WorldWideScience

Sample records for united states rail

  1. High Speed Rail (HSR) in the United States

    Science.gov (United States)

    2009-12-08

    announced that it will expand the capacity on its aging high speed line between Tokyo and Osaka, the most heavily traveled intercity rail segment in the...United States, in most of these countries intercity rail travel (including both conventional and high speed rail) represents less than 10% of all...that is sometimes mentioned by its advocates. Intercity passenger rail transport is relatively safe, at least compared with highway travel . And HSR in

  2. Advancing high-speed rail policy in the United States.

    Science.gov (United States)

    2012-06-01

    This report builds on a review of international experience with high-speed rail projects to develop recommendations for a High-speed rail policy framework for the United States. The international review looked at the experience of Korea, Taiwan, Chin...

  3. Analyzing the United States Department of Transportation's Implementation Strategy for High Speed Rail: Three Case Studies

    Science.gov (United States)

    Robinson, Ryan

    High-speed rail (HSR) has become a major contributor to the transportation sector with a strong push by the Obama Administration and the Department of Transportation to implement high-speed rail in the United States. High-speed rail is a costly transportation alternative that has the potential displace some car and airport travel while increase energy security and environmental sustainability. This thesis will examine the United States high-speed rail implementation strategy by comparing it to the implementation strategies of France, Japan, and Germany in a multiple case study under four main criteria of success: economic profitability, reliability, safety, and ridership. Analysis will conclude with lessons to be taken away from the case studies and applied to the United States strategy. It is important to understand that this project has not been established to create a comprehensive implementation plan for high-speed rail in the United States; rather, this project is intended to observe the depth and quality of the current United States implementation strategy and make additional recommendations by comparing it with France, Japan, and Germany.

  4. Economic and demographic impacts of passenger rail systems : the impact of intercity passenger rails on population and employment change in the United States, 2000-2010.

    Science.gov (United States)

    2015-12-01

    This research examines the impact of intercity passenger rails on change in population and employment at the county level in the continental United States from 2000 to 2010. This research adopts an integrated spatial regression approach that incorpor...

  5. 78 FR 57450 - State Rail Plan Guidance

    Science.gov (United States)

    2013-09-18

    ... of impact assessment required for the rail infrastructure, facilities, and service improvements contained in State rail plans. Other issues raised by commenters included the importance of involving... to emphasize the importance of preparing State rail plans within the policy and procedural contexts...

  6. 77 FR 17121 - RailAmerica, Inc., Palm Beach Rail Holding, Inc., RailAmerica Transportation Corp., RailTex, Inc...

    Science.gov (United States)

    2012-03-23

    ...% of the Class A Common Units of TransRail, giving RailTex a 70% ownership interest in TransRail and control of W&C through TransRail. The MG Principals will retain the Class B Common Units of TransRail... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35605] RailAmerica, Inc...

  7. Potential scenarios of concern for high speed rail operations

    Science.gov (United States)

    2011-03-16

    Currently, multiple operating authorities are proposing the : introduction of high-speed rail service in the United States. : While high-speed rail service shares a number of basic : principles with conventional-speed rail service, the operational : ...

  8. Analyzing the Potential for High-speed Rail as Part of the Multimodal Transportation System in the United States' Midwest Corridor

    Directory of Open Access Journals (Sweden)

    Jeffrey C. Peters

    2014-06-01

    Full Text Available With increasing demand and rising fuel costs, both travel time and cost of current intercity passenger transportation modes are becoming increasingly relevant. Around the world, highspeed rail (HSR is seen as a way to alleviate demand on highways and at airports. Ridership is the critical element in determining the viability of a large capital, long-term transportation investment. This paper provides a systematic, consistent methodology for analyzing systemwide modal ridership with and without a proposed HSR network and analyzes the potential for highspeed rail as part of the existing multimodal transportation system in a region in terms of ridership. Considerations of capital investment (e.g., network design and HSR speed, along with exogenous demographic, technological, economic, and policy trends in the long-term, are used to project ridership over time. This study represents an important step toward a consistent, comprehensive economic analysis of HSR in the United States.

  9. Demand forecast for rail shipment of radioactive material in the United States

    International Nuclear Information System (INIS)

    Allen, G.C.; Cashwell, J.W.

    1981-01-01

    A summary of the market potential for radioactive material (in millions of ton-miles) is presented in tabular form. These include the following: milled uranium ore; mill tailings; natural uranium hexafluoride; enriched uranium hexafluoride; fresh fuel, spent fuel; low-level waste; transuranic waste; and high-level waste. The maximum realistic market share for rail carriers is always less than these values because of the lack of rail access to some shipping and receiving facilities, small material quantities which could most easily move by other modes, short shipping distances for certain transport segments and greater operational convenience of other modes for some material categories. While market share and revenues for radioactive material are presently small, rail carriers appear to have a market advantage for milled uranium ore, transuranic waste and high-level waste. The potential for a significantly increased market share exists for spent fuel and uranium hexafluoride. While more fresh fuel and low-level waste can be transported by rail, it is unlikely that rail market share for radioactive materials (RAM) in general will rise to the potential maximum because many of these materials have historically been moved by truck and transported in frequent, small shipments

  10. 50 CFR 20.104 - Seasons, limits, and shooting hours for rails, woodcock, and common (Wilson's) snipe.

    Science.gov (United States)

    2010-10-01

    ... rails, woodcock, and common (Wilson's) snipe. 20.104 Section 20.104 Wildlife and Fisheries UNITED STATES... for rails, woodcock, and common (Wilson's) snipe. This section provides for the annual hunting of certain rails, woodcock, and snipe in the 48 contiguous United States. [44 FR 7148, Feb. 6, 1979...

  11. High speed rails. Fatigue behaviour

    International Nuclear Information System (INIS)

    Duart, J. M.; Pero-Sanz, J. A.; Verdeja, J. I.

    2005-01-01

    In recent years, passenger train speed and freight train load have increased to enhance efficiency of rail road transportation. These trends have increased the severity of rail service conditions, calling for rails with greater wear resistance, strength and fatigue behaviour. In the United Stated and Europe, track site weld rails are made entirely by aluminothermic process. This work describes the results of experimental study conducted on bending fatigue strength of plain rails and aluminothermic welded rails with preheating procedures (oxipropane and air-induced propane) approved by railways authorities. Compliance with the required fatigue strength shall be ascertained by 4 point pulsating bending test in accordance with European standards by aluminothermic welding in rails. The locati method, based in the empirical Miner's law about the cumulative damage on a fatigue tested material, allows, once known the Wohler curve of the welding process in use to settle the fatigue tensile limit at 50% with only one test. The values obtained at 2.10''6 cycles for plain rails (S f =353 MPa), oxipropane preheated aluminothermic weld rails (S f =225 MPa), and propane-air induced aluminothermic weld rails (S f =210 MPa) are very similar to those resulting from test method stated in the European Standard. From our point of view and due to its ease, speediness and savings, this is the most suitable test to check the quality and compare the aluminothermic processes in use. (Author) 15 refs

  12. EVALUATION OF STRAIN-STRESS STATE OF THE RAILS IN THE PRODUCTION

    Directory of Open Access Journals (Sweden)

    V. V. Muravev

    2017-01-01

    Full Text Available High values of residual stresses is one of the most common reason of breaking lots of metal constructions, including rails. These stresses can reach values of flow limit, especially in the area of faults. Estimation of residual stresses values allows to get information about technical condition of the rail and also allow to avoid abnormal situations So, the aim of the research is creating the model of stress-strain state of the rail, which was hardened in its top and bottom, and to compare modeling results with experimental measurements of stresses and discrepancy of the housing.For creating the model and making evaluations by finite element method we used a program COMSOL. Forces on the top and bottom of the rail cause tension stresses, forces on the web of the rail cause tensile stresses. We compared calculated values of stresses with discrepancy of the housing. The discrepancy of the housing is informative characteristic for estimating the residual stresses according to standards. For experimental measurements we used an acoustic structuroscope SEMA. This structuroscope uses the acoustoelastic phenomenon for measurements. We made measurements of the five rails.According to the calculation results of the model, critical discrepancy of the housing in 2 mm corresponded to the following values of maximum stresses: –54 MPa in the top of the rail, 86 MPa in the web and –62 MPa in the bottom of the rail. Experimental measurements are the following: from –48 MPa to – 64 MPa in the top of the rail, 54 MPa to 93 MPa in the web of the rail, and –59 MPA to –74 MPa in the bottom of the rail. Absolute error was ±5 MPa.Thus we created the model, which allowed to analyze strain-stress state and compare real values of stresses with discrepancy of the housing. Results of the modeling showed coincidence with structure of distribution of residual stresses in five probes of rails

  13. 46 CFR 108.221 - Storm rails.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Storm rails. 108.221 Section 108.221 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Construction and Arrangement Rails § 108.221 Storm rails. Each unit must have a storm rail in the following...

  14. Rail transportation of Fernald remediation waste

    International Nuclear Information System (INIS)

    Fellman, R.T.; Lojek, D.A.; Motl, G.P.; Weddendorf, W.K.

    1995-01-01

    Remediation of the Department of Energy (DOE) Fernald site located north of Cincinnati will generate large quantities of low-level radwaste. This volume includes approximately 1,050,000 tons of material to be removed from eight waste pits comprising Operable Unit 1 (OU-1). The remedial alternative selected includes waste material excavation, drying and transportation by rail to a burial site in the arid west for disposal. Rail transportation was selected not only because rail transportation is safer than truck transportation, but also because of the sheer magnitude of the project and the availability of bulk rail car unloading facilities at a representative disposal site. Based upon current waste quantity estimates as presented in the Feasibility Study for OUI, a fully-loaded 47-car unit train would depart the Fernald site weekly for five years. This paper illustrates the steps taken to obtain agency and public acceptance of the Record of Decision for the remedy which hinged on rail transportation. A preliminary, but detailed, rail transportation plan was prepared for the project to support a series of CERCLA public meetings conducted in late 1994. Some of the major issues addressed in the plan included the following: (1) Scope of project leading to selection of rail transportation; (2) Waste classification; (3) Rail Company overview; (4) Train configuration and rail car selection; (5) Routing; (6) Safety; (7) Prior Notification Requirements (8) Emergency Response. A series of three public meetings identified a number of issues of prime concern to Fernald stakeholders. Following resolution of these issues during the public comment period, a Record of Decision (ROD) approving implementation of the rail transportation strategy was approved pending incorporation of EPA and State of Ohio comments on December 22, 1994

  15. Estimated United States Transportation Energy Use 2005

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C A; Simon, A J; Belles, R D

    2011-11-09

    A flow chart depicting energy flow in the transportation sector of the United States economy in 2005 has been constructed from publicly available data and estimates of national energy use patterns. Approximately 31,000 trillion British Thermal Units (trBTUs) of energy were used throughout the United States in transportation activities. Vehicles used in these activities include automobiles, motorcycles, trucks, buses, airplanes, rail, and ships. The transportation sector is powered primarily by petroleum-derived fuels (gasoline, diesel and jet fuel). Biomass-derived fuels, electricity and natural gas-derived fuels are also used. The flow patterns represent a comprehensive systems view of energy used within the transportation sector.

  16. The Rail Alignment Environmental Impact Statement: An Update

    International Nuclear Information System (INIS)

    Sweeney, R.

    2005-01-01

    On July 23,2002, the President of the United States signed into law a joint resolution of the United States Congress designating the Yucca Mountain site in Nye County, Nevada, for development as a geologic repository for the disposal of spent nuclear fuel and high-level radioactive waste. If the US. Nuclear Regulatory Commission authorizes construction of the repository and receipt and possession of spent nuclear fuel and high-level radioactive at Yucca Mountain, the U.S. Department of Energy (DOE) would be responsible for transporting these materials to the Yucca Mountain repository as part of its obligation under the Nuclear Waste Policy Act. Part of the site recommendation decision included the analysis of a nation-wide shipping campaign to the proposed repository site. The ''Final Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada'' (February 2002) (Repository EIS) evaluated the potential impacts of the transportation of 70,000 Metric Tons of Heavy Metal spent nuclear fuel and high-level radioactive waste from 77 locations around the nation to the potential repository in Nevada over a 24 year shipping campaign. In the Repository EIS, DOE identified mostly rail as its preferred mode of transportation, both nationally and in the State of Nevada. In December 2003, based on public comments and the environmental analyses in the Repository EIS, DOE identified a preference for the Caliente rail corridor in Nevada. On April 8, 2004, DOE issued a Record of Decision (ROD) on the Mode of Transportation and Nevada Rail Corridor for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada. In this ROD, the DOE announced that it had decided to select the mostly rail scenario analyzed in the Repository EIS as the transportation mode both on a national basis and in the State of Nevada. Under the mostly rail

  17. Organochlorine residues and shell thicknesses in eggs of the clapper rail, common gallinule, purple gallinule, and limpkin (class Aves), eastern and southern United States, 1972-74.

    Science.gov (United States)

    Klaas, E E; Ohlendorf, H M; Cromartie, E

    1980-12-01

    Organochlorine residues and shell thicknesses were surveyed in eggs of the clapper rail (Rallus longirostris), purple gallinule (Porphyrula martinica), common gallinule (Gallinula chloropas), and limpkin (Aramus guarauna) from the eastern and southern United States. Clapper rail eggs were collected during 1972-73 in New Jersey, Virginia, and South Carolina. During 1973-74, gallinule eggs were collected in Florida, South Carolina, and Louisiana, and limpkin eggs were collected in Florida. Egg contents were analyzed for residues of organochlorine pesticides, including DDT, TDE, DDE, dieldrin, mirex, heptachlor epoxide, oxychlordane, cis-chlordane (and/or trans-nonachlor), cis-nonachlor, hexachlorobenzene (HCB), toxaphene, and endrin, and for polychlorinated biphenyls (PCBs). Shell thicknesses of recent eggs of these species were compared with archival eggs that had been collected before 1947. With the exception of the limpkin, the majority of eggs analyzed contained residues of p,p'-DDE and PCBs. Geometric means ranged from 0.10 ppm to 1.3 ppm. Small amounts (less than 1.0 ppm) of mirex, dieldrin, cis-chlordane (and/or trans-nonachlor), TDE, and DDT were detected in a few eggs. No evidence of eggshell thinning was found for any of the species studied. DDE residues in clapper rail eggs were higher in New Jersey and Virginia than in South Carolina.

  18. Organochlorine residues and shell thickness in eggs of the clapper rail, common gallinule, purple gallinule, and limpkin (Class Aves), eastern and southern United States, 1972-74

    Science.gov (United States)

    Klaas, E.E.; Ohlendorf, H.M.; Cromartie, E.

    1980-01-01

    Organochlorine residues and shell thicknesses were surveyed in eggs of the clapper rail (Rallus longirostris), purple gallinule (Porphyrula martinica), common gallinule (Gallinula chloropas), and limpkin (Aramus guarauna) from the eastern and southern United States. Clapper rail eggs were collected during 1972-73 in New Jersey, Virginia, and South Carolina. During 1973-74, gallinule eggs were collected in Florida, South Carolina, and Louisiana, and limpkin eggs were collected in Florida. Egg contents were analyzed for residues of organochlorine pesticides, including DDT, TDE, DDE, dieldrin, mirex, heptachlor epoxide, oxychlordane, cis-chlordane (and/or trans-nonachlor), cis-nonachlor, hexachlorobenzene (HCB), toxaphene, and endrin, and for polychlorinated biphenyls (PCBs). Shell thicknesses of recent eggs of these species were compared with archival eggs that had been collected before 1947. With the exception of the limpkin, the majority of eggs analyzed contained residues of p,p'-DDE and PCBs. Geometric means ranged from 0.10 ppm to 1.3 ppm. Small amounts (less than 1.0 ppm) of mirex, dieldrin, cis-chlordane (and/or trans-nonachlor), TDE, and DDT were detected in a few eggs. No evidence of eggshell thinning was found for any of the species studied. DDE residues in clapper rail eggs were higher in New Jersey and Virginia than in South Carolina.

  19. Formulating a strategy for securing high-speed rail in the United States.

    Science.gov (United States)

    2013-03-01

    This report presents an analysis of information relating to attacks, attempted attacks, and plots against high-speed rail (HSR) : systems. It draws upon empirical data from MTIs Database of Terrorist and Serious Criminal Attacks Against Public Sur...

  20. High-speed ground transportation development outside United States

    Energy Technology Data Exchange (ETDEWEB)

    Eastham, T.R. [Queen`s Univ., Kingston, Ontario (United Kingdom)

    1995-09-01

    This paper surveys the state of high-speed (in excess of 200 km/h) ground-transportation developments outside the United States. Both high-speed rail and Maglev systems are covered. Many vehicle systems capable of providing intercity service in the speed range 200--500 km/h are or will soon be available. The current state of various technologies, their implementation, and the near-term plans of countries that are most active in high-speed ground transportation development are reported.

  1. Scheduling Additional Train Unit Services on Rail Transit Lines

    OpenAIRE

    Zhibin Jiang; Yuyan Tan; Özgür Yalçınkaya

    2014-01-01

    This paper deals with the problem of scheduling additional train unit (TU) services in a double parallel rail transit line, and a mixed integer programming (MIP) model is formulated for integration strategies of new trains connected by TUs with the objective of obtaining higher frequencies in some special sections and special time periods due to mass passenger volumes. We took timetable scheduling and TUs scheduling as an integrated optimization model with two objectives: minimizing travel ti...

  2. The rail abandonment process: A southern perspective

    International Nuclear Information System (INIS)

    1988-12-01

    One factor in evaluating the desirability of rail transport for high-level radioactive wastes or spent fuels is the frequency, or lack thereof, with which railroad and railroad lines have been, and are, abandoned. If DOE makes a decision to use the rail option and a line is subsequently abandoned, the choice results in increased cost, time delays and possibly safety problems: Information is therefore needed prior to the decision-making process to evaluate the desirability of the rail shipping option. One result of the abandonments mentioned herein, as well as other later abandonments, is the creation of a US rail system undergoing an evolutionary process in the 1980s as far-reaching as the changes that occurred when the industry was in its infancy a century and-a-half ago. The purpose of this paper is to examine the factors leading to some of these changes by tracing the historical development of the rail abandonment process, with particular emphasis on the rise of regional railroads, their problems in the modern era and current trends in rail abandonments as well as their effects on the southeastern United States

  3. Optimization of wheel-rail interface friction using top-of-rail friction modifiers: State of the art

    Science.gov (United States)

    Khan, M. Roshan; Dasaka, Satyanarayana Murty

    2018-05-01

    High Speed Railways and Dedicated Freight Corridors are the need of the day for fast and efficient transportation of the ever growing population and freight across long distances of travel. With the increase in speeds and axle loads carried by these trains, wearing out of rails and train wheel sections are a common issue, which is due to the increase in friction at the wheel-rail interfaces. For the cases where the wheel-rail interface friction is less than optimum, as in case of high speed trains with very low axle loads, wheel-slips are imminent and loss of traction occurs when the trains accelerate rapidly or brake all of a sudden. These vast variety of traction problems around the wheel-rail interface friction need to be mitigated carefully, so that the contact interface friction neither ascents too high to cause material wear and need for added locomotive power, nor be on the lower side to cause wheel-slips and loss of traction at high speeds. Top-of-rail friction modifiers are engineered surface coatings applied on top of rails, to maintain an optimum frictional contact between the train wheels and the rails. Extensive research works in the area of wheel-rail tribology have revealed that the optimum frictional coefficients at wheel-rail interfaces lie at a value of around 0.35. Application of top-of-rail (TOR) friction modifiers on rail surfaces add an extra layer of material coating on top of the rails, with a surface frictional coefficient of the desired range. This study reviews the common types of rail friction modifiers, the methods for their application, issues related with the application of friction modifiers, and a guideline on selection of the right class of coating material based on site specific requirements of the railway networks.

  4. Effects of driver attention on rail crossing safety and : The effects of auditory warnings and driver distraction on rail crossing safety.

    Science.gov (United States)

    2016-05-05

    Train-vehicle/train collisions at highway-rail grade crossings (crossings) continue to be a major issue in the US and around the world. Although the United States has made great strides in improving safety at crossings since the 1970s, vehicle-train ...

  5. Rail inspection system based on iGPS

    Science.gov (United States)

    Fu, Xiaoyan; Wang, Mulan; Wen, Xiuping

    2018-05-01

    Track parameters include gauge, super elevation, cross level and so on, which could be calculated through the three-dimensional coordinates of the track. The rail inspection system based on iGPS (indoor/infrared GPS) was composed of base station, receiver, rail inspection frame, wireless communication unit, display and control unit and data processing unit. With the continuous movement of the inspection frame, the system could accurately inspect the coordinates of rail; realize the intelligent detection and precision measurement. According to principle of angle intersection measurement, the inspection model was structured, and detection process was given.

  6. Evaluating the use of operational management techniques for capacity improvements on shared-use rail corridors : final report.

    Science.gov (United States)

    2016-01-01

    The majority of intercity passenger and commuter rail services in the United States (U.S.) operate on the shared-use corridors with : freight rail services. These types of operations tend to be challenging for efficient capacity utilization and relia...

  7. Walking associated with public transit: moving toward increased physical activity in the United States.

    Science.gov (United States)

    Freeland, Amy L; Banerjee, Shailendra N; Dannenberg, Andrew L; Wendel, Arthur M

    2013-03-01

    We assessed changes in transit-associated walking in the United States from 2001 to 2009 and documented their importance to public health. We examined transit walk times using the National Household Travel Survey, a telephone survey administered by the US Department of Transportation to examine travel behavior in the United States. People are more likely to transit walk if they are from lower income households, are non-White, and live in large urban areas with access to rail systems. Transit walkers in large urban areas with a rail system were 72% more likely to transit walk 30 minutes or more per day than were those without a rail system. From 2001 to 2009, the estimated number of transit walkers rose from 7.5 million to 9.6 million (a 28% increase); those whose transit-associated walking time was 30 minutes or more increased from approximately 2.6 million to 3.4 million (a 31% increase). Transit walking contributes to meeting physical activity recommendations. Study results may contribute to transportation-related health impact assessment studies evaluating the impact of proposed transit systems on physical activity, potentially influencing transportation planning decisions.

  8. Fuel Savings and Aerodynamic Drag Reduction from Rail Car Covers

    Science.gov (United States)

    Storms, Bruce; Salari, Kambiz; Babb, Alex

    2008-01-01

    The potential for energy savings by reducing the aerodynamic drag of rail cars is significant. A previous study of aerodynamic drag of coal cars suggests that a 25% reduction in drag of empty cars would correspond to a 5% fuel savings for a round trip [1]. Rail statistics for the United States [2] report that approximately 5.7 billion liters of diesel fuel were consumed for coal transportation in 2002, so a 5% fuel savings would total 284 million liters. This corresponds to 2% of Class I railroad fuel consumption nationwide. As part of a DOE-sponsored study, the aerodynamic drag of scale rail cars was measured in a wind tunnel. The goal of the study was to measure the drag reduction of various rail-car cover designs. The cover designs tested yielded an average drag reduction of 43% relative to empty cars corresponding to an estimated round-trip fuel savings of 9%.

  9. The influence of service planning decisions on rail transit success or failure.

    Science.gov (United States)

    2009-06-01

    Some United States metropolitan areas with rail transit systems enjoy ridership and productivity success while : others do not. This study examines the experiences of 11 U.S. metropolitan areas with between onr million and : five million persons to b...

  10. Highway-rail intersection GPS-based in-vehicle warning systems - literature review and recommendations.

    Science.gov (United States)

    2012-12-31

    In 2008, there were 2,395 incidents at highway-rail intersections (level crossings) in the United States, resulting in 939 injuries and 287 fatalities. Crossing elimination, grade separation, and the implementation of traditional warning devices are ...

  11. A survey of wheel-rail contact models for rail vehicles

    Science.gov (United States)

    Meymand, Sajjad Z.; Keylin, Alexander; Ahmadian, Mehdi

    2016-03-01

    Accurate and efficient contact models for wheel-rail interaction are essential for the study of the dynamic behaviour of a railway vehicle. Assessment of the contact forces and moments, as well as contact geometry provide a fundamental foundation for such tasks as design of braking and traction control systems, prediction of wheel and rail wear, and evaluation of ride safety and comfort. This paper discusses the evolution and the current state of the theories for solving the wheel-rail contact problem for rolling stock. The well-known theories for modelling both normal contact (Hertzian and non-Hertzian) and tangential contact (Kalker's linear theory, FASTSIM, CONTACT, Polach's theory, etc.) are reviewed. The paper discusses the simplifying assumptions for developing these models and compares their functionality. The experimental studies for evaluation of contact models are also reviewed. This paper concludes with discussing open areas in contact mechanics that require further research for developing better models to represent the wheel-rail interaction.

  12. Non-steady state modeling of wheel-rail contact problem

    OpenAIRE

    Guiral, A.; Alonso, A.; Baeza González, Luis Miguel; Giménez, J.G.

    2013-01-01

    Among all the algorithms to solve the wheel–rail contact problem, Kalker's FastSim has become the most useful computation tool since it combines a low computational cost and enough precision for most of the typical railway dynamics problems. However, some types of dynamic problems require the use of a non-steady state analysis. Alonso and Giménez developed a non-stationary method based on FastSim, which provides both, sufficiently accurate results and a low computational cost. However, it pre...

  13. Operations Research Approaches to Asset Management in Freight Rail

    DEFF Research Database (Denmark)

    Gorman, Michael F.; Harrod, Steven

    2011-01-01

    This article describes operations research methodologies as they apply to asset management in freight rail. We describe state-of-the-art methods for locomotive, crew, railcar, line and yard planning and management. We conclude with emerging areas of research in rail.......This article describes operations research methodologies as they apply to asset management in freight rail. We describe state-of-the-art methods for locomotive, crew, railcar, line and yard planning and management. We conclude with emerging areas of research in rail....

  14. INFRASTRUCTURE IN RAIL TRANSPORT IN BRAZIL

    Directory of Open Access Journals (Sweden)

    Debora Brito dos Santos

    2018-03-01

    Full Text Available Rail transport is the second mode most used in the country, due to the low cost of transporting large volumes over long distances. Although there was no investment in the expansion for a long time, after privatization there was a resumption of maintenance and expansion of the railways, but it is far from achieving international quality and performance indices. The objective of this work was a study on the rail transport in the country, to raise the structure of the Brazilian railway network. For the development of this article, the method used was bibliographic research in books, articles and websites. Although the Brazilian railway network is just over 12% of the railroad network in the United States, after the privatization of the sector, growth has resumed. The Bioceanic, a railroad that will connect the Atlantic Ocean to the Pacific Ocean, will improve the flow of agricultural production to overseas

  15. Barriers to and enablers for European rail freight transport for integrated door-to-door logistics service. Part 2: Enablers for multimodal rail freight transport

    Directory of Open Access Journals (Sweden)

    Dewan Md Zahurul ISLAM

    2014-12-01

    Full Text Available The objective of this paper is to examine and identify barriers to and enablers for the European rail freight transport services as a transport chain partner along the supply chains in the changing market scenario. The changing market scenario includes, among others, requiring 'door-to-door' rather than 'terminal to terminal' and integrated service, competitive ability to attract non-rail cargo type, changes in the customer requirements (e.g. reliable service and changes in the operational requirements and practices. Using a literature review method, the paper is presented in two parts. The part 1 focuses on the identification of barriers to the European rail freight service by reviewing freight logistics services for global supply chains followed by the current performance of European rail freight transport followed by a discussion on the rail freight market liberalisation in Europe. Then rail freight transport in the Unites States (U.S. is discussed. The research notes that although the background, scope and necessity for reform measures in Europe differ from those of the U.S., some lessons can be learned and the main lesson is that an appropriate reform measure can enhance rail sector competitive ability in Europe. The part 2 of the paper is dedicated to recommend some concrete steps and actions as enablers to remove the barriers identified in the part 1 to develop multimodal rail freight transport. The enablers for multimodal rail freight transport include: •\tEuropean rail freight transport market needs full liberalisation so that incumbent and new entrants can compete freely. •\tThe rail operators need to acquire service (e.g. customer tailored services, door to door service quality offered by road freight operators. •\tThey need to conduct a combination of ‘terminal-to-terminal’ and door-to-door operations, as and when needed; •\tThey must build partnership with freight forwarder or 3PLs to include all types of customers

  16. Linear friction welding for constructing and repairing rail for high speed and intercity passenger service rail : final report.

    Science.gov (United States)

    2016-08-01

    This project developed a solid-state welding process based on linear friction welding (LFW) technology. While resistance flash welding or : thermite techniques are tried and true methods for joining rails and performing partial rail replacement repai...

  17. Barriers to and enablers for European rail freight transport for integrated door-to-door logistics service. Part 1: Barriers to multimodal rail freight transport

    Directory of Open Access Journals (Sweden)

    Dewan Md Zahurul ISLAM

    2014-09-01

    Full Text Available The objective of this paper is to examine and identify barriers to and enablers for the European rail freight transport services as a transport chain partner along the supply chains in the changing market scenario. The changing market scenario includes, among others, requiring 'door-to-door' rather than 'terminal to terminal' and integrated service, competitive ability to attract non-rail cargo type, changes in the customer requirements (e.g. reliable service and changes in the operational requirements and practices. Using a literature review method, the paper is presented in two parts. The part 1 focuses on the identification of barriers to the European rail freight service by reviewing freight logistics services for global supply chains followed by the current performance of European rail freight transport followed by a discussion on the rail freight market liberalisation in Europe. Then rail freight transport in the Unites States (U.S. is discussed. The research notes that although the background, scope and necessity for reform measures in Europe differ from those of the U.S., some lessons can be learned and the main lesson is that an appropriate reform measure can enhance rail sector competitive ability in Europe. Examining and identifying the barriers in the part 1 (with the pan-Pacific examples of rail freight transports, the part 2 of the paper focuses on recommending clear actions and steps as enablers for the rail freight industry in general and operators in particular. The research in part 1 of the paper finds that: •\tIn many European countries, the rail freight market is not fully liberalised. In such market segment, infrastructure managers do act independently for incumbents and new entrant operators that hamper the progress of building a competitive market; •\tThe rail operators have not yet achieved the service quality (e.g. customer tailored service needed for the modern supply chains; •\tThey operate

  18. RailSiTe® (Rail Simulation and Testing

    Directory of Open Access Journals (Sweden)

    Martin Johne

    2016-10-01

    Full Text Available RailSiTe® (Rail Simulation and Testing is DLR’s rail simulation and testing laboratory (see Figure 1. It is the implementation of a fully modular concept for the simulation of on-board and trackside control and safety technology. The RailSiTe® laboratory additionally comprises the RailSET (Railway Simulation Environment for Train Drivers and Operators human-factors laboratory, a realistic environment containing a realistic train mockup including 3D simulation.

  19. Evaluating the attractiveness of a new light rail extension: Testing simple change and displacement change hypotheses.

    Science.gov (United States)

    Werner, Carol M; Brown, Barbara B; Tribby, Calvin P; Tharp, Doug; Flick, Kristi; Miller, Harvey J; Smith, Ken R; Jensen, Wyatt

    2016-01-01

    Many communities in the United States have been adding new light rail to bus-predominant public transit systems. However, there is disagreement as to whether opening light rail lines attracts new ridership or merely draws ridership from existing transit users. We study a new light rail line in Salt Lake City, Utah, USA, which is part of a complete street redevelopment. We utilize a pre-test post-test control group quasi-experimental design to test two different measures of ridership change. The first measure is calculated from stops along the light rail route; the second assumes that nearby bus stops might be displaced by the rail and calculates ridership change with those stops included as baseline. Both the simple measure (transit use changes on the complete street light rail corridor) and the "displacement" measure (transit use changes in the one-quarter mile catchment areas around new light rail stops) showed significant ( p rail bus users. In particular, the displacement analysis discredits a common challenge that when a new light rail line opens, most passengers are simply former bus riders whose routes were canceled in favor of light rail. The study suggests that light rail services can attract additional ridership to public transit systems. In addition, although pre-post control-group designs require time and effort, this project underscores the benefits of such quasi-experimental designs in terms of the strength of the inferences that can be drawn about the impacts of new transit infrastructure and services.

  20. 75 FR 16552 - High-Speed Intercity Passenger Rail (HSIPR) Program

    Science.gov (United States)

    2010-04-01

    ...; Enhancing intercity travel options; Ensuring a state of good repair of key intercity passenger rail assets... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration High-Speed Intercity Passenger Rail... selections for the High-Speed Intercity Passenger Rail (HSIPR) Program. This notice builds on the program...

  1. Ten years of common-rail injection systems for passenger cars; Gemeine Drucksache. Zehn Jahre Common-Rail-Einspritzsystem fuer Pkw

    Energy Technology Data Exchange (ETDEWEB)

    Hohenthal, M.Y. von

    2007-07-15

    The future of the diesel engine started in 1997 with the Bosch common rail injection system which provided higher power, higher rotary momentum, lower consumption, lower noise and lower pollutant emissions. Since then, high-pressure common-rail injection systems have become state of the art. (orig.)

  2. Rail renaissance based on strategic market segmentation principles

    African Journals Online (AJOL)

    rail renaissance, market segmentation, South Africa, state of logistics, ... The modal imbalance is the result of a historical rail investment backlog, with ..... vector that can be thought of as a chromosome in genetic terms, while the values used.

  3. Long-term User and Community Impacts of High-speed Rail in the United States’ Midwest Corridor

    Directory of Open Access Journals (Sweden)

    Jeffrey C. Peters

    2014-09-01

    Full Text Available This study contributes new insights in the debate over the viability of high-speed rail (HSR in the United States and the value proposition for government investment. The modeling focus of this study is two-fold, and the modeling approach makes a case for a fundamental shift from the current perspective of HSR viability. First, the user and community impact assessment of HSR is conducted in the same manner as traditional transportation system evaluation (i.e., vehicle operating costs (VOC, travel time, safety, emissions, and energy consumption to provide comparable conclusions regarding intercity transportation alternatives. Second, the model presented in this study analyzes both ridership and impacts within the same systematic framework to assess the long-term impacts on the individual transportation modes, total system metrics, and efficacy of alternate policies. Using this model, decision-makers can introduce various externalities to determine both the ideal and problematic conditions for the viability of a new HSR system.

  4. 77 FR 33560 - Woodland Rail, LLC-Acquisition and Operation Exemption-Line of Maine Central Railroad Co.

    Science.gov (United States)

    2012-06-06

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35628] Woodland Rail, LLC... United States. The end points of the Line are at engineering station 64+17 in Baileyville and engineering... Woodland Junction, Me., which is engineering station 363+45, and engineering station 393+37, and another...

  5. High Speed Rail Learning System (HSRLS – Taking Advantage of Online Technologies in Railway Education

    Directory of Open Access Journals (Sweden)

    Pasi T. Lautala, Ph.D., P.E.

    2015-06-01

    Full Text Available The United States has taken initial steps toward developing a high speed rail (HSR network, but the domestic workforce experience and institutional knowledge necessary for the planning, design, construction, and operations of HSR is underdeveloped. This paper describes and provides preliminary assessment of the High Speed Rail Learning System (HSRLS, a demonstration project that seeks to address gaps in HSR knowledge and skills in the US. The HSRLS developers designed an online education system to serve as a clearinghouse for rail-related information and content, connect teachers, trainers, and students at pre-, and postgraduate levels, and to collect demographic and professional information on groups and individuals interested in HSR. The paper explores the technology review, selection process, and content developed. Website visits and demographic information from over 4,000 unique individuals and 600 HSRLS course registrations are analyzed and assessed.

  6. The latest technical solutions in rail vehicles drives

    Directory of Open Access Journals (Sweden)

    Andrzejewski Maciej

    2017-01-01

    Full Text Available The article discusses the latest trends and solutions used in the offers of rail vehicles manufacturers. The study is mainly concerned with the technical solutions used in hybrid rail vehicles, whose development has become one of the priorities for the development of rail vehicles in the European Union in recent years. Stricter emissions standards for harmful compounds in the European Union have forced manufacturers to use increasingly sophisticated technology, including hybrid drives and alternative fuels. The products and solutions offered by the major manufacturers on the market, along with their capabilities and future applications are described. The predicted trends in the development of propulsion technology for rail and road-rail vehicles are also indicated in view of the current legislative aspirations among the EU Member States.

  7. A symmetrical rail accelerator

    International Nuclear Information System (INIS)

    Igenbergs, E.

    1991-01-01

    This paper reports on the symmetrical rail accelerator that has four rails, which are arranged symmetrically around the bore. The opposite rails have the same polarity and the adjacent rails the opposite polarity. In this configuration the radial force acting upon the individual rails is significantly smaller than in a conventional 2-rail configuration and a plasma armature is focussed towards the axis of the barrel. Experimental results indicate a higher efficiency compared to a conventional rail accelerator

  8. 77 FR 65937 - Pioneer Railcorp-Continuation in Control Exemption-Rail Switching Services, Inc.

    Science.gov (United States)

    2012-10-31

    ... control of Rail Switching Services, Inc. (RSS), upon RSS's becoming a Class III rail carrier. \\1\\ Pioneer states that it owns 100% of the common stock of its 17 Class III rail carrier subsidiaries: West Michigan...--Continuation in Control Exemption--Rail Switching Services, Inc. Pioneer Railcorp (Pioneer) and its...

  9. Rails on Windows

    CERN Document Server

    Hibbs, Curt

    2007-01-01

    It's no secret that the entire Ruby onRails core team uses OS X as their preferreddevelopment environment. Becauseof this, it is very easy to findauthoritative information on the webabout using Rails on OS X. But the truthis that Windows developers using Railsprobably outnumber those using otherplatforms. A Windows development environmentcan be just as productive asany other platform. This is a guide to developing with Rubyon Rails under Windows. It won't teachyou how to write Ruby on Rails web applications,but it will show you what toolsto use and how to set them up to createa complete Rail

  10. The projected environmental impacts of transportation of radioactive material to the first United States repository site

    International Nuclear Information System (INIS)

    Cashwell, J.W.; Neuhauser, K.S.; Reardon, P.C.; McNair, G.W.

    1987-01-01

    The relative national environmental impacts of transporting spent fuel and other nuclear wastes to each of 9 candidate repository sites in the United States were analyzed for the 26-year period of repository operation. Two scenarios were examined for each repository: 1) shipment of 5-year-old spent fuel and Defence High-Level Waste (DHLW) directly from their points of origin to a repository (reference case); and 2) shipment of 5-year-old spent fuel to a Monitored Retrievable Storage (MRS) facility and shipment (by dedicated rail) of 10-year-old consolidated spent fuel from the MRS to a repository. Transport by either all truck or all rail from the points of origin were analyzed as bounding cases. The computational system used to analyze these impacts included the WASTES II logistics code and the RADTRAN III risk analysis code. The radiological risks for the reference case increased as the total shipment miles to a repository increased for truck; the risks also increased with mileage for rail but at a lower rate. For the MRS scenario the differences between repository sites were less pronounced for both modal options, because of the reduction in total shipment miles possible with the large dedicated rail casks. All the risks reported are small in comparison to the radiological risks due to 'natural background'

  11. The radiological impact of the normal rail transport of radioactive materials in the United Kingdom

    International Nuclear Information System (INIS)

    Mairs, J.H.

    1983-01-01

    Recently the NRPB, under contract to the Health and Safety Executive, and in association with the British Railways Board, has assessed the radiological impact of consignments transported on the British Rail system. The work has shown the radiation exposure of British Rail staff and of the public to be low. This paper identifies the types of radioactive materials transported by rail, outlines the methods used to assess the doses to persons exposed and presents the results of these assessments. (author)

  12. Non-steady state modelling of wheel-rail contact problem

    Science.gov (United States)

    Guiral, A.; Alonso, A.; Baeza, L.; Giménez, J. G.

    2013-01-01

    Among all the algorithms to solve the wheel-rail contact problem, Kalker's FastSim has become the most useful computation tool since it combines a low computational cost and enough precision for most of the typical railway dynamics problems. However, some types of dynamic problems require the use of a non-steady state analysis. Alonso and Giménez developed a non-stationary method based on FastSim, which provides both, sufficiently accurate results and a low computational cost. However, it presents some limitations; the method is developed for one time-dependent creepage and its accuracy for varying normal forces has not been checked. This article presents the required changes in order to deal with both problems and compares its results with those given by Kalker's Variational Method for rolling contact.

  13. 31 CFR 515.321 - United States; continental United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 515.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including the Trust Territory of...

  14. 31 CFR 500.321 - United States; continental United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 500.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including U.S. trust territories...

  15. 31 CFR 535.321 - United States; continental United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 535.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof including the Trust Territory of...

  16. Electrodynamic wear of rails in high current density rail gun discharges

    International Nuclear Information System (INIS)

    Edwards, W.T.; Caldwell, S.G.

    1984-01-01

    Significant advances in high current, high speed power sources, has in recent years allowed rail guns to produce very high velocity (> 10 km/sec) macroscopic particles (> 1/10 grams). A continuing problem is the structural integrity of the components under these loadings and in particular, the rail wear due to the high current density plasma contacts. In this investigation a small bore rail gun (6x5 mm) was used with a 10.6 kjoule capacitor energy source to examine the modes of rail damage. The rails were constructed of 110 copper base material. These rails were used in an uncoated condition and also with plasma sprayed coatings of W and W/WC. The resulting surface wear was characterized by standard metallurgical techniques and analyzed for the various coatings

  17. California statewide model for high-speed rail

    OpenAIRE

    Outwater, Maren; Tierney, Kevin; Bradley, Mark; Sall, Elizabeth; Kuppam, Arun; Modugala, Vamsee

    2010-01-01

    The California High Speed Rail Authority (CHSRA) and the Metropolitan Transportation Commission (MTC) have developed a new statewide model to support evaluation of high-speed rail alternatives in the State of California. This statewide model will also support future planning activities of the California Department of Transportation (Caltrans). The approach to this statewide model explicitly recognizes the unique characteristics of intraregional travel demand and interregional travel demand. A...

  18. Impact of the rail-pad multi-discrete model upon the prediction of the rail response

    Science.gov (United States)

    Mazilu, T.; Leu, M.

    2017-08-01

    Wheel/rail vibration has many technical effects such as wear of the rolling surfaces, rolling noise, settlement of the ballast and subgrade etc. This vibration is depending on the rail pad characteristic and subsequently, it is important to have an accurate overview on the relation between the rail pad characteristic and the level of the wheel/rail vibration. To this end, much theoretical and experimental research has been developed in the past, and for the theoretical approach the track model, in general, and, particularly, the rail pad model is of crucial importance. Usually, the rail pad model is discrete model one, neglecting the length of the rail pad. This fact is questionable because the sleepers span is only 4 times the rail pad length. Using the rail pad discrete model, the rail response is overestimated when the frequency of the excitation equals the pinned-pinned resonance frequency. In this paper, a multi-discrete model for the rail pad, consisting in many Kelvin-Voigt parallel systems, is inserted into an analytical model of the track. The track model is reduced to a rail taken as infinite Timoshenko beam, discretely supported via rail pad, sleeper and ballast. The influence of the number of Kelvin-Voigt systems of the rail pad model on the rail response is analysed.

  19. Determination of the primary technical parameters of the test bench for controlling the temperature of rails and rail bars of continuous welded rail

    Directory of Open Access Journals (Sweden)

    Tertychnyi Vitalii

    2017-01-01

    Full Text Available One of the most important factors determining the reliability and safety of operation of the continuous welded rail track is the temperature of the rails. All conditions of laying, repair and maintenance of the track during the entire cycle of rails operation depend on it. The existing rail temperature monitoring method does not take into account a few significant factors and that leads to significant errors in determining the actual temperature of the rail bar. The authors propose a new rail temperature measurement method on a special test bench which maximally simulates possible environmental operating conditions for the rail bars, the profile of the roadway (embankment or cut, as well as the actual spatial latitude and meridian location of the rail slabs. At the bench, the studied rails are fastened with the help of rail braces on half ties, in the ballast bed, with sizes in accordance with the existing reference documents. At the first stage, the most common KB-65 intermediate fastener for the continuous welded rail in Ukraine will be used, while in subsequent stages KPP-5 fastening will be used.

  20. Managing rail service life

    Directory of Open Access Journals (Sweden)

    Z. Popović

    2014-10-01

    Full Text Available The service life of rails depends especially on the operational loads and speeds on the railway lines, as well as on the rail maintenance policy. There are multiple aspects of rail maintenance optimization. The following article considers optimisation of rail maintenance activities relating to rail head surface condition in order to reduce corrective work on track geometry, as well as to minimize the overall costs for track maintenance. The objects of this research are issues and challenges related to rail and track maintenance in curves on modern conventional railway lines for mixed traffic.

  1. Rail passengers rights

    Directory of Open Access Journals (Sweden)

    Đurđev Dušanka J.

    2016-01-01

    Full Text Available The legal framework of rail passengers rights is set out in a combination of international and European law: an international measure, the rather unwieldy Uniform Rules concerning the Contract for International Carriage of Passengers and Luggage by Rail, forming part of the Convention concerning International Carriage by Rail of 9 May 1980 (as amended by the Vilnius Protocol of 3 June 1999 ['CIV'], lays down a basic framework which is then fleshed out by more recent EU legislation, Regulation (EC No 1371/2007 on Rail Passengers ' Rights and Obligations. Regulation 1371/2007/EC on rail passenger rights and obligations sets out minimum quality standards that have to be guaranteed to all passengers on all lines. .

  2. Rail for inspection/maintenance device in TOKAMAK type container of a thermonuclear reactor

    International Nuclear Information System (INIS)

    Takahashi, Kenji.

    1996-01-01

    A circular rail divided into four arcuate parts for an inspection/maintenance device which runs in a TOKAMAK type container is disposed. Each of the divided rails is supported at the center of the outer surface rotatably by extendable rail supporting shafts. Each of the divided rail is constituted such that it can be contained between limiters disposed at the outer side of the TOKAMAK container when each of the rail support shafts is contracted. With such a constitution, each of the rail support shafts and arcuate rail is contracted and rotated from the outside of the TOKAMAK type container by an actuator. In order to form a circular rail, each of the rail support shafts is extended toward the center of the TOKAMAK type container, and then each of the arcuate rails is rotated into a horizontal state. Then, the joint portions of each of the arcuate rails are connected by using remote controllable locking rods. (I.S.)

  3. Fall Protection Procedures for Sealing Bulk Waste Shipments by Rail Cars at Formerly Utilized Sites Remedial Action Program (FUSRAP) Sites - 13509

    Energy Technology Data Exchange (ETDEWEB)

    Boyle, J.D. [U.S. Army Corps of Engineers - Buffalo District, Buffalo, New York 14207 (United States); Fort, E. Joseph; Lorenz, William [Cabrera Services (Cabrera) East Harford, CT 06108 (United States); Mills, Andy [Shaw Environmental and Infrastructure, Inc. (Shaw) Baton Rouge, LA 70809 (United States)

    2013-07-01

    Rail-cars loaded with radioactive materials must be closed and fastened to comply with United States Department of Transportation (DOT) requirements before they shipped. Securing waste shipments in a manner that meets these regulations typically results in the use of a sealable rail-car liner. Workers accessing the tops of the 2.74 m high rail-cars to seal and inspect liners for compliance prior to shipment may be exposed to a fall hazard. Relatively recent revisions to the Fall Protection requirements in the Safety and Health Requirements Manual (EM385-1-1, U.S. Army Corps of Engineers) have necessitated modifications to the fall protection systems previously employed for rail-car loading at Formerly Utilized Sites Remedial Action Program (FUSRAP) sites. In response these projects have developed site-specific procedures to protect workers and maintain compliance with the improved fall protection regulations. (authors)

  4. Some design aspects of a two-stage rail-to-rail CMOS op amp

    NARCIS (Netherlands)

    Gierkink, Sander L.J.; Holzmann, Peter J.; Wiegerink, Remco J.; Wassenaar, R.F.

    1999-01-01

    A two-stage low-voltage CMOS op amp with rail-to-rail input and output voltage ranges is presented. The circuit uses complementary differential input pairs to achieve the rail-to-rail common-mode input voltage range. The differential pairs operate in strong inversion, and the constant

  5. Rapanos v. United States & Carabell v. United States

    Science.gov (United States)

    Documents associated with guidance for implementing the definition of waters of the United States under the Clean Water Act following the Rapanos v. United States, and Carabell v. United States Supreme Court decision.

  6. Preliminary rail access study

    International Nuclear Information System (INIS)

    1990-01-01

    The Yucca Mountain site, located on the southwestern edge of the Nevada Test Site, is an undeveloped area under investigation as a potential site for nuclear waste disposal by the US Department of Energy. The site currently lacks rail service and an existing rail right-of-way. If the site is suitable and selected for development as a disposal site, rail service is desirable to the Office of Civilian Radioactive Waste Management Program because of the potential of rail to reduce number of shipments and costs relative to highway transportation. This preliminary report is a summary of progress to date for activities to identify and evaluate potential rail options from major rail carriers in the region to the Yucca Mountain site. It is currently anticipated that the rail spur will be operational after the year 2000. 9 refs., 13 figs., 2 tabs

  7. Standard practice for determining rail-to-Earth resistance

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 This practice covers the procedures necessary to follow for measuring resistance-to-earth of the running rails which are used as the conductors for returning the train operating current to the substation in electric mass transit systems. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  8. The experimental determination of the relationship between the energising time of the common rail injector and the set fuel quantity and rail pressure

    Directory of Open Access Journals (Sweden)

    Pietras Dariusz

    2017-01-01

    Full Text Available The article discusses the issue of experimentally determining the relationship between the energising time of the common rail electromagnetic injector and the set fuel quantity and rail pressure. Experimental studies according to the assumed methodology were made on a test bench enabling the dynamic flow rate measurement of the injector. The fuel system mounted on the test bench was controlled by the laboratory CI engine control unit based on the original concept of one of the authors of the article. The results of the experimental studies have made it possible to determine many of the characteristics of the fuel flow rate depending on the specified rail pressure and the energising time of the injector. An analysis was then performed followed by extrapolation of the obtained results. The data obtained from these analyses are the basis for the development of the energising time control algorithm based on a set fuel quantity and rail pressure.

  9. Structural response of a rail acceleration

    International Nuclear Information System (INIS)

    Wang, S.Y.

    1984-01-01

    The transient response of a 0.4 by 0.6 cm rectangular bore rail accelerator was analyzed by a three dimensional finite element code. The copper rail deflected to a peak value of 0.08 mm in compression and then oscillated at an amplitude of 0.02 mm. Simultaneously the insulating side wall of glass fabric base, epoxy resin laminate (G-10) was compressed to a peak value of 0.13 mm and rebounded to a steady state in extension. Projectile pinch or blowby due to the rail extension or compression, respectively, can be identified by examining the time history of the rail displacement. The effect of blowby was most significant at the side wall characterized by mm size displacement in compression. Dynamic stress calculations indicate that the G-10 supporting material behind the rail is subjected to over 21 MPa at which the G-10 could fail if the laminate was not carefully oriented. Results for a polycarbonate resin (Lexan) side wall show much larger displacements and stresses than for G-10. The tradeoff between the transparency of Lexan and the mechanical strength of G-10 for sidewall material is obvious. Displacement calculations from the modal method are smaller than the results from the direct integration method by almost an order of magnitude, because the high frequency effect is neglected. 12 references

  10. Implications of rail electrodynamics

    International Nuclear Information System (INIS)

    Rolader, G.E.; Jamison, K.A.

    1990-01-01

    A model is developed to investigate possible effects of rail electrodynamics on the performance of railguns. This model describes the oscillatory nature of the rail motion in response to the Lorentz force and the compressive restoration force of material which is behind the rails. In this simple model the rails are found to oscillate with a frequency of β. The rail dynamic behavior induces local electric fields. The authors investigate the significance of these electric fields on stationary particles (lab frame) and on particles moving at the velocity of the plasma/projectile system (projectile frame)

  11. Finite element analysis of rail-wheel interaction

    International Nuclear Information System (INIS)

    Rahman, F.; Kharlamov, Y.A.; Islam, S.; Khan, A.A.

    2006-01-01

    Damage mechanisms such as surface cracks, plastic deformation and wear can significantly reduce the service life of railway track and rolling stock. They also have a negative impact on the rolling noise as well as: on the riding comfort. A proper understanding of these mechanisms requires a detailed knowledge of physical interaction between wheel and rail. Furthermore, demands for higher train speeds and increased axle loads implies that the consequences of larger contact. forces between wheel and rail must be thoroughly investigated. Two methods have traditionally been used to investigate the rail-wheel contact, that is the Hertz analytical method and simplified numerical method based on the boundary element (BE) method. These methods rely on a half-space assumption and a linear material model. This paper presents that to overcome these limitations, a tool for FE-based quasistatic wheel-rail contact simulations has been developed. The tool is a library of ANSYS macro routines for configuring, meshing and loading of a parametric wheel-rail model. The meshing is based on measured wheel and rail profiles. The wheel and rail materials in the contact region are treated as elastic-plastic with kinematic hardening. By controlling the values of the configuration parameters, representations of various driving cases can be generated. The quasi-static loads are obtained from train motion. Interaction phenomena such as rolling, spinning and sidling can be included. The modeling tool and a methodology are described in the presented paper. Significant differences in the calculated state between the FE solution and the traditional approaches can be observed. These differences are most significant in situations with flange contact. (author)

  12. 75 FR 76520 - Tennessee Southern Railroad Company, Patriot Rail, LLC, Patriot Rail Holdings LLC, and Patriot...

    Science.gov (United States)

    2010-12-08

    ... family by converting two of its subsidiaries from corporations into limited liability companies: (1... Railroad Company, Patriot Rail, LLC, Patriot Rail Holdings LLC, and Patriot Rail Corp.--Corporate Family... Railroad Company (TSRR), Patriot Rail, LLC (PRL) and its subsidiaries, Patriot Rail Holdings LLC (PRH) and...

  13. Framing Light Rail Projects

    DEFF Research Database (Denmark)

    Olesen, Mette

    2014-01-01

    In Europe, there has been a strong political will to implement light rail. This article contributes to the knowledge concerning policies around light rail by analysing how local actors frame light rail projects and which rationalities and arguments are present in this decision-making process....... The article draws on the socio-technical approach to mobilities studies in order to reassemble the decision-making process in three European cases: Bergen, Angers, and Bern. This article provides insights into the political, discursive and material production of light rail mobilities in a European context....... It identifies the planning rationales behind the systems and the policies that have been supportive of this light rail vision. Finally, the article identifies the practical challenges and potentials that have been connected to the different local frames of light rail mobility which can be used in future...

  14. Identification and prioritization of rail squat defects in the field using rail magnetisation technology

    Science.gov (United States)

    Kaewunruen, Sakdirat

    2015-04-01

    Inevitably, rail squats and studs are continuing to be a serious problem for railway organisations around the world in the 21st century. They are typically classified as the growth of any cracks that have grown longitudinally through the subsurface and some of the cracks propagating to the bottom of rails transversely, and have branched from initial longitudinal cracks with a depression of rail surface. The horizontal crack, which results in a depression of rail surface, induces increased maintenance level, more frequent monitoring, compromised rail testing (as the crack shields the signal echoes), and possible broken rails. This paper presents field investigations using a magnetised-rail testing device developed by MRX Technologies to identify and prioritise the rail squats. Most of the in situ squats were found on the high rail of the transition (variable-radius curved track), which is associated with rolling contact fatigue (RCF). This investigation highlights the field performance of the MRX's surface crack detection technology in comparison with the traditional ultrasonic method and detailed walking inspection. Visually, it was found in the field that the size of the RCF squats varies from very small to moderate. The predicted crack data were obtained by scanning the magnitised rails. The comparison of the actual crack depths (ultrasonic) and the predicted crack depths (MRX device) shows: • A possible correlation for small RCF/ squat cracks. • Poor interpretation of larger defects and welds. The field assessment also suggests some practical issues required for further development, including the detection of rail spalling, deep transverse crack, welding, and so on.

  15. Bronze railing from Mediana

    Directory of Open Access Journals (Sweden)

    Vasić Miloje R.

    2003-01-01

    Full Text Available The hoard containing components of bronze railing was discovered in trench 7 during excavations at Mediana in 2000. Railing consists of cancelli and herms with busts of deities between them. Railing was constructed in such a way that it was possible to disassemble and reassemble it. Three cancelli one fragmented semicancellus cast together with herm and herms, one with bust of Aesculapius and other with bust of Luna. It could be concluded that railing consisted of two segments with passage between them. Male deities were represented on the left segment of the railing and female deities on the right segment. Detailed analysis revealed that Aesculapius as well as Luna bear strong mark of classical Greek and Hellenistic art, which experienced some kind of renaissance in the time of Constantine I. It is very probable that we can recognize the portrait of Faustina, Constantine’s wife in the portrait of Luna. According to the historical events the railing could have been produced before 325 AD when Constantine definitively accepted Christianity at Council of Nicaea. It is difficult to say where the railing had been produced. It had been most probably brought to Mediana during the stay of emperor Julian in Niš in 361. The sculptures found in one room of the villa with peristyle had probably been brought at the same time. The apse of triclinium of this villa had most likely been arranged as small shrine with bronze railing at its entrance. The railing was buried in 378 after battle of Adrianople and invasion of Goths in diocese Dacia.

  16. A low-voltage Op Amp with rail-to-rail constant-gm input stage and a class AB rail-to-rail output stage

    NARCIS (Netherlands)

    Botma, J.H.; Wassenaar, R.F.; Wiegerink, Remco J.

    1993-01-01

    In this paper a low-voltage two-stage Op Amp is presented. The Op Amp features rail-to-rail operation and has an @put stage with a constant transconductance (%) over the entire common-mode input range. The input stage consists of an n- and a PMOS differential pair connected in parallel. The constant

  17. Rail vehicle dynamics

    CERN Document Server

    Knothe, Klaus

    2017-01-01

    This book on the dynamics of rail vehicles is developed from the manuscripts for a class with the same name at TU Berlin. It is directed mainly to master students with pre-knowledge in mathematics and mechanics and engineers that want to learn more. The important phenomena of the running behaviour of rail vehicles are derived and explained. Also recent research results and experience from the operation of rail vehicles are included. One focus is the description of the complex wheel-rail contact phenomena that are essential to understand the concept of running stability and curving. A reader should in the end be able to understand the background of simulation tools that are used by the railway industry and universities today.

  18. Návrh Rail-to-Rail proudového konvejoru v technologii CMOS

    OpenAIRE

    Hudzik, Martin

    2016-01-01

    Diplomová práca sa zaoberá návrhom rail-to-rail prúdového konvejora druhej generácie v technológii CMOS. Opisuje princípy funkcie jednotlivých generácii prúdových konvejorov a taktiež základný princíp návrhu prúdového konvejora druhej generácie založeného na operačnom zosilňovači. Venuje sa obvodovému riešeniu vstupného rail-to-rail stupňa a koncového stupňa v triede AB. Cieľom tejto práce je navrhnúť, charakterizovať vlastnosti a vytvoriť topológiu prúdového konvejora druhej generácie s rail...

  19. Design of Low Voltage Low Power CMOS OP-AMPS with Rail-to-Rail Input/Output Swing

    OpenAIRE

    Gopalaiah, SV; Shivaprasad, AP; Panigrahi, Sukanta K

    2004-01-01

    A novel input and output biasing circuit to extend the input common mode (CM) voltage range and the output swing to rail-to-rail in a low voltage op-amp in standard CMOS technology is presented. The input biasing circuit uses a Switched Capacitor Based Attenuator (SCBA) approach to establish rail-to-rail common mode input voltage range. And the output biasing circuit uses an Output Driver (OD), with floating bias to give the rail-to-rail swing at output stage. Three different OD schemes in op...

  20. Simply rails 2 the ultimate beginner's guide to Ruby on rails

    CERN Document Server

    Lenz, Patrick

    2008-01-01

    Want to learn all about Ruby on Rails 2.0, the web application framework that is inspiring developers around the world? The second edition of this practical, hands on book will: show you how to install Ruby on Rails on Windows, Mac, or Linux walk you, step by step, through the development of a Web 2.0 social news application, just like digg.com show you how to test, debug, benchmark, and deploy your Rails application Unlike other Rails books, this book doesn't assume that you are an experienced web developer, or that you've used Ruby before. An entire chapter is devoted to learning Ruby in a fun way, using the interactive Ruby console, so you can follow along at home. You'll be an accomplished Ruby programmer in no time! The example application that the book builds - a user-generated news web site - is built upon with each following chapter, and concepts such as sessions, cookies and basic AJAX usage are gradually introduced. Different aspects of Rails, such as user authentication, session cookies, and automa...

  1. Evaluating autonomous acoustic surveying techniques for rails in tidal marshes

    Science.gov (United States)

    Stiffler, Lydia L.; Anderson, James T.; Katzner, Todd

    2018-01-01

    There is a growing interest toward the use of autonomous recording units (ARUs) for acoustic surveying of secretive marsh bird populations. However, there is little information on how ARUs compare to human surveyors or how best to use ARU data that can be collected continuously throughout the day. We used ARUs to conduct 2 acoustic surveys for king (Rallus elegans) and clapper rails (R. crepitans) within a tidal marsh complex along the Pamunkey River, Virginia, USA, during May–July 2015. To determine the effectiveness of an ARU in replacing human personnel, we compared results of callback point‐count surveys with concurrent acoustic recordings and calculated estimates of detection probability for both rail species combined. The success of ARUs at detecting rails that human observers recorded decreased with distance (P ≤ 0.001), such that at 75 m, only 34.0% of human‐detected rails were detected by the ARU. To determine a subsampling scheme for continuous ARU data that allows for effective surveying of presence and call rates of rails, we used ARUs to conduct 15 continuous 48‐hr passive surveys, generating 720 hr of recordings. We established 5 subsampling periods of 5, 10, 15, 30, and 45 min to evaluate ARU‐based presence and vocalization detections of rails compared with each of the full 60‐min sampling of ARU‐based detection of rails. All subsampling periods resulted in different (P ≤ 0.001) detection rates and unstandardized vocalization rates compared with the hourly sampling period. However, standardized vocalization counts from the 30‐min subsampling period were not different from vocalization counts of the full hourly sampling period. When surveying rail species in estuarine environments, species‐, habitat‐, and ARU‐specific limitations to ARU sampling should be considered when making inferences about abundances and distributions from ARU data. 

  2. Head first rails a learner's companion to ruby on rails

    CERN Document Server

    Griffiths, David

    2009-01-01

    Ready to transport your web applications into the Web 2.0 era? Head First Rails takes your programming -- and productivity -- to the max. You'll learn everything from the fundamentals of Rails scaffolding to building customized interactive web apps using Rails' rich set of tools and the MVC framework. By the time you're finished, you'll have learned more than just another web framework. You'll master database interactions, integration with Ajax and XML, rich content, and even dynamic graphing of your data -- all in a fraction of the time it takes to build the same apps with Java, PHP, ASP.NE

  3. Scheduling freight trains in rail-rail transshipment yards

    OpenAIRE

    Nils Boysen; Erwin Pesch

    2008-01-01

    Transshipment yards, where gantry cranes allow for an effcient transshipment of containers between different freight trains, are important entities in modern railway systems and facilitate the general shift from point-to-point transport to hub-and-spoke railway systems. Modern rail-rail transshipment yards accelerate container handling, so that multiple smaller trains with equal destination can be consolidated to a reduced number of trains without jeopardizing on time deliveries. An important...

  4. Rail inspection of RCF defects

    Directory of Open Access Journals (Sweden)

    Z. Popović

    2013-10-01

    Full Text Available Rail defects due to rolling contact fatigue (RCF threaten the traffic safety around the world. That hazard is more distinct on railways without adequate maintenance strategy. Realization of interoperability of European railway network demands from every infrastructure manager to have a maintenance plan for the infrastructure subsystem. Besides that, this plan includes rail inspection and strategy against RCF defects. This paper emphasizes the importance of rail inspection and early detection of RCF because the most of RCF crack should be removed in rail grinding campaigns (preventive, cyclical and corrective activities during the whole rail service life.

  5. Light rail project in Copenhagen

    DEFF Research Database (Denmark)

    Andersen, Jonas Lohmann Elkjær; Landex, Alex; Nielsen, Otto Anker

    2006-01-01

    The need for high class public transport service of the increasing travel across the radial urban structure of the greater Copenhagen region was examined through planning of a light rail. The exact corridor (defined as the Ring 2½ corridor) and alignment of the light rail were documented and the ......The need for high class public transport service of the increasing travel across the radial urban structure of the greater Copenhagen region was examined through planning of a light rail. The exact corridor (defined as the Ring 2½ corridor) and alignment of the light rail were documented...... light rail projects...

  6. Optimal energy management of urban rail systems: Key performance indicators

    International Nuclear Information System (INIS)

    González-Gil, A.; Palacin, R.; Batty, P.

    2015-01-01

    Highlights: • An overall picture of urban rail energy use is provided. • Performance indicators are developed for urban rail system energy optimisation. • A multi-level methodology for assessing energy efficiency measures is presented. - Abstract: Urban rail systems are facing increasing pressure to minimise their energy consumption and thusly reduce their operational costs and environmental impact. However, given the complexity of such systems, this can only be effectively achieved through a holistic approach which considers the numerous interdependences between subsystems (i.e. vehicles, operations and infrastructure). Such an approach requires a comprehensive set of energy consumption-related Key Performance Indicators (KEPIs) that enable: a multilevel analysis of the actual energy performance of the system; an assessment of potential energy saving strategies; and the monitoring of the results of implemented measures. This paper proposes an original, complete list of KEPIs developed through a scientific approach validated by different stakeholders. It consists of a hierarchical list of 22 indicators divided into two levels: 10 key performance indicators, to ascertain the performance of the whole system and complete subsystems; and 12 performance indicators, to evaluate the performance of single units within subsystems, for example, a single rail vehicle or station. Additionally, the paper gives a brief insight into urban rail energy usage by providing an adequate context in which to understand the proposed KEPIs, together with a methodology describing their application when optimising the energy consumption of urban rail systems

  7. Evaluating autonomous acoustic surveying techniques for rails in tidal marshes

    Science.gov (United States)

    Stiffler, Lydia L.; Anderson, James T.; Katzner, Todd

    2018-01-01

    There is a growing interest toward the use of autonomous recording units (ARUs) for acoustic surveying of secretive marsh bird populations. However, there is little information on how ARUs compare to human surveyors or how best to use ARU data that can be collected continuously throughout the day. We used ARUs to conduct 2 acoustic surveys for king (Rallus elegans) and clapper rails (R. crepitans) within a tidal marsh complex along the Pamunkey River, Virginia, USA, during May–July 2015. To determine the effectiveness of an ARU in replacing human personnel, we compared results of callback point‐count surveys with concurrent acoustic recordings and calculated estimates of detection probability for both rail species combined. The success of ARUs at detecting rails that human observers recorded decreased with distance (P ≤ 0.001), such that at of human‐recorded rails also were detected by the ARU, but at >75 m, only 34.0% of human‐detected rails were detected by the ARU. To determine a subsampling scheme for continuous ARU data that allows for effective surveying of presence and call rates of rails, we used ARUs to conduct 15 continuous 48‐hr passive surveys, generating 720 hr of recordings. We established 5 subsampling periods of 5, 10, 15, 30, and 45 min to evaluate ARU‐based presence and vocalization detections of rails compared with each of the full 60‐min sampling of ARU‐based detection of rails. All subsampling periods resulted in different (P ≤ 0.001) detection rates and unstandardized vocalization rates compared with the hourly sampling period. However, standardized vocalization counts from the 30‐min subsampling period were not different from vocalization counts of the full hourly sampling period. When surveying rail species in estuarine environments, species‐, habitat‐, and ARU‐specific limitations to ARU sampling should be considered when making inferences about abundances and distributions from ARU data. 

  8. 75 FR 55631 - U. S. Rail Corporation-Construction and Operation Exemption-Brookhaven Rail Terminal

    Science.gov (United States)

    2010-09-13

    ... the proposed construction is to enable U. S. Rail to serve the BRT as a common carrier and to deliver... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35141] U. S. Rail Corporation--Construction and Operation Exemption-- Brookhaven Rail Terminal AGENCY: Surface Transportation...

  9. Historical overview of domestic spent nuclear fuel shipments in the United States

    International Nuclear Information System (INIS)

    Pope, R.B.; Wankerl, M.W.; Hamberger, C.R.; Schmid, S.P.

    1993-01-01

    The information in this paper summarized historical data on spent nuclear fuel shipments in the United States (U.S.) from the period from 1964 to 1991. Information on shipments has been developed to establish a basis for developing a transportation system in the U.S. for initiating shipments of spent nuclear fuel beginning in 1988. The paper shows that approximately 2700 power spent nuclear fuel rail and truck casks have been shipped within the U.S. during the past 28 years. In total, approximately 2000 metric tonnes of uranium (MTU) have been shipped to date, which compares with projected shipping rates of from 3000 to greater than 6000 MTU per year when the U.S. Civilian Radiation Waste Management System is in full operation. (author)

  10. Historical overview of domestic spent nuclear fuel shipments in the United States

    International Nuclear Information System (INIS)

    Pope, R.B.; Wankerl, M.W.; Hamberger, C.R.; Schmid, S.P.

    1992-01-01

    The information in this paper summarizes historical data on spent nuclear fuel shipments in the United States (US) from the period from 1964 to 1991. Information on shipments has been developed to establish a basis for developing a transportation system in the US for initiating shipments of spent nuclear fuel beginning in 1998. The paper shows that approximately 2700 power reactor spent nuclear fuel rail and truck casks have been shipped within the US during the past 28 years. In total, approximately 2000 metric tonnes of uranium (MTU) have been shipped to date, which compares with projected shipping rates of from 3000 to greater than 6000 MM per year when the US Civilian Radioactive Waste Management System is in full operation

  11. High pressure common rail injection system modeling and control.

    Science.gov (United States)

    Wang, H P; Zheng, D; Tian, Y

    2016-07-01

    In this paper modeling and common-rail pressure control of high pressure common rail injection system (HPCRIS) is presented. The proposed mathematical model of high pressure common rail injection system which contains three sub-systems: high pressure pump sub-model, common rail sub-model and injector sub-model is a relative complicated nonlinear system. The mathematical model is validated by the software Matlab and a virtual detailed simulation environment. For the considered HPCRIS, an effective model free controller which is called Extended State Observer - based intelligent Proportional Integral (ESO-based iPI) controller is designed. And this proposed method is composed mainly of the referred ESO observer, and a time delay estimation based iPI controller. Finally, to demonstrate the performances of the proposed controller, the proposed ESO-based iPI controller is compared with a conventional PID controller and ADRC. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

  12. Performance criteria for EM rail launchers with solid or transition armatures and laminated rails

    International Nuclear Information System (INIS)

    James, T.E.

    1991-01-01

    Velocity limitations of EM Rail Launchers with solid armatures due to the velocity skin-effect are assessed for a range of homogeneous materials (copper, aluminium, molybdenum and tungsten). Performance criteria as limited by armature melting in the region adjacent to the rail/armature contact surface and by rail surface melting are deduced analytically based on defined electro-thermal reference conditions. The performance criteria predict the reference transition velocity at which the solid contact surface changes to mainly a melted contact surface which is shown to be a fundamental property of the materials. The paper shows that the critical factors in obtaining a high transition velocity are a relatively high resistivity armature material combined with high temperature rail surface coatings. For example a transition velocity of >2.0 km/s for a molybdenum armature and a tungsten rail surface coating on a copper rail are predicted compared with <0.5 km/s for the aluminium/copper combination frequently used

  13. Rail-induced Traffic in China

    Directory of Open Access Journals (Sweden)

    Nan He

    2017-11-01

    Full Text Available The rapid development of China’s railway has exerted an enormous influence on the intercity passenger transport structure in recent years. However, it has not satisfied the passengers’ travel demand due to induced traffic. This paper is committed to solving such issue, with the aim of satisfying the current travel demand, and of anticipating the demand of the predicted traffic growth over the next 20 to 30 years. The paper has considered the increase in rail passenger kilometres caused by the growth of rail kilometres as rail-induced traffic. Based on the concept and former research of induced traffic, the panel data of 26 provinces and 3 municipalities of China between the year 2000 and 2014 were collected, and the elasticity models (including elasticity-based model, distributed lag model, high-speed rail (HSR elasticity model and rail efficiency model have been constructed. The results show the importance of model formation incorporation of rail-induced traffic. It is better to get the correct value in divided zones with different train frequencies or incorporation rail efficiency in cities or provinces. The lag time and rail types also need to be considered. In summary, the results analysis not only confirms the existence of rail-induced traffic, but also provides substantial recommendations to train operation planning.

  14. 46 CFR 169.329 - Storm rails.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Storm rails. 169.329 Section 169.329 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Rails and Guards § 169.329 Storm rails. Suitable storm rails or hand grabs must be...

  15. 46 CFR 177.920 - Storm rails.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Storm rails. 177.920 Section 177.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Rails and Guards § 177.920 Storm rails. Suitable storm rails or hand grabs must be...

  16. 46 CFR 127.320 - Storm rails.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Storm rails. 127.320 Section 127.320 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Rails and Guards § 127.320 Storm rails. Suitable storm rails must be installed in each passageway and at...

  17. Rail abandonments in the South and their effect on NWPA rail shipments

    International Nuclear Information System (INIS)

    1988-02-01

    The railroad industry will have a very critical role in the eventual shipping of commercial spent fuel and defense high-level waste as provided under the Nuclear Waste Policy Act of 1982 and the 1987 amendments. The transport of spent fuel is expected to be accomplished by rail from 19 of the South's 27 reactor sites to the proposed Yucca Mountain repository or possible monitored retrievable storage facility. The decline in total track availability, however, could significantly impact the federal government's transportation program. Particularly the situation of continuing abandonments may limit rail opportunities at numerous reactor locations. Commercial nuclear reactor sites have the unfortunate problem of not being located on Class I railroad mainline tracks. The reactor sites are generally located in areas with limited rail traffic and thus vulnerable to rail abandonment procedures. The general deregulation of the railroad industry under the Staggers Act of 1980 also assisted in making rail abandonment, through the Interstate Commerce Commission, a rather simple and quick process. The effects of deregulation, however, have provided alternatives to abandonment. In particular, the Staggers Act has led to an enormous surge in the growth of short line and regional railroads. Such railroads have been able to effectively operate rail lines which Class I railroads found unprofitable. The short lines and regionals were also encouraged to competitively negotiate contracts directly with shippers. While these railroads may help reduce the number of abandonment applications, they may also represent higher shipping costs. The South has experienced a great number of abandonments since the 1960's. Many of the abandonments have been significant in length and have affected areas near nuclear plants expected to ship by rail

  18. 78 FR 10581 - Rail Vehicles Access Advisory Committee

    Science.gov (United States)

    2013-02-14

    ... guideway systems (e.g., rapid rail, light rail, commuter rail, and intercity rail). We are establishing a... vehicles that operate on fixed guideway systems (e.g., rapid rail, light rail, commuter rail, and intercity... for their service. We may pay travel expenses for a limited number of persons who would otherwise be...

  19. 49 CFR 214.523 - Hi-rail vehicles.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Hi-rail vehicles. 214.523 Section 214.523..., DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY On-Track Roadway Maintenance Machines and Hi-Rail Vehicles § 214.523 Hi-rail vehicles. (a) The hi-rail gear of all hi-rail vehicles shall be inspected for...

  20. Rail-to-rail low-power fully differential OTA utilizing adaptive biasing and partial feedback

    DEFF Research Database (Denmark)

    Tuan Vu, Cao; Wisland, Dag T.; Lande, Tor Sverre

    A fully differential rail-to-rail Operational Transconductance Amplifier (OTA) with improved DC-gain and reduced power consumption is proposed in this paper. By using the adaptive biasing circuit and two differential inputs, a low stand-by current can be obtained together with reduced power...... consumption. The DC-gain of the proposed OTA is improved by adding a partial feedback loop. A Common-Mode Feedback (CMFB) circuit is required for fully differential rail-to-rail operation. Simulations show that the OTA topology has a low stand-by power consumption of 96μW and a high FoM of 3.84 [(V...

  1. THE BAINITIC STEELS FOR RAILS APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Ivo Hlavatý

    2009-10-01

    Full Text Available Actual trends of worldwide railway transport development are characterized by increasing speed and growth of railway’s axels load. Increasing load together with transverse, longitudinal wheel displacement and braking on the rails results into heavy surface tension. One of many applications for bainitic steel is in railway transport for highly strength and wear resistant rails. Rail steel must be designed to be able to resist plastic deformation, wear, rolling contact fatigue, bending stress and thermal stress during rail welding process and rails resurfacing.

  2. National Rail Network: 1:100,000 (line), Geographic WGS84, BTS (2006) [us_rail_network_100k_lin_BTS_2006

    Data.gov (United States)

    Louisiana Geographic Information Center — The Rail Network is a comprehensive database of the nation's railway system at the 1:100,000 scale. The data set covers all 50 States plus the District of Columbia.

  3. A new solution method for wheel/rail rolling contact.

    Science.gov (United States)

    Yang, Jian; Song, Hua; Fu, Lihua; Wang, Meng; Li, Wei

    2016-01-01

    To solve the problem of wheel/rail rolling contact of nonlinear steady-state curving, a three-dimensional transient finite element (FE) model is developed by the explicit software ANSYS/LS-DYNA. To improve the solving speed and efficiency, an explicit-explicit order solution method is put forward based on analysis of the features of implicit and explicit algorithm. The solution method was first applied to calculate the pre-loading of wheel/rail rolling contact with explicit algorithm, and then the results became the initial conditions in solving the dynamic process of wheel/rail rolling contact with explicit algorithm as well. Simultaneously, the common implicit-explicit order solution method is used to solve the FE model. Results show that the explicit-explicit order solution method has faster operation speed and higher efficiency than the implicit-explicit order solution method while the solution accuracy is almost the same. Hence, the explicit-explicit order solution method is more suitable for the wheel/rail rolling contact model with large scale and high nonlinearity.

  4. Determination of rail wear and short-time wear measurements of rails applying radioisotopes

    International Nuclear Information System (INIS)

    Grohmann, H.D.

    1981-01-01

    An energetic model has been developed for calculating rail wear. Short-time wear tests on rails after surface activation and following activity measurements showed a good agreement with the calculated values

  5. Fast rail corrugation detection based on texture filtering

    Science.gov (United States)

    Xiao, Jie; Lu, Kaixia

    2018-02-01

    The condition detection of rails in high-speed railway is one of the important means to ensure the safety of railway transportation. In order to replace the traditional manual inspection, save manpower and material resources, and improve the detection speed and accuracy, it is of great significance to develop a machine vision system for locating and identifying defects on rails automatically. Rail defects exhibit different properties and are divided into various categories related to the type and position of flaws on the rail. Several kinds of interrelated factors cause rail defects such as type of rail, construction conditions, and speed and/or frequency of trains using the rail. Rail corrugation is a particular kind of defects that produce an undulatory deformation on the rail heads. In high speed train, the corrugation induces harmful vibrations on wheels and its components and reduces the lifetime of rails. This type of defects should be detected to avoid rail fractures. In this paper, a novel method for fast rail corrugation detection based on texture filtering was proposed.

  6. Active current management for four-rail railguns

    International Nuclear Information System (INIS)

    Beno, J.H.; Weldon, W.F.

    1991-01-01

    In this paper a system of auxiliary conductors designed to reduce current density peaks in railgun rails for four-rail, round-bore railguns is described. The effects on rail current density and projectile force are discussed. Railgun cross-sectional designs are presented for round-bore, four-rail railguns which operate at lower peak current densities and develop greater projectile forces than conventional two-rail, round-bore railguns

  7. Rail projects gather steam

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-01-15

    The global recession hit rail companies hard, as demand for bulk commodities such as coal was affected. But green shoots of recovery are now appearing, with many rail companies announcing new haulage contracts. 3 figs.

  8. National Rail Network 1:2,000,000 (node), Geographic WGS84, BTS (2006) [us_rail_network_100k_nd_BTS_2006

    Data.gov (United States)

    Louisiana Geographic Information Center — The Rail Network is a comprehensive database of the nation's railway system at the 1:100,000 scale. The data set covers all 50 States plus the District of Columbia.

  9. Rail Access to Yucca Mountain: Critical Issues

    International Nuclear Information System (INIS)

    Halstead, R. J.; Dilger, F.; Moore, R. C.

    2003-01-01

    The proposed Yucca Mountain repository site currently lacks rail access. The nearest mainline railroad is almost 100 miles away. Absence of rail access could result in many thousands of truck shipments of spent nuclear fuel and high-level radioactive waste. Direct rail access to the repository could significantly reduce the number of truck shipments and total shipments. The U.S. Department of Energy (DOE) identified five potential rail access corridors, ranging in length from 98 miles to 323 miles, in the Final Environmental Impact Statement (FEIS) for Yucca Mountain. The FEIS also considers an alternative to rail spur construction, heavy-haul truck (HHT) delivery of rail casks from one of three potential intermodal transfer stations. The authors examine the feasibility and cost of the five rail corridors, and DOE's alternative proposal for HHT transport. The authors also address the potential for rail shipments through the Las Vegas metropolitan area

  10. Rail base corrosion and cracking prevention

    Science.gov (United States)

    2014-07-01

    Rail base corrosion combined with fatigue or damage can significantly reduce rail life. Studies were done to examine the relative contribution of damage, corrosion, and fatigue on rail life. The combined effects can be separated into constituent fact...

  11. 49 CFR 210.9 - Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars. 210.9 Section 210.9 Transportation Other Regulations... locomotive, rail car, or consist of a locomotive and rail cars. A locomotive, rail car, or consist of a...

  12. Undergraduate Certificate in Rail Transportation/Engineering.

    Science.gov (United States)

    2016-05-05

    A shift in the U.S. transportation environment has led to a revival in rail transport, especially in : freight rail1. In the meantime, an aging rail employee demographic presents a severe threat to : sufficient level of individuals equipped to handle...

  13. Ruby on Rails for dummies

    CERN Document Server

    Burd

    2007-01-01

    Quickly create Web sites with this poweful tool Use this free and easy programming language for e-commerce sites and blogs If you need to build Web and database applications quickly but you don''t dream in computer code, take heart! Ruby on Rails was created for you, and this book will have you up and running in no time. The Ruby scripting language and the Rails framework let you create full-featured Web applications fast. It''s even fun! Discover how toInstall and run Ruby and RailsUse the RadRails IDECreate a blog with RubyConnect your Web site to a databaseBuild a shopping cartExplore Ruby'

  14. A Current-Mode Common-Mode Feedback Circuit (CMFB) with Rail-to-Rail Operation

    Science.gov (United States)

    Suadet, Apirak; Kasemsuwan, Varakorn

    2011-03-01

    This paper presents a current-mode common-mode feedback (CMFB) circuit with rail-to-rail operation. The CMFB is a stand-alone circuit, which can be connected to any low voltage transconductor without changing or upsetting the existing circuit. The proposed CMFB employs current mirrors, operating as common-mode detector and current amplifier to enhance the loop gain of the CMFB. The circuit employs positive feedback to enhance the output impedance and gain. The circuit has been designed using a 0.18 μm CMOS technology under 1V supply and analyzed using HSPICE with BSIM3V3 device models. A pseudo-differential amplifier using two common sources and the proposed CMFB shows rail to rail output swing (± 0.7 V) with low common-mode gain (-36 dB) and power dissipation of 390 μW.

  15. Rail electrodynamics in a plasma armature railgun

    International Nuclear Information System (INIS)

    Rolader, G.E.; Jamison, K.A.; Villecco, R.A.; Graham, F.R.

    1991-01-01

    A model is developed to investigate rail electrodynamics in a plasma armature railgun. This model describes the rail motion in response to the transitory Lorentz force and the compressive restoration force from the material which is between the rails and the containment structure. In this model the distance between the rails is found to oscillate with a frequency of β. The magnetic field and the dynamic behavior of the rails induce local electric fields. We investigate the significance of these electric fields in the laboratory frame and in the projectile frame. In the lab frame, rail electrodynamics induces local electric fields which have maximums spaced behind the projectile at locations where βt p is an odd multiple of π, where t p is the time since the projectile has passed an axial location on the rails. When the projectile is accelerating, rail dynamics induce electric fields in the projectile frame which have maximums where βt p is an even multiple of π. As the projectile velocity increases, the locations of the peak voltages move farther behind the projectile. For the CHECMATE railgun, calculations indicate that the rail displacement is on the order of 2 mm, the rail velocity is on the order of 50 m/s, and the voltages induced in the projectile frame are on the order of 20--40 V

  16. 7 CFR 1220.615 - State and United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false State and United States. 1220.615 Section 1220.615... CONSUMER INFORMATION Procedures To Request a Referendum Definitions § 1220.615 State and United States. State and United States include the 50 States of the United States of America, the District of Columbia...

  17. 7 CFR 1220.129 - State and United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false State and United States. 1220.129 Section 1220.129... CONSUMER INFORMATION Soybean Promotion and Research Order Definitions § 1220.129 State and United States. The terms State and United States include the 50 States of the United States of America, the District...

  18. Superconducting augmented rail gun (SARG)

    International Nuclear Information System (INIS)

    Homan, C.G.; Cummings, C.E.; Fowler, C.M.

    1986-01-01

    Superconducting augmentation consists of a superconducting coil operating in the persistent mode closely coupled magnetically with a normally conducting rail gun. A theoretical investigation of the effect of this system on a rail gun has shown that two benefits occur. Projectile velocities and launch efficiencies increase significantly depending on the magnetic coupling between the rail and augmentation circuits. Previous work evaluated an idealized system by neglecting energy dissipation effects. In this paper, the authors extend the analysis to include the neglected terms and show improved actual launch efficiencies for the SARG configuration. In this paper, the authors discuss details of projectile design in depth and present preliminary results of rail gun performance

  19. 46 CFR 190.25-10 - Storm rails.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Storm rails. 190.25-10 Section 190.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 190.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

  20. 46 CFR 72.40-10 - Storm rails.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Storm rails. 72.40-10 Section 72.40-10 Shipping COAST... and Guards § 72.40-10 Storm rails. (a) Suitable storm rails shall be installed in all passageways and at the deckhouse sides where passengers or crew might have normal access. Storm rails shall be...

  1. 46 CFR 92.25-10 - Storm rails.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Storm rails. 92.25-10 Section 92.25-10 Shipping COAST... ARRANGEMENT Rails and Guards § 92.25-10 Storm rails. (a) On vessels in ocean and coastwise service, suitable storm rails shall be installed in all passageways and at the deckhouse sides where persons on board...

  2. High-strength chromium--molybdenum rails

    International Nuclear Information System (INIS)

    Smith, Y.E.; Sawhill, J.M. Jr.; Cias, W.W.; Eldis, G.T.

    1976-01-01

    A laboratory study was conducted with the aim of developing an as-rolled rail of over 100 ksi (689 N/mm 2 ) yield strength. A series of compositions providing both pearlitic and bainitic microstructures was evaluated. A fine pearlitic structure was developed in a 0.73 percent C -- 0.83 percent Mn -- 0.16 percent Si -- 0.75 percent Cr -- 0.21 percent Mo steel by simulating the mill cooling rate of 132-lb/yd (65.5-kg/m) rail. Two 100-ton commercial heats were made of this approximate composition and processed into 132-lb/yd (65.5-kg/m) rail. Samples tested in the laboratory ranged from 109 to 125 ksi (750 to 860 N/mm 2 ) in yield strength. The chromium-molybdenum rails also exhibited excellent fracture toughness and fatigue properties. Sections of the rail were joined by both flash-butt welding and thermite welding. The hardness peaks produced in the flash-butt welds could be reduced by applying either a postweld current or an induction heating cycle. The high-strength chromium-molybdenum rails have been in service for over eight months in curved sections of an ore railway that carries over 55 million gross long tons per year. 7 tables, 18 figs

  3. Computation of wheel-rail contact force for non-mapping wheel-rail profile of Translohr tram

    Science.gov (United States)

    Ji, Yuanjin; Ren, Lihui; Zhou, Jinsong

    2017-09-01

    Translohr tram has steel wheels, in V-like arrangements, as guide wheels. These operate over the guide rails in inverted-V arrangements. However, the horizontal and vertical coordinates of the guide wheels and guide rails are not always mapped one-to-one. In this study, a simplified elastic method is proposed in order to calculate the contact points between the wheels and the rails. By transforming the coordinates, the non-mapping geometric relationship between wheel and rail is converted into a mapping relationship. Considering the Translohr tram's multi-point contact between the guide wheel and the guide rail, the elastic-contact hypothesis take into account the existence of contact patches between the bodies, and the location of the contact points is calculated using a simplified elastic method. In order to speed up the calculation, a multi-dimensional contact table is generated, enabling the use of simulation for Translohr tram running on curvatures with different radii.

  4. Analysis of rail welding methods for mine rail access with the use of modern technologies

    Science.gov (United States)

    Usoltsev, A. A.; Shevchenko, R. A.; Kozyrev, N. A.; Kriukov, R. E.; Shishkin, P. E.

    2017-09-01

    Welded joint zones are weak sections of the railway track for all traffic cases (in the case of high-speed traffic and heavy traffic). In the paper advantages and disadvantages of the basic ways of rails welding, which are widely used today, are considered: electrocontact and aluminothermic. Carefully selected mode of differentially thermally strengthened rails string will allow the process of correction after heat treatment to be minimized and internal residual compressive stresses to be kept. Particular attention should be paid to the method of rails welding, in which after rails welding during their cooling it is offered to perform quasi-isothermal exposure in the temperature range of fine structure formation by passing pulses of alternating electric current through the welded joint maintaining this temperature until the end of the transformation. The use of quasi-isothermal exposure at a temperature of 600 - 650 °C makes it possible to obtain a finely dispersed structure of the welded seam of rails without additional heat treatment.

  5. Rail inspection using noncontact laser ultrasonics

    International Nuclear Information System (INIS)

    Kim, Nak Hyeon; Sohn, Hoon; Han, Soon Woo

    2012-01-01

    In this study, a noncontact laser ultrasonic system is proposed for rail defect detection. An Nd Yag pulse laser is used for generation of ultrasonic waves, and the corresponding ultrasonic responses are measured by a laser Doppler vibrometer. For the detection of rail surface damages, the shape of the excitation laser beam is transformed into a line. On the other hand, a point source laser beam is used for the inspection of defects inside a rail head. Then, the interactions of propagating ultrasonic waves with defects are examined using actual rail specimens. Amplitude attenuation was mainly observed for a surface crack, and reflections were most noticeable from an internal damage. Finally, opportunities and challenges associated with real time rail inspection from a high speed train are discussed

  6. Model for predicting the frequency of broken rails

    Directory of Open Access Journals (Sweden)

    S. Vesković

    2012-04-01

    Full Text Available Broken rails can cause train delays, trains cancelations and, unfortunately, they are common causes of accidents. This affects planning of a resources, budget and organization of railway track maintenance. Planning of railway track maintenance cannot be done without an estimation of number of rails that will be replaced due to the broken rail incidents. There are many factors that influence broken rails and the most common are: rail age, annual gross tonnage, degree of curve and temperature in the time of breakage. The fuzzy logic model uses acquired data as input variables to predict the frequency of broken rails for the certain rail types on some Sections.

  7. 46 CFR 116.920 - Storm rails.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Storm rails. 116.920 Section 116.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... and Guards § 116.920 Storm rails. Suitable storm rails or hand grabs must be installed where necessary...

  8. 76 FR 13445 - Lycoming Valley Railroad Company-Operation Exemption-SEDA-COG Joint Rail Authority

    Science.gov (United States)

    2011-03-11

    ... Railroad Company-Operation Exemption--SEDA--COG Joint Rail Authority Lycoming Valley Railroad Company (LVRR... milepost 0.4 in Muncy, Lycoming County, Pa. The line is owned or leased by SEDA-COG Joint Rail Authority (SEDA-COG). LVRR states that the line it proposes to operate is an extension of its existing line of...

  9. 76 FR 13446 - Juniata Valley Railroad Company-Operation Exemption-SEDA-COG Joint Rail Authority

    Science.gov (United States)

    2011-03-11

    ... Railroad Company-Operation Exemption-SEDA-COG Joint Rail Authority Juniata Valley Railroad Company (JVRR... milepost 2.0 in Lewistown, Mifflin County, Pa. The line is owned or leased by SEDA-COG Joint Rail Authority (SEDA-COG). JVRR states that the line it proposes to operate is an extension of its existing line of...

  10. 76 FR 13445 - North Shore Railroad Company-Operation Exemption-SEDA-COG Joint Rail Authority

    Science.gov (United States)

    2011-03-11

    ... Railroad Company-Operation Exemption-SEDA-COG Joint Rail Authority North Shore Railroad Company (NSRR), a... milepost 2.0 in Berwick, Columbia County, Pa. The line is leased by SEDA-COG Joint Rail Authority (SEDA- COG). NSRR states that the line it proposes to operate is an extension of its existing line of...

  11. 46 CFR 177.900 - Deck rails.

    Science.gov (United States)

    2010-10-01

    ...) high. (4) While engaged in big game angling, the minimum rail height may be reduced to not less than... section as applicable must be installed when big game angling is not being conducted. (e) Where the... that a higher rail would interfere with the fishing operation and the lower rail would not...

  12. Assessment of Rail Seat Abrasion Patterns and Environment

    Science.gov (United States)

    2012-05-01

    Rail seat abrasion (RSA) of concrete ties is manifested by the loss of material under the rail seat area and, in extreme cases, results in loss of rail clip holding power, reverse rail cant, and gauge widening. RSA was measured in several curves on t...

  13. Applying the polluter-pays principle to rail: Environmental differentiation of rail access charges

    Energy Technology Data Exchange (ETDEWEB)

    Pons-Rigat, A.; Turro Calvet, M.; Ubalde Claver, Ll.

    2016-07-01

    Environmental charges to rail service operators are still at an early stage of implementation in Europe. Current schemes are dissimilar and most of them have a very limited scope or do not provide effective incentives to abate environmental impacts. This is due to several practical difficulties in implementing internalisation pricing schemes in the railway sector. The first difficulty arises from the lack of internalisation in other transport modes and the small competitive margin of railways. Increasing the overall level of rail charges could affect their survival. A second difficulty is due to the uncertainties in the valuation of external costs and in the establishment of the optimal level of charges. On top of that, the imperfect competition in the rail market and its operational and financial rigidities imply that pricing decisions could be unfair and produce undesired demand effects. These difficulties should not prevent, however, advancing towards the application to rail of adequate charging methods for its environmental costs. This paper addresses the problem of setting environmentally differentiated rail charges through an analytical approach. A generalised formulation is developed that sets the level of charges as a function of the degree of internalisation in other modes. Then, the optimal trade-off in the level of differentiation is assessed to extract general guidelines. Based on this, both the derived overall costs and benefits and the impacts on each agent are quantified. (Author)

  14. DETERMINATION OF CONTACT STRESSES IN THE RAILS P50, WHICH ARE OPERATED IN THE METRO

    Directory of Open Access Journals (Sweden)

    O. V. Agarkov

    2015-07-01

    Full Text Available Purpose. In the research one should do: 1 to determine a 3-d stress-strain state of the rail head in contact with the rolling wheels; 2 to analyze different forms of contact interaction; 3 to obtain the data necessary to calculate the durability of railway track rails. Methodology. The basis for calculating the 3-d stress-strain state is the finite element method. The basis for calculating the volume of the stress-strain state is the finite element method. The problem was solved in the elastic 3-D conditions. Real geometrical bodies parameters were used during the solving. Findings. The calculation of the 3-d stress-strain state of the rail head in contact with the rolling wheels for various cases of the contact surfaces geometry is performed. The results of calculation are presented in the graphic and tabular form. The comparison of different options contact conditions is performed. The results are analyzed and conclusions about the optimality conditions of contact interaction are made. Originality. The results of the calculation showed that within the criterion of minimizing the contact stresses in the rails P50 for the conditions specific to the direct contact route section, the use of rolling wheels with a profile according to the drawings of CJSC «MINETEK» is not the most rational decision. The most rational in this case, among the considered is the laying of rails in track with gradient 1:20 and the use of the wheel with the rolling surface profile of 1:10 conicity. The lack of rail gradient eliminates the benefits of the wheel running surface with 1:10 conicity, and a case of contact interaction is the least rational. Practical value. The results of analysis of the contact interaction of the rail head with a rolling stock wheel in a three-dimensional elastic formulation for different conditions of contact interaction were obtained. These data can be used to optimize the conditions of contact interaction and scientific substantiation of

  15. 7 CFR 1209.21 - State and United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false State and United States. 1209.21 Section 1209.21... Definitions § 1209.21 State and United States. (a) State means any of the several States, the District of Columbia, and the Commonwealth of Puerto Rico. (b) United States means collectively the several States of...

  16. A low power and low distortion rail-to-rail input/output amplifier using constant current technique

    International Nuclear Information System (INIS)

    Liu Yan; Zhao Yiqiang; Zhang Shilin; Zhao Hongliang

    2011-01-01

    A rail-to-rail amplifier with constant transconductance, intended for audio processing, is presented. The constant transconductance is obtained by a constant current technique based on the input differential pairs operating in the weak inversion region. MOSFETs working in the weak inversion region have the advantages of low power and low distortion. The proposed rail-to-rail amplifier, fabricated in a standard 0.35 μm CMOS process, occupies a core die area of 75 x 183 μm 2 . Measured results show that the maximum power consumption is 85.37 μW with a supply voltage of 3.3 V and the total harmonic distortion level is 1.2% at 2 kHz. (semiconductor integrated circuits)

  17. Minimizing Investment Risk of Integrated Rail and Transit-Oriented-Development Projects over Years in a Linear Monocentric City

    Directory of Open Access Journals (Sweden)

    Ding Liu

    2016-01-01

    Full Text Available Rail and transit-oriented-development (TOD projects are simultaneously optimized in this paper, with special consideration given to yearly variation and spatial and temporal correlation of population densities. In the proposed model, the objective is to minimize the investment risk of integrated rail and TOD projects with a given required expected return on investment. The investment risk is optimized based on closed-form solutions of the design variables, including rail line length, the number of TOD projects, and the number of housing units in each TOD project. The closed-form solutions are given explicitly under the assumption of social welfare maximization. It is found that underestimation exists for rail and TOD projects without consideration of the correlation of spatial and temporal population densities. TOD projects can greatly improve the return on investment of the rail operator. A numerical example is also presented.

  18. Rail gun powered by an integral explosive generator

    International Nuclear Information System (INIS)

    Peterson, D.R.; Fowler, C.M.

    1979-01-01

    We propose the use of a rail gun powered by an explosive magnetic flux compression generator built into the rail gun itself in which the rails of the gun are driven together behind the projectile by explosives. The magnetic field established between the rails by an initial current supplied by an external source at the breech of the gun is trapped and compressed by the collapsing rails to accelerate the projectile down the bore of the gun

  19. Research on the Common Rail Pressure Overshoot of Opposed-Piston Two-Stroke Diesel Engines

    Directory of Open Access Journals (Sweden)

    Yi Lu

    2017-04-01

    Full Text Available The common rail pressure has a direct influence on the working stability of Opposed-Piston Two-Stroke (OP2S diesel engines, especially on performance indexes such as power, economy and emissions. Meanwhile, the rail pressure overshoot phenomenon occurs frequently due to the operating characteristics of OP2S diesel engines, which could lead to serious consequences. In order to solve the rail pressure overshoot problem of OP2S diesel engines, a nonlinear concerted algorithm adding a speed state feedback was investigated. First, the nonlinear Linear Parameter Varying (LPV model was utilized to describe the coupling relationship between the engine speed and the rail pressure. The Linear Quadratic Regulator (LQR optimal control algorithm was applied to design the controller by the feedback of speed and rail pressure. Second, cooperating with the switching characteristics of injectors, the co-simulation of MATLAB/Simulink and GT-Power was utilized to verify the validity of the control algorithm and analyze workspaces for both normal and special sections. Finally, bench test results showed that the accuracy of the rail pressure control was in the range of ±1 MPa, in the condition of sudden 600 r/min speed increases. In addition, the fuel mass was reduced 76.3% compared with the maximum fuel supply quantity and the rail pressure fluctuation was less than 20 MPa. The algorithm could also be appropriate for other types of common rail system thanks to its universality.

  20. Momentum equation for arc-driven rail guns

    International Nuclear Information System (INIS)

    Batteh, J.H.

    1984-01-01

    In several models of arc-driven rail guns, the rails are assumed to be infinitely high to simplify the calculation of the electromagnetic fields which appear in the momentum equation for the arc. This assumption leads to overestimates of the arc pressures and accelerations by approximately a factor of 2 for typical rail-gun geometries. In this paper, we develop a simple method for modifying the momentum equation to account for the effect of finite-height rails on the performance of the rail gun and the properties of the arc. The modification is based on an integration of the Lorentz force across the arc cross section at each axial location in the arc. Application of this technique suggests that, for typical rail-gun geometries and moderately long arcs, the momentum equation appropriate for infinite-height rails can be retained provided that the magnetic pressure term in the equation is scaled by a factor which depends on the effective inductance of the gun. The analysis also indicates that the magnetic pressure gradient actually changes sign near the arc/projectile boundary because of the magnetic fields associated with the arc current

  1. 7 CFR 1160.104 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true United States. 1160.104 Section 1160.104 Agriculture... Definitions § 1160.104 United States. United States means the 48 contiguous states in the continental United States and the District of Columbia, except that United States means the 50 states of the United States...

  2. Used fuel rail shock and vibration testing options analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ross, Steven B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Best, Ralph E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Klymyshyn, Nicholas A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jensen, Philip J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Maheras, Steven J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-09-25

    The objective of the rail shock and vibration tests is to complete the framework needed to quantify loads of fuel assembly components that are necessary to guide materials research and establish a technical basis for review organizations such as the U.S. Nuclear Regulatory Commission (NRC). A significant body of experimental and numerical modeling data exists to quantify loads and failure limits applicable to normal conditions of transport (NCT) rail transport, but the data are based on assumptions that can only be verified through experimental testing. The test options presented in this report represent possible paths for acquiring the data that are needed to confirm the assumptions of previous work, validate modeling methods that will be needed for evaluating transported fuel on a case-by-case basis, and inform material test campaigns on the anticipated range of fuel loading. The ultimate goal of this testing is to close all of the existing knowledge gaps related to the loading of used fuel under NCT conditions and inform the experiments and analysis program on specific endpoints for their research. The options include tests that would use an actual railcar, surrogate assemblies, and real or simulated rail transportation casks. The railcar carrying the cradle, cask, and surrogate fuel assembly payload would be moved in a train operating over rail track modified or selected to impart shock and vibration forces that occur during normal rail transportation. Computer modeling would be used to help design surrogates that may be needed for a rail cask, a cask’s internal basket, and a transport cradle. The objective of the design of surrogate components would be to provide a test platform that effectively simulates responses to rail shock and vibration loads that would be exhibited by state-of-the-art rail cask, basket, and/or cradle structures. The computer models would also be used to help determine the placement of instrumentation (accelerometers and strain gauges

  3. Electron emission at the rail surface

    International Nuclear Information System (INIS)

    Thornhill, L.; Battech, J.

    1991-01-01

    In this paper the authors examine the processes by which current is transferred from the cathode rail to the plasma armature in an arc-driven railgun. Three electron emission mechanisms are considered, namely thermionic emission, field-enhanced thermionic emission (or Schottky emission), and photoemission. The author's calculations show that the dominant electron emission mechanism depends, to a great extent, on the work function of the rail surface, the rail surface temperature, the electric field at the rail surface, and the effective radiation temperature of the plasma. For conditions that are considered to be typical of a railgun armature, Schottky emission is the dominant electron emission mechanism, providing current densities on the order of 10 9 A/m 2

  4. 78 FR 36017 - MCM Rail Services LLC, d/b/a Baltimore Industrial Railroad-Operation Exemption-Hilco SP Rail, LLC

    Science.gov (United States)

    2013-06-14

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35725] MCM Rail Services LLC, d/b/a Baltimore Industrial Railroad-- Operation Exemption--Hilco SP Rail, LLC MCM Rail Services LLC, d/b/a Baltimore Industrial Railroad (MCM), a noncarrier, has filed a verified notice of exemption...

  5. Rail-guided robotic end-effector position error due to rail compliance and ship motion

    NARCIS (Netherlands)

    Borgerink, Dian; Stegenga, J.; Brouwer, Dannis Michel; Woertche, H.J.; Stramigioli, Stefano

    2014-01-01

    A rail-guided robotic system is currently being designed for the inspection of ballast water tanks in ships. This robotic system will manipulate sensors toward the interior walls of the tank. In this paper, the influence of rail compliance on the end-effector position error due to ship movement is

  6. Keeping rail on track: preliminary findings on safety culture in Australian rail.

    Science.gov (United States)

    Blewett, Verna; Rainbird, Sophia; Dorrian, Jill; Paterson, Jessica; Cattani, Marcus

    2012-01-01

    'Safety culture' is identified in the literature as a critical element of healthy and safe workplaces. How can rail organizations ensure that consistently effective work health and safety cultures are maintained across the diversity of their operations? This paper reports on research that is currently underway in the Australian rail industry aimed at producing a Model of Best Practice in Safety Culture for the industry. Located in rail organizations dedicated to the mining industry as well as urban rail and national freight operations, the research examines the constructs of organizational culture that impact on the development and maintenance of healthy and safe workplaces. The research uses a multi-method approach incorporating quantitative (survey) and qualitative (focus groups, interviews and document analysis) methods along with a participative process to identify interventions to improve the organization and develop plans for their implementation. The research uses as its analytical framework the 10 Platinum Rules, from the findings of earlier research in the New South Wales (Australia) mining industry, Digging Deeper. Data collection is underway at the time of writing and preliminary findings are presented at this stage. The research method may be adapted for use as a form of organizational review of safety and health in organizational culture.

  7. Research on Miniature Calibre Rail-Guns for the Mechanical Arm

    Directory of Open Access Journals (Sweden)

    Ronggang Cao

    2017-01-01

    Full Text Available Rail-gun should not only be used to military applications, but also can be developed as applications in the civilian aspects of the market. With the development of the electromagnetic launch technology, based on the similarity theory, using the existing rail-gun model to guide the construction of more economical miniature calibre rail-guns, and apply it in some machinery and equipment, this idea will open up a wider rail-gun application space. This article will focus on the feasibility of application of miniature calibre rail-guns in the mechanical arm. This paper designs the schematic diagram, then theoretical analyzes force conditions of the armature in the mechanical arm, calculates the possible range of the current amplitude and so on. The existing rail-gun model can be used to guides design the circuit diagram of the miniature calibre rail-gun. Based on the similarity theory and many simulation experiments, designed the experimental parameters of a miniature rail-gun and analyzed the current, Lorentz force, velocity, and location of the existing rail-gun and miniature rail-gun. The results show that the rail-gun launching technology applied to robot arms is feasibility. The application of miniature calibre rail-guns in the mechanical arm will benefit to the further development of rail-guns.

  8. Flex Cargo Rail. Developing new service, collection and distribution concepts for the transport of freight by rail.; Flex Cargo Rail. Wege zu neuen Bedien-, Sammel- und Verteilkonzepten im Schienengueterverkehr

    Energy Technology Data Exchange (ETDEWEB)

    Kochsiek, Joachim [Fraunhofer-Institut fuer Materialfluss und Logistik (IML), Dortmund (Germany). Gruppe Multimodale Logistik

    2010-07-01

    FlexCargoRail is a concept for self propelled electric freight wagons. This will enhance rail operations on first and last mile. The concept can be integrated in the existing rail system, so migration is possible without any lost investments. Standard components from industry and rail are used to realise the FCR wagon. Motors, transmissions, control and batteries are available and approved. One of the effects is to enhance service for loading terminals. This can become independent from factory siding operation. From the economic point of view, FCR is realisable. This is shown by target costing. Efficiency of FCR is dependent from high frequent use of FCR rail cars and the use of the possibility to shunt also conventional freight wagons with FCR wagons. Migration should be carried out in logistical networks with frequent operations between plants and sidings with a closed wagon pool. (orig.)

  9. A Rails / Django Comparison

    Directory of Open Access Journals (Sweden)

    2008-06-01

    Full Text Available Ruby on Rails (“Rails” is the dominant web programming framework for Ruby and, even outside the Ruby community, is considered the epitome of the latest generation of high-productivity, open source web development tools. Django is one of many competing web development frameworks for Python. It is notable, first, for being highly regarded amongst Python programmers, and second, for being one of the few of the new generation of framework that does not ape Ruby on Rails. Both Rails and Django claim greatly enhanced productivity, compared with more traditional web development frameworks. In this paper, we compare the two frameworks from the point of view of a developer attempting to choose one of the two frameworks for a new project.

  10. 75 FR 79394 - United States v. L.B. Foster Company and Portec Rail Products, Inc.; Proposed Final Judgment and...

    Science.gov (United States)

    2010-12-20

    ... Foster and Portec will create a virtual monopoly in the U.S. market for bonded joints. (2) Poly Joints 29.... For Plaintiff United States of America: Christine A. Varney, Assistant Attorney General. Molly S. Boast, Deputy Assistant Attorney General. Katherine B. Forrest, Deputy Assistant Attorney General...

  11. Excitation of Surface Electromagnetic Waves on Railroad Rail

    Science.gov (United States)

    1978-03-31

    UMTA's Office of Rail Technology research programs aim to improve urban rail transportation systems safety. This rail-transit research study attempts to develop an onboard, separate and independent obstacle-detection system--Surface Electromagnetic W...

  12. On Transport Service Selection in Intermodal Rail/Road Distribution Networks

    Directory of Open Access Journals (Sweden)

    Christian Bierwirth

    2012-11-01

    Full Text Available Intermodal rail/road freight transport constitutes an alternative to long-haul road transport for the distribution of large volumes of goods. The paper introduces the intermodal transportation problem for the tactical planning of mode and service selection. In rail mode, shippers either book train capacity on a per-unit basis or charter block trains completely. Road mode is used for short-distance haulage to intermodal terminals and for direct shipments to customers. We analyze the competition of road and intermodal transportation with regard to freight consolidation and service cost on a model basis. The approach is applied to a distribution system of an industrial company serving customers in eastern Europe. The case study investigates the impact of transport cost and consolidation on the optimal modal split.

  13. Future Parking Demand at Rail Stations in Klang Valley

    Directory of Open Access Journals (Sweden)

    Ho Phooi Wai

    2017-01-01

    Full Text Available Klang Valley, Malaysia is currently undergoing a massive development of rail transportation system expansion where the current integrated rail transit system will see new extensions of two MRT lines and an LRT line by year 2020. By year 2017, the first MRT line will be ready to run with 31 new rail stations connected to the current passenger rail network. The existing Park and Ride facilities in Klang Valley are commonly known as being unable to sufficiently cater for the current parking space demand. Therefore, with the expansion of many additional rail stations which are rapidly under construction, there are doubts that the future parking space at rail stations will be able to accommodate the sudden rise of rail passengers. Although the authorities are increasing parking bays at various locations, will the future parking demand at rail stations be sufficient? This paper studies the factors influencing parking demand in terms of population, car ownership, new car registrations and passenger rail ridership and estimating the future parking demand using Linear Regression method. Result shows that the forecasted parking demand at rail stations after the implementation of the first new MRT system in 2017 is 2.7 times more than in 2014.

  14. Supplement to the approved requirements for the packaging, labelling and carriage of radioactive material by rail. Packaging, Labelling and Carriage of Radioactive Material by Rail Regulations 1996

    International Nuclear Information System (INIS)

    1999-01-01

    The ADR and RID Framework Directives require EC member states' arrangements for the carriage of dangerous goods on domestic road and rail journeys to align with the existing ADR and RID agreements which cover international journeys by road and rail. Because ADR and RID are updated every two years in line with technical and scientific developments, the ADR/RID Framework Directives are also revised on a two-year cycle, to require member states to amend their implementing legislation accordingly. In Great Britain, these two Directives were initially implemented on 1 September 1996 via regulations (usually referred to as the 'carriage regulations'), containing the general legal duties, supported by approved documents, and an Approved Code of Practice containing the detailed technical requirements. The following approved documents have been updated: (a) Approved Vehicle Requirements (AVR) - L89; (b) Approved Requirements and test methods for the classification and packaging of dangerous goods for carriage (ARTM) - L88; (c) Approved Requirements for the packaging, labelling and carriage of radioactive material by rail (ARCRR) - L94; (d) Approved Requirements for the construction of vehicles intended for the carriage of explosives by road (AEVR) - L92; and (e) Approved Carriage List (ACL) - L90

  15. Characterization of deformed pearlitic rail steel

    Science.gov (United States)

    Nikas, Dimitrios; Meyer, Knut Andreas; Ahlström, Johan

    2017-07-01

    Pearlitic steels are commonly used for railway rails because they combine good strength and wear properties. During service, the passage of trains results in a large accumulation of shear strains in the surface layer of the rail, leading to crack initiation. Knowledge of the material properties in this region is therefore important for fatigue life prediction. As the strain is limited to a thin surface layer, very large strain gradients can be found. This makes it very difficult to quantify changes in material behavior. In this study hardness measurements were performed close to the surface using the Knoop hardness test method. The orientation of the pearlitic lamellas was measured to give an overview of the deformed microstructure in the surface of the rail. Microstructural characterization of the material was done by optical microscopy and scanning electron microscopy to evaluate the changes in the microstructure due to the large deformation. A strong gradient can be observed in the top 50 μm of the rail, while deeper into the rail the microstructure of the base material is preserved.

  16. Rail-to-rail low-power fully differential OTA utilizing adaptive biasing and partial feedback

    DEFF Research Database (Denmark)

    Tuan Vu, Cao; Wisland, Dag T.; Lande, Tor Sverre

    consumption. The DC-gain of the proposed OTA is improved by adding a partial feedback loop. A Common-Mode Feedback (CMFB) circuit is required for fully differential rail-to-rail operation. Simulations show that the OTA topology has a low stand-by power consumption of 96μW and a high FoM of 3.84 [(V...

  17. Vibroacoustical analysis of rail vehicle

    Directory of Open Access Journals (Sweden)

    Králíček J.

    2007-11-01

    Full Text Available The article deals with the vibroacoustical analysis of rail vehicle and is the extension of the previously presented work “Modelování podvozku kolejového vozidla s poddajným rámem”. The vibroacoustical analysis uses the outcomes of the dynamical analysis of rail vehicle bogie i.e. surface velocities of the bogie frame to compute the acoustic power radiated by the bogie frame and forces acting in the bogie-body interface. The radiated power and the force spectra are then used as the excitation to the rail body model in the environment Auto-SEA to compute the interior acoustic quantities.

  18. Complex eigenvalue analysis of railway wheel/rail squeal

    African Journals Online (AJOL)

    DR OKE

    Squeal noise from wheel/rail and brake disc/pad frictional contact is typical in railways. ... squeal noise by multibody simulation of a rail car running on rigid rails. ... system, traditional complex eigenvalue analysis by finite element was used.

  19. The Chicago to Iowa City intercity passenger rail route : business plan.

    Science.gov (United States)

    2011-03-21

    Business Plan Highlights : -No Iowa General Fund or RIIF appropriations : -State/local partnership : -Funds operation for the first 10 years : -Local cash commitment to passenger rail : -Conservative and practical financial forecasts : -Three compone...

  20. 76 FR 13446 - Nittany Bald and Eagle Railroad Company-Operation Exemption-SEDA-COG Joint Rail Authority

    Science.gov (United States)

    2011-03-11

    ... Eagle Railroad Company-Operation Exemption-SEDA- COG Joint Rail Authority Nittany Bald and Eagle... 0.0 and milepost 1.8 in Castanea, Clinton County, Pa. The line is owned or leased by SEDA-COG Joint Rail Authority (SEDA-COG). N&BE states that the line it proposes to operate is an extension of its...

  1. 31 CFR 800.225 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 800.225 Section 800... TAKEOVERS BY FOREIGN PERSONS Definitions § 800.225 United States. The term United States or U.S. means the United States of America, the States of the United States, the District of Columbia, and any commonwealth...

  2. Sectional Rail System as Base for a Plate Covering

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention concerns a sectional rail system which is constructed with the known outer rails with U-shaped cross-section and intermediate rails with C-shaped cross-section, and which is peculiar in that each of the retention means of the outer rail includes at least one stop pin which i...

  3. 7 CFR 1150.106 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true United States. 1150.106 Section 1150.106 Agriculture... Order Definitions § 1150.106 United States. United States means the 48 contiguous States in the continental United States. ...

  4. 75 FR 17462 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-04-06

    ... decision may be purchased by contacting the office of Public Assistance, Governmental Affairs, and...-2)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the second quarter 2010 Rail Cost...

  5. Malaria Treatment (United States)

    Science.gov (United States)

    ... Providers, Emergency Consultations, and General Public. Contact Us Malaria Treatment (United States) Recommend on Facebook Tweet Share Compartir Treatment of Malaria: Guidelines For Clinicians (United States) Download PDF version ...

  6. 49 CFR 37.79 - Purchase or lease of new rail vehicles by public entities operating rapid or light rail systems.

    Science.gov (United States)

    2010-10-01

    ... entities operating rapid or light rail systems. 37.79 Section 37.79 Transportation Office of the Secretary... operating rapid or light rail systems. Each public entity operating a rapid or light rail system making a... system shall ensure that the vehicle is readily accessible to and usable by individuals with disabilities...

  7. Can urban rail transit curb automobile energy consumption?

    International Nuclear Information System (INIS)

    Lin, Boqiang; Du, Zhili

    2017-01-01

    With the rapid development of China's economy and the speed of urbanization, China's automobile sector has experienced rapid development. The rapid development of the automobile sector has increased energy consumption. According to the results of this paper, automobile energy consumption accounted for about 10.73% of total energy consumption in China in 2015, about 3.6 times the proportion a decade ago. With the deterioration of urban traffic conditions, relying on expanding the amount of vehicles and city road network cannot solve the problem. Urban rail transit is energy-saving and less-polluting, uses less space, has large capacity, and secure. Urban rail transit, according to the principle of sustainable development, is a green transportation system and should be especially adopted for large and medium-sized cities. The paper uses the binary choice model (Probit and Logit) to analyze the main factors influencing the development of rail transit in Chinese cities, and whether automobile energy consumption is the reason for the construction of urban rail transit. Secondly, we analyze the influence of urban rail transit on automobile energy consumption using DID model. The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly, with continuous impact in the second year. - Highlights: • Investigate the main factors influencing the building of rail transit for Chinese cities. • Analyze the influence of urban rail transit on automobile energy consumption by DID model. • The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly.

  8. Two-Dimensional Impact Reconstruction Method for Rail Defect Inspection

    Directory of Open Access Journals (Sweden)

    Jie Zhao

    2014-01-01

    Full Text Available The safety of train operating is seriously menaced by the rail defects, so it is of great significance to inspect rail defects dynamically while the train is operating. This paper presents a two-dimensional impact reconstruction method to realize the on-line inspection of rail defects. The proposed method utilizes preprocessing technology to convert time domain vertical vibration signals acquired by wireless sensor network to space signals. The modern time-frequency analysis method is improved to reconstruct the obtained multisensor information. Then, the image fusion processing technology based on spectrum threshold processing and node color labeling is proposed to reduce the noise, and blank the periodic impact signal caused by rail joints and locomotive running gear. This method can convert the aperiodic impact signals caused by rail defects to partial periodic impact signals, and locate the rail defects. An application indicates that the two-dimensional impact reconstruction method could display the impact caused by rail defects obviously, and is an effective on-line rail defects inspection method.

  9. Environmental impact assessment of rail infrastructure.

    Science.gov (United States)

    2016-01-29

    This project resulted in three products: a comprehensive "Sustainable Rail Checklist," a rail planning GIS database, and a web GIS tool that integrates sustainability metrics and facilitates a rapid assessment before a formal NEPA process is implemen...

  10. Effects of profile wear on wheel–rail contact conditions and dynamic interaction of vehicle and turnout

    Directory of Open Access Journals (Sweden)

    Jingmang Xu

    2016-01-01

    Full Text Available Severe wear is a common damage mechanism in railway turnouts, which strongly affects the dynamic performance of railway vehicles and maintenance costs of tracks. This article explores the effects of profile wear on contact behaviors in the wheel–rail/switch contact and dynamic interaction, and nominal and measured worn turnout rail profiles are used as boundary conditions of wheel–rail contact. The calculation of the dynamic loads and the resultant contact stresses and internal stresses makes it possible to rationally design railway turnouts and correctly select the material to be applied for their components. For these reasons, the multi-body system SIMPACK and finite element software ANSYS are used to calculate the features of load and subsequently distributions of contact stresses and internal stresses in the regions of wheel–turnout components. The results show that profile wear disturbs the distribution of wheel–rail contact point pairs, changes the positions of wheel–rail contact points along the longitudinal direction, and affects the dynamic interaction of vehicle and turnout. For the measured profile in this article, profile wear aggravates vertical dynamic responses significantly but improves lateral dynamic responses. Profile wear disturbs the normal contact situations between the wheel and switch rail and worsens the stress state of the switch rail.

  11. 2013 International Conference on Electrical and Information Technologies for Rail Transportation

    CERN Document Server

    Liu, Zhigang; Qin, Yong; Zhao, Minghua; Diao, Lijun

    2014-01-01

    Proceedings of the 2013 International Conference on Electrical and Information Technologies for Rail Transportation (EITRT2013) collects the latest research in this field, including a wealth of state-of-the-art research theories and applications in intelligent computing, information processing, communication technology, automatic control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academics and industrial professionals to present the most innovative research on and developments in the field of rail transportation electrical and information technologies. Contributing authors from academia, industry and the government also offer inside views of new, interdisciplinary solutions.

  12. Three-dimensional rail-current distribution near the armature of simple, square-bore, two-rail railguns

    International Nuclear Information System (INIS)

    Beno, J.H.

    1991-01-01

    In this paper vector potential is solved as a three dimensional, boundary value problem for a conductor geometry consisting of square-bore railgun rails and a stationary armature. Conductors are infinitely conducting and perfect contact is assumed between rails and the armature. From the vector potential solution, surface current distribution is inferred

  13. 77 FR 69769 - Solid Waste Rail Transfer Facilities

    Science.gov (United States)

    2012-11-21

    ...] Solid Waste Rail Transfer Facilities AGENCY: Surface Transportation Board, DOT. ACTION: Final rules. SUMMARY: These final rules govern land-use-exemption permits for solid waste rail transfer facilities. The... Transportation Board over solid waste rail transfer facilities. The Act also added three new statutory provisions...

  14. 76 FR 80448 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2011-12-23

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. EP 290 (Sub-No. 5) (2012-1)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the first quarter 2012 rail cost adjustment factor (RCAF...

  15. 76 FR 59483 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2011-09-26

    ... the decision may be purchased by contacting the Office of Public Assistance, Governmental Affairs, and...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2011 Rail Cost Adjustment...

  16. 49 CFR 37.81 - Purchase or lease of used rail vehicles by public entities operating rapid or light rail systems.

    Science.gov (United States)

    2010-10-01

    ... entities operating rapid or light rail systems. 37.81 Section 37.81 Transportation Office of the Secretary... operating rapid or light rail systems. (a) Except as provided elsewhere in this section, each public entity operating a rapid or light rail system which, after August 25, 1990, purchases or leases a used rapid or...

  17. Capistrano and the Rails Application Lifecycle

    CERN Document Server

    Mornini, Tom

    2006-01-01

    Learn how to make your Rails deployments pain-free with Capistrano! This Short Cut shows you how to use Capistrano to automate the deployment of your Rails applications. It teaches you the basics, but also goes far beyond. It shows you realistic deployment scenarios, including some with complex server farms. It includes a quick reference to Capistrano. As your Rails applications grow, it becomes increasingly important to automate deployment and to keep your development environment well organized. Capistrano is the right tool for the job, and this PDF shows you how to use it effectively.

  18. Electromagnetic acceleration studies with augmented rails

    International Nuclear Information System (INIS)

    Maruo, T.; Fujioka, K.; Nagaoka, K.; Okamoto, A.; Ikuta, K.; Nemoto, K.

    1991-01-01

    A comparative study of electromagnetic acceleration in the rail-type accelerators with two kinds of rail geometry was carried out experimentally. The accelerators were energized by 200kJ capacitor bank and the weight of loaded projectiles was about 1.3 grams with 10mm x 10mm square bore. The attained velocity was 4.3km/s in the augmented accelerator, while it was 3.8km/s in the classical device. In this paper these differences in attained velocity are briefly discussed. A theoretical understanding of the rail erosion is also described

  19. 75 FR 35877 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-06-23

    ... available on our Web site, http://www.stb.dot.gov . Copies of the decision may be purchased by contacting...-3)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the third quarter 2010 rail cost...

  20. 76 FR 37191 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2011-06-24

    ... our Web site, http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the third quarter 2011 Rail Cost Adjustment...

  1. 75 FR 80895 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-12-23

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the first quarter 2011 Rail Cost Adjustment...

  2. 77 FR 37958 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2012-06-25

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the third quarter 2012 rail cost adjustment...

  3. 78 FR 37660 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2013-06-21

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board approves the third quarter 2013 Rail Cost Adjustment Factor...

  4. 78 FR 17764 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2013-03-22

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the second quarter 2013 Rail Cost Adjustment...

  5. 76 FR 16037 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2011-03-22

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the second quarter 2011 Rail Cost Adjustment...

  6. 75 FR 58019 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-09-23

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2010 Rail Cost Adjustment...

  7. 7 CFR 65.255 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false United States. 65.255 Section 65.255 Agriculture..., PEANUTS, AND GINSENG General Provisions Definitions § 65.255 United States. United States means the 50... United States. ...

  8. 7 CFR 1250.308 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1250.308 Section 1250.308 Agriculture... Research and Promotion Order Definitions § 1250.308 United States. United States means the 48 contiguous States of the United States of America and the District of Columbia. ...

  9. 7 CFR 1205.23 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1205.23 Section 1205.23 Agriculture... Procedures for Conduct of Sign-up Period Definitions § 1205.23 United States. The term United States means the 50 states of the United States of America. Procedures ...

  10. Hard-driven rail-gun tests

    International Nuclear Information System (INIS)

    Peterson, D.R.; Adams, D.F.; Cummings, C.E.; Fowler, C.M.; Kerrisk, J.F.; Marsh, S.P.; Parker, J.V.

    1983-01-01

    A number of prototype rail-gun designs have been tested, powered by explosive magnetic flux compression generators. Peak currents as high as 1.3 MA were delivered. Rail guns with 50-mm-thick Kevlar fiberwound structural shells were able to survive these high currents with minimum mechanical damage and were refired after enlarging the bores 0.2 to 0.4 mm to remove arc damage. In some tests, mechanical damage occurred that was apparently caused by the rebound of the gun after firing. Although the Kevlar shells had more than adequate strength, they appeared to lack sufficient stiffness, allowing excessive deflections. The use of a steel structural shell with a Kevlar sleeve was an improvement. Intrusion into the seams of the rail guns and condensation of material from the plasma armature were observed. Improved sealing of seams is indicated. In some cases, we suspect maldistribution of current within the gun; that is, not all the current delivered to the breech of the gun seemed to reach the plasma armature. Experiments are being designed to quantify the effects discussed. Rail guns of advanced design are being fabricated. An 18-g titanium projectile was accelerated to 2.4 km/s in a 16-mm-round-bore, 0.6-m-long gun, 4-6 g polycarbonate projectiles were accelerated to 3.5 km/s in 13-mm-square-bore, 1.2-m-long rail guns. All tests were conducted at atmospheric pressure

  11. Factors affecting commuter rail energy efficiency.

    Science.gov (United States)

    2016-02-17

    The objective of this study is to develop a planninglevel model of commuter rail energy efficiency. The : environmental benefits of commuter rail are often cited as one of the key benefits and motivators for its rapid development as a public trans...

  12. 78 FR 71724 - Rail Depreciation Studies

    Science.gov (United States)

    2013-11-29

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board Rail Depreciation Studies AGENCY: Surface Transportation Board, DOT. ACTION: Notice of OMB Approval of Information Collection. SUMMARY... collection, Rail Depreciation Studies. See 78 FR 18676 (Mar. 27, 2013). This collection, codified at 49 CFR...

  13. 77 FR 58910 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2012-09-24

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2012 rail cost adjustment factor (RCAF...

  14. 31 CFR 597.318 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 597.318 Section 597... General Definitions § 597.318 United States. The term United States means the United States, its territories, states, commonwealths, districts, and possessions, and all areas under the jurisdiction or...

  15. 7 CFR 1219.26 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1219.26 Section 1219.26 Agriculture..., AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.26 United States. United States means collectively the several 50 States of the United States, the District of...

  16. Analysis of minimum rail size in heavy axle load environment

    Science.gov (United States)

    2013-04-15

    The effects of increasing axle loads on rail integrity are examined in this paper. In the present context, rail integrity refers to the prevention and control of rail failures. Rail failures usually occur because cracks or defects develop and grow fr...

  17. 7 CFR 1212.31 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1212.31 Section 1212.31 Agriculture..., Consumer Education, and Industry Information Order Definitions § 1212.31 United States. “United States... territories and possessions of the United States. ...

  18. Detection method based on Kalman filter for high speed rail defect AE signal on wheel-rail rolling rig

    Science.gov (United States)

    Hao, Qiushi; Shen, Yi; Wang, Yan; Zhang, Xin

    2018-01-01

    Nondestructive test (NDT) of rails has been carried out intermittently in traditional approaches, which highly restricts the detection efficiency under rapid development of high speed railway nowadays. It is necessary to put forward a dynamic rail defect detection method for rail health monitoring. Acoustic emission (AE) as a practical real-time detection technology takes advantage of dynamic AE signal emitted from plastic deformation of material. Detection capacities of AE on rail defects have been verified due to its sensitivity and dynamic merits. Whereas the application under normal train service circumstance has been impeded by synchronous background noises, which are directly linked to the wheel speed. In this paper, surveys on a wheel-rail rolling rig are performed to investigate defect AE signals with varying speed. A dynamic denoising method based on Kalman filter is proposed and its detection effectiveness and flexibility are demonstrated by theory and computational results. Moreover, after comparative analysis of modelling precision at different speeds, it is predicted that the method is also applicable for high speed condition beyond experiments.

  19. 22 CFR 120.13 - United States.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false United States. 120.13 Section 120.13 Foreign... United States. United States, when used in the geographical sense, includes the several states, the Commonwealth of Puerto Rico, the insular possessions of the United States, the District of Columbia, the...

  20. The Homogeneity Research of Urban Rail Transit Network Performance

    Directory of Open Access Journals (Sweden)

    Wang Fu-jian

    2016-01-01

    Full Text Available Urban Rail Transit is an important part of the public transit, it is necessary to carry out the corresponding network function analysis. Previous studies mainly about network performance analysis of a single city rail transit, lacking of horizontal comparison between the multi-city, it is difficult to find inner unity of different Urban Rail Transit network functions. Taking into account the Urban Rail Transit network is a typical complex networks, so this paper proposes the application of complex network theory to research the homogeneity of Urban Rail Transit network performance. This paper selects rail networks of Beijing, Shanghai, Guangzhou as calculation case, gave them a complex network mapping through the L, P Space method and had a static topological analysis using complex network theory, Network characteristics in three cities were calculated and analyzed form node degree distribution and node connection preference. Finally, this paper studied the network efficiency changes of Urban Rail Transit system under different attack mode. The results showed that, although rail transport network size, model construction and construction planning of the three cities are different, but their network performance in many aspects showed high homogeneity.

  1. Life-cycle assessment of high-speed rail: the case of California

    International Nuclear Information System (INIS)

    Chester, Mikhail; Horvath, Arpad

    2010-01-01

    The state of California is expected to have significant population growth in the next half-century resulting in additional passenger transportation demand. Planning for a high-speed rail system connecting San Diego, Los Angeles, San Francisco, and Sacramento as well as many population centers between is now underway. The considerable investment in California high-speed rail has been debated for some time and now includes the energy and environmental tradeoffs. The per-trip energy consumption, greenhouse gas emissions, and other emissions are often compared against the alternatives (automobiles, heavy rail, and aircraft), but typically only considering vehicle operation. An environmental life-cycle assessment of the four modes was created to compare both direct effects of vehicle operation and indirect effects from vehicle, infrastructure, and fuel components. Energy consumption, greenhouse gas emissions, and SO 2 , CO, NO X , VOC, and PM 10 emissions were evaluated. The energy and emission intensities of each mode were normalized per passenger kilometer traveled by using high and low occupancies to illustrate the range in modal environmental performance at potential ridership levels. While high-speed rail has the potential to be the lowest energy consumer and greenhouse gas emitter, appropriate planning and continued investment would be needed to ensure sustained high occupancy. The time to environmental payback is discussed highlighting the ridership conditions where high-speed rail will or will not produce fewer environmental burdens than existing modes. Furthermore, environmental tradeoffs may occur. High-speed rail may lower energy consumption and greenhouse gas emissions per trip but can create more SO 2 emissions (given the current electricity mix) leading to environmental acidification and human health issues. The significance of life-cycle inventorying is discussed as well as the potential of increasing occupancy on mass transit modes.

  2. 75 FR 17203 - National Rail Plan

    Science.gov (United States)

    2010-04-05

    ... Rail Plan AGENCY: Federal Railroad Administration (FRA), Department of Transportation (DOT). ACTION... input into the development of the long-range National Rail Plan (NRP) through an open docket. In addition, the notice presents the overall plan design, Federal Railroad Administration's (FRA) goals in...

  3. 31 CFR 592.311 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 592.311 Section 592... § 592.311 United States. The term United States, when used in the geographic sense, means the several States, the District of Columbia, and any commonwealth, territory, or possession of the United States. ...

  4. Ceramic Rail-Race Ball Bearings

    Science.gov (United States)

    Balzer, Mark A.; Mungas, Greg S.; Peters, Gregory H.

    2010-01-01

    Non-lubricated ball bearings featuring rail races have been proposed for use in mechanisms that are required to function in the presence of mineral dust particles in very low-pressure, dry environments with extended life. Like a conventional ball bearing, the proposed bearing would include an inner and an outer ring separated by balls in rolling contact with the races. However, unlike a conventional ball bearing, the balls would not roll in semi-circular or gothic arch race grooves in the rings: instead, the races would be shaped to form two or more rails (see figure). During operation, the motion of the balls would push dust particles into the spaces between the rails where the particles could not generate rolling resistance for the balls

  5. Rails - Spears and Didion Ranches [ds310

    Data.gov (United States)

    California Natural Resource Agency — These data are the detections of Virginia rail (Rallus limicola), Sora (Porzana carolina), and California black rail (Laterallus jamaicensis) from 13 survey points...

  6. Outcome of rail fixator system in reconstructing bone gap

    Directory of Open Access Journals (Sweden)

    Amit Lakhani

    2014-01-01

    Conclusion: All patients well tolerated rail fixator with good functional results and gap reconstruction. Easy application of rail fixator and comfortable distraction procedure suggest rail fixator a good alternative for gap reconstruction of limbs.

  7. 7 CFR 1205.313 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1205.313 Section 1205.313 Agriculture... Research and Promotion Order Definitions § 1205.313 United States. United States means the 50 States of the United States of America. [31 FR 16758, Dec. 31, 1966. Redesignated at 56 FR 64472, Dec. 10, 1991] ...

  8. Chicago-St. Louis high speed rail plan

    International Nuclear Information System (INIS)

    Stead, M.E.

    1994-01-01

    The Illinois Department of Transportation (IDOT), in cooperation with Amtrak, undertook the Chicago-St. Louis High Speed Rail Financial and Implementation Plan study in order to develop a realistic and achievable blueprint for implementation of high speed rail in the Chicago-St. Louis corridor. This report presents a summary of the Price Waterhouse Project Team's analysis and the Financial and Implementation Plan for implementing high speed rail service in the Chicago-St. Louis corridor

  9. Chicago-St. Louis high speed rail plan

    Energy Technology Data Exchange (ETDEWEB)

    Stead, M.E.

    1994-12-31

    The Illinois Department of Transportation (IDOT), in cooperation with Amtrak, undertook the Chicago-St. Louis High Speed Rail Financial and Implementation Plan study in order to develop a realistic and achievable blueprint for implementation of high speed rail in the Chicago-St. Louis corridor. This report presents a summary of the Price Waterhouse Project Team`s analysis and the Financial and Implementation Plan for implementing high speed rail service in the Chicago-St. Louis corridor.

  10. Grinding induced martensite on the surface of rails

    DEFF Research Database (Denmark)

    Rasmussen, C.J.; Zhang, Xiaodan; Danielsen, Hilmar Kjartansson

    2014-01-01

    determined. Two different rail types R260 and R350HT that both had been ground by a grinding train were investigated. The rail sections, studied using optical and scanning electron microscopy, showed that the surface of both types of rails is covered with WELs. The hardness of the WEL is increased compared...

  11. Kinematic analysis on rail development into vacuum vessel for ITER blanket maintenance

    International Nuclear Information System (INIS)

    Kakudate, Satoshi; Shibanuma, Kiyoshi

    2006-01-01

    The vehicle manipulator system for blanket maintenance is used as a main driving mechanism for rail development, and three driving mechanisms d1, d2 (or d2') and d3 are used as cycle sequence of the repeated operations for rail development. This repeated operation can develop the articulated rail into the vacuum vessel. The rail development scenario, kinematic analysis model for rail development without any driving mechanisms in the rail joints, equations defined the angular between two rail links, identification of rail link at repeated operation, numerical analysis results on rail deployment under the forced position control of l i+1 , new rail development scenario using two driving mechanisms d1 and d2''under one cycle sequence of the repeated operations, and rail development test are reported. (S.Y.)

  12. A low-offset low-voltage CMOS Op Amp with rail-to-rail input and output ranges

    NARCIS (Netherlands)

    Holzmann, Peter J.; Wiegerink, Remco J.; Gierkink, Sander L.J.; Wassenaar, R.F.; Stroet, Peter; Stroet, P.M.

    1996-01-01

    A low voltage CMOS op amp is presented. The circuit uses complementary input pairs to achieve a rail-to-rail common mode input voltage range. Special attention has been given to the reduction of the op amp's systematic offset voltage. Gain boost amplifiers are connected in a special way to provide

  13. A Survey on the HFE-related Technologies for the Improvements of Human Performance of Safety Personnel in Rail System

    International Nuclear Information System (INIS)

    Koo, I. S.; Park, G. O.; Suh, S. M.; Sim, Y. R.; Go, J. H.; Jeong, J. H.; Son, C. H.

    2005-08-01

    Many studies have shown that the most cases of rail accidents have occurred because of performing his/her tasks in inappropriate way. It is generally recognised that the rail system without human element could never be happened quite long time. So human element in rail system is going to be the major factor to the next tragic accident. This state-of-the-art report describes three major HFE-related technologies, training simulator, the integrated test facility for human factors engineering, and human performance evaluation system, that are used in the other industries including nuclear power industry for the purpose of increasing rail safety through out the improvement of human task performance. Base on this report, the way of developing those technologies that should be applied to the korean rail system is presented

  14. A Survey on the HFE-related Technologies for the Improvements of Human Performance of Safety Personnel in Rail System

    Energy Technology Data Exchange (ETDEWEB)

    Koo, I. S.; Park, G. O.; Suh, S. M.; Sim, Y. R.; Go, J. H.; Jeong, J. H.; Son, C. H

    2005-08-15

    Many studies have shown that the most cases of rail accidents have occurred because of performing his/her tasks in inappropriate way. It is generally recognised that the rail system without human element could never be happened quite long time. So human element in rail system is going to be the major factor to the next tragic accident. This state-of-the-art report describes three major HFE-related technologies, training simulator, the integrated test facility for human factors engineering, and human performance evaluation system, that are used in the other industries including nuclear power industry for the purpose of increasing rail safety through out the improvement of human task performance. Base on this report, the way of developing those technologies that should be applied to the korean rail system is presented.

  15. 31 CFR 542.310 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 542.310 Section 542.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....310 United States. The term United States means the United States, its territories and possessions...

  16. 31 CFR 548.310 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 548.310 Section 548.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....310 United States. The term United States means the United States, its territories and possessions...

  17. 31 CFR 546.310 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 546.310 Section 546.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....310 United States. The term United States means the United States, its territories and possessions...

  18. 31 CFR 586.318 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 586.318 Section 586...) KOSOVO SANCTIONS REGULATIONS General Definitions § 586.318 United States. The term United States means the United States, its territories and possessions, and all areas under the jurisdiction or authority...

  19. 31 CFR 537.318 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 537.318 Section 537.318 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....318 United States. The term United States means the United States, its territories and possessions...

  20. 31 CFR 585.316 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 585.316 Section 585.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 585.316 United States. The term United States means the United States, its...

  1. 31 CFR 575.319 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 575.319 Section 575.319 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....319 United States. The term United States means the United States, its territories and possessions...

  2. 31 CFR 539.312 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 539.312 Section 539.312 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 539.312 United States. The term United States means the United States, its...

  3. 31 CFR 551.309 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 551.309 Section 551.309 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....309 United States. The term United States means the United States, its territories and possessions...

  4. 31 CFR 587.310 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 587.310 Section 587...) MILOSEVIC SANCTIONS REGULATIONS General Definitions § 587.310 United States. The term United States means the United States, its territories and possessions, and all areas under the jurisdiction or authority...

  5. 31 CFR 547.310 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 547.310 Section 547.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 547.310 United States. The term United States means the United States, its...

  6. A 0.8V, 7μA, rail-to-rail input/output, constant Gm operational amplifier in standard digital 0.18μm CMOS

    DEFF Research Database (Denmark)

    Citakovic, J; Nielsen, I. Riis; Nielsen, Jannik Hammel

    2005-01-01

    A two-stage amplifier, operational at 0.8V and drawing 7μA, has been integrated in a standard digital 0.18μm CMOS process. Rail-to-rail operations at the input are enabled by complementary transistor pairs with gm control. The efficient rail-to-rail output stage is biased in class AB. The measured...

  7. Acces to railway stations and its potential in increasing rail use

    NARCIS (Netherlands)

    Brons, M.R.E.; Givoni, M.; Rietveld, P.

    2008-01-01

    The propensity to travel by rail, and not, for example by car, can be considered to be a factor of the rail service offered, the access to it and the characteristics of the population served. Efforts to increase rail use usually focus on the rail service itself while the accessibility of the rail

  8. 31 CFR 598.317 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 598.317 Section 598.317 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 598.317 United States. The term United States means the United States, its territories and...

  9. 31 CFR 596.312 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 596.312 Section 596.312 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 596.312 United States. The term United States means the United States, including its...

  10. 31 CFR 538.314 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 538.314 Section 538.314 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 538.314 United States. The term United States means the United States, its territories and possessions...

  11. 31 CFR 543.310 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 543.310 Section 543.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 543.310 United States. The term United States means the United States, its territories and...

  12. 31 CFR 594.313 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 594.313 Section 594.313 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 594.313 United States. The term United States means the United States, its territories and...

  13. 31 CFR 588.310 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 588.310 Section 588.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 588.310 United States. The term United States means the United States, its territories and...

  14. 31 CFR 536.315 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 536.315 Section 536.315 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 536.315 United States. The term United States means the United States, its territories and...

  15. 31 CFR 544.310 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 544.310 Section 544.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... REGULATIONS General Definitions § 544.310 United States. The term United States means the United States, its...

  16. 31 CFR 545.313 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 545.313 Section 545.313 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 545.313 United States. The term United States means the United States, its territories and...

  17. 31 CFR 595.314 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 595.314 Section 595.314 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 595.314 United States. The term United States means the United States, its territories and possessions...

  18. 31 CFR 560.307 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 560.307 Section 560.307 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 560.307 United States. The term United States means the United States, including its territories and...

  19. 31 CFR 593.311 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 593.311 Section 593.311 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... REGULATIONS General Definitions § 593.311 United States. The term United States means the United States, its...

  20. 31 CFR 541.310 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 541.310 Section 541.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 541.310 United States. The term United States means the United States, its territories and possessions...

  1. 31 CFR 540.313 - United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 540.313 Section 540.313 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... REGULATIONS General Definitions § 540.313 United States. The term United States means the United States, its...

  2. Assessment of rail long-pitch corrugation

    Science.gov (United States)

    Valehrach, Jan; Guziur, Petr; Riha, Tomas; Plasek, Otto

    2017-09-01

    The paper focuses on defects of the running surface of the rail, namely the rail corrugation defect and specifically long-pitch corrugation in curves of small radii. These defects cause a shorter life of the rails, greater maintenance costs and increase the noise and vibration pollution. Therefore, it is very important to understand the formation and development of the imperfection of the rails. In the paper, various sections of railway tracks in the Czech Republic are listed, each of them completed with comparison of defect development, the particular track superstructure, rolling stock, axle load, traffic load etc. Based on performed measurements, defect development has been proved as different on sections with similar (or even same) parameters. The paper assumes that a train velocity is the significant circumstance for defect development rates. Assessment of track section with under sleeper pads, which are expected to be the one of the possible ways to suppress the corrugation defect development, is included in evaluation.

  3. Rail Vehicle Vibrations Control Using Parameters Adaptive PID Controller

    Directory of Open Access Journals (Sweden)

    Muzaffer Metin

    2014-01-01

    Full Text Available In this study, vertical rail vehicle vibrations are controlled by the use of conventional PID and parameters which are adaptive to PID controllers. A parameters adaptive PID controller is designed to improve the passenger comfort by intuitional usage of this method that renews the parameters online and sensitively under variable track inputs. Sinusoidal vertical rail misalignment and measured real rail irregularity are considered as two different disruptive effects of the system. Active vibration control is applied to the system through the secondary suspension. The active suspension application of rail vehicle is examined by using 5-DOF quarter-rail vehicle model by using Manchester benchmark dynamic parameters. The new parameters of adaptive controller are optimized by means of genetic algorithm toolbox of MATLAB. Simulations are performed at maximum urban transportation speed (90 km/h of the rail vehicle with ±5% load changes of rail vehicle body to test the robustness of controllers. As a result, superior performance of parameters of adaptive controller is determined in time and frequency domain.

  4. How to Park Freight Trains on Rail-Rail Transshipment Yards: The Train Location Problem

    OpenAIRE

    Michael Kellner; Nils Boysen; Malte Fliedner

    2010-01-01

    In modern rail-rail transshipment yards huge gantry cranes spanning all railway tracks allow for an efficent transshipment of containers between different freight trains. This way, multiple trains loaded with cargo for varying destinations can be consolidated to a reduced number of homogeneous trains, which is an essential requirement of hub-and-spoke railway systems. An important problem during the daily operations of such a transshipment yard is the train location problem, which assigns eac...

  5. The physics of wheel-rail stability

    Science.gov (United States)

    Tan, B. T. G.

    2018-05-01

    This article discusses, at a simple level, the dynamics of the wheel-rail interface, which is fundamental to the stability of rail vehicles. The physics underlying this topic deserves to be better known by physicists and physics students, as it underpins such an important part of our technological infrastructure.

  6. The Physics of Wheel-Rail Stability

    Science.gov (United States)

    Tan, B. T. G.

    2018-01-01

    This article discusses, at a simple level, the dynamics of the wheel-rail interface, which is fundamental to the stability of rail vehicles. The physics underlying this topic deserves to be better known by physicists and physics students, as it underpins such an important part of our technological infrastructure

  7. Návrh Rail-to-Rail operačního zesilovače v technologii CMOS

    OpenAIRE

    Cvešper, Stanislav

    2016-01-01

    Práce se zabývá návrhem rail-to-rail operačního zesilovače ve třídě AB v technologii CMOS I3T25. Práce začíná úvodem do CMOS tranzistorů, následuje rozbor struktur operačního zesilovače, jeho návrh a simulace v návrhovém prostředí Cadence, popsány jsou také různé metody pro minimalizaci napěťové symetrie. Hlavním cílem práce je dosažení rail-to-rail vstupního i výstupního rozsahu operačního zesilovače pracujícího ve třídě AB, s minimální napěťovou nesymetrií, včetně návrhu topologie navrženéh...

  8. 49 CFR 174.59 - Marking and placarding of rail cars.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Marking and placarding of rail cars. 174.59... RAIL General Handling and Loading Requirements § 174.59 Marking and placarding of rail cars. No person may transport a rail car carrying hazardous materials unless it is marked and placarded as required by...

  9. 7 CFR 1206.23 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1206.23 Section 1206.23 Agriculture... INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.23 United States. United... Rico, and the territories and possessions of the United States. ...

  10. Sled Tests Using the Hybrid III Rail Safety ATD and Workstation Tables for Passenger Trains

    Science.gov (United States)

    2017-08-01

    The Hybrid III Rail Safety (H3-RS) anthropomorphic test device (ATD) is a crash test dummy developed in the United Kingdom to evaluate abdomen and lower thorax injuries that occur when passengers impact workstation tables during train accidents. The ...

  11. The influence of friction coefficient and wheel/rail profiles on energy dissipation in the wheel/rail contact

    NARCIS (Netherlands)

    Idarraga Alarcon, G.A.; Burgelman, N.D.M.; Meza Meza, J.; Toro, A.; Li, Z.

    2015-01-01

    This work investigates the energy dissipation in a wheel/rail system through friction work modeling. In order to identify the effect of the friction coefficient on the energy dissipation in the wheel/rail contact, several simulations were performed using a 3D multibody model of a railway vehicle

  12. 7 CFR 1215.20 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1215.20 Section 1215.20 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... United States. United States means all of the States. Popcorn Board ...

  13. A Big Data Analysis Approach for Rail Failure Risk Assessment.

    Science.gov (United States)

    Jamshidi, Ali; Faghih-Roohi, Shahrzad; Hajizadeh, Siamak; Núñez, Alfredo; Babuska, Robert; Dollevoet, Rolf; Li, Zili; De Schutter, Bart

    2017-08-01

    Railway infrastructure monitoring is a vital task to ensure rail transportation safety. A rail failure could result in not only a considerable impact on train delays and maintenance costs, but also on safety of passengers. In this article, the aim is to assess the risk of a rail failure by analyzing a type of rail surface defect called squats that are detected automatically among the huge number of records from video cameras. We propose an image processing approach for automatic detection of squats, especially severe types that are prone to rail breaks. We measure the visual length of the squats and use them to model the failure risk. For the assessment of the rail failure risk, we estimate the probability of rail failure based on the growth of squats. Moreover, we perform severity and crack growth analyses to consider the impact of rail traffic loads on defects in three different growth scenarios. The failure risk estimations are provided for several samples of squats with different crack growth lengths on a busy rail track of the Dutch railway network. The results illustrate the practicality and efficiency of the proposed approach. © 2017 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

  14. HARDENING OF CRANE RAILS BY PLASMA DISCRETE-TIME SURFACE TREATMENT

    Directory of Open Access Journals (Sweden)

    S. S. Samotugin

    2017-01-01

    Full Text Available Crane wheels and rails are subjected to intensive wear in the process of operation. Therefore, improvement of these components’ performance can be considered a task of high importance. A promising direction in this regard is surface treatment by highly concentrated energy flows such as laser beams or plasma jets. This thesis suggests that the use of gradient plasma surface treatment can improve the performance of crane rails. A research was conducted, according to which hardened zones were deposited on crane rails under different treatment modes. Microhardness was measured both at the surface and in depth using custom-made microsections. The article includes the results of study of plasma surface hardening effects on wear resistance of crane rails. Change of plasma surface treatment parameters (current, plasma torch movement speed, argon gas flow rate allows for desired steel hardness and structure, while the choice of optimal location for hardened zones makes it possible to significantly improve wear resistance and crack resistance. As a result of plasma surface hardening, the fine-grained martensite structure is obtained with mainly lamellar morphology and higher hardness rate compared toinduction hardening or overlaying. Wear test of carbon steels revealed that plasma surfacing reduces abrasive wear rate compared to the irinitial state by 2 to 3 times. Enough sharp boundary between hardened and non-hardened portions has a positive effect on the performance of parts under dynamic loads, contributing to the inhibition of cracks during the transition from solid to a soft metal. For carbon and low alloy rail steels, the properties achieved by plasma surface hardening can effectively replace induction hardening or overlaying.The mode range for plasma surface treatment that allow sobtaining a surface layer with certain operating properties has been determined.

  15. 49 CFR 266.9 - Federal/State share.

    Science.gov (United States)

    2010-10-01

    ... salaries for State public employees working in the State Rail Service Assistance Program, shall be... of the objectives of the Rail Service Assistance Program; (iii) Be provided for in the approved grant... Rail Service Assistance Program is 80 percent, with the exception that the Federal share of payments to...

  16. Decision-Oriented Project Ranking for Asset Management System: Rail Net Denmark

    DEFF Research Database (Denmark)

    Salling, Kim Bang; Moshøj, Claus Rehfeld; Timm, Henrik

    2007-01-01

    is to apply a modified project ranking methodology: Asset Management System Priority Module (AMS-PM), which is a practical tool for assessing and ranking various project proposals in a straightforward manner. The methodology is set-out by a multi-criteria approach where weights are applied ultimately...... resulting in priority indices for the state-of-repair data. This paper is disposed as follows; firstly, a description of the Asset Management system is set-up including an overview of the state-of-repair data and the case study. Secondly, is the AMS-PM software model implemented through an exploratory case......The Danish rail net operator, Rail Net Denmark, has through the past years built up an Asset Management system, containing a certain percentile of all the company’s assets. This paper contains an elaborate overview on how to strengthen the system seen from a decision-support perspective. The focus...

  17. Guidance for consignors, rail operators and others involved in the packaging, labelling and carriage of radioactive material by rail. Pt. 5

    International Nuclear Information System (INIS)

    1996-01-01

    This document, part of a series of guides for those concerned with the road or rail transportation of dangerous goods, provides detailed recommendations for consignors, rail operators and others involved in the packaging, labelling and carriage of radioactive materials by rail. It covers the relevant legislation and regulations on the carriage of such dangerous goods to assist those involved with compliance. (UK)

  18. Plasma treatment of crane rails

    Directory of Open Access Journals (Sweden)

    Владислав Олександрович Мазур

    2016-07-01

    Full Text Available Crane operation results in wear and tear of rails and crane wheels. Renovation and efficiency of these details is therefore relevant. Modern technologies of wheels and rails restoration use surfacing or high-frequency currents treatment. Surface treatment with highly concentrated streams of energy- with a laser beam, plasma jet- is a promising direction.. It is proposed to increase the efficiency of crane rails by means of surface plasma treatment. The modes of treatment have been chosen.. Modelling of plasma jet thermal impact on a solid body of complex shape has been made. Plasma hardening regimes that meet the requirements of production have been defined. Structural transformation of the material in the crane rails on plasma treatment has been investigated. It has been concluded that for carbon and low alloy crane steels the plasma exposure zone is characterized by a high degree of hardened structure dispersion and higher hardness as compared to the hardness after high-frequency quenching. As this takes place phase transformations are both shift (in the upper zone of plasma influence and fluctuation (in the lower zone of the plasma. With high-speed plasma heating granular or lamellar pearlite mainly transforms into austenite. The level of service characteristics of hardened steel, which is achieved in this case is determined by the kinetics and completeness of pearlite → austenite transformation. For carbon and low alloy rail steels plasma hardening can replace bulk hardening, hardening by high-frequency currents, or surfacing. The modes for plasma treatment which make it possible to obtain a surface layer with a certain service characteristics have been defined

  19. Revisiting the reasons for contact fatigue defects in rails

    Directory of Open Access Journals (Sweden)

    Darenskiy Alexander

    2017-01-01

    Full Text Available As it is known rail is one of the most significant elements of the whole railway construction. Operation under alternating loads from wheels of the rolling stock and different ambient temperatures lead to appearance and development of rail defects and damages. A great variety of operational factors (freight traffic density, axial loads, traffic speeds, track layout and profile as well as special features of manufacturing and thermal treatment of rails create certain difficulties while identifying reasons for defects and damages. The article deals with an attempt to estimate influence of track layout and lateral forces on appearance of defects and damages in rails on the base of long-term observations of rail operation in Kharkiv Metro. On the basis of the vehicle/track mathematical model which considers structural features of both rolling stock and permanent way in underground systems, the level of lateral forces in curves was calculated. The coefficients of correlation between the track curvature, the level of forces and the amount of defected rails removed were later obtained, that made it possible to determine the dominant factor which may lead to appearance and development of contact fatigue defects in rails laid in curves.

  20. Investigation of the stresses in rails : Secondary effects associated with the bending of a centrically loaded rail

    NARCIS (Netherlands)

    Kolvoort, A.J.; Woestenburg, T.

    1982-01-01

    The flexural behaviour of a rail under purely vertical load acting in the plane of symmetry is investigated in this paper. For this purpose a rail ofNP 46 standard section was subjected to experimental research with the aid of electrical resistance strain gauges in the Laboratory for Highway and

  1. A CMOS rail-to-rail linear VI-converter

    NARCIS (Netherlands)

    Vervoort, P.P.; Vervoort, P.P.; Wassenaar, R.F.

    1995-01-01

    A linear CMOS VI-converter operating in strong inversion with a common-mode input range from the negative to the positive supply rail is presented. The circuit consists of three linear VI-converters based on the difference of squares principle. Two of these perform the actual V to I conversion,

  2. 7 CFR 1280.127 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1280.127 Section 1280.127 Agriculture... INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.127 United States. United States means collectively the 50 States and the District of Columbia. ...

  3. Improving fatigue performance of rail thermite welds

    Science.gov (United States)

    Jezzini-Aouad, M.; Flahaut, P.; Hariri, S.; Winiar, L.

    2010-06-01

    Rail transport development offers economic and ecological interests. Nevertheless, it requires heavy investments in rolling material and infrastructure. To be competitive, this transportation means must rely on safe and reliable infrastructure, which requires optimization of all implemented techniques and structure. Rail thermite (or aluminothermic) welding is widely used within the railway industry for in-track welding during re-rail and defect replacement. The process provides numerous advantages against other welding technology commonly used. Obviously, future demands on train traffic are heavier axle loads, higher train speeds and increased traffic density. Thus, a new enhanced weld should be developed to prevent accidents due to fracture of welds and to lower maintenance costs. In order to improve such assembly process, a detailed metallurgical study coupled to a thermomechanical modelling of the phenomena involved in the thermite welding process is carried out. Obtained data enables us to develop a new improved thermite weld (type A). This joint is made by modifying the routinely specified procedure (type B) used in a railway rail by a standard gap alumino-thermic weld. Joints of type A and B are tested and compared. Based on experimental temperature measurements, a finite element analysis is used to calculate the thermal residual stresses induced. In the vicinity of the weld, the residual stress patterns depend on the thermal conditions during welding as it also shown by litterature [1, 2]. In parallel, X-Ray diffraction has been used to map the residual stress field that is generated in welded rail of types A and B. Their effect on fatigue crack growth in rail welds is studied. An experimental study based on fatigue tests of rails welded by conventional and improved processes adjudicates on the new advances and results will be shown.

  4. Segmented rail linear induction motor

    Science.gov (United States)

    Cowan, Jr., Maynard; Marder, Barry M.

    1996-01-01

    A segmented rail linear induction motor has a segmented rail consisting of a plurality of nonferrous electrically conductive segments aligned along a guideway. The motor further includes a carriage including at least one pair of opposed coils fastened to the carriage for moving the carriage. A power source applies an electric current to the coils to induce currents in the conductive surfaces to repel the coils from adjacent edges of the conductive surfaces.

  5. Light Rails to Sustainable Mobility?

    DEFF Research Database (Denmark)

    Olesen, Mette

    that there is not one overall rationale for implementing light rail, many arguments are evident in various contexts. Furthermore, findings in this paper show that planners, policy makers and other stakeholders shape stories for or against the implementation of light rail through the use of narratives that are linked...... infrastructure projects and urban interventions through the political process and secure the outcome of these projects are recognisable in proportion to the visionary concept....

  6. The literature of the California black rail

    Science.gov (United States)

    Wilbur, Sanford R.

    1974-01-01

    Few birds have remained so little known as the California black rail (Laterallus jamaicensis coturniculus). Although first collected in 1859 or before and reported in 1874 (Ridgway 1874), its life history, distribution, and status have remained so obscure that even a sight record of the bird is deemed worthy of a report in some ornithological publications. Because degradation and loss of freshwater and saltwater marshlands in California may be detrimentally affecting the black rail, both the U.S. Bureau of Sport Fisheries and Wildlife (1973) and the California Department of Fish and Game (1972) have classified it as rare and worthy of further study. The 84 papers and notes both summarized in this report and included in its bibliography include essentially all that is currently known about the California black rail. Only 11 of these papers consider the life history of this rail in any detail. The rest are distribution notes and some of the more important papers on the closely related eastern black rail (L. j. jamaicensis). The latter are included for comparative purposes, or because they may lend clues to currently unknown facets of the life history of the western race.

  7. Three-dimensional rail cooling analysis for a repetitively fired railgun

    International Nuclear Information System (INIS)

    Liu, H.P.

    1991-01-01

    This paper reports on a three-dimensional (3-D) rail cooling analysis for fabrication and demonstration of a stand-alone repetitive fire compulsator driven 9 MJ gun system which has been performed to assure the entire rail can be maintained below its thermal limit for multiple shots. The 3-D rail thermal model can predict the temperature, pressure, and convective heat transfer coefficient variations of the coolant along the 10 m long copper rail. The 9-MJ projectiles will be fired every 20 s for 3 min. Water cooling was used in the model for its high cooling capacity. Single liquid phase heat transfer was assumed in the cooling analysis. For multiple shots, the temperature difference between the rail and the water was enhanced due to accumulated heat in the rail. As a result, the heat removal by water increased from shot-to-shot. The rail temperature initially increased and finally stabilized after a number of shots

  8. 7 CFR 1260.108 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1260.108 Section 1260.108 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Promotion and Research Order Definitions § 1260.108 United States. United States means the 50 States and the...

  9. 7 CFR 1221.32 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1221.32 Section 1221.32 Agriculture... INFORMATION ORDER Sorghum Promotion, Research, and Information Order Definitions § 1221.32 United States. United States or U.S. means collectively the 50 States, the District of Columbia, the Commonwealth of...

  10. 7 CFR 1216.30 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1216.30 Section 1216.30 Agriculture... INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.30 United States. United States means collectively the 50 states, the District of Columbia, the Commonwealth of Puerto Rico...

  11. 7 CFR 1218.22 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1218.22 Section 1218.22 Agriculture... INFORMATION ORDER Blueberry Promotion, Research, and Information Order Definitions § 1218.22 United States. United States means collectively the 50 states, the District of Columbia, the Commonwealth of Puerto Rico...

  12. 49 CFR 213.113 - Defective rails.

    Science.gov (United States)

    2010-10-01

    ... smooth, bright, or dark, round or oval surface substantially at a right angle to the length of the rail... in the head of the rail as a smooth, bright, or dark surface progressing until substantially at a... head, and extending into or through it. A crack or rust streak may show under the head close to the web...

  13. 7 CFR 1210.315 - United States.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1210.315 Section 1210.315 Agriculture... PLAN Watermelon Research and Promotion Plan Definitions § 1210.315 United States. United States means each of the several States and the District of Columbia. [60 FR 10797, Feb. 28, 1995] National...

  14. Attractive Mobile Corridors - The Power of Light Rail Infrastructures

    DEFF Research Database (Denmark)

    Olesen, Mette; Lassen, Claus

    2013-01-01

    Light rail is a popular tool in urban development strategies in many European cities. One argument for choosing a rail-based solution is that it signals stability to investors and will attract development and investments in the corridor. The choice of corridor in the various light rail cities...... and redistributes urban space. Furthermore light rail is not only a physical infrastructure but also an infrastructure of power that is carefully planned and designed creating both mental and physical patterns of mobilities and immobilities. Hence it is important to underline that mobility systems, such as light...

  15. Approved requirements for the packaging, labelling and carriage of radioactive material by rail

    International Nuclear Information System (INIS)

    1996-01-01

    This document specifies the detailed provisions in the United Kingdom with respect to rail transport for packages and packaging, test procedures for radioactive materials, information concerning the preparation of radioactive materials and the operation of tanks and container wagons. The Approved Requirements came into force on 1 September 1996 and are legally binding. (UK)

  16. Method for Predicting Thermal Buckling in Rails

    Science.gov (United States)

    2018-01-01

    A method is proposed herein for predicting the onset of thermal buckling in rails in such a way as to provide a means of avoiding this type of potentially devastating failure. The method consists of the development of a thermomechanical model of rail...

  17. 49 CFR 38.175 - High-speed rail cars, monorails and systems.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false High-speed rail cars, monorails and systems. 38....175 High-speed rail cars, monorails and systems. (a) All cars for high-speed rail systems, including... monorail systems operating primarily on dedicated rail (i.e., not used by freight trains) or guideway, in...

  18. Field homogeneity improvement of maglev NdFeB magnetic rails from joints.

    Science.gov (United States)

    Li, Y J; Dai, Q; Deng, C Y; Sun, R X; Zheng, J; Chen, Z; Sun, Y; Wang, H; Yuan, Z D; Fang, C; Deng, Z G

    2016-01-01

    An ideal magnetic rail should provide a homogeneous magnetic field along the longitudinal direction to guarantee the reliable friction-free operation of high temperature superconducting (HTS) maglev vehicles. But in reality, magnetic field inhomogeneity may occur due to lots of reasons; the joint gap is the most direct one. Joint gaps inevitably exist between adjacent segments and influence the longitudinal magnetic field homogeneity above the rail since any magnetic rails are consisting of many permanent magnet segments. To improve the running performance of maglev systems, two new rail joints are proposed based on the normal rail joint, which are named as mitered rail joint and overlapped rail joint. It is found that the overlapped rail joint has a better effect to provide a competitive homogeneous magnetic field. And the further structure optimization has been done to ensure maglev vehicle operation as stable as possible when passing through those joint gaps. The results show that the overlapped rail joint with optimal parameters can significantly reduce the magnetic field inhomogeneity comparing with the other two rail joints. In addition, an appropriate gap was suggested when balancing the thermal expansion of magnets and homogenous magnetic field, which is considered valuable references for the future design of the magnetic rails.

  19. Structural analysis of a rehabilitative training system based on a ceiling rail for safety of hemiplegia patients.

    Science.gov (United States)

    Kim, Kyong; Song, Won Kyung; Chong, Woo Suk; Yu, Chang Ho

    2018-04-17

    The body-weight support (BWS) function, which helps to decrease load stresses on a user, is an effective tool for gait and balance rehabilitation training for elderly people with weakened lower-extremity muscular strength, hemiplegic patients, etc. This study conducts structural analysis to secure user safety in order to develop a rail-type gait and balance rehabilitation training system (RRTS). The RRTS comprises a rail, trolley, and brain-machine interface. The rail (platform) is connected to the ceiling structure, bearing the loads of the RRTS and of the user and allowing locomobility. The trolley consists of a smart drive unit (SDU) that assists the user with forward and backward mobility and a body-weight support (BWS) unit that helps the user to control his/her body-weight load, depending on the severity of his/her hemiplegia. The brain-machine interface estimates and measures on a real-time basis the body-weight (load) of the user and the intended direction of his/her movement. Considering the weight of the system and the user, the mechanical safety performance of the system frame under an applied 250-kg static load is verified through structural analysis using ABAQUS (6.14-3) software. The maximum stresses applied on the rail and trolley under the given gravity load of 250 kg, respectively, are 18.52 MPa and 48.44 MPa. The respective safety factors are computed to be 7.83 and 5.26, confirming the RRTS's mechanical safety. An RRTS with verified structural safety could be utilized for gait movement and balance rehabilitation and training for patients with hemiplegia.

  20. Do Urban Rail Transit Facilities Affect Housing Prices? Evidence from China

    Directory of Open Access Journals (Sweden)

    Xu Zhang

    2016-04-01

    Full Text Available Urban rail transit facilities play a critical role in citizen’s social activities (e.g., residence, work and education. Using panel data on housing prices and urban rail transit facilities for 35 Chinese cities for 2002 to 2013, this study constructs a panel data model to evaluate the effect of rail transit facilities on housing prices quantitatively. A correlation test reveals significant correlations between housing prices and rail transit facilities. Empirical results demonstrate that rail transit facilities can markedly elevate real estate prices. Quantitatively, a 1% increase in rail transit mileage improves housing prices by 0.0233%. The results highlight the importance of other factors (e.g., per capita GDP, land price, investment in real estate and population density in determining housing prices. We also assess the effects of expectations of new rail transit lines on housing prices, and the results show that expectation effects are insignificant. These findings encourage Chinese policy makers to take rail transit facilities into account in achieving sustainable development of real estate markets.

  1. Buckling analysis of continuous welded rail track

    NARCIS (Netherlands)

    Van, M.A.

    1996-01-01

    Continuous welded rail track, compared to jointed track not only reduces maintenance costs, but also increases life time of track components and the comfort of passengers. Since expansion of the rails is hardly possible in CWR-track, a temperature increase will result in high compressive stresses

  2. A novel permanent magnetic rail for HTS levitation propulsion system

    International Nuclear Information System (INIS)

    Guo, F.; Tang, Y.; Ren, L.; Li, J.

    2009-01-01

    The Halbach Array has a characteristic advantage that the spatial fundamental field is canceled on one side of the array while the field intensity on the other side is enhanced. So this array could be used in the design of high temperature superconducting permanent magnetic levitation rail to improve the surface magnetic field and levitation force. This paper compared the surface magnetic field of the Halbach Array rail and two conventional levitation rails at first. Then proposed the potential advantages of Halbach Array applied in permanent magnetic rail system. But the Halbach Array rail is mechanical instability. An novel improved Halbach Array rail is proposed in this paper. The new structure combined the advantages of traditional structure and Halbach Array structure, solved the problem of mechanical instability, and carried on the advantage of Halbach Array on the magnetic field distribution at the same time.

  3. Field monitoring of rail squats using 3D ultrasonic mapping technique

    International Nuclear Information System (INIS)

    Kaewunruen, S.; Ishida, M.

    2014-01-01

    Rail squats and studs are typically classified as the propagation of any cracks .that have grown longitudinally through the subsurface. Some of the cracks could propagate to the bottom of rails transversely, which have branched from the initial longitudinal cracks with a depression of rail surface. The rail defects are commonly referred to as 'squats' when they were initiated from a damage layer caused by rolling contact fatigue, and as 'studs' when they were associated with a white etching layer caused by the transformation from pearlitic steel due to friction heat generated by wheel sliding or excessive traction. Such above-mentioned rail defects have been often observed in railway tracks catered for either light passenger or heavy freight traffics and for low, medium or high speed trains all over the world for over 60 years except some places such as sharp curves where large wear takes place under severe friction between the wheel flange and rail gauge face. It becomes a much-more significant issue when the crack grows and sometimes flakes off the rail (by itself or by insufficient rail grinding), resulting in a rail surface irregularity. Such rail surface defects induce wheel/rail impact and large amplitude vibration of track structure and poor ride quality. In Australia, Europe, and Japan, rail squats/studs have occasionally turned into broken rails. The root cause and preventive solution to this defect are still under investigation from the fracture mechanics and material sciences point of view. Some patterns of squat/stud development related to both curve and tangent track geometries have been observed and squat growth has been monitored for individual squats using ultrasonic mapping techniques. This paper highlights the field monitoring of squat/stud distribution and its growth. Squat/stud growth has been detected and scanned using the ultrasonic measurement device on a grid applied to the rail surface. The depths of crack paths at each grid node form a

  4. Field monitoring of rail squats using 3D ultrasonic mapping technique

    Energy Technology Data Exchange (ETDEWEB)

    Kaewunruen, S., E-mail: sakdirat.kaewunruen@transport.nsw.gov.au [NSW, Transport, Sydney (Australia); Ishida, M., E-mail: ishida-mk@n-koei.jp [Nippon Koei Co. Ltd., Railway Div., Railway Engineering Dept., Chiyoda-ku, Tokyo (Japan)

    2014-11-15

    Rail squats and studs are typically classified as the propagation of any cracks .that have grown longitudinally through the subsurface. Some of the cracks could propagate to the bottom of rails transversely, which have branched from the initial longitudinal cracks with a depression of rail surface. The rail defects are commonly referred to as 'squats' when they were initiated from a damage layer caused by rolling contact fatigue, and as 'studs' when they were associated with a white etching layer caused by the transformation from pearlitic steel due to friction heat generated by wheel sliding or excessive traction. Such above-mentioned rail defects have been often observed in railway tracks catered for either light passenger or heavy freight traffics and for low, medium or high speed trains all over the world for over 60 years except some places such as sharp curves where large wear takes place under severe friction between the wheel flange and rail gauge face. It becomes a much-more significant issue when the crack grows and sometimes flakes off the rail (by itself or by insufficient rail grinding), resulting in a rail surface irregularity. Such rail surface defects induce wheel/rail impact and large amplitude vibration of track structure and poor ride quality. In Australia, Europe, and Japan, rail squats/studs have occasionally turned into broken rails. The root cause and preventive solution to this defect are still under investigation from the fracture mechanics and material sciences point of view. Some patterns of squat/stud development related to both curve and tangent track geometries have been observed and squat growth has been monitored for individual squats using ultrasonic mapping techniques. This paper highlights the field monitoring of squat/stud distribution and its growth. Squat/stud growth has been detected and scanned using the ultrasonic measurement device on a grid applied to the rail surface. The depths of crack paths at each

  5. Mock-up tests of rail-mounted vehicle type in-vessel transporter/manipulator

    International Nuclear Information System (INIS)

    Oka, K.; Kakaudate, S.; Fukatsu, S.

    1995-01-01

    A rail-mounted vehicle system has been developed for remote maintenance of in-vessel components for fusion experimental reactor. In this system, a rail deploying/storing system is installed at outside of the reactor core and used to deploy a rail transporter and vehicle/manipulator for the in-vessel maintenance. A prototype of the rail deploying/storing system has been fabricated for mockup tests. This paper describes structural design of the prototypical rail deploying/storing system and results of the performance tests such as payload capacity, position control and rail deployment/storage performance

  6. Toll Facilities in the United States - Toll Facilities in the United States

    Data.gov (United States)

    Department of Transportation — Biennial report containing selected information on toll facilities in the United States that has been provided to FHWA by the States and/or various toll authorities...

  7. Couple of biomimetic surfaces with different morphologies for remanufacturing nonuniform wear rail surface

    Science.gov (United States)

    Sui, Qi; Zhou, Hong; Yang, Lin; Zhang, Haifeng; Feng, Li; Zhang, Peng

    2018-02-01

    In this work, biomimetic laser treatment was performed on repairing and remanufacturing the nonuniform worn rail surface. The wearing depth distribution of three work regions of a failure rail surface was discussed, and different thickness hardening layers with different microstructure, microhardness and wear resistances were detected from the worm surfaces. Varying wear resistances of the surfaces with different biomimetic morphologies were obtained by biomimetic laser treatments, and the corresponding effect on the lubrication sliding wear of treated and untreated surfaces were studied for comparative study. In addition, the relationship between wear resistance and the spacing of units was also provided, which can lay the important theoretical foundation for avoiding the wear resistance of the serious worn surface is less than that of the slight worn surface in the future practical applications.

  8. Traction sheave elevator, hoisting unit and machine space

    Science.gov (United States)

    Hakala, Harri; Mustalahti, Jorma; Aulanko, Esko

    2000-01-01

    Traction sheave elevator consisting of an elevator car moving along elevator guide rails, a counterweight moving along counterweight guide rails, a set of hoisting ropes (3) on which the elevator car and counterweight are suspended, and a drive machine unit (6) driving a traction sheave (7) acting on the hoisting ropes (3) and placed in the elevator shaft. The drive machine unit (6) is of a flat construction. A wall of the elevator shaft is provided with a machine space with its open side facing towards the shaft, the essential parts of the drive machine unit (6) being placed in the space. The hoisting unit (9) of the traction sheave elevator consists of a substantially discoidal drive machine unit (6) and an instrument panel (8) mounted on the frame (20) of the hoisting unit.

  9. A 0.8V, 7μA, rail-to-rail input/output, constant Gm operational amplifier in standard digital 0.18μm CMOS

    OpenAIRE

    Citakovic, J; Nielsen, I. Riis; Nielsen, Jannik Hammel; Asbeck, P; Andreani, Pietro

    2005-01-01

    A two-stage amplifier, operational at 0.8V and drawing 7μA, has been integrated in a standard digital 0.18μm CMOS process. Rail-to-rail operations at the input are enabled by complementary transistor pairs with gm control. The efficient rail-to-rail output stage is biased in class AB. The measured DC gain of the amplifier is 75dB, and the unity-gain frequency is 870kHz with a 12pF, 100kΩload. Both input and output stage transistors are biased in weak inversion.

  10. 78 FR 33393 - Petition Requesting a Ban or Standard on Adult Portable Bed Rails

    Science.gov (United States)

    2013-06-04

    ... assert that adult portable bed rails currently on the market are responsible for many injuries and deaths among users, particularly the elderly and frail. Petitioners state that many of these deaths result from...

  11. Simulations of roughness initiation and growth on railway rails

    Science.gov (United States)

    Sheng, X.; Thompson, D. J.; Jones, C. J. C.; Xie, G.; Iwnicki, S. D.; Allen, P.; Hsu, S. S.

    2006-06-01

    A model for the prediction of the initiation and growth of roughness on the rail is presented. The vertical interaction between a train and the track is calculated as a time history for single or multiple wheels moving on periodically supported rails, using a wavenumber-based approach. This vertical dynamic wheel/rail force arises from the varying stiffness due to discrete supports (i.e. parametric excitation) and the roughness excitation on the railhead. The tangential contact problem between the wheel and rail is modelled using an unsteady two-dimensional approach and also using the three-dimensional contact model, FASTSIM. This enables the slip and stick regions in the contact patch to be identified from the input geometry and creepage between the wheel and rail. The long-term wear growth is then predicted by applying repeated passages of the vehicle wheelsets, as part of an iterative solution.

  12. Prototype Rail Crossing Violation Warning Application Project Report.

    Science.gov (United States)

    2017-09-05

    This report is the Project Report for the Rail Crossing Violation Warning (RCVW) safety application developed for the project on Rail Crossing Violation Warning Application and Infrastructure Connection, providing a means for equipped connected vehic...

  13. 77 FR 17121 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2012-03-23

    ... decision may be purchased by contacting the Office of Public Assistance, Governmental Affairs, and...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, Department of Transportation. ACTION: Approval of rail cost adjustment factor. [[Page 17122

  14. Multiphysics modeling of a rail gun launcher

    Directory of Open Access Journals (Sweden)

    Y W Kwon

    2016-03-01

    Full Text Available A finite element based multiphysics modeling was conducted for a rail gunlauncher to predict the exit velocity of the launch object, and temperaturedistribution. For this modeling, electromagnetic field analysis, heat transferanalysis, thermal stress analysis, and dynamic analysis were conducted fora system consisting of two parallel rails and a moving armature. In particular,an emphasis was given to model the contact interface between rails andthe armature. A contact theory was used to estimate the electric as well asthermal conductivities at the interface. Using the developed model, aparametric study was conducted to understand effects of variousparameters on the exit velocity as well as the temperature distribution in therail gun launcher.

  15. Electric rail gun application to space propulsion

    International Nuclear Information System (INIS)

    Barber, J.P.

    1979-01-01

    The paper examines the possibility of using the DC electric gun principles as a space vehicle propulsion system, capable of producing intermediate thrust levels. The application of an electromagnetic launch technique, called the DC electric rail gun, to the space propulsion concept of O'Neill, is examined. It is determined that the DC electric rail gun offers very high projectile accelerations and a very significant potential for reducing the size and mass of a reaction motor for space application. A detailed description of rail gun principles is given and some simple expressions for the accelerating force, gun impedance, power supply requirements, and system performance are discussed

  16. 30 CFR 57.9102 - Movement of independently operating rail equipment.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Movement of independently operating rail... NONMETAL MINES Loading, Hauling, and Dumping Traffic Safety § 57.9102 Movement of independently operating rail equipment. Movement of two or more pieces of rail equipment operating independently on the same...

  17. Perspectives in high-speed transport: Maglev and/or wheel-and-rail techniques

    Energy Technology Data Exchange (ETDEWEB)

    Hochbruck, H

    1985-03-01

    Proceeding from a consideration of possible system structures, a technically and economically meaning-full top speed for a railway system is developed which offers, in competition with the airplane and the private car, good chances of winning an appropriate share of the traffic where the distances are in the range of about 400 to 600 km. It is deduced from the present state of developments in high-speed wheel/rail systems and in maglev technology that the wheel/rail mode has clear advantages where a network is concerned. Maglev technology is now being brought to the stage of operational readiness and its first applications are likely to be for point-to-point or direct-line links.

  18. A systems approach to reduce urban rail energy consumption

    International Nuclear Information System (INIS)

    González-Gil, A.; Palacin, R.; Batty, P.; Powell, J.P.

    2014-01-01

    Highlights: • An insightful overview of energy usage in urban rail systems is given. • The principal measures to reduce urban rail energy consumption are appraised. • A methodology is proposed to help implement energy saving schemes in urban rail. • Regenerative braking is shown to offer the greatest energy saving potential. - Abstract: There is increasing interest in the potential of urban rail to reduce the impact of metropolitan transportation due to its high capacity, reliability and absence of local emissions. However, in a context characterised by increasing capacity demands and rising energy costs, and where other transport modes are considerably improving their environmental performance, urban rail must minimise its energy use without affecting its service quality. Urban rail energy consumption is defined by a wide range of interdependent factors; therefore, a system wide perspective is required, rather than focusing on energy savings at subsystem level. This paper contributes to the current literature by proposing an holistic approach to reduce the overall energy consumption of urban rail. Firstly, a general description of this transport mode is given, which includes an assessment of its typical energy breakdown. Secondly, a comprehensive appraisal of the main practices, strategies and technologies currently available to minimise its energy use is provided. These comprise: regenerative braking, energy-efficient driving, traction losses reduction, comfort functions optimisation, energy metering, smart power management and renewable energy micro-generation. Finally, a clear, logical methodology is described to optimally define and implement energy saving schemes in urban rail systems. This includes general guidelines for a qualitative assessment and comparison of measures alongside a discussion on the principal interdependences between them. As a hypothetical example of application, the paper concludes that the energy consumption in existing urban

  19. Oil Vulnerabilities and United States Strategy

    Science.gov (United States)

    2007-02-08

    Mazda, Mercedes - Benz , Ford, Mercury, and Nissan offer flexible fuel vehicles in the United States. Ethanol is currently produced in the United States...USAWC STRATEGY RESEARCH PROJECT OIL VULNERABILITIES AND UNITED STATES STRATEGY by Colonel Shawn P. Walsh...Colleges and Schools, 3624 Market Street, Philadelphia, PA 19104, (215) 662-5606. The Commission on Higher Education is an institutional accrediting

  20. AN ANALYSIS OF SPATIAL EQUITY CONCERNING INVESTMENTS IN HIGH-SPEED RAIL SYSTEMS: THE CASE STUDY OF ITALY

    Directory of Open Access Journals (Sweden)

    Francesca PAGLIARA

    2016-09-01

    Full Text Available It is recognised in the literature that spatial accessibility is a measure of spatial equity and can be represented by the ease of travelling from an origin to a given destination via a given mode or set of transport modes. Although urban areas can benefit from improvements in accessibility when a new high-speed rail line is built, equity issues may arise. This manuscript describes a methodology for evaluating equity impacts due to an extension of the High Speed Rail network in Italy. A joint Revealed/Stated Preference survey has been carried out, collecting socioeconomic and travel data. Specifically, nine hypothetical scenarios have been submitted to Italian users aiming at understanding the motivations for not choosing the High Speed Rail as an alternative. The main outcome is that the access/egress travel costs connected with the High Speed Rail have a strong impact on spatial equity. The main policy implications of this study are that investors in high-speed rail should not only take into account the economic benefits brought by them, but also the spatial imbalance that these systems can bring.

  1. Singular point analysis during rail deployment into vacuum vessel for ITER blanket maintenance

    International Nuclear Information System (INIS)

    Kakudate, Satoshi; Shibanuma, Kiyoshi

    2007-05-01

    Remote maintenance of the ITER blanket composed of about 400 modules in the vessel is required by a maintenance robot due to high gamma radiation of ∼500Gy/h in the vessel. A concept of rail-mounted vehicle manipulator system has been developed to apply to the maintenance of the ITER blanket. The most critical issue of the vehicle manipulator system is the feasibility of the deployment of the articulated rail composed of eight rail links into the donut-shaped vessel without any driving mechanism in the rail. To solve this issue, a new driving mechanism and procedure for the rail deployment has been proposed, taking account of a repeated operation of the multi-rail links deployed in the same kinematical manner. The new driving mechanism, which is deferent from those of a usual 'articulated arm' equipped with actuator in the every joint for movement, is composed of three mechanisms. To assess the feasibility of the kinematics of the articulated rail for rail deployment, a kinematical model composed of three rail links related to a cycle of the repeated operation for rail deployment was considered. The determinant det J' of the Jacobian matrix J' was solved so as to estimate the existence of a singular point of the transformation during rail deployment. As a result, it is found that there is a singular point due to det J'=0. To avoid the singular point of the rail links, a new location of the second driving mechanism and the related rail deployment procedure are proposed. As a result of the rail deployment test based on the new proposal using a full-scale vehicle manipulator system, the respective rail links have been successfully deployed within 6 h less than the target of 8 h in the same manner of the repeated operation under a synchronized cooperation among the three driving mechanisms. It is therefore concluded that the feasibility of the rail deployment of the articulated rail composed of simple structures without any driving mechanism has been demonstrated

  2. 30 CFR 56.9102 - Movement of independently operating rail equipment.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Movement of independently operating rail... MINES Loading, Hauling, and Dumping Traffic Safety § 56.9102 Movement of independently operating rail equipment. Movement of two or more pieces of rail equipment operating independently on the same track shall...

  3. Track-Bridge Longitudinal Interaction of Continuous Welded Rails on Arch Bridge

    Directory of Open Access Journals (Sweden)

    Rong Chen

    2013-01-01

    Full Text Available Taking arch bridges, including deck, half-through, and through arch bridges (short for DAB, HTAB, and TAB as examples, mechanics analysis models of longitudinal interaction between continuously welded rails (short for CWRs and arch bridges are established. Based on the finite element method (FEM, the longitudinal interaction calculation software of CWR on arch bridges has been developed. Focusing on an HTAB, the tension, compression, and deflection conditions are calculated and analyzed. The results show that the mechanics analysis models of three types of arch bridges can truly reflect the real state of the structure; the calculation software can be used for systematic research of the CWR on arch bridge; as for HTAB, temperature difference of arch rib has a small effect on rail tension/compression, and arch bridge can be simplified as a continuous beam for rail tension/compression additional force calculation; in calculation of deflection conditions of HTAB, it is suggested that train loads are arranged on half span and full span and take the direction of load entering bridge into account. Additionally, the deflection additional force variation of CFST basket handle arch bridge is different from that of ordinary bridge.

  4. An automated system for rail transit infrastructure inspection.

    Science.gov (United States)

    2015-03-01

    This project applied commercial remote sensing and spatial information (CRS&SI) : technologies such as Ground Penetrating Radar (GPR), laser, GIS, and GPS to passenger rail : inspections. An integrated rail inspection system that can be mounted on hi...

  5. 31 CFR 596.313 - United States person.

    Science.gov (United States)

    2010-07-01

    ... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM LIST GOVERNMENTS SANCTIONS REGULATIONS General Definitions § 596.313 United States person. The term United States person means any United States...

  6. Optimal Placement Method of RFID Readers in Industrial Rail Transport for Uneven Rail Traflc Volume Management

    Science.gov (United States)

    Rakhmangulov, Aleksandr; Muravev, Dmitri; Mishkurov, Pavel

    2016-11-01

    The issue of operative data reception on location and movement of railcars is significant the constantly growing requirements of the provision of timely and safe transportation. The technical solution for efficiency improvement of data collection on rail rolling stock is the implementation of an identification system. Nowadays, there are several such systems, distinguished in working principle. In the authors' opinion, the most promising for rail transportation is the RFID technology, proposing the equipping of the railway tracks by the stationary points of data reading (RFID readers) from the onboard sensors on the railcars. However, regardless of a specific type and manufacturer of these systems, their implementation is affiliated with the significant financing costs for large, industrial, rail transport systems, owning the extensive network of special railway tracks with a large number of stations and loading areas. To reduce the investment costs for creation, the identification system of rolling stock on the special railway tracks of industrial enterprises has developed the method based on the idea of priority installation of the RFID readers on railway hauls, where rail traffic volumes are uneven in structure and power, parameters of which is difficult or impossible to predict on the basis of existing data in an information system. To select the optimal locations of RFID readers, the mathematical model of the staged installation of such readers has developed depending on the non-uniformity value of rail traffic volumes, passing through the specific railway hauls. As a result of that approach, installation of the numerous RFID readers at all station tracks and loading areas of industrial railway stations might be not necessary,which reduces the total cost of the rolling stock identification and the implementation of the method for optimal management of transportation process.

  7. Corrosion prevention of the rail by thermal spray coating of Zn-Al alloy; Zn-Al gokin yosha hifuku ni yoru reru no boshoku

    Energy Technology Data Exchange (ETDEWEB)

    Mizoguchi, S. [Nippon Steel Corp., Kitakyushu (Japan)] Urashima, C. [Kyushu Techno Research Corp., Fukuoka (Japan); Itai, K. [Nippon Steel Corp., Kitakyushu, Fukuoka (Japan). Technical Research Inst. of Yawata Works; Ichiriki, T.; Nishiki, M. [Kyushu Rail way comdany, Fukuoka (Japan)

    1997-03-30

    Replacement of the rail in under-sea tunnel such as the Kammon Tunnel is carried out very five years because of the severe corrosion caused by the humid state due to the leakage of sea water or the mist of sea water swept up by the passing trains. In this study, salt water spraying or sea water spraying test is carried out using Zn-Al alloy with the corrosion resistance and thermal spray efficiency even higher than those of Zn or Al. A rail coated by thermal spray of Zn-15mass%Al alloy has been laid by trial in the practical rail road of Kammon Tunnel for 5 years and 3 months, the deterioration degree of the coating, pitting depth, actual fatigue strength, etc. are evaluated. Further, these factors of a rail re-coated by Zincrich Primer+Tar Epoxy and a bare rail laid at the same time are evaluated for comparison. It is presumed by the results of the examination about the service life of a rail coated by the thermal spray of Zn-Al alloy based on the pitting depth in the rail base that the service life of such coated rail is more than twice as that of the bare rails used currently. 5 refs., 14 figs., 3 tabs.

  8. Nuclear development in the United States

    International Nuclear Information System (INIS)

    Brewer, S.

    1983-01-01

    The history of the nuclear development in the United States has been one of international cooperation relations so far. The United States is to offer the technical information on atomic energy utilization to foreign countries in exchange for the guarantee that they never attempt to have or develop nuclear weapons. Actually, the United States has supplied the technologies on nuclear fuel cycle and other related fields to enable other countries to achieve economical and social progress. The Department of Energy clarified the public promise of the United States regarding the idea of international energy community. The ratio of nuclear power generation to total electric power supply in the United States exceeded 12%, and will exceed 20% by 1990. Since 1978, new nuclear power station has not been ordered, and some of the contracted power stations were canceled. The atomic energy industry in the United States prospered at the beginning of 1970s, but lost the spirit now, mainly due to the institutional problems rather than the technical ones. As the policy of the government to eliminate the obstacles, the improvement of the procedure for the permission and approval, the establishment of waste disposal capability, the verification of fast breeder reactor technology and the promotion of commercial fuel reprocessing were proposed. The re-establishment of the United States as the reliable supplier of atomic energy service is the final aim. (Kako, I.)

  9. A big data analysis approach for rail failure risk assessment

    NARCIS (Netherlands)

    Jamshidi, A.; Faghih Roohi, S.; Hajizadeh, S.; Nunez Vicencio, Alfredo; Babuska, R.; Dollevoet, R.P.B.J.; Li, Z.; De Schutter, B.H.K.

    2017-01-01

    Railway infrastructure monitoring is a vital task to ensure rail transportation safety. A rail failure could result in not only a considerable impact on train delays and maintenance costs, but also on safety of passengers. In this article, the aim is to assess the risk of a rail failure by

  10. Structural parameter optimization design for Halbach permanent maglev rail

    International Nuclear Information System (INIS)

    Guo, F.; Tang, Y.; Ren, L.; Li, J.

    2010-01-01

    Maglev rail is an important part of the magnetic levitation launch system. Reducing the manufacturing cost of magnetic levitation rail is the key problem for the development of magnetic levitation launch system. The Halbach permanent array has an advantage that the fundamental spatial field is cancelled on one side of the array while the field on the other side is enhanced. So this array used in the design of high temperature superconducting permanent maglev rail could improve the surface magnetic field and the levitation force. In order to make the best use of Nd-Fe-B (NdFeB) material and reduce the cost of maglev rail, the effect of the rail's structural parameters on levitation force and the utilization rate of NdFeB material are analyzed. The optimal ranges of these structural parameters are obtained. The mutual impact of these parameters is also discussed. The optimization method of these structure parameters is proposed at the end of this paper.

  11. Structural parameter optimization design for Halbach permanent maglev rail

    Energy Technology Data Exchange (ETDEWEB)

    Guo, F., E-mail: guofang19830119@163.co [R and D Center of Applied Superconductivity, Huazhong University of Science and Technology, Wuhan 430074 (China); Tang, Y.; Ren, L.; Li, J. [R and D Center of Applied Superconductivity, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2010-11-01

    Maglev rail is an important part of the magnetic levitation launch system. Reducing the manufacturing cost of magnetic levitation rail is the key problem for the development of magnetic levitation launch system. The Halbach permanent array has an advantage that the fundamental spatial field is cancelled on one side of the array while the field on the other side is enhanced. So this array used in the design of high temperature superconducting permanent maglev rail could improve the surface magnetic field and the levitation force. In order to make the best use of Nd-Fe-B (NdFeB) material and reduce the cost of maglev rail, the effect of the rail's structural parameters on levitation force and the utilization rate of NdFeB material are analyzed. The optimal ranges of these structural parameters are obtained. The mutual impact of these parameters is also discussed. The optimization method of these structure parameters is proposed at the end of this paper.

  12. Control of rolling contact fatigue on premium rails in revenue service.

    Science.gov (United States)

    2014-11-01

    Effective rail maintenance strategies are : essential for controlling rolling contact fatigue : (RCF) and reducing wear of rails under heavy : axle load (HAL) operations. In an effort to : optimize rail maintenance strategies in revenue : service, Tr...

  13. Effect of Phase Shift in Dual-Rail Perfect State Transfer

    International Nuclear Information System (INIS)

    Wang Zhao-Ming; Zhang Zhong-Jun; Gu Yong-Jian

    2014-01-01

    We investigate the effect of phase shift on the perfect state transfer through two parallel one-dimensional ring-shaped spin chains. We find that the total success probability can be significantly enhanced by phase shift control when the communication channel consists of two odd chains. The average time to gain unit success probability is discussed, showing that a proper phase shift can be used to enhance the efficiency of state transmission. (general)

  14. NASTRAN buckling study of a linear induction motor reaction rail

    Science.gov (United States)

    Williams, J. G.

    1973-01-01

    NASTRAN was used to study problems associated with the installation of a linear induction motor reaction rail test track. Specific problems studied include determination of the critical axial compressive buckling stress and establishment of the lateral stiffness of the reaction rail under combined loads. NASTRAN results were compared with experimentally obtained values and satisfactory agreement was obtained. The reaction rail was found to buckle at an axial compressive stress of 11,400 pounds per square inch. The results of this investigation were used to select procedures for installation of the reaction rail.

  15. Rail Base Corrosion and Cracking Prevention: Phase 2

    Science.gov (United States)

    2018-04-09

    EWI was engaged by the Federal Railroad Administration to research rail treatments to prevent rail base corrosion in corrosive environments. A coating system was selected in Phase 1 and recommended for field trials. In Phase 2, four railroads sponsor...

  16. 78 FR 70274 - United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism...

    Science.gov (United States)

    2013-11-25

    ... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism Advisory Board AGENCY: International Trade... the schedule and agenda for an open meeting of the United States Travel and Tourism Advisory Board...

  17. 78 FR 3398 - United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism...

    Science.gov (United States)

    2013-01-16

    ... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism Advisory Board AGENCY: International Trade... the schedule and agenda for an open meeting of the United States Travel and Tourism Advisory Board...

  18. Plans for crash-tested wood bridge railings for concrete decks

    Science.gov (United States)

    Michael A. Ritter; Ronald K. Faller; Barry T. Rosson; Paula D. Hilbrich Lee; Sheila Rimal. Duwadi

    1998-01-01

    As part of a continuing cooperative research between the Midwest Roadside Safety Facility (MwRSF); the USDA Forest Service, Forest Products Laboratory (FPL); and the Federal Highway Administration (FHWA), several crashworthy wood bridge railings and approach railing transitions have been adapted for use on concrete bridge decks. These railings meet testing and...

  19. Linear and/or curvilinear rail mount system

    Science.gov (United States)

    Thomas, Jackie D. (Inventor); Harris, Lawanna L. (Inventor)

    2012-01-01

    One or more linear and/or curvilinear mounting rails are coupled to a structure. Each mounting rail defines a channel and at least one cartridge assembly is engaged in the channel. Each cartridge assembly includes a housing that slides within the channel. The housing defines a curvilinearly-shaped recess longitudinally aligned with the channel when the housing is in engagement therewith. The cartridge assembly also includes a cleat fitted in the recess for sliding engagement therealong. The cleat can be coupled to a fastener that passes through the mounting rail and the housing when the housing is so-engaged in the channel. The cleat is positioned in the recess by a position of the fastener.

  20. Home school student visit and introduction to rail transportation and engineering.

    Science.gov (United States)

    2016-06-22

    This project consisted of hosting local Champaign-Urbana, Illinois home school students for a visit to : the Rail Transportation and Engineering Center (RailTEC) at the University of Illinois at Urbana- : Champaign (UIUC). Beyond visiting RailTEC, st...

  1. Distribution and Habitat Associations of California Black Rail (Laterallus jamaicensis cortuniculus in the Sacramento–San Joaquin Delta

    Directory of Open Access Journals (Sweden)

    Danika C. Tsao

    2015-12-01

    Full Text Available doi: http://dx.doi.org/10.15447/sfews.2015v13iss4art4Past studies documenting the distribution and status of state “Threatened" California black rail (Laterallus jamaicensis coturniculus; hereafter black rail have largely omitted the Sacramento—San Joaquin Delta (hereafter Delta. During March to May of 2009–2011, we conducted call–playback surveys to assess the status of the species within a wide range of wetland habitats of the central Delta region. We detected black rails at 21 of 107 discrete wetland sites, primarily on in-channel islands with dense cover. To better understand the habitat and land cover characteristics, we developed a model of habitat suitability from these occurrence data and a fine-scale vegetation and land use dataset using MaxEnt. We also evaluated differences in the size of wetlands at sites where black rails were detected versus where they were not. Through surveys and quantitative modeling, we found black rail presence differed from other regions within California and Arizona, in that it was positively associated with tall (1 to 5 m emergent vegetation interspersed with riparian shrubs. Specific plants correlated with black rail presence included emergent wetland (Bolboschoenus acutus, B. californicus, B. acutus, Typha angustifolia, T. latifolia, Phragmites australis and riparian (Salix exigua, S. lasiolepis, Rosa californica, Rubus discolor, Cornus sericea species. Median patch size was significantly larger and perimeter-to-area ratios were significantly lower at wetland sites where black rails were found. These results provide a preliminary characterization of black rail habitat in the Delta region and highlight the need for better understanding of this listed species’ population size and habitat use in the region, in light of anticipated climate change effects and proposed large-scale restoration in the Delta.

  2. Rail Track Detection and Modelling in Mobile Laser Scanner Data

    Directory of Open Access Journals (Sweden)

    S. Oude Elberink

    2013-10-01

    Full Text Available We present a method for detecting and modelling rails in mobile laser scanner data. The detection is based on the properties of the rail tracks and contact wires such as relative height, linearity and relative position with respect to other objects. Points classified as rail track are used in a 3D modelling algorithm. The modelling is done by first fitting a parametric model of a rail piece to the points along each track, and estimating the position and orientation parameters of each piece model. For each position and orientation parameter a smooth low-order Fourier curve is interpolated. Using all interpolated parameters a mesh model of the rail is reconstructed. The method is explained using two areas from a dataset acquired by a LYNX mobile mapping system in a mountainous area. Residuals between railway laser points and 3D models are in the range of 2 cm. It is concluded that a curve fitting algorithm is essential to reliably and accurately model the rail tracks by using the knowledge that railways are following a continuous and smooth path.

  3. United States housing, 2012

    Science.gov (United States)

    Delton Alderman

    2013-01-01

    Provides current and historical information on housing market in the United States. Information includes trends for housing permits and starts, housing completions for single and multifamily units, and sales and construction. This report will be updated annually.

  4. Unistuste Rail Baltic - ilus ja kallis / Mikk Salu

    Index Scriptorium Estoniae

    Salu, Mikk, 1975-

    2011-01-01

    Rail Balticu puhul on tähtsaim küsimus, kas uut raudteeühendust on üldse vaja, mitte aga see, kas tee läheb läbi Tartu või Pärnu. Konsutatsioonifirma AECOM koostatud raportist Rail Balticu tasuvuse kohta

  5. Rail freight transportation concerns of developing economies: A Namibian perspective

    Directory of Open Access Journals (Sweden)

    Fanny Saruchera

    2017-05-01

    Full Text Available Background: Although rail transport appears to be well established and outperforming other transport modes in Europe and beyond, in the majority of developing economies it was observed that firms and travellers were, on the contrary, shunning from the rail. Despite considerable infrastructural investments in the African rail systems, the sector has been deteriorating over the years. Objectives: This study identifies the freight rail transportation problems faced by African developing economies, focusing on Namibia, and examines the potential actions and factors for minimising such problems, drawing lessons from some of the developed world’s success stories. Method: The objectives of this study are achieved through a survey of Windhoek-based industrial and logistics firms operating in Namibia. Self-administered survey questionnaires were distributed through the aid of trained research assistants. Results: The study’s results show that some of the reasons of shunning rail transport are a matter of attitude, whereas some are related to operational challenges. The study confirms that the transport mode used and ownership of the freight transport services used can affect the degree of satisfaction for the transportation of goods in Namibia. Conclusion: Namibian industrial and logistics firms avoid using rail, owing to its low level of satisfaction obtained from its use. Besides engaging in Public Private Partnerships (PPPs in rail transport operations, the study contends that rail transport should receive attention similar to that given to other transport modes for African economies such as Namibia to overcome the costs associated with the increasing road congestion.

  6. Bootstrap for rails

    CERN Document Server

    Rahman, Syed Fazle

    2015-01-01

    If you are a web developer who has a basic understanding of Ruby on Rails, this is the book for you. You should definitely have previous knowledge about HTML and how it works. However, CSS and JavaScript knowledge is optional for this book.

  7. Groningen Seaports : An Examination of Public Rail Infrastructure

    NARCIS (Netherlands)

    Droogendijk, Gert

    2010-01-01

    This report examines the value of the public rail infrastructure of Groningen Seaports, the port authority of Delfzijl and Eemshaven. There is substantial strategic value of public rail infrastructure due to the public good character, the mission of Groningen Seaports, the image of full port

  8. 49 CFR 213.343 - Continuous welded rail (CWR).

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Train Operations at Track Classes 6 and...) Designation of a desired rail installation temperature range for the geographic area in which the CWR is... installation temperature range when adjusting CWR. (b) Rail anchoring or fastening requirements that will...

  9. 77 FR 76169 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2012-12-26

    ....stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public Assistance...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the AAR's proposed rebasing calculations and...

  10. 75 FR 53734 - Patriot Rail, LLC, Patriot Rail Holdings LLC, and Patriot Rail Corp.-Continuance in Control...

    Science.gov (United States)

    2010-09-01

    ... noncarrier limited liability company that owns not less than 51% of the equity interests in PRH. PRH owns 100% of the stock of Patriot. Patriot is a noncarrier holding company that owns 100% of the stock of six...). Patriot currently controls the following six Class III rail carriers: Tennessee Southern Railroad Company...

  11. LOAD BEARING CAPACITY OF THE GLASS RAILING ELEMENT

    Directory of Open Access Journals (Sweden)

    Elizabeta Šamec

    2016-02-01

    Full Text Available In this paper some basic physical and mechanical properties of glass as structural material are presented. This research is about specifically manufactured glass railing element that will be a part of a pedestrian bridge construction in Zagreb, Croatia. Load bearing capacity test of the glass railing element is conducted within the Faculty of Civil Engineering in Zagreb and obtained experimental results are discussed and compared to the ones provided by the numerical model. Taking into account the behaviour of laminated glass and results of experimental and numerical testing, glass railing element can be regarded as safe.

  12. 31 CFR 500.520 - Payments from accounts of United States citizens in employ of United States in foreign countries...

    Science.gov (United States)

    2010-07-01

    ... States citizens in employ of United States in foreign countries and certain other persons. 500.520..., Authorizations and Statements of Licensing Policy § 500.520 Payments from accounts of United States citizens in employ of United States in foreign countries and certain other persons. (a) Banking institutions within...

  13. 31 CFR 515.520 - Payments from accounts of United States citizens in employ of United States in foreign countries...

    Science.gov (United States)

    2010-07-01

    ... States citizens in employ of United States in foreign countries and certain other persons. 515.520..., Authorizations, and Statements of Licensing Policy § 515.520 Payments from accounts of United States citizens in employ of United States in foreign countries and certain other persons. (a) Banking institutions within...

  14. TRAINING OF THE STATE PRESIDENT'S UNIT

    African Journals Online (AJOL)

    The primary function of the State President's Unit is to protect the head of state - not his person as is generally believed, but his authority over the state. Ironically, the ceremonial performances of the State President's Unit lead people to believe that they are only capable of doing drill exer- cises. However, upon investigating.

  15. Tartu ihkab Rail Baltica kiirraudteed endale / Madis Aesma

    Index Scriptorium Estoniae

    Aesma, Madis

    2005-01-01

    2005. aasta sügisel alustatakse uuringuid, et välja selgitada, millisest Eesti linnast - Tartust, Pärnust või Viljandist - peaks tulevikus läbi minema kiirraudtee Rail Baltica, mis viib kuue tunniga Tallinnast Varssavisse. Kaart: Kiirraudtee Rail Baltica kolm võimalikku suunda. Kommenteerib Andrus Ansip

  16. Review on Selection and Suitability of Rail Transit Station Design Pertaining to Public Safety

    Science.gov (United States)

    Akabal, Farah Mohd; Masirin, Mohd Idrus Haji Mohd; Abidin Akasah, Zainal; Rohani, Munzilah Md

    2017-08-01

    Railway has emerged as a fast, convenient, safe, clean, and low-cost alternative to air and road transportation. Many countries have invested in rail transportation. In America, Europe and Asia, large investments are planned for rail transportation. This is because congestion problems can be reduced with the introduction of rail transportation. Rail transportation involves several components which are important to ensure the smooth and safe delivery of services such as locomotives, rail stations and railway tracks. Rail transit stations are places where trains stop to pick-up and drop-off passengers. Stations are vital for many to enable them to engage in work and social commitments. This paper focuses only on the rail transit station as it is one of the important components in rail transportation. It is also considered as a key public meeting place and space for interactions in a community. The role of rail transit station and the requirements of a good rail transit station are also described in this paper. Steps in selecting the location of rail transit station include the function and facilities in rail transit station are discussed with reference to best practices and handbooks. Selection of the appropriate rail transit station locations may help users indirectly. In addition, this paper will also elucidate on the design considerations for an efficient and effective rail transit station. Design selections for the rail transit station must be balanced between aesthetic value and functional efficiency. The right design selection may help conserve energy, assure and facilitate consumers even thought a rail transit station plays a smaller role in attracting consumers compared to a shopping complex or a residential building. This will contribute towards better and greener building for a green transportation facility. Thus, with this paper it is expected to assist the relevant authority to identify important elements in the selection and determination of suitable

  17. Mechatronic modeling of real-time wheel-rail contact

    CERN Document Server

    Bosso, Nicola; Gugliotta, Antonio; Somà, Aurelio

    2013-01-01

    Real-time simulations of the behaviour of a rail vehicle require realistic solutions of the wheel-rail contact problem which can work in a real-time mode. Examples of such solutions for the online mode have been well known and are implemented within standard and commercial tools for the simulation codes for rail vehicle dynamics. This book is the result of the research activities carried out by the Railway Technology Lab of the Department of Mechanical and Aerospace Engineering at Politecnico di Torino. This book presents work on the project for the development of a real-time wheel-rail contact model and provides the simulation results obtained with dSpace real-time hardware. Besides this, the implementation of the contact model for the development of a real-time model for the complex mechatronic system of a scaled test rig is presented in this book and may be useful for the further validation of the real-time contact model with experiments on a full scale test rig.

  18. Top-of-Rail lubricant

    Energy Technology Data Exchange (ETDEWEB)

    Alzoubi, M. F.; Fenske, G. R.; Erck, R. A.; Boparai, A. S.

    2000-07-14

    Analysis of the volatile and semivolatile fractions collected after use of the TOR lubricant indicated that other than contaminants in the collection laboratory, no compounds on the EPA's Target Compound Lists (Tables 2 and 5) were detected in these fractions. The data of these qualitative analyses, given in the various tables in the text, indicate only the relative amounts of the tentatively identified compounds. The authors recommend that quantitative analysis be performed on the volatile and semivolatile fractions to allow confirmation of the tentatively identified compounds and to obtain absolute amounts of the detected compounds. Additionally, the semivolatile fraction should be analyzed by liquid chromatography/mass spectrometry to identify compounds that are not chromatographable under the temperature program used for determination of semivolatile compounds. Introducing the top-of-rail (TOR) lubricant into the wheel/rail interface results in a reduction of almost 60% of lateral friction force over the forces encountered under dry conditions. This reveals good potential for energy savings, as well as wear reduction, for railroad companies. In TOR lubrication, an increase in the angle of attack and axle load results in increased lateral friction and rate of lubricant consumption. The most efficient TOR lubricant quantity to be used in the wheel/rail interface must be calculated precisely according to the number of cars, axle loads, train speed, and angle of attack.

  19. LeRC rail accelerators: test designs and diagnostic techniques

    International Nuclear Information System (INIS)

    Zana, L.M.; Kerslake, W.R.; Sturman, J.C.; Wang, S.Y.; Terdan, F.F.

    1984-01-01

    The feasibility of using rail accelerators for various in-space and to-space propulsion applications was investigated. A 1 meter, 24 sq mm bore accelerator was designed with the goal of demonstrating projectile velocities of 15 km/sec using a peak current of 200 kA. A second rail accelerator, 1 meter long with a 156.25 sq mm bore, was designed with clear polycarbonate sidewalls to permit visual observation of the plasma arc. A study of available diagnostic techniques and their application to the rail accelerator is presented. Specific topics of discussion include the use of interferometry and spectroscopy to examine the plasma armature as well as the use of optical sensors to measure rail displacement during acceleration. Standard diagnostics such as current and voltage measurements are also discussed. 15 references

  20. 36 CFR 1192.175 - High-speed rail cars, monorails and systems.

    Science.gov (United States)

    2010-07-01

    ..., monorails and systems. 1192.175 Section 1192.175 Parks, Forests, and Public Property ARCHITECTURAL AND... TRANSPORTATION VEHICLES Other Vehicles and Systems § 1192.175 High-speed rail cars, monorails and systems. (a... steel-wheel-on-steel-rail technology, and monorail systems operating primarily on dedicated rail (i.e...

  1. Material Evaluation of an Elastomer, Epoxy and Lightweight Concrete Rail Attachment System for Direct Fixation Light Rail Applications

    Science.gov (United States)

    Swarner, Benjamin R.

    Sound Transit plans to extend its current light rail system, which runs along the I-5 corridor in Seattle, Washington, across the I-90 Homer Hadley floating bridge as part of a project to connect the major city centers in the region. But, no light rail has ever crossed a floating bridge due to several unique engineering challenges. One of these challenges is attaching the rails to the existing bridge deck without drilling into the bridge pontoons. This research program was developed to test and analyze a direct fixation method that uses lightweight concrete plinths and an elastomer-epoxy system to attach the rails to the bridge deck. The elastomer used was a two-part, pourable elastomer with cork particles intermixed to alter the mechanical properties of the material. A lightweight concrete mixture was analyzed for use in the plinths, and system tests investigated the system response under tensile, compressive and shear loading. The shear response of the system was examined further under varying loading conditions including different surface preparations, elastomer thicknesses, strain-rates and after freeze-thaw conditioning. Experimental data was examined for trends based on these parameters to best characterize the system, and the elastomer was evaluated in the context of modern elastomer research.

  2. Management and Evaluation System on Human Error, Licence Requirements, and Job-aptitude in Rail and the Other Industries

    Energy Technology Data Exchange (ETDEWEB)

    Koo, In Soo; Suh, S. M.; Park, G. O. (and others)

    2006-07-15

    Rail system is a system that is very closely related to the public life. When an accident happens, the public using this system should be injured or even be killed. The accident that recently took place in Taegu subway system, because of the inappropriate human-side task performance, showed demonstratively how its results could turn out to be tragic one. Many studies have shown that the most cases of the accidents have occurred because of performing his/her tasks in inappropriate way. It is generally recognised that the rail system without human element could never be happened quite long time. So human element in rail system is going to be the major factor to the next tragic accident. This state of the art report studied the cases of the managements and evaluation systems related to human errors, license requirements, and job aptitudes in the areas of rail and the other industries for the purpose of improvement of the task performance of personnel which consists of an element and finally enhancement of rail safety. The human errors, license requirements, and evaluation system of the job aptitude on people engaged in agencies with close relation to rail do much for development and preservation their abilities. But due to various inside and outside factors, to some extent it may have limitations to timely reflect overall trends of society, technology, and a sense of value. Removal and control of the factors of human errors will have epochal roles in safety of the rail system through the case studies of this report. Analytical results on case studies of this report will be used in the project 'Development of Management Criteria on Human Error and Evaluation Criteria on Job-aptitude of Rail Safe-operation Personnel' which has been carried out as a part of 'Integrated R and D Program for Railway Safety'.

  3. Management and Evaluation System on Human Error, Licence Requirements, and Job-aptitude in Rail and the Other Industries

    International Nuclear Information System (INIS)

    Koo, In Soo; Suh, S. M.; Park, G. O.

    2006-07-01

    Rail system is a system that is very closely related to the public life. When an accident happens, the public using this system should be injured or even be killed. The accident that recently took place in Taegu subway system, because of the inappropriate human-side task performance, showed demonstratively how its results could turn out to be tragic one. Many studies have shown that the most cases of the accidents have occurred because of performing his/her tasks in inappropriate way. It is generally recognised that the rail system without human element could never be happened quite long time. So human element in rail system is going to be the major factor to the next tragic accident. This state of the art report studied the cases of the managements and evaluation systems related to human errors, license requirements, and job aptitudes in the areas of rail and the other industries for the purpose of improvement of the task performance of personnel which consists of an element and finally enhancement of rail safety. The human errors, license requirements, and evaluation system of the job aptitude on people engaged in agencies with close relation to rail do much for development and preservation their abilities. But due to various inside and outside factors, to some extent it may have limitations to timely reflect overall trends of society, technology, and a sense of value. Removal and control of the factors of human errors will have epochal roles in safety of the rail system through the case studies of this report. Analytical results on case studies of this report will be used in the project 'Development of Management Criteria on Human Error and Evaluation Criteria on Job-aptitude of Rail Safe-operation Personnel' which has been carried out as a part of 'Integrated R and D Program for Railway Safety'

  4. Common rail technology for future low emission diesel vehicles; Common Rail Technologie fuer zukuenftige Diesel Fahrzeuge mit niedrigen Emissionswerten

    Energy Technology Data Exchange (ETDEWEB)

    Schoeppe, D.; Bercher, P.; Guerrassi, N.; Spadafora, P.

    2004-07-01

    The diesel fuel injection equipment will remain a key element for diesel engine technology evolution. Achieving emission targets at competitive prices has been and will continue to be a major technical challenge to the engine manufacturer. Delphi is continuously developing its common rail system and its components to fulfill future stricter emission legislation while simultaneously improving performance on noise, fuel consumption and power output. This paper will describe the latest developments that delphi introduced into the market in their common rail system to comply with future legislative emission targets. Further, a novel common rail injector will be presented, that uses a revolutionary, direct acting operating principle, where the nozzle is directly operated by a piezo actuator, without the use of a servo-hydraulic flow circuit. The superior performance of this injector concept will be shown, especially in minimum quantity capability as well as multiple injection performance. The direct acting operating principle allows rapid opening and closing of the injector, without compromising pilot quantity capability. The emission benefit obtained by such opening and closing behavior will be shown. Finally, based on the findings discussed, the paper will conclude on key features of future common rail systems. (orig.)

  5. Hybrid rail gun electromagnetic accelerators

    International Nuclear Information System (INIS)

    Chen, K.W.; Hachen, H.; Lee, A.; Legh, G.; Lin, T.; Mattay, S.; Wipf, S.

    1983-01-01

    Theoretical and experimental investigations on hybrid rail accelerators are presented. It is shown that the side surface areas and in some cases sabots of the projectile can be used to provide substantial amount of additional thrust. Moreover, it is shown that in most cases examined, external magnetic fields can be conveniently incorporated in the accelerator designs to supplement the rail-induced fields. Total thrusts in excess of 10 MN for kilogram-sized projectiles can in principle be established with driving currents of the order of 1 MA. No obvious stress limitations are foreseen. The percentages of thrust from external magnetic fields are sufficiently high that the use of which should be encouraged. The increased flexibility in the projectile shapes available permits the use of the proposed hybrid electromagnetic launcher technology in a variety of new areas, such as thrust boosts in conventional chemical rockets and other similar applications. Furthermore, the additional thrust obtained from the use of side surface areas greatly increases the maximum permissable thrust otherwise limited by material strength considerations. Thrust analyses for projectiles in several hybrid rail accelerator designs are discussed. Some laboratory experimental observations are presented

  6. MASH Test 3-11 on the T131RC Bridge Rail

    Science.gov (United States)

    2012-10-01

    Texas Department of Transportation (TxDOT) currently uses the TxDOT Type T101RC Bridge Rail, : a steel post and beam bridge rail anchored to the top of concrete curbs. The T101RC Bridge Rail is : 27 inches in height and can be anchored to the top of ...

  7. 31 CFR 515.334 - United States national.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States national. 515.334 Section 515.334 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... of the United States, and which has its principal place of business in the United States. [61 FR...

  8. Wavenumber-domain separation of rail contribution to pass-by noise

    Science.gov (United States)

    Zea, Elias; Manzari, Luca; Squicciarini, Giacomo; Feng, Leping; Thompson, David; Arteaga, Ines Lopez

    2017-11-01

    In order to counteract the problem of railway noise and its environmental impact, passing trains in Europe must be tested in accordance to a noise legislation that demands the quantification of the noise generated by the vehicle alone. However, for frequencies between about 500 Hz and 1600 Hz, it has been found that a significant part of the measured noise is generated by the rail, which behaves like a distributed source and radiates plane waves as a result of the contact with the train's wheels. Thus the need arises for separating the rail contribution to the pass-by noise in that particular frequency range. To this end, the present paper introduces a wavenumber-domain filtering technique, referred to as wave signature extraction, which requires a line microphone array parallel to the rail, and two accelerometers on the rail in the vertical and lateral direction. The novel contributions of this research are: (i) the introduction and application of wavenumber (or plane-wave) filters to pass-by data measured with a microphone array located in the near-field of the rail, and (ii) the design of such filters without prior information of the structural properties of the rail. The latter is achieved by recording the array pressure, as well as the rail vibrations with the accelerometers, before and after the train pass-by. The performance of the proposed method is investigated with a set of pass-by measurements performed in Germany. The results seem to be promising when compared to reference data from TWINS, and the largest discrepancies occur above 1600 Hz and are attributed to plane waves radiated by the rail that so far have not been accounted for in the design of the filters.

  9. 7 CFR 1212.32 - United States Customs Service.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false United States Customs Service. 1212.32 Section 1212... § 1212.32 United States Customs Service. “United States Customs Service” or “Customs” means the United States Customs and Border Protection, an agency of the Department of Homeland Security. Honey Packers and...

  10. Policy issues of transporting spent nuclear fuel by rail

    International Nuclear Information System (INIS)

    Spraggins, H.B.

    1994-01-01

    The topic of this paper is safe and economical transportation of spent nuclear fuel by rail. The cost of safe movement given the liability consequences in the event of a rail accident involving such material is the core issue. Underlying this issue is the ability to access the risk probability of such an accident. The paper delineates how the rail industry and certain governmental agencies perceive and assess such important operational, safety, and economic issues. It also covers benefits and drawbacks of dedicated and regular train movement of such materials

  11. RAIL TRAFFIC VOLUME ESTIMATION BASED ON WORLD DEVELOPMENT INDICATORS

    Directory of Open Access Journals (Sweden)

    Luka Lazarević

    2015-08-01

    Full Text Available European transport policy, defined in the White Paper, supports shift from road to rail and waterborne transport. The hypothesis of the paper is that changes in the economic environment influence rail traffic volume. Therefore, a model for prediction of rail traffic volume applied in different economic contexts could be a valuable tool for the transport planners. The model was built using common Machine Learning techniques that learn from the past experience. In the model preparation, world development indicators defined by the World Bank were used as input parameters.

  12. Nuclear power in the United States

    International Nuclear Information System (INIS)

    Johnston, J.B.

    1985-01-01

    All over the world except in the United States, nuclear energy is a low cost, secure, environmentally acceptable form of energy. In the United States, civilian nuclear power is dead. 112 nuclear power plants have been abandoned or cancelled in the last decade, and there has been no new order for nuclear plants since 1978. It will be fortunate to have 125 operating nuclear plants in the United States in the year 2000. There are almost 90 completed nuclear power plants and about 45 under construction in the United States, but several of those under construction will eventually be abandoned. About 20 % of the electricity in the United States will be generated by nuclear plants in 2000 as compared with 13 % supplied in the last year. Under the present regulatory and institutional arrangement, American electric utilities would not consider to order a new nuclear power plant. Post-TMI nuclear plants became very expensive, and there is also ideological opposition to nuclear power. Coal-firing plants are also in the similar situation. The uncertainty about electric power demand, the cost of money, the inflation of construction cost and regulation caused the situation. (Kako, I.)

  13. Rail assembly for use in a radioactive environment

    International Nuclear Information System (INIS)

    Watts, R.E.

    1989-01-01

    An improved rail assembly and method of construction thereof is disclosed herein that is particularly adapted for use with a crane trolley in a hot cell environment which is exposed to airborne and liquidborne radioactive contaminants. The rail assembly is generally comprised of a support wall having an elongated, rail-housing recess having a floor, side wall and ceiling. The floor of the recess is defined at least in party by the load-bearing surface of a rail, and is substantially flat, level and crevice-free to facilitate the drainage of liquids out of the recess. The ceiling of the recess overhangs and thereby captures trolley wheels within the recess to prevent them from becoming dislodged from the recess during a seismic disturbance. Finally, the interior of the recess includes a power track having a slot for receiving a sliding electrical connector from the crane trolley. The power track is mounted in an upper corner of the recess with its connector-receiving groove oriented downwardly to facilitate the drainage of liquidborne contaminants and to discourage the collection of airborne contaminants within the track

  14. Teen Pregnancy in the United States

    Science.gov (United States)

    ... United States: the contribution of abstinence and improved contraceptive use. Am J Public Health. 2007;97(1):150-6. Lindberg LD, Santelli JS, Desai, S. Understanding the Decline in Adolescent Fertility in the United States, 2007–2012. J ...

  15. To the question of modeling of wheels and rails wear processes

    Directory of Open Access Journals (Sweden)

    S.V. Myamlin

    2013-06-01

    Full Text Available Purpose. There is a need of wear process modeling in the wheel-rail system. This is related to the fact that the wear processes in this system are absolutely different in the initial and final stages. The profile change of rail and, especially, of the wheels caused by the wear significantly affects the rolling stock dynamics, traffic safety and the resource of the wheels and rails. Wear modeling and the traffic safety evaluation requires the accounting of the low frequency component forces (including the modeling of transitional areas affecting the wheel on the side of the rail and carriage in motion of rolling stock, so the statistical analysis is not possible. Methodology. The method of mathematical modeling of the wheel set and the rail interaction was used during the research conducting. Findings. As a result of the modeling of the wheel set motion on the rail track, the mathematic model with 19 freedom degrees was obtained. This model takes into account the axle torque and studies wheels constructions as the components of the mechanical systems, consisting of a hub and tire. Originality. The mathematic model allows evaluating the wear degree of the wheels and rails when using on the rolling stock not only all-metal wheel sets, but also compound ones with the use of spring wheels and independent rotation of semi-axes with the wheels. Practical value. The development of the improved mathematical model of freight car wheel set motion with differential rotation of the wheels and compound axles allows studying the wear processes of wheels and rails.

  16. 77 FR 65446 - Turtle Creek Industrial Railroad, Inc.-Acquisition and Operation Exemption-Consolidated Rail...

    Science.gov (United States)

    2012-10-26

    ... common carrier providing interstate rail service, primarily for Dura-Bond, without first obtaining... Industrial Railroad, Inc.--Acquisition and Operation Exemption--Consolidated Rail Corporation Turtle Creek... Consolidated Rail Corporation (Conrail) and to operate approximately 9.8 miles of rail line between milepost 0...

  17. Investigation on the Nonlinear Control System of High-Pressure Common Rail (HPCR) System in a Diesel Engine

    Science.gov (United States)

    Cai, Le; Mao, Xiaobing; Ma, Zhexuan

    2018-02-01

    This study first constructed the nonlinear mathematical model of the high-pressure common rail (HPCR) system in the diesel engine. Then, the nonlinear state transformation was performed using the flow’s calculation and the standard state space equation was acquired. Based on sliding-mode variable structure control (SMVSC) theory, a sliding-mode controller for nonlinear systems was designed for achieving the control of common rail pressure and the diesel engine’s rotational speed. Finally, on the simulation platform of MATLAB, the designed nonlinear HPCR system was simulated. The simulation results demonstrate that sliding-mode variable structure control algorithm shows favorable control performances and overcome the shortcomings of traditional PID control in overshoot, parameter adjustment, system precision, adjustment time and ascending time.

  18. 75 FR 51160 - Swanson Rail Transfer, L.P.-Lease and Operation Exemption-BDB Company

    Science.gov (United States)

    2010-08-18

    ... truck-rail transfer facility on the property and provide associated rail common carrier services. \\1... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35399] Swanson Rail Transfer, L.P.--Lease and Operation Exemption--BDB Company Swanson Rail Transfer, L.P. (SRT), a noncarrier...

  19. Parametric design studies of toroidal magnetic energy storage units

    International Nuclear Information System (INIS)

    Herring, J.S.

    1990-01-01

    Superconducting magnetic energy storage (SMES) units have a number of advantages as storage devices. Electrical current is the input, output and stored medium, allowing for completely solid-state energy conversion. The magnets themselves have no moving parts. The round-trip efficiency is higher than those for batteries, compressed air or pumped hydro. Output power can be very high, allowing complete discharge of the unit within a few seconds. Finally, the unit can be designed for a very large number of cycles, limited basically by fatigue in the structural components. A small systems code has been written to produce and evaluate self-consistent designs for toroidal superconducting energy storage units. The units can use either low temperature or high temperature superconductors. The coils have 'D' shape where the conductor and its stabilizer/structure is loaded only in tension and the centering forces are borne by a bucking cylinder. The coils are convectively cooled from a cryogenic reservoir in the bore of the coils. The coils are suspended in a cylindrical metal shell which protects the magnet during rail, automotive or shipboard use. It is important to note that the storage unit does not rely on its surroundings for structural support, other than normal gravity and inertial loads. This paper presents designs for toroidal energy storage units produced by the systems code. A wide range of several parameters have been considered, resulting in units storing from 1 MJ to 72 GJ. Maximum fields range from 5 t to 20 T. The masses and volumes of the coils, bucking cylinder, coolant, insulation and outer shell are calculated. For unattended use, the allowable operating time using only the boiloff of the cryogenic fluid for refrigeration is calculated. For larger units, the coils have been divided into modules suitable for normal truck or rail transport. 8 refs., 5 tabs

  20. Parametric design studies of toroidal magnetic energy storage units

    Science.gov (United States)

    Herring, J. Stephen

    Superconducting magnetic energy storage (SMES) units have a number of advantages as storage devices. Electrical current is the input, output and stored medium, allowing for completely solid-state energy conversion. The magnets themselves have no moving parts. The round trip efficiency is higher than those for batteries, compressed air or pumped hydro. Output power can be very high, allowing complete discharge of the unit within a few seconds. Finally, the unit can be designed for a very large number of cycles, limited basically by fatigue in the structural components. A small systems code was written to produce and evaluate self-consistent designs for toroidal superconducting energy storage units. The units can use either low temperature or high temperature superconductors. The coils have D shape where the conductor and its stabilizer/structure is loaded only in tension and the centering forces are borne by a bucking cylinder. The coils are convectively cooled from a cryogenic reservoir in the bore of the coils. The coils are suspended in a cylindrical metal shell which protects the magnet during rail, automotive or shipboard use. It is important to note that the storage unit does not rely on its surroundings for structural support, other than normal gravity and inertial loads. Designs are presented for toroidal energy storage units produced by the systems code. A wide range of several parameters have been considered, resulting in units storing from 1 MJ to 72 GJ. Maximum fields range from 5 T to 20 T. The masses and volumes of the coils, bucking cylinder, coolant, insulation and outer shell are calculated. For unattended use, the allowable operating time using only the boiloff of the cryogenic fluid for refrigeration is calculated. For larger units, the coils were divided into modules suitable for normal truck or rail transport.

  1. Pre-study on the Berlin-Budapest high-speed rail link; Hochgeschwindigkeitsverkehr: Vorstudie zur Strecke Berlin-Budapest

    Energy Technology Data Exchange (ETDEWEB)

    Fengler, W.; Stehle, J. [TU Dresden (Germany). Fakultaet Verkehrswissenschaften ' ' Friedrich List' ' ; Schach, R. [TU Dresden (Germany). Fakultaet Bauingenieurwesen; Stephan, A. [Inst. fuer Bahntechnik GmbH, Dresden/Berlin (Germany)

    2008-07-01

    In a pre-study, the Government of the State of Saxony commissioned a comparison between wheel/rail and maglev technology for high-speed operations on the northern section of the pan-European Corridor IV. From the holistic perspective of the business evaluation and the expected economic impact, it can be concluded that there is a case for establishing a guided high-speed link between Berlin and Budapest and that the plan should be pursued further. Teh pre-study showed that, taking a comprehensive view of investment and operational aspects, the Transrapid technology already stands comparison with wheel/rail technology. (orig.)

  2. High-speed rail with emerging automobiles and aircraft can reduce environmental impacts in California’s future

    International Nuclear Information System (INIS)

    Chester, Mikhail; Horvath, Arpad

    2012-01-01

    Sustainable mobility policy for long-distance transportation services should consider emerging automobiles and aircraft as well as infrastructure and supply chain life-cycle effects in the assessment of new high-speed rail systems. Using the California corridor, future automobiles, high-speed rail and aircraft long-distance travel are evaluated, considering emerging fuel-efficient vehicles, new train designs and the possibility that the region will meet renewable electricity goals. An attributional per passenger-kilometer-traveled life-cycle inventory is first developed including vehicle, infrastructure and energy production components. A consequential life-cycle impact assessment is then established to evaluate existing infrastructure expansion against the construction of a new high-speed rail system. The results show that when using the life-cycle assessment framework, greenhouse gas footprints increase significantly and human health and environmental damage potentials may be dominated by indirect and supply chain components. The environmental payback is most sensitive to the number of automobile trips shifted to high-speed rail, and for greenhouse gases is likely to occur in 20–30 years. A high-speed rail system that is deployed with state-of-the-art trains, electricity that has met renewable goals, and in a configuration that endorses high ridership will provide significant environmental benefits over existing modes. Opportunities exist for reducing the long-distance transportation footprint by incentivizing large automobile trip shifts, meeting clean electricity goals and reducing material production effects. (letter)

  3. Immigration Enforcement Within the United States

    Science.gov (United States)

    2006-04-06

    Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Policy Issues...Remained in the United States, (Washington: Center for Immigration Studies, May 2002). Immigration Enforcement Within the United States Introduction ...interior enforcement lack a border component. For example, fugitive taskforces, investigations of alien slavery and sweatshops , and employer sanctions do

  4. Development of a capacitor powered rail gun for hypervelocity impact studies

    International Nuclear Information System (INIS)

    Shrader, J.E.

    1983-01-01

    Boeing has built and tested several rail gun designs using two different capacitor banks as power sources. For each design, the muzzle velocity predicted with the Boeing Electromagnetic Gun code (BEMG) matched the measured muzzle velocity within 5%, providing gas sealing between the rails and the dielectric of the barrel was maintained. This did not validate the model, but gave reasonable confidence in it. Using the BEMG model, a parametric study was conducted to determine the sensitivity of muzzle velocities between 2 and 5 km/s to the input variables. A practical point design was assumed, and then each parameter individually varied while the others were held constant. The point design assumed an initial velocity of 0.5 km/s and an inductance per unit length (L') of 0.8 x 10 -6 H/m. Other parameters were similar to the earlier designs. The earlier designs tested had no initial velocity, and an L' of 0.3 x 10 6 H/m. A gas gun was assumed to produce the initial velocity, and resulted in only modest increases in muzzle velocity. However, it eliminated a separate make switch, since a foil across the back of the projectile becomes a make switch, and it is expected to substantially reduce rail erosion near the breech of the gun. Rail erosion was a significant problem for repeated firings in earlier designs. The parametric study showed that for the velocities of interest, increasing L' was the single best way to improve gun performance. In a practical gun, this will be achieved by making a two turn barrel, rather than a single turn barrel. The results of this study will be used to design, build and test a small gun (about 9 mm bore) using a 150 kJ capacitor bank as a power source. Using the experience gained with this gun, a large gun (about 20 mm bore) will be designed, built and tested using a 1.3 MJ capacitor bank

  5. The wheel-rail contact friction influence on high speed vehicle model stability

    Directory of Open Access Journals (Sweden)

    Mirosław DUSZA

    2015-09-01

    Full Text Available Right estimating of the coefficient of friction between the wheel and rail is essential in modelling rail vehicle dynamics. Constant value of coefficient of friction is the typical assumption in theoretical studies. But it is obvious that in real circumstances a few factors may have significant influence on the rails surface condition and this way on the coefficient of friction value. For example the weather condition, the railway location etc. Influence of the coefficient of friction changes on high speed rail vehicle model dynamics is presented in this paper. Four axle rail vehicle model were built. The FASTSIM code is employed for calculation of the tangential contact forces between wheel and rail. One coefficient of friction value is adopted in the particular simulation process. To check the vehicle model properties under the influence of wheel-rail coefficient of friction changes, twenty four series of simulations were performed. For three curved tracks of radii R = 3000m, 6000m and  (straight track, the coefficient of friction was changed from 0.1 to 0.8. The results are presented in form of bifurcation diagrams.

  6. Large scale implementation of guided wave based broken rail monitoring

    Science.gov (United States)

    Burger, Francois A.; Loveday, Philip W.; Long, Craig S.

    2015-03-01

    A guided wave ultrasound system has been developed over the past 17 years to detect breaks in continuously welded rail track. Installation of the version 4 system on an 840 km long heavy duty freight line was conducted between January 2013 and June 2014. The system operates in pitch - catch mode with alternate transmit and receive transducers spaced approximately 1km apart. If the acoustic signal is not received at the receive station an alarm is triggered to indicate a break in the rail between the transmit station and the receive station. The system is permanently installed, powered by solar panels and issues broken rail alarms using the GSM network where available, and digital radio technology in other areas. A total of 931 stations were installed and the entire length of rail is interrogated every fifteen minutes. The system operates reliably although some problems involving unreliable GSM communication and theft of solar panels have been experienced. In the first two months of operation four broken rails were detected and train operation was halted temporarily for repairs.

  7. An investigation on the desired properties of friction modifiers for slippery rails

    NARCIS (Netherlands)

    Li, Z.; Arias Cuevas, O.

    2009-01-01

    The adhesion level between wheel and rail has been since the beginning of railway a crucial parameter in the design and operation of rail vehicles. In the last decades, many railway organizations have suffered from low adhesion problems as consequence of the increased exploitation of the rail

  8. Atlanta Rail Yard Study: Evaluation of local-scale air pollution ...

    Science.gov (United States)

    Intermodal rail yards are important nodes in the freight transportation network, where freight is organized and moved from one mode of transport to another, critical equipment is serviced, and freight is routed to its next destination. Rail yard environments are also areas with multiple sources of air pollutant emissions (e.g., heavy-duty vehicles, locomotives, cranes), which may affect local air quality in residential areas nearby. In order to understand emissions and related air quality impacts, two field studies took place over the time span of 2010-2012 to measure air pollution trends in close proximity to the Inman and Tilford rail yard complex in Atlanta, GA. One field study involved long-term stationary monitoring of black carbon, fine particles, and carbon dioxide at two stations nearby the rail yard. In addition, a second field study performed intensive mobile air monitoring for a one month period in the summer of 2012 at a roadway network surrounding the rail yard complex and measured a comprehensive array of pollutants. Real-time mobile particulate measurements included particle counts, extinction coefficient, black carbon via light-absorption and particle incandescence, and particle composition derived by aerosol mass spectrometry. Gas-phase measurements included oxides of nitrogen, sulfur dioxide, carbon dioxide, and air toxics (e.g., benzene). Both sets of measurements determined detectable local influence from rail yard-related emissions.

  9. A 72-dB-SNDR rail-to-rail successive approximation ADC using mismatch calibration techniques

    International Nuclear Information System (INIS)

    Liu Yan; Hua Siliang; Wang Donghui; Hou Chaohuan

    2012-01-01

    When the voltage of an analog input signal is equal to the supply voltage, it is difficult for a conventional successive approximation ADC to correctly convert the analog signal into digital signal. This paper introduces an improved successive approximation ADC, which can convert the rail-to-rail input range and reduce sampling time through a track-and-hold circuit. Comparator offset cancellation and capacitor self-calibration techniques are used in this ADC. Measurement results show that the peak SNDR of this ADC reaches 72 dB and the signal effective bandwidth is up to 1.25 MHz. It consumes 1 mW in the test, and the figure of merit is 123 fJ/conversion-step. (semiconductor integrated circuits)

  10. Valuing Manggarai Station – Soekarno-Hatta International Airport Rail Link Using Stated Preference Approach

    OpenAIRE

    Adi, Wahyu Tamtomo

    2015-01-01

    This study attempts to identify the characteristics and preference of the SHIA airport travelers, estimate the subjective value of in-vehicle time and waiting time by providing choice experiments regarding the available modes in combination with the Airport Rail Link (ARL) service as hypothetical situation, analyze how the values vary according to the socio-demographics of respondents and forecasting the mode sharing and the elasticity based on several scenarios. Five hundred respondents as p...

  11. Development and application of resilient wheels in urban rail transit vehicle

    Directory of Open Access Journals (Sweden)

    Juan WEN

    Full Text Available Urban rail transit vehicles have been more and more attractive to people as a kind of fast, comfortable, energy-saving, environmental protection and safe transportation. But because of the vehicle noise and vibration, urban rail vehicles also face severe challenges. The research of resilient wheels has been continuously developed and improved. Based on the review of development background and structure sorts of resilient wheels, the advantages of resilient wheels are described, and the research status of noise and vibration reducing, infinite element strength analysis, vehicle dynamic analysis and the wheel-rail wear of resilient wheels are discussed. Taking the low-floor LRVs (light rail vehicles in domestic and overseas as example, the development and application of the resilient wheels in city rail transit is described, and the application prospects of the resilient wheels in LRVs in domestic and the future research direction of elastic wheel are discussed.

  12. Semi-supervised rail defect detection from imbalanced image data

    NARCIS (Netherlands)

    Hajizadeh, S.; Nunez Vicencio, Alfredo; Tax, D.M.J.; Acarman, Tankut

    2016-01-01

    Rail defect detection by video cameras has recently gained much attention in both
    academia and industry. Rail image data has two properties. It is highly imbalanced towards the non-defective class and it has a large number of unlabeled data samples available for semisupervised learning

  13. Procedure and applications of combined wheel/rail roughness measurement

    NARCIS (Netherlands)

    Dittrich, M.G.

    2009-01-01

    Wheel-rail roughness is known to be the main excitation source of railway rolling noise. Besides the already standardised method for direct roughness measurement, it is also possible to measure combined wheel-rail roughness from vertical railhead vibration during a train pass-by. This is a different

  14. Train Dwell Time Models for Rail Passenger Service

    Directory of Open Access Journals (Sweden)

    San Hor Peay

    2016-01-01

    Full Text Available In recent years, more studies had been conducted about train dwell time as it is a key parameter of rail system performance and reliability. This paper draws an overview of train dwell time models for rail passenger service from various continents, namely Asia, North America, Europe and Australia. The factors affecting train dwell time are identified and analysed across some rail network operators. The dwell time models developed by various researches are also discussed and reviewed. Finally, the contributions from the outcomes of these models are briefly addressed. In conclusion, this paper suggests that there is a need to further study the factors with strong influence upon dwell time to improve the quality of the train services.

  15. United States advanced technologies

    International Nuclear Information System (INIS)

    Longenecker, J.R.

    1985-01-01

    In the United States, the advanced technologies have been applied to uranium enrichment as a means by which it can be assured that nuclear fuel cost will remain competitive in the future. The United States is strongly committed to the development of advanced enrichment technology, and has brought both advanced gas centrifuge (AGC) and atomic vapor laser isotope separation (AVLIS) programs to a point of significant technical refinement. The ability to deploy advanced technologies is the basis for the confidence in competitive future price. Unfortunately, the development of advanced technologies is capital intensive. The year 1985 is the key year for advanced technology development in the United States, since the decision on the primary enrichment technology for the future, AGC or AVLIS, will be made shortly. The background on the technology selection process, the highlights of AGC and AVLIS programs and the way to proceed after the process selection are described. The key objective is to maximize the sales volume and minimize the operating cost. This will help the utilities in other countries supply low cost energy on a reliable, long term basis. (Kako, I.)

  16. Market size and vertical structure in the rail way industry

    OpenAIRE

    Matsushima, Noriaki; Mizutani, Fumitoshi

    2011-01-01

    We provide a theoretical framework to discuss the relation between market size and vertical structure in the railway industry. The framework is based on a simple downstream monopoly model with two input suppliers, labor forces and the rail infrastructure firm. The operation of the downstream firm (i.e., the train operating firm) generates costs on the rail infrastructure firm. We show that the downstream firm with a larger market size is more likely to integrate with the rail infrastructure f...

  17. Phase I development of an aesthetic, precast concrete bridge rail.

    Science.gov (United States)

    2012-02-01

    Precast concrete bridge rail systems offer several advantages over traditional cast-in-place rail designs, including reduced construction : time and costs, installation in a wide range of environmental conditions, easier maintenance and repair, impro...

  18. Practical reporting with Ruby and Rails

    CERN Document Server

    Berube, David

    2008-01-01

    Business intelligence and real time reporting mechanisms play a major role in any of today s forward looking business plans. With many of these solutions being moved to the Web, the popular Rails framework and its underlying Ruby language are playing a major role alongside web services in building the reporting solutions of tomorrow. Practical Reporting with Ruby and Rails is the first book to comprehensively introduce this popular framework, guiding readers through a wide ranging array of features. Note this isn t a staid guide to generating traditional reports, but rather it shows you how th

  19. The United States and the Arab Gulf Monarchies

    International Nuclear Information System (INIS)

    Kechichian, J.A.

    1999-01-01

    The United States has enduring strategic interests in the Persian Gulf region. To understand these interests and the Usa policy towards the Arab Gulf Monarchies, the french institute of international relations (IFRI) proposes this document. The following chapters are detailed: the United States and the Arab Gulf Monarchies, overview, Chief Unites States Objective: Access to oil, re-evaluating United States Foreign Policy in the Gulf, the second term (Usa strategy). (A.L.B.)

  20. Rail-Guided Multi-Robot System for 3D Cellular Hydrogel Assembly with Coordinated Nanomanipulation

    Directory of Open Access Journals (Sweden)

    Huaping Wang

    2014-08-01

    Full Text Available The 3D assembly of micro-/nano-building blocks with multi-nanomanipulator coordinated manipulation is one of the central elements of nanomanipulation. A novel rail-guided nanomanipulation system was proposed for the assembly of a cellular vascular-like hydrogel microchannel. The system was equipped with three nanomanipulators and was restricted on the rail in order to realize the arbitrary change of the end-effectors during the assembly. It was set up with hybrid motors to achieve both a large operating space and a 30 nm positional resolution. The 2D components such as the assembly units were fabricated through the encapsulation of cells in the hydrogel. The coordinated manipulation strategies among the multi-nanomanipulators were designed with vision feedback and were demonstrated through the bottom-up assembly of the vascular-like microtube. As a result, the multi-layered microchannel was assembled through the cooperation of the nanomanipulation system.

  1. Rail transport systems approach

    CERN Document Server

    2017-01-01

    This book shows how the systems approach is employed by scientists in various countries to solve specific problems concerning railway transport. In particular, the book describes the experiences of scientists from Romania, Germany, the Czech Republic, the UK, Russia, Ukraine, Lithuania and Poland. For many of these countries there is a problem with the historical differences between the railways. In particular, there are railways with different rail gauges, with different signaling and communication systems, with different energy supplies and, finally, with different political systems, which are reflected in the different approaches to the management of railway economies. The book’s content is divided into two main parts, the first of which provides a systematic analysis of individual means of providing and maintaining rail transport. In turn, the second part addresses infrastructure and management development, with particular attention to security issues. Though primarily written for professionals involved...

  2. In-Service Performance and Costs of Methods to Control Urban Rail System Noise

    Science.gov (United States)

    1979-12-01

    This study evaluates the acoustic and economic effectiveness of five methods of controlling wheel/rail noise and vibration on urban rail transit systems, namely: rail grinding, wheel truing, resilient wheels, ring-damped wheels, and welded vs. jointe...

  3. Highway-Rail Crossings Inventory Data

    Data.gov (United States)

    Department of Transportation — The entire National Highway-Rail Crossing Inventory is available in three separate downloadble files. There is a file of all current Public-at-Grade crossings. There...

  4. Simulation and Measurement of Wheel on Rail Fatigue and Wear

    OpenAIRE

    Dirks, Babette

    2015-01-01

    The life of railway wheels and rails has been decreasing in recent years. This is mainly caused by more traffic and running at higher vehicle speed. A higher speed usually generates higher forces, unless compensated by improved track and vehicle designs, in the wheel-rail contact, resulting in more wear and rolling contact fatigue (RCF) damage to the wheels and rails. As recently as 15 years ago, RCF was not recognised as a serious problem. Nowadays it is a serious problem in many countries a...

  5. Shock and vibration environments for large shipping containers on rail cars and trucks

    International Nuclear Information System (INIS)

    Magnuson, C.F.; Wilson, L.T.

    1977-06-01

    The purpose of this study was to provide definitions of shock and vibration environment to which fissile material shipping containers may be exposed during normal shipment by truck and rail cars. The definitions of vibration, shock superimposed on vibration and rail coupling shock result from existing data. The dependence of shock environment, from rail coupling operations, on parameters like cargo weight and shock attenuation couplers was also studied using spring-mass models. These studies show that for rail cars equipped with standard draft gear, the cargo response decreases with increased cargo weight until the springs bottom out. For rail cars equipped with shock attenuation couplers, cargo weight has little effect on cargo response. The study also shows the importance of matching couplers and tiedown stiffnesses to decrease the cargo response. Vibration and shock data samples have been obtained during truck shipment of heavy cargo and the data will be presented in subsequent reports. Similar data need to be obtained for rail shipment of heavy cargo and during rail coupling operations with heavy cargo

  6. Modelling of contact problems involved in ensuring the safety of rail transport

    Directory of Open Access Journals (Sweden)

    Edward Rydygier

    2013-12-01

    Full Text Available Background: Mathematical modelling aids diagnostics the track and rolling stock, as it often for technical reasons it is not possible to obtain a complete set of measurement data required to diagnose the rail and wheel deformation caused by the impact of a rail vehicle on the track. The important issue in a railway diagnostics is to study the effects of contact wheel and rail. Diagnostics investigations of track and rolling stock have a fundamental role in ensuring the safety of transport of passengers and goods. The aim of the study presented in the paper was to develop simulation methods of mathematical modelling of the wheel-rail system useful in the diagnostics of the track and a railway vehicle. Methods: In the paper two ways of modelling were presented and discussed. One of these ways is the method which consists in reducing the contact issue to field issue and solving the identification of the field source in 2-D system. Also presented a different method designed on the basis of the methods using one period energy concept. This method is adapted for modelling the dynamics of the contact wheel-rail for the normal force. It has been shown that the developed modelling methods to effectively support the study on the effects of mechanical and thermal of contact wheel-rail and contribute to the safety of operations.  Results and conclusions:  In the case of field sources identifications two specific issues were examined: the issue of rail torsion and the identification of heat sources in the rail due to exposure the rolling contact wheel-rail. In the case of the method using one period energy concept it was demonstrated the usefulness of this method to the study of energy processes in the contact wheel-rail under the normal periodic force. The future direction of research is to establish cooperation with research teams entrusted with the diagnostic measurements of track and rolling stock.  

  7. 76 FR 77716 - Alternate Passenger Rail Service Pilot Program

    Science.gov (United States)

    2011-12-14

    ...-0108; Notice No. 2] RIN 2130-AC19 Alternate Passenger Rail Service Pilot Program AGENCY: Federal... rule is in response to a statutory mandate that FRA complete a rulemaking proceeding to develop a pilot... enactment of the Passenger Rail Investment and Improvement Act of 2008. The final rule develops this pilot...

  8. 78 FR 46686 - Privacy Act of 1974; Treasury/United States Mint .013-United States Mint National Electronic...

    Science.gov (United States)

    2013-08-01

    ... available publicly. FOR FURTHER INFORMATION CONTACT: For general questions and privacy issues, please... DEPARTMENT OF THE TREASURY Privacy Act of 1974; Treasury/United States Mint .013--United States... Privacy Act of 1974, as amended, 5 U.S.C. 552a, the Department of the Treasury (``Treasury'') and the...

  9. Rail deployment and storage procedure and test for ITER blanket remote maintenance

    International Nuclear Information System (INIS)

    Kakudate, S.; Shibanuma, K.

    2003-01-01

    A concept of rail-mounted vehicle manipulator system has been developed to apply to the maintenance of the ITER blanket composed of ∼400 modules in the vacuum vessel. The most critical issue of the vehicle manipulator system is the feasibility of the deployment and storage of the articulated rail, composed of eight rail links without any driving mechanism in the joints. To solve this issue, a new driving mechanism and procedure for the rail deployment and storage has been proposed, taking account of the repeated operation of the multi-rail links deployed and stored in the same kinematical manner. The new driving mechanism, which is different from those of a usual articulated manipulator or 'articulated boom' equipped with actuators in every joint for movement, is composed of three external mechanisms installed outside the articulated rail, i.e. a vehicle traveling mechanism as main driver and two auxiliary driving mechanisms. A simplified synchronized control of three driving mechanisms has also been proposed, including 'torque-limit control' for suppression of the overload of the mechanisms. These proposals have been tested using a full-scale vehicle manipulator system, in order to demonstrate the proof of principle for rail deployment and storage. As a result, the articulated rail has been successfully deployed and stored within 6 h each, less than the target of 8 h, by means of the three external driving mechanisms and the proposed synchronized control. In addition, the overload caused by an unexpected mismatch of the synchronized control of three driving mechanisms has also been successfully suppressed less than the rated torque by the proposed 'torque-limit control'. It is therefore concluded that the feasibility of the rail deployment and storage of the vehicle manipulator system has been demonstrated

  10. Comparison of experimental and theoretical reaction rail currents, rail voltages, and airgap fields for the linear induction motor research vehicle

    Science.gov (United States)

    Elliott, D. G.

    1977-01-01

    Measurements of reaction rail currents, reaction rail voltages, and airgap magnetic fields in tests of the Linear Induction Motor Research Vehicle (LIMRV) were compared with theoretical calculations from the mesh/matrix theory. It was found that the rail currents and magnetic fields predicted by the theory are within 20 percent of the measured currents and fields at most motor locations in most of the runs, but differ by as much as a factor of two in some cases. The most consistent difference is a higher experimental than theoretical magnetic field near the entrance of the motor and a lower experimental than theoretical magnetic field near the exit. The observed differences between the theoretical and experimental magnetic fields and currents do not account for the differences of as much as 26 percent between the theoretical and experimental thrusts.

  11. Energy efficiency and reliability solutions for rail operations and facilities.

    Science.gov (United States)

    2014-11-01

    The objectives of the study included examining energy consumption of : the facilities comprising the three major rail yards on the New Haven Rail Line as : well as platform stations and identifying energy efficiency and cost savings : opportunities f...

  12. Rail-suicide prevention: Systematic literature review of evidence-based activities.

    Science.gov (United States)

    Barker, Emma; Kolves, Kairi; De Leo, Diego

    2017-09-01

    Rail-related suicide is a relatively rare but extremely lethal method of suicide that can have far-reaching consequences. The aim of the systematic literature review was to analyze the existing literature on the effectiveness of rail-suicide prevention activities. Databases used were Scopus, Medline, and ProQuest. The search terms used were "suicid*," "prevent*," "rail*," or "train." English-language studies published in peer-reviewed journals between 1 January 1990 and 30 April 2015 that presented an overview of rail-related suicide prevention activities and included an analysis of effectiveness were used. We retrieved 1,229 results in the original search with nine papers presenting empirical evidence. Three studies in the review analyzed the effectiveness of platform screen doors and another three analyzed the installation of blue lights, two papers analyzed the effectiveness of suicide pits, and one included the influence of media reporting guidelines. Platform screen doors, suicide pits, blue lights, and improved media guidelines all have the potential to reduce rail-related suicide events and deaths. The review was restricted to English-language peer-reviewed papers published within the chosen time period. © 2016 John Wiley & Sons Australia, Ltd.

  13. 39 CFR 221.1 - The United States Postal Service.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false The United States Postal Service. 221.1 Section 221.1 Postal Service UNITED STATES POSTAL SERVICE ORGANIZATION AND ADMINISTRATION GENERAL ORGANIZATION § 221.1 The United States Postal Service. The United States Postal Service was established as an...

  14. No-go theorem for passive single-rail linear optical quantum computing.

    Science.gov (United States)

    Wu, Lian-Ao; Walther, Philip; Lidar, Daniel A

    2013-01-01

    Photonic quantum systems are among the most promising architectures for quantum computers. It is well known that for dual-rail photons effective non-linearities and near-deterministic non-trivial two-qubit gates can be achieved via the measurement process and by introducing ancillary photons. While in principle this opens a legitimate path to scalable linear optical quantum computing, the technical requirements are still very challenging and thus other optical encodings are being actively investigated. One of the alternatives is to use single-rail encoded photons, where entangled states can be deterministically generated. Here we prove that even for such systems universal optical quantum computing using only passive optical elements such as beam splitters and phase shifters is not possible. This no-go theorem proves that photon bunching cannot be passively suppressed even when extra ancilla modes and arbitrary number of photons are used. Our result provides useful guidance for the design of optical quantum computers.

  15. Laser vibrometer measurement of guided wave modes in rail track

    CSIR Research Space (South Africa)

    Loveday, PW

    2014-11-01

    Full Text Available ) in the laboratory and on an operational rail track (with S-4 60-SAR profile) and example results are presented in this section. The measurements 5 were performed using a Polytec PSV-400-M2-20 high frequency scanning vibrometer 6 equipped with the VD-09 velocity...Hz on operational rail track and to identify the modes that are capable of 16 propagating large distances. 17 18 KEYWORDS: Semi-analytical finite element method; modes of guided wave 19 propagation; laser vibrometer measurement; rail track 20 PACs...

  16. UNITED STATES DURING THE COLD WAR 1945-1990

    Directory of Open Access Journals (Sweden)

    Novita Mujiyati

    2016-02-01

    Full Text Available United States and the Soviet Union is a country on the part of allies who emerged as the winner during World War II. However, after reaching the Allied victory in the situation soon changed, man has become an opponent. United States and the Soviet Union are competing to expand the influence and power. To compete the United States strive continuously strengthen itself both in the economic and military by establishing a defense pact and aid agencies in the field of economy. During the Cold War the two are not fighting directly in one of the countries of the former Soviet Union and the United States. However, if understood, teradinya the Korean War and the Vietnam War is a result of tensions between the two countries and is a direct warfare conducted by the United States and the Soviet Union. Cold War ended in conflict with the collapse of the Soviet Union and the United States emerged as the winner of the country.

  17. Causal analysis of passenger train accidents on freight rail corridors.

    Science.gov (United States)

    2013-11-01

    A number of economic, technical and political factors have limited the development of new, dedicated, very-high-speed rail systems in North America. Consequently, most, near-term development of improved or expanded passenger rail service in the U.S. ...

  18. Energy study of rail passenger transportation. Volume 2. Description of operating systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, C.; Ellis, H. T.; Wilhelm, J. P.

    1979-08-01

    The rail passenger systems of the US are described in terms of selected physical, operating, and economic characteristics, and relates services rendered to energy usage and costs. Rail passenger transportation exists in 4 distinct forms: intercity railroads, suburban railroads, heavy-rail transit, and light-rail transit. Each form varies in technical equipment, design of facilities, operating practices, size of systems. Specific data for the national rail passenger network and the Boston, Chicago, Cleveland, New York, Philadelphia, Pittsburgh, and San Francisco regions and the Washington Metropolitan area transit authority are presented.

  19. Study on Rail Profile Optimization Based on the Nonlinear Relationship between Profile and Wear Rate

    Directory of Open Access Journals (Sweden)

    Jianxi Wang

    2017-01-01

    Full Text Available This paper proposes a rail profile optimization method that takes account of wear rate within design cycle so as to minimize rail wear at the curve in heavy haul railway and extend the service life of rail. Taking rail wear rate as the object function, the vertical coordinate of rail profile at range optimization as independent variable, and the geometric characteristics and grinding depth of rail profile as constraint conditions, the support vector machine regression theory was used to fit the nonlinear relationship between rail profile and its wear rate. Then, the profile optimization model was built. Based on the optimization principle of genetic algorithm, the profile optimization model was solved to achieve the optimal rail profile. A multibody dynamics model was used to check the dynamic performance of carriage running on optimal rail profile. The result showed that the average relative error of support vector machine regression model remained less than 10% after a number of training processes. The dynamic performance of carriage running on optimized rail profile met the requirements on safety index and stability. The wear rate of optimized profile was lower than that of standard profile by 5.8%; the allowable carrying gross weight increased by 12.7%.

  20. 78 FR 27857 - United States Standards for Wheat

    Science.gov (United States)

    2013-05-13

    ... RIN 0580-AB12 United States Standards for Wheat AGENCY: Grain Inspection, Packers and Stockyards... (GIPSA) is revising the United States Standards for Wheat under the United States Grain Standards Act (USGSA) to change the definition of Contrasting classes (CCL) in the class Hard White wheat. This change...

  1. Tuberculosis along the United States-Mexico border, 1993-2001.

    Science.gov (United States)

    Schneider, Eileen; Laserson, Kayla F; Wells, Charles D; Moore, Marisa

    2004-07-01

    Tuberculosis (TB) is a leading public health problem and a recognized priority for the federal Governments of both Mexico and the United States of America. The objectives of this research, primarily for the four states in the United States that are along the border with Mexico, were to: (1) describe the epidemiological situation of TB, (2) identify TB risk factors, and (3) discuss tuberculosis program strategies. We analyzed tuberculosis case reports collected from 1993 through 2001 by the tuberculosis surveillance system of the United States. We used those data to compare TB cases mainly among three groups: (1) Mexican-born persons in the four United States border states (Arizona, California, New Mexico, and Texas), (2) persons in those four border states who had been born in the United States, and (3) Mexican-born persons in the 46 other states of the United States, which do not border Mexico. For the period from 1993 through 2001, of the 16 223 TB cases reported for Mexican-born persons in the United States, 12 450 of them (76.7%) were reported by Arizona, California, New Mexico, and Texas. In those four border states overall in 2001, tuberculosis case rates for Mexican-born persons were 5.0 times as high as the rates for persons born in the United States; those four states have 23 counties that directly border on Mexico, and the ratio in those counties was 5.8. HIV seropositivity, drug and alcohol use, unemployment, and incarceration were significantly less likely to be reported in Mexican-born TB patients from the four border states and the nonborder states than in patients born in the United States from the four border states (P pulmonary tuberculosis patients who were 18-64 years of age and residing in the four border states, the Mexican-born patients were 3.6 times as likely as the United States-born patients were to have resistance to at least isoniazid and rifampin (i. e., to have multidrug-resistant TB) and twice as likely to have isoniazid resistance

  2. Rail Trails and Property Values: Is There an Association?

    Science.gov (United States)

    Hartenian, Ella; Horton, Nicholas J.

    2015-01-01

    The Rail Trail and Property Values dataset includes information on a set of n = 104 homes which sold in Northampton, Massachusetts in 2007. The dataset provides house information (square footage, acreage, number of bedrooms, etc.), price estimates (from Zillow.com) at four time points, location, distance from a rail trail in the community, biking…

  3. Global Entrepreneurship and the United States

    Science.gov (United States)

    2010-09-01

    Global Entrepreneurship and the United States by Zoltan J. Acs Laszlo Szerb Ruxton, MD 21204 for under contract number SBAHQ-09...SUBTITLE Global Entrepreneurship and the United States 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...3 2.1. Assessing Entrepreneurship ..................................................................................4 2.2. Stages of Development

  4. 75 FR 25925 - United States Mint

    Science.gov (United States)

    2010-05-10

    ... Committee May 25, 2010 Public Meeting. SUMMARY: Pursuant to United States Code, Title 31, section 5135(b)(8... scheduled for May 25, 2010. Date: May 25, 2010. Time: 9 a.m. to 12 p.m. Location: 8th Floor Board Room, United States Mint, 801 9th Street, NW., Washington, DC 20220. Subject: Review and discuss obverse and...

  5. Deviation rectification for dynamic measurement of rail wear based on coordinate sets projection

    International Nuclear Information System (INIS)

    Wang, Chao; Ma, Ziji; Li, Yanfu; Liu, Hongli; Zeng, Jiuzhen; Jin, Tan

    2017-01-01

    Dynamic measurement of rail wear using a laser imaging system suffers from random vibrations in the laser-based imaging sensor which cause distorted rail profiles. In this paper, a simple and effective method for rectifying profile deviation is presented to address this issue. There are two main steps: profile recognition and distortion calibration. According to the constant camera and projector parameters, efficient recognition of measured profiles is achieved by analyzing the geometric difference between normal profiles and distorted ones. For a distorted profile, by constructing coordinate sets projecting from it to the standard one on triple projecting primitives, including the rail head inner line, rail waist curve and rail jaw, iterative extrinsic camera parameter self-compensation is implemented. The distortion is calibrated by projecting the distorted profile onto the x – y plane of a measuring coordinate frame, which is parallel to the rail cross section, to eliminate the influence of random vibrations in the laser-based imaging sensor. As well as evaluating the implementation with comprehensive experiments, we also compare our method with other published works. The results exhibit the effectiveness and superiority of our method for the dynamic measurement of rail wear. (paper)

  6. Deviation rectification for dynamic measurement of rail wear based on coordinate sets projection

    Science.gov (United States)

    Wang, Chao; Ma, Ziji; Li, Yanfu; Zeng, Jiuzhen; Jin, Tan; Liu, Hongli

    2017-10-01

    Dynamic measurement of rail wear using a laser imaging system suffers from random vibrations in the laser-based imaging sensor which cause distorted rail profiles. In this paper, a simple and effective method for rectifying profile deviation is presented to address this issue. There are two main steps: profile recognition and distortion calibration. According to the constant camera and projector parameters, efficient recognition of measured profiles is achieved by analyzing the geometric difference between normal profiles and distorted ones. For a distorted profile, by constructing coordinate sets projecting from it to the standard one on triple projecting primitives, including the rail head inner line, rail waist curve and rail jaw, iterative extrinsic camera parameter self-compensation is implemented. The distortion is calibrated by projecting the distorted profile onto the x-y plane of a measuring coordinate frame, which is parallel to the rail cross section, to eliminate the influence of random vibrations in the laser-based imaging sensor. As well as evaluating the implementation with comprehensive experiments, we also compare our method with other published works. The results exhibit the effectiveness and superiority of our method for the dynamic measurement of rail wear.

  7. 31 CFR 515.330 - Person within the United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Person within the United States. 515... Definitions § 515.330 Person within the United States. (a) The term person within the United States, includes: (1) Any person, wheresoever located, who is a resident of the United States; (2) Any person actually...

  8. 45 CFR 212.7 - Repayment to the United States.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 2 2010-10-01 2010-10-01 false Repayment to the United States. 212.7 Section 212... UNITED STATES CITIZENS RETURNED FROM FOREIGN COUNTRIES § 212.7 Repayment to the United States. (a) An..., any or all of the cost of such assistance to the United States, except insofar as it is determined...

  9. 20 CFR 416.215 - You leave the United States.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false You leave the United States. 416.215 Section... Eligible § 416.215 You leave the United States. You lose your eligibility for SSI benefits for any month during all of which you are outside of the United States. If you are outside of the United States for 30...

  10. 37 CFR 1.412 - The United States Receiving Office.

    Science.gov (United States)

    2010-07-01

    ... Information § 1.412 The United States Receiving Office. (a) The United States Patent and Trademark Office is a Receiving Office only for applicants who are residents or nationals of the United States of America. (b) The... “United States Receiving Office” or by the abbreviation “RO/US.” (c) The major functions of the Receiving...

  11. Fleet servicing facilities for testing and maintaining rail and truck radioactive waste transport systems

    International Nuclear Information System (INIS)

    Watson, C.D.; Hudson, B.J.; Preston, M.K.; Keith, D.A.; McCreery, P.N.; Knox, W.; Easterling, E.M.; Lamprey, A.S.; Wiedemann, G.

    1980-01-01

    This paper examines feasibility design concepts and feasibility studies of Fleet Servicing Facilities (FSF). Such facilities are intended to be used for routine servicing, preventive maintenance, and for performing requalification license compliance tests and inspections, minor repairs, and decontamination of both the transportation casks and their associated rail cars or tractor-trailers. None of the waste handling plants in the United States presently receiving radioactive wastes have an onsite FSF, nor is there an existing third party facility providing all of these services. This situation has caused the General Accounting Office to express concern regarding the quality of waste transport system maintenance once the transport system is placed into service. Thus a need is indicated for FSFs or their equivalent at various radioactive materials receiving sites. This paper also compares the respective capital costs and operating characteristics of the following three concepts of a spent fuel cask transportation FSF; integrated FSF, colocated FSF, and independent FSF

  12. Delphi's new direct acting common rail injection system; Das neue Direct Acting Common Rail System von Delphi

    Energy Technology Data Exchange (ETDEWEB)

    Schoeppe, Detlev; Zuelch, Stefan; Geurts, Derk; Gris, Christian; Jorach, Rainer W. [Delphi Diesel Systems, Europe (United Kingdom)

    2009-07-01

    With the serial start of the Direct Acting Common Rail injection system with 2.000 bar Delphi Diesel Systems could supplement its product portfolio with a valuable component. In Delphi's directly propelled Common Rail injector, the Injection needle directly is set in operation with the help of a piezo-ceramic actuator instead of only controlling this with a conventional servo-hydraulic circuit indirectly. This enables a fast opening and closing of the nozzle needle possible independently from the rail pressure. The process of injection is controllable accurately at any time with the again developed two-stage needle movement amplifier. The additionally in the injector integrated fuel storage works as a 'Rail in the Injector' and improves the quality particularly during multiple injection. The injector completely works leakage-free and thereby helps to reach the future CO{sub 2} targets. The use of piezo-actuators as driving force behind the directly working injector leads to a set of requirements to the electronics. A control electronics was developed in order to head optimally the Direct Acting Injector. The sum of all advantages of the Direct Acting of CR systems enables lowest emissions with simultaneously small fuel consumption while new dimensions are reached with power density and engine torque. The authors of the contribution under consideration report on the construction, on the work principle of the Direct Acting CR system and on its performance characteristics as a basis for the premium diesel engine.

  13. 75 FR 51158 - BDB Company-Acquisition Exemption-Consolidated Rail Corporation

    Science.gov (United States)

    2010-08-18

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35398] BDB Company--Acquisition Exemption--Consolidated Rail Corporation BDB Company (BDB), a noncarrier, has filed a verified notice of exemption under 49 CFR 1150.31 to acquire from Consolidated Rail Corporation a parcel of land...

  14. Risk of transporting plutonium dioxide and liquid plutonium nitrate by truck and rail

    International Nuclear Information System (INIS)

    Williams, L.D.; Hall, R.J.

    1976-07-01

    Results are summarized of the risk assessments of shipping PuO 2 powder and liquid Pu nitrate by truck and rail in the U.S. In the analysis method used, the system is described, potential release sequences are identified and evaluated (fault tree used), and the system risk is assessed. It is concluded that: there is little difference in risk in shipping PuO 2 by rail and by truck; there also is little change in risk in shipping PuO 2 by rail and by truck; there also is little change in risk for liquid shipment; the vermiculite loss is somewhat less important in rail shipment; and the response of the L-10 container to crush is more important in rail transport

  15. The economic effects of high speed rail investment

    OpenAIRE

    de Rus, Ginés

    2008-01-01

    The allocation of traffic between different transport modes follows transport user decisions which depend on the generalized cost of travel in the available alternatives. High Speed Rail (HSR) investment is a government decision with significant effects on the generalized cost of rail transport; and therefore on the modal split in corridors where private operators compete for traffic and charge prices close to total producer costs (infrastructure included). The rationale for HSR investment is...

  16. A Preliminary Review of Fatigue Among Rail Staff

    OpenAIRE

    Jialin Fan; Andrew P. Smith

    2018-01-01

    Background: Fatigue is a severe problem in the rail industry, which may jeopardize train crew's health and safety. Nonetheless, a preliminary review of all empirical evidence for train crew fatigue is still lacking. The aim of the present paper is, therefore, to provide a preliminary description of occupational fatigue in the rail industry. This paper reviews the literature with the research question examining the risk factors associated with train crew fatigue, covering both papers published...

  17. Surface crack formation on rails at grinding induced martensite white etching layers

    DEFF Research Database (Denmark)

    Rasmussen, Carsten Jørn; Fæster, Søren; Dhar, Somrita

    2017-01-01

    The connection between profile grinding of rails, martensite surface layers and crack initiation has been investigated using visual inspection, optical microscopy and 3D X-ray computerized tomography. Newly grinded rails were extracted and found to be covered by a continuous surface layer...... of martensite with varying thickness formed by the grinding process. Worn R350HT and R200 rails were extracted from the Danish rail network as they had transverse bands resembling grinding marks on the running surface. The transverse bands were shown to consist of martensite which had extensive crack formation...... at the martensite/pearlite interface. The cracks in R350HT propagated down into the rail while those in the soft R200 returned to the surface causing only very small shallow spallation. The transverse bands had the same shape, size, orientation, location and periodicity which would be expected from grinding marks...

  18. The United States and the Kurds: Case Studies in United States Engagement

    National Research Council Canada - National Science Library

    Lambert, Peter

    1997-01-01

    ..., between 1969- 1975, and 1990-1996. Both eras saw the United States able to influence events relating to the Kurds in support of a larger regional policy, only to find no easy solution to the Kurdish quest for autonomy...

  19. United States rejoin ITER

    International Nuclear Information System (INIS)

    Roberts, M.

    2003-01-01

    Upon pressure from the United States Congress, the US Department of Energy had to withdraw from further American participation in the ITER Engineering Design Activities after the end of its commitment to the EDA in July 1998. In the years since that time, changes have taken place in both the ITER activity and the US fusion community's position on burning plasma physics. Reflecting the interest in the United States in pursuing burning plasma physics, the DOE's Office of Science commissioned three studies as part of its examination of the option of entering the Negotiations on the Agreement on the Establishment of the International Fusion Energy Organization for the Joint Implementation of the ITER Project. These were a National Academy Review Panel Report supporting the burning plasma mission; a Fusion Energy Sciences Advisory Committee (FESAC) report confirming the role of ITER in achieving fusion power production, and The Lehman Review of the ITER project costing and project management processes (for the latter one, see ITER CTA Newsletter, no. 15, December 2002). All three studies have endorsed the US return to the ITER activities. This historical decision was announced by DOE Secretary Abraham during his remarks to employees of the Department's Princeton Plasma Physics Laboratory. The United States will be working with the other Participants in the ITER Negotiations on the Agreement and is preparing to participate in the ITA

  20. Depredation of the California Ridgway’s rail: Causes and distribution

    Science.gov (United States)

    Casazza, Michael L.; Overton, Cory T.; Bui, Thuy-Vy D.; Takekawa, John Y.; Merritt, Angela M.; Hull, J.M.

    2016-01-01

    We studied the causes of mortality for the California Ridgway’s rail at multiple tidal marshes in the San Francisco Bay Estuary, California. We radio-marked 196 individual rails and examined the evidence from 152 recovered California Ridgway’s rail mortalities from our radio-marked sample and determined plausible cause of death from a wide array of evidence. We also included 10 additional California Ridgway’s rail mortalities (unmarked) that we encountered during our normal field operations. We assigned a likely cause of death to 130 of the recoveries, of which 127 were determined to be caused by predation. Of those, 103 could be divided into class of cause (avian or mammalian), and avian predators were responsible for 64% of those events. Primary predators identified include domestic or feral cats, red fox, owl, and northern harrier. We did find seasonal differences between avian and mammalian predation rates, with higher proportions of avian predation in the winter and early spring. Time of day and tide height

  1. United States Stateplane Zones - NAD83

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — U.S. State Plane Zones (NAD 1983) represents the State Plane Coordinate System (SPCS) Zones for the 1983 North American Datum within United States.

  2. United States Stateplane Zones - NAD27

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — U.S. State Plane Zones (NAD 1927) represents the State Plane Coordinate System (SPCS) Zones for the 1927 North American Datum within United States.

  3. 75 FR 41276 - US Rail Partners, Ltd. and Blackwell Northern Gateway Railroad Company-Continuance in Control...

    Science.gov (United States)

    2010-07-15

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35384] US Rail Partners...). Applicants state that EBGR intends to file a notice for a modified certificate of public convenience and... the Colebrookdale Line, from Berks County, Pa. USRP currently controls through stock ownership two...

  4. Present state of electric power business in United States and Europe

    International Nuclear Information System (INIS)

    Onishi, Kenichi

    2011-01-01

    This article reported present state of nuclear power and electric power business in United States and Europe after Fukushima Daiichi Accident. As for the trend of demand and supply of electric power and policy, the accident forced Germany possibly to proceed with phase-out of nuclear power, but France and United States to sustain nuclear power with no great change of energy policy at this moment. As for the trend of electric power market, there was not state in United States with liberalized retail market of electric power after rolling blackouts occurred in California State in the early 2000s. In Germany proceeding with renewable energy introduction, renewable electricity fed into the grid was paid for by the network operators at fixed tariffs and the costs passed on to electricity consumers were increasing. Renewable Portfolio Standards (RPS) in United States forced the state to introduction of renewable energy to some ratio, and Feed-in Tariff (FIT) introduced in EU in 1990s lead to introduction of a large amount of renewable electricity targeted in 2020. Huge amount of wind power introduction brought about several problems to solve such that excess electric power above domestic demand had bad effects on grids in neighboring region. Enforcement of power transmission lines was also needed with increase of maximum electric power as well as introduction of a large amount of renewable electricity. (T. Tanaka)

  5. Effects of anchoring and arc structure on the control authority of a rail plasma actuator

    International Nuclear Information System (INIS)

    Choi, Young-Joon; Gray, Miles; Sirohi, Jayant; Raja, Laxminarayan L

    2017-01-01

    Experiments were conducted on a rail plasma actuator (RailPAc) with different electrode cross sections (rails or rods) to assess methods to improve the actuation authority, defined as the impulse generated for a given electrical input. The arc was characterized with electrical measurements and high-speed images, while impulse measurements quantified the actuation authority. A RailPAc power supply capable of delivering  ∼1 kA of current at  ∼100 V was connected to rod electrodes (free-floating with circular cross-section) and rail electrodes (flush-mounted in a flat plate with rectangular cross-section). High-speed images show that the rail electrodes cause the arc to anchor itself to the anode electrode and transit in discrete jumps, while rod electrodes permit the arc to transit smoothly without anchoring. The impulse measurements reveal that the anchoring reduces the actuation authority by  ∼21% compared to a smooth transit, and the effect of anchoring can be suppressed by reducing the gap between the rails to 2 mm. The study further demonstrates that if a smooth transit is achieved, the control authority can be increased with a larger gap and larger arc current. In conclusion, the actuation authority of a RailPAc can be maximized by carefully choosing a gap width that prevents anchoring. Further study is warranted to increase the RailPAc actuation authority by introducing multiple turns of wires beneath the RailPAc to augment the induced magnetic field. (paper)

  6. Development of rail access to the proposed repository site at Yucca Mountain

    International Nuclear Information System (INIS)

    Standish, P.N.; Seidler, P.E.; Andrews, W.B.; Shearin, G.

    1991-01-01

    In accordance with the Nuclear Waste Policy Amendment Act of 1987, Yucca Mountain was designated as the initial site to be investigated as a potential repository for the disposal of high-level radioactive waste. The Yucca Mountain site is an undeveloped area located on the southwestern edge of the Nevada Test Site (NTS), about 100 miles northwest of Las Vegas. The site currently lacks rail service or an existing right-of-way. If the Yucca Mountain site is found suitable for the repository, rail service is considered desirable by the Office of Civilian Radioactive Waste Management (OCRWM) program because of the potential of rail transportation to reduce (1) costs and (2) number of shipments, relative to highway transportation. Therefore, it is necessary to conduct a study to determine (1) that there are alignments for a potential rail line from existing mainline railroads to Yucca Mountain and (2) that these are consistent with present rail design standards and are acceptable relative to environmental and land access considerations

  7. Bubble propagation on a rail: a concept for sorting bubbles by size

    Science.gov (United States)

    Franco-Gómez, Andrés; Thompson, Alice B.; Hazel, Andrew L.; Juel, Anne

    We demonstrate experimentally that the introduction of a rail, a small height constriction, within the cross-section of a rectangular channel could be used as a robust passive sorting device in two-phase fluid flows. Single air bubbles carried within silicone oil are generally transported on one side of the rail. However, for flow rates marginally larger than a critical value, a narrow band of bubble sizes can propagate (stably) over the rail, while bubbles of other sizes segregate to the side of the rail. The width of this band of bubble sizes increases with flow rate and the size of the most stable bubble can be tuned by varying the rail width. We present a complementary theoretical analysis based on a depth-averaged theory, which is in qualitative agreement with the experiments. The theoretical study reveals that the mechanism relies on a non-trivial interaction between capillary and viscous forces that is fully dynamic, rather than being a simple modification of capillary static solutions.

  8. Death in the United States, 2011

    Science.gov (United States)

    ... Order from the National Technical Information Service NCHS Death in the United States, 2011 Recommend on Facebook ... 2011 SOURCE: National Vital Statistics System, Mortality. Do death rates vary by state? States experience different mortality ...

  9. Parking Space Occupancy at Rail Stations in Klang Valley

    Directory of Open Access Journals (Sweden)

    Ho Phooi Wai

    2017-01-01

    Full Text Available The development of Klang Valley Integrated Rapid Transit system in Klang Valley, Malaysia has been quickly gaining momentum during the recent years. There will be two new MRT lines (MRT Line 1 and MRT Line 2 and one new LRT line (LRT Line 3 extended from the current integrated rail transit system by year 2020 with more than 90 new rail stations. With the substantial addition of potential rail passengers, there are doubts whether the existing Park and Ride facilities in Klang Valley are able to accommodate the future parking space demand at rail stations. This research studies the parking occupancy at various Park and Ride facilities in Klang Valley namely Taman Jaya, Asia Jaya, Taman Paramount, Taman Bahagia and Kelana Jaya by applying the non-conventional method utilizing Google Earth imageries. Results showed that the parking occupancy rate at these LRT stations were 100% or more before the commencement of LRT extension (Kelana Jaya and Ampang Lines in 2016 and in the range of 36% to 100% after the commencement of LRT extension due to the additionally built car parks and changes in parking pattern with dispersed passenger traffic.

  10. 31 CFR 103.39 - Person outside the United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Person outside the United States. 103... Person outside the United States. For the purposes of this subpart, a remittance or transfer of funds, or... the United States, shall be deemed to be a remittance or transfer to a person outside the United...

  11. BIM Interoperability Limitations: Australian and Malaysian Rail Projects

    Directory of Open Access Journals (Sweden)

    Kenley Russell

    2016-01-01

    Full Text Available Building information modelling (BIM is defined as a process involving the generation and management of digital representation of physical and functional characteristics of a facility. The purpose of interoperability in integrated or “open” BIM is to facilitate the information exchange between different digital systems, models and tools. There has been effort towards data interoperability with development of open source standards and object-oriented models, such as industry foundation classes (IFC for vertical infrastructure. However, the lack of open data standards for the information exchange for horizontal infrastructure limits the adoption and effectiveness of integrated BIM. The paper outlines two interoperability issues for construction of rail infrastructure. The issues are presented in two case study reports, one from Australia and one from Malaysia. The each case study includes: a description of the project, the application of BIM in the project, a discussion of the promised BIM interoperability solution plus the identification of the unresolved lack of interoperability for horizontal infrastructure project management. The Moreton Bay Rail project in Australia introduces general software interoperability issues. The Light Rail Extension project in Kuala Lumpur outlines an example of the integration problems related to two different location data structures. The paper highlights how the continuing lack of data interoperability limits utilisation of integrated BIM for horizontal infrastructure rail projects.

  12. Energy problems of the United States

    International Nuclear Information System (INIS)

    Pertuzio, A.

    2006-01-01

    The united states are the third world producer of oil which accounts for 440% of world production and 20 million barrels/day of which 60% are imported. That dependence on imports is likely to increase in the next decades. Such supplies and their security are therefore a fundamental factor of the United States foreign policy in combination with their political, economic and strategic objectives in a world both unsure and dangerous

  13. Household pesticide usage in the United States.

    Science.gov (United States)

    Savage, E P; Keefe, T J; Wheeler, H W; Mounce, L; Helwic, L; Applehans, F; Goes, E; Goes, T; Mihlan, G; Rench, J; Taylor, D K

    1981-01-01

    A total of 10,000 U.S. households in 25 standard metropolitan statistical areas and 25 counties were included in the United States. More than 8,200 households granted an interview. Nine of every ten households in the United States used some types of pesticide in their house, garden, or yard. Households in the southeastern United States used the most pesticides. Although more than 500 different pesticide formulations were used by the sampled households, 15 pesticides accounted for 65.5% of all pesticides reported in this study. Thirteen of these 15 pesticides were insecticides, one was a herbicide, and one was a rodenticide.

  14. Social exclusion and high speed rail: The case study of Spain

    Energy Technology Data Exchange (ETDEWEB)

    Pagliara, F.; Menicocci, F.; Vassallo, J.M.; Gomez, J.

    2016-07-01

    Very few contributions in the literature have dealt with the issue of social exclusion related to High Speed Rail systems. The objective of this manuscript is to understand what are the factors excluding users from choosing High Speed Rail services considering as case study Spain. For this purpose, a Revealed Preference survey was employed in November and December 2015. A questionnaire was submitted to users of the Spanish transport systems travelling for long distance-journeys. The aim was that of investigating their perception of High Speed Rail system and the factors inhibiting passengers or excluding them from its use. Data about their socioeconomic characteristics were collected as well. The main result of the survey has been that a relationship between social exclusion and High Speed Rail in Spain is present, especially in terms of geographical exclusion. (Author)

  15. USDOE Top-of-Rail Lubricant Project; FINAL

    International Nuclear Information System (INIS)

    Mohumad F. Alzoubi; George R. Fenske; Robert A. Erck; Amrit S. Boparai

    2002-01-01

    Lubrication of wheel/rail systems has been recognized for the last two decades as a very important issue for railroads. Energy savings and less friction and wear can be realized if a lubricant can be used at the wheel/rail interface. On the other hand, adverse influences are seen in operating and wear conditions if improper or excessive lubrication is used. Also, inefficiencies in lubrication need to be avoided for economic and environmental reasons. The top-of-rail (TOR) lubricant concept was developed by Texaco Corporation to lubricate wheels and rails effectively and efficiently. Tranergy Corporation has been developing its SENTRAEN 2000(trademark) lubrication system for the last ten years, and this revolutionary new high-tech on-board rail lubrication system promises to dramatically improve the energy efficiency, performance, safety, and track environment of railroads. The system is fully computer-controlled and ensures that all of the lubricant is consumed as the end of the train passes. Lubricant quantity dispensed is a function of grade, speed, curve, and axle load. Tranergy also has its LA4000(trademark) wheel and rail simulator, a lubrication and traction testing apparatus. The primary task of this project was collecting and analyzing the volatile and semivolatile compounds produced as the lubricant was used. The volatile organic compounds were collected by Carbotrap cartridges and analyzed by adsorption and gas chromatography/mass spectrometry (GC/MS). The semivolatile fraction was obtained by collecting liquid that dripped from the test wheel. The collected material was also analyzed by GC/MS. Both of these analyses were qualitative. The results indicated that in the volatile fraction, the only compounds on the Environmental Protection Agency's (EPA) Superfund List of Analytes detected were contaminants either in the room air or from other potential contamination sources in the laboratory. Similarly, in the semivolatile fraction none of the detected

  16. An Asynchronous IEEE Floating-Point Arithmetic Unit

    Directory of Open Access Journals (Sweden)

    Joel R. Noche

    2007-12-01

    Full Text Available An asynchronous floating-point arithmetic unit is designed and tested at the transistor level usingCadence software. It uses CMOS (complementary metal oxide semiconductor and DCVS (differentialcascode voltage switch logic in a 0.35 µm process using a 3.3 V supply voltage, with dual-rail data andsingle-rail control signals using four-phase handshaking.Using 17,085 transistors, the unit handles single-precision (32-bit addition/subtraction, multiplication,division, and remainder using the IEEE 754-1985 Standard for Binary Floating-Point Arithmetic, withrounding and other operations to be handled by separate hardware or software. Division and remainderare done using a restoring subtractive algorithm; multiplication uses an additive algorithm. Exceptionsare noted by flags (and not trap handlers and the output is in single-precision.Previous work on asynchronous floating-point arithmetic units have mostly focused on single operationssuch as division. This is the first work to the authors' knowledge that can perform floating-point addition,multiplication, division, and remainder using a common datapath.

  17. A model-based gain scheduling approach for controlling the common-rail system for GDI engines

    Science.gov (United States)

    di Gaeta, Alessandro; Montanaro, Umberto; Fiengo, Giovanni; Palladino, Angelo; Giglio, Veniero

    2012-04-01

    The progressive reduction in vehicle emission requirements have forced the automotive industry to invest in research for developing alternative and more efficient control strategies. All control features and resources are permanently active in an electronic control unit (ECU), ensuring the best performance with respect to emissions, fuel economy, driveability and diagnostics, independently from engine working point. In this article, a considerable step forward has been achieved by the common-rail technology which has made possible to vary the injection pressure over the entire engine speed range. As a consequence, the injection of a fixed amount of fuel is more precise and multiple injections in a combustion cycle can be made. In this article, a novel gain scheduling pressure controller for gasoline direct injection (GDI) engine is designed to stabilise the mean fuel pressure into the rail and to track demanded pressure trajectories. By exploiting a simple control-oriented model describing the mean pressure dynamics in the rail, the control structure turns to be simple enough to be effectively implemented in commercial ECUs. Experimental results in a wide range of operating points confirm the effectiveness of the proposed control method to tame efficiently the mean value pressure dynamics of the plant showing a good accuracy and robustness with respect to unavoidable parameters uncertainties, unmodelled dynamics, and hidden coupling terms.

  18. South Africa’s freight rail reform: A demand-driven perspective

    Directory of Open Access Journals (Sweden)

    Jan H. Havenga

    2014-11-01

    Full Text Available During the 20th century, freight transport in South Africa was employed to attain politicoeconomic ideals, resulting in the overprotection of rail and overregulation of road transport. Increasing industry pressure, combined with the international deregulation trend, led to deregulation in 1988. Myopia resulted in a rail investment hiatus and exponential growth in high-value, long-distance road transport, causing excessive logistics and externality costs for the country. The aim of this study was to propose a freight rail reform agenda based on, (1 lessons from past freight transport policy efforts and (2 the results of freight transport market segmentation driven by models developed over the past two decades. For the study, freight flows were modelled by disaggregating the national input–output model into 372 origin–destination pairs and 71 commodity groups, followed by distance decay gravitymodelling. Logistics costs were calculated by relating commodity-level freight flows to the costs of fulfilling associated logistical functions. The standard management approach of founding strategy development on market-driven segmentation provides a neutral input to steer rail reform discussions in South Africa. Market segmentation points to a dualistic rail reform agenda, enabling both a profit-driven core and a development-driven branch line network. Freight flow insights are steering the policy reform debate towards long-term freight strategy development and optimal freight logistics network design.

  19. A Measuring Method About the Bullet Velocity in Electromagnetic Rail Gun

    Directory of Open Access Journals (Sweden)

    Jianming LIU

    2014-02-01

    Full Text Available The operating principle of electromagnetic rail gun by store capacitor was analyzed. A simulation model about the bullet velocity in the electromagnetic rail gun was built. The results of computer simulation experiment showed the relationships between the bullet velocity and the capacitor charging voltage and the pellet mass. By ten coil targets, a new kind of measuring method for the bullet velocity in electromagnetic rail gun was presented. The results of the actual experiment were analyzed. The improving method for measuring bullet velocity was put forward.

  20. System diagnosis using finite memory observers: Common Rail application; Diagnostic des systemes a l'aide d'observateurs a memoire finie: application au Common Rail

    Energy Technology Data Exchange (ETDEWEB)

    Graton, G.

    2005-12-15

    The aim of this work was to propose a fault detection method on the high pressure direct injection system (called Common Rail system) set up on Diesel vehicles. The importance of the fault detection procedure implementation was highlighted thanks to the description of the stakes (lowers consumption, reduction in the pollutant emissions and sound, increase of performances) and constraints dependent on Common Rail (high pressure, high frequency, gas oil lubrication, high precision machining, standards EURO respect,...) but also through a listing of failures which can occur on Common Rail. A synthesis on the different diagnosis methods of systems contributed to select a fault detection method with expected performances (detection of fault beginning, detection speed, isolation and characterization of detected fault and minimizing false alarm and bad detections). After a detailed study (properties, sequential formulations and sensitivity study) of the selected detection method (finite memory observers) and a modeling of the Common Rail various bodies behavior, the algorithm of detection was tested on three different models of the system Common Rail. Moreover, the comparison between the finite memory observer and a Luenberger observer and a Kalman filter allow to appreciate the residual robustness degree. Obtained results allow to conclude on good detection of actuator and sensor faults. (author)

  1. 75 FR 13345 - Pricing for Certain United States Mint Products

    Science.gov (United States)

    2010-03-19

    ... DEPARTMENT OF THE TREASURY United States Mint Pricing for Certain United States Mint Products AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of First Spouse Bronze Medals and 2010 First Spouse Bronze Medal Series: Four...

  2. Investigating the lubricity and electrical insulation caused by sanding in dry wheel–rail contacts

    NARCIS (Netherlands)

    Arias-Cuevas, O.; Li, Z.; Lewis, R.

    2009-01-01

    The adhesion (or available friction) in the wheel–rail contact is the most important parameter for the braking and traction operation of rail vehicles. Since the beginning of railway transportation, sanding from the locomotive has been a common practice to enhance the wheel–rail adhesion. In recent

  3. 22 CFR 22.3 - Remittances in the United States.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Remittances in the United States. 22.3 Section...-DEPARTMENT OF STATE AND FOREIGN SERVICE § 22.3 Remittances in the United States. (a) Type of remittance. Remittances shall be in the form of: (1) Check or bank draft drawn on a bank in the United States; (2) money...

  4. Structural analysis of the ITER Divertor toroidal rails

    Energy Technology Data Exchange (ETDEWEB)

    Viganò, F., E-mail: Fabio.Vigano@LTCalcoli.it [L.T. Calcoli SaS, Piazza Prinetti 26/B, 23807 Merate (Italy); Escourbiac, F.; Gicquel, S.; Komarov, V. [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul lez Durance (France); Lucca, F. [L.T. Calcoli SaS, Piazza Prinetti 26/B, 23807 Merate (Italy); Merola, M. [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul lez Durance (France); Ngnitewe, R. [L.T. Calcoli SaS, Piazza Prinetti 26/B, 23807 Merate (Italy)

    2013-10-15

    The Divertor is one of the most technically challenging components of the ITER machine, which has the main function of extracting the power conducted in the scrape-off layer while maintaining the plasma purity. There are 54 Divertor cassettes installed in the vacuum vessel (VV). Each cassette body (CB) is fastened on the inner and outer concentric Divertor toroidal rails. The comprehensive assessment (in accordance with the Structural Design Criteria for ITER In-vessel Components: ITER SDC-IC) of the Divertor toroidal rails has been performed during design activity based on performing of thermal and stress analyses at operating conditions of neutron stage of ITER operation. This paper outlines the engineering aspects of the ITER Divertor toroidal rails and focuses on some critical regions of the present design highlighted by the performed structural assessment. The structural assessment has been performed with help of using Finite Element (FE) Abaqus code and based on criteria given by ITER SDC-IC.

  5. A REVIEW OF HIGH-SPEED RAIL PLAN IN JAVA ISLAND: A COMPARISON WITH EXISTING MODES OF TRANSPORT

    Directory of Open Access Journals (Sweden)

    Eko Hartono

    2013-05-01

    It can be concluded that journey time and fare of the high-speed rail is very competitive to the air transport in Jakarta-Surabaya corridor. The journey time to travel from Jakarta to Surabaya is 4 hours and 19 minutes by high-speed train and 4 hours and 40 minutes by air. Based on the benchmarking analysis, the suitable fare for the high-speed rail should be 70% of the air transport. This study predicted that 61% of air passenger, 18% of conventional rail passenger and 12% of bus passenger will switch to the high-speed rail service in 2020. In total, the high-speed rail will have 24% of market share for the passenger transport and becomes the second largest market share after road transport (52%. The conventional rail and air transport have 14% and 9% of total market share to travel from Jakarta to Surabaya and vice versa. The high-speed rail development reduces carbon emissions caused by transportation systems in Java Island. It has been calculated that there are 2.542 million tonnages of CO2 per annum without introducing high-speed rail, however, the CO2 emissions decrease to 1.694 million tonnages per annum if the high-speed rail is developed in Java Island. Generalized cost of the high-speed rail is higher than road and conventional rail. However, it is lower than air transport. Keywords: Java high-speed rail, HSR Comparison, modal share, journey time

  6. Analysis of railroad energy efficiency in the United States.

    Science.gov (United States)

    2013-05-01

    The purpose of this study is to provide information about railroad fuel efficiency that may be useful in evaluating transportation energy policies and assessing the sustainability of potential projects. The specific objectives are to (1) develop rail...

  7. Shock and vibration environments encountered during normal rail transportation of heavy cargo

    International Nuclear Information System (INIS)

    Magnuson, C.F.

    1982-08-01

    This study was conducted to obtain vibration and superimposed shock data during normal rail shipment of heavy cargo. The data were obtained during a regularly scheduled rail shipment of a 45-tonne (50-ton) cargo which consisted of an empty spent-fuel container, its supporting structure, and associated hoisting devices. The shipment was made over rail lines which are operated by the Atchison, Topeka, and Santa Fe Railway Company between Denver, Colorado and Albuquerque, New Mexico. The instrumented rail car was equipped with 0.38-m (15-in.) hydraulic end-of-car coupling devices. The 99 percentile levels of vibration acceleration amplitudes and single degree-of-freedom superimposed shock response spectra for the longitudinal, transverse, and vertical axes are presented

  8. 49 CFR 210.29 - Operation standards (moving locomotives and rail cars).

    Science.gov (United States)

    2010-10-01

    ... cars). 210.29 Section 210.29 Transportation Other Regulations Relating to Transportation (Continued... REGULATIONS Inspection and Testing § 210.29 Operation standards (moving locomotives and rail cars). The operation standards for the noise emission levels of moving locomotives, rail cars, or consists of...

  9. Ballistic Rail Gun Soft Recovery Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Ballistic Rail Gun Soft Recovery Facility accommodates a 155mm Howitzer, fired horizontally into a 104-foot long water trough to slow the projectile and recover...

  10. Rail Baltica tuleb : reisiterminalide arhitektuurivõistlused Tallinnas ja Pärnus = Rail Baltic is coming : Arhitecture competitions for passenger rail terminals in Tallinn and Pärnu / Andres Lindemann

    Index Scriptorium Estoniae

    Lindemann, Andres

    2015-01-01

    2014.a. lõpus lõppesid arhitektuurivõistlused Tallinnas Ülemistele ja Pärnus Papiniidu piirkonda plaanitavatele Rail Baltica reisiterminalidele. Artiklis on antud põgus ülevaade võitnud töödest

  11. The United Kingdom: Issues for the United States

    National Research Council Canada - National Science Library

    Archick, Kristin

    2007-01-01

    ...; and more recently, from the UK's strong support in countering terrorism and confronting Iraq. The United States and Britain also share a mutually beneficial trade and economic relationship, and are each other's biggest foreign direct investors...

  12. Radiation therapy facilities in the United States

    International Nuclear Information System (INIS)

    Ballas, Leslie K.; Elkin, Elena B.; Schrag, Deborah; Minsky, Bruce D.; Bach, Peter B.

    2006-01-01

    Purpose: About half of all cancer patients in the United States receive radiation therapy as a part of their cancer treatment. Little is known, however, about the facilities that currently deliver external beam radiation. Our goal was to construct a comprehensive database of all radiation therapy facilities in the United States that can be used for future health services research in radiation oncology. Methods and Materials: From each state's health department we obtained a list of all facilities that have a linear accelerator or provide radiation therapy. We merged these state lists with information from the American Hospital Association (AHA), as well as 2 organizations that audit the accuracy of radiation machines: the Radiologic Physics Center (RPC) and Radiation Dosimetry Services (RDS). The comprehensive database included all unique facilities listed in 1 or more of the 4 sources. Results: We identified 2,246 radiation therapy facilities operating in the United States as of 2004-2005. Of these, 448 (20%) facilities were identified through state health department records alone and were not listed in any other data source. Conclusions: Determining the location of the 2,246 radiation facilities in the United States is a first step in providing important information to radiation oncologists and policymakers concerned with access to radiation therapy services, the distribution of health care resources, and the quality of cancer care

  13. Research of the Resistance of Contact Welding Joint of R65 Type Rail

    Directory of Open Access Journals (Sweden)

    Kęstutis Dauskurdis

    2015-03-01

    Full Text Available In the article the R65 type rail joints that were welded by resistance welding are analysed. Survey methodology of the research consists of the following parts: visual inspection of welded joint, ultrasonic rail inspection, hardness test of upper part of the rail, fusion area research, the measurement hardness test of heat-softened area, the measurement microhardness test, microstructure research of the welded joint, impact strength experiments, chemical analysis of welded joint, wheel-rail interaction research using the finite element method (FEM. The results of the research are analysed and the quality of weld is evaluated. The conclusion is based on the results of this research.

  14. 75 FR 13345 - Pricing for Certain 2010 United States Mint Products

    Science.gov (United States)

    2010-03-19

    ... DEPARTMENT OF THE TREASURY United States Mint Pricing for Certain 2010 United States Mint Products AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of the 2010 United States Mint Presidential $1 Coin and First Spouse Medal...

  15. 19 CFR 123.91 - Electronic information for rail cargo required in advance of arrival.

    Science.gov (United States)

    2010-04-01

    ... identification number will be a unique number to be assigned by CBP upon the implementation of the Automated... implementation of the Automated Commercial Environment); (8) The place where the rail carrier takes possession of... being shipped by rail; (10) Container numbers (for containerized shipments) or the rail car numbers; and...

  16. Rail Baltica waiting at the station

    Index Scriptorium Estoniae

    2010-01-01

    Majandus- ja kommunikatsiooniministeeriumi transpordi asekantsleri Eero Pärgmäe sõnul on Eesti 2012. aastal valmis Tallinn-Riia rongiliini avamiseks. Tallinn-Berliini rongiliinist. Siim Kallas lubas aidata edendada Rail Baltica projekti

  17. Intergenerational educational mobility in Denmark and the United States

    DEFF Research Database (Denmark)

    Andrade, Stefan Bastholm; Thomsen, Jens-Peter

    2018-01-01

    An overall finding in comparative mobility studies is that intergenerational mobility is greater in Scandinavia than in liberal welfare-state countries like the United States and United Kingdom. However, in a recent study, Landersø and Heckman (L & H) (2017) argue that intergenerational educational...... mobility in Denmark and the United States is remarkably similar. L & H’s findings run contrary to widespread beliefs and have been echoed in academia and mass media on both sides of the Atlantic Ocean. In this article, we reanalyze educational mobility in Denmark and the United States using the same data...... sources as L & H. We apply several different methodological approaches from economics and sociology, and we consistently find that educational mobility is higher in Denmark than in the United States....

  18. Toll Facilities in the United States

    Data.gov (United States)

    Department of Transportation — Biennial report containing selected information on toll facilities in the United States that has been provided to FHWA by the States and/or various toll authorities...

  19. Taanlased pidasid Pärnut läbivat Rail Balticat kalleimaks / Raavo Raadik

    Index Scriptorium Estoniae

    Raadik, Raavo

    2007-01-01

    Taani konsultatsioonifirma COWI tutvustas uuringut, milles analüüsiti Balti riike Euroopaga ühendava raudtee Rail Baltica majanduslikku tasuvust ning selle loomiseks vajalike investeeringute mahtu. Kaart: Rail Baltica võimalik teekond Eestis

  20. State nuclear initiatives in the United States

    International Nuclear Information System (INIS)

    Strauss, P.L.; Stoiber, C.R.

    1977-01-01

    The paper deals with State nuclear initiatives regarding the role of nuclear power in the energy future of the United States. The question of whether and under what circumstances nuclear facilities should be used to generate electricity was put to the popular vote in several States in 1976. Some general principles of Federal-State relations are discussed with specific reference to nuclear regulations. The initiative mechanism itself is described as well as its legal form and background. The parallel developments in the State and Federal legislative consideration of nuclear issues is reviewed and the suggested reasons for the defeat of the proposals in the seven States concerned are discussed. Finally, the author draws some conclusions on the effects of the 1976 initiatives on future decision-making in the US on energy policy in general and nuclear power in particular. (NEA) [fr

  1. Rail security : some actions taken to enhance passenger and freight rail security, but significant challenges remain : testimony before the Committee on Commerce, Science, and Transportation, U.S. Senate

    Science.gov (United States)

    2004-03-23

    Passenger and freight rail services are important links in the nation's transportation system. Terrorist attacks on passenger and/or freight rail services have the potential to cause widespread injury, loss of life, and economic disruption. The recen...

  2. Appraisal on Rail Transit Development: A Review on Train Services and Safety

    Science.gov (United States)

    Nordin, Noor Hafiza binti; Masirin, Mohd Idrus Haji Mohd; Ghazali, Mohd Imran bin; Azis, Mohd Isom bin

    2017-08-01

    The ever increasing problems faced by population around the world have made demands that transportation need to be improved as an effective and efficient communication means. It is considered as a necessity especially when rapid development and economic growth of a country is the agenda. Among the transportation modes being focused as critical facilities are the bus system, rail system, road network, shipping system and air transportation system. Rail transport is a means of conveyance of passengers and goods by way of wheeled vehicles running on rail tracks. In Malaysia, the railway network has evolved tremendously since its inception in the early 19th century. It has grown proportionally with the national development. Railway network does not only mean for rural transportation, but it also considered as a solution to urban congestion challenges. Currently, urban rail transit is the most popular means of urban transportation system especially as big cities such as Kuala Lumpur. This paper presents the definition of rail transportation system and its role in urban or sub-urban operation. It also describes the brief history of world railway transportation including a discussion on Malaysian rail history perspective. As policy and standard are important in operating a railway system, this paper also illustrates and discusses some elements which have an impact on the effectiveness and efficiency of train operation. Towards the end, this paper also shares the importance of railway safety based on real case studies around the world. Thus, it is hoped that this paper will enable the public to understand the rail transit development and appreciate its existence as a public transportation system.

  3. Reduction of Sleep Deprivation and Fatigue in Mass Transit Rail Operators.

    Science.gov (United States)

    Haynes, Ajeenah L

    2017-08-01

    Sleep and work schedules differ considerably between rail workers and the broader U.S. workforce. Due to extended work hours and night shift schedules, train and engine service workers who operate passenger trains or move freight are most vulnerable to fatigue. This article addresses the need for comprehensive fatigue risk management systems (FRMS) for rail operators. Using a transactional ergonomic perspective, FRMS are discussed with a focus on fatigue education and administrative controls to reduce feelings of tiredness, low motivation, poor concentration, and low physical activity among mass transit rail operators. Recommendations for intervention implementation and evaluation are provided.

  4. An analysis of commercial railroad congestion and its resultant impact on fort-to-port transportation efforts

    OpenAIRE

    Hillis, Shaun A.

    1999-01-01

    The United States Army is heavily-dependent upon commercial railroad transportation assets for the movement of cargo and equipment from Continental United States (CONUS) installations to Seaports of Embarkation during unit mobilizations. With the withdrawal of forces from overseas installations, this dependence upon commercial rail assets nas grown dramatically in the past few years. Due to a series of consolidations and mergers, the CONUS rail infrastructure has reached full capacity and is ...

  5. 27 CFR 479.89 - Transfers to the United States.

    Science.gov (United States)

    2010-04-01

    ... Transfers to the United States. A firearm may be transferred to the United States or any department... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Transfers to the United States. 479.89 Section 479.89 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO...

  6. idRHa+ProMod - Rail Hardening Control System

    International Nuclear Information System (INIS)

    Ferro, L

    2016-01-01

    idRHa+ProMod is the process control system developed by Primetals Technologies to foresee the thermo-mechanical evolution and micro-structural composition of rail steels subjected to slack quenching into idRHa+ Rail Hardening equipments in a simulation environment. This tool can be used both off-line or in-line, giving the user the chance to test and study the best cooling strategies or letting the automatic control system free to adjust the proper cooling recipe. Optimization criteria have been tailored in order to determine the best cooling conditions according to the metallurgical requirements imposed by the main rail standards and also taking into account the elastoplastic bending phenomena occurring during all stages of the head hardening process. The computational core of idRHa+ProMod is a thermal finite element procedure coupled with special algorithms developed to work out the main thermo-physical properties of steel, to predict the non-isothermal austenite decomposition into all the relevant phases and subsequently to evaluate the amount of latent heat of transformation released, the compound thermal expansion coefficient and the amount of plastic deformation in the material. Air mist and air blades boundary conditions have been carefully investigated by means of pilot plant tests aimed to study the jet impingement on rail surfaces and the cooling efficiency at all working conditions. Heat transfer coefficients have been further checked and adjusted directly on field during commissioning. idRHa+ is a trademark of Primetals Technologies Italy Srl (paper)

  7. idRHa+ProMod - Rail Hardening Control System

    Science.gov (United States)

    Ferro, L.

    2016-03-01

    idRHa+ProMod is the process control system developed by Primetals Technologies to foresee the thermo-mechanical evolution and micro-structural composition of rail steels subjected to slack quenching into idRHa+ Rail Hardening equipments in a simulation environment. This tool can be used both off-line or in-line, giving the user the chance to test and study the best cooling strategies or letting the automatic control system free to adjust the proper cooling recipe. Optimization criteria have been tailored in order to determine the best cooling conditions according to the metallurgical requirements imposed by the main rail standards and also taking into account the elastoplastic bending phenomena occurring during all stages of the head hardening process. The computational core of idRHa+ProMod is a thermal finite element procedure coupled with special algorithms developed to work out the main thermo-physical properties of steel, to predict the non-isothermal austenite decomposition into all the relevant phases and subsequently to evaluate the amount of latent heat of transformation released, the compound thermal expansion coefficient and the amount of plastic deformation in the material. Air mist and air blades boundary conditions have been carefully investigated by means of pilot plant tests aimed to study the jet impingement on rail surfaces and the cooling efficiency at all working conditions. Heat transfer coefficients have been further checked and adjusted directly on field during commissioning. idRHa+ is a trademark of Primetals Technologies Italy Srl

  8. HRTPO strategic campaign and vision plan for passenger rail : phase 1 overview.

    Science.gov (United States)

    2010-03-17

    SUBJECT: : TEMS (Transportation Economics & Management Systems, Inc.), the consultant specializing in : passenger rail planning, was secured by the HRTPO and its partner DRPT to evaluate the potential : passenger rail service alternative defined by t...

  9. 32 CFR 516.54 - Witnesses for the United States.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Witnesses for the United States. 516.54 Section..., Travel, and Expenses of Witnesses § 516.54 Witnesses for the United States. (a) Status of witness. A military member authorized to appear as a witness for the United States, including those authorized to...

  10. 32 CFR 150.21 - Appeals by the United States.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Appeals by the United States. 150.21 Section 150... the United States. (a) Restricted filing. Only a representative of the government designated by the Judge Advocate General of the respective service may file an appeal by the United States under Article...

  11. United States housing, first quarter 2013

    Science.gov (United States)

    Delton Alderman

    2014-01-01

    Provides current and historical information on housing market in the United States. Information includes trends for housing permits and starts, housing under construction, and housing completions for single and multifamily units, and sales and construction. This report will be updated regularly.

  12. Review on Malaysian Rail Transit Operation and Management System: Issues and Solution in Integration

    Science.gov (United States)

    Masirin, Mohd Idrus Mohd; Salin, Aminah Mohd; Zainorabidin, Adnan; Martin, David; Samsuddin, Norshakina

    2017-08-01

    In any context, operation and management of transportation systems are key issues which may affect both life quality and economic development. In large urban agglomerations, an efficient public transportation system may help abate the negative externalities of private car use such as congestion, air and noise pollution, accident and fuel consumption, without excessively penalizing user travel times or zone accessibility. Thus, this study is conducted to appraise the Malaysian rural rail transit operation and management system, which are considered important as there are many issues and solution in integration of the services that need to be tackled more conscientiously. The purpose of this paper is to describe some of the most important issues on integration of services and rail transit system in Malaysian and how to solve or reduce these problems and conflicts. In this paper, it consists of the historical development of rail transit construction in Malaysia. This paper also attempts to identify the important issues related to rail transit services and integration in Malaysian rural rail operation and management system. Comparison is also conducted with other countries such as UK, France, and Japan. Finally, a critical analysis is presented in this paper by looking at the possible application for future Malaysian rail transit operation system and management, especially focusing on enhancing the quality of Malaysian rural rail transit. In conclusion, this paper is expected to successfully review and appraise the existing Malaysian rural rail transit operation and management system pertaining to issues & solution in integration. It is also hoped that reformation or transformation of present service delivery quality of the rail transit operation and management will enable Malaysia to succeed in transforming Malaysian transportation system to greater heights.

  13. Rail Brake System Using a Linear Induction Motor for Dynamic Braking

    Science.gov (United States)

    Sakamoto, Yasuaki; Kashiwagi, Takayuki; Tanaka, Minoru; Hasegawa, Hitoshi; Sasakawa, Takashi; Fujii, Nobuo

    One type of braking system for railway vehicles is the eddy current brake. Because this type of brake has the problem of rail heating, it has not been used for practical applications in Japan. Therefore, we proposed the use of a linear induction motor (LIM) for dynamic braking in eddy current brake systems. The LIM reduces rail heating and uses an inverter for self excitation. In this paper, we estimated the performance of an LIM from experimental results of a fundamental test machine and confirmed that the LIM generates an approximately constant braking force under constant current excitation. At relatively low frequencies, this braking force remains unaffected by frequency changes. The reduction ratio of rail heating is also approximately proportional to the frequency. We also confirmed that dynamic braking resulting in no electrical output can be used for drive control of the LIM. These characteristics are convenient for the realization of the LIM rail brake system.

  14. Study on improving rail energy efficiency (E2) : best practices and strategies

    Science.gov (United States)

    2015-03-23

    A recent Volpe Center report [1] for the Federal Railroad Administrations (FRA) Rail Energy, Environment, and Engine (E3) Technology research and development program reviewed rail industry best practices (BPs) and strategies for improving energy e...

  15. TRAIL: a tokamak rail gun limiter

    International Nuclear Information System (INIS)

    Yu, W.S.; Powell, J.R.; Usher, J.L.

    1980-01-01

    An attractive new limiter concept is investigated. The TRAIL (Tokamak Rail Gun Limiter) system impacts a stream of moderate velocity pellets (100 to 200 m/sec through the plasma edge region to absorb energy and define the plasma boundary. The pellets are recycled after cooling, to the injector of an E-M mass accelerator. Heat fluxes of approx. 30,000 W/cm 2 can be readily accommodated by the pellets, with very low recirculating power requirements (approx. 0.1%) for the accelerator. The mass accelerator velocity requirements are well within the present state of the art (several Km/sec). Accelerators injecting pellets at approx. 1 Km/sec can be used to control local plasma temperature and current profiles and to act as energy absorbers to shut down the plasma without damage to the first wall if a plasma disruption occurs

  16. Neutron measurement of residual stresses in a used railway rail

    International Nuclear Information System (INIS)

    Webster, P.J.; Low, K.S.; Mills, G.; Webster, G.A.

    1990-01-01

    The high resolution neutron diffraction technique has been applied to determine, non-destructively, the residual stress distribution developed in the head of a railway rail after normal service. Measurements were made, using the neutron strain scanner at the Institute Laue Langevin, Grenoble, on a transverse slice of rail 12mm thick taken from a section of straight track. The rail head was scanned in the three principal orientations in a series of parallel traverses sufficiently close to enable a two-dimensional matrix of data to be accumulated and vertical, transverse and longitudinal residual stress contours to be drawn. The results demonstrate the effectiveness and unique characteristics of the neutron technique to determine nondestructively and continuously the residual stresses inside engineering components

  17. Planning, Investment, Construction and Operation of Rail Transit in Beijing

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    In Beijing, the rail transit firstly came into existence in the mid 1960s and was officially put into operation for civil use in the early 1980s. It has entered a period of rapid development since 2001, with thanks to the coming of the Olympic Games in 2008, and has been playing a more and more important role in the passenger transport of Beijing since then on, as a key part of the public transportation. Based on a resume on the evolution of rail transit development in Beijing, this paper analyzes the mechanism of policy-making, the mode of investment and financing, the procedure of construction, and the management of operation of rail transit, all of which ensure its rapid development and effective performance.

  18. 49 CFR 172.820 - Additional planning requirements for transportation by rail.

    Science.gov (United States)

    2010-10-01

    ... identify a point of contact (including the name, title, phone number and e-mail address) on routing issues... Additional planning requirements for transportation by rail. (a) General. Each rail carrier transporting in... materials transported (instead of only highway route controlled quantities of Class 7 materials) and for all...

  19. Passenger Rail Car Egress -- TRB Workshop

    Science.gov (United States)

    2011-11-01

    The Federal Railroad Administrations (FRA) Office of Railroad Policy and Development is exploring how to enhance regulations that address the safe, timely, and effective emergency evacuation of occupants from passenger rail vehicles in various eme...

  20. Arsenic in Ground Water of the United States

    Science.gov (United States)

    ... Team More Information Arsenic in groundwater of the United States Arsenic in groundwater is largely the result of ... Gronberg (2011) for updated arsenic map. Featured publications United States Effects of human-induced alteration of groundwater flow ...

  1. Long Term Land Use Effects of New Rail Investment: Lessons from San Diego

    Directory of Open Access Journals (Sweden)

    David A. King

    2018-01-01

    Full Text Available In recent decades, U.S. cities have invested in rail transit for reasons beyond supplying alternatives to driving. Increasingly, rail investments are specifically promoted to reshape the built environment for property-led economic development. In these cases, new investment in rail transit is claimed to facilitate particular types of land use changes, mostly in the form of dense multi-family residential and mixed-use developments. Although rail’s effects on land use are widely claimed, scholarly evaluations offer mixed results. This paper examines two potential reasons for these mixed results. First, as most empirical examinations tend to be conducted shortly after new transit investment opens analysis is often criticized on the basis that short time frames may not allow land use changes to materialize. The second is that rail investment often includes changes to local zoning and land use regulations, creating opportunities for types of development that were previously outlawed. This paper evaluates these two critiques through an analysis of long-term land use effects associated with new rail transit service in San Diego, California. The results suggest that even after three decades of development cycles, rail transit has not led to consistent regulatory patterns of increased density or new mixed-use development.

  2. Participatory Sustainability Approach to Value Capture-Based Urban Rail Financing in India through Deliberated Stakeholder Engagement

    Directory of Open Access Journals (Sweden)

    Satya Sai Kumar Jillella

    2015-06-01

    Full Text Available Increasingly, cities around the world are seeking innovative financial mechanisms to build rail transit projects. Land value capture (VC is a financing mechanism to fund urban rail transit. Often VC mechanisms are viewed only as a financing tool applied in relation to increased land values from the administration and legislation perspectives, without actively involving the community in the process. The lack of such participation has resulted in the under collection of the true value established. The transit beneficiary community and city tax payers are especially important stakeholders in this process as their willingness to participate is really critical to the overall VC success and transport outcome. This paper introduces a participatory sustainability approach to enable a more deliberated stakeholder engagement intervention across the VC life cycle. A four-step “Participatory Strategic Value Capture (PSVC” framework is proposed offering step-by-step guidance toward facilitating a meaningful stakeholder dialogue, deliberation, and collaboration around the stated engagement interests. The PSVC framework, applied to the proposed Bangalore sub-urban rail project in India, has demonstrated the importance of stakeholder engagement using deliberated participatory approaches from a win-win perspective.

  3. Does mercury contamination reduce body condition of endangered California clapper rails?

    International Nuclear Information System (INIS)

    Ackerman, Joshua T.; Overton, Cory T.; Casazza, Michael L.; Takekawa, John Y.; Eagles-Smith, Collin A.; Keister, Robin A.; Herzog, Mark P.

    2012-01-01

    We examined mercury exposure in 133 endangered California clapper rails (Rallus longirostris obsoletus) within tidal marsh habitats of San Francisco Bay, California from 2006 to 2010. Mean total mercury concentrations were 0.56 μg/g ww in blood (range: 0.15–1.43), 9.87 μg/g fw in head feathers (3.37–22.0), 9.04 μg/g fw in breast feathers (3.68–20.2), and 0.57 μg/g fww in abandoned eggs (0.15–2.70). We recaptured 21 clapper rails and most had low within-individual variation in mercury. Differences in mercury concentrations were largely attributed to tidal marsh site, with some evidence for year and quadratic date effects. Mercury concentrations in feathers were correlated with blood, and slopes differed between sexes (R 2 = 0.58–0.76). Body condition was negatively related to mercury concentrations. Model averaged estimates indicated a potential decrease in body mass of 20–22 g (5–7%) over the observed range of mercury concentrations. Our results indicate the potential for detrimental effects of mercury contamination on endangered California clapper rails in tidal marsh habitats. - Highlights: ► We examined mercury in endangered California clapper rails within tidal marshes. ► Differences in mercury concentrations were largely attributed to tidal marsh site. ► Mercury concentrations in blood, feathers, and eggs were considered elevated. ► Body condition was negatively related to mercury concentrations. ► Results indicate detrimental effects of mercury on endangered clapper rails. - Mercury contamination in endangered California clapper rails was influenced by tidal marsh site and increased mercury resulted in reduced bird body condition.

  4. Inferring ecological relationships from occupancy patterns for California Black Rails in the Sierra Nevada foothills

    Science.gov (United States)

    Richmond, Orien Manu Wright

    The secretive California Black Rail (Laterallus jamaicensis coturniculus ) has a disjunct and poorly understood distribution. After a new population was discovered in Yuba County in 1994, we conducted call playback surveys from 1994--2006 in the Sierra foothills and Sacramento Valley region to determine the distribution and residency of Black Rails, estimate densities, and obtain estimates of site occupancy and detection probability. We found Black Rails at 164 small, widely scattered marshes distributed along the lower western slopes of the Sierra Nevada foothills, from just northeast of Chico (Butte County) to Rocklin (Placer County). Marshes were surrounded by a matrix of unsuitable habitat, creating a patchy or metapopulation structure. We observed Black Rails nesting and present evidence that they are year-round residents. Assuming perfect detectability we estimated a lower-bound mean Black Rail density of 1.78 rails ha-1, and assuming a detection probability of 0.5 we estimated a mean density of 3.55 rails ha-1. We test if the presence of the larger Virginia Rail (Laterallus limicola) affects probabilities of detection or occupancy of the smaller California Black Rail in small freshwater marshes that range in size from 0.013-13.99 ha. We hypothesized that Black Rail occupancy should be lower in small marshes when Virginia Rails are present than when they are absent, because resources are presumably more limited and interference competition should increase. We found that Black Rail detection probability was unaffected by the detection of Virginia Rails, while, surprisingly, Black and Virginia Rail occupancy were positively associated even in small marshes. The average probability of Black Rail occupancy was higher when Virginia Rails were present (0.74 +/- 0.053) than when they were absent (0.36 +/- 0.069), and for both species occupancy increased with marsh size. We assessed the impact of winter (November-May) cattle grazing on occupancy of California Black

  5. Enrichment situation outside the United States

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Different enrichment technologies are briefly characterized which include gaseous diffusion, which is presently the production mainstay of the United States and France; the gaseous centrifuge which is the production plant for Urenco and the technology for future United States enrichment expansion; the aero-dynamic processes which include the jet nozzle (also known as the Becker process) and the fixed-wall centrifuge (also known as the Helikon process); chemical processes; laser isotope separation processes (also referred to in the literature as LIS); and plasma technology

  6. Simultaneous in-bore rail and insulator spectra from a railgun plasma armature

    International Nuclear Information System (INIS)

    Keefer, D.; Sedghinasah, A.; Crawford, R.

    1991-01-01

    This paper reports on absolute spectral radiance measurements obtained simultaneously at the rail and insulator surface of the UTSI 1 cm square-bore railgun. The emission spectra were obtained through the use of quartz optical fibers which penetrated both the rail and the insulator walls. The spectral characteristics of the rail and insulator emission are quite similar but differ significantly in magnitude. A detailed plasma radiation model was used to analyze these spectra. In order to obtain reasonable agreement between the model predictions and the experimental spectra, it was necessary to assume that these existed a broadband absorbing layer at the insulator surface. This result suggests a new physical model of the plasma armature in which insulator ablation leads to significant 3-dimensional flow and affects the shape of the current emission pattern on the rail surfaces

  7. Radiological mapping of Mumbai-Chatrapur (Odisha) rail route

    International Nuclear Information System (INIS)

    Patra, R.P.; Patil, S.S.; Murali, S.; Singh, Rajvir; Pradeepkumar, K.S.

    2014-01-01

    The radiation mapping at various stations along Mumbai-Chatrapur rail route was carried out using GM, Plastic scintillator and NaI(Tl) based detectors. It has been observed that the average radiation level during the entire Mumbai-Chatrapur rail route was 63.8±6.l nSv h -1 and the maximum dose rate was 94.5±12.7 nSv h -1 and 103.2±10.2 nSv h -1 near Secunderabad and Chatrapur station respectively. The elevated radiation level at few locations was mainly due to the presence of terrestrial radiation i.e. naturally occurring radioactive material (NORM) viz., Thorium ( 232 Th) and Potassium ( 40 K) present in the environment. The spectral analysis led to confirming the presence of 232 Th and 40 K at the places. The main aim of the work was to generate the country wide baseline radiological data along selected important rail routes that could be used for radiological impact assessment. The results reported in this work would be helpful to provide valuable/useful reference data during the impact assessment at different locations

  8. APPLICATION OF NFC TECHNOLOGY IN PASSENGER RAIL TRANSPORT

    Directory of Open Access Journals (Sweden)

    Henryk KOMSTA

    2016-09-01

    Full Text Available The article discusses the possibility of the application of the NFC technology as a system of selling tickets in passenger rail transport. The NFC (Near Field Communication technology is a wireless and contactless technology of transmission of radio data over short distances (max. 5 cm. This technology is very similar to the RFID (Radio Frequency Identification technology. It is assumed that this technology will spread rapidly and that already in 2015 around 85% of the payments in the EU will be made via mobile phones. This paper presents a research of passenger interest in this method of payment for tickets in the passenger rail transport in Slovakia. Further, an analysis of the applications of the NFC technology as a system of selling tickets in passenger rail transport, including the protection of data in mobile phones, the processes in case of losing a mobile phone and ensuring the communication between both parties was presented in the article. The last part of this analysis shows the possibility of purchasing tickets regardless of the carrier and the transport type.

  9. 78 FR 17996 - MCM Rail Services LLC-Petition for Retroactive Exemption-In Sparrows Point, Md.

    Science.gov (United States)

    2013-03-25

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35707] MCM Rail Services... regarding a petition for an operation exemption submitted by MCM Rail Services LLC (MCM) regarding 12 miles of rail line in Sparrows Point, Md. (the Line). DATES: MCM's supplemental information is due by April...

  10. Leading Causes of Death in Females United States

    Science.gov (United States)

    ... and Health Issues at Work Health Equity Leading Causes of Death in Females, United States Recommend on Facebook Tweet ... to current and previous listings for the leading causes of death in females in the United States. Please note ...

  11. 33 CFR 2.38 - Waters subject to the jurisdiction of the United States; waters over which the United States has...

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Waters subject to the jurisdiction of the United States; waters over which the United States has jurisdiction. 2.38 Section 2.38 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL JURISDICTION...

  12. Unites States and the oil of the Middle-East

    International Nuclear Information System (INIS)

    Noel, P.

    2005-08-01

    The author discusses different aspects of the United States intervention and behavior in the Middle-East petroleum management. The Iraq and Iran potentials are largely under used. The Saudi Arabia defines its own oil policy, but benefits of the Unites States military help. The United States intervention is in the domain of the security of flux on the world market. (A.L.B.)

  13. Evolving diesel common rail technology for future low emission standards

    Energy Technology Data Exchange (ETDEWEB)

    Schoeppe, D.; Bercher, P.; Guerrassi, N.; Spadafora, P. [Delphi Diesel Systems, Paris (France)

    2005-07-01

    The Diesel fuel injection equipment will remain a key element for Diesel engine technology evolution. Achieving emission targets at competitive prices has been and will continue to be a major technical challenge to the engine manufacturer. Delphi is continously developing its Common Rail System and its components for fulfill future stricter emission legislation while simultaneously improving performance on noise, fuel consumption and power output. The outstanding and unique injector concept combined with innovative control strategies has largely contributed to the improvement of exhaust emission and performance, consumption and NVH over the lifetime of Diesel vehicles. Recently, Euro 4 common rail applications have been introduced on several applications by adding further capability such as multiple injection, small-injected quantity control and improved atomization. This papers will describe the latest Common Rail System developments that Delphi will introduce into the market to comply with future legislative emission targets. Further, a novel common rail injector will be presented, that uses a revolutionary, direct acting operating principle, where the nozzle is directly operated by a piezo actuator, without the use of a servo-hydraulic flow circuit. The superior performance of this injector concept will be shown, especially with regard to it's near square rate injection shape, minimum quantity capability as well as multiple injection performance. The direct acting operating principle allows rapid opening and closing of the injector, without compromising pilot quantity capability. The emission benefit obtained by such opening and closing behavior will be shown. Finally, based on the findings discussed, the papers will conclude on key features of future common rail systems. (orig.)

  14. Environmental risk analysis of hazardous material rail transportation

    Energy Technology Data Exchange (ETDEWEB)

    Saat, Mohd Rapik, E-mail: mohdsaat@illinois.edu [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States); Werth, Charles J.; Schaeffer, David [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States); Yoon, Hongkyu [Sandia National Laboratories, Albuquerque, NM 87123 (United States); Barkan, Christopher P.L. [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States)

    2014-01-15

    Highlights: • Comprehensive, nationwide risk assessment of hazardous material rail transportation. • Application of a novel environmental (i.e. soil and groundwater) consequence model. • Cleanup cost and total shipment distance are the most significant risk factors. • Annual risk varies from $20,000 to $560,000 for different products. • Provides information on the risk cost associated with specific product shipments. -- Abstract: An important aspect of railroad environmental risk management involves tank car transportation of hazardous materials. This paper describes a quantitative, environmental risk analysis of rail transportation of a group of light, non-aqueous-phase liquid (LNAPL) chemicals commonly transported by rail in North America. The Hazardous Materials Transportation Environmental Consequence Model (HMTECM) was used in conjunction with a geographic information system (GIS) analysis of environmental characteristics to develop probabilistic estimates of exposure to different spill scenarios along the North American rail network. The risk analysis incorporated the estimated clean-up cost developed using the HMTECM, route-specific probability distributions of soil type and depth to groundwater, annual traffic volume, railcar accident rate, and tank car safety features, to estimate the nationwide annual risk of transporting each product. The annual risk per car-mile (car-km) and per ton-mile (ton-km) was also calculated to enable comparison between chemicals and to provide information on the risk cost associated with shipments of these products. The analysis and the methodology provide a quantitative approach that will enable more effective management of the environmental risk of transporting hazardous materials.

  15. Environmental risk analysis of hazardous material rail transportation

    International Nuclear Information System (INIS)

    Saat, Mohd Rapik; Werth, Charles J.; Schaeffer, David; Yoon, Hongkyu; Barkan, Christopher P.L.

    2014-01-01

    Highlights: • Comprehensive, nationwide risk assessment of hazardous material rail transportation. • Application of a novel environmental (i.e. soil and groundwater) consequence model. • Cleanup cost and total shipment distance are the most significant risk factors. • Annual risk varies from $20,000 to $560,000 for different products. • Provides information on the risk cost associated with specific product shipments. -- Abstract: An important aspect of railroad environmental risk management involves tank car transportation of hazardous materials. This paper describes a quantitative, environmental risk analysis of rail transportation of a group of light, non-aqueous-phase liquid (LNAPL) chemicals commonly transported by rail in North America. The Hazardous Materials Transportation Environmental Consequence Model (HMTECM) was used in conjunction with a geographic information system (GIS) analysis of environmental characteristics to develop probabilistic estimates of exposure to different spill scenarios along the North American rail network. The risk analysis incorporated the estimated clean-up cost developed using the HMTECM, route-specific probability distributions of soil type and depth to groundwater, annual traffic volume, railcar accident rate, and tank car safety features, to estimate the nationwide annual risk of transporting each product. The annual risk per car-mile (car-km) and per ton-mile (ton-km) was also calculated to enable comparison between chemicals and to provide information on the risk cost associated with shipments of these products. The analysis and the methodology provide a quantitative approach that will enable more effective management of the environmental risk of transporting hazardous materials

  16. SQUEEZING EFFECT OF RAIL LOADED BY SEMI-SLEEPERS HAVING L-SHAPED CROSS-SECTION

    Directory of Open Access Journals (Sweden)

    V. N. Sukhodoev

    2015-01-01

    Full Text Available The paper considers a problem on introduction of a conception and regularities of “squeezing effect of a rail loaded non centrally by semi-sleepers having L-shaped cross-section” exemplified by belt-type tramway. Its advantages are ensured by doubled non centrally loaded foundations these are semi-sleepers. Semi-sleeper of L-shape cross-section is a lever of L-shape form, transforming a vertical load into horizontal ones and foundation squeezing. Properties of two semi-sleepers being doubled, orientated to each other and non centrally loaded have been used in order to create a positive effect. A horizontal force creates squeezing and it is revealed as a component of a vertical load during displacements which functionally depend on foundation squeezing. These dependences demonstrate that strength and deformation properties of earth foundation of vertical direction are used for creation of horizontal properties of sleeper vertical shoulder.The paper studies mechanics pertaining to a squeezing effect of a rail loaded by semi-sleepers having L-shaped cross-section. It has been established that the rail squeezing effect results from squeezing process executed in two mutually perpendicular directions (reduction of cross-sectional area by load of a rail wheel with spacers if they are set inside of a sleeper-mechanism on an elastic foundation.Methodology for calculation of parameters on the rail reduction effect is considered as a tool for handling of applied problems on belt-type tramways. Results of the proposed rail reduction effect in problem statement for elastic conditions, with unchanged cross-sectional dimension of a rail line and introduction of correction ratio coefficients due to new initial load data have recommended for practical application as reliable values.The paper has revealed a proportional dependence of the rail reduction effect according to strength on the resultant value of reaction pressure, eccentricity difference of the

  17. The highway and railroad operating environments for hazardous shipments in the United States - safer in the '90s?

    International Nuclear Information System (INIS)

    Saricks, C.L.; Tompkins, M.M.

    2000-01-01

    This paper seeks to illuminate the status of transportation safety and risk for large-quantity shipments of spent commercial reactor fuel and mixed and hazardous wastes by examining road and rail accident and vehicular travel data from the mid-1990s. Of special interest are the effect of speed limit changes on controlled-access expressways (chiefly the Interstate Highway System) and the possible effect of season-to-season climatic variation on road transport. We found that improvements in railroad technology and infrastructure have created a safer overall operating environment for railroad freight shipments. We also found recent evidence of an increase in accident rates of heavy combination trucks in states that have raised highway speed limits. Finally, cold weather increases road transport risk, while conditions associated with higher ambient temperatures do not. This last finding is in contrast to rail transport, for which the literature associates both hot and cold temperature extremes with higher accident rates

  18. Personal interests hinder Rail Baltica

    Index Scriptorium Estoniae

    2011-01-01

    Läti seimi liige Janis Reirs leiab, et Rail Baltica ehitus on Moskva ja Riia vahelise raudtee ehitusest prioriteetsem, kuna esimest võib potentsiaalselt finantseerida Euroopa Liit. Transpordiminister Uldis Augulis kohtub oma Venemaa kolleegi Igor Levitiniga 7. aprillil. Peaminister Valdis Dombrovskise sõnul vajavad mõlemad projektid majandusanalüüsi

  19. Food irradiation in the United States

    International Nuclear Information System (INIS)

    Pauli, G.H.

    1991-01-01

    Since 1963, some irradiated foods have been permitted for sale in the United States. Yet, at this time, commercial application has been limited to irradiation of a relatively small fraction of the spices and seasonings used as ingredients in other foods. The current situation regarding irradiated foods in the United States and how it developed is discussed. The author writes from experience gained as a Government regulator concerned primarily with ensuring safety of food and therefore this is stressed together with the crucial role played by consumers and industry. (author)

  20. Truck and rail charges for shipping spent fuel and nuclear waste

    International Nuclear Information System (INIS)

    McNair, G.W.; Cole, B.M.; Cross, R.E.; Votaw, E.F.

    1986-06-01

    The Pacific Northwest Laboratory developed techniques for calculating estimates of nuclear-waste shipping costs and compiled a listing of representative data that facilitate incorporation of reference shipping costs into varius logistics analyses. The formulas that were developed can be used to estimate costs that will be incurred for shipping spent fuel or nuclear waste by either legal-weight truck or general-freight rail. The basic data for this study were obtained from tariffs of a truck carrier licensed to serve the 48 contiguous states and from various rail freight tariff guides. Also, current transportation regulations as issued by the US Department of Transportation and the Nuclear Regulatory Commission were investigated. The costs that will be incurred for shipping spent fuel and/or nuclear waste, as addressed by the tariff guides, are based on a complex set of conditions involving the shipment origin, route, destination, weight, size, and volume and the frequency of shipments, existing competition, and the length of contracts. While the complexity of these conditions is an important factor in arriving at a ''correct'' cost, deregulation of the transportation industry means that costs are much more subject to negotiation and, thus, the actual fee that will be charged will not be determined until a shipping contract is actually signed. This study is designed to provide the baseline data necessary for making comparisons of the estimated costs of shipping spent fuel and/or nuclear wastes by truck and rail transportation modes. The scope of the work presented in this document is limited to the costs incurred for shipping, and does not include packaging, cask purchase/lease costs, or local fees placed on shipments of radioactive materials