Unravelling the mechanisms for plant survival on gypsum soils: an analysis of the chemical composition of gypsum plants from Turkey.

Science.gov (United States)

Bolukbasi, A; Kurt, L; Palacio, S

2016-03-01

Depending on their specificity to gypsum, plants can be classified as gypsophiles (gypsum exclusive) and gypsovags (non-exclusive). The former may further be segregated into wide and narrow gypsophiles, depending on the breadth of their distribution area. Narrow gypsum endemics have a putative similar chemical composition to plants non-exclusive to gypsum (i.e. gypsovags), which may indicate their similar ecological strategy as stress-tolerant plant refugees on gypsum. However, this hypothesis awaits testing in different regions of the world. We compared the chemical composition of four narrow gypsum endemics, one widely distributed gypsophile and six gypsovags from Turkey. Further, we explored the plasticity in chemical composition of Turkish gypsovags growing on high- and low-gypsum content soils. Differences were explored with multivariate analyses (RDA) and mixed models (REML). Narrow gypsum endemics segregated from gypsovags in their chemical composition according to RDAs (mainly due to higher K and ash content in the former). Nevertheless, differences were small and disappeared when different nutrients were analysed individually. All the gypsovags studied accumulated more S and ash when growing on high-gypsum than on low-gypsum soils. Similar to narrow gypsum endemics from other regions of the world, most local gypsum endemics from Turkey show a similar chemical composition to gypsovags. This may indicate a shared ecological strategy as stress-tolerant plants not specifically adapted to gypsum. Nevertheless, the narrow gypsum endemic Gypsophila parva showed a chemical composition typical of gypsum specialists, indicating that various strategies are feasible within narrowly distributed gypsophiles. © 2015 German Botanical Society and The Royal Botanical Society of the Netherlands.

Growth of indoor fungi on gypsum

NARCIS (Netherlands)

Segers, Frank J J; van Laarhoven, Karel A; Wosten, Han; Dijksterhuis, Jan

2017-01-01

AIMS: To have a better understanding of fungal growth on gypsum building materials to prevent indoor fungal growth. METHODS AND RESULTS: Gypsum is acquired by mining or as a by-product of flue-gas desulfurization or treatment of phosphate ore for the production of fertilizer. Natural gypsum,

ESR Studies and Dating of Egyptian Gypsum at Ras Mala'ab, Sinai, Egypt

International Nuclear Information System (INIS)

Abdel-Monem, A. A.; Abdei-Razek, Y. A.; Rasheed, N. M.; Hassan, G.M.; Eissa, H.M.; El-Morsy, M.

2007-01-01

A gypsum sample from the famous gypsum-anhydrite evaporitic deposit composing the Ras Mala'ab Formation, Upper Miocene, occurring at Ras Mala'ab, on the east coast of the Gulf of Suez, was subjected to (ESR) dosimetric studies. Also, (ESR) was used to date the formation or most recent recrystallization of that gypsum. The gypsum derivative (ESR) spectrum is characterized by the large broad Fe 2+ signal (g=2.50) and HF-sixtet Mn 2+ signals. Only the characteristic gypsum signal (G l, g=2.0040) was detected between the third and fourth lines of the HF-Mn 2+ which is attributed to the electron-center SO 3 - . This signal was sensitive to artificial γ-irradiation and showed significant enhancement using a γ-dose of 550 Gy. Also, the signal was very stable up to 400 o C. The gypsum sample with a total dose (TD) of 1500 Gy, determined graphically by extrapolating the linear relationship between defect concentration and the artificial γ-doses for (G l, g=2.0040) and an annual dose (D) due to cosmic rays (0.3 mGy), yielded an age of 5.00 Ma. This could mean the age of formation or latest recrystallization of this gypsum deposit. The geologic age assignment of the Ras Mala'ab Group including the evaporitic gypsum unit, is Middle to Late Miocene. It is directly overlain by the Pliocene elastics at the locality of Ras Mala'ab. This might suggest that these evaporitic gypsum facies represent the top of the Miocene in the Gulf of Suez area, since the Miocene-Pliocene boundary is now put at 5.00-5.50 Ma ago. Therefore, the ESR age of the Ras Mala'ab gypsum is consistent with the geologic age assignment

Influence of Flue Gas Desulfurization Gypsum on Reducing Soluble Phosphorus in Successive Runoff Events from a Coastal Plain Bermudagrass Pasture.

Science.gov (United States)

Watts, Dexter B; Torbert, H Allen

2016-05-01

Controlling the threat that pastures intensively managed with poultry litter (PL) pose to accelerating eutrophication is a major issue in the southeastern United States. Gypsum (CaSO) has been identified as a promising management tool for ameliorating litter P losses to runoff. Thus, research was conducted to elucidate gypsum's residual effects on P losses from a bermudagrass ( L.) pasture. Runoff events (60 min) were created using rainfall simulations. Treatments consisted of applying four flue gas desulfurization (FGD) gypsum rates (0, 2.2, 4.4, and 8.9 Mg ha) to bermudagrass fertilized with 13.4 Mg ha PL plus a nonfertilized check (no litter or gypsum) and 8.9 Mg ha FGD gypsum only as controls. Rainfall simulations (∼ 85 mm h) were conducted immediately, 5 wk, and 6 mo (i.e., at the end of growing season) after PL application to determine gypsum's effectiveness at controlling P loss over successive runoff events. The greatest dissolved P (DP) in runoff occurred immediately after PL application. Gypsum effectively reduced cumulative DP concentration losses (54%) compared with PL alone in initial runoff events. Gypsum reduced DP concentrations in succeeding runoff events also regardless of timing, suggesting that its effect is persistent and will not diminish over a growing season. Generally, maximum DP reductions were achieved with 8.9 Mg ha. However, it was surmised from this study that optimal P reduction in a bermudagrass pasture can be achieved with 4.4 Mg ha. Information ascertained from this study may be useful in aiding land managers making prescriptions for management practices that reduce DP losses from agricultural fields. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Gypsum crystals observed in experimental and natural sea ice

Science.gov (United States)

Geilfus, N.-X.; Galley, R. J.; Cooper, M.; Halden, N.; Hare, A.; Wang, F.; Søgaard, D. H.; Rysgaard, S.

2013-12-01

gypsum has been predicted to precipitate in sea ice, it has never been observed. Here we provide the first report on gypsum precipitation in both experimental and natural sea ice. Crystals were identified by X-ray diffraction analysis. Based on their apparent distinguishing characteristics, the gypsum crystals were identified as being authigenic. The FREeZing CHEMistry (FREZCHEM) model results support our observations of both gypsum and ikaite precipitation at typical in situ sea ice temperatures and confirms the "Gitterman pathway" where gypsum is predicted to precipitate. The occurrence of authigenic gypsum in sea ice during its formation represents a new observation of precipitate formation and potential marine deposition in polar seas.

Experimental Shock Transformation of Gypsum to Anhydrite: A New Low Pressure Regime Shock Indicator

Science.gov (United States)

Bell, Mary S.; Zolensky, Michael E.

2011-01-01

The shock behavior of gypsum is important in understanding the Cretaceous/Paleogene event and other terrestrial impacts that contain evaporite sediments in their targets (e.g., Mars Exploration Rover Spirit detected sulfate at Gusev crater, [1]). Most interest focuses on issues of devolatilization to quantify the production of SO2 to better understand its role in generating a temporary atmosphere and its effects on climate and biota [2,3]. Kondo and Ahrens [4] measured induced radiation emitted from single crystal gypsum shocked to 30 and 40 GPa. They observed greybody emission spectra corresponding to temperatures in the range of 3,000 to 4,000 K that are a factor of 2 to 10 times greater than calculated pressure-density energy equation of state temperatures (Hugoniot) and are high enough to melt gypsum. Chen et al. [5] reported results of shock experiments on anhydrite, gypsum, and mixtures of these phases with silica. Their observations indicated little or no devolatilization of anhydrite shocked to 42 GPa and that the fraction of sulfur, by mass, that degassed is approx.10(exp -2) of theoretical prediction. In another report of shock experiments on calcite, anhydrite, and gypsum, Badjukov et al. [6] observed only intensive plastic deformation in anhydrite shock loaded at 63 GPa, and gypsum converted to anhydrite when shock loaded at 56 GPa but have not experimentally shocked gypsum in a step-wise manner to constrain possible incipient transformation effects. Schmitt and Hornemann [7] shock loaded anhydrite and quartz to a peak pressure of 60 GPa and report the platy anhydrite grains were completely pseudomorphed by small crystallized anhydrite grains. However, no evidence of interaction between the two phases could be observed and they suggested that recrystallization of anhydrite grains is the result of a solid-state transformation. They concluded that significant decomposition of anhydrite requires shock pressures higher than 60 GPa. Gupta et al. [8

Mechanical properties of gypsum board at elevated temperatures

Science.gov (United States)

S.M. Cramer; O.M. Friday; R.H. White; G. Sriprutkiat

2003-01-01

Gypsum board is a common fire barrier used in house and general building construction. Recently, evaluation of the collapses of the World Trade Center Towers highlighted the potential role and failure of gypsum board in containing the fires and resisting damage. The use of gypsum board as primary fire protection of light-flame wood or steel construction is ubiquitous....

Mineral of the month: gypsum

Science.gov (United States)

Founie, Alan

2004-01-01

The earliest known use of gypsum as a building material was in Anatolia (in what is now Turkey) around 6000 B.C. It has been found on the interiors of the great pyramids in Egypt, which were erected in about 3700 B.C. Now an average new American home contains more than 7 metric tons of gypsum in the form of more than 6,000 square feet of wallboard.

Effect Of Coir Fibres On The Compaction And Unconfined Compressive Strength Of Bentonite-Lime-Gypsum Mixture

Directory of Open Access Journals (Sweden)

Tilak B. Vidya

2015-06-01

Full Text Available This paper presents the effect of coir fibres on the compaction and unconfined compressive strength of a bentonite-lime-gypsum mixture. The coir fiber content varied from 0.5 to 2 %. The results indicated that the dry unit weight and the optimum moisture content of a bentonite – lime mix increased with the addition of gypsum. The unconfined compressive strength of the bentonite increased with the increase in the lime content up to 8 %. Beyond 8 %, the unconfined compressive strength decreased. The dry unit weight of the reference mix decreased, and the optimum moisture content increased with the addition of coir fibre. The unconfined compressive strength of the bentonite + 8 % lime mix increased up to 4 % with the gypsum. Beyond 4 %, the unconfined compressive strength decreased. The unconfined compressive strength of the reference mix increased with the addition of coir fibre up to a fibre content of 1.5 %. The unconfined compressive strength of the reference mix-coir fibre composite was less in comparison to the reference mix. The unconfined compressive strength of the bentonite increased with the addition of lime and gypsum and with the increase in the curing period. The improvement in the post-peak region was better for the reference mix with reinforced coir fibres as compared to the unreinforced reference mix. The improved post-peak behaviour of the bentonite-lime-gypsum-coir fibre mixture could boost the construction of temporary roads on such problematic soils. Further, its use will also provide an environmental motivation for providing a means of consuming large quantities of coir fibres.

Effects of gypsum on trace metals in soils and earthworms

Science.gov (United States)

Mined gypsum has been beneficially used for many years as an agricultural amendment. Currently a large amount of flue gas desulfurization (FGD) gypsum is produced by removal of SO2 from flue gas streams when fuels with high S content are burned. The FGD gypsum, similar to mined gypsum, can enhance c...

Physicochemical Properties and Cellular Responses of Strontium-Doped Gypsum Biomaterials

OpenAIRE

Pouria, Amir; Bandegani, Hadis; Pourbaghi-Masouleh, Milad; Hesaraki, Saeed; Alizadeh, Masoud

2012-01-01

This paper describes some physical, structural, and biological properties of gypsum bioceramics doped with various amounts of strontium ions (0.19–2.23 wt%) and compares these properties with those of a pure gypsum as control. Strontium-doped gypsum (gypsum:Sr) was obtained by mixing calcium sulfate hemihydrate powder and solutions of strontium nitrate followed by washing the specimens with distilled water to remove residual salts. Gypsum was the only phase found in the composition of both pu...

Sustainable Uses of FGD Gypsum in Agricultural Systems: Introduction.

Science.gov (United States)

Watts, Dexter B; Dick, Warren A

2014-01-01

Interest in using gypsum as a management tool to improve crop yields and soil and water quality has recently increased. Abundant supply and availability of flue gas desulfurization (FGD) gypsum, a by-product of scrubbing sulfur from combustion gases at coal-fired power plants, in major agricultural producing regions within the last two decades has attributed to this interest. Currently, published data on the long-term sustainability of FGD gypsum use in agricultural systems is limited. This has led to organization of the American Society of Agronomy's Community "By-product Gypsum Uses in Agriculture" and a special collection of nine technical research articles on various issues related to FGD gypsum uses in agricultural systems. A brief review of FGD gypsum, rationale for the special collection, overviews of articles, knowledge gaps, and future research directions are presented in this introductory paper. The nine articles are focused in three general areas: (i) mercury and other trace element impacts, (ii) water quality impacts, and (iii) agronomic responses and soil physical changes. While this is not an exhaustive review of the topic, results indicate that FGD gypsum use in sustainable agricultural production systems is promising. The environmental impacts of FGD gypsum are mostly positive, with only a few negative results observed, even when applied at rates representing cumulative 80-year applications. Thus, FGD gypsum, if properly managed, seems to represent an important potential input into agricultural systems. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Gypsum crystals observed in experimental and natural sea ice

DEFF Research Database (Denmark)

Geilfus, Nicolas-Xavier; Galley, Ryan; Cooper, Marc

2013-01-01

, the gypsum crystals were identified as being authigenic. The FREeZing CHEMistry (FREZCHEM) model results support our observations of both gypsum and ikaite precipitation at typical in situ sea ice temperatures and confirms the “Gitterman pathway” where gypsum is predicted to precipitate. The occurrence...

Interaction of gypsum with lead in aqueous solutions

International Nuclear Information System (INIS)

Astilleros, J.M.; Godelitsas, A.; Rodriguez-Blanco, J.D.; Fernandez-Diaz, L.; Prieto, M.; Lagoyannis, A.; Harissopulos, S.

2010-01-01

Sorption processes on mineral surfaces are a critical factor in controlling the distribution and accumulation of potentially harmful metals in the environment. This work investigates the effectiveness of gypsum (CaSO 4 .2H 2 O) to sequester Pb. The interaction of gypsum fragments with Pb-bearing solutions (10, 100 and 1000 mg/L) was monitored by performing macroscopic batch-type experiments conducted at room temperature. The aqueous phase composition was periodically determined by Atomic Absorption Spectrometry (AAS), Ion Chromatography (IC) and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Regardless of the [Pb aq ] initial , a [Pb aq ] final aq ] initial ≥ 100 mg/L and significantly slower (t > 1 week) for [Pb aq ] initial = 10 mg/L. Speciation calculations revealed that after a long time of interaction (1 month), all the solutions reached equilibrium with respect to both gypsum and anglesite. For [Pb aq ] initial ≥ 100 mg/L, sorption takes place mainly via the rapid dissolution of gypsum and the simultaneous formation of anglesite both on the gypsum surface and in the bulk solution. In the case of [Pb aq ] initial = 10 mg/L, no anglesite precipitation was observed, but surface spectroscopy (proton Rutherford Backscattering Spectroscopy, p-RBS) confirmed the formation of Pb-bearing surface layers on the (0 1 0) gypsum surface in this case also. This study shows that the surface of gypsum can play an important role in the attenuation of Pb in contaminated waters.

Comparison of Energy Dissipation, Stiffness, and Damage of Structural Oriented Strand Board (OSB, Conventional Gypsum, and Viscoelastic Gypsum Shearwalls Subjected to Cyclic Loads

Directory of Open Access Journals (Sweden)

Andrew S. Blasetti

2012-06-01

Full Text Available A key element in the seismic load resisting system of a wood framed structure is the shear wall which is typically sheathed on one side with plywood or oriented strand board (OSB and gypsum on the other. The shear capacity of gypsum sheathed shear walls is typically neglected in high seismic areas due to the susceptibility of conventional drywall screw connections to damage caused by earthquakes. The earthquake resistance of an innovative viscoelastic (VE gypsum shearwall is evaluated and compared to conventional structural and non-structural walls. Ten 8 ft × 8 ft wood framed wall specimens of three configurations [nailed-OSB, screw-gypsum, and VE polymer-gypsum] were subjected to a cyclic test protocol. The energy dissipation, stiffness, and damage characteristics of all shearwalls are reported herein. Testing results indicate the VE-gypsum walls can dissipate more energy than the OSB structural panels and 500% more energy that the conventional gypsum sheathed walls and contains a constant source of energy dissipation not seen in the structural and non-structural walls. The wall stiffness of the OSB wall degrades at a far greater rate that the VE gypsum wall and at continued cycling degrades below the VE wall stiffness. Unlike both of the conventional wall types, the VE wall showed no visible or audible signs of damage when subjected to shear displacements up to 1.

Measurement of soil moisture using gypsum blocks

DEFF Research Database (Denmark)

Friis Dela, B.

the building. Consequently, measuring the moisture of the surrounding soil is of great importance for detecting the source of moisture in a building. Up till now, information has been needed to carry out individual calibrations for the different types of gypsum blocks available on the market and to account......For the past 50 years, gypsum blocks have been used to determine soil moisture content. This report describes a method for calibrating gypsum blocks for soil moisture measurements. Moisture conditions inside a building are strongly influenced by the moisture conditions in the soil surrounding...

Characterization of quality recycled gypsum and plasterboard with maximized recycled content

International Nuclear Information System (INIS)

Jiménez-Rivero, J.; García-Navarro, J.

2017-01-01

The quality of secondary materials is imperative to promote a circular economy. In order to improve the way in which the quality of recycled gypsum is assessed, European guidelines on recycled gypsum (RG) quality criteria have been outlined in the framework of the Life+ Gypsum to Gypsum (GtoG) project. Such GtoG guidelines, along with the European Standard on gypsum plasterboard EN 520, provided the basis for this study. During the GtoG project, gypsum recycling and plasterboard manufacturing processes were monitored by testing the gypsum feedstock and the plasterboard produced. The aim of this paper is to discuss the results obtained on relevant parameters that characterize gypsum as a secondary raw material, as well as the resulting product. The minimum requirements were fulfilled by 56% of the RG samples and 86% of the plasterboard with increased RG. [es

Radium uptake by recrystallized gypsum: an incorporation study

International Nuclear Information System (INIS)

Lestini, Leslie; Beaucaire, Catherine; Vercouter, Thomas; Descostes, Michael

2013-01-01

Batch experiments of 226 Ra uptake by recrystallized gypsum CaSO 4 .2H 2 O(s), monitored over 200 days, have shown that the published value for the distribution coefficient of 226 Ra between gypsum and an aqueous phase, 0.03 (Gnanapragasam and Lewis, 1995), is an upper limit. This suggests that this value needs to be confirmed. A solid solution between gypsum and radium sulfate (Ca,Ra)SO 4 .2H 2 O(s) cannot be considered per se, which is not surprising considering gypsum's high solubility product (lg Ks = -4.58) and the ionic radius of VIII Ra (1.48 A), when compared to that of VIII Ca (1.12 A). (authors)

Measuring the gypsum content of C&D debris fines.

Science.gov (United States)

Musson, Stephen E; Xu, Qiyong; Townsend, Timothy G

2008-11-01

Construction and demolition (C&D) debris recycling facilities often produce a screened material intended for use as alternative daily cover (ADC) at active landfills or for shaping and grading at closed landfills. This product contains soil and small pieces of wood, concrete, gypsum drywall, shingles and other components of C&D debris. Concerns have been raised over the contribution of gypsum drywall in C&D debris fines to odor problems at landfills where the product is used. To address such concerns, limitations may be placed on the percentage of gypsum (or sulfate) that can occur, and standardized testing procedures are required to permit valid compliance testing. A test procedure was developed for measuring the gypsum content in C&D debris fines. The concentration of sulfate leached in an aqueous solution was used to estimate the initial gypsum content of the sample. The impact of sample size and leaching time were evaluated. Precision and accuracy increased with increasing gypsum content. Results from replicate samples had an average relative standard deviation of 9%. The gypsum content of fines obtained from different facilities in the US varied widely from 1% to over 25%. These variations not only occurred between differing facilities, but within batches produced within a single facility.

Messinian Salinity Crisis' Primary Evaporites: the shallow gypsum vs. deep dolomite formation paradox solved

Science.gov (United States)

De Lange, G. J.; Krijgsman, W.

2015-12-01

The Messinian Salinity Crisis (MSC) is a dramatic event that took place ~ 5.9 Ma ago, resulting in deposition of 1-3 km thick evaporites at the Mediterranean seafloor. A considerable, long-lasting controversy existed on the modes of their formation, including the observed shallow gypsum versus deep dolostone deposits for the early phase of MSC. The onset of MSC is marked by deposition of gypsum/sapropel-like alternations, thought to relate to arid/humid climate conditions at a precessional rhythm. Gypsum precipitation only occurred at marginal- and dolomite formation at deeper settings. A range of potential explanations was given, most of which cannot satisfactorily explain all observations. Biogeochemical processes during MSC are commonly neglected but may explain that different deposits formed in shallow vs deep environments without exceptional physical boundary conditions for each. A unifying mechanism is presented in which gypsum formation occurs at all shallow water depths but its preservation is limited to shallow sedimentary settings. In contrast, ongoing deep-basin anoxic organic matter (OM) degradation processes result in dolomite formation. Gypsum precipitation in evaporating seawater takes place at 3-7 times concentrated seawater; seawater is always oversaturated relative to dolomite but its formation is inhibited by the presence of dissolved sulphate. Thus conditions for formation of gypsum exclude those for formation of dolomite and vice versa. Another process linking the saturation states of gypsum and dolomite is that of OM degradation by sulphate reduction. In stagnant deep water, ongoing OM-degradation may result in reducing the sulphate and enhancing the dissolved carbonate content. Such low-sulphate / high carbonate conditions in MSC deepwater are. unfavorable for gypsum preservation and favorable for dolomite formation, and always coincide with anoxic, i.e. oxygen-free conditions. Including dynamic biogeochemical processes in the thusfar static

Suitability of Gypsum for the Production of Gypsum Plaster an Example from the Abu-Ruweis Evaporites (Upper Triassic), as Subayhi Area, Northwest Jordan

International Nuclear Information System (INIS)

Saqqa, W.; Arikat, M.

2003-01-01

The gypsum of Abu Ruweis Formation (Upper Triassic) of the northwestern Jordan was chemically, physically and mechanically assessed for likely industrial uses. Chemical results indicate that the investigated gypsum (calcium sulfate dihydrate) is highly pure. This is confirmed by the high ratios of CaO (32-33%) andSO 3 (41-43%) and the very low content of other elements such as Mg, Al and Si. Trace elements are also negligible. The CaSO 4 % (86-88%), purity ratio (CaO/SO 3 ) (0.85) , and combined water (≅5%) for β-hemihydrate gypsum agree well with the jordanian standards for gypsum plaster. Thermal analyses indicate that the temperature required to obtain hemihydrate gypsum falls between 175deg-200deg. A significant mass variation or maximum loss on weight (-20%) was achieved after initial dehydration by heating to 200deg. Heating to 225deg is far enough to evolve all combined water molecules. The results of fineness, consistency, setting time, compressive strength and flexural strength for β-hemilhydrate agree, in most of the case, with the local and international standards intended for gypsum building components. The study showed that the absorption and consistency ratios for final gypsum product are proportional to porosity, whilst the consistency itself decreases with the increase of applied stresses. (author)

Influence of gypsum on efflorescence in ceramic tiles; Influence da gipsita no surgimento de eflorescencia em telhas ceramicas

Energy Technology Data Exchange (ETDEWEB)

Monteiro, C.M.O.L. [Servico Nacional de Aprendizagem Industrial (SENAI), Teresina, PI (Brazil); Nascimento, R.M.; Martinelli, A.E. [Universidade Federal do Rio Grande do Norte (PPgCEM/UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais

2009-07-01

The red ceramic industry is recognized as of major importance in Piaui State. The State capital, Teresina, is the greatest producer of this material, which is used mainly for masonry sealing blocks. One of the most frequent problems in this kind of products is the efflorescence.This paper has the main objective of studying the influence of gypsum on tiles, using the local industry production standards. The raw materials were characterized by FRX, DRX, thermal analysis and sulfates. Extruded test specimens were made with the addition of 1%, 3% and 5% of gypsum in the ceramic paste, burned at 850 deg C, 950 deg C and 1050 deg C and submitted to further technological and analysis for MEV. The reference ceramic paste did not show tendency to efflorescence formation after burning for samples with 1% gypsum added to the paste. The reference ceramic paste showed tendency to efflorescence formation after drying and consolidated efflorescence after burning for samples with 5% gypsum added to the paste. (author)

Impact of welan gum on tricalcium aluminate–gypsum hydration

International Nuclear Information System (INIS)

Ma Lei; Zhao Qinglin; Yao Chukang; Zhou Mingkai

2012-01-01

The retarding effect of welan gum on tricalcium aluminate–gypsum hydration, as a partial system of ordinary Portland cement (OPC) hydration, was investigated with several methods. The tricalcium aluminate–gypsum hydration behavior in the presence or absence of welan gum was researched by field emission gun scanning electron microscopy, X-ray diffraction and zeta potential analysis. Meanwhile, we studied the surface electrochemical properties and adsorption characteristics of welan gum by utilizing a zeta potential analyzer and UV–VIS absorption spectrophotometer. By adding welan gum, the morphology change of ettringite and retardation of hydration stages in tricalcium aluminate–gypsum system was observed. Moreover, we detected the adsorption behavior and zeta potential inversion of tricalcium aluminate and ettringite, as well as a rapid decrease in the zeta potential of tricalcium aluminate–gypsum system. The reduction on nucleation rate of ettringite and hydration activity of C 3 A was also demonstrated. Thus, through the adsorption effect, welan gum induces a retarding behavior in tricalcium aluminate–gypsum hydration. Highlights: ► Adsorption characteristics of welan gum on C 3 A and ettringite have been studied. ► C 3 A–gypsum hydration behavior and the hydration products are examined in L/S = 3. ► Welan gum retards the process of C 3 A–gypsum hydration. ► The addition of welan gum changes the nucleation growth of ettringite.

Interaction of gypsum with lead in aqueous solutions

Energy Technology Data Exchange (ETDEWEB)

Astilleros, J.M., E-mail: jmastill@geo.ucm.es [Dpto. Cristalografia y Mineralogia, Universidad Complutense de Madrid, Jose Antonio Novais, 2, E-28040 Madrid (Spain); Godelitsas, A. [Department of Mineralogy and Petrology, Faculty of Geology and Geoenvironment, University of Athens, Panepistimioupoli Zographou, 15784 Athens (Greece); Rodriguez-Blanco, J.D. [School of Earth and Environments, Faculty of Environment, University of Leeds, Leeds LS2 9JT (United Kingdom); Fernandez-Diaz, L. [Dpto. Cristalografia y Mineralogia, Universidad Complutense de Madrid, Jose Antonio Novais, 2, E-28040 Madrid (Spain); Prieto, M. [Dpto. de Geologia, Universidad de Oviedo, E-30005 Oviedo (Spain); Lagoyannis, A.; Harissopulos, S. [Tandem Accelerator Laboratory, Institute of Nuclear Physics, NCSR ' Demokritos' , GR-15310 Attiki (Greece)

2010-07-15

Sorption processes on mineral surfaces are a critical factor in controlling the distribution and accumulation of potentially harmful metals in the environment. This work investigates the effectiveness of gypsum (CaSO{sub 4}.2H{sub 2}O) to sequester Pb. The interaction of gypsum fragments with Pb-bearing solutions (10, 100 and 1000 mg/L) was monitored by performing macroscopic batch-type experiments conducted at room temperature. The aqueous phase composition was periodically determined by Atomic Absorption Spectrometry (AAS), Ion Chromatography (IC) and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Regardless of the [Pb{sub aq}]{sub initial}, a [Pb{sub aq}]{sub final} < 4 mg/L was always reached. The uptake process was fast (t < 1 h) for [Pb{sub aq}]{sub initial} {>=} 100 mg/L and significantly slower (t > 1 week) for [Pb{sub aq}]{sub initial} = 10 mg/L. Speciation calculations revealed that after a long time of interaction (1 month), all the solutions reached equilibrium with respect to both gypsum and anglesite. For [Pb{sub aq}]{sub initial} {>=} 100 mg/L, sorption takes place mainly via the rapid dissolution of gypsum and the simultaneous formation of anglesite both on the gypsum surface and in the bulk solution. In the case of [Pb{sub aq}]{sub initial} = 10 mg/L, no anglesite precipitation was observed, but surface spectroscopy (proton Rutherford Backscattering Spectroscopy, p-RBS) confirmed the formation of Pb-bearing surface layers on the (0 1 0) gypsum surface in this case also. This study shows that the surface of gypsum can play an important role in the attenuation of Pb in contaminated waters.

GYPSUM DEPOSITS IN THE REPUBLIC OF CROATIA

Directory of Open Access Journals (Sweden)

Anto Gabrić

2002-12-01

Full Text Available The occurences and deposits of gypsum can be found in big karst poljes (Sinjsko, Vrličko, Petrovo, Kosovo and Kninsko as well as in tectonnically predestined river valleys of Zrmanja, Butišnica and Una. There also appear spatially localized occurences on the island of Vis and in the vicinity of Samobor. Evaporites (gypsum and anhydrite with adjoining overlying clastic rocks (red sandstones, siltites and pelites, carbonate rocks (dolomites and limestones and porous carbonate breccias (Rauhwackes were deposited during the period of Upper Permian. The recent position of the Upper Permian beds is a result of complex tectonic, particularly neotectonic, movements and diapiric displacements. Evaporites were deposited in marginal areas of the epicontinental marine basin, in a period of favourable conditions for the sabkha and playa sedimentation due to the continuous shoreline progradation. The Upper Permian age of these sediments in Dalmatio is proved by the characteristic mineral paragenesis and palinological determinations in elastics rocks, as well as by isotope analyses of sulphure in gypsum. Gypsum is a significant ore mineral resource in building, cement production, as well as in a number of tehnological processes used in chemical industry and elsewhere. According to the recent investigations gypsum is predestined to serve as an ore mineral resource of significant perspectives (the paper is published in Croatian.

Assessment of Natural Exposure From Some kinds of Egyptian Gypsum Using Low Background Spectrometer

International Nuclear Information System (INIS)

Sroor, A.

2006-01-01

Radioactivity of natural gypsum and gypsum derived products are examined investigated due to their importance as element of building materials and agricultural gypsum. the natural gypsum and its product may constitute an additional source of radiation exposure to workers and members of public from radiation produced by radioactive decaying. thirty natural gypsum samples from different quarries and 32 fabricated gypsum samples from commercial companies were analyzed using low background HPGe detector. the natural concentration of Ra-226, 232 Th and 40 K activities in all samples were determined in Bq/Kg dry weight. it was found that radioactivity of natural gypsum is less than the fabricated gypsum, so it can be used as agricultural gypsum. fabricated gypsum is suitable for use as an element of building material in egypt

Use of gypsum residues as a corrective for saline-sodic soil

Directory of Open Access Journals (Sweden)

Paulo Medeiros dos Santos

2014-03-01

Full Text Available One of the hugest problems faced by the civil construction sector is the final destination of residues, especially gypsum, which presents recycling restrictions. However, these residues present a high amount of calcium in their composition, and can be alternatively used for replacing mined gypsum as a saline-sodic soil corrective. This study aimed at evaluating the efficiency of gypsum residues from the civil construction, when compared to mined gypsum, for correcting a saline-sodic soil. A randomized blocks design was used, in a factorial arrangement consisting of two kinds of corrective (gypsum residue and mined gypsum and five leaching depths (0.5, 1.0, 1.5, 2.0 and 2.5 times the soil pores volume, with three replications. Electric conductivity, soluble cations and sodium adsorption ratio were evaluated in the soil saturation extract. The use of gypsum residue proved to be effective in leaching salts and soluble sodium in saline-sodic soil, and can be recommended as a calcium source for recovering from sodicity.

Soil management and application of agricultural gypsum in a Planosol for soybean cultivation

OpenAIRE

Marchesan, Enio; Tonetto, Felipe; Teló, Gustavo Mack; Coelho, Lucas Lopes; Aramburu, Bruno Behenck; Trivisiol, Vinicius Severo

2017-01-01

ABSTRACT: This study investigated the effects of soil management systems, tillage, and application of gypsum agricultural to soil, on soybean development in lowland areas. The experiment was carried out on an Alfisol in a randomized complete block design in a factorial arrangement. The two soil tillage practices were without deep tillage and with deep tillage. Gypsum treatments were no gypsum application, 500kg of gypsum ha-1, 1000kg of gypsum ha-1, and 1500kg of gypsum ha-1. Deep tillage res...

Direct and indirect dating of gypsum occurrences in deserts using luminescence methods

International Nuclear Information System (INIS)

Nagar, Y.C.; Juyal, N.; Singhyi, A.K.; Kocurek, G.; Wadhawan, S.K.

2005-01-01

In the present study we have made an attempt to directly date gypsum or provide indirect age estimate for gypsum formation through dating the associated sediments (quartz) using the luminescence dating technique. In the direct dating of gypsum, we explored the Optically Stimulated Luminescence (OSL) and Thermally Stimulated Luminescence (TL) behaviour of gypsum. The associated sediments (indirect dating) were dated using the traces of quartz extract from gypsum (concentration 0.1% ) and the underlying and overlying quartz sand in playa

MARKETING OF BYPRODUCT GYPSUM FROM FLUE GAS DESULFURIZATION

Science.gov (United States)

The report gives results of an evaluation of the 1985 marketing potential of byproduct gypsum from utility flue gas desulfurization (FGD), for the area east of the Rocky Mountains, using the calculated gypsum production rates of 14 selected power plants. The 114 cement plants and...

Synthesis of partial stabilized cement-gypsum as new dental retrograde filling material

Energy Technology Data Exchange (ETDEWEB)

Sadhasivam, S. [Institute of Biomedical Engineering, National Taiwan University, Taipei, Taiwan (China); Division of Medical Engineering Research, National Health Research Institute, Zhunan, Miaoli County, Taiwan (China); Chen, Jung-Chih [Institute of Biomedical Engineering, National Taiwan University, Taipei, Taiwan (China); Medical Device Innovation Center, National Cheng Kung University, Tainan,Taiwan (China); Savitha, S. [Institute of Biomedical Engineering, National Taiwan University, Taipei, Taiwan (China); Hsu, Ming-Xiang; Hsu, Chung-King [Institute of Materials Science and Engineering, National Taipei University of Technology, Taipei, Taiwan (China); Lin, Chun-Pin [School of Dentistry and Graduate Institute of Clinical Dentistry, College of Medicine, National Taiwan University and National Taiwan University Hospital, Taipei, Taiwan (China); Lin, Feng-Huei, E-mail: double@ntu.edu.tw [Institute of Biomedical Engineering, National Taiwan University, Taipei, Taiwan (China); Division of Medical Engineering Research, National Health Research Institute, Zhunan, Miaoli County, Taiwan (China)

2012-10-01

The study describes the sol-gel synthesis of a new dental retrograde filling material partial stabilized cement (PSC)-gypsum by adding different weight percentage of gypsum (25% PSC + 75% gypsum, 50% PSC + 50% gypsum and 75% PSC + 25% gypsum) to the PSC. The crystalline phase and hydration products of PSC-gypsum were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis. The handling properties such as setting time, viscosity, tensile strength, porosity and pH, were also studied. The XRD and microstructure analysis demonstrated the formation of hydroxyapatite and removal of calcium dihydrate during its immersion in simulated body fluid (SBF) on day 10 for 75% PSC + 25% gypsum. The developed PSC-gypsum not only improved the setting time but also greatly reduced the viscosity, which is very essential for endodontic surgery. The cytotoxic and cell proliferation studies indicated that the synthesized material is highly biocompatible. The increased alkaline pH of the PSC-gypsum also had a remarkable antibacterial activity. - Highlights: Black-Right-Pointing-Pointer A new dental retrograde filling material PSC-gypsum was developed. Black-Right-Pointing-Pointer PSC-gypsum cement has shown excellent initial and final setting time as 15-35 min. Black-Right-Pointing-Pointer It not only improved the setting time but also retain the viscosity, 2 Pa{center_dot}s. Black-Right-Pointing-Pointer High alkaline pH of the cement had a remarkable antibacterial activity. Black-Right-Pointing-Pointer Cytotoxicity studies revealed that the synthesized material is highly biocompatible.

Uranium-series dating of gypsum speleothems: methodology and examples.

Directory of Open Access Journals (Sweden)

Sanna Laura

2010-01-01

Full Text Available The analytical problems of dating gypsum speleothems with the U-series technique are reviewed. Gypsum speleothems are, in general, very low in U content, challenging the limits of detection methods. Various approaches to dissolving gypsum and isolation of actinides from the matrix include ion-pairing dissolution with magnesium salts and using nitric acid. The most precise dating technique is Thermal Ionization Mass Spectrometry (TIMS, combined with Fe(OH3 scavenging and anionic exchange chromatography. Less satisfactory, but much quicker, is direct retention of actinides from HNO3 by means of TRU resin and MC-ICP-MS detection. We have tested these methods on gypsum speleothems from the Sorbas karst in Spain and from the Naica caves in Mexico.

Occurrence and geochemistry of Nafada Gypsum, north-eastern ...

African Journals Online (AJOL)

Gypsum deposits occur in numerous locations within the Senonian Fika Shale at Nafada, northeastern Nigeria. Geologic investigations at Baro Winde and Wuro Dabo mines indicate the occurrence of three varieties of gypsum namely, Balatino laminated, Alabaster and Satin Spar. These are interlayered within shale and ...

Gypsum as a bedding source for broiler chickens

Science.gov (United States)

Three trials examined the feasibility of flue gas desulfurization gypsum as a bedding material for raising broilers. Gypsum was used alone, under or on top of pine shavings and pine bark. Test materials were placed as bedding in pens to simulate commercial broiler production through three growout cy...

Simulating the structure of gypsum composites using pulverized basalt waste

Directory of Open Access Journals (Sweden)

Buryanov Аleksandr

2017-01-01

Full Text Available This paper examines the possibility of simulating the structure of gypsum composite modified with basalt dust waste to make materials and products based on it. Structural simulating of the topological space in gypsum modified composite by optimizing its grain-size composition highly improves its physical and mechanical properties. Strength and density tests have confirmed the results of the simulation. The properties of modified gypsum materials are improved by obtaining of denser particle packing in the presence of hemihydrate of finely dispersed basalt and plasticizer particles in the system, and by engaging basalt waste in the structuring process of modified gypsum stone.

Process for reducing radioactive contamination in waste product gypsum

International Nuclear Information System (INIS)

Lange, P.H. Jr.

1979-01-01

A process is described for reducing the radioactive contamination in waste product gypsum in which waste product gypsum is reacted with a dilute sulfuric acid containing barium sulfate to form an acid slurry at an elevated temperature, the slurry is preferably cooled, the acid component is separated from the solid, and the resulting solid is separated into a fine fraction and a coarse fraction. The fine fraction predominates in barium sulfate and radioactive contamination. The coarse fraction predominates in a purified gypsum product of reduced radioactive contamination

Mechanism of gypsum hydration

Directory of Open Access Journals (Sweden)

Pacheco, G.

1991-06-01

Full Text Available There is an hypothesis that the mechanism o f gypsum hydration and dehydration is performed through two simultaneous phenomena. In this study we try to clear up this phenomenon using chlorides as accelerators or a mixture of ethanol-methanol as retarders to carry out the gypsum setting. Natural Mexican gypsum samples and a hemihydrate prepared in the laboratory are used. The following analytical techniques are used: MO, DRX, DTA, TG and DTG. In agreement with the obtained results, it can be concluded: that colloid formation depends on the action of accelerators or retarders and the crystals are a consequence of the quantity of hemihydrate formed.

En el mecanismo de hidratación y deshidratación del yeso existe la hipótesis de que éste se efectúa por dos fenómenos simultáneos. Este estudio intenta esclarecer estos fenómenos, empleando: cloruros como aceleradores o mezcla etanol-metanol como retardadores para efectuar el fraguado del yeso. Se emplean muestras de yeso de origen natural mexicano y hemihydrate preparado en laboratorio; se utilizan técnicas analíticas: MO, DRX, DTA, TG y DTG. De acuerdo a los resultados obtenidos se puede deducir: que la formación del coloide depende de la acción de los agentes aceleradores o retardadores y que los cristales son consecuencia de la cantidad de hemihidrato formado.

Primary Evaporites for the Messinian Salinity Crisis: the shallow gypsum vs. deep dolomite formation paradox solved

Science.gov (United States)

De Lange, Gert J.; Krijgsman, Wout

2014-05-01

The Messinian Salinity Crisis (MSC) is a dramatic event that took place ~ 5.9 Ma ago, and resulted in the deposition of 0.3-3 km thick evaporites at the Mediterranean seafloor. A considerable and long-lasting controversy existed on the modes of their formation. During the CIESM Almeria Workshop a consensus was reached on several aspects. In addition, remaining issues to be solved were identified, such as for the observed shallow gypsum versus deep dolostone deposits for the early phase of MSC. The onset of MSC is marked by deposition of gypsum/sapropel-like alternations, thought to relate to arid/humid climate conditions. Gypsum precipitation only occurred at marginal settings, while dolomite containing rocks have been reported from deeper settings. A range of potential explanations have been reported, most of which cannot satisfactorily explain all observations. Biogeochemical processes during MSC are poorly understood and commonly neglected. These may, however, explain that different deposits formed in shallow versus deep environments without needing exceptional physical boundary conditions for each. We present here a unifying mechanism in which gypsum formation occurs at all shallow water depths but its preservation is mostly limited to shallow sedimentary settings. In contrast, ongoing anoxic organic matter (OM) degradation processes in the deep basin result in the formation of dolomite. Gypsum precipitation in evaporating seawater takes place at 3-7 times concentrated seawater; seawater is always largely oversaturated relative to dolomite but its formation is thought to be inhibited by the presence of dissolved sulphate. Thus the conditions for formation of gypsum exclude those for the formation of dolomite and vice versa. Another process that links the saturation states of gypsum and dolomite is that of OM degradation by sulphate reduction. In stagnant deep water, oxygen is rapidly depleted through OM degradation, then sulphate becomes the main oxidant for OM

UTILIZATION OF MINERAL FIBER WASTE IN THE PRODUCTION OF GYPSUM PRODUCTS

Directory of Open Access Journals (Sweden)

Solov'ev Vitaliy Nikolaevich

2018-01-01

Full Text Available Subject: the effectiveness of using compositions with the use of basalt fibers is proven, but the composition must be selected depending on the binder and additives chosen. Research objectives: we examine the possibility of waste recycling of basalt fiber production during manufacturing of modified gypsum composite material with improved characteristics. Materials and methods: as a raw material, a gypsum binder of Samara production was used. As a reinforcement additive, a disperse waste of basalt fiber production of Tver region was used. Studying characteristics of the gypsum binder and modified mixture, and also comparative analysis of these characteristics by average density, total porosity, strength in compression and flexure of the gypsum composite were carried out using standard techniques. Results: dependence of physical and mechanical properties of the modified gypsum material on the content of the basalt fiber additive is established. It was found that an increase in concentration of the additive requires an increased water content or additional use of plasticizer. Conclusions: modification of gypsum stone with a mineral basalt additive will increase the strength, density and durability of thin-walled gypsum products, and, consequently, the demand for products due to ensuring their high quality in transportation and installation.

Chemical properties of an Oxisol after gypsum application

Directory of Open Access Journals (Sweden)

Victor Roncaratti de Moraes

2016-10-01

Full Text Available Gypsum utilization is a critical practice in agriculture because of the high solubility and consequent relative neutralization of subsurface toxic aluminum. However, it has been observed that in most cases, gypsum is being randomly utilized without scientifically established parameters or even the need to use it as a soil amendment at all. The objective of this study was to evaluate the chemical composition and electrical conductivity of an Oxisol’s saturation extract under different gypsum doses (0, 1.0, 2.0, 4.0, and 8.0 Mg ha-1. This experiment was conducted in a greenhouse environment. Soil columns (V = 1.57 dm3 were filled with sifted (2 mm soil collected from the upper layer (0-20 cm. The experimental design adopted was completely randomized with five repetitions. The treatments consisted of a 5 × 2 factorial through five gypsum doses (0.0, 1.0, 2.0, 4.0, and 8.0 Mg ha-1 of gypsum consisting of 224.1 g kg-1 S, 314.8 g kg-1 CaO, and 7 g kg-1 P2O5 and two depth evaluations (0-10 and 10-20 cm. After the treatments, soil from both 0-10 cm and 10-20 cm layers was removed from the columns, sifted once (2 mm, and subjected to vacuum extraction to assess the saturation extract. The data acquired was processed and submitted to variance analysis (when due and adjusted to regression equations when statistically relevant. Significant increases were observed for Ca, Mg, K, P, and S, although Al, Si, and pH presented no statistically significant difference. The electrical conductivity value of this soil in particular is directly related to the gypsum dose.

Development of gypsum alteration on marble and limestone

Science.gov (United States)

McGee, E.S.

1996-01-01

Blackened alteration crusts of gypsum plus particulates that form on sheltered areas on marble and limestone buildings pose a challenge for rehabilitation and cleaning. Fresh marble and limestone samples exposed at monitored exposure sites present conditions of simple geometry and well-documented exposures but have short exposure histories (one to five years). The gypsum alteration crusts that develop on these samples provide insight into the early stages and rate of alteration crust formation. Alteration crusts from buildings give a longer, but less well known exposure history and present much more complex surfaces for gypsum accumulation. Integrated observations and measurements of alteration crusts from exposure samples and from buildings identify four factors that are important in the formation and development of alteration crusts on marble and limestone: (1) pollution levels, (2) exposure to rain or washing, (3) geometry of exposure of the stone surface, and (4) permeability of the stone. The combination of these factors contributes to both the distribution and the physical characteristics of the gypsum crusts which may affect cleaning decisions.

31 CFR 515.321 - United States; continental United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 515.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including the Trust Territory of...

31 CFR 500.321 - United States; continental United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 500.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including U.S. trust territories...

31 CFR 535.321 - United States; continental United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 535.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof including the Trust Territory of...

PPF-reinforced, ESP-lightened gypsum plaster

Directory of Open Access Journals (Sweden)

García Santos, A.

2009-03-01

Full Text Available A new construction material has been obtained by adding aggregate to gypsum plaster which, without reducing the bending strength of plain gypsum plaster without aggregates, lowers its density, and consequently the weight of the construction elements made from the agglomerated material, by half.The aggregates used were expanded polystyrene beads and short polypropylene fibre.The new material addresses one of the issues of cardinal interest in construction materials and construction element research, namely the need to lighten materials so as to ease the burden on buildings’ bearing structures while facilitating assembly of construction units, by a single worker wherever possible.With a water / binder ratio of 0.7 and 2% (by weight of plaster of expanded polystyrene and 2% of polypropylene fibre aggregates, the decline in density achieved was 50,88% over plain gypsum plaster and 32.88% over plasterboard.Se ha obtenido un nuevo material de construcción aditivando el yeso o la escayola, mediante la incorporación de agregados, de modo que sin reducir la resistencia a flexotracción de una escayola sin ningún tipo de adición, reduce su densidad a la mitad, y por tanto, el peso de los elementos constructivos que puedan realizarse basándose en él.El material está compuesto por una adición de gránulos de poliestireno expandido y fibras cortadas de polipropileno.El nuevo material incide sobre aquellos aspectos de más interés en el campo de la investigación en construcción, en donde se intenta reducir el peso de los materiales, de modo que se grave lo menos posible la estructura resistente de las edificaciones, a la par que se facilitan los procedimientos de montaje de las unidades constructivas, al poder ser manejadas por un solo operario.La escayola, con relación de agua/conglomerante de 0,7, y con adiciones del 2% en peso (sobre la cantidad de escayola, tanto de poliestireno expandido como de fibras de polipropileno, permite reducir la

Gypsum-anhydrites in 2 Ga Vempalle Formation, Cuddapah basin ...

Indian Academy of Sciences (India)

69

In fact high solubility in water leads to removal of gypsum in suficial environment. ... with presence of evaporite gypsum in the upper as well as lower part of the ..... created with shallow inlet or a slightly permeable seal with main water body.

Characterization of gypsum crystals exposed to a high CO2 concentration fog using x-ray

International Nuclear Information System (INIS)

Carreño-Márquez, I. J. A.; Castillo-Sandoval, I.; Esparza-Ponce, H. E.; Fuentes-Cobas, L.; Montero-Cabrera, M. E.

2015-01-01

In Chihuahua State, a little town called Naica has the largest gypsum single crystals in the world. The growth of these structures has been described as a long and stable process developed over thousands of years. Due to the change in the environmental conditions, these crystals could suffer alterations on their surface. In this project we study the cause of possible deterioration of the giant crystals and intend to suggest measures for their preservation. For this sake, our first experiment consists on several gypsum crystals that have been subjected in a climate chamber to a fog at high CO 2 concentration and 51 °C for a period of time of six months, extracting two crystals every 15 days. Then the crystals have been characterized through Grazing Incidence X-Ray Diffraction using a diffractometer PanAlytical X’PertPro with two different detectors; Xe-filled proportional detector and a Pixel 3D detector. The results were compared to determine which technique is the most suitable to study the degradation of gypsum single crystals. In the two cases, we have identified only the gypsum phase, but with different crystal plane orientations

Initiation and growth of gypsum piercement structures in the Zechstein Basin

Science.gov (United States)

Williams-Stroud, S. C.; Paul, J.

1997-01-01

The importance of tectonic processes in initiating halite diapirs has become much better understood in recent years. Less well understood is the development of diapiric structures involving rocks composed predominantly of gypsum. Below about 1000 m, gypsum dehydrates to anhydrite, which often obscures primary sedimentary textures. If the strain associated with diapiric rise in the rock induces the transition to anhydrite, obliteration of primary features in the gypsum can be expected. In our study, we infer that the diapiric movement in the Werra Anhydrite member of cycle 1 of the Zechstein Formation of Europe occurred before the initial transition of gypsum to anhydrite based on the presence of pseudomorphs of bedded primary gypsum crystals, the overburden lithologies and depositional environment, and the mechanical properties of gypsum, anhydrite and carbonate rocks. Faulting and differential loading of a shallow overburden were the key components in initiating the gypsum diapirism. The transition to anhydrite occurred after burial and after cessation of diapirism. In comparison, the diapirism of calcium sulfate of the Leine Anhydrite into the Leine Halite members of cycle 3 of the Zechstein Formation probably occurred much later after burial and appears to have been triggered by halite diapirism, which in turn triggered the dehydration reaction, causing the calcium sulfate to become the incompetent phase relative to the halite. Published by Elsevier Science Ltd.

Rapanos v. United States & Carabell v. United States

Science.gov (United States)

Documents associated with guidance for implementing the definition of waters of the United States under the Clean Water Act following the Rapanos v. United States, and Carabell v. United States Supreme Court decision.

[The effect of disinfectant soaking on dental gypsum model size].

Science.gov (United States)

Zhu, Cao-yun; Xu, Yun-wen; Xu, Kan

2012-12-01

To study the influence of disinfectant soaking on the dimensional stability of three kinds of dental gypsum model. Three commonly used gypsums ( type III,IV,Vtype) in clinic were used to make 24 specimens for 50 mm×15 mm×10 mm in size. One hour after release, the specimens were placed for 24 h. A digital caliper was used to measure the size of the gypsum model. Distilled water immersion was as used control, glutaraldehyde disinfectant and Metrix CaviCide disinfectant soaking were used for the experimental group. After soaking for 0.5h, the gypsum models were removed and placed for 0.5 h, 1 h, 2 h, 24 h. The size of the models was measured again using the same method. The data was analyzed with SPSS10.0 software package. The initial gypsum model length was (50.07±0.017) mm, (50.048±0.015) mm and (50.027±0.015) mm. After soaking for different times, the size of the model changed little, and the dimensions changed less than 0.01%. The results show that disinfectant soaking has no significant effect on dental model dimensions.

Hydrogen sulfide release from dairy manure storages containing gypsum bedding

Science.gov (United States)

Recycled gypsum products can provide a cost-effective bedding alternative for dairy producers. Manufacturers report reduced odors, moisture and bacteria in the stall environment when compared to traditional bedding. Gypsum provides a sulfate source that can be converted to hydrogen sulfide under ana...

The Growth of Gypsum in the Presence of Hexavalent Chromium: A Multiscale Study

Directory of Open Access Journals (Sweden)

Juan Morales

2016-03-01

Full Text Available The sorption of dissolved inorganic pollutants into the structure of minerals is an important process that controls the mobility and fate of these pollutants in the Earth’s crust. It also modifies the surface structure and composition of the host mineral, affecting its crystallization kinetics. Here, we investigate the effect of hexavalent chromium, Cr(VI, on the nucleation and growth of gypsum by conducting two types of experiments: (i in situ atomic force microscopy (AFM observations of the growth of gypsum {010} surfaces in the presence of Cr(VI and (ii gypsum precipitation experiments by mixing aqueous solutions containing variable amounts of Cr(VI. Gypsum precipitation is progressively delayed when occurring from solutions bearing increasing Cr(VI concentrations. Chemical analyses of gypsum precipitates show that gypsum incorporates small Cr(VI amounts that correlate with the content of this ion in the aqueous solution. Gypsum cell parameters variation reflects this incorporation. At the molecular scale, Cr(VI induces a slowdown of step advance rates on gypsum {010} surfaces accompanied by the roughening of nanostep edges and the so-called “template effect”. This effect involves the reproduction of the original nanotopography after the completion of individual advancing monolayers and appears as a general nanoscale phenomenon occurring during growth of solid solutions from aqueous solutions even in the case of compositionally-restricted solid solutions.

Light in the darkening on Naica gypsum crystals

Energy Technology Data Exchange (ETDEWEB)

Castillo-Sandoval, I.; Fuentes-Cobas, L. E.; Esparza-Ponce, H. E.; Carreno-Márquez, J.; Montero-Cabrera, M. E., E-mail: elena.montero@cimav.edu.mx [Centro de Investigación en Materiales Avanzados (CIMAV), Miguel de Cervantes 120, Chihuahua, Chih 31109, México (Mexico); Fuentes-Montero, M. E. [Facultad de Ciencias Químicas, Universidad Autónoma de Chihuahua, Campus Universitario#2, Circuito Universitario, C.P.31125, Chihuahua, Chih. México (Mexico); Reyes-Cortes, M. [Facultad de Ingeniería. Universidad Autónoma de Chihuahua, Campus Universitario#2, Circuito Universitario, C.P.31125, Chihuahua, Chih. México (Mexico)

2015-07-23

Naica mine is located in a semi-desertic region at the central-south of Chihuahua State. The Cave of Swords was discovered in 1910 and the Cave of Crystals 90 years later at Naica mines. It is expected that during the last century the human presence has changed the microclimatic conditions inside the cave, resulting in the deterioration of the crystals and the deposition of impurities on gypsum surfaces. As a contribution to the clarification of the mentioned issues, the present work refers to the use of synchrotron radiation for the identification of phases on these surfaces. All the experiments were performed at the Stanford Synchrotron Radiation Lightsource. Grazing incidence X-ray diffraction (GIXRD) and radiography-aided X-ray diffraction (RAXRD) experiments were performed at beamline 11-3. X-Ray micro-fluorescence (μ-SXRF) and micro-X-ray absorption (μ-XANES) were measured at beamline 2-3. Representative results obtained may be summarized as follows: a) Gypsum, galena, sphalerite, hematite and cuprite at the surface of the gypsum crystals were determined. b) The samples micro-structure is affected by impurities. c) The elemental distributions and correlations (0.6-0.9) of Cu, K, Fe, Mn, Pb, Zn, Ca and S were identified by μ-SXRF. The correlations among elemental contents confirmed the phase identification, with the exception of manganese and potassium due to the amorphous nature of some impurity compounds in these samples. The compounds hematite (Fe{sub 2}O{sub 3}), β-MnO{sub 2}, Mn{sub 2}O{sub 3}, MnO and/or MnCO{sub 3}, PbS, PbCO{sub 3} and/or PbSO4, ZnO{sub 4}, ZnS and/or smithsonite (ZnCO{sub 3}), CuS + Cu Oxide were identified by XANES. Plausibly, these latter compounds do not form crystalline phases.

Light in the darkening on Naica gypsum crystals

International Nuclear Information System (INIS)

Castillo-Sandoval, I.; Fuentes-Cobas, L. E.; Esparza-Ponce, H. E.; Carreno-Márquez, J.; Montero-Cabrera, M. E.; Fuentes-Montero, M. E.; Reyes-Cortes, M.

2015-01-01

Naica mine is located in a semi-desertic region at the central-south of Chihuahua State. The Cave of Swords was discovered in 1910 and the Cave of Crystals 90 years later at Naica mines. It is expected that during the last century the human presence has changed the microclimatic conditions inside the cave, resulting in the deterioration of the crystals and the deposition of impurities on gypsum surfaces. As a contribution to the clarification of the mentioned issues, the present work refers to the use of synchrotron radiation for the identification of phases on these surfaces. All the experiments were performed at the Stanford Synchrotron Radiation Lightsource. Grazing incidence X-ray diffraction (GIXRD) and radiography-aided X-ray diffraction (RAXRD) experiments were performed at beamline 11-3. X-Ray micro-fluorescence (μ-SXRF) and micro-X-ray absorption (μ-XANES) were measured at beamline 2-3. Representative results obtained may be summarized as follows: a) Gypsum, galena, sphalerite, hematite and cuprite at the surface of the gypsum crystals were determined. b) The samples micro-structure is affected by impurities. c) The elemental distributions and correlations (0.6-0.9) of Cu, K, Fe, Mn, Pb, Zn, Ca and S were identified by μ-SXRF. The correlations among elemental contents confirmed the phase identification, with the exception of manganese and potassium due to the amorphous nature of some impurity compounds in these samples. The compounds hematite (Fe 2 O 3 ), β-MnO 2 , Mn 2 O 3 , MnO and/or MnCO 3 , PbS, PbCO 3 and/or PbSO4, ZnO 4 , ZnS and/or smithsonite (ZnCO 3 ), CuS + Cu Oxide were identified by XANES. Plausibly, these latter compounds do not form crystalline phases

Effects of gypsum and bulk density on neutron probe calibration curves

International Nuclear Information System (INIS)

Arslan, Awadis; Razzouk, A.K.

1993-10-01

The effects of gypsum and bulk density on the neutron probe calibration curve were studied in the laboratory and in the field. The effect of bulk density was negligible for the soil studied in the laboratory, while it was significant for the field calibration. An increase in the slope of moisture content on a volume basis vs. count ratio with increasing gypsum content at the soil was observed in the laboratory calibration. A simple method for correction of the calibration curve for gypsum content was adopted to obtain a specific curve for each layer. The adapted method requires the gypsum fraction to be estimated for each layer and then incorporated in the calibration curve to improve the coefficient of determination. A field calibration showed an improvement of the determination coefficient by introducing bulk density and gypsum fraction, in addition to count ratio using moisture content on a volume basis as a dependent variable in multi linear regression analysis. The same procedure was successful with variable gravel fractions. (author). 18 refs., 3 figs., 2 tabs

Tunisian gypsums: Characteristics and use in cement

Science.gov (United States)

Mahmoudi, Salah; Bennour, Ali; Chalwati, Youssef; Souidi, Khouloud; Thabet, Manel; Srasra, Ezzedine; Zargouni, Fouad

2016-09-01

Gypsum materials of hundred meters thickness and interbedded with marine claystones and limestones from different paleogeographic sectors in the Tunisian territory are studied to assess their suitability for cement production. For this reason, thirty representative samples are analysed by chemical, physical and geotechnical tests. The obtained results for the studied gypsum materials are compared to Tunisian and European norms and with the local cements, currently marketed and which obey international norms. Indeed, for all samples hydraulic modulus HM, silica modulus SM and alumina modulus AM vary from (2.37-2.44), (2.48-2.68) and (1.45-2.5), respectively; whereas the required values for these modulus are (1.5-2.5), (2-3) and (1.5-2.5). The same behavior is observed for mineralogical analyses of C3S, C2S, C3A and C4AF and compressive strength at different ages. Briefly, Tunisia contains important reserves of gypsum scattered and spread over the Tunisian territory and can be used for cement production.

Gypsum Formation during the Messinian Salinity Crisis: an Alternative Model

Science.gov (United States)

Grothe, A.; Krijgsman, W.; Sangiorgi, F.; Vasiliev, I.; Baak, C. V.; Wolthers, M.; Stoica, M.; Reichart, G. J.; Davies, G.

2016-12-01

During the Messinian Salinity Crisis (MSC; 5.97 - 5.33 Myr ago), thick packages of evaporites (gypsum and halite) were deposited in the Mediterranean Basin. Traditionally, the occurrence of these evaporites is explained by the so-called "desiccation-model", in which evaporites are considered to result from a (partly) desiccated basin. In the last decade, it was thought that changes in the Mediterranean-Atlantic connectivity could explain the formation of gypsum. Stable isotope studies, however, show that the gypsum formed under influence of large freshwater input. Here we present new strontium isotope data from two well-dated Messinian sections in the Black and Caspian Seas. Our Sr isotope records suggest a persistent Mediterranean-Black Sea connection throughout the salinity crisis, which implies a large additional freshwater source to the Mediterranean. We claim that low saline waters from the Black Sea region are a prerequisite for gypsum formation in the Mediterranean and speculate about the mechanisms explaining this apparent paradox.

Gypsum addition to soils contaminated by red mud: implications for aluminium, arsenic, molybdenum and vanadium solubility.

Science.gov (United States)

Lehoux, Alizée P; Lockwood, Cindy L; Mayes, William M; Stewart, Douglas I; Mortimer, Robert J G; Gruiz, Katalin; Burke, Ian T

2013-10-01

Red mud is highly alkaline (pH 13), saline and can contain elevated concentrations of several potentially toxic elements (e.g. Al, As, Mo and V). Release of up to 1 million m(3) of bauxite residue (red mud) suspension from the Ajka repository, western Hungary, caused large-scale contamination of downstream rivers and floodplains. There is now concern about the potential leaching of toxic metal(loid)s from the red mud as some have enhanced solubility at high pH. This study investigated the impact of red mud addition to three different Hungarian soils with respect to trace element solubility and soil geochemistry. The effectiveness of gypsum amendment for the rehabilitation of red mud-contaminated soils was also examined. Red mud addition to soils caused a pH increase, proportional to red mud addition, of up to 4 pH units (e.g. pH 7 → 11). Increasing red mud addition also led to significant increases in salinity, dissolved organic carbon and aqueous trace element concentrations. However, the response was highly soil specific and one of the soils tested buffered pH to around pH 8.5 even with the highest red mud loading tested (33 % w/w); experiments using this soil also had much lower aqueous Al, As and V concentrations. Gypsum addition to soil/red mud mixtures, even at relatively low concentrations (1 % w/w), was sufficient to buffer experimental pH to 7.5-8.5. This effect was attributed to the reaction of Ca(2+) supplied by the gypsum with OH(-) and carbonate from the red mud to precipitate calcite. The lowered pH enhanced trace element sorption and largely inhibited the release of Al, As and V. Mo concentrations, however, were largely unaffected by gypsum induced pH buffering due to the greater solubility of Mo (as molybdate) at circumneutral pH. Gypsum addition also leads to significantly higher porewater salinities, and column experiments demonstrated that this increase in total dissolved solids persisted even after 25 pore volume replacements. Gypsum

Effect of Time on Gypsum-Impression Material Compatibility

Science.gov (United States)

Won, John Boram

The purpose of this study was to evaluate the compatibility of dental gypsum with three recently introduced irreversible hydrocolloid (alginate) alternatives. The test materials were Alginot® (Kerr™), Position Penta Quick® (3M ESPE™) and Silgimix ® (Sultan Dental™). The irreversible hydrocolloid impression material, Jeltrate Plus antimicrobial® (Dentsply Caulk™) served as the control. Materials and Methods: Testing of materials was conducted in accordance with ANSI/ADA Specification No. 18 for Alginate Impression Materials. Statistical Analysis: The 3-Way ANOVA test was used to analyze measurements between different time points at a significance level of (p Outcome: It was found that there was greater compatibility between gypsum and the alternative materials over time than the traditional irreversible hydrocolloid material that was tested. A statistically significant amount of surface change/incompatibility was found over time with the combination of the dental gypsum products and the control impression material (Jeltrate Plus antimicrobial®).

Triple oxygen isotope systematics of structurally bonded water in gypsum

Science.gov (United States)

Herwartz, Daniel; Surma, Jakub; Voigt, Claudia; Assonov, Sergey; Staubwasser, Michael

2017-07-01

The triple oxygen isotopic composition of gypsum mother water (gmw) is recorded in structurally bonded water in gypsum (gsbw). Respective fractionation factors have been determined experimentally for 18O/16O and 17O/16O. By taking previous experiments into account we suggest using 18αgsbw-gmw = 1.0037; 17αgsbw-gmw = 1.00195 and θgsbw-gmw = 0.5285 as fractionation factors in triple oxygen isotope space. Recent gypsum was sampled from a series of 10 ponds located in the Salar de Llamara in the Atacama Desert, Chile. Total dissolved solids (TDS) in these ponds show a gradual increase from 23 g/l to 182 g/l that is accompanied by an increase in pond water 18O/16O. Gsbw falls on a parallel curve to the ambient water from the saline ponds. The offset is mainly due to the equilibrium fractionation between gsbw and gmw. However, gsbw represents a time integrated signal biased towards times of strong evaporation, hence the estimated gmw comprises elevated 18O/16O compositions when compared to pond water samples taken on site. Gypsum precipitation is associated with algae mats in the ponds with lower salinity. No evidence for respective vital effects on the triple oxygen isotopic composition of gypsum hydration water is observed, nor are such effects expected. In principle, the array of δ18Ogsbw vs. 17Oexcess can be used to: (1) provide information on the degree of evaporation during gypsum formation; (2) estimate pristine meteoric water compositions; and (3) estimate local relative humidity which is the controlling parameter of the slope of the array for simple hydrological situations. In our case study, local mining activities may have decreased deep groundwater recharge, causing a recent change of the local hydrology.

Comparison of the surface roughness of gypsum models constructed using various impression materials and gypsum products

Directory of Open Access Journals (Sweden)

Yi-Chih Chang

2016-03-01

Conclusion: The surface roughness of stone models was mainly determined by the type of alginate impression material, and was less affected by the type of silicone rubber impression material or gypsum product, or the storage time before repouring.

Optimization of the level and range of working temperature of the PCM in the gypsum-microencapsulated PCM thermal energy storage unit for summer conditions in Central Poland

Science.gov (United States)

Łapka, P.; Jaworski, M.

2017-10-01

In this paper thermal energy storage (TES) unit in a form of a ceiling panel made of gypsum-microencapsulated PCM composite with internal U-shaped channels was considered and optimal characteristics of the microencapsulated PCM were determined. This panel may be easily incorporated into, e.g., an office or residential ventilation system in order to reduce daily variations of air temperature during the summer without additional costs related to the consumption of energy for preparing air parameters to the desired level. For the purpose of the analysis of heat transfer in the panel, a novel numerical simulator was developed. The numerical model consists of two coupled parts, i.e., the 1D which deals with the air flowing through the U-shaped channel and the 3D which deals with heat transfer in the body of the panel. The computational tool was validated based on the experimental study performed on the special set-up. Using this tool an optimization of parameters of the gypsum-microencapsulated PCM composite was performed in order to determine its most appropriate properties for the application under study. The analyses were performed for averaged local summer conditions in Warsaw, Poland.

Attenuation characteristics of gypsum wallboard

International Nuclear Information System (INIS)

Christensen, Ralph C.; Sayeg, Joseph

1978-01-01

Increased cost of lead is promoting enhanced usage of common building materials for shielding in diagnostic medical and dental facilities where only a few half value layers (HVLs) are needed. We have measured attenuation of x-rays in gypsum wallboard as a function of kVp, filtration, and wallboard thickness. Our findings, obtained using a Victoreen 555 with an 0.1 DAS probe in poor geometry, are in agreement with the sparse data in the literature (Gross and McCullough (1977), Radiology 122: 825. Moos et al. (1961), Oral Surgery, Oral Medicine, and Oral Pathology 14: 569) but extend to thicker wall configurations and different kVp and filtration parameters. We conclude that gypsum wallboard as sole shielding material should be used with great caution. These findings are of value in maximizing the benefit/cost ratio for diagnostic shielding, and strengthen the conviction that, where used for shielding purposes, common building materials must be installed carefully and HVL-depth dependence considered thoroughly. (author)

Risk minimisation of FGD gypsum leachates by incorporation of aluminium sulphate

Energy Technology Data Exchange (ETDEWEB)

Alvarez-Ayuso, E. [Department of Environmental Geology, Institute of Earth Sciences ' Jaume Almera' (CSIC), C/ Lluis Sole i Sabaris, s/n, 08028 Barcelona (Spain); Department of Environmental Geochemistry, IRNASA, CSIC, Apto. 257, 37071 Salamanca (Spain)], E-mail: ealvarez@ija.csic.es; Querol, X. [Department of Environmental Geology, Institute of Earth Sciences ' Jaume Almera' (CSIC), C/ Lluis Sole i Sabaris, s/n, 08028 Barcelona (Spain); Ballesteros, J.C.; Gimenez, A. [Endesa Generacion, S.A., C/ Ribera de Loira, 60, 28042 Madrid (Spain)

2008-11-15

The incorporation of aluminium sulphate to (flue gas desulphurisation) FGD gypsum before its disposal was investigated as a way to minimise the risk supposed by the high fluoride content of its leachates. Using a bath method the kinetic and equilibrium processes of fluoride removal by aluminium sulphate were studied at fluoride/aluminium molar concentration (F/Al) ratios in the range 1.75 10{sup -2}-1.75 under the pH conditions (about 6.5) of FGD gypsum leachates. It was found that fluoride removal was a very fast process at any of the (F/Al) ratios subject of study, with equilibrium attained within the first 15 min of interaction. High decreases in solution fluoride concentrations (50-80%) were found at the equilibrium state. The use of aluminium sulphate in the stabilization of FGD gypsum proved to greatly decrease its fluoride leachable content (in the range 20-90% for aluminium sulphate doses of 0.1-5%, as determined by the European standard EN 12457-4). Such fluoride leaching minimisation assures the characterization of this by-product as a waste acceptable at landfills for non-hazardous wastes according to the Council Decision 2003/33/EC on waste disposal. Furthermore, as derived from column leaching studies, the proposed stabilization system showed to be highly effective in simulated conditions of disposal, displaying fluoride leaching reduction values about 55 and 80% for aluminium sulphate added amounts of 1 and 2%, respectively.

NOx photocatalytic degradation on gypsum plates modified by TiO2-N,C photocatalysts

Directory of Open Access Journals (Sweden)

Janus Magdalena

2015-09-01

Full Text Available In presented studies the photocatalytic decomposition of NOx on gypsum plates modified by TiO2-N,Cphotocatalysts were presented. The gypsum plates were obtained by addition of 10 or 20 wt.% of different types of titanium dioxide, such as: pure TiO2 and carbon and nitrogen co-modified TiO2 (TiO2-N,C to gypsum. TiO2-N,C photocatalysts were obtained by heating up the starting TiO2 (Grupa Azoty Zakłady Chemiczne Police S.A in the atmosphere of ammonia and carbon at the temperature: 100, 300 i 600ºC. Photocatalyst were characterized by FTIR/DRS, UVVis/DR, BET and XRD methods. Moreover the compressive strength tests of modified gypsum were also done. Photocatalytic activity of gypsum plates was done during NOx decomposition. The highest photocatalytic activity has gypsum with 20 wt.% addition of TiO2-N,C obtained at 300ºC.

Properties of mortars made by uncalcined FGD gypsum-fly ash-ground granulated blast furnace slag composite binder

International Nuclear Information System (INIS)

Zhong Shiyun; Ni Kun; Li Jinmei

2012-01-01

Highlights: ► The mortar with uncalcined FGD gypsum has suitable workability. ► The strength of mortar with uncalcined FGD gypsum is higher than that of mortar without uncalcined FGD gypsum. ► The dry shrinkage of mortar with uncalcined FGD gypsum is lower than that of mortar without uncalcined FGD gypsum. ► The leaching of sulfate ion of mortar is studied. - Abstract: A series of novel mortars were developed from composite binder of uncalcined FGD gypsum, fly ash (FA) and ground granulated blast furnace slag (GGBFS) for the good utilization of flue gas desulphurization (FGD) gypsum. At a fixed ratio (20%) of GGBFS to the composite binder, keeping consistency of the mortar between 9.5 and 10.0 cm, the properties of the composite mortar were studied. The results show that higher water/binder (W/B) is required to keep the consistency when increasing the percentage of FGD gypsum. No obvious influences of the W/B and content of FGD gypsum on the bleeding of paste were observed which keeps lower than 2% under all experimental conditions tried. The highest compressive and flexural strengths (ratio is 20% FGD gypsum, 20% GGBFS and 60% FA) are 22.6 and 4.3 MPa at 28 days, respectively. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) results indicate that massive ettringite crystals and C–S–H gels exist in the hydration products. At 90 days the mortars with FGD gypsum is dramatically smaller drying shrinkage (563–938 micro strain) than that without FGD gypsum (about 2250 micro strain). The release of the SO 4 2- from the mortar was analyzed, indicating that the dissolution of sulfate increases with FGD gypsum. The concentration of SO 4 2- releasing from the mortar with 10% FGD gypsum is almost equal to that obtained from the mortar without FGD gypsum. The release of SO 4 2- from the mortar with 20% FGD gypsum is 9200 mg·m −2 , which is lower than that from the mortar with 95% cement clinker and 5% FGD gypsum.

Mechanical, Hygric and Thermal Properties of Flue Gas Desulfurization Gypsum

Directory of Open Access Journals (Sweden)

P. Tesárek

2004-01-01

Full Text Available The reference measurements of basic mechanical, thermal and hygric parameters of hardened flue gas desulfurization gypsum are carried out. Moisture diffusivity, water vapor diffusion coefficient, thermal conductivity, volumetric heat capacity and linear thermal expansion coefficient are determined with the primary aim of comparison with data obtained for various types of modified gypsum in the future. 

Pre-contamination of new gypsum wallboard with potentially harmful fungal species

DEFF Research Database (Denmark)

Andersen, Birgitte; Dosen, Ina; Lewinska, Anna Malgorzata

2017-01-01

Gypsum wallboard is a popular building material, but is also very frequently overgrown by Stachybotrys chartarum after severe and/or undetected water damage. The purpose of this study was to determine whether Stachybotrys and other fungi frequently isolated from wet gypsum wallboard are already...

Hydrology of marginal evaporitic basins during the Messinian Salinity Crisis: isotopic investigation of gypsum deposits

Science.gov (United States)

El Kilany, Aida; Caruso, Antonio; Dela Pierre, Francesco; Natalicchio, Marcello; Rouchy, Jean-Marie; Pierre, Catherine; Balter, Vincent; Aloisi, Giovanni

2016-04-01

The deposition of gypsum in Messinian Mediterranean marginal basins is controlled by basin restriction and the local hydrological cycle (evaporation/precipitation rates and relative importance of continental vs marine water inputs). We are using the stable isotopic composition of gypsum as a proxy of the hydrological cycle that dominated at the moment of gypsum precipitation. We studied the Messinian Caltanissetta (Sicily) and Tertiary Piedmont (north western Italy) basins where we carried out a high-resolution isotopic study of gypsum layers composing gypsum-marl cycles. These cycles are thought to be the sedimentary expression of astronomical precession cycles, lasting approximately 20 kyr, during which the marginal basins experienced a succession of arid and a wet conditions. We determined the isotopic composition of gypsum hydration water (18O and D), of the sulphate ion (34S, 18O) and of Strontium (87/86Sr), all of which are potentially affected by the hydrological cycle. In our samples, the mother water from which gypsum precipitated is considerably lighter (-4.0 micro-scale. This is an essential step in interpreting the isotopic signals of gypsum because we can expect the 18O and D composition of Messinian continental input to be not too dissimilar from that of modern meteoric waters involved in diagenetic processes.

Authigenic gypsum in a deep sea core from Southeastern Arabian Sea

Digital Repository Service at National Institute of Oceanography (India)

Guptha, M.V.S.

Authigenic gypsum has been encountered in a deep sea core RC9-157 from the southeastern Arabian Sea at a depth of 4111 m which is a zone of lysocline. The formation of gypsum in the deep sea region is attributed to the prevailing sulphate rich...

Basic Properties of Flue-Gas Desulfurization Gypsum

Directory of Open Access Journals (Sweden)

Kovacs Ferenc

2003-03-01

Full Text Available Several hundred thousand of FGD gypsum is produced annually at the Matra Power Plant (Hungary as a byproduct of generating electricity and protecting the environment. Chemical and mechanical characteristics of this material were studied of the Department of Mining and Geotechnical Engineering, University of Miskolc (Hungary. The material in question was found dead gypsum which can be calcined easily to obtain a relatively high-strength (15-25 MPa and clean binding material. Furthermore, grain composites were made of it by adding fly ash, which the power plant can provide the expected producers with, thus decreasing the energy consumption of calcining and utilizing a small part of coal combustion wastes.

Lime and gypsum application on the wheat crop

Directory of Open Access Journals (Sweden)

Caires Eduardo Fávero

2002-01-01

Full Text Available Root growth and crop yield can be affected by chemical modifications of the soil profile owing to lime and gypsum applications. A field trial was carried out on a dystrophic Clayey Rhodic Hapludox at Ponta Grossa, PR, Brazil, aiming to evaluate lime (without or with incorporation into the soil and gypsum effects on root growth, mineral nutrition and grain yield of wheat (cv. OR 1. A randomized complete block design was used, with three replications, in a split-plot experiment. Treatments with dolomitic limestone (without lime and 4.5 t ha-1 of lime applied on the surface, in total rate and 1/3 of the requirement per year during 3 years, or incorporated into the soil were applied in July 1998 (main plots and the rates of gypsum (0, 3, 6 and 9 t ha-1 in October 1998 (subplots. Wheat was evaluated in the 2000 winter season. In conditions of water deficit absence, there was no limitation in root growth in depth, for exchangeable Ca of 6 mmol c dm-3. Lime incorporation of lime increased the Mg concentration in the leaves, but wheat yield was not influenced by the correction of soil acidity through liming treatments. Gypsum increased the concentrations of Ca and S in wheat leaves, with significant effects on grain yield. The critical level of S-SO4(2- in the 0-20 cm soil layer, extracted by ammonium acetate 0.5 mol L-1 in acetic acid 0.25 mol L-1, was 25.8 mg dm-3.

Influence of Flue Gas Desulfurization Gypsum Amendments on Heavy Metal Distribution in Reclaimed Sodic Soils

Science.gov (United States)

Chen, Qun; Wang, Shujuan; Li, Yan; Zhang, Ning; Zhao, Bo; Zhuo, Yuqun; Chen, Changhe

2015-01-01

Abstract Although flue gas desulfurization (FGD) gypsum has become an effective soil amendment for sodic soil reclamation, it carries extra heavy metal contamination into the soil environment. The fate of heavy metals introduced by FGD gypsum in sodic or saline–alkali soils is still unclear. This work aims to investigate the effects of FGD gypsum addition on the heavy metal distributions in a sodic soil. Original soil samples were collected from typical sodic land in north China. Soil column leaching tests were conducted to investigate the influence of FGD gypsum addition on the soil properties, especially on distribution profiles of the heavy metals (Pb, Cd, Cr, As, and Hg) in the soil layers. Results showed that pH, electrical conductivity, and exchangeable sodium percentage in amended soils were significantly reduced from 10.2 to 8.46, 1.8 to 0.2 dS/m, and 18.14% to 1.28%, respectively. As and Hg concentrations in the soils were found to be positively correlated with FGD gypsum added. The amount of Hg in the leachate was positively correlated with FGD gypsum application ratio, whereas a negative correlation was observed between the Pb concentration in the leachate and the FGD gypsum ratio. Results revealed that heavy metal concentrations in soils complied well with Environmental Quality Standard for Soils in China (GB15618-1995). This work helps to understand the fate of FGD gypsum-introduced heavy metals in sodic soils and provides a baseline for further environmental risk assessment associated with applying FGD gypsum for sodic soil remediation. PMID:26064038

Influence of Flue Gas Desulfurization Gypsum Amendments on Heavy Metal Distribution in Reclaimed Sodic Soils.

Science.gov (United States)

Chen, Qun; Wang, Shujuan; Li, Yan; Zhang, Ning; Zhao, Bo; Zhuo, Yuqun; Chen, Changhe

2015-06-01

Although flue gas desulfurization (FGD) gypsum has become an effective soil amendment for sodic soil reclamation, it carries extra heavy metal contamination into the soil environment. The fate of heavy metals introduced by FGD gypsum in sodic or saline-alkali soils is still unclear. This work aims to investigate the effects of FGD gypsum addition on the heavy metal distributions in a sodic soil. Original soil samples were collected from typical sodic land in north China. Soil column leaching tests were conducted to investigate the influence of FGD gypsum addition on the soil properties, especially on distribution profiles of the heavy metals (Pb, Cd, Cr, As, and Hg) in the soil layers. Results showed that pH, electrical conductivity, and exchangeable sodium percentage in amended soils were significantly reduced from 10.2 to 8.46, 1.8 to 0.2 dS/m, and 18.14% to 1.28%, respectively. As and Hg concentrations in the soils were found to be positively correlated with FGD gypsum added. The amount of Hg in the leachate was positively correlated with FGD gypsum application ratio, whereas a negative correlation was observed between the Pb concentration in the leachate and the FGD gypsum ratio. Results revealed that heavy metal concentrations in soils complied well with Environmental Quality Standard for Soils in China (GB15618-1995). This work helps to understand the fate of FGD gypsum-introduced heavy metals in sodic soils and provides a baseline for further environmental risk assessment associated with applying FGD gypsum for sodic soil remediation.

Incorporation of arsenic into gypsum: Relevant to arsenic removal and immobilization process in hydrometallurgical industry

Energy Technology Data Exchange (ETDEWEB)

Zhang, Danni; Yuan, Zidan [Key Laboratory of Pollution Ecology and Environmental Engineering, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016 (China); Wang, Shaofeng, E-mail: wangshaofeng@iae.ac.cn [Key Laboratory of Pollution Ecology and Environmental Engineering, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016 (China); Jia, Yongfeng, E-mail: yongfeng.jia@iae.ac.cn [Key Laboratory of Pollution Ecology and Environmental Engineering, Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016 (China); Demopoulos, George P. [Department of Mining and Materials Engineering, McGill University, Montreal, QC H3A 2B2 (Canada)

2015-12-30

Highlights: • Quantitatively studied the incorporation of arsenic into the structure of gypsum. • Arsenic content in the solid increased with pH and initial arsenic concentration. • Calcium arsenate phase precipitated in addition to gypsum at higher pH values. • The structure of gypsum and its morphology was altered by the incorporated arsenate. • The incorporated arsenate formed sainfeldite-like local structure in gypsum. - Abstract: Gypsum precipitates as a major secondary mineral during the iron-arsenate coprecipitation process for the removal of arsenic from hydrometallurgical effluents. However, its role in the fixation of arsenic is still unknown. This work investigated the incorporation of arsenic into gypsum quantitatively during the crystallization process at various pHs and the initial arsenic concentrations. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray absorption near edge spectroscopy (XANES) and scanning electron microscopy (SEM) were employed to characterize the coprecipitated solids. The results showed that arsenate was measurably removed from solution during gypsum crystallization and the removal increased with increasing pH. At lower pH where the system was undersaturated with respect to calcium arsenate, arsenate ions were incorporated into gypsum structure, whereas at higher pH, calcium arsenate was formed and constituted the major arsenate bearing species in the precipitated solids. The findings may have important implications for arsenic speciation and stability of the hydrometallurgical solid wastes.

Influence of shelf life on the setting time of type IV gypsum

Science.gov (United States)

Hapsari, M. L.; Irawan, B.; Damiyanti, M.

2017-08-01

Although expired materials can exhibit a deterioration in their properties, expired type IV gypsum can still be found on the market. In order to evaluate the influence of the shelf life on its setting time, two groups of type IV gypsum (GC Fuji rock EP) with different expiration dates were used in this research. The setting time tests were done in a mold using a Vicat Needle apparatus. The results of the statistical analysis showed a significant difference (pshelf life did influence the setting time of the type IV gypsum.

Gypsum and hydrohalite dynamics in sea ice brines

Science.gov (United States)

Butler, Benjamin M.; Papadimitriou, Stathys; Day, Sarah J.; Kennedy, Hilary

2017-09-01

Mineral authigenesis from their dissolved sea salt matrix is an emergent feature of sea ice brines, fuelled by dramatic equilibrium solubility changes in the large sub-zero temperature range of this cryospheric system on the surface of high latitude oceans. The multi-electrolyte composition of seawater results in the potential for several minerals to precipitate in sea ice, each affecting the in-situ geochemical properties of the sea ice brine system, the habitat of sympagic biota. The solubility of two of these minerals, gypsum (CaSO4 ·2H2O) and hydrohalite (NaCl · 2H2O), was investigated in high ionic strength multi-electrolyte solutions at below-zero temperatures to examine their dissolution-precipitation dynamics in the sea ice brine system. The gypsum dynamics in sea ice were found to be highly dependent on the solubilities of mirabilite and hydrohalite between 0.2 and - 25.0 ° C. The hydrohalite solubility between - 14.3 and - 25.0 ° C exhibits a sharp change between undersaturated and supersaturated conditions, and, thus, distinct temperature fields of precipitation and dissolution in sea ice, with saturation occurring at - 22.9 ° C. The sharp changes in hydrohalite solubility at temperatures ⩽-22.9 °C result from the formation of an ice-hydrohalite aggregate, which alters the structural properties of brine inclusions in cold sea ice. Favourable conditions for gypsum precipitation in sea ice were determined to occur in the region of hydrohalite precipitation below - 22.9 ° C and in conditions of metastable mirabilite supersaturation above - 22.9 ° C (investigated at - 7.1 and - 8.2 ° C here) but gypsum is unlikely to persist once mirabilite forms at these warmer (>-22.9 °C) temperatures. The dynamics of hydrohalite in sea ice brines based on its experimental solubility were consistent with that derived from thermodynamic modelling (FREZCHEM code) but the gypsum dynamics derived from the code were inconsistent with that indicated by its

Constraining the origin of the Messinian gypsum deposits using coupled measurement of δ^{18}O$/δD in gypsum hydration water and salinity of fluid inclusions

Science.gov (United States)

Evans, Nicholas P.; Gázquez, Fernando; McKenzie, Judith A.; Chapman, Hazel J.; Hodell, David A.

2016-04-01

We used oxygen and hydrogen isotopes of gypsum hydration water (GHW) coupled with salinity deduced from ice melting temperatures of primary fluid inclusions in the same samples (in tandem with 87Sr/86Sr, δ34S and other isotopic measurements) to determine the composition of the mother fluids that formed the gypsum deposits of the Messinian Salinity Crisis from shallow and intermediate-depth basins. Using this method, we constrain the origin of the Messinian Primary Lower Gypsum (PLG) of the Sorbas basin (Betic foreland) and both the Upper Gypsum (UG) and the Lower Gypsum of the Sicilian basin. We then compare these results to measurements made on UG recovered from the deep Ionian and Balearic basins drilled during DSDP Leg 42A. The evolution of GHW δ18O/δD vs. salinity is controlled by mixing processes between fresh and seawater, coupled with the degree of evaporation. Evaporation and subsequent precipitation of gypsum from fluids dominated by freshwater will result in a depressed 87Sr/86Sr values and different trajectory in δ18O/δD vs. salinity space compared to fluids dominated by seawater. The slopes of these regression equations help to define the end-members from which the fluid originated. For example, salinity estimates from PLG cycle 6 in the Sorbas basin range from 18 to 51ppt, and after correction for fractionation factors, estimated δ18O and δD values of the mother water are low (-2.6 meteoric water during gypsum deposition, while 87Sr/86Sr (0.708942 fall below those expected from the evaporation of seawater alone, the slope of the regression equation is similar to that of seawater evaporation. This implies that there is a change up-section from a dominantly marine environment in cycle 2 to a greater influence of meteoric water in cycle 6. The UG from the Sicilian basin display greater δ18O/δD values (2.9 meteoric water that subsequently underwent intense evaporation. This observation concurs with the low values of 87Sr/86Sr from the same UG

Investigation and dating of gypsum crystals from Sivrihisar region in Eskisehir by ESR and TL techniques

International Nuclear Information System (INIS)

2011-01-01

Gypsum crystals taken from Sivrihisar-Eskisehir district were investigated and dated by Electron Spin Resonance (ESR) and Thermoluminescence (TL) techniques. The natural ESR spectra of gypsum samples had also the signals of Mn 2 + in addition to the signal at g=2.009. It was observed that the intensity of ESR signal at g=2.009 increased with gamma irradiation dose. This ESR signal (g=2.009) was used as a dating signal in dating of gypsum samples. The only one TL peak at about 278 degree Celsius was observed in TL glow curves of nonirradiated gypsum sample. In the case of irradiated sample, TL peak at 157 degree Celsius was observed in addition of TL peak at 278 degree Celsius. Gypsum samples were irradiated with a 6 0Co gamma source. The ESR spectra and TL glow curve of gypsum samples were recorded by X-band ESR spectrometer and Risφ TL/OSL reader, respectively. For samples, ESR/TL dose-response curves was constructed. Dose-response curves were fitted with an exponential saturation function. Based on this model, accumulated dose (AD) values for dating are determined. 2 38U, 2 32Th and 4 0K analysis was carried out for gypsum crystals and dolomite which enveloped these gypsum crystals. The internal dose rate was calculated from 2 38U, 2 32Th and 4 0K analysis results of gypsum sample. The external dose rate was calculated by using 2 38U, 2 32Th and 4 0K analysis results of dolomite and cosmic dose rate. Internal and external gamma dose-rate was used for dating calculations. Because of successive recrystallization of gypsum sample after formation, calculated age values of gypsum is smaller than expected formation age.

Thermal conductivity of gypsum plasterboards : at ambient temperature and exposed to fire

NARCIS (Netherlands)

Korte, de A.C.J.; Brouwers, H.J.H.; Wald, F.; Kallerova, P.; Chlouba, J.

2009-01-01

One of the more complicated thermal properties to calculate for gypsum plasterboard is the thermal conductivity. The thermal conductivity is important because it plays an important role in the fire behaviour of gypsum plasterboards. Plasterboard often protects steel structures of buildings, because

Properties of mortars made by uncalcined FGD gypsum-fly ash-ground granulated blast furnace slag composite binder.

Science.gov (United States)

Zhong, Shiyun; Ni, Kun; Li, Jinmei

2012-07-01

A series of novel mortars were developed from composite binder of uncalcined FGD gypsum, fly ash (FA) and ground granulated blast furnace slag (GGBFS) for the good utilization of flue gas desulphurization (FGD) gypsum. At a fixed ratio (20%) of GGBFS to the composite binder, keeping consistency of the mortar between 9.5 and 10.0 cm, the properties of the composite mortar were studied. The results show that higher water/binder (W/B) is required to keep the consistency when increasing the percentage of FGD gypsum. No obvious influences of the W/B and content of FGD gypsum on the bleeding of paste were observed which keeps lower than 2% under all experimental conditions tried. The highest compressive and flexural strengths (ratio is 20% FGD gypsum, 20% GGBFS and 60% FA) are 22.6 and 4.3 MPa at 28 days, respectively. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) results indicate that massive ettringite crystals and C-S-H gels exist in the hydration products. At 90 days the mortars with FGD gypsum is dramatically smaller drying shrinkage (563-938 micro strain) than that without FGD gypsum (about 2250 micro strain). The release of the SO(4)(2-) from the mortar was analyzed, indicating that the dissolution of sulfate increases with FGD gypsum. The concentration of SO(4)(2-) releasing from the mortar with 10% FGD gypsum is almost equal to that obtained from the mortar without FGD gypsum. The release of SO(4)(2-) from the mortar with 20% FGD gypsum is 9200 mg·m(-2), which is lower than that from the mortar with 95% cement clinker and 5% FGD gypsum. Copyright © 2012 Elsevier Ltd. All rights reserved.

Design of Cold-Formed Steel Screw Connections with Gypsum Sheathing at Ambient and Elevated Temperatures

Directory of Open Access Journals (Sweden)

Wei Chen

2016-09-01

Full Text Available Load-bearing cold-formed steel (CFS walls sheathed with double layers of gypsum plasterboard on both sides have demonstrated good fire resistance and attracted increasing interest for use in mid-rise CFS structures. As the main connection method, screw connections between CFS and gypsum sheathing play an important role in both the structural design and fire resistance of this wall system. However, studies on the mechanical behavior of screw connections with double-layer gypsum sheathing are still limited. In this study, 200 monotonic tests of screw connections with single- or double-layer gypsum sheathing at both ambient and elevated temperatures were conducted. The failure of screw connections with double-layer gypsum sheathing in shear was different from that of single-layer gypsum sheathing connections at ambient temperature, and it could be described as the breaking of the loaded sheathing edge combined with significant screw tilting and the loaded sheathing edge flexing fracture. However, the screw tilting and flexing fracture of the loaded sheathing edge gradually disappear at elevated temperatures. In addition, the influence of the loaded edge distance, double-layer sheathing and elevated temperatures is discussed in detail with clear conclusions. A unified design formula for the shear strength of screw connections with gypsum sheathing is proposed for ambient and elevated temperatures with adequate accuracy. A simplified load–displacement model with the post-peak branch is developed to evaluate the load–displacement response of screw connections with gypsum sheathing at ambient and elevated temperatures.

Origin and diagenetic evolution of gypsum and microbialitic carbonates in the Late Sag of the Namibe Basin (SW Angola)

Science.gov (United States)

Laurent, Gindre-Chanu; Edoardo, Perri; Ian, Sharp R.; Peacock, D. C. P.; Roger, Swart; Ragnar, Poulsen; Hercinda, Ferreira; Vladimir, Machado

2016-08-01

Ephemeral evaporitic conditions developed within the uppermost part of the transgressive Late Sag sequence in the Namibe Basin (SW Angola), leading to the formation of extensive centimetre- to metre-thick sulphate-bearing deposits and correlative microbialitic carbonates rich in pseudomorphs after evaporite crystals. The onshore pre-salt beds examined in this study are located up to 25 m underneath the major mid-Aptian evaporitic succession, which is typified at the outcrop by gypsiferous Bambata Formation and in the subsurface by the halite-dominated Loeme Formation. Carbonate-evaporite cycles mostly occur at the top of metre-thick regressive parasequences, which progressively onlap and overstep landward the former faulted (rift) topography, or fill major pre-salt palaeo-valleys. The sulphate beds are made up of alabastrine gypsum associated with embedded botryoidal nodules, dissolution-related gypsum breccia, and are cross-cut by thin satin-spar gypsum veins. Nodular and fine-grained fabrics are interpreted as being diagenetic gypsum deposits resulting from the dissolution and recrystallisation of former depositional subaqueous sulphates, whereas gypsum veins and breccia result from telogenetic processes. The carbonates display a broader diversity of facies, characterised by rapid lateral variations along strike. Thin dolomitic and calcitic bacterial-mediated filamentous microbialitic boundstones enclose a broad variety of evaporite pseudomorphs and can pass laterally over a few metres into sulphate beds. Dissolution-related depositional breccias are also common and indicate early dissolution of former evaporite layers embedded within the microbialites. Sulphate and carbonate units are interpreted as being concomitantly deposited along a tide-dominated coastal supra- to intertidal- sabkha and constitute high-frequency hypersaline precursor events, prior to the accumulation of the giant saline mid-Aptian Bambata and Loeme Formations. Petrographic and geochemical

Effect of alginate chemical disinfection on bacterial count over gypsum cast.

Science.gov (United States)

Haralur, Satheesh B; Al-Dowah, Omir S; Gana, Naif S; Al-Hytham, Abdullah

2012-05-01

To evaluate the efficacy of sodium hypochlorite (1 : 10) and iodophor disinfectants on alginate impressions along with their effect on the survived bacterium count on the gypsum cast. Four alginate impression on each dentate patients were made, of which Group I were not washed or disinfected, Group II impressions were merely washed with water, Group III were disinfected by spraying with sodium hypochlorite (1 : 10), Group IV were disinfected with iodophor (1 : 213). Gypsum cast (type III) were made from all the impression. Impressions and gypsum cast were swabbed in mid palatal region for bacterial culture. Bacterial colony counting done after 3 days of incubation at 37℃ in blood agar media. The data obtained was analyzed by one way ANOVA test at a significant difference level of 0.05. Group I and Group II showed significantly more bacteria compared to Group III and Group IV. Bacterial colonies on the alginate impression and gypsum cast in group disinfected with Sodium hypochlorite (1 : 10) were 0.18, 0.82 respectively compared to group treated with iodophor (1 : 213). There was an increase in bacterial count on dental cast compared to source alginate impressions. Sodium hypochlorite (1 : 10) was found to be better disinfectant for alginate impression. There was an indication of increase in number of bacteria from alginate impression to making of dental cast. Additional gypsum cast disinfectant procedures need to be encouraged to completely eliminate cross infection to dental laboratory.

Gypsum amendment to soil can reduce selenium uptake by alfalfa grown in the presence of coal fly ash

International Nuclear Information System (INIS)

Arthur, M.A.; Rubin, G.; Woodbury, P.B.; Weinstein, L.H.

1993-01-01

Experiments in the field and greenhouse were conducted in the presence of coal fly ash to determine whether gypsum can reduce Se concentration in alfalfa (Medicago sativa L.). In the field experiment, conducted at a coal fly ash landfill, 11.2 t ha -1 gypsum was applied to soil as a top dressing to test the effect of gypsum in reducing selenium (Se) concentration in aboveground plant tissue. There were four treatment combinations of gypsum over a two year period, 1990, and 1991: (0, 0), (0, 11.2) (11.2, 0) and (11.2, 11.2). In 1991, the Se concentration was lower in alfalfa grown with gypsum, regardless of whether the gypsum was applied in both years or in only one year, indicating that the effect of gypsum application in the first year persisted into the second year. Since there was no increase in aboveground biomass with added gypsum, differences in Se concentration reflect a competitive interaction between S and Se. In the greenhouse experiment, 12 soil treatments were tested: three levels of fly ash (0, 10 and 20%) in combination with each of four levels of gypsum (0, 2.5, 5 and 7.5%). The Se concentration in alfalfa grown in 10% fly ash declined linearly with increasing gypsum dose, resulting in a reduction in Se concentration of 0.04 ± 0.02 μg g -1 for each 1% gypsum added for the first harvest and 0.06 ± 0.03 μg g -1 for each 1% gypsum added in the second harvest. Based on these results, gypsum may prove useful as a management tool to reduce the uptake of Se by plants growing on coal fly ash landfills

Sails: a new gypsum speleothem from Naica, Chihuahua, Mexico

Directory of Open Access Journals (Sweden)

Forti Paolo

2007-01-01

Full Text Available The caves of Naica (Chihuahua, Mexico are perhaps the most famous mine caves of the world due to the presence of giganticgypsum crystals. Nevertheless, very little research has been carried out on this karst area until now. A multidisciplinary investigationstarted in 2006 with the aim not only to define the genesis and the age of the Naica gypsum crystals, but also on other scientificaspects of these caves.This paper describes a completely new type of gypsum speleothem: the “sails”, observed only inside the Cueva de las Velas, one ofthe caves of the Naica system. This speleothem consists of extremely thin, elongated skeleton crystals that have grown epitaxiallyonly on the tips of the gypsum crystals pointing upward. The genesis of sails is strictly related to the environmental conditions setup inside the cave just after the artificial lowering of the groundwater by mine dewatering (less than 20 yr ago. In a few years sail speleothems will disappear entirely and therefore this study is fundamental to preserve at least the memory of them.

Determination of Radium 226 in mexican phosphate fertilizers and gypsum by gamma spectrometry

International Nuclear Information System (INIS)

Godinez A, M.C.

1995-01-01

The 226 Ra isotope was determined in 17, 20 and 46% m/m phosphate fertilizers and gypsum. The samples of the fertilizers were dissolved in 10% v/v nitric acid solutions. The barium sulphate method was used for the precipitation of 226 Ra. On the other hand, alkaline fusion method was used to separate the 226 Ra from gypsum. The results indicated that 226 Ra was present in the phosphate fertilizers and gypsum. The 226 Ra concentrations present in these materials were between 10 -4 - 10 -5 μg g -1 . (Author)

Oxidation of North Dakota scrubber sludge for soil amendment and production of gypsum. Final report

Energy Technology Data Exchange (ETDEWEB)

Hassett, D.J.; Moe, T.A.

1997-10-01

Cooperative Power`s Coal Creek Station (CCS) the North Dakota Industrial Commission, and the US Department of Energy provided funds for a research project at the Energy and Environmental Research Center. The goals of the project were (1) to determine conditions for the conversion of scrubber sludge to gypsum simulating an ex situ process on the laboratory scale; (2) to determine the feasibility of scaleup of the process; (3) if warranted, to demonstrate the ex situ process for conversion on the pilot scale; and (4) to evaluate the quality and handling characteristics of the gypsum produced on the pilot scale. The process development and demonstration phases of this project were successfully completed focusing on ex situ oxidation using air at low pH. The potential to produce a high-purity gypsum on a commercial scale is excellent. The results of this project demonstrate the feasibility of converting CCS scrubber sludge to gypsum exhibiting characteristics appropriate for agricultural application as soil amendment as well as for use in gypsum wallboard production. Gypsum of a purity of over 98% containing acceptable levels of potentially problematic constituents was produced in the laboratory and in a pilot-scale demonstration.

The hydrophobic modification of gypsum binder by peat products: physico-chemical and technological basis

Directory of Open Access Journals (Sweden)

O. Misnikov

2018-04-01

Full Text Available Gypsum binder is a quick-setting and fast-hardening material that is used widely in the construction industry for plastering and as an ingredient of concrete, other binding materials, etc. The issue addressed here is its short shelf life (around three months which arises because it is hygroscopic, i.e. it readily absorbs moisture and begins to set during transport and storage. The main methods that are currently available for protecting gypsum binder against unwanted exposure to moisture and water vapour are considered, and hydrophobic modification with the bitumen released during peat thermolysis (a method previously considered for cement is proposed as a promising alternative. Because there is overlap in the temperature ranges used in the manufacture of gypsum binder and those required for the initial stages of thermal decomposition of the organic matter in peat, it is expected that hydrophobisation could be achieved during the established manufacturing process without any changes to plant or procedures. The optimum concentration of organic (peat additive for gypsum rock mined from the Shushokskoye deposit in Russia is derived experimentally. With 0.5–1 % of peat additive, the strength grading of the gypsum plaster is preserved and its storage time without caking and hydration increases, even under adverse conditions (100 % relative humidity. The proposed method is compatible with current gypsum production technology, it does not require any changes in equipment, and the prices of mineral raw materials and semi-finished peat products are approximately the same. Thus, the incorporation of hydrophobic modification using peat into the manufacturing process for gypsum binder is unlikely to increase the cost of the product.

Crop Response to Gypsum Application to Subtropical Soils Under No-Till in Brazil: a Systematic Review

Directory of Open Access Journals (Sweden)

Tales Tiecher

2018-02-01

Full Text Available ABSTRACT The use of gypsum to improve the root environment in tropical soils in the southeastern and central-western regions of Brazil is a widespread practice with well-established recommendation criteria. However, only recently gypsum began to be used on subtropical soils in South of Brazil, so available knowledge of its effect on crop yield is incipient and mainly for soils under no-till (NT systems. Avaiable studies span a wide range of responses, from a substantial increase to a slight reduction in crop yield. Also, the specific conditions leading to a favorable effect of gypsum application on crop yield are yet to be accurately identified. The primary objectives of this study were to examine previously reported results to assess the likelihood of a crop response to gypsum and to develop useful recommendation criteria for gypsum application to subtropical soils under NT in Brazil. For this purpose, we examined the results of a total of 73 growing seasons, reported in 20 different scientific publications that assessed grain yield as a function of gypsum rates. Four different scenarios were examined, by the occurrence or not of high subsurface acidity (viz., Al saturation >20 % and/or exchangeable Ca 3 cmolc dm-3 failed to increase crop yield, irrespective of the soil water status. Under these conditions, high gypsum rates (6-15 Mg ha−1 may even reduce grain yield, possibly by inducing K and Mg deficiency. On the other hand, applying gypsum to soils with high subsurface acidity increased yield by 16 % in corn (87 % of cases and by 19 % in winter cereals (83 % of cases, whether or not the soil was water-deficient. By contrast, soybean yield was only increased by gypsum applied in the simultaneous presence of high soil subsurface acidity and water deficiency (average increase 27 %, 100 % of cases.

IMPACT OF NANOMODIFIERS ON MECHANICAL AND PHYSICAL PROPERTIES OF GYPSUM BINDERS

Directory of Open Access Journals (Sweden)

DEREVIANKO V. N.

2017-02-01

Full Text Available Summary. Problem statement. In the next 10 years, more than 90% of materials will be replaced with new materials – nanocomposites [1]. The nanocomponents application will allow manufacture of high-strength materials with reduced production cost and will ensure demand for products [2]. Researches aimed to determination of carbon nanotube type nanomodifier concentration impact on the physical and mechanical properties of gypsum binders are important today and must result in creation of competitive strong nano-materials. Purpose. Research of carbon nanotube (CNT type nanomodifier concentration impact on the physical and mechanical properties of gypsum binders. Conclusion. Sample microstructure analysis revealed that the non-modified gypsum sample structure is dominated by prismatic and lamellar crystals randomly distributed throughout the matrix volume. In this case, loose structure with increased porosity is formed, which results in sample mechanical strength reduction. In the CNT-modified gypsum matrix, well-ordered and homogeneous structure is formed with larger needle-shaped crystals, which results in the phase-contacting area increase, porosity reduction and thus the physical and mechanical characteristics improvement. It is experimentally proved that at the identical nano-modifier content in the gypsum matrix (0.035 %, maximum compression strength gain is achieved with the use of CNT and makes 28- 30%. At the use of initial carbon nanotubes, increase in strength at the same nano-modifier content makes 13-15%. The Ca2+ ions interaction with the graphene-like carbon surface was investigated by the DFT method. Capability is demonstrated of the covalent calcium bonding with the hexagonal carbon surface cell as a result of overlap of Ca2+ valence 3p orbitals and carbon 2р orbitals.

7 CFR 1220.615 - State and United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false State and United States. 1220.615 Section 1220.615... CONSUMER INFORMATION Procedures To Request a Referendum Definitions § 1220.615 State and United States. State and United States include the 50 States of the United States of America, the District of Columbia...

7 CFR 1220.129 - State and United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false State and United States. 1220.129 Section 1220.129... CONSUMER INFORMATION Soybean Promotion and Research Order Definitions § 1220.129 State and United States. The terms State and United States include the 50 States of the United States of America, the District...

Effect of shelf life on compressive strength of type iv gypsum

Science.gov (United States)

Kusumastuti, K. S.; Irawan, B.; Damiyanti, M.

2017-08-01

Type IV gypsum, as a dental material for an indirect restoration’s working model, should have strength and abrasive-resistant properties. These properties depend on the product’s shelf life and its proper storage, which sometimes are easily missed by sellers. The aim of this research was to observe the effect of shelf life on the compressive strength of type IV gypsum with different production dates. Twenty cylindrical specimens were separated into two groups with different production dates and tested with a universal testing with the crosshead speed of 1 mm per minute and a load of 2,500 kgf. The data were analyzed with independent t-tests. There was a significant difference (p<0.05) in the compressive strength between the two groups with an increase in compressive strength seen in the gypsum that was stored longer.

Use of FGD gypsum on a bermudagrass pasture in the Appalachian Plateau Region

Science.gov (United States)

Addition of industrial by-products from coal fired power plants (FGD gypsum and FGD gypsum + fly ash) are thought to increase plant production. Thus, a study was conducted to evaluate the effects of industrial by-products as a soil amendment on bermudagrass (Cynodon dactylon L.) yield. The study was...

Surface Coating of Gypsum-Based Molds for Maxillofacial Prosthetic Silicone Elastomeric Material: The Surface Topography.

Science.gov (United States)

Khalaf, Salah; Ariffin, Zaihan; Husein, Adam; Reza, Fazal

2015-07-01

This study aimed to compare the surface roughness of maxillofacial silicone elastomers fabricated in noncoated and coated gypsum materials. This study was also conducted to characterize the silicone elastomer specimens after surfaces were modified. A gypsum mold was coated with clear acrylic spray. The coated mold was then used to produce modified silicone experimental specimens (n = 35). The surface roughness of the modified silicone elastomers was compared with that of the control specimens, which were prepared by conventional flasking methods (n = 35). An atomic force microscope (AFM) was used for surface roughness measurement of silicone elastomer (unmodified and modified), and a scanning electron microscope (SEM) was used to evaluate the topographic conditions of coated and noncoated gypsum and silicone elastomer specimens (unmodified and modified) groups. After the gypsum molds were characterized, the fabricated silicone elastomers molded on noncoated and coated gypsum materials were evaluated further. Energy-dispersive X-ray spectroscopy (EDX) analysis of gypsum materials (noncoated and coated) and silicone elastomer specimens (unmodified and modified) was performed to evaluate the elemental changes after coating was conducted. Independent t test was used to analyze the differences in the surface roughness of unmodified and modified silicone at a significance level of p SEM analysis results showed evident differences in surface smoothness. EDX data further revealed the presence of the desired chemical components on the surface layer of unmodified and modified silicone elastomers. Silicone elastomers with lower surface roughness of maxillofacial prostheses can be obtained simply by coating a gypsum mold. © 2014 by the American College of Prosthodontists.

Investigation of the gypsum quality at three full-scale wet flue gas desulphurisation plants

DEFF Research Database (Denmark)

Hansen, Brian Brun; Kiil, Søren; Johnsson, Jan Erik

2011-01-01

In the present study the gypsum (CaSO4·2H2O) quality at three full-scale wet flue gas desulphurisation (FGD) plants and a pilot plant were examined and compared. Gypsum quality can be expressed in terms of moisture content (particle size and morphology dependent) and the concentration of residual......, low moisture content and low impurity content). An episode concerning a sudden deterioration in the gypsum dewatering properties was furthermore investigated, and a change in crystal morphology, as well as an increased impurity content (aluminium, iron and fluoride), was detected....

Crack Coalescence in Molded Gypsum and Carrara Marble

Science.gov (United States)

Wong, N.; Einstein, H. H.

2007-12-01

This research investigates the fracturing and coalescence behavior in prismatic laboratory-molded gypsum and Carrara marble specimens, which consist of either one or two pre-existing open flaws, under uniaxial compression. The tests are monitored by a high speed video system with a frame rate up to 24,000 frames/second. It allows one to precisely observe the cracking mechanisms, in particular if shear or tensile fracturing takes place. Seven crack types and nine crack coalescence categories are identified. The flaw inclination angle, the ligament length and the bridging angle between two flaws have different extents of influence on the coalescence patterns. For coplanar flaws, as the flaw inclination angle increases, there is a general trend of variation from shear coalescence to tensile coalescence. For stepped flaws, as the bridging angle changes from negative to small positive, and further up to large positive values, the coalescence generally progresses from categories of no coalescence, indirect coalescence to direct coalescence. For direct coalescence, it generally progresses from shear, mixed shear-tensile to tensile as the bridging angle increases. Some differences in fracturing and coalescence processes are observed in gypsum and marble, particularly the crack initiation in marble is preceded by the development of macroscopic white patches, but not in gypsum. Scanning Electron Microprobe (SEM) study reveals that the white patches consist of zones of microcracks (process zones).

Potential Agricultural Uses of Flue Gas Desulfurization Gypsum in the Northern Great Plains

Energy Technology Data Exchange (ETDEWEB)

DeSutter, T.M.; Cihacek, L.J. [North Dakota State University, Fargo, ND (United States). Department of Soil Science

2009-07-15

Flue gas desulfurization gypsum (FGDG) is a byproduct from the combustion of coal for electrical energy production. Currently, FGDG is being produced by 15 electrical generating stations in Alabama, Florida, Indiana, Iowa, Kentucky, Ohio, North Carolina, South Carolina, Tennessee, Texas, and Wisconsin. Much of this byproduct is used in the manufacturing of wallboard. The National Network for Use of FGDG in Agriculture was initiated to explore alternative uses of this byproduct. In the northern Great Plains (North Dakota, South Dakota, and Montana), FGDG has the potential to be used as a Ca or S fertilizer, as an acid soil ameliorant, and for reclaiming or mitigating sodium-affected soils. Greater than 1.4 million Mg of FGDG could initially be used in these states for these purposes. Flue gas desulfurization gypsum can be an agriculturally important resource for helping to increase the usefulness of problem soils and to increase crop and rangeland production. Conducting beneficial use audits would increase the public awareness of this product and help identify to coal combustion electrical generating stations the agriculturally beneficial outlets for this byproduct.

Influence of gypsum amendment on methane emission from paddy rice soil affected by saline irrigation water

Directory of Open Access Journals (Sweden)

Ei Ei eTheint

2016-01-01

Full Text Available To investigate the influence of gypsum application on methane (CH4 emission from paddy rice soil affected by saline irrigation water, two pot experiments with the rice cultivation were conducted. In pot experiment (I, salinity levels 30 mMNaCl (S30 and 90 mMNaCl (S90, that showed maximum and minimum CH4 production in an incubation experiment, respectively, were selected and studied without and with application of 1 Mg gypsum ha-1(G1. In pot experiment (II, CH4 emission was investigated under different rates of gypsum application: 1 (G1, 2.5 (G2.5 and 5 (G5 Mg gypsum ha-1 under a non-saline and saline condition of 25 mMNaCl (S25. In experiment (I, the smallest CH4 emission was observed in S90. Methane emission in S30 was not significantly different with the non-saline control. The addition of gypsum showed significant lower CH4 emission in saline and non-saline treatments compared with non-saline control. In experiment (II, the CH4 emissions in the saline treatments were not significantly different to the non-saline treatments except S25-G5. However, our work has shown that gypsum can lower CH4 emissions under saline and non-saline conditions. Thus, gypsum can be used as a CH4 mitigation option in non-saline as well as in saline conditions.

Preparation of gypsum/polymer composites using radiation

International Nuclear Information System (INIS)

Aji, Z.

2007-05-01

Gypsum composites have been prepared with different monomers using Gamma radiation: acrylamide, butyl acrylate, butyl methacrylate, methyl methacrylate, and methyl acrylate. The conversion of polymerization was determined as a function of absorbed dose. The data show that conversion of polymerization increases by increasing the dose.(author)

Soil composition and nutritional status of apple as affected by long-term application of gypsum

Directory of Open Access Journals (Sweden)

Gilberto Nava

2012-02-01

Full Text Available Gypsum does not affect the soil negative charges and maintains sulfate in the soil solution, making it one of the cheapest products to increase Ca activity in soil solution, especially in the deeper soil layers. Higher Ca levels in the soil solution can increase the uptake of this nutrient by apple trees, reducing the risk of physiological disorders caused by Ca deficiency. This study assessed the effect of long-term gypsum application on some soil properties and on the chemical composition of leaves and fruits of an apple cultivar susceptible to fruit disorders associated with low Ca. The experiment was conducted in São Joaquim, in the South of Brazil, from 2001 to 2009. Gypsum rates of 0, 1.0, 2.0 and 3.0 t ha-1 were annually broadcast over the soil surface, without incorporation, in an apple orchard with cultivar ´Catarina´, planted in 1997. Gypsum application over eight consecutive years had no effect on soil exchangeable K and Al to a depth of 80 cm, but increased exchangeable Ca in the sampled layers (0-10, 10-20, 40-60 and 60-80 cm, while exchangeable Mg decreased only in the surface layer (0-20 cm. Gypsum did not affect the concentration of any nutrient in the fruits, including Ca. The same was verified in the leaves, except for Mg which decreased with increased gypsum rate. Despite increasing the availability of Ca in the soil profile to a depth of 80 cm, gypsum was not effective to increase the Ca content in leaves and fruits of an apple cultivar susceptible to Ca deficiency grown in an appropriately limed soil.

Evaluation of Synthetic Gypsum Recovered via Wet Flue-Gas Desulfurization from Electric Power Plants for Use in Foundries

Directory of Open Access Journals (Sweden)

R. Biernacki

2012-09-01

Full Text Available This article investigates possible use of waste gypsum (synthetic, recovered via flue-gas desulfurization from coal-fired electric powerplants, in foundries. Energy sector, which in Eastern Europe is mostly composed from coal-fired electric power plants, is one of the largestproducers of sulfur dioxide (SO2.In order to protect the environment and reduce the amount of pollution flue-gas desulfurization (FGD is used to remove SO2 fromexhaust flue gases of fossil-fuel power plants. As a result of this process gypsum waste is produced that can be used in practicalapplications.Strength and permeability tests have been made and also in-depth analysis of energy consumption of production process to investigateways of preparing the synthetic gypsum for casting moulds application. This paper also assesses the chemical composition, strength andpermeability of moulds made with synthetic gypsum, in comparison with moulds made with traditional GoldStar XL gypsum and withceramic molds. Moreover examination of structure of synthetic gypsum, the investigations on derivatograph and calculations of energyconsumption during production process of synthetic gypsum in wet flue-gas desulfurization were made.After analysis of gathered data it’s possible to conclude that synthetic gypsum can be used as a material for casting mould. There is nosignificant decrease in key properties, and on the other hand there is many additional benefits including low energy consumption,decreased cost, and decreased environmental impact.

STRUCTURE AND PROPERTIES OF COMPOSITE MATERIAL BASED ON GYPSUM BINDER AND CARBON NANOTUBES

Directory of Open Access Journals (Sweden)

CHUMAK Anastasia Gennadievna

2013-04-01

Full Text Available The aim of this work is to carry out a number of studies in the area of nanomodi­fication of gypsum binder matrix and to investigate the influence of multilayer carbon nanotubes on the structure, physical and mechanical properties of obtained compos­ites. The study of the gypsum binders structure formation mechanisms with the use of nanoadditives makes it possible to control the production processes of gypsum materi­als and articles with the given set of properties. The main tasks of the binder nanomodification are: even distribution of carbon nanostructures over the whole volume of material and provision of stability for the nanodimensional modifier during production process of the construction composite.

7 CFR 1209.21 - State and United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false State and United States. 1209.21 Section 1209.21... Definitions § 1209.21 State and United States. (a) State means any of the several States, the District of Columbia, and the Commonwealth of Puerto Rico. (b) United States means collectively the several States of...

Preliminary Estimate of Gypsum Deposit Based on Wenner

African Journals Online (AJOL)

Dogara M. D. and Aloa J. O.

estimating the quantity of some possible deposits of gypsum. Just ... exploitation is an everyday activity that is currently going on, but, on a 'wild cat' ... important source of wealth for a nation, but before they are harnessed ..... REFERENCES.

Soil fertility, nutrition and yield of maize and barley with gypsum application on soil surface in no-till

Directory of Open Access Journals (Sweden)

Leandro Michalovicz

2014-10-01

Full Text Available Annual crop yield and nutrition have shown differentiated responses to modifications in soil chemical properties brought about by gypsum application. The aim of this study was to evaluate the effect of gypsum application rates on the chemical properties of a Latossolo Bruno (Clayey Oxisol, as well as on the nutrition and yield of a maize-barley succession under no-till. The experiment was set up in November 2009 in Guarapuava, Parana, Brazil, applying gypsum rates of 0.0, 1.5, 3.0, 4.5, and 6.0 Mg ha-1 to the soil surface upon sowing maize, with crop succession of barley. Gypsum application decreased the levels of Al3+ and Mg2+ in the 0.0-0.1 m layer and increased soil pH in the layers from 0.2-0.6 m depth. Gypsum application has increased the levels of Ca2+ in all soil layers up to 0.6 m, and the levels of S-SO4(2- up to 0.8 m. In both crops, the leaf concentrations of Ca and S were increased while Mg concentrations have decreased as a function of gypsum rates. There was also an effect of gypsum rates on grain yield, with a quadratic response of maize and a linear increase for barley. Yield increases were up to 11 and 12 % in relation to control for the maximum technical efficiency (MTE rates of 3.8 and 6.0 Mg ha-1 of gypsum, respectively. Gypsum application improved soil fertility in the profile, especially in the subsurface, as well as plant nutrition, increasing the yields of maize and barley.

A DOC coagulant, gypsum treatment can simultaneously reduce As, Cd and Pb uptake by medicinal plants grown in contaminated soil.

Science.gov (United States)

Kim, Hyuck Soo; Seo, Byoung-Hwan; Kuppusamy, Saranya; Lee, Yong Bok; Lee, Jae-Hwang; Yang, Jae-E; Owens, Gary; Kim, Kwon-Rae

2018-02-01

The efficiency of gypsum, as a dissolved organic carbon (DOC) coagulator, for the simultaneous immobilization of two heavy metals (Cd and Pb) and one metalloid (As) in agricultural soils near an abandoned mining site was examined. The agricultural soil was defined as long-term contaminated as As (1540mgkg -1 ), Cd (55mgkg -1 ) and Pb (1283mgkg -1 ) concentrations exceeded the Korean guideline values for As (25mgkg -1 ), Cd (4mgkg -1 ), and Pb (200mgkg -1 ). Gypsum was incorporated into the contaminated soil at 3% (w/w). In comparison two commonly using immobilizing agents (lime and compost), together with a mixture (lime+gypsum) were also included in the pot trial for the cultivation of two medical plants (A. gigas and A. macrocephala) and to evaluate the effectiveness of gypsum on As, Cd and Pb immobilization. The results showed that even though pH change-induced immobilizing agents such as lime were more effective than gypsum at immobilizing Cd and Pb, addition of gypsum also effectively reduced heavy metal phytoavailability as indicated by decreases in the concentration of Cd and Pb in medicinal plants. Furthermore, gypsum and gypsum+ lime were also most effective in reducing As concentrations in both plants studied. This was mainly attributed to significant decreases in soil DOC (48-64%) when gypsum and gypsum+lime were applied to the soil. Consequently, it was concluded that enhanced DOC coagulation with gypsum, could be considered as a promising technique for the immobilization of both metals (Cd and Pb) and metalloids (As) in agricultural soils. Copyright © 2017 Elsevier Inc. All rights reserved.

Composite Gypsum Binders with Silica-containing Additives

Science.gov (United States)

Chernysheva, N. V.; Lesovik, V. S.; Drebezgova, M. Yu; Shatalova, S. V.; Alaskhanov, A. H.

2018-03-01

New types of fine mineral additives are proposed for designing water-resistant Composite Gypsum Binders (CGB); these additives significantly differ from traditional quartz feed: wastes from wet magnetic separation of Banded Iron Formation (BIF WMS waste), nanodispersed silica powder (NSP), chalk. Possibility of their combined use has been studied as well.

7 CFR 1160.104 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true United States. 1160.104 Section 1160.104 Agriculture... Definitions § 1160.104 United States. United States means the 48 contiguous states in the continental United States and the District of Columbia, except that United States means the 50 states of the United States...

Competition between reaction-induced expansion and creep compaction during gypsum formation: Experimental and numerical investigation

Science.gov (United States)

Skarbek, R. M.; Savage, H. M.; Spiegelman, M. W.; Kelemen, P. B.; Yancopoulos, D.

2017-12-01

Deformation and cracking caused by reaction-driven volume increase is an important process in many geological settings, however the conditions controlling these processes are poorly understood. The interaction of rocks with reactive fluids can change permeability and reactive surface area, leading to a large variety of feedbacks. Gypsum is an ideal material to study these processes. It forms rapidly at room temperature via bassanite hydration, and is commonly used as an analogue for rocks in high-temperature, high-pressure conditions. We conducted uniaxial strain experiments to study the effects of applied axial load on deformation and fluid flow during the formation of gypsum from bassanite. While hydration of bassanite to gypsum involves a solid volume increase, gypsum exhibits significant creep compaction when in contact with water. These two volume changing processes occur simultaneously during fluid flow through bassanite. We cold-pressed bassanite powder to form cylinders 2.5 cm in height and 1.2 cm in diameter. Samples were compressed with a static axial load of 0.01 to 4 MPa. Water infiltrated initially unsaturated samples through the bottom face and the height of the samples was recorded as a measure of the total volume change. We also performed experiments on pure gypsum samples to constrain the amount of creep observed in tests on bassanite hydration. At axial loads 1 MPa, creep in the gypsum dominates and samples exhibit monotonic compaction. At intermediate loads, samples exhibit alternating phases of compaction and expansion due to the interplay of the two volume changing processes. We observed a change from net compaction to net expansion at an axial load of 0.250 MPa. We explain this behavior with a simple model that predicts the strain evolution, but does not take fluid flow into account. We also implement a 1D poro-visco-elastic model of the imbibition process that includes the reaction and gypsum creep. We use the results of these models, with

In Situ Observation of Gypsum-Anhydrite Transition at High Pressure and High Temperature

Institute of Scientific and Technical Information of China (English)

LIU Chuan-Jiang; ZHENG Hai-Fei

2012-01-01

An in-situ Raman spectroscopic study of gypsum-anhydrite transition under a saturated water condition at high pressure and high temperature is performed using a hydrothermal diamond anvil cell (HDAC).The experimental results show that gypsum dissolvs in water at ambient temperature and above 496 MPa.With increasing temperature,the anhydrite (CaSO4) phase precipitates at 250 320℃ in the pressure range of 1.0 1.5 GPa,indicating that under a saturated water condition,both stable conditions of pressure and temperature and high levels of Ca and SO4 ion concentrations in aqueous solution are essential for the formation of anhydrite.A linear relationship between the pressure and temperature for the precipitation of anhydrite is established as P(GPa) =0.0068T - 0.7126 (250℃≤T≤320℃).Anhydrite remained stable during rapid cooling of the sample chamber,showing that the gypsum-anhydrite transition involving both dissolution and precipitation processes is irreversible at high pressure and high temperature.%An in-situ Raman spectroscopic study of gypsum-anhydrite transition under a saturated water condition at high pressure and high temperature is performed using a hydrothermal diamond anvil cell (HDAC). The experimental results show that gypsum dissolvs in water at ambient temperature and above 496 Mpa. With increasing temperature, the anhydrite (CaSO4) phase precipitates at 250-320℃ in the pressure range of 1.0-1.5 Gpa, indicating that under a saturated water condition, both stable conditions of pressure and temperature and high levels of Ca and SO4 ion concentrations in aqueous solution are essential for the formation of anhydrite. A linear relationship between the pressure and temperature for the precipitation of anhydrite is established as P(Gpa) = 0.0068T - 0.7126 (250℃≤T≤320℃). Anhydrite remained stable during rapid cooling of the sample chamber, showing that the gypsum-anhydrite transition involving both dissolution and precipitation processes is

Gypsum and organic matter distribution in a mixed construction and demolition waste sorting process and their possible removal from outputs.

Science.gov (United States)

Montero, A; Tojo, Y; Matsuo, T; Matsuto, T; Yamada, M; Asakura, H; Ono, Y

2010-03-15

With insufficient source separation, construction and demolition (C&D) waste becomes a mixed material that is difficult to recycle. Treatment of mixed C&D waste generates residue that contains gypsum and organic matter and poses a risk of H(2)S formation in landfills. Therefore, removing gypsum and organic matter from the residue is vital. This study investigated the distribution of gypsum and organic matter in a sorting process. Heavy liquid separation was used to determine the density ranges in which gypsum and organic matter were most concentrated. The fine residue that was separated before shredding accounted for 27.9% of the waste mass and contained the greatest quantity of gypsum; therefore, most of the gypsum (52.4%) was distributed in this fraction. When this fine fraction was subjected to heavy liquid separation, 93% of the gypsum was concentrated in the density range of 1.59-2.28, which contained 24% of the total waste mass. Therefore, removing this density range after segregating fine particles should reduce the amount of gypsum sent to landfills. Organic matter tends to float as density increases; nevertheless, separation at 1.0 density could be more efficient. (c) 2009 Elsevier B.V. All rights reserved.

Effect of EDTA and gypsum on self diffusion coefficient of zinc in alkali soil

International Nuclear Information System (INIS)

Gupta, G.N.; Deb, D.L.

1981-01-01

The effect of EDTA and gypsum application on the rate of zinc diffusion was studied in an alkali soil. Gypsum application at the rate of half gypsum requirement (GR) increased the apparent self diffusion coefficient of zinc (DaZn) and decreased the capacity factor (B) of soil. The higher rates (full GR and double GR) depressed the rate of zinc diffusion and increased the B value. Application of EDTA at the rate of 0.77 μeg -1 of soil produced 1600 and 24 fold increase in DaZn and DpZn values respectively and 100 times drop in B value. Addition of 55 ppm Zn to the soil significantly increased the DaZn and DpZn values. (author)

Application of gypsum as shielding against low-energy X-radiation in the radiodiagnosis area

International Nuclear Information System (INIS)

Lins, J.A.G.; Lima, F.R.A.; Santos, M.A.P. dos; Oliveira, D.N.S. de; Silva, V.H.F.F. da

2017-01-01

In recent years, materials such as lead, concrete and iron have been studied for use as shielding for ionizing radiations of different energies in radiative installations. In the radiodiagnosis area, lead and barite are the most used materials as shielding. However, for beams of low energy X-radiation, such as in mammography and dentistry, the gypsum material may be used. This study aims to verify the feasibility of the use of gypsum as shielding for low-energy X-ray using standardized dental X-ray beams in a metrology laboratory. The project will allow a better understanding in the study of gypsum used as shielding, certifying its use as a good attenuator for low-energy X-ray

Evaluation of gypsum rates on greenhouse crop production

Science.gov (United States)

This study was to determine the potential of an added value distribution channel for gypsum waste by evaluating various greenhouse crops with captious pH and calcium needs. Three studies consisting of: Zonal geranium (Pelargonium x hortorum) and petunia (Petunia x hybrida); tomato (Solanum lycoper...

Reaction mechanism of reductive decomposition of FGD gypsum with anthracite

International Nuclear Information System (INIS)

Zheng, Da; Lu, Hailin; Sun, Xiuyun; Liu, Xiaodong; Han, Weiqing; Wang, Lianjun

2013-01-01

Highlights: • The reaction mechanism was different if the molar ratio of C/CaSO 4 was different. • The yield of CaO rises with an increase in temperature. • The optimal ratio of C/CaSO 4 = 1.2:1. • The decomposition process is mainly apparent solid–solid reaction with liquid-phase involved. - Abstract: The process of decomposition reaction between flue gas desulfurization (FGD) gypsum and anthracite is complex, which depends on the reaction conditions and atmosphere. In this study, thermogravimetric analysis with Fourier transform infrared spectroscopy (TGA-FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and the experiment in a tubular reactor were used to characterize the decomposition reaction in a nitrogen atmosphere under different conditions. The reaction mechanism analysis showed that the decomposition reaction process and mechanism were different when the molar proportion of C/CaSO 4 was changed. The experiment results showed that appropriate increase in the C/CaSO 4 proportion and higher temperatures were suitable for the formation of the main production of CaO, which can help us to understand the solid state reaction mechanism better. Via kinetic analysis of the reaction between anthracite and FGD gypsum under the optimal molar ratio of C/CaSO 4 , the mechanism model of the reaction was confirmed and the decomposition process was a two-step reaction which was in accordance with apparent solid–solid reaction

Accuracy of Gypsum Casts after Different Impression Techniques and Double Pouring.

Directory of Open Access Journals (Sweden)

Stephania Caroline Rodolfo Silva

Full Text Available This study evaluated the accuracy of gypsum casts after different impression techniques and double pouring. Ten patients were selected and for each one it was obtained 5 partial putty/wash impressions with vinyl polysiloxane (VPS material from teeth #13 to #16 with partial metal stock trays. The following techniques were performed: (1 one-step; two-step relief with: (2 PVC film; (3 slow-speed tungsten carbide bur and scalpel blade, (4 small movements of the tray and (5 without relief-negative control. The impressions were disinfected with 0.5% sodium hypochlorite for 10 minutes and stored during 110 and 230 minutes for the first and second pouring, respectively, with type IV gypsum. Three intra-oral lateral photographs of each patient were taken using a tripod and a customized radiographic positioner. The images were imported into ImageJ software and the total area of the buccal surface from teeth #13 to #16 was measured. A 4.0% coefficient of variance was criterion for using these measurements as Baseline values. The casts were photographed and analyzed using the same standardization for the clinical images. The area (mm2 obtained from the difference between the measurements of each gypsum cast and the Baseline value of the respective patient were calculated and analyzed by repeated-measures two way-ANOVA and Mauchly's Sphericity test (α = 0.05. No significant effect was observed for Impression technique (P = 0.23, Second pouring (P = 0.99 and their interaction (P = 0.25. The impression techniques and double pouring did not influence the accuracy of the gypsum casts.

Investigation of Parameters Affecting Gypsum Dewatering Properties in a Wet Flue Gas Desulphurization Pilot Plant

DEFF Research Database (Denmark)

Hansen, Brian Brun; Kiil, Søren

2012-01-01

of impurities (0.002 M Al2F6; 50 g quartz/L; 0.02 M Al3+, and 0.040 M Mg2+) were investigated. In addition, slurry from a full-scale wet FGD plant, experiencing formation of flat shaped crystals and poor gypsum dewatering properties, was transferred to the pilot plant to test if the plant would now start...... to time. In this work, the particle size distribution, morphology, and filtration rate of wet FGD gypsum formed in a pilot-scale experimental setup, operated in forced oxidation mode, have been studied. The influence of holding tank residence time (10–408 h), solids content (30–169 g/L), and the presence...... to produce low quality gypsum. The crystals formed in the pilot plant, on the basis of the full-scale slurry did, however, show acceptable filtration rates and crystal morphologies closer to the prismatic crystals from after pilot plant experiments with demineralized water. The gypsum slurry filtration rates...

Morphology and stability of aggregates of an Oxisol according to tillage system and gypsum application

Directory of Open Access Journals (Sweden)

Fábio Régis de Souza

2012-12-01

Full Text Available Morphological characterization and aggregate stability is an important factor in evaluating management systems. The aim of this paper is to evaluate the stability and morphology of the aggregates of a dystrophic Oxisol managed with no-tillage and conventional tillage with and without the residual action of gypsum. The experimental design was randomized blocks arranged in split-split plot, where the treatments were two soil management systems (plots with 0 and 2000 kg ha-1 of gypsum (subplots and five depths (0-0.05, 0.05-0.10, 0.10-0.15, 0.15-0.20 and 0.20-0.30 m as the subsubplots, with four replications. The aggregate morphology was determined through images and later evaluated by the Quantporo software. Stability was determined by the wet method. The results showed that the no-tillage system, with or without gypsum residual effect, provided the aggregates with the largest geometric diameters. The combination of no-tillage system and the gypsum residual effect provided rougher aggregates.

Biological sulfate removal from gypsum contaminated construction and demolition debris.

Science.gov (United States)

Kijjanapanich, Pimluck; Annachhatre, Ajit P; Esposito, Giovanni; van Hullebusch, Eric D; Lens, Piet N L

2013-12-15

Construction and demolition debris (CDD) contains high levels of sulfate that can cause detrimental environmental impacts when disposed without adequate treatment. In landfills, sulfate can be converted to hydrogen sulfide under anaerobic conditions. CDD can thus cause health impacts or odor problems to landfill employees and surrounding residents. Reduction of the sulfate content of CDD is an option to overcome these problems. This study aimed at developing a biological sulfate removal system to reduce the sulfate content of gypsum contaminated CDD in order to decrease the amount of solid waste, to improve the quality of CDD waste for recycling purposes and to recover sulfur from CDD. The treatment leached out the gypsum contained in CDD by water in a leaching column. The sulfate loaded leachate was then treated in a biological sulfate reducing Upflow Anaerobic Sludge Blanket (UASB) reactor to convert the sulfate to sulfide. The UASB reactor was operated at 23 ± 3 °C with a hydraulic retention time and upflow velocity of 15.5 h and 0.1 m h(-1), respectively while ethanol was added as electron donor at a final organic loading rate of 3.46 g COD L(-1) reactor d(-1). The CDD leachate had a pH of 8-9 and sulfate dissolution rates of 526.4 and 609.8 mg L(-1) d(-1) were achieved in CDD gypsum and CDD sand, respectively. Besides, it was observed that the gypsum dissolution was the rate limiting step for the biological treatment of CDD. The sulfate removal efficiency of the system stabilized at around 85%, enabling the reuse of the UASB effluent for the leaching step, proving the versatility of the bioreactor for practical applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

Relative Shock Effects in Mixed Powders of Calcite, Gypsum, and Quartz: A Calibration Scheme from Shock Experiments

Science.gov (United States)

Bell, Mary S.

2009-01-01

The shock behavior of calcite and gypsum is important in understanding the Cretaceous/Tertiary event and other terrestrial impacts that contain evaporite sediments in their targets. Most interest focuses on issues of devolatilization to quantify the production of CO2 or SO2 to better understand their role in generating a temporary atmosphere and its effects on climate and biota [e.g., papers in 1,2,3,4]. Devolatilization of carbonate is also important because the dispersion and fragmentation of ejecta is strongly controlled by the expansion of large volumes of gas during the impact process as well [5,6]. Shock recovery experiments for calcite yield seemingly conflicting results: early experimental devolatilization studies [7,8,9] suggested that calcite was substantially outgassed at 30 GPa (> 50%). However, the recent petrographic work of [10,11,12] presented evidence that essentially intact calcite is recovered from 60 GPa experiments. [13] reported results of shock experiments on anhydrite, gypsum, and mixtures of those phases with silica. Their observations indicate little or no devolatilization of anhydrite shocked to 42 GPa and that the fraction of sulfur, by mass, that degassed is approx.10(exp -2) of theoretical prediction. In another (preliminary) report of shock experiments on calcite, anhydrite, and gypsum, [14] observe calcite recrystallization when shock loaded at 61 GPa, only intensive plastic deformation in anhydrite shock loaded at 63 GPa, and gypsum converted to anhydrite when shock loaded at 56 GPa. [15] shock loaded anhydrite and quartz to a peak pressure of 60 GPa. All of the quartz grains were trans-formed to glass and the platy anhydrite grains were completely pseudomorphed by small crystallized anhydrite grains. However, no evidence of interaction between the two phases could be observed and they suggest that recrystallization of anhydrite grains is the result of a solid state transformation. [16] reanalyzed the calcite and anhydrite shock

Effect of amino acids on the precipitation kinetics and Ca isotopic composition of gypsum

Science.gov (United States)

Harouaka, Khadouja; Kubicki, James D.; Fantle, Matthew S.

2017-12-01

Stirred gypsum (CaSO4 · 2H2O) precipitation experiments (initial Ωgypsum = 2.4 ± 0.14, duration ≈ 1.0-1.5 h) were conducted in the presence of the amino acids glycine (190 μM), L-alanine (190 μM), D- and L-arginine (45 μM), and L-tyrosine (200 μM) to investigate the effect of simple organic compounds on both the precipitation kinetics and Ca isotopic composition of gypsum. Relative to abiotic controls, glycine, tyrosine, and alanine inhibited precipitation rates by ∼22%, 27%, and 29%, respectively, while L- and D-arginine accelerated crystal growth by ∼8% and 48%, respectively. With the exception of tyrosine, amino acid induced inhibition resulted in fractionation factors (αs-f) associated with precipitation that were no more than 0.3‰ lower than amino acid-free controls. In contrast, the tyrosine and D- and L-arginine experiments had αs-f values associated with precipitation that were similar to the controls. Our experimental results indicate that Ca isotopic fractionation associated with gypsum precipitation is impacted by growth inhibition in the presence of amino acids. Specifically, we propose that the surface-specific binding of amino acids to gypsum can change the equilibrium fractionation factor of the bulk mineral. We investigate the hypothesis that amino acids can influence the growth of gypsum at specific crystal faces via adsorption and that different faces have distinct fractionation factors (αface-fluid). Accordingly, preferential sorption of amino acids at particular faces changes the relative, face-specific mass fluxes of Ca during growth, which influences the bulk isotopic composition of the mineral. Density functional theory (DFT) calculations suggest that the energetic favorability of glycine sorption onto gypsum crystal faces occurs in the order: (1 1 0) > (0 1 0) > (1 2 0) > (0 1 1), while glycine sorption onto the (-1 1 1) face was found to be energetically unfavorable. Face-specific fractionation factors constrained by

31 CFR 800.225 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 800.225 Section 800... TAKEOVERS BY FOREIGN PERSONS Definitions § 800.225 United States. The term United States or U.S. means the United States of America, the States of the United States, the District of Columbia, and any commonwealth...

Dimensional accuracy and surface property of titanium casting using gypsum-bonded alumina investment.

Science.gov (United States)

Yan, Min; Takahashi, Hidekazu; Nishimura, Fumio

2004-12-01

The aim of the present study was to evaluate the dimensional accuracy and surface property of titanium casting obtained using a gypsum-bonded alumina investment. The experimental gypsum-bonded alumina investment with 20 mass% gypsum content mixed with 2 mass% potassium sulfate was used for five cp titanium castings and three Cu-Zn alloy castings. The accuracy, surface roughness (Ra), and reaction layer thickness of these castings were investigated. The accuracy of the castings obtained from the experimental investment ranged from -0.04 to 0.23%, while surface roughness (Ra) ranged from 7.6 to 10.3microm. A reaction layer of about 150 microm thickness under the titanium casting surface was observed. These results suggested that the titanium casting obtained using the experimental investment was acceptable. Although the reaction layer was thin, surface roughness should be improved.

Investigation on the Permeability Evolution of Gypsum Interlayer Under High Temperature and Triaxial Pressure

Science.gov (United States)

Tao, Meng; Yechao, You; Jie, Chen; Yaoqing, Hu

2017-08-01

The permeability of the surrounding rock is a critical parameter for the designing and assessment of radioactive waste disposal repositories in the rock salt. Generally, in the locations that are chosen for radioactive waste storage, the bedded rock salt is a sedimentary rock that contains NaCl and Na2SO4. Most likely, there are also layers of gypsum ( {CaSO}_{ 4} \\cdot 2 {H}_{ 2} {O)} present in the salt deposit. Radioactive wastes emit a large amount of heat and hydrogen during the process of disposal, which may result in thermal damage of the surrounding rocks and cause a great change in their permeability and tightness. Therefore, it is necessary to investigate the permeability evolution of the gypsum interlayer under high temperature and high pressure in order to evaluate the tightness and security of the nuclear waste repositories in bedded rock salt. In this study, a self-designed rock triaxial testing system by which high temperature and pressure can be applied is used; the μCT225kVFCB micro-CT system is also employed to investigate the permeability and microstructure of gypsum specimens under a constant hydrostatic pressure of 25 MPa, an increasing temperature (ranging from 20 to 650 °C), and a variable inlet gas pressure (1, 2, 4, 6 MPa). The experimental results show: (a) the maximum permeability measured during the whole experiment is less than 10-17 m2, which indicates that the gypsum interlayer has low permeability under high temperature and pressure that meet the requirements for radioactive waste repository. (b) Under the same temperature, the permeability of the gypsum specimen decreases at the beginning and then increases as the pore pressure elevates. When the inlet gas pressure is between 0 and 2 MPa, the Klinkenberg effect is very pronounced. Then, as the pore pressure increases, the movement behavior of gas molecules gradually changes from free motion to forced directional motion. So the role of free movement of gas molecules gradually

7 CFR 1150.106 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true United States. 1150.106 Section 1150.106 Agriculture... Order Definitions § 1150.106 United States. United States means the 48 contiguous States in the continental United States. ...

Estimates of the radiation dose from phospho-gypsum plaster-board if used in domestic buildings

International Nuclear Information System (INIS)

O'Brien, R.S.; Peggie, J.R.; Leith, I.S.

1991-02-01

This report presents the results of a study carried out to estimate the annual effective dose equivalent contribution from phospho-gypsum plaster-board if it were used as an internal lining in buildings. The study considered four sources of radiation exposure that would arise in such use, such as inhalation of 222 Rn and its daughters, inhalation of phospho-gypsum dust and exposure to beta and gamma radiation. Measurements of the 22 6Ra content and 222 Rn exhalation rate were made for a number of samples of phospho-gypsum plaster-board, and the behaviour of 222 Rn and its daughters in a typical building was modelled. The results of the study suggest that, for building ventilation rates greater than approximately 0.5 air changes per hour, the contribution to the total annual effective dose equivalent from inhalation of radon ( 222 Rn) and its daughters ( 218 Po, 214 Pb, 214 Po) exhaled from the phospho-gypsum plaster-board should be well below the recommended limit of 1 milli-Sievert for members of the public. The total annual effective dose equivalent from all these sources should be less than 0.6 milli-Sieverts, provided reasonable work practices are observed during installation of the phospho-gypsum plaster-board and the ventilation rate is kept above approximately 0.5 air changes per hour. 31 refs., 12 tabs., 5 figs

Malaria Treatment (United States)

Science.gov (United States)

... Providers, Emergency Consultations, and General Public. Contact Us Malaria Treatment (United States) Recommend on Facebook Tweet Share Compartir Treatment of Malaria: Guidelines For Clinicians (United States) Download PDF version ...

Polymeric-SiO2-PCMs for improving the thermal properties of gypsum applied in energy efficient buildings

International Nuclear Information System (INIS)

Borreguero, Ana M.; Serrano, Angel; Garrido, Ignacio; Rodríguez, Juan F.; Carmona, Manuel

2014-01-01

Highlights: • Inorganic–organic PCM microcapsules were incorporated into gypsum. • The physical and thermal properties of the gypsum composites were studied. • The gypsum composites presented better properties than some previously investigated. • 10.20 kW h/operating cycle could be saved in a room with 1 m 3 of this material. • 1.26 kg of CO 2 emissions could be reduced per one operating cycle. - Abstract: A new thermoregulating material containing the commercial paraffin Rubitherm®RT27 stabilized by SiO 2 with a polymeric shell from polystyrene–divinylbenzene (Polymeric-SiO 2 -PCMs) was incorporated into gypsum up to a 15 mass ratio respect to the initial hemihydrate in order to develop building materials with a high thermal energy store (TES) capacity. The effect of this material on the gypsum crystals and the main physical, thermal and mechanical properties were studied and compared to those caused by another three kinds of thermoregulating materials. Polymeric-SiO 2 -PCMs presented the lowest agglomeration and therefore, the best distribution into the gypsum pores. As expected, the thermoregulating effect of the PCM improved the thermal properties of the gypsum since, the higher the microcapsules content, the higher the equivalent heat capacity (c p ) and the accumulated heat power (q acc ). Considering a conversion of 100% of the accumulated heat into electricity savings, the addition of a 15% of microcapsules respect to the hemihydrate allowed to save 10.20 kW h/m 3 and, consequently, reduced the CO 2 emissions in a 1.26 kg of CO 2 per operating cycle. Besides, the addition of the Polymeric-SiO 2 -PCMs reduces the gypsum density, but it is always higher than 600 kg/m 3 , as required by the European regulation EN 13279-2. The thermal conductivity (k) is also reduced by the microcapsules addition but for the case of a content of 15%. On the other hand, the porosity is barely affected just varying always less than a 3.5%. Finally, despite of the

Achievement report for fiscal 2000 on development of technology to recycle disintegrated waste gypsum boards; 1999 nendo kaitai haisekko board no saishigenka gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Investigations and researches have been made on disintegrated waste gypsum boards generated in building demolishing sites, with a target of recycling them as a raw material for boards. In the investigations, the actual status of discarding the disintegrated gypsum boards was identified, whereas the harmful substance contents such as of heavy metals were verified to be below the environmental criteria. As a method to remove impurities and foreign materials from the disintegrated waste gypsum boards, the hydration crushing method was established, in which volumetric change when hemihydrate gypsum returns to gypsum dehydrate is utilized, and bond of gypsum particles with each other and with impurities is destructed to separate them into simple substances. Furthermore, discussions were given on the reforming conditions to reform in an energy saving manner the disintegrated waste gypsum boards into high-quality large-size hemihydrate gypsum by using the wet-type process that utilizes the reversible reaction between hemihydrate gypsum and gypsum dehydrate in the disintegrated waste gypsum boards. A manufacturing process to put the recycled gypsum into practical use was also discussed. Prototype board fabrication and tests were performed by using the reformed gypsum board materials, wherein good results were obtained from all of the practical, chemical, and physical tests. (NEDO)

Testing CO2 Sequestration in an Alkaline Soil Treated with Flue Gas Desulfurization Gypsum (FGDG)

Science.gov (United States)

Han, Y.; Tokunaga, T. K.

2012-12-01

Identifying effective and economical methods for increasing carbon storage in soils is of interest for reducing soil CO2 fluxes to the atmosphere in order to partially offset anthropogenic CO2 contributions to climate change This study investigates an alternative strategy for increasing carbon retention in soils by accelerating calcite (CaCO3) precipitation and promoting soil organic carbon (SOC) complexation on mineral surfaces. The addition of calcium ion to soils with pH > 8, often found in arid and semi-arid regions, may accelerate the slow process of calcite precipitation. Increased ionic strength from addition of a soluble Ca source also suppresses microbial activity which oxidizes SOC to gaseous CO2. Through obtaining C mass balances in soil profiles, this study is quantifying the efficiency of gypsum amendments for mitigating C losses to the atmosphere. The objective of this study is to identify conditions in which inorganic and organic C sequestration is practical in semi-arid and arid soils by gypsum treatment. As an inexpensive calcium source, we proposed to use flue gas desulfurization gypsum (FGDG), a byproduct of fossil fuel burning electric power plants. To test the hypothesis, laboratory column experiments have been conducted in calcite-buffered soil with addition of gypsum and FGDG. The results of several months of column monitoring are demonstrating that gypsum-treated soil have lowered amounts of soil organic carbon loss and increased inorganic carbon (calcite) production. The excess generation of FGDG relative to industrial and agricultural needs, FGDG, is currently regarded as waste. Thus application of FGDG application in some soils may be an effective and economical means for fixing CO2 in soil organic and inorganic carbon forms.Soil carbon cycle, with proposed increased C retention by calcite precipitation and by SOC binding onto soil mineral surfaces, with both processes driven by calcium released from gypsum dissolution.

7 CFR 65.255 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false United States. 65.255 Section 65.255 Agriculture..., PEANUTS, AND GINSENG General Provisions Definitions § 65.255 United States. United States means the 50... United States. ...

Petroleum Sludge as gypsum replacement in cement plants: Its Impact on Cement Strength

Science.gov (United States)

Benlamoudi, Ali; Kadir, Aeslina Abdul; Khodja, Mohamed

2017-08-01

Due to high cost of cement manufacturing and the huge amount of resources exhaustion, companies are trying to incorporate alternative raw materials or by-products into cement production so as to produce alternative sustainable cement. Petroleum sludge is a dangerous waste that poses serious imparts on soil and groundwater. Given that this sludge contains a high percentage of anhydrite (CaSO4), which is the main component of gypsum (CaSO4.2H2O), it may play the same gypsum role in strength development. In this research, a total replacement of gypsum (100%) has been substituted by petroleum sludge in cement production and has led to an increase of 28.8% in UCS values after 28 curing days. Nevertheless, the burning of this waste has emitted a considerable amount of carbon monoxide (CO) gas that needs to be carefully considered prior to use petroleum sludge within cement plants.

7 CFR 1250.308 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1250.308 Section 1250.308 Agriculture... Research and Promotion Order Definitions § 1250.308 United States. United States means the 48 contiguous States of the United States of America and the District of Columbia. ...

7 CFR 1205.23 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1205.23 Section 1205.23 Agriculture... Procedures for Conduct of Sign-up Period Definitions § 1205.23 United States. The term United States means the 50 states of the United States of America. Procedures ...

Thermal Dehydration Kinetics of Gypsum and Borogypsum under Non-isothermal Conditions

Institute of Scientific and Technical Information of China (English)

I.Y.Elbeyli; S.Piskin

2004-01-01

Thermal dehydration of gypsum and borogypsum was investigated under nonisothermal conditions in air by using simultaneous thermogravimetric-differential thermal analyzer. Nonisothermal experiments were carried out at various linear heating rates. Kinetics of dehydration in the temperature range of 373-503 K were evaluated from the DTA (differential thermal analysis)-TGA (thermogravimetric analysis) data by means of Coats-Redfern,Kissinger and Doyle Equations. Values of the activation energy and the pre-exponential factor of the dehydration were calculated. The results of thermal experiments and kinetic parameters indicated that borogypsum is similar to gypsum from dehydration mechanism point of view although it consists of boron and small amount of alkali metal oxides.

Visible and Mid-Infrared Gypsum Optical Constants for Modeling of Martian Deposits

Science.gov (United States)

Roush, Ted L.; Esposito, Francesca; Rossmann, George R.; Colangeli, Luigi

2007-08-01

Introduction: Recent and on-going remote and in situ observations indicate that sulfates are present in significant abundances at various locations on Mars [1-7]. The Mars Reconnaissance Orbiter (MRO) imaging spectrometer (CRISM) is returning hyperspectral data at higher spatial resolution [8] than the OMEGA instrument on the Mars Express Mission [3]. Data from both OMEGA and CRISM have provided spectral evidence for the presence of gypsum and various hydrated sulfates on the Martian surface [e.g. 3-7] Thus, the optical properties of sulfates, in general, are of interest to quantitative interpretation of this increasing volume of remotely sensed data. This is because optical constants describe how a material interacts with electromagnetic radiation and represent the fundamental values used in radiative transfer calculations describing a variety of physical environments. Such environments include atmospheres where aerosols are present, planetary and satellite regoliths, and circumstellar dust clouds. Here we focus upon gypsum because of its applicability due to its identification on Mars. Also, gypsum is a mineral that is readily available in samples sizes that are suitable for study using a variety of spectral measurements. In the infrared (>5 μm) several studies reporting the optical constants of gypsum can be used in evaluating the approach used here. Most importantly, there is a general lack of data regarding the optical constants for gypsum at visible and mid-infrared wavelengths (0.4-5 μm) that are being observed by OMEGA and CRISM. Background: In the infrared, there have been several studies focused at determining the optical constants of gypsum using classical dispersion models [9-11]. These have used a variety of samples including; crystals, compressed pellets of pure materials, and grains suspended in a KBr matrix. Spectral measurements of gypsum, and other sulfates, have existed for about 100 years at visible and mid-infrared wavelengths (0.4-5 μm) [e

Analysis of cubic and orthorhombic C3A hydration in presence of gypsum and lime

KAUST Repository

Kirchheim, A. P.; Fernà ndez-Altable, V.; Monteiro, P. J. M.; Dal Molin, D. C. C.; Casanova, I.

2009-01-01

Field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) have been used to study the microstructural changes and phase development that take place during the hydration of cubic (pure) and orthorhombic (Na-doped) tricalcium aluminate (C3A) and gypsum in the absence and presence of lime. The results demonstrate that important differences occur in the hydration of each C3A polymorph and gypsum when no lime is added; orthorhombic C3A reacts faster with gypsum than the cubic phase, forming longer ettringite needles; however, the presence of lime slows down the formation of ettringite in the orthorhombic sample. Additional rheometric tests showed the possible effects on the setting time in these cementitious mixes.

Analysis of cubic and orthorhombic C3A hydration in presence of gypsum and lime

KAUST Repository

Kirchheim, A. P.

2009-02-26

Field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) have been used to study the microstructural changes and phase development that take place during the hydration of cubic (pure) and orthorhombic (Na-doped) tricalcium aluminate (C3A) and gypsum in the absence and presence of lime. The results demonstrate that important differences occur in the hydration of each C3A polymorph and gypsum when no lime is added; orthorhombic C3A reacts faster with gypsum than the cubic phase, forming longer ettringite needles; however, the presence of lime slows down the formation of ettringite in the orthorhombic sample. Additional rheometric tests showed the possible effects on the setting time in these cementitious mixes.

31 CFR 597.318 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 597.318 Section 597... General Definitions § 597.318 United States. The term United States means the United States, its territories, states, commonwealths, districts, and possessions, and all areas under the jurisdiction or...

7 CFR 1219.26 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1219.26 Section 1219.26 Agriculture..., AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.26 United States. United States means collectively the several 50 States of the United States, the District of...

7 CFR 1212.31 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1212.31 Section 1212.31 Agriculture..., Consumer Education, and Industry Information Order Definitions § 1212.31 United States. “United States... territories and possessions of the United States. ...

22 CFR 120.13 - United States.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false United States. 120.13 Section 120.13 Foreign... United States. United States, when used in the geographical sense, includes the several states, the Commonwealth of Puerto Rico, the insular possessions of the United States, the District of Columbia, the...

Implications of moisture content determination in the environmental characterisation of FGD gypsum for its disposal in landfills

Energy Technology Data Exchange (ETDEWEB)

Alvarez-Ayuso, E. [Department of Environmental Geology, Institute of Earth Sciences ' Jaume Almera' (CSIC), C/ Lluis Sole i Sabaris s/n, 08028 Barcelona (Spain)], E-mail: ealvarez@ija.csic.es; Querol, X. [Department of Environmental Geology, Institute of Earth Sciences ' Jaume Almera' (CSIC), C/ Lluis Sole i Sabaris s/n, 08028 Barcelona (Spain); Tomas, A. [Endesa Generacion, S.A., C/ Ribera de Loira 60, 28042 Madrid (Spain)

2008-05-01

The leachable contents of elements of environmental concern considered in the Council Decision 2003/33/EC on waste disposal were determined in flue gas desulphurisation (FGD) gypsum. To this end, leaching tests were performed following the standard EN-12457-4 which specifies the determination of the dry mass of the material at 105 deg. C and the use of a liquid to solid (L/S) ratio of 10 l kg{sup -1} dry matter. Additionally, leaching tests were also carried out taking into account the dry mass of the material at 60 deg. C and using different L/S ratios (2, 5, 8, 10, 15 and 20 l kg{sup -1} dry matter). It was found that the dry mass determination at 105 deg. C turns out to be inappropriate for FGD gypsum since at this temperature gypsum transforms into bassanite, and so, in addition to moisture content, crystalline water is removed. As a consequence the moisture content is overvalued (about 16%), what makes consider a lower L/S ratio than that specified by the standard EN-12457-4. As a result the leachable contents in FGD gypsum are, in general, overestimated, what could lead to more strict environmental requirements for FGD gypsum when considering its disposal in landfills, specially concerning those elements (e.g., F) risking the characterisation of FGD gypsum as a waste acceptable at landfills for non-hazardous wastes.

Why does carbon increase in highly weathered soil under no-till upon lime and gypsum use?

Science.gov (United States)

Inagaki, Thiago Massao; de Moraes Sá, João Carlos; Caires, Eduardo Fávero; Gonçalves, Daniel Ruiz Potma

2017-12-01

Field experiments have been used to explain how soil organic carbon (SOC) dynamics is affected by lime and gypsum applications, however, how SOC storage occurs is still debatable. We hypothesized that although many studies conclude that Ca-based soil amendments such as lime and gypsum may lead to SOC depletion due to the enhancement of microbial activity, the same does not occur under conservation agriculture conditions. Thus, the objective of this study was to elucidate the effects of lime and gypsum applications on soil microbial activity and SOC stocks in a no-till field and in a laboratory incubation study simulating no-till conditions. The field experiment was established in 1998 in a clayey Oxisol in southern Brazil following a completely randomized blocks design with a split-plot arrangement and three replications. Lime and gypsum were surface applied in 1998 and reapplied in 2013. Undisturbed soil samples were collected before the treatments reapplications, and one year after. The incubation experiment was carried out during 16months using these samples adding crop residues on the soil surface to simulate no-till field conditions. Lime and gypsum applications significantly increased the labile SOC stocks, microbial activity and soil fertility attributes in both field and laboratory experiments. Although the microbial activity was increased, no depletion of SOC stocks was observed in both experiments. Positive correlations were observed between microbial activity increase and SOC gains. Labile SOC and Ca 2+ content increase leads to forming complex with mineral soil fractions. Gypsum applications performed a higher influence on labile SOC pools in the field than in the laboratory experiment, which may be related to the presence of active root system in the soil profile. We conclude that incubation experiments using lime and gypsum in undisturbed samples confirm that soil microbial activity increase does not deplete SOC stocks under conservation agriculture

31 CFR 592.311 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 592.311 Section 592... § 592.311 United States. The term United States, when used in the geographic sense, means the several States, the District of Columbia, and any commonwealth, territory, or possession of the United States. ...

7 CFR 1205.313 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1205.313 Section 1205.313 Agriculture... Research and Promotion Order Definitions § 1205.313 United States. United States means the 50 States of the United States of America. [31 FR 16758, Dec. 31, 1966. Redesignated at 56 FR 64472, Dec. 10, 1991] ...

The effect of magnesium on partial sulphate removal from mine water as gypsum.

Science.gov (United States)

Tolonen, Emma-Tuulia; Rämö, Jaakko; Lassi, Ulla

2015-08-15

The aim of this research was to investigate the effect of magnesium on the removal efficiency of sulphate as gypsum from mine water. The precipitation conditions were simulated with MINEQL + software and the simulation results were compared with the results from laboratory jar test experiments. Both the simulation and the laboratory results showed that magnesium in the mine water was maintaining sulphate in a soluble form as magnesium sulphate (MgSO4) at pH 9.6. Thus magnesium was preventing the removal of sulphate as gypsum (CaSO4·2H2O). However, change in the lime precipitation pH from 9.6 to 12.5 resulted in magnesium hydroxide (Mg(OH)2) precipitation and improved sulphate removal. Additionally, magnesium hydroxide could act as seed crystals for gypsum precipitation or co-precipitate sulphate further enhancing the removal of sulphate from mine water. Copyright © 2015 Elsevier Ltd. All rights reserved.

31 CFR 542.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 542.310 Section 542.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....310 United States. The term United States means the United States, its territories and possessions...

31 CFR 548.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 548.310 Section 548.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....310 United States. The term United States means the United States, its territories and possessions...

31 CFR 546.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 546.310 Section 546.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....310 United States. The term United States means the United States, its territories and possessions...

31 CFR 586.318 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 586.318 Section 586...) KOSOVO SANCTIONS REGULATIONS General Definitions § 586.318 United States. The term United States means the United States, its territories and possessions, and all areas under the jurisdiction or authority...

31 CFR 537.318 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 537.318 Section 537.318 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....318 United States. The term United States means the United States, its territories and possessions...

31 CFR 585.316 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 585.316 Section 585.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 585.316 United States. The term United States means the United States, its...

31 CFR 575.319 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 575.319 Section 575.319 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....319 United States. The term United States means the United States, its territories and possessions...

31 CFR 539.312 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 539.312 Section 539.312 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 539.312 United States. The term United States means the United States, its...

31 CFR 551.309 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 551.309 Section 551.309 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF....309 United States. The term United States means the United States, its territories and possessions...

31 CFR 587.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 587.310 Section 587...) MILOSEVIC SANCTIONS REGULATIONS General Definitions § 587.310 United States. The term United States means the United States, its territories and possessions, and all areas under the jurisdiction or authority...

31 CFR 547.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 547.310 Section 547.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 547.310 United States. The term United States means the United States, its...

Intermediate Temperature Fuel Cell Using Gypsum Based Electrolyte And Electrodes

International Nuclear Information System (INIS)

Suzuki, Satoshi; Nagai, Masayuki; Katagiri, Yuji

2011-01-01

The proton conductive electrolyte membrane and the electrodes for intermediate temperature fuel cell were made from the phosphoric acid treated gypsum as a proton conductor. The membrane and the electrodes were built into single cell and tested at intermediate temperature region. The power density of the fuel cell was 0.56 mW/cm -2 at 150 deg. C without any humidification and 1.38 mW/cm -2 at 150 deg. C, 5% relative humidity. The open circuit voltage of the cell was increased higher than 0.7 V when the electrodes were annealed at 150 deg. C, 5%R.H., however the reasons for this are still to be further investigated. The results show that the potential of the phosphoric acid treated gypsum for the intermediate temperature proton conductor.

31 CFR 598.317 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 598.317 Section 598.317 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 598.317 United States. The term United States means the United States, its territories and...

31 CFR 596.312 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 596.312 Section 596.312 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 596.312 United States. The term United States means the United States, including its...

31 CFR 538.314 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 538.314 Section 538.314 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 538.314 United States. The term United States means the United States, its territories and possessions...

31 CFR 543.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 543.310 Section 543.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 543.310 United States. The term United States means the United States, its territories and...

31 CFR 594.313 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 594.313 Section 594.313 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 594.313 United States. The term United States means the United States, its territories and...

31 CFR 588.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 588.310 Section 588.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 588.310 United States. The term United States means the United States, its territories and...

31 CFR 536.315 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 536.315 Section 536.315 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 536.315 United States. The term United States means the United States, its territories and...

31 CFR 544.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 544.310 Section 544.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... REGULATIONS General Definitions § 544.310 United States. The term United States means the United States, its...

31 CFR 545.313 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 545.313 Section 545.313 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... Definitions § 545.313 United States. The term United States means the United States, its territories and...

31 CFR 595.314 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 595.314 Section 595.314 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 595.314 United States. The term United States means the United States, its territories and possessions...

31 CFR 560.307 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 560.307 Section 560.307 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 560.307 United States. The term United States means the United States, including its territories and...

31 CFR 593.311 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 593.311 Section 593.311 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... REGULATIONS General Definitions § 593.311 United States. The term United States means the United States, its...

31 CFR 541.310 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 541.310 Section 541.310 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 541.310 United States. The term United States means the United States, its territories and possessions...

31 CFR 540.313 - United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 540.313 Section 540.313 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... REGULATIONS General Definitions § 540.313 United States. The term United States means the United States, its...

GE`s worldwide experience with IFO based gypsum producing flue gas desulfurization systems

Energy Technology Data Exchange (ETDEWEB)

Saleem, A. [GE Environmental Systems, Lebanon, PA (United States)

1994-12-31

The In-Situ Forced Oxidation (IFO) process to produce gypsum in a commercial scale flue gas desulfurization (FGD) system was first demonstrated by GE Environmental Systems in 1980 at the Monticello Generating Station of Texas Utilities. Since then, the IFO technology developed and demonstrated by GE has become the industry standard and is used extensively on a world-wide basis to produce both commercial and disposable-grade gypsum. The paper gives an overview of the development, demonstration, commercial design and current status of the IFO technology.

An analysis of the persistent presence of opportunistic pathogens on patient-derived dental impressions and gypsum casts.

Science.gov (United States)

Egusa, Hiroshi; Watamoto, Takao; Abe, Keike; Kobayashi, Munemasa; Kaneda, Yoshitoshi; Ashida, Shunji; Matsumoto, Takuya; Yatani, Hirofumi

2008-01-01

This study aimed to assess the persistent presence of microorganisms on patient-derived dental impressions and gypsum casts, while highlighting important human pathogens such as Candida, methicillin-resistant Staphylococcus aureus (MRSA), and Pseudomonas aeruginosa. The practices and opinions regarding cross-infection control from 59 general dentists in Japan were obtained via a questionnaire. Alginate impressions were made from 56 patients. Using a brain heart infusion agar medium, impression and imprint cultures were carried out to visualize the microbial contamination on the surfaces of the impressions and gypsum casts, respectively. The colonies on the surfaces of the 30 impression cultures and 26 imprint cultures were collected by swabbing and then inoculated onto selective agar plates to detect streptococci, staphylococci, Candida, MRSA, and P aeruginosa. The questionnaire showed that only 54% of general dentists had a cross-infection policy in their dental clinics, and only 30% to 40% were aware of the possible persistence of MRSA or P aeruginosa on impressions and gypsum casts. The impression/imprint cultures grew a large number of visible bacterial colonies on all of impression/gypsum cast samples investigated. Selective agar cultures demonstrated the presence of streptococci (100, 100%), staphylococci (56.7, 65.4%), Candida (30, 46.2%), MRSA (26.7, 15.4%), and P aeruginosa (6.7, 7.7%) on the impressions and the gypsum casts, respectively. This investigation showed that patient-derived dental impressions and gypsum casts are contaminated with numerous microbes, including Candida, MRSA, and P aeruginosa, which are known pathogens responsible for nosocomial and/or life-threatening infection in the immunocompromised host.

Growth of cowpea plants inoculated with Rhizobium in a saline-sodic soil after application of gypsum

Directory of Open Access Journals (Sweden)

Angela Jessyka Pereira Brito Fontenele

Full Text Available Two experiments were carried out with the aim of evaluating the growth of cowpea cultivated in saline-sodic soils corrected with gypsum: one experiment in the laboratory, to identify the best level of gypsum for the correction of the saline-sodic soils of the state of Pernambuco, Brazil; and the other in a greenhouse, after correction of the soils. As the test plant, the cowpea cultivar pele de moça, inoculated with Rhizobium strain BR3267 was used. The experiments were arranged in a randomised block design in a 2 x 5 factorial arrangement, two soils and five levels of the gypsum requirement (GR, equivalent to 50, 100, 150, 200 and 250% of the GR of the soil, as determined by the Schoonover M-1 method, with five replications. The following were evaluated: electrical conductivity of the soil saturation extract (EC, soil exchangeable sodium and percentage of soil exchangeable sodium (ESP, number of nodules (NN, nodule dry weight (NDW, shoot dry weight (SDW, shoot height (PH and nitrogen concentration (N in the shoots. Application of 100% of the GR, followed by the enough water for leaching, was effective for the correction of soil sodicity. The application of increasing levels of soil GR resulted in an increase in the number of nodules, dry weight of the nodules and shoots, and the height and levels of N absorbed by the plants in soil S2. In soil S1, the use of levels of 200 and 250% of soil the GR caused a decrease in all the variables under study.

7 CFR 1206.23 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1206.23 Section 1206.23 Agriculture... INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.23 United States. United... Rico, and the territories and possessions of the United States. ...

Flue gas desulfurization gypsum and fly ash

International Nuclear Information System (INIS)

1992-05-01

The Cumberland Fossil Plant (CUF) is located in Stewart County, Tennessee, and began commercial operation in 1972. This is the Tennessee Valley Authority's newest fossil (coal-burning) steam electric generating plant. Under current operating conditions, the plant burns approximately seven million tons of coal annually. By-products from the combustion of coal are fly ash, approximately 428,000 tons annually, and bottom ash, approximately 115,000 tons annually. Based on historical load and projected ash production rates, a study was initially undertaken to identify feasible alternatives for marketing, utilization and disposal of ash by-products. The preferred alternative to ensure that facilities are planned for all by-products which will potentially be generated at CUF is to plan facilities to handle wet FGD gypsum and dry fly ash. A number of different sites were evaluated for their suitability for development as FGD gypsum and ash storage facilities. LAW Engineering was contracted to conduct onsite explorations of sites to develop information on the general mature of subsurface soil, rock and groundwater conditions in the site areas. Surveys were also conducted on each site to assess the presence of endangered and threatened species, wetlands and floodplains, archaeological and cultural resources, prime farmland and other site characteristics which must be considered from an environmental perspective

7 CFR 1215.20 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1215.20 Section 1215.20 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... United States. United States means all of the States. Popcorn Board ...

Aplicação de gesso e calcário na recuperação de solos salino-sódicos do Estado de Pernambuco Application of gypsum and limestone in the reclamation of saline-sodic soils of the Pernambuco State

Directory of Open Access Journals (Sweden)

Maria de F. C. Barros

2005-09-01

Full Text Available Experimento em colunas de solo foi conduzido, objetivando-se avaliar o efeito da aplicação de gesso e gesso + calcário, na recuperação de solos salino-sódicos do Perímetro Irrigado de Custódia, PE. Os tratamentos foram dispostos em um delineamento em blocos casualizados, com arranjo fatorial de quatro solos, dois métodos de aplicação de gesso e gesso + calcário (aplicados na superfície e incorporados aos primeiros 5 cm da coluna de solo, duas combinações dos corretivos (100% de gesso + 0% de calcário e 80% de gesso + 20% de calcário, calculados com base na necessidade de gesso dos solos, e quatro faixas de granulometria de gesso (2,0-1,0, 1,0-0,5, 0,5-0,3 e An experiment was carried out in soil columns with the objective of evaluating the effect of application of gypsum and limestone on reclamation of the saline-sodic soils in the Irrigation district of Custódia, PE. The treatments were arranged in a randomized block design in a factorial scheme of four soils, two methods for applications of gypsum and gypsum plus limestone (applied on surface and incorporated into the first five cm of the soil column, two combinations of the chemical amendments (100% gypsum plus 0% limestone and 80% gypsum plus 20% limestone, calculated on the basis of gypsum requirement of soil and four granulometry gypsum strips (2.0-1.0; 1.0-0.5; 0.5-0.3 and < 0.3 mm with three replications. The gypsum amount determined by the method of Schoonover M-1, under laboratory conditions, shows to be adequate in the displacement of the exchangeable sodium of the soil exchange complex. The efficiency of the gypsum as well as the gypsum plus lime mixture in reclamation of the soils shows to be superior, when the amendments are incorporated into the first 5 cm of the soil columns. Among the gypsum granulometry, the finest fractions, (0.5-0.3 mm and < 0.3 mm, presented better performance in replacing the exchangeable sodium of the exchange complex.

Manufacturing of calcium phosphate scaffolds by pseudomorphic transformation of gypsum

Energy Technology Data Exchange (ETDEWEB)

Araujo Batista, H. de.; Batista Cardoso, M.; Sales Vasconcelos, A.; Vinicius Lia Fook, M.; Rodriguez Barbero, M. A.; Garcia Carrodeguas, R.

2016-08-01

Carbonated hydroxyapatite (CHAp) and β-tricalcium phosphate (β-TCP) have been employed for decades as constituents of scaffolds for bone regeneration because they chemically resemble bone mineral. In this study, the feasibility to manufacture CHAp/β-TCP scaffolds by pseudomorphic transformation of casted blocks of gypsum was investigated. The transformation was carried out by immersing the precursor gypsum block in 1 M (NH{sub 4}){sub 2}HPO{sub 4}/1.33 M NH{sub 4}OH solution with liquid/solid ratio of 10 mL/g and autoclaving at 120 degree centigrade and 203 kPa (2 atm) for 3 h at least. Neither shape nor dimensions significantly changed during transformation. The composition of scaffolds treated for 3 h was 70 wt.% CHAp and 30 wt.% β-TCP, and their compressive and diametral compressive strengths were 6.5 ± 0.7 and 5.3 ±0.7 MPa, respectively. By increasing the time of treatment to 6 h, the composition of the scaffold enriched in β-TCP (60 wt.% CHAp and 40 wt.% β-TCP) but its compressive and diametral compressive strengths were not significantly affected (6.7 ± 0.9 and 5.4 ± 0.6 MPa, respectively). On the basis of the results obtained, it was concluded that this route is a good approach to the manufacturing of biphasic (CHAp/β-TCP) scaffolds from previously shaped pieces of gypsum. (Author)

Surface controlled dissolution rates of gypsum in aqueous solutions exhibit nonlinear dissolution kinetics

Science.gov (United States)

Jeschke, Alexander A.; Vosbeck, Katrin; Dreybrodt, Wolfgang

2001-01-01

The effective dissolution rates of gypsum are determined by mixed kinetics, where the rate constants of dissolution at the surface and the transport constant of molecular diffusion of dissolved material are similar. To obtain the surface reaction rate law it is necessary to know the transport constant. We have determined the surface rate law for monocrystalline selenite by using a rotating disc set-up, where the transport coefficients are well known. As a result, up to a calcium concentration of 0.6 · ceq, we find a nearly linear rate law Rs = ksl (1- cs/ ceq) n1, where cs is the total calcium concentration at the surface and ceq the equilibrium concentration with respect to gypsum, n1 = 1.2 ± 0.2, and ksl = 1.1 · 10 -4 mmol cm -2 s -1 ± 15%. We also employed batch-experiments for selenite, alabaster and gypsum rock samples. The result of these experiments were interpreted by using a transport constant determined by NaCl dissolution experiments under similar physical conditions. The batch experiments reveal a dissolution rate law Rs = ksl (1- cs/ ceq) n1, ksl = 1.3 · 10 -4 mmol · cm -2 s -1, n1 = 1.2 ± 0.2 for c ≤ 0.94 · ceq. Close to equilibrium a nonlinear rate law, Rs = ks2 (1- cs/ ceq) n2, is observed, where ks2 is in the order of 10 mmol · cm -2 s -1 and n2 ≈ 4.5. The experimentally observed gypsum dissolution rates from the batch experiments could be accurately fitted, with only minor variations of the surface reaction constant obtained from the rotating disk experiment and the transport coefficient from the NaCl dissolution batch experiment. Batch experiments on pure synthetic gypsum, reveal a linear rate law up to equilibrium. This indicates inhibition of dissolution in natural samples close to equilibrium, as is known also for calcite minerals.

7 CFR 1280.127 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1280.127 Section 1280.127 Agriculture... INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.127 United States. United States means collectively the 50 States and the District of Columbia. ...

Assessment of groundwater contamination by gypsum dissolution in San Luis Potosí (México) using geoelectrical characterization

Science.gov (United States)

Arango-Galvan, C.; Ramos-Leal, J. A.; Yáñez-Rodríguez, M. A.; Corbo-Camargo, F.

2017-12-01

The Cerritos and Río Verde aquifers in San Luis Potosí (central México) make up a very complex aquifer system that is seriously affected by the overexploitation and the high concentration of sulphates. Currently, it is partially closed for extraction causing a substantial decrease in per capita drinking water availability affecting to more than 50,000 inhabitants in the region. Therefore, a very comprehensive study has been proposed in order to evaluate not only the groundwater contamination distribution but also to better know the aquifer configuration and its main hydrogeological characteristics as well. These studies include a detailed geological reconnaissance, hydrogeochemical analyses and a geoelectrical characterization. The main goal is to assess the aquifer geometry and to identify the gypsum horizons causing the presence of higher concentrations of sulphates in drinking water. A total of 26 audiomagnetotelluric soundings were measured and modelled along profiles following a perpendicular direction to the NW regional trending. Two-dimensional resistivity models suggest the presence of a shallow conductive layer (C1) with resistivity values ranging from 10 to 20 Ohm.m. It is related to the upper aquifer with a very low exploitation potential. A less conductive horizon (C2; 50 Ohm.m) underlying the shallow aquifer could be related to a very fractured limestone horizon forming a confined aquifer in the middle of the valley. A very resistive layer (R1) is observed underlying C1 and C2 units. This strata shows higher resistivity values (>100 Ohm.m) and could be associated with a reefal limestone identified as El Abra Formation. Finally, a conductive layer (<100 Ohm.m) observed beneath this horizon could be related to the oldest stratigraphic unit outcropping on the region, the Guaxcamá Formation, a gypsum-enriched unit, that contributes to the presence of sulphates in the upper aquifers by dissolution processes.

Gypsum crystals in the inner shelf sediments off Maharashtra, India

Digital Repository Service at National Institute of Oceanography (India)

Hashimi, N.H.; Ambre, N.V.

Gypsum crystals have been found in the inner shelf silty clay/clayey silt off the Maharashtra Coast between Vengurla and Bombay. Generally these occur as euhedral single or twinned crystals of selenite. Very often shells are found embedded within...

7 CFR 1260.108 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1260.108 Section 1260.108 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Promotion and Research Order Definitions § 1260.108 United States. United States means the 50 States and the...

7 CFR 1221.32 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1221.32 Section 1221.32 Agriculture... INFORMATION ORDER Sorghum Promotion, Research, and Information Order Definitions § 1221.32 United States. United States or U.S. means collectively the 50 States, the District of Columbia, the Commonwealth of...

7 CFR 1216.30 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1216.30 Section 1216.30 Agriculture... INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.30 United States. United States means collectively the 50 states, the District of Columbia, the Commonwealth of Puerto Rico...

7 CFR 1218.22 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1218.22 Section 1218.22 Agriculture... INFORMATION ORDER Blueberry Promotion, Research, and Information Order Definitions § 1218.22 United States. United States means collectively the 50 states, the District of Columbia, the Commonwealth of Puerto Rico...

Mineral potential of clays that cover the gypsum deposits in Araripina-PE region

International Nuclear Information System (INIS)

Lira, B.B.; Anjos, I.F. dos; Rego, S.A.B.C.

2011-01-01

In the present work the applicability of the clays that cover the deposits of Gypsum Plaster in the region of Araripina - PE for use as the ceramic pigments and for bricks production in the red ceramic industry was analyzed. The clay minerals contained the illite, kaolinite and smectite, with high proportion of the last one. The possibility of industrial application of this mineral clay is considerable; however, the mining industries that mine and process the gypsum in the region do not take the clays into account as the potential mineral. In general, industries use the clay minerals in manufacturing processes or as key raw materials, or as the alternatives for some kinds of the chemical processing industries. This paper aims to highlight the potential of materials that cover the deposits of gypsum in reference. The material sampled from different deposit layers was characterized and the physical treatment of ore was applied. The results showed that the material analyzed can be used in various kinds of industry, such as the production of natural ceramic pigments. (author)

In Situ Observation of Gypsum-Anhydrite Transition at High Pressure and High Temperature

International Nuclear Information System (INIS)

Liu Chuan-Jiang; Zheng Hai-Fei

2012-01-01

An in-situ Raman spectroscopic study of gypsum-anhydrite transition under a saturated water condition at high pressure and high temperature is performed using a hydrothermal diamond anvil cell (HDAC). The experimental results show that gypsum dissolvs in water at ambient temperature and above 496 MPa. With increasing temperature, the anhydrite (CaSO 4 ) phase precipitates at 250–320°C in the pressure range of 1.0–1.5GPa, indicating that under a saturated water condition, both stable conditions of pressure and temperature and high levels of Ca and SO 4 ion concentrations in aqueous solution are essential for the formation of anhydrite. A linear relationship between the pressure and temperature for the precipitation of anhydrite is established as P(GPa) = 0.0068T−0.7126 (250°C≤T≤320°C). Anhydrite remained stable during rapid cooling of the sample chamber, showing that the gypsum-anhydrite transition involving both dissolution and precipitation processes is irreversible at high pressure and high temperature. (geophysics, astronomy, and astrophysics)

Development of a self-compacting gypsum-based lightweight composite

NARCIS (Netherlands)

Yu, Q.; Brouwers, H.J.H.

2012-01-01

This article addresses experiments and theories of a self-compacting gypsum-based lightweight composite (SGLC). A ß-hemihydrate is used as binder and lightweight aggregate (LWA, 0–2 mm in different size ranges) is used as aggregate into this composite. The mix of the new composite is designed based

7 CFR 1210.315 - United States.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States. 1210.315 Section 1210.315 Agriculture... PLAN Watermelon Research and Promotion Plan Definitions § 1210.315 United States. United States means each of the several States and the District of Columbia. [60 FR 10797, Feb. 28, 1995] National...

Process for fabrication of dry flue gas gypsum. Verfahren zur Herstellung von trockenem Rauchgasgips

Energy Technology Data Exchange (ETDEWEB)

Wirsching, F.; Hueller, R.; Limmer, B.

1984-06-20

According to the invention gypsum from flue gas wet desulfurization is dried without loss of crystallization water by a 1-4% sidestream of the flue gas in a suspended bed dryer and is subsequently separated in a cyclone. The sidestream is removed after the electrostatic precipitator, where the gas temperature is 100-130 degrees, and returned to the main gas stream prior to desulfurization, thus preventing the dehydration of the gypsum and eliminating the energy costs of reheating the gas stream to prevent acid condensation.

Gypsum plasterboards enhanced with phase change materials: A fire safety assessment using experimental and computational techniques

Directory of Open Access Journals (Sweden)

Kolaitis Dionysios I.

2013-11-01

Full Text Available Phase Change Materials (PCM can be used for thermal energy storage, aiming to enhance building energy efficiency. Recently, gypsum plasterboards with incorporated paraffin-based PCM blends have become commercially available. In the high temperature environment developed during a fire, the paraffins, which exhibit relatively low boiling points, may evaporate and, escaping through the gypsum plasterboard's porous structure, emerge to the fire region, where they may ignite, thus adversely affecting the fire resistance characteristics of the building. Aiming to assess the fire safety behaviour of such building materials, an extensive experimental and computational analysis is performed. The fire behaviour and the main thermo-physical physical properties of PCM-enhanced gypsum plasterboards are investigated, using a variety of standard tests and devices (Scanning Electron Microscopy, Thermo Gravimetric Analysis, Cone Calorimeter. The obtained results are used to develop a dedicated numerical model, which is implemented in a CFD code. CFD simulations are validated using measurements obtained in a cone calorimeter. In addition, the CFD code is used to simulate an ISO 9705 room exposed to fire conditions, demonstrating that PCM addition may indeed adversely affect the fire safety of a gypsum plasterboard clad building.

Uptake and speciation of uranium in synthetic gypsum (CaSO4•2H2O): Applications to radioactive mine tailings.

Science.gov (United States)

Lin, Jinru; Sun, Wei; Desmarais, Jacques; Chen, Ning; Feng, Renfei; Zhang, Patrick; Li, Dien; Lieu, Arthur; Tse, John S; Pan, Yuanming

2018-01-01

Phosphogypsum formed from the production of phosphoric acid represents by far the biggest accumulation of gypsum-rich wastes in the world and commonly contains elevated radionuclides, including uranium, as well as other heavy metals and metalloids. Therefore, billions-of-tons of phosphogypsum stockpiled worldwide not only possess serious environmental problems but also represent a potential uranium resource. Gypsum is also a major solid constituent in many other types of radioactive mine tailings, which stems from the common usage of sulfuric acid in extraction processes. Therefore, management and remediation of radioactive mine tailings as well as future beneficiation of uranium from phosphogysum all require detailed knowledge about the nature and behavior of uranium in gypsum. However, little is known about the uptake mechanism or speciation of uranium in gypsum. In this study, synthesis experiments suggest an apparent pH control on the uptake of uranium in gypsum at ambient conditions: increase in U from 16 μg/g at pH = 6.5 to 339 μg/g at pH = 9.5. Uranium L 3 -edge synchrotron X-ray absorption spectroscopic analyses of synthetic gypsum show that uranyl (UO 2 ) 2+ at the Ca site is the dominant species. The EXAFS fitting results also indicate that uranyl in synthetic gypsum occurs most likely as carbonate complexes and yields an average U-O distance ∼0.25 Å shorter than the average Ca-O distance, signifying a marked local structural distortion. Applications to phosphogypsum from the New Wales phosphoric acid plant (Florida, USA) and uranium mine tailings from the Key Lake mill (Saskatchewan, Canada) show that gypsum is an important carrier of uranium over a wide range of pH and controls the fate of this radionuclide in mine tailings. Also, development of new technologies for recovering U from phosphogypsum in the future must consider lattice-bound uranyl in gypsum. Copyright © 2017 Elsevier Ltd. All rights reserved.

Fate of gypsum-sulphur applied to soybean on Typic haplustepts

International Nuclear Information System (INIS)

Saharan, Neelam; Rattan, R.K.

2004-01-01

Field experiments were conducted on the sulphur-deficient Typic Haplustepts of the IARI farm for two consecutive, kharif seasons viz. 1996 and 1997 with soybean cultivar Pusa 22 as the crop. Varying rates of S as gypsum were basally applied in the main plots adjacent to the micro plots (1 m x 1 m) to quantify the partitioning of the fertilizer-sulphur taken up by soybean and its distribution in the soil profile. Soybean responded to the application of sulphur, with increase in yield being obtained up to rate of 40 kg S ha -1 . Data computed on distribution of the S derived from labelled gypsum and percent S utilization by the soybean crop increased from 13.23 and 4.15 to 23.41 and 6.39, respectively. During 1996, the per cent utilization of labelled S ranged from 5.6 to 8.8. Monitoring of added sulphur in the soil profile up to a depth of 1 m revealed maximum accumulation of the added S in 30-60 cm soil layer. With the help of 35 S around 11 to 18 per cent of the added S was traced in 60-100 cm soil layer. It can be concluded from the data for two years that during kharif season the application of S through water soluble sources like ammonium sulphate and ammonium phosphate sulphate should be avoided because even S from the sparingly soluble gypsum migrated to a depth of 1 m during the cropping season. (author)

Corrosion of bare and galvanized steel in gypsum

Directory of Open Access Journals (Sweden)

Gómez, Mercedes

1988-12-01

Full Text Available Gypsum is a relatively low-cost building material much abounding in our country. When it is put in contact with steel, it may produce high corrosion rates due to its pH value (close to 7. This work reports the results obtained in studying the corrosion rates of bare and galvanized steel in contact with gypsum and plaster, as well as the influence curing thermal treatment applied to gypsum, enviromental relative humidity and addition of compounds with different natures and purposes may have in such process. In-situ observations, as well as the measurement of the Polarization Resistance and the weight loss have been used as measurement technics. From the results obtained it has been possible to deduce that galvanized steel has better behaviour in dry enviroments than bare steel in the same conditions and moist atmosphere induces proportionally more corrosion in galvanized steel than in bare one. Additions to gypsum do not modified these conclusions, though it may be pointed out that addition of nitrites or lime improves the behaviour of bare steel, while galvanized behaviour is not modified. The addition of lime is not recommended because phenomena of dilated along time expansion may take place.

El yeso es un material de construcción de relativo bajo coste y que, además, es muy abundante en nuestro país. Debido a su pH cercano a la neutralidad, cuando entra en contacto con el acero, este puede corroerse a elevadas velocidades. En esta comunicación se presentan los resultados de un estudio sobre la velocidad de corrosión del acero desnudo y galvanizado en contacto con yeso y escayola y la influencia que tienen: el tratamiento térmico del curado del yeso, la humedad relativa ambiental y la adición de aditivos de diversa naturaleza y finalidad. Como técnicas de medida se han utilizado la medida de la Resistencia de Polarización y de la pérdida de peso, así como observaciones visuales. De los resultados se puede deducir que en

Mechanical properties of simulated Mars materials: gypsum-rich sandstones and lapilli tuff

Science.gov (United States)

Morrow, Carolyn; Lockner, David; Okubo, Chris

2013-01-01

Observations by the Mars Exploration Rover (MER) Opportunity, and other recent studies on diagenesis in the extensive equatorial layered deposits on Mars, suggest that the likely lithologies of these deposits are gypsum-rich sandstones and tuffaceous sediments (for example, Murchie and others, 2009; Squyres and others, 2012; Zimbelman and Scheidt, 2012). Of particular interest is how the diagenesis history of these sediments (degree of cementation and composition) influences the strength and brittle behavior of the material. For instance, fractures are more common in lower porosity materials under strain, whereas deformation bands, characterized by distributed strain throughout a broader discontinuity in a material, are common in higher porosity sedimentary materials. Such discontinuities can either enhance or restrict fluid flow; hence, failure mode plays an important role in determining the mechanics of fluid migration through sediments (Antonellini and Aydin, 1994; 1995; Taylor and Pollard, 2000; Ogilvie and Glover, 2001). As part of a larger study to characterize processes of fault-controlled fluid flow in volcaniclastic and gypsum-rich sediments on Mars, we have completed a series of laboratory experiments to focus on how gypsum clast content and degree of authigenic cementation affects the strength behavior of simulated Mars rocks. Both axial deformation and hydrostatic pressure tests were done at room temperature under dry conditions.

High Levels of Antibiotic Resistance but No Antibiotic Production Detected Along a Gypsum Gradient in Great Onyx Cave, KY, USA

Directory of Open Access Journals (Sweden)

Kathleen Lavoie

2017-09-01

Full Text Available A preliminary study of antibiotic production and antibiotic resistance was conducted in Great Onyx Cave in Mammoth Cave National Park, KY, to determine if gypsum (CaSO4∙2H2O affects these bacterial activities. The cave crosses through the width of Flint Ridge, and passages under the sandstone caprock are dry with different amounts of gypsum. The Great Kentucky Desert hypothesis posits that gypsum limits the distribution of invertebrates in the central areas of Great Onyx Cave. Twenty-four bacterial isolates were cultivated from swabs and soils. Using three methods (soil crumb, soil crumb with indicator bacteria, and the cross-streak method using isolated bacteria we did not detect any production of antibiotics. Antibiotic resistance was widespread, with all 24 isolates resistant to a minimum of two antibiotics of seven tested, with three isolates resistant to all. Antibiotic resistance was high and not correlated with depth into the cave or the amount of gypsum. The Great Kentucky Desert hypothesis of the negative effects of gypsum seems to have no impact on bacterial activity.

Toll Facilities in the United States - Toll Facilities in the United States

Data.gov (United States)

Department of Transportation — Biennial report containing selected information on toll facilities in the United States that has been provided to FHWA by the States and/or various toll authorities...

Analyzing the rules of fracture and damage, and the characteristics of the acoustic emission signal of a gypsum specimen under uniaxial loading

Science.gov (United States)

Chen, Dong; Wang, En-yuan; Li, Nan

2017-08-01

In order to study the mechanism of rock bursts in a mined-out area of a gypsum mine, in this paper acoustic emission testing of the uniaxial compression of gypsum and sandstone samples is carried out. The case of rupture of the specimen is observed, and the load axial deformation curve and acoustic emission parameters are obtained for the whole process of specimen rupture. The similarities and differences between the gypsum and sandstone samples are determined in terms of their mechanical properties, their damage evolution laws and frequency band energy distributions, and the instantaneous energy characteristics of their acoustic emission. The results show that the main fracture morphology of gypsum is ‘eight’-type, and the macroscopic fracture morphology of sandstone is mainly of partial ‘Y’-type and inverted Y-type. The intensity and uniformity of the gypsum and sandstone of the medium are different; because the gypsum is more uniform, it does not show as much variation as sandstone, instead suddenly increasing and decreasing. The maximum value of the damage variable D of gypsum reached 1, but the maximum value of D of the sandstone only reached 0.9. The frequency band of the maximum energy of gypsum and sandstone gradually decreased across the the four stages of rupture, while the maximum energy percentage increased gradually. From the stage where damage gradually increases to the stage of integral fracture of the specimen, the instantaneous energy showed a certain degree of increase. With an increase in the strength of the sample, the maximum energy percentage of the two materials corresponding to each phase gradually increases, and from the stage where damage gradually increases to the stage of integral fracture of the specimen, the value of instantaneous energy obviously increases. The results indicate that gypsum mines will also experience rock bursts, as coal mines do, but the intensity will be different. Therefore, using the three indicators, the

Oil Vulnerabilities and United States Strategy

Science.gov (United States)

2007-02-08

Mazda, Mercedes - Benz , Ford, Mercury, and Nissan offer flexible fuel vehicles in the United States. Ethanol is currently produced in the United States...USAWC STRATEGY RESEARCH PROJECT OIL VULNERABILITIES AND UNITED STATES STRATEGY by Colonel Shawn P. Walsh...Colleges and Schools, 3624 Market Street, Philadelphia, PA 19104, (215) 662-5606. The Commission on Higher Education is an institutional accrediting

Radiological properties of a wax-gypsum compensator material

International Nuclear Information System (INIS)

Plessis, F.C.P. du; Willemse, C.A.

2005-01-01

In this paper the radiological properties of a compensator material consisting of wax and gypsum is presented. Effective attenuation coefficients (EACs) have been determined from transmission measurements with an ion chamber in a Perspex phantom. Measurements were made at 80 and 100 cm source-to-skin distance (SSD) for beam energies of 6, 8, and 15 MV, for field sizes ranging from narrow beam geometries up to 40x40 cm 2 , and at measurement depths of maximum dose build-up, 5 and 10 cm. A parametrization equation could be constructed to predict the EAC values within 4% uncertainty as a function of field size and depth of measurement. The EAC dependence on off-axis position was also quantified at each beam energy and SSD. It was found that the compensator material reduced the required thickness for compensation by 26% at 8 MV when compared to pure paraffin wax for a 10x10 cm 2 field. Relative surface ionization (RSI) measurements have been made to quantify the effect of scattered electrons from the wax-gypsum compensator. Results indicated that for 80 cm SSD the RSI would exceed 50% for fields larger than 15x15 cm 2 . At 100 cm SSD the RSI values were below 50% for all field sizes used

31 CFR 596.313 - United States person.

Science.gov (United States)

2010-07-01

... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM LIST GOVERNMENTS SANCTIONS REGULATIONS General Definitions § 596.313 United States person. The term United States person means any United States...

Nuclear development in the United States

International Nuclear Information System (INIS)

Brewer, S.

1983-01-01

The history of the nuclear development in the United States has been one of international cooperation relations so far. The United States is to offer the technical information on atomic energy utilization to foreign countries in exchange for the guarantee that they never attempt to have or develop nuclear weapons. Actually, the United States has supplied the technologies on nuclear fuel cycle and other related fields to enable other countries to achieve economical and social progress. The Department of Energy clarified the public promise of the United States regarding the idea of international energy community. The ratio of nuclear power generation to total electric power supply in the United States exceeded 12%, and will exceed 20% by 1990. Since 1978, new nuclear power station has not been ordered, and some of the contracted power stations were canceled. The atomic energy industry in the United States prospered at the beginning of 1970s, but lost the spirit now, mainly due to the institutional problems rather than the technical ones. As the policy of the government to eliminate the obstacles, the improvement of the procedure for the permission and approval, the establishment of waste disposal capability, the verification of fast breeder reactor technology and the promotion of commercial fuel reprocessing were proposed. The re-establishment of the United States as the reliable supplier of atomic energy service is the final aim. (Kako, I.)

78 FR 70274 - United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism...

Science.gov (United States)

2013-11-25

... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism Advisory Board AGENCY: International Trade... the schedule and agenda for an open meeting of the United States Travel and Tourism Advisory Board...

78 FR 3398 - United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism...

Science.gov (United States)

2013-01-16

... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism Advisory Board AGENCY: International Trade... the schedule and agenda for an open meeting of the United States Travel and Tourism Advisory Board...

United States housing, 2012

Science.gov (United States)

Delton Alderman

2013-01-01

Provides current and historical information on housing market in the United States. Information includes trends for housing permits and starts, housing completions for single and multifamily units, and sales and construction. This report will be updated annually.

Dehydration reactions of gypsum: A neutron and X-ray diffraction study

Science.gov (United States)

Abriel, W.; Reisdorf, K.; Pannetier, J.

1990-03-01

The kinetics of the dehydration of gypsum was investigated by powder diffraction methods. Using the incoherent scattering effect of H with the neutron beam, the background intensity as a measure of the water content was checked in the temperature range 295-623 K. The superposed Bragg peaks yielded four major phases: Gypsum, subhydratesCaSO 4(H 2O) x (1 > x > 0),AIII-CaSO 4, AII-CaSO 4. For the subhydrates a maximum water content of x > = 0.74was determined. A different kinetic was found using Guinier X-ray technique with the heated sample prepared on a thin foil. Only with high local H 2O steam pressure, produced in the comparable larger sample container of the neutron diffraction experiment, could this high H 2O occupation of the subhydrate tunnel structure be found. A topotactic mechanism can describe the phase transitions for this reaction.

31 CFR 500.520 - Payments from accounts of United States citizens in employ of United States in foreign countries...

Science.gov (United States)

2010-07-01

... States citizens in employ of United States in foreign countries and certain other persons. 500.520..., Authorizations and Statements of Licensing Policy § 500.520 Payments from accounts of United States citizens in employ of United States in foreign countries and certain other persons. (a) Banking institutions within...

31 CFR 515.520 - Payments from accounts of United States citizens in employ of United States in foreign countries...

Science.gov (United States)

2010-07-01

... States citizens in employ of United States in foreign countries and certain other persons. 515.520..., Authorizations, and Statements of Licensing Policy § 515.520 Payments from accounts of United States citizens in employ of United States in foreign countries and certain other persons. (a) Banking institutions within...

TRAINING OF THE STATE PRESIDENT'S UNIT

African Journals Online (AJOL)

The primary function of the State President's Unit is to protect the head of state - not his person as is generally believed, but his authority over the state. Ironically, the ceremonial performances of the State President's Unit lead people to believe that they are only capable of doing drill exer- cises. However, upon investigating.

occurrence and geochemistry of nafada gypsum, north-eastern nigeria

African Journals Online (AJOL)

DJFLEX

2010-03-18

Mar 18, 2010 ... The container was placed in a. “HERZOG” palletizing machine for 10 seconds after which a pellet was produced. The procedure was repeated for each gypsum sample. Each pellet was analyzed for SiO2, Al2O3, CaO, MgO, SO3, K2O, Na2O,. MgCO3, combine water and purity, using X-ray spectrometer.

Fabrication and properties of microencapsulated-paraffin/gypsum-matrix building materials for thermal energy storage

International Nuclear Information System (INIS)

Su Junfeng; Wang Xinyu; Wang Shengbao; Zhao Yunhui; Huang Zhen

2012-01-01

Graphical abstract: DSC curves of microPCMs/gypsum composite samples before and after a thermal cycling treatment. Highlights: ► Microcapsules containing paraffin was fabricated by in-situ polymerization. ► Methanol-modified melamine–formaldehyde (MMF) was used as shell material. ► MicroPCMs/gypsum-matrix building materials were applied for solar energy storage. ► The structure and thermal conductivity of composites had been investigated. - Abstract: Microencapsulated phase change materials (microPCMs) have been widely applied in solid matrix as thermal-storage or temperature-controlling functional composites. The aim of this work was to prepare and investigate the properties of microPCMs/gypsum-matrix building materials for thermal energy storage. MicroPCMs contain paraffin was fabricated by in situ polymerization using methanol-modified melamine–formaldehyde (MMF) as shell material. A series of microPCMs samples were prepared under emulsion stirring rates in range of 1000–3000 r min −1 with core/shell weight ratios of 3/1, 2/1, 1/1, 1/2 and 1/3, respectively. The shell of microPCMs was smooth and compact with global shape, its thickness was not greatly affected by the core/shell ratio and emulsion stirring rate. DSC tests showed that the shell of microPCMs did not influence the phase change behavior of pure paraffin. It was found from TGA analysis that microPCMs samples containing paraffin lost their weight at the temperature of nearly 250 °C, which indicated that the PCM had been protected by shell. More shell material in microPCMs could enhance the thermal stability and provide higher compact condition for core material. After a 100-times thermal cycling treatment, the microPCMs contain paraffin also nearly did not change the phase change behaviors of PCM. With the increasing of weight contents of microPCMs in gypsum board, the thermal conductivity (λ) values of composites had decreased. The simulation of temperature tests proved that the

The impact of gypsum mine water: A case study on morphology and DNA integrity in the freshwater invertebrate, Gammarus balcanicus

International Nuclear Information System (INIS)

Ternjej, Ivančica; Mihaljević, Zlatko; Ivković, Marija; Previšić, Ana; Stanković, Igor; Maldini, Krešimir; Želježić, Davor; Kopjar, Nevenka

2014-01-01

The aim of our study was to investigate how exposure to heavy metal-rich waters from gypsum mining affects the morphology and levels of primary DNA damage in Gammarus balcanicus. Chemical analysis revealed increased concentrations of metals in water and sediment collected at a site impacted by gypsum mine wastewaters. The specimens also showed elevated total tissue metal levels when compared with the organisms collected at the reference site. The most prominent increase was observed for strontium, followed by iron, nickel, vanadium, aluminium, and manganese. The major pathway of entry for these toxic substances was through the degraded exoskeleton as a consequence of excessive strontium input (unbalanced calcium/strontium ratio) and altered permeability. Disturbed exoskeleton integrity was observed only in individuals collected downstream of the gypsum mine, which was confirmed by electron microscopy. Levels of primary DNA damage were evaluated using the alkaline comet assay in the haemolymph of the specimens. - Highlights: • Our findings suggest toxic potential of gypsum mine wastewaters. • The Gammarus specimens showed elevated total tissue metal levels. • Strontium uptake disturbed exoskeleton integrity. • Corrupted cuticle altered permeability to other toxic substances. • Combined effects of all contaminants caused genotoxicity. - Gypsum mine wastewaters have genotoxic potential and affect the gammarid exoskeleton morphology and biochemistry associated with a high strontium uptake

Contaminants from Cretaceous Black Shale Part 1: Natural weathering processes controlling contaminant cycling in Mancos Shale, southwestern United States, with emphasis on salinity and selenium

Science.gov (United States)

Tuttle, Michele L.W.; Fahy, Juli W.; Elliott, John G.; Grauch, Richard I.; Stillings, Lisa L.

2013-01-01

Soils derived from black shale can accumulate high concentrations of elements of environmental concern, especially in regions with semiarid to arid climates. One such region is the Colorado River basin in the southwestern United States where contaminants pose a threat to agriculture, municipal water supplies, endangered aquatic species, and water-quality commitments to Mexico. Exposures of Cretaceous Mancos Shale (MS) in the upper basin are a major contributor of salinity and selenium in the Colorado River. Here, we examine the roles of geology, climate, and alluviation on contaminant cycling (emphasis on salinity and Se) during weathering of MS in a Colorado River tributary watershed. Stage I (incipient weathering) began perhaps as long ago as 20 ka when lowering of groundwater resulted in oxidation of pyrite and organic matter. This process formed gypsum and soluble organic matter that persist in the unsaturated, weathered shale today. Enrichment of Se observed in laterally persistent ferric oxide layers likely is due to selenite adsorption onto the oxides that formed during fluctuating redox conditions at the water table. Stage II weathering (pedogenesis) is marked by a significant decrease in bulk density and increase in porosity as shale disaggregates to soil. Rainfall dissolves calcite and thenardite (Na2SO4) at the surface, infiltrates to about 1 m, and precipitates gypsum during evaporation. Gypsum formation (estimated 390 kg m−2) enriches soil moisture in Na and residual SO4. Transpiration of this moisture to the surface or exposure of subsurface soil (slumping) produces more thenardite. Most Se remains in the soil as selenite adsorbed to ferric oxides, however, some oxidizes to selenate and, during wetter conditions is transported with soil moisture to depths below 3 m. Coupled with little rainfall, relatively insoluble gypsum, and the translocation of soluble Se downward, MS landscapes will be a significant nonpoint source of salinity and Se to the

Reforestation and landscape reconstruction in gypsum mine area from the semiarid region of NE Brazil

Science.gov (United States)

Bittar, S. M. B.; Straaten, P. V.; de Araujo Vieura Santos, M. de Fatima; Agra Bezerra da Silva, Y. J.; da Silva, M.; Saraiva de Melo Pinheiro, T.; Gusmao Didier de Moraes, F.; de Aguiar Accioly, A. M.; Alves de Santana, S. R.; dos Santos, H. A.; de Carvalho, D. M.; de Lima Ferreira, G.; de Carvalho Santos, C.

2012-04-01

In the Araripe region, Northeast Brazil, exist the world's second largest reserve of gypsum, estimated at over than one billion tons, which accounts for 95% of the Brazilian production and constitutes an important segment of the regional economy. The gypsum deposit occurs in the Lower Cretaceous Santana Formation of the Araripe basin, which is constituted by siltstones, marls, limestones, shales and gypsum layers. The ore extraction is from an open pit, on simple benches with a height of about 15 meters. Activities in mining operations involve stripping, drilling, loading explosives, blast, fragmentation and block loading / transport. Currently, gypsum mining and processing results in major changes in the landscape (pits and wastes heaps sedimentary rocks and soil mixture), deforestation of the "caatinga" ecosystem for use as firewood in small calcinations, dust pollution and changes in hydrology. To promote environmental remediation of this area, a multidisciplinary research has being done with the aim to support reforestation at the wastes heaps. The study involved the following activities: collection and physical, chemical and mineralogical characterization of mine waste materials; a floristic survey around the mines (botanical identification and measuring physical parameters in 16 plots, in order to identify which species are best suited to the conditions of the substrate at the mine site); an experiment (randomized block design) developed in a greenhouse, where seedlings of various native tree species were grown in a "constructed soil" made up of gypsum waste combined with chicken, goat and cattle manure, aimed to select tree species and soil treatment to be used in a waste heap; and an assessment of water quality for irrigation of the reforestation areas. The waste materials consist of large clayey aggregates, which may present physical/chemical properties unfavorable for plant development. The mineralogy of the sand fraction (> 85% quartz, gypsum and

Coal Combustion Residual Beneficial Use Evaluation: Fly Ash Concrete and FGD Gypsum Wallboard

Science.gov (United States)

This page contains documents related to the evaluation of coal combustion residual beneficial use of fly ash concrete and FGD gypsum wallboard including the evaluation itself and the accompanying appendices

Theoretical and Numerical Investigation of the Cavity Evolution in Gypsum Rock

Science.gov (United States)

Li, Wei; Einstein, Herbert H.

2017-11-01

When water flows through a preexisting cylindrical tube in gypsum rock, the nonuniform dissolution alters the tube into an enlarged tapered tube. A 2-D analytical model is developed to study the transport-controlled dissolution in an enlarged tapered tube, with explicit consideration of the tapered geometry and induced radial flow. The analytical model shows that the Graetz solution can be extended to model dissolution in the tapered tube. An alternative form of the governing equations is proposed to take advantage of the invariant quantities in the Graetz solution to facilitate modeling cavity evolution in gypsum rock. A 2-D finite volume model was developed to validate the extended Graetz solution. The time evolution of the transport-controlled and the reaction-controlled dissolution models for a single tube with time-invariant flow rate are compared. This comparison shows that for time-invariant flow rate, the reaction-controlled dissolution model produces a positive feedback between the tube enlargement and dissolution, while the transport-controlled dissolution does not.

Lime and gypsum to improve root depth of orange crop in an Ultisol of the Coastal Tablelands Calcário e gesso no aprofundamento radicular da laranjeira em um Argissolo dos Tabuleiros Costeiros

Directory of Open Access Journals (Sweden)

Lafayette F. Sobral

2009-12-01

Full Text Available Coastal Tableland is a landscape unit in the North East of Brazil in which the main soils are Ultisols. In these soils, a compacted layer denominated "cohesive horizon" occurs and root growth is limited by it. An experiment with five treatments and six replications was set up in order to study how liming and gypsum could improve root depth of orange (Citrus sinensis L. Osbeck crop in an Ultisol in which a compacted layer was found at 0.3 m. Treatments were: A - No liming and no gypsum; B - Liming to achieve 60% base saturation; C - B + 1 t of gypsum ha-1 ; D - B + 2 t of gypsum ha-1 and E - B + 3 t of gypsum ha-1. Gypsum increased calcium and sulfate in the cohesive horizon. Surface application of lime and gypsum did not cause changes in soil density and total porosity in the cohesive horizon. An improvement of root length was observed at the cohesive horizon.Os tabuleiros costeiros são uma unidade de paisagem em que um dos principais solos são os Argissolos, nos quais, uma camada compactada, denominada "horizonte coeso" ocorre e o crescimento radicular é por ela limitado. Um experimento com cinco tratamentos e seis repetições foi implantado para se estudar os efeitos da calagem e do gesso no aprofundamento radicular da laranjeira (Citrus sinensis L. Osbeck em um Argissolo onde o horizonte coeso está a 0,3 m de profundidade. Os tratamentos foram: A - Sem gesso e sem calagem; B - Calagem para atingir 60% de saturação por bases; C - B + 1 t ha-1 de gesso ; D - B + 2 t ha-1 de gesso; e E - B + 3 t ha-1 de gesso. A calagem e o gesso aumentaram significativamente os teores de sulfato e de calcio no solo até a profundidade de 0,40 m. A aplicação a lanço de calcário e gesso não causaram modificações na densidade do solo e na porosidade total da camada compactada "horizonte coeso". Foi observado um aumento do comprimento das raízes da laranjeira na camada compactada.

31 CFR 515.334 - United States national.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States national. 515.334 Section 515.334 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... of the United States, and which has its principal place of business in the United States. [61 FR...

7 CFR 1212.32 - United States Customs Service.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States Customs Service. 1212.32 Section 1212... § 1212.32 United States Customs Service. “United States Customs Service” or “Customs” means the United States Customs and Border Protection, an agency of the Department of Homeland Security. Honey Packers and...

Determination of Ra-226 and Th-232 in samples of natural phosphates, industrial gypsums and surface soils by gamma spectrometry

International Nuclear Information System (INIS)

Pessenda, L.C.R.; Nascimento Filho, V.F. do; Nadai, E.A. de; Barros Ferraz, E.S. de; Sao Paulo Univ., Piracicaba

1988-01-01

The natural radioactivity in Ra-226 and Th-232 in samples of natural phosphates, industrial gypsums (phosphogypsums) and surface soils of different regions was measured by γ-ray spectrometry. The majority of phosphates and gypsums examined showed significantly higher values than soils, mainly in relation to Ra-226 activity. The activity ranges found for phosphates, gypsums and soils were: 79.1 - 3180 Bq/kg, 56.3 - 986.6 Bq/kg, 8.8 - 54.3 Bq/kg for Ra-226 and 33.6 - 1450.3 Bq/kg; 17.4 - 130,1 Bq/kg, 9.8 - 108.9 Bq/kg for Th-232, respectively. (author) [pt

High-yield synthesis of vaterite microparticles in gypsum suspension system via ultrasonic probe vibration/magnetic stirring

Science.gov (United States)

Wang, Bo; Pan, Zihe; Cheng, Huaigang; Chen, Zuliang; Cheng, Fangqin

2018-06-01

Vaterite-type calcium carbonate particles have some unique properties such as high hydrophilicity, large surface areas, and hierarchical structures consisting of primary vaterite particles in comparison with calcite or aragonite-type polymorphs. In this paper, gypsum (CaSO4·2H2O) suspension is used to synthesize micro-sized vaterite CaCO3 through magnetic stirring (MS) and ultrasonic probe vibration (UPV) methods. The effects of ammonia concentration, CO2 flow rate, solid-liquid ratio on the gypsum carbonation process, mineral phase composition, morphology and particle size distribution of CaCO3 are investigated. The results show that the carbonation process is significantly influenced by ammonia concentration, CO2 flow rate and ultrasound. Comparing with magnetic stirring, ultrasonic probe vibration take less time to reach the complete carbonate reaction. Gypsum is transformed to vaterite with the conversion rate about ∼95% when the mole ratio of NH4+/Ca2+ is 2.4 otherwise the carbonation reaction was uncompleted with gypsum residues left. Comparing with MS method, the UPV method resulted in smaller size and narrower size distribution of as-prepared microparticles and approximately 80% reduction of the particle size was achieved. It is established that increasing the solid-liquid ratio resulted in larger particle size in MS system and smaller particle size in UPV system. Increasing CO2 flow rate caused the particle size decreased in MS system and increased in UPV system.

Elementary characterization of samples of Portland cement, natural gypsum and phosphogypsum mortars from Brazil

Energy Technology Data Exchange (ETDEWEB)

Narloch, Danielle Cristine; Paschuk, Sergei Anatolyevich; Corrêa, Janine Nicolosi; Torres, Catarina Alzira Peddis; Mazer, Wellington; Macioski, Gustavo [Universidade Tecnologica Federal do Parana (UTFPR), PR (Brazil); Lara, Alessandro [Universidade de Sao Paulo (USP), SP (Brazil). Departamento de Fisica; Casali, Juliana Machado, E-mail: janine_nicolosi@hotmail.com, E-mail: alellara@hotmail.com, E-mail: jucasali@gmail.com [Instituto Federal de Santa Catarina (IFSC), Florianópolis, SC (Brazil)

2017-07-01

Portland cement, the basic ingredient of concrete and is manufactured by crushing, milling and proportioning limestone, sand, clay, iron ore and secondary materials such as shells, chalk or marl combined with shale slate or blast furnace slag, fly ash, gypsum, phosphogypsum, and some others. Evaluating the physical and mineralogical characteristics of the cement and its chemical composition is essential to establish the quality of the product. Therefore, the objective of this work was to characterize and quantify the most common chemical elements in the samples of Brazilian Portland cement, natural gypsum, and phosphogypsum mortars by means of X-ray dispersive energy spectroscopy (EDXRF), as well as to evaluate the strength of these mortars. For analysis of the compressive strength, initially prepared samples were submitted to a destructive mechanical test. Subsequently samples were milled and compacted to form thin tablets, which were submitted to the EDXRF analysis. The qualitative and quantitative analyzes showed that for phosphogypsum mortar the largest mass fractions were found of 49.8±2.5% (Si), 24.66±0.96% (S) and 22.10±0.42% (Ca). For gypsum mortar those values were found of 43.41±0.45% (Ca), 33.8 ± 0.8% (S) and 18.9±1.2% (Si), respectively; and for Portland cement mortar, the predominant elements in those samples have the mass fractions of 64.20±0.52% (Ca) and 27.3±1.5% (Si). The results showed that obtained values of mass fraction of the elements Si, S, K, Ca, Ti, Fe are in rather good agreement with quantities indicated for manufacture. Besides, gypsum and phosphogypsum presented almost the same composition and compressive strength. (author)

Elementary characterization of samples of Portland cement, natural gypsum and phosphogypsum mortars from Brazil

International Nuclear Information System (INIS)

Narloch, Danielle Cristine; Paschuk, Sergei Anatolyevich; Corrêa, Janine Nicolosi; Torres, Catarina Alzira Peddis; Mazer, Wellington; Macioski, Gustavo; Lara, Alessandro

2017-01-01

Portland cement, the basic ingredient of concrete and is manufactured by crushing, milling and proportioning limestone, sand, clay, iron ore and secondary materials such as shells, chalk or marl combined with shale slate or blast furnace slag, fly ash, gypsum, phosphogypsum, and some others. Evaluating the physical and mineralogical characteristics of the cement and its chemical composition is essential to establish the quality of the product. Therefore, the objective of this work was to characterize and quantify the most common chemical elements in the samples of Brazilian Portland cement, natural gypsum, and phosphogypsum mortars by means of X-ray dispersive energy spectroscopy (EDXRF), as well as to evaluate the strength of these mortars. For analysis of the compressive strength, initially prepared samples were submitted to a destructive mechanical test. Subsequently samples were milled and compacted to form thin tablets, which were submitted to the EDXRF analysis. The qualitative and quantitative analyzes showed that for phosphogypsum mortar the largest mass fractions were found of 49.8±2.5% (Si), 24.66±0.96% (S) and 22.10±0.42% (Ca). For gypsum mortar those values were found of 43.41±0.45% (Ca), 33.8 ± 0.8% (S) and 18.9±1.2% (Si), respectively; and for Portland cement mortar, the predominant elements in those samples have the mass fractions of 64.20±0.52% (Ca) and 27.3±1.5% (Si). The results showed that obtained values of mass fraction of the elements Si, S, K, Ca, Ti, Fe are in rather good agreement with quantities indicated for manufacture. Besides, gypsum and phosphogypsum presented almost the same composition and compressive strength. (author)

Bacterial communities and the nitrogen cycle in the gypsum soils of Cuatro Ciénegas Basin, coahuila: a Mars analogue.

Science.gov (United States)

López-Lozano, Nguyen E; Eguiarte, Luis E; Bonilla-Rosso, Germán; García-Oliva, Felipe; Martínez-Piedragil, Celeste; Rooks, Christine; Souza, Valeria

2012-07-01

The OMEGA/Mars Express hyperspectral imager identified gypsum at several sites on Mars in 2005. These minerals constitute a direct record of past aqueous activity and are important with regard to the search of extraterrestrial life. Gale Crater was chosen as Mars Science Laboratory Curiosity's landing site because it is rich in gypsum, as are some desert soils of the Cuatro Ciénegas Basin (CCB) (Chihuahuan Desert, Mexico). The gypsum of the CCB, which is overlain by minimal carbonate deposits, was the product of magmatic activity that occurred under the Tethys Sea. To examine this Mars analogue, we retrieved gypsum-rich soil samples from two contrasting sites with different humidity in the CCB. To characterize the site, we obtained nutrient data and analyzed the genes related to the N cycle (nifH, nirS, and nirK) and the bacterial community composition by using 16S rRNA clone libraries. As expected, the soil content for almost all measured forms of carbon, nitrogen, and phosphorus were higher at the more humid site than at the drier site. What was unexpected is the presence of a rich and divergent community at both sites, with higher taxonomic diversity at the humid site and almost no taxonomic overlap. Our results suggest that the gypsum-rich soils of the CCB host a unique microbial ecosystem that includes novel microbial assemblies.

Nuclear power in the United States

International Nuclear Information System (INIS)

Johnston, J.B.

1985-01-01

All over the world except in the United States, nuclear energy is a low cost, secure, environmentally acceptable form of energy. In the United States, civilian nuclear power is dead. 112 nuclear power plants have been abandoned or cancelled in the last decade, and there has been no new order for nuclear plants since 1978. It will be fortunate to have 125 operating nuclear plants in the United States in the year 2000. There are almost 90 completed nuclear power plants and about 45 under construction in the United States, but several of those under construction will eventually be abandoned. About 20 % of the electricity in the United States will be generated by nuclear plants in 2000 as compared with 13 % supplied in the last year. Under the present regulatory and institutional arrangement, American electric utilities would not consider to order a new nuclear power plant. Post-TMI nuclear plants became very expensive, and there is also ideological opposition to nuclear power. Coal-firing plants are also in the similar situation. The uncertainty about electric power demand, the cost of money, the inflation of construction cost and regulation caused the situation. (Kako, I.)

Populations of some molds in water-damaged homes may differ if the home was constructed with gypsum drywall compared to plaster

Science.gov (United States)

Starting in the 1940s, gypsum drywall began replacing plaster and lathe in the U.S. home construction industry. Our goal was to evaluate whether some mold populations differ in water- damaged homes primarily constructed with gypsum drywall compared to plaster. The dust samples fr...

Teen Pregnancy in the United States

Science.gov (United States)

... United States: the contribution of abstinence and improved contraceptive use. Am J Public Health. 2007;97(1):150-6. Lindberg LD, Santelli JS, Desai, S. Understanding the Decline in Adolescent Fertility in the United States, 2007–2012. J ...

Towards establishing a combined rate law of nucleation and crystal growth - The case study of gypsum precipitation

Science.gov (United States)

Rendel, Pedro M.; Gavrieli, Ittai; Wolff-Boenisch, Domenik; Ganor, Jiwchar

2018-03-01

The main obstacle in the formulation of a quantitative rate-model for mineral precipitation is the absence of a rigorous method for coupling nucleation and growth processes. In order to link both processes, we conducted a series of batch experiments in which gypsum nucleation was followed by crystal growth. Experiments were carried out using various stirring methods in several batch vessels made of different materials. In the experiments, the initial degree of supersaturation of the solution with respect to gypsum (Ωgyp) was set between 1.58 and 1.82. Under these conditions, heterogeneous nucleation is the dominant nucleation mode. Based on changes in SO42- concentration with time, the induction time of gypsum nucleation and the following rate of crystal growth were calculated for each experiment. The induction time (6-104 h) was found to be a function of the vessel material, while the rates of crystal growth, which varied over three orders of magnitude, were strongly affected by the stirring speed and its mode (i.e. rocking, shaking, magnetic stirrer, and magnetic impeller). The SO42- concentration data were then used to formulate a forward model that couples the simple rate laws for nucleation and crystal growth of gypsum into a single kinetic model. Accordingly, the obtained rate law is based on classical nucleation theory and heterogeneous crystal growth.

Immigration Enforcement Within the United States

Science.gov (United States)

2006-04-06

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Policy Issues...Remained in the United States, (Washington: Center for Immigration Studies, May 2002). Immigration Enforcement Within the United States Introduction ...interior enforcement lack a border component. For example, fugitive taskforces, investigations of alien slavery and sweatshops , and employer sanctions do

A low-temperature ductile shear zone: The gypsum-dominated western extension of the brittle Fella-Sava Fault, Southern Alps.

Science.gov (United States)

Bartel, Esther Maria; Neubauer, Franz; Heberer, Bianca; Genser, Johann

2014-12-01

Based on structural and fabric analyses at variable scales we investigate the evaporitic gypsum-dominated Comeglians-Paularo shear zone in the Southern Alps (Friuli). It represents the lateral western termination of the brittle Fella-Sava Fault. Missing dehydration products of gypsum and the lack of annealing indicate temperatures below 100 °C during development of the shear zone. Despite of such low temperatures the shear zone clearly exhibits mylonitic flow, thus evidencing laterally coeval activity of brittle and viscous deformation. The dominant structures within the gypsum rocks of the Lower Bellerophon Formation are a steeply to gently S-dipping foliation, a subhorizontal stretching lineation and pure shear-dominated porphyroclast systems. A subordinate simple shear component with dextral displacement is indicated by scattered σ-clasts. Both meso- and microscale structures are characteristic of a subsimple shear type of deformation with components of both coaxial and non-coaxial strain. Shortening in a transpressive regime was accommodated by right-lateral displacement and internal pure shear deformation within the Comeglians-Paularo shear zone. The shear zone shows evidence for a combination of two stretching faults, where stretching occurred in the rheologically weaker gypsum member and brittle behavior in enveloping lithologies.

United States advanced technologies

International Nuclear Information System (INIS)

Longenecker, J.R.

1985-01-01

In the United States, the advanced technologies have been applied to uranium enrichment as a means by which it can be assured that nuclear fuel cost will remain competitive in the future. The United States is strongly committed to the development of advanced enrichment technology, and has brought both advanced gas centrifuge (AGC) and atomic vapor laser isotope separation (AVLIS) programs to a point of significant technical refinement. The ability to deploy advanced technologies is the basis for the confidence in competitive future price. Unfortunately, the development of advanced technologies is capital intensive. The year 1985 is the key year for advanced technology development in the United States, since the decision on the primary enrichment technology for the future, AGC or AVLIS, will be made shortly. The background on the technology selection process, the highlights of AGC and AVLIS programs and the way to proceed after the process selection are described. The key objective is to maximize the sales volume and minimize the operating cost. This will help the utilities in other countries supply low cost energy on a reliable, long term basis. (Kako, I.)

The United States and the Arab Gulf Monarchies

International Nuclear Information System (INIS)

Kechichian, J.A.

1999-01-01

The United States has enduring strategic interests in the Persian Gulf region. To understand these interests and the Usa policy towards the Arab Gulf Monarchies, the french institute of international relations (IFRI) proposes this document. The following chapters are detailed: the United States and the Arab Gulf Monarchies, overview, Chief Unites States Objective: Access to oil, re-evaluating United States Foreign Policy in the Gulf, the second term (Usa strategy). (A.L.B.)

Evolution of microstructure and elastic wave velocities in dehydrated gypsum samples

Science.gov (United States)

Milsch, Harald; Priegnitz, Mike

2012-12-01

We report on changes in P and S-wave velocities and rock microstructure induced by devolatilization reactions using gypsum as a reference analog material. Cylindrical samples of natural alabaster were dehydrated in air, at ambient pressure, and temperatures between 378 and 423 K. Dehydration did not proceed homogeneously but via a reaction front moving sample inwards separating an outer highly porous rim from the remaining gypsum which, above approximately 393 (±5) K, concurrently decomposed into hemihydrate. Overall porosity was observed to continuously increase with reaction progress from approximately 2% for fully hydrated samples to 30% for completely dehydrated ones. Concurrently, P and S-wave velocities linearly decreased with porosity from 5.2 and 2.7 km/s to 1.0 and 0.7 km/s, respectively. It is concluded that a linearized empirical Raymer-type model extended by a critical porosity term and based on the respective time dependent mineral and pore volumes reasonably replicates the P and S-wave data in relation to reaction progress and porosity.

Composting and gypsum amendment of broiler litter to reduce nutrient leaching loss

Science.gov (United States)

Relative to fresh broiler litter, little is known about the dynamics of composted litter derived-nutrient in the ecosystem. In this study, the potential leaching losses of nutrients from compost relative to fresh broiler litter along with flue gas desulfurization (FGD gypsum), as a nutrient immobil...

Results using flue gas desulfurization gypsum in soilless substrates for greenhouse crops

Science.gov (United States)

Recent availability of Flue Gas Desulfurization gypsum (FGDG) has led to interested in its possible use in horticulture greenhouse production. Three studies were conducted to determine the effects of increasing rates of FGDG on six greenhouse crops. In the first study, substrates (6:1 pine bark:san...

Radioecology of and radiation dose from Dutch waste gypsum released into the environment

International Nuclear Information System (INIS)

Koster, H.W.; Weers, A.W. van; Netherlands Energy Research Foundation, Petten)

1985-11-01

The Dutch industries release 9 kinds of waste gypsum, 90% of the total quantity is phosphogypsum. Only waste gypsums from the phosphate industries show increased radioactivity, the strongest in phosphogypsum. All phosphogypsum, 2 Tg.a -1 , is disposed of into the Rhine at Rotterdam. This leads to an increase of radionuclides, from the U-238 chain, along the Dutch coast. The calculated increase of activity concentrations in sea food causes an increase of the individual radiation dose of maximal 150 μSv.a -1 and of the Dutch population dose of 170 manSv.a -1 . Stacking of the phosphogypsum would result in a dose increase of one order of magnitude lower. The need for environmental disposal or stacking of at least the fine and coarse fractions of the phosphogypsum, which are difficult to recycle, will remain. (Auth.)

A study of the effectiveness of the use of gypsum and volcanic ash against the stability of clay soil in terms of UCT and CBR values

Science.gov (United States)

Roesyanto; Iskandar, R.; Hastuty, IP; Lubis, AIU

2018-02-01

Soil stabilization is an effort to improve engineering properties of soil. The conventional soil stabilization is by adding additives to the soil such as Portland cement, lime, and bitumen. The clay stabilization research was done by adding gypsum and volcanic ash. The research purposes were to find out the value of engineering properties of clay due to the addition of 2% gypsum and 2% - 15% volcanic ash. The soil was classified as Clay - Low Plasticity (CL) based on USCS and was classified as A-7-6 (10) based on AASHTO classification system. The UCT values of original soil and original soil plus 2% gypsum were 1.40 kg/cm2 and 1.66 kg/cm2 respectively. The CBR soaked and unsoaked values of original soil were 4.44% and 6.28% correspondingly. Meanwhile, CBR soaked and CBR unsoaked values of original soil plus 2% gypsum were 6.74% and 8.02% respectively. The research results showed that the additives materials of gypsum and volcanic ash improved the engineering properties of clay. The UCT result from the stabilized soil by 2% gypsum and 10% volcanic ash gave value of 2.79 kg/cm2 (increased 99.28% from original soil). For CBR test, the most effective mixture were in variation of 2% gypsum and 9% volcanic ash which gave value of 9.07% (104.27% increase from original soil) for CBR soaked and 10.29% (63.85% increase from original soil) for CBR unsoaked. The stabilized soil with 2% gypsum and 9% volcanic ash was classified as CL based on USCS and was classified as A-6 (4) based on AASHTO classification system.

78 FR 46686 - Privacy Act of 1974; Treasury/United States Mint .013-United States Mint National Electronic...

Science.gov (United States)

2013-08-01

... available publicly. FOR FURTHER INFORMATION CONTACT: For general questions and privacy issues, please... DEPARTMENT OF THE TREASURY Privacy Act of 1974; Treasury/United States Mint .013--United States... Privacy Act of 1974, as amended, 5 U.S.C. 552a, the Department of the Treasury (``Treasury'') and the...

Palaeoclimatic significance of gypsum pseudomorphs in the inner shelf sediments off Machalipatnam bay

Digital Repository Service at National Institute of Oceanography (India)

Rao, V.P.

Pseudo-gypsum crystals have been found in the coarse fraction of the sediments from the inner continental shelf off Machilipatnam Bay. They range in size from 3 to 7 mm are elongate and lenticular in shape. Bassanite and calcite are pseudomorphs...

39 CFR 221.1 - The United States Postal Service.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false The United States Postal Service. 221.1 Section 221.1 Postal Service UNITED STATES POSTAL SERVICE ORGANIZATION AND ADMINISTRATION GENERAL ORGANIZATION § 221.1 The United States Postal Service. The United States Postal Service was established as an...

UNITED STATES DURING THE COLD WAR 1945-1990

Directory of Open Access Journals (Sweden)

Novita Mujiyati

2016-02-01

Full Text Available United States and the Soviet Union is a country on the part of allies who emerged as the winner during World War II. However, after reaching the Allied victory in the situation soon changed, man has become an opponent. United States and the Soviet Union are competing to expand the influence and power. To compete the United States strive continuously strengthen itself both in the economic and military by establishing a defense pact and aid agencies in the field of economy. During the Cold War the two are not fighting directly in one of the countries of the former Soviet Union and the United States. However, if understood, teradinya the Korean War and the Vietnam War is a result of tensions between the two countries and is a direct warfare conducted by the United States and the Soviet Union. Cold War ended in conflict with the collapse of the Soviet Union and the United States emerged as the winner of the country.

78 FR 27857 - United States Standards for Wheat

Science.gov (United States)

2013-05-13

... RIN 0580-AB12 United States Standards for Wheat AGENCY: Grain Inspection, Packers and Stockyards... (GIPSA) is revising the United States Standards for Wheat under the United States Grain Standards Act (USGSA) to change the definition of Contrasting classes (CCL) in the class Hard White wheat. This change...

Tuberculosis along the United States-Mexico border, 1993-2001.

Science.gov (United States)

Schneider, Eileen; Laserson, Kayla F; Wells, Charles D; Moore, Marisa

2004-07-01

Tuberculosis (TB) is a leading public health problem and a recognized priority for the federal Governments of both Mexico and the United States of America. The objectives of this research, primarily for the four states in the United States that are along the border with Mexico, were to: (1) describe the epidemiological situation of TB, (2) identify TB risk factors, and (3) discuss tuberculosis program strategies. We analyzed tuberculosis case reports collected from 1993 through 2001 by the tuberculosis surveillance system of the United States. We used those data to compare TB cases mainly among three groups: (1) Mexican-born persons in the four United States border states (Arizona, California, New Mexico, and Texas), (2) persons in those four border states who had been born in the United States, and (3) Mexican-born persons in the 46 other states of the United States, which do not border Mexico. For the period from 1993 through 2001, of the 16 223 TB cases reported for Mexican-born persons in the United States, 12 450 of them (76.7%) were reported by Arizona, California, New Mexico, and Texas. In those four border states overall in 2001, tuberculosis case rates for Mexican-born persons were 5.0 times as high as the rates for persons born in the United States; those four states have 23 counties that directly border on Mexico, and the ratio in those counties was 5.8. HIV seropositivity, drug and alcohol use, unemployment, and incarceration were significantly less likely to be reported in Mexican-born TB patients from the four border states and the nonborder states than in patients born in the United States from the four border states (P pulmonary tuberculosis patients who were 18-64 years of age and residing in the four border states, the Mexican-born patients were 3.6 times as likely as the United States-born patients were to have resistance to at least isoniazid and rifampin (i. e., to have multidrug-resistant TB) and twice as likely to have isoniazid resistance

Global Entrepreneurship and the United States

Science.gov (United States)

2010-09-01

Global Entrepreneurship and the United States by Zoltan J. Acs Laszlo Szerb Ruxton, MD 21204 for under contract number SBAHQ-09...SUBTITLE Global Entrepreneurship and the United States 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...3 2.1. Assessing Entrepreneurship ..................................................................................4 2.2. Stages of Development

75 FR 25925 - United States Mint

Science.gov (United States)

2010-05-10

... Committee May 25, 2010 Public Meeting. SUMMARY: Pursuant to United States Code, Title 31, section 5135(b)(8... scheduled for May 25, 2010. Date: May 25, 2010. Time: 9 a.m. to 12 p.m. Location: 8th Floor Board Room, United States Mint, 801 9th Street, NW., Washington, DC 20220. Subject: Review and discuss obverse and...

Composition of gypsum from the Koběřice quarry (Czech Republic)

Czech Academy of Sciences Publication Activity Database

Konečný, Pavel; Plevová, Eva; Vaculíková, Lenka; Kožušníková, Alena; Peterková, J.; Hundáková, M.

2011-01-01

Roč. 8, č. 2 (2011), s. 145-156 ISSN 1214-9705 Institutional research plan: CEZ:AV0Z30860518 Keywords : gypsum * Kobeřice quarry * spectroscopy Subject RIV: DB - Geology ; Mineralogy Impact factor: 0.530, year: 2011 http://www.irsm.cas.cz/abstracts/AGG/02_11/5_Konecny.pdf

31 CFR 515.330 - Person within the United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Person within the United States. 515... Definitions § 515.330 Person within the United States. (a) The term person within the United States, includes: (1) Any person, wheresoever located, who is a resident of the United States; (2) Any person actually...

45 CFR 212.7 - Repayment to the United States.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Repayment to the United States. 212.7 Section 212... UNITED STATES CITIZENS RETURNED FROM FOREIGN COUNTRIES § 212.7 Repayment to the United States. (a) An..., any or all of the cost of such assistance to the United States, except insofar as it is determined...

20 CFR 416.215 - You leave the United States.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false You leave the United States. 416.215 Section... Eligible § 416.215 You leave the United States. You lose your eligibility for SSI benefits for any month during all of which you are outside of the United States. If you are outside of the United States for 30...

37 CFR 1.412 - The United States Receiving Office.

Science.gov (United States)

2010-07-01

... Information § 1.412 The United States Receiving Office. (a) The United States Patent and Trademark Office is a Receiving Office only for applicants who are residents or nationals of the United States of America. (b) The... “United States Receiving Office” or by the abbreviation “RO/US.” (c) The major functions of the Receiving...

The United States and the Kurds: Case Studies in United States Engagement

National Research Council Canada - National Science Library

Lambert, Peter

1997-01-01

..., between 1969- 1975, and 1990-1996. Both eras saw the United States able to influence events relating to the Kurds in support of a larger regional policy, only to find no easy solution to the Kurdish quest for autonomy...

Influence of the gypsum dehydration temperature and alkali additives on the properties of anhydrite cement

Directory of Open Access Journals (Sweden)

Leskeviciene V.

2010-01-01

Full Text Available While dehydrating gypsum with additives at the temperatures of 800°C and 900°C the influence of alkali additives on both the crystalline structure of anhydrite and properties of anhydrite binder was investigated. The industrial and household wastes including other lowcost materials were used as additives. Having heated them with gypsum the anhydrite with alkali activation properties was obtained. The properties of such substances were evaluated using the methods of chemical, diffractive X-ray scanning and scanning electron microscopy (SEM analyses. Some additives, e.g. 5 % ground glass waste, were found to increase crystal agglomerate formation of anhydrite binder, accelerate the hydration process of anhydrite and double the compressive strength of hydrated samples compared to samples without additives.

United States rejoin ITER

International Nuclear Information System (INIS)

Roberts, M.

2003-01-01

Upon pressure from the United States Congress, the US Department of Energy had to withdraw from further American participation in the ITER Engineering Design Activities after the end of its commitment to the EDA in July 1998. In the years since that time, changes have taken place in both the ITER activity and the US fusion community's position on burning plasma physics. Reflecting the interest in the United States in pursuing burning plasma physics, the DOE's Office of Science commissioned three studies as part of its examination of the option of entering the Negotiations on the Agreement on the Establishment of the International Fusion Energy Organization for the Joint Implementation of the ITER Project. These were a National Academy Review Panel Report supporting the burning plasma mission; a Fusion Energy Sciences Advisory Committee (FESAC) report confirming the role of ITER in achieving fusion power production, and The Lehman Review of the ITER project costing and project management processes (for the latter one, see ITER CTA Newsletter, no. 15, December 2002). All three studies have endorsed the US return to the ITER activities. This historical decision was announced by DOE Secretary Abraham during his remarks to employees of the Department's Princeton Plasma Physics Laboratory. The United States will be working with the other Participants in the ITER Negotiations on the Agreement and is preparing to participate in the ITA

United States Stateplane Zones - NAD83

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — U.S. State Plane Zones (NAD 1983) represents the State Plane Coordinate System (SPCS) Zones for the 1983 North American Datum within United States.

United States Stateplane Zones - NAD27

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — U.S. State Plane Zones (NAD 1927) represents the State Plane Coordinate System (SPCS) Zones for the 1927 North American Datum within United States.

Gypsum (CaSO42H2O) scaling on polybenzimidazole and cellulose acetate hollow fiber membranes under forward osmosis

KAUST Repository

Chen, Si Cong

2013-11-08

We have examined the gypsum (CaSO42H2O) scaling phenomena on membranes with different physicochemical properties in forward osmosis (FO) processes. Three hollow fiber membranes made of (1) cellulose acetate (CA), (2) polybenzimidazole (PBI)/polyethersulfone (PES) and (3) PBI-polyhedral oligomeric silsesquioxane (POSS)/polyacrylonitrile (PAN) were studied. For the first time in FO processes, we have found that surface ionic interactions dominate gypsum scaling on the membrane surface. A 70% flux reduction was observed on negatively charged CA and PBI membrane surfaces, due to strong attractive forces. The PBI membrane surface also showed a slightly positive charge at a low pH value of 3 and exhibited a 30% flux reduction. The atomic force microscopy (AFM) force measurements confirmed a strong repulsive force between gypsum and PBI at a pH value of 3. The newly developed PBI-POSS/PAN membrane had ridge morphology and a contact angle of 51.42 14.85 after the addition of hydrophilic POSS nanoparticles and 3 min thermal treatment at 95 C. Minimal scaling and an only 1.3% flux reduction were observed at a pH value of 3. Such a ridge structure may reduce scaling by not providing a locally flat surface to the crystallite at a pH value of 3; thus, gypsum would be easily washed away from the surface. 2013 by the authors; licensee MDPI, Basel, Switzerland.

Present state of electric power business in United States and Europe

International Nuclear Information System (INIS)

Onishi, Kenichi

2011-01-01

This article reported present state of nuclear power and electric power business in United States and Europe after Fukushima Daiichi Accident. As for the trend of demand and supply of electric power and policy, the accident forced Germany possibly to proceed with phase-out of nuclear power, but France and United States to sustain nuclear power with no great change of energy policy at this moment. As for the trend of electric power market, there was not state in United States with liberalized retail market of electric power after rolling blackouts occurred in California State in the early 2000s. In Germany proceeding with renewable energy introduction, renewable electricity fed into the grid was paid for by the network operators at fixed tariffs and the costs passed on to electricity consumers were increasing. Renewable Portfolio Standards (RPS) in United States forced the state to introduction of renewable energy to some ratio, and Feed-in Tariff (FIT) introduced in EU in 1990s lead to introduction of a large amount of renewable electricity targeted in 2020. Huge amount of wind power introduction brought about several problems to solve such that excess electric power above domestic demand had bad effects on grids in neighboring region. Enforcement of power transmission lines was also needed with increase of maximum electric power as well as introduction of a large amount of renewable electricity. (T. Tanaka)

Death in the United States, 2011

Science.gov (United States)

... Order from the National Technical Information Service NCHS Death in the United States, 2011 Recommend on Facebook ... 2011 SOURCE: National Vital Statistics System, Mortality. Do death rates vary by state? States experience different mortality ...

The production of hydroxyapatite prototypes from solid bodies of Gypsum/Polyvinyl Alcohol composites

Energy Technology Data Exchange (ETDEWEB)

Barbosa, Amanda Alves; Ferraz, Andrea de Vasconcelos; Dantas, Alan Christie; Olivier, Nelson Cardenas, E-mail: andrea.ferraz@univasf.edu.br [Universidade Federal do Vale do Sao Francisco (UNIVASF), Juazeiro, BA (Brazil)

2014-08-15

Prototypes of porous hydroxyapatite (HAp) were produced from Gypsum/PVA composite, using a mass proportion of 15% polymer. The material was obtained by means of chemical conversion in (NH{sub 4}){sub 2}HPO{sub 4} 0.5 mol.L{sup -1} solution and NH{sub 4}OH 6.0 mol.L{sup -1} alkaline medium for pH control, maintained between 6.0 and 9.0. The reaction occurred at a temperature of 100°C at different test times. The obtained HAp was characterized by several techniques, such as FTIR, which identified the SO{sub 4}{sup 2-} groups characteristic for the Gypsum block, and the PO{sub 4}{sup 2-} groups that are attributed to the biomaterial HAp, besides XRD and SEM, which made it possible to confirm a successful conversion of the material. Tests for mechanical resistance to compression (σ{sub c}) were carried out for both materials as well. (author)

31 CFR 103.39 - Person outside the United States.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Person outside the United States. 103... Person outside the United States. For the purposes of this subpart, a remittance or transfer of funds, or... the United States, shall be deemed to be a remittance or transfer to a person outside the United...

Energy problems of the United States

International Nuclear Information System (INIS)

Pertuzio, A.

2006-01-01

The united states are the third world producer of oil which accounts for 440% of world production and 20 million barrels/day of which 60% are imported. That dependence on imports is likely to increase in the next decades. Such supplies and their security are therefore a fundamental factor of the United States foreign policy in combination with their political, economic and strategic objectives in a world both unsure and dangerous

Household pesticide usage in the United States.

Science.gov (United States)

Savage, E P; Keefe, T J; Wheeler, H W; Mounce, L; Helwic, L; Applehans, F; Goes, E; Goes, T; Mihlan, G; Rench, J; Taylor, D K

1981-01-01

A total of 10,000 U.S. households in 25 standard metropolitan statistical areas and 25 counties were included in the United States. More than 8,200 households granted an interview. Nine of every ten households in the United States used some types of pesticide in their house, garden, or yard. Households in the southeastern United States used the most pesticides. Although more than 500 different pesticide formulations were used by the sampled households, 15 pesticides accounted for 65.5% of all pesticides reported in this study. Thirteen of these 15 pesticides were insecticides, one was a herbicide, and one was a rodenticide.

75 FR 13345 - Pricing for Certain United States Mint Products

Science.gov (United States)

2010-03-19

... DEPARTMENT OF THE TREASURY United States Mint Pricing for Certain United States Mint Products AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of First Spouse Bronze Medals and 2010 First Spouse Bronze Medal Series: Four...

22 CFR 22.3 - Remittances in the United States.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Remittances in the United States. 22.3 Section...-DEPARTMENT OF STATE AND FOREIGN SERVICE § 22.3 Remittances in the United States. (a) Type of remittance. Remittances shall be in the form of: (1) Check or bank draft drawn on a bank in the United States; (2) money...

Factors affecting the precipitation of pure calcium carbonate during the direct aqueous carbonation of flue gas desulfurization gypsum

International Nuclear Information System (INIS)

Song, Kyungsun; Jang, Young-Nam; Kim, Wonbaek; Lee, Myung Gyu; Shin, Dongbok; Bang, Jun-Hwan; Jeon, Chi Wan; Chae, Soo Chun

2014-01-01

The mineral carbonation of FGD (flue gas desulfurization) gypsum was carried out through CO 2 sorption into ammonia solution containing FGD gypsum. High-purity calcium carbonate was precipitated from DCC (dissolved calcium carbonate) solution which was extracted during the induction period. The factors affecting the preparation of pure calcium carbonate were examined under the following conditions: CO 2 flow rate (1–3 L/min), ammonia content (4–12%), and S/L (solid-to-liquid) ratio (5–300 g/L). X-Ray diffraction study revealed that the PCC (precipitated calcium carbonate) was round-shaped vaterite. The induction time for PCC decreased as the CO 2 flow rate increased. The maximum formation efficiency for pure PCC was seen to increase linearly with the ammonia content. The formation efficiency for pure PCC was the highest (90%) for S/L ratio of 5 g/L but it decreased as S/L ratio increased. On the other hand, S/L ratio didn't affect the maximum solubility limit of DCC. It is believed that the pure PCC would add an economic value to the FGD gypsum carbonation for industrial CO 2 sequestration. - Highlights: • Pure and white CaCO 3 was synthesized using induction period during direct carbonation of FGD gypsum. • Its formation efficiency was increased with ammonia content but decreased with solid-to-liquid ratio. • This method is expected to extend to other industrial CO 2 sequestration for the enhanced economic value of precipitated CaCO 3

Incorporation of gypsum waste in ceramic block production: Proposal for a minimal battery of tests to evaluate technical and environmental viability of this recycling process.

Science.gov (United States)

Godinho-Castro, Alcione P; Testolin, Renan C; Janke, Leandro; Corrêa, Albertina X R; Radetski, Claudemir M

2012-01-01

Civil engineering-related construction and demolition debris is an important source of waste disposed of in municipal solid waste landfills. After clay materials, gypsum waste is the second largest contributor to the residential construction waste stream. As demand for sustainable building practices grows, interest in recovering gypsum waste from construction and demolition debris is increasing, but there is a lack of standardized tests to evaluate the technical and environmental viability of this solid waste recycling process. By recycling gypsum waste, natural deposits of gypsum might be conserved and high amounts of the waste by-product could be reused in the civil construction industry. In this context, this paper investigates a physical property (i.e., resistance to axial compression), the chemical composition and the ecotoxicological potential of ceramic blocks constructed with different proportions of clay, cement and gypsum waste, and assesses the feasibility of using a minimal battery of tests to evaluate the viability of this recycling process. Consideration of the results for the resistance to axial compression tests together with production costs revealed that the best formulation was 35% of plastic clay, 35% of non-plastic clay, 10% of Portland cement and 20% of gypsum waste, which showed a mean resistance of 4.64MPa. Energy dispersive X-ray spectrometry showed calcium and sulfur to be the main elements, while quartz, gypsum, ettringite and nacrite were the main crystalline compounds found in this formulation. Ecotoxicity tests showed that leachate from this formulation is weakly toxic toward daphnids and bacteria (EC(20%)=69.0 and 75.0, respectively), while for algae and fish the leachate samples were not toxic at the EC(50%) level. Overall, these results show that the addition of 20% of gypsum waste to the ceramic blocks could provide a viable substitute for clay in the ceramics industry and the tests applied in this study proved to be a useful tool

Crystallisation of Gypsum and Prevention of Foaming in Wet Flue Gas Desulphurisation (FGD) Plants

DEFF Research Database (Denmark)

Hansen, Brian Brun

The aim of this project is to investigate two operational problems, which have been experienced during wet flue gas desulphurisation (FGD) operation, i.e. poor gypsum dewatering properties and foaming. The results of this work can be used for the optimization of wet FGD-plants in terms of reliabi......The aim of this project is to investigate two operational problems, which have been experienced during wet flue gas desulphurisation (FGD) operation, i.e. poor gypsum dewatering properties and foaming. The results of this work can be used for the optimization of wet FGD-plants in terms....... Experiments in a falling film wet FGD pilot plant have shown a strong non-linear behaviour (in a ln(n(l)) vs. l plot) at the lower end of the particle size range, compared to the well-known linear “mixed suspension mixed product removal (MSMPR)” model. A transient population balance model, fitted...

The United Kingdom: Issues for the United States

National Research Council Canada - National Science Library

Archick, Kristin

2007-01-01

...; and more recently, from the UK's strong support in countering terrorism and confronting Iraq. The United States and Britain also share a mutually beneficial trade and economic relationship, and are each other's biggest foreign direct investors...

Radiation therapy facilities in the United States

International Nuclear Information System (INIS)

Ballas, Leslie K.; Elkin, Elena B.; Schrag, Deborah; Minsky, Bruce D.; Bach, Peter B.

2006-01-01

Purpose: About half of all cancer patients in the United States receive radiation therapy as a part of their cancer treatment. Little is known, however, about the facilities that currently deliver external beam radiation. Our goal was to construct a comprehensive database of all radiation therapy facilities in the United States that can be used for future health services research in radiation oncology. Methods and Materials: From each state's health department we obtained a list of all facilities that have a linear accelerator or provide radiation therapy. We merged these state lists with information from the American Hospital Association (AHA), as well as 2 organizations that audit the accuracy of radiation machines: the Radiologic Physics Center (RPC) and Radiation Dosimetry Services (RDS). The comprehensive database included all unique facilities listed in 1 or more of the 4 sources. Results: We identified 2,246 radiation therapy facilities operating in the United States as of 2004-2005. Of these, 448 (20%) facilities were identified through state health department records alone and were not listed in any other data source. Conclusions: Determining the location of the 2,246 radiation facilities in the United States is a first step in providing important information to radiation oncologists and policymakers concerned with access to radiation therapy services, the distribution of health care resources, and the quality of cancer care

75 FR 13345 - Pricing for Certain 2010 United States Mint Products

Science.gov (United States)

2010-03-19

... DEPARTMENT OF THE TREASURY United States Mint Pricing for Certain 2010 United States Mint Products AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of the 2010 United States Mint Presidential $1 Coin and First Spouse Medal...

Intergenerational educational mobility in Denmark and the United States

DEFF Research Database (Denmark)

Andrade, Stefan Bastholm; Thomsen, Jens-Peter

2018-01-01

An overall finding in comparative mobility studies is that intergenerational mobility is greater in Scandinavia than in liberal welfare-state countries like the United States and United Kingdom. However, in a recent study, Landersø and Heckman (L & H) (2017) argue that intergenerational educational...... mobility in Denmark and the United States is remarkably similar. L & H’s findings run contrary to widespread beliefs and have been echoed in academia and mass media on both sides of the Atlantic Ocean. In this article, we reanalyze educational mobility in Denmark and the United States using the same data...... sources as L & H. We apply several different methodological approaches from economics and sociology, and we consistently find that educational mobility is higher in Denmark than in the United States....

Toll Facilities in the United States

Data.gov (United States)

Department of Transportation — Biennial report containing selected information on toll facilities in the United States that has been provided to FHWA by the States and/or various toll authorities...

State nuclear initiatives in the United States

International Nuclear Information System (INIS)

Strauss, P.L.; Stoiber, C.R.

1977-01-01

The paper deals with State nuclear initiatives regarding the role of nuclear power in the energy future of the United States. The question of whether and under what circumstances nuclear facilities should be used to generate electricity was put to the popular vote in several States in 1976. Some general principles of Federal-State relations are discussed with specific reference to nuclear regulations. The initiative mechanism itself is described as well as its legal form and background. The parallel developments in the State and Federal legislative consideration of nuclear issues is reviewed and the suggested reasons for the defeat of the proposals in the seven States concerned are discussed. Finally, the author draws some conclusions on the effects of the 1976 initiatives on future decision-making in the US on energy policy in general and nuclear power in particular. (NEA) [fr

27 CFR 479.89 - Transfers to the United States.

Science.gov (United States)

2010-04-01

... Transfers to the United States. A firearm may be transferred to the United States or any department... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Transfers to the United States. 479.89 Section 479.89 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO...

Flue gas desulfurization gypsum: Its effectiveness as an alternative bedding material for broiler production

Science.gov (United States)

Flue gas desulfurization gypsum (FGDG) may be a viable low-cost alternative bedding material for broiler production. In order to evaluate FGD gypsum’s viability, three consecutive trials were conducted to determine its influence on live performance (body weight, feed consumption, feed efficiency, an...

Determination of boron content and isotopic composition in gypsum by inductively coupled plasma optical emission spectroscopy and positive thermal ionization mass spectrometry using phase transformation.

Science.gov (United States)

Ma, Yun-Qi; Peng, Zhang-Kuang; Yang, Jian; Xiao, Ying-Kai; Zhang, Yan-Ling

2017-12-01

As a stable isotope, boron plays an important role in hydrogeology, environmental geochemistry, ore deposit geochemistry and marine paleoclimatology. However, there is no report of boron isotopic composition in gypsum. This is mainly confined to complete dissolution of Gypsum by water or acid. In this study, gypsum was converted to calcium carbonate (CaCO 3 ) with ammonium bicarbonate(NH 4 HCO 3 ) by two steps at 50°C. In every step, the mass ratio of NH 4 HCO 3 /CaSO 4 ·2H 2 O was twice, and conversion rate reached more than 98%. Converted CaCO 3 was totally dissolved with hydrochloric acid (the dissolution rate was over 99%). In order to overcome the difficulties of the matrix interference and the detection limit of Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), we use Amberlite IRA 743 resin to purify and enrichment the boron at first, then eluting boron from the resin with 10mL 0.1mol/L hydrochloric acid at 75°C. The boron isotopic composition of natural gypsum samples was determined using positive thermal ionization mass spectrometry (P-TIMS). The boron isotopic composition of gypsum may be an excellent indicator for the formation environment. Copyright © 2017 Elsevier B.V. All rights reserved.

32 CFR 516.54 - Witnesses for the United States.

Science.gov (United States)

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Witnesses for the United States. 516.54 Section..., Travel, and Expenses of Witnesses § 516.54 Witnesses for the United States. (a) Status of witness. A military member authorized to appear as a witness for the United States, including those authorized to...

32 CFR 150.21 - Appeals by the United States.

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Appeals by the United States. 150.21 Section 150... the United States. (a) Restricted filing. Only a representative of the government designated by the Judge Advocate General of the respective service may file an appeal by the United States under Article...

United States housing, first quarter 2013

Science.gov (United States)

Delton Alderman

2014-01-01

Provides current and historical information on housing market in the United States. Information includes trends for housing permits and starts, housing under construction, and housing completions for single and multifamily units, and sales and construction. This report will be updated regularly.

Synthesis of Fluorite (CaF2 Crystal from Gypsum Waste of Phosphoric Acid Factory in Silica Gel

Directory of Open Access Journals (Sweden)

Mohammad Misbah Khunur

2012-06-01

Full Text Available This paper report the synthesis and characterization of fluorite single crystal prepared from gypsum waste of phosphoric acid production in silica gel. Instead of its high calcium, gypsum was used to recycle the waste which was massively produces in the phosphoric acid production. The gypsum waste, the raw material of CaCl2 supernatant, was dissolved in concentrated HCl and then precipitated as calcium oxalate (CaC2O4 by addition of ammonium oxalate. The CaCl2 was obtained by dissolving the CaC2O4 with HCl 3M. The crystals were grown at room temperature in silica gel and characterized by AAS, FTIR and powder XRD. The optimum crystal growth condition, which is pH of gel, CaCl2 concentration and growth time, were investigated. The result shows that at optimum condition of pH 5.80, CaCl2 concentrations of 1.2 M, and growth time of 144 hours, colorless crystals with the longest size of 3 mm, were obtained (72.57%. Characterization of the synthesized crystal by AAS indicates that the obtained crystal has high purity. Meanwhile, analysis by FTIR spectra shows a Ca–F peak at 775 cm-1, and powder-XRD analysis confirms that the obtained crystal was fluorite (CaF2. © 2012 BCREC UNDIP. All rights reservedReceived: 11st April 2012; Revised: 4th June 2012; Accepted: 13rd June 2012[How to Cite: M.M. Khunur, A. Risdianto, S. Mutrofin, Y.P. Prananto. (2012. Synthesis of Fluorite (CaF2 Crystal from Gypsum Waste of Phosphoric Acid Factory in Silica Gel. Bulletin of Chemical Reaction Engineering & Catalysis, 7 (1: 71-77.  doi:10.9767/bcrec.7.1.3171.71-77 ][How to Link / DOI: http://dx.doi.org/10.9767/bcrec.7.1.3171.71-77 ] | View in 

Developing biodiversity indicators on a stakeholders' opinions basis: the gypsum industry Key Performance Indicators framework.

Science.gov (United States)

Pitz, Carline; Mahy, Grégory; Vermeulen, Cédric; Marlet, Christine; Séleck, Maxime

2016-07-01

This study aims to establish a common Key Performance Indicators (KPIs) framework for reporting about the gypsum industry biodiversity at the European level. In order to integrate different opinions and to reach a consensus framework, an original participatory process approach has been developed among different stakeholder groups: Eurogypsum, European and regional authorities, university scientists, consulting offices, European and regional associations for the conservation of nature, and the extractive industry. The strategy is developed around four main steps: (1) building of a maximum set of indicators to be submitted to stakeholders based on the literature (Focus Group method); (2) evaluating the consensus about indicators through a policy Delphi survey aiming at the prioritization of indicator classes using the Analytic Hierarchy Process method (AHP) and of individual indicators; (3) testing acceptability and feasibility through analysis of Environmental Impact Assessments (EIAs) and visits to three European quarries; (4) Eurogypsum final decision and communication. The resulting framework contains a set of 11 indicators considered the most suitable for all the stakeholders. Our KPIs respond to European legislation and strategies for biodiversity. The framework aims at improving sustainability in quarries and at helping to manage biodiversity as well as to allow the creation of coherent reporting systems. The final goal is to allow for the definition of the actual biodiversity status of gypsum quarries and allow for enhancing it. The framework is adaptable to the local context of each gypsum quarry.

Clay stabilization by using gypsum and paddy husk ash with reference to UCT and CBR value

Science.gov (United States)

Roesyanto; Iskandar, R.; Hastuty, I. P.; Dianty, W. O.

2018-02-01

Clays that have low shear strength need to be stabilized in order to meet the technical requirements to serve as a subgrade material. One of the usual soil stabilization methods is by adding chemicals such as Portland cement, lime, and bitumen. The clay stabilization research was done by adding gypsum and paddy husk ash. The research goals were to find out the value of engineering properties of clay due to the addition of 2% gypsum and 2% - 15% paddy husk ash. The soil was classified as Clay - Low Plasticity (CL) based on USCS and was classified as A-7-6 (10) based on AASHTO classification system. The UCT value of original soil was 1.41 kg/cm2. While the CBR soaked and unsoaked values of original soil were 4.41% and 6.23% respectively. The research results showed the addition of paddy husk ash decreased the value of unconfined compressive strength as well as CBR. The stabilized soil by 2% gypsum and 0% paddy husk ash gave maximum UCT value of 1.67 kg/cm2, while the maximum value of CBR were found 6.71% for CBR soaked and 8.00% for CBR unsoaked. The addition of paddy husk ash did not alter the soil classification according to AASHTO or USCS, even degrade the engineering properties of original soil.

Arsenic in Ground Water of the United States

Science.gov (United States)

... Team More Information Arsenic in groundwater of the United States Arsenic in groundwater is largely the result of ... Gronberg (2011) for updated arsenic map. Featured publications United States Effects of human-induced alteration of groundwater flow ...

Potential of Soil Amendments (Biochar and Gypsum in increasing Water Use Efficiency of Abelmoschus esculentus L. Moench

Directory of Open Access Journals (Sweden)

Aniqa eBatool

2015-09-01

Full Text Available Water being an essential component for plant growth and development, its scarcity poses serious threat to crops around the world. Climate changes and global warming are increasing the temperature of earth hence becoming an ultimate cause of water scarcity. It is need of the day to use potential soil amendments that could increase the plants’ resistance under such situations. Biochar and gypsum were used in the present study to improve the water use efficiency and growth of Abelmoschus esculentus L. Moench (Lady’s Finger. A six weeks experiment was conducted under greenhouse conditions. Stress treatments were applied after thirty days of sowing. Plant height, leaf area, photosynthesis, transpiration rate, stomatal conductance and water use efficiency were determined weekly under stressed (60% field capacity and non-stressed (100% field capacity conditions. Stomatal conductance and transpiration rate decreased and reached near to zero in stressed plants. Stressed plants also showed resistance to water stress upto five weeks and gradually perished at sixth week. On the other hand, water use efficiency improved in stressed plants containing biochar and gypsum as compared to untreated plants. Biochar alone is a better strategy to promote plant growth and WUE specifically of Abelmoschus esculentus, compared to its application in combination with gypsum.

Enrichment situation outside the United States

International Nuclear Information System (INIS)

Anon.

1979-01-01

Different enrichment technologies are briefly characterized which include gaseous diffusion, which is presently the production mainstay of the United States and France; the gaseous centrifuge which is the production plant for Urenco and the technology for future United States enrichment expansion; the aero-dynamic processes which include the jet nozzle (also known as the Becker process) and the fixed-wall centrifuge (also known as the Helikon process); chemical processes; laser isotope separation processes (also referred to in the literature as LIS); and plasma technology

Technical Note: Historic gypsum-kilns (Morata de Tajuña, Madrid

Directory of Open Access Journals (Sweden)

Llamas Borrajo, J. F.

2007-08-01

Full Text Available In the locality of Morata de Tajuña and surroundings there was an important settlement of gypsum pits and limekilns, together with other historical industries, now disappear. These activities were developed mainly during the 1960´s and 70´s, but its production decreased because of changes in the productive processes (substitution of discontinuous processes by continuous ones, higher kilns, etc. (1. Nevertheless, some of these furnaces still remain, as well as ancient workers who have provided important information. Within the research project funded by the Madrid´s Government, entitled: Industrial archaeology: Conservation of the mining and metallurgical heritage of Madrid (IV, ancient gypsum pits have been identified and inventoried. The ancient gypsiferous extraction history was recovered and the productive processes fluxes were reconstructed. The state of the heritage is evaluated and the conservation of some of the elements is recommended. Likewise, the intangible heritage was also investigated, being able to show a legend related with these kilns.En Morata de Tajuña y pueblos limítrofes hay una importante tradición yesera y calera, así como de otras industrias de materiales de la construcción ya desaparecidas, sobre todo en los años 60-70 del pasado siglo, debido a cambios en los sistemas productivos (paso de sistemas discontinuos a continuos, hornos mayores, etc. (1. Por eso aún se conservan algunos hornos y también viven antiguos productores, a los que hemos podido preguntar sobre los procesos productivos. En el marco de un proyecto de investigación de la Consejería de Educación de la Comunidad de Madrid titulado “Arqueología Industrial: conservación del patrimonio minero-metalúrgico madrileño (IV” se están identificando e inventariando viejas yeserías, recuperando la historia yesera local, reconstruyendo los flujos productivos y entrevistando a antiguos operarios. De esta manera, se pretende evaluar

Microbial Volatile Organic Compound Emissions from Stachybotrys chartarum growing on Gypsum Wallboard and Ceiling tile

Science.gov (United States)

This study compared seven toxigenic strains of S. chartarum found in water-damaged buildings to characterize the microbial volatile organic compound (MVOC) emissions profile while growing on gypsum wallboard (W) and ceiling tile (C) coupons. The inoculated coupons with their sub...

Leading Causes of Death in Females United States

Science.gov (United States)

... and Health Issues at Work Health Equity Leading Causes of Death in Females, United States Recommend on Facebook Tweet ... to current and previous listings for the leading causes of death in females in the United States. Please note ...

33 CFR 2.38 - Waters subject to the jurisdiction of the United States; waters over which the United States has...

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Waters subject to the jurisdiction of the United States; waters over which the United States has jurisdiction. 2.38 Section 2.38 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL JURISDICTION...

A Scanning Transmission X-ray Microscopy Study of Cubic and Orthorhombic C3A and Their Hydration Products in the Presence of Gypsum

Directory of Open Access Journals (Sweden)

Vanessa Rheinheimer

2016-08-01

Full Text Available This paper shows the microstructural differences and phase characterization of pure phases and hydrated products of the cubic and orthorhombic (Na-doped polymorphs of tricalcium aluminate (C3A, which are commonly found in traditional Portland cements. Pure, anhydrous samples were characterized using scanning transmission X-ray microscopy (STXM, X-ray photoelectron spectroscopy (XPS and X-ray diffraction (XRD and demonstrated differences in the chemical and mineralogical composition as well as the morphology on a micro/nano-scale. C3A/gypsum blends with mass ratios of 0.2 and 1.9 were hydrated using a water/C3A ratio of 1.2, and the products obtained after three days were assessed using STXM. The hydration process and subsequent formation of calcium sulfate in the C3A/gypsum systems were identified through the changes in the LIII edge fine structure for Calcium. The results also show greater Ca LII binding energies between hydrated samples with different gypsum contents. Conversely, the hydrated samples from the cubic and orthorhombic C3A at the same amount of gypsum exhibited strong morphological differences but similar chemical environments.

Unites States and the oil of the Middle-East

International Nuclear Information System (INIS)

Noel, P.

2005-08-01

The author discusses different aspects of the United States intervention and behavior in the Middle-East petroleum management. The Iraq and Iran potentials are largely under used. The Saudi Arabia defines its own oil policy, but benefits of the Unites States military help. The United States intervention is in the domain of the security of flux on the world market. (A.L.B.)

Determination of Radium 226 in mexican phosphate fertilizers and gypsum by gamma spectrometry.; Determinacion de Radio 226 en fertilizantes fosfatados y en yeso mediante espectrometria gamma.

Energy Technology Data Exchange (ETDEWEB)

Godinez A, M C

1996-12-31

The {sup 226} Ra isotope was determined in 17, 20 and 46% m/m phosphate fertilizers and gypsum. The samples of the fertilizers were dissolved in 10% v/v nitric acid solutions. The barium sulphate method was used for the precipitation of {sup 226} Ra. On the other hand, alkaline fusion method was used to separate the {sup 226} Ra from gypsum. The results indicated that {sup 226} Ra was present in the phosphate fertilizers and gypsum. The {sup 226} Ra concentrations present in these materials were between 10 {sup -4} - 10 {sup -5} {mu}g g{sup -1}. (Author).

Production development and utilization of Zimmer Station wet FGD by-products. Final report. Volume 5, A laboratory greenhouse study conducted in fulfillment of Phase 2, Objective 2 titled. Use of FGD by-product gypsum enriched with magnesium hydroxide as a soil amendment

Energy Technology Data Exchange (ETDEWEB)

Yibirin, H. [Ohio State Univ., Wooster, OH (United States); Stehouwer, R. C. [Ohio State Univ., Wooster, OH (United States); Bigham, J. M. [Ohio State Univ., Wooster, OH (United States); Soto, U. I. [Ohio State Univ., Wooster, OH (United States)

1997-01-31

^-1) that contained 20% CaSO₄ with variable hydration state. Artificial blends of these materials containing 4% and 8% Mg(OH)₂ were prepared for comparison with other liming agents in the form of agricultural limestone and gypsum amended with laboratory Ca(OH)₂.

Gypsum (CaSO4·2H2O) Scaling on Polybenzimidazole and Cellulose Acetate Hollow Fiber Membranes under Forward Osmosis

Science.gov (United States)

Chen, Si Cong; Su, Jincai; Fu, Feng-Jiang; Mi, Baoxia; Chung, Tai-Shung

2013-01-01

We have examined the gypsum (CaSO4·2H2O) scaling phenomena on membranes with different physicochemical properties in forward osmosis (FO) processes. Three hollow fiber membranes made of (1) cellulose acetate (CA), (2) polybenzimidazole (PBI)/polyethersulfone (PES) and (3) PBI-polyhedral oligomeric silsesquioxane (POSS)/polyacrylonitrile (PAN) were studied. For the first time in FO processes, we have found that surface ionic interactions dominate gypsum scaling on the membrane surface. A 70% flux reduction was observed on negatively charged CA and PBI membrane surfaces, due to strong attractive forces. The PBI membrane surface also showed a slightly positive charge at a low pH value of 3 and exhibited a 30% flux reduction. The atomic force microscopy (AFM) force measurements confirmed a strong repulsive force between gypsum and PBI at a pH value of 3. The newly developed PBI-POSS/PAN membrane had ridge morphology and a contact angle of 51.42° ± 14.85° after the addition of hydrophilic POSS nanoparticles and 3 min thermal treatment at 95 °C. Minimal scaling and an only 1.3% flux reduction were observed at a pH value of 3. Such a ridge structure may reduce scaling by not providing a locally flat surface to the crystallite at a pH value of 3; thus, gypsum would be easily washed away from the surface. PMID:24957062

Effect of alginate chemical disinfection on bacterial count over gypsum cast

OpenAIRE

Haralur, Satheesh B.; Al-Dowah, Omir S.; Gana, Naif S.; Al-Hytham, Abdullah

2012-01-01

PURPOSE To evaluate the efficacy of sodium hypochlorite (1 : 10) and iodophor disinfectants on alginate impressions along with their effect on the survived bacterium count on the gypsum cast. MATERIALS AND METHODS Four alginate impression on each dentate patients were made, of which Group I were not washed or disinfected, Group II impressions were merely washed with water, Group III were disinfected by spraying with sodium hypochlorite (1 : 10), Group IV were disinfected with iodophor (1 : 21...

Food irradiation in the United States

International Nuclear Information System (INIS)

Pauli, G.H.

1991-01-01

Since 1963, some irradiated foods have been permitted for sale in the United States. Yet, at this time, commercial application has been limited to irradiation of a relatively small fraction of the spices and seasonings used as ingredients in other foods. The current situation regarding irradiated foods in the United States and how it developed is discussed. The author writes from experience gained as a Government regulator concerned primarily with ensuring safety of food and therefore this is stressed together with the crucial role played by consumers and industry. (author)

Physical and mechanical characterization of gypsum boards containing phase change materials for latent heat storage

Directory of Open Access Journals (Sweden)

Oliver-Ramírez, A.

2011-09-01

Full Text Available This article describes the design and manufacture of a gypsum board which, despite its 45 % wt content of phase change materials, meets the minimum physical and mechanical requirements laid down in the legislation on gypsum plasters (Spanish and European standard UNE EN 13279 and Spanish specifications for gypsum acceptance, RY 85. Under this design, a one-metre square, 1.5-cm thick board contains 4.75 kg of PCM, much more than in any prior drylining (the maximum attained to date is 3 kg per m². The mechanical and physical characteristics of this new composite were previously improved with two joint-action additives: polypropylene fibres and melamine formaldehyde as a dispersing agent. In the 20-30 ºC temperature range, a gypsum board 1.5 cm thick containing this percentage of PCMs can store five times more thermal energy than conventional plasterboard of the same thickness, and the same amount of energy as half-foot hollow brick masonry.

En esta investigación se ha diseñado y fabricado un panel de escayola que incorpora un 45% en peso de material de cambio de fase, manteniendo las propiedades físicas y mecánicas exigidas en la normativa de aplicación para yesos de construcción (UNE EN 13279 y referencias a la RY 85. Así, un panel de 1,0 m² y 1,5 cm de espesor, contiene 4,75 kg de PCM, cantidad muy superior a la conseguida hasta la fecha (3 kg/m2. Para ello se ha mejorado previamente sus prestaciones mecánicas y físicas mediante adiciones binarias: fibras de polipropileno y dispersión de melanina formaldehído. Este porcentaje es capaz de almacenar en 1,5 cm de espesor cinco veces la energía térmica de un panel de cartón yeso con el mismo espesor y la misma cantidad que una fábrica de 1/2 pie de ladrillo hueco, en el rango de temperaturas próximas a la de confort (20-30 ºC.

Climatic control on the growth of gigantic gypsum crystals within hypogenic caves (Naica mine, Mexico)?

Science.gov (United States)

Garofalo, Paolo S.; Fricker, Mattias B.; Günther, Detlef; Forti, Paolo; Mercuri, Anna-Maria; Loreti, Mara; Capaccioni, Bruno

2010-01-01

Three hypogenic caves within the Naica mine of Mexico ( Cueva de los Cristales — CLC, Ojo de la Reina — OR, and Cueva de las Velas — CLV) host spectacular gypsum crystals up to 11 m in length. These caves are close to another shallow cave of the area ( Cueva de las Espadas — CLE), with which they cover a 160 m-deep vertical section of the local drainage basin. Similar to other hypogenic caves, all these caves lack a direct connection with the land surface and should be unrelated with climate. A record of multi-technique fluid inclusion data and pollen spectra from cave and mine gypsum indicates surprisingly that climatic changes occurring at Naica could have controlled fluid composition in these caves, and hence crystal growth. Microthermometry and LA-ICP-Mass Spectrometry of fluid inclusions indicate that the shallow, chemically peculiar, saline fluid (up to 7.7 eq. wt.%NaCl) of CLE could have formed from evaporation, during a dry and hot climatic period. The fluid of the deep caves was instead of low salinity (˜ 3.5 eq. wt.% NaCl) and chemically homogeneous, and was poorly affected by evaporation. We propose that mixing of these two fluids, generated at different depths of the Naica drainage basin, determined the stable supersaturation conditions for the gigantic gypsum crystals to grow. Fluid mixing was controlled by the hydraulic communication between CLE and the other deep caves, and must have taken place during cycles of warm-dry and fresh-wet climatic periods, which are known to have occurred in the region. Pollen grains from a 35 ka-old gypsum crystal of CLC corresponds to a fairly homogenous catchment basin made of a mixed broadleaf wet forest, which suggests precipitation during a fresh-wet climatic period and confirms our interpretation of the fluid inclusion data. The unusual combination of geological and geochemical factors of Naica suggests that other hypogenic caves found elsewhere may not host similar crystals. However, this work shows that

Use of Flue Gas Desulfurization (FGD) Gypsum as a Heavy Metal Stabilizer in Contaminated Soils

Science.gov (United States)

Flue Gas Desulfurization (FGD) gypsum is a synthetic by-product generated from the flue gas desulfurization process in coal power plants. It has several beneficial applications such as an ingredient in cement production, wallboard production and in agricultural practice as a soil...

The State Geologic Map Compilation (SGMC) geodatabase of the conterminous United States

Science.gov (United States)

Horton, John D.; San Juan, Carma A.; Stoeser, Douglas B.

2017-06-30

The State Geologic Map Compilation (SGMC) geodatabase of the conterminous United States (https://doi. org/10.5066/F7WH2N65) represents a seamless, spatial database of 48 State geologic maps that range from 1:50,000 to 1:1,000,000 scale. A national digital geologic map database is essential in interpreting other datasets that support numerous types of national-scale studies and assessments, such as those that provide geochemistry, remote sensing, or geophysical data. The SGMC is a compilation of the individual U.S. Geological Survey releases of the Preliminary Integrated Geologic Map Databases for the United States. The SGMC geodatabase also contains updated data for seven States and seven entirely new State geologic maps that have been added since the preliminary databases were published. Numerous errors have been corrected and enhancements added to the preliminary datasets using thorough quality assurance/quality control procedures. The SGMC is not a truly integrated geologic map database because geologic units have not been reconciled across State boundaries. However, the geologic data contained in each State geologic map have been standardized to allow spatial analyses of lithology, age, and stratigraphy at a national scale.

Exporting Rambutan to United States: One Reality?

International Nuclear Information System (INIS)

Ahmad Zainuri Mohd Dzomir; Zainon Othman; Mohd Sidek Othman

2011-01-01

Rambutan is a one of commodity that are passed by United States of America authority to be market in that states. The main condition for the approval is the exporter must use irradiation technology as quarantine treatment to monitor the insects in there. United States of America's Agriculture Department (USDA-APHIS) has make early survey to the facilities involved in exporting process chain to overview Malaysia preparedness for this purpose. This paper work will discussed the possibility of this exporting implemented based on conditions rule by the USDA. (author)

Recuperação de solos afetados por sais pela aplicação de gesso de jazida e calcário no Nordeste do Brasil Reclamation of salt-affected soils in Northeast Brazil with application of mined gypsum and limestone

Directory of Open Access Journals (Sweden)

Maria de F. C. Barros

2004-04-01

Full Text Available Objetivando-se avaliar o efeito da aplicação de corretivos químicos sobre as propriedades físicas e químicas, bem como na recuperação de solos afetados por sais do Perímetro Irrigado de Custódia, no Estado de Pernambuco, Brasil, realizou-se um experimento em colunas de solo, instaladas no Laboratório de Salinidade do Solo da Universidade Federal Rural de Pernambuco. Os tratamentos foram dispostos em um delineamento em blocos casualizados, com arranjamento fatorial de quatro solos, dois métodos de aplicação de gesso e gesso + calcário (aplicados na superfície e incorporados nos primeiros 5 cm da coluna de solo, duas combinações dos corretivos (100% de gesso + 0% de calcário e 80% de gesso + 20% de calcário, calculados com base na necessidade de gesso dos solos, e quatro faixas de granulometria de gesso (2,0 - 1,0, 1,0 -0,5, 0,5 - 0,3 e With the objective of evaluating the effect of the application of chemical amendments on the physical and chemical properties as well as on reclamation of the salt-affected soils in the "Perímetro Irrigado de Custódia", in Pernambuco state, Brazil, an experiment was carried out in soil columns installed at the Soil Salinity Laboratory of the Universidade Federal Rural de Pernambuco. The treatments were arranged in a randomized block design in a factorial scheme consisting of four soils, two methods of applications of gypsum and gypsum + limestone (applied on the surface and incorporated into the first 5 cm of the soil column, two combinations of the chemical amendments (100% gypsum and 80% gypsum + 20% limestone, calculated on the basis of gypsum requirement of soils and four granulometry gypsum fractions (2.0 - 1.0; 1.0 - 0.5; 0.5 - 0.3 and < 0.3 mm with three replications. In the saturation extract the electrical conductivity and the soluble cations were determined. The application of gypsum and the mixture of gypsum + limestone showed to be efficient for correction of soil sodicity, which

Wheat rusts in the United States in 2016

Science.gov (United States)

In 2016, wheat stripe rust caused by Puccinia striiformis f. sp. graminis was widespread throughout the United States. Cool temperatures and abundant rainfall in the southern Great Plains allowed stripe rust to become widely established and spread throughout the Great Plains and eastern United State...

Nucleation and growth of the Naica giant gypsum crystals.

Science.gov (United States)

Otálora, Fermín; García-Ruiz, JuanMa

2014-04-07

The Cave of Giant Crystals in the Naica mine (Mexico) is one of the most amazing displays of mineral beauty ever created in nature. In addition to the colossal crystals of gypsum, which in some cases exceed eleven meters in length and one meter in thickness, the scenery fashioned by the crystalline beams that thrust through the darkness of the cave from floor to ceiling with a luster like moonlight is a unique example of harmony based on crystal symmetry. We review the crystallogenesis of this remarkable and challenging phenomenon of mineralization near equilibrium that can be used to teach the basics of nucleation and crystal growth.

United States National Seismographic Network

International Nuclear Information System (INIS)

Buland, R.

1993-09-01

The concept of a United States National Seismograph Network (USNSN) dates back nearly 30 years. The idea was revived several times over the decades. but never funded. For, example, a national network was proposed and discussed at great length in the so called Bolt Report (U. S. Earthquake Observatories: Recommendations for a New National Network, National Academy Press, Washington, D.C., 1980, 122 pp). From the beginning, a national network was viewed as augmenting and complementing the relatively dense, predominantly short-period vertical coverage of selected areas provided by the Regional Seismograph Networks (RSN's) with a sparse, well-distributed network of three-component, observatory quality, permanent stations. The opportunity finally to begin developing a national network arose in 1986 with discussions between the US Geological Survey (USGS) and the Nuclear Regulatory Commission (NRC). Under the agreement signed in 1987, the NRC has provided $5 M in new funding for capital equipment (over the period 1987-1992) and the USGS has provided personnel and facilities to develop. deploy, and operate the network. Because the NRC funding was earmarked for the eastern United States, new USNSN station deployments are mostly east of 105 degree W longitude while the network in the western United States is mostly made up of cooperating stations (stations meeting USNSN design goals, but deployed and operated by other institutions which provide a logical extension to the USNSN)

37 CFR 1.413 - The United States International Searching Authority.

Science.gov (United States)

2010-07-01

... Processing Provisions General Information § 1.413 The United States International Searching Authority. (a... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false The United States International Searching Authority. 1.413 Section 1.413 Patents, Trademarks, and Copyrights UNITED STATES PATENT...

United States Attorney Prosecutions

Science.gov (United States)

1993-10-01

property of CocaCola Bottling Company, Fayetteville, North Carolina, of a value in excess of $100.00, in violation of Title 18 United States Code, Section...another, to-wit: a Cocacola soft drink machine, the amount of damage to said personal property being more than $200.00, in violation of North Carolina

77 FR 48542 - United States

Science.gov (United States)

2012-08-14

... litigation.'' United States v. Armour and Co., 402 U.S. 673, 681 (1971). Section 5 of the Clayton Act... relief in consent judgment that contained recitals in which defendants asserted their innocence); Armour...

United States Strategy for Mexico

National Research Council Canada - National Science Library

Centner, Robert C

2005-01-01

The security and stability of Mexico is of national interest to the United States, and a strong, effective alliance between the two countries is pivotal to our national defense strategy and economic prosperity...

Assessment of Mercury in Soils, Crops, Earthworms, and Water when Soil is Treated with Gypsum

Science.gov (United States)

Flue gas desulfurization (FGD) gypsum from fossil fuel combustion has many potential uses in agriculture, but there is concern about the potential environmental effects of its elevated mercury (Hg) concentration. The wet limestone scrubbing process that removes sulfur from flue gas (and produces gyp...

Evolution characteristic of gypsum-salt rocks of the upper member of Oligocene Lower Ganchaigou Fm in the Shizigou area, western Qaidam Basin

Directory of Open Access Journals (Sweden)

Dinghong Yi

2017-09-01

Full Text Available Over years of oil and gas exploration in the Qaidam Basin, reservoirs have been discovered in many layers. In the Shizigou area, western Qaidam Basin, the upper member of Oligocene Lower Ganchaigou Fm is an important target for oil and gas exploration, and gypsum-salt rocks are the high-quality caprocks for the preservation of oil and gas reservoirs in this area. For predicting oil and gas exploration direction and target in the western Qaidam Basin and providing guidance for its oil and gas exploration deployment, its depositional characteristics and environment of gypsum-salt rocks in this area were investigated based on the core observation, thin section identification, and analysis of grain size, sensitivity parameter ratios (Sr/Cu, Fe/Mn, (Fe + Al/(Ca + Mg, V/(V + Ni and Pr/Ph, pyrite content and inclusions. The following characteristics are identified. First, gypsum-salt rocks are mainly distributed in the depocenter of the lake basin and their thickness decreases towards the margin of the basin. They are laterally transformed into carbonate rocks or terrigenous clastic rocks. They are areally distributed in the shape of irregular ellipse. Second, gypsum-salt rocks are vertically developed mainly in the middle and upper parts of the upper member of Lower Ganchaigou Fm and they are interbedded with carbonate rocks or terrigenous clastic rocks. Their single layer thickness changes greatly, and there are many layers with good continuity. Third, Sand Group III to Group I in the upper member of Lower Ganchaigou Fm (inter-salt are of reductive water environment of semi-deep to deep lake facies due to their sedimentation in an arid and hot climate. It is concluded that gypsum-salt rocks of the upper member of Lower Ganchaigou Fm are distributed widely with great accumulative thickness in this area; and that they are originated from deep lake water by virtue of evaporation, concentration and crystallization in an arid and hot climate instead

NCHS - Injury Mortality: United States

Data.gov (United States)

U.S. Department of Health & Human Services — This dataset describes injury mortality in the United States beginning in 1999. Two concepts are included in the circumstances of an injury death: intent of injury...

Both Europe's and the United States' electrification

International Nuclear Information System (INIS)

Matly, M.

2006-01-01

While the United States quickly had the largest electrical indus in the world, electrification in rural areas ended about thirty years after most European countries. Public intervention is a deciding factor in completing electrification, and the late involvement by the American authorities explains the gap. However it would be wrong to oppose in Europe and in the United States a motivated public sector and little involved private companies. In both continents indeed, major private and public urban distributors were almost not involved in rural electrification processes, where local players prevailed: local communities around Europe, small and medium size business in some European countries such as France, co-operative companies in the United States. Additionally, there is an essential difference between electrification in Europe and in the United States. The former does not provide much more than lighting and its success leaves few traces in popular memories; the latter includes many facilities and services, changes the lives of rural populations and is celebrated a such. Whereas the colonial venture keep European economies away from their domestic markets, while in the United States the urban market growth contents large companies, the American co-operative movement is right to believe in the existence of a large electrical equipment market among farmers then considered poor and behind. It even uses the market to complete a more profitable and less costly electrification. Electricity stories that offer food for the thoughts of Third World decision makers and power companies, when they entrust most rural electrification to their large urban companies and deny the existence of a real equipment market in their own rural world. (author)

Asian Immigration: The View from the United States.

Science.gov (United States)

Gardner, Robert W.

1992-01-01

Examines contemporary Asian immigration to the United States from a U.S. perspective. Analyzes immigration policies and data on recent immigration from Asia. Discusses impacts concerning the United States and the immigrants themselves and speculates on future immigration. The composition of Asian immigration might change, and the number might…

26 CFR 1.956-2 - Definition of United States property.

Science.gov (United States)

2010-04-01

..., which is— (i) Tangible property (real or personal) located in the United States; (ii) Stock of a... year ending June 30, 1964, R Corporation's increase in earnings invested in United States property for... United States property during its taxable year 1965, S Corporation's increase in earnings invested in...

Licensed pertussis vaccines in the United States: History and current state

OpenAIRE

Klein, Nicola P

2014-01-01

The United States switched from whole cell to acellular pertussis vaccines in the 1990s following global concerns with the safety of the whole cell vaccines. Despite high levels of acellular pertussis vaccine coverage, the United States and other countries are experiencing large pertussis outbreaks. The aim of this article is to describe the historical context which led to acellular pertussis vaccine development, focusing on vaccines currently licensed in the US, and to review evidence that w...

Nations United: The United Nations, the United States, and the Global Campaign Against Terrorism. A Curriculum Unit & Video for Secondary Schools.

Science.gov (United States)

Houlihan, Christina; McLeod, Shannon

This curriculum unit and 1-hour videotape are designed to help students understand the purpose and functions of the United Nations (UN) and explore the relationship between the United Nations and the United States. The UN's role in the global counterterrorism campaign serves as a case study for the unit. The students are asked to develop a basic…

Remediation of saline-sodic soil with flue gas desulfurization gypsum in a reclaimed tidal flat of southeast China.

Science.gov (United States)

Mao, Yumei; Li, Xiaping; Dick, Warren A; Chen, Liming

2016-07-01

Salinization and sodicity are obstacles for vegetation reconstruction of coastal tidal flat soils. A study was conducted with flue gas desulfurization (FGD)-gypsum applied at rates of 0, 15, 30, 45 and 60Mg/ha to remediate tidal flat soils of the Yangtze River estuary. Exchangeable sodium percentage (ESP), exchangeable sodium (ExNa), pH, soluble salt concentration, and composition of soluble salts were measured in 10cm increments from the surface to 30cm depth after 6 and 18months. The results indicated that the effect of FGD-gypsum is greatest in the 0-10cm mixing soil layer and 60Mg/ha was the optimal rate that can reduce the ESP to below 6% and decrease soil pH to neutral (7.0). The improvement effect was reached after 6months, and remained after 18months. The composition of soluble salts was transformed from sodic salt ions mainly containing Na(+), HCO3(-)+CO3(2-) and Cl(-) to neutral salt ions mainly containing Ca(2+) and SO4(2-). Non-halophyte plants were survived at 90%. The study demonstrates that the use of FGD-gypsum for remediating tidal flat soils is promising. Copyright © 2016. Published by Elsevier B.V.

Estimated United States Transportation Energy Use 2005

Energy Technology Data Exchange (ETDEWEB)

Smith, C A; Simon, A J; Belles, R D

2011-11-09

A flow chart depicting energy flow in the transportation sector of the United States economy in 2005 has been constructed from publicly available data and estimates of national energy use patterns. Approximately 31,000 trillion British Thermal Units (trBTUs) of energy were used throughout the United States in transportation activities. Vehicles used in these activities include automobiles, motorcycles, trucks, buses, airplanes, rail, and ships. The transportation sector is powered primarily by petroleum-derived fuels (gasoline, diesel and jet fuel). Biomass-derived fuels, electricity and natural gas-derived fuels are also used. The flow patterns represent a comprehensive systems view of energy used within the transportation sector.

United States of America National Report

International Nuclear Information System (INIS)

1992-01-01

The United States has produced this report as part of the preparations for the United Nations Conference on Environment and Development (UNCED) to be held in Brazil in June 1992. It summarizes this nation's efforts to protect and enhance the quality of the human environment in concert with its efforts to provide economic well-being during the two decades since the United Nations Conference on the Human Environment was held in Stockholm. The information presented in this report is primarily and deliberately retrospective. It is an attempt to portray the many human, economic and natural resources of the United States, to describe resource use and the principal national laws and programs established to protect these resources, and to analyze key issues on the agenda of UNCED. This analysis is presented in terms of past and present conditions and trends, measures of progress made in responding to the key issues, and a summary of government activities, underway or pending, to address ongoing or newly emerging national environmental and resource management problems

African Journals Online: United States Minor Outlying Islands

African Journals Online (AJOL)

African Journals Online: United States Minor Outlying Islands. Home > African Journals Online: United States Minor Outlying Islands. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Browse By Category · Browse Alphabetically · Browse By Country · List All Titles ...

Ultrasonically nebulised electrolysed oxidising water: a promising new infection control programme for impressions, metals and gypsum casts used in dental hospitals.

Science.gov (United States)

Wu, G; Yu, X; Gu, Z

2008-04-01

Controlling the transmission of infectious diseases by impressions, metals and dental casts in dental hospitals remains a challenge. Current disinfection methods have various drawbacks. This study introduced and provided a preliminary evaluation of the feasibility of using ultrasonically nebulised, electrolysed oxidising water (UNEOW) as a new infection control programme. UNEOW was produced from freshly generated electrolysed oxidising water (EOW). Samples of impressions, titanium and gypsum were subjected to the following treatments: (1) immersion in 1% sodium hypochlorite for 10min; (2) immersion in EOW for 10min; (3) exposure to UNEOW for 15, 30 and 45min; (4) no disinfection (control). Bactericidal efficacy was examined using Staphylococcus aureus and Bacillus subtilis var. niger spores as indicators. Dimensional accuracy, surface quality, and effect of corrosion were also evaluated for the different samples. Results showed that except for B. subtilis var. niger spores on gypsum casts, the bacterial reduction log(10) values after 30-45min treatment with UNEOW were all above 4. The impression dimensional changes showed no difference between control and UNEOW groups, but both were significantly lower than the EOW and sodium hypochlorite groups (Pimpressions and gypsum casts. No assessable corrosion was found on the titanium surface after a 45min treatment with UNEOW. The findings indicated that use of UNEOW is a feasible and promising approach for controlling the transmission of infectious diseases by impressions, gypsum casts and denture metals in dental facilities.

Use of the “red gypsum” industrial waste as substitute of natural gypsum for commercial cements manufacturing

Directory of Open Access Journals (Sweden)

Gázquez, M. J.

2012-06-01

Full Text Available The main objective of this research has been the valorisation of a waste from the TiO2 production process (sulphate method, called red gypsum, in the production of cements. This waste is mainly formed by di-hydrate calcium sulphate and iron hydroxides. To cover this objective it has been necessary to perform the physico-chemical characterisation of the red gypsum as well as the main components in the production of cements and of the new cements generated. Moreover, for the red gypsum, has been analyzed its radioactive content because it is generated in a NORM (Naturally Occurring Radioactive Materials industry. Finally, the most important properties of the obtained cements with different proportions of red gypsum in their composition have been studied by comparing them with the standard ones obtained in a Portland cement. Lastly, we have demonstrated that the new cements fulfil all the quality tests imposed by the European legislation.

El objetivo de esta investigación ha sido analizar la valorización de un residuo generado en el proceso de producción de dióxido de titanio (vía sulfato, denominado yeso rojo, en la producción de cementos. Dicho residuo está compuesto fundamentalmente por sulfato de calcio di-hidratado e hidróxidos de hierro. Para ello, ha sido necesaria la caracterización físico-química del yeso rojo, así como la de los otros componentes fundamentales en la fabricación de cementos y de los cementos generados con el mencionado residuo. Además, en el caso del yeso rojo, se ha analizado su contenido radiactivo al generarse éste en una industria NORM (Natural Occurring Radioactive Materials. Posteriormente, se han estudiado las propiedades más importantes de los cementos producidos con diferentes porcentajes de yeso rojo añadido, comparando estas mezclas con las propiedades de un cemento Portland comercial, comprobándose que se cumplen todas las normas Europeas de calidad exigibles.

Refugee Status Required for Resettlement in the United States

Science.gov (United States)

2017-06-09

STATES REFUGEE ADMISSIONS PROGRAM FLOWCHART ...the American public’s concerns. 50 APPENDIX A UNITED STATES REFUGEE ADMISSIONS PROGRAM FLOWCHART Source: US Citizenship and Immigration...TITLE AND SUBTITLE Refugee Status Required for Resettlement in the United States 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

Latin America and the United States: What Do United States History Textbooks Tell Us?

Science.gov (United States)

Fleming, Dan B.

1982-01-01

Evaluates how U.S.-Latin American relations are presented in high school U.S. history textbooks. An examination of 10 textbooks published between 1977-81 revealed inadequate coverage of Latin American cultural diversity and United States foreign policy from the Latin American perspective. (AM)

Preparation of School Psychologists in the United States

Science.gov (United States)

Joyce-Beaulieu, Diana; Rossen, Eric

2014-01-01

School psychology in the United States continues to evolve in response to shifts in the country's demographic characteristics, an increasing focus on the importance of child mental health, together with health and education reforms. The landscape of school psychological services in the United States also is shaped through the changing roles and…

United States position on severe accidents

International Nuclear Information System (INIS)

Ross, D.F.

1988-01-01

The United States policy on severe accidents was published in 1985 for both new plant applications and for existing plants. Implementation of this policy is in progress. This policy, aided by a related safety goal policy and by analysis capabilities emerging from improved understanding of accident phenomenology, is viewed as a logical development from the pioneering work in the WASH-1400 Reactor Safety Study published by the United States Nuclear Regulatory Commission (NRC) in 1975. This work provided an estimate of the probability and consequences of severe accidents which, prior to that time, had been mostly evaluated by somewhat arbitrary assumptions dating back 30 years. The early history of severe accident evaluation is briefly summarized for the period 1957-1979. Then, the galvanizing action of Three Mile Island Unit 2 (TMI-2) on severe accident analysis, experimentation and regulation is reviewed. Expressions of US policy in the form of rulemaking, severe accident policy, safety research, safety goal policy and court decisions (on adequacy of safety) are discussed. Finally, the NRC policy as of March 1988 is stated, along with a prospective look at the next few years. (author). 19 refs

Understanding human trafficking in the United States.

Science.gov (United States)

Logan, T K; Walker, Robert; Hunt, Gretchen

2009-01-01

The topic of modern-day slavery or human trafficking has received increased media and national attention. However, to date there has been limited research on the nature and scope of human trafficking in the United States. This article describes and synthesizes nine reports that assess the U.S. service organizations' legal representative knowledge of, and experience with, human trafficking cases, as well as information from actual cases and media reports. This article has five main goals: (a) to define what human trafficking is, and is not; (b) to describe factors identified as contributing to vulnerability to being trafficked and keeping a person entrapped in the situation; (c) to examine how the crime of human trafficking differs from other kinds of crimes in the United States; (d) to explore how human trafficking victims are identified; and, (e) to provide recommendations to better address human trafficking in the United States.

Two distinctive new species of Commicarpus (Nyctaginaceae) from gypsum outcrops in eastern Ethiopia

DEFF Research Database (Denmark)

Friis, Ib; Gilbert, Michael G.; Weber, Odile

2016-01-01

During field trips in 2013 and 2014, two distinctive plants belonging to the genus Commicarpus were collected in the Lele Hills, Bale Zone, eastern Ethiopia, on outcrops of sedimentary rock belonging to the Gorrahei Formation with high contents of gypsum. The plants are here described as two new...

42 CFR 410.175 - Alien absent from the United States.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Alien absent from the United States. 410.175... Alien absent from the United States. (a) Medicare does not pay Part B benefits for services furnished to... during the first full calendar month the alien is back in the United States. [53 FR 6634, Mar. 2, 1988] ...

Inventory of power plants in the United States. [By state within standard Federal Regions, using county codes

Energy Technology Data Exchange (ETDEWEB)

None

1977-12-01

The purpose of this inventory of power plants is to provide a ready reference for planners whose focus is on the state, standard Federal region, and/or national level. Thus the inventory is compiled alphabetically by state within standard Federal regions. The units are listed alphabetically within electric utility systems which in turn are listed alphabetically within states. The locations are identified to county level according to the Federal Information Processing Standards Publication Counties and County Equivalents of the States of the United States. Data compiled include existing and projected electrical generation units, jointly owned units, and projected construction units.

Norovirus in the United States

Centers for Disease Control (CDC) Podcasts

2013-09-09

Dr. Aron Hall, a CDC epidemiologist specializing in norovirus, discusses the impact of norovirus in the United States.  Created: 9/9/2013 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 9/17/2013.

Lipid and Phylogenetic Analysis of a Gypsum-hosted Endoevaporitic Microbial Community

Science.gov (United States)

Turk, K. A.; Jahnke, L. L.; Green, S. J.; Kubo, M. D.; Vogel, M. B.; Des Marais, D. J.

2007-12-01

Gypsum evaporites host diverse, productive and volumetrically significant microbial communities and are relevant modern-day analogs to both Precambrian sabkha deposits and, potentially, Martian evaporites. Extensive evaporites form in subaqueous environments of high salinity ponds (>150 permil) maintained by the Exportadora de Sal, S. A. (ESSA) in Guerrero Negro, B.C.S., Mexico. A gypsarenite (reworked clastic gypsum) crust found along the southeast margin of ESSA's Pond 9 was collected in February 2004 and each vibrantly colored layer in the top centimeter was sampled. Extant microbial communities from each layer were characterized using complementary culture-independent molecular techniques, lipid biomarker analysis, and compound specific isotopic analysis. Coupling molecular analysis with lipid biomarker analysis revealed that oxygenic photosynthetic organisms dominate the surface layers (top 3 mm). Polar lipids from the surface layers consisted predominantly of glycolipids, which are characteristic of algae, cyanobacteria and green anoxygenic photosynthetic bacteria. Consistent with prior analyses of gypsum evaporites, 16S rRNA gene clone libraries indicate that cyanobacterial populations belong primarily to the genus Cyanothece. The bacterial community below the surface layers is more diverse and dominated by anaerobic organisms. Phototrophic purple sulfur bacteria, sulfate-reducing bacteria (SRB), and Bacteroidetes were particularly abundant. The relative abundances of SRB increased with depth; Desulfobacteraceae clones were distributed throughout the crust, but not at the surface, while Desulfovibrionaceae clones were found predominantly in the deepest layers. These molecular results are consistent with fatty acid biomarker analysis. δ13C values of major lipid classes in the crust and sediment range from 14 to 36‰, which is considerably lower than corresponding values for benthic Microcoleus-dominated cyanobacterial mats found at lower salinities at ESSA

Fragmentation of Continental United States Forests

Science.gov (United States)

Kurt H. Riitters; James D. Wickham; Robert V. O' Neill; K. Bruce Jones; Elizabeth R. Smith; John W. Coulston; Timothy G. Wade; Jonathan H. Smith

2002-01-01

We report a multiple-scale analysis of forest fragmentation based on 30-m (0.09 ha pixel-1) land- cover maps for the conterminous United States. Each 0.09-ha unit of forest was classified according to fragmentation indexes measured within the surrounding landscape, for five landscape sizes including 2.25, 7.29, 65.61, 590.49, and 5314.41 ha....

Trial by jury in the United States

Directory of Open Access Journals (Sweden)

Lochhead Robert

2015-10-01

Full Text Available Th e Republic of Moldova is considering the adoption of trial by jury in select criminal cases. Th e following article is intended to contribute to the discussion of that proposal. Th e article will briefl y describe the history of juries under the English common law and as adopted by the United States. It will then outline some of the basic procedures in trials by jury as currently practiced in the United States federal court system.

CEDAW in the Eyes of the United States

Directory of Open Access Journals (Sweden)

Al Shraideh Saleh

2017-12-01

Full Text Available Despite the large number of reservations registered by Member countries, making it one of the, if not the, most heavily reserved human rights treaties; the Convention on the Elimination of All Forms of Discrimination Against Women (CEDAW has managed to achieve a very high rate of states’ membership [1]. Currently, 187 countries out of the 193 United Nations Members are parties to CEDAW [2]. What is strange to digest, however, is the fact that the United States is one of the seven countries that are yet to ratify the Convention [3]. This article provides an insight into the position of the United States from the ratification of CEDAW. It examines the merits of arguments made for and against the ratification and their rationale to provide a better understanding that explains what is considered by many as a buzzling stand of the United States from the Convention.

Global context for the United States Forest Sector in 2030

Science.gov (United States)

James Turner; Joseph Buongiorno; Shushuai Zhu; Jeffrey P. Prestemon

2005-01-01

The purpose of this study was to identify markets for, and competitors to, the United States forest industries in the next 30 years. The Global Forest Products Model was used to make predictions of international demand, supply, trade, and prices, conditional on the last RPA Timber Assessment projections for the United States. It was found that the United States, Japan...

A functional intranet for the United States Coast Guard Unit

OpenAIRE

Hannah, Robert Todd.

1998-01-01

Approved for public release; distribution in unlimited. This thesis describes the complete development process of a friendly functional Intranet for an operational United States Coast Guard (USCG) electronic Support Unit (ESU) in Alameda, California. The final product is suitable for immediate use. It may also be used as a prototype for future Intranet development efforts. The methodology used to develop a finished, working product provides the core subject matter for this thesis. The disc...

Residency training in the United States: What foreign medical ...

African Journals Online (AJOL)

FMGs) planning to pursue post-graduate residency training in the United States of America (USA). While the number of residency training positions is shrinking, and the number of United States graduates has steadily declined over the past ...

The state of amphibians in the United States

Science.gov (United States)

Muths, E.; Adams, M.J.; Grant, E.H.C.; Miller, D.; Corn, P.S.; Ball, L.C.

2012-01-01

More than 25 years ago, scientists began to identify unexplained declines in amphibian populations around the world. Much has been learned since then, but amphibian declines have not abated and the interactions among the various threats to amphibians are not clear. Amphibian decline is a problem of local, national, and international scope that can affect ecosystem function, biodiversity, and commerce. This fact sheet provides a snapshot of the state of the amphibians and introduces examples to illustrate the range of issues in the United States.

Inventory of power plants in the United States, 1993

International Nuclear Information System (INIS)

1994-12-01

The Inventory of Power Plants in the United States is prepared annually by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), U.S. Department of Energy (DOE). The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. Data summarized in this report are useful to a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended

Inventory of power plants in the United States, 1993

Energy Technology Data Exchange (ETDEWEB)

1994-12-01

The Inventory of Power Plants in the United States is prepared annually by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), U.S. Department of Energy (DOE). The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. Data summarized in this report are useful to a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended.

Use of Internet Search Data to Monitor Rotavirus Vaccine Impact in the United States, United Kingdom, and Mexico.

Science.gov (United States)

Shah, Minesh P; Lopman, Benjamin A; Tate, Jacqueline E; Harris, John; Esparza-Aguilar, Marcelino; Sanchez-Uribe, Edgar; Richardson, Vesta; Steiner, Claudia A; Parashar, Umesh D

2018-02-19

Previous studies have found a strong correlation between internet search and public health surveillance data. Less is known about how search data respond to public health interventions, such as vaccination, and the consistency of responses in different countries. In this study, we aimed to study the correlation between internet searches for "rotavirus" and rotavirus disease activity in the United States, United Kingdom, and Mexico before and after introduction of rotavirus vaccine. We compared time series of internet searches for "rotavirus" from Google Trends with rotavirus laboratory reports from the United States and United Kingdom and with hospitalizations for acute gastroenteritis in the United States and Mexico. Using time and location parameters, Google quantifies an internet query share (IQS) to measure the relative search volume for specific terms. We analyzed the correlation between IQS and laboratory and hospitalization data before and after national vaccine introductions. There was a strong positive correlation between the rotavirus IQS and laboratory reports in the United States (R2 = 0.79) and United Kingdom (R2 = 0.60) and between the rotavirus IQS and acute gastroenteritis hospitalizations in the United States (R2 = 0.87) and Mexico (R2 = 0.69) (P United States and by 70% (95% CI, 55%-86%) in Mexico. In the United Kingdom, there was a loss of seasonal variation after vaccine introduction. Rotavirus internet search data trends mirrored national rotavirus laboratory trends in the United States and United Kingdom and gastroenteritis-hospitalization data in the United States and Mexico; lower correlations were found after rotavirus vaccine introduction. Published by Oxford University Press on behalf of The Journal of the Pediatric Infectious Diseases Society 2017. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Licensed pertussis vaccines in the United States. History and current state.

Science.gov (United States)

Klein, Nicola P

2014-01-01

The United States switched from whole cell to acellular pertussis vaccines in the 1990s following global concerns with the safety of the whole cell vaccines. Despite high levels of acellular pertussis vaccine coverage, the United States and other countries are experiencing large pertussis outbreaks. The aim of this article is to describe the historical context which led to acellular pertussis vaccine development, focusing on vaccines currently licensed in the US, and to review evidence that waning protection following licensed acellular pertussis vaccines have been significant factors in the widespread reappearance of pertussis.

The United States initiative for international radioactive source management (ISRM)

International Nuclear Information System (INIS)

Naraine, N.; Karhnak, J.

1999-01-01

The United States takes seriously the potential problems from uncontrolled radioactive sources. To address these problems, the United States Department of State is leading the development of an initiative for International Radioactive Source Management (ISRM). The Department of State, through a number of Federal and state agencies, regulatory bodies and private industry, will endeavor to provide coordinated support to the international community, particularly through IAEA, to assist in the development and implementation of risk-based clearance levels to support import/export of radioactive contaminated metals and the tracking, management, identification, remediation, and disposition of 'lost sources' entering nation states and targeted industries. The United States believes that the international control of radioactive sources is critical in avoiding wide-spread contamination of the world metal supply. Thus the initiative has four objectives: (1) Protect sources from becoming lost (Tracking management); (2) Identify primary locations where sources have been lost (Stop future losses); (3) Locate lost sources (monitor and retrieve); and (4) Educate and train (deploy knowledge and technology). A number of efforts already underway in the United States support the overall initiative. The EPA has provided a grant to the Conference of Radiation Program Control Directors (CRCPD) to develop a nation-wide program for the disposition of orphaned radioactive sources. This program now has internet visibility and a toll-free telephone number to call for assistance in the disposal of sources. The Nuclear Regulatory Commission (NRC), the Department of Energy (DOE), and other government agencies as well as private companies are assisting CRCPD in this program. The NRC has begun a program to improve control of radioactive sources in the United States, and also intends to promulgate a regulation defining conditions for the release of materials from licensed facilities. The DOE is

Antiabortion violence in the United States.

Science.gov (United States)

Russo, Jennefer A; Schumacher, Kristin L; Creinin, Mitchell D

2012-11-01

This study was conducted to determine if an association exists between the amount of harassment and violence directed against abortion providers and the restrictiveness of state laws relating to family planning. We used responses from a July 2010 survey of 357 abortion providers in 50 states to determine their experience of antiabortion harassment and violence. Their responses were grouped and analyzed in relation to a published grading of state laws in the United States (A, B, C, D and F) as they relate to restrictions on family planning services. Group by group comparison of respondents illustrates that the difference in the number of reported incidents of minor vandalism by group is statistically significant (A vs. C, p=.07; A vs. D, p=.017; A vs. F, p=.0002). Incidents of harassment follow a similar pattern. There were no differences noted overall for violence or major vandalism. Major violence, including eight murders, is a new occurrence in the last two decades. Harassment of abortion providers in the United States has an association with the restrictiveness of state abortion laws. In the last two decades, murder of abortion providers has become an unfortunate part of the violence. Copyright © 2012 Elsevier Inc. All rights reserved.

Masturbation in the United States.

Science.gov (United States)

Das, Aniruddha

2007-01-01

Using data from the nationally representative National Health and Social Life Survey, this study queried the correlates of masturbation in the United States in 1992. Among those aged 18-60, 38% (CI, 35-41) of women and 61% (CI, 57-65) of men reported any masturbation over the preceding year. The system of factors underlying masturbation was similar for both genders, consistent with a convergence in gender patterns of sexual expression in the United States. Among both women and men, masturbation responded to a stable sexualized personality pattern, catalyzed by early-life factors and manifested in current sexual traits. Strikingly, the masturbation-partnered sex linkage, often conceptualized either as compensating for unsatisfying sex or complementing a satisfactory sex life, appeared to be bimodal for both genders. For some, masturbation complemented an active and pleasurable sex life, while among others, it compensated for a lack of partnered sex or satisfaction in sex.

Permeability of gypsum samples dehydrated in air

Science.gov (United States)

Milsch, Harald; Priegnitz, Mike; Blöcher, Guido

2011-09-01

We report on changes in rock permeability induced by devolatilization reactions using gypsum as a reference analog material. Cylindrical samples of natural alabaster were dehydrated in air (dry) for up to 800 h at ambient pressure and temperatures between 378 and 423 K. Subsequently, the reaction kinetics, so induced changes in porosity, and the concurrent evolution of sample permeability were constrained. Weighing the heated samples in predefined time intervals yielded the reaction progress where the stoichiometric mass balance indicated an ultimate and complete dehydration to anhydrite regardless of temperature. Porosity showed to continuously increase with reaction progress from approximately 2% to 30%, whilst the initial bulk volume remained unchanged. Within these limits permeability significantly increased with porosity by almost three orders of magnitude from approximately 7 × 10-19 m2 to 3 × 10-16 m2. We show that - when mechanical and hydraulic feedbacks can be excluded - permeability, reaction progress, and porosity are related unequivocally.

Research on Anoplophora glabripennis in the United States

Science.gov (United States)

Robert A. Haack

2003-01-01

In the mid-1990s it was estimated that more than 400 exotic (non-native) forest insects had already become established in the United States (HAACK and BYLER, 1993; MATTSON et al., 1994; NIEMELA and MATTSON, 1996). This number has continued to grow with new exotics discovered annually in the United States (HAACK, 2002; HAACK and POLAND, 2001; HAACK et al., 2002). One...

Leading Causes of Death in Males United States, 2010

Science.gov (United States)

... What’s this? Submit What’s this? Submit Button Leading Causes of Death in Males and Females, United States Recommend on ... to current and previous listings for the leading causes of death for males and females in the United States. ...

76 FR 18198 - European Union-United States Atlantis Program

Science.gov (United States)

2011-04-01

... DEPARTMENT OF EDUCATION European Union-United States Atlantis Program AGENCY: Office of...)--Special Focus Competition: European Union-(EU) United States (U.S.) Atlantis Program Notice inviting... and Culture, European Commission for funding under a separate but parallel EU competition. Within this...

Development of Water Quality Modeling in the United States

Science.gov (United States)

This presentation describes historical trends in water quality model development in the United States, reviews current efforts, and projects promising future directions. Water quality modeling has a relatively long history in the United States. While its origins lie in the work...

Distribution of sulphur isotopes of sulphates in groundwaters from the principal artesian aquifer of Florida and the Edwards aquifer of Texas, United States of America

International Nuclear Information System (INIS)

Rightmire, C.T.; Pearson, F.J. Jr.; Back, W.; Rye, R.O.; Hanshaw, B.B.

1974-01-01

New information on the sources of sulphate dissolved in groundwater is obtainable from the measurement of the sulphur isotope composition of sulphates. Field studies in the Floridan aquifer, Florida, and the Edwards aquifer, Texas, show that the use of sulphur isotope data in conjunction with hydrologic and geochemical techniques permits refinements of interpretation. In the Floridan the interpretation of the chemical data, particularly the SO 4 2- concentration and the SO 4 2- /Cl - ratio, leads to the conclusion that recharging maritime rainfall, solution of intraformational gypsum, and mixing with ocean-like saline waters are the sources of sulphate in the groundwater. Sulphur isotope data substantiate this interpretation. The Edwards in the area studied can be separated into two hydrologie units on the basis of water chemistry and aquifer characteristics. The sulphide-free waters in the part of the aquifer upgradient from a distinct sulphide boundary are low in sulphate (less than 100 mg/1) and contain no sulphide. The waters downgradient from that boundary contain greater than 150 mg/1 sulphate and all contain measurable quantities of sulphide. Interpretation of the SO 4 2- concentration and SO 4 2- /Cl ratio on the basis of the Florida study leads to the erroneous conclusion that the solution of intraformational gypsum is again a major source of sulphate in the sulphide-free part of the aquifer. Isotope analyses, however, show that the gypsum is likely to be Permian in age and introduced into the aquifer by the recharge water. The absence of evidence for enrichment in 34 S in the sulphate in the sulphide-bearing portion of the aquifer leads to the possibility of H 2 S migration upgradient from downdip oil fields. (author)

Solar energy in the United States

International Nuclear Information System (INIS)

Ochoa, D.; Slaoui, A.; Soler, R.; Bermudez, V.

2009-01-01

Written by a group of five French experts who visited several research centres, innovating companies and solar power stations in the United States, this report first proposes an overview of solar energy in the United States, indicating and commenting the respective shares of different renewable energies in the production, focusing on the photovoltaic energy production and its RD sector. The second part presents industrial and research activities in the solar sector, and more specifically photovoltaic technologies (silicon and thin layer technology) and solar concentrators (thermal solar concentrators, photovoltaic concentrators). The last chapter presents the academic research activities in different universities (California Tech Beckman Institute, Stanford, National Renewable Energy Laboratory, Colorado School of Mines)

Corrosion behaviour of metallic and non-metallic materials in various media in the Anhydrite and Gypsum Mine Felsenau/AG

International Nuclear Information System (INIS)

Laske, D.; Wiedemann, K.H.

1983-10-01

The final underground disposal of radioactive wastes necessitates container materials with a good long-term resistance against corrosion from both external agents and the solidification matrix inside. For low- and medium-level active waste, repositories in anhydrite sites, among others, are under consideration. Sheet and plate samples from 14 metallic and 8 non-metallic materials have been tested for 5 years in a tunnel in the Anhydrite and Gypsum Mine Felsenau/AG for their corrosion resistance in the tunnel atmosphere, anhydrite powder, gypsum powder, gypsum, and cement. From the metallic materials tested, only chromium-nickel steel is corrosion resistant to all the media present. Zinc plated and tin plated iron sheet as well as aluminium and aluminium alloys are corrosion resistant only in the atmosphere of the tunnel, and lead plated iron sheet is resistant also in cement. Aluminium is dissolved in cement. Uncovered iron sheet undergoes severe corrosion. The non-metallic coatings tested (lacquer, stove lacquer, or synthetic resins) partially flake off already after one year's testing and are therefore not appropriate for iron sheet corrosion protection. No influence of the different media has been observed after 5 years on the 8 plastic materials tested (6 without, and 2 with glass fiber reinforcement). (author)

75 FR 22551 - United States Standards for Grades of Frozen Blueberries

Science.gov (United States)

2010-04-29

...] United States Standards for Grades of Frozen Blueberries AGENCY: Agricultural Marketing Service, USDA... United States Standards for Grades of Frozen Blueberries. After considering the comments received... . The United States Standards for Grades of Frozen Blueberries are available by accessing the AMS Web...

Seepage Analysis of Upper Gotvand Dam Concerning Gypsum Karstification (2D and 3D Approaches)

DEFF Research Database (Denmark)

Sadrekarimi, Jamshid; Kiyani, Majid; Fakhri, Behnam

2011-01-01

Upper Gotvand Dam is constructed on the Karun River at the south west of Iran. In this paper, 2D and 3D models of the dam together with the foundation and abutments were established, and several seepage analyses were carried out. Then, the gypsum veins that are scattered throughout the foundation...

77 FR 64031 - United States-Peru Trade Promotion Agreement

Science.gov (United States)

2012-10-18

... Trade Promotion Agreement AGENCIES: U.S. Customs and Border Protection, Department of Homeland Security... tariff treatment and other customs-related provisions of the United States-Peru Trade Promotion Agreement... other customs-related provisions of the United States-Peru Trade Promotion Agreement (PTPA). Please...

Effect of gypsum, pressmud, fulvic acid and zinc sources on yield and zinc uptake by rice crop in a saline-sodic soil

International Nuclear Information System (INIS)

Chand, M.

1980-01-01

The application of fulvic acid to a saline-sodic soil augmented the solubility of zinc by thousands fold. Zinc fulvate when applied at levels equivalent to that of zinc sulphate was more effective in enhancing diffusion of zinc in the soil. Application of gypsum, zinc sulphate and fulvic acid significantly increased dry matter yield and uptake of zinc by rice crop in a saline-sodic soil. Application of gypsum with pressmud or with fulvic acid and zinc sulphate resulted in significantly higher yield and zinc uptake than in other treatments. (orig.)

Inching toward incrementalism: federalism, devolution, and health policy in the United States and the United Kingdom.

Science.gov (United States)

Sparer, Michael S; France, George; Clinton, Chelsea

2011-02-01

In the United States, the recently enacted Patient Protection and Affordable Care Act of 2010 envisions a significant increase in federal oversight over the nation's health care system. At the same time, however, the legislation requires the states to play key roles in every aspect of the reform agenda (such as expanding Medicaid programs, creating insurance exchanges, and working with providers on delivery system reforms). The complicated intergovernmental partnerships that govern the nation's fragmented and decentralized system are likely to continue, albeit with greater federal oversight and control. But what about intergovernmental relations in the United Kingdom? What impact did the formal devolution of power in 1999 to Scotland, Wales, and Northern Ireland have on health policy in those nations, and in the United Kingdom more generally? Has devolution begun a political process in which health policy in the United Kingdom will, over time, become increasingly decentralized and fragmented, or will this "state of unions" retain its long-standing reputation as perhaps the most centralized of the European nations? In this article, we explore the federalist and intergovernmental implications of recent reforms in the United States and the United Kingdom, and we put forward the argument that political fragmentation (long-standing in the United States and just emerging in the United Kingdom) produces new intergovernmental partnerships that, in turn, produce incremental growth in overall government involvement in the health care arena. This is the impact of what can be called catalytic federalism.

THE UNITED STATES EDUCATIONAL SYSTEM

OpenAIRE

David Suriñach Fernández

2017-01-01

The United States educational system is very complex. Due to the fact a big number of agents take play of its regulation, the differences between the education from one State compared to the education from another, or even between school districts, might be considerable. The last two largest federal education initiatives, No Child Left Behind and Race to the Top, have had a huge impact on the American education system. The escalation of the standardized test throughout the whole country as a ...

Inflammatory potential of low doses of airborne fungi from fungal infested damp and dry gypsum boards

DEFF Research Database (Denmark)

Knudsen, Sofie Marie; Gunnarsen, Lars Bo; Madsen, Anne Mette

2017-01-01

chrysogenum. Bacillus infantis and Paenibacillus sp. were found on the gypsum boards, but not recovered in the aerosols. A significant correlation was found between the TIP of diluted and undiluted samples of fungal aerosols. However, diluted samples had a higher TIP than undiluted samples, and no significant...

Inventory of Power Plants in the United States, October 1992

Energy Technology Data Exchange (ETDEWEB)

1993-10-27

The Inventory of Power Plants in the United States is prepared annually by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), US Department of Energy (DOE). The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. Data summarized in this report are useful to a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended. The report is organized into the following chapters: Year in Review, Operable Electric Generating Units, and Projected Electric Generating Unit Additions. Statistics presented in these chapters reflect the status of electric generating units as of December 31, 1992.

78 FR 63052 - United States-Panama Trade Promotion Agreement

Science.gov (United States)

2013-10-23

...-Panama Trade Promotion Agreement AGENCY: U.S. Customs and Border Protection, Department of Homeland... Trade Promotion Agreement entered into by the United States and the Republic of Panama. DATES: Interim... and the Republic of Panama (the ``Parties'') signed the United States-Panama Trade Promotion Agreement...

Impact of Leaching Conditions on Constituents Release from Flue Gas Desulfurization Gypsum (FGDG) and FGDG-Soil Mixture

Science.gov (United States)

The interest in using Flue Gas Desulfurization Gypsum(FGDG) has increased recently. This study evaluates the leaching characteristics of trace elements in "modern" FGDG (produced after fly ash removal) and FGDG-mixed soil (SF) under different environmental conditions using rece...

United States Military in Central Asia: Beyond Operation Enduring Freedom

Science.gov (United States)

2009-10-23

Malinowski , advocacy director for Human Rights Watch, stated, “the United States is most effective in promoting liberty around the world when people...26 U.S. President, The National Security Strategy of the United States of America, page? 27 Thomas Malinowski , “Testimony

31 CFR Appendix D to Subpart A of... - United States Secret Service

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false United States Secret Service D...—United States Secret Service 1. In general. This appendix applies to the United States Secret Service. 2. Public reading room. The United States Secret Service will provide a room on an ad hoc basis when...

76 FR 68271 - To Modify the Harmonized Tariff Schedule of the United States

Science.gov (United States)

2011-11-03

... the Convention and do not run counter to the national economic interest of the United States. I have... United States obligations under the Convention and do not run counter to the national economic interest of the United States. 7. On June 6, 2003, the United States and Chile entered into the United States...

Human prion diseases in the United States.

Directory of Open Access Journals (Sweden)

Robert C Holman

Full Text Available BACKGROUND: Prion diseases are a family of rare, progressive, neurodegenerative disorders that affect humans and animals. The most common form of human prion disease, Creutzfeldt-Jakob disease (CJD, occurs worldwide. Variant CJD (vCJD, a recently emerged human prion disease, is a zoonotic foodborne disorder that occurs almost exclusively in countries with outbreaks of bovine spongiform encephalopathy. This study describes the occurrence and epidemiology of CJD and vCJD in the United States. METHODOLOGY/PRINCIPAL FINDINGS: Analysis of CJD and vCJD deaths using death certificates of US residents for 1979-2006, and those identified through other surveillance mechanisms during 1996-2008. Since CJD is invariably fatal and illness duration is usually less than one year, the CJD incidence is estimated as the death rate. During 1979 through 2006, an estimated 6,917 deaths with CJD as a cause of death were reported in the United States, an annual average of approximately 247 deaths (range 172-304 deaths. The average annual age-adjusted incidence for CJD was 0.97 per 1,000,000 persons. Most (61.8% of the CJD deaths occurred among persons >or=65 years of age for an average annual incidence of 4.8 per 1,000,000 persons in this population. Most deaths were among whites (94.6%; the age-adjusted incidence for whites was 2.7 times higher than that for blacks (1.04 and 0.40, respectively. Three patients who died since 2004 were reported with vCJD; epidemiologic evidence indicated that their infection was acquired outside of the United States. CONCLUSION/SIGNIFICANCE: Surveillance continues to show an annual CJD incidence rate of about 1 case per 1,000,000 persons and marked differences in CJD rates by age and race in the United States. Ongoing surveillance remains important for monitoring the stability of the CJD incidence rates, and detecting occurrences of vCJD and possibly other novel prion diseases in the United States.

Filler de grafito reciclado de EDM en pastas de yeso = EDM recycled graphite filler in gypsum pastes

Directory of Open Access Journals (Sweden)

Nelson Flores

2017-08-01

Full Text Available El grafito puede obtenerse de forma natural o sintética, pero este último se ha utilizado en carreteras debido a su dureza, así como en placas de cerámica fina. Se demuestran las posibilidades de la adición del polvo de grafito isostático procedente del fresado de moldes fabricados por Electroerosión de Penetración (EDM en compuestos a base de yeso. Para ello se prepararon mezclas de yeso industrial con adiciones en porcentajes diferentes de grafito EDM para evaluar las propiedades físicas y mecánicas, caracterizando previamente ambos materiales. El yeso fue sustituido por grafito en cinco fracciones diferentes, 5, 10, 15, 20 y 25%, en peso, en la preparación de las mezclas. En la designación Y-0.7G-0 y Y-0.6G-0 de las series de probetas prismáticas de 40x40x160mm, la letra Y se refiere al yeso y G significa grafito (G-0 probetas patrón sin grafito, con relaciones agua/yeso (a/y 0,7 y 0,6. Después del análisis de los resultados obtenidos, se realizó unas nuevas series con la adición de plastificante y también con mayor cantidad de grafito, 25 a 50% en peso y otras relaciones a/y basadas en su trabajabilidad, para verificar la incidencia en la resistencia a flexión y compresión. Abstract Graphite can be obtained naturally or synthetically, but the latter has been used on roads because of its hardness, as well as in thin ceramic plates. The possibilities of the addition of the isostatic graphite powder from the milling of molds made by EDM in gypsum-based compounds are demonstrated. For this purpose mixtures of industrial gypsum with additions in different percentages of EDM graphite were prepared to evaluate the physical and mechanical properties, previously characterizing both materials. The gypsum was replaced by graphite in five different fractions, 5, 10, 15, 20 and 25% by weight, in the preparation of the mixtures. In the designation Y-0.7G-0 and Y-0.6G-0 of the series of prismatic specimens of 40x40x160mm, the letter Y

Competitive Electricity Market Regulation in the United States: A Primer

Energy Technology Data Exchange (ETDEWEB)

Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tian, Tian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chernyakhovskiy, Ilya [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chernyakhovskiy, Ilya [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miller, Mackay [National Grid, Warwick (United Kingdom)

2016-12-01

The electricity system in the United States is a complex mechanism where different technologies, jurisdictions and regulatory designs interact. Today, two major models for electricity commercialization operate in the United States. One is the regulated monopoly model, in which vertically integrated electricity providers are regulated by state commissions. The other is the competitive model, in which power producers can openly access transmission infrastructure and participate in wholesale electricity markets. This paper describes the origins, evolution, and current status of the regulations that enable competitive markets in the United States.

Regional transport of a chemically distinctive dust: Gypsum from White Sands, New Mexico (USA)

Science.gov (United States)

White, Warren H.; Hyslop, Nicole P.; Trzepla, Krystyna; Yatkin, Sinan; Rarig, Randy S.; Gill, Thomas E.; Jin, Lixin

2015-03-01

The White Sands complex, a National Monument and adjoining Missile Range in southern New Mexico, occupies the dry bed of an ice-age lake where an active gypsum dunefield abuts erodible playa sediments. Aerosols entrained from White Sands are sometimes visible on satellite images as distinct, light-colored plumes crossing the Sacramento Mountains to the east and northeast. The IMPROVE network (Interagency Monitoring of PROtected Visual Environments) operates long-term aerosol samplers at two sites east of the Sacramento range. In recent years a spring pulse of sulfate aerosol has appeared at these sites, eclipsing the regional summer peak resulting from atmospheric reactions of sulfur dioxide emissions. A significant fraction of this spring sulfate is contributed by gypsum and other salts from White Sands, with much of the sulfur in coarse particles and concentrations of calcium and strontium above regional levels. The increase in these gypsiferous species coincides with a drought following a period of above-average precipitation. White Sands and the IMPROVE samplers together provide a natural laboratory: a climatically sensitive dust source that is both well characterized and chemically distinct from its surroundings, with a signature that remains identifiable at long-term observatories 100-200 km downwind.

Health, United States, 2012: Men's Health

Science.gov (United States)

... Mailing List Previous Reports Suggested Citation Related Sites Purchase Health, United States Behavioral Health Report Children’s ... with Internet Explorer may experience difficulties in directly accessing links to Excel files ...

Dengue Fever in the United States

Centers for Disease Control (CDC) Podcasts

Dr. Amesh Adalja, an associate at the Center for Biosecurity and clinical assistant professor at the University of Pittsburgh School, of Medicine, discusses dengue fever outbreaks in the United States.

15 CFR 971.209 - Processing outside the United States.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Processing outside the United States... THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Applications Contents § 971.209 Processing outside the United States. (a) Except as provided in this section...

Extension of the possibilities for disposal of the flue gas desulfurization (FGD) gypsum by the development of a process for the production of FGD gypsum. Final report. Erweiterung der Entsorgungsmoeglichkeiten von REA-Gips durch Entwicklung eines Verfahrens zur Herstellung von REA-Anhydrit aus REA-Gips. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Limmer, B.; Hueller, R.

1990-01-01

In the course of this research project a completly new transformation of FGD-gypsum into FGD-anhydrite has been studied. The reaction is catalysed by small quantities of sulphuric acid resulting in a FGD-anhydrite without combined water and with an orthorhombic crystal lattice. The course of reaction was thoroughly investigated by laboratory test and hypothesis have been put forward. The process engineering has been developed from laboratory to pilot plant scale. The FGD-anhydrite is technologically a novel product. The idea was to create it for cement industry as well as to put it on the filler market as a raw product. In principle, FGD-anhdrite will be suitable for the use in the cement industry due to its characteristics. However, it is not interesting for this market in this moment. With respect to the filler industry, this application will enable a further-reaching usability of the FGD-gypsum than the traditional scope of the gypsum industry. First experiments show that the specific properties of processed FGD-anhydrite may qualify it as a high-grade filler. (orig.) With 18 refs., 21 tabs., 41 figs.

Age and speleogenesis of epigenic gypsum caves in the northern Apennines (Italy)

Science.gov (United States)

Columbu, Andrea; Chiarini, Veronica; De Waele, Jo; Drysdale, Russell; Forti, Paolo; Hellstrom, John; Woodhead, Jon

2016-04-01

Triassic and Messinian gypsum beds host the majority of the caves in the eastern flank of the northern Apennines. To date, more than six hundreds voids have been mapped, including the longest known epigenic gypsum cave system in the world (Spipola-Acquafredda, ~11 km of tunnels) (De Waele et al., 2013). Superimposed caves are typically sub-horizontal (Klimchouk, 2000) and connected through vertical shafts, reflecting the palaeo base-level variations. When preserved, river terraces at the surface lie at the same palaeo altitude of the base level and horizontal cave passages. Notwithstanding the well-known geology of the area known (Vai and Martini, 2001), the age of these caves has been greatly underestimated in the past. Considering the rapid dissolution of the gypsum and uplifting of the area, the start of speleogenesis activity was considered to have occurred during the last glacial age. The age of karst voids can be only indirectly estimated by the dating of the infilling sediments. U-Th dating on carbonate speleothems provides high-precision and accurate ages (Hellstrom, 2003; Scholz and Hoffmann, 2008). We thus applied this methodology to 20 speleothems coming from 14 different caves belonging to the Monte Tondo, Spipola Acquafredda, Castelnuovo, Stella-Rio Basino and Brisighella systems. The results show that: i) caves were forming since at least ~300 ka; ii) the peak of speleogenesis was reached during relatively cold climate stages, when rivers formed terraces at the surface and aggradation caused paragenesis in the stable cave levels (Columbu et al., 2015). Besides the significant contribution to the understanding of the Apennines evaporite karst evolution, this study (and its further advancement) may also refine knowledge of the local vs regional uplifting rates and base-level variations since the late Pleistocene (Wegmann and Pazzaglia, 2009). References Columbu, A., De Waele, J., Forti, P., Montagna, P., Picotti, V., Pons-Branchu, E., Hellstrom, J

Obesity: A United States Strategic Imperative

Science.gov (United States)

2013-04-01

States Department of Veterans Affairs 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) Dr. Thomas ...Army Ms. Karen Malebranche United States Department of Veterans Affairs Project Adviser Dr. Thomas Williams U.S. Army War...per American has increased by 57 pounds per year ( poultry representing 46 pounds).86 Surprisingly however, the percentage of calories from meat

Cholera in the United States

Centers for Disease Control (CDC) Podcasts

2011-11-08

Anna Newton, Surveillance Epidemiologist at CDC, discusses cholera that was brought to the United States during an outbreak in Haiti and the Dominican Republic (Hispaniola).  Created: 11/8/2011 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 11/8/2011.

The United States

International Nuclear Information System (INIS)

Art, R.J.

1991-01-01

This paper reports that at least in the national security arena, the outcomes of bureaucratic infighting and domestic political struggles are not determined wholly by what goes on with the state. Rather struggles among contending groups are greatly affected by what is perceived to be happening outside the nation. Because external conditions give greater potency to some domestic forces over other, the external environment is never neutral in its domestic impact. The decisions of the period 1950-53 discussed above illustrate the point. But so too do the decisions of 1947, 1960-61 and 1969-72. In the 1947 case, Soviet intransigence provoked US nuclear rearmament. In the 1960-61 case, extended deterrent considerations pushed the United States to preserve its again newly discovered nuclear superiority. In the 1969-72 case, a Soviet determination to remain equal forced US acceptance of nuclear equality. And perhaps the best evidence of all, the perpetuation of parity ended the US inclination to resort to nuclear brinkmanship. In each instance, concerns about relative position heavily affected nuclear choice. Finally, the events of the past three years testify to the effects of international events on domestic choice. Under the terms of the 1987 INF Treaty, the two superpowers decided to dismantle and destroy an entire class of missiles of intermediate range (500-3000 kilometers) that both had deployed in Europe in the 1970s and 1980s, and in their June 1990 joint statement on strategic nuclear weapons, President Gorbachev and Brush agreed to cut the number of Soviet and US long range nuclear forces by 30 per cent. This agreement marks a watershed in US-Soviet strategic arm negotiations because for the first time the United States and the Soviet Union agreed in principals to reduce the number of weapons aimed at one another. Between 1985 and 1990 the cold war was brought to a close

Malaria Surveillance - United States, 2015.

Science.gov (United States)

Mace, Kimberly E; Arguin, Paul M; Tan, Kathrine R

2018-05-04

Malaria in humans is caused by intraerythrocytic protozoa of the genus Plasmodium. These parasites are transmitted by the bite of an infective female Anopheles species mosquito. The majority of malaria infections in the United States occur among persons who have traveled to regions with ongoing malaria transmission. However, malaria is occasionally acquired by persons who have not traveled out of the country through exposure to infected blood products, congenital transmission, laboratory exposure, or local mosquitoborne transmission. Malaria surveillance in the United States is conducted to provide information on its occurrence (e.g., temporal, geographic, and demographic), guide prevention and treatment recommendations for travelers and patients, and facilitate transmission control measures if locally acquired cases are identified. This report summarizes confirmed malaria cases in persons with onset of illness in 2015 and summarizes trends in previous years. Malaria cases diagnosed by blood film microscopy, polymerase chain reaction, or rapid diagnostic tests are reported to local and state health departments by health care providers or laboratory staff members. Case investigations are conducted by local and state health departments, and reports are transmitted to CDC through the National Malaria Surveillance System (NMSS), the National Notifiable Diseases Surveillance System (NNDSS), or direct CDC consultations. CDC reference laboratories provide diagnostic assistance and conduct antimalarial drug resistance marker testing on blood samples submitted by health care providers or local or state health departments. This report summarizes data from the integration of all NMSS and NNDSS cases, CDC reference laboratory reports, and CDC clinical consultations. CDC received reports of 1,517 confirmed malaria cases, including one congenital case, with an onset of symptoms in 2015 among persons who received their diagnoses in the United States. Although the number of

Malaria Surveillance - United States, 2014.

Science.gov (United States)

Mace, Kimberly E; Arguin, Paul M

2017-05-26

Malaria in humans is caused by intraerythrocytic protozoa of the genus Plasmodium. These parasites are transmitted by the bite of an infective female Anopheles mosquito. The majority of malaria infections in the United States occur among persons who have traveled to regions with ongoing malaria transmission. However, malaria is occasionally acquired by persons who have not traveled out of the country through exposure to infected blood products, congenital transmission, laboratory exposure, or local mosquitoborne transmission. Malaria surveillance in the United States is conducted to identify episodes of local transmission and to guide prevention recommendations for travelers. This report summarizes cases in persons with onset of illness in 2014 and trends during previous years. Malaria cases diagnosed by blood film, polymerase chain reaction, or rapid diagnostic tests are reported to local and state health departments by health care providers or laboratory staff. Case investigations are conducted by local and state health departments, and reports are transmitted to CDC through the National Malaria Surveillance System, National Notifiable Diseases Surveillance System, or direct CDC consultations. CDC conducts antimalarial drug resistance marker testing on blood samples submitted by health care providers or local or state health departments. Data from these reporting systems serve as the basis for this report. CDC received reports of 1,724 confirmed malaria cases, including one congenital case and two cryptic cases, with onset of symptoms in 2014 among persons in the United States. The number of confirmed cases in 2014 is consistent with the number of confirmed cases reported in 2013 (n = 1,741; this number has been updated from a previous publication to account for delayed reporting for persons with symptom onset occurring in late 2013). Plasmodium falciparum, P. vivax, P. ovale, and P. malariae were identified in 66.1%, 13.3%, 5.2%, and 2.7% of cases, respectively

26 CFR 1.993-7 - Definition of United States.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Definition of United States. 1.993-7 Section 1.993-7 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Domestic International Sales Corporations § 1.993-7 Definition of United States...

26 CFR 49.4261-5 - Payments made outside the United States.

Science.gov (United States)

2010-04-01

... travel under section 4262(b), the tax imposed by section 4261(b), shall not apply unless the... made outside the United States for one-way or round-trip transportation between a point within the United States and a point outside the United States. (b) Transportation between two or more points in the...

42 CFR 455.21 - Cooperation with State Medicaid fraud control units.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Cooperation with State Medicaid fraud control units... Detection and Investigation Program § 455.21 Cooperation with State Medicaid fraud control units. In a State with a Medicaid fraud control unit established and certified under subpart C of this part, (a) The...

Low birth weight in the United States.

Science.gov (United States)

Goldenberg, Robert L; Culhane, Jennifer F

2007-02-01

Pregnancy outcomes in the United States and other developed countries are considerably better than those in many developing countries. However, adverse pregnancy outcomes are generally more common in the United States than in other developed countries. Low-birth-weight infants, born after a preterm birth or secondary to intrauterine growth restriction, account for much of the increased morbidity, mortality, and cost. Wide disparities exist in both preterm birth and growth restriction among different population groups. Poor and black women, for example, have twice the preterm birth rate and higher rates of growth restriction than do most other women. Low birth weight in general is thought to place the infant at greater risk of later adult chronic medical conditions, such as diabetes, hypertension, and heart disease. Of interest, maternal thinness is a strong predictor of both preterm birth and fetal growth restriction. However, in the United States, several nutritional interventions, including high-protein diets, caloric supplementation, calcium and iron supplementation, and various other vitamin and mineral supplementations, have not generally reduced preterm birth or growth restriction. Bacterial intrauterine infections play an important role in the etiology of the earliest preterm births, but, at least to date, antibiotic treatment either before labor for risk factors such as bacterial vaginosis or during preterm labor have not consistently reduced the preterm birth rate. Most interventions have failed to reduce preterm birth or growth restriction. The substantial improvement in newborn survival in the United States over the past several decades is mostly due to better access to improved neonatal care for low-birth-weight infants.

31 CFR 594.315 - United States person; U.S. person.

Science.gov (United States)

2010-07-01

... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS General Definitions § 594.315 United States person; U.S. person. The term United States person or...

Stigma and abortion complications in the United States.

Science.gov (United States)

Harris, Lisa H

2012-12-01

Abortion is highly stigmatized in the United States and elsewhere. As a result, many women who seek or undergo abortion keep their decision a secret. In many regions of the world, stigma is a recognized contributor to maternal morbidity and mortality from unsafe abortion, even when abortion is legal. Women may self-induce abortion in ways that are dangerous, or seek unsafe clandestine abortion from inadequately trained health care providers out of fear that their sexual activity, pregnancy, or abortion will be exposed if they present to a safe, licensed facility. However, unsafe abortion rarely occurs in the United States, and accordingly, stigma as a cause of unsafe abortion in the United States context has not been described. I consider the relationship of stigma to two serious abortion complications experienced by U.S. patients. Both patients wished to keep their abortion decision a secret from family and friends, and in both cases, their inability to disclose their abortion contributed to life-threatening complications. The experiences of these patients suggest that availability of legal abortion services in the United States may not be enough to keep all women safe. The cases also challenge the rhetoric that "abortion hurts women," suggesting instead that abortion stigma hurts women.

Vanadium recycling in the United States in 2004

Science.gov (United States)

Goonan, Thomas G.

2011-01-01

As one of a series of reports that describe the recycling of metal commodities in the United States, this report discusses the flow of vanadium in the U.S. economy in 2004. This report includes a description of vanadium supply and demand in the United States and illustrates the extent of vanadium recycling and recycling trends. In 2004, apparent vanadium consumption, by end use, in the United States was 3,820 metric tons (t) in steelmaking and 232 t in manufacturing, of which 17 t was for the production of superalloys and 215 t was for the production of other alloys, cast iron, catalysts, and chemicals. Vanadium use in steel is almost entirely dissipative because recovery of vanadium from steel scrap is chemically impeded under the oxidizing conditions in steelmaking furnaces. The greatest amount of vanadium recycling is in the superalloy, other-alloy, and catalyst sectors of the vanadium market. Vanadium-bearing catalysts are associated with hydrocarbon recovery and refining in the oil industry. In 2004, 2,850 t of vanadium contained in alloy scrap and spent catalysts was recycled, which amounted to about 44 percent of U.S. domestic production. About 94 percent of vanadium use in the United States was dissipative (3,820 t in steel/4,050 t in steel+fabricated products).

The voluntary safeguards offer of the United States

International Nuclear Information System (INIS)

Houck, F.S.

1985-01-01

During negotiations of the Treaty on the Non-Proliferation of Nuclear Weapons (NPT) concerns were expressed by non-nuclear-weapon States that their acceptance of Agency safeguards would put them at a disadvantage vis-a-vis the nuclear-weapon States. To allay these concerns, the United States and the United Kingdom in December 1967 made voluntary offers to accept Agency safeguards on their peaceful nuclear activities. Subsequently, France made a voluntary offer, the safeguards agreement for which was approved by the IAEA Board of Governors in February 1978, with a view to encouraging acceptance of Agency safeguards by additional States. More recently, in February 1985 the Board approved the safeguards agreement for the voluntary offer of the USSR, made inter alia to encourage further acceptance of Agency safeguards. These safeguards agreements with nuclear-weapon-States have two important features in common: Namely, they result from voluntary offers to accept safeguards rather than from multilateral or bilateral undertakings, and they give the Agency the right but generally not an obligation to apply its safeguards. The agreements differ in certain respects, the most noteworthy of which is the scope of the nuclear activities covered by each offer. The agreements of the United States and United Kingdom are the broadest, covering all peaceful nuclear activities in each country. The safeguards agreement for the US voluntary offer has been in force since December 1980. Now is an appropriate time to review the experience with the agreement's implementation during its first four years, as well as its history and salient features

United States Navy DL Perspective

Science.gov (United States)

2010-08-10

United States Navy DL Perspective CAPT Hank Reeves Navy eLearning Project Director 10 August 2010 Report Documentation Page Form ApprovedOMB No...Marine Corps (USMC) Navy eLearning Ongoing Shared with USMC, Coast Guard 9 NeL Help Site https://ile-help.nko.navy.mil/ile/ https://s-ile

26 CFR 1.953-2 - Actual United States risks.

Science.gov (United States)

2010-04-01

... being the promotion of such sales to United States retail outlets by advertising in trade publications... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Actual United States risks. 1.953-2 Section 1.953-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX...

31 CFR 595.315 - United States person; U.S. person.

Science.gov (United States)

2010-07-01

... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM SANCTIONS REGULATIONS General Definitions § 595.315 United States person; U.S. person. The term United States person or U.S...

United States Interagency Elevation Inventory (USIEI)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The U.S. Interagency Elevation Inventory displays high-accuracy topographic and bathymetric data for the United States and its territories. The project is a...

Luminescence rigidochromism as a probe for the setting of gypsum plaster

International Nuclear Information System (INIS)

Kunkely, Horst; Vogler, Arnd

2008-01-01

The setting of gypsum plaster can be monitored by luminescence rigidochromism. The progress of the setting process which is accompanied by hardening is indicated by a blue shift of the phosphorescence of a suitable water soluble rhenium complex. This rigidity increase of the plaster/water mixture takes place in two phases. In the beginning the rigidity increase is rather large while in the second much longer phase it is relatively small. The addition of a plasticizer (or retarder) keeps the rigidity smaller in the beginning, but only slightly affects the final rigidity of the set plaster

China's international trade and air pollution in the United States.

Science.gov (United States)

Lin, Jintai; Pan, Da; Davis, Steven J; Zhang, Qiang; He, Kebin; Wang, Can; Streets, David G; Wuebbles, Donald J; Guan, Dabo

2014-02-04

China is the world's largest emitter of anthropogenic air pollutants, and measurable amounts of Chinese pollution are transported via the atmosphere to other countries, including the United States. However, a large fraction of Chinese emissions is due to manufacture of goods for foreign consumption. Here, we analyze the impacts of trade-related Chinese air pollutant emissions on the global atmospheric environment, linking an economic-emission analysis and atmospheric chemical transport modeling. We find that in 2006, 36% of anthropogenic sulfur dioxide, 27% of nitrogen oxides, 22% of carbon monoxide, and 17% of black carbon emitted in China were associated with production of goods for export. For each of these pollutants, about 21% of export-related Chinese emissions were attributed to China-to-US export. Atmospheric modeling shows that transport of the export-related Chinese pollution contributed 3-10% of annual mean surface sulfate concentrations and 0.5-1.5% of ozone over the western United States in 2006. This Chinese pollution also resulted in one extra day or more of noncompliance with the US ozone standard in 2006 over the Los Angeles area and many regions in the eastern United States. On a daily basis, the export-related Chinese pollution contributed, at a maximum, 12-24% of sulfate concentrations over the western United States. As the United States outsourced manufacturing to China, sulfate pollution in 2006 increased in the western United States but decreased in the eastern United States, reflecting the competing effect between enhanced transport of Chinese pollution and reduced US emissions. Our findings are relevant to international efforts to reduce transboundary air pollution.

Comparison of Plastic Surgery Residency Training in United States and China.

Science.gov (United States)

Zheng, Jianmin; Zhang, Boheng; Yin, Yiqing; Fang, Taolin; Wei, Ning; Lineaweaver, William C; Zhang, Feng

2015-12-01

Residency training is internationally recognized as the only way for the physicians to be qualified to practice independently. China has instituted a new residency training program for the specialty of plastic surgery. Meanwhile, plastic surgery residency training programs in the United States are presently in a transition because of restricted work hours. The purpose of this study is to compare the current characteristics of plastic surgery residency training in 2 countries. Flow path, structure, curriculum, operative experience, research, and evaluation of training in 2 countries were measured. The number of required cases was compared quantitatively whereas other aspects were compared qualitatively. Plastic surgery residency training programs in 2 countries differ regarding specific characteristics. Requirements to become a plastic surgery resident in the United States are more rigorous. Ownership structure of the regulatory agency for residency training in 2 countries is diverse. Training duration in the United States is more flexible. Clinical and research training is more practical and the method of evaluation of residency training is more reasonable in the United States. The job opportunities after residency differ substantially between 2 countries. Not every resident has a chance to be an independent surgeon and would require much more training time in China than it does in the United States. Plastic surgery residency training programs in the United States and China have their unique characteristics. The training programs in the United States are more standardized. Both the United States and China may complement each other to create training programs that will ultimately provide high-quality care for all people.

Composting of waste paint sludge containing melamine resin as affected by nutrients and gypsum addition and microbial inoculation

International Nuclear Information System (INIS)

Tian Yongqiang; Chen Liming; Gao Lihong; Michel, Frederick C.; Wan Caixia; Li Yebo; Dick, Warren A.

2012-01-01

Melamine formaldehyde resins have hard and durable properties and are found in many products, including automobile paints. These resins contain high concentrations of nitrogen and, if properly composted, can yield valuable products. We evaluated the effects of starter compost, nutrients, gypsum and microbial inoculation on composting of paint sludge containing melamine resin. A bench-scale composting experiment was conducted at 55 °C for 91 days and then at 30 °C for an additional 56 days. After 91 days, the composts were inoculated with a mixed population of melamine-degrading microorganisms. Melamine resin degradation after the entire 147 days of composting varied between 73 and 95% for the treatments with inoculation of microorganisms compared to 55–74% for the treatments without inoculation. Degradation was also enhanced by nutrients and gypsum additions. Our results infer that large scale composting of melamine resins in paint sludge is possible. - Highlights: ► Melamine resin in waste paint sludges could be efficiently composted at bench scale. ► Melamine resin degradation after 147 days of composting was 73–95% complete. ► Nutrients, gypsum and melamine-degrading microorganisms increased composting rate. ► Melamine degradation products first increased and then decreased in the compost. ► Final compost was enriched in nitrogen and other essential plant nutrients. - Melamine resin in waste paint sludges was efficiently composted at bench scale, with finished composts having low levels of heavy metals and enriched in plant nutrients.

19 CFR 10.46 - Articles for the United States.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Articles for the United States. 10.46 Section 10... THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Articles for Institutions § 10.46 Articles for the United States. Pursuant to subheadings 9808.00.10 and 9808...

26 CFR 1.864-2 - Trade or business within the United States.

Science.gov (United States)

2010-04-01

... States, as his agent to effect transactions in the United States in stocks and securities for the account... A ordinarily effects transactions in the United States in stocks or securities. Under the agency..., effects transactions in the United States in stocks or securities for the partnership's own account or...

Optically stimulated luminescence dosimetry with gypsum wallboard (drywall)

International Nuclear Information System (INIS)

Thompson, J. W.; Burdette, K. E.; Inrig, E. L.; Dewitt, R.; Mistry, R.; Rink, W. J.; Boreham, D. R.

2010-01-01

Gypsum wallboard (drywall) represents an attractive target for retrospective dosimetry by optically stimulated luminescence (OSL) in the event of a radiological accident or malicious use of nuclear material. In this study, wallboard is shown to display a radiation-induced luminescence signal (RIS) as well as a natural background signal (NS), which is comparable in intensity to the RIS. Excitation and emission spectra show that maximum luminescence intensity is obtained for stimulation with blue light-emitting diodes (470 nm) and for detection in the ultraviolet region (290-370 nm). It is necessary to decrease the optical stimulation power dramatically in order to adequately separate the RIS from the interfering background signal. The necessary protocols are developed for accurately measuring the absorbed dose as low as 500 mGy and demonstrate that the RIS decays logarithmically with storage time, with complete erasure expected within 1-4 d. (authors)

Taxation of United States general aviation

Science.gov (United States)

Sobieralski, Joseph Bernard

General aviation in the United States has been an important part of the economy and American life. General aviation is defined as all flying excluding military and scheduled airline operations, and is utilized in many areas of our society. The majority of aircraft operations and airports in the United States are categorized as general aviation, and general aviation contributes more than one percent to the United States gross domestic product each year. Despite the many benefits of general aviation, the lead emissions from aviation gasoline consumption are of great concern. General aviation emits over half the lead emissions in the United States or over 630 tons in 2005. The other significant negative externality attributed to general aviation usage is aircraft accidents. General aviation accidents have caused over 8000 fatalities over the period 1994-2006. A recent Federal Aviation Administration proposed increase in the aviation gasoline tax from 19.4 to 70.1 cents per gallon has renewed interest in better understanding the implications of such a tax increase as well as the possible optimal rate of taxation. Few studies have examined aviation fuel elasticities and all have failed to study general aviation fuel elasticities. Chapter one fills that gap and examines the elasticity of aviation gasoline consumption in United States general aviation. Utilizing aggregate time series and dynamic panel data, the price and income elasticities of demand are estimated. The price elasticity of demand for aviation gasoline is estimated to range from -0.093 to -0.185 in the short-run and from -0.132 to -0.303 in the long-run. These results prove to be similar in magnitude to automobile gasoline elasticities and therefore tax policies could more closely mirror those of automobile tax policies. The second chapter examines the costs associated with general aviation accidents. Given the large number of general aviation operations as well as the large number of fatalities and

Analysis of United States' Broadband Policy

National Research Council Canada - National Science Library

Uzarski, Joel S

2007-01-01

.... With every month that passes, the United States fails to close the gap in the digital divide both inside its borders as well as among the other countries that lead the world in broadband penetration...

DIVERSITY OF THE TYPE 1 INTRON-ITS REGION OF THE 18S rRNA GENE IN PSEUDOGYMNOASCUS SPECIES FROM THE RED HILLS OF KANSAS.

Science.gov (United States)

Chen, Xi; Crupper, Scott S

2016-09-01

Gypsum caves found throughout the Red Hills of Kansas have the state's most diverse and largest population of cave-roosting bats. White-nose syndrome (WNS), a disease caused by the fungus Pseudogymnoascus destructans, which threatens all temperate bat species, has not been previously detected in the gypsum caves as this disease moves westward from the eastern United States. Cave soil was obtained from the gypsum caves, and using the polymerase chain reaction, a 624-nucleotide DNA fragment specific to the Type 1 intron-internal transcribed spacer region of the 18S rRNA gene from Pseudogymnoascus species was amplified. Subsequent cloning and DNA sequencing indicated P. destructans DNA was present, along with 26 uncharacterized Pseudogymnoascus DNA variants. However, no evidence of WNS was observed in bat populations residing in these caves.

Reciclado de placas de yeso laminado aligeradas con residuos de poliuretano = Recycling of gypsum plasterboard lightened with polyurethane waste

Directory of Open Access Journals (Sweden)

Lourdes Alameda

2015-05-01

Full Text Available Este trabajo presenta los resultados de un proceso experimental de reutilización de residuos obtenidos de desechos de placas de yeso laminado elaboradas con residuos poliméricos de origen industrial (espuma de poliuretano y reforzadas con fibras de polipropileno, para la fabricación de nuevas placas de yeso laminado. Para ello, se expone la metodología de reciclado de placas prefabricadas buscando de esta forma aumentar el ciclo de vida del yeso y de los residuos de poliuretano empleados. Para ello se detalla el proceso de fabricación las nuevas placas así como su caracterización mediante ensayos físicos y mecánicos a través de ensayos normalizados para placas de yeso laminado (densidad aparente, resistencia a flexión, absorción total en agua y dureza superficial. Los resultados obtenidos indican que es posible reciclar este tipo de prefabricados de una manera sencilla. De la misma forma se ha demostrado que las nuevas placas fabricadas con el residuo recuperado, presentan un buen comportamiento mecánico, a la par que se reduce su capacidad de absorción de agua y se aumenta su dureza su superficial. Abstract This paper presents the results of an experimental process of reusing waste obtained from waste gypsum plasterboard made from polymeric industrial waste (polyurethane foam and polypropylene fibers whit the aim to manufacturer new gypsum plasterboards. Therefore, a methodology to recycle is presented to increase the life cycle of waste gypsum. The manufacturing process of the plates is detailed as well as their physical and mechanical characterization by means of standardized for gypsum plasterboard (bulk density, flexion strength, total water absorption and surface hardness. The results indicate that it is possible to recycle this type of prefabricated in a simple way. Likewise it has been demonstrated that new plates made with the residue reusing, have good mechanical strength, at the same time reduce the capacity of water

Anti-Terrorism Authority Under the Laws of the United Kingdom and the United States

National Research Council Canada - National Science Library

Feikert, Clare; Doyle, Charles

2006-01-01

This is a comparison of the laws of the United Kingdom and of the United States that govern criminal and intelligence investigations of terrorist activities Both systems rely upon a series of statutory authorizations...

76 FR 38700 - United States, et al.

Science.gov (United States)

2011-07-01

... prices in advertisements, in-store displays, and online. Consumer World believes these rules should be... has ruled on that motion. I. Procedural History The United States and seven Plaintiff States filed the... Restraints result in higher merchant costs, and merchants generally pass costs on to consumers, retail prices...

Self-disinfecting Alginate vs Conventional Alginate: Effect on Surface Hardness of Gypsum Cast-An in vitro Study.

Science.gov (United States)

Madhavan, Ranjith; George, Navia; Thummala, Niharika R; Ravi, S V; Nagpal, Ajay

2017-11-01

For the construction of any dental prosthesis, accurate impressions are necessary. Hence, we undertook the present study to evaluate and compare the surface hardness of gypsum casts poured from impressions made using conventional alginate and self-disinfecting alginate. A total of 30 impressions of stainless steel die were made, out of which 15 impressions were made with conventional alginate and 15 were made with self-disinfecting alginate and poured using Type III dental stone. Thirty stone specimens were subjected for hardness testing. Data were analyzed using independent samples t-test to compare the mean surface hardness. Difference in surface hardness was statistically insignificant (p > 0.05). Surface hardness of gypsum casts poured using impressions made from self-disinfecting alginate and conventional alginates were comparable. Self-disinfecting alginates may be employed in clinical practice as safe and effective materials to overcome the infection control issues without compromising on the properties of the material.

75 FR 10561 - Pricing for 2010 United States Mint America the Beautiful QuartersTM

Science.gov (United States)

2010-03-08

... DEPARTMENT OF THE TREASURY United States Mint Pricing for 2010 United States Mint America the Beautiful Quarters\\TM\\ Two-Roll Set, etc. AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of the 2010 United States Mint America...

Influence of Curing Humidity on the Compressive Strength of Gypsum-Cemented Similar Materials

Directory of Open Access Journals (Sweden)

Weiming Guan

2016-01-01

Full Text Available The analogous simulation experiment is widely used in geotechnical and mining engineering. However, systematic errors derived from unified standard curing procedure have been underestimated to some extent. In this study, 140 gypsum-cemented similar material specimens were chosen to study their curing procedure with different relative humidity, which is 10%–15%, 40%, 60%, and 80%, respectively. SEM microstructures and XRD spectra were adopted to detect the correlation between microstructures and macroscopic mechanical strength during curing. Our results indicated that the needle-like phases of similar materials began to develop in the early stage of the hydration process through intersecting with each other and eventually transformed into mat-like phases. Increase of humidity may inhibit the development of needle-like phases; thus the compressive strength changes more smoothly, and the time required for the material strength to reach the peak value will be prolonged. The peak strength decreases along with the increase of humidity while the humidity is higher than 40%; however, the reverse tendency was observed if the humidity was lower than 40%. Finally, we noticed that the material strength usually reaches the peak value when the water content continuously reduces and tends towards stability. Based on the above observation, a curing method determination model and experimental strength predication method for gypsum-cemented similar materials were proposed.

78 FR 77103 - United States Travel and Tourism Advisory Board

Science.gov (United States)

2013-12-20

... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism... extended deadline for application for membership on the United States Travel and Tourism Advisory Board... Travel and Tourism Advisory Board (Board). The November 25, 2013 notice provided that all applications...

State of pine decline in the southeastern United States

Science.gov (United States)

Lori Eckhardt; Mary Anne Sword Sayer; Don Imm

2010-01-01

Pine decline is an emerging forest health issue in the southeastern United States. Observations suggest pine decline is caused by environmental stress arising from competition, weather, insects and fungi, anthropogenic disturbances, and previous management. The problem is most severe for loblolly pine on sites that historically supported longleaf pine, are highly...

78 FR 53426 - United States Travel and Tourism Advisory Board Charter Renewal

Science.gov (United States)

2013-08-29

... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism... for the United States Travel and Tourism Advisory Board on August 19, 2013. DATES: The Charter for the United States Travel and Tourism Advisory Board was renewed on August 19, 2013. FOR FURTHER INFORMATION...

Summary of Notifiable Diseases, United States. Volume 45, Number 53.

Science.gov (United States)

1997-10-31

Trichinosis Tuberculosis Typhoid fever Yellow fever NOTE: Although varicella is not a nationally notifiable disease, the Council of State and...plague among humans, two of which were fatal, were re- ported in the United States (two cases in Arizona, one in Colorado, and two in New Mexico ). Both...13 cases per year) were reported in the United States. Of these cases, 80% occurred in the southwestern states of New Mexico , Arizona, and