WorldWideScience

Sample records for unit form dihedral

  1. Dihedral flavor symmetries

    Energy Technology Data Exchange (ETDEWEB)

    Blum, Alexander Simon

    2009-06-10

    This thesis deals with the possibility of describing the flavor sector of the Standard Model of Particle Physics (with neutrino masses), that is the fermion masses and mixing matrices, with a discrete, non-abelian flavor symmetry. In particular, mass independent textures are considered, where one or several of the mixing angles are determined by group theory alone and are independent of the fermion masses. To this end a systematic analysis of a large class of discrete symmetries, the dihedral groups, is analyzed. Mass independent textures originating from such symmetries are described and it is shown that such structures arise naturally from the minimization of scalar potentials, where the scalars are gauge singlet flavons transforming non-trivially only under the flavor group. Two models are constructed from this input, one describing leptons, based on the group D{sub 4}, the other describing quarks and employing the symmetry D{sub 14}. In the latter model it is the quark mixing matrix element V{sub ud} - basically the Cabibbo angle - which is at leading order predicted from group theory. Finally, discrete flavor groups are discussed as subgroups of a continuous gauge symmetry and it is shown that this implies that the original gauge symmetry is broken by fairly large representations. (orig.)

  2. Dihedral flavor symmetries

    International Nuclear Information System (INIS)

    Blum, Alexander Simon

    2009-01-01

    This thesis deals with the possibility of describing the flavor sector of the Standard Model of Particle Physics (with neutrino masses), that is the fermion masses and mixing matrices, with a discrete, non-abelian flavor symmetry. In particular, mass independent textures are considered, where one or several of the mixing angles are determined by group theory alone and are independent of the fermion masses. To this end a systematic analysis of a large class of discrete symmetries, the dihedral groups, is analyzed. Mass independent textures originating from such symmetries are described and it is shown that such structures arise naturally from the minimization of scalar potentials, where the scalars are gauge singlet flavons transforming non-trivially only under the flavor group. Two models are constructed from this input, one describing leptons, based on the group D 4 , the other describing quarks and employing the symmetry D 14 . In the latter model it is the quark mixing matrix element V ud - basically the Cabibbo angle - which is at leading order predicted from group theory. Finally, discrete flavor groups are discussed as subgroups of a continuous gauge symmetry and it is shown that this implies that the original gauge symmetry is broken by fairly large representations. (orig.)

  3. Automorphic Lie algebras with dihedral symmetry

    International Nuclear Information System (INIS)

    Knibbeler, V; Lombardo, S; A Sanders, J

    2014-01-01

    The concept of automorphic Lie algebras arises in the context of reduction groups introduced in the early 1980s in the field of integrable systems. automorphic Lie algebras are obtained by imposing a discrete group symmetry on a current algebra of Krichever–Novikov type. Past work shows remarkable uniformity between algebras associated to different reduction groups. For example, if the base Lie algebra is sl 2 (C) and the poles of the automorphic Lie algebra are restricted to an exceptional orbit of the symmetry group, changing the reduction group does not affect the Lie algebra structure. In this research we fix the reduction group to be the dihedral group and vary the orbit of poles as well as the group action on the base Lie algebra. We find a uniform description of automorphic Lie algebras with dihedral symmetry, valid for poles at exceptional and generic orbits. (paper)

  4. Teaching Molecular Symmetry of Dihedral Point Groups by Drawing Useful 2D Projections

    Science.gov (United States)

    Chen, Lan; Sun, Hongwei; Lai, Chengming

    2015-01-01

    There are two main difficulties in studying molecular symmetry of dihedral point groups. One is locating the C[subscript 2] axes perpendicular to the C[subscript n] axis, while the other is finding the s[subscript]d planes which pass through the C[subscript n] axis and bisect the angles formed by adjacent C[subscript 2] axes. In this paper, a…

  5. Integral pentavalent Cayley graphs on abelian or dihedral groups

    Indian Academy of Sciences (India)

    MOHSEN GHASEMI

    ghasemi@urmia.ac.ir. MS received 8 July 2015; revised 10 July 2016. Abstract. A graph is called integral, if all of its eigenvalues are integers. In this paper, we give some results about integral pentavalent Cayley graphs on abelian or dihedral.

  6. A fast and accurate dihedral interpolation loop subdivision scheme

    Science.gov (United States)

    Shi, Zhuo; An, Yalei; Wang, Zhongshuai; Yu, Ke; Zhong, Si; Lan, Rushi; Luo, Xiaonan

    2018-04-01

    In this paper, we propose a fast and accurate dihedral interpolation Loop subdivision scheme for subdivision surfaces based on triangular meshes. In order to solve the problem of surface shrinkage, we keep the limit condition unchanged, which is important. Extraordinary vertices are handled using modified Butterfly rules. Subdivision schemes are computationally costly as the number of faces grows exponentially at higher levels of subdivision. To address this problem, our approach is to use local surface information to adaptively refine the model. This is achieved simply by changing the threshold value of the dihedral angle parameter, i.e., the angle between the normals of a triangular face and its adjacent faces. We then demonstrate the effectiveness of the proposed method for various 3D graphic triangular meshes, and extensive experimental results show that it can match or exceed the expected results at lower computational cost.

  7. Registration of Images with N-fold Dihedral Blur

    Czech Academy of Sciences Publication Activity Database

    Pedone, M.; Flusser, Jan; Heikkila, J.

    2015-01-01

    Roč. 24, č. 3 (2015), s. 1036-1045 ISSN 1057-7149 R&D Projects: GA ČR GA13-29225S; GA ČR GA15-16928S Institutional support: RVO:67985556 Keywords : Image registration * blurred images * N-fold rotational symmetry * dihedral symmetry * phase correlation Subject RIV: JD - Computer Applications, Robotics Impact factor: 3.735, year: 2015 http://library.utia.cas.cz/separaty/2015/ZOI/flusser-0441247.pdf

  8. Design and Polarization Characteristics Analysis of Dihedral Based on Salisbury Screen

    Directory of Open Access Journals (Sweden)

    Zhang Ran

    2016-12-01

    Full Text Available Salisbury screens have a number of unique electromagnetic scattering characteristics. When appropriately designed, the Salisbury screen can reach the radar target signature transform. Based on the electromagnetic scattering characteristics of the Salisbury screen, we designed a novel dihedral corner, and theoretically analyzed and simulated its electromagnetic scattering characteristics in this study. The results reveal the monostatic radar cross section curves of the 90°and 60° Salisbury screen dihedral and metal dihedral, respectively. Taking an orthogonal dihedral corner as an example, we obtained the polarization scattering matrixes for different incident degrees. In addition, we investigated the influence of illumination frequency, target gestures, and other key factors on the polarization characteristics of the Salisbury screen dihedral corner. The theoretical and simulation analysis results show that compared with the conventional metal dihedral corner, the Salisbury screen dihedral corner significantly influences the scattering characteristics and will have potential application in electronic warfare.

  9. Predicting dihedral angle probability distributions for protein coil residues from primary sequence using neural networks

    DEFF Research Database (Denmark)

    Helles, Glennie; Fonseca, Rasmus

    2009-01-01

    residue in the input-window. The trained neural network shows a significant improvement (4-68%) in predicting the most probable bin (covering a 30°×30° area of the dihedral angle space) for all amino acids in the data set compared to first order statistics. An accuracy comparable to that of secondary...... seem to have a significant influence on the dihedral angles adopted by the individual amino acids in coil segments. In this work we attempt to predict a probability distribution of these dihedral angles based on the flanking residues. While attempts to predict dihedral angles of coil segments have been...... done previously, none have, to our knowledge, presented comparable results for the probability distribution of dihedral angles. Results: In this paper we develop an artificial neural network that uses an input-window of amino acids to predict a dihedral angle probability distribution for the middle...

  10. Disequilibrium dihedral angles in layered intrusions: the microstructural record of fractionation

    Science.gov (United States)

    Holness, Marian; Namur, Olivier; Cawthorn, Grant

    2013-04-01

    The dihedral angle formed at junctions between two plagioclase grains and a grain of augite is only rarely in textural equilibrium in gabbros from km-scale crustal layered intrusions. The median of a population of these disequilibrium angles, Θcpp, varies systematically within individual layered intrusions, remaining constant over large stretches of stratigraphy with significant increases or decreases associated with the addition or reduction respectively of the number of phases on the liquidus of the bulk magma. The step-wise changes in Θcpp are present in Upper Zone of the Bushveld Complex, the Megacyclic Unit I of the Sept Iles Intrusion, and the Layered Series of the Skaergaard Intrusion. The plagioclase-bearing cumulates of Rum have a bimodal distribution of Θcpp, dependent on whether the cumulus assemblage includes clinopyroxene. The presence of the step-wise changes is independent of the order of arrival of cumulus phases and of the composition of either the cumulus phases or the interstitial liquid inferred to be present in the crystal mush. Step-wise changes in the rate of change in enthalpy with temperature (ΔH) of the cooling and crystallizing magma correspond to the observed variation of Θcpp, with increases of both ΔH and Θcpp associated with the addition of another liquidus phase, and decreases of both associated with the removal of a liquidus phase. The replacement of one phase by another (e.g. olivine ⇔ orthpyroxene) has little effect on ΔH and no discernible effect on Θcpp. An increase of ΔH is manifest by an increase in the fraction of the total enthalpy budget that is the latent heat of crystallization (the fractional latent heat). It also results in an increase in the amount crystallized in each incremental temperature drop (the crystal productivity). An increased fractional latent heat and crystal productivity result in an increased rate of plagioclase growth compared to that of augite during the final stages of solidification

  11. Freeman-Durden Decomposition with Oriented Dihedral Scattering

    Directory of Open Access Journals (Sweden)

    Yan Jian

    2014-10-01

    Full Text Available In this paper, when the azimuth direction of polarimetric Synthetic Aperature Radars (SAR differs from the planting direction of crops, the double bounce of the incident electromagnetic waves from the terrain surface to the growing crops is investigated and compared with the normal double bounce. Oriented dihedral scattering model is developed to explain the investigated double bounce and is introduced into the Freeman-Durden decomposition. The decomposition algorithm corresponding to the improved decomposition is then proposed. The airborne polarimetric SAR data for agricultural land covering two flight tracks are chosen to validate the algorithm; the decomposition results show that for agricultural vegetated land, the improved Freeman-Durden decomposition has the advantage of increasing the decomposition coherency among the polarimetric SAR data along the different flight tracks.

  12. Terrestrial Ecosystems - Land Surface Forms of the Conterminous United States

    Science.gov (United States)

    Cress, Jill J.; Sayre, Roger G.; Comer, Patrick; Warner, Harumi

    2009-01-01

    As part of an effort to map terrestrial ecosystems, the U.S. Geological Survey has generated land surface form classes to be used in creating maps depicting standardized, terrestrial ecosystem models for the conterminous United States, using an ecosystems classification developed by NatureServe . A biophysical stratification approach, developed for South America and now being implemented globally, was used to model the ecosystem distributions. Since land surface forms strongly influence the differentiation and distribution of terrestrial ecosystems, they are one of the key input layers in this biophysical stratification. After extensive investigation into various land surface form mapping methodologies, the decision was made to use the methodology developed by the Missouri Resource Assessment Partnership (MoRAP). MoRAP made modifications to Hammond's land surface form classification, which allowed the use of 30-meter source data and a 1-km2 window for analyzing the data cell and its surrounding cells (neighborhood analysis). While Hammond's methodology was based on three topographic variables, slope, local relief, and profile type, MoRAP's methodology uses only slope and local relief. Using the MoRAP method, slope is classified as gently sloping when more than 50 percent of the area in a 1-km2 neighborhood has slope less than 8 percent, otherwise the area is considered moderately sloping. Local relief, which is the difference between the maximum and minimum elevation in a neighborhood, is classified into five groups: 0-15 m, 16-30 m, 31-90 m, 91-150 m, and >150 m. The land surface form classes are derived by combining slope and local relief to create eight landform classes: flat plains (gently sloping and local relief = 90 m), low hills (not gently sloping and local relief = 150 m). However, in the USGS application of the MoRAP methodology, an additional local relief group was used (> 400 m) to capture additional local topographic variation. As a result, low

  13. Accurate Analysis of Target Characteristic in Bistatic SAR Images: A Dihedral Corner Reflectors Case.

    Science.gov (United States)

    Ao, Dongyang; Li, Yuanhao; Hu, Cheng; Tian, Weiming

    2017-12-22

    The dihedral corner reflectors are the basic geometric structure of many targets and are the main contributions of radar cross section (RCS) in the synthetic aperture radar (SAR) images. In stealth technologies, the elaborate design of the dihedral corners with different opening angles is a useful approach to reduce the high RCS generated by multiple reflections. As bistatic synthetic aperture sensors have flexible geometric configurations and are sensitive to the dihedral corners with different opening angles, they specially fit for the stealth target detections. In this paper, the scattering characteristic of dihedral corner reflectors is accurately analyzed in bistatic synthetic aperture images. The variation of RCS with the changing opening angle is formulated and the method to design a proper bistatic radar for maximizing the detection capability is provided. Both the results of the theoretical analysis and the experiments show the bistatic SAR could detect the dihedral corners, under a certain bistatic angle which is related to the geometry of target structures.

  14. Development of solid radionuclide waste forms in the United States

    International Nuclear Information System (INIS)

    Crandall, J.L.

    1979-01-01

    New ways of reworking the wastes require a new classification in terms of the final waste forms. This paper surveys the candidate forms: encapsulation binders, in-place solidification waste forms, glass and ceramic waste forms, mineral waste forms, matrix waste forms, gaseous waste forms (fixation), and canisters and engineered barriers. Participants in the US-high-level waste form development program are listed. Requirements and selection of waste forms are also discussed. 26 references

  15. Accurate Analysis of Target Characteristic in Bistatic SAR Images: A Dihedral Corner Reflectors Case

    Directory of Open Access Journals (Sweden)

    Dongyang Ao

    2017-12-01

    Full Text Available The dihedral corner reflectors are the basic geometric structure of many targets and are the main contributions of radar cross section (RCS in the synthetic aperture radar (SAR images. In stealth technologies, the elaborate design of the dihedral corners with different opening angles is a useful approach to reduce the high RCS generated by multiple reflections. As bistatic synthetic aperture sensors have flexible geometric configurations and are sensitive to the dihedral corners with different opening angles, they specially fit for the stealth target detections. In this paper, the scattering characteristic of dihedral corner reflectors is accurately analyzed in bistatic synthetic aperture images. The variation of RCS with the changing opening angle is formulated and the method to design a proper bistatic radar for maximizing the detection capability is provided. Both the results of the theoretical analysis and the experiments show the bistatic SAR could detect the dihedral corners, under a certain bistatic angle which is related to the geometry of target structures.

  16. Accurate Analysis of Target Characteristic in Bistatic SAR Images: A Dihedral Corner Reflectors Case

    Science.gov (United States)

    Ao, Dongyang; Hu, Cheng; Tian, Weiming

    2017-01-01

    The dihedral corner reflectors are the basic geometric structure of many targets and are the main contributions of radar cross section (RCS) in the synthetic aperture radar (SAR) images. In stealth technologies, the elaborate design of the dihedral corners with different opening angles is a useful approach to reduce the high RCS generated by multiple reflections. As bistatic synthetic aperture sensors have flexible geometric configurations and are sensitive to the dihedral corners with different opening angles, they specially fit for the stealth target detections. In this paper, the scattering characteristic of dihedral corner reflectors is accurately analyzed in bistatic synthetic aperture images. The variation of RCS with the changing opening angle is formulated and the method to design a proper bistatic radar for maximizing the detection capability is provided. Both the results of the theoretical analysis and the experiments show the bistatic SAR could detect the dihedral corners, under a certain bistatic angle which is related to the geometry of target structures. PMID:29271917

  17. Prediction of backbone dihedral angles and protein secondary structure using support vector machines

    Directory of Open Access Journals (Sweden)

    Hirst Jonathan D

    2009-12-01

    Full Text Available Abstract Background The prediction of the secondary structure of a protein is a critical step in the prediction of its tertiary structure and, potentially, its function. Moreover, the backbone dihedral angles, highly correlated with secondary structures, provide crucial information about the local three-dimensional structure. Results We predict independently both the secondary structure and the backbone dihedral angles and combine the results in a loop to enhance each prediction reciprocally. Support vector machines, a state-of-the-art supervised classification technique, achieve secondary structure predictive accuracy of 80% on a non-redundant set of 513 proteins, significantly higher than other methods on the same dataset. The dihedral angle space is divided into a number of regions using two unsupervised clustering techniques in order to predict the region in which a new residue belongs. The performance of our method is comparable to, and in some cases more accurate than, other multi-class dihedral prediction methods. Conclusions We have created an accurate predictor of backbone dihedral angles and secondary structure. Our method, called DISSPred, is available online at http://comp.chem.nottingham.ac.uk/disspred/.

  18. Female Participation in Formed Police Units: A Report on the Integration of Women in Formed Police Units of Peacekeeping Operations

    Science.gov (United States)

    2012-09-01

    of Peacekeeping Operations in accor- dance with the principles of United Nations (UN) Res- olution 1325. To address this topic the study (1) briefly...that the eligibility criteria was revised to include women who played support roles to the combatants, as cooks, por- ters, sex slaves or spies

  19. The covariant formulation of Maxwell's equations expressed in a form independent of specific units

    International Nuclear Information System (INIS)

    Heras, Jose A; Baez, G

    2009-01-01

    The covariant formulation of Maxwell's equations can be expressed in a form independent of the usual systems of units by introducing the constants α, β and γ into these equations. Maxwell's equations involving these constants are then specialized to the most commonly used systems of units: Gaussian, SI and Heaviside-Lorentz by giving the constants α, β and γ the values appropriate to each system

  20. Effect of Fluoride Mouthrinse and Toothpaste on Number of Streptococcal Colony Forming Units of Dental Plaque

    Directory of Open Access Journals (Sweden)

    SE Jabbarifar

    2005-11-01

    Full Text Available Background: Frequent topical fluoride therapy through toothpaste, mouthrinse, professional gels and solutions causes decrease in incidence, pause and repair of dental caries in the enamel. These mechanisms are done through penetration of fluoride ions (F- and their replacement with hydroxyl ions (OH- of hydroxyappatite of enamel, interfere with microbial metabolism of dental plaque and bacteriostatic effect on some cariogenic bacterial strains such as streptococci. The aim of this study was to examine the effect of fluoride mouthrinse and toothpaste on the number of streptococcal colony forming units of dental plaque. Methods: 62 children with 6-7 years old were put in two groups. Samples of dental plaque from each group were collected both before and after use of the fluoride mouthrinse and or toothpaste. The samples were cultured on blood agar to find the number of streptococcal colony forming units (CFU. The mean colony forming unit was compared inter and intra groups before and after application of Fluoride products. Results: The streptococcal CFU of dental plaque before and after use of the mouthrinse and toothpaste respectively was (1240±1367, 1253±1341.5 and (551±716, 898±1151. Statistically, the streptococcal CFU in each group before and after use of the toothpaste and mouthrinse was significantly different. Conclusion: The findings of this study indicated that the fluoride toothpaste and mouthrinse reduce number of streptococcal colony forming units of dental plaque. Also this reduction was not depended on level of (F- Ions, sort of vehicle of fluoride and frequent application of the fluoride mouthrinse and toothpaste. Keywords: fluoride mouthrinse, fluoride toothpaste, colony forming unit (CFU, streptococcus

  1. Modeling Bottom-Up Visual Attention Using Dihedral Group D4 §

    Directory of Open Access Journals (Sweden)

    Puneet Sharma

    2016-08-01

    Full Text Available In this paper, first, we briefly describe the dihedral group D 4 that serves as the basis for calculating saliency in our proposed model. Second, our saliency model makes two major changes in a latest state-of-the-art model known as group-based asymmetry. First, based on the properties of the dihedral group D 4 , we simplify the asymmetry calculations associated with the measurement of saliency. This results is an algorithm that reduces the number of calculations by at least half that makes it the fastest among the six best algorithms used in this research article. Second, in order to maximize the information across different chromatic and multi-resolution features, the color image space is de-correlated. We evaluate our algorithm against 10 state-of-the-art saliency models. Our results show that by using optimal parameters for a given dataset, our proposed model can outperform the best saliency algorithm in the literature. However, as the differences among the (few best saliency models are small, we would like to suggest that our proposed model is among the best and the fastest among the best. Finally, as a part of future work, we suggest that our proposed approach on saliency can be extended to include three-dimensional image data.

  2. Predicting beta-turns and their types using predicted backbone dihedral angles and secondary structures.

    Science.gov (United States)

    Kountouris, Petros; Hirst, Jonathan D

    2010-07-31

    Beta-turns are secondary structure elements usually classified as coil. Their prediction is important, because of their role in protein folding and their frequent occurrence in protein chains. We have developed a novel method that predicts beta-turns and their types using information from multiple sequence alignments, predicted secondary structures and, for the first time, predicted dihedral angles. Our method uses support vector machines, a supervised classification technique, and is trained and tested on three established datasets of 426, 547 and 823 protein chains. We achieve a Matthews correlation coefficient of up to 0.49, when predicting the location of beta-turns, the highest reported value to date. Moreover, the additional dihedral information improves the prediction of beta-turn types I, II, IV, VIII and "non-specific", achieving correlation coefficients up to 0.39, 0.33, 0.27, 0.14 and 0.38, respectively. Our results are more accurate than other methods. We have created an accurate predictor of beta-turns and their types. Our method, called DEBT, is available online at http://comp.chem.nottingham.ac.uk/debt/.

  3. A short form of the neonatal intensive care unit family needs inventory

    Directory of Open Access Journals (Sweden)

    Elisabete Alves

    2016-02-01

    Full Text Available ABSTRACT OBJECTIVE: The identification of parental needs in Neonatal Intensive Care Units is essential to design and implement family-centered care. This article aims to validate the Neonatal Intensive Care Units Family Needs Inventory for the Portuguese population, and to propose a Short Form. METHODS: A linguistic adaptation of the Neonatal Intensive Care Units Family Needs Inventory, a self-report scale with 56-items, was performed. The instrument was administered to 211 parents of infants hospitalized in all level III Neonatal Intensive Care Units in the North of Portugal, 15-22 days after admission (July of 2013-June of 2014. The number of items needed to achieve reliability close to 0.8 was calculated using by the Spearman-Brown formula. The global goodness of fit of the scale was evaluated using the comparative fit index. Construct validity was assessed through association of each dimension score with socio-demographic and obstetric characteristics. RESULTS: Exploratory factor analysis revealed two dimensions, one focused on parents' needs and another on the infant's needs. To compose the Short Form Inventory, items with ceiling effect were eliminated and 22 items were submitted to confirmatory analysis, which supported the existence of two dimensions (CFI = 0.925. The Short Form showed a high degree of reliability (alpha ≥ 0.76. Less educated and older parents more frequently attributed a significantly higher importance to parent-centered needs, while parents of multiples revealed a tendency to value infant-centered needs. CONCLUSIONS: The Short Form of the Neonatal Intensive Care Units Family Needs Inventory is a brief, simple, and valid instrument with a high degree of reliability. Further studies are needed to explore associations with practices of family-centered care.

  4. Ridge Orientations of the Ridge-Forming Unit, Sinus Meridiani, Mars-A Fluvial Explanation

    Science.gov (United States)

    Wilkinson, M. Justin; Herridge, A.

    2013-01-01

    Imagery and MOLA data were used in an analysis of the ridge-forming rock unit (RFU) exposed in Sinus Meridiani (SM). This unit shows parallels at different scales with fluvial sedimentary bodies. We propose the terrestrial megafan as the prime analog for the RFU, and likely for other members of the layered units. Megafans are partial cones of fluvial sediment, with radii up to hundreds of km. Although recent reviews of hypotheses for the RFU units exclude fluvial hypotheses [1], inverted ridges in the deserts of Oman have been suggested as putative analogs for some ridges [2], apparently without appreciating The wider context in which these ridges have formed is a series of megafans [3], a relatively unappreciated geomorphic feature. It has been argued that these units conform to the megafan model at the regional, subregional and local scales [4]. At the regional scale suites of terrestrial megafans are known to cover large areas at the foot of uplands on all continents - a close parallel with the setting of the Meridiani sediments at the foot of the southern uplands of Mars, with its incised fluvial systems leading down the regional NW slope [2, 3] towards the sedimentary units. At the subregional scale the layering and internal discontinuities of the Meridiani rocks are consistent, inter alia, with stacked fluvial units [4]. Although poorly recognized as such, the prime geomorphic environment in which stream channel networks cover large areas, without intervening hillslopes, is the megafan [see e.g. 4]. Single megafans can reach 200,000 km2 [5]. Megafans thus supply an analog for areas where channel-like ridges (as a palimpsest of a prior landscape) cover the intercrater plains of Meridiani [6]. At the local, or river-reach scale, the numerous sinuous features of the RFU are suggestive of fluvial channels. Cross-cutting relationships, a common feature of channels on terrestrial megafans, are ubiquitous. Desert megafans show cemented paleo-channels as inverted

  5. Electric Dipole-Magnetic Dipole Polarizability and Anapole Magnetizability of Hydrogen Peroxide as Functions of the HOOH Dihedral Angle.

    Science.gov (United States)

    Pelloni, S; Provasi, P F; Pagola, G I; Ferraro, M B; Lazzeretti, P

    2017-12-07

    The trace of tensors that account for chiroptical response of the H 2 O 2 molecule is a function of the HO-OH dihedral angle. It vanishes at 0° and 180°, due to the presence of molecular symmetry planes, but also for values in the range 90-100° of this angle, in which the molecule is unquestionably chiral. Such an atypical effect is caused by counterbalancing contributions of diagonal tensor components with nearly maximal magnitude but opposite sign, determined by electron flow in open or closed helical paths, and associated with induced electric and magnetic dipole moments and anapole moments. For values of dihedral angle external to the 90-100° interval, the helical paths become smaller in size, thus reducing the amount of cancellation among diagonal components. Shrinking of helical paths determines the appearance of extremum values of tensor traces approximately at 50° and 140° dihedral angles.

  6. Classification Formula and Generation Algorithm of Cycle Decomposition Expression for Dihedral Groups

    Directory of Open Access Journals (Sweden)

    Dakun Zhang

    2013-01-01

    Full Text Available The necessary of classification research on common formula of group (dihedral group cycle decomposition expression is illustrated. It includes the reflection and rotation conversion, which derived six common formulae on cycle decomposition expressions of group; it designed the generation algorithm on the cycle decomposition expressions of group, which is based on the method of replacement conversion and the classification formula; algorithm analysis and the results of the process show that the generation algorithm which is based on the classification formula is outperformed by the general algorithm which is based on replacement conversion; it has great significance to solve the enumeration of the necklace combinational scheme, especially the structural problems of combinational scheme, by using group theory and computer.

  7. On some homological functors of Bieberbach group of dimension four with dihedral point group of order eight

    Science.gov (United States)

    Mohammad, Siti Afiqah; Ali, Nor Muhainiah Mohd; Sarmin, Nor Haniza; Idrus, Nor'ashiqin Mohd; Masri, Rohaidah

    2014-06-01

    A Bieberbach group is a torsion free crystallographic group, which is an extension of a free abelian group of finite rank by a finite point group, while homological functors of a group include nonabelian tensor square, exterior square and Schur Multiplier. In this paper, some homological functors of a Bieberbach group of dimension four with dihedral point group of order eight are computed.

  8. Dihedral angle control to improve the charge transport properties of conjugated polymers in organic field effect transistors

    Science.gov (United States)

    Dharmapurikar, Satej S.; Chithiravel, Sundaresan; Mane, Manoj V.; Deshmukh, Gunvant; Krishnamoorthy, Kothandam

    2018-03-01

    Diketopyrrolopyrrole (DPP) and i-Indigo (i-Ind) are two monomers that are widely explored as active materials in organic field effect transistor and solar cells. These two molecules showed impressive charge carrier mobility due to better packing that are facilitated by quadrupoles. We hypothesized that the copolymers of these monomers would also exhibit high charge carrier mobility. However, we envisioned that the dihedral angle at the connecting point between the monomers will play a crucial role in packing as well as charge transport. To understand the impact of dihedral angle on charge transport, we synthesized three copolymers, wherein the DPP was sandwiched between benzenes, thiophenes and furans. The copolymer of i-Indigo and furan comprising DPP showed a band gap of 1.4 eV with a very high dihedral angle of 179°. The polymer was found to pack better and the coherence length was found to be 112 Å. The hole carrier mobility of these polymer was found to be highest among the synthesized polymer i.e. 0.01 cm2/vs. The copolymer comprising benzene did not transport hole and electrons. The dihedral angle at the connecting point between i and Indigo and benzene DPP was 143 Å, which the packing and consequently charge transport properties.

  9. Increased numbers of spleen colony forming units in B cell deficient CBA/N mice

    International Nuclear Information System (INIS)

    Wiktor-Jedrzejczak, W.; Krupienicz, A.; Scher, I.

    1986-01-01

    The formation of exogenous and endogenous spleen colonies was studied in immune-defective mice expressing the CBA/N X-linked xid gene. Bone marrow and spleen cells of immune deficient mice formed increased numbers of eight-day exogenous spleen colonies when transferred to either normal or B cell deficient lethally irradiated recipients. Moreover, defective mice showed increased formation of five-day endogenous spleen colonies (derived from transient endogenous colony forming units; T-CFU) and of ten-day endogenous spleen colonies (derived from CFU-S). Among the possible mechanisms responsible for the observed effects, the most probable appears the one in which decreased numbers of B cell precursors stimulate stem cell pools through a feedback mechanism. (orig.) [de

  10. Fluvial Channel Networks as Analogs for the Ridge-Forming Unit, Sinus Meridiani, Mars

    Science.gov (United States)

    Wilkinson, M. J.; du Bois, J. B.

    2010-01-01

    Fluvial models have been generally discounted as analogs for the younger layered rock units of Sinus Meridiani. A fluvial model based on the large fluvial fan provides a possibly close analog for various features of the sinuous ridges of the etched, ridge-forming unit (RFU) in particular. The close spacing of the RFU ridges, their apparently chaotic orientations, and their organization in dense networks all appear unlike classical stream channel patterns. However, drainage patterns on large fluvial fans low-angle, fluvial aggradational features, 100s of km long, documented worldwide by us provide parallels. Some large fan characteristics resemble those of classical floodplains, but many differences have been demonstrated. One major distinction relevant to the RFU is that channel landscapes of large fans can dominate large areas (1.2 million km2 in one S. American study area). We compare channel morphologies on large fans in the southern Sahara Desert with ridge patterns in Sinus Meridiani (fig 1). Stream channels are the dominant landform on large terrestrial fans: they may equate to the ubiquitous, sinuous, elongated ridges of the RFU that cover areas region wide. Networks of convergent/divergent and crossing channels may equate to similar features in the ridge networks. Downslope divergence is absent in channels of terrestrial upland erosional landscapes (fig. 1, left), whereas it is common to both large fans (fig. 1, center) and RFU ridge patterns (fig 1, right downslope defined as the regional NW slope of Sinus Meridiani). RFU ridge orientation, judged from those areas apparently devoid of impact crater control, is broadly parallel with the regional slope (arrow, fig. 1, right), as is mean orientation of major channels on large fans (arrow, fig. 1, center). High densities per unit area characterize fan channels and martian ridges reaching an order of magnitude higher than those in uplands just upstream of the terrestrial study areas fig. 1. In concert with

  11. Pairwise NMR experiments for the determination of protein backbone dihedral angle Φ based on cross-correlated spin relaxation

    International Nuclear Information System (INIS)

    Takahashi, Hideo; Shimada, Ichio

    2007-01-01

    Novel cross-correlated spin relaxation (CCR) experiments are described, which measure pairwise CCR rates for obtaining peptide dihedral angles Φ. The experiments utilize intra-HNCA type coherence transfer to refocus 2-bond J NCα coupling evolution and generate the N (i)-C α (i) or C'(i-1)-C α (i) multiple quantum coherences which are required for measuring the desired CCR rates. The contribution from other coherences is also discussed and an appropriate setting of the evolution delays is presented. These CCR experiments were applied to 15 N- and 13 C-labeled human ubiquitin. The relevant CCR rates showed a high degree of correlation with the Φ angles observed in the X-ray structure. By utilizing these CCR experiments in combination with those previously established for obtaining dihedral angle Ψ, we can determine high resolution structures of peptides that bind weakly to large target molecules

  12. Effects of Dihedral Angle on Pool Boiling Heat Transfer from Two Tubes in Vertical Alignment

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Myeong-Gie [Andong National University, Andong (Korea, Republic of)

    2014-10-15

    to study the effects of the dihedral angle (α) and the heat flux of the lower tube on heat transfer enhancement of the upper tube, arranged one above the other in the same vertical plane. The combined effects of the dihedral angle and the heat flux of the lower tube on heat transfer enhancement of the upper tube were investigated. The increase in α eventually increases h{sub r} . When α changes from 2 .deg. to 18 .deg. the value of h{sub r} increases about 20.3% for q″{sub L}=10kW/m{sup 2}. The enhancement is clearly observed at the heat fluxes where the convective effect is dominant.

  13. An apparatus and process for forming P-N junction semiconductor units

    International Nuclear Information System (INIS)

    1975-01-01

    It is stated that although many methods of ion implantation have been developed it seems that the method of 'hot implantation' is still in its infancy. In this method the target is preheated in an ion implantor during implantation of ions, leading to radiation enhanced diffusion. The apparatus described comprises the following: (i) a bell jar evacuated to -3 Torr containing four electrodes arranged in two pairs, one electrode of the first pair being in the form of a mesh; (ii) a source of high pulsating direct voltage connected to the first pair of electrodes, with the mesh electrode negatively poled, to ionise the rarified air in the bell jar and accelerate the resulting positive N and O ions; (iii) an RF voltage source connected to the other pair of electrodes to facilitate the ionisation; (iv) a dopant semiconductor body, heated by a wire wound heater, placed underneath the mesh electrode so that the accelerated ions bombard the dopant layer through the mesh electrode and implant dopant atoms in the semiconductor body. The distance between the mesh electrode and the surface of the dopant-coated semiconductive body, should be about 5mm. The mesh electrode consists of a sputtering-resistant refractory metal, and includes a cooling system. The dopant-coated semiconductive body is placed on a ceramic plate in the bell jar, and the power supply line of the heater is insulated from the voltage applied to the negative electrode, which is earthed, by using an insulated heater transformer combined with an autotransformer. The ceramic plate is attached to a plate on which the heater is wound, and the temperature of the heating should be variable between 400 0 and 500 0 C. A process for forming P-N junction semiconductor units using this apparatus is described. (U.K.)

  14. Quantitative assay for the number of leukemic spleen colony forming unit in radiation-induced murine myeloid leukemia

    Energy Technology Data Exchange (ETDEWEB)

    Nara, N [Tokyo Medical and Dental Univ. (Japan). School of Medicine; Bessho, M

    1981-11-01

    In mice with myelogenous leukemia, leukemic spleen colony forming units were assayed quantitatively. When 5 x 10/sup 3/ - 2 x 10/sup 4/ leukemic cells were transplanted to other mice of the same strain, a rectilinear relationship (p < 0.01) was found between the number of the cells transplanted and that of the colonies formed on the surface of the spleen. From these results, the authors considered that myelogenous leukemia in mice is an adequate model for acute myelogenous leukemia in human adults, and that the quantitative assay of the leukemic colony forming units can be used for sensitivity tests of antileukemic agents.

  15. The covariant formulation of Maxwell's equations expressed in a form independent of specific units

    Energy Technology Data Exchange (ETDEWEB)

    Heras, Jose A; Baez, G [Departamento de Ciencias Basicas, Universidad Autonoma Metropolitana Unidad Azcapotzalco, Av. San Pablo No. 180, Col. Reynosa, 02200 Mexico DF (Mexico)], E-mail: herasgomez@gmail.com, E-mail: gbaez@correo.azc.uam.mx

    2009-01-15

    The covariant formulation of Maxwell's equations can be expressed in a form independent of the usual systems of units by introducing the constants {alpha}, {beta} and {gamma} into these equations. Maxwell's equations involving these constants are then specialized to the most commonly used systems of units: Gaussian, SI and Heaviside-Lorentz by giving the constants {alpha}, {beta} and {gamma} the values appropriate to each system.

  16. The nonabelian tensor square of Bieberbach group of dimension five with dihedral point group of order eight

    Science.gov (United States)

    Fauzi, Wan Nor Farhana Wan Mohd; Idrus, Nor'ashiqin Mohd; Masri, Rohaidah; Sarmin, Nor Haniza

    2014-07-01

    The nonabelian tensor product was originated in homotopy theory as well as in algebraic K-theory. The nonabelian tensor square is a special case of the nonabelian tensor product where the product is defined if the two groups act on each other in a compatible way and their action are taken to be conjugation. In this paper, the computation of nonabelian tensor square of a Bieberbach group, which is a torsion free crystallographic group, of dimension five with dihedral point group of order eight is determined. Groups, Algorithms and Programming (GAP) software has been used to assist and verify the results.

  17. The power of hard-sphere models: explaining side-chain dihedral angle distributions of Thr and Val.

    Science.gov (United States)

    Zhou, Alice Qinhua; O'Hern, Corey S; Regan, Lynne

    2012-05-16

    The energy functions used to predict protein structures typically include both molecular-mechanics and knowledge-based terms. In contrast, our approach is to develop robust physics- and geometry-based methods. Here, we investigate to what extent simple hard-sphere models can be used to predict side-chain conformations. The distributions of the side-chain dihedral angle χ(1) of Val and Thr in proteins of known structure show distinctive features: Val side chains predominantly adopt χ(1) = 180°, whereas Thr side chains typically adopt χ(1) = 60° and 300° (i.e., χ(1) = ±60° or g- and g(+) configurations). Several hypotheses have been proposed to explain these differences, including interresidue steric clashes and hydrogen-bonding interactions. In contrast, we show that the observed side-chain dihedral angle distributions for both Val and Thr can be explained using only local steric interactions in a dipeptide mimetic. Our results emphasize the power of simple physical approaches and their importance for future advances in protein engineering and design. Copyright © 2012 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  18. A short form of the neonatal intensive care unit family needs inventory

    Directory of Open Access Journals (Sweden)

    Elisabete Alves

    2016-01-01

    Conclusions: The Short Form of the NICU Family Needs Inventory is a brief, simple, and valid instrument with a high degree of reliability. Further studies are needed to explore associations with practices of family‐centered care.

  19. There's something about Molly: The underresearched yet popular powder form of ecstasy in the United States.

    Science.gov (United States)

    Palamar, Joseph J

    2017-01-01

    Molly has been the street name for powder or crystalline ecstasy (3,4-methylenedioxymethamphetamine [MDMA]) in the United States since the early 2000s; however, few studies have examined Molly use or included Molly in the definition of ecstasy/MDMA. Prevalence of self-reported ecstasy use is being underreported on surveys due to the lack of inclusion of "Molly," although Molly is often so adulterated with novel psychoactive substances such as synthetic cathinones ("bath salts") that the name "Molly" may no longer adequately represent ecstasy/MDMA. The author recommends that Molly use and Molly purity be further studied to more adequately inform prevention and harm reduction.

  20. The United Kingdom Hydrogen Association Forms with International Collaboration in Mind

    International Nuclear Information System (INIS)

    Karen Hall; John Carolin; Ian Williamson

    2006-01-01

    In April 2006, the United Kingdom Hydrogen Association was launched. This paper will describe the context under which the need was established, and address the challenges and opportunities faced in creating the association. A UK Hydrogen Association can encourage information sharing among regional hydrogen efforts, and provide a mechanism for a larger, single voice on the national level. In addition, a UK Hydrogen Association can serve as a focal point for UK participation in EU activities such as the European Hydrogen and Fuel Cell Technology Platform (HFP), and other international activities such as IPHE and IEA. The results of the stake holder briefing and progress of a UK Hydrogen Association will be presented, with a focus on international collaboration. (authors)

  1. The United Kingdom Hydrogen Association Forms with International Collaboration in Mind

    International Nuclear Information System (INIS)

    Karen Hall; John Carolin; Ian Williamson

    2006-01-01

    In April 2006, the United Kingdom Hydrogen Association was launched. This paper will describe the context under which the need was established, and address the challenges and opportunities faced in creating the association. A UK Hydrogen Association can encourage information sharing among regional hydrogen efforts, and provide a mechanism for a larger, single voice on the national level. In addition, a UK Hydrogen Association can serve as a focal point for UK participation in EU activities such as the European Hydrogen and Fuel Cell Technology Platform (HFP), and other international activities such as IPHE and IEA. The results of the stakeholder briefing and progress of a UK Hydrogen Association will be presented, with a focus on international collaboration. (authors)

  2. Lymphocyte colony forming units and its application to the study of radiosensitivity

    International Nuclear Information System (INIS)

    Ma Xiangrui; Wang Tao; Wang Hongyun

    1991-07-01

    Kinetics and radiosensitivity of human lymphocytes were studied by the techniques of monolayer agar culture and liquid culture in vitro. In the experiments of lymphocyte kinetics, PHA was designated as a motogen for T lymphocyte. LPS, MEBC and BSA were chosen as mitogens for B lymphocyte. The data from thses experiments showed that under the alone or combination stimulation of LPS, MRBC and BSA, B lymphocytes developed to form colonies in agar culture (0.3%) with the same manner. The stimulation of LPS to B lymphocytes was most significant. By the day 6 after seeding, the numbers of colonies in agar culture were maximal. Whereas the numbers decreased significantly by the day 8. The number of T lymphocyte colonies increased with culture time within 12 days. The peak of 3 H-TdR incorporation into T lymphocytes in liquid culture occured at 5th day after seeding. The data above-mentioned demonstrated that the kinetics of lymphocytes cultured in two kinds of environments were different. The studies of the radiosensitivity of T lymphocytes showed that the decreasing in the number of colonies and rate of 3 H-TdR incorporation varied in different dose ranges. In the range of 0∼1.0 Gy, r = -0.96, D 0 value was 1.71 Gy for TL-CFC in agar culture, r = -.96, D 0 value was 4.34 Gy for the proliferation T lymphocytes in liquid culture. In the range of 1.0∼6.0 Gy, r were -0.99 and -0.98, the D 0 were 5.88 and 7.36 Gy respectively. The declining tendency in colonies formed by BL-CFC was the same as that of TL-CFC, r = -0.97, for the range of 0∼1.0 Gy, r = -0.97, for the range of 1.0∼3.0, the D 0 values were 1.35 and 4.36 Gy respectively. The results from these experiments shown that the colony technique was a good method for the study in radiosensitivity

  3. Development and evaluation of new multiple-unit levodopa sustained-release floating dosage forms.

    Science.gov (United States)

    Goole, J; Vanderbist, F; Amighi, K

    2007-04-04

    This work relates to the development and the in vitro evaluation of sustained-release minitablets (MT), prepared by melt granulation and subsequent compression, which are designed to float over an extended period of time. Levodopa was used as a model drug. The importance of the composition and manufacturing parameters of the MT on their floating and dissolution properties was then examined. The investigation showed that MT composition and MT diameter had the greatest influence on drug release, which was sustained for more than 8h. By using the same formulation, the best floating properties were obtained with 3mm MT prepared at low compression forces ranging between 50 and 100N. Their resultant-weight (RW) values were always higher than those obtained with a marketed HBS dosage form within 13h. When they were filled into gelatin capsules, no sticking was observed. By evaluating the dissolution profiles of levodopa at different pH values, it was found that dissolution profiles depend more on the prolonged-release ability of Methocel K15M than on the pH-dependent solubility of levodopa. Finally, the robustness of the floating MT was assessed by testing the drug release variability in function of the stirring conditions during dissolution tests.

  4. Measurement Invariance of the Internet Gaming Disorder Scale-Short-Form (IGDS9-SF) between the United States of America, India and the United Kingdom.

    Science.gov (United States)

    Pontes, Halley M; Stavropoulos, Vasileios; Griffiths, Mark D

    2017-11-01

    The Internet Gaming Disorder Scale-Short-Form (IGDS9-SF) has been extensively used worldwide to assess Internet Gaming Disorder (IGD) behaviors. Therefore, investigating cultural limitations and implications in its applicability is necessary. The cross-cultural feasibility of a test can be psychometrically evaluated with measurement invariance analyses. Thus, the present study used Multigroup Confirmatory Factor Analysis (MGCFA) to examine the IGDS9-SF measurement invariance across gamers from the United States of America (USA), India, and the United Kingdom (UK). A total of 1013 gamers from the USA (n = 405), India (n = 336), and the UK (n = 272) were recruited. Although the one-factor structure of the IGD construct was supported, cross-country variations were demonstrated considering the way that this was reflected on items assessing preoccupation/salience, tolerance, deception, gaming escapism/mood modification, as well as daily activities' impairment related to gaming. Furthermore, the same scores on items assessing withdrawal symptoms, tolerance, lack of control over gaming engagement, escapism/mood modification and daily activities impairment associated to gaming, have been found to reflect various levels of IGD severity across the three groups. The implications of these results are further discussed in the context of existing evidence regarding the assessment of IGD. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Perception Differences in Ambiguous Forms of Workplace Sexual Harassment: A Comparison between the United States and Turkey.

    Science.gov (United States)

    Toker, Yonca

    2016-07-03

    Certain social-sexual behaviors that could be potentially encountered in workplaces are ambiguous in nature and perceiving them as sexual harassment can depend on the culture. With an aim to delineate the overlap and distinctions of sexual harassment perceptions of such behaviors across samples of women university students from Turkey (TR, N = 215) and the United States (US, N = 209), measurement invariance and latent mean differences in perceiving three ambiguous forms; sexist hostility, sexual hostility, and insinuation-of-interest, were examined. It was hypothesized that the US sample would perceive sexist hostility more sexually harassing as sexist workplace discriminatory practices are emphasized as a form of sexual harassment, and that the TR sample would perceive sexual hostility and insinuation-of-interest as more sexually harassing as women in TR operate in a conservative context. Despite similarities in rank ordering, US participants perceived sexist hostility more sexually harassing; insinuation-of-interest and sexual hostility less sexually harassing than Turkish participants, supporting all three hypotheses. There are implications of differing perceptions across cultures for organizations in terms of disseminating awareness via training programs about the forms of sexual harassment (SH) in a local context and for taking account of local findings in shaping the labor code of countries in relation to SH.

  6. AAPG forms environmental unit

    International Nuclear Information System (INIS)

    Ganapathy, V.

    1992-01-01

    This paper reports that the American Association of Petroleum Geologists has established a new environmental geology division, while a geology related committee is moving from Oklahoma. AAPG set up a Division of Environmental Geosciences to provide services and information to its members working in environmental geosciences, the Bernold M. Bruno Hanson of Midland, Tex., the DEG's first president. The division will publish a newsletter in October, and plans are being set to solicit technical articles for consideration by the AAPG Bulletin and for a possible future separate DEG technical publication

  7. A Bayesian-probability-based method for assigning protein backbone dihedral angles based on chemical shifts and local sequences

    Energy Technology Data Exchange (ETDEWEB)

    Wang Jun; Liu Haiyan [University of Science and Technology of China, Hefei National Laboratory for Physical Sciences at the Microscale, and Key Laboratory of Structural Biology, School of Life Sciences (China)], E-mail: hyliu@ustc.edu.cn

    2007-01-15

    Chemical shifts contain substantial information about protein local conformations. We present a method to assign individual protein backbone dihedral angles into specific regions on the Ramachandran map based on the amino acid sequences and the chemical shifts of backbone atoms of tripeptide segments. The method uses a scoring function derived from the Bayesian probability for the central residue of a query tripeptide segment to have a particular conformation. The Ramachandran map is partitioned into representative regions at two levels of resolution. The lower resolution partitioning is equivalent to the conventional definitions of different secondary structure regions on the map. At the higher resolution level, the {alpha} and {beta} regions are further divided into subregions. Predictions are attempted at both levels of resolution. We compared our method with TALOS using the original TALOS database, and obtained comparable results. Although TALOS may produce the best results with currently available databases which are much enlarged, the Bayesian-probability-based approach can provide a quantitative measure for the reliability of predictions.

  8. Predicting backbone Cα angles and dihedrals from protein sequences by stacked sparse auto-encoder deep neural network.

    Science.gov (United States)

    Lyons, James; Dehzangi, Abdollah; Heffernan, Rhys; Sharma, Alok; Paliwal, Kuldip; Sattar, Abdul; Zhou, Yaoqi; Yang, Yuedong

    2014-10-30

    Because a nearly constant distance between two neighbouring Cα atoms, local backbone structure of proteins can be represented accurately by the angle between C(αi-1)-C(αi)-C(αi+1) (θ) and a dihedral angle rotated about the C(αi)-C(αi+1) bond (τ). θ and τ angles, as the representative of structural properties of three to four amino-acid residues, offer a description of backbone conformations that is complementary to φ and ψ angles (single residue) and secondary structures (>3 residues). Here, we report the first machine-learning technique for sequence-based prediction of θ and τ angles. Predicted angles based on an independent test have a mean absolute error of 9° for θ and 34° for τ with a distribution on the θ-τ plane close to that of native values. The average root-mean-square distance of 10-residue fragment structures constructed from predicted θ and τ angles is only 1.9Å from their corresponding native structures. Predicted θ and τ angles are expected to be complementary to predicted ϕ and ψ angles and secondary structures for using in model validation and template-based as well as template-free structure prediction. The deep neural network learning technique is available as an on-line server called Structural Property prediction with Integrated DEep neuRal network (SPIDER) at http://sparks-lab.org. Copyright © 2014 Wiley Periodicals, Inc.

  9. Production of humoral factors that stimulate spleen colony-forming units in mice irradiated with moderate doses of X rays

    International Nuclear Information System (INIS)

    Grande, T.; Gonzalez, J.; Tejero, C.; Maganto, G.; Bueren, J.A.

    1990-01-01

    The production of humoral factors that stimulate spleen colony-forming units (CFU-S) has been studied in irradiated mice using an in vivo diffusion chamber assay. The experiments show that a significant release of factors that stimulate CFU-S takes place in the first few days after irradiation with moderate doses of 1.5 or 5 Gy. In contrast, the release of significant amounts of these humoral factors was not seen in animals irradiated with either low (0.75 Gy) or high (10 Gy) doses of X rays. The correlation observed between the production of factors that stimulate the CFU-S and the hemopoietic regeneration kinetics of the irradiated mice suggests that these factors represent part of the physiological regulators controlling the proliferation of CFU-S

  10. Capacity of bone marrow colony forming unit-fibroblasts in vitro from mice with combined radiation-burn injury

    International Nuclear Information System (INIS)

    Chen Xinghua; Luo Chengji; Guo Chaohua; Wang Ping

    1999-01-01

    Objective: To investigate the capacity of bone marrow colony forming unit-fibroblasts (CFU-F) from mice with combined radiation-burn injury. Methods: Mice were treated with 5.0 Gy γ-ray radiation alone, 15% total body surface area (TBSA) III degree burn alone or combined radiation-burn. The numbers of CFU-Fs were assayed by Dexter's method. Results: The numbers of CFU-Fs from mice with radiation and combined radiation-burn injury were significantly decreased, compared with those of controls and mice with burn injury alone (P<0.05-0.01). conclusion: The results reveal that the repairing process of bone marrow stromal cells from mice with radiation injury and combined radiation-burn injury is slow, and the combined radiation-burn injury inflicted on the stromal cells possesses the characteristic of radiation injury

  11. Overview of PAT process analysers applicable in monitoring of film coating unit operations for manufacturing of solid oral dosage forms.

    Science.gov (United States)

    Korasa, Klemen; Vrečer, Franc

    2018-01-01

    Over the last two decades, regulatory agencies have demanded better understanding of pharmaceutical products and processes by implementing new technological approaches, such as process analytical technology (PAT). Process analysers present a key PAT tool, which enables effective process monitoring, and thus improved process control of medicinal product manufacturing. Process analysers applicable in pharmaceutical coating unit operations are comprehensibly described in the present article. The review is focused on monitoring of solid oral dosage forms during film coating in two most commonly used coating systems, i.e. pan and fluid bed coaters. Brief theoretical background and critical overview of process analysers used for real-time or near real-time (in-, on-, at- line) monitoring of critical quality attributes of film coated dosage forms are presented. Besides well recognized spectroscopic methods (NIR and Raman spectroscopy), other techniques, which have made a significant breakthrough in recent years, are discussed (terahertz pulsed imaging (TPI), chord length distribution (CLD) analysis, and image analysis). Last part of the review is dedicated to novel techniques with high potential to become valuable PAT tools in the future (optical coherence tomography (OCT), acoustic emission (AE), microwave resonance (MR), and laser induced breakdown spectroscopy (LIBS)). Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Introduction: Philosophers of the World Unite! Theorising Digital Labour and Virtual Work—Definitions, Dimensions, and Forms

    Directory of Open Access Journals (Sweden)

    Marisol Sandoval

    2014-09-01

    Full Text Available In 1845, Karl Marx (1845, 571 formulated the 11th Feuerbach Thesis: “The philosophers have only interpreted the world in various ways; the point is to change it.” Today, interpreting the world has become an important form of labour that is expressed on and with the help of digital media. In this context it has become common to talk about digital labour and virtual work. Yet the changes that digital, social, and mobile media bring about in the world of labour and work have thus far only been little theoretically interpreted. In order to change the information society for the better, we first have to interpret digital labour with the help of critical theories. Social theorists of the world from different fields, backgrounds, interdisciplines, transdisciplines, and disciplines have to unite for this collective philosophical task. This special issue of tripleC: Communication, Capitalism & Critique aims to contribute to building a theoretical framework for the critical analysis of digital labour, virtual work, and related concepts that can initiate further debates, inform empirical studies, and inspire social struggles connected to work and labour in and beyond digital capitalism. The papers collected in this special issue (a provide systematic definitions of digital labour, (b analyse its specific dimension, and (c discuss different forms of digital labour.

  13. Solutions of the Yang-Baxter equation: Descendants of the six-vertex model from the Drinfeld doubles of dihedral group algebras

    International Nuclear Information System (INIS)

    Finch, P.E.; Dancer, K.A.; Isaac, P.S.; Links, J.

    2011-01-01

    The representation theory of the Drinfeld doubles of dihedral groups is used to solve the Yang-Baxter equation. Use of the two-dimensional representations recovers the six-vertex model solution. Solutions in arbitrary dimensions, which are viewed as descendants of the six-vertex model case, are then obtained using tensor product graph methods which were originally formulated for quantum algebras. Connections with the Fateev-Zamolodchikov model are discussed.

  14. Normal mode analysis based on an elastic network model for biomolecules in the Protein Data Bank, which uses dihedral angles as independent variables.

    Science.gov (United States)

    Wako, Hiroshi; Endo, Shigeru

    2013-06-01

    We have developed a computer program, named PDBETA, that performs normal mode analysis (NMA) based on an elastic network model that uses dihedral angles as independent variables. Taking advantage of the relatively small number of degrees of freedom required to describe a molecular structure in dihedral angle space and a simple potential-energy function independent of atom types, we aimed to develop a program applicable to a full-atom system of any molecule in the Protein Data Bank (PDB). The algorithm for NMA used in PDBETA is the same as the computer program FEDER/2, developed previously. Therefore, the main challenge in developing PDBETA was to find a method that can automatically convert PDB data into molecular structure information in dihedral angle space. Here, we illustrate the performance of PDBETA with a protein-DNA complex, a protein-tRNA complex, and some non-protein small molecules, and show that the atomic fluctuations calculated by PDBETA reproduce the temperature factor data of these molecules in the PDB. A comparison was also made with elastic-network-model based NMA in a Cartesian-coordinate system. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. 1. modification of the proliferative capacity of transplanted bone marrow colony forming units by changes in the host environment

    International Nuclear Information System (INIS)

    Beran, M.; Tribukait, B.

    1974-01-01

    Regulation of the proliferation of transplanted colony forming units (CFUs) was investigated in lethally irradiated mice, pretreated by methods known to accelerate hemopoietic recovery after sublethal irradiation. Prospective recipients were exposed to either hypoxia, vinblastine or priming irradiation and at different intervals thereafter lethally irradiated and transplanted with bone marrow. Repopulation of CFUs was determined by counting the number of splenic colonies in primary recipients or by retransplantation. Regeneration of grafted CFUs was greatly accelerated and their self-renewal capacity increased in mice grafted within 2 days after hypoxia. Also the number of splenic colonies formed by grafted syngeneic CFUs as well as by C57B1 parent CFUs growing in BC3F1 hosts was significantly increased. The effect was not dependent on the seeding efficiency of CFUs and apparently resulted from hypoxia induced changes in the hosts' physiological environment. Proliferative capacity of grafted CFUs increased remarkably in hosts receiving vinblastine 2 or 4 days prior to irradiation. Priming irradiation given 6 days before main irradiation accelerated, given 2 days before impaired regeneration of CFUs. The increased rate of regeneration was not related to the cellularity of hemopoietic organs at the time of transplantation. The growth of CFUs in diffusion chambers implanted into posthypoxic mice was only slightly improved which does indicate that the accelerated regeneration of CFUs in posthypoxic mice is mainly due to the changes in the hemopoietic microenvironment. A short conditioning of transplanted CFUs by host factor(s) was sufficient to improve regeneration. The results might suggest that the speed of hemopoietic regeneration depends on the number of CFUs being induced to proliferate shortly after irradiation, rather than on the absolute numbers of CFUs available to the organism. (author)

  16. Thermal sensitivity and thermally enhanced radiosensitivity of murine bone marrow granulocyte-macrophage colony-forming units (CFU-GM)

    International Nuclear Information System (INIS)

    Yoshida, Hiroshi

    1994-01-01

    This study was to evaluate thermal response of granulocyte-macrophage colony-forming unit (CFU-GM) in vitro and to investigate the difference of thermally enhanced radiosensitivity on cell survivals of CFU-GM between in vitro and in vivo. In in vitro heating exposure, bone marrow suspensions, obtained from mouse femora or tibiae, were incubated; and in vivo heating exposure, the lower half-body of mice were immersed in a circulating hot water bath. For irradiation schedules, cell suspensions were irradiated in vitro or in vivo (whole-body irradiation). Thermal sensitivity curve, obtained by in vivo heating exposure, showed a shoulder region at short exposures followed by an exponential decline during longer heating exposures. The Arrhenius curve showed a break at 42.3deg C and inactivation enthalpy was 1836 kJ/mol (438 kcal/mole) below the break point and 704 kJ/mole (168 kcal/mole) above the point. When bone marrow suspensions, obtained after either in vitro or in vivo irradiation, were heated in vitro at 42deg C for 60 min, supura-additive effect on cell survivals was observed by in vivo irradiation, but not observed by in vitro irradiation. Thermal enhancement ratio (TER), defined as D 0 of combined in vivo irradiation and in vitro heating divided by D 0 of the sole in vivo irradiation, was 1.12. In vivo heating following in vivo irradiation also showed supra-additive effect, giving TER of 1.66. These findings indicated that murine marrow CFU-GM is sensitive to hyperthermia and that thermal radiosensitization is never negligible when hyperthermia is employed with preceding X-irradiation. Thus, combined use of radiotherapy and hyperthermia may decrease bone marrow function. (N.K.)

  17. Predicting the oral pharmacokinetic profiles of multiple-unit (pellet) dosage forms using a modeling and simulation approach coupled with biorelevant dissolution testing: case example diclofenac sodium.

    Science.gov (United States)

    Kambayashi, Atsushi; Blume, Henning; Dressman, Jennifer B

    2014-07-01

    The objective of this research was to characterize the dissolution profile of a poorly soluble drug, diclofenac, from a commercially available multiple-unit enteric coated dosage form, Diclo-Puren® capsules, and to develop a predictive model for its oral pharmacokinetic profile. The paddle method was used to obtain the dissolution profiles of this dosage form in biorelevant media, with the exposure to simulated gastric conditions being varied in order to simulate the gastric emptying behavior of pellets. A modified Noyes-Whitney theory was subsequently fitted to the dissolution data. A physiologically-based pharmacokinetic (PBPK) model for multiple-unit dosage forms was designed using STELLA® software and coupled with the biorelevant dissolution profiles in order to simulate the plasma concentration profiles of diclofenac from Diclo-Puren® capsule in both the fasted and fed state in humans. Gastric emptying kinetics relevant to multiple-units pellets were incorporated into the PBPK model by setting up a virtual patient population to account for physiological variations in emptying kinetics. Using in vitro biorelevant dissolution coupled with in silico PBPK modeling and simulation it was possible to predict the plasma profile of this multiple-unit formulation of diclofenac after oral administration in both the fasted and fed state. This approach might be useful to predict variability in the plasma profiles for other drugs housed in multiple-unit dosage forms. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Novelly formed products of the interaction of fuel with construction materials of the 4th unit of Chernobyl NPP

    International Nuclear Information System (INIS)

    Borovoj, A.A.; Galkin, B.Ya.; Krinitsyn, A.P.; Pazukhin, Eh.M.; Kheruvimov, A.N.; Chechcherov, K.P.; Anderson, E.B.

    1991-01-01

    Radiation environment and map of sampling route in the steam distributing collector of the 4th unit of the Chernobyl NPP are described. The results of gamma- and alpha radiometric analyses as well as chemical analysis are presented. Samples of core materials taken from the depth of fuel-containing masses by drilling through reactor vault wall of the damaged power unit are described

  19. Novelly formed products of the interaction of fuel with construction materials of the 4th unit of Chernobyl NPP

    International Nuclear Information System (INIS)

    Borovoj, A.A.; Galkin, B.Ya.; Drapchinskij, L.V.; Krinitsyn, A.P.; Pazukhin, Eh.M.; Petrov, B.F.; Pleskachevskij, L.A.; Checherov, K.P.

    1991-01-01

    Radiation environment and position of fuel-containing masses in the bubbler pond of the 4th unit of the Chernobyl NPP are described. Classification of the products of fuel interaction with structural materials is given. Amounts of fuel on the 1st and 2nd floor of the bubbler pond are estimated. Postaccident pictures of the premises of the bubbler pond are presented for the first time

  20. Mechanical Properties of Ti-6Al-4V Octahedral Porous Material Unit Formed by Selective Laser Melting

    Directory of Open Access Journals (Sweden)

    Jianfeng Sun

    2012-01-01

    Full Text Available The Ti-6Al-4V octahedral porous material unit is designed to calculate its load. In this paper, ANSYS is adopted for the load simulation of the unit. And a simplified model of dimensional theoretical calculation is established, by which the analytical equation of the fracture load is obtained and the calculation of the load of Ti-6Al-4V is completed. Moreover, selective laser melting is adopted in processing the Ti-6Al-4V porous material unit. The experimental value of fracture load of this material is obtained through compression experiment. The results show that the simulation curves approximate the variation tendency of the elastic deformation of the compression curves; the curves of theoretical calculation approximate the general variation tendency; and the experimental value of fracture load is very close to the theoretical value. Therefore, the theoretical prediction accuracy of fracture load is high, which lays the foundation for the mechanical properties of the octahedral porous material.

  1. Loss of the ability to generate large burst-forming unit-like megakaryocytic colonies from thawed cord blood in semisolid cultures after short term suspension culture.

    Science.gov (United States)

    Eskola, M; Bäckman, S; Möttönen, S; Kekomäki, R

    2015-04-01

    Total colony-forming cells from thawed cord blood units (CBUs) include megakaryocytic colony-forming units (CFU-Mks), which survive the freezing process. The aim of this study was to evaluate whether different megakaryocytic progenitors from unseparated CBUs survive the freezing process and a short-term liquid culture. Thawed samples of CBUs were cultured in liquid medium. During the cultures, serial samples were drawn to assess the growth of different megakaryocytic progenitors in a semisolid collagen medium with identical cytokines as in the liquid medium. Megakaryocytic cells were detected using immunohistochemistry and flow cytometry. In suspension culture, the megakaryocytic progenitors almost completely lost the ability to generate large (burst-forming unit-like, BFU-like) megakaryocytic colonies in semisolid cultures (large colonies, median count per chamber d0: 7.25 vs. d7: 1.5; P culture in suspension resulted in the decline of small colonies as well (d7: 16.0 vs. d14: 5.75; P = 0.0088). Total CFU-Mk count declined from 23.3 (range 12.5-34.0) at d0 to 7.25 (range 1.0-13.5) at d14 (P culture after a short suspension culture. Small CFU-Mks were observed throughout the cultures. It may be that the BFU-Mk colonies matured and acquired CFU-Mk behaviour. © 2014 International Society of Blood Transfusion.

  2. CACA-TOCSY with alternate 13C–12C labeling: a 13Cα direct detection experiment for mainchain resonance assignment, dihedral angle information, and amino acid type identification

    Science.gov (United States)

    Takeuchi, Koh; Frueh, Dominique P.; Sun, Zhen-Yu J.; Hiller, Sebastian

    2010-01-01

    We present a 13C direct detection CACA-TOCSY experiment for samples with alternate 13C–12C labeling. It provides inter-residue correlations between 13Cα resonances of residue i and adjacent Cαs at positions i − 1 and i + 1. Furthermore, longer mixing times yield correlations to Cα nuclei separated by more than one residue. The experiment also provides Cα-to-sidechain correlations, some amino acid type identifications and estimates for ψ dihedral angles. The power of the experiment derives from the alternate 13C–12C labeling with [1,3-13C] glycerol or [2-13C] glycerol, which allows utilizing the small scalar 3JCC couplings that are masked by strong 1JCC couplings in uniformly 13C labeled samples. PMID:20383561

  3. CACA-TOCSY with alternate 13C-12C labeling: a 13Cα direct detection experiment for mainchain resonance assignment, dihedral angle information, and amino acid type identification

    International Nuclear Information System (INIS)

    Takeuchi, Koh; Frueh, Dominique P.; Sun, Zhen-Yu J.; Hiller, Sebastian; Wagner, Gerhard

    2010-01-01

    We present a 13 C direct detection CACA-TOCSY experiment for samples with alternate 13 C- 12 C labeling. It provides inter-residue correlations between 13 C α resonances of residue i and adjacent C α s at positions i - 1 and i + 1. Furthermore, longer mixing times yield correlations to C α nuclei separated by more than one residue. The experiment also provides C α -to-sidechain correlations, some amino acid type identifications and estimates for ψ dihedral angles. The power of the experiment derives from the alternate 13 C- 12 C labeling with [1,3- 13 C] glycerol or [2- 13 C] glycerol, which allows utilizing the small scalar 3 J CC couplings that are masked by strong 1 J CC couplings in uniformly 13 C labeled samples.

  4. CACA-TOCSY with alternate 13C-12C labeling: a 13Calpha direct detection experiment for mainchain resonance assignment, dihedral angle information, and amino acid type identification.

    Science.gov (United States)

    Takeuchi, Koh; Frueh, Dominique P; Sun, Zhen-Yu J; Hiller, Sebastian; Wagner, Gerhard

    2010-05-01

    We present a (13)C direct detection CACA-TOCSY experiment for samples with alternate (13)C-(12)C labeling. It provides inter-residue correlations between (13)C(alpha) resonances of residue i and adjacent C(alpha)s at positions i - 1 and i + 1. Furthermore, longer mixing times yield correlations to C(alpha) nuclei separated by more than one residue. The experiment also provides C(alpha)-to-sidechain correlations, some amino acid type identifications and estimates for psi dihedral angles. The power of the experiment derives from the alternate (13)C-(12)C labeling with [1,3-(13)C] glycerol or [2-(13)C] glycerol, which allows utilizing the small scalar (3)J(CC) couplings that are masked by strong (1)J(CC) couplings in uniformly (13)C labeled samples.

  5. Device for correction of the spot dimensions and its form in the measuring CRT of the MELAS automatic unit

    International Nuclear Information System (INIS)

    Kachnova, O.A.; Kryutchenko, E.V.; Utochkin, B.A.; Fedotov, V.S.

    1979-01-01

    A digital-to-analog converter is described, designed for dynamic correction of beam focusing of the measuring cathode-ray tube (CRT) of the MELAS automatic device. The described converter consists of two identical units. Every unit generates a voltage proportional to square of deviations along the X and Y axes. Output voltages of both channels are summarized by an analog adder, transformed into current and are fed to the focusing system. The computer circuit used to correct the dimensions of the CRT beam uses microcircuits with low and medium levels of integration and has the following characteristics: the maximum correcting current is 12.4 mA, the direct component of the focusing current is 0.24 A, the correcting current instability is 0.08% and the reduced temperature instability of the total focusing current is 0.004%. The employment of the converter to correct the dimension and shape of the CRT spot makes it possible to reduce the spot diameter to 18 μm at the center of the face and 22 μm at the edges of the face operating field

  6. There’s Something About Molly: The Under-Researched yet Popular Powder Form of Ecstasy in the United States

    Science.gov (United States)

    Palamar, Joseph J.

    2017-01-01

    Molly has been the street name for powder or crystalline ecstasy (3,4-methylenedioxymethamphetamine [MDMA]) in the United States since at least 2008; however, few studies have examined Molly use or included Molly in the definition of ecstasy/MDMA. Prevalence of self-reported ecstasy use is being underreported on surveys due to the lack of inclusion of “Molly”, although Molly is often so adulterated with novel psychoactive substances such as synthetic cathinones (“bath salts”) that the name “Molly” may no longer adequately represent ecstasy/MDMA. The author recommends that Molly use and Molly purity be further studied to more adequately inform prevention and harm reduction. PMID:27925866

  7. The death of marriage? The effects of new forms of legal recognition on marriage rates in the United States.

    Science.gov (United States)

    Dillender, Marcus

    2014-04-01

    Some conservative groups argue that allowing same-sex couples to marry reduces the value of marriage to opposite-sex couples. This article examines how changes in U.S. legal recognition laws occurring between 1995 and 2010 designed to include same-sex couples have altered marriage rates in the United States. Using a difference-in-differences strategy that compares how marriage rates change after legal recognition in U.S. states that alter legal recognition versus states that do not, I find no evidence that allowing same-sex couples to marry reduces the opposite-sex marriage rate. Although the opposite-sex marriage rate is unaffected by same-sex couples marrying, it decreases when domestic partnerships are available to opposite-sex couples.

  8. A Low Viscosity Lunar Magma Ocean Forms a Stratified Anorthitic Flotation Crust With Mafic Poor and Rich Units: Lunar Magma Ocean Viscosity

    Energy Technology Data Exchange (ETDEWEB)

    Dygert, Nick [Department of Geological Sciences, Jackson School of Geosciences, University of Texas at Austin, Austin TX USA; Planetary Geosciences Institute, Department of Earth and Planetary Sciences, University of Tennessee, Knoxville, Knoxville TN USA; Lin, Jung-Fu [Department of Geological Sciences, Jackson School of Geosciences, University of Texas at Austin, Austin TX USA; Marshall, Edward W. [Department of Geological Sciences, Jackson School of Geosciences, University of Texas at Austin, Austin TX USA; Kono, Yoshio [HPCAT, Geophysical Laboratory, Carnegie Institution of Washington, Argonne IL USA; Gardner, James E. [Department of Geological Sciences, Jackson School of Geosciences, University of Texas at Austin, Austin TX USA

    2017-11-21

    Much of the lunar crust is monomineralic, comprising >98% plagioclase. The prevailing model argues the crust accumulated as plagioclase floated to the surface of a solidifying lunar magma ocean (LMO). Whether >98% pure anorthosites can form in a flotation scenario is debated. An important determinant of the efficiency of plagioclase fractionation is the viscosity of the LMO liquid, which was unconstrained. Here we present results from new experiments conducted on a late LMO-relevant ferrobasaltic melt. The liquid has an exceptionally low viscosity of 0.22 $+0.11\\atop{-0.19}$to 1.45 $+0.46\\atop{-0.82}$ Pa s at experimental conditions (1,300–1,600°C; 0.1–4.4 GPa) and can be modeled by an Arrhenius relation. Extrapolating to LMO-relevant temperatures, our analysis suggests a low viscosity LMO would form a stratified flotation crust, with the oldest units containing a mafic component and with very pure younger units. Old, impure crust may have been buried by lower crustal diapirs of pure anorthosite in a serial magmatism scenario.

  9. Supramolecular architecture in a co-crystal of the N(7—H tautomeric form of N6-benzoyladenine with adipic acid (1/0.5

    Directory of Open Access Journals (Sweden)

    Robert Swinton Darious

    2016-06-01

    Full Text Available The asymmetric unit of the title co-crystal, C12H9N5O·0.5C6H10O4, consists of one molecule of N6-benzoyladenine (BA and one half-molecule of adipic acid (AA, the other half being generated by inversion symmetry. The dihedral angle between the adenine and phenyl ring planes is 26.71 (7°. The N6-benzoyladenine molecule crystallizes in the N(7—H tautomeric form with three non-protonated N atoms. This tautomeric form is stabilized by intramolecular N—H...O hydrogen bonding between the carbonyl (C=O group and the N(7—H hydrogen atom on the Hoogsteen face of the purine ring, forming an S(7 ring motif. The two carboxyl groups of adipic acid interact with the Watson–Crick face of the BA molecules through O—H...N and N—H...O hydrogen bonds, generating an R22(8 ring motif. The latter units are linked by N—H...N hydrogen bonds, forming layers parallel to (10-5. A weak C—H...O hydrogen bond is also present, linking adipic acid molecules in neighbouring layers, enclosing R22(10 ring motifs and forming a three-dimensional structure. C=O...π and C—H...π interactions are also present in the structure.

  10. Numerical modelling and experimental studies of thermal behaviour of building integrated thermal energy storage unit in a form of a ceiling panel

    International Nuclear Information System (INIS)

    Jaworski, Maciej; Łapka, Piotr; Furmański, Piotr

    2014-01-01

    Highlights: • A new concept of heat storage in ventilation ducts is described. • Ceiling panel as a part of ventilation system is made of a composite with PCM. • A set-up for experimental investigation of heat storage unit was built. • Numerical model of heat transfer in the storage unit was developed. • Numerical code was validated on the base of experimental measurements. - Abstract: Objective: The paper presents a new concept of building integrated thermal energy storage unit and novel mathematical and numerical models of its operation. This building element is made of gypsum based composite with microencapsulated PCM. The proposed heat storage unit has a form of a ceiling panel with internal channels and is, by assumption, incorporated in a ventilation system. Its task is to reduce daily variations of ambient air temperature through the absorption (and subsequent release) of heat in PCM, without additional consumption of energy. Methods: The operation of the ceiling panel was investigated experimentally on a special set-up equipped with temperature sensors, air flow meter and air temperature control system. Mathematical and numerical models of heat transfer and fluid flow in the panel account for air flow in the panel as well as real thermal properties of the PCM composite, i.e.: thermal conductivity variation with temperature and hysteresis of enthalpy vs. temperature curves for heating and cooling. Proposed novel numerical simulator consists of two strongly coupled sub models: the first one – 1D – which deals with air flowing through the U-shaped channel and the second one – 3D – which deals with heat transfer in the body of the panel. Results: Spatial and temporal air temperature variations, measured on the experimental set-up, were used to validate numerical model as well as to get knowledge of thermal performance of the panel operating in different conditions. Conclusion: Preliminary results of experimental tests confirmed the ability of

  11. Teaching Form as Form

    DEFF Research Database (Denmark)

    Keiding, Tina Bering

    2012-01-01

    understanding of form per se, or, to use an expression from this text, of form as form. This challenge can be reduced to one question: how can design teaching support students in achieving not only the ability to recognize and describe different form-related concepts in existing design (i.e. analytical...

  12. Surface morphology of laser tracks used for forming the non-smooth biomimetic unit of 3Cr2W8V steel under different processing parameters

    International Nuclear Information System (INIS)

    Zhang Zhihui; Zhou Hong; Ren Luquan; Tong Xin; Shan Hongyu; Li Xianzhou

    2008-01-01

    Aiming to form the high quality of non-smooth biomimetic unit, the influence of laser processing parameters (pulse energy, pulse duration, frequency and scanning speed in the present work) on the surface morphology of scanned tracks was studied based on the 3Cr2W8V die steel. The evolution of the surface morphology was explained according to the degree of melting and vaporization of surface material, and the trend of mean surface roughness and maximum peak-to-valley height. Cross-section morphology revealed the significant microstructural characteristic of the laser-treated zone used for forming the functional zone on the biomimetic surface. Results showed that the combination of pulse energy and pulse duration plays a major role in determining the local height difference on the irradiated surface and the occurrence of melting or vaporization. While frequency and scanning speed have a minor effect on the change of the surface morphology, acting mainly by the different overlapping amount and overlapping mode. The mechanisms behind these influences were discussed, and schematic drawings were introduced to describe the mechanisms

  13. Tuning cofactor redox potentials: the 2-methoxy dihedral angle generates a redox potential difference of >160 mV between the primary (Q(A)) and secondary (Q(B)) quinones of the bacterial photosynthetic reaction center.

    Science.gov (United States)

    Taguchi, Alexander T; Mattis, Aidas J; O'Malley, Patrick J; Dikanov, Sergei A; Wraight, Colin A

    2013-10-15

    Only quinones with a 2-methoxy group can act simultaneously as the primary (QA) and secondary (QB) electron acceptors in photosynthetic reaction centers from Rhodobacter sphaeroides. (13)C hyperfine sublevel correlation measurements of the 2-methoxy in the semiquinone states, SQA and SQB, were compared with quantum mechanics calculations of the (13)C couplings as a function of the dihedral angle. X-ray structures support dihedral angle assignments corresponding to a redox potential gap (ΔEm) between QA and QB of ~180 mV. This is consistent with the failure of a ubiquinone analogue lacking the 2-methoxy to function as QB in mutant reaction centers with a ΔEm of ≈160-195 mV.

  14. Recent advances on glass-forming systems driven far from equilibrium. Special issue marking the completion of the Research Unit FOR 1394 `Nonlinear response to probe vitrification'

    Science.gov (United States)

    Fuchs, Matthias

    2017-08-01

    The nature of the glass transition is one of the frontier questions in Statistical Physics and Materials Science. Highly cooperative structural processes develop in glass-forming melts exhibiting relaxational dynamics which is spread out over many decades in time. While considerable progress has been made in recent decades towards understanding dynamical slowing-down in quiescent systems, the interplay of glassy dynamics with external fields reveals a wealth of novel phenomena yet to be explored. This special issue focuses on recent results obtained by the Research Unit FOR 1394 `Nonlinear response to probe vitrification' which was funded by the German Science Foundation (DFG). In the projects of the research unit, strong external fields were used in order to gain insights into the complex structural and transport phenomena at the glass transition under far-from-equilibrium conditions. This aimed inter alia to test theories of the glass transition developed for quiescent systems by pushing them beyond their original regime. Combining experimental, simulational, and theoretical efforts, the eight projects within the FOR 1394 measured and determined aspects of the nonlinear response of supercooled metallic, polymeric, and silica melts, of colloidal dispersions, and of ionic liquids. Applied fields included electric and mechanic fields, and forced active probing (`micro-rheology'), where a single probe is forced through the glass-forming host. Nonlinear stress-strain and force-velocity relations as well as nonlinear dielectric susceptibilities and conductivities were observed. While the physical manipulation of melts and glasses is interesting in its own right, especially technologically, the investigations performed by the FOR 1394 suggest to use the response to strong homogeneous and inhomogeneous fields as technique to explore on the microscopic level the cooperative mechanisms in dense melts of strongly interacting constituents. Questions considered concern the

  15. Supra-molecular architecture in a co-crystal of the N(7)-H tautomeric form of N (6)-benzoyl-adenine with adipic acid (1/0.5).

    Science.gov (United States)

    Swinton Darious, Robert; Thomas Muthiah, Packianathan; Perdih, Franc

    2016-06-01

    The asymmetric unit of the title co-crystal, C12H9N5O·0.5C6H10O4, consists of one mol-ecule of N (6)-benzoyl-adenine (BA) and one half-mol-ecule of adipic acid (AA), the other half being generated by inversion symmetry. The dihedral angle between the adenine and phenyl ring planes is 26.71 (7)°. The N (6)-benzoyl-adenine mol-ecule crystallizes in the N(7)-H tautomeric form with three non-protonated N atoms. This tautomeric form is stabilized by intra-molecular N-H⋯O hydrogen bonding between the carbonyl (C=O) group and the N(7)-H hydrogen atom on the Hoogsteen face of the purine ring, forming an S(7) ring motif. The two carboxyl groups of adipic acid inter-act with the Watson-Crick face of the BA mol-ecules through O-H⋯N and N-H⋯O hydrogen bonds, generating an R 2 (2)(8) ring motif. The latter units are linked by N-H⋯N hydrogen bonds, forming layers parallel to (10-5). A weak C-H⋯O hydrogen bond is also present, linking adipic acid mol-ecules in neighbouring layers, enclosing R (2) 2(10) ring motifs and forming a three-dimensional structure. C=O⋯π and C-H⋯π inter-actions are also present in the structure.

  16. [The effects of an aroma candy on oral Candida albicans colony-forming units (CFU) and oral hygiene states in healthy elderly carrying Candida albicans].

    Science.gov (United States)

    Suzuki, Motofumi; Hayama, Kazumi; Takahashi, Miki; Ezawa, Kunio; Yamazaki, Masatoshi; Matsukawa, Taiji; Kishi, Akinobu; Satou, Nobuya; Abe, Shigeru

    2015-01-01

    In a preceding paper, we showed that aroma candy containing oligonol, capric acid, and cinnamon (cassia) powder had potent inhibitory activity against mycelial growth of Candida albicans in vitro and protective activity against murine oral candidiasis. In order to assess the effects of this candy (the test candy) on oral C. albicans colony-forming units (CFU) and oral hygiene states, a placebo-controlled double-blind crossover comparative study was performed. Twenty subjects were divided into two groups. One group ingested the test candy in the first 7 days followed by 2 weeks washing-off period, then ingested the placebo candy (control candy) for 7 days. The other group was vice versa. C. albicans CFU in all oral rinse samples from the subjects before and after 7 days ingestion of candy was measured. The degree of oral malodor in all subjects was monitored using a portable measuring instrument. The results showed no statistically significant difference between test-candy group and placebo group for C. albicans CFU. However, C. albicans CFU in test-candy group with>4,000 CFUs was significantly decreased after 7 days ingestion of test-candy (poral malodor in the test-candy group was significantly decreased after 7 days ingestion of test-candy (poral hygiene states indicated that in the test-candy group, oral malodor, glutinous feeling, and refreshing feeling significantly improved in comparison with control-candy group (poral health care of elderly carrying C. albicans.

  17. Comparative study of 5-fluorouracil and its derivative, N1-(2'-tetrahydrofuryl)-5-fluorouracil on endogenous colony forming units in spleens of mice

    International Nuclear Information System (INIS)

    Ueno, Yori

    1976-01-01

    The effect of intraperitoneal injection of N 1 -(2'-tetrahydrofuryl)-5-fluorouracil (FT-207) which is metabolized to 5-fluorouracil (5-FU) in vivo, on endogeneous colony forming units in the spleen (endogeneous CFU-s) was observed and compared with that of 5-FU. The 8 x 10 -4 m eqv of FT-207 injected in mice 20 minutes before x-rays irradiation of 450 rads suppressed the endogeneous CFU-s count to about 60% and about 5.5 x 10 -5 m eqv of 5-FU had the same effect. The suppression of FT-207 continued over 120 minutes and increased gradually. The effect of 5-FU was strong shortly after the injection but faded out for 120 minutes. FT-207 had almost no effect on the recovery constant (Blair) of endogeneous CFU-s for 3 days, whereas 5-FU reduced seriously, especially for the first 2 days. The differences in the effects of both compounds could not be explained on the base of the only differences in the metabolism of both compounds. (auth.)

  18. Do different standard plate counting (IDF/ISSO or AOAC) methods interfere in the conversion of individual bacteria counts to colony forming units in raw milk?

    Science.gov (United States)

    Cassoli, L D; Lima, W J F; Esguerra, J C; Da Silva, J; Machado, P F; Mourão, G B

    2016-10-01

    This study aimed to establish the correlation between individual bacterial count (IBC) obtained by flow cytometry and the number of colony forming units (CFU) determined by standard plate count (SPC) in raw milk using two different reference methodologies: the methodology of the International Dairy Federation (IDF) - International Organization for Standardization (ISO) 4833, incubation for 72 h at 30°C and the methodology of the Association of Official Analytical Chemists (AOAC), incubation for 48 h at 35°C. For this, 100 bovine milk samples (80 ml) from different farms were collected in a sterile bottle and maintained refrigerated at 4°C and were delivered to the laboratory. In the laboratory, the samples were divided into two vials of 40 ml each. Then, half of the vials were forwarded for the SPC analysis, and the other half were analysed using the equipment BactoScan FC. The analyses by flow cytometry and SPC were performed at the same time (maximum deviation of +/- 1 h). To transform the data from IBC ml(-1) to CFU ml(-1) (IDF or AOAC methodology), a standard linear regression equation was used, as recommended by IDF/ISO-196. The difference between the reference methodologies affects the equation that transforms IBC into CFU and therefore the accuracy of the results. The results estimated by the equation using the ISO 4833 methodology were on average 0·18 log units higher than the results estimated using the equation using the AOAC methodology. After the comparison of the methodologies, it was concluded that there is an impact of the reference methodologies on the conversion of the results from IBC to CFU. Depending on the methodology adopted by each laboratory or country, there may not be equivalence in the results. Hence, the laboratories specialized in milk quality analysis that have changed their methodology for analysis, passing from the MAPA (AOAC) methodology to the IDF standard, need to develop new conversion equations to make their

  19. Design of the environment of care for safety of patients and personnel: does form follow function or vice versa in the intensive care unit?

    Science.gov (United States)

    Bartley, Judene; Streifel, Andrew J

    2010-08-01

    We review the context of the environment of care in the intensive care unit setting in relation to patient safety and quality, specifically addressing healthcare-associated infection issues and solutions involving interdisciplinary teams. Issues addressed include current and future architectural design and layout trends, construction trends affecting intensive care units, and prevention of construction-associated healthcare-associated infections related to airborne and waterborne risks and design solutions. Specific elements include single-occupancy, acuity-scalable intensive care unit rooms; environmental aspects of hand hygiene, such as water risks, sink design/location, human waste management, surface selection (floor covering, countertops, furniture, and equipment) and cleaning, antimicrobial-treated or similar materials, ultraviolet germicidal irradiation, specialized rooms (airborne infection isolation and protective environments), and water system design and strategies for safe use of potable water and mitigation of water intrusion. Effective design and operational use of the intensive care unit environment of care must engage critical care personnel from initial planning and design through occupancy of the new/renovated intensive care unit as part of the infection control risk assessment team. The interdisciplinary infection control risk assessment team can address key environment of care design features to enhance the safety of intensive care unit patients, personnel, and visitors. This perspective will ensure the environment of care supports human factors and behavioral aspects of the interaction between the environment of care and its occupants.

  20. Supra-molecular hydrogen-bonding patterns in the N(9)-H protonated and N(7)-H tautomeric form of an N(6) -benzoyl-adenine salt: N (6)-benzoyl-adeninium nitrate.

    Science.gov (United States)

    Karthikeyan, Ammasai; Jeeva Jasmine, Nithianantham; Thomas Muthiah, Packianathan; Perdih, Franc

    2016-02-01

    In the title molecular salt, C12H10N5O(+)·NO3 (-), the adenine unit has an N (9)-protonated N(7)-H tautomeric form with non-protonated N(1) and N(3) atoms. The dihedral angle between the adenine ring system and the phenyl ring is 51.10 (10)°. The typical intra-molecular N(7)-H⋯O hydrogen bond with an S(7) graph-set motif is also present. The benzoyl-adeninium cations also form base pairs through N-H⋯O and C-H⋯N hydrogen bonds involving the Watson-Crick face of the adenine ring and the C and O atoms of the benzoyl ring of an adjacent cation, forming a supra-molecular ribbon with R 2 (2)(9) rings. Benzoyl-adeninum cations are also bridged by one of the oxygen atoms of the nitrate anion, which acts as a double acceptor, forming a pair of N-H⋯O hydrogen bonds to generate a second ribbon motif. These ribbons together with π-π stacking inter-actions between the phenyl ring and the five- and six-membered adenine rings of adjacent mol-ecules generate a three-dimensional supra-molecular architecture.

  1. CACA-TOCSY with alternate {sup 13}C-{sup 12}C labeling: a {sup 13}C{sup {alpha}} direct detection experiment for mainchain resonance assignment, dihedral angle information, and amino acid type identification

    Energy Technology Data Exchange (ETDEWEB)

    Takeuchi, Koh [National Institute of Advanced Industrial Science and Technology (AIST), Biomedicinal Information Research Center (BIRC) (Japan); Frueh, Dominique P.; Sun, Zhen-Yu J.; Hiller, Sebastian; Wagner, Gerhard, E-mail: gerhard_wagner@hms.harvard.ed [Harvard Medical School, Department of Biological Chemistry and Molecular Pharmacology (United States)

    2010-05-15

    We present a {sup 13}C direct detection CACA-TOCSY experiment for samples with alternate {sup 13}C-{sup 12}C labeling. It provides inter-residue correlations between {sup 13}C{sup {alpha}} resonances of residue i and adjacent C{sup {alpha}s} at positions i - 1 and i + 1. Furthermore, longer mixing times yield correlations to C{sup {alpha}} nuclei separated by more than one residue. The experiment also provides C{sup {alpha}}-to-side chain correlations, some amino acid type identifications and estimates for {psi} dihedral angles. The power of the experiment derives from the alternate {sup 13}C-{sup 12}C labeling with [1,3-{sup 13}C] glycerol or [2-{sup 13}C] glycerol, which allows utilizing the small scalar {sup 3}J{sub CC} couplings that are masked by strong {sup 1}J{sub CC} couplings in uniformly {sup 13}C labeled samples.

  2. Adapting the forms of yesterday to the functions of today and the needs of tomorrow: a genealogical case study of clinical teaching units in Canada.

    Science.gov (United States)

    Schrewe, Brett; Pratt, Daniel D; McKellin, William H

    2016-05-01

    Emergent discourses of social responsibility and accountability have in part fuelled the expansion of distributed medical education (DME). In addition to its potential for redressing physician maldistribution, DME has conferred multiple unexpected educational benefits. In several countries, its recent rise has occurred around the boundaries of traditional medical education practices. Canada has been no exception, with DME proliferating against a backdrop of its longstanding central node, the clinical teaching unit (CTU). The CTU first appeared just over 50 years ago with its position in Canadian health care largely taken-for-granted. Given the increasing prominence of DME, however, it is timely to reconsider what the place of tertiary centre-based practices such as the CTU might be in shifting medical education systems. From a genealogical perspective, it becomes clear that the CTU did not just "happen". Rather, its creation was made possible by multiple interrelated cultural, social, and political changes in Canadian society that, while subtle, are powerfully influential. Making them visible offers a better opportunity to harmonize the benefits of longstanding entities such as the CTU with novel practices such as DME. In so doing, the medical education field may sidestep the pitfalls of investing significant resources that may only produce superficial changes while unwittingly obstructing deeper transformations and improvements. Although this work is refracted through a Canadian prism, reconceptualizing the overall design of medical education systems to take advantage of both tradition and innovation is a persistent challenge across the international spectrum, resistant to tests of time and constraints of context.

  3. Novel HIV-1 recombinants spreading across multiple risk groups in the United Kingdom: the identification and phylogeography of Circulating Recombinant Form (CRF 50_A1D.

    Directory of Open Access Journals (Sweden)

    Geraldine M Foster

    Full Text Available An increase in non-B HIV-1 infections among men who have sex with men (MSM in the United Kingdom (UK has created opportunities for novel recombinants to arise and become established. We used molecular mapping to characterize the importance of such recombinants to the UK HIV epidemic, in order to gain insights into transmission dynamics that can inform control strategies.A total of 55,556 pol (reverse transcriptase and protease sequences in the UK HIV Drug Resistance Database were analyzed using Subtype Classification Using Evolutionary Algorithms (SCUEAL. Overall 72 patients shared the same A1/D recombination breakpoint in pol, comprising predominantly MSM but also heterosexuals and injecting drug users (IDUs. In six MSM, full-length single genome amplification of plasma HIV-1 RNA was performed in order to characterize the A1/D recombinant. Subtypes and recombination breakpoints were identified using sliding window and jumping profile hidden markov model approaches. Global maximum likelihood trees of gag, pol and env genes were drawn using FastTree version 2.1. Five of the six strains showed the same novel A1/D recombinant (8 breakpoints, which has been classified as CRF50_A1D. The sixth strain showed a complex CRF50_A1D/B/U structure. Divergence dates and phylogeographic inferences were determined using Bayesian Evolutionary Analysis using Sampling Trees (BEAST. This estimated that CRF50_A1D emerged in the UK around 1992 in MSM, with subsequent transmissions to heterosexuals and IDUs. Analysis of CRF50_A1D/B/U demonstrated that around the year 2000 CRF50_A1D underwent recombination with a subtype B strain.We report the identification of CRF50_A1D, a novel circulating recombinant that emerged in UK MSM around 1992, with subsequent onward transmission to heterosexuals and IDUs, and more recent recombination with subtype B. These findings highlight the changing dynamics of HIV transmission in the UK and the converging of the two previously

  4. Magic clusters and (2x1) local structure formed in a half-unit cell of the Si(1 1 1)-(7x7) surface by Tl adsorption

    International Nuclear Information System (INIS)

    Kocan, P.; Visikovskiy, A.V.; Ohira, Y.; Yoshimura, M.; Ueda, K.; Tochihara, H.

    2008-01-01

    Formation of a (2x1) local structure is found at submonolayer growth of Tl on the Si(1 1 1)-(7x7) surface by means of scanning tunneling microscopy (STM). At low coverages, the (7x7) grid remains and the (2x1) structure is formed inside of the half-unit cells of the (7x7). The (2x1) coexists with other structures, such as of 'magic' clusters observed in the case of all other group III metals. Based on our STM observations we propose an atomic arrangement of the (2x1) structure

  5. Psychometric Properties of the Kidney Disease Quality of Life 36-Item Short-Form Survey (KDQOL-36) in the United States.

    Science.gov (United States)

    Peipert, John D; Bentler, Peter M; Klicko, Kristi; Hays, Ron D

    2018-04-01

    The Centers for Medicare & Medicaid Services require that dialysis patients' health-related quality of life be assessed annually. The primary instrument used for this purpose is the Kidney Disease Quality of Life 36-Item Short-Form Survey (KDQOL-36), which includes the SF-12 as its generic core and 3 kidney disease-targeted scales: Burden of Kidney Disease, Symptoms and Problems of Kidney Disease, and Effects of Kidney Disease. Despite its broad use, there has been limited evaluation of KDQOL-36's psychometric properties. Secondary analyses of data collected by the Medical Education Institute to evaluate the reliability and factor structure of the KDQOL-36 scales. KDQOL-36 responses from 70,786 dialysis patients in 1,381 US dialysis facilities that permitted data analysis were collected from June 1, 2015, through May 31, 2016, as part of routine clinical assessment. We assessed the KDQOL-36 scales' internal consistency reliability and dialysis facility-level reliability using coefficient alpha and 1-way analysis of variance. We evaluated the KDQOL-36's factor structure using item-to-total scale correlations and confirmatory factor analysis. Construct validity was examined using correlations between SF-12 and KDQOL-36 scales and "known groups" analyses. Each of the KDQOL-36's kidney disease-targeted scales had acceptable internal consistency reliability (α=0.83-0.85) and facility-level reliability (r=0.75-0.83). Item-scale correlations and a confirmatory factor analysis model evidenced the KDQOL-36's original factor structure. Construct validity was supported by large correlations between the SF-12 Physical Component Summary and Mental Component Summary (r=0.40-0.52) and the KDQOL-36 scale scores, as well as significant differences on the scale scores between patients receiving different types of dialysis, diabetic and nondiabetic patients, and patients who were employed full-time versus not. Use of secondary data from a clinical registry. The study provides

  6. (EOI) Form

    International Development Research Centre (IDRC) Digital Library (Canada)

    Dorine Odongo

    COLLABORATING TECHNICAL AGENCIES: EXPRESSION OF INTEREST FORM. • Please read the information provided about the initiative and the eligibility requirements in the Prospectus before completing this application form. • Ensure all the sections of the form are accurately completed and saved in PDF format.

  7. Modular forms

    NARCIS (Netherlands)

    Edixhoven, B.; van der Geer, G.; Moonen, B.; Edixhoven, B.; van der Geer, G.; Moonen, B.

    2008-01-01

    Modular forms are functions with an enormous amount of symmetry that play a central role in number theory, connecting it with analysis and geometry. They have played a prominent role in mathematics since the 19th century and their study continues to flourish today. Modular forms formed the

  8. Acinetobacter baumannii K13 and K73 capsular polysaccharides differ only in K-unit side branches of novel non-2-ulosonic acids: di-N-acetylated forms of either acinetaminic acid or 8-epiacinetaminic acid.

    Science.gov (United States)

    Kenyon, Johanna J; Kasimova, Anastasiya A; Notaro, Anna; Arbatsky, Nikolay P; Speciale, Immacolata; Shashkov, Alexander S; De Castro, Cristina; Hall, Ruth M; Knirel, Yuriy A

    2017-11-27

    Structures of capsular polysaccharides of Acinetobacter baumannii isolates carrying KL13 and KL73 gene clusters were established. The closely related KL73 and KL13 gene clusters differ only by one gene in the module responsible for synthesis of the non-2-ulosonic acids. The K13 and K73 polysaccharides differ only in a single side-chain sugar, which is either 5,7-diacetamido-3,5,7,9-tetradeoxy-l-glycero-l-altro- or -d-glycero-l-altro-non-2-ulosonic acid [di-N-acetylated forms of acinetaminic acid (Aci5Ac7Ac) or 8-epiacinetaminic acid (8eAci5Ac7Ac), respectively]. The KL13 also is closely related to the KL12 gene cluster, which contains a different wzy gene encoding the K unit polymerase. Accordingly, the otherwise near identical K units are linked differently via an α-d-FucpNAc-(1 → 4)-d-Galp linkage in K13 and K73 or an α-d-FucpNAc-(1 → 3)-d-GalpNAc linkage in K12. This finding confirms the predicted substrate of the ItrB3 initiating transferase as d-FucpNAc. Glycosyltransferases predicted to catalyse the linkage of d-Galp or d-GalpNAc to l-FucpNAc in the growing K13 and K73 or K12 units, respectively, differ by only two amino acids. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Analysing mass balance of viruses in a coagulation-ceramic microfiltration hybrid system by a combination of the polymerase chain reaction (PCR) method and the plaque forming units (PFU) method.

    Science.gov (United States)

    Matsushita, T; Matsui, Y; Shirasaki, N

    2006-01-01

    Virus removal experiments using river water spiked with bacteriophages were conducted by an in-line coagulation-ceramic microfiltration hybrid system to investigate the effects of filtration flux (62.5 and 125 L/(m2 x h)) and type of virus (Qbeta and MS2) on virus removal. In addition, the mass balance of viruses through the hybrid system was analysed by quantifying the infectious and inactive viruses by a combination of the polymerase chain reaction (PCR) method and the plaque forming units (PFU) method. Even when the system was operated at high filtration flux (125 L/(m2 x h)), high virus removal (> 6 log) with short coagulation time (2.4 s) was successfully achieved by dosing polyaluminium chloride (PACI) at more than 1.08 mg-Al/L. Removal performances were different between Qbeta and MS2, although their diameters are almost the same: greater virus removal was achieved for MS2 at PACI dosing of 0.54 mg-Al/L, and for Qbeta at PACI dosing of more than 1.08 mg-Al/L. The combination of the PCR and PFU methods revealed that two phenomena, adsorption to/entrapment in aluminium floc and virucidal activity of PACI, partially account for the high virus removal in the coagulation-MF hybrid system.

  10. Comparative evaluation of rotary ProTaper, Profile, and conventional stepback technique on reduction in Enterococcus faecalis colony-forming units and vertical root fracture resistance of root canals.

    Science.gov (United States)

    Singla, Mamta; Aggarwal, Vivek; Logani, Ajay; Shah, Naseem

    2010-03-01

    The purpose of this in vitro study was to evaluate the effect of various root canal instrumentation techniques with different instrument tapers on cleaning efficacy and resultant vertical root fracture (VRF) strength of the roots. Fifty human mandibular first premolar roots were enlarged to ISO size 20, inoculated with Enterococcus faecalis [ATCC2912] for 72 hours and divided into 5 groups: group I: prepared with .02 taper hand instruments ISO size 40; group II: Profile .04 taper size 40; group III: Profile .06 taper size 40; group IV: ProTaper size F4; and group V (control group) further divided into: Va: with bacterial inoculation and no mechanical instrumentation; and Group Vb: neither bacterial inoculation nor mechanical instrumentation. Cleaning efficacy was evaluated in terms of reduction of colony forming units (CFUs). The VRF strength was evaluated using D11 spreader as wedge in an Instron testing machine. Root canals instrumented with ProTaper and 6% Profile instruments showed maximum reduction in CFUs, with statistically insignificant difference between them. The VRF resistance decreased in all instrumented groups. The difference of VRF between 2% and 4% taper Profile groups was statistically insignificant (P = .195). One-way analysis of variance showed that canals instrumented with ProTaper F4 showed maximum reduction in VRF resistance compared with control uninstrumented group. Profile 6% taper instruments offer the advantage of maximum debridement without significant reduction in root fracture resistance. Copyright 2010 Mosby, Inc. All rights reserved.

  11. Contributor Form

    Directory of Open Access Journals (Sweden)

    Chief Editor

    2014-09-01

    to produce preprints or reprints and translate into languages other than English for sale or free distribution; and 4 the right to republish the work in a collection of articles in any other mechanical or electronic format. We give the rights to the corresponding author to make necessary changes as per the request of the journal, do the rest of the correspondence on our behalf and he/she will act as the guarantor for the manuscript on our behalf. All persons who have made substantial contributions to the work reported in the manuscript, but who are not contributors, are named in the Acknowledgment and have given me/us their written permission to be named. If I/we do not include an Acknowledgment that means I/we have not received substantial contributions from non-contributors and no contributor has been omitted.S NoAuthors' NamesContribution (IJCME Guidelines{1 substantial contributions to conception and design, acquisition of data, or analysis and interpretation of data; 2 drafting the article or revising it critically for important intellectual content; and 3 final approval of the version to be published. Authors should meet conditions 1, 2, and 3}.SignatureDate                              Note: All the authors are required to sign independently in this form in the sequence given above. In case an author has left the institution/country and whose whereabouts are not known, the senior author may sign on his/her behalf taking the responsibility.No addition/deletion/ or any change in the sequence of the authorship will be permissible at a later stage, without valid reasons and permission of the Editor.If the authorship is contested at any stage, the article will be either returned or will not be processed for publication till the issue is solved.Maximum up to 4 authors for short communication and up to 6 authors for original article.

  12. Contributors Form

    Directory of Open Access Journals (Sweden)

    Chief Editor

    2016-06-01

    to produce preprints or reprints and translate into languages other than English for sale or free distribution; and 4 the right to republish the work in a collection of articles in any other mechanical or electronic format. We give the rights to the corresponding author to make necessary changes as per the request of the journal, do the rest of the correspondence on our behalf and he/she will act as the guarantor for the manuscript on our behalf. All persons who have made substantial contributions to the work reported in the manuscript, but who are not contributors, are named in the Acknowledgment and have given me/us their written permission to be named. If I/we do not include an Acknowledgment that means I/we have not received substantial contributions from non-contributors and no contributor has been omitted.S NoAuthors' NamesContribution (IJCME Guidelines{1 substantial contributions to conception and design, acquisition of data, or analysis and interpretation of data; 2 drafting the article or revising it critically for important intellectual content; and 3 final approval of the version to be published. Authors should meet conditions 1, 2, and 3}.SignatureDate                              Note: All the authors are required to sign independently in this form in the sequence given above. In case an author has left the institution/country and whose whereabouts are not known, the senior author may sign on his/her behalf taking the responsibility.No addition/deletion/ or any change in the sequence of the authorship will be permissible at a later stage, without valid reasons and permission of the Editor.If the authorship is contested at any stage, the article will be either returned or will not be processed for publication till the issue is solved.Maximum up to 4 authors for short communication and up to 6 authors for original article.

  13. Densified waste form and method for forming

    Science.gov (United States)

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2015-08-25

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  14. Image forming apparatus

    DEFF Research Database (Denmark)

    2005-01-01

    An image H(x, y) for displaying a target image G(x, y) is displayed on a liquid-crystal display panel and illumination light from an illumination light source is made to pass therethrough to form an image on a PALSLM. Read light hv is radiated to the PALSLM and a phase-modulated light image alpha...... (x, y) read out of the PALSLM is subjected to Fourier transform by a lens. A phase contrast filter gives a predetermined phase shift to only the zero-order light component of Fourier light image alpha f(x, y). The phase-shifted light image is subjected to inverse Fourier transform by a lens...... to project an output image O(x, y) to an output plane. A light image O'(x, y) branched by a beam sampler is picked up by a pickup device and an evaluation value calculating unit evaluates conformity between the image O(x, y) and the image G(x, y).; A control unit performs feedback control of optical...

  15. Interface unit

    NARCIS (Netherlands)

    Keyson, D.V.; Freudenthal, A.; De Hoogh, M.P.A.; Dekoven, E.A.M.

    2001-01-01

    The invention relates to an interface unit comprising at least a display unit for communication with a user, which is designed for being coupled with a control unit for at least one or more parameters in a living or working environment, such as the temperature setting in a house, which control unit

  16. A general method for the derivation of the functional forms of the effective energy terms in coarse-grained energy functions of polymers. II. Backbone-local potentials of coarse-grained O 1 →4 -bonded polyglucose chains

    Science.gov (United States)

    Lubecka, Emilia A.; Liwo, Adam

    2017-09-01

    Based on the theory of the construction of coarse-grained force fields for polymer chains described in our recent work [A. K. Sieradzan et al., J. Chem. Phys. 146, 124106 (2017)], in this work effective coarse-grained potentials, to be used in the SUGRES-1P model of polysaccharides that is being developed in our laboratory, have been determined for the O ⋯O ⋯O virtual-bond angles (θ ) and for the dihedral angles for rotation about the O ⋯O virtual bonds (γ ) of 1 → 4 -linked glucosyl polysaccharides, for all possible combinations of [α ,β ]-[d,l]-glucose. The potentials of mean force corresponding to the virtual-bond angles and the virtual-bond dihedral angles were calculated from the free-energy surfaces of [α ,β ]-[d,l]-glucose pairs, determined by umbrella-sampling molecular-dynamics simulations with the AMBER12 force field, or combinations of the surfaces of two pairs sharing the overlapping residue, respectively, by integrating the respective Boltzmann factor over the dihedral angles λ for the rotation of the sugar units about the O ⋯O virtual bonds. Analytical expressions were subsequently fitted to the potentials of mean force. The virtual-bond-torsional potentials depend on both virtual-bond-dihedral angles and virtual-bond angles. The virtual-bond-angle potentials contain a single minimum at about θ =14 0° for all pairs except β -d-[α ,β ] -l-glucose, where the global minimum is shifted to θ =150° and a secondary minimum appears at θ =90°. The torsional potentials favor small negative γ angles for the α -d-glucose and extended negative angles γ for the β -d-glucose chains, as observed in the experimental structures of starch and cellulose, respectively. It was also demonstrated that the approximate expression derived based on Kubo's cluster-cumulant theory, whose coefficients depend on the identity of the disugar units comprising a trisugar unit that defines a torsional potential, fits simultaneously all

  17. Harmonic Maass forms and mock modular forms

    CERN Document Server

    Bringmann, Kathrin; Ono, Ken

    2017-01-01

    Modular forms and Jacobi forms play a central role in many areas of mathematics. Over the last 10-15 years, this theory has been extended to certain non-holomorphic functions, the so-called "harmonic Maass forms". The first glimpses of this theory appeared in Ramanujan's enigmatic last letter to G. H. Hardy written from his deathbed. Ramanujan discovered functions he called "mock theta functions" which over eighty years later were recognized as pieces of harmonic Maass forms. This book contains the essential features of the theory of harmonic Maass forms and mock modular forms, together with a wide variety of applications to algebraic number theory, combinatorics, elliptic curves, mathematical physics, quantum modular forms, and representation theory.

  18. On good ETOL forms

    DEFF Research Database (Denmark)

    Skyum, Sven

    1978-01-01

    This paper continues the study of ETOL forms and good EOL forms done by Maurer, Salomaa and Wood. It is proven that binary very complete ETOL forms exist, good synchronized ETOL forms exist and that no propagating or synchronized ETOL form can be very complete.......This paper continues the study of ETOL forms and good EOL forms done by Maurer, Salomaa and Wood. It is proven that binary very complete ETOL forms exist, good synchronized ETOL forms exist and that no propagating or synchronized ETOL form can be very complete....

  19. Spray-formed tooling

    Science.gov (United States)

    McHugh, K. M.; Key, J. F.

    The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be designed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

  20. Allocating multiple units

    DEFF Research Database (Denmark)

    Tranæs, Torben; Krishna, Kala

    2002-01-01

    This paper studies the allocation and rent distribution in multi-unit, combinatorial-bid auctions under complete information. We focus on the natural multi-unit analogue of the first-price auction, where buyers bid total payments, pay their bids, and where the seller allocates goods to maximize his...... auction, which is the multi unit analogue of a second-price auction. Furthermore, we characterize these equilibria when valuations take a number of different forms: diminishing marginal valuations, increasing average valuations, and marginal valuations with single turning points...

  1. Electroweak form factors

    International Nuclear Information System (INIS)

    Singh, S.K.

    2002-01-01

    The present status of electroweak nucleon form factors and the N - Δ transition form factors is reviewed. Particularly the determination of dipole mass M A in the axial vector form factor is discussed

  2. Generating Units

    Data.gov (United States)

    Department of Homeland Security — Generating Units are any combination of physically connected generators, reactors, boilers, combustion turbines, and other prime movers operated together to produce...

  3. A generalized definition for waste form durability

    International Nuclear Information System (INIS)

    Fanning, T. H.; Bauer, T. H.; Morris, E. E.; Wigeland, R. A.

    2002-01-01

    When evaluating waste form performance, the term ''durability'' often appears in casual discourse, but in the technical literature, the focus is often on waste form ''degradation'' in terms of mass lost per unit area per unit time. Waste form degradation plays a key role in developing models of the long-term performance in a repository environment, but other factors also influence waste form performance. These include waste form geometry; density, porosity, and cracking; the presence of cladding; in-package chemistry feedback; etc. The paper proposes a formal definition of waste form ''durability'' which accounts for these effects. Examples from simple systems as well as from complex models used in the Total System Performance Assessment of Yucca Mountain are provided. The application of ''durability'' in the selection of bounding models is also discussed

  4. Adaptive municipal electronic forms

    NARCIS (Netherlands)

    Kuiper, Pieternel; van Dijk, Elisabeth M.A.G.; Bondarouk, Tatiana; Ruel, Hubertus Johannes Maria; Guiderdoni-Jourdain, Karine; Oiry, Ewan

    Adaptation of electronic forms (e-forms) seems to be a step forward to reduce the burden for people who fill in forms. Municipalities more and more offer e-forms online that can be used by citizens to request a municipal product or service or by municipal employees to place a request on behalf of a

  5. Forming Spirals From Shadows

    Science.gov (United States)

    Kohler, Susanna

    2016-07-01

    What causes the large-scale spiral structures found in some protoplanetary disks? Most models assume theyre created by newly-forming planets, but a new study suggests that planets might have nothing to do with it.Perturbations from Planets?In some transition disks protoplanetary disks with gaps in their inner regions weve directly imaged large-scale spiral arms. Many theories currently attribute the formation of these structures to young planets: either the direct perturbations of a planet embedded in the disk cause the spirals, or theyre indirectly caused by the orbit of a planetary body outside of the arms.Another example of spiral arms detected in a protoplanetary disk, MWC 758. [NASA/ESA/ESO/M. Benisty et al.]But what if you could get spirals without any planets? A team of scientists led by Matas Montesinos (University of Chile) have recently published a study in which they examine what happens to a shadowed protoplanetary disk.Casting Shadows with WarpsIn the teams setup, they envision a protoplanetary disk that is warped: the inner region is slightly tilted relative to the outer region. As the central star casts light out over its protoplanetary disk, this disk warping would cause some regions of the disk to be shaded in a way that isnt axially symmetric with potentially interesting implications.Montesinos and collaborators ran 2D hydrodynamics simulations to determine what happens to the motion of particles within the disk when they pass in and out of the shadowed regions. Since the shadowed regions are significantly colder than the illuminated disk, the pressure in these regions is much lower. Particles are therefore accelerated and decelerated as they pass through these regions, and the lack of axial symmetry causes spiral density waves to form in the disk as a result.Initial profile for the stellar heating rate per unit area for one of the authors simulations. The regions shadowed as a result of the disk warp subtend 0.5 radians each (shown on the left

  6. Against Logical Form

    Directory of Open Access Journals (Sweden)

    P N Johnson-Laird

    2010-10-01

    Full Text Available An old view in logic going back to Aristotle is that an inference is valid in virtue of its logical form. Many psychologists have adopted the same point of view about human reasoning: the first step is to recover the logical form of an inference, and the second step is to apply rules of inference that match these forms in order to prove that the conclusion follows from the premises. The present paper argues against this idea. The logical form of an inference transcends the grammatical forms of the sentences used to express it, because logical form also depends on context. Context is not readily expressed in additional premises. And the recovery of logical form leads ineluctably to the need for infinitely many axioms to capture the logical properties of relations. An alternative theory is that reasoning depends on mental models, and this theory obviates the need to recover logical form.

  7. Forms of Arthritis

    Science.gov (United States)

    ... this page please turn Javascript on. Forms of Arthritis Past Issues / Fall 2006 Table of Contents Today, ... of Linda Saisselin Osteoarthritis (OA) — the form of arthritis typically occurring during middle or old age, this ...

  8. Forms Management Policy

    Science.gov (United States)

    To establish EPA’s Forms Management Program; to describe the requisite roles, responsibilities, and procedures necessary for the successful management of EPA forms; and to more clearly fulfill EPA’s obligations in this regard.

  9. Unit Manning

    National Research Council Canada - National Science Library

    McGinniss, Mike

    2003-01-01

    .... This decision combines two crucial initiatives: first, transforming the Army from an individual soldier replacement system to a unit manning system that enhances cohesion and keeps trained soldiers, leaders, and commanders together longer, thereby...

  10. Detector Unit

    CERN Multimedia

    1960-01-01

    Original detector unit of the Instituut voor Kernfysisch Onderzoek (IKO) BOL project. This detector unit shows that silicon detectors for nuclear physics particle detection were already developed and in use in the 1960's in Amsterdam. Also the idea of putting 'strips' onto the silicon for high spatial resolution of a particle's impact on the detector were implemented in the BOL project which used 64 of these detector units. The IKO BOL project with its silicon particle detectors was designed, built and operated from 1965 to roughly 1977. Detector Unit of the BOL project: These detectors, notably the ‘checkerboard detector’, were developed during the years 1964-1968 in Amsterdam, The Netherlands, by the Natuurkundig Laboratorium of the N.V. Philips Gloeilampen Fabrieken. This was done in close collaboration with the Instituut voor Kernfysisch Onderzoek (IKO) where the read-out electronics for their use in the BOL Project was developed and produced.

  11. FORMS OF YOUTH TRAVEL

    OpenAIRE

    Moisã Claudia Olimpia; Moisã Claudia Olimpia

    2011-01-01

    Taking into account the suite of motivation that youth has when practicing tourism, it can be said that the youth travel takes highly diverse forms. These forms are educational tourism, volunteer programs and “work and travel”, cultural exchanges or sports tourism and adventure travel. In this article, we identified and analyzed in detail the main forms of youth travel both internationally and in Romania. We also illustrated for each form of tourism the specific tourism products targeting you...

  12. Drilling unit

    Energy Technology Data Exchange (ETDEWEB)

    Umanchik, N P; Demin, A V; Khrustalev, N N; Linnik, G N; Lovchev, S V; Rozin, M M; Sidorov, R V; Sokolov, S I; Tsaregradskiy, Yu P

    1981-01-01

    A drilling unit is proposed which includes a hydraulic lifter, hydraulic multiple-cylinder pump with valve distribution and sectional drilling pump with separators of the working and flushing fluid. In order to reduce metal consumption and the overall dimensions of the drilling unit, the working cavity of each cylinder of the hydraulic multiple-cylinder pump is equipped with suction and injection valves and is hydraulically connected to the working cavity by one of the sections of the drilling pump.

  13. Unified form language

    DEFF Research Database (Denmark)

    Alnæs, Martin S.; Logg, Anders; Ølgaard, Kristian Breum

    2014-01-01

    We present the Unied Form Language (UFL), which is a domain-specic language for representing weak formulations of partial dierential equations with a view to numerical approximation. Features of UFL include support for variational forms and functionals, automatic dierentiation of forms and expres...... libraries to generate concrete low-level implementations. Some application examples are presented and libraries that support UFL are highlighted....

  14. Method for forming ammonia

    Science.gov (United States)

    Kong, Peter C.; Pink, Robert J.; Zuck, Larry D.

    2008-08-19

    A method for forming ammonia is disclosed and which includes the steps of forming a plasma; providing a source of metal particles, and supplying the metal particles to the plasma to form metal nitride particles; and providing a substance, and reacting the metal nitride particles with the substance to produce ammonia, and an oxide byproduct.

  15. Mesonic Form Factors

    Energy Technology Data Exchange (ETDEWEB)

    Frederic D. R. Bonnet; Robert G. Edwards; George T. Fleming; Randal Lewis; David Richards

    2003-07-22

    We have started a program to compute the electromagnetic form factors of mesons. We discuss the techniques used to compute the pion form factor and present preliminary results computed with domain wall valence fermions on MILC asqtad lattices, as well as Wilson fermions on quenched lattices. These methods can easily be extended to rho-to-gamma-pi transition form factors.

  16. 77 FR 24207 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2012-04-23

    ... dogs upon arrival to the United States are also requested. The CDC form 75.37, ``Notice of Importers of Dogs'' will now be identified as CDC form 75.37 ``NOTICE TO OWNERS AND IMPORTERS OF DOGS: Requirement for Dog Confinement.'' The form has been changed to enhance clarity around the purpose of the form...

  17. Forms of Life, Forms of Reality

    Directory of Open Access Journals (Sweden)

    Piergiorgio Donatelli

    2015-10-01

    Full Text Available The article explores aspects of the notion of forms of life in the Wittgensteinian tradition especially following Iris Murdoch’s lead. On the one hand, the notion signals the hardness and inexhaustible character of reality, as the background needed in order to make sense of our lives in various ways. On the other, the hardness of reality is the object of a moral work of apprehension and deepening to the point at which its distinctive character dissolves into the family of connections we have gained for ourselves. The two movements of thought are connected and necessary.

  18. Micro metal forming

    CERN Document Server

    2013-01-01

    Micro Metal Forming, i. e. forming of parts and features with dimensions below 1 mm, is a young area of research in the wide field of metal forming technologies, expanding the limits for applying metal forming towards micro technology. The essential challenges arise from the reduced geometrical size and the increased lot size. In order to enable potential users to apply micro metal forming in production, information about the following topics are given: tribological behavior: friction between tool and work piece as well as tool wear mechanical behavior: strength and formability of the work piece material, durability of the work pieces size effects: basic description of effects occurring due to the fact, that the quantitative relation between different features changes with decreasing size process windows and limits for forming processes tool making methods numerical modeling of processes and process chains quality assurance and metrology All topics are discussed with respect to the questions relevant to micro...

  19. Gravitation and quadratic forms

    International Nuclear Information System (INIS)

    Ananth, Sudarshan; Brink, Lars; Majumdar, Sucheta; Mali, Mahendra; Shah, Nabha

    2017-01-01

    The light-cone Hamiltonians describing both pure (N=0) Yang-Mills and N=4 super Yang-Mills may be expressed as quadratic forms. Here, we show that this feature extends to theories of gravity. We demonstrate how the Hamiltonians of both pure gravity and N=8 supergravity, in four dimensions, may be written as quadratic forms. We examine the effect of residual reparametrizations on the Hamiltonian and the resulting quadratic form.

  20. Three forms of relativity

    International Nuclear Information System (INIS)

    Strel'tsov, V.N.

    1992-01-01

    The physical sense of three forms of the relativity is discussed. The first - instant from - respects in fact the traditional approach based on the concept of instant distance. The normal form corresponds the radar formulation which is based on the light or retarded distances. The front form in the special case is characterized by 'observable' variables, and the known method of k-coefficient is its obvious expression. 16 refs

  1. Neutron electromagnetic form factors

    International Nuclear Information System (INIS)

    Finn, J.M.; Madey, R.; Eden, T.; Markowitz, P.; Rutt, P.M.; Beard, K.; Anderson, B.D.; Baldwin, A.R.; Keane, D.; Manley, D.M.; Watson, J.W.; Zhang, W.M.; Kowalski, S.; Bertozzi, W.; Dodson, G.; Farkhondeh, M.; Dow, K.; Korsch, W.; Tieger, D.; Turchinetz, W.; Weinstein, L.; Gross, F.; Mougey, J.; Ulmer, P.; Whitney, R.; Reichelt, T.; Chang, C.C.; Kelly, J.J.; Payerle, T.; Cameron, J.; Ni, B.; Spraker, M.; Barkhuff, D.; Lourie, R.; Verst, S.V.; Hyde-Wright, C.; Jiang, W.-D.; Flanders, B.; Pella, P.; Arenhoevel, H.

    1992-01-01

    Nucleon form factors provide fundamental input for nuclear structure and quark models. Current knowledge of neutron form factors, particularly the electric form factor of the neutron, is insufficient to meet these needs. Developments of high-duty-factor accelerators and polarization-transfer techniques permit new experiments that promise results with small sensitivities to nuclear models. We review the current status of the field, our own work at the MIT/Bates linear accelerator, and future experimental efforts

  2. Gravitation and quadratic forms

    Energy Technology Data Exchange (ETDEWEB)

    Ananth, Sudarshan [Indian Institute of Science Education and Research,Pune 411008 (India); Brink, Lars [Department of Physics, Chalmers University of Technology,S-41296 Göteborg (Sweden); Institute of Advanced Studies and Department of Physics & Applied Physics,Nanyang Technological University,Singapore 637371 (Singapore); Majumdar, Sucheta [Indian Institute of Science Education and Research,Pune 411008 (India); Mali, Mahendra [School of Physics, Indian Institute of Science Education and Research,Thiruvananthapuram, Trivandrum 695016 (India); Shah, Nabha [Indian Institute of Science Education and Research,Pune 411008 (India)

    2017-03-31

    The light-cone Hamiltonians describing both pure (N=0) Yang-Mills and N=4 super Yang-Mills may be expressed as quadratic forms. Here, we show that this feature extends to theories of gravity. We demonstrate how the Hamiltonians of both pure gravity and N=8 supergravity, in four dimensions, may be written as quadratic forms. We examine the effect of residual reparametrizations on the Hamiltonian and the resulting quadratic form.

  3. Electronic Capitalization Asset Form -

    Data.gov (United States)

    Department of Transportation — National Automated Capitalization Authorization Form used by ATO Engineering Services, Logistics, Accounting for the purpose of identifying and capturing FAA project...

  4. Forming of superplastic ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Lesuer, D.R.; Wadsworth, J.; Nieh, T.G.

    1994-05-01

    Superplasticity in ceramics has now advanced to the stage that technologically viable superplastic deformation processing can be performed. In this paper, examples of superplastic forming and diffusion bonding of ceramic components are given. Recent work in biaxial gas-pressure forming of several ceramics is provided. These include yttria-stabilized, tetragonal zirconia (YTZP), a 20% alumina/YTZP composite, and silicon. In addition, the concurrent superplastic forming and diffusion bonding of a hybrid ceramic-metal structure are presented. These forming processes offer technological advantages of greater dimensional control and increased variety and complexity of shapes than is possible with conventional ceramic shaping technology.

  5. Cooperative Station History Forms

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Various forms, photographs and correspondence documenting the history of Cooperative station instrumentation, location changes, inspections, and...

  6. Mechanical strainer unit

    International Nuclear Information System (INIS)

    Kraeling, J.B.; Netkowicz, R.J.; Schnall, I.H.

    1983-01-01

    The mechanical strainer unit is connected to a flanged conduit which originates in and extends out of a suppression chamber in a nuclear reactor. The strainer includes a plurality of centrally apertured plates positioned along a common central axis and in parallel and spaced relationship. The plates have a plurality of bores radially spaced about the central axis. Spacer means such as washers are positioned between adjacent plates to maintain the plates is spaced relationship and form communicating passages of a predetermined size to the central apertures. Connecting means such as bolts or studs extend through the aligned bores to maintain the unit in assembled relationship and secure the unit to the pipe. By employing perforated plates and blocking off certain of the communicating passages, a dual straining effect can be achieved

  7. [Conservation Units.

    Science.gov (United States)

    Texas Education Agency, Austin.

    Each of the six instructional units deals with one aspect of conservation: forests, water, rangeland, minerals (petroleum), and soil. The area of the elementary school curriculum with which each correlates is indicated. Lists of general and specific objectives are followed by suggested teaching procedures, including ideas for introducing the…

  8. Giro form reading machine

    Science.gov (United States)

    Minh Ha, Thien; Niggeler, Dieter; Bunke, Horst; Clarinval, Jose

    1995-08-01

    Although giro forms are used by many people in daily life for money remittance in Switzerland, the processing of these forms at banks and post offices is only partly automated. We describe an ongoing project for building an automatic system that is able to recognize various items printed or written on a giro form. The system comprises three main components, namely, an automatic form feeder, a camera system, and a computer. These components are connected in such a way that the system is able to process a bunch of forms without any human interactions. We present two real applications of our system in the field of payment services, which require the reading of both machine printed and handwritten information that may appear on a giro form. One particular feature of giro forms is their flexible layout, i.e., information items are located differently from one form to another, thus requiring an additional analysis step to localize them before recognition. A commercial optical character recognition software package is used for recognition of machine-printed information, whereas handwritten information is read by our own algorithms, the details of which are presented. The system is implemented by using a client/server architecture providing a high degree of flexibility to change. Preliminary results are reported supporting our claim that the system is usable in practice.

  9. PowerForms

    DEFF Research Database (Denmark)

    Brabrand, Claus; Møller, Anders; Ricky, Mikkel

    2000-01-01

    All uses of HTML forms may benefit from validation of the specified input field values. Simple validation matches individual values against specified formats, while more advanced validation may involve interdependencies of form fields. There is currently no standard for specifying or implementing...

  10. Mastering HTML5 forms

    CERN Document Server

    Gupta, Gaurav

    2013-01-01

    This tutorial will show you how to create stylish forms, not only visually appealing, but interactive and customized, in order to gather valuable user inputs and information.Enhance your skills in building responsive and dynamic web forms using HTML5, CSS3, and related technologies. All you need is a basic understanding of HTML and PHP.

  11. Soil Forming Factors

    Science.gov (United States)

    It! What is Soil? Chip Off the Old Block Soil Forming Factors Matters of Life and Death Underneath It All Wise Choices A World of Soils Soil Forming Factors 2 A Top to Bottom Guide 3 Making a Soil Monolith 4 Soil Orders 5 State Soil Monoliths 6 Where in the Soil World Are You? >> A Top to

  12. Method for forming materials

    Science.gov (United States)

    Tolle, Charles R [Idaho Falls, ID; Clark, Denis E [Idaho Falls, ID; Smartt, Herschel B [Idaho Falls, ID; Miller, Karen S [Idaho Falls, ID

    2009-10-06

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  13. Package materials, waste form

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    The schedules for waste package development for the various host rocks were presented. The waste form subtask activities were reviewed, with the papers focusing on high-level waste, transuranic waste, and spent fuel. The following ten papers were presented: (1) Waste Package Development Approach; (2) Borosilicate Glass as a Matrix for Savannah River Plant Waste; (3) Development of Alternative High-Level Waste Forms; (4) Overview of the Transuranic Waste Management Program; (5) Assessment of the Impacts of Spent Fuel Disassembly - Alternatives on the Nuclear Waste Isolation System; (6) Reactions of Spent Fuel and Reprocessing Waste Forms with Water in the Presence of Basalt; (7) Spent Fuel Stabilizer Screening Studies; (8) Chemical Interactions of Shale Rock, Prototype Waste Forms, and Prototype Canister Metals in a Simulated Wet Repository Environment; (9) Impact of Fission Gas and Volatiles on Spent Fuel During Geologic Disposal; and (10) Spent Fuel Assembly Decay Heat Measurement and Analysis

  14. Getting in-formed

    DEFF Research Database (Denmark)

    Hansbøl, Mikala

    det vi undersøger på form gennem vores beskrivelser. Paperet tager afsæt i empiriske eksempler fra et postdoc projekt om et såkaldt 'serious game' - Mingoville. Projektet følger circuleringer og etableringer af Mingoville 'på en global markedsplads'. I paperet diskuteres hvordan vi som forskere samler....../performer de fænomener vi forsker i. Aktør-Netværks-Teoretiker Bruno Latour (2005) pointerer at enhver beskrivelse også er en form for forklaring. En form for forklaring, der putter ting ind i et skript og dermed også putter ting på form. Paperet diskuterer to tilgange til at gøre serious games og derved skabe viden om...... engagementer med disse fænomener i serious games forskning: experimentel og etnografisk....

  15. NOAA Form 370 Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains information from submitted NOAA Form 370s, also known as the Fisheries Certificate of Origin, for imported shipments of frozen and/or processed...

  16. MAPS Appraisal Report Form

    CERN Multimedia

    HR Department

    2005-01-01

    As announced in Weekly Bulletin 48/2004, from now onwards, the paper MAPS appraisal report form has been replaced by an electronic form, which is available via EDH (on the EDH desktop under Other Tasks / HR & Training) No changes have been made to the contents of the form. Practical information will be available on the web page http://cern.ch/ais/projs/forms/maps/info.htm, and information meetings will be held on the following dates: 18 January 2005: MAIN AUDITORIUM (500-1-001) from 14:00 to 15:30. 20 January 2005: AB AUDITORIUM II (864-1-D02) from14:00 to 15:30. 24 January 2005: AT AUDITORIUM (30-7-018) from 10:00 to 11:30. Human Resources Department Tel. 73566

  17. VMS forms Output Tables

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These output tables contain parsed and format validated data from the various VMS forms that are sent from any given vessel, while at sea, from the VMS devices on...

  18. Science on form

    International Nuclear Information System (INIS)

    Ishizaka, Shozo; Kato, Yoshihiro; Takaki, Ryuji; Toriwaki, Jun-ichiro

    1987-01-01

    The purpose of the Symposium was to discuss interdisciplinal science aspects of form. 'Form' depends on the material and the changes. But, it is the form that appears evident at once and endures. Form is absorbed from every field as media of information. One part of the work covers the description of non-periodic phenomena, morphogenesis or evolution. Irreducible stubborn facts as diseases or social problems, or whatever else that could not be analyzed are integrally challenged to be systematized by computer simulation. The other part covers the finding of laws for determining how systems behave. Attention should be paid to pattern recognition, image processing and pattern formation. The Symposium proceeded with no parallel sessions, and participants from various fields made exciting discussions in an interdisciplinal atmosphere. (Auth.)

  19. Access Customized Forms

    OpenAIRE

    Cosma Emil; Jeflea Victor

    2010-01-01

    By using Word, Excel or PowerPoint one can automate routine operations using the VBA language (Visual Basic for Applications). This language is also used in Access, allowing access to data stored in tables or queries. Thus, Access and VBA resources can be used together. Access is designed for programming forms and reports (among other things), so there won’t be found any of the VBA editor’s specific forms.

  20. Polyphony and verb forms

    Directory of Open Access Journals (Sweden)

    Jelena Rajić

    2012-12-01

    Full Text Available This paper examines some special uses of indicative and subjunctive verb forms in Spanish, which contemporary linguistics explains using the notions of polyphony, evidentials, echoic representation, quotatives, etc. These terms, even though they refer to different characteristics and belong to different theoretical frameworks, share one common feature: they all refer to diverse linguistic forms (discourse markers, linguistic negation, quotatives, echoic utterances, etc. characterized by the presence and interaction of different voices or points of view in one discourse sequence. In this study we are interested in a description of quotative or polyphonic meanings expressed by specific verb forms and tenses, the imperfect and the conditional, and also by indicative forms in subordinate substantive clauses with a negative main verb and by subjunctive forms in subordinate concessive clauses. Our research focuses on the analysis of the linguistic conditions that make possible the evidential use of the conditional, the imperfect and the echoic (metarepresentative interpretation of indicative and subjunctive forms in the above-mentioned contexts. The examples we discuss show that evidential and echoic interpretations are inferential meanings derived from the extralinguistic situation and the knowledge that speakers have of the world.

  1. Forms of global governence

    Directory of Open Access Journals (Sweden)

    Maxim V. Kharkevich

    2014-01-01

    Full Text Available Global governance as a concept defines the meaning of contemporary world politics both as a discipline and as reality. Interdependent and globalized world requires governance, and a global government has not been formed yet. The theoretical possibility of global governance without global government is proved and justified. The purpose of this article is to analytically identify possible forms of global governance. Three such forms of global governance are identified: hierarchical, market and network. In a hierarchy the governance is due to the asymmetry of power between the parties. Market control happens via anonymous pricing mechanism. Network, in contrast to the market is characterized by a closer value link between the actors, but unlike the hierarchical relationship actors are free to leave the network. Global governance takes three forms and is being implemented by different actors. To determine the most efficient form of global governance is impossible. Efficiency depends on the match between a form and an object of government. It should be noted that meta governance is likely to remain a monopoly of institutionally strong states in global governance.

  2. New marine science organization formed

    Science.gov (United States)

    Wooster, Warren S.

    A new international organization, the North Pacific Marine Science Organization (PICES) will be established to promote and coordinate marine scientific research in the northern North Pacific Ocean and the Berlin Sea. This was decided in Ottawa on December 12, 1990, when a draft convention was approved by representatives of Canada, China, Japan, the United States, and the Soviet Union. PICES will focus on research on the ocean environment and its interactions with land and atmosphere, its role and response to global weather and climate change, its flora, fauna and ecosystems, its uses and resources, and impacts upon it from human activities. Such studies relate not only to the effects of fishing and environmental change on fish stocks but also to such issues as the impacts of oil spills and other forms of pollution and the eventual consequences of climate change for uses of the ocean and its resources.

  3. Comparative waste forms study

    International Nuclear Information System (INIS)

    Wald, J.W.; Lokken, R.O.; Shade, J.W.; Rusin, J.M.

    1980-12-01

    A number of alternative process and waste form options exist for the immobilization of nuclear wastes. Although data exists on the characterization of these alternative waste forms, a straightforward comparison of product properties is difficult, due to the lack of standardized testing procedures. The characterization study described in this report involved the application of the same volatility, mechanical strength and leach tests to ten alternative waste forms, to assess product durability. Bulk property, phase analysis and microstructural examination of the simulated products, whose waste loading varied from 5% to 100% was also conducted. The specific waste forms investigated were as follows: Cold Pressed and Sintered PW-9 Calcine; Hot Pressed PW-9 Calcine; Hot Isostatic Pressed PW-9 Calcine; Cold Pressed and Sintered SPC-5B Supercalcine; Hot Isostatic pressed SPC-5B Supercalcine; Sintered PW-9 and 50% Glass Frit; Glass 76-68; Celsian Glass Ceramic; Type II Portland Cement and 10% PW-9 Calcine; and Type II Portland Cement and 10% SPC-5B Supercalcine. Bulk property data were used to calculate and compare the relative quantities of waste form volume produced at a spent fuel processing rate of 5 metric ton uranium/day. This quantity ranged from 3173 L/day (5280 Kg/day) for 10% SPC-5B supercalcine in cement to 83 L/day (294 Kg/day) for 100% calcine. Mechanical strength, volatility, and leach resistance tests provide data related to waste form durability. Glass, glass-ceramic and supercalcine ranked high in waste form durability where as the 100% PW-9 calcine ranked low. All other materials ranked between these two groupings

  4. Microcontroller Unit

    International Nuclear Information System (INIS)

    Tulaev, A.B.

    1994-01-01

    The general purpose micro controller unit based on 8-bit single-chip microcomputer of the MCS-51 family is described. The controller has the data and program memories, a serial interface and an external bus for functional I/O extensions. The controller consists of a microcomputer chip, up to 4 ROM-RAM chips and 10 SSI and MSI chips, and it measures 160x120 mm. Both hardware and software micro system debugging tools are described. (author). 8 refs., 1 fig., 1 tab

  5. Chemical forms of radioiodine

    International Nuclear Information System (INIS)

    Tachikawa, Enzo

    1979-01-01

    Release of radioiodine built-up during reactor operations presents a potential problem from the standpoint of environmental safety. Among the chemical forms of radioiodine, depending upon the circumstances, organic iodides cast a most serious problem because of its difficulties in the trapping and because of its stability compared to other chemical forms. Furthermore, pellet-cladding interaction (PCl) fuel failures in LWR fuel rods are believed to be stress corrosion cracks caused by embrittling fission product species, radioiodine. To deal with these problems, knowledge is required on the chemical behaviors of radioiodine in and out of fuels, as well as the release behaviors from fuels. Here a brief review is given of these respects, in aiming at clearing-up the questions still remaining unknown. The data seem to indicate that radioiodine exists as a combined form in fuels. upon heating slightly irradiated fuels, the iodine atoms are released in a chemical form associated with uranium atoms. Experiments, however, as needed with specimen of higher burnup, where the interactions of radioiodine with metallic fission products could be favored. The dominant release mechanism of radioiodine under normal operating temperatures will be diffusion to grain boundaries leading to open surfaces. Radiation-induced internal traps, however, after the rate of diffusion significantly. The carbon sources of organic iodides formed under various conditions and its formation mechanisms have also been considered. (author)

  6. Image forming apparatus

    DEFF Research Database (Denmark)

    2005-01-01

    (x, y) read out of the PALSLM is subjected to Fourier transform by a lens. A phase contrast filter gives a predetermined phase shift to only the zero-order light component of Fourier light image alpha f(x, y). The phase-shifted light image is subjected to inverse Fourier transform by a lens...... to project an output image O(x, y) to an output plane. A light image O'(x, y) branched by a beam sampler is picked up by a pickup device and an evaluation value calculating unit evaluates conformity between the image O(x, y) and the image G(x, y).; A control unit performs feedback control of optical...

  7. Advanced waste forms from spent nuclear fuel

    International Nuclear Information System (INIS)

    Ackerman, J.P.; McPheeters, C.C.

    1995-01-01

    More than one hundred spent nuclear fuel types, having an aggregate mass of more than 5000 metric tons (2700 metric tons of heavy metal), are stored by the United States Department of Energy. This paper proposes a method for converting this wide variety of fuel types into two waste forms for geologic disposal. The method is based on a molten salt electrorefining technique that was developed for conditioning the sodium-bonded, metallic fuel from the Experimental Breeder Reactor-II (EBR-II) for geologic disposal. The electrorefining method produces two stable, optionally actinide-free, high-level waste forms: an alloy formed from stainless steel, zirconium, and noble metal fission products, and a ceramic waste form containing the reactive metal fission products. Electrorefining and its accompanying head-end process are briefly described, and methods for isolating fission products and fabricating waste forms are discussed

  8. Methods for forming particles

    Science.gov (United States)

    Fox, Robert V.; Zhang, Fengyan; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin

    2016-06-21

    Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

  9. Physical forms of MIPs.

    Science.gov (United States)

    Biffis, Andrea; Dvorakova, Gita; Falcimaigne-Cordin, Aude

    2012-01-01

    The current state of the art in the development of methodologies for the preparation of MIPs in predetermined physical forms is critically reviewed, with particular attention being paid to the forms most widely employed in practical applications, such as spherical beads in the micro- to nanometer range, microgels, monoliths, membranes. Although applications of the various MIP physical forms are mentioned, the focus of the paper is mainly on the description of the various preparative methods. The aim is to provide the reader with an overview of the latest achievements in the field, as well as with a mean for critically evaluating the various proposed methodologies towards an envisaged application. The review covers the literature up to early 2010, with special emphasis on the developments of the last 10 years.

  10. Sixth form pure mathematics

    CERN Document Server

    Plumpton, C

    1968-01-01

    Sixth Form Pure Mathematics, Volume 1, Second Edition, is the first of a series of volumes on Pure Mathematics and Theoretical Mechanics for Sixth Form students whose aim is entrance into British and Commonwealth Universities or Technical Colleges. A knowledge of Pure Mathematics up to G.C.E. O-level is assumed and the subject is developed by a concentric treatment in which each new topic is used to illustrate ideas already treated. The major topics of Algebra, Calculus, Coordinate Geometry, and Trigonometry are developed together. This volume covers most of the Pure Mathematics required for t

  11. Waste-form development

    International Nuclear Information System (INIS)

    Neilson, R.M. Jr.; Colombo, P.

    1982-01-01

    Contemporary solidification agents are being investigated relative to their applications to major fuel cycle and non-fuel cycle low-level waste (LLW) streams. Work is being conducted to determine the range of conditions under which these solidification agents can be applied to specific LLW streams. These studies are directed primarily towards defining operating parameters for both improved solidification of problem wastes and solidification of new LLW streams generated from advanced volume reduction technologies. Work is being conducted to measure relevant waste form properties. These data will be compiled and evaluated to demonstrate compliance with waste form performance and shallow land burial acceptance criteria and transportation requirements

  12. Many Forms of Culture

    Science.gov (United States)

    Cohen, Adam B.

    2009-01-01

    Psychologists interested in culture have focused primarily on East-West differences in individualism-collectivism, or independent-interdependent self-construal. As important as this dimension is, there are many other forms of culture with many dimensions of cultural variability. Selecting from among the many understudied cultures in psychology,…

  13. Inequalities for Differential Forms

    CERN Document Server

    Agarwal, Ravi P

    2009-01-01

    Presents a series of local and global estimates and inequalities for differential forms, in particular the ones that satisfy the A-harmonic equations. This work focuses on the Hardy-Littlewood, Poincare, Cacciooli, imbedded and reverse Holder inequalities. It is for researchers, instructors and graduate students

  14. Disconnected electromagnetic form factors

    International Nuclear Information System (INIS)

    Wilcox, Walter

    2001-01-01

    Preliminary results of a calculation of disconnected nucleon electromagnetic factors factors on the lattice are presented. The implementation of the numerical subtraction scheme is outlined. A comparison of results for electric and magnetic disconnected form factors on two lattice sizes with those of the Kentucky group is presented. Unlike previous results, the results found in this calculation are consistent with zero in these sectors

  15. Documentary form no. 1

    International Nuclear Information System (INIS)

    2002-12-01

    This first documentary form, edited by the national association of local commissions of information about nuclear activities (ANCLI), briefly presents the radioactivity phenomenon, the ionising radiations, the characteristics of radiation sources (activity, half life, energy), and the dosimetry (absorbed, equivalent, efficient doses). (J.S.)

  16. Metal forming and lubrication

    DEFF Research Database (Denmark)

    Bay, Niels

    2000-01-01

    Lubrication is essential in most metal forming processes. The lubricant film has two basic functions, [1]: i. to separate the work piece and tool surfaces and ii. to cool the workpiece and the tool. Separation of the two surfaces implies lower friction facilitating deformation and lowering the tool...

  17. Circle of Form

    DEFF Research Database (Denmark)

    Jaeger, Thomas Arvid

    2012-01-01

    a common professional language like in mathematics, colour and music. The result is a weaker professionalism in the aesthetic competences compared to the professionalism and competences in other areas. A research project [1] on contrasts or opposites in form investigated the phenomenon in the fields...

  18. Forms of Inattentiveness

    DEFF Research Database (Denmark)

    Knudsen, Morten

    2011-01-01

    and kept out of sight in the decision processes by looking at a specific case study involving the construction of a model intended to control, and render transparent, the quality of health services in Denmark. This paper outlines the forms of inattentiveness which make communication blind to information...

  19. Wars of Forms

    DEFF Research Database (Denmark)

    Clausen, Lars

    2013-01-01

    , both political and military, war between the two forms, the post-napoleonic, Fichtean notion of nationality (1807-8) and the historical notion of imperium. “Nationality” entered the political semantics witch such a force and shook the existing political order of empires to the ground because of its...

  20. Discover new cooperation forms

    International Nuclear Information System (INIS)

    Anon.

    2000-01-01

    In spite of the good forecasts concerning the supply and demand, the gas market is full of uncertainties because of the competition and the industrial reorganizing. Producers and operators try to define new forms of cooperation allowing the attainments protection and at the same time allowing to take advantage of the market opportunities with a shared risk. (A.L.B.)

  1. Personal Information Request Form

    International Development Research Centre (IDRC) Digital Library (Canada)

    PC Forms Inc. 834-4048

    To apply for information under the Privacy Act, complete this form or a written request mentioning the Act. Describe the information being sought and provide any relevant details necessary to help the. International Development Research Centre. (IDRC) find it. If you require assistance, refer to. Info Source (Sources of ...

  2. Solar unit

    Energy Technology Data Exchange (ETDEWEB)

    Sukhanov, A M; Trushevskiy, S N; Tveryanovich, E V

    1982-01-01

    A solar unit is proposed which contains an inclined solar collector with supply and outlet pipelines, the first of which is connected to the source of a heat carrier, while the second is connected through the valve to the tank for collecting heated heat carrier equipped with a device for recovery. In order to improve the effectiveness of heating the heat carrier, it additionally contains a concentrator of solar radiation and a device for maintaining a level of the heat carrier in the collector in the zone of the focal spot of the concentrator, while the heat pipeline is connected to the source of the heat carrier with the help of a device for maintaining the level of the heat carrier.

  3. Towards the first generation micro bulk forming system

    DEFF Research Database (Denmark)

    Arentoft, Mogens; Eriksen, Rasmus Solmer; Hansen, Hans Nørgaard

    2011-01-01

    . This work describes a number of prototype system units, which collectively form a desktop sized micro forming production system. The system includes a billet preparation module, an integrated transfer system, a temperature controlled forming tool, including process simulation, and a dedicated micro forming......The industrial demand for micro mechanical components has surged in the later years with the constant introduction of more integrated products. The micro bulk forming process holds a promising pledge of delivering high quality micro mechanical components at low cost and high production rates...... press. The system is demonstrated on an advanced micro forming case where a dental component is formed in medical grade Titanium....

  4. Tensegrity structures form, stability, and symmetry

    CERN Document Server

    Zhang, Jing Yao

    2015-01-01

    To facilitate a deeper understanding of tensegrity structures, this book focuses on their two key design problems: self-equilibrium analysis and stability investigation. In particular, high symmetry properties of the structures are extensively utilized. Conditions for self-equilibrium as well as super-stability of tensegrity structures are presented in detail. An analytical method and an efficient numerical method are given for self-equilibrium analysis of tensegrity structures: the analytical method deals with symmetric structures and the numerical method guarantees super-stability. Utilizing group representation theory, the text further provides analytical super-stability conditions for the structures that are of dihedral as well as tetrahedral symmetry. This book not only serves as a reference for engineers and scientists but is also a useful source for upper-level undergraduate and graduate students. Keeping this objective in mind, the presentation of the book is self-contained and detailed, with an abund...

  5. Electromagnetic form factors

    International Nuclear Information System (INIS)

    Desplanques, B.

    1987-01-01

    Electromagnetic form factors, in first approximation, are sensitive to spatial distribution of nucleons and to their current. In second approximation, more precise effects are concerned, whose role is increasing with momentum transfer and participating essentially of short range nuclei description. They concern of course the nucleon-nucleon interaction while approaching each other and keeping their free-state identity, but also mutually polarizing one the other. In this last effect, radial and orbital excitations of nucleon, the nucleon mesonic cloud modification and the nucleon antinucleon pair excitation are included. In this paper, these contributions are discussed while trying to find the important elements for a good description of form factors. Current questions are also discussed. Light nuclei are essentially concerned [fr

  6. Waste form development

    International Nuclear Information System (INIS)

    Neilson, R.M. Jr.; Colombo, P.

    1982-01-01

    In this program, contemporary solidification agents are being investigated relative to their applications to major fuel cycle and non-fuel cycle low-level waste (LLW) streams. Work is being conducted to determine the range of conditions under which these solidification agents can be applied to specific LLW streams. These studies are directed primarily towards defining operating parameters for both improved solidification of problem wastes and solidification of new LLW streams generated from advanced volume reduction technologies. Work is being conducted to measure relevant waste form properties. These data will be compiled and evaluated to demonstrate compliance with waste form performance and shallow land burial acceptance criteria and transportation requirements (both as they exist and as they are modified with time). 6 tables

  7. GRACE with FORM

    International Nuclear Information System (INIS)

    Fujimoto, J.; Ishikawa, T.; Kato, K.; Kaneko, T.; Nakazawa, N..; Shimizu, Y.; Vermaseren, J.; Yasui, Y.

    2006-01-01

    A new version of GRACE/1-loop, a system for the automatic calculation of 1-loop Feynman diagrams, has been developed after the replacement of its symbolic manipulation engine from REDUCE to FORM. This enables us the efficient memory management that is essential for the handling of a tremendous number of Feynman diagrams, so that the performance of GRACE/1-loop is significantly improved as demonstrated in the text

  8. Differential forms of supermanifolds

    International Nuclear Information System (INIS)

    Beresin, P.A.

    1979-01-01

    The theory of differential and pseUdo-differential forms on supermanifolds is constructed. The definition and notations of superanalogy of the Pontryagin and Chern characteristic classes are given. The theory considered is purely local. The scheme suggested here generalizes the so-called Weil homomorphism for superspace which lays on the basis of the Chern and Potryagin characteristic class theory. The theory can be extended to the global supermanifolds

  9. Forms of Life

    Directory of Open Access Journals (Sweden)

    Peter Hacker

    2015-10-01

    Full Text Available The phrase ‘Lebensform’ (form of life had a long and varied history prior to Wittgenstein’s use of it on a mere three occasions in the Philosophical Investigations. It is not a pivotal concept in Wittgenstein’s philosophy. But it is a minor signpost of a major reorientation of philosophy, philosophy of language and logic, and philosophy of mathematics that Wittgenstein instigated. For Wittgenstein sought to replace the conception of a language as a meaning calculus (Frege, Russell, the Tractatus by an anthropological or ethnological conception. A language is not a class of sentences that can be formed from a set of axioms (definitions, formation and transformation rules and the meanings of which is given by their truth-conditions, but an open-ended series of interlocking language-games constituting a form of life or way of living (a culture. Wittgenstein’s uses of ‘Lebensform’ and its cognates, both in the Investigations and in his Nachlass are severally analysed, and various exegetical misinterpretations are clarified.

  10. Termination unit

    Science.gov (United States)

    Traeholt, Chresten [Frederiksberg, DK; Willen, Dag [Klagshamn, SE; Roden, Mark [Newnan, GA; Tolbert, Jerry C [Carrollton, GA; Lindsay, David [Carrollton, GA; Fisher, Paul W [Heiskell, TN; Nielsen, Carsten Thidemann [Jaegerspris, DK

    2014-01-07

    This invention relates to a termination unit comprising an end-section of a cable. The end section of the cable defines a central longitudinal axis and comprising end-parts of N electrical phases, an end-part of a neutral conductor and a surrounding thermally insulation envelope adapted to comprising a cooling fluid. The end-parts of the N electrical phases and the end-part of the neutral conductor each comprising at least one electrical conductor and being arranged in the cable concentrically around a core former with a phase 1 located relatively innermost, and phase N relatively outermost in the cable, phase N being surrounded by the neutral conductor, electrical insulation being arrange between neighboring electrical phases and between phase N and the neutral conductor, and wherein the end-parts of the neutral conductor and the electrical phases each comprise a contacting surface electrically connected to at least one branch current lead to provide an electrical connection: The contacting surfaces each having a longitudinal extension, and being located sequentially along the longitudinal extension of the end-section of the cable. The branch current leads being individually insulated from said thermally insulation envelope by individual electrical insulators.

  11. Termination unit

    Energy Technology Data Exchange (ETDEWEB)

    Traeholt, Chresten; Willen, Dag; Roden, Mark; Tolbert, Jerry C.; Lindsay, David; Fisher, Paul W.; Nielsen, Carsten Thidemann

    2016-05-03

    Cable end section comprises end-parts of N electrical phases/neutral, and a thermally-insulation envelope comprising cooling fluid. The end-parts each comprises a conductor and are arranged with phase 1 innermost, N outermost surrounded by the neutral, electrical insulation being between phases and N and neutral. The end-parts comprise contacting surfaces located sequentially along the longitudinal extension of the end-section. A termination unit has an insulating envelope connected to a cryostat, special parts at both ends comprising an adapter piece at the cable interface and a closing end-piece terminating the envelope in the end-section. The special parts houses an inlet and/or outlet for cooling fluid. The space between an inner wall of the envelope and a central opening of the cable is filled with cooling fluid. The special part at the end connecting to the cryostat houses an inlet or outlet, splitting cooling flow into cable annular flow and termination annular flow.

  12. Fra tanke til form

    DEFF Research Database (Denmark)

    Der er gået 20 år siden Aalborg og Nordjylland i 1997 fik sin egen, unikke civilingeniøruddannelse i form af Arkitektur & Design-uddannelsen ved Aalborg Universitet. Hele forløbet er nu dokumenteret i en jubilæumsbog, der fortæller om hvordan uddannelsen i sin tid blev etableret; hvordan undervis...... størrelse på over 500 studerende, de fleste med daglig gang i den store CREATE-bygning på havnefronten i Aalborg....

  13. United States Navy DL Perspective

    Science.gov (United States)

    2010-08-10

    United States Navy DL Perspective CAPT Hank Reeves Navy eLearning Project Director 10 August 2010 Report Documentation Page Form ApprovedOMB No...Marine Corps (USMC) Navy eLearning Ongoing Shared with USMC, Coast Guard 9 NeL Help Site https://ile-help.nko.navy.mil/ile/ https://s-ile

  14. Bipolar pulse forming line

    Science.gov (United States)

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  15. Plural Form and Franchisors Performance : Early Empirical Findings From Europe

    OpenAIRE

    Perdreau , Frédéric; Le Nadant , Anne-Laure; Cliquet , Gérard

    2010-01-01

    This paper deals with the relationships between plural form and performance in franchising networks in Europe. It is proposed that a franchisor's life cycle stage and human capital assets influence the relationship between plural form and performance. The model has been estimated using panel data on 41 publicly listed European franchising networks in the 1998-2007 period. The proportion of network-franchised units to the total number of its units in its distribution system is used as the indi...

  16. 4,4′-Bipyridine–3-(thiophen-3-ylacrylic acid (1/2

    Directory of Open Access Journals (Sweden)

    Malaichamy Sathiyendiran

    2011-10-01

    Full Text Available In the title 1/2 adduct, C10H8N2·2C7H6O2S, the dihedral angle between the pyridine rings is 18.41 (11°. In the thiopheneacrylic acid molecules, the dihedral angles between the respective thiophene and acrylic acid units are 5.52 (17° and 23.92 (9°. In the crystal, the components are linked via O—H...N hydrogen-bonding interactions, forming units of two 3-thiopheneacrylic acid molecules and one 4,4′-bipyridine molecule.

  17. 46 CFR Sec. 6 - Surety and form of bond.

    Science.gov (United States)

    2010-10-01

    ... called the “Agent”) or the United States of America, (hereafter called the “United States”), represented... rata. Fourth. After discovery and report to the Agent or the Director of any loss hereunder, the Agent... forms furnished by the Surety. Prior discovery and report to the Agent of such loss shall not affect the...

  18. ELEMENTAL FORMS OF HOSPITALITY

    Directory of Open Access Journals (Sweden)

    Maximiliano Emanuel Korstanje

    2010-11-01

    Full Text Available Modern studies emphasized on the needs of researching the hospitality as relevant aspects of tourism and hospitality fields. Anyway, these approaches are inextricably intertwined to the industry of tourism and do not take seriously the anthropological and sociological roots of hospitality. In fact, the hotel seems to be a partial sphere of hospitality at all. Under this context, the present paper explores the issue of hospitality enrooted in the political and economic indo-European principle of free-transit which is associated to a much broader origin.  Starting from the premise etymologically hostel and hospital share similar origins, we follow the contributions of J Derrida to determine the elements that formed the hospitality up to date.

  19. Pion form factor

    Energy Technology Data Exchange (ETDEWEB)

    Ryong Ji, C.; Pang, A.; Szczepaniak, A. [North Carolina State Univ., Raleigh, NC (United States)

    1994-04-01

    It is pointed out that the correct criterion to define the legal PQCD contribution to the exclusive processes in the lightcone perturbative expansion should be based on the large off-shellness of the lightcone energy in the intermediate states. In the lightcone perturbative QCD calculation of the pion form factor, the authors find that the legal PQCD contribution defined by the lightcone energy cut saturates in the smaller Q{sup 2} region compared to that defined by the gluon four-momentum square cut. This is due to the contribution by the highly off-energy-shell gluons in the end point regions of the phase space, indicating that the gluon four-momentum-square cut may have cut too much to define the legal PQCD.

  20. Nucleon Electromagnetic Form Factors

    Energy Technology Data Exchange (ETDEWEB)

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  1. LIDAR COMBINED SCANNING UNIT

    Directory of Open Access Journals (Sweden)

    V. V. Elizarov

    2016-11-01

    Full Text Available Subject of Research. The results of lidar combined scanning unit development for locating leaks of hydrocarbons are presented The unit enables to perform high-speed scanning of the investigated space in wide and narrow angle fields. Method. Scanning in a wide angular field is produced by one-line scanning path by means of the movable aluminum mirror with a frequency of 20Hz and amplitude of 20 degrees of swing. Narrowband scanning is performed along a spiral path by the deflector. The deflection of the beam is done by rotation of the optical wedges forming part of the deflector at an angle of ±50. The control function of the scanning node is performed by a specialized software product written in C# programming language. Main Results. This scanning unit allows scanning the investigated area at a distance of 50-100 m with spatial resolution at the level of 3 cm. The positioning accuracy of the laser beam in space is 15'. The developed scanning unit gives the possibility to browse the entire investigated area for the time not more than 1 ms at a rotation frequency of each wedge from 50 to 200 Hz. The problem of unambiguous definition of the beam geographical coordinates in space is solved at the software level according to the rotation angles of the mirrors and optical wedges. Lidar system coordinates are determined by means of GPS. Practical Relevance. Development results open the possibility for increasing the spatial resolution of scanning systems of a wide range of lidars and can provide high positioning accuracy of the laser beam in space.

  2. Moon (Form-Origin)

    Science.gov (United States)

    Tsiapas, Elias; Soumelidou, Despina; Tsiapas, Christos

    2017-04-01

    When the Earth was formed, it was in a state of burning heat. As time went by, temperature on the planet's surface was falling due to radiation and heat transfer, and various components (crusts) began taking solid form at the Earth's poles. The formation of crusts took place at the Earth's poles, because the stirring of burning and fluid masses on the surface of the Earth was significantly slighter there than it was on the equator. Due to centrifugal force and Coriolis Effect, these solid masses headed towards the equator; those originating from the North Pole followed a south-western course, while those originating from the South Pole followed a north-western course and there they rotated from west to east at a lower speed than the underlying burning and liquid earth, because of their lower initial linear velocity, their solid state and inertia. Because inertia is proportional to mass, the initially larger solid body swept all new solid ones, incorporating them to its western side. The density of the new solid masses was higher, because the components on the surface would freeze and solidify first, before the underlying thicker components. As a result, the western side of the initial islet of solid rocks submerged, while the east side elevated. . As a result of the above, this initial islet began to spin in reverse, and after taking on the shape of a sphere, it formed the "heart" of the Moon. The Moon-sphere, rolling on the equator, would sink the solid rocks that continued to descend from the Earth's poles. The sinking rocks partially melted because of higher temperatures in the greater depths that the Moon descended to, while part of the rocks' mass bonded with the Moon and also served as a heat-insulating material, preventing the descended side of the sphere from melting. Combined with the Earth's liquid mass that covered its emerging eastern surface, new sphere-shaped shells were created, with increased density and very powerful structural cohesion. During the

  3. Ethyl 2-(1,2,3,4-tetrahydrospiro[carbazole-3,2′-[1,3]dioxolan]-9-ylacetate

    Directory of Open Access Journals (Sweden)

    Philipp M. G. Löffler

    2009-04-01

    Full Text Available In the title compound, C18H21NO4, the hydrogenated six-membered ring of the carbazole unit adopts a half-chair conformation. The dioxolane ring and ethylacetate substituent point to opposite sides of the carbazole plane. The ethylacetate substituent adopts an essentially fully extended conformation, and its mean plane forms a dihedral angle of 83.8 (1° with respect to the carbazole mean plane. The molecules are arranged into stacks in which the carbazole planes form a dihedral angle of 4.4 (1° and have an approximate interplanar separation of 3.6 Å.

  4. How desert varnish forms?

    Science.gov (United States)

    Perry, Randall S.; Kolb, Vera M.; Lynne, Bridget Y.; Sephton, Mark A.; Mcloughlin, Nicola; Engel, Michael H.; Olendzenski, Lorraine; Brasier, Martin; Staley, James T., Jr.

    2005-09-01

    Desert varnish is a black, manganese-rich rock coating that is widespread on Earth. The mechanism underlying its formation, however, has remained unresolved. We present here new data and an associated model for how desert varnish forms, which substantively challenges previously accepted models. We tested both inorganic processes (e.g. clays and oxides cementing coatings) and microbial methods of formation. Techniques used in this preliminary study include SEM-EDAX with backscatter, HRTEM of focused ion beam prepared (FIB) wafers and several other methods including XRPD, Raman spectroscopy, XPS and Tof-SIMS. The only hypothesis capable of explaining a high water content, the presence of organic compounds, an amorphous silica phase (opal-A) and lesser quantities of clays than previously reported, is a mechanism involving the mobilization and redistribution of silica. The discovery of silica in desert varnish suggests labile organics are preserved by interaction with condensing silicic acid. Organisms are not needed for desert varnish formation but Bacteria, Archaea, Eukarya, and other organic compounds are passively incorporated and preserved as organominerals. The rock coatings thus provide useful records of past environments on Earth and possibly other planets. Additionally this model also helps to explain the origin of key varnish and rock glaze features, including their hardness, the nature of the "glue" that binds heterogeneous components together, its layered botryoidal morphology, and its slow rate of formation.

  5. How delusion is formed?

    Science.gov (United States)

    Park, Jong Suk; Kang, Ung Gu

    2016-02-01

    Traditionally, delusions have been considered to be the products of misinterpretation and irrationality. However, some theorists have argued that delusions are normal or rational cognitive responses to abnormal experiences. That is, when a recently experienced peculiar event is more plausibly explained by an extraordinary hypothesis, confidence in the veracity of this extraordinary explanation is reinforced. As the number of such experiences, driven by the primary disease process in the perceptual domain, increases, this confidence builds and solidifies, forming a delusion. We tried to understand the formation of delusions using a simulation based on Bayesian inference. We found that (1) even if a delusional explanation is only marginally more plausible than a non-delusional one, the repetition of the same experience results in a firm belief in the delusion. (2) The same process explains the systematization of delusions. (3) If the perceived plausibility of the explanation is not consistent but varies over time, the development of a delusion is delayed. Additionally, this model may explain why delusions are not corrected by persuasion or rational explanation. This Bayesian inference perspective can be considered a way to understand delusions in terms of rational human heuristics. However, such experiences of "rationality" can lead to irrational conclusions, depending on the characteristics of the subject. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Solid state NMR sequential resonance assignments and conformational analysis of the 2x10.4 kDa dimeric form of the Bacillus subtilis protein Crh

    Energy Technology Data Exchange (ETDEWEB)

    Boeckmann, Anja [Institut de Biologie et Chimie des Proteines, C.N.R.S UMR 5086 (France)], E-mail: a.bockmann@ibcp.fr; Lange, Adam [Max-Planck-Institute for Biophysical Chemistry, Solid-state NMR (Germany); Galinier, Anne [Institut de Biologie Structurale et Microbiologie, C.N.R.S UPR 9043 (France); Luca, Sorin [Max-Planck-Institute for Biophysical Chemistry, Solid-state NMR (Germany); Giraud, Nicolas; Juy, Michel [Institut de Biologie et Chimie des Proteines, C.N.R.S UMR 5086 (France); Heise, Henrike [Max-Planck-Institute for Biophysical Chemistry, Solid-state NMR (Germany); Montserret, Roland; Penin, Francois [Institut de Biologie et Chimie des Proteines, C.N.R.S UMR 5086 (France); Baldus, Marc [Max-Planck-Institute for Biophysical Chemistry, Solid-state NMR (Germany)], E-mail: maba@mpibpc.mpg.de

    2003-12-15

    Solid state NMR sample preparation and resonance assignments of the U-[{sup 13}C,{sup 15}N] 2x10.4 kDa dimeric form of the regulatory protein Crh in microcrystalline, PEG precipitated form are presented. Intra- and interresidue correlations using dipolar polarization transfer methods led to nearly complete sequential assignments of the protein, and to 88% of all {sup 15}N, {sup 13}C chemical shifts. For several residues, the resonance assignments differ significantly from those reported for the monomeric form analyzed by solution state NMR. Dihedral angles obtained from a TALOS-based statistical analysis suggest that the microcrystalline arrangement of Crh must be similar to the domain-swapped dimeric structure of a single crystal form recently solved using X-ray crystallography. For a limited number of protein residues, a remarkable doubling of the observed NMR resonances is observed indicative of local static or dynamic conformational disorder. Our study reports resonance assignments for the largest protein investigated by solid state NMR so far and describes the conformational dimeric variant of Crh with previously unknown chemical shifts.

  7. Forms of War

    Energy Technology Data Exchange (ETDEWEB)

    Vogel, H. [Asklepios Klinik St. Georg, Roentgenabteilung, Lohmuehlenstrasse 5, 20099 Hamburg (Germany)], E-mail: Hermann.vogel@ak-stgeorg.lbk-hh.de; Bartelt, D. [Asklepios Klinik St. Georg, Roentgenabteilung, Lohmuehlenstrasse 5, 20099 Hamburg (Germany)

    2007-08-15

    Purpose: Under war conditions, employed weapons can be identified on radiographs obtained in X-ray diagnostic. The analysis of such X-ray films allows concluding that there are additional information about the conditions of transport and treatment; it shall be shown that there are X-ray findings which are typical and characteristic for certain forms of warfare. Material and method: The radiograms have been collected during thirty years; they come from hospitals, where war casualties had been treated, and personal collections. Results: The material is selected, because in war X-ray diagnostic will be limited and the interest of the opposing parties influence the access to the material; furthermore the possibilities to publish or to communicate facts and thoughts are different. Citizens of the USA, GB, France, or Israel will have easier access to journals than those of Vietnam, Chad, and Zimbabwe. Under war conditions, poor countries, like North Vietnam may develop own concepts of medical care. There are X-ray findings which are typical or even characteristic for air warfare, guerrilla warfare, gas war, desert warfare, conventional warfare, and annihilation warfare, and city guerrilla warfare/civil war. The examples demonstrate that weapons and the conditions of transport and treatment can be recognized by X-ray findings. The radiogram can be read like a document. Conclusion: In War, there are differences between a treatment and imaging diagnostic in countries, which control the air space and in those who do not. Medical care of the poor, i.e. in countries (in general those opposing the western nations) will hardly be published, and poverty has no advocate.

  8. Forms of War

    International Nuclear Information System (INIS)

    Vogel, H.; Bartelt, D.

    2007-01-01

    Purpose: Under war conditions, employed weapons can be identified on radiographs obtained in X-ray diagnostic. The analysis of such X-ray films allows concluding that there are additional information about the conditions of transport and treatment; it shall be shown that there are X-ray findings which are typical and characteristic for certain forms of warfare. Material and method: The radiograms have been collected during thirty years; they come from hospitals, where war casualties had been treated, and personal collections. Results: The material is selected, because in war X-ray diagnostic will be limited and the interest of the opposing parties influence the access to the material; furthermore the possibilities to publish or to communicate facts and thoughts are different. Citizens of the USA, GB, France, or Israel will have easier access to journals than those of Vietnam, Chad, and Zimbabwe. Under war conditions, poor countries, like North Vietnam may develop own concepts of medical care. There are X-ray findings which are typical or even characteristic for air warfare, guerrilla warfare, gas war, desert warfare, conventional warfare, and annihilation warfare, and city guerrilla warfare/civil war. The examples demonstrate that weapons and the conditions of transport and treatment can be recognized by X-ray findings. The radiogram can be read like a document. Conclusion: In War, there are differences between a treatment and imaging diagnostic in countries, which control the air space and in those who do not. Medical care of the poor, i.e. in countries (in general those opposing the western nations) will hardly be published, and poverty has no advocate

  9. 27 CFR 26.68 - Bond, Form 2898-Beer.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bond, Form 2898-Beer. 26... Liquors and Articles in Puerto Rico Bonds § 26.68 Bond, Form 2898—Beer. Where a brewer intends to withdraw, for purpose of shipment to the United States, beer of Puerto Rican manufacture from bonded storage in...

  10. 77 FR 40360 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2012-07-09

    ... Tuberculosis; Smallpox; Yellow fever; and Viral Hemorrhagic Fevers), as well as most communicable diseases in... Death Investigation Forms--Airline, Maritime, Land/Border Crossing Illness and Death Investigation Forms... arrival in the United States. An ``ill person'' is defined in statute by: --Fever (>=100 [deg]F or 38 [deg...

  11. 1 CFR 5.10 - Forms of publication.

    Science.gov (United States)

    2010-01-01

    ... 1 General Provisions 1 2010-01-01 2010-01-01 false Forms of publication. 5.10 Section 5.10 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER GENERAL § 5.10 Forms of publication. Pursuant to section 1506 of title 44, United States Code, the Administrative Committee publishes...

  12. 1 CFR 8.6 - Forms of publication.

    Science.gov (United States)

    2010-01-01

    ... 1 General Provisions 1 2010-01-01 2010-01-01 false Forms of publication. 8.6 Section 8.6 General... FEDERAL REGULATIONS § 8.6 Forms of publication. (a) Under section 1506 of title 44, United States Code, the Administrative Committee authorizes publication of the Code of Federal Regulations in the...

  13. 15 CFR 2011.105 - Form and applicability of certificate.

    Science.gov (United States)

    2010-01-01

    ..., SYRUPS AND MOLASSES Certificate of Quota Eligibility § 2011.105 Form and applicability of certificate. (a...; expected date of departure; expected date of arrival in U.S.; and expected port(s) of arrival in the United... shall affix a seal or other form of authentication and sign and date the certificate. (b) Other...

  14. 41 CFR 105-55.005 - Form of payment.

    Science.gov (United States)

    2010-07-01

    ... Administration 55-COLLECTION OF CLAIMS OWED THE UNITED STATES § 105-55.005 Form of payment. Claims may be paid in the form of money or, when a contractual basis exists, the General Services Administration may demand the return of specific property or the performance of specific services. ...

  15. 10 CFR 1015.105 - Form of payment.

    Science.gov (United States)

    2010-01-01

    ... DEPARTMENT OF ENERGY (GENERAL PROVISIONS) COLLECTION OF CLAIMS OWED THE UNITED STATES General § 1015.105 Form of payment. Claims may be paid in the form of money or, when a contractual basis exists, the Government may demand the return of specific property or the performance of specific services. ...

  16. 75 FR 32989 - Proposed Collection; Comment Request for Form 706

    Science.gov (United States)

    2010-06-10

    ... 706, United States Estate (and Generation-Skipping Transfer) Tax Return. DATES: Written comments should be received on or before August 9, 2010 to be assured of consideration. ADDRESSES: Direct all... Transfer) Tax Return. OMB Number: 1545-0015. Form Number: 706. Abstract: Form 706 is used by executors to...

  17. 27 CFR 26.67 - Bond, Form 2897-Wine.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bond, Form 2897-Wine. 26... Liquors and Articles in Puerto Rico Bonds § 26.67 Bond, Form 2897—Wine. Where a proprietor intends to withdraw, for purpose of shipment to the United States, wine of Puerto Rican manufacture from bonded...

  18. Full-scale leaching study of commercial reactor waste forms

    International Nuclear Information System (INIS)

    Kalb, P.D.; Colombo, P.

    1984-01-01

    This paper describes a full-scale leaching experiment which has been conducted at Brookhaven National Laboratory (BNL) to study the release of radionuclides from actual commercial reactor waste forms. While many studies characterizing the leaching behavior of simulated laboratory-scale waste forms have been performed, this program represents one of the first attempts in the United States to quantify activity releases for real, full-scale waste forms. 5 references, 5 figures, 1 table

  19. Decommissioning Unit Cost Data

    International Nuclear Information System (INIS)

    Sanford, P. C.; Stevens, J. L.; Brandt, R.

    2002-01-01

    The Rocky Flats Closure Site (Site) is in the process of stabilizing residual nuclear materials, decommissioning nuclear facilities, and remediating environmental media. A number of contaminated facilities have been decommissioned, including one building, Building 779, that contained gloveboxes used for plutonium process development but did little actual plutonium processing. The actual costs incurred to decommission this facility formed much of the basis or standards used to estimate the decommissioning of the remaining plutonium-processing buildings. Recent decommissioning activities in the first actual production facility, Building 771, implemented a number of process and procedural improvements. These include methods for handling plutonium contaminated equipment, including size reduction, decontamination, and waste packaging, as well as management improvements to streamline planning and work control. These improvements resulted in a safer working environment and reduced project cost, as demonstrated in the overall project efficiency. The topic of this paper is the analysis of how this improved efficiency is reflected in recent unit costs for activities specific to the decommissioning of plutonium facilities. This analysis will allow the Site to quantify the impacts on future Rocky Flats decommissioning activities, and to develop data for planning and cost estimating the decommissioning of future facilities. The paper discusses the methods used to collect and arrange the project data from the individual work areas within Building 771. Regression and data correlation techniques were used to quantify values for different types of decommissioning activities. The discussion includes the approach to identify and allocate overall project support, waste management, and Site support costs based on the overall Site and project costs to provide a ''burdened'' unit cost. The paper ultimately provides a unit cost basis that can be used to support cost estimates for

  20. Public Expectations in Local Governance: Unit Committees under ...

    African Journals Online (AJOL)

    2017-05-01

    May 1, 2017 ... Keywords: Governance, Decentralisation, Public Services Delivery, Unit ..... company after 24 hours, as indicated on the electricity company's forms. ...... Decentralisation and Poverty: Conceptual Framework and Application.

  1. N′-[(1E-1-(4-Chlorophenylethylidene]formohydrazide

    Directory of Open Access Journals (Sweden)

    Zahid Shafiq

    2009-10-01

    Full Text Available The structure of the title compound, C9H9ClN2O, consists of centrosymmetric dimers due to intermolecular N—H...O hydrogen bonding, forming R22(8 ring motifs. The dihedral angle between the p-chlorophenyl unit and the remaining heavy-atom group is 6.77 (17°.

  2. Advances in metal forming expert system for metal forming

    CERN Document Server

    Hingole, Rahulkumar Shivajirao

    2015-01-01

    This comprehensive book offers a clear account of the theory and applications of advanced metal forming. It provides a detailed discussion of specific forming processes, such as deep drawing, rolling, bending extrusion and stamping. The author highlights recent developments of metal forming technologies and explains sound, new and powerful expert system techniques for solving advanced engineering problems in metal forming. In addition, the basics of expert systems, their importance and applications to metal forming processes, computer-aided analysis of metalworking processes, formability analysis, mathematical modeling and case studies of individual processes are presented.

  3. Electromagnetic Hadronic Form-Factors

    International Nuclear Information System (INIS)

    Edwards, Robert G.

    2005-01-01

    We present a calculation of the nucleon electromagnetic form-factors as well as the pion and rho to pion transition form-factors in a hybrid calculation with domain wall valence quarks and improved staggered (Asqtad) sea quarks

  4. A compiler for variational forms

    OpenAIRE

    Kirby, Robert C.; Logg, Anders

    2011-01-01

    As a key step towards a complete automation of the finite element method, we present a new algorithm for automatic and efficient evaluation of multilinear variational forms. The algorithm has been implemented in the form of a compiler, the FEniCS Form Compiler FFC. We present benchmark results for a series of standard variational forms, including the incompressible Navier-Stokes equations and linear elasticity. The speedup compared to the standard quadrature-based approach is impressive; in s...

  5. Impact test for solid waste forms

    International Nuclear Information System (INIS)

    Wallace, R.M.; Kelley, J.A.

    1976-03-01

    Samples of concretes and glasses being considered for incorporation of radioactive waste sludge were subjected to impact tests to determine the relationship between the energy of the impact and the resulting increase in surface area of the damaged sample. Test results indicate that the increased surface area per unit of energy input for glass waste forms is less by a factor of about three than that for concretes containing 40 wt percent simulated sludge (average values of 9.6 cm 2 /Joule and 24.7 cm 2 /Joule for glass and concrete, respectively)

  6. Adaptive Municipal e-forms

    NARCIS (Netherlands)

    Kuiper, P.M.; van Dijk, Elisabeth M.A.G.; Boerma, A.K.; Weibelzahl, S.; Cristea, A.

    2006-01-01

    Adaptation of electronic forms seems to be a step forward to reduce the burden for people who fill in forms. Municipalities more and more offer eforms online that can be used to request a municipal product or service. To create adaptive e-forms that satisfy the need of end-users, involvement of

  7. Forms of address in Isizulu

    OpenAIRE

    2014-01-01

    M.A. (African Studies) The study deals with forms of address in isiZulu. Therefore, the various aspects of speech that play roles when addressing a person, the factors affecting forms of address in isiZulu and the effect of languages such as English, Afrikaans and other African languages on the forms of address in isiZulu are of interest. Research was conducted on forms of address in isiZulu in parts of Soweto and it was discovered that form of address are determined by different factors i...

  8. SI units in radiology

    Energy Technology Data Exchange (ETDEWEB)

    Iyer, P S [Bhabha Atomic Research Centre, Bombay (India). Div. of Radiation Protection

    1978-11-01

    The proposal of the International Commission on Radiation Units and Measurements that the special units of radiation and radioactivity-roentgen, rad, rem and curie-be replaced by the International System (SI) of Units has been accepted by international bodies. This paper reviews the resons for introducing the new units and their features. The relation between the special units and the corresponding SI units is discussed with examples. In spite of anticipated difficulties, the commission recommends a smooth and efficient changeover to the SI units in ten years.

  9. Undercuts by Laser Shock Forming

    International Nuclear Information System (INIS)

    Wielage, Hanna; Vollertsen, Frank

    2011-01-01

    In laser shock forming TEA-CO 2 -laser induced shock waves are used to form metal foils, such as aluminum or copper. The process utilizes an initiated plasma shock wave on the target surface, which leads to a forming of the foil. A challenge in forming technologies is the manufacturing of undercuts. By conventional forming methods these special forms are not feasible. In this article, it is presented that undercuts in the micro range can be produced by laser shock deep drawing. Different drawing die diameters, drawing die depths and the material aluminum in the thicknesses 20 and 50 μm were investigated. It will be presented that smaller die diameters facilitate undercuts compared to bigger die diameters. The phenomena can be explained by Barlow's formula. Furthermore, it is shown which maximum undercut depth at different die diameters can be reached. To this end, cross-sections of the different parameter combinations are displayed.

  10. Forming processes and mechanics of sheet metal forming

    NARCIS (Netherlands)

    Burchitz, I.A.

    2004-01-01

    The report is dealing with the numerical analysis of forming processes. Forming processes is the large group of manufacturing processes used to obtain various product shapes by means of plastic deformations. The report is organized as follows. An overview of the deformation processes and the

  11. 7 CFR 1755.510 - Construction and assembly unit drawings.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Construction and assembly unit drawings. 1755.510..., AND STANDARD CONTRACT FORMS § 1755.510 Construction and assembly unit drawings. (a) The construction and assembly unit drawings in this section shall be used by borrowers to assist the installer in...

  12. 22 CFR 22.3 - Remittances in the United States.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Remittances in the United States. 22.3 Section...-DEPARTMENT OF STATE AND FOREIGN SERVICE § 22.3 Remittances in the United States. (a) Type of remittance. Remittances shall be in the form of: (1) Check or bank draft drawn on a bank in the United States; (2) money...

  13. Confectionery-based dose forms.

    Science.gov (United States)

    Tangso, Kristian J; Ho, Quy Phuong; Boyd, Ben J

    2015-01-01

    Conventional dosage forms such as tablets, capsules and syrups are prescribed in the normal course of practice. However, concerns about patient preferences and market demands have given rise to the exploration of novel unconventional dosage forms. Among these, confectionery-based dose forms have strong potential to overcome compliance problems. This report will review the availability of these unconventional dose forms used in treating the oral cavity and for systemic drug delivery, with a focus on medicated chewing gums, medicated lollipops, and oral bioadhesive devices. The aim is to stimulate increased interest in the opportunities for innovative new products that are available to formulators in this field, particularly for atypical patient populations.

  14. Tectonics: The meaning of form

    DEFF Research Database (Denmark)

    Christiansen, Karl; Brandt, Per Aage

    Tectonics – The meaning of form deals with one of the core topics of architecture: the relationship between form and content. In the world of architecture, form is not only made from brick, glass and wood. Form means something. When a material is processed with sufficient technical skill and insi...... perspectives. You can read the chapters in any order you like – from the beginning, end or the middle. There is no correct order. The project is methodologically inductive: the more essays you read, the broader your knowledge of tectonics get....

  15. Amorphous drugs and dosage forms

    DEFF Research Database (Denmark)

    Grohganz, Holger; Löbmann, K.; Priemel, P.

    2013-01-01

    The transformation to an amorphous form is one of the most promising approaches to address the low solubility of drug compounds, the latter being an increasing challenge in the development of new drug candidates. However, amorphous forms are high energy solids and tend to recry stallize. New...... formulation principles are needed to ensure the stability of amorphous drug forms. The formation of solid dispersions is still the most investigated approach, but additional approaches are desirable to overcome the shortcomings of solid dispersions. Spatial separation by either coating or the use of micro-containers...... before single molecules are available for the formation of crystal nuclei, thus stabilizing the amorphous form....

  16. INFORMATIONAL EFFECT OF A FORM

    Directory of Open Access Journals (Sweden)

    Kovalenko V.F.

    2016-02-01

    Full Text Available The study was conducted by method of light scattering of laser emission. The influence of the form field, mutual influence of mental informational and form torsional fields as well as the following exposure of water samples in the form field after the cease of informational influence on water structure were examined. Paper forms of a pyramid, a cylinder, and a prism were used. The experimental findings show that mechanism of mutual influence on water structure of the form and informational torsional fields depended on the initial conditions of spin restructuring process – the configuration of a form, the type of the form field (internal and external ones, and the initial water structure. The influence of the form field on informational aftereffect was determined, the character of which was defined by ratio of intensities of torsional form field and an informational soliton. The phenomenon of the abnormally large amplification of the informational aftereffect in the internal field of a pyramid demonstrating the attributes of positive reverse connection between the informational soliton and torsional field of water structure and selection of generated cluster sizes were discovered.

  17. Improving the forming capability of laser dynamic forming by using rubber as a forming medium

    Science.gov (United States)

    Shen, Zongbao; Liu, Huixia; Wang, Xiao; Wang, Cuntang

    2016-04-01

    Laser dynamic forming (LDF) is a novel high velocity forming technique, which employs laser-generated shock wave to load the sample. The forming velocity induced by the high energy laser pulse may exceed the critical forming velocity, resulting in the occurrence of premature fracture. To avoid the above premature fracture, rubber is introduced in LDF as a forming medium to prolong the loading duration in this paper. Laser induced shock wave energy is transferred to the sample in different forming stages, so the forming velocity can be kept below the critical forming velocity when the initial laser energy is high for fracture. Bulge forming experiments with and without rubber were performed to study the effect of rubber on loading duration. The experimental results show that, the shock wave energy attenuates during the propagation through the rubber layer, the rubber can avoid the premature fracture. So the plastic deformation can continue, the forming capability of LDF is improved. Due to the severe plastic deformation under rubber compression, adiabatic shear bands (ASB) occur in LDF with rubber. The material softening in ASB leads to the irregular fracture, which is different from the premature fracture pattern (regular fracture) in LDF without rubber. To better understand this deformation behavior, Johnson-Cook model is used to simulate the dynamic response and the evolution of ASB of copper sample. The simulation results also indicate the rubber can prolong the loading duration.

  18. The Classic Series: Television Institutions and Narrative Forms

    Directory of Open Access Journals (Sweden)

    Gianluigi Rossini

    2014-11-01

    Full Text Available In the late 40s and early 50s television was finally coming out of its experimental stage and becoming a national medium all around the world. During this period, in the United States, the tv series was only one of the emerging narrative forms, in competition especially with the live anthology drama, which at the time seemed to be the most interesting and televisual one. While in Europe the anthology form will continue to thrive until the late 70s, in the United States it will virtually disappear in less than a decade, superseded by the filmed episodic series. Aim of this essay is to describe how the episodic series became the most important narrative form in the US, and how the gradual definition of television’s governance and financing system during the 50s had a great influence on the development of its narrative forms.

  19. Biobank Report: United Kingdom.

    Science.gov (United States)

    Kaye, Jane; Bell, Jessica; Briceno, Linda; Mitchell, Colin

    2016-03-01

    The United Kingdom is a leader in genomics research, and the presence of numerous types of biobanks and the linking of health data and research within the UK evidences the importance of biobank-based research in the UK. There is no biobank-specific law in the UK and research on biobank materials is governed by a confusing set of statutory law, common law, regulations, and guidance documents. Several layers of applicable law, from European to local, further complicate an understanding of privacy protections. Finally, biobanks frequently contain data in addition to the samples; the legal framework in the UK generally differentiates between data and samples and the form of the data affects the applicability of legal provisions. Biobanks must be licensed by the Human Tissue Authority; certain projects must be reviewed by Research Ethics Committees, and all projects are encouraged to be reviewed by them. Data Access Committees in biobanks are also common in the UK. While this confusing array of legal provisions leaves privacy protections in biobanking somewhat unclear, changes at the EU level may contribute to harmonization of approaches to privacy. © 2016 American Society of Law, Medicine & Ethics.

  20. Units of rotational information

    Science.gov (United States)

    Yang, Yuxiang; Chiribella, Giulio; Hu, Qinheping

    2017-12-01

    Entanglement in angular momentum degrees of freedom is a precious resource for quantum metrology and control. Here we study the conversions of this resource, focusing on Bell pairs of spin-J particles, where one particle is used to probe unknown rotations and the other particle is used as reference. When a large number of pairs are given, we show that every rotated spin-J Bell state can be reversibly converted into an equivalent number of rotated spin one-half Bell states, at a rate determined by the quantum Fisher information. This result provides the foundation for the definition of an elementary unit of information about rotations in space, which we call the Cartesian refbit. In the finite copy scenario, we design machines that approximately break down Bell states of higher spins into Cartesian refbits, as well as machines that approximately implement the inverse process. In addition, we establish a quantitative link between the conversion of Bell states and the simulation of unitary gates, showing that the fidelity of probabilistic state conversion provides upper and lower bounds on the fidelity of deterministic gate simulation. The result holds not only for rotation gates, but also to all sets of gates that form finite-dimensional representations of compact groups. For rotation gates, we show how rotations on a system of given spin can simulate rotations on a system of different spin.

  1. NETWORK CODING BY BEAM FORMING

    DEFF Research Database (Denmark)

    2013-01-01

    Network coding by beam forming in networks, for example, in single frequency networks, can provide aid in increasing spectral efficiency. When network coding by beam forming and user cooperation are combined, spectral efficiency gains may be achieved. According to certain embodiments, a method...... cooperating with the plurality of user equipment to decode the received data....

  2. Automated Test-Form Generation

    Science.gov (United States)

    van der Linden, Wim J.; Diao, Qi

    2011-01-01

    In automated test assembly (ATA), the methodology of mixed-integer programming is used to select test items from an item bank to meet the specifications for a desired test form and optimize its measurement accuracy. The same methodology can be used to automate the formatting of the set of selected items into the actual test form. Three different…

  3. Electromagnetic form factors of hadrons

    International Nuclear Information System (INIS)

    Zidell, V.S.

    1976-01-01

    A vector meson dominance model of the electromagnetic form factors of hadrons is developed which is based on the use of unstable particle propagators. Least-square fits are made to the proton, neutron, pion and kaon form factor data in both the space and time-like regions. A good fit to the low-energy nucleon form factor data is obtained using only rho, ω, and phi dominance, and leads to a determination of the vector meson resonance parameters in good agreement with experiment. The nucleon-vector meson coupling constants obey simple sum rules indicating that there exists no hard core contribution to the form factors within theoretical uncertainties. The prediction for the electromagnetic radii of the proton is in reasonable agreement with recent experiments. The pion and kaon charge form factors as deduced from the nucleon form factors assuming vector meson universality are compared to the data. The pion form factor agrees with the data in both the space and time-like regions. The pion charge radius is in agreement with the recent Dubna result, but the isovector P-wave pion-pion phase shift calculated from the theory disagrees with experiment. A possible contribution to the form factors from a heavy rho meson is also evaluated

  4. [Galenic forms for oral medication].

    Science.gov (United States)

    El Semman, Ousseid; Certain, Agnès; Bouziane, Faouzia; Arnaud, Philippe

    2012-10-01

    Galenic science is interested in the art and the way of formulating an active principle with an excipient in order for it to be administered to the patient. The pharmaceutical forms envisage different administration routes, including by mouth. Nurses need to handle and sometimes modify the pharmaceutical form of a drug to make it easier for the patient to take. This requires vigilance.

  5. Unit Cost Compendium Calculations

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Unit Cost Compendium (UCC) Calculations raw data set was designed to provide for greater accuracy and consistency in the use of unit costs across the USEPA...

  6. United States housing, 2012

    Science.gov (United States)

    Delton Alderman

    2013-01-01

    Provides current and historical information on housing market in the United States. Information includes trends for housing permits and starts, housing completions for single and multifamily units, and sales and construction. This report will be updated annually.

  7. United Cerebral Palsy

    Science.gov (United States)

    ... your local affiliate Find your local affiliate United Cerebral Palsy United Cerebral Palsy (UCP) is a trusted resource for individuals with Cerebral Palsy and other disabilities and their networks. Individuals with ...

  8. Malaria Treatment (United States)

    Science.gov (United States)

    ... Providers, Emergency Consultations, and General Public. Contact Us Malaria Treatment (United States) Recommend on Facebook Tweet Share Compartir Treatment of Malaria: Guidelines For Clinicians (United States) Download PDF version ...

  9. International Recognition of FormAkademisk

    Directory of Open Access Journals (Sweden)

    Janne Beate Reitan

    2017-12-01

    Full Text Available FormAkademisk was invited to the Design Journal Editors' Meeting at the College of Design, Architecture, Art, and Planning (DAAP, University of Cincinnati in late October, as the only design research journal from the Nordic region. The meeting was organized in advance of the International Association of Societies of Design Research (IASDR 2017 conference.Liv Merete Nielsen, who initiated the creation of  FormAkademisk and has been a Section Editor since the start-up and I, who have been the Editor-in-Chief for the entire period, travelled to the meeting.FormAkademisk   was in good company - among the others invited, we can mention the American Design Issues and the British Design Studies, both of which are at Level 2 of the Norwegian Science Index - NVI. Other reputable journals invited were the International Journal of Design from Taiwan, She Ji - The Journal of Design, Economics, and Innovation from Tongji University in Shanghai, China, Design and Culture from the United States, Co-Design from the United Kingdom, Information Design Journal published in the Netherlands with an international editorial board, Journal of Design, Business & Society with an international editorial board, the French Sciences du Design and Visible Language published at the University of Cincinnati, USA who hosted the meeting.First, we warmed up by describing each journal's editorial profile. For FormAkademisk we emphasized that we have two equal focuses – research in design, but also research in design education for the general public. This combination seems to be unique internationally.Common issues we discussed further were challenges with the quality of submitted articles and obtaining qualified peer reviewers. We also discussed whether we would agree on a common understanding of what it means to be included as an author of an article. Based on the discussions, FormAkademisk comes well prepared compared to the other internationally leading design research

  10. Indoor unit for electric heat pump

    Science.gov (United States)

    Draper, R.; Lackey, R.S.; Fagan, T.J. Jr.; Veyo, S.E.; Humphrey, J.R.

    1984-05-22

    An indoor unit for an electric heat pump is provided in modular form including a refrigeration module, an air mover module, and a resistance heat package module, the refrigeration module including all of the indoor refrigerant circuit components including the compressor in a space adjacent the heat exchanger, the modules being adapted to be connected to air flow communication in several different ways as shown to accommodate placement of the unit in various orientations. 9 figs.

  11. Cold-formed steel design

    CERN Document Server

    Yu, Wei-Wen

    2010-01-01

    The definitive text in the field, thoroughly updated and expanded Hailed by professionals around the world as the definitive text on the subject, Cold-Formed Steel Design is an indispensable resource for all who design for and work with cold-formed steel. No other book provides such exhaustive coverage of both the theory and practice of cold-formed steel construction. Updated and expanded to reflect all the important developments that have occurred in the field over the past decade, this Fourth Edition of the classic text provides you with more of the detailed, up-to-the-minute techni

  12. Differential forms theory and practice

    CERN Document Server

    Weintraub, Steven H

    2014-01-01

    Differential forms are utilized as a mathematical technique to help students, researchers, and engineers analyze and interpret problems where abstract spaces and structures are concerned, and when questions of shape, size, and relative positions are involved. Differential Forms has gained high recognition in the mathematical and scientific community as a powerful computational tool in solving research problems and simplifying very abstract problems through mathematical analysis on a computer. Differential Forms, 2nd Edition, is a solid resource for students and professionals needing a solid g

  13. Waste forms for plutonium disposition

    International Nuclear Information System (INIS)

    Johnson, S.G.; O'Holleran, T.P.; Frank, S.M.; Meyer, M.K.; Hanson, M.; Staples, B.A.; Knecht, D.A.; Kong, P.C.

    1997-01-01

    The field of plutonium disposition is varied and of much importance, since the Department of Energy has decided on the hybrid option for disposing of the weapons materials. This consists of either placing the Pu into mixed oxide fuel for reactors or placing the material into a stable waste form such as glass. The waste form used for Pu disposition should exhibit certain qualities: (1) provide for a suitable deterrent to guard against proliferation; (2) be of minimal volume, i.e., maximize the loading; and (3) be reasonably durable under repository-like conditions. This paper will discuss several Pu waste forms that display promising characteristics

  14. Reform of the United Kingdom judicial system

    Directory of Open Access Journals (Sweden)

    Ovidiu-Horia MAICAN

    2013-12-01

    Full Text Available The separation of powers in a state is an essential characteristic of every democratic country, a principle present in many constitutions, most notably that of the United States. The concept is imperfectly fulfilled in the United Kingdom, given that the executive (Ministers form part of the legislature and that part of the judiciary (Law Lords sit in the legislature. As a result, it was necessary to remove the constitutional anomaly that the highest court of appeal in the United Kingdom was situated within one of the chambers of Parliament.

  15. Myositis ossificans localisata pseudomalignant Form

    International Nuclear Information System (INIS)

    Grunt, J.; Jankovich, E.; Vasovicova, M.

    1994-01-01

    Authors presents computer tomography and angiographic findings of rare pseudomalignant form of myositis ossificans. Correct diagnosis achieved by complex evaluation of ascertain findings, including biopsy, enables proper treatment with excluding too radical therapy. 3 figs., 4 refs

  16. Forming lead-based anodes

    Energy Technology Data Exchange (ETDEWEB)

    Ogorodnichuk, V I; Voitsekhovich, R I

    1972-01-01

    Lead-based anodes can be produced by forming a layer of lead dioxide by chemical treatment in a solution of sulfuric acid in potassium permanganate at 80 to 100/sup 0/. The solution is mixed by compressed air. (RWR)

  17. Calculation of pion form factor

    International Nuclear Information System (INIS)

    Vahedi, N.; Amirarjomand, S.

    1975-09-01

    The pion form factor is calculated using the structure function Wsub(2), which incorporates kinematical constraints, threshold behaviour and scaling. The Bloom-Gilman sum rule is used and only the two leading Regge trajectories are taken into account

  18. Microdomain forming proteins in oncogenesis

    Directory of Open Access Journals (Sweden)

    I. B. Zborovskaya

    2016-01-01

    Full Text Available Lipid rafts are lateral assembles of cholesterol, sphingomyelin, glicosphingolipids and specific proteins within cell plasma membrane. These microdomains are involved into a number of important cellular processes including membrane rearrangement, protein internalization, signal transduction, entry of viruses into the cell. Some of lipid rafts are stabilized by special microdomain-forming proteins such as caveolins, SPFH domain containing superfamily, tetraspanins, galectins, which maintain integrity of rafts and regulate signal transduction via forming of “signalosomes”. Involvement of the different lipid rafts is necessary in many situations such as binding of growth factors with their receptors, integrin regulation, cytoskeleton and extracellular matrix rearrangements, vesicular transport, etc. However, such classes of microdomain-forming proteins are still considered separately from each other. In this review we tried to perform complex analysis of microdomain-forming proteins in regulation of cancer assotiated processes.

  19. Forms of Approximate Radiation Transport

    CERN Document Server

    Brunner, G

    2002-01-01

    Photon radiation transport is described by the Boltzmann equation. Because this equation is difficult to solve, many different approximate forms have been implemented in computer codes. Several of the most common approximations are reviewed, and test problems illustrate the characteristics of each of the approximations. This document is designed as a tutorial so that code users can make an educated choice about which form of approximate radiation transport to use for their particular simulation.

  20. Flexible forms of working hours

    OpenAIRE

    Knapp, Viktor

    2017-01-01

    66 Abstract - Flexible forms of working hours This diploma thesis deals with the flexible forms of working hours and its goal is to describe this issue in intelligible and comprehensive way. It is being very interesting and current theme which is to a great extent not subject to direct legal regulations and provides its contracting parties with a big amount of freedom of contract. This fact assists in bigger flexibilization of labour market and represents a significant instrument in the fight...

  1. 77 FR 58142 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2012-09-19

    ...). Background and Brief Description Violence is an important public health problem. In the United States... two years ago may well miss the mark. Local and Federal criminal justice agencies such as the Federal.... Ultimately, this information will guide states in designing programs that reduce multiple forms of violence...

  2. LEVELS AND TYPES OF AEROBIC SPORE FORMING BACTERIA ...

    African Journals Online (AJOL)

    The four companies whose packaged product were studied had an average plate total spore counts as follows: Company A=6.2x 103; Company B= 3.1x 104; Company C= 6.0x 104 and Company D= 3.1x102 colony forming units per gram, respectively. Identification tests showed that among the aerobic spore formers were ...

  3. 78 FR 6327 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2013-01-30

    ... of illness and disability of the population of the United States. This three-year clearance request... submitting inpatient level data in the form of electronic Uniform Bill (UB-04) administrative claims data as... include universities, research organizations, many in the private sector, foundations, and a variety of...

  4. 77 FR 18705 - Discontinuance of Form CO in Registration Practices

    Science.gov (United States)

    2012-03-28

    ... issue, the author is a citizen or domiciliary of the United States, the work is a work for hire, the... LIBRARY OF CONGRESS Copyright Office 37 CFR Parts 201 and 202 [Docket No. 2011-8] Discontinuance of Form CO in Registration Practices AGENCY: Copyright Office, Library of Congress. ACTION: Final...

  5. Using Nonprinciple Rays to Form Images in Geometrical Optics

    Science.gov (United States)

    Marx, Jeff; Mian, Shabbir

    2015-01-01

    Constructing ray diagrams to locate the image of an object formed by thin lenses and mirrors is a staple of many introductory physics courses at the high school and college levels, and has been the subject of some pedagogy-related articles. Our review of textbooks distributed in the United States suggests that the singular approach involves…

  6. 78 FR 52533 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2013-08-23

    ... susceptibility data required on all of the healthcare-associated infection (HAI) report forms (i.e., BSI, UTI... Infection (UTI). Staff RN 57.116: Denominators for 6,000 9 3 Neonatal Intensive Care Unit (NICU). Staff RN.... Registered Nurse (Infection 57.140: Urinary Tract 250 9 27/60 Preventionist). Infection (UTI) for LTCF...

  7. Star-forming Filament Models

    International Nuclear Information System (INIS)

    Myers, Philip C.

    2017-01-01

    New models of star-forming filamentary clouds are presented in order to quantify their properties and to predict their evolution. These 2D axisymmetric models describe filaments that have no core, one low-mass core, and one cluster-forming core. They are based on Plummer-like cylinders and spheroids that are bounded by a constant-density surface of finite extent. In contrast to 1D Plummer-like models, they have specific values of length and mass, they approximate observed column density maps, and their distributions of column density ( N -pdfs) are pole-free. Each model can estimate the star-forming potential of a core-filament system by identifying the zone of gas dense enough to form low-mass stars and by counting the number of enclosed thermal Jeans masses. This analysis suggests that the Musca central filament may be near the start of its star-forming life, with enough dense gas to make its first ∼3 protostars, while the Coronet filament is near the midpoint of its star formation, with enough dense gas to add ∼8 protostars to its ∼20 known stars. In contrast, L43 appears to be near the end of its star-forming life, since it lacks enough dense gas to add any new protostars to the two young stellar objectsalready known.

  8. Standardized waste form test methods

    International Nuclear Information System (INIS)

    Slate, S.C.

    1984-11-01

    The Materials Characterization Center (MCC) is developing standard tests to characterize nuclear waste forms. Development of the first thirteen tests was originally initiated to provide data to compare different high-level waste (HLW) forms and to characterize their basic performance. The current status of the first thirteen MCC tests and some sample test results is presented: The radiation stability tests (MCC-6 and 12) and the tensile-strength test (MCC-11) are approved; the static leach tests (MCC-1, 2, and 3) are being reviewed for full approval; the thermal stability (MCC-7) and microstructure evaluation (MCC-13) methods are being considered for the first time; and the flowing leach tests methods (MCC-4 and 5), the gas generation methods (MCC-8 and 9), and the brittle fracture method (MCC-10) are indefinitely delayed. Sample static leach test data on the ARM-1 approved reference material are presented. Established tests and proposed new tests will be used to meet new testing needs. For waste form production, tests on stability and composition measurement are needed to provide data to ensure waste form quality. In transportation, data are needed to evaluate the effects of accidents on canisterized waste forms. The new MCC-15 accident test method and some data are presented. Compliance testing needs required by the recent draft repository waste acceptance specifications are described. These specifications will control waste form contents, processing, and performance. 2 references, 2 figures

  9. Standardized waste form test methods

    International Nuclear Information System (INIS)

    Slate, S.C.

    1984-01-01

    The Materials Characterization Center (MCC) is developing standard tests to characterize nuclear waste forms. Development of the first thirteen tests was originally initiated to provide data to compare different high-level waste (HLW) forms and to characterize their basic performance. The current status of the first thirteen MCC tests and some sample test results are presented: the radiation stability tests (MCC-6 and 12) and the tensile-strength test (MCC-11) are approved; the static leach tests (MCC-1, 2, and 3) are being reviewed for full approval; the thermal stability (MCC-7) and microstructure evaluation (MCC-13) methods are being considered for the first time; and the flowing leach test methods (MCC-4 and 5), the gas generation methods (MCC-8 and 9), and the brittle fracture method (MCC-10) are indefinitely delayed. Sample static leach test data on the ARM-1 approved reference material are presented. Established tests and proposed new tests will be used to meet new testing needs. For waste form production, tests on stability and composition measurement are needed to provide data to ensure waste form quality. In transporation, data are needed to evaluate the effects of accidents on canisterized waste forms. The new MCC-15 accident test method and some data are presented. Compliance testing needs required by the recent draft repository waste acceptance specifications are described. These specifications will control waste form contents, processing, and performance

  10. Form 6 - gas balancing agreement

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    In 1988, a special Committee of the Rocky Mountain Mineral Law Foundation undertook a project to draft a model from gas balancing agreement. This project was initiated at the request of a number of Foundation members who felt that a model form gas balancing agreement would facilitate the negotiation of operating agreement, since gas balancing issues had become sticking points in the process. The Committee was composed of attorneys representing a wide cross-section of the oil and gas industry including both major and independent oil companies, production companies with interstate pipeline affiliates, and private practitioners. The Committee attempted to address the more controversial issues in gas balancing with optional provisions in the Form. To facilitate the negotiation process, the number of optional provisions was minimized. This form may be used as an Appendix to the new A.A.P.L. Form 610-1989 Model Form Operating Agreement. This book includes provision of this Form which are: Ownership of gas production; Balancing of production accounts; Cash balancing upon depletion; Deliverability tests; Nominations; Statements; Payment of taxes; Operating expenses; Overproducing allowable; Payment of leasehold burdens; Operator's liability; Successors and assigns; Audits; Arbitration; and Operator's fees

  11. Star-forming Filament Models

    Energy Technology Data Exchange (ETDEWEB)

    Myers, Philip C., E-mail: pmyers@cfa.harvard.edu [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States)

    2017-03-20

    New models of star-forming filamentary clouds are presented in order to quantify their properties and to predict their evolution. These 2D axisymmetric models describe filaments that have no core, one low-mass core, and one cluster-forming core. They are based on Plummer-like cylinders and spheroids that are bounded by a constant-density surface of finite extent. In contrast to 1D Plummer-like models, they have specific values of length and mass, they approximate observed column density maps, and their distributions of column density ( N -pdfs) are pole-free. Each model can estimate the star-forming potential of a core-filament system by identifying the zone of gas dense enough to form low-mass stars and by counting the number of enclosed thermal Jeans masses. This analysis suggests that the Musca central filament may be near the start of its star-forming life, with enough dense gas to make its first ∼3 protostars, while the Coronet filament is near the midpoint of its star formation, with enough dense gas to add ∼8 protostars to its ∼20 known stars. In contrast, L43 appears to be near the end of its star-forming life, since it lacks enough dense gas to add any new protostars to the two young stellar objectsalready known.

  12. Conjoint Forming - Technologies for Simultaneous Forming and Joining

    International Nuclear Information System (INIS)

    Groche, P; Wohletz, S; Mann, A; Krech, M; Monnerjahn, V

    2016-01-01

    The market demand for new products optimized for e. g. lightweight applications or smart components leads to new challenges in production engineering. Hybrid structures represent one promising approach. They aim at higher product performance by using a suitable combination of different materials. The developments of hybrid structures stimulate the research on joining of dissimilar materials. Since they allow for joining dissimilar materials without external heating technologies based on joining by plastic deformation seem to be of special attractiveness. The paper at hand discusses the conjoint forming approach. This approach combines forming and joining in one process. Two or more workpieces are joined while at least one workpiece is plastically deformed. After presenting the fundamental joining mechanisms, the conjoint forming approach is discussed comprehensively. Examples of conjoint processes demonstrate the effectiveness and reveal the underlying phenomena. (paper)

  13. Voice as Form of Life and Life Form

    Directory of Open Access Journals (Sweden)

    Sandra Laugier

    2015-10-01

    Full Text Available This paper studies the concept of form of life as central to ordinary language philosophy (as understood in Wittgenstein’s, Austin’s and Stanley Cavell’s work: philosophy of our language as spoken; pronounced by a human voice within a form of life. Such an approach to Wittgenstein’s later philosophy shifts the question of the common use of language – central to Wittgenstein’s Investigations – to the definition of the subject as voice, and to the reinvention of subjectivity in language. The voice is both a subjective and common expression: it is what makes it possible for my individual voice, or claim, to become shared and for our forms of life to be intertwined with a lifeform.

  14. Comprehensive stroke units: a review of comparative evidence and experience.

    Science.gov (United States)

    Chan, Daniel K Y; Cordato, Dennis; O'Rourke, Fintan; Chan, Daniel L; Pollack, Michael; Middleton, Sandy; Levi, Chris

    2013-06-01

    Stroke unit care offers significant benefits in survival and dependency when compared to general medical ward. Most stroke units are either acute or rehabilitation, but comprehensive (combined acute and rehabilitation) model (comprehensive stroke unit) is less common. To examine different levels of evidence of comprehensive stroke unit compared to other organized inpatient stroke care and share local experience of comprehensive stroke units. Cochrane Library and Medline (1980 to December 2010) review of English language articles comparing stroke units to alternative forms of stroke care delivery, different types of stroke unit models, and differences in processes of care within different stroke unit models. Different levels of comparative evidence of comprehensive stroke units to other models of stroke units are collected. There are no randomized controlled trials directly comparing comprehensive stroke units to other stroke unit models (either acute or rehabilitation). Comprehensive stroke units are associated with reduced length of stay and greatest reduction in combined death and dependency in a meta-analysis study when compared to other stroke unit models. Comprehensive stroke units also have better length of stay and functional outcome when compared to acute or rehabilitation stroke unit models in a cross-sectional study, and better length of stay in a 'before-and-after' comparative study. Components of stroke unit care that improve outcome are multifactorial and most probably include early mobilization. A comprehensive stroke unit model has been successfully implemented in metropolitan and rural hospital settings. Comprehensive stroke units are associated with reductions in length of stay and combined death and dependency and improved functional outcomes compared to other stroke unit models. A comprehensive stroke unit model is worth considering as the preferred model of stroke unit care in the planning and delivery of metropolitan and rural stroke services

  15. Texaco, carbide form hydrogen plant venture

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that Texaco Inc. and Union Carbide Industrial Gases Inc. (UCIG) have formed a joint venture to develop and operate hydrogen plants. The venture, named HydroGEN Supply Co., is owned by Texaco Hydrogen Inc., a wholly owned subsidiary of Texaco, and UCIG Hydrogen Services Inc., a wholly owned subsidiary of UCIG. Plants built by HydroGEN will combine Texaco's HyTEX technology for hydrogen production with UCIG's position in cryogenic and advanced air separation technology. Texaco the U.S. demand for hydrogen is expected to increase sharply during the next decade, while refinery hydrogen supply is expected to drop. The Clean Air Act amendments of 1990 require U.S. refiners to lower aromatics in gasoline, resulting in less hydrogen recovered by refiners from catalytic reforming units. Meanwhile, requirements to reduce sulfur in diesel fuel will require more hydrogen capacity

  16. TRASYS form factor matrix normalization

    Science.gov (United States)

    Tsuyuki, Glenn T.

    1992-01-01

    A method has been developed for adjusting a TRASYS enclosure form factor matrix to unity. This approach is not limited to closed geometries, and in fact, it is primarily intended for use with open geometries. The purpose of this approach is to prevent optimistic form factors to space. In this method, nodal form factor sums are calculated within 0.05 of unity using TRASYS, although deviations as large as 0.10 may be acceptable, and then, a process is employed to distribute the difference amongst the nodes. A specific example has been analyzed with this method, and a comparison was performed with a standard approach for calculating radiation conductors. In this comparison, hot and cold case temperatures were determined. Exterior nodes exhibited temperature differences as large as 7 C and 3 C for the hot and cold cases, respectively when compared with the standard approach, while interior nodes demonstrated temperature differences from 0 C to 5 C. These results indicate that temperature predictions can be artificially biased if the form factor computation error is lumped into the individual form factors to space.

  17. Pre-exposure to moving form enhances static form sensitivity.

    Directory of Open Access Journals (Sweden)

    Thomas S A Wallis

    Full Text Available BACKGROUND: Motion-defined form can seem to persist briefly after motion ceases, before seeming to gradually disappear into the background. Here we investigate if this subjective persistence reflects a signal capable of improving objective measures of sensitivity to static form. METHODOLOGY/PRINCIPAL FINDINGS: We presented a sinusoidal modulation of luminance, masked by a background noise pattern. The sinusoidal luminance modulation was usually subjectively invisible when static, but visible when moving. We found that drifting then stopping the waveform resulted in a transient subjective persistence of the waveform in the static display. Observers' objective sensitivity to the position of the static waveform was also improved after viewing moving waveforms, compared to viewing static waveforms for a matched duration. This facilitation did not occur simply because movement provided more perspectives of the waveform, since performance following pre-exposure to scrambled animations did not match that following pre-exposure to smooth motion. Observers did not simply remember waveform positions at motion offset, since removing the waveform before testing reduced performance. CONCLUSIONS/SIGNIFICANCE: Motion processing therefore interacts with subsequent static visual inputs in a way that can improve performance in objective sensitivity measures. We suggest that the brief subjective persistence of motion-defined forms that can occur after motion offsets is a consequence of the decay of a static form signal that has been transiently enhanced by motion processing.

  18. Form Filling with SCC in a Vertical Form

    DEFF Research Database (Denmark)

    Thrane, Lars Nyholm

    2004-01-01

    This paper presents the results obtained from two different vertical form filling experiments with SCC that have been completed as part of the experimental work in an ongoing Ph.D project. The project is carried out at the Danish Technological Institute in collaboration with the Technical...

  19. Automorphic Forms and Mock Modular Forms in String Theory

    Science.gov (United States)

    Nazaroglu, Caner

    We study a variety of modular invariant objects in relation to string theory. First, we focus on Jacobi forms over generic rank lattices and Siegel forms that appear in N = 2, D = 4 compactifications of heterotic string with Wilson lines. Constraints from low energy spectrum and modularity are employed to deduce the relevant supersymmetric partition functions entirely. This procedure is applied on models that lead to Jacobi forms of index 3, 4, 5 as well as Jacobi forms over root lattices A2 and A3. These computations are then checked against an explicit orbifold model which can be Higgsed to the models under question. Models with a single Wilson line are then studied in detail with their relation to paramodular group Gammam as T-duality group made explicit. These results on the heterotic string side are then turned into predictions for geometric invariants using TypeII - Heterotic duality. Secondly, we study theta functions for indenite signature lattices of generic signature. Building on results in literature for signature (n-1,1) and (n-2,2) lattices, we work out the properties of generalized error functions which we call r-tuple error functions. We then use these functions to build such indenite theta functions and describe their modular completions.

  20. Induction interview form in EDH

    CERN Multimedia

    Information technology Department, AIS (Administrative Information Services) Group,

    2007-01-01

    As part of the efforts to rationalise administrative procedures, the IT and HR Departments have developed a new EDH form for induction interviews, which can be accessed using the link below. In accordance with Administrative Circular No. 2 ('Recruitment, Appointment and possible developments regarding the contractual position of Staff Members', Rev. 3), the work and training objectives to be achieved during the probation period shall be specified in writing to all new staff members during an induction interview. The interview shall take place between the new staff member and his supervisor within six weeks of him taking up his duties at the latest. https://edh.cern.ch/Document/MAPS/Induction (or from the EDH desktop, by clicking on 'Other Tasks' and going to the 'HR & Training' heading) Please note that this form is to be used exclusively for new staff members. A separate EDH form will be developed for fellows. Information technology Department, AIS (Administrative Information Services) Group Human...

  1. Induction interview form in EDH

    CERN Document Server

    Information technology Department, AIS (Administrative Information Services) Group

    2007-01-01

    As part of the efforts to rationalise administrative procedures, the IT and HR Departments have developed a new EDH form for induction interviews, which can be accessed using the link below. In accordance with Administrative Circular No. 2 ('Recruitment, Appointment and possible developments regarding the contractual position of Staff Members', Rev. 3), the work and training objectives to be achieved during the probation period shall be specified in writing to all new staff members during an induction interview. The interview shall take place between the new staff member and his supervisor within six weeks of his taking up his duties at the latest. https://edh.cern.ch/Document/MAPS/Induction1) (or from the EDH desktop, by clicking on 'Other Tasks' and going to the 'HR & Training' heading) Please note that this form is to be used exclusively for new staff members. A separate EDH form will be developed for fellows.Information technology Department, AIS (Administrative Information Services) Group Human Re...

  2. Mathematics and Forms of Life

    Directory of Open Access Journals (Sweden)

    Severin Schroeder

    2015-10-01

    Full Text Available According to Wittgenstein, mathematics is embedded in, and partly constituting, a form of life. Hence, to imagine different, alternative forms of elementary mathematics, we should have to imagine different practices, different forms of life in which they could play a role. If we tried to imagine a radically different arithmetic we should think either of a strange world (in which objects unaccountably vanish or appear or of people acting and responding in very peculiar ways. If such was their practice, a calculus expressing the norms of representation they applied could not be called false. Rather, our criticism could only be to dismiss such a practice as foolish and to dismiss their norms as too different from ours to be called ‘mathematics’.

  3. Toroidal helical quartz forming machine

    International Nuclear Information System (INIS)

    Hanks, K.W.; Cole, T.R.

    1977-01-01

    The Scyllac fusion experimental machine used 10 cm diameter smooth bore discharge tubes formed into a simple toroidal shape prior to 1974. At about that time, it was discovered that a discharge tube was required to follow the convoluted shape of the load coil. A machine was designed and built to form a fused quartz tube with a toroidal shape. The machine will accommodate quartz tubes from 5 cm to 20 cm diameter forming it into a 4 m toroidal radius with a 1 to 5 cm helical displacement. The machine will also generate a helical shape on a linear tube. Two sets of tubes with different helical radii and wavelengths have been successfully fabricated. The problems encountered with the design and fabrication of this machine are discussed

  4. Diffusion from cylindrical waste forms

    International Nuclear Information System (INIS)

    Thomas, G.F.

    1985-05-01

    The diffusion of a single component material from a finite cylindrical waste form, initially containing a uniform concentration of the material, is investigated. Under the condition that the cylinder is maintained in a well-stirred bath, expressions for the fractional inventory leached and the leach rate are derived with allowance for the possible permanent immobilization of the diffusant through its decay to a stable product and/or its irreversible reaction with the waste form matrix. The usefulness of the reported results in nuclear waste disposal applications is emphasized. The results reported herein are related to those previously derived at Oak Ridge National Laboratory by Bell and Nestor. A numerical scheme involving the partial decoupling of nested infinite summations and the use of rapidly converging rational approximants is recommended for the efficient implementation of the expressions derived to obtain reliable estimates of the bulk diffusion constant and the rate constant describing the diffusant-waste form interaction from laboratory data

  5. Substrate system for spray forming

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

    2002-01-01

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  6. Hereditary forms of breast cancer

    International Nuclear Information System (INIS)

    Bella, V.

    2009-01-01

    Breast cancer is the most common oncologic disease in the female population. Besides the sporadic occurrence it occurs in the familial and hereditary form. Persons with the occurrence of positive family anamnesis of breast cancer should be actively investigated. In the indicated cases it is necessary to send the woman to genetic examination. In case that the hereditary form of breast cancer is affirmed it is necessary to examine her family relatives. Women with the hereditary form of breast cancer occur in about 5 – 10 % portion from all women diagnosed with breast cancer. Nowadays we already know that 80 % of hereditary breast cancers are due to germ mutations in BRCA 1 and BRCA 2 gene. Persons with detected gene mutations must be dispensarized in the centres intended for it. (author)

  7. New directions in Dirichlet forms

    CERN Document Server

    Jost, Jürgen; Mosco, Umberto; Rockner, Michael; Sturm, Karl-Theodor

    1998-01-01

    The theory of Dirichlet forms brings together methods and insights from the calculus of variations, stochastic analysis, partial differential and difference equations, potential theory, Riemannian geometry and more. This book features contributions by leading experts and provides up-to-date, authoritative accounts on exciting developments in the field and on new research perspectives. Topics covered include the following: stochastic analysis on configuration spaces, specifically a mathematically rigorous approach to the stochastic dynamics of Gibbs measures and infinite interacting particle systems; subelliptic PDE, homogenization, and fractals; geometric aspects of Dirichlet forms on metric spaces and function theory on such spaces; generalized harmonic maps as nonlinear analogues of Dirichlet forms, with an emphasis on non-locally compact situations; and a stochastic approach based on Brownian motion to harmonic maps and their regularity. Various new connections between the topics are featured, and it is de...

  8. FORM version 4.0

    Science.gov (United States)

    Kuipers, J.; Ueda, T.; Vermaseren, J. A. M.; Vollinga, J.

    2013-05-01

    We present version 4.0 of the symbolic manipulation system FORM. The most important new features are manipulation of rational polynomials and the factorization of expressions. Many other new functions and commands are also added; some of them are very general, while others are designed for building specific high level packages, such as one for Gröbner bases. New is also the checkpoint facility, that allows for periodic backups during long calculations. Finally, FORM 4.0 has become available as open source under the GNU General Public License version 3. Program summaryProgram title: FORM. Catalogue identifier: AEOT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 151599 No. of bytes in distributed program, including test data, etc.: 1 078 748 Distribution format: tar.gz Programming language: The FORM language. FORM itself is programmed in a mixture of C and C++. Computer: All. Operating system: UNIX, LINUX, Mac OS, Windows. Classification: 5. Nature of problem: FORM defines a symbolic manipulation language in which the emphasis lies on fast processing of very large formulas. It has been used successfully for many calculations in Quantum Field Theory and mathematics. In speed and size of formulas that can be handled it outperforms other systems typically by an order of magnitude. Special in this version: The version 4.0 contains many new features. Most important are factorization and rational arithmetic. The program has also become open source under the GPL. The code in CPC is for reference. You are encouraged to upload the most recent sources from www.nikhef.nl/form/formcvs.php because of frequent bug fixes. Solution method: See "Nature of Problem", above. Additional comments: NOTE: The code in CPC is for reference. You are encouraged

  9. Differential forms on electromagnetic networks

    CERN Document Server

    Balasubramanian, N V; Sen Gupta, D P

    2013-01-01

    Differential Forms on Electromagnetic Networks deals with the use of combinatorial techniques in electrical circuit, machine analysis, and the relationship between circuit quantities and electromagnetic fields. The monograph is also an introduction to the organization of field equations by the methods of differential forms. The book covers topics such as algebraic structural relations in an electric circuit; mesh and node-pair analysis; exterior differential structures; generalized Stoke's theorem and tensor analysis; and Maxwell's electromagnetic equation. Also covered in the book are the app

  10. The Textile Form of Sound

    DEFF Research Database (Denmark)

    Bendixen, Cecilie

    Sound is a part of architecture, and sound is complex. Upon this, sound is invisible. How is it then possible to design visual objects that interact with the sound? This paper addresses the problem of how to get access to the complexity of sound and how to make textile material revealing the form...... goemetry by analysing the sound pattern at a specific spot. This analysis is done theoretically with algorithmic systems and practical with waves in water. The paper describes the experiments and the findings, and explains how an analysis of sound can be catched in a textile form....

  11. Outdoor unit construction for an electric heat pump

    Science.gov (United States)

    Draper, R.; Lackey, R.S.

    1984-09-11

    The outdoor unit for an electric heat pump is provided with an upper portion containing propeller fan means for drawing air through the lower portion containing refrigerant coil means in the form of four discrete coils connected together in a subassembly forming a W shape, the unit being provided with four adjustable legs which are retracted in shipment, and are adjusted on site to elevate the unit to a particular height suitable for the particular location in which the unit is installed. 4 figs.

  12. A multiplicity logic unit

    International Nuclear Information System (INIS)

    Bialkowski, J.; Moszynski, M.; Zagorski, A.

    1981-01-01

    The logic diagram principle of operation and some details of the design of the multiplicity logic unit are presented. This unit was specially designed to fulfil the requirements of a multidetector arrangement for gamma-ray multiplicity measurements. The unit is equipped with 16 inputs controlled by a common coincidence gate. It delivers a linear output pulse with the height proportional to the multiplicity of coincidences and logic pulses corresponding to 0, 1, ... up to >= 5-fold coincidences. These last outputs are used to steer the routing unit working with the multichannel analyser. (orig.)

  13. ENERGY STAR Unit Reports

    Data.gov (United States)

    Department of Housing and Urban Development — These quarterly Federal Fiscal Year performance reports track the ENERGY STAR qualified HOME units that Participating Jurisdictions record in HUD's Integrated...

  14. Secondary Waste Form Down-Selection Data Package—Fluidized Bed Steam Reforming Waste Form

    Energy Technology Data Exchange (ETDEWEB)

    Qafoku, Nikolla; Westsik, Joseph H.; Strachan, Denis M.; Valenta, Michelle M.; Pires, Richard P.

    2011-09-12

    The Hanford Site in southeast Washington State has 56 million gallons of radioactive and chemically hazardous wastes stored in 177 underground tanks (ORP 2010). The U.S. Department of Energy (DOE), Office of River Protection (ORP), through its contractors, is constructing the Hanford Tank Waste Treatment and Immobilization Plant (WTP) to convert the radioactive and hazardous wastes into stable glass waste forms for disposal. Within the WTP, the pretreatment facility will receive the retrieved waste from the tank farms and separate it into two treated process streams. These waste streams will be vitrified, and the resulting waste canisters will be sent to offsite (high-level waste [HLW]) and onsite (immobilized low-activity waste [ILAW]) repositories. As part of the pretreatment and ILAW processing, liquid secondary wastes will be generated that will be transferred to the Effluent Treatment Facility (ETF) on the Hanford Site for further treatment. These liquid secondary wastes will be converted to stable solid waste forms that will be disposed of in the Integrated Disposal Facility (IDF). To support the selection of a waste form for the liquid secondary wastes from WTP, Washington River Protection Solutions (WRPS) has initiated secondary waste form testing work at Pacific Northwest National Laboratory (PNNL). In anticipation of a down-selection process for a waste form for the Solidification Treatment Unit to be added to the ETF, PNNL is developing data packages to support that down-selection. The objective of the data packages is to identify, evaluate, and summarize the existing information on the four waste forms being considered for stabilizing and solidifying the liquid secondary wastes. At the Hanford Site, the FBSR process is being evaluated as a supplemental technology for treating and immobilizing Hanford LAW radioactive tank waste and for treating secondary wastes from the WTP pretreatment and LAW vitrification processes.

  15. Forms of cohesion in confinement institutions

    Directory of Open Access Journals (Sweden)

    Ekaterina D. Slobodenyuk

    2015-12-01

    Full Text Available Objective to identify the diversity of cohesion forms in confinement institutions. Methods qualitative analyses based on indepth semistructured interviews. Results the study included adaptation of Western methodologies of the cohesion phenomenon analysis to the Russian reality and operationalization of the moral bases of group cohesion. This served as the bases for designing a guide for indepth semistructured interviews 10 interviews were conducted with people recently released from general and strict regime colonies. Content analysis of the interviews revealed a number of structural sections that demonstrate the diversity of cohesion forms alongside with one that is most meaningful to the prisoners and therefore the most well perceived and articulated by respondents. Analysis of the latter allowed to identify a set of groups showing different degree and nature of cohesion. By the degree of cohesion one can identify the poorly cohesive groups quotloutsquot moderately cohesive quotredsquot quotthievesquot and highly cohesive quotfightersquot. By the nature of cohesion in the prisonersrsquo community there are both groups united on the basis of social morality quotredsquot quotthievesquot and groups demonstrating a high degree of cohesion based on the social justice morality quotfightersquot. A detailed analysis of the latter group also showed that the cohesion can have both traits of morality social justice and features of social order moral. Scientific novelty using the sociopsychological theory of the moral motives in determining the bases of cohesion. Practical significance the research results can be applied for the development of sociopsychological techniques for the penal system reform.

  16. Forms of Address as Discrete Modal Operators

    Directory of Open Access Journals (Sweden)

    Wojciech Paweł Sosnowski

    2016-12-01

    Full Text Available Forms of Address as Discrete Modal Operators The category of expressions of politeness includes, among others, forms of address. Forms of address express honorification. Honorification can be defined as a special type of meaning that consists of information about the social and interpersonal relations between the speaker and the addressee, the speaker and the hearer, and the speaker and the protagonist of the predication. As far as their place in the syntactic structure is concerned, forms of address can either be integrated with the other elements of a predication or not. However, they are always part of a predication’s semantic structure. Moreover, forms of address convey the speaker’s attitude to the meaning of the predicate that they want to convey, which consequently means that forms of address also carry a modal element. Modality can be defined as a situation in which an individual is in a particular mental state, i.e. exhibits some kind of attitude to a situation or a type of situations. Forms of address can be categorised as modal operators conveying imperatives, requests, suppositions, etc. The term "operator" can be used for a unit of language when it changes the semantic structure of the predication. My research on honorification is mainly based on contemporary corpora, both monolingual and multilingual. In the present study, I analyse forms of address which carry imperative and optative meanings.   Formy adresatywne jako dyskretne operatory modalne W obrębie wyrażeń realizujących funkcje grzecznościowe znajduje się grupa form adresatywnych. Są one częścią kategorii honoryfikatywności rozumianej jako szczególny rodzaj znaczenia zawartego w treści wypowiedzi, informację o towarzysko-społecznej relacji między nadawcą a odbiorcą, nadawcą a słuchaczem oraz nadawcą a bohaterem wypowiedzi. Gramatycznie formy adresatywne mogą być zarówno zintegrowane, jak i niezintegrowane syntaktycznie z resztą wypowiedzi, ale

  17. Prototype unit for the air decontamination

    International Nuclear Information System (INIS)

    Garcia A, J.

    1991-01-01

    In this work it has the objective of to design and to manufacture an unit that took advantage of the filters of national production in appropriate form, and to offer a wide protection to the maintenance personnel that carries out the replacement, besides to be able to be installed in any position and to facilitate the adsorber installation

  18. Unit Monitors Manchester-Format Data Buses

    Science.gov (United States)

    Amador, Jose J.

    1994-01-01

    Circuit card converts data signals into convenient hexadecimal form for troubleshooting. Bus-monitoring unit converts data signals from Manchester II format used on data bus into hexadecimal format. Monitoring circuit causes hexadecimal words to display on video terminal, where test engineer compares them with hexadecimal records for troubleshooting. Circuit monitors one bus or two buses simultaneously.

  19. Severe forms of food allergy

    Directory of Open Access Journals (Sweden)

    Emanuel Sarinho

    2017-11-01

    Conclusion: Severe food allergy may occur in the form of anaphylaxis and food‐protein‐induced enterocolitis syndrome, which are increasingly observed in the pediatric emergency room; hence, pediatricians must be alert so they can provide the immediate diagnosis and treatment.

  20. Fabrication Aware Form-finding

    DEFF Research Database (Denmark)

    Egholm Pedersen, Ole; Larsen, Niels Martin; Pigram, Dave

    2014-01-01

    This paper describes a design and construction method that combines two distinct material systems with fabrication aware form-finding and file-to-factory workflows. The method enables the fluent creation of complex materially efficient structures comprising high populations of geometrically uniqu...

  1. Normal forms in Poisson geometry

    NARCIS (Netherlands)

    Marcut, I.T.

    2013-01-01

    The structure of Poisson manifolds is highly nontrivial even locally. The first important result in this direction is Conn's linearization theorem around fixed points. One of the main results of this thesis (Theorem 2) is a normal form theorem in Poisson geometry, which is the Poisson-geometric

  2. Education fees – New forms

    CERN Multimedia

    2015-01-01

    The application forms for the payment of education fees have been updated and are now available in the Admin e-guide (under the “Useful Documents” heading):   Payment of education fees (including language course fees) – AC12A (form to be used by staff members recruited before 1 January 2007, with the exception of former “local staff”).   Payment of education fees – AC12B (form to be used by staff members recruited on or after 1 January 2007, by fellows, scientific associates and guest professors and by former “local staff” whose contracts started before 1 January 2007). The Education Fees service will continue to accept the old forms until the end of the current academic year, i.e. until 31 August 2015. Members of the personnel are reminded that any false declaration or failure to declare information with a view to deceiving others or achieving a gain that would result in a financial loss for CERN or...

  3. Smooth functors vs. differential forms

    NARCIS (Netherlands)

    Schreiber, U.; Waldorf, K.

    2011-01-01

    We establish a relation between smooth 2-functors defined on the path 2-groupoid of a smooth manifold and differential forms on this manifold. This relation can be understood as a part of a dictionary between fundamental notions from category theory and differential geometry. We show that smooth

  4. Green Lubricants for Metal Forming

    DEFF Research Database (Denmark)

    Bay, Niels

    2010-01-01

    The increasing focus on legislation towards diminishing the impact on working environment as well as external environment has driven efforts to develop new, environmentally benign lubricants for metal forming. The present paper gives an overview of these efforts to substitute environmentally...

  5. How Public Opinion is Formed

    Science.gov (United States)

    Block, Edward M.

    1977-01-01

    Investigates the evolution of the definition of public relations by examining cultural and personal determinants of public opinion. Outlines functions of communicators and opinionmakers in forming and influencing public opinion. Available from: Public Relations Review, Ray Hiebert, Dean, College of Journalism, University of Maryland, College Park,…

  6. Models for Textile Composites Forming

    NARCIS (Netherlands)

    Akkerman, Remko; ten Thije, R.H.W.

    2009-01-01

    Drape of dry fabrics or prepregs was recognised as an important feature in composites forming operations from the start. In the 1950s the first mathematical models were developed based on purely kinematic arguments. The assumption of zero fibre strains and trellis deformations led to the socalled

  7. Technetium Immobilization Forms Literature Survey

    Energy Technology Data Exchange (ETDEWEB)

    Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

    2014-05-01

    Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

  8. Temporal form in interaction design

    DEFF Research Database (Denmark)

    Vallgårda, Anna; Winther, Morten Trøstrup; Mørch, Nina

    2015-01-01

    temporal forms by letting a series of expert designers reflect upon them. We borrow a framework from Boorstin’s film theory in which he distinguishes between the voyeuristic, the vicarious, and the visceral experience. We show how to use rhythms, complexity, gentle or forceful behavior, etc., to create...

  9. Spin-forming Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Switzner, Nathan; Henry, Dick

    2009-03-20

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  10. Nanodiamond particles forming photonic structures

    International Nuclear Information System (INIS)

    Grichko, Varvara; Tyler, Talmage; Grishko, Victor I; Shenderova, Olga

    2008-01-01

    Colloid suspensions of irregularly shaped, highly charged detonation nanodiamond particles are found to have unexpected optical properties, similar to those of photonic crystals. This finding is all the more surprising since the particles used in this work are far more polydisperse than those typically forming photonic crystals. Intensely iridescent structures have been fabricated using the centrifugation of aqueous suspensions of nanodiamonds

  11. Nanodiamond particles forming photonic structures

    Energy Technology Data Exchange (ETDEWEB)

    Grichko, Varvara; Tyler, Talmage; Grishko, Victor I; Shenderova, Olga [International Technology Center, 8100 Brownleigh Drive, Suite 120, Raleigh, NC 27617 (United States)], E-mail: oshenderova@itc-inc.org

    2008-06-04

    Colloid suspensions of irregularly shaped, highly charged detonation nanodiamond particles are found to have unexpected optical properties, similar to those of photonic crystals. This finding is all the more surprising since the particles used in this work are far more polydisperse than those typically forming photonic crystals. Intensely iridescent structures have been fabricated using the centrifugation of aqueous suspensions of nanodiamonds.

  12. SuperFormLab: showing SuperFormLab

    DEFF Research Database (Denmark)

    2013-01-01

    bachelor program, followed by two years of master studies. The courses are offered equally to students from other design disciplines, e.g. industrial design. Teaching is mainly in English as the program is attended by a relatively large group of non-Danish students, who seek exactly this combination......3D-printing in clay and ceramic objects shaped by your own sounds and movements! Digital form transferred via CNC-milling to ornamental ceramic wall-cladding. Brave New World… Students and their teacher at SuperFormLab, the new ceramic workshop of the School of Design at the Royal Danish Academy...... of Fine Arts in Copenhagen, will be showing results of their investigations into the potential of combining digital technologies with ceramic materials. It is now possible to shape the most complex mathematical, virtual 3D objects through the use of advanced software-programs. And more than that – you can...

  13. 31 CFR 515.321 - United States; continental United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 515.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including the Trust Territory of...

  14. 31 CFR 500.321 - United States; continental United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 500.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including U.S. trust territories...

  15. 31 CFR 535.321 - United States; continental United States.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 535.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof including the Trust Territory of...

  16. [Definition, etiology, classification and presentation forms].

    Science.gov (United States)

    Mas Garriga, Xavier

    2014-01-01

    Osteoarthritis is defined as a degenerative process affecting the joints as a result of mechanical and biological disorders that destabilize the balance between the synthesis and degradation of joint cartilage, stimulating the growth of subchondral bone; chronic synovitis is also present. Currently, the joint is considered as a functional unit that includes distinct tissues, mainly cartilage, the synovial membrane, and subchondral bone, all of which are involved in the pathogenesis of the disease. Distinct risk factors for the development of osteoarthritis have been described: general, unmodifiable risk factors (age, sex, and genetic makeup), general, modifiable risk factors (obesity and hormonal factors) and local risk factors (prior joint anomalies and joint overload). Notable among the main factors related to disease progression are joint alignment defects and generalized osteoarthritis. Several classifications of osteoarthritis have been proposed but none is particularly important for the primary care management of the disease. These classifications include etiological (primary or idiopathic forms and secondary forms) and topographical (typical and atypical localizations) classifications, the Kellgren and Lawrence classification (radiological repercussions) and that of the American College of Rheumatology for osteoarthritis of the hand, hip and knee. The prevalence of knee osteoarthritis is 10.2% in Spain and shows a marked discrepancy between clinical and radiological findings. Hand osteoarthritis, with a prevalence of symptomatic involvement of around 6.2%, has several forms of presentation (nodal osteoarthritis, generalized osteoarthritis, rhizarthrosis, and erosive osteoarthritis). Symptomatic osteoarthritis of the hip affects between 3.5% and 5.6% of persons older than 50 years and has different radiological patterns depending on femoral head migration. Copyright © 2014 Elsevier España, S.L. All rights reserved.

  17. Neighbors United for Health

    Science.gov (United States)

    Westhoff, Wayne W.; Corvin, Jaime; Virella, Irmarie

    2009-01-01

    Modeled upon the ecclesiastic community group concept of Latin America to unite and strengthen the bond between the Church and neighborhoods, a community-based organization created Vecinos Unidos por la Salud (Neighbors United for Health) to bring health messages into urban Latino neighborhoods. The model is based on five tenants, and incorporates…

  18. Smart Rocking Armour Units

    NARCIS (Netherlands)

    Hofland, B.; Arefin, Syed Shamsil; van der Lem, Cock; van gent, Marcel

    2018-01-01

    This paper describes a method to measure the rocking motion of lab-scale armour units. Sensors as found in mobile phones are used. These sensors, data-storage and battery are all embedded in the model units, such that they can be applied without wires attached to them. The technique is applied to

  19. Four crystal forms of a Bence-Jones protein

    Energy Technology Data Exchange (ETDEWEB)

    Makino, Debora L.; Henschen-Edman, Agnes H.; McPherson, Alexander, E-mail: amcphers@uci.edu [Molecular Biology and Biochemistry, University of California, Irvine, 560 Steinhaus Hall, Irvine, CA 92697-3900 (United States)

    2005-01-01

    Four crystal forms have been grown and characterized by X-ray diffraction of a Bence-Jones protein collected from the urine of a multiple myeloma patient more than 40 y ago. The trigonal crystal form may shed some light on the formation of fibrils common to certain storage diseases. Four crystal forms have been grown and characterized by X-ray diffraction of a Bence-Jones protein collected from the urine of a multiple myeloma patient more than 40 years ago. Closely related tetragonal and orthorhombic forms belonging to space groups P4{sub 3}2{sub 1}2 and P2{sub 1}2{sub 1}2{sub 1}, with unit-cell parameters a = b = 68.7, c = 182.1 and a = 67.7, b = 69.4, c = 87.3 Å, diffract to 1.5 and 1.9 Å, respectively. Two closely related trigonal forms, both belonging to space group P3{sub 1}21 with unit-cell parameters a = b = 154.3 Å but differing by a doubling of the c axis, one 46.9 Å and the other 94.0 Å, diffract to 2.9 and 2.6 Å resolution, respectively. The trigonal crystal of short c-axis length shows a positive indication of twinning. The trigonal crystal of longer c axis, which appeared only after eight months of incubation at room temperature, is likely to be composed of proteolytically degraded molecules and unlike the other crystal forms contains two entire Bence-Jones dimers in the asymmetric unit. This latter crystal form may shed some light on the formation of fibrils common to certain storage diseases.

  20. Four crystal forms of a Bence-Jones protein

    International Nuclear Information System (INIS)

    Makino, Debora L.; Henschen-Edman, Agnes H.; McPherson, Alexander

    2004-01-01

    Four crystal forms have been grown and characterized by X-ray diffraction of a Bence-Jones protein collected from the urine of a multiple myeloma patient more than 40 y ago. The trigonal crystal form may shed some light on the formation of fibrils common to certain storage diseases. Four crystal forms have been grown and characterized by X-ray diffraction of a Bence-Jones protein collected from the urine of a multiple myeloma patient more than 40 years ago. Closely related tetragonal and orthorhombic forms belonging to space groups P4 3 2 1 2 and P2 1 2 1 2 1 , with unit-cell parameters a = b = 68.7, c = 182.1 and a = 67.7, b = 69.4, c = 87.3 Å, diffract to 1.5 and 1.9 Å, respectively. Two closely related trigonal forms, both belonging to space group P3 1 21 with unit-cell parameters a = b = 154.3 Å but differing by a doubling of the c axis, one 46.9 Å and the other 94.0 Å, diffract to 2.9 and 2.6 Å resolution, respectively. The trigonal crystal of short c-axis length shows a positive indication of twinning. The trigonal crystal of longer c axis, which appeared only after eight months of incubation at room temperature, is likely to be composed of proteolytically degraded molecules and unlike the other crystal forms contains two entire Bence-Jones dimers in the asymmetric unit. This latter crystal form may shed some light on the formation of fibrils common to certain storage diseases

  1. METRIC context unit architecture

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, R.O.

    1988-01-01

    METRIC is an architecture for a simple but powerful Reduced Instruction Set Computer (RISC). Its speed comes from the simultaneous processing of several instruction streams, with instructions from the various streams being dispatched into METRIC's execution pipeline as they become available for execution. The pipeline is thus kept full, with a mix of instructions for several contexts in execution at the same time. True parallel programming is supported within a single execution unit, the METRIC Context Unit. METRIC's architecture provides for expansion through the addition of multiple Context Units and of specialized Functional Units. The architecture thus spans a range of size and performance from a single-chip microcomputer up through large and powerful multiprocessors. This research concentrates on the specification of the METRIC Context Unit at the architectural level. Performance tradeoffs made during METRIC's design are discussed, and projections of METRIC's performance are made based on simulation studies.

  2. Unsplit bipolar pulse forming line

    Science.gov (United States)

    Rhodes, Mark A [Pleasanton, CA

    2011-05-24

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  3. Strange mesonic transition form factor

    International Nuclear Information System (INIS)

    Goity, J.L.; Musolf, M.J.

    1996-01-01

    The strange-quark vector current ρ-to-π meson transition form factor is computed at one-loop order using strange meson intermediate states. A comparison is made with a φ-meson dominance model estimate. We find that one-loop contributions are comparable in magnitude to those predicted by φ-meson dominance. It is possible that the one-loop contribution can make the matrix element as large as those of the electromagnetic current mediating vector meson radiative decays. However, due to the quadratic dependence of the one-loop results on the hadronic form factor cutoff mass, a large uncertainty in the estimate of the loops is unavoidable. These results indicate that non-nucleonic strange quarks could contribute appreciable in moderate-parallel Q 2 parallel parity-violating electron-nucleus scattering measurements aimed at probing the strange-quark content of the nucleon. copyright 1996 The American Physical Society

  4. Terra firma-forme dermatosis

    Directory of Open Access Journals (Sweden)

    Emel Erkek

    2012-01-01

    Full Text Available Terra firma-forme dermatosis is characterized by ′dirty′ brown-grey cutaneous patches and plaques that can simply be eradicated by forceful swabbing with alcohol pads. The pathogenesis has been attributed to abnormal and delayed keratinization. Although affected patients present with typical lesions, the disorder is not well-known by dermatologists. In this report, we describe two patients with terra firma-forme dermatosis in the setting of xerosis cutis and atopic dermatitis. From a clinical point of view, we lay emphasis on its unique expression and diagnosis/treatment. From a histological perspective, we highlight its resemblance to dermatosis neglecta and speculate on the role of ′neglect′ in a patient with seemingly adequate hygiene. The role of urea containing emollients in the development of this disorder remains to be determined.

  5. [Various report forms and letters

    Energy Technology Data Exchange (ETDEWEB)

    Various

    2007-08-16

    The documents described here and the following may be found at the Website of the State of California Department of Conservation, Division of Oil, Gas & Geothermal Resources, http://www.consrv.ca.gov/DOG/geothermal/unit_15/Unit15.htm. GEO Operator Corporation (formerly Thermogenics, Inc. and Geothermal Resources International Operator Corporation) drilled steam production and injection wells in the northwestern portion of The Geysers geothermal field from 1967 to 1985. These wells produced steam that was sold to PG&E's power plant 15. In 1989, the plant stopped operating so the wells stopped producing and GEO Operator Corporation went bankrupt. In 1997-1998, the U.S. Environmental Protection Agency and the Division of Oil, Gas, and Geothermal Resources, with funding from the California Energy Commission, plugged and abandoned most of these idle wells because of severe wellhead corrosion. Technical data and well cuttings were salvaged from an abandoned warehouse on the GEO Operator Corporation lease. These data have recently been scanned and added to the Division's existing scanned well records. The data are unique because GEO Operator Corporation performed an unusually high number of studies, well tests, and analyses. A total of over 10,300 pages and over 340 logs are included in the scans. The reservoir engineering section alone contains over 3,300 pages of reservoir characterization, well testing, and related studies. These data will be useful to the operators at The Geysers Geothermal field, as well as the public and researchers worldwide.

  6. The integral form of supergravity

    Energy Technology Data Exchange (ETDEWEB)

    Castellani, L. [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale,Viale T. Michel, 11, 15121 Alessandria (Italy); INFN - Sezione di Torino,via P. Giuria 1, 10125 Torino (Italy); Catenacci, R. [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale,Viale T. Michel, 11, 15121 Alessandria (Italy); Gruppo Nazionale di Fisica Matematica, INdAM,P.le Aldo Moro 5, 00185 Roma (Italy); Grassi, P.A. [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale,Viale T. Michel, 11, 15121 Alessandria (Italy); INFN - Sezione di Torino,via P. Giuria 1, 10125 Torino (Italy)

    2016-10-11

    By using integral forms we derive the superspace action of D=3,N=1 supergravity as an integral on a supermanifold. The construction is based on target space picture changing operators, here playing the rôle of Poincaré duals to the lower-dimensional spacetime surfaces embedded into the supermanifold. We show how the group geometrical action based on the group manifold approach interpolates between the superspace and the component supergravity actions, thus providing another proof of their equivalence.

  7. The FORM version of MINCER

    International Nuclear Information System (INIS)

    Larin, S.A.; Academy of Sciences of the USSR, Moscow; Tkachov, F.V.; McGill Univ., Montreal, PQ; Academy of Sciences of the USSR, Moscow; Vermaseren, J.A.M.

    1991-01-01

    The program MINCER for massless three-loop Feynman diagrams of the propagator type has been reprogrammed in the language of FORM. The new version is thoroughly optimized and can be run from a utility like the UNIX make, which allows one to conveniently process large numbers of diagrams. It has been used for some calculations that were previously not practical. (author). 22 refs.; 14 figs

  8. Urban Form and City Life

    OpenAIRE

    Luque-Valdivia, J. (José)

    2011-01-01

    The compact city is often presented as an answer to sustainable urban development, the paper tries to stress the influence of urban form of the compact city itself in the kind of civic life La ciudad compacta se presenta con frecuencia como una respuesta al desarrollo urbano sostenible; el paper trata de identificar la influencia la forma urbana propia de la ciudad compacta en el tipo de vida ciudadana

  9. Forming a multinational joint venture

    International Nuclear Information System (INIS)

    Bhatia, N.K.; Garb, R.H.; Statton, T.D.

    1990-01-01

    This paper discusses the basis and mechanics for forming a multinational joint venture. The topics of the paper include the motivations for a joint venture, selection of the appropriate co-venturer, management of the multinational joint venture, and the joint venture agreement. The authors state that a joint venture is not applicable or desirable in all instances and to be successful, must be carefully planned

  10. A higher form (of) mediation

    International Nuclear Information System (INIS)

    Verlinde, Herman; Wang, L-T; Yavin, Itay; Wijnholt, Martijn

    2008-01-01

    We exhibit a simple and robust mechanism for bulk mediation of supersymmetry breaking between hidden and visible sectors localized on geometrically separated D-branes in type II string theory. The mediation proceeds via RR p-forms that couple via linear Chern-Simons terms to the abelian vector bosons on the branes. From a 4-d low energy perspective, the mechanism reduces to U(1) mediation

  11. Recall in extensive form games

    OpenAIRE

    Klaus Ritzberger

    1999-01-01

    This paper considers characterizations of perfect recall in extensive form games. It is shown that perfect recall can be expressed in terms of choices without any reference to infomation sets. When information sets are taken into account, it is decomposable into an ordering of information sets and that players do not forget what they knew nor what they did. Thus, if information sets are partially ordered, then perfect recall is implied by the player's inability to refine her information from ...

  12. New Organizational Forms and IT

    OpenAIRE

    Schwarzer, Bettina;Zerbe, Stefan;Krcmar, Helmut

    2014-01-01

    The availability of powerful IT/IS is percieved as a driving force as well as a necessary prerequisite for new organizational solutions. However, even though the close interre-latedness of organizational structure and IT/IS has been widely recognized for a long time, a thorough understanding of their linkage is still missing. The research project NOF (New Organizational Forms) aims at closing the gap between the organizational and IS discipline in order to further the understanding and provid...

  13. Status of waste form testing

    International Nuclear Information System (INIS)

    Lawroski, H.

    1984-01-01

    The promulgation of the amendment of 10 CFR Part 61 by the Nuclear Regulatory Commission of December 27, 1982 by Federal Register Notice with an effective date of December 27, 1983 established the criteria for licensing requirements, paragraph 60.56, contained the description to provide adequate stability of the site through the use of suitable waste forms. In May, 1983, the NRC published a final Branch Technical Position (BTP) paper on waste form. The position taken by the BTP was considerably more severe than indicated in 10 CFR Part 61. An extensive and expensive testing program was started in 1983. As an interim measure, the presently utilized solidification processes such as cement, Dow binder, Envirostone and bitumen, and the presently qualified High Integrity containers (HICs) were considered acceptable with the caveat that acceptable process control programs were being utilized. The NRC requested that topical reports for licenses be submitted. The topical reports were to contain test results to substantiate the acceptability of the waste forms. The test results to date show that the volume of wastes will have to increase to meet the position taken by the NRC in the BTP. This position will cause more waste to be generated which is contrary to the emphasis by states and others to reduce the volume of waste. The details of testing will be discussed in the paper to be presented

  14. Fuzzy logic of Aristotelian forms

    Energy Technology Data Exchange (ETDEWEB)

    Perlovsky, L.I. [Nichols Research Corp., Lexington, MA (United States)

    1996-12-31

    Model-based approaches to pattern recognition and machine vision have been proposed to overcome the exorbitant training requirements of earlier computational paradigms. However, uncertainties in data were found to lead to a combinatorial explosion of the computational complexity. This issue is related here to the roles of a priori knowledge vs. adaptive learning. What is the a-priori knowledge representation that supports learning? I introduce Modeling Field Theory (MFT), a model-based neural network whose adaptive learning is based on a priori models. These models combine deterministic, fuzzy, and statistical aspects to account for a priori knowledge, its fuzzy nature, and data uncertainties. In the process of learning, a priori fuzzy concepts converge to crisp or probabilistic concepts. The MFT is a convergent dynamical system of only linear computational complexity. Fuzzy logic turns out to be essential for reducing the combinatorial complexity to linear one. I will discuss the relationship of the new computational paradigm to two theories due to Aristotle: theory of Forms and logic. While theory of Forms argued that the mind cannot be based on ready-made a priori concepts, Aristotelian logic operated with just such concepts. I discuss an interpretation of MFT suggesting that its fuzzy logic, combining a-priority and adaptivity, implements Aristotelian theory of Forms (theory of mind). Thus, 2300 years after Aristotle, a logic is developed suitable for his theory of mind.

  15. Organizational forms and knowledge absorption

    Directory of Open Access Journals (Sweden)

    Radovanović Nikola

    2016-01-01

    Full Text Available Managing the entire portion of knowledge in an organization is a challenging task. At the organizational level, there can be enormous quantities of unknown, poorly valued or inefficiently applied knowledge. This is normally followed with the underdeveloped potential or inability of organizations to absorb knowledge from external sources. Facilitation of the efficient internal flow of knowledge within the established communication network may positively affect organizational capacity to absorb or identify, share and subsequently apply knowledge to commercial ends. Based on the evidences that the adoption of different organizational forms affects knowledge flows within an organization, this research analyzed the relationship between common organizational forms and absorptive capacity of organizations. In this paper, we test the hypothesis stating that the organizational structure affects knowledge absorption and exploitation in the organization. The methodology included quantitative and qualitative research method based on a questionnaire, while the data has been statistically analyzed and the hypothesis has been tested with the use of cross-tabulation and chi-square tests. The findings suggest that the type of organizational form affects knowledge absorption capacity and that having a less formalized and more flexible structure in an organization increases absorbing and exploiting opportunities of potentially valuable knowledge.

  16. Rib forming tool for tubing

    Science.gov (United States)

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  17. Modular forms a classical approach

    CERN Document Server

    Cohen, Henri

    2017-01-01

    The theory of modular forms is a fundamental tool used in many areas of mathematics and physics. It is also a very concrete and "fun" subject in itself and abounds with an amazing number of surprising identities. This comprehensive textbook, which includes numerous exercises, aims to give a complete picture of the classical aspects of the subject, with an emphasis on explicit formulas. After a number of motivating examples such as elliptic functions and theta functions, the modular group, its subgroups, and general aspects of holomorphic and nonholomorphic modular forms are explained, with an emphasis on explicit examples. The heart of the book is the classical theory developed by Hecke and continued up to the Atkin-Lehner-Li theory of newforms and including the theory of Eisenstein series, Rankin-Selberg theory, and a more general theory of theta series including the Weil representation. The final chapter explores in some detail more general types of modular forms such as half-integral weight, Hilbert, Jacob...

  18. Coated particle waste form development

    International Nuclear Information System (INIS)

    Oma, K.H.; Buckwalter, C.Q.; Chick, L.A.

    1981-12-01

    Coated particle waste forms have been developed as part of the multibarrier concept at Pacific Northwest Laboratory under the Alternative Waste Forms Program for the Department of Energy. Primary efforts were to coat simulated nuclear waste glass marbles and ceramic pellets with low-temperature pyrolytic carbon (LT-PyC) coatings via the process of chemical vapor deposition (CVD). Fluidized bed (FB) coaters, screw agitated coaters (SAC), and rotating tube coaters were used. Coating temperatures were reduced by using catalysts and plasma activation. In general, the LT-PyC coatings did not provide the expected high leach resistance as previously measured for carbon alone. The coatings were friable and often spalled off the substrate. A totally different concept, thermal spray coating, was investigated at PNL as an alternative to CVD coating. Flame spray, wire gun, and plasma gun systems were evaluated using glass, ceramic, and metallic coating materials. Metal plasma spray coatings (Al, Sn, Zn, Pb) provided a two to three orders-of-magnitude increase in chemical durability. Because the aluminum coatings were porous, the superior leach resistance must be due to either a chemical interaction or to a pH buffer effect. Because they are complex, coated waste form processes rank low in process feasibility. Of all the possible coated particle processes, plasma sprayed marbles have the best rating. Carbon coating of pellets by CVD ranked ninth when compared with ten other processes. The plasma-spray-coated marble process ranked sixth out of eleven processes

  19. Observed characteristics of auroral forms

    International Nuclear Information System (INIS)

    Davis, T.N.

    1978-01-01

    Observations indicate that the extended auroral arc is the basic form of the discrete aurora, the brightest and most obvious kind of aurora. Both motions of auroral arcs and their distortions into convoluted forms indicate the presence of shear processes involving substantial charge excesses and magnetic field-aligned currents. Consequently, strong electric fields, both horizontal and vertical, characterize the discrete aurora. The observations of auroral arcs and observations of associated charged-particle fluxes, electric fields and currents fit together into a relatively cohesive description of the auroral arc which is compatible with at least one proposed model of the causative processes. On the other hand, an equally important type of aurora - pulsating aurora - exhibits quite different characteristics which distinguish it from the discrete aurora and which are difficult to interpret satisfactorily in terms of existing proposed models of particle precipitation and excitation of auroral emission. The lack of shearing behavior in the pulsating aurora indicates that substantial electric fields are not associated with it. Transitional forms of auroras exhibit an intermediate degree of shear motion. (Auth.)

  20. Supramolecular Complexes Formed by the Self-assembly of Hydrophobic Bis(Zn(2+)-cyclen) Complexes, Copper, and Di- or Triimide Units for the Hydrolysis of Phosphate Mono- and Diesters in Two-Phase Solvent Systems (Cyclen=1,4,7,10-Tetraazacyclododecane).

    Science.gov (United States)

    Hisamatsu, Yosuke; Miyazawa, Yuya; Yoneda, Kakeru; Miyauchi, Miki; Zulkefeli, Mohd; Aoki, Shin

    2016-01-01

    We previously reported on supramolecular complexes 4 and 5, formed by the 4 : 4 : 4 or 2 : 2 : 2 assembly of a dimeric zinc(II) complex (Zn2L(1)) having 2,2'-bipyridyl linker, dianion of cyanuric acid (CA) or 5,5-diethylbarbituric acid (Bar), and copper(II) ion (Cu(2+)) in an aqueous solution. The supermolecule 4 possesses Cu2(μ-OH)2 centers and catalyzes hydrolysis of phosphate monoester dianion, mono(4-nitrophenyl)phosphate (MNP), at neutral pH. In this manuscript, we report on design and synthesis of hydrophobic supermolecules 9 and 10 by 4 : 4 : 4 and 2 : 2 : 2 self-assembly of hydrophobic Zn2L(2) and Zn2L(3) containing long alkyl chains, CA or Bar, and Cu(2+) and their phosphatase activity for the hydrolysis of MNP and bis(4-nitrophenyl)phosphate (BNP) in two-phase solvent systems. We assumed that the Cu2(μ-OH)2 active sites of 9 and 10 would be more stable in organic solvent than in aqueous solution and that product inhibition of the supermolecules might be avoided by the release of HPO4(2-) into the aqueous layer. The findings indicate that 9 and 10 exhibit phosphatase activity in the two-phase solvent system, although catalytic turnover was not observed. Furthermore, the hydrolysis of BNP catalyzed by the hydrophobic 2 : 2 : 2 supermolecules in the two-phase solvent system is described.

  1. Nosocomial Infections in Patients Admitted in Intensive Care Unit of ...

    African Journals Online (AJOL)

    9] ... Detailed history and physical examination notes were reviewed in all ... related. UTI was related to the catheter and pneumonia to ventilator. ... protein. UTI: Urinary tract infection, CVP: Central venous pressure, CFU: Colony-forming unit,.

  2. Decision unit program

    International Nuclear Information System (INIS)

    Madjar, N.; Pastor, C.; Chambon, B.; Drain, D.; Giorni, A.; Dauchy, A.

    1981-01-01

    A decision unit has been built to simplify the electronic logic set-up in multi-detectors experiments. This unit, designed with fast memories used as decision making tables, replaces conventional logic modules. Nine inputs are provided for receiving the fast detector signals (charged particles, gammas, neutrons, ...). Fifteen independent outputs allow the identification of the choosen events among the 2 9 possible events. A CAMAC interface between the unit and the computer, or a manual control auxiliary module, is used to load, in the memory, the pattern of the choosen events [fr

  3. Smart Rocking Armour Units

    OpenAIRE

    Hofland, B.; Arefin, Syed Shamsil; van der Lem, Cock; van gent, Marcel

    2018-01-01

    This paper describes a method to measure the rocking motion of lab-scale armour units. Sensors as found in mobile phones are used. These sensors, data-storage and battery are all embedded in the model units, such that they can be applied without wires attached to them. The technique is applied to double-layer units in order to compare the results to the existing knowledge for this type of armour layers. In contrast to previous research, the gyroscope reading is used to determine the (rocking)...

  4. 22 CFR 46.3 - Aliens whose departure is deemed prejudicial to the interests of the United States.

    Science.gov (United States)

    2010-04-01

    ... United States or the United Nations for the defense of any other country. (c) Any alien who seeks to... Forces of the United States and who fails to present a Registration Certificate (SSS Form No. 2) showing... defensive operations of the United States or of any nation cooperating with the United States in the...

  5. Structural racism and myocardial infarction in the United States

    OpenAIRE

    Lukachko, Alicia; Hatzenbuehler, Mark L.; Keyes, Katherine M.

    2014-01-01

    There is a growing research literature suggesting that racism is an important risk factor undermining the health of Blacks in the United States. Racism can take many forms, ranging from interpersonal interactions to institutional/structural conditions and practices. Existing research, however, tends to focus on individual forms of racial discrimination using self-report measures. Far less attention has been paid to whether structural racism may disadvantage the health of Blacks in the United ...

  6. Cernovoda construction on target for Unit 1 startup in 1994

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    AECL and the Italian company Ansaldo have formed a joint venture to complete the first unit of the five-unit station at Cernovoda, with AECL assuming overall project management. Financing of the project is being provided jointly, with $315 million form the Canadian Export Development Corp. and $175 million from the Italian government. First criticality is scheduled for October 1994, and connection to the grid in December 1994. When complete, Cernovoda will supply 30% of Romania's electricity

  7. CERAMIC WASTE FORM DATA PACKAGE

    Energy Technology Data Exchange (ETDEWEB)

    Amoroso, J.; Marra, J.

    2014-06-13

    The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

  8. Survey of concrete waste forms

    International Nuclear Information System (INIS)

    Moore, J.G.

    1981-01-01

    The incorporation of radioactive waste in cement has been widely studied for many years. It has been routinely used at nuclear research and production sites for some types of nuclear waste for almost three decades and at power reactor plants for nearly two decades. Cement has many favorable characteristics that have contributed to its popularity. It is a readily available material and has not required complex and/or expensive equipment to solidify radioactive waste. The resulting solid products are noncombustible, strong, radiation resistant, and have reasonable chemical and thermal stability. As knowledge increased on the possible dangers from radioactive waste, requirements for waste fixation became more stringent. A brief survey of some of the research efforts used to extend and improve cementitious waste hosts to meet these requirements is given in this paper. Selected data are presented from the rather extensive study of the applicability of concrete as a waste form for Savannah River defense waste and the use of polymer impregnation to reduce the leachability and improve the durability of such waste forms. Hot-pressed concretes that were developed as prospective host solids for high-level wastes are described. Highlights are given from two decades of research on cementitious waste forms at Oak Ridge National Laboratory. The development of the hydrofracture process for the disposal of all locally generated radioactive waste led to a process for the disposal of I-129 and to the current research on the German in-situ solidification process for medium-level waste and the Oak Ridge FUETAP process for all classes of waste including commercial and defense high-level wastes. Finally, some of the more recent ORNL concepts are presented for the use of cement in the disposal of inorganic and biological sludges, waste inorganic salts, trash, and krypton

  9. [Adult form of Pompe disease].

    Science.gov (United States)

    Ziółkowska-Graca, Bozena; Kania, Aleksander; Zwolińska, Grazyna; Nizankowska-Mogilnicka, Ewa

    2008-01-01

    Pompe disease (glycogen-storage disease type II) is an autosomal recessive disorder caused by a deficiency of lysosomal acid alpha-glucosidase (GAA), leading to the accumulation of glycogen in the lysosomes primarily in muscle cells. In the adult form of the disease, proximal muscle weakness is noted and muscle volume is decreased. The infantile form is usually fatal. In the adult form of the disease the prognosis is relatively good. Muscle weakness may, however, interfere with normal daily activities, and respiratory insufficiency may be associated with obstructive sleep apnea. Death usually results from respiratory failure. Effective specific treatment is not available. Enzyme replacement therapy with recombinant human GAA (rh-GAA) still remains a research area. We report the case of a 24-year-old student admitted to the Department of Pulmonary Diseases because of severe respiratory insufficiency. Clinical symptoms such as dyspnea, muscular weakness and increased daytime sleepiness had been progressing for 2 years. Clinical examination and increased blood levels of CK suggested muscle pathology. Histopathological analysis of muscle biopsy, performed under electron microscope, confirmed the presence of vacuoles containing glycogen. Specific enzymatic activity of alpha-glucosidase was analyzed confirming Pompe disease. The only effective method to treat respiratory insufficiency was bi-level positive pressure ventilation. Respiratory rehabilitation was instituted and is still continued by the patient at home. A high-protein, low-sugar diet was proposed for the patient. Because of poliglobulia low molecular weight heparin was prescribed. The patient is eligible for experimental replacement therapy with rh-GAA.

  10. Theoretical mechanics for sixth forms

    CERN Document Server

    Plumpton, C

    1971-01-01

    Theoretical Mechanics for Sixth Forms, Second Edition is a 14-chapter book that begins by elucidating the nature of theoretical mechanics. The book then describes the statics of a particle in illustration of the techniques of handling vector quantities. Subsequent chapters focus on the principle of moments, parallel forces and centers of gravity; and the application of Newton's second law to the dynamics of a particle and the ideas of work and energy, impulse and momentum, and power. The concept of friction is also explained. This volume concludes with chapters concerning motion in a circle an

  11. Terra Firma-forme Dermatosis

    Directory of Open Access Journals (Sweden)

    Anagha Ramesh Babu

    2013-01-01

    Full Text Available Terra firma-forme dermatosis is a cutaneous discoloration. ‘Dirty’ brown grey cutaneous patches and plaques that can be rid off by forceful swabbing with alcohol pads characterize it. The pathogenesis has been attributed to abnormal and delayed keratinization. It poses no medical threat. A 40-year-old male patient presented to the Department of Dermatology with a 2-3 month history of persistent pigmented patches on both upper arms. The lesions were not associated with itching or burning sensation. He gives no history of exacerbation on exposure to the sun.

  12. Tax Unit Boundaries

    Data.gov (United States)

    Kansas Data Access and Support Center — The Statewide GIS Tax Unit boundary file was created through a collaborative partnership between the State of Kansas Department of Revenue Property Valuation...

  13. Insects: An Interdisciplinary Unit

    Science.gov (United States)

    Leger, Heather

    2007-01-01

    The author talks about an interdisciplinary unit on insects, and presents activities that can help students practice communication skills (interpersonal, interpretive, and presentational) and learn about insects with hands-on activities.

  14. UnitedHealth Group

    Science.gov (United States)

    UnitedHealth Group provides accessible and affordable services, improved quality of care, coordinated health care efforts, and a supportive environment for shared decision making between patients and their physicians.

  15. Operable Unit Boundaries

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset consists of operable unit data from multiple Superfund sites in U.S. EPA Region 8. These data were acquired from multiple sources at different times and...

  16. Flywheel and power unit

    Energy Technology Data Exchange (ETDEWEB)

    Seeley, R.W.

    1992-10-28

    A power unit, e.g. for an electrically driven vehicle, incorporates a flywheel for storing kinetic energy and a battery for storing electrical energy. The battery is incorporated as a substantial part of the rotating mass of the flywheel. Preferably the unit further includes an electrical machine being a motor or generator or machine operable either as a motor or a generator for transferring energy between the battery and the flywheel and/or for the input or output of rotary energy therefrom or thereto. The motor may be used for powering the flywheel and may also operate in a regenerative mode for recharging the unit on de-acceleration of the vehicle. The unit of the invention may also be utilized as an electrical stored power source, e.g. wind or water driven. (author)

  17. Does size matter? Animal units and animal unit months

    Science.gov (United States)

    Lamar Smith; Joe Hicks; Scott Lusk; Mike Hemmovich; Shane Green; Sarah McCord; Mike Pellant; John Mitchell; Judith Dyess; Jim Sprinkle; Amanda Gearhart; Sherm Karl; Mike Hannemann; Ken Spaeth; Jason Karl; Matt Reeves; Dave Pyke; Jordan Spaak; Andrew Brischke; Del Despain; Matt Phillippi; Dave Weixelmann; Alan Bass; Jessie Page; Lori Metz; David Toledo; Emily Kachergis

    2017-01-01

    The concepts of animal units, animal unit months, and animal unit equivalents have long been used as standards for range management planning, estimating stocking rates, reporting actual use, assessing grazing fees, ranch appraisal, and other purposes. Increasing size of cattle on rangelands has led some to suggest that the definition of animal units and animal unit...

  18. A new simple form of quark mixing matrix

    Energy Technology Data Exchange (ETDEWEB)

    Qin Nan [School of Physics and State Key Laboratory of Nuclear Physics and Technology, Peking University, Beijing 100871 (China); Ma Boqiang, E-mail: mabq@pku.edu.c [School of Physics and State Key Laboratory of Nuclear Physics and Technology, Peking University, Beijing 100871 (China); Center for High Energy Physics, Peking University, Beijing 100871 (China)

    2011-01-10

    Although different parametrizations of quark mixing matrix are mathematically equivalent, the consequences of experimental analysis may be distinct. Based on the triminimal expansion of Kobayashi-Maskawa matrix around the unit matrix, we propose a new simple parametrization. Compared with the Wolfenstein parametrization, we find that the new form is not only consistent with the original one in the hierarchical structure, but also more convenient for numerical analysis and measurement of the CP-violating phase. By discussing the relation between our new form and the unitarity boomerang, we point out that along with the unitarity boomerang, this new parametrization is useful in hunting for new physics.

  19. A new simple form of quark mixing matrix

    International Nuclear Information System (INIS)

    Qin Nan; Ma Boqiang

    2011-01-01

    Although different parametrizations of quark mixing matrix are mathematically equivalent, the consequences of experimental analysis may be distinct. Based on the triminimal expansion of Kobayashi-Maskawa matrix around the unit matrix, we propose a new simple parametrization. Compared with the Wolfenstein parametrization, we find that the new form is not only consistent with the original one in the hierarchical structure, but also more convenient for numerical analysis and measurement of the CP-violating phase. By discussing the relation between our new form and the unitarity boomerang, we point out that along with the unitarity boomerang, this new parametrization is useful in hunting for new physics.

  20. Ranking production units according to marginal efficiency contribution

    DEFF Research Database (Denmark)

    Ghiyasi, Mojtaba; Hougaard, Jens Leth

    League tables associated with various forms of service activities from schools to hospitals illustrate the public need for ranking institutions by their productive performance. We present a new method for ranking production units which is based on each units marginal contribution to the technical...

  1. 48 CFR 1845.7101-3 - Unit acquisition cost.

    Science.gov (United States)

    2010-10-01

    ... production inventory and include programmed extra units to cover replacement during the fabrication process... ADMINISTRATION CONTRACT MANAGEMENT GOVERNMENT PROPERTY Forms Preparation 1845.7101-3 Unit acquisition cost. (a... production costs (for assets produced or constructed). (5) Engineering, architectural, and other outside...

  2. How Do Volcanoes Affect Human Life? Integrated Unit.

    Science.gov (United States)

    Dayton, Rebecca; Edwards, Carrie; Sisler, Michelle

    This packet contains a unit on teaching about volcanoes. The following question is addressed: How do volcanoes affect human life? The unit covers approximately three weeks of instruction and strives to present volcanoes in an holistic form. The five subject areas of art, language arts, mathematics, science, and social studies are integrated into…

  3. UniTed

    OpenAIRE

    Harma, Eero

    2010-01-01

    UniTed on Teddy boy- tyylistä inspiroitunut kevät/kesä mallisto naisille.Mallistossa yhdistyy perinteinen teddy boy- vaatetus ja klassinen feminiinisyys, sekä menneisyys ja nykyisyys. Suunnittelun lähtökohtia olivat naisellisuus, tyylikkyys ja pyrkimys luoda nykyaikaista suunnittelua menneisyydestä lainaillen. United is a teddy boy- style inspired spring/summer collection for women. The collection combines traditional Teddy boy style with classical feminity and past with the present. The b...

  4. audit of completion of radiology request form in a nigerian specialist

    African Journals Online (AJOL)

    X-ray unit of the over a period of six weeks to assess the completeness of filling of the ... outcome. Keywords: audit, radiology, request form, medical education .... times and for making business cases for expansion of services ... such risks.

  5. Special Geometry and Automorphic Forms

    CERN Document Server

    Berglund, P; Wyllard, N; Berglund, Per; Henningson, Mans; Wyllard, Niclas

    1997-01-01

    We consider special geometry of the vector multiplet moduli space in compactifications of the heterotic string on $K3 \\times T^2$ or the type IIA string on $K3$-fibered Calabi-Yau threefolds. In particular, we construct a modified dilaton that is invariant under $SO(2, n; Z)$ T-duality transformations at the non-perturbative level and regular everywhere on the moduli space. The invariant dilaton, together with a set of other coordinates that transform covariantly under $SO(2, n; Z)$, parameterize the moduli space. The construction involves a meromorphic automorphic function of $SO(2, n; Z)$, that also depends on the invariant dilaton. In the weak coupling limit, the divisor of this automorphic form is an integer linear combination of the rational quadratic divisors where the gauge symmetry is enhanced classically. We also show how the non-perturbative prepotential can be expressed in terms of meromorphic automorphic forms, by expanding a T-duality invariant quantity both in terms of the standard special coord...

  6. Form finding in elastic gridshells

    Science.gov (United States)

    Baek, Changyeob; Sageman-Furnas, Andrew O.; Jawed, Mohammad K.; Reis, Pedro M.

    2018-01-01

    Elastic gridshells comprise an initially planar network of elastic rods that are actuated into a shell-like structure by loading their extremities. The resulting actuated form derives from the elastic buckling of the rods subjected to inextensibility. We study elastic gridshells with a focus on the rational design of the final shapes. Our precision desktop experiments exhibit complex geometries, even from seemingly simple initial configurations and actuation processes. The numerical simulations capture this nonintuitive behavior with excellent quantitative agreement, allowing for an exploration of parameter space that reveals multistable states. We then turn to the theory of smooth Chebyshev nets to address the inverse design of hemispherical elastic gridshells. The results suggest that rod inextensibility, not elastic response, dictates the zeroth-order shape of an actuated elastic gridshell. As it turns out, this is the shape of a common household strainer. Therefore, the geometry of Chebyshev nets can be further used to understand elastic gridshells. In particular, we introduce a way to quantify the intrinsic shape of the empty, but enclosed regions, which we then use to rationalize the nonlocal deformation of elastic gridshells to point loading. This justifies the observed difficulty in form finding. Nevertheless, we close with an exploration of concatenating multiple elastic gridshell building blocks.

  7. Severe forms of food allergy.

    Science.gov (United States)

    Sarinho, Emanuel; Lins, Maria das Graças Moura

    To guide the diagnostic and therapeutic management of severe forms of food allergy. Search in the Medline database using the terms "severe food allergy," "anaphylaxis and food allergy," "generalized urticaria and food allergy," and "food protein-induced enterocolitis syndrome" in the last ten years, searching in the title, abstract, or keyword fields. Food allergy can be serious and life-threatening. Milk, eggs, peanuts, nuts, walnuts, wheat, sesame seeds, shrimp, fish, and fruit can precipitate allergic emergencies. The severity of reactions will depend on associated cofactors such as age, drug use at the onset of the reaction, history and persistence of asthma and/or severe allergic rhinitis, history of previous anaphylaxis, exercise, and associated diseases. For generalized urticaria and anaphylaxis, intramuscular epinephrine is the first and fundamental treatment line. For the treatment in acute phase of food-induced enterocolitis syndrome in the emergency setting, prompt hydroelectrolytic replacement, administration of methylprednisolone and ondansetron IV are necessary. It is important to recommend to the patient with food allergy to maintain the exclusion diet, seek specialized follow-up and, in those who have anaphylaxis, to emphasize the need to carry epinephrine. Severe food allergy may occur in the form of anaphylaxis and food-protein-induced enterocolitis syndrome, which are increasingly observed in the pediatric emergency room; hence, pediatricians must be alert so they can provide the immediate diagnosis and treatment. Copyright © 2017 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

  8. AMERICAN QUARTER HORSES’ BEHAVIORAL FORMS

    Directory of Open Access Journals (Sweden)

    Iryna Olexandrivna Suprun

    2016-02-01

    Full Text Available The review of basic literary sources is made out of behavior of horse. On the basis of the field researches (visual supervisions after three different aged groups of mares it is built ethograms. An ethogram of behavioral forms among mares was developed. They represent the different forms of mares’ behavior in a dynamics. The reaction of mares of the different age-related and physiology groups on appearance of extraneous objects on a pasture, their activity, hierarchy, socialization is analyzed in groups. Several main studies on equines were reviewed in ethogram. Four objects were placed into the pasture with the mares and foals including a mat, cone, halter, and mounting block. Initial interest of mares in objects was high. Herd mentality highly evident. When one horse spooked at object the whole herd followed. After 5 minutes, majority of mares and foals lose interest in objects. The major general behavior categories observed include: locomotion, comfort, and harem social. Dominance was demonstrated while looking at the objects. Dominance was also demonstrated when a mare wanted to be in a specific place or play with a specific toy, she would pin her ears back, bite, or kick at the other mare. 

  9. Freestanding midwifery unit versus obstetric unit

    DEFF Research Database (Denmark)

    Overgaard, Charlotte; Møller, Anna Margrethe; Fenger-Grøn, Morten

    2011-01-01

    low-risk women intending FMU birth and a matched control group of 839 low-risk women intending OU birth were included at the start of care in labour. OU women were individually chosen to match selected obstetric/socio-economic characteristics of FMU women. Analysis was by intention to treat. Main......Objective To compare perinatal and maternal morbidity and birth interventions in low-risk women giving birth in two freestanding midwifery units (FMUs) and two obstetric units (OUs). Design A cohort study with a matched control group. Setting The region of North Jutland, Denmark. Participants 839...... women were significantly less likely to experience an abnormal fetal heart rate (RR: 0.3, 95% CI 0.2 to 0.5), fetal–pelvic complications (0.2, 0.05 to 0.6), shoulder dystocia (0.3, 0.1 to 0.9), occipital–posterior presentation (0.5, 0.3 to 0.9) and postpartum haemorrhage >500 ml (0.4, 0.3 to 0...

  10. Development of multibarrier nuclear waste forms

    International Nuclear Information System (INIS)

    1979-03-01

    The multibarrier concept aims to separate the radionuclide-containing inner core material and the environment by the use of coatings and matrices. Two options were developed for the inner core of the multibarrier concept: supercalcine pellets and glass marbles. Supercalcine is a crystalline assemblage of mutually compatible, refractory, and leach-resistant solid solution phases incorporating high-level liquid waste ions. Supercalcine powder is produced by spray calcining the liquid waste stream to which Al 2 O 3 , CaO, SiO 2 , and SrO have been added. Supercalcine pellets are produced by disc pelletizing. The amorphous supercalcine crystallizes into solid solution phases after subsequent heat treatment. Based on the multibarrier processes described, several conclusions can be made: gravity sintering and vacuum casting are both applicable methods for metal matrix encapsulation. The multibarrier concept of glass marbles encapsulated in a vacuum-cast lead alloy provides enhanced inertness at a minimum increase in technological complexity. If it were desirable to develop a crystalline multibarrier waste form, uncoated sintered supercalcine pellets would offer enhanced inertness at a much lower level of technological complexity than glaze- or CVD-coated supercalcine. The 16-inch diameter pelletizer unit has enough capacity to handle the output of a large PNL spray calciner (52.5 kg of calcine/hr) and it can form spray-calcined material into pellets with diameters of 2 mm to 20 mm having strength enough to withstand handling without significant breakage.Chemical vapor deposition coating of supercalcine should be pursued only if a very high level of inertness is required

  11. Antibiotic Policies in the Intensive Care Unit

    Directory of Open Access Journals (Sweden)

    Nese Saltoglu

    2003-08-01

    Full Text Available The antimicrobial management of patients in the Intensive Care Units are complex. Antimicrobial resistance is an increasing problem. Effective strategies for the prevention of antimicrobial resistance in ICUs have focused on limiting the unnecessary use of antibiotics and increasing compliance with infection control practices. Antibiotic policies have been implemented to modify antibiotic use, including national or regional formulary manipulations, antibiotic restriction forms, care plans, antibiotic cycling and computer assigned antimicrobial therapy. Moreover, infectious diseases consultation is a simple way to limit antibiotic use in ICU units. To improve rational antimicrobial using a multidisiplinary approach is suggested. [Archives Medical Review Journal 2003; 12(4.000: 299-309

  12. Do atmospheric aerosols form glasses?

    Directory of Open Access Journals (Sweden)

    D. A. Pedernera

    2008-09-01

    Full Text Available A new process is presented by which water soluble organics might influence ice nucleation, ice growth, chemical reactions and water uptake of aerosols in the upper troposphere: the formation of glassy aerosol particles. Glasses are disordered amorphous (non-crystalline solids that form when a liquid is cooled without crystallization until the viscosity increases exponentially and molecular diffusion practically ceases. The glass transition temperatures, Tg, homogeneous ice nucleation temperatures, Thom, and ice melting temperatures, Tm, of various aqueous inorganic, organic and multi-component solutions are investigated with a differential scanning calorimeter. The investigated solutes are: various polyols, glucose, raffinose, levoglucosan, an aromatic compound, sulfuric acid, ammonium bisulfate and mixtures of dicarboxylic acids (M5, of dicarboxylic acids and ammonium sulfate (M5AS, of two polyols, of glucose and ammonium nitrate, and of raffinose and M5AS. The results indicate that aqueous solutions of the investigated inorganic solutes show Tg values that are too low to be of atmospheric importance. In contrast, aqueous organic and multi-component solutions readily form glasses at low but atmospherically relevant temperatures (≤230 K. To apply the laboratory data to the atmospheric situation, the measured phase transition temperatures were transformed from a concentration to a water activity scale by extrapolating water activities determined between 252 K and 313 K to lower temperatures. The obtained state diagrams reveal that the higher the molar mass of the aqueous organic or multi-component solutes, the higher Tg of their respective solutions at a given water activity. To a lesser extent, Tg also depends on the hydrophilicity of the organic solutes. Therefore, aerosol particles containing larger (≳150 g mol−1 and

  13. Das Zeichen als Form und die Form des Rechtszeichens / The Sign as Form and the Form of the Law Sign

    Directory of Open Access Journals (Sweden)

    Thomas-M. Seibert

    2014-03-01

    Full Text Available Diskutiert wird Luhmanns Konzept vom „Zeichen als Form“ vor dem Hintergrund der Formgebungen bei Peirce und Serres mit einem Erbschaftsfall im Vordergrund. Die These lautet: Zweiteilung als Ergebnis amputiert die grundlegende Operation der Formbildung, indem der Operator ausgesperrt wird. Operator ist der Interpretant, den Luhmann als Beobachter (unterschiedlicher Stufe anschließend wieder einführt. Aber er lässt sich nicht aussperren, er ist fortwährend anwesend – als Parasit (Serres. An einem praktischen Fall wird das demonstriert: Eine Frau in einem Heim verfasst ein Testament und setzt den Heimleiter und seine Frau als Erben ein. Man benutzt die Rechtsform formularmäßig und meint, mit diesem Formular das Testament fachgerecht zu verfassen und die Interpretation auszusperren. Das spätere Rechtsverfahren der Verwandten gegen den Heimleiter kehrt die Verhältnisse um. Die Operation, sich auf Recht als ein Objekt so zu beziehen, dass die Operation sich wie dieses Objekt auf Recht bezieht und damit selbst zu einem Rechtszeichen wird (Peirce, ist parasitär. Sie plant ungeplante, überraschende Störungen ein. Luhmann’s concept of the „sign as form“ is discussed in the broader context of Peirce and Serres’ concepts of formation, with an inheritance in the foreground. The assertion is: bifurcation as a result amputates the fundamental operation of form-building by excluding the operator. The operator is the interpretant, who Luhmann subsequently re-introduces as an observer (at a different level. But the interpretant does not permit itself to be excluded; it is always present – as a parasite (Serres. This is demonstrated using a practical case: A woman living in a home writes her will, in which she instates the home warden and his wife as her heirs. One uses a standardized form in the assumption that one is adhering to the prescribed legal form and thereby eliminating any need for further interpretation. The legal proceedings

  14. Rapanos v. United States & Carabell v. United States

    Science.gov (United States)

    Documents associated with guidance for implementing the definition of waters of the United States under the Clean Water Act following the Rapanos v. United States, and Carabell v. United States Supreme Court decision.

  15. Optimization of instruction and training process through content, form and methods

    International Nuclear Information System (INIS)

    Rozinek, P.

    1983-01-01

    The content orientation and development of forms and methods of nuclear power plant personnel training are described. The subject matter content consisted of two units: group and professional. Professional was divided into specialized sub-units: the primary circuit part, secondary circuit part, electric, chemistry, dosimetry. The system of final examinations is described. (J.P.)

  16. Cystic form of rheumatoid arthritis

    Energy Technology Data Exchange (ETDEWEB)

    Dijkstra, P.F.; Gubler, F.M.; Maas, A.

    1988-10-01

    A nonerosive form of rheumatoid arthritis (R.A.) was found in 62 patients out of 660 patients with R.A.. These 62 patients exhibit slowly progressive cystic changes in about the same joints in which usually erosions develop in classic R.A.. The E.S.R. is often low, half of the patients remained seronegative and there are 35 males and 27 females in the group. A smaller group of 15 out of these patients could be followed from a stage wherein the radiographs were normal to a stage of extensive cystic changes, over a period of at least 6 years. An attempt is made to delineate this group within the rheumatoid arthritis disease entity.

  17. The Form of HWID Theory

    DEFF Research Database (Denmark)

    Clemmensen, Torkil

    2015-01-01

    The aim of activities within the Human-Computer Interaction (HCI) area named Human Work Interaction Design (HWID) is to establish relationships between empirical work-domain studies and recent developments in interaction design. Recent areas of research within HWID include design sketches for work......, usability in context, work analysis for HCI, and integration of work analysis and interaction design methods for pervasive and smart workplaces. Across these areas, the question emerges what form of theory may HWID research produce? The aim with this paper is to investigate the requirements of different...... research purposes to a common framework. We take the position that we should approach HWID with a lightweight, medium-level framework that is useful to guide the application of other theories to study the relation between work analysis and interaction design. We analyse the requirements to theory found...

  18. Emerging Forms of Cultural Capital

    DEFF Research Database (Denmark)

    Prieur, Annick; Savage, Mike

    assessment of the arguments made, including those made in the studies we have been involved in ourselves (the study of cultural capital and social exclusion in the UK, and the study of the Danish city Aalborg). Secondly, the paper looks into the different claims that are made in empirical studies after...... - the claims that there are forms of emotional, subcultural or national cultural capital at work - The claim about cosmopolitanism or an international orientation as a distinctive feature of the culturally privileged classes The paper responds to the first theme announced in the call for this conference......This paper reviews recent European studies to assess whether cultural capital now has the same characteristics – or may be rather the same functions - as when Distinction was written. The paper will examine empirical applications of the concept of cultural capital in leading European studies...

  19. Forming parts over small radii

    International Nuclear Information System (INIS)

    Hazra, S K; Hughes, D J; Pereira, M P; Rolfe, B F

    2016-01-01

    Stamping simulations usually make the plane stress simplifying assumption. However, this becomes less valid when material draws around features with radius to sheet thickness ratios less than 20. Pereira, Yan and Rolfe (Wear, Vol.265, p.1687 (2008)) predicted that out-of-plane stress equivalent to material yield can occur because a line contact forms briefly at the start of the draw process. The high transient stress can cause high rates of tool wear and may cause the ‘die impact line’ cosmetic defect. In this work, we present residual strain results of a channel section that was drawn over a small radius. Using the neutron source at the Institut Laue-Langevin, in-plane and out-of-plane strains were measured in the channel part to show some support for the conclusions of Pereira et. al. (paper)

  20. Innovative forms of citizen participation

    DEFF Research Database (Denmark)

    Nyseth, Torill; Ringholm, Toril; Agger, Annika

    in practice. Some scholars claim that a reason is due to rigid and formal procedures and that the ways citizen meetings are structured tend to appeal to a limited amount of the population. At the same time, we are witnessing a proliferation in novel and more experimental ways of how citizens and authorities...... interact within the field of urban governance. This is for example seen in urban regeneration projects in Denmark and planning experiments in Norway where we are witnessing more inclusive and bottom-up initiated interactions between public authorities and local actors. The key question in this paper is......: What characterises the new and innovative forms of citizen participation in urban planning in terms of innovation? And in what ways and to what degree is input from these processes fed into the formal planning processes? Theoretically, the paper is inspired by the concept of: ‘planning...

  1. Nuclear waste forms for actinides

    Science.gov (United States)

    Ewing, Rodney C.

    1999-01-01

    The disposition of actinides, most recently 239Pu from dismantled nuclear weapons, requires effective containment of waste generated by the nuclear fuel cycle. Because actinides (e.g., 239Pu and 237Np) are long-lived, they have a major impact on risk assessments of geologic repositories. Thus, demonstrable, long-term chemical and mechanical durability are essential properties of waste forms for the immobilization of actinides. Mineralogic and geologic studies provide excellent candidate phases for immobilization and a unique database that cannot be duplicated by a purely materials science approach. The “mineralogic approach” is illustrated by a discussion of zircon as a phase for the immobilization of excess weapons plutonium. PMID:10097054

  2. The forgotten form of knowledge

    DEFF Research Database (Denmark)

    Worsøe-Schmidt, Lisbeth

    early Danish general periodicals show a different picture. During the first half of the 18th century, all sorts of stupid jokes, provocations and sharp attacks on dissenters thrived in a fashion rather similar to the kind of discourse frequently found on today's social media. But why and how did public...... discourse become more polished during the 18th century? Is it possible to generalize the process that discourse in early Danish journals underwent? And is there hope for today's public discourse on social media or are we lost in moral blindness and lack of sensitivity as Baumann puts it? The paper seeks......The forgotten form of knowledge: Similarities between early 18th century Danish journals and nowadays Facebook discourse. Contemplating the early display of the public sphere in the 18th century, one is struck by the ease with which participants conduct themselves within the emerging institution...

  3. Waste form development/test

    International Nuclear Information System (INIS)

    Kalb, P.D.; Colombo, P.

    1983-01-01

    The main objective of this study is to investigate new solidification agents relative to their potential application to wastes generated by advanced high volume reduction technologies, e.g., incinerator ash, dry solids, and ion exchange resins. Candidate materials selected for the solidification of these wastes include a modified sulfur cement and low-density polyethylene, neither of which are currently employed commerically for the solidification of low-level waste (LLW). As both the modified sulfur cement and the polyethylene are thermoplastic materials, a heated screw type extruder is utilized in the production of waste form samples for testing and evaluation. In this regard, work is being conducted to determine the range of conditions under which these solidification agents can be satisfactorily applied to the specific LLW streams and to provide information relevant to operating parameters and process control

  4. Fast form alpha-2-macroglobulin

    DEFF Research Database (Denmark)

    Biltoft, Daniel; Gram, Jørgen Brodersen; Larsen, Anette

    2017-01-01

    Objectives: Investigation of the blood compatibility requires a number of sensitive assays to quantify the activation of the blood protein cascades and cells induced by biomaterials. A global assay measuring the blood compatibility of biomaterials could be a valuable tool in such regard....... In this study, we investigated whether an enzyme-linked immunosorbent assay (ELISA), that specifically measures the electrophoretic "fast form" of α2-macroglobulin (F-α2M), could be a sensitive and global marker for activation of calcium dependent and in-dependent proteases in plasma exposed to biomaterials...... in vitro. Methods: A F-α2M specific monoclonal antibody was generated and applied in an ELISA setup. Using the F-α2M ELISA, we investigated activation of calcium dependent and in-dependent proteases by polyvinylchloride (n=10), polytetrafluoroethylene (n=10) and silicone (n=10) tubings as well as glass...

  5. Miscellaneous Waste-Form FEPs

    International Nuclear Information System (INIS)

    Schenker, A.

    2000-01-01

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs

  6. Forms and Linear Network Codes

    DEFF Research Database (Denmark)

    Hansen, Johan P.

    We present a general theory to obtain linear network codes utilizing forms and obtain explicit families of equidimensional vector spaces, in which any pair of distinct vector spaces intersect in the same small dimension. The theory is inspired by the methods of the author utilizing the osculating...... spaces of Veronese varieties. Linear network coding transmits information in terms of a basis of a vector space and the information is received as a basis of a possibly altered vector space. Ralf Koetter and Frank R. Kschischang introduced a metric on the set af vector spaces and showed that a minimal...... distance decoder for this metric achieves correct decoding if the dimension of the intersection of the transmitted and received vector space is sufficiently large. The vector spaces in our construction are equidistant in the above metric and the distance between any pair of vector spaces is large making...

  7. Severe forms of food allergy

    Directory of Open Access Journals (Sweden)

    Emanuel Sarinho

    Full Text Available Abstract Objectives: To guide the diagnostic and therapeutic management of severe forms of food allergy. Data sources: Search in the Medline database using the terms “severe food allergy,” “anaphylaxis and food allergy,” “generalized urticaria and food allergy,” and “food protein-induced enterocolitis syndrome” in the last ten years, searching in the title, abstract, or keyword fields. Summary of data: Food allergy can be serious and life-threatening. Milk, eggs, peanuts, nuts, walnuts, wheat, sesame seeds, shrimp, fish, and fruit can precipitate allergic emergencies. The severity of reactions will depend on associated cofactors such as age, drug use at the onset of the reaction, history and persistence of asthma and/or severe allergic rhinitis, history of previous anaphylaxis, exercise, and associated diseases. For generalized urticaria and anaphylaxis, intramuscular epinephrine is the first and fundamental treatment line. For the treatment in acute phase of food-induced enterocolitis syndrome in the emergency setting, prompt hydroelectrolytic replacement, administration of methylprednisolone and ondansetron IV are necessary. It is important to recommend to the patient with food allergy to maintain the exclusion diet, seek specialized follow-up and, in those who have anaphylaxis, to emphasize the need to carry epinephrine. Conclusion: Severe food allergy may occur in the form of anaphylaxis and food-protein-induced enterocolitis syndrome, which are increasingly observed in the pediatric emergency room; hence, pediatricians must be alert so they can provide the immediate diagnosis and treatment.

  8. Disjoint forms in graphical user interfaces

    NARCIS (Netherlands)

    Evers, S.; Achten, P.M.; Plasmeijer, M.J.; Loidl, H.W.

    Forms are parts of a graphical user interface (GUI) that show a set of values and allow the user to update them. The declarative form construction library FunctionalForms is extended with disjoint form combinators to capture some common patterns in which the form structure expresses a choice. We

  9. Gas-centrifuge unit

    International Nuclear Information System (INIS)

    Stark, T.M.

    1977-01-01

    An isotope-enrichment unit is described for separating a gaseous mixture feedstock including a compound of a light nuclear isotope at a predetermined concentration and a compound of a heavy nuclear isotope at a predetermined concentration into at least two unit-output fractions including a waste fraction depleted in the light isotope to a predetermined concentration and a product fraction enriched in the light isotope to a predetermined concentration. The unit comprises a first group of cascades of gas centrifuges, each cascade having an enriching stage, a stripping stage, an input, a light-fraction output, and a heavy-fraction output for separating the gaseous-mixture feed stock into light and heavy gaseous-mixture fractions; and an auxillary cascade

  10. Miscellaneous Waste-Form FEPs

    Energy Technology Data Exchange (ETDEWEB)

    A. Schenker

    2000-12-08

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

  11. Faith and Form on Screen

    Directory of Open Access Journals (Sweden)

    Henry Bacon

    2016-11-01

    Full Text Available To understand any aspect of being-in-the-world in general or cinematic experience in particular, both reductionist and holistic approaches are needed. Psychological accounts can give us only functional explanations of human behaviour or responses to signifying artifacts such as art. To understand the significance of these experiences the psychological must be complemented by a study on a level which may be termed spiritual. This line of thought is applied to analyses of Robert Bresson’s Pickpocket, starting from David Bordwell’s formalist and cognitive account of why many people experience this film as religious despite there being no explicit reference to religion. Paul Schrader’s analysis of the formal structure of this film in terms of his notion of transcendental style in film goes a step forward by explaining how the formal structure as he analyses it suggests a transcendental dimension which cannot be addressed directly. This approach connects in an illuminating way with Slavoj Žižek’s notions of the imaginary and the symbolic sphere. Bordwell’s approach, functioning on the psychological level, is basically reductionist, while Schrader’s, boosted with Žižek’s ideas as appropriated for the purposes of this article, is holistic and operative on the spiritual level. This two-tiered analysis reveals how cinematic form in Pickpocket serves as an indirect expression of faith.

  12. Mobile emergency response unit

    International Nuclear Information System (INIS)

    Kadi, W.J.; Trolan, R.T.; Becker, J.F.

    1979-01-01

    The Hotspot quick-response unit was the solution to a requirement to find, identify, and control areas of radioactive contamination at the scene of a nuclear weapons accident. The unit consists of two trucks and two trailers, and is designed to be transported by one U.S. Air Force C-141. One truck (generator truck) carries a 40 kW generator-heater-air conditioner combination, spare tires, and accessories. The other (water truck) carries supplies and a 250-gal water tank. One trailer (counting trailer) contains detecting, counting, and recording equipment. The other (decontaminating trailer) contains a shower, sink, 30-gal hot water tank, and supplies

  13. Quantum metrology foundation of units and measurements

    CERN Document Server

    Goebel, Ernst O

    2015-01-01

    The International System of Units (SI) is the world's most widely used system of measurement, used every day in commerce and science, and is the modern form of the metric system. It currently comprises the meter (m), the kilogram (kg), the second (s), the ampere (A), the kelvin (K), the candela (cd) and the mole (mol)). The system is changing though, units and unit definitions are modified through international agreements as the technology of measurement progresses, and as the precision of measurements improves. The SI is now being redefined based on constants of nature and their realization by quantum standards. Therefore, the underlying physics and technologies will receive increasing interest, and not only in the metrology community but in all fields of science. This book introduces and explains the applications of modern physics concepts to metrology, the science and the applications of measurements. A special focus is made on the use of quantum standards for the realization of the forthcoming new SI (the...

  14. Uniform-droplet spray forming

    Energy Technology Data Exchange (ETDEWEB)

    Blue, C.A.; Sikka, V.K. [Oak Ridge National Lab., TN (United States); Chun, Jung-Hoon [Massachusetts Institute of Technology, Cambridge, MA (United States); Ando, T. [Tufts Univ., Medford, MA (United States)

    1997-04-01

    The uniform-droplet process is a new method of liquid-metal atomization that results in single droplets that can be used to produce mono-size powders or sprayed-on to substrates to produce near-net shapes with tailored microstructure. The mono-sized powder-production capability of the uniform-droplet process also has the potential of permitting engineered powder blends to produce components of controlled porosity. Metal and alloy powders are commercially produced by at least three different methods: gas atomization, water atomization, and rotating disk. All three methods produce powders of a broad range in size with a very small yield of fine powders with single-sized droplets that can be used to produce mono-size powders or sprayed-on substrates to produce near-net shapes with tailored microstructures. The economical analysis has shown the process to have the potential of reducing capital cost by 50% and operating cost by 37.5% when applied to powder making. For the spray-forming process, a 25% savings is expected in both the capital and operating costs. The project is jointly carried out at Massachusetts Institute of Technology (MIT), Tuffs University, and Oak Ridge National Laboratory (ORNL). Preliminary interactions with both finished parts and powder producers have shown a strong interest in the uniform-droplet process. Systematic studies are being conducted to optimize the process parameters, understand the solidification of droplets and spray deposits, and develop a uniform-droplet-system (UDS) apparatus appropriate for processing engineering alloys.

  15. Procedural pain in neonatal units in Kenya.

    Science.gov (United States)

    Kyololo, O'Brien Munyao; Stevens, Bonnie; Gastaldo, Denise; Gisore, Peter

    2014-11-01

    To determine the nature and frequency of painful procedures and procedural pain management practices in neonatal units in Kenya. Cross-sectional survey. Level I and level II neonatal units in Kenya. Ninety-five term and preterm neonates from seven neonatal units. Medical records of neonates admitted for at least 24 h were reviewed to determine the nature and frequency of painful procedures performed in the 24 h period preceding data collection (6:00 to 6:00) as well as the pain management interventions (eg, morphine, breastfeeding, skin-to-skin contact, containment, non-nutritive sucking) that accompanied each procedure. Neonates experienced a total of 404 painful procedures over a 24 h period (mean=4.3, SD 2.0; range 1-12); 270 tissue-damaging (mean=2.85, SD 1.1; range 1-6) and 134 non-tissue-damaging procedures (mean=1.41, SD 1.2; range 0-6). Peripheral cannula insertion (27%) and intramuscular injections (22%) were the most common painful procedures. Ventilated neonates and neonates admitted in level II neonatal units had a higher number of painful procedures than those admitted in level I units (mean 4.76 vs 2.96). Only one procedure had a pain intensity score documented; and none had been performed with any form of analgesia. Neonates in Kenya were exposed to numerous tissue-damaging and non-tissue-damaging procedures without any form of analgesia. Our findings suggest that education is needed on how to assess and manage procedural pain in neonatal units in Kenya. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  16. The Dual-Agency Problem Reconsidered: A Strategic Deviance Perspective on the Franchise Form of Organizing

    OpenAIRE

    Kidwel, Roland E.; Nygaard, Arne

    2010-01-01

    Drawing on various theoretical streams, including organizational deviance, we propose that a franchisor cannot assess and control opportunism without comparative information from plural form contractual arrangements provided by both franchisee relationships and operating its own units. Moving beyond dyadic perspectives, our strategic deviance model suggests why franchisors accept deviant behavior that results from vertical and horizontal agency problems. The plural form provides benchmark inf...

  17. Transfer of manufacturing units

    DEFF Research Database (Denmark)

    Madsen, Erik Skov; Riis, Jens Ove; Sørensen, Brian Vejrum

    2008-01-01

    The ongoing and unfolding relocation of activities is one of the major trends, that calls for attention in the domain of operations management. In particular, prescriptive models outlining: stages of the process, where to locate, and how to establish the new facilities have been studied, while...... and dilemmas to be addressed when transferring manufacturing units....

  18. United States Attorney Prosecutions

    Science.gov (United States)

    1993-10-01

    property of CocaCola Bottling Company, Fayetteville, North Carolina, of a value in excess of $100.00, in violation of Title 18 United States Code, Section...another, to-wit: a Cocacola soft drink machine, the amount of damage to said personal property being more than $200.00, in violation of North Carolina

  19. Planter unit test stand

    Science.gov (United States)

    A planter test stand was developed to evaluate individual row-crop metering units in early 2013. This test stand provided the ability to quantify actual seed metering in terms of population, seed spacing, skips, and multiples over a range of meter RPMs and vacuum pressures. Preliminary data has been...

  20. United Kingdom's experience

    International Nuclear Information System (INIS)

    Drummond, S.M.

    1994-01-01

    This is a presentation of the United Kingdom's experience with power transmission open access. The topics of the presentation include the objectives of changing, commercial arrangements and economic drivers, long term effects, the effects of moving to a more competitive environment, and factors affecting open access such as political climate and market regulation

  1. Whale Teaching Unit.

    Science.gov (United States)

    Peninsula Humane Society, San Mateo, CA.

    Materials in this teaching unit are designed to foster an interest in whale preservation among intermediate grade and junior high school students. Several readings provide background information on various types of whales and the economic value of whales. Student activities include a true and false game, a crossword, and a mobile. A resource list…

  2. Multifunctional centrifugal grinding unit

    Science.gov (United States)

    Sevostyanov, V. S.; Uralskij, V. I.; Uralskij, A. V.; Sinitsa, E. V.

    2018-03-01

    The article presents scientific and engineering developments of multifunctional centrifugal grinding unit in which the selective effect of grinding bodies on the crushing material is realized, depending on its physical and mechanical characteristics and various schemes for organizing the technological process

  3. United in change

    NARCIS (Netherlands)

    Hanneke Posthumus; Josje den Ridder; Joep de Hart

    2014-01-01

    Original title: Verenigd in verandering The importance of citizens who unite in civil society organisations is broadly recognised. Organisations bind people to each other, to the community and to the political system. How are civil-society organisations in the Netherlands faring? Is there

  4. Unit III: International Conflict.

    Science.gov (United States)

    Maxey, Phyllis

    1983-01-01

    This lesson helps students understand the global network involved in international events. Students have an opportunity to examine the impact of international law and the role of international organizations, national governments, and private individuals in the effort to secure the release of United States hostages in Iran. (AM)

  5. Unit 16 - Output

    OpenAIRE

    Unit 16, CC in GIS; Star, Jeffrey L.

    1990-01-01

    This unit discusses issues related to GIS output, including the different types of output possible and the hardware for producing each. It describes text, graphic and digital data that can be generated by a GIS as well as line printers, dot matrix printers/plotters, pen plotters, optical scanners and cathode ray tubes (CRTs) as technologies for generating the output.

  6. Defining line replaceable units

    NARCIS (Netherlands)

    Parada Puig, J. E.; Basten, R. J I

    2015-01-01

    Defective capital assets may be quickly restored to their operational condition by replacing the item that has failed. The item that is replaced is called the Line Replaceable Unit (LRU), and the so-called LRU definition problem is the problem of deciding on which item to replace upon each type of

  7. In-vitro Characterization of Optimized Multi-Unit Dosage Forms of ...

    African Journals Online (AJOL)

    The optimized formulation was characterized with Differential Scanning Calorimetry and Fourier-Transform Infrared Spectroscopy. Results showed that the optimized MU tablets gave dissolution profile that was comparable with that of the designed model. The following were the dissolution parameters of the optimized MU ...

  8. In-vitro Characterization of Optimized Multi-Unit Dosage Forms of ...

    African Journals Online (AJOL)

    Michael Horsfall

    of sustained release tablet formulations in the market with a designed model. The fast release ... but release the drug in a way that the pharmaceutical scientists and engineers .... the stress needed to fracture a tablet by diametral compression.

  9. Effect of Fluoride Mouthrinse and Toothpaste on Number of Streptococcal Colony Forming Units of Dental Plaque

    OpenAIRE

    SE Jabbarifar; SA Tabibian; F Poursina

    2005-01-01

    Background: Frequent topical fluoride therapy through toothpaste, mouthrinse, professional gels and solutions causes decrease in incidence, pause and repair of dental caries in the enamel. These mechanisms are done through penetration of fluoride ions (F-) and their replacement with hydroxyl ions (OH-) of hydroxyappatite of enamel, interfere with microbial metabolism of dental plaque and bacteriostatic effect on some cariogenic bacterial strains such as streptococci. The aim of this study was...

  10. Influence of radiation fractionation on survival of mice and spleen colony-forming units

    International Nuclear Information System (INIS)

    Cronkite, E.P.; Bullis, J.E.

    1994-01-01

    C57B1/6 mice were given Gy X-rays fractionated in several ways. There was a cyclical pattern of animal survival which was correlated to the fractionation interval and which indicated a periodicity of 6 h. Ten grays given a single dose is fatal to 100% of the mice and depresses the CFU-S to about one per leg with no evidence of proliferation during the remaining life. Ten grays given in 2.5-Gy increments at 24-h intervals causes no fatalities and results in a similar CFU-S depression but is followed by an exponential increase in CFU-S over the ensuing 12 days. Although bone marrow from survivors of such treatment was comparable to control marrow in its capacity for short-term rescue, it was clearly, inferior in its capability for long-term rescue. The periodicity of 6 h suggests that the cells responsible for survival of the mice have been synchronized into more or less radiosensitive and radioresistant stages of the cell cycle as a result of the time between the 25-Gy increments. Implications for the CFU-S and long-term repopulating cells are discussed. 22 refs., 5 figs., 1 tab

  11. How grazing affects soil quality of soils formed in the glaciated northeastern United States.

    Science.gov (United States)

    Cox, Alissa H; Amador, José A

    2018-02-21

    Historically, much of the New England landscape was converted to pasture for grazing animals and harvesting hay. Both consumer demand for local sustainably produced food, and the number of small farms is increasing in RI, highlighting the importance of characterizing the effects livestock have on the quality of pasture soils. To assess how livestock affect pasture on Charlton and Canton soils series in RI, we examined soil quality in farms raising beef cattle (Bos taurus), sheep (Ovis aries), and horses (Equus ferus caballus), using hayed pastures as a control. We sampled three pastures per livestock type and three control hayed pastures in May, August, and October 2012. Hay fields and pastures grazed by sheep had statistically significant (P soil quality than pastures grazed by beef cattle or horses. This was driven by parameters including penetration resistance, bulk density, aggregate stability, and infiltration rate. Hayfields also showed higher soil quality measures than grazed pastures for organic matter content and active C. In addition, significant differences in nitrate and phosphate concentrations were observed among livestock types. Respiration and infiltration rates, pH, and ammonium concentrations, on the other hand, did not differ significantly among pasture types. When all soil quality indicators in this study were weighed equally, soil quality scores followed the order: hay > sheep > beef cattle > horses. The results of our study provide baseline data on the effect different types of livestock have on pasture soil quality in RI, which may be useful in making sound land use and agricultural management decisions.

  12. Low driving voltage simplified tandem organic light-emitting devices by using exciplex-forming hosts

    Science.gov (United States)

    Zhou, Dong-Ying; Cui, Lin-Song; Zhang, Ying-Jie; Liao, Liang-Sheng; Aziz, Hany

    2014-10-01

    Tandem organic light-emitting devices (OLEDs), i.e., OLEDs containing multiple electroluminescence (EL) units that are vertically stacked, are attracting significant interest because of their ability to realize high current efficiency and long operational lifetime. However, stacking multiple EL units in tandem OLEDs increases driving voltage and complicates fabrication process relative to their standard single unit counterparts. In this paper, we demonstrate low driving voltage tandem OLEDs via utilizing exciplex-forming hosts in the EL units instead of conventional host materials. The use of exciplex-forming hosts reduces the charge injection barriers and the trapping of charges on guest molecules, resulting in the lower driving voltage. The use of exciplex-forming hosts also allows using fewer layers, hence simpler EL configuration which is beneficial for reducing the fabrication complexity of tandem OLEDs.

  13. Crystallization and Characterization of Galdieria sulphuraria RUBISCO in Two Crystal Forms: Structural Phase Transition Observed in P21 Crystal Form

    Directory of Open Access Journals (Sweden)

    Boguslaw Stec

    2007-10-01

    Full Text Available We have isolated ribulose-1,5-bisphosphate-carboxylase/oxygenase (RUBISCOfrom the red algae Galdieria Sulphuraria. The protein crystallized in two different crystalforms, the I422 crystal form being obtained from high salt and the P21 crystal form beingobtained from lower concentration of salt and PEG. We report here the crystallization,preliminary stages of structure determination and the detection of the structural phasetransition in the P21 crystal form of G. sulphuraria RUBISCO. This red algae enzymebelongs to the hexadecameric class (L8S8 with an approximate molecular weight 0.6MDa.The phase transition in G. sulphuraria RUBISCO leads from two hexadecamers to a singlehexadecamer per asymmetric unit. The preservation of diffraction power in a phasetransition for such a large macromolecule is rare.

  14. Remote preenrollment checking of consent forms to reduce nonconformity.

    Science.gov (United States)

    Journot, Valérie; Pérusat-Villetorte, Sophie; Bouyssou, Caroline; Couffin-Cadiergues, Sandrine; Tall, Aminata; Chêne, Geneviève

    2013-01-01

    In biomedical research, the signed consent form must be checked for compliance with regulatory requirements. Checking usually is performed on site, most frequently after a participant's final enrollment. We piloted a procedure for remote preenrollment consent forms checking. We applied it in five trials and assessed its efficiency to reduce form nonconformity before participant enrollment. Our clinical trials unit (CTU) routinely uses a consent form with an additional copy that contains a pattern that partially masks the participant's name and signature. After completion and signatures by the participant and investigator, this masked copy is faxed to the CTU for checking. In case of detected nonconformity, the CTU suspends the participant's enrollment until the form is brought into compliance. We checked nonconformities of consent forms both remotely before enrollment and on site in five trials conducted in our CTU. We tabulated the number and nature of nonconformities by location of detection: at the CTU or on site. We used these data for a pseudo before-and-after analysis and estimated the efficiency of this remote checking procedure in terms of reduction of nonconformities before enrollment as compared to the standard on-site checking procedure. We searched for nonconformity determinants among characteristics of trials, consent forms, investigator sites, and participants through multivariate logistic regression so as to identify opportunities for improvement in our procedure. Five trials, starting sequentially but running concurrently, with remote preenrollment and on-site checking of consent forms from 415 participants screened in 2006-2009 led to 518 consent forms checked; 94 nonconformities were detected in 75 forms, 75 (80%) remotely and 19 more (20%) on site. Nonconformities infrequently concerned dates of signatures (7%) and information about participants (12%). Most nonconformities dealt with investigator information (76%), primarily contact information

  15. 1:250,000-scale Hydrologic Units of the United States

    Science.gov (United States)

    Steeves, Peter; Nebert, Douglas

    1994-01-01

    The Geographic Information Retrieval and Analysis System (GIRAS) was developed in the mid 70s to put into digital form a numberof data layers which were of interest to the USGS. One of these data layers was the Hydrologic Units. The map is based on the Hydrologic Unit Maps published by the U.S. Geological Survey Office of Water Data Coordination, together with the list descriptions and name of region, subregion, accounting units, and cataloging unit. The hydrologic units are encoded with an eight-digit number that indicates the hydrologic region (first two digits), hydrologic subregion (second two digits), accounting unit (third two digits), and cataloging unit (fourth two digits). The data produced by GIRAS was originally collected at a scale of 1:250K. Some areas, notably major cities in the west, were recompiled at a scale of 1:100K. In order to join the data together and use the data in a geographic information system (GIS) the data were processed in the ARC/INFO GUS software package. Within the GIS, the data were edgematched and the neatline boundaries between maps were removed to create a single data set for the conterminous

  16. 75 FR 51093 - Agency Information Collection Activities: Form I-864, Form I-864A, Form I-864EZ, and Form I-864W...

    Science.gov (United States)

    2010-08-18

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... of Homeland Security, U.S. Citizenship and Immigration Services (USCIS) will be submitting the...: Form I-864, Form I-864A, Form I-864EZ, and Form I-864W; U.S. Citizenship and Immigration Services...

  17. 49 CFR 191.19 - Report forms.

    Science.gov (United States)

    2010-10-01

    ... forms. Copies of the prescribed report forms are available without charge upon request from the address... 49 Transportation 3 2010-10-01 2010-10-01 false Report forms. 191.19 Section 191.19 Transportation... size and kind of paper. In addition, the information required by these forms may be submitted by any...

  18. A Framework for Interactively Helpful Web Forms

    DEFF Research Database (Denmark)

    Bohøj, Morten; Bouvin, Niels Olof; Gammelmark, Henrik

    2012-01-01

    AdapForms is a framework for adaptive forms, consisting of a form definition language designating structure and constraints upon acceptable input, and a software architecture that continuously validates and adapts the form presented to the user. The validation is performed server-side, which enab...

  19. Testing Weak Form Market Efficiency for Emerging Economies: A Nonlinear Approach

    OpenAIRE

    Omay, Nazli C.; Karadagli, Ece C.

    2010-01-01

    In this paper, we address weak form stock market efficiency of Emerging Economies, by testing whether the price series of these markets contain unit root. Nonlinear behavior of stock prices is well documented in the literature, and thus linear unit root tests may not be appropriate in this case. For this purpose, we employ the nonlinear unit root test procedure recently developed by Kapetanios et al. (2003) and nonlinear panel unit root test Ucar and Omay (2009) that has a better power than s...

  20. THE FACTORS FORMING QUALITY OF GRANULATED SUGAR

    Directory of Open Access Journals (Sweden)

    N. G. Kulneva

    2015-01-01

    Full Text Available Sugar, with good taste and high caloric, is one of the most popular human food. Consumers sugar must be sure that the sugar under normal conditions of use is of high quality and is not harmful to the health of the product. One reason for the decline in the quality of sugar is bacterial contamination. This is because the sugar industry products are good targets for the development of different groups of microorganisms, e.g., Bacillus subtilis, Clostridium perfringes, Leuconostoc dextranicum, Torula alba, Pseudomonas fluorescens, Sarcina lutea and others. These organisms are affected with beets, and then with sugar beet chips and diffusion juice fall into the processing line of sugar production. Their number in the diffusion juice varies and depends on many facto rs such as the quality of raw materials, the quality of cleaning beet root colonization of transporter-washing and the supply of water to the diffusion process, the temperature of the diffusion and others. In the diffusion unit has the most favorable conditions for the development of micro-organisms. Some of them, especially resistant bacteria and thermophilic bacteria or their spores, forming a capsule which protects against external influences occur in the final product sugar. When injected into the fresh crop of product (juice, syrup, they begin to multiply rapidly, causing difficulties in the process. The higher seeding beet microorganisms, the more they decompose and emit sucrose metabolism byproducts. To reduce the negative impact of microbiological and reduce losses from decomposition of sucrose conducted research on the possibility of using chlorine-containing substances in the sugar industry. It was established experimentally that the investigated chlorinated drug has bacteriostatic action and can be recommended for use in sugar beet production.

  1. METHODS OF FORMING THE STRUCTURE OF KNOWLEDGE

    Directory of Open Access Journals (Sweden)

    Tatyana A. Snegiryova

    2015-01-01

    Full Text Available The aim of the study is to describe the method of forming thestructure of knowledge of students on the basis of an integrated approach (expert, taxonomy and thesaurus and the presentation of the results of its use in the study of medical and biological physics at the Izhevsk State Medical Academy.Methods. The methods used in the work involve: an integrated approach that includes group expert method, developed by V. S. Cherepanov; taxonomy and thesaurus approach when creating a model of taxonomic structure of knowledge, as well as models of the formation of the knowledge structure.Results. The algorithm, stages and procedures of knowledge structure formation of trainees are considered in detail; the model of the given process is created; the technology of content selection of a teaching material due to the fixed time that has been released on studying of concrete discipline is shown.Scientific novelty and practical significance. Advantage of the proposed method and model of students’ knowledge structure formation consists in their flexibility: at certain adaptation they can be used while training to any discipline apart of its specificity and educational institution. Observance of all stages of the presented technology of content selection of a teaching material on the basis of an expert estimation will promote substantial increase of quality of training; make it possible to develop the unified method uniting the various points of view of teachers on knowledge formation of trainees.

  2. Suicide bombers form a new injury profile.

    Science.gov (United States)

    Aharonson-Daniel, Limor; Klein, Yoram; Peleg, Kobi

    2006-12-01

    Recent explosions of suicide bombers introduced new and unique profiles of injury. Explosives frequently included small metal parts, increasing severity of injuries, challenging both physicians and healthcare systems. Timely detonation in crowded and confined spaces further increased explosion effect. Israel National Trauma Registry data on hospitalized terror casualties between October 1, 2000 and December 31, 2004 were analyzed. A total of 1155 patients injured by explosion were studied. Nearly 30% suffered severe to critical injuries (ISS > or = 16); severe injuries (AIS > or = 3) were more prevalent than in other trauma. Triage has changed as metal parts contained in bombs penetrate the human body with great force and may result in tiny entry wounds easily concealed by hair, clothes etc. A total of 36.6% had a computed tomography (CT), 26.8% had ultrasound scanning, and 53.2% had an x-ray in the emergency department. From the emergency department, 28.3% went directly to the operating room, 10.1% to the intensive care unit, and 58.4% directly to the ward. Injuries were mostly internal, open wounds, and burns, with an excess of injuries to nerves and to blood vessels compared with other trauma mechanisms. A high rate of surgical procedures was recorded, including thoracotomies, laparotomies, craniotomies, and vascular surgery. In certain cases, there were simultaneous multiple injuries that required competing forms of treatment, such as burns and blast lung. Bombs containing metal fragments detonated by suicide bombers in crowded locations change patterns and severity of injury in a civil population. Specific injuries will require tailored approaches, an open mind, and close collaboration and cooperation between trauma surgeons to share experience, opinions, and ideas. Findings presented have implications for triage, diagnosis, treatment, hospital organization, and the definition of surge capacity.

  3. Ab initio random structure searching of organic molecular solids: assessment and validation against experimental data† †Electronic supplementary information (ESI) available: Results of similarity analysis between the 11 structures of lowest energy obtained in the AIRSS calculations and the reported structures of form III and form IV of m-ABA; unit cell parameters and volumes for all structures considered; comparison of 2θ values derived from the unit cell parameters of different structural models representing form III of m-ABA; Le Bail fitting of the experimental powder XRD pattern of form IV of m-ABA recorded at 70 K using, as the initial structural model, the reported crystal structure following geometry optimization; table of calculated (GIPAW) absolute isotropic NMR shieldings; simulated powder XRD data for the considered structures after precise geometry optimization; experimental 1H MAS NMR spectra of forms III and IV. (pdf) The calculated and experimental data for this study are provided as a supporting dataset from WRAP, the Warwick Research Archive Portal at http://wrap.warwick.ac.uk/91884. See DOI: 10.1039/c7cp04186a

    Science.gov (United States)

    Zilka, Miri; Dudenko, Dmytro V.; Hughes, Colan E.; Williams, P. Andrew; Sturniolo, Simone; Franks, W. Trent; Pickard, Chris J.

    2017-01-01

    This paper explores the capability of using the DFT-D ab initio random structure searching (AIRSS) method to generate crystal structures of organic molecular materials, focusing on a system (m-aminobenzoic acid; m-ABA) that is known from experimental studies to exhibit abundant polymorphism. Within the structural constraints selected for the AIRSS calculations (specifically, centrosymmetric structures with Z = 4 for zwitterionic m-ABA molecules), the method is shown to successfully generate the two known polymorphs of m-ABA (form III and form IV) that have these structural features. We highlight various issues that are encountered in comparing crystal structures generated by AIRSS to experimental powder X-ray diffraction (XRD) data and solid-state magic-angle spinning (MAS) NMR data, demonstrating successful fitting for some of the lowest energy structures from the AIRSS calculations against experimental low-temperature powder XRD data for known polymorphs of m-ABA, and showing that comparison of computed and experimental solid-state NMR parameters allows different hydrogen-bonding motifs to be discriminated. PMID:28944393

  4. Electroweak form factors of the Skyrmion

    International Nuclear Information System (INIS)

    Braaten, E.; Sze-Man Tse; Willcox, C.

    1986-01-01

    The electroweak form factors of baryons are studied in the semiclassical approximation to the Skyrme model. General expressions for the form factors are given for arbitrary choices of the Skyrme-model Lagrangian. They are applied to the original two-parameter Skyrme model to compute the electric, magnetic, and axial-vector form factors of the nucleon and the electromagnetic nucleon-Δ transition form factors. The dependence of the form factors on the momentum transfer is compared with phenomenological dipole parametrizations

  5. Trapping Dust to Form Planets

    Science.gov (United States)

    Kohler, Susanna

    2017-10-01

    Growing a planet from a dust grain is hard work! A new study explores how vortices in protoplanetary disks can assist this process.When Dust Growth FailsTop: ALMA image of the protoplanetary disk of V1247 Orionis, with different emission components labeled. Bottom: Synthetic image constructed from the best-fit model. [Kraus et al. 2017]Gradual accretion onto a seed particle seems like a reasonable way to grow a planet from a grain of dust; after all, planetary embryos orbit within dusty protoplanetary disks, which provides them with plenty of fuel to accrete so they can grow. Theres a challenge to this picture, though: the radial drift problem.The radial drift problem acknowledges that, as growing dust grains orbit within the disk, the drag force on them continues to grow as well. For large enough dust grains perhaps around 1 millimeter the drag force will cause the grains orbits to decay, and the particles drift into the star before they are able to grow into planetesimals and planets.A Close-Up Look with ALMASo how do we overcome the radial drift problem in order to form planets? A commonly proposed mechanism is dust trapping, in which long-lived vortices in the disk trap the dust particles, preventing them from falling inwards. This allows the particles to persist for millions of years long enough to grow beyond the radial drift barrier.Observationally, these dust-trapping vortices should have signatures: we would expect to see, at millimeter wavelengths, specific bright, asymmetric structures where the trapping occurs in protoplanetary disks. Such disk structures have been difficult to spot with past instrumentation, but the Atacama Large Millimeter/submillimeter Array (ALMA) has made some new observations of the disk V1247 Orionis that might be just what were looking for.Schematic of the authors model for the disk of V1247 Orionis. [Kraus et al. 2017]Trapped in a Vortex?ALMAs observations of V1247 Orionis are reported by a team of scientists led by Stefan

  6. Nuclear power in the United States

    International Nuclear Information System (INIS)

    Johnston, J.B.

    1985-01-01

    All over the world except in the United States, nuclear energy is a low cost, secure, environmentally acceptable form of energy. In the United States, civilian nuclear power is dead. 112 nuclear power plants have been abandoned or cancelled in the last decade, and there has been no new order for nuclear plants since 1978. It will be fortunate to have 125 operating nuclear plants in the United States in the year 2000. There are almost 90 completed nuclear power plants and about 45 under construction in the United States, but several of those under construction will eventually be abandoned. About 20 % of the electricity in the United States will be generated by nuclear plants in 2000 as compared with 13 % supplied in the last year. Under the present regulatory and institutional arrangement, American electric utilities would not consider to order a new nuclear power plant. Post-TMI nuclear plants became very expensive, and there is also ideological opposition to nuclear power. Coal-firing plants are also in the similar situation. The uncertainty about electric power demand, the cost of money, the inflation of construction cost and regulation caused the situation. (Kako, I.)

  7. Antenna unit and radio base station therewith

    Science.gov (United States)

    Kuwahara, Mikio; Doi, Nobukazu; Suzuki, Toshiro; Ishida, Yuji; Inoue, Takashi; Niida, Sumaru

    2007-04-10

    Phase and amplitude deviations, which are generated, for example, by cables connecting an array antenna of a CDMA base station and the base station, are calibrated in the baseband. The base station comprises: an antenna apparatus 1; couplers 2; an RF unit 3 that converts a receive signal to a baseband signal, converts a transmit signal to a radio frequency, and performs power control; an A/D converter 4 for converting a receive signal to a digital signal; a receive beam form unit 6 that multiplies the receive signal by semi-fixed weight; a despreader 7 for this signal input; a time-space demodulator 8 for demodulating user data; a despreader 9 for probe signal; a space modulator 14 for user data; a spreader 13 for user signal; a channel combiner 12; a Tx calibrater 11 for controlling calibration of a signal; a D/A converter 10; a unit 16 for calculation of correlation matrix for generating a probe signal used for controlling an Rx calibration system and a TX calibration system; a spreader 17 for probe signal; a power control unit 18; a D/A converter 19; an RF unit 20 for probe signal; an A/D converter 21 for signal from the couplers 2; and a despreader 22.

  8. Pre-form ceramic matrix composite cavity and method of forming and method of forming a ceramic matrix composite component

    Science.gov (United States)

    Monaghan, Philip Harold; Delvaux, John McConnell; Taxacher, Glenn Curtis

    2015-06-09

    A pre-form CMC cavity and method of forming pre-form CMC cavity for a ceramic matrix component includes providing a mandrel, applying a base ply to the mandrel, laying-up at least one CMC ply on the base ply, removing the mandrel, and densifying the base ply and the at least one CMC ply. The remaining densified base ply and at least one CMC ply form a ceramic matrix component having a desired geometry and a cavity formed therein. Also provided is a method of forming a CMC component.

  9. Principles of applying Poisson units in radiology

    International Nuclear Information System (INIS)

    Benyumovich, M.S.

    2000-01-01

    The probability that radioactive particles hit particular space patterns (e.g. cells in the squares of a count chamber net) and time intervals (e.g. radioactive particles hit a given area per time unit) follows the Poisson distribution. The mean is the only parameter from which all this distribution depends. A metrological base of counting the cells and radioactive particles is a property of the Poisson distribution assuming equality of a standard deviation to a root square of mean (property 1). The application of Poisson units in counting of blood formed elements and cultured cells was proposed by us (Russian Federation Patent No. 2126230). Poisson units relate to the means which make the property 1 valid. In a case of cells counting, the square of these units is equal to 1/10 of one of count chamber net where they count the cells. Thus one finds the means from the single cell count rate divided by 10. Finding the Poisson units when counting the radioactive particles should assume determination of a number of these particles sufficient to make equality 1 valid. To this end one should subdivide a time interval used in counting a single particle count rate into different number of equal portions (count numbers). Next one should pick out the count number ensuring the satisfaction of equality 1. Such a portion is taken as a Poisson unit in the radioactive particles count. If the flux of particles is controllable one should set up a count rate sufficient to make equality 1 valid. Operations with means obtained by with the use of Poisson units are performed on the base of approximation of the Poisson distribution by a normal one. (author)

  10. Contamination analysis unit

    International Nuclear Information System (INIS)

    Gregg, H.R.; Meltzer, M.P.

    1996-01-01

    The portable Contamination Analysis Unit (CAU) measures trace quantities of surface contamination in real time. The detector head of the portable contamination analysis unit has an opening with an O-ring seal, one or more vacuum valves and a small mass spectrometer. With the valve closed, the mass spectrometer is evacuated with one or more pumps. The O-ring seal is placed against a surface to be tested and the vacuum valve is opened. Data is collected from the mass spectrometer and a portable computer provides contamination analysis. The CAU can be used to decontaminate and decommission hazardous and radioactive surfaces by measuring residual hazardous surface contamination, such as tritium and trace organics. It provides surface contamination data for research and development applications as well as real-time process control feedback for industrial cleaning operations and can be used to determine the readiness of a surface to accept bonding or coatings. 1 fig

  11. Combustion strategy : United Kingdom

    Energy Technology Data Exchange (ETDEWEB)

    Greenhalgh, D. [Heriot-Watt Univ., Edingburgh, Scotland (United Kingdom). School of Engineering and Physical Sciences

    2009-07-01

    The United Kingdom's combustion strategy was briefly presented. Government funding sources for universities were listed. The United Kingdom Research Councils that were listed included the Arts and Humanities Research Council (AHRC) and the Biotechnology and Biological Sciences Research Council (BBSRC); the Engineering and Physical Sciences Research Council (EPSRC); the Economic and Social Research Council; the Medical Research Council; the Natural Environment Research Council; and the Science and Technology Facilities Council. The EPSRC supported 65 grants worth 30.5 million pounds. The combustion industry was noted to be dominated by three main players of which one was by far the largest. The 3 key players were Rolls-Royce; Jaguar Land Rover; and Doosan Babcock. Industry and government involvement was also discussed for the BIS Technology Strategy Board, strategy technology areas, and strategy application areas.

  12. Uranium chemistry research unit

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    The initial field of research of this Unit, established in 1973, was the basic co-ordination chemistry of uranium, thorium, copper, cobalt and nickel. Subsequently the interest of the Unit extended to extractive metallurgy relating to these metals. Under the term 'co-ordination chemistry' is understood the interaction of the central transition metal ion with surrounding atoms in its immediate vicinity (within bonding distance) and the influence they have on each other - for example, structural studies for determining the number and arrangement of co-ordinated atoms and spectrophotometric studies to establish how the f electron energy levels of uranium are influenced by the environment. New types of uranium compounds have been synthesized and studied, and the behaviour of uranium ions in non-aqueous systems has also received attention. This work can be applied to the development and study of extractants and new extractive processes for uranium

  13. Laser color recording unit

    Science.gov (United States)

    Jung, E.

    1984-05-01

    A color recording unit was designed for output and control of digitized picture data within computer controlled reproduction and picture processing systems. In order to get a color proof picture of high quality similar to a color print, together with reduced time and material consumption, a photographic color film material was exposed pixelwise by modulated laser beams of three wavelengths for red, green and blue light. Components of different manufacturers for lasers, acousto-optic modulators and polygon mirrors were tested, also different recording methods as (continuous tone mode or screened mode and with a drum or flatbed recording principle). Besides the application for the graphic arts - the proof recorder CPR 403 with continuous tone color recording with a drum scanner - such a color hardcopy peripheral unit with large picture formats and high resolution can be used in medicine, communication, and satellite picture processing.

  14. Optimally Locating MARFORRES Units

    OpenAIRE

    Salmeron, Javier; Dell, Rob

    2015-01-01

    Javier Salmeron and Rob Dell The U.S. Marine Forces Reserve (USMCR, MARFORRES) is conducting realignment studies where discretionary changes may benefit from formal mathematical analysis. This study has developed an optimization tool to guide and/or support Commander, MARFORRES (CMFR) decisions. A prototype of the optimization tool has been tested with data from the units and Reserve Training Centers (RTCs) in the San Francisco, CA and Sacramento, CA areas. Prepared for: MARFORRES, POC:...

  15. 1-Propyl-1H-indole-2,3-dione

    Directory of Open Access Journals (Sweden)

    Fatima Zahrae Qachchachi

    2016-04-01

    Full Text Available In the title compound, C11H11NO2, the 1H-indole-2,3-dione unit is essentially planar, with an r.m.s. deviation of 0.0387 (13 Å. This plane makes a dihedral angle of 72.19 (17° with the plane of the propyl substituent. In the crystal, chains propagating along the b axis are formed through C—H...O hydrogen bonds.

  16. N′-(3,5-Dibromo-2-hydroxybenzylidene-2-methylbenzohydrazide

    Directory of Open Access Journals (Sweden)

    Chun-Bao Tang

    2010-12-01

    Full Text Available The asymmetric unit of the title compound, C15H12Br2N2O2, contains two independent molecules in which the dihedral angles between the benzene rings are 49.5 (7 and 66.4 (7°. Intramolecular O—H...N hydrogen bonds generate S(6 ring motifs in each molecule. In the crystal, molecules are linked through intermolecular N—H...O hydrogen bonds, forming chains along the b axis.

  17. 2-{[(2-Methoxynaphthalen-1-ylmethyl]amino}phenol

    Directory of Open Access Journals (Sweden)

    Sara Mahdjoub

    2016-07-01

    Full Text Available The asymmetric unit of the title compound, C18H17NO2, contains two independent molecules (A and B. The dihedral angle between the naphthalene ring system and the benzene ring is 74.67 (10° in molecule A and 78.81 (9° in molecule B. In the crystal, molecules are linked by a series of C—H...π interactions, forming sheets parallel to the ab plane.

  18. Radiation quantities and units

    International Nuclear Information System (INIS)

    1980-01-01

    This report supersedes ICRU Report 19. Since ICRU Report 19 was published, a number of discussions have taken place between members of the Report Committee on Fundamental Quantities and Units and other workers in the field. Some of these discussions have resulted in the acceptance of certain modifications in the material set out in Report 19 and these modifications are incorporated in the current report. In addition, there has been some expansion and rearrangement of the material in the earlier report. In line, with providing more didactic material and useful source material for other ICRU reports, the general considerations in subsection 1.A of Report 19 have been expanded and placed in a separate subsection. The additional material includes discussions of four terms that are used in this document - quantity, unit, stochastic, and non-stochastic - along with a brief discussion of the mathematical formalism used in ICRU reports. As in ICRU Report 19, the definitions of quantities and units specifically designed for radiation protection (Part B) are separated from those of the general quantities (Part A). The inclusion of the index concept outlined in ICRU Report 25[4] required an extension of Part B

  19. United States rejoin ITER

    International Nuclear Information System (INIS)

    Roberts, M.

    2003-01-01

    Upon pressure from the United States Congress, the US Department of Energy had to withdraw from further American participation in the ITER Engineering Design Activities after the end of its commitment to the EDA in July 1998. In the years since that time, changes have taken place in both the ITER activity and the US fusion community's position on burning plasma physics. Reflecting the interest in the United States in pursuing burning plasma physics, the DOE's Office of Science commissioned three studies as part of its examination of the option of entering the Negotiations on the Agreement on the Establishment of the International Fusion Energy Organization for the Joint Implementation of the ITER Project. These were a National Academy Review Panel Report supporting the burning plasma mission; a Fusion Energy Sciences Advisory Committee (FESAC) report confirming the role of ITER in achieving fusion power production, and The Lehman Review of the ITER project costing and project management processes (for the latter one, see ITER CTA Newsletter, no. 15, December 2002). All three studies have endorsed the US return to the ITER activities. This historical decision was announced by DOE Secretary Abraham during his remarks to employees of the Department's Princeton Plasma Physics Laboratory. The United States will be working with the other Participants in the ITER Negotiations on the Agreement and is preparing to participate in the ITA

  20. United States advanced technologies

    International Nuclear Information System (INIS)

    Longenecker, J.R.

    1985-01-01

    In the United States, the advanced technologies have been applied to uranium enrichment as a means by which it can be assured that nuclear fuel cost will remain competitive in the future. The United States is strongly committed to the development of advanced enrichment technology, and has brought both advanced gas centrifuge (AGC) and atomic vapor laser isotope separation (AVLIS) programs to a point of significant technical refinement. The ability to deploy advanced technologies is the basis for the confidence in competitive future price. Unfortunately, the development of advanced technologies is capital intensive. The year 1985 is the key year for advanced technology development in the United States, since the decision on the primary enrichment technology for the future, AGC or AVLIS, will be made shortly. The background on the technology selection process, the highlights of AGC and AVLIS programs and the way to proceed after the process selection are described. The key objective is to maximize the sales volume and minimize the operating cost. This will help the utilities in other countries supply low cost energy on a reliable, long term basis. (Kako, I.)

  1. New CERN Health Insurance Scheme (CHIS) forms

    CERN Multimedia

    HR Department

    2015-01-01

    New versions of the following forms for claims and requests to the CERN Health Insurance Scheme (CHIS) have been released:   form for claiming reimbursement of medical expenses,   form for requesting advance reimbursement, and   dental estimate form (for treatments foreseen to exceed 800 CHF).   The new forms are available in French and English. They can either be completed electronically before being printed and signed, or completed in paper form. New detailed instructions can be found at the back of the claim form; CHIS members are invited to read them carefully. The electronic versions (PDF) of all the forms are available on the CHIS website and on the UNIQA Member Portal. CHIS Members are requested to use these new forms forthwith and to discard any previous version. Questions regarding the above should be addressed directly to UNIQA (72730 or 022.718 63 00 or uniqa.assurances@cern.ch).

  2. Thermoelectric generator and method of forming same

    International Nuclear Information System (INIS)

    Wilson, K.T.

    1981-01-01

    A thermoelectric device is disclosed which comprises the formation of a multiplicity of thermocouples on a substrate in a narrow strip form, the thermocouples being formed by printing with first and second inks formed of suitable different powdered metals with a proper binder or flux. The thermocouples are formed in series and the opposed coupled areas are melted to form an intermingling of the two metals and the strips may be formed in substantial lengths and rolled onto a reel, or in relatively short strip form and disposed in a side-by-side abutting relationship in substantial numbers to define a generally rectangular panel form with opposed ends in electrical connection. The method of forming the panels includes the steps of feeding a suitable substrate, either in a continuous roll or sheet form, through first and second printers to form the series connected multiplicity of thermocouples thereon. From the printers the sheet or strip passes through a melter such as an induction furnace and from the furnace it passes through a sheeter, if the strip is in roll form. The sheets are then slit into narrow strips relative to the thermocouples, printed thereon and the strips are then formed into a bundle. A predetermined number of bundles are assembled into a panel form

  3. Testing of high-level waste forms under repository conditions

    International Nuclear Information System (INIS)

    Mc Menamin, T.

    1989-01-01

    The workshop on testing of high-level waste forms under repository conditions was held on 17 to 21 October 1988 in Cadarache, France, and sponsored by the Commission of the European Communities (CEC), the Commissariat a l'energie atomique (CEA) and the Savannah River Laboratory (US DOE). Participants included representatives from Australia, Belgium, Denmark, France, Germany, Italy, Japan, the Netherlands, Sweden, Switzerland, The United Kingdom and the United States. The first part of the conference featured a workshop on in situ testing of simulated nuclear waste forms and proposed package components, with an emphasis on the materials interface interactions tests (MIIT). MIIT is a sevent-part programme that involves field testing of 15 glass and waste form systems supplied by seven countries, along with potential canister and overpack materials as well as geologic samples, in the salt geology at the Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico, USA. This effort is still in progress and these proceedings document studies and findings obtained thus far. The second part of the meeting emphasized multinational experimental studies and results derived from repository systems simulation tests (RSST), which were performed in granite, clay and salt environments

  4. Haemodialysis in a rural area: a demanding form of treatment.

    Science.gov (United States)

    Brammah, A; Young, G; Allan, A; Robertson, S; Norrie, J; Isles, C

    2001-09-01

    To determine distances travelled and time spent waiting for transport among hospital haemodialysis patients living in a rural area. Cross sectional survey comparing the subregional dialysis unit in south west Scotland with 12 of the other 13 Scottish Adult Renal Units. Forty three Dumfries and Galloway patients and 935 other Scottish patients receiving hospital haemodialysis in November 1999. At the time of the survey 8/43 (19%) Dumfries patients travelled in excess of 100 miles per dialysis day (15,000 miles per year) solely for the purpose of dialysis, compared to 20/935 (2%) elsewhere in Scotland (p Scottish Units relied on hospital car, Patient Transport Service bus or ambulance for the journey home after treatment. Dumfries patients who travelled by Patient Transport Service or hospital ambulance had to wait twice as long before they left the renal unit as patients using a dedicated hospital car or private car. Haemodialysis in a rural area has every reason to be considered a demanding form of treatment. Greater promotion of home based treatment would improve the quality of life for many of these patients, while dedicated hospital cars would reduce 'car to needle time' for those who remain on hospital haemodialysis.

  5. Current assisted superplastic forming of titanium alloy

    Directory of Open Access Journals (Sweden)

    Wang Guofeng

    2015-01-01

    Full Text Available Current assisted superplastic forming combines electric heating technology and superplastic forming technology, and can overcome some shortcomings of traditional superplastic forming effectively, such as slow heating rate, large energy loss, low production efficiency, etc. Since formability of titanium alloy at room temperature is poor, current assisted superplastic forming is suitable for titanium alloy. This paper mainly introduces the application of current assisted superplastic forming in the field of titanium alloy, including forming technology of double-hemisphere structure and bellows.

  6. 76 FR 21946 - Proposed Collection; Comment Request for Form 990-BL; Schedule A (Form 990-BL), Form 6069

    Science.gov (United States)

    2011-04-19

    ... Initial Excise Tax Return for Black Lung Benefit Trusts and Certain Related Persons, and Form 6069, Return of Excise Tax on Excess Contributions to Black Lung Benefit Trust Under Section 4953 and Computation...: Form 990-BL, Schedule A (Form 990-BL), Information and Initial Excise Tax Return for Black Lung Benefit...

  7. 8 CFR 1215.3 - Alien whose departure is deemed prejudicial to the interests of the United States.

    Science.gov (United States)

    2010-01-01

    ... United Nations for the defense of any other country. (c) Any alien who seeks to depart from the United... States and who fails to present a Registration Certificate (SSS Form No. 2) showing that he has complied... operations of the United States or of any nation cooperating with the United States in the interests of...

  8. Unique interplay between electronic states and dihedral angle for the molecular rotor of diphenyldiacetylene

    DEFF Research Database (Denmark)

    Thulstrup, Peter Waaben; Hoffmann, Søren Vrønning; Hansen, Bjarke Knud Vilster

    2011-01-01

    A new analysis of the optical properties of the molecular rotor 1,4-diphenyl-1,3-butadiyne (diphenyl-diacetylene, DPDA) is presented, taking account of the conformational dynamics. The absorption spectra are interpreted in terms of simultaneous contributions from planar as well as non-planar rota......A new analysis of the optical properties of the molecular rotor 1,4-diphenyl-1,3-butadiyne (diphenyl-diacetylene, DPDA) is presented, taking account of the conformational dynamics. The absorption spectra are interpreted in terms of simultaneous contributions from planar as well as non...

  9. DIHeDRAL: Downhole Regolith Interrogation with Helium-Assisted Drill and LIBS, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Future landed robotic missions to the lunar poles will seek to characterize the properties of subsurface regolith. Current instruments for such in-situ analysis,...

  10. DIHeDRAL: Downhole Regolith Interrogation with Helium-Assisted DRill And LIBS, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Future landed robotic missions to the lunar poles will seek to characterize the properties of subsurface regolith. Current instruments for such in-situ analysis,...

  11. INFLUENCE OF CHEMICAL COMPOUNDS ON THE FORMING OF WELDING ARC

    Directory of Open Access Journals (Sweden)

    I. О. Vakulenko

    2014-10-01

    Full Text Available Purpose. The purpose of work is a comparative analysis of chemical compounds influence on the process of forming arc welding and condition of its burning. Methodology. A wire with diameter 3 mm of low carbon steel with contain of carbon 0.15% was material for electrode. As chemical compounds, which determine the terms of arc welding forming the following compounds were used: kaolin; CaCO3 with admixtures of gypsum up to 60%; SiO2 and Fe − Si with the iron concentration up to 50%. Researches were conducted using the direct electric current and arc of reverse polarity. As a source of electric current a welding transformer of type PSO-500n was used. On the special stand initial gap between the electrode and metal plate was 1-1.5 mm. The inter electrode space was filled with the probed chemical compound and the electric arc was formed. At the moment of arc forming the values of electric current and arc voltage were determined. After the natural break of electric arc, the final gap value between electrodes was accepted as a maximal value of arc length. Findings. Experimentally the transfer of metal in interelectrode space corresponded to the tiny drop mechanism. According to external signs the relation between maximal arc length and the power of electric current has the form of exponential dependence. Specific power of electric arc at the moment of arc forming per unit of its length characterizes the environment in the interelectrode space. Originality. 1 Based on the analysis of influence of the studied chemical compounds on the formation processes of electric arc the inversely proportional relationship between the power of the electric current and the maximum arc length until the moment of its natural break is defined. 2 Ratio between the maximal arc length and the power of electric current, with the sufficiently high coefficient of correlation is submitted to the exponential dependence. Influence of the compounds under study on the process of

  12. Toxic Hazards Research Unit

    Science.gov (United States)

    1977-09-01

    greatly enlarged . Histologic examination of the neoplastic tissue growth was per- formed and a diagnosis made of reticulum cell sarcoma of multi...Guinea Pig Venipuncture femoral vein Venipuncture penis Dental exam Rodent Venipuncture tail vein Orbital sinus bleeding Heart Mark rodent using toe

  13. FormCalc 9 and extensions

    International Nuclear Information System (INIS)

    Hahn, T.; Passehr, S.; Schappacher, C.

    2016-04-01

    We present Version 9 of the Feynman-diagram calculator FormCalc and a flexible new suite of shell scripts and Mathematica packages based on FormCalc, which can be adapted and used as a template for calculations.

  14. Linearized gravity in terms of differential forms

    Science.gov (United States)

    Baykal, Ahmet; Dereli, Tekin

    2017-01-01

    A technique to linearize gravitational field equations is developed in which the perturbation metric coefficients are treated as second rank, symmetric, 1-form fields belonging to the Minkowski background spacetime by using the exterior algebra of differential forms.

  15. Crystallization behavior of nuclear waste forms

    International Nuclear Information System (INIS)

    Rusin, J.M.; Lokken, R.O.; May, R.P.; Wald, J.W.

    1981-09-01

    Several waste form options have been or are being developed for the immobilization of high-level wastes. The final selection of a waste form must take into consideration both waste form product as well as process factors. Crystallization behavior has an important role in nuclear waste form technology. For glass or vitreous waste forms, crystallization is generally controlled to a minimum by appropriate glass formulation and heat treatment schedules. With glass ceramic waste forms, crystallization is essential to convert glass products to highly crystalline waste forms with a minimum residual glass content. In the case of ceramic waste forms, additives and controlled sintering schedules are used to contain the radionuclides in specific tailored crystalline phases

  16. Article and method of forming an article

    Science.gov (United States)

    Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Dutta, Sandip; Schick, David Edward

    2017-12-26

    Provided are an article and a method of forming an article. The method includes providing a metallic powder, heating the metallic powder to a temperature sufficient to joint at least a portion of the metallic powder to form an initial layer, sequentially forming additional layers in a build direction by providing a distributed layer of the metallic powder over the initial layer and heating the distributed layer of the metallic powder, repeating the steps of sequentially forming the additional layers in the build direction to form a portion of the article having a hollow space formed in the build direction, and forming an overhang feature extending into the hollow space. The article includes an article formed by the method described herein.

  17. Guides and forms | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Information for suppliers and consultants. Consultancies: Frequently Asked Questions · Canadian Supplier — Tax and Bank Information Form · T1204 – Government services contract payments · Supplier Outside of Canada — Tax and Bank Information Form ...

  18. The Military Emergency Unit

    International Nuclear Information System (INIS)

    Gonzalez Requena, J. M.

    2007-01-01

    One of the most justified and pressing demands that society makes of the State, requiring a fast, forceful and effective response, is that it guarantees the safety of people and their assets when a disaster seriously endangers them. At the proposal of the President of the Government, the Cabinet of Ministers, in its meeting held on October 7, 2005, agreed to create the Military Emergency Unit, known since the as the UME. Its mission is to intervene anywhere in the national territory when the President of the Government, or the Minister to whom he delegates, so decides in order to assure the safety and welfare of citizens in cases of serious risk, disaster, catastrophe or any other public need. The UME is organically incorporated into the Ministry of Defense and its actions may be supported with all the available human and material needs of the Armed Forces. Availability and effectiveness, with calmness and humility, have characterized the early actions of the Military Emergency Unit and are the guidelines for future action. The first steps of this military unit have focused on a clear goal: collaboration and participation in situations whose seriousness requires the coordination of different forces in order to immediately respond to them. The UME is the States tool to join forces and, with other administration and institutions, help to rapidly and effectively deal with emergencies. It has taken its first step and achieved the capacity specified in the UME Operations Order for 2007. The 150 men and women per battalion, plus the 80 in the Gando detachment, are on active duty and have sufficient material means to deploy, if necessary and when requested by the regions, town councils an other administrative bodies, to help in the extinction of forest fires. (Author)

  19. Forming Refractory Insulation On Copper Wire

    Science.gov (United States)

    Setlock, J.; Roberts, G.

    1995-01-01

    Alternative insulating process forms flexible coat of uncured refractory insulating material on copper wire. Coated wire formed into coil or other complex shape. Wire-coating apparatus forms "green" coat on copper wire. After wire coiled, heating converts "green" coat to refractory electrical insulator. When cured to final brittle form, insulating material withstands temperatures above melting temperature of wire. Process used to make coils for motors, solenoids, and other electrical devices to be operated at high temperatures.

  20. 33 CFR 138.40 - Forms.

    Science.gov (United States)

    2010-07-01

    ...) § 138.40 Forms. All forms referred to in this subpart may be obtained from NPFC by requesting them in writing at the address given in § 138.45(a) or by clicking on the Forms link at the NPFC E-COFR Web site... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Forms. 138.40 Section 138.40...

  1. Cubical version of combinatorial differential forms

    DEFF Research Database (Denmark)

    Kock, Anders

    2010-01-01

    The theory of combinatorial differential forms is usually presented in simplicial terms. We present here a cubical version; it depends on the possibility of forming affine combinations of mutual neighbour points in a manifold, in the context of synthetic differential geometry.......The theory of combinatorial differential forms is usually presented in simplicial terms. We present here a cubical version; it depends on the possibility of forming affine combinations of mutual neighbour points in a manifold, in the context of synthetic differential geometry....

  2. Analysis of forming limit in tube hydroforming

    International Nuclear Information System (INIS)

    Kim, Chan Il; Yang, Seung Hang; Kim, Young Suk

    2013-01-01

    The automotive industry has shown increasing interest in tube hydroforming. Despite many automobile structural parts being produced from cylindrical tubes, failures frequently occur during tube hydroforming under improper forming conditions. These problems include wrinkling, buckling, folding back, and bursting. We perform analytical studies to determine forming limits in tube hydroforming and demonstrate how these forming limits are influenced by the loading path. Theoretical results for the forming limits of wrinkling and bursting are compared with experimental results for an aluminum tube.

  3. Unit for air decontamination

    International Nuclear Information System (INIS)

    Mariano H, E.

    1991-02-01

    To fulfill the applicable requirements of safety to the ventilation systems in nuclear facilities, it is necessary to make a cleaning of the air that hurtles to the atmosphere. For that which was designed and it manufactured an unit for decontamination of the air for the Pilot plant of production of Nuclear Fuel that this built one with national parts, uses Hepa national filters and the design can adapt for different dimensions of filters, also can be added a lodging for a prefilter or to adopt two Hepa filters. (Author)

  4. Waste Water Treatment Unit

    International Nuclear Information System (INIS)

    Ramadan, A.E.K.

    2004-01-01

    A wastewater treatment plant to treat both the sanitary and industrial effluent originated from process, utilities and off site units of the refinery is described. The purpose is to obtain at the end of the treatment plant, a water quality that is in compliance with contractual requirements and relevant environmental regulations. first treatment (pretreatment). Primary de-oiling, Equalization, Neutralization, Secondary de-oiling. Second treatment (Biological), The mechanism of BOD removal, Biological flocculation, Nutrient requirements, Nitrification, De-nitrification, Effect of temperature, Effect of ph, Toxicity

  5. Applied Meteorology Unit (AMU)

    Science.gov (United States)

    Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Wheeler, Mark

    2010-01-01

    This report summarizes the Applied Meteorology Unit (AMU) activities for the first quarter of Fiscal Year 2010 (October - December 2009). A detailed project schedule is included in the Appendix. Included tasks are: (1) Peak Wind Tool for User Launch Commit Criteria (LCC), (2) Objective Lightning Probability Tool, Phase III, (3) Peak Wind Tool for General Forecasting, Phase II, (4) Upgrade Summer Severe Weather Tool in Meteorological Interactive Data Display System (MIDDS), (5) Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS) Update and Maintainability, (5) Verify 12-km resolution North American Model (MesoNAM) Performance, and (5) Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) Graphical User Interface.

  6. Stability of the spherical form of nuclei

    International Nuclear Information System (INIS)

    Sabry, A.A.

    1976-08-01

    An extension of the mass formula for a spherical nucleus in the drop model to include a largely deformed nucleus of different forms is investigated. It is found that although the spherical form is stable under small deformations from equilibrium, there exists for heavier nuclei another more favourable stable form, which can be approximated by two, or three touching prolate ellipsoids of revolution

  7. Two Forms of Philosophical Argument or Critique

    Science.gov (United States)

    Marshall, James D.

    2004-01-01

    In this paper the author looks at two forms of philosophical argument or critique. These are derived by himself from the work of the late Kantian scholar, Stephan Korner who, in his book "What is Philosophy?" (1969), draws a number of distinctions between different forms of "philosophical" argument or critique. The two forms of derived argument,…

  8. 8 CFR 265.1 - Forms.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Forms. 265.1 Section 265.1 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS NOTICES OF ADDRESS § 265.1 Forms. Except... under section 262 of the Act shall report each change of address and new address within 10 days on Form...

  9. 25 CFR 67.6 - Application forms.

    Science.gov (United States)

    2010-04-01

    ... application form is filed by a sponsor, the name and address of the sponsor and the sponsor's relationship to... the applicant's mailing address on the application form. Thereafter, the applicant or sponsor shall... applicant. Otherwise, the mailing address as stated on the application form shall be accepted as the address...

  10. 25 CFR 61.6 - Application forms.

    Science.gov (United States)

    2010-04-01

    ... is claimed. (2) If the application form is filed by a sponsor, the name and address of sponsor and... furnish the applicant's mailing address on the application form. Thereafter, the applicant or sponsor... identification of the application, otherwise the mailing address as stated on the form shall be acceptable as the...

  11. Method of forming composite fiber blends

    Science.gov (United States)

    McMahon, Paul E. (Inventor); Chung, Tai-Shung (Inventor); Ying, Lincoln (Inventor)

    1989-01-01

    The instant invention involves a process used in preparing fibrous tows which may be formed into polymeric plastic composites. The process involves the steps of (a) forming a tow of strong filamentary materials; (b) forming a thermoplastic polymeric fiber; (c) intermixing the two tows; and (d) withdrawing the intermixed tow for further use.

  12. 29 CFR 1904.29 - Forms.

    Science.gov (United States)

    2010-07-01

    ... OSHA 300 Log. Instead, enter “privacy case” in the space normally used for the employee's name. This...) Basic requirement. You must use OSHA 300, 300-A, and 301 forms, or equivalent forms, for recordable injuries and illnesses. The OSHA 300 form is called the Log of Work-Related Injuries and Illnesses, the 300...

  13. International law and United Nations

    Directory of Open Access Journals (Sweden)

    Savić Matej

    2012-01-01

    Full Text Available Along with centuries-lasting open military pretensions of world superpowers, modern diplomacy has developed, as beginning a war, as well as coming to peace demanded political activity which resulted, first in signing, and then coming into effect of international documents, on the basis of which, a foundation for the modern international order has been cast. Further on, by the formation of international organizations, codification has been allowed, as well as a progressive development of international law. Additionally, in the sense of preserving international peace and security, first the League of Nations was formed, and following the ending of World War II, the UN. Generally, the functioning of the United Nation's organs, has been regulated by legal rules, however political goals, tendencies, and mechanisms which the member states are using determine greatly the activity above all of the Security Council, but furthermore of the General Assembly, as a plenary organ. Nevertheless, the achieved results of the Commission for International Law in the meaning of creation of international conventions, as well as state adhering to the same, present unassailable achievements in the sense of development of international law. On the other hand, tendencies of motion of international relationships are aimed at establishing a multi-polar system in the international community. Today, the political scene is assuming a new appearance, by which the nearly built international system is already awaiting further progressive development.

  14. Pricing unit-linked insurance with guaranteed benefit

    Science.gov (United States)

    Iqbal, M.; Novkaniza, F.; Novita, M.

    2017-07-01

    Unit-linked insurance is an investment-linked insurance, that is, the given benefit is the premium investment out-come. Recently, the most widely marketed insurance in the industry is unit-linked insurance with guaranteed benefit. With guaranteed benefit applied, the insurance benefits form is similar to the payoff form of European call option. Thereby, pricing European call option is involved in pricing unit-linked insurance with guaranteed benefit. The dynamics of investment outcome is assumed to follow stochastic interest rate. Hence, change of measure methods is used in pricing unit-linked insurance. The discount factor with stochastic interest rate needs to be modified as well to be zero coupon bond price. Eventually, the insurance premium is calculated by equivalence principle with guaranteed benefit and insurance period explicitly given.

  15. An ISOLDE target unit

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    A good dozen different targets are available for ISOLDE, made of different materials and equipped with different kinds of ion-sources, according to the needs of the experiments. Each separator (GPS: general purpose; HRS: high resolution) has its own target. Because of the high radiation levels, robots effect the target changes, about 80 times per year. In the standard unit shown in picture _01, the target is the cylindrical object in the front. It contains uranium-carbide kept at a temperature of 2200 deg C, necessary for the isotopes to be able to escape. At either end, one sees the heater current leads, carrying 700 A. The Booster beam, some 3E13 protons per pulse, enters the target from left. The evaporated isotope atoms enter a hot-plasma ion source (the black object behind the target). The whole unit sits at 60 kV potential (pulsed in synchronism with the arrival of the Booster beam) which accelerates the ions (away from the viewer) towards one of the 2 separators.

  16. The United Kingdom

    International Nuclear Information System (INIS)

    Jones, P.M.S.

    1987-01-01

    The history of nuclear development in the United Kingdom is traced, together with the factors (eg electricity demand, fossil fuel prices, political policy) that have influenced policy choices. Many of the research establishments and the fissile material production plants were established in the late 1940s. In these early years the civil and military development programmes were not separate. The initial growth period was in the 1950s when the plan was to build twelve reactors in three groups of four over ten years. The first were to be Magnox type reactors. This was trebled in 1957 and the advanced gas cooled reactor was developed. The Windscale fire in 1957 affected confidence in the nuclear programme. However, five AGR twin-reactor stations were ordered in 1964. These ran into construction problems and delay and it was not until 1980 that more new units were contemplated. The plan then was to build a pressurized water reactor at Sizewell-B. A delay to allow for the public inquiry put back the start of this until 1987 with commissioning planned for 1994. A list of the UK nuclear power stations is given and their operating performance discussed. The present situation and future prospects for nuclear power are reviewed. (U.K.)

  17. A New Nonlinear Unit Root Test with Fourier Function

    OpenAIRE

    Güriş, Burak

    2017-01-01

    Traditional unit root tests display a tendency to be nonstationary in the case of structural breaks and nonlinearity. To eliminate this problem this paper proposes a new flexible Fourier form nonlinear unit root test. This test eliminates this problem to add structural breaks and nonlinearity together to the test procedure. In this test procedure, structural breaks are modeled by means of a Fourier function and nonlinear adjustment is modeled by means of an Exponential Smooth Threshold Autore...

  18. Variational principles for locally variational forms

    International Nuclear Information System (INIS)

    Brajercik, J.; Krupka, D.

    2005-01-01

    We present the theory of higher order local variational principles in fibered manifolds, in which the fundamental global concept is a locally variational dynamical form. Any two Lepage forms, defining a local variational principle for this form, differ on intersection of their domains, by a variationally trivial form. In this sense, but in a different geometric setting, the local variational principles satisfy analogous properties as the variational functionals of the Chern-Simons type. The resulting theory of extremals and symmetries extends the first order theories of the Lagrange-Souriau form, presented by Grigore and Popp, and closed equivalents of the first order Euler-Lagrange forms of Hakova and Krupkova. Conceptually, our approach differs from Prieto, who uses the Poincare-Cartan forms, which do not have higher order global analogues

  19. Functional unit for a processor

    NARCIS (Netherlands)

    Rohani, A.; Kerkhoff, Hans G.

    2013-01-01

    The invention relates to a functional unit for a processor, such as a Very Large Instruction Word Processor. The invention further relates to a processor comprising at least one such functional unit. The invention further relates to a functional unit and processor capable of mitigating the effect of

  20. Design of hydraulic recuperation unit

    Directory of Open Access Journals (Sweden)

    Jandourek Pavel

    2016-01-01

    Full Text Available This article deals with design and measurement of hydraulic recuperation unit. Recuperation unit consist of radial turbine and axial pump, which are coupled on the same shaft. Speed of shaft with impellers are 6000 1/min. For economic reasons, is design of recuperation unit performed using commercially manufactured propellers.

  1. Snakes: An Integrated Unit Plan.

    Science.gov (United States)

    Lawrence, Lisa

    This document presents an integrated unit plan on snakes targeting second grade students. Objectives of the unit include developing concepts of living things, understanding the contribution and importance of snakes to the environment, and making connections between different disciplines. The unit integrates the topic of snakes into the areas of…

  2. Inlet Geomorphology Evolution Work Unit

    Science.gov (United States)

    2015-10-30

    Coastal Inlets Research Program Inlet Geomorphology Evolution Work Unit The Inlet Geomorphology Evolution work unit of the CIRP develops methods...morphologic response. Presently, the primary tool of the Inlet Geomorphology Evolution work unit is the Sediment Mobility Tool (SMT), which allows the user

  3. On the Choice Address Forms: Intimate Address Forms as In-Group Identity Markers of Black South Africans in "Invictus" Movie

    Science.gov (United States)

    Prihantoro

    2012-01-01

    "Invictus" is a movie which is adapted from a true story of how the South African President, Nelson Mandela, tried to unite South Africa by supporting the national rugby team, Springbok, which used to be the symbol of Apartheid. His relation with other characters in this movie is reflected from the address forms and the choice is…

  4. United Arab Emirates.

    Science.gov (United States)

    1985-02-01

    This discussion of the United Arab Emirates focuses on the following: the people; geography; history; government; political conditions; defense; the economy; foreign relations; and relations between the US and the United Arab Emirates. In 1983 the population was estimated at 1,194,000. In 1984 the annual growth rate was negative. Life expectancy is about 60 years. Fewer than 20% of the population are UAE citizens. Indigenous Emiris are Arab; the rest of the population includes significant numbers of other Arabs -- Palestinians, Egyptians, Jordanians, Yemenis, Omanis, as well as many Iranians, Pakistanis, Indians, and West Europeans, especially in Dubai. The UAE is in the eastern Arabian Peninsula, bounded on the north by the Persian Gulf. European and Arab pirates roamed the Trucial Coast area from the 17th century into the 19th century. Early British expeditions against the pirates led to further campaigns against their headquarters. Piracy continued intermittently until 1835, when the shaikhs agreed not to engage in hostilities at sea. Primarily in reaction to the ambitions of other European countries, the UK and the Trucial States established closer bonds in an 1892 treaty. In 1968 the British government announced its decision, reaffirmed in March 1971, to end the treaty relationship with the gulf shaikhdoms. When the British protective treaty with the Trucial Shaikhdoms ended on December 1, they became fully independent. On December 2, 1971, 6 of them entered into a union called the United Arab Emirates. The 7th, Ras al-Khaimah, joined in early 1972. Administratively, the UAE is a loose federation of 7 emirates, each with its own ruler. The pace at which local government in each emirate is evolving, from traditional to modern, is set primarily by the ruler. Under the provisional constitution of 1971, each emirate reserves considerable powers, including control over mineral rights, taxation, and police powers. In this milieu, the growth of federal powers has

  5. Urban form and energy use for transport. A Nordic experience

    Energy Technology Data Exchange (ETDEWEB)

    Naess, P

    1995-02-10

    The main research problem addressed in this thesis is the possible influence of several urban form variables on the amount of transportation, on the modal split between different means of transport, and on energy use for transportation. This problem is elucidated through five empirical investigations covering different geographic levels in a Nordic context, from individual employees and households to commuting regions. A main feature of the study is the combination of socioeconomic and urban form variables in empirical investigations, employing techniques of multivariate analysis. The investigations of residential areas and job sites have been based on travel surveys, while the investigations where the units of analysis are towns or regions have been based on fuel sales. The socioeconomic data have been collected from official statistics and from questionnaires. It is found that urban form variables exert important influences on transportation energy use. Urban density affects energy use for transportation. A central location of residences as well as workplaces is favourable with respect to energy conservation on an intra-urban scale, but not in a wider geographical context, where decentralization into several dense, relatively self-contained local communities distributed over the region is the most energy-saving pattern of regional development. Urban form characteristics favourable for minimizing transport energy requirements also seem favourable for energy conservation in buildings. 160 refs., 39 figs., 46 tabs.

  6. Numerical Solution of Uncertain Beam Equations Using Double Parametric Form of Fuzzy Numbers

    Directory of Open Access Journals (Sweden)

    Smita Tapaswini

    2013-01-01

    Full Text Available Present paper proposes a new technique to solve uncertain beam equation using double parametric form of fuzzy numbers. Uncertainties appearing in the initial conditions are taken in terms of triangular fuzzy number. Using the single parametric form, the fuzzy beam equation is converted first to an interval-based fuzzy differential equation. Next, this differential equation is transformed to crisp form by applying double parametric form of fuzzy number. Finally, the same is solved by homotopy perturbation method (HPM to obtain the uncertain responses subject to unit step and impulse loads. Obtained results are depicted in terms of plots to show the efficiency and powerfulness of the methodology.

  7. UNITED KINGDOM: under pressure

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    While attempting bravely to sustain the legacy left by J.J. Thomson, Rutherford, Chadwick, Cockcroft, Blackett, Dirac and others earlier this century, the United Kingdom, one of the major contributors to CERN, has suffered in recent years from an erosion of the international purchasing power of the pound sterling. At the same time, the national scientific community has squabbled over the apportionment of the research cake. In recent years, the CERN budget has remained constant in real terms, but the pound has drifted steadily down. In 1984 one pound bought 3.15 Swiss francs, now it gets just over 2. The hypersensitivity which left calculations at the mercy of exchange rate hiccups was cushioned in 1988 by a new method of calculating national CERN contributions, introduced by Chris Llewellyn Smith, now the Laboratory's Director General, using less sensitive input data

  8. United Kingdom national report

    International Nuclear Information System (INIS)

    Tomkins, B.

    1998-01-01

    Report of the United Kingdom deals with life extension granted to Calder Hall and Chapelcross reactors for further 10 years operation. The two well recognised life-limiting features of Magnox type reactors are graphite core ageing and materials properties of the reactor pressure circuit components. These features have been scrutinised particularly closely and the conclusion has been reached that there are no safety factors which will necessarily limit the plant life to less than 50 years. Two other life-limiting factors are hear exchanger tubes and the heat exchanger tube failures internal to boiler shells and the integrity of the main engineering structures of the plant. It was concluded that appropriate routine ageing monitoring programs are in place in respect to these features to support continuing operation beyond 40 years

  9. Mobile power plant units

    Energy Technology Data Exchange (ETDEWEB)

    Radtke, R

    1979-10-05

    Diesel engines of the MaK line 282 AK/332 with a cylinder power up to 160 kW are used, either as 6-cylinder or 8-cylinder in-line engine or as 12-cylinder V engine. Fuel consumption is between 207 and 212 g/kW. The engine is mounted on a frame, together with a generator. The fuel reserve in the tank will last for 8 hours. The lubricating system, the cooling water and starting air system, the switchboard system, and the frame are described. The switchboard plant is mounted either on a skid undercarriage or on the undercarriage. The plant can be operated independently or parallel to the network. The unit can be remote-controlled via push buttons or control knobs. A picture is presented of a mobile diesel aggregate which is in service in Libya.

  10. The United States

    International Nuclear Information System (INIS)

    Art, R.J.

    1991-01-01

    This paper reports that at least in the national security arena, the outcomes of bureaucratic infighting and domestic political struggles are not determined wholly by what goes on with the state. Rather struggles among contending groups are greatly affected by what is perceived to be happening outside the nation. Because external conditions give greater potency to some domestic forces over other, the external environment is never neutral in its domestic impact. The decisions of the period 1950-53 discussed above illustrate the point. But so too do the decisions of 1947, 1960-61 and 1969-72. In the 1947 case, Soviet intransigence provoked US nuclear rearmament. In the 1960-61 case, extended deterrent considerations pushed the United States to preserve its again newly discovered nuclear superiority. In the 1969-72 case, a Soviet determination to remain equal forced US acceptance of nuclear equality. And perhaps the best evidence of all, the perpetuation of parity ended the US inclination to resort to nuclear brinkmanship. In each instance, concerns about relative position heavily affected nuclear choice. Finally, the events of the past three years testify to the effects of international events on domestic choice. Under the terms of the 1987 INF Treaty, the two superpowers decided to dismantle and destroy an entire class of missiles of intermediate range (500-3000 kilometers) that both had deployed in Europe in the 1970s and 1980s, and in their June 1990 joint statement on strategic nuclear weapons, President Gorbachev and Brush agreed to cut the number of Soviet and US long range nuclear forces by 30 per cent. This agreement marks a watershed in US-Soviet strategic arm negotiations because for the first time the United States and the Soviet Union agreed in principals to reduce the number of weapons aimed at one another. Between 1985 and 1990 the cold war was brought to a close

  11. SI units in radiation protection

    International Nuclear Information System (INIS)

    Herrmann, D.

    1976-10-01

    In the field of radiation protection all hitherto used units for activity, activity concentrations, exposure, absorbed dose, and dose rates have to be replaced by SI units during the next years. For this purpose graphs and conversion tables are given as well as recommendations on unit combinations preferentially to be used. As to the dose equivalent, it is suggested to introduce a new special unit being 100 times greater than the rem, instead of maintaining the rem or using the gray for both absorbed dose and dose equivalent. Measures and time schedule relating to the gradual transition to SI units in measuring techniques, training, and publishing et cetera are explained. (author)

  12. Unified electronic unit for miniature radioactivity logging equipment

    International Nuclear Information System (INIS)

    Bragin, A.A.; Goldshtejn, L.M.; Fedorov, R.F.; Shikhman, A.S.

    1981-01-01

    Appropriateness and urgency of the unification of components of radioactivity logging equipment used for the investigation of wells at solid mineral deposits is substantiated. A two-channel electronic unit for miniature equipment for radioactivity logging is described and its basic specifications and performance are given. All functional assemblies of the unit are structurally made in the form of printed circuit boards placed in a pan-shaped chassis 28 mm in diameter. The unit's general design provides for the possibility to attach two probes with detection devices to the unit. The unit is used in the two-channel radioactivity logging instrument ''Kura-2'' and in the two-channel radiometer ''RUR-2''. The outer diameter of these instruments is 48 mm and they ensure the investigation of ore and coal wells with a combination radioactivity methods [ru

  13. SI units in radiation protection

    International Nuclear Information System (INIS)

    Jain, V.K.; Soman, S.D.

    1978-01-01

    International System of Units abbreviated as SI units has been adopted by most of the countries of the world. Following this development, the implementation of SI units has become mandatory with a transition period of about ten years. Some of the journals have already adopted the SI units and any material sent for publication to them must use only these. International Commission on Radiation Units and Measurement (ICRU) published letters in several journals including Physics in Medicine and Biology, Health Physics, British Journal of Radiology, etc. outlining the latest recommendations on SI units to elicit the reactions of scientists in the general field of radiological sciences. Reactions to the letters were numerous as can be seen in the correspondence columns of these journals for the last few years and ranged from great misgivings and apprehension to support and appreciation. SI units have also been the subject of editorial comments in several journals. On the basis of a survey of this literature, it may be said that there was general agreement on the long term advantage of SI units inspite of some practical difficulties in their use particularly in the initial stages. This report presents a review of SI units in radiological sciences with a view to familiarize the users with the new units in terms of the old. A time table for the gradual changeover to the SI units is also outlined. (auth.)

  14. SI units in biomedical dosimetry

    International Nuclear Information System (INIS)

    Liden, K.

    1975-01-01

    The International commission on radiation units and measurements (ICRU), during the period from 1953 to 1962 presented its definitions of the quantities absorbed dose, exposure, activity, and dose equivalent and the corresponding special units the rad, the roentgen, the curie, and the rem. At the same time an international practical system of units was developed, Le Systeme International d'Unites (SI). It was adopted by the 11th Conference Generale des Poids et Mesures (CGPM) in 1960 and is now officially introduced in almost all countries. The general implementation of the SI means difficulties for the future use of the special radiation units, because the numerical factors involved prevent their adoption as SI units. In view of this, and after having sampled the opinion in the radiological field, the ICRU prepared a Statement on Units in July, 1974 which was forwarded to the Comite International des Poids et Mesures (CIPM) and its Comite Consultatif des Unites (CCU) for consideration. As a result of this statement the CIPM has now proposed, that the 15rh CGPM adopt special names for two SI units, namely the becquerel, symbol Bq, for the unit of activity of radionuclides equal to the reciprocal second, s 1- , and the gray, symbol Gy, for the unit of absorbed dose equal to the joule per kilogram, J/kg. The 15th CGPM will consider this matter in May, 1975. (author)

  15. INFLUENCE OF CHEMICAL COMPOUNDS ON THE FORMING OF ELECTRIC ARC

    Directory of Open Access Journals (Sweden)

    I. O. Vakulenko

    2014-07-01

    Full Text Available Purpose. The purpose of work is a comparative analysis of chemical compounds influence on the process of electric arc forming and condition of its burning. Methodology. Material for an electrode was a wire 3 mm in diameter of low carbon steel with contain of carbon 0.15%. As chemical compounds, which determine the terms of forming of arc welding were used kaolin; CaCO3 with the admixtures of gypsum to 60%; SiO2 and Fe – Si with the iron concentration to 50%. Researches were conducted at the use of direct electric current and the arc of reverse polarity. As a source of electric current the welding transformer of type PSO-500 was used. On the special stand an initial gap between the electrode and metal-plate was equal to 1–1.5 mm. The interelectrode interval was filled with the probed chemical compounds and it was formed an electric arc. In the moment of electric arc arise the values of electric current and the arc voltage were determined. After the natural break of electric arc, the final size of the gap between electrodes was accepted as the maximal value of the arc lengths. Findings. In the conditions of experiment the metal transfer in interelectrode interval corresponded to the drop mechanism. According to external characteristics the ratio between the maximal arc length and the power of electric discharge has the appearance of exponential dependence. Specific power of electric arc characterizes environment of interelectrode interval in the moment of arc forming per unit of its length. Originality. 1. On the basis of influence analysis of the studied chemical compounds on the formation processes of electric arc inversely proportional relationship between the power of the electric current and the maximum arc length to the moment of its natural break is defined. 2. The ratio between the maximal arc length and the power of electric current with sufficiently high correlation coefficient is subjected to the exponential dependence. Influence of

  16. 2-Ethoxy-4-(4-methylphenyl-6-phenylpyridine-3-carbonitrile

    Directory of Open Access Journals (Sweden)

    Shaaban K. Mohamed

    2012-08-01

    Full Text Available The title compound, C21H18N2O, crystallized with two independent molecules (A and B in the asymmetric unit. In molecule A, the central pyridine ring forms dihedral angles of 14.55 (13 and 39.14 (12° with the terminal phenyl and benzene rings, respectively. The latter rings make a dihedral angle of 33.06 (13° with each other. The corresponding values for molecule B are 26.86 (13, 41.82 (12 and 38.99 (13°, respectively. In the crystal, the B molecules are linked via a pair of weak C—H...N hydrogen bonds, forming inversion dimers. In addition, C—H...π interactions and π–π [centroid–centroid distances = 3.5056 (16 and 3.8569 (17 Å] stacking interactions are observed.

  17. Ethyl 2-(1,2,3,4-tetrahydro­spiro­[carba­zole-3,2′-[1,3]dioxolan]-9-yl)acetate

    Science.gov (United States)

    Löffler, Philipp M. G.; Ulven, Trond; Bond, Andrew D.

    2009-01-01

    In the title compound, C18H21NO4, the hydrogenated six-membered ring of the carbazole unit adopts a half-chair conformation. The dioxolane ring and ethyl­acetate substituent point to opposite sides of the carbazole plane. The ethyl­acetate substituent adopts an essentially fully extended conformation, and its mean plane forms a dihedral angle of 83.8 (1)° with respect to the carbazole mean plane. The mol­ecules are arranged into stacks in which the carbazole planes form a dihedral angle of 4.4 (1)° and have an approximate inter­planar separation of 3.6 Å. PMID:21582427

  18. 1,3,5-Tri-p-tolylpentane-1,5-diol

    Directory of Open Access Journals (Sweden)

    A. Thiruvalluvar

    2014-02-01

    Full Text Available In the title compound, C26H30O2, the central benzene ring forms dihedral angles of 14.85 (15 and 28.17 (14° with the terminal benzene rings. The dihedral angle between the terminal benzene rings is 32.14 (13°. The crystal packing exhibits two strong intermolecular O—H...O hydrogen bonds, forming directed four-membered co-operative rings. A region of disordered electron density, most probably disordered ethyl acetate solvent molecules, occupying voids of ca 519 Å3 for an electron count of 59, was treated using the SQUEEZE routine in PLATON [Spek (2009. Acta Cryst. D65, 148–155]. Their formula mass and unit-cell characteristics were not taken into account during refinement. The structure was refined as an inversion twin [absolute structure parameter = −0.3 (4].

  19. Disjoint sum forms in reliability theory

    Directory of Open Access Journals (Sweden)

    B. Anrig

    2014-01-01

    Full Text Available The structure function f of a binary monotone system is assumed to be known and given in a disjunctive normal form, i.e. as the logical union of products of the indicator variables of the states of its subsystems. Based on this representation of f, an improved Abraham algorithm is proposed for generating the disjoint sum form of f. This form is the base for subsequent numerical reliability calculations. The approach is generalized to multivalued systems. Examples are discussed.

  20. Codimension two Kaehler submanifolds of space forms

    International Nuclear Information System (INIS)

    Ferreira, M.J.; Tribuzy, R.

    2001-03-01

    In this article we study isometric immersions from Kaehler manifolds whose (1,1) part of the second fundamental form is parallel, the ppmc isometric immersions. When the domain is a Riemann surface these immersions are precisely those with parallel mean curvature. P. J. Ryan has classified the Kaehler manifolds that admit isometric immersions, as real hypersurfaces, in space forms. We classify the codimension two ppmc isometric immersions into space forms. (author)

  1. Forming Behaviour in Laser Shock Drawing

    OpenAIRE

    Schulze Niehoff, H.; Vollertsen, F.; Wielage, H.

    2008-01-01

    Through the continuing trend of miniaturization new cost efficient and fast methods for processing small parts are required. In this paper a new non-mechanical process for the forming process of micro deep drawing is presented. This new deep drawing process utilizes a laser initiated plasma shock wave at the target, which forms the sheet. Several pulses can be applied at one point and therefore high forming degrees can be reached without increasing the energy density. In this paper the pressu...

  2. Normal form theory and spectral sequences

    OpenAIRE

    Sanders, Jan A.

    2003-01-01

    The concept of unique normal form is formulated in terms of a spectral sequence. As an illustration of this technique some results of Baider and Churchill concerning the normal form of the anharmonic oscillator are reproduced. The aim of this paper is to show that spectral sequences give us a natural framework in which to formulate normal form theory. © 2003 Elsevier Science (USA). All rights reserved.

  3. On form factors of boundary changing operators

    Energy Technology Data Exchange (ETDEWEB)

    Bajnok, Z., E-mail: bajnok.zoltan@wigner.mta.hu [MTA Lendület Holographic QFT Group, Wigner Research Centre for Physics, P.O.B. 49, H-1525 Budapest 114 (Hungary); Hollo, L., E-mail: hollo.laszlo@wigner.mta.hu [MTA Lendület Holographic QFT Group, Wigner Research Centre for Physics, P.O.B. 49, H-1525 Budapest 114 (Hungary); Laboratoire de Physique Théorique, École Normale Supérieure, 24, rue Lhomond, 75005 Paris (France)

    2016-04-15

    We develop a form factor bootstrap program to determine the matrix elements of local, boundary condition changing operators. We propose axioms for these form factors and determine their solutions in the free boson and Lee–Yang models. The sudden change in the boundary condition, caused by an operator insertion, can be interpreted as a local quench and the form factors provide the overlap of any state before the quench with any outgoing state after the quench.

  4. Processes for production of alternative waste forms

    International Nuclear Information System (INIS)

    Ross, W.A.; Rusin, J.M.; McElroy, J.L.

    1979-01-01

    During the past 20 years, numerous waste forms and processes have been proposed for solidification of high-level radioactive wastes (HLW). The number has increased significantly during the past 3 to 4 years. At least five factors must be considered in selecting the waste form and process method: 1) processing flexibility, 2) waste loading, 3) canister size and stability, 4) waste form inertness and stability, and 5) processing complexity. This paper describes various waste form processes and operations, and a simple system is proposed for making comparisons. This system suggests that one goal for processes would be to reduce the number of process steps, thereby providing less complex processing systems

  5. Opening science: New publication forms in science

    Directory of Open Access Journals (Sweden)

    Scheliga, Kaja

    2014-12-01

    Full Text Available [english] Digital technologies change how scientists access and process information and consequently impact publication forms in science. Even though the core of scientific publications has remained the same, established publication formats, such as the scientific paper or book, are succumbing to the transitions caused by digital technologies. At the same time, new online tools enable new publication forms, such as blogs, microblogs or wikis, to emerge. This article explores the changing and emerging publications forms in science and also reflects upon the changing role of libraries. The transformations of publishing forms are discussed in the context of open science.

  6. Review on Cold-Formed Steel Connections

    Science.gov (United States)

    Tan, Cher Siang; Mohammad, Shahrin; Md Tahir, Mahmood; Shek, Poi Ngian

    2014-01-01

    The concept of cold-formed light steel framing construction has been widespread after understanding its structural characteristics with massive research works over the years. Connection serves as one of the important elements for light steel framing in order to achieve its structural stability. Compared to hot-rolled steel sections, cold-formed steel connections perform dissimilarity due to the thin-walled behaviour. This paper aims to review current researches on cold-formed steel connections, particularly for screw connections, storage rack connections, welded connections, and bolted connections. The performance of these connections in the design of cold-formed steel structures is discussed. PMID:24688448

  7. ANALISIS TINGKAT KEMATANGAN (MATURITY LEVELS UNIT LAYANAN PENGADAAN KABUPATEN BADUNG

    Directory of Open Access Journals (Sweden)

    I Gde Uma Darmapramita

    2015-07-01

    Full Text Available The implementation of government procurement of goods and service is governed by presidential regulation number 70 year of 2012.  According to that, in Badung Regency implemented centralized in Procurement Service Unit of Badung Regency. As the one of Indonesia procurement unit pilot, Procurement Service Unit of Badung Regency has given the opportunity to perform a self assessment of its  maturity levels as government unit. The objective of this research is to find factors that influence Procuremet Service Unit of Badung Regency maturity levels, and also to find out in what level is Procurement Service Unit of Badung Regency stand. Data collection for this research have done by  using questionnaire that involve 50 respondents who understand very well about the duties and function of Procurement Service Unit of Badung Regency to perform a government procurement of good and services. The data analysis have been performed by use of factor analysis and supported by SPSS program. The result shows there are 3 factors that influent the Procurement Service Unit of Badung Regency maturity levels, which are : the synergy and organization culture, resources and risk management and organization’s performance development.  Whereas the maturity levels of Procurement Service Unit of Badung Regency is stand at compliance. Based to the factors that formed, the highly commitment and strong leadership of Badung Regency leader are very decisive to push ahead the enhancement  and  the development of Procurement Service Unit of Badung Regency.  First thing can be done is to establish an independent Procurement Service Unit therewith its Procurement Unit Development road maps that can be tiered and sustainable plan, monitor and evaluate

  8. [United theory of aging].

    Science.gov (United States)

    Trubitsyn, A G

    2012-01-01

    In attempts to develop a means of life prolongation the humankind has created more than three hundred theories of the aging; each of them offers the original cause of aging. However, none of them has given practical result by now. The majority of the theories have now only historical interest. There are several different theories that are mainly under consideration currently. They are based on reliable, proven evidence: the free radical theory, the protein error theory, the replicative senescence theory, the theory of reparation weakening, the immunological theory, several versions of neuroendocrinal theories, and programmed aging theory. The theory presented here is based on conception that the life as the phenomenon represents many of the interconnected physical and chemical processes propelled by energy of the mitochondrial bioenergetical machine. Gradual degradation of all vital processes is caused by the programmed decrease in level of bioenergetics. This theory unites all existing theories of aging constructed on authentic facts: it is shown, that such fundamental phenomena accompanying aging process as the increase in level of reactive oxygen species (ROS), the decrease in the general level of protein synthesis, the limitation of cellular dividing (Haiflick limit), decrease in efficiency of reparation mechanisms are caused by bioenergetics attenuation. Each of these phenomena in turn generates a number of harmful secondary processes. Any of the theories bases on one of these destructive phenomena or their combination. Hence, each of them describes one of sides of process of the aging initially caused by programmed decrease of level of bioenergetics. This united theory gives the chance to understand the nature of aging clock and explains a phenomenon of increase in longevity at the condition of food restriction. Failures of attempts to develop means from aging are explained by that the manipulations with the separate secondary phenomena of attenuation of

  9. United Kingdom position paper

    International Nuclear Information System (INIS)

    1983-01-01

    In any system employing liquid sodium as a coolant, large heat transfer coefficients exist between the metal structure containing the coolant, and the coolant itself. Any rapidly varying temperatures, either space wise or time wise, in the sodium are readily transmitted to the surrounding metal structure, resulting in the generation of appreciable thermal stresses within these structures. In particular, the phenomenon of thermal stratification in the sodium coolant has the potential to induce unacceptable thermal stresses throughout the system. With respect to the present U.K. fast reactor design, a large programme of work in connection with the thermal hydraulic aspects of the plant is in hand. This programme is being undertaken as a joint effort by the National Nuclear Corporation, the United Kingdom Atomic Energy Authority, and the Central Electricity Generating Board. Work is in progress both to identify the areas of the system that will be susceptible to, and to ensure that the design is capable of successfully withstanding any thermal stratification effects. The production of stratification phenomena depends both upon the design and the operation of the reactor system. These are briefly described below. Areas where thermal stratification effects exist are then identified and the programme of work associated with each area is outlined

  10. Intensive Care Unit Delirium

    Directory of Open Access Journals (Sweden)

    Yongsuk Kim

    2015-05-01

    Full Text Available Delirium is described as a manifestation of acute brain injury and recognized as one of the most common complications in intensive care unit (ICU patients. Although the causes of delirium vary widely among patients, delirium increases the risk of longer ICU and hospital length of stay, death, cost of care, and post-ICU cognitive impairment. Prevention and early detection are therefore crucial. However, the clinical approach toward delirium is not sufficiently aggressive, despite the condition’s high incidence and prevalence in the ICU setting. While the underlying pathophysiology of delirium is not fully understood, many risk factors have been suggested. As a way to improve delirium-related clinical outcome, high-risk patients can be identified. A valid and reliable bedside screening tool is also needed to detect the symptoms of delirium early. Delirium is commonly treated with medications, and haloperidol and atypical antipsychotics are commonly used as standard treatment options for ICU patients although their efficacy and safety have not been established. The approaches for the treatment of delirium should focus on identifying the underlying causes and reducing modifiable risk factors to promote early mobilization.

  11. Mobile contingency unit

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Sergio O. da; Magalhaes, Milton P. de [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil); Junqueira, Rodrigo A.; Torres, Carlos A.R. [PETROBRAS Transporte S/A (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    This paper is aimed at presenting what is already a reality in TRANSPETRO in the area covered by OSBRA, a pipeline that carries by-products to the Mid-West region of Brazil. In order to meet the needs of covering occasional accidents, TRANSPETRO counts on a standardized system of emergency management. It is a great challenge to secure an efficient communication along the 964 km of extension, considering that there are shadow zones where it is not possible to use conventional means of communication such as mobile telephony and internet. It was in this context that the Mobile Contingency Unit Via Satellite - MCU was developed, to extend the communication facilities existing in fixed installations to remote places, mainly the pipeline right of ways. In case of emergency, simulation and work in the pipeline right of way, MCU is fully able to provide the same data, voice, closed-circuit TV and satellite video conference facilities that are available in any internal area of the PETROBRAS system. (author)

  12. The United Kingdom

    International Nuclear Information System (INIS)

    Croft, S.; Williams, P.

    1991-01-01

    The possession of nuclear weapons by the United Kingdom has long been a controversial issue in British politics, and among historians and strategists. Part of the controversy has revolved around questions of motivation. Why did the British Government under Prime Minister Clement Attlee develop nuclear weapons? Why have successive British governments maintained and, in fact, modernized the national nuclear force? This paper reports that a frequent response to these questions is to place the issue of the acquisition of nuclear weapons by the UK into a post-colonial context. In the nineteenth and early twentieth centuries, Britain was a great power with global assets and commitments. After the Empire was reduced in size and importance, however, and eventually swept away, Britain could not longer claim to be a superpower in any modern sense. Nevertheless, it is suggested, British policy makers had developed a foreign policy based upon certain assumptions about Britain's position and power and they were reluctant to relinquish these assumptions. Furthermore, it is contended, the decision to develop nuclear weapons was taken to reinforce what were the pretensions of a medium power, and the continued obsession of successive British governments with nuclear weapons provides evidence that Britain has still not come to terms with its reduced role and limited influence. In short, the British infatuation with nuclear weapons over the past 40 years is best explained in terms of concerns about status

  13. Hanford Site Waste management units report

    International Nuclear Information System (INIS)

    1992-01-01

    This report summarizes the operable units in several areas of the Hanford Site Waste Facility. Each operable unit has several waste units (crib, ditch, pond, etc.). The operable units are summarized by describing each was unit. Some of the descriptions are unit name, unit type, waste category start data, site description, etc. The descriptions will vary for each waste unit in each operable unit and area of the Hanford Site

  14. Liquid secondary waste: Waste form formulation and qualification

    Energy Technology Data Exchange (ETDEWEB)

    Cozzi, A. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Dixon, K. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hill, K. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Nichols, R. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-07-31

    and water characteristic curves) were comparable to the properties measured on the Savannah River Site (SRS) Saltstone waste form. Future testing should include efforts to first; 1) determine the rate and amount of ammonia released during each unit operation of the treatment process to determine if additional ammonia management is required, then; 2) reduce the ammonia content of the ETF concentrated brine prior to solidification, making the waste more amenable to grouting, or 3) manage the release of ammonia during production and ongoing release during storage of the waste form, or 4) develop a lower pH process/waste form thereby precluding ammonia release.

  15. Ceramic waste forms for fuel-containing masses at Chernobyl

    International Nuclear Information System (INIS)

    Oversby, V.M.

    1994-05-01

    The fuel materials originally in the core of the Chernobyl Unit 4 reactor are now present within the Ukrytie in three major forms: (1) very fine particles of fuel dispersed as dust (about 10 tonnes), (2) fragments of the destroyed core, and (3) lavas containing fuel, cladding, and other materials. All of these materials will need to be immobilized into waste forms suitable for final disposal. We propose a ceramic waste form system that could accommodate all three waste types with a single set of processing equipment. The waste form would include the mineral zirconolite for immobilization of actinide materials (including uranium), perovskite, nepheline, spinel, and other phases as dictated by the chemistry of the lava masses. Waste loadings as high as 50% U can be achieved if pyrochlore, a close relative of zirconolite, is used as the U host. The ceramic immobilization could be achieved with low additions of inert chemicals to minimize the final disposal volume while ensuring a durable product. The sequence of processing would be to collect and immobilize the fuel dust first. This material will require minimal preprocessing and will provide experience in the handling of the fuel materials. Core fragments would be processed next, using a cryogenic crushing stage to reduce the size prior to adding ceramic additives. The lavas would be processed last, which is compatible with the likely sequence of availability of materials and with the complexity of the operations. The lavas will require more adjustment of chemical additive composition than the other streams to ensure that the desired phases are produced in the waste form

  16. Form Filling with Self-Compacting Concrete

    DEFF Research Database (Denmark)

    Thrane, Lars Nyholm

    2002-01-01

    This paper describes a newly started Ph.D. project with the aim of simulating the form filling ability of Self-Compacting Concrete (SCC) taking into account the form geometry, reinforcement configuration, casting technique, and the rheological properties of the concrete. Comparative studies...

  17. Multiscale friction modeling for sheet metal forming

    NARCIS (Netherlands)

    Hol, J.; Cid Alfaro, M.V.; de Rooij, Matthias B.; Meinders, Vincent T.; Felder, Eric; Montmitonnet, Pierre

    2010-01-01

    The most often used friction model for sheet metal forming simulations is the relative simple Coulomb friction model. This paper presents a more advanced friction model for large scale forming simulations based on the surface change on the micro-scale. The surface texture of a material changes when

  18. New organizational forms, controls, and institutions

    NARCIS (Netherlands)

    Annosi, Maria Carmela; Brunetta, Federica

    2017-01-01

    This book highlights the growing number of 'post-bureaucratic' firms that are abandoning hierarchical organizational forms in favor of self-managing teams. Addressing the need to outperform, these new organization types foresee the benefits of an organic structure with new and more indirect forms of

  19. Subclinical form of the American visceral leishmaniasis

    Directory of Open Access Journals (Sweden)

    Mônica Elinor Alves Gama

    2004-12-01

    Full Text Available The subclinical form of visceral leishmaniasis (VL shows nonspecific clinical manifestations, with difficulties being frequently met in its clinical characterization and diagnostic confirmation. Thus, the objective of the present study was to define the clinical-laboratory profile of this clinical form. A cohort study was conducted in the state of Maranhão, Brazil, from January/1998 to December/2000, with monthly follow-up of 784 children aged 0-5 years. Based on the clinical-laboratory parameters reported in the literature, four categories were established, with the children being classified (according to their clinical-evolutive behavior as asymptomatic (N = 144, as having the subclinical form (N = 33 or the acute form (N = 12 or as subjects "without VL" (N = 595. Multiple discriminant analysis demonstrated that the combination of fever, hepatomegaly, hyperglobulinemia, and increased blood sedimentation rate (BSR can predict the subclinical form of VL as long as it is not associated with splenomegaly or leukopenia. Subjects with the subclinical form did not show prolonged or intermittent evolution or progression to the acute form of VL. Subclinical cases have a profile differing from the remaining clinical forms of VL, being best characterized by the combination of fever, hepatomegaly, hyperglobulinemia, and increased BSR.

  20. Major and minor form of hereditary hyperekplexia

    NARCIS (Netherlands)

    Tijssen, MAJ; Vergouwe, MN; van Dijk, JG; Rees, M; Frants, RR; Brown, P

    Hyperekplexia is a hereditary neurological disorder characterized by excessive startle responses. Within the disorder two clinical forms can be distinguished. The major form is characterized by continuous generalized stiffness in the first year of life and an exaggerated startle reflex, accompanied