WorldWideScience

Sample records for unity fringe visibility

  1. Decorrelation and fringe visibility: On the limiting behavior of varous electronic speckle pattern correlation interferometers

    Owner-Petersen, Mette

    1996-01-01

    I discuss the behavior of fringe formation in image-plane electronic speckle-pattern correlation interferometers as the limit of total decorrelation is approached. The interferometers are supposed to operate in the difference mode. The effect of decorrelation will be a decrease in fringe visibility...... until the limit of total decorrelation, when no fringes will be formed, is reached. A quantitative evaluation of the partially decorrelated fringe pattern is presented for the case of decorrelation due to both tilt and in-plane translation of an object surface element. It is shown that the fringe...

  2. Resolving fringe ambiguities of a wide-field Michelson interferometer using visibility measurements of a noncollimated laser beam.

    Wan, Xiaoke; Wang, Ji; Ge, Jian

    2009-09-10

    An actively stabilized interferometer with a constant optical path difference is a key element in long-term astronomical observation, and resolving interference fringe ambiguities is important to produce high-precision results for the long term. We report a simple and reliable method of resolving fringe ambiguities of a wide-field Michelson interferometer by measuring the interference visibility of a noncollimated single-frequency laser beam. Theoretical analysis shows that the interference visibility is sensitive to a subfringe phase shift, and a wide range of beam arrangements is suitable for real implementation. In an experimental demonstration, a Michelson interferometer has an optical path difference of 7 mm and a converging monitoring beam has a numerical aperture of 0.045 with an incidental angle of 17 degrees. The resolution of visibility measurements corresponds to approximately 1/16 fringe in the interferometer phase shift. The fringe ambiguity-free region is extended over a range of approximately 100 fringes.

  3. Increased interference fringe visibility from the post-fabrication heat treatment of a perfect crystal silicon neutron interferometer

    Heacock, B.; Arif, M.; Cory, D. G.; Gnaeupel-Herold, T.; Haun, R.; Huber, M. G.; Jamer, M. E.; Nsofini, J.; Pushin, D. A.; Sarenac, D.; Taminiau, I.; Young, A. R.

    2018-02-01

    We find that annealing a previously chemically etched interferometer at 800 °C dramatically increased the interference fringe visibility from 23% to 90%. The Bragg plane misalignments were also measured before and after annealing using neutron rocking curves, showing that Bragg plane alignment was improved across the interferometer after annealing. This suggests that current interferometers with low fringe visibility may be salvageable and that annealing may become an important step in the fabrication process of future neutron interferometers, leading to less need for chemical etching and larger more exotic neutron interferometers.

  4. Controversy among giants: Young's experiment and loss of fringe visibility at low photon-count levels

    Rhodes, William T.

    2011-09-01

    An ideal beam splitter model for an absorber presented by Leonhardt in his book Measuring the Quantum State of Light (Cambridge University Press, 1997) has intriguing implications for the simple Young's fringe experiment in the photon-counting regime. Specifically, it suggests that different results will be obtained depending on whether the light forming the fringes is attenuated at the source or at the slits.

  5. Utilising E-on Vue and Unity 3D scenes to generate synthetic images and videos for visible signature analysis

    Madden, Christopher S.; Richards, Noel J.; Culpepper, Joanne B.

    2016-10-01

    This paper investigates the ability to develop synthetic scenes in an image generation tool, E-on Vue, and a gaming engine, Unity 3D, which can be used to generate synthetic imagery of target objects across a variety of conditions in land environments. Developments within these tools and gaming engines have allowed the computer gaming industry to dramatically enhance the realism of the games they develop; however they utilise short cuts to ensure that the games run smoothly in real-time to create an immersive effect. Whilst these short cuts may have an impact upon the realism of the synthetic imagery, they do promise a much more time efficient method of developing imagery of different environmental conditions and to investigate the dynamic aspect of military operations that is currently not evaluated in signature analysis. The results presented investigate how some of the common image metrics used in target acquisition modelling, namely the Δμ1, Δμ2, Δμ3, RSS, and Doyle metrics, perform on the synthetic scenes generated by E-on Vue and Unity 3D compared to real imagery of similar scenes. An exploration of the time required to develop the various aspects of the scene to enhance its realism are included, along with an overview of the difficulties associated with trying to recreate specific locations as a virtual scene. This work is an important start towards utilising virtual worlds for visible signature evaluation, and evaluating how equivalent synthetic imagery is to real photographs.

  6. Fringe wetlands

    Lugo, A.E.

    1990-01-01

    Fringe wetlands are characterized by the dominance of few species, a clear species zonation, synchrony of ecological processes with episodic events, and simplicity in the structure of vegetation. The structure and ecosystem dynamics of fringe forested wetlands are presented with emphasis on saltwater wetlands because they have been studied more than freshwater ones. The study areas were Caribbean and Florida mangroves. Fringe wetlands are found on the water edge of oceans, inland estuaries, and lakes. Water motion in the fringe is bi-directional and perpendicular to the forest and due mostly to tidal energy in oceanic and estuarine fringes. in lakes, water moves in and out of the fringe under the influence of wind, waves, or seiches. some fringe forests are occasionally flushed by terrestrial runoff or aquifer discharge. In contrast, fringe forests located on small offshore islands or steep coastal shroes are isolated from terrestrial runoff or aquifer discharge, and their hydroperiod is controlled by tides and waves only. Literature reviews suggest that ecosystem parameters such as vegetation structure, tree growth, primary productivity, and organic matter in sediments respond proportionally to hydrologic energy. Human activity that impacts on fringe forested wetlands include harvesting of trees, oil pollution and eutrophication. 72 refs., 12 figs., 9 tabs

  7. Making sense of nanocrystal lattice fringes

    Fraundorf, P.; Qin Wentao; Moeck, Peter; Mandell, Eric

    2005-01-01

    The orientation dependence of thin-crystal lattice fringes can be gracefully quantified using fringe-visibility maps, a direct-space analog of Kikuchi maps [Nishikawa and Kikuchi, Nature (London) 121, 1019 (1928)]. As in navigation of reciprocal space with the aid of Kikuchi lines, fringe-visibility maps facilitate acquisition of crystallographic information from lattice images. In particular, these maps can help researchers to determine the three-dimensional lattice of individual nanocrystals, to 'fringe-fingerprint' collections of randomly oriented particles, and to measure local specimen thickness with only a modest tilt. Since the number of fringes in an image increases with maximum spatial-frequency squared, these strategies (with help from more precise goniometers) will be more useful as aberration correction moves resolutions into the subangstrom range

  8. Getting started with Unity

    Felicia, Patrick

    2013-01-01

    Getting Started with Unity is written in an easy-to-follow tutorial format.""Getting Started with Unity"" is for[ 3D game developers[/color] who would like to learn how to use Unity3D and become familiar with its core features. This book is also suitable for intermediate users who would like to improve their skills. No prior knowledge of Unity3D is required.

  9. Mastering Unity scripting

    Thorn, Alan

    2015-01-01

    Mastering Unity Scripting is an advanced book intended for students, educators, and professionals familiar with the Unity basics as well as the basics of scripting. Whether you've been using Unity for a short time or are an experienced user, this book has something important and valuable to offer to help you improve your game development workflow.

  10. Learning NGUI for unity

    Pearson, Charles

    2014-01-01

    If you are a Unity 3D developer who wants to create an effective and user-friendly GUI using NGUI for Unity, then this book is for you. Prior knowledge of C# scripting is expected; however, no knowledge of NGUI is required.

  11. Unity multiplayer games

    Stagner, Alan

    2013-01-01

    An easy-to-follow, tutorial manner that uses the learning-by-example approach.If you are a developer who wants to start making multiplayer games with the Unity game engine, this book is for you. This book assumes you have some basic experience with programming. No prior knowledge of the Unity IDE is required.

  12. NGUI for Unity

    Bernardoff, Charles

    2014-01-01

    An easy-to-follow, step-by-step tutorial focusing on practical situations and manipulations, guiding you to create a concrete Graphical User Interface and a simple 2D game.If you are a Unity 3D developer looking forward to learn NGUI for Unity, then this book is for you. Prior knowlege of C# scripting is expected. Additional knowledge of Unity 3D Editor, GameObject and creating/adding scripts to GameObject would be beneficial; however, no prior knowledge of NGUI is required.

  13. On-Line Fringe Tracking and Prediction at IOTA

    Wilson, Edward; Mah, Robert; Lau, Sonie (Technical Monitor)

    1999-01-01

    The Infrared/Optical Telescope Array (IOTA) is a multi-aperture Michelson interferometer located on Mt. Hopkins near Tucson, Arizona. To enable viewing of fainter targets, an on-line fringe tracking system is presently under development at NASA Ames Research Center. The system has been developed off-line using actual data from IOTA, and is presently undergoing on-line implementation at IOTA. The system has two parts: (1) a fringe tracking system that identifies the center of a fringe packet by fitting a parametric model to the data; and (2) a fringe packet motion prediction system that uses characteristics of past fringe packets to predict fringe packet motion. Combined, this information will be used to optimize on-line the scanning trajectory, resulting in improved visibility of faint targets. Fringe packet identification is highly accurate and robust (99% of the 4000 fringe packets were identified correctly, the remaining 1% were either out of the scan range or too noisy to be seen) and is performed in 30-90 milliseconds on a Pentium II-based computer. Fringe packet prediction, currently performed using an adaptive linear predictor, delivers a 10% improvement over the baseline of predicting no motion.

  14. Composition: Unity - Diversity series

    Bergstrøm-Nielsen, Carl

    2015-01-01

    Unity-Diversity series are open compositions to be realised by improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". This work is licensed under a Creative Commons "by-nc" License. You may for non-commercial purposes use and distribute it...

  15. Unity 4.x cookbook

    Smith, Matt

    2013-01-01

    Cookbook. From beginners to advanced users, from artists to coders, this book is for you and everyone in your team! This book is for anyone who wants to explore a wide range of Unity scripting and multimedia features and to find ready to use solutions to many game features. Programmers can explore multimedia features, and multimedia developers can try their hand at scripting.

  16. Unity in Major Themes

    Booss-Bavnbek, Bernhelm; Davis, Philip J.

    We describe and explain the desire, common among mathematicians, both for unity and independence in its major themes. In the dialogue that follows, we express our spontaneous and considered judgment and reservations; by contrasting the development of mathematics as a goal-driven process as opposed...

  17. Circular fringe projection profilometry.

    Zhao, Hong; Zhang, Chunwei; Zhou, Changquan; Jiang, Kejian; Fang, Meiqi

    2016-11-01

    In this Letter, a novel three-dimensional (3D) measurement method, called the circular fringe projection profilometry (CFPP), is proposed. Similar to the conventional fringe projection profilometry, CFPP also requires fringe pattern projection and capture, phase demodulation, and phase unwrapping. However, it works with a totally different mechanism. CFPP recovers the height of a point by calculating its distance to the optical center of a projector along the optical axis. This distance is calculated with the aid of the divergence angle of a projected light ray and the distance between the measured point and the optical axis. The distance between the measured point and the optical axis is detected by a camera with telecentric lenses, while the divergence angle can be calculated from the phase of a captured circular fringe pattern. The validity of CFPP is confirmed by a set of experiments.

  18. Windowed fringe pattern analyis

    Kemao, Qian

    2013-01-01

    This book provides solutions to the challenges involved in fringe pattern analysis, covering techniques for full-field, noncontact, and high-sensitivity measurement. The primary goal of fringe pattern analysis is to extract the hidden phase distributions that generally relate to the physical quantities being measured. Both theoretical analysis and algorithm development are covered to facilitate the work of researchers and engineers. The information presented is also appropriate as a specialized subject for students of optical and computer engineering.

  19. Optimized Beam Sculpting with Generalized Fringe-rate Filters

    Parsons, Aaron R.; Liu, Adrian; Ali, Zaki S.; Cheng, Carina

    2016-03-01

    We generalize the technique of fringe-rate filtering, whereby visibilities measured by a radio interferometer are re-weighted according to their temporal variation. As the Earth rotates, radio sources traverse through an interferometer’s fringe pattern at rates that depend on their position on the sky. Capitalizing on this geometric interpretation of fringe rates, we employ time-domain convolution kernels to enact fringe-rate filters that sculpt the effective primary beam of antennas in an interferometer. As we show, beam sculpting through fringe-rate filtering can be used to optimize measurements for a variety of applications, including mapmaking, minimizing polarization leakage, suppressing instrumental systematics, and enhancing the sensitivity of power-spectrum measurements. We show that fringe-rate filtering arises naturally in minimum variance treatments of many of these problems, enabling optimal visibility-based approaches to analyses of interferometric data that avoid systematics potentially introduced by traditional approaches such as imaging. Our techniques have recently been demonstrated in Ali et al., where new upper limits were placed on the 21 {cm} power spectrum from reionization, showcasing the ability of fringe-rate filtering to successfully boost sensitivity and reduce the impact of systematics in deep observations.

  20. Wages or Fringes?

    Eriksson, Tor Viking; Kristensen, Nicolai

    The two key predictions of hedonic wage theory are that there is a trade-o¤ between wages and nonmonetary rewards and that the latter can be used as a sorting device by firms to attract and retain the kind of employees they desire. Empirical analysis of these topics are scarce as they require...... negative wage-fringe trade-offs, con-siderable heterogeneity in willingness to pay for fringe benefits, and signs of sorting. The findings imply that personnel economics models can be applied also to the analysis of nonmonetary rewards....

  1. Optimal fringe angle selection for digital fringe projection technique.

    Wang, Yajun; Zhang, Song

    2013-10-10

    Existing digital fringe projection (DFP) systems mainly use either horizontal or vertical fringe patterns for three-dimensional shape measurement. This paper reveals that these two fringe directions are usually not optimal where the phase change is the largest to a given depth variation. We propose a novel and efficient method to determine the optimal fringe angle by projecting a set of horizontal and vertical fringe patterns onto a step-height object and by further analyzing two resultant phase maps. Experiments demonstrate the existence of the optimal angle and the success of the proposed optimal angle determination method.

  2. Unity connecting module in SSPF

    1998-01-01

    In the Space Station Processing Facility, the Unity connecting module, part of the International Space Station, is shown with Pressurized Mating Adapters 1 (left) and 2 (right) attached. Unity is scheduled to undergo testing of the common berthing mechanism to which other space station elements will dock. Unity is the primary payload on mission STS-88, targeted to launch Dec. 3, 1998. Other testing includes the Pad Demonstration Test to verify the compatibility of the module with the Space Shuttle as well as the ability of the astronauts to send and receive commands to Unity from the flight deck of the orbiter. Unity is expected to be ready for installation into the payload canister on Oct. 25, and transported to Launch Pad 39-A on Oct. 27. The Unity will be mated to the Russian-built Zarya control module which should already be in orbit at that time.

  3. Unity behind diversity in nature

    Pati, J.C.

    1980-03-01

    This is a lecture delivered to general audiences of physicists as well as non-physicists at institutions in India, which are listed at the end. The central theme of the lecture is unity behind diversity in Nature. The main topic of the lecture concerns the unity of the basic forces of Nature and the unity of all basic matter, which are used to illustrate the central theme. (author)

  4. INTERFERENCE FRINGES OF SOLAR ACOUSTIC WAVES AROUND SUNSPOTS

    Chou, Dean-Yi; Zhao Hui; Yang, Ming-Hsu; Liang, Zhi-Chao, E-mail: chou@phys.nthu.edu.tw [Physics Department, National Tsing Hua University, Hsinchu, Taiwan (China)

    2012-10-20

    Solar acoustic waves are scattered by a sunspot due to the interaction between the acoustic waves and the sunspot. The sunspot, excited by the incident wave, generates the scattered wave. The scattered wave is added to the incident wave to form the total wave around the sunspot. The interference fringes between the scattered wave and the incident wave are visible in the intensity of the total wave because the coherent time of the incident wave is of the order of a wave period. The strength of the interference fringes anti-correlates with the width of temporal spectra of the incident wave. The separation between neighboring fringes increases with the incident wavelength and the sunspot size. The strength of the fringes increases with the radial order n of the incident wave from n = 0 to n = 2, and then decreases from n = 2 to n = 5. The interference fringes play a role analogous to holograms in optics. This study suggests the feasibility of using the interference fringes to reconstruct the scattered wavefields of the sunspot, although the quality of the reconstructed wavefields is sensitive to the noise and errors in the interference fringes.

  5. Fringe pattern denoising via image decomposition.

    Fu, Shujun; Zhang, Caiming

    2012-02-01

    Filtering off noise from a fringe pattern is one of the key tasks in optical interferometry. In this Letter, using some suitable function spaces to model different components of a fringe pattern, we propose a new fringe pattern denoising method based on image decomposition. In our method, a fringe image is divided into three parts: low-frequency fringe, high-frequency fringe, and noise, which are processed in different spaces. An adaptive threshold in wavelet shrinkage involved in this algorithm improves its denoising performance. Simulation and experimental results show that our algorithm obtains smooth and clean fringes with different frequencies while preserving fringe features effectively.

  6. 36 CFR 1211.525 - Fringe benefits.

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Fringe benefits. 1211.525... Prohibited § 1211.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or retirement benefit...

  7. 43 CFR 41.525 - Fringe benefits.

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Fringe benefits. 41.525 Section 41.525... in Employment in Education Programs or Activities Prohibited § 41.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital...

  8. 22 CFR 229.525 - Fringe benefits.

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Fringe benefits. 229.525 Section 229.525... Employment in Education Programs or Activities Prohibited § 229.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital...

  9. 14 CFR 1253.525 - Fringe benefits.

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Fringe benefits. 1253.525 Section 1253.525... in Employment in Education Programs or Activities Prohibited § 1253.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital...

  10. 32 CFR 196.525 - Fringe benefits.

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Fringe benefits. 196.525 Section 196.525... Prohibited § 196.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or retirement benefit...

  11. 6 CFR 17.525 - Fringe benefits.

    2010-01-01

    ... 6 Domestic Security 1 2010-01-01 2010-01-01 false Fringe benefits. 17.525 Section 17.525 Domestic... in Employment in Education Programs or Activities Prohibited § 17.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, the term fringe benefits means any medical...

  12. 10 CFR 5.525 - Fringe benefits.

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Fringe benefits. 5.525 Section 5.525 Energy NUCLEAR... Activities Prohibited § 5.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or retirement benefit...

  13. 31 CFR 28.525 - Fringe benefits.

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Fringe benefits. 28.525 Section 28... the Basis of Sex in Employment in Education Programs or Activities Prohibited § 28.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any...

  14. 29 CFR 36.525 - Fringe benefits.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Fringe benefits. 36.525 Section 36.525 Labor Office of the... Activities Prohibited § 36.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or retirement benefit...

  15. 22 CFR 146.525 - Fringe benefits.

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Fringe benefits. 146.525 Section 146.525... Employment in Education Programs or Activities Prohibited § 146.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital...

  16. 28 CFR 54.525 - Fringe benefits.

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Fringe benefits. 54.525 Section 54.525... in Employment in Education Programs or Activities Prohibited § 54.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital...

  17. 10 CFR 1042.525 - Fringe benefits.

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Fringe benefits. 1042.525 Section 1042.525 Energy... Education Programs or Activities Prohibited § 1042.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life...

  18. 49 CFR 25.525 - Fringe benefits.

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Fringe benefits. 25.525 Section 25.525... Employment in Education Programs or Activities Prohibited § 25.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital...

  19. 44 CFR 19.525 - Fringe benefits.

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Fringe benefits. 19.525... Programs or Activities Prohibited § 19.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or...

  20. 40 CFR 5.525 - Fringe benefits.

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Fringe benefits. 5.525 Section 5.525... in Employment in Education Programs or Activities Prohibited § 5.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital...

  1. Unity 5 for Android essentials

    Cogut, Valera

    2015-01-01

    This book is perfect for game developers who want to learn how to develop, optimize, and publish games for Android devices in a quick and easy manner using Unity 5. This book assumes a basic knowledge of game design concepts and/or some experience with other game technologies such as Unreal Engine 4, CryEngine, or GameMaker.

  2. Computer aided fringe pattern analysis

    Sciammarella, Cesar A.

    The paper reviews the basic laws of fringe pattern interpretation. The different techniques that are currently utilized are presented using a common frame of reference stressing the fact that these techniques are different variations of the same basic principle. Digital and analog techniques are discussed. Currently available hardware is presented and the relationships between hardware and the operations of pattern fringe processing are pointed out. Examples are given to illustrate the ideas discussed in the paper.

  3. Learn Unity for 2D game development

    Thorn, Alan

    2013-01-01

    The only Unity book specifically covering 2D game development Written by Alan Thorn, experience game developer and author of seven books on game programming Hands-on examples of all major aspects of 2D game development using Unity

  4. Fringing-field effects in acceleration columns

    Yavor, M.I.; Weick, H.; Wollnik, H.

    1999-01-01

    Fringing-field effects in acceleration columns are investigated, based on the fringing-field integral method. Transfer matrices at the effective boundaries of the acceleration column are obtained, as well as the general transfer matrix of the region separating two homogeneous electrostatic fields with different field strengths. The accuracy of the fringing-field integral method is investigated

  5. 15 CFR 8a.525 - Fringe benefits.

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Fringe benefits. 8a.525 Section 8a.525 Commerce and Foreign Trade Office of the Secretary of Commerce NONDISCRIMINATION ON THE BASIS OF SEX IN... in Employment in Education Programs or Activities Prohibited § 8a.525 Fringe benefits. (a) “Fringe...

  6. 18 CFR 1317.525 - Fringe benefits.

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Fringe benefits. 1317... benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or retirement benefit, service, policy or plan, any...

  7. 7 CFR 15a.56 - Fringe benefits.

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Fringe benefits. 15a.56 Section 15a.56 Agriculture Office of the Secretary of Agriculture EDUCATION PROGRAMS OR ACTIVITIES RECEIVING OR BENEFITTING FROM... Activities Prohibited § 15a.56 Fringe benefits. (a) “Fringe benefits” defined. For purposes of this part...

  8. 13 CFR 113.525 - Fringe benefits.

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Fringe benefits. 113.525 Section... benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or retirement benefit, service, policy or plan, any...

  9. 38 CFR 23.525 - Fringe benefits.

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Fringe benefits. 23.525... benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or retirement benefit, service, policy or plan, any...

  10. 45 CFR 2555.525 - Fringe benefits.

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Fringe benefits. 2555.525 Section 2555.525 Public... benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or retirement benefit, service, policy or plan, any...

  11. 34 CFR 106.56 - Fringe benefits.

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Fringe benefits. 106.56 Section 106.56 Education... benefits. (a) Fringe benefits defined. For purposes of this part, fringe benefits means: Any medical, hospital, accident, life insurance or retirement benefit, service, policy or plan, any profit-sharing or...

  12. 48 CFR 731.372 - Fringe benefits.

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Fringe benefits. 731.372 Section 731.372 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT GENERAL....372 Fringe benefits. USAID's policies on certain fringe benefits related to overseas service...

  13. 45 CFR 618.525 - Fringe benefits.

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Fringe benefits. 618.525 Section 618.525 Public... benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or retirement benefit, service, policy or plan, any...

  14. 24 CFR 3.525 - Fringe benefits.

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Fringe benefits. 3.525 Section 3... benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital, accident, life insurance, or retirement benefit, service, policy or plan, any...

  15. The Necessary Unity of Opposites

    Graham, Brian Russell

    and `suprahistorical' alternative. As Graham points out, much of Frye's thought is focused on secular concerns, and, within that context, his dialectical and `suprahistorical' thinking is `post-partisan,' a feature which also signifies and explains Frye's appeal. Graham contends it is the thinking of William Blake......, specifically his conceptions of innocence and experience, which provides the inspiration for Frye's dialectical thinking. Graham systematically addresses the main areas of Frye's work: Blake's poetry, secular literature, education and work, politics, and Scripture. In following each of these themes......, The Necessary Unity of Opposites expertly clarifies Frye's dialectical thinking, while drawing attention to its structural connection to Blake, Frye's great preceptor....

  16. Phase unwrapping algorithm based on multi-frequency fringe projection and fringe background for fringe projection profilometry

    Zhang, Chunwei; Zhao, Hong; Gu, Feifei; Ma, Yueyang

    2015-01-01

    A phase unwrapping algorithm specially designed for the phase-shifting fringe projection profilometry (FPP) is proposed. It combines a revised dual-frequency fringe projectionalgorithm and a proposed fringe background based quality guided phase unwrapping algorithm (FB-QGPUA). Phase demodulated from the high-frequency fringe patterns is partially unwrapped by that demodulated from the low-frequency ones. Then FB-QGPUA is adopted to further unwrap the partially unwrapped phase. Influences of the phase error on the measurement are researched. Strategy to select the fringe pitch is given. Experiments demonstrate that the proposed method is very robust and efficient. (paper)

  17. Deposition gradients across mangrove fringes

    Horstman, Erik Martijn; Mullarney, Julia C.; Bryan, K.R.; Sandwell, Dean R.; Aagaard, Troels; Deigaard, Rolf; Fuhrman, David

    2017-01-01

    Observations in a mangrove in the Whangapoua Harbour, New Zealand, have shown that deposition rates are greatest in the fringing zone between the tidal flats and the mangrove forest, where the vegetation is dominated by a cover of pneumatophores (i.e. pencil roots). Current speeds and suspended

  18. Unity behind diversity in Nature

    Pati, J.C.

    1980-01-01

    The unity of the basic forces of Nature and the unity of all basic matter form the main theme of this paper. Recent developments in the theory of fundamental particles are reviewed. The 'quark' concept is described. Conclusion is drawn that the proton, neutron, hyperon and the sigma particles belong to one Baryon family. The Lepton family of electrons, muons and pions is also described. The quantum numbers isospin, strangeness etc. are explained. The nature of the four different basic forces viz., gravity, weak, electromagnetic and strong forces are discussed. Arguments are presented to indicate that the differences in these forces are described at low energies and that at high energies of the order of 10 5 BeV the three forces electromagnetic, weak and strong, merge into one and the same force and at the same energies quarks and leptons interact universally exhibiting their oneness. The stability of the proton is discussed. Future trends are indicated. A fundamental substructure 'preon' is proposed. (A.K.)

  19. Theodor Waitz on psychic unity.

    Jahoda, Gustav

    2014-06-01

    The tolerant stance on 'race' by prominent Enlightenment figures was followed in the 19th century by a powerful wave of biological racism. Many of its proponents took the view that human 'races' constitute separate species, and that most non-white ones are of inferior mentality. An early opponent of this claim was James Cowles Prichard, who used mainly missionary reports in seeking to refute it. Far more extensive work was undertaken by the Herbartian psychologist Theodor Waitz, who collected ethnographic material from all over the world. It was published in six volumes - the last two after his death by his former student Georg Gerland. Waitz aim was to demonstrate the 'psychic unity' of mankind. Initially extracts from the volume on African peoples are presented in order to show how he dealt with his material. The main focus is on his first volume entitled Introduction to Anthropology, in which he elaborates his general thesis. In it Waitz maintains, against the biological racists, that mankind is a single species. Furthermore he discusses the changes from savagery to civilization, attributing them to a combination of geography and history. He was followed by Adolf Bastian who, unlike Waitz, was a great traveller with personal experience of peoples all over the globe. Both firmly believed in the psychic unity of mankind, but Bastian's approach to psychology was very different.

  20. Fringe-tunable electrothermal Fresnel mirror for use in compact and high-speed diffusion sensor.

    Kiuchi, Yuki; Taguchi, Yoshihiro; Nagasaka, Yuji

    2017-01-23

    This paper reports the development of an electrothermal microelectromechanical systems (MEMS) mirror with serpentine shape actuators. A micro Fresnel mirror with fringe-spacing tunability is required to realize a compact and high-speed diffusion sensor for biological samples whose diffusion coefficient changes significantly because of a conformational change. In this case, the measurement time-constant is dependent on the fringe-spacing and diffusion coefficient of the sample. In this study, a fringe-tunable MEMS mirror with an actuation voltage less than 10 V was developed. The characteristics of the fabricated mirror were investigated experimentally. A high-visibility optical interference fringe was successfully demonstrated using both an ultranarrow-linewidth solid-state laser and a low-cost compact laser diode. The experimental results demonstrated a distinct possibility of developing a measurement device using only simple and low-voltage optical components.

  1. Unity power factor switching regulator

    Rippel, Wally E. (Inventor)

    1983-01-01

    A single or multiphase boost chopper regulator operating with unity power factor, for use such as to charge a battery is comprised of a power section for converting single or multiphase line energy into recharge energy including a rectifier (10), one inductor (L.sub.1) and one chopper (Q.sub.1) for each chopper phase for presenting a load (battery) with a current output, and duty cycle control means (16) for each chopper to control the average inductor current over each period of the chopper, and a sensing and control section including means (20) for sensing at least one load parameter, means (22) for producing a current command signal as a function of said parameter, means (26) for producing a feedback signal as a function of said current command signal and the average rectifier voltage output over each period of the chopper, means (28) for sensing current through said inductor, means (18) for comparing said feedback signal with said sensed current to produce, in response to a difference, a control signal applied to the duty cycle control means, whereby the average inductor current is proportionate to the average rectifier voltage output over each period of the chopper, and instantaneous line current is thereby maintained proportionate to the instantaneous line voltage, thus achieving a unity power factor. The boost chopper is comprised of a plurality of converters connected in parallel and operated in staggered phase. For optimal harmonic suppression, the duty cycles of the switching converters are evenly spaced, and by negative coupling between pairs 180.degree. out-of-phase, peak currents through the switches can be reduced while reducing the inductor size and mass.

  2. Dispersed Fringe Sensing Analysis - DFSA

    Sigrist, Norbert; Shi, Fang; Redding, David C.; Basinger, Scott A.; Ohara, Catherine M.; Seo, Byoung-Joon; Bikkannavar, Siddarayappa A.; Spechler, Joshua A.

    2012-01-01

    Dispersed Fringe Sensing (DFS) is a technique for measuring and phasing segmented telescope mirrors using a dispersed broadband light image. DFS is capable of breaking the monochromatic light ambiguity, measuring absolute piston errors between segments of large segmented primary mirrors to tens of nanometers accuracy over a range of 100 micrometers or more. The DFSA software tool analyzes DFS images to extract DFS encoded segment piston errors, which can be used to measure piston distances between primary mirror segments of ground and space telescopes. This information is necessary to control mirror segments to establish a smooth, continuous primary figure needed to achieve high optical quality. The DFSA tool is versatile, allowing precise piston measurements from a variety of different optical configurations. DFSA technology may be used for measuring wavefront pistons from sub-apertures defined by adjacent segments (such as Keck Telescope), or from separated sub-apertures used for testing large optical systems (such as sub-aperture wavefront testing for large primary mirrors using auto-collimating flats). An experimental demonstration of the coarse-phasing technology with verification of DFSA was performed at the Keck Telescope. DFSA includes image processing, wavelength and source spectral calibration, fringe extraction line determination, dispersed fringe analysis, and wavefront piston sign determination. The code is robust against internal optical system aberrations and against spectral variations of the source. In addition to the DFSA tool, the software package contains a simple but sophisticated MATLAB model to generate dispersed fringe images of optical system configurations in order to quickly estimate the coarse phasing performance given the optical and operational design requirements. Combining MATLAB (a high-level language and interactive environment developed by MathWorks), MACOS (JPL s software package for Modeling and Analysis for Controlled Optical

  3. Fringe order correction for the absolute phase recovered by two selected spatial frequency fringe projections in fringe projection profilometry.

    Ding, Yi; Peng, Kai; Yu, Miao; Lu, Lei; Zhao, Kun

    2017-08-01

    The performance of the two selected spatial frequency phase unwrapping methods is limited by a phase error bound beyond which errors will occur in the fringe order leading to a significant error in the recovered absolute phase map. In this paper, we propose a method to detect and correct the wrong fringe orders. Two constraints are introduced during the fringe order determination of two selected spatial frequency phase unwrapping methods. A strategy to detect and correct the wrong fringe orders is also described. Compared with the existing methods, we do not need to estimate the threshold associated with absolute phase values to determine the fringe order error, thus making it more reliable and avoiding the procedure of search in detecting and correcting successive fringe order errors. The effectiveness of the proposed method is validated by the experimental results.

  4. Pro Unity game development with C#

    Thorn, Alan

    2014-01-01

    The only professional-level book on Unity development with C# Covers in-depth aspects of C# development using Unity Readers will create a full-featured first person shooter and gain the knowledge to build their own professional-quality games.

  5. Absolute phase map recovery of two fringe patterns with flexible selection of fringe wavelengths.

    Long, Jiale; Xi, Jiangtao; Zhu, Ming; Cheng, Wenqing; Cheng, Rui; Li, Zhongwei; Shi, Yusheng

    2014-03-20

    A novel approach is proposed to unwrap the phase maps of two fringe patterns in fringe pattern projection-based profilometry. In contrast to existing techniques, where spatial frequencies (i.e., the number of fringes on a pattern) of the two fringe patterns must be integers and coprime, the proposed method is applicable for any two fringe patterns with different fringe wavelengths (i.e., the number of pixels in a fringe) and thus provides more flexibility in the use of fringe patterns. Moreover, compared to the existing techniques, the proposed method is simpler in its implementation and has better antierror capability. Theoretical analysis and experiment results are presented to confirm the effectiveness of the proposed method.

  6. Practical game design with Unity and Playmaker

    Mohov, Sergey

    2013-01-01

    A practical guide packed with examples that helps you to build a full-fledged game with the help of Unity and Playmaker. A few exercises and useful external resources are also provided to improve both the game and your skills.This book is for animation artists and 3D artists, designers, and engineers who want to create interactive content with little or no programming. This book is also for game programmers who want to create a game from scratch in Unity and Playmaker. You are expected to have basic knowledge of game programming and Unity 3D.

  7. Creating e-learning games with Unity

    Horachek, David

    2014-01-01

    Unity is a fully integrated development engine providing the required functionality to create games and interactive 3D content, while reducing the time, effort, and cost of developing the content. Nowadays, many people have started to use Unity in an eLearning setting as it allows them to create real-world scenarios, or models, for training purposes. With Unity, one can develop video games that are not only fun, but are also effective teaching and learning tools. When properly designed, an engaging game is an ideal platform for the presentation, testing, and application of learning objectives.

  8. Employment & the Unity of Social Sciences

    Ivo Šlaus

    2015-05-01

    Full Text Available Employment and the unity of social sciences are discussed. The paper argues that employment is the simplest and the best indicator of human-centered sustainable and secure development.

  9. 29 CFR 1620.11 - Fringe benefits.

    2010-07-01

    ... Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION THE EQUAL PAY ACT § 1620.11 Fringe... unlawful for an employer to discriminate between men and women performing equal work with regard to fringe... spouses or families of employees of one gender where the same benefits are not made available for the...

  10. Fringing field measurement of dipole magnet

    Lu Hongyou; Jiang Weisheng; Mao Naifeng; Mao Xingwang

    1985-01-01

    The fringing field of a dipole magnet with a C-type circuit and homogeneous field in the gap has been measured including the distributions of fringing fields with and without magnetic shield. The measured data was analyzed by using the concept of virtual field boundary

  11. Estimation of fringe orientation for optical fringe patterns with poor quality based on Fourier transform.

    Tang, Chen; Wang, Zhifang; Wang, Linlin; Wu, Jian; Gao, Tao; Yan, Si

    2010-02-01

    Fringe orientation represents an important property of fringes. The estimation of orientation from a poor quality fringe image is still a challenging problem faced in this area. This paper introduces a new approach for estimating optical fringe orientation with a poor quality image. This approach is based on the power spectrum analysis of the Fourier transform. We evaluate the performance of this algorithm via application to a variety of test cases and comparison with the widely used gradient-based method and accumulate-differences method. The experimental results show that our method is capable of calculating fringe orientation robustly even when the quality of fringe images is considerably low because of high or low density, high noise, and low contrast. Under the same conditions, our accuracy is even better than that obtained with the gradient-based and accumulate-differences methods, especially for fringe images with poor quality.

  12. AN EXPERIMENT WITH THE USE OF PREDICATE TRANSFORMERS IN UNITY

    DIJKSTRA, RM

    1995-01-01

    Recent work on UNITY is directed towards replacing the relations from UNITY logic by predicated transformers. In one of his Notes on UNITY. Jayadev Misra uses UNITY logic to prove a theorem about dynamic graphs. In this paper we use predicate transformers to prove the same theorem. We consider the

  13. Towards accurate simulation of fringe field effects

    Berz, M.; Erdelyi, B.; Makino, K.

    2001-01-01

    In this paper, we study various fringe field effects. Previously, we showed the large impact that fringe fields can have on certain lattice scenarios of the proposed Neutrino Factory. Besides the linear design of the lattice, the effects depend strongly on the details of the field fall off. Various scenarios are compared. Furthermore, in the absence of detailed information, we study the effects for the LHC, a case where the fringe fields are known, and try to draw some conclusions for Neutrino Factory lattices

  14. Simplified fringe order correction for absolute phase maps recovered with multiple-spatial-frequency fringe projections

    Ding, Yi; Peng, Kai; Lu, Lei; Zhong, Kai; Zhu, Ziqi

    2017-01-01

    Various kinds of fringe order errors may occur in the absolute phase maps recovered with multi-spatial-frequency fringe projections. In existing methods, multiple successive pixels corrupted by fringe order errors are detected and corrected pixel-by-pixel with repeating searches, which is inefficient for applications. To improve the efficiency of multiple successive fringe order corrections, in this paper we propose a method to simplify the error detection and correction by the stepwise increasing property of fringe order. In the proposed method, the numbers of pixels in each step are estimated to find the possible true fringe order values, repeating the search in detecting multiple successive errors can be avoided for efficient error correction. The effectiveness of our proposed method is validated by experimental results. (paper)

  15. 41 CFR 101-4.525 - Fringe benefits.

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Fringe benefits. 101-4... in Employment in Education Programs or Activities Prohibited § 101-4.525 Fringe benefits. (a) “Fringe benefits” defined. For purposes of these Title IX regulations, fringe benefits means: Any medical, hospital...

  16. Construction of Scaling Partitions of Unity

    Ole Christensen

    2017-11-01

    Full Text Available Partitions of unity in ℝd formed by (matrix scales of a fixed function appear in many parts of harmonic analysis, e.g., wavelet analysis and the analysis of Triebel-Lizorkin spaces. We give a simple characterization of the functions and matrices yielding such a partition of unity. For expanding matrices, the characterization leads to easy ways of constructing appropriate functions with attractive properties like high regularity and small support. We also discuss a class of integral transforms that map functions having the partition of unity property to functions with the same property. The one-dimensional version of the transform allows a direct definition of a class of nonuniform splines with properties that are parallel to those of the classical B-splines. The results are illustrated with the construction of dual pairs of wavelet frames.

  17. Fringe pattern denoising using coherence-enhancing diffusion.

    Wang, Haixia; Kemao, Qian; Gao, Wenjing; Lin, Feng; Seah, Hock Soon

    2009-04-15

    Electronic speckle pattern interferometry is one of the methods measuring the displacement on object surfaces in which fringe patterns need to be evaluated. Noise is one of the key problems affecting further processing and reducing measurement quality. We propose an application of coherence-enhancing diffusion to fringe-pattern denoising. It smoothes a fringe pattern along directions both parallel and perpendicular to fringe orientation with suitable diffusion speeds to more effectively reduce noise and improve fringe-pattern quality. It is a generalized work of Tang's et al.'s [Opt. Lett.33, 2179 (2008)] model that only smoothes a fringe pattern along fringe orientation. Since our model diffuses a fringe pattern with an additional direction, it is able to denoise low-density fringes as well as improve denoising effectiveness for high-density fringes. Theoretical analysis as well as simulation and experimental verifications are addressed.

  18. An optoelectronic system for fringe pattern analysis

    Sciammarella, C. A.; Ahmadshahi, M.

    A system capable of retrieving and processing information recorded in fringe patterns is reported. The principal components are described as well as the architecture in which they are assembled. An example of application is given.

  19. Robust Fringe Projection Profilometry via Sparse Representation.

    Budianto; Lun, Daniel P K

    2016-04-01

    In this paper, a robust fringe projection profilometry (FPP) algorithm using the sparse dictionary learning and sparse coding techniques is proposed. When reconstructing the 3D model of objects, traditional FPP systems often fail to perform if the captured fringe images have a complex scene, such as having multiple and occluded objects. It introduces great difficulty to the phase unwrapping process of an FPP system that can result in serious distortion in the final reconstructed 3D model. For the proposed algorithm, it encodes the period order information, which is essential to phase unwrapping, into some texture patterns and embeds them to the projected fringe patterns. When the encoded fringe image is captured, a modified morphological component analysis and a sparse classification procedure are performed to decode and identify the embedded period order information. It is then used to assist the phase unwrapping process to deal with the different artifacts in the fringe images. Experimental results show that the proposed algorithm can significantly improve the robustness of an FPP system. It performs equally well no matter the fringe images have a simple or complex scene, or are affected due to the ambient lighting of the working environment.

  20. Fringe instability in constrained soft elastic layers.

    Lin, Shaoting; Cohen, Tal; Zhang, Teng; Yuk, Hyunwoo; Abeyaratne, Rohan; Zhao, Xuanhe

    2016-11-04

    Soft elastic layers with top and bottom surfaces adhered to rigid bodies are abundant in biological organisms and engineering applications. As the rigid bodies are pulled apart, the stressed layer can exhibit various modes of mechanical instabilities. In cases where the layer's thickness is much smaller than its length and width, the dominant modes that have been studied are the cavitation, interfacial and fingering instabilities. Here we report a new mode of instability which emerges if the thickness of the constrained elastic layer is comparable to or smaller than its width. In this case, the middle portion along the layer's thickness elongates nearly uniformly while the constrained fringe portions of the layer deform nonuniformly. When the applied stretch reaches a critical value, the exposed free surfaces of the fringe portions begin to undulate periodically without debonding from the rigid bodies, giving the fringe instability. We use experiments, theory and numerical simulations to quantitatively explain the fringe instability and derive scaling laws for its critical stress, critical strain and wavelength. We show that in a force controlled setting the elastic fingering instability is associated with a snap-through buckling that does not exist for the fringe instability. The discovery of the fringe instability will not only advance the understanding of mechanical instabilities in soft materials but also have implications for biological and engineered adhesives and joints.

  1. A plea for unity, by Leon Lederman

    Anon.

    1986-03-15

    Last November saw the 30th anniversary of the discovery of the antiproton using the Bevatron at the University of California's Lawrence Berkeley Laboratory (then called the Radiation Laboratory). Fermilab Director Leon Lederman was in sparkling form at the banquet, where in his inimitable way he made an impassioned plea for scientific unity in these difficult times.

  2. Religious Education in Syria: Unity and Difference

    Cardinal, Monique C.

    2009-01-01

    This article discusses the almost identical syllabuses of the Christian and Muslim religious education programmes of the Syrian Arab Republic. Content analysis of the students' textbooks and teachers' guides (in Arabic) reveals common themes of citizenship education and national unity. Classroom observations in Damascus also highlight how…

  3. A plea for unity, by Leon Lederman

    Anon.

    1986-01-01

    Last November saw the 30th anniversary of the discovery of the antiproton using the Bevatron at the University of California's Lawrence Berkeley Laboratory (then called the Radiation Laboratory). Fermilab Director Leon Lederman was in sparkling form at the banquet, where in his inimitable way he made an impassioned plea for scientific unity in these difficult times

  4. AFRICAN UNITY, IDENTITY AND DEVELOPMENT IN SOME ...

    Ike Odimegwu

    address contemporary issues in Africa such as unity, identity and development by ..... compulsory and the teaching of Igbo poetry should start from the. Nursery school so that interest .... He laments over the slavery of some. Africans. In fact, the ...

  5. Students Write: Pow-Wow Means Unity

    Kaydahzinne, Colleen

    1978-01-01

    Throughout America all tribes have united to restore the "Indianism" that was lost at the time of the captivity. "Pow-wow" is the Indian effort to enforce this unity. Pow-wow can be held at any time of the year, although holidays are a good time to have dances. This essay provides much detail on the costumes and customs of the…

  6. Fringe-period selection for a multifrequency fringe-projection phase unwrapping method

    Zhang, Chunwei; Zhao, Hong; Jiang, Kejian

    2016-01-01

    The multi-frequency fringe-projection phase unwrapping method (MFPPUM) is a typical phase unwrapping algorithm for fringe projection profilometry. It has the advantage of being capable of correctly accomplishing phase unwrapping even in the presence of surface discontinuities. If the fringe frequency ratio of the MFPPUM is too large, fringe order error (FOE) may be triggered. FOE will result in phase unwrapping error. It is preferable for the phase unwrapping to be kept correct while the fewest sets of lower frequency fringe patterns are used. To achieve this goal, in this paper a parameter called fringe order inaccuracy (FOI) is defined, dominant factors which may induce FOE are theoretically analyzed, a method to optimally select the fringe periods for the MFPPUM is proposed with the aid of FOI, and experiments are conducted to research the impact of the dominant factors in phase unwrapping and demonstrate the validity of the proposed method. Some novel phenomena are revealed by these experiments. The proposed method helps to optimally select the fringe periods and detect the phase unwrapping error for the MFPPUM. (paper)

  7. Principal-vector-directed fringe-tracking technique.

    Zhang, Zhihui; Guo, Hongwei

    2014-11-01

    Fringe tracking is one of the most straightforward techniques for analyzing a single fringe pattern. This work presents a principal-vector-directed fringe-tracking technique. It uses Gaussian derivatives for estimating fringe gradients and uses hysteresis thresholding for segmenting singular points, thus improving the principal component analysis method. Using it allows us to estimate the principal vectors of fringes from a pattern with high noise. The fringe-tracking procedure is directed by these principal vectors, so that erroneous results induced by noise and other error-inducing factors are avoided. At the same time, the singular point regions of the fringe pattern are identified automatically. Using them allows us to determine paths through which the "seed" point for each fringe skeleton is easy to find, thus alleviating the computational burden in processing the fringe pattern. The results of a numerical simulation and experiment demonstrate this method to be valid.

  8. Effects of diotic fringes on interaural disparity detection (L)

    Le Goff, Nicolas; Kohlrausch, Armin; Dau, Torsten

    2012-01-01

    Detection thresholds were measured for interaural time differences (ITDs) and interaural level differences (ILDs) that were carried by probe segments embedded in otherwise diotic broadband noise (fringe). The duration of the probe was varied between 5 and 200 ms, and the duration of the fringe...... was between 5 and 100 ms. Consistent with results of Akeroyd and Bernstein [(2001). J. Acoust. Soc. Am. 110, 2516-2526], it was found that a 5-ms fringe placed before a 5-ms probe (forward fringe) led to a larger threshold elevation than a 5-ms fringe placed after the probe (backward fringe). As suggested...... by Akeroyd and Bernstein, this effect was accounted for by a model providing an onset emphasis of a factor of 2. In contrast, for longer probe and fringe durations, which have not been tested before, a backward fringe had a stronger effect than a forward fringe. This surprising effect was accounted...

  9. Theorem on magnet fringe field

    Wei, Jie; Talman, R.

    1995-01-01

    Transverse particle motion in particle accelerators is governed almost totally by non-solenoidal magnets for which the body magnetic field can be expressed as a series expansion of the normal (b n ) and skew (a n ) multipoles, B y + iB x = summation(b n + ia n )(x + iy) n , where x, y, and z denote horizontal, vertical, and longitudinal (along the magnet) coordinates. Since the magnet length L is necessarily finite, deflections are actually proportional to ''field integrals'' such as bar BL ≡ ∫ B(x,y,z)dz where the integration range starts well before the magnet and ends well after it. For bar a n , bar b n , bar B x , and bar B y defined this way, the same expansion Eq. 1 is valid and the ''standard'' approximation is to neglect any deflections not described by this expansion, in spite of the fact that Maxwell's equations demand the presence of longitudinal field components at the magnet ends. The purpose of this note is to provide a semi-quantitative estimate of the importance of |Δp ∝ |, the transverse deflection produced by the ion-gitudinal component of the fringe field at one magnet end relative to |Δp 0 |, the total deflection produced by passage through the whole magnet. To emphasize the generality and simplicity of the result it is given in the form of a theorem. The essence of the proof is an evaluation of the contribution of the longitudinal field B x from the vicinity of one magnet end since, along a path parallel to the magnet axis such as path BC

  10. Fringes in FTIR spectroscopy revisited: understanding and modelling fringes in infrared spectroscopy of thin films.

    Konevskikh, Tatiana; Ponossov, Arkadi; Blümel, Reinhold; Lukacs, Rozalia; Kohler, Achim

    2015-06-21

    The appearance of fringes in the infrared spectroscopy of thin films seriously hinders the interpretation of chemical bands because fringes change the relative peak heights of chemical spectral bands. Thus, for the correct interpretation of chemical absorption bands, physical properties need to be separated from chemical characteristics. In the paper at hand we revisit the theory of the scattering of infrared radiation at thin absorbing films. Although, in general, scattering and absorption are connected by a complex refractive index, we show that for the scattering of infrared radiation at thin biological films, fringes and chemical absorbance can in good approximation be treated as additive. We further introduce a model-based pre-processing technique for separating fringes from chemical absorbance by extended multiplicative signal correction (EMSC). The technique is validated by simulated and experimental FTIR spectra. It is further shown that EMSC, as opposed to other suggested filtering methods for the removal of fringes, does not remove information related to chemical absorption.

  11. Simplified absolute phase retrieval of dual-frequency fringe patterns in fringe projection profilometry

    Lu, Jin; Mo, Rong; Sun, Huibin; Chang, Zhiyong; Zhao, Xiaxia

    2016-04-01

    In fringe projection profilometry, a simplified method is proposed to recover absolute phase maps of two-frequency fringe patterns by using a unique mapping rule. The mapping rule is designed from the rounded phase values to the fringe order of each pixel. Absolute phase can be recovered by the fringe order maps. Unlike the existing techniques, where the lowest frequency of dual- or multiple-frequency fringe patterns must be single, the presented method breaks the limitation and simplifies the procedure of phase unwrapping. Additionally, due to many issues including ambient light, shadow, sharp edges, step height boundaries and surface reflectivity variations, a novel framework of automatically identifying and removing invalid phase values is also proposed. Simulations and experiments have been carried out to validate the performances of the proposed method.

  12. 3D phase-shifting fringe projection system on the basis of a tailored free-form mirror.

    Zwick, Susanne; Heist, Stefan; Steinkopf, Ralf; Huber, Sandra; Krause, Sylvio; Bräuer-Burchardt, Christian; Kühmstedt, Peter; Notni, Gunther

    2013-05-10

    Phase-shifting fringe projection is an effective method to perform 3D shape measurements. Conventionally, fringe projection systems utilize a digital projector that images fringes into the measurement plane. The performance of such systems is limited to the visible spectral range, as most projectors experience technical limitations in UV or IR spectral ranges. However, for certain applications these spectral ranges are of special interest. We present a wideband fringe projector that has been developed on the basis of a picture generating beamshaping mirror. This mirror generates a sinusoidal fringe pattern in the measurement plane without any additional optical elements. Phase shifting is realized without any mechanical movement by a multichip LED. As the system is based on a single mirror, it is wavelength-independent in a wide spectral range and therefore applicable in UV and IR spectral ranges. We present the design and a realized setup of this fringe projection system and the characterization of the generated intensity distribution. Experimental results of 3D shape measurements are presented.

  13. Maritime Coalitions: When is Unity of Command Required

    Gahlinger, Gregory J

    2007-01-01

    .... The concepts of Unity of Command, Unity of Effort and Parallel, Lead Nation, or Integrated coalition command structures are viable across a broad spectrum of maritime coalition operations but do have...

  14. Computer-assisted techniques to evaluate fringe patterns

    Sciammarella, Cesar A.; Bhat, Gopalakrishna K.

    1992-01-01

    Strain measurement using interferometry requires an efficient way to extract the desired information from interferometric fringes. Availability of digital image processing systems makes it possible to use digital techniques for the analysis of fringes. In the past, there have been several developments in the area of one dimensional and two dimensional fringe analysis techniques, including the carrier fringe method (spatial heterodyning) and the phase stepping (quasi-heterodyning) technique. This paper presents some new developments in the area of two dimensional fringe analysis, including a phase stepping technique supplemented by the carrier fringe method and a two dimensional Fourier transform method to obtain the strain directly from the discontinuous phase contour map.

  15. Modeling aerobic biodegradation in the capillary fringe.

    Luo, Jian; Kurt, Zohre; Hou, Deyi; Spain, Jim C

    2015-02-03

    Vapor intrusion from volatile subsurface contaminants can be mitigated by aerobic biodegradation. Laboratory column studies with contaminant sources of chlorobenzene and a mixture of chlorobenzene, 1,2-dichlorobenzene, and 1,4-dichlorobenzene showed that contaminants were rapidly degraded in thin reactive zones with high biomass and low substrate concentrations in the vicinity of the capillary fringe. Such behavior was well characterized by a model that includes oxygen-, substrate-, and biomass-dependent biodegradation kinetics along with diffusive transport processes. An analytical solution was derived to provide theoretical support for the simplification of reaction kinetics and the approximation of reactive zone location and mass flux relationships at steady state. Results demonstrate the potential of aerobic natural attenuation in the capillary fringe for preventing contaminant migration in the unsaturated zone. The solution indicates that increasing contaminant mass flux into the column creates a thinner reactive zone and pushes it toward the oxygen boundary, resulting in a shorter distance to the oxygen source and a larger oxygen mass flux that balances the contaminant mass flux. As a consequence, the aerobic biodegradation can reduce high contaminant concentrations to low levels within the capillary fringe and unsaturated zone. The results are consistent with the observations of thin reactive layers at the interface in unsaturated zones. The model considers biomass while including biodegradation in the capillary fringe and unsaturated zone and clearly demonstrates that microbial communities capable of using the contaminants as electron donors may lead to instantaneous degradation kinetics in the capillary fringe and unsaturated zone.

  16. Learn Unity 4 for iOS game development

    Chu, Philip

    2013-01-01

    The only book on Unity 4 game development The only up-to-date book on Unity for iOS Philip Chu is the author of a very popular online Unity tutorial, frequently recommended on sites like StackOverflow

  17. PERSPECTIVE: Fire on the fringe

    Pyne, Stephen J.

    2009-09-01

    upgraded by further research, could solve. The drivers behind sprawl were fundamentally irrational: they resided in such inchoate urgings as aesthetics, a desire to `live in nature', a longing for personal privacy and social isolation. Correction required the imposition of science-based reason onto the scene, which argued for research. What you propose as a solution depends on how you define the problem. Houses were burning and residents too often dying; this was clearly a threat to public safety, an incitement for political action, and an incentive for research. But what were the causes? Scholarly disciplines and national traditions defined it differently. Europeans thought the issue fundamentally social. The breakdown in the old landscape created a disorder of which free-burning fire was a manifestation. This was in keeping with a long heritage of European thinking that identified fire with unrest and that argued that fire control was primarily a matter of social control. People needed to reassert their presence on the land. Those countries with large public estates such as Australia and the US conceived the problem in a converse way. At issue was the unwise (and unwarranted) encroachment of people into the bush. An ideal response would be to banish people from the fringe regions. Fire is `natural' and belongs in wildlands: it is people who upset the order of things. While government has a duty to shield its citizens from harm, it should not allow such measures to destroy nature preserves or the capacity of fire to propagate through them. People have to learn to `live with' fire. In both cases the prevailing assumption is that science will identify solutions, which society will apply. Yet here we have a case of countries implicitly pointing their national sciences in different directions because of their distinctive histories. It would seem that history as a discipline might also have something to contribute to this discourse both in terms of tracking land use and of

  18. Fringe image analysis based on the amplitude modulation method.

    Gai, Shaoyan; Da, Feipeng

    2010-05-10

    A novel phase-analysis method is proposed. To get the fringe order of a fringe image, the amplitude-modulation fringe pattern is carried out, which is combined with the phase-shift method. The primary phase value is obtained by a phase-shift algorithm, and the fringe-order information is encoded in the amplitude-modulation fringe pattern. Different from other methods, the amplitude-modulation fringe identifies the fringe order by the amplitude of the fringe pattern. In an amplitude-modulation fringe pattern, each fringe has its own amplitude; thus, the order information is integrated in one fringe pattern, and the absolute fringe phase can be calculated correctly and quickly with the amplitude-modulation fringe image. The detailed algorithm is given, and the error analysis of this method is also discussed. Experimental results are presented by a full-field shape measurement system where the data has been processed using the proposed algorithm. (c) 2010 Optical Society of America.

  19. Spectral dispersion and fringe detection in IOTA

    Traub, W. A.; Lacasse, M. G.; Carleton, N. P.

    1990-01-01

    Pupil plane beam combination, spectral dispersion, detection, and fringe tracking are discussed for the IOTA interferometer. A new spectrometer design is presented in which the angular dispersion with respect to wavenumber is nearly constant. The dispersing element is a type of grism, a series combination of grating and prism, in which the constant parts of the dispersion add, but the slopes cancel. This grism is optimized for the display of channelled spectra. The dispersed fringes can be tracked by a matched-filter photon-counting correlator algorithm. This algorithm requires very few arithmetic operations per detected photon, making it well-suited for real-time fringe tracking. The algorithm is able to adapt to different stellar spectral types, intensity levels, and atmospheric time constants. The results of numerical experiments are reported.

  20. Pendellosung fringes of silicon at low temperatures

    Soejima, Y.; Eto, T.; Naruoka, H.; Lu, Z.; Okazaki, A.

    1997-01-01

    The crystal structure o silicon has been examined by means of X-ray diffraction according to the Pendellosung method. Measurements of the fringe pattern were made for the 111, 220, 113, 004, 331, 224 and 333 diffractions in a temperature range 17-300 K. It is found that the value of the Debye temperature determined from the temperature dependence of the period of Pendellosung fringes is in good agreement with that in the literature except for the first three diffractions; for these with shorter scattering vectors, the value depends on specimen and, in some cases, is smaller than that in the literature and depends on the length of the scattering vector. It is also found that the fringe pattern is stress sensitive, and that the stress can be released at lowest temperatures. This phenomenon of a kind of aging is discussed in connection with a similar effect observed in the high-resolution measurement of the lattice spacing

  1. Gnosticism, church unity and the Nicene Creed

    C. F.C. Coetzee

    2008-07-01

    Full Text Available Gnosticism (derived from the Greek word “gnosis; knowledge” is the well-known phenomenon or movement which dates from the first centuries of church history. The teaching of Gnosticism questioned and/or contradicted the teaching of the church on some of the fundamental truths of Scripture. Apart from Gnosticism, the Early Church also had to deal with the heresy of Arianism. In the Nicene Creed, formulated by the councils of Nicea (325 AD and Constantinople (381 AD the universal or catholic church responded officially to the heresies of both Gnosticism and Arianism. In the final edition of the Nicene Creed we also find an article on the unity, holiness, catholicity and apostolicity of the church. Both Gnosticism and Arianism posed a serious threat to the unity of the church.   In our times we experience a revival of ancient Gnosticism, both pagan and “Christian”. This revival is also called the New Age or the Age of Aquarius. Within the framework of this new worldview, we are witnessing a rediscovery of gnosis. The discovery and publication of certain ancient gnostic texts like the Nag Hammadi Codices, play a significant role in this revival. Consequently the canon of Scripture is questioned or openly rejected and also the creeds based on that Scripture.   The Nicene Creed played a major and decisive role in preserving and maintaining the unity of the church on the basis of the truth of Scripture. This age-old creed is today just as relevant and important in proclaiming and confessing the true faith and preserving the true unity of the church.

  2. Sustainable Urban Fringes - Connecting Urban and Rural : Final report of the SURF project

    Bruijn, de T.J.N.M. (Theo); Haccoû, H.A. (Huib); Leslie, A. (Allison); Lier, G. (Goos); Littlewood, S. (Stephan); Oldejans, R. (Rolf); Thomas, K. (Kevin); Vries, de B.J. (Bauke); Watt, E. (Emma); Wishardt, M. (Michelle)

    2012-01-01

    What happens at the urban edge and the SURF aspiration to influence it? Projects in the urban fringe Urban fringe governance Integrated policy guidelines and approaches towards urban fringe planning and management The future management of the urban fringe

  3. Temporal fringe pattern analysis with parallel computing

    Tuck Wah Ng; Kar Tien Ang; Argentini, Gianluca

    2005-01-01

    Temporal fringe pattern analysis is invaluable in transient phenomena studies but necessitates long processing times. Here we describe a parallel computing strategy based on the single-program multiple-data model and hyperthreading processor technology to reduce the execution time. In a two-node cluster workstation configuration we found that execution periods were reduced by 1.6 times when four virtual processors were used. To allow even lower execution times with an increasing number of processors, the time allocated for data transfer, data read, and waiting should be minimized. Parallel computing is found here to present a feasible approach to reduce execution times in temporal fringe pattern analysis

  4. 26 CFR 1.132-9 - Qualified transportation fringes.

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Qualified transportation fringes. 1.132-9... Qualified transportation fringes. (a) Table of contents. This section contains a list of the questions and answers in § 1.132-9. (1) General rules. Q-1. What is a qualified transportation fringe? Q-2. What is...

  5. 26 CFR 1.132-8 - Fringe benefit nondiscrimination rules.

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Fringe benefit nondiscrimination rules. 1.132-8... Fringe benefit nondiscrimination rules. (a) Application of nondiscrimination rules—(1) General rule. A.... (2) Consequences of discrimination—(i) In general. If an employer maintains more than one fringe...

  6. 29 CFR 4.170 - Furnishing fringe benefits or equivalents.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Furnishing fringe benefits or equivalents. 4.170 Section 4... Standards Compliance with Compensation Standards § 4.170 Furnishing fringe benefits or equivalents. (a) General. Fringe benefits required under the Act shall be furnished, separate from and in addition to the...

  7. 29 CFR 4.52 - Fringe benefit determinations.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Fringe benefit determinations. 4.52 Section 4.52 Labor... Procedures § 4.52 Fringe benefit determinations. (a) Wage determinations issued pursuant to the Service... differential, which are considered wages rather than fringe benefits under SCA). Pursuant to Section 4(b) of...

  8. 26 CFR 1.61-21 - Taxation of fringe benefits.

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Taxation of fringe benefits. 1.61-21 Section 1... § 1.61-21 Taxation of fringe benefits. (a) Fringe benefits—(1) In general. Section 61(a)(1) provides... vehicle. The fact that another section of subtitle A of the Internal Revenue Code addresses the taxation...

  9. 45 CFR 86.56 - Fringe benefits.

    2010-10-01

    ... available to employees or make fringe benefits available to spouses, families, or dependents of employees... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION NONDISCRIMINATION ON THE BASIS OF..., accident, life insurance or retirement benefit, service, policy or plan, any profit-sharing or bonus plan...

  10. The Offerings of Fringe Figures and Migrants

    Engels-Schwarzpaul, A.-Chr.

    2015-01-01

    "The Western tradition", as passe-partout, includes fringe figures, émigrés and migrants. Rather than looking to resources at the core of the Western tradition to overcome its own blindnesses, I am more interested in its gaps and peripheries, where other thoughts and renegade knowledges take hold. It is in the contact zones with…

  11. The psycholinguistic approach to unity and diversity The psycholinguistic approach to unity and diversity

    Leonor Scliar Cabral

    2008-04-01

    Full Text Available Some aspects of contemporary communication regarding unity and diversity will be examined as follows. On the one hand, globalization provided mainly by mass media, particularly by Internet and the on line electronic mail, will be scrutinized in relation to its psycholinguistic consequences: What are the differences that appear in human processing and how is the logical distinction between unity and diversity faced? How deep are the changes experienced by children, who are acquiring and learning their oral and written languages, using such media? On the other hand, despite globalization, the geometrical growth of science and technology brings with it a parallel lexical explosion: specific texts undermine the possibility of their comprehension by the outsider as if the text was written in a foreign language, and so, the unity of communication is broken and distortions may appear. Some aspects of contemporary communication regarding unity and diversity will be examined as follows. On the one hand, globalization provided mainly by mass media, particularly by Internet and the on line electronic mail, will be scrutinized in relation to its psycholinguistic consequences: What are the differences that appear in human processing and how is the logical distinction between unity and diversity faced? How deep are the changes experienced by children, who are acquiring and learning their oral and written languages, using such media? On the other hand, despite globalization, the geometrical growth of science and technology brings with it a parallel lexical explosion: specific texts undermine the possibility of their comprehension by the outsider as if the text was written in a foreign language, and so, the unity of communication is broken and distortions may appear.

  12. The unity of Luke-Acts

    J. Verheyden

    1999-12-01

    Full Text Available The article contains a summary of contributions delivered at he 47th Colloquium Biblicum Lovaniense (1998 held at the Catholic University, Leuven on the subject: "The unity of Luke-Acts". The opening address was delivered by J Verheyden (Leuven on "The Unity of Luke and Acts: What are we up to?". The contributors were: J Kremer (Vienna - "Die dreifache Wiedergabe des Damaskuserlebnis Pauli in der Apostelgeschichte: Eine Hilfe für das rechte Verständnis der lukanischen Osterevangelien"; D Marguerat (Lausanne -"Jusqu' où faut-il parler d'une "unité". Luc-Actes? Continuity et ruptures dans I'ævre de Luc"; JDelobel (Leuven - "The text of Luke-Acts: A confrontation of recent theories"; R L Brawley (Chicago - "Abrahamic covenant traditions and the characterization of God in Luke-Acts"; F W Horn (Mainz - "Die Haltung des Lukas zum römischen Staat im Evangelium und in der Apostelgeschichte"; J A Fitzmyer (Washington - "The role of theSpirit in Luke-Acts"; M Rese (Munster - "The Jews in Luke-Acts: Some secondthoughts"; J Taylor (Jerusalem - "La fraction du pain en Luc-Actes"; W Radl (Augs-burg - "Die Beziehungen der Vorgeschichte zur Apostelgeschichte, dargestellt an Lk 2:22-39; F Neirynck (Leuven - "Luke 4:16-30 and the unity of Luke-Acts"; C M Tuckett (Oxford - "The Christology of Luke-Acts"; O Mainville (Montreal - "Le messianisme de Jésus: Le rapport announce/accomplissement entre Lc 1,35 et Ac 2,33"; A Lindemann (Bethel-Bielefeld - "Form und Funktion von Reden und Wundererzählungen im Lukas-evangelium und in der Apostelgeschichte", A Denaux - The theme of divine visits and human (inhospitability in Luke-Acts and its Old Testament and Graeco-Roman antecedents.

  13. Artificial Intelligence in Unity Game Engine

    Yu, Li

    2017-01-01

    This thesis was conducted for Oulu Game Lab. The aim of this bachelor thesis was to develop in Oulu Game Lab a game called the feels good to be evil. The main purpose of the project was to develop a game and learn game development focus in the artificial intelligence area. This thesis has explained the theory behind Artificial Intelligence. The game was developed in Unity Game Engine with C# language, and also Panda Behavior Tree was used in this project as an asset. The result was the ...

  14. Quality-guided orientation unwrapping for fringe direction estimation.

    Wang, Haixia; Kemao, Qian

    2012-02-01

    Fringe patterns produced by various optical interferometric techniques encode information such as shape, deformation, and refractive index. Denoising and demodulation are two important procedures to retrieve information from a single closed fringe pattern. Various existing denoising and demodulation techniques require fringe direction/orientation during the processing. Fringe orientation is often easier to obtain but fringe direction is needed in some demodulation techniques. A quality-guided orientation unwrapping scheme is proposed to estimate direction from orientation. Two techniques, one based on windowed Fourier ridges and the other based on fringe gradient, are proposed for the quality-guided orientation unwrapping scheme. The direction qualities are compared for both simulated and experimental fringe patterns. Their application to demodulation technique is also given.

  15. Physical interpretation of the fringe shift measured on Michelson interferometer in optical media

    Demjanov, V.V.

    2010-01-01

    The shift of the interference fringe in the Michelson interferometer is absent in vacuum but present in measurements performed in dielectric media with the refractive index greater than unity. This experimental observation induced me to interpret physical processes occurred in the Michelson interferometer in a conceptually new way. I rejected the generally accepted additive rule c±v for composition of the velocity v of the inertial body and the speed c of light as inapplicable in principle to non-inertial objects which electromagnetic waves just belong to. I used instead the non-relativistic formula of Fresnel for drag of light by a moving optical medium. This formula, and taking into account the physical effect of Lorentz contraction of the arm of interferometer, enabled me to construct the theoretical model that reproduces in essential features the parabolic dependence of the shift of the interference fringe on the dielectric permittivity of the light-carrying material. The Earth's speed relative to aether found from the experimental curve was estimated as 140-480 km/s. The range of the values refers to the projection of the speed on the horizontal plane of the experimental setup measured at various time of day and night.

  16. Toward Unity of Command for Multinational Air Forces

    Asjes, David

    1998-01-01

    To assure unity of command in future multinational air operations, combatant commanders must embrace the necessity of multinational air forces, maximize the integration of allied officers within air...

  17. Fringe Benefits Provision by Rural Small Businesses

    Jayachandran N. Variyam; David S. Kraybill

    1998-01-01

    We examine the relationship between employer size and the provision of fringe benefits in a large sample of rural businesses. A clear employer size-benefits relationship exists only in the case of health insurance, while other benefits are not strongly linked to employer size. The negative relationship between employer size and health insurance is weaker, though still existent, in businesses whose employees have relatively high skill levels. Single, independent establishments and sole proprie...

  18. Effective wavelength calibration for moire fringe projection

    Purcell, Daryl; Davies, Angela; Farahi, Faramarz

    2006-01-01

    The fringe patterns seen when using moire instruments are similar to the patterns seen in traditional interferometry but differ in the spacing between consecutive fringes. In traditional interferometry, the spacing is constant and related to the wavelength of the source. In moire fringe projection, the spacing (the effective wavelength) may not be constant over the field of view and the spacing depends on the system geometry. In these cases, using a constant effective wavelength over the field of view causes inaccurate surface height measurements. We examine the calibration process of the moirefringe projection measurement, which takes this varying wavelength into account to produce a pixel-by-pixel wavelength map. The wavelength calibration procedure is to move the object in the out-of-plane direction a known distance until every pixel intensity value goes through at least one cycle. A sinusoidal function is then fit to the data to extract the effective wavelength pixel by pixel, yielding an effective wavelength map. A calibrated step height was used to validate the effective wavelength map with results within 1% of the nominal value of the step height. The error sources that contributed to the uncertainty in determining the height of the artifact are also investigated

  19. Fringe order error in multifrequency fringe projection phase unwrapping: reason and correction.

    Zhang, Chunwei; Zhao, Hong; Zhang, Lu

    2015-11-10

    A multifrequency fringe projection phase unwrapping algorithm (MFPPUA) is important to fringe projection profilometry, especially when a discontinuous object is measured. However, a fringe order error (FOE) may occur when MFPPUA is adopted. An FOE will result in error to the unwrapped phase. Although this kind of phase error does not spread, it brings error to the eventual 3D measurement results. Therefore, an FOE or its adverse influence should be obviated. In this paper, reasons for the occurrence of an FOE are theoretically analyzed and experimentally explored. Methods to correct the phase error caused by an FOE are proposed. Experimental results demonstrate that the proposed methods are valid in eliminating the adverse influence of an FOE.

  20. Determination of Stress Intensity Factor K1 from Two Fringe Orders by Fringe Multiplication and Sharpening

    Chen, Lei; Baek, Tae Hyun

    2007-01-01

    Stress intensity factor is one of the most important parameters in fracture mechanics. Both the stress field distribution and the crack propagation are closely related to these parameters. Due to the complexity of actual engineering problems, it is difficult to calculate the stress intensity factor by theoretical formulation, so photoelasticity method is a good choice. In this paper, modified two parameter method is employed to calculate stress intensity factor for opening mode by using data from more than one photoelastic fringe loop. For getting accurate experiment results, the initial fringes are doubled and sharpened by digital image programs from the fringe patterns obtained by a CCD camera. Photoelastic results are compared with those obtained by the use of empirical equation and FEM. Good agreement shows that the methods utilized in experiments are considerably reliable. The photoelastic experiment can be used for bench mark in theoretical study and other experiments

  1. LineVISAR. A fringe-trace data analysis program

    Furnish, Michael D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-02-01

    The line-imaging ORVIS or VISAR provides velocity as a function of position and time for a line on an experimental setup via a streak camera record of interference fringes. This document describes a Matlab-based program which guides the user through the process of converting these fringe data to a velocity surface. The data reduction is of the "fringe trace" type, wherein the changes in velocity at a given position on the line are calculated based on fringe motion past that point. The analyst must establish the fringe behavior up front, aided by peak-finding routines in the program. However, the later work of using fringe jumps to compensate for phase problems in other analysis techniques is greatly reduced. This program is not a standard GUI construction, and is prescriptive. At various points it saves the progress, allowing later restarts from those points.

  2. Social Studies Education as Means to National Integration and Unity ...

    The current wave of ethnic sentiments, loyalties, and violence in Nigeria cannot be overemphasized and if not checked, it may undermine the unity of the entire country. Here, we explore the use of social studies education as means by which Nigeria can obtain the much needed national unity, integration and stability.

  3. 29 CFR 5.25 - Rate of contribution or cost for fringe benefits.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Rate of contribution or cost for fringe benefits. 5.25... Fringe Benefits Provisions of the Davis-Bacon Act § 5.25 Rate of contribution or cost for fringe benefits... contribution or cost of fringe benefits. Only the amount of contributions or costs for fringe benefits which...

  4. Unity connecting module lowered to new site in SSPF

    1998-01-01

    In the Space Station Processing Facility (SSPF), the Unity connecting module, part of the International Space Station, is lowered to its new location in the SSPF. In the background, visitors watch through a viewing window, part of the visitors tour at the Center. As the primary payload on mission STS-88, scheduled to launch Dec. 3, 1998, Unity will be mated to the Russian-built Zarya control module which should already be in orbit at that time. In the SSPF, Unity is undergoing testing such as the Pad Demonstration Test to verify the compatibility of the module with the Space Shuttle, as well as the ability of the astronauts to send and receive commands to Unity from the flight deck of the orbiter, and the common berthing mechanism to which other space station elements will dock. Unity is expected to be ready for installation into the Shuttle's payload canister on Oct. 25, and transported to Launch Pad 39-A on Oct. 27.

  5. Unity connecting module placed in new site in SSPF

    1998-01-01

    The Unity connecting module, part of the International Space Station, is placed in a work station in the Space Station Processing Facility (SSPF). As the primary payload on mission STS-88, scheduled to launch Dec. 3, 1998, Unity will be mated to the Russian-built Zarya control module which should already be in orbit at that time. In the SSPF, Unity is undergoing testing such as the Pad Demonstration Test to verify the compatibility of the module with the Space Shuttle, as well as the ability of the astronauts to send and receive commands to Unity from the flight deck of the orbiter, and the common berthing mechanism to which other space station elements will dock. Unity is expected to be ready for installation into the Shuttle's payload canister on Oct. 25, and transported to Launch Pad 39-A on Oct. 27.

  6. Effect of low-frequency vibrations on speckle interferometry fringes

    Vikram, C.S.; Pechersky, M.J.

    1998-01-01

    The effects of low-frequency vibrations on speckle correlation fringes have been investigated. The relatively short capture time of the camera in the low-frequency case may yield usable fringe contrast in spite of vibration. It has been shown that the fringes also shift due to the vibration. The study is in agreement with experimental observations of good-contrast correlation fringes even if the object is not on a vibration-isolated table. Some such experimental observations are also presented. copyright 1998 Society of Photo-Optical Instrumentation Engineers

  7. Does Gender Influence the Provision of Fringe Benefits?

    Rand, John; Tarp, Finn

    2011-01-01

    This contribution studies the provision of fringe benefits using a unique survey of small and medium-sized enterprises (SMEs) in Vietnam. Analysis of the survey reveals that women who own SMEs are more likely than men who own similar firms to provide employees with fringe benefits such as annual...... and workforce structure, worker recruitment mechanisms, and the degree of unionization. However, these factors cannot fully account for the observed differences in fringe benefits along the “gender of owner” dimension. There remains a sizable and unexplained fringe benefits premium paid to employees in women...

  8. Fringe projection profilometry with portable consumer devices

    Liu, Danji; Pan, Zhipeng; Wu, Yuxiang; Yue, Huimin

    2018-01-01

    A fringe projection profilometry (FPP) using portable consumer devices is attractive because it can realize optical three dimensional (3D) measurement for ordinary consumers in their daily lives. We demonstrate a FPP using a camera in a smart mobile phone and a digital consumer mini projector. In our experiment of testing the smart phone (iphone7) camera performance, the rare-facing camera in the iphone7 causes the FPP to have a fringe contrast ratio of 0.546, nonlinear carrier phase aberration value of 0.6 rad, and nonlinear phase error of 0.08 rad and RMS random phase error of 0.033 rad. In contrast, the FPP using the industrial camera has a fringe contrast ratio of 0.715, nonlinear carrier phase aberration value of 0.5 rad, nonlinear phase error of 0.05 rad and RMS random phase error of 0.011 rad. Good performance is achieved by using the FPP composed of an iphone7 and a mini projector. 3D information of a facemask with a size for an adult is also measured by using the FPP that uses portable consumer devices. After the system calibration, the 3D absolute information of the facemask is obtained. The measured results are in good agreement with the ones that are carried out in a traditional way. Our results show that it is possible to use portable consumer devices to construct a good FPP, which is useful for ordinary people to get 3D information in their daily lives.

  9. Streak camera recording of interferometer fringes

    Parker, N.L.; Chau, H.H.

    1977-01-01

    The use of an electronic high-speed camera in the streaking mode to record interference fringe motion from a velocity interferometer is discussed. Advantages of this method over the photomultiplier tube-oscilloscope approach are delineated. Performance testing and data for the electronic streak camera are discussed. The velocity profile of a mylar flyer accelerated by an electrically exploded bridge, and the jump-off velocity of metal targets struck by these mylar flyers are measured in the camera tests. Advantages of the streak camera include portability, low cost, ease of operation and maintenance, simplified interferometer optics, and rapid data analysis

  10. Adaptive DFT-Based Interferometer Fringe Tracking

    Wilson, Edward; Pedretti, Ettore; Bregman, Jesse; Mah, Robert W.; Traub, Wesley A.

    2005-12-01

    An automatic interferometer fringe tracking system has been developed, implemented, and tested at the Infrared Optical Telescope Array (IOTA) Observatory at Mount Hopkins, Arizona. The system can minimize the optical path differences (OPDs) for all three baselines of the Michelson stellar interferometer at IOTA. Based on sliding window discrete Fourier-transform (DFT) calculations that were optimized for computational efficiency and robustness to atmospheric disturbances, the algorithm has also been tested extensively on offline data. Implemented in ANSI C on the 266 MHz PowerPC processor running the VxWorks real-time operating system, the algorithm runs in approximately [InlineEquation not available: see fulltext.] milliseconds per scan (including all three interferograms), using the science camera and piezo scanners to measure and correct the OPDs. The adaptive DFT-based tracking algorithm should be applicable to other systems where there is a need to detect or track a signal with an approximately constant-frequency carrier pulse. One example of such an application might be to the field of thin-film measurement by ellipsometry, using a broadband light source and a Fourier-transform spectrometer to detect the resulting fringe patterns.

  11. Adaptive DFT-Based Interferometer Fringe Tracking

    Wesley A. Traub

    2005-09-01

    Full Text Available An automatic interferometer fringe tracking system has been developed, implemented, and tested at the Infrared Optical Telescope Array (IOTA Observatory at Mount Hopkins, Arizona. The system can minimize the optical path differences (OPDs for all three baselines of the Michelson stellar interferometer at IOTA. Based on sliding window discrete Fourier-transform (DFT calculations that were optimized for computational efficiency and robustness to atmospheric disturbances, the algorithm has also been tested extensively on offline data. Implemented in ANSI C on the 266 MHz PowerPC processor running the VxWorks real-time operating system, the algorithm runs in approximately 2.0 milliseconds per scan (including all three interferograms, using the science camera and piezo scanners to measure and correct the OPDs. The adaptive DFT-based tracking algorithm should be applicable to other systems where there is a need to detect or track a signal with an approximately constant-frequency carrier pulse. One example of such an application might be to the field of thin-film measurement by ellipsometry, using a broadband light source and a Fourier-transform spectrometer to detect the resulting fringe patterns.

  12. Learning C# by developing games with Unity 3D

    Norton, Terry

    2013-01-01

    This book uses the learning-by-example approach. It takes simple examples from games to introduce all the main concepts of programming in an easy-to-digest and immediately recognizable way.This book is for the total beginner to any type of programming, focusing on the writing of C# code and scripts only. There are many parts that make up the Unity game engine. It is assumed that the reader already knows their way around Unity's user interface. The code editor used in this book is the MonoDevelop editor supplied by Unity.

  13. The Gender Pay Gap, Fringe Benefits, and Occupational Crowding.

    Solberg, Eric; Laughlin, Teresa

    1995-01-01

    In estimating earnings equations for seven occupations, when fringe benefits are excluded, women receive significantly lower wages in all but the most female-dominated occupation. Including fringe benefits makes gender significant in only one occupational category. Crowding of one gender into an occupation appears the primary determinant of the…

  14. A general theory of interference fringes in x-ray phase grating imaging

    Yan, Aimin; Wu, Xizeng; Liu, Hong

    2015-01-01

    Purpose: The authors note that the concept of the Talbot self-image distance in x-ray phase grating interferometry is indeed not well defined for polychromatic x-rays, because both the grating phase shift and the fractional Talbot distances are all x-ray wavelength-dependent. For x-ray interferometry optimization, there is a need for a quantitative theory that is able to predict if a good intensity modulation is attainable at a given grating-to-detector distance. In this work, the authors set out to meet this need. Methods: In order to apply Fourier analysis directly to the intensity fringe patterns of two-dimensional and one-dimensional phase grating interferometers, the authors start their derivation from a general phase space theory of x-ray phase-contrast imaging. Unlike previous Fourier analyses, the authors evolved the Wigner distribution to obtain closed-form expressions of the Fourier coefficients of the intensity fringes for any grating-to-detector distance, even if it is not a fractional Talbot distance. Results: The developed theory determines the visibility of any diffraction order as a function of the grating-to-detector distance, the phase shift of the grating, and the x-ray spectrum. The authors demonstrate that the visibilities of diffraction orders can serve as the indicators of the underlying interference intensity modulation. Applying the theory to the conventional and inverse geometry configurations of single-grating interferometers, the authors demonstrated that the proposed theory provides a quantitative tool for the grating interferometer optimization with or without the Talbot-distance constraints. Conclusions: In this work, the authors developed a novel theory of the interference intensity fringes in phase grating x-ray interferometry. This theory provides a quantitative tool in design optimization of phase grating x-ray interferometers

  15. A general theory of interference fringes in x-ray phase grating imaging.

    Yan, Aimin; Wu, Xizeng; Liu, Hong

    2015-06-01

    The authors note that the concept of the Talbot self-image distance in x-ray phase grating interferometry is indeed not well defined for polychromatic x-rays, because both the grating phase shift and the fractional Talbot distances are all x-ray wavelength-dependent. For x-ray interferometry optimization, there is a need for a quantitative theory that is able to predict if a good intensity modulation is attainable at a given grating-to-detector distance. In this work, the authors set out to meet this need. In order to apply Fourier analysis directly to the intensity fringe patterns of two-dimensional and one-dimensional phase grating interferometers, the authors start their derivation from a general phase space theory of x-ray phase-contrast imaging. Unlike previous Fourier analyses, the authors evolved the Wigner distribution to obtain closed-form expressions of the Fourier coefficients of the intensity fringes for any grating-to-detector distance, even if it is not a fractional Talbot distance. The developed theory determines the visibility of any diffraction order as a function of the grating-to-detector distance, the phase shift of the grating, and the x-ray spectrum. The authors demonstrate that the visibilities of diffraction orders can serve as the indicators of the underlying interference intensity modulation. Applying the theory to the conventional and inverse geometry configurations of single-grating interferometers, the authors demonstrated that the proposed theory provides a quantitative tool for the grating interferometer optimization with or without the Talbot-distance constraints. In this work, the authors developed a novel theory of the interference intensity fringes in phase grating x-ray interferometry. This theory provides a quantitative tool in design optimization of phase grating x-ray interferometers.

  16. Automated Fringe Pattern Acquisition for Portable Laser Shearography

    Khairiah Yazid; Mohd Yusnisyam Yusof; Wan Saffiey Wan Abdullah

    2013-01-01

    In shearography system one of the most important tasks is the automatic, fast, reliable processing of the fringe patterns to allow real time inspection. Development of digital CCD cameras, the PC (fast and small data acquisition), high power lasers have led to dramatic performance improvements in shearography instruments and systems. This paper concentrates on development of fringe pattern acquisition using digital CCD camera for portable laser shearography system. A new program for fringe pattern processing which incorporates rapid methods for automatic fringe pattern acquisition and filtering has been developed. The algorithm is written using MATLAB. A graphical user interface with several functions was developed to ensure an easy adaptation in custom applications and providing a flexible way for additional functions. The preliminary results show that the developed algorithm can be used to generate good contrast and reliable fringe pattern. (author)

  17. Virtual fringe projection system with nonparallel illumination based on iteration

    Zhou, Duo; Wang, Zhangying; Gao, Nan; Zhang, Zonghua; Jiang, Xiangqian

    2017-01-01

    Fringe projection profilometry has been widely applied in many fields. To set up an ideal measuring system, a virtual fringe projection technique has been studied to assist in the design of hardware configurations. However, existing virtual fringe projection systems use parallel illumination and have a fixed optical framework. This paper presents a virtual fringe projection system with nonparallel illumination. Using an iterative method to calculate intersection points between rays and reference planes or object surfaces, the proposed system can simulate projected fringe patterns and captured images. A new explicit calibration method has been presented to validate the precision of the system. Simulated results indicate that the proposed iterative method outperforms previous systems. Our virtual system can be applied to error analysis, algorithm optimization, and help operators to find ideal system parameter settings for actual measurements. (paper)

  18. Micro analysis of fringe field formed inside LDA measuring volume

    Ghosh, Abhijit; Nirala, A K

    2016-01-01

    In the present study we propose a technique for micro analysis of fringe field formed inside laser Doppler anemometry (LDA) measuring volume. Detailed knowledge of the fringe field obtained by this technique allows beam quality, alignment and fringe uniformity to be evaluated with greater precision and may be helpful for selection of an appropriate optical element for LDA system operation. A complete characterization of fringes formed at the measurement volume using conventional, as well as holographic optical elements, is presented. Results indicate the qualitative, as well as quantitative, improvement of fringes formed at the measurement volume by holographic optical elements. Hence, use of holographic optical elements in LDA systems may be advantageous for improving accuracy in the measurement. (paper)

  19. Theory of Transcendent unity of Religion

    Hossein Ali Torkamany

    2015-09-01

    Full Text Available This descriptive-analytic study by method in the form of a library in the field of Sciences of Quran and Hadith and suggests a new theory on difference of views about the religious judgments. The main problem is in one hand, the Quran's recognition of the plurality of religions in some verses and in other hand,the other verses those can be seen on the negation of religious plurality. In light of certain verses in this issue, some of thinkers have raised under different titles such as Traditionalism or religious pluralism and the unity of religions and religious pluralism and so on. mentioned religions in Quran, are essentially same in the Islam and monotheism. Thus there are the consensus on essential unity of religions and disagreement onhistoric unity of religions that is a source of more disagreements and different issues. Quran has determined the "bestdispute" asa method of dealing with religious laws that requires faith to common elements that is the "Islam" , although the "bestdispute" in light of the transcendental unity. This means that "best dispute" is a line between practical and theoretical pluralism. Instead of denying the "people of the Book", you shouldtake "Astbqa on charity" or overtaking on virtues. The rule stated in the Qur'an can be call"penetration in religion" and through this we can have better understand of the Qur'an's emphasis on reinforcement the Torah and the Gospel. However It should not be as pluralists, we have means Islam as only a religion in other religions.according to the Qur'an, the Prophet is the witness of the Muslims and people of Islam are witnesses of other peoples. total of true and mystical interpretation of the verses with these verses that explain Muslim religious superiorityindicate that the teachings of Islam has started fromthe holy scriptures, but under the prestige and the testimony of the teachings of the Prophet can be searched. In the Quran, the Muslim community have been called "moderate

  20. Metric Structures on Fibered Manifolds Through Partitions of Unity

    Hulya Kadioglu

    2016-05-01

    Full Text Available The notion of partitions of unity is extremely useful as it allows one to extend local constructions on Euclidean patches to global ones. It is widely used in many fields in mathematics. Therefore, prolongation of this useful tool to another manifold may help constructing many geometric structures. In this paper, we construct a partition of unity on a fiber bundle by using a given partition of unity on the base manifold. On the other hand we show that the converse is also possible if it is a vector bundle. As an application, we define a Riemannian metric on the fiber bundle by using induced partition of unity on the fiber bundle.

  1. Location based augmented reality application on Unity 3D

    Serra Font, Antoni

    2013-01-01

    This document presents the development and steps taken in order to create an augmented reality application using the Unity 3D software using a mobile handheld device. The steps of the development will be explained and the performance evaluated.

  2. Spirituality of unity in management - Economy of Communion

    Stanisław Grochmal

    2016-12-01

    Full Text Available The spirituality of unity in management processes is presented in the paper. The idea of the Economy of Communion (EoC project and its realization in more than 800 businesses worldwide as an example of the striving for the eradication of poverty and new style of management is analysed. As an implementation of spirituality in management process, a new paradigm of unity in management sciences is proposed. On the basis of analysis of literature and discussions with experts and entrepreneurs of EoC businesses, six content dimensions of the paradigm of unity are formulated and the empirical research on the evaluation of these dimensions by testing the entrepreneurs of 110 businesses from 22 countries as well the management experts is considered. This research allowed verifying the hypothesis that the paradigm of unity shapes a new organizational culture by the creation of a suitable organizational climate in the EoC businesses.

  3. Unity of Command in Afghanistan: A Forsaken Principle of War

    Hope, Ian

    2008-01-01

    ... in the evolution of military command for Afghanistan. It examines how there was an unprecedented departure from the principle of unity of command in Afghanistan in 2006, when Combined Forces Command-Afghanistan (CFC...

  4. Unity of Command in Afghanistan: A Forsaken Principle of War

    Hope, Ian

    2008-01-01

    ... of military command for Afghanistan. It examines the unprecedented departure from the principle of unity of command in Afghanistan in 2006, when Combined Forces Command-Afghanistan passed control of the ground fight to the International...

  5. VR plugin: a Virtual Reality plugin for unity applications

    Troya Moreno, Jorge

    2017-01-01

    Software development for Virtual Reality (VR) has been popularized in 2016, alongside products such as Unity 3D and Oculus, especially in fields such as video games, tourism, media and marketing. But software development for VR is complex because additional requirements must be added to software that are not normally required. Newcomers to the Decoroso Crespo Laboratory, who join new groups to develop VR software using Unity 3D as a development platform, find it difficult to integrate some of...

  6. Determination of localized visibility in off-axis electron holography

    McLeod, Robert A.; Kupsta, Martin; Malac, Marek

    2014-01-01

    Off-axis electron holography is a wavefront-split interference method for the transmission electron microscope that allows the phase shift and amplitude of the electron wavefront to be separated and quantitatively measured. An additional, third component of the holographic signal is the coherence of the electron wavefront. Historically, wavefront coherence has been evaluated by measurement of the holographic fringe visibility (or contrast) based on the minimum and maximum intensity values. We present a method based on statistical moments is presented that allows allow the visibility to be measured in a deterministic and reproducible fashion suitable for quantitative analysis. We also present an algorithm, based on the Fourier-ratio method, which allows the visibility to be resolved in two-dimensions, which we term the local visibility. The local visibility may be used to evaluate the loss of coherence due to electron scattering within a specimen, or as an aid in image analysis and segmentation. The relationship between amplitude and visibility may be used to evaluate the composition and mass thickness of a specimen by means of a 2-D histogram. Results for a selection of elements (C, Al, Si, Ti, Cr, Cu, Ge, and Au) are provided. All presented visibility metrics are biased at low-dose conditions by the presence of shot-noise, for which we provide methods for empirical normalization to achieve linear response. - Highlights: • Report on a new statistical metric to determine holographic fringe visibility. • Adds new signal to electron holography: measure of electron coherence loss in 2-D. • Provide algorithm to calculate 2-D local visibility map. • Show that amplitude and visibility may be used for compositional analysis and segmentation. • Corrected for data bias such as shot noise

  7. Review: Pierre Englebert, Africa: Unity, Sovereignty, and Sorrow (2009 Buchbesprechung: Pierre Englebert, Africa: Unity, Sovereignty, and Sorrow (2009

    Thomas Bierschenk

    2010-01-01

    Full Text Available Review of the monograph: Pierre Englebert (2009, Africa: Unity, Sovereignty, and Sorrow, Boulder, Co. & London: Lynne Rienner Publishers, ISBN: 978-1-58826-646-0 (Hardcover / 978-1-58826-623-1 (Paperback, 310 pages. Besprechung der Monographie: Pierre Englebert (2009, Africa: Unity, Sovereignty, and Sorrow, Boulder, Co. & London: Lynne Rienner Publishers, ISBN: 978-1-58826-646-0 (Hardcover / 978-1-58826-623-1 (Paperback, 310 Seiten.

  8. Fringing in MonoCam Y4 filter images

    Brooks, J.; Nomerotski, A.; Fisher-Levine, M.

    2017-01-01

    We study the fringing patterns observed in MonoCam, a camera with a single Large Synoptic Survey Telescope (LSST) CCD sensor. Images were taken at the U.S. Naval Observatory in Flagstaff, Arizona (NOFS) employing its 1.3 m telescope and an LSST y 4 filter. Fringing occurs due to the reflection of infrared light (700 nm or larger) from the bottom surface of the CCD which constructively or destructively interferes with the incident light to produce a net ''fringe'' pattern which is superimposed on all images taken. Emission lines from the atmosphere, dominated by hydroxyl (OH) spectra, can change in their relative intensities as the night goes on, producing different fringe patterns in the images taken. We found through several methods that the general shape of the fringe patterns remained constant, though with slight changes in the amplitude and phase of the fringes. We also found that a superposition of fringes from two monochromatic lines taken in the lab offered a reasonable description of the sky data.

  9. Colloid mobilization and transport during capillary fringe fluctuations.

    Aramrak, Surachet; Flury, Markus; Harsh, James B; Zollars, Richard L

    2014-07-01

    Capillary fringe fluctuations due to changing water tables lead to displacement of air-water interfaces in soils and sediments. These moving air-water interfaces can mobilize colloids. We visualized colloids interacting with moving air-water interfaces during capillary fringe fluctuations by confocal microscopy. We simulated capillary fringe fluctuations in a glass-bead-filled column. We studied four specific conditions: (1) colloids suspended in the aqueous phase, (2) colloids attached to the glass beads in an initially wet porous medium, (3) colloids attached to the glass beads in an initially dry porous medium, and (4) colloids suspended in the aqueous phase with the presence of a static air bubble. Confocal images confirmed that the capillary fringe fluctuations affect colloid transport behavior. Hydrophilic negatively charged colloids initially suspended in the aqueous phase were deposited at the solid-water interface after a drainage passage, but then were removed by subsequent capillary fringe fluctuations. The colloids that were initially attached to the wet or dry glass bead surface were detached by moving air-water interfaces in the capillary fringe. Hydrophilic negatively charged colloids did not attach to static air-bubbles, but hydrophobic negatively charged and hydrophilic positively charged colloids did. Our results demonstrate that capillary fringe fluctuations are an effective means for colloid mobilization.

  10. A new unity for angular measurements in strabismus

    Harley E. A. Bicas

    2014-10-01

    Full Text Available The practical advantages of quantifying an angle by a ratio of linear lengths instead of arcs of circles has led to the definition of the prism-diopter, a conventional unity for numbering prisms and measuring strabismic deviations. However, a major inconvenience of using prism-diopter unities to express angular measurements is the non-linearity of the scale, which reaches an infinite value for the angle of 90º, then becomes negative, with decreasing magnitudes for increasing angles between 90º and 180º. As a consequence, arithmetical operations and comparisons of angles measured by such unities present errors of very great magnitudes. In order to retain the advantages of defining an angle by straight line dimensions but to diminish the severe inconveniences of this method, a new definition of the prism-diopter is proposed. Here, instead of defining the prism-diopter by the asymmetrical condition, the conception of this new unity is based on a geometrically symmetrical condition; that of the relationship of an isosceles triangle (where the leg is perpendicular to the bisector of the angle and the bisector itself . The condition of symmetry for the definition of the new unity represents a conceptual advance because it reproduces the already well accepted, conventional criteria for quantifying the value of a prism, that of its minimum deviation. Furthermore, it corresponds to the most commonly observed clinical conditions of binocular balance. The absolute differences between the unitary values of the prism-diopter and that of the new unity are negligible (0.0025%, but the scale of values expressed by the new unity is closer to the ideal scale of angular measurements. (With the new unity, the infinite value is only reached for an angle of 180º and the errors due to arithmetical operations are much smaller. Numerical examples showing the advantages of using the new unity of angular measurements instead of the prism-diopter are presented. A

  11. A new unity for angular measurements in strabismus.

    Bicas, Harley E A

    2014-10-01

    The practical advantages of quantifying an angle by a ratio of linear lengths instead of arcs of circles has led to the definition of the prism-diopter, a conventional unity for numbering prisms and measuring strabismic deviations. However, a major inconvenience of using prism-diopter unities to express angular measurements is the non-linearity of the scale, which reaches an infinite value for the angle of 90º, then becomes negative, with decreasing magnitudes for increasing angles between 90º and 180º. As a consequence, arithmetical operations and comparisons of angles measured by such unities present errors of very great magnitudes. In order to retain the advantages of defining an angle by straight line dimensions but to diminish the severe inconveniences of this method, a new definition of the prism-diopter is proposed. Here, instead of defining the prism-diopter by the asymmetrical condition, the conception of this new unity is based on a geometrically symmetrical condition; that of the relationship of an isosceles triangle (where the leg is perpendicular to the bisector of the angle and the bisector itself ). The condition of symmetry for the definition of the new unity represents a conceptual advance because it reproduces the already well accepted, conventional criteria for quantifying the value of a prism, that of its minimum deviation. Furthermore, it corresponds to the most commonly observed clinical conditions of binocular balance. The absolute differences between the unitary values of the prism-diopter and that of the new unity are negligible (0.0025%), but the scale of values expressed by the new unity is closer to the ideal scale of angular measurements. (With the new unity, the infinite value is only reached for an angle of 180º and the errors due to arithmetical operations are much smaller.) Numerical examples showing the advantages of using the new unity of angular measurements instead of the prism-diopter are presented. A mathematical

  12. Time average vibration fringe analysis using Hilbert transformation

    Kumar, Upputuri Paul; Mohan, Nandigana Krishna; Kothiyal, Mahendra Prasad

    2010-01-01

    Quantitative phase information from a single interferogram can be obtained using the Hilbert transform (HT). We have applied the HT method for quantitative evaluation of Bessel fringes obtained in time average TV holography. The method requires only one fringe pattern for the extraction of vibration amplitude and reduces the complexity in quantifying the data experienced in the time average reference bias modulation method, which uses multiple fringe frames. The technique is demonstrated for the measurement of out-of-plane vibration amplitude on a small scale specimen using a time average microscopic TV holography system.

  13. Study of moire fringes using synchrotron X-rays

    Yoshimura, Jun-ichi

    1992-01-01

    It has recently been shown that X-ray moire fringes are not exactly the projection of the intensity distribution of the wave field on the exit surface of the crystal, but do oscillate along the beam path behind the crystal. Such nonprojectiveness of moire fringes is inexplicable by the conventional understanding of moire fringes, and therefore is of interest from a fundamental viewpoint as well as practical one. In this paper the phenomena of the nonprojectiveness are described on the basis of the latest experimental data obtained by synchrotron radiation. (author)

  14. Wavelength-independent fringe spacing in rainbows from falling neutrons

    Berry, M.V.

    1982-01-01

    For particles with speed upsilon and mass m emitted isotropically from a point source and falling under gravity g, the quantal probability density is dominated by a paraboloidal caustic decorated with paraboloidal interference fringes. Near the caustic, the fringes have a spacing independent of upsilon and hence of wavelength, given by ΔR=3.53897x(h 2 /m 2 g)sup(1/3) for the first two (brightest) fringes at the level of the source. For neutrons in the Earth's field, ΔR=0.02617mm. The effect might be difficult to detect. (author)

  15. 11 CFR 114.12 - Incorporation of political committees; payment of fringe benefits.

    2010-01-01

    ... of fringe benefits. 114.12 Section 114.12 Federal Elections FEDERAL ELECTION COMMISSION GENERAL CORPORATE AND LABOR ORGANIZATION ACTIVITY § 114.12 Incorporation of political committees; payment of fringe...'s share of the cost of fringe benefits, such as health and life insurance and retirement, for...

  16. Analytical determination of 5th-order transfer matrices of magnetic quadrupole fringing fields

    Hartmann, B.; Irnich, H.; Wollnik, H.

    1993-01-01

    The fringing-field effects on particle trajectories in magnetic quadrupoles are described to 5th order by fringing-field integrals. It is shown that this method improves the description of fringing-field effects noticeably over the so far known use of third-order fringing-field integrals. (Author)

  17. 29 CFR 4.172 - Meeting requirements for particular fringe benefits-in general.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Meeting requirements for particular fringe benefits-in... particular fringe benefits—in general. Where a fringe benefit determination specifies the amount of the..., as such costs are properly a business expense of the employer. If prevailing fringe benefits for...

  18. Fringe counting method for synthetic phase with frequency-modulated laser diodes

    Onodera, Ribun; Sakuyama, Munechika; Ishii, Yukihiro

    2007-01-01

    Fringe counting method with laser diodes (LDs) for displacement measurement has been constructed. Two LDs are frequency modulated by mutually inverted sawtooth currents on an unbalanced two-beam interferometer. The mutually inverted sawtooth-current modulation of LDs produces interference fringe signals with opposite signs for respective wavelengths. The two fringe signals are fed to an electronic mixer to produce a synthetic fringe signal with a reduced sensitivity to the synthetic wavelength. Synthetic fringe pulses derived from the synthetic fringe signal make a fringe counting system possible for faster movement of the tested mirror

  19. Unity hatch closed in preparation for launch on STS-88

    1998-01-01

    Workers in the Space Station Processing Facility close the access hatch to the Unity connecting module, part of the International Space Station, before its launch aboard Space Shuttle Endeavour on STS-88 in December. Unity will now undergo a series of leak checks before a final purge of clean, dry air inside the module to ready it for initial operations in space. Other testing includes the common berthing mechanism to which other space station elements will dock and the Pad Demonstration Test to verify the compatibility of the module with the Space Shuttle as well as the ability of the astronauts to send and receive commands to Unity from the flight deck of the orbiter. The next time the hatch will be opened it will be by astronauts on orbit. Unity is expected to be ready for installation into the payload canister on Oct. 25, and transported to Launch Pad 39-A on Oct. 27. The Unity will be mated to the Russian-built Zarya control module which should already be in orbit at that time.

  20. Unity connecting module moving to new site in SSPF

    1998-01-01

    In the Space Station Processing Facility (SSPF), Unity (top) is suspended in air as it is moved to a new location (bottom left)in the SSPF. To its left is Leonardo, the Italian-built Multi- Purpose Logistics Module to be launched on STS-100. Above Leonardo, visitors watch through a viewing window, part of the visitors tour at the Center. As the primary payload on mission STS-88, scheduled to launch Dec. 3, 1998, Unity will be mated to the Russian-built Zarya control module which should already be in orbit at that time. In the SSPF, Unity is undergoing testing such as the Pad Demonstration Test to verify the compatibility of the module with the Space Shuttle, as well as the ability of the astronauts to send and receive commands to Unity from the flight deck of the orbiter, and the common berthing mechanism to which other space station elements will dock. Unity is expected to be ready for installation into the payload canister on Oct. 25, and transported to Launch Pad 39-A on Oct. 27.

  1. Frequency guided methods for demodulation of a single fringe pattern.

    Wang, Haixia; Kemao, Qian

    2009-08-17

    Phase demodulation from a single fringe pattern is a challenging task but of interest. A frequency-guided regularized phase tracker and a frequency-guided sequential demodulation method with Levenberg-Marquardt optimization are proposed to demodulate a single fringe pattern. Demodulation path guided by the local frequency from the highest to the lowest is applied in both methods. Since critical points have low local frequency values, they are processed last so that the spurious sign problem caused by these points is avoided. These two methods can be considered as alternatives to the effective fringe follower regularized phase tracker. Demodulation results from one computer-simulated and two experimental fringe patterns using the proposed methods will be demonstrated. (c) 2009 Optical Society of America

  2. Confessions of an iconoclast: at home on the fringe.

    Loevinger, Jane

    2002-04-01

    The career of a psychologist whose work has been on the fringe of psychometrics, of personality theory, and, at a stretch, of psychoanalytic theory and the philosophy of science is described in this article.

  3. SCALING LAW FOR THE IMPACT OF MAGNET FRINGE FIELDS

    WEI, J.; PAPAPHILIPPOU, Y.; TALMAN, R.

    2000-01-01

    A general scaling law can be derived for the relative momentum deflection produced on a particle beam by fringe fields, to leading order. The formalism is applied to two concrete examples, for magnets having dipole and quadrupole symmetry. During recent years, the impact of magnet fringe fields is becoming increasingly important for rings of relatively small circumference but large acceptance. A few years ago, following some heuristic arguments, a scaling law was proposed [1], for the relative deflection of particles passing through a magnet fringe-field. In fact, after appropriate expansion of the magnetic fields in Cartesian coordinates, which generalizes the expansions of Steffen [2], one can show that this scaling law is true for any multipole magnet, at leading order in the transverse coefficients [3]. This paper intends to provide the scaling law to estimate the impact of fringe fields in the special cases of magnets with dipole and quadrupole symmetry

  4. Coherent Integrations, Fringe Modeling, and Bootstrapping With the NPOI

    Jorgensen, Anders M; Mozurkewich, Dave; Schmitt, Henrique; Armstrong, J. T; Gilbreath, G. C; Hindsley, Robert; Pauls, Thomas A; Peterson, Deane M

    2006-01-01

    .... It causes fringes to move on ms time-scales, forcing very short exposures. Because of the semi-random phase shifts, the traditional approach averages exposure power spectra to build signal-to-noise ratio (SNR...

  5. Closed fringe demodulation using phase decomposition by Fourier basis functions.

    Kulkarni, Rishikesh; Rastogi, Pramod

    2016-06-01

    We report a new technique for the demodulation of a closed fringe pattern by representing the phase as a weighted linear combination of a certain number of linearly independent Fourier basis functions in a given row/column at a time. A state space model is developed with the weights of the basis functions as the elements of the state vector. The iterative extended Kalman filter is effectively utilized for the robust estimation of the weights. A coarse estimate of the fringe density based on the fringe frequency map is used to determine the initial row/column to start with and subsequently the optimal number of basis functions. The performance of the proposed method is evaluated with several noisy fringe patterns. Experimental results are also reported to support the practical applicability of the proposed method.

  6. Fringe field effects in small rings of large acceptance

    Martin Berz

    2000-12-01

    Full Text Available Recently there has been renewed interest in the influence of fringe fields on particle dynamics, due to studies that revealed their importance in some cases, as, for example, the proposed Neutrino Factory and muon colliders. In this paper, we present a systematic study of generic fringe field effects. Using as an example a lattice of the proposed Neutrino Factory, we show that fringe fields influence the dynamics of particles at all orders, starting with the linear motion. It is found that the widely used sharp cutoff approximation leads to divergences regardless of the specific fall-off shape of the fields. The results suggest that a careful consideration of fringe field effects in the design stage of small machines for large emittances is always recommended.

  7. Straight, conic and circular fringes in single interferogram

    Rajkumar

    2015-01-01

    Interferometry is an important part of optics courses taught at the undergraduate level in universities throughout the world. It is used to explain to students the wave nature of light and is also used to measure parameters like length, refractive index, thickness of test samples and wavelength of light source, etc. The shape of interference fringes (linear, conic or circular) gives vital information about the interfering wavefronts and is used for firsthand visual inspection in optical shop testing and other applications of scientific and engineering importance. The present work describes a simple laboratory technique to generate fringes with different shapes in a single interferogram. This is achieved by using our diffraction-Lloyd mirror interferometer where two portions of the diffracted field are superimposed to generate the interference fringes. The technique is quite helpful in explaining the role of source orientation on the shape of interference fringes to students. (paper)

  8. Fringe effect of electrical capacitance and resistance tomography sensors

    Sun, Jiangtao; Yang, Wuqiang

    2013-01-01

    Because of the ‘soft-field’ nature, all electrical tomography sensors suffer from electric field distortion, i.e. the fringe effect. In electrical resistance tomography (ERT) sensors, small pin electrodes are commonly used. It is well known that the pin electrodes result in severe electric field distortion or the fringe effect, and the sensing region of such an ERT sensor spreads out of the pin electrode plane to a large volume. This is also true for electrical capacitance tomography (ECT) sensors, even though it is less severe because of larger electrodes and grounded end guards used. However, when the length of electrodes in an ECT sensor without guards is reduced to almost the same dimension as those in an ERT sensor, the fringe effect is equally obvious. To investigate the fringe effect of ERT and ECT sensors with and without guards, simulations were carried out with different length of electrodes and the results are compared with the corresponding 2D simulation. It is concluded that ECT and ERT sensors with longer electrodes have less fringe effect. Because grounded end guards are effective in reducing the fringe effect of ECT sensors, we propose to apply grounded guards in ERT sensors and integrate ECT and ERT sensors together. Simulation results reveal that ERT sensors with grounded guards have less fringe effect. While commonly current excitation is used with ERT sensors, we propose voltage excitation instead to apply the grounded guards. The feasibility of this approach has been verified by experiment. Finally, a common structure for reducing the fringe effect is proposed for ECT and ERT sensors for the first time to simplify the sensor structure and reduce the mutual interference in ECT/ERT dual-modality measurements. (paper)

  9. Two dimensional Fourier transform methods for fringe pattern analysis

    Sciammarella, C. A.; Bhat, G.

    An overview of the use of FFTs for fringe pattern analysis is presented, with emphasis on fringe patterns containing displacement information. The techniques are illustrated via analysis of the displacement and strain distributions in the direction perpendicular to the loading, in a disk under diametral compression. The experimental strain distribution is compared to the theoretical, and the agreement is found to be excellent in regions where the elasticity solution models well the actual problem.

  10. Optical fringe-reflection deflectometry with bundle adjustment

    Xiao, Yong-Liang; Li, Sikun; Zhang, Qican; Zhong, Jianxin; Su, Xianyu; You, Zhisheng

    2018-06-01

    Liquid crystal display (LCD) screens are located outside of a camera's field of view in fringe-reflection deflectometry. Therefore, fringes that are displayed on LCD screens are obtained through specular reflection by a fixed camera. Thus, the pose calibration between the camera and LCD screen is one of the main challenges in fringe-reflection deflectometry. A markerless planar mirror is used to reflect the LCD screen more than three times, and the fringes are mapped into the fixed camera. The geometrical calibration can be accomplished by estimating the pose between the camera and the virtual image of fringes. Considering the relation between their pose, the incidence and reflection rays can be unified in the camera frame, and a forward triangulation intersection can be operated in the camera frame to measure three-dimensional (3D) coordinates of the specular surface. In the final optimization, constraint-bundle adjustment is operated to refine simultaneously the camera intrinsic parameters, including distortion coefficients, estimated geometrical pose between the LCD screen and camera, and 3D coordinates of the specular surface, with the help of the absolute phase collinear constraint. Simulation and experiment results demonstrate that the pose calibration with planar mirror reflection is simple and feasible, and the constraint-bundle adjustment can enhance the 3D coordinate measurement accuracy in fringe-reflection deflectometry.

  11. Intuitive decisions on the fringes of consciousness

    Mark C. Price

    2008-01-01

    Full Text Available Decision making research often dichotomises between more deliberative, cognitive processes and more heuristic, intuitive and emotional processes. We argue that within this two-systems framework (e.g., Kahneman, 2002 there is ambiguity over how to map the System 1/System 2 axis, and the notion of intuitive processing, onto the distinction between conscious and non-conscious processes. However the convergent concepts of experience-based metacognitive judgements (Koriat, 2007 and of fringe consciousness (Mangan, 1993 can clarify intuitive processing as an informative extit{conscious feeling} without conscious access to the antecedents of the feeling. We stress that these intuitive feelings can be used to guide behaviour in a controlled and contextually sensitive manner that would not be permitted by purely non-conscious influences on behaviour. An outline is provided for how to empirically recognise these intuitive feelings. This is illustrated with an example from research on implicit learning where intuitive feelings may play an important role in peoples' decisions and judgements. Finally we suggest that our approach to understanding intuitive feelings softens rather than reinforces the two-systems dichotomy.

  12. Fringe pattern information retrieval using wavelets

    Sciammarella, Cesar A.; Patimo, Caterina; Manicone, Pasquale D.; Lamberti, Luciano

    2005-08-01

    Two-dimensional phase modulation is currently the basic model used in the interpretation of fringe patterns that contain displacement information, moire, holographic interferometry, speckle techniques. Another way to look to these two-dimensional signals is to consider them as frequency modulated signals. This alternative interpretation has practical implications similar to those that exist in radio engineering for handling frequency modulated signals. Utilizing this model it is possible to obtain frequency information by using the energy approach introduced by Ville in 1944. A natural complementary tool of this process is the wavelet methodology. The use of wavelet makes it possible to obtain the local values of the frequency in a one or two dimensional domain without the need of previous phase retrieval and differentiation. Furthermore from the properties of wavelets it is also possible to obtain at the same time the phase of the signal with the advantage of a better noise removal capabilities and the possibility of developing simpler algorithms for phase unwrapping due to the availability of the derivative of the phase.

  13. Problems of provision of unity of measurements in medicine

    Tarbeev, Yu.V.

    1998-01-01

    The problems on providing the measurement unity in medicine on the country scale and within the world community frames are considered. Attention is paid to thermometry, pressure and viscosity measurements, studies in the area of colour vision and laser technique, electrometry, magnetic fields parameters measurements and physico-chemical measurements. The main accent is made on ionizing radiation metrology. The problems on metrological provision of intellectual measurement means for medical purposes and the reference base of Russia as the basis for providing the measurement unity in medicine are also discussed [ru

  14. Unity-Based Diversity: System Approach to Defining Information

    Yixin Zhong

    2011-07-01

    Full Text Available What is information? This is the first question that information science should answer clearly. However, the definitions of information have been so diversified that people are questioning if there is any unity among the diversity, leading to a suspicion on whether it is possible to establish a unified theory of information or not. To answer this question, a system approach to defining information is introduced in this paper. It is proved that the unity of information definitions can be maintained with this approach. As a by-product, an important concept, the information eco-system, was also achieved.

  15. Fringe biasing: A variance reduction technique for optically thick meshes

    Smedley-Stevenson, R. P. [AWE PLC, Aldermaston Reading, Berkshire, RG7 4PR (United Kingdom)

    2013-07-01

    Fringe biasing is a stratified sampling scheme applicable to Monte Carlo thermal radiation transport codes. The thermal emission source in optically thick cells is partitioned into separate contributions from the cell interiors (where the likelihood of the particles escaping the cells is virtually zero) and the 'fringe' regions close to the cell boundaries. Thermal emission in the cell interiors can now be modelled with fewer particles, the remaining particles being concentrated in the fringes so that they are more likely to contribute to the energy exchange between cells. Unlike other techniques for improving the efficiency in optically thick regions (such as random walk and discrete diffusion treatments), fringe biasing has the benefit of simplicity, as the associated changes are restricted to the sourcing routines with the particle tracking routines being unaffected. This paper presents an analysis of the potential for variance reduction achieved from employing the fringe biasing technique. The aim of this analysis is to guide the implementation of this technique in Monte Carlo thermal radiation codes, specifically in order to aid the choice of the fringe width and the proportion of particles allocated to the fringe (which are interrelated) in multi-dimensional simulations, and to confirm that the significant levels of variance reduction achieved in simulations can be understood by studying the behaviour for simple test cases. The variance reduction properties are studied for a single cell in a slab geometry purely absorbing medium, investigating the accuracy of the scalar flux and current tallies on one of the interfaces with the surrounding medium. (authors)

  16. Fringe biasing: A variance reduction technique for optically thick meshes

    Smedley-Stevenson, R. P.

    2013-01-01

    Fringe biasing is a stratified sampling scheme applicable to Monte Carlo thermal radiation transport codes. The thermal emission source in optically thick cells is partitioned into separate contributions from the cell interiors (where the likelihood of the particles escaping the cells is virtually zero) and the 'fringe' regions close to the cell boundaries. Thermal emission in the cell interiors can now be modelled with fewer particles, the remaining particles being concentrated in the fringes so that they are more likely to contribute to the energy exchange between cells. Unlike other techniques for improving the efficiency in optically thick regions (such as random walk and discrete diffusion treatments), fringe biasing has the benefit of simplicity, as the associated changes are restricted to the sourcing routines with the particle tracking routines being unaffected. This paper presents an analysis of the potential for variance reduction achieved from employing the fringe biasing technique. The aim of this analysis is to guide the implementation of this technique in Monte Carlo thermal radiation codes, specifically in order to aid the choice of the fringe width and the proportion of particles allocated to the fringe (which are interrelated) in multi-dimensional simulations, and to confirm that the significant levels of variance reduction achieved in simulations can be understood by studying the behaviour for simple test cases. The variance reduction properties are studied for a single cell in a slab geometry purely absorbing medium, investigating the accuracy of the scalar flux and current tallies on one of the interfaces with the surrounding medium. (authors)

  17. Analysis techniques of lattice fringe images for quantified evaluation of pyrocarbon by chemical vapor infiltration.

    Li, Miaoling; Zhao, Hongxia; Qi, Lehua; Li, Hejun

    2014-10-01

    Some image analysis techniques are developed for simplifying lattice fringe images of deposited pyrocarbon in carbon/carbon composites by chemical vapor infiltration. They are mainly the object counting method for detecting the optimum threshold, the self-adaptive morphological filtering, the node-separation technique for breaking the aggregate fringes, and some post processing algorithms for reconstructing the fringes. The simplified fringes are the foundation for defining and extracting quantitative nanostructure parameters of pyrocarbon. The frequency filter window of a Fourier transform is defined as the circular band that retains only those fringes with interlayer distance between 0.3 and 0.45 nm. Some judge criteria are set to define topological relation between fringes. For example, the aspect ratio and area of fringes are employed to detect aggregate fringes. Fringe coaxality and distance between endpoints are used to judge the disconnected fringes. The optimum values are determined by using the iterative correction techniques. The best cut-off value for the short fringes is chosen only when there is a reasonable match between the mean fringe length and the value measured by X-ray diffraction. The adopted techniques have been verified to be feasible and to have the potential to convert the complex lattice fringe image to a set of distinct fringe structures.

  18. Single-stage unity power factor based electronic ballast

    This paper deals with the design, modeling, analysis and implementation of unity power factor (UPF) based electronic ballast for a fluorescent lamp (FL). The proposed electronic ballast uses a boost AC–DC converter as a power factor corrector (PFC) to improve the power quality at the input ac mains. In this singlestage ...

  19. The role of the education system in promoting unity and ...

    The Rwandan Commission for Human Rights (HRC), NURC, and the Ministry of Education are working in collaboration to draw a more acceptable History syllabus that will promote national unity and reconciliation without distorting the truth. The government has also introduced civic and political education in primary and ...

  20. Hierarchical Task Network Prototyping In Unity3d

    2016-06-01

    provided during run-time, or only have limited high level command input. This puts more of an impetus on the fidelity and realism of the agent...development. Cinematic effects were only added where necessary for debugging. Game Loop Pattern At its core, Unity is a game development engine, and

  1. Appreciating Unity in Diversity: An Interview with Andrew Solomon

    Peters, Dane L.

    2014-01-01

    The theme of the AMS 2014 Annual Conference is "Unity in Diversity," a concept that also describes the work of conference keynote speaker Andrew Solomon. Solomon is a writer and lecturer on psychology and politics; winner of the National Book Award; and an activist for LGBT [lesbian, gay, bisexual, and transgender] rights, mental health,…

  2. Exponential B-splines and the partition of unity property

    Christensen, Ole; Massopust, Peter

    2012-01-01

    We provide an explicit formula for a large class of exponential B-splines. Also, we characterize the cases where the integer-translates of an exponential B-spline form a partition of unity up to a multiplicative constant. As an application of this result we construct explicitly given pairs of dual...

  3. Ghost fringe removal techniques using Lissajous data presentation.

    Erskine, David J; Eggert, J H; Celliers, P M; Hicks, D G

    2016-03-01

    A VISAR (Velocity Interferometer System for Any Reflector) is a Doppler velocity interferometer which is an important optical diagnostic in shockwave experiments at the national laboratories, used to measure equation of state (EOS) of materials under extreme conditions. Unwanted reflection of laser light from target windows can produce an additional component to the VISAR fringe record that can distort and obscure the true velocity signal. Accurately removing this so-called ghost artifact component is essential for achieving high accuracy EOS measurements, especially when the true light signal is only weakly reflected from the shock front. Independent of the choice of algorithm for processing the raw data into a complex fringe signal, we have found it beneficial to plot this signal as a Lissajous and seek the proper center of this path, even under time varying intensity which can shift the perceived center. The ghost contribution is then solved by a simple translation in the complex plane that recenters the Lissajous path. For continuous velocity histories, we find that plotting the fringe magnitude vs nonfringing intensity and optimizing linearity is an invaluable tool for determining accurate ghost offsets. For discontinuous velocity histories, we have developed graphically inspired methods which relate the results of two VISARs having different velocity per fringe proportionalities or assumptions of constant fringe magnitude to find the ghost offset. The technique can also remove window reflection artifacts in generic interferometers, such as in the metrology of surfaces.

  4. Investigation on the properties of the formation and coherence of intense fringe near nonlinear medium slab

    Yonghua Hu

    2018-03-01

    Full Text Available Near medium intense (NMI fringe is a kind of intense fringe which can be formed near Kerr medium in high-power laser beam propagation. The formation properties of NMI fringe and the relations between NMI fringe and related important parameters are systematically investigated. It is found that it is the co-existence of two wirelike phase-typed scatterers in the incident beam spot which is mainly responsible for the high intensity of NMI fringe. From the viewpoint of coherent superposition, the formation process of NMI fringe is analyzed, and the mechanism that NMI fringe is formed by the coherent superposition of the localized bright fringes in the exit field of Kerr medium slab is demonstrated. The fluctuations of NMI fringe properties with beam wavelength, scatterer spacing and object distance are studied, the coherence of NMI fringe are revealed, and the approximate periodicity of the appearance of remarkable NMI fringe for these parameters are obtained. Especially, it is found that the intensity of NMI fringe is very sensitive to scatterer spacing. Besides, the laws about how NMI fringe properties will be changed by the modulation properties of scatterers and the medium thickness are demonstrated. Keywords: High-power laser beam, Nonlinear propagation, Kerr medium, Small-scale scatterer, Nonlinear imaging

  5. Investigation on the properties of the formation and coherence of intense fringe near nonlinear medium slab

    Hu, Yonghua; Qiu, Yaqiong; Li, Yang; Shi, Lin

    2018-03-01

    Near medium intense (NMI) fringe is a kind of intense fringe which can be formed near Kerr medium in high-power laser beam propagation. The formation properties of NMI fringe and the relations between NMI fringe and related important parameters are systematically investigated. It is found that it is the co-existence of two wirelike phase-typed scatterers in the incident beam spot which is mainly responsible for the high intensity of NMI fringe. From the viewpoint of coherent superposition, the formation process of NMI fringe is analyzed, and the mechanism that NMI fringe is formed by the coherent superposition of the localized bright fringes in the exit field of Kerr medium slab is demonstrated. The fluctuations of NMI fringe properties with beam wavelength, scatterer spacing and object distance are studied, the coherence of NMI fringe are revealed, and the approximate periodicity of the appearance of remarkable NMI fringe for these parameters are obtained. Especially, it is found that the intensity of NMI fringe is very sensitive to scatterer spacing. Besides, the laws about how NMI fringe properties will be changed by the modulation properties of scatterers and the medium thickness are demonstrated.

  6. The quest for synergy when developing the urban fringe

    Hansen, Jesper Rohr; Engberg, Lars A.

    How can planning policies related to urban fringe development and disadvantaged neighbourhoods create synergy? This question is approached and answered by various research fields and explored on various urban-planning levels, displaying case-studies related to urban regeneration, post......-industrial and suburban development and urban fringe literature. The present paper adds to these discussions by analysing two case-studies in Denmark in which local government pursue traditional urban-growth strategies in urban-fringe development - a post-industrial harbour and a large suburb, located just outside...... analyses this synergy by first describing the legislative, interventionist and financial context for urban-growth strategies deployed in the cases. On this background, the paper explores synergy potential related to policy as well as private-sector actors (local businesses, social housing organizations...

  7. Phase and fringe order determination in wavelength scanning interferometry.

    Moschetti, Giuseppe; Forbes, Alistair; Leach, Richard K; Jiang, Xiang; O'Connor, Daniel

    2016-04-18

    A method to obtain unambiguous surface height measurements using wavelength scanning interferometry with an improved repeatability, comparable to that obtainable using phase shifting interferometry, is reported. Rather than determining the conventional fringe frequency-derived z height directly, the method uses the frequency to resolve the fringe order ambiguity, and combine this information with the more accurate and repeatable fringe phase derived z height. A theoretical model to evaluate the method's performance in the presence of additive noise is derived and shown to be in good agreement with experiments. The measurement repeatability is improved by a factor of ten over that achieved when using frequency information alone, reaching the sub-nanometre range. Moreover, the z-axis non-linearity (bleed-through or ripple error) is reduced by a factor of ten. These order of magnitude improvements in measurement performance are demonstrated through a number of practical measurement examples.

  8. Calvin’s view on church discipline and unity: a South African perspective

    P.J. Strauss

    2010-07-01

    Full Text Available The reformer John Calvin, born in 1509, considers discipline and unity as two essential aspects of the Christian church. According to him, the bond of church discipline is a way to unite church members in the truth of the Word and the Christian faith based thereupon. If discipline is exercised with exaggerated strictness and without compassion, tolerance and love, it can break the unity. Because church unity is essentially a unity of faith, or a unity in the truth of the Word, discipline can sever adulterated elements that threaten the unity from the church. Discipline, if correctly ap- plied, builds the unity of the church as a unity in religious truths.

  9. Carrier and aberrations removal in interferometric fringe projection profilometry

    Blain, P.; Michel, F.; Renotte, Y.; Habraken, S.

    2012-04-01

    A profilometer which takes advantage of polarization states splitting technique and monochromatic light projection method as a way to overcome ambient lighting for in-situ measurement is under development [1, 2]. Because of the Savart plate which refracts two out of axis beams, the device suffers from aberrations (mostly coma and astigmatism). These aberrations affect the quality of the sinusoidal fringe pattern. In fringe projection profilometry, the unwrapped phase distribution map contains the sum of the object's shape-related phase and carrier-fringe-related phase. In order to extract the 3D shape of the object, the carrier phase has to be removed [3, 4]. An easy way to remove both the fringe carrier and the aberrations of the optical system is to measure the phases of the test object and to measure the phase of a reference plane with the same set up and to subtract both phase maps. This time consuming technique is suitable for laboratory but not for industry. We propose a method to numerically remove both the fringe carrier and the aberrations. A first reference phase of a calibration plane is evaluated knowing the position of the different elements in the set up and the orientation of the fringes. Then a fitting of the phase map by Zernike polynomials is computed [5]. As the triangulation parameters are known during the calibration, the computation of Zernike coefficients has only to be made once. The wavefront error can be adjusted by a scale factor which depends on the position of the test object.

  10. Model-based multi-fringe interferometry using Zernike polynomials

    Gu, Wei; Song, Weihong; Wu, Gaofeng; Quan, Haiyang; Wu, Yongqian; Zhao, Wenchuan

    2018-06-01

    In this paper, a general phase retrieval method is proposed, which is based on one single interferogram with a small amount of fringes (either tilt or power). Zernike polynomials are used to characterize the phase to be measured; the phase distribution is reconstructed by a non-linear least squares method. Experiments show that the proposed method can obtain satisfactory results compared to the standard phase-shifting interferometry technique. Additionally, the retrace errors of proposed method can be neglected because of the few fringes; it does not need any auxiliary phase shifting facilities (low cost) and it is easy to implement without the process of phase unwrapping.

  11. Visibility and Haze

    Haze forms when sunlight encounters particle pollution. It reduces visibility in cities and scenic areas. This web area provides regulatory information and progress towards improving visibility through EPA’s regional haze program.

  12. Visible Human Project

    ... cryosections are associated with anatomical terminology. AnatLine : A prototype system consisting of an anatomical image database and ... further information is available Publications VHJOE: Visible Human Journal of Endoscopy. NLM's Current Bibliographies in Medicine, Visible ...

  13. Visibly Pushdown Automata

    Srba, Jiri

    2006-01-01

    We investigate the possibility of (bi)simulation-like preorder/equivalence checking on the class of visibly pushdown automata and its natural subclasses visibly BPA (Basic Process Algebra) and visibly one-counter automata. We describe generic methods for proving complexity upper and lower bounds...... for a number of studied preorders and equivalences like simulation, completed simulation, ready simulation, 2-nested simulation preorders/equivalences and bisimulation equivalence. Our main results are that all the mentioned equivalences and preorders are EXPTIME-complete on visibly pushdown automata, PSPACE......-complete on visibly one-counter automata and P-complete on visibly BPA. Our PSPACE lower bound for visibly one-counter automata improves also the previously known DP-hardness results for ordinary one-counter automata and one-counter nets. Finally, we study regularity checking problems for visibly pushdown automata...

  14. Effects of the Tax Treatment of Fringe Benefits on Labor Market Segmentation.

    Scott, Frank A.; And Others

    1989-01-01

    Argues that the provision of the same fringe benefits for all workers promotes labor market segmentation by inducing workers to sort themselves across the economy according to their demand for fringe benefits. (JOW)

  15. Analysis of Fringe Field Formed Inside LDA Measurement Volume Using Compact Two Hololens Imaging Systems

    Ghosh, Abhijit; Nirala, A. K.; Yadav, H. L.

    2018-03-01

    We have designed and fabricated four LDA optical setups consisting of aberration compensated four different compact two hololens imaging systems. We have experimentally investigated and realized a hololens recording geometry which is interferogram of converging spherical wavefront with mutually coherent planar wavefront. Proposed real time monitoring and actual fringe field analysis techniques allow complete characterizations of fringes formed at measurement volume and permit to evaluate beam quality, alignment and fringe uniformity with greater precision. After experimentally analyzing the fringes formed at measurement volume by all four imaging systems, it is found that fringes obtained using compact two hololens imaging systems get improved both qualitatively and quantitatively compared to that obtained using conventional imaging system. Results indicate qualitative improvement of non-uniformity in fringe thickness and micro intensity variations perpendicular to the fringes, and quantitative improvement of 39.25% in overall average normalized standard deviations of fringe width formed by compact two hololens imaging systems compare to that of conventional imaging system.

  16. Phase retrieval from reflective fringe patterns of double-sided transparent objects

    Huang, Lei; Asundi, Anand Krishna

    2012-01-01

    ‘Ghosted’ fringe patterns simultaneously reflected from both the upper and lower sides of a transparent target in the fringe reflection technique are captured for transparent surface 3D shape measurement, but the phase retrieval from the captured ‘ghosted’ fringe patterns is still not solved. A novel method is proposed to solve this issue by using two sets of phase-shifted fringe patterns with slightly different frequencies. The nonlinear least-squares method is used to estimate the fringe phase and modulation from both front and rear interfaces. Several simulations are done to show the feasibility of the proposed method. The influence of fringe noise on the algorithm is studied as well, which indicates that the proposed method is able to retrieve the phase from double-sided reflective fringe patterns with fringe noise equivalent to that in practical measurements. The merits and limitations of the method are discussed and recommendations for future studies are made. (paper)

  17. 26 CFR 1.132-6T - De minimis fringe-1985 through 1988 (temporary).

    2010-04-01

    ... holiday gifts of property (not cash) with a low fair market value; occasional theatre or sporting event tickets; and coffee and doughnuts. (2) Benefits not excludable as de minimis fringes. Examples of fringe...

  18. Dispersed-fringe-accumulation-based left-subtract-right method for fine co-phasing of a dispersed fringe sensor.

    Li, Yang; Wang, Shengqian; Rao, Changhui

    2017-05-20

    In this paper, a dispersed-fringe-accumulation (DFA)-based left-subtract-right (LSR) piston estimation method (DFA-LSR), in which the dispersed fringe image is accumulated in the dispersed direction, and then the LSR method is used to estimate the piston error, is proposed for dispersed fringe sensors (DFS) in the fine co-phasing stage. The DFS is usually used to detect the piston errors (optical path difference) between different segmented mirrors or synthetic aperture telescopes. The DFA-LSR makes up for the shortcomings of the main peak position (MPP) method, which suffers from the constant offset in the pixel counts. The analysis and experiment results show that the proposed method can keep relatively better performance even at the condition of poor signal-to-noise ratio, compared with the MPP method in fine co-phasing stage.

  19. The Paradigm of Unity in the Science and Culture

    Grochmal Stanislaw

    2016-12-01

    Full Text Available The paradigm of unity is a response to the contemporary needs of society; it shows a new way of looking at social and cultural processes, in positive and creative aspects, giving the hope to solve many problems of the modern world. It constitutes a methodological basis for building both the theoretical models and application schemas, also reveals the directions of the empirical research (Biela, 1996.

  20. Unity in Diversity: Electronic Patient Record Use in Multidisciplinary Practice

    Oborn, Eivor; Barrett, Michael; Davidson, Elizabeth

    2011-01-01

    In this paper we examine the use of electronic patient records (EPR) by clinical specialists in their development of multidisciplinary care for diagnosis and treatment of breast cancer. We develop a practice theory lens to investigate EPR use across multidisciplinary team practice. Our findings suggest that there are oppositional tendencies towards diversity in EPR use and unity which emerges across multidisciplinary work, and this influences the outcomes of EPR use. The value of this persp...

  1. 29 CFR 5.22 - Effect of the Davis-Bacon fringe benefits provisions.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Effect of the Davis-Bacon fringe benefits provisions. 5.22... Fringe Benefits Provisions of the Davis-Bacon Act § 5.22 Effect of the Davis-Bacon fringe benefits... paragraphs (a) and (b) of § 1.2 of this subtitle. The fringe benefits amendments enlarge the scope of this...

  2. Cosmonaut Gidzenko Near Hatch Between Unity and Destiny

    2001-01-01

    Cosmonaut Yuri P. Gidzenko, Expedition One Soyuz commander, stands near the hatch leading from the Unity node into the newly-attached Destiny laboratory aboard the International Space Station (ISS). The Node 1, or Unity, serves as a cornecting passageway to Space Station modules. The U.S.-built Unity module was launched aboard the Orbiter Endeavour (STS-88 mission) on December 4, 1998, and connected to Zarya, the Russian-built Functional Cargo Block (FGB). The U.S. Laboratory (Destiny) module is the centerpiece of the ISS, where science experiments will be performed in the near-zero gravity in space. The Destiny Module was launched aboard the Space Shuttle Orbiter Atlantis (STS-98 mission) on February 7, 2001. The aluminum module is 8.5 meters (28 feet) long and 4.3 meters (14 feet) in diameter. The laboratory consists of three cylindrical sections and two endcones with hatches that will be mated to other station components. A 50.9-centimeter- (20-inch-) diameter window is located on one side of the center module segment. This pressurized module is designed to accommodate pressurized payloads. It has a capacity of 24 rack locations, and payload racks will occupy 13 locations especially designed to support experiments.

  3. Strong time-consistency in the cartel-versus-fringe model

    Groot, F.; Withagen, C.A.A.M.; Zeeuw, de A.J.

    2003-01-01

    Due to developments on the oil market in the 1970s, the theory of exhaustible resources was extended with the cartel-versus-fringe model to characterize markets with one big coherent cartel and a large number of small suppliers called the fringe. Because cartel and fringe are leader and follower,

  4. 29 CFR 4.174 - Meeting requirements for holiday fringe benefits.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Meeting requirements for holiday fringe benefits. 4.174... Compensation Standards Compliance with Compensation Standards § 4.174 Meeting requirements for holiday fringe benefits. (a) Determining eligibility for holiday benefits—in general. (1) Most fringe benefit...

  5. 14 CFR 93.345 - VFR outbound procedures for fringe airports.

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false VFR outbound procedures for fringe airports... Metropolitan Area Special Flight Rules Area § 93.345 VFR outbound procedures for fringe airports. (a) A pilot may depart from a fringe airport as defined in § 93.335 without filing a flight plan or communicating...

  6. 29 CFR 4.162 - Fringe benefits under contracts exceeding $2,500.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Fringe benefits under contracts exceeding $2,500. 4.162... Compensation Standards § 4.162 Fringe benefits under contracts exceeding $2,500. (a) Pursuant to the statutory... contain a provision specifying the fringe benefits to be furnished the various classes of service...

  7. 26 CFR 1.162-25T - Deductions with respect to noncash fringe benefits (temporary).

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Deductions with respect to noncash fringe... Individuals and Corporations § 1.162-25T Deductions with respect to noncash fringe benefits (temporary). (a) Employer. If an employer includes the value of a noncash fringe benefit in an employee's gross income, the...

  8. 29 CFR 4.165 - Wage payments and fringe benefits-in general.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Wage payments and fringe benefits-in general. 4.165 Section... Compensation Standards Compliance with Compensation Standards § 4.165 Wage payments and fringe benefits—in... fringe benefits (see § 4.177). (2) The Act makes no distinction, with respect to its compensation...

  9. 29 CFR 4.177 - Discharging fringe benefit obligations by equivalent means.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Discharging fringe benefit obligations by equivalent means... CONTRACTS Compensation Standards Compliance with Compensation Standards § 4.177 Discharging fringe benefit obligations by equivalent means. (a) In general. (1) Section 2(a)(2) of the Act, which provides for fringe...

  10. 29 CFR 4.50 - Types of wage and fringe benefit determinations.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Types of wage and fringe benefit determinations. 4.50... Determination Procedures § 4.50 Types of wage and fringe benefit determinations. The Administrator specifies the minimum monetary wages and fringe benefits to be paid as required under the Act in two types of...

  11. On price taking behavior in a nonrenewable resource cartel-fringe game

    Withagen, C.A.A.M.; Benchekroun, H.

    2012-01-01

    We consider a nonrenewable resource game with one cartel and a set of fringe members. We show that (i) the outcomes of the closed-loop and the open-loop nonrenewable resource game with the fringe members as price takers (the cartel-fringe game à la Salant, 1976) coincide and (ii) when the number of

  12. 26 CFR 1.162-25 - Deductions with respect to noncash fringe benefits.

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Deductions with respect to noncash fringe... Corporations § 1.162-25 Deductions with respect to noncash fringe benefits. (a) [Reserved] (b) Employee. If an employer provides the use of a vehicle (as defined in § 1.61-21(e)(2)) to an employee as a noncash fringe...

  13. 44 CFR 208.40 - Reimbursement of fringe benefit costs during Activation.

    2010-10-01

    ... reimbursement sought from DHS. (c) DHS will not reimburse the Sponsoring Agency for fringe benefit costs for... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Reimbursement of fringe... RESCUE RESPONSE SYSTEM Response Cooperative Agreements § 208.40 Reimbursement of fringe benefit costs...

  14. 26 CFR 1.61-2T - Taxation of fringe benefits-1985 through 1988 (temporary).

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Taxation of fringe benefits-1985 through 1988 (temporary). 1.61-2T Section 1.61-2T Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY..., and Taxable Income § 1.61-2T Taxation of fringe benefits—1985 through 1988 (temporary). (a) Fringe...

  15. Analysis of the Localization of Michelson Interferometer Fringes Using Fourier Optics and Temporal Coherence

    Narayanamurthy, C. S.

    2009-01-01

    Fringes formed in a Michelson interferometer never localize in any plane, in the detector plane and in the localization plane. Instead, the fringes are assumed to localize at infinity. Except for some explanation in "Principles of Optics" by Born and Wolf (1964 (New York: Macmillan)), the fringe localization phenomena of Michelson's interferometer…

  16. 26 CFR 1.132-6 - De minimis fringes.

    2010-04-01

    ...) so small as to make accounting for it unreasonable or administratively impracticable. (b) Frequency... of hours worked (e.g., $1.00 per hour for each hour over eight hours) be considered a de minimis... as a working condition fringe if the employee would not have had such special security design but for...

  17. Analysis of Professional Fringe Benefits, 1978-79. OMNI Report.

    Vater, James J.; Riddle, Richard A.

    This report contains data collected from 275 Pennsylvania school districts for the 1978-79 school year. The data reflect policies and practices affecting fringe benefits for professional employees. The report is divided into three major sections. The first section presents comparative data for 30 variables on a statewide, size, and wealth basis.…

  18. Analysis of Professional Fringe Benefits 1977-78. OMNI Report.

    Caldwell, William E.; Vater, James J.

    This report contains data collected from 275 Pennsylvania school districts for the 1977-78 school year. The data reflect policies and practices affecting fringe benefits for professional employees. The report is divided into three major sections. The first section presents comparative data for 30 variables on a statewide, size, and wealth basis.…

  19. 26 CFR 1.132-5 - Working condition fringes.

    2010-04-01

    ... exist unless the employee's employer establishes to the satisfaction of the Commissioner that an overall... example, threats are made on the life of an employee), the bona fide business-oriented security concern is... condition fringe. A “working condition fringe” is any property or service provided to an employee of an...

  20. Livelihood trends in Response to Climate Change in Forest Fringe ...

    One of the forest fringe communities in Ghana where the rural livelihoods of the people have been compromised due to deforestation and climate change is the Offin basin. The removal of forests impacts on local climate, water availability, and livelihoods due to influence of forests on precipitation and water balance. Fluxes ...

  1. Optical coherent control in semiconductors: Fringe contrast and inhomogeneous broadening

    Østergaard, John Erland; Vadim, Lyssenko; Hvam, Jørn Märcher

    2001-01-01

    in the interplay between the homogeneous and inhomogeneous broadenings are measured. Based on these experiments, a coherent control model describing the optical fringe contrast using different detection schemes, such as photoluminescence or four-wave mixing, is established. Significant spectral modulation...

  2. Fringe Fitting for Coherent Integrations with the NPOI

    Jorgensen, A. M; Mozurkewich, D; Armstrong, T; Hindsley, R; Pauls, T; Gilbreath, G. Charmaine; Restaino, S

    2004-01-01

    ...), which is based on fitting a model fringe pattern to the NPOI data frames. The procedure is quite computationally intensive, but gives a better estimation of the phase than the conventional method of locating the peak of the group delay power...

  3. Measurement of gradient index profiles by Babinet fringe analysis.

    Pandya, T P; Saxena, A K

    1979-03-01

    A theory for determining one-dimensional ray deflections with the help of distorted Babinet fringes has been developed. An approach for investigating two-dimensional ray deflections has been presented. Applications of the techniques for the study of gradient index glass have been described.

  4. Manic fringe is not required for embryonic development, and fringe family members do not exhibit redundant functions in the axial skeleton, limb, or hindbrain

    Moran, Jennifer L.; Shifley, Emily T.; Levorse, John M.; Mani, Shyamala; Ostmann, Kristin; Perez-Balaguer, Ariadna; Walker, Dawn M.; Vogt, Thomas F.; Cole, Susan E.

    2009-01-01

    Tight regulation of Notch pathway signaling is important in many aspects of embryonic development. Notch signaling can be modulated by expression of fringe genes, encoding glycosyltransferases that modify EGF repeats in the Notch receptor. Although Lunatic fringe (Lfng) has been shown to play important roles in vertebrate segmentation, comparatively little is known regarding the developmental functions of the other vertebrate fringe genes, Radical fringe (Rfng) and Manic fringe (Mfng). Here we report that Mfng expression is not required for embryonic development. Further, we find that despite significant overlap in expression patterns, we detect no obvious synergistic defects in mice in the absence of two, or all three, fringe genes during development of the axial skeleton, limbs, hindbrain and cranial nerves. PMID:19479951

  5. General filtering method for electronic speckle pattern interferometry fringe images with various densities based on variational image decomposition.

    Li, Biyuan; Tang, Chen; Gao, Guannan; Chen, Mingming; Tang, Shuwei; Lei, Zhenkun

    2017-06-01

    Filtering off speckle noise from a fringe image is one of the key tasks in electronic speckle pattern interferometry (ESPI). In general, ESPI fringe images can be divided into three categories: low-density fringe images, high-density fringe images, and variable-density fringe images. In this paper, we first present a general filtering method based on variational image decomposition that can filter speckle noise for ESPI fringe images with various densities. In our method, a variable-density ESPI fringe image is decomposed into low-density fringes, high-density fringes, and noise. A low-density fringe image is decomposed into low-density fringes and noise. A high-density fringe image is decomposed into high-density fringes and noise. We give some suitable function spaces to describe low-density fringes, high-density fringes, and noise, respectively. Then we construct several models and numerical algorithms for ESPI fringe images with various densities. And we investigate the performance of these models via our extensive experiments. Finally, we compare our proposed models with the windowed Fourier transform method and coherence enhancing diffusion partial differential equation filter. These two methods may be the most effective filtering methods at present. Furthermore, we use the proposed method to filter a collection of the experimentally obtained ESPI fringe images with poor quality. The experimental results demonstrate the performance of our proposed method.

  6. Percolative Theory of Organic Magnetoresistance and Fringe-Field Magnetoresistance

    Flatté, Michael E.

    2013-03-01

    A recently-introduced percolation theory for spin transport and magnetoresistance in organic semiconductors describes the effects of spin dynamics on hopping transport by considering changes in the effective density of hopping sites, a key quantity determining the properties of percolative transport. Increases in the spin-flip rate open up ``spin-blocked'' pathways to become viable conduction channels and hence, as the spin-flip rate changes with magnetic field, produce magnetoresistance. Features of this percolative magnetoresistance can be found analytically in several regimes, and agree with measurements of the shape and saturation of measured magnetoresistance curves. We find that the threshold hopping distance is analogous to the branching parameter of a phenomenological two-site model, and that the distinction between slow and fast hopping is contingent on the threshold hopping distance. Regimes of slow and fast hopping magnetoresistance are uniquely characterized by their line shapes. Studies of magnetoresistance in known systems with controllable positional disorder would provide an additional stringent test of this theory. Extensions to this theory also describe fringe-field magnetoresistance, which is the influence of fringe magnetic fields from a nearby unsaturated magnetic electrode on the conductance of an organic film. This theory agrees with several key features of the experimental fringe-field magnetoresistance, including the applied fields where the magnetoresistance reaches extrema, the applied field range of large magnetoresistance effects from the fringe fields, and the sign of the effect. All work done in collaboration with N. J. Harmon, and fringe-field magnetoresistance work in collaboration also with F. Macià, F. Wang, M. Wohlgenannt and A. D. Kent. This work was supported by an ARO MURI.

  7. Demonstration of a tunable two-frequency projected fringe pattern with acousto-optic deflectors

    Dupont, S.; Kastelik, J. C.

    2008-01-01

    We report on a fringe projector for three-dimensional shape measurement. The developed instrument is able to project a two-frequency fringe pattern, each frequency is independently controlled by electronics. Moreover, each phase of the two fringe patterns is also independently adjusted. The projection system is based on the use of a pair of custom large bandwidth (40 MHz) and high efficiency (60%) TeO 2 deflectors. The developed instrument offers the combined advantages of a static two-frequency fringe projector and of a tunable single frequency fringe projector

  8. Separation of complex fringe patterns using two-dimensional continuous wavelet transform.

    Pokorski, Krzysztof; Patorski, Krzysztof

    2012-12-10

    A method for processing fringe patterns containing additively superimposed multiple fringe sets is presented. It enables to analyze different fringe families present in a single image separately. The proposed method is based on a two-dimensional continuous wavelet transform. A robust ridge extraction algorithm for a single fringe set extraction is presented. The method is fully automatic and requires no user interference. Spectral separation of fringe families is not required. Simulations are presented to verify performance and advantage of the proposed method over the Fourier transform based technique. Method validity has been confirmed using experimental images.

  9. IBN ‘ARABI AND THE TRANSCENDENTAL UNITY OF RELIGIONS

    Media Zainul Bahri

    2012-07-01

    Full Text Available This essay describes Ibn ‘Arabi’s comprehensive views, captured in his important Futuhat and Fusus, on the concept of wahdat al-adyan, the discrepancy of beliefs, and the Shari’ah as well as its juncture and its unity. Elaborated explanation in this paper is expected to result in a true understanding of this crucial issue, particularly the concept of religious pluralism in the discourse of Islamic studies. Ibn Arabi’ extensively  discusses religion in the sense of the “ideal” versus “historical” or “esoteric” versus “the exoteric”. Ibn ‘Arabi concludes that the absolute unity of religions may only occur within spiritual, ideal, or transcendental realm (or “esoteric”, which is beyond the formal form of religions. Hence, the transcendental unity of religions cannot be found in the formal form of religions nor in the shari’ah.[Artikel ini mengulas pandangan Ibn ‘Arabi’ mengenai wahdat al-adyan seperti dijelaskan dalam dua bukunya; Futuhat dan Fusus, dan perbedaan dan kesamaan antara iman dan shariah. Diharapkan diskusi artikel ini berkontribusi dalam kajian pluralisme, utamanya dalam disiplin studi Islam. Dalam diskusinya, Ibn Arabi’  menjelaskan perbedaan ‘ideal’ dan ‘historikal’ atau antara ‘esoterik’ dan ‘eksoterik’. Ibn ‘Arabi berpendapat bahwa kemanunggalan agama-agama dapat dicapai melalui spiritualitas, ideal, atau dimensi transcendental (esoterik yang ada di luar tampilan formal agama-agama. Dengan kata lain, kemanunggalan tersebut tidak akan ditemukan pada shari’ah.

  10. 20 CFR 641.565 - What policies govern the provision of wages and fringe benefits to participants?

    2010-04-01

    ... and fringe benefits to participants? 641.565 Section 641.565 Employees' Benefits EMPLOYMENT AND... PROGRAM Services to Participants § 641.565 What policies govern the provision of wages and fringe benefits...) Fringe benefits—(1) Required fringe benefits. Except as provided in paragraphs (b)(3) and (b)(4) of this...

  11. The Unity-Of-Value as a Theory of Interpretation

    Allan Gomes Moreira

    2016-12-01

    Full Text Available This paper aims to address the unity of value as a general theory of interpretation. By overcoming the supposed division between law and morality, considering the interpretive activity the central element of a normative theory of all human endeavor, Dworkin highlights the limitations of legal positivism designed by Hart to provide adequate solutions to the "hard cases" and broadens the spectrum to find a "correct answer" to specific cases in a normative theory linked to political morality, expressed by the interpretive activity, whose meaning will be the value assigned by the interpreter to a particular event or object.

  12. Unity is strength: staff college and the British officer corps.

    King, Anthony

    2009-03-01

    Utilizing Bourdieu's concept of the habitus, Keith Macdonald has recently examined the elite social origins of the British officer corps. His analysis is valid as far at it goes but it ignores the professional practices of British officers. This article examines Britain's Joint Services Command and Staff College to assess the unification of the three services around common forms of military practice. It argues that while the new staff college has been effective in disseminating new forms of professional expertise among British officers, various practices have been institutionalized which actively undermine the unity of the officer corps.

  13. Two-rowed Hecke algebra representations at roots of unity

    Welsh, T.A.

    1996-01-01

    The explicit construction of irreducible representations of the Hecke algebra H n (q) of type A n-1 was studied for the non-generic case where q is a root of unity. The approach is via the Specht modules of H n (q) which are irreducible in the generic case and possess a natural basis indexed by Young tableaux. The general framework in which the non-generic H n (q)-modules are to be constructed is set up and, in particular, the full set of modules corresponding to two-part partitions is described. Many examples are given. 12 refs

  14. Advanced split-illumination electron holography without Fresnel fringes

    Tanigaki, Toshiaki, E-mail: tanigaki-toshiaki@riken.jp [Center for Emergent Matter Science (CEMS), RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Aizawa, Shinji; Park, Hyun Soon [Center for Emergent Matter Science (CEMS), RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Matsuda, Tsuyoshi [Japan Science and Technology Agency, Kawaguchi, Saitama 332-0012 (Japan); Harada, Ken [Central Research Laboratory, Hitachi, Ltd., Hatoyama, Saitama 350-0395 (Japan); Shindo, Daisuke [Center for Emergent Matter Science (CEMS), RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira 2-1-1, Sendai 980-8577 (Japan)

    2014-02-01

    Advanced split-illumination electron holography was developed by employing two biprisms in the illuminating system to split an electron wave into two coherent waves and two biprisms in the imaging system to overlap them. A focused image of an upper condenser-biprism filament was formed on the sample plane, and all other filaments were placed in its shadow. This developed system makes it possible to obtain precise reconstructed object waves without modulations due to Fresnel fringes, in addition to holograms of distant objects from reference waves. - Highlights: • Advanced split-illumination electron holography without Fresnel fringes is developed. • Two biprisms are installed in illuminating system of microscope. • High-precision holographic observations of an area locating far from the sample edge become possible.

  15. Advanced split-illumination electron holography without Fresnel fringes

    Tanigaki, Toshiaki; Aizawa, Shinji; Park, Hyun Soon; Matsuda, Tsuyoshi; Harada, Ken; Shindo, Daisuke

    2014-01-01

    Advanced split-illumination electron holography was developed by employing two biprisms in the illuminating system to split an electron wave into two coherent waves and two biprisms in the imaging system to overlap them. A focused image of an upper condenser-biprism filament was formed on the sample plane, and all other filaments were placed in its shadow. This developed system makes it possible to obtain precise reconstructed object waves without modulations due to Fresnel fringes, in addition to holograms of distant objects from reference waves. - Highlights: • Advanced split-illumination electron holography without Fresnel fringes is developed. • Two biprisms are installed in illuminating system of microscope. • High-precision holographic observations of an area locating far from the sample edge become possible

  16. Digital reconstruction of Young's fringes using Fresnel transformation

    Kulenovic, Rudi; Song, Yaozu; Renninger, P.; Groll, Manfred

    1997-11-01

    This paper deals with the digital numerical reconstruction of Young's fringes from laser speckle photography by means of the Fresnel-transformation. The physical model of the optical reconstruction of a specklegram is a near-field Fresnel-diffraction phenomenon which can be mathematically described by the Fresnel-transformation. Therefore, the interference phenomena can be directly calculated by a microcomputer.If additional a CCD-camera is used for specklegram recording the measurement procedure and evaluation process can be completely carried out in a digital way. Compared with conventional laser speckle photography no holographic plates, no wet development process and no optical specklegram reconstruction are needed. These advantages reveal a wide future in scientific and engineering applications. The basic principle of the numerical reconstruction is described, the effects of experimental parameters of Young's fringes are analyzed and representative results are presented.

  17. Visibility and Citation Impact

    Ebrahim, Nader Ale; Salehi, Hadi; Embi, Mohamed Amin; Tanha, Farid Habibi; Gholizadeh, Hossein; Motahar, Seyed Mohammad

    2014-01-01

    The number of publications is the first criteria for assessing a researcher output. However, the main measurement for author productivity is the number of citations, and citations are typically related to the paper's visibility. In this paper, the relationship between article visibility and the number of citations is investigated. A case study of…

  18. Viewer Makes Radioactivity "Visible"

    Yin, L. I.

    1983-01-01

    Battery operated viewer demonstrates feasibility of generating threedimensional visible light simulations of objects that emit X-ray or gamma rays. Ray paths are traced for two pinhold positions to show location of reconstructed image. Images formed by pinholes are converted to intensified visible-light images. Applications range from radioactivity contamination surveys to monitoring radioisotope absorption in tumors.

  19. THE ANTIQUE FOUNDATIONS FOR THE UNITY OF EDUCATION

    Alexander E Krikunov

    2017-12-01

    Full Text Available The author of the paper considers the unity of education as a specific way of existence, blurring the distinction between ontological and anthropological interpretations of education. This approach is supposed to adequately identify the philosophic sense of the category of education without linking it exclusively to the philosophic consideration of educational practice. The author also points out the connection between the ideas of the world unity and of a human being’s education as a process of gradual approaching one’s true and complete image in the history of European philosophy. Even though the contemporary notion of education is most elaborately presented by classical German philosophers, the author aims to show the prospects of addressing the antique philosophic tradition proposing the first conceptualization of education connected with a special ontological position. The author calls attention to the gradual development of views on the systemic nature of being, linking it to the initial didactic guideline of Greek philosophers. The example of Aristotle’s ethics proves the integrity of externally separate ways of making up of a person. The author comes to a conclusion about the necessity of taking the connection of educational concepts and a characteristic tendency to create the philosophic theory of the world, the elements of which are united in an integrated system, into account. In the author’s opinion, it will allow to define the real philosophic and pedagogical sense of the revision of the classical philosophic tradition, undertaken by the contemporary philosophy.

  20. Biodegradation at Dynamic Plume Fringes: Mixing Versus Reaction Control

    Cirpka, O. A.; Eckert, D.; Griebler, C.; Haberer, C.; Kürzinger, P.; Bauer, R.; Mellage, A.

    2014-12-01

    Biodegradation of continuously emitted plumes is known to be most pronounced at the plume fringe, where mixing of contaminated water and ambient groundwater, containing dissolved electron acceptors, stimulates microbial activity. Under steady-state conditions, physical mixing of contaminant and electron acceptor by transverse dispersion was shown to be the major bottleneck for biodegradation, with plume lengths scaling inversely with the bulk transverse dispersivity in quasi two-dimensional settings. Under these conditions, the presence of suitable microbes is essential but the biokinetic parameters do not play an important role. When the location of the plume shifts (caused, e.g., by a fluctuating groundwater table), however, the bacteria are no more situated at the plume fringe and biomass growth, decay, activation and deactivation determine the time lag until the fringe-controlled steady state is approached again. During this time lag, degradation is incomplete. The objective of the presented study was to analyze to which extent flow and transport dynamics diminish effectiveness of fringe-controlled biodegradation and which microbial processes and related biokinetic parameters determine the system response in overall degradation to hydraulic fluctuations. We performed experiments in quasi-two-dimensional flow through microcosms on aerobic toluene degradation by Pseudomonas putida F1. Plume dynamics were simulated by vertical alteration of the toluene plume position and experimental results were analyzed by reactive-transport modeling. We found that, even after disappearance of the toluene plume for two weeks, the majority of microorganisms stayed attached to the sediment and regained their full biodegradation potential within two days after reappearance of the toluene plume. Our results underline that besides microbial growth and maintenance (often subsumed as "biomass decay") microbial dormancy (that is, change into a metabolically inactive state) and

  1. Broadband and wide angle near-unity absorption in graphene-insulator-metal thin film stacks

    Zhang, H. J.; Zheng, G. G.; Chen, Y. Y.; Xu, L. H.

    2018-05-01

    Broadband unity absorption in graphene-insulator-metal (GIM) structures is demonstrated in the visible (VIS) and near-infrared (NIR) spectra. The spectral characteristics possess broadband absorption peaks, by simply choosing a stack of GIM, while no nanofabrication steps and patterning are required, and thus can be easily fabricated to cover a large area. The electromagnetic (EM) waves can be entirely trapped and the absorption can be greatly enhanced are verified with the finite-difference time-domain (FDTD) and rigorous coupled wave analysis (RCWA) methods. The position and the number of the absorption peak can be totally controlled by adjusting the thickness of the insulator layer. The proposed absorber maintains high absorption (above 90%) for both transverse electric (TE) and transverse magnetic (TM) polarizations, and for angles of incidence up to 80°. This work opens up a promising approach to realize perfect absorption (PA) with ultra-thin film, which could implicate many potential applications in optical detection and optoelectronic devices.

  2. Iterated unscented Kalman filter for phase unwrapping of interferometric fringes.

    Xie, Xianming

    2016-08-22

    A fresh phase unwrapping algorithm based on iterated unscented Kalman filter is proposed to estimate unambiguous unwrapped phase of interferometric fringes. This method is the result of combining an iterated unscented Kalman filter with a robust phase gradient estimator based on amended matrix pencil model, and an efficient quality-guided strategy based on heap sort. The iterated unscented Kalman filter that is one of the most robust methods under the Bayesian theorem frame in non-linear signal processing so far, is applied to perform simultaneously noise suppression and phase unwrapping of interferometric fringes for the first time, which can simplify the complexity and the difficulty of pre-filtering procedure followed by phase unwrapping procedure, and even can remove the pre-filtering procedure. The robust phase gradient estimator is used to efficiently and accurately obtain phase gradient information from interferometric fringes, which is needed for the iterated unscented Kalman filtering phase unwrapping model. The efficient quality-guided strategy is able to ensure that the proposed method fast unwraps wrapped pixels along the path from the high-quality area to the low-quality area of wrapped phase images, which can greatly improve the efficiency of phase unwrapping. Results obtained from synthetic data and real data show that the proposed method can obtain better solutions with an acceptable time consumption, with respect to some of the most used algorithms.

  3. Analyzing Visibility Configurations.

    Dachsbacher, C

    2011-04-01

    Many algorithms, such as level of detail rendering and occlusion culling methods, make decisions based on the degree of visibility of an object, but do not analyze the distribution, or structure, of the visible and occluded regions across surfaces. We present an efficient method to classify different visibility configurations and show how this can be used on top of existing methods based on visibility determination. We adapt co-occurrence matrices for visibility analysis and generalize them to operate on clusters of triangular surfaces instead of pixels. We employ machine learning techniques to reliably classify the thus extracted feature vectors. Our method allows perceptually motivated level of detail methods for real-time rendering applications by detecting configurations with expected visual masking. We exemplify the versatility of our method with an analysis of area light visibility configurations in ray tracing and an area-to-area visibility analysis suitable for hierarchical radiosity refinement. Initial results demonstrate the robustness, simplicity, and performance of our method in synthetic scenes, as well as real applications.

  4. Accuracy and high-speed technique for autoprocessing of Young's fringes

    Chen, Wenyi; Tan, Yushan

    1991-12-01

    In this paper, an accurate and high-speed method for auto-processing of Young's fringes is proposed. A group of 1-D sampled intensity values along three or more different directions are taken from Young's fringes, and the fringe spacings of each direction are obtained by 1-D FFT respectively. Two directions that have smaller fringe spacing are selected from all directions. The accurate fringe spacings along these two directions are obtained by using orthogonal coherent phase detection technique (OCPD). The actual spacing and angle of Young's fringes, therefore, can be calculated. In this paper, the principle of OCPD is introduced in detail. The accuracy of the method is evaluated theoretically and experimentally.

  5. Fringe-projection profilometry based on two-dimensional empirical mode decomposition.

    Zheng, Suzhen; Cao, Yiping

    2013-11-01

    In 3D shape measurement, because deformed fringes often contain low-frequency information degraded with random noise and background intensity information, a new fringe-projection profilometry is proposed based on 2D empirical mode decomposition (2D-EMD). The fringe pattern is first decomposed into numbers of intrinsic mode functions by 2D-EMD. Because the method has partial noise reduction, the background components can be removed to obtain the fundamental components needed to perform Hilbert transformation to retrieve the phase information. The 2D-EMD can effectively extract the modulation phase of a single direction fringe and an inclined fringe pattern because it is a full 2D analysis method and considers the relationship between adjacent lines of a fringe patterns. In addition, as the method does not add noise repeatedly, as does ensemble EMD, the data processing time is shortened. Computer simulations and experiments prove the feasibility of this method.

  6. Phase retrieval from a single fringe pattern by using empirical wavelet transform

    Guo, Xiaopeng; Zhao, Hong; Wang, Xin

    2015-01-01

    Phase retrieval from a single fringe pattern is one of the key tasks in optical metrology. In this paper, we present a new method for phase retrieval from a single fringe pattern based on empirical wavelet transform. In the proposed method, a fringe pattern can be effectively divided into three components: nonuniform background, fringes and random noise, which are described in different sub-pass. So the phase distribution information can be robustly extracted from fringes representing a fundamental frequency component. In simulation and a practical projection fringes test, the performance of the present method is successfully verified by comparing with the conventional wavelet transform method in terms of both image quality and phase estimation errors. (paper)

  7. Adaptive fringe-pattern projection for image saturation avoidance in 3D surface-shape measurement.

    Li, Dong; Kofman, Jonathan

    2014-04-21

    In fringe-projection 3D surface-shape measurement, image saturation results in incorrect intensities in captured images of fringe patterns, leading to phase and measurement errors. An adaptive fringe-pattern projection (AFPP) method was developed to adapt the maximum input gray level in projected fringe patterns to the local reflectivity of an object surface being measured. The AFPP method demonstrated improved 3D measurement accuracy by avoiding image saturation in highly-reflective surface regions while maintaining high intensity modulation across the entire surface. The AFPP method can avoid image saturation and handle varying surface reflectivity, using only two prior rounds of fringe-pattern projection and image capture to generate the adapted fringe patterns.

  8. Comparative analysis on some spatial-domain filters for fringe pattern denoising.

    Wang, Haixia; Kemao, Qian

    2011-04-20

    Fringe patterns produced by various optical interferometric techniques encode information such as shape, deformation, and refractive index. Noise affects further processing of the fringe patterns. Denoising is often needed before fringe pattern demodulation. Filtering along the fringe orientation is an effective option. Such filters include coherence enhancing diffusion, spin filtering with curve windows, second-order oriented partial-differential equations, and the regularized quadratic cost function for oriented fringe pattern filtering. These filters are analyzed to establish the relationships among them. Theoretical analysis shows that the four filters are largely equivalent to each other. Quantitative results are given on simulated fringe patterns to validate the theoretical analysis and to compare the performance of these filters. © 2011 Optical Society of America

  9. An algorithm to remove fringe jumps and its application to microwave reflectometry

    Ejiri, A.; Kawahata, K.; Shinohara, K.

    1997-01-01

    In some plasma discharges, the phase measured by microwave reflectometry has many fringe (2π radians) jumps. A new algorithm to detect and remove fringe jumps has been developed, and applied to the data in the JIPP TII-U tokamak. Using this algorithm, quantitative properties of fringe jumps, and their effects on the analysis of phase fluctuations are investigated. It was found that the occurrence of fringe jumps obeys a Poisson process, and the time scale of jumps is distributed over a wide range. Fringe jumps affect mainly the low-frequency components of phase fluctuations. Comparison of the phase corrected by the algorithm and the phase calculated from the time smoothed signals indicates that time smoothing (or frequency filtering) is an effective way to obtain information concerning the macroscopic density profile. Fringe jump and phase runaway can be phenomenologically explained by the distribution of the complex amplitude of the reflected wave. (author)

  10. Supersymmetric models with tan β close to unity

    Ananthanarayan, B.; Babu, K.S.; Shafi, Q.

    1994-01-01

    Within the framework of supersymmetric grand unification, estimates of the b quark mass based on the asymptotic relation m b similar eqm τ single out the region with tan β close to unity, particularly if m t (m t ) < or ∼170 GeV. We explore the radiative breaking of the electroweak symmetry and the associated sparticle and higgs spectroscopy in models with 1 < tan β< or ∼1.6. The lightest scalar higgs is expected to have a mass below 100 GeV, while the remaining four higgs masses exceed 300 GeV. The lower bounds on some of the sparticle masses are within the range of LEP 200. ((orig.))

  11. Usability and user driven innovation - unity or clash?

    Fronczek-Munter, Aneta

    2011-01-01

    Aim: To present different understandings of the concepts ‗usability‘ and ‗user driven innovation‘ and discuss if and how the built environment can benefit from these concepts and the unity of them. Approach and methodology: The paper is based on literature reviews of scientific journals and other...... influential publications within the academic fields of Facilities Management, Architecture and Engineering, Participatory Design and Software design. Outline: The paper will discuss different understandings of the concept ‗usability‘ and its relation to ‗user driven innovation‘, which depends on the academic...... field and area of professional application. The concept of usability has its roots in evaluations of consumer products and user interfaces of computer software. During the last 5-10 years there has been a new development of research in usability of buildings and workplaces. Recently researchers have...

  12. A NOVEL THREE PHASE UNITY POWER FACTOR CONVERTER

    Bekir Sami SAZAK

    1998-03-01

    Full Text Available The proposed unity power factor converter system which is able to operate from a 150V three-phase supply whilst delivering the required 200V DC voltage has been built and tested. This circuit functions as a high power factor low harmonic rectifier based on the concept that the peak capacitor voltages are proportional to the line input currents. Hence the low frequency components of the capacitor voltages are also approximately proportional to the line input currents. The system can be designed to achieve nearly sinusoidal supply input currents, when operated with discontinuous resonant capacitor voltages Output power control is achieved by variations of the IGBTs switching frequency. The converter is therefore able to compensate for any changes in the load resistance. The proposed topology offers advantages, including: a relatively simple power, control and protection circuits, high power capability, and high converter efficiencies.

  13. Visible spectroscopy on ASDEX

    Hofmann, J.V.

    1991-12-01

    In this report visible spectroscopy and impurity investigations on ASDEX are reviewed and several sets of visible spectra are presented. As a basis for identification of metallic impurity lines during plasma discharges spectra from a stainless steel - Cu arc have been recorded. In a next step a spectrum overview of ASDEX discharges is shown which reveals the dominating role of lines from light impurities like carbon and oxygen throughout the UV and visible range (2000 A ≤ λ ≤ 8000 A). Metallic impurity lines of neutrals or single ionized atoms are observed near localized surfaces. The dramatic effect of impurity reduction by boronization of the vessel walls is demonstrated in a few examples. In extension to some ivesti-gations already published, further diagnostic applications of visible spectroscopy are presented. Finally, the hardware and software system used on ASDEX are described in detail. (orig.)

  14. Comparative analysis of gradient-field-based orientation estimation methods and regularized singular-value decomposition for fringe pattern processing.

    Sun, Qi; Fu, Shujun

    2017-09-20

    Fringe orientation is an important feature of fringe patterns and has a wide range of applications such as guiding fringe pattern filtering, phase unwrapping, and abstraction. Estimating fringe orientation is a basic task for subsequent processing of fringe patterns. However, various noise, singular and obscure points, and orientation data degeneration lead to inaccurate calculations of fringe orientation. Thus, to deepen the understanding of orientation estimation and to better guide orientation estimation in fringe pattern processing, some advanced gradient-field-based orientation estimation methods are compared and analyzed. At the same time, following the ideas of smoothing regularization and computing of bigger gradient fields, a regularized singular-value decomposition (RSVD) technique is proposed for fringe orientation estimation. To compare the performance of these gradient-field-based methods, quantitative results and visual effect maps of orientation estimation are given on simulated and real fringe patterns that demonstrate that the RSVD produces the best estimation results at a cost of relatively less time.

  15. Proton moire fringes for diagnosing electromagnetic fields in opaque materials and plasmas

    Mackinnon, A.J.; Patel, P.K.; Price, D.W.; Hicks, D.; Romagnani, L.; Borghesi, M.

    2003-01-01

    High contrast proton moire fringes have been obtained in a laser-produced proton beam. Moire fringes with modulation of 20%-30% were observed in protons with energies in the range of 4-7 MeV. Monte Carlo simulations with simple test fields showed that shifts in the moire fringes can be used to give quantitative information on the strength of transient electromagnetic fields inside plasmas and materials that are opaque to conventional probing methods

  16. Interpretation of interfacial structures in X-ray multilayers by TEM Fresnel fringe effects

    Nguyen, Tai D.; O'Keefe, Michael A.; Kilaas, Roar; Gronsky, Ronald; Kortright, Jeffrey B.

    1991-01-01

    Assessment of interfacial structures from high-resolution TEM images of cross-sectional specimens is difficult due to Fresnel fringe effects producing different apparent structures in the images. The effects of these fringes have been commonly over-looked in efforts of making quantitative interpretation of interfacial profiles. In this report, we present the observations of the Fresnel fringes in nanometer period Mo/Si, W/C, and WC/C multilayers in through-focus-series TEM images. Calculation...

  17. Taking apart the enhanced backscattering cone: Interference fringes from reciprocal paths in multiple light scattering

    Bret, Boris P. J.; Ferreira, Flavio P.; Nunes-Pereira, Eduardo J.; Belsley, Michael

    2010-01-01

    We report the decomposition of the enhanced backscattering cone into its constitutive interference fringes. These fringes are due to the constructive interference between reciprocal paths of any multiply scattered wave after ensemble averaging. An optical setup combining a two-point continuous-wave illumination and matching detection allows the observation of the fringes and, therefore, the quantitative characterization of the Green's function for light propagation between the two points in a multiple-scattering media.

  18. In-phase and anti-phase interference fringes in Laue case

    Negishi, Riichirou; Fukamachi, Tomoe; Yoshizawa, Masami; Hirano, Kenji; Hirano, Keiichi; Kawamura, Takaaki

    2009-01-01

    By using X-rays from synchrotron radiation, we measured the rocking curves due to only the imaginary part of the atomic scattering factor in Laue case. The interference fringes are observed which are totally different from the Pendelloesung fringe. The fringes of the diffracted and transmitted rocking curves are in-phase with each other. We studied the origin of the in-phase fringes by using the complex dispersion surface and the electric field in the crystal, and also the relation with a coupled pendulum. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  19. Carrier introduction to moire pattern for automatic fringe-order distinguishing

    Fang, J.; Laermann, K.H.

    1992-01-01

    This paper presents an automatic procedure of pseudo-colour encoding of moire fringe orders. A carrier consisting of parallel fringes is introduced before the specimen deforms. The carrier pattern is captured by a camera and then stored in computer as a standard image. The space of the carrier fringes is distored by the strains on the specimen as it is loaded. On a certain condition, the orders of the frequency-modulated carrier still vary monotonically so that they can be easyly distinguished. Both the standard fringe-carrier and the frequency-modulated fringe pattern are transformed into two digital images, of which every fringe is encoded by one of the pseudo-colour codes corresponding to the monotonical fringe orders. At each pixel, the difference between the colour sequences of two images is calculated to obtain the fringe order of pure deformation. The moire pattern of the in-plane displacement is restored as a pseudo-colour image by whose colour-change the variation of the fringe orders is displayed. (orig.)

  20. Boussinesq Modeling of Wave Propagation and Runup over Fringing Coral Reefs, Model Evaluation Report

    Demirbilek, Zeki; Nwogu, Okey G

    2007-01-01

    ..., for waves propagating over fringing reefs. The model evaluation had two goals: (a) investigate differences between laboratory and field characteristics of wave transformation processes over reefs, and (b...

  1. Imaging beyond the fringe: an update on the LINC-NIRVANA Fizeau interferometer for the LBT

    Herbst, T. M.; Ragazzoni, R.; Eckart, A.; Weigelt, G.

    2010-07-01

    We present an update on the construction and integration of LINC-NIRVANA, a Fizeau-mode imaging interferometer for the Large Binocular Telescope (LBT). The LBT is a unique platform for interferometry, since its two, co-mounted 8.4 meter primary mirrors present an orientation-independent entrance pupil. This allows Fizeau-mode beam combination, providing 23-meter spatial resolution and 12-meter effective collecting area for panoramic imagery LINC-NIRVANA will sit at one of the shared, bent focal stations, receiving light from both mirrors of the LBT. The instrument uses visible wavelength radiation for wavefront control, and the near-infrared bands for science and fringe tracking. LINC-NIRVANA employs a number of innovative technologies, including multi-conjugated adaptive optics, state-of-the-art materials, low vibration mechanical coolers, active and passive control, and sophisticated software for data analysis. The instrument is in its final construction and integration phase. This paper reports on overall progress, including insights gained on large instrument assembly, software integration, science planning, and vibration control. A number of additional contributions to this conference focus on individual subsystems and integration-related issues.

  2. Characterization of black carbon in an urban-rural fringe area of Beijing.

    Ji, Dongsheng; Li, Liang; Pang, Bo; Xue, Peng; Wang, Lili; Wu, Yunfei; Zhang, Hongliang; Wang, Yuesi

    2017-04-01

    Measuring black carbon (BC) is critical to understand the impact of combustion aerosols on air quality and climate change. In this study, BC was measured in 2014 at a unique community formed with rapid economic development and urbanization in an urban-rural fringe area of Beijing. Hourly BC concentrations were 0.1-33.5 μg/m 3 with the annual average of 4.4 ± 3.7 μg/m 3 . BC concentrations had clear diurnal, weekly, and seasonal variations, and were closely related with atmospheric visibility. The absorption coefficient of aerosols increased while its contribution to extinction coefficient decreased with the enhancement of PM 2.5 concentration. The high mass absorption efficiency (MAE) of EC was attributed to a combination of coal combustion, vehicular emission and rapidly coating by water-soluble ions and organic carbon (OC). BC concentrations followed a typical lognormal pattern, with over 88% samples in 0.1-10.0 μg/m 3 . Low BC levels were mostly bounded up with winds from north and northwest. Coal combustion and biomass burning were closely associated with severe haze pollution events. Firework discharge had significant UV absorption contribution. During the Asia-Pacific Economic Cooperation (APEC) forum in November 2014, air quality obviously improved due to various control strategies. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. In-phase and anti-phase interference fringes in rocking curves of resonant X-ray dynamical diffraction

    Negishi, Riichirou; Fukamachi, Tomoe; Yoshizawa, Masami; Hirano, Kenji; Hirano, Keiichi; Kawamura, Takaaki

    2008-01-01

    We have observed the interference fringes that are in phase with each other in the diffracted and transmitted rocking curves of GaAs 200 reflection near the K-absorption edge of As. The fringes are in contrast with the well-known Pendelloesung fringes that are anti-phase with each other in the diffracted and transmitted waves. The origin of the in-phase interference fringe is analyzed to be due to the diffraction only by the imaginary part of the atomic scattering factor. It is also shown that the interference fringes become typical Pendelloesung fringes when the diffraction is caused only by the real part. (author)

  4. Single shot fringe pattern phase demodulation using Hilbert-Huang transform aided by the principal component analysis.

    Trusiak, Maciej; Służewski, Łukasz; Patorski, Krzysztof

    2016-02-22

    Hybrid single shot algorithm for accurate phase demodulation of complex fringe patterns is proposed. It employs empirical mode decomposition based adaptive fringe pattern enhancement (i.e., denoising, background removal and amplitude normalization) and subsequent boosted phase demodulation using 2D Hilbert spiral transform aided by the Principal Component Analysis method for novel, correct and accurate local fringe direction map calculation. Robustness to fringe pattern significant noise, uneven background and amplitude modulation as well as local fringe period and shape variations is corroborated by numerical simulations and experiments. Proposed automatic, adaptive, fast and comprehensive fringe analysis solution compares favorably with other previously reported techniques.

  5. The influence of unity-in-variety on aesthetic appreciation of car interiors

    Post, R.A.G.; Blijlevens, J.; Hekkert, P.P.M.

    2013-01-01

    Product designers can use a wide range of design principles to influence the appearance of new product designs. One of these principles, ‘unity-in-variety’, states that product designs combining a maximum of unity or order with as much variety as possible are the most aesthetically pleasing. Even

  6. Characterisations of Partition of Unities Generated by Entire Functions in Cd

    Christensen, Ole; Kim, Hong Oh; Kim, Rae Young

    2017-01-01

    Collections of functions forming a partition of unity play an important role in analysis. In this paper we characterise for any N∈N the entire functions P for which the partition of unity condition ∑n∈ZdP(x+n)χ[0,N]d(x+n)=1 holds for all x∈Rd. The general characterisation leads to various easy wa...

  7. On entire functions restricted to intervals, partition of unities, and dual Gabor frames

    Christensen, Ole; Kim, Hong Oh; Kim, Rae Young

    2014-01-01

    Partition of unities appears in many places in analysis. Typically it is generated by compactly supported functions with a certain regularity. In this paper we consider partition of unities obtained as integer-translates of entire functions restricted to finite intervals. We characterize the enti...

  8. Transport of volatile organic compounds across the capillary fringe

    McCarthy, Kathleen A.; Johnson, Richard L.

    1993-01-01

    Physical experiments were conducted to investigate the transport of a dissolved volatile organic compound (trichloroethylene, TCE) from shallow groundwater to the unsaturated zone under a variety of conditions including changes in the soil moisture profile and water table position. Experimental data indicated that at moderate groundwater velocities (0.1 m/d), vertical mechanical dispersion was negligible and molecular diffusion was the dominant vertical transport mechanism. Under these conditions, TCE concentrations decreased nearly 3 orders of magnitude across the capillary fringe and soil gas concentrations remained low relative to those of underlying groundwater. Data collected during a water table drop showed a short-term increase in concentrations throughout most of the unsaturated zone, but these concentrations quickly declined and approached initial values after the water table was returned to its original level. In the deep part of the unsaturated zone, the water table drop resulted in a long-term decrease in concentrations, illustrating the effects of hysteresis in the soil moisture profile. A two-dimensional random walk advection-diffusion model was developed to simulate the experimental conditions, and numerical simulations agreed well with experimental data. A simpler, one-dimensional finite-difference diffusion-dispersion model was also developed. One-dimensional simulations based on molecular diffusion also agreed well with experimental data. Simulations which incorporated mechanical dispersion tended to overestimate flux across the capillary fringe. Good agreement between the one- and two-dimensional models suggested that a simple, one-dimensional approximation of vertical transport across the capillary fringe can be useful when conditions are appropriate.

  9. Multiple rotation assessment through isothetic fringes in speckle photography

    Angel, Luciano; Tebaldi, Myrian; Bolognini, Nestor

    2007-01-01

    The use of different pupils for storing each speckled image in speckle photography is employed to determine multiple in-plane rotations. The method consists of recording a four-exposure specklegram where the rotations are done between exposures. This specklegram is then optically processed in a whole field approach rendering isothetic fringes, which give detailed information about the multiple rotations. It is experimentally demonstrated that the proposed arrangement permits the depiction of six isothetics in order to measure either six different angles or three nonparallel components for two local general in-plane displacements

  10. Modeling the static fringe field of superconducting magnets.

    Jeglic, P; Lebar, A; Apih, T; Dolinsek, J

    2001-05-01

    The resonance frequency-space and the frequency gradient-space relations are evaluated analytically for the static fringe magnetic field of superconducting magnets used in the NMR diffusion measurements. The model takes into account the actual design of the high-homogeneity magnet coil system that consists of the main coil and the cryoshim coils and enables a precise calibration of the on-axis magnetic field gradient and the resonance frequency inside and outside of the superconducting coil. Copyright 2001 Academic Press.

  11. Fringe pattern analysis for optical metrology theory, algorithms, and applications

    Servin, Manuel; Padilla, Moises

    2014-01-01

    The main objective of this book is to present the basic theoretical principles and practical applications for the classical interferometric techniques and the most advanced methods in the field of modern fringe pattern analysis applied to optical metrology. A major novelty of this work is the presentation of a unified theoretical framework based on the Fourier description of phase shifting interferometry using the Frequency Transfer Function (FTF) along with the theory of Stochastic Process for the straightforward analysis and synthesis of phase shifting algorithms with desired properties such

  12. Universal Jurisdiction between Unity and Fragmentation of International Criminal Law

    Pasculli Maria Antonella

    2011-04-01

    Full Text Available This paper represents the outcome of research fellowship Marie Curie at the Universiteit Leiden -Campud Den Haag Grotius, Centre for International Legal Studies (prof. C. Stahn and prof. Larissa van den Herik, supervisors on the topic "The Fragmentation and the Diversification of International Criminal Law in a Global Society”.In my paper I will examine the question of whether Universal Jurisdiction (UJ leads to unity or fragmentation within International Criminal Law (ICL. Given that there is already quite a lot of literature on UJ, it is important to focus the research on the issue of fragmentation and/or unity rather than to deal with the issue of UJ more generally. I will focus on this topic in sections 1 and 2, explaining some cursory remarks to these issues in my analysis on fragmentation. In the introduction, I will briefly introduce UJ as a controversial form of jurisdiction, but still necessary given that territorial jurisdiction does not always function well in the case of international crime. I will demonstrate that many state parties to the International Criminal Court (ICC Statute have vested or reconfirmed UJ for the core crimes when implementing the ICC Statute. The leading question of my research is whether this practice has led or has the potential to lead to unity or rather to fragmentation within ICL. In the research I will approach this question from different perspectives.In section 1 I will examine how State parties have may actually enacted universal jurisdiction for the core crimes, with a view to determining whether there is indeed some unity on this front or whether the practice on this matter is actually rather diverse (or fragmented. Subsequently, I will analyse which conditions States have formulated for the exercise of UJ, and whether this practice is consistent (unity or again rather diverse (fragmentation. It might also be interesting to see whether States have different conditions for UJ over core crimes than

  13. Unity connecting module prepared for move to new site in SSPF

    1998-01-01

    Workers in the Space Station Processing Facility (SSPF) attach a frame to lift the Unity connecting module, part of the International Space Station, for its move to another location in the SSPF. As the primary payload on mission STS-88, scheduled to launch Dec. 3, 1998, Unity will be mated to the Russian-built Zarya control module which should already be in orbit at that time. In the SSPF, Unity is undergoing testing such as the Pad Demonstration Test to verify the compatibility of the module with the Space Shuttle, as well as the ability of the astronauts to send and receive commands to Unity from the flight deck of the orbiter, and the common berthing mechanism to which other space station elements will dock. Unity is expected to be ready for installation into the Shuttle's payload canister on Oct. 25, and transported to Launch Pad 39-A on Oct. 27.

  14. Unity connecting module lifted from workstand before move to new site in SSPF

    1998-01-01

    Workers in the Space Station Processing Facility (SSPF) oversee the lifting of the Unity connecting module, part of the International Space Station, for its move to another location in the SSPF. As the primary payload on mission STS-88, scheduled to launch Dec. 3, 1998, Unity will be mated to the Russian-built Zarya control module which should already be in orbit at that time. In the SSPF, Unity is undergoing testing such as the Pad Demonstration Test to verify the compatibility of the module with the Space Shuttle, as well as the ability of the astronauts to send and receive commands to Unity from the flight deck of the orbiter, and the common berthing mechanism to which other space station elements will dock. Unity is expected to be ready for installation into the Shuttle's payload canister on Oct. 25, and transported to Launch Pad 39-A on Oct. 27.

  15. Unity connecting module before being moved to new site in SSPF

    1998-01-01

    In the Space Station Processing Facility (SSPF), the Unity connecting module, part of the International Space Station, sits on a workstand before its move to a new location in the SSPF. As the primary payload on mission STS-88, scheduled to launch Dec. 3, 1998, Unity will be mated to the Russian-built Zarya control module which should already be in orbit at that time. In the SSPF, Unity is undergoing testing such as the Pad Demonstration Test to verify the compatibility of the module with the Space Shuttle, as well as the ability of the astronauts to send and receive commands to Unity from the flight deck of the orbiter, and the common berthing mechanism to which other space station elements will dock. Unity is expected to be ready for installation into the Shuttle's payload canister on Oct. 25, and transported to Launch Pad 39-A on Oct. 27.

  16. Predicting visibility of aircraft.

    Andrew Watson

    Full Text Available Visual detection of aircraft by human observers is an important element of aviation safety. To assess and ensure safety, it would be useful to be able to be able to predict the visibility, to a human observer, of an aircraft of specified size, shape, distance, and coloration. Examples include assuring safe separation among aircraft and between aircraft and unmanned vehicles, design of airport control towers, and efforts to enhance or suppress the visibility of military and rescue vehicles. We have recently developed a simple metric of pattern visibility, the Spatial Standard Observer (SSO. In this report we examine whether the SSO can predict visibility of simulated aircraft images. We constructed a set of aircraft images from three-dimensional computer graphic models, and measured the luminance contrast threshold for each image from three human observers. The data were well predicted by the SSO. Finally, we show how to use the SSO to predict visibility range for aircraft of arbitrary size, shape, distance, and coloration.

  17. Measuring visibility using smartphones

    Friesen, Jan; Bialon, Raphael; Claßen, Christoph; Graffi, Kalman

    2017-04-01

    Spatial information on fog density is an important parameter for ecohydrological studies in cloud forests. The Dhofar cloud forest in Southern Oman exhibits a close interaction between the fog, trees, and rainfall. During the three month monsoon season the trees capture substantial amounts of horizontal precipitation from fog which increases net precipitation below the tree canopy. As fog density measurements are scarce, a smartphone app was designed to measure visibility. Different smartphone units use a variety of different parts. It is therefore important to assess the developed visibility measurement across a suite of different smartphones. In this study we tested five smartphones/ tablets (Google/ LG Nexus 5X, Huawei P8 lite, Huawei Y3, HTC Nexus 9, and Samsung Galaxy S4 mini) against digital camera (Sony DLSR-A900) and visual visibility observations. Visibility was assessed from photos using image entropy, from the number of visible targets, and from WiFi signal strength using RSSI. Results show clear relationships between object distance and fog density, yet a considerable spread across the different smartphone/ tablet units is evident.

  18. Breeding unity: Battlestar Galactica’s biracial reproductive futurity

    Kustritz, A.

    2012-01-01

    While Battlestar Galactica reinvigorated the science fiction genre by representing contemporary political problems in a complex, often radical fashion, the series also makes visible a new articulation of eugenic thinking. Postmodern eugenics repurposes turn-of-the 20th century ideas of racial

  19. UVISS preliminary visibility analysis

    Betto, Maurizio

    1998-01-01

    The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part of the w......The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...... of the work is also to setup the kernel of a software tool for the visibility analysis thatshould be easily expandable to consider more complex strucures for future activities.This analysis is part of the UVISS assessment study and it is meant to provide elementsfor the definition and the selection...

  20. Corneal topometry by fringe projection: limits and possibilities

    Windecker, Robert; Tiziani, Hans J.; Thiel, H.; Jean, Benedikt J.

    1996-01-01

    A fast and accurate measurement of corneal topography is an important task especially since laser induced corneal reshaping has been used for the correction of ametropia. The classical measuring system uses Placido rings for the measurement and calculation of the topography or local curvatures. Another approach is the projection of a known fringe map to be imaged onto the surface under a certain angle of incidence. We present a set-up using telecentric illumination and detection units. With a special grating we get a synthetic wavelength with a nearly sinusoidal profile. In combination with a very fast data acquisition the topography can be evaluated using as special selfnormalizing phase evaluation algorithm. It calculates local Fourier coefficients and corrects errors caused by imperfect illumination or inhomogeneous scattering by fringe normalization. The topography can be determined over 700 by 256 pixel. The set-up is suitable to measure optically rough silicon replica of the human cornea as well as the cornea in vivo over a field of 8 mm and more. The resolution is mainly limited by noise and is better than two micrometers. We discuss the principle benefits and the drawbacks compared with standard Placido technique.

  1. FSD-HSO Optimization Algorithm for Closed Fringes Interferogram Demodulation

    Ulises H. Rodriguez-Marmolejo

    2016-01-01

    Full Text Available Due to the physical nature of the interference phenomenon, extracting the phase of an interferogram is a known sinusoidal modulation problem. In order to solve this problem, a new hybrid mathematical optimization model for phase extraction is established. The combination of frequency guide sequential demodulation and harmony search optimization algorithms is used for demodulating closed fringes patterns in order to find the phase of interferogram applications. The proposed algorithm is tested in four sets of different synthetic interferograms, finding a range of average relative error in phase reconstructions of 0.14–0.39 rad. For reference, experimental results are compared with the genetic algorithm optimization technique, obtaining a reduction in the error up to 0.1448 rad. Finally, the proposed algorithm is compared with a very known demodulation algorithm, using a real interferogram, obtaining a relative error of 1.561 rad. Results are shown in patterns with complex fringes distribution.

  2. Holographic images reconstructed from GMR-based fringe pattern

    Kikuchi Hiroshi

    2013-01-01

    Full Text Available We have developed a magneto-optical spatial light modulator (MOSLM using giant magneto-resistance (GMR structures for realizing a holographic three-dimensional (3D display. For practical applications, reconstructed image of hologram consisting of GMR structures should be investigated in order to study the feasibility of the MOSLM. In this study, we fabricated a hologram with GMR based fringe-pattern and demonstrated a reconstructed image. A fringe-pattern convolving a crossshaped image was calculated by a conventional binary computer generated hologram (CGH technique. The CGH-pattern has 2,048 × 2,048 with 5 μm pixel pitch. The GMR stack consists of a Tb-Fe-Co/CoFe pinned layer, a Ag spacer, a Gd-Fe free layer for light modulation, and a Ru capping layer, was deposited by dc-magnetron sputtering. The GMR hologram was formed using photo-lithography and Krion milling processes, followed by the deposition of a Tb-Fe-Co reference layer with large coercivity and the same Kerr-rotation angle compared to the free layer, and a lift-off process. The reconstructed image of the ON-state was clearly observed and successfully distinguished from the OFF-state by switching the magnetization direction of the free-layer with an external magnetic field. These results indicate the possibility of realizing a holographic 3D display by the MOSLM using the GMR structures.

  3. Directly Measuring the Degree of Quantum Coherence using Interference Fringes

    Wang, Yi-Tao; Tang, Jian-Shun; Wei, Zhi-Yuan; Yu, Shang; Ke, Zhi-Jin; Xu, Xiao-Ye; Li, Chuan-Feng; Guo, Guang-Can

    2017-01-01

    Quantum coherence is the most distinguished feature of quantum mechanics. It lies at the heart of the quantum-information technologies as the fundamental resource and is also related to other quantum resources, including entanglement. It plays a critical role in various fields, even in biology. Nevertheless, the rigorous and systematic resource-theoretic framework of coherence has just been developed recently, and several coherence measures are proposed. Experimentally, the usual method to measure coherence is to perform state tomography and use mathematical expressions. Here, we alternatively develop a method to measure coherence directly using its most essential behavior—the interference fringes. The ancilla states are mixed into the target state with various ratios, and the minimal ratio that makes the interference fringes of the "mixed state" vanish is taken as the quantity of coherence. We also use the witness observable to witness coherence, and the optimal witness constitutes another direct method to measure coherence. For comparison, we perform tomography and calculate l1 norm of coherence, which coincides with the results of the other two methods in our situation. Our methods are explicit and robust, providing a nice alternative to the tomographic technique.

  4. Making Invisible Forces Visible

    Ratner, Helene Gad

    2013-01-01

    This paper investigates managerial tactics of visualisation when a need to know and manage employees' values and attitudes is expressed. Using the Danish public school as a case study, we explore how school managers use teachers' emotions to render visible presumably invisible information about...... their 'true' attitudes and values. The paper draws on theories of affect as well as actor-network theory to analyse three incidents where managers turn their interpretations of teachers' emotions into such information. These incidents suggest that the efforts to render employees' attitudes and values visible...

  5. High-frequency background modulation fringe patterns based on a fringe-wavelength geometry-constraint model for 3D surface-shape measurement.

    Liu, Xinran; Kofman, Jonathan

    2017-07-10

    A new fringe projection method for surface-shape measurement was developed using four high-frequency phase-shifted background modulation fringe patterns. The pattern frequency is determined using a new fringe-wavelength geometry-constraint model that allows only two corresponding-point candidates in the measurement volume. The correct corresponding point is selected with high reliability using a binary pattern computed from intensity background encoded in the fringe patterns. Equations of geometry-constraint parameters permit parameter calculation prior to measurement, thus reducing measurement computational cost. Experiments demonstrated the ability of the method to perform 3D shape measurement for a surface with geometric discontinuity, and for spatially isolated objects.

  6. Community structure and abundance of benthic infaunal invertebrates in Maine fringing marsh ecosystems

    Richard A. MacKenzie; Michele Dionne; Jeremy Miller; Michael Haas; Pamela A. Morgan

    2015-01-01

    Fringing marshes are abundant ecosystems that dominate the New England coastline. Despite their abundance, very little baseline data is available from them and few studies have documented the ecosystems services that they provide. This information is important for conservation efforts as well as for an increased understanding of how fringing marshes function compared...

  7. The first F-ring modified ciguatoxin analogue showing significant toxicity.

    Ishihara, Yuuki; Lee, Nayoung; Oshiro, Naomasa; Matsuoka, Shigeru; Yamashita, Shuji; Inoue, Masayuki; Hirama, Masahiro

    2010-05-07

    Ciguatoxins, the principal causative toxins of ciguatera seafood poisoning, are potent neurotoxic polycyclic ethers. We report herein the total synthesis of a 10-membered F-ring analogue of 51-hydroxyCTX3C, which constitutes the first example of an F-ring modified ciguatoxin that exhibits potent cytotoxicity as well as mouse acute toxicity.

  8. 49 CFR 1242.50 - Fringe benefits (account 12-27-00).

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Fringe benefits (account 12-27-00). 1242.50 Section 1242.50 Transportation Other Regulations Relating to Transportation (Continued) SURFACE...-Equipment § 1242.50 Fringe benefits (account 12-27-00). Separate common expenses in proportion to the...

  9. Optimal defocus selection based on normed Fourier transform for digital fringe pattern profilometry.

    Kamagara, Abel; Wang, Xiangzhao; Li, Sikun

    2017-10-01

    Owing to gamma-effect robustness and high-speed imaging capabilities, projector defocusing of binary-coded fringe patterns is by far the most widely used and effective technique in generating sinusoidal fringe patterns for three-dimensional optical topography measurement with digital fringe projection techniques. However, this technique is not trouble-free. It is borne with uncertainty and challenges mainly because it remains somewhat difficult to quantify and ascertain the level of defocus required for desired fidelity in sinuousness of the projected fringe pattern. Too much or too little defocusing will affect the sinuosity accuracy of fringe patterns and consequently jeopardize the quality of the measurement results. In this paper, by combining intrinsic phase spectral sensitivities and normed Fourier transform, a method to quantify the amount of defocus and subsequently select the optimal degree of sinuosity for generating digital sinusoidal fringe patterns with projector defocusing for fringe pattern optical three-dimensional profilometry is proposed. Numerical simulations plus experiments give evidence of the feasibility and validity of the proposed method in enabling an improved digital binary defocusing technique for optical phase-shift profilometry using the digital fringe projection technique.

  10. 49 CFR 1242.63 - Fringe benefits (account 12-51-00).

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Fringe benefits (account 12-51-00). 1242.63 Section 1242.63 Transportation Other Regulations Relating to Transportation (Continued) SURFACE...-Transportation § 1242.63 Fringe benefits (account 12-51-00). Separate common expenses in proportion to the...

  11. Modeling of the fringe shift in multiple beam interference for glass ...

    A quadratic model is suggested to describe the fringe shift occurred due to the phase variations of uncladded glass fiber introduced between the two plates of the liquid wedge interferometer. The fringe shift of the phase object is represented in the harmonic term which appears in the denominator of the Airy distribution ...

  12. 49 CFR 1242.85 - Fringe benefits (account 12-63-00).

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Fringe benefits (account 12-63-00). 1242.85 Section 1242.85 Transportation Other Regulations Relating to Transportation (Continued) SURFACE....85 Fringe benefits (account 12-63-00). Separate the common expenses in proportion to the total common...

  13. Inpainting for Fringe Projection Profilometry Based on Geometrically Guided Iterative Regularization.

    Budianto; Lun, Daniel P K

    2015-12-01

    Conventional fringe projection profilometry methods often have difficulty in reconstructing the 3D model of objects when the fringe images have the so-called highlight regions due to strong illumination from nearby light sources. Within a highlight region, the fringe pattern is often overwhelmed by the strong reflected light. Thus, the 3D information of the object, which is originally embedded in the fringe pattern, can no longer be retrieved. In this paper, a novel inpainting algorithm is proposed to restore the fringe images in the presence of highlights. The proposed method first detects the highlight regions based on a Gaussian mixture model. Then, a geometric sketch of the missing fringes is made and used as the initial guess of an iterative regularization procedure for regenerating the missing fringes. The simulation and experimental results show that the proposed algorithm can accurately reconstruct the 3D model of objects even when their fringe images have large highlight regions. It significantly outperforms the traditional approaches in both quantitative and qualitative evaluations.

  14. 49 CFR 1242.75 - Fringe benefits (account 12-53-00).

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Fringe benefits (account 12-53-00). 1242.75 Section 1242.75 Transportation Other Regulations Relating to Transportation (Continued) SURFACE...-Transportation § 1242.75 Fringe benefits (account 12-53-00). Separate common expenses in proportion to the...

  15. 49 CFR 1242.80 - Fringe benefits (account 12-55-00).

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Fringe benefits (account 12-55-00). 1242.80 Section 1242.80 Transportation Other Regulations Relating to Transportation (Continued) SURFACE...-Transportation § 1242.80 Fringe benefits (account 12-55-00). Separate common expenses in proportion to the...

  16. 49 CFR 1242.70 - Fringe benefits (account 12-52-00).

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Fringe benefits (account 12-52-00). 1242.70 Section 1242.70 Transportation Other Regulations Relating to Transportation (Continued) SURFACE...-Transportation § 1242.70 Fringe benefits (account 12-52-00). Separate common expenses in proportion to the...

  17. Distributed energy generation techniques and the competitive fringe effect in electricity markets

    Mulder, Machiel; Petrikaite, Vaiva; Scholtens, Bert

    2015-01-01

    We analyse the impact of two different generation techniques used by fringe suppliers on the intensity of competition in the electricity wholesale market. For that purpose, we derive a Cournot model of this market taking into account long-term contracts, international trade and fringe suppliers

  18. Single-shot color fringe projection for three-dimensional shape measurement of objects with discontinuities.

    Dai, Meiling; Yang, Fujun; He, Xiaoyuan

    2012-04-20

    A simple but effective fringe projection profilometry is proposed to measure 3D shape by using one snapshot color sinusoidal fringe pattern. One color fringe pattern encoded with a sinusoidal fringe (as red component) and one uniform intensity pattern (as blue component) is projected by a digital video projector, and the deformed fringe pattern is recorded by a color CCD camera. The captured color fringe pattern is separated into its RGB components and division operation is applied to red and blue channels to reduce the variable reflection intensity. Shape information of the tested object is decoded by applying an arcsine algorithm on the normalized fringe pattern with subpixel resolution. In the case of fringe discontinuities caused by height steps, or spatially isolated surfaces, the separated blue component is binarized and used for correcting the phase demodulation. A simple and robust method is also introduced to compensate for nonlinear intensity response of the digital video projector. The experimental results demonstrate the validity of the proposed method.

  19. 49 CFR 1242.38 - Fringe benefits (account 12-26-00).

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Fringe benefits (account 12-26-00). 1242.38 Section 1242.38 Transportation Other Regulations Relating to Transportation (Continued) SURFACE...-Equipment § 1242.38 Fringe benefits (account 12-26-00). Separate common expenses in proportion to the split...

  20. Theoretical Analysis of Interferometer Wave Front Tilt and Fringe Radiant Flux on a Rectangular Photodetector

    Franz Konstantin Fuss

    2013-09-01

    Full Text Available This paper is a theoretical analysis of mirror tilt in a Michelson interferometer and its effect on the radiant flux over the active area of a rectangular photodetector or image sensor pixel. It is relevant to sensor applications using homodyne interferometry where these opto-electronic devices are employed for partial fringe counting. Formulas are derived for radiant flux across the detector for variable location within the fringe pattern and with varying wave front angle. The results indicate that the flux is a damped sine function of the wave front angle, with a decay constant of the ratio of wavelength to detector width. The modulation amplitude of the dynamic fringe pattern reduces to zero at wave front angles that are an integer multiple of this ratio and the results show that the polarity of the radiant flux changes exclusively at these multiples. Varying tilt angle causes radiant flux oscillations under an envelope curve, the frequency of which is dependent on the location of the detector with the fringe pattern. It is also shown that a fringe count of zero can be obtained for specific photodetector locations and wave front angles where the combined effect of fringe contraction and fringe tilt can have equal and opposite effects. Fringe tilt as a result of a wave front angle of 0.05° can introduce a phase measurement difference of 16° between a photodetector/pixel located 20 mm and one located 100 mm from the optical origin.

  1. Commuting-related fringe benefits in the Netherlands : Interrelationships and company, employee and location characteristics

    Nijland, Linda; Dijst, Martin

    2015-01-01

    Mobility management measures taken by firms could potentially result in more sustainable transport choices and hence reduce traffic congestion and emissions. Fringe benefits offered to employees are a means to implement those measures. This paper explores the most common commuting-related fringe

  2. Controlling coulomb interactions in infrared stereometamaterials for unity light absorption

    Mudachathi, Renilkumar; Moritake, Yuto; Tanaka, Takuo

    2018-05-01

    We investigate the influence of near field interactions between the constituent 3D split ring resonators on the absorbance and resonance frequency of a stereo metamaterial based perfect light absorber. The experimental and theoretical analyses reveal that the magnetic resonance red shifts and broadens for both the decreasing vertical and lateral separations of the constituents within the metamaterial lattice, analogous to plasmon hybridization. The strong interparticle interactions for higher density reduce the effective cross-section per resonator, which results in weak light absorption observed in both experimental and theoretical analyses. The red shift of the magnetic resonance with increasing lattice density is an indication of the dominating electric dipole interactions and we analyzed the metamaterial system in an electrostatic point of view to explain the observed resonance shift and decreasing absorption peak. From these analyses, we found that the fill factor introduces two competing factors determining the absorption efficiency such as coulomb interactions between the constituent resonators and their number density in a given array structure. We predicted unity light absorption for a fill factor of 0.17 balancing these two opposing factors and demonstrate an experimental absorbance of 99.5% at resonance with our 3D device realized using residual stress induced bending of 2D patterns.

  3. The Paradigm of Unity in Prenatal Education and Pedagogy

    Kornas-Biela Dorota

    2014-07-01

    Full Text Available The traditional approach to the relation between parents and their prenatal child presents the child as a fetus, a mainly passive recipient of the mother’s vital biological resources. Contemporary prenatal psychology and pedagogy recognizes this relationship in a quite different perspective: the prenatal child is a member of the family and may be seen as an active member of the wider family as a community, extended to grandparents and other relatives. Between parents and their child in the womb exists a reciprocal relationship at a physiological (hormonal, psychological and spiritual level. The prenatal child communicates with the parents in different ways and reacts to their stimulation (acoustic, tactile, loco-motoric, chemo-receptive, thermo-receptive, and emotional. This dialogue of the parents and their prenatal child enriches each member of the family community. In this sense, the prenatal child is a gift and a challenge for the parents to develop their personality, social competences and spiritual life. The reflections presented in this paper fit the conception of the paradigm of unity applied into the area of prenatal education and prenatal pedagogy as a new pedagogical subdisciline.

  4. UNITY IN DIVERSITY. THE EUROPEAN UNION’S MULTILINGUALISM

    Laura-Cristiana SPĂTARU-NEGURĂ

    2016-06-01

    Full Text Available It is undeniable that the European Union represents the most ambitious legal and linguistic project, integrating 28 Member States and 24 official languages. What we undertook with this study was to explore the importance of multilingualism in the European Union and the problems that unity in diversity involves. This study tried to touch upon both theoretical aspects (i.e., what the multilingualism of EU law implies and practical issues (i.e., the interaction between legal languages at national and at EU level, problems emerging from multilingualism, illustrated by the relevant case law of the European Court of Justice. In many ECJ cases, it was underlined that multilingualism is essential to the EU legal order. The meaning of EU law cannot be derived from one version of the official languages and the ECJ regularly heads for a uniform interpretation of the contradictory versions. The present study is part of a more complex research on this theme and it is meant to approach certain important points of my PhD thesis. A first part of this research on multilingualism has already been published.

  5. An improved principal component analysis based region matching method for fringe direction estimation

    He, A.; Quan, C.

    2018-04-01

    The principal component analysis (PCA) and region matching combined method is effective for fringe direction estimation. However, its mask construction algorithm for region matching fails in some circumstances, and the algorithm for conversion of orientation to direction in mask areas is computationally-heavy and non-optimized. We propose an improved PCA based region matching method for the fringe direction estimation, which includes an improved and robust mask construction scheme, and a fast and optimized orientation-direction conversion algorithm for the mask areas. Along with the estimated fringe direction map, filtered fringe pattern by automatic selective reconstruction modification and enhanced fast empirical mode decomposition (ASRm-EFEMD) is used for Hilbert spiral transform (HST) to demodulate the phase. Subsequently, windowed Fourier ridge (WFR) method is used for the refinement of the phase. The robustness and effectiveness of proposed method are demonstrated by both simulated and experimental fringe patterns.

  6. Theoretical analysis of moiré fringe multiplication under a scanning electron microscope

    Li, Yanjie; Xie, Huimin; Chen, Pengwan; Zhang, Qingming

    2011-01-01

    In this study, theoretical analysis and experimental verification of fringe multiplication under a scanning electron microscope (SEM) are presented. Fringe multiplication can be realized by enhancing the magnification or the number of scanning lines under the SEM. A universal expression of the pitch of moiré fringes is deduced. To apply this method to deformation measurement, the calculation formulas of strain and displacement are derived. Compared to natural moiré, the displacement sensitivity is increased by fringe multiplication while the strain sensitivity may be retained or enhanced depending on the number of scanning lines used. The moiré patterns are formed by the interference of a 2000 lines mm −1 grating with the scanning lines of SEM, and the measured parameters of moiré fringes from experimental results agree well with theoretical analysis

  7. Modeling of cylindrical surrounding gate MOSFETs including the fringing field effects

    Gupta, Santosh K.; Baishya, Srimanta

    2013-01-01

    A physically based analytical model for surface potential and threshold voltage including the fringing gate capacitances in cylindrical surround gate (CSG) MOSFETs has been developed. Based on this a subthreshold drain current model has also been derived. This model first computes the charge induced in the drain/source region due to the fringing capacitances and considers an effective charge distribution in the cylindrically extended source/drain region for the development of a simple and compact model. The fringing gate capacitances taken into account are outer fringe capacitance, inner fringe capacitance, overlap capacitance, and sidewall capacitance. The model has been verified with the data extracted from 3D TCAD simulations of CSG MOSFETs and was found to be working satisfactorily. (semiconductor devices)

  8. Adaptive enhancement of optical fringe patterns by selective reconstruction using FABEMD algorithm and Hilbert spiral transform.

    Trusiak, Maciej; Patorski, Krzysztof; Wielgus, Maciej

    2012-10-08

    Presented method for fringe pattern enhancement has been designed for processing and analyzing low quality fringe patterns. It uses a modified fast and adaptive bidimensional empirical mode decomposition (FABEMD) for the extraction of bidimensional intrinsic mode functions (BIMFs) from an interferogram. Fringe pattern is then selectively reconstructed (SR) taking the regions of selected BIMFs with high modulation values only. Amplitude demodulation and normalization of the reconstructed image is conducted using the spiral phase Hilbert transform (HS). It has been tested using computer generated interferograms and real data. The performance of the presented SR-FABEMD-HS method is compared with other normalization techniques. Its superiority, potential and robustness to high fringe density variations and the presence of noise, modulation and background illumination defects in analyzed fringe patterns has been corroborated.

  9. Analysis of the localization of Michelson interferometer fringes using Fourier optics and temporal coherence

    Narayanamurthy, C S

    2009-01-01

    Fringes formed in a Michelson interferometer never localize in any plane, in the detector plane and in the localization plane. Instead, the fringes are assumed to localize at infinity. Except for some explanation in Principles of Optics by Born and Wolf (1964 (New York: Macmillan)), the fringe localization phenomena of Michelson's interferometer have never been analysed seriously in any book. Because Michelson's interferometer is one of the important and fundamental optical experiments taught at both undergraduate and graduate levels, it would be appropriate to explain the localization of these fringes. In this paper, we analyse the localization of Michelson interferometer fringes using Fourier optics and temporal coherence, and show that they never localize at any plane even at infinity

  10. A second-order approximation of particle motion in the fringing field of a dipole magnet

    Tarantin, N.I.

    1980-01-01

    The radial and axial motion of charged particles in the fringing field of an arbitrary dipole magnet has been considered with accuracy to the second-order of small quantities. The dipole magnet has an inhomogeneous field and oblique entrance and exit boundaries in the form of second-order curves. The region of the fringing field has a variable extension. A new definition of the effective boundary of the real fringing field has a variable extension. A new definition of the effective boundary of the real fringing field of the dipole magnet is used. A better understanding of the influence of the fringing magnetic field on the motion of charged particles in the pole gap of the dipole magnet has been obtained. In particular, it is shown that it is important to take into account, in the second approximation, some terms related formally to the next approximations. The results are presented in a form convenient for practical calculations. (orig.)

  11. Making Invisible Histories Visible

    Hanssen, Ana Maria

    2012-01-01

    This article features Omaha Public Schools' "Making Invisible Histories Visible" program, or MIHV. Omaha's schools have a low failure rate among 8th graders but a high one among high school freshmen. MIHV was created to help at-risk students "adjust to the increased demands of high school." By working alongside teachers and…

  12. Visible Solid State Lasers

    Hikmet, R.A.M.

    2007-01-01

    Diode lasers can be found in various applications most notably in optical communication and optical storage. Visible lasers were until recently were all based on IR diode lasers. Using GaN, directly blue and violet emitting lasers have also been introduced to the market mainly in the area of optical

  13. 20 CFR 641.873 - What minimum expenditure levels are required for participant wages and fringe benefits?

    2010-04-01

    ... for participant wages and fringe benefits? 641.873 Section 641.873 Employees' Benefits EMPLOYMENT AND... wages and fringe benefits? (a) Not less than 75 percent of the SCSEP funds provided under a grant from the Department must be used to pay for the wages and fringe benefits of participants in such projects...

  14. 29 CFR 4.1b - Payment of minimum compensation based on collectively bargained wage rates and fringe benefits...

    2010-07-01

    ... bargained wage rates and fringe benefits applicable to employment under predecessor contract. 4.1b Section 4... collectively bargained wage rates and fringe benefits applicable to employment under predecessor contract. (a) Section 4(c) of the Service Contract Act of 1965 as amended provides special minimum wage and fringe...

  15. RAZVOJ RAČUNALNIŠKIH IGER S POMOČJO GRAFIČNEGA POGONA UNITY

    Babič, Teo

    2013-01-01

    V tej diplomski nalogi bomo pregledali grafični pogon Unity, ki služi kot orodje za razvoj računalniških iger. Spoznali bomo orodja, ki jih grafični pogon Unity uporablja pri izdelovanju iger. To zajema: urejevalnik okolja Unity, materiale in njihove senčnike, delo s fizikalnimi lastnostmi objektov, zvok in orodje za osvetlitev znotraj igre. Vse naštete komponente bomo praktično uporabili in predstavili ob gradnji realno časovne strateške igre Varovanje terena za internetni brskalnik. O...

  16. Investigation of relation between motivation of success and team unity of sportsmen

    Soyer, Fikret; Can, Yusuf; Güven, Hacer; Hergüner, Gülten; Bayansalduz, Mehmet; Tetik, Burcu

    2010-01-01

    The aim of the research is to investigate the relation between motivation of success and team unity of the sportsmen.120 sportsmen at the age of 13-34 from Kayseri and Mersin joined to this research willingly. The scale of Willis Motivation of Success Unique to Sports and Inventary of Team Unity adopted to Turkish population by the Süleyman Moralı were carried out to the enquetees.As a consequence of the correlation analysis, a positive relation at 0,05 degree was obtained between team unity ...

  17. Adaptive DIT-Based Fringe Tracking and Prediction at IOTA

    Wilson, Edward; Pedretti, Ettore; Bregman, Jesse; Mah, Robert W.; Traub, Wesley A.

    2004-01-01

    An automatic fringe tracking system has been developed and implemented at the Infrared Optical Telescope Array (IOTA). In testing during May 2002, the system successfully minimized the optical path differences (OPDs) for all three baselines at IOTA. Based on sliding window discrete Fourier transform (DFT) calculations that were optimized for computational efficiency and robustness to atmospheric disturbances, the algorithm has also been tested extensively on off-line data. Implemented in ANSI C on the 266 MHZ PowerPC processor running the VxWorks real-time operating system, the algorithm runs in approximately 2.0 milliseconds per scan (including all three interferograms), using the science camera and piezo scanners to measure and correct the OPDs. Preliminary analysis on an extension of this algorithm indicates a potential for predictive tracking, although at present, real-time implementation of this extension would require significantly more computational capacity.

  18. Engaging Fringe Stakeholders in Business and Society Research

    McCarthy, Lauren; Muthuri, Judy N.

    2018-01-01

    Business and society (B&S) researchers, as well as practitioners, have been critiqued for ignoring those with less voice and power (e.g., women, nonliterate, or indigenous peoples) often referred to as “fringe stakeholders.” Existing methods used in B&S research often fail to address issues...... methods may be used by researchers to achieve more inclusive, and thus more credible, stakeholder research that can improve decision making within businesses. Furthermore, we argue that ingrained social and environmental problems tackled by B&S research and the unique context in which they occur may open...... of meaningful participation, voice and power, especially in developing countries. In this article, we stress the utility of visual participatory research (VPR) methods in B&S research to fill this gap. Through a case study on engaging Ghanaian cocoa farmers on gender inequality issues, we explore how VPR...

  19. Observations of infragravity motions for reef fringed islands and atolls

    Becker, J. M.; Merrifield, M. A.; Ford, M.

    2012-12-01

    The frequency of flooding events that affect low lying islands and atolls in the Pacific is expected to increase under current sea level rise projections. Infragravity (IG) motions, with periods ranging from approximately 25 to 400 seconds, are an important component of wave driven flooding events for reef fringed islands and atolls. The IG variability during wave events is analyzed and interpreted dynamically from pressure and current observations at four cross-reef transects in the North Pacific Ocean that include sites in the Republic of the Marshall Islands and Guam. The IG motions are shown to depend upon the spectral properties of the incident wave forcing and reef flat characteristics that include reef flat length (ranging from 100m to 450m at the four sites) and total water level due to setup and tides. A small inundation event at one of the sites is shown to occur due to large shoreline infragravity energy.

  20. Rapid matching of stereo vision based on fringe projection profilometry

    Zhang, Ruihua; Xiao, Yi; Cao, Jian; Guo, Hongwei

    2016-09-01

    As the most important core part of stereo vision, there are still many problems to solve in stereo matching technology. For smooth surfaces on which feature points are not easy to extract, this paper adds a projector into stereo vision measurement system based on fringe projection techniques, according to the corresponding point phases which extracted from the left and right camera images are the same, to realize rapid matching of stereo vision. And the mathematical model of measurement system is established and the three-dimensional (3D) surface of the measured object is reconstructed. This measurement method can not only broaden application fields of optical 3D measurement technology, and enrich knowledge achievements in the field of optical 3D measurement, but also provide potential possibility for the commercialized measurement system in practical projects, which has very important scientific research significance and economic value.

  1. Accurate Calculation of Fringe Fields in the LHC Main Dipoles

    Kurz, S; Siegel, N

    2000-01-01

    The ROXIE program developed at CERN for the design and optimization of the superconducting LHC magnets has been recently extended in a collaboration with the University of Stuttgart, Germany, with a field computation method based on the coupling between the boundary element (BEM) and the finite element (FEM) technique. This avoids the meshing of the coils and the air regions, and avoids the artificial far field boundary conditions. The method is therefore specially suited for the accurate calculation of fields in the superconducting magnets in which the field is dominated by the coil. We will present the fringe field calculations in both 2d and 3d geometries to evaluate the effect of connections and the cryostat on the field quality and the flux density to which auxiliary bus-bars are exposed.

  2. Social media visibility

    Uldam, Julie

    2018-01-01

    of activists remains under-researched. This article examines BP’s surveillance of activists who criticise the company’s corporate social responsibility (CSR) programme as ‘greenwashing’. In this way, it goes beyond corporations’ uses of big data and instead explores how they monitor and discuss strategies......As activists move from alternative media platforms to commercial social media platforms, they face increasing challenges in protecting their online security and privacy. While government surveillance of activists is well-documented in scholarly research and the media, corporate surveillance...... for responding to the activities of individual activists in social media. It shows that while social media afford an unprecedented level of visibility for activists, it comes with the risk of being monitored by corporations. Theoretically, it draws on conceptions of visibility in social sciences and media...

  3. Making Heat Visible

    Goodhew, Julie; Pahl, Sabine; Auburn, Tim; Goodhew, Steve

    2015-01-01

    Householders play a role in energy conservation through the decisions they make about purchases and installations such as insulation, and through their habitual behavior. The present U.K. study investigated the effect of thermal imaging technology on energy conservation, by measuring the behavioral effect after householders viewed images of heat escaping from or cold air entering their homes. In Study 1 (n = 43), householders who received a thermal image reduced their energy use at a 1-year follow-up, whereas householders who received a carbon footprint audit and a non-intervention control demonstrated no change. In Study 2 (n = 87), householders were nearly 5 times more likely to install draught proofing measures after seeing a thermal image. The effect was especially pronounced for actions that addressed an issue visible in the images. Findings indicate that using thermal imaging to make heat loss visible can promote energy conservation. PMID:26635418

  4. Paradoxes of Visibility

    Tarnay László

    2017-12-01

    Full Text Available The paper investigates two possible critical arguments following the pictorial turn. The first is formulated within ocularcentrism, the dominance of sight, and starts with the right to visibility as a general principle that governs today’s digital culture but gets twisted in special cases like the Auschwitz photos of the Shoa, the Abu Ghraib prison videos, or recently the website called Yolocaust. The second is conceived outside the visual culture and is meant to vindicate the other senses vis-à-vis the eyes. However, the argument is truncated here only to highlight the boomerang effect of the other senses: haptic vision. It is the case of visual perception when (a there is a lack of things to see and (b indeterminate synaesthesia: when vision intensifies the other senses in the embodied viewer. The two arguments converge upon a dialectic of the visible and the imaginable, which is formulated here as two paradoxes that the discussed examples transcend. By enforcing visibility at all costs where there is hardly anything recognizable to see, they lead to two diverging results. On the one hand, the meaning of “image” is extended toward the unimaginable, the traumatic experience, on the other hand, it is extended toward the invisible, the encounter with the radical Other.

  5. The benefits of visibility

    Krupnick, A.; DeWitt, D.

    1994-01-01

    The benefits of visibility improvement (or the damages with additional degradation) refer to increases (or decreases) in utility obtained in three different dimensions. The first of these is associated with the nature of the visibility change. Visual range may be improved so that features of an area become more distinct or the sky becomes clearer. Alternatively, normal features of an area may be marred, say by the site of a power plant or its plume (called plume blight). The second dimension is the location of the change: in an urban area, in a rural setting, or in a recreational area or area of particular beauty, such as the Grand Canyon. The third dimension is the type of value: use or non-use. Thus, a person who visits the Grand Canyon (or may visit it in the future) may hold use values for improving his view of the Canyon or its surroundings and may also old non-use values for improved visibility (whether for altruistic or other reasons) irrespective of present or planned visits. In all, therefore, there are 12 possible combinations of the elements in these three dimension, each of which is logically distinct from the others and which demands attention in the literature to derive willingness to pay (WTP)

  6. The benefits of visibility

    Krupnick, A; DeWitt, D

    1994-07-01

    The benefits of visibility improvement (or the damages with additional degradation) refer to increases (or decreases) in utility obtained in three different dimensions. The first of these is associated with the nature of the visibility change. Visual range may be improved so that features of an area become more distinct or the sky becomes clearer. Alternatively, normal features of an area may be marred, say by the site of a power plant or its plume (called plume blight). The second dimension is the location of the change: in an urban area, in a rural setting, or in a recreational area or area of particular beauty, such as the Grand Canyon. The third dimension is the type of value: use or non-use. Thus, a person who visits the Grand Canyon (or may visit it in the future) may hold use values for improving his view of the Canyon or its surroundings and may also old non-use values for improved visibility (whether for altruistic or other reasons) irrespective of present or planned visits. In all, therefore, there are 12 possible combinations of the elements in these three dimension, each of which is logically distinct from the others and which demands attention in the literature to derive willingness to pay (WTP)

  7. Entanglement detection from interference fringes in atom-photon systems

    Suzuki, Jun; Nemoto, Kae; Miniatura, Christian

    2010-01-01

    A measurement scheme of atomic qubits pinned at given positions is studied by analyzing the interference pattern obtained when they emit photons spontaneously. In the case of two qubits, a well-known relation is revisited in which the interference visibility is equal to the concurrence of the state in the infinite spatial separation limit of the qubits. By taking into account the superradiant and subradiant effects, it is shown that a state tomography is possible when the qubit spatial separation is comparable to the wavelength of the atomic transition. In the case of three qubits, the relations between various entanglement measures and the interference visibility are studied, where the visibility is defined from the two-qubit case. A qualitative correspondence among these entanglement relations is discussed. In particular, it is shown that the interference visibility is directly related to the maximal bipartite negativity.

  8. Unity of Command: An Answer to the Maritime Homeland Security Interagency Quagmire

    Hanson, Darren J

    2008-01-01

    .... However, effective operational command and control (C2) to ensure unity of effort of the myriad federal and state agencies involved in MHS still does not exist to prevent or recover from a terrorist attack or natural disaster...

  9. Utilization characteristics and importance of woody biomass resources on the rural-urban fringe in botswana.

    Nkambwe, Musisi; Sekhwela, Mogodisheng B M

    2006-02-01

    This article examines the utilization characteristics and importance of woody biomass resources in the rural-urban fringe zones of Botswana. In the literature for Africa, attention has been given to the availability and utilization of biomass in either urban or rural environments, but the rural-urban fringe has been neglected. Within southern Africa, this neglect is not justified; the rural-urban fringe, not getting the full benefits available in urban environments in Botswana, has developed problems in woody biomass availability and utilization that require close attention. In this article, socioeconomic data on the importance of woody biomass in the Batlokwa Tribal Territory, on the rural-urban fringe of Gaborone, Botswana, were collected together with ecologic data that reveal the utilization characteristics and potential for regrowth of woody biomass. The analysis of these results show that local woody biomass is very important in the daily lives of communities in the rural-urban fringe zones and that there is a high level of harvesting. However, there is no effort in planning land use in the tribal territory to either conserve this resource or provide alternatives to its utilization. The future of woody biomass resources in Botswana's rural-urban fringe is uncertain. The investigators recommend that a comprehensive policy for the development of the rural-urban fringe consider the importance of this resource. The neglect of this resource will have far-reaching implications on the livelihoods of residents as well as the environment in this zone.

  10. Observation of electron beam moiré fringes in an image conversion tube

    Lei, Yunfei; Liao, Yubo [Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education, Shenzhen University, Shenzhen 518060 (China); Long, Jing-hua [College of Physics Science and Technology, Shenzhen University, Shenzhen 518060 (China); Cai, Houzhi; Bai, Yanli [Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education, Shenzhen University, Shenzhen 518060 (China); Liu, Jinyuan, E-mail: ljy@szu.edu.cn [Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education, Shenzhen University, Shenzhen 518060 (China)

    2016-11-15

    An image conversion tube with a magnetic lens was designed to observe electron beam moiré fringes. Electron beam moiré fringes result from the interference between the photocathode and the anode meshes. The photocathode had a strip line structure with a spatial frequency of 10 L/mm. The anode mesh had a fixed spatial frequency of 10 L/mm, and could be rotated around the axis of the image tube. The changes to the fringe direction and the spacing as a function of the rotation angle between the photocathode and the anode mesh were examined. The experimental results agreed with the theoretical analysis. Moiré fringes with a modulation of ~20% were obtained using a 3 keV electron beam. - Highlights: • Observe the electron beam moiré fringes in large angle of view. • The changes to the fringe direction and the spacing as a function of the rotation angle between the two gratings were examined. • Modulations of the moiré fringes in different rotation angle are recorded.

  11. Observation of electron beam moiré fringes in an image conversion tube

    Lei, Yunfei; Liao, Yubo; Long, Jing-hua; Cai, Houzhi; Bai, Yanli; Liu, Jinyuan

    2016-01-01

    An image conversion tube with a magnetic lens was designed to observe electron beam moiré fringes. Electron beam moiré fringes result from the interference between the photocathode and the anode meshes. The photocathode had a strip line structure with a spatial frequency of 10 L/mm. The anode mesh had a fixed spatial frequency of 10 L/mm, and could be rotated around the axis of the image tube. The changes to the fringe direction and the spacing as a function of the rotation angle between the photocathode and the anode mesh were examined. The experimental results agreed with the theoretical analysis. Moiré fringes with a modulation of ~20% were obtained using a 3 keV electron beam. - Highlights: • Observe the electron beam moiré fringes in large angle of view. • The changes to the fringe direction and the spacing as a function of the rotation angle between the two gratings were examined. • Modulations of the moiré fringes in different rotation angle are recorded.

  12. FIMBRIN1 is involved in lily pollen tube growth by stabilizing the actin fringe.

    Su, Hui; Zhu, Jinsheng; Cai, Chao; Pei, Weike; Wang, Jiaojiao; Dong, Huaijian; Ren, Haiyun

    2012-11-01

    An actin fringe structure in the subapex plays an important role in pollen tube tip growth. However, the precise mechanism by which the actin fringe is generated and maintained remains largely unknown. Here, we cloned a 2606-bp full-length cDNA encoding a deduced 77-kD fimbrin-like protein from lily (Lilium longiflorum), named FIMBRIN1 (FIM1). Ll-FIM1 was preferentially expressed in pollen and concentrated at actin fringe in the subapical region, as well as in longitudinal actin-filament bundles in the shank of pollen tubes. Microinjection of Ll-FIM1 antibody into lily pollen tubes inhibited tip growth and disrupted the actin fringe. Furthermore, we verified the function of Ll-FIM1 in the fim5 mutant of its closest relative, Arabidopsis thaliana. Pollen tubes of fim5 mutants grew with a larger diameter in early stages but could recover into normal forms in later stages, despite significantly slower growth rates. The actin fringe of the fim5 mutants, however, was impaired during both early and late stages. Impressively, stable expression of fim5pro:GFP:Ll-FIM1 rescued the actin fringe and the growth rate of Arabidopsis fim5 pollen tubes. In vitro biochemical analysis showed that Ll-FIM1 could bundle actin filaments. Thus, our study has identified a fimbrin that may stabilize the actin fringe by cross-linking actin filaments into bundles, which is important for proper tip growth of lily pollen tubes.

  13. Manic fringe inhibits tumor growth by suppressing Notch3 degradation in lung cancer.

    Yi, Fuming; Amarasinghe, Baru; Dang, Thao P

    2013-01-01

    Notch signaling plays an essential role in development as well as cancer. We have previously shown that Notch3 is important for lung cancer growth and survival. Notch receptors are activated through the interaction with their ligands, resulting in proteolytic cleavage of the receptors. This interaction is modulated by Fringe, a family of fucose-specific β1,3 N-acetylglucosaminyltransferases that modify the extracellular subunit of Notch receptors. Studies in developmental models showed that Fringe enhances Notch's response to Delta ligands at the expense of Jagged ligands. We observed that Manic Fringe expression is down-regulated in lung cancer. Since Jagged1, a known ligand for Notch3, is often over-expressed in lung cancer, we hypothesized that Fringe negatively regulates Notch3 activation. In this study, we show that re-expression of Manic Fringe down-regulates Notch3 target genes HES1 and HeyL and reduces tumor phenotype in vitro and in vivo. The mechanism for this phenomenon appears to be related to modulation of Notch3 protein stability. Proteasome inhibition reverses Manic Fringe-induced protein turnover. Taken together, our data provide the first evidence that Manic Fringe functions as a tumor suppressor in the lung and that the mechanism of its anti-tumor activity is mediated by inhibition of Notch3 activation.

  14. Automatic fringe enhancement with novel bidimensional sinusoids-assisted empirical mode decomposition.

    Wang, Chenxing; Kemao, Qian; Da, Feipeng

    2017-10-02

    Fringe-based optical measurement techniques require reliable fringe analysis methods, where empirical mode decomposition (EMD) is an outstanding one due to its ability of analyzing complex signals and the merit of being data-driven. However, two challenging issues hinder the application of EMD in practical measurement. One is the tricky mode mixing problem (MMP), making the decomposed intrinsic mode functions (IMFs) have equivocal physical meaning; the other is the automatic and accurate extraction of the sinusoidal fringe from the IMFs when unpredictable and unavoidable background and noise exist in real measurements. Accordingly, in this paper, a novel bidimensional sinusoids-assisted EMD (BSEMD) is proposed to decompose a fringe pattern into mono-component bidimensional IMFs (BIMFs), with the MMP solved; properties of the resulted BIMFs are then analyzed to recognize and enhance the useful fringe component. The decomposition and the fringe recognition are integrated and the latter provides a feedback to the former, helping to automatically stop the decomposition to make the algorithm simpler and more reliable. A series of experiments show that the proposed method is accurate, efficient and robust to various fringe patterns even with poor quality, rendering it a potential tool for practical use.

  15. Effective bias removal for fringe projection profilometry using the dual-tree complex wavelet transform.

    Ng, William Wai-Lam; Lun, Daniel Pak-Kong

    2012-08-20

    When reconstructing the three-dimensional (3D) object height profile using the fringe projection profilometry (FPP) technique, the light intensity reflected from the object surface can yield abruptly changing bias in the captured fringe image, which leads to severe reconstruction error. The traditional approach tries to remove the bias by suppressing the zero spectrum of the fringe image. It is based on the assumption that the aliasing between the frequency spectrum of the bias, which is around the zero frequency, and the frequency spectrum of the fringe is negligible. This, however, is not the case in practice. In this paper, we propose a novel (to our knowledge) technique to eliminate the bias in the fringe image using the dual-tree complex wavelet transform (DT-CWT). The new approach successfully identifies the features of bias, fringe, and noise in the DT-CWT domain, which allows the bias to be effectively extracted from a noisy fringe image. Experimental results show that the proposed algorithm is superior to the traditional methods and facilitates accurate reconstruction of objects' 3D models.

  16. Acoustic grating fringe projector for high-speed and high-precision three-dimensional shape measurements

    Yin Xuebing; Zhao Huijie; Zeng Junyu; Qu Yufu

    2007-01-01

    A new acoustic grating fringe projector (AGFP) was developed for high-speed and high-precision 3D measurement. A new acoustic grating fringe projection theory is also proposed to describe the optical system. The AGFP instrument can adjust the spatial phase and period of fringes with unprecedented speed and accuracy. Using rf power proportional-integral-derivative (PID) control and CCD synchronous control, we obtain fringes with fine sinusoidal characteristics and realize high-speed acquisition of image data. Using the device, we obtained a precise phase map for a 3D profile. In addition, the AGFP can work in running fringe mode, which could be applied in other measurement fields

  17. Ultrafast layer based computer-generated hologram calculation with sparse template holographic fringe pattern for 3-D object.

    Kim, Hak Gu; Man Ro, Yong

    2017-11-27

    In this paper, we propose a new ultrafast layer based CGH calculation that exploits the sparsity of hologram fringe pattern in 3-D object layer. Specifically, we devise a sparse template holographic fringe pattern. The holographic fringe pattern on a depth layer can be rapidly calculated by adding the sparse template holographic fringe patterns at each object point position. Since the size of sparse template holographic fringe pattern is much smaller than that of the CGH plane, the computational load can be significantly reduced. Experimental results show that the proposed method achieves 10-20 msec for 1024x1024 pixels providing visually plausible results.

  18. [Philosophers, physicists and physicians in defense of the unity of the scientific method].

    Antiseri, D

    1998-01-01

    The falsifiability of scientific knowledge is an acquired result of contemporary philosophy of science and yet there is not a universal consensus upon the idea of the unity of scientific method. Albeit there are differences in techniques of testing (methodics) hypotheses in the vast field of research, the author, following the critical rationalism of Karl Popper, favors the perspective of the unity of method in natural as well in social and philological sciences.

  19. Technical Training: Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro et Concept

    Monique Duval

    2005-01-01

    Un nouveau cours pratique sur les environnements Premium et Quantum de Schneider est proposé aux automaticiens concepteurs ou installateurs, et aux techniciens de bureau d'études, pour découvrir l'outil de programmation Unity. La prochaine session aura lieu du 24 au 28 janvier 2005. Le cours est ouvert aux personnes capables de développer sous PL7-Pro ou Concept. Objectifs : Maîtriser les différences fonctionnelles d'Unity-Pro par rapport à PL7 et Concept ; programmer en Unity-Pro sur Base Premium et Quantum. Programme : Environnement Quantum et Coupleur Profibus (1 journée) : configuration d'un automate sous Unity Pro et d'un coupleur Profibus DP. Conversion à Unity sur base Quantum et Premium (3,5 jours) : l'offre globale Unity, evolution par rapport à PL7 et Concept ; conversion d'application depuis PL7 Pro ; outils de mise au point ; manipulation des variables structurées ; utilisation des fonctions ; gestion des DF...

  20. Unity and catholicity in the Korean Presbyterian Church: An ecumenical Reformed assessment

    Jaegeon Ha

    2016-03-01

    Full Text Available I attempt to find the main causes of the serious disunity in the Presbyterian Church in Korea (PCK, which started as one church but is now divided into more than 100 denominations, as well as a solution to promote the unity of the PCK. This attempt starts with an exegesis of Ephesians, with special reference to Ephesians 4:1�16, to understand the biblical principle on this matter. This article draws on a mature ecclesiology and a mature sense of unity as key concepts. After that, the history of the PCK disunity is briefly described, dealing with four major schisms. Based on this historical investigation, the disunity in the PCK is assessed. In addition, the weak sense of unity and weak ecclesiology of the PCK, which played a role in its disunity, are discussed in view of the confessions of faith, the ministry of the word and the Lord�s Supper, and ecumenical efforts in relation to national and international ecumenical organisations. Lastly, contributory suggestions based on the mature sense of unity are offered to the PCK in particular and the Reformed family and all Christian churches in general.Intradisciplinary and/or interdisciplinary implications: In my ecumenical Reformed intradisciplinary assessment of unity and catholicity in the PCK, which started as one church but is now divided into more than 100 denominations, I identify the main causes of serious disunity in the PCK, namely a weak sense of unity, immaturity and secularisation.

  1. REMOVAL OF SPECTRO-POLARIMETRIC FRINGES BY TWO-DIMENSIONAL PATTERN RECOGNITION

    Casini, R.; Judge, P. G.; Schad, T. A.

    2012-01-01

    We present a pattern-recognition-based approach to the problem of the removal of polarized fringes from spectro-polarimetric data. We demonstrate that two-dimensional principal component analysis can be trained on a given spectro-polarimetric map in order to identify and isolate fringe structures from the spectra. This allows us, in principle, to reconstruct the data without the fringe component, providing an effective and clean solution to the problem. The results presented in this paper point in the direction of revising the way that science and calibration data should be planned for a typical spectro-polarimetric observing run.

  2. A generalization of the theory of fringe patterns containing displacement information

    Sciammarella, C. A.; Bhat, G.

    The theory that provides the interpretation of interferometric fringes as frequency modulated signals, is used to show that the electrooptical system used to analyze fringe patterns can be considered as a simultaneous Fourier spectrum analyzer. This interpretation generalizes the quasi-heterodyning techniques. It is pointed out that the same equations that yield the discrete Fourier transform as summations, yield correct values for a reduced number of steps. Examples of application of the proposed technique to electronic holography are given. It is found that for a uniform field the standard deviation of the individual readings is 1/20 of the fringe spacing.

  3. Note: Using a Kösters prism to create a fringe pattern.

    Capellmann, R F; Bewerunge, J; Platten, F; Egelhaaf, S U

    2017-05-01

    The interference of two crossed laser beams results in a standing wave. Such fringe patterns are exploited in different instruments such as interferometers or laser-Doppler anemometers. We create a fringe pattern in the sample plane of a microscope using a compact apparatus based on a Kösters prism. The fringe pattern is shown to be spatially and temporally very stable, covers a large area, and its spacing is easily tunable. In addition, we exploit it to impose a sinusoidal potential on colloidal particles.

  4. Fringe patterns generated by micro-optical sensors for pattern recognition.

    Tamee, Kreangsak; Chaiwong, Khomyuth; Yothapakdee, Kriengsak; Yupapin, Preecha P

    2015-01-01

    We present a new result of pattern recognition generation scheme using a small-scale optical muscle sensing system, which consisted of an optical add-drop filter incorporating two nonlinear optical side ring resonators. When light from laser source enters into the system, the device is stimulated by an external physical parameter that introduces a change in the phase of light propagation within the sensing device, which can be formed by the interference fringe patterns. Results obtained have shown that the fringe patterns can be used to form the relationship between signal patterns and fringe pattern recognitions.

  5. Fringe fields modeling for the high luminosity LHC large aperture quadrupoles

    Dalena, B; Payet, J; Chancé, A; Brett, D R; Appleby, R B; De Maria, R; Giovannozzi, M

    2014-01-01

    The HL-LHC Upgrade project relies on large aperture magnets (mainly the inner Triplet and the separation dipole D1). The beam is much more sensitive to non-linear perturbations in this region, such as those induced by the fringe fields of the low-beta quadrupoles. Different tracking models are compared in order to provide a numerical estimate of the impact of fringe fields for the actual design of the inner triplet quadrupoles. The implementation of the fringe fields in SixTrack, to be used for dynamic apertures studies, is also discussed.

  6. Analysis of isoclinic fringes of a circular disk under diametric compression

    Jung, Girl; Park, Tae Geun; Yang, Min Bok; Kim, Myung Soo; Baek, Tae Hyun

    2005-01-01

    This paper presents the process for obtaining isoclinic fringes from experiment and compares the experimental results with theoretical calculations. In this experiment, the polaris cope named 'Stress master' is used as a primary tool, combined with a circular disk made of urethane rubber called as 'Photoflex' and a CCD camera to record the isoclinic fringes. In photoelasticity, isoclinics can be used to get the stress trajectories and then to analyze the whole field stresses. But it must be emphasized that isoclinic fringes are not themselves stress trajectories. In this paper, isoclinics are measured accurately by use of sharpening technique. Experimental results are comparable to those of theory.

  7. UNITI Bundesverband mittelstaendischer Mineraloelunternehmen e.V.. Annual report 2011/2012; UNITI Bundesverband mittelstaendischer Mineraloelunternehmen e.V.. Jahresbericht 2011/2012

    NONE

    2012-07-01

    The report presents the organisational structure and activities of the UNITI Bundesverband mittelstaendischer Mineraloelunternehmen e.V. (Berlin, Federal Republic of Germany). Above all, topical issues on business in the mineral oil and lubricant sector are discussed. There is an appendix containing data on the production and sales of petroleum products in the Federal Republic of Germany.

  8. The mystical Unity of Existence: A look at the philosophical interpretations of the mystics' view regarding The Unity vs. The plurality of existence

    Agha Husain Shiraz

    2017-01-01

    Full Text Available The Unity of Existence is a concept that was first proposed by mystics. However, this concept has been interpreted in different ways by different groups of scholars. This is due to the fact that these mystics did not always speak in an explicit manner. One of the groups that attempted to interpret this concept was the philosophers. An examination of the works of philosophers leads to the conclusion that there are at least 15 different philosophical interpretations of the Unity of Existence. Some of these interpret this concept epistemologically, while others interpret it metaphysically. Some of them are legitimate interpretations of the sayings of the mystics, while others contradict some of the other sayings of the mystics and, therefore, cannot serve as adequate explanations of this mystical concept. Nonetheless, they can still serve as independent interpretations of the unity vs. multiplicity of the Universe. In this article, the 15 different philosophical interpretations of the mystical unity of existence will be presented and the legitimacy of some of them will be assessed. Another discussion that is of primary importance is the truth or falsehood of these interpretations. This is something that cannot be addressed in this article and, yet, deserves to be examined independently.

  9. On court interpreters' visibility

    Dubslaff, Friedel; Martinsen, Bodil

    of the service they receive. Ultimately, the findings will be used for training purposes. Future - and, for that matter, already practising - interpreters as well as the professional users of interpreters ought to take the reality of the interpreters' work in practice into account when assessing the quality...... on the interpreter's interpersonal role and, in particular, on signs of the interpreter's visibility, i.e. active co-participation. At first sight, the interpreting assignment in question seems to be a short and simple routine task which would not require the interpreter to deviate from the traditional picture...

  10. Making Invisible Forces Visible

    Ratner, Helene Gad

    2013-01-01

    their 'true' attitudes and values. The paper draws on theories of affect as well as actor-network theory to analyse three incidents where managers turn their interpretations of teachers' emotions into such information. These incidents suggest that the efforts to render employees' attitudes and values visible...... install a normative emotional scale where an ideal employee displays emotional investment and self-control. This has implications, not only for employees who are expected to exhibit the 'right' emotions, but also for management, which comes to depend on transient emotions and co-presence in situations...

  11. Adaptive oriented PDEs filtering methods based on new controlling speed function for discontinuous optical fringe patterns

    Zhou, Qiuling; Tang, Chen; Li, Biyuan; Wang, Linlin; Lei, Zhenkun; Tang, Shuwei

    2018-01-01

    The filtering of discontinuous optical fringe patterns is a challenging problem faced in this area. This paper is concerned with oriented partial differential equations (OPDEs)-based image filtering methods for discontinuous optical fringe patterns. We redefine a new controlling speed function to depend on the orientation coherence. The orientation coherence can be used to distinguish the continuous regions and the discontinuous regions, and can be calculated by utilizing fringe orientation. We introduce the new controlling speed function to the previous OPDEs and propose adaptive OPDEs filtering models. According to our proposed adaptive OPDEs filtering models, the filtering in the continuous and discontinuous regions can be selectively carried out. We demonstrate the performance of the proposed adaptive OPDEs via application to the simulated and experimental fringe patterns, and compare our methods with the previous OPDEs.

  12. From Payday Loans To Pawnshops: Fringe Banking, The Unbanked, And Health.

    Eisenberg-Guyot, Jerzy; Firth, Caislin; Klawitter, Marieka; Hajat, Anjum

    2018-03-01

    The fringe banking industry, including payday lenders and check cashers, was nearly nonexistent three decades ago. Today it generates tens of billions of dollars in annual revenue. The industry's growth accelerated in the 1980s with financial deregulation and the working class's declining resources. With Current Population Survey data, we used propensity score matching to investigate the relationship between fringe loan use, unbanked status, and self-rated health, hypothesizing that the material and stress effects of exposure to these financial services would be harmful to health. We found that fringe loan use was associated with 38 percent higher prevalence of poor or fair health, while being unbanked (not having one's own bank account) was associated with 17 percent higher prevalence. Although a variety of policies could mitigate the health consequences of these exposures, expanding social welfare programs and labor protections would address the root causes of the use of fringe services and advance health equity.

  13. Color Fringe Correction by the Color Difference Prediction Using the Logistic Function.

    Jang, Dong-Won; Park, Rae-Hong

    2017-05-01

    This paper proposes a new color fringe correction method that preserves the object color well by the color difference prediction using the logistic function. We observe two characteristics between normal edge (NE) and degraded edge (DE) due to color fringe: 1) the DE has relatively smaller R-G and B-G correlations than the NE and 2) the color difference in the NE can be fitted by the logistic function. The proposed method adjusts the color difference of the DE to the logistic function by maximizing the R-G and B-G correlations in the corrected color fringe image. The generalized logistic function with four parameters requires a high computational load to select the optimal parameters. In experiments, a one-parameter optimization can correct color fringe gracefully with a reduced computational load. Experimental results show that the proposed method restores well the original object color in the DE, whereas existing methods give monochromatic or distorted color.

  14. Effect of quadrupole fringe fields on the tune of Indus-2

    Kant, Pradeep; Husain, Riyasat; Ghodke, A.D.; Singh, Gurnam

    2009-01-01

    Being an unavoidable part in a real magnet design, fringe fields of different kind of magnets have various effects on the beam parameters of the storage ring. The fringe field of a bending magnet (dipole) generates closed orbit distortion and disturbs the dispersion function whereas the fringe field of a quadrupole affects other parameters of the ring like tune values and twiss functions. The fringe field pattern of the quadrupoles of Indus-2 was measured by the Magnet Group. The measurements were performed along the various radial tracks in a quadrupole from -30 to 30 mm in steps of 5 mm at various excitation current levels. The pattern of the gradient at these different current levels was obtained by a line fit of the magnetic field at each point. The data was used to get the effect on the tune of Indus-2. The paper describes the results of the effect on the tune. (author)

  15. APPLICATION OF THE NATURALLY-OCCURRING DEUTERIUM ISOTOPE TO TRACING THE CAPILLARY FRINGE

    Naturally-occurring deuterium is a useful tracer of subsurface hydrologic processes. A possible application includes the identification of capillary fringes in the vadose zone. Multiple and discontinuous water tables persist in many temperate regions, under various hydrogeologi...

  16. The linkage between car-related fringe benefits and the travel behavior of knowledge workers

    Bendit, Eduard; Frenkel, Amnon; Kaplan, Sigal

    2011-01-01

    This study focuses on the linkage between car-related fringe benefits and the travel behavior of knowledge workers in commute and leisure trips. Specifically, this study compares the commuting and leisure travel behavior of knowledge workers who receive either a company-car or car allowance...... with the travel behavior of workers who do not receive car-related fringe benefits. Data are based on a revealed-preferences survey among knowledge workers in Israel. Results show that car-related fringe benefits are associated with (i) high car ownership and car use intensity, (ii) long commute distances...... and travel times and non-sustainable transport modes, and (iii) high frequency of long-distance leisure trips. Policy implications include (i) directing policies towards reducing car ownership induced by car-related fringe benefits, (ii) encouraging company-car holders to ‘pay their way’, and (iii...

  17. A low-cost and portable realization on fringe projection three-dimensional measurement

    Xiao, Suzhi; Tao, Wei; Zhao, Hui

    2015-12-01

    Fringe projection three-dimensional measurement is widely applied in a wide range of industrial application. The traditional fringe projection system has the disadvantages of high expense, big size, and complicated calibration requirements. In this paper we introduce a low-cost and portable realization on three-dimensional measurement with Pico projector. It has the advantages of low cost, compact physical size, and flexible configuration. For the proposed fringe projection system, there is no restriction to camera and projector's relative alignment on parallelism and perpendicularity for installation. Moreover, plane-based calibration method is adopted in this paper that avoids critical requirements on calibration system such as additional gauge block or precise linear z stage. What is more, error sources existing in the proposed system are introduced in this paper. The experimental results demonstrate the feasibility of the proposed low cost and portable fringe projection system.

  18. Analysis of moiré fringes by Wiener filtering: An extension to the Fourier method

    Harasse, Sébastien; Yashiro, Wataru; Momose, Atsushi

    2012-01-01

    In X-ray Talbot interferometry, tilting the phase grating with respect to the absorption grating results in the formation of spatial fringes. The analysis of this moiré pattern, classically performed by the Fourier method, allows the extraction of the sample phase shift information from a single image. In this context, an extension to the Fourier method is proposed. The filter used to extract the fringe information is chosen optimally in the least-squares sense, given models for the zeroth and first order modes, noise and the modulation transfer function. The latter is obtained by measuring the detector response to moiré fringes with increasing frequencies. The obtained Wiener filter allows a better reconstruction of the phase information at all fringe frequencies, compared to the usual box or gaussian filters. This is demonstrated quantitatively by experiments using synchrotron radiation.

  19. Nitrogen dynamics in subtropical fringe and basin mangrove forests inferred from stable isotopes.

    Reis, Carla Roberta Gonçalves; Nardoto, Gabriela Bielefeld; Rochelle, André Luis Casarin; Vieira, Simone Aparecida; Oliveira, Rafael Silva

    2017-03-01

    Mangroves exhibit low species richness compared to other tropical forests, but great structural and functional diversity. Aiming to contribute to a better understanding of the functioning of mangrove forests, we investigated nitrogen (N) dynamics in two physiographic types of mangroves (fringe and basin forests) in southeastern Brazil. Because fringe forests are under great influence of tidal flushing we hypothesized that these forests would exhibit higher N cycling rates in sediment and higher N losses to the atmosphere compared to basin forests. We quantified net N mineralization and nitrification rates in sediment and natural abundance of N stable isotopes (δ 15 N) in the sediment-plant-litter system. The fringe forest exhibited higher net N mineralization rates and δ 15 N in the sediment-plant-litter system, but net nitrification rates were similar to those of the basin forest. The results of the present study suggest that fringe forests exhibit higher N availability and N cycling in sediment compared to basin forests.

  20. Theoretical fringe profiles with crossed Babinet compensators in testing concave aspheric surfaces.

    Saxena, A K; Lancelot, J P

    1982-11-15

    This paper presents the theory for the use of crossed Babinet compensators in testing concave aspheric surfaces. Theoretical fringe profiles for a sphere and for an aspheric surface with primary aberration are shown. Advantages of this method are discussed.

  1. The diversity and unity of reactor noise theory

    Kuang, Zhifeng

    2001-01-01

    The study of reactor noise theory concerns questions about cause and effect relationships, and the utilisation of random noise in nuclear reactor systems. The diversity of reactor noise theory arises from the variety of noise sources, the various mathematical treatments applied and the various practical purposes. The neutron noise in zero-energy systems arises from the fluctuations in the number of neutrons per fission, the time between nuclear events, and the type of reactions. It can be used to evaluate system parameters. The mathematical treatment is based on the master equation of stochastic branching processes. The noise in power reactor systems is given rise by random processes of technological origin such as vibration of mechanical parts, boiling of the coolant, fluctuations of temperature and pressure. It can be used to monitor the reactor behaviour with the possibility of detecting malfunctions at an early stage. The mathematical treatment is based on the Langevin equation. The unity of reactor noise theory arises from the fact that the useful information from noise is embedded in the second moments of random variables, which lends the possibility of building up a unified mathematical description and analysis of the various reactor noise sources. Exploring such possibilities is the main subject among the three major topics reported in this thesis. The first subject is within the zero power noise in steady media, and we reported on the extension of the existing theory to more general cases. In Paper I, by use of the master equation approach, we have derived the most general Feynman- and Rossi-alpha formulae so far by taking the full joint statistics of the prompt and all the six groups of delayed neutron precursors, and a multiple emission source into account. The involved problems are solved with a combination of effective analytical techniques and symbolic algebra codes. Paper II gives a numerical evaluation of these formulae. An assessment of the

  2. Comment on "Fringe projection profilometry with nonparallel illumination: a least-squares approach"

    Wang, Zhaoyang; Bi, Hongbo

    2006-07-01

    We comment on the recent Letter by Chen and Quan [Opt. Lett.30, 2101 (2005)] in which a least-squares approach was proposed to cope with the nonparallel illumination in fringe projection profilometry. It is noted that the previous mathematical derivations of the fringe pitch and carrier phase functions on the reference plane were incorrect. In addition, we suggest that the variation of carrier phase along the vertical direction should be considered.

  3. Fringing field optimization of hemispherical deflector analyzers using BEM and FDM

    Sise, Omer, E-mail: omersise@aku.edu.t [Department of Physics, Science and Arts Faculty, Afyon Kocatepe University, 03200 Afyonkarahisar (Turkey); Ulu, Melike; Dogan, Mevlut [Department of Physics, Science and Arts Faculty, Afyon Kocatepe University, 03200 Afyonkarahisar (Turkey); Martinez, Genoveva [Department Fisica Aplicada III, Fac. de Fisica, UCM 28040-Madrid (Spain); Zouros, Theo J.M. [Department of Physics, University of Crete, P.O. Box 2208, 71003 Heraklion, Crete (Greece); TANDEM Accelerator Laboratory, Institute of Nuclear Physics, NCSR ' Demokritos' , 153.10 Aghia Paraskevi, Athens (Greece)

    2010-02-15

    In this paper we present numerical modeling results for fringing field optimization of hemispherical deflector analyzers (HDAs), simulated using boundary-element and finite-difference numerical methods. Optimization of the fringing field aberrations of HDAs is performed by using a biased optical axis and an optimized entry position offset (paracentric) from the center position used in conventional HDAs. The described optimization achieves first-order focusing thus also further improving the energy resolution of HDAs.

  4. Controlling Fringe Sensitivity of Electro-Optic Holography Systems Using Laser Diode Current Modulation

    Bybee, Shannon J.

    2001-01-01

    Electro-Optic Holography (EOH) is a non-intrusive, laser-based, displacement measurement technique capable of static and dynamic displacement measurements. EOH is an optical interference technique in which fringe patterns that represent displacement contour maps are generated. At excessively large displacements the fringe density may be so great that individual fringes are not resolvable using typical EOH techniques. This thesis focuses on the development and implementation of a method for controlling the sensitivity of the EOH system. This method is known as Frequency Translated Electro-Optic Holography (FTEOH). It was determined that by modulating the current source of the laser diode at integer multiples of the object vibration, the fringe pattern is governed by higher order Bessel function of the first kind and the number of fringes that represent a given displacement can be controlled. The reduction of fringes is theoretically unlimited but physically limited by the frequency bandwidth of the signal generator, providing modulation to the laser diode. Although this research technique has been verified theoretically and experimentally in this thesis, due to the current laser diode capabilities it is a tedious and time consuming process to acquire data using the FTEOH technique.

  5. Adaptive digital fringe projection technique for high dynamic range three-dimensional shape measurement.

    Lin, Hui; Gao, Jian; Mei, Qing; He, Yunbo; Liu, Junxiu; Wang, Xingjin

    2016-04-04

    It is a challenge for any optical method to measure objects with a large range of reflectivity variation across the surface. Image saturation results in incorrect intensities in captured fringe pattern images, leading to phase and measurement errors. This paper presents a new adaptive digital fringe projection technique which avoids image saturation and has a high signal to noise ratio (SNR) in the three-dimensional (3-D) shape measurement of objects that has a large range of reflectivity variation across the surface. Compared to previous high dynamic range 3-D scan methods using many exposures and fringe pattern projections, which consumes a lot of time, the proposed technique uses only two preliminary steps of fringe pattern projection and image capture to generate the adapted fringe patterns, by adaptively adjusting the pixel-wise intensity of the projected fringe patterns based on the saturated pixels in the captured images of the surface being measured. For the bright regions due to high surface reflectivity and high illumination by the ambient light and surfaces interreflections, the projected intensity is reduced just to be low enough to avoid image saturation. Simultaneously, the maximum intensity of 255 is used for those dark regions with low surface reflectivity to maintain high SNR. Our experiments demonstrate that the proposed technique can achieve higher 3-D measurement accuracy across a surface with a large range of reflectivity variation.

  6. Reentering the Gravitational Fringe Field of the Solar System

    Fisher, P. C.

    A 1998 proposal to the National Aeronautics and Space Administration (NASA) described how to update an earlier proposal outline for an experiment involving a manned spacecraft that traveled to just outside the gravitational field of the solar system. The recent proposal briefly describes how to initiate a 25-year program to launch a seven-year mission. Very little thought has been given to astronomical/astrophysical investigations that might be carried out over seven years, but one or more generations of NASA's Terrestrial Planet Finder program might be included. Only a little serious thought has been given to how to reenter the solar system's gravitational fringe field, but access to several procedures and three-fold redundancy seems desirable. Some details of the proposed paper study will be given. Non-responsibility statement, from source document of calendar 1973. This document was prepared while the author was on an unpaid leave of absence from The Lockheed Missiles and Space Company (LMSC) of Palo Alto, California. The comments made herein are partly the results of experiments carried out over a number of years. For a portion of this time, both NASA and LMSC financed the author's space astronomy investigations. It may be that either or both these institutions may possess some proprietary rights to portions of the ideas and information presented. This work was supported by Ruffner Associates, Inc.

  7. Visible but Unseen?

    Torkilsheyggi, Arnvør Martinsdóttir á; Hertzum, Morten

    2015-01-01

    Studies have shown that whiteboards support much cooper-ative work by for example strengthening awareness, im-proving communication, and reducing mental workload. In line with these predominantly positive findings, an emer-gency department (ED) turned to its whiteboard to improve the coordination...... of its work with blood tests. We investi-gate this use of the whiteboard through observations and informal interviews in the ED and analyze the ability of the whiteboard to support coordination and awareness in the work with blood tests. Our findings show limitations in the ability of the whiteboard...... to support awareness in a setting where the users are (locally) mobile, specifically in regard to information that requires continuous monitoring. We do however also find that the whiteboard safeguarded the work with blood tests against some risks by making blood-test information socially visible....

  8. 2D and 3D virtual interactive laboratories of physics on Unity platform

    González, J. D.; Escobar, J. H.; Sánchez, H.; De la Hoz, J.; Beltrán, J. R.

    2017-12-01

    Using the cross-platform game engine Unity, we develop virtual laboratories for PC, consoles, mobile devices and website as an innovative tool to study physics. There is extensive uptake of ICT in the teaching of science and its impact on the learning, and considering the limited availability of laboratories for physics teaching and the difficulties this causes in the learning of school students, we design the virtual laboratories to enhance studentâĂŹs knowledge of concepts in physics. To achieve this goal, we use Unity due to provide support bump mapping, reflection mapping, parallax mapping, dynamics shadows using shadows maps, full-screen post-processing effects and render-to-texture. Unity can use the best variant for the current video hardware and, if none are compatible, to use an alternative shader that may sacrifice features for performance. The control over delivery to mobile devices, web browsers, consoles and desktops is the main reason Unity is the best option among the same kind cross-platform. Supported platforms include Android, Apple TV, Linux, iOS, Nintendo 3DS line, macOS, PlayStation 4, Windows Phone 8, Wii but also an asset server and Nvidia’s PhysX physics engine which is the most relevant tool on Unity for our PhysLab.

  9. VLTI First Fringes with Two Auxiliary Telescopes at Paranal

    2005-03-01

    World's Largest Interferometer with Moving Optical Telescopes on Track Summary The Very Large Telescope Interferometer (VLTI) at Paranal Observatory has just seen another extension of its already impressive capabilities by combining interferometrically the light from two relocatable 1.8-m Auxiliary Telescopes. Following the installation of the first Auxiliary Telescope (AT) in January 2004 (see ESO PR 01/04), the second AT arrived at the VLT platform by the end of 2004. Shortly thereafter, during the night of February 2 to 3, 2005, the two high-tech telescopes teamed up and quickly succeeded in performing interferometric observations. This achievement heralds an era of new scientific discoveries. Both Auxiliary Telescopes will be offered from October 1, 2005 to the community of astronomers for routine observations, together with the MIDI instrument. By the end of 2006, Paranal will be home to four operational ATs that may be placed at 30 different positions and thus be combined in a very large number of ways ("baselines"). This will enable the VLTI to operate with enormous flexibility and, in particular, to obtain extremely detailed (sharp) images of celestial objects - ultimately with a resolution that corresponds to detecting an astronaut on the Moon. PR Photo 07a/05: Paranal Observing Platform with AT1 and AT2 PR Photo 07b/05: AT1 and AT2 with Open Domes PR Photo 07c/05: Evening at Paranal with AT1 and AT2 PR Photo 07d/05: AT1 and AT2 under the Southern Sky PR Photo 07e/05: First Fringes with AT1 and AT2 PR Video Clip 01/05: Two ATs at Paranal (Extract from ESO Newsreel 15) A Most Advanced Device ESO PR Video 01/05 ESO PR Video 01/05 Two Auxiliary Telescopes at Paranal [QuickTime: 160 x 120 pix - 37Mb - 4:30 min] [QuickTime: 320 x 240 pix - 64Mb - 4:30 min] ESO PR Photo 07a/05 ESO PR Photo 07a/05 [Preview - JPEG: 493 x400 pix - 44k] [Normal - JPEG: 985 x 800 pix - 727k] [HiRes - JPEG: 5000 x 4060 pix - 13.8M] Captions: ESO PR Video Clip 01/05 is an extract from

  10. Organic unity theory: an integrative mind-body theory for psychiatry.

    Goodman, A

    1997-12-01

    The potential of psychiatry as an integrative science has been impeded by an internal schism that derives from the duality of mental and physical. Organic unity theory is proposed as a conceptual framework that brings together the terms of the mind-body duality in one coherent perspective. Organic unity theory is braided of three strands: identity, which describes the relationship between mentally described events and corresponding physically described events; continuity, which describes the linguistic-conceptual system that contains both mental and physical terms; and dialectic, which describes the relationship between the empirical way of knowing that is associated with the physical domain of the linguistic-conceptual system and the hermeneutic way of knowing that is associated with the mental domain. Each strand represents an integrative formulation that resolves an aspect of mental-physical dualism into an underlying unity. After the theory is presented, its implications for psychiatry are briefly considered.

  11. Does John 17:11b, 21−23 refer to church unity?

    Gert J. Malan

    2011-04-01

    Full Text Available In ecumenical circles, John 17:11b, 21–23 has been understood as Jesus’ prayer for church unity, be it confessional or structural. This article questioned such readings and conclusions from historical, literary and sosio-cultural viewpoints. The Fourth Gospel’s language is identified as ’antilanguage’ typical of an ’antisociety’, like that of the Hermetic, Mandean and Qumran sects. Such a society is a separate entity within society at large, but opposes it. Read as a text of an antisociety, John 17:11b, 21–23 legitimises the unity of the separatist Johannine community, which could have comprised several such communities. This community opposed the Judean religion, Gnosticism, the followers of John the Baptist and three major groups in early Christianity. As text from the canon, this Johannine text legitimates tolerance of diversity rather than the confessional or structural unity of the church.

  12. Three-dimensional trace measurements for fast-moving objects using binary-encoded fringe projection techniques.

    Su, Wei-Hung; Kuo, Cho-Yo; Kao, Fu-Jen

    2014-08-20

    A fringe projection technique to trace the shape of a fast-moving object is proposed. A binary-encoded fringe pattern is illuminated by a strobe lamp and then projected onto the moving object at a sequence of time. Phases of the projected fringes obtained from the sequent measurements are extracted by the Fourier transform method. Unwrapping is then performed with reference to the binary-encoded fringe pattern. Even though the inspected object is colorful, fringe orders can be identified. A stream of profiles is therefore retrieved from the sequent unwrapped phases. This makes it possible to analyze physical properties of the dynamic objects. Advantages of the binary-encoded fringe pattern for phase unwrapping also include (1) reliable performance for colorful objects, spatially isolated objects, and surfaces with large depth discontinuities; (2) unwrapped errors only confined in a local area; and (3) low computation cost.

  13. Development of a phase counter with real-time fringe jump corrector for heterodyne interferometer on LHD

    Ito, Y.; Tanaka, K.; Tokuzawa, T.; Akiyama, T.; Okajima, S.; Kawahata, K.

    2005-01-01

    Phase counters, which are used with heterodyne interferometers for plasma density measurements, frequently suffer from phase jumping and cause difficulties for data interpretation. An automatic fringe jump corrector (AFJC) circuit has been developed to compensate for fringe jumps. The AFJC can correct phase jumps automatically in real-time. The AFJC, which is integrated on one chip, is installed on the presently working phase counter circuit. As for the specification of this phase counter the intermediate beat signal is 1 MHz, the phase detection range is 31 fringes with phase resolution of 1/80 of a fringe and the response time of 10 μs. The circuit has been tested on the far infrared (FIR) laser interferometer on LHD. The AFJC works fine to correct fringe jumps, when fringe jumps occurred due to the strong density gradient produced by the hydrogen pellet injection

  14. FFT swept filtering: a bias-free method for processing fringe signals in absolute gravimeters

    Křen, Petr; Pálinkáš, Vojtech; Mašika, Pavel; Val'ko, Miloš

    2018-05-01

    Absolute gravimeters, based on laser interferometry, are widely used for many applications in geoscience and metrology. Although currently the most accurate FG5 and FG5X gravimeters declare standard uncertainties at the level of 2-3 μGal, their inherent systematic errors affect the gravity reference determined by international key comparisons based predominately on the use of FG5-type instruments. The measurement results for FG5-215 and FG5X-251 clearly showed that the measured g-values depend on the size of the fringe signal and that this effect might be approximated by a linear regression with a slope of up to 0.030 μGal/mV . However, these empirical results do not enable one to identify the source of the effect or to determine a reasonable reference fringe level for correcting g-values in an absolute sense. Therefore, both gravimeters were equipped with new measuring systems (according to Křen et al. in Metrologia 53:27-40, 2016. https://doi.org/10.1088/0026-1394/53/1/27 applied for FG5), running in parallel with the original systems. The new systems use an analogue-to-digital converter HS5 to digitize the fringe signal and a new method of fringe signal analysis based on FFT swept bandpass filtering. We demonstrate that the source of the fringe size effect is connected to a distortion of the fringe signal due to the electronic components used in the FG5(X) gravimeters. To obtain a bias-free g-value, the FFT swept method should be applied for the determination of zero-crossings. A comparison of g-values obtained from the new and the original systems clearly shows that the original system might be biased by approximately 3-5 μGal due to improperly distorted fringe signal processing.

  15. How culture shapes community: bible belief, theological unity, and a sense of belonging in religious congregations.

    Stroope, Samuel

    2011-01-01

    Feeling that you belong in a group is an important and powerful need. The ability to foster a sense of belonging can also determine whether groups survive. Organizational features of groups cultivate feelings of belonging, yet prior research fails to investigate the idea that belief systems also play a major role. Using multilevel data, this study finds that church members' traditional beliefs, group-level belief unity, and their interaction associate positively with members' sense of belonging. In fact, belief unity can be thought of as a “sacred canopy” under which the relationship between traditional beliefs and feelings of belonging thrives.

  16. Empat Prinsip Komposisi Menciptakan Desain Indah, Satu Trik Pemikat Hati Pemirsa: Rhythm, Depth, Balance, Unity - Emphasis

    Julianto Julianto

    2011-10-01

    Full Text Available Rhytm, depth, balance, unity are 4 main visual composition principles which are abbreviated and simple. The design principles made it easier to design beautiful visual communication but still reflecting strong effects for audience in extracting one trick of desain principles: emphasis. The article adapts literature study method from 7 popular books about visual design communication, along with information beneath each book. The analysis consists of descripted important parts in design principles, then summarize them into 4 (rhythm, depth, balance, unity plus 1 (emphasis. The article hopefully could facilitate lecturers and students in learning process in DKV classes.  

  17. Investigation of relation between motivation of success and team unity of sportsmen

    Fikret Soyer; Yusuf Can; Hacer Güven; Gülten Hergüner; Mehmet Bayansalduz; Burcu Tetik

    2010-01-01

    The aim of the research is to investigate the relation between motivation of success and team unity of the sportsmen.120 sportsmen at the age of 13-34 from Kayseri and Mersin joined to this research willingly. The scale of Willis Motivation of Success Unique to Sports and Inventary of Team Unity adopted to Turkish population by the Süleyman Moralı were carried out to the enquetees.As a consequence of the correlation analysis, a positive relation at 0,05 degree was obtained between team u...

  18. Evaluating multiple polylogarithm values at sixth roots of unity up to weight six

    Henn, J. M.; Smirnov, A. V.; Smirnov, V. A.

    2017-06-01

    We evaluate multiple polylogarithm values at sixth roots of unity up to weight six, i.e. of the form G (a1 , … ,aw ; 1) where the indices ai are equal to zero or a sixth root of unity, with a1 ≠ 1. For w ≤ 6, we construct bases of the linear spaces generated by the real and imaginary parts of G (a1 , … ,aw ; 1) and obtain a table for expressing them as linear combinations of the elements of the bases.

  19. Image decomposition model Shearlet-Hilbert-L2 with better performance for denoising in ESPI fringe patterns.

    Xu, Wenjun; Tang, Chen; Su, Yonggang; Li, Biyuan; Lei, Zhenkun

    2018-02-01

    In this paper, we propose an image decomposition model Shearlet-Hilbert-L 2 with better performance for denoising in electronic speckle pattern interferometry (ESPI) fringe patterns. In our model, the low-density fringes, high-density fringes, and noise are, respectively, described by shearlet smoothness spaces, adaptive Hilbert space, and L 2 space and processed individually. Because the shearlet transform has superior directional sensitivity, our proposed Shearlet-Hilbert-L 2 model achieves commendable filtering results for various types of ESPI fringe patterns, including uniform density fringe patterns, moderately variable density fringe patterns, and greatly variable density fringe patterns. We evaluate the performance of our proposed Shearlet-Hilbert-L 2 model via application to two computer-simulated and nine experimentally obtained ESPI fringe patterns with various densities and poor quality. Furthermore, we compare our proposed model with windowed Fourier filtering and coherence-enhancing diffusion, both of which are the state-of-the-art methods for ESPI fringe patterns denoising in transform domain and spatial domain, respectively. We also compare our proposed model with the previous image decomposition model BL-Hilbert-L 2 .

  20. Material Stress Fringe Constant Measurement of Specimen under Pure Bending Load by Use of Photoelastic Phase Shifting Method

    Liu, Guan Yong; Kim, Myung Soo; Baek, Tae Hyun

    2014-01-01

    In a photoelastic experiment, it is necessary to know the material stress fringe constant of the photoelastic specimen to determine the stresses from the measured isochromatic fringe orders. The material stress fringe constant can be obtained using a simple tension specimen and/or a circular disk under diametric compression. In these methods, there is generally a need to apply numerous loads to the specimen in response to the relationship of the fringe order. Then, the least squares method is used to obtain the material constant. In this paper, the fringe orders that appear on a four-point bending specimen are used to determine the fringe constant. This method requires four photoelastic fringes obtained from a circular polariscope by rotating the analyzer to 0, π/4, π/2, and 3π/4 radians. Using the four-point bending specimen to determine the material stress fringe constant has an advantage because measurements can be made at different locations by applying a constant load. The stress fringe constant measured with this method is within the range suggested by the manufacturer of the photoelastic material

  1. Second-order oriented partial-differential equations for denoising in electronic-speckle-pattern interferometry fringes.

    Tang, Chen; Han, Lin; Ren, Hongwei; Zhou, Dongjian; Chang, Yiming; Wang, Xiaohang; Cui, Xiaolong

    2008-10-01

    We derive the second-order oriented partial-differential equations (PDEs) for denoising in electronic-speckle-pattern interferometry fringe patterns from two points of view. The first is based on variational methods, and the second is based on controlling diffusion direction. Our oriented PDE models make the diffusion along only the fringe orientation. The main advantage of our filtering method, based on oriented PDE models, is that it is very easy to implement compared with the published filtering methods along the fringe orientation. We demonstrate the performance of our oriented PDE models via application to two computer-simulated and experimentally obtained speckle fringes and compare with related PDE models.

  2. DLP-based 3D metrology by structured light or projected fringe technology for life sciences and industrial metrology

    Frankowski, G.; Hainich, R.

    2009-02-01

    Since the mid-eighties, a fundamental idea for achieving measuring accuracy in projected fringe technology was to consider the projected fringe pattern as an interferogram and evaluate it on the basis of advanced algorithms widely used for phase measuring in real-time interferometry. A fundamental requirement for obtaining a sufficiently high degree of measuring accuracy with this so-called "phase measuring projected fringe technology" is that the projected fringes, analogous to interference fringes, must have a cos2-shaped intensity distribution. Until the mid-nineties, this requirement for the projected fringe pattern measurement technology presented a basic handicap for its wide application in 3D metrology. This situation changed abruptly, when in the nineties Texas Instruments introduced to the market advanced digital light projection on the basis of micro mirror based projection systems, socalled DLP technology, which also facilitated the generation and projection of cos2-shaped intensity and/or fringe patterns. With this DLP technology, which from its original approach was actually oriented towards completely different applications such as multimedia projection, Texas Instruments boosted phase-measuring fringe projection in optical 3D metrology to a worldwide breakthrough both for medical as well as industrial applications. A subject matter of the lecture will be to present the fundamental principles and the resulting advantages of optical 3D metrology based on phase-measuring fringe projection using DLP technology. Further will be presented and discussed applications of the measurement technology in medical engineering and industrial metrology.

  3. Hakim Mudarres Zunuzi and Banu Amin on the Unity of Essence A Comparative Study

    Maryamsaday Eizadi

    2013-12-01

    Full Text Available Tawhid (the belief in transcendent oneness or unity of divinity is the culmination of all Islamic teachings and has a special place in Islamic sciences. The unity of essence begins by the unity of existential necessity and ends in unity of existence as many theosophers and mystics suggest. This essay discusses unity of essence as understood by two Sadraean thinkers (Hakim Mudarres Zunuzi and Banu Amin according to Mulla Sadra's principles. Undoubtedly, these two theosophers have no discord as far as they speak about necessity of existence and unity of Necessary Existence. Dispute erupts when Banu voices her Sadraean sympathy with transcendent oneness of existence while Mudarres takes another position.       According to Sadra, the being which has no limitation whatsoever leaves no room for other being to come into existence and be its second or third and thus it is unique and uncountable. In this world, thus, there is no existence but one of which the rest are manifestations (Mulla Sadra, 1382, 67. This view which has been mentioned by Sadra in different positions is the very idea of individual unity of existence. It needs to be explained that in Mulla Sadra's works there are two accounts of effect: Existence in itself for something-else (relational existence Existence for something-else (copulative existence      At first sight which is thought to be elementary as compared to the second one, effect enjoys a reality and existence of its own the whole identity of which is though being related to and depended on cause and this dependency is its very essence and undetachable but the effect like the cause is counted among  beings. This is the position which is also held by Mudarres Zunuzi as to contingent beings (Mudarres Zunuzi, 1376: 357. He seem to have understood Mulla Sadra's words implying this very sense alone without presuming the possibility of a second sense. To put it otherwise, he has indeed fathomed effect's copulative

  4. Revisiting visibility in the plane

    Wilkinson, Bryan Thomas

    Abstract We consider two closely related problems: computing the region visible from a point amid simple polygonal obstacles and computing the lower envelope of a set of disjoint segments. Visibility problems such as these were proposed and promptly solved in the late'80s and early'90s before...

  5. Robust and efficient multi-frequency temporal phase unwrapping: optimal fringe frequency and pattern sequence selection.

    Zhang, Minliang; Chen, Qian; Tao, Tianyang; Feng, Shijie; Hu, Yan; Li, Hui; Zuo, Chao

    2017-08-21

    Temporal phase unwrapping (TPU) is an essential algorithm in fringe projection profilometry (FPP), especially when measuring complex objects with discontinuities and isolated surfaces. Among others, the multi-frequency TPU has been proven to be the most reliable algorithm in the presence of noise. For a practical FPP system, in order to achieve an accurate, efficient, and reliable measurement, one needs to make wise choices about three key experimental parameters: the highest fringe frequency, the phase-shifting steps, and the fringe pattern sequence. However, there was very little research on how to optimize these parameters quantitatively, especially considering all three aspects from a theoretical and analytical perspective simultaneously. In this work, we propose a new scheme to determine simultaneously the optimal fringe frequency, phase-shifting steps and pattern sequence under multi-frequency TPU, robustly achieving high accuracy measurement by a minimum number of fringe frames. Firstly, noise models regarding phase-shifting algorithms as well as 3-D coordinates are established under a projector defocusing condition, which leads to the optimal highest fringe frequency for a FPP system. Then, a new concept termed frequency-to-frame ratio (FFR) that evaluates the magnitude of the contribution of each frame for TPU is defined, on which an optimal phase-shifting combination scheme is proposed. Finally, a judgment criterion is established, which can be used to judge whether the ratio between adjacent fringe frequencies is conducive to stably and efficiently unwrapping the phase. The proposed method provides a simple and effective theoretical framework to improve the accuracy, efficiency, and robustness of a practical FPP system in actual measurement conditions. The correctness of the derived models as well as the validity of the proposed schemes have been verified through extensive simulations and experiments. Based on a normal monocular 3-D FPP hardware system

  6. Simplified paraboloid phase model-based phase tracker for demodulation of a single complex fringe.

    He, A; Deepan, B; Quan, C

    2017-09-01

    A regularized phase tracker (RPT) is an effective method for demodulation of single closed-fringe patterns. However, lengthy calculation time, specially designed scanning strategy, and sign-ambiguity problems caused by noise and saddle points reduce its effectiveness, especially for demodulating large and complex fringe patterns. In this paper, a simplified paraboloid phase model-based regularized phase tracker (SPRPT) is proposed. In SPRPT, first and second phase derivatives are pre-determined by the density-direction-combined method and discrete higher-order demodulation algorithm, respectively. Hence, cost function is effectively simplified to reduce the computation time significantly. Moreover, pre-determined phase derivatives improve the robustness of the demodulation of closed, complex fringe patterns. Thus, no specifically designed scanning strategy is needed; nevertheless, it is robust against the sign-ambiguity problem. The paraboloid phase model also assures better accuracy and robustness against noise. Both the simulated and experimental fringe patterns (obtained using electronic speckle pattern interferometry) are used to validate the proposed method, and a comparison of the proposed method with existing RPT methods is carried out. The simulation results show that the proposed method has achieved the highest accuracy with less computational time. The experimental result proves the robustness and the accuracy of the proposed method for demodulation of noisy fringe patterns and its feasibility for static and dynamic applications.

  7. 3D fingerprint imaging system based on full-field fringe projection profilometry

    Huang, Shujun; Zhang, Zonghua; Zhao, Yan; Dai, Jie; Chen, Chao; Xu, Yongjia; Zhang, E.; Xie, Lili

    2014-01-01

    As an unique, unchangeable and easily acquired biometrics, fingerprint has been widely studied in academics and applied in many fields over the years. The traditional fingerprint recognition methods are based on the obtained 2D feature of fingerprint. However, fingerprint is a 3D biological characteristic. The mapping from 3D to 2D loses 1D information and causes nonlinear distortion of the captured fingerprint. Therefore, it is becoming more and more important to obtain 3D fingerprint information for recognition. In this paper, a novel 3D fingerprint imaging system is presented based on fringe projection technique to obtain 3D features and the corresponding color texture information. A series of color sinusoidal fringe patterns with optimum three-fringe numbers are projected onto a finger surface. From another viewpoint, the fringe patterns are deformed by the finger surface and captured by a CCD camera. 3D shape data of the finger can be obtained from the captured fringe pattern images. This paper studies the prototype of the 3D fingerprint imaging system, including principle of 3D fingerprint acquisition, hardware design of the 3D imaging system, 3D calibration of the system, and software development. Some experiments are carried out by acquiring several 3D fingerprint data. The experimental results demonstrate the feasibility of the proposed 3D fingerprint imaging system.

  8. Marker encoded fringe projection profilometry for efficient 3D model acquisition.

    Budianto, B; Lun, P K D; Hsung, Tai-Chiu

    2014-11-01

    This paper presents a novel marker encoded fringe projection profilometry (FPP) scheme for efficient 3-dimensional (3D) model acquisition. Traditional FPP schemes can introduce large errors to the reconstructed 3D model when the target object has an abruptly changing height profile. For the proposed scheme, markers are encoded in the projected fringe pattern to resolve the ambiguities in the fringe images due to that problem. Using the analytic complex wavelet transform, the marker cue information can be extracted from the fringe image, and is used to restore the order of the fringes. A series of simulations and experiments have been carried out to verify the proposed scheme. They show that the proposed method can greatly improve the accuracy over the traditional FPP schemes when reconstructing the 3D model of objects with abruptly changing height profile. Since the scheme works directly in our recently proposed complex wavelet FPP framework, it enjoys the same properties that it can be used in real time applications for color objects.

  9. Stitching interferometry of high numerical aperture cylindrical optics without using a fringe-nulling routine.

    Peng, Junzheng; Wang, Qingquan; Peng, Xiang; Yu, Yingjie

    2015-11-01

    Stitching interferometry is a common method for measuring the figure error of high numerical aperture optics. However, subaperture measurement usually requires a fringe-nulling routine, thus making the stitching procedure complex and time-consuming. The challenge when measuring a surface without a fringe-nulling routine is that the rays no longer perpendicularly hit the surface. This violation of the null-test condition can lead to high fringe density and introduce high-order misalignment aberrations into the measurement result. This paper demonstrates that the high-order misalignment aberrations can be characterized by low-order misalignment aberrations; then, an efficient method is proposed to separate the high-order misalignment aberrations from subaperture data. With the proposed method, the fringe-nulling routine is not required. Instead, the subaperture data is measured under a nonzero fringe pattern. Then, all possible misalignment aberrations are removed with the proposed method. Finally, the full aperture map is acquired by connecting all subaperture data together. Experimental results showing the feasibility of the proposed procedure are presented.

  10. Double-resolution electron holography with simple Fourier transform of fringe-shifted holograms

    Volkov, V.V.; Han, M.G.; Zhu, Y.

    2013-01-01

    We propose a fringe-shifting holographic method with an appropriate image wave recovery algorithm leading to exact solution of holographic equations. With this new method the complex object image wave recovered from holograms appears to have much less traditional artifacts caused by the autocorrelation band present practically in all Fourier transformed holograms. The new analytical solutions make possible a double-resolution electron holography free from autocorrelation band artifacts and thus push the limits for phase resolution. The new image wave recovery algorithm uses a popular Fourier solution of the side band-pass filter technique, while the fringe-shifting holographic method is simple to implement in practice. - Highlights: • We propose a fringe-shifting holographic method simple enough for practical implementations. • Our new image-wave-recovery algorithm follows from exact solution of holographic equations. • With autocorrelation band removal from holograms it is possible to achieve double-resolution electron holography data free from several commonly known artifacts. • The new fringe-shifting method can reach an image wave resolution close to single fringe spacing

  11. Double-resolution electron holography with simple Fourier transform of fringe-shifted holograms

    Volkov, V.V., E-mail: volkov@bnl.gov; Han, M.G.; Zhu, Y.

    2013-11-15

    We propose a fringe-shifting holographic method with an appropriate image wave recovery algorithm leading to exact solution of holographic equations. With this new method the complex object image wave recovered from holograms appears to have much less traditional artifacts caused by the autocorrelation band present practically in all Fourier transformed holograms. The new analytical solutions make possible a double-resolution electron holography free from autocorrelation band artifacts and thus push the limits for phase resolution. The new image wave recovery algorithm uses a popular Fourier solution of the side band-pass filter technique, while the fringe-shifting holographic method is simple to implement in practice. - Highlights: • We propose a fringe-shifting holographic method simple enough for practical implementations. • Our new image-wave-recovery algorithm follows from exact solution of holographic equations. • With autocorrelation band removal from holograms it is possible to achieve double-resolution electron holography data free from several commonly known artifacts. • The new fringe-shifting method can reach an image wave resolution close to single fringe spacing.

  12. Adolescents’ identity experiments on the internet: consequences for social competence and self-concept unity

    Valkenburg, P.M.; Peter, J.

    2008-01-01

    The aim of this study was to investigate the effects of adolescents' online identity experiments on their social competence and self-concept unity. An online survey was conducted among 1,158 Dutch adolescents between 10 and 17 years of age. Using structural equation modeling, the authors

  13. Maintaining Unity - Relatives in older patient's fast-track treatment programmes. A Grounded theory study

    Berthelsen, Connie Bøttcher; Lindhardt, Tove; Frederiksen, Kirsten

    2014-01-01

    over 70 years of age participated. The constant comparative method was the guiding principle for simultaneous data collection, data analysis and coding, while theoretically sampling and writing memos. FINDINGS: Maintaining Unity emerged as the relatives' pattern of behaviour through which they resolved...

  14. 37 CFR 1.475 - Unity of invention before the International Searching Authority, the International Preliminary...

    2010-07-01

    ... general inventive concept (“requirement of unity of invention”). Where a group of inventions is claimed in... combinations of categories: (1) A product and a process specially adapted for the manufacture of said product; or (2) A product and a process of use of said product; or (3) A product, a process specially adapted...

  15. Politico-Legal Views of A. V. Kolchak on the Problems of the Unity of Russia

    Fedor S. Sosenkov

    2017-05-01

    Full Text Available The article considers political-legal views of A. V. Kolchak on problems of ensuring state unity of Russia. Some telegrams, letters, and other documents of A.V. Kolchak and his government, other leaders of the «white movement» are analyzed.

  16. Does John 17:11b, 21−23 refer to church unity? | Malan | HTS ...

    Read as a text of an antisociety, John 17:11b, 21–23 legitimises the unity of the separatist Johannine community, which could have comprised several such communities. This community opposed the Judean religion, Gnosticism, the followers of John the Baptist and three major groups in early Christianity. As text from the ...

  17. The Meaning of Meeting as an Existential Event in the Perspective of the Unity Paradigm

    Wąsiński Arkadiusz

    2016-12-01

    Full Text Available The article discusses the key meaning of meeting, understood as an existential event and considered in the perspective of the paradigm of unity. The two mentioned categories: meeting and paradigm of unity are not presented in the literature in the context of their direct relation to each other. Therefore, the main problem presented in the paper is: how far they are cognitively relevant. The starting point for reflections is the recognition of a meeting situation in the perspective of human spiritual development which happens through turning towards the other. This development is experienced in overcoming the tension between the declarative attitude towards the mutual love and the real act expressing the actual openness to this gift. According to Chiara Lubich, the gift of love is the central category of the paradigm of unity. If we follow Thomas Kuhn and define the paradigm as a worldview that unites a community in their holistic vision of the world, then it is the meeting that is an integral and necessary element of this paradigm. Experiencing a meeting, in this context, is the condition for reaching the spiritual unity in a community of people who are led by mutual love and out of that love bear with one another in their otherness.

  18. Paradigm of Unity as a Prospect for Research and Treatment in Psychology

    Biela Adam

    2014-07-01

    Full Text Available The purpose of this paper is to show the methodological power and potentiality of the concept paradigm of unity introduced originally in the ceremony on the occasion of honoring Chiara Lubich with the doctor honoris causa title by the Catholic University of Lublin in 1996. Originally this conception was used to suggest the societal activity of Chiara Lubich in building, via the Focolari movement, psychosocial infrastructures for unity in various social domains, (for example in the economy of communion, in politics (politicians for unity project, in public media (journalists for unity, in ecumenism and inter-religious contacts (ecumenical and inter-religion Focolari Centers This conception is a kind of a great inspiration (a kind of Copernican revolution in the social sciences which would motivate the social sciences to build their own research paradigm of a type of mental and methodological power and potentiality which could give a new vision of social world (as Copernicus did in natural sciences (Biela, 1996, 2006. Thomas Kuhn (1962 regarded the Copernician revolution as the one which, in the history of science, best illustrates the nature of scientific revolution. The essence of paradigm in a Kuhnian sense is a mentality change in its nature. Copernicus had to change the well-established geocentric system which functioned not only in the science of his day but also in culture, tradition, social perception, and even in the mentality of religious and political authorities. And he did it in a well prepared empirical, methodological and psychological way.

  19. How James Kept the Pace?; A Look into the Organic Unity of "Daisy Miller"

    Movaghati, Sina; Comcar, Milad

    2015-01-01

    Many Critics believe that Henry James has set the definitive standards of modern fiction writing. Undoubtedly his groundbreaking article "The Art of Fiction," which published for the first time in 1884, has a major contribution in developing the theories of fiction writing. The term Organic Unity has derived from a major Formalist…

  20. ‘It’s like a family!’ - The Unity and Community of Journalists

    Thomsen, Line Hassall

    To journalists at traditional broadcast media these are times of insecurity and opportunity, rapid change and ever-growing competition. In the face of growing pressure, the unity and community of journalists employed at traditional broadcast media is increasingly strengthened. This paper explores...

  1. UNITI Bundesverband mittelstaendischer Mineraloelunternehmen e.V.. Annual report 2015/2016. Review, around look, outlook

    2016-01-01

    The report presents the organisational structure and activities of the UNITI Bundesverband mittelstaendischer Mineraloelunternehmen e.V. (Berlin, Federal Republic of Germany). Above all, topical issues on business in the mineral oil and lubricant sector are discussed. There is an appendix containing data on the production and sales of petroleum products in the Federal Republic of Germany.

  2. Unity, Plurality and Explanation. The case of geographical economics and its neighbours

    C. Marchionni (Caterina)

    2005-01-01

    textabstractGeographical economics (also known as the new economic geography) is a recent approach developed within economics. It aims to provide a unified framework for the study of spatial agglomeration: the spatial concentration of economic activity. This search for unity stands in

  3. A Novel Module for Cultivate Unity and Harmony in Multicultural Society through Arts Education

    Balakrishnan, Balamuralithara

    2017-01-01

    Purpose: Promoting unity in multicultural society among Malaysians should start from school education since young age. Art through its own variety of approaches could show possibilities in addressing diversity in a community that consists of multiple ranges of racial and cultural backgrounds such as Malaysian community. Arts education is essential…

  4. q-Virasoro/W algebra at root of unity and parafermions

    H. Itoyama

    2014-12-01

    Full Text Available We demonstrate that the parafermions appear in the r-th root of unity limit of q-Virasoro/Wn algebra. The proper value of the central charge of the coset model slˆ(nr⊕slˆ(nm−nslˆ(nm−n+r is given from the parafermion construction of the block in the limit.

  5. Exploring Pan-Africanism's theories: from race-based solidarity to political unity and beyond

    Kasanda, Albert

    2016-01-01

    Roč. 28, č. 2 (2016), s. 179-195 ISSN 1369-6815 Institutional support: RVO:67985955 Keywords : solidarity * unity * sovereignty * race * Africa * Afropolitanism * Pan-Africanism * colonization Subject RIV: AA - Philosophy ; Religion Impact factor: 0.917, year: 2016

  6. Some Thoughts about Literature as a Means of Advancing Sustainable Unity and Stability in the Contemporary Nigerian State

    Anaso, George Nwaorah; Nwabudike, Christopher Eziafa

    2014-01-01

    An in-depth investigation was conducted on the possibility of literature employed to enhance cohesion, sustainable unity, national stability, and security of lives and property in the contemporary Nigeria. These three elements--unity, national stability, and security of lives and property are considered the key pillars of a modern state, the…

  7. Review of Patrick Chabal, Africa: The Politics of Suffering and Smiling, and Pierre Englebert, Africa: Unity, Sovereignty and Sorrow

    Kaarsholm, Preben

    2012-01-01

    Review article discussing Patrick Chabal, Africa: The Politics of Suffering and Smiling (London: Zed Books, 2009) and Pierre Englebert, Africa: Unity, Sovereignty and Sorrow (Bodulder, CO: Lynne Rienner, 2009).......Review article discussing Patrick Chabal, Africa: The Politics of Suffering and Smiling (London: Zed Books, 2009) and Pierre Englebert, Africa: Unity, Sovereignty and Sorrow (Bodulder, CO: Lynne Rienner, 2009)....

  8. Three-dimensional displacement measurement by fringe projection and speckle photography

    Barrientos, B.; Garcia-Marquez, J.; Cerca, M.; Hernandez-Bernal, C.

    2008-01-01

    3D displacement fields are measured by the combination of two optical methods, fringe projection and speckle photography. The use of only one camera recording the necessary information implies that no calibration procedures are necessary as is the case in techniques based on stereoscopy. The out-of-plane displacement is measured by fringe projection whereas speckle photography yields the 2-D in-plane component. To show the feasibility of the technique, we analyze a detailed morphological spatio-temporal evolution of a model of the Earth's crust while subjected to compression forces. The results show that the combination of fringe projection and speckle photography is well suited for this type of studies

  9. Identifikasi Ketersediaan dan Kualitas Sarana Prasarana Lingkungan di Urban Fringe Area Kelurahan Pudakpayung

    Ajeng Dwi Handayani

    2014-12-01

    Full Text Available Pudakpayung Sub District is the southest in Banyumanik District of Semarang City. This area is a Urban Fringe Area with high population growth and development area for human settlement. But not supported by good facilities and infrastructure. This research is aiming to see the availability and quality of facilities and infrastructure in this urban fringe area. So, this research can give the recommendation about availability and quality of facilities and infrastructure, especially in urban fringe area. This research will identify changes the pattern of human settlement and then identify the availability, quality, and distribution of neighborhoods facilities and infrastructure. The research method used in this research is quantitative descriptive method. The analysis uses the quantitative descriptive analysis with the provisions of SNI 03-1733-2004, scoring with a Likert scale, and spatial mapping. The result of this research indicate changes the pattern of land up and indicate the availability, quality, and distribution of every facilities and infrastructure.

  10. Modeling of Dipole and Quadrupole Fringe-Field Effects for the Advanced Photon Source Upgrade Lattice

    Borland, M.; Lindberg, R.

    2017-06-01

    The proposed upgrade of the Advanced Photon Source (APS) to a multibend-achromat lattice requires shorter and much stronger quadrupole magnets than are present in the existing ring. This results in longitudinal gradient profiles that differ significantly from a hard-edge model. Additionally, the lattice assumes the use of five-segment longitudinal gradient dipoles. Under these circumstances, the effects of fringe fields and detailed field distributions are of interest. We evaluated the effect of soft-edge fringe fields on the linear optics and chromaticity, finding that compensation for these effects is readily accomplished. In addition, we evaluated the reliability of standard methods of simulating hardedge nonlinear fringe effects in quadrupoles.

  11. Two-dimensional wavelet transform for reliability-guided phase unwrapping in optical fringe pattern analysis.

    Li, Sikun; Wang, Xiangzhao; Su, Xianyu; Tang, Feng

    2012-04-20

    This paper theoretically discusses modulus of two-dimensional (2D) wavelet transform (WT) coefficients, calculated by using two frequently used 2D daughter wavelet definitions, in an optical fringe pattern analysis. The discussion shows that neither is good enough to represent the reliability of the phase data. The differences between the two frequently used 2D daughter wavelet definitions in the performance of 2D WT also are discussed. We propose a new 2D daughter wavelet definition for reliability-guided phase unwrapping of optical fringe pattern. The modulus of the advanced 2D WT coefficients, obtained by using a daughter wavelet under this new daughter wavelet definition, includes not only modulation information but also local frequency information of the deformed fringe pattern. Therefore, it can be treated as a good parameter that represents the reliability of the retrieved phase data. Computer simulation and experimentation show the validity of the proposed method.

  12. Diffusive-dispersive mass transfer in the capillary fringe: Impact of water table fluctuations and heterogeneities

    Grathwohl, Peter; Haberer, Cristina; Ye, Yu

    Diffusive–dispersive mass transfer in the capillary fringe is important for many groundwater quality issues such as transfer of volatile compounds into (and out of) the groundwater, the supply of oxygen for aerobic degradation of hydrocarbons as well as for precipitation of minerals (e.g. iron...... hydroxides). 2D-laboratory scale experiments were used to investigate the transfer of oxygen into groundwater under non-reactive and reactive conditions, at steady state and with water table fluctuations. Results show that transfer of oxygen is limited by transverse dispersion in the capillary fringe...... and the dispersion coefficients are the same as below the water table. Water table fluctuations cause temporarily increased fluxes of oxygen into groundwater during draining conditions and entrapped air after water table rise. High-permeability inclusions in the capillary fringe enhance mass transfer of oxygen...

  13. An analytical-numerical comprehensive method for optimizing the fringing magnetic field

    Xiao Meiqin; Mao Naifeng

    1991-01-01

    The criterion of optimizing the fringing magnetic field is discussed, and an analytical-numerical comprehensive method for realizing the optimization is introduced. The method mentioned above consists of two parts, the analytical part calculates the field of the shims, which corrects the fringing magnetic field by using uniform magnetizing method; the numerical part fulfils the whole calculation of the field distribution by solving the equation of magnetic vector potential A within the region covered by arbitrary triangular meshes with the aid of finite difference method and successive over relaxation method. On the basis of the method, the optimization of the fringing magnetic field for a large-scale electromagnetic isotope separator is finished

  14. Speckle and fringe dynamics in imagingspeckle-pattern interferometry for spatial-filtering velocimetry

    Jakobsen, Michael Linde; Iversen, Theis F. Q.; Yura, Harold T.

    2011-01-01

    This paper analyzes the dynamics of laser speckles and fringes, formed in an imaging-speckle-pattern interferometer with the purpose of sensing linear three-dimensional motion and out-of-plane components of rotation in real time, using optical spatial-filtering-velocimetry techniques. The ensemble......-average definition of the cross-correlation function is applied to the intensity distributions, obtained in the observation plane at two positions of the object. The theoretical analysis provides a description for the dynamics of both the speckles and the fringes. The analysis reveals that both the magnitude...... and direction of all three linear displacement components of the object movement can be determined. Simultaneously, out-ofplane rotation of the object including the corresponding directions can be determined from the spatial gradient of the in-plane fringe motion throughout the observation plane. The theory...

  15. Fringe periods of color moirés in contact-type 3-D displays.

    Lee, Hyoung; Kim, Sung-Kyu; Sohn, Kwanghoon; Son, Jung-Young; Chernyshov, Oleksii O

    2016-06-27

    A mathematical formula of calculating the fringe periods of the color moirés appearing at the contact-type 3-D displays is derived. It is typical that the color moirés are chirped and the period of the line pattern in viewing zone forming optics is more than two times of that of the pixel pattern in the display panel. These make impossible to calculate the fringe periods of the color moirés with the conventional beat frequency formula. The derived formula work very well for any combination of two line patterns having either a same line period or different line periods. This is experimentally proved. Furthermore, it is also shown that the fringe period can be expressed in terms of the viewing distance and focal length of the viewing zone forming optics.

  16. High-speed X-ray phase tomography with Talbot interferometer and fringe scanning method

    Kibayashi, Shunsuke; Harasse, Sébastien; Yashiro, Wataru; Momose, Atsushi

    2012-01-01

    High-speed X-ray phase tomography based on the Fourier-transform method has been demonstrated with an X-ray Talbot interferometer using white synchrotron radiation. We report the experimental results of high-speed X-ray phase tomography with fringe-scanning method instead of Fourier-transform method to improve spatial resolution without a considerable increase of scan time. To apply fringe-scanning method to high speed tomography, we tested a scan that is a synchronous combination of one-way continuous movements of the sample rotation and the grating displacement. When this scanning method was combined with X-ray phase tomography, we were able to obtain a scan time of 5 s. A comparison of the image quality derived with the conventional approach and with the proposed approach using the fringe-scanning method showed that the latter had better spatial resolution.

  17. Fringe projection application for surface variation analysis on helical shaped silicon breast

    Vairavan, R.; Ong, N. R.; Sauli, Z.; Shahimin, M. M.; Kirtsaeng, S.; Sakuntasathien, S.; Alcain, J. B.; Paitong, P.; Retnasamy, V.

    2017-09-01

    Breast carcinoma is rated as a second collective cause of cancer associated death among adult females. Detection of the disease at an early stage would enhance the chance for survival. Established detection methods such as mammography, ultrasound and MRI are classified as non invasive breast cancer detection modality, but however they are not entire non-invasive as physical contact still occurs to the breast. Thus requirement for a complete non invasive and non contact is evident. Therefore, in this work, a novel application of digital fringe projection for early detection of breast cancer based on breast surface analysis is reported. Phase shift fringe projection technique and pixel tracing method was utilized to analyze the breast surface change due to the incidence of breast lump. Results have shown that the digital fringe projection is capable in detecting the existence of 1 cm sized lump within the breast sample.

  18. Feedback-stabilized fractional fringe laser interferometer for plasma density measurements

    Schneider, J.; Robertson, S.

    1979-01-01

    A feedback stabilization technique is described for a fractional fringe interferometer measuring plasma electron densities. Using this technique, a CO 2 laser Michelson interferometer with a pyroelectric detector exhibited a sensitivity of 3.4 x 10 -4 fringe on a 1-ms time scale and, due to acoustic pickup, 1.8 x 10 -2 fringe on a 10-ms time scale. The rise time is 45 μs. Stabilization against slow drifts in mirror distances is achieved by an electromechanically translated mirror driven by a servo system having a 0.2-s response time. A mechanical chopper in one of the two beam paths generates the signal which drives the servo system

  19. On characterizing terrain visibility graphs

    William Evans

    2015-06-01

    Full Text Available A terrain is an $x$-monotone polygonal line in the $xy$-plane. Two vertices of a terrain are mutually visible if and only if there is no terrain vertex on or above the open line segment connecting them. A graph whose vertices represent terrain vertices and whose edges represent mutually visible pairs of terrain vertices is called a terrain visibility graph. We would like to find properties that are both necessary and sufficient for a graph to be a terrain visibility graph; that is, we would like to characterize terrain visibility graphs.Abello et al. [Discrete and Computational Geometry, 14(3:331--358, 1995] showed that all terrain visibility graphs are “persistent”. They showed that the visibility information of a terrain point set implies some ordering requirements on the slopes of the lines connecting pairs of points in any realization, and as a step towards showing sufficiency, they proved that for any persistent graph $M$ there is a total order on the slopes of the (pseudo lines in a generalized configuration of points whose visibility graph is $M$.We give a much simpler proof of this result by establishing an orientation to every triple of vertices, reflecting some slope ordering requirements that are consistent with $M$ being the visibility graph, and prove that these requirements form a partial order. We give a faster algorithm to construct a total order on the slopes. Our approach attempts to clarify the implications of the graph theoretic properties on the ordering of the slopes, and may be interpreted as defining properties on an underlying oriented matroid that we show is a restricted type of $3$-signotope.

  20. Dynamic consistency of leader/fringe models of exhaustible resource markets

    Pelot, R.P.

    1990-01-01

    A dynamic feedback pricing model is developed for a leader/fringe supply market of exhaustible resources. The discrete game optimization model includes marginal costs which may be quadratic functions of cumulative production, a linear demand curve and variable length periods. The multiperiod formulation is based on the nesting of later periods' Kuhn-Tucker conditions into earlier periods' optimizations. This procedure leads to dynamically consistent solutions where the leader's strategy is credible as he has no incentive to alter his original plan at some later stage. A static leader-fringe model may yield multiple local optima. This can result in the leader forcing the fringe to produce at their capacity constraint, which would otherwise be non-binding if it is greater than the fringe's unconstrained optimal production rate. Conditions are developed where the optimal solution occurs at a corner where constraints meet, of which limit pricing is a special case. The 2-period leader/fringe feedback model is compared to the computationally simpler open-loop model. Under certain conditions, the open-loop model yields the same result as the feedback model. A multiperiod feedback model of the world oil market with OPEC as price-leader and the remaining world oil suppliers comprising the fringe is compared with the open-loop solution. The optimal profits and prices are very similar, but large differences in production rates may occur. The exhaustion date predicted by the open-loop model may also differ from the feedback outcome. Some numerical tests result in non-contiguous production periods for a player or limit pricing phases. 85 refs., 60 figs., 30 tabs

  1. Study of 3D solder-paste profilometer by dual digital fringe projection

    Juan, Yi-Hua; Yih, Jeng-Nan; Cheng, Nai-Jen

    2013-09-01

    In a 3D profilometer by the fringe projection, the shadow will be produced inevitably, thus the fringes cannot be detected in the region of the shadow. In addition, a smooth surface or a metal surface produces the specular reflection, and then, no projection fringe can be recorded in the region of oversaturation on CCD. This paper reveals a proposed system for improved these defects and shows some preliminary improved 3D profiles by the proposed dual fringe projection. To obtain the profile of sample hided in the shadow and the oversaturation, this study used the dual-projection system by two projectors. This system adopted two different directions of fringe projection and illuminates them alternately, therefore, the shadow and the oversaturation produced in their corresponding locations. Two raw 3D profiles obtained from taking the dual-projection by the four-step phase-shift. A set of algorithms used to identify the pixels of the shadow and the oversaturation, and create an error-map. According to the error-map to compensate, two 3D profiles merged into an error-reduced 3D profile. We used the solder paste as a testing sample. After comparatively analyzing the 3D images obtained by our measurement system and by a contact stylus profilometer, the result shows that our measurement system can effectively reduce the error caused by shadows and oversaturation. Fringe projection system by using a projector is a non-contact, full field and quickly measuring system. The proposed dual-projection by dual-projectors can effectively reduce the shadow and the oversaturation errors and enhance the scope of application of the 3D contour detection, especially in the detection of precision structure parts with specular reflection.

  2. Fourier fringe analysis and its application to metrology of extreme physical phenomena: a review [Invited].

    Takeda, Mitsuo

    2013-01-01

    The paper reviews a technique for fringe analysis referred to as Fourier fringe analysis (FFA) or the Fourier transform method, with a particular focus on its application to metrology of extreme physical phenomena. Examples include the measurement of extremely small magnetic fields with subfluxon sensitivity by electron wave interferometry, subnanometer wavefront evaluation of projection optics for extreme UV lithography, the detection of sub-Ångstrom distortion of a crystal lattice, and the measurement of ultrashort optical pulses in the femotsecond to attosecond range, which show how the advantages of FFA are exploited in these cutting edge applications.

  3. Explanations for Long-Distance Counter-Urban Migration into Fringe Areas in Denmark

    Andersen, Hans Skifter

    2009-01-01

    In Denmark, as in most other European countries, there is a net migration from the less urbanized to the more urbanized parts of the country. This article summarizes the results of a Danish study on the extent and composition of migration fl ows; and on factors and conditions that have a decisive...... infl uence on migration to fringe areas. The study shows that a considerable share of movers to the fringe areas in Denmark can be characterised as income-transfer mover. They are people without employment moving to get lower housing costs. But there are also groups of people moving to employment...

  4. The effect of geographical centralization of education for outmigration from fringe areas

    Andersen, Hans Skifter

    During the last 25 years population in fringe areas in Denmark has declined. The main reason has been that young people leave these areas and seldom come back. In this study is examined the connection between young people’s outmigration, their choice of education and the location of educational...... institutions. It is shown that geographical centralization of education since 1990 and the tendency for more young people to choose higher education has resulted in an increase in the outmigration of young people from fringe areas...

  5. Demodulation of moire fringes in digital holographic interferometry using an extended Kalman filter.

    Ramaiah, Jagadesh; Rastogi, Pramod; Rajshekhar, Gannavarpu

    2018-03-10

    This paper presents a method for extracting multiple phases from a single moire fringe pattern in digital holographic interferometry. The method relies on component separation using singular value decomposition and an extended Kalman filter for demodulating the moire fringes. The Kalman filter is applied by modeling the interference field locally as a multi-component polynomial phase signal and extracting the associated multiple polynomial coefficients using the state space approach. In addition to phase, the corresponding multiple phase derivatives can be simultaneously extracted using the proposed method. The applicability of the proposed method is demonstrated using simulation and experimental results.

  6. The Acropora inheritance: A reinterpretation of the development of fringing reefs in Barbados, West Indies

    Lewis, John B.

    1984-11-01

    The discovery of the widespread occurrence of the remains of the reef coral Acropora palmata within the fabric of the fringing reefs on the west coast of Barbados requires a new interpretation of their Holocene development. Radiocarbon dating of the A. palmata framework suggests that reef construction by this species began as early as 2,300 years B.P. A. palmata probably flourished in Barbados into the present century but has now declined. The present fringing reefs are characterized by a core and base of A. palmata upon which subsequent colonization took place, especially by Montastrea annularis, Porites porites and coralline algae.

  7. High-efficiency holograms fixed in lithium niobate after recording using a digital fringe stabilization system.

    Arizmendi, Luis; Ambite, Emilio J

    2012-02-20

    We used a digital feedback control loop system to produce reproducible fixed volume transmission holograms of high diffraction efficiency. Different strategies were investigated to obtain holograms of good quality and the highest refractive index modulation depth. Using this control system, we were able to record holograms with stationary fringes. Additionally to using the stationary fringe recording, a double recording-fixing schedule resulted in being the most appropriate one to produce reproducible holograms of better characteristics. This strategy is discussed and compared with other already established ones. © 2012 Optical Society of America

  8. Real-time detection and elimination of nonorthogonality error in interference fringe processing

    Hu Haijiang; Zhang Fengdeng

    2011-01-01

    In the measurement system of interference fringe, the nonorthogonality error is a main error source that influences the precision and accuracy of the measurement system. The detection and elimination of the error has been an important target. A novel method that only uses the cross-zero detection and the counting is proposed to detect and eliminate the nonorthogonality error in real time. This method can be simply realized by means of the digital logic device, because it does not invoke trigonometric functions and inverse trigonometric functions. And it can be widely used in the bidirectional subdivision systems of a Moire fringe and other optical instruments.

  9. Urban fringe renewal with urban catalysts elements: connections in an unconnected area

    Yanru, Yang

    2014-01-01

    Based on Santa Coloma as a main case,analyzing how can be update there in this crisis situation to do suitable interventions to achieve a great effect. After analyzing the Santa Coloma area,I pay attention to its urban marginality.It has the territorial marginality,the marginality of the relationship with Barcelona,the marginality of the people and life style and so on. Urban fringe is corresponding the city center, the city of mainstream.The socalled "fringe" can be underst...

  10. Two-shot fringe pattern phase-amplitude demodulation using Gram-Schmidt orthonormalization with Hilbert-Huang pre-filtering.

    Trusiak, Maciej; Patorski, Krzysztof

    2015-02-23

    Gram-Schmidt orthonormalization is a very fast and efficient method for the fringe pattern phase demodulation. It requires only two arbitrarily phase-shifted frames. Images are treated as vectors and upon orthogonal projection of one fringe vector onto another the quadrature fringe pattern pair is obtained. Orthonormalization process is very susceptible, however, to noise, uneven background and amplitude modulation fluctuations. The Hilbert-Huang transform based preprocessing is proposed to enhance fringe pattern phase demodulation by filtering out the spurious noise and background illumination and performing fringe normalization. The Gram-Schmidt orthonormalization process error analysis is provided and its filtering-expanded capabilities are corroborated analyzing DSPI fringes and performing amplitude demodulation of Bessel fringes. Synthetic and experimental fringe pattern analyses presented to validate the proposed technique show that it compares favorably with other pre-filtering schemes, i.e., Gaussian filtering and continuous wavelet transform.

  11. Incremental Visualizer for Visible Objects

    Bukauskas, Linas; Bøhlen, Michael Hanspeter

    This paper discusses the integration of database back-end and visualizer front-end into a one tightly coupled system. The main aim which we achieve is to reduce the data pipeline from database to visualization by using incremental data extraction of visible objects in a fly-through scenarios. We...... also argue that passing only relevant data from the database will substantially reduce the overall load of the visualization system. We propose the system Incremental Visualizer for Visible Objects (IVVO) which considers visible objects and enables incremental visualization along the observer movement...... path. IVVO is the novel solution which allows data to be visualized and loaded on the fly from the database and which regards visibilities of objects. We run a set of experiments to convince that IVVO is feasible in terms of I/O operations and CPU load. We consider the example of data which uses...

  12. Visible neutrino decay at DUNE

    Coloma, Pilar [Fermilab; Peres, Orlando G. [ICTP, Trieste

    2017-05-09

    If the heaviest neutrino mass eigenstate is unstable, its decay modes could include lighter neutrino eigenstates. In this case part of the decay products could be visible, as they would interact at neutrino detectors via mixing. At neutrino oscillation experiments, a characteristic signature of such \\emph{visible neutrino decay} would be an apparent excess of events at low energies. We focus on a simple phenomenological model in which the heaviest neutrino decays as $\

  13. Three-dimensional shape profiling by out-of-focus projection of colored pulse width modulation fringe patterns.

    Silva, Adriana; Flores, Jorge L; Muñoz, Antonio; Ayubi, Gastón A; Ferrari, José A

    2017-06-20

    Three-dimensional (3D) shape profiling by sinusoidal phase-shifting methods is affected by the non-linearity of the projector. To overcome this problem, the defocusing technique has become an important alternative to generate sinusoidal fringe patterns. The precision of this method depends on the binary pattern used and on the defocusing applied. To improve the defocusing technique, we propose the implementation of a color-based binary fringe patterns. The proposed technique involves the generation of colored pulse width modulation (PWM) fringe patterns, which are generated with different frequencies at the carrier signal. From an adequate selection of these frequencies, the colored PWM fringe patterns will lead to amplitude harmonics lower than the conventional PWM fringe patterns. Hence, the defocusing can decrease, and the 3D shape profiling can be more accurate. Numerical simulations and experimental results are presented as validation.

  14. 29 CFR 4.54 - Locality basis of wage and fringe benefit determinations.

    2010-07-01

    ... pertinent to the employment of particular classes of service employees on the varied kinds of service... of prevailing wage rates and prevailing fringe benefits in all situations under the Act. The locality... area. For example, a survey by the Bureau of Labor Statistics of the Baltimore, Maryland Standard...

  15. Color Fringes Bordering Black Stripes at the Bottom of a Swimming Pool

    Fuster, Gonzalo; Rojas, Roberto; Slüsarenko, Viktor

    2016-01-01

    We have observed a nice example of chromatic dispersion due to refraction in water, in the form of color fringes bordering the black stripes that exist at the bottom of a swimming pool. Here we give a qualitative description of the phenomenon, explaining the role of the black stripes and the dispersive index of refraction of water.

  16. Interference fringes in synchrotron section topography of implanted silicon with a very large ion range

    Wieteska, K.; Dluzewska, K.; Wierzchowski, W.; Graeff, W.

    1997-01-01

    Silicon crystals implanted with 9 MeV protons to the dose of 5x10 17 cm -2 were studied with X-ray topographic methods using both conventional and synchrotron radiation sources. After the implantation the crystals were thermally and electron annealed. The implantation produced large 600 μm thick shot-through layer while the total thickness of the samples was 1.6 mm. It was confirmed by means of double crystal topography that the whole crystal was elastically bent. The transmission section patterns revealed both parts of the implanted crystal separated by strong contrasts coming from the most damaged layer and distinct interference fringes which appeared on one side of the topograph only. The locations of the fringes changed when the beam entered the other side of the sample. The mechanism of fringe formation was studied with numerical integration of the Takagi-Taupin equations, especially studying the intensity distribution in the diffraction plane. The simulations reproduced the location of the fringes in different geometries and indicate that they can be caused both by variable crystal curvature and variable ion dose. (author)

  17. 29 CFR 4.176 - Payment of fringe benefits to temporary and part-time employees.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Payment of fringe benefits to temporary and part-time... to temporary and part-time employees. (a) As set forth in § 4.165(a)(2), the Act makes no distinction, with respect to its compensation provisions, between temporary, part-time, and full-time employees...

  18. Modeling of the fringe shift in multiple beam interference for glass ...

    An experiment is conducted using liquid wedge interferometer where the fiber of a nearly quadratic .... For a fringe shift dz < ∆z, we obtain this inequality. µf − µL < λt2 .... [11] L M Boggs, H M Presby and D Marcuse, Bell System Tech. J. 58, 867 ...

  19. 48 CFR 22.406-2 - Wages, fringe benefits, and overtime.

    2010-10-01

    ... exact cash amounts. In these cases, the hourly cash equivalent of the cost of these items shall be... the contractor's contributions, costs, or payment of cash equivalents for fringe benefits. Overtime... cash to the laborer or mechanic, or deducted from payments under the conditions set forth in 29 CFR 3.5...

  20. Applicability of neural networks to etalon fringe filtering in laser spectrometers

    Nicely, J. M.; Hanisco, T. F.; Riris, H.

    2018-05-01

    We present a neural network algorithm for spectroscopic retrievals of concentrations of trace gases. Using synthetic data we demonstrate that a neural network is well suited for filtering etalon fringes and provides superior performance to conventional least squares minimization techniques. This novel method can improve the accuracy of atmospheric retrievals and minimize biases.

  1. Phase extraction based on iterative algorithm using five-frame crossed fringes in phase measuring deflectometry

    Jin, Chengying; Li, Dahai; Kewei, E.; Li, Mengyang; Chen, Pengyu; Wang, Ruiyang; Xiong, Zhao

    2018-06-01

    In phase measuring deflectometry, two orthogonal sinusoidal fringe patterns are separately projected on the test surface and the distorted fringes reflected by the surface are recorded, each with a sequential phase shift. Then the two components of the local surface gradients are obtained by triangulation. It usually involves some complicated and time-consuming procedures (fringe projection in the orthogonal directions). In addition, the digital light devices (e.g. LCD screen and CCD camera) are not error free. There are quantization errors for each pixel of both LCD and CCD. Therefore, to avoid the complex process and improve the reliability of the phase distribution, a phase extraction algorithm with five-frame crossed fringes is presented in this paper. It is based on a least-squares iterative process. Using the proposed algorithm, phase distributions and phase shift amounts in two orthogonal directions can be simultaneously and successfully determined through an iterative procedure. Both a numerical simulation and a preliminary experiment are conducted to verify the validity and performance of this algorithm. Experimental results obtained by our method are shown, and comparisons between our experimental results and those obtained by the traditional 16-step phase-shifting algorithm and between our experimental results and those measured by the Fizeau interferometer are made.

  2. Mapping landscape service provision of cropland in the urban fringe : the case of Wuhan, China

    Zhou, T.; Koomen, E.; Ke, X.

    2016-01-01

    People benefit from cropland through food production and a variety of environmental and recreational benefits. However, the provision of the different functions offered by agricultural landscape deteriorates as a consequence of ongoing urban development, especially in urban fringe. To help define

  3. Theoretical study of the properties of X-ray diffraction moiré fringes. I

    Yoshimura, Jun-ichi

    2015-01-01

    A detailed and comprehensive theoretical description of X-ray diffraction moiré fringes for a bicrystal specimen is given on the basis of a calculation by plane-wave dynamical diffraction theory, where the effect of the Pendellösung intensity oscillation on the moiré pattern is explained in detail. A detailed and comprehensive theoretical description of X-ray diffraction moiré fringes for a bicrystal specimen is given on the basis of a calculation by plane-wave dynamical diffraction theory. Firstly, prior to discussing the main subject of the paper, a previous article [Yoshimura (1997 ▸). Acta Cryst. A53, 810–812] on the two-dimensionality of diffraction moiré patterns is restated on a thorough calculation of the moiré interference phase. Then, the properties of moiré fringes derived from the above theory are explained for the case of a plane-wave diffraction image, where the significant effect of Pendellösung intensity oscillation on the moiré pattern when the crystal is strained is described in detail with theoretically simulated moiré images. Although such plane-wave moiré images are not widely observed in a nearly pure form, knowledge of their properties is essential for the understanding of diffraction moiré fringes in general

  4. Singlet-to-triplet interconversion using hyperfine as well as ferromagnetic fringe fields.

    Wohlgenannt, M; Flatté, M E; Harmon, N J; Wang, F; Kent, A D; Macià, F

    2015-06-28

    Until recently the important role that spin-physics ('spintronics') plays in organic light-emitting devices and photovoltaic cells was not sufficiently recognized. This attitude has begun to change. We review our recent work that shows that spatially rapidly varying local magnetic fields that may be present in the organic layer dramatically affect electronic transport properties and electroluminescence efficiency. Competition between spin-dynamics due to these spatially varying fields and an applied, spatially homogeneous magnetic field leads to large magnetoresistance, even at room temperature where the thermodynamic influences of the resulting nuclear and electronic Zeeman splittings are negligible. Spatially rapidly varying local magnetic fields are naturally present in many organic materials in the form of nuclear hyperfine fields, but we will also review a second method of controlling the electrical conductivity/electroluminescence, using the spatially varying magnetic fringe fields of a magnetically unsaturated ferromagnet. Fringe-field magnetoresistance has a magnitude of several per cent and is hysteretic and anisotropic. This new method of control is sensitive to even remanent magnetic states, leading to different conductivity/electroluminescence values in the absence of an applied field. We briefly review a model based on fringe-field-induced polaron-pair spin-dynamics that successfully describes several key features of the experimental fringe-field magnetoresistance and magnetoelectroluminescence. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  5. IN SITU ABIOTIC DETOXIFICATION AND IMMOBILIZATION OF HEXAVALENT CHROMIUM IN THE CAPILLARY FRINGE ZONE

    Detailed site characterization data from the former electroplating shop at the U.S. Coast Guard Air Support Center, Elizabeth City, North Carolina suggested that the elevated Cr(VI) in the capillary fringe area had contaminated the ground water at the site. Most of the mobile Cr(...

  6. Telecentric 3D profilometry based on phase-shifting fringe projection.

    Li, Dong; Liu, Chunyang; Tian, Jindong

    2014-12-29

    Three dimensional shape measurement in the microscopic range becomes increasingly important with the development of micro manufacturing technology. Microscopic fringe projection techniques offer a fast, robust, and full-field measurement for field sizes from approximately 1 mm2 to several cm2. However, the depth of field is very small due to the imaging of non-telecentric microscope, which is often not sufficient to measure the complete depth of a 3D-object. And the calibration of phase-to-depth conversion is complicated which need a precision translation stage and a reference plane. In this paper, we propose a novel telecentric phase-shifting projected fringe profilometry for small and thick objects. Telecentric imaging extends the depth of field approximately to millimeter order, which is much larger than that of microscopy. To avoid the complicated phase-to-depth conversion in microscopic fringe projection, we develop a new system calibration method of camera and projector based on telecentric imaging model. Based on these, a 3D reconstruction of telecentric imaging is presented with stereovision aided by fringe phase maps. Experiments demonstrated the feasibility and high measurement accuracy of the proposed system for thick object.

  7. Stress Analysis of an Edge-Cracked Plate by using Photoelastic Fringe Phase Shifting Method

    Baek, Tae Hyun; Kim, Myung Soo; Cho, Sung Ho

    2000-01-01

    The method of photoelasticity allows one to obtain principal stress differences and principal stress directions in a photoelastic model. In the classical approach, the photoelastic parameters are measured manually point by point. The previous methods require much time and skill in the identification and measurement of photoelastic data. Fringe phase shifting method has been recently developed and widely used to measure and analyze fringe data in photo-mechanics. This paper presents the test results of photoelastic fringe phase shifting technique for the stress analysis of a circular disk under compression and an edge-cracked plate subjected to tensile load. The technique used here requires four phase stepped photoelastic images obtained from a circular polariscope by rotating the analyzer at 0 .deg. ,45 .deg. ,90 .deg. ,and 135 .deg. . Experimental results are compared with those or FEM. Good agreement between the results can be observed. However, some error may be included if the technique is used to general direction which is not parallel to isoclinic fringe

  8. Investigation on the intense fringe formation phenomenon downstream hot-image plane.

    Hu, Yonghua; Li, Guohui; Zhang, Lifu; Huang, Wenti; Chen, Shuming

    2015-11-30

    The propagation of a high-power flat-topped Gaussian beam, which is modulated by three parallel wirelike scatterers, passing through a downstream Kerr medium slab and free spaces is investigated. A new phenomenon is found that a kind of intense fringe with intensity several times that of the incident beam can be formed in a plane downstream the Kerr medium. This kind of intense fringe is another result in the propagation process of nonlinear imaging and it locates scores of centimeters downstream the predicted hot image plane. Moreover, the intensity of this fringe can achieve the magnitude of that of hot image in corresponding single-scatterer case, and this phenomenon can arise only under certain conditions. As for the corresponding hot images, they are also formed but largely suppressed. The cause of the formation of such an intense fringe is analyzed and found related to interference in the free space downstream the Kerr medium. Moreover, the ways it is influenced by some important factors such as the wavelength of incident beam and the properties of scatterers and Kerr medium are discussed, and some important properties and relations are revealed.

  9. Land Use Land Cover Change in the fringe of eThekwini ...

    Concerns on urban environmental quality, increasing knowledge on impacts of climate change and pursuit for sustainable development have increased the need for past, current and future knowledge on the transformation of remnant urban fringe green ecosystems. Using land-cover change modeler and a Markov chain ...

  10. Fringe proteins modulate Notch-ligand cis and trans interactions to specify signaling states.

    LeBon, Lauren; Lee, Tom V; Sprinzak, David; Jafar-Nejad, Hamed; Elowitz, Michael B

    2014-09-25

    The Notch signaling pathway consists of multiple types of receptors and ligands, whose interactions can be tuned by Fringe glycosyltransferases. A major challenge is to determine how these components control the specificity and directionality of Notch signaling in developmental contexts. Here, we analyzed same-cell (cis) Notch-ligand interactions for Notch1, Dll1, and Jag1, and their dependence on Fringe protein expression in mammalian cells. We found that Dll1 and Jag1 can cis-inhibit Notch1, and Fringe proteins modulate these interactions in a way that parallels their effects on trans interactions. Fringe similarly modulated Notch-ligand cis interactions during Drosophila development. Based on these and previously identified interactions, we show how the design of the Notch signaling pathway leads to a restricted repertoire of signaling states that promote heterotypic signaling between distinct cell types, providing insight into the design principles of the Notch signaling system, and the specific developmental process of Drosophila dorsal-ventral boundary formation.

  11. Fringing field effects in negative capacitance field-effect transistors with a ferroelectric gate insulator

    Hattori, Junichi; Fukuda, Koichi; Ikegami, Tsutomu; Ota, Hiroyuki; Migita, Shinji; Asai, Hidehiro; Toriumi, Akira

    2018-04-01

    We study the effects of fringing electric fields on the behavior of negative-capacitance (NC) field-effect transistors (FETs) with a silicon-on-insulator body and a gate stack consisting of an oxide film, an internal metal film, a ferroelectric film, and a gate electrode using our own device simulator that can properly handle the complicated relationship between the polarization and the electric field in ferroelectric materials. The behaviors of such NC FETs and the corresponding metal-oxide-semiconductor (MOS) FETs are simulated and compared with each other to evaluate the effects of the NC of the ferroelectric film. Then, the fringing field effects are evaluated by comparing the NC effects in NC FETs with and without gate spacers. The fringing field between the gate stack, especially the internal metal film, and the source/drain region induces more charges at the interface of the film with the ferroelectric film. Accordingly, the function of the NC to modulate the gate voltage and the resulting function to improve the subthreshold swing are enhanced. We also investigate the relationships of these fringing field effects to the drain voltage and four design parameters of NC FETs, i.e., gate length, gate spacer permittivity, internal metal film thickness, and oxide film thickness.

  12. Western Pairie Fringed Orchid: Its Status, Ecology, and in Vitro Propagation

    Jyotsna Sharma; J. W. Van Sambeek; Christopher J. Starbuck

    2002-01-01

    Western prairie fringed orchid (Platanthera praeclara Sheviak and Bowles), listed in 1989 as federally threatened, has been extirpated from 75% of historic sites throughout its range. We describe (a) threats to the orchid; (b) seed germination on synthetic medium; and (c) in vitro germination with mycorrhizal fungi. Destruction of prairies for...

  13. Applicability of Neural Networks to Etalon Fringe Filtering in Laser Spectrometers

    Nicely, J. M.; Hanisco, T. F.; Riris, H.

    2018-01-01

    We present a neural network algorithm for spectroscopic retrievals of concentrations of trace gases. Using synthetic data we demonstrate that a neural network is well suited for filtering etalon fringes and provides superior performance to conventional least squares minimization techniques. This novel method can improve the accuracy of atmospheric retrievals and minimize biases.

  14. Transport-related fringe benefits: implications for moving and the journey to work

    van Ommeren, J.N.; van der Vlist, A.J.; Nijkamp, P.

    2006-01-01

    Firms offer compensation not only through wages, but also offer transport-related fringe benefits such as transport benefits (company cars, travel, and parking benefits) and relocation benefits to job applicants. We argue that these benefits are not randomly offered to employees, but depend on the

  15. Flexible Fringe Benefit Plans Save You Money and Keep Employees Happy.

    Johnson, Rob

    1987-01-01

    This fringe benefit plan saves money for both employers and employees, provides a better fit for employees' actual benefit needs, and allows employees to choose options from a menu of benefits. One option is a flexible spending plan. Employees place a portion of their before-tax income into a special account from which allowable expenses are paid…

  16. 29 CFR 4.5 - Contract specification of determined minimum wages and fringe benefits.

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Contract specification of determined minimum wages and... of determined minimum wages and fringe benefits. (a) Any contract in excess of $2,500 shall contain, as an attachment, the applicable, currently effective wage determination specifying the minimum wages...

  17. Structural diversity of a family of aluminophosphates with Al/P ratio of non-unity

    Yu, Jihong; Xu, Ruren; Li, Jiyang

    2000-05-01

    A family of organically templated aluminophosphates (denoted AlPOs) with an Al/P ratio of non-unity has been prepared with 1-D chain, 2-D layer and 3-D open-framework architectures. Their inorganic parts are constructed from alternating Al-centered polyhedra (AlO 4, AlO 5, AlO 4(OH 2) 2) and P-centered tetrahedra P(OAl) nO 4- n ( n=0, 1, 2, 3). The existence of terminal POH and/or PO groups in the structures results in the deviation of Al/P ratio from unity, and the commonly encountered Al/P ratios are 1/2, 3/5, 2/3, 3/4, 4/5 and 5/6. This review will discuss the structural features of these AlPOs with various dimensionalities and stoichiometries.

  18. The one and the many: the search for unity in nature.

    Gleiser, Marcelo

    2015-12-01

    The essence of physical reality-what the world consists of-has been a heated focus of contention for millennia. First with philosophers and then with physicists, the debate has been polarized since the beginning: while those loosely known as Platonists search for an underlying unity in nature, others caution that such unity is unachievable in practice and in principle. In this essay, we review both positions, arguing strongly for the latter in anticipation of experimental results from the Large Hadron Collider, the particle accelerator from the European Center for Nuclear Research. We further argue that, for the first time in history, the material essence of reality could be determined from an empirical standpoint as opposed to a purely dialectic one, settling the age-old debate. © 2015 New York Academy of Sciences.

  19. Dual pairs of gabor frames for trigonometric generators without the partition of unity property

    Christensen, Ole; Jakobsen, Mads Sielemann

    2011-01-01

    Frames is a strong tool to obtain series expansions in Hilbert spaces under less restrictive conditions than imposed by orthonormal bases. In order to apply frame theory it is necessary to construct a pair of so called dual frames. The goal of the article is to provide explicit constructions...... of dual pairs of frames having Gabor structure. Unlike the results presented in the literature we do not base the constructions on a generator satisfying the partition of unity constraint....

  20. The Unity of Application of International Law at the Global Level and the Responsibility of Judges

    DUPUY, Pierre-Marie

    2007-01-01

    This article analyses the relationship between Courts and tribunals in the interpretation and application of international law. The goal here is of crucial importance: that of guaranteeing the unity of international law and avoid fragmentation. This relationship is considered at two levels. The first level is vertical: how do national courts perceive and react to international law? In an ideal approach, based on a federalist model, there would be an organic hierarchy insuring that nation...

  1. Quantum groups, roots of unity and particles on quantized Anti-de Sitter space

    Steinacker, H.

    1997-01-01

    Quantum groups in general and the quantum Anti-de Sitter group U q (so(2,3)) in particular are studied from the point of view of quantum field theory. The author shows that if q is a suitable root of unity, there exist finite-dimensional, unitary representations corresponding to essentially all the classical one-particle representations with (half) integer spin, with the same structure at low energies as in the classical case. In the massless case for spin ≥ 1, open-quotes naiveclose quotes representations are unitarizable only after factoring out a subspace of open-quotes pure gaugesclose quotes, as classically. Unitary many-particle representations are defined, with the correct classical limit. Furthermore, the author identifies a remarkable element Q in the center of U q (g), which plays the role of a BRST operator in the case of U q (so(2,3)) at roots of unity, for any spin ≥ 1. The associated ghosts are an intrinsic part of the indecomposable representations. The author shows how to define an involution on algebras of creation and anihilation operators at roots of unity, in an example corresponding to non-identical particles. It is shown how nonabelian gauge fields appear naturally in this framework, without having to define connections on fiber bundles. Integration on Quantum Euclidean space and sphere and on Anti-de Sitter space is studied as well. The author gives a conjecture how Q can be used in general to analyze the structure of indecomposable representations, and to define a new, completely reducible associative (tensor) product of representations at roots of unity, which generalizes the standard open-quotes truncatedclose quotes tensor product as well as many-particle representations

  2. Body-self unity and self-esteem in patients with rheumatic diseases.

    Bode, Christina; van der Heij, Anouk; Taal, Erik; van de Laar, Mart A F J

    2010-12-01

    Perceptions and evaluations of the own body are important sources of self-esteem. Having a rheumatic disease challenges maintenance of positive self-esteem due to consequences of the disease such as unfavorable sensations as pain and limited (physical) functioning. We expect that a positive experience of the own body in spite of a rheumatic disease (body-self harmony) will be associated with higher levels of self-esteem and that experiencing the body as unworthy part of the own person or as disabler for own strivings (body-self alienation) will result in lower levels of self-esteem. For this explorative study, the body experience questionnaire (BEQ) measuring body-self unity was developed and piloted. One hundred sixty-eight patients visiting the outpatient rheumatology clinic of the Medisch Spectrum Twente, Enschede, The Netherlands, completed a questionnaire on touchscreen computers to measure body-self unity (BEQ), illness cognitions (illness cognition questionnaire), pain intensity, functional limitations (health assessment questionnaire disability index), self-esteem (Rosenberg Self-Esteem Scale) and demographics. To analyze predictors of self-esteem, hierarchical regression analyses were employed. The BEQ revealed a two-factor structure with good reliability (subscale harmony, four items, Cronbach's α = 0.76; subscale alienation, six items, Cronbach's α = 0.84). The final model of the hierarchical regression analyses showed that self-esteem can be predicted by the illness cognitions helplessness and acceptance, by harmony and most strongly by alienation from the body. R(2) of the final model was 0.50. The relationship between functional limitations and self-esteem was totally mediated by the psychological constructs body-self unity and illness cognitions. This explorative study showed the importance of the unity of body and self for self-esteem in patients with a rheumatic disease.

  3. How Can We Best Achieve Contracting Unity of Effort in the CENTCOM Area of Responsibility?

    Torres, Isaac; Ross, Marvin

    2013-01-01

    Approved for public release; distribution is unlimited. The purpose of this research is to investigate how to better achieve contracting unity of effort in the U.S. Central Command area of operations and the implications for other combatant commands in similar contingency situations. In the U.S. Central Command area of operations, numerous contracting agencies operate in Afghanistan, each with its own contract authority, but these agencies have little synchronization and no common operatin...

  4. Getting to one from title 10 + title 32 unity of effort in the homeland

    Prosch, Caroline Ross.

    2011-01-01

    CHDS State/Local Approved for public release; distribution is unlimited This thesis bridges the knowledge gap between Title 10 Active Duty and Title 32 National Guard in order to breakdown cultural barriers and reach unity of effort for response operations in the homeland. Regrettably, a unified response was missing among Title 10 Active Duty and Title 32 National Guard members following Hurricane Katrina. Since then, initiatives based in doctrine, statutes and formal recommendations...

  5. Quantum groups, roots of unity and particles on quantized Anti-de Sitter space

    Steinacker, Harold [Univ. of California, Berkeley, CA (United States). Dept. of Physics

    1997-05-23

    Quantum groups in general and the quantum Anti-de Sitter group Uq(so(2,3)) in particular are studied from the point of view of quantum field theory. The author shows that if q is a suitable root of unity, there exist finite-dimensional, unitary representations corresponding to essentially all the classical one-particle representations with (half) integer spin, with the same structure at low energies as in the classical case. In the massless case for spin ≥ 1, "naive" representations are unitarizable only after factoring out a subspace of "pure gauges", as classically. Unitary many-particle representations are defined, with the correct classical limit. Furthermore, the author identifies a remarkable element Q in the center of Uq(g), which plays the role of a BRST operator in the case of Uq(so(2,3)) at roots of unity, for any spin ≥ 1. The associated ghosts are an intrinsic part of the indecomposable representations. The author shows how to define an involution on algebras of creation and anihilation operators at roots of unity, in an example corresponding to non-identical particles. It is shown how nonabelian gauge fields appear naturally in this framework, without having to define connections on fiber bundles. Integration on Quantum Euclidean space and sphere and on Anti-de Sitter space is studied as well. The author gives a conjecture how Q can be used in general to analyze the structure of indecomposable representations, and to define a new, completely reducible associative (tensor) product of representations at roots of unity, which generalizes the standard "truncated" tensor product as well as many-particle representations.

  6. Glioma cell fate decisions mediated by Dll1-Jag1-Fringe in Notch1 signaling pathway.

    Shi, Xiaofei; Wang, Ruiqi

    2017-09-21

    The Notch family of proteins plays a vital role in determining cell fates, such as proliferation, differentiation, and apoptosis. It has been shown that Notch1 and its ligands, Dll1 and Jag1, are overexpressed in many glioma cell lines and primary human gliomas. The roles of Notch1 in some cancers have been firmly established, and recent data implicate that it plays important roles in glioma cell fate decisions. This paper focuses on devising a specific theoretical framework that incorporates Dll1, Jag1, and Fringe in Notch1 signaling pathway to explore their functional roles of these proteins in glioma cells in the tumorigenesis and progression of human gliomas, and to study how glioma cell fate decisions are modulated by both trans-activation and cis-inhibition. This paper presents a computational model for Notch1 signaling pathway in glioma cells. Based on the bifurcation analysis of the model, we show that how the glioma cell fate decisions are modulated by both trans-activation and cis-inhibition mediated by the Fringe protein, providing insight into the design and control principles of the Notch signaling system and the gliomas. This paper presents a computational model for Notch1 signaling pathway in glioma cells based on intertwined dynamics with cis-inhibition and trans-activation involving the proteins Notch1, Dll1, Jag1, and Fringe. The results show that how the glioma cell fate transitions are performed by the Notch1 signaling. Transition from grade III ∼ IV with significantly high Notch1 to grade I ∼ II with high Notch1, and then to normal cells by repressing the Fringe levels or decreasing the strength of enhancement induced by Fringe.

  7. Control bandwidth improvements in GRAVITY fringe tracker by switching to a synchronous real time computer architecture

    Abuter, Roberto; Dembet, Roderick; Lacour, Sylvestre; di Lieto, Nicola; Woillez, Julien; Eisenhauer, Frank; Fedou, Pierre; Phan Duc, Than

    2016-08-01

    The new VLTI (Very Large Telescope Interferometer) 1 instrument GRAVITY5, 22, 23 is equipped with a fringe tracker16 able to stabilize the K-band fringes on six baselines at the same time. It has been designed to achieve a performance for average seeing conditions of a residual OPD (Optical Path Difference) lower than 300 nm with objects brighter than K = 10. The control loop implementing the tracking is composed of a four stage real time computer system compromising: a sensor where the detector pixels are read in and the OPD and GD (Group Delay) are calculated; a controller receiving the computed sensor quantities and producing commands for the piezo actuators; a concentrator which combines both the OPD commands with the real time tip/tilt corrections offloading them to the piezo actuator; and finally a Kalman15 parameter estimator. This last stage is used to monitor current measurements over a window of few seconds and estimate new values for the main Kalman15 control loop parameters. The hardware and software implementation of this design runs asynchronously and communicates the four computers for data transfer via the Reflective Memory Network3. With the purpose of improving the performance of the GRAVITY5, 23 fringe tracking16, 22 control loop, a deviation from the standard asynchronous communication mechanism has been proposed and implemented. This new scheme operates the four independent real time computers involved in the tracking loop synchronously using the Reflective Memory Interrupts2 as the coordination signal. This synchronous mechanism had the effect of reducing the total pure delay of the loop from 3.5 [ms] to 2.0 [ms] which then translates on a better stabilization of the fringes as the bandwidth of the system is substantially improved. This paper will explain in detail the real time architecture of the fringe tracker in both is synchronous and synchronous implementation. The achieved improvements on reducing the delay via this mechanism will be

  8. Technical Training: Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro

    Monique Duval

    2004-01-01

    Annonce de nouveau cours pour l'environnement d'automatisme Schneider Un nouveau cours sur les environnements d'automatisme Premium et Quantum de Schneider est maintenant offert dans le cadre de l'Enseignement technique du CERN, afin de découvrir le nouvel outil de programmation Unity. Cette formation, mise en place par le GUAPI (Groupe des utilisateurs d'automates programmables industriels du CERN), sera essentiellement technique et pratique, destinée aux automaticiens concepteurs, metteurs en oeuvre, installateurs, intégrateurs et techniciens de bureau d'études. Ce cours est ouvert aux personnes étant déjà capables de développer une application PL7-Pro sur TSX Premium, ou ayant suivi le stage AP571. Objectifs : Maîtriser rapidement les différences fonctionnelles d'Unity-Pro par rapport à PL7-Pro; programmer en PLC TSX Premium sous Unity, et notamment connaître l'ensemble des l...

  9. FIMBRIN1 Is Involved in Lily Pollen Tube Growth by Stabilizing the Actin Fringe[C][W][OA

    Su, Hui; Zhu, Jinsheng; Cai, Chao; Pei, Weike; Wang, Jiaojiao; Dong, Huaijian; Ren, Haiyun

    2012-01-01

    An actin fringe structure in the subapex plays an important role in pollen tube tip growth. However, the precise mechanism by which the actin fringe is generated and maintained remains largely unknown. Here, we cloned a 2606-bp full-length cDNA encoding a deduced 77-kD fimbrin-like protein from lily (Lilium longiflorum), named FIMBRIN1 (FIM1). Ll-FIM1 was preferentially expressed in pollen and concentrated at actin fringe in the subapical region, as well as in longitudinal actin-filament bundles in the shank of pollen tubes. Microinjection of Ll-FIM1 antibody into lily pollen tubes inhibited tip growth and disrupted the actin fringe. Furthermore, we verified the function of Ll-FIM1 in the fim5 mutant of its closest relative, Arabidopsis thaliana. Pollen tubes of fim5 mutants grew with a larger diameter in early stages but could recover into normal forms in later stages, despite significantly slower growth rates. The actin fringe of the fim5 mutants, however, was impaired during both early and late stages. Impressively, stable expression of fim5pro:GFP:Ll-FIM1 rescued the actin fringe and the growth rate of Arabidopsis fim5 pollen tubes. In vitro biochemical analysis showed that Ll-FIM1 could bundle actin filaments. Thus, our study has identified a fimbrin that may stabilize the actin fringe by cross-linking actin filaments into bundles, which is important for proper tip growth of lily pollen tubes. PMID:23150633

  10. Fringe Controls Naïve CD4+T Cells Differentiation through Modulating Notch Signaling in Asthmatic Rat Models

    Gu, Wen; Xu, Weiguo; Ding, Tao; Guo, Xuejun

    2012-01-01

    The ability of Notch signaling to regulate T helper cell development and differentiation has been widely accepted. Fringe, O-fucose-β1,3-N-acetylglucosaminyltransferases modulate Notch receptor expression and promote the Notch signaling pathway through receptor-ligand binding. In this study, we assayed the expression levels of three Fringe homologs in naive CD4+T cells in asthmatic rats. We found that Radical Fringe (Rfng) was highly expressed, whereas both Lunatic Fringe (Lfng) and Manic Fringe (Mfng) were expressed at low levels. Down-regulation of Rfng using siRNA, and overexpression of Lfng or Mfng enhanced Th1 subset lineages and diminished Th2 subset lineages. Notch signaling was more activated in asthmatic naïve CD4+T cells than in control cells, and Lfng, but not Mfng or Rfng, partly inhibited Notch signaling in asthmatic naïve CD4+T lymphocytes. Lfng overexpression resulted in significantly decreased Th2 cytokine production in asthma, which was the same effect as the GSI (γ-secretase inhibitor) treatment alone, but had an increased effect on Th1 cytokines than GSI treatment. Collectively, these data identify the essential role of Fringe modulating naïve CD4+T cells differentiation through Notch signaling. Lfng regulated Th2 cells differentiation via a Notch-dependent manner and Th1 cells differentiation via a Notch-independent manner. Fringe could be a therapeutic strategy for the management and prevention of allergic asthma. PMID:23071776

  11. Fringe controls naïve CD4(+)T cells differentiation through modulating notch signaling in asthmatic rat models.

    Gu, Wen; Xu, Weiguo; Ding, Tao; Guo, Xuejun

    2012-01-01

    The ability of Notch signaling to regulate T helper cell development and differentiation has been widely accepted. Fringe, O-fucose-β1,3-N-acetylglucosaminyltransferases modulate Notch receptor expression and promote the Notch signaling pathway through receptor-ligand binding. In this study, we assayed the expression levels of three Fringe homologs in naive CD4(+)T cells in asthmatic rats. We found that Radical Fringe (Rfng) was highly expressed, whereas both Lunatic Fringe (Lfng) and Manic Fringe (Mfng) were expressed at low levels. Down-regulation of Rfng using siRNA, and overexpression of Lfng or Mfng enhanced Th1 subset lineages and diminished Th2 subset lineages. Notch signaling was more activated in asthmatic naïve CD4(+)T cells than in control cells, and Lfng, but not Mfng or Rfng, partly inhibited Notch signaling in asthmatic naïve CD4(+)T lymphocytes. Lfng overexpression resulted in significantly decreased Th2 cytokine production in asthma, which was the same effect as the GSI (γ-secretase inhibitor) treatment alone, but had an increased effect on Th1 cytokines than GSI treatment. Collectively, these data identify the essential role of Fringe modulating naïve CD4(+)T cells differentiation through Notch signaling. Lfng regulated Th2 cells differentiation via a Notch-dependent manner and Th1 cells differentiation via a Notch-independent manner. Fringe could be a therapeutic strategy for the management and prevention of allergic asthma.

  12. Delineating Urban Fringe Area by Land Cover Information Entropy—An Empirical Study of Guangzhou-Foshan Metropolitan Area, China

    Junyi Huang

    2016-05-01

    Full Text Available Rapid urbanization has caused many environmental problems, such as the heat island effect, intensifying air pollution, pollution from runoff, loss of wildlife habitat, etc. Accurate evaluations of these problems demand an accurate delineation of the spatial extent of the urban fringe. Conceptual and analytical ambiguity of the urban fringe and a general lack of consensus among researchers have made its measurement very difficult. This study reports a compound and reliable method to delineate the urban fringe area using a case study. Based on the 'fringe effect' theory in landscape ecology, the existing land cover information entropy model for defining the urban fringe is renewed by incorporating scale theory, cartography and urban geography theory. Results show that the urban fringe area of Guangzhou and Foshan metropolitan area covers an area of 2031 km2, and it occupies over 31% of the total study area. Result evaluation by industry structure data shows satisfactory correspondence with different land cover types. This paper reports the method and outcome of an attempt to provide an objective, repeatable and generally applicable method for mapping its spatial extent from remote sensing imageries, and could be beneficial to relevant urban studies and urban fringe management projects.

  13. A Self-Powered and Autonomous Fringing Field Capacitive Sensor Integrated into a Micro Sprinkler Spinner to Measure Soil Water Content.

    da Costa, Eduardo Ferreira; de Oliveira, Nestor E; Morais, Flávio J O; Carvalhaes-Dias, Pedro; Duarte, Luis Fernando C; Cabot, Andreu; Siqueira Dias, J A

    2017-03-12

    We present here the design and fabrication of a self-powered and autonomous fringing field capacitive sensor to measure soil water content. The sensor is manufactured using a conventional printed circuit board and includes a porous ceramic. To read the sensor, we use a circuit that includes a 10 kHz triangle wave generator, an AC amplifier, a precision rectifier and a microcontroller. In terms of performance, the sensor's capacitance (measured in a laboratory prototype) increases up to 5% when the volumetric water content of the porous ceramic changed from 3% to 36%, resulting in a sensitivity of S = 15.5 pF per unity change. Repeatability tests for capacitance measurement showed that the θ v sensor's root mean square error is 0.13%. The average current consumption of the system (sensor and signal conditioning circuit) is less than 1.5 μ A, which demonstrates its suitability for being powered by energy harvesting systems. We developed a complete irrigation control system that integrates the sensor, an energy harvesting module composed of a microgenerator installed on the top of a micro sprinkler spinner, and a DC/DC converter circuit that charges a 1 F supercapacitor. The energy harvesting module operates only when the micro sprinkler spinner is irrigating the soil, and the supercapacitor is fully charged to 5 V in about 3 h during the first irrigation. After the first irrigation, with the supercap fully charged, the system can operate powered only by the supercapacitor for approximately 23 days, without any energy being harvested.

  14. A Self-Powered and Autonomous Fringing Field Capacitive Sensor Integrated into a Micro Sprinkler Spinner to Measure Soil Water Content

    Eduardo Ferreira da Costa

    2017-03-01

    Full Text Available We present here the design and fabrication of a self-powered and autonomous fringing field capacitive sensor to measure soil water content. The sensor is manufactured using a conventional printed circuit board and includes a porous ceramic. To read the sensor, we use a circuit that includes a 10 kHz triangle wave generator, an AC amplifier, a precision rectifier and a microcontroller. In terms of performance, the sensor’s capacitance (measured in a laboratory prototype increases up to 5% when the volumetric water content of the porous ceramic changed from 3% to 36%, resulting in a sensitivity of S = 15.5 pF per unity change. Repeatability tests for capacitance measurement showed that the θ v sensor’s root mean square error is 0.13%. The average current consumption of the system (sensor and signal conditioning circuit is less than 1.5 μ A, which demonstrates its suitability for being powered by energy harvesting systems. We developed a complete irrigation control system that integrates the sensor, an energy harvesting module composed of a microgenerator installed on the top of a micro sprinkler spinner, and a DC/DC converter circuit that charges a 1 F supercapacitor. The energy harvesting module operates only when the micro sprinkler spinner is irrigating the soil, and the supercapacitor is fully charged to 5 V in about 3 h during the first irrigation. After the first irrigation, with the supercap fully charged, the system can operate powered only by the supercapacitor for approximately 23 days, without any energy being harvested.

  15. Global unity.

    Holleran

    1993-02-24

    the headquarters of the International Council of Nurses in Geneva, Switzerland, is part of a new building near the lake. There are 17 staff members and only four of us are nurses, yet we have a pretty productive team.

  16. 3D palmprint and hand imaging system based on full-field composite color sinusoidal fringe projection technique.

    Zhang, Zonghua; Huang, Shujun; Xu, Yongjia; Chen, Chao; Zhao, Yan; Gao, Nan; Xiao, Yanjun

    2013-09-01

    Palmprint and hand shape, as two kinds of important biometric characteristics, have been widely studied and applied to human identity recognition. The existing research is based mainly on 2D images, which lose the third-dimensional information. The biological features extracted from 2D images are distorted by pressure and rolling, so the subsequent feature matching and recognition are inaccurate. This paper presents a method to acquire accurate 3D shapes of palmprint and hand by projecting full-field composite color sinusoidal fringe patterns and the corresponding color texture information. A 3D imaging system is designed to capture and process the full-field composite color fringe patterns on hand surface. Composite color fringe patterns having the optimum three fringe numbers are generated by software and projected onto the surface of human hand by a digital light processing projector. From another viewpoint, a color CCD camera captures the deformed fringe patterns and saves them for postprocessing. After compensating for the cross talk and chromatic aberration between color channels, three fringe patterns are extracted from three color channels of a captured composite color image. Wrapped phase information can be calculated from the sinusoidal fringe patterns with high precision. At the same time, the absolute phase of each pixel is determined by the optimum three-fringe selection method. After building up the relationship between absolute phase map and 3D shape data, the 3D palmprint and hand are obtained. Color texture information can be directly captured or demodulated from the captured composite fringe pattern images. Experimental results show that the proposed method and system can yield accurate 3D shape and color texture information of the palmprint and hand shape.

  17. A kinetic model of droplet heating and evaporation: Effects of inelastic collisions and a non-unity evaporation coefficient

    Sazhin, Sergei S.; Xie, Jianfei; Shishkova, Irina N.; Elwardani, Ahmed Elsaid; Heikal, Morgan Raymond

    2013-01-01

    The previously developed kinetic model for droplet heating and evaporation into a high pressure air is generalised to take into account the combined effects of inelastic collisions between molecules in the kinetic region, a non-unity evaporation

  18. Conflict Resolution in Africa: Challenges for the International Community, The Organization of African Unity and the Sub- Regional Groups

    Wamala, Edward

    2000-01-01

    .... It will discuss in detail the common causes of the conflicts, highlight the roles of external players, the challenges and roles of the international community, the Organization of African Unity (OAU...

  19. A single-phase PWM controlled AC to DC converter based on control of unity displacement power factor

    Funabiki, Shigeyuki

    1990-01-01

    A modified pulse-width modulation (PWM) technique that improves the displacement power factor and the input power factor of a single-phase AC to DC converter is discussed. The modified converter is shown to have a high input power factor and allows the of DC voltage from zero to more than the maximum value of the source voltage. The displacement power factor is unity, and the input power factor is almost unity in the wide range of current command

  20. Understanding and Approaching Muslim Visibilities

    Schmidt, Garbi

    2011-01-01

    Within Western nation-states such as Denmark, Islamic identities are often seen as inherently and divergently visible, an aspect that some argue is detrimental to the secular nation-state. From a research perspective, one way to nuance this position is by focusing on groups of 'invisible' Muslims...

  1. Early Learning Theories Made Visible

    Beloglovsky, Miriam; Daly, Lisa

    2015-01-01

    Go beyond reading about early learning theories and see what they look like in action in modern programs and teacher practices. With classroom vignettes and colorful photographs, this book makes the works of Jean Piaget, Erik Erikson, Lev Vygotsky, Abraham Maslow, John Dewey, Howard Gardner, and Louise Derman-Sparks visible, accessible, and easier…

  2. Non-Euclidean visibility problems

    FERNANDO CHAMIZO. Departamento de Matemáticas, Facultad de Ciencias, Universidad Autónoma de Madrid, 28049 Madrid, Spain. MS received 14 November 2005. Abstract. We consider the analog of visibility problems in hyperbolic plane (repre- sented by Poincaré half-plane model H), replacing the standard lattice Z ...

  3. Are naked singularities really visible

    Calvani, M [Padua Univ. (Italy). Ist. di Astronomia; De Felice, F [Alberta Univ., Edmonton (Canada); Nobili, L [Padua Univ. (Italy). Ist. di Fisica

    1978-12-09

    The question whether a Kerr naked singularity is actually visible from infinity is investigated; it is shown that in fact any signal which could be emitted from the singularity is infinitely red-shifted. This implies that naked singularities would be indistinguishable from a black hole.

  4. Visible Machine Learning for Biomedicine.

    Yu, Michael K; Ma, Jianzhu; Fisher, Jasmin; Kreisberg, Jason F; Raphael, Benjamin J; Ideker, Trey

    2018-06-14

    A major ambition of artificial intelligence lies in translating patient data to successful therapies. Machine learning models face particular challenges in biomedicine, however, including handling of extreme data heterogeneity and lack of mechanistic insight into predictions. Here, we argue for "visible" approaches that guide model structure with experimental biology. Copyright © 2018. Published by Elsevier Inc.

  5. A New Facility for Testing Superconducting Solenoid Magnets with Large Fringe Fields at Fermilab

    Orris, D. [Fermilab; Carcagno, R. [Fermilab; Nogiec, J. [Fermilab; Rabehl, R. [Fermilab; Sylvester, C. [Fermilab; Tartaglia, M. [Fermilab

    2013-09-01

    Testing superconducting solenoid with no iron flux return can be problematic for a magnet test facility due to the large magnetic fringe fields generated. These large external fields can interfere with the operation of equipment while precautions must be taken for personnel supporting the test. The magnetic forces between the solenoid under test and the external infrastructure must also be taken under consideration. A new test facility has been designed and built at Fermilab specifically for testing superconducting magnets with large external fringe fields. This paper discusses the test stand design, capabilities, and details of the instrumentation and controls with data from the first solenoid tested in this facility: the Muon Ionization Cooling Experiment (MICE) coupling coil.

  6. Quantization error of CCD cameras and their influence on phase calculation in fringe pattern analysis.

    Skydan, Oleksandr A; Lilley, Francis; Lalor, Michael J; Burton, David R

    2003-09-10

    We present an investigation into the phase errors that occur in fringe pattern analysis that are caused by quantization effects. When acquisition devices with a limited value of camera bit depth are used, there are a limited number of quantization levels available to record the signal. This may adversely affect the recorded signal and adds a potential source of instrumental error to the measurement system. Quantization effects also determine the accuracy that may be achieved by acquisition devices in a measurement system. We used the Fourier fringe analysis measurement technique. However, the principles can be applied equally well for other phase measuring techniques to yield a phase error distribution that is caused by the camera bit depth.

  7. Real-time determination of fringe pattern frequencies: An application to pressure measurement

    Sciammarella, Cesar A.; Piroozan, Parham

    2007-05-01

    Retrieving information in real time from fringe patterns is a topic of a great deal of interest in scientific and engineering applications of optical methods. This paper presents a method for fringe frequency determination based on the capability of neural networks to recognize signals that are similar but not identical to signals used to train the neural network. Sampled patterns are generated by calibration and stored in memory. Incoming patterns are analyzed by a back-propagation neural network at the speed of the recording device, a CCD camera. This method of information retrieval is utilized to measure pressures on a boundary layer flow. The sensor combines optics and electronics to analyze dynamic pressure distributions and to feed information to a control system that is capable to preserve the stability of the flow.

  8. Rainbow fringes around crevice corrosion formed on stainless steel AISI 316 after ennoblement in seawater

    Wang, W.; Zhang, X. [College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao (China); Wang, J. [College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao (China); State Key Laboratory for Corrosion and Protection, Shenyang (China)

    2009-10-15

    The crevice corrosion occurrence probability of stainless steel (SS) AISI 316 was increased under ennoblement condition due to chemically added H{sub 2}O{sub 2} into seawater. The H{sub 2}O{sub 2} was used to simulate the important factor causing ennoblement in natural marine biofilm. Morphology of the crevice corrosion was observed using an incident-light source microscopy. Some interesting ''rainbow'' fringes were observed around micro-crevices. The mechanism was discussed from the ions diffusion and potential distribution during the crevice formation. This result shows that under ennoblement condition the colored fringe is a distinct characteristic of the morphology of localized corrosion for stainless steel. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  9. EFFECT OF DIGITAL FRINGE PROJECTION PARAMETERS ON 3D RECONSTRUCTION ACCURACY

    A. Babaei

    2013-09-01

    This paper aims to evaluate different parameters which affect the accuracy of the final results. For this purpose, some test were designed and implemented. These tests assess the number of phase shifts, spatial frequency of the fringe pattern, light condition, noise level of images, and the color and material of target objects on the quality of resulted phase map. The evaluation results demonstrate that digital fringe projection method is capable of obtaining depth map of complicated object with high accuracy. The contrast test results showed that this method is able to work under different ambient light condition; although at places with high light condition will not work properly. The results of implementation on different objects with various materials, color and shapes demonstrate the high capability of this method of 3D reconstruction.

  10. Double-resolution electron holography with simple Fourier transform of fringe-shifted holograms.

    Volkov, V V; Han, M G; Zhu, Y

    2013-11-01

    We propose a fringe-shifting holographic method with an appropriate image wave recovery algorithm leading to exact solution of holographic equations. With this new method the complex object image wave recovered from holograms appears to have much less traditional artifacts caused by the autocorrelation band present practically in all Fourier transformed holograms. The new analytical solutions make possible a double-resolution electron holography free from autocorrelation band artifacts and thus push the limits for phase resolution. The new image wave recovery algorithm uses a popular Fourier solution of the side band-pass filter technique, while the fringe-shifting holographic method is simple to implement in practice. Published by Elsevier B.V.

  11. Fringe field interference of neighbor magnets in China spallation neutron source

    Li, L.; Kang, W.; Wu, X.; Deng, C.D.; Li, S.; Yang, M.; Zhou, J.X.; Liu, Y.Q.; Wu, Y.W.

    2016-01-01

    In CSNS accelerator construction, the field measurement of all RCS magnets have been finished and the magnets have been installed in the tunnel before the end of 2015. The electromagnetic quadrupoles have a large aperture and the core-to-core distance between magnets is rather short in some places. The corrector magnet or the sextupole magnet is closer to one of the quadrupole magnets which caused certain interference. The interference caused by magnetic fringe field has been appeared and it becomes a significant issue in beam dynamics for beam loss control in this high-intensity proton accelerator. We have performed 3D computing simulations to study integral field distributions between the quadrupole and the corrector magnets, and the sextupole and the other quadrupole magnets. The effect of the magnetic fringe field and the interference has been investigated with different distances of the neighbor magnets. The simulation and the field measurement results will be introduced in this paper.

  12. A fringe projector-based study of the Brighter-Fatter Effect in LSST CCDs

    Gilbertson, W.; Nomerotski, A.; Takacs, P.

    2017-09-01

    To achieve the goals of the Large Synoptic Survey Telescope for Dark Energy science requires a detailed understanding of CCD sensor effects. One such sensor effect is the Point Spread Function (PSF) increasing with flux, alternatively called the `Brighter-Fatter Effect.' In this work a novel approach was tested to perform the PSF measurements in the context of the Brighter-Fatter Effect employing a Michelson interferometer to project a sinusoidal fringe pattern onto the CCD. The Brighter-Fatter effect predicts that the fringe pattern should become asymmetric in the intensity pattern as the brighter peaks corresponding to a larger flux are smeared by a larger PSF. By fitting the data with a model that allows for a changing PSF, the strength of the Brighter-Fatter effect can be evaluated.

  13. Polarization modeling and predictions for DKIST part 3: focal ratio and thermal dependencies of spectral polarization fringes and optic retardance

    Harrington, David M.; Sueoka, Stacey R.

    2018-01-01

    Data products from high spectral resolution astronomical polarimeters are often limited by fringes. Fringes can skew derived magnetic field properties from spectropolarimetric data. Fringe removal algorithms can also corrupt the data if the fringes and object signals are too similar. For some narrow-band imaging polarimeters, fringes change the calibration retarder properties and dominate the calibration errors. Systems-level engineering tools for polarimetric instrumentation require accurate predictions of fringe amplitudes, periods for transmission, diattenuation, and retardance. The relevant instabilities caused by environmental, thermal, and optical properties can be modeled and mitigation tools developed. We create spectral polarization fringe amplitude and temporal instability predictions by applying the Berreman calculus and simple interferometric calculations to optics in beams of varying F/ number. We then apply the formalism to superachromatic six-crystal retarders in converging beams under beam thermal loading in outdoor environmental conditions for two of the world's largest observatories: the 10-m Keck telescope and the Daniel K. Inouye Solar Telescope (DKIST). DKIST will produce a 300-W optical beam, which has imposed stringent requirements on the large diameter six-crystal retarders, dichroic beamsplitters, and internal optics. DKIST retarders are used in a converging beam with F/ ratios between 8 and 62. The fringe spectral periods, amplitudes, and thermal models of retarder behavior assisted DKIST optical designs and calibration plans with future application to many astronomical spectropolarimeters. The Low Resolution Imaging Spectrograph with polarimetry instrument at Keck also uses six-crystal retarders in a converging F / 13 beam in a Cassegrain focus exposed to summit environmental conditions providing observational verification of our predictions.

  14. Actors and processes behind urban fringe development: Mechanism to guide urban land management. Study on Dhaka, Bangladesh

    Masum, Fahria

    2009-01-01

    This thesis has attempted to analyze and resolve urban fringe problems in Dhaka by incorporating different roles and interests of actors in land development processes. The research has revealed that these different actors have different interests, norms and ideologies which are playing an active role in guiding or regulating urban land development process. This situation is deploying existing rules and regulations in form of politics and affecting urban fringe management negatively. The resea...

  15. Record number (11 000) of interference fringes obtained by a 1 MV field-emission electron microscope

    Akashi, Tetsuya; Harada, Ken; Matsuda, Tsuyoshi; Kasai, Hiroto; Tonomura, Akira; Furutsu, Tadao; Moriya, Noboru; Yoshida, Takaho; Kawasaki, Takeshi; Kitazawa, Koichi; Koinuma, Hideomi

    2002-01-01

    An electron biprism for a 1 million-volt field-emission electron microscope was developed. This biprism is controlled similarly as a specimen holder so that it can be driven and rotated precisely and is tough against mechanical vibration and stray magnetic field. We recorded the maximum number of interference fringes by using this biprism in order to confirm the overall performance as a holography electron microscope, and obtained a world record of 11,000 interference fringes

  16. Fast in-situ tool inspection based on inverse fringe projection and compact sensor heads

    Matthias, Steffen; Kästner, Markus; Reithmeier, Eduard

    2016-11-01

    Inspection of machine elements is an important task in production processes in order to ensure the quality of produced parts and to gather feedback for the continuous improvement process. A new measuring system is presented, which is capable of performing the inspection of critical tool geometries, such as gearing elements, inside the forming machine. To meet the constraints on sensor head size and inspection time imposed by the limited space inside the machine and the cycle time of the process, the measuring device employs a combination of endoscopy techniques with the fringe projection principle. Compact gradient index lenses enable a compact design of the sensor head, which is connected to a CMOS camera and a flexible micro-mirror based projector via flexible fiber bundles. Using common fringe projection patterns, the system achieves measuring times of less than five seconds. To further reduce the time required for inspection, the generation of inverse fringe projection patterns has been implemented for the system. Inverse fringe projection speeds up the inspection process by employing object-adapted patterns, which enable the detection of geometry deviations in a single image. Two different approaches to generate object adapted patterns are presented. The first approach uses a reference measurement of a manufactured tool master to generate the inverse pattern. The second approach is based on a virtual master geometry in the form of a CAD file and a ray-tracing model of the measuring system. Virtual modeling of the measuring device and inspection setup allows for geometric tolerancing for free-form surfaces by the tool designer in the CAD-file. A new approach is presented, which uses virtual tolerance specifications and additional simulation steps to enable fast checking of metric tolerances. Following the description of the pattern generation process, the image processing steps required for inspection are demonstrated on captures of gearing geometries.

  17. Self-correction of projector nonlinearity in phase-shifting fringe projection profilometry.

    Lü, Fuxing; Xing, Shuo; Guo, Hongwei

    2017-09-01

    In phase-shifting fringe projection profilometry, the luminance nonlinearity of the used projector has been recognized as one of the most crucial factors decreasing the measurement accuracy. To solve this problem, this paper presents a self-correcting technique that allows us to suppress the effect of the projector nonlinearity in the absence of any calibration data regarding the projector intensities or regarding the phase errors. In its first step, the standard phase-shifting algorithm is used to recover the phases, as well as the background intensities and the modulations. Using these results enables normalizing the fringe patterns, for ridding them of the effects of the background and modulations. Second, we smooth the calculated phase map by use of a low-pass filter in order to remove the ripple-like phase errors induced by the projector nonlinearity. Third, we determine a polynomial representing the projector nonlinearity by fitting the curve of the normalized fringe intensities against the cosine values of the smoothed phases. Finally, we correct the phase errors using the curve just obtained. Doing these steps in an iterative way eventually results in a phase map and, further, a 3D shape with their artifacts induced by the projector nonlinearity suppressed significantly. Experimental results demonstrate that this technique offers some advantages over others. It does not require a prior calibration of the projector, thus being suitable for dealing with a time-variant nonlinearity; its pointwise operation protects the edges and details of the measurement results from being blurred; and it works well with very few fringe patterns and is efficient in image capturing.

  18. Lunatic, Manic and Radical Fringe Each Promote T and B Cell Development

    Song, Yinghui; Kumar, Vivek; Wei, Hua-Xing; Qiu, Ju; Stanley, Pamela

    2015-01-01

    Lunatic, Manic and Radical Fringe (LFNG, MFNG and RFNG) are N-acetylglucosaminyltransferases that modify Notch receptors and regulate Notch signaling. Loss of LFNG affects thymic T cell development and LFNG and MFNG are required for marginal zone (MZ) B cell development. However, roles for MFNG and RFNG in T cell development, RFNG in B cell development, or Fringes in T and B cell activation, are not identified. Here we show that Lfng/Mfng/Rfng triple knockout (Fng tKO) mice exhibited reduced binding of DLL4 Notch ligand to CD4/CD8 double-negative (DN) T cell progenitors, and reduced expression of NOTCH1 targets Deltex1 and CD25. Fng tKO mice had reduced frequencies of DN1/cKit+ and DN2 T cell progenitors and CD4+CD8+ double positive (DP) T cell precursors, but increased frequencies of CD4+ and CD8+ single positive (SP) T cells in thymus. In spleen, Fng tKO mice had reduced frequencies of CD4+, CD8+, central memory T cells and marginal zone (MZ) B cells, and an increased frequency of effector memory T cells, neutrophils, follicular (Fo) and MZ P B cells. The Fng tKO phenotype was cell-autonomous and largely rescued in mice expressing one allele of a single Fng gene. Stimulation of Fng tKO splenocytes with anti-CD3/CD28 beads or lipopolysaccharide gave reduced proliferation compared to controls, and the generation of activated T cells by concanavalin A or L-PHA was also reduced in Fng tKO mice. Therefore, each Fringe contributes to T and B cell development, and Fringe is required for optimal in vitro stimulation of T and B cells. PMID:26608918

  19. Biodegradation of phenol, salicylic acid, benzenesulfonic acid, and iomeprol by Pseudomonas fluorescens in the capillary fringe.

    Hack, Norman; Reinwand, Christian; Abbt-Braun, Gudrun; Horn, Harald; Frimmel, Fritz H

    2015-12-01

    Mass transfer and biological transformation phenomena in the capillary fringe were studied using phenol, salicylic acid, benzenesulfonic acid, and the iodinated X-ray contrast agent iomeprol as model organic compounds and the microorganism strain Pseudomonas fluorescens. Three experimental approaches were used: Batch experiments (uniform water saturation and transport by diffusion), in static columns (with a gradient of water saturation and advective transport in the capillaries) and in a flow-through cell (with a gradient of water saturation and transport by horizontal and vertical flow: 2-dimension flow-through microcosm). The reactors employed for the experiments were filled with quartz sand of defined particle size distribution (dp=200...600 μm, porosity ε=0.42). Batch experiments showed that phenol and salicylic acid have a high, whereas benzenesulfonic acid and iomeprol have a quite low potential for biodegradation under aerobic conditions and in a matrix nearly close to water saturation. Batch experiments under anoxic conditions with nitrate as electron acceptor revealed that the biodegradation of the model compounds was lower than under aerobic conditions. Nevertheless, the experiments showed that the moisture content was also responsible for an optimized transport in the liquid phase of a porous medium. Biodegradation in the capillary fringe was found to be influenced by both the moisture content and availability of the dissolved substrate, as seen in static column experiments. The gas-liquid mass transfer of oxygen also played an important role for the biological activity. In static column experiments under aerobic conditions, the highest biodegradation was found in the capillary fringe (e.g. βt/β0 (phenol)=0 after t=6 d) relative to the zone below the water table and unsaturated zone. The highest biodegradation occurred in the flow-through cell experiment where the height of the capillary fringe was largest. Copyright © 2015 Elsevier B.V. All rights

  20. 3D shape measurement of automotive glass by using a fringe reflection technique

    Skydan, O. A.; Lalor, M. J.; Burton, D. R.

    2007-01-01

    In automotive and glass making industries, there is a need for accurately measuring the 3D shapes of reflective surfaces to speed up and ensure product development and manufacturing quality by using non-contact techniques. This paper describes a technique for the measurement of non-full-field reflective surfaces of automotive glass by using a fringe reflection technique. Physical properties of the measurement surfaces do not allow us to apply optical geometries used in existing techniques for surface measurement based upon direct fringe pattern illumination. However, this property of surface reflectivity can be used to implement similar ideas from existing techniques in a new improved method. In other words, the reflective surface can be used as a mirror to reflect illuminated fringe patterns onto a screen behind. It has been found that in the case of implementing the reflective fringe technique, the phase-shift distribution depends not only on the height of the object but also on the slope at each measurement point. This requires the solving of differential equations to find the surface slope and height distributions in the x and y directions and development of the additional height reconstruction algorithms. The main focus has been made on developing a mathematical model of the optical sub-system and discussing ways for its practical implementation including calibration procedures. A number of implemented image processing algorithms for system calibration and data analysis are discussed and two experimental results are given for automotive glass surfaces with different shapes and defects. The proposed technique showed the ability to provide accurate non-destructive measurement of 3D shapes of the reflective automotive glass surfaces and can be used as a key element for a glass shape quality control system on-line or in a laboratory environment.