WorldWideScience

Sample records for units operations cranes

  1. Speed-sensing device aids crane operators

    Science.gov (United States)

    1964-01-01

    So that crane operators can judge payload movements accurately, a friction-driven multilobed cam device energizes a buzzer and indicator lamp in the crane cab. The signal frequency of this speed sensor has a sensitivity to hoist movement of 1/8 inch.

  2. [Vibration-protective seats for female operators of bridge cranes].

    Science.gov (United States)

    Chadova, M I; Gorokhov, R A; Kopnov, N A

    1990-01-01

    General vibration (GV) is regarded as one of the most unfavourable health related factors of the working conditions of female hosting crane operators in machine producing industries. To eliminate the unhealthy consequences of GV, a newly designed vibroprotected chair was introduced (lic. No 1323429), which ensured a GV decrease down to the level envisaged by the standard norms GOST 12.1.012-78. Small in size, easy to handle, compatible with other serially produced units, the newly designed chair is recommended for wide use in hosting crane production.

  3. 78 FR 27913 - Revision of Crane Regulation Standards for Mobile Offshore Drilling Units (MODUs), Offshore...

    Science.gov (United States)

    2013-05-13

    ... technologies for the operation, maintenance, design, and construction of cranes used on Mobile Offshore... SECURITY Coast Guard 46 CFR Parts 107, 108, and 109 RIN 1625-AB78 Revision of Crane Regulation Standards for Mobile Offshore Drilling Units (MODUs), Offshore Supply Vessels (OSVs), and Floating...

  4. Operator in-the-loop control of rotary cranes

    Energy Technology Data Exchange (ETDEWEB)

    Parker, G.G.; Robinett, R.D.; Driessen, B.J.; Dohrmann, C.R.

    1996-03-01

    An open-loop control method is presented for reducing the oscillatory motion of rotary crane payloads during operator commanded maneuvers. A typical rotary crane consists of a multiple degree-of-freedom platform for positioning a spherical pendulum with an attached payload. The crane operator positions the Payload by issuing a combination of translational and rotational commands to the platform as well as load-line length changes. Frequently, these pendulum modes are time-varying and exhibit low natural frequencies. Maneuvers are therefore performed at rates sufficiently slow so as not to excite oscillation. The strategy presented here generates crane commands which suppress vibration of the payload without a priori knowledge of the desired maneuver. Results are presented for operator in-the-loop positioning using a real-time dynamics simulation of a three-axis rotary crane where the residual sway magnitude is reduced in excess of 4OdB.

  5. Operation and maintenance techniques of cranes and Hoist in IMEF

    Energy Technology Data Exchange (ETDEWEB)

    Soong, Woong Sup; Oh, Yon Woo; Ahn, Sang Bock; Park, Dae Gue; Whang, Ryoung Wha

    1999-07-01

    Crane and hoist of 11 sets are installed int the Irradiated Material Examination Facility (IMEF). IMEF is divided into two parts such as hot cell area and service area. 30/5-ton overhead crane is installed in service area for transfer of irradiated material transportation cask and other several kinds of heavy equipment. This report describes maintenance techniques, repair procedure, daily and special checking list, which will ensure safety in routine operation and even in abnormality. (author). 8 refs.

  6. Swing-Free Cranes via Input Shaping of Operator Commands

    Energy Technology Data Exchange (ETDEWEB)

    Groom, Kenneth N.; Parker, Gordon G.; Robinett, Rush D.; Leban, Frank

    1999-08-25

    This paper presents an open-loop control method for suppressing payload oscillation or swing caused by operator commanded maneuvers in rotary boom cranes and the method is experimentally verified on a one-sixteenth scale model of a Hagglunds shipboard crane. The crane configuration consists of a payload mass that swings like a spherical pendulum on the end of a lift-line which is attached to a boom capable of hub rotation (slewing) and elevation (luffing). Positioning of the payload is accomplished through the hub and boom angles and the load-line length. Since the configuration of the crane affects the excitation and response of the payload, the swing control scheme must account for the varying geometry of the system. Adaptive forward path command filters are employed to remove components of the command signal which induce payload swing.

  7. A statistical model of operational impacts on the framework of the bridge crane

    Science.gov (United States)

    Antsev, V. Yu; Tolokonnikov, A. S.; Gorynin, A. D.; Reutov, A. A.

    2017-02-01

    The technical regulations of the Customs Union demands implementation of the risk analysis of the bridge cranes operation at their design stage. The statistical model has been developed for performance of random calculations of risks, allowing us to model possible operational influences on the bridge crane metal structure in their various combination. The statistical model is practically actualized in the software product automated calculation of risks of failure occurrence of bridge cranes.

  8. Conflicts between sandhill cranes and farmers in the western United States: evolving issues and solutions

    Science.gov (United States)

    Austin, Jane E.

    2012-01-01

    The main conflicts between Sandhill Cranes (Grus canadensis) and farmers in western United States occur in the Rocky Mountain region during migration and wintering periods. Most crop damage by cranes occurs in mature wheat (Triticum aestivum) and barley (Hordeum vulgare), young shoots of alfalfa (Medicago sativa) and cereal grains, chilies (Capsicum annuum), and silage corn (Zea mays). Damage is related to proximity of crop fields to roost sites and timing of crane concentrations relative to crop maturity or vulnerability. The evolution of conflicts between farmers and cranes and current solutions are described for two areas of the Rocky Mountains used by staging, migrating, or wintering cranes: Grays Lake, Idaho, and the Middle Rio Grande Valley, New Mexico. In both areas, conflicts with growing crane populations were aggravated by losses of wetlands and cropland, proximity of crops to roosts and other wetland areas, changing crop types and practices, and increasing urbanization. At Grays Lake, fall-staging cranes damaged barley fields near an important breeding refuge as well as fields 15-50 km away. In the Middle Rio Grande Valley, migrating and wintering cranes damaged young alfalfa fields, chilies, and silage corn. Solutions in both areas have been addressed through cooperative efforts among federal and state agencies, that manage wetlands and croplands to increase food availability and carrying capacity on public lands, provide hazing programs for private landowners, and strategically target crane hunting to problem areas. Sustaining the success of these programs will be challenging. Areas important to Sandhill Cranes in the western United Sates experience continued loss of habitat and food resources due to urbanization, changes in agricultural crops and practices, and water-use conflicts, which threaten the abilities of both public and private landowners to manage wetlands and croplands for cranes. Conservation of habitats and water resources are important

  9. Operable Units

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset consists of operable unit data from multiple Superfund sites in U.S. EPA Region 8. These data were acquired from multiple sources at different times and...

  10. Crane handbook

    CERN Document Server

    Dickie, D E

    1975-01-01

    Crane Handbook offers extensive advice on how to properly handle a crane. The handbook highlights various safety requirements and rules. The aim of the book is to improve the readers' crane operating skills, which could eventually make the book a standard working guide for training operators. The handbook first reminds the readers that the machine should be carefully tested by a regulatory board before use. The text then notes that choosing the right crane for a particular job is vital and explains why this is the case. It then discusses how well-equipped and durable the crane should be. T

  11. Measurement and Modeling of Job Stress of Electric Overhead Traveling Crane Operators

    Science.gov (United States)

    Krishna, Obilisetty B.; Maiti, Jhareswar; Ray, Pradip K.; Samanta, Biswajit; Mandal, Saptarshi; Sarkar, Sobhan

    2015-01-01

    Background In this study, the measurement of job stress of electric overhead traveling crane operators and quantification of the effects of operator and workplace characteristics on job stress were assessed. Methods Job stress was measured on five subscales: employee empowerment, role overload, role ambiguity, rule violation, and job hazard. The characteristics of the operators that were studied were age, experience, body weight, and body height. The workplace characteristics considered were hours of exposure, cabin type, cabin feature, and crane height. The proposed methodology included administration of a questionnaire survey to 76 electric overhead traveling crane operators followed by analysis using analysis of variance and a classification and regression tree. Results The key findings were: (1) the five subscales can be used to measure job stress; (2) employee empowerment was the most significant factor followed by the role overload; (3) workplace characteristics contributed more towards job stress than operator's characteristics; and (4) of the workplace characteristics, crane height was the major contributor. Conclusion The issues related to crane height and cabin feature can be fixed by providing engineering or foolproof solutions than relying on interventions related to the demographic factors. PMID:26929839

  12. The effect of joystick handle size and gain at two levels of required precision on performance and physical load on crane operators

    NARCIS (Netherlands)

    Huysmans, M.A.; Looze, M.P. de; Hoozemans, M.J.M.; Beek, A.J. van der; Dieën, J.H. van

    2006-01-01

    The study was designed to determine the effect of joystick handle size and (display-control) gain at two levels of required task precision on performance and physical load on crane operators. Eight experienced crane operators performed a simulated crane operation task on a computer by use of a joyst

  13. 46 CFR 108.601 - Crane design.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Crane design. 108.601 Section 108.601 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Cranes Cranes § 108.601 Crane design. (a) Each crane and crane foundation on a unit must be designed...

  14. Optimal Manoeuvres of Underactuated Linear Mechanical Systems: The Case of Controlling Gantry Crane Operations

    Directory of Open Access Journals (Sweden)

    S. Woods

    2014-01-01

    Full Text Available A method of solving optimal manoeuvre control of linear underactuated mechanical systems is presented. The nonintegrable constraints present in such systems are handled by adding dummy actuators and then by applying Lagrange multipliers to reduce their action to zero. The open- and closed-loop control schemes can be analyzed. The method, referred to as the constrained modal space optimal control (CMSOC, is illustrated in the examples of gantry crane operations.

  15. Optimal Manoeuvres of Underactuated Linear Mechanical Systems: The Case of Controlling Gantry Crane Operations

    OpenAIRE

    Woods, S; Szyszkowski, W.

    2014-01-01

    A method of solving optimal manoeuvre control of linear underactuated mechanical systems is presented. The nonintegrable constraints present in such systems are handled by adding dummy actuators and then by applying Lagrange multipliers to reduce their action to zero. The open- and closed-loop control schemes can be analyzed. The method, referred to as the constrained modal space optimal control (CMSOC), is illustrated in the examples of gantry crane operations.

  16. Wave Synchronizing Crane Control during Water Entry in Offshore Moonpool Operations - Experimental Results

    OpenAIRE

    2004-01-01

    A new strategy for active control in heavy-lift offshore crane operations is suggested, by introducing a new concept referred to as wave synchronization. Wave synchronization reduces the hydrodynamic forces by minimization of variations in the relative vertical velocity between payload and water using a wave amplitude measurement. Wave synchronization is combined with conventional active heave compensation to obtain accurate control. Experimental results using a scale model of a semi-submerge...

  17. Forward and Reverse Motoring of DC Hoist Motor on Container Crane (CC Operation

    Directory of Open Access Journals (Sweden)

    Rukmini

    2015-03-01

    Full Text Available Container cranes (CC become the highest electric energy consumption equipment in container terminal. Therefore it is important to study and analyze the hoist motor as the largest motor on container crane operation to look for opportunities in use energy efficiently. Lifting and lowering the container as the fixed operation of CC. Lifting the container as forward operating of hoist motor and lowering the container as reverse operating of hoist motor. The type of DC motor have used to modelling. Simulink (one of Matlab toolboxes was used to model the forward and reverse of DC hoist motor. When lifting the container (forward motoring, the current required depends on the applied load torque. But when lowering the containers (reverse motoring, the voltage generated by the engine polarity reverse is determined by the downward movement of containers (mass and height. Reverse the polarity, and let the motor functions as a generator, produces a current and then the potential energy was calculated. Conclusions were drawn at the end of the paper.

  18. Crane. Incidental Classroom Instruction 20295

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, Richard Jennings [Los Alamos National Laboratory

    2016-04-01

    The purpose of this course is to introduce safe hoisting and rigging practices to personnel who are attempting to become LANL incidental crane operators and to review and refresh safe hoisting and rigging practices with existing incidental crane operators.

  19. Control of Rotary Cranes Using Fuzzy Logic

    Directory of Open Access Journals (Sweden)

    Amjed A. Al-mousa

    2003-01-01

    Full Text Available Rotary cranes (tower cranes are common industrial structures that are used in building construction, factories, and harbors. These cranes are usually operated manually. With the size of these cranes becoming larger and the motion expected to be faster, the process of controlling them has become difficult without using automatic control methods. In general, the movement of cranes has no prescribed path. Cranes have to be run under different operating conditions, which makes closed-loop control attractive.

  20. Slewing crane with electromagnet

    OpenAIRE

    2006-01-01

    This paper describes a slewing crane with electromagnet, operated by three three-phase induction motors. A switchboard described in a separate paper, which also depicts the electromagnet construction details, drives the motors and the electromagnet. From its seat – mounted on the crane - an operator can make the crane arm slew left or right. The electromagnet can be moved back, forward, up or down. The crane is made of iron, has a height of 3m and a length of 2,5m. Such proportions make it ve...

  1. Wave Synchronizing Crane Control during Water Entry in Offshore Moonpool Operations - Experimental Results

    Directory of Open Access Journals (Sweden)

    Tor A. Johansen

    2004-01-01

    Full Text Available A new strategy for active control in heavy-lift offshore crane operations is suggested, by introducing a new concept referred to as wave synchronization. Wave synchronization reduces the hydrodynamic forces by minimization of variations in the relative vertical velocity between payload and water using a wave amplitude measurement. Wave synchronization is combined with conventional active heave compensation to obtain accurate control. Experimental results using a scale model of a semi-submerged vessel with a moonpool shows that wave synchronization leads to significant improvements in performance. Depending on the sea state and payload, the results indicate that the reduction in the standard deviation of the wire tension may be up to 50

  2. Operable Unit Boundaries

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset consists of operable unit data from multiple Superfund sites in U.S. EPA Region 8. These data were acquired from multiple sources at different times and...

  3. 基于作业均衡的集装箱堆场箱区场桥作业调度%Container Yard Crane Scheduling for Operations Balance Between Yard Cranes

    Institute of Scientific and Technical Information of China (English)

    赵磊; 胡志华; 李淑琴

    2013-01-01

    In order to improve the balance degree of container yard crane operations and operators, and then to increase the utilization rate of operation resources, a yard crane scheduling problem was proposed to balance yard cranes for blocks. According to the characteristics of operations and relationship among them, a container yard crane scheduling model was built to balance the quantities of yard cranes and operational time between blocks. A genetic algorithm was designed to solve the model. Through the design of assessment criteria of balance degree, the balance degree that was the most improved was obtained by analyzing the relationship between equilibrium goal and its solutions. Finally, through changing the input of yard crane quantity, the relationship between the quantity of yard cranes and balance degree was found, which provided theoretical basis for determining the quantities of container yard cranes and scheduling container yard cranes.%为了提高集装箱堆场场桥作业量分布的均衡性,进而提高作业人员任务分配的均衡性和作业资源的利用率,提出集装箱堆场箱区场桥均衡作业的调度问题.根据集装箱场桥作业特点及其关联性,以集装箱堆场箱区作业箱量均衡和作业时间均衡两个均衡调度为目标,建立了集装箱堆场箱区场桥均衡调度模型,并设计遗传算法求解.通过设计均衡度评价指标,对不同均衡目标与所得方案效果之间的关系进行分析,得到均衡度改善的比率.最后通过输入场桥数量参数的变化得出场桥数量与均衡性之间的关系,为场桥配置与调度工作提供理论依据.

  4. 以虚拟仿真系统培训起重机作业人员%Training of crane operating personnel based on virtual simulation system

    Institute of Scientific and Technical Information of China (English)

    胥洪流; 张贞贞; 董浩明

    2011-01-01

    阐述了传统起重机作业人员培训中存在的弊端,针对目前存在的问题提出了将虚拟仿真技术用于起重机作业人员培训系统的开发中,分析了起重机模拟训练器的国内外研究现状,列举了起重机作业人员培训中的应用案例.%The papers describes the disadvantages in the traditional crane operating personnel training, advises the application of virtual simulation technology on the development of the crane operating personnel training system in regard to the current problems, analyzes the current study status of the crane simulation trainer home and abroad, and lists application cases of crane operating personnel training.

  5. The effect of joystick handle size and gain at two levels of required precision on performance and physical load on crane operators.

    Science.gov (United States)

    Huysmans, Maaike A; de Looze, Michiel P; Hoozemans, Marco J M; van der Beek, Allard J; van Dieën, Jaap H

    2006-09-15

    The study was designed to determine the effect of joystick handle size and (display-control) gain at two levels of required task precision on performance and physical load on crane operators. Eight experienced crane operators performed a simulated crane operation task on a computer by use of a joystick with either a short or a large handle. The task was performed at three gain levels and at two levels of required precision. Task performance, wrist and forearm postures, upper extremity muscle activity, perceived exertion and perceived comfort were measured.Task performance improved when using the joystick with the short handle and when working at a higher gain, while physical load decreased or remained the same. An increased level of required task precision was associated with a lower performance, but physical load was not affected. External validity of the simulated crane task seemed sufficient enough to extrapolate the results to practice.A joystick with a short handle is recommended, as this leads to an increased performance whilst the operator's physical load decreases or remains the same. Further optimization of performance and physical load can be achieved by optimizing gain settings of the joystick in relation to the task and type of joystick used.

  6. Small Unit Operations

    Science.gov (United States)

    2007-11-02

    best demonstrated value for small (< AA size) lithium - thionyl - chloride batteries (Halpert 1993). Equation (2-3) shows that the solar power...However, this energy den- sity this is only ~ 3 times larger than the demonstrated performance of the best lithium batteries , and the fuel cells are...Units 13 2.2.2 ASIC Capability 15 2.2.3 Power and Size 17 2.2.4 Cost 19 2.3 Power Sources 20 2.3.1 Batteries 21 2.3.2 Solar Augmentation

  7. Electromagnet and switchboard for slewing crane

    OpenAIRE

    2006-01-01

    This paper presents an electromagnet and a switchboard used on a science fair slewing crane described in a separate paper. The electromagnet can lift 50kg loads. The switchboard includes a transformer that powers the electromagnet. It also contains relays, contactors and inverters that allow the operation of the crane three-phase motors using a single-phase power supply. Crane slewing is limited to an 180º angle, for safety reasons. Pressing an emergency button switches off all command circui...

  8. Disseminated visceral coccidiosis in sandhill cranes

    Science.gov (United States)

    Carpenter, J.W.; Novilla, M.N.; Fayer, R.; Iverson, G.C.

    1984-01-01

    Disseminated visceral coccidiosis (DVC) caused by Eimeria spp was first recognized as a disease entity in captive sandhill cranes (Grus canadensis) and whooping cranes (G americana) at the Patuxent Wildlife Research Center. Because cranes produced at the Center are reintroduced to the wild to augment wild populations, studies involving both experimentally induced and natural infections were initiated to determine the potential or actual occurrence of DVC in wild Gruidae. Nine sandhill cranes dosed orally with eimerian oocysts of wild origin developed lesions characteristic of DVC. Extraintestinal granulomas associated with developing schizonts were found in 6 birds. Similar lesions were observed in wild sandhill cranes throughout parts of midwestern United States, Alaska, and Saskatchewan. These studies revealed the wide geographic distribution and the high frequency of occurrence of DVC in wild cranes.

  9. Software tools for quay crane exploitation and training

    OpenAIRE

    Dragomir Cristina; Breazu Alina

    2011-01-01

    One of the objectives of berth crane operations management in ports is productivity maximization of berth cranes, matched with the vessel requirement of minimizing waiting times. This paper presents several management software tools for berth crane operations in ports that are used for aquiring such an objective

  10. Evaluation of nocturnal roost and diurnal sites used by whooping cranes in the Great Plains, United States

    Science.gov (United States)

    Pearse, Aaron T.; Harner, Mary J.; Baasch, David M.; Wright, Greg D.; Caven, Andrew J.; Metzger, Kristine L.

    2017-01-17

    Endangered whooping cranes (Grus americana) of the Aransas-Wood Buffalo population migrate through the Great Plains twice each year. Although there is much interest in conservation and management for this species, information regarding characteristics of nocturnal roost sites used during migration has been limited and based largely on incidental observations. Using high-quality location data collected concurrently, we directed a companion field study designed to characterize sites used as roost or day-use sites to augment knowledge and assist the Platte River Recovery Implementation Program in identifying migration habitat for restoration, conservation, and management actions along the Platte River in central Nebraska. We collected data at 504 roost sites and 83 day-use sites used by marked whooping cranes in Texas, Oklahoma, Kansas, Nebraska, South Dakota, North Dakota, Minnesota, and Montana. Roost sites were located in emergent wetlands (50 percent), lacustrine wetlands (25 percent), rivers (20 percent), and dryland sites (5 percent). Most day-use sites were characterized as dryland sites (54 percent), with the balance in wetlands (45 percent) and rivers (1 percent). Habitat criteria thresholds initially derived by the Platte River Recovery Implementation Program to represent where 90 percent of whooping cranes used along the Platte River were different from those we measured over a larger section of the migration corridor. For most of the metrics, the Platte River Recovery Implementation Program’s initial habitat criteria thresholds would be considered more conservative than critical values estimated from our data; thus, whooping cranes were seemingly able to tolerate a wider range of these metrics than initially suspected. One exception was the metric distance to nearest disturbance feature, where our results sug­gest that whooping cranes may be less tolerant to nearby dis­turbances in a larger part of the migration corridor compared to the Platte River

  11. Wave response analyses of floating crane structure; Crane sen no jobu kozobutsu no haro oto

    Energy Technology Data Exchange (ETDEWEB)

    Nobukawa, H.; Takaki, M.; Kitamura, M.; Ahou, G. [Hiroshima University, Hiroshima (Japan). Faculty of Engineering; Higashimura, M. [Fukada Salvage and Marine Works Co. Ltd., Osaka (Japan)

    1996-12-31

    Identifying a dynamic load acting on a lifted load in a floating crane moving in waves is important for preparing an operation manual for the floating crane. Analyses were made on motions in waves of a floating crane with a lifting load of 3,600 tons, with considerations given to deformation of the crane structure. Discussions were given on a dynamic load acting on a lifted load. If a case that considers elastic deformation in the crane structure is compared with a case that does not consider same in calculating hull motions of the floating crane, the difference between them is small if wave length {lambda} to the ship length L is about 0.5. However, if {lambda}/L is 1.0 and 1.5, the difference grows very large. Therefore, the effect of deformation in the crane structure on hull motions of the floating crane cannot be ignored in these cases. A dynamic load acting on a lifted load that considers deformation in the crane structure is about 5% of lifted weight in a headsea condition in which the wave height is 2 m and {lambda}/L is 1.5. As opposed, an estimated value of a dynamic load when the crane structure is regarded as a rigid body is 13%, which is 2.6 times as great as the case that considers deformation of the crane structure. 3 refs., 17 figs., 1 tab.

  12. 29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

    Science.gov (United States)

    2010-07-01

    ... crane shall be equipped with at least one holding brake, applied directly to the motor shaft or gear... shall be clearly marked, or a chart showing their function shall be posted at the operator's position... equipment whose total actual gross weight is marked on the unit or units hoisted, and the total actual...

  13. Effects of captivity and artificial breeding on microbiota in feces of the red-crowned crane (Grus japonensis)

    Science.gov (United States)

    Xie, Yuwei; Xia, Pu; Wang, Hui; Yu, Hongxia; Giesy, John P.; Zhang, Yimin; Mora, Miguel A.; Zhang, Xiaowei

    2016-01-01

    Reintroduction of the threatened red-crowned crane has been unsuccessful. Although gut microbiota correlates with host health, there is little information on gut microbiota of cranes under different conservation strategies. The study examined effects of captivity, artificial breeding and life stage on gut microbiota of red-crown cranes. The gut microbiotas of wild, captive adolescent, captive adult, artificially bred adolescent and artificially bred adult cranes were characterized by next-generation sequencing of 16S rRNA gene amplicons. The gut microbiotas were dominated by three phyla: Firmicutes (62.9%), Proteobacteria (29.9%) and Fusobacteria (9.6%). Bacilli dominated the ‘core’ community consisting of 198 operational taxonomic units (OTUs). Both captivity and artificial breeding influenced the structures and diversities microbiota of the gut. Especially, wild cranes had distinct compositions of gut microbiota from captive and artificially bred cranes. The greatest alpha diversity was found in captive cranes, while wild cranes had the least. According to the results of ordination analysis, influences of captivity and artificial breeding were greater than that of life stage. Overall, captivity and artificial breeding influenced the gut microbiota, potentially due to changes in diet, vaccination, antibiotics and living conditions. Metagenomics can serve as a supplementary non-invasive screening tool for disease control. PMID:27628212

  14. Improved Visual Hook Capturing and Tracking for Precision Hoisting of Tower Crane

    Directory of Open Access Journals (Sweden)

    Yanming Li

    2013-01-01

    Full Text Available To maintain safe operation of the tower crane, it is important to monitor the activities of the hook system. Visual monitoring and image recognition are the optimum methods for crane hook tracking and precision hoisting. High real-time performance and low computation requirements are required for tower crane hook capturing and tracking system which is implemented on the embedded Advanced RISC Machines (ARM processor or Microcontrol Unit (MCU. Using the lift rope of a tower crane as the target object, a new high-performance hook tracking method suitble for ARM processor or MCU applications is presented. The features of the lifting process are analyzed, and an improved progressive probabilistic Hough transform (IPPHT algorithm is proposed which canreduce capturing time by up to 80%. Combining color histogram with a binary search algorithm, an adaptive zooming method for precise hoisting is presented. Using this method the optimum zoom scale can be achieved within a few iterations.

  15. Operational modal analysis of harbor crane under ambient excitation%基于环境激励的港口起重机工作模态分析

    Institute of Scientific and Technical Information of China (English)

    龚凌诸; 杨晓翔; 钟舜聪; 郭金泉; 许忠福; 梁崇忠

    2011-01-01

    Aiming at solving the excitation problems of a 40 t harbor crane, operational modal analysis using natural excitation technique (NEXT) were investigated. Ambient excitation, such as that caused by wind, was employed to excite the crane. With the unknown input (excitation) signal, only the response signals were recorded. Taking one of the response signals as the reference, the cross power spectra of response signals were calculated and used for modal identification of the crane. The first four lower modal parameters ( frequencies, damping ratios and mode shapes) were obtained. The results indicate that operational modal analysis of harbor cranes using NExT is applicable.Therefore, NExT could bo recommended in modal testing and analysis of other special equipments.%针对港口起重机难以施加激振力的问题,采用自然环境激励技术(NExT)对港口起重机进行了工作模态分析.在自然风的随机激励下,对某港口40t位起重机进行了模态试验.采用响应点与参考点之间的互功率谱的幅值图代替集总传递函数的幅值图进行了模态分析.由所有测点和参考点间的互功率谱,通过拟合各响应点同参考点之间的互功率谱来识别起重机前4阶低阶模态参数(振型、频率和阻尼).研究结果表明,利用环境激励法对港口起重机的模态参数识别是行之有效的,该方法可推广应用于其他大型特种设备的模态试验和分析.

  16. Eye Movement Model of the Crane Drivers’ Standardize operations%桥吊司机规范操作作业眼动模型分析

    Institute of Scientific and Technical Information of China (English)

    施笑畏; 王青

    2016-01-01

    In order to learn the dynamic visual behavior patterns for the crane drivers’ work,drivers’ eye movement parameters have been analyzed when they are in standardize operation based on the eye-movement tracking technology. A drivers’ Eyelid-pupil model is built by using time sequence model, and the stability of the model has been verified finally. This model is important for analyzing the reliability of crane operator jobs.%为了解桥吊司机操作作业动态视觉行为模式,基于桥吊司机规范操作作业眼动实验,分析操作任务中司机的眼动参数变化,利用时间序列分析模型建立眼睑尺寸-瞳孔尺寸动态数学模型,并验证了模型的稳定性。该模型对分析桥吊操作作业可靠性具有重要意义。

  17. Dynamic berth and quay crane allocation for multiple berth positions and quay cranes

    NARCIS (Netherlands)

    Tri Cahyono, Rully; Flonk, E.J.; Jayawardhana, Bayu

    2015-01-01

    We study in this paper a dynamic berth and quay cranes allocation strategy in general seaport container terminals. We develop a dynamical model that describes the operation of berthing process with multiple discrete berthing positions and multiple quay cranes. Based on the proposed model, we develop

  18. Unit Operations for the Food Industry: Equilibrium Processes & Mechanical Operations

    OpenAIRE

    Guiné, Raquel

    2013-01-01

    Unit operations are an area of engineering that is at the same time very fascinating and most essential for the industry in general and the food industry in particular. This book was prepared in a way to achieve simultaneously the academic and practical perspectives. It is organized into two parts: the unit operations based on equilibrium processes and the mechanical operations. Each topic starts with a presentation of the fundamental concepts and principles, followed by a discussion of ...

  19. Plasma treatment of crane rails

    Directory of Open Access Journals (Sweden)

    Владислав Олександрович Мазур

    2016-07-01

    Full Text Available Crane operation results in wear and tear of rails and crane wheels. Renovation and efficiency of these details is therefore relevant. Modern technologies of wheels and rails restoration use surfacing or high-frequency currents treatment. Surface treatment with highly concentrated streams of energy- with a laser beam, plasma jet- is a promising direction.. It is proposed to increase the efficiency of crane rails by means of surface plasma treatment. The modes of treatment have been chosen.. Modelling of plasma jet thermal impact on a solid body of complex shape has been made. Plasma hardening regimes that meet the requirements of production have been defined. Structural transformation of the material in the crane rails on plasma treatment has been investigated. It has been concluded that for carbon and low alloy crane steels the plasma exposure zone is characterized by a high degree of hardened structure dispersion and higher hardness as compared to the hardness after high-frequency quenching. As this takes place phase transformations are both shift (in the upper zone of plasma influence and fluctuation (in the lower zone of the plasma. With high-speed plasma heating granular or lamellar pearlite mainly transforms into austenite. The level of service characteristics of hardened steel, which is achieved in this case is determined by the kinetics and completeness of pearlite → austenite transformation. For carbon and low alloy rail steels plasma hardening can replace bulk hardening, hardening by high-frequency currents, or surfacing. The modes for plasma treatment which make it possible to obtain a surface layer with a certain service characteristics have been defined

  20. Mineral operations outside the United States

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Mineral facilities and operations outside the United States compiled by the National Minerals Information Center of the USGS. This representation combines source...

  1. A new crane for the LHC magnets

    CERN Multimedia

    2002-01-01

    Last Friday CERN took delivery of the new crane that will be used for handling the LHC magnets. CERN took delivery of its new telescopic mobile crane on Friday, 22 February. It underwent its first operating tests, which consisted of lifting a 37-tonne concrete block. Five drive-steer axles, two engines with a capacity of 544 and 203 hp respectively, a telescopic boom with a 60-metre reach and a lifting capacity of 160 tonnes at 3 metres: these are the impressive characteristics of CERN's new 160-tonne crane. And the handling of the LHC magnets, each weighing a 'trifling' 33 tonnes, demands no less than this. The new crane will be required to load the magnets made in Building SM18 onto a trailer that will take them to the Prévessin site, where they will be put in storage until they can be lowered into the tunnel. The telescopic mobile crane arrived at CERN last Friday and has passed its first operating tests with flying colours. Until now, CERN had two cranes, with a maximum capacity of 40 and 60...

  2. 29 CFR 1918.55 - Cranes (See also § 1918.11).

    Science.gov (United States)

    2010-07-01

    ... shall not be used if control levers operate with excessive friction or excessive play. (6) When cranes... attached. (7) When two or more cranes hoist a load in unison, a designated person shall direct the...

  3. Design of a spreader bar crane-mounted gamma-ray radiation detection system

    Energy Technology Data Exchange (ETDEWEB)

    Grypp, Matthew D., E-mail: iglowgreen@neo.tamu.edu; Marianno, Craig M., E-mail: marianno@tamu.edu; Poston, John W., E-mail: j-poston@tamu.edu; Hearn, Gentry C., E-mail: ghearn@riacc.com

    2014-04-11

    Over 95% of imports entering the United States from outside North America arrive by sea at 329 ports of entry. These imports are packaged in more than 11 million cargo containers. Radiation portals monitors routinely scan cargo containers leaving port on specially-designed trucks. To accelerate the process, some commercial entities have placed detection systems on the spreader-bar cranes (SBCs) used to offload. Little is known about the radiation background profiles of systems operating on these cranes. To better understand the operational characteristics of these radiation detection systems; a research team from Texas A and M University (TAMU) mounted three thallium-doped sodium iodide [NaI(Tl)] detectors on an SBC at the Domestic Nuclear Detection Office's (DNDO) test track facility at the Port of Tacoma (PoT). These detectors were used to monitor background radiation levels and continuously recorded data during crane operations using a custom-built software package. Count rates and spectral data were recorded for various crane heights over both land and water. The results of this research created a background profile in which count rate was heavily dependent on position demonstrating how detector readings changed in the operational environment.

  4. Techniques for rearing and releasing nonmigratory cranes: Lessons from the Mississippi Sandhill Crane program

    Science.gov (United States)

    Ellis, D.H.; Olsen, G.H.; Gee, G.F.; Nicolich, Jane M.; O'Malley, K.E.; Nagendran, Meenakshi; Hereford, Scott G.; Range, P.; Harper, W.T.; Ingram, R.P.; Smith, D.G.

    1992-01-01

    Captive-reared Mississippi sandhill cranes (Grus canadensis pulla) reared at the Patuxent Wildlife Research Center (Patuxent) have been released at the Mississippi Sandhill Crane National Wildlife Refuge (MSCNWR) since 1981. Of 131 birds released through December 1990, 103 were reared by foster parents. The remaining 28 were experimentally hand-reared in 1989 and 1990. After refining release procedures, parent-reared birds have integrated into the wild flock, many have survived, and some have bred. Releases of hand-reared cranes elsewhere in the 1970's were largely unsuccessful, at least in part due to the lack of a lengthy acclimation period. A new hand-rearing protocol holds promise in producing release-worthy birds. The technique employs some features first used in the 1960's (e.g., a costume for the human caretaker and model crane heads used to train chicks to feed). In the mid-1980's, the following features were added: (1) the costumed caretaker was given a visor and feathers, (2) a taxidermic crane head or a hand puppet was held or suspended from the ceiling for use in stimulating chicks to feed, (3) a taxidermic mount of a brooding crane supplied warmth, (4) a full-sized live crane was maintained in an adjacent pen and in visual contact with neonatal young to provide an imprinting model, and (5) a small group of adult (or subadult) cranes was penned adjacent to the outdoor chick pens to provide socialization models. Recent releases of Mississippi sandhill cranes hand-reared according to this protocol and released in Mississippi have had high first-year survival rates. The now-operational technique holds promise for producing large numbers of release-worthy birds.

  5. Initial Production Test of Crane-Shovel, Crawler Mounted, 12-1/2-Ton, FSN 3810-926-1031.

    Science.gov (United States)

    crane shovel could be adequately maintained at operator and organizational maintenance level with tools and manuals available. Two test items were operated a total of 935 test hours on typical crane-shovel missions.

  6. Unpacking Referent Units in Fraction Operations

    Science.gov (United States)

    Philipp, Randolph A.; Hawthorne, Casey

    2015-01-01

    Although fraction operations are procedurally straightforward, they are complex, because they require learners to conceptualize different units and view quantities in multiple ways. Prospective secondary school teachers sometimes provide an algebraic explanation for inverting and multiplying when dividing fractions. That authors of this article…

  7. 29 CFR 1917.45 - Cranes and derricks (See also § 1917.50).

    Science.gov (United States)

    2010-07-01

    ... track area is used for employee passage or for work, a minimum clearance of three feet (.91 m) shall be... shall not be used in a manner that exerts sideloading stresses upon the crane or derrick boom. (2) No... to employees during crane and derrick operations, those parts shall be securely guarded. (2) Crane...

  8. Geodetic surveying of crane trail space relations

    Directory of Open Access Journals (Sweden)

    Ľudovít Kovanič

    2010-03-01

    Full Text Available Geodet´s obvious task consists of surveying crane trails of different types. These transport machines must meet precise geometricparameters, considering mainly the safety of their operation. The paper describes several geodetic methods of determining deviationsin direction and height of crane trails. Measurements were realized using special set of appliances composed for this purpose, as well asusing electronic theodolite for measurements from hall floor. Results ofmeasurements were processed using calculation programe Geus, andgraphicproramme Microstation. Used methods were compared in graphic form.

  9. The United States Military and Humanitarian Operations

    Science.gov (United States)

    1995-01-01

    stated that, "The wave of the future will be putting together task forces that will be able to respond to crisis management or humanitarian...examine three options for the military’s role in humanitaria operations at home and abroad. Option 1: Virtually Eliminate Anv Military Role This is the...humanitarian aid in almost any crisis .36 The military resists the creation of specially designated units because such specialization reduces the

  10. Feasibility Analysis of Crane Automation

    Institute of Scientific and Technical Information of China (English)

    DONG Ming-xiao; MEI Xue-song; JIANG Ge-dong; ZHANG Gui-qing

    2006-01-01

    This paper summarizes the modeling methods, open-loop control and closed-loop control techniques of various forms of cranes, worldwide, and discusses their feasibilities and limitations in engineering. Then the dynamic behaviors of cranes are analyzed. Finally, we propose applied modeling methods and feasible control techniques and demonstrate the feasibilities of crane automation.

  11. International Recovery Plan : Whooping Crane (Grus americana) : Third Revision

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — In the United States, the whooping crane (Grus americana) was listed as threatened with extinction in 1967 and endangered in 1970 – both listings were...

  12. NIC atomic operation unit with caching and bandwidth mitigation

    Science.gov (United States)

    Hemmert, Karl Scott; Underwood, Keith D.; Levenhagen, Michael J.

    2016-03-01

    A network interface controller atomic operation unit and a network interface control method comprising, in an atomic operation unit of a network interface controller, using a write-through cache and employing a rate-limiting functional unit.

  13. Crane reproductive physiology and conservation

    Science.gov (United States)

    Gee, G.F.

    1983-01-01

    Some unique features of crane reproduction, management, and conservation are described. Because cranes are sexually monomorphic, sexing is difficult and must be accomplished using behavior, laparoscopy, cloacal examination, genetic techniques, or fecal steroid analysis. Although husbandry techniques for cranes are similar to those used with other nondomestic birds, a number of basic characteristics, such as extreme aggressiveness, imprinting by the crane chick on man, a delayed molt in the immature crane, delayed sexual maturity, and infertility, pose special problems for the propagator. Artificial insemination is a practical solution to crane infertility. Vigorous captive management and propagation efforts must become increasingly important if several endangered crane species are to survive the continuing decline in wild populations. The ultimate goal is the restoration of suitable habitat and sustainable native populations.

  14. Three-Axis Motion Compensated Crane Head Control

    OpenAIRE

    Henriksen, Vegard Wie; Røine, Audun Gerhardsen

    2016-01-01

    Offshore operations can be harsh and demanding and set personnel and equipment at risk. Ships will be exposed to the environmental forces of wind, waves and current, which will influence offshore crane operations considerably. This thesis addresses the use of a crane head, a Three Axis Compensator (TAC), constructed as a Delta parallel robot, to compensate for the motions of the ship in three axes. This type of robot has a rigid and accurate structure, and because of its highly nonlinear natu...

  15. Development of sensorless easy-to-use overhead crane system via simulation based control

    Science.gov (United States)

    Tagawa, Yasutaka; Mori, Yoshihito; Wada, Masaomi; Kawajiri, Eisaku; Nouzuka, Kazuma

    2016-09-01

    This paper describes the newly developed overhead crane which has a sensorless vibration control system. Generally, loads which are carried by the overhead cranes are easy to vibrate and only skilled people can operate the cranes. Therefore, a lot of studies have been done to solve this problem by using feedback control with vibration sensors. However vibration sensors often break down in severe industrial environment and more reliable control systems are required. For this reason, we have been developing sensorless control system for overhead cranes. In this paper, we firstly introduce basic idea of simulation based control which is called IDCS, then overview and modeling of the overhead crane is presented. Next, the control system design of the overhead crane is discussed, and experimental results are shown for real overhead crane with 2 axes.

  16. The Crane Robust Control

    Directory of Open Access Journals (Sweden)

    Marek Hicar

    2004-01-01

    Full Text Available The article is about a control design for complete structure of the crane: crab, bridge and crane uplift.The most important unknown parameters for simulations are burden weight and length of hanging rope. We will use robustcontrol for crab and bridge control to ensure adaptivity for burden weight and rope length. Robust control will be designed for current control of the crab and bridge, necessary is to know the range of unknown parameters. Whole robust will be splitto subintervals and after correct identification of unknown parameters the most suitable robust controllers will be chosen.The most important condition at the crab and bridge motion is avoiding from burden swinging in the final position. Crab and bridge drive is designed by asynchronous motor fed from frequency converter. We will use crane uplift with burden weightobserver in combination for uplift, crab and bridge drive with cooperation of their parameters: burden weight, rope length and crab and bridge position. Controllers are designed by state control method. We will use preferably a disturbance observerwhich will identify burden weight as a disturbance. The system will be working in both modes at empty hook as well asat maximum load: burden uplifting and dropping down.

  17. 21 CFR 872.6640 - Dental operative unit and accessories.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental operative unit and accessories. 872.6640... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6640 Dental operative unit and accessories. (a) Identification. A dental operative unit and accessories is an AC-powered device that is...

  18. Simulation of fatigue damagesin secondary truss of crane

    Directory of Open Access Journals (Sweden)

    Eremin Konstantin Ivanovich

    2014-02-01

    Full Text Available Basing on the damaging statistics obtained during the on-site inspections of industrial multi-span building structures with under-crane secondary trusses which have continuous lower plinth, we simulated the scenario of the most likely damage development of under-crane secondary trusses.The first scenario is the development of cracks along the total cross section of plinth. In the process of calculations we defined a real deformation scheme of plinth of under-crane secondary trusses with damage and its stress condition.The second scenario is the destruction of a support or support mounting unit to the lower plinth of under-crane secondary trusses. The destruction of this kind can occur as a result of a crack in a support or as a result of destruction of high-strength fasteners of a support to plinth. We discovered that a system with such damage is geometrically unchanged; there is no possibility of sudden destruction of both the under-crane secondary trusses and the entire building frame.The third scenario is the upper plinth separation from one of the walls of lower plinth of under-crane secondary trusses.The scenario is developed to define the viability of under-crane secondary trusses as a result of cracks in the area of wall junction with the upper shelf of lower plinth, their further development and the appearance of discrete cracks developing into a backbone along the entire span length of under-crane secondary trusses.Based on the calculations of the stress strain state of under-crane secondary trusses with damages in the emergency nature in a separate span of the lower plinth and a truss member, we estimated the viability of structure. The analysis of viability limits makes it possible to find the measures of collapse preventing and avoid possible victims.

  19. Modelling and Simulation of Mobile Hydraulic Crane with Telescopic Arm

    DEFF Research Database (Denmark)

    Nielsen, Brian; Pedersen, Henrik Clemmensen; Andersen, Torben Ole

    2005-01-01

    For loader crane applications resolved motion control is assumed to be one of the areas for development in the future. To develop and evaluate different control strategies for a resolved motion control system, information about the dynamic behaviour of these cranes is necessary. In the current pa...... the relative movement of the individual mechanical bodies in the telescopic arm. The model is verified through comparisons between simulated and measured results for various operating conditions....

  20. 200-BP-5 operable unit treatability test report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    The 200-BP-5 Operable Unit was established in response to recommendations presented in the 200 East Groundwater Aggregate Area Management Study Report (AAMSR) (DOE-RL 1993a). Recognizing different approaches to remediation, the groundwater AAMSR recommended separating groundwater from source and vadose zone operable units and subdividing 200 East Area groundwater into two operable units. The division between the 200-BP-5 and 200-PO-1 Operable Units was based principally on source operable unit boundaries and distribution of groundwater plumes derived from either B Plant or Plutonium/Uranium Extraction (PUREX) Plant liquid waste disposal sites.

  1. Adaptive fuzzy sliding mode control for gantry crane as varying rope length

    Directory of Open Access Journals (Sweden)

    TRINH LUONG MIEN

    2016-08-01

    Full Text Available Gantry crane is used quite commonly in hazardous areas, which increasingly requires strict conrol of the gantry crane operation process to improve efficiency and ensure safe gantry crane opeartion. Automated the gantry crane operating process is being applied pupular currently. Gantry crane is often affected by large noise, having the varying- model parameters, so that proposed a apdaptive fuzzy combining sliding mode controller for the gantry crane in this article. This control method derived from combining the sliding surfaces of three subsystem of the gantry crane (trolley position, rope length, anti-swing to draw out two system sliding surfaces: the trolley positon with the anti-swing and the rope length and the anti-swing. On the based of the sliding mode control principle,drawn out the equivalent controller and the switching controller for gantry crane. But due to the uncertain parameters - nonlinear model of gantry crane with the bound disturbances, combining the fuzzy approximate method, defined the fuzzy controller (used to minic the equivalent controller and the compensation controller for the difference between the equivalent controller and the fuzzy controller (used as the switching controller for two system control inputs: trolley position and rope length The adaptive control laws for these controllers were deduced from Lyapunov’s stable criteria to asymptotically stabilize the sliding surfaces. Simulation results demonstrated the feasibility of the suggested method through grantry crane in the hazard areas.

  2. Dick Crane's California Days

    Science.gov (United States)

    Holbrow, Charles H.

    2011-03-01

    Horace Richard Crane (1907-2007) was born and educated in California. His childhood was full of activities that helped him become an outstanding experimental physicist. As a graduate student at the California Institute of Technology (1930-1934), he had the good fortune to work with Charles C. Lauritsen (1892-1968) just as he introduced accelerator-based nuclear physics to Caltech. They shared the euphoric excitement of opening up a new field with simple, ingenious apparatus and experiments. This work prepared Crane for his career at the University of Michigan (1935-1973) where in the 1950s, after making the first measurement of the electron's magnetic moment, he devised the g-2 technique and made the first measurement of the anomaly in the electron's magnetic moment. A man of direct, almost laconic style, he made lasting contributions to the exposition of physics to the general public and to its teaching in high schools, community colleges, four-year colleges, and universities. I tell how he became a physicist and describe some of his early achievements.

  3. Fuzzy Controllers for a Gantry Crane System with Experimental Verifications

    Directory of Open Access Journals (Sweden)

    Naif B. Almutairi

    2016-01-01

    Full Text Available The control problem of gantry cranes has attracted the attention of many researchers because of the various applications of these cranes in the industry. In this paper we propose two fuzzy controllers to control the position of the cart of a gantry crane while suppressing the swing angle of the payload. Firstly, we propose a dual PD fuzzy controller where the parameters of each PD controller change as the cart moves toward its desired position, while maintaining a small swing angle of the payload. This controller uses two fuzzy subsystems. Then, we propose a fuzzy controller which is based on heuristics. The rules of this controller are obtained taking into account the knowledge of an experienced crane operator. This controller is unique in that it uses only one fuzzy system to achieve the control objective. The validity of the designed controllers is tested through extensive MATLAB simulations as well as experimental results on a laboratory gantry crane apparatus. The simulation results as well as the experimental results indicate that the proposed fuzzy controllers work well. Moreover, the simulation and the experimental results demonstrate the robustness of the proposed control schemes against output disturbances as well as against uncertainty in some of the parameters of the crane.

  4. Accelerating the Fourier split operator method via graphics processing units

    CERN Document Server

    Bauke, Heiko

    2010-01-01

    Current generations of graphics processing units have turned into highly parallel devices with general computing capabilities. Thus, graphics processing units may be utilized, for example, to solve time dependent partial differential equations by the Fourier split operator method. In this contribution, we demonstrate that graphics processing units are capable to calculate fast Fourier transforms much more efficiently than traditional central processing units. Thus, graphics processing units render efficient implementations of the Fourier split operator method possible. Performance gains of more than an order of magnitude as compared to implementations for traditional central processing units are reached in the solution of the time dependent Schr\\"odinger equation and the time dependent Dirac equation.

  5. UNITED STATES SPECIAL OPERATIONS FORCES IN AFRICA

    Science.gov (United States)

    2016-02-16

    and Nathan Rickard ,”Operation Serval: French Intervention in Mali,” Air Operations Division, Defence Science & Technology Organisation, http...www.cfr.org/nigeria/boko-haram/p25739. 56 James J. F. Forest, Confronting the Terrorism of Boko Haram in Nigeria, Joint Special Operations University...Best Practices.” Joint Forces Quarterly, Issue 50, 3d Quarter 2008. 30 Forest, James J. F. Confronting the Terrorism of Boko Haram in

  6. Pathogenicity of West Nile virus and response to vaccination in sandhill cranes (Grus canadensis) using a killed vaccine.

    Science.gov (United States)

    Olsen, G.H.; Miller, K.J.; Docherty, D.E.; Bochsler, V.S.; Sileo, L.

    2009-01-01

    West Nile virus was introduced into the United States in the vicinity of New York, New York, USA in 1999. The virus has since killed large numbers of birds nationwide, especially, but not limited to, crows (Corvus brachyrhinchos). One sandhill crane (Grus canadensis) at the Bridgeport Zoo (Bridgeport, Connecticut, USA) reportedly died from West Nile virus, so sandhill cranes and endangered whooping cranes (Grus americana), both in the wild and in captive breeding colonies at United States Geological Service (USGS) Patuxent Wildlife Research Center (Laurel, Maryland, USA) were considered at risk. A killed vaccine in sandhill cranes was evaluated by vaccinating and then challenging these cranes with live West Nile virus. No sandhill cranes inoculated with the killed vaccine developed significant titers when compared with unvaccinated controls. No sandhill cranes inoculated with the vaccine and challenged with the virus died from West Nile virus infection. In addition, no unvaccinated challenged sandhill cranes died. However, 2 days postchallenge, vaccinated cranes had significantly less viremia (P cell aggregates in both the brain and brain stem areas, and this was not observed in vaccinated challenged cranes or in vaccinated unchallenged cranes.

  7. On trajectory generation for flexible space crane: Inverse dynamics analysis by LATDYN

    Science.gov (United States)

    Chen, G.-S.; Housner, J. M.; Wu, S.-C.; Chang, C.-W.

    1989-01-01

    For future in-space construction facility, one or more space cranes capable of manipulating and positioning large and massive spacecraft components will be needed. Inverse dynamics was extensively studied as a basis for trajectory generation and control of robot manipulators. The focus here is on trajectory generation in the gross-motion phase of space crane operation. Inverse dynamics of the flexible crane body is much more complex and intricate as compared with rigid robot link. To model and solve the space crane's inverse dynamics problem, LATDYN program which employs a three-dimensional finite element formulation for the multibody truss-type structures will be used. The formulation is oriented toward a joint dominated structure which is suitable for the proposed space crane concept. To track a planned trajectory, procedures will be developed to obtain the actuation profile and dynamics envelope which are pertinent to the design and performance requirements of the space crane concept.

  8. Analysis on Operation Reliability of Generating Units in 2009

    Institute of Scientific and Technical Information of China (English)

    Zhou

    2010-01-01

    This paper presents the data on operation reliability indices and relevant analyses toward China's conventional power generating units in 2009. The units brought into the statistical analysis include 100-MW or above thermal generating units, 40-MW or above hydro generating units, and all nuclear generating units. The reliability indices embodied include utilization hours, times and hours of scheduled outages, times and hours of unscheduled outages, equivalent forced outage rate and equivalent availability factor.

  9. 铁路油槽车不同类型装卸油鹤管运行工况分析%Operating Condition Analysis of Different Type of Crane Tubes forOil Loading and Unloadingof Rail Oil Tankers

    Institute of Scientific and Technical Information of China (English)

    杨明; 叶振生; 屈磊

    2014-01-01

    Currently, most petroleum products are transported bypipeline, but part of oil products are still transported by rail oil tanker due to geographical constraints and volatility of regional energy demand.The typeand quantityof crane tubecanaffect the operating parameters when loading or unloading oilproducts.Inthispaper, thesoftware was used tosimulate loading or unloading oil productsprocessin differentdiametersofcrane tube, and pressure and velocity changesin crane tube, collect pipe and transport pipewere analyzed,which couldprovide technological and theoretical basis for loading or unloading oil products in rail transportation.%目前大部分石油产品均采用管道输送方式进行外输,但由于受地理位置的限制及各地区对能源需求的波动性,部分油品还需配合铁路油罐车输送方式实现外输。当装卸油品时,鹤管类型及数量影响着管内油品的运行参数,应用软件对不同直径鹤管在装卸油品时的各参数进行数值模拟,通过分析鹤管、集油管及输油管内油品的压力、速度等参数的变化,为铁路装卸油品提供技术服务及理论支持。

  10. Integrated Ground Operations Demonstration Units Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall goal of the project is to demonstrate cost efficient cryogenic operations on a relevant scale that can be projected onto future Spaceport architectures...

  11. Analysis of Serbian Military Riverine Units Capability for Participation in the United Nations Peacekeeping Operations

    Directory of Open Access Journals (Sweden)

    Slobodan Radojevic

    2017-06-01

    Full Text Available This paper analyses required personnel, training capacities and equipment for participation in the United Nations peacekeeping operations with the riverine elements. In order to meet necessary capabilities for engagement in United Nations peacekeeping operations, Serbian military riverine units have to be compatible with the issued UN requirements. Serbian Armed Forces have the potential to reach such requirements with the River Flotilla as a pivot for the participation in UN missions. Serbian Military Academy adopted and developed educational and training program in accordance with the provisions and recommendations of the IMO conventions and IMO model courses. Serbian Military Academy has opportunities for education and training military riverine units for participation in the United Nations peacekeeping operations. Moreover, Serbia has Multinational Operations Training Center and Peacekeeping Operations Center certified to provide selection, training, equipping and preparations of individuals and units to the United Nations multinational operations.

  12. Military Implications of United Nations Peacekeeping Operations

    Science.gov (United States)

    1993-06-01

    maintenance of law and order, protecting the delivery of humanitarian assistance, the denial of an air space and the guarantee of rights of passage . In...involve the coordinated presence of warships and combat aircraft in the disputed region. Operations to guarantee rights of passage may be mounted to ensure

  13. Study on safety operation for large hydroelectric generator unit

    Science.gov (United States)

    Yan, Z. G.; Cui, T.; Zhou, L. J.; Zhi, F. L.; Wang, Z. W.

    2012-11-01

    Hydroelectric generator unit is a complex mechanical system which is composed of hydraulic turbine and electric generator. Rotary system is supported by the bearing bracket and the reinforced concrete structures, and vibration problem can't be avoided in the process of operating. Many large-scale hydroelectric units have been damaged because of the vibration problem in recent years. As the increase of the hydraulic turbine unit capacity and water head, the safe operation of hydraulic turbine has become a focus research in many countries. The operating characteristics of the hydraulic turbine have obvious differences at different working conditions. Based on the combination of field measurement and theoretical calculation, this paper shows a deep research on the safe operation of a large-scale Francis turbine unit. Firstly, the measurements of vibration, swing, pressure fluctuation and noise were carried out at 4 different heads. And also the relationships between vibrations and pressure fluctuations at different heads and working conditions were analysed deeply. Then the scientific prediction of safe operation for the unit at high head were done based on the CFD numerical calculation. Finally, this paper shows the division of the operating zone for the hydroelectric unit. According to the experimental results (vibrations, swings, pressure fluctuations and noise) as well as the theoretical results, the operating zone of the unit has been divided into three sections: prohibited operating zone, transition operating zone and safe operating zone. After this research was applied in the hydropower station, the security and economic efficiency of unit increased greatly, and enormous economic benefits and social benefits have been obtained.

  14. Head stabilization in whooping cranes

    Science.gov (United States)

    Kinloch, M.R.; Cronin, T.W.; Olsen, G.H.; Chavez-Ramirez, Felipe

    2005-01-01

    The whooping crane (Grus americana) is the tallest bird in North America, yet not much is known about its visual ecology. How these birds overcome their unusual height to identify, locate, track, and capture prey items is not well understood. There have been many studies on head and eye stabilization in large wading birds (herons and egrets), but the pattern of head movement and stabilization during foraging is unclear. Patterns of head movement and stabilization during walking were examined in whooping cranes at Patuxent Wildlife Research Center, Laurel, Maryland USA. Four whooping cranes (1 male and 3 females) were videotaped for this study. All birds were already acclimated to the presence of people and to food rewards. Whooping cranes were videotaped using both digital and Hi-8 Sony video cameras (Sony Corporation, 7-35 Kitashinagawa, 6-Chome, Shinagawa-ku, Tokyo, Japan), placed on a tripod and set at bird height in the cranes' home pens. The cranes were videotaped repeatedly, at different locations in the pens and while walking (or running) at different speeds. Rewards (meal worms, smelt, crickets and corn) were used to entice the cranes to walk across the camera's view plane. The resulting videotape was analyzed at the University of Maryland at Baltimore County. Briefly, we used a computerized reduced graphic model of a crane superimposed over each frame of analyzed tape segments by means of a custom written program (T. W. Cronin, using C++) with the ability to combine video and computer graphic input. The speed of the birds in analyzed segments ranged from 0.30 m/s to 2.64 m/s, and the proportion of time the head was stabilized ranged from 79% to 0%, respectively. The speed at which the proportion reached 0% was 1.83 m/s. The analyses suggest that the proportion of time the head is stable decreases as speed of the bird increases. In all cases, birds were able to reach their target prey with little difficulty. Thus when cranes are walking searching for food

  15. 29 CFR 1910.179 - Overhead and gantry cranes.

    Science.gov (United States)

    2010-07-01

    ... fixed ladder, stairs, or platform requiring no step over any gap exceeding 12 inches. Fixed ladders... to step on it. (f) Brakes—(1) Brakes for hoists. (i) Each independent hoisting unit of a crane shall... enclosed type with provision for locking in the open position. Means for discharging the inductive load...

  16. Security-constrained unit commitment with flexible operating modes

    Science.gov (United States)

    Lu, Bo

    The electricity industry throughout the world, which has long been dominated by vertically integrated utilities, is facing enormous challenges. To enhance the competition in electricity industry, vertically integrated utilities are evolving into a distributed and competitive industry in which market forces drive the price of electricity and possibly reduce the net cost of supplying electrical loads through increased competition. To excel in the competition, generation companies (GENCOs) will acquire additional generating units with flexible operating capability which allows a timely response to the continuous changes in power system conditions. This dissertation considers the short-term scheduling of generating units with flexible modes of operation in security-constrained unit commitment (SCUC). Among the units considered in this study are combined cycle units, fuel switching/blending units, photovoltaic/battery system, pumped-storage units, and cascaded hydro units. The proposed security-constrained unit commitment solution will include a detailed model of transmission system which could impact the short-term scheduling of units with flexible operation modes.

  17. Sand and Gravel Operations in the United States - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer includes sand and gravel operations in the United States. These data were obtained from information reported voluntarily to the USGS by the aggregate...

  18. Crushed Stone Operations in the United States - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer includes crushed stone operations in the United States. These data were obtained from information reported voluntarily to the USGS by the aggregate...

  19. Eielson Air Force Base Operable Unit 2 baseline risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, R.E.; Jarvis, T.T.; Jarvis, M.R.; Whelan, G.

    1994-10-01

    Operable Unit 2 at Eielson Air Force Base (AFB) near Fairbanks, is one of several operable units characterized by petroleum, oil, and lubricant contamination, and by the presence of organic products floating at the water table, as a result of Air Force operations since the 1940s. The base is approximately 19,270 acres in size, and comprises the areas for military operations and a residential neighborhood for military dependents. Within Operable Unit 2, there are seven source areas. These source areas were grouped together primarily because of the contaminants released and hence are not necessarily in geographical proximity. Source area ST10 includes a surface water body (Hardfill Lake) next to a fuel spill area. The primary constituents of concern for human health include benzene, toluene, ethylbenzene, and xylenes (BTEX). Monitored data showed these volatile constituents to be present in groundwater wells. The data also showed an elevated level of trace metals in groundwater.

  20. EXAMINATION AND TESTING OF CRANE BEAMS OF AN OVERFLOW DAM

    Directory of Open Access Journals (Sweden)

    Kholopov Igor' Serafimovich

    2012-10-01

    Full Text Available The following conclusions were made upon completion of the testing of crane beams: The lowest rigidity is demonstrated by welded beams exposed to temporary mobile loads; the maximal buckling caused by temporary mobile loads is equal to 12 mm, or 1/1,1790 of the span; the rigidity of crane beams of an overflow dam meets the requirements set by Section E2.1 of Construction Rules 20.13330.2011 "Loads and Actions". In general, the authors state that the crane beams of the span structure of the overflow dam are in a serviceable operating condition, according to their opinion issued upon completion of examination and testing procedures. The recommendation is to regularly tighten screw nuts and to install high-strength bolts in the points of missing rivets. The authors also recommend applying a rust-proofing coating to all metal structures of the dam spans.

  1. 46 CFR 107.258 - Crane certification.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Crane certification. 107.258 Section 107.258 Shipping... CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current... West 44th Street, New York, NY 10036, on the Internet at http://www.icgb.com. (b) Crane...

  2. Mississippi Sandhill Crane National Wildlife Refuge : Annual Prescribed Burn Plan FY 85

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This Annual Prescribed Burn Plan for Mississippi Sandhill Crane NWR lists the planned unit prescriptions during the 1985 fiscal year. Approximately one-third of...

  3. Feasibility study report for the 200-BP-1 operable unit

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    This feasibility study examines a range of alternatives and provides recommendations for selecting a preferred alternative for remediating contamination at the 200-BP-1 operable unit. The 200-BP-1 operable unit is located in the center of the Hanford Site along the northern boundary of the 200 East Area. The 241-BY Tank Farm is located immediately to the south of the operable unit. 200-BP-1 is a source operable unit with contaminated soils associated primarily with nine inactive cribs (known as the 216-B cribs). These cribs were used for disposal of low-level radioactive liquid waste from U Plant uranium recovery operations, and waste storage tank condensate from the adjacent 241-BY Tank Farm. The cribs used for disposal of U Plant waste were in operation from 1955--1965, and the cribs used for disposal of tank condensate were in operation from 1965--1975. In addition to the cribs, four unplanned releases of radioactive materials have occurred within the operable unit. Contaminated surface soils associated with the unplanned releases have been consolidated over the cribs and covered with clean soil to reduce contaminant migration and exposure. Discharge of wastes to the cribs has resulted in soil and groundwater contamination. The groundwater is being addressed as part of the 200 East Aggregate Area, groundwater operable unit. Contaminated soils at the site can be categorized by the types of contaminants, their distribution in the soil column, and the risk posed by the various potential exposure pathways. Below the clean soil cover, the near surface soils contain low-levels of contamination with cesium-137, radium-226, strontium-90, thorium-228, and uranium. The lifetime incremental cancer risk associated with these soils if they were exposed at the surface is 9{times}10{sup {minus}5}.

  4. Automatic Supervisory System Synthesis for Port Cranes Collision Prevention by Using Petri Net

    Directory of Open Access Journals (Sweden)

    Danko Kezić

    2006-05-01

    Full Text Available The article deals with the system of port cranes comprisingtwo independently controlled cranes which are simultaneouslyengaged in the transhipment of cargo between a vessel and arailway wagon assembly alongside. The crane operator's errorcan lead to tlie collision of cranes. Therefore, it is necessary toinstall the supervisor in an automatic control system with thefunctions of continuous supervision of the process of cranemovement, and blocking of commands that can lead to collision.The article shows the method of crane system modellingas a discrete event system by using PIT and P-timed Petri nets.There is a proposal of a formal mathematic method for calculationof the state supervisor by P-invariant method. The supervisorcalculated in this way is maximally permissive supervisor.The efficiency of the supervisor is verified by a computer simulation.

  5. Influence of sulfur physical properties in Claus unit operation

    Energy Technology Data Exchange (ETDEWEB)

    Larraz Mora, R.; Arvelo Alvarez, R. [Chemical Engineering Dept., Univ. of la Laguna, Tenerife (Spain)

    2002-09-01

    The Claus process is an efficient way of removing H{sub 2}S from acid gas streams and it has been widely practiced in industries such as natural gas processing, oil refining and metal smelting. Increasingly strict pollution control regulations require maximum sulfur recovery and high stream factor from the Claus units in order to minimize sulfur-containing effluents. As has been widely reported Claus unit's damages mainly occur during start up and shutdown. These operations involve scheduled warm-up and cool-down of the unit, usually burning refinery fuel-gas, which if not properly made can produce severe pipe and equipment plugging as well as catalyst deactivation. Sulfur products remaining in the unit during a shutdown period can produce dramatic unit corrosion episodes diminishing sulfur recovery unit stream factor. In the present paper some guidelines are given based on sulfur physical properties singularities which help to improve start-up/shut-down procedures. (orig.)

  6. Analysis on Isolation Condenser Operation by Fukushima Daiichi Unit 1 Operators

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Man Cheol [Chungang University, Seoul (Korea, Republic of)

    2014-08-15

    Fukushima Daiichi nuclear accident resulted in the core damage in three reactors and the release of considerable amount of radioactive material to the environment, not to mention significant social impact and anti-nuclear atmosphere all around the world. This paper provides a review of the findings related to shift operators' operation of the isolation condenser in Unit 1 to examine shift operators' response to the situation. Based on the review of the findings, a situation assessment model was developed to analyze shift operators' understanding on whether core cooling was successfully performed in Unit 1 through the operation of isolation condenser. It was found that lack of information could be one of the main causes for the failure in core cooling by the IC in Unit 1. It is also recommended that the differences in the mathematical model for the situation assessment and that of the real operator need to be further investigated.

  7. Analysis on Operation Reliability of Generating Units in 2005

    Institute of Scientific and Technical Information of China (English)

    Zuo Xiaowen; Chu Xue

    2007-01-01

    @@ The weighted average equivalent availability factor of thermal power units in 2005 was 92.34%, an increase of 0.64 percentage points as compared to that in 2004. The average equivalent availability factor in 2005 was 92.22%, a decrease of 0.95 percentage points as compared to that in 2004. The nationwide operation reliability of generating units in 2005 was analyzed completely in this paper.

  8. Eurodish-Continuous Operation, System Improvement and Reference Units

    Energy Technology Data Exchange (ETDEWEB)

    Keck, T.; Schiel, W.; Heller, P.; Reinalter, W.; Gineste, J. M.; Ferriere, A.; Flamant, G.

    2006-07-01

    The 10 kWel Dish/Stirling system EuroDish was enhanced. Newly developed and improved components like the ceramic cavity insulation and the control system are described as well as a novel assembly method for the concentrator and a number of improvements and new features of the control software. Country Reference Units were built in Spain, France and Germany and are continuously operated. Operation experiences and performance data are presented. (Author)

  9. 77 FR 62247 - Dynamic Positioning Operations Guidance for Vessels Other Than Mobile Offshore Drilling Units...

    Science.gov (United States)

    2012-10-12

    ...] Dynamic Positioning Operations Guidance for Vessels Other Than Mobile Offshore Drilling Units Operating on... voluntary guidance titled ``Mobile Offshore Drilling Unit Dynamic Positioning Guidance''. The notice recommended owners and operators of Mobile Offshore Drilling Units (MODUs) follow Marine Technology...

  10. The Remote Monitoring System Based on Wireless Digital Radio Portal Crane Machine Operation%基于无线数传电台的门机操作远程监控系统

    Institute of Scientific and Technical Information of China (English)

    熊见林; 刘清; 沈成建; 刘光明

    2011-01-01

    基于港口装卸作业过程中操作监控系统的远程实时监控和分析,提出了基于数传电台的解决方案.系统主要由后台管理计算机平台、系统支撑软件(Windows 2000 Server操作系统、SQL Server2008商业数据库等)和采用C8051F020单片机研制的门机操作记录终端构成,通过数传电台的无线数据通信,实现门机操作记录的数据实时发送到后台管理计算机,从而便于管理人员实时掌握门机司机的作业情况,以便及时做出相应的调度和调配.系统经过实际应用,安装和维护成本低、可扩展性强,数据传输实时性好.%This article is the process of loading and unloading port operations monitoring system, remote real-time monitoring and analysis is proposed based on digital radio solutions. The system is composed of background management computer platform, system support software (Windows 2000 Server operating system, SQL Server2000 commercial databases, etc. ) and developed using C8051F020 microcontroller operating records of the terminal gate structure, through digital radio wireless data communications, to achieve Portal Crane operation real-time data record sent to the admin computer, thus facilitating management of drivers to real-time control door operating conditions in order to make appropriate and timely scheduling and deployment. The system is practical, low cost installation and maintenance, scalability, strong, good real-time data transmission.

  11. Dynamic Optimization Design of Cranes Based on Human–Crane–Rail System Dynamics and Annoyance Rate

    Directory of Open Access Journals (Sweden)

    Yunsheng Xin

    2017-01-01

    Full Text Available The operators of overhead traveling cranes experience discomfort as a result of the vibrations of crane structures. These vibrations are produced by defects in the rails on which the cranes move. To improve the comfort of operators, a nine-degree-of-freedom (nine-DOF mathematical model of a “human–crane–rail” system was constructed. Based on the theoretical guidance provided in ISO 2631-1, an annoyance rate model was established, and quantization results were determined. A dynamic optimization design method for overhead traveling cranes is proposed. A particle swarm optimization (PSO algorithm was used to optimize the crane structural design, with the structure parameters as the basic variables, the annoyance rate model as the objective function, and the acceleration amplitude and displacement amplitude of the crane as the constraint conditions. The proposed model and method were used to optimize the design of a double-girder 100 t–28.5 m casting crane, and the optimal parameters are obtained. The results show that optimization decreases the human annoyance rate from 28.3% to 9.8% and the root mean square of the weighted acceleration of human vibration from 0.59 m/s2 to 0.38 m/s2. These results demonstrate the effectiveness and practical applicability of the models and method proposed in this paper.

  12. Integrated Yard Space Allocation and Yard Crane Deployment Problem in Resource-Limited Container Terminals

    Directory of Open Access Journals (Sweden)

    Caimao Tan

    2016-01-01

    Full Text Available Yard storage space and yard crane equipment are the core resources in the container terminal yard area. This paper studies the integrated yard space allocation (outbound container space and yard crane deployment problem in resource-limited container terminals where yard space and yard cranes are extremely scarce. Two corresponding counterstrategies are introduced, respectively, and the integrated problem is solved as mixed integer programming. The model this paper formulated considers the container volume fluctuation of the service line, and the objective is a trade-off between yard sharing space and terminal operation cost. In numerical experiments, this paper tries to reveal the management meaning in practical operation of container terminal and provides decision support for terminal managers; therefore a series of scenarios are presented to analyze the relations among the yard sharing space, the number of yard cranes, the size of yard subblock, and the cost of terminal operation.

  13. Refining United States Policy on Offensive Cyber Operations

    Science.gov (United States)

    2014-11-01

    address state- sponsored cyber threats with a very different set of tools ranging from diplomacy to kinetic strikes. Categorizing attacks by actor will...AIR COMMAND AND STAFF COLLEGE AIR UNIVERSITY REFINING UNITED STATES POLICY ON OFFENSIVE CYBER OPERATIONS by Max...to offensive cyber warfare, specifically cyber exploitation and cyber attack. Current domestic and international policies lack mechanisms to

  14. Semiconductor Chemical Reactor Engineering and Photovoltaic Unit Operations.

    Science.gov (United States)

    Russell, T. W. F.

    1985-01-01

    Discusses the nature of semiconductor chemical reactor engineering, illustrating the application of this engineering with research in physical vapor deposition of cadmium sulfide at both the laboratory and unit operations scale and chemical vapor deposition of amorphous silicon at the laboratory scale. (JN)

  15. Unit Operation Experiment Linking Classroom with Industrial Processing

    Science.gov (United States)

    Benson, Tracy J.; Richmond, Peyton C.; LeBlanc, Weldon

    2013-01-01

    An industrial-type distillation column, including appropriate pumps, heat exchangers, and automation, was used as a unit operations experiment to provide a link between classroom teaching and real-world applications. Students were presented with an open-ended experiment where they defined the testing parameters to solve a generalized problem. The…

  16. Biomass publications of the forest operations research unit: A synthesis

    Science.gov (United States)

    Dana Mitchell; Renee Ayala; [Compilers

    2005-01-01

    The Forest Operations Unit of the Southern Research Station has been studying biomass-related topics since 1977. This CD aids the reader by organizing these publications in one easy-to-use CD. This CD is comprised of an executive summary, two bibliographies, individual publications (in PDF format), and a keyword listing. The types of publications included on this CD...

  17. Adaptation of Professional Skills in the Unit Operations Laboratory

    Science.gov (United States)

    Rende, Deniz; Rende, Sevinc; Baysal, Nihat

    2012-01-01

    We introduce the design of three consecutive unit operations laboratory (UOL) courses that retain the academic rigor of the course while incorporating skills essential for professional careers, such as ability to propose ideas, develop practical solutions, participate in teamwork, meet deadlines, establish communication between technical support…

  18. Optimization algorithm for quay crane scheduling with finite operation range%带作业范围约束的岸桥调度模型及其算法设计

    Institute of Scientific and Technical Information of China (English)

    范志强

    2015-01-01

    Because of the restrictions of cable pit location and cable length, quay crane can only move along the quayside within a certain range. Considering this practical characteristic, non-crossing and safety constraints, a new mixed integer programming model for quay crane scheduling with operation range constraints is established, which can minimize makes-pan of loading/unloading tasks. Because it is NP-hard in nature, a hybrid simulated annealing algorithm is designed to obtain the near optimal solutions. A heuristics algorithm is developed to find a good initial solution. A mutation operator from GA is proposed to obtain a suitable neighborhood solution which can provide a higher degree of solution diversification. The tabu list concept from the tabu search is adopted and embedded in the framework of the SA algorithm to prevent cycling. Computational experimental results show that the model is effective. The computational time and optimal solu-tion of hybrid SA are superior to simple SA and TS. And the solving efficiency of hybrid SA is better than LINGO soft-ware when the instances become larger.%受电缆线坑位置与缆线长度的限制,岸桥作业只能在一定的横向移动范围之内。考虑到这一现实要求,结合岸桥作业禁止跨越与安全距离等特有约束,以最小化装卸作业的makespan为目标,构建了新的岸桥作业调度混合整数规划模型。针对问题的NP-hard特性,设计了一种混合模拟退火算法,运用启发式算法生成质量较高的初始解,结合遗传算法的变异运算生成邻域新解,增强了解的多样性,引入禁忌搜索算法的禁忌表操作,避免了循环搜索,提高了求解效率。大规模实验结果表明所建立的模型是有效的,算法的求解质量与效率明显优于标准模拟退火算法与禁忌搜索算法。当实验规模逐渐增大时,与LINGO软件相比,算法在求解效率方面的优势越来越明显。

  19. 白鹤梁题刻保护体内潜水作业实践%Diving operation and practice in protection body of White Crane Ridge Inscription

    Institute of Scientific and Technical Information of China (English)

    杨海滨

    2014-01-01

    The maintenance and cleaning of underwater museum of White Crane Ridge Inscription in Three Gorges Reservoir Area depends on diving operation, and the diving in the protection body with special complexity and risk is different from general diving in open water. We first present the diving support system in the protection body, including air feed system, diving control-ling system and submersible transition chamber system. According to the characteristics of diving operation in the protection body and the performance of diving support equipment, and based on the author's rich diving experience and the diving regulations, the equipment requirements and safety precautions of diving operation inside are discussed, and the underwater cultural relics protec-tion attentions are proposed. The diving operation experience, equipment and method are significant valuable to similar underwa-ter project.%长江三峡库区白鹤梁水下题刻保护体内的维护工作需要依靠潜水作业来实现,其潜水不同于一般的开阔水域潜水,具有特有的复杂性和危险性。首先介绍了该保护体的潜水支持系统,如气源供气系统、潜水控制系统、潜水过渡舱系统。根据保护体内潜水作业的特点和潜水支持设备的性能,结合潜水规程和笔者多年潜水作业经验,提出了保护体内潜水的装备要求、安全措施以及保护水下文物的注意事项,其潜水作业经验、设备、方法对类似工程有一定借鉴意义。

  20. Centrifugal microfluidic platforms: advanced unit operations and applications.

    Science.gov (United States)

    Strohmeier, O; Keller, M; Schwemmer, F; Zehnle, S; Mark, D; von Stetten, F; Zengerle, R; Paust, N

    2015-10-01

    Centrifugal microfluidics has evolved into a mature technology. Several major diagnostic companies either have products on the market or are currently evaluating centrifugal microfluidics for product development. The fields of application are widespread and include clinical chemistry, immunodiagnostics and protein analysis, cell handling, molecular diagnostics, as well as food, water, and soil analysis. Nevertheless, new fluidic functions and applications that expand the possibilities of centrifugal microfluidics are being introduced at a high pace. In this review, we first present an up-to-date comprehensive overview of centrifugal microfluidic unit operations. Then, we introduce the term "process chain" to review how these unit operations can be combined for the automation of laboratory workflows. Such aggregation of basic functionalities enables efficient fluidic design at a higher level of integration. Furthermore, we analyze how novel, ground-breaking unit operations may foster the integration of more complex applications. Among these are the storage of pneumatic energy to realize complex switching sequences or to pump liquids radially inward, as well as the complete pre-storage and release of reagents. In this context, centrifugal microfluidics provides major advantages over other microfluidic actuation principles: the pulse-free inertial liquid propulsion provided by centrifugal microfluidics allows for closed fluidic systems that are free of any interfaces to external pumps. Processed volumes are easily scalable from nanoliters to milliliters. Volume forces can be adjusted by rotation and thus, even for very small volumes, surface forces may easily be overcome in the centrifugal gravity field which enables the efficient separation of nanoliter volumes from channels, chambers or sensor matrixes as well as the removal of any disturbing bubbles. In summary, centrifugal microfluidics takes advantage of a comprehensive set of fluidic unit operations such as

  1. Workspace design for crane cabins applying a combined traditional approach and the Taguchi method for design of experiments.

    Science.gov (United States)

    Spasojević Brkić, Vesna K; Veljković, Zorica A; Golubović, Tamara; Brkić, Aleksandar Dj; Kosić Šotić, Ivana

    2016-01-01

    Procedures in the development process of crane cabins are arbitrary and subjective. Since approximately 42% of incidents in the construction industry are linked to them, there is a need to collect fresh anthropometric data and provide additional recommendations for design. In this paper, dimensioning of the crane cabin interior space was carried out using a sample of 64 crane operators' anthropometric measurements, in the Republic of Serbia, by measuring workspace with 10 parameters using nine measured anthropometric data from each crane operator. This paper applies experiments run via full factorial designs using a combined traditional and Taguchi approach. The experiments indicated which design parameters are influenced by which anthropometric measurements and to what degree. The results are expected to be of use for crane cabin designers and should assist them to design a cabin that may lead to less strenuous sitting postures and fatigue for operators, thus improving safety and accident prevention.

  2. Measures of coherence-generating power for quantum unital operations

    Science.gov (United States)

    Zanardi, Paolo; Styliaris, Georgios; Campos Venuti, Lorenzo

    2017-05-01

    Given an orthonormal basis B in a d -dimensional Hilbert space and a unital quantum operation E acting on it, one can define a nonlinear mapping that associates with E a d ×d real-valued matrix that we call the coherence matrix of E with respect to B . This is the Gram matrix of the coherent part of the basis projections of B under E . We show that one can use this coherence matrix to define vast families of measures of the coherence-generating power (CGP) of the operation. These measures have a natural geometrical interpretation as separation of E from the set of incoherent unital operations. The probabilistic approach to CGP discussed in P. Zanardi et al. [Phys. Rev. A 95, 052306 (2017)., 10.1103/PhysRevA.95.052306] can be reformulated and generalized, introducing, alongside the coherence matrix, another d ×d real-valued matrix, the simplex correlation matrix. This matrix describes the relevant statistical correlations in the input ensemble of incoherent states. Contracting these two matrices, one finds CGP measures associated with the process of preparing the given incoherent ensemble and processing it with the chosen unital operation. Finally, in the unitary case, we discuss how these concepts can be made compatible with an underlying tensor product structure by defining families of CGP measures that are additive.

  3. Disseminated visceral coccidiosis in whooping cranes

    Science.gov (United States)

    Carpenter, J.W.; Spraker, T.R.; Novilla, M.N.

    1980-01-01

    Three 13- to 18-day-old whooping cranes (Grus americana) and a 9-year-old whooping crane died in outdoor pens at the Patuxent Wildlife Research Center. The deaths were associated with an overwhelming systemic infection by an intracellular protozoan parasite, which resulted in enteritis, granulomatous bronchopneumonia, hepatitis, splenitis, and myocarditis. The clinical, histopathologic, and electron microscopic findings were similar to those in sandhill cranes (Grus canadensis) at the Patuxent Center found to be infected with Eimeria reichenowi and E gruis. Since these eimerian species also parasitize wild whooping cranes, this parasite might be an important pathogenic agent for this species.

  4. 桥式起重机大车偏斜运行时水平侧向力的危害与控制%Hazard and Control of Lateral Load Deflection of Bridge Crane Operation

    Institute of Scientific and Technical Information of China (English)

    郑长亮

    2014-01-01

    由于各种原因,桥式起重机(以下简称起重机)大车在运行时会产生偏斜,这时起重机会对大车轨道产生水平侧向力而直接作用在车轮轮缘上,使车轮加速磨损,对大车传动机构、桥架结构、厂房结构都会造成很大的危害,从而影响到起重机和厂房的使用寿命。文章认为起重机在长时间运行过程中,水平侧向力的产生不可避免,如何有效地控制,是文章主要研究的内容。%Because of various reasons, the bridge crane (hereinafter referred to as the crane cart) will generate deflection at run time. At this time, the crane generates lateral force on the track and directly impose on thewheel rim, which will accelerate the wear of wheel, and do great harm to the transmission mechanism, the bridge structure, building structurethus affect the lifespan of the crane and workshop. This paper belives lateral force is inevitable in the long-time running of crane and mainly researches how to effectively control the generation of lateral force.

  5. Advanced Transport Operating System (ATOPS) control display unit software description

    Science.gov (United States)

    Slominski, Christopher J.; Parks, Mark A.; Debure, Kelly R.; Heaphy, William J.

    1992-01-01

    The software created for the Control Display Units (CDUs), used for the Advanced Transport Operating Systems (ATOPS) project, on the Transport Systems Research Vehicle (TSRV) is described. Module descriptions are presented in a standardized format which contains module purpose, calling sequence, a detailed description, and global references. The global reference section includes subroutines, functions, and common variables referenced by a particular module. The CDUs, one for the pilot and one for the copilot, are used for flight management purposes. Operations performed with the CDU affects the aircraft's guidance, navigation, and display software.

  6. Modeling and Simulation of Quay Crane Control System for PID Controller Optimal Parameters Determination

    OpenAIRE

    Tomas Eglynas; Audrius Senulis; Marijonas Bogdevičius; Arūnas Andziulis; Mindaugas Jusis

    2016-01-01

    The main control object of Quay crane, which is operating in seaport intermodal terminal cargo loading and unloading process, is the crane trolley. One of the main frequent problem, which occurs, is the swinging of the container. This swinging is caused not only by external forces but also by the movement of the trolley. The research results of recent years produced various types of control algorithms by the other researchers. The control algorithms are solving separate control problems of Qu...

  7. Load test with the mobile telescopic crane (160 T) for handling LHC magnets

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    CERN has taken delivery of a new telescopic mobile crane. The new crane will be required to load LHC dipole magnets made in Building SM18 onto a trailer that will take them to the Prévessin site, where they will be put in storage until they can be lowered into the tunnel. It has passed its first operating tests, which consisted of lifting a 37-tonne concrete block.

  8. Improving Quay Cranes Exploitation by Implementing a Port Equipment Management System

    Directory of Open Access Journals (Sweden)

    Cristina Dragomir

    2011-09-01

    Full Text Available Port operators use almost all type of port equipments, from a range of heavy equipments to light machines. Port activities efficiency can be achieved by improving the exploitation of the necessary port equipment for handling cargo. Objectives of research are based on establishing factors that influence management activities of quay cranes exploitation. A better exploitation management of quay cranes can be achieved by implementing a proper port equipment management system

  9. Stability Analysis for Operation of DG Units in Smart Grids

    DEFF Research Database (Denmark)

    Pouresmaeil, Edris; Shaker, Hamid Reza; Mehrasa, Majid

    2015-01-01

    This paper presents a multifunction control strategy for the stable operation of Distributed Generation (DG) units during grid integration. The proposed control model is based on Direct Lyapunov Control (DLC) theory and provides a stable region for the appropriate operation of DG units during grid...... integration. Using DLC technique in DG technology can provide the continuous injection of maximum active power in fundamental frequency from the DG source to the grid, compensating all reactive power and harmonic current components of grid-connected loads through the integration of DG link into the grid....... Application of this concept can guarantee to reduce the stress on the grid during the energy demand peak. Simulation results are presented to demonstrate the proficiency and performance of the proposed DLC technique in DG technology....

  10. Development and operation of 1 MW wind power unit

    Energy Technology Data Exchange (ETDEWEB)

    Seleznev, I.; Lavrov, V. [Machine-building Design Bureau, (Russian Federation)

    1996-12-31

    Development of wind power units (WPUs), which operate on renewable wind power, as well as combined power sources including WPUs, have an important national economic significance in the Russian Federation, particularly in the areas of construction and operation of nuclear power plants, hydro-electric stations and other traditional power plants. Development of WPUs of high power level is a complicated task, and the solution requires investigations in the areas of experimental design, technology, and the organization of industrial production. Initially, the problem of the development of large diameter propellers, power electric equipment, reducers and drive mechanisms, automatic control devices, and control and diagnostic system need to be solved. This report covers the basic results and directions of the work of the Machine-building Design Bureau `Raduga` in the field of wind power engineering as well as the basic performance of the units. (author). 7 figs.

  11. [Operational units for health risk management (patient safety)].

    Science.gov (United States)

    Pardo Hernández, A; Claveria Fontán, A; García Urbaneja, M; López Barba, J

    2008-12-01

    In 1995 INSALUD began to develop performance measures in the field of risk management, and following transfer of powers to the regions, these led to the development of operational units in individual healthcare centres. These units, which consist of a group of health professionals, including managers, aim to identify, evaluate, analyse and deal with health risks, to enhance patient safety. Their organisational structure can vary in accordance with the needs, resources and philosophy of each individual organisation. This paper presents the experience of the risk management units developed in four Spanish regions: Madrid, the Basque Country, Galicia and INGESA (Ceuta and Melilla). It also includes reflections on assessment of their impact and on their future role in improving safety in healthcare services.

  12. Analysis of viral clearance unit operations for monoclonal antibodies.

    Science.gov (United States)

    Miesegaes, George; Lute, Scott; Brorson, Kurt

    2010-06-01

    Demonstration of viral clearance is a critical step in assuring the safety of biotechnology products. We generated a viral clearance database that contains product information, unit operation process parameters, and viral clearance data from monoclonal antibody and antibody-related regulatory submissions to FDA. Here we present a broad overview of the database and resulting analyses. We report that the diversity of model viruses tested expands as products transition to late-phase. We also present averages and ranges of viral clearance results by Protein A and ion exchange chromatography steps, low pH chemical inactivation, and virus filtration, focusing on retro- and parvoviruses. For most unit operations, an average log reduction value (LRV, a measure of clearance power) for retrovirus of >4 log(10) were measured. Cases where clearance data fell outside of the anticipated range (i.e., outliers) were rationally explained. Lastly, a historical analysis did not find evidence of any improvement trend in viral clearance over time. The data collectively suggest that many unit operations in general can reliably clear viruses.

  13. Customized overhead cranes for installation of India's largest 3.6m optical telescope at Devasthal, Nainital, India

    Science.gov (United States)

    Bangia, Tarun; Yadava, Shobhit; Kumar, Brijesh; Ghanti, A. S.; Hardikar, P. M.

    2016-07-01

    India's largest 3.6 m aperture optical telescope facility has been recently established at Devasthal site by Aryabhatta Research Institute of Observation Sciences (ARIES), an autonomous Institute under Department of Science and Technology, Government of India. The telescope is equipped with active optics and it is designed to be used for seeinglimited observations at visible and near-infrared wavelengths. A steel building with rotating cylindrical steel Dome was erected to house 3.6m telescope and its accessories at hilltop of Devasthal site. Customized cranes were essentially required inside the building as there were space constraints around the telescope building for operating big external heavy duty cranes from outside, transportation constraints in route for bringing heavy weight cranes, altitude of observatory, and sharp bends etc. to site. To meet the challenge of telescope installation from inside the telescope building by lifting components through its hatch, two Single Girder cranes and two Under Slung cranes of 10 MT capacity each were specifically designed and developed. All the four overhead cranes were custom built to achieve the goal of handling telescope mirror and its various components during installation and assembly. Overhead cranes were installed in limited available space inside the building and tested as per IS 3177. Cranes were equipped with many features like VVVFD compatibility, provision for tandem operation, digital load display, anti-collision mechanism, electrical interlocks, radio remote, low hook height and compact carriage etc. for telescope integration at site.

  14. WTP Waste Feed Qualification: Glass Fabrication Unit Operation Testing Report

    Energy Technology Data Exchange (ETDEWEB)

    Stone, M. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Hanford Missions Programs; Newell, J. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Process Technology Programs; Johnson, F. C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Engineering Process Development; Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Engineering Process Development

    2016-07-14

    The waste feed qualification program is being developed to protect the Hanford Tank Waste Treatment and Immobilization Plant (WTP) design, safety basis, and technical basis by assuring waste acceptance requirements are met for each staged waste feed campaign prior to transfer from the Tank Operations Contractor to the feed receipt vessels inside the Pretreatment Facility. The Waste Feed Qualification Program Plan describes the three components of waste feed qualification: 1. Demonstrate compliance with the waste acceptance criteria 2. Determine waste processability 3. Test unit operations at laboratory scale. The glass fabrication unit operation is the final step in the process demonstration portion of the waste feed qualification process. This unit operation generally consists of combining each of the waste feed streams (high-level waste (HLW) and low-activity waste (LAW)) with Glass Forming Chemicals (GFCs), fabricating glass coupons, performing chemical composition analysis before and after glass fabrication, measuring hydrogen generation rate either before or after glass former addition, measuring rheological properties before and after glass former addition, and visual observation of the resulting glass coupons. Critical aspects of this unit operation are mixing and sampling of the waste and melter feeds to ensure representative samples are obtained as well as ensuring the fabrication process for the glass coupon is adequate. Testing was performed using a range of simulants (LAW and HLW simulants), and these simulants were mixed with high and low bounding amounts of GFCs to evaluate the mixing, sampling, and glass preparation steps in shielded cells using laboratory techniques. The tests were performed with off-the-shelf equipment at the Savannah River National Laboratory (SRNL) that is similar to equipment used in the SRNL work during qualification of waste feed for the Defense Waste Processing Facility (DWPF) and other waste treatment facilities at the

  15. Offshore Wind Payload Transfer Using Flexible Mobile Crane

    Directory of Open Access Journals (Sweden)

    Magnus B. Kjelland

    2015-01-01

    Full Text Available This article presents an offshore-simulated loading and unloading of a payload from a floating platform to a fixed structure. The experiments are performed in a dry-lab, where a Stewart platform is used to simulate the motion of the vessel. A hydraulically actuated vehicle loader crane is used to perform the tasks of payload transfer. The crane includes a hydraulic winch where the wire force is measured by a load cell. A mathematical model of the winch is derived and is experimentally verified. The control strategies include a heave compensation and a constant tension mode. A motion reference unit is used to generate the reference motion of the moving platform. Experimental results show the wire force while performing the load cases. This paper shows the advantage of using a reference motion as a feed forward control reference, instead of only relying on the constant tension.

  16. Method and apparatus for operating an improved thermocline storage unit

    Science.gov (United States)

    Copeland, Robert J.

    1985-01-01

    A method and apparatus for operating a thermocline storage unit in which an insulated barrier member is provided substantially at the interface region between the hot and cold liquids in the storage tank. The barrier member physically and thermally separates the hot and cold liquids substantially preventing any diffusing or mixing between them and substantially preventing any heat transfer therebetween. The barrier member follows the rise and fall of the interface region between the liquids as the tank is charged and discharged. Two methods of maintaining it in the interface region are disclosed. With the structure and operation of the present invention and in particular the significant reduction in diffusing or mixing between the hot and cold liquids as well as the significant reduction in the thermal heat transfer between them, the performance of the storage tank is improved. More specifically, the stability of the interface region or thermocline is enhanced and the thickness of the thermocline is reduced producing a corresponding increase in the steepness of the temperature gradient across the thermocline and a more efficiently operating thermocline storage unit.

  17. The United States national volcanic ash operations plan for aviation

    Science.gov (United States)

    Albersheim, Steven; Guffanti, Marianne

    2009-01-01

    Volcanic-ash clouds are a known hazard to aviation, requiring that aircraft be warned away from ash-contaminated airspace. The exposure of aviation to potential hazards from volcanoes in the United States is significant. In support of existing interagency operations to detect and track volcanic-ash clouds, the United States has prepared a National Volcanic Ash Operations Plan for Aviation to strengthen the warning process in its airspace. The US National Plan documents the responsibilities, communication protocols, and prescribed hazard messages of the Federal Aviation Administration, National Oceanic and Atmospheric Administration, US Geological Survey, and Air Force Weather Agency. The plan introduces a new message format, a Volcano Observatory Notice for Aviation, to provide clear, concise information about volcanic activity, including precursory unrest, to air-traffic controllers (for use in Notices to Airmen) and other aviation users. The plan is online at http://www.ofcm.gov/p35-nvaopa/pdf/FCM-P35-2007-NVAOPA.pdf. While the plan provides general operational practices, it remains the responsibility of the federal agencies involved to implement the described procedures through orders, directives, etc. Since the plan mirrors global guidelines of the International Civil Aviation Organization, it also provides an example that could be adapted by other countries.

  18. Article separation apparatus and method for unit operations

    Science.gov (United States)

    Pardini, Allan F.; Gervais, Kevin L.; Mathews, Royce A.; Hockey, Ronald L.

    2010-06-22

    An apparatus and method are disclosed for separating articles from a group of articles. The apparatus includes a container for containing one or more articles coupled to a suitable fluidizer for suspending articles within the container and transporting articles to an induction tube. A portal in the induction tube introduces articles singly into the induction tube. A vacuum pulls articles through the induction tube separating the articles from the group of articles in the container. The apparatus and method can be combined with one or more unit operations or modules, e.g., for inspecting articles, assessing quality of articles, or ascertaining material properties and/or parameters of articles, including layers thereof.

  19. Feasibility Study for Operable Unit 7-13/14

    Energy Technology Data Exchange (ETDEWEB)

    K. Jean Holdren

    2007-05-29

    The Subsurface Disposal Area is a radioactive waste landfill located within the Radioactive Waste Management Complex at the Idaho National Laboratory Site in southeastern Idaho. This Feasibility Study for Operable Unit 7-13/14 analyzes options for mitigating risks to human health and the environment associated with the landfill. Analysis is conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act, using nine evaluation criteria to develop detailed and comparative analysis of five assembled alternatives. Assembled alternatives are composed of discrete modules. Ultimately, decision-makers will select, recombine, and sum various modules into an optimized preferred alternative and final remedial decision.

  20. CTS (Hermes): United States experiments and operations summary

    Science.gov (United States)

    Donoughe, P. L.; Hunczak, H. R.

    1977-01-01

    The Communications Technology Satellite, launched in January 1976 and embodying the highest power transmitter in a communications satellite, was considered. As a joint program between the U.S. and Canada, close coordination of the two countries was necessitated since the management and control of experiments were done in real time. Criteria used by NASA for acceptance of the United States experiments are noted and acceptance procedures are discussed. The category for each accepted experiment is given. The modus operandi employed for the U.S. experiments in the areas of management, coordination, liaison, and real time operation are described. Some of the highlights associated with satellite utilization are given.

  1. A Three Dimensional Simulation Method of the Gantry Crane

    Directory of Open Access Journals (Sweden)

    Jingsong LI

    2013-04-01

    Full Text Available Until now, many companies have developed lots of the port machinery remote monitoring systems. However, these monitoring systems usual display the operating status of the port machinery by the schematic diagram, Legend and data. The presentation of information is unable to describe the status of the large number of port machinery. In order to solve the problem, a three-dimensional simulation method of the gantry crane based on the WPF is proposed. This paper studies WPF technology and 3D modeling techniques, on this basis, proposes a kind of the gantry crane 3D simulation method based on WPF, establishes a new generation monitoring system based on 3D, immersive and interactive real-time simulation environment. This system could simulate the real-time 3D virtual scene of the gantry crane, and real-time 3D analog display port machinery running posture and operating environment. Experiments show that CPU and memory usage rate is low enough when the system is running.

  2. Toward a warfighter's associate: eliminating the operator control unit

    Science.gov (United States)

    Everett, Hobart R.; Pacis, Estrellina B.; Kogut, Greg; Farrington, Nathan M.; Khurana, S.

    2004-12-01

    In addition to the challenges of equipping a mobile robot with the appropriate sensors, actuators, and processing electronics necessary to perform some useful function, there coexists the equally important challenge of effectively controlling the system"s desired actions. This need is particularly critical if the intent is to operate in conjunction with human forces in a military application, as any low-level distractions can seriously reduce a warfighter"s chances of survival in hostile environments. Historically there can be seen a definitive trend towards making the robot smarter in order to reduce the control burden on the operator, and while much progress has been made in laboratory prototypes, all equipment deployed in theatre to date has been strictly teleoperated. There exists a definite tradeoff between the value added by the robot, in terms of how it contributes to the performance of the mission, and the loss of effectiveness associated with the operator control unit. From a command-and-control perspective, the ultimate goal would be to eliminate the need for a separate robot controller altogether, since it represents an unwanted burden and potential liability from the operator"s perspective. This paper introduces the long-term concept of a supervised autonomous Warfighter"s Associate, which employs a natural-language interface for communication with (and oversight by) its human counterpart. More realistic near-term solutions to achieve intermediate success are then presented, along with actual results to date. The primary application discussed is military, but the concept also applies to law enforcement, space exploration, and search-and-rescue scenarios.

  3. Mycotoxin-induced disease in captive whooping cranes (Grus americana) and sandhill cranes (Grus canadensis)

    Science.gov (United States)

    Olsen, G.H.; Carpenter, J.W.; Gee, G.F.; Thomas, N.J.; Dein, F.J.

    1995-01-01

    In 1987, an epizootic in cranes at the Patuxent Wildlife Research Center, Laurel, Maryland, USA, caused illness in 80% of 300 captive whooping cranes (Grus americana) and sandhill cranes (Grus canadensis) and death of 15 of these cranes. Gross pathology findings were inconclusive and consisted of dehydration, atrophy of fat, renal insufficiency, and small spleens. Extensive testing resulted in isolation of Fusarium sp. mold from constituents of the grain-based diet. Low levels of two mycotoxins, T2 (1-2 ppm) and deoxynivalenol (0.4 ppm), were isolated from the pelleted feed.

  4. Whooping crane recovery activities : April - September, 2006

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Summary of whooping crane recovery activities for April through September 2006 for the Aransas/Wood Buffalo flock, the Florida non-migratory flock, and captive...

  5. Mississippi Sandhill Crane NWR Forest Management Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Mississippi Sandhill Crane NWR Forest Management Plan is a general plan which outlines the Refuge management objectives, forest description, forest management...

  6. Crane Scheduling on a Plate Storage

    DEFF Research Database (Denmark)

    Hansen, Jesper

    2002-01-01

    OSS produces the worlds largest container ships. The first process of producing the steel ships is handling arrival and storage of steel plates until they are needed in production. Two gantry cranes carry out this task. The planning task is now to create a schedule of movements for the 2 cranes...... without collision, that delivers the plates needed for the given day and minimizes costs....

  7. Speciation of Black-necked Crane

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Based on the concepts of species and speciation,the speciation of Black-necked Grane(Grus nigricollis) was discussed using bio-geographic principles and some evidences suggest that Black-necked Grane had a close relationship with Red-crowned Crane(Grus japonensis).The Qinghai-Tibetan Plateau uplift may be the most important factor in allopatric speciation for Black-necked Crane.

  8. Ensuring Operational Readiness: Private Military Contractor Support for the United States Air Force

    Science.gov (United States)

    2017-03-15

    Ensuring Operational Readiness: Private Military Contractor Support for the United States Air Force A Monograph by Maj Stephen P. Joca United...States Air Force School of Advanced Military Studies United States Army Command and General Staff College Fort Leavenworth, Kansas 2017 Approved...Operational Readiness: Private Military Contractor Support for the United States Air Force Approved by: __________________________________, Monograph

  9. Particle Emissions from District Heating Units Operating on Solid Biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Wierzbicka, Aneta [Lund Inst. of Technology (Sweden). Div. of Ergonomics and Aerosol Technology

    2005-06-01

    With the increasing interest in the use of biofuels for heat and energy generation there is a growing concern about emissions from their combustion. It has been shown that biofuel furnaces emit relatively high quantities of particulate matter in comparison to natural gas and light fuel oil furnaces. Majority of the emitted particulates are smaller than 10 {mu}m with high contribution of fine (<2.5 {mu}m) and submicron (<1 {mu}m) particles. These fine particles tend to be the most troublesome: in ambient air they have been associated with adverse health effects. Submicron particles are difficult to capture in the available particle removal technologies. The aim of this study was to characterise particle emissions from district heating units operating on three commonly used biofuels, namely sawdust. pellets and forest residues. Boilers were of moving grate type. with the maximum thermal output between 1 and 1.5 MW. The measurements were done after multi cyclones, the only particle removal devices installed, therefore the direct emissions to ambient air were characterised. Influence of type of the fuel and operation load on particle emissions was investigated. Furthermore, collection efficiencies of electrostatic precipitator (ESP) and flue gas condenser, used particle separation devices in 6 MW unit, were investigated. It has been shown that in all cases large amounts of fuel particles containing heavy metals are being emitted to the atmosphere, even though the studied district heating units meet the current mass concentration emission limit requirements. Total number concentration of emitted particles with aerodynamic diameter smaller than 5 {mu}m ranged from 3 to 8x10{sup 7} particles/cm{sub n}{sup 3} with the slightly higher values from combustion of forest residues. Both mass and total number concentrations were dominated by submicron particles contribution. Elements determined by Particle Induced X-rays Emission (PIXE) analysis (Z>12) contributed to 21-34 % of

  10. Improved Models to Integrated Berth Allocation-Quay Crane Assignment Problem: A Computational Comparison and Novel Solution Approaches

    DEFF Research Database (Denmark)

    Iris, Cagatay; Pacino, Dario; Røpke, Stefan

    heavily relies on the efficiency of quay cranes operations, and the usage of the berthing area. Optimizing the allocation of ships to berth and the related assignment of cranes are important problems that are mostly covered as two separate cases in the literature. However, since the handling time...... of the vessels primarily depends on the number of containers to be handled and the number of cranes deployed, it would be beneficial to consider the integration of those two problems. This work extends the state-of-the-art by strengthening the current best mathematical formulation. Computational experiments...

  11. Development of swing-free / shock free crane

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, J. S.; Park, B. S.; Kim, S. H.; Kwon, D. A.; Kim, D. W.; Kim, J. H.; Jeon, B. K. [Korea Atomic Research Institute, Taejon (Korea, Republic of); Lee, Y. E.; Lee, S. H. [Bando Machinery Co., Taejon (Korea, Republic of)

    1999-04-01

    To develop the automatized crane and to apply the relevant technology to nuclear power plants, in this project and automatized crane control system is developed along with a swing and shock crane. Also, this technology has been transferred to Bando Machinery Co. Ltd. The drive mechanism of crane is designed by adopting vector drives which provide soft acceleration and deceleration characteristics. Also, radio modems and a long-range laser displacement sensor which are commercially available are introduced to accommodate the large scaled crane systems. Also, several devices are developed for the automation of crane system. These are a crane controller, a supervisory controller, a angle measuring device, and laser localizer, a drum grapple device, and crane supervisory program. The performance of developed crane system is revealed to rapidly reduce the residual swingof the transported object and precisely controls the object position in any case. Also, the laser localizer provides he capability of measuring any arbitrary located objects within 3 cm error range.

  12. Study on an Interactive Truck Crane Simulation Platform Based on Virtual Reality Technology

    Science.gov (United States)

    Sang, Yong; Zhu, Yu; Zhao, Honghua; Tang, Mingyan

    2016-01-01

    The modern web-based distance education overcomes space-time restriction of the traditional teaching forms. However, being short of specifically observable and operable experimental equipment makes the web-based education lack advantages in the knowledge learning progress, which needs strong stereoscopic effect and operability. Truck crane is the…

  13. Study on an Interactive Truck Crane Simulation Platform Based on Virtual Reality Technology

    Science.gov (United States)

    Sang, Yong; Zhu, Yu; Zhao, Honghua; Tang, Mingyan

    2016-01-01

    The modern web-based distance education overcomes space-time restriction of the traditional teaching forms. However, being short of specifically observable and operable experimental equipment makes the web-based education lack advantages in the knowledge learning progress, which needs strong stereoscopic effect and operability. Truck crane is the…

  14. A note on a model for quay crane scheduling with non-crossing constraints

    DEFF Research Database (Denmark)

    Santini, Alberto; Friberg, Henrik Alsing; Røpke, Stefan

    2015-01-01

    This article studies the quay crane scheduling problem with non-crossing constraints, which is an operational problem that arises in container terminals. An enhancement to a mixed integer programming model for the problem is proposed and a new class of valid inequalities is introduced. Computatio......This article studies the quay crane scheduling problem with non-crossing constraints, which is an operational problem that arises in container terminals. An enhancement to a mixed integer programming model for the problem is proposed and a new class of valid inequalities is introduced....... Computational results show the effectiveness of these enhancements in solving the problem to optimality....

  15. Fatality trends in United Nations Peacekeeping Operations, 1948-1998.

    Science.gov (United States)

    Seet, B; Burnham, G M

    2000-08-02

    The rising number of deaths among United Nations (UN) peacekeeping forces after the Cold War has made some troop-contributing countries hesitant to participate in peacekeeping operations. While the number and scale of missions have increased, no data have demonstrated a parallel increase in risks to peacekeepers. To determine the association of characteristics of UN peacekeeping operations with risks and mortality rates among UN peacekeeping forces in both the Cold War and post-Cold War periods. Descriptive analysis of 1559 personnel deaths during 49 UN peacekeeping missions from 1948-1998 based on the casualty database maintained by Department of Peacekeeping Operations, UN Headquarters. Number and percentage of deaths by circumstance, total crude death rate, and crude death rate and relative risk of death by circumstance (hostile acts, unintentional violence, and illness or other causes) and time period (Cold War vs post-Cold War), geographic region, and nature of peacekeeping response; and regression analysis of mission variables (strength, duration, and humanitarian mandate) associated with total number of deaths. More deaths have occurred among UN peacekeeping forces in the past decade alone than in the previous 40 years of UN peacekeeping (807 vs 752), but crude death rates did not differ significantly by time period (Cold War vs post-Cold War, 21.8 vs 21. 2 deaths per 10,000 person-years; P =.58), level of peacekeeping response, or for geographic regions other than East Europe and Central America, where rates were lower (PCold War (relative risk [RR] 1. 51; 95% confidence interval [CI], 1.22-1.88), while rates for deaths caused by unintentional violence decreased (RR, 0.79; 95% CI, 0.67-0. 94) but remain high, particularly in the Middle East and Asia (RR, 1. 39; 95% CI, 1.15-1.69). Regression analysis showed a significant association between number of deaths and the strength (PCold War rather than increased RR of death. Post-Cold War peacekeeping personnel

  16. Operations research in intensive care unit management: a literature review.

    Science.gov (United States)

    Bai, Jie; Fügener, Andreas; Schoenfelder, Jan; Brunner, Jens O

    2016-08-12

    The intensive care unit (ICU) is a crucial and expensive resource largely affected by uncertainty and variability. Insufficient ICU capacity causes many negative effects not only in the ICU itself, but also in other connected departments along the patient care path. Operations research/management science (OR/MS) plays an important role in identifying ways to manage ICU capacities efficiently and in ensuring desired levels of service quality. As a consequence, numerous papers on the topic exist. The goal of this paper is to provide the first structured literature review on how OR/MS may support ICU management. We start our review by illustrating the important role the ICU plays in the hospital patient flow. Then we focus on the ICU management problem (single department management problem) and classify the literature from multiple angles, including decision horizons, problem settings, and modeling and solution techniques. Based on the classification logic, research gaps and opportunities are highlighted, e.g., combining bed capacity planning and personnel scheduling, modeling uncertainty with non-homogenous distribution functions, and exploring more efficient solution approaches.

  17. Cajun Maritime expands gas production platform with help from Liebherr crane

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2009-09-15

    The South Marsh Island (SMI) Block 217 platform is a productive offshore natural gas handling hub in the Gulf of Mexico's Flatrock multiple reservoir deep-gas discovery. This one platform alone could increase natural gas production in the United States by 13 per cent. Louisiana-based Cajun Maritime LLC is the specialized marine subsidiary of the civil and mechanical contracting group Cajun Industries. The company focuses on maintaining a safe working environment at all times. The company purchased a new Liebherr LR 1300 lattice boom crawler crane for the Flatrock project because of its quality, lifting capacity and price. This article described the features of the crane that make it particularly suitable for offshore drilling, such as sealed bearings, big engine, high line pull, and the unique ability to move the main boom and luffing jib simultaneously while under load. The LR 1300 was used for several major installations, including pipelines, a new service crane and a water treatment deck platform. The safety features of the LR 1300 include a reeving winch which is used to install the lifting cables; the small diameter reeving winch cable is much easier to handle than the old method of hand pulling; and riggers are not required to walk the boom of the crane. The cab computer is useful in low overhead clearance work and completely removes the human error factor. The electronic hydraulic controls eliminate the risk of accidental load loss often associated with old-style friction cranes. 3 figs.

  18. Feature Comparison in Structural Health Monitoring of a Vehicle Crane

    Directory of Open Access Journals (Sweden)

    J. Kullaa

    2008-01-01

    Full Text Available Vibration-based structural health monitoring of a vehicle crane was studied. The performance of different features to detect damage was investigated after eliminating the normal operational variations using factor analysis. Using eight accelerometers, ten AR parameters from each record were identified for damage detection. Also transmissibilities between sensors were estimated. Damage was introduced with additional masses at different locations of the structure. All damage cases could be detected from either features using control charts, but transmissibilities proved to be more sensitive to damage than the AR coefficients.

  19. Sandhill and whooping cranes: ancient voices over America's wetlands

    National Research Council Canada - National Science Library

    Johnsgard, Paul A

    2011-01-01

    .... "I suspect, " he says, "that the migrating cranes of a pre-ice age period some ten million years ago would fully understand every nuance of the crane conversation going on today along the Platte...

  20. A mathematical model for optimal tower crane layout planning

    Directory of Open Access Journals (Sweden)

    Mojtaba Hosseini

    2017-09-01

    Full Text Available Tower cranes, on today’s typical building construction sites, are the centerpiece of production, hoisting and transporting of a variety of loads. Due to a simple crane limited capacity; there is an urgent need to use high capacity cranes such as tower cranes. However, we have to select an appropriate type of cranes to be utilized to reduce the associated coste as much as possible. In this research, we propose a method to select the suitable type of crane and locate the best place for crane erection based on a minimum radius for requested crane and minimum cost. To fulfill the target, a computer program is designed to numerate these problems, demonstrating an example explaining how to apply the program and the results are discussed.

  1. Whooping crane recovery activities : October, 2010 - August, 2011

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report is on the recovery of whooping cranes, with a focus on the Aransas-Wood Buffalo population (AWBP). Highlights of the report include the whooping crane...

  2. FOCU:S--future operator control unit: soldier

    Science.gov (United States)

    O'Brien, Barry J.; Karan, Cem; Young, Stuart H.

    2009-05-01

    The U.S. Army Research Laboratory's (ARL) Computational and Information Sciences Directorate (CISD) has long been involved in autonomous asset control, specifically as it relates to small robots. Over the past year, CISD has been making strides in the implementation of three areas of small robot autonomy, namely platform autonomy, Soldier-robot interface, and tactical behaviors. It is CISD's belief that these three areas must be considered as a whole in order to provide Soldiers with useful capabilities. In addressing the Soldier-robot interface aspect, CISD has begun development on a unique dismounted controller called the Future Operator Control Unit: Soldier (FOCU:S) that is based on an Apple iPod Touch. The iPod Touch's small form factor, unique touch-screen input device, and the presence of general purpose computing applications such as a web browser combine to give this device the potential to be a disruptive technology. Setting CISD's implementation apart from other similar iPod or iPhone-based devices is the ARL software that allows multiple robotic platforms to be controlled from a single OCU. The FOCU:S uses the same Agile Computing Infrastructure (ACI) that all other assets in the ARL robotic control system use, enabling automated asset discovery on any type of network. Further, a custom ad hoc routing implementation allows the FOCU:S to communicate with the ARL ad hoc communications system and enables it to extend the range of the network. This paper will briefly describe the current robotic control architecture employed by ARL and provide short descriptions of existing capabilities. Further, the paper will discuss FOCU:S specific software developed for the iPod Touch, including unique capabilities enabled by the device's unique hardware.

  3. Book review: A chorus of cranes: The cranes of North America and the world

    Science.gov (United States)

    Pearse, Aaron T.

    2017-01-01

    Cranes (Gruidae) are widely distributed throughout the world, have lived on Earth for several million years, and currently reside on five continents. Archaeological evidence and historical references suggest that humans have interacted with and been captivated by cranes for many thousands of years (e.g., Leslie 1988, Muellner 1990). A glimpse of our reverence for these birds can be found in A Chorus of Cranes by Paul A. Johnsgard, with photographs by Thomas D. Mangelsen. Many species of cranes are currently identified as threatened or endangered, and their future will likely rest in the hands of humans; this book presents their plight and some of the measures that have been taken to conserve them. Dr. Johnsgard, an emeritus professor at the University of Nebraska-Lincoln, is a prolific writer, having written more than 60 books in ornithology and other topics. This book serves as the latest update of previous efforts concerning crane biology, conservation, and management. A review without making comparisons to his past works is difficult, yet this assessment will primarily focus on the content of the current book, with little reference to past endeavors.A Chorus of Cranes: The Cranes of North America and the World by Paul A. Johnsgard. 2015. University Press of Colorado, Boulder, CO, USA. x + 208 pp., 38 color photographs, 41 figures. ISBN 978-1-60732-436-2. $23.95 (Ebook). ISBN 978-1-60732-436-9.

  4. Is fumigation enough for air conditioning units in operation theatres and Intensive care units?

    Directory of Open Access Journals (Sweden)

    Anasua Deb

    2016-05-01

    Full Text Available Background: Strict asepsis is necessary in operating theatres (OT and intensive care units (ICU as the patients undergo invasive procedures. The filters of contaminated air conditioning (AC units provide a niche for proliferation of fungi and production of fungal spores. Methods: The routine procedure for maintenance of sterile atmosphere in our hospital, i.e. fumigation and mopping walls with disinfectants often fail to address these fungal spores of the AC filters. We therefore carried out a surveillance of the ACs in ICUs and OTs to find the level of contamination with fungal spores and also to improvise on intervention strategies to tackle the problem. Over 3 months period, 34 ACs from 7 OTs and 2 ICUs were screened by taking 2 swabs from each AC which were then tested for the presence of fungal spores as per standard methods. Results: The contamination rate was 88.2% before fumigation and 76.9% after fumigation. The fungal spore contamination rate was reduced to 20% (1 out of 5 ACs after servicing of the ACs was done. Aspergillus spp. was the most common fungal isolate. Conclusion: Based on the observations, we recommend regular servicing of the ACs as well as wet mopping of the ducts with sporicidal solution at regular intervals. [Int J Res Med Sci 2016; 4(5.000: 1583-1589

  5. The Future of Information Operations in the United States Army

    Science.gov (United States)

    2007-01-01

    as Marketing Marketing tools and concepts could generate support for coalition military operations just as an advertiser promoting a commercial...military, the advanced application of marketing tools to leverage humanitarian assistance and public affairs within an Information Operations plan

  6. Overview of Crane Control Systems and the Related Problems: Analysis of Container Oscillation Using Different Types of Cargoes

    Directory of Open Access Journals (Sweden)

    Tomas Eglynas

    2016-04-01

    Full Text Available Growing international trading increased cargo transportation in containers, therefore the port cranes have higher loads. Increased cargo flows can influence transportation safety. It is therefore necessary to review the crane systems and determine what factors might influence the volatility of the container and its cargo during transportation. The paper includes consideration and analysis of crane control systems and related problems. The authors consider the reasons of problems, probable damage and solution methods. The paper also provides the analysis of the relationship between different container cargoes and container oscillations occurring during handling operations using a container crane prototype. The analysis of the effect of different cargoes in containers on loading process and the results of occurring oscillations are presented.

  7. Geographic distribution of the mid-continent population of sandhill cranes and related management applications

    Science.gov (United States)

    Krapu, Gary L.; Brandt, David A.; Jones, Kenneth L.; Johnson, Douglas H.

    2011-01-01

    -makers in the United States, Canada, Mexico, and Russia with improved guidance for developing sound harvest regulations, focusing conservation efforts, and generating collaborative efforts among these nations on sandhill crane research and management to meet mutually important goals.

  8. 46 CFR 109.437 - Crane record book.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information...

  9. Management of Quay Crane Exploitation in Constanta Harbour Area

    OpenAIRE

    Surugiu Gheorghe; Dragomir Cristina

    2011-01-01

    Most of the quay crane work activites can be reported to the following five functions of management: planning, organizing, staffing, directing and controlling. Taking into consideration the connection between management functions and management of quay crane exploitation, the work of the craner can be improved. This paper presents the functions of management applied to quay crane exploitation.

  10. Influencing Tomorrow: A Study of Emerging Influence Techniques and Their Relevance to United States Information Operations

    Science.gov (United States)

    2015-06-12

    groups and governmental institutions; the possibility of economic loss directed at entrepreneurs; or the prospect of United States undue influence or... INFLUENCING TOMORROW: A STUDY OF EMERGING INFLUENCE TECHNIQUES AND THEIR RELEVANCE TO UNITED STATES INFORMATION OPERATIONS A...

  11. Slew Cranes in Shipyards: A Study

    Science.gov (United States)

    1985-01-01

    exception to this rule is that when a heavy-load, double-boom crane has a multiple hoist tackle of 12 or 16 falls, the rope seems to have about the same...Contributing Editor: Dr. James Pinnells Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of information is...benefit of a level luffing rope-store is worth the extra cost; in any case a single-boom crane with top-mounted race bearing is again the most cost

  12. U.S. Department of the Interior Fish and Wildlife Service : Environmental Assessment : Final (1/2011) for Proposed Hunting Plan for Crane Meadows National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The United States Fish and Wildlife Service is proposing to provide hunting opportunities on Crane Meadows National Wildlife Refuge in Little Falls, Minnesota that...

  13. United States Military in Central Asia: Beyond Operation Enduring Freedom

    Science.gov (United States)

    2009-10-23

    Malinowski , advocacy director for Human Rights Watch, stated, “the United States is most effective in promoting liberty around the world when people...26 U.S. President, The National Security Strategy of the United States of America, page? 27 Thomas Malinowski , “Testimony

  14. Operational air quality forecast guidance for the United States

    Science.gov (United States)

    Stajner, Ivanka; Lee, Pius; Tong, Daniel; Pan, Li; McQueen, Jeff; Huang, Jinaping; Djalalova, Irina; Wilczak, James; Huang, Ho-Chun; Wang, Jun; Stein, Ariel; Upadhayay, Sikchya

    2016-04-01

    NOAA provides operational air quality predictions for ozone and wildfire smoke over the United States (U.S.) and predictions of airborne dust over the contiguous 48 states at http://airquality.weather.gov. These predictions are produced using U.S. Environmental Protection Agency (EPA) Community Model for Air Quality (CMAQ) and NOAA's HYSPLIT model (Stein et al., 2015) with meteorological inputs from the North American Mesoscale Forecast System (NAM). The current efforts focus on improving test predictions of fine particulate matter (PM2.5) from CMAQ. Emission inputs for ozone and PM2.5 predictions include inventory information from the U.S. EPA and recently added contributions of particulate matter from intermittent wildfires and windblown dust that rely on near real-time information. Current testing includes refinement of the vertical grid structure in CMAQ and inclusion of contributions of dust transport from global sources into the U.S. domain using the NEMS Global Aerosol Capability (NGAC). The addition of wildfire smoke and dust contributions in CMAQ reduced model underestimation of PM2.5 in summertime. Wintertime overestimation of PM2.5 was reduced by suppressing emissions of soil particles when the terrain is covered by snow or ice. Nevertheless, seasonal biases and biases in the diurnal cycle of PM2.5 are still substantial. Therefore, a new bias correction procedure based on an analog ensemble approach was introduced (Djalalova et al., 2015). It virtually eliminates biases in monthly means or in the diurnal cycle, but it also reduces day-to-day variability in PM2.5 predictions. Refinements to the bias correction procedure are being developed. Upgrades for the representation of wildfire smoke emissions within the domain and from global sources are in testing. Another area of active development includes approaches to scale emission inventories for nitrogen oxides in order to reproduce recent changes observed by the AirNow surface monitoring network and by

  15. A note on a model for quay crane scheduling with non-crossing constraints

    DEFF Research Database (Denmark)

    Santini, Alberto; Friberg, Henrik Alsing; Røpke, Stefan

    2015-01-01

    This article studies the quay crane scheduling problem with non-crossing constraints, which is an operational problem that arises in container terminals. An enhancement to a mixed integer programming model for the problem is proposed and a new class of valid inequalities is introduced. Computatio...

  16. Ergonomic design of crane cabins: a case study from a steel plant in India.

    Science.gov (United States)

    Ray, Pradip Kumar; Tewari, V K

    2012-01-01

    The study, carried out at the Batch Annealing Furnace (BAF) shop of Cold Rolling Mill (CRM) at an integrated steel plant of India, concerns ergonomic evaluation and redesign of a manually-operated Electrical Overhead Travelling (EOT) crane cabin. The crane cabin is a complex worksystem consisting of the crane operator and twelve specific machine components embedded in a closed workspace. A crane operator has to perform various activities, such as loading and unloading of coils, setting and removal of convector plates, and routine maintenance work. Initially, an operator had to work in standing posture with bent back most of the time. Ergonomically poor design of the chair and the controls, awkward work postures, and insufficient vision angle resulting in musculoskeletal disorders (MSDs) are some of the critical problems observed.. The study, conceived as an industry-academia joint initiative, was undertaken by a design team, the members of which were drawn from both the company concerned and the institute. With the project executed successfully, a number of lessons, such as how to minimize the anthropometric mismatch, how to improve the layout of the components and controls within enclosed workspace, and how to improve work posture minimizing risk of MSDs have been learned.

  17. Toeplitz Operators on Dirichlet-Type Space of Unit Ball

    Directory of Open Access Journals (Sweden)

    Jin Xia

    2014-01-01

    Full Text Available We construct a function u in L2Bn, dV which is unbounded on any neighborhood of each boundary point of Bn such that Toeplitz operator Tu is a Schatten p-class 0operator on Dirichlet-type space DBn, dV. Then, we discuss some algebraic properties of Toeplitz operators with radial symbols on the Dirichlet-type space DBn, dV. We determine when the product of two Toeplitz operators with radial symbols is a Toeplitz operator. We investigate the zero-product problem for several Toeplitz operators with radial symbols. Furthermore, the corresponding commuting problem of Toeplitz operators whose symbols are of the form ξku is studied, where k ∈ Zn, ξ ∈ ∂Bn, and u is a radial function.

  18. Are whooping cranes destined for extinction? Climate change imperils recruitment and population growth.

    Science.gov (United States)

    Butler, Matthew J; Metzger, Kristine L; Harris, Grant M

    2017-04-01

    Identifying climatic drivers of an animal population's vital rates and locating where they operate steers conservation efforts to optimize species recovery. The population growth of endangered whooping cranes (Grus americana) hinges on juvenile recruitment. Therefore, we identify climatic drivers (solar activity [sunspots] and weather) of whooping crane recruitment throughout the species' life cycle (breeding, migration, wintering). Our method uses a repeated cross-validated absolute shrinkage and selection operator approach to identify drivers of recruitment. We model effects of climate change on those drivers to predict whooping crane population growth given alternative scenarios of climate change and solar activity. Years with fewer sunspots indicated greater recruitment. Increased precipitation during autumn migration signified less recruitment. On the breeding grounds, fewer days below freezing during winter and more precipitation during breeding suggested less recruitment. We predicted whooping crane recruitment and population growth may fall below long-term averages during all solar cycles when atmospheric CO2 concentration increases, as expected, to 500 ppm by 2050. Species recovery during a typical solar cycle with 500 ppm may require eight times longer than conditions without climate change and the chance of population decline increases to 31%. Although this whooping crane population is growing and may appear secure, long-term threats imposed by climate change and increased solar activity may jeopardize its persistence. Weather on the breeding grounds likely affects recruitment through hydrological processes and predation risk, whereas precipitation during autumn migration may influence juvenile mortality. Mitigating threats or abating climate change should occur within ≈30 years or this wild population of whooping cranes may begin declining.

  19. Toeplitz Operators with Quasihomogeneous Symbols on the Bergman Space of the Unit Ball

    Directory of Open Access Journals (Sweden)

    Bo Zhang

    2012-01-01

    symbols on the Bergman space of the unit ball equals a Toeplitz operator with quasihomogeneous symbols. We also characterize finite-rank semicommutators or commutators of two Toeplitz operators with quasihomogeneous symbols.

  20. SINGLE FIXED CRANE OPTIMISATION WITHIN A DISTRIBUTION CENTRE

    Directory of Open Access Journals (Sweden)

    J. Matthews

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: This paper considersthe optimisation of the movement of a fixed crane operating in a single aisle of a distribution centre. The crane must move pallets in inventory between docking bays, storage locations, and picking lines. Both a static and a dynamic approach to the problem are presented. The optimisation is performed by means of tabu search, ant colony metaheuristics,and hybrids of these two methods. All these solution approaches were tested on real life data obtained from an operational distribution centre. Results indicate that the hybrid methods outperform the other approaches.

    AFRIKAANSE OPSOMMING: Die optimisering van die beweging van 'n vaste hyskraan in 'n enkele gang van 'n distribusiesentrum word in hierdie artikel beskou. Die hyskraan moet pallette vervoer tussen dokhokke, stoorposisies, en opmaaklyne. Beide 'n statiese en 'n dinamiese benadering tot die probleem word aangebied. Die optimisering word gedoen met behulp van tabu-soektogte, mierkolonieoptimisering,en hibriede van hierdie twee metodes. Al die oplossingsbenaderings is getoets met werklike data wat van 'n operasionele distribusiesentrum verkry is. Die resultate toon aan dat die hibriedmetodes die beste oplossings lewer.

  1. The "Crane Problem" in Journalism Historiography.

    Science.gov (United States)

    Marmarelli, Ron

    Attempting to correct and amplify the portrayal of Stephen Crane in journalism history, this paper provides an analysis of relevant works in journalism and other disciplines in order to point out the weaknesses in the journalism historiography and to show how they apparently came about. Evidence is presented from the literature of journalism,…

  2. Crane Scheduling for a Plate Storage

    DEFF Research Database (Denmark)

    Hansen, Jesper; Clausen, Jens

    2002-01-01

    Odense Steel Shipyard produces the worlds largest container ships. The first process of producing the steel ships is handling arrival and storage of steel plates until they are needed in production. This paper considers the problem of scheduling two cranes that carry out the movements of plates...

  3. Phase I remedial investigation report for the 300-FF-5 operable unit, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-01-01

    The focus of this remedial investigation (RI) is the 300-FF-5 operable unit, one of five operable units associated with the 300 Area aggregate of the U.S. Department of Energy`s (DOE`s) Hanford Site. The 300-FF-5 operable unit is a groundwater operable unit beneath the 300-FF-1, 300-FF-2, and 300-FF-3 source operable units. This operable unit was designated to include all contamination detected in the groundwater and sediments below the water table that emanates from the 300-FF-1, 300-FF-2, and 300-FF-3 operable units (DOE-RL 1990a). In November 1989, the U.S. Environmental Protection Agency (EPA) placed the 300 Area on the National Priorities List (NPL) contained within Appendix B of the National Oil and Hazardous Substance Pollution Contingency Plan (NCP, 53 FR 51391 et seq.). The EPA took this action pursuant to their authority under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA, 42 USC 9601 et seq.). The DOE Richland Operations Office (DOE-RL), the EPA and Washington Department of Ecology (Ecology) issued the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement), in May 1989 (Ecology et al. 1992, Rev. 2). This agreement, among other matters, governs all CERCLA efforts at the Hanford Site. In June 1990, a remedial investigation/feasibility study (RI/FS) workplan for the 300-FF-5 operable unit was issued pursuant to the Tri-Party Agreement.

  4. Modelling and Simulation of Mobile Hydraulic Crane with Telescopic Arm

    DEFF Research Database (Denmark)

    Nielsen, Brian; Pedersen, Henrik Clemmensen; Andersen, Torben Ole

    2005-01-01

    paper a model of a loader crane with a flexible telescopic arm is presented, which may be used for evaluating control strategies. The telescopic arm is operated by four actuators connected hydraulically by a parallel circuit. The operating sequences of the individual actuators is therefore...... not controllable, but depends on the flow from the common control valve, flow resistances between the actuators and friction. The presented model incorporates structural flexibility of the telescopic arm and is capable of describing the dynamic behaviour of both the hydraulic and the mechanical system, including...... the relative movement of the individual mechanical bodies in the telescopic arm. The model is verified through comparisons between simulated and measured results for various operating conditions....

  5. Head-bobbing behavior in walking whooping cranes (Grus americana) and sandhill cranes (Grus canadensis)

    Science.gov (United States)

    Cronin, Thomas W.; Kinloch, Matthew R.; Olsen, Glenn H.

    2007-01-01

    Head-bobbing is a common and characteristic behavior of walking birds. While the activity could have a relatively minor biomechanical function, for balance and stabilization of gait, head-bobbing is thought to be primarily a visual behavior in which fixation of gaze alternates with a forward movement that generates visual flow. We studied head-bobbing in locomoting whooping cranes (Grus americana) and sandhill cranes (Grus canadensis), using food strewn on the ground to motivate them to walk or run. When the cranes walked, head-bobbing proceeded in a four-step sequence that was closely linked to the stepping cycle. The time available for gaze stabilization decreased with travel speed, and running cranes did not head-bob at all. As a crane extended its bill towards the ground for food, it also exhibited a series of short head-bobs that were not associated with forward travel. Head-bobbing is a flexible behavior that varies with gait and with visual search, most notably as the cranes prepare to strike with the bill.

  6. 77 FR 29701 - Impact of Construction (Under a Combined License) of New Nuclear Power Plant Units on Operating...

    Science.gov (United States)

    2012-05-18

    ... a Combined License) of New Nuclear Power Plant Units on Operating Units at Multi-Unit Sites AGENCY... a COL intending to construct and operate new nuclear power plants (NPPs) on multi-unit sites to... Impacts of Construction (under a Combined License) of New Nuclear Power Plants on Operating Units at...

  7. 78 FR 16302 - Crystal River Unit 3 Nuclear Generating Plant, Application for Amendment to Facility Operating...

    Science.gov (United States)

    2013-03-14

    ... From the Federal Register Online via the Government Publishing Office NUCLEAR REGULATORY COMMISSION Crystal River Unit 3 Nuclear Generating Plant, Application for Amendment to Facility Operating... Operating License No. DPR-72 for the Crystal River Unit 3 Nuclear Generating Plant (CR-3), located in...

  8. Analysis Methods and Models for Small Unit Operations

    Science.gov (United States)

    2006-07-01

    methods are called for. TNO report I TNO-DV 2006 A228 9 /22 Efect Figure I Effect Based Operations framework. In practice, Figure 1 is useful when trying to...11, 111, IV, V Re-establishing communications Transport support (drivers, vehicles) Support to crowd and Riot Control (CRC) operations Support to... communicate opponent opponent intel gewonnen Verkennings- Reconnaissance Waarnemen terrein Observe terrain Inlichtingen over Gathered intel on patrouille

  9. An Innovative Method for Dynamic Characterization of Fan FilterUnit Operation.

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Tengfang

    2006-12-21

    Fan filter units (FFU) are widely used to deliver re-circulated air while providing filtration control of particle concentration in controlled environments such as cleanrooms, minienvironments, and operating rooms in hospitals. The objective of this paper is to document an innovative method for characterizing operation and control of an individual fan filter unit within its operable conditions. Built upon the draft laboratory method previously published [1] , this paper presents an updated method including a testing procedure to characterize dynamic operation of fan filter units, i.e., steady-state operation conditions determined by varied control schemes, airflow rates, and pressure differential across the units. The parameters for dynamic characterization include total electric power demand, total pressure efficiency, airflow rate, pressure differential across fan filter units, and airflow uniformity.

  10. Microchannel apparatus comprising plural microchannels and methods of conducting unit operations

    Science.gov (United States)

    Wegeng, Robert S [Richland, WA; TeGrotenhuis, Ward E [Kennewick, WA; Whyatt, Greg A [West Richland, WA

    2009-03-10

    Microchannel apparatus comprising a header and plural flow microchannels is described in which orifices connect the header and the flow microchannels. The orifices constrict flow. The ratio of the cross-sectional area of each of the orifices to the cross-sectional area of the flow microchannels connected to the orifices is between 0.0005 and 0.1. Also described is microchannel apparatus for conducting unit operations in which a device comprises two arrays of microchannels, and a unit operation is conducted on a fluid as it passes through the first set of microchannels and into a header where a second unit operation is performed, and then the fluid stream passes into the second array of microchannels where the first unit operation is again performed. Methods of conducting unit operations in the apparatuses are also described.

  11. Taking into account the possibility of sliding in earthquake response of overhead cranes; Prise en compte de la possibilite d`un glissement des ponts roulants lors d`un tremblement de terre

    Energy Technology Data Exchange (ETDEWEB)

    Guihot, P.; Papin, M.H.; Sark, K.

    1995-01-01

    In nuclear power plants, large-size overhead cranes, such as reactor building crane and turbine building crane used for transporting heavy loads on the operation floor, and call for safety and reliability even during strong earthquake. The possibility of sliding at the interface between the travelling crane and the supporting railway significantly reduces the vibration energy transmitted. We propose in this paper an experimental and numerical study performed on a simplified scale model. A simplified modal method is developed in order to take into account this possibility in the seismic analysis and design of sliding structures. (authors). 7 refs., 12 figs., 2 tabs.

  12. Double Girder Bridge Crane with Double Cycling: Scheduling Strategy and Performance Evaluation

    Directory of Open Access Journals (Sweden)

    Dandan Wang

    2014-01-01

    Full Text Available This paper introduces a novel quay crane design, double girder bridge crane (DGBC. DGBC is capable of handling containers of two adjacent bays simultaneously, avoiding crane collisions, saving travelling and reposition cost, and eventually improving terminal efficiency. This problem is formulated as a resource-constrained project scheduling with objective to minimize the maximum completion time. A two-stage heuristic algorithm is proposed in which an operating sequences on each bay is obtained by double cycling, and the integrated timetable for both bays is constructed by solving resource conflicts using the proposed minimum cost strategy. We examine effectiveness and performance of applying DGBC with double cycling. A case study is presented to illustrate how DGBC works with the two-stage method. Three extreme cases with respective conflict types are investigated to develop the performance bounds of DGBC with double cycling. The results show that DGBC can significantly improve terminal productivity, and outperforms single girder crane in both makespan and the lift operation percentage. The highest DGBC efficiency does not require maximum double cycles in two bay schedules; rather the integrated timetable for two bays is the main contribution to the DGBC performance as it yields better cooperation between two spreaders and the driver.

  13. Proposed Continental Operations Range. United States Air Force.

    Science.gov (United States)

    1974-06-01

    Fallon, Battle Motutain, Francis Peak, and Cedar City. Other COR non-participating ertities to be linked to COR Central to promote cooperation in...qualities worth retain’ng: friendliness, and toleration of privacy. "So it is a valid fear that some of thebe valued traditions will be lost with the...by sheep during the winter months from November 1 to April 30. (;razing units In the Battle Mountain Grazing district of the BL, in the northern part

  14. United States Air Force Role in Mass Atrocity Response Operations

    Science.gov (United States)

    2012-05-17

    through the lens of their own perspective. They cannot view the world objectively because of their own preconceptions : history, prejudices, ideology...initial stages of the genocide. Similarly, the RC-135’s ability to detect and locate those stations would provide the perfect target for strikes having...all levels. Air Force unit exercises would integrate air power, focusing on those specific tasks required in a MARO. These training exercises , in

  15. On Point: The United States Army in Operation Iraqi Freedom

    Science.gov (United States)

    2004-01-01

    Captain Matthew Paul and Sergeant Jose Adorno , Task Force 2-7 IN mortar platoon, walked down the road the unit had used earlier to enter the airport...than 10 seconds later, the ground rumbled with the sound of approaching armor once again, and Captain Paul and Sergeant Adorno turned to move out of...road; Sergeant Adorno sprinted off to the right. Winding through the trees and bushes screening Four Corners, he was back with the mortar platoon in

  16. Parallel Operation Characteristics Analysis of Sewage Source Heat Pump Units in Winter

    Institute of Scientific and Technical Information of China (English)

    庄兆意; 张承虎; 王海燕; 孙德兴

    2010-01-01

    Sewage source heat pump unit operates under partial load most of the time, and study on the law of coefficient of performance (COP) of the unit varying with load ratio can provide basis for the heat pump units running in high efficiency. A mathematical model determining COP, evaporation temperature and condensation temperature of a single unit was proposed. Under the condition of uniform load distribution, the model was established according to different ways of bearing partial load with the same type multi...

  17. Use of ultralight aircraft for introducing migratory crane populations

    Science.gov (United States)

    Clegg, K.R.; Lewis, J.C.; Ellis, D.H.; Urbanek, Richard P.; Stahlecker, Dale

    1997-01-01

    Objectives were to determine if captive-reared cranes could be led behind an ultralight aircraft (UL) along a migration route and, if after release on a wintering area, they would integrate with wild cranes and migrate north in spring to their natal area without assistance. Greater sandhill cranes (Grus canadensis tabida) were used as the research surrogate for whooping cranes (Grus americana). In 1995, the senior author raised 15 cranes to fledging and trained them to respond to his vocal imitation of a sandhill crane brood call. Chicks learned to follow him as he walked, drove an all-terrain vehicle (ATV), or piloted an UL. The caretakers were not in crane costumes. Cranes were tame but allowed to roam at will without accompanying humans part of the day and were penned at night. Daily excursions provided exposure to habitats, foods, and predators the birds would encounter after release into the wild. In mid-October 1995, 11 radio-tagged cranes were led in migration from Grade, Idaho to Bosque del Apache National Wildlife Refuge (BdANWR), central New Mexico, and released near wild wintering sandhill cranes. The 1,204km migration took 11 days, including 1 day when the aircraft were grounded due to a winter storm. Hazards encountered enroute included mountainous terrain, turbulent air, and attacks by gold eagles (Aquila chrysaetos). On the wintering ground, hazards included crane hunters and coyotes (Canis latrans). Within 2 days after release at the BdANWR wintering site, the research cranes were associating with and imitating the behavior of wild cranes. The 4 surviving birds migrated north in spring 1996 and at the time of this writing 2 were within 53 km of their natal area in Idaho.

  18. United Nations Operations: Who Should be in Charge?

    Science.gov (United States)

    1994-04-01

    Cold War; Panama, Iraq, and the New World Order, in RIGHT V. MIGHT, supra note 16, at 109, 128; and HANS KELSON, THE LAW OF THE UNITED NATIONS 928...interpretation would also appear to resolve Kelsen’s dilemma (see KELSEN , supra note 35, at 935) with respect to the Korean conflict. Kelsen argues the Security...and Scheffer, supra note 35, at 131. 45. See D. J. HARRIS, CASES AND MATERIAL ON INTERNATIONAL LAW 681 (4th ed. 1991); KELSEN , supra note 35, at 756

  19. Selecting Foreign Languages for United States Army Special Operations Forces

    Science.gov (United States)

    2006-06-16

    Portugal 170,000,000 7 RUSSIAN [RUS] Russia 170,000,000 8 JAPANESE [JPN] Japan 125,000,000 9 GERMAN, STANDARD [GER] Germany 98,000,000 10 CHINESE, WU...took place (Birtle 2004, Ch 2). Operations in Mexico, Cuba, Russia , and the Philippines are examples of US expeditionary forces deployed to areas...Department of the Army civilians, and retirees. The programs available are free of charge and are for either beginners or people seeking to increase or

  20. Operational Encirclements: Can the United States Military Decisively Follow Through?

    Science.gov (United States)

    2009-05-21

    friction that trickles down onto the battlefield. The European theatre during World War II was no different. The failure of American, and British...American and their Allied partners would continue to experience the ill-effects of it right up until the end of the war in the European theatre ...on Friday 27 March 2009 about Operation Anaconda. I used some information from our conversation. The following is verbatim from my monograph, "A

  1. The United States Army Operating Concept, 2016-2028

    Science.gov (United States)

    2010-08-19

    retrograde operations. f. Theater armies may also include a medical command for deployment support that provides health services to Army and other...tenets of jus in bello ,120 discrimination (between combatants and noncombatants), and proportionality in the use of force,121 measured against the...Barracks, PA, 19. (Used with permission.) 119 Biddle, 9. 120 Jus in bello , translated as justice in war, are agreements defining limits on acceptable

  2. Tactical Unit Data and Decision Requirements for Urban Operations

    Science.gov (United States)

    2008-10-01

    decision requirements useful in urban operations. DISCLAIMER: The contents of this report are not to be used for advertising , publication, or...Building Function Verify mosque and identify possi- ble schools or meeting places Identify types of cinema (stage/theatre) or other similar nearby...Determine mosque and residen- tial floor plans Interior layout of cinema and high-rises Layout of power control facilities Improved Dismounted & Mounted

  3. Biota of the 300-FF-1 operable unit. [Westinghouse Hanford Company

    Energy Technology Data Exchange (ETDEWEB)

    Rickard, W.H. Jr.; Fitzner, R.E.; Brandt, C.A.

    1990-10-01

    This report summarizes Task 5a-2 of the Phase I Remedial Investigation -- Operable Unit Characterization of the 300-FF-1 Operable Unit on the Hanford Site, near Richland, Washington. The ultimate goal of Phase I is to determine the nature and extent of the threat to public health and the environment from releases of hazardous substances from the operable unit. The purpose of Task 5a-2 was to determine what species inhabit the 300-FF-1 Operable Unit and how they use the unit. The focus is on those species listed as endangered or threatened, those that are economically important, or those that constitute significant components of the human food chain. 39 refs., 5 figs., 5 tabs.

  4. Metalimnobia crane flies (Diptera: Limoniidae) from Korea.

    Science.gov (United States)

    Podenas, Sigitas; Byun, Hye-Woo

    2016-06-30

    Korean species of the crane fly genus Metalimnobia Matsumura, 1911 (Diptera: Limoniidae), are taxonomically revised. Metalimnobia (Metalimnobia) channpayna new species, is described and figured, M. (M.) bifasciata (Schrank, 1781), M. (M.) quadrinotata (Meigen, 1818) and M. (M.) zetterstedti (Tjeder, 1968) are listed for the first time in Korea, new information for previously known species, M. (M.) quadrimaculata (Linnaeus, 1760) is added. Identification key for all Korean Metalimnobia species is given. Wings, male and female terminalia are illustrated for all species.

  5. Tower Cranes in Shipyards: A Study

    Science.gov (United States)

    1986-01-01

    NEW ORLEANS, LOUISIANA by WALTER P. MANNING, JR., EMSCOR, HOUSTON DIETER WEINREICH, MAN-WOLFFKRAN, HEILBRONN Contributing Editor: Dr James Pinnells ...error is almost invariably to blame. Even the (very rare) cases of metal fatigue are the result of prolonged overloading or of failure to retire a crane...manufacturer or distributor should always be consulted in case of doubt. 5.2.1. Infrastructures -- the Kev to Balanced Forces AS examples of possible

  6. Artificial insemination of cranes with frozen semen

    Science.gov (United States)

    Gee, G.F.; Sexton, T.J.; Lewis, J.C.

    1979-01-01

    For the first time (1978) artificial insemination (AI) with frozen greater sandhill crane (Grus canadensis tabida) semen resulted in fertile eggs and chicks. During the 2 year (1977-78) study, 6 of 27 eggs produced were fertile. Three chicks hatched. Semen samples used for insemination were frozen and stored in liquid nitrogen for two months or less. Recent improvements in the laboratory indicated that a more effective sample can be prepared and greater fertility rates should be expected.

  7. Operational Optimization of Large-Scale Parallel-Unit SWRO Desalination Plant Using Differential Evolution Algorithm

    Directory of Open Access Journals (Sweden)

    Jian Wang

    2014-01-01

    Full Text Available A large-scale parallel-unit seawater reverse osmosis desalination plant contains many reverse osmosis (RO units. If the operating conditions change, these RO units will not work at the optimal design points which are computed before the plant is built. The operational optimization problem (OOP of the plant is to find out a scheduling of operation to minimize the total running cost when the change happens. In this paper, the OOP is modelled as a mixed-integer nonlinear programming problem. A two-stage differential evolution algorithm is proposed to solve this OOP. Experimental results show that the proposed method is satisfactory in solution quality.

  8. ST-HM not only cranes

    CERN Document Server

    Bertone, C

    2002-01-01

    This period of LEP dismantling and LHC installation is a real challenge for the ST-HM group. The group is now following several projects to cope with the diversity of requests. Although crane design and procurement still constitutes the majority of the workload, more and more of our time is nowadays dedicated to providing alternative handling solutions. In 2001/2002, our main studies concern cranes for LHC, industrial and shielded motorised doors, the upgrade/replacement of 32 lifts and mobile cranes. The years 2002/2003 will concern mainly the study of LHC handling systems such as trailers and heavy-duty tractors, specifically tailored containers and tools. In parallel, the monorail will be extended in the injection tunnel and CNGS tunnels and a new monorail system for TOF will be installed. Since the tunnel monorail infrastructure will be used for power feed and guidance purposes only, this requires that other transport systems be studied, such as forklift trucks, industrial and telescopic hoists.

  9. Avian tuberculosis and salmonellosis in a whooping crane (Grus americana)

    Science.gov (United States)

    Stroud, R.K.; Thoen, C.O.; Duncan, R.M.

    1986-01-01

    The whooping crane has been the subject of intensive scientific study and management because it is an endangered species and has high public interest. Programs have been developed to identify critical habitat, to increase production through captive breeding, and in recent years, to use sandhill cranes (Grus canadensis) as surrogate parents in establishing new populations of wild whooping cranes. Only a few reports describing diseases and parasites in wild whooping cranes appear in the literature because opportunities to secure specimens are limited for this rare, protected bird (for review, see Carpenter and Derrickson, In Proc. International Crane Workshop of 1983, Bharatur, India, in press). Avian tuberculosis and concurrent salmonellosis in a wild whooping crane are described in this case report.

  10. Research of Embedded Tower Crane Monitoring System Based on FCS

    Directory of Open Access Journals (Sweden)

    Xijian Zheng

    2013-09-01

    Full Text Available To compensate for the lack of traditional safety limit device of tower crane, a design scheme of embedded tower crane intelligent monitoring system based on Fieldbus Control System was proposed. By this, online collection and transmission of tower crane real-time conditions were achieved, which could effectively improve the reliability and anti-interference of the system. Embedded development technology was used to build ARM-based master control platform. Embedded Linux cross-compiler environment was also built. Combining with embedded programming software, human-computer interaction interface of tower crane intelligent monitoring system was built, storage and display of tower crane’s online parameters were also realized. The use of the technology has opened up a new field of tower crane condition monitoring application. The research of this paper may provide reference for tower crane safety monitoring and fault diagnosing.

  11. Hospital markup and operation outcomes in the United States.

    Science.gov (United States)

    Gani, Faiz; Ejaz, Aslam; Makary, Martin A; Pawlik, Timothy M

    2016-07-01

    Although the price hospitals charge for operations has broad financial implications, hospital pricing is not subject to regulation. We sought to characterize national variation in hospital price markup for major cardiothoracic and gastrointestinal operations and to evaluate perioperative outcomes of hospitals relative to hospital price markup. All hospitals in which a patient underwent a cardiothoracic or gastrointestinal procedure were identified using the Nationwide Inpatient Sample for 2012. Markup ratios (ratio of charges to costs) for the total cost of hospitalization were compared across hospitals. Risk-adjusted morbidity, failure-to-rescue, and mortality were calculated using multivariable, hierarchical logistic regression. Among the 3,498 hospitals identified, markup ratios ranged from 0.5-12.2, with a median markup ratio of 2.8 (interquartile range 2.7-3.9). For the 888 hospitals with extreme markup (greatest markup ratio quartile: markup ratio >3.9), the median markup ratio was 4.9 (interquartile range 4.3-6.0), with 10% of these hospitals billing more than 7 times the Medicare-allowable costs (markup ratio ≥7.25). Extreme markup hospitals were more often large (46.3% vs 33.8%, P markup ratio compared with 19.3% (n = 452) and 6.8% (n = 35) of nonprofit and government hospitals, respectively. Perioperative morbidity (32.7% vs 26.4%, P markup hospitals. There is wide variation in hospital markup for cardiothoracic and gastrointestinal procedures, with approximately a quarter of hospital charges being 4 times greater than the actual cost of hospitalization. Hospitals with an extreme markup had greater perioperative morbidity. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. Control strategies for crane systems: A comprehensive review

    Science.gov (United States)

    Ramli, Liyana; Mohamed, Z.; Abdullahi, Auwalu M.; Jaafar, H. I.; Lazim, Izzuddin M.

    2017-10-01

    Crane systems are tremendously utilised in numerous heavy load transportation industries, and therefore, the control of crane systems is a well-established research field. As the last review paper was published more than a decade ago, there is a lack of collected and organised information regarding the latest and the newest updates on control strategies for crane control systems. Hence, this paper presents a comprehensive review of crane control strategies discussing the latest research works during the years from 2000 to 2016. Various crane types and control issues are highlighted, followed by the main focus of this paper, an extensive review of the control schemes for diverse types of crane systems that have been carried out in the 21st century. A brief review on modelling of single-pendulum and double-pendulum crane systems is also given. In addition, anti-sway control systems for industrial cranes that are available on the market is described. This paper summarises most of the related work and also pays a special focus on research trends regarding the control of crane systems that have been previously published in the literature. It is envisaged that this review paper will be helpful to new researchers when identifying research directions for this particular area of interest.

  13. Research on Multidisciplinary Optimization Design of Bridge Crane

    Directory of Open Access Journals (Sweden)

    Tong Yifei

    2013-01-01

    Full Text Available Bridge crane is one of the most widely used cranes in our country, which is indispensable equipment for material conveying in the modern production. In this paper, the framework of multidisciplinary optimization for bridge crane is proposed. The presented research on crane multidisciplinary design technology for energy saving includes three levels, respectively: metal structures level, transmission design level, and electrical system design level. The shape optimal mathematical model of the crane is established for shape optimization design of metal structure level as well as size optimal mathematical model and topology optimal mathematical model of crane for topology optimization design of metal structure level is established. Finally, system-level multidisciplinary energy-saving optimization design of bridge crane is further carried out with energy-saving transmission design results feedback to energy-saving optimization design of metal structure. The optimization results show that structural optimization design can reduce total mass of crane greatly by using the finite element analysis and multidisciplinary optimization technology premised on the design requirements of cranes such as stiffness and strength; thus, energy-saving design can be achieved.

  14. The Speed Control of Constant Tension Motor of Marine Crane

    Directory of Open Access Journals (Sweden)

    Chen Xinyang

    2016-01-01

    Full Text Available This article describes the working principle of the marine beacon crane hanging disc mechanical anti-sway device, and establish mathematical model on the rope controlling hanging disc of mechanical anti-sway device; Through matlab simulation analysis, this article obtains the relation curve between the velocity of traction rope of hanging disc and output frequency of the crane motor, combining rotary crane scaled model, this article carries out anti-sway experiment for the rotary crane to examine the crane’s anti-sway effects.

  15. Analysis of Fukushima unit 2 accident considering the operating conditions of RCIC system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Il, E-mail: sikim@kaeri.re.kr; Park, Jong Hwa; Ha, Kwang Soon; Cho, Song-Won; Song, JinHo

    2016-03-15

    Highlights: • Fukushima unit 2 accident was analyzed using MELCOR 1.8.6. • RCIC operating conditions were assumed and best case was selected. • Effect of RCIC operating condition on accident scenario was found. - Abstract: A severe accident in Fukushima occurred on March 11, 2011 and units 1, 2 and 3 were damaged severely. A tsunami following an earthquake made the supply of electricity power stop, and the safety systems, which use AC or DC power in plants could not operate properly. It is supposed that the degree of core degradation of unit 2 is less serious than in the other plants, and it was estimated that the operation of reactor core isolation cooling (RCIC) system at the initial stage of the accident minimized the core damage through decay heat removal. Although the operating conditions of the RCIC system are not known clearly, it can be important to analyze the accident scenario of unit 2. In this study, best case of the Fukushima unit 2 accident was presented considering the operating conditions of the RCIC system. The effects of operating condition on core degradation and fission product release rate to environment were also examined. In addition, importance of torus room flooding level in the accident analysis was discussed. MELCOR 1.8.6 was used in this research, and the geometries of plant and operating conditions of safety system were obtained from TEPCO through OECD/NEA BSAF Project.

  16. Multi-unit Operations in Non-Nuclear Systems: Lessons Learned for Small Modular Reactors

    Energy Technology Data Exchange (ETDEWEB)

    OHara J. M.; Higgins, J.; DAgostino, A.

    2012-01-17

    The nuclear-power community has reached the stage of proposing advanced reactor designs to support power generation for decades to come. Small modular reactors (SMRs) are one approach to meet these energy needs. While the power output of individual reactor modules is relatively small, they can be grouped to produce reactor sites with different outputs. Also, they can be designed to generate hydrogen, or to process heat. Many characteristics of SMRs are quite different from those of current plants and may be operated quite differently. One difference is that multiple units may be operated by a single crew (or a single operator) from one control room. The U.S. Nuclear Regulatory Commission (NRC) is examining the human factors engineering (HFE) aspects of SMRs to support licensing reviews. While we reviewed information on SMR designs to obtain information, the designs are not completed and all of the design and operational information is not yet available. Nor is there information on multi-unit operations as envisioned for SMRs available in operating experience. Thus, to gain a better understanding of multi-unit operations we sought the lesson learned from non-nuclear systems that have experience in multi-unit operations, specifically refineries, unmanned aerial vehicles and tele-intensive care units. In this paper we report the lessons learned from these systems and the implications for SMRs.

  17. Routine Operation of the Envirodish Unit at the Engineering School of the University of Seville

    Energy Technology Data Exchange (ETDEWEB)

    Silva Perez, M. A.; Ruiz Hernandez, V.; Garcia Granados, F. J.; Lillo Bravo, I.

    2006-07-01

    A 10 kWe Parabolic Dish Stirling engine system was installed at the Seville Engineering School in early 2004. This system is one of the Country Reference Units of the EnviroDish project, consisting in the installation and operation of several such units, based on the EuroDish system, in different countries aimed to gathering reliable O and M data that help to improve and fine-tune the technology. The Seville Country Reference Unit is connected to the grid under the Special Regime for power generation, which establishes credits to power generation based on renewable energy sources. The Seville Country Reference Unit has been in operation since March 2004, accumulating 1671 operation hours and 7.8 MWh of electricity production until August 2005. This paper summarizes the results of 18 months operation, with emphasis on O and M aspects and lessons learned during this period. (Author)

  18. Technology used to operate the 300-MW power unit topped with a GTE-110 gas turbine

    Science.gov (United States)

    Berezinets, P. A.; Doverman, G. I.

    2010-09-01

    Results obtained from mathematical simulation of operations for starting the 300-MW power unit topped with a GTE-110 gas turbine installed at the GRES-24 district power station of OAO OGK-6 wholesale power-generating company are described. It is shown that operations on speeding up the steam turbine from a cold state to its idle running mode can be carried out solely by using the heat of exhaust gases from the gas turbine unit without supplying fuel to the boiler.

  19. Modification of Elementary Operational Linear Chains in Compositional Control Unit with Code Sharing

    OpenAIRE

    Aleksander, A.; Larysa, A.; Aleksander, N.

    2009-01-01

    The new design method for compositional microprogram control units with code sharing and elementarization of operational linear chains is proposed. The method targets on reduction in the number of LUT-elements in the combinational part of control unit. Some additional control microinstructions containing codes of the classes of pseudoequivalent chains are used for operational linear chains modification. Proposed method is illustrated by an example. Most desirable GSA characteristics for using...

  20. 2005 Annual Operations Report for INTEC Operable Unit 3-13, Group 1, Tank Farm Interim Action

    Energy Technology Data Exchange (ETDEWEB)

    D. Shanklin

    2006-07-19

    This annual operations report describes the requirements followed and activities conducted to inspect, monitor, and maintain the items installed during performance of the Waste Area Group 3, Operable Unit 3-13, Group 1, Tank Farm Interim Action, at the Idaho Nuclear Technology and Engineering Center. This report describes inspection and monitoring activities fro the surface-sealed areas within the tank farm, concrete-lined ditches and culverts in and around the tank farm, the lift station, and the lined evaporation pond. These activities are intended to assure that the interim action is functioning adequately to meet the objectives stated in the Operable Unit 3-13, Record of Decision for the Group 1, Tank Farm Interim Action, (DOE/ID-10660) and as amended by the agreement to resolve dispute, which was effective in February 2003.

  1. 2005 Annual Operations Report for INTEC Operable Unit 3-13, Group 1, Tank Farm Interim Action

    Energy Technology Data Exchange (ETDEWEB)

    D. Shanklin

    2006-07-19

    This annual operations report describes the requirements followed and activities conducted to inspect, monitor, and maintain the items installed during performance of the Waste Area Group 3, Operable Unit 3-13, Group 1, Tank Farm Interim Action, at the Idaho Nuclear Technology and Engineering Center. This report describes inspection and monitoring activities fro the surface-sealed areas within the tank farm, concrete-lined ditches and culverts in and around the tank farm, the lift station, and the lined evaporation pond. These activities are intended to assure that the interim action is functioning adequately to meet the objectives stated in the Operable Unit 3-13, Record of Decision for the Group 1, Tank Farm Interim Action, (DOE/ID-10660) and as amended by the agreement to resolve dispute, which was effective in February 2003.

  2. 76 FR 66051 - Availability of the Fiscal Year 2010 United States Special Operations Command (USSOCOM) Inventory...

    Science.gov (United States)

    2011-10-25

    ... of the Secretary Availability of the Fiscal Year 2010 United States Special Operations Command... 2330a of Title 10 United States Code as amended by the National Defense Authorization Act for Fiscal..., Defense Procurement and Acquisition Policy, Office of Strategic Sourcing (DPAP/SS) will make available to...

  3. 77 FR 38274 - Availability of the Fiscal Year 2011 United States Special Operations Command (USSOCOM) Inventory...

    Science.gov (United States)

    2012-06-27

    ... of the Secretary Availability of the Fiscal Year 2011 United States Special Operations Command... 2330a of Title 10, United States Code as amended by the National Defense Authorization Act for Fiscal... Acquisition Policy, Office of Strategic Sourcing (DPAP/SS) will make available to the public the first...

  4. United States Special Operations Command Strategic Issues for the Long War

    Science.gov (United States)

    2006-03-15

    for USSOCOM’s campaign plan. UNITED STATES SPECIAL OPERATIONS COMMAND STRATEGIC ISSUES FOR THE LONG WAR World order is more fundamental and primordial ... Soup to Nuts: Understanding the Elements of the Strategy The United States is a big, lumbering, pluralistic, affluent, liberal, democratic

  5. Design and Develop Online Monitoring and Early-warning System of Crane Structural Stress

    Institute of Scientific and Technical Information of China (English)

    XU Huping; LIN Weiguo; XU Changsheng

    2006-01-01

    This paper proposed an online monitoring and early-warning system of dynamic stress of crane metal structure, and designed this system's hardware, including sensor unit, data gathering unit, and controlling & processing unit of this system, and discussed the waterproof protection for resistance strain wafer and scheme of data gathering and transmission of dynamic strain gauge, moreover developed system software of real-time and online monitoring dynamic stress, including data gathering by DLL and data display & processing based on Visual C++. The system applies the dynamic strain gauge to gather the data of the stress, and communicates between PLC control system of crane and upper industrial computer, so that realize the real-time online monitoring and early-warning for crane's metal structure stress. The test results show this system carry on real time and online monitoring to dynamic stress of load-bearing metal structure longly and stability, and can give an alarm and overload protection on time. So the system has good practice value.

  6. Effect of RCIC Operating Conditions on the Accident Scenario in Fukushima Unit 2

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Il; Park, Jong Hwa; Ha, Kwang Soon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    This study was conducted by using MELCOR 1.8.6. Fukushima unit 2 accident was analyzed using MELCOR in this study, and best estimate scenario with considering RCIC operating conditions was presented. Researches on the boiling water reactor (BWR) plant with reactor core isolation cooling (RCIC) system have been conducted. Research on the RCIC operation in Fukushima unit 2 was also conducted by Sandia National Laboratory. MELCOR analysis of the Fukushima unit 2 accident was conducted in the report and energy balance in wetwell was described by considering RCIC operation. However, the effect of RCIC operation condition on the accident scenario has not been studied. The operating conditions of RCIC system affect the pressures in wetwell and drywell, and the high pressure can make leakage path of fission product from PCV to reactor building. Thus it can be directly related with the amount of fission product which released to environment. In this study, severe accident on Fukushima unit 2 was analyzed considering the operating condition of RCIC system, and best estimated scenario was presented. In addition, the effect of RCIC turbine efficiency on the accident progression was examined. Energy balance in suppression chamber was also considered with discussion on the effect of torus room flooding level. It was found that the operating condition of RCIC turbine not only affects the variation of drywell pressure but also the amount of released fission products to environment. It was also confirmed that the RCIC turbine efficiency in the accident would be less than normal operating condition.

  7. Feasibility study report for the 200-BP-1 operable unit. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    This feasibility study (FS) examines a range of alternatives and provides recommendations for selecting a preferred altemative for remediating contamination at the 200-BP-1 operable unit. The 200-BP-1 operable unit is located in the center of the Hanford Site along the northern boundary of the 200 East Area. The 241-BY Tank Farm is located immediately to the south of the operable unit. 200-BP-1 is a source operable unit with contaminated soils associated primarily with nine inactive cribs (known as the 216-B cribs). These cribs were used for disposal of low-level radioactive liquid waste from U Plant uranium recovery operations, and waste storage tank condensate from the adjacent 241-BY Tank Farm. The cribs used for disposal of U Plant waste were in operation from 1955--1965, and the cribs used for disposal of tank condensate were in operation from 1965-1975. In addition to the cribs, four unplanned releases of radioactive materials have occurred within the operable unit. Contaminated surface soils associated with the unplanned releases have been consolidated over the cribs and covered with clean soil to reduce contaminant migration and exposure. Discharge of wastes to the cribs has resulted in soil and groundwater contamination. The groundwater is being addressed as part of the 200 East Aggregate Area groundwater operable unit. Contaminated soils at the site can be categorized by the types of contaminants, their distribution in the soil column, and the risk posed by the various potential exposure pathways. Below the clean soil cover, the near surface soils contain low-:levels of contamination with cesium-137, radium-226, strontium-90, thorium-228 and uranium. The lifetime incremental cancer risk associated with these soils if they were exposed at the surface is 9 {times} 10{sup 5}.

  8. Development and Use of a Web Site with Multimedia Contents as a Complement to Traditional Unit Operations Courses

    Science.gov (United States)

    Tapia, Cristian; Muller, Mauricio; Sapag-Hagar, Jaime; Valenzuela, Fernando; Basualto, Carlos; Abugoch, Lilian

    2005-01-01

    The Unit Operations Laboratory offers 2 courses in unit operations. One is a 2-semester course for chemistry and food engineering students that is more demanding because it considers more unit operations and places more emphasis on solving exercises. The other is a 1-semester course for chemistry and pharmacy students that considers fewer unit…

  9. Results of toxicity tests and chemical analyses conducted on sediments collected from the TNX Outfall Delta Operable Unit, July 1999

    Energy Technology Data Exchange (ETDEWEB)

    Specht, W.L.

    2000-02-11

    In order to provide unit specific toxicity data that will be used to address critical uncertainty in the ecological risk assessment (ERA) for the TNX Outfall Delta Operable Unit (TNXOD OU), sediments were collected from eight locations in the Inner Swamp portion of the operable unit and two unit specific background locations. These samples were analyzed for total mercury, total uranium, and sediment toxicity.

  10. United States Department of Energy, Nevada Operations Office, completion report Operation KLAXON, Fiscal Year 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    The U.S. Department of Energy, Nevada Operations Office (DOE/NV), Completion Report provides a summary of activities conducted at the Nevada Test Site (NTS) between October 1, 1992, and September 30, 1993, associated with Operation KLAXON. (In the past, each annual Completion Report dealt with a series of underground nuclear detonations; however, because no nuclear tests were conducted during FY 1993, this Report summarizes continuing nonnuclear and nuclear test readiness activities at the NTS sponsored by DOE/NV.) The report serves as a reference for those involved with the planning and execution of Operation KLAXON and also serves as a planning guide for future operations. Information in the report covers the logistics and management of activities. Scientific information and data associated with NTS activities are presented in technical documents published by participating agencies. In September 1992, Congress legislated a nine-month moratorium on the testing of nuclear weapons. The bill also provided for a resumption of testing (with no more than five tests per year, or a total of 15 during the next three years) in July 1993, and mandated an end to nuclear testing, entirely, by 1996. President Bush signed the bill into law in October 1992.

  11. Rhipidia crane flies (Diptera: Limoniidae) from Korea.

    Science.gov (United States)

    Podenas, Sigitas; Byun, Hye-Woo; Kim, Sam-Kyu

    2016-07-07

    Korean species of the crane fly genus Rhipidia Meigen, 1818 (Diptera: Limoniidae), are taxonomically revised. Rhipidia (Rhipidia) serena, new species, is described and figured. Rhipidia (R.) longa Zhang, Li, Yang, 2014, R. (R.) maculata Meigen, 1818 and R. (R.) sejuga Zhang, Li, Yang, 2014 are recorded for the first time in Korea. Previously known species, Rhipidia (R.) septentrionis Alexander, 1913 is redescribed and illustrated. Identification key for all Korean Rhipidia species is given. Most antennae, wings, male and female terminalia of all species are illustrated for the first time.

  12. Gregory Crane e i cittadini della repubblica delle lettere

    Directory of Open Access Journals (Sweden)

    Maria Chiara Pievatolo

    2012-05-01

    Full Text Available Chi studia l’antichità conosce Gregory Crane anche quando non ne rammenta il nome, non per quello che ha scritto ma per quello che ha reso possibile scrivere. Crane è il direttore del Perseus Project, una biblioteca digitale che libera gli studiosi dal microcosmo chiuso e inaccessibile della monografia accademica, permettendo loro di lavorare sui classici [...

  13. The Tower Crane Demolition under Special Working Condition%特殊工况下的塔吊拆除

    Institute of Scientific and Technical Information of China (English)

    陈勇

    2013-01-01

    This paper taking the tower crane instal ed in a to-wer of the main tower column of Hangzhou Bay Bridge south waterway bridge as the goal, introduces the demolishing sche-me and operation method of tower crane in special working c-ondition.%  本文以杭州湾跨海大桥南航道桥主塔中塔柱上安装的塔吊为目标,介绍在特殊工况下塔吊的拆除方案及实际操作方法。

  14. Whooping crane titers to eastern equine encephalitis vaccinations

    Science.gov (United States)

    Olsen, G.H.; Kolski, E.; Hatfield, J.S.; Docherty, D.E.; Chavez-Ramirez, Felipe

    2005-01-01

    In 1984 an epizootic of eastern equine encephalitis (EEE) virus killed 7 of 39 (18%) whooping cranes in captivity at the Patuxent Wildlife Research Center in Laurel, Maryland, USA. Since that time whooping cranes have been vaccinated with a human EEE vaccine. This vaccine was unavailable for several years, necessitating use of an equine vaccine in the cranes. This study compared the antibody titers measured for three years using the human vaccine with those measured for two years using the equine form. Whooping cranes developed similarly elevated titers in one year using the human vaccine and both years using the equine vaccine. However, in two years where the human vaccine was used, the whooping cranes developed significantly lower titers compared to other years.

  15. The Applied Meteorology Unit: Nineteen Years Successfully Transitioning Research Into Operations for America's Space Program

    Science.gov (United States)

    Madura, John T.; Bauman, William H., III; Merceret, Francis J.; Roeder, William P.; Brody, Frank C.; Hagemeyer, Bartlett C.

    2011-01-01

    The Applied Meteorology Unit (AMU) provides technology development and transition services to improve operational weather support to America's space program . The AMU was founded in 1991 and operates under a triagency Memorandum of Understanding (MOU) between the National Aeronautics and Space Administration (NASA), the United States Air Force (USAF) and the National Weather Service (NWS) (Ernst and Merceret, 1995). It is colocated with the 45th Weather Squadron (45WS) at Cape Canaveral Air Force Station (CCAFS) and funded by the Space Shuttle Program . Its primary customers are the 45WS, the Spaceflight Meteorology Group (SMG) operated for NASA by the NWS at the Johnson Space Center (JSC) in Houston, TX, and the NWS forecast office in Melbourne, FL (MLB). The gap between research and operations is well known. All too frequently, the process of transitioning research to operations fails for various reasons. The mission of the AMU is in essence to bridge this gap for America's space program.

  16. Man-hour Estimation Model based on Standard Operation Unit for Flexible Manufacturing System

    Directory of Open Access Journals (Sweden)

    Ye Zhenggeng

    2017-01-01

    Full Text Available In flexible manufacturing system, the estimation of man-hour is a difficult problem because of its production-diversity. To explore a more effective method, this paper tried to estimate man-hour from the perspective of operation`s character by establishing standard operation unit (SOU in this paper. A method of parameterizing the SOU is proposed, and a new man-hour estimation model is established on the basis of SOU. At last, this paper verified the effectiveness of this method by the operation of large-scale welding parts.

  17. Development of in-situ product removal strategies in biocatalysis applying scaled-down unit operations

    DEFF Research Database (Denmark)

    Heintz, Søren; Börner, Tim; Ringborg, Rolf Hoffmeyer

    2017-01-01

    An experimental platform based on scaled-down unit operations combined in a plug-and-play manner enables easy and highly flexible testing of advanced biocatalytic process options such as in-situ product removal (ISPR) process strategies. In such a platform it is possible to compartmentalize...... different process steps while operating it as a combined system, giving the possibility to test and characterize the performance of novel process concepts and biocatalysts with minimal influence of inhibitory products. Here the capabilities of performing process development by applying scaled-down unit......-automatically characterize ω-transaminases in a scaled-down packed-bed reactor (PBR) module, showing MPPA as a strong inhibitor. To overcome the inhibition, a two-step liquid-liquid extraction (LLE) ISPR concept was tested using scaled-down unit operations combined in a plug-and-play manner. Through the tested ISPR concept...

  18. Operable Unit 3-13, Group 3, Other Surface Soils (Phase I) Remedial Action Report

    Energy Technology Data Exchange (ETDEWEB)

    L. Davison

    2007-07-31

    This Remedial Action Report summarizes activities undertaken to remediate the Operable Unit 3-13, Group 3, Other Surface Soils, Phase I sites at the Idaho Nuclear Technology and Engineering Center at the Idaho National Laboratory Site. The 10 sites addressed in this report were defined in the Operable Unit 3-13 Record of Decision and subsequent implementing documents. This report concludes that remediation requirements and cleanup goals established for these 10 sites have been accomplished and are hereafter considered No Action or No Further Action sites.

  19. Qualitative risk assessment for the 100-KR-4 groundwater operable unit

    Energy Technology Data Exchange (ETDEWEB)

    Biggerstaff, R.L.

    1994-06-30

    This report provides the qualitative risk assessment (QRA) for the 100-KR-4 groundwater operable unit at the US Department of Energy`s (DOE) Hanford Site in southeastern Washington State. The extent of the groundwater beneath the 100 K Area is defined in the Remedial Investigation/Feasibility Study Work Plan for the 100-KR-4 Operable Unit (DOE-RL 1992a). The QRA is an evaluation or risk using a limited amount of data and a predefined set of human and environmental exposure scenarios and is not intended to replace or be a substitute for a baseline risk assessment.

  20. Operable Unit 3-13, Group 7, SFE-20 Hot Waste Tank System Remedial Action Request

    Energy Technology Data Exchange (ETDEWEB)

    L. Davison

    2009-06-30

    This Remedial Action Report summarizes activities undertaken to remediate the Operable Unit 3-13, Group 7, SFE-20 Hot Waste Tank System at the Idaho Nuclear Technology and Engineering Center at the Idaho National Laboratory Site. The site addressed in this report was defined in the Operable Unit 3-13 Record of Decision and subsequent implementing documents. This report concludes that remediation requirements and cleanup goals established for the site have been accomplished and is hereafter considered a No Further Action site.

  1. Operable Unit 3-13, Group 7, SFE-20 Hot Waste Tank System Remedial Action Report

    Energy Technology Data Exchange (ETDEWEB)

    Lee Davison

    2009-06-30

    This Remedial Action Report summarizes activities undertaken to remediate the Operable Unit 3-13, Group 7, SFE-20 Hot Waste Tank System at the Idaho Nuclear Technology and Engineering Center at the Idaho National Laboratory Site. The site addressed in this report was defined in the Operable Unit 3-13 Record of Decision and subsequent implementing documents. This report concludes that remediation requirements and cleanup goals established for the site have been accomplished and is hereafter considered a No Further Action site.

  2. Phase 1 remedial investigation report for 200-BP-1 operable unit. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The US Department of Energy (DOE) Hanford Site, in Washington State is organized into numerically designated operational areas including the 100, 200, 300, 400, 600, and 1100 Areas. The US Environmental Protection Agency (EPA), in November 1989 included the 200 Areas of the Hanford Site on the National Priority List (NPL) under the Comprehensive Environmental Response, Compensation and Liability Act of 1980 (CERCLA). Inclusion on the NPL initiated the remedial investigation (RD process for the 200-BP-1 operable unit. These efforts are being addressed through the Hanford Federal Facility Agreement and Consent Order (Ecology et al. 1989) which was negotiated and approved by the DOE, the EPA, and the State of Washington Department of Ecology (Ecology) in May 1989. This agreement, known as the Tri-Party Agreement, governs all CERCLA efforts at Hanford. In March of 1990, the Department of Energy, Richland Operations (DOE-RL) issued a Remedial Investigation/Feasibility Study (RI/FS) work plan (DOE-RL 1990a) for the 200-BP-1 operable unit. The work plan initiated the first phase of site characterization activities associated with the 200-BP-1 operable unit. The purpose of the 200-BP-1 operable unit RI is to gather and develop the necessary information to adequately understand the risks to human health and the environment posed by the site and to support the development and analysis of remedial alternatives during the FS. The RI analysis will, in turn, be used by Tri-Party Agreement signatories to make a risk-management-based selection of remedies for the releases of hazardous substances that have occurred from the 200-BP-1 operable unit.

  3. Integrated Berth Allocation-Quay Crane Assignment Problem: Reformulations, Improved Constraints and Computational Results

    DEFF Research Database (Denmark)

    Iris, Cagatay; Røpke, Stefan; Pacino, Dario

    a number of operational costs, such as the tardiness of the schedule, vessel speedup cost, and crane operation cost. The contribution of this work is twofold. First, we improve the model presented in [1] by proposing a number of valid inequalities. Second, we introduce a novel set partitioning formulation...... since start-time variables S_i are integrated into objective function. Inequality (1) is based on the following two observations. First, if vessel i berths before vessel j (X_ij=1), then the start time of vessel j (Sj) should be larger than the start time of vessel i plus its minimum expected processing...... dependent costs (D_p) and the crane assignment costs (C_p). Constraints ensure that each vessel is assigned to one plan, that at a given time t and position s at most one plan can be selected, and that at most one crane amount can be selected in a given plan with the knapsack constraint ∑_(p∈ω)▒〖D_p^t λ...

  4. Structural characterization and condition for measurement statistics preservation of a unital quantum operation

    Science.gov (United States)

    Lee, Kai-Yan; Fung, Chi-Hang Fred; Chau, H. F.

    2013-05-01

    We investigate the necessary and sufficient condition for a convex cone of positive semidefinite operators to be fixed by a unital quantum operation ϕ acting on finite-dimensional quantum states. By reducing this problem to the problem of simultaneous diagonalization of the Kraus operators associated with ϕ, we can completely characterize the kinds of quantum states that are fixed by ϕ. Our work has several applications. It gives a simple proof of the structural characterization of a unital quantum operation that acts on finite-dimensional quantum states—a result not explicitly mentioned in earlier studies. It also provides a necessary and sufficient condition for determining what kind of measurement statistics is preserved by a unital quantum operation. Finally, our result clarifies and extends the work of Størmer by giving a proof of a reduction theorem on the unassisted and entanglement-assisted classical capacities, coherent information, and minimal output Renyi entropy of a unital channel acting on a finite-dimensional quantum state.

  5. 76 FR 66617 - Airworthiness Directives; Erickson Air-Crane Incorporated Model S-64F Helicopters

    Science.gov (United States)

    2011-10-27

    ...-026-AD; Amendment 39-16835; AD 2011-21-12] RIN 2120-AA64 Airworthiness Directives; Erickson Air-Crane.... SUMMARY: We are adopting a new airworthiness directive (AD) for the Erickson Air-Crane (Erickson Air-Crane..., 2011. ADDRESSES: For service information identified in this AD, contact Erickson Air-Crane Incorporated...

  6. NUMATH: a nuclear-material-holdup estimator for unit operations and chemical processes

    Energy Technology Data Exchange (ETDEWEB)

    Krichinsky, A.M.

    1983-02-01

    A computer program, NUMATH (Nuclear Material Holdup Estimator), has been developed to estimate compositions of materials in vessels involved in unit operations and chemical processes. This program has been implemented in a remotely operated nuclear fuel processing plant. NUMATH provides estimates of the steady-state composition of materials residing in process vessels until representative samples can be obtained and chemical analyses can be performed. Since these compositions are used for inventory estimations, the results are determined for the cataloged in container-oriented files. The estimated compositions represent materials collected in applicable vessels - including consideration for materials previously acknowledged in these vessels. The program utilizes process measurements and simple performance models to estimate material holdup and distribution within unit operations. In simulated run-testing, NUMATH typically produced estimates within 5% of the measured inventories for uranium and within 8% of the measured inventories for thorium during steady-state process operation.

  7. Liquid phase methanol LaPorte process development unit: Modification, operation, and support studies

    Energy Technology Data Exchange (ETDEWEB)

    1991-02-02

    The primary focus of this Process Development Unit operating program was to prepare for a confident move to the next scale of operation with a simplified and optimized process. The main purpose of these runs was the evaluation of the alternate commercial catalyst (F21/0E75-43) that had been identified in the laboratory under a different subtask of the program. If the catalyst proved superior to the previous catalyst, then the evaluation run would be continued into a 120-day life run. Also, minor changes were made to the Process Development Unit system to improve operations and reliability. The damaged reactor demister from a previous run was replaced, and a new demister was installed in the intermediate V/L separator. The internal heat exchanger was equipped with an expansion loop to relieve thermal stresses so operation at higher catalyst loadings and gas velocities would be possible. These aggressive conditions are important for improving process economics. (VC)

  8. Tracking sandhill crane migration from Saskatchewan to the Gulf Coast

    Science.gov (United States)

    Hjertaas, D.G.; Ellis, D.H.; Johns, B.W.; Moon, S.L.

    2001-01-01

    Four adult sandhill cranes (Grus canadensis rowani) were captured in east-central Saskatchewan, equipped with transmitters, and tracked by satellite to determine if their migration routes and wintering areas would allow their use as guide birds to establish a new migratory flock of whooping cranes (G. americana). Two birds captured near Yorkton died or their transmitters were lost before migration. Two adults from the Overflowing River moved to staging areas in southern Saskatchewan in September. By 29 September, Crane A left Saskatchewan and moved to North Dakota where it remained until late October. By 21 December, it arrived a few km inland from the Gulf Coast near McFaddin, Texas, 3,378 km from its capture location. It remained there until at least 9 March 1995. On 15 March, it was relocated near Grand Island, Nebraska and by 20 April, it had returned to the Overflowing River area. Crane B spent most of September and October near the Quill Lakes, Saskatchewan, then migrated with brief stops in South Dakota and Kansas, arriving 29 November at its winter area near the northwestern comer of the Laguna Madre in Tamaulipas, Mexico, 3,998 km from its summering area. It remained there until at least 25 December, whereafter no further transmissions were received. Because both cranes wintered or migrated near the current whooping crane winter area at Aransas National Wildlife Refuge (Aransas), Texas, this population was judged unsuitable to provide guide birds for a new flock of whooping cranes.

  9. Vitamin E in cranes: reference ranges and nutrient interactions

    Science.gov (United States)

    Dierenfeld, Ellen S.; Sheppard, C.D.; Langenberg, J.; Mirande, C.; Spratt, J.; Dein, F.J.

    1993-01-01

    Fat soluble vitamins E and A (quantified as alpha-tocopherol and all-trans retinol, respectively) were measured in plasma samples from 274 captive cranes from four institutions and five free-ranging birds. Ages ranged from 4 mo to 80 yr, and all 15 crane species were represented. Captive cranes had a mean +/- standard error (SE) of 6.57 +/- 0.82 micrograms/ml alpha-tocopherol; migrating greater sandhill cranes (Grus canadenis tabida) had a plasma concentration of 3.71 +/- 0.22 micrograms/ml. Sex and age differences were not significant, but crane species that evolved in temperate habitats had higher circulating levels of alpha-tocopherol than tropical or subtropical species. Mean +/- SE retinol values were 0.69 +/- 0.05 micrograms/ml in captive cranes, and 0.66 +/- 0.08 micrograms/ml in free-ranging cranes; values did not differ significantly by sex, age, or species. Dietary vitamin E concentrations were significantly correlated with plasma alpha-tocopherol levels in a logarithmic relationship. Dietary selenium at 0.5 mg/kg was associated with decreased circulating alpha-tocopherol concentrations.

  10. Toeplitz Operators on the Weighted Bergman Space over the Two-Dimensional Unit Ball

    Directory of Open Access Journals (Sweden)

    Alma García

    2015-01-01

    Full Text Available We extend the known results on commutative Banach algebras generated by Toeplitz operators with radial quasi-homogeneous symbols on the two-dimensional unit ball. Spherical coordinates previously used hid a possibility to detect an essentially wider class of symbols that can generate commutative Banach Toeplitz operator algebras. We characterize these new algebras describing their properties and, under a certain extra condition, construct the corresponding Gelfand theory.

  11. Analysis of United States Marine Corps Operations in Support of Humanitarian Assistance and Disaster Relief

    Science.gov (United States)

    2013-12-01

    unit (MEU), Bangladesh Cyclone Sidr, Operation Sea Angel II, Haiti earthquake 2010, Operation Unified Response, Great East Japan earthquake and...with respect to the conduct of HA/DR missions. We have collected data for the 2007 cyclone on the southwest coast of Bangladesh, the 2010 Haiti ...responded to the 2007 cyclone in Bangladesh, the 2010 Haiti earthquake, and the 2011 Japanese earthquake and subsequent tsunami, respectively. These

  12. Mortality on grower/finisher-only swine operations in the United States

    Directory of Open Access Journals (Sweden)

    Losinger W.C.

    1999-01-01

    Full Text Available For 53 grower/finisher-only swine operations that participated in the United States National Animal Health Monitoring System 1995 National Swine Study, mortality among finisher pigs ranged from 0 to 12.0% over a 6-month period. Twenty-six (49.1% had 2% mortality. Nine (17.0% operations experienced >4% mortality. Fisher's exact test revealed that operations with all-in all-out management were significantly more likely to have 1 grower/finisher pig came from another source. Larger operations (where >900 pigs entered the grower/finisher phase practiced all-in, all-out management more frequently than smaller operations, and had a lower mean percent mortality than smaller operations. Diagnosis of Salmonella in finisher pigs performed at a laboratory or by a veterinarian in the 12 months prior to interview was associated with both increased percent mortality and increased percent mortality per day.

  13. HARDENING OF CRANE RAILS BY PLASMA DISCRETE-TIME SURFACE TREATMENT

    Directory of Open Access Journals (Sweden)

    S. S. Samotugin

    2017-01-01

    Full Text Available Crane wheels and rails are subjected to intensive wear in the process of operation. Therefore, improvement of these components’ performance can be considered a task of high importance. A promising direction in this regard is surface treatment by highly concentrated energy flows such as laser beams or plasma jets. This thesis suggests that the use of gradient plasma surface treatment can improve the performance of crane rails. A research was conducted, according to which hardened zones were deposited on crane rails under different treatment modes. Microhardness was measured both at the surface and in depth using custom-made microsections. The article includes the results of study of plasma surface hardening effects on wear resistance of crane rails. Change of plasma surface treatment parameters (current, plasma torch movement speed, argon gas flow rate allows for desired steel hardness and structure, while the choice of optimal location for hardened zones makes it possible to significantly improve wear resistance and crack resistance. As a result of plasma surface hardening, the fine-grained martensite structure is obtained with mainly lamellar morphology and higher hardness rate compared toinduction hardening or overlaying. Wear test of carbon steels revealed that plasma surfacing reduces abrasive wear rate compared to the irinitial state by 2 to 3 times. Enough sharp boundary between hardened and non-hardened portions has a positive effect on the performance of parts under dynamic loads, contributing to the inhibition of cracks during the transition from solid to a soft metal. For carbon and low alloy rail steels, the properties achieved by plasma surface hardening can effectively replace induction hardening or overlaying.The mode range for plasma surface treatment that allow sobtaining a surface layer with certain operating properties has been determined.

  14. Design of optimal operating conditions of simulated moving bed adsorptive separation units

    Energy Technology Data Exchange (ETDEWEB)

    Storti, G. (Univ. degli Studi di Padova (Italy)); Baciocchi, R.; Mazzotti, M.; Morbidelli, M. (Politecnico di Milano (Italy). Dipt. di Chimica Fisica Applicata)

    1995-01-01

    The design of the optimal operating conditions for simulated moving bed (SMB) adsorptive separation units is considered. A procedure for the a priori selection of the operating conditions to achieve an assigned separation requirement is developed in the frame of equilibrium theory for the equivalent four section countercurrent unit, using a model where the adsorption equilibria are described through the constant selectivity stoichiometric model, while both mass transfer resistance and axial dispersion are neglected. The space of the operating parameters, i.e. the mass flow rate ratios m[sub j], is divided in regions with different separation regimes. Curves at constant outlets purity and recovery are drawn in the (m[sub 2],m[sub 3]) plane. The introduction of three performance parameters, desorbent requirement, adsorbent requirement, and productivity, allows the development of a procedure for the design of optimal operating conditions. This procedure is completed, accounting for the effect of the switching time on the separation performances, with a detailed model of the SMB unit, considering both axial dispersion and mass transfer resistance. This result constitutes a useful tool for determining the range of operating conditions to achieve an assigned separation requirement and then for selecting the optimal operating condition within this range.

  15. 40 CFR 62.15145 - What are the operating practice requirements for my municipal waste combustion unit?

    Science.gov (United States)

    2010-07-01

    ... requirements for my municipal waste combustion unit? 62.15145 Section 62.15145 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Good Combustion Practices: Operating Requirements § 62.15145 What are the operating practice requirements for my municipal waste combustion unit? (a) You...

  16. Normal and clinical haematology of captive cranes (Gruiformes).

    Science.gov (United States)

    Hawkey, C; Samour, J H; Ashton, D G; Hart, M G; Cindery, R N; Ffinch, J M; Jones, D M

    1983-01-01

    Fall blood counts on 56 clinically normal cranes of nine different species have provided reference values for the interpretation of haematological changes in 13 cranes presenting with abnormal clinical signs. Hypochromic anaemia, heterophilia and lymphocytosis were found in birds with probable Mycobacterium avium infection and heterophilia and lymphocytosis in birds with bumblefoot, arthritis, nephrosis and cardiac myopathy. In several of the cases with heterophilia and lymphocytosis the fibrinogen level was also raised. A senile bird with thickened heart valves showed macrocytosis. The potential diagnostic value of clinical haematology in cranes is discussed.

  17. Host–parasite behavioral interactions in a recently introduced, whooping crane population

    Science.gov (United States)

    King, Richard S.; McKann, Patrick C.; Gray, Brian R.; Putnam, Michael S.

    2015-01-01

    The whooping crane Grus americana has a long conservation history, but despite multiple attempts across North America, introduction success is lacking. Recently introduced, captively reared whooping cranes have had periods of poor reproductive performance in central Wisconsin that sometimes coincided with black fly (Diptera: Simuliidae) emergences. Sandhill crane Grus canadensis reproductive performance in central Wisconsin is approximately double that of whooping cranes. We used comfort behaviors as a measure of black fly harassment to infer whether behavioral differences existed between nesting sandhill cranes and nesting whooping cranes and between successful and unsuccessful whooping crane pairs. To further explore the interaction between black flies and incubating whooping cranes, we examined differences in behaviors between incubating birds and their off-nest mates. Compared to their off-nest mates, incubating whooping cranes exhibited elevated comfort behaviors, suggesting a bird at a nest may experience greater harassment from black flies. Sandhill cranes had elevated head-flicks over whooping cranes. Whooping cranes exhibited more head-rubs than sandhill cranes, and successful whooping crane pairs had elevated head-rubs over pairs that deserted their nests. Behavioral differences between sandhill cranes and whooping cranes as well as differences in reproductive performance, could be explained by exposure to local breeding conditions. Whereas sandhill cranes have nested in the area for hundreds, if not thousands, of years, whooping cranes were only recently introduced to the area. Behavioral differences between the species as well as those between successful and unsuccessful whooping crane pairs could also be explained by the effect of captive exposure, which could affect all whooping crane introductions.

  18. Clinical pathology results from cranes with experimental West Nile Virus infection

    Science.gov (United States)

    Olsen, Glenn H.

    2011-01-01

    Sandhill cranes (Grus canadensis) were vaccinated for and then challenged with West Nile virus. Resulting titers demonstrated protection in the vaccinated-challenged cranes as compared to the unvaccinated-challenged cranes. Clinical pathology results showed challenged cranes, whether vaccinated or not, had a decrease in their hematocrits and an elevation of 2.5-fold in their white blood cell counts as compared to unchallenged control sandhill cranes. No differences were apparent in the differential counts of heterophils and lymphocytes.

  19. Orchard Business Management. Unit II. Management and Analysis of the Orchard Operation.

    Science.gov (United States)

    Mullinix, Shauna K.

    This guide is intended for use in providing in-depth formal classroom and on-site instruction in the principles of business and financial management as they apply to operating and managing orchards. Designed to be used with an accompanying Orchard Business Management Record Book, this unit is devoted to management and analysis of an orchard…

  20. Hydrologic resources management program and underground test area operable unit fy 1997

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D. F., LLNL

    1998-05-01

    This report present the results of FY 1997 technical studies conducted by the Lawrence Livermore National Laboratory (LLNL) as part of the Hydrology and Radionuclide Migration Program (HRMP) and Underground Test Area Operable Unit (UGTA). The HRMP is sponsored by the US Department of Energy to assess the environmental (radiochemical and hydrologic) consequences of underground nuclear weapons testing at the Nevada Test Site.

  1. China's first large-scale MA production unit operational in Shanxi

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Abrainchild of researchers of the CAS Institute of Coal Chemistry, a production unit capable of turning out 20,000 tons of maleic anhydride (MA) per year, the largest of its kind in China, has come into operation recently at the Shanxi Regent Taiming Chemical Co Ltd in Taiyuan, capital of north China's Shanxi Province.

  2. Predicting performance and situation awareness of robot operators in complex situations by unit task tests

    NARCIS (Netherlands)

    Mioch, T.; Smets, N.J.J.M.; Neerincx, M.A.

    2012-01-01

    Human-in-the-loop field tests of human-robot operations in high-demand situations provide serious constraints with respect to costs and control. A set of relatively simple unit tasks might be used to do part of the testing and to establish a benchmark for human-robot performance and situation awaren

  3. Liquid phase methanol LaPorte process development unit: Modification, operation, and support studies

    Energy Technology Data Exchange (ETDEWEB)

    1991-02-02

    This report consists of Detailed Data Acquisition Sheets for Runs E-6 and E-7 for Task 2.2 of the Modification, Operation, and Support Studies of the Liquid Phase Methanol Laporte Process Development Unit. (Task 2.2: Alternate Catalyst Run E-6 and Catalyst Activity Maintenance Run E-7).

  4. Ambiguity in Units and the Referents: Two Cases in Rational Number Operations

    Science.gov (United States)

    Rathouz, Margaret

    2010-01-01

    I explore the impact of ambiguous referral to the unit on understanding of decimal and fraction operations during episodes in two different mathematics courses for pre-service teachers (PSTs). In one classroom, the instructor introduces a rectangular area diagram to help the PSTs visualize decimal multiplication. A transcript from this classroom…

  5. Orchard Business Management. Unit II. Management and Analysis of the Orchard Operation.

    Science.gov (United States)

    Mullinix, Shauna K.

    This guide is intended for use in providing in-depth formal classroom and on-site instruction in the principles of business and financial management as they apply to operating and managing orchards. Designed to be used with an accompanying Orchard Business Management Record Book, this unit is devoted to management and analysis of an orchard…

  6. Predicting performance and situation awareness of robot operators in complex situations by unit task tests

    NARCIS (Netherlands)

    Mioch, T.; Smets, N.J.J.M.; Neerincx, M.A.

    2012-01-01

    Human-in-the-loop field tests of human-robot operations in high-demand situations provide serious constraints with respect to costs and control. A set of relatively simple unit tasks might be used to do part of the testing and to establish a benchmark for human-robot performance and situation awaren

  7. Use of the LITEE Lorn Manufacturing Case Study in a Senior Chemical Engineering Unit Operations Laboratory

    Science.gov (United States)

    Abraham, Nithin Susan; Abulencia, James Patrick

    2011-01-01

    This study focuses on the effectiveness of incorporating the Laboratory for Innovative Technology and Engineering Education (LITEE) Lorn Manufacturing case into a senior level chemical engineering unit operations course at Manhattan College. The purpose of using the case study is to demonstrate the relevance of ethics to chemical engineering…

  8. 集装箱岸桥安全操作中信息处理建模及分析%Modeling and Analysing Information Processing in Safety Operation of Quayside Container Crane

    Institute of Scientific and Technical Information of China (English)

    潘洋; 梁承姬; 郑惠强

    2013-01-01

    为研究集装箱岸桥(QC)装卸作业安全操作机理,利用信息论的理论和方法对岸桥信息处理与传递进行建模和计算.首先总结集装箱装卸作业流程的11个作业环节,以人脑为信道,利用通信系统模型建立岸桥司机装卸作业各环节的信息传输转换模型.基于甘特图思想,建立整个装卸作业流程的刺激-反应流程图;并计算作为刺激的各信息源事件的信息量I(xi),信源熵H(X)和信息传递量HT.根据描述性模型和定量计算结果,对各作业环节提出有针对性的事故预防措施.%To analyse mechanism of the safety operation of QC,a set of descriptive models based on Information Theory were built and the quantitative calculations were made.According to the 11 stages of QC loading/unloading operation,the feature of loading/unloading was extracted.So a set of models describing information processing of each stage during loading/unloading are presented as human brain being taken like a channel.And in order to quantitatively calculate the information processing,a stimulus-response flow diagram is drawn on the principle of Gantt chart.Then information content I(xi),information entropy H(X) and information transmission HT are calculated on the basis of the theory and method of Information Theory.Finally accidents prevention measures for each stage are proposed according to the descriptive models and the quantitative analysis.

  9. Qualitative risk assessment for the 100-HR-3 groundwater operable unit

    Energy Technology Data Exchange (ETDEWEB)

    Vukelich, S.E. [Golder Associates, Inc., Richland, WA (United States)

    1994-09-22

    This report provides the qualitative risk assessment for the 100-HR-3 operable unit on the Hanford Reservation. 100-HR-3 is a ground water unit. The purpose of the QRA at the 100-HR-3 operable unit is to focus on a predefined set of human and environmental exposure scenarios in order to provides sufficient information that will assist the Tri-Party signatories (Washington State Department of Ecology, EPA and US DOE) in making defensible decisions on the necessity of Interim Remedial Measures. Frequent- and occasional-use exposure scenarios are evaluated in the human health risk assessment to provide bounding estimates of risk. The ecological risk assessment consists of an evaluation of the risks to riparian and aquatic receptors which live in or near the Columbia River.

  10. Annual Summary Report Calendar Year 2000 for the 100-HR-3, 100-KR-4, and 100-NR-2 Operable Units and Pump-and-Treat Operations

    Energy Technology Data Exchange (ETDEWEB)

    G. B. Mitchem

    2001-08-22

    This annual progress and performance evaluation report discusses the groundwater remedial actions in the 100 Area, including the interim actions at the 100-HR-3 and 100-KR-4 Operable Units, and also discusses the expedited response action in the 100-NR-2 operable unit.

  11. Limited field investigation report for the 100-HR-3 operable unit

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This limited field investigation (LFI) was conducted to assess the applicability of interim remedial measures (IRM) for reducing human health and environmental risks within the 100-HR-3 Groundwater Operable Unit. The 100-HR-3 Operable Unit is comprised of three subareas; the 100 D Area, the 100 H Area and those portions of the 600 Area between the two reactor areas. The operable unit is one of seven operable units associated with the 100 D and H Areas. Operable units 100-DR-1, 100-DR-2, 100-DR-3, 100-HR-1, 100-HR-2 and 100-IU-4 address contaminant sources while 100-HR-3 addresses contamination present in the underlying groundwater. The primary method of field investigation used during this LFI was the installation and sampling of monitoring wells. Samples were collected from the groundwater and soils, and submitted for laboratory analysis. Boreholes were surveyed for radiological contamination using downhole geophysical techniques to further delineate the locations and levels of contaminants. All samples were screened to ascertain the presence of volatile organic compounds and radionuclides. Analytical data were subjected to validation; all round one, two and three and a minimum of 10% of round four data associated with the LFI were validated. A screening method was used to identify contaminants of potential concern (COPC). This screening method eliminated from further consideration, constituents that were below background. Constituents which are considered non-toxic to humans were eliminated from the human health evaluation. Data consistency and blank contamination were also evaluated in the screening process. These COPC were then evaluated further in the qualitative risk assessment (QRA). A human health QRA was performed using conservative (maximum equilibrated contaminant levels from the LFI) analyses.

  12. A practical application combining wireless sensor networks and Internet of Things: Safety Management System for Tower Crane Groups.

    Science.gov (United States)

    Zhong, Dexing; Lv, Hongqiang; Han, Jiuqiang; Wei, Quanrui

    2014-07-30

    The so-called Internet of Things (IoT) has attracted increasing attention in the field of computer and information science. In this paper, a specific application of IoT, named Safety Management System for Tower Crane Groups (SMS-TC), is proposed for use in the construction industry field. The operating status of each tower crane was detected by a set of customized sensors, including horizontal and vertical position sensors for the trolley, angle sensors for the jib and load, tilt and wind speed sensors for the tower body. The sensor data is collected and processed by the Tower Crane Safety Terminal Equipment (TC-STE) installed in the driver's operating room. Wireless communication between each TC-STE and the Local Monitoring Terminal (LMT) at the ground worksite were fulfilled through a Zigbee wireless network. LMT can share the status information of the whole group with each TC-STE, while the LMT records the real-time data and reports it to the Remote Supervision Platform (RSP) through General Packet Radio Service (GPRS). Based on the global status data of the whole group, an anti-collision algorithm was executed in each TC-STE to ensure the safety of each tower crane during construction. Remote supervision can be fulfilled using our client software installed on a personal computer (PC) or smartphone. SMS-TC could be considered as a promising practical application that combines a Wireless Sensor Network with the Internet of Things.

  13. Soil washing physical separations test procedure - 300-FF-1 operable unit

    Energy Technology Data Exchange (ETDEWEB)

    Belden, R.D.

    1993-10-08

    This procedure provides the operations approach, a field sampling plan, and laboratory procedures for a soil washing test to be conducted by Alternative Remedial Technologies, Inc. (ART) in the 300-FF-1 area at the Hanford site. The {open_quotes}Quality Assurance Project Plan for the Soil Washing Physical Separations Test, 300-FF-1 Operable Unit,{close_quotes} Hanford, Washington, Alternative Remedial Technologies, Inc., February 1994 (QAPP) is provided in a separate document that presents the procedural and organizational guidelines for this test. This document describes specifications, responsibilities, and general procedures to be followed to conduct physical separation soil treatability tests in the North Process Pond of the 300-FF-1 Operable Unit (OU) at the Hanford Site. These procedures are based on the {open_quotes}300-FF-1 Physical Separations CERCLA Treatability Test Plan, DOE/RL 92-2l,{close_quotes} (DOE-RL 1993).

  14. Remedial investigation/feasibility study work plan for the 100-KR-4 operable unit, Hanford Site, Richland, Washington

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    Four areas of the Hanford Site (the 100, 200, 300, and 1100 Areas) have been included on the US Environmental Protection Agency`s (EPA`s) National Priorities List (NPL) under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). This work plan and the attached supporting project plans establish the operable unit setting and the objectives, procedures, tasks, and schedule for conducting the CERCLA remedial investigation/feasibility study (RI/FS) for the 100-KR-4 operable unit. The 100-K Area consists of the 100-KR-4 groundwater operable unit and three source operable units. The 100-KR-4 operable unit includes all contamination found in the aquifer soils and water beneath the 100-K Area. Source operable units include facilities and unplanned release sites that are potential sources of contamination.

  15. Determination of Oil Life for Crane Liebherr LHM 500g Model 301 by Oil Condition Monitoring

    Directory of Open Access Journals (Sweden)

    Payman Salami

    2010-05-01

    Full Text Available The objective of this research is to choose and investigate the best oil replacement time by oil condition monitoring for crane Liebherr LHM 500G model 301 that works near the sea in marine company. This was achieved by investigating different oil sam ple analyses of crane Liebherr LHM 500G model 301. The oil analysis was initially run under regular interval during machines life. Some series of tests were then conducted under the operating hours of machine. Oil samples were regularly collected. Numerical data produced by oil analysis were compared with another sample, in order to quantify the effectiveness of the results of oil condition monitoring technique. The results from this paper have given more understanding on the dependent and independent roles of oil analysis in predicting which oil is more suitable for working machine condition. According to the results, the oil used in this crane can be used more than 130 h and the best oil running time is 160 h.

  16. Final Critical Habitat for the Whooping crane (Grus americana)

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — To provide the user with a general idea of areas where the final critical habitat for Whooping crane (Grus americana) occur based on the description provided in the...

  17. Final Critical Habitat for the Whooping crane (Grus americana)

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — To provide the user with a general idea of areas where the final critical habitat for Whooping crane (Grus americana) occur based on the description provided in the...

  18. Crane Meadows National Wildlife Refuge: Comprehensive Conservation Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This Comprehensive Conservation Plan (CCP) was written to guide management on Crane Meadows NWR for the next 15 years. This plan outlines the Refuge vision and...

  19. Whooping Crane Eastern Partnership 2002 annual monitoring report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Annual monitoring report on the eastern migratory whooping crane population reintroduced on Necedah National Wildlife Refuge, central Wisconsin. This report is a...

  20. Cooperative whooping crane tracking project : August 1994-January 1995

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for August 1994 through January 1995. Report includes a information on the arrivals and...

  1. Cooperative whooping crane tracking project : September-December 1985

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the fall of 1985. Report includes a information on the arrivals and banding, graph of...

  2. Cooperative whooping crane tracking project : March-May 1985

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the spring of 1985. Report includes a information on the arrivals and banding, graph of...

  3. Cooperative whooping crane tracking project : February-May 1983

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the spring of 1983. Report includes a information on the arrivals and banding, graph of...

  4. Cooperative whooping crane tracking project : September-December 1987

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the fall of 1987. Report includes a information on the arrivals and banding, graph of...

  5. Cooperative whooping crane tracking project : March-June 1989

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the spring of 1989. Report includes a information on the arrivals and banding, graph of...

  6. Cooperative whooping crane tracking project : March-May 1987

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the spring of 1987. Report includes a information on the arrivals and banding, graph of...

  7. Cooperative whooping crane tracking project : April-June 1991

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the spring of 1991. Report includes a information on the arrivals and banding, graph of...

  8. Cooperative whooping crane tracking project : August-December 1990

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the fall of 1990. Report includes a information on the arrivals and banding, graph of...

  9. Cooperative whooping crane tracking project : August 1995-December 1995

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the fall of 1995. Report includes a information on the arrivals and banding, graph of...

  10. Cooperative whooping crane tracking project : April-May, 1976

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to the Fish and Wildlife Enhancement Office for the spring of 1976. Report includes a information on the arrivals,...

  11. Cooperative whooping crane tracking project : March-May 1995

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the spring of 1995. Report includes a information on the arrivals and banding, graph of...

  12. Cooperative whooping crane tracking project : March-May 1988

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the spring of 1988. Report includes a information on the arrivals and banding, graph of...

  13. Cooperative whooping crane tracking project : September-December 1989

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the fall of 1989. Report includes a information on the arrivals and banding, graph of...

  14. Cooperative whooping crane tracking project : April-June 1990

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the spring of 1990. Report includes a information on the arrivals and banding, graph of...

  15. Whooping Crane Winter Abundance Survey Protocol Aransas National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This protocol is primarily designed to provide a mechanism for monitoring trends in whooping crane abundance on their wintering grounds along the Texas gulf coast....

  16. Characterization of Habitat Used by Whooping Cranes During Migration.

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Information is drawn from the literature and the professional opinions of behaviorists and habitat use experts, and used to describe requirements of whooping cranes...

  17. The Trail Inventory of Mississippi Sandhill Crane NWR [Cycle 2

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of this report is to create a baseline inventory of all non-motorized trails on Mississippi Sandhill Crane National Wildlife Refuge. Trails in this...

  18. Whooping Crane Transplant Experiment progress reports and supporting documents : 1988

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This collection of documents support the Whooping Crane transplant experiment on Grays Lake NWR and supporting Refuges including Monte Vista, Cora, Lonetree, Jensen,...

  19. Whooping Crane Transplant Experiment progress reports and supporting documents : 1984

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This collection of documents support the Whooping Crane transplant experiment on Grays Lake NWR and supporting Refuges including Monte Vista, Cora, Lonetree, Jensen,...

  20. Whooping Crane Transplant Experiment progress reports and supporting documents : 1983

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This collection of documents support the Whooping Crane transplant experiment on Grays Lake NWR and supporting Refuges including Monte Vista, Cora, Lonetree, Jensen,...

  1. Whooping Crane Transplant Experiment and Support Documents : 1975

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This collection of documents support the Whooping Crane transplant experiment on Grays Lake NWR and supporting Refuges including Monte Vista NWR. This collection of...

  2. Whooping Crane Transplant Experiment progress reports and supporting documents : 1977

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This collection of documents support the Whooping Crane transplant experiment on Grays Lake NWR and supporting Refuges including Monte Vista, Cora, Lonetree, Jensen,...

  3. Whooping Crane Transplant Experiment progress reports and supporting documents : 1978

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This collection of documents support the Whooping Crane transplant experiment on Grays Lake NWR and supporting Refuges including Monte Vista, Cora, Lonetree, Jensen,...

  4. Whooping Crane Transplant Experiment progress reports and supporting documents : 1982

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This collection of documents support the Whooping Crane transplant experiment on Grays Lake NWR and supporting Refuges including Monte Vista, Cora, Lonetree, Jensen,...

  5. Whooping Crane Transplant Experiment progress reports and supporting documents : 1987

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This collection of documents support the Whooping Crane transplant experiment on Grays Lake NWR and supporting Refuges including Monte Vista, Cora, Lonetree, Jensen,...

  6. Whooping Crane Eastern Partnership 2003 annual monitoring report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Annual monitoring report on the eastern migratory whooping crane population reintroduced on Necedah National Wildlife Refuge, central Wisconsin. This report is a...

  7. Whooping Crane Transplant Experiment progress reports and supporting documents : 1986

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This collection of documents support the Whooping Crane transplant experiment on Grays Lake NWR and supporting Refuges including Monte Vista, Cora, Lonetree, Jensen,...

  8. Whooping Crane Eastern Partnership 2004 annual monitoring report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Annual monitoring report on the eastern migratory whooping crane population reintroduced on Necedah National Wildlife Refuge, central Wisconsin. This report is a...

  9. Cooperative whooping crane tracking project : February-May 1984

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the spring of 1984. Report includes a information on the arrivals and banding, graph of...

  10. Whooping crane recovery activities : November, 2007 - September, 2008

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Summary of whooping crane recovery activities from November 2007 to September 2008 for the Aransas/Wood Buffalo flock, the Florida non-migratory flock, Louisiana...

  11. Whooping crane recovery activities : October, 2003 - February, 2004

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Summary of whooping crane recovery activities from October, 2003 to February, 2004 for the Aransas/Wood Buffalo flock, the Florida non-migratory flock, and captive...

  12. Whooping crane stopover site use intensity within the Great Plains

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Whooping cranes (Grus americana) of the Aransas- Wood Buffalo population migrate twice each year through the Great Plains in North America. Recovery activities for...

  13. Whooping crane recovery activities : October, 2004 - March, 2005

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Summary of whooping crane recovery activities from October, 2004 to March, 2005 for the Aransas/Wood Buffalo flock, the Florida non-migratory flock, and captive...

  14. Cooperative whooping crane tracking project : September-November 1982

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the fall of 1982. Report includes a information on the arrivals and banding, graph of...

  15. Whooping Cranes During the 1985-1986 Winter

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report attempts to summarize whooping crane data collected by the Aransas biologist during the 1985-86 winter. It focuses on the distribution of the Wood...

  16. Cooperative whooping crane tracking project : August-December 1983

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the fall of 1983. Report includes a information on the arrivals and banding, graph of...

  17. Cooperative whooping crane tracking project : September-December 1984

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the fall of 1984. Report includes a information on the arrivals and banding, graph of...

  18. Cooperative whooping crane tracking project : March-April 1986

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the spring of 1986. Report includes a information on the arrivals and banding, graph of...

  19. Cooperative whooping crane tracking project : September-December 1986

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brief report on whooping crane sightings reported to Ecological Services for the fall of 1986. Report includes a information on the arrivals and banding, graph of...

  20. Mississippi Sandhill Crane National Wildlife Refuge: Comprehensive Conservation Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This Comprehensive Conservation Plan (CCP) was written to guide management on Mississippi Sandhill Crane NWR for the next 15 years. This plan outlines the Refuge...

  1. Performance study of a heat recovery tower with synthetic (polyurethane) flow channels to operate in a solar desalination unit

    OpenAIRE

    Frederico Pinheiro Rodrigues

    2010-01-01

    Because of the lack of drinkable water in various semi-arid regions and the necessary use of renewable energies, the present work presents a performance study of a heat recovery tower to operate in a solar desalination unit for decentralized water production. The solar desalination unit has two parts: a heating unit and a desalination unit.This work presents the field results with a desalination tower with synthetic (polyurethane) flow channels. The tower operation consists of the heating ...

  2. Initial training of cranes for an airship migration

    Science.gov (United States)

    Ellis, D.H.; Olsen, G.H.; Kwitowski, J.; Chavez-Ramirez, Felipe

    2005-01-01

    We describe the first year of our efforts to train cranes to accept the unnatural stimuli associated with being transported south in cages suspended beneath an airship. All 4 experimental cranes readily acclimated to entering a suspended cage and were trained to accept being jostled while in the cage, even when the cage was transported in the back of a pickup truck. With minor changes, the training protocol is ready for use in an actual airship migration.

  3. Cranes and Crops: Investigating Farmer Tolerances toward Crop Damage by Threatened Blue Cranes ( Anthropoides paradiseus) in the Western Cape, South Africa

    Science.gov (United States)

    van Velden, Julia L.; Smith, Tanya; Ryan, Peter G.

    2016-12-01

    The Western Cape population of Blue Cranes ( Anthropoides paradiseus) in South Africa is of great importance as the largest population throughout its range. However, Blue Cranes are strongly associated with agricultural lands in the Western Cape, and therefore may come into conflict with farmers who perceive them as damaging to crops. We investigated the viability of this population by exploring farmer attitudes toward crane damage in two regions of the Western Cape, the Swartland and Overberg, using semi-structured interviews. Perceptions of cranes differed widely between regions: farmers in the Swartland perceived crane flocks to be particularly damaging to the feed crop sweet lupin (65 % of farmers reported some level of damage by cranes), and 40 % of these farmers perceived cranes as more problematic than other common bird pests. Farmers in the Overberg did not perceive cranes as highly damaging, although there was concern about cranes eating feed at sheep troughs. Farmers who had experienced large flocks on their farms and farmers who ranked cranes as more problematic than other bird pests more often perceived cranes to be damaging to their livelihoods. Biographical variables and crop profiles could not be related to the perception of damage, indicating the complexity of this human-wildlife conflict. Farmers' need for management alternatives was related to the perceived severity of damage. These results highlight the need for location-specific management solutions to crop damage by cranes, and contribute to the management of this vulnerable species.

  4. An Automatic Uav Mapping System for Supporting un (united Nations) Field Operations

    Science.gov (United States)

    Choi, K.; Cheon, J. W.; Kim, H. Y.; Lee, I.

    2016-06-01

    The United Nations (UN) has performed field operations worldwide such as peacekeeping or rescue missions. When such an operation is needed, the UN dispatches an operation team usually with a GIS (Geographic Information System) customized to a specific operation. The base maps for the GIS are generated mostly with satellite images which may not retain a high resolution and the current situation. To build an up-to-date high resolution map, we propose a UAV (unmanned aerial vehicle) based automatic mapping system, which can operate in a fully automatic way from the data acquisition of sensory data to the data processing for the generation of the geospatial products such as a mosaicked orthoimage of a target area. In this study, we analyse the requirements for UN field operations, suggest a UAV mapping system with an operation scenario, and investigate the applicability of the system. With the proposed system, we can construct a tailored GIS with up-to-date and high resolution base maps for a specific operation efficiently.

  5. An analysis of post-traumatic stress symptoms in United States Air Force drone operators.

    Science.gov (United States)

    Chappelle, Wayne; Goodman, Tanya; Reardon, Laura; Thompson, William

    2014-06-01

    Remotely piloted aircraft (RPA), commonly referred to as "drones," have emerged over the past decade as an innovative warfighting tool. Given there is a paucity of empirical research assessing drone operators, the purpose of this study was to assess for the prevalence of PTSD symptoms among this cohort. Of the 1084 United States Air Force (USAF) drone operators that participated, a total of 4.3% endorsed a pattern of symptoms of moderate to extreme level of severity meeting criteria outlined in the Diagnostic and Statistical Manual of Mental Disorders-4th edition. The incidence of PTSD among USAF drone operators in this study was lower than rates of PTSD (10-18%) among military personnel returning from deployment but higher than incidence rates (less than 1%) of USAF drone operators reported in electronic medical records. Although low PTSD rates may be promising, limitations to this study are discussed.

  6. Automated processing of whole blood units: operational value and in vitro quality of final blood components

    Science.gov (United States)

    Jurado, Marisa; Algora, Manuel; Garcia-Sanchez, Félix; Vico, Santiago; Rodriguez, Eva; Perez, Sonia; Barbolla, Luz

    2012-01-01

    Background The Community Transfusion Centre in Madrid currently processes whole blood using a conventional procedure (Compomat, Fresenius) followed by automated processing of buffy coats with the OrbiSac system (CaridianBCT). The Atreus 3C system (CaridianBCT) automates the production of red blood cells, plasma and an interim platelet unit from a whole blood unit. Interim platelet unit are pooled to produce a transfusable platelet unit. In this study the Atreus 3C system was evaluated and compared to the routine method with regards to product quality and operational value. Materials and methods Over a 5-week period 810 whole blood units were processed using the Atreus 3C system. The attributes of the automated process were compared to those of the routine method by assessing productivity, space, equipment and staffing requirements. The data obtained were evaluated in order to estimate the impact of implementing the Atreus 3C system in the routine setting of the blood centre. Yield and in vitro quality of the final blood components processed with the two systems were evaluated and compared. Results The Atreus 3C system enabled higher throughput while requiring less space and employee time by decreasing the amount of equipment and processing time per unit of whole blood processed. Whole blood units processed on the Atreus 3C system gave a higher platelet yield, a similar amount of red blood cells and a smaller volume of plasma. Discussion These results support the conclusion that the Atreus 3C system produces blood components meeting quality requirements while providing a high operational efficiency. Implementation of the Atreus 3C system could result in a large organisational improvement. PMID:22044958

  7. A CRANE AMONG THE CHICKENS?: EVALUATING A TEACHER TRAINING PROGRAMME

    Institute of Scientific and Technical Information of China (English)

    1994-01-01

    "Sometimes you try to share the ideas, they even turn up their noses at you, describing you as ’trying to be a crane among the chicks’." This rather forlorn comment comes from a middle school English teacher recently returned to his school in a remote province of China, full of enthusiasm for the new methods of teaching English gathered over two years away on a teacher-training course held in Shanghai. It gives the title to a recently published study of the fate that met this teacher and others like him after they had completed their course. Conducted by staff at Shanghai International Studies University (SISU), this set out to contribute to the evaluation of two in-service training courses for teachers of English held at that university through a follow-up study of former trainees. The study took place under the auspices of the Chinese State Education Commission and the British Overseas Development Administration, as did the two courses themselves. The most recent of these was a senior middle school teacher training (SMSTT) course for teachers working in less developed areas of China. This two-year course, designed and run at five universities, is still in operation at SISU and formed the primary focus of attention of the study. The other was a one-year course in advanced teacher training (ATT) for lecturers in higher education.

  8. Groundwater Monitoring Plan for the Reactor Technology Complex Operable Unit 2-13

    Energy Technology Data Exchange (ETDEWEB)

    Richard P. Wells

    2007-03-23

    This Groundwater Monitoring Plan describes the objectives, activities, and assessments that will be performed to support the on-going groundwater monitoring requirements at the Reactor Technology Complex, formerly the Test Reactor Area (TRA). The requirements for groundwater monitoring were stipulated in the Final Record of Decision for Test Reactor Area, Operable Unit 2-13, signed in December 1997. The monitoring requirements were modified by the First Five-Year Review Report for the Test Reactor Area, Operable Unit 2-13, at the Idaho National Engineering and Environmental Laboratory to focus on those contaminants of concern that warrant continued surveillance, including chromium, tritium, strontium-90, and cobalt-60. Based upon recommendations provided in the Annual Groundwater Monitoring Status Report for 2006, the groundwater monitoring frequency was reduced to annually from twice a year.

  9. The reliability analysis of a separated, dual fail operational redundant strapdown IMU. [inertial measurement unit

    Science.gov (United States)

    Motyka, P.

    1983-01-01

    A methodology for quantitatively analyzing the reliability of redundant avionics systems, in general, and the dual, separated Redundant Strapdown Inertial Measurement Unit (RSDIMU), in particular, is presented. The RSDIMU is described and a candidate failure detection and isolation system presented. A Markov reliability model is employed. The operational states of the system are defined and the single-step state transition diagrams discussed. Graphical results, showing the impact of major system parameters on the reliability of the RSDIMU system, are presented and discussed.

  10. Aquatic studies at the 100-HR-3 and 100-NR-1 operable units

    Energy Technology Data Exchange (ETDEWEB)

    Cushing, C.E.

    1993-04-01

    Pacific Northwest Laboratory initiated a program to characterize selected aquatic biological populations to determine (1) existing levels of inorganic chemical and radionuclide contamination, and (2) the populations` suitability as indicators of chemical releases during cleanup activities at the US Department of Energy`s Hanford Site. Following work plans for the ground-water operable units, lower trophic levels in the aquatic habitat (periphyton and caddisfly larvae) were evaluated for contaminants at the 100-HR-3 Operable Unit and 100-NR-1 Operable Unit. The results were evaluated to determine the need for further sampling. If the results showed no significant contamination compared to upriver levels, sampling would be discontinued. The periphyton community appears to be suitable for determining contamination levels. Baseline concentrations for stable chromium were established and will be useful for comparing samples collected when contaminant release is expected. Concentrations of {sup 60}Co, {sup 90}Sr, and {sup 137}Cs in periphyton were essentially below detectable limits, which will also make this community useful in detecting potential releases of radionuclides during cleanup activities. Levels for both stable chromium and radionuclides were essentially below detection limits for caddisfly larvae. Thus, these organisms may be used to monitor suspected contaminant releases from cleanup activities; if concentrations exceed detection limits, they may be related to these activities. Two candidate threatened and endangered species of molluscs occur in the Hanford Reach of the Columbia River. These are the shortface lanx (Fisherola nuttalli), which is a Washington State candidate species, and the Columbia pebblesnail (Fluminicola columbiana), which is both a state and federal candidate species. Specimens of the shortface lanx were observed in the vicinity of N Springs (100-NR-1 Operable Unit); they likely occur throughout this area.

  11. Aquatic studies at the 100-HR-3 and 100-NR-1 operable units

    Energy Technology Data Exchange (ETDEWEB)

    Cushing, C.E.

    1993-04-01

    Pacific Northwest Laboratory initiated a program to characterize selected aquatic biological populations to determine (1) existing levels of inorganic chemical and radionuclide contamination, and (2) the populations' suitability as indicators of chemical releases during cleanup activities at the US Department of Energy's Hanford Site. Following work plans for the ground-water operable units, lower trophic levels in the aquatic habitat (periphyton and caddisfly larvae) were evaluated for contaminants at the 100-HR-3 Operable Unit and 100-NR-1 Operable Unit. The results were evaluated to determine the need for further sampling. If the results showed no significant contamination compared to upriver levels, sampling would be discontinued. The periphyton community appears to be suitable for determining contamination levels. Baseline concentrations for stable chromium were established and will be useful for comparing samples collected when contaminant release is expected. Concentrations of [sup 60]Co, [sup 90]Sr, and [sup 137]Cs in periphyton were essentially below detectable limits, which will also make this community useful in detecting potential releases of radionuclides during cleanup activities. Levels for both stable chromium and radionuclides were essentially below detection limits for caddisfly larvae. Thus, these organisms may be used to monitor suspected contaminant releases from cleanup activities; if concentrations exceed detection limits, they may be related to these activities. Two candidate threatened and endangered species of molluscs occur in the Hanford Reach of the Columbia River. These are the shortface lanx (Fisherola nuttalli), which is a Washington State candidate species, and the Columbia pebblesnail (Fluminicola columbiana), which is both a state and federal candidate species. Specimens of the shortface lanx were observed in the vicinity of N Springs (100-NR-1 Operable Unit); they likely occur throughout this area.

  12. EXTENDED CES(A)RO OPERATORS ON THE BLOCH SPACE IN THE UNIT BALL OF Cn

    Institute of Scientific and Technical Information of China (English)

    胡璋剑

    2003-01-01

    The paper defines an extended Cesàro operator Tg with holomorphic symbolg in the unit ball B of Cn asWhere g(z)= ∑j=1∑n zj g/ zj is the radial derivative of g. In this paper, the author characterizes g for which Tg is bounded (or compact) on the Bloch spaceB and the little Blochspace B0.

  13. Contaminant Attenuation and Transport Characterization of 200-DV-1 Operable Unit Sediment Samples

    Energy Technology Data Exchange (ETDEWEB)

    Truex, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Szecsody, James E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qafoku, Nikolla [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Strickland, Christopher E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Moran, James J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lee, Brady D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Snyder, Michelle M.V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lawter, Amanda R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Resch, Charles T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gartman, Brandy N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhong, Lirong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Nims, Megan K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Saunders, Danielle L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Williams, Benjamin D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Horner, Jacob A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Leavy, Ian I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Baum, Steven R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Christiansen, Beren B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Clayton, Ray E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McElroy, Erin M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Appriou, Delphine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tyrrell, Kimberly J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Striluk, Miranda L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-05-15

    A laboratory study was conducted to quantify contaminant attenuation processes and associated contaminant transport parameters that are needed to evaluate transport of contaminants through the vadose zone to the groundwater. The laboratory study information, in conjunction with transport analyses, can be used as input to evaluate the feasibility of Monitored Natural Attenuation and other remedies for the 200-DV-1 Operable Unit at the Hanford Site.

  14. Discrete Sampling Test Plan for the 200-BP-5 Operable Unit

    Energy Technology Data Exchange (ETDEWEB)

    Sweeney, Mark D.

    2010-02-04

    The Discrete Groundwater Sampling Project is conducted by the Pacific Northwest National Laboratory (PNNL) on behalf of CH2M HILL Plateau Remediation Company. The project is focused on delivering groundwater samples from proscribed horizons within select groundwater wells residing in the 200-BP-5 Operable Unit (200-BP-5 OU) on the Hanford Site. This document provides the scope, schedule, methodology, and other details of the PNNL discrete sampling effort.

  15. Data validation report for the 100-HR-3 Operable Unit, fifth round groundwater samples

    Energy Technology Data Exchange (ETDEWEB)

    Vukelich, S.E. [Kearney (A.T.), Inc., Chicago, IL (United States)

    1994-01-20

    The data from the chemical analysis of 68 samples from the 100-HR-3 Operable Unit Third Quarter 1993 Groundwater Sampling Investigation and their related quality assurance samples were reviewed and validated to verify that reported sample results were of sufficient quality to support decisions regarding remedial actions performed at the site. Sample analysis included inorganics and general chemical parameters. Fifty three samples were validated for radiochemical parameters.

  16. Baseline groundwater model update for p-area groundwater operable unit, NBN

    Energy Technology Data Exchange (ETDEWEB)

    Ross, J. [Savannah River Site (SRS), Aiken, SC (United States); Amidon, M. [Savannah River Site (SRS), Aiken, SC (United States)

    2015-09-01

    This report documents the development of a numerical groundwater flow and transport model of the hydrogeologic system of the P-Area Reactor Groundwater Operable Unit at the Savannah River Site (SRS) (Figure 1-1). The P-Area model provides a tool to aid in understanding the hydrologic and geochemical processes that control the development and migration of the current tritium, tetrachloroethene (PCE), and trichloroethene (TCE) plumes in this region.

  17. Initial closed operation of the CELSS Test Facility Engineering Development Unit

    Science.gov (United States)

    Kliss, M.; Blackwell, C.; Zografos, A.; Drews, M.; MacElroy, R.; McKenna, R.; Heyenga, A. G.

    2003-01-01

    As part of the NASA Advanced Life Support Flight Program, a Controlled Ecological Life Support System (CELSS) Test Facility Engineering Development Unit has been constructed and is undergoing initial operational testing at NASA Ames Research Center. The Engineering Development Unit (EDU) is a tightly closed, stringently controlled, ground-based testbed which provides a broad range of environmental conditions under which a variety of CELSS higher plant crops can be grown. Although the EDU was developed primarily to provide near-term engineering data and a realistic determination of the subsystem and system requirements necessary for the fabrication of a comparable flight unit, the EDU has also provided a means to evaluate plant crop productivity and physiology under controlled conditions. This paper describes the initial closed operational testing of the EDU, with emphasis on the hardware performance capabilities. Measured performance data during a 28-day closed operation period are compared with the specified functional requirements, and an example of inferring crop growth parameters from the test data is presented. Plans for future science and technology testing are also discussed. Published by Elsevier Science Ltd on behalf of COSPAR.

  18. Enhanced teaching and student learning through a simulator-based course in chemical unit operations design

    Science.gov (United States)

    Ghasem, Nayef

    2016-07-01

    This paper illustrates a teaching technique used in computer applications in chemical engineering employed for designing various unit operation processes, where the students learn about unit operations by designing them. The aim of the course is not to teach design, but rather to teach the fundamentals and the function of unit operation processes through simulators. A case study presenting the teaching method was evaluated using student surveys and faculty assessments, which were designed to measure the quality and effectiveness of the teaching method. The results of the questionnaire conclusively demonstrate that this method is an extremely efficient way of teaching a simulator-based course. In addition to that, this teaching method can easily be generalised and used in other courses. A student's final mark is determined by a combination of in-class assessments conducted based on cooperative and peer learning, progress tests and a final exam. Results revealed that peer learning can improve the overall quality of student learning and enhance student understanding.

  19. [Air conditioning units and warm air blankets in the operating room].

    Science.gov (United States)

    Kerwat, Klaus; Piechowiak, Karolin; Wulf, Hinnerk

    2013-01-01

    Nowadays almost all operating rooms are equipped with air conditioning (AC units). Their main purpose is climatization, like ventilation, moisturizing, cooling and also the warming of the room in large buildings. In operating rooms they have an additional function in the prevention of infections, especially the avoidance of postoperative wound infections. This is achieved by special filtration systems and by the creation of specific air currents. Since hypothermia is known to be an unambiguous factor for the development of postoperative wound infections, patients are often actively warmed intraoperatively using warm air blankets (forced-air warming units). In such cases it is frequently discussed whether such warm air blankets affect the performance of AC units by changing the air currents or whether, in contrast, have exactly the opposite effect. However, it has been demonstrated in numerous studies that warm air blankets do not have any relevant effect on the functioning of AC units. Also there are no indications that their use increases the rate of postoperative wound infections. By preventing the patient from experiencing hypothermia, the rate of postoperative wound infections can even be decreased thereby. © Georg Thieme Verlag Stuttgart · New York.

  20. Operation and results of the prototype KM3NeT detection unit

    Science.gov (United States)

    Biagi, Simone

    2016-07-01

    KM3NeT will be a km3-scale neutrino telescope in the Mediterranean Sea. The detector will consist of blocks of about one hundred detection units. Each detection unit will host 18 digital optical modules, connected along a 700 m-long vertical structure. Electro-optical cables allow for data transmission and power supply to the optical modules. The optical module comprises 31 photomultiplier tubes of 3'', instruments to monitor environmental variables and electronic boards to communicate onshore and operate the photomultipliers. A prototype detection unit has been deployed in May 2014 at the KM3NeT-It installation site 80 km SE offshore of Capo Passero, Sicily. This prototype allowed to test the deployment procedures, the mechanics and the electronic of the apparatus, the data taking and analysis procedures. A general description of the detector and some results of the prototype are presented. The first detection unit of the KM3NeT neutrino telescope will be deployed and become operative by the end of 2015.

  1. Operation and results of the prototype KM3NeT detection unit

    Directory of Open Access Journals (Sweden)

    Biagi Simone

    2016-01-01

    Full Text Available KM3NeT will be a km3-scale neutrino telescope in the Mediterranean Sea. The detector will consist of blocks of about one hundred detection units. Each detection unit will host 18 digital optical modules, connected along a 700 m-long vertical structure. Electro-optical cables allow for data transmission and power supply to the optical modules. The optical module comprises 31 photomultiplier tubes of 3′′, instruments to monitor environmental variables and electronic boards to communicate onshore and operate the photomultipliers. A prototype detection unit has been deployed in May 2014 at the KM3NeT-It installation site 80 km SE offshore of Capo Passero, Sicily. This prototype allowed to test the deployment procedures, the mechanics and the electronic of the apparatus, the data taking and analysis procedures. A general description of the detector and some results of the prototype are presented. The first detection unit of the KM3NeT neutrino telescope will be deployed and become operative by the end of 2015.

  2. 40 CFR 60.1200 - What are the operating practice requirements for my municipal waste combustion unit?

    Science.gov (United States)

    2010-07-01

    ... requirements for my municipal waste combustion unit? 60.1200 Section 60.1200 Protection of Environment... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... Good Combustion Practices: Operating Requirements § 60.1200 What are the operating practice...

  3. Sandhill crane roost selection, human disturbance, and forage resources

    Science.gov (United States)

    Pearse, Aaron T.; Krapu, Gary; Brandt, David

    2017-01-01

    Sites used for roosting represent a key habitat requirement for many species of birds because availability and quality of roost sites can influence individual fitness. Birds select roost sites based on numerous factors, requirements, and motivations, and selection of roosts can be dynamic in time and space because of various ecological and environmental influences. For sandhill cranes (Antigone canadensis) at their main spring-staging area along the Platte River in south-central Nebraska, USA, past investigations of roosting cranes focused on physical channel characteristics related to perceived security as motivating roost distribution. We used 6,310 roost sites selected by 313 sandhill cranes over 5 spring migration seasons (2003–2007) to quantify resource selection functions of roost sites on the central Platte River using a discrete choice analysis. Sandhill cranes generally showed stronger selection for wider channels with shorter bank vegetation situated farther from potential human disturbance features such as roads, bridges, and dwellings. Furthermore, selection for roost sites with preferable physical characteristics (wide channels with short bank vegetation) was more resilient to nearby disturbance features than more narrow channels with taller bank vegetation. The amount of cornfields surrounding sandhill crane roost sites positively influenced relative probability of use but only for more narrow channels resource features that sandhill cranes selected at river channels along the Platte River, and after incorporating spatial variation due to human disturbance, our understanding of roost site selection was more robust, providing insights on how disturbance may interact with physical habitat features. Managers can use information on roost-site selection when developing plans to increase probability of crane use at existing roost sites and to identify new areas for potential use if existing sites become limited.

  4. Operational Evaluation of VEGGIE Food Production System in the Habitat Demonstration Unit

    Science.gov (United States)

    Stutte, Gary W.; Newsham, Gerard; Morrow, Robert M.; Wheeler, Raymond M.

    2011-01-01

    The 2010 Desert Research and Technology Studies (DRATS) of the VEGGIE Food Production System in the Habitat Demonstration Unit (HDU) Pressurized Excursion Module (PEM) was the first operational evaluation of salad crop production technology in a NASA analog test. A systematic evaluation of rooting media and nutrient delivery systems were evaluated for three lettuce cultivars that have shown promise as candidates for a surface based food production system. The VEGGIE nutrient delivery system worked well, was able to be maintained by multiple operators with a minimum of training, and supported excellent lettuce growth for the duration of the test. A Hazard Analysis and Critical Control Point (HACCP) evaluation was performed using ProSan(tm) as sanitation agent prior to consumption was approved, and the crew was allowed to consume the lettuce grown using the VEGGIE light cap and gravity based nutrient delivery system at the completion of the 14-day DRAT field test. The DRAT field test validated the crew operations; Growth of all lettuce cultivars was excellent. The operational DRAT field testing in the HDU identified light quality issues related to morphology and pigment development that will need to be addressed through additional testing. Feedback from the crew, ground support personnel, and human factors leads was uniformly positive on the psychological value of having the crop production system in the excursion module. A number of areas have been identified for future work, to minimize the "footprint" of the Food Production system through creative use of unused wall and floor space in the unit.

  5. Operation Evaluation of the VEGGIE Food Production System in the Habitat Demonstration Unit

    Science.gov (United States)

    Stutte, Gary W.; Newsham, Gerard; Morrow, Robert M.; Wheeler, Raymond M.

    2011-01-01

    The 2010 Desert Research and Technology Studies (DRATS) of the VEGGIE Food Production System in the Habitat Demonstration Unit (HDU) Pressurized Excursion Module (PEM) was the first operational evaluation of salad crop production technology in a NASA analog test. A systematic evaluation of rooting media and nutrient delivery systems were evaluated for three lettuce cultivars that have shown promise as candidates for a surface based food production system. The VEGGIE nutrient delivery system worked well, was able to be maintained by multiple operators with a minimum of training, and supported excellent lettuce growth for the duration of the test. A Hazard Analysis and Critical Control Point (HACCP) evaluation was performed using ProSantm as sanitation agent prior to consumption was approved, and the crew was allowed to consume the lettuce grown using the VEGGIE light cap and gravity based nutrient delivery system at the completion of the 14-day DRAT field test. The DRAT field test validated the crew operations; Growth of all lettuce cultivars was excellent. The operational DRAT field testing in the HDU identified light quality issues related to morphology and pigment development that will need to be addressed through additional testing. Feedback from the crew, ground support personnel, and human factors leads was uniformly positive on the psychological value of having the crop production system in the excursion module. A number of areas have been identified for future work, to minimize the "footprint" of the Food Production system through creative use of unused wall and floor space in the unit.

  6. Pilot-scale treatability test plan for the 200-BP-5 operable unit

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This document presents the treatability test plan for pilot-scale pump and treat testing at the 200-BP-5 Operable Unit. This treatability test plan has been prepared in response to an agreement between the U.S. Department of Energy (DOE), the U.S. Environmental Protection Agency (EPA), and the State of Washington Department of Ecology (Ecology), as documented in Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement, Ecology et al. 1989a) Change Control Form M-13-93-03 (Ecology et al. 1994) and a recent 200 NPL Agreement Change Control Form (Appendix A). The agreement also requires that, following completion of the activities described in this test plan, a 200-BP-5 Operable Unit Interim Remedial Measure (IRM) Proposed Plan be developed for use in preparing an Interim Action Record of Decision (ROD). The IRM Proposed Plan will be supported by the results of this treatability test plan, as well as by other 200-BP-5 Operable Unit activities (e.g., development of a qualitative risk assessment). Once issued, the Interim Action ROD will specify the interim action(s) for groundwater contamination at the 200-BP-5 Operable Unit. The treatability test approach is to conduct a pilot-scale pump and treat test for each of the two contaminant plumes associated with the 200-BP-5 Operable Unit. Primary contaminants of concern are {sup 99}Tc and {sup 60}Co for underwater affected by past discharges to the 216-BY Cribs, and {sup 90}Sr, {sup 239/240}Pu, and Cs for groundwater affected by past discharges to the 216-B-5 Reverse Well. The purpose of the pilot-scale treatability testing presented in this testplan is to provide the data basis for preparing an IRM Proposed Plan. To achieve this objective, treatability testing must: Assess the performance of groundwater pumping with respect to the ability to extract a significant amount of the primary contaminant mass present in the two contaminant plumes.

  7. International Space Station United States Orbital Segment Oxygen Generation System On-Orbit Operational Experience

    Science.gov (United States)

    Erickson, Robert J.; Howe, John, Jr.; Kulp, Galen W.; VanKeuren, Steven P.

    2008-01-01

    The International Space Station (ISS) United States Orbital Segment (USOS) Oxygen Generation System (OGS) was originally intended to be installed in ISS Node 3. The OGS rack delivery was accelerated, and it was launched to ISS in July of 2006 and installed in the US Laboratory Module. Various modification kits were installed to provide its interfaces, and the OGS was first activated in July of 2007 for 15 hours, In October of 2007 it was again activated for 76 hours with varied production rates and day/night cycling. Operational time in each instance was limited by the quantity of feedwater in a Payload Water Reservoir (PWR) bag. Feedwater will be provided by PWR bag until the USOS Water Recovery System (WRS) is delivered to SS in fall of 2008. This paper will discuss operating experience and characteristics of the OGS, as well as operational issues and their resolution.

  8. Book review: Sandhill and whooping cranes: Ancient voices over America's wetlands

    Science.gov (United States)

    Austin, Jane E.

    2011-01-01

    Paul Johnsgard has long been captivated by wild cranes and their unique vocalizations, courtship dances, and wide-ranging migrations. As a scientist and an admirer, Johnsgard has watched their migrations and behaviors for decades as hundreds of thousands of cranes staged each spring by the central Platte River, not far from his home in Lincoln, Nebraska. As an artist, he has skilfully captured their courtship dances and other behaviours in his exceptional line drawings. And, as an author, he has written extensively on their ecology in three earlier books: Cranes of the World (1983), Those of the Gray Wind: the Sandhill Crane (1986), and Crane Music: a Natural History of Cranes (1991). Much has happened relative to North American cranes in the 20 years since Johnsgard published Crane Music, including increased crane abundance in many areas and the completion of multiple studies on crane ecology and conservation. This new crane book serves as an update to Crane Music and provides the reader with many useful resources for observing and learning about cranes.

  9. Capture myopathy in an endangered sandhill crane (Grus canadensis pulla)

    Science.gov (United States)

    Carpenter, J.W.; Thomas, N.J.; Reeves, S.

    1991-01-01

    Despite precautions to protect cranes, a 3-year-old endangered Mississippi sandhill crane (Grus canadensis pulla) was found caught in a leghold trap in Gautier, Mississippi, on 11 November 1987. The bird could have been in the trap for up to 16 hr and was standing and struggling to escape when it was discovered. Serum chemistries of the crane on 12 November revealed elevated lactic dehydrogenase (2,880 IU/L), alanine aminotransferase (ALT) (152 IU/L), and aspartate aminotransferase (AST) (>1,000 IU/L) values. Following surgical amputation of a fractured toe, the bird never attempted to stand and was unable to stand even when manually supported. Radiographic and physical examination of both legs did not reveal any anatomical abnormalities. Despite medical care, including supportive therapy, no improvement was observed in the bird's ability to stand and to support itself, and the bird died on 19 November. Serum chemistries and the postmortem and histopathologic findings were compatible with capture myopathy described in other species. Because of the possible susceptibility of long-legged birds such as the Mississippi sandhill crane to capture myopathy, special care must be taken when trapping, handling, chemically immobilizing, and transporting these species. In addition, precautions must be taken when conducting a predator-control program to ensure that nontarget wildlife are unlikely to encounter traps. Capture myopathy has only rarely been observed in wild birds, and this case represents the first report in a Mississippi sandhill crane.

  10. Optimum Tower Crane Selection and Supporting Design Management

    Directory of Open Access Journals (Sweden)

    Hyo Won Sohn

    2014-08-01

    Full Text Available To optimize tower crane selection and supporting design, lifting requirements (as well as stability should be examined, followed by a review of economic feasibility. However, construction engineers establish plans based on data provided by equipment suppliers since there are no tools with which to thoroughly examine a support design’s suitability for various crane types, and such plans lack the necessary supporting data. In such cases it is impossible to optimize a tower crane selection to satisfy lifting requirements in terms of cost, and to perform lateral support and foundation design. Thus, this study is intended to develop an optimum tower crane selection and supporting design management method based on stability. All cases that are capable of generating an optimization of approximately 3,000 ~ 15,000 times are calculated to identify the candidate cranes with minimized cost, which are examined. The optimization method developed in the study is expected to support engineers in determining the optimum lifting equipment management.

  11. Optimum Tower Crane Selection and Supporting Design Management

    Directory of Open Access Journals (Sweden)

    Hyo Won Sohn

    2014-08-01

    Full Text Available To optimize tower crane selection and supporting design, lifting requirements (as well as stability should be examined, followed by a review of economic feasibility. However, construction engineers establish plans based on data provided by equipment suppliers since there are no tools with which to thoroughly examine a support design's suitability for various crane types, and such plans lack the necessary supporting data. In such cases it is impossible to optimize a tower crane selection to satisfy lifting requirements in terms of cost, and to perform lateral support and foundation design. Thus, this study is intended to develop an optimum tower crane selection and supporting design management method based on stability. All cases that are capable of generating an optimization of approximately 3,000 ˜ 15,000 times are calculated to identify the candidate cranes with minimized cost, which are examined. The optimization method developed in the study is expected to support engineers in determining the optimum lifting equipment management.

  12. Biogeographic Patterns of Finnish Crane Flies (Diptera, Tipuloidea

    Directory of Open Access Journals (Sweden)

    Jukka Salmela

    2012-01-01

    Full Text Available Species richness of terrestrial and freshwater biota generally decreases with increasing latitude. Some taxa, however, show an anomalous species richness pattern in a regional or global scale. The aim of this study was to examine (i regional variation in species richness, (ii faunistic composition, (iii occupancy, and (iv proportions of different distribution types of Finnish crane flies. Analyses were based on incidence data pooled into 20 biogeographical provinces. Finnish crane fly fauna consists of 335 species; the provincial richness varies from 91 to 237. The species richness of all species and saproxylic/fungivorous species decreased with increasing latitude; mire-dwelling crane flies displayed a reversed pattern (Spearman's correlations. Thirty-one species occupied a single province and 11 species were present in all provinces. Provincial assemblages showed a strong latitudinal gradient (NMS ordination and faunistic distance increased with increasing geographical distance (Mantel test. Nearly half (48% of the Finnish crane flies are Trans-Palaearctic, roughly one-third (34% are West Palaearctic, and only 16 and 2% are Holarctic and Fennoscandian, respectively. Endemic Fennoscandian species are discussed in detail; most likely there are no true endemic crane flies in this region.

  13. Discrete phase model representation of particulate matter (PM) for simulating PM separation by hydrodynamic unit operations.

    Science.gov (United States)

    Dickenson, Joshua A; Sansalone, John J

    2009-11-01

    Modeling the separation of dilute particulate matter (PM) has been a topic of interest since the introduction of unit operations for clarification of rainfall-runoff. One consistent yet controversial issue is the representation of PM and PM separation mechanisms for treatment. While Newton's Law and surface overflow rate were utilized, many historical models represented PM as a lumped gravimetric index largely out of economy and lack of particle analysis methods. As a result such models did not provide information about particle fate in or through a unit operation. In this study, PM discrete phase modeling (DPM) and computational fluid dynamics (CFD) are applied to model PM fate as a function of particle size and flow rate in two common types of hydrodynamic separator (HS) units. The study examines the discretization requirements (as a discretization number, DN) and errors for particle size distributions (PSDs) that range from the common heterodisperse to a monodisperse PSD. PSDs are categorized based on granulometric indices. Results focus on ensuring modeling accuracy while examining the role of size dispersivity and overall PM fineness on DN requirements. The fate of common heterodisperse PSDs is accurately predicted for a DN of 16, whereas a single particle size index, commonly the d(50m), is limited to monodisperse PSDs in order to achieve similar accuracy.

  14. Research and management to increase whooping crane chick survival on Necedah National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report provides a complete record of whooping crane reproduction of the eastern migratory whooping crane population from 2005 through 2015, presents results of...

  15. Research note: Salmonella enteritidis and Arizona hinshawii isolated from wild sandhill cranes

    Science.gov (United States)

    Windingstad, R.M.; Trainer, D.O.; Duncan, R.M.

    1977-01-01

    Salmonella enteritidis serotype Rubislaw and Arizona hinshawii were isolated from cloacal swabs of 'healthy' live-trapped sandhill cranes (Grus canadensis tabida) in Indiana and Wisconsin. These respective isolations were the first reported from wild sandhill cranes.

  16. Water‐Data Report 413723083123801 Crane Creek at Ottawa NWR-2014

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Water levels and water quality parameters recorded on Crane Creek. Water-Data Report 2013 413723083123801 Crane Creek Mouth at Ottawa NWR LOCATION: Lat. 41°37'23"N,...

  17. Water‐Data Report 413723083123801 Crane Creek at Ottawa NWR-2013

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Water levels and water quality parameters recorded on Crane Creek. Water-Data Report 2013 413723083123801 Crane Creek Mouth at Ottawa NWR LOCATION: Lat. 41°37'23"N,...

  18. Sandhill crane aerial surveys in Alaska and the Yukon Territory, 1957-1980

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Sandhill cranes have been recorded on Alaska waterfowl breeding population surveys since 1957. Aerial observations provide mean indexes of 2,200 cranes for...

  19. Population genetic structure in the eastern population of Greater Sandhill Cranes (Grus canadensis Tabida)

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Sandhill Crane (SACR; Grus canadensis) is the most populous of the 15 extant crane species. Their breeding range covers the majority of the continental U.S. and...

  20. The Applied Meteorology Unit: Nineteen Years Successfully Transitioning Research into Operations for America's Space Program

    Science.gov (United States)

    Madura, John T.; Bauman, William H.; Merceret, Francis J.; Roeder, William P.; Brody, Frank C.; Hagemeyer, Bartlett C.

    2010-01-01

    The Applied Meteorology Unit (AMU) provides technology transition and technique development to improve operational weather support to the Space Shuttle and the entire American space program. The AMU is funded and managed by NASA and operated by a contractor that provides five meteorologists with a diverse mix of advanced degrees, operational experience, and associated skills including data processing, statistics, and the development of graphical user interfaces. The AMU's primary customers are the U.S. Air Force 45th Weather Squadron at Patrick Air Force Base, the National Weather Service Spaceflight Meteorology Group at NASA Johnson Space Center, and the National Weather Service Melbourne FL Forecast Office. The AMU has transitioned research into operations for nineteen years and worked on a wide range of topics, including new forecasting techniques for lightning probability, synoptic peak winds,.convective winds, and summer severe weather; satellite tools to predict anvil cloud trajectories and evaluate camera line of sight for Space Shuttle launch; optimized radar scan strategies; evaluated and implemented local numerical models; evaluated weather sensors; and many more. The AMU has completed 113 projects with 5 more scheduled to be completed by the end of 2010. During this rich history, the AMU and its customers have learned many lessons on how to effectively transition research into operations. Some of these lessons learned include collocating with the operational customer and periodically visiting geographically separated customers, operator submitted projects, consensus tasking process, use of operator primary advocates for each project, customer AMU liaisons with experience in both operations and research, flexibility in adapting the project plan based on lessons learned during the project, and incorporating training and other transition assistance into the project plans. Operator involvement has been critical to the AMU's remarkable success and many awards

  1. Multiobjective Optimization of a Counterrotating Type Pump-Turbine Unit Operated at Turbine Mode

    Directory of Open Access Journals (Sweden)

    Jin-Hyuk Kim

    2014-05-01

    Full Text Available A multiobjective optimization for improving the turbine output and efficiency of a counterrotating type pump-turbine unit operated at turbine mode was carried out in this work. The blade geometry of both the runners was optimized using a hybrid multiobjective evolutionary algorithm coupled with a surrogate model. Three-dimensional Reynolds-averaged Navier-Stokes equations with the shear stress transport turbulence model were discretized by finite volume approximations and solved on hexahedral grids to analyze the flow in the pump-turbine unit. As major hydrodynamic performance parameters, the turbine output and efficiency were selected as objective functions with two design variables related to the hub profiles of both the runner blades. These objectives were numerically assessed at twelve design points selected by Latin hypercube sampling in the design space. Response surface approximation models for the objectives were constructed based on the objective function values at the design points. A fast nondominated sorting genetic algorithm for the local search coupled with the response surface approximation models was applied to determine the global Pareto-optimal solutions. The trade-off between the two objectives was determined and described with respect to the Pareto-optimal solutions. The results of this work showed that the turbine outputs and efficiencies of optimized pump-turbine units were simultaneously improved in comparison to the reference unit.

  2. 78 FR 5167 - BE-9: Quarterly Survey of Foreign Airline Operators' Revenues and Expenses in the United States

    Science.gov (United States)

    2013-01-24

    ... Bureau of Economic Analysis XRIN 0691-XC003 BE-9: Quarterly Survey of Foreign Airline Operators' Revenues... Foreign Airline Operators' Revenues and Expenses in the United States (BE-9). This mandatory survey is..., agents, or other representatives of foreign airline operators that transport passengers or freight and...

  3. Selection of Forklift Unit for Warehouse Operation by Applying Multi-Criteria Analysis

    Directory of Open Access Journals (Sweden)

    Predrag Atanasković

    2013-07-01

    Full Text Available This paper presents research related to the choice of the criteria that can be used to perform an optimal selection of the forklift unit for warehouse operation. The analysis has been done with the aim of exploring the requirements and defining relevant criteria that are important when investment decision is made for forklift procurement, and based on the conducted research by applying multi-criteria analysis, to determine the appropriate parameters and their relative weights that form the input data and database for selection of the optimal handling unit. This paper presents an example of choosing the optimal forklift based on the selected criteria for the purpose of making the relevant investment decision.

  4. Cooling unit for a superconducting power cable. Two years successful operation

    Energy Technology Data Exchange (ETDEWEB)

    Herzog, Friedhelm [Messer Group GmbH, Krefeld (Germany); Kutz, Thomas [Messer Industriegase GmbH, Bad Soden (Germany); Stemmle, Mark [Nexans Deutschland GmbH, Hannover (Germany); Kugel, Torsten [Westnetz GmbH, Essen (Germany)

    2016-07-01

    High temperature super conductors (HTS) can efficiently be cooled with liquid nitrogen down to a temperature of 64 K (-209 C). Lower temperatures are not practical, because nitrogen becomes solid at 63 K (-210 C). To achieve this temperature level the coolant has to be vaporized below atmospheric pressure. Messer has developed a cooling unit with an adequate vacuum subcooler, a liquid nitrogen circulation system, and a storage vessel for cooling an HTS power cable. The cooling unit was delivered in 2013 for the German AmpaCity project of RWE Deutschland AG, Nexans and Karlsruhe Institute of Technology. Within this project RWE and Nexans installed the worldwide longest superconducting power cable in the city of Essen, Germany. The cable is in operation since March 10th, 2014.

  5. Research into 2D Dynamics and Control of Small Oscillations of a Cross-Beam during Transportation by Two Overhead Cranes

    Directory of Open Access Journals (Sweden)

    Alexander V. Perig

    2017-01-01

    Full Text Available A new mathematical model of a 3DOF 2D mechanical system “transported cross-beam, two moving bridge cranes” has been proposed. Small system oscillations have been derived through the introduction of Lagrange equations. The numerical estimation of 3DOF system motion has been carried out with equation-based Modelica language. The present article uses the Lagrange method and numerical and optimization methods, realized with JModelica.org and Optimica freeware. The absolute swaying of the cross-beam with respect to the displacement of the two moving bridge cranes was estimated. The phase portraits of the 3DOF system for linear and angular coordinates were presented. An open loop optimal control problem was posed for the motion of the bridge cranes. A “bang-bang” control strategy was implemented for the derivation of an optimal control solution, which enables the travel of two bridge cranes at a prescribed distance for minimum time and minimum swaying of a heavy cross-beam. The derived results of the numerical simulation can be easily practically realized by crane operators with good agreement with simple engineering estimations. The proposed control strategy enables synchronous motion of two bridge cranes with a cross-beam that practically solves the posed problem of unwanted excessive oscillations of a heavy cross-beam during transportation.

  6. Cooling unit for the AmpaCity project - One year successful operation

    Science.gov (United States)

    Herzog, Friedhelm; Kutz, Thomas; Stemmle, Mark; Kugel, Torsten

    2016-12-01

    High temperature super conductors (HTS) can efficiently be cooled with liquid nitrogen down to a temperature of 64 K (-209 °C). Lower temperatures are not practical, because at 63 K (-210 °C) nitrogen becomes solid. To achieve this temperature level the coolant has to be vaporized below atmospheric pressure. Messer has developed a cooling unit with an adequate vacuum subcooler, a liquid nitrogen circulation system, and a storage vessel for cooling an HTS-power cable. Liquid nitrogen is circulated through the superconducting cable to take out the heat, and afterward it is pumped through the subcooler to be recooled. In the circulation system liquid nitrogen is used as a dielectric fluid and as a heat transfer medium. It stays always liquid (subcooled) and does not vaporize. On the secondary side of the subcooler liquid nitrogen from the storage vessel is used as refrigerant. It is vaporized under a pressure of 150 mbar to achieve the desired low temperatures. The cooling unit was delivered in 2013 for the German AmpaCity project of RWE Deutschland AG, Nexans and Karlsruhe Institute of Technology. Within this project RWE and Nexans installed the worldwide longest superconducting power cable in the city of Essen, Germany. The cooling unit cools a 10 kV concentric HTS cable (40 MV A) with a length of 1000 m. The cable is in operation since March 10th, 2014. After more than one year of practical operation many important figures from cable and cooling unit are available. These figures are discussed and a total energy balance is shown to compare liquid nitrogen cooling with alternative mechanical cooling systems.

  7. Behavior of sandhill cranes harnessed with different satellite transmitters

    Science.gov (United States)

    Olsen, G.H.; Ellis, D.H.; Landfried, S.E.; Miller, L.H.; Klugman, S.S.; Fuller, M.R.; Vermillion, C.H.

    1992-01-01

    The effectiveness of various attachment methods and designs of platform transmitting terminals (PTT's) was tested on captive sandhill cranes (Grus canadensis) at the Patuxent Wildlife Research Center, Laurel, Maryland, during 1989-91. Combinations of attachment and transmitter designs included neoprene cord harness with batteries separate from the transmitter (2 harness designs), Teflon ribbon harness with batteries incorporated into the transmitter package (4 transmitter models), and a package attached directly to the bird with epoxy glue only. Physical effects seen on cranes wearing PTT's ranged from skin lacerations (caused by rubbing of harness material) to no observed effects (other than feather wear). The most successful harness material and design utilized a Teflon ribbon harness with the 4 ribbon ends from the transmitter forming a neck loop and a body loop joined at the sternum. Time spent by sandhill cranes performing most activities did not change after transmitter attachment using this harness method.

  8. Operable Unit 3: Proposed Plan/Environmental Assessment for interim remedial action

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    This document presents a Proposed Plan and an Environmental Assessment for an interim remedial action to be undertaken by the US Department of Energy (DOE) within Operable Unit 3 (OU3) at the Fernald Environmental Management Project (FEMP). This proposed plan provides site background information, describes the remedial alternatives being considered, presents a comparative evaluation of the alternatives and a rationnale for the identification of DOE`s preferred alternative, evaluates the potential environmental and public health effects associated with the alternatives, and outlines the public`s role in helping DOE and the EPA to make the final decision on a remedy.

  9. Quality and productivity drive innovation and improvement at United Technologies Aerospace Operations, Inc.

    Science.gov (United States)

    Jamar, L. G.

    1986-01-01

    Quality and innovation are the hallmarks of the national space program. In programs that preceded the Shuttle Program the emphasis was on meeting the risks and technical challenges of space with safety, quality, reliability, and success. At United Technologies Aerospace Operations, Inc. (UTAO), the battle has developed along four primary fronts. These fronts include programs to motivate and reward people, development and construction of optimized processes and facilities, implementation of specifically tailored management systems, and the application of appropriate measurement and control systems. Each of these initiatives is described. However, to put this quality and productivity program in perspective, UTAO and its role in the Shuttle Program are described first.

  10. Best management practices plan for the Lower East Fork Poplar Creek Operable Unit, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    This plan was prepared in support of the Phase II Remedial Design Report (DOE/OR/01-1449&D1) and in accordance with requirements under CERCLA to present the plan for best management practices to be followed during the remediation. This document provides the Environmental Restoration Program with information about spill prevention and control, water quality monitoring, good housekeeping practices, sediment and erosion control measures, and inspections and environmental compliance practices to be used during Phase II of the remediation project for the Lower East Fork Poplar Creek Operable Unit.

  11. Remedial investigation/feasibility study work plan for the 100-BC-2 operable unit, Hanford Site, Richland, Washington

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    This work plan and attached supporting project plans establish the operable unit setting and the objectives, procedures, tasks, and schedule for conducting the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) remedial investigation/feasibility study (RI/FS) for the 100-BC-2 operable unit in the 100 Area of the Hanford Site. The 100 Area is one of four areas at the Hanford Site that are on the US Environmental Protection Agency`s (EPA) National Priorities List under CERCLA. The 100-BC-2 operable unit is one of two source operable units in the 100-B/C Area (Figure ES-1). Source operable units are those that contain facilities and unplanned release sites that are potential sources of hazardous substance contamination. The 100-BC-2 source operable unit contains waste sites that were formerly in the 100-BC-2, 100-BC-3, and 100-BC-4 operable units. Because of their size and geographic location, the waste sites from these two operable units were added to 100-BC-2. This allows for a more efficient and effective investigation of the remaining 100-B/C Reactor area waste sites. The investigative approach to waste sites associated with the 100-BC-2 operable unit are listed in Table ES-1. The waste sites fall into three general categories: high priority liquid waste disposal sites, low priority liquid waste disposal sites, and solid waste burial grounds. Several sites have been identified as candidates for conducting an IRM. Two sites have been identified as warranting additional limited field sampling. The two sites are the 116-C-2A pluto crib, and the 116-C-2C sand filter.

  12. Command shaping for residual vibration free crane maneuvers

    Energy Technology Data Exchange (ETDEWEB)

    Parker, G.G.; Petterson, B.; Dohrmann, C.; Robinett, R.D.

    1995-07-01

    Cranes used in the construction and transportation industries are generally devices with multiple degrees of freedom including variable load-line length, variable jib length (usually via a trolley), and variable boom angles. Point-to-point payload maneuvers using cranes are performed so as not to excite the spherical pendulum modes of their cable and payload assemblies. Typically, these pendulum modes, although time-varying, exhibit low frequencies. Current crane maneuvers are therefore performed slowly contributing to high construction and transportation costs. This investigation details a general method for applying command shaping to various multiple degree of freedom cranes such that the payload moves to a specified point without residual oscillation. A dynamic programming method is used for general command shaping for optimal maneuvers. Computationally, the dynamic programming approach requires order M calculations to arrive at a solution, where M is the number of discretizations of the input commands. This feature is exploited for the crane command shaping problem allowing for rapid calculation of command histories. Fast generation of commands is a necessity for practical use of command shaping for the applications described in this work. These results are compared to near-optimal solutions where the commands are linear combinations of acceleration pulse basis functions. The pulse shape is required due to hardware requirements. The weights on the basis functions are chosen as the solution to a parameter optimization problem solved using a Recursive Quadratic Programming technique. Simulation results and experimental verification for a variable load-line length rotary crane are presented using both design procedures.

  13. Logistics measurement and performance for United States-Mexican operations under NAFTA

    Energy Technology Data Exchange (ETDEWEB)

    Fawcett, S.E. [Michigan State Univ., East Lansing, MI (United States); Smith, S.R. [Brigham Young Univ., Laie, HI (United States)

    1995-12-01

    An empirical study utilizing a survey methodology was undertaken to explore the issues surrounding logistics performance under the recently enacted North American Free Trade Agreement (NAFTA). The study surveyed 524 senior level managers directly responsible for their strategic business units` operations involving Mexican production sharing. The study focused on what role Mexican production facilities take in the production process, relative technology level, planning activities, final destination of products, and what level of logistics performance was required to successfully operate. Some of the findings suggest a need to reevaluate current strategies to incorporate logistics support systems. Many benefits of true integration may have been overlooked since logistics was given a secondary position when strategies were formulated. Excessive tranportation and distribution costs may be lowered if logistics is given a higher emphasis in corporate decision making.

  14. Maintenance and operation of a hydroelectric unit of energy in a power system using virtual reality

    Energy Technology Data Exchange (ETDEWEB)

    de Sousa, Marcos Paulo Alves [Federal University of Para, Faculty of Engineering Computing, Augusto Correa Street, No. 1, Belem, Para (Brazil); Emilio Goeldi Museum, Service Data Processing Department, Perimetral Avenue No. 1901, Belem, Para (Brazil); Filho, Manoel Ribeiro; Nunes, Marcus Vinicius Alves; Lopes, Andrey da Costa [Federal University of Para, Faculty of Engineering Computing, Augusto Correa Street, No. 1, Belem, Para (Brazil)

    2010-07-15

    This paper presents a new approach to training for hydroelectric unit of energy (HUE) by using virtual reality Non-immersive techniques. The software offers two modules of training: maintenance and operation. The first module, maintenance, uses the learning approach based on practice and offers different training levels, divided into three modes: automatic, guided, and exploratory, in which these modes are accessed according to the acquired degree of knowledge by the trainee in relation to maintenance procedures. The second module, allows the trainee to visualize the operation of HUE during a certain event as the electromechanical dynamics of the turbine-generator assemblage in the virtual world by the visualization of several requisite conditions before the startup-shutdown procedure of HUE. (author)

  15. 75 FR 56487 - Airworthiness Directives; Erickson Air-Crane Incorporated Model S-64F Helicopters

    Science.gov (United States)

    2010-09-16

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Erickson Air-Crane... rulemaking (NPRM). SUMMARY: This document proposes adopting a new airworthiness directive (AD) for Erickson Air-Crane Incorporated (Erickson Air-Crane) Model S- 64F helicopters. The AD would require, at...

  16. China's First Satellite Tracking of Migration Route of Black-necked Cranes

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ Teaming up with colleagues at home and abroad, CAS scientists launched China's first ever satellite tracking project on Black-necked Cranes in late February at the National Dashanbao Black-necked Crane Natural Reserve in southwest China's Yunnan Province. Its objective is to understand the migration route of the crane's eastern population so as to better protect this rare species.

  17. 30 CFR 56.16015 - Work or travel on overhead crane bridges.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Work or travel on overhead crane bridges. 56... Materials Storage and Handling § 56.16015 Work or travel on overhead crane bridges. No person shall work from or travel on the bridge of an overhead crane unless the bridge is provided with...

  18. 30 CFR 57.16015 - Work or travel on overhead crane bridges.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Work or travel on overhead crane bridges. 57... MINES Materials Storage and Handling § 57.16015 Work or travel on overhead crane bridges. No person shall work from or travel on the bridge of an overhead crane unless the bridge is provided...

  19. Dynamic analysis of the gantry crane used for transporting BOP

    Directory of Open Access Journals (Sweden)

    Stanisław WOJCIECH

    2008-01-01

    Full Text Available In the paper the dynamic analysis of a gantry crane used for transporting of BOP (BlowOut Preventer is presented. The crane is placed on a drilling platform. Sea waves cause motion of the platform and the load. Description of such systems can be used in the design process of control systems which allows us to compensate waving. Homogenous transformations and joint coordinates are used to describe behavior of the system. Equations of motion are derived using the Lagrange equations of the second order. In the paper the results of numerical calculations are presented as well.

  20. Overview of the Habitat Demonstration Unit Power System Integration and Operation at Desert RATS 2010

    Science.gov (United States)

    Colozza, Anthony J.; George, Pat; Gambrell, Ronnie; Chapman, Chris

    2013-01-01

    A habitat demonstration unit (HDU) was constructed at NASA Johnson Space Center (JSC) and designed by a multicenter NASA team led out of NASA Kennedy Space Center (KSC). The HDU was subsequently utilized at the 2010 Desert Research and Technology Studies (RATS) program held at the Black Point Lava Flow in Arizona. This report describes the power system design, installation and operation for the HDU. The requirements for the power system were to provide 120 VAC, 28 VDC, and 120 VDC power to the various loads within the HDU. It also needed to be capable of providing power control and real-time operational data on the load's power consumption. The power system had to be capable of operating off of a 3 phase 480 VAC generator as well as 2 solar photovoltaic (PV) power systems. The system operated well during the 2 week Desert RATS campaign and met all of the main goals of the system. The power system is being further developed to meet the future needs of the HDU and options for this further development are discussed.

  1. Light weight portable operator control unit using an Android-enabled mobile phone

    Science.gov (United States)

    Fung, Nicholas

    2011-05-01

    There have been large gains in the field of robotics, both in hardware sophistication and technical capabilities. However, as more capable robots have been developed and introduced to battlefield environments, the problem of interfacing with human controllers has proven to be challenging. Particularly in the field of military applications, controller requirements can be stringent and can range from size and power consumption, to durability and cost. Traditional operator control units (OCUs) tend to resemble laptop personal computers (PCs), as these devices are mobile and have ample computing power. However, laptop PCs are bulky and have greater power requirements. To approach this problem, a light weight, inexpensive controller was created based on a mobile phone running the Android operating system. It was designed to control an iRobot Packbot through the Army Research Laboratory (ARL) in-house Agile Computing Infrastructure (ACI). The hardware capabilities of the mobile phone, such as Wi- Fi communications, touch screen interface, and the flexibility of the Android operating system, made it a compelling platform. The Android based OCU offers a more portable package and can be easily carried by a soldier along with normal gear requirements. In addition, the one hand operation of the Android OCU allows for the Soldier to keep an unoccupied hand for greater flexibility. To validate the Android OCU as a capable controller, experimental data was collected evaluating use of the controller and a traditional, tablet PC based OCU. Initial analysis suggests that the Android OCU performed positively in qualitative data collected from participants.

  2. Tracheotomy in Pediatric Patients: In Operating Room or Intensive Care Unit?

    Directory of Open Access Journals (Sweden)

    Umut Kaygusuz

    2014-08-01

    Full Text Available Introduction: The morbidity and mortality rates of tracheotomy are higher in the pediatric population because the incision is small and the trachea is more prone to surgical trauma. Tracheotomy procedure is mostly performed in operating room in most institutions. The aim of the study is to compare the outcomes of tracheotomy procedures between intensive care unit (ICU and operating room (OR in terms of pitfalls, complications and family preferences. Materials and Methods: In between June 2012 and July 2013, at a single institution, 39 patients were prospectively analyzed for age, gender, primary pathology, tracheotomy indications, location of operation, the duration of family consent, perioperative complications and presence of decanulation. Results: Male/female ratio was 20/19. Mean age was 49.9±52.5 (4-204 months. Tracheotomy procedure was performed in OR in 19 patients (45% and in ICU in 20 (54.5% patients. There was no statistically significant difference between groups in terms of complications (OR-48.7%, ICU-51.3%. The time of informed consent was significantly shorter in ICU patients. Conclusions: There is no significant difference in terms of safety for tracheotomy procedure in ICU or OR. Parents give approval to a bedside invasive procedure faster. The words ‘Surgery’ and ‘Operating room’ can easily confuse the parents, extend the duration for endolaryngeal intubation, and increase the cost and labour loss.

  3. Steering quantum-memory-assisted entropic uncertainty under unital and nonunital noises via filtering operations

    Science.gov (United States)

    Huang, Ai-Jun; Shi, Jia-Dong; Wang, Dong; Ye, Liu

    2017-02-01

    In this work, we investigate the dynamic features of the entropic uncertainty for two incompatible measurements under local unital and nonunital channels. Herein, we choose Pauli operators σ _x and σ _z as a pair of observables of interest measuring on particle A, and the uncertainty can be predicted when particle A is entangled with quantum memory B. We explore the dynamics of the uncertainty for the measurement under local unitary (phase-damping) and nonunitary (amplitude-damping) channels, respectively. Remarkably, we derive the entropic uncertainty relation under three different kinds of measurements of Pauli-observable pair under various realistic noisy environments; it has been found that the entropic uncertainty has the same tendency of its evolution during the AD and PD channel when we choose σ _x and σ _y measurement. Besides, we find out that the entropic uncertainty will have an optimal value if one chooses σ _x and σ _z as the measurement incompatibility, comparing with others. Furthermore, in order to reduce the entropic uncertainty in noisy environment, we propose an effective strategy to steer the amount by means of implementing a filtering operation on the particle under the two types of channels, respectively. It turns out that this operation can greatly reduce the entropic uncertainty by modulation of the operation strength. Thus, our investigations might offer an insight into the dynamics and steering of the entropic uncertainty in an open system.

  4. [Microsatellite data verify low genetic differentiation between western and eastern subspecies of the common crane Grusgrus L. (Gruidae, Aves)].

    Science.gov (United States)

    Mudrik, E A; Kashentseva, T A; Redchuk, P S; Politov, D V

    2015-01-01

    Using a set of 10 microsatellite loci (Gram-22, Gram-30, Gpa-12, Gpa-38, Gpa-39, Gj-M15, Gj-M34, Gj-4066, Gj-8077, Gj-2298) a high level of genetic variability (N(A) = 10.2, H(O) = = 0.684, H(E) = 0.728) and low genetic differentiation (F(ST) = 0.011) in the Common crane (Grus grus L.) was detected throughout its range. Genetic diversity in disputed western (G. g. grus) and eastern (G. g. lilfordi) sub- species was shown to be similar. Spatial distribution of multi-locus individual genotypes has not been revealed (R(XY) = 0.017). Despite low differentiation, subspecies and local populations of the Common crane should be considered as separate conservational units. Organization of programs for gene pool conservation and monitor- ing requires more detailed analysis based on combined analysis of various molecular markers.

  5. Mitochondrial phylogeography, subspecific taxonomy, and conservation genetics of sandhill cranes (Grus canadensis; Aves: Gruidae)

    Science.gov (United States)

    Rhymer, J.M.; Fain, M.G.; Austin, J.E.; Johnson, D.H.; Krajewski, C.

    2001-01-01

    Six subspecies of sandhill cranes (Grus canadensis) have been denoted based on perceived morphological and/or breeding locality differences among them. Three subspecies are migratory, breeding from the high arctic in North America and Siberia (lesser sandhill, G. c. canadensis), south through central Canada (Canadian sandhill, G. c. rowani) and into the northern United States (greater sandhill, G. c. tabida). A review of sandhill crane taxonomy indicates that the size variation, on the basis of which these subspecies were named, may be clinal and not diagnostic. The other three subspecies, all listed as endangered or threatened, are non-migratory, resident in Florida (G. c. pratensis), Mississippi (G. c. pulla), and Cuba (G. c. nesiotes). We used analysis of mitochondrial DNA control region (CR) sequences to determine whether haplotypes representing current subspecies show any genetic cohesion or are more consistent with a pattern of clinal variation in morphology. CR sequences indicate that only two highly divergent (5.3%) lineages of sandhill cranes occur in North America: one lineage composed only of arctic-nesting G. c. canadensis, the other of the remaining North American subspecies (we lack data on the Cuban population). The deep split between lineages is consistent with an estimated isolation of approximately 1.5 Mya (mid-Pleistocene), while the distribution of mutational changes within lineages is consistent with an hypothesis of rapid, post-Pleistocene population expansions. No other phylogeographic structuring is concordant with subspecific boundaries, however, analysis of molecular variance indicates that there is significant population genetic differentiation among all subspecies except G. c. tabida and G. c. rowani, which are indistinguishable. We suggest that recognition of the recently named G. c. rowani be abandoned.

  6. Do different populations of Aphanius dispar in Southern Iran form Operational Taxonomic Units (OUTs?

    Directory of Open Access Journals (Sweden)

    Azad Teimori

    2015-10-01

    Full Text Available Deciphering the exact fundamental relations of morphological differentiation among isolated populations of animal species is generally difficult. Usually changes in morphology are resulted from adaptation to different environmental conditions (ecoplasticity or represent an expression of genetic differences and/or gene pool pauperization, and in most instances, however, changes in morphology are the result of the interplay between environmental factors and genetic plasticity. In this study, the morphology and molecular phylogenies of common tooth-carp populations (Aphanius dispar were studied in three basins in Southern part of Iran to discuss an important aspect relate to the question whether morphologically differentiated populations of a single species function as Operational Taxonomic Units. All morphological analyses were revealed significant and strong morphological differentiation between the populations that corresponds well with their zoogeography and their molecular phylogeny in geographically isolated basins. Therefore, it can be concluded that when the interaction between gene flow among populations and natural selection is resulted owing to a long evolutionary history, then the observed morphological differences can be functioned as different Operational Taxonomic Units (OTUs in subspecies or even species levels. In addition, biological characteristics of the A. dispar, its high tolerance, geological and ecological conditions in Southern Iran are the main factors that increase chance of reproductive isolation and genetic diversity in this region.

  7. Explicit isospectral flows associated to the AKNS operator on the unit interval. II

    Science.gov (United States)

    Amour, Laurent

    2012-10-01

    Explicit flows associated to any tangent vector fields on any isospectral manifold for the AKNS operator acting in L2 × L2 on the unit interval are written down. The manifolds are of infinite dimension (and infinite codimension). The flows are called isospectral and also are Hamiltonian flows. It is proven that they may be explicitly expressed in terms of regularized determinants of infinite matrix-valued functions with entries depending only on the spectral data at the starting point of the flow. The tangent vector fields are decomposed as ∑ξkTk where ξ ∈ ℓ2 and the Tk ∈ L2 × L2 form a particular basis of the tangent vector spaces of the infinite dimensional manifold. The paper here is a continuation of Amour ["Explicit isospectral flows for the AKNS operator on the unit interval," Inverse Probl. 25, 095008 (2009)], 10.1088/0266-5611/25/9/095008 where, except for a finite number, all the components of the sequence ξ are zero in order to obtain an explicit expression for the isospectral flows. The regularized determinants induce counter-terms allowing for the consideration of finite quantities when the sequences ξ run all over ℓ2.

  8. Current Conditions Risk Assessment for the 300-FF-5 Groundwater Operable Unit

    Energy Technology Data Exchange (ETDEWEB)

    Miley, Terri B.; Bunn, Amoret L.; Napier, Bruce A.; Peterson, Robert E.; Becker, James M.

    2007-11-01

    This report updates a baseline risk assessment for the 300 Area prepared in 1994. The update includes consideration of changes in contaminants of interest and in the environment that have occurred during the period of interim remedial action, i.e., 1996 to the present, as well as the sub-regions, for which no initial risk assessments have been conducted. In 1996, a record of decision (ROD) stipulated interim remedial action for groundwater affected by releases from 300 Area sources, as follows: (a) continued monitoring of groundwater that is contaminated above health-based levels to ensure that concentrations continue to decrease, and (b) institutional controls to ensure that groundwater use is restricted to prevent unacceptable exposure to groundwater contamination. In 2000, the groundwater beneath the two outlying sub-regions was added to the operable unit. In 2001, the first 5-year review of the ROD found that the interim remedy and remedial action objectives were still appropriate, although the review called for additional characterization activities. This report includes a current conditions baseline ecological and human health risk assessment using maximum concentrations in the environmental media of the 300-FF-5 Operable Unit and downstream conditions at the City of Richland, Washington. The scope for this assessment includes only current measured environmental concentrations and current use scenarios. Future environmental concentrations and future land uses are not considered in this assessment.

  9. Phase I and II feasibility study report for the 300-FF-5 operable unit

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The purpose of this Phase I/II feasibility study is to assemble and screen a list of alternatives for remediation of the 300-FF-5 operable site on the Hanford Reservation. This screening is based on information gathered in the Phase I Remedial Investigation (RI) and on currently available information on remediation technologies. The alternatives remaining after screening provide a range of response actions for remediation. In addition, key data needs are identified for collection during a Phase II RI (if necessary). This Phase I/II FS represents a primary document as defined by the Tri-Party Agreement, but will be followed by a Phase III FS that will further develop the alternatives and provide a detailed evaluation of them. The following remedial action objectives were identified for the 300-FF-5 operable unit: Limit current human exposure to contaminated groundwater in the unit; Limit discharge of contaminated groundwater to the Columbia River; Reduce contaminant concentrations in groundwater below acceptable levels by the year 2018.

  10. Interprofessional rhetoric and operational realities: an ethnographic study of rounds in four intensive care units.

    Science.gov (United States)

    Paradis, Elise; Leslie, Myles; Gropper, Michael A

    2016-10-01

    Morning interprofessional rounds (MIRs) are used in critical care medicine to improve team-based care and patient outcomes. Given existing evidence of conflict between and dissatisfaction among rounds participants, this study sought to better understand how the operational realities of care delivery in the intensive care unit (ICU) impact the success of MIRs. We conducted a year-long comparative ethnographic study of interprofessional collaboration and patient and family involvement in four ICUs in tertiary academic hospitals in two American cities. The study included 576 h of observation of team interactions, 47 shadowing sessions and 40 clinician interviews. In line with best practices in ethnographic research, data collection and analysis were done iteratively using the constant comparative method. Member check was conducted regularly throughout the project. MIRs were implemented on all units with the explicit goals of improving team-based and patient-centered care. Operational conditions on the units, despite interprofessional commitment and engagement, appeared to thwart ICU teams from achieving these goals. Specifically, time constraints, struggles over space, and conflicts between MIRs' educational and care-plan-development functions all prevented teams from achieving collaboration and patient-involvement. Moreover, physicians' de facto control of rounds often meant that they resembled medical rounds (their historical predecessors), and sidelined other providers' contributions. This study suggests that the MIRs model, as presently practiced, might not be well suited to the provision of team-based, patient-centered care. In the interest of interprofessional collaboration, of the optimization of clinicians' time, of high-quality medical education and of patient-centered care, further research on interprofessional rounds models is needed.

  11. Record of Decision for the Rocky Mountain Arsenal On-Post Operable Unit in southern Adams County, Commerce City, Colorado.

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This Record of Decision (ROD) presents the selected remedial action for the Rocky Mountain Arsenal (RMA) On-Post Operable Unit in southern Adams County (east of...

  12. A descriptive survey of management and operations at selected sports medicine centers in the United States.

    Science.gov (United States)

    Olsen, D

    1996-11-01

    No uniform guidelines for operations or accreditation standards for sports medicine center were available and, at the time of this study, little information on the management and operation of sports medicine centers was available in the literature. The purpose of the study was to determine the management structure and function of selected sports medicine centers in the United States. Questionnaires were mailed to 200 randomly selected centers throughout the United State from a directory of sports medicine centers published in Physician and Sportsmedicine (1992) to gather descriptive information on eight areas, including 1) general background, 2) staffing, 3) services, facilities, and equipment, 4) billing, collections, and revenue, 5) clientele, caseloads, and referrals, 6) ownership and financing, 7) school and club outreach contracts, and 8) marketing strategies and future trends. A total of 71 surveys (35.5%) were returned in the allotted time frame. Data were analyzed using ranges, means, medians, modes, and percentages. Results yielded several conclusions about sports medicine centers. Nearly all (93%) of the centers employed physical therapists; physical therapists were clinical directors at 70.2% of centers; orthopaedists were most often medical directors; rehabilitation was the most frequently offered service (93%); physical therapy produced the highest revenue; sports injuries accounted for a mean 34.5% of patients, who were mostly recreational or high school athletes between 13-60 years of age; primary shareholders were most often physical therapists or physicians; most were involved in outreach services for schools; marketing strategies primarily involved communication with referral sources; and managed care was identified most frequently as a trend affecting the future of sports medicine centers. Findings identified common aspects of sports medicine centers and may assist in establishing guidelines for operations or accreditation of sports medicine

  13. Traumatic endophthalmitis following a crane pecking injury – An unusual mode

    Directory of Open Access Journals (Sweden)

    Baskaran, Prabu

    2016-02-01

    Full Text Available Purpose: To report a case of beta-hemolytic streptococcal endophthalmitis following crane-pecking injury.Case Report: A twelve-year-old boy was brought to us by his father with history of crane beak injury in his right eye. On examination, his vision was 6/24 Snellen’s acuity. Anterior segment examination showed a full thickness two mm corneo-limbal tear at 1 o’clock with iris prolapse. Pupil showed peaking through the wound with a clear crystalline lens. There was no evidence of hypopyon in the anterior chamber and B-scan ultrasonography showed acoustically clear vitreous with an attached retina. Left eye was within normal limits. Primary corneo-limbal tear repair was performed within 24 hours from the time of presentation. Intra-operatively, the corneal surgeon noted turbid aqueous with minimal hypopyon. In view of clinical suspicion of infection, an intravitreal tap for culture was taken during the primary repair, and prophylactic intravitreal antibiotics were given. The culture report showed beta-hemolytic streptococci. Pars plana vitrectomy with intravitreal antibiotics was performed after 2 days as serial ultrasound scans showed appearance and worsening of endophthalmitis. A month after the surgery, his best corrected visual acuity improved to 6/12.Conclusion: Ocular injuries resulting from bird pecking are very rare. We treated a case of full thickness corneo-limbal tear with endophthalmitis caused by beta-hemolytic streptococci following a crane-pecking injury. We recommend that injecting intravitreal antibiotics along with primary globe repair in case of severe/contaminated injuries and early pars plana core-vitrectomy would result in better outcome like in our case.

  14. Operational Ensemble River Forecasting in the United States and Australia: Practices and Challenges

    Science.gov (United States)

    Pagano, T. C.

    2012-04-01

    Operational river forecasts have been long produced to support water resources management in the United States and Australia. These forecasts cover a range of timescales from flash flooding (e.g. minutes to hours ahead) to seasonal (e.g. months ahead) and are generated by a range of statistical (e.g. regression-based) and dynamical (e.g. rainfall-runoff) model based techniques. Forecast uncertainty is commonly estimated operationally by using an ensemble of future precipitation scenarios and/or a measure of historical model error. Retrospective ensemble forecasting and the use of reforecasts for bias-adjustment and post-processing have become popular research topics and a few successful demonstration projects exist in both countries. Practical methods of post-processing, such as ensemble dressing, have been used to improve the probabilistic reliability of forecasts. The translation of predictions of probability distributions of streamflow into temporally and spatially consistent ensemble hydrographs remains an area for further development. However, probabilistic forecast communication and use remains a stumbling block for many. Furthermore, ensemble generation and post-processing typically require completely automated systems, making it difficult for humans to contribute their expertise to the forecasting process. This talk draws on ten years of experience as an operational forecaster with the US Department of Agriculture and as a developer of short-term flood forecasting systems to support the Australian Bureau of Meteorology.

  15. Nonlinear tracking control of a 3-D overhead crane with friction and payload compensations

    OpenAIRE

    Anh-Huy Vo; Quoc-Toan Truong; Ha-Quang-Thinh Ngo; Quoc-Chi Nguyen

    2016-01-01

    In this paper, a nonlinear adaptive control of a 3D overhead crane is investigated. A dynamic model of the overhead crane was developed, where the crane system is assumed as a lumped mass model. Under the mutual effects of the sway motions of the payload and the hoisting motion, the nonlinear behavior of the crane system is considered. A nonlinear control model-based scheme was designed to achieve the three objectives: (i) drive the crane system to the desired positions, (ii) suppresses the v...

  16. A Formula for the Units to Satisfy an Operation's Desired Rate of Return in CVP Analysis--A Conceptual Approach

    Science.gov (United States)

    Anderson, Johann A.; Leese, Wallace R.

    2016-01-01

    A common formula presented in many managerial- and cost-accounting textbooks makes possible the determination of the quantity of units which must be produced and sold to generate a desired dollar-amount of operating income. This article addresses the question "What formula can be used to determine the quantity of units needed to yield a…

  17. 40 CFR Table 6 to Subpart Ppp of... - Process Vents From Continuous Unit Operations-Monitoring, Recordkeeping, and Reporting Requirements

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Process Vents From Continuous Unit Operations-Monitoring, Recordkeeping, and Reporting Requirements 6 Table 6 to Subpart PPP of Part 63... Subpart PPP of Part 63—Process Vents From Continuous Unit Operations—Monitoring, Recordkeeping, and...

  18. 40 CFR 60.1690 - What are the operating practice requirements for my municipal waste combustion unit?

    Science.gov (United States)

    2010-07-01

    ... requirements for my municipal waste combustion unit? 60.1690 Section 60.1690 Protection of Environment... SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion Units Constructed on or Before August 30, 1999 Model Rule-Good Combustion Practices: Operating Requirements § 60.1690 What...

  19. Using Stephen Crane's "Maggie" To Teach the Progressive Era.

    Science.gov (United States)

    Gerwin, David; Manolios, Vassilios; Popodopoulos, Lia

    1999-01-01

    Outlines a lesson plan designed for an eleventh-grade U.S. history class in which the students learn about the Progressive Era by reading Stephen Crane's "Maggie: A Girl of the Streets." Explains that students analyze point of view, role play a talk show, write an essay, and complete a long-term research project. (CMK)

  20. Whooping crane stopover site use intensity within the Great Plains

    Science.gov (United States)

    Pearse, Aaron T.; Brandt, David A.; Harrell, Wade C.; Metzger, Kristine L.; Baasch, David M.; Hefley, Trevor J.

    2015-09-23

    Whooping cranes (Grus americana) of the Aransas-Wood Buffalo population migrate twice each year through the Great Plains in North America. Recovery activities for this endangered species include providing adequate places to stop and rest during migration, which are generally referred to as stopover sites. To assist in recovery efforts, initial estimates of stopover site use intensity are presented, which provide opportunity to identify areas across the migration range used more intensively by whooping cranes. We used location data acquired from 58 unique individuals fitted with platform transmitting terminals that collected global position system locations. Radio-tagged birds provided 2,158 stopover sites over 10 migrations and 5 years (2010–14). Using a grid-based approach, we identified 1,095 20-square-kilometer grid cells that contained stopover sites. We categorized occupied grid cells based on density of stopover sites and the amount of time cranes spent in the area. This assessment resulted in four categories of stopover site use: unoccupied, low intensity, core intensity, and extended-use core intensity. Although provisional, this evaluation of stopover site use intensity offers the U.S. Fish and Wildlife Service and partners a tool to identify landscapes that may be of greater conservation significance to migrating whooping cranes. Initially, the tool will be used by the U.S. Fish and Wildlife Service and other interested parties in evaluating the Great Plains Wind Energy Habitat Conservation Plan.

  1. 29 CFR 1910.180 - Crawler locomotive and truck cranes.

    Science.gov (United States)

    2010-07-01

    ..., mounted on a base or car equipped for travel on railroad track. It may be self-propelled or propelled by... angle indicator (boom) is an accessory which measures the angle of the boom to the horizontal. (9) The... as a car, truck, crawlers, or wheel platform. (13) The boom (crane) is a member hinged to the front...

  2. Safety of West Nile Virus vaccines in sandhill crane chicks

    Science.gov (United States)

    Olsen, G.H.; Miller, K.J.; Docherty, D.E.; Bochsler, V.S.; Folk, Martin J.; Nesbitt, Stephen A.

    2008-01-01

    West Nile virus arrived in North America in 1999 and has spread across the continent in the ensuing years. The virus has proven deadly to a variety of native avian species including sandhill cranes (Grus canadensis). In order to provide safe and efficacious protection for captive and released populations of whooping cranes (G. americana), we have conducted a series of four research projects. The last of these was a study of the effects of two different West Nile virus vaccines on young Florida sandhill crane (G. c. pratensis) chicks and subsequent challenge with the virus. We found that vaccinating crane chicks as early as day 7 post-hatch caused no adverse reactions or noticeable morbidity. We tested both a commercial equine vaccine West Nile - Innovator (Fort Dodge Laboratories, Fort Dodge, Iowa) and a new recombinant DNA vaccine (Centers for Disease Control). We had a 33% mortality in control chicks (n =6) from West Nile virus infection, versus 0% mortality in two groups of vaccinated chicks (n = 12), indicating the two vaccines tested were not only safe but effective in preventing West Nile virus.

  3. Anti-Swing Control of Gantry and Tower Cranes Using Fuzzy and Time-Delayed Feedback with Friction Compensation

    Directory of Open Access Journals (Sweden)

    H.M. Omar

    2005-01-01

    Full Text Available We designed a feedback controller to automate crane operations by controlling the load position and its swing. First, a PD tracking controller is designed to follow a prescribed trajectory. Then, another controller is added to the control loop to damp the load swing. The anti-swing controller is designed based on two techniques: a time-delayed feedback of the load swing angle and an anti-swing fuzzy logic controller (FLC. The rules of the FLC are generated by mapping the performance of the time-delayed feedback controller. The same mapping method used for generating the rules can be applied to mimic the performance of an expert operator. The control algorithms were designed for gantry cranes and then extended to tower cranes by considering the coupling between the translational and rotational motions. Experimental results show that the controller is effective in reducing load oscillations and transferring the load in a reasonable time. To experimentally validate the theory, we had to compensate for friction. To this end, we estimated the friction and then applied a control action to cancel it. The friction force was estimated by assuming a mathematical model and then estimating the model coefficients using an off-line identification technique, the method of least squares (LS.

  4. The United Nations Standing Force a Qualitative Analysis of Strategic and Operational Options for the United States

    Science.gov (United States)

    1993-06-01

    Council, has done .ch community...But, as much as the United Nations has done, it can do much more." Chaiaiing Times As the Bob Dylan song goes, "The...to our nation’s defense well into the twenty-first century. When Bob Dylan’s song was popular, it was also relevant. At that time, the United States

  5. The Motion Planning of Overhead Crane Based on Suppressing Payload Residual Swing

    Directory of Open Access Journals (Sweden)

    Liu Hua-sen

    2016-01-01

    Full Text Available Since the overhead crane system is subject to under actuation system due to that overhead crane and payload are connected by flexibility wire rope. The payload generates residual swing when the overhead crane is accelerating/ decelerating the motions. This may cause trouble for the payload precise positioning and motion planning. Hence, an optimization input shaping control method is presented to reduce the under actuated overhead crane’s payload swing caused via the inertia force. The dynamic model of the overhead crane is proposed according to the physics structure of the crane. The input shaper based on the motion planning of the crane is used as the feed forward input to suppress payload residual swing. Simulation and experiment results indicate that the ZV input shaper and ZVD input shaper can reduce the payload swing of the overhead crane.

  6. Nonlinear tracking control of a 3-D overhead crane with friction and payload compensations

    Directory of Open Access Journals (Sweden)

    Anh-Huy Vo

    2016-07-01

    Full Text Available In this paper, a nonlinear adaptive control of a 3D overhead crane is investigated. A dynamic model of the overhead crane was developed, where the crane system is assumed as a lumped mass model. Under the mutual effects of the sway motions of the payload and the hoisting motion, the nonlinear behavior of the crane system is considered. A nonlinear control model-based scheme was designed to achieve the three objectives: (i drive the crane system to the desired positions, (ii suppresses the vibrations of the payload, and (iii velocity tracking of hoisting motion. The nonlinear control scheme employs adaptation laws that estimate unknown system parameters, friction forces and the mass of the payload. The estimated values were used to compute control forces applied to the trolley of the crane. The asymptotic stability of the crane system is investigated by using the Lyapunov method. The effectiveness of the proposed control scheme is verified by numerical simulation results.

  7. [Genetic passportization and identification of Siberian cranes (Grus leucogeranus Pallas) in captivity].

    Science.gov (United States)

    Mudrik, E A; Kashentseva, T A; Gamburg, E A; Politov, D V

    2014-01-01

    The genetic diversity of the founders of an artificial population of the Siberian crane Grus leucogeranus Pallas (rare species of cranes) was characterized using 10 microsatellite loci. It was established that the allelic diversity (on average, 5.9 alleles per locus) and genic (H(o) = 0.739) diversity of the Siberian crane is rather high and comparable with the estimations for natural populations of different crane species. Genetic passportization of the birds (119 individuals) from the register of the Siberian crane International Studbook was carried out at the initial stage. The efficiency of genetic passportization for individual identification, identification of the origin, paternity analysis, and exclusion of inbreeding was demonstrated in Siberian cranes under natural mating and artificial insemination. Cases of natural reproduction in pairs of Siberian cranes imprinted to the human and continuous storage of spermatozoa in the female reproductive ducts were registered.

  8. Cost-effectiveness analysis of sandhill crane habitat management

    Science.gov (United States)

    Kessler, Andrew C.; Merchant, James W.; Shultz, Steven D.; Allen, Craig R.

    2013-01-01

    Invasive species often threaten native wildlife populations and strain the budgets of agencies charged with wildlife management. We demonstrate the potential of cost-effectiveness analysis to improve the efficiency and value of efforts to enhance sandhill crane (Grus canadensis) roosting habitat. We focus on the central Platte River in Nebraska (USA), a region of international ecological importance for migrating avian species including sandhill cranes. Cost-effectiveness analysis is a valuation process designed to compare alternative actions based on the cost of achieving a pre-determined objective. We estimated costs for removal of invasive vegetation using geographic information system simulations and calculated benefits as the increase in area of sandhill crane roosting habitat. We generated cost effectiveness values for removing invasive vegetation on 7 land parcels and for the entire central Platte River to compare the cost-effectiveness of management at specific sites and for the central Platte River landscape. Median cost effectiveness values for the 7 land parcels evaluated suggest that costs for creating 1 additional hectare of sandhill crane roosting habitat totaled US $1,595. By contrast, we found that creating an additional hectare of sandhill crane roosting habitat could cost as much as US $12,010 for some areas in the central Platte River, indicating substantial cost savings can be achieved by using a cost effectiveness analysis to target specific land parcels for management. Cost-effectiveness analysis, used in conjunction with geographic information systems, can provide decision-makers with a new tool for identifying the most economically efficient allocation of resources to achieve habitat management goals.

  9. Evaluation of the operational efficiency of pacifying police units in the state of Rio de Janeiro

    Directory of Open Access Journals (Sweden)

    Igor Rosa Dias de Jesus

    2014-05-01

    Full Text Available The Pacification Police Unit (UPP is a new model for public security and policing, aimed at ensuring local security and, above all, reduce, or even, extinguish violent crime linked to drug trafficking, and approach people and police. The purpose of this article is measuring the operational efficiency of all UPPs installed in the state of Rio de Janeiro by the beginning of 2011 by Data Envelopment Analysis (DEA. For this, it was used the CCR model – input-oriented – developed by Charnes, Cooper and Rhodes, which allows an objective assessment of the overall efficiency, identifying the sources of inefficiencies and the needed targets to achieve the efficiency in each UPP. The results converge to a reduction of the amount of policemen in all communities out of the efficiency frontier.

  10. Technical work plan for Surface Impoundments Operable Unit engineering support studies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This document provides a comprehensive work plan which, when utilized as a data collection guide for field activities, will provide the necessary information required to complete a report on geotechnical properties of the sediments contained in the Surface Impoundments Operable Unit at Oak Ridge National Laboratory in Oak Ridge, Tennessee. Detailed guidance is provided for the following activities: collection of samples from the impoundments; compressive strength testing of the raw sediments; compressive strength testing of the structurally modified (lime and cement additives) sediments; testing for sediment physical properties and settling rates; testing for sediment dewatering characteristics; testing for radiation activity during the field work; testing for polymer additions that may enhance settling. The work plan additionally provides guidance and examples for the preparation of documents necessary to establish readiness for safe and satisfactory performance of the field activities. An outline for the format requested for a report of these data is also provided.

  11. 100-OL-1 Operable Unit Field Portable X-Ray Fluorescence (XRF) Analyzer Pilot Study Plans

    Energy Technology Data Exchange (ETDEWEB)

    Bunn, Amoret L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fritz, Brad G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wellman, Dawn M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-07-01

    A pilot study is being conducted to support the approval of the Remedial Investigation/Feasibility Study (RI/FS) Work Plan to evaluate the 100-OL-1 Operable Unit (OU) pre-Hanford orchard lands. Based on comments received by the U.S. Environmental Protection Agency (EPA) and Washington State Department of Ecology, the pilot study will evaluate the use of field portable X-ray fluorescence (XRF) spectrometry measurements for evaluating lead and arsenic concentrations on the soil surface as an indicator of past use of lead arsenate pesticide residue in the OU. The work will be performed in the field during the summer of 2014, and assist in the planning for the characterization activities in the RI/FS.

  12. Eielson Air Force Base operable unit 2 and other areas record of decision

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, R.E.; Smith, R.M.

    1994-10-01

    This decision document presents the selected remedial actions and no action decisions for Operable Unit 2 (OU2) at Eielson Air Force Base (AFB), Alaska, chosen in accordance with state and federal regulations. This document also presents the decision that no further action is required for 21 other source areas at Eielson AFB. This decision is based on the administrative record file for this site. OU2 addresses sites contaminated by leaks and spills of fuels. Soils contaminated with petroleum products occur at or near the source of contamination. Contaminated subsurface soil and groundwater occur in plumes on the top of a shallow groundwater table that fluctuates seasonally. These sites pose a risk to human health and the environment because of ingestion, inhalation, and dermal contact with contaminated groundwater. The purpose of this response is to prevent current or future exposure to the contaminated groundwater, to reduce further contaminant migration into the groundwater, and to remediate groundwater.

  13. Designing User Interfaces for Smart-Applications for Operating Rooms and Intensive Care Units

    Science.gov (United States)

    Kindsmüller, Martin Christof; Haar, Maral; Schulz, Hannes; Herczeg, Michael

    Today’s physicians and nurses working in operating rooms and intensive care units have to deal with an ever increasing amount of data. More and more medical devices are delivering information, which has to be perceived and interpreted in regard to patient status and the necessity to adjust therapy. The combination of high information load and insufficient usability creates a severe challenge for the health personnel with respect to proper monitoring of these devices respective to acknowledging alarms and timely reaction to critical incidents. Smart Applications are a new kind of decision support systems that incorporate medical expertise in order to help health personnel in regard to diagnosis and therapy. By means of a User Centered Design process of two Smart Applications (anaesthesia monitor display, diagnosis display), we illustrate which approach should be followed and which processes and methods have been successfully applied in fostering the design of usable medical devices.

  14. Performance of ESPs operating downstream from spray-drying desulphurisation units

    Energy Technology Data Exchange (ETDEWEB)

    Ollero, P.; Canadas, L.; Salvador, L. [Escuela Superior de Ingenieros Industrials, Sevilla (Spain)] [and others

    1995-06-01

    This paper summarizes data from a Spray Dryer/ESP pilot plant located at the Los Barrios Coal Power Plant (Cadiz, Spain). A series of tests has been conducted to evaluate the performance of an existing ESP operating downstream from a spray dryer in a retrofit application. A factorial design of experiments with two SO{sub 2} levels, two flyash load levels, three Ca/S ratios and three sulfur removal efficiencies, was run during a six-month experimental programme. A global and a field-by-field analysis of the performance of the pilot ESP has shown that the desulphurisation unit enhances ESP efficiency and reduces the emission level. No evidence of electrical dust reentrainment has been found.

  15. Analysis of hot spots in boilers of organic Rankine cycle units during transient operation

    DEFF Research Database (Denmark)

    Benato, A.; Kærn, Martin Ryhl; Pierobon, Leonardo

    2015-01-01

    This paper is devoted to the investigation of critical dynamic events causing thermochemical decompositionof the working fluid in organic Rankine cycle power systems. The case study is the plant of an oiland gas platform where one of the three gas turbines is combined with an organic Rankine cycle...... unit toincrease the overall energy conversion efficiency.The dynamic model of the plant is coupled with a one-dimensional model of the once-through boilerfed by the exhaust thermal power of the gas turbine. The heat exchanger model uses a distributedcross-flow physical topology and local correlations...... and fluid decomposition. It is demonstrated thatthe use of a spray attemperator can mitigate the problems of local overheating of the organic compound.As a practical consequence, this paper provides guidelines for safe and reliable operation of organicRankine cycle power modules on offshore installations....

  16. Development and Evaluation of the Habitat Demonstration Unit Medical Operations Workstation and Opportunities for Future Research

    Science.gov (United States)

    Howard, Robert L., Jr.

    2012-01-01

    As NASA develops missions to leave Earth orbit and explore distant destinations (Mars, Moon, Asteroids) it is necessary to rethink human spaceflight paradigms in the life sciences. Standards developed for low earth orbit human spaceflight may not be fully applicable and in-space research may be required to develop new standards. Preventative and emergency medical care may require new capabilities never before used in space. Due to spacecraft volume limitations, this work area may also be shared with various animal and plant life science research. This paper explores the prototype Medical Operations Workstation within the NASA Habitat Demonstration Unit and discusses some of the lessons learned from field analogue missions involving the workstation. Keywords: Exploration, medical, health, crew, injury emergency, biology, animal, plant, science, preventative, emergency.

  17. Thermo-physical performance prediction of the KSC Ground Operation Demonstration Unit for liquid hydrogen

    Science.gov (United States)

    Baik, J. H.; Notardonato, W. U.; Karng, S. W.; Oh, I.

    2015-12-01

    NASA Kennedy Space Center (KSC) researchers have been working on enhanced and modernized cryogenic liquid propellant handling techniques to reduce life cycle costs of propellant management system for the unique KSC application. The KSC Ground Operation Demonstration Unit (GODU) for liquid hydrogen (LH2) plans to demonstrate integrated refrigeration, zero-loss flexible term storage of LH2, and densified hydrogen handling techniques. The Florida Solar Energy Center (FSEC) has partnered with the KSC researchers to develop thermal performance prediction model of the GODU for LH2. The model includes integrated refrigeration cooling performance, thermal losses in the tank and distribution lines, transient system characteristics during chilling and loading, and long term steady-state propellant storage. This paper will discuss recent experimental data of the GODU for LH2 system and modeling results.

  18. Experience of operation of the gas turbine units in Russky Island

    Directory of Open Access Journals (Sweden)

    Bibikov Dmitry

    2017-01-01

    Full Text Available In the present article, the heat and power supply system based on the distributed cogeneration and created as part of the APEC Summit and development of the southern Far East is considered. A brief review of the experience of operating the gas turbine units of the Co-generation plant in the Russky Island is given. The output of the heat energy over 2015 reached 142.228 thousands Gcal which is larger than that in 2014 by 18.8 %. The specific reference fuel consumption for electric supply was 272.4 g/(kW*h while for heat supply – 195.8 kg/Gcal. In spite of partial load of the stations with regard to electric and heat energy (volumes of consumptions by the connected consumers is less than designed loads, the indices of reference fuel consumption suggest the efficiency of the generation equipment of co-generation plant.

  19. 77 FR 50541 - STP Nuclear Operating Company, South Texas Project, Units 1 and 2; Application for Amendment to...

    Science.gov (United States)

    2012-08-21

    ... COMMISSION STP Nuclear Operating Company, South Texas Project, Units 1 and 2; Application for Amendment to... of STP Nuclear Operating Company (the licensee) to withdraw its application dated June 2, 2011 (ADAMS... ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please contact the NRC's Public Document...

  20. 78 FR 45987 - Vogtle Electric Generating Station, Units 3 and 4; Southern Nuclear Operating Company; Change to...

    Science.gov (United States)

    2013-07-30

    ... COMMISSION Vogtle Electric Generating Station, Units 3 and 4; Southern Nuclear Operating Company; Change to... COLs were issued to Southern Nuclear Operating Company, Inc., and Georgia Power Company, Oglethorpe... Search.'' For problems with ADAMS, please contact the NRC's Public Document Room (PDR) reference staff...

  1. 78 FR 45989 - Vogtle Electric Generating Station, Units 3 and 4; Southern Nuclear Operating Company; Change to...

    Science.gov (United States)

    2013-07-30

    ... COMMISSION Vogtle Electric Generating Station, Units 3 and 4; Southern Nuclear Operating Company; Change to... COLs were issued to Southern Nuclear Operating Company, Inc., and Georgia Power Company, Oglethorpe..., select ``ADAMS Public Documents'' and then select ``Begin Web-based ADAMS Search.'' For problems...

  2. Operation planning studies for the integration of the 60 Hz Itaipu units in the Brazilian interconnected system

    Energy Technology Data Exchange (ETDEWEB)

    Chipp, H.J.; Oliveira, J.C.C. [ELETROBRAS, Rio de Janeiro, RJ (Brazil); Correa, L.R.A. [FURNAS, Rio de Janeiro, RJ (Brazil); Mendonca, W.C.; Marchi, R.D. [Itaipu Binacional, Foz do Iguacu, PR (Brazil); Botelho, M.J. [ELETROSUL, Curitiba, PR (Brazil)

    1987-12-31

    This paper describes the operation planning studies necessary to interconnect the first two 60 Hz generator units of the Itaipu power plant to the Brazilian interconnected system. The criteria, main problems identified and operative solutions encountered are presented in this paper. 10 refs., 4 figs., 5 tabs.

  3. 78 FR 37584 - U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United...

    Science.gov (United States)

    2013-06-21

    ... Employment and Training Administration U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United States Steel Corporation, Mckeesport, Pennsylvania; Notice of Amended... workers of U.S. Steel Tubular Products, McKeesport Tubular Operations Division, a subsidiary of...

  4. Ecological consistency of SSU rRNA-based operational taxonomic units at a global scale.

    Directory of Open Access Journals (Sweden)

    Thomas S B Schmidt

    2014-04-01

    Full Text Available Operational Taxonomic Units (OTUs, usually defined as clusters of similar 16S/18S rRNA sequences, are the most widely used basic diversity units in large-scale characterizations of microbial communities. However, it remains unclear how well the various proposed OTU clustering algorithms approximate 'true' microbial taxa. Here, we explore the ecological consistency of OTUs--based on the assumption that, like true microbial taxa, they should show measurable habitat preferences (niche conservatism. In a global and comprehensive survey of available microbial sequence data, we systematically parse sequence annotations to obtain broad ecological descriptions of sampling sites. Based on these, we observe that sequence-based microbial OTUs generally show high levels of ecological consistency. However, different OTU clustering methods result in marked differences in the strength of this signal. Assuming that ecological consistency can serve as an objective external benchmark for cluster quality, we conclude that hierarchical complete linkage clustering, which provided the most ecologically consistent partitions, should be the default choice for OTU clustering. To our knowledge, this is the first approach to assess cluster quality using an external, biologically meaningful parameter as a benchmark, on a global scale.

  5. Simulation of operational processes in hospital emergency units as lean healthcare tool

    Directory of Open Access Journals (Sweden)

    Andreia Macedo Gomes

    2017-07-01

    Full Text Available Recently, the Lean philosophy is gaining importance due to a competitive environment, which increases the need to reduce costs. Lean practices and tools have been applied to manufacturing, services, supply chain, startups and, the next frontier is healthcare. Most lean techniques can be easily adapted to health organizations. Therefore, this paper intends to summarize Lean practices and tools that are already being applied in health organizations. Among the numerous techniques and lean tools used, this research highlights the Simulation. Therefore, in order to understand the use of Simulation as a Lean Healthcare tool, this research aims to analyze, through the simulation technique, the operational dynamics of the service process of a fictitious hospital emergency unit. Initially a systematic review of the literature on the practices and tools of Lean Healthcare was carried out, in order to identify the main techniques practiced. The research highlighted Simulation as the sixth most cited tool in the literature. Subsequently, a simulation of a service model of an emergency unit was performed through the Arena software. As a main result, it can be highlighted that the attendants of the built model presented a degree of idleness, thus, they are able to atend a greater demand. As a last conclusion, it was verified that the emergency room is the process with longer service time and greater overload.

  6. Emergy Evaluation of Dwelling Operation in Five Housing Units of Montreal Island, Canada

    Directory of Open Access Journals (Sweden)

    Ricardo Enrique Vega-Azamar

    2017-04-01

    Full Text Available Sustainability of cities and the environmental implications of high resource utilization by the domestic sector are growing concerns related to urban regions. Well-informed urban planning decision-making is an essential tool to help in the task and, for that, an important point to consider is the influence of parameters like residential density and housing typology on the intensity of resource utilization. Emergy synthesis, a life-cycle energy analysis methodological approach that considers the interaction of natural and human-made flows, was used to evaluate the environmental support for dwelling operational stage in five typical present-day housing units on the island of Montreal. As expected, resource utilization, measured as total emergy used, was positively correlated to housing unit size both with respect to number of occupants and dwelling size. Results suggest that variables affecting notably the intensity of resource utilization are per household income and per dweller habitable space and, while a higher income increased per capita emergy in all cases, increasing space availability per resident did not result in a decrease of empower density after 50 m2/person. Future work should consider lower and higher densities and analyses at the scale of blocks, neighborhoods and urban planning zones.

  7. Limited field investigation report for the 100-HR-1 Operable Unit

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This limited field investigation (LFI) report summarizes the data collection and analysis activities conducted during the 100-HR-1 Source Operable Unit LFI and the associated qualitative risk assessment (QRA) (WHC 1993a), and makes recommendations on the continued candidacy of high-priority sites for interim remedial measures (IRM). The results and recommendations presented in this report are generally independent of future land use scenarios. A LFI Report is required, in accordance with the HPPS, when waste sites are to be considered for IRMs. The LFI is an integral part of the remedial investigation/feasibility study (RI/FS) or Resource Conservation and Recovery Act (RCRA) facility investigation/corrective measures study (RFI/CMS) and process and functions as a focused RI or RFI for selection of IRMs. The purpose of the report is to identify those sites that are recommended to remain as candidates for IRMs, provide a preliminary summary of site characterization studies, refine the conceptual model as needed, identify contaminant- and location-specific applicable or relevant and appropriate requirements (ARA), and provide a qualitative assessment of the risks associated with the sites. This assessment includes consideration of whether contaminant concentrations pose an unacceptable risk that warrants action through IRMs. The 100-HR-1 unit encompasses approximately 100 acres adjacent to the Columbia River shoreline. It contains waste units associated with the original plant facilities constructed to support the H Reactor. The area also contains evaporation basins which received liquid process wastes and nonroutine deposits of chemical wastes from the 300 Area, where fuel elements for the N Reactor were produced.

  8. Can a stepwise steady flow computational fluid dynamics model reproduce unsteady particulate matter separation for common unit operations?

    Science.gov (United States)

    Pathapati, Subbu-Srikanth; Sansalone, John J

    2011-07-01

    Computational fluid dynamics (CFD) is emerging as a model for resolving the fate of particulate matter (PM) by unit operations subject to rainfall-runoff loadings. However, compared to steady flow CFD models, there are greater computational requirements for unsteady hydrodynamics and PM loading models. Therefore this study examines if integrating a stepwise steady flow CFD model can reproduce PM separation by common unit operations loaded by unsteady flow and PM loadings, thereby reducing computational effort. Utilizing monitored unit operation data from unsteady events as a metric, this study compares the two CFD modeling approaches for a hydrodynamic separator (HS), a primary clarifier (PC) tank, and a volumetric clarifying filtration system (VCF). Results indicate that while unsteady CFD models reproduce PM separation of each unit operation, stepwise steady CFD models result in significant deviation for HS and PC models as compared to monitored data; overestimating the physical size requirements of each unit required to reproduce monitored PM separation results. In contrast, the stepwise steady flow approach reproduces PM separation by the VCF, a combined gravitational sedimentation and media filtration unit operation that provides attenuation of turbulent energy and flow velocity.

  9. China's first home-made large ethylene unit put into operation in Daqing%China's first home-made large ethylene unit put into operation in Daqing

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    On October 5, the newly built 600kt/a ethylene unit at Daqing Petrochemical, a key part of the company's 1.2Mt/a ethylene expansion/upgrading project, turned out qualified products, indicating the successful industrialization of the packaged technology for China's first home-made large ethylene unit. This enables China to be independent from importing technologies for ethylene production which lasted for halfa century.

  10. Remedial investigation/feasibility study report for Lower Watts Bar Reservoir Operable Unit

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This document is the combined Remedial Investigation and Feasibility Study Report for the lower Watts Bar Reservoir (LWBR) Operable Unit (OU). The LWBR is located in Roane, Rhea, and Meigs counties, Tennessee, and consists of Watts Bar Reservoir downstream of the Clinch river. This area has received hazardous substances released over a period of 50 years from the US Department of Energy`s Oak Ridge Reservation (ORR), a National Priority List site established under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). As required by this law, the ORR and all off-site areas that have received contaminants, including LWBR, must be investigated to determine the risk to human health and the environment resulting from these releases, the need for any remedial action to reduce these risks, and the remedial actions that are most feasible for implementation in this OU. Contaminants from the ORR are primarily transported to the LWBR via the Clinch River. There is little data regarding the quantities of most contaminants potentially released from the ORR to the Clinch River, particularly for the early years of ORR operations. Estimates of the quantities released during this period are available for most radionuclides and some inorganic contaminants, indicating that releases 30 to 50 years ago were much higher than today. Since the early 1970s, the release of potential contaminants has been monitored for compliance with environmental law and reported in the annual environmental monitoring reports for the ORR.

  11. Some assembly required: constructing the elementary units of store-operated Ca2+ entry.

    Science.gov (United States)

    Wu, Minnie M; Luik, Riina M; Lewis, Richard S

    2007-08-01

    The means by which Ca(2+) store depletion evokes the opening of store-operated Ca(2+) channels (SOCs) in the plasma membrane of excitable and non-excitable cells has been a longstanding mystery. Indirect evidence has supported local interactions between the ER and SOCs as well as long-range interactions mediated through a diffusible activator. The recent molecular identification of the ER Ca(2+) sensor (STIM1) and a subunit of the CRAC channel (Orai1), a prototypic SOC, has now made it possible to visualize directly the sequence of events that links store depletion to CRAC channel opening. Following store depletion, STIM1 moves from locations throughout the ER to accumulate in ER subregions positioned within 10-25nm of the plasma membrane. Simultaneously, Orai1 gathers at discrete sites in the plasma membrane directly opposite STIM1, resulting in local CRAC channel activation. These new studies define the elementary units of store-operated Ca(2+) entry, and reveal an unprecedented mechanism for channel activation in which the stimulus brings a channel and its activator/sensor together for interaction across apposed membrane compartments. We discuss the implications of this choreographic mechanism with regard to Ca(2+) dynamics, specificity of Ca(2+) signaling, and the existence of a specialized ER subset dedicated to the control of the CRAC channel.

  12. Remedial design work plan for Lower East Fork Poplar Creek Operable Unit, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    The Remedial Design Work Plan (RDWP) for Lower East Fork Poplar Creek (EFPC) Operable Unit (OU) in Oak Ridge, Tennessee. This remedial action fits into the overall Oak Ridge Reservation (ORR) cleanup strategy by addressing contaminated floodplain soil. The objective of this remedial action is to minimize the risk to human health and the environment from contaminated soil in the Lower EFPC floodplain pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and the Federal Facility Agreement (FFA) (1992). In accordance with the FFA, a remedial investigation (RI) (DOE 1994a) and a feasibility study (DOE 1994b) were conducted to assess contamination of the Lower EFPC and propose remediation alternatives. The remedial investigation determined that the principal contaminant is mercury, which originated from releases during Y-12 Plant operations, primarily between 1953 and 1963. The recommended alternative by the feasibility study was to excavate and dispose of floodplain soils contaminated with mercury above the remedial goal option. Following the remedial investigation/feasibility study, and also in accordance with the FFA, a proposed plan was prepared to more fully describe the proposed remedy.

  13. Operable Unit 1 remedial investigation report, Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Gilmore, T.J.; Fruland, R.M.; Liikala, T.L. [and others

    1994-06-01

    This remedial investigation report for operable Unit 1 (OU-1) at Eielson Air Force Base presents data, calculations, and conclusions as to the nature and extent of surface and subsurface contamination at the eight source areas that make up OU-1. The information is based on the 1993 field investigation result and previous investigations. This report is the first in a set of three for OU-1. The other reports are the baseline risk assessment and feasibility study. The information in these reports will lead to a Record of Decision that will guide and conclude the environmental restoration effort for OU-1 at Eielson Air Force Base. The primary contaminants of concern include fuels and fuel-related contaminants (diesel; benzene, toluene, ethylbenzene, and xylene; total petroleum hydrocarbon; polycyclic aromatic hydrocarbons), maintenance-related solvents and cleaners (volatile chlorinated hydrocarbons such as trichloroothylene), polychlorinated biphenyls, and dichlorodiphenyltrichloroethane (DDT). The origins of contaminants of concern include leaks from storage tanks, drums and piping, and spills. Ongoing operations and past sitewide practices also contribute to contaminants of concern at OU-1 source areas. These include spraying mixed oil and solvent wastes on unpaved roads and aerial spraying of DDT.

  14. Two-Dimensional Simulation of Mass Transfer in Unitized Regenerative Fuel Cells under Operation Mode Switching

    Directory of Open Access Journals (Sweden)

    Lulu Wang

    2016-01-01

    Full Text Available A two-dimensional, single-phase, isothermal, multicomponent, transient model is built to investigate the transport phenomena in unitized regenerative fuel cells (URFCs under the condition of switching from the fuel cell (FC mode to the water electrolysis (WE mode. The model is coupled with an electrochemical reaction. The proton exchange membrane (PEM is selected as the solid electrolyte of the URFC. The work is motivated by the need to elucidate the complex mass transfer and electrochemical process under operation mode switching in order to improve the performance of PEM URFC. A set of governing equations, including conservation of mass, momentum, species, and charge, are considered. These equations are solved by the finite element method. The simulation results indicate the distributions of hydrogen, oxygen, water mass fraction, and electrolyte potential response to the transient phenomena via saltation under operation mode switching. The hydrogen mass fraction gradients are smaller than the oxygen mass fraction gradients. The average mass fractions of the reactants (oxygen and hydrogen and product (water exhibit evident differences between each layer in the steady state of the FC mode. By contrast, the average mass fractions of the reactant (water and products (oxygen and hydrogen exhibit only slight differences between each layer in the steady state of the WE mode. Under either the FC mode or the WE mode, the duration of the transient state is only approximately 0.2 s.

  15. Large-Scale Pumping Test Recommendations for the 200-ZP-1 Operable Unit

    Energy Technology Data Exchange (ETDEWEB)

    Spane, Frank A.

    2010-09-08

    CH2M Hill Plateau Remediation Company (CHPRC) is currently assessing aquifer characterization needs to optimize pump-and-treat remedial strategies (e.g., extraction well pumping rates, pumping schedule/design) in the 200-ZP-1 operable unit (OU), and in particular for the immediate area of the 241 TX-TY Tank Farm. Specifically, CHPRC is focusing on hydrologic characterization opportunities that may be available for newly constructed and planned ZP-1 extraction wells. These new extraction wells will be used to further refine the 3-dimensional subsurface contaminant distribution within this area and will be used in concert with other existing pump-and-treat wells to remediate the existing carbon tetrachloride contaminant plume. Currently, 14 extraction wells are actively used in the Interim Record of Decision ZP-1 pump-and-treat system for the purpose of remediating the existing carbon tetrachloride contamination in groundwater within this general area. As many as 20 new extraction wells and 17 injection wells may be installed to support final pump-and-treat operations within the OU area. It should be noted that although the report specifically refers to the 200-ZP-1 OU, the large-scale test recommendations are also applicable to the adjacent 200-UP-1 OU area. This is because of the similar hydrogeologic conditions exhibited within these two adjoining OU locations.

  16. 100-OL-1 Operable Unit Pilot Study: XRF Evaluation of Select Pre-Hanford Orchards

    Energy Technology Data Exchange (ETDEWEB)

    Bunn, Amoret L.; Fritz, Brad G.; Pulsipher, Brent A.; Gorton, Alicia M.; Bisping, Lynn E.; Brandenberger, Jill M.; Pino, Christian; Martinez, Dominique M.; Rana, Komal; Wellman, Dawn M.

    2014-11-20

    Prior to the acquisition of land by the U.S. Department of War in February 1943 and the creation of the Hanford Site, the land along the Columbia River was home to over 1000 people. Farming and orchard operations by both homesteaders and commercial organizations were prevalent. Orchard activities and the associated application of lead arsenate pesticide ceased in 1943, when residents were moved from the Hanford Site at the beginning of the Manhattan Project. Today, the residues from historical application of lead arsenate pesticide persist in some locations on the Hanford Site. In 2012, the U.S. Department of Energy, U.S. Environmental Protection Agency, and Washington State Department of Ecology established the 100-OL-1 Operable Unit (OU) through the Hanford Federal Facility Agreement and Consent Order, known as the Tri-Party Agreement. The pre-Hanford orchard lands identified as the 100-OL-1 OU are located south of the Columbia River and east of the present-day Vernita Bridge, and extend southeast to the former Hanford townsite. The discontinuous orchard lands within 100-OL-1 OU are approximately 20 km2 (5000 ac). A pilot study was conducted to support the approval of the remedial investigation/feasibility study work plan to evaluate the 100-OL-1 OU. This pilot study evaluated the use of a field portable X-ray fluorescence (XRF) analyzer for evaluating lead and arsenic concentrations on the soil surface as an indicator of lead arsenate pesticide residues in the OU. The objectives of the pilot study included evaluating a field portable XRF analyzer as the analytical method for decision making, estimating the nature and extent of lead and arsenic in surface soils in four decision units, evaluating the results for the purpose of optimizing the sampling approach implemented in the remedial investigation, and collecting information to improve the cost estimate and planning the cultural resources review for sampling activities in the remedial investigation. Based on

  17. Impact of selection of cord blood units from the United States and swiss registries on the cost of banking operations.

    Science.gov (United States)

    Bart, Thomas; Boo, Michael; Balabanova, Snejana; Fischer, Yvonne; Nicoloso, Grazia; Foeken, Lydia; Oudshoorn, Machteld; Passweg, Jakob; Tichelli, Andre; Kindler, Vincent; Kurtzberg, Joanne; Price, Thomas; Regan, Donna; Shpall, Elizabeth J; Schwabe, Rudolf

    2013-02-01

    Over the last 2 decades, cord blood (CB) has become an important source of blood stem cells. Clinical experience has shown that CB is a viable source for blood stem cells in the field of unrelated hematopoietic blood stem cell transplantation. Studies of CB units (CBUs) stored and ordered from the US (National Marrow Donor Program (NMDP) and Swiss (Swiss Blood Stem Cells (SBSQ)) CB registries were conducted to assess whether these CBUs met the needs of transplantation patients, as evidenced by units being selected for transplantation. These data were compared to international banking and selection data (Bone Marrow Donors Worldwide (BMDW), World Marrow Donor Association (WMDA)). Further analysis was conducted on whether current CB banking practices were economically viable given the units being selected from the registries for transplant. It should be mentioned that our analysis focused on usage, deliberately omitting any information about clinical outcomes of CB transplantation. A disproportionate number of units with high total nucleated cell (TNC) counts are selected, compared to the distribution of units by TNC available. Therefore, the decision to use a low threshold for banking purposes cannot be supported by economic analysis and may limit the economic viability of future public CB banking. We suggest significantly raising the TNC level used to determine a bankable unit. A level of 125 × 10(7) TNCs, maybe even 150 × 10(7) TNCs, might be a viable banking threshold. This would improve the return on inventory investments while meeting transplantation needs based on current selection criteria.

  18. Monticello Mill Tailings Site, Operable Unit lll, Annual Groundwater Report, May 2015 Through April 2016

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Jason [USDOE Office of Legacy Management (LM), Washington, DC (United States); Smith, Fred [Navarro Research and Engineering, Oak Ridge, TN (United States)

    2016-10-01

    This report provides the annual analysis of water quality restoration progress, cumulative through April 2016, for Operable Unit (OU) III, surface water and groundwater, of the U.S. Department of Energy (DOE) Office of Legacy Management (LM) Monticello Mill Tailings Site (MMTS). The MMTS is a Comprehensive Environmental Response, Compensation, and Liability Act National Priorities List site located in and near the city of Monticello, San Juan County, Utah. MMTS comprises the 110-acre site of a former uranium- and vanadium-ore-processing mill (mill site) and 1700 acres of surrounding private and municipal property. Milling operations generated 2.5 million cubic yards of waste (tailings) from 1942 to 1960. The tailings were impounded at four locations on the mill site. Inorganic constituents in the tailings drained from the impoundments to contaminate local surface water (Montezuma Creek) and groundwater in the underlying alluvial aquifer. Mill tailings dispersed by wind and water also contaminated properties surrounding and downstream of the mill site. Remedial actions to remove and isolate radiologically contaminated soil, sediment, and debris from the former mill site, Operable Unit I (OU I), and surrounding properties (OU II) were completed in 1999 with the encapsulation of the wastes in an engineered repository located on DOE property 1 mile south of the former mill site. This effectively removed the primary source of groundwater contamination; however, contamination of groundwater and surface water remains within OU III at levels that exceed water quality protection standards. Uranium is the primary contaminant of concern (COC). LM implemented monitored natural attenuation with institutional controls as the OU III remedy in 2004. Because groundwater restoration proceeded more slowly than expected and did not meet performance criteria established in the OU III Record of Decision (June 2004), LM implemented a contingency action in 2009 by an Explanation of

  19. Typhoid perforation: Post-operative Intensive Care Unit care and outcome

    Directory of Open Access Journals (Sweden)

    Mukaila Oyegbade Akinwale

    2016-01-01

    Full Text Available Background: Typhoid perforation ileitis is a serious complication of typhoid fever, a common and unfortunate health problem in a resource-poor country like Nigeria. Following bowel perforation, treatment is usually by simple closure or bowel resection and anastomosis after adequate aggressive fluid resuscitation and electrolyte correction. Postoperatively, some of these patients do require management in Intensive Care Unit (ICU on account of sepsis or septic shock and to improve survival. Patients and Methods: This is a prospective observational study in which 67 consecutive patients who had exploratory laparotomy for typhoid perforation between August 2009 and October 2012 in the main operating theatre of the University College Hospital, Ibadan, were studied. The attending anaesthetists had the freedom of choosing the appropriate anaesthetic drugs depending on the patients' clinical condition. The reason for admission into the ICU, the types of organ support required and outcomes were recorded. Results: Twenty-five patients (37.3% out of 67 required critical care. Reasons for admission among others included poor respiratory effort, hypotension, septic shock and delayed recovery from anaesthesia. Twenty-one patients (84% required mechanical ventilation with a mean duration of 2.14 days (range 1–5 days. Fourteen patients required ionotropic support and the length of ICU stay ranged from 1 to 15 days (mean 4.32 days. Nineteen patients (76% were successfully managed and discharged to the ward while 24% (6 patients mortality rate was recorded. Conclusion: This study showed high rate of post-operative ICU admission in patients with typhoid perforation with a high demand for critical care involving mechanical ventilation and ionotropic support. In centres that manage patients presenting with typhoid ileitis and perforation, post-operative critical care should be available.

  20. Typhoid perforation: Post-operative Intensive Care Unit care and outcome.

    Science.gov (United States)

    Akinwale, Mukaila Oyegbade; Sanusi, Arinola A; Adebayo, Oluwaseun K

    2016-01-01

    Typhoid perforation ileitis is a serious complication of typhoid fever, a common and unfortunate health problem in a resource-poor country like Nigeria. Following bowel perforation, treatment is usually by simple closure or bowel resection and anastomosis after adequate aggressive fluid resuscitation and electrolyte correction. Postoperatively, some of these patients do require management in Intensive Care Unit (ICU) on account of sepsis or septic shock and to improve survival. This is a prospective observational study in which 67 consecutive patients who had exploratory laparotomy for typhoid perforation between August 2009 and October 2012 in the main operating theatre of the University College Hospital, Ibadan, were studied. The attending anaesthetists had the freedom of choosing the appropriate anaesthetic drugs depending on the patients' clinical condition. The reason for admission into the ICU, the types of organ support required and outcomes were recorded. Twenty-five patients (37.3%) out of 67 required critical care. Reasons for admission among others included poor respiratory effort, hypotension, septic shock and delayed recovery from anaesthesia. Twenty-one patients (84%) required mechanical ventilation with a mean duration of 2.14 days (range 1-5 days). Fourteen patients required ionotropic support and the length of ICU stay ranged from 1 to 15 days (mean 4.32 days). Nineteen patients (76%) were successfully managed and discharged to the ward while 24% (6 patients) mortality rate was recorded. This study showed high rate of post-operative ICU admission in patients with typhoid perforation with a high demand for critical care involving mechanical ventilation and ionotropic support. In centres that manage patients presenting with typhoid ileitis and perforation, post-operative critical care should be available.

  1. Molten salt coal gasification process development unit. Phase 1. Volume 1. PDU operations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kohl, A.L.

    1980-05-01

    This report summarizes the results of a test program conducted on the Molten Salt Coal Gasification Process, which included the design, construction, and operation of a Process Development Unit. In this process, coal is gasified by contacting it with air in a turbulent pool of molten sodium carbonate. Sulfur and ash are retained in the melt, and a small stream is continuously removed from the gasifier for regeneration of sodium carbonate, removal of sulfur, and disposal of the ash. The process can handle a wide variety of feed materials, including highly caking coals, and produces a gas relatively free from tars and other impurities. The gasification step is carried out at approximately 1800/sup 0/F. The PDU was designed to process 1 ton per hour of coal at pressures up to 20 atm. It is a completely integrated facility including systems for feeding solids to the gasifier, regenerating sodium carbonate for reuse, and removing sulfur and ash in forms suitable for disposal. Five extended test runs were made. The observed product gas composition was quite close to that predicted on the basis of earlier small-scale tests and thermodynamic considerations. All plant systems were operated in an integrated manner during one of the runs. The principal problem encountered during the five test runs was maintaining a continuous flow of melt from the gasifier to the quench tank. Test data and discussions regarding plant equipment and process performance are presented. The program also included a commercial plant study which showed the process to be attractive for use in a combined-cycle, electric power plant. The report is presented in two volumes, Volume 1, PDU Operations, and Volume 2, Commercial Plant Study.

  2. FEASIBILITY STUDY REPORT FOR THE 200-ZP-1 GROUNDWATER OPERABLE UNIT

    Energy Technology Data Exchange (ETDEWEB)

    BYRNES ME

    2008-07-18

    The Hanford Site, managed by the U.S. Department of Energy (DOE), encompasses approximately 1,517 km{sup 2} (586 mi{sup 2}) in the Columbia Basin of south-central Washington State. In 1989, the U.S. Environmental Protection Agency (EPA) placed the 100, 200, 300, and 1100 Areas of the Hanford Site on the 40 Code of Federal Regulations (CFR) 300, 'National Oil and Hazardous Substances Pollution Contingency Plan' National Contingency Plan [NCPD], Appendix B, 'National Priorities List' (NPL), pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). The 200 Areas NPL sites consist of the 200 West and 200 East Areas (Figure 1-1). The 200 Areas contain waste management facilities, inactive irradiated fuel reprocessing facilities, and the 200 North Area (formerly used for interim storage and staging of irradiated fuel). Several waste sites in the 600 Area, located near the 200 Areas, also are included in the 200 Areas NPL site. The 200 Areas NPL site is in a region referred to as the 'Central Plateau' and consists of approximately 700 waste sites, excluding sites assigned to the tank farm waste management areas (WMAs). The 200-ZP-1 Groundwater Operable Unit (OU) consists of the groundwater located under the northern portion of the 200 West Area. Waste sources that contributed to the 200-ZP-1 OU included cribs and trenches that received liquid and/or solid waste in the past from the Z Plant and T Plant aggregate areas, WMA-T, WMA-TX/TY, and the State-Approved Land Disposal Site (SALDS). This feasibility study (FS) for the 200-ZP-1 Groundwater OU was prepared in accordance with the requirements of CERCLA decision documents. These decision documents are part of the Administrative Record for the selection of remedial actions for each waste site and present the selected remedial actions that are chosen in accordance with CERCLA, as amended by the Superfund Amendments and Reauthorization Act of 1986

  3. FEASIBILITY STUDY REPORT FOR THE 200-ZP-1 GROUNDWATER OPERABLE UNIT

    Energy Technology Data Exchange (ETDEWEB)

    BYRNES ME

    2008-07-18

    The Hanford Site, managed by the U.S. Department of Energy (DOE), encompasses approximately 1,517 km{sup 2} (586 mi{sup 2}) in the Columbia Basin of south-central Washington State. In 1989, the U.S. Environmental Protection Agency (EPA) placed the 100, 200, 300, and 1100 Areas of the Hanford Site on the 40 Code of Federal Regulations (CFR) 300, 'National Oil and Hazardous Substances Pollution Contingency Plan' National Contingency Plan [NCPD], Appendix B, 'National Priorities List' (NPL), pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). The 200 Areas NPL sites consist of the 200 West and 200 East Areas (Figure 1-1). The 200 Areas contain waste management facilities, inactive irradiated fuel reprocessing facilities, and the 200 North Area (formerly used for interim storage and staging of irradiated fuel). Several waste sites in the 600 Area, located near the 200 Areas, also are included in the 200 Areas NPL site. The 200 Areas NPL site is in a region referred to as the 'Central Plateau' and consists of approximately 700 waste sites, excluding sites assigned to the tank farm waste management areas (WMAs). The 200-ZP-1 Groundwater Operable Unit (OU) consists of the groundwater located under the northern portion of the 200 West Area. Waste sources that contributed to the 200-ZP-1 OU included cribs and trenches that received liquid and/or solid waste in the past from the Z Plant and T Plant aggregate areas, WMA-T, WMA-TX/TY, and the State-Approved Land Disposal Site (SALDS). This feasibility study (FS) for the 200-ZP-1 Groundwater OU was prepared in accordance with the requirements of CERCLA decision documents. These decision documents are part of the Administrative Record for the selection of remedial actions for each waste site and present the selected remedial actions that are chosen in accordance with CERCLA, as amended by the Superfund Amendments and Reauthorization Act of 1986

  4. Day-Ahead Coordination of Vehicle-to-Grid Operation and Wind Power in Security Constraints Unit Commitment (SCUC

    Directory of Open Access Journals (Sweden)

    Mohammad Javad Abdollahi

    2015-08-01

    Full Text Available In this paper security constraints unit commitment (SCUC in the presence of wind power resources and electrical vehicles to grid is presented. SCUC operation prepare an optimal time table for generation unit commitment in order to maximize security, minimize operation cost and satisfy the constraints of networks and units in a period of time, as one of the most important research interest in power systems. Today, the relationship between power network and energy storage systems is interested for many researchers and network operators. Using Electrical Vehicles (PEVs and wind power for energy production is one of the newest proposed methods for replacing fossil fuels.One of the effective strategies for analyzing of the effects of Vehicle 2 Grid (V2G and wind power in optimal operation of generation is running of SCUC for power systems that are equipped with V2G and wind power resources. In this paper, game theory method is employed for deterministic solution of day-ahead unit commitment with considering security constraints in the simultaneous presence of V2G and wind power units. This problem for two scenarios of grid-controlled mode and consumer-controlled mode in three different days with light, medium and heavy load profiles is analyzed. Simulation results show the effectiveness of the presence of V2G and wind power for decreasing of generation cost and improving operation indices of power systems.

  5. Wintering Sandhill Crane exposure to wind energy development in the central and southern Great Plains, USA

    Science.gov (United States)

    Pearse, Aaron T.; Brandt, David; Krapu, Gary

    2016-01-01

    Numerous wind energy projects have been constructed in the central and southern Great Plains, USA, the main wintering area for midcontinental Sandhill Cranes (Grus canadensis). In an initial assessment of the potential risks of wind towers to cranes, we estimated spatial overlap, investigated potential avoidance behavior, and determined the habitat associations of cranes. We used data from cranes marked with platform transmitting terminals (PTTs) with and without global positioning system (GPS) capabilities. We estimated the wintering distributions of PTT-marked cranes prior to the construction of wind towers, which we compared with current tower locations. Based on this analysis, we found 7% spatial overlap between the distributions of cranes and towers. When we looked at individually marked cranes, we found that 52% would have occurred within 10 km of a tower at some point during winter. Using data from cranes marked after tower construction, we found a potential indication of avoidance behavior, whereby GPS-marked cranes generally used areas slightly more distant from existing wind towers than would be expected by chance. Results from a habitat selection model suggested that distances between crane locations and towers may have been driven more by habitat selection than by avoidance, as most wind towers were constructed in locations not often selected by wintering cranes. Our findings of modest regional overlap and that few towers have been placed in preferred crane habitat suggest that the current distribution of wind towers may be of low risk to the continued persistence of wintering midcontinental Sandhill Cranes in the central and southern Great Plains.

  6. Commissioning and quality assurances of the Intrabeam Intra-Operative radiotherapy unit

    Directory of Open Access Journals (Sweden)

    KR Muralidhar

    2014-12-01

    Full Text Available Purpose: The authors report comprehensive commissioning and quality assurance (QA procedures for Intrabeam, Intra-Operative radiotherapy (IORT unit. The Intrabeam system miniature X-ray source is a 50 kV and 40 µA unit. Methods: The authors’ tests include measurements of output, beam deflection, isotropy, kVp and mAs measurements, quality index, isodose, reproducibility, linearity, depth dose verification, and 3D dose distribution. IC ionization chamber and the UNIDOSE dosimeter were used for the output commissioning. Probe adjuster/ionization chamber holder (PAICH was used to check the mechanical straightness of the probe. For radiation tests, NACP parallel plate chamber, Standard Imaging electrometer, 30 × 30 × 30 cm3 IAEA water phantom, solid water slabs, EDR-2 Films with RIT software, and ionization based survey meters were used. Unfors Xi platinum edition kVp meter was used to measure the kVp and mAs. Results: In mechanical QA test, X-Beam position (-0.09 mm, Y-Beam position (0.01 mm, and radial position (0.11 mm errors were within the tolerance level. Isotropy test with PDA, survey meter, ion chamber, and film measurements also produced results within the specifications. Output measurements with PAICH and external chamber measurements were matched. Beam quality, linearity, and reproducibility values were ascertained at 50KV and 40 µA and found to be within limits. Isodose, 3D dose distribution, transverse, and horizontal profiles showed the good isotropy of the source. Conclusion: The authors’ methodology provides comprehensive commissioning and calibration procedures for the Intrabeam system.

  7. Very prolonged stay in the intensive care unit after cardiac operations: early results and late survival.

    Science.gov (United States)

    Silberman, Shuli; Bitran, Daniel; Fink, Daniel; Tauber, Rachel; Merin, Ofer

    2013-07-01

    Prolonged intensive care unit (ICU) stay is a surrogate for advanced morbidity or perioperative complications, and resource utilization may become an issue. It is our policy to continue full life support in the ICU, even for patients with a seemingly grim outlook. We examined the effect of duration of ICU stay on early outcomes and late survival. Between 1993 and 2011, 6,385 patients were admitted to the ICU after cardiac surgery. Patients were grouped according to length of stay in the ICU: group 1, 2 days or less (n = 4,631; 73%); group 2, 3 to 14 days (n = 1,423; 22%); group 3, more than 14 days (n = 331; 5%). Length of stay in ICU for group 3 patients was 38 ± 24 days (range, 15 to 160; median 31). Clinical profile and outcomes were compared between groups. Patients requiring prolonged ICU stay were older, underwent more complex surgery, had greater comorbidity, and a higher predicted operative mortality (p < 0.0001). They had a higher incidence of adverse events and increased mortality (p < 0.0001). Of the 331 group 3 patients, 60% were discharged: survival of these patients at 1, 3, and 5 years was 78%, 65%, and 52%, respectively. Operative mortality as well as late survival of discharged patients was proportional to duration of ICU stay. Current technology enables keeping sick patients alive for extended periods of time. Nearly two thirds of patients requiring prolonged ICU leave hospital, and of these, 50% attain 5-year survival. These data support offering full and continued support even for patients requiring very prolonged ICU stay. Copyright © 2013 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  8. GROUDWATER REMEDIATION AT THE 100-HR-3 OPERABLE UNIT HANFORD SITE WASHINGTON USA - 11507

    Energy Technology Data Exchange (ETDEWEB)

    SMOOT JL; BIEBESHEIMER FH; ELUSKIE JA; SPILIOTOPOULOS A; TONKIN MJ; SIMPKIN T

    2011-01-12

    The 100-HR-3 Groundwater Operable Unit (OU) at the Hanford Site underlies three former plutonium production reactors and the associated infrastructure at the 100-D and 100-H Areas. The primary contaminant of concern at the site is hexavalent chromium; the secondary contaminants are strontium-90, technetium-99, tritium, uranium, and nitrate. The hexavalent chromium plume is the largest plume of its type in the state of Washington, covering an area of approximately 7 km{sup 2} (2.7 mi{sup 2}) with concentrations greater than 20 {micro}g/L. Concentrations range from 60,000 {micro}g/L near the former dichromate transfer station in the 100-D Area to large areas of 20 to 100 {micro}g/L across much of the plume area. Pump-and-treat operations began in 1997 and continued into 2010 at a limited scale of approximately 200 gal/min. Remediation of groundwater has been fairly successful in reaching remedial action objectives (RAOs) of 20 {micro}g/L over a limited region at the 100-H, but less effective at 100-D. In 2000, an in situ, permeable reactive barrier was installed downgradient of the hotspot in 100-D as a second remedy. The RAOs are still being exceeded over a large portion of the area. The CH2M HILL Plateau Remediation Company was awarded the remediation contract for groundwater in 2008 and initiated a remedial process optimization study consisting of modeling and technical studies intended to enhance the remediation. As a result of the study, 1,400 gal/min of expanded treatment capacity are being implemented. These new systems are designed to meet 2012 and 2020 target milestones for protection of the Columbia River and cleanup of the groundwater plumes.

  9. Operating room fire prevention: creating an electrosurgical unit fire safety device.

    Science.gov (United States)

    Culp, William C; Kimbrough, Bradly A; Luna, Sarah; Maguddayao, Aris J

    2014-08-01

    To reduce the incidence of surgical fires. Operating room fires represent a potentially life-threatening hazard and are triggered by the electrosurgical unit (ESU) pencil. Carbon dioxide is a fire suppressant and is a routinely used medical gas. We hypothesize that a shroud of protective carbon dioxide covering the tip of the ESU pencil displaces oxygen, thereby preventing fire ignition. Using 3-dimensional modeling techniques, a polymer sleeve was created and attached to an ESU pencil. This sleeve was connected to a carbon dioxide source and directed the gas through multiple precisely angled ports, generating a cone of fire-suppressive carbon dioxide surrounding the active pencil tip. This device was evaluated in a flammability test chamber containing 21%, 50%, and 100% oxygen with sustained ESU activation. The sleeve was tested with and without carbon dioxide (control) until a fuel was ignited or 30 seconds elapsed. Time to ignition was measured by high-speed videography. Fires were ignited with each control trial (15/15 trials). The control group median ± SD ignition time in 21% oxygen was 3.0 ± 2.4 seconds, in 50% oxygen was 0.1 ± 1.8 seconds, and in 100% oxygen was 0.03 ± 0.1 seconds. No fire was observed when the fire safety device was used in all concentrations of oxygen (0/15 trials; P fire ignition was 76% to 100%. A sleeve creating a cone of protective carbon dioxide gas enshrouding the sparks from an ESU pencil effectively prevents fire in a high-flammability model. Clinical application of this device may reduce the incidence of operating room fires.

  10. Model-Based Development of Control Systems for Forestry Cranes

    Directory of Open Access Journals (Sweden)

    Pedro La Hera

    2015-01-01

    Full Text Available Model-based methods are used in industry for prototyping concepts based on mathematical models. With our forest industry partners, we have established a model-based workflow for rapid development of motion control systems for forestry cranes. Applying this working method, we can verify control algorithms, both theoretically and practically. This paper is an example of this workflow and presents four topics related to the application of nonlinear control theory. The first topic presents the system of differential equations describing the motion dynamics. The second topic presents nonlinear control laws formulated according to sliding mode control theory. The third topic presents a procedure for model calibration and control tuning that are a prerequisite to realize experimental tests. The fourth topic presents the results of tests performed on an experimental crane specifically equipped for these tasks. Results of these studies show the advantages and disadvantages of these control algorithms, and they highlight their performance in terms of robustness and smoothness.

  11. Spherical Pendulum Small Oscillations for Slewing Crane Motion

    Science.gov (United States)

    Perig, Alexander V.; Stadnik, Alexander N.; Deriglazov, Alexander I.

    2014-01-01

    The present paper focuses on the Lagrange mechanics-based description of small oscillations of a spherical pendulum with a uniformly rotating suspension center. The analytical solution of the natural frequencies' problem has been derived for the case of uniform rotation of a crane boom. The payload paths have been found in the inertial reference frame fixed on earth and in the noninertial reference frame, which is connected with the rotating crane boom. The numerical amplitude-frequency characteristics of the relative payload motion have been found. The mechanical interpretation of the terms in Lagrange equations has been outlined. The analytical expression and numerical estimation for cable tension force have been proposed. The numerical computational results, which correlate very accurately with the experimental observations, have been shown. PMID:24526891

  12. Artificial insemination in captive Whooping Cranes: Results from genetic analyses

    Science.gov (United States)

    Jones, K.L.; Nicolich, Jane M.

    2001-01-01

    Artificial insemination has been used frequently in the captive whooping crane (Grus americana) population. In the 1980s, it was necessary at times to inseminate females with semen from several males during the breeding season or with semen from multiple males simultaneously due to unknown sperm viability of the breeding males. The goals of this study were to apply microsatellite DNA profiles to resolve uncertain paternities and to use these results to evaluate the current paternity assignment assumptions used by captive managers. Microsatellite DNA profiles were successful in resolving 20 of 23 paternity questions. When resolved paternities were coupled with data on insemination timing, substantial information was revealed on fertilization timing in captive whooping cranes. Delayed fertilization from inseminations 6+ days pre-oviposition suggests capability of sperm storage.

  13. 5-year operation experience with the 1.8 K refrigeration units of the LHC cryogenic system

    CERN Document Server

    Ferlin, G; Claudet, S; Pezzetti, M

    2015-01-01

    Since 2009, the Large Hadron Collider (LHC) is in operation at CERN. The LHC superconducting magnets distributed over eight sectors of 3.3-km long are cooled at 1.9 K in pressurized superfluid helium. The nominal operating temperature of 1.9 K is produced by eight 1.8-K refrigeration units based on centrifugal cold compressors (3 or 4 stages depending to the vendor) combined with warm volumetric screw compressors with sub-atmospheric suction. After about 5 years of continuous operation, we will present the results concerning the availability for the final user of these refrigeration units and the impact of the design choice on the recovery time after a system trip. We will also present the individual results for each rotating machinery in terms of failure origin and of Mean Time between Failure (MTBF), as well as the consolidations and upgrades applied to these refrigeration units.

  14. Operation of the counter-rotating type pump-turbine unit installed in the power stabilizing system

    Science.gov (United States)

    Kanemoto, T.; Honda, H.; Kasahara, R.; Miyaji, T.

    2014-03-01

    This serial research intends to put a unique power stabilization system with a pumped storage into practical use. The pumped storage is equipped with a counter-rotating type pump-turbine unit whose operating mode can be shifted instantaneously in response to the fluctuation of power from renewable resources. This paper verifies that the system is reasonably effective to stabilize the fluctuating power. It is necessary to quickly increase the rotational speed when the operation is shifted from the turbine to the pumping modes, because the unit cannot pump-up water from a lower reservoir at a slow rotational speed while keeping gross/geodetic head constant. The maximum hydraulic efficiency at the turbine mode is close to the efficiency of the counter-rotating type hydroelectric unit designed exclusively for the turbine mode. The system is also provided for a pilot plant to be operated in the field.

  15. Sandhill crane abundance and nesting ecology at Grays Lake, Idaho

    Science.gov (United States)

    Austin, J.E.; Henry, A.R.; Ball, I.J.

    2007-01-01

    We examined population size and factors influencing nest survival of greater sandhill cranes (Grus canadensis tabida) at Grays Lake National Wildlife Refuge, Idaho, USA, during 1997-2000. Average local population of cranes from late April to early May, 1998-2000, was 735 cranes, 34% higher than that reported for May 1970-1971. We estimated 228 (SE = 30) nests in the basin core (excluding renests), 14% higher than a 1971 estimate. Apparent nest success in our study (x?? = 60%, n = 519 nests) was lower than reported for Grays Lake 30-50 years earlier. Daily survival rates (DSRs) of all nests averaged 0.9707 (41.2%). The best model explaining nest survival included year and water depth and their interaction. Nest survival was highest (DSR = 0.9827) in 1998 compared with other years (0.9698-0.9707). Nest survival changed little relative to water depth in 1998, when flooding was extensive and alternative prey (microtines) irrupted, but declined markedly with lower water levels in 2000, the driest year studied. Hypotheses relating nest survival to vegetation height, land use (idle, summer grazing, fall grazing), and date were not supported. In a before-after-control-impact design using 12 experimental fields, nest survival differed among years but not among management treatments (idle, fall graze, fall burn, and summer-graze-idle rotation), nor was there an interaction between year and treatments. However, DSRs in fall-burn fields declined from 0.9781 in 1997-1998 to 0.9503 in 1999-2000 (posttreatment). Changes in the predator community have likely contributed to declines in nest success since the 1950s and 1970s. Our results did not support earlier concerns about effects of habitat management practices on crane productivity. Nest survival could best be enhanced by managing spring water levels. Managers should continue censuses during late April to evaluate long-term relationships to habitat conditions and management.

  16. Minimization of Load Oscillations in Travelling Mechanisms of Cranes

    Directory of Open Access Journals (Sweden)

    Kamal Khandakji

    2005-01-01

    Full Text Available The paper presents an analysis of suspended load (cargo oscillations in traveling mechanisms of cranes. A special control algorithm has been developed in order to get minimum cargo oscillations in minimum transient time. Mathematical model simulating the effect of the suggested control algorithm on cargo oscillations has been developed. Two power electronic circuits applicable for AC drives with three-phase induction motors are suggested to obtain the required motion algorithm.

  17. Data validation report for the 100-FR-3 Operable Unit, third round groundwater samples

    Energy Technology Data Exchange (ETDEWEB)

    Ayres, J.M.

    1994-03-31

    Westinghouse-Hanford has requested that a minimum of 20% of the total number of Sample Delivery Groups be validated for the 100-FR-3 operable Unit Third Round Groundwater sampling investigation. Therefore, the data from the chemical analysis of 51 samples from this sampling event and their related quality assurance samples were reviewed and validated to verify that reported sample results were of sufficient quality to support decisions regarding remedial actions performed at this site. The report is broken down into sections for each chemical analysis and radiochemical analysis type. Each section addresses the data package completeness, holding time adherence, instrument calibration and tuning acceptability, blank results, accuracy, precision, system performance, as well as the compound identification and quantitation. In addition, each section has an overall assessment and summary for the data packages reviewed for the particular chemical/radiochemical analyses. Detailed backup information is provided to the reader by SDG No. and sample number. For each data package, a matrix of chemical analyses per sample number is presented, as well as data qualification summaries.

  18. jMOTU and Taxonerator: turning DNA Barcode sequences into annotated operational taxonomic units.

    Directory of Open Access Journals (Sweden)

    Martin Jones

    Full Text Available BACKGROUND: DNA barcoding and other DNA sequence-based techniques for investigating and estimating biodiversity require explicit methods for associating individual sequences with taxa, as it is at the taxon level that biodiversity is assessed. For many projects, the bioinformatic analyses required pose problems for laboratories whose prime expertise is not in bioinformatics. User-friendly tools are required for both clustering sequences into molecular operational taxonomic units (MOTU and for associating these MOTU with known organismal taxonomies. RESULTS: Here we present jMOTU, a Java program for the analysis of DNA barcode datasets that uses an explicit, determinate algorithm to define MOTU. We demonstrate its usefulness for both individual specimen-based Sanger sequencing surveys and bulk-environment metagenetic surveys using long-read next-generation sequencing data. jMOTU is driven through a graphical user interface, and can analyse tens of thousands of sequences in a short time on a desktop computer. A companion program, Taxonerator, that adds traditional taxonomic annotation to MOTU, is also presented. Clustering and taxonomic annotation data are stored in a relational database, and are thus amenable to subsequent data mining and web presentation. CONCLUSIONS: jMOTU efficiently and robustly identifies the molecular taxa present in survey datasets, and Taxonerator decorates the MOTU with putative identifications. jMOTU and Taxonerator are freely available from http://www.nematodes.org/.

  19. An operational evaluation of the Community Oral Rehydration Units in Peru.

    Science.gov (United States)

    Benavides, B M; Jacoby, E R

    1994-12-01

    Since 1984, in Latin America donor agencies and national governments have extensively supported the implementation of the Community Oral Rehydration Units (CORUs) in an attempt to increase the access to oral rehydration therapy and improve the case management of diarrhoea at the community level. This study surveyed 40 CORUs in two regions of Peru to assess their operation, the number of patients with diarrhoea attended, and the knowledge of volunteers in charge. The results show that CORUs were mainly implemented close to existing health centres; the median of case load was 2.0 patients in the preceding month; and the volunteers' knowledge of case management was principally deficient in the diagnosis of hydration status, dietary management and in preventive measures. This lack of knowledge was replicated by professionals at the supervising health centres. Despite the fact that CORUs have been functioning for around four years, they exhibit numerous deficiencies which prevent them from fulfilling their objectives. A global review of the whole CORU strategy is called for.

  20. Qualitative research within trials: developing a standard operating procedure for a clinical trials unit

    Science.gov (United States)

    2013-01-01

    Background Qualitative research methods are increasingly used within clinical trials to address broader research questions than can be addressed by quantitative methods alone. These methods enable health professionals, service users, and other stakeholders to contribute their views and experiences to evaluation of healthcare treatments, interventions, or policies, and influence the design of trials. Qualitative data often contribute information that is better able to reform policy or influence design. Methods Health services researchers, including trialists, clinicians, and qualitative researchers, worked collaboratively to develop a comprehensive portfolio of standard operating procedures (SOPs) for the West Wales Organisation for Rigorous Trials in Health (WWORTH), a clinical trials unit (CTU) at Swansea University, which has recently achieved registration with the UK Clinical Research Collaboration (UKCRC). Although the UKCRC requires a total of 25 SOPs from registered CTUs, WWORTH chose to add an additional qualitative-methods SOP (QM-SOP). Results The qualitative methods SOP (QM-SOP) defines good practice in designing and implementing qualitative components of trials, while allowing flexibility of approach and method. Its basic principles are that: qualitative researchers should be contributors from the start of trials with qualitative potential; the qualitative component should have clear aims; and the main study publication should report on the qualitative component. Conclusions We recommend that CTUs consider developing a QM-SOP to enhance the conduct of quantitative trials by adding qualitative data and analysis. We judge that this improves the value of quantitative trials, and contributes to the future development of multi-method trials. PMID:23433341

  1. ALTERNATIVE REMEDIATION TECHNOLOGY STUDY FOR GROUNDWATER TREATMENT AT 200-PO-1 OPERABLE UNIT AT HANFORD SITE

    Energy Technology Data Exchange (ETDEWEB)

    DADO MA

    2008-07-31

    This study focuses on the remediation methods and technologies applicable for use at 200-PO-I Groundwater Operable Unit (OU) at the Hanford Site. The 200-PO-I Groundwater au requires groundwater remediation because of the existence of contaminants of potential concern (COPC). A screening was conducted on alternative technologies and methods of remediation to determine which show the most potential for remediation of groundwater contaminants. The possible technologies were screened to determine which would be suggested for further study and which were not applicable for groundwater remediation. COPCs determined by the Hanford Site groundwater monitoring were grouped into categories based on properties linking them by remediation methods applicable to each COPC group. The screening considered the following criteria. (1) Determine if the suggested method or technology can be used for the specific contaminants found in groundwater and if the technology can be applied at the 200-PO-I Groundwater au, based on physical characteristics such as geology and depth to groundwater. (2) Evaluate screened technologies based on testing and development stages, effectiveness, implementability, cost, and time. This report documents the results of an intern research project conducted by Mathew Dado for Central Plateau Remediation in the Soil and Groundwater Remediation Project. The study was conducted under the technical supervision of Gloria Cummins and management supervision of Theresa Bergman and Becky Austin.

  2. First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit

    CERN Document Server

    Antoine, A; Magnin, N; Juteau, P; Voumard, N

    2011-01-01

    Two LHC Beam Dumping Systems (LBDS) remove the counter-rotating beams safely from the collider during setting up of the accelerator, at the end of a physics run and in case of emergencies. Dump requests can come from 3 different sources: the machine protection system in emergency cases, the machine timing system for scheduled dumps or the LBDS itself in case of internal failures. These dump requests are synchronized with the 3 μs beam abort gap in a fail-safe redundant Trigger Synchronization Unit (TSU) based on a Digital Phase Locked Loop (DPLL), locked onto the LHC beam revolution frequency with a maximum phase error of 40 ns. The synchronized trigger pulses coming out of the TSU are then distributed to the high voltage generators of the beam dump kickers through a redundant fault-tolerant trigger distribution system. This paper describes the operational experience gained with the TSU since its commissioning with beam in 2009, and highlights the improvements, which have been implemented f...

  3. A Cable-Passive Damper System for Sway and Skew Motion Control of a Crane Spreader

    Directory of Open Access Journals (Sweden)

    La Duc Viet

    2015-01-01

    Full Text Available While the crane control problem is often approached by applying a certain active control command to some parts of the crane, this paper proposes a cable-passive damper system to reduce the vibration of a four-cable suspended crane spreader. The residual sway and skew motions of a crane spreader always produce the angle deflections between the crane cables and the crane spreader. The idea in this paper is to convert those deflections into energy dissipated by the viscous dampers, which connect the cables and the spreader. The proposed damper system is effective in reducing spreader sway and skew motions. Moreover, the optimal damping coefficient can be found analytically by minimizing the time integral of system energy. The numerical simulations show that the proposed passive system can assist the input shaping control of the trolley motion in reducing both sway and skew responses.

  4. Hydrological modelling for siberian crane Grus Leucogeranus stopover sites in northeast China.

    Science.gov (United States)

    Jiang, Haibo; He, Chunguang; Sheng, Lianxi; Tang, Zhanhui; Wen, Yang; Yan, Tingting; Zou, Changlin

    2015-01-01

    Habitat loss is one of the key factors underlying the decline of many waterbird species, including Siberian Crane (Grus leucogeranus), a threatened species worldwide. Wetlands are the primary stopover for many waterbirds and restoration of these wetlands involves both hydrological restoration and water resource management. To protect the stopover sites of Siberian Cranes, we collected Siberian Crane stopover numbers, meteorological and hydrological data, and remote sensing data from 2008 to 2011 in Momoge National Nature Reserve, one of the largest wetlands in northeastern China. A model was developed to estimate the suitability of Siberian Crane stopover sites. According to our results, the most suitable daily water level for Siberian Cranes between 2008 and 2012 occurred in the spring of 2008 and in the Scirpus planiculmis growing season and autumn of 2010. We suggest a season-dependent water management strategy in order to provide suitable conditions at Siberian Crane stopover sites.

  5. Hydrological modelling for siberian crane Grus Leucogeranus stopover sites in northeast China.

    Directory of Open Access Journals (Sweden)

    Haibo Jiang

    Full Text Available Habitat loss is one of the key factors underlying the decline of many waterbird species, including Siberian Crane (Grus leucogeranus, a threatened species worldwide. Wetlands are the primary stopover for many waterbirds and restoration of these wetlands involves both hydrological restoration and water resource management. To protect the stopover sites of Siberian Cranes, we collected Siberian Crane stopover numbers, meteorological and hydrological data, and remote sensing data from 2008 to 2011 in Momoge National Nature Reserve, one of the largest wetlands in northeastern China. A model was developed to estimate the suitability of Siberian Crane stopover sites. According to our results, the most suitable daily water level for Siberian Cranes between 2008 and 2012 occurred in the spring of 2008 and in the Scirpus planiculmis growing season and autumn of 2010. We suggest a season-dependent water management strategy in order to provide suitable conditions at Siberian Crane stopover sites.

  6. Micro-cogeneration units based on Stirling engine for heating and their real operation

    Science.gov (United States)

    Čierny, Jaroslav; Patsch, Marek

    2014-08-01

    This article was deal with micro-cogeneration units based on Stirling engine. We watched problematic of real working Stirling engine. The article also contain hookup of unit constructed at University of Zilina.

  7. Use of an inactivated eastern equine encephalitis virus vaccine in cranes

    Science.gov (United States)

    Carpenter, J.W.; Dein, F.J.; Clark, G.G.; Watts, D.M.; Crabbs, C.L.

    1986-01-01

    An unprecedented outbreak of fatal eastern equine encephalitis (EEE) virus occurred during the late summer and fall of 1984 in endangered whooping cranes (Grus americana) at the Patuxent Wildlife Research Center, Laurel, Maryland. As part of efforts to prevent future epizootics of EEE. studies were conducted to evaluate the antibody response of cranes following vaccination with a formalin-inactivated EEE virus vaccine. Viral specific neutralizing antibody was elicited in sandhill cranes (Grus canadensis) and whooping cranes following 1M inoculation with the vaccine. Among the 1M-inoculated cranes, peak antibody titers of 1:80 on days 30 to 60 had waned to undetectable levels by days 90 to 120. Although the initial titers were not increased by the first booster dose, the duration of the antibody was extended considerably. Whooping cranes, receiving vaccine 6 months after their first vaccination, developed titers of 1:80 to 1:320 by day 30. At 45 days after the final vaccination, these titers had dropped to 1:10 to 1:160. Cranes with preexisting EEE virus antibody, apparently reflecting natural infection, exhibited an anamnestic response indicated by a rapid increase and sustained high antibody titer. Even though EEE virus vaccine induced neutralizing antibody and produced no adverse side effects, further studies will be required to assess the significance of this response as a strategy for protecting whooping cranes against natural EEE virus infection. The loss of captive whooping cranes to the EEE virus presented a previously unrecognized risk and obstacle to recovery of this species. Not only was, there a setback in the captive breeding and reintroduction program for the whooping crane, but, because of the susceptibility of the species to the EEE virus. establishment of additional crane populations may be more complicated than initially envisioned. However, through continued surveillance, serological monitoring, and vaccination activities, we are confident that

  8. PROBABILITY OF FAILURE OF THE TRUDOCK CRANE SYSTEM AT THE WASTE ISOLATION PILOT PLANT (WIPP)

    Energy Technology Data Exchange (ETDEWEB)

    Greenfield, M.A.; Sargent, T.J.

    2000-05-01

    This probabilistic analysis of WIPP TRUDOCK crane failure is based on two sources of failure data. The source for operator errors is the report by Swain and Guttman, NUREG/CR-1278-F, August 1983. The source for crane cable hook breaks was initially made by WIPP/WID-96- 2196, Rev. O by using relatively old (1970s) U.S. Navy data (NUREG-0612). However, a helpful analysis by R.K. Deremer of PLG guided the authors to values that were more realistic and more conservative, with the recommendation that the crane cable/hook failure rate should be 2.5 x 10-6 per demand. This value was adopted and used. Based on these choices a mean failure rate of 9.70 x 10-3(1/yr) was calculated. However, a mean rate by itself does not reveal the level of confidence to be associated with this number. Guidance to making confidence calculations came from the report by Swain and Guttman, who stated that failure data could be described by lognormal distributions. This is in agreement with the widely use d reports (by DOE and others) NPRD-95 and NPRD-91, on failure data. The calculations of confidence levels showed that the mean failure rate of 9.70x 10-3(1/yr) corresponded to a percentile value of approximately 71; i.e. there is a 71% likelihood that the failure rate is less than 9.70x 10-3(1/yr). One also calculated that there is a 95% likelihood that the failure rate is less than 29.6x 10-3(1/yr). Or, as stated previously, there is a 71% likelihood that not more than one dropped load will occur in 103 years. Also, there is a 95% likelihood that not more than one dropped load will occur in approximately 34 years. It is the responsibility of DOE to select the confidence level at which it desires to operate.

  9. Changes in agriculture and abundance of snow geese affect carrying capacity of sandhill cranes in Nebraska

    Science.gov (United States)

    Pearse, A.T.; Krapu, G.L.; Brandt, D.A.; Kinzel, P.J.

    2010-01-01

    The central Platte River valley (CPRV) in Nebraska, USA, is a key spring-staging area for approximately 80 of the midcontinent population of sandhill cranes (Grus canadensis; hereafter cranes). Evidence that staging cranes acquired less lipid reserves during the 1990s compared to the late 1970s and increases in use of the CPRV by snow geese (Chen caerulescens) prompted us to investigate availability of waste corn and quantify spatial and temporal patterns of crane and waterfowl use of the region. We developed a predictive model to assess impacts of changes in availability of corn and snow goose abundance under past, present, and potential future conditions. Over a hypothetical 60-day staging period, predicted energy demand of cranes and waterfowl increased 87 between the late 1970s and 19982007, primarily because peak abundances of snow geese increased by 650,000 and cranes by 110,000. Compared to spring 1979, corn available when cranes arrived was 20 less in 1998 and 68 less in 1999; consequently, the area of cornfields required to meet crane needs increased from 14,464 ha in 1979 to 32,751 ha in 1998 and 90,559 ha in 1999. Using a pooled estimate of 88 kg/ha from springs 19981999 and 20052007, the area of cornfields needed to supply food requirements of cranes and waterfowl increased to 65,587 ha and was greatest in the eastern region of the CPRV, where an estimated 54 of cranes, 47 of Canada geese (Branta canadensis), 45 of greater white-fronted geese (Anser albifrons), and 46 of snow geese occurred during ground surveys. We estimated that a future reduction of 25 in available corn or cornfields would increase daily foraging flight distances of cranes by 2738. Crane use and ability of cranes to store lipid reserves in the CPRV could be reduced substantially if flight distance required to locate adequate corn exceeded a physiological maximum distance cranes could fly in search of food. Options to increase carrying capacity for cranes include increasing

  10. Sex Identification of Red-crowned Crane by the Polymerase Chain Reaction

    Institute of Scientific and Technical Information of China (English)

    LI Jian-hong; LI Shu-ling; BAO Jun; BAI Xiu-juan

    2004-01-01

    Sex determining gene primers of Oriental White Stork were used to amplify sex-linked gene of the Red-crowned Crane's W chromosome-specific by PCR for sex identification. The sexes of 7 couples of grown Red-crowned Cranes and 15 youngs were identified. Through DNA sequence analysis, the identity is 94.77% between Red-crowned Crane and Oriental White Stork. The results of this study suggest that the application of the polymerase chain reaction technique is practicable for determining sex in the Red-crowned Crane.

  11. Pulmonary lesions in disseminated visceral coccidiosis of sandhill and whooping cranes

    Science.gov (United States)

    Novilla, M.N.; Carpenter, J.W.; Jeffers, T.K.; White, S.L.

    1989-01-01

    Fifty cranes, consisting of 46 sandhill (Grus canadensis) and four whooping cranes (Grus americana), were studied. Eighteen sandhill cranes and the four whooping cranes were naturally infected with disseminated visceral coccidiosis (DVC). The remaining sandhill cranes were chicks experimentally infected with oocysts of Eimeria reichenowi and/or E. gruis; five chicks served as controls. There were no clinical signs attributed to respiratory infection. Necropsy of naturally infected adult birds revealed nodules in many organs, including the lung, air sacs, trachea and nares. Artificially infected sandhill cranes and the whooping crane chicks that died from DVC had congestion and consolidated areas in the lung with frothy fluid in the airways. Grossly visible nodules were observed from 10 days postinoculation. Granulomatous pneumonia and tracheitis were observed with light microscopy. Lesions were associated with merogonic and gametogonic stages of eimerian coccidia. Granulomas and granulomatous foci contained parasitized large mononuclear cells. Merogonic stages were seen in lymphoid cells by ultrastructural examination. Oocysts were observed in the trachea and bronchial mucosa and admixed with exudate in the airways, indicating that crane eimerians can complete their life cycle at these sites. Of the few eimeriid coccidia that have extraintestinal stages of development in birds and mammals, only the species in cranes complete their life cycle in both the digestive and respiratory tracts.

  12. Fusarium spp. recovered from waste peanuts associated with sandhill crane mortality

    Science.gov (United States)

    Nelson, P.E.; Cole, R.J.; Tousson, T.A.; Dorner, J.W.; Windingstad, R.M.

    1990-01-01

    Approximately 5000 sandhill cranes (Grus canadensis ) died from undetermined causes in Gains County, Texas, 1985, and an additional 200 died in 1986. Prominent clinical signs were the inability of many sick cranes to hold their necks horizontal and the neck, head, and legs sometimes drooped perpendicularly during flight. Approximately 95% of the dead cranes' gizzards contained peanuts. Culturing of peanuts, shells, soil and soil debris from fields in which sandhill cranes died showed that Fusarium species were the fungi most frequently isolated and eight species were recovered from these substrates. Fusarium compactum, F. solani , and F. equiseti were the only species recovered from all substrates cultured from both fields.

  13. Development of Teaching Materials to Foster Student Creativity by Individual Learning with Handcrafted Wire Crane

    Science.gov (United States)

    Maruyama, Naoki

    A Creative Design Seminar has been opened to 3rd-year students in mechanical engineering. The purpose of this seminar is to foster student originality and overall creativity through making things referring to familiar equipment. The students conduct an integrated operation from elaborating a plan to evaluation together with the making of a given product by themselves. The subject of this seminar is to make a Handcrafted Wire Crane which includes a special mechanical engineering feature such as a material characteristic, structure etc. The teaching method used in this seminar is based on Problem-based learning (PBL) , and pro-active student participation is required. This paper reports the gist, contents and educational effectiveness of the teaching materials. From the students' survey, they have learned about creativity, inquisitive curiosity and gained techniques, while improving their thinking. This seminar is a very effective educational tool for individual learning with teaching materials related to mechanical engineering.

  14. PI control based on fuzzy set-point weighting tracking for hydraulic crane boom system

    Institute of Scientific and Technical Information of China (English)

    Yong YANG; An LUO; Karl-Erik RYDBERG

    2006-01-01

    A PI control strategy based on fuzzy set-point weighting following was proposed for the active damping control of a hydraulic crane boom system (HCBS). Two valve-controlled PI controllers, which include a proportional feedforward controller based on fuzzy set-point weighting following and a limited semi-integrator(LSI), are designed respectively. LSI is used to limit output signal and to prevent wind up at the low frequency of the spectrum. By using a range camera and an electronic feedback control, the tip damping on the HCBS can be adjusted artificially. A collaborative control simulation technique of HOPSAN and MATLAB/SIMULINK is applied to the controller design. Simulation results show that the proposed PI control system has less overshoot as well as faster response. The tip damping on the HCBS during operation is improved.

  15. 300-FF-1 Operable Unit physical separation of soils pilot plant study

    Energy Technology Data Exchange (ETDEWEB)

    Freeman-Pollard, J.R.

    1994-01-15

    Alternative Remedial Technologies, Inc. (ART) was selected in a competitive selection process to conduct a pilot study for the physical separation of soils in the North Process Pond of the 300 Area at the Hanford Site. In January 1994, ART mobilized its 15 tons-per-hour pilot plant to the site. The plant was initially staged in a commercial area to allow for pretest inspections and minor modifications. The plant was specifically designed for use as a physical separations unit and consisted of a feed hopper, wet screens, hydrocyclones, as well as settling and dewatering equipment. The plant was supported in the field with prescreening equipment, mobile generators, air compressors, and water storage tanks. The plant was moved into the surface contamination area on March 24, 1994. The testing was conducted during the period March 23, 1994 through April 13, 1994. Two soil types were treated during the testing: a natural soil contaminated with low levels of uranium, cesium, cobalt, and heavy metals, and a natural soil contaminated with a uranium carbonate material that was visually recognizable by the presence of a green sludge material in the soil matrix. The ``green`` material contained significantly higher levels of the same contaminants. Both source materials were treated by the plant in a manner that fed the material, produced clean gravel and sand fractions, and concentrated the contaminants in a sludge cake. Process water was recycled during the operations. The testing was extremely successful in that for both source waste streams, it was demonstrated that volume reductions of greater than 90% could be achieved while also meeting the test performance criteria. The volume reduction for the natural soils averaged a 93.8%, while the ``green`` soils showed a 91.4% volume reduction.

  16. Methods to model particulate matter clarification of unit operations subject to unsteady loadings.

    Science.gov (United States)

    Spelman, David; Sansalone, John J

    2017-05-15

    Stormwater, and also wastewater unit operations (UOs) to a much lower extent, are subject to unsteady hydrodynamic and particulate matter (PM) fluxes. Simulating fully transient clarification of hetero-disperse PM requires much greater computational expense compared to steady simulations. An alternative to fully unsteady methods are stepwise steady (SS) methods which use stepwise steady flow transport and fate to approximate unsteady PM clarification of a UO during transient hydraulic loadings such as rainfall-runoff. The rationale is reduced computational effort for computational fluid dynamics (CFD) compared to simulating continuous unsteadiness of such events. An implicit solution stepwise steady (IS(3)) method is one approach which builds upon previous SS methods. The IS(3) method computes steady flows that are representative of unsteady PM transport throughout an unsteady loading. This method departs from some previous SS methods that assume PM fate can be simulated with an instantaneous clarifier (basin) influent flowrate coupled with a PM input. In this study, various SS methods were tested for basins of varying size and residence time to examine PM fate. Differences between SS methods were a function of turnover fraction indicating the role of unsteady flowrates on PM transport for larger basins of longer residence times. The breakpoint turnover fraction was between two and three. The IS(3) method best approximated unsteady behavior of larger basins. These methods identified limitations when utilizing standard event-based loading analysis for larger basins. For basins with a turnover fraction less than two, the majority of effluent PM did not originate from the event-based flow; originating from previous event loadings or existing storage. Inter- and multiple event processes and interactions, that are dependent on this inflow turnover fraction, are not accounted for by single event-based inflow models. Results suggest the use of long-term continuous

  17. Phase 1 and 2 feasibility study report for the 300-FF-1 Operable Unit

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    The 300-FF-1 Operable Unit (OU) feasibility study (FS) presented in this document completes the FS process only through the first two study phases: Phase I, Remedial Alternatives Development, and Phase II, Remedial Alternatives Screening in accordance with CERCIA guidance for performing Remedial Investigations and Feasibility Studies (RI/FS) (EPA 1988a). This Phase I/II study provides a generalized view of workable remedial technologies as applied to the site contamination problems as a whole. Phase III, Detailed Analysis of Alternatives, will be performed at a later date to further evaluate screened alternatives based on the nine criteria in the CERCLA RI/FS guidance. The purpose of this Phase I/II FS is to develop and screen a range of alternatives for remediation of contamination present in the vadose zone of the 300-FF-1 OU. The scope of work for this Phase I/II FS includes five primary tasks: 1. Review existing documents and their associated data from relevant investigations and studies; 2. Establish remedial action objectives (RAO) and general response actions (GRA); 3. Identify applicable or relevant and appropriate requirements (ARARS) pertinent to all general response actions (including waste disposal); 4. Develop remedial alternatives (Phase I) applicable to the 300-FF-1 OU including identification and screening of technologies and process options, and assembly of remedial alternatives from representative technology types; 5. Screen alternatives (Phase II) developed in Phase I for implementability, effectiveness, and cost to identify those alternatives which warrant advancement to the detailed analysis phase (Phase III) of the FS.

  18. Fiscal Year 2009 Annual Report for Operable Unit 3-14, Tank Farm Soil and INTEC Groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Forsythe, Howard S.

    2010-04-10

    This annual report summarizes maintenance, monitoring, and inspection activities performed to implement the selected remedy for Waste Area Group 3, Operable Unit 3-14, Tank Farm soil and groundwater at the Idaho Nuclear Technology and Engineering Center located within the Idaho National Laboratory Site. Results from monitoring perched water and groundwater at the Idaho Nuclear Technology and Engineering Center are also presented.

  19. Teaching Mass Transfer and Filtration Using Crossflow Reverse Osmosis and Nanofiltration: An Experiment for the Undergraduate Unit Operations Lab

    Science.gov (United States)

    Anastasio, Daniel; McCutcheon, Jeffrey

    2012-01-01

    A crossflow reverse osmosis (RO) system was built for a senior-level chemical engineering unit operations laboratory course. Intended to teach students mass transfer fundamentals related to membrane separations, students tested several commercial desalination membranes, measuring water flux and salt rejections at various pressures, flow rates, and…

  20. Teaching Mass Transfer and Filtration Using Crossflow Reverse Osmosis and Nanofiltration: An Experiment for the Undergraduate Unit Operations Lab

    Science.gov (United States)

    Anastasio, Daniel; McCutcheon, Jeffrey

    2012-01-01

    A crossflow reverse osmosis (RO) system was built for a senior-level chemical engineering unit operations laboratory course. Intended to teach students mass transfer fundamentals related to membrane separations, students tested several commercial desalination membranes, measuring water flux and salt rejections at various pressures, flow rates, and…

  1. Groundwater geochemical and selected volatile organic compound data, Operable Unit 1, Naval Undersea Warfare Center, Division Keyport, Washington, July 2015

    Science.gov (United States)

    Huffman, Raegan L.

    2016-05-18

    Previous investigations indicate that concentrations of chlorinated volatile organic compounds (CVOCs) are substantial in groundwater beneath the 9-acre former landfill at Operable Unit 1, Naval Undersea Warfare Center, Division Keyport, Washington. The U.S. Geological Survey has continued to monitor groundwater geochemistry to ensure that conditions remain favorable for contaminant biodegradation as specified in the Record of Decision for the site.

  2. Prevalence of Giardia duodenalis assemblages in weaned cattle on cow-calf operations in the United States

    Science.gov (United States)

    To determine the prevalence of Giardia duodenalis in weaned beef calves in cow-calf operations in the United States, fecal specimens were collected from 819 calves (6 to18 months of age) in 20 states from 49 locations. After cleaning and concentration procedures to maximize the potential recovery of...

  3. Pyrosequencing as a tool for the detection of Phytophthora species: error rate and risk of false Molecular Operational Taxonomic Units

    NARCIS (Netherlands)

    Vettraino, A.M.; Bonants, P.J.M.; Tomassini, A.; Bruni, N.; Vannini, A.

    2012-01-01

    Aims: To evaluate the accuracy of pyrosequencing for the description of Phytophthora communities in terms of taxa identification and risk of assignment for false Molecular Operational Taxonomic Units (MOTUs). Methods and Results: Pyrosequencing of Internal Transcribed Spacer 1 (ITS1) amplicons was u

  4. 78 FR 14361 - U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United...

    Science.gov (United States)

    2013-03-05

    ... Employment and Training Administration U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United States Steel Corporation, Mckeesport, PA; Notice of Initiation of...) filed on December 20, 2012 on behalf of workers of U.S. Steel Tubular Products, McKeesport...

  5. Remedial Design/Remedial Action Work Plan for Operable Units 6-05 and 10-04, Phase III

    Energy Technology Data Exchange (ETDEWEB)

    R. P. Wells

    2006-09-19

    The remedial design/remedial action for Operable Unit 6-05 (Waste Area Group 6) and Operable Unit 10-04 (Waste Area Group 10) - collectively called Operable Unit 10-04 has been divided into four phases. Phase I consists of developing and implementing institutional controls at Operable Unit 10-04 sites and developing and implementing Idaho National Laboratory-wide plans for both institutional controls and ecological monitoring. Phase II will remediate sites contaminated with trinitrotoluene and Royal Demolition Explosive. Phase III will remediate lead contamination at a gun range, and Phase IV will remediate hazards from unexploded ordnance. This Phase III remedial Design/Remedial Action Work Plan addresses the remediation of lead-contaminated soils found at the Security Training Facility (STF)-02 Gun Range located at the Idaho National Laboratory. Remediation of the STF-02 Gun Range will include excavating contaminated soils; physically separating copper and lead for recycling; returning separated soils below the remediation goal to the site; stabilizing contaminated soils, as required, and disposing of the separated soils that exceed the remediation goal; encapsulating and disposing of creosote-contaminated railroad ties and power poles; removing and disposing of the wooden building and asphalt pads found at the STF-02 Gun Range; sampling and analyzing soil to determine the excavation requirements; and when the remediation goals have been met, backfilling and contouring excavated areas and revegetating the affected area.

  6. Prevalence of roll-over protective structure (ROPS)-equipped tractors on Hispanic-operated farms in the United States.

    Science.gov (United States)

    Myers, John R

    2010-04-01

    Roll-over protective structures (ROPS) are known to prevent tractor overturn deaths, but not enough tractors are equipped with them in the United States to reduce the rate of these deaths to levels seen in several European countries. Recent literature has defined the use of ROPS on US farms in general, but little is known about ROPS use on Hispanic farm operations. Data from a national survey for the calendar year 2003 were used to assess the prevalence of ROPS use on Hispanic-operated farms. Farm characteristics previously identified to be associated with low ROPS prevalence rates on other farming operations were examined for these Hispanic farming operations. The overall ROPS prevalence rate on Hispanic farms was 52.2%. Adjusted odds ratios of potential risk factors found that the region where the farm was located and the acreage of the farm appeared to be the most significant indicators of the prevalence of ROPS on Hispanic farms. In addition, the age of the farm operator, the farm status as a full- or part-time operation, and the type of farm operation were also important factors. These findings were similar to those seen for racial minority farms and the general farming population. These results can be used to target ROPS promotion programs for Hispanic farmers across the United States.

  7. Operative and technological management of super-large united power grids: lessons of major world's blackouts

    Science.gov (United States)

    Brinkis, K.; Kreslins, V.; Mutule, A.

    2014-02-01

    Power system (PS) blackouts still persist worldwide, evidencing that the existing protective structures need to be improved. The discussed requirements and criteria to be met for joint synchronous operation of large and super-large united PSs should be based on close co-ordination of operative and technological management of all PSs involved in order to ensure secure and stable electricity supply and minimise or avoid the threat of a total PS blackout. The authors analyse the July 2012 India blackout - the largest power outage in history, which affected over 620 million people, i.e. half of India's population and spread across its 22 states. The analysis is of a general character, being applicable also to similar blackouts that have occurred in Europe and worldwide since 2003. The authors summarise and develop the main principles and methods of operative and technological management aimed at preventing total blackouts in large and super-large PSs. Neskatoties uz sasniegumiem elektroenerģētikas jomā un energosistēmu nepārtrauktu modernizāciju, pasaulē regulāri notiek sabrukumu avārijas. Rakstā apskatīti lielu un superlielu energosistēmu apvienību savstarpējas sinhronas darbības nodrošinājuma prasības un kritēriji, kas pamatojas uz operatīvās un tehnoloģiskās vadības ciešu koordināciju starp energosistēmām. Savstarpējas sinhronas darbības nodrošinājuma prasībām un kritērijiem ir izšķiroša nozīme, lai panāktu elektroapgādes drošumu un stabilitāti katrā energosistēmā, kas darbojas apvienotas energosistēmas sastāvā. Šo prasību un kritēriju ievērošana sekmē totālo avāriju izcelšanās iespēju samazināšanu un to novēršanu. Indijas 2012.gada totālo avāriju un citu analogo avāriju Eiropā un Amerikā analīze un izvērtējums laika posmā no 2003.gada, deva iespēju apkopot un izstrādāt lielu un superlielu energosistēmu operatīvās un tehnoloģiskās vadības principus un metodoloģiju, lai novērstu vai

  8. Global Strategy Implementation at the Business Unit Level: Operational Capabilities and Administrative Mechanisms

    OpenAIRE

    Kendall Roth; David M Schweiger; Allen J Morrison

    1991-01-01

    The study examines the impact of internationally strategy on organizational design and the influence of the organizational design on effectiveness at the business unit level. The empirical findings are based on survey responses from eighty-two business units competing in global industries. The findings are supportive of the contingency notion which suggests that business unit effectiveness is a function of the fit between the international strategy and the organizational design.© 1991 JIBS. J...

  9. Global Strategy Implementation at the Business Unit Level: Operational Capabilities and Administrative Mechanisms

    OpenAIRE

    Kendall Roth; David M Schweiger; Allen J Morrison

    1991-01-01

    The study examines the impact of internationally strategy on organizational design and the influence of the organizational design on effectiveness at the business unit level. The empirical findings are based on survey responses from eighty-two business units competing in global industries. The findings are supportive of the contingency notion which suggests that business unit effectiveness is a function of the fit between the international strategy and the organizational design.© 1991 JIBS. J...

  10. Population recovery of the Whooping Crane with emphasis on reintroduction efforts: Past and future

    Science.gov (United States)

    Ellis, D.H.; Lewis, J.C.; Gee, G.F.; Smith, D.G.

    1992-01-01

    The U.S. Fish and Wildlife Service (USFWS) began building a captive whooping crane (Grus americana) colony at Patuxent Wildlife Research Center (Patuxent), Maryland, in 1966. From 1976 to 1984, 73 eggs from this colony and 216 eggs from Wood Buffalo National Park (Wood Buffalo), Canada, nests were placed in sandhill crane (G. canadensis) nests at Grays Lake National Wildlife Refuge (Grays Lake), Idaho, the site of the first whooping crane reintroduction attempt. Although 84 chicks fledged from the 289 eggs, the egg transfer program has been discontinued because of inordinately high mortality (only ca. 13 birds remain in the wild in 1991) and lack of breeding in survivors. In recent decades new methods have emerged for introducing captive-produced offspring to the wild. Surrogate studies with sandhill cranes, particularly the endangered Mississippi sandhill cranes (G. c. pulla), have shown that young cranes, raised either by captive, conspecific foster parents, or by costumed humans and in close association with live cranes and lifelike crane taxidermic dummies, have high post-release survival rates. These techniques will likely be used in future whooping crane reintroduction programs. Current recovery objectives for the whooping crane include expansion of the 2 captive colonies, establishment of a third captive colony in Canada, and reintroduction of 2 additional wild populations. The Kissimmee Prairie in central Florida has been selected for the next release experiment. Evaluation of this site began in 1984, and risk assessment is expected to begin in 1992 with the transfer and monitoring of a group of captive-reared, juvenile whooping cranes. These 'tests of the environment' will, if results are favorable, be followed by a full-scale reintroduction effort of at least 20 birds/year beginning in 1994 or 1995.

  11. Design analysis of 2,000 lb JIB crane for chemical lab

    Energy Technology Data Exchange (ETDEWEB)

    ZIADA, H.H.

    1999-09-22

    A 2,000 lbf jib crane is needed to replace an existing 1,000 lbf jib crane in the Chemical Lab (Building MO-733). The existing 1,000 lbf jib crane (to be replaced) has a 174 boom (I-beam). The crane is attached to the wall through two brackets (about 8 1/2-ft apart). The boom is attached to the lower bracket, and a supporting rod is attached to the upper bracket. The supporting rod is attached to the boom at about 8-ft from the free end. After preliminary studies and discussions, it was decided to construct the new jib crane from two perpendicular I-beams (L-shape) without a supporting rod. The crane is to be supported on the wall through the two lower existing brackets (about 5-ft apart). The boom is to be 20-ft long cantilever (the horizontal I-beam). The vertical I-beam is to be attached to the lower two existing brackets to support the jib crane to the wall. This construction is to be similar to another existing 1,000 lbf jib crane (L-shape) in the lab. The purpose of this document is to perform a design analysis for the proposed 2,000 lbf jib crane to determine suitable sizes of members and configuration of the new jib crane assembly. After construction, if the as-built assembly differs from the 2,000 lbf jib crane as proposed in this document, a revision of this analysis needs to be performed to confirm the acceptability of the as-built assembly.

  12. Optimal population prediction of sandhill crane recruitment based on climate-mediated habitat limitations.

    Science.gov (United States)

    Gerber, Brian D; Kendall, William L; Hooten, Mevin B; Dubovsky, James A; Drewien, Roderick C

    2015-09-01

    1. Prediction is fundamental to scientific enquiry and application; however, ecologists tend to favour explanatory modelling. We discuss a predictive modelling framework to evaluate ecological hypotheses and to explore novel/unobserved environmental scenarios to assist conservation and management decision-makers. We apply this framework to develop an optimal predictive model for juvenile (<1 year old) sandhill crane Grus canadensis recruitment of the Rocky Mountain Population (RMP). We consider spatial climate predictors motivated by hypotheses of how drought across multiple time-scales and spring/summer weather affects recruitment. 2. Our predictive modelling framework focuses on developing a single model that includes all relevant predictor variables, regardless of collinearity. This model is then optimized for prediction by controlling model complexity using a data-driven approach that marginalizes or removes irrelevant predictors from the model. Specifically, we highlight two approaches of statistical regularization, Bayesian least absolute shrinkage and selection operator (LASSO) and ridge regression. 3. Our optimal predictive Bayesian LASSO and ridge regression models were similar and on average 37% superior in predictive accuracy to an explanatory modelling approach. Our predictive models confirmed a priori hypotheses that drought and cold summers negatively affect juvenile recruitment in the RMP. The effects of long-term drought can be alleviated by short-term wet spring-summer months; however, the alleviation of long-term drought has a much greater positive effect on juvenile recruitment. The number of freezing days and snowpack during the summer months can also negatively affect recruitment, while spring snowpack has a positive effect. 4. Breeding habitat, mediated through climate, is a limiting factor on population growth of sandhill cranes in the RMP, which could become more limiting with a changing climate (i.e. increased drought). These effects are

  13. Assessment of the feasibility of an improvement programme enabling operation of units 3 and 4 of Kozloduy nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Amri, A.; Aronov, J.; Bonino, F.; Cortes, P.; Gorbatchev, A.; Kanev, K.; Mattei, J.M.; Milhem, J.L.; Rollinger, F.; Sabotinov, L.; Samier, L. [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (FR). Inst. de Protection et de Securete Nucleaire (IPSN)

    2001-07-01

    Since ten years, different western assessments have been made of the safety of VVER 440/230 units, including those of the KOZLODUY Nuclear Power Plant located in Bulgaria. Concerning the latter, reference can be made to the work of an European Consortium (GRS/Germany, IPSN/France, AEA/England, AVN/ Belgium), in 1992 and 1993, during examination of restart conditions for Units 1 and 2. The objective of these assessments was the improvement of the overall level of safety with a view to maintain these units in service with satisfactory safety level for a limited period. The work identified their main deficiencies. At the present time, all the modifications decided upon for Units 1 and 2 of the KOZLODUY Nuclear Power Plant in 1992 and 1993 have been adopted and implemented for Units 3 and 4. In 1999, considering that these units would probably not be definitively shutdown before about ten years, IPSN decided to perform an internal assessment of the feasibility of an improvement programme enabling continued operation of units 3 and 4 of KOZLODUY Nuclear Power Plant during this delay. (orig.)

  14. Record of Decision for Tank Farm Soil and INTEC Groundwater, Operable Unit 3-14

    Energy Technology Data Exchange (ETDEWEB)

    L. S. Cahn

    2007-05-16

    This decision document presents the selected remedy for Operable Unit (OU) 3-14 tank farm soil and groundwater at the Idaho Nuclear Technology and Engineering Center (INTEC), which is located on the Idaho National Laboratory (INL) Site. The tank farm was initially evaluated in the OU 3-13 Record of Decision (ROD), and it was determined that additional information was needed to make a final decision. Additional information has been obtained on the nature and extent of contamination in the tank farm and on the impact to groundwater. The selected remedy was chosen in accordance with the Comprehensive Environmental Response, Liability and Compensation Act of 1980 (CERCLA) (42 USC 9601 et seq.), as amended by the Superfund Amendments and Reauthorization Act of 1986 (Public Law 99-499) and the National Oil and Hazardous Substances Pollution Contingency Plan (40 CFR 300). The selected remedy is intended to be the final action for tank farm soil and groundwater at INTEC. The response action selected in this ROD is necessary to protect the public health, welfare, or the environment from actual or threatened releases of hazardous substances into the environment. Such a release or threat of release may present an imminent and substantial endangerment to public health, welfare, or the environment. The remedial actions selected in this ROD are designed to reduce the potential threats to human health and the environment to acceptable levels. In addition, DOE-ID, EPA, and DEQ (the Agencies) have determined that no action is necessary under CERCLA to protect public health, welfare, or the environment at 16 sites located outside the tank farm boundary. The purposes of the selected remedy are to (1) contain contaminated soil as the radionuclides decay in place, (2) isolate current and future workers and biological receptors from contact with contaminated soil, and (3) restore the portion of Snake River Plain Aquifer contaminated by INTEC releases to Idaho Ground Water Quality

  15. BIOTIC INTEGRITY OF STREAMS IN THE SAVANNAH RIVER SITE INTEGRATOR OPERABLE UNITS, 1996 TO 2003

    Energy Technology Data Exchange (ETDEWEB)

    Paller, M; Susan Dyer, S

    2004-11-08

    The Savannah River Site (SRS) has been divided into six Integrator Operable Units (IOUs) that correspond to the watersheds of the five major streams on the SRS (Upper Three Runs, Fourmile Branch, Pen Branch, Steel Creek, and Lower Three Runs) and the portions of the Savannah River and Savannah River Swamp associated with the SRS. The streams are the primary integrators within each IOU because they potentially receive, through surface or subsurface drainage, soluble contaminants from all waste sites within their watersheds. If these contaminants reach biologically significant levels, they would be expected to effect the numbers, types, and health of stream organisms. In this study, biological sampling was conducted within each IOU as a measure of the cumulative ecological effects of the waste sites within the IOUs. The use of information from biological sampling to assess environmental quality is often termed bioassessment. The IOU bioassessment program included 38 sites in SRS streams and nine sites in the Savannah River. Sampling was conducted in 1996 to 1998, 2000, and 2003. Four bioassessment methods were used to evaluate ecological conditions in the IOU streams: the Index of Biotic Integrity, the Fish Health Assessment Index, measurement of fish tissue contaminant levels, and two benthic macroinvertebrate indices. The Index of Biotic Integrity (IBI) is an EPA supported method based on comparison of ecologically important and sensitive fish assemblage variables between potentially disturbed and reference (i.e., undisturbed) sites. It is designed to assess the ability of a stream to support a self-sustaining biological community and ecological processes typical of undisturbed, natural conditions. Since many types of contaminants can bioaccumulate, fish tissue contaminant data were used to determine the types of chemicals fish were exposed to and their relative magnitudes among IOUs. The Fish Health Assessment Index (HAI) is an EPA supported method for assessing

  16. Fecal corticoid monitoring in whooping cranes (Grus americana) undergoing reintroduction

    Science.gov (United States)

    Hartup, Barry K.; Olsen, Glenn H.; Czekala, Nancy M.

    2005-01-01

    We used radioimmunoassay to determine fecal corticoid concentrations and assess potential stress in 10 endangered whooping cranes (Grus americana) undergoing reintroduction to the wild. Fecal samples were collected shortly after hatching at a captive facility in Maryland, during field training in Wisconsin, and throughout a human-led migration to Florida. After a 14-day decline following hatching, fecal corticoid concentrations stabilized at baseline levels for the duration of the captive period, despite exposure to potentially stressful stimuli. Shipment of the cranes to the field training site was correlated with an eight- to 34-fold increase in fecal corticoid concentrations, which returned to baseline levels within 1 week. Increases were positively correlated with age but not body weight at the time of shipping. Fecal corticoid concentrations during the training period increased slightly and exhibited greater variation than levels observed at the captive facility, but were well within expected norms based on previous studies. Fecal corticoid concentrations increased twofold following premigration physical examinations and placement of radiotransmitters, and persisted for up to 4 days before they returned to baseline levels. Though fecal corticoid concentrations and variation during the migration period were similar to training levels, there was an overall decline in fecal corticoid concentrations during the artificial migration. Acute stressors, such as capture, restraint, and severe storms, were associated with stress responses by the cranes that varied in accordance with lasting physical or psychological stimuli. The overall reintroduction process of costume-rearing, ultralight aircraft habituation, training, and artificial migration was not associated with elevations in fecal corticoid concentrations suggestive of chronic stress.

  17. Performance-Based Technology Selection Filter application report for Teledyne Wah Chang Albany Operable Unit Number One

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, J.G.; Morrison, J.L.; Morneau, R.A.; O' Brien, M.C.; Rudin, M.J.

    1992-05-01

    This report summarizes the application of the Performance-Based Technology Selection Filter (PBTSF) developed for the Idaho National Laboratory's Buried Waste Integrated Demonstration Program as applied to remediation activities conducted at the Teledyne Wah Chang Albany (TWCA) Superfund Site, Operable Unit One. The remedial action at the TWCA Operable Unit One consisted of solidification, excavation, transportation, and monocell disposal of the contents of two sludge ponds contaminated with various inorganic and organic compounds. Inorganic compounds included low levels of uranium and radium isotopes, as well zirconium, hafnium, chromium, mercury, and nickel. Organic compounds included methylene chloride, 1,1,1-trichloroethane, 1,1-dichloroethane, tetrachloroethane, and hexachlorobenzene. Remediation began in June 1991, and was completed in November 1991. The TWCA Operable Unit One configuration option consisted of 15 functional subelements. Data were gathered on these subelements and end-to-end system operation to calculate numerical values for 28 system performance measures. These were then used to calculate a system performance score. An assessment was made of the availability and definitional clarity of these performance measures, applicability of PBTSF utility functions, and rollup methodology. The PBTSF scoring function worked well, with few problems noted in data gathering, utility function normalization, and scoring calculation. The application of this process to an actual in situ treatment and excavation technical process option clarified the specific terms and bounds of the performance score functions, and identified one problem associated with the definition of system boundary.

  18. Predication of Crane Condition Parameters Based on SVM and AR

    Science.gov (United States)

    Xiuzhong, Xu; Xiong, Hu; Congxiao, Zhou

    2011-07-01

    Through statistic analysis of vibration signals of motor on the container crane hoisting mechanism in a port, the feature vectors with vibration are obtained. Through data preprocessing and training data, Training models of condition parameters based on support vector machine (SVM) are established. The testing data of condition monitoring parameters can be predicted by the training models. During training the models, the penalty parameter and kernel function of model are optimized by cross validation. In order to analysis the accurate of SVM model, autoregressive model is used to predict the trend of vibration. The research showed the predicted results of model using SVM are better than the results by autoregressive (AR) modeling.

  19. Risk-based rules for crane safety systems

    Energy Technology Data Exchange (ETDEWEB)

    Ruud, Stian [Section for Control Systems, DNV Maritime, 1322 Hovik (Norway)], E-mail: Stian.Ruud@dnv.com; Mikkelsen, Age [Section for Lifting Appliances, DNV Maritime, 1322 Hovik (Norway)], E-mail: Age.Mikkelsen@dnv.com

    2008-09-15

    The International Maritime Organisation (IMO) has recommended a method called formal safety assessment (FSA) for future development of rules and regulations. The FSA method has been applied in a pilot research project for development of risk-based rules and functional requirements for systems and components for offshore crane systems. This paper reports some developments in the project. A method for estimating target reliability for the risk-control options (safety functions) by means of the cost/benefit decision criterion has been developed in the project and is presented in this paper. Finally, a structure for risk-based rules is proposed and presented.

  20. Improving machine operation management efficiency via improving the vehicle park structure and using the production operation information database

    Science.gov (United States)

    Koptev, V. Yu

    2017-02-01

    The work represents the results of studying basic interconnected criteria of separate equipment units of the transport network machines fleet, depending on production and mining factors to improve the transport systems management. Justifying the selection of a control system necessitates employing new methodologies and models, augmented with stability and transport flow criteria, accounting for mining work development dynamics on mining sites. A necessary condition is the accounting of technical and operating parameters related to vehicle operation. Modern open pit mining dispatching systems must include such kinds of the information database. An algorithm forming a machine fleet is presented based on multi-variation task solution in connection with defining reasonable operating features of a machine working as a part of a complex. Proposals cited in the work may apply to mining machines (drilling equipment, excavators) and construction equipment (bulldozers, cranes, pile-drivers), city transport and other types of production activities using machine fleet.

  1. 77 FR 73265 - Airworthiness Directives; Erickson Air-Crane Incorporated Helicopters

    Science.gov (United States)

    2012-12-10

    ...-03-AD; Amendment 39-17267; AD 2012-23-11] RIN 2120-AA64 Airworthiness Directives; Erickson Air-Crane... are adopting a new airworthiness directive (AD) for Erickson Air-Crane Incorporated (Erickson) Model S... as of January 14, 2013. ADDRESSES: For service information identified in this AD, contact Erickson...

  2. 78 FR 40063 - Airworthiness Directives; Erickson Air-Crane Incorporated Helicopters (Type Certificate...

    Science.gov (United States)

    2013-07-03

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Erickson Air-Crane... helicopter has been transferred to Erickson Air-Crane Incorporated (Erickson), and expand the applicability to include the similar Erickson Model S-64F helicopters. This proposed AD is prompted by a need to...

  3. Observation of sandhill cranes' (Grus canadensis) flight behavior in heavy fog

    Science.gov (United States)

    Kirsch, Eileen M.; Wellik, Mike J.; Suarez, Manuel J.; Diehl, Robert H.; Lutes, Jim; Woyczik, Wendy; Krapfl, Jon; Sojda, Richard S.

    2015-01-01

    The behaviors of birds flying in low visibility conditions remain poorly understood. We had the opportunity to monitor Sandhill Cranes (Grus canadensis) flying in heavy fog with very low visibility during a comprehensive landscape use study of refuging cranes in the Horicon Marsh in southeastern Wisconsin. As part of the study, we recorded flight patterns of cranes with a portable marine radar at various locations and times of day, and visually counted cranes as they departed the roost in the morning. We compared flight patterns during a fog event with those recorded during clear conditions. In good visibility, cranes usually departed the night roost shortly after sunrise and flew in relatively straight paths toward foraging areas. In fog, cranes departed the roost later in the day, did not venture far from the roost, engaged in significantly more circling flight, and returned to the roost site rather than proceeding to foraging areas. We also noted that compared to mornings with good visibility, cranes flying in fog called more frequently than usual. The only time in this 2-year study that observers heard young of the year calling was during the fog event. The observed behavior of cranes circling and lingering in an area while flying in poor visibility conditions suggests that such situations may increase chances of colliding with natural or anthropogenic obstacles in the vicinity.

  4. Results of an experiment to lead cranes on migration behind motorized ground vehicles

    Science.gov (United States)

    Ellis, D.H.; Clauss, B.; Watanabe, T.; Mykut, R.C.; Kinloch, M.; Ellis, Catherine H.; Urbanek, Richard P.; Stahlecker, Dale W.

    1997-01-01

    Ten greater sandhill cranes (Grus canadensis tabida), trained to enter and ride in a specially equipped truck, were transported at 80? days of age from their rearing site at Patuxent Wildlife Research Center (Patuxent), Maryland, to a reintroduction site located within the species? former breeding range in northern Arizona. After 5 additional weeks of training, these juvenile cranes were led south ca 600 km to a wintering area on the Arizona/Mexico border. Nine of the 10 survived the trek, 495 km of which was flown, although only a few cranes flew every stage of the route. Their longest flight was 77 km. Major problems during the migration were power line collisions (three, one fatal), eagle attacks (none fatal), and overheating (when air temperatures exceeded ca 25?C). All cranes that entered training quickly learned to follow the truck, and their tenacity when following under unfavorable conditions (e.g., poor light, extreme dust, or heat) showed that cranes could consistently be led over long distances. We cannot predict if the cranes will retrace their route unassisted when adults, but 2 cranes returned 130 km to the starting point of the migration after the flock was scattered by an eagle during our migration south. Three other cranes were recovered 55 km from the attack site and on course toward the starting point.

  5. Habitat preferences and conservation threats to Black-necked Cranes wintering in Bhutan.

    Science.gov (United States)

    Namgay, Rinchen; Wangchuk, Sangay

    2016-01-01

    Black-necked Crane (Grus nigricollis) is a vulnerable Red list species whose populations are declining. However, little is known about Black-necked Cranes' habitat requirements or the causes of their population decline. We identified Black-necked Cranes' winter roost and foraging preferences of Black-necked Cranes in Bhutan during the winter of 2013-2014. Black-necked Cranes' roosts were recorded using Garmin GPSmap 60CSx, while foraging preferences and threats to the birds were identified based on a survey of household heads (n = 107) residing within a 3 km radius of roost sites. We grouped the threats identified by the communities into four major categories, viz. biological, social, political and natural threats based on the relevance. Of the four major threats, communities residing within the roosting and foraging habitat of the Black-necked Crane reported biological threat as major. Biological threats as reported by communities include loss of habitat, food shortage and competition from other animals. We recommend the present roosting areas be designated as part of the conservation areas for Black-necked Crane wintering in Bumthang district. In addition to preserving these areas, government should also encourage farming in foraging habitats of Black-necked Crane, because they mainly feed on barley, wheat, paddy, potatoes and buckwheat, besides roots, tubers and insects in the wetlands.

  6. 76 FR 75450 - Safety Zone; Container Crane Relocation, Cooper and Wando Rivers, Charleston, SC

    Science.gov (United States)

    2011-12-02

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Container Crane Relocation, Cooper and... Guard is establishing a 100 yard temporary moving safety zone around a barge transporting two container..., South Carolina. Discussion of Rule On Monday, December 5, 2011, two container cranes are scheduled to...

  7. United States Department of Energy Nevada Operations Office Environmental Compliance Handbook. Third edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The Environment, Safety & Health Division (ESHD) of the Nevada Operations Office has prepared this Environmental Compliance Handbook for all users of the Nevada Test Site (NTS) and other US Department of Energy, Nevada Operations Office (DOE/NV) facilities. The Handbook gives an overview of the important environmental laws and regulations that apply to the activities conducted by the Nevada Operations Office and other users of DOE/NV facilities in Nevada.

  8. Liquid phase methanol LaPorte Process Development Unit: Modification, operation, and support studies

    Energy Technology Data Exchange (ETDEWEB)

    1991-02-28

    The LPMEOH process was conceived and patented by Chem Systems Inc. in 1975. Initial research and studies on the process focused on two distinct modes of operation. The first was a liquid fluidized mode with relatively large catalyst pellets suspended in a fluidizing liquid, and the second was an entrained (slurry) mode with fine catalyst particles slurried in an inert liquid. The development of both operating modes progressed in parallel from bench scale reactors, through an intermediate scale lab PDU, and then to the LaPorte PDU in 1984. The slurry mode of operation was ultimately chosen as the operating mode of choice due to its superior performance.

  9. Analysis of United States Marine Corps operations in support of humanitarian assistance and disaster relief

    OpenAIRE

    Gastrock, Jared R.; Iturriaga, Juan J.

    2013-01-01

    Approved for public release; distribution is unlimited. In order to improve the effectiveness of the United States Marine Corps (USMC) response to future international humanitarian assistance/disaster relief (HA/DR) missions, an analysis of the demands created by such disasters as well as the capabilities of the USMC is necessary. This research focuses on the primary response organization within the USMC, the Marine expeditionary unit (MEU),and those resources available to the MEU to condu...

  10. Investigating transportation system in container terminals and developing a yard crane scheduling model

    Directory of Open Access Journals (Sweden)

    Hassan Javanshir

    2012-01-01

    Full Text Available The world trade has tremendous growth in marine transportation. This paper studies yard crane scheduling problem between different blocks in container terminal. Its purpose is to minimize total travel time of cranes between blocks and total delayed workload in blocks at different periods. In this way the problem is formulated as a mixed integer programming (MIP model. The block pairs between which yard cranes will be transferred, during the various periods, is determined by this model. Afterwards the model is coded in LINGO software, which benefits from branch and bound algorithm to solve. Computational results determine the yard cranes movement sequence among blocks to achieve minimum total travel time for cranes and minimum total delayed workload in blocks at different planning periods. Also the results show capability and adequacy of the developed model.

  11. Solid Modeling and Finite Element Analysis of an Overhead Crane Bridge

    Directory of Open Access Journals (Sweden)

    C. Alkin

    2005-01-01

    Full Text Available The design of an overhead crane bridge with a double box girder has been investigated and a case study of a crane with 35 ton capacity and 13 m span length has been conducted. In the initial phase of the case study, conventional design calculations proposed by F. E. M. Rules and DIN standards were performed to verify the stress and deflection levels. The crane design was modeled using both solids and surfaces. Finite element meshes with 4-node tetrahedral and 4-node quadrilateral shell elements were generated from the solid and shell models, respectively. After a comparison of the finite element analyses, the conventional calculations and performance of the existing crane, the analysis with quadratic shell elements was found to give the most realistic results. As a result of this study, a design optimization method for an overhead crane is proposed. 

  12. Investigation of Seismic Behavior of Container Crane Structures by Shake Table Tests and Mathematical Modeling

    Directory of Open Access Journals (Sweden)

    C. Oktay Azeloglu

    2014-01-01

    Full Text Available This paper is concerned with the verification of mathematical modeling of the container cranes under earthquake loadings with shake table test results. Comparison of the shake table tests with the theoretical studies has an important role in the estimation of the seismic behavior of the engineering structures. For this purpose, a new shake table and mathematical model were developed. Firstly, a new physical model is directly fixed on the shake table and the seismic response of the container crane model against the past earthquake ground motion was measured. Secondly, a four degrees-of-freedom mathematical model is developed to understand the dynamic behaviour of cranes under the seismic loadings. The results of the verification study indicate that the developed mathematical model reasonably represents the dynamic behaviour of the crane structure both in time and frequency domains. The mathematical model can be used in active-passive vibration control studies to decrease structural vibrations on container cranes.

  13. Crane Safety Assessment Method Based on Entropy and Cumulative Prospect Theory

    Directory of Open Access Journals (Sweden)

    Aihua Li

    2017-01-01

    Full Text Available Assessing the safety status of cranes is an important problem. To overcome the inaccuracies and misjudgments in such assessments, this work describes a safety assessment method for cranes that combines entropy and cumulative prospect theory. Firstly, the proposed method transforms the set of evaluation indices into an evaluation vector. Secondly, a decision matrix is then constructed from the evaluation vectors and evaluation standards, and an entropy-based technique is applied to calculate the index weights. Thirdly, positive and negative prospect value matrices are established from reference points based on the positive and negative ideal solutions. Thus, this enables the crane safety grade to be determined according to the ranked comprehensive prospect values. Finally, the safety status of four general overhead traveling crane samples is evaluated to verify the rationality and feasibility of the proposed method. The results demonstrate that the method described in this paper can precisely and reasonably reflect the safety status of a crane.

  14. Fusarium mycotoxins from peanuts suspected as a cause of sandhill crane mortality

    Science.gov (United States)

    Windingstad, R.M.; Cole, R.J.; Nelson, P.E.; Roffe, T.J.; George, R.R.; Dorner, J.W.

    1989-01-01

    An estimated 9,500 sandhill cranes (Grus canadensis) died in Gaines County, Texas and Roosevelt County, New Mexico between 1982 and 1987. The predominant clinical sign observed in sick cranes was their inability to hold their heads erect, both while standing and flying. Multiple muscle hemorrhages and submandibular edema were the most common lesions seen at necropsy. Mycotoxins produced by Fusarium sp. growing during cold, wet weather on peanuts left in the field after harvest, the predominant foods of the dead cranes at the time of these mortality events, were identified as the most likely cause of this mortality. Rendering moldy peanuts inaccessible to the cranes by conventional tillage resulted in reduced crane mortality in these areas.

  15. Modern technologies for rendering information support to cogeneration steam turbine units in their design and operation stages

    Science.gov (United States)

    Brezgin, V. I.; Brodov, Yu. M.; Chubarov, A. A.; Brezgin, D. V.

    2013-08-01

    Application of modern information technologies in different stages of the lifecycle of cogeneration turbines is considered as one of possible ways for improving their competitiveness. Specific features relating to rendering information support for steam turbine units during the periods of their design and operation, which are the main stages of their life cycle, are presented. Three-dimension modeling, adaptive, and parametric design technologies are applied in the equipment design stages. Information support technologies developed by the authors are applied during the operation stage. Information is integrated by using a product lifecycle management (PLM) system.

  16. Construction and operation of the flue gas desulphurization plant at Altbach/Deizisau power station, unit no. 5. Experience from commissioning and initial operating period

    Energy Technology Data Exchange (ETDEWEB)

    Maier, R.; Necker, P.; Strauss, J.; Hemming, H.; Landgraf, E.

    1987-04-01

    Since take-over the flue gas desulphurization plant has easily maintained the required level of desulphurisation. Caking-on and incrustation are substantially avoided. By redesigning the gypsum drying process an easily storable gypsum which can be used both in the gypsum and cement industry is produced. According to experience gained to date it is expected that the flue gas desulphurisation plant will not impair the availability of the power plant unit taking into account statutory regulations. In overall terms the plant has satisfactorily fulfilled the expectations of the operator.

  17. Inverse spectral results for Schrödinger operators on the unit interval with partial information given on the potentials

    Science.gov (United States)

    Amour, L.; Faupin, J.; Raoux, T.

    2009-03-01

    We pursue the analysis of the Schrödinger operator on the unit interval in inverse spectral theory initiated in the work of Amour and Raoux ["Inverse spectral results for Schrödinger operators on the unit interval with potentials in Lp spaces," Inverse Probl. 23, 2367 (2007)]. While the potentials in the work of Amour and Raoux belong to L1 with their difference in Lp (1≤p<∞), we consider here potentials in Wk,1 spaces having their difference in Wk,p, where 1≤p≤+∞, k ɛ{0,1,2}. It is proved that two potentials in Wk,1([0,1]) being equal on [a,1] are also equal on [0,1] if their difference belongs to Wk,p([0,a]) and if the number of their common eigenvalues is sufficiently high. Naturally, this number decreases as the parameter a decreases and as the parameters k and p increase.

  18. Nutritional value of winter foods for whooping cranes

    Science.gov (United States)

    Nelson, J.T.; Slack, R.D.; Gee, G.F.

    1996-01-01

    We measured metabolizable energy and digestibility of Whooping Crane (Grus americana) winter foods (blue crab [Callinectes sapidus]), common Rangia clam (Rangia cuneata), wolfberry fruit (Lycium carolinianurn [wolfberry]), and live oak acorn (Ouercus virginiana [acorn])] with feeding trials to captive-reared Whooping Cranes. Apparent metabolizable energy coefficients (expressed as %) were for crab (34.1), Rangia clam (75.0), wolfberry (44.8), and acorn (43.2). Digestion coefficients for protein were lower for plant foods (48.9 and 53.4) than for animal foods (69.4 and 75.2). Digestion coefficients for total lipid differed among foods: highest and lowest lipid digestibility was for acorn (87.2) and wolfberry (60.0), respectively. We also determined total energy and percent protein and lipid of the four foods and stout razor clam (Tagelus plebeius); gross energy was 2-5x higher for acorn and wolfberry on a dry-weight basis than for blue crab and stout razor clam. Crude protein was 2-3x higher for blue crab than for wolfberry and stout razor clam. Wolfberry ranked the highest of five foods for metabolic energy and total lipid nutrient availability per kg of food ingested, and blue crab ranked highest for crude protein availability.

  19. Baseline risk assessment for the quarry residuals operable unit of the Weldon Spring Site, Weldon Spring, Missouri

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The U.S. Department of Energy (DOE) is conducting cleanup activities at the Weldon Spring site, located in St. Charles County, Missouri, about 48 km (30 mi) west of St. Louis. Cleanup of the site consists of several integrated components. The quarry residuals operable unit (QROU), consisting of the Weldon Spring quarry and its surrounding area, is one of four operable units being evaluated. In accordance with requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended, DOE is conducting a remedial investigation/feasibility study (RI/FS) to determine the proper response to address various contaminated media that constitute the QROU. Specifically, the operable unit consists of the following areas and media: the residual material remaining at the Weldon Spring quarry after removal of the pond water and the bulk waste; groundwater underlying the quarry and surrounding area; and other media located in the surrounding vicinity of the quarry, including surface water and sediment at Femme Osage Slough, Little Femme Osage Creek, and Femme Osage Creek. An initial evaluation of conditions at the quarry area identified remaining data requirements needed to support the conceptual site exposure and hydrogeological models. These data requirements are discussed in the RI/FS work plan issued in January 1994. Soil contamination located at a property adjacent to the quarry, referred to as Vicinity Property 9 (VP9), was originally part of the scope of the QROU, as discussed in the work plan. However, a decision was subsequently made to remediate this vicinity property as part of cleanup activities for the chemical plant operable unit, as provided for in the Record of Decision (ROD). Remediation of VP9 was completed in early 1996. Hence, this baseline risk assessment (BRA) does not address VP9.

  20. KC-46A Formal Training Unit (FTU) and First Main Operating Base (MOB 1) Beddown EIS. Volume 1

    Science.gov (United States)

    2014-03-01

    support a1rcraft operations and pHot and personnel training • ht UMI O~f’t EIS, the USAF ldet~titJ.s AltUS AF8 as the PTI~ fened A#etnAtfv• for liH! FTV...Frequency, commonly perceived as pitch, is the number of times per second the sound causes air molecules to oscillate . Frequency is measured in units of