WorldWideScience

Sample records for unit dry weight

  1. Shoot and root dry weight in drought exposed tomato populations

    Directory of Open Access Journals (Sweden)

    Brdar-Jokanović Milka

    2014-01-01

    Full Text Available This research was conducted with the aim to among forty-one tested tomato (Lycopersicon esculentum Mill populations distinguish those tolerant to limited water supply. Tolerance assessments were performed by using sixteen drought stress selection indices calculated on the basis of tomato shoot and root dry weight yields determined at water stress and non-stress conditions. Populations were differentiated in groups using the method of cluster analysis. The pot experiment was set in controlled greenhouse conditions and comprised optimally irrigated control and drought treatment (35.0 and 20.9% volumetric soil water content, respectively, imposed at the phase of intensive vegetative growth. The experiment was conducted at the Institute for Vegetable Crops in Smederevska Palanka, Serbia. The analyzed tomatoes exhibited significant differences in terms of response to limited irrigation, which had more pronounced effect on shoot dry weight than on the roots (average decrease of 64.4 and 35.7%, respectively. Consequently, root fraction in the total dry weight increased at drought for 68.2% on average. Shoot and root dry weights were positively correlated at optimal irrigation but not in drought, implying genotypic differences in terms of root adjustments to stress conditions. As for the calculated selection indices, substantial variation was found among the populations enabling their ranking in terms of drought tolerance. Since ranking was not the same in all cases, clustering the populations was performed taking into account all sixteen selection indices. The results of this analysis indicate that populations designated with numbers 126, 124, 131, 125, 128, 105, 101, 138, 110, 132 and 109 in Institute for Vegetable Crops germplasm collection exhibit satisfactory level of drought tolerance at vegetative phase and therefore may be used as parents in breeding programs. [Projekat Ministarstva nauke Republike Srbije, br. TR 31005 i br. TR 31059

  2. Effect of Initial Unit Weight and Type of Soil on Water and Nitrate Movement through Saturated- Unsaturated Soils

    Directory of Open Access Journals (Sweden)

    Suhael Khatab

    2013-04-01

    Full Text Available The effect of initial dry unit weight and type of soil on water and nitrate migration through saturated-unsaturated soil is experimentally investigated using laboratory one-dimensional model (40 mm diameter, 100 mm height under various head boundary. The results were compared with the numerical results by using packages of finite element name SEEPW and CTRAN of GEOSLOPE software.          The results show that the initial dry unit weight has a significant effect on the transport process of water and contaminant through saturated-unsaturated soils, Nitrate concentration more sensitive than water flow to change in initial dry unit weight due to variation in  mechanical dispersion that affected by porosity and void ratio which depended on dry unit weight of soil. Water content and nitrate concentration was highly affected by soil type and water application boundary conditions. 

  3. Water stress and crop load effects on fruit fresh and dry weights in peach (Prunus persica).

    Science.gov (United States)

    Berman, M E; DeJong, T M

    1996-10-01

    Effects of water stress on fruit fresh and dry weights were investigated in peach trees, Prunus persica (L.) Batsch., with varying crop loads: light, moderate and heavy. In well-watered controls, tree water status was independent of crop load. In trees receiving reduced irrigation, the degree of water stress increased with increasing crop load. Water stress induced fruit fresh weight reductions at all crop loads. Fruit dry weight was not reduced by water stress in trees having light to moderate crop loads, indicating that the degree of water stress imposed did not affect the dry weight sink strength of fruit. Water-stressed trees with heavy crop loads had significantly reduced fruit dry weights, which were likely due to carbohydrate source limitations resulting from large crop carbon demands and water stress limitations on photosynthesis.

  4. Dry coolers and air-condensing units (Review)

    Science.gov (United States)

    Milman, O. O.; Anan'ev, P. A.

    2016-03-01

    The analysis of factors affecting the growth of shortage of freshwater is performed. The state and dynamics of the global market of dry coolers used at electric power plants are investigated. Substantial increase in number and maximum capacity of air-cooled condensers, which have been put into operation in the world in recent years, are noted. The key reasons facilitating the choice of developers of the dry coolers, in particular the independence of the location of thermal power plant from water sources, are enumerated. The main steam turbine heat removal schemes using air cooling are considered, their comparison of thermal efficiency is assessed, and the change of three important parameters, such as surface area of heat transfer, condensate pump flow, and pressure losses in the steam exhaust system, are estimated. It is shown that the most effective is the scheme of direct steam condensation in the heat-exchange tubes, but other schemes also have certain advantages. The air-cooling efficiency may be enhanced much more by using an air-cooling hybrid system: a combination of dry and wet cooling. The basic applied constructive solutions are shown: the arrangement of heat-exchange modules and the types of fans. The optimal mounting design of a fully shopassembled cooling system for heat-exchange modules is represented. Different types of heat-exchange tubes ribbing that take into account the operational features of cooling systems are shown. Heat transfer coefficients of the plants from different manufacturers are compared, and the main reasons for its decline are named. When using evaporative air cooling, it is possible to improve the efficiency of air-cooling units. The factors affecting the faultless performance of dry coolers (DC) and air-condensing units (ACU) and the ways of their elimination are described. A high velocity wind forcing reduces the efficiency of cooling systems and creates preconditions for the development of wind-driven devices. It is noted that

  5. Clinical praxis for assessment of dry weight in Sweden and Denmark: A mixed-methods study.

    Science.gov (United States)

    Stenberg, Jenny; Lindberg, Magnus; Furuland, Hans

    2016-01-01

    Overhydration is an independent predictor of mortality in hemodialysis (HD) patients. More than 30% of HD patients are overhydrated, motivating the development of new methods for assessing hydration status. This study surveyed clinical praxis and local guidelines for dry weight (DW) assessment in Swedish and Danish HD units, and examined if differences in routines and utilization of bioimpedance spectroscopy (BIS) and other assistive technology affected frequency of DW adjustments and blood pressure (BP) levels. Cross-sectional information on praxis, guidelines and routines, plus treatment-related data from 99 stratified patients were collected. Qualitative data were analyzed with content analysis and interpreted in convergence with statistical analysis of quantitative data in a mixed-methods design. Local guidelines concerning DW existed in 54% of the units. A BIS device was present in 52%, but only half of those units used it regularly, and no correlations to frequency of DW adjustments or BP were found. HD nurses were authorized to adjust DW in 60% of the units; in these units, the frequency of DW adjustments was 1.6 times higher and systolic BP pre-HD 8 mmHg lower. There is a wide variation in routines for DW determination, and there are indications that authorization of HD nurses to adjust DW may improve DW assessment. BIS is sparsely used; its implementation may have been delayed by uncertainty over how to manage the device and interpret measurements. Hence, better methods and guidelines for assessing DW and using BIS need to be developed. © 2015 The Authors. Hemodialysis International published by Wiley Periodicals, Inc. on behalf of International Society for Hemodialysis.

  6. Dry period heat stress relief effects on prepartum progesterone, calf birth weight, and milk production.

    Science.gov (United States)

    Wolfenson, D; Flamenbaum, I; Berman, A

    1988-03-01

    Effects of cooling high producing dairy cows during the dry period were examined in 84 pluriparous Israeli-Holstein cows. Cooling was by a combination of wetting and forced ventilation from 0600 to 1800 h until parturition and common management afterwards for both groups. Cooling maintained diurnal increase in rectal temperature within .2 degrees C as compared with .5 degrees C in control cows in warmer months, Mean rectal temperatures at 1400 h in control cows were moderate, within 39.2 degrees C. Cooling did not affect prepartum or postpartum body condition score or mean blood progesterone during the dry period. Results suggested a possible increase in blood progesterone in later pregnancy by cooling during hot weather. Cooling increased mean 150-d milk production by 3.6 kg/d (3.1 kg FCM/d). Prepartum cooling negatively affected first lactation month yield in cows calving in early summer. Prepartum cooling might prevent adaptation to heat and impair subsequent postpartum performance. Prepartum progesterone was not related to milk yield. Calves' birth weight increased by cooling, but the effect was mostly in older cows. Birth weight was related to milk yield, independently of cooling effect, mostly in older cows. Cooling during the dry period might increase milk yield as it does during lactation. Results indicate possible benefit of cooling dry cows even under mild heat stress.

  7. The Effect of Body Weight on Heat Strain Indices in Hot and Dry Climatic Conditions

    Directory of Open Access Journals (Sweden)

    Habibi

    2016-03-01

    Full Text Available Background Being overweight is a characteristic that may influence a person’s heat exchange. Objectives The purpose of this study was to assess the effect of body weight on heat strain indices in hot and dry climatic conditions. Materials and Methods This study was completed with a sample of 30 participants with normal weights, as well as 25 participants who were overweight. The participants were physically inactive for a period of 120 minutes in a climatic chamber with hot and dry conditions (22 - 32°C and with 40% relative humidity (RH.The physiological strain index (PSI and heat strain score index (HSSI questionnaires were used. Simultaneous measurements were completed during heat exposure for periods of five minutes. The resting periods acted as the initial measurements for 15 minutes. Results In both groups, oral temperature, heart rate, and thermal perceptual responses increased during heat exposure. The means and standard deviations of heart rate and oral temperature were gathered when participants were in hot and dry climatic conditions and were not physically active. The heart rates and oral temperatures were 79.21 ± 5.93 bpm and 36.70 ± 0.45°C, respectively, for those with normal weights. For overweight individuals, the measurements for heart rate and oral temperature reached 82.21 ± 8.9 bpm and 37.84 ± 0.37°C, respectively. Conclusions The results showed that, compared to participants with normal weights, physiological and thermal perceptual responses were higher in overweight participants. Therefore, overweight individuals should avoid hot/dry weather conditions to decrease the amount of heat strain.

  8. Effect of bionic coupling units' forms on wear resistance of gray cast iron under dry linear reciprocating sliding condition

    Science.gov (United States)

    Pang, Zuobo; Zhou, Hong; Xie, Guofeng; Cong, Dalong; Meng, Chao; Ren, Luquan

    2015-07-01

    In order to get close to the wear form of guide rails, the homemade linear reciprocating wear testing machine was used for the wear test. In order to improve the wear-resistance of gray cast iron guide rail, bionic coupling units of different forms were manufactured by a laser. Wear behavior of gray-cast-iron with bionic-coupling units has been studied under dry sliding condition at room temperature using the wear testing machine. The wear resistance was evaluated by means of weight loss measurement and wear morphology. The results indicated that bionic coupling unit could improve the wear resistance of gray cast iron. The wear resistance of gray cast iron with reticulation bionic coupling unit is the best. When the load and speed changed, reticulation bionic coupling unit still has excellent performance in improving the wear resistance of gray cast iron.

  9. 78 FR 68410 - United States Standards for Whole Dry Peas

    Science.gov (United States)

    2013-11-14

    ... widely in private contracts, government procurement and marketing communication. Standards developed... facilitate the marketing of the class, Smooth Yellow Dry Peas and help ensure the purity of classes for Whole... Section 203(c) of the Agricultural Marketing Act of 1946, as amended (AMA) (7 U.S.C. 1622(c)), directs and...

  10. EFFECT OF ARSENIC ON DRY WEIGHT AND RELATIVE CHLOROPHYLL CONTENT IN GREENINGMAIZE AND SUNFLOWER TISSUES

    Directory of Open Access Journals (Sweden)

    Szilvia Várallyay

    2015-02-01

    Full Text Available Arsenic is one of the most toxic elements that can be found in the environment. Excessive uptake of arsenic may cause physiological changes in plants. The aim of the study was to investigate the effect of different arsenic treatments on relative chlorophyll content and dry weight of shoot and root of maize and sunflower in the early phases of plant development. Seedlings were grown in climatic room in nutrient solution under strictly regulated environmental conditions. The plants were exposed to 3, 10 and 30 mg kg-1arsenic, whereas there was no arsenic treatment on the control plants. We applied arsenic in the form of arsenite (NaAsO2 and arsenate (KH2AsO4, respectively. After 14 days of arsenic treatments, changes in relative chlorophyll content and dry weight of maize shoots and roots were recorded. In the case of sunflower these physiological parameters were measured after 21 day. The applied arsenic decreased the relative chlorophyll content of maize and sunflower leaves, especially at concentration of30 mg kg-1. The increasing amount of As treatment were resulted the lower weight of the experimental plants, which was more considerable in the case of the roots. The results indicate that the sunflower plants is more sensitive to arsenic toxicity than maize plants and all data demonstrate that the As(III is more toxic to these crop plants than the As(V.

  11. Specific leaf mass, fresh: dry weight ratio, sugar and protein contents in species of Lamiaceae from different light environments.

    Science.gov (United States)

    Castrillo, M; Vizcaino, D; Moreno, E; Latorraca, Z

    2005-01-01

    Samples from eleven species of Lamiaceae were collected from different light environments in Venezuela for laboratory analysis. The studied species were: Plectranthus scutellarioides (Ps), Scutellaria purpurascens (Sp), Hyptis pectinata (Hp)), H. sinuata (Hs). Leonorus japonicus (Lj), Plecthranthus amboinicus (Pa) Ocimum hasilicum (Ocb), O. campechianum (Occ) Origanum majorana (Orm), Rosmarinus officinali, (Ro) and Salvia officinalis (So). Protein and soluble sugar contents per unit of area were measured, Specific Leaf Mass (SLM) and fresh:dry weight (FW/DW) ratios were calculated. The higher values for soluble sugars contents were present in sun species: Lj, Pa, Ocb, Occ, Orm, Ro and So; the lower values were obtained in low light species: Ps, Sp, Hp, Hs. The values of protein content do not show any clear trend or difference between sun and shade environments. The lowest values for the fresh weight: dry weight ratio are observed in sun species with the exception of Lj and Pa, while the highest value is observed in Pa, a succulent plant. The higher values of specific leaf mass (SLM) (Kg DMm(-2)) are observed in sun plants. The two way ANOVA revealed that there were significant differences among species and between sun and low light environments for sugar content and FW:DW ratio. while SLM was significant for environments but no significant for species, and not significant for protein for both species and environments. The soluble sugar content, FW:DW ratio and SLM values obtained in this work, show a clear separation between sun and shade plants. The sugar content and FW:DW ratio are distinctive within the species, and the light environment affected sugar content. FW:DW ratio and SLM. These species may he shade-tolerant and able to survive in sunny environments. Perhaps these species originated in shaded environments and have been adapting to sunny habitats.

  12. Fabrication of light weight radioisotope heater unit hardware components

    Science.gov (United States)

    McNeil, Dennis C.

    1996-03-01

    The Light Weight Radioisotope Heater Unit (LWRHU) is planned to be used on the National Aeronautics and Space Administration (NASA) Cassini Mission, to provide localized thermal energy as strategic locations on the spacecraft. These one watt heater units will support the operation of many on-board instruments that require a specific temperature range to function properly. The system incorporates a fuel pellet encapsulated in a vented metallic clad fabricated from platinum-30% rhodium (Pt-30%Rh) tubing, sheet and foil materials. To complete the package, the clad assemblies are placed inside a combination of graphite components. This report describes the techniques employed by Mound related to the fabrication and sub assembly processes of the LWRHU clad hardware components. Included are details concerning configuration control systems, material procurement and certification, hardware fabrication specifics, and special processes that are utilized.

  13. Body weight perception among adolescents in Dubai, United Arab Emirates.

    Science.gov (United States)

    Musaiger, A O; bin Zaal, A A; D'Souza, R

    2012-01-01

    This study investigated the body image perceptions among adolescents in Dubai, United Arab Emirates (UAE). A cross-sectional survey was conducted amongst 661 adolescents (324 males; 337 females) aged 12-17 years selected from government schools using a multistage stratified random sampling technique. A pretested validated questionnaire was employed to determine the perception of adolescents toward their weight status. A nine figure silhouette illustration was used to measure perceptions of their ideal body image and how it compares with their current body weight. The results revealed that overweight (18.5%) and obesity (27.2%) were higher among males than in females (13.1% and 20.5% respectively). A high proportion of overweight males and females considered themselves as average (45.0% and 52.3%, respectively). Similarly, 56.9% of obese male and 46.4% of females considered themselves as average weight. Of non-overweight/obese males and females, 27.6% and 39.3% respectively, were pressured by parents to gain weight (p > 0.000). In general overweight and obese adolescents were more likely to face pressure from their parents and teased by friends than non-overweight/obese adolescents. Compared to their current body image, overweight and obese adolescents chose a significantly lighter figure as their ideal (p < 0.000). It is suggested that the current health education curriculum should include information related to healthy body weight and appropriate diet and lifestyle so as to minimize risk of developing distorted body image concerns in adolescence and beyond.

  14. Evaluation of heat stress in dry cleaner units:A case study in Qom, Iran

    Directory of Open Access Journals (Sweden)

    Javad Malakouti

    2016-04-01

    Full Text Available Background & Aims of the Study: Nowadays, heat stress is one of the most harmful physical agents in workplaces. According to the consequences of heat stress and have no information about it in Qom dry cleaner units, Iran, this study have been designed to evaluate the heat stress among workers of dry cleaner units in Qom province of Iran, in Jul-Aug 2011. Materials & Methods: This cross-sectional study was conducted in 113 units of active dry cleaner units. WBGT (Wet Bulb Globe Temperature index was selected for heat stress evaluation. In order to measure the requisite parameters, WBGT meter made of Casella Company had been used according to ISO 7243. Data had been analyzed according to Occupational Exposure Limits (OELs with SPSS V.16, using analysis of variance, independent T and LSD tests. Results: The average of WBGT index in Qom dry cleaner units of Iran were 28.98±1.64 °C. The average of WBGT index in 66.4% of units was up to 28°C. The average of relative humidity was 42.86%, the average of wet bulb temperature and globe temperature were 25.56°C and 36.72°C, respectively. The findings showed a significant correlation between the average of WBGT index and the standard recommendation level (p<0.0001. In dry cleaner units with less than 10 m2 area, heat stress was higher than other units  significantly (p<0.05. Conclusions: Heat stress in many dry cleaner units in Qom, Iran, was more than recommended OELs. Because of wet bulb and globe temperature in units were high value, the most important measures to heat controls, are technical engineering controls such as  radiation shield, insulation on boilers and modify the cooling systems.

  15. Pharmacokinetic Comparison of a Unit Dose Dry Powder Inhaler with a Multidose Dry Powder Inhaler for Delivery of Fluticasone Furoate.

    Science.gov (United States)

    Mehta, Rashmi; Moore, Alison; Riddell, Kylie; Joshi, Shashidhar; Chan, Robert

    2017-05-02

    The unit dose dry powder inhaler (UD-DPI) is being considered as an alternative inhaler platform that, if developed, has the potential to improve access to inhaled respiratory medicines in developing countries. This study compared the systemic exposure of fluticasone furoate after delivery from the UD-DPI with that from the ELLIPTA(®) inhaler. This open-label, five-way cross-over, randomized, single-dose study in healthy subjects evaluated fluticasone furoate systemic exposure of three dose strengths (using four inhalations), 4 × 80 μg [320 μg], 4 × 100 μg [400 μg], and 4 × 140 μg [560 μg]), and two percentages of drug in lactose blends (0.6% and 0.8% by weight) after delivery from the UD-DPI compared with systemic exposures from the ELLIPTA inhaler (4 × 100 μg [400 μg] dose, 0.8% lactose blend). The primary treatment comparisons were area under the concentration-time curve from time 0 to 6 hours [AUC0-6] and maximum plasma concentration [Cmax]. After single-dose administration of fluticasone furoate, systemic exposure was lower from all UD-DPI formulations versus the ELLIPTA inhaler in terms of both AUC0-6 [AUC0-6 geometric least squares mean (GLM) ratios confidence interval (90% CI) for: UD-DPI (400 μg 0.8% blend)/ELLIPTA: 0.61 (0.55-0.67) and Cmax GLM (90% CI) for: UD-DPI (400 μg 0.8% blend)/ELLIPTA: 0.56 (0.49-0.64)]. Systemic exposures were ∼10% lower for fluticasone furoate UD-DPI for the 0.8% blend versus the 0.6% blend [GLM ratio (90% CI); 0.90 (0.81-1.00) for AUC0-6 and 0.89 (0.77-1.01) for Cmax], and increasing doses of fluticasone furoate from the UD-DPI showed systemic exposures that were approximately dose proportional. All treatments were well tolerated. Fluticasone furoate systemic exposure was lower from the UD-DPI than from the ELLIPTA inhaler, but the UD-DPI formulations did demonstrate detectable systemic levels and approximate dose proportionality. Together with the good tolerability shown

  16. Light-weight radioisotope heater unit (LWRHU) impact tests

    Science.gov (United States)

    Reimus, M. A. H.; Rinehart, G. H.; Herrera, A.; Lopez, B.; Lynch, C.; Moniz, P.

    1998-01-01

    The light-weight radioisotope heater unit (LWRHU) is a 238PuO2-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed 238PuO2 fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. To compare the performance of the LWRHUs fabricated for the Cassini mission with the performance of those fabricated for the Galileo mission, and to determine a failure threshold, two types of impact tests were conducted. A post-reentry impact test was performed on one of 180 flight-quality units produced for the Cassini mission and a series of sequential impact tests using simulant-fueled LWRHU capsules were conducted respectively. The results showed that deformation and fuel containment of the impacted Cassini LWRHU was similar to that of a previously tested Galileo LWRHU. Both units sustained minimal deformation of the aeroshell and fueled capsule; the fuel was entirely contained by the platinum capsule. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s.

  17. Effect of mungbean (Vigna radiate) living mulch on density and dry weight of weeds in corn (Zea mays) field.

    Science.gov (United States)

    Moghadam, M Bakhtiari; Vazan, S; Darvishi, B; Golzardi, F; Farahani, M Esfini

    2011-01-01

    Living mulch is a suitable solution for weeds ecological management and is considered as an effective method in decreasing of weeds density and dry weight. In order to evaluate of mungbean living mulch effect on density and dry weight of weeds in corn field, an experiment was conducted as a split plot based on randomized complete block design with four blocks in Research Field of Department of Agronomy, Karaj Branch, Islamic Azad University in 2010. Main plots were time of mungbean suppression with 2,4-D herbicide in four levels (4, 6, 8 and 10 leaves stages of corn) and control without weeding and sub plots were densities of mungbean in three levels (50%, 100% and 150% more than optimum density). Density and dry weight of the weeds were measured in all plots with a quadrate (60 x 100 cm) in 10 days after tasseling. Totally, 9 species of weeds were identified in the field, which included 4 broad leave species that were existed in all plots. The results showed that the best time for suppression of mungbean is the 8 leaves stage of corn, which decreased density and dry weight of weeds, 53% and 51% in comparison with control, respectively. Increase of density of mungbean from 50% into 150% more than optimum density, decrease the density and dry weight of weeds, 27.5% and 22%, respectively. It is concluded that the best time and density for suppression mungbean was 8 leaves stage of corn, and 150% more than optimum density, which decreased density and dry weight of the weeds 69% and 63.5% in comparison with control, respectively.

  18. Noncontact Infrared-Mediated Heat Transfer During Continuous Freeze-Drying of Unit Doses.

    Science.gov (United States)

    Van Bockstal, Pieter-Jan; De Meyer, Laurens; Corver, Jos; Vervaet, Chris; De Beer, Thomas

    2017-01-01

    Recently, an innovative continuous freeze-drying concept for unit doses was proposed, based on spinning the vials during freezing. An efficient heat transfer during drying is essential to continuously process these spin frozen vials. Therefore, the applicability of noncontact infrared (IR) radiation was examined. The impact of several process and formulation variables on the mass of sublimed ice after 15 min of primary drying (i.e., sublimation rate) and the total drying time was examined. Two experimental designs were performed in which electrical power to the IR heaters, distance between the IR heaters and the spin frozen vial, chamber pressure, product layer thickness, and 5 model formulations were included as factors. A near-infrared spectroscopy method was developed to determine the end point of primary and secondary drying. The sublimation rate was mainly influenced by the electrical power to the IR heaters and the distance between the IR heaters and the vial. The layer thickness had the largest effect on total drying time. The chamber pressure and the 5 model formulations had no significant impact on sublimation rate and total drying time, respectively. This study shows that IR radiation is suitable to provide the energy during the continuous processing of spin frozen vials.

  19. The Inferior Vena Cava Diameter as a Marker of Dry Weight in Chronic Hemodialyzed Patients

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    We have previously reported that the diameter of the inferior vena cava(IVC) reflects the amount of body fluid in hemodialyzed (HD) patients. The present study was undertaken to depict the criteria of IVC diameters for determining dry weight (DW) in anuric HD patients. In healthy subjects, the maximal diameters during quiet expiration (IVCe) and the minimal diameters during quiet inspiration (IVCi) were (16.7±3.2) and (5.7±5.4)mm,respectively (mean±SD).The collapsibility index (CI,1-IVCi/IVCe), which inversely correlates with the central venous pressure,was 0.68±0.29. In anuric HD patients,the IVCe/CI values before and after HD were 14.9±3.2/0.68±0.24 and 8.2±2.3/0.94±0.09, respectively. IVCe decreased proportionally to the amount of ultrafiltration. In HD patients with hypervolemic pulmonary edema, the IVCe and CI values were 22.4±2.9 and 0.22±0.11, respectively. We proposed that IVCe/CI after HD is (8±3)mm/0.9 ± 0.1 as the markers of DW in anuric HD patients and that an IVCe value≥22mm together with a CI≤0.22 implies the warning level of body fluid retention.

  20. Dry-Weight: A Concept Revisited in an Effort to Avoid Medication-Directed Approaches for Blood Pressure Control in Hemodialysis Patients

    Science.gov (United States)

    Weir, Matthew R.

    2010-01-01

    Background and objectives: Achieving and maintaining dry-weight appears to be an effective but forgotten strategy in controlling and maintaining normotension among hypertensive patients on hemodialysis. Methods: Qualitative review of literature to define dry-weight and its utility in achieving blood pressure control. Results: The concept of dry-weight has evolved over time and its definition has changed. One such definition defines dry-weight as the lowest tolerated postdialysis weight achieved via gradual change in postdialysis weight at which there are minimal signs or symptoms of hypovolemia or hypervolemia. Although clinical examination does not perform well in detecting latent increase in dry-weight, several technologies such as relative plasma volume monitoring and body impedance analysis are emerging that may help in assessing dry-weight in the future. Sodium restriction is a modifiable risk factor that can lead to better blood pressure (BP) control. However, dietary sodium restriction requires lifestyle modifications that are difficult to implement and even harder to sustain over the long term. Restricting dialysate sodium is a simpler but underexplored strategy that can reduce thirst, limit interdialytic weight gain, and assist the achievement of dry-weight. Achievement of dry-weight can improve interdialytic BP, reduce pulse pressure, and limit hospitalizations. Conclusions: Avoiding medication-directed control of BP may enhance the opportunity to probe dry-weight, facilitate removal of volume, and limit the risk for pressure-volume overload, which may be a significant concern leading to myocardial remodeling in the hemodialysis patient. Probing dry-weight among patients with ESRD has the potential to improve dismal cardiovascular outcomes. PMID:20507951

  1. Plant growth with new fluorescent lamps : I. Fresh and dry weight yields of tomato seedlings.

    Science.gov (United States)

    Thomas, A S; Dunn, S

    1966-06-01

    Tomato seedlings were grown under seven kinds of fluorescent lamps, including two that are commercially available, and five experimental lamps. Detailed descriptions and spectral emission curves for these lamps are presented.The 78/22 lamp, which emitted most of its energy above 500 mμ, more than ten percent above 700 mμ, and had a sharp peak output at 660 mμ, generally produced superior fresh and dry weight yields. This effect may be due primarily to the high peak of energy emitted at approximately 660 mμ, combined with a considerable emission in the far-red, which in turn may be related to the red ↔ far-red reversibility phenomeon.The Com I lamp, which lacked the sharp peak output at 660 mμ and emitted more energy in the blue than the 78/22 lamp, was generally second only to the latter in promoting plant growth. A high moisture content was found in plants under this lamp in some experiments.The IRIII lamp had the sharp peak output at 660 mμ but greater output in the blue than the 78/22 lamp. The 282 lamp output was similar to the 78/22 but lacked the high peak. Both of these lamps generally gave improved results over those produced by commercial Gro-Lux, Warm-white, and FLAT lamps. This was attributed to the greater percentage of red and far-red energy emission by the former two lamps. The yields with the FLAT lamp were consistently lowest of all. This has been attributed to the high percentage of emitted energy in the blue and green portions of the spectrum.Both length of the test period (13 days versus 26 days) and light intensity (550 μw/cm(2) versus 1100 μw/cm(2)) may be important factors in determining which composition of spectral energy emission produces the greatest yields. Under low intensity and short test period the Com I light produced highest fresh- and dry-weight yields, but under high intensity and longer growth period the 78/22 lamp gave greatest yields. This effect may be due to inhibition of leaf expansion by red light in the early

  2. Leaf area development, dry weight accumulation and solar energy conversion efficiencies of Phaseolus vulgaris L. under different soil moisture levels near Nairobi, Kenya

    NARCIS (Netherlands)

    Muniafu, M.M.; Macharia, J.N.M.; Stigter, C.J.; Coulson, G.L.

    1999-01-01

    Leaf area development, dry weight accumulation and solar energy conversion efficiencies of Phaseolus vulgaris L. cv GLP-2 under two soil moisture levels in two contrasting seasons near Nairobi, Kenya were investigated. The experiment confirms that dry weights and yields of Phaseolus vulgaris are lim

  3. Full-scale demonstration of dry-sodium injection at R. D. Nixon Unit 1

    Energy Technology Data Exchange (ETDEWEB)

    Hooper, R.

    The report describes both bench- and pilot-scale tests done by the Colorado Springs Department of Utilities (CSDU) at R.D. Nixon Unit 2 to demonstrate a dry-sodium injection technique for flue gas desulfurization (FGD). The purpose of this demonstration was to verify that the process can meet U.S. Environmental Protection Agency 'best available control technology' (BACT) criteria of 70% SO/sub 2/ removal on a 30-day rolling-average basis.

  4. QTL-seq for rapid identification of candidate genes for 100-seed weight and root/total plant dry weight ratio under rainfed conditions in chickpea.

    Science.gov (United States)

    Singh, Vikas K; Khan, Aamir W; Jaganathan, Deepa; Thudi, Mahendar; Roorkiwal, Manish; Takagi, Hiroki; Garg, Vanika; Kumar, Vinay; Chitikineni, Annapurna; Gaur, Pooran M; Sutton, Tim; Terauchi, Ryohei; Varshney, Rajeev K

    2016-11-01

    Terminal drought is a major constraint to chickpea productivity. Two component traits responsible for reduction in yield under drought stress include reduction in seeds size and root length/root density. QTL-seq approach, therefore, was used to identify candidate genomic regions for 100-seed weight (100SDW) and total dry root weight to total plant dry weight ratio (RTR) under rainfed conditions. Genomewide SNP profiling of extreme phenotypic bulks from the ICC 4958 × ICC 1882 population identified two significant genomic regions, one on CaLG01 (1.08 Mb) and another on CaLG04 (2.7 Mb) linkage groups for 100SDW. Similarly, one significant genomic region on CaLG04 (1.10 Mb) was identified for RTR. Comprehensive analysis revealed four and five putative candidate genes associated with 100SDW and RTR, respectively. Subsequently, two genes (Ca_04364 and Ca_04607) for 100SDW and one gene (Ca_04586) for RTR were validated using CAPS/dCAPS markers. Identified candidate genomic regions and genes may be useful for molecular breeding for chickpea improvement. © 2016 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

  5. Dry weight management for patients with hemodialysis%血液透析患者的干体重管理

    Institute of Scientific and Technical Information of China (English)

    吴广礼; 陈云爽

    2015-01-01

    干体重是评价血液透析充分性的重要指标,对于提高血液透析患者的生存率和生活质量至关重要。随着医学实践的进步,干体重的定义不断发展,概念逐步演变。干体重设定过高可影响血压、心血管系统稳定性和炎症因子,但干体重设定过低可增加血管通路阻塞的风险,造成残余肾功能丧失的风险增加以及增加血液透析间期低血压相关的并发症。目前临床上干体重评估方法有临床评估法、下腔静脉直径测定法、同位素测定法、血浆标志物测定法、无创血容量监测及生物电阻抗频谱分析法等,每种方法均存在其局限性。干体重不达标主要是因为患者不遵从医嘱、血液透析时间短、钠摄入过多等。临床上应分析患者具体情况采取针对性措施以达到目标干体重。%Dry-weight is an important assessment index for adequacy of hemodialysis,and is vital for improving the survival rate as well as quality of life of patients.With the advances in medical practice, the dry weight definition has developed gradually and the concept evolved.Too high dry weight can affect blood pressure,cardiovascular system stability,and inflammatory factors,while too low dry weight may increase the risk of vascular access obstruction and loss of residual renal function,and increase hypotension-related complications during hemodialysis.Currently clinical methods for evaluation on dry weight includes clinical evaluation,determination for diameter of the inferior vena cava,isotope determination,determination of plasma markers,non-invasive blood volume monitor,and bio-electrical impedance spectra analysis,and so on,but each method has its limitations.Clinically dry weight dissatisfaction is mainly because of patients′failing to follow the doctor′s advice,short time of hemodialysis,and excess sodium intake,etc.Clinical analysis of patients′specific conditions should be performed to take

  6. Weighted Plancherel formula on unit ball in R

    Institute of Scientific and Technical Information of China (English)

    刘建明; 郑维行

    1996-01-01

    Let / be a function on the unit ball of Rn. For , the action T of SO0 (1, n) on f isdefined by .The invariant Laplacian corresponding to T is calculated, and a family of its eigenfunctions is found out. Then the corresponding Fourier transform is defined and the inversion formula and Plancherel formula are obtained.

  7. Evaluation of spin freezing versus conventional freezing as part of a continuous pharmaceutical freeze-drying concept for unit doses.

    Science.gov (United States)

    De Meyer, L; Van Bockstal, P-J; Corver, J; Vervaet, C; Remon, J P; De Beer, T

    2015-12-30

    Spin-freezing as alternative freezing approach was evaluated as part of an innovative continuous pharmaceutical freeze-drying concept for unit doses. The aim of this paper was to compare the sublimation rate of spin-frozen vials versus traditionally frozen vials in a batch freeze-dryer, and its impact on total drying time. Five different formulations, each having a different dry cake resistance, were tested. After freezing, the traditionally frozen vials were placed on the shelves while the spin-frozen vials were placed in aluminum vial holders providing radial energy supply during drying. Different primary drying conditions and chamber pressures were evaluated. After 2h of primary drying, the amount of sublimed ice was determined in each vial. Each formulation was monitored in-line using NIR spectroscopy during drying to determine the sublimation endpoint and the influence of drying conditions upon total drying time. For all tested formulations and applied freeze-drying conditions, there was a significant higher sublimation rate in the spin-frozen vials. This can be explained by the larger product surface and the lower importance of product resistance because of the much thinner product layers in the spin frozen vials. The in-line NIR measurements allowed evaluating the influence of applied drying conditions on the drying trajectories.

  8. Electrical capacitance as a predictor of root dry weight in shrub willow (Salix; Salicaceae) parents and progeny1

    Science.gov (United States)

    Carlson, Craig H.; Smart, Lawrence B.

    2016-01-01

    Premise of the study: Root biomass is an important trait often disregarded in woody perennial selection due to the challenge and expense of accurately and efficiently measuring large populations. In this study, we aim to develop a simple method that can predict root dry weight within a diverse shrub willow (Salix) breeding population representing species hybrids and their parents using root electrical capacitance (REC). Methods: The REC method was tested on plants started from cuttings and grown in pots with potting mix in the greenhouse for 11 wk to assess the relationship of REC with 24 biomass traits and its usefulness in allometric models for root and stem dry biomass. Results: Strong linear and positive correlations were found between REC and root dry biomass (r = 0.88). The total proportion of variance of root and stem dry biomass explained by predictors in multiple regression was 85% and 69%, respectively. The relative importance of predictor variables in allometric models was dominated by the contribution of REC. Discussion: This work provides an efficient and nondestructive technique to indirectly quantify root biomass of genetically diverse shrub willow progeny, which has great promise for selection of genotypes with varying root biomass and for the accurate estimation of belowground carbon sequestration. PMID:27610275

  9. VOLUME ESTIMATION, DRY WEIGHT, OIL CONTENT AND QUANTITY OF FENCEPOSTS OF CANDEIA (Eremanthus erythropappus (DC MacLeish

    Directory of Open Access Journals (Sweden)

    José Roberto Soares Scolforo

    2004-06-01

    Full Text Available This research aimed at studying the behavior of volume, dry weight, oil content and fence post quantity per diametric class of candeia; to define its stack factor, with and without diametric class control; and to determine equations for estimating the main stem and branches volume, dry weight and oil content of the hole tree, trunk, branches and leaves and fencepost quantity. Data were obtained from a forest inventory carried out in a native candeia forest located in Aiuruoca county, Minas Gerais state - Brazil. Tree volume was calculated through the Huber formula and oil extraction methods employed were “the solvent method” and “vapor hauling method”. For estimation volume, dry weight, oil content and fencepost number the traditional double entry models were used. The oil weight in 1 cubic meter of wood of small dimensions, trees between 5 and 10cm, is around 6 kilos, while the oil content of the largest trees, between 40 and 45cm, is around 11 kilos. The same tendency is observed for the wood volume, without bark, and in the volume of piled up wood, although in these last situations the magnitude of quantities are different. The oil content of candeia trees present the following behavior: in the stem and branches up to 3cm of diameter with bark, it varies from 1,02% to 1,37%, respectively to plants with diameter between 5 and 10cm and between 40 and 45cm; in the branches with less than 3cm of diameter with bark, it varies from 0,33% to 0,65%,respectively, to plants between 5 and 10cm and between 40 and 45cm of diameter; in the leaves it varies from 0,28% to 0,77%, respectively, for plants between 5-10cm and between 40-45cm of diameter. The average stack factor is 1.9087 and diminishes as diameter classes increases. The best model for estimating oil content, dry weight, fence post quantity and volume is the logarithmic form of Schumacher-Hall model.

  10. Estimating and verifying soil unit weight determined on the basis of SCPTu tests

    Directory of Open Access Journals (Sweden)

    Bagińska Irena

    2016-09-01

    Full Text Available The unit weight, as a basic physical feature of soil, is an elementary quantity, and knowledge of this parameter is necessary in each geotechnical and geo-engineering task. Estimation of this quantity can be made with both laboratory and field techniques. The paper comprises a multi-scale evaluation of unit weight of cohesive soil, based on several measurements made in nearby locations using the SCPTu static probe. The procedures used were based on the two classifications and two solutions from literature. The results were referenced to the actual values of unit weight determined with a direct procedure from undisturbed samples. The resulting solutions were the basis for proposing a new formula to determine the soil unit weight from SCPTu measurements, as well as comparative analysis using exemplary values taken from the national Polish standard.

  11. 16 CFR 500.8 - Units of weight or mass and measure.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Units of weight or mass and measure. 500.8... SECTION 4 OF THE FAIR PACKAGING AND LABELING ACT § 500.8 Units of weight or mass and measure. (a... (15 oz)” or “Net Mass 680 g (11/2 lbs)” or “100 g e (3.5 oz).”) (b) Statements of fluid measure shall...

  12. $L^p$ Regularity of Some Weighted Bergman Projections on the Unit Disc

    CERN Document Server

    Zeytuncu, Yunus E

    2011-01-01

    We show that weighted Bergman projections, corresponding to weights of the form $M(z)(1-|z|^2)^{\\alpha}$ where $\\alpha>-1$ and $M(z)$ is a radially symmetric, strictly positive and at least $C^2$ function on the unit disc, are $L^p$ regular.

  13. A Weighted Estimate for the Square Function on the Unit Ball in $\\C^n$

    OpenAIRE

    PETERMICHL, stefanie; Wick, Brett D.

    2007-01-01

    We show that the Luzin area integral or the square function on the unit ball of ℂn, regarded as an operator in the weighted space L2(w) has a linear bound in terms of the invariant A2 characteristic of the weight. We show a dimension-free estimate for the “area-integral” associated with the weighted L2(w) norm of the square function. We prove the equivalence of the classical and the invariant A2 classes.

  14. Infiltration and Erosion in Soils Treated with Dry PAM of Two Molecular Weights and Phosphogypsum

    Science.gov (United States)

    Soil surface application of dissolved linear polyacrylamide (PAM) of high molecular weight (MW) can mitigate seal formation, runoff and erosion, especially when added with a source of electrolytes (e.g., gypsum). Practical difficulties associated with PAM solution application prohibited commercial u...

  15. Specific leaf mass, fresh: dry weight ratio, sugar and protein contents in species of Lamiaceae from different light environments

    Directory of Open Access Journals (Sweden)

    M Castrillo

    2005-06-01

    Full Text Available Samples from eleven species of Lamiaceae were collected from different light environments in Venezuela for laboratory analysis.The studied species were: Plectranthus scutellarioides (Ps, Scutellaria purpurascens (Sp, Hyptis pectinata (Hp, H. sinuata (Hs, Leonorus japonicus (Lj, Plecthranthus amboinicus (Pa Ocimum basilicum (Ocb, O.campechianum (Occ Origanum majorana (Orm, Rosmarinus officinali ,(Ro and Salvia officinalis (So. Protein and soluble sugar contents per unit of area were measured, Specific Leaf Mass (SLMand fresh: dry weight (FW/DW ratios were calculated. The higher values for soluble sugars contents were present in sun species: Lj, Pa, Ocb, Occ, Or. m, Ro and So; the lower values were obtained in low light species: Ps, Sp, Hp, Hs. The values of protein content do not show any clear trend or difference between sun and shade environments. The lowest values for the fresh weight: dry weight ratio are observed in sun species with the exception of Lj and Pa, while the highest value is observed in Pa, a succulent plant. The higher values of specific leaf mass (SLM(Kg DMm-2 are observed in sun plants. The two way ANOVA revealed that there were significant differences among species and between sun and low light environments for sugar content and FW: DW ratio, while SLM was significant for environments but no significant for species, and not significant for protein for both species and environments. The soluble sugar content, FW: DW ratio and SLM values obtained in this work, show a clear separation between sun and shade plants. The sugar content and FW:DW ratio are distinctive within the species,and the light environment affected sugar content, FW:DW ratio and SLM. These species may be shade-tolerant and able to survive in sunny environments. Perhaps these species originated in shaded environments and have been adapting to sunny habitats.Rev.Biol.Trop.53(1-2:23-28.Epub 2005 Jun 24En once especies de la familia Lamiaceae: Plecthranthus

  16. Performance of block lining in the zone of slanted ducts of a coke dry quenching unit

    Energy Technology Data Exchange (ETDEWEB)

    Frolova, L.S.; Drozd, V.I.; Zadorozhnaya, T.A.; Minasov, A.N.; Surenskii, O.N.; Ershov, N.A.; Ignashin, G.I.; Mishin, E.N. (UkrNIIO (USSR))

    1991-01-01

    Discusses service life and wear of concrete blocks used for construction of dry coke quenching chambers. Concrete blocks replaced conventional refractory bricks. A filler from calcinated bauxites and a high-alumina cement were used for concrete block production. The blocks were used for construction of the zones of slanted ducts. Concrete block properties are analyzed: dimensions, weight, ultimate compression strength, open porosity, apparent density, linear shrinkage at 1,400 C and holding for 5 hours, content of calcium, aluminium and iron oxides. Abrasive wear and spalling of the working surface of the slanted duct zone made of the concrete blocks was 1.5-2.0 lower than that of conventional refractory bricks in chambers with the same service life. Tests carried out 8 years long showed that the slanted duct zones made of concrete blocks were characterized by higher abrasion resistance and heat resistance, reduced number of joints and increased rigidity of the slanted duct structure. 4 refs.

  17. Olive paste oil content on a dry weight basis (OPDW): an indicator for optimal harvesting time in modern olive orchards

    Energy Technology Data Exchange (ETDEWEB)

    Zipori, I.; Bustan, A.; Kerem, Z.; Dag, A.

    2016-07-01

    In modern oil olive orchards, mechanical harvesting technologies have significantly accelerated harvesting outputs, thereby allowing for careful planning of harvest timing. While optimizing harvest time may have profound effects on oil yield and quality, the necessary tools to precisely determine the best date are rather scarce. For instance, the commonly used indicator, the fruit ripening index, does not necessarily correlate with oil accumulation. Oil content per fruit fresh weight is strongly affected by fruit water content, making the ripening index an unreliable indicator. However, oil in the paste, calculated on a dry weight basis (OPDW), provides a reliable indication of oil accumulation in the fruit. In most cultivars tested here, OPDW never exceeded ca. 0.5 g·g–1 dry weight, making this threshold the best indicator for the completion of oil accumulation and its consequent reduction in quality thereafter. The rates of OPDW and changes in quality parameters strongly depend on local conditions, such as climate, tree water status and fruit load. We therefore propose a fast and easy method to determine and monitor the OPDW in a given orchard. The proposed method is a useful tool for the determination of optimal harvest timing, particularly in large plots under intensive cultivation practices, with the aim of increasing orchard revenues. The results of this research can be directly applied in olive orchards, especially in large-scale operations. By following the proposed method, individual plots can be harvested according to sharp thresholds of oil accumulation status and pre-determined oil quality parameters, thus effectively exploiting the potentials of oil yield and quality. The method can become a powerful tool for scheduling the harvest throughout the season, and at the same time forecasting the flow of olives to the olive mill. (Author)

  18. Candidate sites for future hot-dry-rock development in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Goff, F.; Decker, E.R.

    1982-12-01

    Generalized geologic and other data are tabulated for 24 potential hot dry rock (HDR) sites in the contiguous United States. The data show that HDR resources occur in many geologic and tectonic settings. Potential reservoir rocks at each prospect are described and each system is cateogrized accoridng to inferred heat sources. The Fenton Hill area in New Mexico is discussed in detail because this region may be considered ideal for HDR development. Three other prospectively valuable localities are described: The Geysers-Clear lake region in California, the Roosevelt Hot Springs area in Utah, and the White Mountains region in New Hampshire. These areas are singled out to illustrate the roles of significantly different geology and geophysics, reservoir rocks, and reservoir heat contents in possible HDR developments.

  19. Effect of development stage on QTLs mapping for relative dry weight of rice under low-P stress

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@Interaction between genotype and environment is an important factor affecting quantitative trait. Studying the development stages′ influence on the detection of QTL for relative dry weight of rice associated with low phosphorus (P) stress could ascertain the appropriate value stage according to the difference of QTL location for the same trait. A total of 127 DH lines derived from anther culture of the F1 hybrid of ZYQ8 (Indica) / JX17 (Japonica) were selected as materials. The DH lines and their parents were planted randomly in 30 L plastic containers with four replications.Seedlings were collected 10 d after planted for determining root length(RL) and root surface area (RSA), and 30 d after planted for total dryweight (TDW) and root traits. Two P levels of 1 mol L-1(Low P) and 10 mol L-1 (Adequate P) were employed. QTLs were determined by interval mapping analysis with Mapmarker/QTL 1.1.

  20. Nuclear thermal source transfer unit, post-blast soil sample drying system

    Energy Technology Data Exchange (ETDEWEB)

    Wiser, Ralph S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Valencia, Matthew J [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-03

    Los Alamos National Laboratory states that its mission is “To solve national security challenges through scientific excellence.” [2] The Science Undergraduate Laboratory Internship (SULI) programs exists to engage undergraduate students in STEM work by providing opportunity to work at DOE facilities. [5] As an undergraduate mechanical engineering intern under the SULI program at Los Alamos during the fall semester of 2016, I had the opportunity to contribute to the mission of the Laboratory while developing skills in a STEM discipline. I worked with Technology Applications, an engineering group that supports non-proliferation, counter terrorism, and emergency response missions. This group specializes in tool design, weapons engineering, rapid prototyping, and mission training. I assisted with two major projects during my appointment Los Alamos. The first was a thermal source transportation unit, intended to safely contain a nuclear thermal source during transit. The second was a soil drying unit for use in nuclear postblast field sample collection. These projects have given me invaluable experience working alongside a team of professional engineers. Skills developed include modeling, simulation, group design, product and system design, and product testing.

  1. Moisture content in Dall's porpoise (Phocoenoides dalli) tissues: a reference base for conversion factors between dry and wet weight trace element concentrations in cetaceans

    Energy Technology Data Exchange (ETDEWEB)

    Yang Jian; Miyazaki, Nobuyuki

    2003-03-01

    Conversion factors were developed for Dall's porpoise tissues to convert trace element concentrations between dry and wet weight basis. - Concentration of trace elements measured by dry weight basis has become more commonly used in recent studies on cetaceans than wet weight basis, which was used more in earlier studies. Because few authors present moisture content data in their papers, it is difficult to compare the concentrations of trace elements between various studies. Therefore, we felt that it would be useful if a reference conversion factor (CF) for tissue types could be found to convert between wet weight and dry weight data on trace element concentrations. We determined the moisture contents of 14 tissues of Dall's porpoise (Phocoenoides dalli), and then, calculated the CF values for those tissues. Because the moisture content of each tissue differs from other tissues, it is necessary to use a specific CF for each tissue rather than a general CF for several tissues. We have also found that CF values for Dall's porpoise tissues are similar to the same tissues in other cetaceans. Therefore CF values from Dall's porpoise can be reliably used to convert between wet and dry weight concentrations for other cetacean tissues as reference data.

  2. Neonatal doses from X ray examinations by birth weight in a neonatal intensive care unit

    Energy Technology Data Exchange (ETDEWEB)

    Ono, K.; Akahane, K.; Aota, T.; Hada, M.; Takano, Y.; Kai, M.; Kusama, T

    2003-07-01

    The aim of this study was to investigate the frequency and type of X ray examinations performed on neonates classified according to their birth weight in a neonatal intensive care unit (NICU). In this study, the radiology records of 2408 neonates who were admitted to the NICU of Oita Prefectural Hospital between January 1994 and September 1999 were investigated. This study revealed that the neonates with earlier gestational ages and lower birth weights required longer NICU stays and more frequent X ray examinations made using a mobile X ray unit. The average number of X ray examinations performed on neonates of less than 750 g birth weight was 26 films per neonate. In regard to computed tomography and fluoroscopy, no significant relationship was found between the birth weight and number of X rays. This study revealed that the entrance-surface dose per neonate was dependent upon the birth weight, while the maximum dose was not dependent upon the birth weight. The average neonatal dose in the NICU was predominantly from computed tomography and fluoroscopy. The individual dose varied widely among neonates. (author)

  3. Is liquid heparin comparable to dry balanced heparin for blood gas sampling in intensive care unit?

    Directory of Open Access Journals (Sweden)

    Viswas Chhapola

    2014-01-01

    Full Text Available Introduction: Blood gas (BG analysis is required for management of critically ill patients in emergency and intensive care units. BG parameters can be affected by the type of heparin formulations used-liquid heparin (LH or dry balanced heparin (DBH. This study was conducted to determine whether blood gas, electrolyte, and metabolite estimations performed by using DBH and LH are comparable. Materials and Methods: A prospective study was conducted at pediatric intensive care unit (PICU of a tertiary care hospital. Paired venous samples were collected from 35 consecutive children in commercially prepared DBH syringes and custom-prepared LH syringes. Samples were immediately analyzed by blood gas analyzer and compared for pH, pCO 2 , pO 2 , HCO 3 - , Na + , K + , Cl - , and lactate. Paired comparisons were done and agreement was assessed by Bland-Altman difference plots. The 95% limits of absolute agreement (LOA were compared with the specifications for total allowable error (TEa. Results: The P values were significant for all measured parameters, with the exception of pCO 2 and K +. Bland-Altman difference plots showed wide LOA for pCO 2 , pO 2 , HCO3 - , Na + , K + , and Cl - when compared against TEa. For pCO 2 , HCO3 - , Na + , K + , and Cl - , 40%, 23%, 77%, 34%, and 54% of samples were outside the TEa limits, respectively, with LH. Conclusion: Our study showed that there is poor agreement between LH and DBH for the BG parameters pCO2, pO2, HCO3 - , K + , Na + , and Cl - and, thus, are not comparable. But for pH and lactate, LH and DBH can be used interchangeably.

  4. Dry Season Effect on Live Weight and some Body Dimensions of Working Donkeys in the Sudano-sahel Region of Cameroon

    Directory of Open Access Journals (Sweden)

    Ebangi, AL.

    2005-01-01

    Full Text Available Live weight (LW, heart girth (HG, trunk length (TL, body length (BL and height-at-withers (HW of 135 working donkeys, aged between two and 15 years, were monitored during the dry season of 1996 and 1997. This was to determine period(s of the dry season when feed supplementation and/or health care should be reinforced in preparation of high work demands during the rainy season. Variations in LW, HG, TL, BL, HW, HG:HW and TL:HW from start of the dry season to the start of the rainy season were highly significant (P< 0.001. Correlations between live weight and the other measures were positive and highly significant (P< 0.0001. Males showed weight gains between start of the cold-dry-season (CDS and start of the hot-dryseason (HDS. Weight gains in castrates were between start of the CDS and end of the HDS (April. Female donkeys maintained weight gains through out the dry season. Consequently, supplementation of castrates and males at the beginning (January and end (April of the HDS as to reinforce and maintain significant weight gains for maximize draught energy potential for rainy season work demands, is necessary. Where the female donkey express weight gain but poor bodied there will be need for supplementation in order to booster and enhance endurance. Also, estimates of HG, TL, BL, HW, HG:HW and TL:HW may be useful indicators for the selection of working donkeys as to optimize draft capacity and endurance for rainy season work demands.

  5. Possibilities of mercury removal in the dry flue gas cleaning lines of solid waste incineration units.

    Science.gov (United States)

    Svoboda, Karel; Hartman, Miloslav; Šyc, Michal; Pohořelý, Michael; Kameníková, Petra; Jeremiáš, Michal; Durda, Tomáš

    2016-01-15

    Dry methods of the flue gas cleaning (for HCl and SO2 removal) are useful particularly in smaller solid waste incineration units. The amount and forms of mercury emissions depend on waste (fuel) composition, content of mercury and chlorine and on the entire process of the flue gas cleaning. In the case of high HCl/total Hg molar ratio in the flue gas, the majority (usually 70-90%) of mercury is present in the form of HgCl2 and a smaller amount in the form of mercury vapors at higher temperatures. Removal of both main forms of mercury from the flue gas is dependent on chemical reactions and sorption processes at the temperatures below approx. 340 °C. Significant part of HgCl2 and a small part of elemental Hg vapors can be adsorbed on fly ash and solid particle in the air pollution control (APC) processes, which are removed in dust filters. Injection of non-impregnated active carbon (AC) or activated lignite coke particles is able to remove mainly the oxidized Hg(2+) compounds. Vapors of metallic Hg(o) are adsorbed relatively weakly. Much better chemisorption of Hg(o) together with higher sorbent capacity is achieved by AC-based sorbents impregnated with sulfur, alkali poly-sulfides, ferric chloride, etc. Inorganic sorbents with the same or similar chemical impregnation are also applicable for deeper Hg(o) removal (over 85%). SCR catalysts convert part of Hg(o) into oxidized compounds (HgO, HgCl2, etc.) contributing to more efficient Hg removal, but excess of NH3 has a negative effect. Both forms, elemental Hg(o) and HgCl2, can be converted into HgS particles by reacting with droplets/aerosol of poly-sulfides solutions/solids in flue gas. Mercury captured in the form of water insoluble HgS is more advantageous in the disposal of solid waste from APC processes. Four selected options of the dry flue gas cleaning with mercury removal are analyzed, assessed and compared (in terms of efficiency of Hg-emission reduction and costs) with wet methods and retrofits for more

  6. Correlated and cooperative motions in segmental relaxation: Influence of constitutive unit weight and intermolecular interactions

    Science.gov (United States)

    Rijal, Bidur; Soto Puente, Jorge Arturo; Atawa, Bienvenu; Delbreilh, Laurent; Fatyeyeva, Kateryna; Saiter, Allisson; Dargent, Eric

    2016-12-01

    This work clarifies the notion of correlated and cooperative motions appearing during the α-relaxation process through the role of the molecular weight of the constitutive units and of the interchain dipolar interactions. By studying amorphous copolymers of poly(ethylene-co-vinyl acetate) with different vinyl acetate contents, we show that the correlated motions are not sensitive to the interchain dipolar interactions, in contrast to the cooperative motions, which increase with a strengthening of the intermolecular interactions for this sample family. Concerning the influence of the molecular weight m0, the notion of "correlated motions" seems to be equivalent to the notion of "cooperative motions" only for low m0 systems.

  7. The comparative evaluation of patients′ body dry weight under hemodialysis using two methods: Bioelectrical impedance analysis and conventional method

    Directory of Open Access Journals (Sweden)

    Neda Alijanian

    2012-01-01

    Full Text Available Background: Dry weight (DW is an important concept related to patients undergoing hemodialysis. Conventional method seems to be time consuming and operator dependent. Bio impedance analysis (BIA is a new and simple method reported to be an accurate way for estimating DW. In this study, we aimed to compare the conventional estimation of DW with measuring DW by BIA. Materials and Methods: This study involved 130 uremic patients, performed in Isfahan, Iran. DW was calculated by both conventional (CDW and BIA (BIADW method and results were compared based on different grouping factors including sex, underlying cause of renal failure (RF (diabetic RF and non-diabetic RF, body mass index (BMI status, and sessions of hemodialysis. We also calculated the difference between DWs of 2 methods (DW diff = CDW-BIADW. Results: The mean of BIADW was significantly lower than CDW (57.20 ± 1.82 vs 59.36 ± 1.77, P value < 0.001. After grouping cases according to the underlying cause, BMI, sex, and dialysis sessions BIADW was significantly lower than CDW. Conclusion: Based on the combination of problems with CDW measurement which are corrected by BIA, and more clinical reliability of CDW, we concluded that although conventional method is a time-consuming and operator-dependent way to assess DW, DW could be estimated by combining both of these methods by finding the mathematic correlation between these methods.

  8. Genetic covariance functioners for live weight, condition score, and dry-matter intake measured at different lactations stages of Holstein-Friesian heifers

    NARCIS (Netherlands)

    Koenen, E.P.C.; Veerkamp, R.F.

    1998-01-01

    Genetic parameters for live weight, body condition score and dry-matter intake of dairy heifers were estimated using covariance function methodology. Data were from 469 heifers of the Langhill Dairy Cattle Research Centre and included observations during the first 25 weeks in lactation. Genetic

  9. Light-weight monocular display unit for 3D display using polypyrrole film actuator

    Science.gov (United States)

    Sakamoto, Kunio; Ohmori, Koji

    2010-10-01

    The human vision system has visual functions for viewing 3D images with a correct depth. These functions are called accommodation, vergence and binocular stereopsis. Most 3D display system utilizes binocular stereopsis. The authors have developed a monocular 3D vision system with accommodation mechanism, which is useful function for perceiving depth. This vision unit needs an image shift optics for generating monocular parallax images. But conventional image shift mechanism is heavy because of its linear actuator system. To improve this problem, we developed a light-weight 3D vision unit for presenting monocular stereoscopic images using a polypyrrole linear actuator.

  10. Light Weight Radioisotope Heater Unit (LWRHU) production for the Galileo mission

    Science.gov (United States)

    Rinehart, Gary H.

    The Light Weight Radioisotope Heater Unit (LWRHU) is a (Pu-238)O2-fueled heat source designed to provide a thermal watt of power for space missions. The LWRHU will be used to maintain the temperature of various components on the spacecraft at the required level. The heat source consists of a (Pu-238)O2-fuel pellet, a Pt-30 pct Rh capsule, a pyrolytic graphite insulator, and a woven graphite aeroshell assembly. Los Alamos National Laboratory has fabricated 134 heater units which will be used on the Galileo mission.

  11. Grain Yield, Dry Weight and Phosphorus Accumulation and Translocation in Two Rice (Oryza sativa L. Varieties as Affected by Salt-Alkali and Phosphorus

    Directory of Open Access Journals (Sweden)

    Zhijie Tian

    2017-08-01

    Full Text Available Salt-alkali is the main threat to global crop production. The functioning of phosphorus (P in alleviating damage to crops from saline-alkaline stress may be dependent on the variety of crop but there is little published research on the topic. This pot experiment was conducted to study if P has any effect on rice (Oryza sativa L. yield, dry matter and P accumulation and translocation in salt-alkaline soils. Plant dry weight and P content at heading and harvest stages of two contrasting saline-alkaline tolerant (Dongdao-4 and sensitive (Tongyu-315 rice varieties were examined under two saline-alkaline (light versus severe soils and five P supplements (P0, P50, P100, P150 and P200 kg ha−1. The results were: in light saline-alkaline soil, the optimal P levels were found for P150 for Dongdao-4 and for P100 for Tongyu-315 with the greatest grain dry weight and P content. Two rice varieties obtained relatively higher dry weight and P accumulation and translocation in P0. In severe saline-alkaline soil, however, dry weight and P accumulation and translocation, 1000-grain weight, seed-setting rate and grain yield significantly decreased, but effectively increased with P application for Dongdao-4. Tongyu-315 showed lower sensitivity to P nutrition. Thus, a more tolerant variety could have a stronger capacity to absorb and translocate P for grain filling, especially in severe salt-alkaline soils. This should be helpful for consideration in rice breeding and deciding a reasonable P application in saline-alkaline soil.

  12. The effect of reducing dietary energy density via the addition of water to a dry diet, on body weight, energy intake and physical activity in adult neutered cats.

    Science.gov (United States)

    Alexander, Janet E; Colyer, Alison; Morris, Penelope J

    2014-01-01

    Increasingly domestic cats live in an overfeeding and underexercising environment where obesity is a major health concern. One strategy to aid healthy body weight maintenance is dietary energy dilution. Published data indicate that increasing dietary moisture content leads to a reduction in energy intake and increased activity. However, a number of different methodologies were employed in these studies and associated changes in physical activity have only been measured once. The aim of the present study was to determine the effect of diets of three different moisture contents offered in excess of energy requirements, on body weight, energy intake and physical activity in adult neutered cats. Sixty-nine adult cats randomised into three groups, received 100 % of their daily individual maintenance energy requirements (IMER) of dry diet or dry diet hydrated to 40 or 80 % total moisture content (tmc). Baseline activity, intake, body weight and body composition were measured. Following this baseline phase, the cats received the same diets at 200 % of daily IMER and the measurements repeated over the next 28 d. When offered the diets at 200 % IMER, cats fed the dry diet significantly increased body weight and percentage of body fat (P  0·01). The levels of physical activity in cats offered the hydrated 80 % tmc diet were significantly (P healthy body weight maintenance in overfed cats.

  13. Dry deposition of reduced nitrogen in the United States Pacific Northwest for 2002

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This spatial data set was created by the U.S. Geological Survey (USGS) to represent the amount of dry deposition of reduced nitrogen in the Pacific Northwest region...

  14. Impact of dry weight determined by calf bioimpedance ratio on carotid stiffness and left ventricular hypertrophy in hemodialysis patients.

    Science.gov (United States)

    Zhou, Yi-Lun; Liu, Jing; Ma, LiJie; Sun, Fang; Shen, Yang; Huang, Jing; Cui, TaiGen

    2014-04-01

    Our previous study has shown that modification of bioimpedance technique by the measurement of bioimpedance ratio in the calf (calf-BR) was a simple and practical method in assessing fluid status in hemodialysis patients. However, the consequences of periodical dry weight (DW) adjustment under the guidance of calf-BR on target organ damage have not been investigated. One hundred fifteen hemodialysis patients were enrolled in this pilot trial. Patients were divided into bioimpedance group and control group according to their dialysis schedule. In the bioimpedance group, DW was routinely adjusted under the guidance of calf-BR every 3 months. In the control group, the assessment of DW remained a clinical judgment. Carotid stiffness, left ventricular mass index (LVMI), and calf-BR were measured at baseline and at the 12th month in both groups. Home blood pressure (BP) was monitored monthly. Episodes of dialysis-related adverse events were recorded. No significant differences were observed in parameters between the two groups at baseline. Compared with the control group, the bioimpedance group had significantly lower values in terms of the annual averages of systolic home BP (147.4 ± 15.3 mm Hg vs. 152.6 ± 16.9 mm Hg, P = 0.019), carotid stiffness index β (10.7 ± 3.3 vs. 12.2 ± 3.1, P = 0.003), LVMI (155.21 ± 15.64 g/m(2) vs. 165.17 ± 16.76 g/m(2) , P measurement improved arterial stiffness and left ventricular hypertrophy with good tolerability in hemodialysis patients.

  15. Integrated drying and incineration of wet sewage sludge in combined bubbling and circulating fluidized bed units.

    Science.gov (United States)

    Li, Shiyuan; Li, Yunyu; Lu, Qinggang; Zhu, Jianguo; Yao, Yao; Bao, Shaolin

    2014-12-01

    An original integrated drying and incineration technique is proposed to dispose of sewage sludge with moisture content of about 80% in a circulating fluidized bed. This system combines a bubbling fluidized bed dryer with a circulating fluidized bed incinerator. After drying, sewage sludge with moisture less than 20% is transported directly and continuously from the fluidized bed dryer into a circulating fluidized bed incinerator. Pilot plant results showed that integrated drying and incineration is feasible in a unique single system. A 100 t/d Sewage Sludge Incineration Demonstration Project was constructed at the Qige sewage treatment plant in Hangzhou City in China. The operational performance showed that the main operation results conformed to the design values, from which it can be concluded that the scale-up of this technique is deemed both feasible and successful.

  16. On the Origin of the Carat as the Unit of Weight for Gemstones

    Institute of Scientific and Technical Information of China (English)

    陶正章

    1991-01-01

    The carat is the unit of weight for diamonds and other gemstones.It corresponds to the average weight of the seeds of a leguminous tree.What kind of tree is this?We have studied the samples from Ethiopia,Egypt,Cyprus and the United States.The tree is neither"Kuara"nor"Locust"(Robina pseudoacacia Linn.),but rather Carob(Ceratonia Siliqua).In Ethiopia,as called by local inhabitants,"Kuara"is a species of Erythrina-E.brucei rather than E.abyssinica.As might be expected,using the seeds as a means of weighing an extremely valuable commodity is not very scientific.Before 1907,at various times and in various countries,there were at least twenty-three stan-dards for the carat ranging from 187.00mg to 215.990mg.The metric carat equal to 200mg was proposed in Paris in 1907.It was adopted in the United States on July1,1913 and now is the world-accepted standard.But in reality,the standard of the carat is still confused with respect to its usage throughout the world .This is why the author reiterates that the standard of the car-at should be integrated with the metric system.

  17. Olive paste oil content on a dry weight basis (OPDW: an indicator for optimal harvesting time in modern olive orchards

    Directory of Open Access Journals (Sweden)

    Zipori, I.

    2016-06-01

    Full Text Available In modern oil olive orchards, mechanical harvesting technologies have significantly accelerated harvesting outputs, thereby allowing for careful planning of harvest timing. While optimizing harvest time may have profound effects on oil yield and quality, the necessary tools to precisely determine the best date are rather scarce. For instance, the commonly used indicator, the fruit ripening index, does not necessarily correlate with oil accumulation. Oil content per fruit fresh weight is strongly affected by fruit water content, making the ripening index an unreliable indicator. However, oil in the paste, calculated on a dry weight basis (OPDW, provides a reliable indication of oil accumulation in the fruit. In most cultivars tested here, OPDW never exceeded ca. 0.5 g.g–1 dry weight, making this threshold the best indicator for the completion of oil accumulation and its consequent reduction in quality thereafter. The rates of OPDW and changes in quality parameters strongly depend on local conditions, such as climate, tree water status and fruit load. We therefore propose a fast and easy method to determine and monitor the OPDW in a given orchard. The proposed method is a useful tool for the determination of optimal harvest timing, particularly in large plots under intensive cultivation practices, with the aim of increasing orchard revenues. The results of this research can be directly applied in olive orchards, especially in large-scale operations. By following the proposed method, individual plots can be harvested according to sharp thresholds of oil accumulation status and pre-determined oil quality parameters, thus effectively exploiting the potentials of oil yield and quality. The method can become a powerful tool for scheduling the harvest throughout the season, and at the same time forecasting the flow of olives to the olive mill.En los modernos olivares, las tecnologías de recogida mecánica han acelerado significativamente la recogida

  18. COMPARATIVE STUDY OF THE BODY WEIGHT CHARACTERISTICS AND EFFECT OF DRYING ON CHEMICAL COMPOSITION OF THREE NILE FISH SPECIES (Oreochromis Niloticus, Labeo Niloticus AND Clarias Spp.)

    OpenAIRE

    Hassan M. YAGOUB ADAM; Ahmed Mohamed MUSA AHMED; Abdelwahab M ADAM IBRAHIM; Fathi MIRGHANI YOUSIF

    2015-01-01

    This study was carried out to compare the body weights of three different Nile fish species (Oreochromis niloticus, Labeo niloticus and Clarias spp.), and the impact of direct sun drying on their chemical composition.36 samples were collected (12 samples/ species). Averages of total length, standard length (cm) and gross body weight (gm) were determined and the findings were as follows: 36.5, 29.75 and 930 for Oreochromis niloticus, 49, 39.5 and 1210 for Labeo niloticus and 49, 45 and 977.5 f...

  19. [Prenatal care and birth weight: an analysis in the context of family health basic units].

    Science.gov (United States)

    Pedraza, Dixis Figueroa; Rocha, Ana Carolina Dantas; Cardoso, Maria Vera Lúcia Moreira Leitão

    2013-08-01

    To characterize prenatal care and to evaluate the association of its adequacy with maternal, socioeconomic and environmental sanitation characteristics, as well as the influence of these factors on the birth weight of the children. The eligible population for the study consisted of all women who had children during 2009 and lived in the city of Queimadas at the time of data collection. Information was collected with a questionnaire applied to the mothers in Family Health Basic Units or in their residence. The prenatal care adequacy index (outcome variable) was defined as adequate when the mother attended six or more prenatal visits and began monitoring during the first trimester of pregnancy (inadequate prenatal care and a multiple linear regression model was used to estimate the effect of adequacy of prenatal care and maternal, socioeconomic and environmental sanitation variables on birth weight. The statistical program used was Rv2.10.0, with the level of significance set at p prenatal care. After adjustment for other predictors, maternal age of 19 years or less remained as an explanatory variable of inadequate prenatal care (OR 4.27, 95%CI 1.10 - 15.89). Even after controlling for variables, child's birth weight was negatively associated with water supply from a well/spring and burnt/buried garbage, accounting for weight reductions of the order of 563.8, 262.0 and 951.9 g, respectively. Adequate prenatal care can alleviate the influence of socioeconomic disparities related to health care. Even in this situation, teenage mothers are more likely to receive inadequate prenatal care and low birth weight is favored by improper sanitation conditions (such as water supply and garbage disposal).

  20. A compact light-weighted and multi-purpose calibration unit for LINC-NIRVANA

    Science.gov (United States)

    De Bonis, Fulvio; Bertram, Thomas; Labadie, Lucas; Egner, Sebastian; Bizenberger, Peter; Hofferbert, Ralph; Eckart, Andreas; Kuerster, Martin; Herbst, Tom

    2010-07-01

    Laboratory and on-sky experience suggests that the integration of big astronomical instruments, specially of a complex interferometric system, is a challenging process. LINC-NIRVANA is the Fizeau interferometric imager for the Large Binocular Telescope (LBT). Simulating the final operating environment of every system component has shown how critical is the presence of flexures, vibrations and thermal expansion. Assembling and aligning the opto-mechanical sub-systems will require an absolute reference which is not affected by static displacements or positioning errors. A multi-purpose calibration unit has been designed to ensure the quality of the alignment of optics and detectors and the reliability of the mechanical setup. This new compact and light-weighted unit is characterized by sophisticated kinematics, simple mechanical design and composite materials. In addition, the reduced number of motorized axis improves the stiffness and lowers the angular displacements due to moving parts. The modular concept integrates several light sources to provide the proper calibration reference for the different sub-systems of LINC-NIRVANA. For the standard alignment of the optics an absolute reference fiber will be used. For flatfielding of the detectors the unit provides an integrating sphere, and a special rotating multi-fiber plate (infrared and visible) is used to calibrate the advanced adaptive optics and the fringe-tracking systems. A module to control non-common path aberrations (Flattening of Deformable Mirrors) is also provided.

  1. Prevalence and Risk Factors of Dry Eye Syndrome in a United States Veterans Affairs Population

    Science.gov (United States)

    GALOR, ANAT; FEUER, WILLIAM; LEE, DAVID J.; FLOREZ, HERMES; CARTER, DAVID; POUYEH, BOZORGMEHR; PRUNTY, WILLIAM J.; PEREZ, VICTOR L.

    2014-01-01

    PURPOSE To evaluate the prevalence of dry eye syndrome (DES) and its associated risk factors in a US Veterans Affairs population receiving ocular care services. DESIGN Retrospective study. METHODS SETTINGS Patients were seen in the Miami and Broward Veterans Affairs eye clinics between 2005 and 2010. PATIENTS POPULATION Patients were divided into cases and controls with regard to their dry eye status (cases = ICD9 code for DES plus dry eye therapy; controls = patients without ICD9 code plus no therapy). MAIN OUTCOME MEASURES The prevalence of DES and its associated risk factors. RESULTS A total of 16 862 patients were identified as either a dry eye case (n = 2056) or control (n = 14 806). Overall, 12% of male and 22% of female patients had a diagnosis of DES, with female gender imparting a 2.40 increased risk (95% confidence interval [CI] 2.04–2.81) over male gender. Several medical conditions were found to increase DES risk including post-traumatic stress disorder (odds ratio [OR] 1.97, 95% CI 1.75–2.23), depression (OR 1.91, 95% CI 1.73–2.10), thyroid disease (OR 1.81, 95% CI 1.46–2.26), and sleep apnea (OR 2.20, 95% CI 1.97–2.46) (all analyses adjusted for gender and age). The use of several systemic medications, including anti-depressant medications (OR 1.97, 95% CI 1.79–2.17), anti-anxiety medication (OR 1.74, 95% CI 1.58–1.91), and anti–benign prostatic hyperplasia medications (OR 1.68, 95% CI 1.51–1.86), was likewise associated with an increased risk of DES. CONCLUSIONS The prevalence of DES was found to be high in both men and women in our eye care population. This is the first study to demonstrate that in a veteran population, several diagnoses were significantly associated with DES, including post-traumatic stress disorder and depression. PMID:21684522

  2. Relative Merit of Mean Length of T-Unit and Sentence Weight as Indices of Syntactic Complexity in Oral Language.

    Science.gov (United States)

    Nutter, Norma

    1981-01-01

    Compares the use of sentence weight and the T-unit in measuring the oral language of 32 adolescents. Indicates the relative merits of the T-unit as a measure of oral language, because the two measures appeared to give much the same information about the speech samples examined. (RL)

  3. Salinity and Alkaline pH of Irrigation Water Affect Marigold Plants: I. Growth and Shoot Dry Weight Partitioning

    Science.gov (United States)

    Marigold, is one of the most popular annual ornamental plants. Both the short-statured cultivars (Tagetes patula L.) and the taller cultivars (T. erecta L.) are used as container plants, in landscape and garden settings. Tagetes erecta varieties make excellent cut and dried flowers for the florist...

  4. Real-time measurement system for tracking birefringence, weight, thickness, and surface temperature during drying of solution cast coatings and films

    Science.gov (United States)

    Unsal, E.; Drum, J.; Yucel, O.; Nugay, I. I.; Yalcin, B.; Cakmak, M.

    2012-02-01

    This paper describes the design and performance of a new instrument to track temporal changes in physical parameters during the drying behavior of solutions, as well as curing of monomers. This real-time instrument follows in-plane and out-of-plane birefringence, weight, thickness, and surface temperature during the course of solidification of coatings and films through solvent evaporation and thermal or photocuring in a controlled atmosphere. It is specifically designed to simulate behavior of polymer solutions inside an industrial size, continuous roll-to-roll solution casting line and other coating operations where resins are subjected to ultraviolet (UV) curing from monomer precursors. Controlled processing parameters include air speed, temperature, initial cast thickness, and solute concentration, while measured parameters are thickness, weight, film temperature, in-plane and out-of-plane birefringence. In this paper, we illustrate the utility of this instrument with solution cast and dried poly (amide-imide)/DMAc (Dimethylacetamide) solution, water based black paint, and organo-modified clay/NMP (N-Methylpyrrolidone) solution. In addition, the physical changes that take place during UV photo polymerization of a monomer are tracked. This instrument is designed to be generic and it can be used for tracking any drying/swelling/solidification systems including paper, foodstuffs such as; grains, milk as well as pharmaceutical thin paste and slurries.

  5. 基于综合加权评分法研究不同干燥方法对龙眼肉品质特性的影响%Influence of Different Drying Techniques on the Quality of Longan Pulps Based on Synthetic Weighted Mark Method

    Institute of Scientific and Technical Information of China (English)

    张良清; 邱佳容; 康彬彬; 余阳; 陈绍军; 甄文博; 陈团伟

    2015-01-01

    为了提高龙眼肉干制品的品质,采用太阳能辅助热泵干燥、微波真空干燥、热风干燥、热泵干燥等干燥方法对龙眼肉进行干制,并应用综合加权评分法对龙眼肉干制品感官品质、单位能耗、多糖含量等指标进行评价. 结果表明:太阳能辅助热泵干燥龙眼肉所测指标的综合加权评分在4种干燥方法中得分最高. 该方法可作为最佳干燥方法应用于生产.%In order to improve the quality of dried longan pulps ,the techniques of solar assisted heat pump drying,microwave vacuum drying ,hot air drying ,heat pump drying were applied to dried longan pulps and the synthetic weighted mark method has been used to give comprehensive effect of the longan pulps sensory quali -ty,unit energy consumption and polysaccharides content in the thesis.The results showed that the solar assisted heat pump drying was the highest comprehensive score in the 4 kinds of drying techniques ,it can be regarded as the best technology applied to the production.

  6. Safety analysis for the Galileo light-weight radioisotope heater unit

    Science.gov (United States)

    Johnson, Ernest W.

    The Light-Weight Radioisotope Heater Unit (LWRHU) will be used on the NASA Galileo Mission to provide thermal energy to the various systems on the orbiter and probe that are adversely affected by the low temperature a spacecraft encounters during a long interplanetary mission. Using these plutonia-fueled sources in 1-W increments permits employment of a single design and provides the spacecraft user the option of how many to use and where to position them to satisfy the proper thermal environment for components requiring such consideration. The use of the radioisotope Pu 238 in these devices necessitates the assessment of postulated radiological risks which might be experienced in case of accidents or malfunctions of the space shuttle or the spacecraft during phases of the mission in the vicinity of the earth. Included are data for the design, mission descriptions, postulated accidents with their consequences, test data, and the derived source terms and personnel exposures for the various events.

  7. Flow cytometry pulse width data enables rapid and sensitive estimation of biomass dry weight in the microalgae Chlamydomonas reinhardtii and Chlorella vulgaris.

    Directory of Open Access Journals (Sweden)

    Maurizio Chioccioli

    Full Text Available Dry weight biomass is an important parameter in algaculture. Direct measurement requires weighing milligram quantities of dried biomass, which is problematic for small volume systems containing few cells, such as laboratory studies and high throughput assays in microwell plates. In these cases indirect methods must be used, inducing measurement artefacts which vary in severity with the cell type and conditions employed. Here, we utilise flow cytometry pulse width data for the estimation of cell density and biomass, using Chlorella vulgaris and Chlamydomonas reinhardtii as model algae and compare it to optical density methods. Measurement of cell concentration by flow cytometry was shown to be more sensitive than optical density at 750 nm (OD750 for monitoring culture growth. However, neither cell concentration nor optical density correlates well to biomass when growth conditions vary. Compared to the growth of C. vulgaris in TAP (tris-acetate-phosphate medium, cells grown in TAP + glucose displayed a slowed cell division rate and a 2-fold increased dry biomass accumulation compared to growth without glucose. This was accompanied by increased cellular volume. Laser scattering characteristics during flow cytometry were used to estimate cell diameters and it was shown that an empirical but nonlinear relationship could be shown between flow cytometric pulse width and dry weight biomass per cell. This relationship could be linearised by the use of hypertonic conditions (1 M NaCl to dehydrate the cells, as shown by density gradient centrifugation. Flow cytometry for biomass estimation is easy to perform, sensitive and offers more comprehensive information than optical density measurements. In addition, periodic flow cytometry measurements can be used to calibrate OD750 measurements for both convenience and accuracy. This approach is particularly useful for small samples and where cellular characteristics, especially cell size, are expected to vary

  8. INVENTORY OF MOSQUITOES (DIPTERA: CULICIDAE) IN CONSERVATION UNITS IN BRAZILIAN TROPICAL DRY FORESTS.

    Science.gov (United States)

    Santos, Cleandson Ferreira; Silva, Alex Chavier; Rodrigues, Raquel Andrade; de Jesus, Jamilli Sanndy Ramos; Borges, Magno Augusto Zazá

    2015-01-01

    In Brazil, most studies of the Culicidae family are concentrated in rainforest regions. As such, there is a lack of knowledge regarding the diversity of Culicidae in regions with different climatic and vegetational characteristics. The aim of this study was to compile an inventory of Culicidae in protected areas of the semi-arid region of the state of Minas Gerais, Brazil, in order to better understand the diversity of the family within this region. The study was conducted across four protected areas in the northern region of the state, in tropical dry forest (TDF) fragments. Sampling methods included Shannon trap and CDC light trap, as well as active collection. A total of 11,219 mosquito specimens were collected between August 2008 and July 2012, belonging to 11 genera and 45 species; 15 new records for the state of Minas Gerais were registered, as well as 26 new records for semi-arid regions within the state. The high number of new Culicidae records in this region demonstrates the importance of inventory studies for increasing the knowledge of culicid biodiversity in Minas Gerais, and in particular within semi-arid regions of the state.

  9. INVENTORY OF MOSQUITOES (DIPTERA: CULICIDAE IN CONSERVATION UNITS IN BRAZILIAN TROPICAL DRY FORESTS

    Directory of Open Access Journals (Sweden)

    Cleandson Ferreira SANTOS

    2015-06-01

    Full Text Available In Brazil, most studies of the Culicidae family are concentrated in rainforest regions. As such, there is a lack of knowledge regarding the diversity of Culicidae in regions with different climatic and vegetational characteristics. The aim of this study was to compile an inventory of Culicidae in protected areas of the semi-arid region of the state of Minas Gerais, Brazil, in order to better understand the diversity of the family within this region. The study was conducted across four protected areas in the northern region of the state, in tropical dry forest (TDF fragments. Sampling methods included Shannon trap and CDC light trap, as well as active collection. A total of 11,219 mosquito specimens were collected between August 2008 and July 2012, belonging to 11 genera and 45 species; 15 new records for the state of Minas Gerais were registered, as well as 26 new records for semi-arid regions within the state. The high number of new Culicidae records in this region demonstrates the importance of inventory studies for increasing the knowledge of culicid biodiversity in Minas Gerais, and in particular within semi-arid regions of the state.

  10. Effect of Hibiscus sabdariffa L. Dried Calyx Ethanol Extract on Fat Absorption-Excretion, and Body Weight Implication in Rats

    Science.gov (United States)

    Carvajal-Zarrabal, O.; Hayward-Jones, P. M.; Orta-Flores, Z.; Nolasco-Hipólito, C.; Barradas-Dermitz, D. M.; Aguilar-Uscanga, M. G.; Pedroza-Hernández, M. F.

    2009-01-01

    The effect of Hibiscus sabdariffa L. (Hs) calyx extract on fat absorption-excretion and body weight in rats, was investigated. Rats were fed with either a basal diet (SDC = Control diet) or the same diet supplemented with Hs extracts at 5%, 10% and 15% (SD5, SD10 and SD15). Only SD5 did not show significant increases in weight, food consumption and efficiency compared to SDC. The opposite occurred in SD15 group which showed a significant decrease for these three parameters. The SD10 responses were similar to SD15, with the exception of food consumption. In both SDC and SD5 groups, no body weight loss was observed; however, only in the latter group was there a significantly greater amount of fatty acids found in feces. A collateral effect emerging from the study is that components of Hs extract at the intermediate and greater concentrations used in this experiment could be considered possible antiobesity agents. PMID:19756159

  11. Effect of Hibiscus sabdariffa L. Dried Calyx Ethanol Extract on Fat Absorption-Excretion, and Body Weight Implication in Rats

    Directory of Open Access Journals (Sweden)

    O. Carvajal-Zarrabal

    2009-01-01

    , and . Only did not show significant increases in weight, food consumption and efficiency compared to . The opposite occurred in group which showed a significant decrease for these three parameters. The responses were similar to , with the exception of food consumption. In both and groups, no body weight loss was observed; however, only in the latter group was there a significantly greater amount of fatty acids found in feces. A collateral effect emerging from the study is that components of Hs extract at the intermediate and greater concentrations used in this experiment could be considered possible antiobesity agents.

  12. Effect of empty fruit bunch to the accumulated plant height, mass of fresh and dry weight of tomato plant treated with organic and inorganic fertilizer

    Science.gov (United States)

    Elias, Aishah; Mutalib, Sahilah Abd.; Mustapha, Wan Aida Wan

    2016-11-01

    A glasshouse experiment was conducted to study the effect of different type of compost and fertilizers on the growth of tomato (Lycopersicon esculentum). The experiment consisted of sixteen treatments. Compost of Empty fruit bunch (EFB) and cow dung is mixed in the ratio of 3:2:1 (soil: compost: sand) and put into 25.4 mm2 polyethylene bag. Organic fertilizer of 10 ml were added twice a week, while inorganic fertilizer was applied at the rate of 3 g per polyethylene bag of soil three weeks after sowing. Treatment without fertilizer application was established as a control. The treatments were laid in a split-split plot design with three replications. Plant growth was assessed using accumulating plant height, fresh weight and dry weight. The application of organic plus inorganic fertilizer had significant effects on plant height. The application of organic fertilizer combination with cow dung gave significant difference to plant mass (fresh and dry). The data obtained from these treatments were significantly higher than the data obtained from the control (without fertilizer). In conclusion, the type of compost did not gave significant difference towards plant height while it only gave significant difference towards plant mass.

  13. Performance of ESPs operating downstream from spray-drying desulphurisation units

    Energy Technology Data Exchange (ETDEWEB)

    Ollero, P.; Canadas, L.; Salvador, L. [Escuela Superior de Ingenieros Industrials, Sevilla (Spain)] [and others

    1995-06-01

    This paper summarizes data from a Spray Dryer/ESP pilot plant located at the Los Barrios Coal Power Plant (Cadiz, Spain). A series of tests has been conducted to evaluate the performance of an existing ESP operating downstream from a spray dryer in a retrofit application. A factorial design of experiments with two SO{sub 2} levels, two flyash load levels, three Ca/S ratios and three sulfur removal efficiencies, was run during a six-month experimental programme. A global and a field-by-field analysis of the performance of the pilot ESP has shown that the desulphurisation unit enhances ESP efficiency and reduces the emission level. No evidence of electrical dust reentrainment has been found.

  14. Soil nutrients and liming on dry weight yields and forage quality of Signal grass (Brachiaria decumbens Stapf.), grown on Korat soil series (oxic paleustults) in northeast Thailand.

    Science.gov (United States)

    Pholsen, Suradej

    2010-07-01

    This experiment was carried out at Khon Kaen University Experimental Farm, Khon Kaen University, Thailand during the 2004-2005 aiming to investigate effect of phosphorus (P) and dolomite levels on dry weight yields (DWYs) and forage quality of Signal grass. A 4x3 factorial arranged in a Randomized Complete Block Design (RCBD) was used. Four P levels were: 0, 100, 200 and 400 kg P2O5 ha-1 and three dolomite levels were: 0, 625 and 2,500 kg ha-1. The Signal grass plants were grown on Korat soil series, (Oxic Paleustults). A quadrat with a dimension of 50x50 cm was used for grass yield harvests. Crude Protein (CP), Acid Detergent Fibre (ADF), Neutral Detergent Fibre (NDF) and Dry Matter Degradability (DMD) contents were determined. Tissues phosphorus and calcium contents were also analysed. The results showed that an increase in dolomite levels increased soil pH from 4.4 to 5.1 for levels 1 and 3, respectively. An increase in P levels increased available soil P from 4.56 to 28.38 ppm for levels 1 and 4, respectively. For the first year experiment, dolomite levels had no significant effect on DWYs, whilst P levels significantly increased but only up to level 2. The 2-year average DWYs reached 11,368 kg ha-1 for level 4 of P. With the first year rainy season harvests, P levels had its significant effect on ADF and DMD up to level 2 but not with CP and NDF. For the dry season harvests, P and dolomite levels had no significant effects on forage quality. Dolomite levels had no significant effect on P and Ca contents of the Signal grass tissues but an increase in P levels increased P contents. P and Ca contents, in most cases, were higher for the dry season than the rainy season.

  15. Community-weighted mean traits but not functional diversity determine the changes in soil properties during wetland drying on the Tibetan Plateau

    Science.gov (United States)

    Li, Wei; Epstein, Howard E.; Wen, Zhongming; Zhao, Jie; Jin, Jingwei; Jing, Guanghua; Cheng, Jimin; Du, Guozhen

    2017-02-01

    Climate change and human activities have caused a shift in vegetation composition and soil biogeochemical cycles of alpine wetlands on the Tibetan Plateau. The primary goal of this study was to test for associations between community-weighted mean (CWM) traits, functional diversity, and soil properties during wetland drying. We collected soil samples and investigated the aboveground vegetation in swamp, swamp meadow, and typical meadow environments. Four CWM trait values (specific leaf area is SLA, leaf dry matter content is LDMC, leaf area is LA, and mature plant height is MPH) for 42 common species were measured across the three habitats; three components of functional diversity (functional richness, functional evenness, and functional divergence) were also quantified at these sites. Our results showed that the drying of the wetland dramatically altered plant community and soil properties. There was a significant correlation between CWM of traits and soil properties, but not a significant correlation between functional diversity and soil properties. Our results further showed that CWM-LA, CWM-SLA, and CWM-LDMC had positive correlations with soil readily available nutrients (available nitrogen, AN; available phosphorus, AP), but negative correlations with total soil nutrients (soil organic carbon is SOC, total nitrogen is TN, and total phosphorus is TP). Our study demonstrated that simple, quantitative plant functional traits, but not functional diversity, are directly related to soil C and N properties, and they likely play an important role in plant-soil interactions. Our results also suggest that functional identity of species may be more important than functional diversity in influencing ecosystem processes during wetland drying.

  16. Light weight portable operator control unit using an Android-enabled mobile phone

    Science.gov (United States)

    Fung, Nicholas

    2011-05-01

    There have been large gains in the field of robotics, both in hardware sophistication and technical capabilities. However, as more capable robots have been developed and introduced to battlefield environments, the problem of interfacing with human controllers has proven to be challenging. Particularly in the field of military applications, controller requirements can be stringent and can range from size and power consumption, to durability and cost. Traditional operator control units (OCUs) tend to resemble laptop personal computers (PCs), as these devices are mobile and have ample computing power. However, laptop PCs are bulky and have greater power requirements. To approach this problem, a light weight, inexpensive controller was created based on a mobile phone running the Android operating system. It was designed to control an iRobot Packbot through the Army Research Laboratory (ARL) in-house Agile Computing Infrastructure (ACI). The hardware capabilities of the mobile phone, such as Wi- Fi communications, touch screen interface, and the flexibility of the Android operating system, made it a compelling platform. The Android based OCU offers a more portable package and can be easily carried by a soldier along with normal gear requirements. In addition, the one hand operation of the Android OCU allows for the Soldier to keep an unoccupied hand for greater flexibility. To validate the Android OCU as a capable controller, experimental data was collected evaluating use of the controller and a traditional, tablet PC based OCU. Initial analysis suggests that the Android OCU performed positively in qualitative data collected from participants.

  17. THE UNITED METHOD FOR THE CALCULATION OF SEEPAGE CONTROL BY ADOPTING WEIGHTING SOIL LAYER ON THE BACK SIDE OF DIKE

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Constructing a weighting soil layer at the downstream toe of dike on layered ground is an effective measure to prevent the foundation from blowout failures. In this paper, a series of differential equations describing the seepage flow in layered dike foundation were established, and a united method combining analytic method with one-dimensional finite difference method was proposed for solving the equations. The case study shows that the results calculated by the united method are considerably identical to the computational results of Finite Element Method (FEM), and the united method is very simple and easy compared to the FEM.

  18. Becoming Overweight Without Gaining a Pound: Weight Evaluations and the Social Integration of Mexicans in the United States.

    Science.gov (United States)

    Altman, Claire E; Van Hook, Jennifer; Gonzalez, Jonathan

    2017-01-01

    Mexican women gain weight with increasing duration in the United States. In the United States, body dissatisfaction tends to be associated with depression, disordered eating, and incongruent weight evaluations, particularly among white women and women of higher socioeconomic status. However, it remains unclear how overweight and obesity is interpreted by Mexican women. Using comparable data of women ages 20-64 from both Mexico (the 2006 Encuesta Nacional de Salud y Nutricion; N=17,012) and the United States (the 1999-2009 National Health and Nutrition Examination Surveys; N=8,487), we compare weight status evaluations among Mexican nationals, Mexican immigrants, U.S.-born Mexicans, U.S.-born non-Hispanic Whites, and U.S.-born non-Hispanic blacks. Logistic regression analyses, which control for demographic and social-economic variables and measured body mass index and adjust for the likelihood of migration for Mexican nationals, indicate that the tendency to self-evaluate as overweight among Mexicans converges with levels among non-Hispanic whites and diverges from blacks over time in the United States. Overall, the results suggest a U.S. integration process in which Mexican-American women's less critical self-evaluations originate in Mexico but fade with time in the United States as they gradually adopt U.S. white norms for thinner body sizes. These results are discussed in light of social comparison and negative health assimilation.

  19. Effect of salinity stress on chlorophyll content, proline, water soluble carbohydrate, germination, growth and dry weight of three seedling barley (Hordeum vulgare L. cultivars

    Directory of Open Access Journals (Sweden)

    Movafegh S.

    2012-11-01

    Full Text Available Salinity is a serious environmental constraint to crop production in many parts of the world and the development of crops with improved salt tolerance is proposed as part of solution to this problem. This research was performed out in order to study the effects of different salinity levels on germination, growth, dry weight, proline, water soluble carbohydrate and chlorophyll content of three barley (Hordeum vulgare L. cultivars named Jonoob (INC-54, Reyhan (INC-45 & Nosrat (INC -47.The experiment was carried out using factorial based on completely randomized design with three replications.Seven old seedlings after germination were transferred to Hoagland nutrient solution under the effect of salinity levels (0, 50, 150 and 250 mM NaClin during seven days. Data variance analysis showed that seed germination of three barley cultivars was significantly (PReyhan>Nosrat. The results showed that, increasing in salinity decreased all growth parameters. Salinity stress decreased shoot and root length, root dry weight and chlorophyll contents in every three cultivars. But decreasing of chlorophyll was less in Nosrat compared to two other items. Proline content and soluble carbohydrate were increased in all of the three cultivars with enhance of NaCl concentration. By increasing of salinity stress accumulation of proline and soluble sugar content in leaves of Nosrat cultivar was more than other cultivars.As saltiness increases resistance natural responses in this plant gets better considering less decrease in chlorophyll amount and strategy of more production about praline and sugar solution compared to two other items.

  20. [Study on weight units of chinese medicine in Sui and Tang dynasties].

    Science.gov (United States)

    Zhang, Rui-xian; Lu, Qin; Zhang, Wei; Zhang, Mu-qun

    2008-09-01

    Although there were changes in measuring system of Sui dynasty, the measuring units of medicine, astronomy and music still remained unchanged. So there appeared two systems of measuring units. For medicine, the government of Tang dynasty followed the regulations of Sui dynasty in measuring system. Besides this, the measuring units of Qian and Fen also were also related to medicine.

  1. Maternal education, birth weight, and infant mortality in the United States.

    Science.gov (United States)

    Gage, Timothy B; Fang, Fu; O'Neill, Erin; Dirienzo, Greg

    2013-04-01

    This research determines whether the observed decline in infant mortality with socioeconomic level, operationalized as maternal education (dichotomized as college or more, versus high school or less), is due to its "indirect" effect (operating through birth weight) and/or to its "direct" effect (independent of birth weight). The data used are the 2001 U.S. national African American, Mexican American, and European American birth cohorts by sex. The analysis explores the birth outcomes of infants undergoing normal and compromised fetal development separately by using covariate density defined mixture of logistic regressions (CDDmlr). Among normal births, mean birth weight increases significantly (by 27-108 g) with higher maternal education. Mortality declines significantly (by a factor of 0.40-0.96) through the direct effect of education. The indirect effect of education among normal births is small but significant in three cohorts. Furthermore, the indirect effect of maternal education tends to increase mortality despite improved birth weight. Among compromised births, education has small and inconsistent effects on birth weight and infant mortality. Overall, our results are consistent with the view that the decrease in infant death by socioeconomic level is not mediated by improved birth weight. Interventions targeting birth weight may not result in lower infant mortality.

  2. [Measurement units used in treatments to reduce weight and obesity. Systematic review].

    Science.gov (United States)

    Gutiérrez Hervás, Ana Isabel; Reig García-Galbis, Manuel; Rizo Baeza, M Mercedes; Cortés Castell, Ernesto; Mur Villar, Norma; Aguilar Cordero, M J

    2014-09-01

    There are different parameters to express the loss of weight in the treatment of overweight and obesity: absolute loss, percentage of loss, decrease in BMI, etc. To determine the magnitudes more used in the bibliography in order to establish criteria for uniformity in the expression of those results. a systematic review of the last five years has made at Proquest, CINHAL, Scopus, with descriptors "body fat distribution" and "diet" and "diet, reducing" and "weight loss". Articles published in English, French and Spanish were selected. Inclusion criteria were used: articles only dietary treatment of overweight in humans, and exclusion criteria: not dietary treatments, metabolic diseases, less than 50 patients and less than 8 weeks of treatment. Title, summary, methodology, results and discussion have been analysed by two researchers independently. 854 items found, only 61 met the criteria. These were grouped into 5 subgroups, as they expressed the weight loss (weight or fat loss in kg; weight and fat loss in kg; weight or fat loss in %; weight loss in % and fat loss in kg or vice versa; weight and far loss in%). The results show a lack of homogeneity in the loss, being the percentage the most used expression. There is great heterogeneity in the expression of results of the treatments for weight loss; the diet is one of the least used tools; the analysis of clinical trials of intervention reflects a high quality in subjects older than 18 years, highlighting the lack of this type of research lines in children under 18 years. Therefore, it should standardize the magnitudes of expression of the success of these treatments and increase the lines of research on this topic. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

  3. A New Weighting Function for Estimating Microwave Sounding Unit Channel 4 Temperature Trends Simulated by CMIP5 Climate Models

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xuanze; ZHENG Xiaogu; YANG Chi; LUO San

    2013-01-01

    A new static microwave sounding unit (MSU) channel 4 weighting function is obtained from using Coupled Model Inter-comparison Project,Phase 5 (CMIP5) historical multimodel simulations as inputs into the fast Radiative Transfer Model for TOVS (RTTOV vl0).For the same CMIP5 model simulations,it is demonstrated that the computed MSU channel 4 brightness temperature (T4) trends in the lower stratosphere over both the globe and the tropics using the proposed weighting function are equivalent to those calculated by RTTOV,but show more cooling than those computed using the traditional UAH (University of Alabama at Huntsville) or RSS (Remote Sensing Systems in Santa Rosa,California) static weighting functions.The new static weighting function not only reduces the computational cost,but also reveals reasons why trends using a radiative transfer model are different from those using a traditional static weighting function.This study also shows that CMIP5 model simulated T4 trends using the traditional UAH or RSS static weighting functions show less cooling than satellite observations over the globe and the tropics.Although not completely removed,this difference can be reduced using the proposed weighting function to some extent,especially over the tropics.This work aims to explore the reasons for the trend differences and to see to what extent they are related to the inaccurate weighting functions.This would also help distinguish other sources for trend errors and thus better understand the climate change in the lower stratosphere.

  4. Aflatoxin contamination of dried red chilies: Contrasts between the United States and Nigeria, two markets differing in regulation enforcement

    Science.gov (United States)

    Dried red chilies are among the world’s most consumed spices. From farm to fork, chilies go through cropping, harvest, drying, processing and storage. Chilies are susceptible to infection by aflatoxin producing fungi and subsequent contamination by aflatoxins at every stage. Aflatoxins are highly re...

  5. Wildlife and invertebrate response to fuel reduction treatments in dry coniferous forests of the Western United States: a synthesis

    Science.gov (United States)

    David S. Pilliod; Evelyn L. Bull; Jane L. Hayes; Barbara C. Wales

    2006-01-01

    This paper synthesizes available information on the effects of hazardous fuel reduction treatments on terrestrial wildlife and invertebrates in dry coniferous forest types in the West. We focused on thinning and/or prescribed fire studies in ponderosa pine (Pinus ponderosa) and dry-type Douglas-fir (Pseudotsuga menziesii),...

  6. Parenteral nutrition in very low birth weight infants in the United Kingdom and Ireland.

    LENUS (Irish Health Repository)

    Hopewell, J

    2012-02-01

    Parenteral nutrition (PN) plays an important role in providing nutrients for infants unable to tolerate enteral feeds study was to look at PN prescribing in neonatal units in the United Kingdom (U.K.) and Ireland, in particular in infants < 1.5 kg. A postal questionnaire was administered to the 235 neonatal units. The response rate was 179 (76%), of which 136 (76%) used PN. The initial amount of protein prescribed was 0.1-2 g\\/kg\\/day in 102 units (91%), >2 g\\/kg\\/day in 4 (4%) and 5 (5%) used no protein. 88 (80%) started lipids with the first PN prescription. Only 5 units (5%) started with >1 g\\/kg\\/day. The maximum dose of lipids and protein both varied from 2 - >4 g\\/kg\\/day. The initial glucose infusion rate was 4-8 mg\\/kg\\/min. Interestingly only 44% of units started PN in the first 24 hours of age. Hence results show great variation in PN prescribing.

  7. Univariate and Default Standard Unit Biases in Estimation of Body Weight and Caloric Content

    Science.gov (United States)

    Geier, Andrew B.; Rozin, Paul

    2009-01-01

    College students estimated the weight of adult women from either photographs or a live presentation by a set of models and estimated the calories in 1 of 2 actual meals. The 2 meals had the same items, but 1 had larger portion sizes than the other. The results suggest: (a) Judgments are biased toward transforming the example in question to the…

  8. Microwave-assisted on-spot derivatization for gas chromatography-mass spectrometry based determination of polar low molecular weight compounds in dried blood spots.

    Science.gov (United States)

    Sadones, Nele; Van Bever, Elien; Archer, John R H; Wood, David M; Dargan, Paul I; Van Bortel, Luc; Lambert, Willy E; Stove, Christophe P

    2016-09-23

    Dried blood spot (DBS) sampling and analysis is increasingly being applied in bioanalysis. Although the use of DBS has many advantages, it is also associated with some challenges. E.g. given the limited amount of available material, highly sensitive detection techniques are often required to attain sufficient sensitivity. In gas chromatography coupled to mass spectrometry (GC-MS), derivatization can be helpful to achieve adequate sensitivity. Because this additional sample preparation step is considered as time-consuming, we introduce a new derivatization procedure, i.e. "microwave-assisted on-spot derivatization", to minimize sample preparation of DBS. In this approach the derivatization reagents are directly applied onto the DBS and derivatization takes place in a microwave instead of via conventional heating. In this manuscript we evaluated the applicability of this new concept of derivatization for the determination of two polar low molecular weight molecules, gamma-hydroxybutyric acid (GHB) and gabapentin, in DBS using a standard GC-MS configuration. The method was successfully validated for both compounds, with imprecision and bias values within acceptance criteria (<20% at LLOQ, <15% at 3 other QC levels). Calibration lines were linear over the 10-100μg/mL and 1-30μg/mL range for GHB and gabapentin, respectively. Stability studies revealed no significant decrease of gabapentin and GHB in DBS upon storage at room temperature for at least 84 days. Furthermore, DBS-specific parameters, including hematocrit and volume spotted, were evaluated. As demonstrated by the analysis of GHB and gabapentin positive samples, "microwave-assisted on-spot derivatization" proved to be reliable, fast and applicable in routine toxicology. Moreover, other polar low molecular weight compounds of interest in clinical and/or forensic toxicology, including vigabatrin, beta-hydroxybutyric acid, propylene glycol, diethylene glycol, 1,4-butanediol and 1,2-butanediol, can also be

  9. Parent-child resemblance in weight status and its correlates in the United States.

    Directory of Open Access Journals (Sweden)

    Yinghui Liu

    Full Text Available BACKGROUND: Few studies have examined parent-child resemblance in body weight status using nationally representative data for the US. DESIGN: We analyzed Body Mass Index (BMI, weight status, and related correlates for 4,846 boys, 4,725 girls, and their parents based on US nationally representative data from the 2006 and 2007 Medical Expenditure Panel Survey (MEPS. Pearson partial correlation coefficients, percent agreement, weighted kappa coefficients, and binary and multinomial logistic regression were used to examine parent-child resemblance, adjusted for complex sampling design. RESULTS: Pearson partial correlation coefficients between parent and child's BMI measures were 0.15 for father-son pairs, 0.17 for father-daughter pairs, 0.20 for mother-son pairs, and 0.23 for mother-daughter pairs. The weighted kappa coefficients between BMI quintiles of parent and child ranged from -0.02 to 0.25. Odds ratio analyses found children were 2.1 (95% confidence interval (CI: 1.6, 2.8 times more likely to be obese if only their father was obese, 1.9 (95% CI: 1.5, 2.4 times more likely if only their mother was obese, and 3.2 (95% CI: 2.5, 4.2 times more likely if both parents were obese. CONCLUSIONS: Parent-child resemblance in BMI appears weak and may vary across parent-child dyad types in the US population. However, parental obesity status is associated with children's obesity status. Use of different measures of parent-child resemblance in body weight status can lead to different conclusions.

  10. Drying, reacting and cooling system in nitrogenous flame retardant unit%含氮阻燃剂装置的干燥反应冷却系统

    Institute of Scientific and Technical Information of China (English)

    谭永鹏; 韩志侃; 路原睿

    2011-01-01

    The design considerations and main equipment structure were introduced for the drying,reacting and cooling system in a nitrogenous flame retardant unit.The equipments were selected on the basis of design conditions.Compared with the hot air drying mode of spin flash drying and vibrated fluidized drying, the system had a lot of special advantages, so that it had been applied to industrial production successfully, thus providing an available method for the drying reaction of nitrogenous flame retardant.%介绍了含氮阻燃剂的干燥反应冷却工艺流程设计思路和主要设备结构.根据设计条件,进行了系统设备选型.与旋转闪蒸干燥、振动流化干燥等热风型干燥方式相比,桨叶干燥反应装置具有诸多优点.装置在工业生产中成功投用,为含氮阻燃剂的干燥反应提供了可供选择的途径.

  11. Corrective Action Investigation Plan for Corrective Action Unit 556: Dry Wells and Surface Release Points Nevada Test Site, Nevada (Draft), Revision 0

    Energy Technology Data Exchange (ETDEWEB)

    Grant Evenson

    2007-02-01

    Corrective Action Unit  (CAU) 556, Dry Wells and Surface Release Points, is located in Areas 6 and 25 of the Nevada Test Site, 65 miles northwest of Las Vegas, Nevada. Corrective Action Unit 556 is comprised of four corrective action sites (CASs) listed below: •06-20-04, National Cementers Dry Well •06-99-09, Birdwell Test Hole •25-60-03, E-MAD Stormwater Discharge and Piping •25-64-01, Vehicle Washdown and Drainage Pit These sites are being investigated because existing information on the nature and extent of potential contamination is insufficient to evaluate and recommend corrective action alternatives. Additional information will be obtained by conducting a corrective action investigation before evaluating corrective action alternatives and selecting the appropriate corrective action for each CAS. The results of the field investigation will support a defensible evaluation of viable corrective action alternatives that will be presented in the Corrective Action Decision Document.

  12. Identity and relationships of the Arboreal Caatinga among other floristic units of seasonally dry tropical forests (SDTFs) of north-eastern and Central Brazil.

    Science.gov (United States)

    Santos, Rubens M; Oliveira-Filho, Ary T; Eisenlohr, Pedro V; Queiroz, Luciano P; Cardoso, Domingos B O S; Rodal, Maria J N

    2012-02-01

    The tree species composition of seasonally dry tropical forests (SDTF) in north-eastern and central Brazil is analyzed to address the following hypotheses: (1) variations in species composition are related to both environment (climate and substrate) and spatial proximity; (2) SDTF floristic units may be recognized based on peculiar composition and environment; and (3) the Arboreal Caatinga, a deciduous forest occurring along the hinterland borders of the Caatinga Domain, is one of these units and its flora is more strongly related to the caatinga vegetation than to outlying forests. The study region is framed by the Brazilian coastline, 50th meridian west and 21st parallel south, including the Caatinga Domain and extensions into the Atlantic Forest and Cerrado Domains. Multivariate and geostatistic analyses were performed on a database containing 16,226 occurrence records of 1332 tree species in 187 georeferenced SDTF areas and respective environmental variables. Tree species composition varied significantly with both environmental variables and spatial proximity. Eight SDTF floristic units were recognized in the region, including the Arboreal Caatinga. In terms of species composition, its tree flora showed a stronger link with that of the Cerrado Dry Forest Enclaves. On the other hand, in terms of species frequency across sample areas, the links were stronger with two other units: Rock Outcrops Caatinga and Agreste and Brejo Dry Forests. There is a role for niche-based control of tree species composition across the SDTFs of the region determined primarily by the availability of ground water across time and secondarily by the amount of soil mineral nutrients. Spatial proximity also contributes significantly to the floristic cohesion of SDTF units suggesting a highly dispersal-limited tree flora. These units should be given the status of eco-regions to help driving the conservation policy regarding the protection of their biodiversity.

  13. Dry Eye

    Science.gov (United States)

    ... Eye > Facts About Dry Eye Facts About Dry Eye This information was developed by the National Eye ... the best person to answer specific questions. Dry Eye Defined What is dry eye? Dry eye occurs ...

  14. Toeplitz Operators on the Weighted Bergman Space over the Two-Dimensional Unit Ball

    Directory of Open Access Journals (Sweden)

    Alma García

    2015-01-01

    Full Text Available We extend the known results on commutative Banach algebras generated by Toeplitz operators with radial quasi-homogeneous symbols on the two-dimensional unit ball. Spherical coordinates previously used hid a possibility to detect an essentially wider class of symbols that can generate commutative Banach Toeplitz operator algebras. We characterize these new algebras describing their properties and, under a certain extra condition, construct the corresponding Gelfand theory.

  15. Clinical application of plasma brain natriuretic peptid to assess the dry weight of hemodialysis patient%血浆脑钠肽在评估血液透析患者干体重中的应用价值

    Institute of Scientific and Technical Information of China (English)

    王世进; 笪义生

    2012-01-01

    目的:观察血液透析(HD)患者调整干体重前后血浆脑钠肽(BNP)水平的变化,探讨BNP评估HD患者干体重的应用价值.方法:根据透析患者胸部X线片心胸比(CRT)、血压、下腔静脉内径(IVCD)、评估50例血液透析患者干体重,将患者分为干体重未达标组(A组)与达标组(B组)各25例,且将A组经过4周逐渐增加透析脱水量下调干体重达到临床干体重(D组).同时选取25名健康体检合格成人作为对照组(C组),测定血压、CRT、IVCD/体表面积(VCD)、BNP等数值.结果:A组BNP、CRT和VCD水平均显著高于B、C和D组(P<0.01),B、C和D组BNP、CRT和VCD水平差异均无统计学意义(P>0.05),且A组患者干体重调节前后BNP水平变化和VCD值、CRT之间均呈正相关关系(P<0.01).结论:BNP作为HD患者超水平负荷的指标,评估干体重有一定价值.%Objective: To observe the plasma brain natriuretic peptid ( BNP) levels of hemodialysis ( HD ) patient before and after adjustment of dry weight and explore its value in evaluating dry weight. Methods: Fifty HD patients were divided into group A ( no-reaching the dry weight standard, 25 cases) and group B ( reaching the dry weight standard, 25 cases) according to the dry weight evaulated by cardiac thoracic rate (CRT) , blood pressure, body weight and the inferior vena cava width(IVCD). The dry weight of partial patients from group A were adjusted to reach the clinical dry weight by increasing the dialysis dehydrated level for 4 weeks, which was divided into group D. Twenty-five healthy persons were divided into group C(control group) ,which blood pressure, CRT, VCD and BNP were measured. Results: The levels of BNP, CRT and VCD of group A were significantly higher than that of group B, C and D( P 0. 05 ) . BNP level changes of group A before and after adjustment of dry weight were positively related to its value of VCD and CRT( P < 0. 01) . Conclusions: BNP can be used as the water load index of HD patients

  16. Lifestyle Intervention for Weight Loss: a group-based program for Emiratis in Ajman, United Arab Emirates

    Directory of Open Access Journals (Sweden)

    Sadiya A

    2016-03-01

    Full Text Available Amena Sadiya,1,* Sarah Abdi,1,* Salah Abusnana2 1Lifestyle Clinic, 2Research and Education Department, Rashid Center for Diabetes and Research, Ajman, United Arab Emirates *These authors contributed equally to this work Background: Lifestyle Intervention for Weight Loss (LIFE-8 is developed as a structured, group-based weight management program for Emiratis with obesity and type 2 diabetes. It is a 3-month program followed by a 1-year follow-up. The results from the first 2 years are presented here to indicate the possibility of its further adaptation and implementation in this region. Methodology: We recruited 45 participants with obesity and/or type 2 diabetes based on inclusion/exclusion criteria. The LIFE-8 program was executed by incorporating dietary modification, physical activity, and behavioral therapy, aiming to achieve up to 5% weight loss. The outcomes included body weight, fat mass, waist circumference, blood pressure, fasting blood glucose (FBG, hemoglobin A1c (HbA1c, and nutritional knowledge at 3 months and 12 months. Results: We observed a reduction of 5.0% in body weight (4.8±2.8 kg; 95% CI 3.7–5.8, fat mass (–7.8%, P<0.01, and waist circumference (Δ=4±4 cm, P<0.01 in the completed participants (n=28. An improvement (P<0.05 in HbA1c (7.1%±1.0% vs 6.6%±0.7% and FBG (8.2±2.0 mmol/L vs 6.8±0.8 mmol/L was observed in participants with obesity and type 2 diabetes after the program. Increase in nutritional knowledge (<0.01 and overall evaluation of the program (9/10 was favorable. On 1-year follow-up, we found that the participants could sustain weight loss (–4.0%, while obese, type 2 diabetic participants sustained HbA1c (6.6%±0.7% vs 6.4%±0.7% and further improved (P<0.05 the level of FBG (6.8±0.8 mmol/L vs 6.7±0.4 mmol/L. Conclusion: LIFE-8 could be an effective, affordable, acceptable, and adaptable lifestyle intervention program for the prevention and management of diabetes in Emiratis. It was successful not

  17. Evaluation on Waste Volume and Weight from Decommissioning of Kori Unit 1 Reactor Vessel

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yujeong; Lee, Seong-Cheol; Kim, Chang-Lak [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-05-15

    In this paper, the concept of cutting reactor vessel and container for decommissioning Kori unit 1 has been investigated. As a result of the investigation, it is found that cutting the reactor vessel into small pieces, especially for upper and bottom heads of the reactor vessel, is more effective to reduce total disposal volume generated from decommissioning. As a part of continuing efforts to prepare shut down of nuclear power plant, several researches have been conducted to establish plans to dispose decommissioning waste from nuclear power plants. When decommissioning nuclear power plant, most of radioactive waste is generated from primary side including a reactor vessel. Radioactive waste amounts generated from decommissioning is significantly affected by several factors, such as dismantling method, waste classification, reactor lifetime, disposal method and etc.

  18. Inter-relationships between single carbon units' metabolism and resting energy expenditure in weight-losing patients with small cell lung cancer. Effects of methionine supply and chemotherapy

    DEFF Research Database (Denmark)

    Sengeløv, H; Hansen, O P; Simonsen, L;

    1994-01-01

    The one-carbon unit metabolism was investigated in 8 weight-losing patients with small cell carcinoma of the lung (SCLC). At diagnosis, 6 of the 8 patients had elevated formiminoglutamic acid (FIGLU) excretion after a histidine load, suggesting a lack of one-carbon units. In accordance, a signifi...

  19. The diagnostic accuracy of physical examination compared to lung ultrasound for determining lung congestion in hemodialysis patients who have reached their dry weight

    Science.gov (United States)

    Rahardjo, K. D.; Dharmaeizar; Nainggolan, G.; Harimurti, K.

    2017-08-01

    Research has shown that hemodialysis patients with lung congestion have high morbidity and mortality. Patients were assumed to be free of lung congestion if they had reached their post-dialysis dry weight. Most often, to determine if the patient was free of lung congestion, physical examination was used. However, the accuracy of physical examination in detecting lung congestion has not been established. To compare the capabilities of physical examination and lung ultrasound in detection of lung congestion, cross-sectional data collection was conducted on hemodialysis patients. Analysis was done to obtain proportion, sensitivity, specificity, positive predictive value, negative predictive value, and positive likelihood ratio. Sixty patients participated in this study. The inter observer variation of 20 patients revealed a kappa value of 0.828. When all 60 patients were taken into account, we found that 36 patients (57.1%) had lung congestion. Mild lung congestion was found in 24 (38.1%), and 12 (19%) had a moderate degree of congestion. In the analysis comparing jugular venous pressure to lung ultrasound, we found that sensitivity was 0.47 (0.31-0.63), specificity was 0.73 (0.54-0.86), positive predictive value (PPV) was 0.51 (0.36-0.67), negative predictive value (NPV) was 0.70 (0.49-0.84), positive likelihood ratio (PLR) was 1.75 (0.88-3.47), and the negative likelihood ratio (NLR) was 0.72 (0.47-1.12). In terms of lung auscultation, we found that sensitivity was 0.56 (0.39-0.71), specificity was 0.54 (0.35-0.71), PPV was 0.61 (0.44-0.76), NPV was 0.48 (0.31-0.66), PLR was 1.21 (0.73-2.0), and NLR was 0.82 (0.49-1.38). The results of our study showed that jugular venous distention and lung auscultation examination are not reliable means of detecting lung congestion.

  20. WEIGHTED LEAST SQUARE CONVERGENCE OF LAGRANGE INTERPOLATION ON THE UNIT CIRCLE

    Institute of Scientific and Technical Information of China (English)

    Xie Siqing

    2001-01-01

    In the paper, a result of Walsh and Sharma on least squareconvergence of Lagrange interpolation polynomials based on the n-th roots of unity is extended to Lagrange interpolation on the sets obtained by pro-jecting vertically the zeros of (1-x)2P.β (x),α>0,β>0, (1-x)p β (x),α>0,β>-1, (1+x)p ,(x) ,α>-1 ,β>0, and P (x ) ,α> - 1 ,β> - 1, respectively, onto the unit circle, where p ( ,β) (x ) ,α> - 1 , β> - 1, stands for the n-th Jacobi polynomial. Moreover, a result of Saff and Walsh is also extended.CLC Number:O17 Document ID:AFoundation Item:Project supported by NSFC under grant 10071039, and by Education Committee of Jiangsu Province under grant 00KJB110005.References:[1]Walsh,J.L. and Sharma,A.,Least Square Approximation and Interpolation in Roots of Unity,Pacific J. Math. ,14(1964),727-730.[2]Erdos,P. and Turán,P. ,On Interpolation I ,Ann. Math. ,38(1937),142-155.[3]Lozinsi,S.M.,Uber Interpolation (in Russian),Math. Sbornik (N.S.),8(1940),57-68.[4]Saff,E.B. and Walsh,J.L. ,On the Convergence of Rational Functions which Interpolate in the Roots of Unity,Pacific J. Math. 45(1973),639-641.[5]Sharma,A. and Vertesi,P. ,Mean Convergence and Interpolation in Roots of Unity,SIAM J.Math. Anal. ,14(1983),800-806.[6]Natason,I.P. ,Constructive Theory of Functions,Gostekhizdat,Moscow,1949.[7]Szego,G. ,Orthogoral Polynomials,Math. Soc. Colloq. Publ. ,Vol.[2]3 4th ed. Math. Soc. ,Providence,RI. ,1975.Manuscript Received:1999年9月13日Manuscript Revised:2001年5月8日Published:2001年9月1日

  1. [Hypothermia risk factors in the very low weight newborn and associated morbidity and mortality in a neonatal care unit].

    Science.gov (United States)

    García-Muñoz Rodrigo, F; Rivero Rodríguez, S; Siles Quesada, C

    2014-03-01

    Heat loss in the newborn after delivery could interfere with post-natal adaptation due to metabolic and hemodynamic instability. Associated perinatal factors and their relationship with morbidity and mortality during the neonatal period have not been systematically studied in our unit. To determine the temperature of very low birth weight (VLBW) infants on admission to our NICU, and to determine the associated perinatal variables, and the association of temperature with morbidity and mortality. Infants born in our maternity from January 2006 to November 2012, with birth weights (BW) 401 g to 1,499 g and/or less than 30 weeks gestational age, were included. A multivariate analysis was performed using the perinatal variables and the temperature on admission, as well as a logistic regression between these and the morbidity-mortality variables, in order to detect any independent associations. A total of 635 infants were included, with a mean (± SD) birth weight and gestational age of 1,137.6 ± 257.6g, and 29.5 ± 2.0 weeks, respectively. The mean admission temperature was 35.8 ± 0.6°C (range: 33.0-37.8°C). The proportion of infants with a temperature < 36°C was 44.4%. Independently associated perinatal variables were chorioamnionitis, birth weight, vaginal delivery, and advanced cardiopulmonary resuscitation (CPR). Admission hypothermia was associated with severe intraventricular haemorrhage (IVH) (grades 3 and 4) (OR: 0.377; 95% CI: 0.221-0.643; P<.001), and mortality (OR: 0.329; 95% CI: 0.208-0.519; P=.012). Hypothermia on admission is frequent among our VLBW infants. Birth weight, vaginal delivery, and advanced CPR were the principal variables associated with hypothermia. A low temperature on admission was related to an increased risk of IVH and mortality. Copyright © 2012 Asociación Española de Pediatría. Published by Elsevier Espana. All rights reserved.

  2. Bariatric Surgery in the United Kingdom: A Cohort Study of Weight Loss and Clinical Outcomes in Routine Clinical Care.

    Directory of Open Access Journals (Sweden)

    Ian J Douglas

    2015-12-01

    Full Text Available Bariatric surgery is becoming a more widespread treatment for obesity. Comprehensive evidence of the long-term effects of contemporary surgery on a broad range of clinical outcomes in large populations treated in routine clinical practice is lacking. The objective of this study was to measure the association between bariatric surgery, weight, body mass index, and obesity-related co-morbidities.This was an observational retrospective cohort study using data from the United Kingdom Clinical Practice Research Datalink. All 3,882 patients registered in the database and with bariatric surgery on or before 31 December 2014 were included and matched by propensity score to 3,882 obese patients without surgery. The main outcome measures were change in weight and body mass index over 4 y; incident diagnoses of type 2 diabetes mellitus (T2DM, hypertension, angina, myocardial infarction (MI, stroke, fractures, obstructive sleep apnoea, and cancer; mortality; and resolution of hypertension and T2DM. Weight measures were available for 3,847 patients between 1 and 4 mo, 2,884 patients between 5 and 12 mo, and 2,258 patients between 13 and 48 mo post-procedure. Bariatric surgery patients exhibited rapid weight loss for the first four postoperative months, at a rate of 4.98 kg/mo (95% CI 4.88-5.08. Slower weight loss was sustained to the end of 4 y. Gastric bypass (6.56 kg/mo and sleeve gastrectomy (6.29 kg/mo were associated with greater initial weight reduction than gastric banding (2.77 kg/mo. Protective hazard ratios (HRs were detected for bariatric surgery for incident T2DM, 0.68 (95% CI 0.55-0.83; hypertension, 0.35 (95% CI 0.27-0.45; angina, 0.59 (95% CI 0.40-0.87;MI, 0.28 (95% CI 0.10-0.74; and obstructive sleep apnoea, 0.55 (95% CI 0.40-0.87. Strong associations were found between bariatric surgery and the resolution of T2DM, with a HR of 9.29 (95% CI 6.84-12.62, and between bariatric surgery and the resolution of hypertension, with a HR of 5.64 (95% CI

  3. Bariatric Surgery in the United Kingdom: A Cohort Study of Weight Loss and Clinical Outcomes in Routine Clinical Care

    Science.gov (United States)

    Douglas, Ian J.; Bhaskaran, Krishnan; Batterham, Rachel L.; Smeeth, Liam

    2015-01-01

    Background Bariatric surgery is becoming a more widespread treatment for obesity. Comprehensive evidence of the long-term effects of contemporary surgery on a broad range of clinical outcomes in large populations treated in routine clinical practice is lacking. The objective of this study was to measure the association between bariatric surgery, weight, body mass index, and obesity-related co-morbidities. Methods and Findings This was an observational retrospective cohort study using data from the United Kingdom Clinical Practice Research Datalink. All 3,882 patients registered in the database and with bariatric surgery on or before 31 December 2014 were included and matched by propensity score to 3,882 obese patients without surgery. The main outcome measures were change in weight and body mass index over 4 y; incident diagnoses of type 2 diabetes mellitus (T2DM), hypertension, angina, myocardial infarction (MI), stroke, fractures, obstructive sleep apnoea, and cancer; mortality; and resolution of hypertension and T2DM. Weight measures were available for 3,847 patients between 1 and 4 mo, 2,884 patients between 5 and 12 mo, and 2,258 patients between 13 and 48 mo post-procedure. Bariatric surgery patients exhibited rapid weight loss for the first four postoperative months, at a rate of 4.98 kg/mo (95% CI 4.88–5.08). Slower weight loss was sustained to the end of 4 y. Gastric bypass (6.56 kg/mo) and sleeve gastrectomy (6.29 kg/mo) were associated with greater initial weight reduction than gastric banding (2.77 kg/mo). Protective hazard ratios (HRs) were detected for bariatric surgery for incident T2DM, 0.68 (95% CI 0.55–0.83); hypertension, 0.35 (95% CI 0.27–0.45); angina, 0.59 (95% CI 0.40–0.87);MI, 0.28 (95% CI 0.10–0.74); and obstructive sleep apnoea, 0.55 (95% CI 0.40–0.87). Strong associations were found between bariatric surgery and the resolution of T2DM, with a HR of 9.29 (95% CI 6.84–12.62), and between bariatric surgery and the resolution of

  4. CLOSURE REPORT FOR CORRECTIVE ACTION UNIT165: AREA 25 AND 26 DRY WELL AND WASH DOWN AREAS, NEVADA TEST SITE, NEVADA

    Energy Technology Data Exchange (ETDEWEB)

    BECHTEL NEVADA

    2005-12-01

    This Closure Report (CR) documents the closure activities for Corrective Action Unit (CAU) 165, Area 25 and 26 Dry Well and Washdown Areas, according to the Federal Facility Agreement and Consent Order (FFACO) of 1996. CAU 165 consists of 8 Corrective Action Sites (CASs) located in Areas 25 and 26 of the Nevada Test Site (NTS). The NTS is located approximately 105 kilometers (65 miles) northwest of Las Vegas, nevada. Site closure activities were performed according to the Nevada Division of Environmental Protection (NDEP)-approved Corrective Action Plan (CAP) for CAU 165. CAU 165 consists of the following CASs: (1) CAS 25-07-06, Train Decontamination Area; (2) CAS 25-07-07, Vehicle Washdown; (3) CAS 25-20-01, Lab Drain Dry Well; (4) CAS 25-47-01, Reservoir and French Drain; (5) CAS 25-51-02, Drywell; (6) CAS 25-59-01, Septic System; (7) CAS 26-07-01, Vehicle Washdown Station; and (8) CAS 26-59-01, Septic System. CAU 165, Area 25 and 26 Dry Well and Washdown Areas, consists of eight CASs located in Areas 25 and 26 of the NTS. The approved closure alternatives included No Further Action, Clean Closure, and Closure in Place with Administrative Controls.

  5. Performance of transonic fan stage with weight flow per unit annulus area of 198 kilograms per second per square meter (40.6(lb/sec)/sq ft)

    Science.gov (United States)

    Kovich, G.; Moore, R. D.; Urasek, D. C.

    1973-01-01

    The overall and blade-element performance are presented for an air compressor stage designed to study the effect of weight flow per unit annulus area on efficiency and flow range. At the design speed of 424.8 m/sec the peak efficiency of 0.81 occurred at the design weight flow and a total pressure ratio of 1.56. Design pressure ratio and weight flow were 1.57 and 29.5 kg/sec (65.0 lb/sec), respectively. Stall margin at design speed was 19 percent based on the weight flow and pressure ratio at peak efficiency and at stall.

  6. Outcome of Very Lov Birth Weight Infants in Neonatal Care Unit of Dicle University Faculty of Medicine

    Directory of Open Access Journals (Sweden)

    Selahattin Katar

    2006-01-01

    Full Text Available Our purpose was to determine mortality and morbidity rates and selected outcome variables for infants weighing less than 1500 g, who were admitted to the neonatal care unit of our hospital from April 2005 to February 2006.The number of VLBW admissions to the our neonatal care unit was 91, fourty one percent female and %49 were male. The mean birth weight was 1191±261 g and gestational age was 29±2.4 weeks. The mortality rate was 37.3 %. Antenatal steroids had been given to only 8% of mothers. The most important maternal risk factors were preeclampsia/eclampsia 30%, premature rupture of membranes 13%, hemorhage 8%. Respiratory distress syndrome was diagnosed 47%, surfactant was given to 40% of these infants. The major causes of death were sepsis, respiratuar distres syndrome, and extreme prematurity.Compared with reports from other developed NICU, VLBW infants at our center had higher mortality rates. We conclude that, the major cause of high mortality rate depends on low-social –cultural –education conditions associated with insufficient prenatal care, neonatal care and inaccurate neonatal transport in our region.

  7. Reentry response of the light weight radioisotope heater unit resulting from a Venus-Earth-Earth Gravity Assist maneuver accident

    Energy Technology Data Exchange (ETDEWEB)

    Hagan, J.C.

    1988-10-01

    Reentry analyses consisting of ablation response, thermal response and thermal stress response have been conducted on the Light Weight Radioisotope Heater Unit for Galileo/VEEGA reentry conditions. Sequential ablation analyses of the LWRHU aeroshell, the fuel clad, and the fuel pellet have been conducted in reentry regimes where the aeroshell has been deemed to fail. The failure criterion for ablation is assumed to be recession corresponding to 50% of the wall thickness (the design criterion recommended in the DOE Overall Safety Manual). Although the analyses have been carried far beyond this limit (as presented and discussed herein), JHU/APL endorses the position that failure may occur at the time that this recession is achieved or at lower altitudes within the heat pulse considering the uncertainties in the aerodynamic, thermodynamic, and thermo-structural analyses and modeling. These uncertainties result mainly because of the high energies involved in the VEEGA reentries compared to orbital decay reentries. Risk evaluations should consider the fact that for shallow flight paths the unit may disassemble at high-altitude as a result of ablation or may remain intact until it impacts with a clad that had been molten. 80 refs., 46 figs., 16 tabs.

  8. Retail marijuana purchases in designer and commercial markets in New York City: sales units, weights, and prices per gram.

    Science.gov (United States)

    Sifaneck, Stephen J; Ream, Geoffrey L; Johnson, Bruce D; Dunlap, Eloise

    2007-09-01

    This paper documents the bifurcation of the market for commercial marijuana from the market for designer marijuana in New York City. Commercial marijuana is usually grown outdoors, imported to NYC, and of average quality. By contrast, several varities of designer marijuana are usually grown indoors from specially bred strains and carefully handled for maximum quality. The mechanisms for marijuana sales include street/park sellers, delivery services, private sales, and storefronts. Retail sales units vary from 5 dollars to 50 dollars and more, but the actual weights and price per gram of retail marijuana purchases lacks scientific precision. Ethnographic staff recruited marijuana purchasers who used digital scales to weigh a purposive sample of 99 marijuana purchases. Results indicate clear differences in price per gram between the purchases of commercial (average 8.20 dollars/g) and designer (average 18.02 dollars/g) marijuana. Designer purchases are more likely to be made by whites, downtown (Lower East Side/Union Square area), via delivery services, and in units of 10 dollar bags, 50 dollar cubes, and eighth and quarter ounces. Commercial marijuana purchases are more likely to be made by blacks, uptown (Harlem), via street dealers, and in units of 5 dollar and 20 dollar bags. Imported commercial types Arizona and Chocolate were only found uptown, while designer brand names describing actual strains like Sour Diesel and White Widow were only found downtown. Findings indicate clear divisions between commercial and designer marijuana markets in New York City. The extent that these differences may be based upon different THC potencies is a matter for future research.

  9. Effect of Tactile-Kinesthetic Stimulation in weight gaining of pre-term infants hospitalized in intensive care unit

    Directory of Open Access Journals (Sweden)

    Keshavarz M

    2009-08-01

    Full Text Available "n Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Background: Many studies have demonstrated that pre-term neonates gained more weight over the 10 days stimulation period. This research has been conducted to determine the effects of five days Tactile- Kinesthetic stimulation (TKS on weight gaining of pre-term infants hospitalized in Fatemiye neonatal intensive care unit."n"n Methods: Fifty one babies who graduated from the NICU to the intermediate care nursery were randomly allocated into test and control groups (24 and 27 neonate respectively. TKS was provided for three 20 minute periods per day for five consecutive days to the test group, with the massages consisting of moderate pressure strokes in left and right lateral position and kinesthetic exercises consisting of flexion and extension of the limbs. They were observed for changes in physiologic parameters and weight gaining during five days stimulation in hospital."n"n Results: Over the five days TKS an increase in weight was seen in the test group (p=0.018, 43.1 vs 5.4. Infants in both the test and control groups were matched for mean weight before study and days in which they received antibiotics and photo therapy. Mean temperature and O² saturation had no meaningful difference, but an increase in

  10. Thinning and burning in dry coniferous forests of the Western United States: effectiveness in altering diameter distributions

    Science.gov (United States)

    Andrew Youngblood

    2010-01-01

    Western United States land managers are conducting fuel reduction and forest restoration treatments in forests with altered structural conditions. As part of the National Fire and Fire Surrogate (FFS) study, thinning and burning treatments were evaluated for changing forest structure. Shifts between pretreatment and posttreatment diameter distributions at seven western...

  11. Inter-relationships between single carbon units' metabolism and resting energy expenditure in weight-losing patients with small cell lung cancer. Effects of methionine supply and chemotherapy

    DEFF Research Database (Denmark)

    Sengeløv, H; Hansen, O P; Simonsen, L

    1994-01-01

    The one-carbon unit metabolism was investigated in 8 weight-losing patients with small cell carcinoma of the lung (SCLC). At diagnosis, 6 of the 8 patients had elevated formiminoglutamic acid (FIGLU) excretion after a histidine load, suggesting a lack of one-carbon units. In accordance, a signifi......The one-carbon unit metabolism was investigated in 8 weight-losing patients with small cell carcinoma of the lung (SCLC). At diagnosis, 6 of the 8 patients had elevated formiminoglutamic acid (FIGLU) excretion after a histidine load, suggesting a lack of one-carbon units. In accordance...... pretreatment FIGLU excretion and REE, although the REE measured in this group of patients was within the normal range. These data demonstrate an increased demand of "active" one-carbon units in energy consumption in a group of weight-losing cancer patients. The one-carbon unit deficit was reconditioned by oral......, a significant decrease of FIGLU excretion was observed in the patients after oral administration of DL-methionine for 4 days. The elevated FIGLU excretion was positively correlated to weight loss prior to diagnosis and negatively correlated to serum albumin at time of diagnosis. After 3 months of combination...

  12. Neurodevelopmental sequelae in premature newborns with extremely low weight and with very low weight at two years of age who left the Neonatal Intensive Care Unit of the Hospital Nacional Edgardo Rebagliati Martins 2009-2014

    Directory of Open Access Journals (Sweden)

    Carmen Fernández Sierra

    2017-02-01

    Full Text Available Objective: The purpose of this study is to describe the neurodevelopmental sequelae in premature newborns with extremely low weight and with very low weight at two years of age who left the Neonatal Intensive Care Unit of the Hospital Nacional Edgardo Rebagliati Martins. Materials and methods: A descriptive, retrospective, cross-sectional study in a population of 190 premature newborns with extremely low weight and with very low weight born from January 2009 to June 2014 who left the Neonatal Intensive Care Unit and took part in the follow-up program. The psychomotor development, sensorineural hearing loss, retinopathy of prematurity, presence of cerebral palsy and convulsive syndrome were assessed. Results: The average weight at birth was 1,180.53 ± 212.40 grams with a gestational age of 29.86 ± 2.33 weeks, and 51.58% of the newborns were male. Forty-two point six three percent (42.63% of the premature newborns with very low weight showed retardation of psychomotor development; 25.26%, retinopathy; 13.68%, sensorineural hearing loss; 3.68%, cerebral palsy; and 3.68%, convulsive syndrome. Fifty-two point two seven percent (52.27% of the premature newborns with extremely low weight showed retardation of psychomotor development; 50%, retinopathy; 15.91%, sensorineural hearing loss; and 2.27%, convulsive syndrome. Conclusions: Retardation of psychomotor development and retinopathy were the most important complications shown by premature newborns with extremely low weight and with very low weight at two years of age.

  13. [The use of dried grape press cake in pig fattening].

    Science.gov (United States)

    Herzig, I; Tomová, M; Holub, A; Pleskac, Z

    1979-12-01

    In dried grape press cake the content of crude nutrients and ash, overall sugar, amino acids, alpha-tocopherol and gross energy was determined. In biological experiments with pigs (total of 109 animals) 10% of mixture A1 or SOL was replaced by the same amount of dried crushed grape press cake, without affecting negatively the weight gains and consumption of mixtures per unit of weight gain. Nutritional effects of grape press cake are a subject of discussion and comprise three factors: higher content of enrgy (fat and sugars) in mixtures containing press cake, anti-oxidation effect of press cake and the effect of tocopherols on the metabolism of basic nutrients.

  14. Common bacterial blight resistance QTL BC420 and SU91 effect on seed yield, seed weight and canning quality in Dry Bean

    Science.gov (United States)

    Genetic resistance is useful for integrated control of common bacterial blight (CBB) disease which limits dry bean (Phaseolus vulgaris L.) production worldwide. Resistance QTL from tepary bean (Phaseolus acutifolius A. Gray) and other sources have been used to develop common bean lines with high lev...

  15. Performance of transonic fan stage with weight flow per unit annulus area of 208 kilograms per second per square meter (42.6 (lb/sec)/sq ft)

    Science.gov (United States)

    Urasek, D. C.; Kovich, G.; Moore, R. D.

    1973-01-01

    Performance was obtained for a 50-cm-diameter compressor designed for a high weight flow per unit annulus area of 208 (kg/sec)/sq m. Peak efficiency values of 0.83 and 0.79 were obtained for the rotor and stage, respectively. The stall margin for the stage was 23 percent, based on equivalent weight flow and total-pressure ratio at peak efficiency and stall.

  16. Genotype by Country Interaction for Birth and Weaning Weights for Shorthorn Cattle in Australia and the United States

    Directory of Open Access Journals (Sweden)

    Kecha KUHA

    2004-06-01

    Full Text Available Birth (BW and weaning weights (WW of Shorthorn beef cattle used to study the genotype by country (G´C interactions between Australia (AU and the United States (US. Data were collected depending on the connectedness on genetic links of common sires. The edited data consisted of numbers of sire, dam and calf of 2,013, 19,784 and 42,963 in AU and 4,797, 38,648 and 95,849 in the US, respectively. After that, sets of data were combined together and corresponding traits from different countries were treated as different traits. Therefore, a bivariate animal model including maternal genetic and permanent environment effects was used to study the interactions. No covariance due to maternal permanent environmental and environmental effects {cov(pe1,pe2 and cov(e1,e2 = 0} was assumed. Estimates of (covariance components have been done by restricted maximum likelihood. Variance component estimates of the same trait across countries were slightly different. Direct and maternal genetic correlations (in parentheses between corresponding traits were 0.93 (0.93 and 0.78 (0.86 for BW and WW, respectively. This implied that a joint BW genetic evaluation could be conducted using a model that treated the information as a single population. For WW, sires across AU and the US needed evaluation to consider carefully the G´C interactions.

  17. Comparison of the Output in Weighted Work Units of Installation Dental Laboratories with that of Regional Dental Activities. Part II.

    Science.gov (United States)

    1980-07-01

    78234 . 1 July f98O __ Final .ep.ar.JJ.- Approved for Public Release Distribution Limited Prepared for: >p- UNITED STATES ARMY HEALTH SERVICES COMMAND...personnel for the typing of the manuscript and preparation of tables and graphs. v TABLE OF CONTENTS Section Page SUMMARY...Partial Veneer Crowns/ Onlays 30/Unit 13 Castings 10/Unit 14 Post and Core 25/Unit 15 Precision Connector, FPD 75/Unit 16 Andrews Bridge 150/Unit 17

  18. Sound reduction management in the neonatal intensive care unit for preterm or very low birth weight infants.

    Science.gov (United States)

    Almadhoob, Abdulraoof; Ohlsson, Arne

    2015-01-30

    dysplasia, intraventricular haemorrhage, periventricular leukomalacia, retinopathy of prematurity).2. To evaluate the effects of sound reduction on sleep patterns at three months of age.3. To evaluate the effects of sound reduction on staff performance.4. To evaluate the effects of sound reduction in the neonatal intensive care unit (NICU) on parents' satisfaction with the care. We searched the Cochrane Central Register of Controlled Trials (The Cochrane Library), MEDLINE, EMBASE, CINAHL, abstracts from scientific meetings, clinical trials registries (clinicaltrials.gov; controlled-trials.com; and who.int/ictrp), Pediatric Academic Societies Annual meetings 2000 to 2014 (Abstracts2View(TM)), reference lists of identified trials, and reviews to November 2014. Preterm infants (sound reduction. We made a deviation from our protocol and included this study in which some infants would have been > 48 hours old. There was no significant difference in weight at 34 weeks postmenstrual age (PMA): mean difference (MD) 111 g (95% confidence interval (CI) -151 to 374 g) (n = 23). There was no significant difference in weight at 18 to 22 months corrected age between the groups: MD 0.31 kg, 95% CI -1.53 to 2.16 kg (n = 14). There was a significant difference in Mental Developmental Index (Bayley II) favouring the silicone earplugs group at 18 to 22 months corrected age: MD 14.00, 95% CI 3.13 to 24.87 (n = 12), but not for Psychomotor Development Index (Bayley II) at 18 to 22 months corrected age: MD -2.16, 95% CI -18.44 to 14.12 (n =12). To date, only 34 infants have been enrolled in a randomised controlled trial (RCT) testing the effectiveness of reducing sound levels that reach the infants' ears in the NICU. Based on the small sample size of this single trial, we cannot make any recommendations for clinical practice. Larger, well designed, conducted and reported trials are needed.

  19. 负钠梯度透析对处于干体重的透析患者高血压的影响%Effects of Negative Sodium Gradient Dialysis on Hypertension in Hemodialysis Patients on Dry Weight

    Institute of Scientific and Technical Information of China (English)

    刘婧; 马丽洁; 孙芳; 沈洋; 黄静; 周亦伦

    2014-01-01

    Objective:To observe the effects of increasing sodium diffusive removal by the negative sodium gradient dialysis on blood pressure in hemodialysis patients on dry weight. Methods:16 hypertensive hemodialysis patients on dry weight were enrolled, whose predialysis plasma sodium levels were higher than 138 mmol/L,After a 1-month period with standard dialysate sodium concen-tration of 138 mmol/L( baseline) ,the patients were followed up for a 4-month period with dialysate sodium set at 136 mmol/L,with-out change in instructions to patients about dietary sodium intake. During the period of study,the dry weight was adjusted under the guidance of bioimpedance spectroscopy,to maintain post-dialysis volume status within normal range. The changes of home blood pres-sure and interdialytic weight gain were recorded. Results:(1) Home blood pressure progressively decreased, attained statistical signif-icance by the end of month 2;there was an average fall of 14. 6 mmHg in home systolic blood pressure and 9. 6mmHg in home dias-tolic blood pressure by the end of month 4. (2) The post-dialysis volume parameters remained constant throughout the study period. Interdialytic weight gain adjusted to the estimated dry weight mildly but significantly decreased ( 4. 81 ±1. 51 )% vs ( 4. 36 ±1. 37)%,p=0. 047). Conclusion:In selected hypertensive hemodialysis patients on dry weight, negative sodium gradient dialysis re-sulted in significant blood pressure decrease. It was most likely due to the volume-independent effect.%目的:拟观察负钠梯度透析对已处于干体重的血液透析( HD)患者高血压的影响。方法:研究入选16例生物电阻抗法评估已处于干体重的透析高血压患者,透析前血钠浓度高于138 mmol/L。以本透析中心标准透析液( Na+浓度为138 mmol/L)透析1个月作为基线,降低透析液Na+浓度至136 mmol/L透析4个月。期间不改变患者饮食钠摄入量,每月使用生物电阻抗技术调整透析后容量状况

  20. Dynamics of Drying in Phenolically Tanned Materials

    Institute of Scientific and Technical Information of China (English)

    Julian F. V. Vincent

    2004-01-01

    The cuticle of a maggot goes through a mechanical transition when it dries, increasing in stiffness by about an order of magnitude (e. g. from 0.5 GPa to 5 GPa) as the water content drops from about 1 g/g (weight of water per unit dry weight) to 0.4 g/g. Thus stiffness represents the loss of freezable water and is more or less diagnostic of a material stabilized by hydrogen bonds. Further loss in water results in a smaller increase in stiffness. In natural systems the water content is controlled by the addition of phenolic residues, resulting in tanning or sclerotisation, which drives the matrix components towards co-operative interaction and makes the material permanently waterproof.

  1. The effects of music on the selected stress behaviors, weight, caloric and formula intake, and length of hospital stay of premature and low birth weight neonates in a newborn intensive care unit.

    Science.gov (United States)

    Caine, J

    1991-01-01

    The purpose of this study was to examine the effects of music on selected stress behaviors, weight, caloric and formula intake, and length of hospital stay. Subjects were 52 preterm and low birth weight newborns in a newborn intensive care unit (NBICU) who were in stable condition and restricted to isolettes. Subjects in the experimental and control groups were matched for equivalency based on sex, birth weight, and diagnostic criticality. Eleven males and 15 females were assigned to the control group and received routine auditory stimulation. The experimental group of 11 males and 15 females received music stimulation, which consisted of approximately 60 minutes of tape recorded vocal music, including lullabies and children's music, and routine auditory stimulation. Thirty-minute segments of the recording were played alternatively with 30 minutes of routine auditory stimulation three times daily. Exposure to music stimulation occurred only during the infants' stay in the NBICU. Results suggest music stimulation may have significantly reduced initial weight loss, increased daily average weight, increased formula and caloric intake, significantly reduced length of the NBICU and total hospital stays, and significantly reduced the daily group mean of stress behaviors for the experimental group. Data analyses suggest the length of hospital stay may be correlated with the amount of stress experienced by the neonate and not with weight gains. Theoretical and practical aspects of these results are discussed.

  2. Models to estimate the bunch dry weight in African oil palm (Elaeis guineensis Jacq., American oil palm (Elaeis oleifera H.B.K. Cortes and the interspecific hybrid (E. oleifera x E. guineensis

    Directory of Open Access Journals (Sweden)

    Contreras B Ángela P.

    2012-04-01

    Full Text Available

    Statistical models were used to estimate the bunch dry weight through indirect nondestructive methods in African oil palm (Elaeis guineensis American oil palm (Elaeis oleifera and the interspecific hybrid (E. oleifera x E. guineensis; and compared with the formula proposed by Corley. The studies were conducted at Santa Barbara and Chaparral-Cuernavaca on the Unipalma plantation, located in the eastern palm region of Colombia. Ten palms were selected for each group and 30 bunches were sampled for six months. Polynomial and exponential statistical models were postulated, with the best being linear without intercept. The results confirm and validate the usefulness of the model formulated to estimate the bunch dry weight of African oil palm (E. guineensis, American oil palm (E. oleifera and the interspecific hybrid (OxG; however, it proved more convenient to use the models proposed in this study because they are tailored to the specific environmental conditions of the eastern palm region of Colombia.

  3. Socio-Demographic and Dietary Factors Associated with Excess Body Weight and Abdominal Obesity among Resettled Bhutanese Refugee Women in Northeast Ohio, United States

    Directory of Open Access Journals (Sweden)

    Madhav P. Bhatta

    2014-06-01

    Full Text Available Studies of obesity and related health conditions among the Bhutanese, one of the largest refugee groups resettled in the United States in the past five years, are limited. This study examined the factors associated with excess body weight (body mass index ≥ 23 kg/m2 and abdominal obesity (waist circumference > 80 cm in a community-based sample of 18–65 year old Bhutanese refugee women in Northeast Ohio. A Nepali-language questionnaire was used to measure socio-demographic and dietary factors. Height, weight, and waist circumference were measured to define excess body weight and abdominal obesity. The mean (±standard deviation age of the 108 participants was 36.5 (±12.2 years and length of time in the U.S. was 19.4 (±11.9 months. Overall, 64.8% and 69.4% of the women had excess body weight and abdominal obesity, respectively. Age was significantly associated with both excess body weight (odds ratio: 1.10; 95% confidence interval: 1.05–1.16 and abdominal obesity (1.09; 1.04–1.14. Consuming meat (4.01; 1.14–14.60 was significantly associated with excess body weight but not abdominal obesity. These findings suggest the need for lifestyle and dietary change education programs among this new and vulnerable group to reduce the prevalence of excess body weight and abdominal obesity and their health consequences.

  4. Estimation and comparison of EQ-5D health states' utility weights for pneumococcal and human papillomavirus diseases in Argentina, Chile, and the United Kingdom.

    Science.gov (United States)

    Galante, Julieta; Augustovski, Federico; Colantonio, Lisandro; Bardach, Ariel; Caporale, Joaquin; Marti, Sebastian Garcia; Kind, Paul

    2011-01-01

    To estimate and compare EuroQol instrument (EQ-5D) health states' values for pneumococcal and human papillomavirus (HPV) diseases in Argentina, Chile, and the United Kingdom. Twelve vignettes were designed, pilot-tested, and administered to a convenience sample in a cross-sectional design to elicit descriptive EQ-5D state data. Country-specific EQ-5D time-trade-off-based weights were used to map these descriptive health states into local country preference weights. Descriptive analysis is reported and intercountry differences for each condition were compared using repeated measures analysis of variance. Seventy-three subjects completed the survey. Pneumococcal disease-related health states mean values ranged from -0.331 (sepsis, Chile) to 0.727 (auditive sequelae, Argentina). HPV-related conditions ranged from 0.152 (cervical cancer, United Kingdom) to 0.848 (cervical intraepithelial neoplasia 1, Argentina). Chile had consistently the lowest mean values in pneumococcal states and in one HPV state, whereas those of the United Kingdom were the lowest in most HPV states. Argentina had the highest mean values in both diseases. Differences in country-specific values for each health state were statistically (P < 0.001) significant except for six health states in which differences between Chilean and United Kingdom weights were nonsignificant. Utility values for most conditions differed statistically relevantly among analyzed countries, even though the same health states' descriptive set was valued for each. These results reflect the difference in social weights among different countries, which could be attributed to either different population values or valuation study methodologies. They stress the importance of using local preference weights for context-specific decision making. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  5. Glucose, stem dry weight variation, principal component and cluster analysis for some agronomic traits among 16 regenerated Crotalaria juncea accessions for potential cellulosic ethanol

    Science.gov (United States)

    The United State Department of Agriculture (USDA), Agricultural Research Service, (ARS), Plant Genetic Resources Conservation Unit’s (PGRCU) sunn hemp (Crotalaria juncea L.) germlasm collection consists of 22 accessions. Sixteen (16) accessions of the most seed productive were selected. These access...

  6. Morbidity and mortality of low birth weight infants in the new born unit of Kenyatta National Hospital, Nairobi.

    Science.gov (United States)

    Simiyu, D E

    2004-07-01

    Morbidity and mortality of low birth weight (LBW) infants at Kenyatta National Hospital (KNH) has previously been found to be high. Other centres have shown that even with lack of neonatal intensive care facilities, selective interventions can be implemented that improve neonatal survival rates. It is important to identify those factors at KNH that when selectively modified, will improve the quality of care hence survival rates. To quantify the morbidity and mortality of LBW infants in KNH. To audit the quality of care and identify factors that can be selectively modified to improve the quality of care and improve the currently low survival rates. Retrospective study utilising case notes. New born unit, Kenyatta National Hospital, Nairobi. All LBW infants admitted to the NBU at KNH from January to December 2000. Out of an expected 694 files, 533 (77%) were studied. The male to female ratio and LBW to VLBW ratio was 1:1 respectively. Small for gestational age (SGA) accounted for 11.6%. Overall mortality was 57.4% (574/1000 admissions) while mortality for SGA was 37%. Infants born out of KNH had significantly higher mortality (p=0.0047). Compared to Caeserian delivery, infants born via spontaneous vertex delivery had higher mortality (p=0.0087). The leading diagnoses on admission or death were respiratory distress(69%), apnoeic attacks (42%) suspected sepsis and jaundice (37% each), hypothermia(27%) and anaemia(17%). By time of death or discharge, 43% had no laboratory investigations done. While 37% had suspected sepsis, only 14% had blood culture done. Antibiotics were started in 460 (86%) of infants yet only 37% had diagnosis of suspected sepsis. Change of antibiotics was guided by culture and sensitivity reports in only 62(13.5%). Apnoeic spells were managed with rectal aminophyline in 156(29%) infants of whom 19(12%) survived. The terminal events for the dead infants included recurrent apnoeic spells. The only mode of nutrition was enteric feeding in 59% with

  7. Changes in Intake of Fruits and Vegetables and Weight Change in United States Men and Women Followed for Up to 24 Years: Analysis from Three Prospective Cohort Studies.

    Science.gov (United States)

    Bertoia, Monica L; Mukamal, Kenneth J; Cahill, Leah E; Hou, Tao; Ludwig, David S; Mozaffarian, Dariush; Willett, Walter C; Hu, Frank B; Rimm, Eric B

    2015-09-01

    Current dietary guidelines recommend eating a variety of fruits and vegetables. However, based on nutrient composition, some particular fruits and vegetables may be more or less beneficial for maintaining or achieving a healthy weight. We hypothesized that greater consumption of fruits and vegetables with a higher fiber content or lower glycemic load would be more strongly associated with a healthy weight. We examined the association between change in intake of specific fruits and vegetables and change in weight in three large, prospective cohorts of 133,468 United States men and women. From 1986 to 2010, these associations were examined within multiple 4-y time intervals, adjusting for simultaneous changes in other lifestyle factors, including other aspects of diet, smoking status, and physical activity. Results were combined using a random effects meta-analysis. Increased intake of fruits was inversely associated with 4-y weight change: total fruits -0.53 lb per daily serving (95% CI -0.61, -0.44), berries -1.11 lb (95% CI -1.45, -0.78), and apples/pears -1.24 lb (95% CI -1.62, -0.86). Increased intake of several vegetables was also inversely associated with weight change: total vegetables -0.25 lb per daily serving (95% CI -0.35, -0.14), tofu/soy -2.47 lb (95% CI, -3.09 to -1.85 lb) and cauliflower -1.37 lb (95% CI -2.27, -0.47). On the other hand, increased intake of starchy vegetables, including corn, peas, and potatoes, was associated with weight gain. Vegetables having both higher fiber and lower glycemic load were more strongly inversely associated with weight change compared with lower-fiber, higher-glycemic-load vegetables (p fruits and non-starchy vegetables is inversely associated with weight change, with important differences by type suggesting that other characteristics of these foods influence the magnitude of their association with weight change.

  8. Dry imaging cameras

    Directory of Open Access Journals (Sweden)

    I K Indrajit

    2011-01-01

    Full Text Available Dry imaging cameras are important hard copy devices in radiology. Using dry imaging camera, multiformat images of digital modalities in radiology are created from a sealed unit of unexposed films. The functioning of a modern dry camera, involves a blend of concurrent processes, in areas of diverse sciences like computers, mechanics, thermal, optics, electricity and radiography. Broadly, hard copy devices are classified as laser and non laser based technology. When compared with the working knowledge and technical awareness of different modalities in radiology, the understanding of a dry imaging camera is often superficial and neglected. To fill this void, this article outlines the key features of a modern dry camera and its important issues that impact radiology workflow.

  9. Area- and Depth-Weighted Averages of Selected SSURGO Variables for the Conterminous United States and District of Columbia

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital data release consists of seven national data files of area- and depth-weighted averages of select soil attributes for every available county in the...

  10. Evaluación del peso seco y el agua corporal según bioimpedancia vectorial frente al método tradicional Assessing dry weight and body water using bioimpedance vector analysis compared to the traditional method

    Directory of Open Access Journals (Sweden)

    María Teresa Centellas Tristán

    2013-03-01

    , los resultados mostraron variaciones poco significativas de los parámetros estudiados. Conclusiones: Aunque la bioimpedancia aporta conocimientos más exactos sobre la composición hídrica corporal y la distribución del agua, el peso seco establecido por estimación clínica sigue siendo de gran valor. La bioimpedancia ayuda a detectar pequeños cambios subclínicos, que podrían tener trascendencia a más largo plazo. La bioimpedancia pone de manifiesto de forma objetiva la desnutrición presente en casi la mitad de pacientes de hemodiálisis.Introduction: Electrical bioimpedance can be used to establish the hydration and nutritional state in haemodialysis. Assessing the hydration status of patients is habitually done as a "clinical art" using the concept of "dry weight". There are few studies that examine the concordance between dry weight estimated clinically and the dry weight deduced post-bioimpedance analysis. Material and methods: 36 patients were studied (26 men and 10 women. Electrical bioimpedance vector analysis was performed before and 30' after midweek dialysis, measuring weight, total water and its distribution, phase angle, Na/K ratio, and the position of each patient's vector in the sphere normogram: percentiles 50.75 and 95. Dry weight was estimated according to the subjective assessment of the nephrologist, nurse and patient. Furthermore, in 12 stable patients the bioimpedance analysis continued for 4 weeks. Results: The age was 69.6±12.5 (r=29-89. Weight was 73.1±14.1 predialysis, and 70.4±13.6 postdialysis. Total body water was 24.7±2.8 L/m (53.7±8.2% of weight; 22.1±3.0 L (56.2±5.9% of weight corresponded to extracellular water and 17.4±3.8 L/m to intracellular water. Following haemodialysis, total water fell to 22.8±2.4 L/m (51.8±8.6% of weight (23.5±2.2 L in men; and 21.5±3 L in women of which 19.6±2.5 L (54.3±5.8% of weight corresponded to extracellular water and 16.7±3.3 to intracellular water. One man and 5 women exceeded

  11. Parental weight perceptions: a cause for concern in the prevention and management of childhood obesity in the United Arab Emirates.

    Directory of Open Access Journals (Sweden)

    Abdulla Aljunaibi

    Full Text Available Parental participation is a key factor in the prevention and management of childhood obesity, thus parental recognition of weight problems is essential. We estimated parental perceptions and their determinants in the Emirati population. We invited 1541 students (grade 1-12; 50% boys and their parents, but only 1440 (6-19 years and their parents consented. Of these, 945 Emirati nationals provided data for analysis. Anthropometric and demographic variables were measured by standard methods. CDC BMI percentile charts for age and sex were used to classify children's weight. Parental perception of their children's weight status (underweight, normal, and overweight/obese was recorded. Logistic regression analyses were used to identify independent predictors of parental perceptions of children's weight status. Of all parents, 33.8% misclassified their children's' weight status; underestimating (27.4% or overestimating (6.3%. Misclassification was highest among parents of overweight/obese children (63.5% and underweight (55.1% children. More importantly, parental perceptions of their children being overweight or obese, among truly overweight/obese children, i.e. correct identification of an overweight/obese child as such, were associated with the true child's BMI percentile (CDC with an OR of 1.313 (95% CI: 1.209-1.425; p<0.001 per percentile point, but not age, parental education, household income, and child's sex. We conclude that the majority of parents of overweight/obese children either overestimated or, more commonly, underestimated children's weight status. Predictors of accurate parental perception, in this population, include the true children's BMI, but not age, household income, and sex. Thus, parents having an incorrect perception of their child's weight status may ignore otherwise appropriate health messages.

  12. Effect of dry and cold environment on the weight and diet of COPD rats%寒燥对慢性阻塞性肺疾病模型大鼠体质量及饮食量的影响

    Institute of Scientific and Technical Information of China (English)

    高振; 李风森; 荆晶; 徐丹; 哈木拉提·吾甫尔

    2012-01-01

    目的:揭示寒燥对慢性阻塞性肺疾病(COPD)模型大鼠体质量及饮食量的影响,为西北特点COPD防治措施的制定提供参考.方法:利用气管滴注弹性蛋白酶结合熏烟建立COPD模型大鼠36只,在此基础上复合寒燥应激建立COPD寒燥模型18只,并设立对照组13只,每只大鼠的体质量和每组大鼠饮食量结果用SPSS 11.5分析.结果:COPD组及COPD寒燥组体质量指数(BMI)和Lee's指数均小于对照组(P<0.01),且COPD寒燥组此3项指标均小于COPD组(P<0.05,P<0.01).COPD寒燥组每10g体质量每天进食量大于对照组和COPD组.结论:寒燥可以加剧并提前COPD模型体质量减轻和营养不良的症状,并增加进食量,但此状态非仅靠增加一般饮食可以改善.%Objective: To reveal the effect of cold and dry environment on weight and diet of the COPD model, so as to provide reference for treating COPD with local peculiarity of the northwest of China. Methods: COPD model was established by dripping porcine pancreatic elastase (PEE) in trachea combination with cigarette smoking, and model of cold dryness syndrome in northwest China of COPD was also set up by dripping PEE in trachea in combination with cigarette smoking for cold-dry environmental stress. SPSS11.5 were used to analysis rat's weight and diet. Results: the weight of COPD cold and dryness group was less than the COPD group, less than the control group; for Lee's index, and BMI COPD cold and dryness group was more than the COPD group, more than the control group. Conclusion: Cold and dryness can ahead of the weight loss and malnutrition and increase food intake, but this state can't be improved only by increasing the general diet.

  13. Influence of nursing intervention on dry weight of maintenance hemodialysis patients%护理干预对维持性血液透析患者干体重的影响

    Institute of Scientific and Technical Information of China (English)

    饶龙华

    2016-01-01

    目的:探究对维持性血液透析患者实施优质护理干预措施之后,其干体重所受影响。方法:收治血液透析患者116例,随机平分为两组。常规组实施常规护理,优质组采用优质护理干预措施。结果:优质组护理效果明显比常规组好,两组差异具有统计学意义(P<0.05)。结论:对维持性血液透析患者实施优质护理干预措施可帮助获取较好效果,控制患者的干体重,保障生命安全。%Objective:To explore the impact on the dry weight of maintenance hemodialysis patients after high quality nursing intervention.Methods:116 maintenance hemodialysis patients were selected.They were randomly divided into the two groups. Patiens in the conventional group received routine nursing care,while patients in the high quality group treated by high quality nursing intervention measures.Results:The nursing effect of the high quality group was better than that of the conventional group,and the difference between groups was statistically signiifcant(P<0.05).Conclusion:High quality nursing interventions can help to get better results in maintenance hemodialysis patients,control the dry weight of the patients,and ensure the safety of life.

  14. Corrective Action Decision Document/ Closure Report for Corrective Action Unit 556: Dry Wells and Surface Release Points, Nevada Test Site, Nevada with Errata Sheet, Revision 0

    Energy Technology Data Exchange (ETDEWEB)

    Grant Evenson

    2008-09-01

    This Corrective Action Decision Document (CADD)/Closure Report (CR) has been prepared for Corrective Action Unit 556, Dry Wells and Surface Release Points, located at the Nevada Test Site, Nevada, in accordance with the Federal Facility Agreement and Consent Order (FFACO, 1996; as amended February 2008). Corrective Action Unit (CAU) 556 is comprised of four corrective action sites (CASs): • 06-20-04, National Cementers Dry Well • 06-99-09, Birdwell Test Hole • 25-60-03, E-MAD Stormwater Discharge and Piping • 25-64-01, Vehicle Washdown and Drainage Pit The purpose of this CADD/CR is to provide justification and documentation supporting the recommendation for closure of CAU 556 with no further corrective action. To achieve this, corrective action investigation (CAI) activities began on February 7 and were completed on June 19, 2008, as set forth in the Corrective Action Investigation Plan for Corrective Action Unit 556: Dry Wells and Surface Release Points, Nevada Test Site, Nevada (NNSA/NSO, 2007). The purpose of the CAI was to fulfill the following data needs as defined during the data quality objective (DQO) process: • Determine whether contaminants of concern (COCs) are present. • If COCs are present, determine their nature and extent. • Provide sufficient information and data to complete appropriate corrective actions. The CAU 556 data were evaluated based on the data quality assessment process, which demonstrated the quality and acceptability of the data for use in fulfilling the DQO data needs. Analytes detected during the CAI were evaluated against appropriate final action levels (FALs) to identify the COCs for each CAS. The results of the CAI identified COCs at one of the four CASs in CAU 556 that required the completion of a corrective action. Assessment of the data generated from investigation activities conducted at CAU 556 revealed the following: • Corrective Action Sites 06-20-04, 06-99-09, and 25-64-01 do not contain contamination at

  15. Innovative retail merchandising strategies to accommodate for the growing trend of heavier carcass weights in the United States.

    Science.gov (United States)

    West, S E; Nicholson, K L; Nicholson, J D W; Griffin, D B; Lawrence, T E; Wasser, B E; Savell, J W

    2011-08-01

    Three subprimals from beef carcasses, Average (mean=340.6kg) and Heavy weight (mean=461.6kg), were cut using Innovative versus Conventional cutting styles. Longer (Pmerchandise heavyweight beef must account for the decreased primary saleable yields and increased labor requirements through increased retail pricing. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Dry Etching

    DEFF Research Database (Denmark)

    Stamate, Eugen; Yeom, Geun Young

    2016-01-01

    Production of large-area flat panel displays (FPDs) involves several pattern transfer and device fabrication steps that can be performed with dry etching technologies. Even though the dry etching using capacitively coupled plasma is generally used to maintain high etch uniformity, due to the need...... for the higher processing rates in FPDs, high-density plasma processing tools that can handle larger-area substrate uniformly are more intensively studied especially for the dry etching of polysilicon thin films. In the case of FPD processing, the current substrate size ranges from 730 × 920 mm (fourth...... generation) to 2,200 × 2,500 mm (eighth generation), and the substrate size is expected to increase further within a few years. This chapter aims to present relevant details on dry etching including the phenomenology, materials to be etched with the different recipes, plasma sources fulfilling the dry...

  17. A compact and low-weight sputtering unit for in situ investigations of thin film growth at synchrotron radiation beamlines.

    Science.gov (United States)

    Walter, P; Dippel, A-C; Pflaum, K; Wernecke, J; van den Hurk, J; Blume, J; Klemradt, U

    2015-05-01

    In this work, we report on a highly variable, compact, and light high-vacuum sputter deposition unit designed for in situ experiments using synchrotron radiation facilities. The chamber can be mounted at various synchrotron beamlines for scattering experiments in grazing incidence geometry. The sample position and the large exit window allow to perform x-ray experiments up to large q values. The sputtering unit is easy to mount on existing experimental setups and can be remote-controlled. In this paper, we describe in detail the design and the performance of the new sputtering chamber and present the installation of the apparatus at different 3rd generation light sources. Furthermore, we describe the different measurement options and present some selected results. The unit has been successfully commissioned and is now available for users at PETRA III at DESY.

  18. Weighted composition operators from F(p, q, s) spaces to Bers-type spaces in the unit ball

    Institute of Scientific and Technical Information of China (English)

    L(U) Xiao-fen

    2009-01-01

    This paper deals with the boundedness and compactness of the weighted compo-sition operators from the F(p, q, s) spaces, including Hardy space, Bergman space, Q~p space,BMOA space, Besov space and α-Bloch space, to Bers-type spaces H_ν~∞( or little Bets-type spaces H_(ν,0)~∞ ), where ν is normal.

  19. Changes in Intake of Fruits and Vegetables and Weight Change in United States Men and Women Followed for Up to 24 Years: Analysis from Three Prospective Cohort Studies.

    Directory of Open Access Journals (Sweden)

    Monica L Bertoia

    2015-09-01

    Full Text Available Current dietary guidelines recommend eating a variety of fruits and vegetables. However, based on nutrient composition, some particular fruits and vegetables may be more or less beneficial for maintaining or achieving a healthy weight. We hypothesized that greater consumption of fruits and vegetables with a higher fiber content or lower glycemic load would be more strongly associated with a healthy weight.We examined the association between change in intake of specific fruits and vegetables and change in weight in three large, prospective cohorts of 133,468 United States men and women. From 1986 to 2010, these associations were examined within multiple 4-y time intervals, adjusting for simultaneous changes in other lifestyle factors, including other aspects of diet, smoking status, and physical activity. Results were combined using a random effects meta-analysis. Increased intake of fruits was inversely associated with 4-y weight change: total fruits -0.53 lb per daily serving (95% CI -0.61, -0.44, berries -1.11 lb (95% CI -1.45, -0.78, and apples/pears -1.24 lb (95% CI -1.62, -0.86. Increased intake of several vegetables was also inversely associated with weight change: total vegetables -0.25 lb per daily serving (95% CI -0.35, -0.14, tofu/soy -2.47 lb (95% CI, -3.09 to -1.85 lb and cauliflower -1.37 lb (95% CI -2.27, -0.47. On the other hand, increased intake of starchy vegetables, including corn, peas, and potatoes, was associated with weight gain. Vegetables having both higher fiber and lower glycemic load were more strongly inversely associated with weight change compared with lower-fiber, higher-glycemic-load vegetables (p < 0.0001. Despite the measurement of key confounders in our analyses, the potential for residual confounding cannot be ruled out, and although our food frequency questionnaire specified portion size, the assessment of diet using any method will have measurement error.Increased consumption of fruits and non

  20. Food Insecurity: Its Relationship to Dietary Intake and Body Weight among Somali Refugee Women in the United States

    Science.gov (United States)

    Dharod, Jigna M.; Croom, Jamar E.; Sady, Christine G.

    2013-01-01

    Objective: To examine the association between food insecurity, dietary intake, and body mass index among Somali refugee women living in the United States. Methods: Cross-sectional study utilizing the snowball sampling method. Results: Most (67%) participants experienced some level of food insecurity, which was common among recent arrivals and…

  1. Application of alcohol-amine method dry gas desulfurization technology in catalytic cracking unit%醇胺法干气脱硫工艺在催化裂化装置上的应用

    Institute of Scientific and Technical Information of China (English)

    马俊

    2016-01-01

    The 1.0 Mt/a catalytic cracking unit of an oil refinery uses alcohol-amine method dry gas desulfurization technology. Test run result showed that this process is simple and stable in operation;because of the dry gas knockout drum installed in front of dry gas desulfurization tower,the problem of dry gas carrying liquid is eliminated;the problem of dry gas carrying ammonia liquid is avoided;the hydrogen sulfide content is decreased from 6 071mg/m3 to 16 mg/m3.%某炼油厂1.0 Mt/a重油催化裂化装置采用醇胺法干气脱硫工艺。标定结果表明,该工艺操作简单,运行平稳。由于干气脱硫塔前设有干气分液罐,消除了原稳定装置干气带液的问题;杜绝了干气携带胺液的问题;工艺脱硫效果显著,净化后的干气中硫化氢含量由原来的6071 mg/m3降低到16 mg/m3。

  2. NOAA Point Shapefile - 100m2 Fish Density for Dry Tortugas, United States, Project NF-08-06-SACS, 2008, WGS84

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The research mission was conducted in the Dry Tortugas, FL by National Ocean Service scientists from the Center for Coastal Habitat and Fisheries Research (CCFHR)...

  3. Hepatotoxicity associated with weight loss or sports dietary supplements, including OxyELITE Pro™ - United States, 2013.

    Science.gov (United States)

    Chatham-Stephens, Kevin; Taylor, Ethel; Chang, Arthur; Peterson, Amy; Daniel, Johnni; Martin, Colleen; Deuster, Patricia; Noe, Rebecca; Kieszak, Stephanie; Schier, Josh; Klontz, Karl; Lewis, Lauren

    2017-01-01

    In September 2013, the Hawaii Department of Health (HDOH) was notified of seven adults who developed acute hepatitis after taking OxyELITE Pro™, a weight loss and sports dietary supplement. CDC assisted HDOH with their investigation, then conducted case-finding outside of Hawaii with FDA and the Department of Defense (DoD). We defined cases as acute hepatitis of unknown etiology that occurred from April 1, 2013, through December 5, 2013, following exposure to a weight loss or muscle-building dietary supplement, such as OxyELITE Pro™. We conducted case-finding through multiple sources, including data from poison centers (National Poison Data System [NPDS]) and FDA MedWatch. We identified 40 case-patients in 23 states and two military bases with acute hepatitis of unknown etiology and exposure to a weight loss or muscle building dietary supplement. Of 35 case-patients who reported their race, 15 (42.9%) reported white and 9 (25.7%) reported Asian. Commonly reported symptoms included jaundice, fatigue, and dark urine. Twenty-five (62.5%) case-patients reported taking OxyELITE Pro™. Of these 25 patients, 17 of 22 (77.3%) with available data were hospitalized and 1 received a liver transplant. NPDS and FDA MedWatch each captured seven (17.5%) case-patients. Improving the ability to search surveillance systems like NPDS and FDA MedWatch for individual and grouped dietary supplements, as well as coordinating case-finding with DoD, may benefit ongoing surveillance efforts and future outbreak responses involving adverse health effects from dietary supplements. This investigation highlights opportunities and challenges in using multiple sources to identify cases of suspected supplement associated adverse events. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

  4. Remote search for gamma sources at the dry storage unit 3A in Andreeva bay and the determination of their dose rates during activities for improvement to the radiological environment

    OpenAIRE

    Ivanov Kirill E.; Varnavin Anatoly P.; Korolev Andrey V.; Stepennov Boris S.; Sukhoruchkin Andrey K.; Teterin Yury A.; Teterin Anton Yu.; Kharitonov Vladimir V.; Selishev Valery A.; Fedoseenkov Alexander N.; Krasnoshekov Alexander N.; Kosnikov Alexander S.; Kostikov Dmitry A.

    2012-01-01

    The remotely controlled replacement of the concrete covering of the spent fuel dry storage unit 3A with a new iron horizontal biological shielding was carried out during works aimed at the improvement of the radiological environment at the NWC “SevRAO” - Branch of FSUE “RosRAO”, Andreeva Bay, Murmansk Region. Video control systems, a BROKK robotic manipulator, HIAB manipulator crane, gamma detectors of the ASCRO radiation monitoring system, and a CARTOGAM gamma camera were employed. A C...

  5. Increase in 4-coumaryl alcohol units during lignification in alfalfa (Medicago sativa) alters the extractability and molecular weight of lignin.

    Science.gov (United States)

    Ziebell, Angela; Gracom, Kristen; Katahira, Rui; Chen, Fang; Pu, Yunqiao; Ragauskas, Art; Dixon, Richard A; Davis, Mark

    2010-12-10

    The lignin content of biomass can impact the ease and cost of biomass processing. Lignin reduction through breeding and genetic modification therefore has potential to reduce costs in biomass-processing industries (e.g. pulp and paper, forage, and lignocellulosic ethanol). We investigated compositional changes in two low-lignin alfalfa (Medicago sativa) lines with antisense down-regulation of p-coumarate 3-hydroxylase (C3H) or hydroxycinnamoyl-CoA:shikimate hydroxycinnamoyltransferase (HCT). We investigated whether the difference in reactivity during lignification of 4-coumaryl alcohol (H) monomers versus the naturally dominant sinapyl alcohol and coniferyl alcohol lignin monomers alters the lignin structure. Sequential base extraction readily reduced the H monomer content of the transgenic lines, leaving a residual lignin greatly enriched in H subunits; the extraction profile highlighted the difference between the control and transgenic lines. Gel permeation chromatography of isolated ball-milled lignin indicated significant changes in the weight average molecular weight distribution of the control versus transgenic lines (CTR1a, 6000; C3H4a, 5500; C3H9a, 4000; and HCT30a, 4000).

  6. Increase in 4-Coumaryl Alcohol Units during Lignification in Alfalfa (Medicago sativa) Alters the Extractability and Molecular Weight of Lignin*

    Science.gov (United States)

    Ziebell, Angela; Gracom, Kristen; Katahira, Rui; Chen, Fang; Pu, Yunqiao; Ragauskas, Art; Dixon, Richard A.; Davis, Mark

    2010-01-01

    The lignin content of biomass can impact the ease and cost of biomass processing. Lignin reduction through breeding and genetic modification therefore has potential to reduce costs in biomass-processing industries (e.g. pulp and paper, forage, and lignocellulosic ethanol). We investigated compositional changes in two low-lignin alfalfa (Medicago sativa) lines with antisense down-regulation of p-coumarate 3-hydroxylase (C3H) or hydroxycinnamoyl-CoA:shikimate hydroxycinnamoyltransferase (HCT). We investigated whether the difference in reactivity during lignification of 4-coumaryl alcohol (H) monomers versus the naturally dominant sinapyl alcohol and coniferyl alcohol lignin monomers alters the lignin structure. Sequential base extraction readily reduced the H monomer content of the transgenic lines, leaving a residual lignin greatly enriched in H subunits; the extraction profile highlighted the difference between the control and transgenic lines. Gel permeation chromatography of isolated ball-milled lignin indicated significant changes in the weight average molecular weight distribution of the control versus transgenic lines (CTR1a, 6000; C3H4a, 5500; C3H9a, 4000; and HCT30a, 4000). PMID:20921228

  7. Remote search for gamma sources at the dry storage unit 3A in Andreeva bay and the determination of their dose rates during activities for improvement to the radiological environment

    Directory of Open Access Journals (Sweden)

    Ivanov Kirill E.

    2012-01-01

    Full Text Available The remotely controlled replacement of the concrete covering of the spent fuel dry storage unit 3A with a new iron horizontal biological shielding was carried out during works aimed at the improvement of the radiological environment at the NWC “SevRAO” - Branch of FSUE “RosRAO”, Andreeva Bay, Murmansk Region. Video control systems, a BROKK robotic manipulator, HIAB manipulator crane, gamma detectors of the ASCRO radiation monitoring system, and a CARTOGAM gamma camera were employed. A CARTOGAM gamma camera was used in all stages of the work involving high radiation levels for the remote location of the most dangerous gamma radiation sources and the evaluation of their dose rates. Gamma detectors of the ASCRO radiation monitoring system were located at several spots of the dry storage unit 3A in order to control the radiation situation. The use of the ASCRO and CARTOGAM has allowed us to avoid unauthorized exposure of the staff involved in the operations at the dry storage unit 3A site.

  8. Clinical significance of body composition monitor in evaluating the dry weight of hemodialysis patients%人体成分监测仪在血液透析患者干体重评估中的意义

    Institute of Scientific and Technical Information of China (English)

    黄红; 那宇; 韦加美; 李爽; 高月花; 高建军; 孙清海

    2013-01-01

    Objective To study the clinical significance of the body composition monitor (BCM) in evaluating the dry weight of hemodialysis patients. Methods One hundred and twenty six hemodialysis patients were selected as the case group. 40 healthy volunteers were used as the control group. These two groups were analyzed by the BCM, respectively. The amount of the total body water (TBW), extracellular water (ECW), intracellular water (ICW), over hydration (OH) were measured and recorded. The blood pressure of hemodialysis patients and control group was measured before the BCM analyses. ROC curve was used to analyze the OH value for assessing the accuracy of dry weight, while the factors to affect the OH value were analyzed by Logistic regression. Results (1)OH value was positively correlated with the amount of dehydration (r=0.462, P<0.001). (2) The area under the ROC curve was 0.877, when the cut-off point was at 3.30 L, the sensitivity of evaluation was 0.909, while the specificity of evaluation was 0.833. 3) Logistic regression analyses showed that ECW and SBP were the key factor to affect the OH value (P<0.05), where the ECW contributed more than that of SBP. Conclusion BCM can objectively monitor the amount of extra water in hemodialysis patients, and play an important role in evaluating the dry weight.%目的:研究人体成分监测仪(BCM)在血液透析患者干体重评估中的意义。方法选择126例在我院血液透析中心透析的患者作为病例组,选择40例在我院体检中心体检健康的志愿者作为对照组,两组分别行BCM监测。记录测得的总体液量(TBW)、细胞外液(ECW)、细胞内液(ICW)、水负荷(OH),记录患者透析脱水量、上机前血压以及对照组血压。利用ROC曲线分析OH值评估干体重的准确性,Logistic回归分析影响OH值的因素。结果(1)OH值与脱水量呈正相关(r=0.462,P<0.001)。(2)OH值评估干体

  9. Use of genotype × environment interaction model to accommodate genetic heterogeneity for residual feed intake, dry matter intake, net energy in milk, and metabolic body weight in dairy cattle.

    Science.gov (United States)

    Yao, C; de Los Campos, G; VandeHaar, M J; Spurlock, D M; Armentano, L E; Coffey, M; de Haas, Y; Veerkamp, R F; Staples, C R; Connor, E E; Wang, Z; Hanigan, M D; Tempelman, R J; Weigel, K A

    2017-03-01

    Feed efficiency in dairy cattle has gained much attention recently. Due to the cost-prohibitive measurement of individual feed intakes, combining data from multiple countries is often necessary to ensure an adequate reference population. It may then be essential to model genetic heterogeneity when making inferences about feed efficiency or selecting efficient cattle using genomic information. In this study, we constructed a marker × environment interaction model that decomposed marker effects into main effects and interaction components that were specific to each environment. We compared environment-specific variance component estimates and prediction accuracies from the interaction model analyses, an across-environment analyses ignoring population stratification, and a within-environment analyses using an international feed efficiency data set. Phenotypes included residual feed intake, dry matter intake, net energy in milk, and metabolic body weight from 3,656 cows measured in 3 broadly defined environments: North America (NAM), the Netherlands (NLD), and Scotland (SAC). Genotypic data included 57,574 single nucleotide polymorphisms per animal. The interaction model gave the highest prediction accuracy for metabolic body weight, which had the largest estimated heritabilities ranging from 0.37 to 0.55. The within-environment model performed the best when predicting residual feed intake, which had the lowest estimated heritabilities ranging from 0.13 to 0.41. For traits (dry matter intake and net energy in milk) with intermediate estimated heritabilities (0.21 to 0.50 and 0.17 to 0.53, respectively), performance of the 3 models was comparable. Genomic correlations between environments also were computed using variance component estimates from the interaction model. Averaged across all traits, genomic correlations were highest between NAM and NLD, and lowest between NAM and SAC. In conclusion, the interaction model provided a novel way to evaluate traits measured in

  10. century drying

    Science.gov (United States)

    Cook, Benjamin I.; Smerdon, Jason E.; Seager, Richard; Coats, Sloan

    2014-11-01

    Global warming is expected to increase the frequency and intensity of droughts in the twenty-first century, but the relative contributions from changes in moisture supply (precipitation) versus evaporative demand (potential evapotranspiration; PET) have not been comprehensively assessed. Using output from a suite of general circulation model (GCM) simulations from phase 5 of the Coupled Model Intercomparison Project, projected twenty-first century drying and wetting trends are investigated using two offline indices of surface moisture balance: the Palmer Drought Severity Index (PDSI) and the Standardized Precipitation Evapotranspiration Index (SPEI). PDSI and SPEI projections using precipitation and Penman-Monteith based PET changes from the GCMs generally agree, showing robust cross-model drying in western North America, Central America, the Mediterranean, southern Africa, and the Amazon and robust wetting occurring in the Northern Hemisphere high latitudes and east Africa (PDSI only). The SPEI is more sensitive to PET changes than the PDSI, especially in arid regions such as the Sahara and Middle East. Regional drying and wetting patterns largely mirror the spatially heterogeneous response of precipitation in the models, although drying in the PDSI and SPEI calculations extends beyond the regions of reduced precipitation. This expansion of drying areas is attributed to globally widespread increases in PET, caused by increases in surface net radiation and the vapor pressure deficit. Increased PET not only intensifies drying in areas where precipitation is already reduced, it also drives areas into drought that would otherwise experience little drying or even wetting from precipitation trends alone. This PET amplification effect is largest in the Northern Hemisphere mid-latitudes, and is especially pronounced in western North America, Europe, and southeast China. Compared to PDSI projections using precipitation changes only, the projections incorporating both

  11. Adjustment of measurements with multiplicative errors: error analysis, estimates of the variance of unit weight, and effect on volume estimation from LiDAR-type digital elevation models.

    Science.gov (United States)

    Shi, Yun; Xu, Peiliang; Peng, Junhuan; Shi, Chuang; Liu, Jingnan

    2014-01-10

    Modern observation technology has verified that measurement errors can be proportional to the true values of measurements such as GPS, VLBI baselines and LiDAR. Observational models of this type are called multiplicative error models. This paper is to extend the work of Xu and Shimada published in 2000 on multiplicative error models to analytical error analysis of quantities of practical interest and estimates of the variance of unit weight. We analytically derive the variance-covariance matrices of the three least squares (LS) adjustments, the adjusted measurements and the corrections of measurements in multiplicative error models. For quality evaluation, we construct five estimators for the variance of unit weight in association of the three LS adjustment methods. Although LiDAR measurements are contaminated with multiplicative random errors, LiDAR-based digital elevation models (DEM) have been constructed as if they were of additive random errors. We will simulate a model landslide, which is assumed to be surveyed with LiDAR, and investigate the effect of LiDAR-type multiplicative error measurements on DEM construction and its effect on the estimate of landslide mass volume from the constructed DEM.

  12. [Hypoacusis-deafness related to perinatal adverse conditions. According to the register available in a specialized unit of Ciudad de Mexico. Analysis according to birth weight].

    Science.gov (United States)

    Peñazola-López, Y R; Castillo-Maya, G; García-Pedroza, F; Sánchez-López, H

    2004-01-01

    To analyse perinatal adverse conditions related with birth weight in 160 children with hearing impairment-deafness (prelingual sensorineural hearing loss) according to medical data of a specialized medical unit in Mexico City. The average age of children was 4 years old +/- 1.7; 61% were male. 47.5% of the cases had a birthweight between 1,500 and 2,900 g. 90 cases (56%) had an abnormal delivery and 68 (42.5%) were first pregnancy cases. A high number of cases had delayed breathing, cyanosis, jaundice or respiratory failure. 104 cases (65%) had deafness and 56 (35%) presented. hearing loss. Only 11% of the children had a birth-weight under 1,500 g. 58% of all cases had a birth weight lower than 3,000 g. The quality of medical assistance provided during the perinatal period has a very important role in origin of hearing impairment--deafness in this group of children. It is important to increase our knowledge about the perinatal adverse conditions in order to establish preventive programs.

  13. Dry cell battery poisoning

    Science.gov (United States)

    Batteries - dry cell ... Acidic dry cell batteries contain: Manganese dioxide Ammonium chloride Alkaline dry cell batteries contain: Sodium hydroxide Potassium hydroxide Lithium dioxide dry cell batteries ...

  14. Outbreak of Salmonella enterica serotype Infantis infection in humans linked to dry dog food in the United States and Canada, 2012.

    Science.gov (United States)

    Imanishi, Maho; Rotstein, David S; Reimschuessel, Renate; Schwensohn, Colin A; Woody, Dillard H; Davis, Samuel W; Hunt, April D; Arends, Katherine D; Achen, Maya; Cui, Jing; Zhang, Yan; Denny, Lynn F; Phan, Quyen N; Joseph, Lavin A; Tuite, Carla C; Tataryn, Joanne R; Behravesh, Casey Barton

    2014-03-01

    CASE DESCRIPTION--In April 2012, Salmonella enterica serotype Infantis was detected in an unopened bag of dry dog food collected during routine retail surveillance. PulseNet, a national bacterial subtyping network, identified humans with Salmonella Infantis infection with the same genetic fingerprint as the dog food sample. CLINICAL FINDINGS--An outbreak investigation identified 53 ill humans infected with the outbreak strain during January 1 to July 5, 2012, in 21 states and 2 provinces in Canada; 20 (38%) were children ≤ 2 years old, and 12 of 37 (32%) were hospitalized. Of 21 ill people who remembered the dog food brand, 12 (57%) reported a brand produced at a plant in Gaston, SC. Traceback investigations also identified that plant. The outbreak strain was isolated from bags of dry dog food and fecal specimens obtained from dogs that lived with ill people and that ate the implicated dry dog food. TREATMENT AND OUTCOME--The plant was closed temporarily for cleaning and disinfection. Sixteen brands involving > 27,000 metric tons (> 30,000 tons) of dry dog and cat food were recalled. Thirty-one ill dogs linked to recalled products were reported through the FDA consumer complaint system. CLINICAL RELEVANCE-- A one-health collaborative effort on epidemiological, laboratory, and traceback investigations linked dry dog foods produced at a plant to illnesses in dogs and humans. More efforts are needed to increase awareness among pet owners, health-care professionals, and the pet food industry on the risk of illness in pets and their owners associated with dry pet foods and treats.

  15. DETERMINATION OF A MATHEMATICAL MODEL TO ESTIMATE THE AREA AND DRY WEIGHT OF THE LEAF LIMBO OF Prunus persica CV. Jarillo DETERMINACIÓN DE UN MODELO MATEMÁTICO PARA LA ESTIMACIÓN DEL ÁREA FOLIAR Y PESO SECO DEL LIMBO DE Prunus persica CV. Jarillo

    Directory of Open Access Journals (Sweden)

    Enrique Quevedo García

    2012-06-01

    Full Text Available Abstract. A study was conducted to determine the variables that estimated the leaf limbo area and the leaf limbo dry weight of peach Prunus persica (L. Batsch cv. Jarillo. Fifty leaves, aged 2.5 months, were selected and measured: leaf limbo length and width, petiole length, leaf length, petiole diameter, leaf limbo fresh weight, petiole fresh weight, leaf fresh weight, leaf limbo dry weight, petiole dry weight, leaf dry weight, length/width limbo, petiole length/limbo length and leaf limbo area. The results allowed to obtain regression equations for estimating the leaf area and the limbo dry weight. Using the lineal models LA = b1 + b2 (LLL x LLW and LA= b1+ b2LLL + b3LLW a leaf area equation was determined. Alternative models to calculate limbo dry weight were evaluated LLDW = -b1+ b2 LLFW and LLDW= - b1 + b2LLL + b3PL. The best equations found with an R2 of 0.99 were LA = 1.572 + 0.65169(LLL x LLW, LA=-23.106+2.8064LLW + 3.6761LLL and LLDW = -0.002+0.401(LLFW.Resumen. Se realizó un estudio para determinar las variables que estimaran el área del limbo foliar y el peso seco del limbo de durazno Prunus persica (L. Batsch cv. Jarillo. Se seleccionaron cincuenta hojas con 2,5 meses de edad, fueron medidos: ancho del limbo, longitud del limbo, longitud del peciolo, longitud hoja, diámetro peciolo, peso fresco del limbo, peso fresco del peciolo, peso fresco de la hoja, peso seco del limbo, peso seco peciolo, peso seco de la hoja, longitud /ancho limbo, longitud del peciolo/longitud del limbo, área foliar del limbo. Los resultados alcanzados permitieron obtener ecuaciones de regresión para estimar el área foliar del limbo y el peso seco del limbo. Se halló una ecuación para la determinación del área foliar del limbo con los modelos lineales LA = b1 + b2 (LLL x LLW y LA= b1 + b2LLL + b3LLW. También se evaluaron modelos alternativas para calcular el peso seco del limbo, LLDW = -b1+ b2LLFW y LLDW= - b1 + b2LLL + b3PL. Las mejores ecuaciones

  16. Short communication: Use of single nucleotide polymorphism genotypes and health history to predict future phenotypes for milk production, dry matter intake, body weight, and residual feed intake in dairy cattle.

    Science.gov (United States)

    Yao, C; Armentano, L E; VandeHaar, M J; Weigel, K A

    2015-03-01

    As feed prices have increased, the efficiency of feed utilization in dairy cattle has attracted increasing attention. In this study, we used residual feed intake (RFI) as a measurement of feed efficiency along with its component traits, adjusted milk energy (aMilkE), adjusted dry matter intake (aDMI), and adjusted metabolic body weight (aMBW), where the adjustment was for environmental factors. These traits may also be affected by prior health problems. Therefore, the carryover effects of 3 health traits from the rearing period and 10 health traits from the lactating period (in the same lactation before phenotype measurements) on RFI, aMilkE, aDMI, and aMBW were evaluated. Cows with heavier birth weight and greater body weight at calving of this lactation had significant increases in aMilkE, aDMI, and aMBW. The only trait associated with RFI was the incidence of diarrhea early in the lactation. Mastitis and reproductive problems had negative carryover effects on aMilkE. The aMBW of cows with metabolic disorders early in the lactation was lower than that of unaffected cows. The incidence of respiratory disease during lactating period was associated with greater aMBW and higher aDMI. To examine the contribution of health traits to the accuracy of predicted phenotype, genomic predictions were computed with or without information regarding 13 health trait phenotypes using random forests (RF) and support vector machine algorithms. Adding health trait phenotypes increased prediction accuracies slightly, except for prediction of RFI using RF. In general, the accuracies were greater for support vector machine than RF, especially for RFI. The methods described herein can be used to predict future phenotypes for dairy replacement heifers, thereby facilitating culling decisions that can lead to decreased feed costs during the rearing period. For these decisions, prediction of the animal's own phenotype is of greater importance than prediction of the genetic superiority or

  17. Trigger Point Dry Needling.

    Science.gov (United States)

    2017-03-01

    Increasingly, physical therapists in the United States and throughout the world are using dry needling to treat musculoskeletal pain, even though this treatment has been a controversial addition to practice. To better generalize to physical therapy practice the findings about dry needling thus far, the authors of a study published in the March 2017 issue of JOSPT identified the need for a systematic review examining the effectiveness of dry needling performed by physical therapists on people with musculoskeletal pain. Their review offers a meta-analysis of data from several included studies and assesses the evidence for risks of bias. J Orthop Sports Phys Ther 2017;47(3):150. doi:10.2519/jospt.2017.0502.

  18. Dry Mouth

    Science.gov (United States)

    ... Use a fluoride rinse or brush-on fluoride gel before bedtime. See your dentist at least twice yearly to have your teeth examined and plaque removed, to help prevent tooth decay. Several herbal remedies have been used historically to treat dry ...

  19. Light-Weight Radioisotope Heater Unit final safety analysis report (LWRHU-FSAR): Volume 1: A. Introduction and executive summary: B. Reference Design Document (RDD)

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, E.W.

    1988-10-01

    The orbiter and probe portions of the National Aeronautics and Space Administration (NASA) Galileo spacecraft contain components which require auxiliary heat during the mission. To meet these needs, the Department of Energy's (DOE's) Office of Special Applications (OSA) has sponsored the design, fabrication, and testing of a one-watt encapsulated plutonium dioxide-fueled thermal heater named the Light-Weight Radioisotope Heater Unit (LWRHU). This report, prepared by Monsanto Research Corporation (MRC), addresses the radiological risks which might be encountered by people both at the launch area and worldwide should postulated mission failures or malfunctions occur, resulting in the release of the LWRHUs to the environment. Included are data from the design, mission descriptions, postulated accidents with their consequences, test data, and the derived source terms and personnel exposures for the various events. 11 refs., 44 figs., 11 tabs.

  20. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Causes of Dry Eye Dry Eye Treatment What Is Dry Eye? Written By: Kierstan Boyd Reviewed By: ... your eyes do not produce enough tears, it is called dry eye. Dry eye is also when ...

  1. energetic performance analysis of drying agricultural products ...

    African Journals Online (AJOL)

    user

    1,2,3,4DEPARTMENT OF MECHANICAL ENGINEERING, UNIVERSITY OF ILORIN, P.M.B. 1515, ILORIN, ... drying and moldy food [9]. ... solar drying systems diversely in operation are ... 2.1 Useful Energy Required for Drying A Unit Amount.

  2. Covariate adjusted weighted normal spatial scan statistics with applications to study geographic clustering of obesity and lung cancer mortality in the United States.

    Science.gov (United States)

    Huang, Lan; Tiwari, Ram C; Pickle, Linda W; Zou, Zhaohui

    2010-10-15

    In the field of cluster detection, a weighted normal model-based scan statistic was recently developed to analyze regional continuous data and to evaluate the clustering pattern of pre-defined cells (such as state, county, tract, school, hospital) that include many individuals. The continuous measures of interest are, for example, the survival rate, mortality rate, length of physical activity, or the obesity measure, namely, body mass index, at the cell level with an uncertainty measure for each cell. In this paper, we extend the method to search for clusters of the cells after adjusting for single/multiple categorical/continuous covariates. We apply the proposed method to 1999-2003 obesity data in the United States (US) collected by CDC's Behavioral Risk Factor Surveillance System with adjustment for age and race, and to 1999-2003 lung cancer age-adjusted mortality data by gender in the United States from the Surveillance Epidemiology and End Results (SEER Program) with adjustment for smoking and income.

  3. 应用生物电阻抗预测方程评价维持性血液透析患者干体质量%Assessment of dry weight among maintenance hemodialysis patients with the application of bioelectrical impedance prediction equation

    Institute of Scientific and Technical Information of China (English)

    杜静; 隋小妮; 赵战云; 邹作君

    2012-01-01

    Object To explore the accuracy of bioelectrical impedance prediction equation in the evaluation of dry weight among maintenance hemodialysis (MHD) patients. Methods Dry weight of 60 MHD patients was estimated using electrical impedance value of 50 KHz frequency measured by bioelectrical impedance analyzer, combined with slope method and new 3-compartment model. Dry weight of these participants was the post-dialysis weight, measured by inferior vena cava diameter (IVCD) method which was deemed as golden standard. Another 90 individuals with matched gender, age, height, body weight and BMI were selected to construct coefficient and compare the human body parameters with MHD patient. Results Pearson correlation coefficient between the evaluated dry weight by slope method and true dry weight was 0.991. Bland-Altman plot showed these two approaches bore poor consistency and the difference between them was far from zero. Pearson correlation coefficient between assessed dry weight by new 3-compartmental model and true dry weight was 0.993. Bland- Airman plot revealed good consistency between the two methods with stable and minor diffidence as their differences fluctuated near zero. Conclusion Different bioelectrical impedance measuring instrument gives rise to the impact on measured data. In this study, the new 3-compartment model predicts the dry weight of MHD patients more accurately.%目的 探讨运用生物电阻抗预测方程评价维持性血液透析(maintenance hemodialysis,MHD)患者干体质量的准确性. 方法 使用多频生物电阻抗分析仪测定60例MHD患者50千赫下电阻抗值,结合斜率法、新三室模型预测MHD患者干体质量.经下腔静脉直径(inferior vena cava diameter,IVCD)等综合评价,认为患者的干体质量即入选患者本次透析后体质量,可用于干体质量准确性评价.另选择性别、年龄、身高,体质量和体质量指数(BMI)相匹配个体87例,用于构建方程系数及与MHD患

  4. Drying Spirulina with Foam Mat Drying at Medium Temperature

    Directory of Open Access Journals (Sweden)

    Aji Prasetyaningrum

    2012-10-01

    Full Text Available Spirulina is a single cell blue green microalgae (Cyanobacteria containing many Phytonutrients (Beta-carotene, Chlorophyl, Xanthophyl, Phyocianin using as anti-carcinogen in food. Producing dry spirulina by quick drying process at medium temperature is very important to retain the Phytonutrient quality. Currently, the work is still challenging due to the gel formation that block the water diffusion from inside to the surface.  This research studies the performance of foam-mat drying on production of dry spirulina. In this method the spirulina was mixed with foaming agent (glair/egg albumen, popular as white egg at 2.5% by weight at air velocity 2.2 m/sec. Here, the effect of spirulina thickness and operational temperature on drying time and quality (Beta-carotene and color were observed. The drying time was estimated based on the measurement of water content in spirulina versus time. Result showed that the thicker spirulina, the longer drying time. Conversely, the higher operational temperature, faster drying time. At thickness ranging 1-3 mm and operational temperature below 70oC, the quality of spirulina can fit the market requirement

  5. Weight Management

    Science.gov (United States)

    ... Anger Weight Management Weight Management Smoking and Weight Healthy Weight Loss Being Comfortable in Your Own Skin Your Weight Loss Expectations & Goals Healthier Lifestyle Healthier Lifestyle Physical Fitness Food & Nutrition Sleep, Stress & Relaxation Emotions & Relationships HealthyYouTXT ...

  6. Analyses of Problems of Dry Gas Seals in a Cycle Compressor of Hydrocracking Unit%加氢裂化装置干气密封的故障分析与改造

    Institute of Scientific and Technical Information of China (English)

    钟伟明; 李纪云; 许静

    2011-01-01

    针对某厂加氢裂化装置循环压缩机轴端用T型槽干气密封(T-DGS)在开工不久和首次改造后使用过程中连续两次失效造成停车的事故,对干气密封进行解体分析,提出密封失效的原因和相应的技改措施,在解决现场装置中存在的主密封气短路、密封气带液、火炬气反窜等问题之后,机组开车一次成功,确保了生产装置的安全稳定运行.有关成果将为现场T-DGS出现相似问题的及时解决及T-DGS的设计提供有益指导.%Dry gas seals with T-grooves were disintegrated and analyzed for resolving the problems related to the two continuous failures when they were used in a cycle compressor of hydrocracking unit. The causes for the failures of such T-grooved dry gas seals and their solutions were presented. The cycle compressor with the improved T-grooved gas seal had operated successfully at one time after the problems were resolved, which mainly- referred to primary sealed gas short-circle, sealed gas condensed to liquid,flare gas returning. The unit was sure to be running in normal condition. The methods and experiences presented here should be useful to the problems resolved and the geometrical designs of a T-grooved dry gas seal.

  7. Drying Characteristics and Product Quality of Lemon Slices Dried with Hot Air Circulation Oven and Hybrid Heatpump Dryers

    Directory of Open Access Journals (Sweden)

    Yong Hong Lee

    2014-12-01

    Full Text Available In this research, drying characteristics and product quality of Coulomb-force-assisted heatpump and oven dried lemon slices were studied. Lemon slices with 3 mm thickness each, were dried using oven and Coulomb-force-assisted-heatpump dryer with and without auxiliary heater at different drying conditions. It was found that the drying rate of the lemon slices dried by all drying methods showed only falling rate states, which indicates the drying kinetics were controlled by internal moisture diffusion. Oven drying of lemon slices at 60°C showed the highest drying rate among all, followed by oven dried slices at 50°C, Coulomb-force-heater-assisted-heatpump (CF-HT-HP dried slices at 31°C, Coulomb-force-assisted-heatpump (CF-HP dried slices at 22°C, oven dried slices at 40°C and heatpump dried slices at 22°C. The average effective moisture diffusivity value for the slices dried with these drying methods was found in the range of 16.2 to 63.8´10-4 mm2min-1. In terms of quality assessment, CF-HP dried lemon slices retained the highest amount of Vitamin C as compared to the lemon slices dried by other drying methods. However, it retained relatively lower amount of total phenolic content (TPC as compared to oven dried products. Among of all, CF-HP drying method produced dried lemon slices with the highest Vitamin C (6.74 mg AA / g dry weight whereas oven dried lemon slices at 50°C preserved most of the TPC in the dried slices, which recorded as 13.76 mg GA / g dry weight.

  8. Flavoring, Casing and Blending Control Based on Dry Weight of Tobacco%物料干重控制模式在加香加料及掺配环节中的应用

    Institute of Scientific and Technical Information of China (English)

    易浩; 廖文大; 杜文; 尹大锋; 胡长锋

    2012-01-01

    为提高卷烟产品质量的稳定性,研究了在制丝过程中按物料干重进行加料量、加香量的计算,以及按烟丝和梗丝干重计算掺配量的方法.结果表明,按实际干重加料、加香和掺配的加工工艺与传统不考虑物料含水率变化的加工工艺相比:①加料精度提高,批次间糖料用量的标准偏差从2.69 kg降低到2.45 kg;②加香精度提高,批次间香精用量的标准偏差从0.86 kg降低到0.72 kg;③掺配精度提高,批次间梗丝用量的标准偏差从37.2 kg降低到35.8 kg;④批次间卷烟产品的烟气总粒相物、焦油、烟碱和CO的标准偏差下降39%以上.%In order to improve the consistency of cigarette quality,the method for casing,flavoring and tobacco blending on the basis of the dry weight of tobacco in processing were researched. Comparing with traditional method which neglected the variation of moisture content in tobacco, the new method had the following advantages: 1) the inter-batch standard deviation of sugar consumption reduced from 2.69 to 2.45 kg; 2) the inter-batch standard deviation of flavoring consumption reduced from 0.86 to 0.72 kg; 3) the inter-batch standard deviation of stem consumption decreased from 37.2 to 35.8 kg;4) the inter-batch standard deviations of TPM,tar,nicotine and CO deliveries in mainstream cigarette smoke declined by more than 39%.

  9. Morphology of drying blood pools

    Science.gov (United States)

    Laan, Nick; Smith, Fiona; Nicloux, Celine; Brutin, David; D-Blood project Collaboration

    2016-11-01

    Often blood pools are found on crime scenes providing information concerning the events and sequence of events that took place on the scene. However, there is a lack of knowledge concerning the drying dynamics of blood pools. This study focuses on the drying process of blood pools to determine what relevant information can be obtained for the forensic application. We recorded the drying process of blood pools with a camera and measured the weight. We found that the drying process can be separated into five different: coagulation, gelation, rim desiccation, centre desiccation, and final desiccation. Moreover, we found that the weight of the blood pool diminishes similarly and in a reproducible way for blood pools created in various conditions. In addition, we verify that the size of the blood pools is directly related to its volume and the wettability of the surface. Our study clearly shows that blood pools dry in a reproducible fashion. This preliminary work highlights the difficult task that represents blood pool analysis in forensic investigations, and how internal and external parameters influence its dynamics. We conclude that understanding the drying process dynamics would be advancement in timeline reconstitution of events. ANR funded project: D-Blood Project.

  10. Drying and color characteristics of coriander foliage using convective thin-layer and microwave drying.

    Science.gov (United States)

    Shaw, Mark; Meda, Venkatesh; Tabil, Lope; Opoku, Anthony

    2007-01-01

    Heat sensitive properties (aromatic, medicinal, color) provide herbs and spices with their high market value. In order to prevent extreme loss of heat sensitive properties when drying herbs, they are normally dried at low temperatures for longer periods of time to preserve these sensory properties. High energy consumption often results from drying herbs over a long period. Coriander (Coriandrum sativum L., Umbelliferae) was dehydrated in two different drying units (thin layer convection and microwave dryers) in order to compare the drying and final product quality (color) characteristics. Microwave drying of the coriander foliage was faster than convective drying. The entire drying process took place in the falling rate period for both microwave and convective dried samples. The drying rate for the microwave dried samples ranged from 42.3 to 48.2% db/min and that of the convective dried samples ranged from 7.1 to 12.5% db/min. The fresh sample color had the lowest L value at 26.83 with higher L values for all dried samples. The results show that convective thin layer dried coriander samples exhibited a significantly greater color change than microwave dried coriander samples. The color change index values for the microwave dried samples ranged from 2.67 to 3.27 and that of the convective dried samples varied from 4.59 to 6.58.

  11. An unusually dry story

    Directory of Open Access Journals (Sweden)

    Srinivas Rajagopala

    2015-01-01

    Full Text Available We present a middle-aged woman with a prior history of central nervous system (CNS demyelinating disorder who presented with an acute onset quadriparesis and respiratory failure. The evaluation revealed distal renal tubular acidosis with hypokalemia and medullary nephrocalcinosis. Weakness persisted despite potassium correction, and ongoing evaluation confirmed recurrent CNS and long-segment spinal cord demyelination with anti-aquaporin-4 antibodies. There was no history of dry eyes or dry mouth. Anti-Sjogren′s syndrome A antigen antibodies were elevated, and there was reduced salivary flow on scintigraphy. Coexistent antiphospholipid antibody syndrome with inferior vena cava thrombosis was also found on evaluation. The index patient highlights several rare manifestations of primary Sjogren′s syndrome (pSS as the presenting features and highlights the differential diagnosis of the clinical syndromes in which pSS should be considered in the Intensive Care Unit.

  12. 直接空冷机组乏汽供热技术改造%Analysis of Heating Transformation with Exhaust Steam on Direct Dry Cooling Units

    Institute of Scientific and Technical Information of China (English)

    焦存生; 张杰英

    2014-01-01

    为增加供热面积和提高机组热效率,某化工生产企业自备电厂采用高背压真空加热器吸收机组乏汽余热,对热电联产直接空冷机组进行了供热技术改造。改造后,机组减少了冷源损失,提高了循环热效率,供暖循环水温度升高了15~20℃,厂用电率下降了1.5%~2%,经过整个供热周期的考验,机组及供热系统运行状况良好,达到了改造目的。并给出了机组继续进行热、电、冷三联产深度节能技术改造的建议。%In order to increase the heating area and improve the unit efficiency, the heating transformation with exhaust steam on direct air-cooling units was conducted in a power plant owned by chemical production enterprise, by using high back pressure vacuum heater absorption unit's waste heat of exhaust steam. After the reformation, reduced the heat loss of the cold end and improved the overall thermal efficiency, circulating water temperature was increased by 15~20℃, and power consumption rate dropped by 1.5%~2%. After the whole heating cycle test, the operation conditions of the unit and heating system were all good, attained the transform objective. And given the suggestions that the units continued to reform with heat, electricity and cooling three generation mode.

  13. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Eye Symptoms Causes of Dry Eye Dry Eye Treatment What Is Dry Eye? Written By: Kierstan Boyd ... your vision. Privacy Policy Related New Dry Eye Treatment is a Tear-Jerker Jul 21, 2017 Three ...

  14. High-throughput prediction of tablet weight and trimethoprim content of compound sulfamethoxazole tablets for controlling the uniformity of dosage units by NIR.

    Science.gov (United States)

    Dong, Yanhong; Li, Juan; Zhong, Xiaoxiao; Cao, Liya; Luo, Yang; Fan, Qi

    2016-04-15

    This paper establishes a novel method to simultaneously predict the tablet weight (TW) and trimethoprim (TMP) content of compound sulfamethoxazole tablets (SMZCO) by near infrared (NIR) spectroscopy with partial least squares (PLS) regression for controlling the uniformity of dosage units (UODU). The NIR spectra for 257 samples were measured using the optimized parameter values and pretreated using the optimized chemometric techniques. After the outliers were ignored, two PLS models for predicting TW and TMP content were respectively established by using the selected spectral sub-ranges and the reference values. The TW model reaches the correlation coefficient of calibration (R(c)) 0.9543 and the TMP content model has the R(c) 0.9205. The experimental results indicate that this strategy expands the NIR application in controlling UODU, especially in the high-throughput and rapid analysis of TWs and contents of the compound pharmaceutical tablets, and may be an important complement to the common NIR on-line analytical method for pharmaceutical tablets.

  15. Body weight perception among adolescents in Dubai, United Arab Emirates Percepción del peso corporal en los adolescentes de Dubai, Emiratos Árabes Unidos

    Directory of Open Access Journals (Sweden)

    A. O. Musaiger

    2012-12-01

    Full Text Available This study investigated the body image perceptions among adolescents in Dubai, United Arab Emirates (UAE. A cross-sectional survey was conducted amongst 661 adolescents (324 males; 337 females aged 12-17 years selected from government schools using a multistage stratified random sampling technique. A pretested validated questionnaire was employed to determine the perception of adolescents toward their weight status. A nine figure silhouette illustration was used to measure perceptions of their ideal body image and how it compares with their current body weight. The results reveled that overweight (18.5% and obesity (27.2% were higher among males than in females (13.1% and 20.5% respectively. A high proportion of overweight males and females considered themselves as average (45.0% and 52.3%, respectively. Similarly, 56.9% of obese male and 46.4% of females considered themselves as average weight. Of non-overweight/obese males and females, 27.6% and 39.3% respectively, were pressured by parents to gain weight (p > 0.000. In general overweight and obese adolescents were more likely to face pressure from their parents and teased by friends than non-overweight/obese adolescents. Compared to their current body image, overweight and obese adolescents chose a significantly lighter figure as their ideal (p Este estudio investigaba la percepción de la imagen corporal en los adolescentes de Dubái, Emiratos Árabes Unidos (EAU. Se realizó una encuesta transversal entre 661 adolescentes (324 chicos; 337 chicas con edades de 12-17 años, seleccionados de colegios públicos utilizando una técnica de muestreo aleatorio estratificado en varias etapas. Se empleó un cuestionario validado y previamente testado para determinar la percepción de los adolescentes con respecto a su peso. Se usó la ilustración de una silueta de los nueves para medir las percepciones de su imagen corporal ideal y cómo se comparaba con su peso corporal real. Los resultados

  16. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Español Eye Health / Eye Health A-Z Dry Eye Sections What Is Dry Eye? Dry Eye Symptoms ... Dry Eye Dry Eye Treatment What Is Dry Eye? Written By: Kierstan Boyd Reviewed By: Brenda Pagan- ...

  17. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Español Eye Health / Eye Health A-Z Dry Eye Sections What Is Dry Eye? Dry Eye Symptoms ... Dry Eye Dry Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué Es el Ojo Seco? ...

  18. Reflectance characteristics of dry plant materials

    Science.gov (United States)

    Elvidge, Christopher D.

    1987-01-01

    Chlorophyll and water obscure the absorption features of all other leaf constituents in the spectra of green leaves. The predominant near-IR and thermal IR spectral features of dry plant materials originate from lignin, cellulose, and hemicellulose. These compounds account for 80 to 98 percent of the dry weight in most plant materials.

  19. A criticality analysis of the GBC-32 dry storage cask with Hanbit nuclear power plant unit 3 fuel assemblies from the viewpoint of burnup credit

    Energy Technology Data Exchange (ETDEWEB)

    Yun, Hyung Ju; Kim, Do Yeon; Park, Kwang Heon; Hong, Ser Gi [Dept. of Nuclear Engineering, Kyung Hee University, Seoul (Korea, Republic of)

    2016-06-15

    Nuclear criticality safety analyses (NCSAs) considering burnup credit were performed for the GBC-32 cask. The used nuclear fuel assemblies (UNFAs) discharged from Hanbit Nuclear Power Plant Unit 3 Cycle 6 were loaded into the cask. Their axial burnup distributions and average discharge burnups were evaluated using the DeCART and Multi-purpose Analyzer for Static and Transient Effects of Reactors (MASTER) codes, and NCSAs were performed using SCALE 6.1/STandardized Analysis of Reactivity for Burnup Credit using SCALE (STARBUCS) and Monte Carlo N-Particle transport code, version 6 (MCNP 6). The axial burnup distributions were determined for 20 UNFAs with various initial enrichments and burnups, which were applied to the criticality analysis for the cask system. The UNFAs for 20- and 30-year cooling times were assumed to be stored in the cask. The criticality analyses indicated that keff values for UNFAs with nonuniform axial burnup distributions were larger than those with a uniform distribution, that is, the end effects were positive but much smaller than those with the reference distribution. The axial burnup distributions for 20 UNFAs had shapes that were more symmetrical with a less steep gradient in the upper region than the reference ones of the United States Department of Energy. These differences in the axial burnup distributions resulted in a significant reduction in end effects compared with the reference.

  20. Factors associated with inter-institutional variations in sepsis rates of very-low-birth-weight infants in 34 Malaysian neonatal intensive care units.

    Science.gov (United States)

    Boo, Nem-Yun; Cheah, Irene Guat-Sim

    2016-03-01

    This study aimed to determine whether patient loads, infant status on admission and treatment interventions were significantly associated with inter-institutional variations in sepsis rates in very-low-birth-weight (VLBW) infants in the Malaysian National Neonatal Registry (MNNR). This was a retrospective study of 3,880 VLBW (≤ 1,500 g) infants admitted to 34 neonatal intensive care units (NICUs) in the MNNR. Sepsis was diagnosed in symptomatic infants with positive blood culture. Sepsis developed in 623 (16.1%) infants; 61 (9.8%) had early-onset sepsis (EOS) and 562 (90.2%) had late-onset sepsis (LOS). The median EOS rate of all NICUs was 1.0% (interquartile range [IQR] 0%, 2.0%). Compared with NICUs reporting no EOS (n = 14), NICUs reporting EOS (n = 20) had significantly higher patient loads (total live births, admissions, VLBW infants, outborns); more mothers with a history of abortions, and antenatal steroids and intrapartum antibiotic use; more infants requiring resuscitation procedures at birth; higher rates of surfactant therapy, pneumonia and insertion of central venous catheters. The median LOS rate of all NICUs was 14.5% (IQR 7.8%, 19.2%). Compared with NICUs with LOS rates below the first quartile (n = 8), those above the third quartile (n = 8) used less intrapartum antibiotics, and had significantly bigger and more mature infants, more outborns, as well as a higher number of sick infants requiring ventilator support and total parenteral nutrition. Patient loads, resuscitation at birth, status of infants on admission and treatment interventions were significantly associated with inter-institutional variations in sepsis. Copyright: © Singapore Medical Association.

  1. Corrective Action Investigation Plan for Corrective Action Unit 165: Areas 25 and 26 Dry Well and Washdown Areas, Nevada Test Site, Nevada (including Record of Technical Change Nos. 1, 2, and 3) (January 2002, Rev. 0)

    Energy Technology Data Exchange (ETDEWEB)

    U.S. Department of Energy, National Nuclear Security Administration Nevada Operations Office (NNSA/NV)

    2002-01-09

    This Corrective Action Investigation Plan contains the U.S. Department of Energy, National Nuclear Security Administration Nevada Operations Office's approach to collect the data necessary to evaluate corrective action alternatives appropriate for the closure of Corrective Action Unit (CAU) 165 under the Federal Facility Agreement and Consent Order. Corrective Action Unit 165 consists of eight Corrective Action Sites (CASs): CAS 25-20-01, Lab Drain Dry Well; CAS 25-51-02, Dry Well; CAS 25-59-01, Septic System; CAS 26-59-01, Septic System; CAS 25-07-06, Train Decontamination Area; CAS 25-07-07, Vehicle Washdown; CAS 26-07-01, Vehicle Washdown Station; and CAS 25-47-01, Reservoir and French Drain. All eight CASs are located in the Nevada Test Site, Nevada. Six of these CASs are located in Area 25 facilities and two CASs are located in Area 26 facilities. The eight CASs at CAU 165 consist of dry wells, septic systems, decontamination pads, and a reservoir. The six CASs in Area 25 are associated with the Nuclear Rocket Development Station that operated from 1958 to 1973. The two CASs in Area 26 are associated with facilities constructed for Project Pluto, a series of nuclear reactor tests conducted between 1961 to 1964 to develop a nuclear-powered ramjet engine. Based on site history, the scope of this plan will be a two-phased approach to investigate the possible presence of hazardous and/or radioactive constituents at concentrations that could potentially pose a threat to human health and the environment. The Phase I analytical program for most CASs will include volatile organic compounds, semivolatile organic compounds, Resource Conservation and Recovery Act metals, total petroleum hydrocarbons, polychlorinated biphenyls, and radionuclides. If laboratory data obtained from the Phase I investigation indicates the presence of contaminants of concern, the process will continue with a Phase II investigation to define the extent of contamination. Based on the

  2. Thin Layer Drying Kinetics of Pineapple: Effect of Blanching ...

    African Journals Online (AJOL)

    Biochemical Engineering and Biotechnology Research Laboratory, ... ABSTRACT: Drying is an energy intensive unit operation and long drying periods tend to increase the energy ... (1997). However, blanching of some food materials such as.

  3. Weight Management

    Science.gov (United States)

    ... Health Information Weight Management English English Español Weight Management Obesity is a chronic condition that affects more ... Liver (NASH) Heart Disease & Stroke Sleep Apnea Weight Management Topics About Food Portions Bariatric Surgery for Severe ...

  4. Obtain and characterization of chitosan / propranolol microparticles by spray drying; Obtencao e caracterizacao de microparticulas de quitosana / propranolol por spray drying

    Energy Technology Data Exchange (ETDEWEB)

    Nascimento, Ednaldo G. do; Silva Junior, Arnobio A. da, E-mail: ednaldogn@yahoo.com.br [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Santos, Katia S.C.R. dos [Universidade Federal do Amazonas (UFAM), Manaus, AM (brazil)

    2015-07-01

    The study investigated the application of chitosan microparticles as carriers into hard gelatin capsule containing propranolol, evaluating the variability of the molecular weight and the chitosan particles by spray drying. The formulations were characterized by average weight, dosing unit dose uniformity and dissolution profile according to the pharmacopoeia. While the microparticles were characterized by Fourier transformed infrared spectroscopy, scanning electron microscopy and X-ray diffraction. The results showed that chitosan microparticles obtained without the drug and then physically mixed with propranolol promoted a modified release 85% of the drug after 5 hours. While, chitosan microparticles sprayed with propranolol released only 55% at 5 hours is presented both as a modified release system. Samples of dried chitosan showed up amorphous and homogeneous and spherical morphology. (author)

  5. Tree mortality from fires, bark beetles, and timber harvest during a hot and dry decade in the western United States (2003-2012)

    Science.gov (United States)

    Berner, Logan T.; Law, Beverly E.; Meddens, Arjan J. H.; Hicke, Jeffrey A.

    2017-06-01

    High temperatures and severe drought contributed to extensive tree mortality from fires and bark beetles during the 2000s in parts of the western continental United States. Several states in this region have greenhouse gas (GHG) emission targets and would benefit from information on the amount of carbon stored in tree biomass killed by disturbance. We quantified mean annual tree mortality from fires, bark beetles, and timber harvest from 2003-2012 for each state in this region. We estimated tree mortality from fires and beetles using tree aboveground carbon (AGC) stock and disturbance data sets derived largely from remote sensing. We quantified tree mortality from harvest using data from US Forest Service reports. In both cases, we used Monte Carlo analyses to track uncertainty associated with parameter error and temporal variability. Regional tree mortality from harvest, beetles, and fires (MORTH+B+F) together averaged 45.8 ± 16.0 Tg AGC yr-1 (±95% confidence interval), indicating a mortality rate of 1.10 ± 0.38% yr-1. Harvest accounted for the largest percentage of MORTH+B+F (˜50%), followed by beetles (˜32%), and fires (˜18%). Tree mortality from harvest was concentrated in Washington and Oregon, where harvest accounted for ˜80% of MORTH+B+F in each state. Tree mortality from beetles occurred widely at low levels across the region, yet beetles had pronounced impacts in Colorado and Montana, where they accounted for ˜80% of MORTH+B+F. Tree mortality from fires was highest in California, though fires accounted for the largest percentage of MORTH+B+F in Arizona and New Mexico (˜50%). Drought and human activities shaped regional variation in tree mortality, highlighting opportunities and challenges to managing GHG emissions from forests. Rising temperatures and greater risk of drought will likely increase tree mortality from fires and bark beetles during coming decades in this region. Thus, sustained monitoring and mapping of tree mortality is necessary to

  6. 催化干气回收乙烯装置中脱碳塔内件形式优化改造%Optimal Modification of Internals in Decarbonization Column of Catalytic Dry Gas Ethylene Recovery Unit

    Institute of Scientific and Technical Information of China (English)

    刘玉花

    2016-01-01

    脱碳塔是影响催化干气回收乙烯装置处理量的瓶颈。装置低负荷运行时脱碳塔操作平稳,而负荷升高时塔顶部分液罐中液位升高,操作不正常,净化气带胺液跑损严重。分析了脱碳塔的特殊性,结合现场操作存在问题,选用消泡型内件及填料对脱碳塔进行改造,改造后装置操作弹性增加,处理能力提高,脱碳塔胺液夹带现象明显降低,胺液补充量显著减少,经济效益显著,可为类似系统内件改造提供借鉴。%Decarbonization column is the bottleneck which affecting the capacity of the catalytic dry gas ethylene recovery unit.When the unit operating in low load,the decarbonization column under steady state.However,when the operation load increase,the liquid level of the liquid sep-arate pot will rise and the operation state gets bad.The particularity of decarbonization column is analyzed and combined with the problems encountered in actual operating situation,and the opti-mal modification of the internals in decarbonization column is put forward.Through selecting the defoaming internals and modifying,the flexibility of the operation and the capacity of the unit is increased.Moreover,the amine liquid consumption is decreased obviously and the economic bene-fit is remarkable.An important reference for the similar device is provided.

  7. Recent advances in drying and dehydration of fruits and vegetables: a review

    OpenAIRE

    Sagar, V. R.; P Suresh Kumar

    2010-01-01

    Fruits and vegetables are dried to enhance storage stability, minimize packaging requirement and reduce transport weight. Preservation of fruits and vegetables through drying based on sun and solar drying techniques which cause poor quality and product contamination. Energy consumption and quality of dried products are critical parameters in the selection of drying process. An optimum drying system for the preparation of quality dehydrated products is cost effective as it shortens the drying ...

  8. The efficacy and nephrotoxicity associated with colistin use in an intensive care unit in Vietnam: Use of colistin in a population of lower body weight

    Directory of Open Access Journals (Sweden)

    Nguyen Gia Binh

    2015-06-01

    Conclusion: A personalized dosing protocol of colistin was effective, with low nephrotoxicity, among critically ill Vietnamese patients with low body weight. Further studies are warranted for assessing the efficacy and toxicity in a larger cohort.

  9. Evaluation of the effect of alternative measurements of body weight gain and dry matter intake for the calculation of residual feed intake in growing purebred Charolais and Red Angus cattle.

    Science.gov (United States)

    Kayser, W; Glaze, J B; Welch, C M; Kerley, M; Hill, R A

    2015-07-01

    The objective of this study was to determine the effects of alternative-measurements of body weight and DMI used to evaluate residual feed intake (RFI). Weaning weight (WW), ADG, and DMI were recorded on 970 growing purebred Charolais bulls (n = 519) and heifers (n = 451) and 153 Red Angus growing steers (n = 69) and heifers (n = 84) using a GrowSafe (GrowSafe, Airdrie, Alberta, Canada) system. Averages of individual DMI were calculated in 10-d increments and compared to the overall DMI to identify the magnitude of the errors associated with measuring DMI. These incremental measurements were also used in calculation of RFI, computed from the linear regression of DMI on ADG and midtest body weight0.75 (MMWT). RFI_Regress was calculated using ADG_Regress (ADG calculated as the response of BW gain and DOF) and MMWT_PWG (metabolic midweight calculated throughout the postweaning gain test), considered the control in Red Angus. A similar calculation served as control for Charolais; RFI was calculated using 2-d consecutive start and finish weights (RFI_Calc). The RFI weaning weight (RFI_WW) was calculated using ADG_WW (ADG from weaning till the final out weight of the postweaning gain test) and MMWT_WW, calculated similarly. Overall average estimated DMI was highly correlated to the measurements derived over shorter periods, with 10 d being the least correlated and 60 d being the most correlated. The ADG_Calc (calculated using 2-d consecutive start and finish weight/DOF) and ADG_WW were highly correlated in Charolais. The ADG_Regress and ADG_Calc were highly correlated, and ADG_Regress and ADG_WW were moderately correlated in Red Angus. The control measures of RFI were highly correlated with the RFI_WW in Charolais and Red Angus. The outcomes of including abbreviated period DMI in the model with the weaning weight gain measurements showed that the model using 10 d of intake (RFI WW_10) was the least correlated with the control measures. The model with 60 d of intake had

  10. Weighted Clustering

    CERN Document Server

    Ackerman, Margareta; Branzei, Simina; Loker, David

    2011-01-01

    In this paper we investigate clustering in the weighted setting, in which every data point is assigned a real valued weight. We conduct a theoretical analysis on the influence of weighted data on standard clustering algorithms in each of the partitional and hierarchical settings, characterising the precise conditions under which such algorithms react to weights, and classifying clustering methods into three broad categories: weight-responsive, weight-considering, and weight-robust. Our analysis raises several interesting questions and can be directly mapped to the classical unweighted setting.

  11. Institute of Medicine 2009 Gestational Weight Gain Guideline Knowledge: Survey of Obstetrics/Gynecology and Family Medicine Residents of the United States

    Science.gov (United States)

    Moore Simas, Tiffany A.; Waring, Molly E.; Sullivan, Gina M. T.; Liao, Xun; Rosal, Milagros C.; Hardy, Janet R.; Berry, Robert E.

    2014-01-01

    Background In 2009, the Institute of Medicine revised gestational weight gain recommendations; revisions included body mass index (BMI) category cut-point changes and provision of range of gain for obese women. Our objective was to examine resident prenatal care providers’ knowledge of revised guidelines. Methods Anonymous electronic survey of Obstetrics/Gynecology and Family Medicine residents across U.S. from January–April 2010. Results 660 completed the survey; 79% female and 69% aged 21–30 years. When permitted to select ≥1 response, 87.0% reported using BMI to assess weight status at initial visits, 44.4% reported using “clinical impression based on patient appearance”, and 1.4% reported not using any parameters. When asked the most important baseline parameter for providing recommendations, 35.8% correctly identified pre-pregnancy BMI, 2.1% reported “I don’t provide guidelines,” and 4.5% reported “I do not discuss gestational weight gain.” 57.6% reported not being aware of new guidelines. Only 7.6% selected correct BMI ranges for each category. Only 5.8% selected correct gestational weight gain ranges. Only 2.3% correctly identified both BMI cutoffs and recommended gestational weight gain ranges per 2009 guidelines. Conclusions Guideline knowledge is the foundation of accurate counseling, yet resident prenatal care providers were minimally aware of the 2009 Institute of Medicine gestational weight gain guidelines almost a year after their publication. PMID:24344704

  12. Intermittent Microwave Drying of Wheat (Triticum aestivum L.) Seeds

    OpenAIRE

    Yan Li; Tao Zhang; Chenglai Wu; Chunqing Zhang

    2014-01-01

    The purpose of present study was to characterize the intermittent microwave drying of wheat seeds. Results revealed that microwave on time percentage (MOTP) and initial moisture content were the main parameters which influenced the intermittent microwave drying rate and the germination capacity of dried seeds. Best intermittent microwave drying (power: 800 W; seed sample weight: 100 g, microwave on time in each cycle: 32 s) without significantly decreasing the germination rate was...

  13. Performance of transonic fan stage with weight flow per unit annulus area of 178 kilograms per second per square meter (6.5(lb/sec)/(sq ft))

    Science.gov (United States)

    Moore, R. D.; Urasek, D. C.; Kovich, G.

    1973-01-01

    The overall and blade-element performances are presented over the stable flow operating range from 50 to 100 percent of design speed. Stage peak efficiency of 0.834 was obtained at a weight flow of 26.4 kg/sec (58.3 lb/sec) and a pressure ratio of 1.581. The stall margin for the stage was 7.5 percent based on weight flow and pressure ratio at stall and peak efficiency conditions. The rotor minimum losses were approximately equal to design except in the blade vibration damper region. Stator minimum losses were less than design except in the tip and damper regions.

  14. Weight Control

    Science.gov (United States)

    ... obese. Achieving a healthy weight can help you control your cholesterol, blood pressure and blood sugar. It ... use more calories than you eat. A weight-control strategy might include Choosing low-fat, low-calorie ...

  15. Weighted Clustering

    DEFF Research Database (Denmark)

    Ackerman, Margareta; Ben-David, Shai; Branzei, Simina

    2012-01-01

    We investigate a natural generalization of the classical clustering problem, considering clustering tasks in which different instances may have different weights.We conduct the first extensive theoretical analysis on the influence of weighted data on standard clustering algorithms in both...... the partitional and hierarchical settings, characterizing the conditions under which algorithms react to weights. Extending a recent framework for clustering algorithm selection, we propose intuitive properties that would allow users to choose between clustering algorithms in the weighted setting and classify...

  16. Clinical Indicators of Late-Onset Sepsis Workup in Very Low-Birth-Weight Infants in the Neonatal Intensive Care Unit.

    Science.gov (United States)

    Das, Anirudha; Shukla, Sonia; Rahman, Nazia; Gunzler, Douglas; Abughali, Nazha

    2016-07-01

    Background Late-onset sepsis (LOS) in very low-birth-weight (VLBW) infants is associated with significant morbidity and mortality. Objectives To determine the incidence of LOS workup, association, and predictive value of clinical indicators leading to culture-positive versus culture-negative sepsis workup. Methods All sepsis workups performed after 7 days of life, in neonates with birth weight of birth weight, corrected gestational age, and chronological age, at the time of workup. The clinical indicators leading to the performance of sepsis workup were compared between cases and controls. Results The incidence of culture-positive workup was 87/345 (25.2%) and that of LOS was 84/279 (30.1%). Among various clinical indicators, hypothermia and apnea were significantly associated with culture-positive sepsis workup (p = 0.015 and 0.004, respectively), with a positive predictive value of 81.2 and 71.4%, respectively. Conclusion In VLBW infants, one-fourth of sepsis workups resulted in a positive culture. Apnea and hypothermia were the most significant predictors of culture-positive workup after matching for GA, birth weight, chronological age, and corrected GA at the time of the workup.

  17. Birth Weight

    Science.gov (United States)

    ... baby, taken just after he or she is born. A low birth weight is less than 5.5 pounds. A high ... weight is more than 8.8 pounds. A low birth weight baby can be born too small, too early (premature), or both. This ...

  18. DRYING OF EMPTY FRUIT BUNCHES AS WASTED BIOMASS BY HYBRID SOLAR–THERMAL DRYING TECHNIQUE

    OpenAIRE

    H. H. Al-Kayiem; Y. Md Yunus

    2013-01-01

    Solar drying of EFB is highly feasible and economic, but the solar drying process is interrupted during cloudy or rainy days and also at night. In the present paper, a combined solar, as the main heat input, and biomass burner, as an auxiliary source of thermal energy, has been investigated experimentally to dry EFB. An experimental model consisting of a solar dryer integrated with a thermal backup unit was designed and fabricated. A series of experimental measurements were carried out in fou...

  19. 干-湿冷却系统对空冷机组热经济性影响的分析%Thermal economy analysis of power unit with wet-dry hybrid cooling system

    Institute of Scientific and Technical Information of China (English)

    郭民臣; 纪执琴; 安广然; 李安生

    2015-01-01

    Air-cooling power units have high back pressures in summer due to high environment temperatures, reducing the power output, thermal efficiency and operation safety. In this study, a wet-dry hybrid cooling system is analyzed with part of exhaust steam cooling by circulating water to decrease the unit back pressure in summer. A mathematic model is established for the effect of wet-dry hybrid cooling system on the thermal economy. Variations of back pressure and net power output with the live steam flow rate, exhaust steam distribution and environmental temperatures are analyzed for a 330 MW direct air cooling power unit. The results show that the power output increases from 326.266 MW to 330 MW and the back pressure drops from 46.8 kPa to 31.9 kPa as the live steam flow rate increases to1120 t·h−1 and the distribution steam flow rate with wet cooling increases to 175 t·h−1. The heat consumption rate decreases 110.9 kJ·(kW·h)−1 and generation standard coal consumption rate decreases 4 g·(kW·h)−1.%受环境温度影响,空冷机组夏季工况的运行背压高,严重限制了机组的带负荷能力,并影响机组的热经济性和安全性。分析了一种干-湿混合冷却系统,将汽轮机排汽分流出一部分通过循环水冷却,以降低机组夏季工况背压。建立了干-湿混合冷却系统对机组热经济性影响的数学模型,并以某330 MW直接空冷机组为例揭示了机组背压和净功率随主蒸汽流量、湿冷分流量以及环境温度的变化规律。结果表明:主蒸汽流量为1120 t·h−1、湿冷分流量为175 t·h−1时,机组出力从326.266 MW达到330 MW满负荷运行,提高了3.734 MW,背压由46.8 kPa下降到31.9 kPa,机组的热耗率降低了110.9 kJ·(kW·h)−1,发电标准煤耗率降低了4 g·(kW·h)−1。

  20. Optimization of a solar-assisted drying system for drying bananas

    Energy Technology Data Exchange (ETDEWEB)

    Smitabhindu, R. [Department of Industrial Engineering, Kasetsart University, Bangkok 10900 (Thailand); Janjai, S. [Department of Physics, Faculty of Science, Silpakorn University, Nakhon Pathom 73000 (Thailand); Chankong, V. [Department of Electrical Engineering and Computer Science, Case Western Reserve University, Cleveland, OH (United States)

    2008-07-15

    This paper presents a mathematical model for optimal design of a solar-assisted drying system for drying bananas. The optimization model consists of a simulation model of a solar-assisted drying system combined with an economic model. The simulation model is composed of two systems of differential equations: one for the collector and other for the drying cabinet. These systems of the differential equation were solved using the finite difference method. Values of the model parameters were determined experimentally. A computer program in FORTRAN was developed to simulate the performance of the drying system. The model was validated by comparing the simulation results with the experimental results and they were in good agreement. This simulation model was used for the optimization of the solar-assisted drying system. An economic model was formulated to calculate the annual drying cost. The optimization problem was defined as the optimization of the geometry and operational parameters of the drying system so as to minimize the drying cost per unit of dried product. Currently used collector area and the air recycle factor were considered as the parameters for basic mode of operation of the drying system. The adaptive pattern search technique was adopted to find the optimum values of the solar collector area and the recycle factor. The optimum values of the collector area and the recycle factor were found to be 26 m{sup 2} and 90%, respectively. The computer program developed in this study can be used to optimize similar drying systems. (author)

  1. CO2 (dry ice) cleaning system

    Science.gov (United States)

    Barnett, Donald M.

    1995-03-01

    Tomco Equipment Company has participated in the dry ice (solid carbon dioxide, CO2) cleaning industry for over ten years as a pioneer in the manufacturer of high density, dry ice cleaning pellet production equipment. For over four years Tomco high density pelletizers have been available to the dry ice cleaning industry. Approximately one year ago Tomco introduced the DI-250, a new dry ice blast unit making Tomco a single source supplier for sublimable media, particle blast, cleaning systems. This new blast unit is an all pneumatic, single discharge hose device. It meters the insertion of 1/8 inch diameter (or smaller), high density, dry ice pellets into a high pressure, propellant gas stream. The dry ice and propellant streams are controlled and mixed from the blast cabinet. From there the mixture is transported to the nozzle where the pellets are accelerated to an appropriate blasting velocity. When directed to impact upon a target area, these dry ice pellets have sufficient energy to effectively remove most surface coatings through dry, abrasive contact. The meta-stable, dry ice pellets used for CO2 cleaning, while labeled 'high density,' are less dense than alternate, abrasive, particle blast media. In addition, after contacting the target surface, they return to their equilibrium condition: a superheated gas state. Most currently used grit blasting media are silicon dioxide based, which possess a sharp tetrahedral molecular structure. Silicon dioxide crystal structures will always produce smaller sharp-edged replicas of the original crystal upon fracture. Larger, softer dry ice pellets do not share the same sharp-edged crystalline structures as their non-sublimable counterparts when broken. In fact, upon contact with the target surface, dry ice pellets will plastically deform and break apart. As such, dry ice cleaning is less harmful to sensitive substrates, workers and the environment than chemical or abrasive cleaning systems. Dry ice cleaning system

  2. Variations in weight stigma concerns

    Directory of Open Access Journals (Sweden)

    Jessica E. Cornick

    2016-12-01

    Full Text Available Over the past 40 years, obesity rates in the United States have grown significantly; these rates have not grown uniformly across the United States (18 of the 20 counties with the highest obesity rates are located in the South. Obesity increases cardiovascular disease risk factors and new research has highlighted the negative psychological effects of obesity, known as weight stigma, including decreased selfcontrol resources, over eating, and exercise avoidance. The primary objective of this study was to determine if weight stigma concerns varied regionally and if social behaviors influenced this variation. In two studies, we collected cross-sectional data from participants in the United States including height and weight, weight stigma concerns, and perception of friends’ preoccupation with weight and dieting. We also collected each participant’s home zip code which was used to locate local obesity rate. We established differences in the relationship between body mass index and weight stigma concerns by local county obesity rate and showed that perceived friend preoccupation with weight and dieting mediated this relationship for individuals in low and medium obesity rate counties. For individuals living in United States counties with lower levels of obesity, increases in personal body mass index leads to increased weight stigma concerns due to an increase in perceived friend preoccupation with weight and dieting. These results indicate that relationships between body mass index, weight stigma concerns, and social networks vary significantly for subpopulations throughout the United States.

  3. Variations in Weight Stigma Concerns

    Science.gov (United States)

    Teter, Cambridge; K.Thaw, Andrew

    2016-01-01

    Over the past 40 years, obesity rates in the United States have grown significantly; these rates have not grown uniformly across the United States (18 of the 20 counties with the highest obesity rates are located in the South). Obesity increases cardiovascular disease risk factors and new research has highlighted the negative psychological effects of obesity, known as weight stigma, including decreased selfcontrol resources, over eating, and exercise avoidance. The primary objective of this study was to determine if weight stigma concerns varied regionally and if social behaviors influenced this variation. In two studies, we collected cross-sectional data from participants in the United States including height and weight, weight stigma concerns, and perception of friends’ preoccupation with weight and dieting. We also collected each participant’s home zip code which was used to locate local obesity rate. We established differences in the relationship between body mass index and weight stigma concerns by local county obesity rate and showed that perceived friend preoccupation with weight and dieting mediated this relationship for individuals in low and medium obesity rate counties. For individuals living in United States counties with lower levels of obesity, increases in personal body mass index leads to increased weight stigma concerns due to an increase in perceived friend preoccupation with weight and dieting. These results indicate that relationships between body mass index, weight stigma concerns, and social networks vary significantly for subpopulations throughout the United States. PMID:28058288

  4. Study on Drying Characteristic of Chinese Fir and Poplar Plantation Wood

    Institute of Scientific and Technical Information of China (English)

    ZHOUYongdong; LIXiaoling

    2004-01-01

    The drying characteristic was studied for plantation wood of Chinese fir and poplar, which are typical plantation wood of southern and northern part of China, respectively. Through lO0-degree-method the drying characteristic and basic drying condition were gotten, then drying schedule was developed for practical drying, the results showed that the drying schedule is suitable for Chinese fir and poplar plantation lumber, but shrinkage is large. The recommendation was made that enough dead weight is needed to decrease shrinkage in drying process. The drying quality of the two species of lumber is good in conventional drying method.

  5. Recent advances in drying and dehydration of fruits and vegetables: a review.

    Science.gov (United States)

    Sagar, V R; Suresh Kumar, P

    2010-01-01

    Fruits and vegetables are dried to enhance storage stability, minimize packaging requirement and reduce transport weight. Preservation of fruits and vegetables through drying based on sun and solar drying techniques which cause poor quality and product contamination. Energy consumption and quality of dried products are critical parameters in the selection of drying process. An optimum drying system for the preparation of quality dehydrated products is cost effective as it shortens the drying time and cause minimum damage to the product. To reduce the energy utilization and operational cost new dimensions came up in drying techniques. Among the technologies osmotic dehydration, vacuum drying, freeze drying, superheated steam drying, heat pump drying and spray drying have great scope for the production of quality dried products and powders.

  6. 不同生育时期的干旱胁迫对豌豆干物质积累及产量的影响%Effects of drought stress at different periods on dry weight and yield of pea

    Institute of Scientific and Technical Information of China (English)

    张维; 郭丽琢

    2015-01-01

    Pea is the main rotation crop in arid region.Researching the compensatory effect of re-wate-ring after drought stress can lay the theoretical foundation for the full compensation and then the reduced production losses.Soil culture experiment was conducted to study the effects of drought stress on dry mat-ter accumulation and yield of pea.Stress of 50% relative water content was exerted in three ways,i.e.bud-ding stage-flowering and podding stage-maturation period (W2 ),branching stage-budding stage + flower-ing and podding stage-maturation period (W3 ),branching stage-budding stage-flowering and podding stage (W4 ),while 75% relative water content was maintained in whole growth stage (W1 )as contrast (CK). The result showed that drought stress significantly reduced the dry matter accumulation,which trended to-wards W1>W3>W2>W4 in flowering to podding stage and maturation period.W3 had a compensation effect on growth rate.The reduction of dry matter accumulation resulted from water shortage in budding stage to flowering and podding stage was the highest.Compared with CK,the number of pods and grain yield per plant were significantly reduced under the three kinds of drought stress condition.Grain yield of W3 increased by 18%~26% than that of W2 and W4 .W3 had the highest compensatory effect of re-wate- ring in these three stress treatments.%豌豆是旱区主要的轮作倒茬作物,研究干旱胁迫后豌豆的复水效应可为充分发挥补偿作用而降低减产损失奠定理论基础.试验采用土培方法,单因素4水平试验,研究了全生育期正常供水的对照(W1),花荚期+成熟期50%相对含水量胁迫(W2)、孕蕾期+成熟期50%相对含水量胁迫(W3)和孕蕾期+花荚期50%相对含水量胁迫(W4)4种处理对豌豆干物质累积和产量的影响.结果表明:相对于全生育期正常供水的对照(W1),干旱胁迫显著降低了豌豆的干物质积累量;花荚期及成熟期的干物质量均呈现 W1>W3>W2>W4

  7. PROFITABILTY OF DRIED FIG PRODUCTION: A CASE STUDY OF TURKEY

    Directory of Open Access Journals (Sweden)

    Murat Yercan

    2003-06-01

    Full Text Available Dried fig production has a great important in the western part of Turkey in terms of foreign trade, farmers income and employment. In this paper, dried fig produced by farmers has been analyzed to determine production costs and profitability level. For this, selected farmers had been interviewed to find out return, structure of costs and profitability level. This is an opportunity to make comparison between products and countries. This is also information for decision makers for subsidizing policies. The production costs and the net profit of dried fig was found to be US $ 1,428/hectar and US $ 372/hectar, respectively. Dried fig production was found more profitable comparing with some other dried fruits. Dried fig producers spend a unit of money and earn 1.25 unit of money. Profitability of dried fig was found to be 125%. This is an indicator for the farmers willing to produce dried fig in their convenient conditions.

  8. Properties of dry masonry mixtures based on hollow aluminosilicate microspheres

    Directory of Open Access Journals (Sweden)

    Semenov Vyacheslav

    2017-01-01

    Full Text Available At present, there is a steady increase in the volume of housing construction in the Russian Federation. The modern trends in the field of energy and resource saving determine the need of the use of efficient building materials that ensure the safety, comfort and minimum cost of housing construction. Among the materials, often used for erecting of fencing structures, it is possible to note effective small-piece elements (ceramic and light-weight concrete units, etc.. To ensure the solidity of such structures, it is necessary to use the masonry mortars whose properties correspond to those of the main wall material. The existing dry mixes for obtaining of such mortars are expensive and often do not meet the minimum physical-and-mechanical and exploitation requirements. The solution of this problem is the usage of the hollow ceramics (aluminosilicate microspheres as a filler for such mixes. The article presents the results of studies of the main physical-and-mechanical and exploitation characteristics of dry masonry mixes with hollow ceramics microspheres modified with various chemical additives. The effect of the compounding factors on the average density and strength of dry masonry mixes was studied. The compositions have been optimized by the methods of mathematical planning.

  9. Energy Efficient Textile Drying

    OpenAIRE

    Brunzell, Lena

    2006-01-01

    Traditionally, textiles were dried outdoors with the wind and the sun enhancing the drying process. Tumble dryers offer a fast and convenient way of drying textiles independent of weather conditions. Tumble dryers, however, consume large amounts of electrical energy. Over 4 million tumble dryers are sold each year in Europe and a considerable amount of energy is used for drying of clothes. Increasing energy costs and the awareness about environmental problems related to a large energy use has...

  10. Bioimpedance analysis on evaluating fluid distribution and adjusting dry weight in patients of maintenance hemodialysis%生物电阻抗法评估维持性血透患者的体液分布及其在调整干体重中的作用

    Institute of Scientific and Technical Information of China (English)

    曲晨; 程丽静; 刘春艳

    2013-01-01

    Objective To evaluate fluid distribution in patients on maintenance hemodialysis (HD) by bioimpedance analysis and on the effect of adjusting the dry weight in hemodialysis patients.Methods Forty maintenance HD patients from the dialysis center of the Second Affiliated Hospital of Dalian Medical University were enrolled as study group.One hundred and two individuals who were tested of physical examination in the same hospital were enrolled as the control group.Sex and age of the two groups were recorded.Body weight,body high,blood pressure,bioimpedance of HD patients (pre-dialysis and post-dialysis) and controls were measured.Bioimpedance was measured by multifrequency segmental bioimpedance analysis,including right arm (RA) bioimpedance,trunk (TR) bioimpedance and right leg (RL) bioimpedance.Bioimpedance ratio (BIR) of three parts was calculated as of 100kHz and 20kHz including RA-BIR,TR-BIR and RL-BIR.Then eight HD patients who had high RA-BIA or TR-BIA according to the reference range which were obtained from 102 controls were chosen for dry weight adjustment.Post-dialysis body weight,blood pressure,and bioimpedance of the eight HD patients were measured again after adjusting the dry weight.Results (1) BIR of three parts in pre-dialysis HD patients were all significantly higher than that in the control group (P < 0.05).BIR of three parts of the post-dialysis HD patients were still higher than that of the control group,but RL-BIR was not significantly (P > 0.05).BIR of three parts of the post-dialysis HD patients were lower than BIR of three parts of the pre-dialysis HD patients,and there was significant different (P < 0.05) with RA-BIR and RL-BIR.(2) After adjusting the dry weight,BIR of three parts of the post-dialysis HID patients were still higher than that of the control group,but none of them was significantly (P >0.05).BIR of three parts of the HD patients after adjusting the dry weight were lower than BIR of three parts of the HD patients before

  11. DRYING OF EMPTY FRUIT BUNCHES AS WASTED BIOMASS BY HYBRID SOLAR–THERMAL DRYING TECHNIQUE

    Directory of Open Access Journals (Sweden)

    H. H. Al-Kayiem

    2013-12-01

    Full Text Available Solar drying of EFB is highly feasible and economic, but the solar drying process is interrupted during cloudy or rainy days and also at night. In the present paper, a combined solar, as the main heat input, and biomass burner, as an auxiliary source of thermal energy, has been investigated experimentally to dry EFB. An experimental model consisting of a solar dryer integrated with a thermal backup unit was designed and fabricated. A series of experimental measurements were carried out in four different drying modes, namely, open sun, mixed direct and indirect solar, thermal backup, and hybrid. The results from the four modes used to dry 2.5 kg of EFB were summarized and compared. The results indicated that the solar drying mode required around 52 to 80 hours to dry the EFB, while the open sun drying mode required 100 hours. Usage of the thermal backup as heat source reduced the drying time to 48–56 hours. With the hybrid mode, the drying time was considerably reduced to 24–32 hours. The results demonstrate that the combined solar and thermal backup effectively enhanced the drying performance. The application of a solar dryer with a biomass burner is practical for massive production of solid fuels from EFB.

  12. International shipment of light weight radioisotopic heater units (LWRHU) using the USA/9516/B(U)F Mound 1 kW shipping package in support of the ``Pluto Express'' mission

    Science.gov (United States)

    Barklay, Chadwick D.; Merten, C. William

    1997-01-01

    Radioisotopes have provided heat that has been used to maintain specific operating environments within remote satellites and spacecraft. For the ``Pluto Express'' mission the 238PuO2 fueled light weight radioisotopic heater unit (LWRHU) will be used within the spacecraft. Since the current plan for the ``Pluto Express'' mission incorporates the use of a Russian launch platform for the spacecraft, the LWRHUs must be transported in an internationally certified shipping container. An internationally certified shipping package that is versatile enough to be reconfigured to transport the LWRHUs that will be required to support the ``Pluto Express'' mission is the Mound USA/9516/B(U)F.

  13. Dry vacuum pumps

    Science.gov (United States)

    Sibuet, R.

    2008-05-01

    For decades and for ultimate pressure below 1 mbar, oil-sealed Rotary Vane Pumps have been the most popular solution for a wide range of vacuum applications. In the late 80ies, Semiconductor Industry has initiated the development of the first dry roughing pumps. Today SC applications are only using dry pumps and dry pumping packages. Since that time, pumps manufacturers have developed dry vacuum pumps technologies in order to make them attractive for other applications. The trend to replace lubricated pumps by dry pumps is now spreading over many other market segments. For the Semiconductor Industry, it has been quite easy to understand the benefits of dry pumps, in terms of Cost of Ownership, process contamination and up-time. In this paper, Technology of Dry pumps, its application in R&D/industries, merits over conventional pumps and future growth scope will be discussed.

  14. Quantitative and qualitative evaluation of brain diffusion weighted magnetic resonance imaging comparison with 1.5 T and 3.0 T units

    Energy Technology Data Exchange (ETDEWEB)

    Goo, Eun Hoe [Dept. of Radiological Science, Cheongju University, Cheongju (Korea, Republic of); Dong, Kyung Rae [Dept. of Radiological Technology, Gwangju Health University, Gwangju (Korea, Republic of)

    2017-02-15

    DWI of biological effects are independent of magnetic field strength in various regions. High field strength, however, does affect the signal to noise ratio (SNR) and artifacts of diffusion weighted imaging (DWI) images, which ultimately will influence the quantitative of diffusion imaging . In this study, the effects of field strength on DWI are reviewed. The effects of the diseases also are discussed. Comparing DWI in cerebellum, WM, GM, Hyperacute region measurements both as a function of field strength (1.5 T and 3.0 T). Overall, the SNR of the DWI roughly doubled going from 1.5 T to 3.0 T. In summary, DWI studies at 3.0 T is provided significantly improved DWI measurements relative to studies at 1.5 T.

  15. Quality properties of fruits as affected by drying operation.

    Science.gov (United States)

    Omolola, Adewale O; Jideani, Afam I O; Kapila, Patrick F

    2017-01-02

    The increasing consumption of dried fruits requires further attention on the quality parameters. Drying has become necessary because most fruits are highly perishable owing to their high moisture content and the need to make them available all year round and at locations where they are not produced. In addition to preservation, the reduced weight and bulk of dehydrated products decreases packaging, handling and transportation costs. Quality changes associated with drying of fruit products include physical, sensory, nutritional, and microbiological. Drying gives rise to low or moderate glycemic index (GI) products with high calorie, vitamin and mineral contents. This review examines the nutritional benefits of dried fruits, protective compounds present in dried fruits, GI, overview of some fruit drying methods and effects of drying operations on the quality properties such as shrinkage, porosity, texture, color, rehydration, effective moisture diffusivity, nutritional, sensory, microbiological and shelf stability of fruits.

  16. 小型超高压设备创新设计与应用%Weight reduction and miniaturization of ultra-high pressure unit

    Institute of Scientific and Technical Information of China (English)

    贾培起

    2011-01-01

    小型超高压设备的轻量化和小型化,不仅关系到设备的材料消耗和产品成本,而且关系到用户的方便性及其推广应用.本文介绍了小型超高压食品加工设备(10 L以下)的结构创新设计,应用有限元分析优化设备结构,在参数优化、材料处理等方面提出改进技术措施,研制出专利技术产品,并且提出规模化生产和产业化的具体方案.%The small quantification and miniaturization of small-size ultra-high pressure unit is not only concerned with the expenditure of materials of the equipment and cost of the products but also with the convenience of the users and its diffusion and application. This paper deals with the technological measures and related patent technologies which involves the design of the structure, finite element analysis, optimization of the parameter, the treatment of the materials of the small-size ultra-high pressure unit (under 10 litres). At the same time, some concrete projects of its mass and large scale production and industrialization are also put forward.

  17. Unit Root Test with the Weighted Symmetric Estimator for the Seasonal Time Series%利用加权对称估计量对季节性时间序列的单位根检验

    Institute of Scientific and Technical Information of China (English)

    金兰; 朴宪镇

    2001-01-01

    In this thesis, we propose test statistics based on the weighted symmetric estimators for seasonal time series autoregressive models with a unit root and derive representations for the limit distributions of the estimators and pivotal statistics. The empirical percentiles of the distributions for time series that has a unit root at the seasonal lag are computed for finite samples and limit case by Monte Carlo method. By comparison of the empirical powers, we show that the test statistics with the weighted symmetric estimators are more powerful than that with the ordinary least squares estimators and simple symmetric estimators for the seasonal means model.%本文提出对季节性时间序列利用加权对称估计量的单位根检验,导出相应统计量的极限分布.用MonteCarlo方法计算经验百分位数及检验势,并对最小平方估计量,简单对称估计量和加权对称估计量的经验检验势作了比较.

  18. Study on quantitative relation between characteristics of striature bionic coupling unit and wear resistance of gray cast iron

    Science.gov (United States)

    Pang, Zuobo; Zhou, Hong; Zhang, Peng; Cong, Dalong; Meng, Chao; Wang, Chuanwei; Ren, Luquan

    2015-03-01

    In order to improve the wear resistance of gray cast iron guide rail, striature bionic coupling units of different characteristics were manufactured by laser surface remelting. Wear behavior of gray cast iron with striature bionic coupling units has been studied under dry sliding condition at room temperature using a homemade linear reciprocating wear testing machine. The wear resistance was evaluated by means of weight loss measurement and wear morphology. The results indicated that there is a relationship between weight loss and the area of striature bionic coupling units and α: Δm = Δm0 - 0.0212S × cos α - 0.0241S × sin α.

  19. Evaluation of small ({<=}2 cm) dysplastic nodules and well-differentiated hepatocellular carcinomas with ferucarbotran-enhanced MRI in a 1.0-T MRI unit: Utility of T2*-weighted gradient echo sequences with an intermediate-echo time

    Energy Technology Data Exchange (ETDEWEB)

    Tonan, Tatsuyuki [Department of Radiology, Kurume University School of Medicine, 67 Asahi-machi, Kurume 830-0011 (Japan); Fujimoto, Kiminori [Department of Radiology, Kurume University School of Medicine, 67 Asahi-machi, Kurume 830-0011 (Japan)], E-mail: kimichan@med.kurume-u.ac.jp; Azuma, Sanae [Department of Radiology, Kurume University School of Medicine, 67 Asahi-machi, Kurume 830-0011 (Japan); Ono, Noriyuki [Department of Internal Medicine, Chikugo City Hospital, Chikugo (Japan); Matsushita, Sunao [Department of Radiology, Chikugo City Hospital, 917-1 Izumi, Chikugo 833-0041 (Japan); Kojiro, Masamichi [Department of Pathology, Kurume University School of Medicine, Kurume (Japan); Hayabuchi, Naofumi [Department of Radiology, Kurume University School of Medicine, 67 Asahi-machi, Kurume 830-0011 (Japan)

    2007-10-15

    Purpose: To evaluate the detectability and signal intensities of small ({<=}2 cm) dysplastic nodules (DNs) and well-differentiated hepatocellular carcinomas (w-HCCs) by T2*-weighted gradient echo (GRE) sequences using an intermediate echo-time (TE) with ferucarbotran in a 1.0-T magnetic resonance imaging (MRI) unit. Materials and methods: Pathologically confirmed DNs (n = 13) and w-HCCs (n = 31) with a median largest dimension of 1.1 cm were scanned using ferucarbotran-enhanced MRI. Conventional T2*-weighted GRE sequences (conventional-T2*-GRE: repetition time, 280 ms; echo time, 14 ms; flip angle, 60 deg.) and specific T2*-weighted GRE sequences using an intermediate-TE (specific-T2*-GRE: repetition time, 140 ms; echo time, 8 ms; flip angle, 30 deg.) were obtained before and after ferucarbotran administration. Two independent observers scored all nodules for visibility and assigned confidence level scores to their observations. To assess the effect of ferucarbotran, the tumor-liver signal contrast-to-noise ratio (tumor-liver-CNR) was also calculated for detected nodules by the same two observers with consensus. Results: There was good interobserver agreement regarding the presence of nodules for both sequence types. Qualitative and quantitative analyses indicated that specific-T2*GRE sequences were superior to conventional-T2*-GRE sequences for detecting DNs and w-HCCs with hypointense signals. The tumor-liver-CNR of DNs was significantly different between specific-T2*-GRE sequences and conventional-T2*-GRE sequences (Mann-Whitney test, P < 0.001). Both qualitative and quantitative analyses indicated that conventional-T2*-GRE sequences were superior to specific-T2*-GRE sequences for detecting w-HCCs with heterogeneous and hyperintense signals. Conclusion: Specific-T2*-GRE sequences with ferucarbotran are useful for detecting DNs and w-HCCs that produce hypointense signals on a 1.0-T MRI unit.

  20. Drying and energy technologies

    CERN Document Server

    Lima, A

    2016-01-01

    This book provides a comprehensive overview of essential topics related to conventional and advanced drying and energy technologies, especially motivated by increased industry and academic interest. The main topics discussed are: theory and applications of drying, emerging topics in drying technology, innovations and trends in drying, thermo-hydro-chemical-mechanical behaviors of porous materials in drying, and drying equipment and energy. Since the topics covered are inter- and multi-disciplinary, the book offers an excellent source of information for engineers, energy specialists, scientists, researchers, graduate students, and leaders of industrial companies. This book is divided into several chapters focusing on the engineering, science and technology applied in essential industrial processes used for raw materials and products.

  1. Ambient Dried Aerogels

    Science.gov (United States)

    Jones, Steven M.; Paik, Jong-Ah

    2013-01-01

    A method has been developed for creating aerogel using normal pressure and ambient temperatures. All spacecraft, satellites, and landers require the use of thermal insulation due to the extreme environments encountered in space and on extraterrestrial bodies. Ambient dried aerogels introduce the possibility of using aerogel as thermal insulation in a wide variety of instances where supercritically dried aerogels cannot be used. More specifically, thermoelectric devices can use ambient dried aerogel, where the advantages are in situ production using the cast-in ability of an aerogel. Previously, aerogels required supercritical conditions (high temperature and high pressure) to be dried. Ambient dried aerogels can be dried at room temperature and pressure. This allows many materials, such as plastics and certain metal alloys that cannot survive supercritical conditions, to be directly immersed in liquid aerogel precursor and then encapsulated in the final, dried aerogel. Additionally, the metalized Mylar films that could not survive the previous methods of making aerogels can survive the ambient drying technique, thus making multilayer insulation (MLI) materials possible. This results in lighter insulation material as well. Because this innovation does not require high-temperature or high-pressure drying, ambient dried aerogels are much less expensive to produce. The equipment needed to conduct supercritical drying costs many tens of thousands of dollars, and has associated running expenses for power, pressurized gasses, and maintenance. The ambient drying process also expands the size of the pieces of aerogel that can be made because a high-temperature, high-pressure system typically has internal dimensions of up to 30 cm in diameter and 60 cm in height. In the case of this innovation, the only limitation on the size of the aerogels produced would be in the ability of the solvent in the wet gel to escape from the gel network.

  2. Ocean Dynamics: Vietnam DRI

    Science.gov (United States)

    2014-09-30

    Dynamics: Vietnam DRI Robert Pinkel Marine Physical Laboratory Scripps Institution of Oceanography La Jolla California 92093-0213 Phone: (858) 534...DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE Ocean Dynamics: Vietnam DRI 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...cycle.. The Thorpe-scale estimates are local to Site III. South China Sea Process Cruise 2014 Under Vietnam DRI funding, Researcher Drew Lucas

  3. Social contagions on weighted networks

    Science.gov (United States)

    Zhu, Yu-Xiao; Wang, Wei; Tang, Ming; Ahn, Yong-Yeol

    2017-07-01

    We investigate critical behaviors of a social contagion model on weighted networks. An edge-weight compartmental approach is applied to analyze the weighted social contagion on strongly heterogenous networks with skewed degree and weight distributions. We find that degree heterogeneity cannot only alter the nature of contagion transition from discontinuous to continuous but also can enhance or hamper the size of adoption, depending on the unit transmission probability. We also show that the heterogeneity of weight distribution always hinders social contagions, and does not alter the transition type.

  4. Social contagions on weighted networks

    CERN Document Server

    Zhu, Yu-Xiao; Tang, Ming; Ahn, Yong-Yeol

    2016-01-01

    We investigate critical behaviors of a social contagion model on weighted networks. An edge-weight compartmental approach is applied to analyze the weighted social contagion on strongly heterogenous networks with skewed degree and weight distributions. We find that degree heterogeneity can not only alter the nature of contagion transition from discontinuous to continuous but also can enhance or hamper the size of adoption, depending on the unit transmission probability. We also show that, the heterogeneity of weight distribution always hinder social contagions, and does not alter the transition type.

  5. Weight lifting

    Energy Technology Data Exchange (ETDEWEB)

    Drysdale, G.S.; Murphy, J.C. [CSL Asia (Singapore)

    2006-03-15

    The paper considers the advantages of using self-unloaders (SULs) for transporting and handling major dry bulk commodities such as coal. Advantages include speed, discharge flexiblity, efficiency, ability to blend coals on the vessel, cost effectiveness, and noise and dust control features. A case study outlines how CSL helped design a coal receiving terminal for the AES Corp. in Puerto Rico which was an SUL terminal with a state-of-the-art dust suppression system. 2 photos.

  6. Dry etching for microelectronics

    CERN Document Server

    Powell, RA

    1984-01-01

    This volume collects together for the first time a series of in-depth, critical reviews of important topics in dry etching, such as dry processing of III-V compound semiconductors, dry etching of refractory metal silicides and dry etching aluminium and aluminium alloys. This topical format provides the reader with more specialised information and references than found in a general review article. In addition, it presents a broad perspective which would otherwise have to be gained by reading a large number of individual research papers. An additional important and unique feature of this book

  7. Effect of mature body weight and stocking rate on cow and calf performance, cow herd efficiency, and economics in the southeastern United States.

    Science.gov (United States)

    Beck, P A; Stewart, C B; Gadberry, M S; Haque, M; Biermacher, J

    2016-04-01

    Eight 4-ha mixed warm-season grass pastures in southwestern Arkansas (33°40'4″ N, 93°35'24″ W, and elevation 107 m) were stocked with either large mature size (571 kg [SD 55.2] BW) or small mature size (463 kg [SD 58.2] BW) spring-calving cows at 4 stocking rates (SR; 1, 1.5, 2, or 2.5 cow-calf pairs/ha) over 4 yr to test the effects of SR and mature body size on cow and calf performance and system economics. Each pasture received 112 kg/ha N as ammonium nitrate in May and was broadcast seeded to annual ryegrass ( Lam.) in mid October each fall along with 112 kg/ha N as ammonium nitrate. Data were analyzed by regression to determine the effects of cow size and SR on calf performance, cow BW change, calf gain, weaning weight per hectare, hay feeding requirements, and net returns. As SR increased, cow BW and BCS at weaning decreased ( Calf BW at weaning in October increased ( calf BW at weaning per 100 kg cow BW decreased ( Calf BW weaned per hectare was not affected ( = 0.75) by cow BW but linearly increased ( feeding days and cost of hay per cow increased ( ≤ 0.05) and kilograms of hay offered per cow tended ( = 0.09) to linearly increase with increasing SR, yet cow BW had no effects ( > 0.22). Although there were no effects ( ≥ 0.38) of cow BW on carrying cost or net returns, increasing SR decreased ( feeding of conserved forages but did not affect pregnancy rates and led to increases in total calf BW weaned per hectare and net returns.

  8. Cryopreservation of spin-dried mammalian cells.

    Directory of Open Access Journals (Sweden)

    Nilay Chakraborty

    Full Text Available This study reports an alternative approach to achieve vitrification where cells are pre-desiccated prior to cooling to cryogenic temperatures for storage. Chinese Hamster Ovary (CHO cells suspended in a trehalose solution were rapidly and uniformly desiccated to a low moisture content (<0.12 g of water per g of dry weight using a spin-drying technique. Trehalose was also introduced into the cells using a high-capacity trehalose transporter (TRET1. Fourier Transform Infrared Spectroscopy (FTIR was used to examine the uniformity of water concentration distribution in the spin-dried samples. 62% of the cells were shown to survive spin-drying in the presence of trehalose following immediate rehydration. The spin-dried samples were stored in liquid nitrogen (LN(2 at a vitrified state. It was shown that following re-warming to room temperature and re-hydration with a fully complemented cell culture medium, 51% of the spin-dried and vitrified cells survived and demonstrated normal growth characteristics. Spin-drying is a novel strategy that can be used to improve cryopreservation outcome by promoting rapid vitrification.

  9. Physical properties of sunflower grains after drying

    Directory of Open Access Journals (Sweden)

    Paulo Carteri Coradi

    2015-12-01

    Full Text Available The knowledge of the physical properties of the grains is important for the optimization of post-harvest operations. This study aimed to evaluate the effects of convective drying with different air temperatures (45, 55, 65 and 75 °C the physical properties of sunflower seeds. The drying sunflower grains was performed in convection oven with forced air. In natural conditions, samples of 5 kg of pellets were used for each repetition drying. During the drying process, the grains samples were weighed periodically until they reach 10% (wet basis, w.b., then were subjected to evaluations of physical properties. According to the results it was observed that the porosity, apparent density, thousand kernel weight to the drag coefficient, roundness, sphericity and width of sunflower seed did not change with increasing temperature drying air. It was concluded that the drying air temperatures of 45 °C and 55 retained the initial physical characteristics of sunflower seeds. The temperature of the drying air of 75 °C had greater influence on changes in volumetric shrinkage of the grains.

  10. The study of some physical properties and energy aspects of potatoes drying process by the infrared-vacuum method

    Directory of Open Access Journals (Sweden)

    N Hafezi

    2016-09-01

    laboratory scale vacuum-infrared dryer, developed at the Agricultural Machinery and Mechanization Engineering Laboratory of Shahid Chamran University of Ahvaz has been used. The dryer consists of a stainless steel drying chamber; a laboratory type piston vacuum pump, which was used to maintain vacuum in the drying chamber; an infrared lamp with power of 250 W which was used to supply thermal radiation to a drying product; and a control system for the infrared radiator. Sample Preparation Fresh potatoes were purchased from a local market in Hamadan province. Potatoes were peeled, washed, and cut into sliced with thickness of 1, 2 and 3 mm by a manual slicer. Drying experiments of potato slices were performed in a vacuum chamber with absolute pressure levels of 20, 80, 140 and 760 mmHg; and radiation intensity of infrared lamp was 0.2, 0.3 and 0.4 W cm-2. The mass change of the sample during drying was detected continuously using an electronic weight scale (Lutron, GM- 1500P, Taiwan with the accuracy of ±0.05 g. Evaluation of rehydration capacity of dried potato slices The rehydration tests measured the gain in weight of dehydrated samples (~5 g, dehydrated samples were rehydrated in 200 cc of distilled water at 100°C for 3 minutes. Evaluation of color The color of potatoes was measured on five slices selected randomly, and was described by three coordinates in the RGB color space using computer vision. Evaluation of specific energy consumption Energy consumption of dying process came from the electrical energy consumed by the operation of the vacuum pump and the infrared lamp. Specific energy consumption was defined as the energy required for removing a unit mass of water in drying the potato slice. Evaluation of thermal utilization efficiency Thermal utilization efficiency is defined as the latent heat of vaporization of moisture of sample to the amount of energy required to evaporate moisture from free water. The latent heat of vaporization of water at the evaporating

  11. The study of some physical properties and energy aspects of potatoes drying process by the infrared-vacuum method

    Directory of Open Access Journals (Sweden)

    N Hafezi

    2016-09-01

    laboratory scale vacuum-infrared dryer, developed at the Agricultural Machinery and Mechanization Engineering Laboratory of Shahid Chamran University of Ahvaz has been used. The dryer consists of a stainless steel drying chamber; a laboratory type piston vacuum pump, which was used to maintain vacuum in the drying chamber; an infrared lamp with power of 250 W which was used to supply thermal radiation to a drying product; and a control system for the infrared radiator. Sample Preparation Fresh potatoes were purchased from a local market in Hamadan province. Potatoes were peeled, washed, and cut into sliced with thickness of 1, 2 and 3 mm by a manual slicer. Drying experiments of potato slices were performed in a vacuum chamber with absolute pressure levels of 20, 80, 140 and 760 mmHg; and radiation intensity of infrared lamp was 0.2, 0.3 and 0.4 W cm-2. The mass change of the sample during drying was detected continuously using an electronic weight scale (Lutron, GM- 1500P, Taiwan with the accuracy of ±0.05 g. Evaluation of rehydration capacity of dried potato slices The rehydration tests measured the gain in weight of dehydrated samples (~5 g, dehydrated samples were rehydrated in 200 cc of distilled water at 100°C for 3 minutes. Evaluation of color The color of potatoes was measured on five slices selected randomly, and was described by three coordinates in the RGB color space using computer vision. Evaluation of specific energy consumption Energy consumption of dying process came from the electrical energy consumed by the operation of the vacuum pump and the infrared lamp. Specific energy consumption was defined as the energy required for removing a unit mass of water in drying the potato slice. Evaluation of thermal utilization efficiency Thermal utilization efficiency is defined as the latent heat of vaporization of moisture of sample to the amount of energy required to evaporate moisture from free water. The latent heat of vaporization of water at the evaporating

  12. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / Eye Health A-Z Dry Eye ... Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué Es el Ojo Seco? Written By: Kierstan ...

  13. High-intensity drying processes: Impulse drying. Progress report on furnish evaluations for impulse drying commercialization demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Orloff, D.I.; Phelan, P.M.; Rudman, I.

    1995-02-01

    Laboratory and pilot scale experiments were performed to identify potential furnishes and operating parameters for upcoming high-speed pilot scale trials and commercial demonstration of impulse drying of heavy weight grades of paper. Results indicate that hydrodynamic specific surface is highly dependent on sheet formation and prehandling. Mill refined pulp and machine paper were comparable to laboratory prepared samples in regards to permeability and impulse drying. Process variables such as platen surface coating, felt type, felt moisture, and presteaming temperature profiles were investigated. Substantial improvements in sheet smoothness were achieved.

  14. International shipment of light weight radioisotopic heater units (LWRHU) using the USA/9516/B(U)F Mound 1 kW shipping package in support of the {open_quotes}Pluto Express{close_quotes} mission

    Energy Technology Data Exchange (ETDEWEB)

    Barklay, C.D. [EGG Mound Applied Technologies P.O. Box 3000 Miamisburg, Ohio45343-3000 (United States); Merten, C.W. [Mound Engineering and Analysis Group, Inc. 720 Mound Road COS Building 4222 Miamisburg, Ohio45342 (United States)

    1997-01-01

    Radioisotopes have provided heat that has been used to maintain specific operating environments within remote satellites and spacecraft. For the {open_quotes}Pluto Express{close_quotes} mission the {sup 238}PuO{sub 2} fueled light weight radioisotopic heater unit (LWRHU) will be used within the spacecraft. Since the current plan for the {open_quotes}Pluto Express{close_quotes} mission incorporates the use of a Russian launch platform for the spacecraft, the LWRHUs must be transported in an internationally certified shipping container. An internationally certified shipping package that is versatile enough to be reconfigured to transport the LWRHUs that will be required to support the {open_quotes}Pluto Express{close_quotes} mission is the Mound USA/9516/B(U)F. {copyright} {ital 1997 American Institute of Physics.}

  15. Weighted approximation with varying weight

    CERN Document Server

    Totik, Vilmos

    1994-01-01

    A new construction is given for approximating a logarithmic potential by a discrete one. This yields a new approach to approximation with weighted polynomials of the form w"n"(" "= uppercase)P"n"(" "= uppercase). The new technique settles several open problems, and it leads to a simple proof for the strong asymptotics on some L p(uppercase) extremal problems on the real line with exponential weights, which, for the case p=2, are equivalent to power- type asymptotics for the leading coefficients of the corresponding orthogonal polynomials. The method is also modified toyield (in a sense) uniformly good approximation on the whole support. This allows one to deduce strong asymptotics in some L p(uppercase) extremal problems with varying weights. Applications are given, relating to fast decreasing polynomials, asymptotic behavior of orthogonal polynomials and multipoint Pade approximation. The approach is potential-theoretic, but the text is self-contained.

  16. DRY DEPOSITION OF POLLUTANTS TO FORESTS

    Science.gov (United States)

    We report on the results of an extensive field campaign to measure dry deposition of ozone and sulfur dioxide to a sample of forest types in the United States. Measurements were made for full growing seasons over a deciduous forest in Pennsylvania and a mixed deciduous-conifer...

  17. Comparison of Four Methods for Weighting Multiple Predictors.

    Science.gov (United States)

    Aamodt, Michael G.; Kimbrough, Wilson W.

    1985-01-01

    Four methods were used to weight predictors associated with a Resident Assistant job: (1) rank order weights; (2) unit weights; (3) critical incident weights; and (4) regression weights. A cross-validation was also done. Most weighting methods were highly related. No method was superior in terms of protection from validity shrinkage. (GDC)

  18. Stripping with dry ice

    Science.gov (United States)

    Malavallon, Olivier

    1995-04-01

    Mechanical-type stripping using dry ice (solid CO2) consists in blasting particles of dry ice onto the painted surface. This surface can be used alone or in duplex according to type of substrate to be treated. According to operating conditions, three physical mechanisms may be involved when blasting dry ice particles onto a paint system: thermal shock, differential thermal contraction, and mechanical shock. The blast nozzle, nozzle travel speed, blast angle, stripping distance, and compressed air pressure and media flow rate influence the stripping quality and the uniformity and efficiency obtained.

  19. Toeplitz Operators with L1 Symbols on Weighted Bergman Spaces of the Unit Ball%单位球的加权Bergman空间上具有L1符号的Toeplitz算子

    Institute of Scientific and Technical Information of China (English)

    何莉; 曹广福; 何忠华

    2013-01-01

    讨论了单位球的加权Bergman空间Aρ(Bn,dVα)(1<p<∞)上具有L1(Bn)符号的Toeplitz算子,利用单位球上Toeplitz算子的Berezin变换,等价刻画了Apα(Bn,dVα)上具有L1(Bn)符号的Toeplitz算子的有界性和紧性,推广了Agbor对L2a(D,dA)上具有L1(D)符号的Toeplitz算子的有界性和紧性等价刻画的结论.%We investigate the boundedness and compactness of Toeplitz operators with L1 symbols on weighted Bergman spaces of the unit ball Apα(Bn,dVα) (1 < p < ∞). We describe the boundedness and compactness of Toeplitz operators with L1 symbols on Apα(Bn,dVα) equivalently by using the Berezin transform of the Toeplitz operators, and promote the conclusion given by Agbor about the boundedness and compactness of Toeplitz operators with L1 symbols on Bergman space of the unit disk L2a(D).

  20. Dry body weight: Water and sodium removal targets in PD

    NARCIS (Netherlands)

    R.T. Krediet

    2006-01-01

    Background/Aims: Cardiovascular mortality is high in peritoneal dialysis patients. This may be due to the presence of hypertension and fluid overload. Dietary intake of water and sodium are likely to be important, especially in anuric patients. Methods: A review of the literature on assessment of fl

  1. Changes in micronutrients, dry weight and plant growth of soybean ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-06-03

    ., 1981) and increasing ion ... competitive interactions or by affecting the ion selectivity ..... contents wheat and rice varieties under salt stress. Turk. J. Agric. .... different organs of green bean genotypes grown under salt stress.

  2. [Little Dry Creek Drainage

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Map of the drainage boundary, direction of flow, canals and ditches, and streets for the drainage study plan and profile for Little Dry Creek sub area in the North...

  3. What Is Dry Eye?

    Medline Plus

    Full Text Available ... information about eye health and preserving your vision. Privacy Policy Related New Dry Eye Treatment is a ... the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For Advertisers For Media ...

  4. Cold Vacuum Drying Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Located near the K-Basins (see K-Basins link) in Hanford's 100 Area is a facility called the Cold Vacuum Drying Facility (CVDF).Between 2000 and 2004, workers at the...

  5. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Pediatric Ophthalmology Education Center Oculofacial Plastic Surgery Center Laser Surgery Education Center Redmond Ethics Center Global Ophthalmology Guide Eye ... What Is Dry Eye? Leer en Español: ¿Qué ...

  6. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Dry Eye Symptoms Related Ask an Ophthalmologist Answers Can a six-month dissolvable punctal plug be removed ... insert a permanent punctal plug? Sep 12, 2017 Can you explain why I have halos and blurry ...

  7. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Pediatric Ophthalmology Education Center Oculofacial Plastic Surgery Center Laser Surgery Education Center Redmond Ethics Center Global Ophthalmology Guide ... What Is Dry Eye? Written By: Kierstan Boyd ...

  8. What Is Dry Eye?

    Medline Plus

    Full Text Available ... about eye health and preserving your vision. Privacy Policy Related New Dry Eye Treatment is a Tear- ... Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For Advertisers For Media Ophthalmology ...

  9. Technological Transformation of Dry-type Slag Removal System of 1 000 MW Ultra-Supercritical Units Boilers%超超临界机组锅炉干渣机的技术改造

    Institute of Scientific and Technical Information of China (English)

    陈恒中

    2014-01-01

    Taking technological transformation of dry-type slag removal system of 1 000 MW ultra-supercriti-cal boilers in a power plant as an example, the paper analyzes and solves problem of ash deposits in the slope at the bottom of dry-type slag removal system in the first level, providing reference for design and tech-nical transformation of the same projects.%以某发电厂超超临界锅炉干渣机技术改造为例,分析并解决了一级干渣机底部斜坡段积灰的问题,为同类工程的设计及技术改造提供参考。

  10. Electro-dry-adhesion.

    Science.gov (United States)

    Krahn, Jeffrey; Menon, Carlo

    2012-03-27

    This work presents novel conductive bioinspired dry adhesives with mushroom caps that enable the use of a synergistic combination of electrostatic and van der Waals forces (electro-dry-adhesion). An increase in shear adhesion bond strength of up to 2046% on a wide range of materials is measured when a maximum electrical field of 36.4 V μm(-1) is applied. A suction effect, due to the shape of the dry adhesive fibers, on overall adhesion was not noted for electro-dry-adhesives when testing was performed at both atmospheric and reduced pressure. Utilization of electrostatics to apply a preloading force to dry adhesive fiber arrays allows increased adhesion even after electrostatic force generation has been halted by ensuring the close contact necessary for van der Waals forces to be effective. A comparison is made between self-preloading of the electro-dry-adhesives and the direct application of a normal preloading pressure resulting in nearly the same shear bond strength with an applied voltage of 3.33 kV on the same sample.

  11. Bioavailability and Digestibility of Nutrients from the Dried Oyster Culinary-Medicinal Mushroom, Pleurotus ostreatus (Agaricomycetes): In Vivo Experiments.

    Science.gov (United States)

    Regula, Julita; Suliburska, Joanna; Siwulski, Marek

    2016-01-01

    There is a limited number of publications on the bioavailability and digestibility of nutrients contained in macrofungi. The aim of this study was to assess the bioavailability and digestibility of macronutrients using in vivo experiments on laboratory animals. The experiments were conducted with the commercial oyster mushroom Pleurotus ostreatus. Semisynthetic diets were prepared based on the modified AIN-93M diet and were supplemented with 4% and 8% mushroom powder. Between days 4 and 13, apparent digestibility indexes were determined for all animals using the conventional balance method. The hematological indexes-that is, hemoglobin, hematocrit, red blood cells, white blood cells, mean corpuscular volume, mean corpuscular hemoglobin, and mean corpuscular hemoglobin concentration-were determined using a Sysmex K-1000 hematological analyzer. Feeding rats with semisynthetic diets supplemented with dried oyster mushroom had no negative effect on body weight gain or feeding efficiency, expressed in the amount of body weight gain per unit of metabolic energy uptake. Introduction of dried oyster mushroom to the diet resulted in reduced digestibility of the diet and the protein and fat it contained, as well as decreased apparent energy availability. These changes were dependent on the volume of dried mushroom added to the semisynthetic diet. The addition of dried oyster mushroom to the semisynthetic diet considerably reduced passage time through the alimentary tract of rats.

  12. Weight Loss Nutritional Supplements

    Science.gov (United States)

    Eckerson, Joan M.

    Obesity has reached what may be considered epidemic proportions in the United States, not only for adults but for children. Because of the medical implications and health care costs associated with obesity, as well as the negative social and psychological impacts, many individuals turn to nonprescription nutritional weight loss supplements hoping for a quick fix, and the weight loss industry has responded by offering a variety of products that generates billions of dollars each year in sales. Most nutritional weight loss supplements are purported to work by increasing energy expenditure, modulating carbohydrate or fat metabolism, increasing satiety, inducing diuresis, or blocking fat absorption. To review the literally hundreds of nutritional weight loss supplements available on the market today is well beyond the scope of this chapter. Therefore, several of the most commonly used supplements were selected for critical review, and practical recommendations are provided based on the findings of well controlled, randomized clinical trials that examined their efficacy. In most cases, the nutritional supplements reviewed either elicited no meaningful effect or resulted in changes in body weight and composition that are similar to what occurs through a restricted diet and exercise program. Although there is some evidence to suggest that herbal forms of ephedrine, such as ma huang, combined with caffeine or caffeine and aspirin (i.e., ECA stack) is effective for inducing moderate weight loss in overweight adults, because of the recent ban on ephedra manufacturers must now use ephedra-free ingredients, such as bitter orange, which do not appear to be as effective. The dietary fiber, glucomannan, also appears to hold some promise as a possible treatment for weight loss, but other related forms of dietary fiber, including guar gum and psyllium, are ineffective.

  13. Intermittent Microwave Drying of Wheat (Triticum aestivum L. Seeds

    Directory of Open Access Journals (Sweden)

    Yan Li

    2014-02-01

    Full Text Available The purpose of present study was to characterize the intermittent microwave drying of wheat seeds. Results revealed that microwave on time percentage (MOTP and initial moisture content were the main parameters which influenced the intermittent microwave drying rate and the germination capacity of dried seeds. Best intermittent microwave drying (power: 800 W; seed sample weight: 100 g, microwave on time in each cycle: 32 s without significantly decreasing the germination rate was obtained at initial moisture content≤ 20.3% along with 20% MOTP. While, if initial moisture content of seeds was ≤ 16.7%, the seeds can be dried more rapidly using MOTP 30% without affecting germination capacity. The results obtained from this study would provide technical basis to select optimal wheat seed processing and design seed drying equipments.

  14. Autochthonous "Bjelovars dried cheese"

    Directory of Open Access Journals (Sweden)

    Slavko Kirin

    2006-12-01

    Full Text Available «Dried cheese» is in autochthonous group of Bjelovar region cheeses which is still produced in rural domestic scale. The name of cheese originates from production procedure - drying for longer or shorter period in airy place after which the cheese is smoked, or is smoked only without drying. This type of cheese is produced in whole central region of Croatia which includes Međimurje, Podravina, Bilogora; Moslavina, Posavina and region around the capital. The aim of this paper is to describe and determine sensory, chemical and microbiological composition to determine its characteristics and production standards. As standards for sensory properties following characteristics can be used: a Outer shape: dimensions: diameter: 140-145 mm, height: 58-61 mm, mass: 700-750 g, equal, rounded shape, smooth skin, equal colour; b Consistency: easily cut, elastic, soft; c Cut: nicely combined white body, few improper holes of equal size; d Odour: pleasant milky acid odour, fairly smoky; e Taste: Fairly milky acidic taste, medium salty, fairly smoky taste. Depending on fat in dry matter content and water content in non fat dry matter, analyzed samples can be characterized as quarter fat, soft and semidry cheese. Higher acidity and saltiness was determined in some samples, microbiological analyses has shown that the most common contaminants are yeasts and moulds.

  15. Drying of Malaysian Capsicum annuum L. (Red Chili) Dried by Open and Solar Drying

    OpenAIRE

    Ahmad Fudholi; Mohd Yusof Othman; Mohd Hafidz Ruslan; Kamaruzzaman Sopian

    2013-01-01

    This study evaluated the performance of solar drying in the Malaysian red chili (Capsicum annuum L.). Red chilies were dried down from approximately 80% (wb) to 10% (wb) moisture content within 33 h. The drying process was conducted during the day, and it was compared with 65 h of open sun drying. Solar drying yielded a 49% saving in drying time compared with open sun drying. At the average solar radiation of 420 W/m2 and air flow rate of 0.07 kg/s, the collector, drying system, and pickup de...

  16. STUDYING CONFORMATIONAL REARRANGEMENTS OF PROTEIN WHEN DRYING

    Directory of Open Access Journals (Sweden)

    Danilchenko A. S.

    2016-09-01

    Full Text Available The article gives a review and the experimental data on the nutritional value of eggs protein comprising protein, carbohydrates, minerals and amino acids. Metabolism, the structure and function of each cell, as well as external and internal protective functions are defined by proteins. We consider the study of functions of trace elements found in significant numbers in the eggs, which contribute to health: vitamin D, vitamin B12, choline, folic acid, selenium, lutein and zeaxanthin. The high content of egg protein contributes to greater satiety, weight loss and eye health. We present experimental data on the amino acid composition of the protein and experiments of drying a cooked egg white, placed in a Petri dish. After 10 minutes of drying, the weight of the protein did not change and amounted to 0.1 g, which is 16% of the weight of the original white protein. The photo shows that the protein is lost during drying white and became transparent, and protein grains look like "melted" and partially connected with each other. The data obtained can be used for understanding the operation of the biological process of protein in vivo

  17. The effect of slicing type on drying kinetics and quality of dried carrot

    Directory of Open Access Journals (Sweden)

    M Naghipour zadeh mahani

    2016-04-01

    Full Text Available Introduction: Carrot is one of the most common vegetables used for human nutrition because of its high vitamin and fiber contents. Drying improves the product shelf life without addition of any chemical preservative and reduces both the size of package and the transport cost. Drying also aidsto reduce postharvest losses of fruits and vegetables especially, which can be as high as 70%. Dried carrots are used in dehydrated soups and in the form of powder in pastries and sauces. The main aim of drying agricultural products is decrease the moisture content to a level which allows safe storage over an extended period. Many fruits and vegetables can be sliced before drying.because of different tissue of a fruit or vegetable, cutting them in different direction and shape created different tissue slices. Due to drying is the exiting process of the moisture from internal tissue so different tissue slices caused different drying kinetics. Therefore, the study on effect of cutting parameters on drying is necessary. Materials and Methods: Carrots (Daucus carota L. were purchased from the local market (Kerman, Iran and stored in a refrigerator at 5°C. The initial moisture contents of the Carrot samples were determined by the oven drying method. The sample was dried in an oven at 105±2°C about 24 hours. The carrots cut by 3 models blade at 3 directions. The samples were dried in an oven at 70°C. Moisture content of the carrot slices were determined by weighting of samples during drying. Volume changes because of sample shrinkage were measured by a water displacement method. Rehydration experiment was performed by immersing a weighted amount of dried samples into hot water 50 °C for 30 min. In this study the effect of some cutting parameters was considered on carrot drying and the quality of final drying product. The tests were performed as a completely random design. The effects of carrot thickness at two levels (3 and 6 mm, blade in 3 models (flat blade

  18. The effect of slicing type on drying kinetics and quality of dried carrot

    Directory of Open Access Journals (Sweden)

    M Naghipour zadeh mahani

    2016-04-01

    Full Text Available Introduction: Carrot is one of the most common vegetables used for human nutrition because of its high vitamin and fiber contents. Drying improves the product shelf life without addition of any chemical preservative and reduces both the size of package and the transport cost. Drying also aidsto reduce postharvest losses of fruits and vegetables especially, which can be as high as 70%. Dried carrots are used in dehydrated soups and in the form of powder in pastries and sauces. The main aim of drying agricultural products is decrease the moisture content to a level which allows safe storage over an extended period. Many fruits and vegetables can be sliced before drying.because of different tissue of a fruit or vegetable, cutting them in different direction and shape created different tissue slices. Due to drying is the exiting process of the moisture from internal tissue so different tissue slices caused different drying kinetics. Therefore, the study on effect of cutting parameters on drying is necessary. Materials and Methods: Carrots (Daucus carota L. were purchased from the local market (Kerman, Iran and stored in a refrigerator at 5°C. The initial moisture contents of the Carrot samples were determined by the oven drying method. The sample was dried in an oven at 105±2°C about 24 hours. The carrots cut by 3 models blade at 3 directions. The samples were dried in an oven at 70°C. Moisture content of the carrot slices were determined by weighting of samples during drying. Volume changes because of sample shrinkage were measured by a water displacement method. Rehydration experiment was performed by immersing a weighted amount of dried samples into hot water 50 °C for 30 min. In this study the effect of some cutting parameters was considered on carrot drying and the quality of final drying product. The tests were performed as a completely random design. The effects of carrot thickness at two levels (3 and 6 mm, blade in 3 models (flat blade

  19. Effects of the usage of dried brewing yeast in the diets on the performance, egg traits and blood parameters in quails.

    Science.gov (United States)

    Yalçın, S; Erol, H; Ozsoy, B; Onbaşılar, I; Yalçın, S

    2008-12-01

    This experiment was carried out to determine the effects of the usage of dried brewing yeast in quail diets on laying performance, egg traits and blood parameters. A total of 240 Japanese quails (Coturnix coturnix japonica) aged 10 weeks were randomly allocated into one control group and three treatment groups. Each group was divided into five replicates as subgroups, comprising 12 quails each. Dried brewing yeast (Saccharomyces cerevisiae) was used at the levels of 1.5%, 3.0% and 4.5% in the diets of the first, second and third treatment groups, respectively. Soyabean meal was replaced with dried brewing yeast. The diets were formulated to be isocaloric and isonitrogenous. The experimental period lasted 18 weeks. Dietary treatments did not significantly affect body weight, daily feed intake, daily protein intake, egg production, egg weight, feed efficiency, mortality, egg shell thickness, egg albumen index, egg yolk index, egg Haugh unit, the percentages of egg shell, albumen and yolk, excreta moisture and small intestinal pH. Inclusion of 3% and 4.5% dried brewing yeast in diets reduced egg yolk cholesterol concentration as mg per yolk and mg per g yolk (P brewing yeast was significantly lower (P brewing yeast resulted in significant increases (P brewing yeast. It is concluded that dried brewing yeast can be used up to 4.5% in the diets of laying quails without adverse effects on the measured parameters.

  20. Drying of Concrete

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Geiker, Mette Rica; Nygaard, Peter Vagn;

    2002-01-01

    Estimated and measured relative humidity (RH) change during drying are compared for two concretes, 1: w/c=0.46 and 2: w/(c+0.5fa+2sf)=0.50. The estimations were undertaken by means of the Swedish program TorkaS 1.0. Measurements were performed by RH-sensors type Humi-Guard. Drying of 150 mm thick...... samples from sides at 60% RH and 22 °C took place from 4 to 56 days after casting. At the end of the drying period the measured RH was about 4% lower than the estimated RH at 1/5th depth from the exposed surface for both concretes. In the middle of the samples, the measured RH of concretes 1 and 2 were 2...

  1. Drying of Concrete

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Geiker, Mette Rica; Nygaard, Peter Vagn

    2002-01-01

    Estimated and measured relative humidity (RH) change during drying are compared for two concretes, 1: w/c=0.46 and 2: w/(c+0.5fa+2sf)=0.50. The estimations were undertaken by means of the Swedish program TorkaS 1.0. Measurements were performed by RH-sensors type Humi-Guard. Drying of 150 mm thick...... samples from sides at 60% RH and 22 °C took place from 4 to 56 days after casting. At the end of the drying period the measured RH was about 4% lower than the estimated RH at 1/5th depth from the exposed surface for both concretes. In the middle of the samples, the measured RH of concretes 1 and 2 were 2...

  2. SILAGE CANE SUGAR ADDED WITH DRIED BREWER

    Directory of Open Access Journals (Sweden)

    W. J. R. Castro

    2015-02-01

    Full Text Available The objective of this experiment was to evaluate the fermentative parameters and chemical composition of silage cane sugar added with residue dried brewery. The experimental design was completely randomized with four treatments and four replications: 100% cane sugar; 90% of cane sugar + 10% residue dried brewer; 80% of cane sugar + 20% residue dried brewer and 70% cane sugar + 30% dried brewer based on natural matter, composed silages. The sugar cane was chopped in a stationary machine with forage particle size of approximately 2 cm, and homogenized manually with the additives. For storage chopped fresh weight were used in experimental silos capacity of about 4 liters. The results showed that the contents of dry matter and crude protein showed positive linear (P0.05 with mean value of 3.81, while for ether extract and ash results were positive linear (P0.05 for N ammonia presented average value of 4.18. It is concluded that the addition of brewer dehydrated improves the fermentation process of silage cane sugar, in addition to improving their nutritional characteristics.

  3. Magnetically responsive dry fluids

    Science.gov (United States)

    Sousa, Filipa L.; Bustamante, Rodney; Millán, Angel; Palacio, Fernando; Trindade, Tito; Silva, Nuno J. O.

    2013-07-01

    Ferrofluids and dry magnetic particles are two separate classes of magnetic materials with specific niche applications, mainly due to their distinct viscosity and interparticle distances. For practical applications, the stability of these two properties is highly desirable but hard to achieve. Conceptually, a possible solution to this problem would be encapsulating the magnetic particles but keeping them free to rotate inside a capsule with constant interparticle distances and thus shielded from changes in the viscosity of the surrounding media. Here we present an example of such materials by the encapsulation of magnetic ferrofluids into highly hydrophobic silica, leading to the formation of dry ferrofluids, i.e., a material behaving macroscopically as a dry powder but locally as a ferrofluid where magnetic nanoparticles are free to rotate in the liquid.Ferrofluids and dry magnetic particles are two separate classes of magnetic materials with specific niche applications, mainly due to their distinct viscosity and interparticle distances. For practical applications, the stability of these two properties is highly desirable but hard to achieve. Conceptually, a possible solution to this problem would be encapsulating the magnetic particles but keeping them free to rotate inside a capsule with constant interparticle distances and thus shielded from changes in the viscosity of the surrounding media. Here we present an example of such materials by the encapsulation of magnetic ferrofluids into highly hydrophobic silica, leading to the formation of dry ferrofluids, i.e., a material behaving macroscopically as a dry powder but locally as a ferrofluid where magnetic nanoparticles are free to rotate in the liquid. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr01784b

  4. Dry fermentation of agricultural residues

    Science.gov (United States)

    Jewell, W. J.; Chandler, J. A.; Dellorto, S.; Fanfoni, K. J.; Fast, S.; Jackson, D.; Kabrick, R. M.

    1981-09-01

    A dry fermentation process is discussed which converts agricultural residues to methane, using the residues in their as produced state. The process appears to simplify and enhance the possibilities for using crop residues as an energy source. The major process variables investigated include temperature, the amount and type of inoculum, buffer requirements, compaction, and pretreatment to control the initial available organic components that create pH problems. A pilot-scale reactor operation on corn stover at a temperature of 550 C, with 25 percent initial total solids, a seed-to-feed ratio of 2.5 percent, and a buffer-to-feed ratio of 8 percent achieved 33 percent total volatile solids destruction in 60 days. Volumetric biogas yields from this unit were greater than 1 vol/vol day for 12 days, and greater than 0.5 vol/vol day for 32 days, at a substrate density of 169 kg/m (3).

  5. Properties of Spray Dried Food and Spray Drying Characteristics

    Science.gov (United States)

    Katoh, Fumio

    The following conclusions are obtained, studying properties of spray dried food and drying characteristics. (a) Dried particles are similar to spray droplets in size distribution (y=2.5), and particle count distribution is arranged as (dn/dx = ae-bx). (b) The ratio of the particle diameters before and after drying is calculated with moisture before and after drying, and porosity is given as (εp = ww4). (c) The standard drying method is presented to evaluate accurately drying problems at a certain standard. (d) Equilibrium moisture at 20 up to 100°C are summarized in terms of adsorption potential. (e) It makes clear that calulation based on the theory of residence time and drying time represents well complex spray drying characteristics.

  6. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / Eye Health A-Z Dry Eye ... when I sleep? Feb 10, 2016 Leer en Español: ¿Qué Es el Ojo Seco? Find an Ophthalmologist ...

  7. Effect on Ligninolytic Enzyme System and Dry Weight of Mycelium of Pleurotus ostreatus by Different Exterior Factors in Straw Medium%稻草基质中外源因子对平菇木质素酶系及菌丝体产量的影响

    Institute of Scientific and Technical Information of China (English)

    赵文科; 柯丽霞; 张丁倩; 汪建中

    2009-01-01

    The effects of 6 different nitrogen sources,6 different metal ions,sodium glycollate and sodium oxalate at 1,3 and 5 mm on the activitives of laccase( Lac),manganese peroxidase( MnP) and dry weight of mycelium of Pleurotus ostreatus in straw medium were studied. The result showed that peptone and bean dreg powder significantly increased the activities of Lac compared to the control,and the activities of Lac were 2 503 U/L and 2 483 U/L on the 3rd and 4th day respectively. Peptone and bean dreg power also significantly increased the activities of MnP,and the activities of MnP were 1 144 U/L and 1 420 U/L on 4th and 5th day respectively. Maximum dry weight of mycelium was obtained with the nitrogen source of bean dregs powder,which was 1.616 g/100 mL. Of 6 different metal i-ons,compared to the control,5 mm Cu~(2+) significantly increased the activity of Lac,which reached 1 815 U/L on the 5th day,Mn~(2+) to 1 620 U/L of MnP on the 4th day. But Na~(2+),Zn~(2+) and Fe~(2+) decreased the activities of Lac and MnP. 1 mm sodium oxalate and sodium glycollate increased significantly the activities of Lac and MnP respectively. The peak activities of Lac and MnP were 3 410 U/L on the 4th day and 4 873 U/L on the 5 th day respectively. 1 mm sodium glycollate and 5 mm sodium oxalate increased the dry weight of mycelium remarkably,which reached 1.626 g/100 mL and 1.399 g/100 mL respectively.%研究了6种氮源、6种金属离子和浓度为1、3、5 mmol/L的草酸钠和甘醇酸钠对平菇液态发酵稻草产漆酶(Lac)、锰过氧化物酶(MnP)的活性和菌丝体产量的影响.结果表明,与对照相比,6种氮源中蛋白胨和豆渣对Lac有显著的促进作用,在第3、4天分别达到2 503、2 483 U/L;对MnP亦有显著的促进作用,在第3、4天分别达到1144和1420 U/L.以豆渣为氮源的菌丝体产量最高,达到16.16 g/mL.6种金属离子中,与对照相比,5mmol/L Cu~(2+)对Lac有显著的促进作用,在第5天达到1815 U/L;Mn~(2+) 对MnP亦

  8. Infrared Drying Parameter Optimization

    Science.gov (United States)

    Jackson, Matthew R.

    In recent years, much research has been done to explore direct printing methods, such as screen and inkjet printing, as alternatives to the traditional lithographic process. The primary motivation is reduction of the material costs associated with producing common electronic devices. Much of this research has focused on developing inkjet or screen paste formulations that can be printed on a variety of substrates, and which have similar conductivity performance to the materials currently used in the manufacturing of circuit boards and other electronic devices. Very little research has been done to develop a process that would use direct printing methods to manufacture electronic devices in high volumes. This study focuses on developing and optimizing a drying process for conductive copper ink in a high volume manufacturing setting. Using an infrared (IR) dryer, it was determined that conductive copper prints could be dried in seconds or minutes as opposed to tens of minutes or hours that it would take with other drying devices, such as a vacuum oven. In addition, this study also identifies significant parameters that can affect the conductivity of IR dried prints. Using designed experiments and statistical analysis; the dryer parameters were optimized to produce the best conductivity performance for a specific ink formulation and substrate combination. It was determined that for an ethylene glycol, butanol, 1-methoxy 2- propanol ink formulation printed on Kapton, the optimal drying parameters consisted of a dryer height of 4 inches, a temperature setting between 190 - 200°C, and a dry time of 50-65 seconds depending on the printed film thickness as determined by the number of print passes. It is important to note that these parameters are optimized specifically for the ink formulation and substrate used in this study. There is still much research that needs to be done into optimizing the IR dryer for different ink substrate combinations, as well as developing a

  9. Quality of dry ginger (Zingiber officinale) by different drying methods.

    Science.gov (United States)

    E, Jayashree; R, Visvanathan; T, John Zachariah

    2014-11-01

    Ginger rhizomes sliced to various lengths of 5, 10, 15, 20, 30, 40, 50 mm and whole rhizomes were dried from an initial moisture content of 81.3 % to final moisture content of less than 10 % by various drying methods like sun drying, solar tunnel drying and cabinet tray drying at temperatures of 50, 55, 60 and 65 °C. Slicing of ginger rhizomes significantly reduced the drying time of ginger in all the drying methods. It was observed that drying of whole ginger rhizomes under sun took the maximum time (9 days) followed by solar tunnel drying (8 days). Significant reduction in essential oil and oleoresin content of dry ginger was found as the slice length decreased. The important constituents of ginger essential oil like zingiberene, limonene, linalool, geraniol and nerolidol as determined using a gas chromatography was also found to decrease during slicing and as the drying temperature increased. The pungency constituents in the oleoresin of ginger like total gingerols and total shogoals as determined using a reverse phase high performance liquid chromatography also showed a decreasing trend on slicing and with the increase in drying temperature. It was observed from the drying studies that whole ginger rhizomes dried under sun drying or in a solar tunnel drier retained the maximum essential oil (13.9 mg/g) and oleoresin content (45.2 mg/g) of dry ginger. In mechanical drying, the drying temperature of 60 °C was considered optimum however there was about 12.2 % loss in essential oil at this temperature.

  10. 应用多频生物电阻抗法调节血液透析患者干体重对血压的影响%Effect of adjusting dry weight by bio-impedance spectrum analysis on blood pressure control in hemodialysis patients

    Institute of Scientific and Technical Information of China (English)

    孙芳; 刘婧; 马丽洁; 沈洋; 崔太根; 周亦伦

    2011-01-01

    Objective To evaluate fluid distribution in patients on maintenance hemodialysis by whole-body bioimpedance spectroscopy and to evaluate the effect of adjusting dry body weight (DBW)on blood pressure control and complications in hemodialysis patients. Methods One hundred and nineteen stable hemodialysis patients were enrolled. Post-dialysis extracellular water(ECW)were measured by whole-body multi-frequency bioimpedance spectroscopy (Bodystat, UK) and standardized using body weight (ECW%). Eighty-two cases of sex, age and body weight matched normal individuals were selected as controls. DBW was adjusted according to the ECW%, and the effect of adjusting DBW on blood pressure control and complications was evaluated. Results Systolic blood pressure was significantly reduced after decreasing DBW in the group with high ECW% [from (165±15)mmHg to (142±10)mmHg in males,P < 0.01; from (160±7)mmHg to (138±6)mmHg in females, P < 0.01)], whereas dialysis-related complications didn't increase. DBW was increased in five symptomatic normotensive patients with low ECW%. The ECW% and blood pressure remained unchanged, while intradialytic symptoms improved. Conclusions Bio-impedance spectrum analysis is helpful for estimation of volume status and blood pressure control in hemodialysis patients.%目的 观察在多频生物电阻抗法指导下调节干体重(DBW)对血液透析患者血压及透析相关并发症的影响.方法 应用多频生物电阻抗分析仪测量细胞外液(ECW).根据同性别正常对照组的ECW值确定正常参考范围.对ECW增高(提示容量过负荷)者,逐步降低DBW,观察ECW和血压的变化.对ECW降低(提示容量不足)者,逐步升高DBW,观察ECW、血压及透析相关并发症的影响.结果 ECW增高者降低DBW后,透析间期男性收缩压从(165±15)mmHg下降至(142±10)mmHg(P<0.01);女性收缩压从(160±7)mmHg下降至(138±6)mmHg(P<0.01),且未增加透析相关并发症.ECW降低者升高DBW后,透

  11. Study on drying rate in contact drying with flexible screen

    Institute of Scientific and Technical Information of China (English)

    王伟宏; 陆仁书; 张显权

    2000-01-01

    The moisture contents (MC) of popular veneers were tested in Composition Board Laboratory of Northeast Forestry University by contact drying with flexible screen. The influence factors considered included temperature, initial moisture contents (IMC), and veneer thickness. Veneer-drying laws under different hot press conditions were analyzed. The results showed that the drying rate increased with temperature rising. 160℃ was considered to be more efficient than 140℃ and 180℃ because excessive high temperature has no significant contribution to drying rate. IMC had significant effect on drying rate. The veneer with high IMC had a higher drying rate at above fiber saturation point (FSP) and a lower drying rate at below FSP, compared to the veneer with low IMC. Average drying rate also varied with thickness in power law.

  12. Dry alcohol production plant

    Directory of Open Access Journals (Sweden)

    Stanković Mirjana S.

    2003-01-01

    Full Text Available The IGPC Engineering Department designed basic projects for dry alcohol production plant, using technology developed in the IGPC laboratories. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects a production plant with a capacity of 40 m3/y was manufactured, at "Zorka Pharma", Šabac in 1995-1996. The product meets all quality demands, as well as environmental regulations. The dry alcohol production process is fully automatized. There is no waste in the process, neither gaseous, nor liquid. The chosen process provides safe operation according to temperature regime and resistance in the pipes, air purification columns and filters. Working at increased pressure is suitable for evaporation and condensation at increased temperatures. The production process can be controlled manually, which is necessary during start-up, and repairs.

  13. Drying characteristics and kinetics of fluidized bed dried potato

    OpenAIRE

    S.B. BAKAL; K.H. GEDAM; Sharma, G. P.

    2008-01-01

    In developed countries, more than 50% potatoes are consumed as processed products. As drying is the vital phenomenon in processing, it is necessary to investigate the drying characteristics and its kinetics. In this experimental study, drying kinetics of Potato in two different shape of cuboidal & cylindrical with three aspect ratio was investigated as a function of drying conditions. Experiments were conducted using air temperatures of 50, 60 and 70 ºC, at velocity of 7 ms-1. The experimenta...

  14. Dry Eye Syndrome

    Directory of Open Access Journals (Sweden)

    Mohammad-Ali Javadi

    2011-01-01

    Full Text Available Our understanding of keratoconjunctivitis sicca (KCS, also known as dry eye syndrome, has been changed over recent years. Until lately, the condition was thought to be merely due to aqueous tear insufficiency. Today, it is understood that KCS is a multifactorial disorder due to inflammation of the ocular surface and lacrimal gland, neurotrophic deficiency and meibomian gland dysfunction. This change in paradigm has led to the development of new and more effective medications.

  15. Drying of complex suspensions

    OpenAIRE

    Xu, Lei; Bergés, Alexis; Lu, Peter J.; Studart, André R.; Schofield, Andrew B.; Oki, Hidekazu; Davies, Simon; Weitz, David A.

    2010-01-01

    We investigate the 3D structure and drying dynamics of complex mixtures of emulsion droplets and colloidal particles, using confocal microscopy. Air invades and rapidly collapses large emulsion droplets, forcing their contents into the surrounding porous particle pack at a rate proportional to the square of the droplet radius. By contrast, small droplets do not collapse, but remain intact and are merely deformed. A simple model coupling the Laplace pressure to Darcy's law correctly estimates ...

  16. Effect of Drying Methods on the Steroidal Alkaloid Content of Potato Peels, Shoots and Berries

    Directory of Open Access Journals (Sweden)

    Mohammad B. Hossain

    2016-03-01

    Full Text Available The present study has found that dried potato samples yielded significantly higher levels of steroidal alkaloids such as α-solanine and α-chaconine than the corresponding fresh samples, as determined by the UPLC-MS/MS technique. Among the drying techniques used, air drying had the highest effect on steroidal alkaloid contents, followed by freeze drying and vacuum oven drying. There was no significant difference between the freeze dried and vacuum oven dried samples in their α-chaconine contents. However, freeze dried potato shoots and berries had significantly higher α-solanine contents (825 µg/g dry weight (DW in shoots and 2453 µg/g DW in berries than the vacuum oven dried ones (325 µg/g dry weight (DW in shoots and 2080 µg/g DW in berries. The kinetics of steroidal alkaloid contents of potato shoots during air drying were monitored over a period of 21 days. Both α-solanine and α-chaconine content increased to their maximum values, 875 µg/g DW and 3385 µg/g DW, respectively, after 7 days of drying. The steroidal alkaloid contents of the shoots decreased significantly at day 9, and then remained unchanged until day 21. In line with the potato shoots, air dried potato tuber peels also had higher steroidal alkaloid content than the freeze dried and vacuum oven dried samples. However, a significant decrease of steroidal alkaloid content was observed in air dried potato berries, possibly due to degradation during slicing of the whole berries prior to air drying. Remarkable variation in steroidal alkaloid contents among different tissue types of potato plants was observed with the potato flowers having the highest content.

  17. Effect of Drying Methods on the Steroidal Alkaloid Content of Potato Peels, Shoots and Berries.

    Science.gov (United States)

    Hossain, Mohammad B; Brunton, Nigel P; Rai, Dilip K

    2016-03-25

    The present study has found that dried potato samples yielded significantly higher levels of steroidal alkaloids such as α-solanine and α-chaconine than the corresponding fresh samples, as determined by the UPLC-MS/MS technique. Among the drying techniques used, air drying had the highest effect on steroidal alkaloid contents, followed by freeze drying and vacuum oven drying. There was no significant difference between the freeze dried and vacuum oven dried samples in their α-chaconine contents. However, freeze dried potato shoots and berries had significantly higher α-solanine contents (825 µg/g dry weight (DW) in shoots and 2453 µg/g DW in berries) than the vacuum oven dried ones (325 µg/g dry weight (DW) in shoots and 2080 µg/g DW in berries). The kinetics of steroidal alkaloid contents of potato shoots during air drying were monitored over a period of 21 days. Both α-solanine and α-chaconine content increased to their maximum values, 875 µg/g DW and 3385 µg/g DW, respectively, after 7 days of drying. The steroidal alkaloid contents of the shoots decreased significantly at day 9, and then remained unchanged until day 21. In line with the potato shoots, air dried potato tuber peels also had higher steroidal alkaloid content than the freeze dried and vacuum oven dried samples. However, a significant decrease of steroidal alkaloid content was observed in air dried potato berries, possibly due to degradation during slicing of the whole berries prior to air drying. Remarkable variation in steroidal alkaloid contents among different tissue types of potato plants was observed with the potato flowers having the highest content.

  18. Dry mouth during cancer treatment

    Science.gov (United States)

    ... gov/ency/patientinstructions/000032.htm Dry mouth during cancer treatment To use the sharing features on this page, please enable JavaScript. Some cancer treatments and medicines can cause dry mouth. Symptoms you ...

  19. Nitramine Drying & Fine Grinding Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Nitramine Drying and Fine Grinding Facility provides TACOM-ARDEC with a state-of-the-art facility capable of drying and grinding high explosives (e.g., RDX and...

  20. Perceptions of Body Weight, Weight Management Strategies, and Depressive Symptoms among US College Students

    Science.gov (United States)

    Harring, Holly Anne; Montgomery, Kara; Hardin, James

    2010-01-01

    Objective: To determine if inaccurate body weight perception predicts unhealthy weight management strategies and to determine the extent to which inaccurate body weight perception is associated with depressive symptoms among US college students. Participants: Randomly selected male and female college students in the United States (N = 97,357).…

  1. Evolución del peso seco en pacientes ancianos en hemodiálisis y posible influencia de la actividad física en el mismo Evolution of the dry weight in elderly patients in hemodialysis and the possible influence of the physical activity in the same one

    Directory of Open Access Journals (Sweden)

    Pilar Peña Amaro

    2010-03-01

    Full Text Available El objetivo de este trabajo es analizar la evolución del "peso seco" -masa muscular, masa grasa y agua- en una población de pacientes ancianos afectados por insuficiencia renal crónica terminal (IRCT en un programa sustitutivo de la función renal en Hemodiálisis (HD, que realizan una actividad física moderada y constante comparada con otra población que no la realiza. La actividad física se ha utilizado como un medio para conservar o mejorar la salud de todos los individuos desde hace muchos años y, por supuesto, en los ancianos también. Es muy valorado en algunas patologías (hipertensión arterial, cardiopatías isquémicas, osteoporosis, diabetes y problemas psicológicos/psiquiátricos. Hemos usado para monitorizar estos parámetros un analizador de masa corporal por Bioimpedancia (BIA que nos aporta los datos objetivos en cuanto a la composición del cuerpo de un anciano. Así, podremos observar los posibles cambios producidos por el ejercicio.The aim of this work is to analyze the evolution of the dry weight, muscular mass, mass fat and water in a population of patients ancients affected by Renal Insufficiency Terminal Chronicle (IRCT in program of haemodialysis (HD that perform a constant and moderate physical activity and other population that not making it. Physical activity has been used as a way to preserve or improve the health of all individuals for many years and certainly in the ancient as well. Very valued in some pathologies (arterial hypertension, cardiopathies isquémicas, osteoporosis, diabetes and psychiatric psychological/problems. to monitorice these parameters we used body mass analyzer Bioimpedance (BIA that shows us objective data regarding the composition of the body of an elder. Then we can observe the possible changes produced by exercise.

  2. Fluid flow in drying drops

    NARCIS (Netherlands)

    Gelderblom, H.

    2013-01-01

    When a suspension drop evaporates, it leaves behind a drying stain. Examples of these drying stains encountered in daily life are coffee or tea stains on a table top, mineral rings on glassware that comes out of the dishwasher, or the salt deposits on the streets in winter. Drying stains are also pr

  3. National neonatal weight policy survey.

    LENUS (Irish Health Repository)

    Walsh, B

    2009-06-01

    This survey was conducted to review the current practice regarding frequency of weight measurement in neonatal units in the Republic of Ireland, and whether these practices are in keeping with best practice as described in the literature. There was an 88.5% (23 of 26) response rate to this survey. 6 (26%) units had a written policy, and 16 (70%) had an unwritten agreed practice. In the Vermont Oxford Network\\'s potentially better practices daily weight measurements on newborn infants are recommended until the infant is stable and growing and then alternate day measurements The most common practices in this survey were to weigh infants on alternate days, this occurred in 9 (39%) units, and twice weekly in 6 (26%). Less than 31% of units had a separate policy for those less than 30 weeks, on assisted ventilation, or transitioning to enteral feeds. Most weigh infants on alternate days, and plot weights weekly, which is in keeping with best practice. Few units have separate policies for specific subgroups as is recommended in the limited literature. Consensus guidelines should be developed and promoted nationally.

  4. National neonatal weight policy survey.

    LENUS (Irish Health Repository)

    Walsh, B

    2012-02-01

    This survey was conducted to review the current practice regarding frequency of weight measurement in neonatal units in the Republic of Ireland, and whether these practices are in keeping with best practice as described in the literature. There was an 88.5% (23 of 26) response rate to this survey. 6 (26%) units had a written policy, and 16 (70%) had an unwritten agreed practice. In the Vermont Oxford Network\\'s potentially better practices daily weight measurements on newborn infants are recommended until the infant is stable and growing and then alternate day measurements The most common practices in this survey were to weigh infants on alternate days, this occurred in 9 (39%) units, and twice weekly in 6 (26%). Less than 31% of units had a separate policy for those less than 30 weeks, on assisted ventilation, or transitioning to enteral feeds. Most weigh infants on alternate days, and plot weights weekly, which is in keeping with best practice. Few units have separate policies for specific subgroups as is recommended in the limited literature. Consensus guidelines should be developed and promoted nationally.

  5. Terrestrial Planets Accreted Dry

    Science.gov (United States)

    Albarede, F.; Blichert-Toft, J.

    2007-12-01

    Plate tectonics shaped the Earth, whereas the Moon is a dry and inactive desert. Mars probably came to rest within the first billion years of its history, and Venus, although internally very active, has a dry inferno for its surface. The strong gravity field of a large planet allows for an enormous amount of gravitational energy to be released, causing the outer part of the planetary body to melt (magma ocean), helps retain water on the planet, and increases the pressure gradient. The weak gravity field and anhydrous conditions prevailing on the Moon stabilized, on top of its magma ocean, a thick buoyant plagioclase lithosphere, which insulated the molten interior. On Earth, the buoyant hydrous phases (serpentines) produced by reactions between the terrestrial magma ocean and the wet impactors received from the outer Solar System isolated the magma and kept it molten for some few tens of million years. The elemental distributions and the range of condensation temperatures show that the planets from the inner Solar System accreted dry. The interior of planets that lost up to 95% of their K cannot contain much water. Foundering of their wet surface material softened the terrestrial mantle and set the scene for the onset of plate tectonics. This very same process may have removed all the water from the surface of Venus 500 My ago and added enough water to its mantle to make its internal dynamics very strong and keep the surface very young. Because of a radius smaller than that of the Earth, not enough water could be drawn into the Martian mantle before it was lost to space and Martian plate tectonics never began. The radius of a planet therefore is the key parameter controlling most of its evolutional features.

  6. Spray Drying Processing: granules production and drying kinetics of droplets; El proceso de secado por atomizacion: formacion de granulos y cinetica de secado de gotas

    Energy Technology Data Exchange (ETDEWEB)

    Mondragon, R.; Julia, J. E.; Barba, A.; Jarque, J. C.

    2013-09-01

    Spray drying is a unit operation very common in many industrial processes. For each particular application, the resulting granulated material must possess determined properties that depend on the conditions in which the spray drying processing has been carried out, and whose dependence must be known in order to optimize the quality of the material obtained. The large number of variables that influence on the processes of matter and energy transfer and on the formation of granular material has required a detailed analysis of the drying process. Over the years there have been many studies on the spray drying processing of all kind of materials and the influence of process variables on the drying kinetics of the granulated material properties obtained. This article lists the most important works published for both the spray drying processing and the drying of individual droplets, as well as studies aimed at modeling the drying kinetics of drops. (Author)

  7. Electrohydrodynamic drying of carrot slices.

    Directory of Open Access Journals (Sweden)

    Changjiang Ding

    Full Text Available Carrots have one of the highest levels of carotene, and they are rich in vitamins, fiber and minerals. However, since fresh carrots wilt rapidly after harvest under inappropriate storage conditions, drying has been used to improve their shelf life and retain nutritional quality. Therefore, to further investigate the potential of this method, carrot slices were dried in an EHD system in order to study the effect of different voltages on drying rate. As measures of quality, carotene content and rehydration ratio were, respectively, compared against the conventional oven drying regime. Carotene, the main component of the dried carrot, and rehydration characteristics of the dried product can both indicate quality by physical and chemical changes during the drying process. Mathematical modeling and simulation of drying curves were also performed, using root mean square error, reduced mean square of the deviation and modeling efficiency as the primary criteria to select the equation that best accounts for the variation in the drying curves of the dried samples. Theoretically, the Page model was best suited for describing the drying rate curve of carrot slices at 10kV to 30kV. Experimentally, the drying rate of carrots was notably greater in the EHD system when compared to control, and quality, as determined by carotene content and rehydration ratio, was also improved when compared to oven drying. Therefore, this work presents a facile and effective strategy for experimentally and theoretically determining the drying properties of carrots, and, as a result, it provides deeper insight into the industrial potential of the EHD drying technique.

  8. Optimal scales in weighted networks

    CERN Document Server

    Garlaschelli, Diego; Fink, Thomas M A; Caldarelli, Guido

    2013-01-01

    The analysis of networks characterized by links with heterogeneous intensity or weight suffers from two long-standing problems of arbitrariness. On one hand, the definitions of topological properties introduced for binary graphs can be generalized in non-unique ways to weighted networks. On the other hand, even when a definition is given, there is no natural choice of the (optimal) scale of link intensities (e.g. the money unit in economic networks). Here we show that these two seemingly independent problems can be regarded as intimately related, and propose a common solution to both. Using a formalism that we recently proposed in order to map a weighted network to an ensemble of binary graphs, we introduce an information-theoretic approach leading to the least biased generalization of binary properties to weighted networks, and at the same time fixing the optimal scale of link intensities. We illustrate our method on various social and economic networks.

  9. A dry element

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, T.; Ota, A.

    1983-08-11

    The agglomerate for the element is made from activated charcoal powder, an electrically conducting additive and a neutral electrolyte. The activated charcoal makes up 30 to 50 percent of the weight of the agglomerate. It is a mixture of hydrophobized and unhydrophobized powder in a ratio of 85 to 70 to 15 to 30. The element has high discharge characteristics.

  10. 干体重控制及低钠透析对血透患者高血压控制的作用%Effect of reducing dry body weight and decreasing dialysate sodium concentration on blood pressure control in maintenance hemodialysis patients

    Institute of Scientific and Technical Information of China (English)

    刘婧; 刘冬雪; 周亦伦; 孙芳; 马丽洁; 沈洋; 黄静; 崔太根

    2012-01-01

    Objective To explore the possible effect of individualized therapeutic interventions on blood pressure control in maintenance hemodialysis patients. Methods Home blood pressure monitoring was carried out in stable maintenance HD patients in our center, systolic blood pressure (Home-SBP) 3> 150 mmHg was defined as uncontrolled hypertension. Those with uncontrolled hypertension were subject to bioimpendance analysis, serum sodium measurement, and antihypertensive agents evaluation. Individualized interventions including reducing dry body weight, negative sodium gradient dialysis and re-adjusting antihypertensive agents were applied accordingly. The patients were followed for 2 months, and home -BP was monitored. Results 105 HD patients in total had their home-BP monitored, sixty patients were determined as uncontrolled hypertension (57.1%). Thirty over-hydrated patients had their dry body weight reduced under guidance of bioimpedance technique, which resulted in significant decrease in Home-SBP (12 mmHg, P< 0.001), Home-DBP (5 mmHg, P = 0.002) and dose of antihypertensive agents (P= 0.030). Twelve patients with their serum sodium level lower than dialysate sodium were subject to negative sodium gradient dialysis, significant decrease in Home-SBP (14.0 mmHg, P = 0.003), Home-DBP (8.1 mmHg, P = 0.014) were discovered. The other 18 patients had their Home-SBP and Home-DBP significantly reduced (11.6 mmHg, P < 0.001; 4.2 mmHg, P = 0.021) by re-adjusting antihypertensive drugs. The overall percentage of uncontrolled hypertension was decreased to 31.4% (P < 0.001) at the end of study. Conclusion Application of individualized therapeutic interventions in hypertensive HD patients is helpful in improving overall BP control.%目的 探索基于不同病因的个体化治疗模式对改善血液透析(HD)患者高血压控制率的影响.方法 选取我院部分稳定维持性HD患者进行家庭血压(Home-BP)监测,以家庭血压的收缩压(Home-SBP)≥150 mmHg为未控

  11. Tactical decisions of concentrate level, slaughter age and carcass weight of bulls of five beef breeds under Norwegian conditions

    Directory of Open Access Journals (Sweden)

    H. BONESMO

    2008-12-01

    Full Text Available Beef production based on suckler cow breeds is a relatively new production system in Norway as in most Nordic countries. To ensure the continuation of this production, profitable management practices designed for Norwegian conditions have to be established. Thus a simulation model was developed that integrates the daily feed intake, the daily live weight (LW gain, silage net energy concentration for beef production (feed units beef (FUb kg?1 dry matter and price, concentrate level and price, and carcass price for bulls of the country's five most common beef breeds. In this work the model was combined with production statistics to find general recommendations in the finishing of beef bulls under Norwegian conditions. Among all the five breeds the Limousin bulls had the highest estimated mean daily return and the Hereford bulls the lowest estimated mean daily return from 20 g concentrate kg?1 LW0.75 for the 940 FUb kg?1 silage dry matter, and from 40 g concentrate kg?1 LW0.75 for the 800 FUb kg?1 silage dry matter. Our estimated optimal slaughter ages and carcass weights shows that it pays to more intensively feed during the finishing period for all five breeds. Current farming practice in Norway for the five major breeds studied is that slaughter age is at least two months later with lighter carcass weights than the results expected from following our model estimated recommendations.

  12. Dry EEG Electrodes

    Directory of Open Access Journals (Sweden)

    M. A. Lopez-Gordo

    2014-07-01

    Full Text Available Electroencephalography (EEG emerged in the second decade of the 20th century as a technique for recording the neurophysiological response. Since then, there has been little variation in the physical principles that sustain the signal acquisition probes, otherwise called electrodes. Currently, new advances in technology have brought new unexpected fields of applications apart from the clinical, for which new aspects such as usability and gel-free operation are first order priorities. Thanks to new advances in materials and integrated electronic systems technologies, a new generation of dry electrodes has been developed to fulfill the need. In this manuscript, we review current approaches to develop dry EEG electrodes for clinical and other applications, including information about measurement methods and evaluation reports. We conclude that, although a broad and non-homogeneous diversity of approaches has been evaluated without a consensus in procedures and methodology, their performances are not far from those obtained with wet electrodes, which are considered the gold standard, thus enabling the former to be a useful tool in a variety of novel applications.

  13. Solar drying and agribusiness

    Directory of Open Access Journals (Sweden)

    Sebastiana del Monserrate Ruiz Cedeño

    2016-07-01

    Full Text Available Agribusinesses are the livelihoods of rural populations, but when production increase, many products are damaged and lose their commercial value due to lack of conservation treatments at a local level. Agricultural production represents the foundation of economic development of the province of Manabi. A significant level of agricultural products is lost due to lack of conservation technologies. Solar drying is a way of conserving by dehydration of some products such as: vegetables, fruits, aromatic and medicinal plants. This can be achieved by a process of proper conservation that is conducive to reduce losses using technologies easy to build, as are the different types of solar dryers which are already used in different parts of the South American region. This article proposes to introduce solar-drying technology in agricultural areas of the province of Manabi. And thereby achieve the regaining of different products that today are lost, incorporating new and attractive, marketable lines based on agricultural products naturally dehydrated with a high nutritionalvalue, capable of contributing to human health not only in the province but also in the country.

  14. Assessment of requirements for dry towers

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, D E; Sonnichsen, J C

    1976-09-01

    The regional limitations of surface water supplies in the U.S. were assessed with respect to the consumptive use requirements of wet cooling towers. The study simulated unit consumptive use factors by region, assessed regional water supplies, and examined electric load projections through 2000 A.D. to ascertain where and when water limitations may occur and, therefore, where dry cooling may be required. It was concluded that the cooling water supply situation in the United States through the year 2000 is adequate in most areas, but is uncertain over much of the Southwest. The uncertainty is related to increasing competition for the available supplies and to potential Federal and/or State policy decisions that may have a significant effect on power plant cooling. Limitations on coastal siting, seismic zone constraints, and state constraints on the purchase and transfer of water rights from other uses to cooling supply have the potential of bringing wet/dry or dry cooling into relatively common use in the 1990's. (LCL)

  15. An engineering and economic evaluation of wet and dry pre-fractionation processes for dry-grind ethanol facilities.

    Science.gov (United States)

    Lin, Tao; Rodríguez, Luis F; Li, Changying; Eckhoff, Steven R

    2011-10-01

    An engineering-economic model was developed to compare the profitability of the wet fractionation process, a generic dry fractionation process, and the conventional dry grind process. Under market conditions as of January 2011, only fractionation processes generated a positive cash flow. Reduced unit manufacturing costs and increased ethanol production capacity were two major contributions. Corn and ethanol price sensitivity analysis showed that the wet fractionation process always outperformed a generic dry fractionation process at any scenario considered in this research. A generic dry fractionation process would provide better economic performance than the conventional dry grind process if corn price was low and ethanol price was high. All three processes would perform more resiliently if the DDGS price was determined by its composition. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Process Parameter Study on Microwave-assisted Foam-mat Drying Properties of Corn Soaking Water

    Institute of Scientific and Technical Information of China (English)

    Zheng Xian-zhe

    2016-01-01

    In order to study the microwave-assisted foam-mat drying properties of corn soaking water and optimize process parameters, a quadratic regression orthogonal rotary method was used to analyze the influence of microwave power, material weight, material thickness and drying time on moisture content (dry basis), color value and protein content. Results showed that the primary and secondary sequence of parameters with regard to moisture content (d. b.) was drying time, microwave power, material weight and material thickness; the primary and secondary sequence of parameters with regard to color value was material weight, drying time, microwave power and material thickness; the primary and secondary sequence of parameters with regard to protein content was drying time, material weight, microwave power and material thickness. Optimum conditions were obtained as microwave power of 560 W, material weight of 46.88 g, material thickness of 6.20 mm and drying time of 8.01 min. The results might provide the theoretical basis and technical support for the microwave-assisted foam-mat drying of corn soaking water to produce yeast protein power.

  17. Drying of red beetroot after osmotic pretreatment: Kinetics and quality considerations

    Directory of Open Access Journals (Sweden)

    Kowalski Stefan J.

    2015-09-01

    Full Text Available This article presents experimental studies on drying kinetics and quality effects of red beetroot (Beta vulgaris L. after convective drying with a preliminary osmotic pretreatment. The effects of the osmotic agent (NaCl concentration and the osmotic bath time on the product colour and nutrient content preservation, the water activity, and rehydration ability after drying were analysed. Osmotic dehydration curves and Solid Gain (SG, Water Loss (WL, Weight Reduction (WR were determined. It was proved that drying of beetroot with osmotic pretreatment contributes to shorter drying time, smaller water activity, higher retention of betanin, better colour preservation, and a greater degree of water resorption.

  18. The effect of increased levels of dried coconut meal supplemented with an enzyme cocktail® on diet utilization in growing pigs

    Directory of Open Access Journals (Sweden)

    Prawit Rodjan

    2017-02-01

    Full Text Available The experiment was conducted to determine the effect of increased levels of dried coconut meal supplemented with an enzyme cocktail® on diet utilization in growing pigs. A 4x4 latin square design was used in this study. Four crossbred (Duroc x Landrace x Large White barrows averaging 17.88±0.96 kg in body weight were allotted 4 diets, diet 1 (the control diet, diet 2, diet 3 and diet 4 (5, 10 and 15% dried coconut meal in each diet with an enzyme cocktail® , 1 kg of the enzyme cocktail containing the activities of phytase 1,000,000 units, amylase 5,000,000 units, xylanase 3,500,000 units, beta-glucanase 2,000,000 units, cellulase 1,500,000 units, pectinase 1,000,000 units and mannanase 800,000 units; 500 g/t of feed, at a level 0.05% in the diets, respectively. Pigs were raised in individual metabolism cages. Faeces and urine samples were collected 4 times a day for 5 days for data collection. The results showed that the nutrient digestibility percentage of dry matter, crude protein, crude fat, ash, nitrogen-free extract, blood urea nitrogen, digestible energy (kcal/kg and metabolizable energy (kcal/ kg were not significantly different (P>0.05 in pigs fed with different diets. However, pigs fed with 5, 10 and 15% dried coconut meal in the diet with an enzyme cocktail® at a level 0.05% had significantly (P0.05 from the other groups. Apparent biological values contrarily reduced (linear and quadratic, P<0.05 with increasing level of dried coconut meal in pig diets. In conclusion, our data indicate that pigs fed with 5% dried coconut meal in a diet with addition of an enzyme cocktail at a level of 0.05% can show obviously increasing the highest digestibility of crude fiber (79.25% without impairing nutrient digestibility.

  19. Dry Eye as a Mucosal Autoimmune Disease

    Science.gov (United States)

    Stern, Michael E.; Schaumburg, Chris S.; Pflugfelder, Stephen C.

    2013-01-01

    Dry eye is a common ocular surface inflammatory disease that significantly affects quality of life. Dysfunction of the lacrimal function unit (LFU) alters tear composition and breaks ocular surface homeostasis, facilitating chronic inflammation and tissue damage. Accordingly, the most effective treatments to date are geared towards reducing inflammation and restoring normal tear film. The pathogenic role of CD4+ T cells is well known, and the field is rapidly realizing the complexity of other innate and adaptive immune factors involved in the development and progression of disease. The data support the hypothesis that dry eye is a localized autoimmune disease originating from an imbalance in the protective immunoregulatory and proinflammatory pathways of the ocular surface. PMID:23360156

  20. Dry aging of beef; Review.

    Science.gov (United States)

    Dashdorj, Dashmaa; Tripathi, Vinay Kumar; Cho, Soohyun; Kim, Younghoon; Hwang, Inho

    2016-01-01

    The present review has mainly focused on the specific parameters including aging (aging days, temperature, relative humidity, and air flow), eating quality (flavor, tenderness and juiciness), microbiological quality and economic (shrinkage, retail yields and cost) involved beef dry aging process. Dry aging is the process where beef carcasses or primal cuts are hanged and aged for 28 to 55 d under controlling environment conditions in a refrigerated room with 0° to 4 °C and with relative humidity of 75 to 80 %. However there are various opinions on dry aging procedures and purveyors of such products are passionate about their programs. Recently, there has been an increased interest in dry aging process by a wider array of purveyors and retailers in the many countries. Dry aging process is very costly because of high aging shrinkage (6 to15 %), trims loss (3 to 24 %), risk of contamination and the requirement of highest grades meat with. The packaging in highly moisture-permeable bag may positively impact on safety, quality and shelf stability of dry aged beef. The key effect of dry aging is the concentration of the flavor that can only be described as "dry-aged beef". But the contribution of flavor compounds of proteolysis and lipolysis to the cooked dry aged beef flavor is not fully known. Also there are limited scientific studies of aging parameters on the quality and palatability of dry aged beef.

  1. Dry ice blasting

    Science.gov (United States)

    Lonergan, Jeffrey M.

    1992-04-01

    As legal and societal pressures against the use of hazardous waste generating materials has increased, so has the motivation to find safe, effective, and permanent replacements. Dry ice blasting is a technology which uses CO2 pellets as a blasting medium. The use of CO2 for cleaning and stripping operations offers potential for significant environmental, safety, and productivity improvements over grit blasting, plastic media blasting, and chemical solvent cleaning. Because CO2 pellets break up and sublime upon impact, there is no expended media to dispose of. Unlike grit or plastic media blasting which produce large quantities of expended media, the only waste produced by CO2 blasting is the material removed. The quantity of hazardous waste produced, and thus the cost of hazardous waste disposal is significantly reduced.

  2. Drying of latex films and coatings: Reconsidering the fundamental mechanisms

    DEFF Research Database (Denmark)

    Kiil, Søren

    2006-01-01

    ), latex particle size (500-600 nm), initial polymer volume concentration (19-47 vol.%), and molecular weight of latex polymer (not quantified). Simulations also demonstrate that the transition from a constant to a falling drying rate in all cases takes place when the polymer volume concentration...

  3. Characterization of spray dried bioadhesive metformin microparticles for oromucosal administration

    DEFF Research Database (Denmark)

    Sander, Camilla; Madsen, Katrine Dragsbæk; Hyrup, Birgitte

    2013-01-01

    delivery systems are considered a promising approach as they facilitate a close contact between the drug and the oral mucosa. In this study, bioadhesive chitosan-based microparticles of metformin hydrochloride were prepared by spray drying aqueous dispersions with different chitosan:metformin ratios...... and chitosan grades with increasing molecular weights. A recently developed ex vivo flow retention model with porcine buccal mucosa was used to evaluate the bioadhesive properties of spray dried microparticles. An important outcome of this study was that microparticles with the desired metformin content could...... be prepared and analyzed using the ex vivo retention model. We observed an increase in metformin retention on porcine mucosa with increasing chitosan:metformin ratios, while no effect of increasing the chitosan molecular weight was found. Rheological characterization of feeds for spray drying was performed...

  4. Dry powder segregation and flowability: Experimental and numerical studies

    Science.gov (United States)

    Ely, David R.

    Dry powder blending is a very important industrial and physical process used in the production of numerous pharmaceutical dosage forms such as tablets, capsules, and dry powder aerosols. Key aspects of this unit operation are process monitoring and control. Process control is particularly difficult due to the complexity of particle-particle interactions, which arise from the adhesion/cohesion characteristics of interfaces and morphological characteristics such as particle size, shape, and dispersity. The effects of such characteristics need to be understood in detail in order to correlate individual particle properties to bulk powder properties. The present dissertation numerically and experimentally quantifies the mixing process to rationalize particle-particle interactions. In particular, near infrared spectroscopy (NIRS) was used to non-invasively characterize in real-time the blending processes and thus investigate the dynamics of blending under different operating conditions. A novel image analysis technique was developed to quantify the scale of segregation from images obtained non-destructively via near infrared chemical imaging (NIR-CI). Although NIR-CI data acquisition times are too long for real-time data collection, NIR-CI has an advantage, in that it provides the spatial distribution of the drug. Therefore, NIRS and NIR-CI are complementary techniques for investigating the complex process of blending dry powders and assessing end-product quality. Additionally, the discrete element method was used to investigate the effect of powder cohesion on the packing fraction. Simulations indicated an exponential relationship between the random loose packing fraction and cohesive forces. Specifically, the packing fraction decreased asymptotically with increased ratio of cohesive force to particle weight. Thus, increasing this force ratio above a critical value has negligible impact on the packing fraction. Such result directly impacts the Hausner ratio flowability

  5. Production of high molecular weight polylactic acid

    Science.gov (United States)

    Bonsignore, Patrick V.

    1995-01-01

    A degradable high molecular weight poly(lactic acid). A poly(lactic acid) has a terminal end group of one of carboxyl or hydroxyl groups with low molecular weight poly(lactic acid) units coupled with linking agents of di-isocyanates, bis-epoxides, bis-oxazolines and bis-ortho esters. The resulting high molecular weight poly(lactic acid) can be used for applications taking advantage of the improved physical properties.

  6. Clarifying atomic weights: A 2016 four-figure table of standard and conventional atomic weights

    Science.gov (United States)

    Coplen, Tyler B.; Meyers, Fabienne; Holden, Norman E.

    2017-01-01

    To indicate that atomic weights of many elements are not constants of nature, in 2009 and 2011 the Commission on Isotopic Abundances and Atomic Weights (CIAAW) of the International Union of Pure and Applied Chemistry (IUPAC) replaced single-value standard atomic weight values with atomic weight intervals for 12 elements (hydrogen, lithium, boron, carbon, nitrogen, oxygen, magnesium, silicon, sulfur, chlorine, bromine, and thallium); for example, the standard atomic weight of nitrogen became the interval [14.00643, 14.00728]. CIAAW recognized that some users of atomic weight data only need representative values for these 12 elements, such as for trade and commerce. For this purpose, CIAAW provided conventional atomic weight values, such as 14.007 for nitrogen, and these values can serve in education when a single representative value is needed, such as for molecular weight calculations. Because atomic weight values abridged to four figures are preferred by many educational users and are no longer provided by CIAAW as of 2015, we provide a table containing both standard atomic weight values and conventional atomic weight values abridged to four figures for the chemical elements. A retrospective review of changes in four-digit atomic weights since 1961 indicates that changes in these values are due to more accurate measurements over time or to the recognition of the impact of natural isotopic fractionation in normal terrestrial materials upon atomic weight values of many elements. Use of the unit “u” (unified atomic mass unit on the carbon mass scale) with atomic weight is incorrect because the quantity atomic weight is dimensionless, and the unit “amu” (atomic mass unit on the oxygen scale) is an obsolete term: Both should be avoided.

  7. Dried fruit and dental health.

    Science.gov (United States)

    Sadler, Michèle Jeanne

    2016-12-01

    A comprehensive review of the literature has found that the common perceptions that dried fruits are "sticky", adhere to teeth, and are detrimental to dental health on account of their sugar content are based on weak evidence. There is a lack of good quality scientific data to support restrictive advice for dried fruit intake on the basis of dental health parameters and further research is required. A number of potentially positive attributes for dental health, such as the need to chew dried fruits which encourages salivary flow, and the presence of anti-microbial compounds and of sorbitol, also require investigation to establish the extent of their effects and whether they balance against any potentially negative attributes of dried fruit. Advice on dried fruit consumption should also take account of the nutritional benefits of dried fruit, being high in fibre, low in fat and containing useful levels of micronutrients.

  8. Pediatricians' weight assessment and obesity management practices.

    Science.gov (United States)

    Huang, Jeannie S; Donohue, Michael; Golnari, Golnaz; Fernandez, Susan; Walker-Gallego, Edward; Galvan, Kate; Briones, Christina; Tamai, Jennifer; Becerra, Karen

    2009-03-05

    Clinician adherence to obesity screening guidelines from United States health agencies remains suboptimal. This study explored how personal and career demographics influence pediatricians' weight assessment and management practices. A web-based survey was distributed to U.S. pediatricians. Respondents were asked to identify the weight status of photographed children and about their weight assessment and management practices. Associations between career and personal demographic variables and pediatricians' weight perceptions, weight assessment and management practices were evaluated using univariate and multivariate modeling. 3,633 pediatric medical providers correctly identified the weight status of children at a median rate of 58%. The majority of pediatric clinicians were white, female, and of normal weight status with more than 10 years clinical experience. Experienced pediatric medical providers were less likely than younger colleagues to correctly identify the weight status of pictured children and were also less likely to know and use BMI criteria for assessing weight status. General pediatricians were more likely than subspecialty practitioners to provide diverse interventions for weight management. Non-white and Hispanic general practitioners were more likely than counterparts to consider cultural approaches to weight management. Pediatricians' perceptions of children's weight and their weight assessment and management practices are influenced by career and personal characteristics. Objective criteria and clinical guidelines should be uniformly applied by pediatricians to screen for and manage pediatric obesity.

  9. Efeito do alumínio sobre o crescimento de raízes, peso seco da parte aérea e raízes de diferentes cultivares de soja Effect of aluminum on root growth, dry matter weight of the above ground parts and roots of soybeans

    Directory of Open Access Journals (Sweden)

    Hipolito Assunção Antonio Mascarenhas

    1984-01-01

    Full Text Available Foram instalados dois experimentos preliminares, em solução nutritiva, para avaliar a tolerância da soja ao alumínio. No primeiro, foram testados os cultivares Cristalina e UFV-1, utilizando-se os teores 0, 5, 10 e 20mg/litro de Al. Esses níveis foram muito altos e reduziram drasticamente o comprimento das raízes primarias das plântulas após sete dias de crescimento. Com base nesses dados, outro experimento foi instalado, testando os cultivares Lee, Bragg, Cristalina e UFV-1. a 0, 1, 2 e 4mg/litro de Al. Os resultados mostraram que o comprimento das raízes primárias das plântulas foi melhor parâmetro do que o peso seco da parte aérea ou das raízes, para avaliar tolerância de soja ao alumínio. O nível de 1mg/litro na solução foi suficiente para separar os cultivares susceptíveis e tolerantes, enquanto os níveis de 2 e 4mg/litro causaram drástica redução do comprimento de raiz primária das plântulas de todos os cultivares. Nessas condições, 'Lee' e 'Cristalina' mostraram ser tolerantes enquanto o 'Bragg' se apresentou intermediário e o 'UFV-1' foi o mais susceptível entre eles. Os cultivares tolerantes revelaram tendência de acumular menores teores de Al na parte aérea, em comparação com os demais.Two experiments were conducted in nutrient solution to study the level of Al necessary to separate tolerant cultivars from the susceptible. In the first experiment the levels of Al were 0, 5, 10 and 20mg/l and two cultivars Cristalina and UFV-1 were studied. These levels were found to be too high as they had drastic effect on the primary roots after 7 days of transplanting. Based on this data another experiment was conducted using 0, 1, 2 and 4mg/l of Al and using cultivars Lee, Bragg, Cristalina and UFV-1. The results showed that the length of the primary root was the best parameter as compared with dry weight of the above ground parts and roots to evaluate tolerance of soybeans to Al. The level of 1mg/l was adequate to

  10. Solar drying of West Indian ginger (Zingiber officinale Roscoe) rhizome using a wire basket dryer

    Energy Technology Data Exchange (ETDEWEB)

    Balladin, D.A.; Headley, O. [University of the West Indies (Barbados). Dept. of Chemistry; Chang Yen, I. [University of the West Indies, St. Augustine (Trinidad and Tobago). Dept. of Chemistry; McGaw, D.R. [University of the West Indies, St. Augustine (Trinidad and Tobago). Dept. of Chemical Engineering

    1996-09-01

    A wire basket dryer (1.8 m x 0.9 m x 0.2 m) was used to dry sliced (0.15 cm) West Indian ginger (Zingiber officinale Roscoe) rhizome to an acceptable moisture content of 10.2% (dry weight basis) over a 3 day period. The optimum charge size was 14.97 kg, with a packing density of 462.04 kg m{sup -3} and a specific drying rate of 0.446 h{sup -1}. The quantities (determined by high-pressure liquid chromatography) of the main pungent principles (ginerol and shogaol) extracted from fresh, non-steam-distilled solar-dried and steam-distilled solar-dried ginger rhizomes showed increases of 0.068, 0.46 and 0.67 g [per 100 g (dry weight basis)], respectively, with a decrease in the oleoresin quality (reflected in pungency profile) of the same order. (author)

  11. 花椒麻度分级的改良斯科维尔指数法建立研究%A New Scoville Heat Unit (SHU) Method to Grade the Pungency Intensity of Dry Zanthoxylum bungeanum

    Institute of Scientific and Technical Information of China (English)

    张璐璐; 赵镭; 史波林; 汪厚银; 支瑞聪; 杨静; 解楠; 李志

    2014-01-01

    针对辣椒辣度的斯科维尔指数(Scoville heat units,SHU)法存在对基质影响因素的忽略及检验结果缺乏统计学依据的问题,通过将单样品评价改为样品液与制备基质对照液的成对比较检验,以及增加评价小组人数或评价轮次改进实验设计等,建立了与辣昧同为三叉神经感的花椒麻味感觉强度的间接测量方法——改良SHU法.应用新方法对花椒(Zanthoxylum bungeanum Maxim.)麻度进行测量与分级,并同时采用紫外分光光度计法对花椒中的酰胺含量进行了测定.结果表明:麻昧感觉强度值与花椒酰胺的物理含量之间具有一定的一致性,但对某些品种而言,相近的或者较低的花椒酰胺含量表现出更强的麻感,较高的酰胺含量却能表现出较低的麻感.说明,花椒麻昧感觉强度不仅与其所含的花椒酰胺总含量相关,也与花椒酰胺的构成及其结构相关.该方法的建立对花椒麻度相关研究以及应用麻度作为核心指标进行花椒及其制品质量评价与控制具有重要的理论和实践意义.

  12. 干气制氢装置低负荷运行时的操作优化%Operation optimization for hydrogen generation unit from dry gas at low load

    Institute of Scientific and Technical Information of China (English)

    王辉; 常永胜

    2012-01-01

    The situation of low load operation of 15 000 m3/h hydrogen generation unit in Qingdao Petrochemical Company was introduced, and the optimized measures on operation parameters and operation method proposed. The prominent problem at low load operation was the heterogeneous distribution and bias flow of medium in reformer tubes. For this reason, measures were adopted including reducing the space velocity and inlet temperature in hydroge-nator, improving the water to carbon ratio in reformer and increasing the hydrogen level added to enhancethe medium flow rate and carry away the excess heat in reformer tubes. In addition, the hydrogen content in the desorbed gas from pressure swing adsorption ( PSA ) should be controlled effectively, the water from middle - temperature shift gas needed to be e-mitted in time, the rising or dropping of load should be kept at a narrow range.%介绍了中国石化青岛石化公司15 000 m3/h干气制氢装置低负荷运行的生产情况,并从操作参数、操作方式等方面提出了一些优化措施.低负荷运行最突出的问题就是转化炉管内介质分布不均匀,容易形成偏流.须采取降低加氢反应器空速和入口温度,提高转化炉水碳比,加大配氢量等措施,以增加转化炉管内介质流量,带走炉管内过多的热量.另外,还应有效控制变压吸附(PSA)解吸气中的氢气含量,适时对中变气进行切水操作,保持生产负荷提降量平稳.

  13. Thyroid and Weight

    Science.gov (United States)

    ... weight) weight loss. As in the treatment with hyperthyroidism, treatment of the abnormal state of hypothyroidism with thyroid ... Goiter Graves’ Disease Graves’ Eye Disease Hashimoto’s Thyroiditis Hyperthyroidism ... & Weight Thyroiditis Thyroid ...

  14. Weight Loss Surgery

    Science.gov (United States)

    Weight loss surgery helps people with extreme obesity to lose weight. It may be an option if you ... caused by obesity. There are different types of weight loss surgery. They often limit the amount of food ...

  15. Convective drying of sludge cake

    Science.gov (United States)

    Chen, Jianbo; Peng, Xiaofeng; Xue, Yuan; Lee, Duujong; Chu, Chingping

    2002-08-01

    This paper presented an experimental study on convective drying of waste water sludge collected from Beijing GaoBeiDian Sewage Treatment Plant, particularly on the correlation between the observed shrinkage dynamics of sludge cake and the drying curve. During the initial stage of drying the process resembles to that of a particulate bed, in which moisture diffuses and evaporates at the upper surface. Conventional drying theory assuming a diffusion-evaporating front interprets this period of drying. Consequently, owing to the very large shrinkage ratio of the dried cake, cracks emerges and propagates on and within the cake body, whence inducing evaporating channel that facilitates the water removal. This occurrence compensates the reduction of surface area for evaporation, whence extending the constant-rate period during the test. Afterwards, the cracks meet with each other and form isolated cake piles, while the subsequent drying occur mainly within these piles and the conventional theory fails. The transition between the drying on a plain cake layer and that on the isolated piles demonstrates the need to adopt distinct descriptions on these two regimes of drying for the sludge cake.

  16. grain size and heat source effect on the drying profile of cocoa bean ...

    African Journals Online (AJOL)

    eobe

    moisture loss was monitored, humidity and temperature of the drying were determined ... under most conditions in developing economies. ... By integrating between limits M(r,0) =M, initial ... balance, the difference in weight was used to.

  17. EffeCts of Direct sUn Drying of Maize Grains on Perforated and ...

    African Journals Online (AJOL)

    Abstract. Sun drying ofmqize grains on unperforated and perforatedsurfaceswas ... and 40 mm in the field The response variables measured were weight loss at all depths and moisture con- ..... tent (on milled grains and on whole grains): The.

  18. Carrageenan drying with dehumidified air: drying characteristics and product quality

    NARCIS (Netherlands)

    Djaeni, M.; Sasongko, S.B.; Prasetyaningrum, Aji A A.A.; Jin, X.; Boxtel, van A.J.B.

    2012-01-01

    Applying dehumidified air is considered as an option to retain quality in carrageenan drying. This work concerns the effects of operational temperature, air velocity, and carrageenan thickness on the progress of drying and product quality when using dehumidified air. Final product quality and progre

  19. Effects of rapid weight loss and regain on body composition and energy expenditure.

    Science.gov (United States)

    Sagayama, Hiroyuki; Yoshimura, Eiichi; Yamada, Yosuke; Ichikawa, Mamiko; Ebine, Naoyuki; Higaki, Yasuki; Kiyonaga, Akira; Tanaka, Hiroaki

    2014-01-01

    Weight-classified athletes need an energy intake plan to accomplish target weight reduction. They have to consider body composition and energy metabolism during rapid weight loss followed by rapid weight regain to achieve their energy intake plan. We investigated the effects of rapid weight loss, followed by weight regain, on body composition and energy expenditure. Ten weight-classified athletes were instructed to reduce their body weight by 5% in 7 days. Following the weight loss, they were asked to try to regain all of their lost weight with an ad libitum diet for 12 h. Food intake was recorded during the baseline, weight loss, and regain periods. Fat mass, total body water, and fat-free dry solids were estimated by underwater weighing and stable isotope dilution methods. A three-component model was calculated using Siri's equation. Basal and sleeping metabolic rates were measured by indirect calorimetry. Body composition and energy expenditure were measured before and after weight loss and after weight regain. Body weight, total body water, and fat-free dry solids were decreased after the weight loss period but recovered after weight regain (p weight loss but recovered after weight regain. Changes in total body water greatly affect body weight during rapid weight loss and regain. In addition, rapid weight loss and regain did not greatly affect the basal metabolic rate in weight-classified athletes.

  20. Spray Drying of High Sugar Content Foods: Improving of Product Yield and Powder Properties

    OpenAIRE

    Mehmet Koç; Figen Kaymak-Ertekin

    2016-01-01

    Spray drying is the most preferred drying method to produce powdered food in the food industry and it is also widely used to convert sugar-rich liquid foods to a powder form. During and/or after spray drying process of sugar-rich products, undesirable situation was appeared such as stickiness, high moisture affinity (hygroscopicity) and low solubility due to low molecular weight monosaccharides that found naturally in the structure. The basis of these problems was formed by low glass transiti...

  1. Overview of new techniques for drying biological materials with emphasis on energy aspects

    Directory of Open Access Journals (Sweden)

    G.S.V. Raghavan

    2005-06-01

    Full Text Available With increasing concern about environmental degradation, it is desirable to decrease energy consumption in all sectors. Drying has been reported to account for anywhere from 12 to 20% of the energy consumption in the industrial sector. Drying processes are one of the most energy intensive unit operations. There are a number of approaches to reduce energy consumption in dryers. This paper reviews some novel strategies used to decrease energy consumption in drying operations. Drying conditions can be modified or the drying equipments can be modified to increase overall efficiencies. Hybrid drying techniques can also be used, such as combining vacuum or convective drying with electro-technologies (microwave, radio frequency, infrared heating. There is much debate on how to define drying and energy efficiencies. Some techniques to determine these efficiencies can be misleading when the goal is to take a holistic approach to determining energy consumption.

  2. Effects of composite surface coating and pre-drying on the properties of kabanosy dry sausage.

    Science.gov (United States)

    Tyburcy, Andrzej; Kozyra, Daniel

    2010-10-01

    Coating of dry sausages with renewable materials could be an alternative to vacuum packaging. In this study kabanosy dry sausage was coated with a composite emulsion and stored for 7 or 15 days at 4-6 degrees C. Effects of different emulsion formulas (0.5 or 1% w/w of kappa-carrageenan and 5 or 10% w/w of glycerol) and pre-drying of coated sausages (at 50 degrees C for 1.5h) were investigated. Carrageenan concentration had a significant effect (Pcoatings. At both glycerol concentration levels, coatings had no visible cracks and were easily removed from the sausage surface after 7 and 15 days of storage. The colour values of coatings (L*, a*, and b*) changed along with the decreasing water activity during storage. Pre-drying of coated sausages reduced peeled product weight loss after storage. The financial analysis showed that among coatings tested the best proved to be the emulsion containing (w/w): 5% glycerol, 5% gelatin, 0.5% carrageenan, 20% lard, 20% beeswax, and 50% water. Copyright (c) 2010 The American Meat Science Association. Published by Elsevier Ltd. All rights reserved.

  3. Staying dry under water

    Science.gov (United States)

    Jones, Paul; Cruz-Chu, Eduardo; Megaridis, Constantine; Walther, Jens; Koumoutsakos, Petros; Patankar, Neelesh

    2012-11-01

    Lotus leaves are known for their non-wetting properties due to the presence of surface texture. The superhydrophobic behavior arises because of the prevention of liquid water from entering the pores of the roughness. Present superhydrophobic materials rely on air trapped within the surface pores to avoid liquid permeation. This is typically unsustainable for immersed bodies due to dissolution of the air, especially under elevated pressures. Here, molecular dynamics simulations are used to demonstrate the non-wetting behavior of an immersed ten-nanometer pore. This is accomplished by establishing thermodynamically sustained vapor pockets of the surrounding liquid medium. Over 300,000 atoms were used to construct the nanopore geometry and simulate SPC/E water molecules. Ambient pressure was varied along two isotherms (300 K, and 500 K). This approach for vapor-stabilization could offer valuable guidance for maintaining surfaces dry even in a submerged state without relying on trapped air. The approach may be extended to control general phase behavior of water adjacent to textured surfaces. ISEN support is gratefully acknowledged.

  4. Forward Osmosis Brine Drying

    Science.gov (United States)

    Flynn, Michael; Shaw, Hali; Hyde, Deirdre; Beeler, David; Parodi, Jurek

    2015-01-01

    The Forward Osmosis Brine Drying (FOBD) system is based on a technique called forward osmosis (FO). FO is a membrane-based process where the osmotic potential between brine and a salt solution is equalized by the movement of water from the brine to the salt solution. The FOBD system is composed of two main elements, the FO bag and the salt regeneration system. This paper discusses the results of testing of the FO bag to determine the maximum water recovery ratio that can be attained using this technology. Testing demonstrated that the FO bag is capable of achieving a maximum brine water recovery ratio of the brine of 95%. The equivalent system mass was calculated to be 95 kg for a feed similar to the concentrated brine generated on the International Space Station and 86 kg for an Exploration brine. The results have indicated that the FOBD can process all the brine for a one year mission for between 11% to 10% mass required to bring the water needed to make up for water lost in the brine if not recycled. The FOBD saves 685 kg and when treating the International Space Station brine and it saves 829 kg when treating the Exploration brine. It was also demonstrated that saturated salt solutions achieve a higher water recovery ratios than solids salts do and that lithium chloride achieved a higher water recovery ratio than sodium chloride.

  5. Sessile nanofluid droplet drying.

    Science.gov (United States)

    Zhong, Xin; Crivoi, Alexandru; Duan, Fei

    2015-03-01

    Nanofluid droplet evaporation has gained much audience nowadays due to its wide applications in painting, coating, surface patterning, particle deposition, etc. This paper reviews the drying progress and deposition formation from the evaporative sessile droplets with the suspended insoluble solutes, especially nanoparticles. The main content covers the evaporation fundamental, the particle self-assembly, and deposition patterns in sessile nanofluid droplet. Both experimental and theoretical studies are presented. The effects of the type, concentration and size of nanoparticles on the spreading and evaporative dynamics are elucidated at first, serving the basis for the understanding of particle motion and deposition process which are introduced afterward. Stressing on particle assembly and production of desirable residue patterns, we express abundant experimental interventions, various types of deposits, and the effects on nanoparticle deposition. The review ends with the introduction of theoretical investigations, including the Navier-Stokes equations in terms of solutions, the Diffusion Limited Aggregation approach, the Kinetic Monte Carlo method, and the Dynamical Density Functional Theory. Nanoparticles have shown great influences in spreading, evaporation rate, evaporation regime, fluid flow and pattern formation of sessile droplets. Under different experimental conditions, various deposition patterns can be formed. The existing theoretical approaches are able to predict fluid dynamics, particle motion and deposition patterns in the particular cases. On the basis of further understanding of the effects of fluid dynamics and particle motion, the desirable patterns can be obtained with appropriate experimental regulations.

  6. Effect of the microhardness difference between base metal and bionic coupling unit on wear resistance of gray cast iron

    Science.gov (United States)

    Pang, Zuobo; Zhou, Hong; Chang, Fang; Zhang, Peng; Cong, Dalong; Meng, Chao; Wang, Chuanwei; Ren, Luquan

    2015-12-01

    In order to improve the wear resistance of gray cast iron guide rail, the samples with different microhardness difference between bionic coupling units and base metal were manufactured by laser surface remelting. Wear behavior of gray cast iron with bionic coupling units has been studied under dry sliding condition at room temperature using a homemade liner reciprocating wear testing machine. The wear resistance was evaluated by means of weight loss measurement and wear morphology. The results indicated that when the microhardness difference is 561 HV0.2, the wear resistance of sample is the best.

  7. Effects of immunological castration and distiller's dried grains with solubles on carcass cutability and commercial bacon slicing yields of barrows slaughtered at two time points.

    Science.gov (United States)

    Tavárez, M A; Bohrer, B M; Asmus, M D; Schroeder, A L; Matulis, R J; Boler, D D; Dilger, A C

    2014-07-01

    Male pigs were randomly assigned to a castration method at birth and allotted to 48 pens (28 pigs/pen). Physically castrated (PC) barrows were castrated at 2 d of age; immunologically castrated (IC) barrows were administered Improvest (GnRF analog diphtheria toxoid conjugate; Zoetis, Kalamazoo, MI) at 16 and 20 wk of age. Distiller's dried grains with solubles (DDGS) feeding strategies included either 0% DDGS (control), 30% DDGS (30% DDGS) fed from 6 wk of age to slaughter, or 30% DDGS fed from 6 wk of age to second dose of Improvest and then fed 0% DDGS until slaughter (withdrawal). Four barrows closest to the median pen weight at 4.5 wk after second dose were selected for evaluation; two were randomly selected and slaughtered at 5 wk and the other two at 7 wk after second dose. Data from each slaughter time were analyzed independently as a 2 × 3 factorial design with pen as the experimental unit. At 5 wk after second dose, bone-in lean cutting yields were 2.63% units greater (P Bacon slicing yields (percentage of green weight) were 6.10% units less (P Bacon slicing yields (percentage of green weight) were 4.27% units less (P = 0.05) in IC compared with PC. These data suggested that while bacon slicing yield was reduced in IC barrows fed control and 30% DDGS compared with PC barrow counterparts, withdrawal of DDGS improved bacon slicing yields of IC barrows.

  8. Weight loss, weight regain and bone health.

    Science.gov (United States)

    Pines, Amos

    2012-08-01

    The ideal body image for women these days is being slim but, in the real world, obesity becomes a major health problem even in the developing countries. Overweight, but also underweight, may have associated adverse outcomes in many bodily systems, including the bone. Only a few studies have investigated the consequences of intentional weight loss, then weight regain, on bone metabolism and bone density. It seems that the negative impact of bone loss is not reversed when weight partially rebounds following the end of active intervention programs. Thus the benefits and risks of any weight loss program should be addressed individually, and monitoring of bone parameters is recommended.

  9. Viscous property of dried clay

    Institute of Scientific and Technical Information of China (English)

    XU Li-sheng; LI Jian-zhong

    2006-01-01

    One dimensional and triaxial compression tests of air-dried and oven-dried Fujinomori clay and Pisa clay were carried out. Water content is less than 4.5 % and 1.0% for air-dried and oven-dried clay specimens, respectively. In all tests, axial strain rate was changed stepwise many times and drained creep tests were performed several times during monotonic loading at a constant strain rate. Global unloading (and also reloading in some tests) was applied during which creep loading tests were performed several times. Cyclic loading with small stress amplitude and several cycles was also performed to calculate the modulus of elasticity of the clay in tests. Local displacement transducer was used in triaxial compression test to increase measuring accuracy of axial strain. The results show that air-dried and oven-dried clay have noticeable viscous properties; during global unloading, creep deformation changes from positive to negative, i.e. there exist neutral points (zero creep deformation or no creep deformation point) in global unloading part of strain-stress curve; viscous property of Fujinomori clay decreases when water content decreases, i.e. viscous property of air-dried Fujinomori clay is more significant than that of oven-dried Fujinomori clay.

  10. Microwave Drying of Moist Coals

    Science.gov (United States)

    Salomatov, Vl. V.; Karelin, V. A.; Sladkov, S. O.; Salomatov, Vas. V.

    2017-03-01

    Physical principles and examples of practical implementation of drying large bodies of coal by microwave radiation are considered. It is shown that energy consumption in microwave drying of brown coals decreases to 1.5-1.8 (kW·h)/ kg as compared with traditional types of drying, for which the expenditures of energy amount to 3.0 (kW·h)/kg. In using microwave drying, the technological time of drying decreases to 4 h, whereas the time of convective drying, with other things being equal, comes to 8-20 h. Parallel with microwave radiation drying, grinding of a fuel takes place, as well as entrainment of such toxic and ecologically harmful elements as mercury, chlorine, phosphorus, sulfur, and nitrogen. An analysis of the prospects of using a microwave energy for drying coal fuel has shown that microwave radiation makes it possible to considerably economize in energy, increase explosional safety, improve the ecological situation, and reduce the metal content and overall dimensions of the equipment.

  11. Dry release of suspended nanostructures

    DEFF Research Database (Denmark)

    Forsén, Esko Sebastian; Davis, Zachary James; Dong, M.;

    2004-01-01

    A dry release method for fabrication of suspended nanostructures is presented. The technique has been combined with an anti-stiction treatment for fabrication of nanocantilever based nanoelectromechanical systems (NEMS). The process combines a dry release method, using a supporting layer of photo......A dry release method for fabrication of suspended nanostructures is presented. The technique has been combined with an anti-stiction treatment for fabrication of nanocantilever based nanoelectromechanical systems (NEMS). The process combines a dry release method, using a supporting layer......, the technique enables long time storage and transportation of produced devices without the risk of stiction. By combining the dry release method with a plasma deposited anti-stiction coating both fabrication induced stiction, which is mainly caused by capillary forces originating from the dehydration...

  12. Proven Weight Loss Methods

    Science.gov (United States)

    Fact Sheet Proven Weight Loss Methods What can weight loss do for you? Losing weight can improve your health in a number of ways. ... limiting calories) usually isn’t enough to cause weight loss. But exercise plays an important part in helping ...

  13. Experimental Analysis of Open, Simple and Modified Greenhouse Dryers for Drying Potato Flakes Under Forced Convection

    Directory of Open Access Journals (Sweden)

    Tanuj Kumar Sahu

    2016-07-01

    Full Text Available Drying using burning of fossil fuels and open sun drying are traditional way to dry crops, fruits, vegetables etc. But there are some disadvantages associated with them such as crops are affected by dirt and other impurities. To overcome the problems associated with open sun drying and drying using burning of fossil fuels, solar greenhouse drying is found out to be the best alternative. In present work the performance of simple and modified greenhouse dryer is evaluated and effort is made to increase the drying rate of greenhouse dryer which has been achieved in modified greenhouse dryer with inclined roof. Total weight of potato flakes was reduced by 80.1 % in modified greenhouse dryer in just 5 hours whereas it took 6 hours in simple greenhouse dryer for achieving nearly same values.

  14. Drying Characteristics of Garcinia atroviridis

    Directory of Open Access Journals (Sweden)

    Waigoon RITTIRUT

    2006-01-01

    Full Text Available Some physical and chemical properties of fresh garcinia fruits are reported. The most suitable drying conditions for garcinia material in a tray dryer based on the final moisture content were determined by extensive testing. It was found that for the material thickness of 2, 4 and 6 mm, a temperature of 55 °C and air velocity of 1.2 m/s are suitable for drying. The most suitable time where the final moisture content met the commercial standard was found to be 199, 256 and 427 min, respectively. The higher the temperature, the shorter the drying time. It was also observed that the suitable drying time for 2-mm thick material and air velocity of 1.2 m/s was 199, 159 and 99 min for drying temperature of 55, 65 and 75 °C, respectively. Drying characteristics are also reported. Most of the drying rate curves appear in a falling rate period except at low temperature and low velocity of operation parameters i.e. 55 °C and 0.5 m/s for 4-mm thick material, where the constant drying rate is approximately 0.09 kg water/min.m2. The sorption isotherm is sigmoidal shape at 30 °C and monolayer moisture content is 14.78 kg water/100 kg dry solid. Soaking material in 1.5 and 3.0 %w/w sodium chloride did not affect the drying rate. Effective moisture diffusivities were evaluated to be  5.57´10-10, 6.94´10-10 and 1.11´10-9 m2/s at temperatures 55, 65 and 75 °C, respectively.

  15. Space and Industrial Brine Drying Technologies

    Science.gov (United States)

    Jones, Harry W.; Wisniewski, Richard S.; Flynn, Michael; Shaw, Hali

    2014-01-01

    This survey describes brine drying technologies that have been developed for use in space and industry. NASA has long considered developing a brine drying system for the International Space Station (ISS). Possible processes include conduction drying in many forms, spray drying, distillation, freezing and freeze drying, membrane filtration, and electrical processes. Commercial processes use similar technologies. Some proposed space systems combine several approaches. The current most promising candidates for use on the ISS use either conduction drying with membrane filtration or spray drying.

  16. Etiology, prevalence, and treatment of dry eye disease

    Directory of Open Access Journals (Sweden)

    Johnny L Gayton

    2009-07-01

    Full Text Available Johnny L GaytonEyesight Associates, Warner Robins, GA, USAPurpose: This review article examines the prevalence, etiology, and current therapies of dry eye disease, with special focus on postmenopausal women.Method: A systematic literature search utilizing MEDLINE was conducted to identify peer-reviewed articles related to dry eye published prior to September 2008. The terms “dry eye” and “women” were searched in combination with one or more of the following words or phrases: prevalence, postmenopausal, etiology, risk factors, therapy, medications, surgery, tear film, and quality of life. Articles were selected based on their direct applicability to the subject matter. A manual search was also conducted based on citations in the published literature.Results: Epidemiologic studies identified prevalence rates ranging from 7% in the United States to 33% in Taiwan and Japan. Risk factors include advanced age, female sex, smoking, extreme heat or cold weather conditions, low relative humidity, use of video display terminals, refractive surgery, contact lens wear, and certain medications.Conclusion: The last decade has brought about a better understanding of the etiology of dry eye disease. New therapies that can alleviate the signs and symptoms of dry eye disease and, consequently, improve the quality of life of dry eye patients are available in the market.Keywords: dry eye disease, etiology, prevalence, postmenopausal women

  17. 77 FR 74452 - Bus Testing: Calculation of Average Passenger Weight and Test Vehicle Weight

    Science.gov (United States)

    2012-12-14

    ... passenger weight estimations then underway by the Federal Aviation Administration and the United States... Moving Ahead for Progress in the 21st Century Act (MAP-21) (Pub. L. 112-141). Section 20014 of...

  18. Drying of α-amylase by spray drying and freeze-drying - a comparative study

    Directory of Open Access Journals (Sweden)

    S. S. de Jesus

    2014-09-01

    Full Text Available This study is aimed at comparing two traditional methods of drying of enzymes and at verifying the efficiency of each one and their advantages and disadvantages. The experiments were performed with a laboratory spray dryer and freeze-dryer using α-amylase as the model enzyme. An experimental design in star revealed that spray drying is mainly influenced by the inlet air temperature and feed flow rate, which were considered to be the main factors influencing the enzymatic activity and water activity; the long period of material exposure to high temperatures causes a partial activity loss. In the experiments of freeze drying, three methods of freezing were used (freezer, acetone and dry ice, and liquid nitrogen and samples subsequently freeze-dried for times ranging between 0-24 hours. The product obtained from the two techniques showed high enzymatic activity and low water activity. For the drying of heat-resistant enzymes, in which the product to be obtained does not have high added value, spray drying may be more economically viable because, in the freeze drying process, the process time can be considered as a limiting factor when choosing a technique.

  19. Technological and practical challenges of dry powder inhalers and formulations

    NARCIS (Netherlands)

    Hoppentocht, M.; Hagedoorn, P.; Frijlink, H.W.; de Boer, A.H.

    2014-01-01

    In the 50 years following the introduction of the first dry powder inhaler to the market, several developments have occurred. Multiple-unit dose and multi-dose devices have been introduced, but first generation capsule inhalers are still widely used for new formulations. Many new particle engineerin

  20. Drying of thin colloidal films

    Science.gov (United States)

    Routh, Alexander F.

    2013-04-01

    When thin films of colloidal fluids are dried, a range of transitions are observed and the final film profile is found to depend on the processes that occur during the drying step. This article describes the drying process, initially concentrating on the various transitions. Particles are seen to initially consolidate at the edge of a drying droplet, the so-called coffee-ring effect. Flow is seen to be from the centre of the drop towards the edge and a front of close-packed particles passes horizontally across the film. Just behind the particle front the now solid film often displays cracks and finally the film is observed to de-wet. These various transitions are explained, with particular reference to the capillary pressure which forms in the solidified region of the film. The reasons for cracking in thin films is explored as well as various methods to minimize its effect. Methods to obtain stratified coatings through a single application are considered for a one-dimensional drying problem and this is then extended to two-dimensional films. Different evaporative models are described, including the physical reason for enhanced evaporation at the edge of droplets. The various scenarios when evaporation is found to be uniform across a drying film are then explained. Finally different experimental techniques for examining the drying step are mentioned and the article ends with suggested areas that warrant further study.

  1. No Heat Spray Drying Technology

    Energy Technology Data Exchange (ETDEWEB)

    Beetz, Charles [ZoomEssence, Inc., Hebron, KY (United States)

    2016-06-15

    No Heat Spray Drying Technology. ZoomEssence has developed our Zooming™ spray drying technology that atomizes liquids to powders at ambient temperature. The process of drying a liquid into a powder form has been traditionally achieved by mixing a heated gas with an atomized (sprayed) fluid within a vessel (drying chamber) causing the solvent to evaporate. The predominant spray drying process in use today employs air heated up to 400° Fahrenheit to dry an atomized liquid into a powder. Exposing sensitive, volatile liquid ingredients to high temperature causes molecular degradation that negatively impacts solubility, stability and profile of the powder. In short, heat is detrimental to many liquid ingredients. The completed award focused on several areas in order to advance the prototype dryer to a commercial scale integrated pilot system. Prior to the award, ZoomEssence had developed a prototype ‘no-heat’ dryer that firmly established the feasibility of the Zooming™ process. The award focused on three primary areas to improve the technology: (1) improved ability to formulate emulsions for specific flavor groups and improved understanding of the relationship of emulsion properties to final dry particle properties, (2) a new production atomizer, and (3) a dryer controls system.

  2. Cassava Sun Drying Performance on Various Surfaces and Drying ...

    African Journals Online (AJOL)

    a raw material in the production of starch, tapioca and snack foods ... The material was dried for 8 hours daily after which it was kept indoors overnight. The surface with .... statistical package (MS Office, 2007). .... preservation and marketing.

  3. Anti-freezing performance research of dry type shell-tube heat exchanger for air source heat pump water chiller-heater unit%空气源热泵冷(热)水机组用干式壳管换热器防冻性能研究

    Institute of Scientific and Technical Information of China (English)

    张龙爱; 陈忠杰; 王传华

    2012-01-01

    针对空气源热泵冷(热)水机组运行中可能出现的干式壳管换热器冻裂问题,分析其被冻裂的主要因素,并且对壳管换热器冻裂的关键因素——蒸发压力过低的原因进行分析.基于分析结果,对壳管换热器的设计进行改进,同时对低流量保护点进行试验验证.%Aiming at the frost-cracking problem of the dry type shell-tube heat exchanger for air source heat pump water chiller-heater unit, the main influencing factors are analyzed. The key reason of shell-tube heat exchanger frost-cracking is analyzed that is too low evaporating pressure. The design of shell-tube heat exchanger is improved based on the analysis results, and the limited flow rate for protection of flow switch is verified by the test.

  4. Worth its Weight in Gold: Product Weight, International Shipping, and Patterns of Trade

    OpenAIRE

    Ahmad Lashkaripour

    2015-01-01

    Trade theory relies heavily on the classic iceberg trade cost assumption, but empirical studies have generally rejected it. These studies, however, overlook variations in product weight. Utilizing detailed trade data, I show that unit weight varies widely even within narrowly defined categories, and increases systematically with unit value. I develop and estimate a model of international transportation that accommodates these patterns. Two remarkable results emerge: First, I find strong empir...

  5. EFFECT OF DRYING CONDITIONS ON MUSHROOM QUALITY

    Directory of Open Access Journals (Sweden)

    MANOJ KULSHRESHTHA

    2009-03-01

    Full Text Available Fluidized bed drying of mushroom was undertaken to study the drying characteristics and quality of the dried mushrooms. Drying was done at drying air temperatures of 50, 70, and 90oC and air velocities of 1.71 and 2.13 m/s. Two batch sizes, namely, 0.5 kg and 1 kg of sliced milky mushrooms were dried. Drying characteristics and the quality of dried mushrooms were analyzed. The results indicated that the drying time decreased only marginally with increase in air velocity. Drying air temperature of 50oC was better as it resulted in a dried product having better rehydration characteristics, lesser shrinkage and lighter color. Highest energy efficiency (79.74% was observed while drying a batch size of 1 kg at a drying air temperature of 50oC, using an air velocity of 1.7 m/s.

  6. Natural wind drying of willow stems

    NARCIS (Netherlands)

    Gigler, J.K.; Loon, van W.K.P.; Berg, van den J.V.; Sonneveld, C.; Meerdink, G.

    2000-01-01

    The process of natural wind drying of willow (Salix viminalis) stems in large piles was investigated. A simple drying model was developed for stems. Large-scale drying experiments were conducted and drying data were statistically analysed. Whether drying in a pile of willow stems was uniform was inv

  7. A Mathematical Model for Freeze-Drying

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Based on the experiments on freeze-drying carrot and potato slabs, the effects of some parameters, such as heating temperature and pressure on the freeze-drying process are examined. A simple model of freeze-drying is established to predict drying time and the mass variations of materials during the drying. The experimental results agree well with those calculated by the model.

  8. Composition, thermotropic properties, and oxidative stability of freeze-dried and spray-dried milk fat globule membrane isolated from cheese whey.

    Science.gov (United States)

    Zhu, Dan; Damodaran, Srinivasan

    2011-08-24

    The milk fat globule membrane (MFGM) was isolated from cheese whey using a recently developed novel method. The cheese-derived MFGM contained about 17-19% lipids and 65-70% protein on a dry weight basis. About 50% of the lipids in MFGM were phospholipids. Compositional analysis of the cheese whey-derived MFGM showed that it is a rich source of phosphatidylserine, sphingomyelin, and bioactive proteins CD36, butyrophilin, xanthine oxidase, and mucin 1. Utilization of MFGM in foods as a source of nutraceutical lipids depends on its oxidative stability. In this context, the impact of drying methods, namely, freeze-drying versus spray-drying, on the storage stability of MFGM was studied. Freeze-dried (FD) and spray-dried (SD) MFGM samples were morphologically very different when examined by light microscope: The thermotropic phase transition temperature (T(m)) of lipids in the FD-MFGM was 37.8 °C, and it was 48 °C in SD-MFGM. This 10 °C difference in T(m) indicated that the drying method altered the thermodynamic state of phospholipids in MFGM. At all storage temperatures studied, the zero-order rate constant of lipid oxidation, as measured by hexanal production, was 1-2 orders of magnitude greater in the spray-dried than in the freeze-dried MFGM. The results clearly indicated that the choice of drying method affects morphological characteristics, the T(m) and oxidative stability of phospholipids in MFGM.

  9. Performance of dairy females fed dried yeast from sugar cane

    Directory of Open Access Journals (Sweden)

    Marcia de Oliveira Franco

    2016-05-01

    Full Text Available This study was performed in order to evaluate the effect of dried yeast from sugar cane when replacing soybean meal in dairy heifers’ diets. Twenty-four heifers, with an initial body weight (BW of 178 kg, were distributed in a completely randomized design. The treatments were four levels of inclusion of dried yeast from sugar cane replacing to soybean meal (0, 33, 67 and 100% on a dry matter (DM basis. While there was no difference in DM, neutral detergent fiber (NDF, metabolizable energy or roughage intakes, the intakes of non-fiber carbohydrates and concentrate were increased. The crude protein intake decreased according to the dried yeast from sugar cane when replacing soybean meal. The digestibility coefficients of DM and NDF showed no difference. Replacement of soybean meal with dried yeast from sugar cane had no effect on performance, because average daily gain and body measurements studied were similar for all animals and inclusion levels. Soybean meal can be completely replaced with dried yeast from sugar cane in diets for growing dairy heifers without restrictions; this will not affect the intake, digestibility, physical development of animals or metabolization of protein compounds.

  10. Load beam unit replaceable inserts for dry coal extrusion pumps

    Science.gov (United States)

    Saunders, Timothy; Brady, John D.

    2012-11-13

    A track assembly for a particulate material extrusion pump according to an exemplary aspect of the present disclosure includes a link assembly with a roller bearing. An insert mounted to a load beam located such that the roller bearing contacts the insert.

  11. Sustaining dry surfaces under water

    DEFF Research Database (Denmark)

    Jones, Paul R.; Hao, Xiuqing; Cruz-Chu, Eduardo R.

    2015-01-01

    Rough surfaces immersed under water remain practically dry if the liquid-solid contact is on roughness peaks, while the roughness valleys are filled with gas. Mechanisms that prevent water from invading the valleys are well studied. However, to remain practically dry under water, additional...... mechanisms need consideration. This is because trapped gas (e.g. air) in the roughness valleys can dissolve into the water pool, leading to invasion. Additionally, water vapor can also occupy the roughness valleys of immersed surfaces. If water vapor condenses, that too leads to invasion. These effects have...... not been investigated, and are critically important to maintain surfaces dry under water.In this work, we identify the critical roughness scale, below which it is possible to sustain the vapor phase of water and/or trapped gases in roughness valleys – thus keeping the immersed surface dry. Theoretical...

  12. 10-minute consultation Dry mouth

    Institute of Scientific and Technical Information of China (English)

    Mark Taubert; Eleanor M R Davies; Ian Back

    2007-01-01

    @@ A 67 year old man presents with a six week history of dry mouth (xerostomia). He has prostate cancer, which has spread to his spine, and he takes opiates for pain relief. Recently, he started taking an antidepressant.

  13. Sustaining dry surfaces under water

    Science.gov (United States)

    Jones, Paul R.; Hao, Xiuqing; Cruz-Chu, Eduardo R.; Rykaczewski, Konrad; Nandy, Krishanu; Schutzius, Thomas M.; Varanasi, Kripa K.; Megaridis, Constantine M.; Walther, Jens H.; Koumoutsakos, Petros; Espinosa, Horacio D.; Patankar, Neelesh A.

    2015-08-01

    Rough surfaces immersed under water remain practically dry if the liquid-solid contact is on roughness peaks, while the roughness valleys are filled with gas. Mechanisms that prevent water from invading the valleys are well studied. However, to remain practically dry under water, additional mechanisms need consideration. This is because trapped gas (e.g. air) in the roughness valleys can dissolve into the water pool, leading to invasion. Additionally, water vapor can also occupy the roughness valleys of immersed surfaces. If water vapor condenses, that too leads to invasion. These effects have not been investigated, and are critically important to maintain surfaces dry under water. In this work, we identify the critical roughness scale, below which it is possible to sustain the vapor phase of water and/or trapped gases in roughness valleys - thus keeping the immersed surface dry. Theoretical predictions are consistent with molecular dynamics simulations and experiments.

  14. Dry skin - self-care

    Science.gov (United States)

    ... moisture Hot, dry air in desert environments Air conditioners that cool the air and remove moisture Taking ... scrubbing your skin. Shave right after bathing, when hair is soft. Wear soft, comfortable clothing next to ...

  15. Effects of Predictor Weighting Methods on Incremental Validity.

    Science.gov (United States)

    Sackett, Paul R; Dahlke, Jeffrey A; Shewach, Oren R; Kuncel, Nathan R

    2017-05-22

    It is common to add an additional predictor to a selection system with the goal of increasing criterion-related validity. Research on the incremental validity of a second predictor is generally based on forming a regression-weighted composite of the predictors. However, in practice predictors are commonly used in ways other than regression-weighted composites, and we examine the robustness of incremental validity findings to other ways of using predictors, namely, unit weighting and multiple hurdles. We show that there are settings in which the incremental value of a second predictor disappears, and can even produce lower validity than the first predictor alone, when these alternatives to regression weighting are used. First, we examine conditions under which unit weighting will negate gain in predictive power attainable via regression weights. Second, we revisit Schmidt and Hunter's (1998) summary of incremental validity of predictors over cognitive ability, evaluating whether the reported incremental value of a second predictor is different when predictors are unit weighted rather than regression weighted. Third, we analyze data reported in the published literature to discern the frequency with which unit weighting might affect conclusions about whether there is value in adding a second predictor to a first. Finally, we shift from unit weighting to multiple hurdle selection, examining conditions under which conclusions about incremental validity differ when regression weighting is replaced by multiple-hurdle selection. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  16. Dry aging of beef; Review

    OpenAIRE

    Dashdorj, Dashmaa; Tripathi, Vinay Kumar; Cho, Soohyun; Kim, Younghoon; Hwang, Inho

    2016-01-01

    The present review has mainly focused on the specific parameters including aging (aging days, temperature, relative humidity, and air flow), eating quality (flavor, tenderness and juiciness), microbiological quality and economic (shrinkage, retail yields and cost) involved beef dry aging process. Dry aging is the process where beef carcasses or primal cuts are hanged and aged for 28 to 55 d under controlling environment conditions in a refrigerated room with 0° to 4 °C and with relative humid...

  17. Dry PMR-15 Resin Powders

    Science.gov (United States)

    Vannucci, Raymond D.; Roberts, Gary D.

    1988-01-01

    Shelf lives of PMR-15 polymides lengthened. Procedure involves quenching of monomer reactions by vacuum drying of PRM-15 resin solutions at 70 to 90 degree F immediately after preparation of solutions. Absence of solvent eliminates formation of higher esters and reduces formation of imides to negligible level. Provides fully-formulated dry PMR-15 resin powder readily dissolvable in solvent at room temperature immediately before use. Resins used in variety of aerospace, aeronautical, and commercial applications.

  18. Freeze drying of red blood cells: the use of directional freezing and a new radio frequency lyophilization device.

    Science.gov (United States)

    Arav, Amir; Natan, Dity

    2012-08-01

    Red blood cell (RBC) units are administered routinely into patients expressing a wide range of acute and chronic conditions (e.g., anemia, traumatic bleeding, chronic diseases, and surgery). The modern blood banking system has been designed to answer this need and assure a continuous, high quality blood supply to patients. However, RBCs units can be stored under hypothermic conditions for only up to 42 days, which leads to periodic shortages. Cryopreservation can solve these shortages, but current freezing methods employ high glycerol concentrations, which need to be removed and the cells washed prior to transfusion, resulting in a long (more than 1 hour) and cumbersome washing step. Thus, frozen RBCs have limited use in acute and trauma situations. In addition, transportation of frozen samples is complicated and costly. Freeze drying (lyophilization) of RBCs has been suggested as a solution for these problems, since it will allow for a low weight sample to be stored at room temperature, but reaching this goal is not a simple task. We studied the effect of different solutions (IMT2 and IMT3) containing trehalose and antioxidants or trehalose and human serum albumin, respectively, on freezing/thawing and freeze drying of RBCs. In addition, we evaluated the effect of cells concentrations and cooling rates on the post thaw and post rehydration recoveries of the RBCs. Finally, we developed a new radio frequency (RF) lyophilization device for a more rapid and homogeneous sublimation process of the frozen RBCs samples. Recovery and free Hb were measured as well as oxygen association/dissociation and cell's deformability. We found that IMT3 (0.3 M trehalose and 10% HSA) solution that was directionally frozen at a rapid interface velocity of 1 mm/sec (resulting in a cooling rate of 150°C/min) yielded the best results (better than IMT2 solution and slow interface velocity). Freeze thawing gave 100% survival, while freeze drying followed by rehydration with 20% dextran-40k

  19. Weight loss, weight maintenance, and adaptive thermogenesis.

    Science.gov (United States)

    Camps, Stefan G J A; Verhoef, Sanne P M; Westerterp, Klaas R

    2013-05-01

    Diet-induced weight loss is accompanied by adaptive thermogenesis, ie, a disproportional or greater than expected reduction of resting metabolic rate (RMR). The aim of this study was to investigate whether adaptive thermogenesis is sustained during weight maintenance after weight loss. Subjects were 22 men and 69 women [mean ± SD age: 40 ± 9 y; body mass index (BMI; in kg/m(2)): 31.9 ± 3.0]. They followed a very-low-energy diet for 8 wk, followed by a 44-wk period of weight maintenance. Body composition was assessed with a 3-compartment model based on body weight, total body water (deuterium dilution), and body volume. RMR was measured (RMRm) with a ventilated hood. In addition, RMR was predicted (RMRp) on the basis of the measured body composition: RMRp (MJ/d) = 0.024 × fat mass (kg) + 0.102 × fat-free mass (kg) + 0.85. Measurements took place before the diet and 8, 20, and 52 wk after the start of the diet. The ratio of RMRm to RMRp decreased from 1.004 ± 0.077 before the diet to 0.963 ± 0.073 after the diet (P after 20 wk (0.983 ± 0.063; P weight loss after 8 wk (P Weight loss results in adaptive thermogenesis, and there is no indication for a change in adaptive thermogenesis up to 1 y, when weight loss is maintained. This trial was registered at clinicaltrials.gov as NCT01015508.

  20. Effects of drying on caffeoylquinic acid derivative content and antioxidant capacity of sweet potato leaves

    Directory of Open Access Journals (Sweden)

    Toong Long Jeng

    2015-12-01

    Full Text Available Caffeoylquinic acid (CQA derivatives are known to possess antioxidative potential and have many beneficial effects on human health. The present study compared the CQA contents and antioxidant activities of aerial parts of sweet potato plants. The effects of drying methods (freeze drying, and drying at 30°C, 70°C, and 100°C on these two parameters of the first fully expanded leaves were also assessed. The results indicated that the CQA derivatives were detectable in leaves, stem, and flowers of sweet potato plants (varied from 39.34 mg/g dry weight to 154.05 mg/g dry weight, with the leaves (particularly expanding and first fully expanded leaves containing more CQA derivatives than other aerial plant parts. The expanding and first fully expanded leaves also exhibited greater antioxidant activities than other aerial plant parts, possibly due to their higher contents of CQA derivatives. Drying method significantly affected the content of CQA derivatives in dried sweet potato leaf tissues. Drying treatments at both 70°C and 100°C significantly reduced the CQA derivative content and antioxidant activity in the first fully expanded leaves. Among the tested drying methods, the freeze-drying method demonstrated the preservation of the highest amount of CQA derivatives (147.84 mg/g and antioxidant property. However, 30°C cool air drying was also a desirable choice (total CQA derivative content was reduced to only 129.52 mg/g, compared to 70°C and 100°C hot air drying, for commercial-scale processing of sweet potato leaves, if the higher operation cost of freeze drying was a major concern.

  1. Dietary protein, weight loss, and weight maintenance.

    Science.gov (United States)

    Westerterp-Plantenga, M S; Nieuwenhuizen, A; Tomé, D; Soenen, S; Westerterp, K R

    2009-01-01

    The role of dietary protein in weight loss and weight maintenance encompasses influences on crucial targets for body weight regulation, namely satiety, thermogenesis, energy efficiency, and body composition. Protein-induced satiety may be mainly due to oxidation of amino acids fed in excess, especially in diets with "incomplete" proteins. Protein-induced energy expenditure may be due to protein and urea synthesis and to gluconeogenesis; "complete" proteins having all essential amino acids show larger increases in energy expenditure than do lower-quality proteins. With respect to adverse effects, no protein-induced effects are observed on net bone balance or on calcium balance in young adults and elderly persons. Dietary protein even increases bone mineral mass and reduces incidence of osteoporotic fracture. During weight loss, nitrogen intake positively affects calcium balance and consequent preservation of bone mineral content. Sulphur-containing amino acids cause a blood pressure-raising effect by loss of nephron mass. Subjects with obesity, metabolic syndrome, and type 2 diabetes are particularly susceptible groups. This review provides an overview of how sustaining absolute protein intake affects metabolic targets for weight loss and weight maintenance during negative energy balance, i.e., sustaining satiety and energy expenditure and sparing fat-free mass, resulting in energy inefficiency. However, the long-term relationship between net protein synthesis and sparing fat-free mass remains to be elucidated.

  2. Dry adhesives with sensing features

    Science.gov (United States)

    Krahn, J.; Menon, C.

    2013-08-01

    Geckos are capable of detecting detachment of their feet. Inspired by this basic observation, a novel functional dry adhesive is proposed, which can be used to measure the instantaneous forces and torques acting on an adhesive pad. Such a novel sensing dry adhesive could potentially be used by climbing robots to quickly realize and respond appropriately to catastrophic detachment conditions. The proposed torque and force sensing dry adhesive was fabricated by mixing Carbon Black (CB) and Polydimethylsiloxane (PDMS) to form a functionalized adhesive with mushroom caps. The addition of CB to PDMS resulted in conductive PDMS which, when under compression, tension or torque, resulted in a change in the resistance across the adhesive patch terminals. The proposed design of the functionalized dry adhesive enables distinguishing an applied torque from a compressive force in a single adhesive pad. A model based on beam theory was used to predict the change in resistance across the terminals as either a torque or compressive force was applied to the adhesive patch. Under a compressive force, the sensing dry adhesive was capable of measuring compression stresses from 0.11 Pa to 20.9 kPa. The torque measured by the adhesive patch ranged from 2.6 to 10 mN m, at which point the dry adhesives became detached. The adhesive strength was 1.75 kPa under an applied preload of 1.65 kPa for an adhesive patch with an adhesive contact area of 7.07 cm2.

  3. Dry Eyes and Glaucoma: Double Trouble

    Science.gov (United States)

    ... News About Us Donate In This Section Dry Eyes and Glaucoma: Double Trouble email Send this article ... disease bothers the patient more. What Causes Dry Eye Syndrome? Dry eye can be caused by many ...

  4. Weight gain - unintentional

    Science.gov (United States)

    ... be due to menstruation, heart or kidney failure, preeclampsia, or medicines you take. A rapid weight gain ... al. Position of the American Dietetic Association: weight management. J Am Diet Assoc . 2009;109:330-46. ...

  5. Weight-loss medications

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000346.htm Weight-loss medicines To use the sharing features on this page, please enable JavaScript. Several weight-loss medicines are available. Ask your health care provider ...

  6. PENGERTING SUHU RENDAH UNTUK MENJAGA MUTU BAHAN PERTANIAN [Low Temperature Drying to Maintain the Quality of Agricultural Products

    Directory of Open Access Journals (Sweden)

    R Sarwono

    2005-08-01

    Full Text Available Drying equipment is an important unit operation in industrial processes. Reducing moisture content in order to prolog the storage time is very commonly used. There are many agricultural product which are very heat sensitive. To maintain the essential ingredient in those product, drying process should be applied at low temperature drying process gave lower drying rate, is time consuming and in general costly. Increasing drying rate by reducing the absolute humidity is this recommended. There are many ways to dry the air, firstly moisture is condensed in evaporator and then dried air is heated in condenser. Is conducted if the drying system in connected with heat pump system. Secondly, moisture is absorbed by hygroscopic materials such as CaO. Water absorbed and reacted with CaO become Ca(OH2 in exothermic reaction, and simultaneously dried air is heated.

  7. Drying brick masonry by electro-osmosis

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Rörig-Dalgaard, Inge

    2006-01-01

    When a fine grained, porous medium is applied an electric DC field, transport of matter occurs, and the transport mechanism in focus of the present study is electro-osmosis, which is transport of water. In laboratory it was shown possible to transport water inside a brick and brick/mortar system...... in an applied electric field. Electrodes have been constructed and placed inside an old house with moisture problems from capillary rise of water. The water content of the experimental wall was about 14%(weight). The electro-osmotic effect was even more pronounced here than in the in the laboratory, and a clear...... movement of water towards the cathode was seen. Thus the basis for utilizing the electro-osmotic effect for drying brick masonry is present, but proper electrodes still needs to be developed....

  8. Weight management in pregnancy

    OpenAIRE

    Olander, E. K.

    2015-01-01

    Key learning points: - Women who start pregnancy in an overweight or obese weight category have increased health risks - Irrespective of pre-pregnancy weight category, there are health risks associated with gaining too much weight in pregnancy for both mother and baby - There are currently no official weight gain guidelines for pregnancy in the UK, thus focus needs to be on supporting pregnant women to eat healthily and keep active

  9. Use of a continuous twin screw granulation and drying system during formulation development and process optimization.

    Science.gov (United States)

    Vercruysse, J; Peeters, E; Fonteyne, M; Cappuyns, P; Delaet, U; Van Assche, I; De Beer, T; Remon, J P; Vervaet, C

    2015-01-01

    Since small scale is key for successful introduction of continuous techniques in the pharmaceutical industry to allow its use during formulation development and process optimization, it is essential to determine whether the product quality is similar when small quantities of materials are processed compared to the continuous processing of larger quantities. Therefore, the aim of this study was to investigate whether material processed in a single cell of the six-segmented fluid bed dryer of the ConsiGma™-25 system (a continuous twin screw granulation and drying system introduced by GEA Pharma Systems, Collette™, Wommelgem, Belgium) is predictive of granule and tablet quality during full-scale manufacturing when all drying cells are filled. Furthermore, the performance of the ConsiGma™-1 system (a mobile laboratory unit) was evaluated and compared to the ConsiGma™-25 system. A premix of two active ingredients, powdered cellulose, maize starch, pregelatinized starch and sodium starch glycolate was granulated with distilled water. After drying and milling (1000 μm, 800 rpm), granules were blended with magnesium stearate and compressed using a Modul™ P tablet press (tablet weight: 430 mg, main compression force: 12 kN). Single cell experiments using the ConsiGma™-25 system and ConsiGma™-1 system were performed in triplicate. Additionally, a 1h continuous run using the ConsiGma™-25 system was executed. Process outcomes (torque, barrel wall temperature, product temperature during drying) and granule (residual moisture content, particle size distribution, bulk and tapped density, hausner ratio, friability) as well as tablet (hardness, friability, disintegration time and dissolution) quality attributes were evaluated. By performing a 1h continuous run, it was detected that a stabilization period was needed for torque and barrel wall temperature due to initial layering of the screws and the screw chamber walls with material. Consequently, slightly deviating

  10. Preparation of High-Grade Powders from Tomato Paste Using a Vacuum Foam Drying Method.

    Science.gov (United States)

    Sramek, Martin; Schweiggert, Ralf Martin; van Kampen, Andreas; Carle, Reinhold; Kohlus, Reinhard

    2015-08-01

    We present a rapid and gentle drying method for the production of high-grade tomato powders from double concentrated tomato paste, comparing results with powders obtained by foam mat air drying and freeze dried powders. The principle of this method consists of drying tomato paste in foamed state at low temperatures in vacuum. The formulations were dried at temperatures of 50, 60, and 70 °C and vacuum of 200 mbar. Foam stability was affected by low serum viscosity and the presence of solid particles in tomato paste. Consequently, serum viscosity was increased by maltodextrin addition, yielding optimum stability at tomato paste:maltodextrin ratio of 2.4:1 (w/w) in dry matter. Material foamability was improved by addition of 0.5% (w/w, fresh weight) egg white. Because of solid particles in tomato paste, foam air filling had to be limited to critical air volume fraction of Φ = 0.7. The paste was first pre-foamed to Φ = 0.2 and subsequently expanded in vacuo. After drying to a moisture content of 5.6% to 7.5% wet base (w.b.), the materials obtained were in glassy state. Qualities of the resulting powders were compared with those produced by freeze and air drying. Total color changes were the least after vacuum drying, whereas air drying resulted in noticeable color changes. Vacuum foam drying at 50 °C led to insignificant carotenoid losses, being equivalent to the time-consuming freeze drying method. In contrast, air drying caused lycopene and β-carotene losses of 18% to 33% and 14% to 19% respectively. Thus, vacuum foam drying enables production of high-grade tomato powders being qualitatively similar to powders obtained by freeze drying.

  11. High-intensity drying processes-impulse drying

    Energy Technology Data Exchange (ETDEWEB)

    Orloff, D.I.

    1991-06-01

    Impulse drying is an innovative process for drying paper that holds great promise for reducing the energy consumed during the manufacture of paper and similar web products. impulse drying occurs when a wet paper web passes through a press nip in which one of the rolls is heated to a high temperature. A steam layer adjacent to the heated surface grows and displaces water from the sheet in a very efficient manner. The energy required for water removal is very much less than that required for conventional evaporative drying. To eliminate sheet delamination, low thermal mass ceramic press roll coatings were developed to reduce heat transfer to the sheet, while maintaining high heat flux during early stages of the process. In so doing, most of the transferred energy is used to form steam that displaces liquid water, rather than in excessively heating the sheet. During this period, a prototype ceramic coating was developed and its impulse drying performance was compared to that of steel surfaces. It was observed that ceramic platens can be operated at higher temperatures and pressures resulting in improved water removal and physical properties without inducing sheet delamination. Heat flux measurement techniques were developed to provide a mechanistic explanation for the superior performance of the prototype. The work confirmed that the prototype ceramic coating is more energy efficient than the steel surface.

  12. High-intensity drying processes-impulse drying. Yearly report

    Energy Technology Data Exchange (ETDEWEB)

    Orloff, D.I.

    1991-06-01

    Impulse drying is an innovative process for drying paper that holds great promise for reducing the energy consumed during the manufacture of paper and similar web products. impulse drying occurs when a wet paper web passes through a press nip in which one of the rolls is heated to a high temperature. A steam layer adjacent to the heated surface grows and displaces water from the sheet in a very efficient manner. The energy required for water removal is very much less than that required for conventional evaporative drying. To eliminate sheet delamination, low thermal mass ceramic press roll coatings were developed to reduce heat transfer to the sheet, while maintaining high heat flux during early stages of the process. In so doing, most of the transferred energy is used to form steam that displaces liquid water, rather than in excessively heating the sheet. During this period, a prototype ceramic coating was developed and its impulse drying performance was compared to that of steel surfaces. It was observed that ceramic platens can be operated at higher temperatures and pressures resulting in improved water removal and physical properties without inducing sheet delamination. Heat flux measurement techniques were developed to provide a mechanistic explanation for the superior performance of the prototype. The work confirmed that the prototype ceramic coating is more energy efficient than the steel surface.

  13. Individual variation in eating speed of dry sows.

    Science.gov (United States)

    Bøe, K E; Cronin, G M

    2015-04-01

    We investigated the variation in eating speed by individual pregnant sows and the influence of feeding dry compared to wet feed. A total of 39 Norwegian Landrace × Yorkshire dry sows, 13 primiparous and 26 multiparous, were included in the experiment. In experimental period 1, each sow was offered 2.2 kg of a standard concentrate feed without added water. In experimental period 2, the sows were offered the same weight of concentrate feed but after mixing with water at a ratio of 1:4, based on weight. The sows were kept in groups of 4 or 5 in pens with individual feeding stalls. The weighed allocations of feed were poured into the troughs before the sows were given access to the food. On d 1, the sows were allowed to eat for 15 min, on d 2 for 10 min, on d 3 for 5 min, on d 4 for 2 min 30 s, and on d 5 for 1 min 15 s. At the designated time, feed troughs were covered, blocking sow access, and residual feed was carefully removed and weighed. Mean consumption rate of dry feed was 183.2 g/min for the first 5 min and 169.7 g/min for the first 10 min. For wet feed, the mean consumption rate was 1,859.8 g/min for the first 5 min and 1,060.7 g/min for the first 10 min. After 5 min, the sows had consumed 41.6% of the dry feed (range 19.5 to 79.1%, CV = 31.0%) and 84.5% of the wet feed (range 54.3 to 99.1%, CV = 14.9%). After 10 min, the sows had consumed 77.1% of the dry feed (range 33.9 to 100.0%, CV = 24.9%) and 5 of the 39 sows had completely ingested their allotted feed. When feed was wet, sows finished 96.4% of the ration (range 72.7 to 99.1%, CV = 6.4%) after 10 min. The speed of eating dry feed was positively correlated with sow weight, both at 5 (R = 0.72, P 0.10). We conclude that dry feed resulted in larger individual variation in feed consumption rate than wet feed. Furthermore, whereas feed consumption rate was correlated with liveweight of the sow when eating dry feed, the relationship was not significant when sows ate wet feed.

  14. Etiology, prevalence, and treatment of dry eye disease.

    Science.gov (United States)

    Gayton, Johnny L

    2009-01-01

    This review article examines the prevalence, etiology, and current therapies of dry eye disease, with special focus on postmenopausal women. A systematic literature search utilizing MEDLINE was conducted to identify peer-reviewed articles related to dry eye published prior to September 2008. The terms "dry eye" and "women" were searched in combination with one or more of the following words or phrases: prevalence, postmenopausal, etiology, risk factors, therapy, medications, surgery, tear film, and quality of life. Articles were selected based on their direct applicability to the subject matter. A manual search was also conducted based on citations in the published literature. Epidemiologic studies identified prevalence rates ranging from 7% in the United States to 33% in Taiwan and Japan. Risk factors include advanced age, female sex, smoking, extreme heat or cold weather conditions, low relative humidity, use of video display terminals, refractive surgery, contact lens wear, and certain medications. The last decade has brought about a better understanding of the etiology of dry eye disease. New therapies that can alleviate the signs and symptoms of dry eye disease and, consequently, improve the quality of life of dry eye patients are available in the market.

  15. Development of a fluid bed granulation design space using critical quality attribute weighted tolerance intervals.

    Science.gov (United States)

    Zacour, Brian M; Drennen, James K; Anderson, Carl A

    2012-08-01

    The fluid bed granulation and drying unit operation were used as a case study for control systems implementation. This single processor was used to blend, granulate, dry, and cool the materials. The current study demonstrated control of each of the phases using a fully automated, hybrid control system that incorporated first-principle modeling, empirical design of experiments (DOE), and process analytical technology to assure the production of constant product quality. The system allowed data to be collected efficiently for the development of a rigorous design space that combined formulation factors, process factors, and their interactions to define a tolerance surface where risk of future product failure was significantly reduced. The DOE incorporated microcrystalline cellulose and lactose monohydrate, excipients with substantially different wetting properties, to elucidate the relationship between the critical process parameters of the unit operation and the material properties of the formulation components. The extended analysis of covariance model enabled these factors and their interaction terms to be described in a single model. The results indicate that the development of a tolerance interval-based weighted design space can enhance product understanding and thereby help to assure future product quality.

  16. Feature Weight Tuning for Recursive Neural Networks

    OpenAIRE

    2014-01-01

    This paper addresses how a recursive neural network model can automatically leave out useless information and emphasize important evidence, in other words, to perform "weight tuning" for higher-level representation acquisition. We propose two models, Weighted Neural Network (WNN) and Binary-Expectation Neural Network (BENN), which automatically control how much one specific unit contributes to the higher-level representation. The proposed model can be viewed as incorporating a more powerful c...

  17. Gas storage in "dry water" and "dry gel" clathrates.

    Science.gov (United States)

    Carter, Benjamin O; Wang, Weixing; Adams, Dave J; Cooper, Andrew I

    2010-03-02

    "Dry water" (DW) is a free-flowing powder prepared by mixing water, hydrophobic silica particles, and air at high speeds. We demonstrated recently that DW can be used to dramatically enhance methane uptake rates in methane gas hydrate (MGH). Here, we expand on our initial work, demonstrating that DW can be used to increase the kinetics of formation of gas clathrates for gases other than methane, such as CO(2) and Kr. We also show that the stability of the system toward coalescence can be increased via the inclusion of a gelling agent to form a "dry gel", thus dramatically improving the recyclability of the material. For example, the addition of gellan gum allows effective reuse over at least eight clathration cycles without the need for reblending. DW and its "dry gel" modification may represent a potential platform for recyclable gas storage or gas separation on a practicable time scale in a static, unmixed system.

  18. PREBIOTICS AS DRYING AIDS FOR SPRAY DRYING FRUIT JUICES

    Directory of Open Access Journals (Sweden)

    R. FREIXO

    2016-10-01

    Full Text Available Natural fruit juices are difficult to transform into powder because they are rich in sugars and acids with low glass transition temperatures, resulting in a sticky behaviour during spray drying. The present research work aimed to test the prebiotics maltodextrin and arabic gum as drying agents in order to be able to produce dehydrated powder from pineapple, strawberry and apple juices. 2 % of maltodextrin and an inlet air temperature of 130 °C are recommended to spray dry apple juice, reaching 60 % yield of powder with a water activity below 0.40. For strawberry juice, 2 % of this carrier is recommended and the inlet air temperature, 120 °C or 130 °C, did not seem relevant. For pineapple, neither the concentration of the carrier nor the inlet air temperature seemed to be relevant.

  19. A Grey-Box Model for Spray Drying Plants

    DEFF Research Database (Denmark)

    Petersen, Lars Norbert; Poulsen, Niels Kjølstad; Niemann, Hans Henrik

    2013-01-01

    Multi-stage spray drying is an important and widely used unit operation in the production of food powders. In this paper we develop and present a dynamic model of the complete drying process in a multi-stage spray dryer. The dryer is divided into three stages: The spray stage and two fluid bed...... are compared to datasets gathered at GEA Process Engineering’s test facility. The identified grey-box model parameters are identified from data and the resulting model fits the data well. The complexity of the model has been selected such that it is suitable for development of real-time optimization algorithms...

  20. Effect of different drying methods on chemical composition and bioactivity of finger citron polysaccharides.

    Science.gov (United States)

    Wu, Zhen

    2015-05-01

    Traditionally, people like to take dried finger citron fruits (FC) as adjuvant herbal medicines to treat a diversity of chronic diseases like asthma, hypertension and respiratory tract infections. Many healing properties are attributed to FC polysaccharides (FCPs), one of the main active ingredients of FC. Three drying methods, freeze drying (FDM), hot air drying (HDM) and vacuum drying methods (VDM) were comparatively studied on the physicochemical and antioxidant properties of FCPs. The results showed these FCPs were similar in UV and FT-IR spectrum. However, they showed significant differences (pFDM resulted in the properties of FCPs with lower molecular weight distribution, higher reducing power and scavenging abilities on DPPH, OH, and O2(-). Available data obtained in vitro models suggested that FDM was an appropriate and effective treatment for obtaining crude polysaccharides from FC fruits. Hence, drying methods used for preparation of FCPs can affect physicochemical and associated functional properties. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Spray Drying of High Sugar Content Foods: Improving of Product Yield and Powder Properties

    Directory of Open Access Journals (Sweden)

    Mehmet Koç

    2016-06-01

    Full Text Available Spray drying is the most preferred drying method to produce powdered food in the food industry and it is also widely used to convert sugar-rich liquid foods to a powder form. During and/or after spray drying process of sugar-rich products, undesirable situation was appeared such as stickiness, high moisture affinity (hygroscopicity and low solubility due to low molecular weight monosaccharides that found naturally in the structure. The basis of these problems was formed by low glass transition temperature of sugar-rich products. This review gives information about the difficulties in drying of sugar-rich products via spray dryer, actions need to be taken against these difficulties and drying of sugar-rich honey and fruit juices with spray drying method.

  2. The iron content and ferritin contribution in fresh, dried, and toasted nori, Pyropia yezoensis.

    Science.gov (United States)

    Masuda, Taro; Yamamoto, Ami; Toyohara, Haruhiko

    2015-01-01

    Iron is one of the essential trace elements for humans. In this study, the iron contents in fresh, dried, and toasted nori (Pyropia yezoensis) were analyzed. The mean iron content of fresh, dried, and toasted nori were 19.0, 22.6, and 26.2 mg/100 g (dry weight), respectively. These values were superior to other food of plant origin. Furthermore, most of the iron in nori was maintained during processing, such as washing, drying, and toasting. Then, the form of iron in fresh, dried, and toasted nori was analyzed. As a result, an iron storage protein ferritin contributed to iron storage in raw and dried nori, although the precise rate of its contribution is yet to be determined, while ferritin protein cage was degraded in the toasted nori. It is the first report that verified the ferritin contribution to iron storage in such edible macroalgae with commercial importance.

  3. 重症监护室医务人员手卫生状况及干手措施对洗手效果的影响%Hand hygiene status and effect of hand-drying measures on hand-washing of health care workers in an intensive care unit

    Institute of Scientific and Technical Information of China (English)

    李光香; 陈金之; 包惠荣; 杜娟

    2014-01-01

    Objective To realize hand hygiene status and effect of hand-drying measures on hand-washing of health care workers(HCWs)in an intensive care unit(ICU).Methods From February to April 2013,210 HCWs in an ICU were selected and randomly divided into three groups,group A dried hands with paper towel,group B with hand drier,and group C with personal towel,specimens from hands before hand-washing,after hand-washing,and after hand-drying were taken and performed detection.Results Hand microorganism count in group A,B and C before washing hands after contacting patients was (29.10±15.08)CFU/cm2 ,(31.42±14.76)CFU/cm2 and (30.36±15.52) CFU/cm2 respectively,the difference was not statistically different(F=0.048,P >0.05);After six-step hand-washing, hand microorganism count before hand drying in group A,B and C was (3.26 ±0.61 )CFU/cm2 ,(2.98 ±0.59) CFU/cm2 and (3.87±0.67)CFU/cm2 respectively,compared with hand microorganism count before hand-washing, the difference was statistically different(all P <0.01 ).After adopting different hand-drying methods,microorgan-ism count in three groups was statistically different(F =1 .892,P <0.05),group A ([1 .29±0.58]CFU/cm2 )was significantly lower than group B and C,group B ([9.51 ±0.73 ]CFU/cm2 )was significantly lower than group C ([22.76±4.11]CFU/cm2 );the qualified rate in group A (90.00%)was significantly higher than group B and C, group B (68.57%)was significantly higher than group C (47.14%).The top 5 pathogens isolated from HCWs’ hands were Pseudomonas aeruginosa ,Acinetobacter baumannii ,Klebsiella pneumoniae ,Escherichia coli ,and Coag-ulase negative Staphylococcus ,these strains were highly consistent with the top 5 multidrug-resistant organisms (MDROs)isolated from ICU patients in this hospital in 2013.Conclusion HCWs’hands are seriously contamina-ted after all kinds of medical performance;if hands are improperly dried,secondary contamination may occur;patho-gens isolated from HCWs’hands are highly consistent

  4. Yogurt and weight management.

    Science.gov (United States)

    Jacques, Paul F; Wang, Huifen

    2014-05-01

    A large body of observational studies and randomized controlled trials (RCTs) has examined the role of dairy products in weight loss and maintenance of healthy weight. Yogurt is a dairy product that is generally very similar to milk, but it also has some unique properties that may enhance its possible role in weight maintenance. This review summarizes the human RCT and prospective observational evidence on the relation of yogurt consumption to the management and maintenance of body weight and composition. The RCT evidence is limited to 2 small, short-term, energy-restricted trials. They both showed greater weight losses with yogurt interventions, but the difference between the yogurt intervention and the control diet was only significant in one of these trials. There are 5 prospective observational studies that have examined the association between yogurt and weight gain. The results of these studies are equivocal. Two of these studies reported that individuals with higher yogurt consumption gained less weight over time. One of these same studies also considered changes in waist circumference (WC) and showed that higher yogurt consumption was associated with smaller increases in WC. A third study was inconclusive because of low statistical power. A fourth study observed no association between changes in yogurt intake and weight gain, but the results suggested that those with the largest increases in yogurt intake during the study also had the highest increase in WC. The final study examined weight and WC change separately by sex and baseline weight status and showed benefits for both weight and WC changes for higher yogurt consumption in overweight men, but it also found that higher yogurt consumption in normal-weight women was associated with a greater increase in weight over follow-up. Potential underlying mechanisms for the action of yogurt on weight are briefly discussed.

  5. Investigation into solar drying of potato: effect of sample geometry on drying kinetics and CO2 emissions mitigation.

    Science.gov (United States)

    Tripathy, P P

    2015-03-01

    Drying experiments have been performed with potato cylinders and slices using a laboratory scale designed natural convection mixed-mode solar dryer. The drying data were fitted to eight different mathematical models to predict the drying kinetics, and the validity of these models were evaluated statistically through coefficient of determination (R(2)), root mean square error (RMSE) and reduced chi-square (χ (2)). The present investigation showed that amongst all the mathematical models studied, the Modified Page model was in good agreement with the experimental drying data for both potato cylinders and slices. A mathematical framework has been proposed to estimate the performance of the food dryer in terms of net CO2 emissions mitigation potential along with unit cost of CO2 mitigation arising because of replacement of different fossil fuels by renewable solar energy. For each fossil fuel replaced, the gross annual amount of CO2 as well as net amount of annual CO2 emissions mitigation potential considering CO2 emissions embodied in the manufacture of mixed-mode solar dryer has been estimated. The CO2 mitigation potential and amount of fossil fuels saved while drying potato samples were found to be the maximum for coal followed by light diesel oil and natural gas. It was inferred from the present study that by the year 2020, 23 % of CO2 emissions can be mitigated by the use of mixed-mode solar dryer for drying of agricultural products.

  6. Potential evapotranspiration and continental drying

    Science.gov (United States)

    Milly, P. C. D.; Dunne, K. A.

    2016-10-01

    By various measures (drought area and intensity, climatic aridity index, and climatic water deficits), some observational analyses have suggested that much of the Earth’s land has been drying during recent decades, but such drying seems inconsistent with observations of dryland greening and decreasing pan evaporation. `Offline’ analyses of climate-model outputs from anthropogenic climate change (ACC) experiments portend continuation of putative drying through the twenty-first century, despite an expected increase in global land precipitation. A ubiquitous increase in estimates of potential evapotranspiration (PET), driven by atmospheric warming, underlies the drying trends, but may be a methodological artefact. Here we show that the PET estimator commonly used (the Penman-Monteith PET for either an open-water surface or a reference crop) severely overpredicts the changes in non-water-stressed evapotranspiration computed in the climate models themselves in ACC experiments. This overprediction is partially due to neglect of stomatal conductance reductions commonly induced by increasing atmospheric CO2 concentrations in climate models. Our findings imply that historical and future tendencies towards continental drying, as characterized by offline-computed runoff, as well as other PET-dependent metrics, may be considerably weaker and less extensive than previously thought.

  7. NID dry desulfurization system -- An update

    Energy Technology Data Exchange (ETDEWEB)

    Ahman, S.; Bengtsson, S.

    1998-07-01

    The development of ABB's low cost flue gas desulfurization (FGD) system has been reported in various papers during 1997. The system combines low cost and simple operation with very good performance and is targeted especially for the emerging markets in Asia and East Europe. This method is capable of achieving 90+% SO{sub 2} removal, irrespective of sulphur content in the fuel. The system is further easy to retrofit at existing sites; it has a minimum space requirement. An important feature of the dry FGD technology, sometimes not highlighted enough, is the fact that particulate collection of fly ash is facilitated by the FGD system at no extra capital charge. The flue gas temperature after a DFGD system also often allows the flue gas to be passed on to an existing stack without reheat. ``NID'' is an acronym for ``Novel Integrated Desulfurization'', indicative of the innovative nature of this FGD technology enabled by the integration of several subfunctionalities into one unit. The first two commercial plants were installed by the Polish power company Elektrownia Laziska. These full scale units were commissioned during 1996. A third unit at a diesel power station in Finland is at the time of writing in the commissioning stage.

  8. DRI Renewable Energy Center (REC) (NV)

    Energy Technology Data Exchange (ETDEWEB)

    Hoekman, S. Kent; Broch, Broch; Robbins, Curtis; Jacobson, Roger; Turner, Robert

    2012-12-31

    The primary objective of this project was to utilize a flexible, energy-efficient facility, called the DRI Renewable Energy Experimental Facility (REEF) to support various renewable energy research and development (R&D) efforts, along with education and outreach activities. The REEF itself consists of two separate buildings: (1) a 1200-ft2 off-grid capable house and (2) a 600-ft2 workshop/garage to support larger-scale experimental work. Numerous enhancements were made to DRI's existing renewable power generation systems, and several additional components were incorporated to support operation of the REEF House. The power demands of this house are satisfied by integrating and controlling PV arrays, solar thermal systems, wind turbines, an electrolyzer for renewable hydrogen production, a gaseous-fuel internal combustion engine/generator set, and other components. Cooling needs of the REEF House are satisfied by an absorption chiller, driven by solar thermal collectors. The REEF Workshop includes a unique, solar air collector system that is integrated into the roof structure. This system provides space heating inside the Workshop, as well as a hot water supply. The Workshop houses a custom-designed process development unit (PDU) that is used to convert woody biomass into a friable, hydrophobic char that has physical and chemical properties similar to low grade coal. Besides providing sufficient space for operation of this PDU, the REEF Workshop supplies hot water that is used in the biomass treatment process. The DRI-REEF serves as a working laboratory for evaluating and optimizing the performance of renewable energy components within an integrated, residential-like setting. The modular nature of the system allows for exploring alternative configurations and control strategies. This experimental test bed is also highly valuable as an education and outreach tool both in providing an infrastructure for student research projects, and in highlighting renewable

  9. Is Your Brain to Blame for Weight Regain?

    OpenAIRE

    Cornier, Marc-Andre

    2011-01-01

    Obesity is a serious and growing public health problem in the United States and the world. While weight loss is associated with significant benefits in obesity-related co-morbidities, successful long-term weight loss maintenance is extremely difficult. This limited success is primarily due to biologic mechanisms that clearly favor weight regain. The weight-reduced state is associated with not only reductions in energy expenditure and changes in substrate metabolism but also in increased energ...

  10. Impact of fillers on dissolution kinetic of fenofibrate dry foams.

    Science.gov (United States)

    Lenz, Elisabeth; Sprunk, Angela; Kleinebudde, Peter; Page, Susanne

    2015-01-01

    Dry foam technology reveals the opportunity to improve the dissolution behavior of poorly soluble drugs tending to agglomeration due to micronization. In this study, the impact of fillers on the manufacturability, the properties of dry foams and granules as well as the dissolution kinetics of dry foam tablets was investigated using fenofibrate as a model compound. Different maltodextrins and dried glucose syrups, a maltodextrin-phosphatidylcholine complex, isomalt and a 1:1 mixture of mannitol/glucose syrup were used as filler. Within the group of maltodextrins and glucose syrups, the influences of dextrose equivalent (DE), particle morphology and botanical source of starch were investigated. Comparable macroscopic foam structures were obtained with maltodextrins and glucose syrups whereas different foam morphologies were obtained for the other fillers tested. Regarding the maltodextrins and glucose syrups, different physicochemical and particle properties had a minor impact on granule characteristics and tablet dissolution. Using the maltodextrin-phosphatidylcholine complex resulted in a low specific surface area of the granules and a slow tablet dissolution caused by a slow disintegration. In contrast, a high specific surface area and a fast release were obtained with isomalt and glucose syrup/mannitol mixture indicating that high soluble low molecular weight fillers enable the development of fast dissolving dry foam tablets.

  11. Ageing of Dry Cement Mixes for Finishing Purposes

    Directory of Open Access Journals (Sweden)

    Bronius VEKTARIS

    2013-09-01

    Full Text Available Dry building mixes, stored in the air, absorb water vapor and CO2 gas and ageing because properties of binding materials, mostly Portland cement, deteriorate after its prehydration and carbonation. In this paper the ageing singularities of dry cement mixes for finishing purposes and additives for retarding this process has been determinated. Ordinary and quickly hardening Portland cements absorb H2O and CO2 more than white cement – about 70 % – 75 % and 30 % – 38 % per month of innitial mass, respectively. White cement is more resistant to prehydration and carbonation, because it contains less C3A, C4AF and alkali, characterized initial activity. Dry mixes with white cement, although slower, but still worse after stored. Influence of routine dry mortar mixes ingredients and additives (methyl cellulose, pigments, sand and lime on prehydration properties of the mixes for finishing purpose is not substantial. Significant positive influence comes from the addition of fatty acid salts (zinc stearate or sodium oleate. The dry cement mixes for finishing purpose has been recomended to hydrophobisate with one of these additives, adding about 1 % by weight of cement during preducing mixes. DOI: http://dx.doi.org/10.5755/j01.ms.19.3.5243

  12. Ageing of Dry Cement Mixes for Finishing Purposes

    Directory of Open Access Journals (Sweden)

    Bronius VEKTARIS

    2013-09-01

    Full Text Available Dry building mixes, stored in the air, absorb water vapor and CO2 gas and ageing because properties of binding materials, mostly Portland cement, deteriorate after its prehydration and carbonation. In this paper the ageing singularities of dry cement mixes for finishing purposes and additives for retarding this process has been determinated. Ordinary and quickly hardening Portland cements absorb H2O and CO2 more than white cement – about 70 % – 75 % and 30 % – 38 % per month of innitial mass, respectively. White cement is more resistant to prehydration and carbonation, because it contains less C3A, C4AF and alkali, characterized initial activity. Dry mixes with white cement, although slower, but still worse after stored. Influence of routine dry mortar mixes ingredients and additives (methyl cellulose, pigments, sand and lime on prehydration properties of the mixes for finishing purpose is not substantial. Significant positive influence comes from the addition of fatty acid salts (zinc stearate or sodium oleate. The dry cement mixes for finishing purpose has been recomended to hydrophobisate with one of these additives, adding about 1 % by weight of cement during preducing mixes. DOI: http://dx.doi.org/10.5755/j01.ms.19.3.5243

  13. Ageing of Dry Cement Mixes for Finishing Purposes

    Directory of Open Access Journals (Sweden)

    Bronius VEKTARIS

    2013-09-01

    Full Text Available Dry building mixes, stored in the air, absorb water vapor and CO2 gas and ageing because properties of binding materials, mostly Portland cement, deteriorate after its prehydration and carbonation. In this paper the ageing singularities of dry cement mixes for finishing purposes and additives for retarding this process has been determinated. Ordinary and quickly hardening Portland cements absorb H2O and CO2 more than white cement – about 70 % – 75 % and 30 % – 38 % per month of innitial mass, respectively. White cement is more resistant to prehydration and carbonation, because it contains less C3A, C4AF and alkali, characterized initial activity. Dry mixes with white cement, although slower, but still worse after stored. Influence of routine dry mortar mixes ingredients and additives (methyl cellulose, pigments, sand and lime on prehydration properties of the mixes for finishing purpose is not substantial. Significant positive influence comes from the addition of fatty acid salts (zinc stearate or sodium oleate. The dry cement mixes for finishing purpose has been recomended to hydrophobisate with one of these additives, adding about 1 % by weight of cement during preducing mixes. DOI: http://dx.doi.org/10.5755/j01.ms.19.3.5243

  14. Effect of egg weight on hatchability and hatchling weight in Fayoumi, Desi and crossbred (Rhode Island Red X Fayoumi chickens

    Directory of Open Access Journals (Sweden)

    Abdul Rashid

    2013-06-01

    Full Text Available Aim: An experiment was conducted to determine the effect of egg weight on hatchability, embryonic deaths and hatchling weight of three rural breeds (Fayoumi, Desi and crossbred (Rhode Island Red X Fayoumi chickens. Materials and Methods: Three different egg weight groups classified into small: ( 45g were used in the experiment. A complete randomized design was used for the experiment. Simultaneously quadratic type equation was used to determine the egg weight for optimum hatchability and hatchling weight. Results: Percentage hatchability of medium-sized eggs was higher (P < 0.05 than those in large sized eggs. Similarly, large–sized eggs had higher (P < 0.05 percentage hatchability than small sized eggs in all breeds. Hatchability percentage changed by ratio 0.4077 with one unit change in mean egg weight of Fayoumi. The hatchability changed by ratio 0.5488 with one unit change in egg weight of Desi. The hatchability changed by ratio 0.3767 with one unit change in egg weight of crossbred chickens. Mean hatchling weight in Fayoumi eggs changed by ratio of 0.6760; Desi eggs by ratio of 0.5955 and crossbred chicken eggs by ratio of 1.3613 with one unit change in mean egg weight. The overall mean hatchling weight as percentage of mean egg weight in case of Fayoumi was 67.10, in Desi 62.42 and 68.36 in case of cross birds. There was no evidence that hatchabilitypercentage increased with increase in egg weight in all the three strains of birds. Small-sized eggs had higher (P<0.05 embryonic deaths than those of medium and large-sized eggs in three breeds. Hatchling weight from large eggs were (P < 0.05 higher than those of small eggs in three breeds. Mean hatchling weight of Fayoumi changed by ratio 0.676 with one unit change in mean egg weight. In case of Desi chickens, mean hatchling weight changed by ratio 0.5955 with one unit change in egg weight. In case of crossbred chicken, mean hatchling weight changed by ratio 1.3613 with one unit change in

  15. Dry tree semisubmersible platform: from 'technology accepted' to 'project ready'

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Roger; Wang, Tao; Nygaard, Magne; Bendiksen, Rolf [Aker Solutions, Oslo (Norway)

    2012-07-01

    Development of new technologies for application of dry tree solutions on semi-submersible hull production platforms opens up new flexible and cost efficient solutions for oil and gas fields in deep and ultra deep water. Aker Solutions has brought the technology through the last steps to a project ready stage. Top tension risers allow for shifting the Christmas tree from seabed to topside, and enables drilling and production from the same unit. By shifting the wellhead and Christmas tree from seabed to platform deck, well maintenance is simplified, and makes the Dry Tree Semi relevant to consider for the Brazilian pre-salt reservoirs. Easy access to the wells for maintenance gives a potential for a higher recovery rate for the field. Future development of ultra deep water oil and gas fields demands solutions overcoming the limitations set by the TLP and the Spar buoy. Combining knowledge from already proven solutions, and a limited addition of new technology, these limitations are overcome with Aker Solutions' Dry Tree Semi. It is designed and proven for Gulf of Mexico environmental conditions. It is verified for conditions with a significant wave height of 14 meters, and able to withstand 100-year extreme weather and 1000-years survival conditions. A conventional semi-submersible platform, but with a deeper draft to further reduce the already low motions, makes the basis for the concept. Top tensioned risers (TTR) with vertical motion compensation stroke of up to 10 meters, makes it possible to shift the Christmas tree from seabed to platform deck. The deep draft design of the hull reduces the wave force excitation on the pontoons, reducing both the roll and pitch dynamics. The Dry Tree Semi represents several major benefits, including low sensitivity to water depth, reduced hull and topside weight, and flexibility in transportation, mooring, and decommissioning. (author)

  16. Drying characteristics and kinetics of fluidized bed dried potato

    Directory of Open Access Journals (Sweden)

    S.B. BAKAL

    2008-12-01

    Full Text Available In developed countries, more than 50% potatoes are consumed as processed products. As drying is the vital phenomenon in processing, it is necessary to investigate the drying characteristics and its kinetics. In this experimental study, drying kinetics of Potato in two different shape of cuboidal & cylindrical with three aspect ratio was investigated as a function of drying conditions. Experiments were conducted using air temperatures of 50, 60 and 70 ºC, at velocity of 7 ms-1. The experimental moisture data were fitted to Page and simple models available in the literature, and a good agreement was observed. The Page model gave better fit than simple model. In the ranges covered, the values of the effective moisture diffusivity, Deff were obtained between 2.278 × 10-9 to 3.314 × 10-8 m2s-1 from the Fick's diffusion model. Using Deff, the value of activation energy (Ea was determined assuming the Arrhenius-type temperature relationship.

  17. Cutinase promotes dry esterification of cotton cellulose.

    Science.gov (United States)

    Xiaoman, Zhao; Teresa, Matama; Artur, Ribeiro; Carla, Silva; Jing, Wu; Jiajia, Fu; Artur, Cavaco-Paulo

    2016-01-01

    Cutinase from Thermobifida fusca was used to esterify the hydroxyl groups of cellulose with the fatty acids from triolein. Cutinase and triolein were pre-adsorbed on cotton and the reaction proceeded in a dry state during 48 h at 35°C. The cutinase-catalyzed esterification of the surface of cotton fabric resulted in the linkage of the oleate groups to the glycoside units of cotton cellulose. The superficial modification was confirmed by performing ATR-FTIR on treated cotton samples and by MALDI-TOF analysis of the liquors from the treatment of the esterified cotton with a crude cellulase mixture. Modified cotton fabric also showed a significant increase of hydrophobicity. This work proposes a novel bio-based approach to obtain hydrophobic cotton.

  18. Healthy weight game!: Lose weight together

    NARCIS (Netherlands)

    Lentelink, S.J.; Spil, Antonius A.M.; Broens, T.; Broens, T.H.F.; Hermens, Hermanus J.; Jones, Valerie M.

    2013-01-01

    Overweight and obesity pose a serious and increasing problem worldwide. Current treatment methods can result in weight loss in the short term but often fail in the longer term. Increasing motivation and thereby improving adherence can be a key factor in achieving the needed behavioral change. One

  19. Solar Drying of Red Mud

    Science.gov (United States)

    Chandler, John L.

    Solar drying of thickened red mud is the latest method for its disposal in an economical and environmentally acceptable way. Two years full scale experience with this method in Jamaica has shown that its success depends on accurate grading of the solar drying area and accurate control of the pre-dewatering of the mud in the alumina plant. Experience with the use of deep thickening for pre-dewatering is described, together with a novel method for measurement and control of thickened mud rheology.

  20. Development of freeze dried vegetables

    Science.gov (United States)

    Larson, R. W.

    1970-01-01

    The development of freeze dried vegetables to be used in the Apollo food system is discussed. After the initial selection and screening of vegetables, several types of freeze dried vegetables were prepared in small batches. From these small batches, two vegetables were judged satisfactory for further testing and evaluation. These vegetables, mashed potatoes and asparagus, were subjected to storage at 100 deg plus or minus 5 F. for two weeks and then taste tested. The vegetables were also tested to determine if they complied with the microbiological requirements for Apollo food. The space food prototype production guide for the vegetables is submitted.

  1. Dry technologies and community bureaucracies

    DEFF Research Database (Denmark)

    Rasmussen, Mattias Borg

    2014-01-01

    Irrigation channels criss-cross the Andes, bringing water to the dry soils of the peasants' fields. To obtain water, people must deal not only with the amount of water and the physical terrain, but also with concerns of others and matters of the social terrain.......Irrigation channels criss-cross the Andes, bringing water to the dry soils of the peasants' fields. To obtain water, people must deal not only with the amount of water and the physical terrain, but also with concerns of others and matters of the social terrain....

  2. Fundamentals of freeze-drying.

    Science.gov (United States)

    Nail, Steven L; Jiang, Shan; Chongprasert, Suchart; Knopp, Shawn A

    2002-01-01

    Given the increasing importance of reducing development time for new pharmaceutical products, formulation and process development scientists must continually look for ways to "work smarter, not harder." Within the product development arena, this means reducing the amount of trial and error empiricism in arriving at a formulation and identification of processing conditions which will result in a quality final dosage form. Characterization of the freezing behavior of the intended formulation is necessary for developing processing conditions which will result in the shortest drying time while maintaining all critical quality attributes of the freeze-dried product. Analysis of frozen systems was discussed in detail, particularly with respect to the glass transition as the physical event underlying collapse during freeze-drying, eutectic mixture formation, and crystallization events upon warming of frozen systems. Experiments to determine how freezing and freeze-drying behavior is affected by changes in the composition of the formulation are often useful in establishing the "robustness" of a formulation. It is not uncommon for seemingly subtle changes in composition of the formulation, such as a change in formulation pH, buffer salt, drug concentration, or an additional excipient, to result in striking differences in freezing and freeze-drying behavior. With regard to selecting a formulation, it is wise to keep the formulation as simple as possible. If a buffer is needed, a minimum concentration should be used. The same principle applies to added salts: If used at all, the concentration should be kept to a minimum. For many proteins a combination of an amorphous excipient, such as a disaccharide, and a crystallizing excipient, such as glycine, will result in a suitable combination of chemical stability and physical stability of the freeze-dried solid. Concepts of heat and mass transfer are valuable in rational design of processing conditions. Heat transfer by conduction

  3. 7 CFR 58.813 - Dry whey.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Dry whey. 58.813 Section 58.813 Agriculture... Products Bearing Usda Official Identification § 58.813 Dry whey. The quality requirements for dry whey shall be in accordance with the U.S. Standards for Dry Whey. Supplemental Specifications for...

  4. USE OF COAL DRYING TO REDUCE WATER CONSUMED IN PULVERIZED COAL POWER PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    Edward K. Levy; Nenad Sarunac; Harun Bilirgen; Hugo Caram

    2006-03-01

    U.S. low rank coals contain relatively large amounts of moisture, with the moisture content of subbituminous coals typically ranging from 15 to 30 percent and that for lignites from 25 and 40 percent. High fuel moisture has several adverse impacts on the operation of a pulverized coal generating unit, for it can result in fuel handling problems and it affects heat rate, stack emissions and maintenance costs. Theoretical analyses and coal test burns performed at a lignite fired power plant show that by reducing the fuel moisture, it is possible to improve boiler performance and unit heat rate, reduce emissions and reduce water consumption by the evaporative cooling tower. The economic viability of the approach and the actual impact of the drying system on water consumption, unit heat rate and stack emissions will depend critically on the design and operating conditions of the drying system. The present project evaluated the low temperature drying of high moisture coals using power plant waste heat to provide the energy required for drying. Coal drying studies were performed in a laboratory scale fluidized bed dryer to gather data and develop models on drying kinetics. In addition, analyses were carried out to determine the relative costs and performance impacts (in terms of heat rate, cooling tower water consumption and emissions) of drying along with the development of optimized drying system designs and recommended operating conditions.

  5. Predictors of weight maintenance

    NARCIS (Netherlands)

    Pasman, W.J.; Saris, W.H.M.; Westerterp-Plantenga, M.S.

    1999-01-01

    Objective: To obtain predictors of weight maintenance after a weight-loss intervention. Research Methods and Procedures: An overall analysis of data from two-long intervention studies [n = 67 women; age: 37.9±1.0 years; body weight (BW): 87.0±1.2 kg; body mass index: 32.1±0.5 kg·m-2; % body fat: 42.

  6. Predictors of weight maintenance

    NARCIS (Netherlands)

    Pasman, W.J.; Saris, W.H.M.; Westerterp-Plantenga, M.S.

    1999-01-01

    Objective: To obtain predictors of weight maintenance after a weight-loss intervention. Research Methods and Procedures: An overall analysis of data from two-long intervention studies [n = 67 women; age: 37.9±1.0 years; body weight (BW): 87.0±1.2 kg; body mass index: 32.1±0.5 kg·m-2; % body fat: 42.

  7. Predictors of weight maintenance

    NARCIS (Netherlands)

    Pasman, W.J.; Saris, W.H.M.; Westerterp-Plantenga, M.S.

    1999-01-01

    Objective: To obtain predictors of weight maintenance after a weight-loss intervention. Research Methods and Procedures: An overall analysis of data from two-long intervention studies [n = 67 women; age: 37.9±1.0 years; body weight (BW): 87.0±1.2 kg; body mass index: 32.1±0.5 kg·m-2; % body fat:

  8. Walks on Weighted Networks

    Institute of Scientific and Technical Information of China (English)

    WU An-Cai; XU Xin-Jian; WU Zhi-Xi; WANG Ying-Hai

    2007-01-01

    We investigate the dynamics of random walks on weighted networks. Assuming that the edge weight and the node strength are used as local information by a random walker. Two kinds of walks, weight-dependent walk and strength-dependent walk, are studied. Exact expressions for stationary distribution and average return time are derived and confirmed by computer simulations. The distribution of average return time and the mean-square that a weight-dependent walker can arrive at a new territory more easily than a strength-dependent one.

  9. Adaptive Context Tree Weighting

    CERN Document Server

    O'Neill, Alexander; Shao, Wen; Sunehag, Peter

    2012-01-01

    We describe an adaptive context tree weighting (ACTW) algorithm, as an extension to the standard context tree weighting (CTW) algorithm. Unlike the standard CTW algorithm, which weights all observations equally regardless of the depth, ACTW gives increasing weight to more recent observations, aiming to improve performance in cases where the input sequence is from a non-stationary distribution. Data compression results show ACTW variants improving over CTW on merged files from standard compression benchmark tests while never being significantly worse on any individual file.

  10. Production response of lactating cows fed dried versus wet brewers' grain in diets with similar dry matter content.

    Science.gov (United States)

    Dhiman, T R; Bingham, H R; Radloff, H D

    2003-09-01

    Twenty-four Holstein-Friesian dairy cows (20 intact and 4 fitted with rumen cannula) during early lactation (56 +/- 25.3 d in milk) were assigned to two treatments to determine intake and production responses to feeding dried and wet brewers' grain. There were two cows fitted with a rumen cannula in each treatment. Cows were fed a total mixed ration twice daily containing either dried or wet brewers' grain at 15% of the dietary dry matter (DM). The diet contained 47% forage and 53% concentrate. The experimental design was a replicated 2 x 2 Latin square with two periods of 5 wk each. First 2 wk in each period were considered as adaptation to diets and data from the last 3 wk were used for treatment comparisons. Dried and wet brewers' diets contained 68.0 and 66.5% DM, respectively. Feeding brewers' grain dry or wet to dairy cows had no influence on feed intake (25.6 vs. 25.1 kg/d), fat corrected milk yield (40.1 vs. 40.7 kg/d), milk composition and feed consumption. The pH, ammonia, total volatile fatty acids and molar ratios of volatile fatty acids in the rumen fluid were not different between treatments. Fatty acid composition of milk fat from cows fed diets containing dry or wet brewers' grain was identical, except C18:2 and C18:3 fatty acids were lower in milk fat from cows fed wet brewers' grain compared with dried brewers' grain. The results from the present study suggest that the performance of cows fed either dried or wet brewers' grain at 15% of dietary DM was similar when diets had the same DM. The average price for dried and wet brewers' grain in the United States from July 2001 to June 2002 was dollars 145.3 and dollars 96.9/metric tonne DM, respectively. Using wet instead of dried brewers' grain will save dollars 49/metric tonne minus the difference in storage costs. Wet brewers' grain can be fed to dairy cows in areas that are close to the brewery and provides nutritive value similar to the dried brewers' grain.

  11. Hybrid Rice for Dry Regions

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Luo Lijun, director of the Shanghai Agrobiological Gene Center, recently announced that Hanyou No. 3 - a genetically modified rice capable of producing high yields in dry areas - has been developed at the center.The hybrid yields 7,571 kilograms per hectare, about the same as ordinary rice.

  12. Apparatus for drying sugar cubes

    NARCIS (Netherlands)

    Derckx, H.A.J.; Torringa, H.M.

    1999-01-01

    Device for drying sugar cubes containing a heating apparatus for heating and dehumidifying the sugar cubes, a conditioning apparatus for cooling off and possibly further dehumidifying the sugar cubes and a conveying apparatus for conveying the sugar cubes through the heating apparatus and the condit

  13. Apparatus for drying sugar cubes

    NARCIS (Netherlands)

    Derckx, H.A.J.; Torringa, H.M.

    1999-01-01

    Device for drying sugar cubes containing a heating apparatus for heating and dehumidifying the sugar cubes, a conditioning apparatus for cooling off and possibly further dehumidifying the sugar cubes and a conveying apparatus for conveying the sugar cubes through the heating apparatus and the

  14. Longevity Of Dry Film Lubricants

    Science.gov (United States)

    Kannel, J. W.; Stockwell, R. D.

    1993-01-01

    Report describes evaluation of dry film lubricants candidate for use in rotary joints of proposed Space Station. Study included experiments and theoretical analyses focused on longevity of sputtered molybdenum disulfide films and ion-plated lead films under conditions partially simulating rolling contact.

  15. Apparatus for drying sugar cubes

    NARCIS (Netherlands)

    Derckx, H.A.J.; Torringa, H.M.

    1999-01-01

    Device for drying sugar cubes containing a heating apparatus for heating and dehumidifying the sugar cubes, a conditioning apparatus for cooling off and possibly further dehumidifying the sugar cubes and a conveying apparatus for conveying the sugar cubes through the heating apparatus and the condit

  16. Flavour release from dried vegetables.

    NARCIS (Netherlands)

    Ruth, van S.M.

    1995-01-01

    The research described in this thesis was focused on the development of an in vitro model system for isolation of volatile compounds from dried vegetables under mouth conditions, such as volume of the mouth, temperature, salivation and mastication. Instrumental analysis of these volatile compoun

  17. Organ weight: As Influenced by color, sex and weight group in Japanese quail

    Directory of Open Access Journals (Sweden)

    R. Tarhyel

    2012-08-01

    Full Text Available This study was carried out on Japanese quails (Coturnix japonica to determine the effect of sex, colour and weight group on various organ weights. The birds were housed in deep litter pen at the poultry unit of University of Maiduguri Teaching and Research Farm. Birds were fed with broiler starter marsh from 5-8 weeks then, layer mash from 8-52 weeks. The birds were divided into various groups (sex, colour and weight groups. The experiment lasted for 52 weeks. Birds were slaughtered and eviscerated. The organs were weighed using sensitive scale and the results obtained were subjected to statistical analysis using Analysis of Variance (SPSS 16.0 statistical package and the means were separated using Duncan Multiple Range Test. Effect of color on organ weight were statistically not significant (p>0.05 except for fat weight, while the effect of sex on organ weight indicated that male and female differed significantly (p

  18. Determination of drying characteristics and quality properties of eggplant in different drying conditions

    Directory of Open Access Journals (Sweden)

    Gözde Bayraktaroglu Urun

    2015-12-01

    Full Text Available Drying is the most traditional process used for preserving eggplant a long time. The aim of this study was to determining drying characteristics and quality properties of eggplant dried by sun drying, hot air convective drying and infrared assisted convective drying. Convective drying and infrared assisted convective were carried out in a convective dryer at three different temperatures(40°, 50°, 60°C and air velocity at 5 m/s.The increasing of temperatures during the drying of eggplant led to a significant reduction of the drying time. However loss of nutrition was observed in eggplant samples dried at higher temperature.The biggest change in colour parameters was observed in samples dried with sun drying.So it was thought that sun drying had a negative effect on quality properties of eggplant samples.

  19. Prediction of risk and incidence of dry eye in critical patients1

    Science.gov (United States)

    de Araújo, Diego Dias; Almeida, Natália Gherardi; Silva, Priscila Marinho Aleixo; Ribeiro, Nayara Souza; Werli-Alvarenga, Andreza; Chianca, Tânia Couto Machado

    2016-01-01

    Objectives: to estimate the incidence of dry eye, to identify risk factors and to establish a risk prediction model for its development in adult patients admitted to the intensive care unit of a public hospital. Method: concurrent cohort, conducted between March and June, 2014, with 230 patients admitted to an intensive care unit. Data were analyzed by bivariate descriptive statistics, with multivariate survival analysis and Cox regression. Results: 53% out of 230 patients have developed dry eye, with onset mean time of 3.5 days. Independent variables that significantly and concurrently impacted the time for dry eye to occur were: O2 in room air, blinking more than five times per minute (lower risk factors) and presence of vascular disease (higher risk factor). Conclusion: dry eye is a common finding in patients admitted to adults intensive care units, and care for its prevention should be established. PMID:27192415

  20. Seed coat color and seed weight contribute differential responses of targeted metabolites in soybean seeds.

    Science.gov (United States)

    Lee, Jinwook; Hwang, Young-Sun; Kim, Sun Tae; Yoon, Won-Byong; Han, Won Young; Kang, In-Kyu; Choung, Myoung-Gun

    2017-01-01

    The distribution and variation of targeted metabolites in soybean seeds are affected by genetic and environmental factors. In this study, we used 192 soybean germplasm accessions collected from two provinces of Korea to elucidate the effects of seed coat color and seeds dry weight on the metabolic variation and responses of targeted metabolites. The effects of seed coat color and seeds dry weight were present in sucrose, total oligosaccharides, total carbohydrates and all measured fatty acids. The targeted metabolites were clustered within three groups. These metabolites were not only differently related to seeds dry weight, but also responded differentially to seed coat color. The inter-relationship between the targeted metabolites was highly present in the result of correlation analysis. Overall, results revealed that the targeted metabolites were diverged in relation to seed coat color and seeds dry weight within locally collected soybean seed germplasm accessions.

  1. The effect of cutting treatments on the dry matter production of Lolium perenne L. and Dactylis glomerata L.

    NARCIS (Netherlands)

    Pozo Ibanez, del M.

    1963-01-01

    The effect of cutting treatments on grass production was studied both in the field and in experiments under controlled conditions. Cutting limited the increase in dry matter for a certain time. Thereafter dry weight of plants continued to increase at the same proportional rate as in undisturbed plan

  2. Membrane-Filtered Olive Mill Wastewater: Quality Assessment of the Dried Phenolic-Rich Fraction.

    Science.gov (United States)

    Sedej, Ivana; Milczarek, Rebecca; Wang, Selina C; Sheng, Runqi; de Jesús Avena-Bustillos, Roberto; Dao, Lan; Takeoka, Gary

    2016-04-01

    A current trend in olive mill wastewater (OMWW) management is to not only decrease environmental pollution but also to extract and utilize valuable by-products. Therefore, the objectives of this study were to explore different techniques for drying a phenolic-rich membrane filtration fraction of OMWW and compare the techniques in terms of the dried product quality and feasibility of the process. The OMWW from 2 (3-phase and 2-phase) California mills was subjected to a 2-step membrane filtration process using a novel vibratory system. The reverse osmosis retentate (RO-R) is a phenolic-rich coproduct stream, and the reverse osmosis permeate is a near-pure water stream that could be recycled into the milling process. Spray-, freeze-, and infrared-drying were applied to obtain solid material from the RO-R. Drying of the RO-R was made possible only with addition of 10% maltodextrin as a carrier. The total soluble phenolics in dried RO-R were in the range 0.15 to 0.58 mg gallic acid equivalents/g of dry weight for 2-phase RO-R, and 1.38 to 2.17 mg gallic acid equivalents/g of dry weight for the 3-phase RO-R. Spray-dried RO-R from 3-phase OMWW showed remarkable antioxidant activity. Protocatechuic acid, tyrosol, vanillic acid, and p-coumaric acid were quantified in all dried RO-R, whereas 3-hydroxytyrosol was found in 3-phase dried RO-R. This combination of separation and drying technologies helps to add value and shelf-stability to an olive oil by-product and increase environmental sustainability of its production.

  3. Marijuana and body weight.

    Science.gov (United States)

    Sansone, Randy A; Sansone, Lori A

    2014-07-01

    Acute marijuana use is classically associated with snacking behavior (colloquially referred to as "the munchies"). In support of these acute appetite-enhancing effects, several authorities report that marijuana may increase body mass index in patients suffering from human immunodeficiency virus and cancer. However, for these medical conditions, while appetite may be stimulated, some studies indicate that weight gain is not always clinically meaningful. In addition, in a study of cancer patients in which weight gain did occur, it was less than the comparator drug (megestrol). However, data generally suggest that acute marijuana use stimulates appetite, and that marijuana use may stimulate appetite in low-weight individuals. As for large epidemiological studies in the general population, findings consistently indicate that users of marijuana tend to have lower body mass indices than nonusers. While paradoxical and somewhat perplexing, these findings may be explained by various study confounds, such as potential differences between acute versus chronic marijuana use; the tendency for marijuana use to be associated with other types of drug use; and/or the possible competition between food and drugs for the same reward sites in the brain. Likewise, perhaps the effects of marijuana are a function of initial weight status-i.e., maybe marijuana is a metabolic regulatory substance that increases body weight in low-weight individuals but not in normal-weight or overweight individuals. Only further research will clarify the complex relationships between marijuana and body weight.

  4. Concurrent weighted logic

    DEFF Research Database (Denmark)

    Xue, Bingtian; Larsen, Kim Guldstrand; Mardare, Radu Iulian

    2015-01-01

    We introduce Concurrent Weighted Logic (CWL), a multimodal logic for concurrent labeled weighted transition systems (LWSs). The synchronization of LWSs is described using dedicated functions that, in various concurrency paradigms, allow us to encode the compositionality of LWSs. To reflect these......-completeness results for this logic. To complete these proofs we involve advanced topological techniques from Model Theory....

  5. Adolescent Weight Status

    DEFF Research Database (Denmark)

    Holstein, Bjørn Evald; Due, Pernille; Brixval, Carina Sjöberg;

    2017-01-01

    day) communication with friends through cellphones, SMS messages, or Internet (1.66, 1.03-2.67). In the full population, overweight/obese weight status was associated with not perceiving best friend as a confidant (1.59, 1.11-2.28). No associations were found between weight status and number of close...

  6. Assessing Your Weight

    Science.gov (United States)

    ... only. To assess the weight of children or teenagers, see the Child and Teen BMI Calculator . Top of Page Want to learn more? Preventing Weight Gain Choosing a lifestyle that includes good eating habits and daily physical activity can help you maintain ...

  7. Weight loss - unintentional

    Science.gov (United States)

    ... of your weight loss. When to Contact a Medical Professional Call your health care provider if: You or a family member loses more ... to Expect at Your Office Visit The ... be asked questions about your medical history and symptoms, including: How much weight have ...

  8. Properties and Microstructural Characteristic of Kaolin Geopolymer Ceramics with Addition of Ultra High Molecular Weight Polyethylene

    Science.gov (United States)

    Ahmad, Romisuhani; Bakri Abdullah, Mohd Mustafa Al; Hussin, Kamarudin; Sandu, Andrei Victor; Binhussain, Mohammed; Ain Jaya, Nur

    2016-06-01

    In this paper, the mechanical properties and microstructure of kaolin geopolymer ceramics with addition of Ultra High Molecular Weight Polyethylene were studied. Inorganic polymers based on alumina and silica polysialate units were synthesized at room temperature from kaolin and sodium silicate in a highly alkaline medium, followed by curing and drying at 80 °C. Alkaline activator was formed by mixing the 12 M NaOH solution with sodium silicate at a ratio of 0.24. Addition of Ultra High Molecular Weight Polyethylene to the kaolin geopolymer are fabricated with Ultra High Molecular Weight Polyethylene content of 2, 4, 6 and 8 (wt. %) by using powder metallurgy method. The samples were heated at 1200 °C and the strength and morphological were tested. It was found that the flexural strength for the kaolin geopolymer ceramics with addition of UHMWPE were improved and generally increased with the increasing of UHMWPE loading. The result revealed that the optimum flexural strength was obtained at UHMWPE loading of 4 wt. % (92.1 MPa) and the flexural strength started to decrease. Microstructural analysis showed the samples appeared to have more number of pores and connected of pores increased with the increasing of UHMWPE content.

  9. Comprehensive US government program for dried plasma development.

    Science.gov (United States)

    Pusateri, Anthony E; Given, Michael B; Macdonald, Victor W; Homer, Mary J

    2016-03-01

    Transfusion of plasma early after severe injury has been associated with improved survival. There are significant logistic factors that limit the ability to deliver plasma where needed in austere environments, such as the battlefield or during a significant civilian emergency. While some countries have access to more logistically supportable dried plasma, there is no such product approved for use in the United States. There is a clear need for a Food and Drug Administration (FDA)-approved dried plasma for military and emergency-preparedness uses, as well as for civilian use in remote or austere settings. The Department of Defense (DoD) and Biomedical Advanced Research and Development Authority are sponsoring development of three dried plasma products, incorporating different technologic approaches and business models. At the same time, the DoD is sponsoring prospective, randomized clinical studies on the prehospital use of plasma. These efforts are part of a coordinated program to provide a dried plasma for military and civilian applications and to produce additional information on plasma use so that, by the time we have an FDA-approved dried plasma, we will better understand how to use it.

  10. Advantages on dry interim storage for spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Romanato, L.S. [Centro Tecnologico da Marinha em Sao Paulo, Av. Professor Lineu Prestes 2468, 05508-900 Sao Paulo (Brazil); Rzyski, B.M. [IPEN/ CNEN-SP, 05508-000 Sao Paulo (Brazil)]. e-mail: romanato@ctmsp.mar.mil.br

    2006-07-01

    When the nuclear fuel lose its ability to efficiently create energy it is removed from the core reactor and moved to a storage unit waiting for a final destination. Generally, the spent nuclear fuel (SNF) remains inside concrete basins with water within the reactors facility for the radioactive activity decay. Water cools the generated heat and shields radioactivity emissions. After some period of time in water basins the SNF can be sent to a definitive deposition in a geological repository and handled as radioactive waste or to reprocessing installations, or still wait for a future solution. Meanwhile, SNF remains stored for a period of time in dry or wet installations, depending on the method adopted by the nuclear power plant or other plans of the country. In many SNF wet storage sites the capacity can be fulfilled very quickly. If so, additional area or other alternative storage system should be given. There are many options to provide capacity increase in the wet storage area, but dry storages are worldwide preferred since it reduces corrosion concerns. In the wet storage the temperature and water purity should be constantly controlled whereas in the dry storage the SNF stands protected in specially designed canisters. Dry interim storages are practical and approved in many countries especially that have the 'wait and see' philosophy (wait to see new technologies development). This paper shows the advantages of dry interim storages sites in comparison with the wet ones and the nowadays problems as terrorism. (Author)

  11. A comparative study of beef quality after ageing longissimus muscle using a dry ageing bag, traditional dry ageing or vacuum package ageing.

    Science.gov (United States)

    Li, Xin; Babol, Jakub; Bredie, Wender L P; Nielsen, Belinda; Tománková, Jana; Lundström, Kerstin

    2014-08-01

    The objective of this study was to investigate beef quality of longissimus muscle after ageing in dry ageing bags, traditional dry ageing or vacuum for 8 or 19 days. Lower ageing weight loss, odour score and microbial growth were found in meat aged in dry ageing bags than after traditional dry ageing. The sensory panel detected no differences for most of the sensory attributes between samples using the two dry ageing methods, except for the odour of the cutting surface. The dry-aged steaks had more umami and butter fried meat taste compared with vacuum-aged steaks. Ageing time affected most of the sensory traits in this study, which improved as ageing time increased from 8 to 19 days. In a consumer test, meat aged for 21 days in dry ageing bags was preferred than the samples aged in vacuum. This may be due to the higher tenderness and juiciness obtained during storage in dry ageing bags than meat aged in vacuum.

  12. Weight discrimination and bullying.

    Science.gov (United States)

    Puhl, Rebecca M; King, Kelly M

    2013-04-01

    Despite significant attention to the medical impacts of obesity, often ignored are the negative outcomes that obese children and adults experience as a result of stigma, bias, and discrimination. Obese individuals are frequently stigmatized because of their weight in many domains of daily life. Research spanning several decades has documented consistent weight bias and stigmatization in employment, health care, schools, the media, and interpersonal relationships. For overweight and obese youth, weight stigmatization translates into pervasive victimization, teasing, and bullying. Multiple adverse outcomes are associated with exposure to weight stigmatization, including depression, anxiety, low self-esteem, body dissatisfaction, suicidal ideation, poor academic performance, lower physical activity, maladaptive eating behaviors, and avoidance of health care. This review summarizes the nature and extent of weight stigmatization against overweight and obese individuals, as well as the resulting consequences that these experiences create for social, psychological, and physical health for children and adults who are targeted. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. Effect of wetting-drying cycles on soil desiccation cracking behaviour

    Directory of Open Access Journals (Sweden)

    Tang Chao-Sheng

    2016-01-01

    Full Text Available Better understanding the desiccation cracking process is essential in analysing drought effects on soil hydraulic and mechanical properties through consideration of the atmosphere-ground interaction. Laboratory tests were conducted to investigate the consequence of wetting-drying cycles on the initiation and propagation characteristics of desiccation cracks on soil surface. Initially saturated slurry specimens were prepared and subjected to five subsequent wetting-drying cycles. Image processing technique was employed to quantitatively analyze the morphology characteristics of crack patterns formed during each drying path. The results show that the desiccation cracking behaviour of soil is significantly affected by the wetting-drying cycles. Before the third wetting-drying cycle is reached, the surface crack ratio and the average crack width increases while the average clod area decreases with increasing the number of wetting-drying cycles. The number of intersections and crack segments per unit area reaches the peak values after the second wetting-drying cycle. After the third wetting-drying cycle is reached, the effect of increasing wetting-drying cycles on crack patterns is insignificant. Moreover, it is observed that the applied wetting-drying cycles are accompanied by a continual reconstruction of soil structure. The initial homogenous slurry structure is completely replaced with aggregated structure after the third cycles, and a significant increase in the inter-aggregate porosity can be observed.

  14. No dry dock: safely strategy for avoiding unplanned dry dock and reducing safety, health and environment risks

    Energy Technology Data Exchange (ETDEWEB)

    Constantinis, Danny A.; Brett, David E. [EM and I Alliance, Cheshire (United Kingdom)

    2012-07-01

    There are currently over 150 operational FPUs with an expected increase of a further 100 units in the next 5 years. This results from several factors: increasing demand for hydrocarbons; new reserves in deep water; pipeline infrastructure is not required and FPU design fits many field requirements. FPUs are increasingly chosen for large, deep water, longer life developments. Units are bigger and more complex. Regulators and oil majors are imposing more stringent integrity requirements to protect against safety, environmental and operational risks related to loss of containment and loss of hull structure integrity which could lead to HSE risks, increased costs and production losses which would become particularly onerous should the unit have to dry dock. There are a number of other important components the context of asset integrity, e.g. mooring and sub sea systems, but these are outside the scope of this paper. The 'No Dry dock....Safely' approach is based on the principle of Criticality Based Integrity which identifies components whose integrity is critical to avoiding incidents and the risk of dry docking. Once critical components are identified the challenge is to establish integrity status and maintain fitness-for-service. Various JIPs e.g. the Hull Inspection Techniques and Strategies are looking at best practice inspection methodologies. The industry is progressing ways of maintaining and repairing critical items without going to dry dock. The challenges include coating maintenance, structural and pressure system repairs. Advances in cathodic protection and coating maintenance strategies are proving successful as are techniques for carrying out major structural repairs. The 'No Dry dock...Safely' methodology is a proven solution and case histories have been included. Technological advances will further improve integrity in the industry. There is no reason why FPUs cannot be kept on station and in production for 25 years or more whilst

  15. The determination of optimum condition in water hyacinth drying process by mixed adsorption drying method and modified fly ash as an adsorbent

    Science.gov (United States)

    Saputra, Asep Handaya; Putri, Rizky Anggreini

    2017-05-01

    Water hyacinth is an aquatic weed that has a very fast growth which makes it becomes a problem to the ecosystem. On the other hand, water hyacinth has a high fiber content (up to 20% by weight) which makes it potential to become raw material for composites and textile industries. As an aquatic plant, water hyacinth has a high initial moisture content that reaches more than 90%. Meanwhile the moisture content of fiber as a raw material for composite and textile industry should not be more than 10% to maintain the good quality of the products. Mixed adsorption drying method is one of the innovative method that can replace conventional drying process. Fluidization method which has been commonly used in agricultural and pharmaceutical products drying, can be enhanced by combining it with the adsorption method as performed in this study. In mixed fluidization-adsorption drying method, fly ash as adsorbent and water hyacinth fiber were put together into the fluidization column where the drying air evaporate the moisture content in water hyacinth fiber. In addition, the adsorbent adsorb the moisture content in the drying air to make the moisture content of the drying air remain low. The drying process is performed in various temperature and composition of water hyacinth and adsorbent in order to obtain the optimum drying condition. In addition, the effect of fly ash pellet and fly ash powder to the drying process was also performed. The result shows that the higher temperature and the more amount of adsorbent results in the faster drying rate. Fly ash pellet shows a better adsorption since it has a smaller pore diameter and wider surface area. The optimum temperature obtained from this study is 60°C and the optimum ratio of water hyacinth and fly ash is 50:50.

  16. Morphological characteristics of korean dried ginseng products.

    Science.gov (United States)

    Hong, Hee-Do; Cho, Chang-Won; Kim, Young-Chan; Kim, Eunyoung; Rhee, Young-Kyung; Rho, Jeonghae; Choi, Seung-Hoe

    2012-07-01

    The purpose of this study was to determine a standard quality characteristic through the evaluation and statistical analysis of the morphological characteristics of dried ginseng (white ginseng) products. Samples of 4-year-old 30 and 50 piece grade curved ginseng and 5-year-old 25 and 15 piece grade straight ginseng products were collected from a market, with 5 to 10 packs of each product being collected annually over a 5-year period (2006-2010). Morphological characteristics, such as weight, length, diameter, and surface color, were measured and statistically analyzed to present a standard quality characteristic value using mean±3SD, a range that excluded outlier. The 4-year-old curved ginseng samples of 50 and 30 piece grade were 4.80 to 6.12 cm and 5.28 to 7.60 cm long, 0.22 to 1.70 cm and 0.21 to 2.07 cm wide, and weighed 5.28 to 7.40 g and 8.62 to 12.26 g, respectively. The 5-year-old straight ginseng samples of 25 and 15 piece grade were 9.66 to 15.47 cm and 10.66 to 16.80 cm long, 1.32 to 1.94 cm and 1.48 to 2.43 cm wide, and weighed 9.18 to 16.40 g and 15.89 to 24.82 g, respectively. The surface color of the different piece grades in the same type of dried ginseng product was similar, whereas the straight ginseng demonstrated a lower level of brightness, but the relative redness and yellowness were of higher levels, than that of curved ginseng.

  17. Dry matter production of perennial pasture Tifton 85 (Cynodon spp under different doses of fertilization

    Directory of Open Access Journals (Sweden)

    Karlize Prigol

    2012-12-01

    Full Text Available Dairy farming is an activity that provides the small rural farmer the opportunity to earn income in small areas of land. The perennial pastures represent a source for a cheap and nutritious diet for the animals. The correct management of perennial pastures can be the key to sustainability in the dairy business, resulting in the preservation or recovery of the balance of a pasture system, starting with the pursuit of production with low costs and good pasture production per unit area. The correct choice of fertilizer is of great importance to ensure the continuous production of pasture both in quantity and in quality. The aim of this study was to evaluate the dry matter production of perennial pasture consisting of Tifton 85 (Cynodon spp under different nutrient sources on a typical dystrophic Red Latosol, presents in a region where the climate is characterized as humid-mesothermic with a hot summer, Cfa according to Köppen, with an average annual rainfall of 2039 mm, well distributed throughout the year and average annual temperatures around 18 º C, varying monthly from 14.1 to 23 º C. The treatments consisted of three nutrient sources: 1 organic manure, a base of chicken bedding (average values of reference NPK (02/03/02, 2 organic manure + mineral - organic mineral, with application of 606 kg ha-1 (04/10/10 Formula, aiming to adjust the same amounts of NPK supplied by mineral fertilizer and, 3 Mineral. The experimental design was a randomized blocks with nine replications. We collected five samples of each pasture treatment for determination of the average. After cutting the pasture of Tifton 85, the samples were subjected to weighing for determination of wet weight and then taken to the drying oven (temperature 65 ° C for 72 hours to determine dry matter production. The statistical analysis was performed with SAS for Windows computer system (SAS and the results submitted to the Tukey test at 5%. The highest dry matter yield (kg ha-1 was

  18. Evaluation of a solar-biomass-rock bed storage drying system, and its application for chilli drying

    Energy Technology Data Exchange (ETDEWEB)

    Augustus Leon, M.; Kumar, S. [Energy Field of Study, Asian Inst. of Tech. Klong Luang, Pathumthani (Thailand)

    2008-07-01

    A renewable energy-based air heating system that does not require a conventional auxiliary heater, but can still meet a daily load fraction exceeding 90% and supply hot air at a steady temperature and flow rate continuously for 24 hours a day, has been developed. It combines an unglazed transpired solar collector (UTC), rock bed, and a biomass gasifier stove with heat exchanger. The system utilises part of the rock bed to supply supplementary heat. The UTC supplies the required hot air during the day (to meet the load), and the stove-heat exchanger unit supplies hot air to the rock bed (to charge it), also during the daytime. The rock bed stores the thermal energy during the daytime, and supplies heat during off-sunshine hours - both during day and night. The system was evaluated by drying 22 kg of red chilli, using hot air at 60 C and 90 m{sup 3}/h, from an initial moisture content of 76.7% (w.b) to 8.4% over 32.5 hours of continuous drying. The dryer contributed to a reduction of 66% in drying time compared to open sun drying. The temperature of hot air supplied was stable at 60{+-}3 C for over 24 hours during the entire drying duration. Providing a load fraction of 91.6% during the 24-hour operation, the air heating system can successfully dry red chilli in a continuous drying operation, at required air temperature and flow rate, which can be maintained fairly constant. (orig.)

  19. Effect of SO2 Dry Deposition on Porous Dolomitic Limestones

    Science.gov (United States)

    Olaru, Mihaela; Aflori, Magdalena; Simionescu, Bogdana; Doroftei, Florica; Stratulat, Lacramioara

    2010-01-01

    The present study is concerned with the assessment of the relative resistance of a monumental dolomitic limestone (Laspra – Spain) used as building material in stone monuments and submitted to artificial ageing by SO2 dry deposition in the presence of humidity. To investigate the protection efficiency of different polymeric coatings, three commercially available siloxane-based oligomers (Lotexan-N, Silres BS 290 and Tegosivin HL 100) and a newly synthesized hybrid nanocomposite with silsesquioxane units (TMSPMA) were used. A comparative assessment of the data obtained in this study underlines that a better limestone protection was obtained when treated with the hybrid nanocomposite with silsesquioxane units.

  20. Effect of SO2 Dry Deposition on Porous Dolomitic Limestones

    Directory of Open Access Journals (Sweden)

    Florica Doroftei

    2010-01-01

    Full Text Available The present study is concerned with the assessment of the relative resistance of a monumental dolomitic limestone (Laspra – Spain used as building material in stone monuments and submitted to artificial ageing by SO2 dry deposition in the presence of humidity. To investigate the protection efficiency of different polymeric coatings, three commercially available siloxane-based oligomers (Lotexan-N, Silres BS 290 and Tegosivin HL 100 and a newly synthesized hybrid nanocomposite with silsesquioxane units (TMSPMA were used. A comparative assessment of the data obtained in this study underlines that a better limestone protection was obtained when treated with the hybrid nanocomposite with silsesquioxane units.

  1. Clay as a matrix former for spray drying of drug nanosuspensions.

    Science.gov (United States)

    Dong, Yuancai; Ng, Wai Kiong; Hu, Jun; Shen, Shoucang; Tan, Reginald B H

    2014-04-25

    Utilization of sugars (e.g. lactose, sucrose) as matrix formers for spray drying of drug nanosuspensions is associated with two drawbacks: (1) sugars are incapable of preventing agglomeration of drug nanoparticles (NPs) in the suspension state; and (2) the spray-dried sugars are usually amorphous and hygroscopic. This work aimed to apply a clay, montmorillonite (MMT) as an alternative matrix former for spray drying of drug nanosuspensions with fenofibrate (feno) as a model compound. Drug nanosuspensions were synthesized by liquid antisolvent precipitation with different amount of MMT followed by spray drying. It is found that MMT is able to reduce the agglomeration of drug nanoparticles in the suspension state, as observed from the gradual alleviation of the clogging with the increased clay during the spray drying. The spray-dried feno NPs/MMT powders exhibited a much lower moisture sorption than spray-dried feno NPs/lactose powders as evidenced by the dynamic vapor sorption (DVS) analysis. The dissolution within 5 min for the spray-dried feno NPs/MMT powders at drug:MMT weight ratio of 1:3 was 81.4 ± 1.8% and the total dissolution within 60 min was 93.4 ± 0.9%. Our results demonstrate that MMT is a useful matrix former for preservation of the high dissolution rate of nanosized drug particles after drying.

  2. Effect of Steam Blanching and Drying on Phenolic Compounds of Litchi Pericarp.

    Science.gov (United States)

    Kessy, Honest N E; Hu, Zhuoyan; Zhao, Lei; Zhou, Molin

    2016-06-03

    The effects of different treatment methods on the stability and antioxidant capacity of the bioactive phenolic compounds of litchi pericarps were investigated. Fresh litchi pericarps were open air-dried, steam-blanched for 3 min in combination with hot air oven drying at 60 and 80 °C, and unblanched pericarps were dried in a hot air oven at 40, 60, 70 and 80 °C until equilibrium weight was reached. The total phenolic compounds, flavonoids, anthocyanins, proanthocyanidins and individual procyanidins, and antioxidant activity were analyzed. The combination of blanching and drying at 60 °C significantly (p phenolic compounds, individual procyanidins, and the extracts' antioxidant capacity compared with the unblanched hot air oven-dried and open air-dried pericarps. Drying of fresh unblanched litchi pericarps in either open air or a hot air oven caused significant losses (p phenolic compounds and individual procyanidins, leading to a reduction in the antioxidant activity. A similar increase, retention or reduction was reflected in flavonoids, proanthocyanidins and anthocyanins because they are sub-groups of phenolic compounds. Ferric reducing antioxidant power (FRAP) and 1,1-diphenyl-2-picryldydrazyl (DPPH) radical-scavenging capacity of the treated pericarps were significantly correlated (r ≥ 0.927, p phenolic compounds. Thus, the combination of steam blanching and drying treatments of fresh litchi pericarps could produce a stable and dry litchi pericarp that maintains phenolic compounds and antioxidant capacity as a raw material for further recovery of the phytochemicals.

  3. ORDERED WEIGHTED DISTANCE MEASURE

    Institute of Scientific and Technical Information of China (English)

    Zeshui XU; Jian CHEN

    2008-01-01

    The aim of this paper is to develop an ordered weighted distance (OWD) measure, which is thegeneralization of some widely used distance measures, including the normalized Hamming distance, the normalized Euclidean distance, the normalized geometric distance, the max distance, the median distance and the min distance, etc. Moreover, the ordered weighted averaging operator, the generalized ordered weighted aggregation operator, the ordered weighted geometric operator, the averaging operator, the geometric mean operator, the ordered weighted square root operator, the square root operator, the max operator, the median operator and the min operator axe also the special cases of the OWD measure. Some methods depending on the input arguments are given to determine the weights associated with the OWD measure. The prominent characteristic of the OWD measure is that it can relieve (or intensify) the influence of unduly large or unduly small deviations on the aggregation results by assigning them low (or high) weights. This desirable characteristic makes the OWD measure very suitable to be used in many actual fields, including group decision making, medical diagnosis, data mining, and pattern recognition, etc. Finally, based on the OWD measure, we develop a group decision making approach, and illustrate it with a numerical example.

  4. Solar drying of jack fruit almonds

    OpenAIRE

    Alexandre J. de M. Queiroz; Dantas,Hermeval J; Figueirêdo,Rossana M. F. de; Karla dos S Melo

    2011-01-01

    Dryers heated by solar energy have been constructed and used in drying whole and half jack fruit almonds. The samples were dried during the day in direct sun and in the conventional solar dryer prepared for this purpose. Another piece of equipment was built for reception and accumulation of sun energy in a body of water, which was used as a heat source for night drying. The drying with the sun energy was compared with artificial drying. The jack fruit almonds were dried whole, half, with pell...

  5. Magnetic field switchable dry adhesives.

    Science.gov (United States)

    Krahn, Jeffrey; Bovero, Enrico; Menon, Carlo

    2015-02-01

    A magnetic field controllable dry adhesive device is manufactured. The normal adhesion force can be increased or decreased depending on the presence of an applied magnetic field. If the magnetic field is present during the entire normal adhesion test cycle which includes both applying a preloading force and measuring the pulloff pressure, a decrease in adhesion is observed when compared to when there is no applied magnetic field. Similarly, if the magnetic field is present only during the preload portion of the normal adhesion test cycle, a decrease in adhesion is observed because of an increased stiffness of the magnetically controlled dry adhesive device. When the applied magnetic field is present during only the pulloff portion of the normal adhesion test cycle, either an increase or a decrease in normal adhesion is observed depending on the direction of the applied magnetic field.

  6. Drying characteristics of ultrasound assisted hot air drying of Flos Lonicerae

    OpenAIRE

    LIU, YUNHONG; Sun, Yue; Miao, Shuai; Li, Fang; Luo, Denglin

    2014-01-01

    Ultrasound assisted hot air drying of Flos Lonicerae was investigated in this study. The effects of drying parameters such as ultrasonic radiation distance, ultrasonic power and drying temperature on drying characteristics were discussed. The results showed that ultrasound application has positive and significant effects on hot air drying. Shortening ultrasonic radiation distance is beneficial to improve both ultrasonic energy efficiency and drying rate. Higher ultrasonic power had more posit...

  7. Light-assisted drying (LAD) of small volume biologics: a comparison of two IR light sources

    Science.gov (United States)

    Young, Madison A.; Van Vorst, Matthew; Elliott, Gloria D.; Trammell, Susan R.

    2016-03-01

    Protein therapeutics have been developed to treat diseases ranging from arthritis and psoriasis to cancer. A challenge in the development of protein-based drugs is maintaining the protein in the folded state during processing and storage. We are developing a novel processing method, light-assisted drying (LAD), to dehydrate proteins suspended in a sugar (trehalose) solution for storage at supra-zero temperatures. Our technique selectively heats the water in small volume samples using near-IR light to speed dehydration which prevents sugar crystallization that can damage embedded proteins. In this study, we compare the end moisture content (EMC) as a function of processing time of samples dried with two different light sources, Nd:YAG (1064 nm) and Thulium fiber (1850 nm) lasers. EMC is the ratio of water to dry weight in a sample and the lower the EMC the higher the possible storage temperature. LAD with the 1064 and 1850 nm lasers yielded 78% and 65% lower EMC, respectively, than standard air-drying. After 40 minutes of LAD with 1064 and 1850 nm sources, EMCs of 0.27+/-.27 and 0.15+/-.05 gH2O/gDryWeight were reached, which are near the desired value of 0.10 gH2O/gDryWeight that enables storage in a glassy state without refrigeration. LAD is a promising new technique for the preparation of biologics for anhydrous preservation.

  8. Relationship between moisture content and electrical impedance of carrot slices during drying

    Science.gov (United States)

    Kertész, Ákos; Hlaváčová, Zuzana; Vozáry, Eszter; Staroňová, Lenka

    2015-01-01

    Electrical properties of food materials can give information about the inner structure and physiological state of biological tissues. Generally, the process of drying of fruits and vegetables is followed by weight loss. The aim of this study was to measure the impedance spectra of carrot slices during drying and to correlate impedance parameters to moisture content in different drying periods. Cylindrical slices were cut out from the carrot root along the axis. The slices were dried in a Venticell 111 air oven at 50°C. The weight of the slices was measured with a Denver SI-603 electronic analytical and precision balance. The weighing of the samples was performed every 30 min at the beginning of drying and every 60 min after the process. The moisture content of the samples was calculated on wet basis. The magnitude and phase angle of electrical impedance of the slices were measured with HP 4284A and 4285A precision LCR meters in the frequency range from 30 Hz to 1 MHz and from 75 kHz to 30 MHz, respectively, at voltage 1 V. The impedance measurement was performed after weighting. The change in the magnitude of impedance during drying showed a good correlation with the change in the moisture content.

  9. A Stray Field Magnetic Resonance Imaging Study of the Drying of Sodium Silicate Films.

    Science.gov (United States)

    Hughes; McDonald; Rhodes; Rockliffe; Smith; Wills

    1996-01-15

    Stray field magnetic resonance imaging (STRAFI) is shown to be highly suited to the study of drying processes in thin films. Sodium silicate films have been chosen as a model system exhibiting many of the properties of film drying in general. Films have been dried, as a function of temperature in the range 22 to 62 degrees C, down to water contents of order 28% by weight, at which stage the film is glassy. The experimental results have been quantitatively analyzed by treating the drying film as a colloidal solution. The results suggest that the localized hydrogen spin-spin relaxation time, and hence the mobility of the water in the films is independent of the drying regime and depends primarily on the local water concentration.

  10. Drying poly(ethylene glycol)

    OpenAIRE

    sprotocols

    2015-01-01

    Authors: Lucas Kinard, Kurtis Kasper & Antonios Mikos ### Abstract This protocol describes the drying of poly(ethylene glycol) (PEG) by a simple 6 step procedure. One can implement this protocol using common lab glass and lab equipment. Water is removed from PEG by azeotropic distillation in toluene. The two components are mixed and toluene and water are distilled off by heating the solution to 170°C. This procedure can be implemented in ~2 h. ### Introduction In many ...

  11. Increasing the weight of minimum spanning trees

    Energy Technology Data Exchange (ETDEWEB)

    Frederickson, G.N.; Solis-Oba, R. [Purdue Univ., West Lafayette, IN (United States)

    1996-12-31

    Given an undirected connected graph G and a cost function for increasing edge weights, the problem of determining the maximum increase in the weight of the minimum spanning trees of G subject to a budget constraint is investigated. Two versions of the problem are considered. In the first, each edge has a cost function that is linear in the weight increase. An algorithm is presented that solves this problem in strongly polynomial time. In the second version, the edge weights are fixed but an edge can be removed from G at a unit cost. This version is shown to be NP-hard. An {Omega}(1/ log k)-approximation algorithm is presented for it, where k is the number of edges to be removed.

  12. Uniaxial tension of drying sieves

    Directory of Open Access Journals (Sweden)

    Bojić Nada V.

    2013-01-01

    Full Text Available Although the literature contains numerous studies that have been developed to describe the nonlinear behavior of drying sieves' operation, there are no papers in this which report deeper investigation of the drying sieve behavior when exposed to tension and thermo stabilization. The aim of this paper is to provide insight into the elastoplastic behavior of the thermo stabilized and not stabilized sieves subjected to the tensile force. Within this work both theoretical and experimental investigations were performed. The sieves were joined by using a spiral. In separate experiments tests of wire base and weft of the weave mesh were performed, both for thermo stabilized and not thermo stabilized sieves, sieves joining and the sieve thermo stabilization itself. It was established that the thermo stabilization of sieves provides for stability of sieves' dimensions and that open thermo stabilized drying sieve exhibits better mechanical properties and exploitation characteristics then the sieves joining. [Projekat Ministarstva nauke Republike Srbije, br. ON174004: Micromechanics criteria of damage and fracture and br. TR 32036: Development of software for solving the coupled multi-physical problems

  13. Novel method for concentrating and drying polymeric nanoparticles: hydrogen bonding coacervate precipitation.

    Science.gov (United States)

    D'Addio, Suzanne M; Kafka, Concepcion; Akbulut, Mustafa; Beattie, Patrick; Saad, Walid; Herrera, Margarita; Kennedy, Michael T; Prud'homme, Robert K

    2010-04-01

    Nanoparticles have significant potential in therapeutic applications to improve the bioavailability and efficacy of active drug compounds. However, the retention of nanometer sizes during concentrating or drying steps presents a significant problem. We report on a new concentrating and drying process for poly(ethylene glycol) (PEG) stabilized nanoparticles, which relies upon the unique pH sensitive hydrogen bonding interaction between PEG and polyacid species. In the hydrogen bonding coacervate precipitation (HBCP) process, PEG protected nanoparticles rapidly aggregate into an easily filterable precipitate upon the addition various polyacids. When the resulting solid is neutralized, the ionization of the acid groups eliminates the hydrogen bonded structure and the approximately 100 nm particles redisperse back to within 10% of their original size when poly(acrylic acid) and citric acid are used and 45% when poly(aspartic acid) is used. While polyacid concentrations of 1-5 wt % were used to form the precipitates, the incorporation of the acid into the PEG layer is approximately 1:1 (acid residue):(ethylene oxide unit) in the final dried precipitate. The redispersion of dried beta-carotene nanoparticles protected with PEG-b-poly(lactide-co-glycolide) polymers dried by HBCP was compared with the redispersion of particles dried by freeze-drying with sucrose as a cryprotectant, spray freeze-drying, and normal drying. Freeze-drying with 0, 2, and 12 wt % sucrose solutions resulted in size increases of 350%, 50%, and 6%, respectively. Spray freeze-drying resulted in particles with increased sizes of 50%, but no cryoprotectant and only moderate redispersion energy was required. Conventional drying resulted in solids that could not be redispersed back to nanometer size. The new HBCP process offers a promising and efficient way to concentrate or convert nanoparticle dispersions into a stable dry powder form.

  14. Sugars as bulking agents to prevent nano-crystal aggregation during spray or freeze-drying.

    Science.gov (United States)

    Kumar, Sumit; Gokhale, Rajeev; Burgess, Diane J

    2014-08-25

    In this study, the effect of low and high molecular weight sugars on indomethacin nano-crystalline suspension powders prepared by spray or freeze-drying was evaluated. Dowfax 2A1 (negatively charged surfactant) was utilized as indomethacin nanosuspensions stabilizer. Dried crystalline powders with or without sugars were characterized for crystallinity, particle size and powder yield. Interactions between the nanosuspension stabilizer (i.e. Dowfax 2A1) and sugars were investigated by utilizing IR spectroscopy and contact angle measurements. The nanosuspension formulations containing small molecular weight sugars were non-aggregating compared to those containing polysaccharides. Additionally, higher powder yields were observed with formulations containing sugars with higher glass transition temperature during spray drying. The formulations containing low glass transition temperature sugars were sticking to the spray drier glass walls and thus resulted in lower yields. The small molecular weight sugars showed favorable interactions with Dowfax 2A1, as evident by the IR and contact angle data, possibly resulting in minimal nano-crystal aggregation during spray or freeze-drying. A combination of sugars (i.e. small molecular weight and polysaccharides) may be utilized to achieve higher spray-drying yields and non-aggregating nano-crystalline powders.

  15. Prizes for weight loss.

    Science.gov (United States)

    Englberger, L.

    1999-01-01

    A programme of weight loss competitions and associated activities in Tonga, intended to combat obesity and the noncommunicable diseases linked to it, has popular support and the potential to effect significant improvements in health. PMID:10063662

  16. Your Child's Weight

    Science.gov (United States)

    ... Some kids and teens are underweight because of eating disorders , like anorexia or bulimia, which ... weight. People from different races, ethnic groups, and nationalities tend to have different body fat ...

  17. Weight Gain during Pregnancy

    Science.gov (United States)

    ... Global Map Premature birth report card Careers Archives Pregnancy Before or between pregnancies Nutrition, weight & fitness Prenatal ... virus and pregnancy Folic acid Medicine safety and pregnancy Birth defects prevention Learn how to help reduce ...

  18. Preventing Weight Gain

    Science.gov (United States)

    ... this page, enter your email address: Enter Email Address What's this? Submit What's this? Submit Button About Us Division Information Nutrition Physical Activity Overweight & Obesity Healthy Weight Breastfeeding Micronutrient Malnutrition ...

  19. Weighted Multiplex Networks

    CERN Document Server

    Menichetti, Giulia; Panzarasa, Pietro; Mondragón, Raúl J; Bianconi, Ginestra

    2013-01-01

    One of the most important challenges in network science is to quantify the information encoded in complex network structures. Disentangling randomness from organizational principles is even more demanding when networks have a multiplex nature. Multiplex networks are multilayer systems of $N$ nodes that can be linked in multiple interacting and co-evolving layers. In these networks, relevant information might not be captured if the single layers were analyzed separately. Here we demonstrate that such partial analysis of layers fails to capture significant correlations between weights and topology of complex multiplex networks. To this end, we study two weighted multiplex co-authorship and citation networks involving the authors included in the American Physical Society. We show that in these networks weights are strongly correlated with multiplex structure, and provide empirical evidence in favor of the advantage of studying weighted measures of multiplex networks, such as multistrength and the inverse multipa...

  20. Antioxidant capacity and polyphenolic content of dried wild edible mushrooms from Poland.

    Science.gov (United States)

    Radzki, Wojciech; Sławińska, Aneta; Jabłońska-Ryś, Ewa; Gustaw, Waldemar

    2014-01-01

    In this study 6 species of wild edible mushrooms were evaluated in terms of their total phenolic content and antioxidant activity using 1,1-diphenyl-2-picrylhydrazyl radical and ferric reducing antioxidant power assay methods. The mushrooms, namely Armillaria mellea, Cantharellus cibarius, Lactarius deliciosus, Leccinum aurantiacum, Suillus luteus, and Boletus badius, were dried using both freeze drying and convection drying at 50°C. The amounts of phenolic compounds varied from 3.0 ± 0.1 to 12.8 ± 0.4 mg gallic acid equivalents/g dry weight (for water extracts) and from 2.4 ± 0.1 to 11 ± 0.5 mg gallic acid equivalents/g dry weight (for ethanolic extracts). The species that presented the highest antioxidant potential were B. badius and S. luteus. The impact of hot-air drying on the antioxidant activity of water and ethanolic extracts was evaluated. We demonstrated that hot-air drying may have either a negative or positive influence on phenolics and antioxidant activity, depending on the mushroom species. However, a negative effect was more frequent.

  1. A novel method to produce dry geopolymer cement powder

    Directory of Open Access Journals (Sweden)

    H.A. Abdel-Gawwad

    2016-04-01

    Full Text Available Geopolymer cement is the result of reaction of two materials containing aluminosilicate and concentrated alkaline solution to produce an inorganic polymer binder. The alkali solutions are corrosive and often viscous solutions which are not user friendly, and would be difficult to use for bulk production. This work aims to produce one-mix geopolymer mixed water that could be an alternative to Portland cement by blending with dry activator. Sodium hydroxide (SH was dissolved in water and added to calcium carbonate (CC then dried at 80 °C for 8 h followed by pulverization to a fixed particle size to produce the dry activator consisting of calcium hydroxide (CH, sodium carbonate (SC and pirssonite (P. This increases their commercial availability. The dry activator was blended with granulated blast-furnace slag (GBFS to produce geopolymer cement powder and by addition of water; the geopolymerization process is started. The effect of W/C and SH/CC ratio on the physico-mechanical properties of slag pastes was studied. The results showed that the optimum percent of activator and CC content is 4% SH and 5% CC, by the weight of slag, which give the highest physico-mechanical properties of GBFS. The characterization of the activated slag pastes was carried out using TGA, DTG, IR spectroscopy and SEM techniques.

  2. Homotopy weighted colimits

    CERN Document Server

    Vokřínek, Lukáš

    2012-01-01

    Let V be a cofibrantly generated closed symmetric monoidal model category and M a model V-category. We say that a weighted colimit W*D of a diagram D weighted by W is a homotopy weighted colimit if the diagram D is pointwise cofibrant and the weight W is cofibrant in the projective model structure on [C^op,V]. We then proceed to describe such homotopy weighted colimits through homotopy tensors and ordinary (conical) homotopy colimits. This is a homotopy version of the well known isomorphism W*D=\\int^C(W\\tensor D). After proving this homotopy decomposition in general we study in some detail a few special cases. For simplicial sets tensors may be replaced up to weak equivalence by conical homotopy colimits and thus the weighted homotopy colimits have no added value. The situation is completely different for model dg-categories where the desuspension cannot be constructed from conical homotopy colimits. In the last section we characterize those V-functors inducing a Quillen equivalence on the enriched presheaf c...

  3. DRYING WITH SOLAR COLLECTOR BY HEAT PIPE

    Directory of Open Access Journals (Sweden)

    Hikmet DOĞAN

    1999-01-01

    Full Text Available In this research, heating pipe was used in the solar collector in order to take better advantage of the solar energy. The energy obtained from the sun was transferred to the drying air by means of heating pipes and this hot air was blown on the material to be dried. The water on the material to be dried vaporised with the effect of the hot air and drying took place. Because drying took place in the shade, distant from the direct radiation effects of the sun, some of the disadvantages seen in drying outside, under the sun were eliminated. Additionally, it was observed that it took less time to dry in this method than it takes to dry under the open sun.

  4. ENVIRONMENTAL ASPECTS OF THE INTENSIFICATION CONVECTIVE DRYING

    Directory of Open Access Journals (Sweden)

    A. M. Gavrilenkov

    2012-01-01

    Full Text Available Identified and analyzed the relationship of the intensity convective drying and air pollution emissions of heat. The ways to reduce the thermal pollution of the atmosphere at convective drying.

  5. Computer-based Reverse Engineering of a Manual Weighting ...

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-06-01

    Jun 1, 2013 ... Keywords: Reverse Engineering, Weighting Spring balance, Systematic reconstruction, Digital interface, Digital ... Our body, food we eat and ... video display unit a corresponding and the ... structure, function, and operation.

  6. Dry needling — peripheral and central considerations

    OpenAIRE

    Dommerholt, Jan

    2011-01-01

    Dry needling is a common treatment technique in orthopedic manual physical therapy. Although various dry needling approaches exist, the more common and best supported approach targets myofascial trigger points. This article aims to place trigger point dry needling within the context of pain sciences. From a pain science perspective, trigger points are constant sources of peripheral nociceptive input leading to peripheral and central sensitization. Dry needling cannot only reverse some aspects...

  7. Parameterization of almanac crop simulation model for non-irrigated dry bean in semi-arid temperate areas in Mexico

    OpenAIRE

    Alma Delia Baez-Gonzalez; James R. Kiniry; Jose Saul Padilla Ramirez; Guillermo Medina Garcia; Jose Luis Ramos Gonzalez; Esteban Salvador Osuna Ceja

    2015-01-01

    Dry bean simulation models can be used to make management decisions when properly parameterized. This study aimed to parameterize the ALMANAC (Agricultural Land Management Alternatives with Numerical Assessment Criteria) crop simulation model for dry bean in the semi-arid temperate areas of Mexico. The parameterization process was based on data from two important non-irrigated dry bean fields in Mexico. The parameters were potential heat units (PHU), leaf area index (LAI) and harvest index (H...

  8. 21 CFR 131.149 - Dry cream.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Dry cream. 131.149 Section 131.149 Food and Drugs... CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.149 Dry cream. (a) Description. Dry cream is the product obtained by removal of water only from pasteurized milk or cream or...

  9. Drying of willow biomass in supply chains

    NARCIS (Netherlands)

    Gigler, J.K.

    2000-01-01

    The drying process of willow ( Salix viminalis ) in biomass supply chains to energy plants is quantitatively described. Drying at particle level was modelled for chips and stems by a diffusion equation linked to the mass transfer of moisture to the air. Drying at bulk level is described by a deep be

  10. Drying of willow biomass in supply chains

    NARCIS (Netherlands)

    Gigler, J.

    2000-01-01

    The drying process of willow ( Salix viminalis ) in biomass supply chains to energy plants is quantitatively described. Drying at particle level was modelled for chips and stems by a diffusion equation linked to the mass transfer of moisture to the air. Drying at bulk

  11. Augmented dry cooling surface test program: analysis and experimental results

    Energy Technology Data Exchange (ETDEWEB)

    Parry, H.L.; MacGowan, L.J.; Kreid, D.K.; Wiles, L.E.; Faletti, D.W.; Johnson, B.M.

    1979-09-01

    Experiments were performed to assess the operating characteristics and potential performance of water-augmented dry cooling systems. The work was aimed at evaluating a deluged air-cooled HOETERV plate fin heat exchanger surface proposed for integrated dry/wet cooling systems and using test results to guide the development of a predictive analytical model. In the process, all-dry performance data were obtained for the HOETERV surface as well as for two Curtiss-Wright chipped fin surfaces. The dry heat transfer data indicate that a slotted Curtiss-Wright surface slightly outperforms the HOETERV and nonslotted Curtiss-Wright surfaces based on heat rejection rate per unit of fan power. However, all three surfaces are so close in performance that other factors, such as surface cost and piping and mounting costs, will probably determine which surface is preferred at a given installation. Comparisons of deluged HOETERV performance with dry HOETERV and Curtiss-Wright performance under prototypic conditions have established that deluging can provide considerable heat rejection enhancement, particularly at low ITD and low air humidity. A deluged HOETERV core operating at a 115/sup 0/F primary fluid temperature in 105/sup 0/F air at 10% relative humidity can reject over 7 times as much heat as a dry HOETERV core operating under the same conditions at the same air-side pressure drop. Deluged tests were performed to evaluate the effect of airflow rate, deluge flow rate and core tilt angle on performance. Both increased airflow and increased deluge flow increase both heat rejection rate and required fan power. Optimal airflow rate will thus be determined for a given location by the competing costs of heat exchanger surface area versus fan operation. Changes in core tilt angle from vertical to 16/sup 0/ from vertical have a negligible effect on performance.

  12. PERTINENT DRY NEEDLING CONSIDERATIONS FOR MINIMIZING ADVERSE EFFECTS - PART TWO.

    Science.gov (United States)

    Halle, John S; Halle, Rob J

    2016-10-01

    Dry needling (DN) is an evidence based treatment technique that is accepted and used by physical therapists in the United States. This clinical commentary is the second in a two-part series outlining some of the pertinent anatomy and other issues that are needed for optimal utilization of this treatment modality. Part one was an overview of the thorax with a summary of reported adverse effects (AEs) and the underlying anatomy that could be used to minimize patient risk. As is the case with any intervention, the technique of dry needling has some inherent patient risk. The incidence of AEs with this procedure is typically low, ranging from zero to approximately 10 percent. Knowledge of the underlying anatomy can be a key factor associated with decreasing the likelihood of an AE. The second part of this clinical commentary goes beyond the thorax, to explore the anatomy associated with dry needling the abdomen, pelvis, and back. In the abdomen, pelvis and back, dry needling can penetrate the peritoneal cavity or adjacent organs, resulting in AEs. A physiological reaction that is an AE secondary to a needle insertion, pain or fear, is an autonomic vasovagal response. Additionally, suggestions for dealing with the fearful patient, the obese patient, universal precautions, and other clinical considerations, are discussed. The purpose of parts one and part two of this clinical commentary is to minimize the risk of a dry needling AE. Dry needling is an effective adjunctive treatment procedure that is within the recognized scope of practice of the physical therapist. An evidence-based implementation of the procedure must be based on a thorough understanding of the underlying anatomy and the potential risks, with risks communicated to patients via informed consent. Level 5.

  13. The relationship between prevalence and duration of weight loss strategies and weight loss among overweight managed care organization members enrolled in a weight loss trial

    Directory of Open Access Journals (Sweden)

    Jeffery Robert W

    2006-02-01

    Full Text Available Abstract Background Many adults in the United States report engaging in weight loss behaviors. The current study examined weight loss strategies among managed care organization members, to determine the prevalence and impact of weight loss behaviors in this population. We hypothesized that greater engagement in weight loss strategies would be associated with greater weight loss success. Methods Data were taken from Weigh-to-Be (WTB, a two-year weight loss trial (N = 1801, 72% female, mean age = 50.7 years, mean weight = 95.9 kg, mean BMI = 34.2 kg/m2. Every six months, participants completed a questionnaire assessing frequency and duration of weight loss strategies (calorie reduction, fat reduction, increased fruit/vegetable intake, increased exercise, elimination of sweets, consumption of less food. General linear models and structural equation methods were used to examine associations between weight loss strategy use and weight change over time. Results Weight loss strategy prevalence rates ranged from 68% to 76% over two years. For all dietary strategies, any use of the strategy between baseline and 24 months was associated with weight loss at 24 months; those who did not engage in the strategy showed weight gains during that period. Results of general linear models and structural equation models indicated that increased use of weight loss strategies was significantly associated with greater 24-month weight loss. Conclusion The prevalence of weight loss strategies in this obese adult managed care population was quite high, and use of these strategies was associated in dose-response fashion with better weight loss. Future interventions may benefit from emphasis on persistence of similar strategies to achieve more successful outcomes.

  14. The distribution of fat in dried dairy particles determines flavor release and flavor stability.

    Science.gov (United States)

    Park, C W; Drake, M A

    2014-04-01

    Dried dairy ingredients are utilized in various food and beverage applications for their nutritional, functional, and sensory properties. Dried dairy ingredients include milk powders of varying fat content and heat treatment and buttermilk powder, along with both milk and whey proteins of varying protein contents. The flavor of these ingredients is the most important characteristic that determines consumer acceptance of the ingredient applications. Lipid oxidation is the main mechanism for off-flavor development in dried dairy ingredients. The effects of various unit operations on the flavor of dried dairy ingredients have been investigated. Recent research documented that increased surface free fat in spray dried WPC80 was associated with increased lipid oxidation and off-flavors. Surface free fat in spray-dried products is fat on the surface of the powder that is not emulsified. The most common emulsifiers present in dried dairy ingredients are proteins and phospholipids. Currently, only an association between surface free fat and lipid oxidation has been presented. The link between surface free fat in dried dairy ingredients and flavor and flavor stability has not been investigated. In this review, some hypotheses for the role of surface free fat on the flavor of dried dairy ingredients are presented along with proposed mechanisms.

  15. A Comparison of the Effectiveness of Three Group Treatments for Weight Loss

    Science.gov (United States)

    Byom, Tianna K.

    2009-01-01

    Rising overweight and obesity rates in the United States and the accompanying health issues underscore the need for an effective treatment for weight loss. While most people tend to lose weight as a result of cognitive-behavioral treatment, the weight is often regained after treatment ends. Possible reasons for weight regain include not fully…

  16. A Comparison of the Effectiveness of Three Group Treatments for Weight Loss

    Science.gov (United States)

    Byom, Tianna K.

    2009-01-01

    Rising overweight and obesity rates in the United States and the accompanying health issues underscore the need for an effective treatment for weight loss. While most people tend to lose weight as a result of cognitive-behavioral treatment, the weight is often regained after treatment ends. Possible reasons for weight regain include not fully…

  17. Binge Eating and Weight Control: The Role of Experiential Avoidance

    Science.gov (United States)

    Lillis, Jason; Hayes, Steven C.; Levin, Michael E.

    2011-01-01

    Two thirds of the adults in the United States are overweight or obese. Binge eating is a barrier to treatment adherence and sustained weight loss, and can be seen as a form of experiential avoidance. The current study analyzed the impact of binge eating on weight reduction in a previously published study of a 1-day acceptance and commitment…

  18. The effect of spray-drying parameters on the flavor of nonfat dry milk and milk protein concentrate 70.

    Science.gov (United States)

    Park, Curtis W; Stout, Mark A; Drake, MaryAnne

    2016-12-01

    Unit operations during production influence the sensory properties of nonfat dry milk (NFDM) and milk protein concentrate (MPC). Off-flavors in dried dairy ingredients decrease consumer acceptance of ingredient applications. Previous work has shown that spray-drying parameters affect physical and sensory properties of whole milk powder and whey protein concentrate. The objective of this study was to determine the effect of inlet temperature and feed solids concentration on the flavor of NFDM and MPC 70% (MPC70). Condensed skim milk (50% solids) and condensed liquid MPC70 (32% solids) were produced using pilot-scale dairy processing equipment. The condensed products were then spray dried at either 160, 210, or 260°C inlet temperature and 30, 40, or 50% total solids for NFDM and 12, 22, or 32% for MPC70 in a randomized order. The entire experiment was replicated 3 times. Flavor of the NFDM and MPC70 was evaluated by sensory and instrumental volatile compound analyses. Surface free fat, particle size, and furosine were also analyzed. Both main effects (30, 40, and 50% solids and 160, 210, and 260°C inlet temperature) and interactions between solids concentration and inlet temperature were investigated. Interactions were not significant. In general, results were consistent for NFDM and MPC70. Increasing inlet temperature and feed solids concentration increased sweet aromatic flavor and decreased cardboard flavor and associated lipid oxidation products. Increases in furosine with increased inlet temperature and solids concentration indicated increased Maillard reactions during drying. Particle size increased and surface free fat decreased with increasing inlet temperature and solids concentration. These results demonstrate that increasing inlet temperatures and solids concentration during spray drying decrease off-flavor intensities in NFDM and MPC70 even though the heat treatment is greater compared with low temperature and low solids. Copyright © 2016 American

  19. Single droplet drying for optimal spray drying of enzymes and probiotics

    NARCIS (Netherlands)

    Schutyser, M.A.I.; Perdana, J.A.; Boom, R.M.

    2012-01-01

    Spray drying is a mild and cost-effective convective drying method. It can be applied to stabilise heat sensitive ingredients, such as enzymes and probiotic bacteria, albeit in industrial practice for example freeze drying or freezing are often preferred. The reason is that optimum drying conditions

  20. Dry Transfer Systems for Used Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Brett W. Carlsen; Michaele BradyRaap

    2012-05-01

    The potential need for a dry transfer system (DTS) to enable retrieval of used nuclear fuel (UNF) for inspection or repackaging will increase as the duration and quantity of fuel in dry storage increases. This report explores the uses for a DTS, identifies associated general functional requirements, and reviews existing and proposed systems that currently perform dry fuel transfers. The focus of this paper is on the need for a DTS to enable transfer of bare fuel assemblies. Dry transfer systems for UNF canisters are currently available and in use for transferring loaded canisters between the drying station and storage and transportation casks.

  1. Evaluation of dry feeding and liquid feeding to lactating sows under high temperature environment.

    Science.gov (United States)

    Hong, J S; Jin, S S; Jung, S W; Fang, L H; Kim, Y Y

    2016-01-01

    Liquid feeding system has been introduced to domestic swine farms, but negative cognition about liquid feeding system has been remained for feed waste decay related with poor management and microbial contamination. For these reasons, this study was conducted to evaluate the effects of feeding method in lactating sows. A total of 30 mixed-parity (average 4.13) lactating sows (Yorkshire × Landrace) with an initial BW of 218.8 ± 19.5kg was used in a 3 week trial. Sows were allotted to 1 of 2 treatments in a completely randomized design by their body weight, backfat thickness, parity and alive litter weight. One of treatments was dry feeding and the other was liquid feeding (water to feed ratio, 1:1). Experimental diets contained 3265 kcal ME/kg, 12.6 % CP, 5.76 % EE, 1.09 % total lysine, 0.25 % total methionine, as fed basis. Dry feeding treatment had high body weight loss rather than liquid feeding treatment (P = 0.04). Dry feeding treatment had tendency to increase litter weight at 21d of lactation (P = 0.06) and litter weight gain (P = 0.04) during lactation period (0-3 week). Sows fed dry feeding method made milk containing high content of casein and total solid rather than sows fed liquid feeding method (P = 0.04). In addition, dry feeding treatment had tendency to higher content of milk fat, protein and solid not fat on 21d of lactation (P = 0.07). Sows fed dry feeding type also showed higher milk energy content in milk of 21d lactation (P = 0.05). Furthermore, liquid feeding treatment showed high occurrence in feed waste during lactation period (P sows under high temperature environment like lactating barn.

  2. Intracellular water exchange for measuring the dry mass, water mass and changes in chemical composition of living cells.

    Directory of Open Access Journals (Sweden)

    Francisco Feijó Delgado

    Full Text Available We present a method for direct non-optical quantification of dry mass, dry density and water mass of single living cells in suspension. Dry mass and dry density are obtained simultaneously by measuring a cell's buoyant mass sequentially in an H2O-based fluid and a D2O-based fluid. Rapid exchange of intracellular H2O for D2O renders the cell's water content neutrally buoyant in both measurements, and thus the paired measurements yield the mass and density of the cell's dry material alone. Utilizing this same property of rapid water exchange, we also demonstrate the quantification of intracellular water mass. In a population of E. coli, we paired these measurements to estimate the percent dry weight by mass and volume. We then focused on cellular dry density - the average density of all cellular biomolecules, weighted by their relative abundances. Given that densities vary across biomolecule types (RNA, DNA, protein, we investigated whether we could detect changes in biomolecular composition in bacteria, fungi, and mammalian cells. In E. coli, and S. cerevisiae, dry density increases from stationary to exponential phase, consistent with previously known increases in the RNA/protein ratio from up-regulated ribosome production. For mammalian cells, changes in growth conditions cause substantial shifts in dry density, suggesting concurrent changes in the protein, nucleic acid and lipid content of the cell.

  3. Effect of drying conditions on the physical properties of impregnated orange peel

    Directory of Open Access Journals (Sweden)

    K. Manjarres-Pinzon

    2013-09-01

    Full Text Available Orange peel represents approximately 30-40 g/100g of the fresh fruit weight and could be used to develop value-added products. Hence, this study aims to evaluate the effects of drying conditions on the physical properties of orange peel impregnated with sucrose solution. The response surface method (RSM was used to optimize two parameters: drying temperature (35-55 ºC and air flow rate (2-3 m/s. The measured responses used to determine the effect of dying process conditions were: moisture content. drying time. total soluble solids. color and hardness. The dried orange peels from the optimal process were subjected to a sensory test by 60 consumers. The optimum conditions for the drying of orange peels were determined to obtain minimum hardness, moisture content and drying time for a w values below 0.6. The optimum conditions were found to be a dying temperature of 52.3 ºC and air flow rate of 2.0 m/s. At this point, drying time, hardness and moisture content were found to be 20 h, 78.4 N and 7.6%, respectively. The sensory results showed that consumers aged over 30 years old accepted well the dried orange peel.

  4. Mathematical modeling and simulation of gel drying with supercritical carbon dioxide

    Directory of Open Access Journals (Sweden)

    ALEKSANDAR ORLOVIC

    2005-02-01

    Full Text Available Mathematical models of alumina/silica gel supercritical drying with carbon dioxide were studied using supercritical drying experimental data. An alumina/silica gel with zinc chloride was synthesized and dried with superciritical carbon dioxide, and its weight change wasmonitored as a function of drying time. The pore size distribution of the obtained aerogel was determined using the BET method and nitrogen adsorption/desorption. Themathematical model of the supercritical drying of the wet gel was represented as unsteady and one-dimensional diffusion of solvent through the aerogel pores filled with supercitical carbon dioxide. Parallel pore model and pores in series model were developed on the basis of the measured porous structure of the aerogel. It was found that these models which use different effective diffusivity value for each pore size were in much better agreement with the experimental data than models which use an overall effective diffusivity. The local effective diffusivity coefficients were calculated using different tortuosity values for each pore size, and they were distributed according to the pore size distribution data. Model simulations of the superciritical drying with carbon dioxide confirmed that the drying temperature and gel particle diameter have a significant influence on the drying time.

  5. Light weight phosphate cements

    Science.gov (United States)

    Wagh, Arun S.; Natarajan, Ramkumar,; Kahn, David

    2010-03-09

    A sealant having a specific gravity in the range of from about 0.7 to about 1.6 for heavy oil and/or coal bed methane fields is disclosed. The sealant has a binder including an oxide or hydroxide of Al or of Fe and a phosphoric acid solution. The binder may have MgO or an oxide of Fe and/or an acid phosphate. The binder is present from about 20 to about 50% by weight of the sealant with a lightweight additive present in the range of from about 1 to about 10% by weight of said sealant, a filler, and water sufficient to provide chemically bound water present in the range of from about 9 to about 36% by weight of the sealant when set. A porous ceramic is also disclosed.

  6. Family Weight School treatment

    DEFF Research Database (Denmark)

    Nowicka, Paulina; Höglund, Peter; Pietrobelli, Angelo

    2008-01-01

    OBJECTIVE: The aim was to evaluate the efficacy of a Family Weight School treatment based on family therapy in group meetings with adolescents with a high degree of obesity. METHODS: Seventy-two obese adolescents aged 12-19 years old were referred to a childhood obesity center by pediatricians...... and school nurses and offered a Family Weight School therapy program in group meetings given by a multidisciplinary team. Intervention was compared with an untreated waiting list control group. Body mass index (BMI) and BMI z-scores were calculated before and after intervention. RESULTS: Ninety percent...... group with initial BMI z-score 3.5. CONCLUSIONS: Family Weight School treatment model might be suitable for adolescents with BMI z...

  7. Weight Management in Phenylketonuria

    DEFF Research Database (Denmark)

    Rocha, Julio César; van Rijn, Margreet; van Dam, Esther

    2016-01-01

    specialized clinic, the second objective is important in establishing an understanding of the breadth of overweight and obesity in PKU in Europe. KEY MESSAGES: In PKU, the importance of adopting a European nutritional management strategy on weight management is highlighted in order to optimize long-term....... It is becoming evident that in addition to acceptable blood phenylalanine control, metabolic dieticians should regard weight management as part of routine clinical practice. SUMMARY: It is important for practitioners to differentiate the 3 levels for overweight interpretation: anthropometry, body composition...... and frequency and severity of associated metabolic comorbidities. The main objectives of this review are to suggest proposals for the minimal standard and gold standard for the assessment of weight management in PKU. While the former aims to underline the importance of nutritional status evaluation in every...

  8. Impregnation of leather during "freeze-drying"

    DEFF Research Database (Denmark)

    Storch, Mikkel; Vestergaard Poulsen Sommer, Dorte; Hovmand, Ida

    2016-01-01

    Freeze-drying is a recognized method for the preservation of waterlogged objects. Naturally, freeze-drying has also been used for waterlogged archaeological leather often after treatment with Na2.EDTA and impregnation with PEG; but the treated leather sometimes suffers from “excessive drying......” becoming too stiff and brittle. The aim of this study was to examine the effect of a conventional freeze-drying method against an alternative freeze-drying method that preserves the natural moisture content of the leather. Both new and archaeological waterlogged leather were included in the study...... suggest that the process which takes place within the leather during the freeze-drying in not actual freeze-drying, but rather a sophisticated way of distributing the impregnating agent. The pure ice phase freezes out, but the impregnating agent remains liquid as the temperature does not become low enough...

  9. Characteristic Drying Curve of Oil Palm Fibers

    Directory of Open Access Journals (Sweden)

    Ifa Puspasari

    2014-03-01

    Full Text Available The drying of crushed oil palm fronds was studied in a fluidized bed dryer assisted with mechanical agitation at different inlet air temperature, superficial air velocity, bed loading and agitation speed. The drying kinetics of the fibers under various drying conditions could be described by a single characteristic drying curve. A combined exponential and power law model is proposed to represent the characteristic drying curve which described both the increasing rate and the falling rate periods. The proposed model is also tested for drying kinetics of oil palm empty fruit bunch from previous researcher. It was found that the characteristic curve for both oil palm fronds and empty fruit bunch fibers has similar shape and that the proposed model is acceptable for describing the complete drying characteristics of the fibers.

  10. Dry spell frequency in West Java, Indonesia

    Science.gov (United States)

    Purnaningtyas, V. I.; Boer, R.; Faqih, A.

    2017-03-01

    The climatology and variability of dry spells are valuable information for scientists, engineers, planners, and managers working in water-related sectors such as agriculture, ecology, hydrology, and water resources. The dry spell concerns consecutive dry days which are the largest number of consecutive days with less than 1 mm of daily precipitation within a year. The objective of this study is to analyse the spatial and temporal characteristics of dry spells and also specifically investigate the frequency patterns of the dry spell distribution based on historical observed daily precipitation from 1981 to 2010. The longest dry spell occured at Pasirukem with the length of 252 days. The northern coast of West Java have higher probabilities of dry spells more than 5, 10, 15, and 20 days.

  11. Acousto-Convective Drying of Pine Nuts

    Science.gov (United States)

    Zhilin, A. A.; Fedorov, A. V.

    2014-07-01

    An experimental investigation of the process of drying pine nut grains has been carried out by three methods: acousto-convective, thermoconvective, and thermal. A qualitative and a quantitative comparison of the dynamics of the processes of moisture extraction from the nut grains for the considered drying methods have been made. To elucidate the mechanism of moisture extraction from the pine nut grains, we carried out a separate investigation of the process of drying the nut shell and the kernel. The obtained experimental data on the acousto-convective drying of nuts are well described by the relaxation model, the data on the thermoconvective drying are well described by the bilinear law, and the data on the thermal drying are well described by the combined method consisting of three time steps characterized by different kinetic regimes of drying.

  12. Solar energy dryer kinetics using flat-plate finned collector and forced convection for potato drying

    Science.gov (United States)

    Batubara, Fatimah; Misran, Erni; Dina, Sari Farah; Heppy

    2017-06-01

    Research on potato drying using the indirect solar dryer with flat-plate finned collector and forced convection has been done. The research was conducted at the outdoor field of Laboratory of Institute for Research and Standardization of Industry on June 14th-23rd, 2016 from 9:00 am to 4:00 pm. This research aims to obtain the drying kinetics model of potato (Solanumtuberosum L.) using an indirect solar dryer's (ISD) with flat plate-finned collector and forced convection. The result will be compared to the open sun drying (OSD) method. Weather conditions during the drying process took place as follows; surrounding air temperature was in the range 27 to 34.7 °C, relative humidity (RH) 29.5 to 61.0% and the intensity of solar radiation 105.6 to 863.1 Watt/m2. The dried potato thicknesses were 1.0 cm, 1.5 cm and 2.0 cm, with the average initial water content of 76.46%. The average temperature in the collector chamber ranged from 42.2 to 57.4 °C and the drying chamber was at 46.2 °C. The best drying result was obtained from a sample size of 1 cm thickness using the IDS method with an average drying rate of 0.018 kg H2O per kg dry-weight.hour and the water content was constant at 5.02% in 21 hours of drying time. The most suitable kinetics model is Page model, equation MR = exp (-0.049 t1,336) for 1.0 cm thickness, exp (-0.066 t1,222) for 1.5 cm thickness and exp (-0.049 t1,221) for 2.0 cm thickness. The quality of potato drying using ISD method is better than using OSD which can be seen from the color produced.

  13. A Model-Based Methodology for Spray-Drying Process Development

    OpenAIRE

    Dobry, Dan E.; Settell, Dana M.; Baumann, John M.; Ray, Rod J.; Graham, Lisa J; Beyerinck, Ron A.

    2009-01-01

    Solid amorphous dispersions are frequently used to improve the solubility and, thus, the bioavailability of poorly soluble active pharmaceutical ingredients (APIs). Spray-drying, a well-characterized pharmaceutical unit operation, is ideally suited to producing solid amorphous dispersions due to its rapid drying kinetics. This paper describes a novel flowchart methodology based on fundamental engineering models and state-of-the-art process characterization techniques that ensure that spray-dr...

  14. Dairy cow disability weights.

    Science.gov (United States)

    McConnel, Craig S; McNeil, Ashleigh A; Hadrich, Joleen C; Lombard, Jason E; Garry, Franklyn B; Heller, Jane

    2017-08-01

    Over the past 175 years, data related to human disease and death have progressed to a summary measure of population health, the Disability-Adjusted Life Year (DALY). As dairies have intensified there has been no equivalent measure of the impact of disease on the productive life and well-being of animals. The development of a disease-adjusted metric requires a consistent set of disability weights that reflect the relative severity of important diseases. The objective of this study was to use an international survey of dairy authorities to derive disability weights for primary disease categories recorded on dairies. National and international dairy health and management authorities were contacted through professional organizations, dairy industry publications and conferences, and industry contacts. Estimates of minimum, most likely, and maximum disability weights were derived for 12 common dairy cow diseases. Survey participants were asked to estimate the impact of each disease on overall health and milk production. Diseases were classified from 1 (minimal adverse effects) to 10 (death). The data was modelled using BetaPERT distributions to demonstrate the variation in these dynamic disease processes, and to identify the most likely aggregated disability weights for each disease classification. A single disability weight was assigned to each disease using the average of the combined medians for the minimum, most likely, and maximum severity scores. A total of 96 respondents provided estimates of disability weights. The final disability weight values resulted in the following order from least to most severe: retained placenta, diarrhea, ketosis, metritis, mastitis, milk fever, lame (hoof only), calving trauma, left displaced abomasum, pneumonia, musculoskeletal injury (leg, hip, back), and right displaced abomasum. The peaks of the probability density functions indicated that for certain disease states such as retained placenta there was a relatively narrow range of

  15. Exercise in weight management.

    Science.gov (United States)

    Pinto, B M; Szymanski, L

    1997-11-01

    Exercise is integral to successful weight loss and maintenance. When talking to patients about exercise, consider their readiness, and address the barriers that prevent exercise. Physicians can help those patients who already exercise by encouraging them to continue and helping them anticipate, and recover from, lapses. Providing resource material to patients on behavioral strategies for exercise adoption and weight management can supplement the physician's efforts. Overall, patients need to hear that any regular exercise, be it step-aerobics, walking, or taking the stairs, will benefit them.

  16. Dry etching technology for semiconductors

    CERN Document Server

    Nojiri, Kazuo

    2015-01-01

    This book is a must-have reference to dry etching technology for semiconductors, which will enable engineers to develop new etching processes for further miniaturization and integration of semiconductor integrated circuits.  The author describes the device manufacturing flow, and explains in which part of the flow dry etching is actually used. The content is designed as a practical guide for engineers working at chip makers, equipment suppliers and materials suppliers, and university students studying plasma, focusing on the topics they need most, such as detailed etching processes for each material (Si, SiO2, Metal etc) used in semiconductor devices, etching equipment used in manufacturing fabs, explanation of why a particular plasma source and gas chemistry are used for the etching of each material, and how to develop etching processes.  The latest, key technologies are also described, such as 3D IC Etching, Dual Damascene Etching, Low-k Etching, Hi-k/Metal Gate Etching, FinFET Etching, Double Patterning ...

  17. Positioning of Weight Bias: Moving towards Social Justice

    Science.gov (United States)

    Alberga, Angela S.; Kassan, Anusha; Sesma-Vazquez, Monica

    2016-01-01

    Weight bias is a form of stigma with detrimental effects on the health and wellness of individuals with large bodies. Researchers from various disciplines have recognized weight bias as an important topic for public health and for professional practice. To date, researchers from various areas have approached weight bias from independent perspectives and from differing theoretical orientations. In this paper, we examined the similarities and differences between three perspectives (i.e., weight-centric, non-weight-centric (health-centric), and health at every size) used to understand weight bias and approach weight bias research with regard to (a) language about people with large bodies, (b) theoretical position, (c) identified consequences of weight bias, and (d) identified influences on weight-based social inequity. We suggest that, despite differences, each perspective acknowledges the negative influences that position weight as being within individual control and the negative consequences of weight bias. We call for recognition and discussion of weight bias as a social justice issue in order to change the discourse and professional practices extended towards individuals with large bodies. We advocate for an emphasis on social justice as a uniting framework for interdisciplinary research on weight bias.

  18. Positioning of Weight Bias: Moving towards Social Justice

    Directory of Open Access Journals (Sweden)

    Sarah Nutter

    2016-01-01

    Full Text Available Weight bias is a form of stigma with detrimental effects on the health and wellness of individuals with large bodies. Researchers from various disciplines have recognized weight bias as an important topic for public health and for professional practice. To date, researchers from various areas have approached weight bias from independent perspectives and from differing theoretical orientations. In this paper, we examined the similarities and differences between three perspectives (i.e., weight-centric, non-weight-centric (health-centric, and health at every size used to understand weight bias and approach weight bias research with regard to (a language about people with large bodies, (b theoretical position, (c identified consequences of weight bias, and (d identified influences on weight-based social inequity. We suggest that, despite differences, each perspective acknowledges the negative influences that position weight as being within individual control and the negative consequences of weight bias. We call for recognition and discussion of weight bias as a social justice issue in order to change the discourse and professional practices extended towards individuals with large bodies. We advocate for an emphasis on social justice as a uniting framework for interdisciplinary research on weight bias.

  19. Drying of a plasmid containing formulation: chitosan as a protecting agent

    Directory of Open Access Journals (Sweden)

    Mohajel Nasir

    2012-09-01

    Full Text Available Abstract Background The purpose of the study. Along with research on development of more efficient gene delivery systems, it is necessary to search on stabilization processes to extend their active life span. Chitosan is a nontoxic, biocompatible and available gene delivery carrier. The aim of this study was to assess the ability of this polymer to preserve transfection efficiency during spray-drying and a modified freeze-drying process in the presence of commonly used excipients. Method Molecular weight of chitosan was reduced by a chemical reaction and achieved low molecular weight chitosan (LMWC was complexed with pDNA. Obtained nanocomplex suspensions were diluted by solutions of lactose and leucine, and these formulations were spray dried or freeze dried using a modified technique. Size, polydispersity index, zeta potential, intensity of supercoiled DNA band on gel electrophoresis, and transfection efficiency of reconstituted nanocomplexes were compared with freshly prepared ones. Results and major conclusion Size distribution profiles of both freeze dried, and 13 out of 16 spray-dried nanocomplexes remained identical to freshly prepared ones. LMWC protected up to 100% of supercoiled structure of pDNA in both processes, although DNA degradation was higher in spray-drying of the nanocomplexes prepared with low N/P ratios. Both techniques preserved transfection efficiency similarly even in lower N/P ratios, where supercoiled DNA content of spray dried formulations was lower than freeze-dried ones. Leucine did not show a significant effect on properties of the processed nanocomplexes. It can be concluded that LMWC can protect DNA structure and transfection efficiency in both processes even in the presence of leucine.

  20. Weight and Diabetes (For Parents)

    Science.gov (United States)

    ... help all kids maintain a healthy weight. For kids with diabetes, diet and exercise are even more important because ... weight is good for the entire family! When kids with diabetes reach and maintain a healthy weight, they feel ...