WorldWideScience

Sample records for unit emu advanced

  1. Management of the Post-Shuttle Extravehicular Mobility Unit (EMU) Water Circuits

    Science.gov (United States)

    Steele, John W.; Etter, David; Rector, Tony; Hill, Terry; Wells, Kevin

    2012-01-01

    The EMU incorporates two separate water circuits for the rejection of metabolic heat from the astronaut and the cooling of electrical components. The first (the Transport Water Loop) circulates in a semi-closed-loop manner and absorbs heat into a Liquid Coolant and Ventilation Garment (LCVG) worn by the astronaut. The second (the Feed-water Loop) provides water to a cooling device (Sublimator) with a porous plate, and that water subsequently sublimates to space vacuum. The cooling effect from the sublimation of this water translates to a cooling of the LCVG water that circulates through the Sublimator. Efforts are underway to streamline the use of a water processing kit (ALCLR) that is being used to periodically clean and disinfect the Transport Loop Water. Those efforts include a fine tuning of the duty cycle based on a review of prior performance data as well as an assessment of a fixed installation of this kit into the EMU backpack, within on-orbit EMU interface hardware or as a stand-alone unit. Furthermore, testing is being conducted to ensure compatibility between the International Space Station (ISS) Water Processor Assembly (WPA) effluent and the EMU Sublimator as a prelude to using the WPA effluent as influent to the EMU Feed Water loop. This work is undertaken to reduce the crewtime and logistics burdens for the EMU, while ensuring the long-term health of the EMU water circuits for a 6-year service life.

  2. Maintaining Adequate CO2 Washout for an Advanced EMU via a New Rapid Cycle Amine Technology

    Science.gov (United States)

    Chullen, Cinda; Conger, Bruce

    2012-01-01

    Over the past several years, NASA has realized tremendous progress in Extravehicular Activity (EVA) technology development. This has been evidenced by the progressive development of a new Rapid Cycle Amine (RCA) system for the Advanced Extravehicular Mobility Unit (AEMU) Portable Life Support Subsystem (PLSS). The PLSS is responsible for the life support of the crew member in the spacesuit. The RCA technology is responsible for carbon dioxide (CO2) and humidity control. Another aspect of the RCA is that it is on-back vacuum-regenerable, efficient, and reliable. The RCA also simplifies the PLSS schematic by eliminating the need for a condensing heat exchanger for humidity control in the current EMU. As development progresses on the RCA, it is important that the sizing be optimized so that the demand on the PLSS battery is minimized. As well, maintaining the CO2 washout at adequate levels during an EVA is an absolute requirement of the RCA and associated ventilation system. Testing has been underway in-house at NASA Johnson Space Center and analysis has been initiated to evaluate whether the technology provides exemplary performance in ensuring that the CO2 is removed sufficiently and the ventilation flow is adequate for maintaining CO2 washout in the AEMU spacesuit helmet of the crew member during an EVA. This paper will review the recent developments of the RCA unit, testing planned in-house with a spacesuit simulator, and the associated analytical work along with insights from the medical aspect on the testing. 1

  3. Comparison of Extravehicular Mobility Unit (EMU) suited and unsuited isolated joint strength measurements

    Science.gov (United States)

    Maida, James C.; Demel, Kenneth J.; Morgan, David A.; Wilmington, Robert P.; Pandya, Abhilash K.

    1996-01-01

    In this study the strength of subjects suited in extravehicular mobility units (EMU's) - or Space Shuttle suits - was compared to the strength of unsuited subjects. The authors devised a systematic and complete data set that characterizes isolated joint torques for all major joints of EMU-suited subjects. Six joint motions were included in the data set. The joint conditions of six subjects were compared to increase our understanding of the strength capabilities of suited subjects. Data were gathered on suited and unsuited subjects. Suited subjects wore Class 3 or Class 1 suits, with and without thermal micrometeoroid garments (TMG's). Suited and unsuited conditions for each joint motion were compared. From this the authors found, for example, that shoulder abduction suited conditions differ from each other and from the unsuited condition. A second-order polynomial regression model was also provided. This model, which allows the prediction of suited strength when given unsuited strength information, relates the torques of unsuited conditions to the torques of all suited conditions. Data obtained will enable computer modeling of EMU strength, conversion from unsuited to suited data, and isolated joint strength comparisons between suited and unsuited conditions at any measured angle. From these data mission planners and human factors engineers may gain a better understanding of crew posture, and mobility and strength capabilities. This study also may help suit designers optimize suit strength, and provide a foundation for EMU strength modeling systems.

  4. Elementary metabolite units (EMU): a novel framework for modeling isotopic distributions.

    Science.gov (United States)

    Antoniewicz, Maciek R; Kelleher, Joanne K; Stephanopoulos, Gregory

    2007-01-01

    Metabolic flux analysis (MFA) has emerged as a tool of great significance for metabolic engineering and mammalian physiology. An important limitation of MFA, as carried out via stable isotope labeling and GC/MS and nuclear magnetic resonance (NMR) measurements, is the large number of isotopomer or cumomer equations that need to be solved, especially when multiple isotopic tracers are used for the labeling of the system. This restriction reduces the ability of MFA to fully utilize the power of multiple isotopic tracers in elucidating the physiology of realistic situations comprising complex bioreaction networks. Here, we present a novel framework for the modeling of isotopic labeling systems that significantly reduces the number of system variables without any loss of information. The elementary metabolite unit (EMU) framework is based on a highly efficient decomposition method that identifies the minimum amount of information needed to simulate isotopic labeling within a reaction network using the knowledge of atomic transitions occurring in the network reactions. The functional units generated by the decomposition algorithm, called EMUs, form the new basis for generating system equations that describe the relationship between fluxes and stable isotope measurements. Isotopomer abundances simulated using the EMU framework are identical to those obtained using the isotopomer and cumomer methods, however, require significantly less computation time. For a typical (13)C-labeling system the total number of equations that needs to be solved is reduced by one order-of-magnitude (100s EMUs vs. 1000s isotopomers). As such, the EMU framework is most efficient for the analysis of labeling by multiple isotopic tracers. For example, analysis of the gluconeogenesis pathway with (2)H, (13)C, and (18)O tracers requires only 354 EMUs, compared to more than two million isotopomers.

  5. Management of the Post-Shuttle Extravehicular Mobility Unit (EMU) Water Circuits

    Science.gov (United States)

    Steele, John W.; Etter, David; Rector, Tony; Hill, Terry; Wells, Kevin

    2011-01-01

    The EMU incorporates two separate water circuits for the rejection of metabolic heat from the astronaut and the cooling of electrical components. The first (the Transport Water Loop) circulates in a semi-closed-loop manner and absorbs heat into a Liquid Coolant and Ventilation Garment (LCVG) warn by the astronaut. The second (the Feed Water Loop) provides water to a cooling device (Sublimator) with a porous plate, and that water subsequently sublimates to space vacuum. The cooling effect from the sublimation of this water translates to a cooling of the LCVG water that circulates through the Sublimator. Efforts are underway to streamline the use of a water processing kit (ALCLR) that is being used to periodically clean and disinfect the Transport Loop Water. Those efforts include a fine tuning of the duty cycle based on a review of prior performance data as well as an assessment of a fixed installation of this kit into the EMU backpack or within on-orbit EMU interface hardware. Furthermore, testing is being conducted to ensure compatibility between the International Space Station (ISS) Water Processor Assembly (WPA) effluent and the EMU Sublimator as a prelude to using the WPA effluent as influent to the EMU Feed Water loop. This work is undertaken to reduce the crew-time and logistics burdens for the EMU, while ensuring the long-term health of the EMU water circuits for a post-Shuttle 6-year service life.

  6. Hypervelocity Impacts on ISS Handrails and Evaluation of Alternative Materials to Prevent Extravehicular Mobility Unit (EMU) Glove Damage During EVA

    Science.gov (United States)

    Ryan, Shannon; Christiansen, Eruc; Davis, B. Alan; Ordonez, Erick

    2009-01-01

    During post-flight processing of STS-116, damage to crewmember Robert Curbeam's Phase VI Glove Thermal Micrometeoroid Garment was discovered. This damage consisted of: loss of RTV-157 palm pads on the thumb area on the right glove, a 0.75 inch cut in the Vectran adjacent to the seam and thumb pad (single event cut), constituting the worst glove damage ever recorded for the U.S. space program. The underlying bladder and restraint were found not be damaged by this event. Evaluation of glove damage found that the outer Vectran fibers were sliced as a result of contact with a sharp edge or pinch point rather than general wear or abrasion (commonly observed on the RTV pads). Damage to gloves was also noted on STS-118 and STS-120. One potential source of EMU glove damages are sharp crater lips on external handrails, generated by micrometeoroid and orbital debris (MMOD) impacts. In this paper, the results of a hypervelocity impact (HVI) test program on representative and actual ISS handrails are presented. These tests were performed in order to characterize impact damage profiles on ISS handrails and evaluate alternatives for limiting risk to future missions. It was determined that both penetrating and non-penetrating MMOD impacts on aluminum and steel ISS handrails are capable of generating protruding crater profiles which exceed the heights required for EMU glove abrasion risk by an order of magnitude. Testing demonstrated that flexible overwraps attached to the outside of existing handrails are capable of limiting contact between hazardous crater formations and crewmember gloves during extravehicular activity (EVA). Additionally, replacing metallic handrails with high strength, low ductility, fiber reinforced composite materials would limit the formation of protruding crater lips on new ISS modules.

  7. Injury Risk Assessment of Extravehicular Mobility Unit (EMU) Phase VI and Series 4000 Gloves During Extravehicular Activity (EVA) Hand Manipulation Tasks

    Science.gov (United States)

    Kilby, Melissa

    2015-01-01

    Functional Extravehicular Mobility Units (EMUs) with high precision gloves are essential for the success of Extravehicular Activity (EVA). Previous research done at NASA has shown that total strength capabilities and performance are reduced when wearing a pressurized EMU. The goal of this project was to characterize the human-space suit glove interaction and assess the risk of injury during common EVA hand manipulation tasks, including pushing, pinching and gripping objects. A custom third generation sensor garment was designed to incorporate a combination of sensors, including force sensitive resistors, strain gauge sensors, and shear force sensors. The combination of sensors was used to measure the forces acting on the finger nails, finger pads, finger tips, as well as the knuckle joints. In addition to measuring the forces, data was collected on the temperature, humidity, skin conductance, and blood perfusion of the hands. Testing compared both the Phase VI and Series 4000 glove against an ungloved condition. The ungloved test was performed wearing the sensor garment only. The project outcomes identified critical landmarks that experienced higher workloads and are more likely to suffer injuries. These critical landmarks varied as a function of space suit glove and task performed. The results showed that less forces were acting on the hands while wearing the Phase VI glove as compared to wearing the Series 4000 glove. Based on our findings, the engineering division can utilize these methods for optimizing the current space suit glove and designing next generation gloves to prevent injuries and optimize hand mobility and comfort.

  8. Antenna Design Considerations for the Advanced Extravehicular Mobility Unit

    Science.gov (United States)

    Bakula, Casey J.; Theofylaktos, Onoufrios

    2015-01-01

    NASA is designing an Advanced Extravehicular Mobility Unit (AEMU)to support future manned missions beyond low-Earth orbit (LEO). A key component of the AEMU is the communications assembly that allows for the wireless transfer of voice, video, and suit telemetry. The Extravehicular Mobility Unit (EMU) currently used on the International Space Station (ISS) contains a radio system with a single omni-directional resonant cavity antenna operating slightly above 400 MHz capable of transmitting and receiving data at a rate of about 125 kbps. Recent wireless communications architectures are calling for the inclusion of commercial wireless standards such as 802.11 that operate in higher frequency bands at much higher data rates. The current AEMU radio design supports a 400 MHz band for low-rate mission-critical data and a high-rate band based on commercial wireless local area network (WLAN) technology to support video, communication with non-extravehicular activity (EVA) assets such as wireless sensors and robotic assistants, and a redundant path for mission-critical EVA data. This paper recommends the replacement of the existing EMU antenna with a new antenna that maintains the performance characteristics of the current antenna but with lower weight and volume footprints. NASA has funded several firms to develop such an antenna over the past few years, and the most promising designs are variations on the basic patch antenna. This antenna technology at UHF is considered by the authors to be mature and ready for infusion into NASA AEMU technology development programs.

  9. Plastic toy shark drifts through airlock in front of EMU suited MS Lenoir

    Science.gov (United States)

    1982-01-01

    Plastic toy shark drifts through airlock and around fully extravehicular mobility unit (EMU) suited Mission Specialist (MS) Lenoir. Lenoir watches as shark drifts pass his left hand. Lenoir donned the EMU in preparation for a scheduled extravehicular activity (EVA) which was cancelled due to EMU problems.

  10. Development of the ISS EMU Dashboard Software

    Science.gov (United States)

    Bernard, Craig; Hill, Terry R.

    2011-01-01

    The EMU (Extra-Vehicular Mobility Unit) Dashboard was developed at NASA s Johnson Space Center to aid in real-time mission support for the ISS (International Space Station) and Shuttle EMU space suit by time synchronizing down-linked video, space suit data and audio from the mission control audio loops. Once the input streams are synchronized and recorded, the data can be replayed almost instantly and has proven invaluable in understanding in-flight hardware anomalies and playing back information conveyed by the crew to missions control and the back room support. This paper will walk through the development from an engineer s idea brought to life by an intern to real time mission support and how this tool is evolving today and its challenges to support EVAs (Extra-Vehicular Activities) and human exploration in the 21st century.

  11. Astronaut Russell Schweickart wears EMU and PLSS for countdown test

    Science.gov (United States)

    1969-01-01

    Astronaut Russell L. Schweickart, lunar module pilot of the Apollo 9 prime crew, wears the extravehicular mobility unit (EMU) which he will use during his scheduled Apollo 9 extravehicular activity. In addition to the space suit and bubble helmet, the EMU also includes a portable life support system (PLSS) back pack, an Oxygen Purge System (seen atop the PLSS), and a Remote Control Unit on his chest. When this photograph was taken, Schweickart was suited up to participate in an Apollo 9 Countdown Demonstration Test.

  12. Fiscal stabilisation in the EMU

    NARCIS (Netherlands)

    Aarle, B. van; Garretsen, J.H.

    1997-01-01

    This paper analyses the effects of macroeconomic shocks in a monetary union with the aid of a two-country model of the EMU. Our analysis serves two purposes. First, we show how asymmetries between countries might matter in terms of the resulting business cycle fluctuations. More specifically, we do

  13. STS-34 Mission Specialist (MS) Chang-Diaz dons EMU during WETF exercises

    Science.gov (United States)

    1989-01-01

    STS-34 Atlantis, Orbiter Vehicle (OV) 104, Mission Specialist (MS) Franklin R. Chang-Diaz dons extravehicular mobility unit (EMU) in preparation for an extravehicular activity (EVA) contingency exercise in JSC's Weightless Environment Training Facility (WETF) Bldg 29 pool. This closeup shows Chang-Diaz straightening his EMU sleeve.

  14. Behavior of emu bird (Dromaius novaehollandiae

    Directory of Open Access Journals (Sweden)

    V. R. Patodkar

    Full Text Available Emu is the second largest living bird of world belonging to order Ratite. This order is of flightless birds with flat breast bone and it includes emu, ostrich, rhea, cassowary and kiwi. Emus are reared commercially in many parts of the world for their meat, oil, skin and feathers, which are of high economic value. The anatomical and physiological features of these birds appear to be suitable for temperate and tropical climatic conditions. Emu is newly introduced species in India. Although emu farming is considered to be economical, we have to study the behavior of emus to increase the profitability by providing housing, feeding and breeding facilities more or less same as that of in wild condition during their rearing in captivity and we will have to carry out comparative study of behavior in captivity as well as in wild condition. [Vet World 2009; 2(11.000: 439-440

  15. The Case of “EMU-Outsiders”: Economic and Political Considerations

    Directory of Open Access Journals (Sweden)

    Lucian BELAŞCU

    2016-06-01

    Full Text Available Our paper discusses the option of three EU countries – United Kingdom, Sweden and Denmark – of not joining the EMU and analyses whether besides their subjective option of staying out of the EMU there is also an economic reason behind this decision, based on existing literature in the field. The three “EMU-outsiders” are different in terms of economic power, financial market attributes, monetary policy rules employed and political decisions. In each case, the choice to remain outside EMU was based on economic reasons, as well as political and sometimes nationalist arguments. Of the three countries under scrutiny, Denmark is by far the one which has the best prospects of joining EMU, given its fixed exchange rate against the Euro, and United Kingdom the worst, particularly given the recent vote for Brexit. At the same time, the sovereign debt crisis that the EU and particularly the EMU had to confront between 2009 and 2011 has seriously threatened the eventual adoption of the common currency by these economies.

  16. EmuStack: An OpenStack-Based DTN Network Emulation Platform (Extended Version

    Directory of Open Access Journals (Sweden)

    Haifeng Li

    2016-01-01

    Full Text Available With the advancement of computing and network virtualization technology, the networking research community shows great interest in network emulation. Compared with network simulation, network emulation can provide more relevant and comprehensive details. In this paper, EmuStack, a large-scale real-time emulation platform for Delay Tolerant Network (DTN, is proposed. EmuStack aims at empowering network emulation to become as simple as network simulation. Based on OpenStack, distributed synchronous emulation modules are developed to enable EmuStack to implement synchronous and dynamic, precise, and real-time network emulation. Meanwhile, the lightweight approach of using Docker container technology and network namespaces allows EmuStack to support a (up to hundreds of nodes large-scale topology with only several physical nodes. In addition, EmuStack integrates the Linux Traffic Control (TC tools with OpenStack for managing and emulating the virtual link characteristics which include variable bandwidth, delay, loss, jitter, reordering, and duplication. Finally, experiences with our initial implementation suggest the ability to run and debug experimental network protocol in real time. EmuStack environment would bring qualitative change in network research works.

  17. Proton Testing of Advanced Stellar Compass Digital Processing Unit

    DEFF Research Database (Denmark)

    Thuesen, Gøsta; Denver, Troelz; Jørgensen, Finn E

    1999-01-01

    The Advanced Stellar Compass Digital Processing Unit was radiation tested with 300 MeV protons at Proton Irradiation Facility (PIF), Paul Scherrer Institute, Switzerland.......The Advanced Stellar Compass Digital Processing Unit was radiation tested with 300 MeV protons at Proton Irradiation Facility (PIF), Paul Scherrer Institute, Switzerland....

  18. The Daniell cell, Ohm's law, and the emergence of the International System of Units

    Science.gov (United States)

    Jayson, Joel S.

    2014-01-01

    Telegraphy originated in the 1830s and 40 s and flourished in the following decades but with a patchwork of electrical standards. Electromotive force was for the most part measured in units of the predominant Daniell cell, but each telegraphy company had their own resistance standard. In 1862, the British Association for the Advancement of Science formed a committee to address this situation. By 1873, they had given definition to the electromagnetic system of units (emu) and defined the practical units of the ohm as 109 emu units of resistance and the volt as 108 emu units of electromotive force. These recommendations were ratified and expanded upon in a series of international congresses held between 1881 and 1904. A proposal by Giovanni Giorgi in 1901 took advantage of a coincidence between the conversion of the units of energy in the emu system (the erg) and in the practical system (the Joule). As it was, the same conversion factor existed between the cgs based emu system and a theretofore undefined MKS system. By introducing another unit X (where X could be any of the practical electrical units), Giorgi demonstrated that a self-consistent MKSX system was tenable without the need for multiplying factors. Ultimately, the ampere was selected as the fourth unit. It took nearly 60 years, but in 1960, Giorgi's proposal was incorporated as the core of the newly inaugurated International System of Units (SI). This article surveys the physics, physicists, and events that contributed to those developments.

  19. Advanced Algebra and Trigonometry: Supplemental Computer Units.

    Science.gov (United States)

    Dotseth, Karen

    A set of computer-oriented, supplemental activities is offered which can be used with a course in advanced algebra and trigonometry. The activities involve use of the BASIC programming language; it is assumed that the teacher is familiar with programming in BASIC. Students will learn some BASIC; however, the intent is not to develop proficient…

  20. Advanced prosthodontic training in the United States of America.

    Science.gov (United States)

    Hudson, James D

    2014-07-01

    This article will consider prosthodontic specialty training in the United States. The history of prosthodontics as a specialty and the requirements necessary to be considered a prosthodontist will be explored. Today, a three-year postgraduate program is necessary to be considered an educationally qualified prosthodontist. Currently, there are 46 accredited advanced specialty education programs in the United States and approximately 3200 prosthodontists. The standards and training required for completion of these programs will be considered.

  1. Advanced Beef Unit for Advanced Livestock Production Curriculum. Instructor's Guide. AGDEX 420/00.

    Science.gov (United States)

    Sparks, Jim; Stewart, Bob R.

    This instructor's guide for an advanced beef unit contains 15 lessons that build on Agricultural Science I and II competencies. Introductory materials include lists of performance objectives and competencies for the complete unit, suggestions for motivational technique/interest approach and evaluation, lists of references and materials for the…

  2. Advanced Dairy Unit for Advanced Livestock Production Curriculum. Instructor's Guide. AGDEX 410/00.

    Science.gov (United States)

    Coday, Stan; Stewart, Bob R.

    This instructor's guide contains 18 lessons for teaching advanced dairying in accordance with the Missouri State Board of Education's Vocational Instructional Management System. To make the unit easier for teachers to use, the following materials are provided in the front of the unit: objectives and competencies for each lesson, a references and…

  3. The Daniell Cell, Ohm's Law and the Emergence of the International System of Units

    CERN Document Server

    Jayson, Joel S

    2015-01-01

    Telegraphy originated in the 1830s and 40s and flourished in the following decades, but with a patchwork of electrical standards. Electromotive force was for the most part measured in units of the predominant Daniell cell. Each company had their own resistance standard. In 1862 the British Association for the Advancement of Science formed a committee to address this situation. By 1873 they had given definition to the electromagnetic system of units (emu) and defined the practical units of the ohm as ${10}^9$ emu units of resistance and the volt as ${10}^8$ emu units of electromotive force. These recommendations were ratified and expanded upon in a series of international congresses held between 1881 and 1904. A proposal by Giovanni Giorgi in 1901 took advantage of a coincidence between the conversion of the units of energy in the emu system (the erg) and in the practical system (the joule) in that the same conversion factor existed between the cgs based emu system and a theretofore undefined MKS system. By in...

  4. Unit Planning Grids for Music: Grade 9-12 Advanced.

    Science.gov (United States)

    Delaware State Dept. of Education, Dover.

    This unit planning grid outlines the expectations of Delaware high school students for advanced music studies. The grid identifies nine standards for music: (1) students will sing, independently and with others, a varied repertoire of music; (2) students will perform on instruments, independently and with others, a varied repertoire of music; (3)…

  5. A Unit on Hitler and Nazism for Advanced Students.

    Science.gov (United States)

    Williams, Elinor C.

    1993-01-01

    This unit on Hitler, the Third Reich, and its echoes in Germany today is based on original source material, such as "Mein Kampf," as well as more recent reports by those directly affected, such as Sichrovsky's "Schuldig Geboren." Teachers of advanced high school or college classes are introduced to some appropriate materials…

  6. A Unit on Hitler and Nazism for Advanced Students.

    Science.gov (United States)

    Williams, Elinor C.

    1993-01-01

    This unit on Hitler, the Third Reich, and its echoes in Germany today is based on original source material, such as "Mein Kampf," as well as more recent reports by those directly affected, such as Sichrovsky's "Schuldig Geboren." Teachers of advanced high school or college classes are introduced to some appropriate materials and offered…

  7. Capital Flows and Financial Intermediation: is EMU different?

    NARCIS (Netherlands)

    Samarina, Anna; Bezemer, Dirk

    2014-01-01

    The share of domestic bank credit allocated to non-financial business declined significantly in EMU economies since 1990. This paper examines the impact of capital inflows on domestic credit allocation, taking account of (future) EMU membership. The study utilizes a novel data set on domestic credit

  8. The ASKAP/EMU Source Finding Data Challenge

    NARCIS (Netherlands)

    Hopkins, A.M.; Whiting, M.T.; Seymour, N.; Chow, K.E.; Norris, R.P.; Bonavera, L.; Breton, R.; Carbone, D.; Ferrari, C.; Franzen, T.M.O.; Garsden, H.; González-Nuevo, J.; Hales, C.A.; Hancock, P.J.; Heald, G.; Herranz, D.; Huynh, M.; Jurek, R.J.; López-Caniego, M.; Massardi, M.; Mohan, N.; Molinari, S.; Orrù, E.; Paladino, R.; Pestalozzi, M.; Pizzo, R.; Rafferty, D.; Röttgering, H.J.A.; Rudnick, L.; Schisano, E.; Shulevski, A.; Swinbank, J.; Taylor, R.; van der Horst, A.J.

    2015-01-01

    The Evolutionary Map of the Universe (EMU) is a proposed radio continuum survey of the Southern Hemisphere up to declination + 30°, with the Australian Square Kilometre Array Pathfinder (ASKAP). EMU will use an automated source identification and measurement approach that is demonstrably optimal, to

  9. The ASKAP/EMU Source Finding Data Challenge

    NARCIS (Netherlands)

    Hopkins, A. M.; Whiting, M. T.; Seymour, N.; Chow, K. E.; Norris, R. P.; Bonavera, L.; Breton, R.; Carbone, D.; Ferrari, C.; Franzen, T. M. O.; Garsden, H.; Gonzalez-Nuevo, J.; Hales, C. A.; Hancock, P. J.; Heald, G.; Herranz, D.; Huynh, M.; Jurek, R. J.; Lopez-Caniego, M.; Massardi, M.; Mohan, N.; Molinari, S.; Orru, E.; Paladino, R.; Pestalozzi, M.; Pizzo, R.; Rafferty, D.; Rottgering, H. J. A.; Rudnick, L.; Schisano, E.; Shulevski, A.; Swinbank, J.; Taylor, R.; van der Horst, A. J.

    2015-01-01

    The Evolutionary Map of the Universe (EMU) is a proposed radio continuum survey of the Southern Hemisphere up to declination +30 deg., with the Australian Square Kilometre Array Pathfinder (ASKAP). EMU will use an automated source identification and measurement approach that is demonstrably optimal,

  10. STS-38 Mission Specialist (MS) Robert C. Springer dons EMU in JSC's WETF

    Science.gov (United States)

    1990-01-01

    STS-38 Mission Specialist (MS) Robert C. Springer, wearing extravehicular mobility unit (EMU), fastens the strap on his communications carrier assembly (CCA) cap during suit donning in JSC's Weightless Environment Training Facility (WETF) Bldg 29. Positioned on the WETF platform at pool side, Springer is preparing for an underwater extravehicular activity (EVA) simulation. During the training exercise, Springer will rehearse contingency EVA procedures for the STS-38 mission aboard Atlantis, Orbiter Vehicle (OV) 104.

  11. STS-38 Mission Specialist (MS) Robert C. Springer dons EMU in JSC's WETF

    Science.gov (United States)

    1990-01-01

    STS-38 Mission Specialist (MS) Robert C. Springer dons extravehicular mobility unit (EMU) upper torso with technicians' assistance in JSC's Weightless Environment Training Facility (WETF) Bldg 29. Positioned on the WETF platform at pool side, Springer is preparing for an underwater extravehicular activity (EVA) simulation. During the training session, Springer will rehearse contingency EVA procedures for the STS-38 mission aboard Atlantis, Orbiter Vehicle (OV) 104.

  12. Advanced Beef Unit for Advanced Livestock Production Curriculum. Selected Readings. AGDEX 420/00.

    Science.gov (United States)

    Sparks, Jim; Stewart, Bob R.

    These selected readings are designed to supplement James Gillespie's "Modern Livestock and Poultry Production" (2nd edition) as the student reference for the advanced beef unit. The 15 lessons build on Agricultural Science I and II competencies. Topics of the 15 lessons are: importance of the beef enterprise; cost of beef production;…

  13. Advanced Dairy Unit for Advanced Livestock Production Curriculum. Selected Readings. AGDEX 410/00.

    Science.gov (United States)

    Coday, Stan; Stewart, Bob R.

    These selected readings are designed to supplement James Gillespie's "Modern Livestock and Poultry Production" (2nd edition) as the the student reference for the advanced dairy unit. Readings are provided for 18 lessons. Topics include profitability of the dairy enterprise; production costs for dairy; comparative advantages of dairy; milk…

  14. Spacesuit Water Membrane Evaporator; An Enhanced Evaporative Cooling Systems for the Advanced Extravehicular Mobility Unit Portable Life Support System

    Science.gov (United States)

    Bue, Grant C.; Makinen, Janice V.; Miller, Sean.; Campbell, Colin; Lynch, Bill; Vogel, Matt; Craft, Jesse; Petty, Brian

    2014-01-01

    Spacesuit Water Membrane Evaporator - Baseline heat rejection technology for the Portable Life Support System of the Advanced EMU center dot Replaces sublimator in the current EMU center dot Contamination insensitive center dot Can work with Lithium Chloride Absorber Radiator in Spacesuit Evaporator Absorber Radiator (SEAR) to reject heat and reuse evaporated water The Spacesuit Water Membrane Evaporator (SWME) is being developed to replace the sublimator for future generation spacesuits. Water in LCVG absorbs body heat while circulating center dot Warm water pumped through SWME center dot SWME evaporates water vapor, while maintaining liquid water - Cools water center dot Cooled water is then recirculated through LCVG. center dot LCVG water lost due to evaporation (cooling) is replaced from feedwater The Independent TCV Manifold reduces design complexity and manufacturing difficulty of the SWME End Cap. center dot The offset motor for the new BPV reduces the volume profile of the SWME by laying the motor flat on the End Cap alongside the TCV.

  15. Money, prices and the transition to EMU

    Directory of Open Access Journals (Sweden)

    J.M. GROENEVELD

    1997-12-01

    Full Text Available The third stage of the Economic and Monetary Union will start on January 1st, 1999, at which point the currencies of the participating countries will be irrevocably fixed as the prelude to the introduction of the euro by 2002. Although the European System of Central Banks’ objective is clearly defined in its statute as achieving and maintaining price stability, the strategic and tactical question of how to formulate and execute the future common monetary policy is left open. This work contributes to the current discussions on this topic by investigating whether monetary aggregates can play a useful role in the monetary policy decision process in the second or third stage of the EMU. To do this the authors employ an extended open-economy version of the standard P*-model developed by Hallman, Porter and Small (1989 and 1991 to examine to what extent inflation behaviour in five founding members of the ERM can be ascribed to either domestic or European monetary conditions from 1973 to 1994.

  16. Characterization of the Advanced Stirling Radioisotope Generator Engineering Unit 2

    Science.gov (United States)

    Lewandowski, Edward J.; Oriti, Salvatore M.; Schifer, Niholas A.

    2016-01-01

    Significant progress was made developing the Advanced Stirling Radioisotope Generator (ASRG) 140-W radioisotope power system. While the ASRG flight development project has ended, the hardware that was designed and built under the project is continuing to be tested to support future Stirling-based power system development. NASA Glenn Research Center recently completed the assembly of the ASRG Engineering Unit 2 (EU2). The ASRG EU2 consists of the first pair of Sunpower's Advanced Stirling Convertor E3 (ASC-E3) Stirling convertors mounted in an aluminum housing, and Lockheed Martin's Engineering Development Unit (EDU) 4 controller (a fourth-generation controller). The ASC-E3 convertors and Generator Housing Assembly (GHA) closely match the intended ASRG Qualification Unit flight design. A series of tests were conducted to characterize the EU2, its controller, and the convertors in the flight-like GHA. The GHA contained an argon cover gas for these tests. The tests included measurement of convertor, controller, and generator performance and efficiency; quantification of control authority of the controller; disturbance force measurement with varying piston phase and piston amplitude; and measurement of the effect of spacecraft direct current (DC) bus voltage on EU2 performance. The results of these tests are discussed and summarized, providing a basic understanding of EU2 characteristics and the performance and capability of the EDU 4 controller.

  17. Economic Policy in EMU. Part A. Rules and Adjustment

    OpenAIRE

    DG ECFIN

    1997-01-01

    This paper reviews the economic debate surrounding both the opportunities and the challenges arising from European monetary union. It is organised in two parts. Part I examines the economic environment in EMU, analysing the role of markets and the macro-economic framework. It finds that the prospect of EMU has already succeeded in creating a stable macro-economic environment, but that structural reforms aimed at better functioning markets take more time to be implemented and to produce result...

  18. Advanced Transport Operating System (ATOPS) control display unit software description

    Science.gov (United States)

    Slominski, Christopher J.; Parks, Mark A.; Debure, Kelly R.; Heaphy, William J.

    1992-01-01

    The software created for the Control Display Units (CDUs), used for the Advanced Transport Operating Systems (ATOPS) project, on the Transport Systems Research Vehicle (TSRV) is described. Module descriptions are presented in a standardized format which contains module purpose, calling sequence, a detailed description, and global references. The global reference section includes subroutines, functions, and common variables referenced by a particular module. The CDUs, one for the pilot and one for the copilot, are used for flight management purposes. Operations performed with the CDU affects the aircraft's guidance, navigation, and display software.

  19. Recent Advances for LGBT Astronomers in the United States

    Science.gov (United States)

    Dixon, William V.; Rigby, Jane; Oppenheimer, Rebecca

    2015-08-01

    The legal environment for lesbian, gay, bisexual, and transgender (LGBT) astronomers in the United States has changed dramatically in recent years. In 2013, the Supreme Court ruled that Section 3 of the Defense of Marriage Act (DOMA), which had barred the federal government from recognizing same-sex marriages, was unconstitutional. This decision particularly affects astronomers, since astronomers in the U.S. are more likely than the general population to be foreign nationals, to have a foreign-born spouse, or to work for the federal government. In 2014, the Attorney General directed the Department of Justice to take the position in litigation that the protection of Title VII of the Civil Rights Act of 1964 extends to claims of discrimination based on an individual’s gender identity, including transgender status. Title VII makes it unlawful for employers to discriminate in the employment of an individual “because of such individual’s... sex,” among other protected characteristics. As of March 2015, more than 70% of the population lives in states that recognize same-sex marriage, and the Supreme Court is expected to rule on the constitutionality of the remaining same-sex marriage bans during the current term. In this poster, we discuss these advances and their implications for the personal and professional lives of LGBT astronomers across the United States.

  20. Thermal Performance Testing of EMU and CSAFE Liquid Cooling Garments

    Science.gov (United States)

    Rhodes, Richard; Bue, Grant; Hakam, Mark; Radford, Tamara

    2013-01-01

    Future exploration missions require the development of a new liquid cooling garment (LCG) that offers greater system reliability, is more comfortable, and maximizes thermal performance. To inform the development of a future LCG a thermal performance test was conducted to evaluate three factors: (1) the effect of the thermal comfort undergarment (TCU) on tactile and thermal comfort, (2) the comparable thermal performance of an CSAFE developed engineering evaluation unit (EEU) LCG, which uses a commercial-off-the-shelf (COTS) wicking garment as the base, and (3) the performance of a torso or upper body only LCG configuration to evaluate a proposed auxiliary loop configuration. To evaluate the thermal performance of each configuration a metabolic suit test was conducted, utilizing suited subjects to generate metabolic heat by walking on a treadmill at various speeds. Three (3) test subjects of similar height and weight produced a metabolic load for five tests by either resting (300-600 BTU/hr), walking at a slow pace (1200 BTU/hr), and walking at a brisk pace (2200 BTU/hr). During the test, data was collected that would allow us to track the heat transfer to the LCG and ventilation system to determine the thermal performance of the LCG configurations. Four different test configurations were tested, with one configuration tested twice. The test results show that the CSAFE EEU LCG and EMU LCG had comparable performance. The testing also showed that an auxiliary loop LCG, sized similarly to the shirt-only configuration, should provide adequate cooling for contingency scenarios. Finally, the testing showed the previous analysis that assumed a UA deterioration from the TCU was too conservative and the TCU may prove to be acceptable for future development with additional analysis and testing.

  1. Developing advanced units of learning using IMS Learning Design level B

    NARCIS (Netherlands)

    Koper, Rob; Burgos, Daniel

    2005-01-01

    Please cite the original publication: Koper, R., Burgos, D. (2005). Developing advanced units of learning using IMS Learning Design level B. International Journal on Advanced Technology for Learning, 2 (4), 252-259.

  2. The Trade and FDI Effects of EMU Enlargement

    NARCIS (Netherlands)

    R. Paap (Richard); J.M.A. Viaene (Jean-Marie); J. Brouwer (Jelle)

    2007-01-01

    textabstractThis paper considers the nature and the distribution of trade and FDI effects of a potential enlargement of the European Monetary Union (EMU) to the ten countries that obtained EU membership in 2004. Intuitively, the implementation of a single currency for these countries means replacing

  3. Output Stabilization in EMU : IS there a Case for EFTS?

    NARCIS (Netherlands)

    van Aarle, B.; Hougaard Jensen, S.E.

    1996-01-01

    Macroeconomic performance in the Economic and Monetary Union (EMU) will be impaired if macroeconomic shocks are largely asymmetric, fiscal policy flexibility is limited, goods markets adjust sluggishly, labour mobility is low and automatic stabilization from federal taxes and government spending is

  4. Fiscal Adjustments and Their Effects During the Transition to EMU

    NARCIS (Netherlands)

    Aarle, B. van; Gobbin, N.

    2001-01-01

    The transition phase to EMU has been accompanied by considerable monetary and fiscal consolidation efforts in the EU. This paper analyses this consolidation process and its effects on economic activity in the EU. It is tested to which extent the fiscal retrenchment efforts have depressed or stimulat

  5. The Trade and FDI Effects of EMU Enlargement

    NARCIS (Netherlands)

    R. Paap (Richard); J.M.A. Viaene (Jean-Marie); J. Brouwer (Jelle)

    2007-01-01

    textabstractThis paper considers the nature and the distribution of trade and FDI effects of a potential enlargement of the European Monetary Union (EMU) to the ten countries that obtained EU membership in 2004. Intuitively, the implementation of a single currency for these countries means replacing

  6. Amino acid sequence of myoglobin from emu (Dromaius novaehollandiae) skeletal muscle.

    Science.gov (United States)

    Suman, S P; Joseph, P; Li, S; Beach, C M; Fontaine, M; Steinke, L

    2010-11-01

    The objective of the present study was to characterize the primary structure of emu myoglobin (Mb). Emu Mb was isolated from Iliofibularis muscle employing gel-filtration chromatography. Matrix Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry was employed to determine the exact molecular mass of emu Mb in comparison with horse Mb, and Edman degradation was utilized to characterize the amino acid sequence. The molecular mass of emu Mb was 17,380 Da and was close to those reported for ratite and poultry myoglobins. Similar to myoglobins from meat-producing livestock and birds, emu Mb has 153 amino acids. Emu Mb contains 9 histidines. Proximal and distal histidines, responsible for coordinating oxygen-binding property of Mb, are conserved in emu. Emu Mb shared more than 90% homology with ratite and chicken myoglobins, whereas it demonstrated only less than 70% sequence similarity with ruminant myoglobins.

  7. Communication model of emuStudio emulation platform

    CERN Document Server

    Jakubčo, Peter; Ádám, Norbert

    2010-01-01

    Within the paper a description of communication model of plug-in based emuStudio emulation platform is given. The platform mentioned above allows the emulation of whole computer systems, configurable to the level of its components, represented by the plug-in modules of the platform. Development tasks still are in progress at the home institution of the authors. Currently the platform is exploited for teaching purposes within subjects aimed at machine-oriented languages and computer architectures. Versatility of the platform, given by its plug-in based architecture is a big advantage, when used as a teaching support tool. The paper briefly describes the emuStudio platform at its introductory part and then the mechanisms of inter-module communication are described.

  8. The ASKAP/EMU Source Finding Data Challenge

    CERN Document Server

    Hopkins, A M; Seymour, N; Chow, K E; Norris, R P; Bonavera, L; Breton, R; Carbone, D; Ferrari, C; Franzen, T M O; Garsden, H; Gonzalez-Nuevo, J; Hales, C A; Hancock, P J; Heald, G; Herranz, D; Huynh, M; Jurek, R J; Lopez-Caniego, M; Massardi, M; Mohan, N; Molinari, S; Orru, E; Paladino, R; Pestalozzi, M; Pizzo, R; Rafferty, D; Rottgering, H J A; Rudnick, L; Schisano, E; Shulevski, A; Swinbank, J; Taylor, R; van der Horst, A J

    2015-01-01

    The Evolutionary Map of the Universe (EMU) is a proposed radio continuum survey of the Southern Hemisphere up to declination +30 deg., with the Australian Square Kilometre Array Pathfinder (ASKAP). EMU will use an automated source identification and measurement approach that is demonstrably optimal, to maximise the reliability, utility and robustness of the resulting radio source catalogues. As part of the process of achieving this aim, a "Data Challenge" has been conducted, providing international teams the opportunity to test a variety of source finders on a set of simulated images. The aim is to quantify the accuracy of existing automated source finding and measurement approaches, and to identify potential limitations. The Challenge attracted nine independent teams, who tested eleven different source finding tools. In addition, the Challenge initiators also tested the current ASKAPsoft source-finding tool to establish how it could benefit from incorporating successful features of the other tools. Here we p...

  9. Taylor rule and EMU Monetary Policy Determination and ECB's Preferences

    Directory of Open Access Journals (Sweden)

    Svatopluk Kapounek

    2006-01-01

    Full Text Available The aim of the article is to evaluate the preferences of the ECB in monetary policy and to compare them with preferences of the central banks of new EU member countries from Central and Eastern Europe. The ECB's responsibility for the primary objective (price stability often contrasts with the requirement for economic growth stabilization policy from the national governments. There are doubts if the current members of Eurozone constitute an optimum currency area (the Eurozone 12 is recently the combination of rapidly growing and slow-growing - low inflationary countries. The differences between the countries will even expand during the European monetary union enlargement by new EU member countries. Consequently the probability of asymmetric shocks will increase. The main question is the ability of ECB to fulfill the needs of all EMU member countries in terms of optimal monetary policy. In the first part the authors analyze differences between the preferences of the ECB and national authorities (governments. The negative experiences of Ireland, Italy and other EMU members with current status quo help us to understand fear of future member countries from possible impact of common monetary policy on their national economies. The second part of the paper deals with interest rates determination by ECB and compares it with expectations (requirements from EMU member and EMU candidate countries. The main contribution of the article may be seen in central bank's preferences analyses – the preferences are defined as the parameters in Taylor rule (the weights given by ECB and national authorities to the price stability and economic growth stimulation. The hypothesis is defined as following: are the preferences of ECB in line with the preferences of national central banks of EMU candidate countries? The empirical analysis is based on the Taylor rule decomposition. The hypothesis is tested by regression analysis. Time series regression model uses relations

  10. EMU – Fiscal Challenges: Conclusions For the New EU Members.

    OpenAIRE

    2005-01-01

    The aim of the paper is to evaluate fiscal challenges which are facing the Economic and Monetary Union countries after four years of monetary union functioning. Then, the author formulates conclusions for accession countries which are planning to become members of the Economic and Monetary Unions in the near future. The first part of the paper deals with the criteria of fiscal stabilization within EMU, their significance and links to economic growth. On the one hand, these criteria limit poss...

  11. Equilibrium II: Acids and Bases. Independent Learning Project for Advanced Chemistry (ILPAC). Unit P3.

    Science.gov (United States)

    Inner London Education Authority (England).

    This unit on equilibrium is one of 10 first year units produced by the Independent Learning Project for Advanced Chemistry (ILPAC). The unit, which consists of two levels, focuses on the application of equilibrium principles to equilibria involving weak acids and bases, including buffer solutions and indicators. Level one uses Le Chatelier's…

  12. Equilibrium I: Principles. Independent Learning Project for Advanced Chemistry (ILPAC). Unit P2.

    Science.gov (United States)

    Inner London Education Authority (England).

    This unit on the principles of equilibrium is one of 10 first year units produced by the Independent Learning Project for Advanced Chemistry (ILPAC). The unit consists of two levels. After a treatment of non-mathematical aspects in level one (the idea of a reversible reaction, characteristics of an equilibrium state, the Le Chatelier's principle),…

  13. The Gaseous State. Independent Learning Project for Advanced Chemistry (ILPAC). Unit P1.

    Science.gov (United States)

    Inner London Education Authority (England).

    This unit on the gaseous state is one of 10 first year units produced by the Independent Learning Project for Advanced Chemistry (ILPAC). The unit consists of two levels. Level one deals with the distinctive characteristics of gases, then considers the gas laws, in particular the ideal gas equation and its applications. Level two concentrates on…

  14. Hydrocarbons. Independent Learning Project for Advanced Chemistry (ILPAC). Unit O1.

    Science.gov (United States)

    Inner London Education Authority (England).

    This unit on hydrocarbons is one of 10 first year units produced by the Independent Learning Project for Advanced Chemistry (ILPAC). The unit is divided into sections dealing with alkanes, alkenes, alkynes, arenes, and several aspects of the petroleum industry. Two experiments, exercises (with answers), and pre- and post-tests are included.…

  15. Advances in hair transplantation: longitudinal partial follicular unit transplantation.

    Science.gov (United States)

    Gho, Coen G; Neumann, H A Martino

    2015-01-01

    There are different techniques of hair transplantation. The most common and known hair transplantation methods are the 'strip' method, where a strip of skin containing hair follicles is removed, cut into grafts and implanted in the recipient area, and the follicle unit extraction (FUE) method, in which whole follicle units are extracted one by one and implanted one by one back into the recipient area. The FUE method is more patient friendly and leaves only tiny scars compared to the strip method, which leaves visible linear scars at the donor area. Both methods, however, have the major disadvantage that the extracted hair follicles are removed and the availability of donor hair follicles are limited and results in a decrease in hair density, as no re-grow will occur in the donor area. Since partial longitudinal-follicular unit transplantation (PL-FUT) extracts partial longitudinal follicular units that can be used as complete follicular units to regenerate completely differentiated hair growth and the partial follicular units that remain in the dermis in the donor area can survive and produce hair, PL-FUT enables us to multiply hair follicles in vivo while preserving the donor area. Although this technique is suitable for androgenic alopecia, PL-FUT could also be suitable in persons who have a relative small donor area compared to the recipient area like burn victims, as well as scarring alopecia's like frontal fibrosing alopecia.

  16. Advanced Composite Bipolar Plate for Unitized Regenerative Fuel Cell/Electrolyzer Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Development of an advanced composite bipolar plate is proposed for a unitized regenerative fuel cell and electrolyzer system that operates on pure feed streams...

  17. Newman Unit 1 advanced solar repowering. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-04-01

    The five appendices give the selection process and system specification of the Newman Unit 1 solar repowering system, including the conceptual design drawings and diagrams; input data for the simulation program; and a review of the most important characteristics of the existing plant. (LEW)

  18. Status of rehabilitation of the Maralinga and Emu sites

    Energy Technology Data Exchange (ETDEWEB)

    Rawson, R.; Davoren, P.; Perkins, C. [Department of Primary Industries and Energy, Canberra, ACT (Australia)

    1997-12-31

    The $100 million rehabilitation project of the former British nuclear test sites at Maralinga and Emu, South Australia, is progressing with implementation of an option identified by a Technical Assessment Group. The Maralinga Rehabilitation Project was agreed by the Commonwealth and South Australian Governments, and by the Maralinga Tjarutja traditional owners. The Project, which was assisted by an ex gratia payment of 20 million pounds by the British Government, is the largest clean-up of a former nuclear test site, and the first to be undertaken on a commercial basis. The work program is proceeding on time and within budget and is due to be completed in 1998/99. At Maralinga, plutonium-contaminated soil is being removed and buried in trenches at the Taranaki, TM and Wewak sites, with the work due to be completed at the end of 1997. After monitoring and clearance by the Australian Radiation Laboratory, clean soil will be distributed over rehabilitated lots and trenches, and the areas re vegetated. At Taranaki, 21 radioactively contaminated burial pits will be stabilised using in-situ vitrification (ISV), a process which melts contaminated soil by means of large electric currents applied through graphitic electrodes, producing a strong, leach resistant, glass ceramic block. Construction of ISV equipment is in progress, and the vitrification of the pits due to commence in early 1998. The Emu site does not have a significant plutonium contamination hazard, and will be left without rehabilitation. By the end of 1997, boundary markers will be placed around the Taranaki area at Maralinga, to indicate that the area is suitable for transit, but not permanent habitation, by the traditional owners. Boundary markers will also be placed around sites at Emu. Once the clean up is completed, it is intended that control of the site be returned from Commonwealth to the South Australian Government for addition to the freehold lands of Maralinga Tjarutja. 7 refs., 3 figs.

  19. Centrifugal microfluidic platforms: advanced unit operations and applications.

    Science.gov (United States)

    Strohmeier, O; Keller, M; Schwemmer, F; Zehnle, S; Mark, D; von Stetten, F; Zengerle, R; Paust, N

    2015-10-01

    Centrifugal microfluidics has evolved into a mature technology. Several major diagnostic companies either have products on the market or are currently evaluating centrifugal microfluidics for product development. The fields of application are widespread and include clinical chemistry, immunodiagnostics and protein analysis, cell handling, molecular diagnostics, as well as food, water, and soil analysis. Nevertheless, new fluidic functions and applications that expand the possibilities of centrifugal microfluidics are being introduced at a high pace. In this review, we first present an up-to-date comprehensive overview of centrifugal microfluidic unit operations. Then, we introduce the term "process chain" to review how these unit operations can be combined for the automation of laboratory workflows. Such aggregation of basic functionalities enables efficient fluidic design at a higher level of integration. Furthermore, we analyze how novel, ground-breaking unit operations may foster the integration of more complex applications. Among these are the storage of pneumatic energy to realize complex switching sequences or to pump liquids radially inward, as well as the complete pre-storage and release of reagents. In this context, centrifugal microfluidics provides major advantages over other microfluidic actuation principles: the pulse-free inertial liquid propulsion provided by centrifugal microfluidics allows for closed fluidic systems that are free of any interfaces to external pumps. Processed volumes are easily scalable from nanoliters to milliliters. Volume forces can be adjusted by rotation and thus, even for very small volumes, surface forces may easily be overcome in the centrifugal gravity field which enables the efficient separation of nanoliter volumes from channels, chambers or sensor matrixes as well as the removal of any disturbing bubbles. In summary, centrifugal microfluidics takes advantage of a comprehensive set of fluidic unit operations such as

  20. EMU Fiscal Challenges: Conclusions for the New Members of the EU

    OpenAIRE

    2004-01-01

    The aim of the paper is to evaluate the fiscal challenges which have appeared before EMU (Economic and Monetary Union) countries after four years of monetary union functioning. Then the author formulates conclusions for accession countries, which plan to be members of EMU in the near future. The first part of the paper deals with criteria of fiscal stabilization within EMU, their meaning and connections with economic growth. The fiscal stabilization criteria were taken from the Pact of Stabil...

  1. Limb patterning genes and heterochronic development of the emu wing bud

    Directory of Open Access Journals (Sweden)

    Craig A. Smith

    2016-12-01

    Full Text Available Abstract Background The forelimb of the flightless emu is a vestigial structure, with greatly reduced wing elements and digit loss. To explore the molecular and cellular mechanisms associated with the evolution of vestigial wings and loss of flight in the emu, key limb patterning genes were examined in developing embryos. Methods Limb development was compared in emu versus chicken embryos. Immunostaining for cell proliferation markers was used to analyze growth of the emu forelimb and hindlimb buds. Expression patterns of limb patterning genes were studied, using whole-mount in situ hybridization (for mRNA localization and RNA-seq (for mRNA expression levels. Results The forelimb of the emu embryo showed heterochronic development compared to that in the chicken, with the forelimb bud being retarded in its development. Early outgrowth of the emu forelimb bud is characterized by a lower level of cell proliferation compared the hindlimb bud, as assessed by PH3 immunostaining. In contrast, there were no obvious differences in apoptosis in forelimb versus hindlimb buds (cleaved caspase 3 staining. Most key patterning genes were expressed in emu forelimb buds similarly to that observed in the chicken, but with smaller expression domains. However, expression of Sonic Hedgehog (Shh mRNA, which is central to anterior–posterior axis development, was delayed in the emu forelimb bud relative to other patterning genes. Regulators of Shh expression, Gli3 and HoxD13, also showed altered expression levels in the emu forelimb bud. Conclusions These data reveal heterochronic but otherwise normal expression of most patterning genes in the emu vestigial forelimb. Delayed Shh expression may be related to the small and vestigial structure of the emu forelimb bud. However, the genetic mechanism driving retarded emu wing development is likely to rest within the forelimb field of the lateral plate mesoderm, predating the expression of patterning genes.

  2. Advanced direct liquefaction concepts for PETC generic units

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    In the Advance Coal Liquefaction Concept Proposal (ACLCP) carbon monoxide (CO) and water have been proposed as the primary reagents in the pretreatment process. The main objective of this project is to develop a methodology for pretreating coal under mild conditions based on a combination of existing processes which have shown great promise in liquefaction, extraction and pyrolysis studies. The aim of this pretreatment process is to partially depolymerise the coal, eliminate oxygen and diminish the propensity for retograde reactions during subsequent liquefaction. The desirable outcome of the CO pretreatment step should be: (1) enhanced liquefaction activity and/or selectivity toward products of higher quality due to chemical modification of the coal structure; (2) cleaner downstream products; (3) overall improvement in operability and process economics.

  3. Implementation of ergonomics in a service unit: challenges and advances.

    Science.gov (United States)

    Penteado, Eliane Villas Bôas de Freitas; de França, Maria Goretti; Ramalhoto, Ana Maria de Brito; de Oliveira, Ana Maria; Machado, Bruno Rangel Cortoppassi; Genipapeiro, Joana Angélica Matos

    2012-01-01

    This article discusses the implementation of ergonomics in a service unit of a major company in the energy sector. From the perspective of management, it analyses the process of implementation of ergonomics programmes in four operational areas. The objective was to diagnose the level of implementation of ergonomics. The study is descriptive, undertaken through the interaction with the technical staff of the operational areas involved, incorporating the perception of these role players concerning their work routines. The results indicated significant differences in the level of implementation of the programmes, especially those concerning structural conditions. Important conquests were registered, such as the investment in the training of specialists, the establishment of a facilitator network and the improvement of the standard for the directioning and alignment of the execution of initiatives. The linking in of the programmes with those of occupational health management emphasises its contribution to the safety and well-being of the workforce through interventions aimed mainly at eliminating and reducing ergonomic biomechanical risks. However, the need to broaden and deepen the ergonomic approach regarding organizational and cognitive aspects, as well as the insertion of ergonomics in project design of new work spaces and processes were also identified.

  4. Advanced Direct Liquefaction Concepts for PETC Generic Units - Phase II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1997-09-01

    Reported here are the results of Laboratory and Bench- Scale experiments and supporting technical and economic assessments conducted under DOE Contract No. DE- AC22- 91PC91040 during the period April 1, 1997 to June 30, 1997. This contract is with the University of Kentucky Research Foundation which supports work with the University of Kentucky Center for Applied Energy Research, CONSOL, Inc., LDP Associates, and Hydrocarbon Technologies, Inc. This work involves the introduction into the basic two stage liquefaction process several novel concepts which includes dispersed lower- cost catalysts, coal cleaning by oil agglomeration, and distillate hydrotreating and dewaxing. This report includes a data analysis of the ALC- 2 run which was the second continuous run in which Wyodak Black Thunder coal was fed to a two kg/ h bench- scale unit. One of the objectives of that run was to determine the relative activity of several Mo- based coal impregnated catalyst precursors. The precursors included ammonium heptamolybdate (100 mg Mo/ kg dry coal), which was used alone as well as in combination with ferrous sulfate (1% Fe/ dry coal) and nickel sulfate (50 mg Ni/ kg dry coal). The fourth precursor that was tested was phosphomolybdic acid which was used at a level of 100 mg Mo/ kg dry coal. Because of difficulties in effectively separating solids from the product stream, considerable variation in the feed stream occurred. Although the coal feed rate was nearly constant, the amount of recycle solvent varied which resulted in wide variations of resid, unconverted coal and mineral matter in the feed stream. Unfortunately, steady state was not achieved in any of the four conditions that were run. Earlier it was reported that Ni- Mo catalyst appeared to give the best results based upon speculative steady- state yields that were developed.

  5. Effects of Topical Emu Oil on Burn Wounds in the Skin of Balb/c Mice

    Science.gov (United States)

    Afshar, Mohammad; Ghaderi, Reza; Zardast, Mahmoud; Delshad, Parvin

    2016-01-01

    The goal of this study was to determine the effect of topical Emu oil on the healing of burn wounds and hair follicle restoration in superficial II-degree burns in the skin of Balb/c mice. Thirty-two male Balb/c mice with burns on the back of the neck were divided into two groups: The Emu oil group received topical Emu oil twice daily, whereas the control was left untreated. Skin biopsies were obtained on days 4, 7, 10, and 14 of the experiment. Then the specimens were viewed with Olympus SZX research microscope. The Emu oil treated burns were found to heal more slowly and inflammation lasted longer in this group. The number of hair follicles in the margins of the wounds increased through time in the Emu oil group compared to the control group. Also, the hair follicles in the Emu oil group were in several layers and seemed to be more active and mature. Moreover, Emu oil had a positive effect on fibrogenesis and synthesis of collagen. The findings indicate that although Emu oil delays the healing process, it has a positive effect on wound healing and it increases the number of hair follicles in the margins of the wound. PMID:27069472

  6. Internal and external transmissions of monetary and fiscal policies in the EMU

    NARCIS (Netherlands)

    Aarle, B. van; Garretsen, J.H.; Moorsel, C. van

    2001-01-01

    With the introduction of Economic and Monetary Union (EMU), the sovereignty of national monetary institutions has been replaced by a common monetary institution, the European Central Bank (ECB) and national currencies have been replaced by a common currency, the euro. EMU therefore implies the loss

  7. Effects of Topical Emu Oil on Burn Wounds in the Skin of Balb/c Mice

    Directory of Open Access Journals (Sweden)

    Mohammad Afshar

    2016-01-01

    Full Text Available The goal of this study was to determine the effect of topical Emu oil on the healing of burn wounds and hair follicle restoration in superficial II-degree burns in the skin of Balb/c mice. Thirty-two male Balb/c mice with burns on the back of the neck were divided into two groups: The Emu oil group received topical Emu oil twice daily, whereas the control was left untreated. Skin biopsies were obtained on days 4, 7, 10, and 14 of the experiment. Then the specimens were viewed with Olympus SZX research microscope. The Emu oil treated burns were found to heal more slowly and inflammation lasted longer in this group. The number of hair follicles in the margins of the wounds increased through time in the Emu oil group compared to the control group. Also, the hair follicles in the Emu oil group were in several layers and seemed to be more active and mature. Moreover, Emu oil had a positive effect on fibrogenesis and synthesis of collagen. The findings indicate that although Emu oil delays the healing process, it has a positive effect on wound healing and it increases the number of hair follicles in the margins of the wound.

  8. Newman Unit 1 advanced solar repowering advanced conceptual design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-04-01

    The Newman Unit 1 solar repowering design is a water/steam central receiver concept supplying superheated steam. The work reported is to develop a refined baseline conceptual design that has potential for construction and operation by 1986, makes use of existing solar thermal technology, and provides the best economics for this application. Trade studies performed in the design effort are described, both for the conceptual design of the overall system and for the subsystem conceptual design. System-level functional requirements, design, operation, performance, cost, safety, environmental, institutional, and regulatory considerations are described. Subsystems described include the collector, receiver, fossil energy, electrical power generating, and master control subsystems, site and site facilities. The conceptual design, cost, and performance of each subsystem is discussed at length. A detailed economic analysis of the repowered unit is made to realistically assess the economics of the first repowered unit using present cost data for a limited production level for solar hardware. Finally, a development plan is given, including the design, procurement, construction, checkout, startup, performance validation, and commercial operation. (LEW)

  9. Clothing and Textiles Curriculum Guide. Basic Unit, Advanced Unit, and Semester Course. Draft.

    Science.gov (United States)

    Casey, Ruth; And Others

    The clothing and textiles guide, part of a consumer and homemaking education unit, was developed in a 3-week curriculum workshop at Winthrop College in June 1972. The identified objectives and learning experiences have been developed with basic reference to developmental tasks, needs, interests, capacities, and prior learning experiences of…

  10. Advanced Unit Commitment Strategies for the U.S. Eastern Interconnection: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ela, E.; Milligan, M.; Meibom, P.; Barth, R.; Tuohy, A.

    2010-10-01

    This paper outlines a study undertaken for the U.S. Eastern Interconnection in which different advanced unit commitment strategies were simulated for three different years to evaluate the benefits that may occur from using these strategies as an operational tool.

  11. Advanced Unit Commitment Strategies for the U.S. Eastern Interconnection: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ela, E.; Milligan, M.; Meibom, P.; Barth, R.; Tuohy, A.

    2010-10-01

    This paper outlines a study undertaken for the U.S. Eastern Interconnection in which different advanced unit commitment strategies were simulated for three different years to evaluate the benefits that may occur from using these strategies as an operational tool.

  12. Application of CyboCon Advanced Adjustment and Control Software Package in Delayed Coking Unit

    Institute of Scientific and Technical Information of China (English)

    Guo Hua

    2002-01-01

    This article refers to application of the CyboCon software package based upon the model-free adaptive control (MFA) in the 800-kt/a delayed coking unit to realize an advanced adjustment and control strategy for the temperature control of the heater. Operation tests have revealed the convenience in operating system and simplicity in maintenance, leading to good economic benefits.

  13. Ecologia: Spanish Ecology Packet Resource Units and Materials for Intermediate and Advanced Spanish Classes.

    Science.gov (United States)

    Bell, Mozelle Sawyer; Arribas, E. Jaime

    This Spanish ecology packet contains resource units and materials for intermediate and advanced Spanish classes. It is designed to be used for individual and small-group instruction in the senior high school to supplement the Spanish language curriculum. Included are articles, pictures, and cartoons from Spanish-language newspapers and magazines…

  14. The Economic Consequences of a Large EMU Results of Macroeconomic Model Simulations

    Directory of Open Access Journals (Sweden)

    Fritz Breuss

    1997-05-01

    Full Text Available Recent economic forecasts increase the probability that firstly, the EMU can start as planned on January 1, 1999 and secondly, that it will start with a large group of countries. The economic implications of the artificially unification of "hard-currency" and "soft-currency" countries are analysed by means of macroeconomic model simulations. The results of a large "non-optimal" EMU are as expected. On the one hand, there are positive income effects for all countries although unevenly distributed over the participants on the other hand, the internal (inflation and external (value of the Euro vis-à-vis the Dollar stability are at risk. The "hard-currency" group will be the major winner (in terms of real GDP and employment, whereas the "soft-currency" group has to carry the adjustment costs to a regime of fixed exchange rates (Euro which results in slower growth, decline in employment and a deterioration of their budgetary position. The necessary convergence of prices and interest rates leads to an increase (decrease of inflation and interest rates in the "hard-currency" countries ("soft-currency" countries. If the EMU will start with a large group there will be a tendency to devalue the Euro against the Dollar. As a consequence of the uneven economic performance of a large (non-optimal EMU I would suggest to start the EMU with a core group of "hard-currency" countries. After this mini EMU succeeded the other Member States could join the EMU.

  15. Limitation to Advanced Life Support in patients admitted to intensive care unit with integrated palliative care

    Science.gov (United States)

    Mazutti, Sandra Regina Gonzaga; Nascimento, Andréia de Fátima; Fumis, Renata Rego Lins

    2016-01-01

    Objective To estimate the incidence of limitations to Advanced Life Support in critically ill patients admitted to an intensive care unit with integrated palliative care. Methods This retrospective cohort study included patients in the palliative care program of the intensive care unit of Hospital Paulistano over 18 years of age from May 1, 2011, to January 31, 2014. The limitations to Advanced Life Support that were analyzed included do-not-resuscitate orders, mechanical ventilation, dialysis and vasoactive drugs. Central tendency measures were calculated for quantitative variables. The chi-squared test was used to compare the characteristics of patients with or without limits to Advanced Life Support, and the Wilcoxon test was used to compare length of stay after Advanced Life Support. Confidence intervals reflecting p ≤ 0.05 were considered for statistical significance. Results A total of 3,487 patients were admitted to the intensive care unit, of whom 342 were included in the palliative care program. It was observed that after entering the palliative care program, it took a median of 2 (1 - 4) days for death to occur in the intensive care unit and 4 (2 - 11) days for hospital death to occur. Many of the limitations to Advanced Life Support (42.7%) took place on the first day of hospitalization. Cardiopulmonary resuscitation (96.8%) and ventilatory support (73.6%) were the most adopted limitations. Conclusion The contribution of palliative care integrated into the intensive care unit was important for the practice of orthothanasia, i.e., the non-extension of the life of a critically ill patient by artificial means. PMID:27626949

  16. An aerial radiological survey of Maralinga and EMU, South Australia

    Energy Technology Data Exchange (ETDEWEB)

    Tipton, W J; Berry, H A; Fritzsche, A E

    1988-10-01

    An aerial radiological survey was conducted over the former British nuclear test ranges at Maralinga and Emu in South Australia from May through July 1987. The survey covered an area of approximately 1,550 square kilometers which included the nine major trial sites, where a nuclear yield occurred, and all the minor trial sites, where physics experiments were conducted. Flight lines were flown at an altitude of 30 meters with line spacings of 50, 100, and 200 meters depending on the area and whether man-made contamination was present. Results of the aerial survey were processed for americium-241 (used to determine plutonium contamination), cesium-137, cobalt-60, and uranium-238. The aerial survey also detected the presence of europium-152, a soil activation product, in the immediate vicinity of the major trial ground zeros. Ground measurements were also made at approximately 120 locations using a high-resolution germanium detector to provide supplemental data for the aerial survey. This survey was conducted as part of a series of studies being conducted over a two to three-year timeframe to obtain information from which options and associated costs can be formulated about the decontamination and possible rehabilitation of the former nuclear test sites.

  17. Payload influences on technology development and utilization of the Space Shuttle extravehicular mobility unit

    Science.gov (United States)

    Patrick, J. W.; Kraly, E. F.

    1976-01-01

    Historical EVA approaches are examined. The considered data emphasize the overall importance of EVA for Shuttle payload operations. Twenty requirement categories related to crew protection, crew performance, and payload protection are listed in a table. Attention is given to a preliminary assessment of payload related requirements, an evaluation of the natural thermal environment in the case of the Shuttle orbiter bay, and the ability of the extravehicular mobility unit (EMU) to protect the crewman from induced or natural radiation as found in the Van Allen radiation belt South Atlantic anomaly. On the basis of the evaluation it appears very likely that design improvements alone can make the EMU meet payload requirements without requiring significant technology advances.

  18. Research and Application of FTA and Petri Nets in Fault Diagnosis in the Pantograph-Type Current Collector on CRH EMU Trains

    Directory of Open Access Journals (Sweden)

    Long-long Song

    2015-01-01

    Full Text Available A fault tree is established based on structural analysis, working principle analysis, and failure mode and effects analysis (FMEA of the pantograph-type current collector on the Chinese Rail High-Speed Electric Multiple Unit (CRH EMU train. To avoid the deficiencies of fault tree analysis (FTA, Petri nets modelling is used to address the problem of data explosion and carry out dynamic diagnosis. Relational matrix analysis is used to solve the minimal cut set equation of the fault tree. Based on the established state equation of the Petri nets, initial tokens and enable-transfer algorithms are used to express the fault transfer process mathematically and improve the efficiency of fault diagnosis inferences. Finally, using a practical fault diagnosis example for the pantographs on CRH EMU trains, the proposed method is proved to be reasonable and effective.

  19. Technological and nutritional properties of ostrich, emu, and rhea meat quality

    Directory of Open Access Journals (Sweden)

    Horbańczuk Olaf K.

    2016-09-01

    Full Text Available In recent years a growing demand for ratite meat, including ostrich, emu, and rhea has been observed all over the world. However, consumers as well as the meat industry still have limited and scattered knowledge about this type of meat, especially in the case of emu and rhea. Thus, the aim of the present review is to provide information on technological and nutritional properties of ostrich, emu, and rhea meat, including carcass composition and yields, physicochemical characteristics, and nutritive value. Carcass yields and composition among ratites are comparable, with the exception of higher content of fat in emu. Ostrich, emu, and rhea meat is darker than beef and ratite meat acidification is closer to beef than to poultry. Ratite meat can be recognised as a dietetic product mainly because of its low level of fat, high content of polyunsaturated fatty acids (PUFA, favourable n6/n3 ratio, and high iron content in comparison with beef and chicken meat. Ratite meat is also rich in selenium, copper, vitamin B, and biologically active peptides such as creatine (emu and anserine (ostrich, and has low content of sodium (ostrich. The abundance of bioactive compounds e.g. PUFA, makes ratite meat highly susceptible to oxidation and requires research concerning elaboration of innovative, intelligent packaging system for protection of nutritional and technological properties of this meat.

  20. The Economic Consequences of a Large EMU Results of Macroeconomic Model Simulations

    Directory of Open Access Journals (Sweden)

    Fritz Breuss

    1997-05-01

    Full Text Available Recent economic forecasts increase the probability that firstly, the EMU can start as planned on January 1, 1999 and secondly, that it will start with a large group of countries. The economic implications of the artificially unification of "hard-currency" and "soft-currency" countries are analysed by means of macroeconomic model simulations. The results of a large "non-optimal" EMU are as expected. On the one hand, there are positive income effects for all countries although unevenly distributed over the participants on the other hand, the internal (inflation and external (value of the Euro vis-à-vis the Dollar stability are at risk. The "hard-currency" group will be the major winner (in terms of real GDP and employment, whereas the "soft-currency" group has to carry the adjustment costs to a regime of fixed exchange rates (Euro which results in slower growth, decline in employment and a deterioration of their budgetary position. The necessary convergence of prices and interest rates leads to an increase (decrease of inflation and interest rates in the "hard-currency" countries ("soft-currency" countries. If the EMU will start with a large group there will be a tendency to devalue the Euro against the Dollar. As a consequence of the uneven economic performance of a large (non-optimal EMU I would suggest to start the EMU with a core group of "hard-currency" countries. After this mini EMU succeeded the other Member States could join the EMU.

  1. The Economic Consequences of a Large EMU – Results of Macroeconomic Model Simulations

    Directory of Open Access Journals (Sweden)

    Fritz Breuss

    1997-05-01

    Full Text Available Recent economic forecasts increase the probability that firstly, the EMU can start as planned on January 1, 1999 and secondly, that it will start with a large group of countries. The economic implications of the artificially unification of "hard-currency" and "soft-currency" countries are analysed by means of macroeconomic model simulations. The results of a large "non-optimal" EMU are as expected. On the one hand, there are positive income effects for all countries – although unevenly distributed over the participants – on the other hand, the internal (inflation and external (value of the Euro vis-à-vis the Dollar stability are at risk. The "hard-currency" group will be the major winner (in terms of real GDP and employment, whereas the "soft-currency" group has to carry the adjustment costs to a regime of fixed exchange rates (Euro which results in slower growth, decline in employment and a deterioration of their budgetary position. The necessary convergence of prices and interest rates leads to an increase (decrease of inflation and interest rates in the "hard-currency" countries ("soft-currency" countries. If the EMU will start with a large group there will be a tendency to devalue the Euro against the Dollar. As a consequence of the uneven economic performance of a large (non-optimal EMU I would suggest to start the EMU with a core group of "hard-currency" countries. After this mini EMU succeeded the other Member States could join the EMU.

  2. Effect of advanced age and vital signs on admission from an emergency department observation unit

    Science.gov (United States)

    Caterino, Jeffrey M.; Hoover, Emily; Moseley, Mark G.

    2012-01-01

    Objectives The primary objective was to determine the relationship between advanced age and need for admission from an emergency department (ED) observation unit. The secondary objective was to determine the relationship between initial ED vital signs and admission. Methods We conducted a prospective, observational cohort study of ED patients placed in an ED-based observation unit. Multivariable penalized maximum likelihood logistic regression was used to identify independent predictors of need for hospital admission. Age was examined continuously and at a cutoff of ≥65 years. Vital signs were examined continuously and at commonly accepted cutoffs. We additionally controlled for demographics, co-morbid conditions, laboratory values, and observation protocol. Results Three hundred patients were enrolled, 12% (n=35) ≥65 years old and 11% (n=33) requiring admission. Admission rates were 2.9% (95% confidence interval [CI], 0.07-14.9%) in older adults and 12.1% (95% CI, 8.4-16.6%) in younger adults. In multivariable analysis, age was not associated with admission (odds ratio [OR] 0.30, 95% CI 0.05-1.67). Predictors of admission included: systolic pressure ≥180 mmHg (OR 4.19, 95% CI 1.08-16.30), log Charlson co-morbidity score (OR 2.93, 95% CI 1.57-5.46), and white blood cell count ≥14,000/mm3 (OR11.35, 95% CI 3.42-37.72). Conclusions Among patients placed in an ED observation unit, age ≥65 years is not associated with need for admission. Older adults can successfully be discharged from these units. Systolic pressure≥180 mmHg was the only predictive vital sign. In determining appropriateness of patients selected for an ED observation unit, advanced age should not be an automatic disqualifying criterion. PMID:22386358

  3. Emu oil decreases atherogenic plaque formation in cafeteria diet-induced obese rats.

    Science.gov (United States)

    Kamalakkannan, Soundararajan; Tirupathi Pichiah, P B; Kalaiselvi, Seenivasan; Arunachalam, Sankarganesh; Achiraman, Shanmugam

    2016-07-01

    Atherosclerosis-induced coronary heart disease - caused by elevated levels of low-density lipoproteins (LDL) and inflammation - is one of the most prevalent diseases. Monounsaturated fatty acids are reported to prevent atherosclerosis; emu oil is a rich source of monounsaturated fatty acid, and we hypothesize that emu oil supplementation could lower inflammation and prevent atherosclerosis in diet-induced obese (DIO) animals. Male Wistar rats were randomly divided into five groups (n = 6), and fed with normal diet (chow pellet; ND), or with cafeteria diet (CD), or with CD along with emu oil supplementation at three different doses: ED1 (2 mL), ED2 (4 mL) and ED3 (8 mL) kg(-1) body weight (BW), respectively. After 12 weeks, the animals were sacrificed and serum was analysed for measuring lipid profile, C-reactive proteins, testosterone and luteinizing hormone. Histopathological studies were performed to observe atherogenic changes in thoracic aorta. Restoration of altered lipid and hormonal profiles, and inhibition of atherogenic changes in thoracic aorta, were observed with supplementation of emu oil, confirming its anti-atherosclerotic activity. The high content of oleic acid in emu oil could have orchestrated - either solely or in combination with linoleic and linolenic acids - causing the upregulation of testosterone biosynthesis and inhibition of atheromatous plaque formation in diet-induced obese animals. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

  4. NOAA Climate Data Record (CDR) of Advanced Microwave Sounding Unit (AMSU)-A Brightness Temperature, Version 1

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA Climate Data Record (CDR) for Advanced Microwave Sounding Unit-A (AMSU-A) brightness temperature in "window channels". The data cover a time period from...

  5. Data on melanin production in B16F1 melanoma cells in the presence of emu oil

    Directory of Open Access Journals (Sweden)

    Minoru Ito

    2016-12-01

    Full Text Available Here, we present data on the effects of emu oil, obtained from emu (Dromaius novaehollandiae fat deposits, on melanogenesis in B16F1 murine melanoma cells. The cells were cultured in media containing different concentrations of emu oil, and the melanin content of these cells was measured using a microplate reader. Next, melanin content was measured for cells cultured with α-melanocyte-stimulating hormone. This article reports the different melanin contents as μg melanin/mg cellular protein, by using bar graphs with error bars. The present data imply that emu oil reduces the cellular melanin production.

  6. New NOAA-15 Advanced Microwave Sounding Unit (AMSU) Datasets for Stratospheric Research

    Science.gov (United States)

    Spencer, Roy W.; Braswell, William D.

    1999-01-01

    The NOAA-15 spacecraft launched in May 1998 carried the first Advanced Microwave Sounding Unit (AMSU). The AMSU has eleven oxygen absorption channels with weighting functions peaking from near the surface to 2 mb. Twice-daily, limb-corrected I degree gridded datasets of layer temperatures have been constructed since the AMSU went operational in early August 1998. Examples of AMSU imagery will be shown, as will preliminary analyses of daily fluctuations in tropical stratospheric temperatures and their relationship to daily variations in tropical-average rainfall measured by the Special Sensor Microwave Imager (SSM/I). The AMSU datasets are now available for other researchers to utilize.

  7. Cyclical synchronization in the EMU along the financial crisis: An interpretation of the conflicting signals

    Directory of Open Access Journals (Sweden)

    Jose Ramon Cancelo

    2012-06-01

    Full Text Available We analyze how cyclical synchronization in the EMU evolved since the onset of the current financial crisis. The standard measures of cyclical correlation suggest that while the cycle of the euro area became more aligned with the cycles of other developed economies, the EMU itself apparently entered into a phase of cyclical divergence. We show that as a matter of fact the bulk of the member states remained closely aligned, and the seeming decline in synchronization is due to a few countries decoupling from the euro area. Next we present empirical evidence that the foundations that explain the evolution of the national cycles against the EMU aggregate through the crisis were already latent in 2007. Greece and Ireland deviate from the general pattern, the former because of its loose fiscal policy all along the period 2000-2007, and the latter due to the flexibility of its labor market.

  8. The euro and the large banks’ behaviour within the EMU – Entrepreneurial strategies and monetary policy

    Directory of Open Access Journals (Sweden)

    M. BORCHERT

    1999-03-01

    Full Text Available This paper connects different business cultures of large banks in various countries of the EMU with monetary policy issue of the ECB. First, the banks’ competitive potential as well as their strategic behaviour is outlined. Furthermore, a cluster analysis exhibits some banking groups according to the liability-orientation of the largest EMU-banks, and a factor analysis gives some additional information about their asset-orientation; both business orientations play an important role for the efficiency of monetary policy. FInally, the different cash requirements within the various European countries might lead to totally new bank strategies, yielding to an internationalization of large bank-credits.

  9. Advanced Stirling Radioisotope Generator Engineering Unit 2 (ASRG EU2) Final Assembly

    Science.gov (United States)

    Oriti, Salvatore M.

    2015-01-01

    NASA Glenn Research Center (GRC) has recently completed the assembly of a unique Stirling generator test article for laboratory experimentation. Under the Advanced Stirling Radioisotope Generator (ASRG) flight development contract, NASA GRC initiated a task to design and fabricate a flight-like generator for in-house testing. This test article was given the name ASRG Engineering Unit 2 (EU2) as it was effectively the second engineering unit to be built within the ASRG project. The intent of the test article was to duplicate Lockheed Martin's qualification unit ASRG design as much as possible to enable system-level tests not previously possible at GRC. After the cancellation of the ASRG flight development project, the decision was made to continue the EU2 build, and make use of a portion of the hardware from the flight development project. GRC and Lockheed Martin engineers collaborated to develop assembly procedures, leveraging the valuable knowledge gathered by Lockheed Martin during the ASRG development contract. The ASRG EU2 was then assembled per these procedures at GRC with Lockheed Martin engineers on site. The assembly was completed in August 2014. This paper details the components that were used for the assembly, and the assembly process itself.

  10. Cooperative and non-cooperative fiscal stabilization policies in the EMU

    NARCIS (Netherlands)

    Engwerda, J.; Aarle, B. van; Plasmans, J.E.J.

    2002-01-01

    In this paper we analyze the interaction of fiscal stabilization policies in the Economic and Monetary Union (EMU). The ‘Excessive Deficits’ procedure of the Maastricht treaty and its elaborations in the recent ‘Stability and Growth Pact’ introduce a set of fiscal stringency requirements on national

  11. Keynesian, Non-Keynesian or no effects of fiscal policy changes? The EMU Case

    NARCIS (Netherlands)

    Aarle, B. van; Garretsen, J.H.

    2003-01-01

    This paper studies the experiences with fiscal adjustments in the European Union (EU) countries during the transition period to the Economic and Monetary Union (EMU). Using several approaches suggested in the literature on fiscal adjustments and their macroeconomic effects and in the literature on E

  12. Keynesian, Non-Keynesian or No Effects of Fiscal Policy Changes?: The EMU Case

    NARCIS (Netherlands)

    Aarle, B. van; Garretsen, J.H.

    2001-01-01

    This paper studies the experiences with fiscal adjustments in the European Union (EU) countries during the transition period to the Economic and Monetary Union (EMU). Using several approaches suggested in the literature on fiscal adjustments and their macroeconomic effects and in the literature on E

  13. The Possibility of Central and Eastern European Countries' Joining the EMU: Prospects and Implications for Korea

    Directory of Open Access Journals (Sweden)

    Jeong-Cheol Han

    1999-03-01

    Full Text Available The old socialistic states of Middle and Eastern Europe is positively trying to accede to the EMU in order to enjoy the manifold rights of joining currency combination, not mention the political and diplomatic purposes. The EU brought forward the regulation of macro-economic reduction, system and law terms as the requirement of the entrance of those Middle and Eastern Europe countries. According to a survey, including Poland and Hungary, countries which took the lead in reforming agreed with EU on most of EU’ requirements about acceding to EMU. However, because of the domestic and foreign economic conditions, in the next 1 or 2years, none of the Middle and Eastern Europe countries could meet the requirement of reducing macro-economy. Whereas the degree of fulfillment of the economy reducing requirement and the factor that the Middle and Eastern Europe countries could accede to EU after 2003, it was predicted that those countries could accede to EMU only after 2005. With the coming on of EMU, the Middle and Eastern countries will accelerate the activity of currency combination. The South Korean government and enterprises also should intensify the prediction and precaution to the systems, policy change and other economic effects of these Middle and Eastern Europe countries.

  14. Keynesian, Non-Keynesian or No Effects of Fiscal Policy Changes?: The EMU Case

    NARCIS (Netherlands)

    Aarle, B. van; Garretsen, J.H.

    2001-01-01

    This paper studies the experiences with fiscal adjustments in the European Union (EU) countries during the transition period to the Economic and Monetary Union (EMU). Using several approaches suggested in the literature on fiscal adjustments and their macroeconomic effects and in the literature on

  15. EMuRgency: Addressing cardiac arrest with socio-technical innovation in a smart learning region

    NARCIS (Netherlands)

    Kalz, Marco; Klerkx, Joris; Parra, Gonzalo; Haberstroh, Max; Elsner, Jesko; Ternier, Stefaan; Schilberg, Daniel; Jeschke, Sabina; Duval, Erik; Specht, Marcus

    2013-01-01

    Kalz, M., Klerx, J., Parra, G., Haberstroh, M., Elsner, J., Ternier, S., Schilberg, D., Jeschke, S., Duval, E., & Specht, M. (2013). EMuRgency: Addressing cardiac arrest with socio-technical innovation in a smart learning region. Interaction Design and Architectures Journal. Summer 2013 (17), 77-91.

  16. The EMU after the Gauweiler Judgment and the Juncker Report / Jean-Victor Louis

    Index Scriptorium Estoniae

    Louis, Jean-Victor

    2016-01-01

    Majandus- ja rahaliidu (EMU) analüüsist peale Gauweiler'i kaasuse kohtuotsuse väljakuulutamist Euroopa Kohtus ja Juncker'i aruannet. Kohtuotsuse ja Juncker'i aruande järelduste tähtsusest Majandus- ja rahaliidule tulevikus

  17. Search for the lepton-flavour violating decay D-0 -> e(+/-)mu(-/+)

    NARCIS (Netherlands)

    Aaij, R.; Beteta, C. Abellan; Adeva, B.; Adinolfi, M.; Affolder, A.; Ajaltouni, Z.; Akar, S.; Albrecht, J.; Albrec, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; AlvarezCartelle, P.; Alves, A. A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Andreassi, G.; Andreotti, M.; Andrews, J. E.; Appleby, R. B.; Gutierrez, O. Aquines; Archilli, F.; d'Argent, P.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J. J.; Badalov, A.; Baesso, C.; Baldini, W.; Barlow, R. J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Battista, V.; Beaucourt, L.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Bel, L. J.; Bellee, V.; Belloli, N.; Belyaev, I.; Ben-Haim, E.; Bencivenni, G.; Benson, S.; Benton, J.; Berezhnoy, A.; Bernet, R.; Bertolin, A.; Bettler, M-O.; van Beuzekom, M.; Bifani, S.; Billoir, P.; Bird, T.; Birnkraut, A.; Bizzeti, A.; Blake, T.; Blanc, F.; Blouw, J.; Blusk, S.; Bocci, V.; Bondar, A.; Bondar, N.; Bonivento, W.; Borghi, S.; Borisyak, M.; Borsato, M.; Bowcock, T. J. V.; Bowen, E.; Bozzi, C.; Braun, S.; Britsch, M.; Britton, T.; Brodzicka, J.; Brook, N. H.; Buchanan, E.; Burr, C.; Bursche, A.; Buytaert, J.; Cadeddu, S.; Calabrese, R.; Calvi, M.; Calvo Gomez, M.; Campana, P.; Campora Perez, D.; Capriotti, L.; Carbone, A.; Carboni, G.; Cardinale, R.; Cardini, A.; Carniti, P.; Carson, L.; Akiba, K. Carvalho; Casse, G.; Cassina, L.; Castillo Garcia, L.; Cattaneo, M.; Cauet, Ch.; Cavallero, G.; Cenci, R.; Charles, M.; Charpentier, Ph.; Chefdeville, M.; Cheung, S-F.; Chiapolini, N.; Chrzaszcz, M.; Vidal, X. Cid; Ciezarek, G.; Clarke, P. E. L.; Clemencic, M.; Cliff, H. V.; Closier, J.; Coco, V.; Cogan, J.; Cogneras, E.; Cogoni, V.; Cojocariu, L.; Collazuol, G.; Collins, P.; Comerma-Montells, A.; Contu, A.; Cook, A.; Coombes, M.; Coquereau, S.; Corti, G.; Corvo, M.; Couturier, B.; Cowan, G. A.; Craik, D. C.; Crocombe, A.; Torres, M. Cruz; Cunliffe, S.; Currie, R.; D'Ambrosio, C.; Dall'Occo, E.; Dalseno, J.; David, P. N. Y.; Davis, A.; Francisco, O. De Aguiar; De Bruyn, K.; De Capua, S.; De Cian, M.; De Miranda, J. M.; De Paula, L.; De Simone, P.; Dean, C-T.; De Camp, D.; Deckenhoff, M.; Del Buono, L.; Deleage, N.; Demmer, M.; Derkach, D.; Deschamps, O.; Dettori, F.; Dey, B.; Di Canto, A.; Di Ruscio, F.; Donleavy, S.; Dordei, F.; Dorigo, M.; Suarez, A. Dosil; Dossett, D.; Dovbnya, A.; Dreimanis, K.; Dufour, L.; Dujany, G.; Durante, P.; Dzhelyadin, R.; Dziurda, A.; Dzyuba, A.; Easo, S.; Egede, U.; Egorychev, V.; Eidelman, S.; Eisenhardt, S.; Eitschberger, U.; Ekelhof, R.; Eklund, L.; El Rifai, I.; Elsasser, Ch.; Ely, S.; Esen, S.; Evans, H. M.; Evans, T.; Falabella, A.; Faerber, C.; Farley, N.; Farry, S.; Fay, R.; Ferguson, D.; Albor, V. Fernandez; Ferrari, F.; Rodrigues, F. Ferreira; Ferro-Luzzi, M.; Filippov, S.; Fiore, M.; Fiorini, M.; Firlej, M.; Fitzpatrick, C.; Fiutowski, T.; Fleuret, F.; Fohl, K.; Fol, P.; Fontana, M.; Fontanelli, F.; Forshaw, D. C.; Forty, R.; Frei, C.; Frosini, M.; Furfaro, E.; Torreira, A. Gallas; Galli, D.; Gallorini, S.; Gambetta, S.; Gandelman, M.; Gandini, P.; Garcia-Pardinas, J.; Tico, J. Garra; Garrido, L.; Gascon, D.; Gaspar, C.; Gauld, R.; Gavardi, L.; Gazzoni, G.; Gerick, D.; Gersabeck, E.; Gersabeck, M.; Gershon, T.; Ghez, Ph.; Giani, S.; Gibson, V.; Girard, O. G.; Giubega, L.; Gligorov, V. V.; Goebel, C.; Golubkov, D.; Golutvin, A.; Gotti, C.; Gandara, M. Grabalosa; Graciani Diaz, R.; Cardoso, L. A. Granado; Grauges, E.; Graverini, E.; Graziani, G.; Grecu, A.; Greening, E.; Gregson, S.; Griffith, P.; Grillo, L.; Gruenberg, O.; Gui, B.; Gushchin, E.; Guz, Yu.; Gys, T.; Hadavizadeh, T.; Hadjivasiliou, C.; Haefeli, G.; Haen, C.; Haines, S. C.; Hall, S.; Hamilton, B.; Hansmann-Menzemer, S.; Harnew, N.; Harnew, S. T.; Harrison, J.; He, J.; Head, T.; Heijne, V.; Heister, A.; Hennessy, K.; Henrard, P.; Henry, L.; Hernando Morata, J. A.; Van Herwijnen, E.; Hess, M.; Hicheur, A.; Hill, D.; Hoballah, M.; Hombach, C.; Hulsbergen, W.; Humair, T.; Hussain, N.; Hutchcroft, D.; Hynds, D.; Idzik, M.; Ilten, P.; Jacobsson, R.; Jalocha, J.; Jans, E.; Jawahery, A.; John, M.; Johnson, D.; Jones, C. R.; Joram, C.; Jost, B.; Jurik, N.; Kandybei, S.; Kanso, W.; Karacson, M.; Karbach, T. M.; Karodia, S.; Kecke, M.; Kelsey, M.; Kenyon, I. R.; Kenzie, M.; Ketel, T.; Khairullin, E.; Khanji, B.; Khurewathanakul, C.; Kirn, T.; Klaver, S.; Klimaszewski, K.; Kochebina, O.; Kolpin, M.; Komarov, I.; Koppenburg, P.; Kozeiha, M.; Kravchuk, L.; Kreplin, K.; Kreps, M.; Krokovny, P.; Krzemien, W.; Kucewicz, W.; Kucharczyk, M.; Kudryavtsev, V.; Kuonen, A. K.; Kurek, K.; Kvaratskheliya, T.; Lacarrere, D.; Lafferty, G.; Lai, A.; Lambert, D.; Lanfranchi, G.; Langenbruch, C.; Langhans, B.; Latham, T.; Lazzeroni, C.; Le Gac, R.; van Leerdam, J.; Lees, J-P; Lefevre, R.; Leflat, A.; Lefrancois, J.; Cid, E. Lemos; Leroy, O.; Lesiak, T.; Leverington, B.; Likhomanenko, T.; Liles, M.; Lindner, R.; Linn, C.; Lionetto, F.; Loh, D.; Longstaff, I.; Lopes, J. H.; Lucchesi, D.; Lucio Martinez, M.; Luo, H.; Lupato, A.; Luppi, E.; Lupton, O.; Lusiani, A.; Machefert, F.; Maciuc, F.; Maev, O.; Maguire, K.; Malde, S.; Malinin, A.; Manca, G.; Mancinelli, G.; Manning, P.; Mapelli, A.; Maratas, J.; Marchand, J. F.; Marconi, U.; Marin Benito, C.; Marino, P.; Marks, J.; Martellotti, G.; Martinelli, M.; Martinez Santos, D.; Vidal, F. Martinez; Tostes, D. Martins; Massacrier, L. M.; Massafferri, A.; Matev, R.; Mathad, A.; Mathe, Z.; Matteuzzi, C.; Mauri, A.; Maurin, B.; Mazurov, A.; McCann, M.; McCarthy, J.; McNab, A.; McNulty, R.; Meadows, B.; Meier, F.; Melnychuk, D.; Merk, M.; Michielin, E.; Milanes, D. A.; Minard, M-N.; Mitzel, D. S.; Rodriguez, J. Molina; Monroy, I. A.; Monteil, S.; Morandin, M.; Morawski, P.; Morda, A.; Morello, M. J.; Moron, J.; Morris, A. B.; Mountain, R.; Muheim, F.; Mueller, J.; Mueller, K.; Mueller, V.; Mussini, M.; Muster, B.; Naik, P.; Nakada, T.; Nandakumar, R.; Nandi, A.; Nasteva, I.; Needham, M.; Neri, N.; Neubert, S.; Neufeld, N.; Neuner, M.; Nguyen, A. D.; Nguyen-Mau, C.; Niess, V.; Niet, R.; Nikitin, N.; Nikodem, T.; Novoselov, A.; O'Hanlon, D. P.; Oblakowska-Mucha, A.; Obraztsov, V.; Ogilvy, S.; Okhrimenko, O.; Oldeman, R.; Onderwater, C. J. G.; Rodrigues, B. Osorio; Goicochea, J. M. Otalora; Otto, A.; Owen, P.; Oyanguren, A.; Palano, A.; Palombo, F.; Palutan, M.; Papanestis, A.; Pappagallo, M.; Pappalardo, L. L.; Pappenheimer, C.; Parker, W.; Parkes, C.; Passaleva, G.; Patel, G. D.; Patrignani, C.; Pearce, A.; Pellegrino, A.; Penso, G.; Altarelli, M. Pepe; Perazzini, S.; Perret, P.; Pescatore, L.; Petridis, K.; Petrolini, A.; Petruzzo, M.; Picatoste Olloqui, E.; Pietrzyk, B.; Pilai, T.; Pinci, D.; Pistone, A.; Piucci, A.; Playfer, S.; Casasus, M. Plo; Poikela, T.; Polci, F.; Poluektov, A.; Polyakov, I.; Polycarpo, E.; Popov, A.; Popov, D.; Popovici, B.; Potterat, C.; Price, E.; Price, J. D.; Prisciandaro, J.; Pritchard, A.; Prouve, C.; Pugatch, V.; Navarro, A. Puig; Punzi, G.; Qian, W.; Quagliani, R.; Rachwal, B.; Rademacker, J. H.; Rama, M.; Pernas, M. Ramos; Rangel, M. S.; Raniuk, I.; Rauschmayr, N.; Raven, G.; Redi, F.; Reichert, S.; Reid, M. M.; dos reis, A. C.; Ricciardi, S.; Richards, S.; Rihl, M.; Rinnert, K.; Molina, V. Rives; Rodrigues, A. B.; Rodrigues, E.; Lopez, J. A. Rodriguez; Perez, P. Rodriguez; Roiser, S.; Romanovsky, V.; Vidal, A. Romero; Ronayne, J. W.; Rotondo, M.; Ruf, T.; Valls, P. Ruiz; Silva, J. J. Saborido; Sagidova, N.; Sail, P.; Saitta, B.; Guimaraes, V. Salustino; Mayordomo, C. Sanchez; Sanmartin Sedes, B.; Santacesaria, R.; Santamarina Rios, C.; Santimaria, M.; Santovetti, E.; Sarti, A.; Satriano, C.; Satta, A.; Saunders, D. M.; Savrina, D.; Schael, S.; Schindler, H.; Schlupp, M.; Schmelling, M.; Schmelzer, T.; Schmidt, B.; Schneider, O.; Schopper, A.; Schubiger, M.; Schune, M-H.; Schwemmer, R.; Sciascia, B.; Sciubba, A.; Semennikov, A.; Sergi, A.; Serra, N.; Serrano, J.; Sestini, L.; Seyfert, P.; Shapkin, M.; Shapoval, I.; Shcheglov, Y.; Shears, T.; Shekhtman, L.; Shevchenko, V.; Shires, A.; Siddi, B. G.; Coutinho, R. Silva; Silva de Oliveira, L.; Simi, G.; Sirendi, M.; Skidmore, N.; Skwarnicki, T.; Smith, I. T.; Snoek, H.; Sokoloff, M. D.; Soler, F. J. P.; Soomro, F.; Souza, D.; De Paula, B. Souza; Spaan, B.; Spradlin, P.; Sridharan, S.; Stagni, F.; Stahl, M.; Stahl, S.; Stefkova, S.; Steinkamp, O.; Stenyakin, O.; Stevenson, S.; Stone, S.; Storaci, B.; Stracka, S.; Straticiuc, M.; Straumann, U.; Sutcliffe, W.; Swientek, K.; Swientek, S.; Syropoulos, V.; Szczekowski, M.; Szumlak, T.; T'Jampens, S.; Tayduganov, A.; Tekampe, T.; Teklishyn, M.; Tellarini, G.; Teubert, F.; van Tilburg, J.; Tisserand, V.; Tobin, M.; Todd, J.; Tolk, S.; Tomassetti, L.; Tonelli, D.; Topp-Joergensen, S.; Torr, N.; Tournefier, E.; Tourneur, S.; Trabelsi, K.; Tresch, M.; Trisovic, A.; Tsaregorodtsev, A.; Tsopelas, P.; Tuning, N.; Ukleja, A.; Ustyuzhanin, A.; Uwer, U.; Vacca, C.; Vagnoni, V.; Valenti, G.; Vallier, A.; Gomez, R. Vazquez; Regueiro, P. Vazquez; Sierra, C. Vazquez; Vecchi, S.; Velthuis, J. J.; Veltri, M.; Veneziano, G.; Vesterinen, M.; Viaud, B.; Vieira, D.; Vieites Diaz, M.; Vilasis-Cardona, X.; Volkov, V.; Vollhardt, A.; Volyanskyy, D.; Voong, D.; Vorobyev, A.; Vorobyev, V.; Voss, C.; Waldi, R.; Wallace, C.; Wallace, R.; Ward, D. R.; Watson, N. K.; Websdale, D.; Weiden, A.; Whitehead, M.; Wilkinson, G.; Williams, T.; Wilson, F. F.; Wimberley, J.; Wishahi, J.; Wislicki, W.; Witek, M.; Wormser, G.; Wotton, S. A.; Wraight, K.; Wright, S.; Wyllie, K.; Xie, Y.; Yang, Z.; Yu, J.; Yuan, X.; Yushchenko, O.; Zangoli, M.; Zavertyaev, M.; Zhelezov, A.; Zhokhov, A.; Zhong, L.; Zhukov, V.; Zucchelli, S.

    2016-01-01

    A search for the lepton-flavour violating decay D-0 -> e(+/-)mu(-/+) is made with a dataset corresponding to an integrated luminosity of 3.0 fb(-1) of proton-proton collisions at centre-of-mass energies of 7 TeV and 8 TeV, collected by the LHCb experiment. Candidate D-0 mesons are selected using the

  18. The EMU after the Gauweiler Judgment and the Juncker Report / Jean-Victor Louis

    Index Scriptorium Estoniae

    Louis, Jean-Victor

    2016-01-01

    Majandus- ja rahaliidu (EMU) analüüsist peale Gauweiler'i kaasuse kohtuotsuse väljakuulutamist Euroopa Kohtus ja Juncker'i aruannet. Kohtuotsuse ja Juncker'i aruande järelduste tähtsusest Majandus- ja rahaliidule tulevikus

  19. Monetary and Fiscal Policy Interaction in the EMU: A Dynamic Game Approach

    NARCIS (Netherlands)

    Aarle, B. van; Engwerda, J.; Plasmans, J.E.J.

    2002-01-01

    The interaction of monetary and fiscal policies is a crucial issue in a highly integrated economic area as the European Union. We investigate to which extent the EMU, that introduced a common monetary policy and restrictions on fiscal policy at the national level, benefits from macroeconomic policy

  20. Economic homogenization and heterogenization in the EU with the EMU - technological, sectoral and regional

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard

    1999-01-01

    Traditional the arguments for the EMU have been founded in arguments from the theory of optimal currency unions. Even if that should be the case there would still be problems if technological development are characterized by increasing returns. In that case growing economic differences according...... to sector, technology and region will be the result....

  1. Patient recall in advanced education in prosthodontics programs in the United States.

    Science.gov (United States)

    Afshari, Fatemeh S; Koslow, Alyson H; Knoernschild, Kent L; Sukotjo, Cortino

    2010-06-01

    This study surveyed program directors of Advanced Education Programs in Prosthodontics (AEPP) in the United States to determine the extent, type, incidence, and perceived effectiveness of implemented recall systems. Surveys were sent to AEPP directors across the United States to assess their program's recall protocol. This survey first identified whether an active recall program existed. For programs with recall systems, rigor in promoting ongoing oral health was surveyed by focusing on recall frequency, patient tracking protocol, involved personnel, interaction with other university departments, provided clinical procedures, and therapy completion protocol. Whether the directors perceived that their recall system was successful was also investigated. Thirty-three of 46 programs responded, giving a response rate of 72%. Of these 33 programs, only 21 (64%) had an active recall system, although 30 (91%) believed recall to be important. Twelve (57%) directors with recall programs considered their system to be effective. Prosthodontic program directors felt their program's recall effectiveness could be improved. Due to the numerous potential benefits of an active recall system, AEPPs should consider implementing or enhancing their recall programs. Further studies are indicated to determine specific criteria that describe an effective recall system for prosthodontic programs within the context of patient health promotion, program curriculum, and financial ramifications.

  2. Advancing science diplomacy: Indonesia and the US Naval Medical Research Unit.

    Science.gov (United States)

    Smith, Frank L

    2014-12-01

    Science diplomacy supposedly builds international cooperation through scientific and technical exchange. In practice, however, there are important but often overlooked instances where it might create conflict instead--as with accusations of espionage surrounding the US Naval Medical Research Unit 2 (NAMRU-2) in Indonesia. Did American science diplomacy backfire in Indonesia and, if so, why? Most literature fails to anticipate this possibility, let alone explain it, since science diplomacy is rarely subject to critical analysis. Rather than shun politics or, similarly, simply blame the demise of NAMRU-2 on the military or avian influenza, I consider both the successes and failures of this research unit in the context of Indonesia's transition to democracy and America's legacy from the Cold War. Based on this history, I propose that the effects of science diplomacy depend on strategic communication and exchange, as well as elite influence and material incentives. Therefore, by challenging the conventional wisdom about science diplomacy, NAMRU-2 can help advance the theory and practice of this potentially useful tool of statecraft.

  3. 动车组电空制动协调控制优化研究%Research on Optimization of Electro-pneumatic Braking Cooperative Control for EMU

    Institute of Scientific and Technical Information of China (English)

    朱琴跃; 包世炯; 谭喜堂; 王东响

    2013-01-01

    分析现有动车组电空制动控制系统中的制动力分配策略,针对动车与拖车电空制动力施加不均的问题,提出一种电空制动协调控制优化策略。采用动车电制动优先的控制原则,并根据载重反比分配拖车与动车所需施加的空气制动力。以 CRH2型动车组中一动一拖为基本单元,利用Matlab/Simulink软件对列车在不同制动工况进行仿真,结果表明,基于载重反比分配制动力的电空制动协调优化控制策略可有效提高列车制动效率,减小动车与拖车的车轮踏面磨损。%On analysis of the braking force distribution strategy in existing Electric Multiple Unit(EMU) electro-pneumatic braking control system, an optimization strategy of electro-pneumatic braking cooperative control is proposed, which aims at solving the imbalance problem of the motor car and trailer car’s electro-pneumatic braking. It uses electro-pneumatic braking priority control principle in EMU, and distributes air braking force of motor car and trailer car in inverse ratio on the basic of load. By modeling the EMU electro-pneumatic cooperative braking control and braking force distribution optimized algorithm while taking one motor car and one trailer car in CRH2 EMU as the basic unit, the Matlab/Simulink software is used to simulate different braking condition. The results indicate that the electro-pneumatic cooperative braking control optimization strategy which based on the load inverse-proportion for braking force distribution has the significant effect on improving brake efficiency, reducing wheel tread wear of the motor car and the trailer car.

  4. Emu Oil Combined with Lyprinol™ Reduces Small Intestinal Damage in a Rat Model of Chemotherapy-Induced Mucositis.

    Science.gov (United States)

    Mashtoub, Suzanne; Lampton, Lorrinne S; Eden, Georgina L; Cheah, Ker Y; Lymn, Kerry A; Bajic, Juliana E; Howarth, Gordon S

    2016-10-01

    Chemotherapy-induced mucositis is characterized by inflammation and ulcerating lesions lining the alimentary tract. Emu Oil and Lyprinol™ have independently demonstrated their therapeutic potential in intestinal inflammatory disorders, including mucositis. We investigated Emu Oil and Lyprinol™ in combination for their further potential to alleviate chemotherapy-induced mucositis in rats. Rats were gavaged with (1 ml) water, Olive Oil, Emu Oil + Olive Oil, Lyprinol™ + Olive Oil or Emu Oil + Lyprinol™ from Days 0 to 7, injected with saline (control) or 5-Fluorouracil (5-FU) on Day 5 and euthanized on Day 8. Myeloperoxidase (MPO) activity (indicative of acute inflammation), histological severity scores, and intestinal architecture were quantified. Myeloperoxidase activity was significantly increased in the jejunum and ileum following 5-FU, compared to saline controls. Both Olive Oil and Emu Oil + Lyprinol™ significantly reduced jejunal MPO levels (1.8-fold and 1.7-fold, respectively), whereas only Emu Oil + Lyprinol™ significantly decreased ileal MPO levels, relative to 5-FU controls. All oil treatments decreased histological severity scores in the jejunum and ileum, and normalized crypt depth in the mid small intestine, relative to 5-FU controls. Emu Oil combined with Lyprinol™ partially reduced acute small intestinal inflammation. Isolating bioactive constituents of these naturally sourced oils could provide a more targeted strategy to protect against intestinal mucositis.

  5. Impact of individualized learning plans on United States senior medical students advanced clinical rotations

    Directory of Open Access Journals (Sweden)

    Amalia Guardiola

    2016-11-01

    Full Text Available The individualized learning plan (ILP is a tool that promotes self-directed learning. The aim of this pilot study was to look at the perception of the ILPs in United States senior medical school students as a way to improve their learning experience during their advanced practice clerkship. We conducted a survey of graduating medical students that contained both quantitative and open-ended questions regarding the students’ experiences with the ILP during their advanced practice clerkship from July 2014 to March 2016. We systematically identified and compiled themes among the qualitative responses. Responses from 294 out of 460 subjects were included for analysis (63.9%. Ninety students (30.6% reported that the ILP was definitely reviewed at the midpoint and 88 (29.9% at the final evaluation. One hundred sixty one students (54.8% felt the ILP provided a framework for learning. One hundred sixty one students (61.6% felt it was a useful tool in helping open a discussion between the student and faculty. The qualitative data was grouped by areas most mentioned and these areas of concern centered on lack of faculty knowledge about ILP, time to complete ILP, and uncertainty of appropriate goal setting. The majority of students perceive the ILP to be helpful. Our results suggest that active intervention is needed by dedicated and trained faculty to improve ILP utilization. It is recommended that faculty gives students examples of learning goals to create their own learning framework and encourages them to discuss and review the ILP.

  6. Cyclone Boiler Field Testing of Advanced Layered NOx Control Technology in Sioux Unit 1

    Energy Technology Data Exchange (ETDEWEB)

    Marc A. Cremer; Bradley R. Adams

    2006-06-30

    A four week testing program was completed during this project to assess the ability of the combination of deep staging, Rich Reagent Injection (RRI), and Selective Non-Catalytic Reduction (SNCR) to reduce NOx emissions below 0.15 lb/MBtu in a cyclone fired boiler. The host site for the tests was AmerenUE's Sioux Unit 1, a 500 MW cyclone fired boiler located near St. Louis, MO. Reaction Engineering International (REI) led the project team including AmerenUE, FuelTech Inc., and the Electric Power Research Institute (EPRI). This layered approach to NOx reduction is termed the Advanced Layered Technology Approach (ALTA). Installed RRI and SNCR port locations were guided by computational fluid dynamics (CFD) based modeling conducted by REI. During the parametric testing, NOx emissions of 0.12 lb/MBtu were achieved consistently from overfire air (OFA)-only baseline NOx emissions of 0.25 lb/MBtu or less, when firing the typical 80/20 fuel blend of Powder River Basin (PRB) and Illinois No.6 coals. From OFA-only baseline levels of 0.20 lb/MBtu, NOx emissions of 0.12 lb/MBtu were also achieved, but at significantly reduced urea flow rates. Under the deeply staged conditions that were tested, RRI performance was observed to degrade as higher blends of Illinois No.6 were used. NOx emissions achieved with ALTA while firing a 60/40 blend were approximately 0.15 lb/MBtu. NOx emissions while firing 100% Illinois No.6 were approximately 0.165 lb/MBtu. Based on the performance results of these tests, economics analyses of the application of ALTA to a nominal 500 MW cyclone unit show that the levelized cost to achieve 0.15 lb/MBtu is well below 75% of the cost of a state of the art SCR.

  7. Energy Savings and Economics of Advanced Control Strategies for Packaged Air-Conditioning Units with Gas Heat

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Weimin; Katipamula, Srinivas; Huang, Yunzhi; Brambley, Michael R.

    2011-12-31

    Pacific Northwest National Laboratory (PNNL) with funding from the U.S. Department of Energy's Building Technologies Program (BTP) evaluated a number of control strategies that can be implemented in a controller, to improve the operational efficiency of the packaged air conditioning units. The two primary objectives of this research project are: (1) determine the magnitude of energy savings achievable by retrofitting existing packaged air conditioning units with advanced control strategies not ordinarily used for packaged units and (2) estimating what the installed cost of a replacement control with the desired features should be in various regions of the U.S. This document reports results of the study.

  8. Nature as capital: Advancing and incorporating ecosystem services in United States federal policies and programs.

    Science.gov (United States)

    Schaefer, Mark; Goldman, Erica; Bartuska, Ann M; Sutton-Grier, Ariana; Lubchenco, Jane

    2015-06-16

    The concept of nature as capital is gaining visibility in policies and practices in both the public and private sectors. This change is due to an improved ability to assess and value ecosystem services, as well as to a growing recognition of the potential of an ecosystem services approach to make tradeoffs in decision making more transparent, inform efficient use of resources, enhance resilience and sustainability, and avoid unintended negative consequences of policy actions. Globally, governments, financial institutions, and corporations have begun to incorporate natural capital accounting in their policies and practices. In the United States, universities, nongovernmental organizations, and federal agencies are actively collaborating to develop and apply ecosystem services concepts to further national environmental and economic objectives. Numerous federal agencies have begun incorporating these concepts into land use planning, water resources management, and preparations for, and responses to, climate change. Going forward, well-defined policy direction will be necessary to institutionalize ecosystem services approaches in federal agencies, as well as to guide intersector and interdisciplinary collaborative research and development efforts. In addition, a new generation of decision support tools are needed to further the practical application of ecosystem services principles in policymaking and commercial activities. Improved performance metrics are needed, as are mechanisms to monitor the status of ecosystem services and assess the environmental and economic impacts of policies and programs. A greater national and international financial commitment to advancing ecosystem services and natural capital accounting would likely have broad, long-term economic and environmental benefits.

  9. Radiological Shielding Design for the Neutron High-Resolution Backscattering Spectrometer EMU at the OPAL Reactor

    Science.gov (United States)

    Ersez, Tunay; Esposto, Fernando; Souza, Nicolas R. de

    2017-09-01

    The shielding for the neutron high-resolution backscattering spectrometer (EMU) located at the OPAL reactor (ANSTO) was designed using the Monte Carlo code MCNP 5-1.60. The proposed shielding design has produced compact shielding assemblies, such as the neutron pre-monochromator bunker with sliding cylindrical block shields to accommodate a range of neutron take-off angles, and in the experimental area - shielding of neutron focusing guides, choppers, flight tube, backscattering monochromator, and additional shielding elements inside the Scattering Tank. These shielding assemblies meet safety and engineering requirements and cost constraints. The neutron dose rates around the EMU instrument were reduced to < 0.5 µSv/h and the gamma dose rates to a safe working level of ≤ 3 µSv/h.

  10. Use of Aquaporins to Achieve Needed Water Purity On ISS for the EMU Space Suit System

    Science.gov (United States)

    Hill, Terry R.; Taylor, Brandon W.

    2011-01-01

    With the U.S. Space Shuttle fleet retired, the supply of extremely high-quality water 'super-Q' - required for the EMU Space suit cooling on this ISS - will become a significant operational hardware challenge in the very near future. A proposed potential solution is the use of a filtration system consisting of a semi-permeable membrane embedded with aquaporin proteins. Aquaporins are a special class of trans-membrane proteins that facilitate passive transport of water and other substances across a membrane. The specificity of these proteins is such that only water is allowed through the protein structure, and this novel property invites their adaptation for use in water filtration systems, specifically usage on the ISS for the EMU space suit system. These proteins are found in many living systems and have been developed for commercial use today.

  11. 'EMU equity markets' return variance and spill over effects from short-term interest rates

    DEFF Research Database (Denmark)

    Hou, Ai Jun

    2013-01-01

    ), stock returns have a negative relationship with the volatility, and the volatility process responds asymmetrically to shocks to equity returns, especially to bad news. The other regime (a bull market regime) appears to be a high mean, low variance state, within which the returns have a positive...... relationship with the volatility, and the volatility is lower and more persistent. We find also that there is a significant impact of fluctuations in the short term interest rate on the conditional variance and conditional returns in the EMU countries. Such impact is asymmetrical, and it appears to be stronger...... in the bear market and when the interest rate changes upward. The results are of importance to EMU monetary policy makers stabilizing the inflation and output through the interest rate, and to financial market participants making effective investment decisions and formulating appropriate risk management...

  12. Thermal Performance Testing of EMU and OSS Liquid Cooling Garments

    Science.gov (United States)

    Rhodes, Richard; Bue, Grant; Hakam, Mary

    2012-01-01

    A test was conducted to evaluate three factors influencing the thermal performance of liquid cooling garments (LCG): (1) the comparable thermal performance of an Oceaneering developed engineering evaluation unit (EEU) prototype LDG, (2) the effect of the thermal comfort undergarment (TCU), and (3) the performance of a torso or upper body only LCG configuration. To evaluate the thermal performance of each configuration a metabolic test was conducted, utilizing suited subjects to generate the metabolic heat. For this study three (3) test subjects of similar health and weight produced a metabolic load on the LDG configuration by either resting (300-600 BTU/hr), walking at a slow pace (1200 BRU/hr), and walking at a brisk pace (2200 BTU/hr), as outlined in Figure 1, the metabolic profile. During the test, oxygen consumption, heart rate, relative humidity, air flow, inlet and outlet air pressure, inlet and outlet air temperature, delta air temperature, water flow (100 lb/hr), inlet water temperature (64 F), delta water temperature, water pressure, core body temperature, skin temperature, and sweat loss data was recorded. Four different test configurations were tested, with one configuration tested twice, as outlined in Table 1. The test was conducted with the suit subjects wearing the Demonstrator Suit, pressurized to vent pressure (approximately 0.5 psig). The demonstrator suit has an integrated ventilation duct system and was used to create a relevant environment with a captured ventilation return, an integrated vent tree, and thermal insulation from the environment.

  13. Homemade 350 km/h "Hexie" EMU Rolls off Production Line

    Institute of Scientific and Technical Information of China (English)

    Liu Dalei

    2008-01-01

    @@ On April 11,2008,domestically manufactured 350 km/h CRH3 "Hexie" EMU rolled off the production line in CNR Tangshan Railway Vehicle Co.,Lte,which indicated great achievements made in the modernization of CR's technical equipment,and meant China stepping into one of the several countries being able to manufacture the moving equipment for 350 km/h high-speed railways.

  14. EMU – “Optimum” or “Viable” Currency Area?

    OpenAIRE

    Andreea Bucur

    2012-01-01

    Although the increasing heterogeneity as an effect of European Union enlargement, referring especially to the last two waves, is perceived as a single internal market and also euro single currency risk, European Monetary Union represents an important step towards deepening economic integration. Controversy on the Optimum Currency Area issue has created difficulties in empirical research effort to find appropriate responses to the EMU dilemma: is Euro zone an „optimum” or rather “viable” curre...

  15. Competitiveness channel in Poland and Slovakia: a pre-EMU DSGE analysis

    OpenAIRE

    Andrzej Toroj

    2011-01-01

    Once a country joins a monetary union, an efficient competitiveness channel is considered to be the main substitute for the abandoned autonomous monetary and exchange rate policy. This paper attempts to make an empirical assessment of how the price competitiveness of domestic producers stabilizes the Polish and Slovak economies against the background of potentially procyclical real interest rates in EMU. To address this issue, we use a small open economy DSGE model. We compare the FIML estima...

  16. A New Leanchoiliid Megacheiran Arthropod from the Lower Cambrian Emu Bay Shale, South Australia

    OpenAIRE

    Edgecombe, Gregory D; Diego C. García-Bellido; Paterson, John R

    2011-01-01

    The Leanchoiliidae is well-known from abundant material of Leanchoilia, from the Burgess Shale and Chengjiang Konservat-Lagerstätten. The first Australian member of the group is Oestokerkus megacholix gen. et sp. nov., described from the Emu Bay Shale (Cambrian Series 2, Stage 4), at Buck Quarry, Kangaroo Island, South Australia, and is intermediate in age between the well known leanchoiliid species from the Burgess Shale and Chengjiang. Phylogenetic analysis of “short great appendage” arthro...

  17. Will we pay the same way? Empirical evidence of payment behaviours convergence on EMU panel data

    OpenAIRE

    Deungoue, Sandra

    2005-01-01

    Working Paper du GATE 2005-01; The purpose of this study is to analyze the observed changes in payment behaviours by underlining the influence of factors such as financial opening, regulations and technological innovation. We show how forces acting in order to mould the national retail banking markets into a Single Payment Area (SPA) within the European Monetary Union (EMU) have impacted the payment instruments demand. We analyse the integration process and measure the importance of its major...

  18. Modal Analysis of the EMU Car-Body in the Preparation Condition Based on Mass Fineness Distribution

    Science.gov (United States)

    Li, Ya-Na; Rao, Ben-Teng; Xie, Su-Ming; Ma, Si-Qun

    Analyzing the car-body modal of EMU is the key of assessing EMU dynamic quality at high speed. The car-body modal can be influenced to same degree by the mass fineness distribution and the rationality of coupling stiffness of suspension device. Considering all equipments layout including internal decoration, FEM of the EMU car-body under preparation based on mass fineness distribution was created and the free modal was carried out with FEA software. The vertical bend frequency 10.03Hz, that is closer to the experimental data, satisfies the relative requirement. And on this basis, different vibration frequencies were studied under different elastic hanging stiffness of suspension device. Vibration frequency change is same on three direction with vertical direction stiffness, which indicate vertical stiffness is more important than the other direction stiffness. Thus these results provide some rational references for EMU car-body structural design.

  19. The endogeneity of the optimum currency area criteria, intra-industry trade, and EMU enlargement / Jarko Fidrmuc

    Index Scriptorium Estoniae

    Fidrmuc, Jarko

    2004-01-01

    Uurimus käsitleb optimaalse valuutapiirkonna, tööstusharusisese kaubavahetuse ja OECD riikide sh Eesti majandustsüklite seoseid 1990-ndate aastate andmete põhjal. EMU laienemise mõjud majandustsüklitele. Tabelid

  20. The endogeneity of the optimum currency area criteria, intra-industry trade, and EMU enlargement / Jarko Fidrmuc

    Index Scriptorium Estoniae

    Fidrmuc, Jarko

    2004-01-01

    Uurimus käsitleb optimaalse valuutapiirkonna, tööstusharusisese kaubavahetuse ja OECD riikide sh Eesti majandustsüklite seoseid 1990-ndate aastate andmete põhjal. EMU laienemise mõjud majandustsüklitele. Tabelid

  1. United by Goals: There Is No Integrated Advancement without Communications and Marketing

    Science.gov (United States)

    DiConsiglio, John

    2011-01-01

    The idea behind integrated advancement is simple and dates back to the 1990s: A strong relationship between advancement offices conserves resources. It leads to a more efficient workforce. It portrays a highly unified message to stakeholders, including donors, alumni, local officials, and opinion leaders. In short, the entire advancement team…

  2. United by Goals: There Is No Integrated Advancement without Communications and Marketing

    Science.gov (United States)

    DiConsiglio, John

    2011-01-01

    The idea behind integrated advancement is simple and dates back to the 1990s: A strong relationship between advancement offices conserves resources. It leads to a more efficient workforce. It portrays a highly unified message to stakeholders, including donors, alumni, local officials, and opinion leaders. In short, the entire advancement team…

  3. Development of Proof-of-Concept Units for the Advanced Medium-Sized Mobile Power Sources (AMMPS) Program

    Energy Technology Data Exchange (ETDEWEB)

    Andriulli, JB

    2002-04-03

    The purpose of this report is to document the development of the proof-of-concept units within the Advanced Medium-sized Mobile Power Sources (AMMPS) program. The design used a small, lightweight diesel engine, a permanent magnet alternator, power electronics and digital controls as outlined in the philosophy detailed previously. One small proof-of-concept unit was completed and delivered to the military. The unit functioned well but was not optimized at the time of delivery to the military. A tremendous amount of experience was gained during this phase that can be used in the development of any follow-on AMMPS production systems. Lessons learned and recommendations for follow-on specifications are provided. The unit demonstrated that significant benefits are possible with the new design philosophy. Trade-offs will have to be made but many of the advantages appear to be within the technical grasp of the market.

  4. Advances in regional crop yield estimation over the United States using satellite remote sensing data

    Science.gov (United States)

    Johnson, D. M.; Dorn, M. F.; Crawford, C.

    2015-12-01

    Since the dawn of earth observation imagery, particularly from systems like Landsat and the Advanced Very High Resolution Radiometer, there has been an overarching desire to regionally estimate crop production remotely. Research efforts integrating space-based imagery into yield models to achieve this need have indeed paralleled these systems through the years, yet development of a truly useful crop production monitoring system has been arguably mediocre in coming. As a result, relatively few organizations have yet to operationalize the concept, and this is most acute in regions of the globe where there are not even alternative sources of crop production data being collected. However, the National Agricultural Statistics Service (NASS) has continued to push for this type of data source as a means to complement its long-standing, traditional crop production survey efforts which are financially costly to the government and create undue respondent burden on farmers. Corn and soybeans, the two largest field crops in the United States, have been the focus of satellite-based production monitoring by NASS for the past decade. Data from the Moderate Resolution Imaging Spectroradiometer (MODIS) has been seen as the most pragmatic input source for modeling yields primarily based on its daily revisit capabilities and reasonable ground sample resolution. The research methods presented here will be broad but provides a summary of what is useful and adoptable with satellite imagery in terms of crop yield estimation. Corn and soybeans will be of particular focus but other major staple crops like wheat and rice will also be presented. NASS will demonstrate that while MODIS provides a slew of vegetation related products, the traditional normalized difference vegetation index (NDVI) is still ideal. Results using land surface temperature products, also generated from MODIS, will also be shown. Beyond the MODIS data itself, NASS research has also focused efforts on understanding a

  5. Emu8086与汇编语言教学整合的实践探索%Practice and Exploration of Integration of Emu8086 and Assembly Language Education

    Institute of Scientific and Technical Information of China (English)

    陈军; 王琰; 苟双全; 李文娟; 冯月华

    2014-01-01

    Emu8086是基于8086CPU的仿真软件,可以作为教与学的工具以及课程内容与汇编语言课程教学进行整合。在充分考虑Emu8086和汇编语言本身的特点基础上,将其与汇编语言教学的方法、教学设计有机整合,激发了学生的学习兴趣,促进学生有效地学习,培养学生的自主学习能力,改善教与学的方式,提高了教学效益。%Emu8086 is the simulation software based on 8086 CPU,and integrated assembly language course teaching, being used as a tool of teaching and learning and course content . The paper studies that fully considering Emu8086 and the characteristics of assembly language itself, teaching methods , teaching design of the organic in-tegration of the Emu8086 and assembly language, stimulating the students' interest in learning, promoting students to learn effectively, cultivating students' autonomous learning ability, developing teaching and learning, improving the teaching efficiency.

  6. Morphology of the tongue of the emu (Dromaius novaehollandiae). II. Histological features.

    Science.gov (United States)

    Crole, M R; Soley, J T

    2009-12-01

    Although a number of brief, fragmented descriptions have been provided on the gross morphology of the ratite tongue, very few studies have documented the histological structure of this organ. This paper presents the first definitive histological description of the emu tongue and reviews, consolidates and compares the scattered information on the histology of the ratite tongue available in the literature. Five tongues were removed from heads obtained from birds at slaughter and fixed in 10% neutral buffered formalin. Appropriate longitudinal and transverse segments were removed, routinely processed for light microscopy, and sections examined after staining with H & E and PAS. The entire tongue (body and root) is invested by a non-keratinized stratified squamous epithelium. The supporting connective tissue of the tongue dorsum displays only large, simple branched tubular mucus-secreting glands, whereas the caudal tongue body ventrum and tongue root, in addition to these glands, also exhibits small, simple tubular mucus-secreting glands. Herbst corpuscles are associated with the large, simple branched glands. Lymphoid tissue is restricted to the tongue ventrum and is particularly obvious at the junction of the ventral tongue body and frenulum where a large aggregation of diffuse lymphoid tissue, with nodular tissue proximally, was consistently observed. A structure resembling a taste bud was located in the epithelium on the caudal extremity of the tongue root of one bird. This is the first reported observation of taste buds in ratites. Forming the core of the tongue body is the cartilaginous paraglossum lying dorsal to the partially ossified rostral projection of the basihyale. The histological features of the emu tongue are generally similar to those described for the greater rhea and ostrich, except that taste buds were not identified in these species. The results would suggest that the emu tongue functions as a sensory organ, both for taste and touch (by virtue of

  7. Morphology of the tongue of the emu (Dromaius novaehollandiae. II. Histological features

    Directory of Open Access Journals (Sweden)

    M.R. Crole

    2009-09-01

    Full Text Available Although a number of brief, fragmented descriptions have been provided on the gross morphology of the ratite tongue, very few studies have documented the histological structure of this organ. This paper presents the first definitive histological description of the emu tongue and reviews, consolidates and compares the scattered information on the histology of the ratite tongue available in the literature. Five tongues were removed from heads obtained from birds at slaughter and fixed in 10 % neutral buffered formalin. Appropriate longitudinal and transverse segments were removed, routinely processed for light microscopy, and sections examined after staining with H & E and PAS. The entire tongue (body and root is invested by a non-keratinized stratified squamous epithelium. The supporting connective tissue of the tongue dorsum displays only large, simple branched tubular mucussecreting glands, whereas the caudal tongue body ventrum and tongue root, in addition to these glands, also exhibits small, simple tubular mucus-secreting glands. Herbst corpuscles are associated with the large, simple branched glands. Lymphoid tissue is restricted to the tongue ventrum and is particularly obvious at the junction of the ventral tongue body and frenulum where a large aggregation of diffuse lymphoid tissue, with nodular tissue proximally, was consistently observed. A structure resembling a taste bud was located in the epithelium on the caudal extremity of the tongue root of one bird. This is the first reported observation of taste buds in ratites. Forming the core of the tongue body is the cartilaginous paraglossum lying dorsal to the partially ossified rostral projection of the basihyale. The histological features of the emu tongue are generally similar to those described for the greater rhea and ostrich, except that taste buds were not identified in these species. The results would suggest that the emu tongue functions as a sensory organ, both for taste and

  8. EMuRgency: Addressing cardiac arrest with socio-technical innovation in a smart learning region

    Directory of Open Access Journals (Sweden)

    Sabina Jeschke

    2013-08-01

    Full Text Available This paper introduces the EMuRgency project. The project has the goal to increase awareness and competences regarding the problem of cardiac arrest in the Euregio Meuse-Rhine (EMR and to use socio-technical innovations to transfer it into a smart learning region. Based on the conscious competence framework solutions for stakeholders on different levels of the framework are introduced, namely a public display network, mobile learning apps and a volunteer notification system. Finally, a future research outlook is given.

  9. Structural strength analysis and fatigue life prediction of traction converter box in high-speed EMU

    Science.gov (United States)

    Tan, Qin; Li, Qiang

    2017-01-01

    The method of building the FEA model of traction converter box in high-speed EMU and analyzing the static strength and fatigue strength of traction converter box based on IEC 61373-2010 and EN 12663 standards is presented in this paper. The load-stress correlation coefficients of weak points is obtained by FEA model, applied to transfer the load history of traction converter box to stress history of each point. The fatigue damage is calculated based on Miner's rule and the fatigue life of traction converter box is predicted. According to study, the structural strength of traction converter box meets design requirements.

  10. What central banks have learned: lessons from pre-EMU Europe

    Directory of Open Access Journals (Sweden)

    Aerdt C.F.J. Houben

    2001-09-01

    Full Text Available This paper examines the intentions and outturns of central bank policies in Europefrom the collapse of the Bretton Woods system of fixed exchange rates until the start ofEMU in 1999. It focuses on the lessons that can be drawn from the three dominant policy strategies of money targeting, exchange rate targeting and inflation targeting. Several of the lessons that are relevant to the euro area are shown to have been incorporated into the monetary policy strategy of the European Central Bank.

  11. Search for the Lepton Flavor Violation Process $J/\\psi \\to e\\mu$ at BESIII

    CERN Document Server

    Ablikim, M; Albayrak, O; Ambrose, D J; An, F F; An, Q; Bai, J Z; Ferroli, R Baldini; Ban, Y; Becker, J; Bennett, J V; Bertani, M; Bian, J M; Boger, E; Bondarenko, O; Boyko, I; Briere, R A; Bytev, V; Cai, H; Cai, X; akir, O; Calcaterra, A; Cao, G F; Cetin, S A; Chang, J F; Chelkov, G; Chen, G; Chen, H S; Chen, J C; Chen, M L; Chen, S J; Chen, X; Chen, Y B; Cheng, H P; Chu, Y P; Cronin-Hennessy, D; Dai, H L; Dai, J P; Dedovich, D; Deng, Z Y; Denig, A; Denysenko, I; Destefanis, M; Ding, W M; Ding, Y; Dong, L Y; Dong, M Y; Du, S X; Fang, J; Fang, S S; Fava, L; Feng, C Q; Friedel, P; Fu, C D; Fu, J L; Gao, Y; Geng, C; Goetzen, K; Gong, W X; Gradl, W; Greco, M; Gu, M H; Gu, Y T; Guan, Y H; Guo, A Q; Guo, L B; Guo, T; Guo, Y P; Han, Y L; Harris, F A; He, K L; He, M; He, Z Y; Held, T; Heng, Y K; Hou, Z L; Hu, C; Hu, H M; Hu, J F; Hu, T; Huang, G M; Huang, G S; Huang, J S; Huang, L; Huang, X T; Huang, Y; Huang, Y P; Hussain, T; Ji, C S; Ji, Q; Ji, Q P; Ji, X B; Ji, X L; Jiang, L L; Jiang, X S; Jiao, J B; Jiao, Z; Jin, D P; Jin, S; Jing, F F; Kalantar-Nayestanaki, N; Kavatsyuk, M; Kopf, B; Kornicer, M; Kuehn, W; Lai, W; Lange, J S; Larin, P; Leyhe, M; Li, C H; Li, Cheng; Li, Cui; Li, D M; Li, F; Li, G; Li, H B; Li, J C; Li, K; Li, Lei; Li, Q J; Li, S L; Li, W D; Li, W G; Li, X L; Li, X N; Li, X Q; Li, X R; Li, Z B; Liang, H; Liang, Y F; Liang, Y T; Liao, G R; Liao, X T; Lin, D; Liu, B J; Liu, C L; Liu, C X; Liu, F H; Liu, Fang; Liu, Feng; Liu, H; Liu, H B; Liu, H H; Liu, H M; Liu, H W; Liu, J P; Liu, K; Liu, K Y; Liu, Kai; Liu, P L; Liu, Q; Liu, S B; Liu, X; Liu, Y B; Liu, Z A; Liu, Zhiqiang; Liu, Zhiqing; Loehner, H; Lu, G R; Lu, H J; Lu, J G; Lu, Q W; Lu, X R; Lu, Y P; Luo, C L; Luo, M X; Luo, T; Luo, X L; Lv, M; Ma, C L; Ma, F C; Ma, H L; Ma, Q M; Ma, S; Ma, T; Ma, X Y; Maas, F E; Maggiora, M; Malik, Q A; Mao, Y J; Mao, Z P; Messchendorp, J G; Min, J; Min, T J; Mitchell, R E; Mo, X H; Moeini, H; Morales, C Morales; Moriya, K; Muchnoi, N Yu; Muramatsu, H; Nefedov, Y; Nicholson, C; Nikolaev, I B; Ning, Z; Olsen, S L; Ouyang, Q; Pacetti, S; Park, J W; Pelizaeus, M; Peng, H P; Peters, K; Ping, J L; Ping, R G; Poling, R; Prencipe, E; Qi, M; Qian, S; Qiao, C F; Qin, L Q; Qin, X S; Qin, Y; Qin, Z H; Qiu, J F; Rashid, K H; Rong, G; Ruan, X D; Sarantsev, A; Schaefer, B D; Shao, M; Shen, C P; Shen, X Y; Sheng, H Y; Shepherd, M R; Song, W M; Song, X Y; Spataro, S; Spruck, B; Sun, D H; Sun, G X; Sun, J F; Sun, S S; Sun, Y J; Sun, Y Z; Sun, Z J; Sun, Z T; Tang, C J; Tang, X; Tapan, I; Thorndike, E H; Toth, D; Ullrich, M; Uman, I; Varner, G S; Wang, B Q; Wang, D; Wang, D Y; Wang, K; Wang, L L; Wang, L S; Wang, M; Wang, P; Wang, P L; Wang, Q J; Wang, S G; Wang, X F; Wang, X L; Wang, Y D; Wang, Y F; Wang, Y Q; Wang, Z; Wang, Z G; Wang, Z Y; Wei, D H; Wei, J B; Weidenkaff, P; Wen, Q G; Wen, S P; Werner, M; Wiedner, U; Wu, L H; Wu, N; Wu, S X; Wu, W; Wu, Z; Xia, L G; Xia, Y X; Xiao, Z J; Xie, Y G; Xiu, Q L; Xu, G F; Xu, G M; Xu, Q J; Xu, Q N; Xu, X P; Xu, Z R; Xue, F; Xue, Z; Yan, L; Yan, W B; Yan, Y H; Yang, H X; Yang, Y; Yang, Y X; Ye, H; Ye, M; Ye, M H; Yu, B X; Yu, C X; Yu, H W; Yu, J S; Yu, S P; Yuan, C Z; Yuan, Y; Zafar, A A; Zallo, A; Zang, S L; Zeng, Y; Zhang, B X; Zhang, B Y; Zhang, C; Zhang, C C; Zhang, D H; Zhang, H H; Zhang, H Y; Zhang, J Q; Zhang, J W; Zhang, J Y; Zhang, J Z; Zhang, LiLi; Zhang, R; Zhang, S H; Zhang, X J; Zhang, X Y; Zhang, Y; Zhang, Y H; Zhang, Z P; Zhang, Z Y; Zhang, Zhenghao; Zhao, G; Zhao, H S; Zhao, J W; Zhao, K X; Zhao, Lei; Zhao, Ling; Zhao, M G; Zhao, Q; Zhao, S J; Zhao, T C; Zhao, X H; Zhao, Y B; Zhao, Z G; Zhemchugov, A; Zheng, B; Zheng, J P; Zheng, Y H; Zhong, B; Zhou, L; Zhou, X; Zhou, X K; Zhou, X R; Zhu, C; Zhu, K; Zhu, K J; Zhu, S H; Zhu, X L; Zhu, Y C; Zhu, Y M; Zhu, Y S; Zhu, Z A; Zhuang, J; Zou, B S; Zou, J H

    2013-01-01

    We search for the lepton-flavor-violating decay of the $J/\\psi$ into an electron and a muon using $(225.3\\pm2.8)\\times 10^{6}$ $J/\\psi$ events collected with the BESIII detector at the BEPCII collider. Four candidate events are found in the signal region, consistent with background expectations. An upper limit on the branching fraction of $\\mathcal{B}(J/\\psi \\to e\\mu)< 1.5 \\times 10^{-7}$ (90% C.L.) is obtained.

  12. Technology Advancement in Support of NASAs Evolutionary Xenon Thruster (NEXT) System Power Processing Unit Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of this IRAD is to advance the TRL of the PPU to 6.  This includes supporting GRC with requirements review and validation, design updates and...

  13. Glacier advances at the Pleistocene/Holocene transition near Mount Rainier volcano, Cascade Range, United States

    Science.gov (United States)

    Heine, Jan Tillmann

    Glaciers in the vicinity of Mount Rainier advanced twice during late glacial/early Holocene time. Radiocarbon dates obtained from lake sediments adjacent to the corresponding moraines are concordant, indicting that the ages for the advances are closely limiting. The first advance occurred before 11,300 14C yr. BP (l3,200 cal yr BP). During the North Atlantic Younger-Dryas event, between 11,000 and 10,000 14C yr BP (12,900 and 11,600 cal yr BP), glaciers retreated on Mount Rainier, probably due to a lack of available moisture, but conditions may have remained cold. The onset of warmer conditions on Mount Rainier occurred around 10,000 14C yr BP (11,600 cal yr BP). Organic sedimentation lasted for at least 700 years before glaciers readvanced between 9800 and 8950 14C yr BP (10,900 and 9950 cal yr BP). Glaciers seem to have advanced in response to regional or local shifts in late- glacial climate. No evidence for a glacier advance during Younger Dryas time has been found. However. the Younger Dryas climatic reversal may have affected the Mount Rainier area, causing a cold, but dry, climate unfavorable to glacier advances.

  14. Advanced Optical Inertial Reference Unit with 100 Nanoradian Stability, Two-axis

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    ATA Sensors and Systems produces precision angular rate sensors, state-of-the-art optical inertial reference units, fast steering mirrors, inertial measurement u-nits, actuators and controls used in long-range optical systems and laser communications and space qualified subsystems for satellite imaging and inertial guidance.

  15. Soil Conservation Unit for the Advanced Crop Production and Marketing Course. Instructor's Guide. AGDEX 570.

    Science.gov (United States)

    Stewart, Bob R.; And Others

    This instructor's guide contains eight lesson plans for teaching soil conservation in accordance with the Missouri State Board of Education's Vocational Instructional Management System. To make the unit easier for teachers to use, the following materials are provided in the front of the unit: objectives and competencies for each lesson, a…

  16. Consciousness levels one week after admission to a palliative care unit improve survival prediction in advanced cancer patients.

    Science.gov (United States)

    Tsai, Jaw-Shiun; Chen, Chao-Hsien; Wu, Chih-Hsun; Chiu, Tai-Yuan; Morita, Tatsuya; Chang, Chin-Hao; Hung, Shou-Hung; Lee, Ya-Ping; Chen, Ching-Yu

    2015-02-01

    Consciousness is an important factor of survival prediction in advanced cancer patients. However, effects on survival of changes over time in consciousness in advanced cancer patients have not been fully explored. This study evaluated changes in consciousness after admission to a palliative care unit and their correlation with prognosis in terminal cancer patients. This is a prospective observational study. From a palliative care unit in Taiwan, 531 cancer patients (51.8% male) were recruited. Consciousness status was assessed at admission and one week afterwards and recorded as normal or impaired. The mean age was 65.28±13.59 years, and the average survival time was 23.41±37.69 days. Patients with normal consciousness at admission (n=317) had better survival than those with impaired consciousness at admission (n=214): (17.0 days versus 6.0 days, pconsciousness at admission had a higher percentage of survival than the impaired (78.9% versus 44.3%, pconsciousness levels: (1) normal at admission and one week afterwards, (2) impaired at admission but normal one week afterwards, (3) normal at admission but impaired one week afterwards, and (4) impaired both at admission and one week afterwards. The former two groups had significantly better survival than the latter two groups: (median survival counted from day 7 after admission), 25.5, 27.0, 7.0, and 7.0 days, respectively. Consciousness levels one week after admission should be integrated into survival prediction in advanced cancer patients.

  17. Using Improved Ant Colony Algorithm to Investigate EMU Circulation Scheduling Problem

    Directory of Open Access Journals (Sweden)

    Yu Zhou

    2014-01-01

    Full Text Available High-speed railway is one of the most important ways to solve the long-standing travel difficulty problem in China. However, due to the high acquisition and maintenance cost, it is impossible for decision-making departments to purchase enough EMUs to satisfy the explosive travel demand. Therefore, there is an urgent need to study how to utilize EMU more efficiently and reduce costs in the case of completing a given task in train diagram. In this paper, an EMU circulation scheduling model is built based on train diagram constraints, maintenance constraints, and so forth; in the model solving process, an improved ACA algorithm has been designed. A case study is conducted to verify the feasibility of the model. Moreover, contrast tests have been carried out to compare the efficiency between the improved ACA and the traditional approaches. The results reveal that improved ACA method can solve the model with less time and the quality of each representative index is much better, which means that efficiency of the improved ACA method is higher and better scheduling scheme can be obtained.

  18. Meat quality traits in the emu (Dromaius novaehollandiae) as affected by muscle type and animal age.

    Science.gov (United States)

    Berge, P; Lepetit, J; Renerre, M; Touraille, C

    1997-02-01

    Meat quality traits were determined in the major muscles of the emu (Dromaius novaehollandiae) at different slaughter ages (6, 10, 14, 17 or ≥20 months). A mean ultimate pH value of 5.5 was reached within around 3 h post mortem, but this value was 6.1 in animals that had suffered a preslaughter stress (transportation and fasting). The collagen and pigment contents varied widely among the muscles. The protein and pigment contents increased with animal age, but this effect was perceptible only between 6 and 14 months. The other chemical constituents were little affected by muscle type or animal age. The intense red colour of emu meat, due to a high pigment content, was very sensitive to oxidation, thus limiting the storage of fresh meat under aerobic conditions to short periods of time. Despite a rapid post-mortem tenderization (≤24 h), the residual myofibrillar strength obtained after extended ageing remained intermediate between those reported for chicken and beef. The tenderness of meat, cooked to 60 °C, differed between muscles and decreased with increasing age, thus reflecting the changes occuring in the concentration and in the heat stability of the intramuscular connective tissue.

  19. Current status of advanced gastrointestinal endoscopy training fellowships in the United States

    Directory of Open Access Journals (Sweden)

    Stephen J Heller

    2011-01-01

    Full Text Available Stephen J Heller, Jeffrey L TokarDepartment of Medicine, Fox Chase Cancer Center, Philadelphia, PA, USAAbstract: Rapid growth in the field of advanced gastrointestinal endoscopy has led to an increase in specialized therapeutic endoscopy fellowships. The cornerstones of these programs are training in endoscopic retrograde cholangiopancreatography (ERCP and endoscopic ultrasound. These procedures are more complex and challenging to master than routine colonoscopy and upper endoscopy, and in the case of ERCP, higher risk. The concentration of the educational experience in the hands of relatively fewer trainees with specialized interest in advanced endoscopy has resulted in providing a focused cohort of graduating fellows with higher case volumes in training, which likely enhances diagnostic and therapeutic success and safer performance of these procedures. Endoscopic simulators, although not currently in widespread use, have the potential to improve advanced procedural training without jeopardizing patient safety.Keywords: gastrointestinal endoscopy, training, procedures, safety 

  20. Advanced In-Space Propulsion (AISP): High Temperature Boost Power Processing Unit (PPU) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The task is to investigate the technology path to develop a 10kW modular Silicon Carbide (SiC) based power processing unit (PPU). The PPU utilizes the high...

  1. Characterization of suspended bacteria from processing units in an advanced drinking water treatment plant of China.

    Science.gov (United States)

    Wang, Feng; Li, Weiying; Zhang, Junpeng; Qi, Wanqi; Zhou, Yanyan; Xiang, Yuan; Shi, Nuo

    2017-05-01

    For the drinking water treatment plant (DWTP), the organic pollutant removal was the primary focus, while the suspended bacterial was always neglected. In this study, the suspended bacteria from each processing unit in a DWTP employing an ozone-biological activated carbon process was mainly characterized by using heterotrophic plate counts (HPCs), a flow cytometer, and 454-pyrosequencing methods. The results showed that an adverse changing tendency of HPC and total cell counts was observed in the sand filtration tank (SFT), where the cultivability of suspended bacteria increased to 34%. However, the cultivability level of other units stayed below 3% except for ozone contact tank (OCT, 13.5%) and activated carbon filtration tank (ACFT, 34.39%). It meant that filtration processes promoted the increase in cultivability of suspended bacteria remarkably, which indicated biodegrading capability. In the unit of OCT, microbial diversity indexes declined drastically, and the dominant bacteria were affiliated to Proteobacteria phylum (99.9%) and Betaproteobacteria class (86.3%), which were also the dominant bacteria in the effluent of other units. Besides, the primary genus was Limnohabitans in the effluents of SFT (17.4%) as well as ACFT (25.6%), which was inferred to be the crucial contributors for the biodegradable function in the filtration units. Overall, this paper provided an overview of community composition of each processing units in a DWTP as well as reference for better developing microbial function for drinking water treatment in the future.

  2. Production of advanced biofuels: Co-processing of upgraded pyrolysis oil in standard refinery units

    NARCIS (Netherlands)

    Miguel Mercader, de F.; Groeneveld, M.J.; Kersten, S.R.A.; Way, N.W.J.; Schaverien, C.J.; Hogendoorn, J.A.

    2010-01-01

    One of the possible process options for the production of advanced biofuels is the co-processing of upgraded pyrolysis oil in standard refineries. The applicability of hydrodeoxygenation (HDO) was studied as a pyrolysis oil upgrading step to allow FCC co-processing. Different HDO reaction end temper

  3. United States Army Advanced Medic (91B30) Training: An Iterative Decision Method Application

    Science.gov (United States)

    1983-03-25

    be provided through subsequent boards. Croup casks, group Interaccion process and group performance effecciveness: A review and In...L. Berkowlcz (Ed.), Advances In Experimental Social Psychology (Vol 8). New York: Ac- Reference Noce I. Flnstuen, K...discussion upon the correctness of group decisions, when the factor of majority influ- ence is allowed for. Journal of Social

  4. Integrated Advanced Microwave Sounding Unit-A (AMSU-A). Performance Verification Report: Antenna Drive Subsystem METSAT AMSU-A2 (PN:1331200-2, SN:108)

    Science.gov (United States)

    Haapala, C.

    1999-01-01

    This is the Performance Verification Report, Antenna Drive Subassembly, Antenna Drive Subsystem, METSAT AMSU-A2 (P/N 1331200-2, SN: 108), for the Integrated Advanced Microwave Sounding Unit-A (AMSU-A).

  5. Advanced secondary recovery demonstration for the Sooner Unit. Annual report, October 1992--May 1993

    Energy Technology Data Exchange (ETDEWEB)

    Sippel, M.; Junkin, J.; Pritchett, R. [and others

    1995-07-01

    The objectives of this project are to demonstrate the effectiveness of a multi-diciplinary approach to targeted infill drilling and improved reservoir management. The first phase involves geophysical, geological, and engineering data acquisition and analysis to identify optimum well sites and to develop a reservoir operations plan. This report summarizes activities concerned with phase I of the Sooner Unit Project.

  6. Soil Conservation Unit for the Advanced Crop Production and Marketing Course. Student Reference. AGDEX 570.

    Science.gov (United States)

    Stewart, Bob R.; And Others

    This student reference booklet is designed to accompany lessons outlined in the companion instructor's guide on soil conservation. The soil conservation unit builds on competencies gained in Agricultural Science I and II. Informative material is provided for these eight lessons: benefits of conservation, land utilization, how soils are eroded,…

  7. Advanced Investigation and Comparative Study of Graphics Processing Unit-queries Countered

    Directory of Open Access Journals (Sweden)

    A. Baskar

    2014-10-01

    Full Text Available GPU, Graphics Processing Unit, is the buzz word ruling the market these days. What is that and how has it gained that much importance is what to be answered in this research work. The study has been constructed with full attention paid towards answering the following question. What is a GPU? How is it different from a CPU? How good/bad it is computationally when comparing to CPU? Can GPU replace CPU, or it is a day dream? How significant is arrival of APU (Accelerated Processing Unit in market? What tools are needed to make GPU work? What are the improvement/focus areas for GPU to stand in the market? All the above questions are discussed and answered well in this study with relevant explanations.

  8. Systemic Aspergillosis in Emu Chicks in an organised farm in Kerala

    Directory of Open Access Journals (Sweden)

    Sunitha Karunakaran1

    Full Text Available Systematic post mortem examination was carried out on seven Emu chicks submitted for disease diagnosis to Clinical Laboratory, District Veterinary Centre, Palakkad. On examination, numerous small greyish white nodules were seen in the lungs, air sacs, kidney and serosal surface of proventriculus. Dark red liver with necrotic areas and dark coloured spleen were the other lesions. Microscopically the lungs revealed granulomas with central areas of caseation surrounded by mononuclear cells and fibroblasts. PAS positive fungal hyphae could be seen in the lesion. Aspergillus fumigatus could be isolated in Sabouraud Dextrose Agar from the lesions. This is the first report on the occurrence of systemic aspergillosis in Emus from Kerala. [Veterinary World 2010; 3(10.000: 453-455

  9. Radiation tests of the EMU spacesuit for the International SpaceStation using energetic protons

    Energy Technology Data Exchange (ETDEWEB)

    Zeitlin, C.; Heilbronn, L.; Miller, J.; Shavers, M.

    2001-06-04

    Measurements using silicon detectors to characterize theradiation transmitted through the EMU spacesuit and a human phantom havebeen performed using 155 and 250 MeV proton beams at the Loma LindaUniversity Medical Center (LLUMC). The beams simulate radiationencountered in space, where trapped protons having kinetic energies onthe order of 100 MeV are copious. Protons with 100 MeV kinetic energy andabove can penetrate many centimeters of water of other light materials,so that astronauts exposed to such energetic particles will receive dosesto their internal organs. This dose can be enhanced or reduced byshielding - either from the spacesuit or the self-shielding of the body -but minimization of the risk depends on details of the incident particleflux (in particular the energy spectrum) and on the dose responses of thevarious critical organs.

  10. The new fiscal rules for the EMU. Threats from heterogeneity and interdependence

    Directory of Open Access Journals (Sweden)

    Roberto Tamborini

    2013-12-01

    Full Text Available This paper examines the reform of fiscal rules in the European Economic and Monetary Union (EMU, in particular the Stability and Convergence Plans (SCP of public debts. The focus is on factors of heterogeneity and interdependence in the key variables of growth and interest rates. By means of dynamic models of the debt/GDP ratio in a multi-country setup, the paper shows how these factors may jeopardize the main goal of fostering convergence and keeping debt/GDP ratios equalized and stable over time, especially in case of uncoordinated implementation of large SCPs across member countries. Controlling for these factors in practice may be quite demanding, but the key flaw isthat they are almost entirely ignored in the SGP institutional framework that therefore requires a different approach.

  11. Recent Advances in Pulmonary Rehabilitation for Patients in the Intensive Care Unit (ICU)

    OpenAIRE

    SATO, Ryuhei; Ebihara, Satoru; Kohzuki, Masahiro

    2017-01-01

    Pulmonary rehabilitation is important to prevent complications in critically ill patients in the intensive care unit (ICU) who are on mechanical ventilation. However, the effectiveness and adverse events related to pulmonary rehabilitation for patients in the ICU are largely unclear because of the diversity of diseases and various levels of severity in this situation. This review aims to clarify the evidence currently available for pulmonary rehabilitation in critically ill adult patients req...

  12. Advances in the prevention of heterosexual transmission of HIV/AIDS among women in the United States

    Directory of Open Access Journals (Sweden)

    Nadine E. Chen

    2011-06-01

    Full Text Available Despite recent advances in testing and treatment, the incidence of HIV/AIDS in the United States has remained stagnant with an estimated 56,300 new infections every year. Women account for an increasing proportion of the epidemic. The vulnerability of women to HIV stems from both increased biologic susceptibility to heterosexual transmission and also the social, economic, and structural disadvantages they often confront. This review describes the main reasons for the increased vulnerability of U.S. women to HIV transmission with particular emphasis on specific high-risk groups including: non-Hispanic blacks, women who use drugs, women with a history of incarceration, and victims of intimate partner violence. Although behavioral approaches to HIV prevention may be effective, pragmatic implementation is often difficult, especially for women who lack sociocultural capital to negotiate condoms with their male partners. Recent advances in HIV prevention show promise in terms of female-initiated interventions. These notably include female condoms, non-specific vaginal microbicides, and antiretroviral oral and vaginal pre-exposure prophylaxis. In this review, we will present evidence in support of these new female-initiated interventions while also emphasizing the importance of advocacy and the political support for these scientific advances to be successful.

  13. Reflections from Dutch advanced nursing practice students on psychiatric mental healthcare in the United States.

    Science.gov (United States)

    Maas, Lillian Garcia; Ezeobele, Ifeoma Ezebuiro

    2014-12-01

    An international clinical learning experience is a unique opportunity to witness another nursing and healthcare system. The Master of Advanced Nursing Practice (MANP) program at Rotterdam University of Applied Sciences in the Netherlands, mandates an international experience. Semi-structured qualitative interviews, a focus group session and written reflections were used for data collection with 6 Dutch MANP nursing students who specialized in psychiatric mental healthcare. Five major themes were revealed from the data. The themes identified were as follows: (1) pride and passion for mental health profession (2) role diversity within psychiatric mental health nursing (3) nursing leadership at the organization level (4) comparable Westernized approaches to mental healthcare and (5) differences in access to care. Incorporating a mandatory international clinical experience is a beneficial tool to promote a global understanding of the unique advanced practice nursing student's academic and professional development. The international clinical learning experience is considered a highlight of the 2-year MANP program. The students are able to gain a new and broader vision of the APN role and a greater appreciation for the Dutch healthcare system. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Development of Advanced In core Management Codes for Ulchin Unit 1, 2

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Hee; Park, Moon Gyu [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

    1996-12-31

    As the first case of FRAMATOME`s plants, Ulchin Unit 1 Cycle 8 core was loaded with V5H fuel. Because of the heterogeneity in the axial enrichment of the V5H fuel, FRAMATOME`s 2-D in core management codes, CEDRIC-CARIN-ESTHER, are no longer valid to be used for in core management. In order to analyze Ulchin Unit 1 an 2 cores loaded with V5H fuel exactly, this study substituted them with WH`s In core-3D and Tote code. The previous IN CORE-Tote codes have been utilized on the HP workstation or the IBM mainframe which are not easily accessible by the site engineers and require the complicated manipulation in the computer network system. This study developed the PC-version of IN CORE-3D and Tote codes available in plants, including an interface code linking the data measured by the in core instrument system (RIC-KIT system) to IN CORE code. These codes reduce the time to manage in core and increase the economic benefits. We installed the developed codes in Ulchin Unit 1 and 2 and actually applied them to the core power distribution measurement performed during Cycle 8 power escalation tests. The results satisfied all limits of Technical Specification very well. The major contents of this study can be categorized as follows. 1. Analysis of the in core management codes. (a) Analysis of flux mapping system and measurement reduction algorithm. (b) Analysis of the methodology of in core management codes. 2. Development and verification of PC-version in core management codes. (a) Development of the measured-data processing code (C2I). (b) Development of PC-version IN CORE code. (c) Development of PC-version Tote code (d) Verification of the developed codes. 3. Application to core physics test of Ulchin until cycle 8. (a) Power distribution measurement at 75% and 100%. (author). 14 refs., figs., tabs.

  15. Advanced Recovery and Integrated Extraction System (ARIES): The United State's demonstration line for pit disassembly and conversion

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Timothy O.

    1998-03-01

    The Advanced Recovery and Integrated Extraction System (ARIES) is a pit disassembly and conversion demonstration line at Los Alamos National Laboratory's plutonium facility. Pits are the core of a nuclear weapon that contains fissile material. With the end of the cold war, the United States began a program to dispose of the fissile material contained in surplus nuclear weapons. In January of 1997, the Department of Energy's Office of Fissile Material Disposition issued a Record of Decision (ROD) on the disposition of surplus plutonium. This decision contained a hybrid option for disposition of the plutonium, immobilization and mixed oxide fuel. ARIES is the cornerstone of the United States plutonium disposition program that supplies the pit demonstration plutonium feed material for either of these disposition pathways. Additionally, information from this demonstration is being used to design the United States Pit Disassembly and Conversion Facility. AH of the ARIES technologies were recently developed and incorporate waste minimization. The technologies include pit bisection, hydride/dehydride, metal to oxide conversion process, packaging, and nondestructive assay (NDA). The current schedule for the ARIES integrated Demonstration will begin in the Spring of 1998. The ARIES project involves a number of DOE sites including Los Alamos National Laboratory as the lead laboratory, Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratories. Moreover, the ARIES team is heavily involved in working with Russia in their pit disassembly and conversion activities.

  16. Advanced Motor Control Test Facility for NASA GRC Flywheel Energy Storage System Technology Development Unit

    Science.gov (United States)

    Kenny, Barbara H.; Kascak, Peter E.; Hofmann, Heath; Mackin, Michael; Santiago, Walter; Jansen, Ralph

    2001-01-01

    This paper describes the flywheel test facility developed at the NASA Glenn Research Center with particular emphasis on the motor drive components and control. A four-pole permanent magnet synchronous machine, suspended on magnetic bearings, is controlled with a field orientation algorithm. A discussion of the estimation of the rotor position and speed from a "once around signal" is given. The elimination of small dc currents by using a concurrent stationary frame current regulator is discussed and demonstrated. Initial experimental results are presented showing the successful operation and control of the unit at speeds up to 20,000 rpm.

  17. Comparison of Advanced Residential Water Heating Technologies in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Maguire, Jeff [National Renewable Energy Lab. (NREL), Golden, CO (United States); Fang, Xia [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wilson, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-05-01

    In this study, gas storage, gas tankless, condensing, electric storage, heat pump, and solar water heaters were simulated in several different climates across the United States, installed in both conditioned and unconditioned space and subjected to several different draw profiles. While many pre-existing models were used, new models of condensing and heat pump water heaters were created specifically for this work. In each case modeled, the whole house was simulated along with the water heater to capture any interactions between the water heater and the space conditioning equipment.

  18. Advanced direct liquefaction concepts for PETC generic units. Quarterly technical progress report, January--March 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    In the Advance Coal Liquefaction Concept Proposal (ACLCP) carbon monoxide (CO) and water have been proposed as the primary reagents in the pretreatment process. The main objective of this project is to develop a methodology for pretreating coal under mild conditions based on a combination of existing processes which have shown great promise in liquefaction, extraction and pyrolysis studies. The aim of this pretreatment process is to partially depolymerise the coal, eliminate oxygen and diminish the propensity for retograde reactions during subsequent liquefaction. The desirable outcome of the CO pretreatment step should be: (1) enhanced liquefaction activity and/or selectivity toward products of higher quality due to chemical modification of the coal structure; (2) cleaner downstream products; (3) overall improvement in operability and process economics.

  19. Advanced direct liquefaction concepts for PETC generic units. Final report, Phase I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The Advanced Concepts for Direct Coal Liquefaction program was initiated by the Department of Energy in 1991 to develop technologies that could significantly reduce the cost of producing liquid fuels by the direct liquefaction of coal. The advanced 2-stage liquefaction technology that was developed at Wilsonville over the past 10 years has contributed significantly toward decreasing the cost of producing liquids from coal to about $33/bbl. It remains, however, the objective of DOE to further reduce this cost to a level more competitive with petroleum based products. This project, among others, was initiated to investigate various alternative approaches to develop technologies that might ultimately lead to a 25 % reduction in cost of product. In this project a number of novel concepts were investigated, either individually or in a coupled configuration that had the potential to contribute toward meeting the DOE goal. The concepts included mature technologies or ones closely related to them, such as coal cleaning by oil agglomeration, fluid coking and distillate hydrotreating and dewaxing. Other approaches that were either embryonic or less developed were chemical pretreatment of coal to remove oxygen, and dispersed catalyst development for application in the 2-stage liquefaction process. This report presents the results of this project. It is arranged in four sections which were prepared by participating organizations responsible for that phase of the project. A summary of the overall project and the principal results are given in this section. First, however, an overview of the process economics and the process concepts that were developed during the course of this program is presented.

  20. Advancing probiotic research in humans in the United States: Challenges and strategies.

    Science.gov (United States)

    Sanders, Mary Ellen; Shane, Andi L; Merenstein, Daniel J

    2016-01-01

    This is a summary from a workshop convened as part of the 13(th) annual meeting of the International Scientific Association for Probiotics and Prebiotics. A group of 24 stakeholders, including clinical experts, researchers, federal government officials, funding agencies, lawyers and industry experts met to review the challenges of the current regulatory approach to human research on probiotics in the USA and to discuss ways to move research forward. There was agreement that some of the current regulatory requirements imposed on probiotic research in the United States hindered research progress and increased cost without improving study subject safety. Many situations were outlined by clinical investigators demonstrating the impact of regulatory delays on research progress. Additionally, research is compromised when study designs and outcomes require manipulation so as to invoke less burdensome regulatory requirements. These responses by investigators to regulatory requirements have placed United States' researchers at a disadvantage. The public ultimately suffer when research to clarify the role of these products on health is stalled. Workshop participants concurred that regulatory oversight should balance study subject vulnerability with documented safety for the intended use for the probiotic strain, and that human research on foods and supplements should not be be regulated as drug research. Challenges and potential improvement strategies are discussed.

  1. Advanced Stirling Convertor Control Unit Testing at NASA Glenn Research Center in the Radioisotope Power Systems System Integration Laboratory

    Science.gov (United States)

    Dugala, Gina M.; Taylor, Linda M.; Kussmaul, Michael; Casciani, Michael; Brown, Gregory; Wiser, Joel

    2017-01-01

    Future NASA missions could include establishing Lunar or Martian base camps, exploring Jupiters moons and travelling beyond where generating power from sunlight may be limited. Radioisotope Power Systems (RPS) provide a dependable power source for missions where inadequate sunlight or operational requirements make other power systems impractical. Over the past decade, NASA Glenn Research Center (GRC) has been supporting the development of RPSs. The Advanced Stirling Radioisotope Generator (ASRG) utilized a pair of Advanced Stirling Convertors (ASC). While flight development of the ASRG has been cancelled, much of the technology and hardware continued development and testing to guide future activities. Specifically, a controller for the convertor(s) is an integral part of a Stirling-based RPS. For the ASRG design, the controller maintains stable operation of the convertors, regulates the alternating current produced by the linear alternator of the convertor, provides a specified direct current output voltage for the spacecraft, synchronizes the piston motion of the two convertors in order to minimize vibration as well as manage and maintain operation with a stable piston amplitude and hot end temperature. It not only provides power to the spacecraft but also must regulate convertor operation to avoid damage to internal components and maintain safe thermal conditions after fueling. Lockheed Martin Coherent Technologies has designed, developed and tested an Engineering Development Unit (EDU) Advanced Stirling Convertor Control Unit (ACU) to support this effort. GRC used the ACU EDU as part of its non-nuclear representation of a RPS which also consists of a pair of Dual Advanced Stirling Convertor Simulator (DASCS), and associated support equipment to perform a test in the Radioisotope Power Systems System Integration Laboratory (RSIL). The RSIL was designed and built to evaluate hardware utilizing RPS technology. The RSIL provides insight into the electrical

  2. United States of America Department of Health and Human Services support for advancing influenza vaccine manufacturing in the developing world.

    Science.gov (United States)

    Perdue, Michael L; Bright, Rick A

    2011-07-01

    Since 2005, the Government of the United States of America has provided more than US$ 50 million to advance influenza vaccine development in low-resourced countries. This programme has provided a unique opportunity for the US Government to develop a comprehensive view of, and to understand better the challenges and future needs for influenza vaccines in the developing world. The funding for this programme has been primarily through a cooperative agreement with the World Health Organization (WHO) to support directly its capacity-building grants to government-owned or -supported vaccine manufacturers in developing countries. A second cooperative agreement with the Program for Appropriate Technologies in Health (PATH) was initiated to accelerate the completion of a current Good Manufacturing Practice cGMP production facility, along with supporting facilities to obtain a reliable source of eggs, and to conduct clinical trials of influenza vaccine manufactured in Vietnam. This mechanism of utilizing cooperative agreements to support capacity-building for vaccine development in low-resourced settings has been novel and unique and has yielded fruitful returns on minimal investment. The information derived from this programme helps to clarify not only the development challenges for influenza vaccines and how the United States may assist in meeting those challenges, but also other vaccine development issues common to manufacturers in developing countries. While building the initial capacity to produce influenza vaccines can be a straightforward exercise, the sustainability of the enterprise and expansion of subsequent markets will be the key to future usefulness. There is hope for expansion of the global influenza vaccine market. Ongoing burden of disease studies are elucidating the impact of influenza infections, particularly in children, and more countries will take note and respond accordingly, since respiratory diseases are now the number one killer of children under

  3. Methodological advances in unit cost calculation of psychiatric residential care in Spain.

    Science.gov (United States)

    Moreno, Karen; Sanchez, Eduardo; Salvador-Carulla, Luis

    2008-06-01

    The care of the severe mentally ill who need intensive support for their daily living (dependent persons), accounts for an increasingly large proportion of public expenditure in many European countries. The main aim of this study was the design and implementation of solid methodology to calculate unit costs of different types of care. To date, methodologies used in Spain have produced inaccurate figures, suggesting few variations in patient consumption of the same service. An adaptation of the Activity-Based-Costing methodology was applied in Navarre, a region in the North of Spain, as a pilot project for the public mental health services. A unit cost per care process was obtained for all levels of care considered in each service during 2005. The European Service Mapping Schedule (ESMS) codes were used to classify the services for later comparisons. Finally, in order to avoid problems of asymmetric cost distribution, a simple Bayesian model was used. As an illustration, we report the results obtained for long-term residential care and note that there are important variations between unit costs when considering different levels of care. Considering three levels of care (Level 1-low, Level 2-medium and Level 3-intensive), the cost per bed in Level 3 was 10% higher than that of Level 2. The results obtained using the cost methodology described provide more useful information than those using conventional methods, although its implementation requires much time to compile the necessary information during the initial stages and the collaboration of staff and managers working in the services. However, in some services, if no important variations exist in patient care, another method would be advisable, although our system provides very useful information about patterns of care from a clinical point of view. Detailed work is required at the beginning of the implementation in order to avoid the calculation of distorted figures and to improve the levels of decision making

  4. RM12-2703 Advanced Rooftop Unit Control Retrofit Kit Field Demonstration: Hawaii and Guam Energy Improvement Technology Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Doebber, I.; Dean, J.; Dominick, J.; Holland, G.

    2014-03-01

    As part of its overall strategy to meet its energy goals, the Naval Facilities Engineering Command (NAVFAC) partnered with U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to rapidly demonstrate and deploy cost-effective renewable energy and energy efficiency technologies. This was one of several demonstrations of new and underutilized commercial energy efficiency technologies. The consistent year-round demand for air conditioning and dehumidification in Hawaii provides an advantageous demonstration location for advanced rooftop control (ARC) retrofit kits to packaged rooftop units (RTUs). This report summarizes the field demonstration of ARCs installed on nine RTUs serving a 70,000-ft2 exchange store (large retail) and two RTUs, each serving small office buildings located on Joint Base Pearl Harbor-Hickam (JBPHH).

  5. Advances in metals classification under the United Nations globally harmonized system of classification and labeling.

    Science.gov (United States)

    Skeaff, James; Adams, William J; Rodriguez, Patricio; Brouwers, Tony; Waeterschoot, Hugo

    2011-10-01

    This article shows how regulatory obligations mandated for metal substances can be met with a laboratory-based transformation/dissolution (T/D) method for deriving relevant hazard classification outcomes, which can then be linked to attendant environmental protection management decisions. We report the results of a ring-test at 3 laboratories conducted to determine the interlaboratory precision of the United Nations T/D Protocol (T/DP) in generating data for classifying 4 metal-bearing substances for acute and chronic toxicity under the United Nations Globally Harmonized System of Classification and Labelling (GHS) criteria with respect to the aquatic environment. The test substances were Ni metal powder, cuprous oxide (Cu(2) O) powder, tricobalt tetroxide (Co(3) O(4) ) powder, and cuttings of a NILO K Ni-Co-Fe alloy. Following GHS Annex 10 guidelines, we tested 3 loadings (1, 10, and 100 mg/L) of each substance at pH 6 and 8 for 7 or 28 d to yield T/D data for acute and chronic classification, respectively. We compared the T/DP results (dissolved metal in aqueous media) against acute and chronic ecotoxicity reference values (ERVs) for each substance to assess GHS classification outcomes. For dissolved metal ions, the respective acute and chronic ERVs established at the time of the T/D testing were: 29 and 8 µg/L for Cu; 185 and 1.5 µg/L for Co; and 13.3 and 1.0 mg/L for Fe. The acute ERVs for Ni were pH-dependent: 120 and 68 µg/L at pH 6 and 8, respectively, whereas the chronic ERV for Ni was 2.4 µg/L. The acute classification outcomes were consistent among 3 laboratories: cuprous oxide, Acute 1; Ni metal powder, Acute 3; Co(3) O(4) and the NILO K alloy, no classification. We obtained similar consistent results in chronic classifications: Cu(2) O, Ni metal powder, and Co(3) O(4) , Chronic 4; and the NILO K alloy, no classification. However, we observed equivocal results only in 2 of a possible 48 cases where the coefficient of variation of final T

  6. Advances in understanding societal vulnerability to tsunamis in the United States

    Science.gov (United States)

    Wood, N. J.

    2009-12-01

    Loss of life and property damage from future tsunamis can be reduced if officials develop risk-reduction strategies and education programs that address how at-risk populations and communities are specifically vulnerable to tsunamis. Prior to the 2004 Indian Ocean tsunami, information concerning societal vulnerability to tsunamis in the U.S. was largely limited to state-level summaries of the number of residents within one kilometer of the coast. Since 2004, the U.S. Geological Survey has furthered the Nation’s understanding of societal vulnerability to tsunamis with several studies that describe the exposure, sensitivity, and adaptive capacity of at-risk populations in tsunami-hazard zones. Community-level assessments have been completed in Hawaii, Oregon, and Washington to document variations in the number and types of people, businesses, and critical facilities in tsunami-prone areas. A method using midresolution satellite imagery was developed to identify community variations in the amount of developed land in tsunami-prone areas. Factor analysis and geospatial analysis were integrated to model variations in demographic sensitivity to tsunamis. Public workshops have been held to examine community sensitivity, adaptive capacity and post-tsunami recovery. Results demonstrate that social vulnerability to tsunamis varies throughout a community or region and that certain areas are likely to suffer disproportionately due to differences in pre-tsunami socioeconomic conditions and other demographic attributes. This presentation will summarize advances in understanding societal vulnerability in the U.S. to tsunamis since the 2004 Indian Ocean tsunami, as well as discuss opportunities and needs for further work.

  7. Updating United States Advanced Battery Consortium and Department of Energy battery technology targets for battery electric vehicles

    Science.gov (United States)

    Neubauer, Jeremy; Pesaran, Ahmad; Bae, Chulheung; Elder, Ron; Cunningham, Brian

    2014-12-01

    Battery electric vehicles (BEVs) offer significant potential to reduce the nation's consumption of petroleum based products and the production of greenhouse gases however, their widespread adoption is limited largely by the cost and performance limitations of modern batteries. With recent growth in efforts to accelerate BEV adoption (e.g. the Department of Energy's (DOE) EV Everywhere Grand Challenge) and the age of existing BEV battery technology targets, there is sufficient motivation to re-evaluate the industry's technology targets for battery performance and cost. Herein we document the analysis process that supported the selection of the United States Advanced Battery Consortium's (USABC) updated BEV battery technology targets. Our technology agnostic approach identifies the necessary battery performance characteristics that will enable the vehicle level performance required for a commercially successful, mass market full BEV, as guided by the workgroup's OEM members. The result is an aggressive target, implying that batteries need to advance considerably before BEVs can be both cost and performance competitive with existing petroleum powered vehicles.

  8. Non-Linear Advanced Control of the LHC Inner Triplet Heat Exchanger Test Unit

    CERN Document Server

    Blanco-Viñuela, E; De Prada-Moraga, C; Cristea, S

    2002-01-01

    The future Large Hadron Collider (LHC) at CERN will include eight interaction region final focus magnet systems, the so-called "Inner Triplet", one on each side of the four beam collision points. The Inner Triplets will be cooled in a static bath of pressurized He II nominally at 1.9 K. This temperature is a control parameter and has very severe constraints in order to avoid the transition from the superconducting to normal resistive state. The main difference in these special zones with respect to a regular LHC cell is higher dynamic heat load unevenly distributed which modifies largely the process characteristics and hence the controller performance. Several control strategies have already been tested at CERN in a pilot plant (LHC String Test) which reproduced a LHC half-cell. In order to validate a common control structure along the whole LHC ring, a Nonlinear Model Predictive Control (NMPC) has been developed and implemented in the Inner Triplet Heat Exchanger Unit (IT-HXTU) at CERN. Automation of the Inn...

  9. Advanced Colorimetry of Display Systems: Tetra-Chroma3 Display Unit

    Directory of Open Access Journals (Sweden)

    J. Kaiser

    2005-06-01

    Full Text Available High-fidelity color image reproduction is one of the key issues invisual telecommunication systems, for electronic commerce,telemedicine, digital museum and so on. All colorimetric standards ofdisplay systems are up to the present day trichromatic. But, from theshape of a horseshoe-area of all existing colors in the CIE xychromaticity diagram it follows that with three real reproductivelights, the stated area in the CIE xy chromaticity diagram cannot beoverlaid. The expansion of the color gamut of a display device ispossible in a few ways. In this paper, the way of increasing the numberof primaries is studied. The fourth cyan primary is added to threeconventional ones to enlarge the color gamut of reproduction towardscyans and yellow-oranges. The original method of color management forthis new display unit is introduced. In addition, the color gamut ofthe designed additive-based display is successfully compared with thecolor gamut of a modern subtractive-based system. A display with morethan three primary colors is called a multiprimary color display. Thevery advantageous property of such display is the possibility todisplay metameric colors.

  10. Formulation of enrofloxacin SLNs and its pharmacokinetics in emu ( Dromaius novaehollandiae) birds

    Science.gov (United States)

    Senthil Kumar, P.; Arivuchelvan, A.; Jagadeeswaran, A.; Punniamurthy, N.; Selvaraj, P.; Richard Jagatheesan, P. N.; Mekala, P.

    2015-08-01

    The study was conducted to formulate the enrofloxacin solid lipid nanoparticles (SLNs) with sustained release profile and improved pharmacological activity and evaluate the pharmacokinetic behaviour of enrofloxacin SLNs after oral routes of administration in emus. The SLNs were prepared using tripalmitin as lipid carrier, Tween 80 and Span 80 as surfactants and polyvinyl alcohol (PVA) as a stabilizer by a hot homogenization coupled with ultrasonication method. The prepared enrofloxacin SLNs formulations were characterized for further investigation in emu birds. The pharmacokinetics of native enrofloxacin was studied after i.v. and oral bolus administration at 10 mg/kg in emu birds and compared with the disposition kinetics of enrofloxacin SLNs. Enrofloxacin and its metabolite ciprofloxacin in plasma were estimated using HPLC and the pharmacokinetic parameters were calculated by a non-compartmental analysis. The results demonstrated that the particle size, polydispersity index, zeta potential, encapsulation efficiency and loading capacity of the SLNs were 154.72 ± 6.11 nm, 0.42 ± 0.11, -28.83 ± 0.60 mV, 59.66 ± 3.22 and 6.13 ± 0.32 %, respectively. AFM and TEM images showed spherical to circular particles with well-defined periphery. In vitro drug release exhibited biphasic pattern with an initial burst release of 18 % within 2 h followed by sustained release over 96 h. Pharmacokinetic results showed that the t 1/2 β , AUC0-∞, V darea/ F, MRT and bioavailability were 3.107, 1.894, 1.594, 2.993 and 1.895 times enhanced ( p < 0.01), while CLB and β were significantly ( p < 0.01) decreased by 1.958 and 3.056 times compared to the values of native enrofloxacin administered orally. The ratio of AUC0- t cipro/AUC0- t enro after administration of native enrofloxacin and enrofloxacin SLNs was less than 10 %. The t 1/2 β and MRT of the metabolite were longer than those of the parent substance. The PK/PD results confirmed that the SLNs extended the enrofloxacin

  11. Advanced Understanding of Convection Initiation and Optimizing Cloud Seeding by Advanced Remote Sensing and Land Cover Modification over the United Arab Emirates

    Science.gov (United States)

    Wulfmeyer, V.; Behrendt, A.; Branch, O.; Schwitalla, T.

    2016-12-01

    A prerequisite for significant precipitation amounts is the presence of convergence zones. These are due to land surface heterogeneity, orography as well as mesoscale and synoptic scale circulations. Only, if these convergence zones are strong enough and interact with an upper level instability, deep convection can be initiated. For the understanding of convection initiation (CI) and optimal cloud seeding deployment, it is essential that these convergence zones are detected before clouds are developing in order to preempt the decisive microphysical processes for liquid water and ice formation. In this presentation, a new project on Optimizing Cloud Seeding by Advanced Remote Sensing and Land Cover Modification (OCAL) is introduced, which is funded by the United Arab Emirates Rain Enhancement Program (UAEREP). This project has two research components. The first component focuses on an improved detection and forecasting of convergence zones and CI by a) operation of scanning Doppler lidar and cloud radar systems during two seasonal field campaigns in orographic terrain and over the desert in the UAE, and b) advanced forecasting of convergence zones and CI with the WRF-NOAHMP model system. Nowcasting to short-range forecasting of convection will be improved by the assimilation of Doppler lidar and the UAE radar network data. For the latter, we will apply a new model forward operator developed at our institute. Forecast uncertainties will be assessed by ensemble simulations driven by ECMWF boundaries. The second research component of OCAL will study whether artificial modifications of land surface heterogeneity are possible through plantations or changes of terrain, leading to an amplification of convergence zones. This is based on our pioneering work on high-resolution modeling of the impact of plantations on weather and climate in arid regions. A specific design of the shape and location of plantations can lead to the formation of convergence zones, which can

  12. The World Monetary System and External Relations of the EMU – Fasten your safety belts!

    Directory of Open Access Journals (Sweden)

    Norbert Weinrichter

    2000-07-01

    Full Text Available Traditionally clustered around one leading "hegemonic" world currency, with the introduction of the euro the international monetary regime might become a "symmetric" dipolar system. This fundamental change would come at a time of already considerable uncertainty when, after the Asian, Russian and Latin American financial crises caused general dismay, the major institutional framework is in a constant reform process as the G7 are considering a "new financial architecture" and the IMF is facing fundamental critique. At the same time, the legal position of the ECOFIN and the ECB in the international field in the international monetary organizations is not yet clear. This article tries to point out some concrete areas of diversity of interest in the international consequences of the introduction of the Euro and analyzes the costs and gains from cooperation in different ways of dealing with these conflicts. From the structure of the issues some conclusions on the challenges facing the institutions can be drawn and some speculation as to the appropriate distribution of competences may be possible. Thus, I try to give an overview of the legal issues surrounding the representation of the EMU in the international monetary institutions in the light of a functional analysis of the challenges created by a transformation of a "hegemonic" monetary system to a "symmetric dipolar system".

  13. The World Monetary System and External Relations of the EMU Fasten your safety belts!

    Directory of Open Access Journals (Sweden)

    Norbert Weinrichter

    2000-07-01

    Full Text Available Traditionally clustered around one leading "hegemonic" world currency, with the introduction of the euro the international monetary regime might become a "symmetric" dipolar system. This fundamental change would come at a time of already considerable uncertainty when, after the Asian, Russian and Latin American financial crises caused general dismay, the major institutional framework is in a constant reform process as the G7 are considering a "new financial architecture" and the IMF is facing fundamental critique. At the same time, the legal position of the ECOFIN and the ECB in the international field in the international monetary organizations is not yet clear. This article tries to point out some concrete areas of diversity of interest in the international consequences of the introduction of the Euro and analyzes the costs and gains from cooperation in different ways of dealing with these conflicts. From the structure of the issues some conclusions on the challenges facing the institutions can be drawn and some speculation as to the appropriate distribution of competences may be possible. Thus, I try to give an overview of the legal issues surrounding the representation of the EMU in the international monetary institutions in the light of a functional analysis of the challenges created by a transformation of a "hegemonic" monetary system to a "symmetric dipolar system".

  14. Osteology and myology of the wing of the Emu (Dromaius novaehollandiae), and its bearing on the evolution of vestigial structures.

    Science.gov (United States)

    Maxwell, Erin E; Larsson, Hans C E

    2007-05-01

    Emus have reduced their wing skeleton to only a single functional digit, but the myological changes associated with this reduction have never been properly described. Moreover, the intraspecific variability associated with these changes has not previously been examined, dissections having been restricted in the past to only one or two individuals. In this paper, the myology and osteology of the Emu wing is described for a sample of five female birds. The Emu showed a marked reduction in the number of muscles in the wing, even compared with other ratites. Many wing muscles showed diversity in structure, origin and insertion sites, number of heads, as well as presence-absence variation. This variability dramatically exceeds that found in flying birds. Evolutionary theory predicts that relaxed selection on vestigial organs should allow more variation to persist in the population, and corresponds to what is observed here. A large amount of fluctuating asymmetry was also detected, indicating reduced canalization of the wing during development.

  15. Optical Breath Gas Extravehicular Activity Sensor for the Advanced Portable Life Support System

    Science.gov (United States)

    Wood, William R.; Casias, Miguel E.; Pilgrim, Jeffrey S.; Chullen, Cinda; Campbell, Colin

    2016-01-01

    The function of the infrared gas transducer used during extravehicular activity (EVA) in the current space suit is to measure and report the concentration of carbon dioxide (CO2) in the ventilation loop. The next generation portable life support system (PLSS) requires highly accurate CO2 sensing technology with performance beyond that presently in use on the International Space Station extravehicular mobility unit (EMU). Further, that accuracy needs to be provided over the full operating pressure range of the suit (3 to 25 psia). Accommodation within space suits demands that optical sensors meet stringent size, weight, and power requirements. A laser diode (LD) sensor based on infrared absorption spectroscopy is being developed for this purpose by Vista Photonics, Inc. Version 1.0 prototype devices were delivered to NASA Johnson Space Center (JSC) in September 2011. The prototypes were upgraded with more sophisticated communications and faster response times to version 2.0 and delivered to JSC in July 2012. The sensors incorporate a laser diode based CO2 channel that also includes an incidental water vapor (humidity) measurement. The prototypes are controlled digitally with an field-programmable gate array microcontroller architecture. Based on the results of the iterative instrument development, further prototype development and testing of instruments were performed leveraging the lessons learned where feasible. The present development extends and upgrades the earlier hardware for the advanced PLSS 2.5 prototypes for testing at JSC. The prototypes provide significantly enhanced accuracy for water vapor measurement and eliminate wavelength drift affecting the earlier versions. Various improvements to the electronics and gas sampling are currently being advanced including the companion development of engineering development units that will ultimately be capable of radiation tolerance. The combination of low power electronics with the performance of a long wavelength

  16. Fiscal Policy in Europe: The Past and Future of EMU Rules from the Perspective of Musgrave and Buchanan

    OpenAIRE

    Buti, Marco; Sapir, André

    2006-01-01

    During the ‘Golden Age’ that lasted until the mid-1970s, Europe witnessed a "public finance" phase, when the three sides of Musgrave’s triangle - allocative efficiency, redistribution and cyclical stabilisation - seemed to reinforce one another. EMU's fiscal rules - embodied in the Maastricht Treaty and the Stability and Growth Pact - can be regarded as the attempt by European governments to overcome the subsequent "public choice" phase à la Buchanan which was characterised by increasing budg...

  17. Remote Sensing Derived Fire Frequency, Soil Moisture and Ecosystem Productivity Explain Regional Movements in Emu over Australia.

    Directory of Open Access Journals (Sweden)

    Nima Madani

    Full Text Available Species distribution modeling has been widely used in studying habitat relationships and for conservation purposes. However, neglecting ecological knowledge about species, e.g. their seasonal movements, and ignoring the proper environmental factors that can explain key elements for species survival (shelter, food and water increase model uncertainty. This study exemplifies how these ecological gaps in species distribution modeling can be addressed by modeling the distribution of the emu (Dromaius novaehollandiae in Australia. Emus cover a large area during the austral winter. However, their habitat shrinks during the summer months. We show evidence of emu summer habitat shrinkage due to higher fire frequency, and low water and food availability in northern regions. Our findings indicate that emus prefer areas with higher vegetation productivity and low fire recurrence, while their distribution is linked to an optimal intermediate (~0.12 m3 m(-3 soil moisture range. We propose that the application of three geospatial data products derived from satellite remote sensing, namely fire frequency, ecosystem productivity, and soil water content, provides an effective representation of emu general habitat requirements, and substantially improves species distribution modeling and representation of the species' ecological habitat niche across Australia.

  18. Emu oil-based lotion effects on neonatal skin barrier during transition from intrauterine to extrauterine life

    Directory of Open Access Journals (Sweden)

    Zanardo V

    2017-08-01

    Full Text Available Vincenzo Zanardo,1 David Giarrizzo,2 Francesca Volpe,1 Lara Giliberti,1 Gianluca Straface1 1Division of Perinatal Medicine, Policlinico Abano Terme, Abano Terme, 2CALANTHA Physiology of Lactation Laboratory, Padua, Italy Abstract: Both appropriate hydration and skin surface pH are fundamental in preventing baby skin barrier damage during transition from intrauterine to extrauterine life. However, effects of topical moisturizers on neonatal stratum corneum temperature, pH, hydration, and elasticity have not been scientifically evaluated in vivo. We checked 31 full-term breastfeeding neonates by non-invasive bioengineering method, which is able to evaluate the basal skin barrier (left heel, and assessed at 6±1 hours after birth, and at 1 and 24 hours after emu oil-based topical treatment. The basal skin barrier of right heel (no oil exposure of each newborn was considered as control. We found that a single application of an emu oil-based lotion was effective in improving heel stratum corneum hydration, which increases both skin pH and elasticity without any effect on temperature. Further studies are needed to confirm long-term beneficial effects of this treatment in a very sensitive patient population. Keywords: skin barrier, neonate, emu oil-based lotion, topical treatment

  19. An Investigation for Arranging the Video Display Unit Information in a Main Control Room of Advanced Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Chong Cheng; Yang, Chih Wei [Institute of Nuclear Energy Research, Atomic Energy Council, Taoyuan (China)

    2014-08-15

    Current digital instrumentation and control and main control room (MCR) technology has extended the capability of integrating information from numerous plant systems and transmitting needed information to operations personnel in a timely manner that could not be envisioned when previous generation plants were designed and built. A MCR operator can complete all necessary operating actions on the video display unit (VDU). It is extremely flexible and convenient for operators to select and to control the system display on the screen. However, a high degree of digitalization has some risks. For example, in nuclear power plants, failures in the instrumentation and control devices could stop the operation of the plant. Human factors engineering (HFE) approaches would be a manner to solve this problem. Under HFE considerations, there exists 'population stereotype' for operation. That is, the operator is used to operating a specific display on the specific VDU for operation. Under emergency conditions, there is possibility that the operator will response with this habit population stereotype, and not be aware that the current situation has already changed. Accordingly, the advanced nuclear power plant should establish the MCR VDU configuration plan to meet the consistent teamwork goal under normal operation, transient and accident conditions. On the other hand, the advanced nuclear power plant should establish the human factors verification and validation plan of the MCR VDU configuration to verify and validate the configuration of the MCR VDUs, and to ensure that the MCR VDU configuration allows the operator shift to meet the HFE consideration and the consistent teamwork goal under normal operation, transient and accident conditions. This paper is one of the HF V V plans of the MCR VDU configuration of the advanced nuclear power plant. The purpose of this study is to confirm whether the VDU configuration meets the human factors principles and the consistent

  20. A proof-of-concept implementation of a unit-based advanced practice registered nurse (APRN) role: structural empowerment, role clarity and team effectiveness.

    Science.gov (United States)

    Feistritzer, Nancye R; Jones, Pam O

    2014-03-01

    The quest for decreased cost of care and improved outcomes has created the need for highly effective clinical roles and teams. This article describes the role of a unit-based advanced practice registered nurse (APRN) within a proof-of-concept implementation of a new care delivery model, the Vanderbilt Anticipatory Care Team. Role clarity is central to both structural empowerment of the APRN and team effectiveness. A modified PeaceHealth Team Development Measure tool measured baseline role clarity as a component of overall team effectiveness. A role description for the unit-based APRN based on a comprehensive assessment of the proof-of-concept unit is provided.

  1. Advancing strategic environmental assessment in the offshore oil and gas sector: Lessons from Norway, Canada, and the United Kingdom

    Energy Technology Data Exchange (ETDEWEB)

    Fidler, Courtney, E-mail: crfidler@gmail.com [Department of Geography and Planning, University of Saskatchewan, 117 Science Place, Saskatoon, Saskatchewan, S7N 5A5 (Canada); Noble, Bram, E-mail: b.noble@usask.ca [Department of Geography and Planning, School of Environment and Sustainability, University of Saskatchewan, 117 Science Place, Saskatoon, Saskatchewan, S7N 5A5 (Canada)

    2012-04-15

    Abstract: Strategic environmental assessment (SEA) for offshore oil and gas planning and development is utilized in select international jurisdictions, but the sector has received limited attention in the SEA literature. While the potential benefits of and rationale for SEA are well argued, there have been few empirical studies of SEA processes for the offshore sector. Hence, little is known about the efficacy of SEA offshore, in particular its influence on planning and development decisions. This paper examines SEA practice and influence in three international offshore systems: Norway, Atlantic Canada and the United Kingdom, with the intent to identify the challenges, lessons and opportunities for advancing SEA in offshore planning and impact assessment. Results demonstrate that SEA can help inform and improve the efficacy and efficiency of project-based assessment in the offshore sector, however weak coordination between higher and lower tiers limit SEA's ability to influence planning and development decisions in a broad regional environmental and socioeconomic context. - Highlights: Black-Right-Pointing-Pointer SEA can inform and improve the efficacy and efficiency of project EA offshore Black-Right-Pointing-Pointer Scope and deliverables of SEA offshore often differ from stakeholder expectations Black-Right-Pointing-Pointer Considerable variability in influence of SEA output beyond licensing decisions Black-Right-Pointing-Pointer Sector-based SEA offshore is often too restrictive to generate expected benefits.

  2. Quality of life assessment in advanced cancer patients treated at home, an inpatient unit, and a day care center

    Directory of Open Access Journals (Sweden)

    Leppert W

    2014-05-01

    Full Text Available Wojciech Leppert,1 Mikolaj Majkowicz,2 Maria Forycka,1 Eleonora Mess,3 Agata Zdun-Ryzewska2 1Department of Palliative Medicine, Poznan University of Medical Sciences, Poznan, Poland; 2Department of Quality of Life Research, Gdansk Medical University, Gdansk, Poland; 3Palliative Care Nursing Department, Wroclaw Medical University, Wroclaw, Poland Aim of the study: To assess quality of life (QoL in cancer patients treated at home, at an in-patient palliative care unit (PCU, and at a day care center (DCC. Patients and methods: QoL was assessed in advanced cancer patients at baseline and after 7 days of symptomatic treatment using the European Organization for Research and Treatment of Cancer Quality of Life Questionnaire-Core 15-Palliative Care (EORTC QLQ-C15-PAL, the Edmonton Symptom Assessment System (ESAS, and the Karnofsky Performance Status (KPS scale. Results: A total of 129 patients completed the study, with 51 patients treated at home, 51 patients treated at the PCU, and 27 patients at DCC. In the EORTC QLQ-C15-PAL, improvement in functional and symptom scales was observed except in physical functioning and fatigue levels; patients at DCC had a better physical functioning, global QoL, appetite, and fatigue levels. In the ESAS, improvement in all items was found except for drowsiness levels, which was stable in patients treated at DCC and deteriorated in home and PCU patients. Higher activity, better appetite and well-being, and less drowsiness were observed in patients treated at DCC. KPS was better in DCC patients compared to those treated at home and at the PCU; the latter group deteriorated. Conclusions: QoL improved in all patient groups, with better results in DCC patients and similar scores in those staying at home and at the PCU. Along with clinical assessment, baseline age, KPS, physical and emotional functioning may be considered when assigning patients to care at a DCC, PCU, or at home. Keywords: oncology, patient care

  3. Spacesuit Water Membrane Evaporator; An Enhanced Evaporative Cooling System for the Advanced Extravehicular Mobility Unit Portable Life Support System

    Science.gov (United States)

    Bue, Grant C.; Makinen, Janice V.; Miller, Sean; Campbell, Colin; Lynch, Bill; Vogel, Matt; Craft, Jesse; Wilkes, Robert; Kuehnel, Eric

    2014-01-01

    Development of the Advanced Extravehicular Mobility Unit (AEMU) portable life support subsystem (PLSS) is currently under way at NASA Johnson Space Center. The AEMU PLSS features a new evaporative cooling system, the Generation 4 Spacesuit Water Membrane Evaporator (Gen4 SWME). The SWME offers several advantages when compared with prior crewmember cooling technologies, including the ability to reject heat at increased atmospheric pressures, reduced loop infrastructure, and higher tolerance to fouling. Like its predecessors, Gen4 SWME provides nominal crew member and electronics cooling by flowing water through porous hollow fibers. Water vapor escapes through the hollow fiber pores, thereby cooling the liquid water that remains inside of the fibers. This cooled water is then recirculated to remove heat from the crew member and PLSS electronics. Test results from the backup cooling system which is based on a similar design and the subject of a companion paper, suggested that further volume reductions could be achieved through fiber density optimization. Testing was performed with four fiber bundle configurations ranging from 35,850 fibers to 41,180 fibers. The optimal configuration reduced the Gen4 SWME envelope volume by 15% from that of Gen3 while dramatically increasing the performance margin of the system. A rectangular block design was chosen over the Gen3 cylindrical design, for packaging configurations within the AEMU PLSS envelope. Several important innovations were made in the redesign of the backpressure valve which is used to control evaporation. A twin-port pivot concept was selected from among three low profile valve designs for superior robustness, control and packaging. The backpressure valve motor, the thermal control valve, delta pressure sensors and temperature sensors were incorporated into the manifold endcaps, also for packaging considerations. Flight-like materials including a titanium housing were used for all components. Performance testing

  4. Double-Blind, Placebo-Controlled Pilot Study of Processed Ultra Emu Oil Versus Placebo in the Prevention of Radiation Dermatitis

    Energy Technology Data Exchange (ETDEWEB)

    Rollmann, Denise C. [Department of Radiation Oncology, Mayo Clinic, Rochester, Minnesota (United States); Novotny, Paul J. [Division of Biomedical Informatics and Biostatistics, Mayo Clinic, Rochester, Minnesota (United States); Petersen, Ivy A.; Garces, Yolanda I.; Bauer, Heather J.; Yan, Elizabeth S. [Department of Radiation Oncology, Mayo Clinic, Rochester, Minnesota (United States); Wahner-Roedler, Dietlind; Vincent, Ann [Department of General Internal Medicine, Mayo Clinic, Rochester, Minnesota (United States); Sloan, Jeff A. [Division of Biomedical Informatics and Biostatistics, Mayo Clinic, Rochester, Minnesota (United States); Issa Laack, Nadia N., E-mail: laack.nadia@mayo.edu [Department of Radiation Oncology, Mayo Clinic, Rochester, Minnesota (United States)

    2015-07-01

    Purpose: The purpose of this single-institution pilot study was to evaluate the feasibility and safety of an oil-based skin agent, Ultra Emu Oil, on skin-related toxicity in patients undergoing radiation therapy to the breast or chest wall. Methods and Materials: Patients were randomized 2:1 in a double-blind fashion and were instructed to apply processed Ultra Emu Oil or placebo (cottonseed oil) twice daily during the course of radiation therapy. The oils were applied before the third fraction and continued for 6 weeks after completion of treatment. The primary endpoint was the area under the curve (AUC) of Skindex-16 scale scores over time. Secondary outcomes included maximum grade of radiation dermatitis using the Common Terminology Criteria (CTC) for Adverse Events (CTCAE 3.0), the Skin Toxicity Assessment Tool, quality of life (QOL) measured by Linear Analogue Self-Assessment, and a symptom experience diary (SED). Results: In all, 42 of 45 patients completed the study and were evaluable. The median times to peak rash, skin redness, peeling, and skin swelling were weeks 6, 6, 7, and 7, respectively as measured by the SED. The Skindex AUC scores tended to be lower in emu oil patients than in placebo patients (mean total AUC 7.2 vs 10.4, respectively). This trend was also seen in all the Skindex subdomains. The overall QOL was slightly better in the emu oil group but remained stable throughout the study for both arms. Peak CTC toxicity occurred at week 6. Patients using emu oil appeared slightly worse on maximum CTC grade, but the difference was not significant. Conclusions: This pilot study confirmed the safety of oil-based skin treatments during radiation therapy and suggests a trend for reduced skin toxicity for patients receiving emu oil. A larger study is needed to evaluate the efficacy of emu oil in reducing radiation dermatitis in patients receiving breast radiation.

  5. Development of Emu oil-loaded PCL/collagen bioactive nanofibers for proliferation and stemness preservation of human adipose-derived stem cells: possible application in regenerative medicine.

    Science.gov (United States)

    Nejati-Koshki, Kazem; Pilehvar-Soltanahmadi, Younes; Alizadeh, Effat; Ebrahimi-Kalan, Abbas; Mortazavi, Yousef; Zarghami, Nosratollah

    2017-08-10

    Adipose tissue-derived stem cells (ASCs) are promising candidate in stem cell therapies, and maintaining their stemness potential is vital to achieve effective treatment. Natural-based scaffolds have been recently attracted increasing attention in nanomedicine and drug delivery. In the present study, a polymeric nanofibrous scaffold was developed based on the polycaprolactone/Collagen (PCL/Coll) containing Emu oil as a bioactive material to induce the proliferation of ASCs, while simultaneously preserving the stemness property of those cells. Fabrication of the electrospun Emu oil-loaded PCL/Coll nanofibers was confirmed by using FE-SEM, FTIR, and tensile test. ASCs were seeded on two types of nanofibers (PCL/Coll and Emu oil-loaded PCL/Coll) and their proliferation, cell cycle progression, and stemness gene expressions were evaluated using MTT, propidium iodide staining, and qPCR during 14 days, respectively. The results indicated that ASCs displayed improved adhesion capacity with the higher rates of bioactivity and proliferation on the Emu oil-loaded nanofibers than the other groups. The proliferation capacity of ASCs on Emu oil-loaded PCL/Coll nanofibers was further confirmed by the cell cycle progression analysis. It was also found that Emu oil-loaded nanofibers significantly up-regulated the expression of stemness markers including sox-2, nanog, oct4, klf4, and c-Myc. The results demonstrated that the nanofibers containing Emu oil can reinforce the cell adhesion and enhance ASCs proliferation while preserving their stemness; therefore, using scaffolds containing natural products may have a great potential to enhance the in vitro expansion capacity of ASCs in the field of stem cell therapy and regenerative medicine.

  6. Harrod – Balassa – Samuelson effect and the role of distribution sector: an empirical case study of Serbia and EMU

    Directory of Open Access Journals (Sweden)

    Predrag Petrović

    2012-06-01

    Full Text Available This research aims to test the functionality of the standard and the modified HBS model, with the intention to discover whether sectoral differences in labor productivity affect the dinar/euro real exchange rate. The first part of the analysis is based on the standard HBS model, which mathematically formalizes the dependence of the real exchange rate on the difference in the relative labor productivity in the open sector between Serbia and the EMU. The second part of the research relies on a modified version of the HBS model which differs from the standard HBS model since the effect of the distribution sector is separately analyzed. The empirical testing of both models was performed by applying the Johansen and the Engle-Grangertests. The results obtained by analyzing the standard HBS model indicates that there is no reliable evidence based on which it can be concluded that either the difference in the relative labor productivity in the open sector between Serbia and the EMU translates onto the difference in the relative prices of non-tradable goods or that thedifference in prices affects the real exchange rate of the dinar against the euro. Furthermore, the analysis of the modified HBS model does not affect the previous results. Based on these findings, it can be concluded that the real euro/dinar exchange rate is not determined solely by sectoral differences in labor productivity,and that in future perspective Serbia will not have to choose between the dynamic economic growth and the membership in the EMU.

  7. Forecasting the EMU inflation rate: Linear econometric vs. non-linear computational models using genetic neural fuzzy systems

    DEFF Research Database (Denmark)

    Kooths, Stefan; Mitze, Timo Friedel; Ringhut, Eric

    2004-01-01

    This paper compares the predictive power of linear econometric and non-linear computational models for forecasting the inflation rate in the European Monetary Union (EMU). Various models of both types are developed using different monetary and real activity indicators. They are compared according...... to a battery of parametric and non-parametric test statistics to measure their performance in one- and four-step ahead forecasts of quarterly data. Using genetic-neural fuzzy systems we find the computational approach superior to some degree and show how to combine both techniques successfully....

  8. Hypnosis Before Wake-up Call?! The Revival of Sovereign Credit Risk Perception in the EMU-Crisis

    OpenAIRE

    Ingo G. Bordon; Schmid, Kai D.; Schmidt, Michael

    2014-01-01

    This paper qualifies the view of pronounced overpricing of sovereign bonds for the so-called GIIPS countries during the financial crisis. We use annual data for 21 OECD countries from 1980 to 2012. As opposed to related studies, our data set allows us to contrast the pricing of macroeconomic fundamentals between three distinct phases: The period before the signing of the Maastricht treaty, the EMU convergence era, and the financial crisis. In detail, we find: (i) Since the 1980s the role of p...

  9. 合成系统提前升温的可行性分析%Feasibility Analysis of Ammonia Synthesis Unit Temperature Increasing in Advance

    Institute of Scientific and Technical Information of China (English)

    田红; 曹超; 董金国

    2014-01-01

    根据该厂氨合成系统工艺流程、系统资源情况,介绍氨合成系统两种可能的提前升温方案,并分析两种提前升温方案各自的利弊。%Based on the ammonia synthesis system process and resources ,describe two programs of increasing ammonia synthesis unit temperature in advance ,and analyze advantages and disadvantages .

  10. A fuel cell energy storage system concept for the Space Station Freedom Extravehicular Mobility Unit

    Science.gov (United States)

    Adlhart, Otto J.; Rosso, Matthew J., Jr.; Marmolejo, Jose

    1989-01-01

    An update is given on work to design and build a Fuel Cell Energy Storage System (FCESS) bench-tested unit for the Space Station Freedom Extravehicular Mobility Unit (EMU). Fueled by oxygen and hydride-stored hydrogen, the FCESS is being considered as an alternative to the EMU zinc-silver oxide battery. Superior cycle life and quick recharge are the main attributes of FCESS. The design and performance of a nonventing, 28 V, 34 Ahr system with 7 amp rating are discussed.

  11. Free movement of capital in the context of the implementation of monetary policy in EMU and the European Union

    Directory of Open Access Journals (Sweden)

    Majlinda Tafaj

    2015-11-01

    Full Text Available Free movement of capital has been one of the main objectives of Article 3 of the EC Treaty, as part of the development of the common market. Nowadays, the domestic market and almost all of other freedoms (eg. workers, goods and services depends on the freedom of movement of capital. Unlike other freedoms, freedom of movement is more liberalized. European investment, cross-border transfers, bank accounts, purchases and authorization of purchases of real estate, inheritance etc., are included in the free movement of capital. Free movement of capital has lost somehow its sense with the entry into force of EMU and the introduction of the Euro. This liberalization aimed at realizing a collaboration and coordination of economic policies and to some extent even political at the higher levels of the central banks where the fulfillment of the convergence criteria (four criteria, was a prerequisite for a country to adopt the single currency. But EMU and its implementation in the third phase brought significant consequences with regard to the institutional, economic and monetary policy having an impact directly on the free movement of capital in the EU, which will be the object of analysis in this paper.

  12. An evaluation of known remaining oil resources in the United States. Appendix, Project on Advanced Oil Recovery and the States

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-01

    This volume contains appendices for the following: Overview of improved oil recovery methods (enhanced oil recovery methods and advanced secondary recovery methods); Benefits of improved oil recovery, selected data for the analyzed states; and List of TORIS fields and reservoirs.

  13. Competitiveness, Emu and Cohesion Experiences in the Past (2000–2013; Assessment of the Present (2014–2020 and Lessons for the Future (2020 and Beyond

    Directory of Open Access Journals (Sweden)

    Molle Willem

    2014-12-01

    Full Text Available The European Union has adopted several strategies to cope with a set of inter-related problems. The best known is the Europe 2020 strategy with its focus on smart, sustainable and inclusive growth. Another is fostering balanced macro growth via a strengthening of the EMU. Finally the cohesion policy has to cope with spatial unbalances. The objective of this paper is to highlight the main issues in three policy fields: competitiveness, EMU and cohesion.1 Two scenarios for post 2020 development are described, which show the need for further strengthening of EU policies and of the quality of government at all levels.

  14. 高速列车牵引供电系统建模及短时断电工况仿真%Modeling and simulation at temporary power-off state of EMU traction driver system

    Institute of Scientific and Technical Information of China (English)

    谢舸; 卢琴芬

    2011-01-01

    In order to research the performance of electric multiple unit (EMU) traction driver system at different states, according to the actual structure and parameter of CRH2 EMU, the simulation model of its traction driver system was established by Matlab/Simulink software. In this model, the transient current control and indirect rotor magnetic field orientation vector control strategy were adopted by traction motor, and the sine pulse width midulation(SPWM) and space vector pulse width modulation(SVPWM) modulate method were used by traction converter. On this basis, operation performance of traction converter was simulated and analyzed under different train speed when the pantograph temporarily disconnect to grid. The simulation results provide a reference for the actual design and performance analysis of traction converter.%为研究不同丁况下高速列车牵引供电系统的工作状态和性能,根据CRH2型高速列车牵引供电系统的实际结构与参数,采用Matlab/Simulink软件建立了整个系统的仿真模型,模型中牵引变流器采用正弦脉宽渊制(SPWM)和空间矢量脉宽调制(SVPWM)两种方式,牵引电机采用适用于高速列车的瞬态电流控制和转子磁场定向矢量控制策略.基于此模型,仿真并分析了列车在不同运行速度下.受电弓短时断电时牵引变流器的性能.分析结果为列车牵引变流器的实际设计和性能分析提供了参考.

  15. What Are the Factors Influencing Implementation of Advanced Access in Family Medicine Units? A Cross-Case Comparison of Four Early Adopters in Quebec.

    Science.gov (United States)

    Abou Malham, Sabina; Touati, Nassera; Maillet, Lara; Gaboury, Isabelle; Loignon, Christine; Breton, Mylaine

    2017-01-01

    Advanced access is an organizational model that has shown promise in improving timely access to primary care. In Quebec, it has recently been introduced in several family medicine units (FMUs) with a teaching mission. The objectives of this paper are to analyze the principles of advanced access implemented in FMUs and to identify which factors influenced their implementation. A multiple case study of four purposefully selected FMUs was conducted. Data included document analysis and 40 semistructured interviews with health professionals and staff. Cross-case comparison and thematic analysis were performed. Three out of four FMUs implemented the key principles of advanced access at various levels. One scheduling pattern was observed: 90% of open appointment slots over three- to four-week periods and 10% of prebooked appointments. Structural and organizational factors facilitated the implementation: training of staff to support change, collective leadership, and openness to change. Conversely, family physicians practicing in multiple clinical settings, lack of team resources, turnover of clerical staff, rotation of medical residents, and management capacity were reported as major barriers to implementing the model. Our results call for multilevel implementation strategies to improve the design of the advanced access model in academic teaching settings.

  16. What Are the Factors Influencing Implementation of Advanced Access in Family Medicine Units? A Cross-Case Comparison of Four Early Adopters in Quebec

    Directory of Open Access Journals (Sweden)

    Sabina Abou Malham

    2017-01-01

    Full Text Available Introduction. Advanced access is an organizational model that has shown promise in improving timely access to primary care. In Quebec, it has recently been introduced in several family medicine units (FMUs with a teaching mission. The objectives of this paper are to analyze the principles of advanced access implemented in FMUs and to identify which factors influenced their implementation. Methods. A multiple case study of four purposefully selected FMUs was conducted. Data included document analysis and 40 semistructured interviews with health professionals and staff. Cross-case comparison and thematic analysis were performed. Results. Three out of four FMUs implemented the key principles of advanced access at various levels. One scheduling pattern was observed: 90% of open appointment slots over three- to four-week periods and 10% of prebooked appointments. Structural and organizational factors facilitated the implementation: training of staff to support change, collective leadership, and openness to change. Conversely, family physicians practicing in multiple clinical settings, lack of team resources, turnover of clerical staff, rotation of medical residents, and management capacity were reported as major barriers to implementing the model. Conclusion. Our results call for multilevel implementation strategies to improve the design of the advanced access model in academic teaching settings.

  17. Bridging the Gap 10 Years Later: A Tool and Technique to Analyze and Evaluate Advanced Academic Curricular Units

    Science.gov (United States)

    Beasley, Jennifer G.; Briggs, Christine; Pennington, Leighann

    2017-01-01

    The need for a shared vision concerning exemplary curricula for academically advanced learners must be a priority in the field of education. With the advent of the Common Core State Standards adoption in many states, a new conversation has been ignited over meeting the needs of students with gifts and talents for whom the "standard"…

  18. Effect of Advanced Location Methods on Search and Rescue Duration for General Aviation Aircraft Accidents in the Contiguous United States

    Science.gov (United States)

    Wallace, Ryan J.

    2013-01-01

    The purpose of this study was to determine the impact of advanced search and rescue devices and techniques on search duration for general aviation aircraft crashes. The study assessed three categories of emergency locator transmitters, including 121.5 MHz, 406 MHz, and GPS-Assisted 406 MHz devices. The impact of the COSPAS-SARSAT organization…

  19. Bridging the Gap 10 Years Later: A Tool and Technique to Analyze and Evaluate Advanced Academic Curricular Units

    Science.gov (United States)

    Beasley, Jennifer G.; Briggs, Christine; Pennington, Leighann

    2017-01-01

    The need for a shared vision concerning exemplary curricula for academically advanced learners must be a priority in the field of education. With the advent of the Common Core State Standards adoption in many states, a new conversation has been ignited over meeting the needs of students with gifts and talents for whom the "standard"…

  20. Economic impact of healthcare resource utilisation patterns among patients diagnosed with advanced melanoma in the United Kingdom, Italy, and France: results from a retrospective, longitudinal survey (MELODY study).

    Science.gov (United States)

    Johnston, K; Levy, A R; Lorigan, P; Maio, M; Lebbe, C; Middleton, M; Testori, A; Bédane, C; Konto, C; Dueymes, A; Sbarigia, U; van Baardewijk, M

    2012-09-01

    To describe patterns of healthcare resource utilisation and associated costs for patients with advanced melanoma in the United Kingdom (UK), Italy, and France. For patients receiving systemic treatment, or supportive care, data describing hospitalisations, hospice care, and outpatient visits were retrieved retrospectively from advanced disease diagnosis as part of a multicountry observational study. Costs were estimated by multiplying utilisation level by unit cost. In an exploratory analysis, costs were compared between individuals who died within one year of initiating first-line treatment (short-term survivors) and those with ≥ 1 year follow-up (long-term survivors). Hospitalisation costs were highest in France (€6262 per-person compared with €3225 in the UK and €2486 in Italy), reflecting higher rates of hospitalisation. In contrast, outpatient costs were highest in the UK (€782 per-person, compared with €115 in France and €72 in Italy), reflecting the highest rate and frequency of outpatient visits and the highest cost per visit. Hospitalisation rates were consistently higher during supportive care compared with systemic therapy. Roughly one-third of patients entered clinical trials and were not included in the analysis. In exploratory analysis, total costs were generally higher for long-term survivors, but monthly per-patient costs were generally lower for long-term survivors, consistent with a hypothesis that resource utilisation and costs do not necessarily increase proportionally with extended survival. Total costs associated with resource utilisation for advanced melanoma patients varied across countries. Overall cost differences were due to differences in frequency and intensity of utilisation patterns and variation in unit costs of health resources. Copyright © 2012. Published by Elsevier Ltd.

  1. Integrated Advanced Microwave Sounding Unit-A (AMSU-A). As-Designed Parts List: Electrical, Electronic, and Electromechanical (EEE) As-Built Parts List for the AMSU-A Instruments

    Science.gov (United States)

    2000-01-01

    This is the As-Designed Parts List, Electrical, Electronic, and Electromechanical (EEE) As-Built Parts Lists For The AMSU-A Instruments, for the Integrated Advanced Microwave Sounding Unit-A (AMSU-A).

  2. Meteorological Satellites (METSAT) and Earth Observing System (EOS) Advanced Microwave Sounding Unit-A (AMSU-A) Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL)

    Science.gov (United States)

    1996-01-01

    This Failure Modes and Effects Analysis (FMEA) is for the Advanced Microwave Sounding Unit-A (AMSU-A) instruments that are being designed and manufactured for the Meteorological Satellites Project (METSAT) and the Earth Observing System (EOS) integrated programs. The FMEA analyzes the design of the METSAT and EOS instruments as they currently exist. This FMEA is intended to identify METSAT and EOS failure modes and their effect on spacecraft-instrument and instrument-component interfaces. The prime objective of this FMEA is to identify potential catastrophic and critical failures so that susceptibility to the failures and their effects can be eliminated from the METSAT/EOS instruments.

  3. Theoretical Estimates of Integrated Sachs-Wolfe Effect Detection through EMU-ASKAP Survey with Confusion, Position Uncertainty, Shot Noise and SNR analysis

    CERN Document Server

    Rahman, Syed Faisal ur

    2014-01-01

    The paper discusses ISW estimates through EMU-ASKAP survey. The main ideas this paper covers include: 1- Discussion on source distribution, confusion, position accuracy and shotnoise (with discussion focusing on SN ratios). 2- Selection of maximum redshift and maximum 'l' ranges in relation with SN ratios. Note: Complete abstract is available in the document.

  4. Hydrothermal alteration maps of the central and southern Basin and Range province of the United States compiled from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data

    Science.gov (United States)

    Mars, John L.

    2013-01-01

    Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data and Interactive Data Language (IDL) logical operator algorithms were used to map hydrothermally altered rocks in the central and southern parts of the Basin and Range province of the United States. The hydrothermally altered rocks mapped in this study include (1) hydrothermal silica-rich rocks (hydrous quartz, chalcedony, opal, and amorphous silica), (2) propylitic rocks (calcite-dolomite and epidote-chlorite mapped as separate mineral groups), (3) argillic rocks (alunite-pyrophyllite-kaolinite), and (4) phyllic rocks (sericite-muscovite). A series of hydrothermal alteration maps, which identify the potential locations of hydrothermal silica-rich, propylitic, argillic, and phyllic rocks on Landsat Thematic Mapper (TM) band 7 orthorectified images, and geographic information systems shape files of hydrothermal alteration units are provided in this study.

  5. Availability of advanced foreign energy conversion and conservation technology for use in the United States. Biennial report

    Energy Technology Data Exchange (ETDEWEB)

    Straus, R W; Thurman, R S; Carsey, J N; Fujishima, C; Hammel, J; Dietrich, P; Pfeil, R; Bottomley, K

    1978-12-01

    The assignment by DOE requested Galaxy to, Review and evaluate all field data and to define areas where foreign work is ready to be implemented by US; areas where US work might be dropped since foreign R and D is more advanced; areas where foreign R and D indicate sufficient promise for the US to initiate work in; areas where cooperative R and D ventures or licensing agreements might prove beneficial, etc. The specific technologies to be investigated by Galaxy were set forth in Tasks I and V of the contract as follows: Task I: (A) waste heat utilization, (B) advanced cycles, (C) component reliability and efficiency, (D) heat transfer, and (E) combustion and materials; Task V: (A) controls and process efficiency; (B) materials and fabrication; (C) components and heat engines; (D) thermodynamics and heat transfer; (E) fuel cells; (F) combustion and alternate fuels; and (G) heat utilization, planning and analysis. The foreign technology is briefly identified within the areas set forth. (WHK)

  6. Advancement of a soil parameters geodatabase for the modeling assessment of conservation practice outcomes in the United States

    Science.gov (United States)

    US-ModSoilParms-TEMPLE is a database composed of a set of geographic databases functionally storing soil-spatial units and soil hydraulic, physical, and chemical parameters for three agriculture management simulation models, SWAT, APEX, and ALMANAC. This paper introduces the updated US-ModSoilParms-...

  7. The History of Geriatric Anesthesia in the United States and the Society for the Advancement of Geriatric Anesthesia.

    Science.gov (United States)

    Rooke, G Alec

    2015-09-01

    Creation of the American Society of Anesthesiologists Committee on Geriatric Anesthesia provided an opportunity for individuals to interact, strategize, and work with medical organizations outside of anesthesiology. These opportunities expanded with creation of the Society for the Advancement of Geriatric Anesthesia. The American Geriatrics Society provided a major boost when they realized it was important for surgical and related specialties to take an active role in the care of older patients. From this have come educational grants to improve residency training and establishment of a major research grant program now managed by the National Institutes of Health. Nevertheless, for improved care of the older patient, the level of involvement has to increase.

  8. Utility Values for Advanced Soft Tissue Sarcoma Health States from the General Public in the United Kingdom

    Directory of Open Access Journals (Sweden)

    Julian F. Guest

    2013-01-01

    Full Text Available Soft tissue sarcomas are a rare type of cancer generally treated with palliative chemotherapy when in the advanced stage. There is a lack of published health utility data for locally advanced “inoperable”/metastatic disease (ASTS, essential for calculating the cost-effectiveness of current and future treatments. This study estimated time trade-off (TTO and standard gamble (SG preference values associated with four ASTS health states (progressive disease, stable disease, partial response, complete response among members of the general public in the UK (n=207. The four health states were associated with decreases in preference values from full health. Complete response was the most preferred health state (mean utility of 0.60 using TTO. The second most preferred health state was partial response followed by stable disease (mean utilities were 0.51 and 0.43, respectively, using TTO. The least preferred health state was progressive disease (mean utility of 0.30 using TTO. The utility value for each state was significantly different from one another (P<0.001. This study demonstrated and quantified the impact that different treatment responses may have on the health-related quality of life of patients with ASTS.

  9. Recent advances in TeleStroke: a systematic review on applications in prehospital management and Stroke Unit treatment or TeleStroke networking in developing countries.

    Science.gov (United States)

    Hubert, Gordian J; Müller-Barna, Peter; Audebert, Heinrich J

    2014-12-01

    TeleStroke has become an increasing means to overcome shortage of stroke expertise in underserved areas. This rapidly growing field has triggered a large amount of publications in recent years. We aimed to analyze recent advances in the field of telemedicine for acute stroke, with main focus on prehospital management, Stroke Unit treatment and network implementations in developing countries. Out of 260 articles, 25 were selected for this systematic review: 9 regarding prehospital management, 14 regarding Stroke Unit treatment and 2 describing a network in developing countries. Prehospital management showed that stroke recognition can start at the dispatch emergency call, important clinical information can be electronically transmitted to hospitals before admission and even acute treatment such as thrombolysis can be initiated in the prehospital field if ambulances are equipped with CT scan and point-of-care laboratory. Articles on remote clinical examination, telemedical imaging interpretation, trial recruitment and cost-effectiveness described various aspects of Stroke Unit treatment within TeleStroke networks, underlining reliability, safety and cost savings of these systems of care. Only one network was described to have been implemented in a developing/emerging nation. TeleStroke is a growing field expanding its focus to a broader spectrum of stroke care. It still seems to be underused, particularly in developing countries.

  10. Debate - The Trafficking Protocol has Advanced the Global Movement against Human Exploitation: The case of the United Kingdom

    Directory of Open Access Journals (Sweden)

    Caroline Parkes

    2015-04-01

    Full Text Available When politicians, responding to public campaigns focused on human trafficking, make bold and over-emotive statements, invoking William Wilberforce and the pressing need to lead the global fight against slavery, the Trafficking Protocol,[1] proves its worth.  Insulated from national political rhetoric, international treaties, be it the Trafficking Protocol or regional instruments, provide an invaluable structure for governments’ national legislative responses to human trafficking. As the United Kingdom’s (UK Solicitor General noted,[2] The UK’s legal framework has been directly influenced by UN [United Nations] and EU [European Union] Conventions and Directives (emphasis added … [and] The ‘Palermo Protocol’ continues to shape the UK’s response to human trafficking and in particular the care and support afforded to identified human trafficking victims. [1] In full: Protocol to Prevent, Suppress and Punish Trafficking in Persons, Especially Women and Children. [2] Speech, Solicitor General, Oliver Heald QC MP, ‘Prosecuting human trafficking and slavery: The law and the UK response’, UK Government, 12 October 2012, retrieved 6 January 2015 https://www.gov.uk/government/speeches/prosecuting-human-trafficking-and-slavery-the-law-and-the-uk-response

  11. Materials Assessment of Components of the Extravehicular Mobility Unit

    Science.gov (United States)

    Olivas, John D.; Barrera, Enrique V.

    1996-01-01

    Current research interests for Extravehicular Mobility Unit (EMU) design and development are directed toward enhancements of the Shuttle EMU, implementation of the Mark 3 technology for Shuttle applications, and development of a next generation suit (the X suit) which has applications for prolonged space flight, longer extravehicular activity (EVA), and Moon and Mars missions. In this research project two principal components of the EMU were studied from the vantage point of the materials and their design criteria. An investigation of the flexible materials which make up the lay-up of materials for abrasion and tear protection, thermal insulation, pressure restrain, etc. was initiated. A central focus was on the thermal insulation. A vacuum apparatus for measuring the flexibility of the materials was built to access their durability in vacuum. Plans are to include a Residual Gas Analyzer on the vacuum chamber to measure volatiles during the durability testing. These tests will more accurately simulate space conditions and provide information which has not been available on the materials currently used on the EMU. Durability testing of the aluminized mylar with a nylon scrim showed that the material strength varied in the machine and transverse directions. Study of components of the EMU also included a study of the EMU Bearing Assemblies as to materials selection, engineered materials, use of coatings and flammability issues. A comprehensive analysis of the performance of the current design, which is a stainless steel assembly, was conducted and use of titanium alloys or engineered alloy systems and coatings was investigated. The friction and wear properties are of interest as are the general manufacturing costs. Recognizing that the bearing assembly is subject to an oxygen environment, all currently used materials as well as titanium and engineered alloys were evaluated as to their flammability. An aim of the project is to provide weight reduction since bearing

  12. Dynamic Modeling of Learning in Emerging Energy Industries: The Example of Advanced Biofuels in the United States: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Vimmerstedt, Laura J.; Bush, Brian W.; Peterson, Steven O.

    2015-09-03

    This paper (and its supplemental model) presents novel approaches to modeling interactions and related policies among investment, production, and learning in an emerging competitive industry. New biomass-to-biofuels pathways are being developed and commercialized to support goals for U.S. advanced biofuel use, such as those in the Energy Independence and Security Act of 2007. We explore the impact of learning rates and techno-economics in a learning model excerpted from the Biomass Scenario Model (BSM), developed by the U.S. Department of Energy and the National Renewable Energy Laboratory to explore the impact of biofuel policy on the evolution of the biofuels industry. The BSM integrates investment, production, and learning among competing biofuel conversion options that are at different stages of industrial development. We explain the novel methods used to simulate the impact of differing assumptions about mature industry techno-economics and about learning rates while accounting for the different maturity levels of various conversion pathways. A sensitivity study shows that the parameters studied (fixed capital investment, process yield, progress ratios, and pre-commercial investment) exhibit highly interactive effects, and the system, as modeled, tends toward market dominance of a single pathway due to competition and learning dynamics.

  13. Dynamic Modeling of Learning in Emerging Energy Industries: The Example of Advanced Biofuels in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Vimmerstedt, Laura; Peterson, Steve; Bush, Brian

    2016-05-01

    This paper (and its supplemental model) presents novel approaches to modeling interactions and related policies among investment, production, and learning in an emerging competitive industry. New biomass-to-biofuels pathways are being developed and commercialized to support goals for U.S. advanced biofuel use, such as those in the Energy Independence and Security Act of 2007. We explore the impact of learning rates and techno-economics in a learning model excerpted from the Biomass Scenario Model (BSM), developed by the U.S. Department of Energy and the National Renewable Energy Laboratory to explore the impact of biofuel policy on the evolution of the biofuels industry. The BSM integrates investment, production, and learning among competing biofuel conversion options that are at different stages of industrial development. We explain the novel methods used to simulate the impact of differing assumptions about mature industry techno-economics and about learning rates while accounting for the different maturity levels of various conversion pathways. A sensitivity study shows that the parameters studied (fixed capital investment, process yield, progress ratios, and pre-commercial investment) exhibit highly interactive effects, and the system, as modeled, tends toward market dominance of a single pathway due to competition and learning dynamics.

  14. Materials considerations in the design of a metal-hydride heat pump for an advanced extravehicular mobility unit

    Science.gov (United States)

    Liebert, B. E.

    1986-01-01

    A metal-hydride heat pump (HHP) has been proposed to provide an advanced regenerable nonventing thermal sink for the liquid-cooled garment worn during an extravehicular activity (EVA). The conceptual design indicates that there is a potential for significant advantages over the one presently being used by shuttle crew personnel as well as those that have been proposed for future use with the space station. Compared to other heat pump designs, a HHP offers the potential for extended use with no electrical power requirements during the EVA. In addition, a reliable, compact design is possible due to the absence of moving parts other than high-reliability check valves. Because there are many subtleties in the properties of metal hydrides for heat pump applications, it is essential that a prototype hydride heat pump be constructed with the selected materials before a committment is made for the final design. Particular care must be given to the evaporator heat exchanger worn by the astronaut since the performance of hydride heat pumps is generally heat transfer limited.

  15. Integrated Advanced Microwave Sounding Unit-A (AMSU-A). As-Designed Parts List: Electrical, Electronic and Electromechanical (EEE) As-Designed Parts List

    Science.gov (United States)

    Lorenz, E.

    1999-01-01

    This report comprises the Electrical, Electronic, and Electromechanical (EEE) As Designed Parts List to be used in the Integrated Advanced Microwave Sounding Unit-A (AMSU-A) instrument. The purpose of the EEE As-Designed Parts List is to provide a listing of EEE parts identified for use on the Integrated AMSU-A. All EEE parts used on the AMSU-A must meet the parts control requirements as defined in the Parts Control Plan (POP). All part applications are reviewed by the Parts Control Board (PCB) and granted approval if POP requirements are met. The "As Designed Parts Lists" indicates PCB approval status, and thus also serves as the Program Approved Parts List.

  16. Search for High-Mass Resonances Decaying to e-mu in ppbar Collisions at $\\sqrt{s}$=1.96 TeV

    CERN Document Server

    Abulencia, A; Adelman, J; Affolder, T; Akimoto, T; Albrow, M G; Ambrose, D; Amerio, S; Amidei, D; Anastassov, A; Anikeev, K; Annovi, A; Antos, J; Aoki, M; Apollinari, G; Arguin, J F; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Azfar, F; Azzi-Bacchetta, P; Azzurri, P; Bacchetta, N; Bachacou, H; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Baroiant, S; Bartsch, V; Bauer, G; Bedeschi, F; Behari, S; Belforte, S; Bellettini, G; Bellinger, J; Belloni, A; Ben-Haim, E; Benjamin, D; Beretvas, A; Beringer, J; Berry, T; Bhatti, A; Binkley, M; Bisello, D; Blair, R E; Blocker, C; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bölla, G; Bolshov, A; Bortoletto, D; Boudreau, J; Boveia, A; Brau, B; Bromberg, C; Brubaker, E; Budagov, Yu A; Budd, H S; Budd, S; Burkett, K; Busetto, G; Bussey, P; Byrum, K L; Cabrera, S; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carlsmith, D; Carosi, R; Carron, S; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chapman, J; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, I; Cho, K; Chokheli, D; Chou, J P; Chu, P H; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Ciljak, M; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Coca, M; Compostella, G; Convery, M E; Conway, J; Cooper, B; Copic, K; Cordelli, M; Cortiana, G; Cresciolo, F; Cruz, A; Cuenca-Almenar, C; Cuevas-Maestro, J; Culbertson, R; Cyr, D; Da Ronco, S; D'Auria, S; D'Onofrio, M; Dagenhart, D; De Barbaro, P; De Cecco, S; Deisher, A; De Lentdecker, G; Dell'Orso, Mauro; Delli Paoli, F; Demers, S; Demortier, L; Deng, J; Deninno, M; De Pedis, D; Derwent, P F; Dionisi, C; Dittmann, J R; Di Turo, P; Dorr, C; Donati, S; Donega, M; Dong, P; Donini, J; Dorigo, T; Dube, S; Ebina, K; Efron, J; Ehlers, J; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, I; Fedorko, W T; Feild, R G; Feindt, M; Fernández, J P; Field, R; Flanagan, G; Flores-Castillo, L R; Foland, A; Forrester, S; Foster, G W; Franklin, M; Freeman, J C; Furic, I; Gallinaro, M; Galyardt, J; García, J E; García-Sciveres, M; Garfinkel, A F; Gay, C; Gerberich, H; Gerdes, D; Giagu, S; Giannetti, P; Gibson, A; Gibson, K; Ginsburg, C; Giokaris, N; Giolo, K; Giordani, M; Giromini, P; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D A; Gold, M; Goldschmidt, N; Goldstein, J; Gómez, G; Gómez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Gotra, Yu; Goulianos, K; Gresele, A; Griffiths, M; Grinstein, S; Grosso-Pilcher, C; Grundler, U; Guimarães da Costa, J; Gunay-Unalan, Z; Haber, C; Hahn, S R; Hahn, K; Halkiadakis, E; Hamilton, A; Han, B Y; Han, J Y; Handler, R; Happacher, F; Hara, K; Hare, M; Harper, S; Harr, R F; Harris, R M; Hatakeyama, K; Hauser, J; Hays, C; Heijboer, A; Heinemann, B; Heinrich, J; Herndon, M; Hidas, D; Hill, C S; Hirschbuehl, D; Höcker, A; Holloway, A; Hou, S; Houlden, M; Hsu, S C; Huffman, B T; Hughes, R E; Huston, J; Incandela, J R; Introzzi, G; Iori, M; Ishizawa, Y; Ivanov, A; Iyutin, B; James, E; Jang, D; Jayatilaka, B; Jeans, D; Jensen, H; Jeon, E J; Jindariani, S; Jones, M; Joo, K K; Jun, S Y; Junk, T R; Kamon, T; Kang, J; Karchin, P E; Kato, Y; Kemp, Y; Kephart, R; Kerzel, U; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, J E; Kim, M J; Kim, S B; Kim, S H; Kim, Y K; Kirsch, L; Klimenko, S; Klute, M; Knuteson, B; Ko, B R; Kobayashi, H; Kondo, K; Kong, D J; Konigsberg, J; Korytov, A; Kotwal, A V; Kovalev, A; Kraan, A C; Kraus, J; Kravchenko, I; Kreps, M; Kroll, J; Krumnack, N; Kruse, M; Krutelyov, V; Kuhlmann, S E; Kusakabe, Y; Kwang, S; Laasanen, A T; Lai, S; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; LeCompte, T; Lee, J; Lee, Y J; Lee, S W; Lefèvre, R; Leonardo, N; Leone, S; Levy, S; Lewis, J D; Lin, C; Lin, C S; Lindgren, M; Lipeles, E; Lister, A; Litvintsev, D O; Liu, T; Lockyer, N S; Loginov, A; Loreti, M; Loverre, P F; Lu, R S; Lucchesi, D; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; Lytken, E; Mack, P; MacQueen, D; Madrak, R; Maeshima, K; Mäki, T; Maksimovic, P; Malde, S; Manca, G; Margaroli, F; Marginean, R; Marino, C; Martin, A; Martin, V; Martínez, M; Maruyama, T; Matsunaga, H; Mattson, M E; Mazini, R; Mazzanti, P; McFarland, K S; McIntyre, P; McNulty, R; Mehta, A; Menzemer, S; Menzione, A; Merkel, P; Mesropian, C; Messina, A; Von der Mey, M; Miao, T; Miladinovic, N; Miles, J; Miller, R; Miller, J S; Mills, C; Milnik, M; Miquel, R; Mitra, A; Mitselmakher, G; Miyamoto, A; Moggi, N; Mohr, B; Moore, R; Morello, M; Movilla-Fernández, P A; Mülmenstädt, J; Mukherjee, A; Müller, T; Mumford, R; Murat, P; Nachtman, J; Naganoma, J; Nahn, S; Nakano, I; Napier, A; Naumov, D; Necula, V; Neu, C; Neubauer, M S; Nielsen, J; Nigmanov, T; Nodulman, L; Norniella, O; Nurse, E; Ogawa, T; Oh, S H; Oh, Y D; Okusawa, T; Oldeman, R; Orava, R; Österberg, K; Pagliarone, C; Palencia, E; Paoletti, R; Papadimitriou, V; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, Aldo L; Phillips, T J; Piacentino, G; Piedra, J; Pinera, L; Pitts, K; Plager, C; Pondrom, L; Portell, X; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Rakitine, A; Rappoccio, S; Ratnikov, F; Reisert, B; Rekovic, V; Van Remortel, N; Renton, P B; Rescigno, M; Richter, S; Rimondi, F; Ristori, L; Robertson, W J; Robson, A; Rodrigo, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Rott, C; Ruiz, A; Russ, J; Rusu, V; Saarikko, H; Sabik, S; Safonov, A; Sakumoto, W K; Salamanna, G; Salto, O; Saltzberg, D; Sánchez, C; Santi, L; Sarkar, S; Sartori, L; Sato, K; Savard, P; Savoy-Navarro, A; Scheidle, T; Schlabach, P; Schmidt, E E; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scott, A L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Sexton-Kennedy, L; Sfiligoi, I; Shapiro, M D; Shears, T G; Shepard, P F; Sherman, D; Shimojima, M; Shochet, M; Shon, Y; Shreyber, I; Sidoti, A; Sinervo, P; Sisakian, A; Sjölin, J; Skiba, A; Slaughter, A J; Sliwa, K; Smith, J R; Snider, F D; Snihur, R; Söderberg, M; Soha, A; Somalwar, S; Sorin, V; Spalding, J; Spezziga, M; Spinella, F; Spreitzer, T; Squillacioti, P; Stanitzki, M; Staveris-Polykalas, A; Saint-Denis, R; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Stuart, D; Suh, J S; Sukhanov, A; Sumorok, K; Sun, H; Suzuki, T; Taffard, A; Takashima, R; Takeuchi, Y; Takikawa, K; Tanaka, M; Tanaka, R; Tanimoto, N; Tecchio, M; Teng, P K; Terashi, K; Tether, S; Thom, J; Thompson, A S; Thomson, E; Tipton, P; Tiwari, V; Tkaczyk, S; Toback, D; Tokar, S; Tollefson, K; Tomura, T; Tonelli, D; Tonnesmann, M; Torre, S; Torretta, D; Tourneur, S; Trischuk, W; Tsuchiya, R; Tsuno, S; Turini, N; Ukegawa, F; Unverhau, T; Uozumi, S; Usynin, D; Vaiciulis, A W; Vallecorsa, S; Varganov, A; Vataga, E; Velev, G; Veramendi, G; Veszpremi, V; Vidal, R; Vila, I; Vilar, R; Vine, T; Vollrath, I; Volobuev, I P; Volpi, G; Würthwein, F; Wagner, P; Wagner, R G; Wagner, R L; Wagner, W; Wallny, R; Walter, T; Wan, Z; Wang, S M; Warburton, A; Waschke, S; Waters, D; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Williams, G; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Wright, T; Wu, X; Wynne, S M; Yagil, A; Yamamoto, K; Yamaoka, J; Yamashita, T; Yang, C; Yang, U K; Yang, Y C; Yao, W M; Yeh, G P; Yoh, J; Yorita, K; Yoshida, T; Yu, G B; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zaw, I; Zetti, F; Zhang, X; Zhou, J; Zucchelli, S

    2006-01-01

    We describe a general search for resonances decaying to a neutral e-mu final state in ppbar collisions at a center-of-mass energy of 1.96 TeV. Using a data sample representing 344 pb^-1 of integrated luminosity recorded by the CDF-II experiment, we compare Standard Model predictions with the number of observed events for invariant masses between 50 and 800 GeV/c^2. Finding no significant excess (5 events observed vs. 7.7 +/- 0.8 expected for e-mu invariant masses > 100 GeV/c^2), we set limits on sneutrino and Z' masses as functions of lepton family number violating couplings.

  17. Search for the lepton flavor violating decay $Z \\rightarrow e\\mu$ in $pp$ collisions at $\\sqrt{s}$ = 8 TeV with the ATLAS detector

    CERN Document Server

    Aad, Georges; Abdallah, Jalal; Abdel Khalek, Samah; Abdinov, Ovsat; Aben, Rosemarie; Abi, Babak; Abolins, Maris; AbouZeid, Ossama; Abramowicz, Halina; Abreu, Henso; Abreu, Ricardo; Abulaiti, Yiming; Acharya, Bobby Samir; Adamczyk, Leszek; Adams, David; Adelman, Jahred; Adomeit, Stefanie; Adye, Tim; Agatonovic-Jovin, Tatjana; Aguilar-Saavedra, Juan Antonio; Agustoni, Marco; Ahlen, Steven; Ahmadov, Faig; Aielli, Giulio; Akerstedt, Henrik; Åkesson, Torsten Paul Ake; Akimoto, Ginga; Akimov, Andrei; Alberghi, Gian Luigi; Albert, Justin; Albrand, Solveig; Alconada Verzini, Maria Josefina; Aleksa, Martin; Aleksandrov, Igor; Alexa, Calin; Alexander, Gideon; Alexandre, Gauthier; Alexopoulos, Theodoros; Alhroob, Muhammad; Alimonti, Gianluca; Alio, Lion; Alison, John; Allbrooke, Benedict; Allison, Lee John; Allport, Phillip; Aloisio, Alberto; Alonso, Alejandro; Alonso, Francisco; Alpigiani, Cristiano; Altheimer, Andrew David; Alvarez Gonzalez, Barbara; Alviggi, Mariagrazia; Amako, Katsuya; Amaral Coutinho, Yara; Amelung, Christoph; Amidei, Dante; Amor Dos Santos, Susana Patricia; Amorim, Antonio; Amoroso, Simone; Amram, Nir; Amundsen, Glenn; Anastopoulos, Christos; Ancu, Lucian Stefan; Andari, Nansi; Andeen, Timothy; Anders, Christoph Falk; Anders, Gabriel; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Anduaga, Xabier; Angelidakis, Stylianos; Angelozzi, Ivan; Anger, Philipp; Angerami, Aaron; Anghinolfi, Francis; Anisenkov, Alexey; Anjos, Nuno; Annovi, Alberto; Antonaki, Ariadni; Antonelli, Mario; Antonov, Alexey; Antos, Jaroslav; Anulli, Fabio; Aoki, Masato; Aperio Bella, Ludovica; Apolle, Rudi; Arabidze, Giorgi; Aracena, Ignacio; Arai, Yasuo; Araque, Juan Pedro; Arce, Ayana; Arguin, Jean-Francois; Argyropoulos, Spyridon; Arik, Metin; Armbruster, Aaron James; Arnaez, Olivier; Arnal, Vanessa; Arnold, Hannah; Arratia, Miguel; Arslan, Ozan; Artamonov, Andrei; Artoni, Giacomo; Asai, Shoji; Asbah, Nedaa; Ashkenazi, Adi; Åsman, Barbro; Asquith, Lily; Assamagan, Ketevi; Astalos, Robert; Atkinson, Markus; Atlay, Naim Bora; Auerbach, Benjamin; Augsten, Kamil; Aurousseau, Mathieu; Avolio, Giuseppe; Azuelos, Georges; Azuma, Yuya; Baak, Max; Baas, Alessandra; Bacci, Cesare; Bachacou, Henri; Bachas, Konstantinos; Backes, Moritz; Backhaus, Malte; Backus Mayes, John; Badescu, Elisabeta; Bagiacchi, Paolo; Bagnaia, Paolo; Bai, Yu; Bain, Travis; Baines, John; Baker, Oliver Keith; Balek, Petr; Balli, Fabrice; Banas, Elzbieta; Banerjee, Swagato; Bannoura, Arwa A E; Bansal, Vikas; Bansil, Hardeep Singh; Barak, Liron; Baranov, Sergei; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Barillari, Teresa; Barisonzi, Marcello; Barklow, Timothy; Barlow, Nick; Barnett, Bruce; Barnett, Michael; Barnovska, Zuzana; Baroncelli, Antonio; Barone, Gaetano; Barr, Alan; Barreiro, Fernando; Barreiro Guimarães da Costa, João; Bartoldus, Rainer; Barton, Adam Edward; Bartos, Pavol; Bartsch, Valeria; Bassalat, Ahmed; Basye, Austin; Bates, Richard; Batley, Richard; Battaglia, Marco; Battistin, Michele; Bauer, Florian; Bawa, Harinder Singh; Beattie, Michael David; Beau, Tristan; Beauchemin, Pierre-Hugues; Beccherle, Roberto; Bechtle, Philip; Beck, Hans Peter; Becker, Anne Kathrin; Becker, Sebastian; Beckingham, Matthew; Becot, Cyril; Beddall, Andrew; Beddall, Ayda; Bedikian, Sourpouhi; Bednyakov, Vadim; Bee, Christopher; Beemster, Lars; Beermann, Thomas; Begel, Michael; Behr, Katharina; Belanger-Champagne, Camille; Bell, Paul; Bell, William; Bella, Gideon; Bellagamba, Lorenzo; Bellerive, Alain; Bellomo, Massimiliano; Belotskiy, Konstantin; Beltramello, Olga; Benary, Odette; Benchekroun, Driss; Bendtz, Katarina; Benekos, Nektarios; Benhammou, Yan; Benhar Noccioli, Eleonora; Benitez Garcia, Jorge-Armando; Benjamin, Douglas; Bensinger, James; Benslama, Kamal; Bentvelsen, Stan; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Berghaus, Frank; Beringer, Jürg; Bernard, Clare; Bernat, Pauline; Bernius, Catrin; Bernlochner, Florian Urs; Berry, Tracey; Berta, Peter; Bertella, Claudia; Bertoli, Gabriele; Bertolucci, Federico; Bertsche, Carolyn; Bertsche, David; Besana, Maria Ilaria; Besjes, Geert-Jan; Bessidskaia, Olga; Bessner, Martin Florian; Besson, Nathalie; Betancourt, Christopher; Bethke, Siegfried; Bhimji, Wahid; Bianchi, Riccardo-Maria; Bianchini, Louis; Bianco, Michele; Biebel, Otmar; Bieniek, Stephen Paul; Bierwagen, Katharina; Biesiada, Jed; Biglietti, Michela; Bilbao De Mendizabal, Javier; Bilokon, Halina; Bindi, Marcello; Binet, Sebastien; Bingul, Ahmet; Bini, Cesare; Black, Curtis; Black, James; Black, Kevin

    2014-01-01

    The ATLAS detector at the Large Hadron Collider is used to search for the lepton flavor violating process $Z \\rightarrow e\\mu$ in $pp$ collisions using $20.3~\\textrm{fb}^{-1}$ of data collected at $\\sqrt{s}= 8~\\textrm{TeV}$. An enhancement in the $e\\mu$ invariant mass spectrum is searched for at the $Z$ boson mass. The number of $Z$ bosons produced in the data sample is estimated using events of similar topology, $Z \\rightarrow ee$ and $\\mu\\mu$, significantly reducing the systematic uncertainty in the measurement. There is no evidence of an enhancement at the $Z$ boson mass, resulting in an upper limit on the branching fraction, ${\\cal B}(Z~\\rightarrow~e\\mu)~<~7.5 \\times 10^{-7}$ at the 95% confidence level.

  18. Prevention of ventilator-associated pneumonia in the intensive care unit: A review of the clinically relevant recent advancements

    Directory of Open Access Journals (Sweden)

    Holly Keyt

    2014-01-01

    Full Text Available Ventilator-associated pneumonia (VAP is one of the most commonly encountered hospital-acquired infections in intensive care units and is associated with significant morbidity and high costs of care. The pathophysiology, epidemiology, treatment and prevention of VAP have been extensively studied for decades, but a clear prevention strategy has not yet emerged. In this article we will review recent literature pertaining to evidence-based VAP-prevention strategies that have resulted in clinically relevant outcomes. A multidisciplinary strategy for prevention of VAP is recommended. Those interventions that have been shown to have a clinical impact include the following: (i Non-invasive positive pressure ventilation for able patients, especially in immunocompromised patients, with acute exacerbation of chronic obstructive pulmonary disease or pulmonary oedema, (ii Sedation and weaning protocols for those patients who do require mechanical ventilation, (iii Mechanical ventilation protocols including head of bed elevation above 30 degrees and oral care, and (iv Removal of subglottic secretions. Other interventions, such as selective digestive tract decontamination, selective oropharyngeal decontamination and antimicrobial-coated endotracheal tubes, have been tested in different studies. However, the evidence for the efficacy of these measures to reduce VAP rates is not strong enough to recommend their use in clinical practice. In numerous studies, the implementation of VAP prevention bundles to clinical practice was associated with a significant reduction in VAP rates. Future research that considers clinical outcomes as primary endpoints will hopefully result in more detailed prevention strategies.

  19. Development of the Self-Powered Extravehicular Mobility Unit Extravehicular Activity Data Recorder

    Science.gov (United States)

    Bernard, Craig; Hill, Terry R.; Murray, Sean; Wichowski, Robert; Rosenbush, David

    2012-01-01

    The Self-Powered Extravehicular Mobility Unit (EMU) Extravehicular Activity (EVA) Data Recorder (SPEEDR) is a field-programmable gate array (FPGA)-based device designed to collect high-rate EMU Primary Life Support Subsystem (PLSS) data for download at a later time. During EVA, the existing EMU PLSS data downlink capability is one data packet every 2 minutes and is subject to bad packets or loss of signal. Higher-rate PLSS data is generated by the Enhanced Caution and Warning System but is not normally captured or distributed. Access to higher-rate data will increase the capability of EMU anomaly resolution team to pinpoint issues remotely, saving crew time by reducing required call-down Q&A and on-orbit diagnostic activities. With no Space Shuttle flights post Fiscal Year 2011 (FY11), and potentially limited down-mass capability, the ISS crew and ground support personnel will have to be capable of on-orbit operations to maintain, diagnose, repair, and return to service EMU hardware, possibly through 2028. Collecting high-rate EMU PLSS data during both intravehicular activity (IVA) and EVA operations will provide trending analysis for life extension and/or predictive performance. The SPEEDR concept has generated interest as a tool/technology that could be used for other International Space Station subsystems or future exploration-class space suits where hardware reliability/availability is critical and low/variable bandwidth may require store then forward methodology. Preliminary work in FY11 produced a functional prototype consisting of an FPGA evaluation board, custom memory/interface circuit board, and custom software. The SPEEDR concept includes a stand-alone battery that is recharged by a computer Universal Serial Bus (USB) port while data are being downloaded.

  20. 基于 SolidWorks 动车组三维建模及静强度分析%Three-dimensional Modeling and Static Strength Analysis for EMU Based on SolidWorks

    Institute of Scientific and Technical Information of China (English)

    高晓玲; 李刚; 史明; 王新梅

    2015-01-01

    In order to calculate the life of motor train body, a method which is utilizing the body static strength analysis and fi-nite element nominal stress method to analyze the body strength of high speed motor train unit is put forward based on analyzing domestic and international standards in body.And fatigue strength evaluation of the CRH2 motor train unit body is carried out with the help of the finite element static strength analysis, which results show that the body strength satisfy the requirements under the trains meeting; Finally, fatigue life prediction of the train body is obtained by using the finite element nominal stress method, and the results meet the requirements of the fatigue life for EMU, thus provides theory basis for safe operation and maintenance of motor train unit.%为了计算动车组车体疲劳寿命,在分析国内外车体相关标准的基础上,提出了利用车体静强度分析和有限元分析法的高速动车组车体强度的分析方法,利用有限元分析法对 CRH2型动车组车体进行疲劳强度分析,结果表明会车时车体强度满足要求,最后,利用有限元名义应力方法得出车体的疲劳强度分析图,其结果满足疲劳寿命要求,为动车组的安全运行及维护提供了理论依据。

  1. Performance of a Water Recirculation Loop Maintenance Device and Process for the Advanced Spacesuit Water Membrane Evaporator

    Science.gov (United States)

    Steele, John W.; Rector, Tony; Bue, Grant C.; Campbell, Colin; Makinen, Janice

    2013-01-01

    A dual-bed device to maintain the water quality of the Advanced Spacesuit Water Membrane Evaporation (SWME) water recirculation loop has been designed and is undergoing testing. The SWME is a heat rejection device under development at the NASA Johnson Space Center to perform thermal control for advanced spacesuits. One advantage to this technology is the potential for a significantly greater degree of tolerance to contamination when compared to the existing Sublimator technology. The driver for the development of a water recirculation maintenance device is to further enhance this advantage through the leveraging of fluid loop management lessons-learned from the International Space Station (ISS). A bed design that was developed for a Hamilton Sundstrand military application, and considered for a potential ISS application with the Urine Processor Assembly, provides a low pressure drop means for water maintenance in a recirculation loop. The bed design is coupled with high capacity ion exchange resins, organic adsorbents, and a cyclic methodology developed for the Extravehicular Mobility Unit (EMU) Transport Water loop. The bed design further leverages a sorbent developed for ISS that introduces a biocide in a microgravity-compatible manner for the Internal Active Thermal Control System (IATCS). The leveraging of these water maintenance technologies to the SWME recirculation loop is a unique demonstration of applying the valuable lessons learned on the ISS to the next generation of manned spaceflight Environmental Control and Life Support System (ECLSS) hardware.

  2. Performance of a Water Recirculation Loop Maintenance Device and Process for the Advanced Spacesuit Water Membrane Evaporator

    Science.gov (United States)

    Rector, Tony; Steele, John W.; Bue, Grant C.; Campbell, Colin; Makinen, Janice

    2012-01-01

    A water loop maintenance device and process to maintain the water quality of the Advanced Spacesuit Water Membrane Evaporation (SWME) water recirculation loop has been undergoing a performance evaluation. The SWME is a heat rejection device under development at the NASA Johnson Space Center to perform thermal control for advanced spacesuits. One advantage to this technology is the potential for a significantly greater degree of tolerance to contamination when compared to the existing Sublimator technology. The driver for the water recirculation maintenance device and process is to further enhance this advantage through the leveraging of fluid loop management lessons-learned from the International Space Station (ISS). A bed design that was developed for a Hamilton Sundstrand military application, and considered for a potential ISS application with the Urine Processor Assembly, provides a low pressure drop means for water maintenance in a recirculation loop. The bed design is coupled with high capacity ion exchange resins, organic adsorbents, and a cyclic methodology developed for the Extravehicular Mobility Unit (EMU) Transport Water loop. The maintenance process further leverages a sorbent developed for ISS that introduces a biocide in a microgravity-compatible manner for the Internal Active Thermal Control System (IATCS). The leveraging of these water maintenance technologies to the SWME recirculation loop is a unique demonstration of applying the valuable lessons learned on the ISS to the next generation of manned spaceflight Environmental Control and Life Support System (ECLSS) hardware. This

  3. Design and Evaluation of a Water Recirculation Loop Maintenance Device for the Advanced Spacesuit Water Membrane Evaporator

    Science.gov (United States)

    Steele, John W.; Rector, Tony; Bue, Grant C.; Campbell, Colin; Makinen, Janice

    2011-01-01

    A dual-bed device to maintain the water quality of the Advanced Spacesuit Water Membrane Evaporation (SWME) water recirculation loop has been designed and is undergoing testing. The SWME is a heat rejection device under development at the NASA Johnson Space Center to perform thermal control for advanced spacesuits. One advantage to this technology is the potential for a significantly greater degree of tolerance to contamination when compared to the existing Sublimator technology. The driver for the development of a water recirculation maintenance device is to further enhance this advantage through the leveraging of fluid loop management lessons-learned from the International Space Station (ISS). A bed design that was developed for a Hamilton Sundstrand military application, and considered for a potential ISS application with the Urine Processor Assembly, provides a low pressure drop means for water maintenance in a recirculation loop. The bed design is coupled with high capacity ion exchange resins, organic adsorbents, and a cyclic methodology developed for the Extravehicular Mobility Unit (EMU) Transport Water loop. The bed design further leverages a sorbent developed for ISS that introduces a biocide in a microgravity-compatible manner for the Internal Active Thermal Control System (IATCS). The leveraging of these water maintenance technologies to the SWME recirculation loop is a clear demonstration of applying the valuable lessons learned on the ISS to the next generation of manned spaceflight Environmental Control and Life Support System (ECLSS) hardware.

  4. Integrated Advanced Microwave Sounding Unit-A (AMSU-A). Performance Verification Report: AMSU-A1 Antenna Drive Subsystem, PN 1331720-2, S/N 106

    Science.gov (United States)

    Luu, D.

    1999-01-01

    This is the Performance Verification Report, AMSU-A1 Antenna Drive Subsystem, P/N 1331720-2, S/N 106, for the Integrated Advanced Microwave Sounding Unit-A (AMSU-A). The antenna drive subsystem of the METSAT AMSU-A1, S/N 106, P/N 1331720-2, completed acceptance testing per A-ES Test Procedure AE-26002/lD. The test included: Scan Motion and Jitter, Pulse Load Bus Peak Current and Rise Time, Resolver Reading and Position Error, Gain/ Phase Margin, and Operational Gain Margin. The drive motors and electronic circuitry were also tested at the component level. The drive motor test includes: Starting Torque Test, Motor Commutation Test, Resolver Operation/ No-Load Speed Test, and Random Vibration. The electronic circuitry was tested at the Circuit Card Assembly (CCA) level of production; each test exercised all circuit functions. The transistor assembly was tested during the W3 cable assembly (1356941-1) test.

  5. China,ASEAN Advance United

    Institute of Scientific and Technical Information of China (English)

    Zhao Jinfu; Ma Zongshi

    2010-01-01

    This article aims to reexamine relations between China and the Association of Southeast Asian Nations(ASEAN)after recent moves by the U.S.to intervene in the relationship.First,it looks at how the global financial crisis has affected relations; it then analyzes the effect of U.S.interference; and,finally it wraps up with a prediction of the fate of the ASEAN way and its impact on the Asia-Pacific region.

  6. Advanced Biofuels Processing Development Unit

    Data.gov (United States)

    Federal Laboratory Consortium — The ABPDU at LBNL has a unique mission to partner with industry, National Labs, Bioenergy Research Centers, and academia to optimize, integrate and scale production...

  7. Efforts to Reduce International Space Station Crew Maintenance for the Management of the Extravehicular Mobility Unit Transport Loop Water Quality

    Science.gov (United States)

    Steele, John W.; Etter, David; Rector, Tony; Boyle, Robert; Vandezande, Christopher

    2013-01-01

    The EMU (Extravehicular Mobility Unit) contains a semi-closed-loop re-circulating water circuit (Transport Loop) to absorb heat into a LCVG (Liquid Coolant and Ventilation Garment) worn by the astronaut. A second, single-pass water circuit (Feed-water Loop) provides water to a cooling device (Sublimator) containing porous plates, and that water sublimates through the porous plates to space vacuum. The cooling effect from the sublimation of this water translates to a cooling of the LCVG water that circulates through the Sublimator. The quality of the EMU Transport Loop water is maintained through the use of a water processing kit (ALCLR Airlock Cooling Loop Remediation) that is used to periodically clean and disinfect the water circuit. Opportunities to reduce crew time associated with on-orbit ALCLR operations include a detailed review of the historical water quality data for evidence to support an extension to the implementation cycle. Furthermore, an EMU returned after 2-years of use on the ISS (International Space Station) is being used as a test bed to evaluate the results of extended and repeated ALCLR implementation cycles. Finally, design, use and on-orbit location enhancements to the ALCLR kit components are being considered to allow the implementation cycle to occur in parallel with other EMU maintenance and check-out activities, and to extend the life of the ALCLR kit components. These efforts are undertaken to reduce the crew-time and logistics burdens for the EMU, while ensuring the long-term health of the EMU water circuits for a post-Shuttle 6-year service life.

  8. Redesign of the Extravehicular Mobility Unit Airlock Cooling Loop Recovery Assembly

    Science.gov (United States)

    Steele, John; Elms, Theresa; Peyton, Barbara; Rector, Tony; Jennings, Mallory

    2016-01-01

    During EVA (Extravehicular Activity) 23 aboard the ISS (International Space Station) on 07/16/2013 an episode of water in the EMU (Extravehicular Mobility Unit) helmet occurred, necessitating a termination of the EVA (Extravehicular Activity) shortly after it began. The root cause of the failure was determined to be ground-processing short-comings of the ALCLR (Airlock Cooling Loop Recovery) Ion Beds which led to various levels of contaminants being introduced into the Ion Beds before they left the ground. The Ion Beds were thereafter used to scrub the failed EMU cooling water loop on-orbit during routine scrubbing operations. The root cause investigation identified several areas for improvement of the ALCLR Assembly which have since been initiated. Enhanced washing techniques for the ALCLR Ion Bed have been developed and implemented. On-orbit cooling water conductivity and pH analysis capability to allow the astronauts to monitor proper operation of the ALCLR Ion Bed during scrubbing operation is being investigated. A simplified means to acquire on-orbit EMU cooling water samples has been designed. Finally, an inherently cleaner organic adsorbent to replace the current lignite-based activated carbon, and a non-separable replacement for the separable mixed ion exchange resin are undergoing evaluation. These efforts are undertaken to enhance the performance and reduce the risk associated with operations to ensure the long-term health of the EMU cooling water circuit.

  9. New Lithium-ion Polymer Battery for the Extravehicular Mobility Unit Suit

    Science.gov (United States)

    Jeevarajan, J. A.; Darcy, E. C.

    2004-01-01

    The Extravehicular Mobility Unit (EMU) suit currently has a silver-zinc battery that is 20.5 V and 45 Ah capacity. The EMU's portable life support system (PLSS) will draw power from the battery during the entire period of an EVA. Due to the disadvantages of using the silver-zinc battery in terms of cost and performance, a new high energy density battery is being developed for future use, The new battery (Lithium-ion battery or LIB) will consist of Li-ion polymer cells that will provide power to the EMU suit. The battery design consists of five 8 Ah cells in parallel to form a single module of 40 Ah and five such modules will be placed in series to give a 20.5 V, 40 Ah battery. Charging will be accomplished on the Shuttle or Station using the new LIB charger or the existing ALPS (Air Lock Power Supply) charger. The LIB delivers a maximum of 3.8 A on the average, for seven continuous hours, at voltages ranging from 20.5 V to 16.0 V and it should be capable of supporting transient pulses during start up and once every hour to support PLSS fan and pump operation. Figure 1 shows the placement of the battery in the backpack area of the EMU suit. The battery and cells will undergo testing under different conditions to understand its performance and safety characteristics.

  10. Investment in epilepsy monitoring units improves epilepsy care—experience in a regional neuroscience centre

    LENUS (Irish Health Repository)

    McGinty, RN

    2017-08-01

    An evaluation of the clinical yield of inpatient long-term video-EEG (vEEG) in a new epilepsy monitoring unit (EMU) was undertaken, with findings compared to the centre’s prior method of bedside vEEG recording in a standard neurology ward, as reported in 2004. A retrospective analysis of neurophysiology reports for all adults who underwent elective vEEG monitoring in the EMU at Cork University Hospital between January 2015 and July 2016 was conducted. Of 115 vEEG studies in the EMU, 100 (87.0%) were deemed diagnostically conclusive, 14 (12.2%) failed to catch any clinical events and showed normal EEG throughout, and one (0.9%) captured spells of unclear clinical significance—the corresponding figures reported in 2004 for bedside vEEGs were 21.3%, 77% and 1.6%, respectively. The EMU offers a more effective method of recording inpatient vEEG, which aids decision-making and improves clinical outcomes. Some evidence-based measures which could further enhance diagnostic yield are discussed.

  11. Search for sneutrino particles in e+mu final states in ppbar collisions at sqrt(s)=1.96 TeV

    Energy Technology Data Exchange (ETDEWEB)

    Abazov, V.M.; /Fermilab

    2007-11-01

    We report a search for R-parity violating production and decay of sneutrino particles in the e{mu} final state with 1.04 {+-} 0.06 fb{sup -1} of data collected with the D0 detector at the Fermilab Tevatron Collider in 2002-2006. Good agreement between the data and the standard model prediction is observed. With no evidence for new physics, we set limits on the R-parity violating couplings {lambda}{prime}{sub 311} and {lambda}{sub 312} as a function of sneutrino mass.

  12. Search for decays of B0 mesons into pairs of charged leptons: B0->e+e-, B0->mu+mu-, B0->e+-mu-+

    CERN Document Server

    Aubert, B; Boutigny, D; Couderc, F; Gaillard, J M; Hicheur, A; Karyotakis, Yu; Lees, J P; Tisserand, V; Zghiche, A; Palano, A; Pompili, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Borgland, A W; Breon, A B; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Day, C T; Gill, M S; Gritsan, A V; Groysman, Y; Jacobsen, R G; Kadel, R W; Kadyk, J; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, Michael T; Shelkov, V G; Wenzel, W A; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Fritsch, M; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Steinke, M; Boyd, J T; Chevalier, N; Cottingham, W N; Kelly, M P; Latham, T E; Wilson, F F; Çuhadar-Dönszelmann, T; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Thiessen, D; Khan, A; Kyberd, P; Teodorescu, L; Blinov, A E; Blinov, V E; Druzhinin, V P; Golubev, V B; Ivanchenko, V N; Kravchenko, E A; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Yushkov, A N; Best, D; Bruinsma, M; Chao, M; Eschrich, I; Kirkby, D; Lankford, A J; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Buchanan, C; Hartfiel, B L; Foulkes, S D; Gary, J W; Shen, B C; Wang, K; Del Re, D; Hadavand, H K; Hill, E J; MacFarlane, D B; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Dahmes, B; Levy, S L; Long, O; Lu, A; Mazur, M A; Richman, J D; Verkerke, W; Beck, T W; Eisner, A M; Heusch, C A; Lockman, W S; Nesom, G; Schalk, T; Schmitz, R E; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dubois-Felsmann, G P; Dvoretskii, A; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Yang, S; Jayatilleke, S M; Mancinelli, G; Meadows, B T; Sokoloff, M D; Abe, T; Blanc, F; Bloom, P; Chen, S; Ford, W T; Nauenberg, U; Olivas, A; Rankin, P; Smith, J G; Zhang, J; Zhang, L; Chen, A; Harton, J L; Soffer, A; Toki, W H; Wilson, R J; Zeng, Q L; Altenburg, D; Brandt, T; Brose, J; Dickopp, M; Feltresi, E; Hauke, A; Lacker, H M; Müller-Pfefferkorn, R; Nogowski, R; Otto, S; Petzold, A; Schubert, J; Schubert, Klaus R; Schwierz, R; Spaan, B; Sundermann, J E; Bernard, D; Bonneaud, G R; Brochard, F; Grenier, P; Schrenk, S; Thiebaux, C; Vasileiadis, G; Verderi, M; Bard, D J; Clark, P J; Lavin, D; Muheim, F; Playfer, S; Xie, Y; Andreotti, M; Azzolini, V; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Piemontese, L; Sarti, A; Treadwell, E; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Patteri, P; Piccolo, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Crosetti, G; Lo Vetere, M; Macri, M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Bailey, S; Brandenburg, G; Morii, M; Won, E; Dubitzky, R S; Langenegger, U; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Gaillard, J R; Morton, G W; Nash, J A; Nikolich, M B; Taylor, G P; Charles, M J; Grenier, G J; Mallik, U; Cochran, J; Crawley, H B; Lamsa, J; Meyer, W T; Prell, S; Rosenberg, E I; Yi, J; Davier, M; Grosdidier, G; Höcker, A; Laplace, S; Le Diberder, F R; Lepeltier, V; Lutz, A M; Petersen, T C; Plaszczynski, S; Schune, M H; Tantot, L; Wormser, G; Cheng, C H; Lange, D J; Simani, M C; Wright, D M; Bevan, A J; Chavez, C A; Coleman, J P; Forster, I J; Fry, J R; Gabathuler, Erwin; Gamet, R; Parry, R J; Payne, D J; Sloane, R J; Touramanis, C; Back, J J; Harrison, P F; Mohanty, G B; Cowan, G; Flack, R L; Flächer, H U; Green, M G; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Winter, M A; Brown, D; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Hodgkinson, M C; Lafferty, G D; Lyon, A J; Williams, J C; Farbin, A; Hulsbergen, W D; Jawahery, A; Kovalskyi, D; Lae, C K; Lillard, V; Roberts, D A; Blaylock, G; Dallapiccola, C; Flood, K T; Hertzbach, S S; Kofler, R; Koptchev, V B; Moore, T B; Saremi, S; Stängle, H; Willocq, S; Cowan, R; Sciolla, G; Taylor, F; Yamamoto, R K; Mangeol, D J J; Patel, P M; Robertson, S H; Lazzaro, A; Palombo, F; Bauer, J M; Cremaldi, L M; Eschenburg, V; Godang, R; Kroeger, R; Reidy, J; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Taras, P; Nicholson, H; Fabozzi, F; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Bulten, H; Raven, G; Snoek, H L; Wilden, L; Jessop, C P; LoSecco, J M; Gabriel, T A; Allmendinger, T; Brau, B; Gan, K K; Honscheid, K; Hufnagel, D; Kagan, H; Kass, R; Pulliam, T; Rahimi, A M; Ter-Antonian, R; Wong, Q K; Brau, J E; Frey, R; Igonkina, O; Potter, C T; Sinev, N B; Strom, D; Torrence, E; Colecchia, F; Dorigo, A; Galeazzi, F; Margoni, M; Morandin, M; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Tiozzo, G; Voci, C; Benayoun, M; Briand, H; Chauveau, J; David, P; La Vaissière, C de; Del Buono, L; Hamon, O; John, M J J; Leruste, P; Malcles, J; Ocariz, J; Pivk, M; Roos, L; T'Jampens, S; Therin, G; Manfredi, P F; Re, V; Behera, P K; Gladney, L; Guo, Q H; Panetta, J; Anulli, F; Biasini, M; Peruzzi, I M; Pioppi, M; Angelini, C; Batignani, G; Bettarini, S; Bondioli, M; Bucci, F; Calderini, G; Carpinelli, M; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Martínez-Vidal, F; Neri, N; Paoloni, E; Rama, M; Rizzo, G; Sandrelli, F; Walsh, J; Haire, M; Judd, D; Paick, K; Wagoner, D E; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Miftakov, V; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Pierini, M; Piredda, G; Safai-Tehrani, F; Voena, C; Christ, S; Wagner, G; Waldi, R; Adye, T; De Groot, N; Franek, B J; Geddes, N I; Gopal, G P; Olaiya, E O; Aleksan, Roy; Emery, S; Gaidot, A; Ganzhur, S F; Giraud, P F; Hamel de Monchenault, G; Kozanecki, Witold; Langer, M; Legendre, M; London, G W; Mayer, B; Schott, G; Vasseur, G; Yéche, C; Zito, M; Purohit, M V; Weidemann, A W; Wilson, J R; Yumiceva, F X; Aston, D; Bartoldus, R; Berger, N; Boyarski, A M; Buchmüller, O L; Claus, R; Convery, M R; Cristinziani, M; De Nardo, Gallieno; Dong, D; Dorfan, J; Dujmic, D; Dunwoodie, W M; Elsen, E E; Fan, S; Field, R C; Glanzman, T; Gowdy, S J; Hadig, T; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Kocian, M L; Leith, D W G S; Libby, J; Luitz, S; Lüth, V; Lynch, H L; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Petrak, S; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Simi, G; Snyder, A; Soha, A; Stelzer, J; Su, D; Sullivan, M K; Vavra, J; Wagner, S R; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Young, C C; Burchat, Patricia R; Edwards, A J; Meyer, T I; Petersen, B A; Roat, C; Ahmed, S; Alam, M S; Ernst, J A; Saeed, M A; Saleem, M; Wappler, F R; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Kim, H; Ritchie, J L; Satpathy, A; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Bóna, M; Gallo, F; Gamba, D; Borean, C; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Poropat, P; Vuagnin, G; Panvini, R S; Banerjee, Sw; Brown, C M; Fortin, D; Jackson, P D; Kowalewski, R V; Roney, J M; Sobie, R J; Band, H R; Dasu, S; Datta, M; Eichenbaum, A M; Graham, M; Hollar, J J; Johnson, J R; Kutter, P E; Li, H; Liu, R; Mihályi, A; Mohapatra, A K; Pan, Y; Prepost, R; Rubin, A E; Sekula, S J; Tan, P; Von Wimmersperg-Töller, J H; Wu, J; Wu, S L; Yu, Z; Greene, M G; Neal, H

    2004-01-01

    We present a search for the decays B0->e+e-, B0->mu+mu-, and B0->e+- mu-+ in data collected at the Y(4S) resonance with the Babar detector at the SLAC B Factory. Using a data set of 111 fb^-1, we find no evidence for a signal in any of the three channels investigated and set the following branching fraction upper limits at the 90% confidence level: B(B0->e+e-)mu+mu-) e+-mu-+) < 18 x 10^-8.

  13. A Heuristic Approach to the Disease Diagnose System Using Machine Learning Algorithms (An Expert Advisory System for EMU Bird’s Diseases

    Directory of Open Access Journals (Sweden)

    P.Naga Jyothi,

    2010-03-01

    Full Text Available The paper deals with the concepts of expert system and data mining belongs to the Artificial Intelligence fields. The main task of expert system is to ratiocination, while the machine learning algorithm is to find the better optimal solution. This paper mainly focuses on diagnoses of the disease which is effected to the Emu bird by mechanism of Particle Swarm Optimization (PSO algorithm and Artificial Bee Colony(ABC algorithm. The decisive rules of database is mined and that could be applied in expert system. Thus, by applying optimization techniques resulting to best global optimized solution.

  14. Search for scalar neutrino superpartners in e+mu final states in pp collisions at sqrt[s]=1.96 TeV.

    Science.gov (United States)

    Abazov, V M; Abbott, B; Abolins, M; Acharya, B S; Adams, M; Adams, T; Aguilo, E; Ahn, S H; Ahsan, M; Alexeev, G D; Alkhazov, G; Alton, A; Alverson, G; Alves, G A; Anastasoaie, M; Ancu, L S; Andeen, T; Anderson, S; Andrieu, B; Anzelc, M S; Arnoud, Y; Arov, M; Arthaud, M; Askew, A; Asman, B; Assis Jesus, A C S; Atramentov, O; Autermann, C; Avila, C; Ay, C; Badaud, F; Baden, A; Bagby, L; Baldin, B; Bandurin, D V; Banerjee, S; Banerjee, P; Barberis, E; Barfuss, A-F; Bargassa, P; Baringer, P; Barreto, J; Bartlett, J F; Bassler, U; Bauer, D; Beale, S; Bean, A; Begalli, M; Begel, M; Belanger-Champagne, C; Bellantoni, L; Bellavance, A; Benitez, J A; Beri, S B; Bernardi, G; Bernhard, R; Bertram, I; Besançon, M; Beuselinck, R; Bezzubov, V A; Bhat, P C; Bhatnagar, V; Biscarat, C; Blazey, G; Blekman, F; Blessing, S; Bloch, D; Bloom, K; Boehnlein, A; Boline, D; Bolton, T A; Borissov, G; Bose, T; Brandt, A; Brock, R; Brooijmans, G; Bross, A; Brown, D; Bu, X B; Buchanan, N J; Buchholz, D; Buehler, M; Buescher, V; Bunichev, V; Burdin, S; Burke, S; Burnett, T H; Buszello, C P; Butler, J M; Calfayan, P; Calvet, S; Cammin, J; Carvalho, W; Casey, B C K; Cason, N M; Castilla-Valdez, H; Chakrabarti, S; Chakraborty, D; Chan, K M; Chan, K; Chandra, A; Charles, F; Cheu, E; Chevallier, F; Cho, D K; Choi, S; Choudhary, B; Christofek, L; Christoudias, T; Cihangir, S; Claes, D; Coadou, Y; Cooke, M; Cooper, W E; Corcoran, M; Couderc, F; Cousinou, M-C; Crépé-Renaudin, S; Cutts, D; Cwiok, M; da Motta, H; Das, A; Davies, G; De, K; de Jong, S J; De La Cruz-Burelo, E; De Oliveira Martins, C; Degenhardt, J D; Déliot, F; Demarteau, M; Demina, R; Denisov, D; Denisov, S P; Desai, S; Diehl, H T; Diesburg, M; Dominguez, A; Dong, H; Dudko, L V; Duflot, L; Dugad, S R; Duggan, D; Duperrin, A; Dyer, J; Dyshkant, A; Eads, M; Edmunds, D; Ellison, J; Elvira, V D; Enari, Y; Eno, S; Ermolov, P; Evans, H; Evdokimov, A; Evdokimov, V N; Ferapontov, A V; Ferbel, T; Fiedler, F; Filthaut, F; Fisher, W; Fisk, H E; Ford, M; Fortner, M; Fox, H; Fu, S; Fuess, S; Gadfort, T; Galea, C F; Gallas, E; Galyaev, E; Garcia, C; Garcia-Bellido, A; Gavrilov, V; Gay, P; Geist, W; Gelé, D; Gerber, C E; Gershtein, Y; Gillberg, D; Ginther, G; Gollub, N; Gómez, B; Goussiou, A; Grannis, P D; Greenlee, H; Greenwood, Z D; Gregores, E M; Grenier, G; Gris, Ph; Grivaz, J-F; Grohsjean, A; Grünendahl, S; Grünewald, M W; Guo, J; Guo, F; Gutierrez, P; Gutierrez, G; Haas, A; Hadley, N J; Haefner, P; Hagopian, S; Haley, J; Hall, I; Hall, R E; Han, L; Hanagaki, K; Hansson, P; Harder, K; Harel, A; Harrington, R; Hauptman, J M; Hauser, R; Hays, J; Hebbeker, T; Hedin, D; Hegeman, J G; Heinmiller, J M; Heinson, A P; Heintz, U; Hensel, C; Herner, K; Hesketh, G; Hildreth, M D; Hirosky, R; Hobbs, J D; Hoeneisen, B; Hoeth, H; Hohlfeld, M; Hong, S J; Hossain, S; Houben, P; Hu, Y; Hubacek, Z; Hynek, V; Iashvili, I; Illingworth, R; Ito, A S; Jabeen, S; Jaffré, M; Jain, S; Jakobs, K; Jarvis, C; Jesik, R; Johns, K; Johnson, C; Johnson, M; Jonckheere, A; Jonsson, P; Juste, A; Käfer, D; Kajfasz, E; Kalinin, A M; Kalk, J R; Kalk, J M; Kappler, S; Karmanov, D; Kasper, P; Katsanos, I; Kau, D; Kaur, R; Kaushik, V; Kehoe, R; Kermiche, S; Khalatyan, N; Khanov, A; Kharchilava, A; Kharzheev, Y M; Khatidze, D; Kim, H; Kim, T J; Kirby, M H; Kirsch, M; Klima, B; Kohli, J M; Konrath, J-P; Kopal, M; Korablev, V M; Kozelov, A V; Krop, D; Kuhl, T; Kumar, A; Kunori, S; Kupco, A; Kurca, T; Kvita, J; Lacroix, F; Lam, D; Lammers, S; Landsberg, G; Lebrun, P; Lee, W M; Leflat, A; Lehner, F; Lellouch, J; Leveque, J; Lewis, P; Li, J; Li, Q Z; Li, L; Lietti, S M; Lima, J G R; Lincoln, D; Linnemann, J; Lipaev, V V; Lipton, R; Liu, Y; Liu, Z; Lobo, L; Lobodenko, A; Lokajicek, M; Love, P; Lubatti, H J; Lyon, A L; Maciel, A K A; Mackin, D; Madaras, R J; Mättig, P; Magass, C; Magerkurth, A; Mal, P K; Malbouisson, H B; Malik, S; Malyshev, V L; Mao, H S; Maravin, Y; Martin, B; McCarthy, R; Melnitchouk, A; Mendes, A; Mendoza, L; Mercadante, P G; Merkin, M; Merritt, K W; Meyer, J; Meyer, A; Millet, T; Mitrevski, J; Molina, J; Mommsen, R K; Mondal, N K; Moore, R W; Moulik, T; Muanza, G S; Mulders, M; Mulhearn, M; Mundal, O; Mundim, L; Nagy, E; Naimuddin, M; Narain, M; Naumann, N A; Neal, H A; Negret, J P; Neustroev, P; Nilsen, H; Nogima, H; Nomerotski, A; Novaes, S F; Nunnemann, T; O'Dell, V; O'Neil, D C; Obrant, G; Ochando, C; Onoprienko, D; Oshima, N; Osta, J; Otec, R; Otero Y Garzón, G J; Owen, M; Padley, P; Pangilinan, M; Parashar, N; Park, S-J; Park, S K; Parsons, J; Partridge, R; Parua, N; Patwa, A; Pawloski, G; Penning, B; Perfilov, M; Peters, K; Peters, Y; Pétroff, P; Petteni, M; Piegaia, R; Piper, J; Pleier, M-A; Podesta-Lerma, P L M; Podstavkov, V M; Pogorelov, Y; Pol, M-E; Polozov, P; Pope, B G; Popov, A V; Potter, C; Prado da Silva, W L; Prosper, H B; Protopopescu, S; Qian, J; Quadt, A; Quinn, B; Rakitine, A; Rangel, M S; Ranjan, K; Ratoff, P N; Renkel, P; Reucroft, S; Rich, P; Rijssenbeek, M; Ripp-Baudot, I; Rizatdinova, F; Robinson, S; Rodrigues, R F; Rominsky, M; Royon, C; Rubinov, P; Ruchti, R; Safronov, G; Sajot, G; Sánchez-Hernández, A; Sanders, M P; Santoro, A; Savage, G; Sawyer, L; Scanlon, T; Schaile, D; Schamberger, R D; Scheglov, Y; Schellman, H; Schieferdecker, P; Schliephake, T; Schwanenberger, C; Schwartzman, A; Schwienhorst, R; Sekaric, J; Severini, H; Shabalina, E; Shamim, M; Shary, V; Shchukin, A A; Shivpuri, R K; Siccardi, V; Simak, V; Sirotenko, V; Skubic, P; Slattery, P; Smirnov, D; Snow, J; Snow, G R; Snyder, S; Söldner-Rembold, S; Sonnenschein, L; Sopczak, A; Sosebee, M; Soustruznik, K; Souza, M; Spurlock, B; Stark, J; Steele, J; Stolin, V; Stoyanova, D A; Strandberg, J; Strandberg, S; Strang, M A; Strauss, M; Strauss, E; Ströhmer, R; Strom, D; Stutte, L; Sumowidagdo, S; Svoisky, P; Sznajder, A; Talby, M; Tamburello, P; Tanasijczuk, A; Taylor, W; Temple, J; Tiller, B; Tissandier, F; Titov, M; Tokmenin, V V; Toole, T; Torchiani, I; Trefzger, T; Tsybychev, D; Tuchming, B; Tully, C; Tuts, P M; Unalan, R; Uvarov, S; Uvarov, L; Uzunyan, S; Vachon, B; van den Berg, P J; Van Kooten, R; van Leeuwen, W M; Varelas, N; Varnes, E W; Vasilyev, I A; Vaupel, M; Verdier, P; Vertogradov, L S; Verzocchi, M; Villeneuve-Seguier, F; Vint, P; Vokac, P; Von Toerne, E; Voutilainen, M; Wagner, R; Wahl, H D; Wang, L; Wang, M H L S; Warchol, J; Watts, G; Wayne, M; Weber, M; Weber, G; Wenger, A; Wermes, N; Wetstein, M; White, A; Wicke, D; Wilson, G W; Wimpenny, S J; Wobisch, M; Wood, D R; Wyatt, T R; Xie, Y; Yacoob, S; Yamada, R; Yan, M; Yasuda, T; Yatsunenko, Y A; Yin, H; Yip, K; Yoo, H D; Youn, S W; Yu, J; Zatserklyaniy, A; Zeitnitz, C; Zhao, T; Zhou, B; Zhu, J; Zielinski, M; Zieminska, D; Zieminski, A; Zivkovic, L; Zutshi, V; Zverev, E G

    2008-06-20

    We report a search for R-parity-violating production and decay of sneutrino particles in the emu final state with 1.04+/-0.06 fb-1 of data collected with the D0 detector at the Fermilab Tevatron Collider in 2002-2006. Good agreement between the data and the standard model prediction is observed. With no evidence for new physics, we set limits on the R-parity-violating couplings lambda'311 and lambda312 as a function of the sneutrino mass.

  15. Mode of correction is related to treatment timing in Class II patients treated with the mandibular advancement locking unit (MALU) appliance.

    Science.gov (United States)

    Candir, Muhsin; Kerosuo, Heidi

    2017-05-01

    To investigate the proportion of skeletal/dentoalveolar components for correction of Class II malocclusion in relation to the pubertal growth peak (PGP) among patients treated with the mandibular advancement locking unit (MALU) appliance. We conducted a retrospective study of 27 orthodontic patients (age range: 12-18 years; mean age 14.9 years) with skeletal Class II Division 1 malocclusion who were treated with the MALU appliance until they reached Class I occlusion with overjet and overbite within normal range. Pretreatment (T1) and posttreatment (T2) lateral cephalograms were analyzed using standard cephalometrics and sagittal occlusion analysis to assess changes in the dentoalveolar and skeletal complex. The cervical vertebral maturation (CVM) method was used to determine participants' skeletal maturation in T1 cephalograms. Based on this maturation, participants were divided into two groups: the peak group (treatment initiation before or during PGP [peak group, n=15]) or the postpeak group (treatment initiation after the PGP [n = 12]). No significant differences between groups were found at T1 for most of the skeletal and dental parameters investigated. At T2, the mean ANB angle and proclination of the mandibular incisors were significantly smaller in the peak group than in the postpeak group. In the peak group, skeletal correction comprised 54% and dental correction 46% of the total change at T2, while in the postpeak group the corresponding figures were 24% and 76%, respectively. Treatment initiated before or during PGP seems to result in a more favorable SNA/SNB relationship and less tipping of the mandibular incisors than when treatment is initiated after PGP.

  16. Advanced Sensor Platform to Evaluate Manloads For Exploration Suit Architectures

    Science.gov (United States)

    McFarland, Shane; Pierce, Gregory

    2016-01-01

    Space suit manloads are defined as the outer bounds of force that the human occupant of a suit is able to exert onto the suit during motion. They are defined on a suit-component basis as a unit of maximum force that the suit component in question must withstand without failure. Existing legacy manloads requirements are specific to the suit architecture of the EMU and were developed in an iterative fashion; however, future exploration needs dictate a new suit architecture with bearings, load paths, and entry capability not previously used in any flight suit. No capability currently exists to easily evaluate manloads imparted by a suited occupant, which would be required to develop requirements for a flight-rated design. However, sensor technology has now progressed to the point where an easily-deployable, repeatable and flexible manloads measuring technique could be developed leveraging recent advances in sensor technology. INNOVATION: This development positively impacts schedule, cost and safety risk associated with new suit exploration architectures. For a final flight design, a comprehensive and accurate man loads requirements set must be communicated to the contractor; failing that, a suit design which does not meet necessary manloads limits is prone to failure during testing or worse, during an EVA, which could cause catastrophic failure of the pressure garment posing risk to the crew. This work facilitates a viable means of developing manloads requirements using a range of human sizes & strengths. OUTCOME / RESULTS: Performed sensor market research. Highlighted three viable options (primary, secondary, and flexible packaging option). Designed/fabricated custom bracket to evaluate primary option on a single suit axial. Manned suited manload testing completed and general approach verified.

  17. The Regulation Framework for the Banking Sector: The EMU, European Banks and Rating Agencies before and during the Recent Financial and Debt Crisis

    Directory of Open Access Journals (Sweden)

    Eleftherios Thalassinos

    2012-05-01

    Full Text Available A regulation framework for the banking sector should be characterised by transparency,responsibility and performance in several important areas. These areas are the global and Europeanframework for corporate financial reporting (CFR, risk management (RM, stockholder value creation(SVC, corporate governance (CG, corporate social responsibility (CSR and sustainable development (SD.The regulation framework for the banking sector must also consider the fiscal and monetary environment inwhich a banking institution operates. The global rating system and the rating agencies will also have animportant impact on any regulation framework for the banking sector. These two factors play a key role whena financial, credit or debt crisis occurs. In this article, a holistic regulation framework for the banking sector ispresented. The article is based on European banks that are part of the European Monetary Union (EMU.Initially, it focuses on the timelines and review the integration of the European Monetary Union, relevantlegislation and information on member countries’ banking sectors. This information creates the frameworkfor the proposed model. The article considers all of the above factors in creating a holistic regulationframework for the banking sector to present in the context of the recent financial, credit and debt crises thathave taken place in the EMU.

  18. 动车组管理信息系统便携式移动终端的设计与实现%Design and implementation of mobile terminal for EMU-MIS

    Institute of Scientific and Technical Information of China (English)

    王忠凯; 史天运; 张惟皎

    2012-01-01

    Based on the platform of Windows Mobile, this paper applied Web Services for system integration and 3-tier architecture to construct software, designed and developed the mobile terminal for EMU-MIS, implemented the data report and synchronization for the routine inspection and maintenance of EMU. This terminal was used in Xi'an EMU servicing depot and showed good effect.%基于Windows Mobile开发平台,本文采用Web Services的系统集成方式和3层结构的软件架构方案,设计、开发了动车组管理信息系统便携式移动终端,实现了动车组日常检修数据的填报和同步.该系统在西安动车运用所使用,取得了良好的效果.

  19. Search for sneutrino production in $e\\mu$ final states in 5.3 fb$^{-1}$ of $p\\bar{p}$ collisions at $\\sqrt(s) =1.96$ TeV

    Energy Technology Data Exchange (ETDEWEB)

    Abazov, Victor Mukhamedovich; /Dubna, JINR; Abbott, Braden Keim; /Oklahoma U.; Abolins, Maris A.; /Michigan State U.; Acharya, Bannanje Sripath; /Tata Inst.; Adams, Mark Raymond; /Illinois U., Chicago; Adams, Todd; /Florida State U.; Alexeev, Guennadi D.; /Dubna, JINR; Alkhazov, Georgiy D.; /St. Petersburg, INP; Alton, Andrew K.; /Michigan U. /Augustana Coll., Sioux Falls; Alverson, George O.; /Northeastern U.; Alves, Gilvan Augusto; /Rio de Janeiro, CBPF /Nijmegen U.

    2010-07-01

    We report the results of a search for R parity violating (RPV) interactions leading to the production of supersymmetric sneutrinos decaying into e{mu} final states using 5.3 fb{sup -1} of integrated luminosity collected by the D0 experiment at the Fermilab Tevatron Collider. Having observed no evidence for production of e{mu} resonances, we set direct bounds on the RPV couplings {lambda}{prime}{sub 311} and {lambda}{sub 312} as a function of sneutrino mass.

  20. Carbon Monoxide Accumulation in the Extravehicular Mobility Unit

    Science.gov (United States)

    Conkin, J.; Norcrosss, J. R.; Alexander, D. J.; Sanders, R. W.; Makowski, M. S.

    2016-01-01

    Introduction: Life support technology in large closed systems like submarines and space stations catalyzes carbon monoxide (CO) to carbon dioxide, which is easily removed. However, in a small system like the Extravehicular Mobility Unit (EMU), spacesuit, CO from exogenous (contaminated oxygen (O (sub 2) supply) and endogenous (human metabolism) sources will accumulate in the free suit volume. The free volume becomes a sink for CO that is rebreathed by the astronaut. The accumulation through time depends on many variables: the amount absorbed by the astronaut, the amount produced by the astronaut (between 0.28 and 0.34 ?moles per hour per kilogram)[1], the amount that enters the suit from contaminated O (sub 2), the amount removed through suit leak, the free volume of the suit, and the O (sub 2) partial pressure[2], just to list a few. Contamination of the EMU O (sub 2) supply with no greater than 1 part per million CO was the motivation for empirical measurements from CO pulse oximetry (SpCO) as well as mathematical modeling of the EMU as a rebreather for CO. Methods: We developed a first-order differential mixing equation as well as an iterative method to compute CO accumulation in the EMU. Pre-post measurements of SpCO (Rad-57, Masimo Corporation) from EMU ground training and on-orbit extravehicular activities (EVAs) were collected. Results: Initial modeling without consideration of the astronaut as a sink but only the source of CO showed that after 8 hours breathing 100 percent O (sub 2) with a 10 milliliter per minute (760 millimeters Hg at 21 degrees Centigrade standard) suit leak, an endogenous production rate of 0.23 moles per hour per kilogram for a 70 kilogram person with 42 liters (1.5 cubic feet) free suit volume resulted in a peak CO partial pressure (pCO) of 0.047 millimeters Hg at 4.3 pounds per square inch absolute (222 millimeters Hg). Preliminary results based on a 2008 model[3] with consideration of the astronaut as a sink and source of CO

  1. Efforts to Reduce International Space Station Crew Maintenance Time in the Management of the Extravehicular Mobility Unit Transport Loop Water Quality

    Science.gov (United States)

    Etter,David; Rector, Tony; Boyle, robert; Zande, Chris Vande

    2012-01-01

    The EMU (Extravehicular Mobility Unit) contains a semi-closed-loop re-circulating water circuit (Transport Loop) to absorb heat into a LCVG (Liquid Coolant and Ventilation Garment) worn by the astronaut. A second, single-pass water circuit (Feed-water Loop) provides water to a cooling device (Sublimator) containing porous plates, and that water sublimates through the porous plates to space vacuum. The cooling effect from the sublimation of this water translates to a cooling of the LCVG water that circulates through the Sublimator. The quality of the EMU Transport Loop water is maintained through the use of a water processing kit (ALCLR - Airlock Cooling Loop Remediation) that is used to periodically clean and disinfect the water circuit. Opportunities to reduce crew time associated with ALCLR operations include a detailed review of the historical water quality data for evidence to support an extension to the implementation cycle. Furthermore, an EMU returned after 2-years of use on the ISS (International Space Station) is being used as a test bed to evaluate the results of extended and repeated ALCLR implementation cycles. Finally, design, use and on-orbit location enhancements to the ALCLR kit components are being considered to allow the implementation cycle to occur in parallel with other EMU maintenance and check-out activities, and to extend the life of the ALCLR kit components. These efforts are undertaken to reduce the crew-time and logistics burdens for the EMU, while ensuring the long-term health of the EMU water circuits for a post- Shuttle 6-year service life.

  2. Compte rendu de l'ouvrage Business and the Euro. Business groups and the politics of EMU Germany and United Kingdom

    OpenAIRE

    Grossman, Emiliano

    2007-01-01

    L’ouvrage de M. Duckenfield s’insère dans un débat déjà ancien sur la relation entre groupes d’intérêt économiques et accords économiques internationaux. De longue date, ce travail est dominé par les approches dites d’économie politique internationale, qui s’inspirent pour l’essentiel d’une application du théorème Stolper-Samuelson aux relations internationales. Ce dernier, en résumé, postule que les détenteurs de facteurs de production relativement abondants favoriseront l’ouv...

  3. A Compilation of Boiling Water Reactor Operational Experience for the United Kingdom's Office for Nuclear Regulation's Advanced Boiling Water Reactor Generic Design Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wheeler, Timothy A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Liao, Huafei [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-12-01

    United States nuclear power plant Licensee Event Reports (LERs), submitted to the United States Nuclear Regulatory Commission (NRC) under law as required by 10 CFR 50.72 and 50.73 were evaluated for reliance to the United Kingdom’s Health and Safety Executive – Office for Nuclear Regulation’s (ONR) general design assessment of the Advanced Boiling Water Reactor (ABWR) design. An NRC compendium of LERs, compiled by Idaho National Laboratory over the time period January 1, 2000 through March 31, 2014, were sorted by BWR safety system and sorted into two categories: those events leading to a SCRAM, and those events which constituted a safety system failure. The LERs were then evaluated as to the relevance of the operational experience to the ABWR design.

  4. Hydrothermal Alteration Maps of the Central and Southern Basin and Range Province of the United States Compiled From Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Data

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data and Interactive Data Language (IDL) logical operator algorithms were used to map...

  5. 开行动车组情况下增建二线铺架施工技术研究%Research on Construction Technology for Additional 2 nd Track Laying and Beam Erecting in EMU Operating

    Institute of Scientific and Technical Information of China (English)

    赵代强

    2013-01-01

    遂渝二线铺架工程为国内首例在既有遂渝线开行动车组时速165 km条件下进行的增建二线工程,涉及多处与既有线并行、交叉,部分地段离既有线线间距小于6.5 m,最小线间距仅为4.4 m。为了确保增建二线工程施工安全和质量,对动车组通过风压检算、临近既有线4.4~6.5m小线间距范围内架梁、铺轨、单元焊接及应力放散锁定施工工艺等关键技术进行了研究,创新了施工工艺,制定了安全保障措施,成功解决了与既有线距离4.4~6.5m范围内铺架施工技术难题,最大限度保障了既有线运营和工程施工的安全质量,降低了工程成本,缩短了施工工期,取得了显著的社会和经济效益,对于既有铁路小线间距范围内增建二线施工技术具有重要的借鉴意义。%The additional 2 nd track laying and beam erecting of Chongqing-Suining railway is first ly done in China under the condition of the EMU operating on the existing Chongqing-Suining railway at a speed of 165 km/h.Several sections involve parallel and cross to the existing lines.The spacing of partial sections is less than 6.5m to the existing line,the minimum spacing is only 4.4 m.To ensure the construction safety and quality of the additional 2 nd track project,this pa-per has studied such key techniques as wind pressure checking when EMU passing,locking construction process such as beam erecting,track laying,unit welding and stress relief within the spacing range of 4.4~6.5 m to the existing line, and successfully solved the technical problems thereof through the innovative construction technology and safety meas-ures.This has achieved the remarkable social and economic benefits though the maximum protection of existing operation and the engineering construction safety and quality,reducing the engineering cost,shortening the construction period, which has an important reference to the construction technology for building

  6. Search for lepton flavour violation in the $e\\mu$ continuum with the ATLAS detector in $\\sqrt{s}$ = 7 TeV pp collisions at the LHC

    CERN Document Server

    Aad, Georges; Abdallah, Jalal; Abdelalim, Ahmed Ali; Abdesselam, Abdelouahab; Abdinov, Ovsat; Abi, Babak; Abolins, Maris; Abramowicz, Halina; Abreu, Henso; Acerbi, Emilio; Acharya, Bobby Samir; Adams, David; Addy, Tetteh; Adelman, Jahred; Adomeit, Stefanie; Adragna, Paolo; Adye, Tim; Aefsky, Scott; Aguilar-Saavedra, Juan Antonio; Aharrouche, Mohamed; Ahlen, Steven; Ahles, Florian; Ahmad, Ashfaq; Ahsan, Mahsana; Aielli, Giulio; Akdogan, Taylan; Åkesson, Torsten Paul Ake; Akimoto, Ginga; Akimov, Andrei; Akiyama, Kunihiro; Aktas, Adil; Alam, Mohammad; Alam, Muhammad Aftab; Albrand, Solveig; Aleksa, Martin; Aleksandrov, Igor; Aleppo, Mario; Alessandria, Franco; Alexa, Calin; Alexander, Gideon; Alexandre, Gauthier; Alexopoulos, Theodoros; Alhroob, Muhammad; Aliev, Malik; Alimonti, Gianluca; Alison, John; Aliyev, Magsud; Allport, Phillip; Allwood-Spiers, Sarah; Almond, John; Aloisio, Alberto; Alon, Raz; Alonso, Alejandro; Alviggi, Mariagrazia; Amako, Katsuya; Amelung, Christoph; Ammosov, Vladimir; Amorim, Antonio; Amorós, Gabriel; Amram, Nir; Anastopoulos, Christos; Andeen, Timothy; Anders, Christoph Falk; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Anduaga, Xabier; Angerami, Aaron; Anghinolfi, Francis; Anjos, Nuno; Annovi, Alberto; Antonaki, Ariadni; Antonelli, Mario; Antonelli, Stefano; Antonov, Alexey; Antos, Jaroslav; Anulli, Fabio; Aoun, Sahar; Aperio Bella, Ludovica; Apolle, Rudi; Arabidze, Giorgi; Aracena, Ignacio; Arai, Yasuo; Arce, Ayana; Archambault, John-Paul; Arfaoui, Samir; Arguin, Jean-Francois; Arik, Engin; Arik, Metin; Armbruster, Aaron James; Arnaez, Olivier; Arnault, Christian; Artamonov, Andrei; Artoni, Giacomo; Arutinov, David; Asai, Makoto; Asai, Shoji; Asfandiyarov, Ruslan; Ask, Stefan; Åsman, Barbro; Asner, David; Asquith, Lily; Assamagan, Ketevi; Astbury, Alan; Astvatsatourov, Anatoli; Atoian, Grigor; Aubert, Bernard; Auge, Etienne; Augsten, Kamil; Aurousseau, Mathieu; Austin, Nicholas; Avolio, Giuseppe; Avramidou, Rachel Maria; Axen, David; Azuelos, Georges; Azuma, Yuya; Baak, Max; Baccaglioni, Giuseppe; Bacci, Cesare; Bach, Andre; Bachacou, Henri; Bachas, Konstantinos; Bachy, Gerard; Backes, Moritz; Backhaus, Malte; Badescu, Elisabeta; Bagnaia, Paolo; Bahinipati, Seema; Bai, Yu; Bailey, David; Bain, Travis; Baines, John; Baker, Oliver Keith; Baker, Mark; Baker, Sarah; Baltasar Dos Santos Pedrosa, Fernando; Banas, Elzbieta; Banerjee, Piyali; Banerjee, Swagato; Banfi, Danilo; Bangert, Andrea Michelle; Bansal, Vikas; Bansil, Hardeep Singh; Barak, Liron; Baranov, Sergei; Barbaro Galtieri, Angela; Barber, Tom; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Bardin, Dmitri; Barillari, Teresa; Barisonzi, Marcello; Barklow, Timothy; Barlow, Nick; Barnett, Bruce; Barnett, Michael; Baroncelli, Antonio; Barr, Alan; Barreiro, Fernando; Barreiro Guimarães da Costa, João; Barrillon, Pierre; Bartoldus, Rainer; Barton, Adam Edward; Bartsch, Detlef; Bartsch, Valeria; Bates, Richard; Batkova, Lucia; Batley, Richard; Battaglia, Andreas; Battistin, Michele; Battistoni, Giuseppe; Bauer, Florian; Bawa, Harinder Singh; Beare, Brian; Beau, Tristan; Beauchemin, Pierre-Hugues; Beccherle, Roberto; Bechtle, Philip; Beck, Graham; Beck, Hans Peter; Beckingham, Matthew; Becks, Karl-Heinz; Beddall, Andrew; Beddall, Ayda; Bedikian, Sourpouhi; Bednyakov, Vadim; Bee, Christopher; Begel, Michael; Behar Harpaz, Silvia; Behera, Prafulla; Beimforde, Michael; Belanger-Champagne, Camille; Bell, Paul; Bell, William; Bella, Gideon; Bellagamba, Lorenzo; Bellina, Francesco; Bellomo, Giovanni; Bellomo, Massimiliano; Belloni, Alberto; Beloborodova, Olga; Belotskiy, Konstantin; Beltramello, Olga; Ben Ami, Sagi; Benary, Odette; Benchekroun, Driss; Benchouk, Chafik; Bendel, Markus; Benedict, Brian Hugues; Benekos, Nektarios; Benhammou, Yan; Benjamin, Douglas; Benoit, Mathieu; Bensinger, James; Benslama, Kamal; Bentvelsen, Stan; Beretta, Matteo; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Berghaus, Frank; Berglund, Elina; Beringer, Jürg; Bernardet, Karim; Bernat, Pauline; Bernhard, Ralf; Bernius, Catrin; Berry, Tracey; Bertin, Antonio; Bertolucci, Federico; Besana, Maria Ilaria; Besson, Nathalie; Bethke, Siegfried; Bhimji, Wahid; Bianchi, Riccardo-Maria; Bianco, Michele; Biebel, Otmar; Bieniek, Stephen Paul; Biesiada, Jed; Biglietti, Michela; Bilokon, Halina; Bindi, Marcello; Binet, Sebastien; Bingul, Ahmet; Bini, Cesare; Biscarat, Catherine; Bitenc, Urban; Black, Kevin; Blair, Robert; Blanchard, Jean-Baptiste; Blanchot, Georges; Blocker, Craig; Blocki, Jacek; Blondel, Alain; Blum, Walter

    2012-06-14

    This paper presents a search for the t-channel exchange of an R-parity violating scalar top quark ($\\tilde{t}$) in the $e^{\\pm}\\mu^{\\pm}$ continuum using 2.1/fb of data collected by the ATLAS detector in $\\sqrt{s}$ = 7 TeV pp collisions at the Large Hadron Collider. Data are found to be consistent with the expectation from the Standard Model backgrounds. Limits on R-parity-violating couplings at 95% C.L. are calculated as a function of the scalar top mass ($m_{\\tilde{t}}$). The upper limits on the production cross section for $pp \\to e\\mu X$, through the t-channel exchange of a scalar top quark, ranges from 170 fb for $m_{\\tilde{t}}$=95 GeV to 30 fb for $m_{\\tilde{t}}$=1000 GeV.

  7. EMU test operation reliability statistics and evaluation%动车组试运营可靠性数据统计与评估

    Institute of Scientific and Technical Information of China (English)

    李庭芳; 李敬雅; 夏丹锋; 周汛

    2013-01-01

      介绍了动车组试运营可靠性数据的来源、故障等级和可靠性指标的定义,通过开展可靠性统计和评估,发现产品的薄弱环节,再经过采取可靠性闭合管理,最终实现了可靠性的目标。%This paper introduces the EMU test operation reliability data source ,fault level and reliability index is defined ,by carrying out the reliability statistics and evaluation ,found product of the weak links ,and then by taking the reliability of closed management ,fi-nally achieve the reliability target .

  8. Two Curricular Units for Advanced Spanish Students: Guatemala, Ayer y Hoy Descubre Mexico. Fulbright-Hays Summer Seminars Abroad Program, 2000 (Mexico and Guatemala).

    Science.gov (United States)

    Hall, Bonnie L.

    These two curriculum units were developed as a result of study in Mexico and Guatemala during the Fulbright Hays Summer Seminar Abroad Program, 2000. The units are designed for use in an upper-level high school Spanish class. They are intended to be taught in Spanish, and the supplementary materials (with a few exceptions) are written in Spanish.…

  9. Performance of Water Recirculation Loop Maintentance Components for the Advanced Spacesuit Water Membrane Evaporator

    Science.gov (United States)

    Rector, Tony; Peyton, Barbara; Steele, John W.; Bue, Grant C.; Campbell, Colin; Makinen, Janice

    2014-01-01

    Water loop maintenance components to maintain the water quality of the Advanced Spacesuit Water Membrane Evaporation (SWME) water recirculation loop have undergone a comparative performance evaluation with a second SWME water recirculation loop with no water quality maintenance. Results show the benefits of periodic water maintenance. The SWME is a heat rejection device under development at the NASA Johnson Space Center to perform thermal control for advanced spacesuits. One advantage to this technology is the potential for a significantly greater degree of tolerance to contamination when compared to the existing Sublimator technology. The driver for the evaluation of water recirculation maintenance components was to further enhance this advantage through the leveraging of fluid loop management lessonslearned from the International Space Station (ISS). A bed design that was developed for a UTAS military application, and considered for a potential ISS application with the Urine Processor Assembly, provided a low pressure drop means for water maintenance in a recirculation loop. The bed design is coupled with high capacity ion exchange resins, organic adsorbents, and a cyclic methodology developed for the Extravehicular Mobility Unit (EMU) Transport Water loop. The maintenance cycle included the use of a biocide delivery component developed for ISS to introduce a biocide in a microgravity-compatible manner for the Internal Active Thermal Control System (IATCS). The leveraging of these water maintenance technologies to the SWME recirculation loop is a unique demonstration of applying the valuable lessons learned on the ISS to the next generation of manned spaceflight Environmental Control and Life Support System (ECLSS) hardware.

  10. Performance of Water Recirculation Loop Maintenance Components for the Advanced Spacesuit Water Membrane Evaporator

    Science.gov (United States)

    Rector, Tony; Peyton, Barbara M.; Steele, John W.; Makinen, Janice; Bue, Grant C.; Campbell, Colin

    2014-01-01

    Water loop maintenance components to maintain the water quality of the Advanced Spacesuit Water Membrane Evaporation (SWME) water recirculation loop have undergone a comparative performance evaluation with a second SWME water recirculation loop with no water quality maintenance. Results show the benefits of periodic water maintenance. The SWME is a heat rejection device under development at the NASA Johnson Space Center to perform thermal control for advanced spacesuits. One advantage to this technology is the potential for a significantly greater degree of tolerance to contamination when compared to the existing Sublimator technology. The driver for the evaluation of water recirculation maintenance components was to further enhance this advantage through the leveraging of fluid loop management lessons learned from the International Space Station (ISS). A bed design that was developed for a UTAS military application, and considered for a potential ISS application with the Urine Processor Assembly, provided a low pressure drop means for water maintenance in a recirculation loop. The bed design is coupled with high capacity ion exchange resins, organic adsorbents, and a cyclic methodology developed for the Extravehicular Mobility Unit (EMU) Transport Water loop. The maintenance cycle included the use of a biocide delivery component developed for ISS to introduce a biocide in a microgravity compatible manner for the Internal Active Thermal Control System (IATCS). The leveraging of these water maintenance technologies to the SWME recirculation loop is a unique demonstration of applying the valuable lessons learned on the ISS to the next generation of manned spaceflight Environmental Control and Life Support System (ECLSS) hardware.

  11. Integrating palliative care in the surgical and trauma intensive care unit: a report from the Improving Palliative Care in the Intensive Care Unit (IPAL-ICU) Project Advisory Board and the Center to Advance Palliative Care.

    Science.gov (United States)

    Mosenthal, Anne C; Weissman, David E; Curtis, J Randall; Hays, Ross M; Lustbader, Dana R; Mulkerin, Colleen; Puntillo, Kathleen A; Ray, Daniel E; Bassett, Rick; Boss, Renee D; Brasel, Karen J; Campbell, Margaret; Nelson, Judith E

    2012-04-01

    Although successful models for palliative care delivery and quality improvement in the intensive care unit have been described, their applicability in surgical intensive care unit settings has not been fully addressed. We undertook to define specific challenges, strategies, and solutions for integration of palliative care in the surgical intensive care unit. We searched the MEDLINE database from inception to May 2011 for all English language articles using the term "surgical palliative care" or the terms "surgical critical care," "surgical ICU," "surgeon," "trauma" or "transplant," and "palliative care" or "end-of- life care" and hand-searched our personal files for additional articles. Based on review of these articles and the experiences of our interdisciplinary expert Advisory Board, we prepared this report. We critically reviewed the existing literature on delivery of palliative care in the surgical intensive care unit setting focusing on challenges, strategies, models, and interventions to promote effective integration of palliative care for patients receiving surgical critical care and their families. Characteristics of patients with surgical disease and practices, attitudes, and interactions of different disciplines on the surgical critical care team present distinctive issues for intensive care unit palliative care integration and improvement. Physicians, nurses, and other team members in surgery, critical care and palliative care (if available) should be engaged collaboratively to identify challenges and develop strategies. "Consultative," "integrative," and combined models can be used to improve intensive care unit palliative care, although optimal use of trigger criteria for palliative care consultation has not yet been demonstrated. Important components of an improvement effort include attention to efficient work systems and practical tools and to attitudinal factors and "culture" in the unit and institution. Approaches that emphasize delivery of

  12. Incorporating a Comprehensive Drama Unit including a Theatre of the Absurd Component within the Advanced Placement English Program for Senior Level Students.

    Science.gov (United States)

    Konaxis, Antoinette

    This practicum was designed to increase the experiences in the genre of world drama, to further develop student understanding of its evolution and impact on subsequently created drama, and to proffer a diverse collection of drama for senior level students pursuing the Advanced Placement (AP) English literature program. A comprehensive curriculum,…

  13. Project ALPHA (Advanced Learning Program in the Humanities and Arts): Creativity in Filmmaking. A Study Unit Designed for Education of the Gifted in the Humanities and the Arts.

    Science.gov (United States)

    Le Storti, Anthony J.

    Designed for senior high gifted and creative students, the unit focuses on developing creativity in imagery production and technical skills in filmmaking. Five lessons provide information on objectives, materials, and presentation activities for the following topics: color, dialogue, score, angles and shots, film critique, creative imagery, and…

  14. Development of Filter-Blower Unit for use in the Advanced Nuclear Biological Chemical Protection System (ANBCPS) Helicopter/Transport-aircraft version

    NARCIS (Netherlands)

    Sabel, R.; Reffeltrath, P.A.; Jonkman, A.; Post, T.

    2006-01-01

    As a participant in the three-nation partnership for development of the ANBCP-S for use in Helicopters, Transport Aircraft and Fast Jet, the Royal Netherlands Airforce (RNLAF) picked up the challenge to design a Filter- Blower-Unit (FBU). Major Command (MajCom) of the RNLAF set priority to develop a

  15. Development of Filter-Blower Unit for use in the Advanced Nuclear Biological Chemical Protection System (ANBCPS) Helicopter/Transport-aircraft version

    NARCIS (Netherlands)

    Sabel, R.; Reffeltrath, P.A.; Jonkman, A.; Post, T.

    2006-01-01

    As a participant in the three-nation partnership for development of the ANBCP-S for use in Helicopters, Transport Aircraft and Fast Jet, the Royal Netherlands Airforce (RNLAF) picked up the challenge to design a Filter- Blower-Unit (FBU). Major Command (MajCom) of the RNLAF set priority to develop a

  16. Estimation of carbon dioxide emissions per urban center link unit using data collected by the Advanced Traffic Information System in Daejeon, Korea

    Science.gov (United States)

    Ryu, B. Y.; Jung, H. J.; Bae, S. H.; Choi, C. U.

    2013-12-01

    CO2 emissions on roads in urban centers substantially affect global warming. It is important to quantify CO2 emissions in terms of the link unit in order to reduce these emissions on the roads. Therefore, in this study, we utilized real-time traffic data and attempted to develop a methodology for estimating CO2 emissions per link unit. Because of the recent development of the vehicle-to-infrastructure (V2I) communication technology, data from probe vehicles (PVs) can be collected and speed per link unit can be calculated. Among the existing emission calculation methodologies, mesoscale modeling, which is a representative modeling measurement technique, requires speed and traffic data per link unit. As it is not feasible to install fixed detectors at every link for traffic data collection, in this study, we developed a model for traffic volume estimation by utilizing the number of PVs that can be additionally collected when the PV data are collected. Multiple linear regression and an artificial neural network (ANN) were used for estimating the traffic volume. The independent variables and input data for each model are the number of PVs, travel time index (TTI), the number of lanes, and time slots. The result from the traffic volume estimate model shows that the mean absolute percentage error (MAPE) of the ANN is 18.67%, thus proving that it is more effective. The ANN-based traffic volume estimation served as the basis for the calculation of emissions per link unit. The daily average emissions for Daejeon, where this study was based, were 2210.19 ton/day. By vehicle type, passenger cars accounted for 71.28% of the total emissions. By road, Gyeryongro emitted 125.48 ton/day, accounting for 5.68% of the total emission, the highest percentage of all roads. In terms of emissions per kilometer, Hanbatdaero had the highest emission volume, with 7.26 ton/day/km on average. This study proves that real-time traffic data allow an emissions estimate in terms of the link unit

  17. Analysis of torque transmitting behavior and wheel slip prevention control during regenerative braking for high speed EMU trains

    Science.gov (United States)

    Xu, Kun; Xu, Guo-Qing; Zheng, Chun-Hua

    2016-04-01

    The wheel-rail adhesion control for regenerative braking systems of high speed electric multiple unit trains is crucial to maintaining the stability, improving the adhesion utilization, and achieving deep energy recovery. There remain technical challenges mainly because of the nonlinear, uncertain, and varying features of wheel-rail contact conditions. This research analyzes the torque transmitting behavior during regenerative braking, and proposes a novel methodology to detect the wheel-rail adhesion stability. Then, applications to the wheel slip prevention during braking are investigated, and the optimal slip ratio control scheme is proposed, which is based on a novel optimal reference generation of the slip ratio and a robust sliding mode control. The proposed methodology achieves the optimal braking performance without the wheel-rail contact information. Numerical simulation results for uncertain slippery rails verify the effectiveness of the proposed methodology.

  18. Advanced biliary tract cancer: clinical outcomes with ABC-02 regimen and analysis of prognostic factors in a tertiary care center in the United States

    Science.gov (United States)

    Agarwal, Rishi; Sendilnathan, Arun; Siddiqi, Nabeela Iffat; Gulati, Shuchi; Ghose, Abhimanyu; Xie, Changchun

    2016-01-01

    Background Gemcitabine plus cisplatin (GC) is currently the standard regimen for advanced biliary tract cancers (BTC) based on the outcomes in ABC-02 trial. Multiple factors can affect outcomes in these patients. This retrospective review evaluates the University of Cincinnati experience with GC in advanced intrahepatic (IHC)/extrahepatic cholangiocarcinoma (EHC) and gall bladder carcinoma (GBC). Methods In this study approved by University of Cincinnati IRB, retrospective analysis of advanced BTC patients seen between 01/2008 and 01/2015 was done. Kaplan Meyer method was used to calculate progression free survival (PFS), and overall survival (OS). Cox model was used to test the association between baseline variables and OS/PFS, adjusting for gender and age at diagnosis. Patients were identified using ICD code for BT tumors, 26 patients met inclusion criteria: histologically proven advanced BTC that received GC as their initial chemotherapy. GC was given as per ABC-02 protocol with appropriate modifications until disease progression or unacceptable toxicities. Results Median age at diagnosis was 62 years (range, 31–81 years). Eighteen (69%) were IHC, 5 EHC, 3 GBC, 61% male, 73% whites. Performance status (PS): 0–1: 69%, PS 2: 31%. Baseline CA19-9 data was available for 21 patients, (range 1 to 69,543), and abnormal CA19-9 was seen in 14 patients (54%). PFS was 4.5 months (95% CI: 3.1–8.9 months) and OS was 10.5 months (95% CI: 7.9–18.8 months). OS at 6 and 12 months was 69% (18/26) and 42% (11/26). Thirty-eight percent (10/26) received 2nd line chemotherapy, of these 9/10 received 5FU based chemotherapy. Eleven percent (3/26) received 3rd line chemotherapy. Increase in baseline carcinoembryonic antigen (CEA), alanine aminotransferase, alkaline phosphatase (ALP) and total bilirubin was associated with increased risk of death while increase in baseline CEA and ALP was associated with increased risk of progression (P valve 3, and stage IVb), the median

  19. Advanced stimulation technology deployment program: Unocal Corporation, Dakota and Mesaverde formations, Rincon Unit, San Juan Basin. Topical report, June 1995-February 1996

    Energy Technology Data Exchange (ETDEWEB)

    Wright, C.A.; Weijers, L.; Minner, W.A.

    1996-06-01

    Pinnacle Technologies successfully deployed AST to numerous engineers from Unocal. Unocal estimated an 11% reduction in completion costs after implementing AST on their hydraulic fracture treatments in the Rincon Unit, New Mexico, resulting in a total cost savings of $850,000 on 25 wells. Despite the poorer geology of the newly completed wells, well productivity was equivalent to the older wells with `conventional` fracture treatment designs. Pressure build-up tests also confirmed the improved fracture treatment results: propped fractures of AST-treatments appeared at least twice as long as fractures from conventional treatments, even though completion costs have been reduced.

  20. Next Generation Life Support Project: Development of Advanced Technologies for Human Exploration Missions

    Science.gov (United States)

    Barta, Daniel J.

    2012-01-01

    Next Generation Life Support (NGLS) is one of several technology development projects sponsored by the National Aeronautics and Space Administration s Game Changing Development Program. NGLS is developing life support technologies (including water recovery, and space suit life support technologies) needed for humans to live and work productively in space. NGLS has three project tasks: Variable Oxygen Regulator (VOR), Rapid Cycle Amine (RCA) swing bed, and Alternative Water Processing. The selected technologies within each of these areas are focused on increasing affordability, reliability, and vehicle self sufficiency while decreasing mass and enabling long duration exploration. The RCA and VOR tasks are directed at key technology needs for the Portable Life Support System (PLSS) for an Exploration Extravehicular Mobility Unit (EMU), with focus on prototyping and integrated testing. The focus of the Rapid Cycle Amine (RCA) swing-bed ventilation task is to provide integrated carbon dioxide removal and humidity control that can be regenerated in real time during an EVA. The Variable Oxygen Regulator technology will significantly increase the number of pressure settings available to the space suit. Current spacesuit pressure regulators are limited to only two settings while the adjustability of the advanced regulator will be nearly continuous. The Alternative Water Processor efforts will result in the development of a system capable of recycling wastewater from sources expected in future exploration missions, including hygiene and laundry water, based on natural biological processes and membrane-based post treatment. The technologies will support a capability-driven architecture for extending human presence beyond low Earth orbit to potential destinations such as the Moon, near Earth asteroids and Mars.

  1. Foreign-trained dentists in advanced education in prosthodontics programs in the United States: demographics, perspectives on current training, and future goals.

    Science.gov (United States)

    Al-Sowygh, Zeyad H; Sukotjo, Cortino

    2011-02-01

    This study investigated the perspectives of foreign-trained dentists (FTDs) in comparison with US-trained Dentists (USTDs) in Advanced Education in Prosthodontics (AEP) programs on their current clinical training and future goals. This study was conducted by analyzing data from previously published literature. When appropriate, Chi-square statistical analysis was conducted to determine the influence of where the AEP residents earned their DMD/DDS degree (FTDs/USTDs) on all variables. Only results that yielded significant differences were discussed. A majority of both FTDs and USTDs were male. Most USTDs were married, while most FTDs were single. Most FTDs were not US citizens and most originated from Asia, followed by the Middle East, South America, and Europe. Significantly more FTDs had higher ranks in their dental schools, had more advanced degrees, and spent more time practicing before entering the AEP programs. In selecting AEP programs, FTDs placed significantly higher values on a program's reputation and research opportunities. During their AEP training, FTDs paid significantly higher tuition and received lower stipends, but obtained more financial support from families. On the other hand, USTDs received significantly more financial aid and earned income from part-time work, but had significantly higher total educational debts. USTDs showed a significantly higher interest in becoming a student member of the American College of Prosthodontists and participated actively in prosthodontics organizations. USTDs were more interested in becoming maxillofacial prosthodontists, while FTDs were more interested in pursuing academic careers. FTDs differed from USTDs in several ways. Because of their interests in academics and research, FTDs may potentially have a positive impact on the development of the prosthodontics discipline. This information may be beneficial for AEP program directors in accommodating the needs of FTDs, and for FTDs in better preparing for their

  2. 齿轮传动比对动车组牵引特性的影响%Research and Simulation on Effect of Gear Ratio on High-Speed EMU Tractive Characterisation

    Institute of Scientific and Technical Information of China (English)

    张川宝; 汤钰鹏

    2011-01-01

    In order to solve the gear box leakage of EMU during running, the tractive characterisation and control method of EMU were analyzed. Through the changes of gear ratio and characteristic line for traction, the tractive motor speed can be altered. Matlab/Simulink simulation results show that the smaller gear ratio can decrease the tractive motor speed, and the output torque and current of the tractive motor can fulfill the running demand of the high-speed EMU.%为了解决CRH3-350动车组运行过程中出现的齿轮箱渗油问题,对动车组牵引特性和控制方法进行了分析.通过改变齿轮传动比和动车组牵引特性控制曲线,可以改变牵引电机转速.Maflab/Simulink仿真结果表明,齿轮传动比的减小可以降低牵引电机转速,而牵引电机输出转矩和电流也能满足动车组运行要求.

  3. 单元机组协调控制系统研究进展%Advances in Research of Coordinated Control System for Power Units

    Institute of Scientific and Technical Information of China (English)

    刘保瑞; 安惠欣; 崔锐; 陈立军

    2012-01-01

    单元机组协调控制系统是一个很重要的典型复杂热工系统,对其进行有效的控制一直是电力行业研究的热点。从线性系统理论、非线性系统理论和智能化方法等三个方面总结了单元机组协调控制系统的研究成果及发展现状,指出存在的问题和解决途径,为单元机组协调控制系统的深入研究提供有益的参考。%Unit coordinated control system is a very important typical complex thermal power engineering system, to carry on the effective control is always the focus of electric power industry research, this article from linear system theory and nonlinear system theory and intelligent method three aspects summarize the research results and present status of unit coordinated control system, the deficiencies of several control methods and the way for solving the problems are pointed out. The paper provides someuseful references for the continuous deep study CCS.

  4. Identifying the Drivers and Occurrence of Historical and Future Extreme Air-quality Events in the United States Using Advanced Statistical Techniques

    Science.gov (United States)

    Porter, W. C.; Heald, C. L.; Cooley, D. S.; Russell, B. T.

    2013-12-01

    Episodes of air-quality extremes are known to be heavily influenced by meteorological conditions, but traditional statistical analysis techniques focused on means and standard deviations may not capture important relationships at the tails of these two respective distributions. Using quantile regression (QR) and extreme value theory (EVT), methodologies specifically developed to examine the behavior of heavy-tailed phenomena, we analyze extremes in the multi-decadal record of ozone (O3) and fine particulate matter (PM2.5) in the United States. We investigate observations from the Air Quality System (AQS) and Interagency Monitoring of Protected Visual Environments (IMPROVE) networks for connections to meteorological drivers, as provided by the National Center for Environmental Prediction (NCEP) North American Regional Reanalysis (NARR) product. Through regional characterization by quantile behavior and EVT modeling of the meteorological covariates most responsible for extreme levels of O3 and PM2.5, we estimate pollutant exceedance frequencies and uncertainties in the United States under current and projected future climates, highlighting those meteorological covariates and interactions whose influence on air-quality extremes differs most significantly from the behavior of the bulk of the distribution. As current policy may be influenced by air-quality projections, we then compare these estimated frequencies to those produced by NCAR's Community Earth System Model (CESM) identifying regions, covariates, and species whose extreme behavior may not be adequately captured by current models.

  5. 舱外航天服热试验方法研究%Research on Thermal Test Methods for Extravehicular Mobility Unit

    Institute of Scientific and Technical Information of China (English)

    范含林; 孙萌; 李潭秋; 吴志强; 张堪; 潘维

    2009-01-01

    舱外航天服采用主被动相结合的热控方式控制内部的温度,但其外形复杂,影响外热流的因素很多,因此舱外航天服热试验存在着与传统航天器热试验完全不同的特点.文章根据舱外航天服热设计的特点,对舱外航天服的地面热试验方法进行了比较分析和研究,论证了采用等效外热流模拟方法,通过进行舱外航天服系统漏热和散热能力的测试来验证热设计方法的合理性及热试验方法的可行性.%Active thermal control technologies were used in extravehicular mobility unit (EMU). The configuration of EMU is complicated and there are many influence factors on reaching heat flux. The thermal test for EMU had the different characters with that of traditional space probe. Different simulation methods of EMU thermal test were presented, based on the characteristics of the thermal design. It's feasible to validate the thermal design by equivalently simulating the space heat flux as the test thermal boundary and measuring the heat leakage of the EMU and heat dissipation ability.

  6. Advanced Reservoir Characterization and Development through High-Resolution 3C3D Seismic and Horizontal Drilling: Eva South Marrow Sand Unit, Texas County, Oklahoma

    Energy Technology Data Exchange (ETDEWEB)

    Wheeler,David M.; Miller, William A.; Wilson, Travis C.

    2002-03-11

    The Eva South Morrow Sand Unit is located in western Texas County, Oklahoma. The field produces from an upper Morrow sandstone, termed the Eva sandstone, deposited in a transgressive valley-fill sequence. The field is defined as a combination structural stratigraphic trap; the reservoir lies in a convex up -dip bend in the valley and is truncated on the west side by the Teepee Creek fault. Although the field has been a successful waterflood since 1993, reservoir heterogeneity and compartmentalization has impeded overall sweep efficiency. A 4.25 square mile high-resolution, three component three-dimensional (3C3D) seismic survey was acquired in order to improve reservoir characterization and pinpoint the optimal location of a new horizontal producing well, the ESU 13-H.

  7. Orthognathic Surgery Patients (Maxillary Impaction and Setback plus Mandibular Advancement plus Genioplasty) Need More Intensive Care Unit (ICU) Admission after Surgery

    Science.gov (United States)

    Eftekharian, Hamidreza; Zamiri, Barbad; Ahzan, Shamseddin; Talebi, Mohamad; Zarei, Kamal

    2015-01-01

    Statement of the Problem: Due to shortage of ICU beds in hospitals, knowing what kind of orthognathic surgery patients more need ICU care after surgery would be important for surgeons and hospitals to prevent unnecessary ICU bed reservation. Purpose: The aim of the present study was to determine what kinds of orthognathic surgery patients would benefit more from ICU care after surgery. Materials and Method: 210 patients who were admitted to Chamran Hospital, Shiraz, for bimaxillary orthognathic surgery (2008-2013) were reviewed based on whether they had been admitted to ICU or maxillofacial surgery ward. Operation time, sex, intraoperative Estimated Blood Loss (EBL), postoperative complications, ICU admission, and unwanted complications resulting from staying in ICU were assessed. Results: Of 210 patients undergoing bimaxillary orthognathic surgery, 59 patients (28.1%) were postoperatively admitted to the ICU and 151 in the maxillofacial ward (71.9%). There was not statistically significant difference in age and sex between the two groups (p> 0.05). The groups were significantly different in terms of operation time (p< 0.001). Blood loss For ICU admitted patients was 600.00±293.621mL and for those who were hospitalized in the ward was 350.00±298.397 mL. Statistically significant differences were found between the two groups (p< 0.001). Moreover, there was a direct linear correlation between operation time and intraoperative estimated blood loss and this relationship was statistically significant (r=0.42, p< 0.001). Patients with maxillary impaction and setback plus mandibular advancement plus genioplasty were among the most ICU admitted patients (44%), while these patients were only 20% of all patients who were admitted to the ward. As a final point, the result illustrated that patients who were admitted to the ICU experienced more complication such as bleeding, postoperative nausea, and pain (p< 0.001). Conclusion: Orthognathic surgery patients (maxillary

  8. Orthognathic Surgery Patients (Maxillary Impaction and Setback Plus Mandibular Advancement Plus Genioplasty Need More Intensive Care Unit (ICU Admission after Surgery

    Directory of Open Access Journals (Sweden)

    Hamidreza Eftekharian

    2015-03-01

    Full Text Available Statement of the Problem: Due to shortage of ICU beds in hospitals, knowing what kind of orthognathic surgery patients more need ICU care after surgery would be important for surgeons and hospitals to prevent unnecessary ICU bed reservation. Purpose: The aim of the present study was to determine what kinds of orthognathic surgery patients would benefit more from ICU care after surgery. Materials and Method: 210 patients who were admitted to Chamran Hospital, Shiraz, for bimaxillary orthognathic surgery (2008-2013 were reviewed based on whether they had been admitted to ICU or maxillofacial surgery ward. Operation time, sex, intraoperative Estimated Blood Loss (EBL, postoperative complications, ICU admission, and unwanted complications resulting from staying in ICU were assessed. Results: Of 210 patients undergoing bimaxillary orthognathic surgery, 59 patients (28.1% were postoperatively admitted to the ICU and 151 in the maxillofacial ward (71.9%. There was not statistically significant difference in age and sex between the two groups (p> 0.05. The groups were significantly different in terms of operation time (p< 0.001. Blood loss For ICU admitted patients was 600.00±293.621mL and for those who were hospitalized in the ward was 350.00±298.397 mL. Statistically significant differences were found between the two groups (p< 0.001. Moreover, there was a direct linear correlation between operation time and intraoperative estimated blood loss and this relationship was statistically significant (r=0.42, p< 0.001. Patients with maxillary impaction and setback plus mandibular advancement plus genioplasty were among the most ICU admitted patients (44%, while these patients were only 20% of all patients who were admitted to the ward. As a final point, the result illustrated that patients who were admitted to the ICU experienced more complication such as bleeding, postoperative nausea, and pain (p< 0.001. Conclusion: Orthognathic surgery patients

  9. Dynamic Modeling of Learning in Emerging Energy Industries: The Example of Advanced Biofuels in the United States; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Steve; Bush, Brian; Vimmerstedt, Laura

    2015-07-19

    This paper (and its supplemental model) presents novel approaches to modeling interactions and related policies among investment, production, and learning in an emerging competitive industry. New biomass-to-biofuels pathways are being developed and commercialized to support goals for U.S. advanced biofuel use, such as those in the Energy Independence and Security Act of 2007. We explore the impact of learning rates and techno-economics in a learning model excerpted from the Biomass Scenario Model (BSM), developed by the U.S. Department of Energy and the National Renewable Energy Laboratory to explore the impact of biofuel policy on the evolution of the biofuels industry. The BSM integrates investment, production, and learning among competing biofuel conversion options that are at different stages of industrial development. We explain the novel methods used to simulate the impact of differing assumptions about mature industry techno-economics and about learning rates while accounting for the different maturity levels of various conversion pathways. A sensitivity study shows that the parameters studied (fixed capital investment, process yield, progress ratios, and pre-commercial investment) exhibit highly interactive effects, and the system, as modeled, tends toward market dominance of a single pathway due to competition and learning dynamics.

  10. Measuring the influence of a mental health training module on the therapeutic optimism of advanced nurse practitioner students in the United Kingdom.

    Science.gov (United States)

    Hemingway, Steve; Rogers, Melanie; Elsom, Stephen

    2014-03-01

    To evaluate the influence of a mental health training module on the therapeutic optimism of advanced nurse practitioner (ANP) students in primary care (family practice). Three cohorts of ANPs who undertook a Mental Health Problems in Primary Care Module as part of their MSc ANP (primary care) run by the University of Huddersfield completed the Elsom Therapeutic Optimism Scale (ETOS), in a pre- and postformat. The ETOS is a 10-item, self-administered scale, which has been used to evaluate therapeutic optimism previously in mental health professionals. All three cohorts who completed the scale showed an improvement in their therapeutic optimism scores. With stigma having such a detrimental effect for people diagnosed with a mental health problem, ANPs who are more mental health literate facilitated by education and training in turn facilitates them to have the skills and confidence to engage and inspire hope for the person diagnosed with mental health problems. ©2013 The Author(s) ©2013 American Association of Nurse Practitioners.

  11. Low-fasting triglyceride levels are associated with non-invasive markers of advanced liver fibrosis among adults in the United States.

    Science.gov (United States)

    Jiang, Z G; Tsugawa, Y; Tapper, E B; Lai, M; Afdhal, N; Robson, S C; Mukamal, K J

    2015-07-01

    Elevated fasting triglyceride is often associated with metabolic syndrome and non-alcoholic fatty liver disease (NAFLD), the most common form of chronic liver disease. On the other hand, as liver disease progresses, patients may develop hepatocellular dysfunction that impairs triglyceride production. To test the hypothesis that lower fasting triglyceride levels may paradoxically indicate more advanced liver disease. A cross-sectional analysis of 11 947 adults aged 20 years or older without chronic viral hepatitis from the National Health and Nutrition Examination Survey 1999-2010 was performed to analyze the relationships between fasting triglyceride levels and five validated non-invasive indices of liver fibrosis, including Fibrosis 4 Score (FIB4), NAFLD Fibrosis Score (NFS), Ast-Platelet Ration Index, AST/ALT ratio and BARD. Low-fasting triglyceride levels were consistently associated with elevated liver fibrosis indices. Individuals in the lowest quintile of triglycerides (TG) had an adjusted odds ratio (OR) of 3.0 (95% CI, 1.7-5.2; P triglyceride levels were inversely associated with liver fibrosis indicators in American adults, especially among white men. Our findings suggest that sequential lipid measurements may serve as a useful disease marker in the management of chronic liver disease patients. © 2015 John Wiley & Sons Ltd.

  12. Research on EMU Mechanics Competency and Its Impact on Safety Performance%动车组机械师胜任特征及其对安全绩效的影响研究

    Institute of Scientific and Technical Information of China (English)

    张荔函; 叶龙; 褚福磊

    2013-01-01

    In order to bring up right talents to railway key positions,enhance the quality of personnel skills and safety performance,ensure the trouble-free operation of EMU,indicators of EMU mechanics competency were identified using behavioral event interview.A 5-dimension EMU mechanics competency model was built,with 18 competency indicators,by using exploratory factor analysis and confirmatory factor analysis.The 5 dimensions are psychological quality,ability quality,knowledge quality,professional quality and physiological quality.Impact of EMU mechanics competency on safety performance and its prediction were studied by correlation analysis and regression analysis.The results show that a significant positive correlation exists by and large between safety performance,safety task performance,or safety surrounding performance of EMU mechanics and the overall level of competency,or each of the dimensions,and that different dimensions influence prediction of safety performance,safety task performance and safety surrounding performance differently.%为确保动车组列车安全运行,采用行为事件访谈法,获取动车组机械师胜任特征指标.运用探索性因素分析和验证性因素分析方法,构建包括心理素质、能力素质、知识水平、职业品质、生理素质5个维度、18个胜任特征指标的动车组机械师胜任特征模型.通过相关分析和回归分析,探讨了动车组机械师胜任特征对安全绩效的影响及在绩效预测中的作用.结果表明,动车组机械师安全绩效、安全任务绩效、安全周边绩效与胜任特征整体水平和各维度之间大部分存在显著正相关,不同维度的胜任特征在动车组机械师安全绩效、安全任务绩效、安全周边绩效的预测中的作用存在差异.

  13. Integrated Advanced Microwave Sounding Unit-A (AMSU-A. Engineering Report: Electromagnetic Interface (EMI)/Electromagnetic Radiation (EMR) and Electromagnetic Compatibility (EMC), for the METSAT/METOP AMSU-A1

    Science.gov (United States)

    Valdez, A.

    1999-01-01

    This document contains the procedure and the test results of the Advanced Microwave Sounding Unit-A (AMSU-A) Electromagnetic Interference (EMI), Electromagnetic Susceptibility, and Electromagnetic Compatibility (EMC) qualification test for the Meteorological Satellite (METSAT) and the Meteorological Operation Platform (METOP) projects. The test was conducted in accordance with the approved EMI/EMC Test Plan/Procedure, Specification number AE-26151/5D. This document describes the EMI/EMC test performed by Aerojet and it is presented in the following manner: Section-1 contains introductory material and a brief summary of the test results. Section 2 contains more detailed descriptions of the test plan, test procedure, and test results for each type of EMI/EMC test conducted. Section 3 contains supplementary information that includes test data sheets, plots, and calculations collected during the qualification testing.

  14. Recent advances on glass-forming systems driven far from equilibrium. Special issue marking the completion of the Research Unit FOR 1394 `Nonlinear response to probe vitrification'

    Science.gov (United States)

    Fuchs, Matthias

    2017-08-01

    The nature of the glass transition is one of the frontier questions in Statistical Physics and Materials Science. Highly cooperative structural processes develop in glass-forming melts exhibiting relaxational dynamics which is spread out over many decades in time. While considerable progress has been made in recent decades towards understanding dynamical slowing-down in quiescent systems, the interplay of glassy dynamics with external fields reveals a wealth of novel phenomena yet to be explored. This special issue focuses on recent results obtained by the Research Unit FOR 1394 `Nonlinear response to probe vitrification' which was funded by the German Science Foundation (DFG). In the projects of the research unit, strong external fields were used in order to gain insights into the complex structural and transport phenomena at the glass transition under far-from-equilibrium conditions. This aimed inter alia to test theories of the glass transition developed for quiescent systems by pushing them beyond their original regime. Combining experimental, simulational, and theoretical efforts, the eight projects within the FOR 1394 measured and determined aspects of the nonlinear response of supercooled metallic, polymeric, and silica melts, of colloidal dispersions, and of ionic liquids. Applied fields included electric and mechanic fields, and forced active probing (`micro-rheology'), where a single probe is forced through the glass-forming host. Nonlinear stress-strain and force-velocity relations as well as nonlinear dielectric susceptibilities and conductivities were observed. While the physical manipulation of melts and glasses is interesting in its own right, especially technologically, the investigations performed by the FOR 1394 suggest to use the response to strong homogeneous and inhomogeneous fields as technique to explore on the microscopic level the cooperative mechanisms in dense melts of strongly interacting constituents. Questions considered concern the

  15. Three-Dimensional Joint Geophysical Imaging Using an Advanced Multivariate Inversion Technique: the Method and its Application to the Utah area, United States

    Science.gov (United States)

    Zhang, Haijiang; Maceira, Monica; Benson, Thomas; Nafi Toksoz, M.

    2010-05-01

    We present an advanced multivariate inversion technique to generate a realistic, comprehensive, and high-resolution 3D model of the seismic structure of the crust and upper mantle. The model satisfies several independent geophysical datasets including seismic surface wave dispersion measurements, gravity, and seismic arrival time. The joint inversion method takes advantage of strengths of individual data sets and is able to better constrain the seismic velocity models from shallower to greater depths. To combine different geophysical datasets into a common system, we design an optimal weighting scheme that is based on relative uncertainties of individual observations, their sensitivities to model parameters, and the trade-off of different data fitting. We apply this joint inversion method to determine the 3D Vp and Vs models of the Utah area. The seismic body wave arrival times are assembled from waveform data recorded by the University of Utah Seismograph Stations (UUSS) regional network and the EarthScope/USArray network. The surface wave dispersion measurements are obtained from the ambient noise tomography study by the University of Colorado group using EarthScope/USArray stations. The gravity data for the Utah area is extracted from the North American Gravity Database managed by the University of Texas at El Paso. The joint inversions using two individual data sets such as seismic arrival time and gravity data, as well as seismic surface wave and gravity data indicate strong low velocity anomalies in middle crust beneath some known geothermal sites in Utah. The joint inversion of all three data sets will be presented and is expected to produce a reasonably well-constrained velocity structure of the Utah area, which is helpful for characterizing and exploring existing and potential geothermal reservoirs.

  16. Mobil pilot unit of the advanced oxidation process for waste water treatment and reuse of the hydrics effluents; Unidade piloto movel de processo oxidativo avancado aplicado a tratamento e reuso de efluentes hidricos

    Energy Technology Data Exchange (ETDEWEB)

    Geraldo, Lucia Maria Limoeiro; Pereira Junior, Oswaldo de Aquino; Henriques, Sheyla de Oliveira Carvalho; Jacinto Junior, Agenor [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The chemical oxidation processes which generate free hydroxyl radicals are called Advanced Oxidation Process (AOP). These processes have been studied, in the last decades, as a new alternative for pollutants degradation. In the (AOP)'s there are in situ formation of hydroxyl radicals (OH{center_dot}), which are highly oxidant. Its high oxidation strength becomes it indicated in the treatment of effluent with highly refractory contaminants. It can be used as a partial treatment (taking the effluent to more degradable compounds), as a final treatment (taking the effluent to complete mineralization) or as a complementary treatment to other processes, allowing, for example, its reuse. The applicability of this technology in oily water effluents in all segments of the oil industry, has taken to the development, in the LARA (Laboratory of Treatment and Reuse of Waters - CENPES), of the Advanced Oxidation Process Mobile Pilot Unit (AOP's- MU) with capacity up to 1 m3/h. The (AOP's- MU) are able to produce hydroxyl radical from Fenton's reaction, titanium dioxide heterogeneous photo catalysis and hydrogen peroxide, photo-radiated or not. It is equipped with ultraviolet reactors of different wave lengths and power. (author)

  17. Advanced bifunctional electrocatalyst generated through cobalt phthalocyanine tetrasulfonate intercalated Ni2Fe-layered double hydroxides for a laminar flow unitized regenerative micro-cell

    Science.gov (United States)

    Zhong, Haihong; Tian, Ran; Gong, Xiaoman; Li, Dianqing; Tang, Pinggui; Alonso-Vante, Nicolas; Feng, Yongjun

    2017-09-01

    We fabricated a NiFeOx/CoNy-C nanocomposite derived from CoPcTs-intercalated Ni2Fe-layered double hydroxides (Ni2Fe-CoPcTs-LDH), which served as high-efficiency, low-cost, and long-durability bifunctional oxygen electrocatalyst in half-cell, and a H2-O2 laminar flow unitized regenerative micro-cell (LFURMC) in alkaline media. Based on the synergistic effect between Co-Ny and NiFeOx centers, the non-noble hybrid catalyst NiFeOx/CoNy-C achieves a ΔE (η@jOER,10 - η@jORR,-3) = 0.84 V in alkaline solution, outperforming the commercial Pt/C, and very close to that of IrOx/C. In the fuel cell mode, the performance of NiFeOx/CoNy-C with the maximum power density of 56 mW cm-2 is similar to that of Pt/C (63 mW cm-2) and IrOx/C (58 mW cm-2); in the electrolysis mode, the calculated maximum electrical power consumed on NiFeOx/CoNy-C (237 mW cm-2) is more than 3 times that on Pt/C (73 mW cm-2), similar with that of IrOx/C. More importantly, the NiFeOx/CoNy-C shows a remarkable stability in alternating modes in a LFURMC system.

  18. Flipping the advanced cardiac life support classroom with team-based learning: comparison of cognitive testing performance for medical students at the University of California, Irvine, United State

    Science.gov (United States)

    2016-01-01

    Purpose: It aimed to find if written test results improved for advanced cardiac life support (ACLS) taught in flipped classroom/team-based Learning (FC/TBL) vs. lecture-based (LB) control in University of California-Irvine School of Medicine, USA. Methods: Medical students took 2010 ACLS with FC/TBL (2015), compared to 3 classes in LB (2012-14) format. There were 27.5 hours of instruction for FC/TBL model (TBL 10.5, podcasts 9, small-group simulation 8 hours), and 20 (12 lecture, simulation 8 hours) in LB. TBL covered 13 cardiac cases; LB had none. Seven simulation cases and didactic content were the same by lecture (2012-14) or podcast (2015) as was testing: 50 multiple-choice questions (MCQ), 20 rhythm matchings, and 7 fill-in clinical cases. Results: 354 students took the course (259 [73.1%] in LB in 2012-14, and 95 [26.9%] in FC/TBL in 2015). Two of 3 tests (MCQ and fill-in) improved for FC/TBL. Overall, median scores increased from 93.5% (IQR 90.6, 95.4) to 95.1% (92.8, 96.7, P=0.0001). For the fill-in test: 94.1% for LB (89.6, 97.2) to 96.6% for FC/TBL (92.4, 99.20 P=0.0001). For MC: 88% for LB (84, 92) to 90% for FC/TBL (86, 94, P=0.0002). For the rhythm test: median 100% for both formats. More students failed 1 of 3 tests with LB vs. FC/TBL (24.7% vs. 14.7%), and 2 or 3 components (8.1% vs. 3.2%, P=0.006). Conversely, 82.1% passed all 3 with FC/TBL vs. 67.2% with LB (difference 14.9%, 95% CI 4.8-24.0%). Conclusion: A FC/TBL format for ACLS marginally improved written test results. PMID:26893399

  19. Flipping the advanced cardiac life support classroom with team-based learning: comparison of cognitive testing performance for medical students at the University of California, Irvine, United States

    Directory of Open Access Journals (Sweden)

    Megan Boysen-Osborn

    2016-02-01

    Full Text Available Purpose: It aimed to find if written test results improved for advanced cardiac life support (ACLS taught in flipped classroom/team-based Learning (FC/TBL vs. lecture-based (LB control in University of California-Irvine School of Medicine, USA. Methods: Medical students took 2010 ACLS with FC/TBL (2015, compared to 3 classes in LB (2012-14 format. There were 27.5 hours of instruction for FC/TBL model (TBL 10.5, podcasts 9, small-group simulation 8 hours, and 20 (12 lecture, simulation 8 hours in LB. TBL covered 13 cardiac cases; LB had none. Seven simulation cases and didactic content were the same by lecture (2012-14 or podcast (2015 as was testing: 50 multiple-choice questions (MCQ, 20 rhythm matchings, and 7 fill-in clinical cases. Results: 354 students took the course (259 [73.1%] in LB in 2012-14, and 95 [26.9%] in FC/TBL in 2015. Two of 3 tests (MCQ and fill-in improved for FC/TBL. Overall, median scores increased from 93.5% (IQR 90.6, 95.4 to 95.1% (92.8, 96.7, P=0.0001. For the fill-in test: 94.1% for LB (89.6, 97.2 to 96.6% for FC/TBL (92.4, 99.20 P=0.0001. For MC: 88% for LB (84, 92 to 90% for FC/TBL (86, 94, P=0.0002. For the rhythm test: median 100% for both formats. More students failed 1 of 3 tests with LB vs. FC/TBL (24.7% vs. 14.7%, and 2 or 3 components (8.1% vs. 3.2%, P=0.006. Conversely, 82.1% passed all 3 with FC/TBL vs. 67.2% with LB (difference 14.9%, 95% CI 4.8-24.0%. Conclusion: A FC/TBL format for ACLS marginally improved written test results.

  20. An Evaluation of Selected Extraordinary Floods in the United States Reported by the U.S. Geological Survey and Implications for Future Advancement of Flood Science

    Science.gov (United States)

    Costa, John E.; Jarrett, Robert D.

    2008-01-01

    Thirty flood peak discharges determine the envelope curve of maximum floods documented in the United States by the U.S. Geological Survey. These floods occurred from 1927 to 1978 and are extraordinary not just in their magnitude, but in their hydraulic and geomorphic characteristics. The reliability of the computed discharge of these extraordinary floods was reviewed and evaluated using current (2007) best practices. Of the 30 flood peak discharges investigated, only 7 were measured at daily streamflow-gaging stations that existed when the flood occurred, and 23 were measured at miscellaneous (ungaged) sites. Methods used to measure these 30 extraordinary flood peak discharges consisted of 21 slope-area measurements, 2 direct current-meter measurements, 1 culvert measurement, 1 rating-curve extension, and 1 interpolation and rating-curve extension. The remaining four peak discharges were measured using combinations of culvert, slope-area, flow-over-road, and contracted-opening measurements. The method of peak discharge determination for one flood is unknown. Changes to peak discharge or rating are recommended for 20 of the 30 flood peak discharges that were evaluated. Nine floods retained published peak discharges, but their ratings were downgraded. For two floods, both peak discharge and rating were corrected and revised. Peak discharges for five floods that are subject to significant uncertainty due to complex field and hydraulic conditions, were re-rated as estimates. This study resulted in 5 of the 30 peak discharges having revised values greater than about 10 percent different from the original published values. Peak discharges were smaller for three floods (North Fork Hubbard Creek, Texas; El Rancho Arroyo, New Mexico; South Fork Wailua River, Hawaii), and two peak discharges were revised upward (Lahontan Reservoir tributary, Nevada; Bronco Creek, Arizona). Two peak discharges were indeterminate because they were concluded to have been debris flows with peak

  1. Kajakate suurkokkutulek Tallinnas / Emu Saarniit

    Index Scriptorium Estoniae

    Saarniit, Elmar Lembit, 1922-

    2009-01-01

    Rocca al Mare vabaõhumuuseumis 6. juulil 2009 toimunud Eesti skautlike noorteorganisatsioonide juhtide kokkutulekust. President Toomas Hendrik Ilves saatis osavõtjatele kirjalikult sooja skautliku tervituse

  2. 二甲双胍联合 TC 方案治疗晚期卵巢癌的临床观察%Clinical Observations on Metformin United TC Scheme in Advanced Ovarian Cancer

    Institute of Scientific and Technical Information of China (English)

    慈晓华; 庄静; 冯福斌; 孙月; 马家栋; 孙长岗

    2015-01-01

    目的:分析比较二甲双胍联合TC方案和单纯TC方案在伴有糖尿病的中老年晚期卵巢癌患者术后辅助化疗中的临床疗效。方法60例伴有糖尿病的中老年晚期卵巢癌患者,均用胰岛素控制血糖良好,随机分为治疗组和对照组,每组30例,治疗组采用二甲双胍联合TC方案治疗,对照组采用TC方案治疗。两组患者治疗均以21 d为1个周期。至少完成2周期化疗的患者进行疗效、毒副反应评价。结果治疗组的临床疗效优于对照组,治疗组有效28例(93.3%);对照组有效19例(63.3%)。两组比较,差异具有统计学意义( P<0.05)。两组的副反应相比,差异无统计学意义( P>0.05)。结论采用二甲双胍联合TC方案治疗伴糖尿病的中老年人晚期卵巢癌的临床疗效确切,不良反应并未明显增加,值得在临床推广应用。%[ ABSTRACT ] Objective To compare the clinical effect in assistant chemotherapy of metformin united TC scheme and alone TC scheme in elderly patients suffering from advanced ovarian cancer and diabetes.Methods Sixty elderly patients suffering from advanced ovarian cancer and diabetes,all with insulin to control blood sugar well,random-ly were divided into treatment group and control group.The treatment group were treated with metformin united TC scheme,the control group with TC scheme only.Twenty-one days as a treatment cycle.the efficacy and side effects in pa-tients at least two cycles of chemotherapy were evaluated.Results The clinical efficacy of the treatment group is better than the control group.There are twenty-eight cases of effective in the treatment group and the effective rate is 93.3%. There are nineteen cases of effective in the control group and the effective rate is 63 .3%,the effective rate were statisti-cally significant(P0.05).Conclusion The clinical effi-cacy of treatment with metformin united TC program in elderly patients suffering

  3. Development of a power electronics unit for the Space Station plasma contactor

    Science.gov (United States)

    Hamley, John A.; Hill, Gerald M.; Patterson, Michael J.; Saggio, Joseph, Jr.; Terdan, Fred; Mansell, Justin D.

    1994-02-01

    A hollow cathode plasma contactor has been baselined as a charge control device for the Space Station (SS) to prevent deleterious interactions of coated structural components with the ambient plasma. NASA LeRC Work Package 4 initiated the development of a plasma contactor system comprised of a Power Electronics Unit (PEU), an Expellant Management Unit (EMU), a command and data interface, and a Plasma Contactor Unit (PCU). A breadboard PEU was designed and fabricated. The breadboard PEU contains a cathode heater and discharge power supply, which were required to operate the PCU, a control and auxiliary power converter, an EMU interface, a command and telemetry interface, and a controller. The cathode heater and discharge supplies utilized a push-pull topology with a switching frequency of 20 kHz and pulse-width-modulated (PWM) control. A pulse ignition circuit derived from that used in arcjet power processors was incorporated in the discharge supply for discharge ignition. An 8088 based microcontroller was utilized in the breadboard model to provide a flexible platform for controller development with a simple command/data interface incorporating a direct connection to SS Mulitplexer/Demultiplexer (MDM) analog and digital I/O cards. Incorporating this in the flight model would eliminate the hardware and software overhead associated with a 1553 serial interface. The PEU autonomously operated the plasma contactor based on command inputs and was successfully integrated with a prototype plasma contactor unit demonstrating reliable ignition of the discharge and steady-state operation.

  4. Development of a Power Electronics Unit for the Space Station Plasma Contactor

    Science.gov (United States)

    Hamley, John A.; Hill, Gerald M.; Patterson, Michael J.; Saggio, Joseph, Jr.; Terdan, Fred; Mansell, Justin D.

    1994-01-01

    A hollow cathode plasma contactor has been baselined as a charge control device for the Space Station (SS) to prevent deleterious interactions of coated structural components with the ambient plasma. NASA LeRC Work Package 4 initiated the development of a plasma contactor system comprised of a Power Electronics Unit (PEU), an Expellant Management Unit (EMU), a command and data interface, and a Plasma Contactor Unit (PCU). A breadboard PEU was designed and fabricated. The breadboard PEU contains a cathode heater and discharge power supply, which were required to operate the PCU, a control and auxiliary power converter, an EMU interface, a command and telemetry interface, and a controller. The cathode heater and discharge supplies utilized a push-pull topology with a switching frequency of 20 kHz and pulse-width-modulated (PWM) control. A pulse ignition circuit derived from that used in arcjet power processors was incorporated in the discharge supply for discharge ignition. An 8088 based microcontroller was utilized in the breadboard model to provide a flexible platform for controller development with a simple command/data interface incorporating a direct connection to SS Mulitplexer/Demultiplexer (MDM) analog and digital I/O cards. Incorporating this in the flight model would eliminate the hardware and software overhead associated with a 1553 serial interface. The PEU autonomously operated the plasma contactor based on command inputs and was successfully integrated with a prototype plasma contactor unit demonstrating reliable ignition of the discharge and steady-state operation.

  5. Approach to criticality in cold core of the Unit 1 of the cycle 10 of the Laguna Verde power plant with control rods similar in design to the original ones and the advanced ones; Aproximacion a criticidad en frio de la Unidad 1 del ciclo 10 de la CLV con barras de control de diseno similar al original y avanzadas

    Energy Technology Data Exchange (ETDEWEB)

    Perusquia, R.; Ramirez, J.R.; Ortiz, J.J.; Hernandez, J.L.; Montes, J.L. [ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)]. E-mail: rpc@nuclear.inin.mx

    2004-07-01

    In the Laguna Verde power plant (CLV) worn out control bars have been replacing for control rods of advanced design. At the moment of the 109 rods of similar design to the original of the Unit 1 of the CLV, 14 of them have been substituted with two types of different advanced control rods. The same as the original rods the advanced rods use boron carbide as control element for neutrons, but additionally they use hafnium, to achieve a longer useful half life. The rods of similar design to the original are homogeneous axially on the other hand the advanced presenting several zones. In principle the advanced rods were designed to be neutronically compatible to the original rods. However the differences in the design and of constituents assumed to consider a different performance during the operation. Since the one numbers of advanced bars is growing with the number of cycles of the CLV reactor has requested to the National Institute of Nuclear Research (ININ) to evaluate in detailed form the performance of the control rods. Previously the calculations and analysis of cycle design that that were carried out assumed that control rods should be of similar design as the original. Using the HELIOS/CM-LENDS system, the effect of the inclusion of advanced rods was analyzed in the approximation of the criticality in cold (20 C) in the cycle 10 of the Unit 1. Four scenarios were poposed, where the type of the rod of substitution control is varied. The value of reactivity was calculated for the rods similar in design to the original and for the advanced one. By comparison of these values, it was found that the value of reactivity of the control rods of the advanced design was superior to the value for rods similar to the original ones by 7.6% for one of the advanced designs and of 13.6% for the other one. (Author)

  6. 动车组列车蟑螂种群分布及生态习性的研究%Investigation of EMU cockroach population distribution and ecological habits

    Institute of Scientific and Technical Information of China (English)

    迟丹; 迟淞元; 薛文根; 刘晓闪

    2012-01-01

    Objective To find out the population distribution and habits of EMU train cockroaches,and provide scientific basis for preventing and controlling the EMU train cockroaches. Methods House sticky cockroach recapture method, tracking and observing the activities of the cockroaches. Results The cockroaches on the EMU main mostly were German cockroach. Cockroaches density index; after the waste box > after water machine > distribution room > under bar counter > spare parts storage > bathroom > storage room; treatment medicine under 90 cm, the percentage of eating by stealth was 81. 11%. Conclusion EMU cockroaches mainly distributed after the waste box, the water machine,the power distribution room and so on, the main habitat venues of cockroaches where height is less than 90 cm. The activity patterns are basically the same with the cockroaches in other places. Boarding way of the cockroaches are mainly the following four kinds; the sale of food on the dining car cargo, passengers line package, train preparedness personnel, crew members%目的 摸清动车组列车蟑螂种群分布及生态习性,为动车组列车蟑螂防治提供科学依据.方法 蟑螂屋粘捕法,跟踪观察蟑螂活动情况.结果 动车组列车蟑螂种类主要为德国小蠊,蟑螂密度指数:废物箱后>饮水机后>配电室>吧台下>备品间>卫生间>储藏间;施药90 cm以下高度盗食率为81.11%.结论 动车组列车蟑螂主要分布于废物箱后、饮水机后、配电室等部位,90 cm以下高度是蟑螂主要栖息及活动场所;其活动规律与其他场所蟑螂基本相同.蟑螂主要是餐车出售食品上货时带入,旅客行包带入,列车整备人员带入,乘务人员带人4种途径.

  7. Geostatistics and remote sensing as predictive tools of tick distribution: a cokriging system to estimate Ixodes scapularis (Acari: Ixodidae) habitat suitability in the United States and Canada from advanced very high resolution radiometer satellite imagery.

    Science.gov (United States)

    Estrada-Peña, A

    1998-11-01

    Geostatistics (cokriging) was used to model the cross-correlated information between satellite-derived vegetation and climate variables and the distribution of the tick Ixodes scapularis (Say) in the Nearctic. Output was used to map the habitat suitability for I. scapularis on a continental scale. A data base of the localities where I. scapularis was collected in the United States and Canada was developed from a total of 346 published and geocoded records. This data base was cross-correlated with satellite pictures from the advanced very high resolution radiometer sensor obtained from 1984 to 1994 on the Nearctic at 10-d intervals, with a resolution of 8 km per pixel. Eight climate and vegetation variables were tabulated from this imagery. A cokriging system was generated to exploit satellite-derived data and to estimate the distribution of I. scapularis. Results obtained using 2 vegetation (standard NDVI) and 4 temperature variables closely agreed with actual records of the tick, with a sensitivity of 0.97 and a specificity of 0.89, with 6 and 4% of false-positive and false-negative sites, respectively. Such statistical analysis can be used to guide field work toward the correct interpretation of the distribution limits of I. scapularis and can also be used to make predictions about the impact of global change on tick range.

  8. Integrated Advanced Microwave Sounding Unit-A (AMSU-A). Test Report, Electromagnetic Interference (EMI)/Electromagnetic Radiation(EMR) and Electromagnetic Capability (EMC) for the EOS/AMSU-A1

    Science.gov (United States)

    Paliwoda, L.

    1998-01-01

    This document contains the procedure and the test results of the Advanced Microwave Sounding Unit-A (AMSU-A) Earth Observing System (EOS) Project, assembly part number 1356008-1, serial number 202, Electromagnetic Interference (EMI) and Electromagnetic Susceptibility (EMC) qualification test. The test was conducted in accordance with the approved EMI/EMC Test Plan/Procedure, Specification number AE-26151/8B, dated 10 September 1998. Aerojet intends that the presentation and submittal of this document, prepared in accordance with the objectives established by the aforementioned Test Plan/Procedure, document number AE-26151/8B, will satisfy the data requirement with respect to the AMSU-A/EOS instrument operational compliance of the EMI/EMC test requirement. Test for the AMSU-A/EOS instrument have been completed and all the requirements per General Interface Requirement Document (GIRD), GSFC 422-11-12-01, for EOS Common Spacecraft/Instruments, paragraph 10.11, were met with the exceptions of the test methods CE03, RE01, and RE02, as described in this document.

  9. Measurement of jet activity in top quark events using the $e\\mu$ final state with two $b$-tagged jets in $pp$ collisions at $\\sqrt{s}=8$ TeV with the ATLAS detector

    CERN Document Server

    Aaboud, Morad; Abbott, Brad; Abdallah, Jalal; Abdinov, Ovsat; Abeloos, Baptiste; Aben, Rosemarie; AbouZeid, Ossama; Abraham, Nicola; Abramowicz, Halina; Abreu, Henso; Abreu, Ricardo; Abulaiti, Yiming; Acharya, Bobby Samir; Adamczyk, Leszek; Adams, David; Adelman, Jahred; Adomeit, Stefanie; Adye, Tim; Affolder, Tony; Agatonovic-Jovin, Tatjana; Agricola, Johannes; Aguilar-Saavedra, Juan Antonio; Ahlen, Steven; Ahmadov, Faig; Aielli, Giulio; Akerstedt, Henrik; Åkesson, Torsten Paul Ake; Akimov, Andrei; Alberghi, Gian Luigi; Albert, Justin; Albrand, Solveig; Alconada Verzini, Maria Josefina; Aleksa, Martin; Aleksandrov, Igor; Alexa, Calin; Alexander, Gideon; Alexopoulos, Theodoros; Alhroob, Muhammad; Ali, Babar; Aliev, Malik; Alimonti, Gianluca; Alison, John; Alkire, Steven Patrick; Allbrooke, Benedict; Allen, Benjamin William; Allport, Phillip; Aloisio, Alberto; Alonso, Alejandro; Alonso, Francisco; Alpigiani, Cristiano; Alstaty, Mahmoud; Alvarez Gonzalez, Barbara; Άlvarez Piqueras, Damián; Alviggi, Mariagrazia; Amadio, Brian Thomas; Amako, Katsuya; Amaral Coutinho, Yara; Amelung, Christoph; Amidei, Dante; Amor Dos Santos, Susana Patricia; Amorim, Antonio; Amoroso, Simone; Amundsen, Glenn; Anastopoulos, Christos; Ancu, Lucian Stefan; Andari, Nansi; Andeen, Timothy; Anders, Christoph Falk; Anders, Gabriel; Anders, John Kenneth; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Angelidakis, Stylianos; Angelozzi, Ivan; Anger, Philipp; Angerami, Aaron; Anghinolfi, Francis; Anisenkov, Alexey; Anjos, Nuno; Annovi, Alberto; Antel, Claire; Antonelli, Mario; Antonov, Alexey; Anulli, Fabio; Aoki, Masato; Aperio Bella, Ludovica; Arabidze, Giorgi; Arai, Yasuo; Araque, Juan Pedro; Arce, Ayana; Arduh, Francisco Anuar; Arguin, Jean-Francois; Argyropoulos, Spyridon; Arik, Metin; Armbruster, Aaron James; Armitage, Lewis James; Arnaez, Olivier; Arnold, Hannah; Arratia, Miguel; Arslan, Ozan; Artamonov, Andrei; Artoni, Giacomo; Artz, Sebastian; Asai, Shoji; Asbah, Nedaa; Ashkenazi, Adi; Åsman, Barbro; Asquith, Lily; Assamagan, Ketevi; Astalos, Robert; Atkinson, Markus; Atlay, Naim Bora; Augsten, Kamil; Avolio, Giuseppe; Axen, Bradley; Ayoub, Mohamad Kassem; Azuelos, Georges; Baak, Max; Baas, Alessandra; Baca, Matthew John; Bachacou, Henri; Bachas, Konstantinos; Backes, Moritz; Backhaus, Malte; Bagiacchi, Paolo; Bagnaia, Paolo; Bai, Yu; Baines, John; Baker, Oliver Keith; Baldin, Evgenii; Balek, Petr; Balestri, Thomas; Balli, Fabrice; Balunas, William Keaton; Banas, Elzbieta; Banerjee, Swagato; Bannoura, Arwa A E; Barak, Liron; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Barillari, Teresa; Barisits, Martin-Stefan; Barklow, Timothy; Barlow, Nick; Barnes, Sarah Louise; Barnett, Bruce; Barnett, Michael; Barnovska, Zuzana; Baroncelli, Antonio; Barone, Gaetano; Barr, Alan; Barranco Navarro, Laura; Barreiro, Fernando; Barreiro Guimarães da Costa, João; Bartoldus, Rainer; Barton, Adam Edward; Bartos, Pavol; Basalaev, Artem; Bassalat, Ahmed; Bates, Richard; Batista, Santiago Juan; Batley, Richard; Battaglia, Marco; Bauce, Matteo; Bauer, Florian; Bawa, Harinder Singh; Beacham, James; Beattie, Michael David; Beau, Tristan; Beauchemin, Pierre-Hugues; Bechtle, Philip; Beck, Hans~Peter; Becker, Kathrin; Becker, Maurice; Beckingham, Matthew; Becot, Cyril; Beddall, Andrew; Beddall, Ayda; Bednyakov, Vadim; Bedognetti, Matteo; Bee, Christopher; Beemster, Lars; Beermann, Thomas; Begel, Michael; Behr, Janna Katharina; Belanger-Champagne, Camille; Bell, Andrew Stuart; Bella, Gideon; Bellagamba, Lorenzo; Bellerive, Alain; Bellomo, Massimiliano; Belotskiy, Konstantin; Beltramello, Olga; Belyaev, Nikita; Benary, Odette; Benchekroun, Driss; Bender, Michael; Bendtz, Katarina; Benekos, Nektarios; Benhammou, Yan; Benhar Noccioli, Eleonora; Benitez, Jose; Benjamin, Douglas; Bensinger, James; Bentvelsen, Stan; Beresford, Lydia; Beretta, Matteo; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Beringer, Jürg; Berlendis, Simon; Bernard, Nathan Rogers; Bernius, Catrin; Bernlochner, Florian Urs; Berry, Tracey; Berta, Peter; Bertella, Claudia; Bertoli, Gabriele; Bertolucci, Federico; Bertram, Iain Alexander; Bertsche, Carolyn; Bertsche, David; Besjes, Geert-Jan; Bessidskaia Bylund, Olga; Bessner, Martin Florian; Besson, Nathalie; Betancourt, Christopher; Bethke, Siegfried; Bevan, Adrian John; Bianchi, Riccardo-Maria; Bianchini, Louis; Bianco, Michele; Biebel, Otmar; Biedermann, Dustin; Bielski, Rafal; Biesuz, Nicolo Vladi; Biglietti, Michela; Bilbao De Mendizabal, Javier; Billoud, Thomas Remy Victor

    2016-01-01

    Measurements of the jet activity in $t\\bar{t}$ events produced in proton--proton collisions at $\\sqrt{s}=8$ TeV are presented, using 20.3\\,fb$^{-1}$ of data collected by the ATLAS experiment at the Large Hadron Collider. The events were selected in the dilepton $e\\mu$ decay channel with two identified $b$-jets. The numbers of additional jets for various jet transverse momentum ($p_T$) thresholds, and the normalised differential cross-sections as a function of $p_T$ for the five highest-$p_T$ additional jets, were measured in the jet pseudorapidity range $|\\eta|<4.5$. The gap fraction, the fraction of events which do not contain an additional jet in a central rapidity region, was measured for several rapidity intervals as a function of the minimum $p_T$ of a single jet or the scalar sum of $p_T$ of all additional jets. These fractions were also measured in different regions of the invariant mass of the $e\\mu b\\bar{b}$ system. All measurements were corrected for detector effects, and found to be mostly well-...

  10. Search for high-mass resonances and quantum black holes in the $e\\mu$ final state in proton-proton collisions at $\\sqrt{s}=13~\\mathrm{TeV}$

    CERN Document Server

    CMS Collaboration

    2016-01-01

    A search for heavy resonances decaying into $e\\mu$ final states has been performed using an integrated luminosity of $2.7~\\mathrm{fb}^{-1}$ of $13~\\mathrm{TeV}$ proton-proton collision data recorded with the CMS detector at the LHC. No evidence for physics beyond the Standard Model is observed in the invariant mass spectrum of selected $e\\mu$ pairs. Upper limits at $95\\%$ CL are set on the cross section times branching ratio of different signal benchmark models foreseeing lepton flavour violation in interactions involving charged leptons. Scenarios of resonant $\\tau$ sneutrino production in R-parity violating supersymmetry are excluded for masses below $1.0~\\mathrm{TeV}$ for couplings $\\lambda_{132}=\\lambda_{231}=\\lambda'_{311}=0.01$ and below $3.3~\\mathrm{TeV}$ for $\\lambda_{132}=\\lambda_{231}=\\lambda'_{311}=0.2$. The observed invariant mass spectrum is also interpreted in terms of the non-resonant signal of Quantum Black Hole (QBH) production in models with extra dimensions. The observed exclusion limits ra...

  11. Quantification and location of emergency service mobile units and the failures in electric power distribution networks: application of hypercube model; Quantificacao e locacao de unidades moveis de atendimento de emergencia a interrupcoes em redes de distribuicao de energia eletrica: aplicacao do modelo hipercubo

    Energy Technology Data Exchange (ETDEWEB)

    Albino, Jean Carlo de Campos

    1994-11-01

    The basic hypercube queuing model, as well its approximated version, are normally used to analyze public emergency systems`performance. Both models, however, can be used only when the system has no geographical limitation of its Emergency Mobile Units (EMU), i.e, in systems in which the region`s atoms can be attended by any EMU, meaning that each EMU can over the entirety of the analysed region. In systems that does not present this property, one could only use simulation techniques. This paper presents an adaptation of the basic hypercube model that was developed for cases of urban emergency systems in which the EMU`s are not allowed or not worthwhile to cover the entire region. This adapted version is called Limited Hypercube Model (LHM). Modifications have been made in several steps of the basic model, and has brought a new analysis perspective, by amplifying the hypercube`s application universe and allowing mathematical description of some limited systems` specific features. The LHM was applied to analyze an electric energy distribution public service at Florianopolis, and the results are discussed in the paper. (author) 12 refs., 11 figs., 14 tabs.

  12. Outdoorsman, Unit III.

    Science.gov (United States)

    Alberta Dept. of Agriculture, Edmonton.

    The third and final unit of the 4-H Outdoorsman Program covers the most advanced and challenging campcraft skills for 4-H members in British Columbia, Alberta, Saskatchewan and Manitoba. Survival camping (including building shelters and finding food), in-depth map-reading and orienteering, game management, hiking themes and recordkeeping are all…

  13. Advance care directives

    Science.gov (United States)

    ... advance directive; Do-not-resuscitate - advance directive; Durable power of attorney - advance care directive; POA - advance care directive; Health care agent - advance care directive; Health care proxy - ...

  14. Advanced Triangulation Displacement Sensors

    Science.gov (United States)

    Poteet, Wade M.; Cauthen, Harold K.

    1996-01-01

    Advanced optoelectronic triangulation displacement sensors undergoing development. Highly miniaturized, more stable, more accurate, and relatively easy to use. Incorporate wideband electronic circuits suitable for real-time monitoring and control of displacements. Measurements expected to be accurate to within nanometers. In principle, sensors mass-produced at relatively low unit cost. Potential applications numerous. Possible industrial application in measuring runout of rotating shaft or other moving part during fabrication in "zero-defect" manufacturing system, in which measured runout automatically corrected.

  15. Advanced Triangulation Displacement Sensors

    Science.gov (United States)

    Poteet, Wade M.; Cauthen, Harold K.

    1996-01-01

    Advanced optoelectronic triangulation displacement sensors undergoing development. Highly miniaturized, more stable, more accurate, and relatively easy to use. Incorporate wideband electronic circuits suitable for real-time monitoring and control of displacements. Measurements expected to be accurate to within nanometers. In principle, sensors mass-produced at relatively low unit cost. Potential applications numerous. Possible industrial application in measuring runout of rotating shaft or other moving part during fabrication in "zero-defect" manufacturing system, in which measured runout automatically corrected.

  16. Advanced Hydride Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Motyka, T.

    1989-01-01

    Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, cold,'' process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility's metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

  17. Advanced Hydride Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Motyka, T.

    1989-12-31

    Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, ``cold,`` process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility`s metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

  18. CRH1与CRH2动车组牵引变流器性能比较与优化%Research on performance comparison and optimization of traction converter for CRH1 & CRH2 EMU

    Institute of Scientific and Technical Information of China (English)

    朱琴跃; 王俊哲; 刘爱雷

    2013-01-01

    The performance of EMU traction converter is one of the most important factors for evaluating EMU’s operation safety and efficiency. This paper takes CRH1A and CRH2A EMU converters as research objects, and carries out research on two converters’performance analysis and optimization based on Matlab/Simulink software. This paper accords to actual design parameter of two converters’main circuits and builds up simulation models separately, then makes a comparison and analysis of the effects on system’s in-out performance imposed by main circuits’structures and their control methods. Based on this, this paper researches into SVPWM control method’s effect on improving converter in-out characteristics and dynamic performance applied to CRH2A EMU converter. The conclusion is preliminarily verified by simulation modeling. The results and data are basically consistent with expecting objectives.%动车组牵引变流器的性能是评估动车组安全高效运行的重要指标之一。以CRH1A和CRH2A型动车组牵引变流器为对象,基于Matlab/Simulink仿真软件对两种变流器的性能及其优化进行了研究。根据两种变流器主电路实际设计参数分别建立了各自的仿真模型,比较和分析了相应主电路结构及其对应的控制策略对系统输入输出性能的影响。在此基础上,探究了空间矢量脉宽调制SVPWM控制策略应用在CRH2A型动车组变流器中对改善变流器输入输出特性及动态性能的效果,通过仿真建模初步验证了该结论。仿真结果和数据基本符合预期目标。

  19. Advance payments

    CERN Multimedia

    Human Resources Division

    2003-01-01

    Administrative Circular N 8 makes provision for the granting of advance payments, repayable in several monthly instalments, by the Organization to the members of its personnel. Members of the personnel are reminded that these advances are only authorized in exceptional circumstances and at the discretion of the Director-General. In view of the current financial situation of the Organization, and in particular the loans it will have to incur, the Directorate has decided to restrict the granting of such advances to exceptional or unforeseen circumstances entailing heavy expenditure and more specifically those pertaining to social issues. Human Resources Division Tel. 73962

  20. ADVANCE PAYMENTS

    CERN Multimedia

    Human Resources Division

    2002-01-01

    Administrative Circular Nº 8 makes provision for the granting of advance payments, repayable in several monthly instalments, by the Organization to the members of its personnel. Members of the personnel are reminded that these advances are only authorized in exceptional circumstances and at the discretion of the Director-General. In view of the current financial situation of the Organization, and in particular the loans it will have to incur, the Directorate has decided to restrict the granting of such advances to exceptional or unforeseen circumstances entailing heavy expenditure and more specifically those pertaining to social issues. Human Resources Division Tel. 73962

  1. Advanced nanoelectronics

    CERN Document Server

    Ismail, Razali

    2012-01-01

    While theories based on classical physics have been very successful in helping experimentalists design microelectronic devices, new approaches based on quantum mechanics are required to accurately model nanoscale transistors and to predict their characteristics even before they are fabricated. Advanced Nanoelectronics provides research information on advanced nanoelectronics concepts, with a focus on modeling and simulation. Featuring contributions by researchers actively engaged in nanoelectronics research, it develops and applies analytical formulations to investigate nanoscale devices. The

  2. 基于动车组 TBDR数据特征的列车制动规律分析%Braking characteristics analysis of EMU based on TBDR data

    Institute of Scientific and Technical Information of China (English)

    张立国; 左建勇; 梁爽; 王宗明

    2013-01-01

    The EMU's braking energy and braking level distribution have been analyzed based on da-ta of the traction and braking data recorder ( TBDR).It is helpful to further grasp the operation law of EMU, provide technical support for EMU's service and failure analysis.Based on the modular design and programming ideas , using LabVIEW object -oriented software platform , we have developed the visual a-nalysis software oriented to EMU running information .This software can realize the train running status information query and the braking energy distribution statistics within any operation time , the total times of the train stops and the statistical functions of its brake level .The case study shows that the electric bra-king energy∶the resistance power consumption∶friction braking energy is about 7∶2∶1; braking level in low speed region especially 100 km/h the following changes frequently , and emergency brake is rarely used .And study on recovery of electric braking is great significance .%  根据动车组运行过程中牵引制动数据记录仪( TBDR )数据特征分析列车制动能量及制动级位分布规律,有助于进一步掌握动车组运行规律,为快速分析动车组故障信息与服役性能提供技术支撑。基于模块化设计与编程思想,采用LabVIEW面向对象软件平台,开发的面向动车组运行信息的可视分析终端,实现了运行时段内任意时刻的列车运行状态信息查询,任意时段内的制动能量分布统计,列车停车次数以及制动级位的统计等功能。案例分析表明动车组运行过程中制动能量分布遵循电制动能量∶阻力消耗功∶摩擦制动能量约为7∶2∶1的规律;制动级位在低速区段尤其是100 km/h以下变化频繁,EB等紧急制动很少使用,研究电制动的回收利用意义较大。

  3. Measurement of jets produced in top quark events using the $e\\mu$ final state with 2 b-tagged jets in pp collisions at $\\sqrt{s }= $ 8 TeV with the ATLAS detector

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00354197

    The transverse momentum (pT) and multiplicity of jets produced in top quark events are measured using 20.3 inverse femtobarns of pp collision data at a center-of-mass energy of 8 TeV. Jets are selected from top events requiring an opposite-charge $e\\mu$ pair and two b-tagged jets in the final state. The data are corrected to obtain the particle-level fiducial cross section for additional jets with rank 1-4, where rank=1 is the leading additional jet. These distributions are used to obtain the extra jet multiplicity as a function of minimum jet pT threshold. The results are compared with several next to leading order Monte Carlo generators. The resulting measurements can be used to tune Monte Carlo QCD modelling and may also reduce associated modelling uncertainties for LHC top quark physics measurements.

  4. AdvancED Flex 4

    CERN Document Server

    Tiwari, Shashank; Schulze, Charlie

    2010-01-01

    AdvancED Flex 4 makes advanced Flex 4 concepts and techniques easy. Ajax, RIA, Web 2.0, mashups, mobile applications, the most sophisticated web tools, and the coolest interactive web applications are all covered with practical, visually oriented recipes. * Completely updated for the new tools in Flex 4* Demonstrates how to use Flex 4 to create robust and scalable enterprise-grade Rich Internet Applications.* Teaches you to build high-performance web applications with interactivity that really engages your users.* What you'll learn Practiced beginners and intermediate users of Flex, especially

  5. Advanced Algal Systems Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-01

    Research and development (R&D) on advanced algal biofuels and bioproducts presents an opportunity to sustainably expand biomass resource potential in the United States. The Bioenergy Technologies Office’s (BETO’s) Advanced Algal Systems Program is carrying out a long-term, applied R&D strategy to lower the costs of algal biofuel production by working with partners to develop revolutionary technologies and conduct crosscutting analyses to better understand the potential

  6. Quality and safety in adult epilepsy monitoring units: A systematic review and meta-analysis.

    Science.gov (United States)

    Sauro, Khara M; Wiebe, Natalie; Macrodimitris, Sophie; Wiebe, Samuel; Lukmanji, Sara; Jetté, Nathalie

    2016-11-01

    The epilepsy monitoring unit (EMU) is a valuable resource for optimizing management of persons with epilepsy, but may place patients at risk for adverse events due to withdrawal of treatment and induction of symptoms. The purpose of this study was to synthesize data on the safety and quality of care in EMUs to inform the development of quality indicators for EMUs. A systematic review was conducted according to the Preferred Reporting and Items for Systematic Review and Meta-Analysis (PRISMA) statement. The search strategy, which included broad search terms and synonyms pertaining to the EMU, was run in six medical databases and included conference proceedings. Data abstracted included patient and EMU demographics and quality and safety variables. Study quality was evaluated using a modified 15-item Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) checklist. Descriptive statistics and meta-analyses were used to describe and synthesize the evidence. The search yielded 7,601 references, of which 604 were reviewed in full text. One-hundred thirty-five studies were included. The quality and safety data came from 181,823 patients and reported on 34 different quality and safety variables. Included studies commonly reported the number of patients (108 studies; median number patients, 171.5), age (49 studies; mean age 35.7 years old), and the reason for admission (34 studies). The most common quality and safety data reported were the utility of the EMU admission (38 studies). Thirty-three studies (24.4%) reported on adverse events, and yielded a pooled proportion of adverse events of 7% (95% confidence interval [CI] 5-9%). The mean quality score was 73.3% (standard deviation [SD] 17.2). This study demonstrates that there is a great deal of variation in the reporting of quality and safety measures and in the quality and safety in EMUs. Study quality also varied considerably from one study to the next. These findings highlight the need to develop

  7. Advanced calculus

    CERN Document Server

    Nickerson, HK; Steenrod, NE

    2011-01-01

    ""This book is a radical departure from all previous concepts of advanced calculus,"" declared the Bulletin of the American Mathematics Society, ""and the nature of this departure merits serious study of the book by everyone interested in undergraduate education in mathematics."" Classroom-tested in a Princeton University honors course, it offers students a unified introduction to advanced calculus. Starting with an abstract treatment of vector spaces and linear transforms, the authors introduce a single basic derivative in an invariant form. All other derivatives - gradient, divergent, curl,

  8. Advanced Search

    African Journals Online (AJOL)

    Items 451 - 500 of 500 ... East and Central African Journal of Surgery · Vol 17, No 3 (2012) ... Post-surgical treatment of thyroid carcinoma in dogs with retinoic ... arising in a mature cystic ovarian Teratoma with bladder invasion: A Case Report, Abstract PDF ... of Bicalutamide in Patients with Advanced Prostate Cancer, Abstract.

  9. Advanced ferroelectricity

    CERN Document Server

    Blinc, R

    2011-01-01

    Advances in the field of ferroelectricity have implications both for basic physics and for technological applications such as memory devices, spintronic applications and electro-optic devices, as well as in acoustics, robotics, telecommunications and medicine. This book provides an account of recent developments in the field.

  10. Advanced Search

    African Journals Online (AJOL)

    Items 251 - 300 of 557 ... ... Journal of Africa, Animal Production Research Advances, Animal ..... Frederick Haraka, Ali Mohamed, Gadi Kilonzo, Humphrey Shao ... No 3 (2010), Culture and Belief Systems: A Christian Experience in the 21st Century, Abstract .... on cardiovascular parameters and CD4 cell count of people living ...

  11. CADC Advanced Search

    Science.gov (United States)

    Jenkins, D. N.

    2012-09-01

    The Canadian Astronomy Data Centre's (CADC) Advanced Search web application is a modern search tool to access data across the CADC archives. It allows searching in different units, and is well averse in wild card characters and numeric operations. Search results are displayed in a sortable and filterable manner allowing quick and accurate access to downloadable data. The Advanced Search interface makes extremely good use of the Astronomical Data Query Language (ADQL) to scour the Common Archive Observation Model (CAOM) Table Access Protocol (TAP) query service and the vast CADC Archive Data (AD) storage system. A new tabular view of the query form and the results data makes it easy to view the query, then return to the query form to make further changes, or, alternatively, filter the data from the paginated table. Results are displayed using a rich, open-source, JavaScript-based VOTable viewer called voview.

  12. Advanced Agriculture system

    Directory of Open Access Journals (Sweden)

    Shrinivas R. Zanwar

    2012-05-01

    Full Text Available This article addresses the advanced system which improves agriculture processes like cultivation on ploughed land, based on robotic platform. We have developed a robotic vehicle having four wheels and steered by DC motor. The advanced autonomous system architecture gives us the opportunity to develop a complete new range of agricultural equipment based on small smart machines. The machine will cultivate the farm by considering particular rows and specific column at fixed distance depending on crop. The obstacle detection problem will also be considered, sensed by infrared sensor. The whole algorithm, calculation, processing, monitoring are designed with motors & sensor interfaced with microcontroller. The result obtained through example activation unit is also presented. The dc motor simulation with feedforward and feedback technique shows precise output. With the help of two examples, a DC motor and a magnetic levitation system, the use of MATLAB and Simulink for modeling, analysis and control is designed.

  13. Improved computational performance of MFA using elementary metabolite units and flux coupling.

    Science.gov (United States)

    Suthers, Patrick F; Chang, Young J; Maranas, Costas D

    2010-03-01

    Extending the scope of isotope mapping models becomes increasingly important in order to analyze strains and drive improved product yields as more complex pathways are engineered into strains and as secondary metabolites are used as starting points for new products. Here we present how the elementary metabolite unit (EMU) framework and flux coupling significantly decrease the computational burden of metabolic flux analysis (MFA) when applied to large-scale metabolic models. We applied these techniques to a previously published isotope mapping model of Escherichia coli accounting for 238 reactions. We find that the combined use of EMU and flux coupling analysis leads to a ten-fold decrease in the number of variables in comparison to the original isotope distribution vector (IDV) version of the model. In addition, using OptMeas the task of identifying additional measurement choices to fully specify the flows in the metabolic network required only 2% of the computation time of the one using IDVs. The observed computational savings reveal the rapid progress in performing MFA with increasingly larger isotope models with the ultimate goal of handling genome-scale models of metabolism. (c) 2009 Elsevier Inc. All rights reserved.

  14. Advances in luminescence instrument systems

    DEFF Research Database (Denmark)

    Bøtter-Jensen, L.; Bulur, E.; Duller, G.A.T.

    2000-01-01

    We report on recent advances in the development of luminescence measurement systems and techniques at Riso. These include: (1) optical stimulation units based on new-generation powerful blue light (470 nm) emitting diodes providing up to 28 mW/cm(2) for OSL measurements; (2) an infrared (830 nm...

  15. Advanced Virgo

    CERN Multimedia

    Virgo, a first-generation interferometric gravitational wave (GW) detector, located in the European Gravitational Observatory, EGO, Cascina (Pisa-Italy) and constructed by the collaboration of French and Italian institutes (CNRS and INFN) has successfully completed its long-duration data taking runs. It is now undergoing a fundamental upgrade that exploits available cutting edges technology to open an exciting new window on the universe, with the first detection of a gravitational wave signal. Advanced Virgo (AdV) is the project to upgrade the Virgo detector to a second-generation instrument. AdV will be able to scan a volume of the Universe 1000 times larger than initial Virgo. AdV will be hosted in the same infrastructures as Virgo. The Advanced VIRGO project is funded and at present carried on by a larger collaboration of institutes belonging to CNRS- France , RMKI - Hungary, INFN- Italy, Nikhef - The Netherlands Polish Academy of Science - Poland.

  16. Advancing Leadership

    Directory of Open Access Journals (Sweden)

    Penny L. Tenuto

    2014-04-01

    Full Text Available Preparing students to become active citizens and contributors to a democratic society is premised on teaching democratic principles and modeling standards of democratic practice at all levels of education. The purpose of this integrative literature review is to establish a conceptual framework grounded in literature and a model for cultivating democratic professional practice in education (DPPE to advance leadership for school improvement. This work is presented in three parts: (a a review of historical references, reports, and legislation that culminated in increased accountability and standards in P-12 public education; (b a discussion of social patterns in education generally associated with bureaucracy versus democracy; and (c a new contribution to the literature, a model for cultivating DPPE is conceptualized to encourage leading and teaching professionals to reflect on beliefs and evaluate practices in advancing leadership for school improvement. Recommendations are included for further research.

  17. Advanced LIGO

    OpenAIRE

    Aasi, J.; Abbott, B.; Abbott, R.; Abbott, T.; Abernathy, M; Ackley, K.; Adams, C.; Adams, T.; Addesso, P; Adhikari, R.; Adya, V.; Affeldt, C.; Aggarwal, N.; Aguiar, O.; Ain, A.

    2014-01-01

    The Advanced LIGO gravitational wave detectors are second-generation instruments designed and built for the two LIGO observatories in Hanford, WA and Livingston, LA, USA. The two instruments are identical in design, and are specialized versions of a Michelson interferometer with 4 km long arms. As in Initial LIGO, Fabry–Perot cavities are used in the arms to increase the interaction time with a gravitational wave, and power recycling is used to increase the effective laser power. Signal recyc...

  18. Advanced Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, Gordon R. [NETL

    2013-03-11

    The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

  19. Generating Units

    Data.gov (United States)

    Department of Homeland Security — Generating Units are any combination of physically connected generators, reactors, boilers, combustion turbines, and other prime movers operated together to produce...

  20. UNIT, TIBET.

    Science.gov (United States)

    Louisiana Arts and Science Center, Baton Rouge.

    THE UNIT OF STUDY DESCRIBED IN THIS BOOKLET DEALS WITH THE GEOGRAPHY AND HISTORY OF TIBET. THE UNIT COVERS SOME OF THE GENERAL FEATURES OF THE COUNTRY AND THEIR EFFECT UPON THE LIVES OF THE TIBETAN PEOPLE. DISCUSSION QUESTIONS ARE INSERTED TO STIMULATE THOUGHT. THE RELIGION OF TIBET IS DISCUSSED IN RELATION TO ITS INFLUENCE ON THE ART AND CULTURE…

  1. Flotation advances

    Energy Technology Data Exchange (ETDEWEB)

    Clifford, D.

    1998-11-01

    This paper describes recent advances in flotation cell and mechanism design. OutoKumpu have designed larger cells, suitable for the flotation of smaller particles, with differing mechanisms for particles of different types. Froth handling is also closely controlled. Flotation cells from BQR are also described. Flotation columns are also increasingly being adopted, complementing the use of conventional flotation cells. Designs by Wemco, Multotec, VERTI-MIX, Jameson, Suedala, Quinn and Cytec are detailed, giving improvements in fine coal separation coarse particle separation, and other innovations. 8 figs., 2 tabs.

  2. Advanced calculus

    CERN Document Server

    Widder, David V

    2012-01-01

    This classic text by a distinguished mathematician and former Professor of Mathematics at Harvard University, leads students familiar with elementary calculus into confronting and solving more theoretical problems of advanced calculus. In his preface to the first edition, Professor Widder also recommends various ways the book may be used as a text in both applied mathematics and engineering.Believing that clarity of exposition depends largely on precision of statement, the author has taken pains to state exactly what is to be proved in every case. Each section consists of definitions, theorem

  3. Advanced calculus

    CERN Document Server

    Friedman, Avner

    2007-01-01

    This rigorous two-part treatment advances from functions of one variable to those of several variables. Intended for students who have already completed a one-year course in elementary calculus, it defers the introduction of functions of several variables for as long as possible, and adds clarity and simplicity by avoiding a mixture of heuristic and rigorous arguments.The first part explores functions of one variable, including numbers and sequences, continuous functions, differentiable functions, integration, and sequences and series of functions. The second part examines functions of several

  4. Advanced trigonometry

    CERN Document Server

    Durell, C V

    2003-01-01

    This volume will provide a welcome resource for teachers seeking an undergraduate text on advanced trigonometry, when few are readily available. Ideal for self-study, this text offers a clear, logical presentation of topics and an extensive selection of problems with answers. Contents include the properties of the triangle and the quadrilateral; equations, sub-multiple angles, and inverse functions; hyperbolic, logarithmic, and exponential functions; and expansions in power-series. Further topics encompass the special hyperbolic functions; projection and finite series; complex numbers; de Moiv

  5. Advanced calculus

    CERN Document Server

    Fitzpatrick, Patrick M

    2009-01-01

    Advanced Calculus is intended as a text for courses that furnish the backbone of the student's undergraduate education in mathematical analysis. The goal is to rigorously present the fundamental concepts within the context of illuminating examples and stimulating exercises. This book is self-contained and starts with the creation of basic tools using the completeness axiom. The continuity, differentiability, integrability, and power series representation properties of functions of a single variable are established. The next few chapters describe the topological and metric properties of Euclide

  6. 关于大西高铁动车组防掉分相的研究%About Datong to Xi’an High-speed Emu Prevent Split Phase of Research

    Institute of Scientific and Technical Information of China (English)

    梁巍

    2014-01-01

    防止因司机操纵不当造成动车组列车掉入分相或带电过分相是确保高铁行车安全的重要环节之一。通过对大西高铁各型动车组分相通过能力和存在的风险进行研究,从司机操纵方面提出相关建议,为大西高铁动车组防掉分相提供参考意见。%Prevent improper for the driver to manipulate the emu train fall into the split phase or charged too much phase is one of the important link to ensure high-speed rail safety. Based on Datong to Xi’an high-speed each bullet points phase through the research of ability and the risks some Suggestions from the aspects of driver's operation, for high-speed rail trains, Datong to Xi’an high-speed prevent split phase to provide the reference.

  7. Measurement of the $t\\bar{t}$ production cross-section using $e\\mu$ events with $b$-tagged jets in $pp$ collisions at $\\sqrt{s}=7$ and 8 TeV with the ATLAS detector

    CERN Document Server

    Aad, Georges; Abdallah, Jalal; Abdel Khalek, Samah; Abdinov, Ovsat; Aben, Rosemarie; Abi, Babak; Abolins, Maris; AbouZeid, Ossama; Abramowicz, Halina; Abreu, Henso; Abreu, Ricardo; Abulaiti, Yiming; Acharya, Bobby Samir; Adamczyk, Leszek; Adams, David; Adelman, Jahred; Adomeit, Stefanie; Adye, Tim; Agatonovic-Jovin, Tatjana; Aguilar-Saavedra, Juan Antonio; Agustoni, Marco; Ahlen, Steven; Ahmadov, Faig; Aielli, Giulio; Akerstedt, Henrik; Åkesson, Torsten Paul Ake; Akimoto, Ginga; Akimov, Andrei; Alberghi, Gian Luigi; Albert, Justin; Albrand, Solveig; Alconada Verzini, Maria Josefina; Aleksa, Martin; Aleksandrov, Igor; Alexa, Calin; Alexander, Gideon; Alexandre, Gauthier; Alexopoulos, Theodoros; Alhroob, Muhammad; Alimonti, Gianluca; Alio, Lion; Alison, John; Allbrooke, Benedict; Allison, Lee John; Allport, Phillip; Almond, John; Aloisio, Alberto; Alonso, Alejandro; Alonso, Francisco; Alpigiani, Cristiano; Altheimer, Andrew David; Alvarez Gonzalez, Barbara; Alviggi, Mariagrazia; Amako, Katsuya; Amaral Coutinho, Yara; Amelung, Christoph; Amidei, Dante; Amor Dos Santos, Susana Patricia; Amorim, Antonio; Amoroso, Simone; Amram, Nir; Amundsen, Glenn; Anastopoulos, Christos; Ancu, Lucian Stefan; Andari, Nansi; Andeen, Timothy; Anders, Christoph Falk; Anders, Gabriel; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Anduaga, Xabier; Angelidakis, Stylianos; Angelozzi, Ivan; Anger, Philipp; Angerami, Aaron; Anghinolfi, Francis; Anisenkov, Alexey; Anjos, Nuno; Annovi, Alberto; Antonaki, Ariadni; Antonelli, Mario; Antonov, Alexey; Antos, Jaroslav; Anulli, Fabio; Aoki, Masato; Aperio Bella, Ludovica; Apolle, Rudi; Arabidze, Giorgi; Aracena, Ignacio; Arai, Yasuo; Araque, Juan Pedro; Arce, Ayana; Arguin, Jean-Francois; Argyropoulos, Spyridon; Arik, Metin; Armbruster, Aaron James; Arnaez, Olivier; Arnal, Vanessa; Arnold, Hannah; Arratia, Miguel; Arslan, Ozan; Artamonov, Andrei; Artoni, Giacomo; Asai, Shoji; Asbah, Nedaa; Ashkenazi, Adi; Åsman, Barbro; Asquith, Lily; Assamagan, Ketevi; Astalos, Robert; Atkinson, Markus; Atlay, Naim Bora; Auerbach, Benjamin; Augsten, Kamil; Aurousseau, Mathieu; Avolio, Giuseppe; Azuelos, Georges; Azuma, Yuya; Baak, Max; Baas, Alessandra; Bacci, Cesare; Bachacou, Henri; Bachas, Konstantinos; Backes, Moritz; Backhaus, Malte; Backus Mayes, John; Badescu, Elisabeta; Bagiacchi, Paolo; Bagnaia, Paolo; Bai, Yu; Bain, Travis; Baines, John; Baker, Oliver Keith; Balek, Petr; Balli, Fabrice; Banas, Elzbieta; Banerjee, Swagato; Bannoura, Arwa A E; Bansal, Vikas; Bansil, Hardeep Singh; Barak, Liron; Baranov, Sergei; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Barillari, Teresa; Barisonzi, Marcello; Barklow, Timothy; Barlow, Nick; Barnett, Bruce; Barnett, Michael; Barnovska, Zuzana; Baroncelli, Antonio; Barone, Gaetano; Barr, Alan; Barreiro, Fernando; Barreiro Guimarães da Costa, João; Bartoldus, Rainer; Barton, Adam Edward; Bartos, Pavol; Bartsch, Valeria; Bassalat, Ahmed; Basye, Austin; Bates, Richard; Batley, Richard; Battaglia, Marco; Battistin, Michele; Bauer, Florian; Bawa, Harinder Singh; Beattie, Michael David; Beau, Tristan; Beauchemin, Pierre-Hugues; Beccherle, Roberto; Bechtle, Philip; Beck, Hans Peter; Becker, Anne Kathrin; Becker, Sebastian; Beckingham, Matthew; Becot, Cyril; Beddall, Andrew; Beddall, Ayda; Bedikian, Sourpouhi; Bednyakov, Vadim; Bee, Christopher; Beemster, Lars; Beermann, Thomas; Begel, Michael; Behr, Katharina; Belanger-Champagne, Camille; Bell, Paul; Bell, William; Bella, Gideon; Bellagamba, Lorenzo; Bellerive, Alain; Bellomo, Massimiliano; Belotskiy, Konstantin; Beltramello, Olga; Benary, Odette; Benchekroun, Driss; Bendtz, Katarina; Benekos, Nektarios; Benhammou, Yan; Benhar Noccioli, Eleonora; Benitez Garcia, Jorge-Armando; Benjamin, Douglas; Bensinger, James; Benslama, Kamal; Bentvelsen, Stan; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Berghaus, Frank; Beringer, Jürg; Bernard, Clare; Bernat, Pauline; Bernius, Catrin; Bernlochner, Florian Urs; Berry, Tracey; Berta, Peter; Bertella, Claudia; Bertoli, Gabriele; Bertolucci, Federico; Bertsche, Carolyn; Bertsche, David; Besana, Maria Ilaria; Besjes, Geert-Jan; Bessidskaia, Olga; Bessner, Martin Florian; Besson, Nathalie; Betancourt, Christopher; Bethke, Siegfried; Bhimji, Wahid; Bianchi, Riccardo-Maria; Bianchini, Louis; Bianco, Michele; Biebel, Otmar; Bieniek, Stephen Paul; Bierwagen, Katharina; Biesiada, Jed; Biglietti, Michela; Bilbao De Mendizabal, Javier; Bilokon, Halina; Bindi, Marcello; Binet, Sebastien; Bingul, Ahmet; Bini, Cesare; Black, Curtis; Black, James; Black, Kevin; Blackburn, Daniel; Blair, Robert; Blanchard, Jean-Baptiste; Blazek, Tomas; Bloch, Ingo; Blocker, Craig; Blum, Walter; Blumenschein, Ulrike; Bobbink, Gerjan; Bobrovnikov, Victor; Bocchetta, Simona Serena; Bocci, Andrea; Bock, Christopher; Boddy, Christopher Richard; Boehler, Michael; Boek, Thorsten Tobias; Bogaerts, Joannes Andreas; Bogdanchikov, Alexander; Bogouch, Andrei; Bohm, Christian; Bohm, Jan; Boisvert, Veronique; Bold, Tomasz; Boldea, Venera; Boldyrev, Alexey; Bomben, Marco; Bona, Marcella; Boonekamp, Maarten; Borisov, Anatoly; Borissov, Guennadi; Borri, Marcello; Borroni, Sara; Bortfeldt, Jonathan; Bortolotto, Valerio; Bos, Kors; Boscherini, Davide; Bosman, Martine; Boterenbrood, Hendrik; Boudreau, Joseph; Bouffard, Julian; Bouhova-Thacker, Evelina Vassileva; Boumediene, Djamel Eddine; Bourdarios, Claire; Bousson, Nicolas; Boutouil, Sara; Boveia, Antonio; Boyd, James; Boyko, Igor; Bracinik, Juraj; Brandt, Andrew; Brandt, Gerhard; Brandt, Oleg; Bratzler, Uwe; Brau, Benjamin; Brau, James; Braun, Helmut; Brazzale, Simone Federico; Brelier, Bertrand; Brendlinger, Kurt; Brennan, Amelia Jean; Brenner, Richard; Bressler, Shikma; Bristow, Kieran; Bristow, Timothy Michael; Britton, Dave; Brochu, Frederic; Brock, Ian; Brock, Raymond; Bromberg, Carl; Bronner, Johanna; Brooijmans, Gustaaf; Brooks, Timothy; Brooks, William; Brosamer, Jacquelyn; Brost, Elizabeth; Brown, Jonathan; Bruckman de Renstrom, Pawel; Bruncko, Dusan; Bruneliere, Renaud; Brunet, Sylvie; Bruni, Alessia; Bruni, Graziano; Bruschi, Marco; Bryngemark, Lene; Buanes, Trygve; Buat, Quentin; Bucci, Francesca; Buchholz, Peter; Buckingham, Ryan; Buckley, Andrew; Buda, Stelian Ioan; Budagov, Ioulian; Buehrer, Felix; Bugge, Lars; Bugge, Magnar Kopangen; Bulekov, Oleg; Bundock, Aaron Colin; Burckhart, Helfried; Burdin, Sergey; Burghgrave, Blake; Burke, Stephen; Burmeister, Ingo; Busato, Emmanuel; Büscher, Daniel; Büscher, Volker; Bussey, Peter; Buszello, Claus-Peter; Butler, Bart; Butler, John; Butt, Aatif Imtiaz; Buttar, Craig; Butterworth, Jonathan; Butti, Pierfrancesco; Buttinger, William; Buzatu, Adrian; Byszewski, Marcin; Cabrera Urbán, Susana; Caforio, Davide; Cakir, Orhan; Calafiura, Paolo; Calandri, Alessandro; Calderini, Giovanni; Calfayan, Philippe; Calkins, Robert; Caloba, Luiz; Calvet, David; Calvet, Samuel; Camacho Toro, Reina; Camarda, Stefano; Cameron, David; Caminada, Lea Michaela; Caminal Armadans, Roger; Campana, Simone; Campanelli, Mario; Campoverde, Angel; Canale, Vincenzo; Canepa, Anadi; Cano Bret, Marc; Cantero, Josu; Cantrill, Robert; Cao, Tingting; Capeans Garrido, Maria Del Mar; Caprini, Irinel; Caprini, Mihai; Capua, Marcella; Caputo, Regina; Cardarelli, Roberto; Carli, Tancredi; Carlino, Gianpaolo; Carminati, Leonardo; Caron, Sascha; Carquin, Edson; Carrillo-Montoya, German D; Carter, Janet; Carvalho, João; Casadei, Diego; Casado, Maria Pilar; Casolino, Mirkoantonio; Castaneda-Miranda, Elizabeth; Castelli, Angelantonio; Castillo Gimenez, Victoria; Castro, Nuno Filipe; Catastini, Pierluigi; Catinaccio, Andrea; Catmore, James; Cattai, Ariella; Cattani, Giordano; Caughron, Seth; Cavaliere, Viviana; Cavalli, Donatella; Cavalli-Sforza, Matteo; Cavasinni, Vincenzo; Ceradini, Filippo; Cerio, Benjamin; Cerny, Karel; Santiago Cerqueira, Augusto; Cerri, Alessandro; Cerrito, Lucio; Cerutti, Fabio; Cerv, Matevz; Cervelli, Alberto; Cetin, Serkant Ali; Chafaq, Aziz; Chakraborty, Dhiman; Chalupkova, Ina; Chang, Philip; Chapleau, Bertrand; Chapman, John Derek; Charfeddine, Driss; Charlton, Dave; Chau, Chav Chhiv; Chavez Barajas, Carlos Alberto; Cheatham, Susan; Chegwidden, Andrew; Chekanov, Sergei; Chekulaev, Sergey; Chelkov, Gueorgui; Chelstowska, Magda Anna; Chen, Chunhui; Chen, Hucheng; Chen, Karen; Chen, Liming; Chen, Shenjian; Chen, Xin; Chen, Ye; Chen, Yujiao; Cheng, Hok Chuen; Cheng, Yangyang; Cheplakov, Alexander; Cherkaoui El Moursli, Rajaa; Chernyatin, Valeriy; Cheu, Elliott; Chevalier, Laurent; Chiarella, Vitaliano; Chiefari, Giovanni; Childers, John Taylor; Chilingarov, Alexandre; Chiodini, Gabriele; Chisholm, Andrew; Chislett, Rebecca Thalatta; Chitan, Adrian; Chizhov, Mihail; Chouridou, Sofia; Chow, Bonnie Kar Bo; Chromek-Burckhart, Doris; Chu, Ming-Lee; Chudoba, Jiri; Chwastowski, Janusz; Chytka, Ladislav; Ciapetti, Guido; Ciftci, Abbas Kenan; Ciftci, Rena; Cinca, Diane; Cindro, Vladimir; Ciocio, Alessandra; Cirkovic, Predrag; Citron, Zvi Hirsh; Citterio, Mauro; Ciubancan, Mihai; Clark, Allan G; Clark, Philip James; Clarke, Robert; Cleland, Bill; Clemens, Jean-Claude; Clement, Christophe; Coadou, Yann; Cobal, Marina; Coccaro, Andrea; Cochran, James H; Coffey, Laurel; Cogan, Joshua Godfrey; Coggeshall, James; Cole, Brian; Cole, Stephen; Colijn, Auke-Pieter; Collot, Johann; Colombo, Tommaso; Colon, German; Compostella, Gabriele; Conde Muiño, Patricia; Coniavitis, Elias; Conidi, Maria Chiara; Connell, Simon Henry; Connelly, Ian; Consonni, Sofia Maria; Consorti, Valerio; Constantinescu, Serban; Conta, Claudio; Conti, Geraldine; Conventi, Francesco; Cooke, Mark; Cooper, Ben; Cooper-Sarkar, Amanda; Cooper-Smith, Neil; Copic, Katherine; Cornelissen, Thijs; Corradi, Massimo; Corriveau, Francois; Corso-Radu, Alina; Cortes-Gonzalez, Arely; Cortiana, Giorgio; Costa, Giuseppe; Costa, María José; Costanzo, Davide; Côté, David; Cottin, Giovanna; Cowan, Glen; Cox, Brian; Cranmer, Kyle; Cree, Graham; Crépé-Renaudin, Sabine; Crescioli, Francesco; Cribbs, Wayne Allen; Crispin Ortuzar, Mireia; Cristinziani, Markus; Croft, Vince; Crosetti, Giovanni; Cuciuc, Constantin-Mihai; Cuhadar Donszelmann, Tulay; Cummings, Jane; Curatolo, Maria; Cuthbert, Cameron; Czirr, Hendrik; Czodrowski, Patrick; Czyczula, Zofia; D'Auria, Saverio; D'Onofrio, Monica; Da Cunha Sargedas De Sousa, Mario Jose; Da Via, Cinzia; Dabrowski, Wladyslaw; Dafinca, Alexandru; Dai, Tiesheng; Dale, Orjan; Dallaire, Frederick; Dallapiccola, Carlo; Dam, Mogens; Daniells, Andrew Christopher; Dano Hoffmann, Maria; Dao, Valerio; Darbo, Giovanni; Darmora, Smita; Dassoulas, James; Dattagupta, Aparajita; Davey, Will; David, Claire; Davidek, Tomas; Davies, Eleanor; Davies, Merlin; Davignon, Olivier; Davison, Adam; Davison, Peter; Davygora, Yuriy; Dawe, Edmund; Dawson, Ian; Daya-Ishmukhametova, Rozmin; De, Kaushik; de Asmundis, Riccardo; De Castro, Stefano; De Cecco, Sandro; De Groot, Nicolo; de Jong, Paul; De la Torre, Hector; De Lorenzi, Francesco; De Nooij, Lucie; De Pedis, Daniele; De Salvo, Alessandro; De Sanctis, Umberto; De Santo, Antonella; De Vivie De Regie, Jean-Baptiste; Dearnaley, William James; Debbe, Ramiro; Debenedetti, Chiara; Dechenaux, Benjamin; Dedovich, Dmitri; Deigaard, Ingrid; Del Peso, Jose; Del Prete, Tarcisio; Deliot, Frederic; Delitzsch, Chris Malena; Deliyergiyev, Maksym; Dell'Acqua, Andrea; Dell'Asta, Lidia; Dell'Orso, Mauro; Della Pietra, Massimo; della Volpe, Domenico; Delmastro, Marco; Delsart, Pierre-Antoine; Deluca, Carolina; Demers, Sarah; Demichev, Mikhail; Demilly, Aurelien; Denisov, Sergey; Derendarz, Dominik; Derkaoui, Jamal Eddine; Derue, Frederic; Dervan, Paul; Desch, Klaus Kurt; Deterre, Cecile; Deviveiros, Pier-Olivier; Dewhurst, Alastair; Dhaliwal, Saminder; Di Ciaccio, Anna; Di Ciaccio, Lucia; Di Domenico, Antonio; Di Donato, Camilla; Di Girolamo, Alessandro; Di Girolamo, Beniamino; Di Mattia, Alessandro; Di Micco, Biagio; Di Nardo, Roberto; Di Simone, Andrea; Di Sipio, Riccardo; Di Valentino, David; Dias, Flavia; Diaz, Marco Aurelio; Diehl, Edward; Dietrich, Janet; Dietzsch, Thorsten; Diglio, Sara; Dimitrievska, Aleksandra; Dingfelder, Jochen; Dionisi, Carlo; Dita, Petre; Dita, Sanda; Dittus, Fridolin; Djama, Fares; Djobava, Tamar; Barros do Vale, Maria Aline; Do Valle Wemans, André; Doan, Thi Kieu Oanh; Dobos, Daniel; Doglioni, Caterina; Doherty, Tom; Dohmae, Takeshi; Dolejsi, Jiri; Dolezal, Zdenek; Dolgoshein, Boris; Donadelli, Marisilvia; Donati, Simone; Dondero, Paolo; Donini, Julien; Dopke, Jens; Doria, Alessandra; Dova, Maria-Teresa; Doyle, Tony; Dris, Manolis; Dubbert, Jörg; Dube, Sourabh; Dubreuil, Emmanuelle; Duchovni, Ehud; Duckeck, Guenter; Ducu, Otilia Anamaria; Duda, Dominik; Dudarev, Alexey; Dudziak, Fanny; Duflot, Laurent; Duguid, Liam; Dührssen, Michael; Dunford, Monica; Duran Yildiz, Hatice; Düren, Michael; Durglishvili, Archil; Dwuznik, Michal; Dyndal, Mateusz; Ebke, Johannes; Edson, William; Edwards, Nicholas Charles; Ehrenfeld, Wolfgang; Eifert, Till; Eigen, Gerald; Einsweiler, Kevin; Ekelof, Tord; El Kacimi, Mohamed; Ellert, Mattias; Elles, Sabine; Ellinghaus, Frank; Ellis, Nicolas; Elmsheuser, Johannes; Elsing, Markus; Emeliyanov, Dmitry; Enari, Yuji; Endner, Oliver Chris; Endo, Masaki; Engelmann, Roderich; Erdmann, Johannes; Ereditato, Antonio; Eriksson, Daniel; Ernis, Gunar; Ernst, Jesse; Ernst, Michael; Ernwein, Jean; Errede, Deborah; Errede, Steven; Ertel, Eugen; Escalier, Marc; Esch, Hendrik; Escobar, Carlos; Esposito, Bellisario; Etienvre, Anne-Isabelle; Etzion, Erez; Evans, Hal; Ezhilov, Alexey; Fabbri, Laura; Facini, Gabriel; Fakhrutdinov, Rinat; Falciano, Speranza; Falla, Rebecca Jane; Faltova, Jana; Fang, Yaquan; Fanti, Marcello; Farbin, Amir; Farilla, Addolorata; Farooque, Trisha; Farrell, Steven; Farrington, Sinead; Farthouat, Philippe; Fassi, Farida; Fassnacht, Patrick; Fassouliotis, Dimitrios; Favareto, Andrea; Fayard, Louis; Federic, Pavol; Fedin, Oleg; Fedorko, Wojciech; Fehling-Kaschek, Mirjam; Feigl, Simon; Feligioni, Lorenzo; Feng, Cunfeng; Feng, Eric; Feng, Haolu; Fenyuk, Alexander; Fernandez Perez, Sonia; Ferrag, Samir; Ferrando, James; Ferrari, Arnaud; Ferrari, Pamela; Ferrari, Roberto; Ferreira de Lima, Danilo Enoque; Ferrer, Antonio; Ferrere, Didier; Ferretti, Claudio; Ferretto Parodi, Andrea; Fiascaris, Maria; Fiedler, Frank; Filipčič, Andrej; Filipuzzi, Marco; Filthaut, Frank; Fincke-Keeler, Margret; Finelli, Kevin Daniel; Fiolhais, Miguel; Fiorini, Luca; Firan, Ana; Fischer, Adam; Fischer, Julia; Fisher, Wade Cameron; Fitzgerald, Eric Andrew; Flechl, Martin; Fleck, Ivor; Fleischmann, Philipp; Fleischmann, Sebastian; Fletcher, Gareth Thomas; Fletcher, Gregory; Flick, Tobias; Floderus, Anders; Flores Castillo, Luis; Florez Bustos, Andres Carlos; Flowerdew, Michael; Formica, Andrea; Forti, Alessandra; Fortin, Dominique; Fournier, Daniel; Fox, Harald; Fracchia, Silvia; Francavilla, Paolo; Franchini, Matteo; Franchino, Silvia; Francis, David; Franconi, Laura; Franklin, Melissa; Franz, Sebastien; Fraternali, Marco; French, Sky; Friedrich, Conrad; Friedrich, Felix; Froidevaux, Daniel; Frost, James; Fukunaga, Chikara; Fullana Torregrosa, Esteban; Fulsom, Bryan Gregory; Fuster, Juan; Gabaldon, Carolina; Gabizon, Ofir; Gabrielli, Alessandro; Gabrielli, Andrea; Gadatsch, Stefan; Gadomski, Szymon; Gagliardi, Guido; Gagnon, Pauline; Galea, Cristina; Galhardo, Bruno; Gallas, Elizabeth; Gallo, Valentina Santina; Gallop, Bruce; Gallus, Petr; Galster, Gorm Aske Gram Krohn; Gan, KK; Gao, Jun; Gao, Yongsheng; Garay Walls, Francisca; Garberson, Ford; García, Carmen; García Navarro, José Enrique; Garcia-Sciveres, Maurice; Gardner, Robert; Garelli, Nicoletta; Garonne, Vincent; Gatti, Claudio; Gaudio, Gabriella; Gaur, Bakul; Gauthier, Lea; Gauzzi, Paolo; Gavrilenko, Igor; Gay, Colin; Gaycken, Goetz; Gazis, Evangelos; Ge, Peng; Gecse, Zoltan; Gee, Norman; Geerts, Daniël Alphonsus Adrianus; Geich-Gimbel, Christoph; Gellerstedt, Karl; Gemme, Claudia; Gemmell, Alistair; Genest, Marie-Hélène; Gentile, Simonetta; George, Matthias; George, Simon; Gerbaudo, Davide; Gershon, Avi; Ghazlane, Hamid; Ghodbane, Nabil; Giacobbe, Benedetto; Giagu, Stefano; Giangiobbe, Vincent; Giannetti, Paola; Gianotti, Fabiola; Gibbard, Bruce; Gibson, Stephen; Gilchriese, Murdock; Gillam, Thomas; Gillberg, Dag; Gilles, Geoffrey; Gingrich, Douglas; Giokaris, Nikos; Giordani, MarioPaolo; Giordano, Raffaele; Giorgi, Filippo Maria; Giorgi, Francesco Michelangelo; Giraud, Pierre-Francois; Giugni, Danilo; Giuliani, Claudia; Giulini, Maddalena; Gjelsten, Børge Kile; Gkaitatzis, Stamatios; Gkialas, Ioannis; Gladilin, Leonid; Glasman, Claudia; Glatzer, Julian; Glaysher, Paul; Glazov, Alexandre; Glonti, George; Goblirsch-Kolb, Maximilian; Goddard, Jack Robert; Godfrey, Jennifer; Godlewski, Jan; Goeringer, Christian; Goldfarb, Steven; Golling, Tobias; Golubkov, Dmitry; Gomes, Agostinho; Gomez Fajardo, Luz Stella; Gonçalo, Ricardo; Goncalves Pinto Firmino Da Costa, Joao; Gonella, Laura; González de la Hoz, Santiago; Gonzalez Parra, Garoe; Gonzalez-Sevilla, Sergio; Goossens, Luc; Gorbounov, Petr Andreevich; Gordon, Howard; Gorelov, Igor; Gorini, Benedetto; Gorini, Edoardo; Gorišek, Andrej; Gornicki, Edward; Goshaw, Alfred; Gössling, Claus; Gostkin, Mikhail Ivanovitch; Gouighri, Mohamed; Goujdami, Driss; Goulette, Marc Phillippe; Goussiou, Anna; Goy, Corinne; Gozpinar, Serdar; Grabas, Herve Marie Xavier; Graber, Lars; Grabowska-Bold, Iwona; Grafström, Per; Grahn, Karl-Johan; Gramling, Johanna; Gramstad, Eirik; Grancagnolo, Sergio; Grassi, Valerio; Gratchev, Vadim; Gray, Heather; Graziani, Enrico; Grebenyuk, Oleg; Greenwood, Zeno Dixon; Gregersen, Kristian; Gregor, Ingrid-Maria; Grenier, Philippe; Griffiths, Justin; Grillo, Alexander; Grimm, Kathryn; Grinstein, Sebastian; Gris, Philippe Luc Yves; Grishkevich, Yaroslav; Grivaz, Jean-Francois; Grohs, Johannes Philipp; Grohsjean, Alexander; Gross, Eilam; Grosse-Knetter, Joern; Grossi, Giulio Cornelio; Groth-Jensen, Jacob; Grout, Zara Jane; Guan, Liang; Guescini, Francesco; Guest, Daniel; Gueta, Orel; Guicheney, Christophe; Guido, Elisa; Guillemin, Thibault; Guindon, Stefan; Gul, Umar; Gumpert, Christian; Gunther, Jaroslav; Guo, Jun; Gupta, Shaun; Gutierrez, Phillip; Gutierrez Ortiz, Nicolas Gilberto; Gutschow, Christian; Guttman, Nir; Guyot, Claude; Gwenlan, Claire; Gwilliam, Carl; Haas, Andy; Haber, Carl; Hadavand, Haleh Khani; Haddad, Nacim; Haefner, Petra; Hageböck, Stephan; Hajduk, Zbigniew; Hakobyan, Hrachya; Haleem, Mahsana; Hall, David; Halladjian, Garabed; Hamacher, Klaus; Hamal, Petr; Hamano, Kenji; Hamer, Matthias; Hamilton, Andrew; Hamilton, Samuel; Hamity, Guillermo Nicolas; Hamnett, Phillip George; Han, Liang; Hanagaki, Kazunori; Hanawa, Keita; Hance, Michael; Hanke, Paul; Hanna, Remie; Hansen, Jørgen Beck; Hansen, Jorn Dines; Hansen, Peter Henrik; Hara, Kazuhiko; Hard, Andrew; Harenberg, Torsten; Hariri, Faten; Harkusha, Siarhei; Harper, Devin; Harrington, Robert; Harris, Orin; Harrison, Paul Fraser; Hartjes, Fred; Hasegawa, Makoto; Hasegawa, Satoshi; Hasegawa, Yoji; Hasib, A; Hassani, Samira; Haug, Sigve; Hauschild, Michael; Hauser, Reiner; Havranek, Miroslav; Hawkes, Christopher; Hawkings, Richard John; Hawkins, Anthony David; Hayashi, Takayasu; Hayden, Daniel; Hays, Chris; Hayward, Helen; Haywood, Stephen; Head, Simon; Heck, Tobias; Hedberg, Vincent; Heelan, Louise; Heim, Sarah; Heim, Timon; Heinemann, Beate; Heinrich, Lukas; Hejbal, Jiri; Helary, Louis; Heller, Claudio; Heller, Matthieu; Hellman, Sten; Hellmich, Dennis; Helsens, Clement; Henderson, James; Henderson, Robert; Heng, Yang; Hengler, Christopher; Henrichs, Anna; Henriques Correia, Ana Maria; Henrot-Versille, Sophie; Hensel, Carsten; Herbert, Geoffrey Henry; Hernández Jiménez, Yesenia; Herrberg-Schubert, Ruth; Herten, Gregor; Hertenberger, Ralf; Hervas, Luis; Hesketh, Gavin Grant; Hessey, Nigel; Hickling, Robert; Higón-Rodriguez, Emilio; Hill, Ewan; Hill, John; Hiller, Karl Heinz; Hillert, Sonja; Hillier, Stephen; Hinchliffe, Ian; Hines, Elizabeth; Hirose, Minoru; Hirschbuehl, Dominic; Hobbs, John; Hod, Noam; Hodgkinson, Mark; Hodgson, Paul; Hoecker, Andreas; Hoeferkamp, Martin; Hoenig, Friedrich; Hoffman, Julia; Hoffmann, Dirk; Hofmann, Julia Isabell; Hohlfeld, Marc; Holmes, Tova Ray; Hong, Tae Min; Hooft van Huysduynen, Loek; Horii, Yasuyuki; Hostachy, Jean-Yves; Hou, Suen; Hoummada, Abdeslam; Howard, Jacob; Howarth, James; Hrabovsky, Miroslav; Hristova, Ivana; Hrivnac, Julius; Hryn'ova, Tetiana; Hsu, Catherine; Hsu, Pai-hsien Jennifer; Hsu, Shih-Chieh; Hu, Diedi; Hu, Xueye; Huang, Yanping; Hubacek, Zdenek; Hubaut, Fabrice; Huegging, Fabian; Huffman, Todd Brian; Hughes, Emlyn; Hughes, Gareth; Huhtinen, Mika; Hülsing, Tobias Alexander; Hurwitz, Martina; Huseynov, Nazim; Huston, Joey; Huth, John; Iacobucci, Giuseppe; Iakovidis, Georgios; Ibragimov, Iskander; Iconomidou-Fayard, Lydia; Ideal, Emma; Iengo, Paolo; Igonkina, Olga; Iizawa, Tomoya; Ikegami, Yoichi; Ikematsu, Katsumasa; Ikeno, Masahiro; Ilchenko, Iurii; Iliadis, Dimitrios; Ilic, Nikolina; Inamaru, Yuki; Ince, Tayfun; Ioannou, Pavlos; Iodice, Mauro; Iordanidou, Kalliopi; Ippolito, Valerio; Irles Quiles, Adrian; Isaksson, Charlie; Ishino, Masaya; Ishitsuka, Masaki; Ishmukhametov, Renat; Issever, Cigdem; Istin, Serhat; Iturbe Ponce, Julia Mariana; Iuppa, Roberto; Ivarsson, Jenny; Iwanski, Wieslaw; Iwasaki, Hiroyuki; Izen, Joseph; Izzo, Vincenzo; Jackson, Brett; Jackson, Matthew; Jackson, Paul; Jaekel, Martin; Jain, Vivek; Jakobs, Karl; Jakobsen, Sune; Jakoubek, Tomas; Jakubek, Jan; Jamin, David Olivier; Jana, Dilip; Jansen, Eric; Jansen, Hendrik; Janssen, Jens; Janus, Michel; Jarlskog, Göran; Javadov, Namig; Javůrek, Tomáš; Jeanty, Laura; Jejelava, Juansher; Jeng, Geng-yuan; Jennens, David; Jenni, Peter; Jentzsch, Jennifer; Jeske, Carl; Jézéquel, Stéphane; Ji, Haoshuang; Jia, Jiangyong; Jiang, Yi; Jimenez Belenguer, Marcos; Jin, Shan; Jinaru, Adam; Jinnouchi, Osamu; Joergensen, Morten Dam; Johansson, Erik; Johansson, Per; Johns, Kenneth; Jon-And, Kerstin; Jones, Graham; Jones, Roger; Jones, Tim; Jongmanns, Jan; Jorge, Pedro; Joshi, Kiran Daniel; Jovicevic, Jelena; Ju, Xiangyang; Jung, Christian; Jungst, Ralph Markus; Jussel, Patrick; Juste Rozas, Aurelio; Kaci, Mohammed; Kaczmarska, Anna; Kado, Marumi; Kagan, Harris; Kagan, Michael; Kajomovitz, Enrique; Kalderon, Charles William; Kama, Sami; Kamenshchikov, Andrey; Kanaya, Naoko; Kaneda, Michiru; Kaneti, Steven; Kantserov, Vadim; Kanzaki, Junichi; Kaplan, Benjamin; Kapliy, Anton; Kar, Deepak; Karakostas, Konstantinos; Karastathis, Nikolaos; Karnevskiy, Mikhail; Karpov, Sergey; Karpova, Zoya; Karthik, Krishnaiyengar; Kartvelishvili, Vakhtang; Karyukhin, Andrey; Kashif, Lashkar; Kasieczka, Gregor; Kass, Richard; Kastanas, Alex; Kataoka, Yousuke; Katre, Akshay; Katzy, Judith; Kaushik, Venkatesh; Kawagoe, Kiyotomo; Kawamoto, Tatsuo; Kawamura, Gen; Kazama, Shingo; Kazanin, Vassili; Kazarinov, Makhail; Keeler, Richard; Kehoe, Robert; Keil, Markus; Keller, John; Kempster, Jacob Julian; Keoshkerian, Houry; Kepka, Oldrich; Kerševan, Borut Paul; Kersten, Susanne; Kessoku, Kohei; Keung, Justin; Khalil-zada, Farkhad; Khandanyan, Hovhannes; Khanov, Alexander; Khodinov, Alexander; Khomich, Andrei; Khoo, Teng Jian; Khoriauli, Gia; Khoroshilov, Andrey; Khovanskiy, Valery; Khramov, Evgeniy; Khubua, Jemal; Kim, Hee Yeun; Kim, Hyeon Jin; Kim, Shinhong; Kimura, Naoki; Kind, Oliver; King, Barry; King, Matthew; King, Robert Steven Beaufoy; King, Samuel Burton; Kirk, Julie; Kiryunin, Andrey; Kishimoto, Tomoe; Kisielewska, Danuta; Kiss, Florian; Kittelmann, Thomas; Kiuchi, Kenji; Kladiva, Eduard; Klein, Max; Klein, Uta; Kleinknecht, Konrad; Klimek, Pawel; Klimentov, Alexei; Klingenberg, Reiner; Klinger, Joel Alexander; Klioutchnikova, Tatiana; Klok, Peter; Kluge, Eike-Erik; Kluit, Peter; Kluth, Stefan; Kneringer, Emmerich; Knoops, Edith; Knue, Andrea; Kobayashi, Dai; Kobayashi, Tomio; Kobel, Michael; Kocian, Martin; Kodys, Peter; Koevesarki, Peter; Koffas, Thomas; Koffeman, Els; Kogan, Lucy Anne; Kohlmann, Simon; Kohout, Zdenek; Kohriki, Takashi; Koi, Tatsumi; Kolanoski, Hermann; Koletsou, Iro; Koll, James; Komar, Aston; Komori, Yuto; Kondo, Takahiko; Kondrashova, Nataliia; Köneke, Karsten; König, Adriaan; König, Sebastian; Kono, Takanori; Konoplich, Rostislav; Konstantinidis, Nikolaos; Kopeliansky, Revital; Koperny, Stefan; Köpke, Lutz; Kopp, Anna Katharina; Korcyl, Krzysztof; Kordas, Kostantinos; Korn, Andreas; Korol, Aleksandr; Korolkov, Ilya; Korolkova, Elena; Korotkov, Vladislav; Kortner, Oliver; Kortner, Sandra; Kostyukhin, Vadim; Kotov, Vladislav; Kotwal, Ashutosh; Kourkoumelis, Christine; Kouskoura, Vasiliki; Koutsman, Alex; Kowalewski, Robert Victor; Kowalski, Tadeusz; Kozanecki, Witold; Kozhin, Anatoly; Kral, Vlastimil; Kramarenko, Viktor; Kramberger, Gregor; Krasnopevtsev, Dimitriy; Krasny, Mieczyslaw Witold; Krasznahorkay, Attila; Kraus, Jana; Kravchenko, Anton; Kreiss, Sven; Kretz, Moritz; Kretzschmar, Jan; Kreutzfeldt, Kristof; Krieger, Peter; Kroeninger, Kevin; Kroha, Hubert; Kroll, Joe; Kroseberg, Juergen; Krstic, Jelena; Kruchonak, Uladzimir; Krüger, Hans; Kruker, Tobias; Krumnack, Nils; Krumshteyn, Zinovii; Kruse, Amanda; Kruse, Mark; Kruskal, Michael; Kubota, Takashi; Kuday, Sinan; Kuehn, Susanne; Kugel, Andreas; Kuhl, Andrew; Kuhl, Thorsten; Kukhtin, Victor; Kulchitsky, Yuri; Kuleshov, Sergey; Kuna, Marine; Kunkle, Joshua; Kupco, Alexander; Kurashige, Hisaya; Kurochkin, Yurii; Kurumida, Rie; Kus, Vlastimil; Kuwertz, Emma Sian; Kuze, Masahiro; Kvita, Jiri; La Rosa, Alessandro; La Rotonda, Laura; Lacasta, Carlos; Lacava, Francesco; Lacey, James; Lacker, Heiko; Lacour, Didier; Lacuesta, Vicente Ramón; Ladygin, Evgueni; Lafaye, Remi; Laforge, Bertrand; Lagouri, Theodota; Lai, Stanley; Laier, Heiko; Lambourne, Luke; Lammers, Sabine; Lampen, Caleb; Lampl, Walter; Lançon, Eric; Landgraf, Ulrich; Landon, Murrough; Lang, Valerie Susanne; Lankford, Andrew; Lanni, Francesco; Lantzsch, Kerstin; Laplace, Sandrine; Lapoire, Cecile; Laporte, Jean-Francois; Lari, Tommaso; Lassnig, Mario; Laurelli, Paolo; Lavrijsen, Wim; Law, Alexander; Laycock, Paul; Le Dortz, Olivier; Le Guirriec, Emmanuel; Le Menedeu, Eve; LeCompte, Thomas; Ledroit-Guillon, Fabienne Agnes Marie; Lee, Claire Alexandra; Lee, Hurng-Chun; Lee, Jason; Lee, Shih-Chang; Lee, Lawrence; Lefebvre, Guillaume; Lefebvre, Michel; Legger, Federica; Leggett, Charles; Lehan, Allan; Lehmacher, Marc; Lehmann Miotto, Giovanna; Lei, Xiaowen; Leight, William Axel; Leisos, Antonios; Leister, Andrew Gerard; Leite, Marco Aurelio Lisboa; Leitner, Rupert; Lellouch, Daniel; Lemmer, Boris; Leney, Katharine; Lenz, Tatjana; Lenzen, Georg; Lenzi, Bruno; Leone, Robert; Leone, Sandra; Leonhardt, Kathrin; Leonidopoulos, Christos; Leontsinis, Stefanos; Leroy, Claude; Lester, Christopher; Lester, Christopher Michael; Levchenko, Mikhail; Levêque, Jessica; Levin, Daniel; Levinson, Lorne; Levy, Mark; Lewis, Adrian; Lewis, George; Leyko, Agnieszka; Leyton, Michael; Li, Bing; Li, Bo; Li, Haifeng; Li, Ho Ling; Li, Lei; Li, Liang; Li, Shu; Li, Yichen; Liang, Zhijun; Liao, Hongbo; Liberti, Barbara; Lichard, Peter; Lie, Ki; Liebal, Jessica; Liebig, Wolfgang; Limbach, Christian; Limosani, Antonio; Lin, Simon; Lin, Tai-Hua; Linde, Frank; Lindquist, Brian Edward; Linnemann, James; Lipeles, Elliot; Lipniacka, Anna; Lisovyi, Mykhailo; Liss, Tony; Lissauer, David; Lister, Alison; Litke, Alan; Liu, Bo; Liu, Dong; Liu, Jianbei; Liu, Kun; Liu, Lulu; Liu, Miaoyuan; Liu, Minghui; Liu, Yanwen; Livan, Michele; Livermore, Sarah; Lleres, Annick; Llorente Merino, Javier; Lloyd, Stephen; Lo Sterzo, Francesco; Lobodzinska, Ewelina; Loch, Peter; Lockman, William; Loddenkoetter, Thomas; Loebinger, Fred; Loevschall-Jensen, Ask Emil; Loginov, Andrey; Lohse, Thomas; Lohwasser, Kristin; Lokajicek, Milos; Lombardo, Vincenzo Paolo; Long, Brian Alexander; Long, Jonathan; Long, Robin Eamonn; Lopes, Lourenco; Lopez Mateos, David; Lopez Paredes, Brais; Lopez Paz, Ivan; Lorenz, Jeanette; Lorenzo Martinez, Narei; Losada, Marta; Loscutoff, Peter; Lou, XinChou; Lounis, Abdenour; Love, Jeremy; Love, Peter; Lowe, Andrew; Lu, Feng; Lu, Nan; Lubatti, Henry; Luci, Claudio; Lucotte, Arnaud; Luehring, Frederick; Lukas, Wolfgang; Luminari, Lamberto; Lundberg, Olof; Lund-Jensen, Bengt; Lungwitz, Matthias; Lynn, David; Lysak, Roman; Lytken, Else; Ma, Hong; Ma, Lian Liang; Maccarrone, Giovanni; Macchiolo, Anna; Machado Miguens, Joana; Macina, Daniela; Madaffari, Daniele; Madar, Romain; Maddocks, Harvey Jonathan; Mader, Wolfgang; Madsen, Alexander; Maeno, Mayuko; Maeno, Tadashi; Magradze, Erekle; Mahboubi, Kambiz; Mahlstedt, Joern; Mahmoud, Sara; Maiani, Camilla; Maidantchik, Carmen; Maier, Andreas Alexander; Maio, Amélia; Majewski, Stephanie; Makida, Yasuhiro; Makovec, Nikola; Mal, Prolay; Malaescu, Bogdan; Malecki, Pawel; Maleev, Victor; Malek, Fairouz; Mallik, Usha; Malon, David; Malone, Caitlin; Maltezos, Stavros; Malyshev, Vladimir; Malyukov, Sergei; Mamuzic, Judita; Mandelli, Beatrice; Mandelli, Luciano; Mandić, Igor; Mandrysch, Rocco; Maneira, José; Manfredini, Alessandro; Manhaes de Andrade Filho, Luciano; Manjarres Ramos, Joany Andreina; Mann, Alexander; Manning, Peter; Manousakis-Katsikakis, Arkadios; Mansoulie, Bruno; Mantifel, Rodger; Mapelli, Livio; March, Luis; Marchand, Jean-Francois; Marchiori, Giovanni; Marcisovsky, Michal; Marino, Christopher; Marjanovic, Marija; Marques, Carlos; Marroquim, Fernando; Marsden, Stephen Philip; Marshall, Zach; Marti, Lukas Fritz; Marti-Garcia, Salvador; Martin, Brian; Martin, Brian Thomas; Martin, Tim; Martin, Victoria Jane; Martin dit Latour, Bertrand; Martinez, Homero; Martinez, Mario; Martin-Haugh, Stewart; Martyniuk, Alex; Marx, Marilyn; Marzano, Francesco; Marzin, Antoine; Masetti, Lucia; Mashimo, Tetsuro; Mashinistov, Ruslan; Masik, Jiri; Maslennikov, Alexey; Massa, Ignazio; Massa, Lorenzo; Massol, Nicolas; Mastrandrea, Paolo; Mastroberardino, Anna; Masubuchi, Tatsuya; Mättig, Peter; Mattmann, Johannes; Maurer, Julien; Maxfield, Stephen; Maximov, Dmitriy; Mazini, Rachid; Mazzaferro, Luca; Mc Goldrick, Garrin; Mc Kee, Shawn Patrick; McCarn, Allison; McCarthy, Robert; McCarthy, Tom; McCubbin, Norman; McFarlane, Kenneth; Mcfayden, Josh; Mchedlidze, Gvantsa; McMahon, Steve; McPherson, Robert; Meade, Andrew; Mechnich, Joerg; Medinnis, Michael; Meehan, Samuel; Mehlhase, Sascha; Mehta, Andrew; Meier, Karlheinz; Meineck, Christian; Meirose, Bernhard; Melachrinos, Constantinos; Mellado Garcia, Bruce Rafael; Meloni, Federico; Mengarelli, Alberto; Menke, Sven; Meoni, Evelin; Mercurio, Kevin Michael; Mergelmeyer, Sebastian; Meric, Nicolas; Mermod, Philippe; Merola, Leonardo; Meroni, Chiara; Merritt, Frank; Merritt, Hayes; Messina, Andrea; Metcalfe, Jessica; Mete, Alaettin Serhan; Meyer, Carsten; Meyer, Christopher; Meyer, Jean-Pierre; Meyer, Jochen; Middleton, Robin; Migas, Sylwia; Mijović, Liza; Mikenberg, Giora; Mikestikova, Marcela; Mikuž, Marko; Milic, Adriana; Miller, David; Mills, Corrinne; Milov, Alexander; Milstead, David; Milstein, Dmitry; Minaenko, Andrey; Minashvili, Irakli; Mincer, Allen; Mindur, Bartosz; Mineev, Mikhail; Ming, Yao; Mir, Lluisa-Maria; Mirabelli, Giovanni; Mitani, Takashi; Mitrevski, Jovan; Mitsou, Vasiliki A; Mitsui, Shingo; Miucci, Antonio; Miyagawa, Paul; Mjörnmark, Jan-Ulf; Moa, Torbjoern; Mochizuki, Kazuya; Mohapatra, Soumya; Mohr, Wolfgang; Molander, Simon; Moles-Valls, Regina; Mönig, Klaus; Monini, Caterina; Monk, James; Monnier, Emmanuel; Montejo Berlingen, Javier; Monticelli, Fernando; Monzani, Simone; Moore, Roger; Moraes, Arthur; Morange, Nicolas; Moreno, Deywis; Moreno Llácer, María; Morettini, Paolo; Morgenstern, Marcus; Morii, Masahiro; Moritz, Sebastian; Morley, Anthony Keith; Mornacchi, Giuseppe; Morris, John; Morvaj, Ljiljana; Moser, Hans-Guenther; Mosidze, Maia; Moss, Josh; Motohashi, Kazuki; Mount, Richard; Mountricha, Eleni; Mouraviev, Sergei; Moyse, Edward; Muanza, Steve; Mudd, Richard; Mueller, Felix; Mueller, James; Mueller, Klemens; Mueller, Thibaut; Mueller, Timo; Muenstermann, Daniel; Munwes, Yonathan; Murillo Quijada, Javier Alberto; Murray, Bill; Musheghyan, Haykuhi; Musto, Elisa; Myagkov, Alexey; Myska, Miroslav; Nackenhorst, Olaf; Nadal, Jordi; Nagai, Koichi; Nagai, Ryo; Nagai, Yoshikazu; Nagano, Kunihiro; Nagarkar, Advait; Nagasaka, Yasushi; Nagel, Martin; Nairz, Armin Michael; Nakahama, Yu; Nakamura, Koji; Nakamura, Tomoaki; Nakano, Itsuo; Namasivayam, Harisankar; Nanava, Gizo; Narayan, Rohin; Nattermann, Till; Naumann, Thomas; Navarro, Gabriela; Nayyar, Ruchika; Neal, Homer; Nechaeva, Polina; Neep, Thomas James; Nef, Pascal Daniel; Negri, Andrea; Negri, Guido; Negrini, Matteo; Nektarijevic, Snezana; Nelson, Andrew; Nelson, Timothy Knight; Nemecek, Stanislav; Nemethy, Peter; Nepomuceno, Andre Asevedo; Nessi, Marzio; Neubauer, Mark; Neumann, Manuel; Neves, Ricardo; Nevski, Pavel; Newman, Paul; Nguyen, Duong Hai; Nickerson, Richard; Nicolaidou, Rosy; Nicquevert, Bertrand; Nielsen, Jason; Nikiforou, Nikiforos; Nikiforov, Andriy; Nikolaenko, Vladimir; Nikolic-Audit, Irena; Nikolics, Katalin; Nikolopoulos, Konstantinos; Nilsson, Paul; Ninomiya, Yoichi; Nisati, Aleandro; Nisius, Richard; Nobe, Takuya; Nodulman, Lawrence; Nomachi, Masaharu; Nomidis, Ioannis; Norberg, Scarlet; Nordberg, Markus; Novgorodova, Olga; Nowak, Sebastian; Nozaki, Mitsuaki; Nozka, Libor; Ntekas, Konstantinos; Nunes Hanninger, Guilherme; Nunnemann, Thomas; Nurse, Emily; Nuti, Francesco; O'Brien, Brendan Joseph; O'grady, Fionnbarr; O'Neil, Dugan; O'Shea, Val; Oakham, Gerald; Oberlack, Horst; Obermann, Theresa; Ocariz, Jose; Ochi, Atsuhiko; Ochoa, Ines; Oda, Susumu; Odaka, Shigeru; Ogren, Harold; Oh, Alexander; Oh, Seog; Ohm, Christian; Ohman, Henrik; Okamura, Wataru; Okawa, Hideki; Okumura, Yasuyuki; Okuyama, Toyonobu; Olariu, Albert; Olchevski, Alexander; Olivares Pino, Sebastian Andres; Oliveira Damazio, Denis; Oliver Garcia, Elena; Olszewski, Andrzej; Olszowska, Jolanta; Onofre, António; Onyisi, Peter; Oram, Christopher; Oreglia, Mark; Oren, Yona; Orestano, Domizia; Orlando, Nicola; Oropeza Barrera, Cristina; Orr, Robert; Osculati, Bianca; Ospanov, Rustem; Otero y Garzon, Gustavo; Otono, Hidetoshi; Ouchrif, Mohamed; Ouellette, Eric; Ould-Saada, Farid; Ouraou, Ahmimed; Oussoren, Koen Pieter; Ouyang, Qun; Ovcharova, Ana; Owen, Mark; Ozcan, Veysi Erkcan; Ozturk, Nurcan; Pachal, Katherine; Pacheco Pages, Andres; Padilla Aranda, Cristobal; Pagáčová, Martina; Pagan Griso, Simone; Paganis, Efstathios; Pahl, Christoph; Paige, Frank; Pais, Preema; Pajchel, Katarina; Palacino, Gabriel; Palestini, Sandro; Palka, Marek; Pallin, Dominique; Palma, Alberto; Palmer, Jody; Pan, Yibin; Panagiotopoulou, Evgenia; Panduro Vazquez, William; Pani, Priscilla; Panikashvili, Natalia; Panitkin, Sergey; Pantea, Dan; Paolozzi, Lorenzo; Papadopoulou, Theodora; Papageorgiou, Konstantinos; Paramonov, Alexander; Paredes Hernandez, Daniela; Parker, Michael Andrew; Parodi, Fabrizio; Parsons, John; Parzefall, Ulrich; Pasqualucci, Enrico; Passaggio, Stefano; Passeri, Antonio; Pastore, Fernanda; Pastore, Francesca; Pásztor, Gabriella; Pataraia, Sophio; Patel, Nikhul; Pater, Joleen; Patricelli, Sergio; Pauly, Thilo; Pearce, James; Pedersen, Maiken; Pedraza Lopez, Sebastian; Pedro, Rute; Peleganchuk, Sergey; Pelikan, Daniel; Peng, Haiping; Penning, Bjoern; Penwell, John; Perepelitsa, Dennis; Perez Codina, Estel; Pérez García-Estañ, María Teresa; Perez Reale, Valeria; Perini, Laura; Pernegger, Heinz; Perrino, Roberto; Peschke, Richard; Peshekhonov, Vladimir; Peters, Krisztian; Peters, Yvonne; Petersen, Brian; Petersen, Troels; Petit, Elisabeth; Petridis, Andreas; Petridou, Chariclia; Petrolo, Emilio; Petrucci, Fabrizio; Pettersson, Nora Emilia; Pezoa, Raquel; Phillips, Peter William; Piacquadio, Giacinto; Pianori, Elisabetta; Picazio, Attilio; Piccaro, Elisa; Piccinini, Maurizio; Piegaia, Ricardo; Pignotti, David; Pilcher, James; Pilkington, Andrew; Pina, João Antonio; Pinamonti, Michele; Pinder, Alex; Pinfold, James; Pingel, Almut; Pinto, Belmiro; Pires, Sylvestre; Pitt, Michael; Pizio, Caterina; Plazak, Lukas; Pleier, Marc-Andre; Pleskot, Vojtech; Plotnikova, Elena; Plucinski, Pawel; Poddar, Sahill; Podlyski, Fabrice; Poettgen, Ruth; Poggioli, Luc; Pohl, David-leon; Pohl, Martin; Polesello, Giacomo; Policicchio, Antonio; Polifka, Richard; Polini, Alessandro; Pollard, Christopher Samuel; Polychronakos, Venetios; Pommès, Kathy; Pontecorvo, Ludovico; Pope, Bernard; Popeneciu, Gabriel Alexandru; Popovic, Dragan; Poppleton, Alan; Portell Bueso, Xavier; Pospisil, Stanislav; Potamianos, Karolos; Potrap, Igor; Potter, Christina; Potter, Christopher; Poulard, Gilbert; Poveda, Joaquin; Pozdnyakov, Valery; Pralavorio, Pascal; Pranko, Aliaksandr; Prasad, Srivas; Pravahan, Rishiraj; Prell, Soeren; Price, Darren; Price, Joe; Price, Lawrence; Prieur, Damien; Primavera, Margherita; Proissl, Manuel; Prokofiev, Kirill; Prokoshin, Fedor; Protopapadaki, Eftychia-sofia; Protopopescu, Serban; Proudfoot, James; Przybycien, Mariusz; Przysiezniak, Helenka; Ptacek, Elizabeth; Puddu, Daniele; Pueschel, Elisa; Puldon, David; Purohit, Milind; Puzo, Patrick; Qian, Jianming; Qin, Gang; Qin, Yang; Quadt, Arnulf; Quarrie, David; Quayle, William; Queitsch-Maitland, Michaela; Quilty, Donnchadha; Qureshi, Anum; Radeka, Veljko; Radescu, Voica; Radhakrishnan, Sooraj Krishnan; Radloff, Peter; Rados, Pere; Ragusa, Francesco; Rahal, Ghita; Rajagopalan, Srinivasan; Rammensee, Michael; Randle-Conde, Aidan Sean; Rangel-Smith, Camila; Rao, Kanury; Rauscher, Felix; Rave, Tobias Christian; Ravenscroft, Thomas; Raymond, Michel; Read, Alexander Lincoln; Readioff, Nathan Peter; Rebuzzi, Daniela; Redelbach, Andreas; Redlinger, George; Reece, Ryan; Reeves, Kendall; Rehnisch, Laura; Reisin, Hernan; Relich, Matthew; Rembser, Christoph; Ren, Huan; Ren, Zhongliang; Renaud, Adrien; Rescigno, Marco; Resconi, Silvia; Rezanova, Olga; Reznicek, Pavel; Rezvani, Reyhaneh; Richter, Robert; Ridel, Melissa; Rieck, Patrick; Rieger, Julia; Rijssenbeek, Michael; Rimoldi, Adele; Rinaldi, Lorenzo; Ritsch, Elmar; Riu, Imma; Rizatdinova, Flera; Rizvi, Eram; Robertson, Steven; Robichaud-Veronneau, Andree; Robinson, Dave; Robinson, James; Robson, Aidan; Roda, Chiara; Rodrigues, Luis; Roe, Shaun; Røhne, Ole; Rolli, Simona; Romaniouk, Anatoli; Romano, Marino; Romero Adam, Elena; Rompotis, Nikolaos; Ronzani, Manfredi; Roos, Lydia; Ros, Eduardo; Rosati, Stefano; Rosbach, Kilian; Rose, Matthew; Rose, Peyton; Rosendahl, Peter Lundgaard; Rosenthal, Oliver; Rossetti, Valerio; Rossi, Elvira; Rossi, Leonardo Paolo; Rosten, Rachel; Rotaru, Marina; Roth, Itamar; Rothberg, Joseph; Rousseau, David; Royon, Christophe; Rozanov, Alexandre; Rozen, Yoram; Ruan, Xifeng; Rubbo, Francesco; Rubinskiy, Igor; Rud, Viacheslav; Rudolph, Christian; Rudolph, Matthew Scott; Rühr, Frederik; Ruiz-Martinez, Aranzazu; Rurikova, Zuzana; Rusakovich, Nikolai; Ruschke, Alexander; Rutherfoord, John; Ruthmann, Nils; Ryabov, Yury; Rybar, Martin; Rybkin, Grigori; Ryder, Nick; Saavedra, Aldo; Sacerdoti, Sabrina; Saddique, Asif; Sadeh, Iftach; Sadrozinski, Hartmut; Sadykov, Renat; Safai Tehrani, Francesco; Sakamoto, Hiroshi; Sakurai, Yuki; Salamanna, Giuseppe; Salamon, Andrea; Saleem, Muhammad; Salek, David; Sales De Bruin, Pedro Henrique; Salihagic, Denis; Salnikov, Andrei; Salt, José; Salvatore, Daniela; Salvatore, Pasquale Fabrizio; Salvucci, Antonio; Salzburger, Andreas; Sampsonidis, Dimitrios; Sanchez, Arturo; Sánchez, Javier; Sanchez Martinez, Victoria; Sandaker, Heidi; Sandbach, Ruth Laura; Sander, Heinz Georg; Sanders, Michiel; Sandhoff, Marisa; Sandoval, Tanya; Sandoval, Carlos; Sandstroem, Rikard; Sankey, Dave; Sansoni, Andrea; Santoni, Claudio; Santonico, Rinaldo; Santos, Helena; Santoyo Castillo, Itzebelt; Sapp, Kevin; Sapronov, Andrey; Saraiva, João; Sarrazin, Bjorn; Sartisohn, Georg; Sasaki, Osamu; Sasaki, Yuichi; Sauvage, Gilles; Sauvan, Emmanuel; Savard, Pierre; Savu, Dan Octavian; Sawyer, Craig; Sawyer, Lee; Saxon, David; Saxon, James; Sbarra, Carla; Sbrizzi, Antonio; Scanlon, Tim; Scannicchio, Diana; Scarcella, Mark; Scarfone, Valerio; Schaarschmidt, Jana; Schacht, Peter; Schaefer, Douglas; Schaefer, Ralph; Schaepe, Steffen; Schaetzel, Sebastian; Schäfer, Uli; Schaffer, Arthur; Schaile, Dorothee; Schamberger, R. Dean; Scharf, Veit; Schegelsky, Valery; Scheirich, Daniel; Schernau, Michael; Scherzer, Max; Schiavi, Carlo; Schieck, Jochen; Schillo, Christian; Schioppa, Marco; Schlenker, Stefan; Schmidt, Evelyn; Schmieden, Kristof; Schmitt, Christian; Schmitt, Christopher; Schmitt, Sebastian; Schneider, Basil; Schnellbach, Yan Jie; Schnoor, Ulrike; Schoeffel, Laurent; Schoening, Andre; Schoenrock, Bradley Daniel; Schorlemmer, Andre Lukas; Schott, Matthias; Schouten, Doug; Schovancova, Jaroslava; Schramm, Steven; Schreyer, Manuel; Schroeder, Christian; Schuh, Natascha; Schultens, Martin Johannes; Schultz-Coulon, Hans-Christian; Schulz, Holger; Schumacher, Markus; Schumm, Bruce; Schune, Philippe; Schwanenberger, Christian; Schwartzman, Ariel; Schwegler, Philipp; Schwemling, Philippe; Schwienhorst, Reinhard; Schwindling, Jerome; Schwindt, Thomas; Schwoerer, Maud; Sciacca, Gianfranco; Scifo, Estelle; Sciolla, Gabriella; Scott, Bill; Scuri, Fabrizio; Scutti, Federico; Searcy, Jacob; Sedov, George; Sedykh, Evgeny; Seidel, Sally; Seiden, Abraham; Seifert, Frank; Seixas, José; Sekhniaidze, Givi; Sekula, Stephen; Selbach, Karoline Elfriede; Seliverstov, Dmitry; Sellers, Graham; Semprini-Cesari, Nicola; Serfon, Cedric; Serin, Laurent; Serkin, Leonid; Serre, Thomas; Seuster, Rolf; Severini, Horst; Sfiligoj, Tina; Sforza, Federico; Sfyrla, Anna; Shabalina, Elizaveta; Shamim, Mansoora; Shan, Lianyou; Shang, Ruo-yu; Shank, James; Shapiro, Marjorie; Shatalov, Pavel; Shaw, Kate; Shehu, Ciwake Yusufu; Sherwood, Peter; Shi, Liaoshan; Shimizu, Shima; Shimmin, Chase Owen; Shimojima, Makoto; Shiyakova, Mariya; Shmeleva, Alevtina; Shochet, Mel; Short, Daniel; Shrestha, Suyog; Shulga, Evgeny; Shupe, Michael; Shushkevich, Stanislav; Sicho, Petr; Sidiropoulou, Ourania; Sidorov, Dmitri; Sidoti, Antonio; Siegert, Frank; Sijacki, Djordje; Silva, José; Silver, Yiftah; Silverstein, Daniel; Silverstein, Samuel; Simak, Vladislav; Simard, Olivier; Simic, Ljiljana; Simion, Stefan; Simioni, Eduard; Simmons, Brinick; Simoniello, Rosa; Simonyan, Margar; Sinervo, Pekka; Sinev, Nikolai; Sipica, Valentin; Siragusa, Giovanni; Sircar, Anirvan; Sisakyan, Alexei; Sivoklokov, Serguei; Sjölin, Jörgen; Sjursen, Therese; Skottowe, Hugh Philip; Skovpen, Kirill; Skubic, Patrick; Slater, Mark; Slavicek, Tomas; Sliwa, Krzysztof; Smakhtin, Vladimir; Smart, Ben; Smestad, Lillian; Smirnov, Sergei; Smirnov, Yury; Smirnova, Lidia; Smirnova, Oxana; Smith, Kenway; Smizanska, Maria; Smolek, Karel; Snesarev, Andrei; Snidero, Giacomo; Snyder, Scott; Sobie, Randall; Socher, Felix; Soffer, Abner; Soh, Dart-yin; Solans, Carlos; Solar, Michael; Solc, Jaroslav; Soldatov, Evgeny; Soldevila, Urmila; Solodkov, Alexander; Soloshenko, Alexei; Solovyanov, Oleg; Solovyev, Victor; Sommer, Philip; Song, Hong Ye; Soni, Nitesh; Sood, Alexander; Sopczak, Andre; Sopko, Bruno; Sopko, Vit; Sorin, Veronica; Sosebee, Mark; Soualah, Rachik; Soueid, Paul; Soukharev, Andrey; South, David; Spagnolo, Stefania; Spanò, Francesco; Spearman, William Robert; Spettel, Fabian; Spighi, Roberto; Spigo, Giancarlo; Spousta, Martin; Spreitzer, Teresa; Spurlock, Barry; St Denis, Richard Dante; Staerz, Steffen; Stahlman, Jonathan; Stamen, Rainer; Stanecka, Ewa; Stanek, Robert; Stanescu, Cristian; Stanescu-Bellu, Madalina; Stanitzki, Marcel Michael; Stapnes, Steinar; Starchenko, Evgeny; Stark, Jan; Staroba, Pavel; Starovoitov, Pavel; Staszewski, Rafal; Stavina, Pavel; Steinberg, Peter; Stelzer, Bernd; Stelzer, Harald Joerg; Stelzer-Chilton, Oliver; Stenzel, Hasko; Stern, Sebastian; Stewart, Graeme; Stillings, Jan Andre; Stockton, Mark; Stoebe, Michael; Stoicea, Gabriel; Stolte, Philipp; Stonjek, Stefan; Stradling, Alden; Straessner, Arno; Stramaglia, Maria Elena; Strandberg, Jonas; Strandberg, Sara; Strandlie, Are; Strauss, Emanuel; Strauss, Michael; Strizenec, Pavol; Ströhmer, Raimund; Strom, David; Stroynowski, Ryszard; Stucci, Stefania Antonia; Stugu, Bjarne; Styles, Nicholas Adam; Su, Dong; Su, Jun; Subramaniam, Rajivalochan; Succurro, Antonella; Sugaya, Yorihito; Suhr, Chad; Suk, Michal; Sulin, Vladimir; Sultansoy, Saleh; Sumida, Toshi; Sun, Siyuan; Sun, Xiaohu; Sundermann, Jan Erik; Suruliz, Kerim; Susinno, Giancarlo; Sutton, Mark; Suzuki, Yu; Svatos, Michal; Swedish, Stephen; Swiatlowski, Maximilian; Sykora, Ivan; Sykora, Tomas; Ta, Duc; Taccini, Cecilia; Tackmann, Kerstin; Taenzer, Joe; Taffard, Anyes; Tafirout, Reda; Taiblum, Nimrod; Takai, Helio; Takashima, Ryuichi; Takeda, Hiroshi; Takeshita, Tohru; Takubo, Yosuke; Talby, Mossadek; Talyshev, Alexey; Tam, Jason; Tan, Kong Guan; Tanaka, Junichi; Tanaka, Reisaburo; Tanaka, Satoshi; Tanaka, Shuji; Tanasijczuk, Andres Jorge; Tannenwald, Benjamin Bordy; Tannoury, Nancy; Tapprogge, Stefan; Tarem, Shlomit; Tarrade, Fabien; Tartarelli, Giuseppe Francesco; Tas, Petr; Tasevsky, Marek; Tashiro, Takuya; Tassi, Enrico; Tavares Delgado, Ademar; Tayalati, Yahya; Taylor, Frank; Taylor, Geoffrey; Taylor, Wendy; Teischinger, Florian Alfred; Teixeira Dias Castanheira, Matilde; Teixeira-Dias, Pedro; Temming, Kim Katrin; Ten Kate, Herman; Teng, Ping-Kun; Teoh, Jia Jian; Terada, Susumu; Terashi, Koji; Terron, Juan; Terzo, Stefano; Testa, Marianna; Teuscher, Richard; Therhaag, Jan; Theveneaux-Pelzer, Timothée; Thomas, Juergen; Thomas-Wilsker, Joshuha; Thompson, Emily; Thompson, Paul; Thompson, Peter; Thompson, Stan; Thomsen, Lotte Ansgaard; Thomson, Evelyn; Thomson, Mark; Thong, Wai Meng; Thun, Rudolf; Tian, Feng; Tibbetts, Mark James; Tikhomirov, Vladimir; Tikhonov, Yury; Timoshenko, Sergey; Tiouchichine, Elodie; Tipton, Paul; Tisserant, Sylvain; Todorov, Theodore; Todorova-Nova, Sharka; Toggerson, Brokk; Tojo, Junji; Tokár, Stanislav; Tokushuku, Katsuo; Tollefson, Kirsten; Tomlinson, Lee; Tomoto, Makoto; Tompkins, Lauren; Toms, Konstantin; Topilin, Nikolai; Torrence, Eric; Torres, Heberth; Torró Pastor, Emma; Toth, Jozsef; Touchard, Francois; Tovey, Daniel; Tran, Huong Lan; Trefzger, Thomas; Tremblet, Louis; Tricoli, Alessandro; Trigger, Isabel Marian; Trincaz-Duvoid, Sophie; Tripiana, Martin; Trischuk, William; Trocmé, Benjamin; Troncon, Clara; Trottier-McDonald, Michel; Trovatelli, Monica; True, Patrick; Trzebinski, Maciej; Trzupek, Adam; Tsarouchas, Charilaos; Tseng, Jeffrey; Tsiareshka, Pavel; Tsionou, Dimitra; Tsipolitis, Georgios; Tsirintanis, Nikolaos; Tsiskaridze, Shota; Tsiskaridze, Vakhtang; Tskhadadze, Edisher; Tsukerman, Ilya; Tsulaia, Vakhtang; Tsuno, Soshi; Tsybychev, Dmitri; Tudorache, Alexandra; Tudorache, Valentina; Tuna, Alexander Naip; Tupputi, Salvatore; Turchikhin, Semen; Turecek, Daniel; Turk Cakir, Ilkay; Turra, Ruggero; Tuts, Michael; Tykhonov, Andrii; Tylmad, Maja; Tyndel, Mike; Uchida, Kirika; Ueda, Ikuo; Ueno, Ryuichi; Ughetto, Michael; Ugland, Maren; Uhlenbrock, Mathias; Ukegawa, Fumihiko; Unal, Guillaume; Undrus, Alexander; Unel, Gokhan; Ungaro, Francesca; Unno, Yoshinobu; Urbaniec, Dustin; Urquijo, Phillip; Usai, Giulio; Usanova, Anna; Vacavant, Laurent; Vacek, Vaclav; Vachon, Brigitte; Valencic, Nika; Valentinetti, Sara; Valero, Alberto; Valery, Loic; Valkar, Stefan; Valladolid Gallego, Eva; Vallecorsa, Sofia; Valls Ferrer, Juan Antonio; Van Den Wollenberg, Wouter; Van Der Deijl, Pieter; van der Geer, Rogier; van der Graaf, Harry; Van Der Leeuw, Robin; van der Ster, Daniel; van Eldik, Niels; van Gemmeren, Peter; Van Nieuwkoop, Jacobus; van Vulpen, Ivo; van Woerden, Marius Cornelis; Vanadia, Marco; Vandelli, Wainer; Vanguri, Rami; Vaniachine, Alexandre; Vankov, Peter; Vannucci, Francois; Vardanyan, Gagik; Vari, Riccardo; Varnes, Erich; Varol, Tulin; Varouchas, Dimitris; Vartapetian, Armen; Varvell, Kevin; Vazeille, Francois; Vazquez Schroeder, Tamara; Veatch, Jason; Veloso, Filipe; Veneziano, Stefano; Ventura, Andrea; Ventura, Daniel; Venturi, Manuela; Venturi, Nicola; Venturini, Alessio; Vercesi, Valerio; Verducci, Monica; Verkerke, Wouter; Vermeulen, Jos; Vest, Anja; Vetterli, Michel; Viazlo, Oleksandr; Vichou, Irene; Vickey, Trevor; Vickey Boeriu, Oana Elena; Viehhauser, Georg; Viel, Simon; Vigne, Ralph; Villa, Mauro; Villaplana Perez, Miguel; Vilucchi, Elisabetta; Vincter, Manuella; Vinogradov, Vladimir; Virzi, Joseph; Vivarelli, Iacopo; Vives Vaque, Francesc; Vlachos, Sotirios; Vladoiu, Dan; Vlasak, Michal; Vogel, Adrian; Vogel, Marcelo; Vokac, Petr; Volpi, Guido; Volpi, Matteo; von der Schmitt, Hans; von Radziewski, Holger; von Toerne, Eckhard; Vorobel, Vit; Vorobev, Konstantin; Vos, Marcel; Voss, Rudiger; Vossebeld, Joost; Vranjes, Nenad; Vranjes Milosavljevic, Marija; Vrba, Vaclav; Vreeswijk, Marcel; Vu Anh, Tuan; Vuillermet, Raphael; Vukotic, Ilija; Vykydal, Zdenek; Wagner, Peter; Wagner, Wolfgang; Wahlberg, Hernan; Wahrmund, Sebastian; Wakabayashi, Jun; Walder, James; Walker, Rodney; Walkowiak, Wolfgang; Wall, Richard; Waller, Peter; Walsh, Brian; Wang, Chao; Wang, Chiho; Wang, Fuquan; Wang, Haichen; Wang, Hulin; Wang, Jike; Wang, Jin; Wang, Kuhan; Wang, Rui; Wang, Song-Ming; Wang, Tan; Wang, Xiaoxiao; Wanotayaroj, Chaowaroj; Warburton, Andreas; Ward, Patricia; Wardrope, David Robert; Warsinsky, Markus; Washbrook, Andrew; Wasicki, Christoph; Watkins, Peter; Watson, Alan; Watson, Ian; Watson, Miriam; Watts, Gordon; Watts, Stephen; Waugh, Ben; Webb, Samuel; Weber, Michele; Weber, Stefan Wolf; Webster, Jordan S; Weidberg, Anthony; Weigell, Philipp; Weinert, Benjamin; Weingarten, Jens; Weiser, Christian; Weits, Hartger; Wells, Phillippa; Wenaus, Torre; Wendland, Dennis; Weng, Zhili; Wengler, Thorsten; Wenig, Siegfried; Wermes, Norbert; Werner, Matthias; Werner, Per; Wessels, Martin; Wetter, Jeffrey; Whalen, Kathleen; White, Andrew; White, Martin; White, Ryan; White, Sebastian; Whiteson, Daniel; Wicke, Daniel; Wickens, Fred; Wiedenmann, Werner; Wielers, Monika; Wienemann, Peter; Wiglesworth, Craig; Wiik-Fuchs, Liv Antje Mari; Wijeratne, Peter Alexander; Wildauer, Andreas; Wildt, Martin Andre; Wilkens, Henric George; Will, Jonas Zacharias; Williams, Hugh; Williams, Sarah; Willis, Christopher; Willocq, Stephane; Wilson, Alan; Wilson, John; Wingerter-Seez, Isabelle; Winklmeier, Frank; Winter, Benedict Tobias; Wittgen, Matthias; Wittig, Tobias; Wittkowski, Josephine; Wollstadt, Simon Jakob; Wolter, Marcin Wladyslaw; Wolters, Helmut; Wosiek, Barbara; Wotschack, Jorg; Woudstra, Martin; Wozniak, Krzysztof; Wright, Michael; Wu, Mengqing; Wu, Sau Lan; Wu, Xin; Wu, Yusheng; Wulf, Evan; Wyatt, Terry Richard; Wynne, Benjamin; Xella, Stefania; Xiao, Meng; Xu, Da; Xu, Lailin; Yabsley, Bruce; Yacoob, Sahal; Yakabe, Ryota; Yamada, Miho; Yamaguchi, Hiroshi; Yamaguchi, Yohei; Yamamoto, Akira; Yamamoto, Kyoko; Yamamoto, Shimpei; Yamamura, Taiki; Yamanaka, Takashi; Yamauchi, Katsuya; Yamazaki, Yuji; Yan, Zhen; Yang, Haijun; Yang, Hongtao; Yang, Un-Ki; Yang, Yi; Yanush, Serguei; Yao, Liwen; Yao, Weiming; Yasu, Yoshiji; Yatsenko, Elena; Yau Wong, Kaven Henry; Ye, Jingbo; Ye, Shuwei; Yen, Andy L; Yildirim, Eda; Yilmaz, Metin; Yoosoofmiya, Reza; Yorita, Kohei; Yoshida, Rikutaro; Yoshihara, Keisuke; Young, Charles; Young, Christopher John; Youssef, Saul; Yu, David Ren-Hwa; Yu, Jaehoon; Yu, Jiaming; Yu, Jie; Yuan, Li; Yurkewicz, Adam; Yusuff, Imran; Zabinski, Bartlomiej; Zaidan, Remi; Zaitsev, Alexander; Zaman, Aungshuman; Zambito, Stefano; Zanello, Lucia; Zanzi, Daniele; Zeitnitz, Christian; Zeman, Martin; Zemla, Andrzej; Zengel, Keith; Zenin, Oleg; Ženiš, Tibor; Zerwas, Dirk; Zevi della Porta, Giovanni; Zhang, Dongliang; Zhang, Fangzhou; Zhang, Huaqiao; Zhang, Jinlong; Zhang, Lei; Zhang, Xueyao; Zhang, Zhiqing; Zhao, Zhengguo; Zhemchugov, Alexey; Zhong, Jiahang; Zhou, Bing; Zhou, Lei; Zhou, Ning; Zhu, Cheng Guang; Zhu, Hongbo; Zhu, Junjie; Zhu, Yingchun; Zhuang, Xuai; Zhukov, Konstantin; Zibell, Andre; Zieminska, Daria; Zimine, Nikolai; Zimmermann, Christoph; Zimmermann, Robert; Zimmermann, Simone; Zimmermann, Stephanie; Zinonos, Zinonas; Ziolkowski, Michael; Zobernig, Georg; Zoccoli, Antonio; zur Nedden, Martin; Zurzolo, Giovanni; Zutshi, Vishnu; Zwalinski, Lukasz

    2014-01-01

    The inclusive top quark pair ($t\\bar{t}$) production cross-section $\\sigma_{t\\bar{t}}$ has been measured in proton-proton collisions at $\\sqrt{s}=7$ TeV and $\\sqrt{s}=8$ TeV with the ATLAS experiment at the LHC, using $t\\bar{t}$ events with an opposite-charge $e\\mu$ pair in the final state. The measurement was performed with the 2011 7 TeV dataset corresponding to an integrated luminosity of 4.6 fb$^{-1}$ and the 2012 8 TeV dataset of 20.3 fb$^{-1}$. The numbers of events with exactly one and exactly two $b$-tagged jets were counted and used to simultaneously determine $\\sigma_{t\\bar{t}}$ and the efficiency to reconstruct and $b$-tag a $b$-jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section was measured to be: $\\sigma_{t\\bar{t}}=182.9\\pm 3.1\\pm 4.2\\pm 3.6 \\pm 3.3$ pb ($\\sqrt{s}=7$ TeV) and $\\sigma_{t\\bar{t}}=242.4\\pm 1.7\\pm 5.5\\pm 7.5\\pm 4.2$ pb ($\\sqrt{s}=8$ TeV), where the four uncertianties arise from data statistics, experimental and theoretical system...

  8. Advanced LIGO

    CERN Document Server

    ,

    2014-01-01

    The Advanced LIGO gravitational wave detectors are second generation instruments designed and built for the two LIGO observatories in Hanford, WA and Livingston, LA. The two instruments are identical in design, and are specialized versions of a Michelson interferometer with 4 km long arms. As in initial LIGO, Fabry-Perot cavities are used in the arms to increase the interaction time with a gravitational wave, and power recycling is used to increase the effective laser power. Signal recycling has been added in Advanced LIGO to improve the frequency response. In the most sensitive frequency region around 100 Hz, the design strain sensitivity is a factor of 10 better than initial LIGO. In addition, the low frequency end of the sensitivity band is moved from 40 Hz down to 10 Hz. All interferometer components have been replaced with improved technologies to achieve this sensitivity gain. Much better seismic isolation and test mass suspensions are responsible for the gains at lower frequencies. Higher laser power, ...

  9. Advanced LIGO

    Science.gov (United States)

    LIGO Scientific Collaboration; Aasi, J.; Abbott, B. P.; Abbott, R.; Abbott, T.; Abernathy, M. R.; Ackley, K.; Adams, C.; Adams, T.; Addesso, P.; Adhikari, R. X.; Adya, V.; Affeldt, C.; Aggarwal, N.; Aguiar, O. D.; Ain, A.; Ajith, P.; Alemic, A.; Allen, B.; Amariutei, D.; Anderson, S. B.; Anderson, W. G.; Arai, K.; Araya, M. C.; Arceneaux, C.; Areeda, J. S.; Ashton, G.; Ast, S.; Aston, S. M.; Aufmuth, P.; Aulbert, C.; Aylott, B. E.; Babak, S.; Baker, P. T.; Ballmer, S. W.; Barayoga, J. C.; Barbet, M.; Barclay, S.; Barish, B. C.; Barker, D.; Barr, B.; Barsotti, L.; Bartlett, J.; Barton, M. A.; Bartos, I.; Bassiri, R.; Batch, J. C.; Baune, C.; Behnke, B.; Bell, A. S.; Bell, C.; Benacquista, M.; Bergman, J.; Bergmann, G.; Berry, C. P. L.; Betzwieser, J.; Bhagwat, S.; Bhandare, R.; Bilenko, I. A.; Billingsley, G.; Birch, J.; Biscans, S.; Biwer, C.; Blackburn, J. K.; Blackburn, L.; Blair, C. D.; Blair, D.; Bock, O.; Bodiya, T. P.; Bojtos, P.; Bond, C.; Bork, R.; Born, M.; Bose, Sukanta; Brady, P. R.; Braginsky, V. B.; Brau, J. E.; Bridges, D. O.; Brinkmann, M.; Brooks, A. F.; Brown, D. A.; Brown, D. D.; Brown, N. M.; Buchman, S.; Buikema, A.; Buonanno, A.; Cadonati, L.; Calderón Bustillo, J.; Camp, J. B.; Cannon, K. C.; Cao, J.; Capano, C. D.; Caride, S.; Caudill, S.; Cavaglià, M.; Cepeda, C.; Chakraborty, R.; Chalermsongsak, T.; Chamberlin, S. J.; Chao, S.; Charlton, P.; Chen, Y.; Cho, H. S.; Cho, M.; Chow, J. H.; Christensen, N.; Chu, Q.; Chung, S.; Ciani, G.; Clara, F.; Clark, J. A.; Collette, C.; Cominsky, L.; Constancio, M., Jr.; Cook, D.; Corbitt, T. R.; Cornish, N.; Corsi, A.; Costa, C. A.; Coughlin, M. W.; Countryman, S.; Couvares, P.; Coward, D. M.; Cowart, M. J.; Coyne, D. C.; Coyne, R.; Craig, K.; Creighton, J. D. E.; Creighton, T. D.; Cripe, J.; Crowder, S. G.; Cumming, A.; Cunningham, L.; Cutler, C.; Dahl, K.; Dal Canton, T.; Damjanic, M.; Danilishin, S. L.; Danzmann, K.; Dartez, L.; Dave, I.; Daveloza, H.; Davies, G. S.; Daw, E. J.; DeBra, D.; Del Pozzo, W.; Denker, T.; Dent, T.; Dergachev, V.; DeRosa, R. T.; DeSalvo, R.; Dhurandhar, S.; D´ıaz, M.; Di Palma, I.; Dojcinoski, G.; Dominguez, E.; Donovan, F.; Dooley, K. L.; Doravari, S.; Douglas, R.; Downes, T. P.; Driggers, J. C.; Du, Z.; Dwyer, S.; Eberle, T.; Edo, T.; Edwards, M.; Edwards, M.; Effler, A.; Eggenstein, H.-B.; Ehrens, P.; Eichholz, J.; Eikenberry, S. S.; Essick, R.; Etzel, T.; Evans, M.; Evans, T.; Factourovich, M.; Fairhurst, S.; Fan, X.; Fang, Q.; Farr, B.; Farr, W. M.; Favata, M.; Fays, M.; Fehrmann, H.; Fejer, M. M.; Feldbaum, D.; Ferreira, E. C.; Fisher, R. P.; Frei, Z.; Freise, A.; Frey, R.; Fricke, T. T.; Fritschel, P.; Frolov, V. V.; Fuentes-Tapia, S.; Fulda, P.; Fyffe, M.; Gair, J. R.; Gaonkar, S.; Gehrels, N.; Gergely, L. Á.; Giaime, J. A.; Giardina, K. D.; Gleason, J.; Goetz, E.; Goetz, R.; Gondan, L.; González, G.; Gordon, N.; Gorodetsky, M. L.; Gossan, S.; Goßler, S.; Gräf, C.; Graff, P. B.; Grant, A.; Gras, S.; Gray, C.; Greenhalgh, R. J. S.; Gretarsson, A. M.; Grote, H.; Grunewald, S.; Guido, C. J.; Guo, X.; Gushwa, K.; Gustafson, E. K.; Gustafson, R.; Hacker, J.; Hall, E. D.; Hammond, G.; Hanke, M.; Hanks, J.; Hanna, C.; Hannam, M. D.; Hanson, J.; Hardwick, T.; Harry, G. M.; Harry, I. W.; Hart, M.; Hartman, M. T.; Haster, C.-J.; Haughian, K.; Hee, S.; Heintze, M.; Heinzel, G.; Hendry, M.; Heng, I. S.; Heptonstall, A. W.; Heurs, M.; Hewitson, M.; Hild, S.; Hoak, D.; Hodge, K. A.; Hollitt, S. E.; Holt, K.; Hopkins, P.; Hosken, D. J.; Hough, J.; Houston, E.; Howell, E. J.; Hu, Y. M.; Huerta, E.; Hughey, B.; Husa, S.; Huttner, S. H.; Huynh, M.; Huynh-Dinh, T.; Idrisy, A.; Indik, N.; Ingram, D. R.; Inta, R.; Islas, G.; Isler, J. C.; Isogai, T.; Iyer, B. R.; Izumi, K.; Jacobson, M.; Jang, H.; Jawahar, S.; Ji, Y.; Jiménez-Forteza, F.; Johnson, W. W.; Jones, D. I.; Jones, R.; Ju, L.; Haris, K.; Kalogera, V.; Kandhasamy, S.; Kang, G.; Kanner, J. B.; Katsavounidis, E.; Katzman, W.; Kaufer, H.; Kaufer, S.; Kaur, T.; Kawabe, K.; Kawazoe, F.; Keiser, G. M.; Keitel, D.; Kelley, D. B.; Kells, W.; Keppel, D. G.; Key, J. S.; Khalaidovski, A.; Khalili, F. Y.; Khazanov, E. A.; Kim, C.; Kim, K.; Kim, N. G.; Kim, N.; Kim, Y.-M.; King, E. J.; King, P. J.; Kinzel, D. L.; Kissel, J. S.; Klimenko, S.; Kline, J.; Koehlenbeck, S.; Kokeyama, K.; Kondrashov, V.; Korobko, M.; Korth, W. Z.; Kozak, D. B.; Kringel, V.; Krishnan, B.; Krueger, C.; Kuehn, G.; Kumar, A.; Kumar, P.; Kuo, L.; Landry, M.; Lantz, B.; Larson, S.; Lasky, P. D.; Lazzarini, A.; Lazzaro, C.; Le, J.; Leaci, P.; Leavey, S.; Lebigot, E. O.; Lee, C. H.; Lee, H. K.; Lee, H. M.; Leong, J. R.; Levin, Y.; Levine, B.; Lewis, J.; Li, T. G. F.; Libbrecht, K.; Libson, A.; Lin, A. C.; Littenberg, T. B.; Lockerbie, N. A.; Lockett, V.; Logue, J.; Lombardi, A. L.; Lormand, M.; Lough, J.; Lubinski, M. J.

    2015-04-01

    The Advanced LIGO gravitational wave detectors are second-generation instruments designed and built for the two LIGO observatories in Hanford, WA and Livingston, LA, USA. The two instruments are identical in design, and are specialized versions of a Michelson interferometer with 4 km long arms. As in Initial LIGO, Fabry-Perot cavities are used in the arms to increase the interaction time with a gravitational wave, and power recycling is used to increase the effective laser power. Signal recycling has been added in Advanced LIGO to improve the frequency response. In the most sensitive frequency region around 100 Hz, the design strain sensitivity is a factor of 10 better than Initial LIGO. In addition, the low frequency end of the sensitivity band is moved from 40 Hz down to 10 Hz. All interferometer components have been replaced with improved technologies to achieve this sensitivity gain. Much better seismic isolation and test mass suspensions are responsible for the gains at lower frequencies. Higher laser power, larger test masses and improved mirror coatings lead to the improved sensitivity at mid and high frequencies. Data collecting runs with these new instruments are planned to begin in mid-2015.

  10. Turnley Unit

    Data.gov (United States)

    Federal Laboratory Consortium — Facilities at this unit include cattle working pens, hydraulic squeeze chute and electronic scale, a maintenance building, and four hay storage sheds. There is one...

  11. Operable Units

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset consists of operable unit data from multiple Superfund sites in U.S. EPA Region 8. These data were acquired from multiple sources at different times and...

  12. Detector Unit

    CERN Multimedia

    1960-01-01

    Original detector unit of the Instituut voor Kernfysisch Onderzoek (IKO) BOL project. This detector unit shows that silicon detectors for nuclear physics particle detection were already developed and in use in the 1960's in Amsterdam. Also the idea of putting 'strips' onto the silicon for high spatial resolution of a particle's impact on the detector were implemented in the BOL project which used 64 of these detector units. The IKO BOL project with its silicon particle detectors was designed, built and operated from 1965 to roughly 1977. Detector Unit of the BOL project: These detectors, notably the ‘checkerboard detector’, were developed during the years 1964-1968 in Amsterdam, The Netherlands, by the Natuurkundig Laboratorium of the N.V. Philips Gloeilampen Fabrieken. This was done in close collaboration with the Instituut voor Kernfysisch Onderzoek (IKO) where the read-out electronics for their use in the BOL Project was developed and produced.

  13. Prosthetic advances.

    Science.gov (United States)

    Harvey, Zach T; Potter, Benjamin K; Vandersea, James; Wolf, Erik

    2012-01-01

    Much of the current prosthetic technology is based on developments that have taken place during or directly following times of war. These developments have evolved and improved over the years, and now there are many more available options to provide a comfortable, cosmetic, and highly functional prosthesis. Even so, problems with fit and function persist. Recent developments have addressed some of the limitations faced by some military amputees. On-board microprocessor-controlled joints are making prosthetic arms and legs more responsive to environmental barriers and easier to control by the user. Advances in surgical techniques will allow more intuitive control and secure attachment to the prosthesis. As surgical techniques progress and permeate into standard practice, more sophisticated powered prosthetic devices will become commonplace, helping to restore neuromuscular loss of function. Prognoses following amputation will certainly rise, factoring into the surgeon's decision to attempt to save a limb versus perform an amputation.

  14. Advanced capacitors

    Science.gov (United States)

    Ennis, J. B.; Buritz, R. S.

    1984-10-01

    This report describes an experimental program to develop and test advanced dielectric materials for capacitors for airborne power systems. Five classes of capacitors were considered: high rep rate and low rep rate pulse capacitors for use in pulse-forming networks, high voltage filter capacitors, high frequency AC capacitors for series resonant inverters, and AC filter capacitors. To meet these requirements, existing dielectric materials were modified, and new materials were developed. The initial goal was to develop an improved polysulfone film with fewer imperfections that could operate at significantly higher electrical stresses. It was shown that contaminants enter the film via the resin and solvent, and that they can be partially removed. As far as developed, however, these treatments did not significantly improved the breakdown characteristics. The technique of casting films on a roughened drum was demonstrated, and found useful in preparing textured films -- the first step toward a replacement for Kraft paper. A new material, Ultem, was proposed for use in high energy density capacitors. This new polyetherimide resin has properties similar to polysulfone and polyimide, with improvement in breakdown characteristics and temperature capability. This material was selected for further study in model capacitor designs.

  15. Features of survived casualties and treatment after " July 23" EMU railway accident at Wenzhou station%“7·23"温州动车事故存活伤员损伤特点及救治分析

    Institute of Scientific and Technical Information of China (English)

    闻浩; 林露阳; 陈大庆; 吴钒; 朱烈烈

    2011-01-01

    目的 分析“7·23”温州动车追尾事故存活伤员的损伤特点,探讨并分析事故初期伤员的救治策略.方法 以事故后24h温州市各大医院救治的事故伤员为对象,收集伤员的年龄、性别、致伤部位、损伤严重程度等信息并应用创伤评分系统3.0进行分析.结果 事故发生后24h温州市各大医院共收治伤员136例,年龄在2.5 ~69岁之间,男性占55.89%,女性占44.11%;主要以钝器致伤为主;存活伤员中多发伤占79.41%,实质性受伤部位以胸部为第1位、其次是四肢和脊柱;所有伤员均现场急救后直接送至就近医院.结论 直接外力及惯性、离心力引起的钝器伤是存活伤员主要的致伤原因,胸部、四肢及脊柱为主要的受伤部位,对事故伤员救治初期的治疗以抢救生命、分诊和后送为主.%Objective To analyze the features of EMU survived casualties and the rescue during a head -on- rear collision between two EMU trains on 23 July 2011 (" July 23" train collision accident) at Wenzhou station.Methods The casualties treated in many major hospitals in Wenzhou were surveyed within 24 hours after the accident occurred.The data of age,gender,type of injury and injury severity of the wounded were analyzed.Results A total of 136 casualties were treated within the first 24 hours after the accident occurred,and the male patients and female patients accounted for 55.89% and 44.11% respectively,blunt trauma was the main cause of injuries.The percent of multiple injuries in the wounded survivals accounted for 79.41%.The most common injury site of the survived casualties was chest,followed by four limbs and spine.All the wounded were rescued on the spot and were referred to the hospitals with better medical facilities.Conclusions There was no significant difference in gender of the wounded.Blunt trauma was the leading cause of injuries,and the chest,four limbs and spine were the liable parts of body to be

  16. 14 CFR 151.125 - Allowable advance planning costs.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Allowable advance planning costs. 151.125... (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Rules and Procedures for Advance Planning and Engineering Proposals § 151.125 Allowable advance planning costs. (a) The United States' share of the allowable costs of...

  17. Advanced Space Suit Portable Life Support Subsystem Packaging Design

    Science.gov (United States)

    Howe, Robert; Diep, Chuong; Barnett, Bob; Thomas, Gretchen; Rouen, Michael; Kobus, Jack

    2006-01-01

    This paper discusses the Portable Life Support Subsystem (PLSS) packaging design work done by the NASA and Hamilton Sundstrand in support of the 3 future space missions; Lunar, Mars and zero-g. The goal is to seek ways to reduce the weight of PLSS packaging, and at the same time, develop a packaging scheme that would make PLSS technology changes less costly than the current packaging methods. This study builds on the results of NASA s in-house 1998 study, which resulted in the "Flex PLSS" concept. For this study the present EMU schematic (low earth orbit) was used so that the work team could concentrate on the packaging. The Flex PLSS packaging is required to: protect, connect, and hold the PLSS and its components together internally and externally while providing access to PLSS components internally for maintenance and for technology change without extensive redesign impact. The goal of this study was two fold: 1. Bring the advanced space suit integrated Flex PLSS concept from its current state of development to a preliminary design level and build a proof of concept mockup of the proposed design, and; 2. "Design" a Design Process, which accommodates both the initial Flex PLSS design and the package modifications, required to accommodate new technology.

  18. Exposure to electromagnetic fields aboard high-speed electric multiple unit trains.

    Science.gov (United States)

    Niu, D; Zhu, F; Qiu, R; Niu, Q

    2016-01-01

    High-speed electric multiple unit (EMU) trains generate high-frequency electric fields, low-frequency magnetic fields, and high-frequency wideband electromagnetic emissions when running. Potential human health concerns arise because the electromagnetic disturbances are transmitted mainly into the car body from windows, and from there to passengers and train staff. The transmission amount and amplitude distribution characteristics that dominate electromagnetic field emission need to be studied, and the exposure level of electromagnetic field emission to humans should be measured. We conducted a series of tests of the on board electromagnetic field distribution on several high-speed railway lines. While results showed that exposure was within permitted levels, the possibility of long-term health effects should be investigated.

  19. Optimizing the Shunting Schedule of Electric Multiple Units Depot Using an Enhanced Particle Swarm Optimization Algorithm

    Science.gov (United States)

    Jin, Junchen

    2016-01-01

    The shunting schedule of electric multiple units depot (SSED) is one of the essential plans for high-speed train maintenance activities. This paper presents a 0-1 programming model to address the problem of determining an optimal SSED through automatic computing. The objective of the model is to minimize the number of shunting movements and the constraints include track occupation conflicts, shunting routes conflicts, time durations of maintenance processes, and shunting running time. An enhanced particle swarm optimization (EPSO) algorithm is proposed to solve the optimization problem. Finally, an empirical study from Shanghai South EMU Depot is carried out to illustrate the model and EPSO algorithm. The optimization results indicate that the proposed method is valid for the SSED problem and that the EPSO algorithm outperforms the traditional PSO algorithm on the aspect of optimality. PMID:27436998

  20. Integration issues of a plasma contactor Power Electronics Unit

    Science.gov (United States)

    Pinero, Luis R.; York, Kenneth W.; Bowers, Glen E.

    1995-06-01

    A hollow cathode-based plasma contactor is baselined on International Space Station Alpha (ISSA) for spacecraft charge control. The plasma contactor system consists of a hollow cathode assembly (HCA), a power electronics unit (PEU), and an expellant management unit (EMU). The plasma contactor has recently been required to operate in a cyclic mode to conserve xenon expellant and extend system life. Originally, a DC cathode heater converter was baselined for a continuous operation mode because only a few ignitions of the hollow cathode were expected. However, for cyclic operation, a DC heater supply can potentially result in hollow cathode heater component failure due to the DC electrostatic field. This can prevent the heater from attaining the proper cathode tip temperature for reliable ignition of the hollow cathode. To mitigate this problem, an AC cathode heater supply was therefore designed, fabricated, and installed into a modified PEU. The PEU was tested using resistive loads and then integrated with an engineering model hollow cathode to demonstrate stable steady-state operation. Integration issues such as the effect of line and load impedance on the output of the AC cathode heater supply and the characterization of the temperature profile of the heater under AC excitation were investigated.

  1. Integration issues of a plasma contactor Power Electronics Unit

    Science.gov (United States)

    Pinero, Luis R.; York, Kenneth W.; Bowers, Glen E.

    1995-01-01

    A hollow cathode-based plasma contactor is baselined on International Space Station Alpha (ISSA) for spacecraft charge control. The plasma contactor system consists of a hollow cathode assembly (HCA), a power electronics unit (PEU), and an expellant management unit (EMU). The plasma contactor has recently been required to operate in a cyclic mode to conserve xenon expellant and extend system life. Originally, a DC cathode heater converter was baselined for a continuous operation mode because only a few ignitions of the hollow cathode were expected. However, for cyclic operation, a DC heater supply can potentially result in hollow cathode heater component failure due to the DC electrostatic field. This can prevent the heater from attaining the proper cathode tip temperature for reliable ignition of the hollow cathode. To mitigate this problem, an AC cathode heater supply was therefore designed, fabricated, and installed into a modified PEU. The PEU was tested using resistive loads and then integrated with an engineering model hollow cathode to demonstrate stable steady-state operation. Integration issues such as the effect of line and load impedance on the output of the AC cathode heater supply and the characterization of the temperature profile of the heater under AC excitation were investigated.

  2. UNITE 2010

    Science.gov (United States)

    2010-01-01

    Computer Applications, Trigonometry , Physics, and College Writing were taught by University faculty and were structured after a real course at the...for nearly 20 years, challenging students to enhance their academic skills through advanced course work, providing a summer experience opportunity to...University, providing students the opportunity to earn class credits. These courses are enriched by the addition of hands-on activities and projects

  3. 空调室外机气动与声学特性的研究进展%Advances in Investigation of Acoustic and Aerodynamic Noise in Air Conditioner Outdoor Unit

    Institute of Scientific and Technical Information of China (English)

    杨启容; 秦静静; 吴荣华; 王硕

    2015-01-01

    Noise in air conditioner outdoor unit includes mechanical noise,electromagnetic noise and aerodynamic noise.The effects of mechanic and electromagnetic noise are minor but aerodynamic noise effect is the key in the duct system of air condi-tioner outdoor unit.The history and u-to-date development of noise in air conditioner outdoor unit were reviewed,The detail analy-sis is carried out from three ways of methods of numerical modeling,experimental studies and modal analysis according to refer-ences.On the basis of the analysis and summary,the further needed work of noise reduction are put forward.%空调室外机噪声包括机械噪声、电磁噪声和气动噪声,其中机械噪声和电磁噪声在常规状态下影响较小,气动噪声是空调室外机风道系统的主要噪声。本文回顾了国内外关于空调室外机气动噪音的研究历史与现状,结合文献着重从数值模拟、试验研究以及模态分析几个方面进行了分析。经过分析总结,提出了进一步降噪需要开展的工作。

  4. [Conservation Units.

    Science.gov (United States)

    Texas Education Agency, Austin.

    Each of the six instructional units deals with one aspect of conservation: forests, water, rangeland, minerals (petroleum), and soil. The area of the elementary school curriculum with which each correlates is indicated. Lists of general and specific objectives are followed by suggested teaching procedures, including ideas for introducing the…

  5. [Conservation Units.

    Science.gov (United States)

    Texas Education Agency, Austin.

    Instructional units deal with each aspect of conservation: forests, wildlife, rangelands, water, minerals, and soil. The area of the secondary school curriculum with which each is correlated is indicated. Lists of general and specific objectives are followed by suggested teaching procedures, including ideas for introducing the topic, questions to…

  6. SPOKEN COCHABAMBA QUECHUA, UNITS 13-24.

    Science.gov (United States)

    LASTRA, YOLANDA; SOLA, DONALD F.

    UNITS 13-24 OF THE SPOKEN COCHABAMBA QUECHUA COURSE FOLLOW THE GENERAL FORMAT OF THE FIRST VOLUME (UNITS 1-12). THIS SECOND VOLUME IS INTENDED FOR USE IN AN INTERMEDIATE OR ADVANCED COURSE AND INCLUDES MORE COMPLEX DIALOGS, CONVERSATIONS, "LISTENING-INS," AND DICTATIONS, AS WELL AS GRAMMAR AND EXERCISE SECTIONS COVERING ADDITIONAL…

  7. SPOKEN COCHABAMBA QUECHUA, UNITS 13-24.

    Science.gov (United States)

    LASTRA, YOLANDA; SOLA, DONALD F.

    UNITS 13-24 OF THE SPOKEN COCHABAMBA QUECHUA COURSE FOLLOW THE GENERAL FORMAT OF THE FIRST VOLUME (UNITS 1-12). THIS SECOND VOLUME IS INTENDED FOR USE IN AN INTERMEDIATE OR ADVANCED COURSE AND INCLUDES MORE COMPLEX DIALOGS, CONVERSATIONS, "LISTENING-INS," AND DICTATIONS, AS WELL AS GRAMMAR AND EXERCISE SECTIONS COVERING ADDITIONAL…

  8. SPOKEN COCHABAMBA QUECHUA, UNITS 13-24.

    Science.gov (United States)

    LASTRA, YOLANDA; SOLA, DONALD F.

    UNITS 13-24 OF THE SPOKEN COCHABAMBA QUECHUA COURSE FOLLOW THE GENERAL FORMAT OF THE FIRST VOLUME (UNITS 1-12). THIS SECOND VOLUME IS INTENDED FOR USE IN AN INTERMEDIATE OR ADVANCED COURSE AND INCLUDES MORE COMPLEX DIALOGS, CONVERSATIONS, "LISTENING-INS," AND DICTATIONS, AS WELL AS GRAMMAR AND EXERCISE SECTIONS COVERING ADDITIONAL GRAMMATICAL…

  9. Advanced Stirling Convertor Update

    Science.gov (United States)

    Wood, J. Gary; Carroll, Cliff; Matejczyk, Dan; Penswick, L. B.; Soendker, E.

    2006-01-01

    This paper reports on the 88 We Advanced Stirling Convertor (ASC) currently being developed under Phase II of a NASA NRA program for possible use in advanced high specific power radioisotope space power systems. An early developmental unit, the Frequency Test Bed (FTB) which was built and tested in Phase I demonstrated 36% efficiency. The ASC-1 currently being developed under Phase II, uses a high temperature heater head to allow for operation at 850 °C and is expected to have an efficiency approaching 40% (based on AC electrical out) at a temperature ratio of 3.1. The final lightweight ASC-2 convertor to be developed in Phase III is expected to have a mass of approximately 1 kg. The implementation of the ASC would allow for much higher specific power radioisotope power systems, requiring significantly less radioisotope fuel than current systems. The first run of the ASC-1 occurred in September 2005, and full temperature operation was achieved in early October 2005. Presented is an update on progress on the ASC program as well as the plans for future development. Also presented are efforts being performed to ensure the ASC has the required long life already demonstrated in free-piston Stirling cryocoolers.

  10. ADVANCED SULFUR CONTROL CONCEPTS

    Energy Technology Data Exchange (ETDEWEB)

    Apostolos A. Nikolopoulos; Santosh K. Gangwal; William J. McMichael; Jeffrey W. Portzer

    2003-01-01

    Conventional sulfur removal in integrated gasification combined cycle (IGCC) power plants involves numerous steps: COS (carbonyl sulfide) hydrolysis, amine scrubbing/regeneration, Claus process, and tail-gas treatment. Advanced sulfur removal in IGCC systems involves typically the use of zinc oxide-based sorbents. The sulfides sorbent is regenerated using dilute air to produce a dilute SO{sub 2} (sulfur dioxide) tail gas. Under previous contracts the highly effective first generation Direct Sulfur Recovery Process (DSRP) for catalytic reduction of this SO{sub 2} tail gas to elemental sulfur was developed. This process is currently undergoing field-testing. In this project, advanced concepts were evaluated to reduce the number of unit operations in sulfur removal and recovery. Substantial effort was directed towards developing sorbents that could be directly regenerated to elemental sulfur in an Advanced Hot Gas Process (AHGP). Development of this process has been described in detail in Appendices A-F. RTI began the development of the Single-step Sulfur Recovery Process (SSRP) to eliminate the use of sorbents and multiple reactors in sulfur removal and recovery. This process showed promising preliminary results and thus further process development of AHGP was abandoned in favor of SSRP. The SSRP is a direct Claus process that consists of injecting SO{sub 2} directly into the quenched coal gas from a coal gasifier, and reacting the H{sub 2}S-SO{sub 2} mixture over a selective catalyst to both remove and recover sulfur in a single step. The process is conducted at gasifier pressure and 125 to 160 C. The proposed commercial embodiment of the SSRP involves a liquid phase of molten sulfur with dispersed catalyst in a slurry bubble-column reactor (SBCR).

  11. Advanced satellite communication system

    Science.gov (United States)

    Staples, Edward J.; Lie, Sen

    1992-01-01

    The objective of this research program was to develop an innovative advanced satellite receiver/demodulator utilizing surface acoustic wave (SAW) chirp transform processor and coherent BPSK demodulation. The algorithm of this SAW chirp Fourier transformer is of the Convolve - Multiply - Convolve (CMC) type, utilizing off-the-shelf reflective array compressor (RAC) chirp filters. This satellite receiver, if fully developed, was intended to be used as an on-board multichannel communications repeater. The Advanced Communications Receiver consists of four units: (1) CMC processor, (2) single sideband modulator, (3) demodulator, and (4) chirp waveform generator and individual channel processors. The input signal is composed of multiple user transmission frequencies operating independently from remotely located ground terminals. This signal is Fourier transformed by the CMC Processor into a unique time slot for each user frequency. The CMC processor is driven by a waveform generator through a single sideband (SSB) modulator. The output of the coherent demodulator is composed of positive and negative pulses, which are the envelopes of the chirp transform processor output. These pulses correspond to the data symbols. Following the demodulator, a logic circuit reconstructs the pulses into data, which are subsequently differentially decoded to form the transmitted data. The coherent demodulation and detection of BPSK signals derived from a CMC chirp transform processor were experimentally demonstrated and bit error rate (BER) testing was performed. To assess the feasibility of such advanced receiver, the results were compared with the theoretical analysis and plotted for an average BER as a function of signal-to-noise ratio. Another goal of this SBIR program was the development of a commercial product. The commercial product developed was an arbitrary waveform generator. The successful sales have begun with the delivery of the first arbitrary waveform generator.

  12. FLYING UNITED

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Apart from selling hundreds of airplanes to China, Boeing buys locally made aircraft parts and transfers technology, in the true spirit of partnership Whenever Boeing's senior manager hear of a visit by one of China's state leaders, it's no doubt cause for celebration. Since China and the United States established diplomatic ties in 1978, every official trip by China's top statesmen has included a meeting with Boeing that

  13. Z' to tau tau - emu final state

    CERN Document Server

    CMS Collaboration

    2015-01-01

    A search for new physics beyond the standard model in the high-mass ditau final state with one tau decaying in the electron channel and one tau decaying in the muon channel is performed using proton-proton collisions at $\\sqrt{s}$ = 8 TeV recorded by the CMS experiment at the LHC. The data correspond to an integrated luminosity of 19.7 fb$^{-1}$. The data are in good agreement with the standard model prediction. An upper limit at 95$\\%$ CL on the product of cross section times branching fraction into tau pairs is calculated as a function of the resonance mass for the Sequential Standard Model $Z'$ ($Z'_{SSM}$ masses excluded up to 1300 GeV) and for the GUT-inspired $E_6$ model ($Z'_{\\psi}$ masses excluded up to 810 GeV). The results are further interpreted in terms of the Arkani-Hamed, Dimopolous, and Dvali (ADD) model, setting an exclusion limit on the parameter $\\Lambda_T$ up to 2800 GeV.

  14. CO2 Removal from Mars EMU Project

    Data.gov (United States)

    National Aeronautics and Space Administration — CO2 control for during ExtraVehicular Activity (EVA) on mars is challenging. Lithium hydroxide (LiOH) canisters have impractical logistics penalties, and regenerable...

  15. The Forex Regime and EMU Expansion

    NARCIS (Netherlands)

    P.W. van Foreest; C.G. de Vries (Casper)

    2002-01-01

    textabstractThis paper provides empirical evidence that, irrespective of the foreign exchange rate regime, countries with high monetary volatility have lower relative output growth rates. It is argued that due to the forward looking nature of the foreign exchange market, exchange rate stability

  16. The Forex Regime and EMU Expansion

    NARCIS (Netherlands)

    P.W. van Foreest; C.G. de Vries (Casper)

    2002-01-01

    textabstractThis paper provides empirical evidence that, irrespective of the foreign exchange rate regime, countries with high monetary volatility have lower relative output growth rates. It is argued that due to the forward looking nature of the foreign exchange market, exchange rate stability hing

  17. Taxonomy Icon Data: emu [Taxonomy Icon

    Lifescience Database Archive (English)

    Full Text Available g Dromaius_novaehollandiae_NL.png Dromaius_novaehollandiae_S.png Dromaius_novaehollandiae_NS.png http://biosciencedbc.jp/taxonomy..._icon/icon.cgi?i=Dromaius+novaehollandiae&t=L http://biosciencedbc.jp/taxonomy_icon/ico...n.cgi?i=Dromaius+novaehollandiae&t=NL http://biosciencedbc.jp/taxonomy_icon/icon....cgi?i=Dromaius+novaehollandiae&t=S http://biosciencedbc.jp/taxonomy_icon/icon.cgi?i=Dromaius+novaehollandiae&t=NS ...

  18. Is fiscal policy coordination in EMU desirable?

    NARCIS (Netherlands)

    R.M.W.J. Beetsma; X. Debrun; F.J.G.M. Klaassen

    2001-01-01

    'It is widely argued that Europe's unified monetary policy calls for international coordination of fiscal policy. This paper surveys the issues involved with the coordination of fiscal policies as a demand management tool. We discuss ex-ante and ex-post coordination. The former operates through bind

  19. CO2 Removal from Mars EMU Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A practical CO2 control system for ExtraVehicular Activity (EVA) on Mars have not yet been developed. TDA Research, Inc. proposes to develop a durable,...

  20. A Matrix Method of Analyzing the Thermodynamic System of Advance Boiling Water Reactor Nuclear Power Unit%先进型沸水堆核电机组热经济性矩阵分析方法

    Institute of Scientific and Technical Information of China (English)

    冉鹏; 李庚生; 廖丹; 朱伟平

    2010-01-01

    根据先进型沸水堆(advance boiling water reactor,ABWR)核电机组热力系统的结构特点,基于热力系统等效热降分析方法和矩阵方法,确定其主、辅系统的划分原则以及辅助汽水成分划分原则,对先进型沸水堆各种汽水成分进行归并处理,构建表达规则的先进型沸水堆核电机组汽水分布方程填写规则,推导出适合先进型沸水堆核电机组热力系统热经济性分析的通用矩阵方法,并给出该类型核电机组辅助汽水成分对热经济性影响的表达方式.该矩阵全面反映了先进犁沸水堆核电机组热力系统主系统和各种辅助系统对机组热经济性的影响状况,每个子矩阵物理意义明确、规律性强,可使先进型沸水堆核电机组热力系统的整体计算和局部分析变得清晰、简单,适合于计算机程序化,并通过实例对该方法进行了验证.

  1. Advance in Diagnosis Evaluation Tools and Treatment of Delirium in Intensive Care Unit%ICU谵妄的诊断评估工具和处理新进展

    Institute of Scientific and Technical Information of China (English)

    李喜元; 尹吉东

    2011-01-01

    Delirium is a very common cognitive disorder syndrome in patients in intensive care unit ( ICU ),and the mechanism is unclear. It has three forms: hyperactive, hypoactive, and mixed type. Among three forms,the hypoactive type is often neglected because of lack of positive symptom. There are two valid and reliable tools which were used to diagnose delirium in ICU : the Confusion Assessment Method for the ICU and the Intensive Care Delirium Screening Checklist. Haloperidol is the first choice to treat delirium in ICU.More extensive attention on delirium in ICU is expected in the future days.%谵妄是重症监护病房(ICU)患者十分常见的精神紊乱综合征,确切的机制不明.它分为三种类型:活动过多型,活动过少型,混合型.其中,活动过少型由于缺乏症状,通常被忽视.ICU意识紊乱评估方法和重症监护谵妄筛查检查表是诊断ICU谵妄的两种有效的、可靠的工具.氟哌啶醇是治疗ICU谵妄的首选药物.期待未来有更多的ICU从业人员给予ICU谵妄更广泛的关注.

  2. Structure Design of 2 5 0 km High-speed EMU Gearbox Suspended Device%250 km高速动车组齿轮箱悬挂装置结构设计

    Institute of Scientific and Technical Information of China (English)

    孙涛; 吴正雨

    2015-01-01

    高速动车齿轮箱的悬挂结构是驱动装置的重要承载部件,其不但能承受齿轮传递转矩时箱体的反作用力,还能承受动车高速运行时各方向的振动冲击;因此,在设计时应保证结构具有足够的强度,并且满足结构的减重要求。本文根据齿轮箱承载方式及相关接口尺寸,利用三维设计软件及有限元分析软件,对悬挂结构进行多次优化与强度计算。结果表明,最终设计结构较初始设计结构强度提高了23%,质量减小了12%。对实际结构进行了应力测试,计算结果与测试结果吻合较好。%The suspended device of high-speed EMU gearbox is the important load-bearing components of driving de-vice,which can not only withstand the reaction of gearbox when the gear transmitting torque,but also can withstand the vi-bration and shock for each direction of the CRH train running at a high speed.So it should guarantee structure with enough strength and satisfy the requirement of the structure weight reduction when designing.According to the load mode of gear-box and the related interfaces size,optimized the suspended structure and calculated the strength many times with the 3D de-sign software and the finite element analysis software,the results showed that comparing with the initial designed structure, the strength of final designed structure increased 23%,the weight decreased 12%.Meanwhile,did the stress tests for the actual structure,the calculation results were close to the test results.

  3. United States

    Directory of Open Access Journals (Sweden)

    Stephen Bernow

    1998-12-01

    Full Text Available This paper presents and discusses an integrated set of policies designed to reduce U.S. carbon emissions over the next four decades. This innovation path also aims to promote environmental quality, particularly by reducing emissions of criteria air pollutants, to reduce U.S. dependence on imported oil, and to induce technological innovation and diffusion in energy production and consumption. The innovation path would reduce economy-wide carbon emissions by 26% below baseline projections for 2010 and by 62% below baseline projections for 2030; this translates into 10% below 1990 levels in 2010 and 45% below 1990 levels in 2030. Emissions of criteria pollutants also would be significantly reduced, as would petroleum imports by the United States. Moreover, the innovation path would yield cumulative net savings for the United States of $218 billion (1993 dollars through 2010, or $19 billion on a leveled annual basis, and would result in 800,000 additional jobs nationwide by 2010. Although the overall findings from the innovation path analysis are robust, the results should be taken as indicative, rather than precisely predictive, owing to uncertainties in future costs, prices, technology performance, and consumer behavior.

  4. Integrating Palliative Care into the Care of Neurocritically Ill Patients: A Report from The IPAL-ICU (Improving Palliative Care in the Intensive Care Unit) Project Advisory Board and the Center to Advance Palliative Care

    Science.gov (United States)

    Frontera, Jennifer A.; Curtis, J. Randall; Nelson, Judith E.; Campbell, Margaret; Gabriel, Michelle; Hays, Ross M.; Mosenthal, Anne C.; Mulkerin, Colleen; Puntillo, Kathleen A.; Ray, Daniel E.; Bassett, Rick; Boss, Renee D.; Lustbader, Dana R.; Brasel, Karen J.; Weiss, Stefanie P.; Weissman, David E.

    2015-01-01

    Objectives To describe unique features of neurocritical illness that are relevant to provision of high-quality palliative care; To discuss key prognostic aids and their limitations for neurocritical illnesses; To review challenges and strategies for establishing realistic goals of care for patients in the neuro-ICU; To describe elements of best practice concerning symptom management, limitation of life support, and organ donation for the neurocritically ill. Data Sources A search of Pubmed and MEDLINE was conducted from inception through January 2015 for all English-language articles using the term “palliative care,” “supportive care,” “end-of-life care,” “withdrawal of life-sustaining therapy,” “limitation of life support,” “prognosis,” or “goals of care” together with “neurocritical care,” “neurointensive care,” “neurological,” “stroke,” “subarachnoid hemorrhage,” “intracerebral hemorrhage,” or “brain injury.” Data Extraction and Synthesis We reviewed the existing literature on delivery of palliative care in the neurointensive care unit setting, focusing on challenges and strategies for establishing realistic and appropriate goals of care, symptom management, organ donation, and other considerations related to use and limitation of life-sustaining therapies for neurocritically ill patients. Based on review of these articles and the experiences of our interdisciplinary/interprofessional expert Advisory Board, this report was prepared to guide critical care staff, palliative care specialists, and others who practice in this setting. Conclusions Most neurocritically ill patients and their families face the sudden onset of devastating cognitive and functional changes that challenge clinicians to provide patient-centered palliative care within a complex and often uncertain prognostic environment. Application of palliative care principles concerning symptom relief, goal setting, and family emotional support, will

  5. 图形处理器在大规模力学问题计算中的应用进展%ADVANCES IN GRAPHICS PROCESSING UNITS' APPLICATIONS TO THE COMPUTATION OF LARGE-SCALE MECHANICAL PROBLEMS

    Institute of Scientific and Technical Information of China (English)

    夏健明; 魏德敏

    2010-01-01

    现代图形处理器(graphics processing units,GPU)具有较强的并行数值运算功能.该文简单介绍了GPU的硬件结构,基于GPU通用计算的数据结构和实现方法,以及用于编写片元程序的OpenGL着色语言.介绍了应用GPU计算大规模力学问题的研究进展.简要介绍了以下内容:应用GPU模拟自然界的流体现象,其实质是使用有限差分法求解Navier-Stokes方程;应用GPU实现有限元法计算,使用基于GPU的共轭梯度法求解有限元方程组;应用GPU实现分子动力学计算,用GPU计算原子间短程作用力,并生成邻近原子列表;应用GPU实现量子力学Monte Carlo计算;应用GPU实现n个物体的引力相互作用,用GPU纹理存储n个物体的位置、质量、速度和加速度等.对基于图象处理器和中央处理器的计算作比较,已完成了以下基于GPU的计算:实现求解线性方程组的高斯消元法和共轭梯度法,并应用于大规模的有限元计算;加速无网格法计算;加速线性和非线性分子结构力学方法计算;用于计算分析碳纳米管的力学性能.指出GPU在大规模力学计算中的研究方向.

  6. Forward Deployed Robotic Unit

    Science.gov (United States)

    Brendle, Bruce E., Jr.; Bornstein, Jonathan A.

    2000-07-01

    Forward Deployed Robotic Unit (FDRU) is a core science and technology objective of the US Army, which will demonstrate the impact of autonomous systems on all phases of future land warfare. It will develop, integrate and demonstrate technology required to achieve robotic and fire control capabilities for future land combat vehicles, e.g., Future Combat Systems, using a system of systems approach that culminates in a field demonstration in 2005. It will also provide the required unmanned assets and conduct the demonstration. Battle Lab Warfighting Experiments and data analysis required to understand the effects of unmanned assets on combat operations. The US Army Tank- Automotive & Armaments Command and the US Army Research Laboratory are teaming in an effort to leverage prior technology achievements in the areas of autonomous mobility, architecture, sensor and robotics system integration; advance the state-of-the-art in these areas; and to provide field demonstration/application of the technologies.

  7. Spacesuit Water Membrane Evaporator Integration with the ISS Extravehicular Mobility Unit

    Science.gov (United States)

    Margiott, Victoria; Boyle, Robert

    2014-01-01

    NASA has developed a Solid Water Membrane Evaporation (SWME) to provide cooling for the next generation spacesuit. The current spacesuit team has looked at this technology from the standpoint of using the ISS EMU to demonstrate the SWME technology while EVA, and from the standpoint of augmenting EMU cooling in the case of a fouled EMU cooling system. One approach to increasing the TRL of the system is to incorporate this hardware with the existing EMU. Several integration issues were addressed to support a potential demonstration of the SWME with the existing EMU. Systems analysis was performed to assess the capability of the SWME to maintain crewmember cooling and comfort as a replacement for sublimation. The materials of the SWME were reviewed to address compatibility with the EMU. Conceptual system placement and integration with the EMU via an EVA umbilical system to ensure crew mobility and Airlock egress were performed. A concept of operation for EVA use was identified that is compatible with the existing system. This concept is extensible as a means to provide cooling for the existing EMU. The cooling system of one of the EMUs on orbit has degraded, with the root cause undetermined. Should there be a common cause resident on ISS, this integration could provide a means to recover cooling capability for EMUs on orbit.

  8. Concurrent administration of the MMPI-2 and PAI in a sample of patients with epileptic or non-epileptic seizures: implications for an inpatient epilepsy monitoring unit.

    Science.gov (United States)

    Gale, Shawn D; Hill, Stacy W

    2012-10-01

    The Minnesota Multiphasic Personality Inventory-second edition (MMPI-2) and the Personality Assessment Inventory (PAI) are commonly used in the epilepsy monitoring unit (EMU) to evaluate personality characteristics and mood-related symptoms in those individuals being evaluated for epileptic seizures (ES) or psychogenic non-epileptic seizures (PNES). A direct comparison of these measures through concurrent administration to the same group has not been carried out. Both measures were administered to 40 patients (17 ES and 23 PNES). Logistic regression suggested the optimal predictive model for EMU discharge diagnosis included subscales from each measure, which outperformed either measure separately. Combining the conversion (SOM-C) and health concerns (SOM-H) subscales from the PAI and the hysteria subscale (Hy) from the MMPI-2 resulted in 85% overall classification accuracy, 86.7% sensitivity, and 82.4% specificity. Variability in the literature regarding the predictive utility of these measures may stem from the possibility that they measure different aspects of PNES. Copyright © 2012 Elsevier Inc. All rights reserved.

  9. Soft computing in advanced robotics

    CERN Document Server

    Kobayashi, Ichiro; Kim, Euntai

    2014-01-01

    Intelligent system and robotics are inevitably bound up; intelligent robots makes embodiment of system integration by using the intelligent systems. We can figure out that intelligent systems are to cell units, while intelligent robots are to body components. The two technologies have been synchronized in progress. Making leverage of the robotics and intelligent systems, applications cover boundlessly the range from our daily life to space station; manufacturing, healthcare, environment, energy, education, personal assistance, logistics. This book aims at presenting the research results in relevance with intelligent robotics technology. We propose to researchers and practitioners some methods to advance the intelligent systems and apply them to advanced robotics technology. This book consists of 10 contributions that feature mobile robots, robot emotion, electric power steering, multi-agent, fuzzy visual navigation, adaptive network-based fuzzy inference system, swarm EKF localization and inspection robot. Th...

  10. Advanced Vehicle Testing and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Garetson, Thomas [The Clarity Group, Incorporated, Chicago, IL (United States)

    2013-03-31

    The objective of the United States (U.S.) Department of Energy's (DOEs) Advanced Vehicle Testing and Evaluation (AVTE) project was to provide test and evaluation services for advanced technology vehicles, to establish a performance baseline, to determine vehicle reliability, and to evaluate vehicle operating costs in fleet operations.Vehicles tested include light and medium-duty vehicles in conventional, hybrid, and all-electric configurations using conventional and alternative fuels, including hydrogen in internal combustion engines. Vehicles were tested on closed tracks and chassis dynamometers, as well as operated on public roads, in fleet operations, and over prescribed routes. All testing was controlled by procedures developed specifically to support such testing.

  11. Advanced Vehicle Testing and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Garetson, Thomas [The Clarity Group, Incorporated, Chicago, IL (United States)

    2013-03-31

    The objective of the United States (U.S.) Department of Energy's (DOEs) Advanced Vehicle Testing and Evaluation (AVTE) project was to provide test and evaluation services for advanced technology vehicles, to establish a performance baseline, to determine vehicle reliability, and to evaluate vehicle operating costs in fleet operations.Vehicles tested include light and medium-duty vehicles in conventional, hybrid, and all-electric configurations using conventional and alternative fuels, including hydrogen in internal combustion engines. Vehicles were tested on closed tracks and chassis dynamometers, as well as operated on public roads, in fleet operations, and over prescribed routes. All testing was controlled by procedures developed specifically to support such testing.

  12. Termination unit

    Energy Technology Data Exchange (ETDEWEB)

    Traeholt, Chresten; Willen, Dag; Roden, Mark; Tolbert, Jerry C.; Lindsay, David; Fisher, Paul W.; Nielsen, Carsten Thidemann

    2016-05-03

    Cable end section comprises end-parts of N electrical phases/neutral, and a thermally-insulation envelope comprising cooling fluid. The end-parts each comprises a conductor and are arranged with phase 1 innermost, N outermost surrounded by the neutral, electrical insulation being between phases and N and neutral. The end-parts comprise contacting surfaces located sequentially along the longitudinal extension of the end-section. A termination unit has an insulating envelope connected to a cryostat, special parts at both ends comprising an adapter piece at the cable interface and a closing end-piece terminating the envelope in the end-section. The special parts houses an inlet and/or outlet for cooling fluid. The space between an inner wall of the envelope and a central opening of the cable is filled with cooling fluid. The special part at the end connecting to the cryostat houses an inlet or outlet, splitting cooling flow into cable annular flow and termination annular flow.

  13. GPU Pro advanced rendering techniques

    CERN Document Server

    Engel, Wolfgang

    2010-01-01

    This book covers essential tools and techniques for programming the graphics processing unit. Brought to you by Wolfgang Engel and the same team of editors who made the ShaderX series a success, this volume covers advanced rendering techniques, engine design, GPGPU techniques, related mathematical techniques, and game postmortems. A special emphasis is placed on handheld programming to account for the increased importance of graphics on mobile devices, especially the iPhone and iPod touch.Example programs and source code can be downloaded from the book's CRC Press web page. 

  14. Drafting. Advanced Print Reading--Electrical.

    Science.gov (United States)

    Oregon State Dept. of Education, Salem.

    This document is a workbook for drafting students learning advanced print reading for electricity applications. The workbook contains seven units covering the following material: architectural working drawings; architectural symbols and dimensions; basic architectural electrical symbols; wiring symbols; riser diagrams; schematic diagrams; and…

  15. Advancing Sustainable Materials Management: Facts and Figures Report

    Science.gov (United States)

    Each year EPA releases the Advancing Sustainable Materials Management: Facts and Figures report, formerly called Municipal Solid Waste in the United States: Facts and Figures. It includes information on Municipal Solid Waste generation, recycling, an

  16. Advances in forefoot trauma.

    Science.gov (United States)

    Clements, J Randolph; Schopf, Robert

    2013-07-01

    Forefoot traumas, particularly involving the metatarsals, are commonly occurring injuries. There have been several advances in management of these injuries. These advances include updates in operative technique, internal fixation options, plating constructs, and external fixation. In addition, the advances of soft tissue management have improved outcomes. This article outlines these injuries and provides an update on techniques, principles, and understanding of managing forefoot trauma.

  17. Advanced Stellar Compass - Adeos II - Interface Control Document

    DEFF Research Database (Denmark)

    Betto, Maurizio; Jørgensen, John Leif; Kilsgaard, Søren;

    This document describes the Advanced Stellar Compass (ASC) and defines the interfaces between the instrument and the ADEOS II satellite. The ASC is a highly advanced and autonomous Stellar Reference Unit designed, developed and produced by the Space Instrumentation Group of the Department...

  18. Advanced Stellar Compass - Proposal for the LunARSat project

    DEFF Research Database (Denmark)

    Betto, Maurizio; Jørgensen, John Leif; Kilsgaard, Søren;

    1998-01-01

    request for proposal (r.f.p.) for the LunARSat star tracker.The Advanced Stellar Compass (ASC) is a highly advanced and autonomous Stellar Reference Unit designed, developed and produced by the Space Instrumentation Group of the Department of Automation of the Technical University of Denmark.The document...

  19. 69 Hotspot Advance Speed - Hotspot Size/Core-Hotspot distance ...

    African Journals Online (AJOL)

    kagoyire

    http://dx.doi.org/10.4314/rj.v1i1S.6D. 69. Rwanda ... these hotspots advance away from the AGN core, where is the bulk advance speed of the hotspot in units .... 0.2,0.4 0.1and 0.3 0.1 for the large size FR II, MSO and CSO sources respectively.

  20. The Importance of Taxonomy in Biological Education at Advanced Level.

    Science.gov (United States)

    Honey, John N.; Paxman, Heather M.

    1986-01-01

    Reports on the status of the teaching of taxonomy in advanced biology classes in the United Kingdom. Reviews findings related to examination requirements, the principles, terminology, and methods of taxonomy, the understanding and attitudes of teachers of taxonomy principles, and the position of the topic in the advanced biology syllabus. (ML)

  1. Living Wills and Advance Directives for Medical Decisions

    Science.gov (United States)

    ... a cure is possible? Have discussions with your primary care doctor, your health care agent, family and friends about your personal ... Institute on Aging. http://www.nia.nih.gov/health/publication/advance-care-planning. ... Pay attention to donation language in an advance directive. United ...

  2. Advances in chemical Physics

    CERN Document Server

    Rice, Stuart A

    2011-01-01

    The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series offers contributions from internationally renowned chemists and serves as the perfect supplement to any advanced graduate class devoted to the study of che

  3. Advances in chemical physics

    CERN Document Server

    Rice, Stuart A

    2012-01-01

    The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics field with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series serves as the perfect supplement to any advanced graduate class devoted to the study of chemical physics. This volume explores: Quantum Dynamical Resonances in Ch

  4. Advances in chemical physics

    CERN Document Server

    Rice, Stuart A

    2011-01-01

    The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series offers contributions from internationally renowned chemists and serves as the perfect supplement to any advanced graduate class devoted to the study of che

  5. Advances in chemical physics

    CERN Document Server

    Rice, Stuart A

    2012-01-01

    The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series presents contributions from internationally renowned chemists and serves as the perfect supplement to any advanced graduate class devoted to the study o

  6. ACR-700 advanced technologies

    Energy Technology Data Exchange (ETDEWEB)

    Tapping, R.L.; Turner, C.W. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada); Yu, S.K.W. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada); Olmstead, R.; Speranzini, R.A. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

    2004-12-01

    A successful advanced reactor plant will have optimized economics including reduced operating and maintenance costs, improved performance, and enhanced safety. Incorporating improvements based on advanced technologies ensures cost, safety and operational competitiveness of the ACR-700. These advanced technologies include modern configuration management; construction technologies; operational technology for the control centre and information systems for plant monitoring and analysis. This paper summarizes the advanced technologies used to achieve construction and operational improvements to enhance plant economic competitiveness, advances in the operational technology used for reactor control, and presents the development of the Smart CANDU suite of tools and its application to existing operating reactors and to the ACR-700. (author)

  7. Advanced Development Waste Processing Unit for Combat Vehicles. Phase 2

    Science.gov (United States)

    1987-12-29

    designed. The Waste Disposal Port (WDP) was designed so as to permit waste to be placed into the WPU directly from the Pacto toilet currently in the CCPV...designed to fit within the confines of the waste storage compartment under the Pacto toilet in the CCPV. A WDP was Incorporated in the top of the WPU

  8. Advanced Direct Liquefaction Concepts for PETC Generic Units - Phase II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1997-12-01

    The results of Laboratory and Bench-Scale experiments and supporting technical and economic assessments conducted under DOE Contract No. DE-AC22-91PC91040 are reported for the period July 1, 1997 to September 30, 1997. This contract is with the University of Kentucky Research Foundation which supports work with the University of Kentucky Center for Applied Energy Research, CONSOL, Inc., LDP Associates, and Hydrocarbon Technologies, Inc. This work involves the introduction into the basic two stage liquefaction process several novel concepts which include dispersed lower-cost catalysts, coal cleaning by oil agglomeration, and distillate hydrotreating and dewaxing. Results are reported from experiments in which various methods were tested to activate dispersed Mo precursors. Several oxothiomolybdates precursors having S/Mo ratios from two to six were prepared. Another having a S/Mo ratio of eleven was also prepared that contained an excess of sulfur. In the catalyst screening test, none of these precursors exhibited an activity enhancement that might suggest that adding sulfur into the structure of the Mo precursors would be beneficial to the process. In another series of experiments, AHM impregnated coal slurried in the reaction mixture was pretreated withH S/H under pressure and successively heated for 30 min at 120, 250 2 2 and 360 C. THF conversions in the catalyst screening test were not affected while resid conversions o increased such that pretreated coals impregnated with 100 ppm Mo gave conversions equivalent to untreated coals impregnated with 300 ppm fresh Mo. Cobalt, nickel and potassium phosphomolybdates were prepared and tested as bimetallic precursors. The thermal stability of these compounds was evaluated in TG/MS to determine whether the presence of the added metal would stabilize the Keggin structure at reaction temperature. Coals impregnated with these salts showed the Ni and Co salts gave the same THF conversion as PMA while the Ni salt gave higher resid conversion than the other salts and untreated PMA. To activate PMA, a series of sulfided PMA materials was prepared by subjecting the crystalline acid to H S/H at 125-450 C. The chemistries 2 2 o of these partially sulfided materials are reported as well as the reactivity of several impregnated coals. None of the coals impregnated with these sulfided PMA materials gave conversions that exceeded PMA. Reports covering work by the subcontractors for this reporting period have not been received. A report from CONSOL covering a previous reporting period is included.

  9. Advanced Rotorcraft Transmission (ART) program

    Science.gov (United States)

    Heath, Gregory F.; Bossler, Robert B., Jr.

    1993-01-01

    Work performed by the McDonnell Douglas Helicopter Company and Lucas Western, Inc. within the U.S. Army/NASA Advanced Rotorcraft Transmission (ART) Program is summarized. The design of a 5000 horsepower transmission for a next generation advanced attack helicopter is described. Government goals for the program were to define technology and detail design the ART to meet, as a minimum, a weight reduction of 25 percent, an internal noise reduction of 10 dB plus a mean-time-between-removal (MTBR) of 5000 hours compared to a state-of-the-art baseline transmission. The split-torque transmission developed using face gears achieved a 40 percent weight reduction, a 9.6 dB noise reduction and a 5270 hour MTBR in meeting or exceeding the above goals. Aircraft mission performance and cost improvements resulting from installation of the ART would include a 17 to 22 percent improvement in loss-exchange ratio during combat, a 22 percent improvement in mean-time-between-failure, a transmission acquisition cost savings of 23 percent of $165K, per unit, and an average transmission direct operating cost savings of 33 percent, or $24K per flight hour. Face gear tests performed successfully at NASA Lewis are summarized. Also, program results of advanced material tooth scoring tests, single tooth bending tests, Charpy impact energy tests, compact tension fracture toughness tests and tensile strength tests are summarized.

  10. ADVANCED TURBINE SYSTEMS PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Sy Ali

    2002-03-01

    The market for power generation equipment is undergoing a tremendous transformation. The traditional electric utility industry is restructuring, promising new opportunities and challenges for all facilities to meet their demands for electric and thermal energy. Now more than ever, facilities have a host of options to choose from, including new distributed generation (DG) technologies that are entering the market as well as existing DG options that are improving in cost and performance. The market is beginning to recognize that some of these users have needs beyond traditional grid-based power. Together, these changes are motivating commercial and industrial facilities to re-evaluate their current mix of energy services. One of the emerging generating options is a new breed of advanced fuel cells. While there are a variety of fuel cell technologies being developed, the solid oxide fuel cells (SOFC) and molten carbonate fuel cells (MCFC) are especially promising, with their electric efficiency expected around 50-60 percent and their ability to generate either hot water or high quality steam. In addition, they both have the attractive characteristics of all fuel cells--relatively small siting footprint, rapid response to changing loads, very low emissions, quiet operation, and an inherently modular design lending itself to capacity expansion at predictable unit cost with reasonably short lead times. The objectives of this project are to:(1) Estimate the market potential for high efficiency fuel cell hybrids in the U.S.;(2) Segment market size by commercial, industrial, and other key markets;(3) Identify and evaluate potential early adopters; and(4) Develop results that will help prioritize and target future R&D investments. The study focuses on high efficiency MCFC- and SOFC-based hybrids and competing systems such as gas turbines, reciprocating engines, fuel cells and traditional grid service. Specific regions in the country have been identified where these

  11. Coin sorting unit; Koka ikkatsu tonyu shori unit

    Energy Technology Data Exchange (ETDEWEB)

    Oyabu, H.; Nishiyama, T.; Iijima, S. [Fuji Electric Co. Ltd., Tokyo (Japan)

    1999-08-10

    There are promising demands for barrier-free vending machines which can easily be used by the aged and the handicapped as well as ordinary people. Fuji Electric had developed an advanced unit for throwing in coins for the new hearty series that can smoothly be used by the aged and the handicapped. Its main advantages are (1) two or more coins can be thrown in together, (2) The port for putting in coins and the port for taking out change are of unified construction and simply adjoin each other, (3) Directional signs in braille are added. (author)

  12. The Holistic Leadership Model and the Nurse Unit Manager ...

    African Journals Online (AJOL)

    1Neonatal intensive care unit at Rwanda Military Hospital. 2University of ... Keywords: Nurse; nursing practice; leadership; management; caring; competencies; holistic nursing ... indicators of a profession's advancement or lack thereof.

  13. Genetics Experts Unite to I.D. Unknown Katrina Victims

    Science.gov (United States)

    ... Current Issue Past Issues Research News From NIH Genetics Experts Unite to I.D. Unknown Katrina Victims ... in the recent Advances in molecular biology and genetics," says team member Stephen Sherry, Ph.D., of ...

  14. Reducing costs by clustering maintenance activities for multiple critical units

    NARCIS (Netherlands)

    de Jonge, Bram; Klingenberg, Warse; Teunter, Ruud; Tinga, Tiedo

    Advances in sensor technology have enabled companies to make significant progress towards achieving condition-based maintenance (CBM). CBM provides the opportunity to perform maintenance actions more effectively. However, scheduling maintenance at the unit level may imply a high maintenance

  15. Advanced CNC Programming (EZ-CAM). 439-366.

    Science.gov (United States)

    Casey, Joe

    This document contains two units for an advanced course in computer numerical control (CNC) for computer-aided manufacturing. It is intended to familiarize students with the principles and techniques necessary to create proper CNC programs using computer software. Each unit consists of an introduction, instructional objectives, learning materials,…

  16. Advanced CNC Programming (EZ-CAM). 439-366.

    Science.gov (United States)

    Casey, Joe

    This document contains two units for an advanced course in computer numerical control (CNC) for computer-aided manufacturing. It is intended to familiarize students with the principles and techniques necessary to create proper CNC programs using computer software. Each unit consists of an introduction, instructional objectives, learning materials,…

  17. The Ecological Marine Units Project as a Framework for Collaborative Data Exploration, Distribution, and Knowledge Building

    Science.gov (United States)

    Wright, Dawn; Sayre, Roger; Breyer, Sean; Butler, Kevin; VanGraafeiland, Keith; Goodin, Kathy; Kavanaugh, Maria; Costello, Mark; Cressie, Noel; Basher, Zeenatul; Harris, Peter; Guinotte, John

    2017-04-01

    scientific research on species distributions and their relationships to the marine physical environment. To further benefit the community and facilitate collaborate knowledge building, data products are shared openly and interoperably via www.esri.com/ecological-marine-units. This includes provision of 3D point mesh and EMU clusters at the surface, bottom, and within the water column in varying formats via download, web services or web apps, as well as generic algorithms and GIS workflows that scale from global to regional and local. A major aim is for the community members to may move the research forward with higher-resolution data from their own field studies or areas of interest, with the original EMU project team assisting with GIS implementation (especially via a new online discussion forum), or hosting of additional data products as needed.

  18. United States Marine Corps Career Designation Board: Significant Factors in Predicting Selection

    Science.gov (United States)

    2014-03-01

    Total Force Data Warehouse USMC United States Marine Corps USNA United States Naval Academy WTI Weapons and Tactics Instructor XO...Tactics Instructor ( WTI ), Professional Military Education (PME) complete, and Special Education/Advanced Degree Programs’ graduates had a

  19. Teamwork in the Neonatal Intensive Care Unit

    Science.gov (United States)

    Barbosa, Vanessa Maziero

    2013-01-01

    Medical and technological advances in neonatology have prompted the initiation and expansion of developmentally supportive services for newborns and have incorporated rehabilitation professionals into the neonatal intensive care unit (NICU) multidisciplinary team. Availability of therapists specialized in the care of neonates, the roles of…

  20. Advanced Microturbine Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rosfjord, T; Tredway, W; Chen, A; Mulugeta, J; Bhatia, T

    2008-12-31

    In July 2000, the United Technologies Research Center (UTRC) was one of five recipients of a US Department of Energy contract under the Advanced Microturbine System (AMS) program managed by the Office of Distributed Energy (DE). The AMS program resulted from several government-industry workshops that recognized that microturbine systems could play an important role in improving customer choice and value for electrical power. That is, the group believed that electrical power could be delivered to customers more efficiently and reliably than the grid if an effective distributed energy strategy was followed. Further, the production of this distributed power would be accomplished with less undesirable pollutants of nitric oxides (NOx) unburned hydrocarbons (UHC), and carbon monoxide (CO). In 2000, the electrical grid delivered energy to US customers at a national average of approximately 32% efficiency. This value reflects a wide range of powerplants, but is dominated by older, coal burning stations that provide approximately 50% of US electrical power. The grid efficiency is also affected by transmission and distribution (T&D) line losses that can be significant during peak power usage. In some locations this loss is estimated to be 15%. Load pockets can also be so constrained that sufficient power cannot be transmitted without requiring the installation of new wires. New T&D can be very expensive and challenging as it is often required in populated regions that do not want above ground wires. While historically grid reliability has satisfied most customers, increasing electronic transactions and the computer-controlled processes of the 'digital economy' demand higher reliability. For them, power outages can be very costly because of transaction, work-in-progress, or perishable commodity losses. Powerplants that produce the grid electrical power emit significant levels of undesirable NOx, UHC, and CO pollutants. The level of emission is quoted as either a

  1. Advance Care Planning.

    Science.gov (United States)

    Stallworthy, Elizabeth J

    2013-04-16

    Advance care planning should be available to all patients with chronic kidney disease, including end-stage kidney disease on renal replacement therapy. Advance care planning is a process of patient-centred discussion, ideally involving family/significant others, to assist the patient to understand how their illness might affect them, identify their goals and establish how medical treatment might help them to achieve these. An Advance Care Plan is only one useful outcome from the Advance Care Planning process, the education of patient and family around prognosis and treatment options is likely to be beneficial whether or not a plan is written or the individual loses decision making capacity at the end of life. Facilitating Advance Care Planning discussions requires an understanding of their purpose and communication skills which need to be taught. Advance Care Planning needs to be supported by effective systems to enable the discussions and any resulting Plans to be used to aid subsequent decision making.

  2. GPU Pro 4 advanced rendering techniques

    CERN Document Server

    Engel, Wolfgang

    2013-01-01

    GPU Pro4: Advanced Rendering Techniques presents ready-to-use ideas and procedures that can help solve many of your day-to-day graphics programming challenges. Focusing on interactive media and games, the book covers up-to-date methods producing real-time graphics. Section editors Wolfgang Engel, Christopher Oat, Carsten Dachsbacher, Michal Valient, Wessam Bahnassi, and Sebastien St-Laurent have once again assembled a high-quality collection of cutting-edge techniques for advanced graphics processing unit (GPU) programming. Divided into six sections, the book begins with discussions on the abi

  3. GPU Pro 5 advanced rendering techniques

    CERN Document Server

    Engel, Wolfgang

    2014-01-01

    In GPU Pro5: Advanced Rendering Techniques, section editors Wolfgang Engel, Christopher Oat, Carsten Dachsbacher, Michal Valient, Wessam Bahnassi, and Marius Bjorge have once again assembled a high-quality collection of cutting-edge techniques for advanced graphics processing unit (GPU) programming. Divided into six sections, the book covers rendering, lighting, effects in image space, mobile devices, 3D engine design, and compute. It explores rasterization of liquids, ray tracing of art assets that would otherwise be used in a rasterized engine, physically based area lights, volumetric light

  4. Advances in pediatric anesthesia.

    Science.gov (United States)

    Burns, L S

    1997-03-01

    Advances in many aspects of pediatric anesthesia have resulted in a significant reduction in morbidity and mortality in children. Research and development have created vast improvements in pharmacology. Sophisticated monitoring and improvements in equipment evolved from advances made in scientific technology. Recognition of the psychological needs of children of all ages likely has reduced the incidence of lasting psychological effects after hospitalization. Finally, these important advances have made pediatric anesthesia a safer and more compassionate specialty.

  5. Advancing Ethical Neuroscience Research.

    Science.gov (United States)

    Borah, B Rashmi; Strand, Nicolle K; Chillag, Kata L

    2016-12-01

    As neuroscience research advances, researchers, clinicians, and other stakeholders will face a host of ethical challenges. The Presidential Commission for the Study of Bioethical Issues (Bioethics Commission) has published two reports that provide recommendations on how to advance research endeavors ethically. The commission addressed, among other issues, how to prioritize different types of neuroscience research and how to include research participants who have impaired consent capacity. The Bioethics Commission's recommendations provide a foundation for ethical guidelines as neuroscience research advances and progresses.

  6. Advances in Applied Mechanics

    OpenAIRE

    2014-01-01

    Advances in Applied Mechanics draws together recent significant advances in various topics in applied mechanics. Published since 1948, Advances in Applied Mechanics aims to provide authoritative review articles on topics in the mechanical sciences, primarily of interest to scientists and engineers working in the various branches of mechanics, but also of interest to the many who use the results of investigations in mechanics in various application areas, such as aerospace, chemical, civil, en...

  7. Portable Virtual Training Units

    Science.gov (United States)

    Malone, Reagan; Johnston, Alan

    2015-01-01

    The Mission Operations Lab initiated a project to design, develop, deliver, test, and validate a unique training system for astronaut and ground support personnel. In an effort to keep training costs low, virtual training units (VTUs) have been designed based on images of actual hardware and manipulated by a touch screen style interface for ground support personnel training. This project helped modernized the training system and materials by integrating them with mobile devices for training when operators or crew are unavailable to physically train in the facility. This project also tested the concept of a handheld remote device to control integrated trainers using International Space Station (ISS) training simulators as a platform. The portable VTU can interface with the full-sized VTU, allowing a trainer co-located with a trainee to remotely manipulate a VTU and evaluate a trainee's response. This project helped determine if it is useful, cost effective, and beneficial for the instructor to have a portable handheld device to control the behavior of the models during training. This project has advanced NASA Marshall Space Flight Center's (MSFC's) VTU capabilities with modern and relevant technology to support space flight training needs of today and tomorrow.

  8. Advanced Manufacturing Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Manufacturing Laboratory at the University of Maryland provides the state of the art facilities for realizing next generation products and educating the...

  9. Advanced Photon Source (APS)

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Photon Source (APS) at the U.S. Department of Energy's Argonne National Laboratoryprovides this nation's (in fact, this hemisphere's) brightest storage...

  10. Advanced Chemistry Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Description/History: Chemistry laboratory The Advanced Chemistry Laboratory (ACL) is a unique facility designed for working with the most super toxic compounds known...

  11. Advanced Simulation Center

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Simulation Center consists of 10 individual facilities which provide missile and submunition hardware-in-the-loop simulation capabilities. The following...

  12. Advanced Demonstration and Test Reactor Options Study

    Energy Technology Data Exchange (ETDEWEB)

    Petti, David Andrew [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Gehin, J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gougar, Hans David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Strydom, Gerhard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Heidet, F. [Argonne National Lab. (ANL), Argonne, IL (United States); Kinsey, J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Grandy, Christopher [Argonne National Lab. (ANL), Argonne, IL (United States); Qualls, A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Brown, Nicholas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hoffman, E. [Argonne National Lab. (ANL), Argonne, IL (United States); Croson, D. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-01

    Global efforts to address climate change will require large-scale decarbonization of energy production in the United States and elsewhere. Nuclear power already provides 20% of electricity production in the United States (U.S.) and is increasing in countries undergoing rapid growth around the world. Because reliable, grid-stabilizing, low emission electricity generation, energy security, and energy resource diversity will be increasingly valued, nuclear power’s share of electricity production has a potential to grow. In addition, there are non electricity applications (e.g., process heat, desalination, hydrogen production) that could be better served by advanced nuclear systems. Thus, the timely development, demonstration, and commercialization of advanced nuclear reactors could diversify the nuclear technologies available and offer attractive technology options to expand the impact of nuclear energy for electricity generation and non-electricity missions. The purpose of this planning study is to provide transparent and defensible technology options for a test and/or demonstration reactor(s) to be built to support public policy, innovation and long term commercialization within the context of the Department of Energy’s (DOE’s) broader commitment to pursuing an “all of the above” clean energy strategy and associated time lines. This planning study includes identification of the key features and timing needed for advanced test or demonstration reactors to support research, development, and technology demonstration leading to the commercialization of power plants built upon these advanced reactor platforms. This planning study is consistent with the Congressional language contained within the fiscal year 2015 appropriation that directed the DOE to conduct a planning study to evaluate “advanced reactor technology options, capabilities, and requirements within the context of national needs and public policy to support innovation in nuclear energy

  13. Ensuring Operational Readiness: Private Military Contractor Support for the United States Air Force

    Science.gov (United States)

    2017-03-15

    Ensuring Operational Readiness: Private Military Contractor Support for the United States Air Force A Monograph by Maj Stephen P. Joca United...States Air Force School of Advanced Military Studies United States Army Command and General Staff College Fort Leavenworth, Kansas 2017 Approved...Operational Readiness: Private Military Contractor Support for the United States Air Force Approved by: __________________________________, Monograph

  14. Selection of Environmentally Friendly Solvents for the Extravehicular Mobility Unit Secondary Oxygen Pack Cold Trap Testing

    Science.gov (United States)

    Steele, John; Chullen, Cinda; Morenz, Jesse; Stephenson, Curtis

    2010-01-01

    Freon-113(TradeMark) has been used as a chemistry lab sampling solvent at NASA/JSC for EMU (extravehicular Mobility Unit) SOP (Secondary Oxygen Pack) oxygen testing Cold Traps utilized at the USA (United Space Alliance) Houston facility. Similar testing has occurred at the HSWL (Hamilton Sundstrand Windsor Locks) facility. A NASA Executive Order bans the procurement of all ODS (ozone depleting substances), including Freon-113 by the end of 2009. In order to comply with NASA direction, HSWL began evaluating viable solvents to replace Freon-113 . The study and testing effort to find Freon-113 replacements used for Cold Trap sampling is the subject of this paper. Test results have shown HFE-7100 (a 3M fluorinated ether) to be an adequate replacement for Freon-113 as a solvent to remove and measure the non-volatile residue collected in a Cold Trap during oxygen testing. Furthermore, S-316 (a Horiba Instruments Inc. high molecular weight, non-ODS chlorofluorocarbon) was found to be an adequate replacement for Freon-113 as a solvent to reconstitute non-volatile residue removed from a Cold Trap during oxygen testing for subsequent HC (hydrocarbon) analysis via FTIR (Fourier Transform Infrared Spectroscopy).

  15. Advances in dental materials.

    Science.gov (United States)

    Fleming, Garry J P

    2014-05-01

    The dental market is replete with new resorative materials marketed on the basis of novel technological advances in materials chemistry, bonding capability or reduced operator time and/or technique sensitivity. This paper aims to consider advances in current materials, with an emphasis on their role in supporting contemporary clinical practice.

  16. Advanced Integrated Traction System

    Energy Technology Data Exchange (ETDEWEB)

    Greg Smith; Charles Gough

    2011-08-31

    The United States Department of Energy elaborates the compelling need for a commercialized competitively priced electric traction drive system to proliferate the acceptance of HEVs, PHEVs, and FCVs in the market. The desired end result is a technically and commercially verified integrated ETS (Electric Traction System) product design that can be manufactured and distributed through a broad network of competitive suppliers to all auto manufacturers. The objectives of this FCVT program are to develop advanced technologies for an integrated ETS capable of 55kW peak power for 18 seconds and 30kW of continuous power. Additionally, to accommodate a variety of automotive platforms the ETS design should be scalable to 120kW peak power for 18 seconds and 65kW of continuous power. The ETS (exclusive of the DC/DC Converter) is to cost no more than $660 (55kW at $12/kW) to produce in quantities of 100,000 units per year, should have a total weight less than 46kg, and have a volume less than 16 liters. The cost target for the optional Bi-Directional DC/DC Converter is $375. The goal is to achieve these targets with the use of engine coolant at a nominal temperature of 105C. The system efficiency should exceed 90% at 20% of rated torque over 10% to 100% of maximum speed. The nominal operating system voltage is to be 325V, with consideration for higher voltages. This project investigated a wide range of technologies, including ETS topologies, components, and interconnects. Each technology and its validity for automotive use were verified and then these technologies were integrated into a high temperature ETS design that would support a wide variety of applications (fuel cell, hybrids, electrics, and plug-ins). This ETS met all the DOE 2010 objectives of cost, weight, volume and efficiency, and the specific power and power density 2015 objectives. Additionally a bi-directional converter was developed that provides charging and electric power take-off which is the first step

  17. Advanced Distillation Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Maddalena Fanelli; Ravi Arora; Annalee Tonkovich; Jennifer Marco; Ed Rode

    2010-03-24

    The Advanced Distillation project was concluded on December 31, 2009. This U.S. Department of Energy (DOE) funded project was completed successfully and within budget during a timeline approved by DOE project managers, which included a one year extension to the initial ending date. The subject technology, Microchannel Process Technology (MPT) distillation, was expected to provide both capital and operating cost savings compared to conventional distillation technology. With efforts from Velocys and its project partners, MPT distillation was successfully demonstrated at a laboratory scale and its energy savings potential was calculated. While many objectives established at the beginning of the project were met, the project was only partially successful. At the conclusion, it appears that MPT distillation is not a good fit for the targeted separation of ethane and ethylene in large-scale ethylene production facilities, as greater advantages were seen for smaller scale distillations. Early in the project, work involved flowsheet analyses to discern the economic viability of ethane-ethylene MPT distillation and develop strategies for maximizing its impact on the economics of the process. This study confirmed that through modification to standard operating processes, MPT can enable net energy savings in excess of 20%. This advantage was used by ABB Lumus to determine the potential impact of MPT distillation on the ethane-ethylene market. The study indicated that a substantial market exists if the energy saving could be realized and if installed capital cost of MPT distillation was on par or less than conventional technology. Unfortunately, it was determined that the large number of MPT distillation units needed to perform ethane-ethylene separation for world-scale ethylene facilities, makes the targeted separation a poor fit for the technology in this application at the current state of manufacturing costs. Over the course of the project, distillation experiments were

  18. Advanced Architectures for Astrophysical Supercomputing

    CERN Document Server

    Barsdell, Benjamin R; Fluke, Christopher J

    2010-01-01

    Astronomers have come to rely on the increasing performance of computers to reduce, analyze, simulate and visualize their data. In this environment, faster computation can mean more science outcomes or the opening up of new parameter spaces for investigation. If we are to avoid major issues when implementing codes on advanced architectures, it is important that we have a solid understanding of our algorithms. A recent addition to the high-performance computing scene that highlights this point is the graphics processing unit (GPU). The hardware originally designed for speeding-up graphics rendering in video games is now achieving speed-ups of $O(100\\times)$ in general-purpose computation -- performance that cannot be ignored. We are using a generalized approach, based on the analysis of astronomy algorithms, to identify the optimal problem-types and techniques for taking advantage of both current GPU hardware and future developments in computing architectures.

  19. Advanced Emissions Control Development Program

    Energy Technology Data Exchange (ETDEWEB)

    A.P.Evans; K.E. Redinger; M.J. Holmes

    1998-04-01

    The objective of the Advanced Emissions Control Development Program (AECDP) is to develop practical, cost-effective strategies for reducing the emissions of air toxics from coal-fired boilers. Ideally, the project aim is to effectively control air toxic emissions through the use of conventional flue gas cleanup equipment such as electrostatic precipitators (ESPS), fabric filters (baghouse), and wet flue gas desulfurization. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate and hydrogen chloride. Following the construction and evaluation of a representative air toxics test facility in Phase I, Phase II focused on the evaluation of mercury and several other air toxics emissions. The AECDP is jointly funded by the United States Department of Energy's Federal Energy Technology Center (DOE), the Ohio Coal Development Office within the Ohio Department of Development (oCDO), and Babcock& Wilcox-a McDermott company (B&W).

  20. Advanced Battery Diagnosis for Electric Vehicles

    OpenAIRE

    Lamichhane, Chudamani

    2008-01-01

    Summary Literatures on battery technologies and diagnosis of its parameters were studied. The innovative battery technologies from basic knowledge to world standard testing procedures were analysed and discussed in the report. The established battery test station and flowchart was followed during the battery test preparation and testing. In order to understand and verify the battery performance, the well established test procedures developed by USABC (United States Advanced Battery Consorti...

  1. Mitochondrial diseases: advances and issues

    Directory of Open Access Journals (Sweden)

    Scarpelli M

    2017-02-01

    Full Text Available Mauro Scarpelli,1 Alice Todeschini,2 Irene Volonghi,2 Alessandro Padovani,2 Massimiliano Filosto2 1Department of Neuroscience, Unit of Neurology, Azienda Ospedaliera Universitaria Integrata Verona, Verona, Italy; 2Center for Neuromuscular Diseases and Neuropathies, Unit of Neurology, ASST “Spedali Civili”, University of Brescia, Brescia, Italy Abstract: Mitochondrial diseases (MDs are a clinically heterogeneous group of disorders caused by a dysfunction of the mitochondrial respiratory chain. They can be related to mutation of genes encoded using either nuclear DNA or mitochondrial DNA. The advent of next generation sequencing and whole exome sequencing in studying the molecular bases of MDs will bring about a revolution in the field of mitochondrial medicine, also opening the possibility of better defining pathogenic mechanisms and developing novel therapeutic approaches for these devastating disorders. The canonical rules of mitochondrial medicine remain milestones, but novel issues have been raised following the use of advanced diagnostic technologies. Rigorous validation of the novel mutations detected using deep sequencing in patients with suspected MD, and a clear definition of the natural history, outcome measures, and biomarkers that could be usefully adopted in clinical trials, are mandatory goals for the scientific community. Today, therapy is often inadequate and mostly palliative. However, important advances have been made in treating some clinical entities, eg, mitochondrial neuro-gastrointestinal encephalomyopathy, for which approaches using allogeneic hematopoietic stem cell transplantation, orthotopic liver transplantation, and carrier erythrocyte entrapped thymidine phosphorylase enzyme therapy have recently been developed. Promising new treatment methods are being identified so that researchers, clinicians, and patients can join forces to change the history of these untreatable disorders. Keywords: mitochondrial diseases

  2. Trends in increasing gas-turbine units efficiency

    Science.gov (United States)

    Lebedev, A. S.; Kostennikov, S. V.

    2008-06-01

    A review of the latest models of gas-turbine units (GTUs) manufactured by leading firms of the world is given. With the example of units made by General Electric, Siemens, and Alstom, modern approaches to the problem of increasing the efficiency of gas-turbine units are dealt with. Basic principles of designing of moderate-size capacity gas turbine units are discussed, and comparison between characteristics of foreign-made GTUs belonging to this class and the advanced domestic GTE-65 unit is made.

  3. Advanced electron microscopy for advanced materials.

    Science.gov (United States)

    Van Tendeloo, Gustaaf; Bals, Sara; Van Aert, Sandra; Verbeeck, Jo; Van Dyck, Dirk

    2012-11-08

    The idea of this Review is to introduce newly developed possibilities of advanced electron microscopy to the materials science community. Over the last decade, electron microscopy has evolved into a full analytical tool, able to provide atomic scale information on the position, nature, and even the valency atoms. This information is classically obtained in two dimensions (2D), but can now also be obtained in 3D. We show examples of applications in the field of nanoparticles and interfaces.

  4. Advanced gas turbine systems program

    Energy Technology Data Exchange (ETDEWEB)

    Zeh, C.M.

    1995-06-01

    The U.S. Department of Energy (DOE) is sponsoring a program to develop fuel-efficient gas turbine-based power systems with low emissions. DOE`s Office of Fossil Energy (DOE/FE) and Office of Energy Efficiency and Renewable Energy (DOE/EE) have initiated an 8-year program to develop high-efficiency, natural gas-fired advanced gas turbine power systems. The Advanced Turbine Systems (ATS) Program will support full-scale prototype demonstration of both industrial- and utility-scale systems that will provide commercial marketplace entries by the year 2000. When the program targets are met, power system emissions will be lower than from the best technology in use today. Efficiency of the utility-scale units will be greater than 60 percent on a lower heating value basis, and emissions of carbon dioxide will be reduced inversely with this increase. Industrial systems will also see an improvement of at least 15 percent in efficiency. Nitrogen oxides will be reduced by at least 10 percent, and carbon monoxide and hydrocarbon emissions will each be kept below 20 parts per million, for both utility and industrial systems.

  5. Using SI Units in Astronomy

    Science.gov (United States)

    Dodd, Richard

    2011-12-01

    1. Introduction; 2. An introduction to SI units; 3. Dimensional analysis; 4. Unit of angular measure (radian); 5. Unit of time (second); 6. Unit of length (metre); 7. Unit of mass (kilogram); 8. Unit of luminous intensity (candela); 9. Unit of thermodynamic temperature (kelvin); 10. Unit of electric current (ampere); 11. Unit of amount of substance (mole); 12. Astronomical taxonomy; Index.

  6. [United theory of aging].

    Science.gov (United States)

    Trubitsyn, A G

    2012-01-01

    In attempts to develop a means of life prolongation the humankind has created more than three hundred theories of the aging; each of them offers the original cause of aging. However, none of them has given practical result by now. The majority of the theories have now only historical interest. There are several different theories that are mainly under consideration currently. They are based on reliable, proven evidence: the free radical theory, the protein error theory, the replicative senescence theory, the theory of reparation weakening, the immunological theory, several versions of neuroendocrinal theories, and programmed aging theory. The theory presented here is based on conception that the life as the phenomenon represents many of the interconnected physical and chemical processes propelled by energy of the mitochondrial bioenergetical machine. Gradual degradation of all vital processes is caused by the programmed decrease in level of bioenergetics. This theory unites all existing theories of aging constructed on authentic facts: it is shown, that such fundamental phenomena accompanying aging process as the increase in level of reactive oxygen species (ROS), the decrease in the general level of protein synthesis, the limitation of cellular dividing (Haiflick limit), decrease in efficiency of reparation mechanisms are caused by bioenergetics attenuation. Each of these phenomena in turn generates a number of harmful secondary processes. Any of the theories bases on one of these destructive phenomena or their combination. Hence, each of them describes one of sides of process of the aging initially caused by programmed decrease of level of bioenergetics. This united theory gives the chance to understand the nature of aging clock and explains a phenomenon of increase in longevity at the condition of food restriction. Failures of attempts to develop means from aging are explained by that the manipulations with the separate secondary phenomena of attenuation of

  7. Advanced healthcare materials

    CERN Document Server

    Tiwari, Ashutosh

    2014-01-01

    Advanced materials are attracting strong interest in the fundamental as well as applied sciences and are being extensively explored for their potential usage in a range of healthcare technological and biological applications. Advanced Healthcare Nanomaterials summarises the current status of knowledge in the fields of advanced materials for functional therapeutics, point-of-care diagnostics, translational materials, up and coming bio-engineering devices. The book highlights the key features which enable engineers to design stimuli-responsive smart nanoparticles, novel biomaterials, nan

  8. Advanced Aircraft Material

    Directory of Open Access Journals (Sweden)

    Vivek Kumar Prince

    2013-06-01

    Full Text Available There has been long debate on “advanced aircraft material” from past decades & researchers too came out with lots of new advanced material like composites and different aluminum alloys. Now days a new advancement that is in great talk is third generation Aluminum-lithium alloy. Newest Aluminum-lithium alloys are found out to have low density, higher elastic modulus, greater stiffness, greater cryogenic toughness, high resistance to fatigue cracking and improved corrosion resistance properties over the earlier used aircraft material as mentioned in Table 3 [1-5]. Comparison had been made with nowadays used composite material and is found out to be more superior then that

  9. Advanced Computer Typography.

    Science.gov (United States)

    1981-12-01

    ADVANCED COMPUTER TYPOGRAPHY .(U) DEC 81 A V HERSHEY UNCLASSIFIED NPS012-81-005 M MEEEIEEEII IIUJIL15I.4 MICROCQP RE SO.JjI ON ft R NPS012-81-005...NAVAL POSTGRADUATE SCHOOL 0Monterey, California DTIC SELECTEWA APR 5 1982 B ADVANCED COMPUTER TYPOGRAPHY by A. V. HERSHEY December 1981 OApproved for...Subtitle) S. TYPE Or REPORT & PERIOD COVERED Final ADVANCED COMPUTER TYPOGRAPHY Dec 1979 - Dec 1981 S. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(s) S CONTRACT

  10. Implementation of an Integrated Neuroscience Unit.

    Science.gov (United States)

    Breslin, Rory P; Franker, Lauren; Sterchi, Suzanne; Sani, Sepehr

    2016-02-01

    Many challenges exist in today's health care delivery system, and much focus and research are invested into ways to improve care with cost-effective measures. Specialty-specific dedicated care units are one solution for inpatient hospital care because they improve outcomes and decrease mortality. The neuroscience population encompasses a wide variety of diagnoses of spinal to cranial issues with a wide spectrum of needs varying from one patient to the next. Neuroscience care must be patient-specific during the course of frequent acuity changes, and one way to achieve this is through a neuroscience-focused unit. Few resources are available on how to implement this type of unit. Advanced practice nurses are committed to providing high-quality, safe, and cost-effective care and are instrumental in the success of instituting a unit dedicated to the care of neuroscience patients.

  11. Advanced Topics in Aerodynamics

    DEFF Research Database (Denmark)

    Filippone, Antonino

    1999-01-01

    "Advanced Topics in Aerodynamics" is a comprehensive electronic guide to aerodynamics,computational fluid dynamics, aeronautics, aerospace propulsion systems, design and relatedtechnology. We report data, tables, graphics, sketches,examples, results, photos, technical andscientific literature...

  12. Advanced Welding Concepts

    Science.gov (United States)

    Ding, Robert J.

    2010-01-01

    Four advanced welding techniques and their use in NASA are briefly reviewed in this poster presentation. The welding techniques reviewed are: Solid State Welding, Friction Stir Welding (FSW), Thermal Stir Welding (TSW) and Ultrasonic Stir Welding.

  13. Animal Production Research Advances

    African Journals Online (AJOL)

    Animal Production Research Advances is a peer-review journal established expressly to ... and wildlife, minilivestock, livestock farming systems and other disciplines. ... Selenium and tocopherol effects on parasitaemia, organ weights and ...

  14. Sustainable advanced construction technologies

    CSIR Research Space (South Africa)

    Kuchena, JC

    2009-11-01

    Full Text Available Advanced Construction Technologies (ACTs) are set to become the sustainable mainstay of the construction industry due to the demand for innovative housing solutions. Like most emerging economies, South Africa from a historical perspective and global...

  15. Advanced Chemistry Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Description/History: Chemistry laboratoryThe Advanced Chemistry Laboratory (ACL) is a unique facility designed for working with the most super toxic compounds known...

  16. Advanced urology nursing practice.

    Science.gov (United States)

    Crowe, Helen

    2014-03-01

    Urology nursing has developed as a specialty over the past few decades in response to several factors, workload demands being a prime reason. Nurses are taking on additional roles and activities including procedures such as cystoscopy and prostate biopsy, and running nurse-led clinics for a variety of urological conditions. Audits of advanced urological nursing practice have shown this care to be of a high standard and investigative procedures performed by these nurses match the diagnostic quality of existing services. Professional urological nursing organizations support the professional needs of these nurses, but the provision of education and training for advanced practice activities remains an unaddressed need. A range of confusing advanced urology nursing titles exists, and uncertainty regarding the roles and scope of practice for these nurses remains a concern. Acceptance and support from medical colleagues is required for the success of advanced urological nursing practice, but opinions on these roles remain divided.

  17. Advanced Microanalysis Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Microanalysis Facility fully integrates capabilities for chemical and structural analysis of electronic materials and devices for the U.S. Army and DoD....

  18. Advanced Light Source (ALS)

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Light Source (ALS), a world leader in soft x-ray science, generates light in the wavelengths needed for examining the atomic and electronic structure of...

  19. Advanced Topics in Aerodynamics

    DEFF Research Database (Denmark)

    Filippone, Antonino

    1999-01-01

    "Advanced Topics in Aerodynamics" is a comprehensive electronic guide to aerodynamics,computational fluid dynamics, aeronautics, aerospace propulsion systems, design and relatedtechnology. We report data, tables, graphics, sketches,examples, results, photos, technical andscientific literature...

  20. Advanced Missile Signature Center

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Missile Signature Center (AMSC) is a national facility supporting the Missile Defense Agency (MDA) and other DoD programs and customers with analysis,...

  1. Advanced walling systems

    CSIR Research Space (South Africa)

    De Villiers, A

    2010-01-01

    Full Text Available The question addressed by this chapter is: How should advanced walling systems be planned, designed, built, refurbished, and end their useful lives, to classify as smart, sustainable, green or eco-building environments?...

  2. Advanced Microanalysis Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Microanalysis Facility fully integrates capabilities for chemical and structural analysis of electronic materials and devices for the U.S. Army and DoD....

  3. Advance Payment ACO Model

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Advance Payment Model is designed for physician-based and rural providers who have come together voluntarily to give coordinated high quality care to the...

  4. Advances in atomic spectroscopy

    CERN Document Server

    Sneddon, J

    1997-01-01

    This series describes selected advances in the area of atomic spectroscopy. It is primarily intended for the reader who has a background in atmoic spectroscopy; suitable to the novice and expert. Although a widely used and accepted method for metal and non-metal analysis in a variety of complex samples, Advances in Atomic Spectroscopy covers a wide range of materials. Each Chapter will completely cover an area of atomic spectroscopy where rapid development has occurred.

  5. Joining of advanced materials

    CERN Document Server

    Messler, Robert W

    1993-01-01

    Provides an unusually complete and readable compilation of the primary and secondary options for joining conventional materials in non-conventional ways. Provides unique coverage of adhesive bonding using both organic and inorganic adhesives, cements and mortars. Focuses on materials issues without ignoring issues related to joint design, production processing, quality assurance, process economics, and joining performance in service.Joining of advanced materials is a unique treatment of joining of both conventional and advanced metals andalloys, intermetallics, ceramics, glasses, polymers, a

  6. Materials for advanced packaging

    CERN Document Server

    Wong, CP

    2008-01-01

    Significant progress has been made in advanced packaging in recent years. Several new packaging techniques have been developed and new packaging materials have been introduced. This book provides a comprehensive overview of the recent developments in this industry, particularly in the areas of microelectronics, optoelectronics, digital health, and bio-medical applications. The book discusses established techniques, as well as emerging technologies, in order to provide readers with the most up-to-date developments in advanced packaging.

  7. Advanced Stellar Compass

    DEFF Research Database (Denmark)

    Madsen, Peter Buch; Jørgensen, John Leif; Thuesen, Gøsta;

    1997-01-01

    This document describes all interface properties for the Advanced Stellar Compass, developed for the German Research Satellite "CHAMP". Basic operations, modes, software protocol, calibration methods and closed loop test strategies are described.......This document describes all interface properties for the Advanced Stellar Compass, developed for the German Research Satellite "CHAMP". Basic operations, modes, software protocol, calibration methods and closed loop test strategies are described....

  8. Advanced GPS Technologies (AGT)

    Science.gov (United States)

    2015-05-01

    V Air Force Research Laboratory ••• Advanced GPS Technologies (AGT) Integrity *Service *Excellence 1 May 2015 Kevin Slimak Program Manager...2015 2. REPORT TYPE 3. DATES COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE Advanced GPS Technologies (AGT) 5a. CONTRACT NUMBER 5b...DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the GPS Partnership

  9. Advanced Welding Applications

    Science.gov (United States)

    Ding, Robert J.

    2010-01-01

    Some of the applications of advanced welding techniques are shown in this poster presentation. Included are brief explanations of the use on the Ares I and Ares V launch vehicle and on the Space Shuttle Launch vehicle. Also included are microstructural views from four advanced welding techniques: Variable Polarity Plasma Arc (VPPA) weld (fusion), self-reacting friction stir welding (SR-FSW), conventional FSW, and Tube Socket Weld (TSW) on aluminum.

  10. Advances in Cancer Therapy

    OpenAIRE

    Jordan BF, Sonveaux P

    2011-01-01

    The book "Advances in Cancer Therapy" is a new addition to the Intech collection of books and aims at providing scientists and clinicians with a comprehensive overview of the state of current knowledge and latest research findings in the area of cancer therapy. For this purpose research articles, clinical investigations and review papers that are thought to improve the readers' understanding of cancer therapy developments and/or to keep them up to date with the most recent advances in this fi...

  11. Advances in bistatic radar

    CERN Document Server

    Willis, Nick

    2007-01-01

    Advances in Bistatic Radar updates and extends bistatic and multistatic radar developments since publication of Willis' Bistatic Radar in 1991. New and recently declassified military applications are documented. Civil applications are detailed including commercial and scientific systems. Leading radar engineers provide expertise to each of these applications. Advances in Bistatic Radar consists of two major sections: Bistatic/Multistatic Radar Systems and Bistatic Clutter and Signal Processing. Starting with a history update, the first section documents the early and now declassified military

  12. Advances in atomic spectroscopy

    CERN Document Server

    Sneddon, J

    1995-01-01

    This series describes selected advances in the area of atomic spectroscopy. It is promarily intended for the reader who has a background in atmoic spectroscopy; suitable to the novice and expert. Although a widely used and accepted method for metal and non-metal analysis in a variety of complex samples, Advances in Atomic Spectroscopy covers a wide range of materials. Each Chapter will completely cover an area of atomic spectroscopy where rapid development has occurred.

  13. An advance triage system.

    Science.gov (United States)

    Cheung, W W H; Heeney, L; Pound, J L

    2002-01-01

    This paper describes the redesign of the triage process in an Emergency Department with the purpose of improving the patient flow and thus increasing patient satisfaction through the reduction of the overall length of stay. The process, Advance Triage, allows the triage nurse to initiate diagnostic protocols for frequently occurring medical problems based on physician-approved algorithms. With staff and physician involvement and medical specialist approval, nine Advance Triage algorithms were developed-abdominal pain, eye trauma, chest pain, gynaecological symptoms, substance abuse, orthopaedic trauma, minor trauma, paediatric fever and paediatric emergent. A comprehensive educational program was provided to the triage nurses and Advance Triage was initiated. A process was established at one year to evaluate the effectiveness of the Advance Triage System. The average length of stay was found to be 46 min less for all patients who were advance triaged with the greatest time-saving of 76 min for patients in the 'Urgent' category. The most significant saving was realized in the patient's length of stay (LOS) after the Emergency Physician assessed them because diagnostic results, available during the initial patient assessment, allowed treatment decisions to be made at that time. Advance Triage utilizes patient waiting time efficiently and increases the nurses' and physicians' job satisfaction.

  14. Advanced Situation Awareness Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Situation Awareness Technologies (ASAT) will facilitate exploration of the moon surface, and other planetary bodies. ASAT will create an Advanced Situation...

  15. Psychiatric Advance Directives: Getting Started

    Science.gov (United States)

    ... More... Home Getting Started National Resource Center on Psychiatric Advance Directives - Getting Started Getting Started Psychiatric advance directives (PADs) are relatively new legal instruments ...

  16. [Capacity problems in Danish intensive care units?].

    Science.gov (United States)

    Espersen, Kurt; Antonsen, Kristian; Joensen, Henning

    2007-02-19

    There are documented capacity problems in Danish ICUs. The indications for intensive care have increased in the last decade without any increase in the number of ICU beds. The result is massive pressure on many ICUs and many negative consequences in relation to healthcare, healthcare economics and patient comfort. Possible solutions: 1) an increase in the number of ICU beds, 2) re-organization of Danish ICUs into larger units and 3) creation of "step-down"-units. Intensive care is a costly area in the healthcare system, where there must be distinct guidelines for visitation and use of expensive medicine and advanced technology.

  17. Malaria Treatment (United States)

    Science.gov (United States)

    ... a CDC Malaria Branch clinician. malaria@cdc.gov Malaria Treatment (United States) Recommend on Facebook Tweet Share Compartir Treatment of Malaria: Guidelines For Clinicians (United States) Download PDF version ...

  18. United Cerebral Palsy

    Science.gov (United States)

    ... be sure to follow us on Twitter . United Cerebral Palsy UCP educates, advocates and provides support services to ... Partners Merz Logo Sprint Relay Copyright © 2015 United Cerebral Palsy 1825 K Street NW Suite 600 Washington, DC ...

  19. Unit Cost Compendium Calculations

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Unit Cost Compendium (UCC) Calculations raw data set was designed to provide for greater accuracy and consistency in the use of unit costs across the USEPA...

  20. Advanced Stirling Convertor (ASC) Technology Maturation

    Science.gov (United States)

    Wong, Wayne A.; Wilson, Scott; Collins, Josh; Wilson, Kyle

    2016-01-01

    The Advanced Stirling Convertor (ASC) development effort was initiated by NASA Glenn Research Center with contractor Sunpower, Inc., to develop high-efficiency thermal-to-electric power conversion technology for NASA Radioisotope Power Systems (RPSs). Early successful performance demonstrations led to the expansion of the project as well as adoption of the technology by the Department of Energy (DOE) and system integration contractor Lockheed Martin Space Systems Company as part of the Advanced Stirling Radioisotope Generator (ASRG) flight project. The ASRG integrates a pair of ASCs to convert the heat from a pair of General Purpose Heat Source (GPHS) modules into electrical power. The expanded NASA ASC effort included development of several generations of ASC prototypes or engineering units to help prepare the ASC technology and Sunpower for flight implementation. Sunpower later had two parallel contracts allowing the last of the NASA engineering units called ASC-E3 to serve as pathfinders for the ASC-F flight convertors being built for DOE. The ASC-E3 convertors utilized the ASC-F flight specifications and were built using the ASC-F design and process documentation. Shortly after the first ASC-F pair achieved initial operation, due to budget constraints, the DOE ASRG flight development contract was terminated. NASA continues to invest in the development of Stirling RPS technology including continued production of the ASC-E3 convertors, seven of which have been delivered with one additional unit in production. Starting in fiscal year 2015, Stirling Convertor Technology Maturation has been reorganized as an element of the RPS Stirling Cycle Technology Development (SCTD) Project and long-term plans for continued Stirling technology advancement are in reformulation. This paper provides a status on the ASC project, an overview of advancements made in the design and production of the ASC at Sunpower, and a summary of acceptance tests, reliability tests, and tactical

  1. ADVANCED WORKER PROTECTION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Judson Hedgehock

    2001-03-16

    From 1993 to 2000, OSS worked under a cost share contract from the Department of Energy (DOE) to develop an Advanced Worker Protection System (AWPS). The AWPS is a protective ensemble that provides the user with both breathing air and cooling for a NIOSH-rated duration of two hours. The ensemble consists of a liquid air based backpack, a Liquid Cooling Garment (LCG), and an outer protective garment. The AWPS project was divided into two phases. During Phase 1, OSS developed and tested a full-scale prototype AWPS. The testing showed that workers using the AWPS could work twice as long as workers using a standard SCBA. The testing also provided performance data on the AWPS in different environments that was used during Phase 2 to optimize the design. During Phase 1, OSS also performed a life-cycle cost analysis on a representative clean up effort. The analysis indicated that the AWPS could save the DOE millions of dollars on D and D activities and improve the health and safety of their workers. During Phase 2, OSS worked to optimize the AWPS design to increase system reliability, to improve system performance and comfort, and to reduce the backpack weight and manufacturing costs. To support this design effort, OSS developed and tested several different generations of prototype units. Two separate successful evaluations of the ensemble were performed by the International Union of Operation Engineers (IUOE). The results of these evaluations were used to drive the design. During Phase 2, OSS also pursued certifying the AWPS with the applicable government agencies. The initial intent during Phase 2 was to finalize the design and then to certify the system. OSS and Scott Health and Safety Products teamed to optimize the AWPS design and then certify the system with the National Institute of Occupational Health and Safety (NIOSH). Unfortunately, technical and programmatic difficulties prevented us from obtaining NIOSH certification. Despite the inability of NIOSH to certify

  2. Recruit and ADVANCE

    Science.gov (United States)

    Rosser, Sue V.

    2007-04-01

    Beginning in 2001, the National Science Foundation launched the ADVANCE Initiative, which has now awarded more than 70 million to some thirty institutions for transformations to advance women. Results of studies on how to attract and retain women students and faculty underpinned our ADVANCE Institutional Transformation grant funded by the NSF for 3.7 million for five years, beginning in 2001. As co-principal investigator on this grant, I insured that this research informed the five major threads of the grant: 1) Four termed ADVANCE professors to mentor junior women faculty in each college; 2) Collection of MIT-Report-like data indicators to assess whether advancement of women really occurs during and after the institutional transformation undertaken through ADVANCE; 3) Family-friendly policies and practices to stop the tenure clock and provide active service, modified duties, lactation stations and day care; 4) Mini-retreats to facilitate access for tenure-track women faculty to male decision-makers and administrators for informal conversations and discussion on topics important to women faculty; 5) Removal of subtle gender, racial, and other biases in promotion and tenure. The dynamic changes resulting from the grant in quality of mentoring, new understanding of promotion and tenure, numbers of women retained and given endowed chairs, and emergence of new family friendly policies gave me hope for genuine diversification of leadership in science and technology. As the grant funding ends, the absence of NSF prestige and monitoring, coupled with a change in academic leadership at the top, provide new challenges for institutionalization, recruitment, and advancement of women into leadership positions in science and engineering.

  3. Advanced Prototype Fan Operating Experience, Post Test Evaluation, and Refurbishment for PLSS 2.0 Test Use

    Science.gov (United States)

    Hodgson, Edward; Oehler, William; Dionne, Steve; Converse, David; Jennings, Mallory A.

    2012-01-01

    NASA s plans for Extravehicular Activity (EVA) portable life support systems for future exploration missions result in different design requirements than those which led to the combined fan / pump / separator in the current ISS Extravehicular Mobility Unit (EMU). To meet these new requirements, NASA contracted with Hamilton Sundstrand to provide two new prototype fans designed to meet anticipated future system requirements. Based on design trade studies, a high speed fan with mechanical bearing support of the rotating elements and a novel non-metallic barrier canned motor design was developed and implemented in the deliverable prototypes. The prototypes, which used two different bearing lubricants, have been extensively tested in both stand-alone and integrated system tests in NASA laboratories and proven to meet the anticipated performance requirements. Subsequently, they have been subjected to post test inspection and analysis in Hamilton Sundstrand laboratories to assess the effects of integrated operation and resultant exposure to vent loop contaminants. Results have confirmed expectations that one of the lubricants would be superior in this application and the prototype fans have been reassembled with new bearings with the superior lubricant. They have now been returned to the Johnson Space Center for further testing and maturation as part of NASA s PLSS 2.0 integrated test effort. This paper will discuss the test history of these units, resulting test data, the results of post test evaluation, and plans for further testing in the near future.

  4. Establishing the Intermediate Unit.

    Science.gov (United States)

    Pennsylvania State Dept. of Education, Harrisburg.

    The State of Pennsylvania Act 102 establishes a system of 29 intermediate units, creates intermediate unit boards of directors, spells out their duties and functions, and provides a system of financing their operations. This handbook has been prepared by the Pennsylvania Department of Education to provide intermediate unit boards of directors,…

  5. Unitals in Projective Planes

    CERN Document Server

    Barwick, Susan

    2008-01-01

    Unitals are key structures in projective planes, and have connections with other structures in algebra. This book presents a monograph on unitals embedded in finite projective planes. It offers a survey of the research literature on embedded unitals. It is suitable for graduate students and researchers who want to learn about this topic

  6. Advances in business ICT

    CERN Document Server

    Pełech-Pilichowski, Tomasz

    2014-01-01

    Futurists and scientists alike profess the coming of a new era in the history – the knowledge era. The notion of knowledge is as old as humans’ self-consciousness, but new challenges appear. The meaning of the word “knowledge” is changing from cognitive notion to a technical term denoting a structured economic resource to be actively managed. This contributed volume is a result of vivid and extremely valuable discussions held at 3rd International Workshop on Advances in Business ICT (ABICT) in Wrocław, Poland, September 9-12, 2012. The workshop focused on Advances in Business ICT approached from a multidisciplinary perspective. It provided an international forum for scientists/experts from academia and industry to discuss and exchange current results, applications, new ideas of ongoing research and experience on all aspects of Business Intelligence. ABICT has also been an opportunity to demonstrate different ideas and tools for developing and supporting organizational creativity, as well as advances ...

  7. Advanced Magnetic Nanostructures

    CERN Document Server

    Sellmyer, David

    2006-01-01

    Advanced Magnetic Nanostructures is devoted to the fabrication, characterization, experimental investigation, theoretical understanding, and utilization of advanced magnetic nanostructures. Focus is on various types of 'bottom-up' and 'top-down' artificial nanostructures, as contrasted to naturally occurring magnetic nanostructures, such as iron-oxide inclusions in magnetic rocks, and to structures such as perfect thin films. Chapter 1 is an introduction into some basic concepts, such as the definitions of basic magnetic quantities. Chapters 2-4 are devoted to the theory of magnetic nanostructures, Chapter 5 deals with the characterization of the structures, and Chapters 6-10 are devoted to specific systems. Applications of advanced magnetic nanostructures are discussed in Chapters11-15 and, finally, the appendix lists and briefly discusses magnetic properties of typical starting materials. Industrial and academic researchers in magnetism and related areas such as nanotechnology, materials science, and theore...

  8. Advanced Hydrogen Turbine Development

    Energy Technology Data Exchange (ETDEWEB)

    Marra, John [Siemens Energy, Inc., Orlando, FL (United States)

    2015-09-30

    Under the sponsorship of the U.S. Department of Energy (DOE) National Energy Technology Laboratories, Siemens has completed the Advanced Hydrogen Turbine Development Program to develop an advanced gas turbine for incorporation into future coal-based Integrated Gasification Combined Cycle (IGCC) plants. All the scheduled DOE Milestones were completed and significant technical progress was made in the development of new technologies and concepts. Advanced computer simulations and modeling, as well as subscale, full scale laboratory, rig and engine testing were utilized to evaluate and select concepts for further development. Program Requirements of: A 3 to 5 percentage point improvement in overall plant combined cycle efficiency when compared to the reference baseline plant; 20 to 30 percent reduction in overall plant capital cost when compared to the reference baseline plant; and NOx emissions of 2 PPM out of the stack. were all met. The program was completed on schedule and within the allotted budget

  9. Advanced flip chip packaging

    CERN Document Server

    Lai, Yi-Shao; Wong, CP

    2013-01-01

    Advanced Flip Chip Packaging presents past, present and future advances and trends in areas such as substrate technology, material development, and assembly processes. Flip chip packaging is now in widespread use in computing, communications, consumer and automotive electronics, and the demand for flip chip technology is continuing to grow in order to meet the need for products that offer better performance, are smaller, and are environmentally sustainable. This book also: Offers broad-ranging chapters with a focus on IC-package-system integration Provides viewpoints from leading industry executives and experts Details state-of-the-art achievements in process technologies and scientific research Presents a clear development history and touches on trends in the industry while also discussing up-to-date technology information Advanced Flip Chip Packaging is an ideal book for engineers, researchers, and graduate students interested in the field of flip chip packaging.

  10. Advanced servomanipulator development

    Energy Technology Data Exchange (ETDEWEB)

    Kuban, D.P.

    1985-01-01

    The Advanced Servomanipulator (ASM) System consists of three major components: the ASM slave, the dual arm master controller (DAMC) or master, and the control system. The ASM is remotely maintainable force-reflecting servomanipulator developed at the Oak Ridge National Laboratory (ORNL) as part of the Consolidated Fuel Reprocessing Program. This new manipulator addresses requirements of advanced nuclear fuel reprocessing with emphasis on force reflection, remote maintainability, reliability, radiation tolerance, and corrosion resistance. The advanced servomanipulator is uniquely subdivided into remotely replaceable modules which will permit in situ manipulator repair by spare module replacement. Manipulator modularization and increased reliability are accomplished through a force transmission system that uses gears and torque tubes. Digital control algorithms and mechanical precision are used to offset the increased backlash, friction, and inertia resulting from the gear drives. This results in the first remotely maintainable force-reflecting servomanipulator in the world.

  11. Advancement & Promotion Review: 2003

    CERN Multimedia

    2003-01-01

    Advancement, exceptional advancement and promotion decisions were made at the end of June, following the procedures published in Weekly Bulletin No. 13/2003. These decisions were included, where applicable, in the salaries for the month of July 2003. The award of the periodic step was communicated to staff by the salary shown on the July salary slip. All other decisions are communicated by separate notification. The names of staff receiving exceptional advancements or promotions are now published on the HR Division website and are accessible for consultation only at the following address: http://cern.ch/hr-div/internal/personnel/advlist_2003.asp It is recalled that change of career path proposals submitted to the Technical Engineers and Administrative Careers Committee (TEACC) or to Human Resources Division are being examined with a view to preparing the latters' recommendations by the end of September 2003. Final decisions will be applied retroactively to 1 July 2003. Human Resources Division Tel:...

  12. ADVANCEMENT & PROMOTION REVIEW: 2002

    CERN Multimedia

    2002-01-01

    Advancement, exceptional advancement and promotion decisions were made at the beginning of July, under the new career structure scheme and following the procedures published in Weekly Bulletin No. 11/2002. These decisions were included, where applicable, in the salaries for the month of July 2002. The award of the periodic step was communicated to staff by the salary shown on the July salary slip. All other decisions are communicated by separate notification. The names of staff receiving exceptional advancements or promotions will be published this year on the HR Division website and are accessible for consultation only at the following address : http://cern.ch/hr-div/internal/personnel/advlist.asp It is recalled that change of career path proposals submitted to the Technical Engineers and Administrative Careers Committee (TEACC) or to Human Resources Division are being examined with a view to preparing the latters' recommendations by the end of September 2002. Final decisions will be applied retroactivel...

  13. Advanced fuel chemistry for advanced engines.

    Energy Technology Data Exchange (ETDEWEB)

    Taatjes, Craig A.; Jusinski, Leonard E.; Zador, Judit; Fernandes, Ravi X.; Miller, James A.

    2009-09-01

    Autoignition chemistry is central to predictive modeling of many advanced engine designs that combine high efficiency and low inherent pollutant emissions. This chemistry, and especially its pressure dependence, is poorly known for fuels derived from heavy petroleum and for biofuels, both of which are becoming increasingly prominent in the nation's fuel stream. We have investigated the pressure dependence of key ignition reactions for a series of molecules representative of non-traditional and alternative fuels. These investigations combined experimental characterization of hydroxyl radical production in well-controlled photolytically initiated oxidation and a hybrid modeling strategy that linked detailed quantum chemistry and computational kinetics of critical reactions with rate-equation models of the global chemical system. Comprehensive mechanisms for autoignition generally ignore the pressure dependence of branching fractions in the important alkyl + O{sub 2} reaction systems; however we have demonstrated that pressure-dependent 'formally direct' pathways persist at in-cylinder pressures.

  14. Avionics advanced development strategy

    Science.gov (United States)

    Dyer, D.

    1990-01-01

    Discussed here is the problem of how to put together an integrated, phased, and affordable avionics advanced development program that links and applies to operational, evolving, and developing programs/vehicles, as well as those in the planning phases. Collecting technology needs from individual programs/vehicles and proposed technology items from individual developers usually results in a mismatch and something that is unaffordable. A strategy to address this problem is outlined with task definitions which will lead to avionics advanced development items that will fit within an overall framework, prioritized to support budgeting, and support the scope of NASA space transportations needs.

  15. Advances in attosecond science

    Science.gov (United States)

    Calegari, Francesca; Sansone, Giuseppe; Stagira, Salvatore; Vozzi, Caterina; Nisoli, Mauro

    2016-03-01

    Attosecond science offers formidable tools for the investigation of electronic processes at the heart of important physical processes in atomic, molecular and solid-state physics. In the last 15 years impressive advances have been obtained from both the experimental and theoretical points of view. Attosecond pulses, in the form of isolated pulses or of trains of pulses, are now routinely available in various laboratories. In this review recent advances in attosecond science are reported and important applications are discussed. After a brief presentation of various techniques that can be employed for the generation and diagnosis of sub-femtosecond pulses, various applications are reported in atomic, molecular and condensed-matter physics.

  16. Advances in quantum chemistry

    CERN Document Server

    Sabin, John R

    2013-01-01

    Advances in Quantum Chemistry presents surveys of current topics in this rapidly developing field that has emerged at the cross section of the historically established areas of mathematics, physics, chemistry, and biology. It features detailed reviews written by leading international researchers. This volume focuses on the theory of heavy ion physics in medicine.Advances in Quantum Chemistry presents surveys of current topics in this rapidly developing field that has emerged at the cross section of the historically established areas of mathematics, physics, chemistry, and biology. It features

  17. Advanced Techniques in Biophysics

    CERN Document Server

    Arrondo, José Luis R

    2006-01-01

    Technical advancements are basic elements in our life. In biophysical studies, new applications and improvements in well-established techniques are being implemented every day. This book deals with advancements produced not only from a technical point of view, but also from new approaches that are being taken in the study of biophysical samples, such as nanotechniques or single-cell measurements. This book constitutes a privileged observatory for reviewing novel applications of biophysical techniques that can help the reader enter an area where the technology is progressing quickly and where a comprehensive explanation is not always to be found.

  18. Advances in catalysis

    CERN Document Server

    Gates, Bruce C

    2012-01-01

    Advances in Catalysis fills the gap between the journal papers and the textbooks across the diverse areas of catalysis research. For more than 60 years Advances in Catalysis has been dedicated to recording progress in the field of catalysis and providing the scientific community with comprehensive and authoritative reviews. This series in invaluable to chemical engineers, physical chemists, biochemists, researchers and industrial chemists working in the fields of catalysis and materials chemistry. * In-depth, critical, state-of-the-art reviews * Comprehensive, covers of all as

  19. Advanced Surface Technology

    DEFF Research Database (Denmark)

    Møller, Per; Nielsen, Lars Pleht

    This new significant book on advanced modern surface technology in all its variations, is aimed at both teaching at engineering schools and practical application in industry. The work covers all the significant aspects of modern surface technology and also describes how new advanced techniques make......, nitriding, carbonitriding, and many other lesser-known thermochemical processes used for solving technological problems. The book is richly illustrated with pictures and figures showing how the technology creates new innovative solutions for industry and how surfaces are becoming integral to the function...

  20. Advanced router architectures

    CERN Document Server

    Kloth, Axel K

    2005-01-01

    Routers, switches, and transmission equipment form the backbone of the Internet, yet many users and service technicians do not understand how these nodes really work.Advanced Router Architectures addresses how components of advanced routers work together and how they are integrated with each other. This book provides the background behind why these building blocks perform certain functions, and how the function is implemented in general use. It offers an introduction to the subject matter that is intended to trigger deeper interest from the reader. The book explains, for example, why traffic m

  1. Advanced higher English

    CERN Document Server

    Bridges, Ann

    2016-01-01

    The only book to support the compulsory Textual Analysis component of Advanced Higher English. Written by subject experts, this book contains short extracts of prose fiction, non-fiction, poetry and drama with analysis and commentary to assist students' understanding and their ability to critically assess their reading of literature. Short writing tasks, linked to the analysis of particular techniques, help to develop aspects of creative writing skills. The Textual Analysis component forms a compulsory section of the Advanced Higher English syllabus and accounts for 20% of the final grade;

  2. Advances in periodontology.

    Science.gov (United States)

    Tonetti, M S

    2000-10-01

    Advances in periodontal science and practice over the last decade have radically changed the understanding of periodontal diseases and have opened new, exciting prospects for both medical and surgical therapy of periodontal diseases. Establishment of the aetiology and pathogenesis of periodontitis, understanding of the unique genetic and environmental susceptibility profile of affected subjects, and recognition of the systemic implications of periodontal infections are the key research findings. The use of randomised, controlled, clinical trials has allowed the development of evidence-based periodontology. Adjunctive antimicrobial therapy, regenerative periodontal surgery, periodontal plastic surgery, bone regeneration surgery in the light of implant treatment, and advanced soft tissue management at implant sites have radically changed practice.

  3. Advances in catalysis

    CERN Document Server

    Jentoft, Friederike C

    2014-01-01

    Advances in Catalysis fills the gap between the journal papers and the textbooks across the diverse areas of catalysis research. For more than 60 years Advances in Catalysis has been dedicated to recording progress in the field of catalysis and providing the scientific community with comprehensive and authoritative reviews. This series is invaluable to chemical engineers and chemists working in the field of catalysis in academia or industry. Authoritative reviews written by experts in the field. Topics selected to reflect progress of the field. Insightful and critical articles, fully edite

  4. Advanced linear algebra

    CERN Document Server

    Cooperstein, Bruce

    2015-01-01

    Advanced Linear Algebra, Second Edition takes a gentle approach that starts with familiar concepts and then gradually builds to deeper results. Each section begins with an outline of previously introduced concepts and results necessary for mastering the new material. By reviewing what students need to know before moving forward, the text builds a solid foundation upon which to progress. The new edition of this successful text focuses on vector spaces and the maps between them that preserve their structure (linear transformations). Designed for advanced undergraduate and beginning graduate stud

  5. Advances in chemical physics

    CERN Document Server

    Rice, Stuart A

    2014-01-01

    Advances in Chemical Physics is the only series of volumes available that explores the cutting edge of research in chemical physics. This is the only series of volumes available that presents the cutting edge of research in chemical physics.Includes contributions from experts in this field of research.Contains a representative cross-section of research that questions established thinking on chemical solutions.Structured with an editorial framework that makes the book an excellent supplement to an advanced graduate class in physical chemistry or chemical physics.

  6. Advanced Magnetic Metrology Instrumentation

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The extraordinary progress in magnetic peripheral storage systems has been fueled by the ad vancements in heads (MR, GMR, spin valves) and in very high coercivity, Iow remanence thickness product (Mrt) media. These advancements are imposing new performance require ments on the magnetometers (VSMs) used to characterize these materials. At the same time, they have introduced a new paradigm for in-process (nondestructive, robotic) magnetic metrol ogy tools to assure the stringent product uniformity requirements. In this paper, we discuss the recent advancements in magnetometry for characterizing state-of-the-art media and heads, as well as other magnetic materials.

  7. Advanced number theory

    CERN Document Server

    Cohn, Harvey

    1980-01-01

    ""A very stimulating book ... in a class by itself."" - American Mathematical MonthlyAdvanced students, mathematicians and number theorists will welcome this stimulating treatment of advanced number theory, which approaches the complex topic of algebraic number theory from a historical standpoint, taking pains to show the reader how concepts, definitions and theories have evolved during the last two centuries. Moreover, the book abounds with numerical examples and more concrete, specific theorems than are found in most contemporary treatments of the subject.The book is divided into three parts

  8. Advances in microwaves 3

    CERN Document Server

    Young, Leo

    2013-01-01

    Advances in Microwaves, Volume 3 covers the advances and applications of microwave signal transmission and Gunn devices. This volume contains six chapters and begins with descriptions of ground-station antennas for space communications. The succeeding chapters deal with beam waveguides, which offer interesting possibilities for transmitting microwave energy, as well as with parallel or tubular beams from antenna apertures. A chapter discusses the electron transfer mechanism and the velocity-field characteristics, with a particular emphasis on the microwave properties of Gunn oscillators. The l

  9. Sensors and Actuators for the Advanced LIGO Mirror Suspensions

    CERN Document Server

    Carbone, L; Cutler, R M; Freise, A; Greenhalgh, J; Heefner, J; Hoyland, D; Lockerbie, N A; Lodhia, D; Robertson, N A; Speake, C C; Strain, K A; Vecchio, A; 10.1088/0264-9381/29/11/115005

    2012-01-01

    We have developed, produced and characterised integrated sensors, actuators and the related read-out and drive electronics that will be used for the control of the Advanced LIGO suspensions. The overall system consists of the BOSEMs (displacement sensor with integrated electro-magnetic actuator), the satellite boxes (BOSEM readout and interface electronics) and six different types of coil-driver units. In this paper we present the design of this read-out and control system, we discuss the related performance relevant for the Advanced LIGO suspensions, and we report on the experimental activity finalised at the production of the instruments for the Advanced LIGO detectors.

  10. Advances and Applications for Geodesy

    Science.gov (United States)

    Calais, Eric; Schwartz, Susan; Arrowsmith, Ramon

    2010-07-01

    2010 UNAVCO Science Workshop; Boulder, Colorado, 8-11 March 2010; Geodesy's reach has expanded rapidly in recent years as EarthScope and international data sets have grown and new disciplinary applications have emerged. To explore advances in geodesy and its applications in geoscience research and education, approximately 170 scientists (representing 11 countries: Colombia, Denmark, Ecuador, France, Japan, Lebanon, Mexico, New Zealand, Russia, Spain, and the United States), including 15 students, gathered at the 2010 UNAVCO Science Workshop in Colorado. UNAVCO is a nonprofit membership-governed consortium that facilitates geoscience research and education using geodesy. Plenary sessions integrated discovery with broad impact and viewed geodesy through three lenses: (1) pixel-by-pixel geodetic imaging where various remote sensing methodologies are revealing fine-scale changes in the near-surface environment and the geologic processes responsible for them; (2) epoch-by-epoch deformation time series measured in seconds to millennia, which are uncovering ephemeral processes associated with the earthquake cycle and glacial and groundwater flow; and (3) emerging observational powers from advancing geodetic technologies. A fourth plenary session dealt with geodesy and water, a new strategic focus on the hydrosphere, cryosphere, and changing climate. Keynotes included a historical perspective by Bernard Minster (Scripps Institution of Oceanography) on space geodesy and its applications to geophysics, and a summary talk by Susan Eriksson (UNAVCO) on the successes of Research Experience in Solid Earth Science for Students (RESESS) and its 5-year follow-on with opportunities to mentor the next generation of geoscientists through cultivation of diversity.

  11. Advanced Metering Installations – A Perspective from Federal Sites

    Energy Technology Data Exchange (ETDEWEB)

    Earni, Shankar [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Technologies Area

    2016-05-02

    This report is intended to provide guidance to the United States Department of Energy (DOE) and other federal agencies to highlight some of the existing practices related to advanced building metering systems. This study identified some of the existing actions related to advanced meter data and proposes how advanced metered data can be employed to develop robust cost effective measurement and verification (M&V) strategies. This report proposes an integrated framework on how advanced meter data can be used to identify energy conservation opportunities and to develop proactive M&V strategies to ensure that the savings for energy projects are being realized. This information will help improve metering, feedback, and dashboard implementations for reducing energy use at DOE facilities, based on lessons learned from various advanced metering implementations.

  12. ADVANCED RECIPROCATING COMPRESSION TECHNOLOGY (ARCT)

    Energy Technology Data Exchange (ETDEWEB)

    Danny M. Deffenbaugh; Klaus Brun; Ralph E. Harris; J. Pete Harrell; Robert J. Mckee; J. Jeffrey Moore; Steven J. Svedeman; Anthony J. Smalley; Eugene L. Broerman; Robert A Hart; Marybeth G. Nored; Ryan S. Gernentz; Shane P. Siebenaler

    2005-12-01

    The U.S. natural gas pipeline industry is facing the twin challenges of increased flexibility and capacity expansion. To meet these challenges, the industry requires improved choices in gas compression to address new construction and enhancement of the currently installed infrastructure. The current fleet of installed reciprocating compression is primarily slow-speed integral machines. Most new reciprocating compression is and will be large, high-speed separable units. The major challenges with the fleet of slow-speed integral machines are: limited flexibility and a large range in performance. In an attempt to increase flexibility, many operators are choosing to single-act cylinders, which are causing reduced reliability and integrity. While the best performing units in the fleet exhibit thermal efficiencies between 90% and 92%, the low performers are running down to 50% with the mean at about 80%. The major cause for this large disparity is due to installation losses in the pulsation control system. In the better performers, the losses are about evenly split between installation losses and valve losses. The major challenges for high-speed machines are: cylinder nozzle pulsations, mechanical vibrations due to cylinder stretch, short valve life, and low thermal performance. To shift nozzle pulsation to higher orders, nozzles are shortened, and to dampen the amplitudes, orifices are added. The shortened nozzles result in mechanical coupling with the cylinder, thereby, causing increased vibration due to the cylinder stretch mode. Valve life is even shorter than for slow speeds and can be on the order of a few months. The thermal efficiency is 10% to 15% lower than slow-speed equipment with the best performance in the 75% to 80% range. The goal of this advanced reciprocating compression program is to develop the technology for both high speed and low speed compression that will expand unit flexibility, increase thermal efficiency, and increase reliability and integrity

  13. Freestanding midwifery units versus obstetric units

    DEFF Research Database (Denmark)

    Overgaard, Charlotte; Fenger-Grøn, Morten; Sandall, Jane

    2012-01-01

    women intending to give birth in two freestanding midwifery units (FMU) versus two obstetric units in Denmark differed by level of social disadvantage Methods The study was designed as a cohort study with a matched control group. It included 839 lowrisk women intending to give birth in an FMU, who were...... prospectively and individually matched on nine selected obstetric/socio-economic factors to 839 low-risk women intending OU birth. Educational level was chosen as a proxy for social position. Analysis was by intention-to-treat. Results Women intending to give birth in an FMU had a significantly higher...

  14. Advanced Space Fission Propulsion Systems

    Science.gov (United States)

    Houts, Michael G.; Borowski, Stanley K.

    2010-01-01

    Fission has been considered for in-space propulsion since the 1940s. Nuclear Thermal Propulsion (NTP) systems underwent extensive development from 1955-1973, completing 20 full power ground tests and achieving specific impulses nearly twice that of the best chemical propulsion systems. Space fission power systems (which may eventually enable Nuclear Electric Propulsion) have been flown in space by both the United States and the Former Soviet Union. Fission is the most developed and understood of the nuclear propulsion options (e.g. fission, fusion, antimatter, etc.), and fission has enjoyed tremendous terrestrial success for nearly 7 decades. Current space nuclear research and technology efforts are focused on devising and developing first generation systems that are safe, reliable and affordable. For propulsion, the focus is on nuclear thermal rockets that build on technologies and systems developed and tested under the Rover/NERVA and related programs from the Apollo era. NTP Affordability is achieved through use of previously developed fuels and materials, modern analytical techniques and test strategies, and development of a small engine for ground and flight technology demonstration. Initial NTP systems will be capable of achieving an Isp of 900 s at a relatively high thrust-to-weight ratio. The development and use of first generation space fission power and propulsion systems will provide new, game changing capabilities for NASA. In addition, development and use of these systems will provide the foundation for developing extremely advanced power and propulsion systems capable of routinely and affordably accessing any point in the solar system. The energy density of fissile fuel (8 x 10(exp 13) Joules/kg) is more than adequate for enabling extensive exploration and utilization of the solar system. For space fission propulsion systems, the key is converting the virtually unlimited energy of fission into thrust at the desired specific impulse and thrust

  15. Advances in Computer Entertainment.

    NARCIS (Netherlands)

    Nijholt, Antinus; Romão, T.; Reidsma, Dennis; Unknown, [Unknown

    2012-01-01

    These are the proceedings of the 9th International Conference on Advances in Computer Entertainment ACE 2012). ACE has become the leading scientific forum for dissemination of cutting-edge research results in the area of entertainment computing. Interactive entertainment is one of the most vibrant

  16. Technological advances transforming rheumatology

    Science.gov (United States)

    Robinson, William H.; Mao, Rong

    2016-01-01

    Technological advances over the past decade have revolutionized many areas of rheumatology, ranging from diagnosis, prognosis and therapeutic development to the mechanistic understanding of rheumatic diseases. This overview highlights key technological innovations and discusses the major impact that these developments are having on research and clinical practice. PMID:26439404

  17. Scapholunate advanced collapse.

    Science.gov (United States)

    Pomeranz, Stephen J; Salazar, Peter

    2015-01-01

    This case study reviews the pathophysiology of scapholunate advanced collapse (SLAC), which is the most common etiology of degenerative arthritis in the wrist. The scapholunate ligament serves a critical role in stability of the carpus. Disruption of the scapholunate ligament, its sequela, and the magnetic resonance imaging evaluation are discussed, with review of the defining features of this disease and its progression.

  18. Advances in Helium Cryogenics

    Science.gov (United States)

    Sciver, S. W. Van

    This review provides a survey of major advances that have occurred in recent years in the area of helium cryogenics. Helium-temperature cryogenics is the enabling technology for a substantial and growing number of low-temperature systems from superconducting magnets to space-based experimental facilities. In recent years there have been many advances in the technology of low-temperature helium, driven mostly by new applications. However, to keep the review from being too broad, this presentation focuses mainly on three of the most significant advances. These are: (1) the development of large-scale recuperative refrigeration systems mainly for superconducting magnet applications in accelerators and other research facilities; (2) the use of stored superfluid helium (He II) as a coolant for spacebased astrophysics experiments; and (3) the application of regenerative cryocoolers operating at liquid helium temperatures primarily for cooling superconducting devices. In each case, the reader should observe that critical technologies were developed to facilitate these applications. In addition to these three primary advances, other significant helium cryogenic technologies are briefly reviewed at the end of this chapter, along with some vision for future developments in these areas.

  19. Advanced geometries and regimes

    Energy Technology Data Exchange (ETDEWEB)

    Bulanov, S. S. [Univeristy of California, Berkeley, CA, 94720 (United States); Bulanov, S. V. [Kansai Photon Science Institute, JAEA, Kizugawa, Kyoto 619-0215 (Japan); Turchetti, G. [Dipartimento di Fisica, Università di Bologna and INFN Sezione di Bologna, Via Irnerio, 46-I-40126 Bologna (Italy); Limpouch, J.; Klimo, O.; Psikal, J. [Institute of Physics of the ASCR, ELI-Beamlines/HiLASE project, Na Slovance 2, 18221 Prague, Czech Republic and Czech Technical University in Prague, FNSPE, Brehova 7, 115 19 Prague (Czech Republic); Antici, P. [Dipartimento di Energetica ed INFM, Università di Roma, La Sapienza, 00165 Roma (Italy); Margarone, D.; Korn, G. [Institute of Physics of the ASCR, ELI-Beamlines/HiLASE project, Na Slovance 2, 18221 Prague (Czech Republic)

    2013-07-26

    We review and discuss different schemes of laser ion acceleration as well as advanced target geometries in connection with the development of the laser-driven proton source for hadron therapy of oncological diseases, which is a part of the ELIMED project.

  20. Advanced Distribution Management System

    Science.gov (United States)

    Avazov, Artur R.; Sobinova, Liubov A.

    2016-02-01

    This article describes the advisability of using advanced distribution management systems in the electricity distribution networks area and considers premises of implementing ADMS within the Smart Grid era. Also, it gives the big picture of ADMS and discusses the ADMS advantages and functionalities.