mean. The study of tobacco and alcohol advertisements published in the free newspaper 20 minutes through the year 2012 gives us a good idea of these products' advertising strategies. Compared to those for alcohol, the cigarette advertisements are more numerous, more suggestive and dealing with emotions. The themes proposed respond to young people's expectations in order to incline them to smoke, whereas positive images encourage to keep on smoking.

  18. Hot pressing of uranium nitride and mixed uranium plutonium nitride

    Chang, J.Y.

    1975-01-01

    The hot pressing characteristics of uranium nitride and mixed uranium plutonium nitride were studied. The utilization of computer programs together with the experimental technique developed in the present study may serve as a useful purpose of prediction and fabrication of advanced reactor fuel and other high temperature ceramic materials for the future. The densification of nitrides follow closely with a plastic flow theory expressed as: d rho/ dt = A/T(t) (1-rho) [1/1-(1-rho)/sup 2/3/ + B1n (1-rho)] The coefficients, A and B, were obtained from experiment and computer curve fitting. (8 figures) (U.S.)

  19. STS-114: Discovery Crew Post Landing Press Briefing

    2005-01-01

    The crew of the STS-114 Discovery is shown during a post landing press briefing. Commander Collins introduces the crew members who consist of Pilot Jim Kelley, Mission Specialist Soichi Noguchi from JAXA, Steve Robinson, Mission Specialist and Charlie Camarda, Mission Specialist. Steve Robinson answers a question from the news media about the repair that he performed in orbit, and his feelings about being back in his hometown of California. Commander Collins talks about the most significant accomplishment of the mission. The briefing ends as each crewmember reflects on the Space Shuttle Columbia tragedy and expresses their personal thoughts and feelings as they re-entered the Earth's atmosphere.

  20. Dynamic balance abilities of collegiate men for the bench press.

    Piper, Timothy J; Radlo, Steven J; Smith, Thomas J; Woodward, Ryan W

    2012-12-01

    This study investigated the dynamic balance detection ability of college men for the bench press exercise. Thirty-five college men (mean ± SD: age = 22.4 ± 2.76 years, bench press experience = 8.3 ± 2.79 years, and estimated 1RM = 120.1 ± 21.8 kg) completed 1 repetition of the bench press repetitions for each of 3 bar loading arrangements. In a randomized fashion, subjects performed the bench press with a 20-kg barbell loaded with one of the following: a balanced load, one 20-kg plate on each side; an imbalanced asymmetrical load, one 20-kg plate on one side and a 20-kg plate plus a 1.25-kg plate on the other side; or an imbalanced asymmetrical center of mass, 20-kg plate on one side and sixteen 1.25-kg plates on the other side. Subjects were blindfolded and wore ear protection throughout all testing to decrease the ability to otherwise detect loads. Binomial data analysis indicated that subjects correctly detected the imbalance of the imbalanced asymmetrical center of mass condition (p[correct detection] = 0.89, p < 0.01) but did not correctly detect the balanced condition (p[correct detection] = 0.46, p = 0.74) or the imbalanced asymmetrical condition (p[correct detection] = 0.60, p = 0.31). Although it appears that a substantial shift in the center of mass of plates leads to the detection of barbell imbalance, minor changes of the addition of 1.25 kg (2.5 lb) to the asymmetrical condition did not result in consistent detection. Our data indicate that the establishment of a biofeedback loop capable of determining balance detection was only realized under a high degree of imbalance. Although balance detection was not present in either the even or the slightly uneven loading condition, the inclusion of balance training for upper body may be futile if exercises are unable to establish such a feedback loop and thus eliciting an improvement of balance performance.

  1. Tribologic analysis and technical innovation for rotary molding press

    Luo Wei; Bai Yumeng; Dai Xingjian

    2012-01-01

    The rotary molding press R53C-Y is the key facility in the compression molding working procedure of the nu clear fuel pellets. Its main compression assembly called the upper compression roller frame has been worn seriously during the production. At first, the mechanical model of the upper compression roller assembly was established for analysis and calculation physical strength. Then the wear causations of the upper compression roller frame were analyzed, and the existent problems of central lubrication system were discussed. Finally, Oil-air central lubrication system was designed considering the characteristic of nuclear fuel pellets production. (authors)

  2. Kustomoitu responsiivinen WordPress-sivusto suomalaiselle Toisenlainen-elokuvalle

    Räsänen, Kati

    2016-01-01

    Opinnäytetyö kertoo Toisenlainen-nimiselle suomalaiselle elokuvalle toteutetusta verkkosivuprojektista. Sivuston pohjana käytettiin WordPress-sisällönhallintajärjestelmää ja sivuston teossa huomioitiin sen skaalautuvuus sekä käytettävyys eri päätelaitteilla. Tutkimusraportissa käsitellään myös tarkemmin responsiivista verkkosivukehitystä sekä sitä, millaisia uusia ajatus- ja toimintamalleja se verkkosivujen tekijöiltä vaatii. Lisäksi raportissa käydään läpi responsiiviseen kehitykseen lii...

  3. 'Combating' tropical diseases in the German colonial press.

    Correa, Sílvio Marcus de Souza

    2013-03-01

    This article shows how much certain German language newspapers were a vehicule for reporting to the lay public on 'combating' tropical diseases. Through the press, immigrants and their descendents in Brazil were informed not only about the diseases which afflicted German colonists in Africa, but also about measures concerning sanitation, prophylaxis and experiments with tropical medicine, etc. Based on hemerographic sources, it shows how successful the overseas German communities were in sharing their experiences regarding health in tropical and/or sub-tropical regions.

  4. FILMING OF 'CONTACT' AT LC39 PRESS SITE

    1997-01-01

    Warner Bros.' cast and crew are filming scenes for the movie 'Contact' at Kennedy Space Center's Launch Complex 39 Press Site on January 30. The screenplay for 'Contact' is based on the best- selling novel by the late astronomer Carl Sagan. The cast includes Jodie Foster, Matthew McConaughey, John Hurt, James Woods, Tom Skerritt, David Morse, William Fichtner, Rob Lowe and Angela Bassett. Described by Warner Bros. as a science fiction drama, 'Contact' will depict humankind's first encounter with evidence of extraterrestrial life.

  5. Preparation and microstructure of hot-pressed YIG

    Abdul Halim Shaari; Mansor Hashim; Sidek Haji Abd Aziz

    1992-01-01

    Bulk magnetic ceramics such as yttrium-iron-garnet (YIG) and nickel-zinc ferrite were prepared by the conventional-firing and hot-press techniques. Pre-sintering and sintering, both in air, were carried out at temperature ≥ 1200 0 C. Initial density and microstructural measurements show that the high density samples with uniform grain size can be readily achieved by hot-pressing. The well-defined microstructures, the high density attained. The agreement of saturation magnetization 4πMs values and the high resistivities indicated that the optimized preparation conditions for conventional firing yielded yttrium-iron-garnet of good quality. Quenched and isochronally annealed, the YIG samples were also found to retain their room-temperature saturation-magnetization and resonance linewidth values after any single heat treatment. However, the electrical resistivity and the effective linewidth clearly exhibited isochronal recovery. A possible model to explain this behaviour and its implications on microwave applications are discussed. Ferrites of the type MFe 2 O 4 where M=Mg, Mn, Co, Fe, Cu, Zn and Cd and of the type Ni1-2xSnxFe 2 O4 have also been prepared and their properties are being studied

  6. Climate change and daily press : Italy vs Usa parallel analysis

    Borrelli, G.; Mazzotta, V.; Falconi, C.; Grossi, R.; Farabollini, F.

    1996-06-01

    Among ENEA (Italian National Agency for New Technologies, Energy, and the Environment) activities, one deals with analysis and strategies of environmental information. A survey of four daily newspaper coverage, on an issue (Global Climate Change) belonging to this area, has been realized. The involved newspapers are: two Italian ones, namely 'La Repubblica' and 'Il Corriere della Sera', two North-American ones, namely 'New York Times' and 'Washington Post'. Purpose of the work was that of detecting the qualitative and quantitative level of consciousness of the Italian press via a comparison with the North-American press, notoriously sensible and careful on environmental issues. The number of articled analyzed is partitioned in the following numerical data: 319 for the 'New York Times', 309 for the 'Washington Post', 146 for the 'Corriere della Sera', 81 articles for 'La Repubblica'. The time period covered for the analysis spans from 1989, initiatic year for the organization of the 1992 Rio Conference, to December 1994, deadline date for the submission of national

  7. Treatment of zircaloy cladding hulls by isostatic pressing

    Tegman, R.; Burstroem, M.

    1984-12-01

    A method for the treatment of Zircaloy fuel hulls is proposed. It involves hot isostatic pressing (HIP) for making large, completely densified metallic bodies of the waste. The hulls are packed into a bellows-shaped container of steel. On packing the fuel hulls give a filling factor of only 14%, which is too low for non-deformable compaction in a normal container, but by using a belloped container, a non-deformable compaction can be obtained without any pretreatment of the hulls. Fully dense and mechanically strong blocks of Zircaloy can be fabricated by holding them at temperatures of around 1000 degrees C for three hours. It is also feasible to incorporate the other metallic parts of the fuel bundle, such as top and bottom tie plates and spacers, in the pressing. The HIP-densified hulls provide an effective means of self-containment of radioactive waste due to the excellent corrosion resistance of Zircaloy. A waste loading factor of close to 100% can be realized. Futher, a volume reduction factor of 7 and a surface reduction factor of aout 250 for a 1-ton canister can be achieved. Equilibrium calculations have shown that tritium present in the hulls can quantitatively be contained in the HIPed block. A study has been made of a possible process for industrilscale use. (Author)

  8. Diachronic changes in word probability distributions in daily press

    Stanković Jelena

    2006-01-01

    Full Text Available Changes in probability distributions of individual words and word types were investigated within two samples of daily press in the span of fifty years. Two samples of daily press were used in this study. The one derived from the Corpus of Serbian Language (CSL /Kostić, Đ., 2001/ that covers period between 1945. and 1957. and the other derived from the Ebart Media Documentation (EBR that was complied from seven daily news and five weekly magazines from 2002. and 2003. Each sample consisted of about 1 million words. The obtained results indicate that nouns and adjectives were more frequent in the CSL, while verbs and prepositions are more frequent in the EBR sample, suggesting a decrease of sentence length in the last five decades. Conspicuous changes in probability distribution of individual words were observed for nouns and adjectives, while minimal or no changes were observed for verbs and prepositions. Such an outcome suggests that nouns and adjectives are most susceptible to diachronic changes, while verbs and prepositions appear to be resistant to such changes.

  9. Gender violence news in British and American press

    Sara Bustinduy

    2016-03-01

    Full Text Available This study aims to prove which qualities, from the British and United States actual press, are more adequate for gender violence issues, comparing news on the same stories. It is evident the influence of mass media on public opinion and, therefore, the responsibility that written press has on gender violence messages, avoiding sensationalism. Psycholinguistic studies have established the relation language-thought, so language used in journalism is crucial. Following the belief that newspapers considered more liberal and independent will lead to a better treatment than traditional ones considered to be more reluctant to change, journals have been selected. Furthermore, different cultures can be as objective and respectful but maybe less committed with the issue, as it may arise from the samples. There have been emerging ethic codes giving guidelines to journalists, including discrimination, and more specific on gender sensitive reporting. Therefore, the objective to improve public opinion information, stepping away from stereotypes and oversimplifications, is substantial, and will undoubtedly result in a better understanding of equality.

  10. Incineration ashes conditioning by isostatic pressing and melting

    Jouan, A.; Ouvrier, N.; Teulon, F.

    1990-01-01

    Alpha-bearing solid incineration wastes are conditioned for two principal reasons: to enhance the quality of the finished product for long-term storage, and to reduce the total waste volume. Isostatic pressing parameters were defined using containers 36 mm in diameter; the physicochemical properties of the compacted ashes were determined with 140 mm diameter containers and industrial feasibility was demonstrated with a large (300 mm diameter) container. Two types of ashes were used: ashes fabricated at Marcoule (either in devices developed by the CEA for the MELOX project with a standard MELOX composition, or by direct incineration at COGEMA's UP1 plant) and fly ash from a domestic waste incinerator. A major engineering study was also undertaken to compare the three known ash containment processes: isostatic pressing, melting, and cement-resin matrix embedding. The flowsheet, operational chronology and control principles were detailed for each process, and a typical plant layout was defined to allow comparisons of both investment and operating costs

  11. Effects of different vibration exercises on bench press.

    Marín, P J; Torres-Luque, G; Hernández-García, R; García-López, D; Garatachea, N

    2011-10-01

    This study was undertaken to analyze the effects of different vibration recovery strategies via feet or hands on the number of repetitions performed and on mean velocity, peak velocity and blood lactate concentration during consecutive bench-press sets. 9 elite judo athletes performed 3 sets of bench press at 60% of one-repetition maximum (1RM), leading to failure and allowing a 180 s rest period between sets. During the rest period, 1 of the 3 following procedures was performed: 150 s rest plus 30 s push-up vibration exercise (Push-up), 150 s rest plus 30 s squat vibration exercise (Squat) or 180 s only rest (Passive). Statistical analysis revealed that the Squat condition resulted in a significant increase in the number of repetitions achieved, in comparison with all other rest strategies. However, kinematic parameters and blood lactate concentration were not affected by vibration. These data suggest that a vibration stimulus applied to the feet, between sets, can result in positive improvements in upper body resistance exercise performance. Although the mechanisms are not fully understood, this positive effect of vibration could be due to an increased motor cortex excitability and voluntary drive. © Georg Thieme Verlag KG Stuttgart · New York.

  12. Kennedy Space Center Press Site (SWMU 074) Interim Measure Report

    Applegate, Joseph L.

    2015-01-01

    This report summarizes the Interim Measure (IM) activities conducted at the Kennedy Space Center (KSC) Press Site ("the Press Site"). This facility has been designated as Solid Waste Management Unit 074 under KSC's Resource Conservation and Recovery Act Corrective Action program. The activities were completed as part of the Vehicle Assembly Building (VAB) Area Land Use Controls Implementation Plan (LUCIP) Elimination Project. The purpose of the VAB Area LUCIP Elimination Project was to delineate and remove soil affected with constituents of concern (COCs) that historically resulted in Land Use Controls (LUCs). The goal of the project was to eliminate the LUCs on soil. LUCs for groundwater were not addressed as part of the project and are not discussed in this report. This report is intended to meet the Florida Department of Environmental Protection (FDEP) Corrective Action Management Plan requirement as part of the KSC Hazardous and Solid Waste Amendments permit and the U.S. Environmental Protection Agency's (USEPA's) Toxic Substance Control Act (TSCA) self-implementing polychlorinated biphenyl (PCB) cleanup requirements of 40 Code of Federal Regulations (CFR) 761.61(a).

  13. Muscle synergies during bench press are reliable across days.

    Kristiansen, Mathias; Samani, Afshin; Madeleine, Pascal; Hansen, Ernst Albin

    2016-10-01

    Muscle synergies have been investigated during different types of human movement using nonnegative matrix factorization. However, there are not any reports available on the reliability of the method. To evaluate between-day reliability, 21 subjects performed bench press, in two test sessions separated by approximately 7days. The movement consisted of 3 sets of 8 repetitions at 60% of the three repetition maximum in bench press. Muscle synergies were extracted from electromyography data of 13 muscles, using nonnegative matrix factorization. To evaluate between-day reliability, we performed a cross-correlation analysis and a cross-validation analysis, in which the synergy components extracted in the first test session were recomputed, using the fixed synergy components from the second test session. Two muscle synergies accounted for >90% of the total variance, and reflected the concentric and eccentric phase, respectively. The cross-correlation values were strong to very strong (r-values between 0.58 and 0.89), while the cross-validation values ranged from substantial to almost perfect (ICC3, 1 values between 0.70 and 0.95). The present findings revealed that the same general structure of the muscle synergies was present across days and the extraction of muscle synergies is thus deemed reliable. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Means of temporal expressions in newspaper news and press report

    Čutura Ilijana R.

    2016-01-01

    Full Text Available This paper analyses most frequent linguistic means for expressing the temporal frame in the printed news and press reports. With structuralism as a chosen theoretical framework, the approach of the research is qualitative and stylistic. Since the study belongs to the field of functional stylistics, the primary methods used in the study were functional-stylistic and linguistic-stylistic ones. As the study focuses on two newspaper genres, comparative-stylistic method was used as well. The analysis has been conducted on concrete linguistic excerpts from Serbian daily newspapers published throughout Serbia from 2008 to 2015. The aims of the paper are to show model of expressing temporal frame in contemporary Serbian newspapers. This paper provides an overview of the characteristics of model and the types of temporal expression as well as their variations in contemporal Serbian newspapers. The paper also aims to determine the differencies between printed news and press reports by the choice of temporal expressions. It is shown that there is a tendency of changing schematized structure of these informative genres and some innovation in relation to the choice of linguistic means for expessing the meaning of temporally close events. The research is a contribution to journalism stylistics, more precisely to the Serbian language newspaper stylistics, and also contributes to the study of linguistic and stylistic characteristics of non-literary texts. The study is also relevant because it describes the use of adverbs and adverbial expressions in the journalistic style.

  15. Feasibility of tailoring of press formed thermoplastic composite parts

    Sinke, J.

    2018-05-01

    The Tailor Made Blank concept is widely accepted in the production of sheet metal parts. By joining, adding and subtracting materials, and sometimes even applying different alloys, parts can be produced more efficiently by cost and/or weight, and new design options have been discovered. This paper is about the manufacture of press formed parts of Fibre Reinforced Thermoplastics and the evaluation whether the Tailoring concept, though adapted to the material behavior of FRTP, can be applied to these composites as well. From research, the first results and ideas are presented. One of the ideas is the multistep forming process, creating parts with thickness variations and combinations of fibre orientations that are usually not feasible using common press forming strategies. Another idea is the blending of different prepreg materials in one component. This might be useful in case of specific details, like for areas of mechanical fastening or to avoid carbon/metal contact, otherwise resulting in severe corrosion. In a brief overview, future perspectives of the potential of the Tailoring concept are presented.

  16. Precision Force Control for an Electro-Hydraulic Press Machine

    Hong-Ming Chen

    2014-08-01

    Full Text Available This thesis is primarily intended to design a PC-based control system to control the force of an electro-hydraulic servo press system for implementing precision force control. The main feature is to develop a composite control by using the relief valve and the flow servo valve. Using feedback from a force sensor, a fuzzy controller was designed with LabVIEW software as the system control core for achieving a precision force control for the hydraulic cylinder on its travel and output. The weakness of hydraulic systems is that hydraulic oil is compressible and prone to leaking, and its characteristics can vary with oil temperature, thus making it difficult for a general linear controller to achieve accurate control. Therefore, a fuzzy controller was designed with LabVIEW along with a NI-PCI_6221 interface card and a load cell to control the servo valve flow and the relief valve to control the pressure source. The testing results indicate that accurate force control output of an electro-hydraulic servo press system can be obtained.

  17. Human Rights and Consership in the Portuguese Press

    Isabel Salema Morgado

    2007-06-01

    Full Text Available This article analyzes the censorship system existing in Portugal in the XVIII century, when a rigid jurisdiction with respect to press freedom was instituted by Portuguese State and how “Gazeta de Lisboa” succeeded in informing its public about the revolutionary events that took place in France during the year of 1789. Many years after that, in 1948, other important event – the Universal Declaration of Human Rights approved by the United Nations General Assembly, did not receive the attention of Portuguese Press. Of the 15 newspapers and magazines with wider circulation that were consulted, only three published the news of the approval. Also I did not fi nd in any of the archives documents which proved the exercising of censorship or punishment, by the dictatorial regime of Salazar, in the form of disciplinary processes against the newspapers with relation to the publication of news referring to the Declaration. I am inclined toward the theory of the act of self-censorship imposed by the editor on himself, in both events.

  18. LSA glass-ceramic tiles made by powder pressing

    Figueira, F.C.; Bertan, F.M.; Riella, H.G.; Uggioni, E.; Bernardin, A.M.

    2009-01-01

    A low cost alternative for the production of glass-ceramic materials is the pressing of the matrix glass powders and its consolidation simultaneously with crystallization in a single stage of sintering. The main objective of this work was to obtain LSA glass ceramics with low thermal expansion, processed by pressing and sintering a ceramic frit powder. The raw materials were homogenized and melted (1480 deg C, 80min), and the melt was poured in water. The glass was chemically (XRF and AAS) and thermally (DTA, 10 deg C/min, air) characterized, and then ground (60min and 120min). The ground powders were characterized (laser diffraction) and compressed (35MPa and 45MPa), thus forming four systems. The compacts were dried (150 deg C, 24h) and sintered (1175 deg C and 1185 deg C, 10 deg C/min). Finally, the glass-ceramics were characterized by microstructural analysis (SEM and XRD), mechanical behavior (σbending) and thermal analysis (α). The best results for thermal expansion were those for the glass-ceramics processed with smaller particle size and greater compaction pressure. (author)

  19. Does community participation set the local press agenda? A view on deliberative and civic practices in the Portuguese press

    Ferreira, Gil Baptista

    2013-01-01

    What are journalists’ perceptions of the citizen’s role in democratic life? What is the role that journalists attribute to the public in the construction of the news agenda? The main goal of this study is to investigate the relationship between the local press, citizens and civic practices. It takes as starting point a dual theoretical approach, the theory of deliberative democracy and the public journalism movement, to assess the scope of the concept of “deliberative journalism.” Under the a...

  20. Ireland’s Press Ombudsman, John Horgan, on accountability, regulation and redress: Where do press councils stand?

    Horgan, John

    2012-01-01

    In recent years, the creation of a number of press councils in Europe and elsewhere, as well as the concurrent appointment of internal ombudsmen or readers’ representatives in many significant newspapers, particularly in the United States, is a clear response to a growing public perception that there is a need for an appropriate level of accountability for the print media. It is fair to assume that this is related, in part, to a public perception that there is a need for remedies for abuses o...