31 CFR 500.321 - United States; continental United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 500.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including U.S. trust territories...

31 CFR 535.321 - United States; continental United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 535.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof including the Trust Territory of...

Fine pitch thermosonic wire bonding: analysis of state-of-the-art manufacturing capability

Science.gov (United States)

Cavasin, Daniel

1995-09-01

A comprehensive process characterization was performed at the Motorola plastic package assembly site in Selangor, Malaysia, to document the current fine pitch wire bond process capability, using state-of-the-art equipment, in an actual manufacturing environment. Two machines, representing the latest technology from two separate manufacturers, were operated one shift per day for five days, bonding a 132 lead Plastic Quad Flat Pack. Using a test device specifically designed for fine pitch wire bonding, the bonding programs were alternated between 107 micrometers and 92 micrometers pad pitch, running each pitch for a total of 1600 units per machine. Wire, capillary type, and related materials were standardized and commercially available. A video metrology measurement system, with a demonstrated six sigma repeatability band width of 0.51 micrometers , was utilized to measure the bonded units for bond dimensions and placement. Standard Quality Assurance (QA) metrics were also performed. Results indicate that state-of-the-art thermosonic wire bonding can achieve acceptable assembly yields at these fine pad pitches.

Electronic manufacturing and packaging in Japan

Science.gov (United States)

Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

1995-01-01

This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

An evaluation of the Manufacturer And User Facility Device Experience database that inspired the United States Food and Drug Administration's Reclassification of transvaginal mesh.

Science.gov (United States)

Sandberg, Jason M; Gray, Ian; Pearlman, Amy; Terlecki, Ryan P

2018-03-01

To assess the utility of the Manufacturer And User Facility Device Experience (MAUDE) database in objectively capturing adverse events for transvaginal mesh in the United States. We reviewed 1,103 individual medical device reports submitted to the MAUDE database that inspired the United States (US) Food and Drug Administration's 2008 Public Health Notification. Entries were compiled into a categorical database that reported manufacturer, brand, reporter type, report source, and type of adverse event. There were numerous examples of missing, duplicated, and non-standardized entries. Analysis revealed 64 reports with duplicated information, and six reports representing multiple patients. Forty-seven percent of medical device reports did not identify a reporter source. At least 28% of reported devices are no longer on the US market. There was wide variability in the quality and completeness of submitted reports and true adverse event rates could not be accurately calculated because the number of total cases was unknown. The MAUDE database was limited in its ability to collect, quantify, and standardize real-life adverse events related to transvaginal mesh. While it functions to collect information related to isolated adverse events, systematic limitations of the MAUDE database, that no doubt extend to other medical devices, necessitate the development of new reporting systems. Alternatives are under development, which may allow regulators to more accurately scrutinize the safety profiles of specific medical devices.

Rapanos v. United States & Carabell v. United States

Science.gov (United States)

Documents associated with guidance for implementing the definition of waters of the United States under the Clean Water Act following the Rapanos v. United States, and Carabell v. United States Supreme Court decision.

Trial manufacture of round mask for TV fluoroscopic unit

International Nuclear Information System (INIS)

Matsuoka, Shoji; Matsumoto, Yukio

1977-01-01

Demands for revision of existing medical law were described together with an introduction of TV fluoroscopic unit. Round mask, which does not always press out the bottom face of used x-ray beam from the effective primary fluorescent face of photomultiplier inspite of shifting of a spot in time of TV fluoroscopy, was manufactured for trial, and it was furnished with already established fluoroscopic stand. It is used in daily examination without any trouble. Round mask was divided into two parts, and opened upward and downward quickly by lod motor in time of photographing. Multiple iris was operated in order to fit to film size, and round mask was closed at the same time of the finishment of photographing and fluoroscopy was performed again. Item 3 of Para 2 of Art 30 of the existing medical low states that it is good not to press out, the distance between x-ray focus and fluorescent screen, and used x-ray beam from fluorescent screen. However, a regulation, which states that x-ray beam should not be pressed out from effective primary fluorescent face in x-ray fluoroscopy using photomultiplier, must be added. Improvement of the existing unit is expected, and decrease of unnecessary exposure even in small amount is proposed. (Tsunoda, M.)

Transferring Knowledge in the Relocation of Manufacturing Units

DEFF Research Database (Denmark)

Yang, Cheng; Madsen, Erik; Liangsiri, Jirapha

2010-01-01

ABSTRACT Purpose--The global spread of production makes companies relocating their manufacturing units frequently. Not only equipments, systems and facilities, need to be moved, but the transfer of operational knowledge and experience seem to be a major challenge. However, discussions on knowledge...... transfer are derived predominantly from a cognitive perspective and normally focus on the organizational level. Thus, from the perspective of operations management, this paper aims to explore how to transfer production know-how on the shop floor level when manufacturing units are relocated and the paper...... indicate which means can be used to support this intra-firm transfer process. Design/methodology/approach--Four cases are identified from two action research projects on the basis of observations over one-and-half years and semi-structured interviews with more than 59 people. Other methods, such as surveys...

Carbon Fiber Manufacturing Facility Siting and Policy Considerations: International Comparison

Energy Technology Data Exchange (ETDEWEB)

Cook, Jeffrey J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booth, Samuel [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-06-21

Carbon fiber is increasingly used in a wide variety of applications due largely to its superior material properties such as high strength-to-weight ratio. The current global carbon fiber manufacturing industry is predominately located in China, Europe, Japan, and the United States. The carbon fiber market is expected to expand significantly through 2024 and to require additional manufacturing capacity to meet demand. Carbon fiber manufacturing facilities can offer significant economic development and employment opportunities as exemplified by the $1 billion investment and 500 jobs expected at a new Toray plant in Moore, South Carolina. Though the market is expected to expand, it is unclear where new manufacturing facilities will locate to meet demand. This uncertainty stems from the lack of research evaluating how different nations with significant carbon fiber manufacturing capacity compare as it relates to certain manufacturing facility siting factors such as costs of labor and energy as well as policy directed at supporting carbon fiber development, domestic deployment, and exports. This report fills these gaps by evaluating the top carbon fiber manufacturing countries, including China, European Union countries, Japan, Mexico, South Korea, Taiwan, and the United States. The report documents how the United States compares to these countries based on a range of manufacturing siting considerations and existing policies related to carbon fiber. It concludes with a discussion of various policy options the United States could adopt to both (1) increase the competitiveness of the United States as it relates to attracting new carbon fiber manufacturing and (2) foster broader end-use markets for deployment.

An evaluation of the Manufacturer And User Facility Device Experience database that inspired the United States Food and Drug Administration's Reclassification of transvaginal mesh

Directory of Open Access Journals (Sweden)

Jason M. Sandberg

2018-03-01

Full Text Available Purpose: To assess the utility of the Manufacturer And User Facility Device Experience (MAUDE database in objectively capturing adverse events for transvaginal mesh in the United States. Materials and Methods: We reviewed 1,103 individual medical device reports submitted to the MAUDE database that inspired the United States (US Food and Drug Administration's 2008 Public Health Notification. Entries were compiled into a categorical database that reported manufacturer, brand, reporter type, report source, and type of adverse event. Results: There were numerous examples of missing, duplicated, and non-standardized entries. Analysis revealed 64 reports with duplicated information, and six reports representing multiple patients. Forty-seven percent of medical device reports did not identify a reporter source. At least 28% of reported devices are no longer on the US market. There was wide variability in the quality and completeness of submitted reports and true adverse event rates could not be accurately calculated because the number of total cases was unknown. Conclusions: The MAUDE database was limited in its ability to collect, quantify, and standardize real-life adverse events related to transvaginal mesh. While it functions to collect information related to isolated adverse events, systematic limitations of the MAUDE database, that no doubt extend to other medical devices, necessitate the development of new reporting systems. Alternatives are under development, which may allow regulators to more accurately scrutinize the safety profiles of specific medical devices.

Vanadium recycling in the United States in 2004

Science.gov (United States)

Goonan, Thomas G.

2011-01-01

As one of a series of reports that describe the recycling of metal commodities in the United States, this report discusses the flow of vanadium in the U.S. economy in 2004. This report includes a description of vanadium supply and demand in the United States and illustrates the extent of vanadium recycling and recycling trends. In 2004, apparent vanadium consumption, by end use, in the United States was 3,820 metric tons (t) in steelmaking and 232 t in manufacturing, of which 17 t was for the production of superalloys and 215 t was for the production of other alloys, cast iron, catalysts, and chemicals. Vanadium use in steel is almost entirely dissipative because recovery of vanadium from steel scrap is chemically impeded under the oxidizing conditions in steelmaking furnaces. The greatest amount of vanadium recycling is in the superalloy, other-alloy, and catalyst sectors of the vanadium market. Vanadium-bearing catalysts are associated with hydrocarbon recovery and refining in the oil industry. In 2004, 2,850 t of vanadium contained in alloy scrap and spent catalysts was recycled, which amounted to about 44 percent of U.S. domestic production. About 94 percent of vanadium use in the United States was dissipative (3,820 t in steel/4,050 t in steel+fabricated products).

27 CFR 26.201a - Production in the Virgin Islands for tax-free shipment to the United States.

Science.gov (United States)

2010-04-01

...) Industrial spirits produced or manufactured in the Virgin Islands and shipped to the United States free of... containing denatured spirits are to be shipped to the United States free of tax. [T.D. 6402, 24 FR 6090, July...

An analysis of at-home demand for ice cream in the United States

OpenAIRE

Davis, Chris; Blayney, Don; Yen, Steven; Cooper, Joseph C.

2009-01-01

Ice cream has been manufactured commercially in the United States since the middle of the 19th century. Ice cream and frozen dessert products comprise an important and relatively stable component of the United States dairy industry. As with many other dairy products, ice cream is differentiated in several dimensions. A censored translog demand system model was employed to analyze purchases of 3 ice cream product categories. The objective of this study was to determine ...

Evaluation of marginal and internal gap of three-unit metal framework according to subtractive manufacturing and additive manufacturing of CAD/CAM systems.

Science.gov (United States)

Kim, Dong-Yeon; Kim, Eo-Bin; Kim, Hae-Young; Kim, Ji-Hwan; Kim, Woong-Chul

2017-12-01

To evaluate the fit of a three-unit metal framework of fixed dental prostheses made by subtractive and additive manufacturing. One master model of metal was fabricated. Twenty silicone impressions were made on the master die, working die of 10 poured with Type 4 stone, and working die of 10 made of scannable stone. Ten three-unit wax frameworks were fabricated by wax-up from Type IV working die. Stereolithography files of 10 three-unit frameworks were obtained using a model scanner and three-dimensional design software on a scannable working die. The three-unit wax framework was fabricated using subtractive manufacturing (SM) by applying the prepared stereolithography file, and the resin framework was fabricated by additive manufacturing (AM); both used metal alloy castings for metal frameworks. Marginal and internal gap were measured using silicone replica technique and digital microscope. Measurement data were analyzed by Kruskal-Wallis H test and Mann-Whitney U-test (α=.05). The lowest and highest gaps between premolar and molar margins were in the SM group and the AM group, respectively. There was a statistically significant difference in the marginal gap among the 3 groups ( P manufacturing are clinically applicable. However, additive manufacturing requires more research to be applied clinically.

Additive Manufacturing Solutions in the United States Marine Corps

Science.gov (United States)

2017-12-01

public release. Distribution is unlimited. 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) This project conducts a cost benefit analysis to...continuous liquid interface production (CLIP). The findings from the cost benefit analysis show a cost advantage for additive manufacturing at the...Corps, cost benefit analysis, CLIP 15. NUMBER OF PAGES 119 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY

Comparative assessment of coal tars obtained from 10 former manufactured gas plant sites in the eastern United States

Energy Technology Data Exchange (ETDEWEB)

Brown, D.G.; Gupta, L.; Kim, T.H.; Moo-Young, H.K.; Coleman, A.J. [Lehigh University, Bethlehem, PA (United States). Dept. of Civil & Environmental Engineering

2006-11-15

A comparative analysis was performed on eleven coal tars obtained from former manufactured gas plant sites in the eastern United States. Bulk properties analyzed included percent ash, Karl Fisher water content, viscosity and average molecular weight. Chemical properties included monocyclic- and polycyclic-aromatic hydrocarbon (PAH) concentrations, alkylated aromatic concentrations, and concentrations of aliphatic and aromatic fractions. It was found that there was at least an order-of-magnitude variation in all properties measured between the eleven coal tars. Additionally, two coal tars obtained from the same manufactured gas plant site had very different properties, highlighting that there can be wide variations in coal tar properties from different samples obtained from the same site. Similarities were also observed between the coal tars. The relative chemical distributions were similar for all coal tars, and the coal tars predominantly consisted of PAHs, with naphthalene being the single-most prevalent compound. The C{sub 9-22} aromatic fraction, an indicator of all PAHs up to a molecular weight of approximately 276 g mole{sup -1}, showed a strong power-law relationship with the coal tar average molecular weight (MWct). And the concentrations of individual PAHs decreased linearly as MWct increased up to ca. 1000 g mole{sup -1}, above which they remained low and variable. Implications of these properties and their variation with MWct on groundwater quality are discussed. Ultimately, while these similarities do allow generalities to be made about coal tars, the wide range of coal tar bulk and chemical properties reported here highlights the complex nature of coal tars.

Envisioning Oneself as a Leader: Comparisons of Women and Men in Spain and the United States

Science.gov (United States)

Killeen, Lauren A.; Lopez-Zafra, Esther; Eagly, Alice H.

2006-01-01

In an examination of aspirations for leadership in the United States and Spain, male and female students envisioned themselves as a chief executive officer, vice president, or mid-level manager in an industry with a feminine image (clothing manufacturing) or a masculine image (auto manufacturing). Although men and women perceived these roles as…

Job creation due to nuclear power resurgence in the United States

International Nuclear Information System (INIS)

Kenley, C.R.; Klingler, R.D.; Plowman, C.M.; Soto, R.; Turk, R.J.; Baker, R.L.; Close, S.A.; McDonnell, V.L.; Paul, S.W.; Rabideau, L.R.; Rao, S.S.; Reilly, B.P.

2009-01-01

The recent revival of global interest in the next generation of nuclear power reactors is causing a re-examination of the role of nuclear power in the United States. This renewed interest has led to questions regarding the capability and capacity of current US industries to support a renewal of nuclear power plant deployment. Key among the many questions currently being asked is what potential exists for the creation of new jobs as a result of developing and operating these new plants? Idaho National Laboratory and Bechtel Power Corporation collaborated to perform a Department of Energy-sponsored study that evaluated the potential for job creation in the United States should these new next generation nuclear power plants be built. The study focused primarily on providing an initial estimate of the numbers of new manufacturing jobs that could be created, including those that could be repatriated from overseas, resulting from the construction of these new reactors. In addition to the growth in the manufacturing sector, the study attempted to estimate the potential increase in construction trades necessary to accomplish the new construction. (author)

Whither North Carolina furniture manufacturing?

OpenAIRE

Robert L. Lacy

2004-01-01

North Carolina's furniture manufacturing industry has contracted in recent years as imports have gained a greater share of the domestic furniture market. Rapid growth of the furniture industry in China and a surge in exports from that country to the United States in particular have contributed to plant closings and consolidation of operations in the state. North Carolina's furniture manufacturers are adapting to the emergence of global competition and are developing new corporate strategies t...

Manufacture of endothelial colony-forming progenitor cells from steady-state peripheral blood leukapheresis using pooled human platelet lysate.

Science.gov (United States)

Siegel, Georg; Fleck, Erika; Elser, Stefanie; Hermanutz-Klein, Ursula; Waidmann, Marc; Northoff, Hinnak; Seifried, Erhard; Schäfer, Richard

2018-05-01

Endothelial colony-forming progenitor cells (ECFCs) are promising candidates for cell therapies. However, ECFC translation to the clinic requires optimized isolation and manufacture technologies according to good manufacturing practice (GMP). ECFCs were manufactured from steady-state peripheral blood (PB) leukapheresis (11 donors), using GMP-compliant technologies including pooled human platelet (PLT) lysate, and compared to human umbilical cord endothelial cells, human aortic endothelial cells, and human cerebral microvascular endothelial cells. Specific variables assessed were growth kinetics, phenotype, trophic factors production, stimulation of tube formation, and Dil-AcLDL uptake. ECFCs could be isolated from PB leukapheresis units with mean processed volume of 5411 mL and mean white blood cell (WBC) concentration factor of 8.74. The mean frequency was 1.44 × 10 -8 ECFCs per WBC, corresponding to a mean of 177.8 ECFCs per apheresis unit. Expandable for up to 12 cumulative population doublings, calculated projection showed that approximately 730 × 10 3 ECFCs could be manufactured from 1 apheresis unit. ECFCs produced epidermal growth factor, hepatocyte growth factor, vascular endothelial growth factor (VEGF)-A, PLT-derived growth factor-B, interleukin-8, and monocyte chemoattractant protein-1, featured high potential for capillary-like tubes formation, and showed no telomerase activity. They were characterized by CD29, CD31, CD44, CD105, CD117, CD133, CD144, CD146, and VEGF-R2 expression, with the most common subpopulation CD34+CD117-CD133-. Compared to controls, ECFCs featured greater Dil-AcLDL uptake and higher expression of CD29, CD31, CD34, CD44, CD144, and VEGF-R2. Here we show that isolation of ECFCs with proangiogenic profile from steady-state PB leukapheresis is feasible, marking a first step toward ECFC product manufacture according to GMP. © 2018 AABB.

Private sector risk-sharing agreements in the United States: trends, barriers, and prospects.

Science.gov (United States)

Garrison, Louis P; Carlson, Josh J; Bajaj, Preeti S; Towse, Adrian; Neumann, Peter J; Sullivan, Sean D; Westrich, Kimberly; Dubois, Robert W

2015-09-01

Risk-sharing agreements (RSAs) between drug manufacturers and payers link coverage and reimbursement to real-world performance or utilization of medical products. These arrangements have garnered considerable attention in recent years. However, greater use outside the United States raises questions as to why their use has been limited in the US private sector, and whether their use might increase in the evolving US healthcare system. To understand current trends, success factors, and challenges in the use of RSAs, we conducted a review of RSAs, interviews, and a survey to understand key stakeholders' experiences and expectations for RSAs in the US private sector. Trends in the numbers of RSAs were assessed using a database of RSAs. We also conducted in-depth interviews with stakeholders from pharmaceutical companies, payer organizations, and industry experts in the United States and European Union. In addition, we administered an online survey with a broader audience to identify perceptions of the future of RSAs in the United States. Most manufacturers and payers expressed interest in RSAs and see potential value in their use. Due to numerous barriers associated with outcomes-based agreements, stakeholders were more optimistic about financial-based RSAs. In the US private sector, however, there remains considerable interest--improved data systems and shifting incentives (via health reform and accountable care organizations) may generate more action. In the US commercial payer markets, there is continued interest among some manufacturers and payers in outcomes-based RSAs. Despite continued discussion and activity, the number of new agreements is still small.

JTEC Panel report on electronic manufacturing and packaging in Japan

Science.gov (United States)

Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John; Meieran, Gene; Pecht, Michael; Peeples, John; Tummala, Rao; Dehaemer, Michael J.; Holdridge, Geoff (Editor); Gamota, George

1995-01-01

This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies.

The contemporary cement cycle of the United States

Science.gov (United States)

Kapur, A.; Van Oss, H. G.; Keoleian, G.; Kesler, S.E.; Kendall, A.

2009-01-01

A country-level stock and flow model for cement, an important construction material, was developed based on a material flow analysis framework. Using this model, the contemporary cement cycle of the United States was constructed by analyzing production, import, and export data for different stages of the cement cycle. The United States currently supplies approximately 80% of its cement consumption through domestic production and the rest is imported. The average annual net addition of in-use new cement stock over the period 2000-2004 was approximately 83 million metric tons and amounts to 2.3 tons per capita of concrete. Nonfuel carbon dioxide emissions (42 million metric tons per year) from the calcination phase of cement manufacture account for 62% of the total 68 million tons per year of cement production residues. The end-of-life cement discards are estimated to be 33 million metric tons per year, of which between 30% and 80% is recycled. A significant portion of the infrastructure in the United States is reaching the end of its useful life and will need to be replaced or rehabilitated; this could require far more cement than might be expected from economic forecasts of demand for cement. ?? 2009 Springer Japan.

Free-world microelectronic manufacturing equipment

Science.gov (United States)

Kilby, J. S.; Arnold, W. H.; Booth, W. T.; Cunningham, J. A.; Hutcheson, J. D.; Owen, R. W.; Runyan, W. R.; McKenney, Barbara L.; McGrain, Moira; Taub, Renee G.

1988-12-01

Equipment is examined and evaluated for the manufacture of microelectronic integrated circuit devices and sources for that equipment within the Free World. Equipment suitable for the following are examined: single-crystal silicon slice manufacturing and processing; required lithographic processes; wafer processing; device packaging; and test of digital integrated circuits. Availability of the equipment is also discussed, now and in the near future. Very adequate equipment for most stages of the integrated circuit manufacturing process is available from several sources, in different countries, although the best and most widely used versions of most manufacturing equipment are made in the United States or Japan. There is also an active market in used equipment, suitable for manufacture of capable integrated circuits with performance somewhat short of the present state of the art.

21 CFR 1005.25 - Service of process on manufacturers.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Service of process on manufacturers. 1005.25....25 Service of process on manufacturers. (a) Every manufacturer of electronic products, prior to... United States as the manufacturer's agent upon whom service of all processes, notices, orders, decisions...

Payer and Pharmaceutical Manufacturer Considerations for Outcomes-Based Agreements in the United States.

Science.gov (United States)

Brown, Joshua D; Sheer, Rich; Pasquale, Margaret; Sudharshan, Lavanya; Axelsen, Kirsten; Subedi, Prasun; Wiederkehr, Daniel; Brownfield, Fred; Kamal-Bahl, Sachin

2018-01-01

Considerable interest exists among health care payers and pharmaceutical manufacturers in designing outcomes-based agreements (OBAs) for medications for which evidence on real-world effectiveness is limited at product launch. To build hypothetical OBA models in which both payer and manufacturer can benefit. Models were developed for a hypothetical hypercholesterolemia OBA, in which the OBA was assumed to increase market access for a newly marketed medication. Fixed inputs were drug and outcome event costs from the literature over a 1-year OBA period. Model estimates were developed using a range of inputs for medication effectiveness, medical cost offsets, and the treated population size. Positive or negative feedback to the manufacturer was incorporated on the basis of expectations of drug performance through changes in the reimbursement level. Model simulations demonstrated that parameters had the greatest impact on payer cost and manufacturer reimbursement. Models suggested that changes in the size of the population treated and drug effectiveness had the largest influence on reimbursement and costs. Despite sharing risk for potential product underperformance, manufacturer reimbursement increased relative to having no OBA, if the OBA improved market access for the new product. Although reduction in medical costs did not fully offset the cost of the medication, the payer could still save on net costs per patient relative to having no OBA by tying reimbursement to drug effectiveness. Pharmaceutical manufacturers and health care payers have demonstrated interest in OBAs, and under a certain set of assumptions both may benefit. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Nickel recycling in the United States in 2004

Science.gov (United States)

Goonan, Thomas G.

2009-01-01

As one of a series of reports that describe the recycling of metal commodities in the United States, this report discusses the flow of nickel from production through distribution and use, with particular emphasis on the recycling of industrial scrap (new scrap) and used products (old scrap) in 2004. This materials flow study includes a description of nickel supply and demand for the United States to illustrate the extent of nickel recycling and to identify recycling trends. Understanding how materials flow from a source through disposition can aid in improving the management of natural resource delivery systems. In 2004, the old scrap recycling efficiency for nickel was estimated to be 56.2 percent. In 2004, nickel scrap consumption in the United States was as follows: new scrap containing 13,000 metric tons (t) of nickel (produced during the manufacture of products), 12 percent; and old scrap containing 95,000 t of nickel (articles discarded after serving a useful purpose), 88 percent. The recycling rate for nickel in 2004 was 40.9 percent, and the percentage of nickel in products attributed to nickel recovered from nickel-containing scrap was 51.6 percent. Furthermore, U.S. nickel scrap theoretically generated in 2004 had the following distribution: scrap to landfills, 24 percent; recovered and used scrap, 50 percent; and unaccounted for scrap, 26 percent. Of the 50 percent of old scrap generated in the United States that was recovered and then used in 2004, about one-third was exported and two-thirds was consumed in the domestic production of nickel-containing products.

7 CFR 1220.615 - State and United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false State and United States. 1220.615 Section 1220.615... CONSUMER INFORMATION Procedures To Request a Referendum Definitions § 1220.615 State and United States. State and United States include the 50 States of the United States of America, the District of Columbia...

7 CFR 1220.129 - State and United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false State and United States. 1220.129 Section 1220.129... CONSUMER INFORMATION Soybean Promotion and Research Order Definitions § 1220.129 State and United States. The terms State and United States include the 50 States of the United States of America, the District...

Methodology for systematic analysis and improvement of manufacturing unit process life-cycle inventory (UPLCI)—CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: Methodology description

DEFF Research Database (Denmark)

Kellens, Karel; Dewulf, Wim; Overcash, Michael

2012-01-01

the provision of high-quality data for LCA studies of products using these unit process datasets for the manufacturing processes, as well as the in-depth analysis of individual manufacturing unit processes.In addition, the accruing availability of data for a range of similar machines (same process, different......This report proposes a life-cycle analysis (LCA)-oriented methodology for systematic inventory analysis of the use phase of manufacturing unit processes providing unit process datasets to be used in life-cycle inventory (LCI) databases and libraries. The methodology has been developed...... and resource efficiency improvements of the manufacturing unit process. To ensure optimal reproducibility and applicability, documentation guidelines for data and metadata are included in both approaches. Guidance on definition of functional unit and reference flow as well as on determination of system...

Organizational Considerations for Advanced Manufacturing Technology

Science.gov (United States)

DeRuntz, Bruce D.; Turner, Roger M.

2003-01-01

In the last several decades, the United States has experienced a decline in productivity, while the world has seen a maturation of the global marketplace. Nations have moved manufacturing strategy and process technology issues to the top of management priority lists. The issues surrounding manufacturing technologies and their implementations have…

Unit operation in food manufacturing and processing. Shokuhin seizo/kako ni okeru tan'i sosa

Energy Technology Data Exchange (ETDEWEB)

Matsuno, R. (Kyoto Univ., Kyoto (Japan). Faculty of Aguriculture)

1993-09-05

Processed foods must be produced in mass, cheap and safe and should be suitable for the delicate taste of human being. Food tastes are effected by an outlook on human attitude, and the surrounding environment. And these factors are reflected to unit operation in food manufacturing and processing and it is clarified that there are many technical difficulties. The characteristics of unit operation for food manufacturing and processing are that the food materials are a multicomponent system, moreover, a very small amount of aroma components, taste components, vitamin, physiologically activation materials and so on are more important than the main components, and also inapplicable of the model centering to the most quantitative component. The purpose of unit operation in food manufacturing and processing is to produce the properties of matter matching to human sense, and therefore there are many problems left unsolved. The development of analytical technology also has an influence on manufacturing and processing technology. Consequently, food manufacturing and processing technology must be based on general science. It is necessary to develop unit operation with an understanding of mutual effect between food and human body.

Means for Transferring Knowledge in the Relocation of Manufacturing Units

DEFF Research Database (Denmark)

Yang, Cheng; Madsen, Erik Skov; Liangsiri, Jirapha

2009-01-01

The global spread of production makes companies relocating their manufacturing units to achieve economies of scale, enjoy low-cost labor, or access to new markets. For the relocation, not only equipments, systems and facilities, need to be moved, but also operational knowledge and experience. Based...

Lumber attributes, characteristics, and species preferences as indicated by secondary wood products firms in the continental United States.

Science.gov (United States)

David L. Nicholls; Joseph. Roos

2006-01-01

The purpose of this research was to evaluate selected lumber attributes, species preferences, and lumber use properties among secondary wood manufacturers in the United States. Our sample included producers of kitchen cabinets, furniture, doors, windows, and molded products who attended regional and national wood manufacturing events. More than 51% of respondents had...

Economic input-output life-cycle assessment of trade between Canada and the United States.

Science.gov (United States)

Norman, Jonathan; Charpentier, Alex D; MacLean, Heather L

2007-03-01

With increasing trade liberalization, attempts at accounting for environmental impacts and energy use across the manufacturing supply chain are complicated by the predominance of internationally supplied resources and products. This is particularly true for Canada and the United States, the world's largest trading partners. We use an economic input-output life-cycle assessment (EIO-LCA) technique to estimate the economy-wide energy intensity and greenhouse gas (GHG) emissions intensity for 45 manufacturing and resource sectors in Canada and the United States. Overall, we find that U.S. manufacturing and resource industries are about 1.15 times as energy-intensive and 1.3 times as GHG-intensive as Canadian industries, with significant sector-specific discrepancies in energy and GHG intensity. This trend is mainly due to a greater direct reliance on fossil fuels for many U.S. industries, in addition to a highly fossil-fuel based electricity mix in the U.S. To account for these differences, we develop a 76 sector binational EIO-LCA model that implicitly considers trade in goods between Canada and the U.S. Our findings show that accounting for trade can significantly alter the results of life-cycle assessment studies, particularly for many Canadian manufacturing sectors, and the production/consumption of goods in one country often exerts significant energy- and GHG-influences on the other.

7 CFR 1209.21 - State and United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false State and United States. 1209.21 Section 1209.21... Definitions § 1209.21 State and United States. (a) State means any of the several States, the District of Columbia, and the Commonwealth of Puerto Rico. (b) United States means collectively the several States of...

Technological Impacts: Manufacturing and the Economy

Science.gov (United States)

Childress, Vincent W.

2012-01-01

For the past two decades, and recently with the economic recession, the media has emphasized the decline of manufacturing in the United States and other developed countries. In the U.S., some initially blamed the North American Free Trade Agreement (NAFTA) for this decline. Hearing that manufacturing is on the decline, one might reason that its…

Advanced Reactor Development in the United States

Energy Technology Data Exchange (ETDEWEB)

Giessing, D. F.; Griffith, J. D.; McGoff, D. J.; Rosen, Sol [U. S. Department of Energy, Texas (United States)

1990-04-15

In the United States, three technologies are employed for the new generation of advanced reactors. These technologies are Advanced Light Water Reactors (A LWRs) for the 1990s and beyond, the Modular High Temperature Gas Reactor (M HTGR) for commercial use after the turn of the century, and Liquid Metal Reactors (LWRs) to provide energy production and to convert reactor fission waste to a more manageable waste product. Each technology contributes to the energy solution. Light Water Reactors For The 1990s And Beyond--The U. S. Program The economic and national security of the United States requires a diversified energy supply base built primarily upon adequate, domestic resources that are relatively free from international pressures. Nuclear energy is a vital component of this supply and is essential to meet current and future national energy demands. It is a safe, economically continues to contribute to national energy stability, and strength. The Light Water Reactor (LWR) has been a major and successful contributor to the electrical generating needs of many nations throughout the world. It is being counted upon in the United States as a key to revitalizing nuclear energy option in the 1990s. In recent years, DOE joined with the industry to ensure the availability and future viability of the LWR option. This national program has the participation of the Nation's utility industry, the Electric Power Research Institute (EPRI), and several of the major reactor manufacturers and architect-engineers. Separate but coordinated parts of this program are managed by EPRI and DOE.

Exploring manufacturing competencies of a two wheeler manufacturing unit

Science.gov (United States)

Deep Singh, Chandan; Singh Khamba, Jaimal; Singh, Rajdeep; Singh, Navdeep

2014-07-01

The two wheeler industry of India is one of the most dependable industries as every person has at least a two wheeler with him, if not any four wheeler. Earlier there were scooters like Bajaj Chetak, Priya but with evolution of motorcycles like splendor, splendor+, etc. the scooter market started declining but with arrival of gearless scooters like Honda Activa, Scooty Pep, etc. the market place has become increasingly competitive in recent time and industries are facing tough test of improving products and thus market share. The competitiveness among industries is an important issue. Competency development is a vital tool to enhance the competitiveness of industries. Based, on aggregate performance of a firm, it comprehensively explores the varying importance of manufacturing competencies and drives of industrial competitiveness. Hence by, exploring the manufacturing competencies of a two wheeler industry, one can reflect the competitiveness of two wheeler manufacturing industry as a whole. This study presents various factors of manufacturing competencies affecting industrial competitiveness as the significance of these competencies is increasing day by day in two wheeler manufacturing industry.

Exploring manufacturing competencies of a two wheeler manufacturing unit

International Nuclear Information System (INIS)

Singh, Chandan Deep; Khamba, Jaimal Singh; Singh, Rajdeep; Singh, Navdeep

2014-01-01

The two wheeler industry of India is one of the most dependable industries as every person has at least a two wheeler with him, if not any four wheeler. Earlier there were scooters like Bajaj Chetak, Priya but with evolution of motorcycles like splendor, splendor+, etc. the scooter market started declining but with arrival of gearless scooters like Honda Activa, Scooty Pep, etc. the market place has become increasingly competitive in recent time and industries are facing tough test of improving products and thus market share. The competitiveness among industries is an important issue. Competency development is a vital tool to enhance the competitiveness of industries. Based, on aggregate performance of a firm, it comprehensively explores the varying importance of manufacturing competencies and drives of industrial competitiveness. Hence by, exploring the manufacturing competencies of a two wheeler industry, one can reflect the competitiveness of two wheeler manufacturing industry as a whole. This study presents various factors of manufacturing competencies affecting industrial competitiveness as the significance of these competencies is increasing day by day in two wheeler manufacturing industry

Advanced Manufacturing Office Clean Water Processing Technologies

Energy Technology Data Exchange (ETDEWEB)

None

2018-03-01

The DOE Office of Energy Efficiency and Renewable Energy (EERE)’s Advanced Manufacturing Office partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality domestic manufacturing jobs and enhance the global competitiveness of the United States.

31 CFR 92.1 - Manufacture of medals.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Manufacture of medals. 92.1 Section 92.1 Money and Finance: Treasury Regulations Relating to Money and Finance UNITED STATES MINT OPERATIONS AND PROCEDURES Numismatic Operations § 92.1 Manufacture of medals. With the approval of the...

The effect of China exportations to the United States of America in the job demand of the manufacturing sector of Mexico 2004-2012

Directory of Open Access Journals (Sweden)

Jorge Eduardo Mendoza Cota

2013-12-01

Full Text Available Recently the manufacturing sector of Mexico has experienced a reduced rate of growth. This study estimates the impact of the industrial activity of the U.S. and China on the demand for labor in the manufacturing sector of the northern border states of Mexico. With data on industrial activity, Chinese exports, wages and the peso-dollar exchange rate, a time series co-integration model is developed. The results show that exports from China to the Usa and manufacturing wages have affected labor demand negatively, while factors such as, the U.S. industrial production and the exchange rate tend to encourage manufacturing activity.

19 CFR 134.35 - Articles substantially changed by manufacture.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Articles substantially changed by manufacture. 134... substantially changed by manufacture. (a) Articles other than goods of a NAFTA country. An article used in the United States in manufacture which results in an article having a name, character, or use differing from...

7 CFR 1160.104 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true United States. 1160.104 Section 1160.104 Agriculture... Definitions § 1160.104 United States. United States means the 48 contiguous states in the continental United States and the District of Columbia, except that United States means the 50 states of the United States...

SOME METHODS FOR SAVING HEAT ENERGY WHILE MANUFACTURING VERTICAL INSULATING GLASS UNITS

Directory of Open Access Journals (Sweden)

S. A. Shybeka

2018-01-01

Full Text Available The paper proposes and considers two constructive methods for saving heat energy while manufacturing vertical insulating glass units with various gas filling of inter-glass space. The first method presupposes manufacturing of insulating glass units having specific thickness which is calculated in accordance with specific features of convective heat exchange in the closed loop circuit. Value of the heat-exchange coefficient depends on gas properties which is filling a chamber capacity (coefficients of thermal conductivity, volumetric expansion, kinematic viscosity, thermometric conducivity, temperature difference on the boundary of interlayer and its thickness. It has been shown that while increasing thickness of gas layer convective heat exchange coefficient is initially decreasing up to specific value and then after insignificant increase it practically remains constant. In this connection optimum thicknesses of filled inter-layers for widely-spread gas in production (dry air, argon, krypton, xenon and for carbon dioxide have determined in the paper. Manufacturing of insulating glass units with large thickness of gas chamber practically does not lead to an increase in resistance to heat transfer but it will increase gas consumption rate. The second industrial economic method is interrelated with application of carbon dioxide СО2 as a filler of inter-glass space which has some advantages in comparison with other gases (small cost due to abundance, nontoxicity, transparency for visual light and absorption of heat rays. Calculations have shown that application of carbon dioxide will make it possible to increase resistance to heat transfer of one-chamber glass unit by 0.05 m²×K/W (with emissivity factor of internal glass – 0.837 or by 0.16 m²×K/W (with emission factor – 0.1 in comparison with the glass unit where a chamber is filled with dry air.

Managing Coil Epoxy Vacuum Impregnation Systems at the Manufacturing Floor Level To Achieve Ultimate Properties in State-of-the-Art Magnet Assemblies

CERN Document Server

Hubrig, Jeffrey G

2005-01-01

Liquid epoxy resin impregnation systems remain a state-of-the-art polymer material for vacuum and vacuum/pressure impregnation applications in the manufacture of both advanced and conventional coil winding configurations. Epoxy resins inherent latitude in processing parameters accounts for their continued popularity in engineering applications, but also for the tendency to overlook or misinterpret the requisite processing parameters on the manufacturing floor. Resin system impregnation must be managed in detail in order to achieve device life cycle reliability. This closer look reveals how manufacturing floor level management of material acceptance, handling and storage, pre- and post- impregnation processing and cure can be built into a manufacturing plan to increase manufacturing yield, lower unit cost and ensure optimum life cycle performance of the coil.

Chapter E: History and Overview of the U.S. Diatomite Mining Industry, with Emphasis on the Western United States

Science.gov (United States)

Moyle, Phillip R.; Dolley, Thomas P.

2003-01-01

The United States is the largest producer and consumer of diatomite in the world. In 2001, the United States produced about a third of the estimated global production of 1.95 million metric tons (Mt) of diatomite (Dolley, 2003). In any given year, the United States accounts for at least 50 percent of all the diatomite exported in the world (Roskill, 1994). Seven diatomite companies operating in the United States produce diatomite in various grades for a range of applications, including filtration, absorbents, fillers, insulation, and cement manufacture. Economic deposits of diatomite within the United States depend on variations in the physical and chemical properties between and within deposits, potential end uses, and proximity to suitable markets. On the basis of historical production figures, estimated U.S. diatomite-production capacity is currently about 800,000 metric tons per year (t/yr).

Can claims, misleading information, and manufacturing issues regarding dietary supplements be improved in the United States?

Science.gov (United States)

Gibson, James E; Taylor, David A

2005-09-01

The safety and effectiveness of over-the-counter (OTC) drugs are assessed through the Food and Drug Administration's (FDA's) OTC drug review. Prescription drugs are approved through the rigorous new drug application (NDA) process. In contrast, dietary supplements are regulated as foods, and the FDA must determine that a dietary supplement ingredient poses a "significant or unreasonable risk of illness or injury" instead of requiring the manufacturer to provide safety data. According to the FDA, there are more than 29,000 different dietary supplements available to consumers today. This momentum has its roots in consumer interest in health and self-care and suggests that Americans are searching for alternatives to conventional foods for physical and mental well being. The Committee on the Framework for Evaluating the Safety of Dietary Supplements was formed under the auspices of the Food and Nutrition Board that produced a report entitled Dietary Supplements: A Framework for Evaluating Safety. Categories of specific information identified for use are 1) human data, 2) animal studies, 3) in vitro experiments, and 4) information on related substances. Several factors were identified to guide the FDA in applying the framework. Two of these factors are expressed as follows: 1) "the appropriate scientific standard to be used to overturn this basic assumption of safety is to demonstrate significant or unreasonable risk, not prove that an ingredient is unsafe"; and 2) "approaches taken by diverse organizations and governmental bodies, both within and outside the United States, which evaluate the safety and at times efficacy of dietary supplement ingredients, vary in their relevance to the protection of the American public from risks associated with consumption of dietary supplement ingredients".

31 CFR 800.225 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 800.225 Section 800... TAKEOVERS BY FOREIGN PERSONS Definitions § 800.225 United States. The term United States or U.S. means the United States of America, the States of the United States, the District of Columbia, and any commonwealth...

7 CFR 1150.106 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true United States. 1150.106 Section 1150.106 Agriculture... Order Definitions § 1150.106 United States. United States means the 48 contiguous States in the continental United States. ...

DOE Request for Information (RFI) DE-FOA-0000153 PV Manufacturing Initiative

Energy Technology Data Exchange (ETDEWEB)

none,

2010-02-01

This draft report summarizes the results of the U.S. Department of Energy PV Manufacturing Request for Information (RFI), DE-FOA-0000153, that was released in September 2009. The PV Manufacturing Initiative is intended to help facilitate the development of a strong PV manufacturing industry in the United States.

Malaria Treatment (United States)

Science.gov (United States)

... Providers, Emergency Consultations, and General Public. Contact Us Malaria Treatment (United States) Recommend on Facebook Tweet Share Compartir Treatment of Malaria: Guidelines For Clinicians (United States) Download PDF version ...

Monthly carbon emissions from natural-gas flaring and cement manufacture in the United States

International Nuclear Information System (INIS)

Blasing, T.J.; Hand, Kimberly

2007-01-01

Annual data on carbon emissions from fossil-fuel combustion and cement manufacture have been used in studies of the carbon cycle for the last few decades. However, annual data do not specify carbon emissions on the seasonal time-scales relevant to biospheric uptake and other processes affecting the carbon cycle. Estimates of monthly emissions from fossil-fuel consumption in the US have shown that an increasing percentage of the annual emissions are occurring during the growing season; however, carbon emitted from flaring natural gas at well sites was not accounted for in those emissions estimates, nor was carbon emitted during cement manufacture. Here we show that emissions from flaring, which amount around 0.1 % of all fossil-fuel carbon emissions in the US, have no clear and persistent annual pattern that can be detected in the data. In contrast, carbon emissions from cement manufacture, which add about 0.7% to carbon emissions from fossil fuels in the US, have a clear and persistent annual pattern including low values in late winter and early spring. In this paper, we provide a few remarks on carbon emissions from natural-gas flaring before presenting monthly emissions estimates. We then focus on the methodology for calculating carbon emissions from cement manufacture before presenting and discussing the monthly emissions estimates

7 CFR 65.255 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false United States. 65.255 Section 65.255 Agriculture..., PEANUTS, AND GINSENG General Provisions Definitions § 65.255 United States. United States means the 50... United States. ...

7 CFR 1250.308 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1250.308 Section 1250.308 Agriculture... Research and Promotion Order Definitions § 1250.308 United States. United States means the 48 contiguous States of the United States of America and the District of Columbia. ...

7 CFR 1205.23 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1205.23 Section 1205.23 Agriculture... Procedures for Conduct of Sign-up Period Definitions § 1205.23 United States. The term United States means the 50 states of the United States of America. Procedures ...

31 CFR 597.318 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 597.318 Section 597... General Definitions § 597.318 United States. The term United States means the United States, its territories, states, commonwealths, districts, and possessions, and all areas under the jurisdiction or...

7 CFR 1219.26 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1219.26 Section 1219.26 Agriculture..., AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.26 United States. United States means collectively the several 50 States of the United States, the District of...

7 CFR 1212.31 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1212.31 Section 1212.31 Agriculture..., Consumer Education, and Industry Information Order Definitions § 1212.31 United States. “United States... territories and possessions of the United States. ...

22 CFR 120.13 - United States.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false United States. 120.13 Section 120.13 Foreign... United States. United States, when used in the geographical sense, includes the several states, the Commonwealth of Puerto Rico, the insular possessions of the United States, the District of Columbia, the...

31 CFR 592.311 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 592.311 Section 592... § 592.311 United States. The term United States, when used in the geographic sense, means the several States, the District of Columbia, and any commonwealth, territory, or possession of the United States. ...

7 CFR 1205.313 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1205.313 Section 1205.313 Agriculture... Research and Promotion Order Definitions § 1205.313 United States. United States means the 50 States of the United States of America. [31 FR 16758, Dec. 31, 1966. Redesignated at 56 FR 64472, Dec. 10, 1991] ...

U.S. Competitiveness Study: How Furniture and Cabinet Manufacturers Compare

Science.gov (United States)

Urs Buehlmann; Matthew Bumgardner; Al Schuler; Rich Christianson

2003-01-01

A disturbing 37.2%, of the 341 manufacturing executives participating in the U.S. Wood Competitiveness Survey either strongly agreed or agreed "that by the end of the decade, little will remain of domestic wood furniture and other wood products manufacturing in the United States."

China-United States Productivity Catch-Up

DEFF Research Database (Denmark)

Deng, Paul Duo; Jefferson, Gary H.

China’s gap in industrial labor productivity with the United States has been steadily shrinking over recent decades. In this paper we examine the main sources of gap reduction and the potential for further catch-up. Using Chinese above-scale firm-level data during 1998-2007 period and BEA industry...... -level data in the US, we first document the respective rates of growth of labor productivity, gap reduction, and contributions to overall catch-up of China’s manufacturing sector during 1998-2007. We then aggregate the firm-level data to the 3-digit industry level to estimate a productivity gap...... reduction function and find that the key drivers for the productivity convergence are the initial technology gap, increased R&D spending, firm’s ownership restructuring, and industry level entry-exit ratio, a measure of competitive dynamism. A key finding is that the catch-up dynamic entails the break out...

31 CFR 542.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 542.310 Section 542.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....310 United States. The term United States means the United States, its territories and possessions...

31 CFR 548.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 548.310 Section 548.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....310 United States. The term United States means the United States, its territories and possessions...

31 CFR 546.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 546.310 Section 546.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....310 United States. The term United States means the United States, its territories and possessions...

31 CFR 586.318 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 586.318 Section 586...) KOSOVO SANCTIONS REGULATIONS General Definitions § 586.318 United States. The term United States means the United States, its territories and possessions, and all areas under the jurisdiction or authority...

31 CFR 537.318 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 537.318 Section 537.318 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....318 United States. The term United States means the United States, its territories and possessions...

31 CFR 585.316 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 585.316 Section 585.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 585.316 United States. The term United States means the United States, its...

31 CFR 575.319 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 575.319 Section 575.319 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....319 United States. The term United States means the United States, its territories and possessions...

31 CFR 539.312 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 539.312 Section 539.312 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 539.312 United States. The term United States means the United States, its...

31 CFR 551.309 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 551.309 Section 551.309 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....309 United States. The term United States means the United States, its territories and possessions...

31 CFR 587.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 587.310 Section 587...) MILOSEVIC SANCTIONS REGULATIONS General Definitions § 587.310 United States. The term United States means the United States, its territories and possessions, and all areas under the jurisdiction or authority...

31 CFR 547.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 547.310 Section 547.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 547.310 United States. The term United States means the United States, its...

Life-cycle environmental performance of renewable building materials in the context of residential construction : phase II research report : an extension to the 2005 phase I research report. Module N, Life-cycle inventory of manufacturing prefinished engineered wood flooring in the eastern United States

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2011-01-01

This study summarizes the environmental performance of prefinished engineered wood flooring using life-cycle inventory (LCI) analysis. Using primary mill data gathered from manufacturers in the eastern United States and applying the methods found in Consortium for Research on Renewable Industrial Materials (CORRIM) Research Guidelines and International Organization of...

31 CFR 598.317 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 598.317 Section 598.317 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 598.317 United States. The term United States means the United States, its territories and...

31 CFR 596.312 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 596.312 Section 596.312 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 596.312 United States. The term United States means the United States, including its...

31 CFR 538.314 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 538.314 Section 538.314 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 538.314 United States. The term United States means the United States, its territories and possessions...

31 CFR 543.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 543.310 Section 543.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 543.310 United States. The term United States means the United States, its territories and...

31 CFR 594.313 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 594.313 Section 594.313 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 594.313 United States. The term United States means the United States, its territories and...

31 CFR 588.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 588.310 Section 588.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 588.310 United States. The term United States means the United States, its territories and...

31 CFR 536.315 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 536.315 Section 536.315 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 536.315 United States. The term United States means the United States, its territories and...

31 CFR 544.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 544.310 Section 544.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... REGULATIONS General Definitions § 544.310 United States. The term United States means the United States, its...

31 CFR 545.313 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 545.313 Section 545.313 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 545.313 United States. The term United States means the United States, its territories and...

31 CFR 595.314 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 595.314 Section 595.314 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 595.314 United States. The term United States means the United States, its territories and possessions...

31 CFR 560.307 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 560.307 Section 560.307 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 560.307 United States. The term United States means the United States, including its territories and...

31 CFR 593.311 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 593.311 Section 593.311 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... REGULATIONS General Definitions § 593.311 United States. The term United States means the United States, its...

31 CFR 541.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 541.310 Section 541.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 541.310 United States. The term United States means the United States, its territories and possessions...

31 CFR 540.313 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 540.313 Section 540.313 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... REGULATIONS General Definitions § 540.313 United States. The term United States means the United States, its...

Concussion Characteristics in High School Football by Helmet Age/Recondition Status, Manufacturer, and Model: 2008-2009 Through 2012-2013 Academic Years in the United States.

Science.gov (United States)

Collins, Christy L; McKenzie, Lara B; Ferketich, Amy K; Andridge, Rebecca; Xiang, Huiyun; Comstock, R Dawn

2016-06-01

Football helmets used by high school athletes in the United States should meet the National Operating Committee on Standards for Athletic Equipment performance standards. Despite differences in interior padding and exterior shells, all football helmets should provide comparable protection against concussions. Yet, debate continues on whether differences in the rates or severity of concussions exist based on helmet age/recondition status, manufacturer, or model. To investigate whether high school football concussion characteristics varied by helmet age/recondition status, manufacturer, and model. Descriptive epidemiological study. High school football concussion and helmet data were collected from academic years 2008-2009 through 2012-2013 as part of the National High School Sports-Related Injury Surveillance Study. The certified athletic trainers of participating schools submitted athlete-exposure (AE) and injury information weekly. Participating schools reported 2900 football concussions during 3,528,790 AEs for an overall rate of 8.2 concussions per 10,000 AEs. Concussion rates significantly increased from 2008-2009 through 2012-2013 overall (P = .006) as well as in competition (P = .027) and practice (P = .023). Characteristics of concussed football players (ie, mean number of symptoms, specific concussion symptoms, symptom resolution time, and time until return to play) were similar among players wearing new helmets when compared with reconditioned helmets. Fewer players wearing an old/not reconditioned helmet had concussion symptoms resolve within 1 day compared with players wearing a new helmet. Despite differences in the manufacturers and models of helmets worn by all high school football players compared with players who sustained a concussion, the mean number of concussion symptoms, specific concussion symptoms, symptom resolution time, and time until return to play were similar for concussions sustained by football players wearing the most common helmet

An analysis of at-home demand for ice cream in the United States.

Science.gov (United States)

Davis, C G; Blayney, D P; Yen, S T; Cooper, J

2009-12-01

Ice cream has been manufactured commercially in the United States since the middle of the 19th century. Ice cream and frozen dessert products comprise an important and relatively stable component of the United States dairy industry. As with many other dairy products, ice cream is differentiated in several dimensions. A censored translog demand system model was employed to analyze purchases of 3 ice cream product categories. The objective of this study was to determine the effect that changes in retail prices and consumer income have on at-home ice cream consumption. The analysis was based on Nielsen 2005 home scan retail data and used marital status, age, race, education, female employment status, and location in the estimations of aggregate demand elasticities. Results revealed that price and consumer income were the main determinants of demand for ice cream products. Calculated own-price elasticities indicated relatively elastic responses by consumers for all categories except for compensated bulk ice cream. All expenditure elasticities were inelastic except for bulk ice cream, and most of the ice cream categories were substitutes. Ongoing efforts to examine consumer demand for these products will assist milk producers, dairy processors and manufacturers, and dairy marketers as they face changing consumer responses to food and diet issues.

The value of group purchasing organizations in the United States.

Science.gov (United States)

Rooney, Curtis

2011-01-01

This article examines the valuable role of group purchasing organizations (GPOs) in hospital purchasing in the United States. For over 100 years old GPOs have helped hospitals and other health care providers realize savings and create contracting efficiencies by aggregating purchasing volume to negotiate discounts with manufacturers, distributors and other vendors. The US has recently enacted a series of healthcare reforms to correct some of the historical concerns regarding cost, quality and access. GPOs are expected to continue to play a critical role in the business of hospital purchasing and may potential export that other countries may wish to examine.

7 CFR 1206.23 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1206.23 Section 1206.23 Agriculture... INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.23 United States. United... Rico, and the territories and possessions of the United States. ...

Manufacturing fuel-switching capability, 1988

International Nuclear Information System (INIS)

1991-09-01

Historically, about one-third of all energy consumed in the United States has been used by manufacturers. About one-quarter of manufacturing energy is used as feedstocks and raw material inputs that are converted into nonenergy products; the remainder is used for its energy content. During 1988, the most recent year for which data are available, manufacturers consumed 15.5 quadrillion British thermal units (Btu) of energy to produce heat and power and to generate electricity. The manufacturing sector also has widespread capabilities to switch from one fuel to another for either economic or emergency reasons. There are numerous ways to define fuel switching. For the purposes of the Manufacturing Energy Consumption Survey (MECS), fuel switching is defined as the capability to substitute one energy source for another within 30 days with no significant modifications to the fuel-consuming equipment, while keeping production constant. Fuel-switching capability allows manufacturers substantial flexibility in choosing their mix of energy sources. The consumption of a given energy source can be maximized if all possible switching into that energy source takes place. The estimates in this report are based on data collected on the 1988 Manufacturing Energy Consumption Survey (MECS), Forms 846 (A through C). The EIA conducts this national sample survey of manufacturing energy consumption on a triennial basis. The MECS is the only comprehensive source of national-level data on energy-related information for the manufacturing industries. The MECS was first conducted in 1986 to collect data for 1985. This report presents information on the fuel-switching capabilities of manufacturers in 1988. This report is the second of a series based on the 1988 MECS. 8 figs., 31 tabs

Manufacturing fuel-switching capability, 1988

Energy Technology Data Exchange (ETDEWEB)

1991-09-01

Historically, about one-third of all energy consumed in the United States has been used by manufacturers. About one-quarter of manufacturing energy is used as feedstocks and raw material inputs that are converted into nonenergy products; the remainder is used for its energy content. During 1988, the most recent year for which data are available, manufacturers consumed 15.5 quadrillion British thermal units (Btu) of energy to produce heat and power and to generate electricity. The manufacturing sector also has widespread capabilities to switch from one fuel to another for either economic or emergency reasons. There are numerous ways to define fuel switching. For the purposes of the Manufacturing Energy Consumption Survey (MECS), fuel switching is defined as the capability to substitute one energy source for another within 30 days with no significant modifications to the fuel-consuming equipment, while keeping production constant. Fuel-switching capability allows manufacturers substantial flexibility in choosing their mix of energy sources. The consumption of a given energy source can be maximized if all possible switching into that energy source takes place. The estimates in this report are based on data collected on the 1988 Manufacturing Energy Consumption Survey (MECS), Forms 846 (A through C). The EIA conducts this national sample survey of manufacturing energy consumption on a triennial basis. The MECS is the only comprehensive source of national-level data on energy-related information for the manufacturing industries. The MECS was first conducted in 1986 to collect data for 1985. This report presents information on the fuel-switching capabilities of manufacturers in 1988. This report is the second of a series based on the 1988 MECS. 8 figs., 31 tabs.

7 CFR 1215.20 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1215.20 Section 1215.20 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... United States. United States means all of the States. Popcorn Board ...

7 CFR 1280.127 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1280.127 Section 1280.127 Agriculture... INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.127 United States. United States means collectively the 50 States and the District of Columbia. ...

Cask manufacturing methods and quality assurance problems

International Nuclear Information System (INIS)

Riddle, J.H.; Cross, H.D.; Trujillo, A.A.; Pope, R.B.; Rack, H.J.

1980-01-01

This paper presents the results of a study performed to identify and evaluate cask manufacturing methods and materials which are presently or could be readily available in the United States. The study includes a comparison of the economic and technical advantages to be gained from manufacturing casks specifically for application to long-cooled fuel (5 years or greater) and waste materials. The conclusions that have been drawn from this study, which is still in progress are as follows: if spent fuel payloads are in fact cooled for five or more years prior to transportation there is a significant advantage to be gained from cask designs which are tailored to this longer cooling time; the most economic cask design is that which utilizes a lead gamma shield; the all-steel, single wall casks show substantial potential benefits resulting from ready availability and the cost and inspection advantages that result from the design simplicity; the future use of depleted uranium shielded casks in the United States is expected to be low as a result of the high cost and lack of manufacturing facilities; of the three types of neutron absorber systems evluated, the borated cast-in-place silicone rubber shows significant technical and cost advantages; and design and fabrication code requirements and regulatory requirements yet to be developed in the United States are likely to have a profound effect on the next generation of transportation casks

The debate over weight- versus price-based taxation of snuff in the United States' state legislatures.

Science.gov (United States)

Timberlake, David S; Sami, Mojgan; Patel, Sonam; Thiagarajan, Shamili; Badiyan, Ramin; Willard, Shay

2014-08-01

Discount snuff, known for its cheap price, high nicotine content, and popularity among youth, has increased substantially in market share in the United States. As a likely result, the leading manufacturer of premium snuff has supported legislation changing the basis for taxing snuff from price to weight. To determine which public health issues arose in legislative debates, we transcribed 17 of 52 bills from US state legislatures and coded for arguments broadly categorized into public health, fair taxation, tax revenue, tax efficiency, and anti-competitiveness. State legislators expressed frustration that equitable taxation, revenue generation, and prevention of youth tobacco use were frequently conflated in the debates. Public health advocates expressed concerns over youths' incentives to purchase low-weight snuff, but seldom discussed youths' growing preference for discount snuff. The evolving market of moist snuff is a critical consideration for US state legislators as well as policy makers from other countries who may evaluate taxation methods for alternate tobacco products.

7 CFR 1260.108 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1260.108 Section 1260.108 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Promotion and Research Order Definitions § 1260.108 United States. United States means the 50 States and the...

7 CFR 1221.32 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1221.32 Section 1221.32 Agriculture... INFORMATION ORDER Sorghum Promotion, Research, and Information Order Definitions § 1221.32 United States. United States or U.S. means collectively the 50 States, the District of Columbia, the Commonwealth of...

7 CFR 1216.30 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1216.30 Section 1216.30 Agriculture... INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.30 United States. United States means collectively the 50 states, the District of Columbia, the Commonwealth of Puerto Rico...

7 CFR 1218.22 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1218.22 Section 1218.22 Agriculture... INFORMATION ORDER Blueberry Promotion, Research, and Information Order Definitions § 1218.22 United States. United States means collectively the 50 states, the District of Columbia, the Commonwealth of Puerto Rico...

"Their Little Wooden Bricks": A History of the Material Culture of Kindergarten in the United States

Science.gov (United States)

Prochner, Larry

2011-01-01

This article explores the material culture of kindergarten in the United States in relation to the production and consumption of materials and kindergarten theory and pedagogy. The focus is on Friedrich Froebel's building gifts as they were manufactured and sold by the Milton Bradley Company from 1869 to 1939. A review of trade catalogues over the…

AUTOMATION OF ACCOUNTING THE NUMERIC PARTS AND UNITS AT MANUFACTURING ENTERPRISES

Directory of Open Access Journals (Sweden)

E. S. Vasev

2017-01-01

Full Text Available Objectives. The substantiation of the need and disclosure of the substantive and technological features of the design and  development of an information system for the registration of numeric parts and units at a manufacturing enterprise.Methods. Case-technology,object-oriented programming.Results. The development mechanism of an information system for registering numeric parts and units at a manufacturing enterprise is  described. The development process begins with an analysis of the  subject area, wherein the requirements for the information system  are defined. Two business processes related to the activity of the  production preparation engineer are identified and the entities and  types of these attributes are indicated. Using the case-tool  DBdesigner 4, a data scheme is constructed and code is generated for scripts used to create a database in the SQL language. The database is implemented on MySQL. The web-interface of the  information system is designed: website scheme, action sequence  diagram, website logical structure and layout. The resulting data  scheme is implemented within MySQL data base management  system (DBMS and a web-based system interface developed using  object-oriented programming using Notepad ++ text editor. The  web-interface allows a multi-user working mode to be provided with the information system. The separation of basic and summary data among different tabs is performed in order to simplify the work of personnel and minimise the human factor associated with the processing of disparate data. The requirements to be met by the developed information system are defined.All software used in the development process is free.Conclusion. The selection of software tools for the development of a system for accounting of numeric parts and units at a manufacturing enterprise is implemented, allowing the conceptual, logical and physical design of a database – as well as its web  interface – to

7 CFR 1210.315 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1210.315 Section 1210.315 Agriculture... PLAN Watermelon Research and Promotion Plan Definitions § 1210.315 United States. United States means each of the several States and the District of Columbia. [60 FR 10797, Feb. 28, 1995] National...

75 FR 26794 - New United Motor Manufacturing, Inc., Formerly a Joint Venture of General Motors Corporation and...

Science.gov (United States)

2010-05-12

... Manufacturing, Inc., Formerly a Joint Venture of General Motors Corporation and Toyota Motor Corporation... United Motor Manufacturing, Inc., formerly a joint venture of General Motors Corporation and Toyota Motor... reviewed the certification for workers of the subject firm. The workers assemble the Toyota Corolla and the...

United States v. Caronia: The increasing strength of commercial free speech and potential new emphasis on classifying off-label promotion as "false and misleading".

Science.gov (United States)

Scheineson, Marc J; Cuevas, Guillermo

2013-01-01

The authority of the United States Food and Drug Administration (FDA) to prohibit off-label promotion of drug products suffered another serious setback in United States v. Caronia. Viewing a legal system where physicians can prescribe prescription pharmaceuticals for unapproved uses legally in their practice of medicine, the Federal appeals court affirmed the commercial free speech rights of manufacturers to use truthful, non-misleading speech about lawfully marketed products. As a result of this case, and others upon which the decision is based, FDA is likely to challenge manufacturer promotion more carefully, and only if it can demonstrate that claims are not truthful, but are false or misleading, or otherwise deprive the prescriber of adequate directions for use.

Solid state laser applications in photovoltaics manufacturing

Science.gov (United States)

Dunsky, Corey; Colville, Finlay

2008-02-01

Photovoltaic energy conversion devices are on a rapidly accelerating growth path driven by increasing government and societal pressure to use renewable energy as part of an overall strategy to address global warming attributed to greenhouse gas emissions. Initially supported in several countries by generous tax subsidies, solar cell manufacturers are relentlessly pushing the performance/cost ratio of these devices in a quest to reach true cost parity with grid electricity. Clearly this eventual goal will result in further acceleration in the overall market growth. Silicon wafer based solar cells are currently the mainstay of solar end-user installations with a cost up to three times grid electricity. But next-generation technology in the form of thin-film devices promises streamlined, high-volume manufacturing and greatly reduced silicon consumption, resulting in dramatically lower per unit fabrication costs. Notwithstanding the modest conversion efficiency of thin-film devices compared to wafered silicon products (around 6-10% versus 15-20%), this cost reduction is driving existing and start-up solar manufacturers to switch to thin-film production. A key aspect of these devices is patterning large panels to create a monolithic array of series-interconnected cells to form a low current, high voltage module. This patterning is accomplished in three critical scribing processes called P1, P2, and P3. Lasers are the technology of choice for these processes, delivering the desired combination of high throughput and narrow, clean scribes. This paper examines these processes and discusses the optimization of industrial lasers to meet their specific needs.

Toll Facilities in the United States - Toll Facilities in the United States

Data.gov (United States)

Department of Transportation — Biennial report containing selected information on toll facilities in the United States that has been provided to FHWA by the States and/or various toll authorities...

Environmental impact of manufacturing softwood lumber in northeastern and north central United States

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2010-01-01

Finding the environmental impact of building materials is becoming increasingly more important because of public environmental awareness. Accurate and precise life-cycle inventory data on wood products are needed to meet this demand. This study examined softwood lumber manufacturing in the northeastern and north central US using life-cycle inventory methods. Material...

The state of biopharmaceutical manufacturing.

Science.gov (United States)

Molowa, David T; Mazanet, Rosemary

2003-01-01

The manufacturing of protein-based biopharmaceuticals is done in bacterial or mammalian cell cultures. While bacterial cultures are inexpensive, dependable, and approved by regulatory authorities, many complex proteins cannot be manufactured this way. Complex proteins must be manufactured in mammalian cell cultures to produce active products. Mammalian cell culture capacity is limited and has slowed the delivery of necessary biopharmaceutical products to patients. The nature of the production capacity problem and future outlook are critically examined.

Technological assessment of local manufacturers for wind turbine blade manufacturing in Pakistan

Science.gov (United States)

Mahmood, Khurram; Haroon, General

2012-11-01

Composite materials manufacturing industry is one of the world's hi-tech industry. Manufacturing of wind turbine blades is one of the specialized fields requiring high degree of precision and composite manufacturing techniques. This paper identifies the industries specializing in the composite manufacturing and is able to manufacture wind turbines blades in Pakistan. In the second phase, their technology readiness level is determined, based on some factors and then a readiness level are assigned to them. The assigned technology readiness level will depict the absorptive capacity of each manufacturing unit and its capability to take on such projects. The individual readiness level of manufacturing unit will then be used to establish combined technology readiness level of Pakistan particularly for wind turbine blades manufacturing. The composite manufacturing industry provides many spin offs and a diverse range of products can be manufactured using this facility. This research will be helpful to categorize the strong points and flaws of local industry for the gap analysis. It can also be used as a prerequisite study before the evaluation of technologies and specialties to improve the industry of the country for the most favorable results. This will form a basic data base which can be used for the decision making related to transfer of technology, training of local skilled workers and general up-gradation of the local manufacturing units.

Addressing a Yellow Fever Vaccine Shortage - United States, 2016-2017.

Science.gov (United States)

Gershman, Mark D; Angelo, Kristina M; Ritchey, Julian; Greenberg, David P; Muhammad, Riyadh D; Brunette, Gary; Cetron, Martin S; Sotir, Mark J

2017-05-05

Recent manufacturing problems resulted in a shortage of the only U.S.-licensed yellow fever vaccine. This shortage is expected to lead to a complete depletion of yellow fever vaccine available for the immunization of U.S. travelers by mid-2017. CDC, the Food and Drug Administration (FDA), and Sanofi Pasteur are collaborating to ensure a continuous yellow fever vaccine supply in the United States. As part of this collaboration, Sanofi Pasteur submitted an expanded access investigational new drug (eIND) application to FDA in September 2016 to allow for the importation and use of an alternative yellow fever vaccine manufactured by Sanofi Pasteur France, with safety and efficacy comparable to the U.S.-licensed vaccine; the eIND was accepted by FDA in October 2016. The implementation of this eIND protocol included developing a systematic process for selecting a limited number of clinic sites to provide the vaccine. CDC and Sanofi Pasteur will continue to communicate with the public and other stakeholders, and CDC will provide a list of locations that will be administering the replacement vaccine at a later date.

On the Path to SunShot. Emerging Opportunities and Challenges in U.S. Solar Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Chung, Donald [National Renewable Energy Lab. (NREL), Golden, CO (United States); Horowitz, Kelsey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurup, Parthiv [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-05-01

This report provides insights into photovoltaic (PV) and concentrating solar power (CSP) manufacturing in the context of the U.S. Department of Energy's SunShot Initiative. Although global PV price reductions and deployment have been strong recently, PV manufacturing faces challenges. Slowing rates of manufacturing cost reductions, combined with the relatively low price of incumbent electricity generating sources in most large global PV markets, may constrain profit opportunities for firms and poses a potential challenge to the sustainable operation and growth of the global PV manufacturing base. In the United States, manufacturers also face a factors-of-production cost disadvantage compared with competing nations. However, the United States is one of the world's most competitive and innovative countries as well as one of the best locations for PV manufacturing. In conjunction with strong projected PV demand in the United States and across the Americas, these advantages could increase the share of PV technologies produced by U.S. manufacturers as the importance of innovation-driven PV cost reductions increases. Compared with PV, CSP systems are much more complex and require a much larger minimum effective scale, resulting in much higher total CAPEX requirements for system construction, lengthier development cycles, and ultimately higher costs of energy produced. The global lack of consistent CSP project development creates challenges for companies that manufacture specialty CSP components, and the potential lack of a near-term U.S. market could hinder domestic CSP manufacturers. However, global and U.S. CSP deployment is expected to expand beyond 2020, and U.S. CSP manufacturers could benefit from U.S. innovation advantages similar to those associated with PV. Expansion of PV and CSP manufacturing also presents U.S. job-growth opportunities.

Oil Vulnerabilities and United States Strategy

Science.gov (United States)

2007-02-08

Mazda, Mercedes - Benz , Ford, Mercury, and Nissan offer flexible fuel vehicles in the United States. Ethanol is currently produced in the United States...USAWC STRATEGY RESEARCH PROJECT OIL VULNERABILITIES AND UNITED STATES STRATEGY by Colonel Shawn P. Walsh...Colleges and Schools, 3624 Market Street, Philadelphia, PA 19104, (215) 662-5606. The Commission on Higher Education is an institutional accrediting

Means for transferring knowledge in the relocation of manufacturing units

DEFF Research Database (Denmark)

Madsen, Erik Skov; Yang, Cheng; Liangsiri, Jirapha

2008-01-01

) Scenarios on real systems, 3) Prototypes and games, and 4) Emulation. These means are evaluated based on the parameters in the framework and proper means are positioned in the framework. This framework can be used to support learning to develop knowledge in the new manufacturing unit....... on the situations which are extracted from the cases. Two parameters are used to classify the situation: the complexity of knowledge, and the environment for transferring the knowledge. Four different groups of means are identified from the case studies; 1) Documents or manuals and peer-to-peer training, 2...

31 CFR 596.313 - United States person.

Science.gov (United States)

2010-07-01

... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM LIST GOVERNMENTS SANCTIONS REGULATIONS General Definitions § 596.313 United States person. The term United States person means any United States...

Nuclear development in the United States

International Nuclear Information System (INIS)

Brewer, S.

1983-01-01

The history of the nuclear development in the United States has been one of international cooperation relations so far. The United States is to offer the technical information on atomic energy utilization to foreign countries in exchange for the guarantee that they never attempt to have or develop nuclear weapons. Actually, the United States has supplied the technologies on nuclear fuel cycle and other related fields to enable other countries to achieve economical and social progress. The Department of Energy clarified the public promise of the United States regarding the idea of international energy community. The ratio of nuclear power generation to total electric power supply in the United States exceeded 12%, and will exceed 20% by 1990. Since 1978, new nuclear power station has not been ordered, and some of the contracted power stations were canceled. The atomic energy industry in the United States prospered at the beginning of 1970s, but lost the spirit now, mainly due to the institutional problems rather than the technical ones. As the policy of the government to eliminate the obstacles, the improvement of the procedure for the permission and approval, the establishment of waste disposal capability, the verification of fast breeder reactor technology and the promotion of commercial fuel reprocessing were proposed. The re-establishment of the United States as the reliable supplier of atomic energy service is the final aim. (Kako, I.)

78 FR 70274 - United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism...

Science.gov (United States)

2013-11-25

... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism Advisory Board AGENCY: International Trade... the schedule and agenda for an open meeting of the United States Travel and Tourism Advisory Board...

78 FR 3398 - United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism...

Science.gov (United States)

2013-01-16

... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism Advisory Board AGENCY: International Trade... the schedule and agenda for an open meeting of the United States Travel and Tourism Advisory Board...

76 FR 70761 - Weather Shield Manufacturing, Inc. Corporate Office, Medford, WI; Notice of Negative...

Science.gov (United States)

2011-11-15

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,673] Weather Shield... Employees of Weather Shield Manufacturing, Inc. v. United States Secretary of Labor (Court No. 10-00299... former workers of Weather Shield Manufacturing, Inc., Corporate Office, Medford, Wisconsin (subject...

Single-use disposable technologies for biopharmaceutical manufacturing.

Science.gov (United States)

Shukla, Abhinav A; Gottschalk, Uwe

2013-03-01

The manufacture of protein biopharmaceuticals is conducted under current good manufacturing practice (cGMP) and involves multiple unit operations for upstream production and downstream purification. Until recently, production facilities relied on the use of relatively inflexible, hard-piped equipment including large stainless steel bioreactors and tanks to hold product intermediates and buffers. However, there is an increasing trend towards the adoption of single-use technologies across the manufacturing process. Technical advances have now made an end-to-end single-use manufacturing facility possible, but several aspects of single-use technology require further improvement and are continually evolving. This article provides a perspective on the current state-of-the-art in single-use technologies and highlights trends that will improve performance and increase the market penetration of disposable manufacturing in the future. Copyright © 2012 Elsevier Ltd. All rights reserved.

19 CFR 7.3 - Duty-free treatment of goods imported from insular possessions of the United States other than...

Science.gov (United States)

2010-04-01

... INSULAR POSSESSIONS AND GUANTANAMO BAY NAVAL STATION § 7.3 Duty-free treatment of goods imported from...) The goods became a new and different article of commerce as a result of production or manufacture... possession or the United States results from the original commercial transaction between the importer and the...

Changing patterns in the use, recycling, and material substitution of mercury in the United States

Science.gov (United States)

Wilburn, David R.

2013-01-01

Environmental concerns have led to numerous regulations that have dramatically decreased the reported production and use of mercury in the United States since the 1980s. Government legislation and subsequent industry actions have led to increased collection of mercury-containing materials and the recovery of mercury through recycling. Mercury emissions have been reduced and effective alternatives to mercury products have been developed for many applications. This study updates and quantifies the changes in demand, supply, use, and material flow for mercury in various sectors in the United States that have taken place since 1996. Nearly all primary mercury produced in the United States is derived as a byproduct of processing of gold and silver ore in Nevada. Since 2001, annual production of mercury from gold and silver mining in Nevada has decreased by 22 percent overall because ore from greater depths containing low grade mercury is recovered, and mercury emissions from this source have decreased by 95 percent as a result of increased regulation and improved collection and suppression technology. The distribution of consumption of mercury in the United States has changed as a result of regulation (elimination of large-scale mercury use in the paint and battery sectors), reduction by consumers (decommissioning of mercury-cell chloralkali manufacturing capacity), and technological advances (improvements in dental, lighting, and wiring sectors). Mercury use in the chloralkali sector, the leading end-use sector in the United States in 1996, has declined by 98 percent from 136 metric tons (t) in 1996 to about 0.3 t in 2010 because of increased processing and recycling efficiencies and plant closures or conversion to other technologies. As plants were closed, mercury recovered from the infrastructure of decommissioned plants has been exported, making the United States a net exporter of mercury, even though no mercury has been produced as the primary product from mines in

United States housing, 2012

Science.gov (United States)

Delton Alderman

2013-01-01

Provides current and historical information on housing market in the United States. Information includes trends for housing permits and starts, housing completions for single and multifamily units, and sales and construction. This report will be updated annually.

75 FR 51851 - Weather Shield Manufacturing, Inc., Corporate Office, Medford, WI; Notice of Revised...

Science.gov (United States)

2010-08-23

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-64,725] Weather Shield... (Department) for further review, Former Employees of Weather Shield Manufacturing, Inc. v. United States, Court No. 09-00377. On December 17, 2008, former workers of Weather Shield Manufacturing, Inc. (subject...

31 CFR 500.520 - Payments from accounts of United States citizens in employ of United States in foreign countries...

Science.gov (United States)

2010-07-01

... States citizens in employ of United States in foreign countries and certain other persons. 500.520..., Authorizations and Statements of Licensing Policy § 500.520 Payments from accounts of United States citizens in employ of United States in foreign countries and certain other persons. (a) Banking institutions within...

31 CFR 515.520 - Payments from accounts of United States citizens in employ of United States in foreign countries...

Science.gov (United States)

2010-07-01

... States citizens in employ of United States in foreign countries and certain other persons. 515.520..., Authorizations, and Statements of Licensing Policy § 515.520 Payments from accounts of United States citizens in employ of United States in foreign countries and certain other persons. (a) Banking institutions within...

On the Path to SunShot - Emerging Opportunities and Challenges in U.S. Solar Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Chung, Donald [National Renewable Energy Lab. (NREL), Golden, CO (United States); Horowitz, Kelsey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurup, Parthiv [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-05-01

Innovation-driven cost and performance improvements, along with strong projected solar demand in the United States and across the Americas, could increase the attractiveness of U.S.-based solar manufacturing (see Chung et al. 2016). Although improvements to standard PV modules have produced deep cost reductions over the past 5 years, the returns on such incremental improvements appear to be diminishing, and more dramatic innovations in module design and manufacturing are required to continue along the path of rapid progress. At the same time, major opportunities exist for innovation to unlock the potential of CSP technologies. This need for innovation could benefit U.S. PV and CSP manufacturers. The United States has been rated one of the world’s most competitive and innovative countries as well as one of the best locations for PV manufacturing. It is a global leader in PV and CSP R&D and patent production, and U.S. PV manufacturers are already pursuing highly differentiated innovations.

TRAINING OF THE STATE PRESIDENT'S UNIT

African Journals Online (AJOL)

The primary function of the State President's Unit is to protect the head of state - not his person as is generally believed, but his authority over the state. Ironically, the ceremonial performances of the State President's Unit lead people to believe that they are only capable of doing drill exer- cises. However, upon investigating.

Competitive Manufacturing: New Strategies for Regional Development.

Science.gov (United States)

Rosenfeld, Stuart A.

In the past, economic development in the rural United States, particularly in the rural South, relied principally on the attractiveness of a low-wage work force to mass-production manufacturing industries. Now however, the viability of the traditional mass-production economy's organizational structure and operating procedures has been eroded by…

Assessment of U.S. Manufacturing Capability for Next-Generation Wind Turbine Drivetrains

Energy Technology Data Exchange (ETDEWEB)

Cotrell, J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Stelhy, T. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-09-01

Robust U.S. wind turbine manufacturing capabilities and supply chains are important for the United States to reduce the cost of electricity generated from wind turbines. These capabilities and supply chains are also critical to the invention and commercialization of new wind turbine technologies while providing high-quality jobs. The development of advanced drivetrain technologies for windturbine applications is advancing the state of the art for drivetrain design by producing higher capacity and operating reliability than conventional drivetrains. Advanced drivetrain technologies such as medium-speed and direct-drive generators, silicon-carbide (SiC) IGBT-based power electronics, and high torque density speed increasers require different manufacturing and supply chaincapabilities that present both risks and opportunities for U.S. wind turbine manufacturers and the wind industry as a whole. The primary objective of this project is to assess how advanced drivetrain technologies and trends will impact U.S. wind turbine manufacturing and its supply chains. The U.S. Department of Energy and other industry participants will use the information from this study toidentify domestic manufacturing gaps, barriers, and opportunities for developing U.S. wind turbine manufacturing capabilities and supply chains for next-generation drivetrain technologies. This report also includes recommendations for prioritizing technology areas for possible investments by public, private, or nonprofit entities that will reduce the cost of wind-generated electricity. Suchinvestments foster opportunities to invent and commercialize new wind turbine technologies, and provide high-quality jobs in the United States.

Uranium procurement in the United States of America

International Nuclear Information System (INIS)

Thomas, D.C.; Krusiewski, S.V.

1983-01-01

The United States Department of Energy conducts surveys of US uranium marketing activity. The results of this year's survey compared with last year's survey indicate that delivery commitments of US uranium producers to US uranium users have decreased in the early part of this decade, but have increased in the latter part of the decade. Unfilled uranium requirements are nearly the same through 1986 in both surveys, but in the 1987-1990 period this years's unfilled requirements are lower than those reported last year. Non-US purchase commitments by US utilities are somewhat greater than those reported last year. Non-US purchase commitments by US reactor manufacturers and producers have increased significantly over the past year; about two-thirds of these purchase commitments resulted from the settlement of litigation with non-US suppliers. The attitude of US utilities as to their use of non-US uranium has remained the same over the past year. Although some of the utilities were uncertain about future non-US uranium purchases, many of them indicated that they would possibly purchase non-US uranium. Natural uranium inventories of US reactor manufacturers and utilities have increased over the past year, and now amount to about 3 years of forward coverage. The enriched uranium inventories held by these users have decreased over the past year, and now amount to less than 1 year's forward coverage. (author)

Fluorescent lamp recycling initiatives in the United States and a recycling proposal based on extended producer responsibility and product stewardship concepts.

Science.gov (United States)

Silveira, Geraldo Tr; Chang, Shoou-Yuh

2011-06-01

This paper presents an overview of mercury-containing lamp (MCL) recycling initiatives currently available in the world, especially in the United States. The majority of MCLs contain mercury which is a neurotoxin, a persistent pollutant in the environment, and can bioaccumulate in the food chain. Although there are some recycling options in the United States, collection rates are still at 23% of all potential used MCLs. This shows that citizens are either indifferent to or unaware of the recycling alternatives. On the other hand, MCL recycling seems not to be a cost-effective process and, for this reason, in the United States, take-back programmes are still sponsored only by consumers or municipalities. A few retailers have recently initiated limited take-back alternatives and manufacturers have not yet supported financially any consistent recycling alternative in the country. Considering successful experiences, this paper makes a suggestion for an MCL recycling system based on the concepts of extended producer responsibility and product stewardship. A manufacturer-importer advance recycling fee is proposed to finance the collection and recycling system while a MCL-energy recycling fee supported by the energy sector creates a lamp refund process. 'PRO Lamp', a producer responsibility organization, will manage the entire system through a widespread public-private agreement.

The current acceptance, accessibility and recognition of Chinese and Ayurvedic medicine in the United States in the public, governmental, and industrial sectors.

Science.gov (United States)

Park, Jongbae J; Beckman-Harned, Selena; Cho, Gayoung; Kim, Duckhee; Kim, Hangon

2012-06-01

To assess the current level of acceptance in the United States of complementary and alternative medicine, recent research into the prevalence, acceptance, accessibility, and recognition of complementary and alternative therapies were reviewed. Several signs point to an increasing acceptance of complementary and alternative medicine in the United States; the use of complementary and alternative medicine is significantly increasing, many aspects of Chinese medicine and Ayurveda are becoming mainstream, practitioners in the United States are beginning to be licensed, and insurance companies are beginning to cover some complementary and alternative therapies. Remaining challenges to true acceptance include the restrictive Western mindset, the absence of published studies, a lack of consistent manufacturing processes and quality standards, and a fear of adulteration. Although the field still faces many challenges, alternative and complementary medicine, including Chinese medicine and Ayurvedic medicine, is becoming more accepted and accessible in the United States.

Research on Dynamic Facility Layout Problem of Manufacturing Unit Considering Human Factors

Directory of Open Access Journals (Sweden)

Jinying Li

2018-01-01

Full Text Available As many said, industry 4.0 is an epoch-making revolution which brought the manufacturing market much faster changes and severer competitions. As an important part of the manufacturing system, facility layout has direct impact on business benefit; at the same time, despite the intelligent factory, intelligent production has its own characteristics. However, there is one point on which industry and academia have basically formed a consensus: it is not true that industry 4.0 does not need human beings; on the contrary, human initiative plays an unabated role in the development of industry 4.0. This paper will focus on the dynamic facility layout of the manufacturing unit. Based on the system above and the traditional optimization model, a mathematic model is built to find the best solution combining safety, sustainability, high efficiency, and low cost. And penalty function with adaptive penalty factor and advanced artificial bee colony algorithm is used to solve the constrained model. In the end, by studying few cases, the model is proved to be effective in both efficiency improvement and the implementation of safe and comfort human-machine interaction.

The Plight of Manufacturing: What Can Be Done?

Science.gov (United States)

Cyert, Richard M.

1985-01-01

Proposes that full automation is the best current option for the United States' manufacturing industries. Advocates increased use of electronics, robotics, and computers in the establishment of unmanned factories. Implications of this movement are examined in terms of labor, management, and the structure of the economy. (ML)

"Build That Wall!": Manufacturing the Enemy, yet Again

Science.gov (United States)

Santamaría Graff, Cristina C.

2017-01-01

The 2016 presidential campaign and the election of Donald Trump has amplified divisive anti-immigrant sentiment and has further positioned "Mexicans as enemy." Trump's "Build That Wall!" declarative has stoked nativist ire through manufactured narratives that rarely, if ever, consider the United States government's role in the…

31 CFR 515.334 - United States national.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States national. 515.334 Section 515.334 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... of the United States, and which has its principal place of business in the United States. [61 FR...

7 CFR 1212.32 - United States Customs Service.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States Customs Service. 1212.32 Section 1212... § 1212.32 United States Customs Service. “United States Customs Service” or “Customs” means the United States Customs and Border Protection, an agency of the Department of Homeland Security. Honey Packers and...

The Current State of Additive Manufacturing in Wind Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Mann, Margaret [National Renewable Energy Lab. (NREL), Golden, CO (United States); Palmer, Sierra [Worcester Polytechnic Institute (WPI), , Worcester, MA (United States); Lee, Dominic [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurup, Parthiv [National Renewable Energy Lab. (NREL), Golden, CO (United States); Remo, Timothy [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jenne, Dale Scott [National Renewable Energy Lab. (NREL), Golden, CO (United States); Richardson, Bradley S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-12-01

Wind power is an inexhaustible form of energy that is being captured throughout the U.S. to power the engine of our economy. A robust, domestic wind industry promises to increase U.S. industry growth and competitiveness, strengthen U.S. energy security independence, and promote domestic manufacturing nationwide. As of 2016, ~82GW of wind capacity had been installed, and wind power now provides more than 5.5% of the nation’s electricity and supports more than 100,000 domestic jobs, including 500 manufacturing facilities in 43 States. To reach the U.S. Department of Energy’s (DOE’s) 2015 Wind Vision study scenario of wind power serving 35% of the nation's end-use demand by 2050, significant advances are necessary in all areas of wind technologies and market. An area that can greatly impact the cost and rate of innovation in wind technologies is the use of advanced manufacturing, with one of the most promising areas being additive manufacturing (AM). Considering the tremendous promise offered by advanced manufacturing, it is the purpose of this report to identify the use of AM in the production and operation of wind energy systems. The report has been produced as a collaborative effort for the DOE Wind Energy Technology Office (WETO), between Oak Ridge National Laboratory (ORNL) and the National Renewable Energy Laboratory (NREL).

Biodiversity of indigenous staphylococci of naturally fermented dry sausages and manufacturing environments of small-scale processing units.

Science.gov (United States)

Leroy, Sabine; Giammarinaro, Philippe; Chacornac, Jean-Paul; Lebert, Isabelle; Talon, Régine

2010-04-01

The staphylococcal community of the environments of nine French small-scale processing units and their naturally fermented meat products was identified by analyzing 676 isolates. Fifteen species were accurately identified using validated molecular methods. The three prevalent species were Staphylococcus equorum (58.4%), Staphylococcus saprophyticus (15.7%) and Staphylococcus xylosus (9.3%). S. equorum was isolated in all the processing units in similar proportion in meat and environmental samples. S. saprophyticus was also isolated in all the processing units with a higher percentage in environmental samples. S. xylosus was present sporadically in the processing units and its prevalence was higher in meat samples. The genetic diversity of the strains within the three species isolated from one processing unit was studied by PFGE and revealed a high diversity for S. equorum and S. saprophyticus both in the environment and the meat isolates. The genetic diversity remained high through the manufacturing steps. A small percentage of the strains of the two species share the two ecological niches. These results highlight that some strains, probably introduced by the meat, will persist in the manufacturing environment, while other strains are more adapted to the meat products.

Access to benznidazole for Chagas disease in the United States-Cautious optimism?

Directory of Open Access Journals (Sweden)

Jonathan D Alpern

2017-09-01

Full Text Available Drugs for neglected tropical diseases (NTD are being excessively priced in the United States. Benznidazole, the first-line drug for Chagas disease, may become approved by the Food and Drug Administration (FDA and manufactured by a private company in the US, thus placing it at risk of similar pricing. Chagas disease is an NTD caused by Trypanosoma cruzi; it is endemic to Latin America, infecting 8 million individuals. Human migration has changed the epidemiology causing nonendemic countries to face increased challenges in diagnosing and managing patients with Chagas disease. Only 2 drugs exist with proven efficacy: benznidazole and nifurtimox. Benznidazole has historically faced supply problems and drug shortages, limiting accessibility. In the US, it is currently only available under an investigational new drug (IND protocol from the CDC and is provided free of charge to patients. However, 2 companies have stated that they intend to submit a New Drug Application (NDA for FDA approval. Based on recent history of companies acquiring licensing rights for NTD drugs in the US with limited availability, it is likely that benznidazole will become excessively priced by the manufacturer-paradoxically making it less accessible. However, if the companies can be taken at their word, there may be reason for optimism.

Access to benznidazole for Chagas disease in the United States-Cautious optimism?

Science.gov (United States)

Alpern, Jonathan D; Lopez-Velez, Rogelio; Stauffer, William M

2017-09-01

Drugs for neglected tropical diseases (NTD) are being excessively priced in the United States. Benznidazole, the first-line drug for Chagas disease, may become approved by the Food and Drug Administration (FDA) and manufactured by a private company in the US, thus placing it at risk of similar pricing. Chagas disease is an NTD caused by Trypanosoma cruzi; it is endemic to Latin America, infecting 8 million individuals. Human migration has changed the epidemiology causing nonendemic countries to face increased challenges in diagnosing and managing patients with Chagas disease. Only 2 drugs exist with proven efficacy: benznidazole and nifurtimox. Benznidazole has historically faced supply problems and drug shortages, limiting accessibility. In the US, it is currently only available under an investigational new drug (IND) protocol from the CDC and is provided free of charge to patients. However, 2 companies have stated that they intend to submit a New Drug Application (NDA) for FDA approval. Based on recent history of companies acquiring licensing rights for NTD drugs in the US with limited availability, it is likely that benznidazole will become excessively priced by the manufacturer-paradoxically making it less accessible. However, if the companies can be taken at their word, there may be reason for optimism.

Tobacco Advertising and Promotional Expenditures in Sports and Sporting Events - United States, 1992-2013.

Science.gov (United States)

Agaku, Israel T; Odani, Satomi; Sturgis, Stephanie; Harless, Charles; Glover-Kudon, Rebecca

2016-08-19

Smokeless tobacco has been actively promoted by tobacco companies using endorsements by major sport figures, and research indicates that tobacco advertising can lead to youth initiation of tobacco use (1,2). Television and radio advertisements for cigarettes and smokeless tobacco have been prohibited since 1969,* and the 1998 Master Settlement Agreement(†) further prohibited tobacco companies from targeting youths with tobacco product advertisements in specified areas. In 2010, the Food and Drug Administration (FDA), under authority of the 2009 Family Smoking Prevention and Tobacco Control Act (FSPTCA), prohibited tobacco-brand sponsorship (i.e., sponsorship of sports and entertainment events or other social or cultural events using the tobacco brand name or anything identifiable with any brand of cigarettes or smokeless tobacco).(§) However, corporate-name tobacco sponsorship (i.e., sponsorship using the name of the corporation that manufactures regulated tobacco products) is still permitted under certain conditions.(¶) To monitor tobacco advertising and promotional activities in sports in the United States, CDC analyzed trends in sports-related marketing expenditures for cigarettes and smokeless tobacco during 1992-2013 using data from the Federal Trade Commission (FTC). During 1992-2013, sports-related marketing expenditures, adjusted by the consumer price index to constant 2013 dollars, decreased significantly for both cigarettes (from $136 million in 1992 to $0 in 2013) and smokeless tobacco (from $34.8 million in 1992 to $2.1 million in 2013). During 2010-2013, after the prohibition of tobacco-brand sponsorship in sports under the FSPTCA, cigarette manufacturers reported no spending (i.e., $0) on sports-related advertising and promotional activities; in contrast, smokeless tobacco manufacturers reported expenditures of $16.3 million on advertising and promoting smokeless tobacco in sports during 2010-2013. These findings indicate that despite prohibitions

Poison politics: a contentious history of consumer protection against dangerous household chemicals in the United States.

Science.gov (United States)

Jones, Marian Moser; Benrubi, Isidore Daniel

2013-05-01

The history of consumer protection against household poisons presents a key case study of the uniquely American struggle to balance public health and safety with the interests of business. By the late 19th century, package designs, warning labels, and state statutes had formed an uneven patchwork of protective mechanisms against accidental poisonings. As household chemicals proliferated in the early 20th century, physicians concerned with childhood poisonings pressured the federal government to enact legislation mandating warning labels on packaging for these substances. Manufacturers of household chemicals agreed to labeling requirements for caustic poisons but resisted broader regulation. Accidental poisonings of children continued to increase until the enactment of broad labeling and packaging legislation in the 1960s and 1970s. This history suggests that voluntary agreements between government agencies and manufacturers are inadequate to protect consumers against household poisonings and that, in the United States, protective household chemical regulation proceeds in a reactive rather than a precautionary manner.

Nuclear power in the United States

International Nuclear Information System (INIS)

Johnston, J.B.

1985-01-01

All over the world except in the United States, nuclear energy is a low cost, secure, environmentally acceptable form of energy. In the United States, civilian nuclear power is dead. 112 nuclear power plants have been abandoned or cancelled in the last decade, and there has been no new order for nuclear plants since 1978. It will be fortunate to have 125 operating nuclear plants in the United States in the year 2000. There are almost 90 completed nuclear power plants and about 45 under construction in the United States, but several of those under construction will eventually be abandoned. About 20 % of the electricity in the United States will be generated by nuclear plants in 2000 as compared with 13 % supplied in the last year. Under the present regulatory and institutional arrangement, American electric utilities would not consider to order a new nuclear power plant. Post-TMI nuclear plants became very expensive, and there is also ideological opposition to nuclear power. Coal-firing plants are also in the similar situation. The uncertainty about electric power demand, the cost of money, the inflation of construction cost and regulation caused the situation. (Kako, I.)

Allergen manufacturing and quality aspects for allergen immunotherapy in Europe and the United States: An analysis from the EAACI AIT Guidelines Project.

Science.gov (United States)

Bonertz, A; Roberts, G; Slater, J E; Bridgewater, J; Rabin, R L; Hoefnagel, M; Timon, M; Pini, C; Pfaar, O; Sheikh, A; Ryan, D; Akdis, C; Goldstein, J; Poulsen, L K; van Ree, R; Rhyner, C; Barber, D; Palomares, O; Pawankar, R; Hamerlijnk, D; Klimek, L; Agache, I; Angier, E; Casale, T; Fernandez-Rivas, M; Halken, S; Jutel, M; Lau, S; Pajno, G; Sturm, G; Varga, E M; Gerth van Wijk, R; Bonini, S; Muraro, A; Vieths, S

2018-04-01

Adequate quality is essential for any medicinal product to be eligible for marketing. Quality includes verification of the identity, content and purity of a medicinal product in combination with a specified production process and its control. Allergen products derived from natural sources require particular considerations to ensure adequate quality. Here, we describe key aspects of the documentation on manufacturing and quality aspects for allergen immunotherapy products in the European Union and the United States. In some key parts, requirements in these areas are harmonized while other fields are regulated separately between both regions. Essential differences are found in the use of Reference Preparations, or the requirement to apply standardized assays for potency determination. As the types of products available are different in specific regions, regulatory guidance for such products may also be available in one specific region only, such as for allergoids in the European Union. Region-specific issues and priorities are a result of this. As allergen products derived from natural sources are inherently variable in their qualitative and quantitative composition, these products present special challenges to balance the variability and ensuring batch-to-batch consistency. Advancements in scientific knowledge on specific allergens and their role in allergic disease will consequentially find representation in future regulatory guidelines. © 2017 EAACI and John Wiley and Sons A/S. Published by John Wiley and Sons Ltd.

Teen Pregnancy in the United States

Science.gov (United States)

... United States: the contribution of abstinence and improved contraceptive use. Am J Public Health. 2007;97(1):150-6. Lindberg LD, Santelli JS, Desai, S. Understanding the Decline in Adolescent Fertility in the United States, 2007–2012. J ...

State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies

DEFF Research Database (Denmark)

Hofstätter, Thomas; Pedersen, David Bue; Tosello, Guido

2017-01-01

Additive manufacturing technologies have received a lot of attention in recent years for their use in multiple materials such as metals, ceramics, and polymers. The aim of this review article is to analyze the technology of fiber-reinforced polymers and its implementation with additive...... manufacturing. This article reviews recent developments, ideas, and state-of-the-art technologies in this field. Moreover, it gives an overview of the materials currently available for fiber-reinforced material technology....

A comparison of the nuclear options for greenhouse gas mitigation in China and in the United States

Energy Technology Data Exchange (ETDEWEB)

Yang, Chi-Jen, E-mail: cj.y@duke.edu [Center on Global Change, Box 90658, Duke University, Durham, NC 27708 (United States)

2011-06-15

China is quickly building up its nuclear power capacity while the hailed nuclear renaissance in the United States has been largely stagnant. The political and industrial structures explain the divergent paths. This paper draws lessons from the French experiences in deploying nuclear power and uses the lessons in comparing Chinese and U.S. policies. An authoritative political system and state-owned utility industry allow China to emulate the French approaches such as government-backed financing and broad-scale deployment with standardized design. The democratic political system and fragmented utility industry, and the laissez-faire ideology in the United States, on the other hand, are unfavorable to a nuclear renaissance. The prospect of a nuclear revival in the United States remains highly uncertain. As China builds up its nuclear industry, it will be able to reduce carbon emissions without a carbon price through a national plan to deploy low-carbon nuclear electricity, while the United States cannot implement a climate policy without a carbon price. American politicians should stop using China's lack of carbon cap as an excuse for postponing the legislation of a carbon price. - Highlights: > The Chinese government and Chinese state-owned companies are indigenizing nuclear power technologies, establishing nuclear manufacturing capacity, and gradually scaling up nuclear power deployment. > China is likely on a path to the biggest nuclear buildup in human history. > The hailed nuclear renaissance in the United States has been largely stagnant. > The underlying causes of U.S. Nuclear stagnation is rooted in the democratic political system and fragmented utility industry, and the laissez-faire ideology, which are unlikely to change in the foreseeable future. > China can move toward a low-carbon electricity system without a carbon price. The United States needs a carbon price to implement a climate policy.

A comparison of the nuclear options for greenhouse gas mitigation in China and in the United States

International Nuclear Information System (INIS)

Yang, Chi-Jen

2011-01-01

China is quickly building up its nuclear power capacity while the hailed nuclear renaissance in the United States has been largely stagnant. The political and industrial structures explain the divergent paths. This paper draws lessons from the French experiences in deploying nuclear power and uses the lessons in comparing Chinese and U.S. policies. An authoritative political system and state-owned utility industry allow China to emulate the French approaches such as government-backed financing and broad-scale deployment with standardized design. The democratic political system and fragmented utility industry, and the laissez-faire ideology in the United States, on the other hand, are unfavorable to a nuclear renaissance. The prospect of a nuclear revival in the United States remains highly uncertain. As China builds up its nuclear industry, it will be able to reduce carbon emissions without a carbon price through a national plan to deploy low-carbon nuclear electricity, while the United States cannot implement a climate policy without a carbon price. American politicians should stop using China's lack of carbon cap as an excuse for postponing the legislation of a carbon price. - Highlights: → The Chinese government and Chinese state-owned companies are indigenizing nuclear power technologies, establishing nuclear manufacturing capacity, and gradually scaling up nuclear power deployment. → China is likely on a path to the biggest nuclear buildup in human history. → The hailed nuclear renaissance in the United States has been largely stagnant. → The underlying causes of U.S. Nuclear stagnation is rooted in the democratic political system and fragmented utility industry, and the laissez-faire ideology, which are unlikely to change in the foreseeable future. → China can move toward a low-carbon electricity system without a carbon price. The United States needs a carbon price to implement a climate policy.

Comparing Generic Drug Markets in Europe and the United States: Prices, Volumes, and Spending.

Science.gov (United States)

Wouters, Olivier J; Kanavos, Panos G; McKEE, Martin

2017-09-01

Policy Points: Our study indicates that there are opportunities for cost savings in generic drug markets in Europe and the United States. Regulators should make it easier for generic drugs to reach the market. Regulators and payers should apply measures to stimulate price competition among generic drugmakers and to increase generic drug use. To meaningfully evaluate policy options, it is important to analyze historical context and understand why similar initiatives failed previously. Rising drug prices are putting pressure on health care budgets. Policymakers are assessing how they can save money through generic drugs. We compared generic drug prices and market shares in 13 European countries, using data from 2013, to assess the amount of variation that exists between countries. To place these results in context, we reviewed evidence from recent studies on the prices and use of generics in Europe and the United States. We also surveyed peer-reviewed studies, gray literature, and books published since 2000 to (1) outline existing generic drug policies in European countries and the United States; (2) identify ways to increase generic drug use and to promote price competition among generic drug companies; and (3) explore barriers to implementing reform of generic drug policies, using a historical example from the United States as a case study. The prices and market shares of generics vary widely across Europe. For example, prices charged by manufacturers in Switzerland are, on average, more than 2.5 times those in Germany and more than 6 times those in the United Kingdom, based on the results of a commonly used price index. The proportion of prescriptions filled with generics ranges from 17% in Switzerland to 83% in the United Kingdom. By comparison, the United States has historically had low generic drug prices and high rates of generic drug use (84% in 2013), but has in recent years experienced sharp price increases for some off-patent products. There are policy

Immigration Enforcement Within the United States

Science.gov (United States)

2006-04-06

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Policy Issues...Remained in the United States, (Washington: Center for Immigration Studies, May 2002). Immigration Enforcement Within the United States Introduction ...interior enforcement lack a border component. For example, fugitive taskforces, investigations of alien slavery and sweatshops , and employer sanctions do

An Interoperability Framework and Capability Profiling for Manufacturing Software

Science.gov (United States)

Matsuda, M.; Arai, E.; Nakano, N.; Wakai, H.; Takeda, H.; Takata, M.; Sasaki, H.

ISO/TC184/SC5/WG4 is working on ISO16100: Manufacturing software capability profiling for interoperability. This paper reports on a manufacturing software interoperability framework and a capability profiling methodology which were proposed and developed through this international standardization activity. Within the context of manufacturing application, a manufacturing software unit is considered to be capable of performing a specific set of function defined by a manufacturing software system architecture. A manufacturing software interoperability framework consists of a set of elements and rules for describing the capability of software units to support the requirements of a manufacturing application. The capability profiling methodology makes use of the domain-specific attributes and methods associated with each specific software unit to describe capability profiles in terms of unit name, manufacturing functions, and other needed class properties. In this methodology, manufacturing software requirements are expressed in terns of software unit capability profiles.

State-of-the-Art Multi-Objective Optimisation of Manufacturing Processes Based on Thermo-Mechanical Simulations

DEFF Research Database (Denmark)

Tutum, Cem Celal; Hattel, Jesper Henri

2011-01-01

During the last couple of decades the possibility of modelling multi-physics phenomena has increased dramatically, thus making simulation of very complex manufacturing processes possible and in some fields even an everyday event. A consequence of this has been improved products with respect...... competition between manufacturers of products in combination with the possibility of doing these highly complex simulations. Thus, there is a crucial need for combining advanced simulation tools for manufacturing processes with systematic optimisation algorithms which are capable of searching for single....... These limitations eventually determine what is in fact possible today and hence define what the “state-of-the-art” is. So, seen from that perspective the very definition of the state-of-the-art itself in the field of optimisation of manufacturing processes constitutes an important discussion. Moreover, in the major...

High-Resolution Water Footprints of Production of the United States

Science.gov (United States)

Marston, Landon; Ao, Yufei; Konar, Megan; Mekonnen, Mesfin M.; Hoekstra, Arjen Y.

2018-03-01

The United States is the largest producer of goods and services in the world. Rainfall, surface water supplies, and groundwater aquifers represent a fundamental input to economic production. Despite the importance of water resources to economic activity, we do not have consistent information on water use for specific locations and economic sectors. A national, spatially detailed database of water use by sector would provide insight into U.S. utilization and dependence on water resources for economic production. To this end, we calculate the water footprint of over 500 food, energy, mining, services, and manufacturing industries and goods produced in the United States. To do this, we employ a data intensive approach that integrates water footprint and input-output techniques into a novel methodological framework. This approach enables us to present the most detailed and comprehensive water footprint analysis of any country to date. This study broadly contributes to our understanding of water in the U.S. economy, enables supply chain managers to assess direct and indirect water dependencies, and provides opportunities to reduce water use through benchmarking. In fact, we find that 94% of U.S. industries could reduce their total water footprint more by sourcing from more water-efficient suppliers in their supply chain than they could by converting their own operations to be more water-efficient.

United States advanced technologies

International Nuclear Information System (INIS)

Longenecker, J.R.

1985-01-01

In the United States, the advanced technologies have been applied to uranium enrichment as a means by which it can be assured that nuclear fuel cost will remain competitive in the future. The United States is strongly committed to the development of advanced enrichment technology, and has brought both advanced gas centrifuge (AGC) and atomic vapor laser isotope separation (AVLIS) programs to a point of significant technical refinement. The ability to deploy advanced technologies is the basis for the confidence in competitive future price. Unfortunately, the development of advanced technologies is capital intensive. The year 1985 is the key year for advanced technology development in the United States, since the decision on the primary enrichment technology for the future, AGC or AVLIS, will be made shortly. The background on the technology selection process, the highlights of AGC and AVLIS programs and the way to proceed after the process selection are described. The key objective is to maximize the sales volume and minimize the operating cost. This will help the utilities in other countries supply low cost energy on a reliable, long term basis. (Kako, I.)

Life Cycle Assessment of concrete manufacturing in small isolated states: the case of Cyprus

Science.gov (United States)

Chrysostomou, Chrystalla; Kylili, Angeliki; Nicolaides, Demetris; Fokaides, Paris A.

2017-10-01

Life Cycle Assessment (LCA) is an effective and valuable methodology for identifying the holistic sustainable behaviour of materials and products. It is also useful in analysing the impact a structure has over the course of its life cycle. Currently, there is no sufficient knowhow regarding the life cycle performance of building materials used in the case of small isolated states. This study focuses on the LCA of the production of concrete for the investigation of its environmental impact in isolated island states, using the case of Cyprus as an example. Four different scenarios for the production of 1 tonne of concrete are examined: (i) manufacturing of concrete by transporting raw materials from different locations around the island, (ii) manufacturing of concrete using alternative energy resources, (iii) manufacturing of concrete with reduced transportation needs, and (iv) on-site manufacturing of concrete. The results, in terms of environmental impacts of concrete produced, indicated that the use of renewable electricity instead of fossil-fuelled electricity in isolated states can drastically improve the environmental performance of the end product. Also, the minimisation of transportation distances and the use of locally available resources can also affect, to a degree, the environmental impact of concrete production.

Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 2: case studies

DEFF Research Database (Denmark)

Kellens, Karel; Dewulf, Wim; Overcash, Michael

2012-01-01

industrial data and engineering calculations for energy use and material loss. This approach is illustrated by means of a case study of a drilling process.The in-depth approach, which leads to more accurate LCI data as well as the identification of potential for environmental improvements...... for environmental improvement based on the in-depth analysis of individual manufacturing unit processes. Two case studies illustrate the applicability of the methodology.......This report presents two case studies, one for both the screening approach and the in-depth approach, demonstrating the application of the life cycle assessment-oriented methodology for systematic inventory analysis of the machine tool use phase of manufacturing unit processes, which has been...

2000 survey of window manufacturers on the subject of switchable glass

Science.gov (United States)

LaPointe, Michael R.; Sottile, Gregory M.

2001-11-01

The results of a 2000 survey of United States window manufacturers on the subject of switchable glass are discussed. The areas covered in this paper include awareness of the overall product category of switchable glass and various types of switchable glass, attitudes toward specific features of switchable glass, expectations for manufacturer production of such products, expectations for market penetration rates among end-product consumers, levels of price sensitivity among window manufacturers regarding switchable glass, and expectations for the pace of new product development within the window industry over the next five years.

Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell.

Science.gov (United States)

Kadkhodapour, J; Montazerian, H; Darabi, A Ch; Anaraki, A P; Ahmadi, S M; Zadpoor, A A; Schmauder, S

2015-10-01

Since the advent of additive manufacturing techniques, regular porous biomaterials have emerged as promising candidates for tissue engineering scaffolds owing to their controllable pore architecture and feasibility in producing scaffolds from a variety of biomaterials. The architecture of scaffolds could be designed to achieve similar mechanical properties as in the host bone tissue, thereby avoiding issues such as stress shielding in bone replacement procedure. In this paper, the deformation and failure mechanisms of porous titanium (Ti6Al4V) biomaterials manufactured by selective laser melting from two different types of repeating unit cells, namely cubic and diamond lattice structures, with four different porosities are studied. The mechanical behavior of the above-mentioned porous biomaterials was studied using finite element models. The computational results were compared with the experimental findings from a previous study of ours. The Johnson-Cook plasticity and damage model was implemented in the finite element models to simulate the failure of the additively manufactured scaffolds under compression. The computationally predicted stress-strain curves were compared with the experimental ones. The computational models incorporating the Johnson-Cook damage model could predict the plateau stress and maximum stress at the first peak with less than 18% error. Moreover, the computationally predicted deformation modes were in good agreement with the results of scaling law analysis. A layer-by-layer failure mechanism was found for the stretch-dominated structures, i.e. structures made from the cubic unit cell, while the failure of the bending-dominated structures, i.e. structures made from the diamond unit cells, was accompanied by the shearing bands of 45°. Copyright © 2015 Elsevier Ltd. All rights reserved.

Additive manufacturing of titanium alloys state of the art, challenges and opportunities

CERN Document Server

Dutta, Bhaskar

2016-01-01

Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the un...

The United States and the Arab Gulf Monarchies

International Nuclear Information System (INIS)

Kechichian, J.A.

1999-01-01

The United States has enduring strategic interests in the Persian Gulf region. To understand these interests and the Usa policy towards the Arab Gulf Monarchies, the french institute of international relations (IFRI) proposes this document. The following chapters are detailed: the United States and the Arab Gulf Monarchies, overview, Chief Unites States Objective: Access to oil, re-evaluating United States Foreign Policy in the Gulf, the second term (Usa strategy). (A.L.B.)

Unit cell-based computer-aided manufacturing system for tissue engineering

International Nuclear Information System (INIS)

Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

2012-01-01

Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering. (paper)

Unit cell-based computer-aided manufacturing system for tissue engineering.

Science.gov (United States)

Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

2012-03-01

Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering.

Ergonomic implementation and work station design for quilt manufacturing unit.

Science.gov (United States)

Vinay, Deepa; Kwatra, Seema; Sharma, Suneeta; Kaur, Nirmal

2012-05-01

Awkward, extreme and repetitive postures have been associated with work related musculoskeletal disorders and injury to the lowerback of workers engaged in quilting manufacturing unit. Basically quilt are made manually by hand stitch and embroidery on the quilts which was done in squatting posture on the floor. Mending, stain removal, washing and packaging were some other associated work performed on wooden table. their work demands to maintain a continuous squatting posture which leads to various injuries related to low back and to calf muscles. The present study was undertaken in Tarai Agroclimatic Zone of Udham Singh Nagar District of Uttarakhand State with the objective to study the physical and physiological parameters as well as the work station layout of the respondent engaged on quilt manufacturing unit. A total of 30 subjects were selected to study the drudgery involved in quilt making enterprise and to make the provision of technology option to reduce the drudgery as well as musculoskeletal disorders, thus enhancing the productivity and comfortability. Findings of the investigation show that majority of workers (93.33 per cent) were female and very few (6.66 per cent) were the male with the mean age of 24.53±6.43. The body mass index and aerobic capacity (lit/min) values were found as 21.40±4.13 and 26.02±6.44 respectively. Forty per cent of the respondents were having the physical fitness index of high average whereas 33.33 per cent of the respondents had low average physical fitness. All the assessed activities involved to make the quilt included a number of the steps which were executed using two types of work station i.e squatting posture on floor and standing posture using wooden table. A comparative study of physiological parameters was also done in the existing conditions as well as in improved conditions by introducing low height chair and wooden spreader to hold the load of quilt while working, to improve the work posture of the worker. The

78 FR 46686 - Privacy Act of 1974; Treasury/United States Mint .013-United States Mint National Electronic...

Science.gov (United States)

2013-08-01

... available publicly. FOR FURTHER INFORMATION CONTACT: For general questions and privacy issues, please... DEPARTMENT OF THE TREASURY Privacy Act of 1974; Treasury/United States Mint .013--United States... Privacy Act of 1974, as amended, 5 U.S.C. 552a, the Department of the Treasury (``Treasury'') and the...

A Manufacturing Cost and Supply Chain Analysis of SiC Power Electronics Applicable to Medium-Voltage Motor Drives

Energy Technology Data Exchange (ETDEWEB)

Horowitz, Kelsey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Remo, Timothy [National Renewable Energy Lab. (NREL), Golden, CO (United States); Reese, Samantha [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-03-24

Wide bandgap (WBG) semiconductor devices are increasingly being considered for use in certain power electronics applications, where they can improve efficiency, performance, footprint, and, potentially, total system cost compared to systems using traditional silicon (Si) devices. Silicon carbide (SiC) devices in particular -- which are currently more mature than other WBG devices -- are poised for growth in the coming years. Today, the manufacturing of SiC wafers is concentrated in the United States, and chip production is split roughly equally between the United States, Japan, and Europe. Established contract manufacturers located throughout Asia typically carry out manufacturing of WBG power modules. We seek to understand how global manufacturing of SiC components may evolve over time by illustrating the regional cost drivers along the supply chain and providing an overview of other factors that influence where manufacturing is sited. We conduct this analysis for a particular case study where SiC devices are used in a medium-voltage motor drive.

Workplace Literacy for World Class Manufacturing. Final Report.

Science.gov (United States)

Dowling, William D.; And Others

The Ohio State University, Inland Fisher Guide Division of General Motors, and United Auto Workers Local 969 formed a collaborative partnership in 1990 to train employees whose inadequate literacy skills made them unable to respond to the requirements of "synchronous manufacturing" (or "just in time" production). One of the goals is to reduce the…

U.S. Job Creation Due to Nuclear Power Resurgence in The United States — Volumes 1 and 2

Energy Technology Data Exchange (ETDEWEB)

Catherine M. Plowman

2004-11-01

The recent revival of interest in nuclear power is causing a reexamination of the role of nuclear power in the United States. This renewed interest has led to questions regarding the capability and capacity of current U.S. industries to support a renewal of nuclear power plant deployment. This study was conducted to provide an initial estimate of jobs to be gained in the U.S. through the repatriation of the nuclear manufacturing industry. In the course of the study, related job categories were also modeled to provide an additional estimate of the potential expansion of existing industries (i.e., plant construction and operations) in conjunction with the repatriation of manufacturing jobs.

39 CFR 221.1 - The United States Postal Service.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false The United States Postal Service. 221.1 Section 221.1 Postal Service UNITED STATES POSTAL SERVICE ORGANIZATION AND ADMINISTRATION GENERAL ORGANIZATION § 221.1 The United States Postal Service. The United States Postal Service was established as an...

UNITED STATES DURING THE COLD WAR 1945-1990

Directory of Open Access Journals (Sweden)

Novita Mujiyati

2016-02-01

Full Text Available United States and the Soviet Union is a country on the part of allies who emerged as the winner during World War II. However, after reaching the Allied victory in the situation soon changed, man has become an opponent. United States and the Soviet Union are competing to expand the influence and power. To compete the United States strive continuously strengthen itself both in the economic and military by establishing a defense pact and aid agencies in the field of economy. During the Cold War the two are not fighting directly in one of the countries of the former Soviet Union and the United States. However, if understood, teradinya the Korean War and the Vietnam War is a result of tensions between the two countries and is a direct warfare conducted by the United States and the Soviet Union. Cold War ended in conflict with the collapse of the Soviet Union and the United States emerged as the winner of the country.

Wellbore manufacturing processes for in situ heat treatment processes

Science.gov (United States)

Davidson, Ian Alexander; Geddes, Cameron James; Rudolf, Randall Lynn; Selby, Bruce Allen; MacDonald, Duncan Charles

2012-12-11

A method includes making coiled tubing at a coiled tubing manufacturing unit coupled to a coiled tubing transportation system. One or more coiled tubing reels are transported from the coiled tubing manufacturing unit to one or more moveable well drilling systems using the coiled tubing transportation system. The coiled tubing transportation system runs from the tubing manufacturing unit to one or more movable well drilling systems, and then back to the coiled tubing manufacturing unit.

2016 State of Wind Development in the United States by Region

Energy Technology Data Exchange (ETDEWEB)

Baranowski, Ruth [National Renewable Energy Lab. (NREL), Golden, CO (United States); Oteri, Frank [National Renewable Energy Lab. (NREL), Golden, CO (United States); Baring-Gould, Ian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-04-19

Significant expansion of wind energy development will be required to achieve the scenarios outlined in the U.S. Department of Energy's (DOE)'s Wind Vision: 20% wind energy by 2030 and 35% wind energy by 2050. Wind energy currently provides nearly 5% of the nation's electricity but has the potential to provide much more. The wind industry and the DOE's Wind Energy Technologies Office are addressing technical wind energy challenges, such as reducing turbine costs and increasing energy production and reliability. The Office recognizes that public acceptance of wind energy can be challenging, depending on the proximity of proposed wind farms to local populations. Informed decision makers and communities equipped with unbiased information about the benefits and impacts of wind energy development are better prepared to navigate the sometimes contentious development process. In 2014, DOE established six Regional Resource Centers (RRCs) across the United States to communicate unbiased, credible information about wind energy to stakeholders through regional networks. The RRCs provide ready access to this information to familiarize the public with wind energy; raise awareness about potential benefits and issues; and disseminate data on siting considerations such as turbine sound and wildlife habitat protection. This document summarizes the status and drivers for U.S. wind energy development during 2016. RRC leaders provided a report of wind energy development in their regions, which was combined with findings from National Renewable Energy Laboratory (NREL) researchers to provide an account of the state of the regions, as well as updates on developments in individual states. NREL researchers and state partners added updates for all states that are not directly supported by an RRC. Accounts for each region include updates on renewable portfolio standards, the Clean Power Plan, workforce development, manufacturing and economic development, and individual

78 FR 27857 - United States Standards for Wheat

Science.gov (United States)

2013-05-13

... RIN 0580-AB12 United States Standards for Wheat AGENCY: Grain Inspection, Packers and Stockyards... (GIPSA) is revising the United States Standards for Wheat under the United States Grain Standards Act (USGSA) to change the definition of Contrasting classes (CCL) in the class Hard White wheat. This change...

The Near-Term Impacts of Carbon Mitigation Policies on Manufacturing Industries

OpenAIRE

Morgenstern, Richard; Shih, Jhih-Shyang; Ho, Mun; Zhang, Xuehua

2002-01-01

Who will pay for new policies to reduce carbon dioxide and other greenhouse gas emissions in the United States? This paper considers a slice of the question by examining the near-term impact on domestic manufacturing industries of both upstream (economy-wide) and downstream (electric power industry only) carbon mitigation policies. Detailed Census data on the electricity use of four-digit manufacturing industries is combined with input-output information on interindustry purchases to paint a ...

Tuberculosis along the United States-Mexico border, 1993-2001.

Science.gov (United States)

Schneider, Eileen; Laserson, Kayla F; Wells, Charles D; Moore, Marisa

2004-07-01

Tuberculosis (TB) is a leading public health problem and a recognized priority for the federal Governments of both Mexico and the United States of America. The objectives of this research, primarily for the four states in the United States that are along the border with Mexico, were to: (1) describe the epidemiological situation of TB, (2) identify TB risk factors, and (3) discuss tuberculosis program strategies. We analyzed tuberculosis case reports collected from 1993 through 2001 by the tuberculosis surveillance system of the United States. We used those data to compare TB cases mainly among three groups: (1) Mexican-born persons in the four United States border states (Arizona, California, New Mexico, and Texas), (2) persons in those four border states who had been born in the United States, and (3) Mexican-born persons in the 46 other states of the United States, which do not border Mexico. For the period from 1993 through 2001, of the 16 223 TB cases reported for Mexican-born persons in the United States, 12 450 of them (76.7%) were reported by Arizona, California, New Mexico, and Texas. In those four border states overall in 2001, tuberculosis case rates for Mexican-born persons were 5.0 times as high as the rates for persons born in the United States; those four states have 23 counties that directly border on Mexico, and the ratio in those counties was 5.8. HIV seropositivity, drug and alcohol use, unemployment, and incarceration were significantly less likely to be reported in Mexican-born TB patients from the four border states and the nonborder states than in patients born in the United States from the four border states (P pulmonary tuberculosis patients who were 18-64 years of age and residing in the four border states, the Mexican-born patients were 3.6 times as likely as the United States-born patients were to have resistance to at least isoniazid and rifampin (i. e., to have multidrug-resistant TB) and twice as likely to have isoniazid resistance

Global Entrepreneurship and the United States

Science.gov (United States)

2010-09-01

Global Entrepreneurship and the United States by Zoltan J. Acs Laszlo Szerb Ruxton, MD 21204 for under contract number SBAHQ-09...SUBTITLE Global Entrepreneurship and the United States 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...3 2.1. Assessing Entrepreneurship ..................................................................................4 2.2. Stages of Development

75 FR 25925 - United States Mint

Science.gov (United States)

2010-05-10

... Committee May 25, 2010 Public Meeting. SUMMARY: Pursuant to United States Code, Title 31, section 5135(b)(8... scheduled for May 25, 2010. Date: May 25, 2010. Time: 9 a.m. to 12 p.m. Location: 8th Floor Board Room, United States Mint, 801 9th Street, NW., Washington, DC 20220. Subject: Review and discuss obverse and...

31 CFR 515.330 - Person within the United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Person within the United States. 515... Definitions § 515.330 Person within the United States. (a) The term person within the United States, includes: (1) Any person, wheresoever located, who is a resident of the United States; (2) Any person actually...

Have U.S. Manufacturing Inventories Really Decreased? An Empirical Study

OpenAIRE

S. Rajagopalan; Arvind Malhotra

2001-01-01

Numerous normative models have been developed to determine optimal inventory levels, and several articles and case studies have been written about the concerted efforts and practices adopted by manufacturing firms in the United States to reduce inventories. But little is known about whether inventories have indeed decreased in U.S. manufacturing and whether such a decrease has been restricted to a few well-publicized firms or is true at an industry level. Using data published by the U.S. Cens...

45 CFR 212.7 - Repayment to the United States.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Repayment to the United States. 212.7 Section 212... UNITED STATES CITIZENS RETURNED FROM FOREIGN COUNTRIES § 212.7 Repayment to the United States. (a) An..., any or all of the cost of such assistance to the United States, except insofar as it is determined...

20 CFR 416.215 - You leave the United States.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false You leave the United States. 416.215 Section... Eligible § 416.215 You leave the United States. You lose your eligibility for SSI benefits for any month during all of which you are outside of the United States. If you are outside of the United States for 30...

37 CFR 1.412 - The United States Receiving Office.

Science.gov (United States)

2010-07-01

... Information § 1.412 The United States Receiving Office. (a) The United States Patent and Trademark Office is a Receiving Office only for applicants who are residents or nationals of the United States of America. (b) The... “United States Receiving Office” or by the abbreviation “RO/US.” (c) The major functions of the Receiving...

Relational Inequality: Gender Earnings Inequality in U.S. and Japanese Manufacturing Plants in the Early 1980s

Science.gov (United States)

Avent-Holt, Dustin; Tomaskovic-Devey, Donald

2012-01-01

We examine the relational model of inequality using samples of employer-employee matched data from manufacturing plants in the United States and Japan. We argue that gender is a salient status characteristic in both the United States and Japan, but because of differences in gender politics, wage inequality will vary more across U.S. workplaces…

On the role of the residual stress state in product manufacturing

NARCIS (Netherlands)

Zijlstra, G.; Groen, M.; Post, J.; Ocelik, V.; de Hosson, J.Th.M.

2016-01-01

This paper concentrates on the effect of the residual stress state during product manufacturing of AISI 420 steel on the final shape of the product. The work includes Finite Element (FE) calculations of the distribution of the residual stresses after metal forming and a heat treatment. The evolution

National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

Science.gov (United States)

Heidari, Farzin

The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

Supply Chain and Blade Manufacturing Considerations in the Global Wind Industry

Energy Technology Data Exchange (ETDEWEB)

James, Ted [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goodrich, Alan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-12-12

Over the past decade, significant wind manufacturing capacity has been built in the United States in response to an increasingly large domestic market. Recent U.S. manufacturing production levels exceed anticipated near-term domestic demand for select parts of the supply chain, in part due to policy uncertainty, and this is resulting in some restructuring in the industry. Factor location decisions are influenced by a combination of quantitative and qualitative factors; proximity to end-markets is often a key consideration, especially for manufacturers of large wind turbine components. Technology advancements in the wind sector are continuing, and larger blade designs are being pursued in the market, which may increase U.S.-based manufacturing opportunities.

16 CFR 233.3 - Advertising retail prices which have been established or suggested by manufacturers (or other...

Science.gov (United States)

2010-01-01

... manufacturer; direct mail advertising; distribution of promotional material or price lists designed for display... deceptive practice. Consider the following example: (h) Manufacturer Roe, who makes Brand X pens and sells them throughout the United States, advertises his pen in a national magazine as having a “Suggested...

Minding the Gap: Investing in a Skilled Manufacturing Workforce

Science.gov (United States)

Richard, Alan

2015-01-01

Advanced manufacturing is growing and thriving in the United States. Companies are in great need of reliable employees who can communicate well, effectively make decisions, and are interested in long-term careers with opportunity for advancement. Employers have identified a need for a more robust talent pipeline to narrow America's skills gap--a…

The United States and the Kurds: Case Studies in United States Engagement

National Research Council Canada - National Science Library

Lambert, Peter

1997-01-01

..., between 1969- 1975, and 1990-1996. Both eras saw the United States able to influence events relating to the Kurds in support of a larger regional policy, only to find no easy solution to the Kurdish quest for autonomy...

Use of the LITEE Lorn Manufacturing Case Study in a Senior Chemical Engineering Unit Operations Laboratory

Science.gov (United States)

Abraham, Nithin Susan; Abulencia, James Patrick

2011-01-01

This study focuses on the effectiveness of incorporating the Laboratory for Innovative Technology and Engineering Education (LITEE) Lorn Manufacturing case into a senior level chemical engineering unit operations course at Manhattan College. The purpose of using the case study is to demonstrate the relevance of ethics to chemical engineering…

United States rejoin ITER

International Nuclear Information System (INIS)

Roberts, M.

2003-01-01

Upon pressure from the United States Congress, the US Department of Energy had to withdraw from further American participation in the ITER Engineering Design Activities after the end of its commitment to the EDA in July 1998. In the years since that time, changes have taken place in both the ITER activity and the US fusion community's position on burning plasma physics. Reflecting the interest in the United States in pursuing burning plasma physics, the DOE's Office of Science commissioned three studies as part of its examination of the option of entering the Negotiations on the Agreement on the Establishment of the International Fusion Energy Organization for the Joint Implementation of the ITER Project. These were a National Academy Review Panel Report supporting the burning plasma mission; a Fusion Energy Sciences Advisory Committee (FESAC) report confirming the role of ITER in achieving fusion power production, and The Lehman Review of the ITER project costing and project management processes (for the latter one, see ITER CTA Newsletter, no. 15, December 2002). All three studies have endorsed the US return to the ITER activities. This historical decision was announced by DOE Secretary Abraham during his remarks to employees of the Department's Princeton Plasma Physics Laboratory. The United States will be working with the other Participants in the ITER Negotiations on the Agreement and is preparing to participate in the ITA

United States Stateplane Zones - NAD83

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — U.S. State Plane Zones (NAD 1983) represents the State Plane Coordinate System (SPCS) Zones for the 1983 North American Datum within United States.

United States Stateplane Zones - NAD27

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — U.S. State Plane Zones (NAD 1927) represents the State Plane Coordinate System (SPCS) Zones for the 1927 North American Datum within United States.

1982 survey of United States uranium marketing activity

International Nuclear Information System (INIS)

1983-09-01

This report is based on survey data from all utilities, reactor manufacturers, and uranium producers who market uranium. The survey forms are mailed in January of each year with updates in July of each year. This year 59 utilities, 5 reactor manufacturers and agents, and 57 uranium producers were surveyed. Completed survey forms were checked for errors, corrected as necessary, and processed. These data formed the basis for the development of the report. This report is intended for Congress, federal and state agencies, the nuclear industry, and the general public

Manufacturing pre-qualification of a Short Breeder Unit mockup (SHOBU) as part of the roadmap toward the out-of-pile validation of a full scale Helium Cooled Pebble Bed Breeder Unit

International Nuclear Information System (INIS)

Hernández, Francisco A.; Rey, Jorg; Neuberger, Heiko; Krasnorutskyi, Sergii; Niewöhner, Reinhard; Felde, Alexander

2015-01-01

Highlights: • A relevant mockup of a HCPB Breeder Unit for ITER (SHOBU) has been manufactured. • The manufacturing technologies used in SHOBU and its assembly sequence are reported. • Preliminary qualification of the welds has been successfully done after codes. • Future work foreseen to manufacture a feasibility mockup according to RCC-MRx code. - Abstract: The key components of the Helium Cooled Pebble Bed Test Blanket Module (HCPB TBM) in ITER are the Breeder Units (BU). These are the responsible for the tritium breeding and part of the heat extraction in the HCPB TBM. After a detailed design and engineering phase performed during the last years in the Karlsruhe Institute of Technology (KIT), a reference model for the manufacturing of a HCPB BU mock-up has been obtained. The mid-term is the out-of-pile qualification of the thermal and thermo-mechanical performance of a full-scale HCPB BU mock-up in a dedicated helium loop. Several key manufacturing technologies have been developed for the fabrication of the HCPB BU. In order to pre-qualify these techniques, a Short Breeder Unit mock-up (SHOBU) is under construction and to be tested. This paper aims at describing the relevance of SHOBU with a full-scale HCPB BU, the constitutive parts of SHOBU, the manufacturing and joining technologies involved, the assembly sequence (taking into consideration functional steps like its filling with Li_4SiO_4 pebbles or its assembly in the HCPB TBM) and the welding procedures studied. The paper concludes with a description of the required pre-qualification tests performed to SHOBU, i.e. pressure and leak tightness tests, according to the standards.

Present state of electric power business in United States and Europe

International Nuclear Information System (INIS)

Onishi, Kenichi

2011-01-01

This article reported present state of nuclear power and electric power business in United States and Europe after Fukushima Daiichi Accident. As for the trend of demand and supply of electric power and policy, the accident forced Germany possibly to proceed with phase-out of nuclear power, but France and United States to sustain nuclear power with no great change of energy policy at this moment. As for the trend of electric power market, there was not state in United States with liberalized retail market of electric power after rolling blackouts occurred in California State in the early 2000s. In Germany proceeding with renewable energy introduction, renewable electricity fed into the grid was paid for by the network operators at fixed tariffs and the costs passed on to electricity consumers were increasing. Renewable Portfolio Standards (RPS) in United States forced the state to introduction of renewable energy to some ratio, and Feed-in Tariff (FIT) introduced in EU in 1990s lead to introduction of a large amount of renewable electricity targeted in 2020. Huge amount of wind power introduction brought about several problems to solve such that excess electric power above domestic demand had bad effects on grids in neighboring region. Enforcement of power transmission lines was also needed with increase of maximum electric power as well as introduction of a large amount of renewable electricity. (T. Tanaka)

Death in the United States, 2011

Science.gov (United States)

... Order from the National Technical Information Service NCHS Death in the United States, 2011 Recommend on Facebook ... 2011 SOURCE: National Vital Statistics System, Mortality. Do death rates vary by state? States experience different mortality ...

31 CFR 103.39 - Person outside the United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Person outside the United States. 103... Person outside the United States. For the purposes of this subpart, a remittance or transfer of funds, or... the United States, shall be deemed to be a remittance or transfer to a person outside the United...

A Taxonomy of Manufacturing Strategies

OpenAIRE

Jeffrey G. Miller; Aleda V. Roth

1994-01-01

This paper describes the development and analysis of a numerical taxonomy of manufacturing strategies. The taxonomy was developed with standard methods of cluster analysis, and is based on the relative importance attached to eleven competitive capabilities defining the manufacturing task of 164 large American manufacturing business units. Three distinct clusters of manufacturing strategy groups were observed. Though there is an industry effect, all three manufacturing strategy types are obser...

Energy problems of the United States

International Nuclear Information System (INIS)

Pertuzio, A.

2006-01-01

The united states are the third world producer of oil which accounts for 440% of world production and 20 million barrels/day of which 60% are imported. That dependence on imports is likely to increase in the next decades. Such supplies and their security are therefore a fundamental factor of the United States foreign policy in combination with their political, economic and strategic objectives in a world both unsure and dangerous

Household pesticide usage in the United States.

Science.gov (United States)

Savage, E P; Keefe, T J; Wheeler, H W; Mounce, L; Helwic, L; Applehans, F; Goes, E; Goes, T; Mihlan, G; Rench, J; Taylor, D K

1981-01-01

A total of 10,000 U.S. households in 25 standard metropolitan statistical areas and 25 counties were included in the United States. More than 8,200 households granted an interview. Nine of every ten households in the United States used some types of pesticide in their house, garden, or yard. Households in the southeastern United States used the most pesticides. Although more than 500 different pesticide formulations were used by the sampled households, 15 pesticides accounted for 65.5% of all pesticides reported in this study. Thirteen of these 15 pesticides were insecticides, one was a herbicide, and one was a rodenticide.

Comparative Power Projectional Capabilities: The Soviet Union and the United States 1980-85.

Science.gov (United States)

1981-02-26

Comparisons 2 LDC Growth of GDP , 1970-1990 3 Major LDC Primary Product and Manufactured Good Exporters 4 LDCs with Declining Terms of Trade 5 External Public...Amphibious Unit -- Southern Spain & Western Mediterranean -Marine Amphibious Unit Auckland , New Zealand - Infantry Company Okinawa, Japan - Marine

Repair of manufacturing defects in the armor of plasma facing units of the ITER Divertor Dome

International Nuclear Information System (INIS)

Litunovsky, Nikolay; Alekseenko, Evgeny; Kuznetsov, Vladimir; Lyanzberg, Dmitriy; Makhankov, Aleksey; Rulev, Roman

2013-01-01

Highlights: • Sporadic manufacturing defects in ITER Divertor Dome PFUs may be repaired. • We have developed a repair technique for ITER Divertor Dome PFUs. • Armor repair technique for ITER Divertor Dome PFUs is successfully tested. -- Abstract: The paper describes the repair procedure developed for removal of manufacturing defects occurring sporadically during armoring of plasma facing units (PFUs) of the ITER Divertor Dome. Availability of armor repair technique is prescribed by the procurement arrangement for the ITER Divertor Dome concluded in 2009 between the ITER Organization and the ITER Domestic Agency of Russia. The paper presents the detailed description of the procedure, data on its effect on the joints of the rest part of the armor and on the grain structure of the PFU heat sink. The results of thermocycling of large-scale Dome PFU mock-ups manufactured with demonstration of armor repair are also given

Repair of manufacturing defects in the armor of plasma facing units of the ITER Divertor Dome

Energy Technology Data Exchange (ETDEWEB)

Litunovsky, Nikolay, E-mail: nlitunovsky@sintez.niiefa.spb.su; Alekseenko, Evgeny; Kuznetsov, Vladimir; Lyanzberg, Dmitriy; Makhankov, Aleksey; Rulev, Roman

2013-10-15

Highlights: • Sporadic manufacturing defects in ITER Divertor Dome PFUs may be repaired. • We have developed a repair technique for ITER Divertor Dome PFUs. • Armor repair technique for ITER Divertor Dome PFUs is successfully tested. -- Abstract: The paper describes the repair procedure developed for removal of manufacturing defects occurring sporadically during armoring of plasma facing units (PFUs) of the ITER Divertor Dome. Availability of armor repair technique is prescribed by the procurement arrangement for the ITER Divertor Dome concluded in 2009 between the ITER Organization and the ITER Domestic Agency of Russia. The paper presents the detailed description of the procedure, data on its effect on the joints of the rest part of the armor and on the grain structure of the PFU heat sink. The results of thermocycling of large-scale Dome PFU mock-ups manufactured with demonstration of armor repair are also given.

Financial Innovation Among the Community Wind Sector in the United States

Energy Technology Data Exchange (ETDEWEB)

Bolinger, Mark

2011-01-19

In the relatively brief history of utility-scale wind generation, the 'community wind' sector - defined here as consisting of relatively small utility-scale wind power projects that are at least partly owned by one or more members of the local community - has played a vitally important role as a 'test bed' or 'proving ground' for wind turbine manufacturers. In the 1980s and 1990s, for example, Vestas and other now-established European wind turbine manufacturers relied heavily on community wind projects in Scandinavia and Germany to install - and essentially field-test - new turbine designs. The fact that orders from community wind projects seldom exceeded more than a few turbines at a time enabled the manufacturers to correct any design flaws or manufacturing defects fairly rapidly, and without the risk of extensive (and expensive) serial defects that can accompany larger orders. Community wind has been slower to take root in the United States - the first such projects were installed in the state of Minnesota around the year 2000. Just as in Europe, however, the community wind sector in the U.S. has similarly served as a proving ground - but in this case for up-and-coming wind turbine manufacturers that are trying to break into the broader U.S. wind power market. For example, community wind projects have deployed the first U.S. installations of wind turbines from Suzlon (in 2003), DeWind (2008), Americas Wind Energy (2008) and later Emergya Wind Technologies (2010),1 Goldwind (2009), AAER/Pioneer (2009), Nordic Windpower (2010), Unison (2010), and Alstom (2011). Just as it has provided a proving ground for new turbines, so too has the community wind sector in the United States served as a laboratory for experimentation with innovative new financing structures. For example, a variation of one of the most common financing arrangements in the U.S. wind market today - the 'partnership flip structure' - was first developed by

COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH

Energy Technology Data Exchange (ETDEWEB)

Roy Scandrol

2003-10-01

Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregates that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create nine (9) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry FGD technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.

COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH

Energy Technology Data Exchange (ETDEWEB)

Roy Scandrol

2003-04-01

Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregates that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create eight (8) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry flue gas desulfurization (FGD) technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.

48 CFR 52.225-21 - Required Use of American Iron, Steel, and Manufactured Goods-Buy American Act-Construction...

Science.gov (United States)

2010-10-01

... applies, that all manufactured construction material in the project is manufactured in the United States...; (E) Time of delivery or availability; (F) Location of the construction project; (G) Name and address of the proposed supplier; and (H) A detailed justification of the reason for use of foreign...

75 FR 13345 - Pricing for Certain United States Mint Products

Science.gov (United States)

2010-03-19

... DEPARTMENT OF THE TREASURY United States Mint Pricing for Certain United States Mint Products AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of First Spouse Bronze Medals and 2010 First Spouse Bronze Medal Series: Four...

22 CFR 22.3 - Remittances in the United States.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Remittances in the United States. 22.3 Section...-DEPARTMENT OF STATE AND FOREIGN SERVICE § 22.3 Remittances in the United States. (a) Type of remittance. Remittances shall be in the form of: (1) Check or bank draft drawn on a bank in the United States; (2) money...

2017 State of Wind Development in the United States by Region

Energy Technology Data Exchange (ETDEWEB)

Oteri, Frank A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baranowski, Ruth E [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baring-Gould, Edward I [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Tegen, Suzanne I [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-04-13

This document summarizes the status and drivers for U.S. wind energy development during 2017. Regional Resource Center (RRC) leaders provided a report of wind energy development in their regions, which was combined with findings from National Renewable Energy Laboratory (NREL) researchers to provide an account of the state of the regions, as well as updates on developments in individual states. NREL researchers and state partners added updates for all states that are not directly supported by an RRC. Accounts for each region include updates on renewable portfolio standards, workforce development, manufacturing and economic development, and individual state updates for installed wind capacity, ongoing policy developments, planned projects and their status, transmission progress reports, etc. This report also highlights the efforts of the RRCs to engage stakeholders in their individual regions.

The United Mexican States: an update.

Science.gov (United States)

Hakkert, R; Aguirre, E J

1988-09-01

Although the popular North American opinion of Mexico is one that paints a picture of a poor, disadvantaged country, South America sees Mexico has a richer more prosperous nation. It is observed that only in the Latin American countries of Venezuela, Suriname and Trinidad and Tobago do consumers have higher incomes than Mexican consumers. Moreover, while millions of Mexicans migrate to the United States to seek a better standard of living, several thousand Central American refugees illegally migrate to Mexico in search of a better life. This better life includes an increased age of lie expectancy from 51 years in the 1950s to 64 years in the late 1970s. There have also been improvements in health care and school enrollments and in the low cost availability of education. Tourism and the prospect of the manufacturing of energy are significant, positive factors working in favor of an improved Mexican economy and a higher overall quality of life. However, Mexico faces serious problems such as a mounting foreign debt. Also rising is Mexico's population which has doubled since 1964 and which continues to grow at a rate of 1.9%. Economic programs and reforms and family development planning have been instituted in response to the countries' current recession and population growth and have begun to show positive results.

Reducing of Manufacturing Lead Time by Implementation of Lean Manufacturing Principles

Directory of Open Access Journals (Sweden)

Hussein Salem Ketan

2015-08-01

Full Text Available Many organizations today are interesting to implementing lean manufacturing principles that should enable them to eliminating the wastes to reducing a manufacturing lead time. This paper concentrates on increasing the competitive level of the company in globalization markets and improving of the productivity by reducing the manufacturing lead time. This will be by using the main tool of lean manufacturing which is value stream mapping (VSM to identifying all the activities of manufacturing process (value and non-value added activities to reducing elimination of wastes (non-value added activities by converting a manufacturing system to pull instead of push by applying some of pull system strategies as kanban and first on first out lane (FIFO. ARENA software is used to simulate the current and future state. This work is executed in the state company for electrical industries in Baghdad. The obtained results of the application showed that implementation of lean principles helped on reducing of a manufacturing lead time by 33%.

The United Kingdom: Issues for the United States

National Research Council Canada - National Science Library

Archick, Kristin

2007-01-01

...; and more recently, from the UK's strong support in countering terrorism and confronting Iraq. The United States and Britain also share a mutually beneficial trade and economic relationship, and are each other's biggest foreign direct investors...

Radiation therapy facilities in the United States

International Nuclear Information System (INIS)

Ballas, Leslie K.; Elkin, Elena B.; Schrag, Deborah; Minsky, Bruce D.; Bach, Peter B.

2006-01-01

Purpose: About half of all cancer patients in the United States receive radiation therapy as a part of their cancer treatment. Little is known, however, about the facilities that currently deliver external beam radiation. Our goal was to construct a comprehensive database of all radiation therapy facilities in the United States that can be used for future health services research in radiation oncology. Methods and Materials: From each state's health department we obtained a list of all facilities that have a linear accelerator or provide radiation therapy. We merged these state lists with information from the American Hospital Association (AHA), as well as 2 organizations that audit the accuracy of radiation machines: the Radiologic Physics Center (RPC) and Radiation Dosimetry Services (RDS). The comprehensive database included all unique facilities listed in 1 or more of the 4 sources. Results: We identified 2,246 radiation therapy facilities operating in the United States as of 2004-2005. Of these, 448 (20%) facilities were identified through state health department records alone and were not listed in any other data source. Conclusions: Determining the location of the 2,246 radiation facilities in the United States is a first step in providing important information to radiation oncologists and policymakers concerned with access to radiation therapy services, the distribution of health care resources, and the quality of cancer care

75 FR 13345 - Pricing for Certain 2010 United States Mint Products

Science.gov (United States)

2010-03-19

... DEPARTMENT OF THE TREASURY United States Mint Pricing for Certain 2010 United States Mint Products AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of the 2010 United States Mint Presidential $1 Coin and First Spouse Medal...

Intergenerational educational mobility in Denmark and the United States

DEFF Research Database (Denmark)

Andrade, Stefan Bastholm; Thomsen, Jens-Peter

2018-01-01

An overall finding in comparative mobility studies is that intergenerational mobility is greater in Scandinavia than in liberal welfare-state countries like the United States and United Kingdom. However, in a recent study, Landersø and Heckman (L & H) (2017) argue that intergenerational educational...... mobility in Denmark and the United States is remarkably similar. L & H’s findings run contrary to widespread beliefs and have been echoed in academia and mass media on both sides of the Atlantic Ocean. In this article, we reanalyze educational mobility in Denmark and the United States using the same data...... sources as L & H. We apply several different methodological approaches from economics and sociology, and we consistently find that educational mobility is higher in Denmark than in the United States....

Toll Facilities in the United States

Data.gov (United States)

Department of Transportation — Biennial report containing selected information on toll facilities in the United States that has been provided to FHWA by the States and/or various toll authorities...

State nuclear initiatives in the United States

International Nuclear Information System (INIS)

Strauss, P.L.; Stoiber, C.R.

1977-01-01

The paper deals with State nuclear initiatives regarding the role of nuclear power in the energy future of the United States. The question of whether and under what circumstances nuclear facilities should be used to generate electricity was put to the popular vote in several States in 1976. Some general principles of Federal-State relations are discussed with specific reference to nuclear regulations. The initiative mechanism itself is described as well as its legal form and background. The parallel developments in the State and Federal legislative consideration of nuclear issues is reviewed and the suggested reasons for the defeat of the proposals in the seven States concerned are discussed. Finally, the author draws some conclusions on the effects of the 1976 initiatives on future decision-making in the US on energy policy in general and nuclear power in particular. (NEA) [fr

Case study of fly ash brick manufacturing units at Kota in Rajasthan

Science.gov (United States)

Sharma, Y.; Saxena, B. K.; Rao, K. V. S.

2018-03-01

Kota Super Thermal Power Station of 1240 MW is located at Kota in Rajasthan, India. The quantity of fly ash generated by it is about 1.64 to 2.03 million tonnes per year. This fly ash is being utilized for making bricks, tiles, portland pozzolana cement, construction of highways, and other purposes. 1.79 million tonnes of fly ash was utilized for different applications in one year duration from April 01st, 2015 to March 31st, 2016. Out of this total utilization, 0.6439 million tonnes (36.06 %) of fly ash was used for making bricks, blocks, and tiles. In this paper, a case study of two fly ash brick manufacturing units using fly ash produced from Kota Super Thermal Power Station is described. These units produce about 15,000 and 20,000 bricks respectively by employing 10 and 16 workers each and are making a profit of about Rs. 6,000 and Rs. 8,000 per day in one shift.

27 CFR 479.89 - Transfers to the United States.

Science.gov (United States)

2010-04-01

... Transfers to the United States. A firearm may be transferred to the United States or any department... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Transfers to the United States. 479.89 Section 479.89 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO...

32 CFR 516.54 - Witnesses for the United States.

Science.gov (United States)

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Witnesses for the United States. 516.54 Section..., Travel, and Expenses of Witnesses § 516.54 Witnesses for the United States. (a) Status of witness. A military member authorized to appear as a witness for the United States, including those authorized to...

32 CFR 150.21 - Appeals by the United States.

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Appeals by the United States. 150.21 Section 150... the United States. (a) Restricted filing. Only a representative of the government designated by the Judge Advocate General of the respective service may file an appeal by the United States under Article...

Consolidating indigenous capability for PHWR fuel manufacturing in India

Energy Technology Data Exchange (ETDEWEB)

Jayaraj, R.N., E-mail: cenfc@nfc.gov.in [Nuclear Fuel Complex, Dept. of Atomic Energy, Government of India, Hyderabad (India)

2010-07-01

Since inception of Nuclear Power Programme in India greater emphasis was laid on total self- reliance in Fuel manufacturing. For Pressurized Heavy Water Reactors (PHWRs), which forms a base for the first stage of the programme, an integrated approach was adopted encompassing different areas of expertise -Design, Construction and Operation of PHWRs; Heavy Water production and Fuel Design and Manufacturing technologies. For the first PHWR constructed about 35 years back with the Canadian collaboration, known as Rajasthan Atomic Power Station (RAPS), half the core requirement of fuel was met from the fuel manufactured for the first time in India. Since then the fuel production capabilities were enhanced by setting up an industrial scale fuel manufacturing facility - Nuclear Fuel Complex (NFC) at Hyderabad, India during early '70s. NFC has been continuously expanding its capacities to meet the fuel demand of all the PHWRs constructed and operated by Nuclear Power Corporation of India Limited (NPCIL). Presently, fifteen PHWR 220 MWe units and two PHWR 540 MWe units are in operation and one more PHWR 220 MWe unit is in advanced stage of commissioning in India. While continuously engaged in the manufacture of fuel for these reactors, NFC has been upgrading the production lines with new processes and quality assurance systems. In order to multiply the production capacities, NFC has embarked on developing indigenous capability for design and building of special purpose process equipment for Uranium dioxide powder production, pelletisation and final assembly operations. Some of the equipment having state-of-the-art features includes dryers/furnaces for UO{sub 2} powder, presses/ sintering furnaces for pelletisation and resistance welding equipment/ machining stations for assembly operations. In addition, several campaigns were taken over the years for manufacturing PHWR fuel bundles containing reprocessed Uranium, Thoria and slightly enriched Uranium. The paper

Consolidating indigenous capability for PHWR fuel manufacturing in India

International Nuclear Information System (INIS)

Jayaraj, R.N.

2010-01-01

Since inception of Nuclear Power Programme in India greater emphasis was laid on total self- reliance in Fuel manufacturing. For Pressurized Heavy Water Reactors (PHWRs), which forms a base for the first stage of the programme, an integrated approach was adopted encompassing different areas of expertise -Design, Construction and Operation of PHWRs; Heavy Water production and Fuel Design and Manufacturing technologies. For the first PHWR constructed about 35 years back with the Canadian collaboration, known as Rajasthan Atomic Power Station (RAPS), half the core requirement of fuel was met from the fuel manufactured for the first time in India. Since then the fuel production capabilities were enhanced by setting up an industrial scale fuel manufacturing facility - Nuclear Fuel Complex (NFC) at Hyderabad, India during early '70s. NFC has been continuously expanding its capacities to meet the fuel demand of all the PHWRs constructed and operated by Nuclear Power Corporation of India Limited (NPCIL). Presently, fifteen PHWR 220 MWe units and two PHWR 540 MWe units are in operation and one more PHWR 220 MWe unit is in advanced stage of commissioning in India. While continuously engaged in the manufacture of fuel for these reactors, NFC has been upgrading the production lines with new processes and quality assurance systems. In order to multiply the production capacities, NFC has embarked on developing indigenous capability for design and building of special purpose process equipment for Uranium dioxide powder production, pelletisation and final assembly operations. Some of the equipment having state-of-the-art features includes dryers/furnaces for UO 2 powder, presses/ sintering furnaces for pelletisation and resistance welding equipment/ machining stations for assembly operations. In addition, several campaigns were taken over the years for manufacturing PHWR fuel bundles containing reprocessed Uranium, Thoria and slightly enriched Uranium. The paper summarises

United States housing, first quarter 2013

Science.gov (United States)

Delton Alderman

2014-01-01

Provides current and historical information on housing market in the United States. Information includes trends for housing permits and starts, housing under construction, and housing completions for single and multifamily units, and sales and construction. This report will be updated regularly.

An Estimate of Shallow, Low-Temperature Geothermal Resources of the United States

Energy Technology Data Exchange (ETDEWEB)

Mullane, Michelle; Gleason, Michael; Reber, Tim; McCabe, Kevin; Mooney, Meghan; Young, Katherine R.

2017-05-01

Low-temperature geothermal resources in the United States potentially hold an enormous quantity of thermal energy, useful for direct use in residential, commercial and industrial applications such as space and water heating, greenhouse warming, pool heating, aquaculture, and low-temperature manufacturing processes. Several studies published over the past 40 years have provided assessments of the resource potential for multiple types of low-temperature geothermal systems (e.g. hydrothermal convection, hydrothermal conduction, and enhanced geothermal systems) with varying temperature ranges and depths. This paper provides a summary and additional analysis of these assessments of shallow (= 3 km), low-temperature (30-150 degrees C) geothermal resources in the United States, suitable for use in direct-use applications. This analysis considers six types of geothermal systems, spanning both hydrothermal and enhanced geothermal systems (EGS). We outline the primary data sources and quantitative parameters used to describe resources in each of these categories, and present summary statistics of the total resources available. In sum, we find that low-temperature hydrothermal resources and EGS resources contain approximately 8 million and 800 million TWh of heat-in-place, respectively. In future work, these resource potential estimates will be used for modeling of the technical and market potential for direct-use geothermal applications for the U.S. Department of Energy's Geothermal Vision Study.

Use of raw materials in the United States from 1900 through 2014

Science.gov (United States)

Matos, Grecia R.

2017-08-22

The economic growth of an industrialized nation such as the United States requires raw materials for construction (buildings, bridges, highways, and so forth), defense, and processing and manufacture of goods and services. Since the beginning of the 20th century, the types and quantities of raw materials used have increased and changed significantly. This fact sheet quantifies the amounts of raw materials (other than food and fuel) that have been used in the U.S. economy annually for a period of 115 years, from 1900 through 2014. It provides a broad overview of the quantity (weight) of nonfood and nonfuel materials used in the economy and illustrates the use and significance of raw nonfuel minerals in particular as building blocks of society.These data have been compiled to help the public and policymakers understand the changing annual flow of raw materials put into use in the United States. Such information can be helpful in assessing the potential effects of materials use on the environment, assessing materials’ intensity of use, and examining the role that these materials play in the economy. The data presented indicate the substitution and shift in materials usage from renewable to nonrenewable materials during the 20th century. The disaggregated quantities by commodity (not shown in this fact sheet) may be tested against supply adequacy and end of life issues.

Arsenic in Ground Water of the United States

Science.gov (United States)

... Team More Information Arsenic in groundwater of the United States Arsenic in groundwater is largely the result of ... Gronberg (2011) for updated arsenic map. Featured publications United States Effects of human-induced alteration of groundwater flow ...

Selective Laser Melting: a regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications.

Science.gov (United States)

Mullen, Lewis; Stamp, Robin C; Brooks, Wesley K; Jones, Eric; Sutcliffe, Christopher J

2009-05-01

In this study, a novel porous titanium structure for the purpose of bone in-growth has been designed, manufactured and evaluated. The structure was produced by Selective Laser Melting (SLM); a rapid manufacturing process capable of producing highly intricate, functionally graded parts. The technique described utilizes an approach based on a defined regular unit cell to design and produce structures with a large range of both physical and mechanical properties. These properties can be tailored to suit specific requirements; in particular, functionally graded structures with bone in-growth surfaces exhibiting properties comparable to those of human bone have been manufactured. The structures were manufactured and characterized by unit cell size, strand diameter, porosity, and compression strength. They exhibited a porosity (10-95%) dependant compression strength (0.5-350 Mpa) comparable to the typical naturally occurring range. It is also demonstrated that optimized structures have been produced that possesses ideal qualities for bone in-growth applications and that these structures can be applied in the production of orthopedic devices. (c) 2008 Wiley Periodicals, Inc.

Enrichment situation outside the United States

International Nuclear Information System (INIS)

Anon.

1979-01-01

Different enrichment technologies are briefly characterized which include gaseous diffusion, which is presently the production mainstay of the United States and France; the gaseous centrifuge which is the production plant for Urenco and the technology for future United States enrichment expansion; the aero-dynamic processes which include the jet nozzle (also known as the Becker process) and the fixed-wall centrifuge (also known as the Helikon process); chemical processes; laser isotope separation processes (also referred to in the literature as LIS); and plasma technology

High resolution production water footprints of the United States

Science.gov (United States)

Marston, L.; Yufei, A.; Konar, M.; Mekonnen, M.; Hoekstra, A. Y.

2017-12-01

The United States is the largest producer and consumer of goods and services in the world. Rainfall, surface water supplies, and groundwater aquifers represent a fundamental input to this economic production. Despite the importance of water resources to economic activity, we do not have consistent information on water use for specific locations and economic sectors. A national, high-resolution database of water use by sector would provide insight into US utilization and dependence on water resources for economic production. To this end, we calculate the water footprint of over 500 food, energy, mining, services, and manufacturing industries and goods produced in the US. To do this, we employ a data intensive approach that integrates water footprint and input-output techniques into a novel methodological framework. This approach enables us to present the most detailed and comprehensive water footprint analysis of any country to date. This study broadly contributes to our understanding of water in the US economy, enables supply chain managers to assess direct and indirect water dependencies, and provides opportunities to reduce water use through benchmarking.

Leading Causes of Death in Females United States

Science.gov (United States)

... and Health Issues at Work Health Equity Leading Causes of Death in Females, United States Recommend on Facebook Tweet ... to current and previous listings for the leading causes of death in females in the United States. Please note ...

33 CFR 2.38 - Waters subject to the jurisdiction of the United States; waters over which the United States has...

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Waters subject to the jurisdiction of the United States; waters over which the United States has jurisdiction. 2.38 Section 2.38 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL JURISDICTION...

Unites States and the oil of the Middle-East

International Nuclear Information System (INIS)

Noel, P.

2005-08-01

The author discusses different aspects of the United States intervention and behavior in the Middle-East petroleum management. The Iraq and Iran potentials are largely under used. The Saudi Arabia defines its own oil policy, but benefits of the Unites States military help. The United States intervention is in the domain of the security of flux on the world market. (A.L.B.)

Food irradiation in the United States

International Nuclear Information System (INIS)

Pauli, G.H.

1991-01-01

Since 1963, some irradiated foods have been permitted for sale in the United States. Yet, at this time, commercial application has been limited to irradiation of a relatively small fraction of the spices and seasonings used as ingredients in other foods. The current situation regarding irradiated foods in the United States and how it developed is discussed. The author writes from experience gained as a Government regulator concerned primarily with ensuring safety of food and therefore this is stressed together with the crucial role played by consumers and industry. (author)

United States of America [Status and technology of polymer-containing fibrous materials in the Western Hemisphere

International Nuclear Information System (INIS)

Rotariu, G.J.; Mott, W.E.

1968-01-01

A research and development program on the radiation curing of wood impregnated with a monomer was initiated in the United States in 1961 by the U.S. Atomic Energy Commission at West Virginia University; this program has continued until today. The USAEC has also sponsored three studies covering different geographical areas of the country, in an attempt to determine the potential of wood-polymer materials. Another effort led to the design of a 200 pound per hour pilot plant for the manufacture of wood-methyl methacrylate materials and projected costs for a 300 pound per hour production plant. And the most recent AEC study involved the evaluation of over 8000 pounds of wood-polymer materials by 68 manufacturers of wood products; the wood-polymer materials utilizing 41 species of wood were produced for the AEC by Lockheed-Georgia Company, Dawsonville, Georgia. In 1965, studies on the thermal-catalytic production of wood polymers were begun at the College of Forestry, Syracuse University, Syracuse, New York

United States of America [Status and technology of polymer-containing fibrous materials in the Western Hemisphere

Energy Technology Data Exchange (ETDEWEB)

Rotariu, G. J.; Mott, W. E. [United States Atomic Energy Commission, Washington, DC 2054 (United States)

1968-10-15

A research and development program on the radiation curing of wood impregnated with a monomer was initiated in the United States in 1961 by the U.S. Atomic Energy Commission at West Virginia University; this program has continued until today. The USAEC has also sponsored three studies covering different geographical areas of the country, in an attempt to determine the potential of wood-polymer materials. Another effort led to the design of a 200 pound per hour pilot plant for the manufacture of wood-methyl methacrylate materials and projected costs for a 300 pound per hour production plant. And the most recent AEC study involved the evaluation of over 8000 pounds of wood-polymer materials by 68 manufacturers of wood products; the wood-polymer materials utilizing 41 species of wood were produced for the AEC by Lockheed-Georgia Company, Dawsonville, Georgia. In 1965, studies on the thermal-catalytic production of wood polymers were begun at the College of Forestry, Syracuse University, Syracuse, New York.

The State Geologic Map Compilation (SGMC) geodatabase of the conterminous United States

Science.gov (United States)

Horton, John D.; San Juan, Carma A.; Stoeser, Douglas B.

2017-06-30

The State Geologic Map Compilation (SGMC) geodatabase of the conterminous United States (https://doi. org/10.5066/F7WH2N65) represents a seamless, spatial database of 48 State geologic maps that range from 1:50,000 to 1:1,000,000 scale. A national digital geologic map database is essential in interpreting other datasets that support numerous types of national-scale studies and assessments, such as those that provide geochemistry, remote sensing, or geophysical data. The SGMC is a compilation of the individual U.S. Geological Survey releases of the Preliminary Integrated Geologic Map Databases for the United States. The SGMC geodatabase also contains updated data for seven States and seven entirely new State geologic maps that have been added since the preliminary databases were published. Numerous errors have been corrected and enhancements added to the preliminary datasets using thorough quality assurance/quality control procedures. The SGMC is not a truly integrated geologic map database because geologic units have not been reconciled across State boundaries. However, the geologic data contained in each State geologic map have been standardized to allow spatial analyses of lithology, age, and stratigraphy at a national scale.

Exporting Rambutan to United States: One Reality?

International Nuclear Information System (INIS)

Ahmad Zainuri Mohd Dzomir; Zainon Othman; Mohd Sidek Othman

2011-01-01

Rambutan is a one of commodity that are passed by United States of America authority to be market in that states. The main condition for the approval is the exporter must use irradiation technology as quarantine treatment to monitor the insects in there. United States of America's Agriculture Department (USDA-APHIS) has make early survey to the facilities involved in exporting process chain to overview Malaysia preparedness for this purpose. This paper work will discussed the possibility of this exporting implemented based on conditions rule by the USDA. (author)

75 FR 4973 - Registration Requirements for Importers and Manufacturers of Prescription Drug Products...

Science.gov (United States)

2010-02-01

... diverted to the clandestine manufacture of a controlled substance. Most of the ephedrine, pseudoephedrine... for-profit. Other: Not-for-profit, government agencies. Abstract: The Domestic Chemical Diversion... may be diverted in the United States for the production of illicit drugs must register with DEA...

Wheat rusts in the United States in 2016

Science.gov (United States)

In 2016, wheat stripe rust caused by Puccinia striiformis f. sp. graminis was widespread throughout the United States. Cool temperatures and abundant rainfall in the southern Great Plains allowed stripe rust to become widely established and spread throughout the Great Plains and eastern United State...

Manufacturing Performance in Indonesia, South Korea and Taiwan before and after the Crisis. An international Perspective, 1980-2000

NARCIS (Netherlands)

Stuivenwold, Edwin; Timmer, Marcel P.

2003-01-01

This paper analyses developments of comparative output and productivity levels in 17 manufacturing industries in Taiwan, South Korea and Indonesia compared to the United States for the period 1980-2000. In order to express value added in a common currency, unit value ratios are developed for the

United States National Seismographic Network

International Nuclear Information System (INIS)

Buland, R.

1993-09-01

The concept of a United States National Seismograph Network (USNSN) dates back nearly 30 years. The idea was revived several times over the decades. but never funded. For, example, a national network was proposed and discussed at great length in the so called Bolt Report (U. S. Earthquake Observatories: Recommendations for a New National Network, National Academy Press, Washington, D.C., 1980, 122 pp). From the beginning, a national network was viewed as augmenting and complementing the relatively dense, predominantly short-period vertical coverage of selected areas provided by the Regional Seismograph Networks (RSN's) with a sparse, well-distributed network of three-component, observatory quality, permanent stations. The opportunity finally to begin developing a national network arose in 1986 with discussions between the US Geological Survey (USGS) and the Nuclear Regulatory Commission (NRC). Under the agreement signed in 1987, the NRC has provided $5 M in new funding for capital equipment (over the period 1987-1992) and the USGS has provided personnel and facilities to develop. deploy, and operate the network. Because the NRC funding was earmarked for the eastern United States, new USNSN station deployments are mostly east of 105 degree W longitude while the network in the western United States is mostly made up of cooperating stations (stations meeting USNSN design goals, but deployed and operated by other institutions which provide a logical extension to the USNSN)

37 CFR 1.413 - The United States International Searching Authority.

Science.gov (United States)

2010-07-01

... Processing Provisions General Information § 1.413 The United States International Searching Authority. (a... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false The United States International Searching Authority. 1.413 Section 1.413 Patents, Trademarks, and Copyrights UNITED STATES PATENT...

United States Attorney Prosecutions

Science.gov (United States)

1993-10-01

property of CocaCola Bottling Company, Fayetteville, North Carolina, of a value in excess of $100.00, in violation of Title 18 United States Code, Section...another, to-wit: a Cocacola soft drink machine, the amount of damage to said personal property being more than $200.00, in violation of North Carolina

77 FR 48542 - United States

Science.gov (United States)

2012-08-14

... litigation.'' United States v. Armour and Co., 402 U.S. 673, 681 (1971). Section 5 of the Clayton Act... relief in consent judgment that contained recitals in which defendants asserted their innocence); Armour...

United States Strategy for Mexico

National Research Council Canada - National Science Library

Centner, Robert C

2005-01-01

The security and stability of Mexico is of national interest to the United States, and a strong, effective alliance between the two countries is pivotal to our national defense strategy and economic prosperity...

CLIMATE CHANGE FUEL CELL PROGRAM UNITED STATES COAST GUARD AIR STATION CAPE COD BOURNE, MASSACHUSETTS

Energy Technology Data Exchange (ETDEWEB)

John K. Steckel Jr

2004-06-30

This report covers the first year of operation of a fuel cell power plant, installed by PPL Spectrum, Inc. (PPL) under contract with the United States Coast Guard (USCG), Research and Development Center (RDC). The fuel cell was installed at Air Station Cape Cod in Bourne, MA. The project had the support of the Massachusetts Technology Collaborative (MTC), the Department of Energy (DOE), and Keyspan Energy. PPL selected FuelCell Energy, Inc. (FCE) and its fuel cell model DFC{reg_sign}300 for the contract. Grant contributions were finalized and a contract between PPL and the USCG for the manufacture, installation, and first year's maintenance of the fuel cell was executed on September 24, 2001. As the prime contractor, PPL was responsible for all facets of the project. All the work was completed by PPL through various subcontracts, including the primary subcontract with FCE for the manufacture, delivery, and installation of the fuel cell. The manufacturing and design phases proceeded in a relatively timely manner for the first half of the project. However, during latter stages of manufacture and fuel cell testing, a variety of issues were encountered that ultimately resulted in several delivery delays, and a number of contract modifications. Final installation and field testing was completed in April and May 2003. Final acceptance of the fuel cell was completed on May 16, 2003. The fuel cell has operated successfully for more than one year. The unit achieved an availability rate of 96%, which exceeded expectations. The capacity factor was limited because the unit was set at 155 kW (versus a nameplate of 250 kW) due to the interconnection with the electric utility. There were 18 shutdowns during the first year and most were brief. The ability of this plant to operate in the island mode improved availability by 3 to 4%. Events that would normally be shutdowns were simply island mode events. The mean time between failure was calculated at 239 hours, or slightly

The optimal parameter design for a welding unit of manufacturing industry by Taguchi method and computer simulation

Energy Technology Data Exchange (ETDEWEB)

Zahraee, S.M.; Chegeni, A.; Toghtamish, A.

2016-07-01

Manufacturing systems include a complicated combination of resources, such as materials, labors, and machines. Hence, when the manufacturing systems are faced with a problem related to the availability of resources it is difficult to identify the root of the problem accurately and effectively. Managers and engineers in companies are trying to achieve a robust production line based on the maximum productivity. The main goal of this paper is to design a robust production line, taking productivity into account in the selected manufacturing industry. This paper presents the application of Taguchi method along with computer simulation for finding an optimum factor setting for three controllable factors, which are a number of welding machines, hydraulic machines, and cutting machines by analyzing the effect of noise factors in a selected manufacturing industry. Based on the final results, the optimal design parameter of welding unit of in the selected manufacturing industry will be obtained when factor A is located at level 2 and B and C are located at level 1. Therefore, maximum productive desirability is achieved when the number of welding machines, hydraulic machines, and cutting machines is equal to 17, 2, and 1, respectively. This paper has a significant role in designing a robust production line by considering the lowest cost and timely manner based on the Taguchi method. (Author)

The optimal parameter design for a welding unit of manufacturing industry by Taguchi method and computer simulation

Directory of Open Access Journals (Sweden)

Seyed Mojib Zahraee

2016-05-01

Full Text Available Purpose: Manufacturing systems include a complicated combination of resources, such as materials, labors, and machines. Hence, when the manufacturing systems are faced with a problem related to the availability of resources it is difficult to identify the root of the problem accurately and effectively. Managers and engineers in companies are trying to achieve a robust production line based on the maximum productivity. The main goal of this paper is to design a robust production line, taking productivity into account in the selected manufacturing industry. Design/methodology/approach: This paper presents the application of Taguchi method along with computer simulation for finding an optimum factor setting for three controllable factors, which are a number of welding machines, hydraulic machines, and cutting machines by analyzing the effect of noise factors in a selected manufacturing industry. Findings and Originality/value: Based on the final results, the optimal design parameter of welding unit of in the selected manufacturing industry will be obtained when factor A is located at level 2 and B and C are located at level 1. Therefore, maximum productive desirability is achieved when the number of welding machines, hydraulic machines, and cutting machines is equal to 17, 2, and 1, respectively. This paper has a significant role in designing a robust production line by considering the lowest cost and timely manner based on the Taguchi method.

NCHS - Injury Mortality: United States

Data.gov (United States)

U.S. Department of Health & Human Services — This dataset describes injury mortality in the United States beginning in 1999. Two concepts are included in the circumstances of an injury death: intent of injury...

Process development for the manufacturing of state-of-the-art spacer grids

Energy Technology Data Exchange (ETDEWEB)

Schebitz, Florian; Dietrich, Matthias [Advanced Nuclear Fuels GmbH, Karlstein (Germany)

2013-07-01

At the beginning it was questioned if 'time to market' is really important for the nuclear industry. The clear answer is YES. Even if the development times might be longer compared to projects in other industries it is still beneficial to use concurrent engineering. In the world wide network of manufacturing sites, Advanced Nuclear Fuels GmbH in Karlstein is quite often involved when the development of new processes is necessary. As ANF Karlstein is delivering products around the world the experience with different customer requirements supports an optimized solution in order to fulfill these principle requirements and to deliver state-of-the-art products like spacer grids. Continues feedback from process development already improves the first prototypes. In the meantime ANF Karlstein manufactured the components for both new fuel assembly designs which are introduced as a first set of Lead Fuel Assemblies. For the manufacturing of the next sets of spacer grids (for tests and next series of Lead Fuel Assemblies) the described processes will be used and further improved, so that an industrialized solution is available. (orig.)

Both Europe's and the United States' electrification

International Nuclear Information System (INIS)

Matly, M.

2006-01-01

While the United States quickly had the largest electrical indus in the world, electrification in rural areas ended about thirty years after most European countries. Public intervention is a deciding factor in completing electrification, and the late involvement by the American authorities explains the gap. However it would be wrong to oppose in Europe and in the United States a motivated public sector and little involved private companies. In both continents indeed, major private and public urban distributors were almost not involved in rural electrification processes, where local players prevailed: local communities around Europe, small and medium size business in some European countries such as France, co-operative companies in the United States. Additionally, there is an essential difference between electrification in Europe and in the United States. The former does not provide much more than lighting and its success leaves few traces in popular memories; the latter includes many facilities and services, changes the lives of rural populations and is celebrated a such. Whereas the colonial venture keep European economies away from their domestic markets, while in the United States the urban market growth contents large companies, the American co-operative movement is right to believe in the existence of a large electrical equipment market among farmers then considered poor and behind. It even uses the market to complete a more profitable and less costly electrification. Electricity stories that offer food for the thoughts of Third World decision makers and power companies, when they entrust most rural electrification to their large urban companies and deny the existence of a real equipment market in their own rural world. (author)

Asian Immigration: The View from the United States.

Science.gov (United States)

Gardner, Robert W.

1992-01-01

Examines contemporary Asian immigration to the United States from a U.S. perspective. Analyzes immigration policies and data on recent immigration from Asia. Discusses impacts concerning the United States and the immigrants themselves and speculates on future immigration. The composition of Asian immigration might change, and the number might…

26 CFR 1.956-2 - Definition of United States property.

Science.gov (United States)

2010-04-01

..., which is— (i) Tangible property (real or personal) located in the United States; (ii) Stock of a... year ending June 30, 1964, R Corporation's increase in earnings invested in United States property for... United States property during its taxable year 1965, S Corporation's increase in earnings invested in...

Licensed pertussis vaccines in the United States: History and current state

OpenAIRE

Klein, Nicola P

2014-01-01

The United States switched from whole cell to acellular pertussis vaccines in the 1990s following global concerns with the safety of the whole cell vaccines. Despite high levels of acellular pertussis vaccine coverage, the United States and other countries are experiencing large pertussis outbreaks. The aim of this article is to describe the historical context which led to acellular pertussis vaccine development, focusing on vaccines currently licensed in the US, and to review evidence that w...

Nations United: The United Nations, the United States, and the Global Campaign Against Terrorism. A Curriculum Unit & Video for Secondary Schools.

Science.gov (United States)

Houlihan, Christina; McLeod, Shannon

This curriculum unit and 1-hour videotape are designed to help students understand the purpose and functions of the United Nations (UN) and explore the relationship between the United Nations and the United States. The UN's role in the global counterterrorism campaign serves as a case study for the unit. The students are asked to develop a basic…

Managing Your Energy; An Energy Star Guide for Identifying Energy Savings in Manufacturing Plants

NARCIS (Netherlands)

Worrell, E.; Angelini, T.; Masanet, E.

2010-01-01

In the United States, industry spends over $100 billion annually to power its manufacturing plants. Companies also spend on maintenance, capital outlay, and energy services. Improving energy efficiency is vital to reduce these costs and increase earnings. Many cost-effective opportunities to reduce

Laser nano-manufacturing: state of the art and challenges

NARCIS (Netherlands)

Li, L.; Hong, M.; Schmidt, M.; Zhong, M.; Mashe, A.; Huis in 't veld, A.J.; Kovalenko, V.

2011-01-01

This paper provides an overview of advances in laser based nano-manufacturing technologies including surface nano-structure manufacturing, production of nano materials (nanoparticles, nanotubes and nanowires) and 3D nano-structures manufacture through multiple layer additive techniques and

Cloud Manufacturing Service Paradigm for Group Manufacturing Companies

Directory of Open Access Journals (Sweden)

Jingtao Zhou

2014-07-01

Full Text Available The continuous refinement of specialization requires that the group manufacturing company must be constantly focused on how to concentrate its core resources in special sphere to form its core competitive advantage. However, the resources in enterprise group are usually distributed in different subsidiary companies, which means they cannot be fully used, constraining the competition and development of the enterprise. Conducted as a response to a need for cloud manufacturing studies, systematic and detailed studies on cloud manufacturing schema for group companies are carried out in this paper. A new hybrid private clouds paradigm is proposed to meet the requirements of aggregation and centralized use of heterogeneous resources and business units distributed in different subsidiary companies. After the introduction of the cloud manufacturing paradigm for enterprise group and its architecture, this paper presents a derivation from the abstraction of paradigm and framework to the application of a practical evaluative working mechanism. In short, the paradigm establishes an effective working mechanism to translate collaborative business process composed by the activities into cloud manufacturing process composed by services so as to create a foundation resulting in mature traditional project monitoring and scheduling technologies being able to be used in cloud manufacturing project management.

Estimated United States Transportation Energy Use 2005

Energy Technology Data Exchange (ETDEWEB)

Smith, C A; Simon, A J; Belles, R D

2011-11-09

A flow chart depicting energy flow in the transportation sector of the United States economy in 2005 has been constructed from publicly available data and estimates of national energy use patterns. Approximately 31,000 trillion British Thermal Units (trBTUs) of energy were used throughout the United States in transportation activities. Vehicles used in these activities include automobiles, motorcycles, trucks, buses, airplanes, rail, and ships. The transportation sector is powered primarily by petroleum-derived fuels (gasoline, diesel and jet fuel). Biomass-derived fuels, electricity and natural gas-derived fuels are also used. The flow patterns represent a comprehensive systems view of energy used within the transportation sector.

United States of America National Report

International Nuclear Information System (INIS)

1992-01-01

The United States has produced this report as part of the preparations for the United Nations Conference on Environment and Development (UNCED) to be held in Brazil in June 1992. It summarizes this nation's efforts to protect and enhance the quality of the human environment in concert with its efforts to provide economic well-being during the two decades since the United Nations Conference on the Human Environment was held in Stockholm. The information presented in this report is primarily and deliberately retrospective. It is an attempt to portray the many human, economic and natural resources of the United States, to describe resource use and the principal national laws and programs established to protect these resources, and to analyze key issues on the agenda of UNCED. This analysis is presented in terms of past and present conditions and trends, measures of progress made in responding to the key issues, and a summary of government activities, underway or pending, to address ongoing or newly emerging national environmental and resource management problems

African Journals Online: United States Minor Outlying Islands

African Journals Online (AJOL)

African Journals Online: United States Minor Outlying Islands. Home > African Journals Online: United States Minor Outlying Islands. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Browse By Category · Browse Alphabetically · Browse By Country · List All Titles ...

An Estimate of Shallow, Low-Temperature Geothermal Resources of the United States: Preprint

Energy Technology Data Exchange (ETDEWEB)

Mullane, Michelle; Gleason, Michael; McCabe, Kevin; Mooney, Meghan; Reber, Timothy; Young, Katherine R.

2016-10-01

Low-temperature geothermal resources in the United States potentially hold an enormous quantity of thermal energy, useful for direct use in residential, commercial and industrial applications such as space and water heating, greenhouse warming, pool heating, aquaculture, and low-temperature manufacturing processes. Several studies published over the past 40 years have provided assessments of the resource potential for multiple types of low-temperature geothermal systems (e.g. hydrothermal convection, hydrothermal conduction, and enhanced geothermal systems) with varying temperature ranges and depths. This paper provides a summary and additional analysis of these assessments of shallow (= 3 km), low-temperature (30-150 degrees C) geothermal resources in the United States, suitable for use in direct-use applications. This analysis considers six types of geothermal systems, spanning both hydrothermal and enhanced geothermal systems (EGS). We outline the primary data sources and quantitative parameters used to describe resources in each of these categories, and present summary statistics of the total resources available. In sum, we find that low-temperature hydrothermal resources and EGS resources contain approximately 8 million and 800 million TWh of heat-in-place, respectively. In future work, these resource potential estimates will be used for modeling of the technical and market potential for direct-use geothermal applications for the U.S. Department of Energy's Geothermal Vision Study.

Refugee Status Required for Resettlement in the United States

Science.gov (United States)

2017-06-09

STATES REFUGEE ADMISSIONS PROGRAM FLOWCHART ...the American public’s concerns. 50 APPENDIX A UNITED STATES REFUGEE ADMISSIONS PROGRAM FLOWCHART Source: US Citizenship and Immigration...TITLE AND SUBTITLE Refugee Status Required for Resettlement in the United States 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

Latin America and the United States: What Do United States History Textbooks Tell Us?

Science.gov (United States)

Fleming, Dan B.

1982-01-01

Evaluates how U.S.-Latin American relations are presented in high school U.S. history textbooks. An examination of 10 textbooks published between 1977-81 revealed inadequate coverage of Latin American cultural diversity and United States foreign policy from the Latin American perspective. (AM)

Preparation of School Psychologists in the United States

Science.gov (United States)

Joyce-Beaulieu, Diana; Rossen, Eric

2014-01-01

School psychology in the United States continues to evolve in response to shifts in the country's demographic characteristics, an increasing focus on the importance of child mental health, together with health and education reforms. The landscape of school psychological services in the United States also is shaped through the changing roles and…

Manufacture of steam generator units and components for the AGR power stations at Heysham II and Torness

International Nuclear Information System (INIS)

Glasgow, J.R.; Parkin, K.

1984-01-01

The current AGR Steam Generator is a development of the successful once-through units supplied for the Oldbury Magnox and Hinkley B/Hunterston B AGR power stations. In this paper a brief outline of the evolution of the steam generator design from the earlier gas cooled reactor stations is presented. A description of the main items of fabrication development is given. The production facilities for the manufacture of the units are described. Reference is also made to some of the work on associated components. The early experience on the construction site of installation of the steam generators is briefly outlined. (author)

Manufacture of steam generator units and components for the AGR power stations at Heysham II and Torness

Energy Technology Data Exchange (ETDEWEB)

Glasgow, J R; Parkin, K [N.E.I. Nuclear Systems Ltd., Gateshead, Tyne and Wear (United Kingdom)

1984-07-01

The current AGR Steam Generator is a development of the successful once-through units supplied for the Oldbury Magnox and Hinkley B/Hunterston B AGR power stations. In this paper a brief outline of the evolution of the steam generator design from the earlier gas cooled reactor stations is presented. A description of the main items of fabrication development is given. The production facilities for the manufacture of the units are described. Reference is also made to some of the work on associated components. The early experience on the construction site of installation of the steam generators is briefly outlined. (author)

Marketing dietary supplements in the United States: A review of the requirements for new dietary ingredients

International Nuclear Information System (INIS)

Noonan, Chris; Patrick Noonan, W.

2006-01-01

Since the passage of the Dietary Supplement Health and Education Act in 1994, the marketplace for dietary supplements has experienced dramatic growth. New products have redefined the entire marketplace, and new ingredients are introduced to consumers at lightning speed. As part of this act, laws were passed to ensure the safety of new dietary ingredients introduced into the United States marketplace. But more than 11 years later, these laws are frequently misunderstood, and more frequently ignored. This article reviews the regulatory landscape of new dietary ingredients and defines the issues manufacturers must contend with to legally market dietary supplements with new dietary ingredients in the U.S

United States position on severe accidents

International Nuclear Information System (INIS)

Ross, D.F.

1988-01-01

The United States policy on severe accidents was published in 1985 for both new plant applications and for existing plants. Implementation of this policy is in progress. This policy, aided by a related safety goal policy and by analysis capabilities emerging from improved understanding of accident phenomenology, is viewed as a logical development from the pioneering work in the WASH-1400 Reactor Safety Study published by the United States Nuclear Regulatory Commission (NRC) in 1975. This work provided an estimate of the probability and consequences of severe accidents which, prior to that time, had been mostly evaluated by somewhat arbitrary assumptions dating back 30 years. The early history of severe accident evaluation is briefly summarized for the period 1957-1979. Then, the galvanizing action of Three Mile Island Unit 2 (TMI-2) on severe accident analysis, experimentation and regulation is reviewed. Expressions of US policy in the form of rulemaking, severe accident policy, safety research, safety goal policy and court decisions (on adequacy of safety) are discussed. Finally, the NRC policy as of March 1988 is stated, along with a prospective look at the next few years. (author). 19 refs

Understanding human trafficking in the United States.

Science.gov (United States)

Logan, T K; Walker, Robert; Hunt, Gretchen

2009-01-01

The topic of modern-day slavery or human trafficking has received increased media and national attention. However, to date there has been limited research on the nature and scope of human trafficking in the United States. This article describes and synthesizes nine reports that assess the U.S. service organizations' legal representative knowledge of, and experience with, human trafficking cases, as well as information from actual cases and media reports. This article has five main goals: (a) to define what human trafficking is, and is not; (b) to describe factors identified as contributing to vulnerability to being trafficked and keeping a person entrapped in the situation; (c) to examine how the crime of human trafficking differs from other kinds of crimes in the United States; (d) to explore how human trafficking victims are identified; and, (e) to provide recommendations to better address human trafficking in the United States.

Optimized manufacturable porous materials

DEFF Research Database (Denmark)

Andreassen, Erik; Andreasen, Casper Schousboe; Jensen, Jakob Søndergaard

Topology optimization has been used to design two-dimensional material structures with specific elastic properties, but optimized designs of three-dimensional material structures are more scarsely seen. Partly because it requires more computational power, and partly because it is a major challenge...... to include manufacturing constraints in the optimization. This work focuses on incorporating the manufacturability into the optimization procedure, allowing the resulting material structure to be manufactured directly using rapid manufacturing techniques, such as selective laser melting/sintering (SLM....../S). The available manufacturing methods are best suited for porous materials (one constituent and void), but the optimization procedure can easily include more constituents. The elasticity tensor is found from one unit cell using the homogenization method together with a standard finite element (FE) discretization...

42 CFR 410.175 - Alien absent from the United States.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Alien absent from the United States. 410.175... Alien absent from the United States. (a) Medicare does not pay Part B benefits for services furnished to... during the first full calendar month the alien is back in the United States. [53 FR 6634, Mar. 2, 1988] ...

Inventory of power plants in the United States. [By state within standard Federal Regions, using county codes

Energy Technology Data Exchange (ETDEWEB)

None

1977-12-01

The purpose of this inventory of power plants is to provide a ready reference for planners whose focus is on the state, standard Federal region, and/or national level. Thus the inventory is compiled alphabetically by state within standard Federal regions. The units are listed alphabetically within electric utility systems which in turn are listed alphabetically within states. The locations are identified to county level according to the Federal Information Processing Standards Publication Counties and County Equivalents of the States of the United States. Data compiled include existing and projected electrical generation units, jointly owned units, and projected construction units.

Manufacturing of 380/220 V 63 A power supply panel on UO2 kernel coating unit

International Nuclear Information System (INIS)

Triyono; Mudjiman, Supardjono; Hidayat, Nur

2013-01-01

The panel 380/220 Volts voltage source current 63 Amperes relay AC output on UO 2 kernel coating unit has been manufactured. The activities include: installation and function panel test. The electrical installation of load includes : 220 Volts temperature monitor/controller, 220 Volts scraber pump, 220 Volts vacuum pump, 220 Volts solenoid valve gas and 380 Volts induction furnace. The component of installation includes: 380 Volts earth leakage circuit breaker, 380 Volts relay AC, 220 Volts magnetic circuit breaker, 100/5 Amperes current transformator ratio, voltmeter, ampermeter and push button normally open-close and temperature monitor/control in the box size 70x50x20 cm. The testing of voltage source has been unload and full load to determine the performance of the tool. The result of manufacture and function test voltage source 380/220 Volts at the UO 2 kernel coating unit showed that: the voltage source can work without load and full load safely. The load includes: voltage 380-382 Volts current 4-4,1 Amperes of induction furnace, voltage 223 Volts current 0,5 Amperes of vacuum pump, voltage 223 Volts current 4 Amperes of scraber pump, voltage 223 Volts current 0,3 Amperes of solenoid valve gas and 222 Volts current 0,03 Amperes temperature monitor/control. (author)

Norovirus in the United States

Centers for Disease Control (CDC) Podcasts

2013-09-09

Dr. Aron Hall, a CDC epidemiologist specializing in norovirus, discusses the impact of norovirus in the United States.  Created: 9/9/2013 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 9/17/2013.

Fragmentation of Continental United States Forests

Science.gov (United States)

Kurt H. Riitters; James D. Wickham; Robert V. O' Neill; K. Bruce Jones; Elizabeth R. Smith; John W. Coulston; Timothy G. Wade; Jonathan H. Smith

2002-01-01

We report a multiple-scale analysis of forest fragmentation based on 30-m (0.09 ha pixel-1) land- cover maps for the conterminous United States. Each 0.09-ha unit of forest was classified according to fragmentation indexes measured within the surrounding landscape, for five landscape sizes including 2.25, 7.29, 65.61, 590.49, and 5314.41 ha....

Hearing Impairment Among Noise-Exposed Workers - United States, 2003-2012.

Science.gov (United States)

Masterson, Elizabeth A; Bushnell, P Timothy; Themann, Christa L; Morata, Thais C

2016-04-22

Hearing loss is the third most common chronic physical condition in the United States, and is more prevalent than diabetes or cancer (1). Occupational hearing loss, primarily caused by high noise exposure, is the most common U.S. work-related illness (2). Approximately 22 million U.S. workers are exposed to hazardous occupational noise (3). CDC compared the prevalence of hearing impairment within nine U.S. industry sectors using 1,413,789 noise-exposed worker audiograms from CDC's National Institute for Occupational Safety and Health (NIOSH) Occupational Hearing Loss Surveillance Project (4). CDC estimated the prevalence at six hearing impairment levels, measured in the better ear, and the impact on quality of life expressed as annual disability-adjusted life years (DALYs), as defined by the 2013 Global Burden of Disease (GBD) Study (5). The mining sector had the highest prevalence of workers with any hearing impairment, and with moderate or worse impairment, followed by the construction and manufacturing sectors. Hearing loss prevention, and early detection and intervention to avoid additional hearing loss, are critical to preserve worker quality of life.

Trial by jury in the United States

Directory of Open Access Journals (Sweden)

Lochhead Robert

2015-10-01

Full Text Available Th e Republic of Moldova is considering the adoption of trial by jury in select criminal cases. Th e following article is intended to contribute to the discussion of that proposal. Th e article will briefl y describe the history of juries under the English common law and as adopted by the United States. It will then outline some of the basic procedures in trials by jury as currently practiced in the United States federal court system.

CEDAW in the Eyes of the United States

Directory of Open Access Journals (Sweden)

Al Shraideh Saleh

2017-12-01

Full Text Available Despite the large number of reservations registered by Member countries, making it one of the, if not the, most heavily reserved human rights treaties; the Convention on the Elimination of All Forms of Discrimination Against Women (CEDAW has managed to achieve a very high rate of states’ membership [1]. Currently, 187 countries out of the 193 United Nations Members are parties to CEDAW [2]. What is strange to digest, however, is the fact that the United States is one of the seven countries that are yet to ratify the Convention [3]. This article provides an insight into the position of the United States from the ratification of CEDAW. It examines the merits of arguments made for and against the ratification and their rationale to provide a better understanding that explains what is considered by many as a buzzling stand of the United States from the Convention.

Global context for the United States Forest Sector in 2030

Science.gov (United States)

James Turner; Joseph Buongiorno; Shushuai Zhu; Jeffrey P. Prestemon

2005-01-01

The purpose of this study was to identify markets for, and competitors to, the United States forest industries in the next 30 years. The Global Forest Products Model was used to make predictions of international demand, supply, trade, and prices, conditional on the last RPA Timber Assessment projections for the United States. It was found that the United States, Japan...

A functional intranet for the United States Coast Guard Unit

OpenAIRE

Hannah, Robert Todd.

1998-01-01

Approved for public release; distribution in unlimited. This thesis describes the complete development process of a friendly functional Intranet for an operational United States Coast Guard (USCG) electronic Support Unit (ESU) in Alameda, California. The final product is suitable for immediate use. It may also be used as a prototype for future Intranet development efforts. The methodology used to develop a finished, working product provides the core subject matter for this thesis. The disc...

Residency training in the United States: What foreign medical ...

African Journals Online (AJOL)

FMGs) planning to pursue post-graduate residency training in the United States of America (USA). While the number of residency training positions is shrinking, and the number of United States graduates has steadily declined over the past ...

The state of amphibians in the United States

Science.gov (United States)

Muths, E.; Adams, M.J.; Grant, E.H.C.; Miller, D.; Corn, P.S.; Ball, L.C.

2012-01-01

More than 25 years ago, scientists began to identify unexplained declines in amphibian populations around the world. Much has been learned since then, but amphibian declines have not abated and the interactions among the various threats to amphibians are not clear. Amphibian decline is a problem of local, national, and international scope that can affect ecosystem function, biodiversity, and commerce. This fact sheet provides a snapshot of the state of the amphibians and introduces examples to illustrate the range of issues in the United States.

Inventory of power plants in the United States, 1993

International Nuclear Information System (INIS)

1994-12-01

The Inventory of Power Plants in the United States is prepared annually by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), U.S. Department of Energy (DOE). The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. Data summarized in this report are useful to a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended

Inventory of power plants in the United States, 1993

Energy Technology Data Exchange (ETDEWEB)

1994-12-01

The Inventory of Power Plants in the United States is prepared annually by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), U.S. Department of Energy (DOE). The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. Data summarized in this report are useful to a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended.

Use of Internet Search Data to Monitor Rotavirus Vaccine Impact in the United States, United Kingdom, and Mexico.

Science.gov (United States)

Shah, Minesh P; Lopman, Benjamin A; Tate, Jacqueline E; Harris, John; Esparza-Aguilar, Marcelino; Sanchez-Uribe, Edgar; Richardson, Vesta; Steiner, Claudia A; Parashar, Umesh D

2018-02-19

Previous studies have found a strong correlation between internet search and public health surveillance data. Less is known about how search data respond to public health interventions, such as vaccination, and the consistency of responses in different countries. In this study, we aimed to study the correlation between internet searches for "rotavirus" and rotavirus disease activity in the United States, United Kingdom, and Mexico before and after introduction of rotavirus vaccine. We compared time series of internet searches for "rotavirus" from Google Trends with rotavirus laboratory reports from the United States and United Kingdom and with hospitalizations for acute gastroenteritis in the United States and Mexico. Using time and location parameters, Google quantifies an internet query share (IQS) to measure the relative search volume for specific terms. We analyzed the correlation between IQS and laboratory and hospitalization data before and after national vaccine introductions. There was a strong positive correlation between the rotavirus IQS and laboratory reports in the United States (R2 = 0.79) and United Kingdom (R2 = 0.60) and between the rotavirus IQS and acute gastroenteritis hospitalizations in the United States (R2 = 0.87) and Mexico (R2 = 0.69) (P United States and by 70% (95% CI, 55%-86%) in Mexico. In the United Kingdom, there was a loss of seasonal variation after vaccine introduction. Rotavirus internet search data trends mirrored national rotavirus laboratory trends in the United States and United Kingdom and gastroenteritis-hospitalization data in the United States and Mexico; lower correlations were found after rotavirus vaccine introduction. Published by Oxford University Press on behalf of The Journal of the Pediatric Infectious Diseases Society 2017. This work is written by (a) US Government employee(s) and is in the public domain in the US.

76 FR 13978 - Proposed Information Collection; Comment Request; 2012 Economic Census Covering the Manufacturing...

Science.gov (United States)

2011-03-15

... essential information for government, business and the general public. The 2012 Economic Census covering the... Economic Census Covering the Manufacturing Sector AGENCY: U.S. Census Bureau. ACTION: Notice. SUMMARY: The... provider of timely, relevant and quality data about the people and economy of the United States. Economic...

Licensed pertussis vaccines in the United States. History and current state.

Science.gov (United States)

Klein, Nicola P

2014-01-01

The United States switched from whole cell to acellular pertussis vaccines in the 1990s following global concerns with the safety of the whole cell vaccines. Despite high levels of acellular pertussis vaccine coverage, the United States and other countries are experiencing large pertussis outbreaks. The aim of this article is to describe the historical context which led to acellular pertussis vaccine development, focusing on vaccines currently licensed in the US, and to review evidence that waning protection following licensed acellular pertussis vaccines have been significant factors in the widespread reappearance of pertussis.

The United States initiative for international radioactive source management (ISRM)

International Nuclear Information System (INIS)

Naraine, N.; Karhnak, J.

1999-01-01

The United States takes seriously the potential problems from uncontrolled radioactive sources. To address these problems, the United States Department of State is leading the development of an initiative for International Radioactive Source Management (ISRM). The Department of State, through a number of Federal and state agencies, regulatory bodies and private industry, will endeavor to provide coordinated support to the international community, particularly through IAEA, to assist in the development and implementation of risk-based clearance levels to support import/export of radioactive contaminated metals and the tracking, management, identification, remediation, and disposition of 'lost sources' entering nation states and targeted industries. The United States believes that the international control of radioactive sources is critical in avoiding wide-spread contamination of the world metal supply. Thus the initiative has four objectives: (1) Protect sources from becoming lost (Tracking management); (2) Identify primary locations where sources have been lost (Stop future losses); (3) Locate lost sources (monitor and retrieve); and (4) Educate and train (deploy knowledge and technology). A number of efforts already underway in the United States support the overall initiative. The EPA has provided a grant to the Conference of Radiation Program Control Directors (CRCPD) to develop a nation-wide program for the disposition of orphaned radioactive sources. This program now has internet visibility and a toll-free telephone number to call for assistance in the disposal of sources. The Nuclear Regulatory Commission (NRC), the Department of Energy (DOE), and other government agencies as well as private companies are assisting CRCPD in this program. The NRC has begun a program to improve control of radioactive sources in the United States, and also intends to promulgate a regulation defining conditions for the release of materials from licensed facilities. The DOE is

Antiabortion violence in the United States.

Science.gov (United States)

Russo, Jennefer A; Schumacher, Kristin L; Creinin, Mitchell D

2012-11-01

This study was conducted to determine if an association exists between the amount of harassment and violence directed against abortion providers and the restrictiveness of state laws relating to family planning. We used responses from a July 2010 survey of 357 abortion providers in 50 states to determine their experience of antiabortion harassment and violence. Their responses were grouped and analyzed in relation to a published grading of state laws in the United States (A, B, C, D and F) as they relate to restrictions on family planning services. Group by group comparison of respondents illustrates that the difference in the number of reported incidents of minor vandalism by group is statistically significant (A vs. C, p=.07; A vs. D, p=.017; A vs. F, p=.0002). Incidents of harassment follow a similar pattern. There were no differences noted overall for violence or major vandalism. Major violence, including eight murders, is a new occurrence in the last two decades. Harassment of abortion providers in the United States has an association with the restrictiveness of state abortion laws. In the last two decades, murder of abortion providers has become an unfortunate part of the violence. Copyright © 2012 Elsevier Inc. All rights reserved.

Masturbation in the United States.

Science.gov (United States)

Das, Aniruddha

2007-01-01

Using data from the nationally representative National Health and Social Life Survey, this study queried the correlates of masturbation in the United States in 1992. Among those aged 18-60, 38% (CI, 35-41) of women and 61% (CI, 57-65) of men reported any masturbation over the preceding year. The system of factors underlying masturbation was similar for both genders, consistent with a convergence in gender patterns of sexual expression in the United States. Among both women and men, masturbation responded to a stable sexualized personality pattern, catalyzed by early-life factors and manifested in current sexual traits. Strikingly, the masturbation-partnered sex linkage, often conceptualized either as compensating for unsatisfying sex or complementing a satisfactory sex life, appeared to be bimodal for both genders. For some, masturbation complemented an active and pleasurable sex life, while among others, it compensated for a lack of partnered sex or satisfaction in sex.

Research on Anoplophora glabripennis in the United States

Science.gov (United States)

Robert A. Haack

2003-01-01

In the mid-1990s it was estimated that more than 400 exotic (non-native) forest insects had already become established in the United States (HAACK and BYLER, 1993; MATTSON et al., 1994; NIEMELA and MATTSON, 1996). This number has continued to grow with new exotics discovered annually in the United States (HAACK, 2002; HAACK and POLAND, 2001; HAACK et al., 2002). One...

Mercury recycling in the United States in 2000

Science.gov (United States)

Brooks, William E.; Matos, Grecia R.

2005-01-01

Reclamation and recycling of mercury from used mercury- containing products and treatment of byproduct mercury from gold mining is vital to the continued, though declining, use of this metal. Mercury is reclaimed from mercury-containing waste by treatment in multistep high-temperature retorts-the mercury is volatized and then condensed for purification and sale. Some mercury-containing waste, however, may be landfilled, and landfilled material represents loss of a recyclable resource and a threat to the environment. Related issues include mercury disposal and waste management, toxicity and human health, and regulation of mercury releases in the environment. End-users of mercury-containing products may face fines and prosecution if these products are improperly recycled or not recycled. Local and State environmental regulations require adherence to the Resource Conservation and Recovery Act and the Comprehensive Environmental Response, Compensation, and Liability Act to regulate generation, treatment, and disposal of mercury-containing products. In the United States, several large companies and a number of smaller companies collect these products from a variety of sources and then reclaim and recycle the mercury. Because mercury has not been mined as a principal product in the United States since 1992, mercury reclamation from fabricated products has become the main source of mercury. Principal product mercury and byproduct mercury from mining operations are considered to be primary materials. Mercury may also be obtained as a byproduct from domestic or foreign gold-processing operations. In the early 1990s, U.S. manufacturers used an annual average that ranged from 500 to 600 metric tons of recycled and imported mercury for fabrication of automobile convenience switches, dental amalgam, fluorescent lamps, medical uses and thermometers, and thermostats. The amount now used for fabrication is estimated to be 200 metric tons per year or less. Much of the data on

Leading Causes of Death in Males United States, 2010

Science.gov (United States)

... What’s this? Submit What’s this? Submit Button Leading Causes of Death in Males and Females, United States Recommend on ... to current and previous listings for the leading causes of death for males and females in the United States. ...

76 FR 18198 - European Union-United States Atlantis Program

Science.gov (United States)

2011-04-01

... DEPARTMENT OF EDUCATION European Union-United States Atlantis Program AGENCY: Office of...)--Special Focus Competition: European Union-(EU) United States (U.S.) Atlantis Program Notice inviting... and Culture, European Commission for funding under a separate but parallel EU competition. Within this...

Development of Water Quality Modeling in the United States

Science.gov (United States)

This presentation describes historical trends in water quality model development in the United States, reviews current efforts, and projects promising future directions. Water quality modeling has a relatively long history in the United States. While its origins lie in the work...

Solar energy in the United States

International Nuclear Information System (INIS)

Ochoa, D.; Slaoui, A.; Soler, R.; Bermudez, V.

2009-01-01

Written by a group of five French experts who visited several research centres, innovating companies and solar power stations in the United States, this report first proposes an overview of solar energy in the United States, indicating and commenting the respective shares of different renewable energies in the production, focusing on the photovoltaic energy production and its RD sector. The second part presents industrial and research activities in the solar sector, and more specifically photovoltaic technologies (silicon and thin layer technology) and solar concentrators (thermal solar concentrators, photovoltaic concentrators). The last chapter presents the academic research activities in different universities (California Tech Beckman Institute, Stanford, National Renewable Energy Laboratory, Colorado School of Mines)

Outlooks for Wind Power in the United States: Drivers and Trends under a 2016 Policy Environment

Energy Technology Data Exchange (ETDEWEB)

Mai, Trieu [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lantz, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ho, Jonathan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Stehly, Tyler [National Renewable Energy Lab. (NREL), Golden, CO (United States); Heimiller, Donna [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-12-01

Over the past decade, wind power has become one of the fastest growing electricity generation sources in the United States. Despite this growth, the U.S. wind industry continues to experience year-to-year fluctuations across the manufacturing and supply chain as a result of dynamic market conditions and changing policy landscapes. Moreover, with advancing wind technologies, ever-changing fossil fuel prices, and evolving energy policies, the long-term future for wind power is highly uncertain. In this report, we present multiple outlooks for wind power in the United States, to explore the possibilities of future wind deployment. The future wind power outlooks presented rely on high-resolution wind resource data and advanced electric sector modeling capabilities to evaluate an array of potential scenarios of the U.S. electricity system. Scenario analysis is used to explore drivers, trends, and implications for wind power deployment over multiple periods through 2050. Specifically, we model 16 scenarios of wind deployment in the contiguous United States. These scenarios span a wide range of wind technology costs, natural gas prices, and future transmission expansion. We identify conditions with more consistent wind deployment after the production tax credit expires as well as drivers for more robust wind growth in the long run. Conversely, we highlight challenges to future wind deployment. We find that the degree to which wind technology costs decline can play an important role in future wind deployment, electric sector CO₂ emissions, and lowering allowance prices for the Clean Power Plan.

75 FR 22551 - United States Standards for Grades of Frozen Blueberries

Science.gov (United States)

2010-04-29

...] United States Standards for Grades of Frozen Blueberries AGENCY: Agricultural Marketing Service, USDA... United States Standards for Grades of Frozen Blueberries. After considering the comments received... . The United States Standards for Grades of Frozen Blueberries are available by accessing the AMS Web...

Where Money Mattered: Organizational and Economic Consequences of State Public School Expenditures in the United States: 1880-1940.

Science.gov (United States)

Balfanz, Robert

1997-01-01

Uses historical, state-level schooling data, manufacturing productivity measures, and quantitative research to examine relationships between changes in rate and distribution of public school expenditures, public schooling organization, and state-level economic growth from 1880-1940. Significant effects for per-student spending on school…

Eco-innovation Dynamics at a Large State-Owned Wind Turbine Manufacture in China

DEFF Research Database (Denmark)

Yang, Yan; YIN, Shoujun

This paper discloses the learning process and stakeholder relations in eco-innovation dynamics at a large state-owned wind turbine manufacture in China in the past 7 years. Based on an understanding of eco-innovation and eco-innovation dynamics, we propose an analytical framework of eco-innovatio......This paper discloses the learning process and stakeholder relations in eco-innovation dynamics at a large state-owned wind turbine manufacture in China in the past 7 years. Based on an understanding of eco-innovation and eco-innovation dynamics, we propose an analytical framework of eco......-innovation dynamics from a multi-perspective of learning, triple helix and path dependence. We find that, in case company’s developing wind turbine business: (1) individual and collective learning were characterized by a Do-Use-Interact mode in product innovation and assembly procedure innovation and diverse learning...... approaches were employed; (2)its product development, marketing strategy and stakeholder relations were considerably affected by central government and local government on policies, directives, regulations; (3) co-R&D with foreign companies provided it an important learning platform on product development...

77 FR 64031 - United States-Peru Trade Promotion Agreement

Science.gov (United States)

2012-10-18

... Trade Promotion Agreement AGENCIES: U.S. Customs and Border Protection, Department of Homeland Security... tariff treatment and other customs-related provisions of the United States-Peru Trade Promotion Agreement... other customs-related provisions of the United States-Peru Trade Promotion Agreement (PTPA). Please...

Inching toward incrementalism: federalism, devolution, and health policy in the United States and the United Kingdom.

Science.gov (United States)

Sparer, Michael S; France, George; Clinton, Chelsea

2011-02-01

In the United States, the recently enacted Patient Protection and Affordable Care Act of 2010 envisions a significant increase in federal oversight over the nation's health care system. At the same time, however, the legislation requires the states to play key roles in every aspect of the reform agenda (such as expanding Medicaid programs, creating insurance exchanges, and working with providers on delivery system reforms). The complicated intergovernmental partnerships that govern the nation's fragmented and decentralized system are likely to continue, albeit with greater federal oversight and control. But what about intergovernmental relations in the United Kingdom? What impact did the formal devolution of power in 1999 to Scotland, Wales, and Northern Ireland have on health policy in those nations, and in the United Kingdom more generally? Has devolution begun a political process in which health policy in the United Kingdom will, over time, become increasingly decentralized and fragmented, or will this "state of unions" retain its long-standing reputation as perhaps the most centralized of the European nations? In this article, we explore the federalist and intergovernmental implications of recent reforms in the United States and the United Kingdom, and we put forward the argument that political fragmentation (long-standing in the United States and just emerging in the United Kingdom) produces new intergovernmental partnerships that, in turn, produce incremental growth in overall government involvement in the health care arena. This is the impact of what can be called catalytic federalism.

THE UNITED STATES EDUCATIONAL SYSTEM

OpenAIRE

David Suriñach Fernández

2017-01-01

The United States educational system is very complex. Due to the fact a big number of agents take play of its regulation, the differences between the education from one State compared to the education from another, or even between school districts, might be considerable. The last two largest federal education initiatives, No Child Left Behind and Race to the Top, have had a huge impact on the American education system. The escalation of the standardized test throughout the whole country as a ...

When America Makes, America Works A Successful Public Private 3D Printing (Additive Manufacturing) Partnership

Science.gov (United States)

2016-10-01

community within a public-private partnership model to drive an innovation economy forward for the nation. Ad- ditive manufacturing is a game-changer...also is an incredibly powerful teaching tool to reinvigorate Science, Technology, Engineering and Math - ematics—or STEM—education in the United States

Inventory of Power Plants in the United States, October 1992

Energy Technology Data Exchange (ETDEWEB)

1993-10-27

The Inventory of Power Plants in the United States is prepared annually by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), US Department of Energy (DOE). The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. Data summarized in this report are useful to a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended. The report is organized into the following chapters: Year in Review, Operable Electric Generating Units, and Projected Electric Generating Unit Additions. Statistics presented in these chapters reflect the status of electric generating units as of December 31, 1992.

78 FR 63052 - United States-Panama Trade Promotion Agreement

Science.gov (United States)

2013-10-23

...-Panama Trade Promotion Agreement AGENCY: U.S. Customs and Border Protection, Department of Homeland... Trade Promotion Agreement entered into by the United States and the Republic of Panama. DATES: Interim... and the Republic of Panama (the ``Parties'') signed the United States-Panama Trade Promotion Agreement...

Manufacturing A Refrigerator with Heat Recovery Unit

Directory of Open Access Journals (Sweden)

Mustafa Mohammed Kadhim

2018-02-01

Full Text Available This study aims to exploite the rejected heating energy from condenser and benefit from it to reheat the foods and other materials. It can also be employed to improve the coefficient of performance of a refrigerator at the same time by using approximately the same consumption electrical energy used to operate the compressor and refrigerator in general. This idea has been implemented by manufacturing of a refrigerator with using additional part has the same metal and condenser pipe diameters but its surface area does not exceed 40% from total surface area of the condenser and its design as an insulated cabinet from all sides to prevent heat leakage through it and located between the compressor and the condenser. Small electrical fan has been added inside this cabinet to provide a suitable air circulation and a homogenous temperature distribution inside the cabinet space. It is expected that the super heating energy of refrigerant (R134a which comes out of the compressor would be removed  inside this cabinet and this insist to condensate the refrigerant (cooling fluid with a rate higher than that used in the normal refrigerator only. Three magnetic valves have been used in order to control the refrigerant flow in state of operation the refrigerator only or to gather with heating cabinet. To measure the temperatures at each process of the simple vapor compression refrigeration cycle, nine temperature sensors at input and output of each compressor, condenser and an evaporator in additional to input of cabinet and inside it and on evaporator surface have been provided. Five pressure gages have been used to measure the value of pressure and compare it for the two states of operation. The consumption of electrical energy  can be calculated by adding an ammeter and a voltmeter and compare between the consumption energy of both states. The obtained results show that there is an improvement in the coeffecient of performance in state of operation the

United States Military in Central Asia: Beyond Operation Enduring Freedom

Science.gov (United States)

2009-10-23

Malinowski , advocacy director for Human Rights Watch, stated, “the United States is most effective in promoting liberty around the world when people...26 U.S. President, The National Security Strategy of the United States of America, page? 27 Thomas Malinowski , “Testimony

31 CFR Appendix D to Subpart A of... - United States Secret Service

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false United States Secret Service D...—United States Secret Service 1. In general. This appendix applies to the United States Secret Service. 2. Public reading room. The United States Secret Service will provide a room on an ad hoc basis when...

76 FR 68271 - To Modify the Harmonized Tariff Schedule of the United States

Science.gov (United States)

2011-11-03

... the Convention and do not run counter to the national economic interest of the United States. I have... United States obligations under the Convention and do not run counter to the national economic interest of the United States. 7. On June 6, 2003, the United States and Chile entered into the United States...

Using Innovative Technologies for Manufacturing Rocket Engine Hardware

Science.gov (United States)

Betts, E. M.; Eddleman, D. E.; Reynolds, D. C.; Hardin, N. A.

2011-01-01

Many of the manufacturing techniques that are currently used for rocket engine component production are traditional methods that have been proven through years of experience and historical precedence. As the United States enters into the next space age where new launch vehicles are being designed and propulsion systems are being improved upon, it is sometimes necessary to adopt innovative techniques for manufacturing hardware. With a heavy emphasis on cost reduction and improvements in manufacturing time, rapid manufacturing techniques such as Direct Metal Laser Sintering (DMLS) are being adopted and evaluated for their use on NASA s Space Launch System (SLS) upper stage engine, J-2X, with hopes of employing this technology on a wide variety of future projects. DMLS has the potential to significantly reduce the processing time and cost of engine hardware, while achieving desirable material properties by using a layered powder metal manufacturing process in order to produce complex part geometries. Marshall Space Flight Center (MSFC) has recently hot-fire tested a J-2X gas generator (GG) discharge duct that was manufactured using DMLS. The duct was inspected and proof tested prior to the hot-fire test. Using a workhorse gas generator (WHGG) test fixture at MSFC's East Test Area, the duct was subjected to extreme J-2X hot gas environments during 7 tests for a total of 537 seconds of hot-fire time. The duct underwent extensive post-test evaluation and showed no signs of degradation. DMLS manufacturing has proven to be a viable option for manufacturing rocket engine hardware, and further development and use of this manufacturing method is recommended.

Human prion diseases in the United States.

Directory of Open Access Journals (Sweden)

Robert C Holman

Full Text Available BACKGROUND: Prion diseases are a family of rare, progressive, neurodegenerative disorders that affect humans and animals. The most common form of human prion disease, Creutzfeldt-Jakob disease (CJD, occurs worldwide. Variant CJD (vCJD, a recently emerged human prion disease, is a zoonotic foodborne disorder that occurs almost exclusively in countries with outbreaks of bovine spongiform encephalopathy. This study describes the occurrence and epidemiology of CJD and vCJD in the United States. METHODOLOGY/PRINCIPAL FINDINGS: Analysis of CJD and vCJD deaths using death certificates of US residents for 1979-2006, and those identified through other surveillance mechanisms during 1996-2008. Since CJD is invariably fatal and illness duration is usually less than one year, the CJD incidence is estimated as the death rate. During 1979 through 2006, an estimated 6,917 deaths with CJD as a cause of death were reported in the United States, an annual average of approximately 247 deaths (range 172-304 deaths. The average annual age-adjusted incidence for CJD was 0.97 per 1,000,000 persons. Most (61.8% of the CJD deaths occurred among persons >or=65 years of age for an average annual incidence of 4.8 per 1,000,000 persons in this population. Most deaths were among whites (94.6%; the age-adjusted incidence for whites was 2.7 times higher than that for blacks (1.04 and 0.40, respectively. Three patients who died since 2004 were reported with vCJD; epidemiologic evidence indicated that their infection was acquired outside of the United States. CONCLUSION/SIGNIFICANCE: Surveillance continues to show an annual CJD incidence rate of about 1 case per 1,000,000 persons and marked differences in CJD rates by age and race in the United States. Ongoing surveillance remains important for monitoring the stability of the CJD incidence rates, and detecting occurrences of vCJD and possibly other novel prion diseases in the United States.

The impact of TTIP agreement on the European Union-United States coal trade potential

Directory of Open Access Journals (Sweden)

Olkuski Tadeusz

2016-01-01

Full Text Available The main aim of the paper is to assess the impact of currently negotiated TTIP agreement (Transatlantic Trade and Investment Partnership on the use of hard coal in the EU and the US. Hard coal is the most important fuel in global electricity generation. This also applies to the United States, a leading manufacturer and exporter of this energy source. The US coal is exported to the EU market. The article presents the estimated exports of hard coal from the US to the EU. Due to the fact that price has a major impact on the size of exports, the paper presents the estimated prices, including freight costs, of power coal for the analyzed scenarios. According to one scenario, the US and European prices will be equalized (including freight costs by 2020, while from 2025 on the comparative advantage and competitiveness of the US hard coal will decrease. Taking into account the fact that the export of coal from the United States is free from customs duties, the acceptance of TIPP should not affect the currently existing trade between the two continents and the amount of exported coal. Nevertheless, the question of hard coal economy cannot be separated from other sectors of the energy market, which can be significantly affected by the future agreement.

The near-term impacts of carbon mitigation policies on manufacturing industries

International Nuclear Information System (INIS)

Morgenstern, Richard D.; Ho Mun; Shih, J.-S.; Zhang Xuehua

2004-01-01

Who pays for new policies to reduce carbon dioxide and other greenhouse gas emissions in the United States? This paper considers a slice of the question by examining the near-term impact on domestic manufacturing industries of both upstream (economy-wide) and downstream (electric power industry only) carbon mitigation policies. Detailed Census data on the electricity use of four-digit manufacturing industries are combined with input-output information on inter-industry purchases to paint a detailed picture of carbon use, including effects on final demand. Regional information on electricity supply and use by region is also incorporated. A relatively simple model is developed which yields estimates of the relative burdens within the manufacturing sector of alternative carbon policies. Overall, the principal conclusion is that within the manufacturing sector (which by definition excludes coal production and electricity generation), only a small number of industries would bear a disproportionate short-term burden of a carbon tax or similar policy. Not surprisingly, an electricity-only policy affects very different manufacturing industries than an economy-wide carbon tax

Competitive Electricity Market Regulation in the United States: A Primer

Energy Technology Data Exchange (ETDEWEB)

Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tian, Tian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chernyakhovskiy, Ilya [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chernyakhovskiy, Ilya [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miller, Mackay [National Grid, Warwick (United Kingdom)

2016-12-01

The electricity system in the United States is a complex mechanism where different technologies, jurisdictions and regulatory designs interact. Today, two major models for electricity commercialization operate in the United States. One is the regulated monopoly model, in which vertically integrated electricity providers are regulated by state commissions. The other is the competitive model, in which power producers can openly access transmission infrastructure and participate in wholesale electricity markets. This paper describes the origins, evolution, and current status of the regulations that enable competitive markets in the United States.

Sales Trends in Price-Discounted Cigarettes, Large Cigars, Little Cigars, and Cigarillos-United States, 2011-2016.

Science.gov (United States)

Wang, Teresa W; Falvey, Kyle; Gammon, Doris G; Loomis, Brett R; Kuiper, Nicole M; Rogers, Todd; King, Brian A

2017-12-15

Tobacco manufacturers continue to implement a range of pricing strategies to increase the affordability and consumption of tobacco products. To demonstrate the extent of retail- and brand-level price discounts at the point of sale, this study assessed national sales trends in price-discounted cigarettes, large cigars, little cigars, and cigarillos. Retail scanner data for tobacco product sales were obtained for convenience stores (C-store) and all-other-outlets-combined (AOC) from September 25, 2011, to January 9, 2016. The proportion of price-discounted sales, average nondiscounted unit price, and average discounted unit price were examined by product category and brand. JoinPoint regression was used to assess average monthly percentage change. Overall, price-discounted sales accounted for 11.3% of cigarette, 3.4% of large cigar, 4.1% of little cigar, and 3.9% of cigarillo sales. The average difference between nondiscounted and discounted prices was 25.5% (C-store) and 36.7% (AOC) for cigarettes; 11.0% (C-store) and 11.2% (AOC) for large cigars; 19.2% (C-store) and 9.6% (AOC) for little cigars; and 5.3% (C-store) and 14.7% (AOC) for cigarillos. Furthermore, price-discounted sales of top-selling tobacco brands comprised up to 36% of cigarette, 7.4% of large cigar, 7.7% of little cigar, and 4.2% of cigarillo unit sales. These findings highlight the use of price discounts by tobacco manufacturers to reduce the cost of cigarettes, large cigars, little cigars, and cigarillos to consumers. These sales patterns underscore the importance of sustained efforts to implement evidence-based strategies to increase prices and reduce availability and consumption of combustible tobacco in the United States. This study highlights the prevalence and provides a baseline of price-discounted cigarettes, large cigars, little cigars, and cigarillos. Surveillance of tobacco sales data, including state-level trends and additional product types, is critical for informing approaches to

Health, United States, 2012: Men's Health

Science.gov (United States)

... Mailing List Previous Reports Suggested Citation Related Sites Purchase Health, United States Behavioral Health Report Children’s ... with Internet Explorer may experience difficulties in directly accessing links to Excel files ...

Dengue Fever in the United States

Centers for Disease Control (CDC) Podcasts

Dr. Amesh Adalja, an associate at the Center for Biosecurity and clinical assistant professor at the University of Pittsburgh School, of Medicine, discusses dengue fever outbreaks in the United States.

15 CFR 971.209 - Processing outside the United States.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Processing outside the United States... THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Applications Contents § 971.209 Processing outside the United States. (a) Except as provided in this section...

Occurrence of 3-monochloropropanediol esters and glycidyl esters in commercial infant formulas in the United States.

Science.gov (United States)

Leigh, Jessica; MacMahon, Shaun

2017-03-01

This work presents occurrence data for fatty acid esters of 3-chloro-1,2-propanediol (3-MCPD) and glycidol in 98 infant formula samples purchased in the United States. These contaminants are considered potentially carcinogenic and/or genotoxic, making their presence in refined oils and foods a potential health risk. Recently, attention has focused on methodology to quantify MCPD and glycidyl esters in infant formula for risk-assessment purposes. Occurrence data for 3-MCPD and glycidyl esters were produced using a procedure for extracting fat from infant formula and an LC-MS/MS method for analysing fat extracts for intact esters. Infant formulas were produced by seven manufacturers, five of which use palm oil and/or palm olein in their formulations. In formulas containing palm/palm olein, concentrations for bound 3-MCPD and glycidol ranged from 0.021 to 0.92 mg kg - 1 (ppm) and from 3-MCPD and glycidol concentrations ranged from 0.072 to 0.16 mg kg - 1 (ppm) and from 0.005 to 0.15 mg kg - 1 (ppm), respectively. Although formulas from manufacturers A and G did not contain palm/palm olein, formulas from manufacturer E (containing palm olein) had the lowest concentrations of bound 3-MCPD and glycidol, demonstrating the effectiveness of industrial mitigation strategies.

Obesity: A United States Strategic Imperative

Science.gov (United States)

2013-04-01

States Department of Veterans Affairs 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) Dr. Thomas ...Army Ms. Karen Malebranche United States Department of Veterans Affairs Project Adviser Dr. Thomas Williams U.S. Army War...per American has increased by 57 pounds per year ( poultry representing 46 pounds).86 Surprisingly however, the percentage of calories from meat

Additive manufacturing: state-of-the-art and application framework

Directory of Open Access Journals (Sweden)

Vinícius Picanço Rodrigues

2017-09-01

Full Text Available Additive manufacturing encompasses a class of production processes with increasing applications in different areas and supply chains. Due to its flexibility for production in small batches and the versatility of materials and geometries, this technology is recognized as being capable of revolutionizing the production processes as well as changing production strategies that are currently employed. However, there are different technologies under the generic label of additive manufacturing, materials and application areas with different requirements. Given the growing importance of additive manufacturing as a production process, and also considering the need to have a better insight into the potential applications for driving research and development efforts, this article presents a proposal of organization for additive manufacturing applications in seven areas. Additionally, the article provides a panorama of the current development stage of this technology, with a review of its major technological variants. The results presented aim to serve as a basis to support driving initiatives in additive manufacturing in companies, development agencies and research institutions.

Cholera in the United States

Centers for Disease Control (CDC) Podcasts

2011-11-08

Anna Newton, Surveillance Epidemiologist at CDC, discusses cholera that was brought to the United States during an outbreak in Haiti and the Dominican Republic (Hispaniola).  Created: 11/8/2011 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 11/8/2011.

78 FR 5496 - Certain Paper Shredders, Certain Processes for Manufacturing or Relating to Same and Certain...

Science.gov (United States)

2013-01-25

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-863] Certain Paper Shredders, Certain Processes... importation of certain paper shredders, certain processes for manufacturing or relating to same and certain... the sale within the United States after importation of certain paper shredders, certain processes for...

The United States

International Nuclear Information System (INIS)

Art, R.J.

1991-01-01

This paper reports that at least in the national security arena, the outcomes of bureaucratic infighting and domestic political struggles are not determined wholly by what goes on with the state. Rather struggles among contending groups are greatly affected by what is perceived to be happening outside the nation. Because external conditions give greater potency to some domestic forces over other, the external environment is never neutral in its domestic impact. The decisions of the period 1950-53 discussed above illustrate the point. But so too do the decisions of 1947, 1960-61 and 1969-72. In the 1947 case, Soviet intransigence provoked US nuclear rearmament. In the 1960-61 case, extended deterrent considerations pushed the United States to preserve its again newly discovered nuclear superiority. In the 1969-72 case, a Soviet determination to remain equal forced US acceptance of nuclear equality. And perhaps the best evidence of all, the perpetuation of parity ended the US inclination to resort to nuclear brinkmanship. In each instance, concerns about relative position heavily affected nuclear choice. Finally, the events of the past three years testify to the effects of international events on domestic choice. Under the terms of the 1987 INF Treaty, the two superpowers decided to dismantle and destroy an entire class of missiles of intermediate range (500-3000 kilometers) that both had deployed in Europe in the 1970s and 1980s, and in their June 1990 joint statement on strategic nuclear weapons, President Gorbachev and Brush agreed to cut the number of Soviet and US long range nuclear forces by 30 per cent. This agreement marks a watershed in US-Soviet strategic arm negotiations because for the first time the United States and the Soviet Union agreed in principals to reduce the number of weapons aimed at one another. Between 1985 and 1990 the cold war was brought to a close

Progress of ITER full tungsten divertor technology qualification in Japan: Manufacturing full-scale plasma-facing unit prototypes

International Nuclear Information System (INIS)

Ezato, Koichiro; Suzuki, Satoshi; Seki, Yohji; Yamada, Hirokazu; Hirayama, Tomoyuki; Yokoyama, Kenji; Escourbiac, Frederic; Hirai, Takeshi

2016-01-01

Highlights: • JADA has demonstrated the feasibility of manufacturing the full-W plasma-facing units (W-PFU). • The surface profiles of the W monoblocks of the W-PFU prototypes on the test frame to mimic the support structure of the ITER OVT were examined by using an optical three-dimensional measurement system. The results show the most W monoblock surface in the target part locates within + 0.25 mm from the CAD data. • The strict profile control with the profile tolerance of ±0.3 mm is imposed on the OVT to prevent the leading edges of the W monoblocks from over-heating. • The present full-scale prototyping demonstrates to satisfy this requirement on the surface profile. • It can be concluded that the technical maturities of JADA and its suppliers are as high as to start series manufacturing the ITER divertor components. - Abstract: Japan Atomic Energy Agency (JAEA) is in progress for technology demonstration toward Full-tungsten (W) ITER divertor outer vertical target (OVT), especially, W monoblock technology that needs to withstand the repetitive heat load as high as 20 MW/m 2 for 10 s. Under the framework of the W divertor qualification program developed ITER organization, JAEA as Japanese Domestic Agency (JADA) manufactured seven full-scale plasma-facing unit (PFU) prototypes with the Japanese industries. Four prototypes that have 146 W monoblock joint with casted copper (Cu) interlayer passed successfully the ultrasonic testing. In the other three prototypes that have the different W/Cu interlayer joint, joint defects were found. The dimension measurements reveal the requirements of the gap between W monoblocks and the surface profile of PFU are feasible.

Progress of ITER full tungsten divertor technology qualification in Japan: Manufacturing full-scale plasma-facing unit prototypes

Energy Technology Data Exchange (ETDEWEB)

Ezato, Koichiro, E-mail: ezato.koichiro@jaea.go.jp [Department of ITER Project, Naka Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency (Japan); Suzuki, Satoshi; Seki, Yohji; Yamada, Hirokazu; Hirayama, Tomoyuki; Yokoyama, Kenji [Department of ITER Project, Naka Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency (Japan); Escourbiac, Frederic; Hirai, Takeshi [ITER Organization, route de vinon sur Verdon, 13067 St Paul lez Durance (France)

2016-11-01

Highlights: • JADA has demonstrated the feasibility of manufacturing the full-W plasma-facing units (W-PFU). • The surface profiles of the W monoblocks of the W-PFU prototypes on the test frame to mimic the support structure of the ITER OVT were examined by using an optical three-dimensional measurement system. The results show the most W monoblock surface in the target part locates within + 0.25 mm from the CAD data. • The strict profile control with the profile tolerance of ±0.3 mm is imposed on the OVT to prevent the leading edges of the W monoblocks from over-heating. • The present full-scale prototyping demonstrates to satisfy this requirement on the surface profile. • It can be concluded that the technical maturities of JADA and its suppliers are as high as to start series manufacturing the ITER divertor components. - Abstract: Japan Atomic Energy Agency (JAEA) is in progress for technology demonstration toward Full-tungsten (W) ITER divertor outer vertical target (OVT), especially, W monoblock technology that needs to withstand the repetitive heat load as high as 20 MW/m{sup 2} for 10 s. Under the framework of the W divertor qualification program developed ITER organization, JAEA as Japanese Domestic Agency (JADA) manufactured seven full-scale plasma-facing unit (PFU) prototypes with the Japanese industries. Four prototypes that have 146 W monoblock joint with casted copper (Cu) interlayer passed successfully the ultrasonic testing. In the other three prototypes that have the different W/Cu interlayer joint, joint defects were found. The dimension measurements reveal the requirements of the gap between W monoblocks and the surface profile of PFU are feasible.

Malaria Surveillance - United States, 2015.

Science.gov (United States)

Mace, Kimberly E; Arguin, Paul M; Tan, Kathrine R

2018-05-04

Malaria in humans is caused by intraerythrocytic protozoa of the genus Plasmodium. These parasites are transmitted by the bite of an infective female Anopheles species mosquito. The majority of malaria infections in the United States occur among persons who have traveled to regions with ongoing malaria transmission. However, malaria is occasionally acquired by persons who have not traveled out of the country through exposure to infected blood products, congenital transmission, laboratory exposure, or local mosquitoborne transmission. Malaria surveillance in the United States is conducted to provide information on its occurrence (e.g., temporal, geographic, and demographic), guide prevention and treatment recommendations for travelers and patients, and facilitate transmission control measures if locally acquired cases are identified. This report summarizes confirmed malaria cases in persons with onset of illness in 2015 and summarizes trends in previous years. Malaria cases diagnosed by blood film microscopy, polymerase chain reaction, or rapid diagnostic tests are reported to local and state health departments by health care providers or laboratory staff members. Case investigations are conducted by local and state health departments, and reports are transmitted to CDC through the National Malaria Surveillance System (NMSS), the National Notifiable Diseases Surveillance System (NNDSS), or direct CDC consultations. CDC reference laboratories provide diagnostic assistance and conduct antimalarial drug resistance marker testing on blood samples submitted by health care providers or local or state health departments. This report summarizes data from the integration of all NMSS and NNDSS cases, CDC reference laboratory reports, and CDC clinical consultations. CDC received reports of 1,517 confirmed malaria cases, including one congenital case, with an onset of symptoms in 2015 among persons who received their diagnoses in the United States. Although the number of

Malaria Surveillance - United States, 2014.

Science.gov (United States)

Mace, Kimberly E; Arguin, Paul M

2017-05-26

Malaria in humans is caused by intraerythrocytic protozoa of the genus Plasmodium. These parasites are transmitted by the bite of an infective female Anopheles mosquito. The majority of malaria infections in the United States occur among persons who have traveled to regions with ongoing malaria transmission. However, malaria is occasionally acquired by persons who have not traveled out of the country through exposure to infected blood products, congenital transmission, laboratory exposure, or local mosquitoborne transmission. Malaria surveillance in the United States is conducted to identify episodes of local transmission and to guide prevention recommendations for travelers. This report summarizes cases in persons with onset of illness in 2014 and trends during previous years. Malaria cases diagnosed by blood film, polymerase chain reaction, or rapid diagnostic tests are reported to local and state health departments by health care providers or laboratory staff. Case investigations are conducted by local and state health departments, and reports are transmitted to CDC through the National Malaria Surveillance System, National Notifiable Diseases Surveillance System, or direct CDC consultations. CDC conducts antimalarial drug resistance marker testing on blood samples submitted by health care providers or local or state health departments. Data from these reporting systems serve as the basis for this report. CDC received reports of 1,724 confirmed malaria cases, including one congenital case and two cryptic cases, with onset of symptoms in 2014 among persons in the United States. The number of confirmed cases in 2014 is consistent with the number of confirmed cases reported in 2013 (n = 1,741; this number has been updated from a previous publication to account for delayed reporting for persons with symptom onset occurring in late 2013). Plasmodium falciparum, P. vivax, P. ovale, and P. malariae were identified in 66.1%, 13.3%, 5.2%, and 2.7% of cases, respectively

26 CFR 1.993-7 - Definition of United States.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Definition of United States. 1.993-7 Section 1.993-7 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Domestic International Sales Corporations § 1.993-7 Definition of United States...

26 CFR 49.4261-5 - Payments made outside the United States.

Science.gov (United States)

2010-04-01

... travel under section 4262(b), the tax imposed by section 4261(b), shall not apply unless the... made outside the United States for one-way or round-trip transportation between a point within the United States and a point outside the United States. (b) Transportation between two or more points in the...

42 CFR 455.21 - Cooperation with State Medicaid fraud control units.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Cooperation with State Medicaid fraud control units... Detection and Investigation Program § 455.21 Cooperation with State Medicaid fraud control units. In a State with a Medicaid fraud control unit established and certified under subpart C of this part, (a) The...

Low birth weight in the United States.

Science.gov (United States)

Goldenberg, Robert L; Culhane, Jennifer F

2007-02-01

Pregnancy outcomes in the United States and other developed countries are considerably better than those in many developing countries. However, adverse pregnancy outcomes are generally more common in the United States than in other developed countries. Low-birth-weight infants, born after a preterm birth or secondary to intrauterine growth restriction, account for much of the increased morbidity, mortality, and cost. Wide disparities exist in both preterm birth and growth restriction among different population groups. Poor and black women, for example, have twice the preterm birth rate and higher rates of growth restriction than do most other women. Low birth weight in general is thought to place the infant at greater risk of later adult chronic medical conditions, such as diabetes, hypertension, and heart disease. Of interest, maternal thinness is a strong predictor of both preterm birth and fetal growth restriction. However, in the United States, several nutritional interventions, including high-protein diets, caloric supplementation, calcium and iron supplementation, and various other vitamin and mineral supplementations, have not generally reduced preterm birth or growth restriction. Bacterial intrauterine infections play an important role in the etiology of the earliest preterm births, but, at least to date, antibiotic treatment either before labor for risk factors such as bacterial vaginosis or during preterm labor have not consistently reduced the preterm birth rate. Most interventions have failed to reduce preterm birth or growth restriction. The substantial improvement in newborn survival in the United States over the past several decades is mostly due to better access to improved neonatal care for low-birth-weight infants.

31 CFR 594.315 - United States person; U.S. person.

Science.gov (United States)

2010-07-01

... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS General Definitions § 594.315 United States person; U.S. person. The term United States person or...

Economics of Future Growth in Photovoltaics Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Basore, Paul A.; Chung, Donald; Buonassisi, Tonio

2015-06-14

The past decade's record of growth in the photovoltaics manufacturing industry indicates that global investment in manufacturing capacity for photovoltaic modules tends to increase in proportion to the size of the industry. The slope of this proportionality determines how fast the industry will grow in the future. Two key parameters determine this slope. One is the annual global investment in manufacturing capacity normalized to the manufacturing capacity for the previous year (capacity-normalized capital investment rate, CapIR, units $/W). The other is how much capital investment is required for each watt of annual manufacturing capacity, normalized to the service life of the assets (capacity-normalized capital demand rate, CapDR, units $/W). If these two parameters remain unchanged from the values they have held for the past few years, global manufacturing capacity will peak in the next few years and then decline. However, it only takes a small improvement in CapIR to ensure future growth in photovoltaics. Any accompanying improvement in CapDR will accelerate that growth.

Professional Training in Software Engineering: A Critical Need in the United States

Directory of Open Access Journals (Sweden)

Jennifer Waldrow

2012-06-01

Full Text Available The software is related to almost every aspect of daily life: manufacturing, banking, travel, communications, defense, medicine, research, government, education, entertainment, law ... Is an essential part of military systems and is used in all civilian sectors, including safety and mission critical. Moreover, the complexity of many of these systems has increased exponentially in recent decades and the software has become an essential component for all of them. Unfortunately, the "systems of higher education", in almost all countries have not kept pace with these changes. The current science and engineering programs, both undergraduate and graduate, they need to incorporate more training in Software Engineering. It is especially true in areas such as aerospace engineering, because these systems are highly dependent on computer, information, communications and software. This article presents an analysis of the current situation of the United States in what has to do with software engineering training that receive and require the aerospace engineers.

Stigma and abortion complications in the United States.

Science.gov (United States)

Harris, Lisa H

2012-12-01

Abortion is highly stigmatized in the United States and elsewhere. As a result, many women who seek or undergo abortion keep their decision a secret. In many regions of the world, stigma is a recognized contributor to maternal morbidity and mortality from unsafe abortion, even when abortion is legal. Women may self-induce abortion in ways that are dangerous, or seek unsafe clandestine abortion from inadequately trained health care providers out of fear that their sexual activity, pregnancy, or abortion will be exposed if they present to a safe, licensed facility. However, unsafe abortion rarely occurs in the United States, and accordingly, stigma as a cause of unsafe abortion in the United States context has not been described. I consider the relationship of stigma to two serious abortion complications experienced by U.S. patients. Both patients wished to keep their abortion decision a secret from family and friends, and in both cases, their inability to disclose their abortion contributed to life-threatening complications. The experiences of these patients suggest that availability of legal abortion services in the United States may not be enough to keep all women safe. The cases also challenge the rhetoric that "abortion hurts women," suggesting instead that abortion stigma hurts women.

The voluntary safeguards offer of the United States

International Nuclear Information System (INIS)

Houck, F.S.

1985-01-01

During negotiations of the Treaty on the Non-Proliferation of Nuclear Weapons (NPT) concerns were expressed by non-nuclear-weapon States that their acceptance of Agency safeguards would put them at a disadvantage vis-a-vis the nuclear-weapon States. To allay these concerns, the United States and the United Kingdom in December 1967 made voluntary offers to accept Agency safeguards on their peaceful nuclear activities. Subsequently, France made a voluntary offer, the safeguards agreement for which was approved by the IAEA Board of Governors in February 1978, with a view to encouraging acceptance of Agency safeguards by additional States. More recently, in February 1985 the Board approved the safeguards agreement for the voluntary offer of the USSR, made inter alia to encourage further acceptance of Agency safeguards. These safeguards agreements with nuclear-weapon-States have two important features in common: Namely, they result from voluntary offers to accept safeguards rather than from multilateral or bilateral undertakings, and they give the Agency the right but generally not an obligation to apply its safeguards. The agreements differ in certain respects, the most noteworthy of which is the scope of the nuclear activities covered by each offer. The agreements of the United States and United Kingdom are the broadest, covering all peaceful nuclear activities in each country. The safeguards agreement for the US voluntary offer has been in force since December 1980. Now is an appropriate time to review the experience with the agreement's implementation during its first four years, as well as its history and salient features

United States Navy DL Perspective

Science.gov (United States)

2010-08-10

United States Navy DL Perspective CAPT Hank Reeves Navy eLearning Project Director 10 August 2010 Report Documentation Page Form ApprovedOMB No...Marine Corps (USMC) Navy eLearning Ongoing Shared with USMC, Coast Guard 9 NeL Help Site https://ile-help.nko.navy.mil/ile/ https://s-ile

Emerging technology: A key enabler for modernizing pharmaceutical manufacturing and advancing product quality.

Science.gov (United States)

O'Connor, Thomas F; Yu, Lawrence X; Lee, Sau L

2016-07-25

Issues in product quality have produced recalls and caused drug shortages in United States (U.S.) in the past few years. These quality issues were often due to outdated manufacturing technologies and equipment as well as lack of an effective quality management system. To ensure consistent supply of safe, effective and high-quality drug products available to the patients, the U.S. Food and Drug Administration (FDA) supports modernizing pharmaceutical manufacturing for improvements in product quality. Specifically, five new initiatives are proposed here to achieve this goal. They include: (i) advancing regulatory science for pharmaceutical manufacturing; (ii) establishing a public-private institute for pharmaceutical manufacturing innovation; (iii) creating incentives for investment in the technological upgrade of manufacturing processes and facilities; (iv) leveraging external expertise for regulatory quality assessment of emerging technologies; and (v) promoting the international harmonization of approaches for expediting the global adoption of emerging technologies. Published by Elsevier B.V.

26 CFR 1.953-2 - Actual United States risks.

Science.gov (United States)

2010-04-01

... being the promotion of such sales to United States retail outlets by advertising in trade publications... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Actual United States risks. 1.953-2 Section 1.953-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX...

31 CFR 595.315 - United States person; U.S. person.

Science.gov (United States)

2010-07-01

... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM SANCTIONS REGULATIONS General Definitions § 595.315 United States person; U.S. person. The term United States person or U.S...

United States Interagency Elevation Inventory (USIEI)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The U.S. Interagency Elevation Inventory displays high-accuracy topographic and bathymetric data for the United States and its territories. The project is a...

Comparison of Plastic Surgery Residency Training in United States and China.

Science.gov (United States)

Zheng, Jianmin; Zhang, Boheng; Yin, Yiqing; Fang, Taolin; Wei, Ning; Lineaweaver, William C; Zhang, Feng

2015-12-01

Residency training is internationally recognized as the only way for the physicians to be qualified to practice independently. China has instituted a new residency training program for the specialty of plastic surgery. Meanwhile, plastic surgery residency training programs in the United States are presently in a transition because of restricted work hours. The purpose of this study is to compare the current characteristics of plastic surgery residency training in 2 countries. Flow path, structure, curriculum, operative experience, research, and evaluation of training in 2 countries were measured. The number of required cases was compared quantitatively whereas other aspects were compared qualitatively. Plastic surgery residency training programs in 2 countries differ regarding specific characteristics. Requirements to become a plastic surgery resident in the United States are more rigorous. Ownership structure of the regulatory agency for residency training in 2 countries is diverse. Training duration in the United States is more flexible. Clinical and research training is more practical and the method of evaluation of residency training is more reasonable in the United States. The job opportunities after residency differ substantially between 2 countries. Not every resident has a chance to be an independent surgeon and would require much more training time in China than it does in the United States. Plastic surgery residency training programs in the United States and China have their unique characteristics. The training programs in the United States are more standardized. Both the United States and China may complement each other to create training programs that will ultimately provide high-quality care for all people.

19 CFR 10.46 - Articles for the United States.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Articles for the United States. 10.46 Section 10... THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Articles for Institutions § 10.46 Articles for the United States. Pursuant to subheadings 9808.00.10 and 9808...

Did technology shocks drive the great depression? Explaining cyclical productivity movements in US manufacturing, 1919-1939

NARCIS (Netherlands)

Inklaar, Robert; de Jong, Herman; Gouma, Reitze

2011-01-01

Technology shocks and declining productivity have been advanced as important factors driving the Great Depression in the United States, based on real business cycle theory. We estimate an improved measure of technology for interwar manufacturing, using data from the U.S. census reports. There is

26 CFR 1.864-2 - Trade or business within the United States.

Science.gov (United States)

2010-04-01

... States, as his agent to effect transactions in the United States in stocks and securities for the account... A ordinarily effects transactions in the United States in stocks or securities. Under the agency..., effects transactions in the United States in stocks or securities for the partnership's own account or...

MARKETING MIX STRATEGIES OF SMALL MANUFACTURERS OF INDIA: PUNJAB EXPERIENCE

Directory of Open Access Journals (Sweden)

Kumar GAUTAM

2011-01-01

Full Text Available The aim of the paper is to study the product planning and positioning, factors influencing their price decision, selection of distribution and media channels by the Small-Scale manufactures in the leading industrial state of Punjab. In the era of globalization Small manufacturers are facing lot of problems in areas of marketing mix such as product planning and positioning, pricing and distribution issues. The entrepreneur’s perception relating to these various issues have been highlighted in this paper. Total 173 units manufacturing textiles, bicycle and bicycle parts, food products and beverages and leather and leather products have been surveyed. A number of statements indicating the marketing mix issues have been developed and the respondents were asked to express their level of agreement/disagreement with these statements on five-point Likert scale. Kruskal-Wallis test has been applied to know the significant differences among the respondents relating to different industries, age and turnover groups with respect to these statements. The test has been applied at assumed p-value =0.05. The statements with less than 0.05 p-value are considered significant and those with p-value more than the assumed value are considered to be insignificant. The major finding reveals that small manufacturers are not using well versed with the marketing mix techniques and do not use latest marketing tool such as e-marketing or web marketing. The promotion of the products by advertising is not prevalent among these units.

Opportunities for development of local forest markets: the case of Amish furniture manufacturing

Science.gov (United States)

Matt Bumgardner; Gary Graham; Charles. Goebel

2012-01-01

A dramatic decline in the production of hardwood furniture in the United States has had profound impacts on employment and hardwood markets. Against this backdrop, the Amish-based furniture manufacturing cluster in Ohio has expanded and hardwood lumber consumption by the cluster is significant. Recent research suggests that 71 percent of firms in the cluster expanded...

Solid-State Additive Manufacturing for Heat Exchangers

Science.gov (United States)

Norfolk, Mark; Johnson, Hilary

2015-03-01

Energy densities in devices are increasing across many industries including power generation, high power electronics, manufacturing, and automotive. Increasingly, there is a need for very high efficiency thermal management devices that can pull heat out of a small area at higher and higher rates. Metal additive manufacturing (AM) technologies have the promise of creating parts with complex internal geometries required for integral thermal management. However, this goal has not been met due to constraints in fusion-based metal 3D printers. This work presents a new strategy for metal AM of heat exchangers using an ultrasonic sheet lamination approach.

VARIANTS OF DETERMINING THE MANUFACTURING COST OF A PRODUCT IN A PRODUCTION UNIT IN THE LIGHT OF BALANCE SHEET LAW

Directory of Open Access Journals (Sweden)

Marzena STROJEK‐FILUS

2014-01-01

Full Text Available The category of the manufacturing cost of a product is one of the most important ones from the point of view of proper valuation of the assets of a production unit, costs of its operations as well as pricing decisions. This article presents the problem of determining the manufacturing cost of a product in terms of balance sheet law. It has been shown that in order to determine this value various methods and options are allowed by this law, by means of which different values of manufacturing cost of a product are obtained. The importance of a proper selection of an allocation key in setilement of indirect production costs has been highlighted as well as the results of using, in certain cases, approved simplifications in the balance sheet law when determining the manufacturing cost of products have been demonstrated. The problem presented in this article is crucial from the point of view of an organization and management of production as well as managerial decision‐making in a company in the area of design of products and processes.

Taxation of United States general aviation

Science.gov (United States)

Sobieralski, Joseph Bernard

General aviation in the United States has been an important part of the economy and American life. General aviation is defined as all flying excluding military and scheduled airline operations, and is utilized in many areas of our society. The majority of aircraft operations and airports in the United States are categorized as general aviation, and general aviation contributes more than one percent to the United States gross domestic product each year. Despite the many benefits of general aviation, the lead emissions from aviation gasoline consumption are of great concern. General aviation emits over half the lead emissions in the United States or over 630 tons in 2005. The other significant negative externality attributed to general aviation usage is aircraft accidents. General aviation accidents have caused over 8000 fatalities over the period 1994-2006. A recent Federal Aviation Administration proposed increase in the aviation gasoline tax from 19.4 to 70.1 cents per gallon has renewed interest in better understanding the implications of such a tax increase as well as the possible optimal rate of taxation. Few studies have examined aviation fuel elasticities and all have failed to study general aviation fuel elasticities. Chapter one fills that gap and examines the elasticity of aviation gasoline consumption in United States general aviation. Utilizing aggregate time series and dynamic panel data, the price and income elasticities of demand are estimated. The price elasticity of demand for aviation gasoline is estimated to range from -0.093 to -0.185 in the short-run and from -0.132 to -0.303 in the long-run. These results prove to be similar in magnitude to automobile gasoline elasticities and therefore tax policies could more closely mirror those of automobile tax policies. The second chapter examines the costs associated with general aviation accidents. Given the large number of general aviation operations as well as the large number of fatalities and

Analysis of United States' Broadband Policy

National Research Council Canada - National Science Library

Uzarski, Joel S

2007-01-01

.... With every month that passes, the United States fails to close the gap in the digital divide both inside its borders as well as among the other countries that lead the world in broadband penetration...

Anti-Terrorism Authority Under the Laws of the United Kingdom and the United States

National Research Council Canada - National Science Library

Feikert, Clare; Doyle, Charles

2006-01-01

This is a comparison of the laws of the United Kingdom and of the United States that govern criminal and intelligence investigations of terrorist activities Both systems rely upon a series of statutory authorizations...

Intelligent Manufacturing in the Context of Industry 4.0: A Review

Directory of Open Access Journals (Sweden)

Ray Y. Zhong

2017-10-01

Full Text Available Our next generation of industry—Industry 4.0—holds the promise of increased flexibility in manufacturing, along with mass customization, better quality, and improved productivity. It thus enables companies to cope with the challenges of producing increasingly individualized products with a short lead-time to market and higher quality. Intelligent manufacturing plays an important role in Industry 4.0. Typical resources are converted into intelligent objects so that they are able to sense, act, and behave within a smart environment. In order to fully understand intelligent manufacturing in the context of Industry 4.0, this paper provides a comprehensive review of associated topics such as intelligent manufacturing, Internet of Things (IoT-enabled manufacturing, and cloud manufacturing. Similarities and differences in these topics are highlighted based on our analysis. We also review key technologies such as the IoT, cyber-physical systems (CPSs, cloud computing, big data analytics (BDA, and information and communications technology (ICT that are used to enable intelligent manufacturing. Next, we describe worldwide movements in intelligent manufacturing, including governmental strategic plans from different countries and strategic plans from major international companies in the European Union, United States, Japan, and China. Finally, we present current challenges and future research directions. The concepts discussed in this paper will spark new ideas in the effort to realize the much-anticipated Fourth Industrial Revolution.

76 FR 38700 - United States, et al.

Science.gov (United States)

2011-07-01

... prices in advertisements, in-store displays, and online. Consumer World believes these rules should be... has ruled on that motion. I. Procedural History The United States and seven Plaintiff States filed the... Restraints result in higher merchant costs, and merchants generally pass costs on to consumers, retail prices...

Prevalence and Level of Listeria monocytogenes in Ice Cream Linked to a Listeriosis Outbreak in the United States.

Science.gov (United States)

Chen, Y I; Burall, Laurel S; Macarisin, Dumitru; Pouillot, Régis; Strain, Errol; DE Jesus, Antonio J; Laasri, Anna; Wang, Hua; Ali, Laila; Tatavarthy, Aparna; Zhang, Guodong; Hu, Lijun; Day, James; Kang, Jihun; Sahu, Surasri; Srinivasan, Devayani; Klontz, Karl; Parish, Mickey; Evans, Peter S; Brown, Eric W; Hammack, Thomas S; Zink, Donald L; Datta, Atin R

2016-11-01

A most-probable-number (MPN) method was used to enumerate Listeria monocytogenes in 2,320 commercial ice cream scoops manufactured on a production line that was implicated in a 2015 listeriosis outbreak in the United States. The analyzed samples were collected from seven lots produced in November 2014, December 2014, January 2015, and March 2015. L. monocytogenes was detected in 99% (2,307 of 2,320) of the tested samples (lower limit of detection, 0.03 MPN/g), 92% of which were contaminated at ice cream products linked to a listeriosis outbreak provided a unique data set for further understanding the risk associated with L. monocytogenes contamination for highly susceptible populations.

United States Automotive Materials Partnership LLC (USAMP)

Energy Technology Data Exchange (ETDEWEB)

United States Automotive Materials Partnership

2011-01-31

The United States Automotive Materials Partnership LLC (USAMP) was formed in 1993 as a partnership between Chrysler Corporation, Ford Motor Company, and General Motors Corporation. Since then the U.S. Department of Energy (DOE) has supported its activities with funding and technical support. The mission of the USAMP is to conduct vehicle-oriented research and development in materials and materials processing to improve the competitiveness of the U.S. Auto Industry. Its specific goals are: (1) To conduct joint research to further the development of lightweight materials for improved automotive fuel economy; and (2) To work with the Federal government to explore opportunities for cooperative programs with the national laboratories, Federal agencies such as the DOE and universities. As a major component of the DOE's Office of FreedomCAR and Vehicle Technologies Program (FCVT) collaboration with the USAMP, the Automotive Lightweighting Materials (ALM) program focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. The FCVT was announced in FY 2002 and implemented in FY 2003, as a successor of the Partnership for a New Generation of Vehicles (PNGV), largely addressed under the first Cooperative Agreement. This second USAMP Cooperative Agreement with the DOE has expanded a unique and valuable framework for collaboratively directing industry and government research efforts toward the development of technologies capable of solving important societal problems related to automobile transportation. USAMP efforts are conducted by the domestic automobile manufacturers, in collaboration with materials and manufacturing suppliers, national laboratories, universities, and other technology or trade organizations. These interactions provide a direct route for implementing newly

75 FR 10561 - Pricing for 2010 United States Mint America the Beautiful QuartersTM

Science.gov (United States)

2010-03-08

... DEPARTMENT OF THE TREASURY United States Mint Pricing for 2010 United States Mint America the Beautiful Quarters\\TM\\ Two-Roll Set, etc. AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of the 2010 United States Mint America...

Rapid Time Response: A solution for Manufacturing Issue

Directory of Open Access Journals (Sweden)

Norazlin N.

2017-01-01

Full Text Available Respond time in manufacturing give the major impact that able to contribute too many manufacturing issues. Based on two worst case scenario occurred where Toyota in 2009 made a massive vehicles call due to car complexity of 11 major models and over 9 million vehicles. The recalls cost at least $2 billion in cost of repair, lost deals and result in lost 5% of its market share in United State of America, while A380 was reported on missing target in new production and leads to delayed market entry due to their weak product life cycle management (PLM. These cases give a sign to all industries to possess and optimize the facilities for better traceability in shortest time period. In Industry 4.0, the traceability and time respond become the factors for high performance manufacturing and rapid time respond able to expedite the traceability process and strengthen the communication level between man, machine and management. The round trip time (RTT experiment gives variant time respond between two difference operating system for intra and inter-platform signal. If this rapid time respond is adopted in any manufacturing process, the delay in traceability on every issue that lead to losses can be successfully avoided.

78 FR 77103 - United States Travel and Tourism Advisory Board

Science.gov (United States)

2013-12-20

... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism... extended deadline for application for membership on the United States Travel and Tourism Advisory Board... Travel and Tourism Advisory Board (Board). The November 25, 2013 notice provided that all applications...

State of pine decline in the southeastern United States

Science.gov (United States)

Lori Eckhardt; Mary Anne Sword Sayer; Don Imm

2010-01-01

Pine decline is an emerging forest health issue in the southeastern United States. Observations suggest pine decline is caused by environmental stress arising from competition, weather, insects and fungi, anthropogenic disturbances, and previous management. The problem is most severe for loblolly pine on sites that historically supported longleaf pine, are highly...

Regulatory requirements in the good manufacturing practice production of an epithelial cell graft for ocular surface reconstruction.

Science.gov (United States)

Sheth-Shah, Radhika; Vernon, Amanda J; Seetharaman, Shankar; Neale, Michael H; Daniels, Julie T

2016-04-01

In the past decade, stem cell therapy has been increasingly employed for the treatment of various diseases. Subsequently, there has been a great interest in the manufacture of stem cells under good manufacturing practice, which is required by law for their use in humans. The cells for sight Stem Cell Therapy Research Unit, based at UCL Institute of Ophthalmology, delivers somatic cell-based and tissue-engineered therapies to patients suffering from blinding eye diseases at Moorfields Eye Hospital (London, UK). The following article is based on our experience in the conception, design, construction, validation and manufacturing within a good manufacturing practice manufacturing facility based in the UK. As such the regulations can be extrapolated to the 28 members stated within the EU. However, the principles may have a broad relevance outside the EU.

78 FR 53426 - United States Travel and Tourism Advisory Board Charter Renewal

Science.gov (United States)

2013-08-29

... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism... for the United States Travel and Tourism Advisory Board on August 19, 2013. DATES: The Charter for the United States Travel and Tourism Advisory Board was renewed on August 19, 2013. FOR FURTHER INFORMATION...

Summary of Notifiable Diseases, United States. Volume 45, Number 53.

Science.gov (United States)

1997-10-31

Trichinosis Tuberculosis Typhoid fever Yellow fever NOTE: Although varicella is not a nationally notifiable disease, the Council of State and...plague among humans, two of which were fatal, were re- ported in the United States (two cases in Arizona, one in Colorado, and two in New Mexico ). Both...13 cases per year) were reported in the United States. Of these cases, 80% occurred in the southwestern states of New Mexico , Arizona, and

Forest carbon management in the United States: 1600-2100

Science.gov (United States)

Richard A. Birdsey; Kurt Pregitzer; Alan Lucier

2006-01-01

This paper reviews the effects of past forest management on carbon stocks in the United States, and the challenges for managing forest carbon resources in the 21st century. Forests in the United States were in approximate carbon balance with the atmosphere from 1600-1800. Utilization and land clearing caused a large pulse of forest carbon emissions during the 19th...

NCHS - Births and General Fertility Rates: United States

Data.gov (United States)

U.S. Department of Health & Human Services — This dataset includes crude birth rates and general fertility rates in the United States since 1909. The number of states in the reporting area differ historically....

Green electricity policies in the United States: case study

International Nuclear Information System (INIS)

Menz, Fredric C.

2005-01-01

While there has been interest in promoting the use of renewable energy in electricity production for a number of years in the United States, the market share of non-hydro renewable energy sources in electricity production has remained at about 2 percent over the past decade. The paper reviews the principal energy resources used for electricity production, considers the changing regulatory environment for the electricity industry, and describes government policies that have been used to promote green electricity in the United States, with an emphasis on measures adopted by state governments. Factors influencing the development of green power markets are also discussed, including underlying economic issues, public policy measures, the regulatory environment, external costs, and subsidies. Without significant increases in fossil fuel prices, much more stringent environmental regulations, or significant changes in electricity customer preferences, green electricity markets are likely to develop slowly in the United States

78 FR 70275 - United States Travel and Tourism Advisory Board

Science.gov (United States)

2013-11-25

... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism... an opportunity to apply for membership on the United States Travel and Tourism Advisory Board... Travel and Tourism Advisory Board (Board). The purpose of the Board is to advise the Secretary of...

Veterinary Fusarioses within the United States

Science.gov (United States)

Multilocus DNA sequence data was used to retrospectively assess the genetic diversity and evolutionary relationships of 67 Fusarium strains from veterinary sources, most of which were from the United States. Molecular phylogenetic analyses revealed that the strains comprised 23 phylogenetically dist...

Protective aprons in imaging departments: manufacturer stated lead equivalence values require validation

International Nuclear Information System (INIS)

Finnerty, M.; Brennan, P.C.

2005-01-01

The composition of protective aprons worn by X-ray personnel to shield against secondary radiation is changing. Lead is being replaced by either lead-free or composite (lead with other high atomic numbered elements) materials. These newer aprons are categorised by manufacturers in terms of lead equivalent values, but it is unclear how these stated values compare with actual lead equivalent values. In this work, the actual lead equivalence of 41 protective aprons from four manufacturers, all specified as having 0.25 mm lead equivalence, were investigated with transmission experiments at 70 and 100 kVp. All aprons were in current use. The aprons were screened for defects, and age, weight and design was recorded along with details of associated quality assurance (QA). Out of the 41 protective aprons examined for actual lead equivalence, 73% were outside tolerance levels, with actual levels in some aprons demonstrating less than half of the nominal values. The lack of compatibility between actual and nominal lead equivalent values was demonstrated by aprons from three of the four manufacturers investigated. The area of the defects found on screening of the protective aprons were within recommendations. The results highlight the need for acceptancy and ongoing checks of protective aprons to ensure that radiation exposure of imaging personnel is kept to a minimum. (orig.)

Low-level radioactive waste disposal technologies used outside the United States

International Nuclear Information System (INIS)

Templeton, K.J.; Mitchell, S.J.; Molton, P.M.; Leigh, I.W.

1994-01-01

Low-level radioactive waste (LLW) disposal technologies are an integral part of the waste management process. In the United States, commercial LLW disposal is the responsibility of the State or groups of States (compact regions). The United States defines LLW as all radioactive waste that is not classified as spent nuclear fuel, high- level radioactive waste, transuranic waste, or by-product material as defined in Section II(e)(2) of the Atomic Energy Act. LLW may contain some long-lived components in very low concentrations. Countries outside the United States, however, may define LLW differently and may use different disposal technologies. This paper outlines the LLW disposal technologies that are planned or being used in Canada, China, Finland, France, Germany, Japan, Sweden, Taiwan, and the United Kingdom (UK)

Pakistan: Can the United States Secure an Insecure State?

Science.gov (United States)

2010-01-01

do not have female staff; the male-to-female staff ratio in the health field is 7 to 1.130 More nurses and female staff are needed, especially to...exercise was rescheduled for 2009. 9 Interview with Ninth Air Force personnel, September 12, 2008. 200 Pakistan: Can the United States Secure an Insecure

The hydroelectric power market in the United States

International Nuclear Information System (INIS)

2002-01-01

The second-largest producer of hydroelectric power in the world is the United States, right after Canada. In the United States, 7.1 per cent of net electricity generation was attributed to hydroelectric power in 2000, which totalled 269 terawatt hours (TWh). Aging facilities, outdated technology in some facilities, a cumbersome licensing process, and increasing environmental demands from interest groups for the preservation of river systems and surrounding wildlife challenge the industry. Pacific Coast states, especially California, were faced with electric power shortages during the summer of 2001, due to low market prices, high power usage among consumers and drought. The problems with the deregulation of the electricity market were brought to light by these shortages. Legislation to restructure the electric power industry in 25 states had not been enacted as of January 2002. The purchase of more power from both Canada and the Mexico is being considered by the government of the United States, as is the creation of a national power grid to allow for power transmission throughout the country. The Canada-United States energy trade might be affected by such a move, and result in project construction opportunities for Canadian companies. Renewable energy sources must be responsible for the generation of 10 per cent of power generation levels by 2020, on a gradual basis as mandated by law. By 2005, New York City must purchase 10 per cent of its power from renewable energy sources, reaching 20 per cent by 2010. The repair and replacement of aging dam equipment, the development of advanced turbine technology to protect fish stocks and water quality, dam removal, the construction of power lines are all opportunities open to Canadian companies. 60 refs., 5 tabs

Research and photovoltaic industry at the United States

International Nuclear Information System (INIS)

Lerouge, Ch.; Herino, R.; Delville, R.; Allegre, R.

2006-06-01

For a big country as the United States, the solar energy can be a solution for the air quality improvement, the greenhouse gases fight and the reduction of the dependence to the imported petroleum and also for the economic growth by the increase of the employment in the solar industry sector. This document takes stock on the photovoltaic in the United States in the industrial and research domains. The american photovoltaic industry is the third behind the Japan and the Germany. (A.L.B.)

Research and Assessment of Learning Environments through Photoelicitation: Graduate Student Perceptions of Electronics Manufacturing in India

Science.gov (United States)

Berdanier, Catherine G. P.; Cox, Monica F.

2015-01-01

This research studies the positive and negative perceptions of graduate students from the United States studying issues of sustainable electronics and electronics manufacturing in India as part of a National Science Foundation Integrative Graduate Education and Research Traineeship (IGERT) curriculum. The purpose of this paper is to discuss the…

75 FR 78338 - Meeting of the United States-Oman Joint Forum on Environmental Cooperation Pursuant to the United...

Science.gov (United States)

2010-12-15

... DEPARTMENT OF STATE [Public Notice 7261] Meeting of the United States-Oman Joint Forum on Environmental Cooperation Pursuant to the United States-Oman Memorandum of Understanding on Environmental Cooperation ACTION: Notice of the meeting of the U.S.-Oman Joint Forum on Environmental Cooperation and...

77 FR 27669 - Modifications to Definition of United States Property

Science.gov (United States)

2012-05-11

... contracts. The temporary regulations provide that certain obligations of United States persons arising from upfront payments made by controlled foreign corporations pursuant to contracts that are cleared by a... the meaning of section 956(c)) for obligations of United States persons arising from certain upfront...

Contemporary United States Foreign Policy Towards Indonesia

National Research Council Canada - National Science Library

McAslan, Hugh

2004-01-01

United States national interests in Indonesia have traditionally being based on strategic security requirements given Indonesia's geographic location between the Indian and Pacific Oceans, and strong...

Exploring manufacturing solutions for SMEs

DEFF Research Database (Denmark)

Radziwon, Agnieszka; Blichfeldt, Henrik; Bilberg, Arne

This exploratory study provides an overview over current state of manufacturing solutions in small and medium sized enterprises (SMEs) in region of Southern Denmark. Building on manufacturing paradigms, this paper reveals relevant aspects for the development and implementation of improving SMEs...... of manufacturing solutions, which are required to increase their competitiveness and assure sustainable growth....

Employers mexican migrants in the United States

Directory of Open Access Journals (Sweden)

Eduardo Fernández Guzmán

2013-09-01

Full Text Available You might think that by definition the migrant labor plays in less profitable niches and meager social mobility. However, a large group of migrants in different economically developed countries have successfully launched businesses of diverse nature and volume. This is why entrepreneurship of migrants is an issue that has received increasing attention in recent years. Compared to other immigrant groups in the United States, Mexicans show low levels of entrepreneurial activity. The aim of this paper is to, through a general literature review of official statistical data, a preliminary analysis of mexican migrant entrepreneurship in the United States, that is to say in recent years has been growing in importance.

Motorcycle trends in the United States

Science.gov (United States)

2009-05-01

During the last decade there has been a significant increase in the number of motorcycle sales and registrations in the United States. At the same time there has been a shift in the demographics of motorcycle users and increased focus on motorcycle s...

THE UNITED STATES AND NIGERIAN RELATIONS:

African Journals Online (AJOL)

Mrs. I.D

2009-12-25

Dec 25, 2009 ... response from the Nigerian government. ... domestic crises that negatively impacts state stability, the US government ... Harrison C. Ajebon, Department of Political Science, University of Calabar, ..... Sweden. United Kingdom. Switzerland. Asia & far East. Japan ..... case Study of Nigeria, in Ikonnechidi and.

37 CFR 1.416 - The United States International Preliminary Examining Authority.

Science.gov (United States)

2010-07-01

... STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES International Processing Provisions General Information § 1.416 The United States International Preliminary... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false The United States...

IDENTIFICATION OF FACTORS AFFECTING LEAN MANUFACTURING IMPLEMENTATION IN PUMP MANUFACTURING COMPANIES IN INDIA - A CASE STUDY

Directory of Open Access Journals (Sweden)

Pratik Badgujar

2016-09-01

Full Text Available Lean Manufacturing has now become a common word in the industrial corridors. It has now been applied to the industries of several domains. No wonder that the Pump manufacturing has also witnessed profound influence of Lean philosophy. Pump manufacturing in India has a history as old as 80 years with more than 500 pump manufacturing units presently working. The present research is an explorative study and was undertaken to identify various factors affecting lean manufacturing implementation in pump manufacturing industry. Analysis of results revealed that the companies registered increase in productivity and reduction in costs and wastes. Lack of understanding, Supply chain and Company culture are found to be the strongest barriers of lean manufacturing implementation. The multiple regression model revealed that Lack of workers support can be fairly reduced by educating them about Lean Manufacturing and establishing a healthy communication with workers. An analysis across different management levels revealed disparity in perceptions and views of personnel. There is a need for top management to align organization toward common goals so as to achieve better success in implementing lean manufacturing.

31 CFR Appendix C to Subpart C of... - United States Customs Service

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false United States Customs Service C... Customs Service 1. In general. This appendix applies to the United States Customs Service. It sets forth... records and accounting of disclosures. (a) For records which are maintained at the United States Customs...

Energy-climate-manufacturing nexus: New insights from the regional and global supply chains of manufacturing industries

International Nuclear Information System (INIS)

Kucukvar, Murat; Cansev, Bunyamin; Egilmez, Gokhan; Onat, Nuri C.; Samadi, Hamidreza

2016-01-01

largest portion of total carbon emissions of Turkish manufacturing industries is found in Turkey’s regional boundary that ranged between 40% and 60% of total carbon emissions. In 2009, China, United States, and Rest-of-the-World’s contribution is found to be more than 50% of total energy use of Turkish manufacturing. The authors envision that a global MRIO framework can provide a vital guidance for policy makers to analyze the role of global manufacturing supply chains and prevent significant underestimations due to inclusion of limited number of tiers for sustainable supply chain management research.

The State of Homeless Children in the United States