WorldWideScience

Sample records for unit cell dimensions

  1. Semiempirical and DFT computations of the influence of Tb(III) dopant on unit cell dimensions of cerium(III) fluoride.

    Science.gov (United States)

    Shyichuk, Andrii; Runowski, Marcin; Lis, Stefan; Kaczkowski, Jakub; Jezierski, Andrzej

    2015-01-30

    Several computational methods, both semiempirical and ab initio, were used to study the influence of the amount of dopant on crystal cell dimensions of CeF3 doped with Tb(3+) ions (CeF3 :Tb(3+) ). AM1, RM1, PM3, PM6, and PM7 semiempirical parameterization models were used, while the Sparkle model was used to represent the lanthanide cations in all cases. Ab initio calculations were performed by means of GGA+U/PBE projector augmented wave density functional theory. The computational results agree well with the experimental data. According to both computation and experiment, the crystal cell parameters undergo a linear decrease with increasing amount of the dopant. The computations performed using Sparkle/PM3 and DFT methods resulted in the best agreement with the experiment with the average deviation of about 1% in both cases. Typical Sparkle/PM3 computation on a 2×2×2 supercell of CeF3:Tb3+ lasted about two orders of magnitude shorter than the DFT computation concerning a unit cell of this material. © 2014 Wiley Periodicals, Inc.

  2. Tumor cells diagnostic through fractal dimensions

    International Nuclear Information System (INIS)

    Timbo, Christiano dos Santos

    2004-01-01

    This method relies on the application of an algorithm for the quantitative and statistic differentiation of a sample of cells stricken by a certain kind of pathology and a sample of healthy cells. This differentiation is made by applying the principles of fractal dimension to digital images of the cells. The algorithm was developed using the the concepts of Object- Oriented Programming, resulting in a simple code, divided in 5 distinct procedures, and a user-friendly interface. To obtain the fractal dimension of the images of the cells, the program processes the image, extracting its border, and uses it to characterize the complexity of the form of the cell in a quantitative way. In order to validate the code, it was used a digitalized image found in an article by W. Bauer, developer of an analog method. The result showed a difference of 6% between the value obtained by Bauer and the value obtained the algorithm developed in this work. (author)

  3. Conceptual Model of Quantities, Units, Dimensions, and Values

    Science.gov (United States)

    Rouquette, Nicolas F.; DeKoenig, Hans-Peter; Burkhart, Roger; Espinoza, Huascar

    2011-01-01

    JPL collaborated with experts from industry and other organizations to develop a conceptual model of quantities, units, dimensions, and values based on the current work of the ISO 80000 committee revising the International System of Units & Quantities based on the International Vocabulary of Metrology (VIM). By providing support for ISO 80000 in SysML via the International Vocabulary of Metrology (VIM), this conceptual model provides, for the first time, a standard-based approach for addressing issues of unit coherence and dimensional analysis into the practice of systems engineering with SysML-based tools. This conceptual model provides support for two kinds of analyses specified in the International Vocabulary of Metrology (VIM): coherence of units as well as of systems of units, and dimension analysis of systems of quantities. To provide a solid and stable foundation, the model for defining quantities, units, dimensions, and values in SysML is explicitly based on the concepts defined in VIM. At the same time, the model library is designed in such a way that extensions to the ISQ (International System of Quantities) and SI Units (Systeme International d Unites) can be represented, as well as any alternative systems of quantities and units. The model library can be used to support SysML user models in various ways. A simple approach is to define and document libraries of reusable systems of units and quantities for reuse across multiple projects, and to link units and quantity kinds from these libraries to Unit and QuantityKind stereotypes defined in SysML user models.

  4. Grandeurs, dimensions, et conversions d'unités Quantities, Dimensions and Units Conversions

    Directory of Open Access Journals (Sweden)

    Bronner C.

    2006-11-01

    Full Text Available Il n'est plus besoin de démontrer que le Système International d'Unités (SI est un fait. Il est normalement enseigné dans les lycées et universités. Les scientifiques l'utilisent systématiquement dans leurs publications; les nouveaux livres et banques de données s'en servent couramment. Cependant, certaines industries (la pétrolière entre autres continuent à se servir de systèmes techniques. On trouve dans des archives de vieilles données ou des spécifications d'usines qui ont été faites dans d'autres systèmes. Il n'est pas rare, dans la vie professionnelle, de rencontrer un problème où une unité doit être transformée. Cet article souhaite aider les personnes qui doivent résoudre ce genre d'écueil en leur présentant une vision globale des différents systèmes d'unités qui ont historiquement existé. Une définition des unités, soit traditionnelles, soit étranges, accompagne également l'article. L'aide la plus importante sera sans doute trouvée dans le programme inclus dans une disquette. Un logiciel complet, sous Windows, permettra à quiconque de résoudre, sans erreur, son problème de conversion d'unité. La technique de conversion, basée sur l'utilisation du calcul dimensionnel, et utilisée dans le programme, est également expliquée. It is not longer necessary to prove that the International System of Units (SI is a fact. It is normally used in schools and universities. Scientists systematically use SI in their publications. New books and databases are commonly built on it. Meanwhile, some industries (oil companies among others keep on using technical systems. It is possible to find old data and plant designs that use other systems. It is not uncommon, in professional life, to find a problem in which units need to be transformed. This article aims to help people who have to solve this kind of difficulty, by giving an overview of the different unit systems. A description of traditional and unusual units is

  5. Light-dependent governance of cell shape dimensions in cyanobacteria

    Directory of Open Access Journals (Sweden)

    Beronda L Montgomery

    2015-05-01

    Full Text Available The regulation of cellular dimension is important for the function and survival of cells. Cellular dimensions, such as size and shape, are regulated throughout the life cycle of bacteria and can be adapted in response to environmental changes to fine-tune cellular fitness. Cell size and shape are generally coordinated with cell growth and division. Cytoskeletal regulation of cell shape and cell wall biosynthesis and/or deposition occurs in a range of organisms. Photosynthetic organisms, such as cyanobacteria, particularly exhibit light-dependent regulation of morphogenes and generation of reactive oxygen species and other signals that can impact cellular dimensions. Environmental signals initiate adjustments of cellular dimensions, which may be vitally important for optimizing resource acquisition and utilization or for coupling the cellular dimensions with the regulation of subcellular organization to maintain optimal metabolism. Although the involvement of cytoskeletal components in the regulation of cell shape is widely accepted, the signaling factors that regulate cytoskeletal and other distinct components involved in cell shape control, particularly in response to changes in external light cues, remain to be fully elucidated. In this review, factors impacting the inter-coordination of growth and division, the relationship between the regulation of cellular dimensions and central carbon metabolism, and consideration of the effects of specific environment signals, primarily light, on cell dimensions in cyanobacteria will be discussed. Current knowledge about the molecular bases of the light-dependent regulation of cellular dimensions and cell shape in cyanobacteria will be highlighted.

  6. Precise Dimensions; A history of units from 1791-2018

    Science.gov (United States)

    Cooper, Malcolm; Grozier, Jim

    2017-11-01

    Units are the foundation for all measurement of the natural world, and from which standard, our understanding develops. This book, stemming from a conference on the history of units organised by the editors, provides a detailed and discursive examination of the history of units within physics, in advance of the proposed redefinition of the SI base units at the General Conference on Weights and Measures in 2018. It features contributions from leading researchers in metrology and history.

  7. Fundamental Dimensions and Essential Elements of Exemplary Local Extension Units

    Science.gov (United States)

    Terry, Bryan D.; Osborne, Edward

    2015-01-01

    Collaborative efforts between federal, state, and local government agencies enable local Extension units to deliver a high level of educational opportunities to local citizens. These units represent land-grant institutions by delivering non-formal education that aim to address local, regional, and state concerns. The purpose of this study was to…

  8. On the analytical evaluation of the partition function for unit hypercubes in four dimensions

    International Nuclear Information System (INIS)

    Hari Dass, N.D.

    1984-10-01

    The group integrations required for the analytic evaluation of the partition function for unit hypercubes in four dimensions are carried out. Modifications of the graphical rules for SU 2 group integrations cited in the literature are developed for this purpose. A complete classification of all surfaces that can be embedded in the unit hypercube is given and their individual contribution to the partition function worked out. Applications are discussed briefly. (orig.)

  9. Phenotypic Dimensions of Spirituality: Implications for Mental Health in China, India, and the United States.

    Science.gov (United States)

    McClintock, Clayton H; Lau, Elsa; Miller, Lisa

    2016-01-01

    While the field of empirical study on religion and spirituality in relation to mental health has rapidly expanded over the past decade, little is known about underlying dimensions of spirituality cross-culturally conceived. We aimed to bridge this gap by inductively deriving potential universal dimensions of spirituality through a large-scale, multi-national data collection, and examining the relationships of these dimensions with common psychiatric conditions. Five-thousand five-hundred and twelve participants from China, India, and the United States completed a two-hour online survey consisting of wide-ranging measures of the lived experience of spirituality, as well as clinical assessments. A series of inductive Exploratory Factor Analysis (EFA) and cross-validating Exploratory Structural Equation Modeling (ESEM) were conducted to derive common underlying dimensions of spirituality. Logistic regression analyses were then conducted with each dimension to predict depression, suicidal ideation, generalized anxiety, and substance-related disorders. Preliminary EFA results were consistently supported by ESEM findings. Analyses of 40 spirituality measures revealed five invariant factors across countries which were interpreted as five dimensions of universal spiritual experience, specifically: love, in the fabric of relationships and as a sacred reality; unifying interconnectedness, as a sense of energetic oneness with other beings in the universe; altruism, as a commitment beyond the self with care and service; contemplative practice, such as meditation, prayer, yoga, or qigong; and religious and spiritual reflection and commitment, as a life well-examined. Love, interconnectedness, and altruism were associated with less risk of psychopathology for all countries. Religious and spiritual reflection and commitment and contemplative practice were associated with less risk in India and the United States but associated with greater risk in China. Education was directly

  10. Phenotypic Dimensions of Spirituality: Implications for Mental Health in China, India, and the United States

    Directory of Open Access Journals (Sweden)

    Clayton Hoi-Yun McClintock

    2016-10-01

    Full Text Available While the field of empirical study on religion and spirituality in relation to mental health has rapidly expanded over the past decade, little is known about underlying dimensions of spirituality cross-culturally conceived. We aimed to bridge this gap by inductively deriving potential universal dimensions of spirituality through a large-scale, multi-national data collection and examining the relationships of these dimensions with common psychiatric conditions. Five-thousand five-hundred twelve participants from China, India, and the United States completed a two-hour online survey consisting of wide-ranging measures of the lived experience of spirituality, as well as clinical assessments. A series of inductive Exploratory Factor Analysis (EFA and cross-validating Exploratory Structural Equation Modeling (ESEM were conducted to derive common underlying dimensions of spirituality. Logistic regression analyses were then conducted with each dimension to predict depression, suicidal ideation, generalized anxiety, and substance-related disorders. Preliminary EFA results were consistently supported by ESEM findings. Analyses of forty spirituality measures revealed five invariant factors across countries which were interpreted as five dimensions of universal spiritual experience, specifically: love, in the fabric of relationships and as a sacred reality; unifying interconnectedness, as a sense of energetic oneness with other beings in the universe; altruism, as a commitment beyond the self with care and service; contemplative practice, such as meditation, prayer, yoga, or qigong; and religious and spiritual reflection and commitment, as a life well-examined. Love, interconnectedness, and altruism were associated with less risk of psychopathology for all countries. Religious and spiritual reflection and commitment and contemplative practice were associated with less risk in India and the United States but associated with greater risk in China. Education

  11. Frequency distribution of the reduced unit cells of centred lattices from the Protein Data Bank.

    Science.gov (United States)

    Swaminathan, Kunchithapadam

    2012-03-01

    In crystallography, a centred conventional lattice unit cell has its corresponding reduced primitive unit cell. This study presents the frequency distribution of the reduced unit cells of all centred lattice entries of the Protein Data Bank (as of 23 August 2011) in four unit-cell-dimension-based groups and seven interaxial-angle-based subgroups. This frequency distribution is an added layer of support during space-group assignment in new crystals. In addition, some interesting patterns of distribution are discussed as well as how some reduced unit cells could be wrongly accepted as primitive lattices in a different crystal system.

  12. Unusually large unit cell of lipid bicontinuous cubic phase: towards nature's length scales

    Science.gov (United States)

    Kim, Hojun; Leal, Cecilia

    Lipid bicontinuous cubic phases are of great interest for drug delivery, protein crystallization, biosensing, and templates for directing hard material assembly. Structural modulations of lipid mesophases regarding phase identity and unit cell size are often necessary to augment loading and gain pore size control. One important example is the need for unit cells large enough to guide the crystallization of bigger proteins without distortion of the templating phase. In nature, bicontinuous cubic constructs achieve unit cell dimensions as high as 300 nm. However, the largest unit cell of lipid mesophases synthesized in the lab is an order of magnitude lower. In fact, it has been predicted theoretically that lipid bicontinuous cubic phases of unit cell dimensions exceeding 30 nm could not exist, as high membrane fluctuations would damp liquid crystalline order. Here we report non-equilibrium assembly methods of synthesizing metastable bicontinuous cubic phases with unit cell dimensions as high as 70 nm. The phases are stable for very long periods and become increasingly ordered as time goes by without changes to unit cell dimensions. We acknowledge the funding source as a NIH.

  13. Phase transitions in tumor growth: IV relationship between metabolic rate and fractal dimension of human tumor cells

    Science.gov (United States)

    Betancourt-Mar, J. A.; Llanos-Pérez, J. A.; Cocho, G.; Mansilla, R.; Martin, R. R.; Montero, S.; Nieto-Villar, J. M.

    2017-05-01

    By the use of thermodynamics formalism of irreversible processes, complex systems theory and systems biology, it is derived a relationship between the production of entropy per unit time, the fractal dimension and the tumor growth rate for human tumors cells. The thermodynamics framework developed demonstrates that, the dissipation function is a Landau potential and also the Lyapunov function of the dynamical behavior of tumor growth, which indicate the directional character, stability and robustness of the phenomenon. The entropy production rate may be used as a quantitative index of the metastatic potential of tumors. The current theoretical framework will hopefully provide a better understanding of cancer and contribute to improvements in cancer treatment.

  14. Lithium-Ion Cell Charge Control Unit

    Science.gov (United States)

    Reid, Concha; Button, Robert; Manzo, Michelle; McKissock, Barbara; Miller, Thomas; Gemeiner, Russel; Bennett, William; Hand, Evan

    2006-01-01

    Life-test data of Lithium-Ion battery cells is critical in order to establish their performance capabilities for NASA missions and Exploration goals. Lithium-ion cells have the potential to replace rechargeable alkaline cells in aerospace applications, but they require a more complex charging scheme than is typically required for alkaline cells. To address these requirements in our Lithium-Ion Cell Test Verification Program, a Lithium-Ion Cell Charge Control Unit was developed by NASA Glenn Research Center (GRC). This unit gives researchers the ability to test cells together as a pack, while allowing each cell to charge individually. This allows the inherent cell-to-cell variations to be addressed on a series string of cells and results in a substantial reduction in test costs as compared to individual cell testing. The Naval Surface Warfare Center at Crane, Indiana developed a power reduction scheme that works in conjunction with the Lithium-Ion Cell Charge Control Unit. This scheme minimizes the power dissipation required by the circuitry to prolong circuit life and improve its reliability.

  15. Tumor cells diagnostic through fractal dimensions; Diagnostico de celulas tumorais atraves de dimensoes fractais

    Energy Technology Data Exchange (ETDEWEB)

    Timbo, Christiano dos Santos

    2004-07-01

    This method relies on the application of an algorithm for the quantitative and statistic differentiation of a sample of cells stricken by a certain kind of pathology and a sample of healthy cells. This differentiation is made by applying the principles of fractal dimension to digital images of the cells. The algorithm was developed using the the concepts of Object- Oriented Programming, resulting in a simple code, divided in 5 distinct procedures, and a user-friendly interface. To obtain the fractal dimension of the images of the cells, the program processes the image, extracting its border, and uses it to characterize the complexity of the form of the cell in a quantitative way. In order to validate the code, it was used a digitalized image found in an article by W. Bauer, developer of an analog method. The result showed a difference of 6% between the value obtained by Bauer and the value obtained the algorithm developed in this work. (author)

  16. Evaluation of an innovative radiographic technique - parallel profile radiography - to determine the dimensions of dentogingival unit

    Directory of Open Access Journals (Sweden)

    Sushama R Galgali

    2011-01-01

    Full Text Available Background: Maintenance of gingival health is a key factor for longevity of the teeth as well as of restorations. The physiologic dentogingival unit (DGU, which is composed of the epithelial and connective tissue attachments of the gingiva, functions as a barrier against microbial entry into the periodontium. Invasion of this space triggers inflammation and causes periodontal destruction. Despite the clinical relevance of the determination of the length and width of the DGU, there is no standardized technique. The length of the DGU can be either determined by histologic preparations or by transgingival probing. Although width can also be assessed by transgingival probing or with an ultrasound device, they are either invasive or expensive Aims: This study sought to evaluate an innovative radiographic exploration technique - parallel profile radiography - for measuring the dimensions of the DGU on the labial surfaces of anterior teeth. Materials and Methods: Two radiographs were made using the long-cone parallel technique in ten individuals, one in frontal projection, while the second radiograph was a parallel profile radiograph obtained from a lateral position. The length and width of the DGU was measured using computer software. Transgingival probing (trans-sulcular was done for these same patients and length of the DGU was measured. The values obtained by the two methods were compared. Pearson product correlation coefficient was calculated to examine the agreement between the values obtained by PPRx and transgingival probing. Results: The mean biologic width by the parallel profile radiography (PPRx technique was 1.72 mm (range 0.94-2.11 mm, while the mean thickness of the gingiva was 1.38 mm (range 0.92-1.77 mm. The mean biologic width by trans-gingival probing was 1.6 mm (range 0.8-2.2mm. Pearson product correlation coefficient (r for the above values was 0.914; thus, a high degree of agreement exists between the PPRx and TGP techniques

  17. Tension and Elasticity Contribute to Fibroblast Cell Shape in Three Dimensions.

    Science.gov (United States)

    Brand, Christoph A; Linke, Marco; Weißenbruch, Kai; Richter, Benjamin; Bastmeyer, Martin; Schwarz, Ulrich S

    2017-08-22

    The shape of animal cells is an important regulator for many essential processes such as cell migration or division. It is strongly determined by the organization of the actin cytoskeleton, which is also the main regulator of cell forces. Quantitative analysis of cell shape helps to reveal the physical processes underlying cell shape and forces, but it is notoriously difficult to conduct it in three dimensions. Here we use direct laser writing to create 3D open scaffolds for adhesion of connective tissue cells through well-defined adhesion platforms. Due to actomyosin contractility in the cell contour, characteristic invaginations lined by actin bundles form between adjacent adhesion sites. Using quantitative image processing and mathematical modeling, we demonstrate that the resulting shapes are determined not only by contractility, but also by elastic stress in the peripheral actin bundles. In this way, cells can generate higher forces than through contractility alone. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  18. Three-dimensional single-particle tracking in live cells: news from the third dimension

    International Nuclear Information System (INIS)

    Dupont, A; Wehnekamp, F; Katayama, Y; Lamb, D C; Gorelashvili, M; Schüller, V; Arcizet, D; Heinrich, D

    2013-01-01

    Single-particle tracking (SPT) is of growing importance in the biophysical community. It is used to investigate processes such as drug and gene delivery, viral uptake, intracellular trafficking or membrane-bound protein mobility. Traditionally, SPT is performed in two dimensions (2D) because of its technical simplicity. However, life occurs in three dimensions (3D) and many methods have been recently developed to track particles in 3D. Now, is the third dimension worth the effort? Here we investigate the differences between the 2D and 3D analyses of intracellular transport with the 3D development of a time-resolved mean square displacement (MSD) analysis introduced previously. The 3D trajectories, and the 2D projections, of fluorescent nanoparticles were obtained with an orbital tracking microscope in two different cell types: in Dictyostelium discoideum ameba and in adherent, more flattened HuH-7 human cells. As expected from the different 3D organization of both cells’ cytoskeletons, a third of the active transport was lost upon projection in the ameba whereas the identification of the active phases was barely affected in the HuH-7 cells. In both cell types, we found intracellular diffusion to be anisotropic and the diffusion coefficient values derived from the 2D analysis were therefore biased. (paper)

  19. Dimensions of Sexual Orientation and the Prevalence of Mood and Anxiety Disorders in the United States

    Science.gov (United States)

    Boyd, Carol J.; Hughes, Tonda L.; McCabe, Sean Esteban

    2010-01-01

    Objectives. We used data from a nationally representative sample to examine the associations among 3 dimensions of sexual orientation (identity, attraction, and behavior), lifetime and past-year mood and anxiety disorders, and sex. Methods. We analyzed data from wave 2 of the National Epidemiologic Survey on Alcohol and Related Conditions. Results. Mental health outcomes differed by sex, dimension of sexual orientation, and sexual minority group. Whereas a lesbian, gay, or bisexual identity was associated with higher odds of any mood or anxiety disorder for both men and women, women reporting only same-sex sexual partners in their lifetime had the lowest rates of most disorders. Higher odds of any lifetime mood or anxiety disorder were more consistent and pronounced among sexual minority men than among sexual minority women. Finally, bisexual behavior conferred the highest odds of any mood or anxiety disorder for both males and females. Conclusions. Findings point to mental health disparities among some, but not all, sexual minority groups and emphasize the importance of including multiple measures of sexual orientation in population-based health studies. PMID:19696380

  20. The dimensions of the policy debate over transportation energy: The case of hydrogen in the United States

    International Nuclear Information System (INIS)

    Collantes, Gustavo

    2008-01-01

    Environmental and politico-strategic concerns have driven the increase in policy activity related to energy that the United States witnessed in the last few years. The nature of the issues at stake and the level of stakeholder involvement result in a highly complex policy debate. The broad concern of this paper is the study of this energy-policy process and the identification of the main policy issues. Specifically, multivariate analysis is applied to data on a wide variety of stakeholders' policy beliefs and policy preferences to identify the policy dimensions that characterize the debate over energy policy in the United States. The focus is on the policy debate over hydrogen as a transportation fuel, although many results are applicable to the debate over transportation energy at large. The analysis uses a dataset of 502 individuals from 323 different stakeholder organizations obtained via a web-based survey specifically designed for this study

  1. Device for correction of the spot dimensions and its form in the measuring CRT of the MELAS automatic unit

    International Nuclear Information System (INIS)

    Kachnova, O.A.; Kryutchenko, E.V.; Utochkin, B.A.; Fedotov, V.S.

    1979-01-01

    A digital-to-analog converter is described, designed for dynamic correction of beam focusing of the measuring cathode-ray tube (CRT) of the MELAS automatic device. The described converter consists of two identical units. Every unit generates a voltage proportional to square of deviations along the X and Y axes. Output voltages of both channels are summarized by an analog adder, transformed into current and are fed to the focusing system. The computer circuit used to correct the dimensions of the CRT beam uses microcircuits with low and medium levels of integration and has the following characteristics: the maximum correcting current is 12.4 mA, the direct component of the focusing current is 0.24 A, the correcting current instability is 0.08% and the reduced temperature instability of the total focusing current is 0.004%. The employment of the converter to correct the dimension and shape of the CRT spot makes it possible to reduce the spot diameter to 18 μm at the center of the face and 22 μm at the edges of the face operating field

  2. Sexual Trafficking in the United States: A Domestic Problem with Transnational Dimensions

    Science.gov (United States)

    Hodge, David R.

    2008-01-01

    The trafficking of young women and children for prostitution and other forms of sexual exploitation is one of the most significant human rights abuses in contemporary society. In keeping with the social work profession's commitment to social justice, this article examines the issue of sexual trafficking in the United States. The transnational…

  3. A New Type of Great Power Relationship Between the United States and China: The Military Dimension

    Science.gov (United States)

    2014-09-01

    multipolar world system and a pro- spective security and economic partner of the United States. This stands midway between the panda -hug- ging and dragon...spending, on the other hand, are more difficult to calculate and may prove significantly less easy to bear . 79. Eberhard Sandschneider, “Is China’s

  4. Study of plasma meniscus and beam halo in negative ion sources using three dimension in real space and three dimension in velocity space particle in cell model

    Energy Technology Data Exchange (ETDEWEB)

    Nishioka, S., E-mail: nishioka@ppl.appi.keio.ac.jp; Goto, I.; Hatayama, A. [Graduate School of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522 (Japan); Miyamoto, K. [School of Natural and Living Sciences Education, Naruto University of Education, 748 Nakashima, Takashima, Naruto-cho, Naruto-shi, Tokushima 772-8502 (Japan); Okuda, S.; Fukano, A. [Toshiba, 33 Isogo-chou, Isogo-ku, Yokohama-shi, Kanagawa 235-001 (Japan)

    2014-02-15

    Our previous study by two dimension in real space and three dimension in velocity space-particle in cell model shows that the curvature of the plasma meniscus causes the beam halo in the negative ion sources. The negative ions extracted from the periphery of the meniscus are over-focused in the extractor due to the electrostatic lens effect, and consequently become the beam halo. The purpose of this study is to verify this mechanism with the full 3D model. It is shown that the above mechanism is essentially unchanged even in the 3D model, while the fraction of the beam halo is significantly reduced to 6%. This value reasonably agrees with the experimental result.

  5. Study of plasma meniscus and beam halo in negative ion sources using three dimension in real space and three dimension in velocity space particle in cell model

    International Nuclear Information System (INIS)

    Nishioka, S.; Goto, I.; Hatayama, A.; Miyamoto, K.; Okuda, S.; Fukano, A.

    2014-01-01

    Our previous study by two dimension in real space and three dimension in velocity space-particle in cell model shows that the curvature of the plasma meniscus causes the beam halo in the negative ion sources. The negative ions extracted from the periphery of the meniscus are over-focused in the extractor due to the electrostatic lens effect, and consequently become the beam halo. The purpose of this study is to verify this mechanism with the full 3D model. It is shown that the above mechanism is essentially unchanged even in the 3D model, while the fraction of the beam halo is significantly reduced to 6%. This value reasonably agrees with the experimental result

  6. Optimization of fuel-cell tram operation based on two dimension dynamic programming

    Science.gov (United States)

    Zhang, Wenbin; Lu, Xuecheng; Zhao, Jingsong; Li, Jianqiu

    2018-02-01

    This paper proposes an optimal control strategy based on the two-dimension dynamic programming (2DDP) algorithm targeting at minimizing operation energy consumption for a fuel-cell tram. The energy consumption model with the tram dynamics is firstly deduced. Optimal control problem are analyzed and the 2DDP strategy is applied to solve the problem. The optimal tram speed profiles are obtained for each interstation which consist of three stages: accelerate to the set speed with the maximum traction power, dynamically adjust to maintain a uniform speed and decelerate to zero speed with the maximum braking power at a suitable timing. The optimal control curves of all the interstations are connected with the parking time to form the optimal control method of the whole line. The optimized speed profiles are also simplified for drivers to follow.

  7. Shape Recovery of Elastic Red Blood Cells from Shear Flow Induced Deformation in Three Dimensions

    Science.gov (United States)

    Peng, Yan; Gounley, John

    2015-11-01

    Red blood cells undergo substantial shape changes in vivo. Modeled as an elastic capsule, the shape recovery of a three dimensional biconcave capsule from shear flow is studied for different preferred elastic and bending configuration. The fluid-structure interaction is modeled using the multiple-relaxation time lattice Boltzmann (LBM) and immersed boundary (IBM) methods. Based on the studies of the limited shape memory observed in three dimensions, the shape recovery is caused by the preferred elastic configuration, at least when paired with a constant spontaneous curvature. For these capsules, the incompleteness of the shape recovery observed precludes any conjecture about whether a single or multiple phase(s) are necessary to describe the recovery process. Longer simulations and a more stable methodology will be necessary. Y. Peng acknowledges support from Old Dominion University Research Foundation Grant #503921 and National Science Foundation Grant DMS-1319078.

  8. Interconnection between the geometry and the structure of unit cells of substances in inorganic chemistry

    International Nuclear Information System (INIS)

    Eliseev, A.A.; Kuz'micheva, G.M.

    1979-01-01

    Regularity of interconnection between the geometry and the structure of elementary cells of inorganic compounds is investigated. Structural motives on the basis of NaCl structure for all phases of rare earth chalcogenides are built. It is shown that compounds (phases of variable content), detected on 23 (out of 48 possible) state diagrams of rare earths chalcogen binary systems are closely bound both from the viewpoint of geometric dimensions of elementary cells and structural motives. It is shown that using ion representations the number of formula units in the cell of a new rare earth chalcogenide can be calculated and its structural motif can be built

  9. Lithium-Ion Cell Charge-Control Unit Developed

    Science.gov (United States)

    Reid, Concha M.; Manzo, Michelle A.; Buton, Robert M.; Gemeiner, Russel

    2005-01-01

    A lithium-ion (Li-ion) cell charge-control unit was developed as part of a Li-ion cell verification program. This unit manages the complex charging scheme that is required when Li-ion cells are charged in series. It enables researchers to test cells together as a pack, while allowing each cell to charge individually. This allows the inherent cell-to-cell variations to be addressed on a series string of cells and reduces test costs substantially in comparison to individual cell testing.

  10. Introduction: Philosophers of the World Unite! Theorising Digital Labour and Virtual Work—Definitions, Dimensions, and Forms

    Directory of Open Access Journals (Sweden)

    Marisol Sandoval

    2014-09-01

    Full Text Available In 1845, Karl Marx (1845, 571 formulated the 11th Feuerbach Thesis: “The philosophers have only interpreted the world in various ways; the point is to change it.” Today, interpreting the world has become an important form of labour that is expressed on and with the help of digital media. In this context it has become common to talk about digital labour and virtual work. Yet the changes that digital, social, and mobile media bring about in the world of labour and work have thus far only been little theoretically interpreted. In order to change the information society for the better, we first have to interpret digital labour with the help of critical theories. Social theorists of the world from different fields, backgrounds, interdisciplines, transdisciplines, and disciplines have to unite for this collective philosophical task. This special issue of tripleC: Communication, Capitalism & Critique aims to contribute to building a theoretical framework for the critical analysis of digital labour, virtual work, and related concepts that can initiate further debates, inform empirical studies, and inspire social struggles connected to work and labour in and beyond digital capitalism. The papers collected in this special issue (a provide systematic definitions of digital labour, (b analyse its specific dimension, and (c discuss different forms of digital labour.

  11. Cross-section covariance propagation for LWR fuel cells in one and two dimensions - 308

    International Nuclear Information System (INIS)

    Ball, M.; Novog, D.R.; Parisi, C.; D'Auria, F.

    2010-01-01

    Within the framework of the Uncertainty Analysis in Modeling (UAM) for Design, Operation and Safety Analysis of LWRs Benchmark sponsored by the OECD/NEA, a tool has been developed for the propagation of covariance uncertainty through resonance self-shielding and other neutron kinetics calculations using a direct, cross-section generation and substitution approach. The motivation behind the work described in this paper was to develop a portable uncertainty propagation tool that could be easily implemented with several neutron kinetics codes, without relying on detailed knowledge of the internal workings of those codes or access to adjoint solutions. Implemented initially with the SCALE code package, 'self-shielded' covariance matrices for common LWR fuel cells have been calculated, as well as contributions to K eff uncertainty by selected neutron cross-sections and processes in both one and two dimensions. The one dimensional results generated by the tool are compared against those obtained using the TSUNAMI-1D module of SCALE in order to verify the efficacy of the methodology. One-dimensional results show good agreement with TSUNAMI-1D, but there is also an indication that the loss of dimensionality corresponding to one-dimensional equivalent geometries of two-dimensional fuel cells may lead to significant changes in the calculated uncertainty on K eff arising from particular neutron-nuclide reactions. (authors)

  12. The fractal dimension of cell membrane correlates with its capacitance: A new fractal single-shell model

    Science.gov (United States)

    Wang, Xujing; Becker, Frederick F.; Gascoyne, Peter R. C.

    2010-01-01

    The scale-invariant property of the cytoplasmic membrane of biological cells is examined by applying the Minkowski–Bouligand method to digitized scanning electron microscopy images of the cell surface. The membrane is found to exhibit fractal behavior, and the derived fractal dimension gives a good description of its morphological complexity. Furthermore, we found that this fractal dimension correlates well with the specific membrane dielectric capacitance derived from the electrorotation measurements. Based on these findings, we propose a new fractal single-shell model to describe the dielectrics of mammalian cells, and compare it with the conventional single-shell model (SSM). We found that while both models fit with experimental data well, the new model is able to eliminate the discrepancy between the measured dielectric property of cells and that predicted by the SSM. PMID:21198103

  13. Charge-Control Unit for Testing Lithium-Ion Cells

    Science.gov (United States)

    Reid, Concha M.; Mazo, Michelle A.; Button, Robert M.

    2008-01-01

    A charge-control unit was developed as part of a program to validate Li-ion cells packaged together in batteries for aerospace use. The lithium-ion cell charge-control unit will be useful to anyone who performs testing of battery cells for aerospace and non-aerospace uses and to anyone who manufacturers battery test equipment. This technology reduces the quantity of costly power supplies and independent channels that are needed for test programs in which multiple cells are tested. Battery test equipment manufacturers can integrate the technology into their battery test equipment as a method to manage charging of multiple cells in series. The unit manages a complex scheme that is required for charging Li-ion cells electrically connected in series. The unit makes it possible to evaluate cells together as a pack using a single primary test channel, while also making it possible to charge each cell individually. Hence, inherent cell-to-cell variations in a series string of cells can be addressed, and yet the cost of testing is reduced substantially below the cost of testing each cell as a separate entity. The unit consists of electronic circuits and thermal-management devices housed in a common package. It also includes isolated annunciators to signal when the cells are being actively bypassed. These annunciators can be used by external charge managers or can be connected in series to signal that all cells have reached maximum charge. The charge-control circuitry for each cell amounts to regulator circuitry and is powered by that cell, eliminating the need for an external power source or controller. A 110-VAC source of electricity is required to power the thermal-management portion of the unit. A small direct-current source can be used to supply power for an annunciator signal, if desired.

  14. Topological cell decomposition and dimension theory in P-minimal fields

    OpenAIRE

    Cubides-Kovacsics, Pablo; Darnière, Luck; Leenknegt, Eva

    2015-01-01

    This paper addresses some questions about dimension theory for P-minimal structures. We show that, for any definable set A, the dimension of the frontier of A is strictly smaller than the dimension of A itself, and that A has a decomposition into definable, pure-dimensional components. This is then used to show that the intersection of finitely many definable dense subsets of A is still dense in A. As an application, we obtain that any m-ary definable function is continuous on a dense, relati...

  15. Unit cell geometry of 3-D braided structures

    Science.gov (United States)

    Du, Guang-Wu; Ko, Frank K.

    1993-01-01

    The traditional approach used in modeling of composites reinforced by three-dimensional (3-D) braids is to assume a simple unit cell geometry of a 3-D braided structure with known fiber volume fraction and orientation. In this article, we first examine 3-D braiding methods in the light of braid structures, followed by the development of geometric models for 3-D braids using a unit cell approach. The unit cell geometry of 3-D braids is identified and the relationship of structural parameters such as yarn orientation angle and fiber volume fraction with the key processing parameters established. The limiting geometry has been computed by establishing the point at which yarns jam against each other. Using this factor makes it possible to identify the complete range of allowable geometric arrangements for 3-D braided preforms. This identified unit cell geometry can be translated to mechanical models which relate the geometrical properties of fabric preforms to the mechanical responses of composite systems.

  16. Buckling behavior of origami unit cell facets under compressive loads

    Science.gov (United States)

    Kshad, Mohamed Ali Emhmed; Naguib, Hani E.

    2018-03-01

    Origami structures as cores for sandwich structures are designed to withstand the compressive loads and to dissipate compressive energy. The deformation of the origami panels and the unit cell facets are the primary factors behind the compressive energy dissipation in origami structures. During the loading stage, the origami structures deform through the folding and unfolding process of the unit cell facets, and also through the plastic deformation of the facets. This work presents a numerical study of the buckling behavior of different origami unit cell elements under compressive loading. The studied origami configurations were Miura and Ron-Resch-like origami structures. Finite element package was used to model the origami structures. The study investigated the buckling behavior of the unit cell facets of two types of origami structures Miura origami and Ron-Resch-Like origami structures. The simulation was conducted using ANSYS finite element software, in which the model of the unit cell represented by shell elements, and the eigenvalues buckling solver was used to predict the theoretical buckling of the unit cell elements.

  17. Erect penile length and circumference dimensions of 1,661 sexually active men in the United States.

    Science.gov (United States)

    Herbenick, Debby; Reece, Michael; Schick, Vanessa; Sanders, Stephanie A

    2014-01-01

    Penile size continues to receive popular and empirical attention. Little is known about the process of self-measurement and whether the behaviors a man engages in to become erect for self-measurement are associated with his erect penile dimensions. The article aims to assess men's erect penile dimensions in a study in which the men would presumably be motivated to report accurate information about their penis size; and to explore associations between men's erect penile dimensions, their method of measurement, and their demographics. Data are from an Internet-based baseline phase of a large prospective daily diary study that compared men's use of a standard-sized condom to men's use of a condom sized to fit their erect penis. The main outcomes are participant characteristics, activities engaged in during self-measurement process, and self-reported erect penile length and circumference. For this sample of 1,661 men, the mean erect penile length was 14.15 cm (SD = 2.66; range = 4 to 26 cm), and the mean erect penile circumference was 12.23 cm (SD = 2.23; range = 3 to 19). Participant characteristics were not associated with measured length or circumference. Most men measured their penis while alone, using hand stimulation to become erect. In this sample of men who measured their erect penile length and circumference for the purposes of receiving a condom sized to fit their erect penis, we found a mean erect penile length of 14.15 cm and a mean erect penile circumference of 12.23 cm. The self-reported erect penile dimensions in this study are consistent with other penile dimension research. Also, findings suggest that mode of getting an erection may influence erect penile dimensions. Additionally, how a man becomes erect for self-measurement may be associated with his erect penile length and/or circumference. © 2013 International Society for Sexual Medicine.

  18. Advanced fuel cell development in the United States

    International Nuclear Information System (INIS)

    Ackerman, J.P.

    1984-01-01

    Both molten carbonate and solid oxide fuel cells are being developed in the United States to complement and/or supplant phosphoric acid cells for commercial and utility use. This paper described the two technologies and the programs for their development

  19. Fabrication and characteristics of unit cell for SOFC

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Gwi-Yeol; Eom, Seung-Wook; Moon, Seong-In [Korea Electrotechnology Research Institute, Kyongnam (Korea, Republic of)] [and others

    1996-12-31

    Research and development on solid oxide fuel cells in Korea have been mainly focused on unit cell and small stack. Fuel cell system is called clean generation system which not cause NOx or SOx. It is generation efficiency come to 50-60% in contrast to 40% of combustion generation system. Among the fuel cell system, solid oxide fuel cell is constructed of ceramics, so stack construction is simple, power density is very high, and there are no corrosion problems. The object of this study is to develop various composing material for SOFC generation system, and to test unit cell performance manufactured. So we try to present a guidance for developing mass power generation system. We concentrated on development of manufacturing process for cathode, anode and electrolyte.

  20. Sociocultural dimensions of supply and demand for natural aggregate; examples from the Mid-Atlantic region, United States

    Science.gov (United States)

    Robinson, Gilpin R.; Brown, William M.

    2002-01-01

    The United States uses large quantities of natural aggregate to build and maintain a continuously expanding infrastructure. In recent years, per capita demand for aggregate in the United States has grown to about 9.7 metric tons (10.7 tons) per person per year. Over the next 25 years, the aggregate industry expects to mine quantities equivalent to all aggregate mined in the United States over the past 100 years. The issues surrounding supply and demand for aggregate in the mid-Atlantic states of Maryland, Pennsylvania, Virginia, and West Virginia illustrate competing requirements for industrial minerals and many simultaneous social and environmental objectives.

  1. The effects of loading on the preload and dimensions of the abutment screw for a 3-unit cantilever-fixed prosthesis design.

    Science.gov (United States)

    Setia, Gaurav; Yousef, Hoda; Ehrenberg, David; Luke, Allyn; Weiner, Saul

    2013-08-01

    The purpose of this study was to use an in vitro model system to compare the effects on the screw torque and screw dimensions within 2 commercially available implant systems from occlusal loading on a cantilevered-fixed partial denture. Cantilevered implant-supported 3-unit prostheses with 2 premolar abutments and 1 premolar pontic (7.3 mm in length) were made on resin casts containing 2 implant analogs for 2 implant systems: BioLok Silhouette Tapered Implant System (Birmingham, AL) and Zimmer Tapered Screw-Vent Implant System (Carlsbad, CA) with 10 samples in each group. Each sample was loaded with either of 2 protocols: (1) a load of 50 N on the cantilevered pontic unit and (2) a loading of 150 N on all 3 units. The outcome measures were (1) changes in residual torque of the abutment screws and (2) changes in screw dimension. The BioLok Silhouette Tapered Implant group demonstrated slight but statistically significant torque loss 18.8% to 28.5% in both abutment screws for both protocols, P ≤ 0.05, without any changes in screw dimension. In the Zimmer Tapered Screw-Vent Implant group, there was a significant elongation of the abutment screws and a markedly significant 44.4%, (P ≤ 0.01) loss in torque in the mesial screw and a 28.5%, (P ≤ 0.05) loss in torque in the distal screw when the cantilever alone was loaded. Differences in screw design influence the maintenance of preload and distortion of the shank. The influence of the interface design, namely an internal hex of 1 mm versus an external hex did not influence the preload. Cantilevered prostheses can cause loss of torque and dimensional changes in abutment screws.

  2. Effects of distribution density and cell dimension of 3D vegetation model on canopy NDVI simulation base on DART

    Science.gov (United States)

    Tao, Zhu; Shi, Runhe; Zeng, Yuyan; Gao, Wei

    2017-09-01

    The 3D model is an important part of simulated remote sensing for earth observation. Regarding the small-scale spatial extent of DART software, both the details of the model itself and the number of models of the distribution have an important impact on the scene canopy Normalized Difference Vegetation Index (NDVI).Taking the phragmitesaustralis in the Yangtze Estuary as an example, this paper studied the effect of the P.australias model on the canopy NDVI, based on the previous studies of the model precision, mainly from the cell dimension of the DART software and the density distribution of the P.australias model in the scene, As well as the choice of the density of the P.australiass model under the cost of computer running time in the actual simulation. The DART Cell dimensions and the density of the scene model were set by using the optimal precision model from the existing research results. The simulation results of NDVI with different model densities under different cell dimensions were analyzed by error analysis. By studying the relationship between relative error, absolute error and time costs, we have mastered the density selection method of P.australias model in the simulation of small-scale spatial scale scene. Experiments showed that the number of P.australias in the simulated scene need not be the same as those in the real environment due to the difference between the 3D model and the real scenarios. The best simulation results could be obtained by keeping the density ratio of about 40 trees per square meter, simultaneously, of the visual effects.

  3. Longevity-conscious dimensioning and power management of the hybrid energy storage system in a fuel cell hybrid electric bus

    International Nuclear Information System (INIS)

    Hu, Xiaosong; Johannesson, Lars; Murgovski, Nikolce; Egardt, Bo

    2015-01-01

    Highlights: • Hybrid energy storage system is optimally sized and controlled for a hybrid bus. • Dynamic battery health model is incorporated in the optimization. • Convex programming is efficient for optimizing hybrid propulsion systems. • Optimal battery replacement strategy is explored. • Comparison to the battery-only option is made in the health-aware optimization. - Abstract: Energy storage systems (ESSs) play an important role in the performance and economy of electrified vehicles. Hybrid energy storage system (HESS) combining both lithium-ion cells and supercapacitors is one of the most promising solutions. This paper discusses the optimal HESS dimensioning and energy management of a fuel cell hybrid electric bus. Three novel contributions are added to the relevant literature. First, efficient convex programming is used to simultaneously optimize the HESS dimension (including sizes of both the lithium-ion battery pack and the supercapacitor stack) and the power allocation between the HESS and the fuel cell system (FCS) of the hybrid bus. In the combined plant/controller optimization problem, a dynamic battery State-of-Health (SOH) model is integrated to quantitatively examine the impact of the battery replacement strategy on both the HESS size and the bus economy. Second, the HESS and the battery-only ESS options are systematically compared in the proposed optimization framework. Finally, the battery-health-perceptive HESS optimization outcome is contrasted to the ideal one neglecting the battery degradation (assuming that the battery is durable over the bus service period without deliberate power regulation)

  4. Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models.

    Science.gov (United States)

    Hedayati, R; Sadighi, M; Mohammadi-Aghdam, M; Zadpoor, A A

    2016-03-01

    Additive manufacturing (AM) has enabled fabrication of open-cell porous biomaterials based on repeating unit cells. The micro-architecture of the porous biomaterials and, thus, their physical properties could then be precisely controlled. Due to their many favorable properties, porous biomaterials manufactured using AM are considered as promising candidates for bone substitution as well as for several other applications in orthopedic surgery. The mechanical properties of such porous structures including static and fatigue properties are shown to be strongly dependent on the type of the repeating unit cell based on which the porous biomaterial is built. In this paper, we study the mechanical properties of porous biomaterials made from a relatively new unit cell, namely truncated cube. We present analytical solutions that relate the dimensions of the repeating unit cell to the elastic modulus, Poisson's ratio, yield stress, and buckling load of those porous structures. We also performed finite element modeling to predict the mechanical properties of the porous structures. The analytical solution and computational results were found to be in agreement with each other. The mechanical properties estimated using both the analytical and computational techniques were somewhat higher than the experimental data reported in one of our recent studies on selective laser melted Ti-6Al-4V porous biomaterials. In addition to porosity, the elastic modulus and Poisson's ratio of the porous structures were found to be strongly dependent on the ratio of the length of the inclined struts to that of the uninclined (i.e. vertical or horizontal) struts, α, in the truncated cube unit cell. The geometry of the truncated cube unit cell approaches the octahedral and cube unit cells when α respectively approaches zero and infinity. Consistent with those geometrical observations, the analytical solutions presented in this study approached those of the octahedral and cube unit cells when

  5. Ethical dimensions of quality of life in aging: autonomy vs. collectivism in the United States and Canada.

    Science.gov (United States)

    Clark, P G

    1991-10-01

    Ethical concepts lie at the core of how quality of life in aging is defined and enhanced. Although recent American attention has been largely focused on autonomy as an important value for quality of life in old age, there is real danger in emphasizing personal independence at the expense of community or collectivism. This conceptual analysis compares and contrasts these value orientations in the U.S. and Canada and examines their relationship to the concept of quality of life in aging. It also explores implications of the analysis for expanding our understanding of the importance of value dimensions in comparative gerontology, and suggests ways of integrating individualistic and collectivistic ideals in gerontological policies and programs.

  6. Learning about the Unit Cell and Crystal Lattice with Computerized Simulations and Games: A Pilot Study

    Science.gov (United States)

    Luealamai, Sutha; Panijpan, Bhinyo

    2012-01-01

    The authors have developed a computer-based learning module on the unit cell of various types of crystal. The module has two components: the virtual unit cell (VUC) part and the subsequent unit cell hunter part. The VUC is a virtual reality simulation for students to actively arrive at the unit cell from exploring, from a broad view, the crystal…

  7. In vitro organogenesis in three dimensions: self-organising stem cells.

    Science.gov (United States)

    Sasai, Yoshiki; Eiraku, Mototsugu; Suga, Hidetaka

    2012-11-01

    Organ formation during embryogenesis is a complex process that involves various local cell-cell interactions at the molecular and mechanical levels. Despite this complexity, organogenesis can be modelled in vitro. In this article, we focus on two recent examples in which embryonic stem cells can self-organise into three-dimensional structures - the optic cup and the pituitary epithelium; and one case of self-organising adult stem cells - the gut epithelium. We summarise how these approaches have revealed intrinsic programs that drive locally autonomous modes of organogenesis and homeostasis. We also attempt to interpret the results of previous in vivo studies of retinal development in light of the self-organising nature of the retina.

  8. Caspase inhibitors affect the kinetics and dimensions of tracheary elements in xylogenic Zinnia (Zinnia elegans cell cultures

    Directory of Open Access Journals (Sweden)

    Schel Jan HN

    2010-08-01

    Full Text Available Abstract Background The xylem vascular system is composed of fused dead, hollow cells called tracheary elements (TEs that originate through trans-differentiation of root and shoot cambium cells. TEs undergo autolysis as they differentiate and mature. The final stage of the formation of TEs in plants is the death of the involved cells, a process showing some similarities to programmed cell death (PCD in animal systems. Plant proteases with functional similarity to proteases involved in mammalian apoptotic cell death (caspases are suggested as an integral part of the core mechanism of most PCD responses in plants, but participation of plant caspase-like proteases in TE PCD has not yet been documented. Results Confocal microscopic images revealed the consecutive stages of TE formation in Zinnia cells during trans-differentiation. Application of the caspase inhibitors Z-Asp-CH2-DCB, Ac-YVAD-CMK and Ac-DEVD-CHO affected the kinetics of formation and the dimensions of the TEs resulting in a significant delay of TE formation, production of larger TEs and in elimination of the 'two-wave' pattern of TE production. DNA breakdown and appearance of TUNEL-positive nuclei was observed in xylogenic cultures and this was suppressed in the presence of caspase inhibitors. Conclusions To the best of our knowledge this is the first report showing that caspase inhibitors can modulate the process of trans-differentiation in Zinnia xylogenic cell cultures. As caspase inhibitors are closely associated with cell death inhibition in a variety of plant systems, this suggests that the altered TE formation results from suppression of PCD. The findings presented here are a first step towards the use of appropriate PCD signalling modulators or related molecular genetic strategies to improve the hydraulic properties of xylem vessels in favour of the quality and shelf life of plants or plant parts.

  9. Polymer electrolyte fuel cell mini power unit for portable application

    Energy Technology Data Exchange (ETDEWEB)

    Urbani, F.; Squadrito, G.; Barbera, O.; Giacoppo, G.; Passalacqua, E. [CNR-ITAE, via Salita S. Lucia sopra Contesse n. 5, 98126 S. Lucia, Messina (Italy); Zerbinati, O. [Universita del Piemonte Orientale, Dip. di Scienze dell' Ambiente e della Vita, via Bellini 25/g, 15100 Alessandria (Italy)

    2007-06-20

    This paper describes the design, realisation and test of a power unit based on a polymer electrolyte fuel cell, operating at room temperature, for portable application. The device is composed of an home made air breathing fuel cell stack, a metal hydride tank for H{sub 2} supply, a dc-dc converter for power output control and a fan for stack cooling. The stack is composed by 10 cells with an active surface of 25 cm{sup 2} and produces a rated power of 15 W at 6 V and 2 A. The stack successfully runs with end-off fed hydrogen without appreciable performance degradation during the time. The final assembled system is able to generate 12 W at 9.5 V, and power a portable DVD player for 3 h in continuous. The power unit has collected about 100 h of operation without maintenance. (author)

  10. Overcoming the low-dimension crisis in the active zone of fuel cells

    Czech Academy of Sciences Publication Activity Database

    Kompan, M. E.; Sapurina, I. Yu.; Stejskal, Jaroslav

    2006-01-01

    Roč. 32, č. 3 (2006), s. 213-216 ISSN 1063-7850 Institutional research plan: CEZ:AV0Z40500505 Keywords : hydrogen fuel cell * electrochemical processes Subject RIV: CD - Macromolecular Chemistry Impact factor: 0.491, year: 2006

  11. THE GERMLINE STEM CELL NICHE UNIT IN MAMMALIAN TESTES

    Science.gov (United States)

    Oatley, Jon M.; Brinster, Ralph L.

    2014-01-01

    This review addresses current understanding of the germline stem cell niche unit in mammalian testes. Spermatogenesis is a classic model of tissue-specific stem cell function relying on self-renewal and differentiation of spermatogonial stem cells (SSCs). These fate decisions are influenced by a niche microenvironment composed of a growth factor milieu that is provided by several testis somatic support cell populations. Investigations over the last two decades have identified key determinants of the SSC niche including cytokines that regulate SSC functions and support cells providing these factors, adhesion molecules that influence SSC homing, and developmental heterogeneity of the niche during postnatal aging. Emerging evidence suggests that Sertoli cells are a key support cell population influencing the formation and function of niches by secreting soluble factors and possibly orchestrating contributions of other support cells. Investigations with mice have shown that niche influence on SSC proliferation differs during early postnatal development and adulthood. Moreover, there is mounting evidence of an age-related decline in niche function, which is likely influenced by systemic factors. Defining the attributes of stem cell niches is key to developing methods to utilize these cells for regenerative medicine. The SSC population and associated niche comprise a valuable model system for study that provides fundamental knowledge about the biology of tissue-specific stem cells and their capacity to sustain homeostasis of regenerating tissue lineages. While the stem cell is essential for maintenance of all self-renewing tissues and has received considerable attention, the role of niche cells is at least as important and may prove to be more receptive to modification in regenerative medicine. PMID:22535892

  12. The fundamental unit of pain is the cell.

    Science.gov (United States)

    Reichling, David B; Green, Paul G; Levine, Jon D

    2013-12-01

    The molecular/genetic era has seen the discovery of a staggering number of molecules implicated in pain mechanisms [18,35,61,69,96,133,150,202,224]. This has stimulated pharmaceutical and biotechnology companies to invest billions of dollars to develop drugs that enhance or inhibit the function of many these molecules. Unfortunately this effort has provided a remarkably small return on this investment. Inevitably, transformative progress in this field will require a better understanding of the functional links among the ever-growing ranks of "pain molecules," as well as their links with an even larger number of molecules with which they interact. Importantly, all of these molecules exist side-by-side, within a functional unit, the cell, and its adjacent matrix of extracellular molecules. To paraphrase a recent editorial in Science magazine [223], although we live in the Golden age of Genetics, the fundamental unit of biology is still arguably the cell, and the cell is the critical structural and functional setting in which the function of pain-related molecules must be understood. This review summarizes our current understanding of the nociceptor as a cell-biological unit that responds to a variety of extracellular inputs with a complex and highly organized interaction of signaling molecules. We also discuss the insights that this approach is providing into peripheral mechanisms of chronic pain and sex dependence in pain.

  13. Titania nanotubes with adjustable dimensions for drug reservoir sites and enhanced cell adhesion.

    Science.gov (United States)

    Çalışkan, Nazlı; Bayram, Cem; Erdal, Ebru; Karahaliloğlu, Zeynep; Denkbaş, Emir Baki

    2014-02-01

    This study aims to generate a bactericidal agent releasing surface via nanotube layer on titanium metal and to investigate how aspect ratio of nanotubes affects drug elution time and cell proliferation. Titania nanotube layers were generated on metal surfaces by anodic oxidation at various voltage and time parameters. Gentamicin loading was carried out via simple pipetting and the samples were tested against S. aureus for the efficacy of the applied modification. Drug releasing time and cell proliferation were also tested in vitro. Titania nanotube layers with varying diameters and lengths were prepared after anodization and anodizing duration was found as the most effective parameter for amount of loaded drug and drug releasing time. Drug elution lasted up to 4 days after anodizing for 80 min of the samples, whereas release completed in 24 h when the samples were anodized for 20 min. All processed samples had bactericidal properties against S. aureus organism except unmodified titanium, which was also subjected to drug incorporation step. The anodization also enhanced water wettability and cell adhesion results. Anodic oxidation is an effective surface modification to enhance tissue-implant interactions and also resultant titania layer can act as a drug reservoir for the release of bactericidal agents. The use of implants as local drug eluting devices is promising but further in vivo testing is required. Copyright © 2013 Elsevier B.V. All rights reserved.

  14. Chapter 6: cubic membranes the missing dimension of cell membrane organization.

    Science.gov (United States)

    Almsherqi, Zakaria A; Landh, Tomas; Kohlwein, Sepp D; Deng, Yuru

    2009-01-01

    Biological membranes are among the most fascinating assemblies of biomolecules: a bilayer less than 10 nm thick, composed of rather small lipid molecules that are held together simply by noncovalent forces, defines the cell and discriminates between "inside" and "outside", survival, and death. Intracellular compartmentalization-governed by biomembranes as well-is a characteristic feature of eukaryotic cells, which allows them to fulfill multiple and highly specialized anabolic and catabolic functions in strictly controlled environments. Although cellular membranes are generally visualized as flat sheets or closely folded isolated objects, multiple observations also demonstrate that membranes may fold into "unusual", highly organized structures with 2D or 3D periodicity. The obvious correlation of highly convoluted membrane organizations with pathological cellular states, for example, as a consequence of viral infection, deserves close consideration. However, knowledge about formation and function of these highly organized 3D periodic membrane structures is scarce, primarily due to the lack of appropriate techniques for their analysis in vivo. Currently, the only direct way to characterize cellular membrane architecture is by transmission electron microscopy (TEM). However, deciphering the spatial architecture solely based on two-dimensionally projected TEM images is a challenging task and prone to artifacts. In this review, we will provide an update on the current progress in identifying and analyzing 3D membrane architectures in biological systems, with a special focus on membranes with cubic symmetry, and their potential role in physiological and pathophysiological conditions. Proteomics and lipidomics approaches in defined experimental cell systems may prove instrumental to understand formation and function of 3D membrane morphologies.

  15. Titania nanotubes with adjustable dimensions for drug reservoir sites and enhanced cell adhesion

    International Nuclear Information System (INIS)

    Çalışkan, Nazlı; Bayram, Cem; Erdal, Ebru; Karahaliloğlu, Zeynep; Denkbaş, Emir Baki

    2014-01-01

    This study aims to generate a bactericidal agent releasing surface via nanotube layer on titanium metal and to investigate how aspect ratio of nanotubes affects drug elution time and cell proliferation. Titania nanotube layers were generated on metal surfaces by anodic oxidation at various voltage and time parameters. Gentamicin loading was carried out via simple pipetting and the samples were tested against S. aureus for the efficacy of the applied modification. Drug releasing time and cell proliferation were also tested in vitro. Titania nanotube layers with varying diameters and lengths were prepared after anodization and anodizing duration was found as the most effective parameter for amount of loaded drug and drug releasing time. Drug elution lasted up to 4 days after anodizing for 80 min of the samples, whereas release completed in 24 h when the samples were anodized for 20 min. All processed samples had bactericidal properties against S. aureus organism except unmodified titanium, which was also subjected to drug incorporation step. The anodization also enhanced water wettability and cell adhesion results. Anodic oxidation is an effective surface modification to enhance tissue–implant interactions and also resultant titania layer can act as a drug reservoir for the release of bactericidal agents. The use of implants as local drug eluting devices is promising but further in vivo testing is required. - Highlights: • Titanium surfaces were anodized and a nanotubular titania layer was obtained. • Drug eluting time was found to be increasing with anodizaton time. • Varying nanotube diameters has no effect in drug elution time but amount of incorporated drug

  16. Titania nanotubes with adjustable dimensions for drug reservoir sites and enhanced cell adhesion

    Energy Technology Data Exchange (ETDEWEB)

    Çalışkan, Nazlı; Bayram, Cem; Erdal, Ebru; Karahaliloğlu, Zeynep; Denkbaş, Emir Baki, E-mail: denkbas@hacettepe.edu.tr

    2014-02-01

    This study aims to generate a bactericidal agent releasing surface via nanotube layer on titanium metal and to investigate how aspect ratio of nanotubes affects drug elution time and cell proliferation. Titania nanotube layers were generated on metal surfaces by anodic oxidation at various voltage and time parameters. Gentamicin loading was carried out via simple pipetting and the samples were tested against S. aureus for the efficacy of the applied modification. Drug releasing time and cell proliferation were also tested in vitro. Titania nanotube layers with varying diameters and lengths were prepared after anodization and anodizing duration was found as the most effective parameter for amount of loaded drug and drug releasing time. Drug elution lasted up to 4 days after anodizing for 80 min of the samples, whereas release completed in 24 h when the samples were anodized for 20 min. All processed samples had bactericidal properties against S. aureus organism except unmodified titanium, which was also subjected to drug incorporation step. The anodization also enhanced water wettability and cell adhesion results. Anodic oxidation is an effective surface modification to enhance tissue–implant interactions and also resultant titania layer can act as a drug reservoir for the release of bactericidal agents. The use of implants as local drug eluting devices is promising but further in vivo testing is required. - Highlights: • Titanium surfaces were anodized and a nanotubular titania layer was obtained. • Drug eluting time was found to be increasing with anodizaton time. • Varying nanotube diameters has no effect in drug elution time but amount of incorporated drug.

  17. A heated vapor cell unit for DAVLL in atomic rubidium

    OpenAIRE

    McCarron, Daniel J.; Hughes, Ifan G.; Tierney, Patrick; Cornish, Simon L.

    2007-01-01

    The design and performance of a compact heated vapor cell unit for realizing a dichroic atomic vapor laser lock (DAVLL) for the D2 transitions in atomic rubidium is described. A 5 cm-long vapor cell is placed in a double-solenoid arrangement to produce the required magnetic field; the heat from the solenoid is used to increase the vapor pressure and correspondingly the DAVLL signal. We have characterized experimentally the dependence of important features of the DAVLL signal on magnetic field...

  18. Analysis of spatial relationships in three dimensions: tools for the study of nerve cell patterning

    Directory of Open Access Journals (Sweden)

    Raven Mary A

    2008-07-01

    Full Text Available Abstract Background Multiple technologies have been brought to bear on understanding the three-dimensional morphology of individual neurons and glia within the brain, but little progress has been made on understanding the rules controlling cellular patterning. We describe new matlab-based software tools, now available to the scientific community, permitting the calculation of spatial statistics associated with 3D point patterns. The analyses are largely derived from the Delaunay tessellation of the field, including the nearest neighbor and Voronoi domain analyses, and from the spatial autocorrelogram. Results Our tools enable the analysis of the spatial relationship between neurons within the central nervous system in 3D, and permit the modeling of these fields based on lattice-like simulations, and on simulations of minimal-distance spacing rules. Here we demonstrate the utility of our analysis methods to discriminate between two different simulated neuronal populations. Conclusion Together, these tools can be used to reveal the presence of nerve cell patterning and to model its foundation, in turn informing on the potential developmental mechanisms that govern its establishment. Furthermore, in conjunction with analyses of dendritic morphology, they can be used to determine the degree of dendritic coverage within a volume of tissue exhibited by mature nerve cells.

  19. Composite Bipolar Plate for Unitized Fuel Cell/Electrolyzer Systems

    Science.gov (United States)

    Mittelsteadt, Cortney K.; Braff, William

    2009-01-01

    In a substantial improvement over present alkaline systems, an advanced hybrid bipolar plate for a unitized fuel cell/electrolyzer has been developed. This design, which operates on pure feed streams (H2/O2 and water, respectively) consists of a porous metallic foil filled with a polymer that has very high water transport properties. Combined with a second metallic plate, the pore-filled metallic plates form a bipolar plate with an empty cavity in the center.

  20. Solid Oxide Fuel Cells coupled with a biomass gasification unit

    Directory of Open Access Journals (Sweden)

    Skrzypkiewicz Marek

    2016-01-01

    Full Text Available A possibility of fuelling a solid oxide fuel cell stack (SOFC with biomass fuels can be realized by coupling a SOFC system with a self-standing gasification unit. Such a solution enables multi-fuel operation, elasticity of the system as well as the increase of the efficiency of small-scale biomass-to-electricity conversion units. A system of this type, consisting of biomass gasification unit, gas purification unit, SOFC stack, anode off-gas afterburner and peripherals was constructed and operated successfully. During the process, biomass fuel (wood chips was gasified with air as gasification agent. The gasifier was capable of converting up to 30 kW of fuel to syngas with efficiencies up to 75%. Syngas leaving the gasification unit is delivered to a medium temperature adsorber for sulphur compounds removal. Steam is added to the purified fuel to maintain steam to carbon ratio higher than 2. The syngas then is passed to a SOFC stack through a fuel preheater. In such a configuration it was possible to operate a commercial 1.3 kW stack within its working regime. Conducted tests confirmed successful operation of a SOFC stack fuelled by biomass-sourced syngas.

  1. The Metaboloepigenetic Dimension of Cancer Stem Cells: Evaluating the Market Potential for New Metabostemness-Targeting Oncology Drugs.

    Science.gov (United States)

    Menendez, Javier A

    2015-01-01

    The current global portfolio of oncology drugs is unlikely to produce durable disease remission for millions of cancer patients worldwide. This is due, in part, to the existence of so-called cancer stem cells (CSCs), a particularly aggressive type of malignant cell that is capable of indefinite self-replication, is refractory to conventional treatments, and is skilled at spreading and colonizing distant organs. To date, no drugs from big-league Pharma companies are capable of killing CSCs. Why? Quite simply, a classic drug development approach based on mutated genes and pathological protein products cannot efficiently target the plastic, epigenetic proclivity of cancer tissues to generate CSCs. Recent studies have proposed that certain elite metabolites (oncometabolites) and other common metabolites can significantly influence the establishment and maintenance of epigenetic signatures of stemness and cancer. Consequently, cellular metabolism and the core epigenetic codes, DNA methylation and histone modification, can be better viewed as an integrated metaboloepigenetic dimension of CSCs, which we have recently termed cancer metabostemness. By targeting weaknesses in the bridge connecting metabolism and epigenetics, a new generation of metabostemnessspecific drugs can be generated for potent and long-lasting elimination of life-threatening CSCs. Here I evaluate the market potential of re-modeling the oncology drug pipeline by discovering and developing new metabolic approaches able to target the apparently undruggable epigenetic programs that dynamically regulate the plasticity of non-CSC and CSC cellular states.

  2. Deconstructing dimensions

    International Nuclear Information System (INIS)

    Cohen, A.G.

    2003-01-01

    Extra-dimensional physics is realized as the low-energy limit of lower-dimensional gauge theories. This 'deconstruction' of dimensions provides a UV completion of higher-dimensional theories, and has been used to investigate the physics of extra-dimensions. This technique has also led to a variety of interesting phenomenological applications, especially a new class of models of electroweak superconductivity, called the 'little Higgs'. (author)

  3. Optimization parametric study of the fuel pellet dimensions

    International Nuclear Information System (INIS)

    Mai, L.A.

    1986-01-01

    A method to determine the dimensions of fuel pellets, is presented, obtaining the maximum core reactivity at the end of cycle. Other unit cell parameters, fixed in a given reactor, are considered constants. It is seen that the cycle length is an important parameter in the determinations of the pellet dimensions. The optimal pellet radius is found as an increasing function of the cycle length. All calculation have been performed using the HAMMER code. (Author) [pt

  4. Comparison of gas membrane separation cascades using conventional separation cell and two-unit separation cells

    International Nuclear Information System (INIS)

    Ohno, Masayoshi; Morisue, Tetsuo; Ozaki, Osamu; Miyauchi, Terukatsu.

    1978-01-01

    The adoption of two-unit separation cells in radioactive rare gas membrane separation equipment enhances the separation factor, but increases the required membrane area and compressive power. An analytical economic evaluation was undertaken to compare the conventional separation cell with the two-unit separation cells, adopting as parameters the number of cascade stages, the membrane area and the operating power requirements. This paper describes the models used for evaluating the separation performance and the economics of cascade embodying these different concepts of separation cell taken up for study, and the results obtained for the individual concepts are mutually compared. It proved that, in respect of the number required of cascade stages, of operating power requirements and of the annual expenditure, better performance could always be expected of the two-unit separation cells as compared with the conventional separation cell, at least in the range of parameters adopted in this study. As regards the minimum membrane area, the conventional separation cell and the series-type separation cell yielded almost the same values, with the parallel-type separation cell falling somewhat behind. (auth.)

  5. Zeroing in on red blood cell unit expiry.

    Science.gov (United States)

    Ayyalil, Fathima; Irwin, Greg; Ross, Bryony; Manolis, Michael; Enjeti, Anoop K

    2017-12-01

    Expiry of red blood cell (RBC) units is a significant contributor to wastage of precious voluntary donations. Effective strategies aimed at optimal resource utilization are required to minimize wastage. This retrospective study analyzed the strategic measures implemented to reduce expiry of RBC units in an Australian tertiary regional hospital. The measures, which included inventory rearrangement, effective stock rotation, and the number of emergency courier services required during a 24-month period, were evaluated. There was no wastage of RBC units due to expiry over the 12 months after policy changes. Before these changes, approximately half of RBC wastage (261/511) was due to expiry. The total number of transfusions remained constant in this period and there was no increase in the use of emergency couriers. Policy changes implemented were decreasing the RBC inventory level by one-third and effective stock rotation and using a computerized system to link the transfusion services across the area. Effective stock rotation resulted in a reduction in older blood (>28 days) received in the main laboratory rotated from peripheral hospitals, down from 6%-41% to 0%-2.5%. Age-related expiry of blood products is preventable and can be significantly reduced by improving practices in the pathology service. This study provides proof of principle for "zero tolerance for RBC unit expiry" across a large networked blood banking service. © 2017 The Authors Transfusion published by Wiley Periodicals, Inc. on behalf of AABB.

  6. A program for the derivation of crystal unit cell parameters from X-ray powder diffraction measurements

    International Nuclear Information System (INIS)

    Ferguson, I.F.; Rogerson, A.H.

    1984-01-01

    The program, FIRESTAR, determines the dimensions of a crystallographic unit cell from a set of X-ray powder diffraction measurements corresponding to a set of Bragg reflections, provided that the crystal system applicable is known and the Bragg reflections have been indexed. The program includes a range of possible extrapolation functions, and the data may be weighted. Provision is made for detecting and rejecting a single 'bad' measurement, and then rejecting measurements which lie outside an error limit set in the input data. (orig.)

  7. An extra dimension to decision-making in animals: the three-way trade-off between speed, effort per-unit-time and accuracy.

    Science.gov (United States)

    de Froment, Adrian J; Rubenstein, Daniel I; Levin, Simon A

    2014-12-01

    The standard view in biology is that all animals, from bumblebees to human beings, face a trade-off between speed and accuracy as they search for resources and mates, and attempt to avoid predators. For example, the more time a forager spends out of cover gathering information about potential food sources the more likely it is to make accurate decisions about which sources are most rewarding. However, when the cost of time spent out of cover rises (e.g. in the presence of a predator) the optimal strategy is for the forager to spend less time gathering information and to accept a corresponding decline in the accuracy of its decisions. We suggest that this familiar picture is missing a crucial dimension: the amount of effort an animal expends on gathering information in each unit of time. This is important because an animal that can respond to changing time costs by modulating its level of effort per-unit-time does not have to accept the same decrease in accuracy that an animal limited to a simple speed-accuracy trade-off must bear in the same situation. Instead, it can direct additional effort towards (i) reducing the frequency of perceptual errors in the samples it gathers or (ii) increasing the number of samples it gathers per-unit-time. Both of these have the effect of allowing it to gather more accurate information within a given period of time. We use a modified version of a canonical model of decision-making (the sequential probability ratio test) to show that this ability to substitute effort for time confers a fitness advantage in the face of changing time costs. We predict that the ability to modulate effort levels will therefore be widespread in nature, and we lay out testable predictions that could be used to detect adaptive modulation of effort levels in laboratory and field studies. Our understanding of decision-making in all species, including our own, will be improved by this more ecologically-complete picture of the three-way tradeoff between time

  8. Trends in US minority red blood cell unit donations.

    Science.gov (United States)

    Yazer, Mark H; Delaney, Meghan; Germain, Marc; Karafin, Matthew S; Sayers, Merlyn; Vassallo, Ralph; Ziman, Alyssa; Shaz, Beth

    2017-05-01

    To provide the appropriately diverse blood supply necessary to support alloimmunized and chronically transfused patients, minority donation recruitment programs have been implemented. This study investigated temporal changes in minority red blood cell (RBC) donation patterns in the United States. Data on donor race and ethnicity from 2006 through 2015, including the number of unique donors, collections, RBCs successfully donated, and average annual number of RBC donations per donor (donor fraction), were collected from eight US blood collectors. Minority donors were stratified into the following groups: Asian, black or African American, Hispanic or Latino, Native Indian or Alaska Native, Native Hawaiian or other Pacific Islander, white, multiracial/other, and no answer/not sure. Over the 10-year period, white donors annually constituted the majority of unique donors (range, 70.7%-73.9%), had the greatest proportion of collections (range, 76.1%-79.8%), and donated the greatest proportion of RBC units (range, 76.3%-80.2%). These donors also had the highest annual donor fraction (range, 1.82-1.91 units per donor). Black or African American donors annually constituted between 4.9 and 5.2% of all donors during the study period and donated between 4.0 and 4.3% of all RBC units. Linear regression analysis revealed decreasing numbers of donors, collections, and donated RBC units from white donors over time. Although the US population has diversified, and minority recruitment programs have been implemented, white donors constitute the majority of RBC donors and donations. Focused and effective efforts are needed to increase the proportion of minority donors. © 2017 AABB.

  9. Flow field measurements in the cell culture unit

    Science.gov (United States)

    Walker, Stephen; Wilder, Mike; Dimanlig, Arsenio; Jagger, Justin; Searby, Nancy

    2002-01-01

    The cell culture unit (CCU) is being designed to support cell growth for long-duration life science experiments on the International Space Station (ISS). The CCU is a perfused loop system that provides a fluid environment for controlled cell growth experiments within cell specimen chambers (CSCs), and is intended to accommodate diverse cell specimen types. Many of the functional requirements depend on the fluid flow field within the CSC (e.g., feeding and gas management). A design goal of the CCU is to match, within experimental limits, all environmental conditions, other than the effects of gravity on the cells, whether the hardware is in microgravity ( micro g), normal Earth gravity, or up to 2g on the ISS centrifuge. In order to achieve this goal, two steps are being taken. The first step is to characterize the environmental conditions of current 1g cell biology experiments being performed in laboratories using ground-based hardware. The second step is to ensure that the design of the CCU allows the fluid flow conditions found in 1g to be replicated from microgravity up to 2g. The techniques that are being used to take these steps include flow visualization, particle image velocimetry (PIV), and computational fluid dynamics (CFD). Flow visualization using the injection of dye has been used to gain a global perspective of the characteristics of the CSC flow field. To characterize laboratory cell culture conditions, PIV is being used to determine the flow field parameters of cell suspension cultures grown in Erlenmeyer flasks on orbital shakers. These measured parameters will be compared to PIV measurements in the CSCs to ensure that the flow field that cells encounter in CSCs is within the bounds determined for typical laboratory experiments. Using CFD, a detailed simulation is being developed to predict the flow field within the CSC for a wide variety of flow conditions, including microgravity environments. Results from all these measurements and analyses of the

  10. Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells.

    Science.gov (United States)

    Ahmadi, S M; Campoli, G; Amin Yavari, S; Sajadi, B; Wauthle, R; Schrooten, J; Weinans, H; Zadpoor, A A

    2014-06-01

    Cellular structures with highly controlled micro-architectures are promising materials for orthopedic applications that require bone-substituting biomaterials or implants. The availability of additive manufacturing techniques has enabled manufacturing of biomaterials made of one or multiple types of unit cells. The diamond lattice unit cell is one of the relatively new types of unit cells that are used in manufacturing of regular porous biomaterials. As opposed to many other types of unit cells, there is currently no analytical solution that could be used for prediction of the mechanical properties of cellular structures made of the diamond lattice unit cells. In this paper, we present new analytical solutions and closed-form relationships for predicting the elastic modulus, Poisson׳s ratio, critical buckling load, and yield (plateau) stress of cellular structures made of the diamond lattice unit cell. The mechanical properties predicted using the analytical solutions are compared with those obtained using finite element models. A number of solid and porous titanium (Ti6Al4V) specimens were manufactured using selective laser melting. A series of experiments were then performed to determine the mechanical properties of the matrix material and cellular structures. The experimentally measured mechanical properties were compared with those obtained using analytical solutions and finite element (FE) models. It has been shown that, for small apparent density values, the mechanical properties obtained using analytical and numerical solutions are in agreement with each other and with experimental observations. The properties estimated using an analytical solution based on the Euler-Bernoulli theory markedly deviated from experimental results for large apparent density values. The mechanical properties estimated using FE models and another analytical solution based on the Timoshenko beam theory better matched the experimental observations. Copyright © 2014 Elsevier Ltd

  11. Molten Salt Breeder Reactor Analysis Based on Unit Cell Model

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Yongjin; Choi, Sooyoung; Lee, Deokjung [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

    2014-05-15

    Contemporary computer codes like the MCNP6 or SCALE are only good for solving a fixed solid fuel reactor. However, due to the molten-salt fuel, MSR analysis needs some functions such as online reprocessing and refueling, and circulating fuel. J. J. Power of Oak Ridge National Laboratory (ORNL) suggested in 2013 a method for simulating the Molten Salt Breeder Reactor (MSBR) with SCALE, which does not support continuous material processing. In order to simulate MSR characteristics, the method proposes dividing a depletion time into short time intervals and batchwise reprocessing and refueling at each step. We are applying this method by using the MCNP6 and PYTHON and NEWT-TRITON-PYTHON and PYTHON code systems to MSBR. This paper contains various parameters to analyze the MSBR unit cell model such as the multiplication factor, breeding ratio, change of amount of fuel, amount of fuel feeding, and neutron flux distribution. The result of MCNP6 and NEWT module in SCALE show some difference in depletion analysis, but it still seems that they can be used to analyze MSBR. Using these two computer code system, it is possible to analyze various parameters for the MSBR unit cells such as the multiplication factor, breeding ratio, amount of material, total feeding, and neutron flux distribution. Furthermore, the two code systems will be able to be used for analyzing other MSR model or whole core models of MSR.

  12. Molten Salt Breeder Reactor Analysis Based on Unit Cell Model

    International Nuclear Information System (INIS)

    Jeong, Yongjin; Choi, Sooyoung; Lee, Deokjung

    2014-01-01

    Contemporary computer codes like the MCNP6 or SCALE are only good for solving a fixed solid fuel reactor. However, due to the molten-salt fuel, MSR analysis needs some functions such as online reprocessing and refueling, and circulating fuel. J. J. Power of Oak Ridge National Laboratory (ORNL) suggested in 2013 a method for simulating the Molten Salt Breeder Reactor (MSBR) with SCALE, which does not support continuous material processing. In order to simulate MSR characteristics, the method proposes dividing a depletion time into short time intervals and batchwise reprocessing and refueling at each step. We are applying this method by using the MCNP6 and PYTHON and NEWT-TRITON-PYTHON and PYTHON code systems to MSBR. This paper contains various parameters to analyze the MSBR unit cell model such as the multiplication factor, breeding ratio, change of amount of fuel, amount of fuel feeding, and neutron flux distribution. The result of MCNP6 and NEWT module in SCALE show some difference in depletion analysis, but it still seems that they can be used to analyze MSBR. Using these two computer code system, it is possible to analyze various parameters for the MSBR unit cells such as the multiplication factor, breeding ratio, amount of material, total feeding, and neutron flux distribution. Furthermore, the two code systems will be able to be used for analyzing other MSR model or whole core models of MSR

  13. Hydrogen and fuel cells in the United States Congress

    International Nuclear Information System (INIS)

    Yacobucci, B.D.

    2003-01-01

    Over the past few years, the United States Congress has shown increasing interest in the development of hydrogen fuel and fuel cells for transportation, stationary, and mobile applications The high efficiency of fuel cell systems could address some of the concern over increasing dependence on imported petroleum. Further, lower emissions could help promote air quality goals However, many questions remain, including the affordability, safety, overall fuel-cycle efficiency and emissions. These questions, especially those related to cost, have led Members of Congress to enact legislation to speed the development and commercialization of the technologies. This paper discusses congressional action on hydrogen and fuel cells. It provides an overview of the U.S. Congress, and outlines the role of the appropriations process. It then provides a history of federal hydrogen fuel research and development (R and D), both in terms of legislative and executive initiatives, and it describes pending legislation current as of this writing, including bills on energy policy, transportation policy, tax policy, and appropriations. Finally, the paper presents some of the issues that the pending legislation may raise for industry. (author)

  14. Unit-cell refinement from powder diffraction scans

    International Nuclear Information System (INIS)

    Pawley, G.S.

    1981-01-01

    A procedure for the refinement of the crystal unit cell from a powder diffraction scan is presented. In this procedure knowledge of the crystal structure is not required, and at the end of the refinement a list of indexed intensities is produced. This list may well be usable as the starting point for the application of direct methods. The problems of least-squares ill-conditioning due to overlapping reflections are overcome by constraints. An example using decafluorocyclohexene, C 6 F 10 , shows the quality of fit obtained in a case which may even be a false minimum. The method should become more relevant as powder scans of improved resolution become available, through the use of pulsed neutron sources. (Auth.)

  15. Uncertainty analysis of light water reactor unit fuel pin cells

    Energy Technology Data Exchange (ETDEWEB)

    Kamerow, S.; Ivanov, K., E-mail: sln107@PSU.EDU, E-mail: kni1@PSU.EDU [Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, PA (United States); Moreno, C. Arenas, E-mail: cristina.arenas@UPC.EDU [Department of Physics and Nuclear Engineering, Technical University of Catalonia, Barcelona (Spain)

    2011-07-01

    The study explored the calculation of uncertainty based on available covariance data and computational tools. Uncertainty due to temperature changes and different fuel compositions are the main focus of this analysis. Selected unit fuel pin cells were analyzed according to the OECD LWR UAM benchmark specifications. Criticality and uncertainty analyses were performed using TSUNAMI-1D sequence in SCALE 6.0. It was found that uncertainties increase with increasing temperature while k{sub eff} decreases. This increase in the uncertainty is due to the increase in sensitivity of the largest contributor of uncertainty, namely nuclide reaction {sup 238}U (n, gamma). The sensitivity grew larger as the capture cross-section of {sup 238}U expanded due to Doppler broadening. In addition, three different compositions (UOx, MOx, and UOxGd{sub 2}O{sub 3}) of fuel cells were analyzed. It showed a remarkable increase in uncertainty in k{sub eff} for the case of the MOx fuel cell and UOxGd{sub 2}O{sub 3} fuel cell. The increase in the uncertainty of k{sub eff} in UOxGd{sub 2}O{sub 3} fuel was nearly twice of that in MOx fuel and almost four times the amount in UOx fuel. The components of the uncertainties in k{sub eff} in each case were examined and it was found that the neutron-nuclide reaction of {sup 238}U, mainly (n,n'), contributed the most to the uncertainties in the cases of MOx and UOxGd{sub 2}O{sub 3}. At higher energy, the covariance coefficient matrix of {sup 238}U (n,n') to {sup 238}U (n,n') and {sup 238}U (n,n') cross-section showed very large values. Further, examination of the UOxGd{sub 2}O{sub 3} case found that the {sup 238}U (n,n') became the dominant contributor to the uncertainty because most of the thermal neutrons in the cell were absorbed by Gadolinium in UOxGd{sub 2}O{sub 3} case and thus shifting the neutron spectrum to higher energy. For the MOx case on other hand, {sup 239}Pu has a very strong absorption cross-section at low energy

  16. A Miniaturized Antenna with Negative Index Metamaterial Based on Modified SRR and CLS Unit Cell for UWB Microwave Imaging Applications

    Directory of Open Access Journals (Sweden)

    Md. Moinul Islam

    2015-01-01

    Full Text Available A miniaturized antenna employing a negative index metamaterial with modified split-ring resonator (SRR and capacitance-loaded strip (CLS unit cells is presented for Ultra wideband (UWB microwave imaging applications. Four left-handed (LH metamaterial (MTM unit cells are located along one axis of the antenna as the radiating element. Each left-handed metamaterial unit cell combines a modified split-ring resonator (SRR with a capacitance-loaded strip (CLS to obtain a design architecture that simultaneously exhibits both negative permittivity and negative permeability, which ensures a stable negative refractive index to improve the antenna performance for microwave imaging. The antenna structure, with dimension of 16 × 21 × 1.6 mm3, is printed on a low dielectric FR4 material with a slotted ground plane and a microstrip feed. The measured reflection coefficient demonstrates that this antenna attains 114.5% bandwidth covering the frequency band of 3.4–12.5 GHz for a voltage standing wave ratio of less than 2 with a maximum gain of 5.16 dBi at 10.15 GHz. There is a stable harmony between the simulated and measured results that indicate improved nearly omni-directional radiation characteristics within the operational frequency band. The stable surface current distribution, negative refractive index characteristic, considerable gain and radiation properties make this proposed negative index metamaterial antenna optimal for UWB microwave imaging applications.

  17. Experimental and numerical studies on pressure drop in reverse electrodialysis: Effect of unit cell configuration

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sung Kook; Choi, Kyung Soo [Advanced Combustion Laboratory, Korea Institute of Energy Research, Daejeon (Korea, Republic of); Kim, Chan Soo; Hwang, Kyo Sik; Han, Ji Hyung; Kim, Han Ki; Jeong, Nam Jo [Jeju Global Research Center, Korea Institute of Energy Research, Jeju (Korea, Republic of)

    2016-11-15

    Experimental and numerical studies on pressure drop in Reverse electrodialysis (RED) were performed. In this study, a module with 200 unit cells is considered for the demonstration of bench-scale RED module and two different unit cell configurations are utilized. Pressure drop through the module is measured by varying flow rates. For evaluating the hydrodynamic characteristics in the unit cell, a numerical simulation is also conducted and the simplified method using a porous media model is employed to simulate the channel filled with spacer. Due to the insertion of spacer and narrow channel, great pressure loss occurs along the unit cell. Based on estimated pressure data, high pressure difference between seawater and fresh water channel takes place locally in the unit cell configuration with crossflow direction, leading to a leakage problem through the membrane and finally degradation in the output power. Consequently, it is confirmed that the unit cell configuration is one of the important design parameters in a RED module.

  18. Automated assembling of single fuel cell units for use in a fuel cell stack

    Science.gov (United States)

    Jalba, C. K.; Muminovic, A.; Barz, C.; Nasui, V.

    2017-05-01

    The manufacturing of PEMFC stacks (POLYMER ELEKTROLYT MEMBRAN Fuel Cell) is nowadays still done by hand. Over hundreds of identical single components have to be placed accurate together for the construction of a fuel cell stack. Beside logistic problems, higher total costs and disadvantages in weight the high number of components produce a higher statistic interference because of faulty erection or material defects and summation of manufacturing tolerances. The saving of costs is about 20 - 25 %. Furthermore, the total weight of the fuel cells will be reduced because of a new sealing technology. Overall a one minute cycle time has to be aimed per cell at the manufacturing of these single components. The change of the existing sealing concept to a bonded sealing is one of the important requisites to get an automated manufacturing of single cell units. One of the important steps for an automated gluing process is the checking of the glue application by using of an image processing system. After bonding the single fuel cell the sealing and electrical function can be checked, so that only functional and high qualitative cells can get into further manufacturing processes.

  19. Unit cell parameters of wurtzite InP nanowires determined by x-ray diffraction.

    Science.gov (United States)

    Kriegner, D; Wintersberger, E; Kawaguchi, K; Wallentin, J; Borgström, M T; Stangl, J

    2011-10-21

    High resolution x-ray diffraction is used to study the structural properties of the wurtzite polytype of InP nanowires. Wurtzite InP nanowires are grown by metal-organic vapor phase epitaxy using S-doping. From the evaluation of the Bragg peak position we determine the lattice parameters of the wurtzite InP nanowires. The unit cell dimensions are found to differ from the ones expected from geometric conversion of the cubic bulk InP lattice constant. The atomic distances along the c direction are increased whereas the atomic spacing in the a direction is reduced in comparison to the corresponding distances in the zinc-blende phase. Using core/shell nanowires with a thin core and thick nominally intrinsic shells we are able to determine the lattice parameters of wurtzite InP with a negligible influence of the S-doping due to the much larger volume in the shell. The determined material properties will enable the ab initio calculation of electronic and optical properties of wurtzite InP nanowires.

  20. Super Unit Cells in Aperture-Based Metamaterials

    Directory of Open Access Journals (Sweden)

    Dragan Tanasković

    2015-01-01

    Full Text Available An important class of electromagnetic metamaterials are aperture-based metasurfaces. Examples include extraordinary optical transmission arrays and double fishnets with negative refractive index. We analyze a generalization of such metamaterials where a simple aperture is now replaced by a compound object formed by superposition of two or more primitive objects (e.g., rectangles, circles, and ellipses. Thus obtained “super unit cell” shows far richer behavior than the subobjects that comprise it. We show that nonlocalities introduced by overlapping simple subobjects can be used to produce large deviations of spectral dispersion even for small additive modifications of the basic geometry. Technologically, some super cells may be fabricated by simple spatial shifting of the existing photolithographic masks. In our investigation we applied analytical calculations and ab initio finite element modeling to prove the possibility to tailor the dispersion including resonances for plasmonic nanocomposites by adjusting the local geometry and exploiting localized interactions at a subwavelength level. Any desired form could be defined using simple primitive objects, making the situation a geometrical analog of the case of series expansion of a function. Thus an additional degree of tunability of metamaterials is obtained. The obtained designer structures can be applied in different fields like waveguiding and sensing.

  1. Calcitonin, phosphate, and the osteocyte--osteoblast bone cell unit

    Energy Technology Data Exchange (ETDEWEB)

    Talmage, R.V.; Matthews, J.L.; Martin, J.H.; Kennedy, J.W. III; Davis, W.L.; Roycroft, J.H. Jr.

    1974-01-01

    In this report we have attempted to correlate the morphological and chemical changes that occur in the long bone (tibia) of rats with the hypocalcemia that is produced following calcitonin injection or release from its gland of origin. By varying the supply of phosphate available to the rat, it has been possible to demonstrate that changes produced by CT both in bone and in plasma calcium concentrations were dependent upon an adequate supply of this ion. It is, therefore, postulated that the hypocalcemia produced by calcitonin is secondary to the formation of a calcium phosphate complex in and around osteocytes and lining cells. It is suggested that this complex, which is normally prevented from transforming to apatite crystal by the presence of an inhibitor, reduces the availability of calcium for rapid transport to the ECF. The reduction in calcium flux from bone to ECF results in a rapid and transient hypocalcemia. Regardless of the status of this postulate, we have at least demonstrated that the osteocyte-osteoblast unit of compact bone reacts rapidly to calcitonin in a process requiring phosphate in a sequence of events which can be closely correlated to the hypocalcemic action of the hormone.

  2. Photovoltaic Performance Characterization of Textured Silicon Solar Cells Using Luminescent Down-Shifting Eu-Doped Phosphor Particles of Various Dimensions.

    Science.gov (United States)

    Ho, Wen-Jeng; Deng, Yu-Jie; Liu, Jheng-Jie; Feng, Sheng-Kai; Lin, Jian-Cheng

    2017-01-01

    This paper reports on efforts to enhance the photovoltaic performance of textured silicon solar cells through the application of a layer of Eu-doped silicate phosphor with particles of various dimensions using the spin-on film technique. We examined the surface profile and dimensions of the Eu-doped phosphors in the silicate layer using optical microscopy with J-image software. Optical reflectance, photoluminescence, and external quantum efficiency were used to characterize the luminescent downshifting (LDS) and light scattering of the Eu-doped silicate phosphor layer. Current density-voltage curves under AM 1.5G simulation were used to confirm the contribution of LDS and light scattering produced by phosphor particles of various dimensions. Experiment results reveal that smaller phosphor particles have a more pronounced effect on LDS and a slight shading of incident light. The application of small Eu-doped phosphor particles increased the conversion efficiency by 9.2% (from 12.56% to 13.86%), far exceeding the 5.6% improvement (from 12.54% to 13.32%) achieved by applying a 250 nm layer of SiO₂ and the 4.5% improvement (from 12.37% to 12.98%) observed in cells with large Eu-doped phosphor particles.

  3. Multiplying dimensions

    CERN Multimedia

    2013-01-01

    A few weeks ago, I had a vague notion of what TED was, and how it worked, but now I’m a confirmed fan. It was my privilege to host CERN’s first TEDx event last Friday, and I can honestly say that I can’t remember a time when I was exposed to so much brilliance in such a short time.   TEDxCERN was designed to give a platform to science. That’s why we called it Multiplying Dimensions – a nod towards the work we do here, while pointing to the broader importance of science in society. We had talks ranging from the most subtle pondering on the nature of consciousness to an eighteen year old researcher urging us to be patient, and to learn from our mistakes. We had musical interludes that included encounters between the choirs of local schools and will.i.am, between an Israeli pianist and an Iranian percussionist, and between Grand Opera and high humour. And although I opened the event by announcing it as a day off from physics, we had a quite brill...

  4. Cell size and wall dimensions drive distinct variability of earlywood and latewood density in Northern Hemisphere conifers.

    Science.gov (United States)

    Björklund, Jesper; Seftigen, Kristina; Schweingruber, Fritz; Fonti, Patrick; von Arx, Georg; Bryukhanova, Marina V; Cuny, Henri E; Carrer, Marco; Castagneri, Daniele; Frank, David C

    2017-11-01

    Interannual variability of wood density - an important plant functional trait and environmental proxy - in conifers is poorly understood. We therefore explored the anatomical basis of density. We hypothesized that earlywood density is determined by tracheid size and latewood density by wall dimensions, reflecting their different functional tasks. To determine general patterns of variability, density parameters from 27 species and 349 sites across the Northern Hemisphere were correlated to tree-ring width parameters and local climate. We performed the same analyses with density and width derived from anatomical data comprising two species and eight sites. The contributions of tracheid size and wall dimensions to density were disentangled with sensitivity analyses. Notably, correlations between density and width shifted from negative to positive moving from earlywood to latewood. Temperature responses of density varied intraseasonally in strength and sign. The sensitivity analyses revealed tracheid size as the main determinant of earlywood density, while wall dimensions become more influential for latewood density. Our novel approach of integrating detailed anatomical data with large-scale tree-ring data allowed us to contribute to an improved understanding of interannual variations of conifer growth and to illustrate how conifers balance investments in the competing xylem functions of hydraulics and mechanical support. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

  5. Rhombicuboctahedron unit cell based scaffolds for bone regeneration: geometry optimization with a mechanobiology - driven algorithm.

    Science.gov (United States)

    Boccaccio, Antonio; Fiorentino, Michele; Uva, Antonio E; Laghetti, Luca N; Monno, Giuseppe

    2018-02-01

    In a context more and more oriented towards customized medical solutions, we propose a mechanobiology-driven algorithm to determine the optimal geometry of scaffolds for bone regeneration that is the most suited to specific boundary and loading conditions. In spite of the huge number of articles investigating different unit cells for porous biomaterials, no studies are reported in the literature that optimize the geometric parameters of such unit cells based on mechanobiological criteria. Parametric finite element models of scaffolds with rhombicuboctahedron unit cell were developed and incorporated into an optimization algorithm that combines them with a computational mechanobiological model. The algorithm perturbs iteratively the geometry of the unit cell until the best scaffold geometry is identified, i.e. the geometry that allows to maximize the formation of bone. Performances of scaffolds with rhombicuboctahedron unit cell were compared with those of other scaffolds with hexahedron unit cells. We found that scaffolds with rhombicuboctahedron unit cell are particularly suited for supporting medium-low loads, while, for higher loads, scaffolds with hexahedron unit cells are preferable. The proposed algorithm can guide the orthopaedic/surgeon in the choice of the best scaffold to be implanted in a patient-specific anatomic region. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. A cellular Potts model for the MMP-dependent and -independent cancer cell migration in matrix microtracks of different dimensions

    Science.gov (United States)

    Scianna, Marco; Preziosi, Luigi

    2014-03-01

    Cell migration is fundamental in a wide variety of physiological and pathological phenomena, among other in cancer invasion and development. In particular, the migratory/invasive capability of single metastatic cells is fundamental in determining the malignancy of a solid tumor. Specific cell migration phenotypes result for instance from the reciprocal interplay between the biophysical and biochemical properties of both the malignant cells themselves and of the surrounding environment. In particular, the extracellular matrices (ECMs) forming connective tissues can provide both loosely organized zones and densely packed barriers, which may impact cell invasion mode and efficiency. The critical processes involved in cell movement within confined spaces are (i) the proteolytic activity of matrix metalloproteinases (MMPs) and (ii) the deformation of the entire cell body, and in particular of the nucleus. We here present an extended cellular Potts model (CPM) to simulate a bio-engineered matrix system, which tests the active motile behavior of a single cancer cell into narrow channels of different widths. As distinct features of our approach, the cell is modeled as a compartmentalized discrete element, differentiated in the nucleus and in the cytosolic region, while a directional shape-dependent movement is explicitly driven by the evolution of its polarity vector. As outcomes, we find that, in a large track, the tumor cell is not able to maintain a directional movement. On the contrary, a structure of subcellular width behaves as a contact guidance sustaining cell persistent locomotion. In particular, a MMP-deprived cell is able to repolarize and follow the micropattern geometry, while a full MMP activity leads to a secondary track expansion by degrading the matrix structure. Finally, we confirm that cell movement within a subnuclear structure can be achieved either by pericellular proteolysis or by a significant deformation of cell nucleus.

  7. Analysis of long-time operation of micro-cogeneration unit with fuel cell

    Directory of Open Access Journals (Sweden)

    Patsch Marek

    2015-01-01

    Full Text Available Micro-cogeneration is cogeneration with small performance, with maximal electric power up to 50 kWe. On the present, there are available small micro-cogeneration units with small electric performance, about 1 kWe, which are usable also in single family houses or flats. These micro-cogeneration units operate on principle of conventional combustion engine, Stirling engine, steam engine or fuel cell. Micro-cogeneration units with fuel cells are new progressive developing type of units for single family houses. Fuel cell is electrochemical device which by oxidation-reduction reaction turn directly chemical energy of fuel to electric power, secondary products are pure water and thermal energy. The aim of paper is measuring and evaluation of operation parameters of micro-cogeneration unit with fuel cell which uses natural gas as a fuel.

  8. Hydrogen Fuel Cell Performance as Telecommunications Backup Power in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Saur, Genevieve [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sprik, Sam [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-03-01

    Working in collaboration with the U.S. Department of Energy (DOE) and industry project partners, the National Renewable Energy Laboratory (NREL) acts as the central data repository for the data collected from real-world operation of fuel cell backup power systems. With American Recovery and Reinvestment Act of 2009 (ARRA) co-funding awarded through DOE's Fuel Cell Technologies Office, more than 1,300 fuel cell units were deployed over a three-plus-year period in stationary, material handling equipment, auxiliary power, and backup power applications. This surpassed a Fuel Cell Technologies Office ARRA objective to spur commercialization of an early market technology by installing 1,000 fuel cell units across several different applications, including backup power. By December 2013, 852 backup power units out of 1,330 fuel cell units deployed were providing backup service, mainly for telecommunications towers. For 136 of the fuel cell backup units, project participants provided detailed operational data to the National Fuel Cell Technology Evaluation Center for analysis by NREL's technology validation team. NREL analyzed operational data collected from these government co-funded demonstration projects to characterize key fuel cell backup power performance metrics, including reliability and operation trends, and to highlight the business case for using fuel cells in these early market applications. NREL's analyses include these critical metrics, along with deployment, U.S. grid outage statistics, and infrastructure operation.

  9. Radial variation of basic density and wood cells dimensions of Cariniana legalis (Mart. O. Kuntze depending on the provenance

    Directory of Open Access Journals (Sweden)

    Israel Luiz de Lima

    2011-12-01

    Full Text Available Provenance tests can provide information about the silvicultural behavior and wood quality for the exploration of variability and conservation of genetic material for future use. This study aims to investigate the effect of provenances on some wood properties of the Cariniana legalis. Seedlings of three provenances (Porto Ferreira, Piracicaba and Campinas were planted in Luiz Antonio-SP using randomized block design with six replicates. After 26 years of planting, eighteen trees, six of each provenance, were felled. The properties studied were basic density and the cellular dimensions. The results revealed that the basic density, fiber length, fiber wall thickness, vessel element length, vessel diameter, uniseriate ray height and width were influenced by the provenances. A good positive relationship was found among the fiber length, fiber wall thickness, vessel element length; vessel diameter and multiseriate ray height with radial position and a negative relation between vessel frequency with the radial position.

  10. Empirical Derivation of Correction Factors for Human Spiral Ganglion Cell Nucleus and Nucleolus Count Units.

    Science.gov (United States)

    Robert, Mark E; Linthicum, Fred H

    2016-01-01

    Profile count method for estimating cell number in sectioned tissue applies a correction factor for double count (resulting from transection during sectioning) of count units selected to represent the cell. For human spiral ganglion cell counts, we attempted to address apparent confusion between published correction factors for nucleus and nucleolus count units that are identical despite the role of count unit diameter in a commonly used correction factor formula. We examined a portion of human cochlea to empirically derive correction factors for the 2 count units, using 3-dimensional reconstruction software to identify double counts. The Neurotology and House Histological Temporal Bone Laboratory at University of California at Los Angeles. Using a fully sectioned and stained human temporal bone, we identified and generated digital images of sections of the modiolar region of the lower first turn of cochlea, identified count units with a light microscope, labeled them on corresponding digital sections, and used 3-dimensional reconstruction software to identify double-counted count units. For 25 consecutive sections, we determined that double-count correction factors for nucleus count unit (0.91) and nucleolus count unit (0.92) matched the published factors. We discovered that nuclei and, therefore, spiral ganglion cells were undercounted by 6.3% when using nucleolus count units. We determined that correction factors for count units must include an element for undercounting spiral ganglion cells as well as the double-count element. We recommend a correction factor of 0.91 for the nucleus count unit and 0.98 for the nucleolus count unit when using 20-µm sections. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2015.

  11. Silica-Assisted Nucleation of Polymer Foam Cells with Nanoscopic Dimensions: Impact of Particle Size, Line Tension, and Surface Functionality.

    Science.gov (United States)

    Liu, Shanqiu; Eijkelenkamp, Rik; Duvigneau, Joost; Vancso, G Julius

    2017-11-01

    Core-shell nanoparticles consisting of silica as core and surface-grafted poly(dimethylsiloxane) (PDMS) as shell with different diameters were prepared and used as heterogeneous nucleation agents to obtain CO 2 -blown poly(methyl methacrylate) (PMMA) nanocomposite foams. PDMS was selected as the shell material as it possesses a low surface energy and high CO 2 -philicity. The successful synthesis of core-shell nanoparticles was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy. The cell size and cell density of the PMMA micro- and nanocellular materials were determined by scanning electron microscopy. The cell nucleation efficiency using core-shell nanoparticles was significantly enhanced when compared to that of unmodified silica. The highest nucleation efficiency observed had a value of ∼0.5 for nanoparticles with a core diameter of 80 nm. The particle size dependence of cell nucleation efficiency is discussed taking into account line tension effects. Complete engulfment by the polymer matrix of particles with a core diameter below 40 nm at the cell wall interface was observed corresponding to line tension values of approximately 0.42 nN. This line tension significantly increases the energy barrier of heterogeneous nucleation and thus reduces the nucleation efficiency. The increase of the CO 2 saturation pressure to 300 bar prior to batch foaming resulted in an increased line tension length. We observed a decrease of the heterogeneous nucleation efficiency for foaming after saturation with CO 2 at 300 bar, which we attribute to homogenous nucleation becoming more favorable at the expense of heterogeneous nucleation in this case. Overall, it is shown that the contribution of line tension to the free energy barrier of heterogeneous foam cell nucleation must be considered to understand foaming of viscoelastic materials. This finding emphasizes the need for new strategies including the use of

  12. An Analysis of Environmental Dimensions Affected in Adoption of Hydrogen Fuel Cell Vehicles: A Study in Shah ALAM Industrial AREA, Selangor

    Directory of Open Access Journals (Sweden)

    Siron Rusinah

    2016-01-01

    Full Text Available The aim of the study is to identify the perceptions of respondents on environmental dimensions hat affected in adoption of hydrogen fuel cell vehicles. The study was conducted at Shah Alam industrial areas of Selangor, Malaysia, with the number of respondents are 120 respondents with various job positions that related with engineering and automobiles industry. The findings of the research shows that the dimensions of HFCV Internal Environmental total score of the items statement is 3.40 with the percentage of agreement in implementation is 3.72 percent, HFCV Environmental Information Systems shows that the total score of the items statement is 3.63 with the percentage of agreement on use to great extend is 42.5 percent, HFCV Cooperation with Customers shows that the total score of the items statement is 3.81 with the percentage of agreement on implementation is 44.2 percent. The findings on HFCV Eco Design shows that the total score of items statement is 4.02 with the percentage of agreement on implementation is 42.3 percent, HFCV Environmental Organizational Culture shows that the total score of the items statement is 3.37 with the percentage of agreement is 34.2 percent, HFCV Environmental Leadership shows that the total score of the items statement is 3.34 with the percentage of agreement is 48.2 percent. HFCV Proactive Green Innovation shows that the total score of items statement is 4.10 ahead of automobile got the highest mean score of 4.32 with the percentage of agreement is 41 percent. HFCV Environmental performance shows that the total score of the items statement is 3.87 with the percentage of agreement is 39 percent and the last environmental dimensions was HFCV Environmental Risks shows that the total score of the item statement is 4.00 with the percentage of agreement is 40 percent

  13. Development of batch electrolytic enrichment cells with 100-fold volume reduction, control electronic units and neutralization/distillation unit, to enable better sensitivity to be achieved in low-level tritium measurements when liquid scintillation counting follows the enrichment process

    International Nuclear Information System (INIS)

    Taylor, C.B.

    1980-06-01

    Full details of the batch-cell tritium enrichment system design are provided including electronic control circuits specially developed for these cells. The system incorporates a new type of concentric electrode cell (outer cathode of mild steel, anode of stainless steel, inner cathode of mild steel) with volume reduction capability 1 l to ca 9 ml. Electrolysis of 20 cells is performed in 2 steps. Down to sample volume ca 20 ml, the cells are series connected at constant currents up to 14.5 A, in the 2nd step, each cell is connected to its own individual current supply (2A) and control circuit. Automatic shut-off at the desired final volume is achieved by sensing the drop in current through the inner cathode as the electrolyte level falls below a PTFE insulator. The large electrode surface area and careful dimensioning at the foot of the cell allow operation with low starting electrolyte concentration 1.5 g Na 2 O 2 .l -1 . After electrolysis, quantitative recovery as distilled water of all hydrogen from the enriched residue is achieved by CO 2 -neutralisation and vacuum distillation at 100 0 C in a distillation unit which handles 20 cells simultaneously

  14. TRICE - A program for reconstructing 3D reciprocal space and determining unit-cell parameters

    International Nuclear Information System (INIS)

    Zou Xiaodong; Hovmoeller, Anders; Hovmoeller, Sven

    2004-01-01

    A program system-Trice-for reconstructing the 3D reciprocal lattice from an electron diffraction tilt series is described. The unit-cell parameters can be determined from electron diffraction patterns directly by Trice. The unit cell can be checked and the lattice type and crystal system can be determined from the 3D reciprocal lattice. Trice can be applied to all crystal systems and lattice types

  15. The Daniell Cell, Ohm's Law and the Emergence of the International System of Units

    OpenAIRE

    Jayson, Joel S.

    2015-01-01

    Telegraphy originated in the 1830s and 40s and flourished in the following decades, but with a patchwork of electrical standards. Electromotive force was for the most part measured in units of the predominant Daniell cell. Each company had their own resistance standard. In 1862 the British Association for the Advancement of Science formed a committee to address this situation. By 1873 they had given definition to the electromagnetic system of units (emu) and defined the practical units of the...

  16. Human Embryonic and Hepatic Stem Cell Differentiation Visualized in Two and Three Dimensions Based on Serial Sections

    DEFF Research Database (Denmark)

    Vestentoft, Peter S.; Brøchner, Christian B; Lynnerup, Niels

    2015-01-01

    ESC colony, and prepare 3-5 μm thick serial sections. Immunohistochemistry applied to individual sections produces a 2-dimensional survey of the developing hESC colony. Based on serial paraffin sections of the 2D-expression pattern, a new and useful 3D-visualization can be modeled. The actual 3D rendering...... visualization of hESC colonies and stem cells in organs, which leads to new insights into and information about the interaction of stem cells with their surroundings....

  17. Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell

    DEFF Research Database (Denmark)

    Jespersen, Jesper Lebæk; Schaltz, Erik; Kær, Søren Knudsen

    2009-01-01

    This work constitutes detailed EIS (Electrochemical Impedance Spectroscopy) measurements on a PBIbased HT-PEM unit cell. By means of EIS the fuel cell is characterized in several modes of operation by varying the current density, temperature and the stoichiometry of the reactant gases. Using...

  18. Quasi bound states in the continuum with few unit cells of photonic crystal slab

    DEFF Research Database (Denmark)

    Taghizadeh, Alireza; Chung, Il-Sug

    2017-01-01

    cell structures. They are explained by a viewpoint of BICs originating from the tight-binding of individual resonances of each unit cell as in semiconductors. Combined with a reciprocal-space matching technique, the microcavities based on quasi-BICs can achieve a Q-factor as high as defect-based Ph...

  19. Storage characteristics of multiple-donor pooled red blood cells compared to single-donor red blood cell units.

    Science.gov (United States)

    Mathur, Aabhas; Chowdhury, Raquibul; Hillyer, Christopher D; Mitchell, W Beau; Shaz, Beth H

    2016-12-01

    Each unit of blood donated is processed and stored individually resulting in variability in the amount of red blood cells (RBCs) collected, RBC properties, and the 24-hour posttransfusion RBC survivability. As a result, each unit differs in its ability to deliver oxygen and potentially its effects on the recipient. The goal of this study was to investigate the storage of pooled RBCs from multiple donors in comparison to control standard RBC units. Two units of irradiated, leukoreduced RBCs of same ABO, D, E, C, and K antigen phenotype were collected from each of five donors using apheresis. One unit from each donor was pooled in a 2-L bag and remaining units were used as controls. After being pooled, RBCs were separated in five bags and stored at 4°C along with the controls. Quality indexes were measured on Days 2, 14, and 28 for all the units. Adenosine triphosphate assays for both pooled and controls showed a slight decrease from Day 2 to Day 28 (pooled/control from 5.22/5.24 to 4.35/4.33 µmol/g hemoglobin [Hb]). 2,3-Diphosphoglycerate was successfully rejuvenated for all RBC units on Day 28 (pooled 11.46 µmol/g Hb; control 11.86 µmol/g Hb). The results showed a nonsignificant difference between pooled and control units, with a general trend of lower standard deviation for pooled units when compared to controls. Pooled units have reduced unit-to-unit variability. Future exploration of their immunogenicity is required before using pooled units for transfusion. © 2016 AABB.

  20. International stem cell collaboration: how disparate policies between the United States and the United Kingdom impact research.

    Science.gov (United States)

    Luo, Jingyuan; Flynn, Jesse M; Solnick, Rachel E; Ecklund, Elaine Howard; Matthews, Kirstin R W

    2011-03-08

    As the scientific community globalizes, it is increasingly important to understand the effects of international collaboration on the quality and quantity of research produced. While it is generally assumed that international collaboration enhances the quality of research, this phenomenon is not well examined. Stem cell research is unique in that it is both politically charged and a research area that often generates international collaborations, making it an ideal case through which to examine international collaborations. Furthermore, with promising medical applications, the research area is dynamic and responsive to a globalizing science environment. Thus, studying international collaborations in stem cell research elucidates the role of existing international networks in promoting quality research, as well as the effects that disparate national policies might have on research. This study examined the impact of collaboration on publication significance in the United States and the United Kingdom, world leaders in stem cell research with disparate policies. We reviewed publications by US and UK authors from 2008, along with their citation rates and the political factors that may have contributed to the number of international collaborations. The data demonstrated that international collaborations significantly increased an article's impact for UK and US investigators. While this applied to UK authors whether they were corresponding or secondary, this effect was most significant for US authors who were corresponding authors. While the UK exhibited a higher proportion of international publications than the US, this difference was consistent with overall trends in international scientific collaboration. The findings suggested that national stem cell policy differences and regulatory mechanisms driving international stem cell research in the US and UK did not affect the frequency of international collaborations, or even the countries with which the US and UK most

  1. Incommensurate crystallography without additional dimensions.

    Science.gov (United States)

    Kocian, Philippe

    2013-07-01

    It is shown that the Euclidean group of translations, when treated as a Lie group, generates translations not only in Euclidean space but on any space, curved or not. Translations are then not necessarily vectors (straight lines); they can be any curve compatible with the parameterization of the considered space. In particular, attention is drawn to the fact that one and only one finite and free module of the Lie algebra of the group of translations can generate both modulated and non-modulated lattices, the modulated character being given only by the parameterization of the space in which the lattice is generated. Moreover, it is shown that the diffraction pattern of a structure is directly linked to the action of that free and finite module. In the Fourier transform of a whole structure, the Fourier transform of the electron density of one unit cell (i.e. the structure factor) appears concretely, whether the structure is modulated or not. Thus, there exists a neat separation: the geometrical aspect on the one hand and the action of the group on the other, without requiring additional dimensions.

  2. Importance of unit cells in accurate evaluation of the characteristics of graphene

    Energy Technology Data Exchange (ETDEWEB)

    Sabzyan, Hassan; Sadeghpour, Narges [Isfahan Univ. (Iran, Islamic Republic of). Dept. of Chemistry

    2016-08-01

    Effects of the size of the unit cell on energy, atomic charges, and phonon frequencies of graphene at the Γ point of the Brillouin zone are studied in the absence and presence of an electric field using density functional theory (DFT) methods (LDA and DFT-PBE functionals with Goedecker-Teter-Hutter (GTH) and Troullier-Martins (TM) norm-conserving pseudopotentials). Two types of unit cells containing n{sub c}=4-28 carbon atoms are considered. Results show that stability of graphene increases with increasing size of the unit cell. Energy, atomic charges, and phonon frequencies all converge above n{sub c}=24 for all functional-pseudopotentials used. Except for the LDA-GTH calculations, application of an electric field of 0.4 and 0.9 V/nm strengths does not change the trends with the size of the unit cell but instead slightly decreases the binding energy of graphene. Results of this study show that the choice of unit cell size and type is critical for calculation of reliable characteristics of graphene.

  3. The Daniell cell, Ohm's law, and the emergence of the International System of Units

    Science.gov (United States)

    Jayson, Joel S.

    2014-01-01

    Telegraphy originated in the 1830s and 40 s and flourished in the following decades but with a patchwork of electrical standards. Electromotive force was for the most part measured in units of the predominant Daniell cell, but each telegraphy company had their own resistance standard. In 1862, the British Association for the Advancement of Science formed a committee to address this situation. By 1873, they had given definition to the electromagnetic system of units (emu) and defined the practical units of the ohm as 109 emu units of resistance and the volt as 108 emu units of electromotive force. These recommendations were ratified and expanded upon in a series of international congresses held between 1881 and 1904. A proposal by Giovanni Giorgi in 1901 took advantage of a coincidence between the conversion of the units of energy in the emu system (the erg) and in the practical system (the Joule). As it was, the same conversion factor existed between the cgs based emu system and a theretofore undefined MKS system. By introducing another unit X (where X could be any of the practical electrical units), Giorgi demonstrated that a self-consistent MKSX system was tenable without the need for multiplying factors. Ultimately, the ampere was selected as the fourth unit. It took nearly 60 years, but in 1960, Giorgi's proposal was incorporated as the core of the newly inaugurated International System of Units (SI). This article surveys the physics, physicists, and events that contributed to those developments.

  4. On the dimension of Archimedean solids

    Directory of Open Access Journals (Sweden)

    Tomáš Madaras

    2014-01-01

    Full Text Available We study the dimension of graphs of the Archimedean solids. For most of these graphs we find the exact value of their dimension by finding unit-distance embeddings in the euclidean plane or by proving that such an embedding is not possible.

  5. Oxygen transfer properties and dimensions of red blood cells in high-altitude camelids, dromedary camel and goat.

    Science.gov (United States)

    Yamaguchi, K; Jürgens, K D; Bartels, H; Piiper, J

    1987-01-01

    To estimate the advantage of the small red blood cells (RBC) of high-altitude camelids for O2 transfer, the kinetics of O2 uptake into and release from the RBC obtained from llama, vicuña and alpaca were investigated at 37 degrees C with a stopped-flow technique. O2 transfer conductance of RBC (G) was estimated from the rate of O2 saturation change and the corresponding O2 pressure difference between medium and hemoglobin. For comparison, O2 kinetics for the RBC of a low-altitude camelid (dromedary camel) and the pygmy goat were determined and previously measured values for human RBC were used. O2 transfer of RBC was found to be strongly influenced by extracellular diffusion, except with O2 release into dithionite solutions of sufficiently high concentration (greater than 30 mM). The G values measured in these 'standard' conditions, Gst (in mmol X min-1 X Torr-1 X (ml RBC)-1) were: high-altitude camelids, 0.58 (averaged for llama, alpaca and vicuña since there were no significant interspecific differences); camel 0.42; goat, 0.42; man, 0.39. The differences can in part be attributed to expected effects of the size and shape of the RBC (volume, surface area, mean thickness), as well as to the intracellular O2 diffusivity which depends on the concentration of cellular hemoglobin. The high Gst of RBC of high-altitude camelids may be considered to enhance O2 transfer in lungs and tissues. But the O2 transfer conductance of blood, theta, equal to Gst multiplied by hematocrit (in mmol X min-1 X Torr-1 X (ml blood)-1), was only slightly higher as compared to other species: 0.20 (llama, alpaca, vicuña), 0.14 (camel), 0.18 (goat), 0.17 (man).

  6. Using stochastic cell division and death to probe minimal units of cellular replication

    Science.gov (United States)

    Chib, Savita; Das, Suman; Venkatesan, Soumya; Sai Narain Seshasayee, Aswin; Thattai, Mukund

    2018-03-01

    The invariant cell initiation mass measured in bacterial growth experiments has been interpreted as a minimal unit of cellular replication. Here we argue that the existence of such minimal units induces a coupling between the rates of stochastic cell division and death. To probe this coupling we tracked live and dead cells in Escherichia coli populations treated with a ribosome-targeting antibiotic. We find that the growth exponent from macroscopic cell growth or decay measurements can be represented as the difference of microscopic first-order cell division and death rates. The boundary between cell growth and decay, at which the number of live cells remains constant over time, occurs at the minimal inhibitory concentration (MIC) of the antibiotic. This state appears macroscopically static but is microscopically dynamic: division and death rates exactly cancel at MIC but each is remarkably high, reaching 60% of the antibiotic-free division rate. A stochastic model of cells as collections of minimal replicating units we term ‘widgets’ reproduces both steady-state and transient features of our experiments. Sub-cellular fluctuations of widget numbers stochastically drive each new daughter cell to one of two alternate fates, division or death. First-order division or death rates emerge as eigenvalues of a stationary Markov process, and can be expressed in terms of the widget’s molecular properties. High division and death rates at MIC arise due to low mean and high relative fluctuations of widget number. Isolating cells at the threshold of irreversible death might allow molecular characterization of this minimal replication unit.

  7. Evaluation of the impact of banking umbilical cord blood units with high cell dose for ethnically diverse patients.

    Science.gov (United States)

    Stritesky, Gretta; Wadsworth, Kimberly; Duffy, Merry; Buck, Kelly; Dehn, Jason

    2018-02-01

    Umbilical cord blood units provide an important stem cell source for transplantation, particularly for patients of ethnic diversity who may not have suitably matched available, adult-unrelated donors. However, with the cost of cord blood unit acquisition from public banks significantly higher than that for adult-unrelated donors, attention is focused on decreasing cost yet still providing cord blood units to patients in need. Historical practices of banking units with low total nucleated cell counts, including units with approximately 90 × 10 7 total nucleated cells, indicates that most banked cord blood units have much lower total nucleated cell counts than are required for transplant. The objective of this study was to determine the impact on the ability to identify suitable cord blood units for transplantation if the minimum total nucleated cell count for banking were increased from 90 × 10 7 to 124 or 149 × 10 7 . We analyzed ethnically diverse patients (median age, 3 years) who underwent transplantation of a single cord blood unit in 2005 to 2016. A cord blood unit search was evaluated to identify units with equal or greater human leukocyte antigen matching and a greater total nucleated cell count than that of the transplanted cord blood unit (the replacement cord blood unit). If the minimum total nucleated cell count for banking increased to 124 or 149 × 10 7 , then from 75 to 80% of patients would still have at least 1 replacement cord blood unit in the current (2016) cord blood unit inventory. The best replacement cord blood units were often found among cords with the same ethnic background as the patient. The current data suggest that, if the minimum total nucleated cell count were increased for banking, then it would likely lead to an inventory of more desirable cord blood units while having minimal impact on the identification of suitable cord blood units for transplantation. © 2017 AABB.

  8. Culture of human cells in experimental units for spaceflight impacts on their behavior.

    Science.gov (United States)

    Cazzaniga, Alessandra; Moscheni, Claudia; Maier, Jeanette Am; Castiglioni, Sara

    2017-05-01

    Because space missions produce pathophysiological alterations such as cardiovascular disorders and bone demineralization which are very common on Earth, biomedical research in space is a frontier that holds important promises not only to counterbalance space-associated disorders in astronauts but also to ameliorate the health of Earth-bound population. Experiments in space are complex to design. Cells must be cultured in closed cell culture systems (from now defined experimental units (EUs)), which are biocompatible, functional, safe to minimize any potential hazard to the crew, and with a high degree of automation. Therefore, to perform experiments in orbit, it is relevant to know how closely culture in the EUs reflects cellular behavior under normal growth conditions. We compared the performances in these units of three different human cell types, which were recently space flown, i.e. bone mesenchymal stem cells, micro- and macrovascular endothelial cells. Endothelial cells are only slightly and transiently affected by culture in the EUs, whereas these devices accelerate mesenchymal stem cell reprogramming toward osteogenic differentiation, in part by increasing the amounts of reactive oxygen species. We conclude that cell culture conditions in the EUs do not exactly mimic what happens in a culture dish and that more efforts are necessary to optimize these devices for biomedical experiments in space. Impact statement Cell cultures represent valuable preclinical models to decipher pathogenic circuitries. This is true also for biomedical research in space. A lot has been learnt about cell adaptation and reaction from the experiments performed on many different cell types flown to space. Obviously, cell culture in space has to meet specific requirements for the safety of the crew and to comply with the unique environmental challenges. For these reasons, specific devices for cell culture in space have been developed. It is important to clarify whether these

  9. A simplistic analytical unit cell based model for the effective thermal conductivity of high porosity open-cell metal foams

    International Nuclear Information System (INIS)

    Yang, X H; Kuang, J J; Lu, T J; Han, F S; Kim, T

    2013-01-01

    We present a simplistic yet accurate analytical model for the effective thermal conductivity of high porosity open-cell metal foams saturated in a low conducting fluid (air). The model is derived analytically based on a realistic representative unit cell (a tetrakaidecahedron) under the assumption of one-dimensional heat conduction along highly tortuous-conducting ligaments at high porosity ranges (ε ⩾ 0.9). Good agreement with existing experimental data suggests that heat conduction along highly conducting and tortuous ligaments predominantly defines the effective thermal conductivity of open-cell metal foams with negligible conduction in parallel through the fluid phase. (paper)

  10. Replacement of the moderator cell unit of JRR-3's cold neutron source facility

    International Nuclear Information System (INIS)

    Hazawa, Tomoya; Nagahori, Kazuhisa; Kusunoki, Tsuyoshi

    2006-10-01

    The moderator cell of the JRR-3's cold neutron source (CNS) facility, converts thermal neutrons into cold neutrons by passing through liquid cold hydrogen. The cold neutrons are used for material and life science research such as the neutron scattering. The CNS has been operated since the start of JRR-3's in 1990. The moderator cell containing liquid hydrogen is made of stainless steel. The material irradiation lifetime is limited to 7 years due to irradiation brittleness. The first replacement was done by using a spare part made in France. This replacement work of 2006 was carried out by using the domestic moderator cell unit. The following technologies were developed for the moderator cell unit production. 1) Technical development of black treatment on moderator cell surface to increase radiation heat. 2) Development of bending technology of concentric triple tubes consisting from inside tube, Outside tube and Vacuum insulation tube. 3) Development of manufacturing technique of the moderator cell with complicated shapes. According to detail planed work procedures, replacement work was carried out. As results, the working days were reduced to 80% of old ones. The radiation dose was also reduced due to reduction of working days. It was verified by measurement of neutrons characteristics that the replaced moderator cell has the same performance as that of the old moderator cell. The domestic manufacturing of the moderator cell was succeeded. As results, the replacement cost was reduced by development of domestic production technology. (author)

  11. DIFFERENT DIMENSIONS OF TEAMS

    OpenAIRE

    Goparaju Purna SUDHAKAR

    2013-01-01

    Popularity of teams is growing in 21st Century. Organizations are getting their work done through different types of teams. Teams have proved that the collective performance is more than the sum of the individual performances. Thus, the teams have got different dimensions such as quantitative dimensions and qualitative dimensions. The Quantitative dimensions of teams such as team performance, team productivity, team innovation, team effectiveness, team efficiency, team decision making and tea...

  12. 40 CFR Appendix A to Part 76 - Phase I Affected Coal-Fired Utility Units With Group 1 or Cell Burner Boilers

    Science.gov (United States)

    2010-07-01

    ... Units With Group 1 or Cell Burner Boilers A Appendix A to Part 76 Protection of Environment... 1 or Cell Burner Boilers Table 1—Phase I Tangentially Fired Units State Plant Unit Operator ALABAMA... Vertically fired boiler. 2 Arch-fired boiler. Table 3—Phase I Cell Burner Technology Units State Plant Unit...

  13. Dimension of chaotic attractors

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, J.D.; Ott, E.; Yorke, J.A.

    1982-09-01

    Dimension is perhaps the most basic property of an attractor. In this paper we discuss a variety of different definitions of dimension, compute their values for a typical example, and review previous work on the dimension of chaotic attractors. The relevant definitions of dimension are of two general types, those that depend only on metric properties, and those that depend on probabilistic properties (that is, they depend on the frequency with which a typical trajectory visits different regions of the attractor). Both our example and the previous work that we review support the conclusion that all of the probabilistic dimensions take on the same value, which we call the dimension of the natural measure, and all of the metric dimensions take on a common value, which we call the fractal dimension. Furthermore, the dimension of the natural measure is typically equal to the Lyapunov dimension, which is defined in terms of Lyapunov numbers, and thus is usually far easier to calculate than any other definition. Because it is computable and more physically relevant, we feel that the dimension of the natural measure is more important than the fractal dimension.

  14. Fuel Cells in Distributed Power Market Applications in the United States

    International Nuclear Information System (INIS)

    Rastler, D.

    2002-01-01

    This paper reviews results from EPRI market analysis, which examined the technical and economic market potential of fuel cells in distributed power markets in the United States. A methodology and approach for developing realistic quantitative estimates of market potential in competitive electricity markets is presented. Market size estimates for phosphoric acid, polymer exchange membrane, high temperature fuel cells (carbonate and solid oxide systems) and ultra-high efficient fuel cell hybrids are estimated. Market potentials are reviewed for fuel cells systems ranging in size from 3 kW up to 20-30 MW in scale and underlying assumptions are provided. The results and implications are discussed in relation to the changing U.S. electric utility market structures. Results will be of value to energy companies and to fuel cell developers seeking to understand revenue sales estimates, market size, and most profitable segments for fuel cells in the competitive US electric markets. (author)

  15. Infrapatellar fat pad-derived stem cells maintain their chondrogenic capacity in disease and can be used to engineer cartilaginous grafts of clinically relevant dimensions.

    Science.gov (United States)

    Liu, Yurong; Buckley, Conor Timothy; Almeida, Henrique V; Mulhall, Kevin J; Kelly, Daniel John

    2014-11-01

    A therapy for regenerating large cartilaginous lesions within the articular surface of osteoarthritic joints remains elusive. While tissue engineering strategies such as matrix-assisted autologous chondrocyte implantation can be used in the repair of focal cartilage defects, extending such approaches to the treatment of osteoarthritis will require a number of scientific and technical challenges to be overcome. These include the identification of an abundant source of chondroprogenitor cells that maintain their chondrogenic capacity in disease, as well as the development of novel approaches to engineer scalable cartilaginous grafts that could be used to resurface large areas of damaged joints. In this study, it is first demonstrated that infrapatellar fat pad-derived stem cells (FPSCs) isolated from osteoarthritic (OA) donors possess a comparable chondrogenic capacity to FPSCs isolated from patients undergoing ligament reconstruction. In a further validation of their functionality, we also demonstrate that FPSCs from OA donors respond to the application of physiological levels of cyclic hydrostatic pressure by increasing aggrecan gene expression and the production of sulfated glycosaminoglycans. We next explored whether cartilaginous grafts could be engineered with diseased human FPSCs using a self-assembly or scaffold-free approach. After examining a range of culture conditions, it was found that continuous supplementation with both transforming growth factor-β3 (TGF-β3) and bone morphogenic protein-6 (BMP-6) promoted the development of tissues rich in proteoglycans and type II collagen. The final phase of the study sought to scale-up this approach to engineer cartilaginous grafts of clinically relevant dimensions (≥2 cm in diameter) by assembling FPSCs onto electrospun PLLA fiber membranes. Over 6 weeks in culture, it was possible to generate robust, flexible cartilage-like grafts of scale, opening up the possibility that tissues engineered using FPSCs

  16. Improved reproducibility of unit-cell parameters in macromolecular cryocrystallography by limiting dehydration during crystal mounting.

    Science.gov (United States)

    Farley, Christopher; Burks, Geoffry; Siegert, Thomas; Juers, Douglas H

    2014-08-01

    In macromolecular cryocrystallography unit-cell parameters can have low reproducibility, limiting the effectiveness of combining data sets from multiple crystals and inhibiting the development of defined repeatable cooling protocols. Here, potential sources of unit-cell variation are investigated and crystal dehydration during loop-mounting is found to be an important factor. The amount of water lost by the unit cell depends on the crystal size, the loop size, the ambient relative humidity and the transfer distance to the cooling medium. To limit water loss during crystal mounting, a threefold strategy has been implemented. Firstly, crystal manipulations are performed in a humid environment similar to the humidity of the crystal-growth or soaking solution. Secondly, the looped crystal is transferred to a vial containing a small amount of the crystal soaking solution. Upon loop transfer, the vial is sealed, which allows transport of the crystal at its equilibrated humidity. Thirdly, the crystal loop is directly mounted from the vial into the cold gas stream. This strategy minimizes the exposure of the crystal to relatively low humidity ambient air, improves the reproducibility of low-temperature unit-cell parameters and offers some new approaches to crystal handling and cryoprotection.

  17. 3D-Printing Crystallographic Unit Cells for Learning Materials Science and Engineering

    Science.gov (United States)

    Rodenbough, Philip P.; Vanti, William B.; Chan, Siu-Wai

    2015-01-01

    Introductory materials science and engineering courses universally include the study of crystal structure and unit cells, which are by their nature highly visual 3D concepts. Traditionally, such topics are explored with 2D drawings or perhaps a limited set of difficult-to-construct 3D models. The rise of 3D printing, coupled with the wealth of…

  18. Experimental broadband absorption enhancement in silicon nanohole structures with optimized complex unit cells.

    Science.gov (United States)

    Lin, Chenxi; Martínez, Luis Javier; Povinelli, Michelle L

    2013-09-09

    We design silicon membranes with nanohole structures with optimized complex unit cells that maximize broadband absorption. We fabricate the optimized design and measure the optical absorption. We demonstrate an experimental broadband absorption about 3.5 times higher than an equally-thick thin film.

  19. Development of a unit cell model for interim performance assessment of vitrified low level waste disposal

    International Nuclear Information System (INIS)

    Kline, N.W.

    1995-09-01

    The unit cell modeling approach has been developed and used in analysis of some design options for a vitrified low level waste disposal facility. The unit cell modeling approach is likely to be useful in interim performance assessment for the facility. The present unit cell model will probably need to be refitted in terms of some model parameters for the latter purpose. Two present disposal facility concepts differ in the length of a capillary barrier proposed to limit effective recharge through the top of the facility. Results of the study summarized herein suggest design of a capillary barrier which can reduce a recharge rate of 0.1 cm/yr by one or two orders of magnitude seems feasible for both concepts. A benchmark comparison of the unit cell model against a full facility model shows comparable predictive accuracy in less than one percent of the computer time. Results suggest that model parameters include capillary barrier performance, inter-canister spacing, rate of moisture withdrawal due to glass corrosion, contaminant inventory, and the well interceptor factor. It is also important that variations of waste form hydraulic parameters suggest that transport through the waste form is dominated by diffusion

  20. Identification of two distinct chromosome 12-derived amplification units in neuroblastoma cell line NGP

    NARCIS (Netherlands)

    van Roy, N.; Forus, A.; Myklebost, O.; Cheng, N. C.; Versteeg, R.; Speleman, F.

    1995-01-01

    The neuroblastoma cell line NGP contains two homogeneously staining regions (hsr). One of these hsrs contains MYCN sequences. Reverse painting experiments demonstrated that the second HSR consisted of two chromosome 12-derived amplification units, located at 12q14-15 and 12q24. Southern blot and

  1. Dimensions of Creative Evaluation

    DEFF Research Database (Denmark)

    Christensen, Bo; Ball, Linden J.

    2016-01-01

    We examined evaluative reasoning taking place during expert ‘design critiques’. We focused on key dimensions of creative evaluation (originality, functionality and aesthetics) and ways in which these dimensions impact reasoning strategies and suggestions offered by experts for how the student could...... continue. Each dimension was associated with a specific underpinning ‘logic’ determining how these dimensions were evaluated in practice. Our analysis clarified how these dimensions triggered reasoning strategies such as running mental simulations or making design suggestions, ranging from ‘go...

  2. More dimensions: Less entropy

    International Nuclear Information System (INIS)

    Kolb, E.W.; Lindley, D.; Seckel, D.

    1984-01-01

    For a cosmological model with d noncompact and D compact spatial dimensions and symmetry R 1 x S/sup d/ x S/sup D/, we calculate the entropy produced in d dimensions due to the compactification of D dimensions and show it too small to be of cosmological interest. Although insufficient entropy is produced in the model we study, the contraction of extra dimensions does lead to entropy production. We discuss modifications of our assumptions, including changing our condition for decoupling of the extra dimensions, which may lead to a large entropy production and change our conclusions

  3. A heated vapor cell unit for dichroic atomic vapor laser lock in atomic rubidium.

    Science.gov (United States)

    McCarron, Daniel J; Hughes, Ifan G; Tierney, Patrick; Cornish, Simon L

    2007-09-01

    The design and performance of a compact heated vapor cell unit for realizing a dichroic atomic vapor laser lock (DAVLL) for the D(2) transitions in atomic rubidium is described. A 5 cm long vapor cell is placed in a double-solenoid arrangement to produce the required magnetic field; the heat from the solenoid is used to increase the vapor pressure and correspondingly the DAVLL signal. We have characterized experimentally the dependence of important features of the DAVLL signal on magnetic field and cell temperature. For the weaker transitions both the amplitude and gradient of the signal are increased by an order of magnitude.

  4. A heated vapor cell unit for dichroic atomic vapor laser lock in atomic rubidium

    International Nuclear Information System (INIS)

    McCarron, Daniel J.; Hughes, Ifan G.; Tierney, Patrick; Cornish, Simon L.

    2007-01-01

    The design and performance of a compact heated vapor cell unit for realizing a dichroic atomic vapor laser lock (DAVLL) for the D 2 transitions in atomic rubidium is described. A 5 cm long vapor cell is placed in a double-solenoid arrangement to produce the required magnetic field; the heat from the solenoid is used to increase the vapor pressure and correspondingly the DAVLL signal. We have characterized experimentally the dependence of important features of the DAVLL signal on magnetic field and cell temperature. For the weaker transitions both the amplitude and gradient of the signal are increased by an order of magnitude

  5. Modulation of the androgenetic response in diverse skin cell types: the pilosebaceous unit

    International Nuclear Information System (INIS)

    Zurvarra, F.; Kerner, N.; Hagelin, K.

    2009-01-01

    Androgens play a central role in diverse morphogenetic processes of the skin. Hair growth and follicular cycle are regulated in part by androgens. Androgens also play a key function, together with other receptors such as the PPARs receptors family, on the proliferation and differentiation of the sebaceous gland that forms part of the pilosebaceous unit and influences hair growth and skin well-being. UV radiation may affect androgens regulation of skin homeostasis. Objectives: to study the modulation of androgenetic response related to UV radiation on the pilosebaceous unit, in two skin conditions: androgenetic alopecia and acne, both affecting skin and constituting major concerns for affected individuals. Methods: primary cultures of cells and established cell lines from the pilosebaceous unit: dermal papillae cells, keratinocytes and sebocytes. Analysis of lipid content, inflammatory response and proliferation of cells under the influence of androgens, PPARs ligands and UVR. Results: sebocytes primary cultures were obtained from human sebaceous glands. Proliferation and differentiation, as well as the expression of proinflammatory molecules (IL-1, TNF alpha, iNOs) and lipogenic enzymes (FASN) under androgens and UV treatment were assessed. The response to androgens under UV exposure was also analyzed in dermal papillae cells in culture. (authors)

  6. Three-dimensional reconstruction of statistically optimal unit cells of polydisperse particulate composites from microtomography

    International Nuclear Information System (INIS)

    Lee, H.; Brandyberry, M.; Tudor, A.; Matous, K.

    2009-01-01

    In this paper, we present a systematic approach for characterization and reconstruction of statistically optimal representative unit cells of polydisperse particulate composites. Microtomography is used to gather rich three-dimensional data of a packed glass bead system. First-, second-, and third-order probability functions are used to characterize the morphology of the material, and the parallel augmented simulated annealing algorithm is employed for reconstruction of the statistically equivalent medium. Both the fully resolved probability spectrum and the geometrically exact particle shapes are considered in this study, rendering the optimization problem multidimensional with a highly complex objective function. A ten-phase particulate composite composed of packed glass beads in a cylindrical specimen is investigated, and a unit cell is reconstructed on massively parallel computers. Further, rigorous error analysis of the statistical descriptors (probability functions) is presented and a detailed comparison between statistics of the voxel-derived pack and the representative cell is made.

  7. In vivo studies of the long-term 51Cr red cell survival of serologically incompatible red cell units

    International Nuclear Information System (INIS)

    Baldwin, M.L.; Ness, P.M.; Barrasso, C.; Kickler, T.S.; Drew, H.; Tsan, M.F.; Shirey, R.S.

    1985-01-01

    The long-term survival of serologically incompatible red cell units was measured in five patients with antibodies to high-frequency antigens. Initially, the survival of 1 ml of 51 Cr-labeled incompatible red cells was measured over 1 hour. After demonstrating that the 1-hour survival times were successful (greater than 70%), each patient then received 5 ml of the same 51 Cr-labeled red cells followed by the transfusion of the remainder of the red cell unit. The long-term T 1/2Cr survival for each case was patient 1 (anti-McCa), 15 days; patient 2 (anti-JMH), 12 days; patient 3 (anti-Kna), 31 days; patient 4 (anti-McCa), 12 days; and patient 5 (anti-Hya), 14 days. Each antibody tested in an in vitro homologous macrophage assay showed less than 5 percent phagocytosis. Anti-JMH was the only antibody to react with IgG subclass antisera and was determined to be IgG4. The macrophage assay, IgG subclass testing, and short-term (1 hour, 1 ml) 51 Cr survival studies all indicated that the short-term survival was good. However, only the measurement of long-term survival with transfused units of serologically incompatible red cells was able to determine the actual survival, and clinical significance of the alloantibodies. Determining the actual long-term survival by the method described here can be of importance for patients requiring chronic red cell transfusion

  8. Fuel cell collaboration in the United States. Follow up report to the Danish Partnership for Hydrogen and Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-01-15

    Fuel cell technology continues to grow in the United States, with strong sales in stationary applications and early markets such as data centers, materials handling equipment, and telecommunications sites. New fuel cell customers include Fortune 500 companies Apple, eBay, Coca-Cola, and Walmart, who will use fuel cells to provide reliable power to data centers, stores, and facilities. Some are purchasing multi-megawatt (MW) systems, including three of the largest non-utility purchases of stationary fuel cells in the world by AT and T, Apple and eBay - 17 MW, 10 MW and 6 MW respectively. Others are replacing fleets of battery forklifts with fuel cells. Sysco, the food distributor, has more than 700 fuel cell-powered forklifts operating at seven facilities, with more on order. Mega-retailer Walmart now operates more than 500 fuel cell forklifts at three warehouses, including a freezer facility. Although federal government budget reduction efforts are impacting a wide range of departments and programs, fuel cell and hydrogen technology continues to be funded, albeit at a lower level than in past years. The Department of Energy (DOE) is currently funding fuel cell and hydrogen R and D and has nearly 300 ongoing projects at companies, national labs, and universities/institutes universities. The American Recovery and Reinvestment Act (ARRA) of 2009 and DOE's Market Transformation efforts have acted as a government ''catalyst'' for market success of emerging technologies. Early market deployments of about 1,400 fuel cells under the ARRA have led to more than 5,000 additional fuel cell purchases by industry with no DOE funding. In addition, interest in Congress remains high. Senators Richard Blumenthal (D-CT), Chris Coons (D-DE), Lindsey Graham (R-SC) and John Hoeven (R-ND) re-launched the bipartisan Senate Fuel Cell and Hydrogen Caucus in August 2012 to promote the continued development and commercialization of hydrogen and fuel cell technologies

  9. Theoretical Dimensions of Small Unit Resilience

    Science.gov (United States)

    2010-12-01

    Post - traumatic Stress Disorder ( PTSD ), Suicide 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT...sent home. Yet, there were still others, those with post - traumatic stress disorder ( PTSD ). Soldiers who were changed by their experiences and unable...surveys on Operation Iraqi Freedom (OIF) and Operation Enduring Freedom (OEF) veterans have found high rates of post - traumatic stress disorder ( PTSD

  10. Regulations in the United States for cell transplantation clinical trials in neurological diseases

    Institute of Scientific and Technical Information of China (English)

    He Zhu; Yuanqing Tan; Qi Gu; Weifang Han; Zhongwen Li; Jason S Meyer; Baoyang Hu

    2015-01-01

    Objective: This study aimed to use a systematic approach to evaluate the current utilization, safety, and effectiveness of cell therapies for neurological diseases in human. And review the present regulations, considering United States (US) as a representative country, for cell transplantation in neurological disease and discuss the challenges facing the field of neurology in the coming decades. Methods:A detailed search was performed in systematic literature reviews of cellular‐based therapies in neurological diseases, using PubMed, web of science, and clinical trials. Regulations of cell therapy products used for clinical trials were searched from the Food and Drug Administration (FDA) and the National Institutes of Health (NIH). Results: Seven most common types of cell therapies for neurological diseases have been reported to be relatively safe with varying degrees of neurological recovery. And a series of regulations in US for cellular therapy was summarized including preclinical evaluations, sourcing material, stem cell manufacturing and characterization, cell therapy product, and clinical trials. Conclusions:Stem cell‐based therapy holds great promise for a cure of such diseases and will value a growing population of patients. However, regulatory permitting activity of the US in the sphere of stem cells, technologies of regenerative medicine and substitutive cell therapy are selective, theoretical and does not fit the existing norm and rules. Compiled well‐defined regulations to guide the application of stem cell products for clinical trials should be formulated.

  11. Problems with Generalising: Pythagoras in N Dimensions

    Science.gov (United States)

    Foster, Colin

    2013-01-01

    Pythagoras' theorem in two and three dimensions appears in General Mathematics, Units 1-2, section 6 (Geometry and trigonometry: Shape and measurement) in the Victorian Certificate of Education Mathematics Study Design (Victorian Curriculum Assessment Authority, 2010). It also comes in Further Mathematics, Units 3-4 (Applications: Geometry and…

  12. E-Government Dimension

    OpenAIRE

    Rosiyadi, Didi; Suryana, Nana; Cahyana, Ade; Nuryani, Nuryani

    2007-01-01

    Makalah ini mengemukakan E-Government Dimension yang merupakan salah satu hasil TahapanPengumpulan Data, dimana tahapan ini adalah bagian dari penelitian kompetitif di Lembaga Ilmu PengetahuanIndonesia 2007 yang sekarang sedang dilakukan. Data E-Government Dimension ini didapatkan dari berbagaisumber yang meliputi E-Government beberapa Negara di dunia, E-Government yang dibangun oleh beberapapenyedia aplikasi E-Government. E-Government Dimension terdiri dari tiga dimensi yaitu DemocraticDimen...

  13. Relaxing to Three Dimensions

    CERN Document Server

    CERN. Geneva

    2006-01-01

    Extra dimensions of space might be present in our universe. If so, we want to know 'How do dimensions hide?' and 'Why are three dimensions special?' I'll give potential answers to both these questions in the context of localized gravity. Organiser(s): L. Alvarez-Gaume / PH-THNote: * Tea & coffee will be served at 16:00. Talk is broadcasted in Council Chamber

  14. The Modal Dimension

    Directory of Open Access Journals (Sweden)

    Giluano Torrengo

    2018-05-01

    Full Text Available Space and time are two obvious candidates as dimensions of reality. Yet, are they the only two dimensions of reality? Famously, David Lewis maintained the doctrine of ―modal realism‖, the thesis that possible worlds exist and are entities as concrete as the actual world that we live in. In this paper, I will explore the idea that modality can be construed as a dimension along with space and time. However, although Lewis‘ modal realism is the main source of inspiration for this construal of modality, I will argue that something else is required for having a modal dimension.

  15. CLIMATE CHANGE FUEL CELL PROGRAM UNITED STATES COAST GUARD AIR STATION CAPE COD BOURNE, MASSACHUSETTS

    Energy Technology Data Exchange (ETDEWEB)

    John K. Steckel Jr

    2004-06-30

    This report covers the first year of operation of a fuel cell power plant, installed by PPL Spectrum, Inc. (PPL) under contract with the United States Coast Guard (USCG), Research and Development Center (RDC). The fuel cell was installed at Air Station Cape Cod in Bourne, MA. The project had the support of the Massachusetts Technology Collaborative (MTC), the Department of Energy (DOE), and Keyspan Energy. PPL selected FuelCell Energy, Inc. (FCE) and its fuel cell model DFC{reg_sign}300 for the contract. Grant contributions were finalized and a contract between PPL and the USCG for the manufacture, installation, and first year's maintenance of the fuel cell was executed on September 24, 2001. As the prime contractor, PPL was responsible for all facets of the project. All the work was completed by PPL through various subcontracts, including the primary subcontract with FCE for the manufacture, delivery, and installation of the fuel cell. The manufacturing and design phases proceeded in a relatively timely manner for the first half of the project. However, during latter stages of manufacture and fuel cell testing, a variety of issues were encountered that ultimately resulted in several delivery delays, and a number of contract modifications. Final installation and field testing was completed in April and May 2003. Final acceptance of the fuel cell was completed on May 16, 2003. The fuel cell has operated successfully for more than one year. The unit achieved an availability rate of 96%, which exceeded expectations. The capacity factor was limited because the unit was set at 155 kW (versus a nameplate of 250 kW) due to the interconnection with the electric utility. There were 18 shutdowns during the first year and most were brief. The ability of this plant to operate in the island mode improved availability by 3 to 4%. Events that would normally be shutdowns were simply island mode events. The mean time between failure was calculated at 239 hours, or slightly

  16. Computer programs for unit-cell determination in electron diffraction experiments

    International Nuclear Information System (INIS)

    Li, X.Z.

    2005-01-01

    A set of computer programs for unit-cell determination from an electron diffraction tilt series and pattern indexing has been developed on the basis of several well-established algorithms. In this approach, a reduced direct primitive cell is first determined from experimental data, in the means time, the measurement errors of the tilt angles are checked and minimized. The derived primitive cell is then checked for possible higher lattice symmetry and transformed into a proper conventional cell. Finally a least-squares refinement procedure is adopted to generate optimum lattice parameters on the basis of the lengths of basic reflections in each diffraction pattern and the indices of these reflections. Examples are given to show the usage of the programs

  17. Increased numbers of spleen colony forming units in B cell deficient CBA/N mice

    International Nuclear Information System (INIS)

    Wiktor-Jedrzejczak, W.; Krupienicz, A.; Scher, I.

    1986-01-01

    The formation of exogenous and endogenous spleen colonies was studied in immune-defective mice expressing the CBA/N X-linked xid gene. Bone marrow and spleen cells of immune deficient mice formed increased numbers of eight-day exogenous spleen colonies when transferred to either normal or B cell deficient lethally irradiated recipients. Moreover, defective mice showed increased formation of five-day endogenous spleen colonies (derived from transient endogenous colony forming units; T-CFU) and of ten-day endogenous spleen colonies (derived from CFU-S). Among the possible mechanisms responsible for the observed effects, the most probable appears the one in which decreased numbers of B cell precursors stimulate stem cell pools through a feedback mechanism. (orig.) [de

  18. Magnetoresistance oscillations of two-dimensional electron systems in lateral superlattices with structured unit cells

    Science.gov (United States)

    Gerhardts, Rolf R.

    2015-11-01

    Model calculations for commensurability oscillations of the low-field magnetoresistance of two-dimensional electron systems (2DES) in lateral superlattices, consisting of unit cells with an internal structure, are compared with recent experiments. The relevant harmonics of the effective modulation potential depend not only on the geometrical structure of the modulated unit cell, but also strongly on the nature of the modulation. While higher harmonics of an electrostatically generated surface modulation are exponentially damped at the position of the 2DES about 90 nm below the surface, no such damping appears for strain-induced modulation generated, e.g., by the deposition of stripes of calixarene resist on the surface before cooling down the sample.

  19. Dimensions of Adolescent Employment.

    Science.gov (United States)

    Mael, Fred A.; Morath, Ray A.; McLellan, Jeffrey A.

    1997-01-01

    Examines positive and negative correlates of adolescent work as a function of work dimensions. Results indicate that concurrent costs and benefits of adolescent employment may depend on dimensions of work as well as adolescent characteristics. Adolescent employment was generally related to subsequent work motivation and nonacademic performance.…

  20. User Experience Dimensions

    DEFF Research Database (Denmark)

    Lykke, Marianne; Jantzen, Christian

    2016-01-01

    The present study develops a set of 10 dimensions based on a systematic understanding of the concept of experience as a holistic psychological. Seven of these are derived from a psychological conception of what experiencing and experiences are. Three supplementary dimensions spring from the obser...

  1. Dimensions des stabulations 2018

    OpenAIRE

    Früh, Barbara; Maurer, Veronika; Schneider, Claudia; Schürmann, Stefan; Spengler Neff, Anet; Werne, Steffen

    2018-01-01

    Les «Dimensions des stabulations» contiennent toutes les dimensions pour les stabulations et les parcours pour la production animale en agriculture biologique. Cette liste sert d’instrument de planification pour les éleveurs, d’outil de travail pour la vulgarisation et d’ouvrage de référence pour le contrôle bio.

  2. Utilization of transmission probabilities in the calculation of unit-cell by the interface-current method

    International Nuclear Information System (INIS)

    Queiroz Bogado Leite, S. de.

    1989-10-01

    A widely used but otherwise physically incorrect assumption in unit-cell calculations by the method of interface currents in cylindrical or spherical geometries, is that of that of isotropic fluxes at the surfaces of the cell annular regions, when computing transmission probabilities. In this work, new interface-current relations are developed without making use of this assumption and the effects on calculated integral parameters are shown for an idealized unit-cell example. (author) [pt

  3. Dielectric Behavior of Low Microwave Loss Unit Cell for All Dielectric Metamaterial

    Directory of Open Access Journals (Sweden)

    Tianhuan Luo

    2015-01-01

    Full Text Available With a deep study of the metamaterial, its unit cells have been widely extended from metals to dielectrics. The dielectric based unit cells attract much attention because of the advantage of easy preparation, tunability, and higher frequency response, and so forth. Using the conventional solid state method, we prepared a kind of incipient ferroelectrics (calcium titanate, CaTiO3 with higher microwave permittivity and lower loss, which can be successfully used to construct metamaterials. The temperature and frequency dependence of dielectric constant are also measured under different sintering temperatures. The dielectric spectra showed a slight permittivity decrease with the increase of temperature and exhibited a loss of 0.0005, combined with a higher microwave dielectric constant of ~167 and quality factor Q of 2049. Therefore, CaTiO3 is a kind of versatile and potential metamaterial unit cell. The permittivity of CaTiO3 at higher microwave frequency was also examined in the rectangular waveguide and we got the permittivity of 165, creating a new method to test permittivity at higher microwave frequency.

  4. Relations between effective potentials in different dimensions

    International Nuclear Information System (INIS)

    Bollini, C.G.; Giambiagi, J.J.

    1983-01-01

    Using dimensional regularization, the one-loop approximation for the effective potential (finite temperature) is computed as an analytic function of the number of dimensions. It is shown that a simple relation exists between potentials for different dimensions. This relation reduces to a simple derivative when these numbers differ by two units. The limit of zero temperature is calculated and also the finite temperature corrections are given. (Author) [pt

  5. Dimension of linear models

    DEFF Research Database (Denmark)

    Høskuldsson, Agnar

    1996-01-01

    Determination of the proper dimension of a given linear model is one of the most important tasks in the applied modeling work. We consider here eight criteria that can be used to determine the dimension of the model, or equivalently, the number of components to use in the model. Four of these cri......Determination of the proper dimension of a given linear model is one of the most important tasks in the applied modeling work. We consider here eight criteria that can be used to determine the dimension of the model, or equivalently, the number of components to use in the model. Four...... the basic problems in determining the dimension of linear models. Then each of the eight measures are treated. The results are illustrated by examples....

  6. Comparison of elastic properties of open-cell metallic biomaterials with different unit cell types

    NARCIS (Netherlands)

    Hedayati, R.; Sadighi, M.; Mohammadi-Aghdam, M; Hosseini-Toudeshky, H

    2018-01-01

    Additive manufacturing techniques have made it possible to create open-cell porous structures with arbitrary micro-geometrical characteristics. Since a wide range of micro-geometrical features is available for making an implant, having a comprehensive knowledge of the mechanical response of

  7. Inulin isoforms differ by repeated additions of one crystal unit cell

    Science.gov (United States)

    Cooper, Peter D.; Barclay, Thomas G.; Ginic-Markovic, Milena; Gerson, Andrea R.; Petrovsky, Nikolai

    2014-01-01

    Inulin isoforms, especially delta inulin, are important biologically as immune activators and clinically as vaccine adjuvants. In exploring action mechanisms, we previously found regular increments in thermal properties of the seven-member inulin isoform series that suggested regular additions of some energetic structural unit. Because the previous isolates carried additional longer chains that masked defining ranges, these were contrasted with new isoform isolates comprising only inulin chain lengths defining that isoform. The new series began with 19 fructose units per chain (alpha-1 inulin), increasing regularly by 6 fructose units per isoform. Thus the ‘energetic unit’ equates to 6 fructose residues per chain. All isoforms showed indistinguishable X-ray diffraction patterns that were also identical with known inulin crystals. We conclude that an ‘energetic unit’ equates to one helix turn of 6 fructose units per chain as found in one unit cell of the inulin crystal. Each isoform chain comprised progressively more helix turns plus one additional fructose and glucose residues per chain. PMID:24528745

  8. Dimensions of patient safety culture in family practice.

    Science.gov (United States)

    Palacios-Derflingher, Luz; O'Beirne, Maeve; Sterling, Pam; Zwicker, Karen; Harding, Brianne K; Casebeer, Ann

    2010-01-01

    Safety culture has been shown to affect patient safety in healthcare. While the United States and United Kingdom have studied the dimensions that reflect patient safety culture in family practice settings, to date, this has not been done in Canada. Differences in the healthcare systems between these countries and Canada may affect the dimensions found to be relevant here. Thus, it is important to identify and compare the dimensions from the United States and the United Kingdom in a Canadian context. The objectives of this study were to explore the dimensions of patient safety culture that relate to family practice in Canada and to determine if differences and similarities exist between dimensions found in Canada and those found in previous studies undertaken in the United States and the United Kingdom. A qualitative study was undertaken applying thematic analysis using focus groups with family practice offices and supplementary key stakeholders. Analysis of the data indicated that most of the dimensions from the United States and United Kingdom are appropriate in our Canadian context. Exceptions included owner/managing partner/leadership support for patient safety, job satisfaction and overall perceptions of patient safety and quality. Two unique dimensions were identified in the Canadian context: disclosure and accepting responsibility for errors. Based on this early work, it is important to consider differences in care settings when understanding dimensions of patient safety culture. We suggest that additional research in family practice settings is critical to further understand the influence of context on patient safety culture.

  9. Major design issues of molten carbonate fuel cell power generation unit

    Energy Technology Data Exchange (ETDEWEB)

    Chen, T.P.

    1996-04-01

    In addition to the stack, a fuel cell power generation unit requires fuel desulfurization and reforming, fuel and oxidant preheating, process heat removal, waste heat recovery, steam generation, oxidant supply, power conditioning, water supply and treatment, purge gas supply, instrument air supply, and system control. These support facilities add considerable cost and system complexity. Bechtel, as a system integrator of M-C Power`s molten carbonate fuel cell development team, has spent substantial effort to simplify and minimize these supporting facilities to meet cost and reliability goals for commercialization. Similiar to other fuels cells, MCFC faces design challenge of how to comply with codes and standards, achieve high efficiency and part load performance, and meanwhile minimize utility requirements, weight, plot area, and cost. However, MCFC has several unique design issues due to its high operating temperature, use of molten electrolyte, and the requirement of CO2 recycle.

  10. The fourth dimension

    CERN Document Server

    Rucker, Rudy

    2014-01-01

    ""This is an invigorating book, a short but spirited slalom for the mind."" - Timothy Ferris, The New York Times Book Review ""Highly readable. One is reminded of the breadth and depth of Hofstadter's Gödel, Escher, Bach."" - Science""Anyone with even a minimal interest in mathematics and fantasy will find The Fourth Dimension informative and mind-dazzling... [Rucker] plunges into spaces above three with a zest and energy that is breathtaking."" - Martin Gardner ""Those who think the fourth dimension is nothing but time should be encouraged to read The Fourth Dimension, along with anyone else

  11. Dimension from covariance matrices.

    Science.gov (United States)

    Carroll, T L; Byers, J M

    2017-02-01

    We describe a method to estimate embedding dimension from a time series. This method includes an estimate of the probability that the dimension estimate is valid. Such validity estimates are not common in algorithms for calculating the properties of dynamical systems. The algorithm described here compares the eigenvalues of covariance matrices created from an embedded signal to the eigenvalues for a covariance matrix of a Gaussian random process with the same dimension and number of points. A statistical test gives the probability that the eigenvalues for the embedded signal did not come from the Gaussian random process.

  12. Cell phone recycling experiences in the United States and potential recycling options in Brazil.

    Science.gov (United States)

    Silveira, Geraldo T R; Chang, Shoou-Yuh

    2010-11-01

    This paper presents an overview of cell phone recycling programs currently available in the United States. At the same time, it also provides analyses of the current recycling situation and possible recycling alternatives for Brazil. Although there are several recycling options in the United States, collection rates are still only 10% of all potential devices because customers are not aware of these possibilities. The whole system is financially based on reselling refurbished cell phones and recycled materials to developing countries which represent an effective and strong market. Several recyclers offer funds to collection partners who are either charities or who work with charities while obtaining the materials that they need in order to run their operations. A mobile phone recycling system for Brazil considering the United States experience and the Extended Producer Responsibility (EPR) principle is suggested. A deposit/refund/advance-recycling fee is proposed which might be implemented as a voluntary industrial initiative managed by PRO Brazil, a producer responsibility organization. One widespread public-private agreement will integrate all mobile phone stakeholders, and environmental education actions and promotional events will promote citizen's participation. Copyright © 2010 Elsevier Ltd. All rights reserved.

  13. Escaping in extra dimensions

    CERN Multimedia

    CERN. Geneva. Audiovisual Unit

    2002-01-01

    Recent progress in the formulation of fundamental theories for a Universe with more than 4 dimensions will be reviewed. Particular emphasis will be given to theories predicting the existence of extra dimensions at distance scales within the reach of current or forthcoming experiments. The phenomenological implications of these theories, ranging from detectable deviations from Newton's law at sub-millimeter scales, to phenomena of cosmological and astrophysical interest, as well as to high-energy laboratory experiments, will be discussed.

  14. Gender Dimensions Framework Application

    OpenAIRE

    Rubin, D.

    2011-01-01

    This is a presentation of the The Gender Dimensions Framework (GDF). The GDF was developed to provide guidance to USAID staff and partner organizations for working with USAID projects looking at promoting equitable opportunities in agricultural value chains. The GDF contemplates four dimensions: access to and control over key productive assets (tangible and intangible); beliefs and perceptions; practices and participation, and legal frameworks. CCRA-7 (Gendered Knowledge)

  15. Theoretical Analysis of Moving Reference Planes Associated with Unit Cells of Nonreciprocal Lossy Periodic Transmission-Line Structures

    Directory of Open Access Journals (Sweden)

    S. Lamultree

    2017-04-01

    Full Text Available This paper presents a theoretical analysis of moving reference planes associated with unit cells of nonreciprocal lossy periodic transmission-line structures (NRLSPTLSs by the equivalent bi-characteristic-impedance transmission line (BCITL model. Applying the BCITL theory, only the equivalent BCITL parameters (characteristic impedances for waves propagating in forward and reverse directions and associated complex propagation constants are of interest. An infinite NRLSPTLS is considered first by shifting a reference position of unit cells along TLs of interest. Then, a semi-infinite terminated NRLSPTLS is investigated in terms of associated load reflection coefficients. It is found that the equivalent BCITL characteristic impedances of the original and shifted unit cells are mathematically related by the bilinear transformation. In addition, the associated load reflection coefficients of both unit cells are mathematically related by the bilinear transformation. However, the equivalent BCITL complex propagation constants remain unchanged. Numerical results are provided to show the validity of the proposed theoretical analysis.

  16. Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell.

    Science.gov (United States)

    Kadkhodapour, J; Montazerian, H; Darabi, A Ch; Anaraki, A P; Ahmadi, S M; Zadpoor, A A; Schmauder, S

    2015-10-01

    Since the advent of additive manufacturing techniques, regular porous biomaterials have emerged as promising candidates for tissue engineering scaffolds owing to their controllable pore architecture and feasibility in producing scaffolds from a variety of biomaterials. The architecture of scaffolds could be designed to achieve similar mechanical properties as in the host bone tissue, thereby avoiding issues such as stress shielding in bone replacement procedure. In this paper, the deformation and failure mechanisms of porous titanium (Ti6Al4V) biomaterials manufactured by selective laser melting from two different types of repeating unit cells, namely cubic and diamond lattice structures, with four different porosities are studied. The mechanical behavior of the above-mentioned porous biomaterials was studied using finite element models. The computational results were compared with the experimental findings from a previous study of ours. The Johnson-Cook plasticity and damage model was implemented in the finite element models to simulate the failure of the additively manufactured scaffolds under compression. The computationally predicted stress-strain curves were compared with the experimental ones. The computational models incorporating the Johnson-Cook damage model could predict the plateau stress and maximum stress at the first peak with less than 18% error. Moreover, the computationally predicted deformation modes were in good agreement with the results of scaling law analysis. A layer-by-layer failure mechanism was found for the stretch-dominated structures, i.e. structures made from the cubic unit cell, while the failure of the bending-dominated structures, i.e. structures made from the diamond unit cells, was accompanied by the shearing bands of 45°. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Unit cell modeling in support of interim performance assessment for low level tank waste disposal

    International Nuclear Information System (INIS)

    Kline, N.W.

    1996-01-01

    A unit cell model is used to simulate the base analysis case and related sensitivity cases for the interim performance assessment of low level tank waste disposal. Simulation case results are summarized in terms of fractional contaminant release rates to the vadose zone and to the water table at the unconfined aquifer. Results suggest that the crushed glass water conditioning layer at the top of the facility and the chemical retardation pad at the bottom of the facility can be important components of the facility. Results also suggest that the release rates to the water table are dominated by the release rate from the waste form

  18. High quality-factor fano metasurface comprising a single resonator unit cell

    Science.gov (United States)

    Sinclair, Michael B.; Warne, Larry K.; Basilio, Lorena I.; Langston, William L.; Campione, Salvatore; Brener, Igal; Liu, Sheng

    2017-06-20

    A new monolithic resonator metasurface design achieves ultra-high Q-factors while using only one resonator per unit cell. The metasurface relies on breaking the symmetry of otherwise highly symmetric resonators to induce intra-resonator mixing of bright and dark modes (rather than inter-resonator couplings), and is scalable from the near-infrared to radio frequencies and can be easily implemented in dielectric materials. The resulting high-quality-factor Fano metasurface can be used in many sensing, spectral filtering, and modulation applications.

  19. Fuel cell collaboration in the United States. A report to the Danish Partnership for Hydrogen and Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    2011-08-15

    The purpose of this report is to provide members of the Danish Partnership for Hydrogen and Fuel Cells with information regarding collaborative opportunities in the United States. The report is designed to provide an overview of key issues and activities and to provide guidance on strategies for finding U.S. research and commercial partners and gaining access to the U.S. market. Section 1 of this report provides an overview of the key drivers of policy at the federal and state government levels regarding hydrogen and fuel cell technologies and provides a perspective of the U.S. industry and key players. It also suggests three general pathways for accessing U.S. opportunities: enhancing visibility; developing vendor relationships; and establishing a formal presence in the U.S. The next sections summarize focus areas for commercial and research activity that currently are of the greatest interest in the U.S. Section 2 describes major programs within the federal government and national laboratories, and discusses various methods for identifying R and D funding opportunities, with an overview of federal acquisition regulations. Section 3 reviews the efforts of several state governments engaging the fuel cell industry as an economic driver and presents an overview of acquisition at the state level. Section 4 discusses university research and development (R and D) and university-industry partnerships. There are 12 appendices attached to the report. These appendices provide more detailed information regarding the key federal government agencies involved in fuel cells and hydrogen, state-specific policies and activities, national laboratories and universities, and other information regarding the fuel cell and hydrogen industry in the U.S. (Author)

  20. Development of a solid oxide fuel cell (SOFC) automotive auxiliary power unit (APU) fueled by gasoline

    International Nuclear Information System (INIS)

    DeMinco, C.; Mukerjee, S.; Grieve, J.; Faville, M.; Noetzel, J.; Perry, M.; Horvath, A.; Prediger, D.; Pastula, M.; Boersma, R.; Ghosh, D.

    2000-01-01

    This paper describes the design and the development progress of a 3 to 5 auxiliary power unit (APU) based on a gasoline fueled solid oxide fuel cell (SOFC). This fuel cell was supplied reformate gas (reactant) by a partial oxidation (POx) catalytic reformer utilizing liquid gasoline and designed by Delphi Automotive Systems. This reformate gas consists mainly of hydrogen, carbon monoxide and nitrogen and was fed directly in to the SOFC stack without any additional fuel reformer processing. The SOFC stack was developed by Global Thermoelectric and operates around 700 o C. This automotive APU produces power to support future 42 volt vehicle electrical architectures and loads. The balance of the APU, designed by Delphi Automotive Systems, employs a packaging and insulation design to facilitate installation and operation on-board automobiles. (author)

  1. A variational principle for the Hausdorff dimension of fractal sets

    DEFF Research Database (Denmark)

    Olsen, Lars; Cutler, Colleen D.

    1994-01-01

    Matematik, fraktal (fractal), Hausdorff dimension, Renyi dimension, pakke dimension (packing dimension)......Matematik, fraktal (fractal), Hausdorff dimension, Renyi dimension, pakke dimension (packing dimension)...

  2. Perceptual dimensions differentiate emotions.

    Science.gov (United States)

    Cavanaugh, Lisa A; MacInnis, Deborah J; Weiss, Allen M

    2015-08-26

    Individuals often describe objects in their world in terms of perceptual dimensions that span a variety of modalities; the visual (e.g., brightness: dark-bright), the auditory (e.g., loudness: quiet-loud), the gustatory (e.g., taste: sour-sweet), the tactile (e.g., hardness: soft vs. hard) and the kinaesthetic (e.g., speed: slow-fast). We ask whether individuals use perceptual dimensions to differentiate emotions from one another. Participants in two studies (one where respondents reported on abstract emotion concepts and a second where they reported on specific emotion episodes) rated the extent to which features anchoring 29 perceptual dimensions (e.g., temperature, texture and taste) are associated with 8 emotions (anger, fear, sadness, guilt, contentment, gratitude, pride and excitement). Results revealed that in both studies perceptual dimensions differentiate positive from negative emotions and high arousal from low arousal emotions. They also differentiate among emotions that are similar in arousal and valence (e.g., high arousal negative emotions such as anger and fear). Specific features that anchor particular perceptual dimensions (e.g., hot vs. cold) are also differentially associated with emotions.

  3. Dimensão relacional da atividade de cuidado e condições de trabalho de auxiliares de enfermagem em uma unidade neonatal The relational dimension of the care activity and the working conditions in a neonatal unit

    Directory of Open Access Journals (Sweden)

    Letícia Pessoa Masson

    2011-01-01

    Full Text Available Este artigo analisa as condições de trabalho de auxiliares de enfermagem que atuam em Unidade Neonatal, considerando a dimensão relacional da atividade de cuidado. Tendo como principais referências epistemológicas a concepção canguilhemiana de saúde e a perspectiva ergológica, a pesquisa se pautou em abordagens clínicas do trabalhar, incluindo métodos diretos (observações, indiretos (conversas e encontros sobre o trabalho com as auxiliares e análise de documentos relativos às normas antecedentes desse trabalho. Analisou-se fundamentalmente a produção linguageira dos coletivos. Entre os resultados encontrados, destacam-se: o desenvolvimento dessa atividade de cuidado implica intensa mobilização das trabalhadoras; a possibilidade de não atender às mães que chegam para ter seus bebês parece ser mais nocivo à saúde dessas profissionais do que trabalhar com um número excessivo de pacientes. Concluiu-se que as condições precárias de trabalho são potencialmente produtoras de sofrimento patogênico, uma vez que a realização prazerosa e bem-sucedida dessa atividade é dificultada.This paper focuses on the working conditions of nursing technicians of Neonatal Units, considering the relational dimension of the care activity. Having as main epistemological references Canguilhem's concept of health of and the Ergological perspective, the research was based on the clinical approaches of work, including the following methods: direct (observations and indirect (talks and meetings about work with the technicians; analysis of documents on the previous norms concerning this work. The analysis dealt basically with the groups' language production. Some results can be highlighted: the development of this care activity implies intense mobilization of workers; the possibility of not assisting the mothers who arrive to have their babies seems to be more noxious to these technicians than to work with an overload of patients; the precarious

  4. Unit cell-based computer-aided manufacturing system for tissue engineering

    International Nuclear Information System (INIS)

    Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

    2012-01-01

    Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering. (paper)

  5. Unit cell-based computer-aided manufacturing system for tissue engineering.

    Science.gov (United States)

    Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

    2012-03-01

    Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering.

  6. OECD benchmark a of MOX fueled PWR unit cells using SAS2H, triton and mocup

    International Nuclear Information System (INIS)

    Ganda, F.; Greenspan, A.

    2005-01-01

    Three code systems are tested by applying them to calculate the OECD PWR MOX unit cell benchmark A. The codes tested are the SAS2H code sequence of the SCALE5 code package using 44 group library, MOCUP (MCNP4C + ORIGEN2), and the new TRITON depletion sequence of SCALE5 using 238 group cross sections generated using CENTRM with continuous energy cross sections. The burnup-dependent k ∞ and actinides concentration calculated by all three code-systems were found to be in good agreement with the OECD benchmark average results. Limited results were calculated also with the WIMS-ANL code package. WIMS-ANL was found to significantly under-predict k ∞ as well as the concentration of Pu 242 , consistently with the predictions of the WIMS-LWR reported by two of the OECD benchmark participants. Additionally, SAS2H is benchmarked against MOCUP for a hydride fuel containing unit cell, giving very satisfactory agreement. (authors)

  7. New dimensions new hopes

    International Nuclear Information System (INIS)

    Sarkar, Utpal

    2001-05-01

    We live in a four dimensional world. But the idea of unification of fundamental interactions lead us to higher dimensional theories. Recently a new theory with extra dimensions has emerged where only gravity propagates in the extra dimension and all other interactions are confined to only four dimensions. This theory gives us many new hopes. In earlier theories unification of strong, weak and the electromagnetic forces was possible at around 10 16 GeV in a grand unified theory (GUT) and it could get unified with gravity at around the Planck scale of 10 19 GeV. With this new idea it is possible to bring down all unification scales within the reach of the new generation accelerators, i.e., around 10 4 GeV. (author)

  8. Dimension of linear models

    DEFF Research Database (Denmark)

    Høskuldsson, Agnar

    1996-01-01

    Determination of the proper dimension of a given linear model is one of the most important tasks in the applied modeling work. We consider here eight criteria that can be used to determine the dimension of the model, or equivalently, the number of components to use in the model. Four...... the basic problems in determining the dimension of linear models. Then each of the eight measures are treated. The results are illustrated by examples....... of these criteria are widely used ones, while the remaining four are ones derived from the H-principle of mathematical modeling. Many examples from practice show that the criteria derived from the H-principle function better than the known and popular criteria for the number of components. We shall briefly review...

  9. Pellet dimension checker

    International Nuclear Information System (INIS)

    Marmo, A.R.

    1980-01-01

    A pellet dimension checker was developed for use in making nuclear-fuel pellets. This checker eliminates operator handling of the pellet but permits remote-monitoring of the operation, and is thus suitable for mass production of green fuel pellets particularly in reprocessing plants handling irradiated uranium or plutonium. It comprises a rotatable arm for transferring a pellet from a conveyor to several dimensional measuring stations and back to the conveyor if the dimensions of the pellet are within predetermined limits. If the pellet is not within the limits, the arm removes the pellet from the process stream. (DN)

  10. Physics of extra dimensions

    International Nuclear Information System (INIS)

    Antoniadis, I

    2006-01-01

    Lowering the string scale in the TeV region provides a theoretical framework for solving the mass hierarchy problem and unifying all interactions. The apparent weakness of gravity can then be accounted by the existence of large internal dimensions, in the submillimeter region, and transverse to a braneworld where our universe must be confined. I review the main properties of this scenario and its implications for observations at both particle colliders, and in non-accelerator gravity experiments. Such effects are for instance the production of Kaluza-Klein resonances, graviton emission in the bulk of extra dimensions, and a radical change of gravitational forces in the submillimeter range

  11. Fractal dimension of cantori

    International Nuclear Information System (INIS)

    Li, W.; Bak, P.

    1986-01-01

    At a critical point the golden-mean Kolmogorov-Arnol'd-Moser trajectory of Chirikov's standard map breaks up into a fractal orbit called a cantorus. The transition describes a pinning of the incommensurate phase of the Frenkel-Kontorowa model. We find that the fractal dimension of the cantorus is D = 0 and that the transition from the Kolmogorov-Arnol'd-Moser trajectory with dimension D = 1 to the cantorus is governed by an exponent ν = 0.98. . . and a universal scaling function. It is argued that the exponent is equal to that of the Lyapunov exponent

  12. Compreendendo as dimensões de cuidado em uma unidade de emergência hospitalar Comprendiendo las dimensiones de cuidado en una unidad de emergencia hospitalar Understanding care dimensions in an emergency hospital unit

    Directory of Open Access Journals (Sweden)

    Maria Aparecida Baggio

    2009-06-01

    in day-to-day nursing work. Nineteen (19 subjects were interviewed in an emergency hospital unit in Santa Catarina, Brazil. The data was submitted to content analysis and interpreted according to complex thought. The care dimensions, presented in six categories, mobilize and articulate the multiple human competencies and techniques of/by caring beings in the comprehension of the nursing care process, from the perspective of those who receive care, including rethinking nursing practice itself and the multiple conditions of the environment as a space for care.

  13. Selective Attention to Perceptual Dimensions and Switching between Dimensions

    Science.gov (United States)

    Meiran, Nachshon; Dimov, Eduard; Ganel, Tzvi

    2013-01-01

    In the present experiments, the question being addressed was whether switching attention between perceptual dimensions and selective attention to dimensions are processes that compete over a common resource? Attention to perceptual dimensions is usually studied by requiring participants to ignore a never-relevant dimension. Selection failure…

  14. The histone genes in HeLa cells are on individual transcriptional units

    International Nuclear Information System (INIS)

    Hackett, P.B.; Traub, P.; Gallwitz, D.

    1978-01-01

    The distances of the five major histone genes from their promotors have been investigated in order to determine whether in human cells these genes could be transcribed as a single polycistronic transcriptional unit. By measuring the decreases of both histone protein and histone mRNA synthesis as functions of the ultraviolet light dosage, it was possible to calculate the distances of the histone genes from their promotors. The inactivation kinetics for histone genes H1 and H3 are first-order, indicating a single type of transcriptional unit for each gene. The dose-response kinetics for genes H2A, H2B and H4 are first-order with two distinct rates; 10 to 15% of the genes for each of these histones appear to be much more sensitive to ultraviolet light inactivation than are the majority. It is concluded that the transcriptional units for 85 to 90% of the genes for H2A, H2B and H4 are similar. As determined by the inhibition of protein synthesis, the inactivation coefficients for the major component of each histone are: H1, 907 mm 2 /erg; H2A, 878 mm 2 /erg; H2B, 871 mm 2 /erg; H3, 965 mm 2 /erg; and H4, 792 mm 2 /erg. The sensitivities of histone mRNA synthesis to irradiation were measured by translation in vitro with similar results. The calculated target sizes for the genes (in base-pairs) are: H1, 1190; H2A, 1240; H2B, 1250; H3, 1130; and H4, 1380. This similarity in target sizes for all five of the histones genes indicates that they are primarily transcribed from individual transcriptional units. (author)

  15. Ambulatory cell phone injuries in the United States: an emerging national concern.

    Science.gov (United States)

    Smith, Daniel C; Schreiber, Kristin M; Saltos, Andreas; Lichenstein, Sarah B; Lichenstein, Richard

    2013-12-01

    Over the past 15 years, the use of cell phones has increased 8-fold in the United States. Cell phone use has been shown to increase crash risks for drivers, but no systematic analyses have described injuries related to ambulatory cell phone use. The purpose of this study is to describe and quantitate injuries and deaths among persons using cell phones while walking. We searched the National Electronic Injury Surveillance System (NEISS) for emergency department (ED) reports of injuries related to phone use. The cases that returned were screened initially using words that would eliminate cases unlikely to be related to cell phone use and walking, possibly linked to distraction. The resulting cases were randomized and evaluated for consistency with predetermined case definitions by two authors blinded to the dates of the incidents. Cases that were disagreed upon were evaluated in a second screening by both authors for final case determination. National ED visit rates were estimated based on NEISS sampling methods. Annual variations were analyzed using linear regression with a restricted maximum likelihood approach. Our screening process identified 5,754 possible cases that occurred between 2000 and 2011, and 310 were agreed on as cases of cell-phone-induced distraction. The majority of the patients were female (68%) and 40 years of age or younger (54%). The primary mechanism of injury was a fall (72%), and most patients were treated and released from the ED (85%). No patients died from their injuries while they were in the ED. Linear modeling by year revealed a statistically significant increase in distraction injury rates over the years of study (pcell phone use has been increasing. More research is needed to determine the risks associated with walking and talking on a cell phone and to develop strategies for intervention. Cell phone use continues to increase both at home and outdoor environments. The use of smart phones, with their more enticing features, increases

  16. Dimension and extensions

    CERN Document Server

    Aarts, JM

    1993-01-01

    Two types of seemingly unrelated extension problems are discussed in this book. Their common focus is a long-standing problem of Johannes de Groot, the main conjecture of which was recently resolved. As is true of many important conjectures, a wide range of mathematical investigations had developed, which have been grouped into the two extension problems. The first concerns the extending of spaces, the second concerns extending the theory of dimension by replacing the empty space with other spaces. The problem of de Groot concerned compactifications of spaces by means of an adjunction of a set of minimal dimension. This minimal dimension was called the compactness deficiency of a space. Early success in 1942 lead de Groot to invent a generalization of the dimension function, called the compactness degree of a space, with the hope that this function would internally characterize the compactness deficiency which is a topological invariant of a space that is externally defined by means of compact extensions of a...

  17. Extra Dimensions of Space

    Science.gov (United States)

    Lincoln, Don

    2013-01-01

    They say that there is no such thing as a stupid question. In a pedagogically pure sense, that's probably true. But some questions do seem to flirt dangerously close to being really quite ridiculous. One such question might well be, "How many dimensions of space are there?" I mean, it's pretty obvious that there are three:…

  18. Dimension theory and forcing

    Czech Academy of Sciences Publication Activity Database

    Zapletal, Jindřich

    2014-01-01

    Roč. 167, April 15 (2014), s. 31-35 ISSN 0166-8641 R&D Projects: GA AV ČR IAA100190902 Institutional support: RVO:67985840 Keywords : Cohen real * infinite dimension * calibrated ideal Subject RIV: BA - General Mathematics Impact factor: 0.551, year: 2014 http://www.sciencedirect.com/science/article/pii/S0166864114001151

  19. Krull dimension in modal logic

    NARCIS (Netherlands)

    Bezhanishvili, G.; Bezhanishvili, N.; Lucero-Bryan, J.; van Mill, J.

    2017-01-01

    We develop the theory of Krull dimension for S4-algebras and Heyting algebras. This leads to the concept of modal Krull dimension for topological spaces. We compare modal Krull dimension to other well-known dimension functions, and show that it can detect differences between topological spaces that

  20. Adding dimension to cellular mechanotransduction: Advances in biomedical engineering of multiaxial cell-stretch systems and their application to cardiovascular biomechanics and mechano-signaling.

    Science.gov (United States)

    Friedrich, O; Schneidereit, D; Nikolaev, Y A; Nikolova-Krstevski, V; Schürmann, S; Wirth-Hücking, A; Merten, A L; Fatkin, D; Martinac, B

    2017-11-01

    Hollow organs (e.g. heart) experience pressure-induced mechanical wall stress sensed by molecular mechano-biosensors, including mechanosensitive ion channels, to translate into intracellular signaling. For direct mechanistic studies, stretch devices to apply defined extensions to cells adhered to elastomeric membranes have stimulated mechanotransduction research. However, most engineered systems only exploit unilateral cellular stretch. In addition, it is often taken for granted that stretch applied by hardware translates 1:1 to the cell membrane. However, the latter crucially depends on the tightness of the cell-substrate junction by focal adhesion complexes and is often not calibrated for. In the heart, (increased) hemodynamic volume/pressure load is associated with (increased) multiaxial wall tension, stretching individual cardiomyocytes in multiple directions. To adequately study cellular models of chronic organ distension on a cellular level, biomedical engineering faces challenges to implement multiaxial cell stretch systems that allow observing cell reactions to stretch during live-cell imaging, and to calibrate for hardware-to-cell membrane stretch translation. Here, we review mechanotransduction, cell stretch technologies from uni-to multiaxial designs in cardio-vascular research, and the importance of the stretch substrate-cell membrane junction. We also present new results using our IsoStretcher to demonstrate mechanosensitivity of Piezo1 in HEK293 cells and stretch-induced Ca 2+ entry in 3D-hydrogel-embedded cardiomyocytes. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Akt2 and nucleophosmin/B23 function as an oncogenic unit in human lung cancer cells

    International Nuclear Information System (INIS)

    Kim, Chung Kwon; Nguyen, Truong L.X.; Lee, Sang Bae; Park, Sang Bum; Lee, Kyung-Hoon; Cho, Sung-Woo; Ahn, Jee-Yin

    2011-01-01

    The signaling network of protein kinase B(PKB)/Akt has been implicated in survival of lung cancer cells. However, understanding the relative contribution of the different isoform of Akt network is nontrival. Here, we report that Akt2 is highly expressed in human lung adenocarcinoma cell line A549 cells. Suppression of Akt2 expression in A549 cells results in notable inhibition of cell poliferation, soft agar growth, and invasion, accompanying by a decrease of nucleophosmin/B23 protein. Overexpression of Akt1 restores cancerous growth of A549 cells in B23-knockdown (KD) cells while Akt2 overexpression did not restore proliferating potential in cells with downregulated B23, thus suggesting Akt2 requires B23 to drive proliferation of lung cancer cell. Loss of functional Akt2 and B23 has similar defects on cell proliferation, apoptotic resistance and cell cycle regulation, while loss of Akt1 has less defects on cell proliferation, survial and cell cycle progression in A549 cells. Moreover, overexpression of B23 rescues the proliferative block induced as a consequence of loss of Akt2. Thus our data suggest that Akt2/B23 functions as an oncogenic unit to drive tumorigenesis of A549 lung cancer cells.

  2. Interactive Dimensioning of Parametric Models

    KAUST Repository

    Kelly, T.

    2015-06-22

    We propose a solution for the dimensioning of parametric and procedural models. Dimensioning has long been a staple of technical drawings, and we present the first solution for interactive dimensioning: A dimension line positioning system that adapts to the view direction, given behavioral properties. After proposing a set of design principles for interactive dimensioning, we describe our solution consisting of the following major components. First, we describe how an author can specify the desired interactive behavior of a dimension line. Second, we propose a novel algorithm to place dimension lines at interactive speeds. Third, we introduce multiple extensions, including chained dimension lines, controls for different parameter types (e.g. discrete choices, angles), and the use of dimension lines for interactive editing. Our results show the use of dimension lines in an interactive parametric modeling environment for architectural, botanical, and mechanical models.

  3. Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials.

    Science.gov (United States)

    Amin Yavari, S; Ahmadi, S M; Wauthle, R; Pouran, B; Schrooten, J; Weinans, H; Zadpoor, A A

    2015-03-01

    Meta-materials are structures when their small-scale properties are considered, but behave as materials when their homogenized macroscopic properties are studied. There is an intimate relationship between the design of the small-scale structure and the homogenized properties of such materials. In this article, we studied that relationship for meta-biomaterials that are aimed for biomedical applications, otherwise known as meta-biomaterials. Selective laser melted porous titanium (Ti6Al4V ELI) structures were manufactured based on three different types of repeating unit cells, namely cube, diamond, and truncated cuboctahedron, and with different porosities. The morphological features, static mechanical properties, and fatigue behavior of the porous biomaterials were studied with a focus on their fatigue behavior. It was observed that, in addition to static mechanical properties, the fatigue properties of the porous biomaterials are highly dependent on the type of unit cell as well as on porosity. None of the porous structures based on the cube unit cell failed after 10(6) loading cycles even when the applied stress reached 80% of their yield strengths. For both other unit cells, higher porosities resulted in shorter fatigue lives for the same level of applied stress. When normalized with respect to their yield stresses, the S-N data points of structures with different porosities very well (R(2)>0.8) conformed to one single power law specific to the type of the unit cell. For the same level of normalized applied stress, the truncated cuboctahedron unit cell resulted in a longer fatigue life as compared to the diamond unit cell. In a similar comparison, the fatigue lives of the porous structures based on both truncated cuboctahedron and diamond unit cells were longer than that of the porous structures based on the rhombic dodecahedron unit cell (determined in a previous study). The data presented in this study could serve as a basis for design of porous biomaterials

  4. Direct Observation of High-Temperature Superconductivity in One-Unit-Cell FeSe Films

    International Nuclear Information System (INIS)

    Zhang Wen-Hao; Zhang Jin-Song; Li Fang-Sen; Guo Ming-Hua; Ding Hao; Tang Chen-Jia; Wang Qing-Yan; He Ke; Ji Shuai-Hua; Chen Xi; Sun Yi; Zhao Yan-Fei; Xing Ying; Wang Hui-Chao; Zhang Hui-Min; Peng Jun-Ping; Li Zhi; Wang Meng; Fujita Takeshi; Hirata Akihiko

    2014-01-01

    We prepared one-unit-cell (1-UC) thick FeSe films on insulating SrTiO 3 substrates with non-superconducting FeTe protection layers by molecular beam epitaxy for ex situ studies. By direct transport and magnetic measurements, we provide definitive evidence for high temperature superconductivity in the 1-UC FeSe films with an onset T C above 40 K and an extremely large critical current density J C ∼1.7×10 6 A/cm 2 at 2 K, which are much higher than T C ∼8 K and J C ∼10 4 A/cm 2 for bulk FeSe, respectively. Our work may pave the way to enhancing and tailoring superconductivity by interface engineering. (express letter)

  5. Flexible and elastic metamaterial absorber for low frequency, based on small-size unit cell

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Y. J.; Zheng, H. Y.; Kim, Y. J.; Lee, Y. P., E-mail: yplee@hanyang.ac.kr [Department of Physics and RINS, Hanyang University, Seoul 133-791 (Korea, Republic of); Rhee, J. Y. [Department of Physics, Sungkyunkwan University, Suwon (Korea, Republic of); Kang, J.-H. [Department of Nano and Electronic Physics, Kookmin University, Seoul (Korea, Republic of); Kim, K. W. [Department of Information Display, Sunmoon University, Asan (Korea, Republic of); Cheong, H. [Department of Physics, Sogang University, Seoul (Korea, Republic of); Kim, Y. H. [Infovion Inc., Seoul (Korea, Republic of)

    2014-07-28

    Using a planar and flexible metamaterial (MM), we obtained the low-frequency perfect absorption even with very small unit-cell size in snake-shape structure. These shrunken, deep-sub-wavelength and thin MM absorbers were numerically and experimentally investigated by increasing the inductance. The periodicity/thickness (the figure of merit for perfect absorption) is achieved to be 10 and 2 for single-snake-bar and 5-snake-bar structures, respectively. The ratio between periodicity and resonance wavelength (in mm) is close to 1/12 and 1/30 at 2 GHz and 400 MHz, respectively. The absorbers are specially designed for absorption peaks around 2 GHz and 400 MHz, which can be used for depressing the electromagnetic noise from everyday electronic devices and mobile phones.

  6. Mitigation of Unwanted Forward Narrow-band Radiation from PCBs with a Metamaterial Unit Cell

    DEFF Research Database (Denmark)

    Ruaro, Andrea; Thaysen, Jesper; Jakobsen, Kaj Bjarne

    2013-01-01

    Mitigation of EMI from a PCB is obtained through the use of a metamaterial unit cell. The focus is on the reduction of narrow-band radiation in the forward hemisphere when the resonant element is etched on a layer located between the source of radiation and the ground plane. As opposed to previous...... publications in the literature, the aim of this work is the application of a filter to scattered radiation, generalizing the former characterizations based solely upon transmission lines’ insertion loss. The radiating area accounts for traces and components placed on the top layer of a PCB and is simulated via...... a patch antenna. The study exhibits how the radiation pattern and the electric field on the patch antenna change within and outside the resonance bandwidth of the parasitic element. An EMC assessment provides experimental verification of the operating principle....

  7. Asymmetric lateral distribution of melanoma and Merkel cell carcinoma in the United States

    Science.gov (United States)

    Paulson, Kelly G; Iyer, Jayasri G; Nghiem, Paul

    2010-01-01

    Background A recent report suggested a trend towards more UV-linked skin cancers arising on the left rather than the right side of the body in the United States. Objective To test whether the reported incidences of two UV-linked skin cancers, malignant melanoma (MM) and Merkel cell carcinoma (MCC), are greater on the left than the right in the US. Methods MMs (n = 82,587) and MCCs (n = 2,384) occurring on the left or right side of the face, arm or leg that were reported in the SE*ER registry between 1986–2006 were included for analysis. Results MM and MCC were significantly more likely to present on the left than the right (p automobile UV exposure (approximately 20-fold stronger on the left than right arm) is a likely contributing factor. It may be prudent to remind skin cancer-prone individuals to take appropriate sun precautions when driving in an automobile. PMID:21514002

  8. Prognosis of Allogeneic Haematopoietic Stem Cell Recipients Admitted to the Intensive Care Unit

    DEFF Research Database (Denmark)

    Lindgaard, Sidsel Christy; Nielsen, Jonas; Lindmark, Anders

    2016-01-01

    BACKGROUND: Allogeneic haematopoietic stem cell transplantation (HSCT) is a procedure with inherent complications and intensive care may be necessary. We evaluated the short- and long-term outcomes of the HSCT recipients requiring admission to the intensive care unit (ICU). METHODS: We...... ventilation had a statistically significant effect on in-ICU (p = 0.02), 6-month (p = 0.049) and 1-year (p = 0.014) mortality. Renal replacement therapy also had a statistically significant effect on in-hospital (p = 0.038) and 6-month (p = 0.026) mortality. Short ICU admissions, i.e. ... to the ICU was confirmed in our study. Mechanical ventilation, renal replacement therapy and an ICU admission of ≥10 days were each risk factors for mortality in the first year after ICU admission....

  9. Drilling unit

    Energy Technology Data Exchange (ETDEWEB)

    Umanchik, N P; Demin, A V; Khrustalev, N N; Linnik, G N; Lovchev, S V; Rozin, M M; Sidorov, R V; Sokolov, S I; Tsaregradskiy, Yu P

    1981-01-01

    A drilling unit is proposed which includes a hydraulic lifter, hydraulic multiple-cylinder pump with valve distribution and sectional drilling pump with separators of the working and flushing fluid. In order to reduce metal consumption and the overall dimensions of the drilling unit, the working cavity of each cylinder of the hydraulic multiple-cylinder pump is equipped with suction and injection valves and is hydraulically connected to the working cavity by one of the sections of the drilling pump.

  10. Planar conjugated polymers containing 9,10-disubstituted phenanthrene units for efficient polymer solar cells.

    Science.gov (United States)

    Li, Guangwu; Kang, Chong; Li, Cuihong; Lu, Zhen; Zhang, Jicheng; Gong, Xue; Zhao, Guangyao; Dong, Huanli; Hu, Wenping; Bo, Zhishan

    2014-06-01

    Four novel conjugated polymers (P1-4) with 9,10-disubstituted phenanthrene (PhA) as the donor unit and 5,6-bis(octyloxy)benzothiadiazole as the acceptor unit are synthesized and characterized. These polymers are of medium bandgaps (2.0 eV), low-lying HOMO energy levels (below -5.3 eV), and high hole mobilities (in the range of 3.6 × 10(-3) to 0.02 cm(2) V(-1) s(-1) ). Bulk heterojunction (BHJ) polymer solar cells (PSCs) with P1-4:PC71 BM blends as the active layer and an alcohol-soluble fullerene derivative (FN-C60) as the interfacial layer between the active layer and cathode give the best power conversion efficiency (PCE) of 4.24%, indicating that 9,10-disubstituted PhA are potential donor materials for high-efficiency BHJ PSCs. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties

    Directory of Open Access Journals (Sweden)

    Seyed Mohammad Ahmadi

    2015-04-01

    Full Text Available It is known that the mechanical properties of bone-mimicking porous biomaterials are a function of the morphological properties of the porous structure, including the configuration and size of the repeating unit cell from which they are made. However, the literature on this topic is limited, primarily because of the challenge in fabricating porous biomaterials with arbitrarily complex morphological designs. In the present work, we studied the relationship between relative density (RD of porous Ti6Al4V EFI alloy and five compressive properties of the material, namely elastic gradient or modulus (Es20–70, first maximum stress, plateau stress, yield stress, and energy absorption. Porous structures with different RD and six different unit cell configurations (cubic (C, diamond (D, truncated cube (TC, truncated cuboctahedron (TCO, rhombic dodecahedron (RD, and rhombicuboctahedron (RCO were fabricated using selective laser melting. Each of the compressive properties increased with increase in RD, the relationship being of a power law type. Clear trends were seen in the influence of unit cell configuration and porosity on each of the compressive properties. For example, in terms of Es20–70, the structures may be divided into two groups: those that are stiff (comprising those made using C, TC, TCO, and RCO unit cell and those that are compliant (comprising those made using D and RD unit cell.

  12. Cultural dimensions of learning

    Science.gov (United States)

    Eyford, Glen A.

    1990-06-01

    How, what, when and where we learn is frequently discussed, as are content versus process, or right brain versus left brain learning. What is usually missing is the cultural dimension. This is not an easy concept to define, but various aspects can be identified. The World Decade for Cultural Development emphasizes the need for a counterbalance to a quantitative, economic approach. In the last century poets also warned against brutalizing materialism, and Sorokin and others have described culture more recently in terms of cohesive basic values expressed through aesthetics and institutions. Bloom's taxonomy incorporates the category of affective learning, which internalizes values. If cultural learning goes beyond knowledge acquisition, perhaps the surest way of understanding the cultural dimension of learning is to examine the aesthetic experience. This can use myths, metaphors and symbols, and to teach and learn by using these can help to unlock the human potential for vision and creativity.

  13. Dimensions of Openness

    DEFF Research Database (Denmark)

    Dalsgaard, Christian; Thestrup, Klaus

    2015-01-01

    The objective of the paper is to present a pedagogical approach to openness. The paper develops a framework for understanding the pedagogical opportunities of openness in education. Based on the pragmatism of John Dewey and sociocultural learning theory, the paper defines openness in education...... as a matter of engaging educational activities in sociocultural practices of a surrounding society. Openness is not only a matter of opening up the existing, but of developing new educational practices that interact with society. The paper outlines three pedagogical dimensions of openness: transparency...... practices. Openness as joint engagement in the world aims at establishing interdependent collaborative relationships between educational institutions and external practices. To achieve these dimensions of openness, educational activities need to change and move beyond the course as the main format...

  14. Introduction to Extra Dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Rizzo, Thomas G.; /SLAC

    2010-04-29

    Extra dimensions provide a very useful tool in addressing a number of the fundamental problems faced by the Standard Model. The following provides a very basic introduction to this very broad subject area as given at the VIII School of the Gravitational and Mathematical Physics Division of the Mexican Physical Society in December 2009. Some prospects for extra dimensional searches at the 7 TeV LHC with {approx}1 fb{sup -1} of integrated luminosity are provided.

  15. Physics in few dimensions

    International Nuclear Information System (INIS)

    Emery, V.J.

    1981-03-01

    This article is a qualitative account of some aspects of physics in few dimensions, and its relationship to nonlinear field theories. After a survey of materials and some of the models that have been used to describe them, the various methods of solution are compared and contrasted. The roles of exact results, operator representations and the renormalization group transformation are described, and a uniform picture of the behavior of low-dimensional systems is presented

  16. Inflation from extra dimensions

    International Nuclear Information System (INIS)

    Barr, S.M.

    1984-01-01

    Recently there has been growing interest (1) in the possibility that the universe could have more than four dimensions. Aside from any light this may shed on problems in particle physics, if true it would undoubtedly have important implications for early cosmology. A rather speculative but very appealing possibility suggested by D. Sahdev and by E. Alvarez and B. Gavela is that the gravitational collapse of extra spatial dimensions could drive an inflation of ordinary space. This kind of inflationary cosmology would be quite different from the inflationary cosmologies now so intensively studied which are supposed to result from changes in vacuum energy during phase transitions in the early universe. In our work we examine the physics of these Kaluza-Klein inflationary cosmologies and come to three main conclusions. (1) It is desirable to have many extra dimensions, many being of order forty or fifty. (2) For models which give a realistically large inflation almost all of this inflation occurs in a period when quantum gravity is certainly important. This means that Einstein's equations cannot be used to calculate the details of this inflationary period. (3) Under plausible assumptions one may argue from the second law of thermodynamics that given appropriate initial conditions a large inflation will occur even when details of the inflationary phase cannot be calculated classically

  17. Two-Dimensional Simulation of Mass Transfer in Unitized Regenerative Fuel Cells under Operation Mode Switching

    Directory of Open Access Journals (Sweden)

    Lulu Wang

    2016-01-01

    Full Text Available A two-dimensional, single-phase, isothermal, multicomponent, transient model is built to investigate the transport phenomena in unitized regenerative fuel cells (URFCs under the condition of switching from the fuel cell (FC mode to the water electrolysis (WE mode. The model is coupled with an electrochemical reaction. The proton exchange membrane (PEM is selected as the solid electrolyte of the URFC. The work is motivated by the need to elucidate the complex mass transfer and electrochemical process under operation mode switching in order to improve the performance of PEM URFC. A set of governing equations, including conservation of mass, momentum, species, and charge, are considered. These equations are solved by the finite element method. The simulation results indicate the distributions of hydrogen, oxygen, water mass fraction, and electrolyte potential response to the transient phenomena via saltation under operation mode switching. The hydrogen mass fraction gradients are smaller than the oxygen mass fraction gradients. The average mass fractions of the reactants (oxygen and hydrogen and product (water exhibit evident differences between each layer in the steady state of the FC mode. By contrast, the average mass fractions of the reactant (water and products (oxygen and hydrogen exhibit only slight differences between each layer in the steady state of the WE mode. Under either the FC mode or the WE mode, the duration of the transient state is only approximately 0.2 s.

  18. Unit cell determination of epitaxial thin films based on reciprocal space vectors by high-resolution X-ray diffractometry

    OpenAIRE

    Yang, Ping; Liu, Huajun; Chen, Zuhuang; Chen, Lang; Wang, John

    2013-01-01

    A new approach, based on reciprocal space vectors (RSVs), is developed to determine Bravais lattice types and accurate lattice parameters of epitaxial thin films by high-resolution X-ray diffractometry (HR-XRD). The lattice parameters of single crystal substrates are employed as references to correct the systematic experimental errors of RSVs of thin films. The general procedure is summarized, involving correction of RSVs, derivation of raw unit cell, subsequent conversion to the Niggli unit ...

  19. The Social Dimension of EU Trade Policies

    DEFF Research Database (Denmark)

    Manners, Ian

    2009-01-01

    will ask how the EU initiatives in this area could increase the legitimacy of the ‘trade and social linkage' in international politics and economics from a normative power perspective. Finally, the article concludes by suggesting a more holistic approach to the promotion of the social dimension......'s social dimension in trade relations - human rights versus welfare concerns and exclusive competence versus lack of competence. These questions and tensions are rendered more methodologically problematic by the existence and activities of other actors and trading powers, such as the International Labour...... Organisation (ILO) and the World Trade Organization (WTO), as well as the United States and China, for example. The rest of the article will provide refl ections on the ideas raised in the special issue from a normative power perspective in six sections. First, it will elaborate on the role of labour rights...

  20. RNAi High-Throughput Screening of Single- and Multi-Cell-Type Tumor Spheroids: A Comprehensive Analysis in Two and Three Dimensions.

    Science.gov (United States)

    Fu, Jiaqi; Fernandez, Daniel; Ferrer, Marc; Titus, Steven A; Buehler, Eugen; Lal-Nag, Madhu A

    2017-06-01

    The widespread use of two-dimensional (2D) monolayer cultures for high-throughput screening (HTS) to identify targets in drug discovery has led to attrition in the number of drug targets being validated. Solid tumors are complex, aberrantly growing microenvironments that harness structural components from stroma, nutrients fed through vasculature, and immunosuppressive factors. Increasing evidence of stromally-derived signaling broadens the complexity of our understanding of the tumor microenvironment while stressing the importance of developing better models that reflect these interactions. Three-dimensional (3D) models may be more sensitive to certain gene-silencing events than 2D models because of their components of hypoxia, nutrient gradients, and increased dependence on cell-cell interactions and therefore are more representative of in vivo interactions. Colorectal cancer (CRC) and breast cancer (BC) models composed of epithelial cells only, deemed single-cell-type tumor spheroids (SCTS) and multi-cell-type tumor spheroids (MCTS), containing fibroblasts were developed for RNAi HTS in 384-well microplates with flat-bottom wells for 2D screening and round-bottom, ultra-low-attachment wells for 3D screening. We describe the development of a high-throughput assay platform that can assess physiologically relevant phenotypic differences between screening 2D versus 3D SCTS, 3D SCTS, and MCTS in the context of different cancer subtypes. This assay platform represents a paradigm shift in how we approach drug discovery that can reduce the attrition rate of drugs that enter the clinic.

  1. [Christian dimension of suffering].

    Science.gov (United States)

    Kubik, K

    1999-01-01

    Human existence is marked by imperfection, whose expression--among other things--is suffering. The problem of answering the question about the meaning of suffering for human life in its entirety is of great significance in philosophy and theology. In the Old Testament it meant God's punishment for the evil done by man. In Christianity this bleak notion of suffering has found a new dimension--suffering is creative, redemptive in character; it enables a man to surpass his limits. The understanding of suffering and its sense has a profound meaning in building a suitable attitude of a sick person towards his own weakness.

  2. Public Value Dimensions

    DEFF Research Database (Denmark)

    Andersen, lotte bøgh; Beck Jørgensen, Torben; Kjeldsen, Anne-Mette

    2012-01-01

    Further integration of the public value literature with other strands of literature within Public Administration necessitates a more specific classification of public values. This paper applies a typology linked to organizational design principles, because this is useful for empirical public...... administration studies. Based on an existing typology of modes of governance, we develop a classification and test it empirically, using survey data from a study of the values of 501 public managers. We distinguish between seven value dimensions (the public at large, rule abidance, societal interests, budget...... the integration between the public value literature and other parts of the Public Administration discipline....

  3. Dimensions of energy efficiency

    International Nuclear Information System (INIS)

    Ramani, K.V.

    1992-01-01

    In this address the author describes three dimensions of energy efficiency in order of increasing costs: conservation, resource and technology substitution, and changes in economic structure. He emphasizes the importance of economic rather than environmental rationales for energy efficiency improvements in developing countries. These countries do not place high priority on the problems of global climate change. Opportunities for new technologies may exist in resource transfer, new fuels and, possibly, small reactors. More research on economic and social impacts of technologies with greater sensitivity to user preferences is needed

  4. One dimension harmonic oscillator

    International Nuclear Information System (INIS)

    Cohen-Tannoudji, Claude; Diu, Bernard; Laloe, Franck.

    1977-01-01

    The importance of harmonic oscillator in classical and quantum physics, eigenvalues and eigenstates of hamiltonian operator are discussed. In complement are presented: study of some physical examples of harmonic oscillators; study of stationnary states in the /x> representation; Hermite polynomials; resolution of eigenvalue equation of harmonic oscillator by polynomial method; isotope harmonic oscillator with three dimensions; charged harmonic oscillator in uniform electric field; quasi classical coherent states of harmonic oscillator; eigenmodes of vibration of two coupled harmonic oscillators; vibration modus of a continuous physical system (application to radiation: photons); vibration modus of indefinite linear chain of coupled harmonic oscillators (phonons); one-dimensional harmonic oscillator in thermodynamic equilibrium at temperature T [fr

  5. Inhomogeneous compact extra dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Bronnikov, K.A. [Center of Gravity and Fundamental Metrology, VNIIMS, 46 Ozyornaya st., Moscow 119361 (Russian Federation); Budaev, R.I.; Grobov, A.V.; Dmitriev, A.E.; Rubin, Sergey G., E-mail: kb20@yandex.ru, E-mail: buday48@mail.ru, E-mail: alexey.grobov@gmail.com, E-mail: alexdintras@mail.ru, E-mail: sergeirubin@list.ru [National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), 115409 Moscow (Russian Federation)

    2017-10-01

    We show that an inhomogeneous compact extra space possesses two necessary features— their existence does not contradict the observable value of the cosmological constant Λ{sub 4} in pure f ( R ) theory, and the extra dimensions are stable relative to the 'radion mode' of perturbations, the only mode considered. For a two-dimensional extra space, both analytical and numerical solutions for the metric are found, able to provide a zero or arbitrarily small Λ{sub 4}. A no-go theorem has also been proved, that maximally symmetric compact extra spaces are inconsistent with 4D Minkowski space in the framework of pure f ( R ) gravity.

  6. Red blood cell-derived microparticles isolated from blood units initiate and propagate thrombin generation.

    Science.gov (United States)

    Rubin, Olivier; Delobel, Julien; Prudent, Michel; Lion, Niels; Kohl, Kid; Tucker, Erik I; Tissot, Jean-Daniel; Angelillo-Scherrer, Anne

    2013-08-01

    Red blood cell-derived microparticles (RMPs) are small phospholipid vesicles shed from RBCs in blood units, where they accumulate during storage. Because microparticles are bioactive, it could be suggested that RMPs are mediators of posttransfusion complications or, on the contrary, constitute a potential hemostatic agent. This study was performed to establish the impact on coagulation of RMPs isolated from blood units. Using calibrated automated thrombography, we investigated whether RMPs affect thrombin generation (TG) in plasma. We found that RMPs were not only able to increase TG in plasma in the presence of a low exogenous tissue factor (TF) concentration, but also to initiate TG in plasma in absence of exogenous TF. TG induced by RMPs in the absence of exogenous TF was neither affected by the presence of blocking anti-TF nor by the absence of Factor (F)VII. It was significantly reduced in plasma deficient in FVIII or F IX and abolished in FII-, FV-, FX-, or FXI-deficient plasma. TG was also totally abolished when anti-XI 01A6 was added in the sample. Finally, neither Western blotting, flow cytometry, nor immunogold labeling allowed the detection of traces of TF antigen. In addition, RMPs did not comprise polyphosphate, an important modulator of coagulation. Taken together, our data show that RMPs have FXI-dependent procoagulant properties and are able to initiate and propagate TG. The anionic surface of RMPs might be the site of FXI-mediated TG amplification and intrinsic tenase and prothrombinase complex assembly. © 2012 American Association of Blood Banks.

  7. Quantitative analysis of Plasmodium ookinete motion in three dimensions suggests a critical role for cell shape in the biomechanics of malaria parasite gliding motility.

    Science.gov (United States)

    Kan, Andrey; Tan, Yan-Hong; Angrisano, Fiona; Hanssen, Eric; Rogers, Kelly L; Whitehead, Lachlan; Mollard, Vanessa P; Cozijnsen, Anton; Delves, Michael J; Crawford, Simon; Sinden, Robert E; McFadden, Geoffrey I; Leckie, Christopher; Bailey, James; Baum, Jake

    2014-05-01

    Motility is a fundamental part of cellular life and survival, including for Plasmodium parasites--single-celled protozoan pathogens responsible for human malaria. The motile life cycle forms achieve motility, called gliding, via the activity of an internal actomyosin motor. Although gliding is based on the well-studied system of actin and myosin, its core biomechanics are not completely understood. Currently accepted models suggest it results from a specifically organized cellular motor that produces a rearward directional force. When linked to surface-bound adhesins, this force is passaged to the cell posterior, propelling the parasite forwards. Gliding motility is observed in all three life cycle stages of Plasmodium: sporozoites, merozoites and ookinetes. However, it is only the ookinetes--formed inside the midgut of infected mosquitoes--that display continuous gliding without the necessity of host cell entry. This makes them ideal candidates for invasion-free biomechanical analysis. Here we apply a plate-based imaging approach to study ookinete motion in three-dimensional (3D) space to understand Plasmodium cell motility and how movement facilitates midgut colonization. Using single-cell tracking and numerical analysis of parasite motion in 3D, our analysis demonstrates that ookinetes move with a conserved left-handed helical trajectory. Investigation of cell morphology suggests this trajectory may be based on the ookinete subpellicular cytoskeleton, with complementary whole and subcellular electron microscopy showing that, like their motion paths, ookinetes share a conserved left-handed corkscrew shape and underlying twisted microtubular architecture. Through comparisons of 3D movement between wild-type ookinetes and a cytoskeleton-knockout mutant we demonstrate that perturbation of cell shape changes motion from helical to broadly linear. Therefore, while the precise linkages between cellular architecture and actomyosin motor organization remain unknown, our

  8. 1. Dimensions of sustainable development

    International Nuclear Information System (INIS)

    Repetto, R.

    1992-01-01

    This chapter discusses the following topics: the concept of sustainable development; envisioning sustainable development (economic dimensions, human dimensions, environmental dimensions, technological dimensions); policy implications (economic policies, people-oriented policies, environmental policies, creating sustainable systems); and global issues (effect of war on development and the environment and the debt burden). This chapter also introduces the case studies by discussing the levels of economic development and comparing key trends (economic growth, human development, population growth, and energy use)

  9. Oropharyngeal squamous cell carcinoma incidence and mortality trends in the United States, 1973-2013.

    Science.gov (United States)

    Megwalu, Uchechukwu C; Sirjani, Davud; Devine, Erin E

    2017-10-31

    To analyze oropharyngeal squamous cell carcinoma incidence and mortality trends in the United States for the years 1973 through 2013. Cross-sectional study using a large population-based cancer database. Data on incidence and mortality rates were extracted from the Surveillance, Epidemiology, and End Results (SEER) 9 Database. Annual percentage change in rates was calculated using Joinpoint regression analysis (National Cancer Institute, Bethesda, MD). Incidence rates increased (annual percent change [APC]; 1.52, 95% confidence interval [CI] 0.17 to 2.88) from 1973 to 1983, remained stable (APC -0.52, 95% CI -1.30 to 0.26) from 1983 to 1997, and increased (APC 1.32, 95% CI 0.83 to 1.81) from 1997 to 2013. Overall, incidence rates increased for males (APC 0.73, 95% CI 0.22 to 1.25) but not females (APC -0.77, 95% CI -0.68 to 0.82). Incidence rates increased in the white population (APC 0.79, 95% CI 0.33 to 1.25) but decreased in the black population (APC -0.72, 95% CI -1.41 to -0.02). The incidence rates increased for tongue-base tumors (APC 1.17, 95% CI 0.42 to 1.92) and tonsil tumors (APC 0.47, 95% CI 1.10 to 4.96) but decreased for other sites. Incidence-based mortality decreased (APC -0.78, 95% CI -1.13 to -0.42) from 1993 to 2013. Oropharyngeal squamous cell carcinoma incidence rates increased in a nonlinear fashion from 1973 to 2013, whereas mortality rates declined. This, along with variation in trends by demographic and tumor factors, suggest that human papilloma virus is the main driver of the recent rise in incidence. 2b. Laryngoscope, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

  10. Progress in human embryonic stem cell research in the United States between 2001 and 2010.

    Directory of Open Access Journals (Sweden)

    Keyvan Vakili

    Full Text Available On August 9th, 2001, the federal government of the United States announced a policy restricting federal funds available for research on human embryonic stem cell (hESCs out of concern for the "vast ethical mine fields" associated with the creation of embryos for research purposes. Until the policy was repealed on March 9th, 2009, no U.S. federal funds were available for research on hESCs extracted after August 9, 2001, and only limited federal funds were available for research on a subset of hESC lines that had previously been extracted. This paper analyzes how the 2001 U.S. federal funding restrictions influenced the quantity and geography of peer-reviewed journal publications on hESC. The primary finding is that the 2001 policy did not have a significant aggregate effect on hESC research in the U.S. After a brief lag in early 2000s, U.S. hESC research maintained pace with other areas of stem cell and genetic research. The policy had several other consequences. First, it was tied to increased hESC research funding within the U.S. at the state level, leading to concentration of related activities in a relatively small number of states. Second, it stimulated increased collaborative research between US-based scientists and those in countries with flexible policies toward hESC research (including Canada, the U.K., Israel, China, Spain, and South Korea. Third, it encouraged independent hESC research in countries without restrictions.

  11. A cost effective model for appropriate administration of red cell units and salvaging un-transfused red cell units by using temperature sensitive indicators for blood component transportation in a hospital setting

    Directory of Open Access Journals (Sweden)

    Aseem K Tiwari

    2015-01-01

    Full Text Available Background: A rule called "30-min rule" defines that red cell unit cannot be used if it has been out of blood bank refrigerator for over 30 min. This rule is useful to guide initiation of transfusion, but is inadequate for deciding whether to reuse or discard units received-back at blood transfusion services (BTS. A simple cost-effective temperature-sensitive indicator was evaluated to decide upon reuse (cold chain was uninterrupted or discard (where cold chain was interrupted in a simulation exercise. Materials and Methods: Temperature-sensitive indicators TH-F™ that irreversibly changed color from white to red demonstrated that heat excursion has occurred and the cumulative temperature has exceeded 10°C for over 30 min, were used in outdated red cells for simulating units, which are not used and received-back. These units were also tagged with a standard temperature monitoring device, which was a re-usable credit card sized device, which would log the actual time and temperature. In few units percent hemolysis was also calculated. Results: Statistically insignificant elevation in average temperature was noted in 102 simulated units at the time of return to BTS (Δ 0.04°C, despite the fact that these units were in the transport box for over 4 h. The average supernatant hemoglobin in these units was 0.24%, much below the prescribed threshold. Conclusion: Transportation of blood in controlled conditions with temperature-sensitive indicator is a cost-effective model to save blood, a precious human resource.

  12. The role of total cell-free DNA in predicting outcomes among trauma patients in the intensive care unit

    DEFF Research Database (Denmark)

    Gögenur, Mikail; Burcharth, Jakob; Gögenur, Ismail

    2017-01-01

    searched Pubmed, Embase, Scopus and the Cochrane Central Register for Controlled Trials and reference lists of relevant articles for studies that assessed the prognostic value of cell-free DNA detection in trauma patients in the intensive care unit. Outcomes of interest included survival, posttraumatic...

  13. Quantum vortex fluid in two dimensions

    International Nuclear Information System (INIS)

    Chudnovsky, E.M.

    1995-01-01

    It is argued that in two dimensions the high-field zero-temperature phase of a type-II superconductor can be quantum vortex fluid. The average intervortex spacing in this phase takes discrete values, leading to macroscopic steps in the total flux through the superconductor on the applied magnetic field. In the absence of dissipation, the Hall conductivity is quantized in units of 4e 2 /πℎ

  14. Fractal Dimension and the Cantor Set

    Indian Academy of Sciences (India)

    IAS Admin

    S Smith. dimension'). We now give two examples of such objects to show that this notion is not vacuous. Cantor Set. Start with the unit interval [0, 1]. Delete the open mid- dle third of the segment, leaving behind two closed seg- ments: [0, 1/3] and [2/3, 1]. Note that, each has length. 1/3. Repeat the same construction for each ...

  15. HTR-PROTEUS benchmark calculations. Pt. 1. Unit cell results LEUPRO-1 and LEUPRO-2

    International Nuclear Information System (INIS)

    Hogenbirk, A.; Stad, R.C.L. van der; Janssen, A.J.; Klippel, H.T.; Kuijper, J.C.

    1995-09-01

    In the framework of the IAEA Co-ordinated Research Programme (CRP) on 'Validation of Safety Related Physics Calculations for Low-Enriched (LEU) HTGRs' calculational benchmarks are performed on the basis of LEU-HTR pebble-bed critical experiments carried out in the PROTEUS facility at PSI, Switzerland. Of special interest is the treatment of the double heterogeneity of the fuel and the spherical fuel elements of these pebble bed core configurations. Also of interest is the proper calculation of the safety related physics parameters like the effect of water ingress and control rod worth. This document describes the ECN results of the LEUPRO-1 and LEUPRO-2 unitcell calculations performed with the codes WIMS-E, SCALE-4 and MCNP4A. Results of the LEUPRO-1 unit cell with 20% water ingress in the void is also reported for both the single and the double heterogeneous case. Emphasis is put on the intercomparison of the results obtained by the deterministic codes WIMS-E and SCALE-4, and the Monte Carlo code MCNP4A. The LEUPRO whole core calculations will be reported later. (orig.)

  16. Results and analysis of saltstone cores taken from saltstone disposal unit cell 2A

    Energy Technology Data Exchange (ETDEWEB)

    Reigel, M. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hill, K. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-03-01

    As part of an ongoing Performance Assessment (PA) Maintenance Plan, Savannah River Remediation (SRR) has developed a sampling and analyses strategy to facilitate the comparison of field-emplaced samples (i.e., saltstone placed and cured in a Saltstone Disposal Unit (SDU)) with samples prepared and cured in the laboratory. The primary objectives of the Sampling and Analyses Plan (SAP) are; (1) to demonstrate a correlation between the measured properties of laboratory-prepared, simulant samples (termed Sample Set 3), and the field-emplaced saltstone samples (termed Sample Set 9), and (2) to validate property values assumed for the Saltstone Disposal Facility (SDF) PA modeling. The analysis and property data for Sample Set 9 (i.e. six core samples extracted from SDU Cell 2A (SDU2A)) are documented in this report, and where applicable, the results are compared to the results for Sample Set 3. Relevant properties to demonstrate the aforementioned objectives include bulk density, porosity, saturated hydraulic conductivity (SHC), and radionuclide leaching behavior.

  17. Combined UMC- DFT prediction of electron-hole coupling in unit cells of pentacene crystals.

    Science.gov (United States)

    Leal, Luciano Almeida; de Souza Júnior, Rafael Timóteo; de Almeida Fonseca, Antonio Luciano; Ribeiro Junior, Luiz Antonio; Blawid, Stefan; da Silva Filho, Demetrio Antonio; da Cunha, Wiliam Ferreira

    2017-05-01

    Pentacene is an organic semiconductor that draws special attention from the scientific community due to the high mobility of its charge carriers. As electron-hole interactions are important aspects in the regard of such property, a computationally inexpensive method to predict the coupling between these quasi-particles is highly desired. In this work, we propose a hybrid methodology of combining Uncoupled Monte Carlo Simulations (UMC) and Density functional Theory (DFT) methodologies to obtain a good compromise between computational feasibility and accuracy. As a first step in considering a Pentacene crystal, we describe its unit cell: the Pentacene Dimer. Because many conformations can be encountered for the dimer and considering the complexity of the system, we make use of UMC in order to find the most probable structures and relative orientations for the Pentacene-Pentacene complex. Following, we carry out electronic structure calculations in the scope of DFT with the goal of describing the electron-hole coupling on the most probable configurations obtained by UMC. The comparison of our results with previously reported data on the literature suggests that the methodology is well suited for describing transfer integrals of organic semiconductors. The observed accuracy together with the smaller computational cost required by our approach allows us to conclude that such methodology might be an important tool towards the description of systems with higher complexity.

  18. New solar cell and clean unit system platform (CUSP) for earth and environmental science

    Science.gov (United States)

    Ishibashi, A.; Matsuoka, T.; Enomoto, R.; Yasutake, M.

    2017-11-01

    We have investigated InGaN-based multi-striped orthogonal photon-photocarrier propagation solar cell (MOP3SC) in which sunlight propagates in a direction being orthogonal to that of photocarriers generated by the sunlight. Thanks to the orthogonality, in MOP3SC, absorption of the sunlight and collection of the photocarriers can be simultaneously and independently optimized with no trade-off. Furthermore, by exploiting the degree of freedom along the photon propagation and using multi-semiconductor stripes in which the incoming photons first encounter the widest gap semiconductor, and the narrowest at last, we can convert the whole solar spectrum into electricity resulting in the high conversion efficiency. For processing MOP3SC, we have developed Clean Unit System Platform (CUSP), which turns out to be able to serve as clean versatile environment having low power-consumption and high cost-performance. CUSP is suitable not only for processing devices, but also for cross-disciplinary fields, including medical/hygienic applications.

  19. Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells : The Mechanical and Morphological Properties

    NARCIS (Netherlands)

    Ahmadi, S.M.; Yavari, S.A.; Wauthle, R.; Pouran, B.; Schrooten, J.; Weinans, H.; Zadpoor, A.A.

    2015-01-01

    It is known that the mechanical properties of bone-mimicking porous biomaterials are a function of the morphological properties of the porous structure, including the configuration and size of the repeating unit cell from which they are made. However, the literature on this topic is limited,

  20. Development of a unit suitable for corrosion monitoring in district heating systems. Experiences with the LOCOR-cell test method

    DEFF Research Database (Denmark)

    Andersen, Asbjørn; Hilbert, Lisbeth Rischel

    2004-01-01

    A by-pass unit suitable for placement of a number of different probes for corrosion monitoring has been designed. Also measurements of water parameters are allowed in a side stream from the unit. The project is a part of the Nordic Innovation Fund project KORMOF. The by-pass unit has been installed...... in 6 pressurised circulating heating systems and in one cooling system. 7 different corrosion monitoring methods have been used to study corrosion rates and types in dependency of water chemistry. This paper describes the design of the by-pass unit including water analysis methods. It also describes...... the purpose, background and gained results of one of the used monitoring techniques, the crevice corrosion measurements obtained by the LOCOR-Cell„§. The crevice corrosion cell was developed by FORCE Technology in a previous district heating project financed by Nordic Industrial Fund (1)(2). Results from...

  1. The Application of Load-cell Technique in the Study of Armour Unit Responses to Impact Loads Tests

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Liu, Z.

    1995-01-01

    The slender, complex types of armour units, such as Tetrapods and Dolosse are widely used for rubble mound breakwaters. Many of the recent failures of such structures were caused by unforeseen early breakage of the units, thus revealing an in balance between the strength (structural integrity......) of the units and the hydraulic stability (resistance to displacements) of the armour layers. Breakage is caused by stresses from static, pulsating and impact loads. Impact load generated stresses are difficult to investigate due to non-linear scaling laws. The paper describes a method by which impact loads on....... slender armour units can be studied. by load-cell technique. Moreover, the paper presents DoJos design diagrams for the prediction of both breakage and hydraulic stability...

  2. Risk factors for death in 632 patients with sickle cell disease in the United States and United Kingdom.

    Directory of Open Access Journals (Sweden)

    Mark T Gladwin

    Full Text Available The role of pulmonary hypertension as a cause of mortality in sickle cell disease (SCD is controversial.We evaluated the relationship between an elevated estimated pulmonary artery systolic pressure and mortality in patients with SCD. We followed patients from the walk-PHaSST screening cohort for a median of 29 months. A tricuspid regurgitation velocity (TRV≥ 3.0 m/s cuttof, which has a 67-75% positive predictive value for mean pulmonary artery pressure ≥ 25 mm Hg was used. Among 572 subjects, 11.2% had TRV ≥ 3.0 m/sec. Among 582 with a measured NT-proBNP, 24.1% had values ≥ 160 pg/mL. Of 22 deaths during follow-up, 50% had a TRV ≥ 3.0 m/sec. At 24 months the cumulative survival was 83% with TRV ≥ 3.0 m/sec and 98% with TRV 47 years, male gender, chronic transfusions, WHO class III-IV, increased hemolytic markers, ferritin and creatinine were also associated with increased risk of death.A TRV ≥ 3.0 m/sec occurs in approximately 10% of individuals and has the highest risk for death of any measured variable. The study is registered in ClinicalTrials.gov with identifier: NCT00492531.

  3. Flowing to four dimensions

    International Nuclear Information System (INIS)

    Dudas, Emilian; Papineau, Chloe; Rubakov, Valery

    2006-01-01

    We analyze the properties of a model with four-dimensional brane-localized Higgs type potential of a six dimensional scalar field satisfying the Dirichlet boundary condition on the boundary of a transverse two-dimensional compact space. The regularization of the localized couplings generates classical renormalization group running. A tachyonic mass parameter grows in the infrared, in analogy with the QCD gauge coupling in four dimensions. We find a phase transition at a critical value of the bare mass parameter such that the running mass parameter becomes large in the infrared precisely at the compactification scale. Below the critical coupling, the theory is in symmetric phase, whereas above it spontaneous symmetry breaking occurs. Close to the phase transition point there is a very light mode in the spectrum. The massive Kaluza-Klein spectrum at the critical coupling becomes independent of the UV cutoff

  4. Dimensions of trust

    DEFF Research Database (Denmark)

    Frederiksen, Morten

    2012-01-01

    Georg Simmel is the seminal author on trust within sociology, but though inspired by Simmel, subsequent studies of intersubjective trust have failed to address Simmel’s suggestion that trust is as differentiated as the social relations of which it is part. Rather, trust has been studied within...... limited sets of exchange or work relations. This article revisits Simmel’s concept of trust as social form in order to investigate this differentiation. From an interview study, the differentiation and limits of trust are analysed within different types of social relations. Trust is found to vary greatly...... in scope and mode influenced by the intersecting dimensions of relations, objects and situations. Furthermore, trust exists between an outer threshold of expected deceit and an inner threshold of confident reliance. The findings from the qualitative study contribute new knowledge on the diversity of trust...

  5. The Regional Dimension

    DEFF Research Database (Denmark)

    Eskjær, Mikkel Fugl

    2013-01-01

    is largely dependent on regional media systems, yet the role this regional dimension plays has been largely overlooked. This article presents a comparative study of climate-change coverage in three geo-cultural regions, The Middle East, Scandinavia, and North America, and explores the link between global......Global perspectives and national approaches have dominated studies of climate-change communication, reflecting the global nature of climate change as well as the traditional research focus on national media systems. In the absence of a global public sphere, however, transnational issue attention...... climate-change communication and regional media systems. It finds that regional variations in climate-change communication carry important communicative implications concerning perceptions of climate change's relevance and urgency...

  6. Method card design dimensions

    DEFF Research Database (Denmark)

    Wölfel, Christiane; Merritt, T.

    2013-01-01

    There are many examples of cards used to assist or provide structure to the design process, yet there has not been a thorough articulation of the strengths and weaknesses of the various examples. We review eighteen card-based design tools in order to understand how they might benefit designers....... The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...... and highlights unexplored areas in the design space. The paper concludes with recommendations for the future development of card-based methods for the field of interaction design....

  7. Correlation dimension of financial market

    Science.gov (United States)

    Nie, Chun-Xiao

    2017-05-01

    In this paper, correlation dimension is applied to financial data analysis. We calculate the correlation dimensions of some real market data and find that the dimensions are significantly smaller than those of the simulation data based on geometric Brownian motion. Based on the analysis of the Chinese and US stock market data, the main results are as follows. First, by calculating three data sets for the Chinese and US market, we find that large market volatility leads to a significant decrease in the dimensions. Second, based on 5-min stock price data, we find that the Chinese market dimension is significantly larger than the US market; this shows a significant difference between the two markets for high frequency data. Third, we randomly extract stocks from a stock set and calculate the correlation dimensions, and find that the average value of these dimensions is close to the dimension of the original set. In addition, we analyse the intuitional meaning of the relevant dimensions used in this paper, which are directly related to the average degree of the financial threshold network. The dimension measures the speed of the average degree that varies with the threshold value. A smaller dimension means that the rate of change is slower.

  8. Strong ion exchange in centrifugal partition extraction (SIX-CPE): effect of partition cell design and dimensions on purification process efficiency.

    Science.gov (United States)

    Hamzaoui, Mahmoud; Hubert, Jane; Reynaud, Romain; Marchal, Luc; Foucault, Alain; Renault, Jean-Hugues

    2012-07-20

    The aim of this article was to evaluate the influence of the column design of a hydrostatic support-free liquid-liquid chromatography device on the process efficiency when the strong ion-exchange (SIX) development mode is used. The purification of p-hydroxybenzylglucosinolate (sinalbin) from a crude aqueous extract of white mustard seeds (Sinapis alba L.) was achieved on two types of devices: a centrifugal partition chromatograph (CPC) and a centrifugal partition extractor (CPE). They differ in the number, volume and geometry of their partition cells. The SIX-CPE process was evaluated in terms of productivity and sinalbin purification capability as compared to previously optimized SIX-CPC protocols that were carried out on columns of 200 mL and 5700 mL inner volume, respectively. The objective was to determine whether the decrease in partition cell number, the increase in their volume and the use of a "twin cell" design would induce a significant increase in productivity by applying higher mobile phase flow rate while maintaining a constant separation quality. 4.6g of sinalbin (92% recovery) were isolated from 25 g of a crude white mustard seed extract, in only 32 min and with a purity of 94.7%, thus corresponding to a productivity of 28 g per hour and per liter of column volume (g/h/LV(c)). Therefore, the SIX-CPE process demonstrates promising industrial technology transfer perspectives for the large-scale isolation of ionized natural products. Copyright © 2012 Elsevier B.V. All rights reserved.

  9. Effect Of Ionized Radiation On Blood Vessels And Neural Celle On Workers In Cardiac Catheterization Units

    International Nuclear Information System (INIS)

    Elgazzar, E.M.S.

    2015-01-01

    The catheterization laboratory is generally considered an area where exposure to radiation is particularly high. Factors such as the configuration of the of the x-ray equipment, the number of cases per day, contribute to this relatively high level of exposure, which is amongst the highest in the hospital (Butler et al., 2006). Meanwhile, Systematic reviews of the published epidemiological literature and cardiovascular diseases or reviews of studies of populations medically, occupationally or environmentally exposed to relatively low-dose radiation concluded that there is a significant association (although with substantial heterogeneity) between radiation exposure and circulatory disease, either cardiovascular or cerebra-vascular. Vascular injury is a well recognized cause of late radiation therapy morbidity and this manifests as atherosclerosis in large vessels (Nagababu et al., 2009). Since the brain is among the most critical dose-limiting organs in radiotherapy, mainly due to the development of cognitive dysfunction following white matter disruption. The neuro-vascular unit is also vulnerable to radiation effects, and cerebra-vascular atherosclerotic damage is now considered proven (Raber, 2004). Circulating EPCs (endothelial progenitor cells) has been shown to be isolated from bone marrow or circulating mononuclear cells that express a variety of endothelial surface markers. EPCs incorporate into sites of revascularization and home to sites of endothelial denudation. Initial clinical studies demonstrated that risk factors for atherosclerosis are associated with reduced levels of circulating EPCs and that the functional integrity of the endothelium correlates with the activities of EPCs (Losordo and Dimmeler 2004). Since oxidative processes are essential one of the main mechanisms associated with radiation induced hazardous effects and early ageing is an effect associated with radiation exposure, accordingly it can be suggested that low-dose irradiation

  10. Theoretical characterization and design of small molecule donor material containing naphthodithiophene central unit for efficient organic solar cells.

    Science.gov (United States)

    Duan, Yu-Ai; Geng, Yun; Li, Hai-Bin; Jin, Jun-Ling; Wu, Yong; Su, Zhong-Min

    2013-07-15

    To seek for high-performance small molecule donor materials used in heterojunction solar cell, six acceptor-donor-acceptor small molecules based on naphtho[2,3-b:6,7-b']dithiophene (NDT) units with different acceptor units were designed and characterized using density functional theory and time-dependent density functional theory. Their geometries, electronic structures, photophysical, and charge transport properties have been scrutinized comparing with the reported donor material NDT(TDPP)2 (TDPP  =  thiophene-capped diketopyrrolopyrrole). The open circuit voltage (V(oc)), energetic driving force(ΔE(L-L)), and exciton binding energy (E(b)) were also provided to give an elementary understanding on their cell performance. The results reveal that the frontier molecular orbitals of 3-7 match well with the acceptor material PC61 BM, and compounds 3-5 were found to exhibit the comparable performances to 1 and show promising potential in organic solar cells. In particular, comparing with 1, system 7 with naphthobisthiadiazole acceptor unit displays broader absorption spectrum, higher V(oc), lower E(b), and similar carrier mobility. An in-depth insight into the nature of the involved excited states based on transition density matrix and charge density difference indicates that all S1 states are mainly intramolecular charge transfer states with the charge transfer from central NDT unit to bilateral acceptor units, and also imply that the exciton of 7 can be dissociated easily due to its large extent of the charge transfer. In a word, 7 maybe superior to 1 and may act as a promising donor candidate for organic solar cell. Copyright © 2013 Wiley Periodicals, Inc.

  11. Fermi surface properties of paramagnetic NpCd11 with a large unit cell

    Science.gov (United States)

    Homma, Yoshiya; Aoki, Dai; Haga, Yoshinori; Settai, Rikio; Sakai, Hironori; Ikeda, Shugo; Yamamoto, Etsuji; Nakamura, Akio; Shiokawa, Yoshinobu; Takeuchi, Tetsuya; Yamagami, Hiroshi; Ōnuki, Yoshichika

    2010-03-01

    We succeeded in growing a high-quality single crystal of NpCd11 with the cubic BaHg11-type structure by the Cd-self flux method. The lattice parameter of a = 9.2968(2) Å and crystallographic positions of the atoms were determined by x-ray single-crystal structure analysis. From the results of the magnetic susceptibility and specific heat experiments, this compound is found to be a 5f-localized paramagnet with the singlet ground state in the crystalline electric field (CEF) scheme. Fermi surface properties were measured using the de Haas-van Alphen (dHvA) technique. Long-period oscillations were observed in the dHvA frequency range of 9.1 x 105 to 1.9 x 107 Oe, indicating small cross-sectional areas of Fermi surfaces, which is consistent with a small Brillouin zone based on a large unit cell. From the results of dHvA and magnetoresistance experiments, the Fermi surface of NpCd11 is found to consist of many kinds of closed Fermi surfaces and a multiply-connected-like Fermi surface, although the result of energy band calculations based on the 5f-localized Np3+(5f4) configuration reveals the existence of only closed Fermi surfaces. The corresponding cyclotron effective mass is small, ranging from 0.1 to 0.7 m0, which is consistent with a small electronic specific heat coefficient γ ≅ 10mJ/K2·mol, revealing no hybridization between the 5f electrons and conduction electrons.

  12. Multi-sphere unit cell model to calculate the effective thermal conductivity in pebble bed reactors

    International Nuclear Information System (INIS)

    Van Antwerpen, W.; Rousseau, P.G.; Du Toit, C.G.

    2010-01-01

    A proper understanding of the mechanisms of heat transfer, fluid flow and pressure drop through a packed bed of spheres is of utmost importance in the design of a high temperature Pebble Bed Reactor (PBR). While the gas flows predominantly in the axial direction through the bed, the total effective thermal conductivity is a lumped parameter that characterises the total heat transfer in the radial direction through the packed bed. The study of the effective thermal conductivity is important because it forms an intricate part of the self-acting decay heat removal chain, which is directly related to the PBR safety case. The effective thermal conductivity is the summation of various heat transport phenomena. These are the enhanced thermal conductivity due to turbulent mixing as the fluid passes through the voids between pebbles, heat transfer due to the movement of the solid spheres and thermal conduction and thermal radiation between the spheres in a stagnant fluid environment. In this study, the conduction and radiation between the spheres are investigated. Firstly, existing correlations for the effective thermal conductivity are investigated, with particular attention given to its applicability in the near-wall region. Several phenomena in particular are examined namely: conduction through the spheres, conduction through the contact area between the spheres, conduction through the gas phase and radiation between solid surfaces. A new approach to simulate the effective thermal conductivity for randomly packed beds is then presented, namely the so-called Multi-sphere Unit Cell Model. The model is validated by comparing the results with that obtained in experiments. (authors)

  13. Indium phosphide solar cell research in the United States: Comparison with non-photovoltaic sources

    Science.gov (United States)

    Weinberg, I.; Swartz, C. K.; Hart, R. E., Jr.

    1989-01-01

    Highlights of the InP solar cell research program are presented. Homojunction cells with efficiencies approaching 19 percent are demonstrated, while 17 percent is achieved for ITO/InP cells. The superior radiation resistance of the two latter cell configurations over both Si and GaAs cells has been shown. InP cells aboard the LIPS3 satellite show no degradation after more than a year in orbit. Computed array specific powers are used to compare the performance of an InP solar cell array to solar dynamic and nuclear systems.

  14. THE FEATURES OF CONNEXINS EXPRESSION IN THE CELLS OF NEUROVASCLAR UNIT IN NORMAL CONDITIONS AND HYPOXIA IN VITRO

    Directory of Open Access Journals (Sweden)

    A. V. Morgun

    2014-01-01

    Full Text Available The aim of this research was to assess a role of connexin 43 (Cx43 and associated molecule CD38 in the regulation of cell-cell interactions in the neurovascular unit (NVU in vitro in physiological conditions and in hypoxia.Materials and methods. The study was done using the original neurovascular unit model in vitro. The NVU consisted of three cell types: neurons, astrocytes, and cerebral endothelial cells derived from rats. Hypoxia was induced by incubating cells with sodium iodoacetate for 30 min at37 °C in standard culture conditions.Results. We investigated the role of connexin 43 in the regulation of cell interactions within the NVU in normal and hypoxic injury in vitro. We found that astrocytes were characterized by high levels of expression of Cx43 and low level of CD38 expression, neurons demonstrated high levels of CD38 and low levels of Cx43. In hypoxic conditions, the expression of Cx43 and CD38 in astrocytes markedly increased while CD38 expression in neurons decreased, however no changes were found in endothelial cells. Suppression of Cx43 activity resulted in down-regulation of CD38 in NVU cells, both in physiological conditions and at chemical hypoxia.Conclusion. Thus, the Cx-regulated intercellular NAD+-dependent communication and secretory phenotype of astroglial cells that are the part of the blood-brain barrier is markedly changed in hypoxia.

  15. Deciphering the Role of Sulfonated Unit in Heparin-Mimicking Polymer to Promote Neural Differentiation of Embryonic Stem Cells.

    Science.gov (United States)

    Lei, Jiehua; Yuan, Yuqi; Lyu, Zhonglin; Wang, Mengmeng; Liu, Qi; Wang, Hongwei; Yuan, Lin; Chen, Hong

    2017-08-30

    Glycosaminoglycans (GAGs), especially heparin and heparan sulfate (HS), hold great potential for inducing the neural differentiation of embryonic stem cells (ESCs) and have brought new hope for the treatment of neurological diseases. However, the disadvantages of natural heparin/HS, such as difficulty in isolating them with a sufficient amount, highly heterogeneous structure, and the risk of immune responses, have limited their further therapeutic applications. Thus, there is a great demand for stable, controllable, and well-defined synthetic alternatives of heparin/HS with more effective biological functions. In this study, based upon a previously proposed unit-recombination strategy, several heparin-mimicking polymers were synthesized by integrating glucosamine-like 2-methacrylamido glucopyranose monomers (MAG) with three sulfonated units in different structural forms, and their effects on cell proliferation, the pluripotency, and the differentiation of ESCs were carefully studied. The results showed that all the copolymers had good cytocompatibility and displayed much better bioactivity in promoting the neural differentiation of ESCs as compared to natural heparin; copolymers with different sulfonated units exhibited different levels of promoting ability; among them, copolymer with 3-sulfopropyl acrylate (SPA) as a sulfonated unit was the most potent in promoting the neural differentiation of ESCs; the promoting effect is dependent on the molecular weight and concentration of P(MAG-co-SPA), with the highest levels occurring at the intermediate molecular weight and concentration. These results clearly demonstrated that the sulfonated unit in the copolymers played an important role in determining the promoting effect on ESCs' neural differentiation; SPA was identified as the most potent sulfonated unit for copolymer with the strongest promoting ability. The possible reason for sulfonated unit structure as a vital factor influencing the ability of the copolymers

  16. Development of integrated DMFC and PEM fuel cell units. Final report; Udvikling af integrerede DMFC og PEM braendselscelle enheder. Slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    Odgaard, M. (IRD Fuel Cell Technology, Svendborg (DK))

    2007-06-15

    The 36-month long project 'Development of integrated DMFC and PEM fuel cell units' has been completed. The project goal was to develop a completely new MEA concept for integrated PEM and DMFC unit cells with enhanced power density and in this way obtain a price reduction. The integrated unit cell consists of a MEA, a gas diffusion layer with flow fields completed with bipolar plates and seals. The main focus of the present project was to: 1) Develop new catalyst materials fabricated by the use of FSD (flame spray deposition method). 2) Optimisation of the state-of-the-art MEA materials and electrode structure. 3) Implementation of a model to account for the CO poisoning of PEM fuel cells. Results and progress obtained in the project established that the individual unit cell components were able to meet and follow the road map of LT-PEM FC regarding electrode catalyst loading and fulfilled the targets for Year 2006. The project has resulted in some important successes. The highlights are as follows: The project has resulted in some important successes. The highlights are as follows: 1) MEA structure knowledge acquired in the project provide a sound basis for further progress. 2) A novel method for the synthesis of electrode by using flame spray synthesis was explored. 3) Electrochemical and catalytic behaviours of catalysts activity for CH{sub 3}OH explored. 4) Implementation of a sub model to account for the CO poisoning of PEM FC has been developed. 5) Numerical study of the flow distribution in FC manifolds was developed and completed with experimental data. 6) The electrode catalyst loading targets for year 2006 achieved. 7) The DMFC MEA performance has been improved by 35%. 8) Optimisation of the MEAs fabrication process has been successfully developed. 9) A new simple flow field design has been designed. 10) A procedure for integrated seals has been developed (au)

  17. Dimensions of ecosystem theory

    International Nuclear Information System (INIS)

    O'Neill, R.V.; Reichle, D.E.

    1979-01-01

    Various dimensions of ecosystem structure and behavior that seem to develop from the ubiquitous phenomena of system growth and persistence were studied. While growth and persistence attributes of ecosystems may appear to be simplistic phenomena upon which to base a comprehensive ecosystem theory, these same attributes have been fundamental to the theoretical development of other biological disciplines. These attributes were explored at a hierarchical level in a self-organizing system, and adaptive system strategies that result were analyzed. Previously developed causative relations (Reichle et al., 1975c) were examined, their theoretical implications expounded upon, and the assumptions tested with data from a variety of forest types. The conclusions are not a theory in themselves, but a state of organization of concepts contributing towards a unifying theory, along the lines promulgated by Bray (1958). The inferences drawn rely heavily upon data from forested ecosystems of the world, and have yet to be validated against data from a much more diverse range of ecosystem types. Not all of the interpretations are logically tight - there is room for other explanations, which it is hoped will provide fruitful grounds for further speculation

  18. Preheating with extra dimensions

    International Nuclear Information System (INIS)

    Tsujikawa, S.

    2000-01-01

    We investigate preheating in a higher-dimensional generalized Kaluza-Klein theory with a quadratic inflaton potential V(/φ) = /frac12 m 2 /φ 2 including metric perturbations explicitly. The system we consider is the multi-field model where there exists a dilaton field /σ which corresponds to the scale of compactifications and another scalar field /χ coupled to inflaton with the interaction frac12 g 2 /φ 2 /χ 2 +/g-tilde 2 /φ 3 /χ. In the case of g-tilde=0, we find that the perturbation of dilaton does not undergo parametric amplification while the χ field fluctuation can be enhanced in the usual manner by parametric resonance. In the presence of the /g-tilde 2 /φ 3 /χ coupling, the dilaton fluctuation in sub-Hubble scales is modestly amplified by the growth of metric perturbations for the large coupling g-tilde. In super-Hubble scales, the enhancement of the dilaton fluctuation as well as metric perturbations is weak, taking into account the backreaction effect of created /χ particles. We argue that not only is it possible to predict the ordinary inflationary spectrum in large scales but extra dimensions can be held static during preheating in our scenario. (author)

  19. Comparison of the dimensions of electrical resistance units, supported on the basis of the Hall quantum effect, in the all-Russia research institute of metrological service and the Czech metrological institute

    Czech Academy of Sciences Publication Activity Database

    Semenchinsky, S. G.; Chrobok, P.; Svoboda, Pavel

    2008-01-01

    Roč. 51, č. 12 (2008), s. 1351-1356 ISSN 0543-1972 Institutional research plan: CEZ:AV0Z10100521 Keywords : resistance unit * quantum Hall effect * comparison * standards Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.151, year: 2008

  20. Extra dimensions and color confinement

    Energy Technology Data Exchange (ETDEWEB)

    Pleitez, V

    1995-04-01

    An extension of the ordinary four dimensional Minkowski space by introducing additional dimensions which have their own Lorentz transformation is considered. Particles can transform in a different way under each Lorentz group. It is shown that only quark interactions are slightly modified and that color confinement automatic since these degrees of freedom run only in the extra dimensions. No compactification of the extra dimensions is needed. (author). 4 refs.

  1. Constructive Dimension and Turing Degrees

    OpenAIRE

    Bienvenu, Laurent; Doty, David; Stephan, Frank

    2007-01-01

    This paper examines the constructive Hausdorff and packing dimensions of Turing degrees. The main result is that every infinite sequence S with constructive Hausdorff dimension dim_H(S) and constructive packing dimension dim_P(S) is Turing equivalent to a sequence R with dim_H(R) 0. Furthermore, if dim_P(S) > 0, then dim_P(R) >= 1 - epsilon. The reduction thus serves as a *randomness extractor* that increases the algorithmic randomness of S, as measured by constructive dimension. A number of...

  2. A battery-fuel cell hybrid auxiliary power unit for trucks: Analysis of direct and indirect hybrid configurations

    International Nuclear Information System (INIS)

    Samsun, Remzi Can; Krupp, Carsten; Baltzer, Sidney; Gnörich, Bruno; Peters, Ralf; Stolten, Detlef

    2016-01-01

    Highlights: • A battery-fuel cell hybrid auxiliary power unit for heavy duty vehicles is reported. • Comparison of direct and indirect hybrids using representative load profiles. • Evaluation based on validated fuel cell system and battery models. • Indirect hybrid with constant fuel cell load yields 29.3% hybrid system efficiency. • Fuel cell should be pre-heated using waste heat from the diesel engine during drive. - Abstract: The idling operation of engines in heavy duty vehicles to cover electricity demand during layovers entails significant fuel consumption and corresponding emissions. Indeed, this mode of operation is highly inefficient and a noteworthy contributor to the transportation sector’s aggregate carbon dioxide emissions. Here, a potential solution to this wasteful practice is outlined in the form of a hybrid battery-fuel cell system for application as an auxiliary power unit for trucks. Drawing on experimentally-validated fuel cell and battery models, several possible hybrid concepts are evaluated and direct and indirect hybrid configurations analyzed using a representative load profile. The results indicate that a direct hybrid configuration is only applicable if the load demand profile does not deviate strongly from the assumed profile. Operation of an indirect hybrid with a constant fuel cell load yields the greatest hybrid system efficiency, at 29.3%, while battery size could be reduced by 87% if the fuel cell is operated at the highest dynamics. Maximum efficiency in truck applications can be achieved by pre-heating the system prior to operation using exhaust heat from the motor, which increased system efficiency from 25.3% to 28.1%, including start-up. These findings confirm that hybrid systems could offer enormous fuel savings and constitute a sizeable step on the path toward energy-efficient and environmentally-friendly heavy duty vehicles that does not necessitate a fuel switch.

  3. Surface and Interface Properties of 10–12 Unit Cells Thick Sputter Deposited Epitaxial CeO2 Films

    Directory of Open Access Journals (Sweden)

    L. V. Saraf

    2008-01-01

    Full Text Available Ultrathin and continuous epitaxial films with relaxed lattice strain can potentially maintain more of its bulk physical and chemical properties and are useful as buffer layers. We study surface, interface, and microstructural properties of ultrathin (∼10–12 unit cells thick epitaxial ceria films grown on single crystal YSZ substrates. The out-of -plane and in-plane lattice parameters indicate relaxation in the continuous film due to misfit dislocations seen by high-resolution transmission electron microscopy (HRTEM and substrate roughness of ∼1-2 unit cells, confirmed by atomic force microscopy and HRTEM. A combination of secondary sputtering, lattice mismatch, substrate roughness, and surface reduction creating secondary phase was likely the cause of surface roughness which should be reduced to a minimum level for effective use of it as buffer layers.

  4. Quasi-Unit-Cell Model for an Al-Ni-Co Ideal Quasicrystal based on Clusters with Broken Tenfold Symmetry

    International Nuclear Information System (INIS)

    Abe, Eiji; Saitoh, Koh; Takakura, H.; Tsai, A. P.; Steinhardt, P. J.; Jeong, H.-C.

    2000-01-01

    We present new evidence supporting the quasi-unit-cell description of the Al 72 Ni 20 Co 8 decagonal quasicrystal which shows that the solid is composed of repeating, overlapping decagonal cluster columns with broken tenfold symmetry. We propose an atomic model which gives a significantly improved fit to electron microscopy experiments compared to a previous proposal by us and to alternative proposals with tenfold symmetric clusters. (c) 2000 The American Physical Society

  5. Fuel Cell Backup Power Unit Configuration and Electricity Market Participation: A Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Zhiwen [National Renewable Energy Lab. (NREL), Golden, CO (United States); Eichman, Josh [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurtz, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-03-13

    This National Renewable Energy Laboratory industry-inspired Laboratory Directed Research and Development project evaluates the feasibility and economics of using fuel cell backup power systems in cell towers to provide grid services (e.g., balancing, ancillary services, demand response). The work is intended to evaluate the integration of thousands of under-utilized, clean, efficient, and reliable fuel cell systems that are already installed in cell towers for potential grid and ancillary services.

  6. On the Effect of Unit-Cell Parameters in Predicting the Elastic Response of Wood-Plastic Composites

    Directory of Open Access Journals (Sweden)

    Fatemeh Alavi

    2013-01-01

    Full Text Available This paper presents a study on the effect of unit-cell geometrical parameters in predicting elastic properties of a typical wood plastic composite (WPC. The ultimate goal was obtaining the optimal values of representative volume element (RVE parameters to accurately predict the mechanical behavior of the WPC. For each unit cell, defined by a given combination of the above geometrical parameters, finite element simulation in ABAQUS was carried out, and the corresponding stress-strain curve was obtained. A uniaxial test according to ASTM D638-02a type V was performed on the composite specimen. Modulus of elasticity was determined using hyperbolic tangent function, and the results were compared to the sets of finite element analyses. Main effects of RVE parameters and their interactions were demonstrated and discussed, specially regarding the inclusion of two adjacent wood particles within one unit cell of the material. Regression analysis was performed to mathematically model the RVE parameter effects and their interactions over the modulus of elasticity response. The model was finally employed in an optimization analysis to arrive at an optimal set of RVE parameters that minimizes the difference between the predicted and experimental moduli of elasticity.

  7. Saliency of social comparison dimensions

    NARCIS (Netherlands)

    Kuyper, H.

    2007-01-01

    The present article discusses a theory of the saliency of social comparison dimensions and presents the results of an experiment about the effects of two different experimental situations on the saliency of exterior, task-related and socio-emotional dimensions. Saliency was operationalized with a

  8. Physics with large extra dimensions

    Indian Academy of Sciences (India)

    can then be accounted by the existence of large internal dimensions, in the sub- ... strongly coupled heterotic theory with one large dimension is described by a weakly ..... one additional U(1) factor corresponding to an extra 'U(1)' D-brane is ...

  9. The Hidden Dimensions of Art.

    Science.gov (United States)

    Klein, Bruce

    1982-01-01

    Describes an art program for preschool children that includes four social dimensions of art in order to heighten aesthetic perception, improve artistic creativity, and nurture self-esteem. The social dimensions are children having power, children acting on norms legitimate in their own eyes, children functioning "nonestrangedly," and children…

  10. Anomalous Dimensions of Conformal Baryons

    DEFF Research Database (Denmark)

    Pica, Claudio; Sannino, Francesco

    2016-01-01

    We determine the anomalous dimensions of baryon operators for the three color theory as function of the number of massless flavours within the conformal window to the maximum known order in perturbation theory. We show that the anomalous dimension of the baryon is controllably small, within...

  11. An introduction to extra dimensions

    International Nuclear Information System (INIS)

    Perez-Lorenzana, Abdel

    2005-01-01

    Models that involve extra dimensions have introduced completely new ways of looking up on old problems in theoretical physics. The aim of the present notes is to provide a brief introduction to the many uses that extra dimensions have found over the last few years, mainly following an effective field theory point of view. Most parts of the discussion are devoted to models with flat extra dimensions, covering both theoretical and phenomenological aspects. We also discuss some of the new ideas for model building where extra dimensions may play a role, including symmetry breaking by diverse new and old mechanisms. Some interesting applications of these ideas are discussed over the notes, including models for neutrino masses and proton stability. The last part of this review addresses some aspects of warped extra dimensions, and graviton localization

  12. The use of PEM united regenerative fuel cells in solar- hydrogen systems for remote area power supply

    International Nuclear Information System (INIS)

    Arun K Doddathimmaiah; John Andrews

    2006-01-01

    Remote area power supply (RAPS) is a potential early market for renewable energy - hydrogen systems because of the relatively high costs of conventional energy sources in remote regions. Solar hydrogen RAPS systems commonly employ photovoltaic panels, a Proton Exchange Membrane (PEM) electrolyser, a storage for hydrogen gas, and a PEM fuel cell. Currently such systems are more costly than conventional RAPS systems employing diesel generator back up or battery storage. Unitized regenerative fuel cells (URFCs) have the potential to lower the costs of solar hydrogen RAPS systems since a URFC employs the same hardware for both the electrolyser and fuel cell functions. The need to buy a separate electrolyser and a separate fuel cell, both expensive items, is thus avoided. URFCs are in principle particularly suited for use in RAPS applications since the electrolyser function and fuel cell function are never required simultaneously. The present paper reports experimental findings on the performance of a URFC compared to that of a dedicated PEM electrolyser and a dedicated fuel cell. A design for a single-cell PEM URFC for use in experiments is described. The experimental data give a good quantitative description of the performance characteristics of all the devices. It is found that the performance of the URFC in the electrolyser mode is closely similar to that of the stand-alone electrolyser. In the fuel cell mode the URFC performance is, however, lower than that of the stand-alone fuel cell. The wider implications of these findings for the economics of future solar-hydrogen RAPS systems are discussed, and a design target of URFCs for renewable-energy RAPS applications proposed. (authors)

  13. Spectral dimension of quantum geometries

    International Nuclear Information System (INIS)

    Calcagni, Gianluca; Oriti, Daniele; Thürigen, Johannes

    2014-01-01

    The spectral dimension is an indicator of geometry and topology of spacetime and a tool to compare the description of quantum geometry in various approaches to quantum gravity. This is possible because it can be defined not only on smooth geometries but also on discrete (e.g., simplicial) ones. In this paper, we consider the spectral dimension of quantum states of spatial geometry defined on combinatorial complexes endowed with additional algebraic data: the kinematical quantum states of loop quantum gravity (LQG). Preliminarily, the effects of topology and discreteness of classical discrete geometries are studied in a systematic manner. We look for states reproducing the spectral dimension of a classical space in the appropriate regime. We also test the hypothesis that in LQG, as in other approaches, there is a scale dependence of the spectral dimension, which runs from the topological dimension at large scales to a smaller one at short distances. While our results do not give any strong support to this hypothesis, we can however pinpoint when the topological dimension is reproduced by LQG quantum states. Overall, by exploring the interplay of combinatorial, topological and geometrical effects, and by considering various kinds of quantum states such as coherent states and their superpositions, we find that the spectral dimension of discrete quantum geometries is more sensitive to the underlying combinatorial structures than to the details of the additional data associated with them. (paper)

  14. Thermal dimension of quantum spacetime

    Energy Technology Data Exchange (ETDEWEB)

    Amelino-Camelia, Giovanni, E-mail: amelino@roma1.infn.it [Dipartimento di Fisica, Università “La Sapienza” and Sez. Roma1 INFN, P.le A. Moro 2, 00185 Roma (Italy); Brighenti, Francesco [Theoretical Physics, Blackett Laboratory, Imperial College, London, SW7 2BZ (United Kingdom); Dipartimento di Fisica e Astronomia dell' Università di Bologna and Sez. Bologna INFN, Via Irnerio 46, 40126 Bologna (Italy); Gubitosi, Giulia [Theoretical Physics, Blackett Laboratory, Imperial College, London, SW7 2BZ (United Kingdom); Santos, Grasiele [Dipartimento di Fisica, Università “La Sapienza” and Sez. Roma1 INFN, P.le A. Moro 2, 00185 Roma (Italy)

    2017-04-10

    Recent results suggest that a crucial crossroad for quantum gravity is the characterization of the effective dimension of spacetime at short distances, where quantum properties of spacetime become significant. This is relevant in particular for various scenarios of “dynamical dimensional reduction” which have been discussed in the literature. We are here concerned with the fact that the related research effort has been based mostly on analyses of the “spectral dimension”, which involves an unphysical Euclideanization of spacetime and is highly sensitive to the off-shell properties of a theory. As here shown, different formulations of the same physical theory can have wildly different spectral dimension. We propose that dynamical dimensional reduction should be described in terms of the “thermal dimension” which we here introduce, a notion that only depends on the physical content of the theory. We analyze a few models with dynamical reduction both of the spectral dimension and of our thermal dimension, finding in particular some cases where thermal and spectral dimension agree, but also some cases where the spectral dimension has puzzling properties while the thermal dimension gives a different and meaningful picture.

  15. Quantification of in situ temperature measurements on a PBI-based high temperature PEMFC unit cell

    DEFF Research Database (Denmark)

    Lebæk, Jesper; Ali, Syed Talat; Møller, Per

    2010-01-01

    The temperature is a very important operating parameter for all types of fuel cells. In the present work distributed in situ temperature measurements are presented on a polybenzimidazole based high temperature PEM fuel cell (HT-PEM). A total of 16 T-type thermocouples were embedded on both the an...

  16. FONT DISCRIMINATIO USING FRACTAL DIMENSIONS

    Directory of Open Access Journals (Sweden)

    S. Mozaffari

    2014-09-01

    Full Text Available One of the related problems of OCR systems is discrimination of fonts in machine printed document images. This task improves performance of general OCR systems. Proposed methods in this paper are based on various fractal dimensions for font discrimination. First, some predefined fractal dimensions were combined with directional methods to enhance font differentiation. Then, a novel fractal dimension was introduced in this paper for the first time. Our feature extraction methods which consider font recognition as texture identification are independent of document content. Experimental results on different pages written by several font types show that fractal geometry can overcome the complexities of font recognition problem.

  17. Supersymmetry breaking with extra dimensions

    International Nuclear Information System (INIS)

    Zwirner, Fabio

    2004-01-01

    This talk reviews some aspects of supersymmetry breaking in the presence of extra dimensions. The first part is a general introduction, recalling the motivations for supersymmetry and extra dimensions, as well as some unsolved problems of four-dimensional models of supersymmetry breaking. The central part is a more focused introduction to a mechanism for (super)symmetry breaking, proposed first by Scherk and Schwarz, where extra dimensions play a crucial role. The last part is devoted to the description of some recent results and of some open problems. (author)

  18. Preimage entropy dimension of topological dynamical systems

    OpenAIRE

    Liu, Lei; Zhou, Xiaomin; Zhou, Xiaoyao

    2014-01-01

    We propose a new definition of preimage entropy dimension for continuous maps on compact metric spaces, investigate fundamental properties of the preimage entropy dimension, and compare the preimage entropy dimension with the topological entropy dimension. The defined preimage entropy dimension holds various basic properties of topological entropy dimension, for example, the preimage entropy dimension of a subsystem is bounded by that of the original system and topologically conjugated system...

  19. Assessment of changes in plasma hemoglobin and potassium levels in red cell units during processing and storage.

    Science.gov (United States)

    Saini, Nishant; Basu, Sabita; Kaur, Ravneet; Kaur, Jasbinder

    2015-06-01

    Red cell units undergo changes during storage and processing. The study was planned to assess plasma potassium, plasma hemoglobin, percentage hemolysis during storage and to determine the effects of outdoor blood collection and processing on those parameters. Blood collection in three types of blood storage bags was done - single CPDA bag (40 outdoor and 40 in-house collection), triple CPD + SAGM bag (40 in-house collection) and quadruple CPD + SAGM bag with integral leukoreduction filter (40 in-house collection). All bags were sampled on day 0 (day of collection), day 1 (after processing), day 7, day 14 and day 28 for measurement of percentage hemolysis and potassium levels in the plasma of bag contents. There was significant increase in percentage hemolysis, plasma hemoglobin and plasma potassium level in all the groups during storage (p levels during the storage of red blood cells. Blood collection can be safely undertaken in outdoor blood donation camps even in hot summer months in monitored blood transport boxes. SAGM additive solution decreases the red cell hemolysis and allows extended storage of red cells. Prestorage leukoreduction decreases the red cell hemolysis and improves the quality of blood. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Inflation from periodic extra dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Higaki, Tetsutaro [Department of Physics, Keio University, Kanagawa 223-8522 (Japan); Tatsuta, Yoshiyuki, E-mail: thigaki@rk.phys.keio.ac.jp, E-mail: y_tatsuta@akane.waseda.jp [Department of Physics, Waseda University, Tokyo 169-8555 (Japan)

    2017-07-01

    We discuss a realization of a small field inflation based on string inspired supergravities. In theories accompanying extra dimensions, compactification of them with small radii is required for realistic situations. Since the extra dimension can have a periodicity, there will appear (quasi-)periodic functions under transformations of moduli of the extra dimensions in low energy scales. Such a periodic property can lead to a UV completion of so-called multi-natural inflation model where inflaton potential consists of a sum of multiple sinusoidal functions with a decay constant smaller than the Planck scale. As an illustration, we construct a SUSY breaking model, and then show that such an inflaton potential can be generated by a sum of world sheet instantons in intersecting brane models on extra dimensions containing orbifold. We show also predictions of cosmic observables by numerical analyzes.

  1. Physics with large extra dimensions

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 62; Issue 2 ... The recent understanding of string theory opens the possibility that the string scale can be as ... by the existence of large internal dimensions, in the sub-millimeter region.

  2. Temporal dimension in cognitive models

    International Nuclear Information System (INIS)

    Decortis, F.; Cacciabue, P.C.

    1988-01-01

    Increased attention has been given to the role of humans in nuclear power plant safety, but one aspect seldom considered is the temporal dimension of human reasoning. Time is recognized as crucial in human reasoning and has been the subject of empirical studies where cognitive mechanisms and strategies to face the temporal dimension have been studied. The present study shows why temporal reasoning is essential in Human Reliability Analysis and how it could be introduced in a human model. Accounting for the time dimension in human behaviour is discussed first, with reference to proven field studies. Then, theoretical modelling of the temporal dimension in human reasoning and its relevance in simulation of cognitive activities of plant operator is discussed. Finally a Time Experience Model is presented

  3. Interactive Dimensioning of Parametric Models

    KAUST Repository

    Kelly, T.; Wonka, Peter; Mueller, P.

    2015-01-01

    that adapts to the view direction, given behavioral properties. After proposing a set of design principles for interactive dimensioning, we describe our solution consisting of the following major components. First, we describe how an author can specify

  4. Conformal dimension theory and application

    CERN Document Server

    Mackay, John M

    2010-01-01

    Conformal dimension measures the extent to which the Hausdorff dimension of a metric space can be lowered by quasisymmetric deformations. Introduced by Pansu in 1989, this concept has proved extremely fruitful in a diverse range of areas, including geometric function theory, conformal dynamics, and geometric group theory. This survey leads the reader from the definitions and basic theory through to active research applications in geometric function theory, Gromov hyperbolic geometry, and the dynamics of rational maps, amongst other areas. It reviews the theory of dimension in metric spaces and of deformations of metric spaces. It summarizes the basic tools for estimating conformal dimension and illustrates their application to concrete problems of independent interest. Numerous examples and proofs are provided. Working from basic definitions through to current research areas, this book can be used as a guide for graduate students interested in this field, or as a helpful survey for experts. Background needed ...

  5. The search for extra dimensions

    International Nuclear Information System (INIS)

    Abel, Steven; March-Russell, John

    2000-01-01

    The possibility of extra dimensions, beyond the three dimensions of space of our everyday experience, sometimes crops up as a convenient, if rather vague, plot in science fiction. In science, however, the idea of extra dimensions has a rich history, dating back at least as far as the 1920s. Recently there has been a remarkable renaissance in this area due to the work of a number of theoretical physicists. It now seems possible that we, the Earth and, indeed, the entire visible universe are stuck on a membrane in a higher-dimensional space, like dust particles that are trapped on a soap bubble. In this article the authors look at the major issues behind this new development. Why, for example, don't we see these extra dimensions? If they exist, how can we detect them? And perhaps the trickiest question of all: how did this fanciful idea come to be considered in the first place? (U.K.)

  6. Learning to Change: New Dimensions.

    Science.gov (United States)

    Loughlin, Kathleen

    1996-01-01

    Change involves thoughts, emotions, values, and actions but thought gets the most attention. Learning to change necessitates an integration of rational and nonrational ways of knowing. Nonrational ways and human care are important dimensions of the learning process. (SK)

  7. Innovation on a Hospital Perinatal Unit: Cell Phone Use by Nurses

    National Research Council Canada - National Science Library

    Petrilak, Thomas

    2002-01-01

    .... This study evaluates the impact and effect of cell phone communication technology on reducing nurse task frequency and time spent on activities that could more appropriately be accomplished by hospital support staff...

  8. Natural Killer/T-cell Neoplasms: Analysis of Incidence, Patient Characteristics, and Survival Outcomes in the United States.

    Science.gov (United States)

    Kommalapati, Anuhya; Tella, Sri Harsha; Ganti, Apar Kishore; Armitage, James O

    2018-05-04

    Limited data are available regarding the incidence, survival patterns, and long-term outcomes of natural killer (NK)/T-cell neoplasms in the United States. We performed a retrospective study of patients with NK/T-cell neoplasms diagnosed from 2001 to 2014 using the Surveillance, Epidemiology, and End Results program database. The Kaplan-Meier method was used to estimate the overall survival difference among the subgroups. Multivariate analyses were used to determine the factors affecting survival. For the 797 patients with NK/T-cell lymphoma, nasal type, the median age at diagnosis was 53 years, and males tended to be younger at diagnosis (P < .0001). The incidence of the disease increased from 0.4 in 2001 to 0.8 in 2014 per 1,000,000 individuals. The incidence was significantly greater in Hispanic patients compared with that in non-Hispanic patients (rate ratio, 3.03; P = .0001). The median overall survival was 20 months (range, 2-73 months) and varied significantly according to the primary site (P < .0001) and the disease stage at diagnosis (P < .0001). NK/T-cell lymphoma patients had an increased risk of acute myeloid leukemia (standardized incidence ratio, 18.77; 95% confidence interval, 2.27-67.81). For the 105 NK/T-cell leukemia patients, the median age at diagnosis was 58 years (range, 4-95 years). The overall incidence of the disease was 0.09 per 1,000,000 individuals and was significantly greater in males (rate ratio, 0.41; P < .0001). Unlike NK/T-cell lymphoma, no racial disparities were found in the incidence. The median overall survival was 17 months (range, 0-36 months). The incidence of NK/T-cell lymphoma, nasal type, in the United States has at least doubled in the past decade, with the greatest predilection among Hispanics. Patients with NK/T-cell lymphoma might have an increased risk of the subsequent development of acute myeloid leukemia. Copyright © 2018 Elsevier Inc. All rights reserved.

  9. Fuel cell programs in the United States for stationary power applications

    Energy Technology Data Exchange (ETDEWEB)

    Singer, M.

    1996-04-01

    The Department of Energy (DOE), Office of Fossil Energy, is participating with the private sector in sponsoring the development of molten carbonate fuel cell (MCFC) and solid oxide fuel cell (SOFC) technologies for application in the utility, commercial and industrial sectors. Phosphoric acid fuel cell (PAFC) development was sponsored by the Office of Fossil Energy in previous years and is now being commercialized by the private sector. Private sector participants with the Department of Energy include the Electric Power Research Institute (EPRI), the Gas Research institute (GRI), electric and gas utilities, universities, manufacturing companies and their suppliers. through continued government and private sector support, fuel cell systems are emerging power generation technologies which are expected to have significant worldwide impacts. An industry with annual sales of over a billion dollars is envisioned early in the 21st century. PAFC power plants have begun to enter the marketplace and MCFC and SOFC power plants are expected to be ready to enter the marketplace in the late 1990s. In support of the efficient and effective use of our natural resources, the fuel cell program seeks to increase energy efficiency and economic effectiveness of power generation. This is to be accomplished through effectiveness of power generation. This is accomplished through the development and commercialization of cost-effective, efficient and environmentally desirable fuel cell systems which will operate on fossil fuels in multiple and end use sectors.

  10. One unit-cell seed layer induced epitaxial growth of heavily nitrogen doped anatase TiO{sub 2} films

    Energy Technology Data Exchange (ETDEWEB)

    Chen, T L; Hirose, Y; Hitosugi, T; Hasegawa, T [Kanagawa Academy of Science and Technology (KAST), Kawasaki 213-0012 (Japan)], E-mail: chen@ksp.or.jp

    2008-03-21

    We present a novel way to obtain heavily nitrogen doped anatase TiO{sub 2} films by using a solid-state nitrogen source. Epitaxial growth of the films was realized by introducing one unit-cell seed layer, which was indicated by reflection high-energy electron diffraction as intensity oscillation. Results of x-ray diffraction and x-ray photoelectron spectroscopy confirmed that the films were in the anatase phase heavily doped with nitrogen of {approx}15 at%. The films obtained exhibited considerable narrowing of the optical bandgap, resulting in an enhancement of absorption in the visible-light region. (fast track communication)

  11. Dancoff factors of unit cells in cluster geometry with partial absorption of neutrons

    International Nuclear Information System (INIS)

    Rodrigues, Leticia Jenisch

    2011-01-01

    In its classical formulation, the Dancoff factor for a perfectly absorbing fuel rod is defined as the relative reduction in the incurrent of resonance neutrons into the rod in the presence of neighboring rods, as compared to the incurrent into a single fuel rod immersed in an infinite moderator. Alternatively, this factor can be viewed as the probability that a neutron emerging from the surface of a fuel rod will enter another fuel rod without any collision in the moderator or cladding. For perfectly absorbing fuel these definitions are equivalent. In the last years, several works appeared in literature reporting improvements in the calculation of Dancoff factors, using both the classical and the collision probability definitions. In this work, we step further reporting Dancoff factors for perfectly absorbing (Black) and partially absorbing (Grey) fuel rods calculated by the collision probability method, in cluster cells with square outer boundaries. In order to validate the results, comparisons are made with the equivalent cylindricalized cell in hypothetical test cases. The calculation is performed considering specularly reflecting boundary conditions, for the square lattice, and diffusive reflecting boundary conditions, for the cylindrical geometry. The results show the expected asymptotic behavior of the solution with increasing cell sizes. In addition, Dancoff factors are computed for the Canadian cells CANDU-37 and CANFLEX by the Monte Carlo and Direct methods. Finally, the effective multiplication factors, k eff , for these cells (cluster cell with square outer boundaries and the equivalent cylindricalized cell) are also computed, and the differences reported for the cases using the perfect and partial absorption assumptions. (author)

  12. Inter-relationships between single carbon units' metabolism and resting energy expenditure in weight-losing patients with small cell lung cancer. Effects of methionine supply and chemotherapy

    DEFF Research Database (Denmark)

    Sengeløv, H; Hansen, O P; Simonsen, L

    1994-01-01

    The one-carbon unit metabolism was investigated in 8 weight-losing patients with small cell carcinoma of the lung (SCLC). At diagnosis, 6 of the 8 patients had elevated formiminoglutamic acid (FIGLU) excretion after a histidine load, suggesting a lack of one-carbon units. In accordance...

  13. Inter-relationships between single carbon units' metabolism and resting energy expenditure in weight-losing patients with small cell lung cancer. Effects of methionine supply and chemotherapy

    DEFF Research Database (Denmark)

    Sengeløv, H; Hansen, O P; Simonsen, L

    1994-01-01

    The one-carbon unit metabolism was investigated in 8 weight-losing patients with small cell carcinoma of the lung (SCLC). At diagnosis, 6 of the 8 patients had elevated formiminoglutamic acid (FIGLU) excretion after a histidine load, suggesting a lack of one-carbon units. In accordance, a signifi...

  14. Growth Factor Independence-1 (Gfi1) Is Required for Pancreatic Acinar Unit Formation and Centroacinar Cell Differentiation

    DEFF Research Database (Denmark)

    Qu, Xiaoling; Nyeng, Pia; Xiao, Fan

    2015-01-01

    of granulocytes, inner ear hair cells, and the development of secretory cell types in the intestine. As GFI1/Gfi1 is expressed in human and rodent pancreas, we characterized the potential function of Gfi1 in mouse pancreatic development. METHODS: Gfi1 knockout mice were analyzed at histological and molecular...... levels, including qRT-PCR, in situ hybridization, immunohistochemistry, and electron microscopy. RESULTS: Loss of Gfi1 impacted formation and structure of the pancreatic acinar/centroacinar unit. Histologic and ultrastructural analysis of Gfi1-null pancreas revealed specific defects at the level...... was correlated with an exocrine organ defect. Postnatally, Gfi1 deficiency resulted in severe pancreatic acinar dysplasia, including loss of granulation, autolytic vacuolation, and a proliferative and apoptotic response. CONCLUSIONS: Gfi1 plays an important role in regulating the development of pancreatic CACs...

  15. Diffusion of single Au, Ag and Cu atoms inside Si(111)-(7 × 7) half unit cells: A comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Qin [Department of Physics, Southern University of Science and Technology, Shenzhen, Guangdong 518055 (China); Department of Physics, The Chinese University of Hong Kong, Shatin, New Territory, Hong Kong (China); Science and Technology on Surface Physics and Chemistry Laboratory, Mianyang, Sichuan 621908 (China); Fu, Qiang [Institut für Physik and IRIS Adlershof, Humboldt-Universität zu Berlin, Zum Großen Windkanal 6, 12489 Berlin (Germany); Shao, Xiji; Ma, Xuhang; Wu, Xuefeng [Department of Physics, Southern University of Science and Technology, Shenzhen, Guangdong 518055 (China); Wang, Kedong, E-mail: wangkd@sustc.edu.cn [Department of Physics, Southern University of Science and Technology, Shenzhen, Guangdong 518055 (China); Xiao, Xudong, E-mail: xdxiao@phy.cuhk.edu.hk [Department of Physics, The Chinese University of Hong Kong, Shatin, New Territory, Hong Kong (China)

    2017-04-15

    Highlights: • Diffusions of Au, Ag and Cu atoms in the half unit cells of Si(111)-(7×7) have been studied by using a STM-based I-t method. • Despite their similar absorption sites, the diffusion dynamics show obvious differences between Ag and the other two. • Theoretical calculations suggest that different potential energy profiles are responsible for the observed differences. - Abstract: The diffusion behaviors of single Au, Ag and Cu atoms on Si(111)-(7 × 7) half unit cells have been investigated via combining scanning tunneling microscopy and first-principles calculations. Despite the similar adsorption sites between both half unit cells among these elements, the diffusion dynamics show obvious differences between Ag and the other two. Although obvious asymmetry has been found in the diffusion behaviors of Au and Cu atoms in two half unit cells of Si(111)-(7 × 7), the asymmetry behaves in a way different from that of Ag atoms and no dual-time character has been observed for the diffusions of Au and Cu in both half unit cells. Theoretical calculations suggest a different potential energy profile caused by the stronger hybridization between d states of Au (Cu) and Si states make the concept of basin useless for the diffusion of Au and Cu atoms inside the half unit cells of Si(111)-(7 × 7).

  16. Space Station Biological Research Project (SSBRP) Cell Culture Unit (CCU) and incubator for International Space Station (ISS) cell culture experiments

    Science.gov (United States)

    Vandendriesche, Donald; Parrish, Joseph; Kirven-Brooks, Melissa; Fahlen, Thomas; Larenas, Patricia; Havens, Cindy; Nakamura, Gail; Sun, Liping; Krebs, Chris; de Luis, Javier; hide

    2004-01-01

    The CCU and Incubator are habitats under development by SSBRP for gravitational biology research on ISS. They will accommodate multiple specimen types and reside in either Habitat Holding Racks, or the Centrifuge Rotor, which provides selectable gravity levels of up to 2 g. The CCU can support multiple Cell Specimen Chambers, CSCs (18, 9 or 6 CSCs; 3, 10 or 30 mL in volume, respectively). CSCs are temperature controlled from 4-39 degrees C, with heat shock to 45 degrees C. CCU provides automated nutrient supply, magnetic stirring, pH/O2 monitoring, gas supply, specimen lighting, and video microscopy. Sixty sample containers holding up to 2 mL each, stored at 4-39 degrees C, are available for automated cell sampling, subculture, and injection of additives and fixatives. CSCs, sample containers, and fresh/spent media bags are crew-replaceable for long-term experiments. The Incubator provides a 4-45 degrees C controlled environment for life science experiments or storage of experimental reagents. Specimen containers and experiment unique equipment are experimenter-provided. The Specimen Chamber exchanges air with ISS cabin and has 18.8 liters of usable volume that can accommodate six trays and the following instrumentation: five relocatable thermometers, two 60 W power outlets, four analog ports, and one each relative humidity sensor, video port, ethernet port and digital input/output port.

  17. Extra dimensions in space and time

    CERN Document Server

    Bars, Itzhak

    2010-01-01

    Covers topics such as Einstein and the Fourth Dimension; Waves in a Fifth Dimension; and String Theory and Branes Experimental Tests of Extra Dimensions. This book offers a discussion on Two-Time Physics

  18. Higuchi dimension of digital images.

    Directory of Open Access Journals (Sweden)

    Helmut Ahammer

    Full Text Available There exist several methods for calculating the fractal dimension of objects represented as 2D digital images. For example, Box counting, Minkowski dilation or Fourier analysis can be employed. However, there appear to be some limitations. It is not possible to calculate only the fractal dimension of an irregular region of interest in an image or to perform the calculations in a particular direction along a line on an arbitrary angle through the image. The calculations must be made for the whole image. In this paper, a new method to overcome these limitations is proposed. 2D images are appropriately prepared in order to apply 1D signal analyses, originally developed to investigate nonlinear time series. The Higuchi dimension of these 1D signals is calculated using Higuchi's algorithm, and it is shown that both regions of interests and directional dependencies can be evaluated independently of the whole picture. A thorough validation of the proposed technique and a comparison of the new method to the Fourier dimension, a common two dimensional method for digital images, are given. The main result is that Higuchi's algorithm allows a direction dependent as well as direction independent analysis. Actual values for the fractal dimensions are reliable and an effective treatment of regions of interests is possible. Moreover, the proposed method is not restricted to Higuchi's algorithm, as any 1D method of analysis, can be applied.

  19. Octasaccharide is the minimal length unit required for efficient binding of cyclophilin B to heparin and cell surface heparan sulphate.

    Science.gov (United States)

    Vanpouille, Christophe; Denys, Agnès; Carpentier, Mathieu; Pakula, Rachel; Mazurier, Joël; Allain, Fabrice

    2004-09-01

    Cyclophilin B (CyPB) is a heparin-binding protein first identified as a receptor for cyclosporin A. In previous studies, we reported that CyPB triggers chemotaxis and integrin-mediated adhesion of T-lymphocytes by way of interaction with two types of binding sites. The first site corresponds to a signalling receptor; the second site has been identified as heparan sulphate (HS) and appears crucial to induce cell adhesion. Characterization of the HS-binding unit is critical to understand the requirement of HS in pro-adhesive activity of CyPB. By using a strategy based on gel mobility shift assays with fluorophore-labelled oligosaccharides, we demonstrated that the minimal heparin unit required for efficient binding of CyPB is an octasaccharide. The mutants CyPB(KKK-) [where KKK- refers to the substitutions K3A(Lys3-->Ala)/K4A/K5A] and CyPB(DeltaYFD) (where Tyr14-Phe-Asp16 has been deleted) failed to interact with octasaccharides, confirming that the Y14FD16 and K3KK5 clusters are required for CyPB binding. Molecular modelling revealed that both clusters are spatially arranged so that they may act synergistically to form a binding site for the octasaccharide. We then demonstrated that heparin-derived octasaccharides and higher degree of polymerization oligosaccharides inhibited the interaction between CyPB and fluorophore-labelled HS chains purified from T-lymphocytes, and strongly reduced the HS-dependent pro-adhesive activity of CyPB. However, oligosaccharides or heparin were unable to restore adhesion of heparinase-treated T-lymphocytes, indicating that HS has to be present on the cell membrane to support the pro-adhesive activity of CyPB. Altogether, these results demonstrate that the octasaccharide is likely to be the minimal length unit required for efficient binding of CyPB to cell surface HS and consequent HS-dependent cell responses.

  20. STREAMLINED APPROACH FOR ENVIRONMENTAL RESTORATION PLAN FOR CORRECTIVE ACTION UNIT 116: AREA 25 TEST CELL C FACILITY NEVADA TEST SITE, NEVADA

    International Nuclear Information System (INIS)

    2006-01-01

    This Streamlined Approach for Environmental Restoration Plan identifies the activities required for the closure of Corrective Action Unit 116, Area 25 Test Cell C Facility. The Test Cell C Facility is located in Area 25 of the Nevada Test Site approximately 25 miles northwest of Mercury, Nevada

  1. Conjugated Polymer with Intrinsic Alkyne Units for Synergistically Enhanced Raman Imaging in Living Cells.

    Science.gov (United States)

    Li, Shengliang; Chen, Tao; Wang, Yunxia; Liu, Libing; Lv, Fengting; Li, Zhiliang; Huang, Yanyi; Schanze, Kirk S; Wang, Shu

    2017-10-16

    Development of Raman-active materials with enhanced and distinctive Raman vibrations in the Raman-silent region (1800-2800 cm -1 ) is highly required for specific molecular imaging of living cells with high spatial resolution. Herein, water-soluble cationic conjugated polymers (CCPs), poly(phenylene ethynylene) (PPE) derivatives, are explored for use as alkyne-state-dependent Raman probes for living cell imaging due to synergetic enhancement effect of alkyne vibrations in Raman-silent region compared to alkyne-containing small molecules. The enhanced alkyne signals result from the integration of alkyne groups into the rigid backbone and the delocalized π-conjugated structure. PPE-based conjugated polymer nanoparticles (CPNs) were also prepared as Raman-responsive nanomaterials for distinct imaging application. This work opens a new way into the development of conjugated polymer materials for enhanced Raman imaging. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Bianchi identities in higher dimensions

    International Nuclear Information System (INIS)

    Pravda, V; Pravdova, A; Coley, A; Milson, R

    2004-01-01

    A higher dimensional frame formalism is developed in order to study implications of the Bianchi identities for the Weyl tensor in vacuum spacetimes of the algebraic types III and N in arbitrary dimension n. It follows that the principal null congruence is geodesic and expands isotropically in two dimensions and does not expand in n - 4 spacelike dimensions or does not expand at all. It is shown that the existence of such principal geodesic null congruence in vacuum (together with an additional condition on twist) implies an algebraically special spacetime. We also use the Myers-Perry metric as an explicit example of a vacuum type D spacetime to show that principal geodesic null congruences in vacuum type D spacetimes do not share this property

  3. Physics with large extra dimensions

    CERN Document Server

    Antoniadis, Ignatios

    2004-01-01

    The recent understanding of string theory opens the possibility that the string scale can be as low as a few TeV. The apparent weakness of gravitational interactions can then be accounted by the existence of large internal dimensions, in the submillimeter region. Furthermore, our world must be confined to live on a brane transverse to these large dimensions, with which it interacts only gravitationally. In my lecture, I describe briefly this scenario which gives a new theoretical framework for solving the gauge hierarchy problem and the unification of all interactions. I also discuss its main properties and implications for observations at both future particle colliders, and in non-accelerator gravity experiments. Such effects are for instance the production of Kaluza-Klein resonances, graviton emission in the bulk of extra dimensions, and a radical change of gravitational forces in the submillimeter range.

  4. The Existential Dimension of Right

    DEFF Research Database (Denmark)

    Hartz, Emily

    2017-01-01

    for discussing the existential dimension of right by bringing central parts of Fichte’s and Arendt’s work into dialogue. By facilitating this – admittedly unusual – dialogue between Fichte and Arendt the author explicates how, for both Fichte and Arendt, the concept of right can only be adequately understood......The following article paves out the theoretical ground for a phenomenological discussion of the existential dimension of right. This refers to a dimension of right that is not captured in standard treatments of right, namely the question of whether – or how the concept of rights relates...... as referring to the existential condition of plurality and uses this insight to draw up a theoretical ground for further phenomenological analysis of right....

  5. Collapse of large extra dimensions

    International Nuclear Information System (INIS)

    Geddes, James

    2002-01-01

    In models of spacetime that are the product of a four-dimensional spacetime with an 'extra' dimension, there is the possibility that the extra dimension will collapse to zero size, forming a singularity. We ask whether this collapse is likely to destroy the spacetime. We argue, by an appeal to the four-dimensional cosmic censorship conjecture, that--at least in the case when the extra dimension is homogeneous--such a collapse will lead to a singularity hidden within a black string. We also construct explicit initial data for a spacetime in which such a collapse is guaranteed to occur and show how the formation of a naked singularity is likely avoided

  6. Correlated Electrons in Reduced Dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Bonesteel, Nicholas E [Florida State Univ., Tallahassee, FL (United States)

    2015-01-31

    This report summarizes the work accomplished under the support of US DOE grant # DE-FG02-97ER45639, "Correlated Electrons in Reduced Dimensions." The underlying hypothesis of the research supported by this grant has been that studying the unique behavior of correlated electrons in reduced dimensions can lead to new ways of understanding how matter can order and how it can potentially be used. The systems under study have included i) fractional quantum Hall matter, which is realized when electrons are confined to two-dimensions and placed in a strong magnetic field at low temperature, ii) one-dimensional chains of spins and exotic quasiparticle excitations of topologically ordered matter, and iii) electrons confined in effectively ``zero-dimensional" semiconductor quantum dots.

  7. Squamous cell carcinoma of the breast in the United States: incidence, demographics, tumor characteristics, and survival.

    Science.gov (United States)

    Yadav, Siddhartha; Yadav, Dhiraj; Zakalik, Dana

    2017-07-01

    Squamous cell carcinoma of breast accounts for less than 0.1% of all breast cancers. The purpose of this study is to describe the epidemiology and survival of this rare malignancy. Data were extracted from the National Cancer Institute's Surveillance, Epidemiology and End Results Registry to identify women diagnosed with squamous cell carcinoma of breast between 1998 and 2013. SEER*Stat 8.3.1 was used to calculate age-adjusted incidence, age-wise distribution, and annual percentage change in incidence. Kaplan-Meier curves were plotted for survival analysis. Univariate and multivariate Cox proportional hazard regression model was used to determine predictors of survival. A total of 445 cases of squamous cell carcinoma of breast were diagnosed during the study period. The median age of diagnosis was 67 years. The overall age-adjusted incidence between 1998 and 2013 was 0.62 per 1,000,000 per year, and the incidence has been on a decline. Approximately half of the tumors were poorly differentiated. Stage II was the most common stage at presentation. Majority of the cases were negative for expression of estrogen and progesterone receptor. One-third of the cases underwent breast conservation surgery while more than half of the cases underwent mastectomy (unilateral or bilateral). Approximately one-third of cases received radiation treatment. The 1-year and 5-year cause-specific survival was 81.6 and 63.5%, respectively. Excluding patient with metastasis or unknown stage at presentation, in multivariate Cox proportional hazard model, older age at diagnosis and higher tumor stage (T3 or T4) or nodal stage at presentation were significant predictors of poor survival. Our study describes the unique characteristics of squamous cell carcinoma of breast and demonstrates that it is an aggressive tumor with a poor survival. Older age and higher tumor or nodal stages at presentation were independent predictors of poor survival for loco-regional stages.

  8. Single fibre and multifibre unit cell analysis of strength and cracking of unidirectional composites

    DEFF Research Database (Denmark)

    Wang, H.W.; Zhou, H.W.; Mishnaevsky, Leon

    2009-01-01

    damageable parts in composites (matrix cracks, fibre/matrix interface damage and fibre fracture) was observed in the simulations. The strength of interface begins to influence the deformation behaviour of the cell only after the fibre is broken. In this case, the higher interface layer strength leads...... to the higher stiffness of the damaged material. The damage in the composites begins by fibre breakage, which causes the interface damage, followed by matrix cracking....

  9. A COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF AIR FLOW THROUGH A TELECOM BACK-UP UNIT POWERED BY AN AIR-COOLED PROTON EXCHANGE MEMBRANE FUEL CELL

    DEFF Research Database (Denmark)

    Gao, Xin; Berning, Torsten; Kær, Søren Knudsen

    2016-01-01

    Proton exchange membrane fuel cells (PEMFC’s) are currently being commercialized for various applications ranging from automotive to stationary such as powering telecom back-up units. In PEMFC’s, oxygen from air is internally combined with hydrogen to form water and produce electricity and heat....... This product heat has to be effectively removed from the fuel cell, and while automotive fuel cells are usually liquid-cooled using a secondary coolant loop similar to the internal combustion engines, stationary fuel cell systems as they are used for telecom back-up applications often rely on excessive air fed...... to the fuel cell cathode to remove the heat. Thereby, the fuel cell system is much simpler and cheaper while the fuel cell performance is substantially lower compared to automotive fuel cells. This work presents a computational fluid dynamics analysis on the heat management of an air-cooled fuel cell powered...

  10. HTTR criticality calculations with SCALE6: Studies of various geometric and unit-cell options in modeling

    Energy Technology Data Exchange (ETDEWEB)

    Wang, J. Y.; Chiang, M. H.; Sheu, R. J.; Liu, Y. W. H. [Inst. of Nuclear Engineering and Science, National Tsing Hua Univ., Hsinchu 30013, Taiwan (China)

    2012-07-01

    The fuel element of the High Temperature Engineering Test Reactor (HTTR) presents a doubly heterogeneous geometry, where tiny TRISO fuel particles dispersed in a graphite matrix form the fuel region of a cylindrical fuel rod, and a number of fuel rods together with moderator or reflector then constitute the lattice design of the core. In this study, a series of full-core HTTR criticality calculations were performed with the SCALE6 code system using various geometric and unit-cell options in order to systematically investigate their effects on neutronic analysis. Two geometric descriptions (ARRAY or HOLE) in SCALE6 can be used to construct a complicated and repeated model. The result shows that eliminating the use of HOLE in the HTTR geometric model can save the computation time by a factor of 4. Four unit-cell treatments for resonance self-shielding corrections in SCALE6 were tested to create problem-specific multigroup cross sections for the HTTR core model. Based on the same ENDF/B-VII cross-section library, their results were evaluated by comparing with continuous-energy calculations. The comparison indicates that the INFHOMMEDIUM result overestimates the system multiplication factor (k{sub eff}) by 55 mk, whereas the LATTICECELL and MULTIREGION treatments predict the k{sub eff} values with similar biases of approximately 10 mk overestimation. The DOUBLEHET result shows a more satisfactory agreement, about 4.2 mk underestimation in the k{sub eff} value. In addition, using cell-weighted cross sections instead of an explicit modeling of TRISO particles in fuel region can further reduce the computation time by a factor of 5 without sacrificing accuracy. (authors)

  11. Use of variations in unit cell length, reflectance and hardness for determining the origin of Fe disulphides in sedimentary rocks

    Science.gov (United States)

    Dill, H. G.; Eberhard, E.; Hartmann, B.

    1997-01-01

    Fe disulphides are common opaque accessories in sedimentary rocks. Both marcasite and pyrite may shed some light on the depositional environment and help determine the diagenesis of their host rocks. Quantitative ore microscopy (reflectance measurements, Vickers hardness numbers) and X-ray diffraction methods, supplemented with scanning electron microscopy and chemical analyses, were applied to pyrite (and some marcasite) hosted by sedimentary rocks spanning the interval from the Devonian to the Pliocene, and formed in various marine and continental environments. Quantitative ore microscopy of pyrites of sedimentary origin does not seem to be an efficient tool for analyzing the environment owing to the inhomogeneous nature of sulphide aggregates when viewed under the ore microscope, and the variable amounts of minor elements (e.g., As, Ni, and Co) that control the reflectance values (RV) and Vickers hardness numbers (VHN) of the host sulphides. However, such parameters as crystal habit and unit cell length of pyrite, which correlate with FeS x, are useful for environmental analysis. The redox conditions and the presence of organic remains during formation are the main factors determining these crystallographic parameters. Differences in these parameters from those of pure, ideal FeS 2 can be related to substitution of, e.g., wustite in the pyrite lattice, reflecting moderate oxidation (i.e. in the microenvironment). As far as crystal habit and length of the cell edge are concerned, late stage diagenesis is obviously less important than the microenvironment attending initial formation. The environment of deposition (i.e. the macroenvironment) of pyrite-bearing rocks has no influence on the crystal morphology or the length of the unit cell of Fe disulphide. X-ray diffraction measurements demonstrate that this method provides useful evidence on the microenvironment of sulphide precipitation around a single, equant pyrite, as well as around pyritized fossils.

  12. Compactified vacuum in ten dimensions

    International Nuclear Information System (INIS)

    Wurmser, D.

    1987-01-01

    Since the 1920's, theories which unify gravity with the other fundamental forces have called for more than the four observed dimensions of space-time. According to such a theory, the vacuum consists of flat four-dimensional space-time described by the Minkowski metric M 4 and a compactified space B. The dimensions of B are small, and the space can only be observed at distance scales smaller than the present experimental limit. These theories have had serious difficulties. The equations of gravity severely restrict the possible choices for the space B. The allowed spaces are complicated and difficult to study. The vacuum is furthermore unstable in the sense that a small perturbation causes the compactified dimensions to expand indefinitely. There is an addition a semi-classical argument which implies that the compactified vacuum by annihilated by virtual black holes. It follows that a universe with compactified extra dimensions could not have survived to the present. These results were derived by applying the equations of general relativity to spaces of more than four dimensions. The form of these equations was assumed to be unchanged by an increase in the number of dimensions. The authors illustrate the effect of such terms by considering the example B = S 6 where S 6 is the six-dimensional sphere. Only when the extra terms are included is this choice of the compactified space allowed. He explore the effect of a small perturbation on such a vacuum. The ten-dimensional spherically symmetric potential is examined, and I determine conditions under which the formation of virtual black holes is forbidden. The examples M 4 x S 6 is still plagued by the semi-classical instability, but this result does not hold in general. The requirement that virtual black holes be forbidden provides a test for any theory which predicts a compactified vacuum

  13. Semantic Differential Comparisons of Attributions and Dimensions among Seven Nations.

    Science.gov (United States)

    Chandler, Theodore A.; Spies, Carl J.

    The classifications of 11 attributions according to dimensions of locus, stability, controllability, predictability, and globality by participants in 7 countries (China, France, Germany, Hong Kong, Israel, Spain, and the United States) were compared in a cross-cultural study. The attributions were: (1) bias; (2) help; (3) luck; (4) ability; (5)…

  14. Performance evaluation of an open-cathode PEM fuel cell stack under ambient conditions: Case study of United Arab Emirates

    International Nuclear Information System (INIS)

    Al-Zeyoudi, Hend; Sasmito, Agus P.; Shamim, Tariq

    2015-01-01

    Highlights: • Performance evaluation of open-cathode PEM fuel cell stacks with forced air-convection. • Stack performance can vary up to 40% from winter to summer. • Hot and arid condition leads to membrane drying and performance deterioration. • Anode humidification improves the stack performance up to 40% during summer. - Abstract: The open-cathode polymer electrolyte membrane (PEM) fuel cell stack has been a promising candidate as a sustainable energy conversion system for replacing fossil fuel-based energy conversion devices in portable and automotive applications. As the ambient air is directly used to provide both oxidant and cooling, the complex cooling loop can be avoided which reduces the complexity and cost. However, the stack performance is highly affected by ambient conditions, i.e., ambient temperature and humidity. In this study, the effect of monthly ambient air conditions (temperature and humidity) is evaluated with respect to the stack’s power production performance as well as thermal, water and gas management by employing a validated three-dimensional open-cathode PEM fuel cell stack model. The annual climate data from the hot and arid environment of Abu Dhabi, United Arab Emirates (UAE) are used as a case study. The objective is to develop a better fundamental understanding of the interactions of physical phenomena in a fuel cell stack, which can assist in improving the performance and operation of an open-cathode PEM fuel cell-powered vehicle. The results indicate that the stack performance can vary significantly (up to 40%) from winter to summer, especially at high operating currents, with significant changes in the stack temperature and the water content at the membrane. Moreover, the anode humidification results in a significant improvement in the stack performance (up to 40%) in hot and dry conditions. However, a careful balance has to be struck between the humidifier parasitic load and the stack power.

  15. Rate of Opportunistic Pap Smear Screening and Patterns of Epithelial Cell Abnormalities in Pap Smears in Ajman, United Arab Emirates

    Science.gov (United States)

    Al Eyd, Ghaith J.; Shaik, Rizwana B.

    2012-01-01

    Objectives: The aim of this study was to estimate the proportion of women undergoing Papanicolaou (Pap) smear examinations, and the frequency of epithelial cell abnormalities in a teaching hospital in one emirate of the United Arab Emirates (UAE) during a three-year period. Methods: A retrospective study of 602 patient records from July 2007 to July 2010 was done in a teaching hospital in Ajman, UAE. The variables studied were age, ethnicity, menopausal status, and abnormalities in the Pap smear. Data were analysed using the Statistical Package for the Social Sciences and presented mainly as percentages; to assess associations, the chi-square test was used. Results: The total number of outpatients who attended the Obstetrics & Gynaecology Department from July 2007 to July 2010 was 150,111 patients, of which 602 (0.4% of the total) had a Pap smear test. The sample was 50.1% Arabs and 49.9% other nationalities. While 73% of the outpatients had specific complaints, 27% came for a routine screening. Epithelial cell abnormalities were seen in 3.3% of the sample, with atypical squamous cells of undetermined significance (ASCUS) found in 1.8%, low-grade squamous intraepithelial lesions (LSILs) found in 1.2%, and high-grade squamous intraepithelial lesions (HSILs) found in 0.3%. There were no cases of squamous cell carcinoma. Conclusion: Voluntary routine Pap smear screening was remarkably low in the study group. ASCUS was the most common epithelial cell abnormality. Community health education and opportunistic screening for cervical cancer are recommended for both national and expatriate women in the region. PMID:23275844

  16. Rate of Opportunistic Pap Smear Screening and Patterns of Epithelial Cell Abnormalities in Pap Smears in Ajman, United Arab Emirates

    Directory of Open Access Journals (Sweden)

    Rizwana B. Shaik

    2012-11-01

    Full Text Available Objectives: The aim of this study was to estimate the proportion of women undergoing Papanicolaou (Pap smear examinations, and the frequency of epithelial cell abnormalities in a teaching hospital in one emirate of the United Arab Emirates (UAE during a three-year period. Methods: A retrospective study of 602 patient records from July 2007 to July 2010 was done in a teaching hospital in Ajman, UAE. The variables studied were age, ethnicity, menopausal status, and abnormalities in the Pap smear. Data were analysed using the Statistical Package for the Social Sciences and presented mainly as percentages; to assess associations, the chi-square test was used. Results: The total number of outpatients who attended the Obstetrics & Gynaecology Department from July 2007 to July 2010 was 150,111 patients, of which 602 (0.4% of the total had a Pap smear test. The sample was 50.1% Arabs and 49.9% other nationalities. While 73% of the outpatients had specific complaints, 27% came for a routine screening. Epithelial cell abnormalities were seen in 3.3% of the sample, with atypical squamous cells of undetermined significance (ASCUS found in 1.8%, low-grade squamous intraepithelial lesions (LSILs found in 1.2%, and high-grade squamous intraepithelial lesions (HSILs found in 0.3%. There were no cases of squamous cell carcinoma. Conclusion: Voluntary routine Pap smear screening was remarkably low in the study group. ASCUS was the most common epithelial cell abnormality. Community health education and opportunistic screening for cervical cancer are recommended for both national and expatriate women in the region.

  17. On bosonization in 3 dimensions

    International Nuclear Information System (INIS)

    Barci, D.G.; Fosco, C.D.; Oxman, L.E.

    1995-08-01

    A recently proposed path-integral bosonization scheme for massive fermions in 3 dimensions is extended by keeping the full momentum-dependence of the one-loop vacuum polarization tensor. This makes it possible to discuss both the massive and massless fermion cases on an equal footing, and moreover the results it yields for massless fermions are consistent with the ones of another, seemingly different, canonical quantization approach to the problem of bosonization for a massless fermionic field in 3 dimensions. (author). 10 refs

  18. The Ethical Dimension of Innovation

    DEFF Research Database (Denmark)

    Nogueira, Leticia Antunes; Nogueira, Tadeu Fernando

    2014-01-01

    The view of innovation as a positive concept has been deeply rooted in business and academic cultures ever since Schumpeter coined the concept of creative destruction. Even though there is a large body of literature on innovation studies, limited attention has been given to its ethical dimension....... In this chapter, the ethical implications of innovations are illustrated with a case study of “destructive creation” in the food industry, and upon which an argumentative analysis is conducted. The main message of this chapter is that innovations have inherent ethical dimensions and that quality innovations...

  19. Physics with large extra dimensions

    CERN Document Server

    Antoniadis, Ignatios

    2004-01-01

    A theory with such a mathematical beauty cannot be wrong: this was one of the main arguments in favor of string theory, which unifies all known physical theories of fundamental interactions in a single coherent description of the universe. But no one has ever observed strings, not even indirectly, neither the space of extra dimensions where they live. However, there is a hope that the “hidden”dimensions of string theory are much larger than what we thought in the past and they become within experimental reach in the near future, together with the strings themselves.

  20. Quantum control in infinite dimensions

    International Nuclear Information System (INIS)

    Karwowski, Witold; Vilela Mendes, R.

    2004-01-01

    Accurate control of quantum evolution is an essential requirement for quantum state engineering, laser chemistry, quantum information and quantum computing. Conditions of controllability for systems with a finite number of energy levels have been extensively studied. By contrast, results for controllability in infinite dimensions have been mostly negative, stating that full control cannot be achieved with a finite-dimensional control Lie algebra. Here we show that by adding a discrete operation to a Lie algebra it is possible to obtain full control in infinite dimensions with a small number of control operators

  1. Quantum physics in one dimension

    CERN Document Server

    Giamarchi, Thierry

    2004-01-01

    This book presents in a pedagogical yet complete way correlated systems in one dimension. Recent progress in nanotechnology and material research have made one dimensional systems a crucial part of today's physics. After an introduction to the basic concepts of correlated systems, the book gives a step by step description of the techniques needed to treat one dimension, and discusses the resulting physics. Then specific experimental realizations of one dimensional systems such asspin chains, quantum wires, nanotubes, organic superconductors etc. are examined. Given its progressive and pedagogi

  2. Unit-cell design for two-dimensional phase-field simulation of microstructure evolution in single-crystal Ni-based superalloys during solidification

    Directory of Open Access Journals (Sweden)

    Dongjia Cao

    2017-12-01

    Full Text Available Phase-field simulation serves as an effective tool for quantitative characterization of microstructure evolution in single-crystal Ni-based superalloys during solidification nowadays. The classic unit cell is either limited to γ dendrites along crystal orientation or too ideal to cover complex morphologies for γ dendrites. An attempt to design the unit cell for two-dimensional (2-D phase-field simulations of microstructure evolution in single-crystal Ni-based superalloys during solidification was thus performed by using the MICRESS (MICRostructure Evolution Simulation Software in the framework of the multi-phase-field (MPF model, and demonstrated in a commercial TMS-113 superalloy. The coupling to CALPHAD (CALculation of PHAse Diagram thermodynamic database was realized via the TQ interface and the experimental diffusion coefficients were utilized in the simulation. Firstly, the classic unit cell with a single γ dendrite along crystal orientation was employed for the phase-field simulation in order to reproduce the microstructure features. Then, such simple unit cell was extended into the cases with two other different crystal orientations, i.e., and . Thirdly, for crystal orientations, the effect of γ dendritic orientations and unit cell sizes on microstructure and microsegregation was comprehensively studied, from which a new unit cell with multiple γ dendrites was proposed. The phase-field simulation with the newly proposed unit cell was further performed in the TMS-113 superalloy, and the microstructure features including the competitive growth of γ dendrites, microsegregation of different solutes and distribution of γ′ grains, can be nicely reproduced.

  3. Congenital and nosocomial sepsis in infants born in a regional perinatal unit: cause, outcome, and white blood cell response.

    Science.gov (United States)

    Ohlsson, A; Vearncombe, M

    1987-02-01

    The incidence, cause, and outcome of sepsis and the white blood cell response were studied in 6315 infants born in a regional perinatal unit. The incidence of neonatal sepsis was 6.5 per 1000 live births. Congenital sepsis (12 cases) was overwhelming, with associated maternal infection (92%), neutropenia (75%), and high rate of mortality (50%). The most common organism was Escherichia coli (58%). Gestational age and birth weight were similar in survivors and nonsurvivors. There was a strong correlation between total white blood cell count and both mature and immature neutrophil counts in survivors but this correlation decreased substantially in neonates that died. Analysis of variance indicated that the means for polymorphonuclear leukocyte and immature neutrophil counts were significantly higher in survivors. Nosocomial sepsis (38 cases) occurred in premature low birth weight infants receiving invasive, intensive care. The most common organism was Staphylococcus epidermidis (76%). Total white blood cell, polymorphonuclear leukocyte, and immature neutrophil counts rose significantly in response to sepsis. None died. Prevention of congenital sepsis requires methods to detect early maternal-fetal infection. Providing granulocytes to neutropenic neonates with congenital sepsis might improve outcome.

  4. Modeling the performance of hydrogen-oxygen unitized regenerative proton exchange membrane fuel cells for energy storage

    Science.gov (United States)

    Guarnieri, Massimo; Alotto, Piergiorgio; Moro, Federico

    2015-11-01

    Thanks to the independent sizing of power and energy, hydrogen-based energy storage is one of the very few technologies capable of providing long operational times in addition to the other advantages offered by electrochemical energy storage, for example scalability, site versatility, and mobile service. The typical design consists of an electrolyzer in charge mode and a separate fuel cell in discharge mode. Instead, a unitized regenerative fuel cell (URFC) is a single device performing both energy conversions, achieving a higher compactness and power-to-weight ratio. This paper presents a performance model of a URFC based on a proton exchange membrane (PEM) electrolyte and working on hydrogen and oxygen, which can provide high energy and power densities (>0.7 W cm-2). It provides voltage, power, and efficiency at varying load conditions as functions of the controlling physical quantities: temperature, pressure, concentration, and humidification. The model constitutes a tool for designing the interface and control sub-system as well as for exploring optimized cell/stack designs and operational conditions. To date, only a few of such analyses have been carried out and more research is needed in order to explore the true potential of URFCs.

  5. Fuel cell assembly unit for promoting fluid service and electrical conductivity

    Science.gov (United States)

    Jones, Daniel O.

    1999-01-01

    Fluid service and/or electrical conductivity for a fuel cell assembly is promoted. Open-faced flow channel(s) are formed in a flow field plate face, and extend in the flow field plate face between entry and exit fluid manifolds. A resilient gas diffusion layer is located between the flow field plate face and a membrane electrode assembly, fluidly serviced with the open-faced flow channel(s). The resilient gas diffusion layer is restrained against entering the open-faced flow channel(s) under a compressive force applied to the fuel cell assembly. In particular, a first side of a support member abuts the flow field plate face, and a second side of the support member abuts the resilient gas diffusion layer. The support member is formed with a plurality of openings extending between the first and second sides of the support member. In addition, a clamping pressure is maintained for an interface between the resilient gas diffusion layer and a portion of the membrane electrode assembly. Preferably, the support member is spikeless and/or substantially flat. Further, the support member is formed with an electrical path for conducting current between the resilient gas diffusion layer and position(s) on the flow field plate face.

  6. Curcumin-loaded embryonic stem cell exosomes restored neurovascular unit following ischemia-reperfusion injury.

    Science.gov (United States)

    Kalani, Anuradha; Chaturvedi, Pankaj; Kamat, Pradip K; Maldonado, Claudio; Bauer, Philip; Joshua, Irving G; Tyagi, Suresh C; Tyagi, Neetu

    2016-10-01

    We tested whether the combined nano-formulation, prepared with curcumin (anti-inflammatory and neuroprotective molecule) and embryonic stem cell exosomes (MESC-exo cur ), restored neurovascular loss following an ischemia reperfusion (IR) injury in mice. IR-injury was created in 8-10 weeks old mice and divided into two groups. Out of two IR-injured groups, one group received intranasal administration of MESC-exo cur for 7days. Similarly, two sham groups were made and one group received MESC-exo cur treatment. The study determined that MESC-exo cur treatment reduced neurological score, infarct volume and edema following IR-injury. As compared to untreated IR group, MESC-exo cur treated-IR group showed reduced inflammation and N-methyl-d-aspartate receptor expression. Treatment of MESC-exo cur also reduced astrocytic GFAP expression and alleviated the expression of NeuN positive neurons in IR-injured mice. In addition, MESC-exo cur treatment restored vascular endothelial tight (claudin-5 and occludin) and adherent (VE-cadherin) junction proteins in IR-injured mice as compared to untreated IR-injured mice. These results suggest that combining the potentials of embryonic stem cell exosomes and curcumin can help neurovascular restoration following ischemia-reperfusion injury in mice. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Continuous dimensions and evanescent couplings

    International Nuclear Information System (INIS)

    Bollini, C.G.; Giambiagi, J.J.

    1975-01-01

    Analytical solutions for the wave equation in many dimensional calculation, are given. The difference for even or odd number of dimensions is shown. The simplest cases of the lowest order divergent diagrams (self-energy, vacuum polarization) are discussed. Causal solution of Klein-Gordon equation is used [pt

  8. Quantum Gravity in Two Dimensions

    DEFF Research Database (Denmark)

    Ipsen, Asger Cronberg

    The topic of this thesis is quantum gravity in 1 + 1 dimensions. We will focus on two formalisms, namely Causal Dynamical Triangulations (CDT) and Dy- namical Triangulations (DT). Both theories regularize the gravity path integral as a sum over triangulations. The difference lies in the class...

  9. Massive particles in five dimensions

    International Nuclear Information System (INIS)

    Copeland, E.J.

    1985-01-01

    We consider a five-dimensional model of the universe with a dynamical extra dimension. Calculations of the ratio of the number density of Kolb and Slansky type pyrgons to that of photons show the model to be unacceptable. However by inserting N matter fields into the original action, it becomes possible to reduce the ratio below the observational bound. (orig.)

  10. Teachers' Careers: The Objective Dimension.

    Science.gov (United States)

    Evetts, Julia

    1986-01-01

    Analyzes the objective dimension of teachers' careers showing how 530 British male/female teachers are distributed throughout the pay scale and promotions making up the formal structure of teaching. Indicates length of experience is the rewarding but not the sole factor in bureaucratic structure and differential male/female career achievements.…

  11. THE DIMENSIONS OF COMPOSITION ANNOTATION.

    Science.gov (United States)

    MCCOLLY, WILLIAM

    ENGLISH TEACHER ANNOTATIONS WERE STUDIED TO DETERMINE THE DIMENSIONS AND PROPERTIES OF THE ENTIRE SYSTEM FOR WRITING CORRECTIONS AND CRITICISMS ON COMPOSITIONS. FOUR SETS OF COMPOSITIONS WERE WRITTEN BY STUDENTS IN GRADES 9 THROUGH 13. TYPESCRIPTS OF THE COMPOSITIONS WERE ANNOTATED BY CLASSROOM ENGLISH TEACHERS. THEN, 32 ENGLISH TEACHERS JUDGED…

  12. Unexploited Dimensions of Virtual Humans

    NARCIS (Netherlands)

    Ruttkay, Z.M.; Reidsma, Dennis; Huang, Thomas; Nijholt, Antinus; Pantic, Maja; Pentlant, Alex

    Virtual Humans are on the border of fiction and realism: while it is obvious that they do not exist in reality and function on different principles than real people, they have been endowed with human features such as being emotionally sensitive. In this article we argue that many dimensions, both

  13. String theory in four dimensions

    CERN Document Server

    1988-01-01

    ``String Theory in Four Dimensions'' contains a representative collection of papers dealing with various aspects of string phenomenology, including compactifications on smooth manifolds and more general conformal field theories. Together with the lucid introduction by M. Dine, this material gives the reader a good working knowledge of our present ideas for connecting string theory to nature.

  14. supersymmetry breaking with extra dimensions

    Indian Academy of Sciences (India)

    large number of parameters, there is no explanation for the origin and the stability of two different mass .... Theories formulated in more than four space-time dimensions have been discussed for several decades, starting from the historical papers by Kaluza and Klein on. 500 .... For the consistency of the orbifold construction,.

  15. Complex numbers in n dimensions

    CERN Document Server

    Olariu, Silviu

    2002-01-01

    Two distinct systems of hypercomplex numbers in n dimensions are introduced in this book, for which the multiplication is associative and commutative, and which are rich enough in properties such that exponential and trigonometric forms exist and the concepts of analytic n-complex function, contour integration and residue can be defined. The first type of hypercomplex numbers, called polar hypercomplex numbers, is characterized by the presence in an even number of dimensions greater or equal to 4 of two polar axes, and by the presence in an odd number of dimensions of one polar axis. The other type of hypercomplex numbers exists as a distinct entity only when the number of dimensions n of the space is even, and since the position of a point is specified with the aid of n/2-1 planar angles, these numbers have been called planar hypercomplex numbers. The development of the concept of analytic functions of hypercomplex variables was rendered possible by the existence of an exponential form of the n-complex numbe...

  16. The inner dimension of sustainability

    NARCIS (Netherlands)

    Horlings, L.G.

    2015-01-01

    Transformation to sustainability has been defined as the fundamental alteration of the nature of a system, once the current conditions become untenable or undesirable. Transformation requires a shift in people's values, referred to as the inner dimension of sustainability, or change from the

  17. Effective dimension in flocking mechanisms

    International Nuclear Information System (INIS)

    Baglietto, Gabriel; Albano, Ezequiel V.

    2011-01-01

    Even in its minimal representation (Vicsek Model, VM [T. Vicsek, A. Czirok, E. Ben-Jacob, I. Cohen and O. Shochet. Phys. Rev. Lett. 75, 1226 (1995).]), the widespread phenomenon of flocking raises intriguing questions to the statistical physicists. While the VM is very close to the better understood XY Model because they share many symmetry properties, a major difference arises by the fact that the former can sustain long-range order in two dimensions, while the latter can not. Aiming to contribute to the understanding of this feature, by means of extensive numerical simulations of the VM, we study the network structure of clusters showing that they can also sustain purely orientational, mean-field-like, long-range order. We identify the reason of this capability with the key concept of ''effective dimension.'' In fact, by analyzing the behavior of the average path length and the mean degree, we show that this dimension is very close to four, which coincides with the upper critical dimension of the XY Model, where orientational order is also of a mean-field nature. We expect that this methodology could be generalized to other types of dynamical systems.

  18. The Hidden Dimensions of Databases.

    Science.gov (United States)

    Jacso, Peter

    1994-01-01

    Discusses methods of evaluating commercial online databases and provides examples that illustrate their hidden dimensions. Topics addressed include size, including the number of records or the number of titles; the number of years covered; and the frequency of updates. Comparisons of Readers' Guide Abstracts and Magazine Article Summaries are…

  19. Dimensions of the Composing Process.

    Science.gov (United States)

    Freedman, Aviva

    As a by-product of a study concerning how university level writers develop new genres of discourse, a study was undertaken to examine what factors or dimensions affect the composing process of university writers. Six undergraduate students at Carleton University in Ottawa participated, making available to researchers information about how they…

  20. Correlation Dimension-Based Classifier

    Czech Academy of Sciences Publication Activity Database

    Jiřina, Marcel; Jiřina jr., M.

    2014-01-01

    Roč. 44, č. 12 (2014), s. 2253-2263 ISSN 2168-2267 R&D Projects: GA MŠk(CZ) LG12020 Institutional support: RVO:67985807 Keywords : classifier * multidimensional data * correlation dimension * scaling exponent * polynomial expansion Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 3.469, year: 2014

  1. Interpretation and the Aesthetic Dimension

    Science.gov (United States)

    Mortensen, Charles O.

    1976-01-01

    The author, utilizing a synthesis of philosophic comments on aesthetics, provides a discourse on the aesthetic dimension and offers examples of how interpreters can nurture the innate sense of beauty in man. Poetic forms, such as haiku, are used to relate the aesthetic relationship between man and the environment. (BT)

  2. Correlation Dimension Estimation for Classification

    Czech Academy of Sciences Publication Activity Database

    Jiřina, Marcel; Jiřina jr., M.

    2006-01-01

    Roč. 1, č. 3 (2006), s. 547-557 ISSN 1895-8648 R&D Projects: GA MŠk(CZ) 1M0567 Institutional research plan: CEZ:AV0Z10300504 Keywords : correlation dimension * probability density estimation * classification * UCI MLR Subject RIV: BA - General Mathematics

  3. Extra dimensions round the corner?

    International Nuclear Information System (INIS)

    Abel, S.

    1999-01-01

    How many dimensions are we living in? This question is fundamental and yet, astonishingly, it remains unresolved. Of course, on the everyday level it appears that we are living in four dimensions three space plus one time dimension. But in recent months theoretical physicists have discovered that collisions between high-energy particles at accelerators may reveal the presence of extra space-time dimensions. On scales where we can measure the acceleration of falling objects due to gravity or study the orbital motion of planets or satellites, the gravitational force seems to be described by a 1/r 2 law. The most sensitive direct tests of the gravitational law are based on torsion-balance experiments that were first performed by Henry Cavendish in 1798. However, the smallest scales on which this type of experiment can be performed are roughly 1 mm (see J C Long, H W Chan and J C Price 1999 Nucl. Phys. B 539 23). At smaller distances, objects could be gravitating in five or more dimensions that are rolled up or ''compactified'' - an idea that is bread-and-butter to string theorists. Most string theorists however believe that the gravitational effects of compact extra dimensions are too small to be observed. Now Nima Arkani-Hamed from the Stanford Linear Accelerator Center (SLAC) in the US, Savas Dimopoulos at Stanford University and Gia Dvali, who is now at New York University, suggest differently (Phys. Lett. B 1998 429 263). They advanced earlier ideas from string theory in which the strong, weak and electromagnetic forces are confined to membranes, like dirt particles trapped in soap bubbles, while the gravitational force operates in the entire higher-dimensional volume. In their theory extra dimensions should have observable effects inside particle colliders such as the Tevatron accelerator at Fermilab in the US or at the future Large Hadron Collider at CERN. The effect will show up as an excess of events in which a single jet of particles is produced with no

  4. Rising population of survivors of oral squamous cell cancer in the United States.

    Science.gov (United States)

    Patel, Mira A; Blackford, Amanda L; Rettig, Eleni M; Richmon, Jeremy D; Eisele, David W; Fakhry, Carole

    2016-05-01

    The incidence of oropharyngeal cancer (OPC) and a subset of oral cavity cancer (OCC) is increasing in the United States. To the authors' knowledge, the presumed growing prevalence of survivors of OPC and OCC has not been investigated to date. Retrospective analysis of Surveillance, Epidemiology, and End Results data (1975-2012) estimated changes in incidence, 5-year cause-specific survival, and prevalence for OPC and OCC. Changes in incidence, cause-specific survival and prevalence were estimated by linear regression and expressed as the percentage change (B). Differences in incidence trends over time were determined by joinpoint analysis. The incidence of OPC increased by 62.6% from 1975 through 2012. Notable increases in OPC incidence were observed among men, white individuals, and those of younger ages. The 5-year survival for OPC increased significantly for all sexes, races, and individuals aged >30 years, with white individuals and males experiencing the largest increase in survival. By contrast, the incidence of OCC declined by 22.3% during the same time period. OCC incidence decreased across all groups but increased among individuals aged 30 to 39 years. Significant increases in survival were observed for OCC, except for those who were female, black, and aged American Cancer Society. © 2016 American Cancer Society.

  5. Tetraspanin-enriched microdomains: a functional unit in cell plasma membranes.

    Science.gov (United States)

    Yáñez-Mó, María; Barreiro, Olga; Gordon-Alonso, Mónica; Sala-Valdés, Mónica; Sánchez-Madrid, Francisco

    2009-09-01

    Membrane lipids and proteins are non-randomly distributed and are unable to diffuse freely in the plane of the membrane. This is because of multiple constraints imposed both by the cortical cytoskeleton and by the preference of lipids and proteins to cluster into diverse and specialized membrane domains, including tetraspanin-enriched microdomains, glycosylphosphatidyl inositol-linked proteins nanodomains and caveolae, among others. Recent biophysical characterization of tetraspanin-enriched microdomains suggests that they might be specially suited for the regulation of avidity of adhesion receptors and the compartmentalization of enzymatic activities. Moreover, modulation by tetraspanins of the function of adhesion receptors involved in inflammation, lymphocyte activation, cancer and pathogen infection suggests potential as therapeutic targets. This review explores this emerging picture of tetraspanin microdomains and discusses the implications for cell adhesion, proteolysis and pathogenesis.

  6. A Unit-Cell Model for Predicting the Elastic Constants of 3D Four Directional Cylindrical Braided Composite Shafts

    Science.gov (United States)

    Hao, Wenfeng; Liu, Ye; Huang, Xinrong; Liu, Yinghua; Zhu, Jianguo

    2018-06-01

    In this work, the elastic constants of 3D four directional cylindrical braided composite shafts were predicted using analytical and numerical methods. First, the motion rule of yarn carrier of 3D four directional cylindrical braided composite shafts was analyzed, and the horizontal projection of yarn motion trajectory was obtained. Then, the geometry models of unit-cells with different braiding angles and fiber volume contents were built up, and the meso-scale models of 3D cylindrical braided composite shafts were obtained. Finally, the effects of braiding angles and fiber volume contents on the elastic constants of 3D braided composite shafts were analyzed theoretically and numerically. These results play a crucial role in investigating the mechanical properties of 3D 4-directional braided composites shafts.

  7. Successful implementation of a packed red blood cell and fresh frozen plasma transfusion protocol in the surgical intensive care unit.

    Directory of Open Access Journals (Sweden)

    Benjamin E Szpila

    Full Text Available Blood product transfusions are associated with increased morbidity and mortality. The purpose of this study was to determine if implementation of a restrictive protocol for packed red blood cell (PRBC and fresh frozen plasma (FFP transfusion safely reduces blood product utilization and costs in a surgical intensive care unit (SICU.We performed a retrospective, historical control analysis comparing before (PRE and after (POST implementation of a restrictive PRBC/FFP transfusion protocol for SICU patients. Univariate analysis was utilized to compare patient demographics and blood product transfusion totals between the PRE and POST cohorts. Multivariate logistic regression models were developed to determine if implementation of the restrictive transfusion protocol is an independent predictor of adverse outcomes after controlling for age, illness severity, and total blood products received.829 total patients were included in the analysis (PRE, n=372; POST, n=457. Despite higher mean age (56 vs. 52 years, p=0.01 and APACHE II scores (12.5 vs. 11.2, p=0.006, mean units transfused per patient were lower for both packed red blood cells (0.7 vs. 1.2, p=0.03 and fresh frozen plasma (0.3 vs. 1.2, p=0.007 in the POST compared to the PRE cohort, respectively. There was no difference in inpatient mortality between the PRE and POST cohorts (7.5% vs. 9.2%, p=0.39. There was a decreased risk of urinary tract infections (OR 0.47, 95%CI 0.28-0.80 in the POST cohort after controlling for age, illness severity and amount of blood products transfused.Implementation of a restrictive transfusion protocol can effectively reduce blood product utilization in critically ill surgical patients with no increase in morbidity or mortality.

  8. Integrable nonlinear Schrödinger system on a lattice with three structural elements in the unit cell

    Science.gov (United States)

    Vakhnenko, Oleksiy O.

    2018-05-01

    Developing the idea of increasing the number of structural elements in the unit cell of a quasi-one-dimensional lattice as applied to the semi-discrete integrable systems of nonlinear Schrödinger type, we construct the zero-curvature representation for the general integrable nonlinear system on a lattice with three structural elements in the unit cell. The integrability of the obtained general system permits to find explicitly a number of local conservation laws responsible for the main features of system dynamics and in particular for the so-called natural constraints separating the field variables into the basic and the concomitant ones. Thus, considering the reduction to the semi-discrete integrable system of nonlinear Schrödinger type, we revealed the essentially nontrivial impact of concomitant fields on the Poisson structure and on the whole Hamiltonian formulation of system dynamics caused by the nonzero background values of these fields. On the other hand, the zero-curvature representation of a general nonlinear system serves as an indispensable key to the dressing procedure of system integration based upon the Darboux transformation of the auxiliary linear problem and the implicit Bäcklund transformation of field variables. Due to the symmetries inherent to the six-component semi-discrete integrable nonlinear Schrödinger system with attractive-type nonlinearities, the Darboux-Bäcklund dressing scheme is shown to be simplified considerably, giving rise to the appropriately parameterized multi-component soliton solution consisting of six basic and four concomitant components.

  9. Efficient particle-in-cell simulation of auroral plasma phenomena using a CUDA enabled graphics processing unit

    Science.gov (United States)

    Sewell, Stephen

    This thesis introduces a software framework that effectively utilizes low-cost commercially available Graphic Processing Units (GPUs) to simulate complex scientific plasma phenomena that are modeled using the Particle-In-Cell (PIC) paradigm. The software framework that was developed conforms to the Compute Unified Device Architecture (CUDA), a standard for general purpose graphic processing that was introduced by NVIDIA Corporation. This framework has been verified for correctness and applied to advance the state of understanding of the electromagnetic aspects of the development of the Aurora Borealis and Aurora Australis. For each phase of the PIC methodology, this research has identified one or more methods to exploit the problem's natural parallelism and effectively map it for execution on the graphic processing unit and its host processor. The sources of overhead that can reduce the effectiveness of parallelization for each of these methods have also been identified. One of the novel aspects of this research was the utilization of particle sorting during the grid interpolation phase. The final representation resulted in simulations that executed about 38 times faster than simulations that were run on a single-core general-purpose processing system. The scalability of this framework to larger problem sizes and future generation systems has also been investigated.

  10. Cultural prototypes and dimensions of honor.

    Science.gov (United States)

    Cross, Susan E; Uskul, Ayse K; Gerçek-Swing, Berna; Sunbay, Zeynep; Alözkan, Cansu; Günsoy, Ceren; Ataca, Bilge; Karakitapoglu-Aygün, Zahide

    2014-02-01

    Research evidence and theoretical accounts of honor point to differing definitions of the construct in differing cultural contexts. The current studies address the question "What is honor?" using a prototype approach in Turkey and the Northern United States. Studies 1a/1b revealed substantial differences in the specific features generated by members of the two groups, but Studies 2 and 3 revealed cultural similarities in the underlying dimensions of self-respect, moral behavior, and social status/respect. Ratings of the centrality and personal importance of these factors were similar across the two groups, but their association with other relevant constructs differed. The tripartite nature of honor uncovered in these studies helps observers and researchers alike understand how diverse responses to situations can be attributed to honor. Inclusion of a prototype analysis into the literature on honor cultures can provide enhanced coverage of the concept that may lead to testable hypotheses and new theoretical developments.

  11. Online estimation of internal stack temperatures in solid oxide fuel cell power generating units

    Science.gov (United States)

    Dolenc, B.; Vrečko, D.; Juričić, Ɖ.; Pohjoranta, A.; Pianese, C.

    2016-12-01

    Thermal stress is one of the main factors affecting the degradation rate of solid oxide fuel cell (SOFC) stacks. In order to mitigate the possibility of fatal thermal stress, stack temperatures and the corresponding thermal gradients need to be continuously controlled during operation. Due to the fact that in future commercial applications the use of temperature sensors embedded within the stack is impractical, the use of estimators appears to be a viable option. In this paper we present an efficient and consistent approach to data-driven design of the estimator for maximum and minimum stack temperatures intended (i) to be of high precision, (ii) to be simple to implement on conventional platforms like programmable logic controllers, and (iii) to maintain reliability in spite of degradation processes. By careful application of subspace identification, supported by physical arguments, we derive a simple estimator structure capable of producing estimates with 3% error irrespective of the evolving stack degradation. The degradation drift is handled without any explicit modelling. The approach is experimentally validated on a 10 kW SOFC system.

  12. Resonance region neutronics of unit cells in fast and thermal reactors

    International Nuclear Information System (INIS)

    Salehi, A.A.; Driscoll, M.J.; Deutsch, O.L.

    1977-05-01

    A method has been developed for generating resonance-self-shielded cross sections based upon an improved equivalence theorem, which appears to allow extension of the self-shielding-factor (Bondarenko f-factor) method, now mainly applied to fast reactors, to thermal reactors as well. The method is based on the use of simple prescriptions for the ratio of coolant-to-fuel region-averaged fluxes, in the equations defining cell averaged cross sections. Linearization of the dependence of these functions on absorber optical thickness is found to be a necessary and sufficient condition for the existence of an equivalence theorem. Results are given for cylindrical, spherical and slab geometries. The functional form of the flux ratio relations is developed from theoretical considerations, but some of the parameters are adjusted to force-fit numerical results. Good agreement over the entire range of fuel and coolant optical thicknesses is demonstrated with numerical results calculated using the ANISN program in the S 8 P 1 option

  13. Computation of a Canadian SCWR unit cell with deterministic and Monte Carlo codes

    International Nuclear Information System (INIS)

    Harrisson, G.; Marleau, G.

    2012-01-01

    The Canadian SCWR has the potential to achieve the goals that the generation IV nuclear reactors must meet. As part of the optimization process for this design concept, lattice cell calculations are routinely performed using deterministic codes. In this study, the first step (self-shielding treatment) of the computation scheme developed with the deterministic code DRAGON for the Canadian SCWR has been validated. Some options available in the module responsible for the resonance self-shielding calculation in DRAGON 3.06 and different microscopic cross section libraries based on the ENDF/B-VII.0 evaluated nuclear data file have been tested and compared to a reference calculation performed with the Monte Carlo code SERPENT under the same conditions. Compared to SERPENT, DRAGON underestimates the infinite multiplication factor in all cases. In general, the original Stammler model with the Livolant-Jeanpierre approximations are the most appropriate self-shielding options to use in this case of study. In addition, the 89 groups WIMS-AECL library for slight enriched uranium and the 172 groups WLUP library for a mixture of plutonium and thorium give the most consistent results with those of SERPENT. (authors)

  14. Closure Report for Corrective Action Unit 116: Area 25 Test Cell C Facility, Nevada National Security Site, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Restoration

    2011-09-29

    This Closure Report (CR) presents information supporting closure of Corrective Action Unit (CAU) 116, Area 25 Test Cell C Facility. This CR complies with the requirements of the Federal Facility Agreement and Consent Order (FFACO) that was agreed to by the State of Nevada; the U.S. Department of Energy (DOE), Environmental Management; the U.S. Department of Defense; and DOE, Legacy Management (FFACO, 1996 [as amended March 2010]). CAU 116 consists of the following two Corrective Action Sites (CASs), located in Area 25 of the Nevada National Security Site: (1) CAS 25-23-20, Nuclear Furnace Piping and (2) CAS 25-41-05, Test Cell C Facility. CAS 25-41-05 consisted of Building 3210 and the attached concrete shield wall. CAS 25-23-20 consisted of the nuclear furnace piping and tanks. Closure activities began in January 2007 and were completed in August 2011. Activities were conducted according to Revision 1 of the Streamlined Approach for Environmental Restoration Plan for CAU 116 (U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office [NNSA/NSO], 2008). This CR provides documentation supporting the completed corrective actions and provides data confirming that closure objectives for CAU 116 were met. Site characterization data and process knowledge indicated that surface areas were radiologically contaminated above release limits and that regulated and/or hazardous wastes were present in the facility.

  15. Interhospital Variability in Perioperative Red Blood Cell Ordering Patterns in United States Pediatric Surgical Patients.

    Science.gov (United States)

    Thompson, Rachel M; Thurm, Cary W; Rothstein, David H

    2016-10-01

    To evaluate perioperative red blood cell (RBC) ordering and interhospital variability patterns in pediatric patients undergoing surgical interventions at US children's hospitals. This is a multicenter cross-sectional study of children aged blood type and crossmatch were included when done on the day before or the day of the surgical procedure. The RBC transfusions included were those given on the day of or the day after surgery. The type and crossmatch-to-transfusion ratio (TCTR) was calculated for each surgical procedure. An adjusted model for interhospital variability was created to account for variation in patient population by age, sex, race/ethnicity, payer type, and presence/number of complex chronic conditions (CCCs) per patient. A total of 357 007 surgical interventions were identified across all participating hospitals. Blood type and crossmatch was performed 55 632 times, and 13 736 transfusions were provided, for a TCTR of 4:1. There was an association between increasing age and TCTR (R(2) = 0.43). Patients with multiple CCCs had lower TCTRs, with a stronger relationship (R(2) = 0.77). There was broad variability in adjusted TCTRs among hospitals (range, 2.5-25). The average TCTR in US children's hospitals was double that of adult surgical data, and was associated with wide interhospital variability. Age and the presence of CCCs markedly influenced this ratio. Studies to evaluate optimal preoperative RBC ordering and standardization of practices could potentially decrease unnecessary costs and wasted blood. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. INTERDEPENDENCE BETWEEN RELATIONSHIP QUALITY DIMENSIONS

    Directory of Open Access Journals (Sweden)

    Mario Pepur

    2011-02-01

    Full Text Available Tourism-dependent economy, unfavourable structure of accommodation and hotel capacity, seasonality of business and liquidity problems indicate importance of the relationships between hotels and banks in Croatia. Since the capital investments in new and modern capacities are necessity, the quality of their relationship would determine the future of Croatian economy as a whole in the long run. Regarding the capital investments, it is crucially important that cooperation between the employees in both business entities is based on the satisfaction, trust and commitment. In this way, every potential uncertainty as a consequence of the entity’s actions could be minimized. In this paper, 356 tourist objects are hierarchically clustered according to the relationship quality dimensions for the purpose of testing the characteristics according to which the clusters significantly differentiate. Consequently, the interdependence between the observed relationship quality dimensions is examined.

  17. The Creative Dimension of Visuality

    DEFF Research Database (Denmark)

    Michelsen, Anders Ib

    2013-01-01

    This essay reflects critically on the notion of visuality, a centrepiece of current theory on visual culture and its underlying idea of a structural ‘discursive determination’ of visual phenomena. Is the visual really to be addressed through the post-war heritage of discourse and representation...... analysis relying on language/linguistics as a model for explaining culture? More specifically, how can the – creative – novelty of visual culture be addressed by a notion of discourse? This essay will argue that the debate on visual culture is lacking with regard to discerning the creative dimension of its...... and the invisible’ to the notion of collective creativity and ‘the imaginary institution of society’ of Cornelius Castoriadis. In the theoretical relationship between Merleau-Ponty and Castoriadis it is possible to indicate a notion of visuality as a creative dimension....

  18. Flavour physics from extra dimensions

    CERN Document Server

    Martinelli, G; Scrucca, C A; Silvestrini, L

    2004-01-01

    We discuss the possibility of introducing an SU(2) global flavour symmetry in the context of flat extra dimensions. In particular we concentrate on the 5-dimensional case and we study how to obtain the flavour structure of the Standard Model quark sector compacti(ying the fifth dimension on the orbifold St/Z2 a la Scberk-Scbwarz (SS). We show that in this case it is possible to justify the five orders of magnitude among the values of the quark masses with only one parameter: the SS flavour parameter. The non-local nature of the SS symmetry breaking mechanism allows to realize this without introducing new instabilities in the theory.

  19. String theory in four dimensions

    International Nuclear Information System (INIS)

    Dine, M.

    1988-01-01

    A representative sample of current ideas about how one might develop a string phenomenology is presented. Some of the obstacles which lie in between string theory and contact with experiment are described. It is hoped that this volume will provide the reader with ways of thinking about string theory in four dimensions and provide tools for asking questions about string theory and ordinary physics. 102 refs

  20. The social dimensions of entrepreneurship

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    2005-01-01

    This paper proposes an integrative framework to conceptualize important social dimensions of entrepreneurship. The paper reviews and evaluates the current status of research dealing with entrepreneurship, social capital and trust. The proposed framework rests on the recognition that entrepreneurial...... activities are results of social interactions and mechanisms. In consequence, entrepreneurship cannot merely be understood in terms of "personality characteristics" or in sterile economic terms. In closing, the paper addresses implications for practitioners and for research. Udgivelsesdato: AUG...

  1. The social dimension of entrepreneurship

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    2005-01-01

    This paper proposes an integrative framework to conceptualize important social dimensions of entrepreneurship. The paper reviews and evaluates the current status of research dealing with entrepreneurship, social capital and trust. The proposed framework rests on the recognition that entrepreneurial...... activities are results of social interactions and mechanisms. In consequence, entrepreneurship cannot merely be understood in terms of 'personality characteristics' or in sterile economic terms. The paper addresses by concluding implications for practitioners and for research....

  2. RELIGIOUS DIMENSION OF COMPUTER GAMES

    OpenAIRE

    Sukhov, Anton

    2017-01-01

    Modern computer games are huge virtual worlds that raisesophisticated social and even religious issues. The “external” aspect of thereligious dimension of computer games focuses on the problem of the polysemanticrelation of world religions (Judaism,Christianity, Islam, Buddhism) to computer games. The“inner” aspect represents transformation of monotheistic and polytheisticreligions within the virtual worlds in the view of heterogeneity and genredifferentiation of computer games (arcades, acti...

  3. Cultural Dimensions of Military Training

    Science.gov (United States)

    2014-06-13

    to military, and to make them able to operate effectively in multicultural dimensions. This cultural impact forced the military doctrine to adapt...degree the research findings and conclusions. The bibliography reviewed for this thesis is available at the Combined Arms Research Library . Unfortunately...in terms of increased ability of understanding and operating in a different cultural or multicultural setting, led the military decision makers to

  4. Schwinger Model Mass Anomalous Dimension

    CERN Document Server

    Keegan, Liam

    2016-06-20

    The mass anomalous dimension for several gauge theories with an infrared fixed point has recently been determined using the mode number of the Dirac operator. In order to better understand the sources of systematic error in this method, we apply it to a simpler model, the massive Schwinger model with two flavours of fermions, where analytical results are available for comparison with the lattice data.

  5. Quantum matrices in two dimensions

    International Nuclear Information System (INIS)

    Ewen, H.; Ogievetsky, O.; Wess, J.

    1991-01-01

    Quantum matrices in two-dimensions, admitting left and right quantum spaces, are classified: they fall into two families, the 2-parametric family GL p,q (2) and a 1-parametric family GL α J (2). Phenomena previously found for GL p,q (2) hold in this general situation: (a) powers of quantum matrices are again quantum and (b) entries of the logarithm of a two-dimensional quantum matrix form a Lie algebra. (orig.)

  6. Cosmic censorship in higher dimensions

    International Nuclear Information System (INIS)

    Goswami, Rituparno; Joshi, Pankaj S.

    2004-01-01

    We show that the naked singularities arising in dust collapse from smooth initial data (which include those discovered by Eardley and Smarr, Christodoulou, and Newman) are removed when we make a transition to higher dimensional spacetimes. Cosmic censorship is then restored for dust collapse, which will always produce a black hole as the collapse end state for dimensions D≥6, under conditions to be motivated physically such as the smoothness of initial data from which the collapse develops

  7. Simulation of a tubular solid oxide fuel cell stack using AspenPlusTM unit operation models

    International Nuclear Information System (INIS)

    Zhang, W.; Croiset, E.; Douglas, P.L.; Fowler, M.W.; Entchev, E.

    2005-01-01

    The design of a fuel cell system involves both optimization of the fuel cell stack and the balance of plant with respect to efficiency and economics. Many commercially available process simulators, such as AspenPlus TM , can facilitate the analysis of a solid oxide fuel cell (SOFC) system. A SOFC system may include fuel pre-processors, heat exchangers, turbines, bottoming cycles, etc., all of which can be very effectively modelled in process simulation software. The current challenge is that AspenPlus TM or any other commercial process simulators do not have a model of a basic SOFC stack. Therefore, to enable performing SOFC system simulation using one of these simulators, one must construct an SOFC stack model that can be implemented in them. The most common approach is to develop a complete SOFC model in a programming language, such as Fortran, Visual Basic or C++, first and then link it to a commercial process simulator as a user defined model or subroutine. This paper introduces a different approach to the development of a SOFC model by utilizing existing AspenPlus TM functions and existing unit operation modules. The developed ''AspenPlus TM SOFC'' model is able to provide detailed thermodynamic and parametric analyses of the SOFC operation and can easily be extended to study the entire power plant consisting of the SOFC and the balance of plant without the requirement for linking with other software. Validation of this model is performed by comparison to a Siemens-Westinghouse 100 kW class tubular SOFC stack. Sensitivity analyses of major operating parameters, such as utilization factor (U f ), current density (I c ) and steam-carbon ratio (S/C), were performed using the developed model, and the results are discussed in this paper

  8. Wave equations in higher dimensions

    CERN Document Server

    Dong, Shi-Hai

    2011-01-01

    Higher dimensional theories have attracted much attention because they make it possible to reduce much of physics in a concise, elegant fashion that unifies the two great theories of the 20th century: Quantum Theory and Relativity. This book provides an elementary description of quantum wave equations in higher dimensions at an advanced level so as to put all current mathematical and physical concepts and techniques at the reader’s disposal. A comprehensive description of quantum wave equations in higher dimensions and their broad range of applications in quantum mechanics is provided, which complements the traditional coverage found in the existing quantum mechanics textbooks and gives scientists a fresh outlook on quantum systems in all branches of physics. In Parts I and II the basic properties of the SO(n) group are reviewed and basic theories and techniques related to wave equations in higher dimensions are introduced. Parts III and IV cover important quantum systems in the framework of non-relativisti...

  9. Optimal stochastic coordinated scheduling of proton exchange membrane fuel cell-combined heat and power, wind and photovoltaic units in micro grids considering hydrogen storage

    International Nuclear Information System (INIS)

    Bornapour, Mosayeb; Hooshmand, Rahmat-Allah; Khodabakhshian, Amin; Parastegari, Moein

    2017-01-01

    Highlights: •Stochastic model is proposed for coordinated scheduling of renewable energy sources. •The effect of combined heat and power is considered. •Hydrogen storage is considered for fuel cells. •Maximizing profits of micro grid is considered as objective function. •Considering the uncertainties of problem lead to profit increasing. -- Abstract: Nowadays, renewable energy sources and combined heat and power units are extremely used in micro grids, so it is necessary to schedule these units to improve the performance of the system. In this regard, a stochastic model is proposed in this paper to schedule proton exchange membrane fuel cell-combined heat and power, wind turbines, and photovoltaic units coordinately in a micro grid while considering hydrogen storage. Hydrogen storage strategy is considered for the operation of proton exchange membrane fuel cell-combined heat and power units. To consider stochastic generation of renewable energy source units in this paper, a scenario-based method is used. In this method, the uncertainties of electrical market price, the wind speed, and solar irradiance are considered. This stochastic scheduling problem is a mixed integer- nonlinear programming which considers the proposed objective function and variables of coordinated scheduling of PEMFC-CHP, wind turbines and photovoltaic units. It also considers hydrogen storage strategy and converts it to a mixed integer nonlinear problem. In this study a modified firefly algorithm is used to solve the problem. This method is examined on modified 33-bus distributed network as a MG for its performance.

  10. Hispanics have the lowest stem cell transplant utilization rate for autologous hematopoietic cell transplantation for multiple myeloma in the United States: A CIBMTR report.

    Science.gov (United States)

    Schriber, Jeffrey R; Hari, Parameswaran N; Ahn, Kwang Woo; Fei, Mingwei; Costa, Luciano J; Kharfan-Dabaja, Mohamad A; Angel-Diaz, Miguel; Gale, Robert P; Ganguly, Siddharatha; Girnius, Saulius K; Hashmi, Shahrukh; Pawarode, Attaphol; Vesole, David H; Wiernik, Peter H; Wirk, Baldeep M; Marks, David I; Nishihori, Taiga; Olsson, Richard F; Usmani, Saad Z; Mark, Tomer M; Nieto, Yago L; D'Souza, Anita

    2017-08-15

    Race/ethnicity remains an important barrier in clinical care. The authors investigated differences in the receipt of autologous hematopoietic cell transplantation (AHCT) among patients with multiple myeloma (MM) and outcomes based on race/ethnicity in the United States. The Center for International Blood and Marrow Transplant Research database was used to identify 28,450 patients who underwent AHCT for MM from 2008 through 2014. By using data from the National Cancer Institute's Surveillance, Epidemiology, and End Results 18 registries, the incidence of MM was calculated, and a stem cell transplantation utilization rate (STUR) was derived. Post-AHCT outcomes were analyzed among patients ages 18 to 75 years who underwent melphalan-conditioned peripheral cell grafts (N = 24,102). The STUR increased across all groups from 2008 to 2014. The increase was substantially lower among Hispanics (range, 8.6%-16.9%) and non-Hispanic blacks (range, 12.2%-20.5%) compared with non-Hispanic whites (range, 22.6%-37.8%). There were 18,046 non-Hispanic whites, 4123 non-Hispanic blacks, and 1933 Hispanic patients. The Hispanic group was younger (P blacks (42%) compared with non-Hispanic whites (56%). A Karnofsky score 3 were more common in non-Hispanic blacks compared with Hispanic and non-Hispanic whites (P blacks (54%) and non-Hispanic whites (52%; P blacks (45%) and non-Hispanic whites (44%) had a very good partial response or better before transplantation (P = .005). Race/ethnicity did not impact post-AHCT outcomes. Although the STUR increased, it remained low and was significantly lower among Hispanics followed by non-Hispanic blacks compared with non-Hispanic whites. Race/ethnicity did not impact transplantation outcomes. Efforts to increase the rates of transplantation for eligible patients who have MM, with an emphasis on groups that underuse transplantation, are warranted. Cancer 2017;123:3141-9. © 2017 American Cancer Society. © 2017 American Cancer Society.

  11. HOFSTEDE’S CULTURAL DIMENSIONS AND MANAGEMENT IN CORPORATIONS

    Directory of Open Access Journals (Sweden)

    Alexandrina Cristina VASILE

    2016-06-01

    Full Text Available In many cases the success or failure in management is caused by the way leaders understand the cultural environment the companies develop. The leadership approach and rules applied increase or decrease performance in economies and companies. The paper describes the relation between management failure or success and the management adjustment to the cultural dimensions. People build organizations and rule them according to their values, but in the corporation field specific values might be successfully applied or implying the whole company failure. The analysis is made based on Hofstede research and having in mind his dimensions on a dynamic hypothetical case where there are taken into account cultural dimensions for Romania, Germany, Kazakhstan and United States of America.

  12. Trends in age and red blood cell donation habits among several racial/ethnic minority groups in the United States.

    Science.gov (United States)

    Yazer, Mark H; Vassallo, Ralph; Delaney, Meghan; Germain, Marc; Karafin, Matthew S; Sayers, Merlyn; van de Watering, Leo; Shaz, Beth H

    2017-07-01

    To meet the needs of a diverse patient population, an adequate supply of red blood cells (RBCs) from ethnic/racial minority donors is essential. We previously described the 10-year changes in minority blood donation in the United States. This study describes donation patterns by donor status, age, and race/ethnicity. Data on the age and the number of unique black/African American, Hispanic/Latino, Asian, and white RBC donors were obtained from eight US blood collectors for 2006, 2009, 2012, and 2015. Donors self-identified their race/ethnicity. First-time (FT) and repeat (R) donors were analyzed separately. Overall, for both FT and R donor groups, whites constituted the majority of unique donors (FT 66.7% and R 82.7%) and also donated the greatest proportion of RBC units (FT 66.6% and R 83.8%). Donors less than 20 years old comprised the greatest proportion of FT donors for all racial/ethnic groups (39.2%) and had the highest mean number of RBC donations per donor (1.12) among FT donors. Conversely, R donors less than 20 years old had some of the lowest mean number of RBC donations per donor (1.55) among R donors, whereas R donors at least 60 years old had the highest mean (1.88). Year by year, the percentage of FT donors who were less than 20 years old increased for all race/ethnicities. For R donors, whites were more frequently older, while Hispanics/Latinos and Asians were younger. Greater efforts to convert FT donors less than 20 years into R donors should be undertaken to ensure the continued diversity of the blood supply. © 2017 AABB.

  13. The connection between human papillomavirus and oropharyngeal squamous cell carcinomas in the United States: implications for dentistry.

    Science.gov (United States)

    Cleveland, Jennifer L; Junger, Michele L; Saraiya, Mona; Markowitz, Lauri E; Dunne, Eileen F; Epstein, Joel B

    2011-08-01

    Results from studies conducted in the past several years suggest that some oropharyngeal cancers, those of the base of the tongue and the tonsils, are associated with high-risk types of human papillomavirus (HPV). In this article, the authors summarize the available evidence regarding the epidemiology of HPV-associated oropharyngeal cancers in the United States, the available HPV vaccines and the implications of these for dentistry. They also examine the differences in HPV prevalence between cancers of the oral cavity and those of the oropharynx. The authors searched PubMed, Web of Science, The Cochrane Library and the National Guideline Clearinghouse to identify English-language systematic reviews and meta-analyses focused on HPV-associated oropharyngeal squamous cell cancers published from January 2005 through May 2011. Molecular and epidemiologic evidence suggest a strong etiologic association of HPV with oropharyngeal cancers. The incidence of oropharyngeal cancers in the United States has increased between 1973 and 2007, whereas that of cancers at other head and neck sites has decreased steadily. Compared with HPV-negative cancers, HPV-positive oropharyngeal cancers are associated with certain sexual behaviors, occur more often among white men and people who do not use tobacco or alcohol, and may occur in a population younger by about four years (median ages, 52-56 years). Despite often having a later stage of diagnosis, people with HPV-positive oropharyngeal cancers have a lower risk of dying or recurrence than do those with HPV-negative cancers. The effectiveness of the HPV vaccine in preventing oropharyngeal cancers is unknown. Dental health care personnel (DHCP) should be knowledgeable about the role of HPV in carcinogenesis, the association of HPV with oropharyngeal cancers and HPV vaccines, and they should be prompt in referring patients with suggestive symptoms for evaluation. DHCP can play an important role in increasing patients' knowledge about HPV

  14. Closure Report for Corrective Action Unit 261: Area 25 Test Cell A Leachfield System, Nevada Test Site, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    T. M. Fitzmaurice

    2001-04-01

    The purpose of this Closure Report (CR) is to provide documentation of the completed corrective action at the Test Cell A Leachfield System and to provide data confirming the corrective action. The Test Cell A Leachfield System is identified in the Federal Facility Agreement and Consent Order (FFACO) of 1996 as Corrective Action Unit (CAU) 261. Remediation of CAU 261 is required under the FFACO (1996). CAU 261 is located in Area 25 of the Nevada Test Site (NTS) which is approximately 140 kilometers (87 miles) northwest of Las Vegas, Nevada (Figure 1). CAU 261 consists of two Corrective Action Sites (CASS): CAS 25-05-01, Leachfield; and CAS 25-05-07, Acid Waste Leach Pit (AWLP) (Figures 2 and 3). Test Cell A was operated during the 1960s and 1970s to support the Nuclear Rocket Development Station. Various operations within Building 3124 at Test Cell A resulted in liquid waste releases to the Leachfield and the AWLP. The following existing site conditions were reported in the Corrective Action Decision Document (CADD) (U.S. Department of Energy, Nevada Operations Office [DOE/NV], 1999): Soil in the leachfield was found to exceed the Nevada Division of Environmental Protection (NDEP) Action Level for petroleum hydrocarbons, the U.S. Environmental Protection Agency (EPA) preliminary remediation goals for semi volatile organic compounds, and background concentrations for strontium-90; Soil below the sewer pipe and approximately 4.5 meters (m) (15 feet [ft]) downstream of the initial outfall was found to exceed background concentrations for cesium-137 and strontium-90; Sludge in the leachfield septic tank was found to exceed the NDEP Action Level for petroleum hydrocarbons and to contain americium-241, cesium-137, uranium-234, uranium-238, potassium-40, and strontium-90; No constituents of concern (COC) were identified at the AWLP. The NDEP-approved CADD (DOWNV, 1999) recommended Corrective Action Alternative 2, ''Closure of the Septic Tank and Distribution Box

  15. Life cycle comparison of fuel cell vehicles and internal combustion engine vehicles for Canada and the United States

    Science.gov (United States)

    Zamel, Nada; Li, Xianguo

    The objective of this study is to put forward a full analysis of the impact of the difference between the Canadian and American energy realities on the life cycle of fuel cell vehicles and internal combustion engine vehicles. Electricity is a major type of energy used in the transportation sector. Electricity is needed in the production of feedstock of fuel, the production of the fuel, the production of the vehicle material and the assembly of the vehicles. Therefore, it is necessary to investigate the impact of the electricity mix difference between Canada and the United States. In the analysis, the life cycle of the fuel consists of obtaining the raw material, extracting the fuel from the raw material, transporting and storing the fuel as well as using the fuel in the vehicle. Four different methods of obtaining hydrogen were analyzed; using coal and nuclear power to produce electricity and extract hydrogen through electrolysis and via steam reforming of natural gas in a natural gas plant and in a hydrogen refueling station. It is found that fuel cell vehicle fuelled by hydrogen has lower energy consumption and greenhouse gas emissions than internal combustion engine vehicle fuelled by conventional gasoline except for hydrogen production using coal as the primary energy source in Canada and the United States. Using the Canadian electricity mix will result in lower carbon dioxide emissions and energy consumption than using the American electricity mix. For the present vehicles, using the Canadian electricity mix will save up to 215.18 GJ of energy and 20.87 t of CO 2 on a per capita basis and 26.53 GJ of energy and 6.8 t of CO 2 on a per vehicle basis. Similarly, for the future vehicles, using the Canadian electricity mix will lower the total carbon dioxide emissions by 21.15 t and the energy consumed is reduced by 218.49 GJ on a per capita basis and 26.53 GJ of energy and 7.22 t of CO 2 on a per vehicle basis. The well-to-tank efficiencies are higher with the

  16. Single-unit-cell layer established Bi 2 WO 6 3D hierarchical architectures: Efficient adsorption, photocatalysis and dye-sensitized photoelectrochemical performance

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Hongwei; Cao, Ranran; Yu, Shixin; Xu, Kang; Hao, Weichang; Wang, Yonggang; Dong, Fan; Zhang, Tierui; Zhang, Yihe

    2017-12-01

    Single-layer catalysis sparks huge interests and gains widespread attention owing to its high activity. Simultaneously, three-dimensional (3D) hierarchical structure can afford large surface area and abundant reactive sites, contributing to high efficiency. Herein, we report an absorbing single-unit-cell layer established Bi2WO6 3D hierarchical architecture fabricated by a sodium dodecyl benzene sulfonate (SDBS)-assisted assembled strategy. The DBS- long chains can adsorb on the (Bi2O2)2+ layers and hence impede stacking of the layers, resulting in the single-unit-cell layer. We also uncovered that SDS with a shorter chain is less effective than SDBS. Due to the sufficient exposure of surface O atoms, single-unit-cell layer 3D Bi2WO6 shows strong selectivity for adsorption on multiform organic dyes with different charges. Remarkably, the single-unit-cell layer 3D Bi2WO6 casts profoundly enhanced photodegradation activity and especially a superior photocatalytic H2 evolution rate, which is 14-fold increase in contrast to the bulk Bi2WO6. Systematic photoelectrochemical characterizations disclose that the substantially elevated carrier density and charge separation efficiency take responsibility for the strengthened photocatalytic performance. Additionally, the possibility of single-unit-cell layer 3D Bi2WO6 as dye-sensitized solar cells (DSSC) has also been attempted and it was manifested to be a promising dye-sensitized photoanode for oxygen evolution reaction (ORR). Our work not only furnish an insight into designing single-layer assembled 3D hierarchical architecture, but also offer a multi-functional material for environmental and energy applications.

  17. The fourth dimension simply explained

    CERN Document Server

    Manning, Henry P

    2005-01-01

    To remove the contents of an egg without puncturing its shell or to drink the liquor in a bottle without removing the cork is clearly unthinkable - or is it? Understanding the world of Einstein and curved space requires a logical conception of the fourth dimension.This readable, informative volume provides an excellent introduction to that world, with 22 essays that employ a minimum of mathematics. Originally written for a contest sponsored by Scientific American, these essays are so well reasoned and lucidly written that they were judged to merit publication in book form. Their easily unders

  18. Dimensions of problem based learning

    DEFF Research Database (Denmark)

    Nielsen, Jørgen Lerche; Andreasen, Lars Birch

    2013-01-01

    The article contributes to the literature on problem based learning and problem-oriented project work, building on and reflecting the experiences of the authors through decades of work with problem-oriented project pedagogy. The article explores different dimensions of problem based learning such...... and Learning (MIL). We discuss changes in the roles of the teachers as supervisors within this learning environment, and we explore the involvement of students as active participants and co-designers of how course and project activities unfold....

  19. Keynote speech: Dimensions of Change

    DEFF Research Database (Denmark)

    Jørgensen, Kenneth Mølbjerg

    2004-01-01

    The presentation seeks to construct a framework for understanding knowledge and knowledge work. I argue that knowledge may be understood as a social construction of reality. I argue that people construct their reality by integrating four dimensions of reality: Facts, logic, values and communicati....... I argue that this framework leads to a new and critical understanding of the disciplines organizational learning and knowledge management. In particular I argue that these disciplines often contain their own image of work and identity, which may be a sharp contrast to extant work forms...

  20. ACCURACY DIMENSIONS IN REMOTE SENSING

    Directory of Open Access Journals (Sweden)

    Á. Barsi

    2018-04-01

    Full Text Available The technological developments in remote sensing (RS during the past decade has contributed to a significant increase in the size of data user community. For this reason data quality issues in remote sensing face a significant increase in importance, particularly in the era of Big Earth data. Dozens of available sensors, hundreds of sophisticated data processing techniques, countless software tools assist the processing of RS data and contributes to a major increase in applications and users. In the past decades, scientific and technological community of spatial data environment were focusing on the evaluation of data quality elements computed for point, line, area geometry of vector and raster data. Stakeholders of data production commonly use standardised parameters to characterise the quality of their datasets. Yet their efforts to estimate the quality did not reach the general end-user community running heterogeneous applications who assume that their spatial data is error-free and best fitted to the specification standards. The non-specialist, general user group has very limited knowledge how spatial data meets their needs. These parameters forming the external quality dimensions implies that the same data system can be of different quality to different users. The large collection of the observed information is uncertain in a level that can decry the reliability of the applications. Based on prior paper of the authors (in cooperation within the Remote Sensing Data Quality working group of ISPRS, which established a taxonomy on the dimensions of data quality in GIS and remote sensing domains, this paper is aiming at focusing on measures of uncertainty in remote sensing data lifecycle, focusing on land cover mapping issues. In the paper we try to introduce how quality of the various combination of data and procedures can be summarized and how services fit the users’ needs. The present paper gives the theoretic overview of the issue, besides

  1. Accuracy Dimensions in Remote Sensing

    Science.gov (United States)

    Barsi, Á.; Kugler, Zs.; László, I.; Szabó, Gy.; Abdulmutalib, H. M.

    2018-04-01

    The technological developments in remote sensing (RS) during the past decade has contributed to a significant increase in the size of data user community. For this reason data quality issues in remote sensing face a significant increase in importance, particularly in the era of Big Earth data. Dozens of available sensors, hundreds of sophisticated data processing techniques, countless software tools assist the processing of RS data and contributes to a major increase in applications and users. In the past decades, scientific and technological community of spatial data environment were focusing on the evaluation of data quality elements computed for point, line, area geometry of vector and raster data. Stakeholders of data production commonly use standardised parameters to characterise the quality of their datasets. Yet their efforts to estimate the quality did not reach the general end-user community running heterogeneous applications who assume that their spatial data is error-free and best fitted to the specification standards. The non-specialist, general user group has very limited knowledge how spatial data meets their needs. These parameters forming the external quality dimensions implies that the same data system can be of different quality to different users. The large collection of the observed information is uncertain in a level that can decry the reliability of the applications. Based on prior paper of the authors (in cooperation within the Remote Sensing Data Quality working group of ISPRS), which established a taxonomy on the dimensions of data quality in GIS and remote sensing domains, this paper is aiming at focusing on measures of uncertainty in remote sensing data lifecycle, focusing on land cover mapping issues. In the paper we try to introduce how quality of the various combination of data and procedures can be summarized and how services fit the users' needs. The present paper gives the theoretic overview of the issue, besides selected, practice

  2. Novel web-based real-time dashboard to optimize recycling and use of red cell units at a large multi-site transfusion service.

    Science.gov (United States)

    Sharpe, Christopher; Quinn, Jason G; Watson, Stephanie; Doiron, Donald; Crocker, Bryan; Cheng, Calvino

    2014-01-01

    Effective blood inventory management reduces outdates of blood products. Multiple strategies have been employed to reduce the rate of red blood cell (RBC) unit outdate. We designed an automated real-time web-based dashboard interfaced with our laboratory information system to effectively recycle red cell units. The objective of our approach is to decrease RBC outdate rates within our transfusion service. The dashboard was deployed in August 2011 and is accessed by a shortcut that was placed on the desktops of all blood transfusion services computers in the Capital District Health Authority region. It was designed to refresh automatically every 10 min. The dashboard provides all vital information on RBC units, and implemented a color coding scheme to indicate an RBC unit's proximity to expiration. The overall RBC unit outdate rate in the 7 months period following implementation of the dashboard (September 2011-March 2012) was 1.24% (123 units outdated/9763 units received), compared to similar periods in 2010-2011 and 2009-2010: 2.03% (188/9395) and 2.81% (261/9220), respectively. The odds ratio of a RBC unit outdate postdashboard (2011-2012) compared with 2010-2011 was 0.625 (95% confidence interval: 0.497-0.786; P dashboard system is an inexpensive and novel blood inventory management system which was associated with a significant reduction in RBC unit outdate rates at our institution over a period of 7 months. This system, or components of it, could be a useful addition to existing RBC management systems at other institutions.

  3. Dynamic microenvironments: the fourth dimension.

    Science.gov (United States)

    Tibbitt, Mark W; Anseth, Kristi S

    2012-11-14

    The extracellular space, or cell microenvironment, choreographs cell behavior through myriad controlled signals, and aberrant cues can result in dysfunction and disease. For functional studies of human cell biology or expansion and delivery of cells for therapeutic purposes, scientists must decipher this intricate map of microenvironment biology and develop ways to mimic these functions in vitro. In this Perspective, we describe technologies for four-dimensional (4D) biology: cell-laden matrices engineered to recapitulate tissue and organ function in 3D space and over time.

  4. Optimization of MNSR upper reflector material and dimensions

    International Nuclear Information System (INIS)

    Albarhoum, M.

    2007-04-01

    Calculations for the optimization of the material and dimensions of the Syrian MNSR was performed. Calculations showed that the considerably important reflectors in this case are Beryllium, Heavy water and Graphite. Dimensions of the reflector cannot any way exceed the Shim Tray dimensions. Two different ways of filling the Shim Tray with the reflector material were established: 1- the radial filling mode, and 2- the axial mode. Both modes can be performed using single sectors or cumulative ones. The axial mode proved to be better than the radial one. The axial cumulative mode proved to be more efficient than the single axial one. The axial cumulative mode was studied from two points of view; the neutronic and the economic ones. From the neutronic point of view the beryllium proved to be the best reflector, and the best dimensions were found to coincide with a thickness equal to 0.11235 cm with the bottom end being 0.4494 cm distant from the bottom of the Shim Tray. From the economic point of view it was found that the cost of the reactivity unit is the smallest when the Graphite is used. Results of this study can be applied directly to the Syrian MNSR since fabrication of any plastic containment for the reflector can easily be achieved. This is because the reactivity worth resulting from mass unit of the reflector varies depending on its position positions in the Shim Tray.(author)

  5. Massively Parallel Dimension Independent Adaptive Metropolis

    KAUST Repository

    Chen, Yuxin

    2015-01-01

    parameter dimension, by respecting the variance, for Gaussian targets. The result- ing algorithm, referred to as the dimension-independent adaptive Metropolis (DIAM) algorithm, also shows improved performance with respect to adaptive Metropolis on non

  6. Cosmology in theories with extra dimensions

    International Nuclear Information System (INIS)

    Kolb, E.W.

    1985-01-01

    Some possible cosmological effects of the existence of extra compact dimensions are discussed. Particular attention is given to the possibility that extra dimensions might naturally lead to an inflationary Universe scenario

  7. Packing in Two and Three Dimensions

    National Research Council Canada - National Science Library

    Martins, Gustavo H

    2003-01-01

    ...), the Multidimensional Knapsack Problem (MD-KP), and the Multidimensional Bin Packing Problem (MD-BPP). In these problems, there is a set of items, with rectangular dimensions, and a set of large containers, or bins, also with rectangular dimensions...

  8. Personality dimensions and disorders in pathological gambling

    DEFF Research Database (Denmark)

    Odlaug, Brian Lawrence; Schreiber, Liana R N; Grant, Jon E

    2013-01-01

    This review presents the most current research in personality dimensions and disorders with respect to pathological gambling.......This review presents the most current research in personality dimensions and disorders with respect to pathological gambling....

  9. Gravity theories in more than four dimensions

    International Nuclear Information System (INIS)

    Zumino, B.

    1985-03-01

    String theories suggest particular forms for gravity interactions in higher dimensions. We consider an interesting class of gravity theories in more than four dimensions, clarify their geometric meaning and discuss their special properties. 9 refs

  10. Effects of the Scientific Argumentation Based Learning Process on Teaching the Unit of Cell Division and Inheritance to Eighth Grade Students

    Science.gov (United States)

    Balci, Ceyda; Yenice, Nilgun

    2016-01-01

    The aim of this study is to analyse the effects of scientific argumentation based learning process on the eighth grade students' achievement in the unit of "cell division and inheritance". It also deals with the effects of this process on their comprehension about the nature of scientific knowledge, their willingness to take part in…

  11. Convergent synthesis of a tetrasaccharide repeating unit of the O-specific polysaccharide from the cell wall lipopolysaccharide of Azospirillum brasilense strain Sp7

    Directory of Open Access Journals (Sweden)

    Pintu Kumar Mandal

    2014-01-01

    Full Text Available A straightforward convergent synthesis has been carried out for the tetrasaccharide repeating unit of the O-specific cell wall lipopolysaccharide of the strain Sp7 of Azospirillum brasilense. The target tetrasaccharide has been synthesized from suitably protected monosaccharide intermediates in 42% overall yield in seven steps by using a [2 + 2] block glycosylation approach.

  12. Distinguishing dimensions of pro-environmental behaviour

    OpenAIRE

    Lynn, Peter

    2014-01-01

    This study empirically identifies dimensions of behaviour that are distinct in terms of the extent to which people act pro-environmentally. Three dimensions are identified, relating to at-home, transport-related and purchasing behaviour. The correlation between behaviour in each dimension is explored and the characteristics and attitudes associated with the extent to which behaviour is pro-environmental in each dimension are compared. The correlates of pro-environmental behaviour are found to...

  13. Corrective Action Plan for Corrective Action Unit 261: Area 25 Test Cell A Leachfield System, Nevada Test Site, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    T. M. Fitzmaurice

    2000-08-01

    This Corrective Action Plan (CAP) has been prepared for the Corrective Action Unit (CAU)261 Area 25 Test Cell A Leachfield System in accordance with the Federal Facility and Consent Order (Nevada Division of Environmental Protection [NDEP] et al., 1996). This CAP provides the methodology for implementing the approved corrective action alternative as listed in the Corrective Action Decision Document (U.S. Department of Energy, Nevada Operations Office, 1999). Investigation of CAU 261 was conducted from February through May of 1999. There were no Constituents of Concern (COCs) identified at Corrective Action Site (CAS) 25-05-07 Acid Waste Leach Pit (AWLP). COCs identified at CAS 25-05-01 included diesel-range organics and radionuclides. The following closure actions will be implemented under this plan: Because COCs were not found at CAS 25-05-07 AWLP, no action is required; Removal of septage from the septic tank (CAS 25-05-01), the distribution box and the septic tank will be filled with grout; Removal of impacted soils identified near the initial outfall area; and Upon completion of this closure activity and approval of the Closure Report by NDEP, administrative controls, use restrictions, and site postings will be used to prevent intrusive activities at the site.

  14. Extraordinary electromagnetic transmission by antenna arrays and frequency selective surfaces having compound unit cells with dissimilar elements

    Energy Technology Data Exchange (ETDEWEB)

    Loui, Hung; Strassner, II, Bernd H.

    2018-03-20

    The various embodiments presented herein relate to extraordinary electromagnetic transmission (EEMT) to enable multiple inefficient (un-matched) but coupled radiators and/or apertures to radiate and/or pass electromagnetic waves efficiently. EEMT can be utilized such that signal transmission from a plurality of antennas and/or apertures occurs at a transmission frequency different to transmission frequencies of the individual antennas and/or aperture elements. The plurality of antennas/apertures can comprise first antenna/aperture having a first radiating area and material(s) and second antenna/aperture having a second radiating area and material(s), whereby the first radiating/aperture area and second radiating/aperture area can be co-located in a periodic compound unit cell. Owing to mutual coupling between the respective antennas/apertures in their arrayed configuration, the transmission frequency of the array can be shifted from the transmission frequencies of the individual elements. EEMT can be utilized for an array of evanescent of inefficient radiators connected to a transmission line(s).

  15. Compact Design of 10 kW Proton Exchange Membrane Fuel Cell Stack Systems with Microcontroller Units

    Directory of Open Access Journals (Sweden)

    Hsiaokang Ma

    2014-04-01

    Full Text Available In this study, fuel, oxidant supply and cooling systems with microcontroller units (MCU are developed in a compact design to fit two 5 kW proton exchange membrane fuel cell (PEMFC stacks. At the initial stage, the testing facility of the system has a large volume (2.0 m × 2.0 m × 1.5 m with a longer pipeline and excessive control sensors for safe testing. After recognizing the performance and stability of stack, the system is redesigned to fit in a limited space (0.4 m × 0.5 m × 0.8 m. Furthermore, the stack performance is studied under different hydrogen recycling modes. Then, two similar 5 kW stacks are directly coupled with diodes to obtain a higher power output and safe operation. The result shows that the efficiency of the 5 kW stack is 43.46% with a purge period of 2 min with hydrogen recycling and that the hydrogen utilization rate µf is 66.31%. In addition, the maximum power output of the twin-coupled module (a power module with two stacks in electrical cascade/parallel arrangement is 9.52 kW.

  16. Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison.

    Science.gov (United States)

    Speirs, M; Van Hooreweder, B; Van Humbeeck, J; Kruth, J-P

    2017-06-01

    Selective laser melting (SLM) is an additive manufacturing technique able to produce complex functional parts via successively melting layers of metal powder. This process grants the freedom to design highly complex scaffold components to allow bone ingrowth and aid mechanical anchorage. This paper investigates the compression fatigue behaviour of three different unit cells (octahedron, cellular gyroid and sheet gyroid) of SLM nitinol scaffolds. It was found that triply periodic minimal surfaces display superior static mechanical properties in comparison to conventional octahedron beam lattice structures at identical volume fractions. Fatigue resistance was also found to be highly geometry dependent due to the effects of AM processing techniques on the surface topography and notch sensitivity. Geometries minimising nodal points and the staircase effect displayed the greatest fatigue resistance when normalized to yield strength. Furthermore oxygen analysis showed a large oxygen uptake during SLM processing which must be altered to meet ASTM medical grade standards and may significantly reduce fatigue life. These achieved fatigue properties indicate that NiTi scaffolds produced via SLM can provide sufficient mechanical support over an implants lifetime within stress range values experienced in real life. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Corrective Action Plan for Corrective Action Unit 261: Area 25 Test Cell A Leachfield System, Nevada Test Site, Nevada; TOPICAL

    International Nuclear Information System (INIS)

    T. M. Fitzmaurice

    2000-01-01

    This Corrective Action Plan (CAP) has been prepared for the Corrective Action Unit (CAU)261 Area 25 Test Cell A Leachfield System in accordance with the Federal Facility and Consent Order (Nevada Division of Environmental Protection[NDEP] et al., 1996). This CAP provides the methodology for implementing the approved corrective action alternative as listed in the Corrective Action Decision Document (U.S. Department of Energy, Nevada Operations Office, 1999). Investigation of CAU 261 was conducted from February through May of 1999. There were no Constituents of Concern (COCs) identified at Corrective Action Site (CAS) 25-05-07 Acid Waste Leach Pit (AWLP). COCs identified at CAS 25-05-01 included diesel-range organics and radionuclides. The following closure actions will be implemented under this plan: Because COCs were not found at CAS 25-05-07 AWLP, no action is required; Removal of septage from the septic tank (CAS 25-05-01), the distribution box and the septic tank will be filled with grout; Removal of impacted soils identified near the initial outfall area; and Upon completion of this closure activity and approval of the Closure Report by NDEP, administrative controls, use restrictions, and site postings will be used to prevent intrusive activities at the site

  18. Invasive fungal infection among hematopoietic stem cell transplantation patients with mechanical ventilation in the intensive care unit

    Directory of Open Access Journals (Sweden)

    Hung Chen-Yiu

    2012-02-01

    Full Text Available Abstract Background Invasive fungal infection (IFI is associated with high morbidity and high mortality in hematopoietic stem cell transplantation (HSCT patientsThe purpose of this study was to assess the characteristics and outcomes of HSCT patients with IFIs who are undergoing MV at a single institution in Taiwan. Methods We performed an observational retrospective analysis of IFIs in HSCT patients undergoing mechanical ventilation (MV in an intensive care unit (ICU from the year 2000 to 2009. The characteristics of these HSCT patients and risk factors related to IFIs were evaluated. The status of discharge, length of ICU stay, date of death and cause of death were also recorded. Results There were 326 HSCT patients at the Linkou Chang-Gung Memorial Hospital (Taipei, Taiwan during the study period. Sixty of these patients (18% were transferred to the ICU and placed on mechanical ventilators. A total of 20 of these 60 patients (33% had IFIs. Multivariate analysis indicated that independent risk factors for IFI were admission to an ICU more than 40 days after HSCT, graft versus host disease (GVHD, and high dose corticosteroid (p p = 0.676. Conclusion There was a high incidence of IFIs in HSCT patients requiring MV in the ICU in our study cohort. The independent risk factors for IFI are ICU admission more than 40 days after HSCT, GVHD, and use of high-dose corticosteroid.

  19. Topological dimension and dynamical systems

    CERN Document Server

    Coornaert, Michel

    2015-01-01

    Translated from the popular French edition, the goal of the book is to provide a self-contained introduction to mean topological dimension, an invariant of dynamical systems introduced in 1999 by Misha Gromov. The book examines how this invariant was successfully used by Elon Lindenstrauss and Benjamin Weiss to answer a long-standing open question about embeddings of minimal dynamical systems into shifts. A large number of revisions and additions have been made to the original text. Chapter 5 contains an entirely new section devoted to the Sorgenfrey line. Two chapters have also been added: Chapter 9 on amenable groups and Chapter 10 on mean topological dimension for continuous actions of countable amenable groups. These new chapters contain material that have never before appeared in textbook form. The chapter on amenable groups is based on Følner’s characterization of amenability and may be read independently from the rest of the book. Although the contents of this book lead directly to several active ar...

  20. Farm business and operator variables associated with bulk tank somatic cell count from dairy herds in the southeastern United States.

    Science.gov (United States)

    DeLong, Karen L; Lambert, Dayton M; Schexnayder, Susan; Krawczel, Peter; Fly, Mark; Garkovich, Lorraine; Oliver, Steve

    2017-11-01

    Mastitis is a worldwide problem in dairy cows and results in reduced milk production, the culling of cows, and other economic losses. Bulk tank somatic cell count (BTSCC) over 200,000 cells/mL often indicates underlying subclinical mastitis in dairy herds. Several preventative measures that can be implemented to help improve the incidence of mastitis exist, but surveys find these practices not fully adopted by producers. The goal of this research was to analyze the farm and operator characteristics associated with BTSCC in dairy herds by analyzing a survey of dairy producers in the southeastern United States. We examined this region because it has experienced a decline in the number of dairy farms, dairy cows, and milk production over the past 2 decades. The southeast region is also associated with higher BTSCC levels than the national average. Dairy farms in Georgia, Mississippi, Kentucky, North Carolina, South Carolina, Tennessee, and Virginia were surveyed. Producers were asked questions about the BTSCC at which they take action to address BTSCC, the information sources they use to learn about and manage BTSCC, farm structure and management characteristics, and attitudinal variables associated with profitability, managerial control, and planning horizon. Least squares regression was used to determine how these factors were associated with BTSCC levels across the 7-state region. Concern over mastitis, financial consequences of mastitis, and increased previous-year BTSCC were associated with higher current BTSCC levels. Obtaining information about mastitis from veterinarians and extension personnel, taking action against mastitis at a BTSCC less than 300,000 cells/mL, and perceived ability to control processes and mastitis incidence were associated with reduced BTSCC. We found average BTSCC was lower in North Carolina and Virginia. These results suggest that proactive producers (i.e., those that perceive they can control BTSCC and seek information from reliable

  1. New universality class in three dimensions

    DEFF Research Database (Denmark)

    Codello, A.; Safari, M.; Vacca, G. P.

    2017-01-01

    We study the Blume-Capel universality class in d=103-ϵ dimensions. The renormalization group flow is extracted by looking at poles in fractional dimension of three loop diagrams using MS. The theory is the only nontrivial universality class which admits an expansion to three dimensions with ϵ=13<...

  2. Divergence, spacetime dimension and fractal structure

    International Nuclear Information System (INIS)

    Nakamura, Hiroshi

    2000-01-01

    With a Cantor spacetime in mind, we assume the dimension of spacetime to be slightly smaller than four. Within the framework of QED, this dimension can be determined by calculating Feynman diagrams. We infer that the dimension of spacetime may be influenced by holes in space. (author)

  3. Research of the impact of coupling between unit cells on performance of linear-to-circular polarization conversion metamaterial with half transmission and half reflection

    Science.gov (United States)

    Guo, Mengchao; Zhou, Kan; Wang, Xiaokun; Zhuang, Haiyan; Tang, Dongming; Zhang, Baoshan; Yang, Yi

    2018-04-01

    In this paper, the impact of coupling between unit cells on the performance of linear-to-circular polarization conversion metamaterial with half transmission and half reflection is analyzed by changing the distance between the unit cells. An equivalent electrical circuit model is then built to explain it based on the analysis. The simulated results show that, when the distance between the unit cells is 23 mm, this metamaterial converts half of the incident linearly-polarized wave into reflected left-hand circularly-polarized wave and converts the other half of it into transmitted left-hand circularly-polarized wave at 4.4 GHz; when the distance is 28 mm, this metamaterial reflects all of the incident linearly-polarized wave at 4.4 GHz; and when the distance is 32 mm, this metamaterial converts half of the incident linearly-polarized wave into reflected right-hand circularly-polarized wave and converts the other half of it into transmitted right-hand circularly-polarized wave at 4.4 GHz. The tunability is realized successfully. The analysis shows that the changes of coupling between unit cells lead to the changes of performance of this metamaterial. The coupling between the unit cells is then considered when building the equivalent electrical circuit model. The built equivalent electrical circuit model can be used to perfectly explain the simulated results, which confirms the validity of it. It can also give help to the design of tunable polarization conversion metamaterials.

  4. Silicon Nanowire/Polymer Hybrid Solar Cell-Supercapacitor: A Self-Charging Power Unit with a Total Efficiency of 10.5.

    Science.gov (United States)

    Liu, Ruiyuan; Wang, Jie; Sun, Teng; Wang, Mingjun; Wu, Changsheng; Zou, Haiyang; Song, Tao; Zhang, Xiaohong; Lee, Shuit-Tong; Wang, Zhong Lin; Sun, Baoquan

    2017-07-12

    An integrated self-charging power unit, combining a hybrid silicon nanowire/polymer heterojunction solar cell with a polypyrrole-based supercapacitor, has been demonstrated to simultaneously harvest solar energy and store it. By efficiency enhancement of the hybrid nanowire solar cells and a dual-functional titanium film serving as conjunct electrode of the solar cell and supercapacitor, the integrated system is able to yield a total photoelectric conversion to storage efficiency of 10.5%, which is the record value in all the integrated solar energy conversion and storage system. This system may not only serve as a buffer that diminishes the solar power fluctuations from light intensity, but also pave its way toward cost-effective high efficiency self-charging power unit. Finally, an integrated device based on ultrathin Si substrate is demonstrated to expand its feasibility and potential application in flexible energy conversion and storage devices.

  5. Quantum Physics in One Dimension

    International Nuclear Information System (INIS)

    Logan, David

    2004-01-01

    To a casual ostrich the world of quantum physics in one dimension may sound a little one-dimensional, suitable perhaps for those with an unhealthy obsession for the esoteric. Nothing of course could be further from the truth. The field is remarkably rich and broad, and for more than fifty years has thrown up innumerable challenges. Theorists, realising that the role of interactions in 1D is special and that well known paradigms of higher dimensions (Fermi liquid theory for example) no longer apply, took up the challenge of developing new concepts and techniques to understand the undoubted peculiarities of one-dimensional systems. And experimentalists have succeeded in turning pipe dreams into reality, producing an impressive and ever increasing array of experimental realizations of 1D systems, from the molecular to the mesoscopic - spin and ladder compounds, organic superconductors, carbon nanotubes, quantum wires, Josephson junction arrays and so on. Many books on the theory of one-dimensional systems are however written by experts for experts, and tend as such to leave the non-specialist a touch bewildered. This is understandable on both fronts, for the underlying theoretical techniques are unquestionably sophisticated and not usually part of standard courses in many-body theory. A brave author it is then who aims to produce a well rounded, if necessarily partial, overview of quantum physics in one dimension, accessible to a beginner yet taking them to the edge of current research, and providing en route a thorough grounding in the fundamental ideas, basic methods and essential phenomenology of the field. It is of course the brave who succeed in this world, and Thierry Giamarchi does just that with this excellent book, written by an expert for the uninitiated. Aimed in particular at graduate students in theoretical condensed matter physics, and assuming little theoretical background on the part of the reader (well just a little), Giamarchi writes in a

  6. Novel web-based real-time dashboard to optimize recycling and use of red cell units at a large multi-site transfusion service

    Directory of Open Access Journals (Sweden)

    Christopher Sharpe

    2014-01-01

    Full Text Available Background: Effective blood inventory management reduces outdates of blood products. Multiple strategies have been employed to reduce the rate of red blood cell (RBC unit outdate. We designed an automated real-time web-based dashboard interfaced with our laboratory information system to effectively recycle red cell units. The objective of our approach is to decrease RBC outdate rates within our transfusion service. Methods: The dashboard was deployed in August 2011 and is accessed by a shortcut that was placed on the desktops of all blood transfusion services computers in the Capital District Health Authority region. It was designed to refresh automatically every 10 min. The dashboard provides all vital information on RBC units, and implemented a color coding scheme to indicate an RBC unit′s proximity to expiration. Results: The overall RBC unit outdate rate in the 7 months period following implementation of the dashboard (September 2011-March 2012 was 1.24% (123 units outdated/9763 units received, compared to similar periods in 2010-2011 and 2009-2010: 2.03% (188/9395 and 2.81% (261/9220, respectively. The odds ratio of a RBC unit outdate postdashboard (2011-2012 compared with 2010-2011 was 0.625 (95% confidence interval: 0.497-0.786; P < 0.0001. Conclusion: Our dashboard system is an inexpensive and novel blood inventory management system which was associated with a significant reduction in RBC unit outdate rates at our institution over a period of 7 months. This system, or components of it, could be a useful addition to existing RBC management systems at other institutions.

  7. Human dimension of strategic partnerships

    Directory of Open Access Journals (Sweden)

    Petković Mirjana M.

    2004-01-01

    Full Text Available This paper aims to point to the widespread practice of neglecting behavioral aspects of different forms of fusions and integrations of enterprises that have emerged in the process of privatization through strategic partnerships with foreign companies among Serbian enterprises. The initial hypothesis in this paper is that the process of privatization, restructuring and transformation in Serbian enterprises cannot be completely successful and equally advantageous for all the subjects involved if there is no concern for human dimension of these processes. Without this concern there is a possibility for behavioral problems to arise, and the only way to resolve them is through post festum respecting and introducing elements that should never have been neglected in the first place. This paper refers to the phenomenon of collision of cultures and the ways of resolving it while forming strategic partnerships.

  8. Psychological dimensions of Energy Conservation

    Directory of Open Access Journals (Sweden)

    Tonello, Graciela

    2012-12-01

    Full Text Available One of the most serious current environmental problems is the depletion of non renewable natural resources. The vast majority of our daily actions involve the consumption of energy and they increase the problem. Environmental psychology studies the psychological motivations that determine pro-ecological behaviour. In this context the aim of this review was to determine which psychological models and variables are better descriptors of residential energy conservation, comparing the predictive power of different models related to behaviour, residential consumption as well as to the acceptability of energy policies. Results suggest that energy saving is mainly linked to altruistic motivations, followed by egoistic reasons and in a minor way to environmental concerns. People would act according to these dimensions when contextual conditions are perceived as appropriate.

  9. Gravitational lensing and extra dimensions

    International Nuclear Information System (INIS)

    He, X-G.; University of Melbourne, Parkville, VIC; Joshi, G.C.; McKellar, B.H.J.

    1999-08-01

    We study gravitational tensing and the bending of light in low energy scale (M s ) gravity theories with extra space-time dimensions 'n'. We find that due to the presence of spin-2 Kaluza-Klein states from compactification, a correction to the deflection angle with a strong quadratic dependence on the photon energy is introduced. No deviation from the Einstein General Relativity prediction for the deflection angle for photons grazing the Sun in the visible band with 15% accuracy (90% c.l.) implies that the scale M s has to be larger than 1.4(2/(n-2)) 1/4 TeV and approximately 4 TeV for n=2. This lower bound is comparable with that from collider physics constraints. Gravitational tensing experiments with higher energy photons can provide stronger constraints. (authors)

  10. Ultraviolet sensitivity in higher dimensions

    International Nuclear Information System (INIS)

    Hoover, Doug; Burgess, Clifford P.

    2006-01-01

    We calculate the first three Gilkey-DeWitt (heat-kernel) coefficients, a 0 , a 1 and a 2 , for massive particles having the spins of most physical interest in n dimensions, including the contributions of the ghosts and the fields associated with the appropriate generalized Higgs mechanism. By assembling these into supermultiplets we compute the same coefficients for general supergravity theories, and show that they vanish for many examples. One of the steps of the calculation involves computing these coefficients for massless particles, and our expressions in this case agree with - and extend to more general background spacetimes - earlier calculations, where these exist. Our results give that part of the low-energy effective action which depends most sensitively on the mass of heavy fields once these are integrated out. These results are used in hep-th/0504004 to compute the sensitivity to large masses of the Casimir energy in Ricci-flat 4D compactifications of 6D supergravity

  11. ORGANIZATIONAL CULTURE DIMENSIONS AND VARIABLES

    Directory of Open Access Journals (Sweden)

    Brindusa Maria Popa

    2017-11-01

    Full Text Available There are numerous definitions of the concept in the specialized literature and the majority present organizational culture as a system of values, norms, rules, beliefs, habits learned and internalized by the organization members and embodied in their behaviors. Such definitions highlight the fact that organizational culture is a system of values, norms, customs and beliefs shared and assimilated by the entire membership of the organization in order to transform them into inherent characteristics of their behavior. The newly acquired behavior will be promoted, defended and developed throughout their work. Even if organizational culture is built upon such a strict, rigid, formal institutional support, it evolves and develops in order to help the organization adapt and perform efficiently. In order to have an easier understanding of the concept, in this paper we shall use for our analysis the following dimensions: cognitive, normative, human and material.

  12. Accessible solitons of fractional dimension

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, Wei-Ping, E-mail: zhongwp6@126.com [Department of Electronic and Information Engineering, Shunde Polytechnic, Guangdong Province, Shunde 528300 (China); Texas A& M University at Qatar, P.O. Box 23874, Doha (Qatar); Belić, Milivoj [Texas A& M University at Qatar, P.O. Box 23874, Doha (Qatar); Zhang, Yiqi [Key Laboratory for Physical Electronics and Devices of the Ministry of Education & Shaanxi Key Lab of Information Photonic Technique, Xi’an Jiaotong University, Xi’an 710049 (China)

    2016-05-15

    We demonstrate that accessible solitons described by an extended Schrödinger equation with the Laplacian of fractional dimension can exist in strongly nonlocal nonlinear media. The soliton solutions of the model are constructed by two special functions, the associated Legendre polynomials and the Laguerre polynomials in the fraction-dimensional space. Our results show that these fractional accessible solitons form a soliton family which includes crescent solitons, and asymmetric single-layer and multi-layer necklace solitons. -- Highlights: •Analytic solutions of a fractional Schrödinger equation are obtained. •The solutions are produced by means of self-similar method applied to the fractional Schrödinger equation with parabolic potential. •The fractional accessible solitons form crescent, asymmetric single-layer and multilayer necklace profiles. •The model applies to the propagation of optical pulses in strongly nonlocal nonlinear media.

  13. VC-dimension of univariate decision trees.

    Science.gov (United States)

    Yildiz, Olcay Taner

    2015-02-01

    In this paper, we give and prove the lower bounds of the Vapnik-Chervonenkis (VC)-dimension of the univariate decision tree hypothesis class. The VC-dimension of the univariate decision tree depends on the VC-dimension values of its subtrees and the number of inputs. Via a search algorithm that calculates the VC-dimension of univariate decision trees exhaustively, we show that our VC-dimension bounds are tight for simple trees. To verify that the VC-dimension bounds are useful, we also use them to get VC-generalization bounds for complexity control using structural risk minimization in decision trees, i.e., pruning. Our simulation results show that structural risk minimization pruning using the VC-dimension bounds finds trees that are more accurate as those pruned using cross validation.

  14. Ammonia concentration and bacterial evaluation of feline whole blood and packed red blood cell units stored for transfusion

    Directory of Open Access Journals (Sweden)

    Eva Spada

    2014-10-01

    Full Text Available Ammonia concentrations increase in human, canine and equine WB and PRBC units during storage. The aim of this study was to determine the effect of storage on ammonia concentration in feline WB and PRBC units stored in a veterinary blood bank and to evaluate possible correlations with bacterial contamination. Ammonia concentration was evaluated in 15 WB units and 2 PRBC units on day 1 and at the end of storage after 35 and 42 days, respectively. In an additional 5 WB units and 4 PRBC units ammonia concentrations were determined daily until the day the normal reference range was exceeded and then weekly to the end of storage. All units were evaluated for bacterial contamination. Ammonia increased markedly during storage as a linear function over time. On the 35th and 42th day of storage at 4±2°C mean±SD ammonia concentration reached 909±158 µg/dl and 1058±212 µg/dl in WB and PRBC units, respectively. Bacterial culture was negative in all units. High ammonia concentrations in stored WB and PRBC units could result in toxicity, particularly in feline recipients with liver failure, portosystemic shunts or those receiving large transfusion volumes. Clinical in vivo studies evaluating the effects on recipients should be performed.

  15. Endogenous chloride channels of insect sf9 cells. Evidence for coordinated activity of small elementary channel units

    DEFF Research Database (Denmark)

    Larsen, Erik Hviid; Gabriel, S. E.; Stutts, M. J.

    1996-01-01

    The endogenous Cl- conductance of Spodoptera frugiperda (Sf9) cells was studied 20-35 h after plating out of either uninfected cells or cells infected by a baculovirus vector carrying the cloned beta-galactosidase gene (beta-Gal cells). With the cation Tris+ in the pipette and Na+ in the bath...

  16. Hematopoietic Stem Cell Transplantation Activity in Pediatric Cancer between 2008 and 2014 in the United States: A Center for International Blood and Marrow Transplant Research Report.

    Science.gov (United States)

    Khandelwal, Pooja; Millard, Heather R; Thiel, Elizabeth; Abdel-Azim, Hisham; Abraham, Allistair A; Auletta, Jeffery J; Boulad, Farid; Brown, Valerie I; Camitta, Bruce M; Chan, Ka Wah; Chaudhury, Sonali; Cowan, Morton J; Angel-Diaz, Miguel; Gadalla, Shahinaz M; Gale, Robert Peter; Hale, Gregory; Kasow, Kimberly A; Keating, Amy K; Kitko, Carrie L; MacMillan, Margaret L; Olsson, Richard F; Page, Kristin M; Seber, Adriana; Smith, Angela R; Warwick, Anne B; Wirk, Baldeep; Mehta, Parinda A

    2017-08-01

    This Center for International Blood and Marrow Transplant Research report describes the use of hematopoietic stem cell transplantation (HSCT) in pediatric patients with cancer, 4408 undergoing allogeneic (allo) and3076 undergoing autologous (auto) HSCT in the United States between 2008 and 2014. In both settings, there was a greater proportion of boys (n = 4327; 57%), children reports of transplant practices in the United States. Copyright © 2017 The American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

  17. Identified metabolic signature for assessing red blood cell unit quality is associated with endothelial damage markers and clinical outcomes

    DEFF Research Database (Denmark)

    Bordbar, Aarash; Johansson, Pär I.; Paglia, Giuseppe

    2016-01-01

    shown no difference of clinical outcome for patients receiving old or fresh RBCs. An overlooked but essential issue in assessing RBC unit quality and ultimately designing the necessary clinical trials is a metric for what constitutes an old or fresh RBC unit. STUDY DESIGN AND METHODS: Twenty RBC units...... years and endothelial damage markers in healthy volunteers undergoing autologous transfusions. CONCLUSION: The state of RBC metabolism may be a better indicator of cellular quality than traditional hematologic variables....

  18. The Application of Load-cell Technique in the Study of Armour Unit Responses to Impact Loads

    OpenAIRE

    Burcharth, H. F.; Liu, Zhou

    1994-01-01

    The slender, complex types of armour units, such as Tetrapods and Dolosse arewidely used for rubble mound breakwaters. Many of the recent failures of such structures were caused by unforeseen early breakage of the units, thus revealing an inbalance between the strength (structural integrity) of the units and the hydraulic stability (resistance to displacements) of the armour layers. Breakage is caused by stresses from static, pulsating and impact loads. Impact load generated stresses are diff...

  19. The Application of Load-cell Technique in the Study of Armour Unit Responses to Impact Loads Tests

    OpenAIRE

    Burcharth, H. F.; Liu, Z.

    1995-01-01

    The slender, complex types of armour units, such as Tetrapods and Dolosse arewidely used for rubble mound breakwaters. Many of the recent failures of suchstructures were caused by unforeseen early breakage of the units, thus revealingan in balance between the strength (structural integrity) of the units and thehydraulic stability (resistance to displacements) of the armour layers. Breakageis caused by stresses from static, pulsating and impact loads. Impact load generated stresses are difficu...

  20. The external dimension of the Spanish transition

    Directory of Open Access Journals (Sweden)

    Charles T. Powell

    1993-07-01

    Full Text Available The author intends to go beyond the unanimous opinion that the processes of political transition must be explained, almost exclusively, in terms of national forces and calculations. In the case of the Spanish transition he intends to demonstrate how thestrategies of the national actors (crown, government and parties were moulded largely by the pressure of regulations and structures drawn up outside its frontiers. Firstly, by the United States’ discreet support (always putting forward first her strategic interests of the political evolution whilst it did not put in danger the Spanish contribution to the western defensive system (while the USSR hardly played any role. The Spanish transition did not offer a threat to the alliance system from the beginning and with which the result was practically guaranteed. The European governments for their part, worried least about security and more about the political dimension pressurizing the regime and supporting the leaders of the democratic opposition more and more. The European institutions, withtheir veto, ended up legitimizing the Spanish process of democratization while the different Internationals came together and helped their coreligionists in Spain. Their political and diplomatic pressure were complemented, with the paradigm in the case of PSOE, with the contribution of means and resources by the political foundations, largely German, whose highly visible participation did not lessen the credibiity of those it protected.

  1. The Application of Load-cell Technique in the Study of Armour Unit Responses to Impact Loads

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Liu, Zhou

    1994-01-01

    The slender, complex types of armour units, such as Tetrapods and Dolosse are widely used for rubble mound breakwaters. Many of the recent failures of such structures were caused by unforeseen early breakage of the units, thus revealing an inbalance between the strength (structural integrity) of ...

  2. Moving into the third dimension

    CERN Multimedia

    Alizée Dauvergne

    2010-01-01

    One detail at a time, digital 3-D models of CERN’s various machines are being created by the Integration Section in the Machines & Experimental Facilities Group (EN/MEF) . The work, which requires painstaking attention to detail on a colossal scale, facilitates improvements to existing accelerators and the design of new machines in the future.   Virtual representation of the LHC A complete digital mockup of the LHC in three dimensions already exists, including of course the tunnel, the machine systems including magnets and vacuum chambers, but also all of the various services such as cable ladders, piping systems and access control and so on. Only the colour and the texture of the surfaces betray that it is a mockup and not the real thing! The mockup of LINAC4 is finished too. The mockups for the SPS, ISOLDE and the entire PS complex, including transfer lines, are still being created. “Creating these 3-D mockups will allow us to work on forthcoming machine improvements, esp...

  3. Higgs bosons in extra dimensions

    Science.gov (United States)

    Quiros, Mariano

    2015-05-01

    In this paper, motivated by the recent discovery of a Higgs-like boson at the Large Hadron Collider (LHC) with a mass mH≃125 GeV, we review different models where the hierarchy problem is solved by means of a warped extra dimension. In the Randall-Sundrum (RS) model electroweak observables provide very strong bounds on the mass of KK modes which motivates extensions to overcome this problem. Two extensions are briefly discussed. One particular extension is based on the deformation of the metric such that it strongly departs from the AdS5 structure in the IR region while it goes asymptotically to AdS5 in the UV brane. This model has the IR brane close to a naked metric singularity (which is outside the physical interval) characteristic of soft-walls constructions. The proximity of the singularity provides a strong wave function renormalization for the Higgs field which suppresses the T and S parameters. The second class of considered extensions are based on the introduction of an extra gauge group in the bulk such that the custodial SU(2)R symmetry is gauged and protects the T parameter. By further enlarging the bulk gauge symmetry one can find models where the Higgs is identified with the fifth component of gauge fields and for which the Higgs potential along with the Higgs mass can be dynamically determined by the Coleman-Weinberg mechanism.

  4. DIMENSIONS OF THE MARKET RISK

    Directory of Open Access Journals (Sweden)

    Cornelia Marcela Danu

    2014-07-01

    Full Text Available The present work presents the concept approach and the types of the market risks, considering the representatives of the two correlative dimensions of the market: the supply and the demand. This approach dissociates from the other ways to define and to manage the market risks by the message that it communicates: all the types of risk caused by the market activities are market risks. These are anthropic risks, based on information and decision. From the point of view of source, the market risks or the decisional risks have the actions of the deciders (natural person or legal person to achieving the personal goals or mission or the objectives of the firm which they represent. The market risks are those which pose a threat to the attainment of the major objectives or purposes and to maximizing of advantages: the utility for the consumer and profit for the enterprise. The results of the dynamic interdependences are determined by the optimal management of each type of risk, taking into account the system of risks and the potential for transformation of the risk-cause in risk-effect and vice versa.

  5. Isolation and characterization of the environmental bacterial and fungi contamination in a pharmaceutical unit of mesenchymal stem cell for clinical use.

    Science.gov (United States)

    Martín, Patricia Gálvez; González, María Bermejo; Martínez, Adolfina Ruiz; Lara, Visitación Gallardo; Naveros, Beatriz Clares

    2012-09-01

    Design and implementation of an environmental monitoring program is vital to assure the maintenance of acceptable quality conditions in a pharmaceutical manufacturing unit of human mesenchymal stem cells. Since sterility testing methods require 14 days and these cells are only viable for several hours, they are currently administered without the result of this test. Consequently environmental monitoring is a key element in stem cell banks for assuring low levels of potential introduction of contaminants into the cell products. The aim of this study was to qualitatively and quantitatively analyze the environmental microbiological quality in a pharmaceutical manufacturing unit of human mesenchymal stem cells production for use in advanced therapies. Two hundred and sixty one points were tested monthly during one year, 156 from air and 105 from surfaces. Among the 6264 samples tested, 231 showed contamination, 76.6% for bacteria and 23.4% for fungi. Microbial genuses isolated were Staphylococcus (89.7%), Microccocus (4.5%), Kocuria (3.2%) and Bacillus (2.6%). In the identification of fungi, three genuses were detected: Aspergillus (56%), Penicillium (26%) and Cladosporium (18%). The origin of the contamination was found to be due to personnel manipulation and air microbiota. For all sampling methods, alert limits were set and corrective measures suggested. Copyright © 2012 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

  6. Spectral dimension in causal set quantum gravity

    International Nuclear Information System (INIS)

    Eichhorn, Astrid; Mizera, Sebastian

    2014-01-01

    We evaluate the spectral dimension in causal set quantum gravity by simulating random walks on causal sets. In contrast to other approaches to quantum gravity, we find an increasing spectral dimension at small scales. This observation can be connected to the nonlocality of causal set theory that is deeply rooted in its fundamentally Lorentzian nature. Based on its large-scale behaviour, we conjecture that the spectral dimension can serve as a tool to distinguish causal sets that approximate manifolds from those that do not. As a new tool to probe quantum spacetime in different quantum gravity approaches, we introduce a novel dimensional estimator, the causal spectral dimension, based on the meeting probability of two random walkers, which respect the causal structure of the quantum spacetime. We discuss a causal-set example, where the spectral dimension and the causal spectral dimension differ, due to the existence of a preferred foliation. (paper)

  7. CREDIBILITY OF WEBSITES THROUGH FACETS AND DIMENSIONS

    Directory of Open Access Journals (Sweden)

    Oana ȚUGULEA

    2017-05-01

    Full Text Available This study aims to investigate important aspects to concern on when building a commercial presentation website, in order to increase the credibility of the certain categories of a presentation website. Factor analysis was used in order to identify the dimensions of each category. The categories and resulted dimensions discussed were: “image” – with the following dimensions: Projected image, Specialist, Advert and Coherence, “relationship” – with the following dimensions: Bi-directional communication and Contact information, “product presentation” – with the following dimensions: In-depth description and Variety and “site functionality” – with the following dimensions: Usefulness, Official relationship, Complete communication, Exterior communication, Information format and References.

  8. Space: The Hunt for Hidden Dimensions

    International Nuclear Information System (INIS)

    Hewett, JoAnne

    2006-01-01

    Extra dimensions of space may be present in our universe. Their discovery would dramatically change our view of the cosmos and would prompt many questions. How do they hide? What is their shape? How many are there? How big are they? Do particles and forces feel their presence? This lecture will explain the concept of dimensions and show that current theoretical models predict the existence of extra spatial dimensions which could be in the discovery reach of present and near-term experiments. The manner by which these additional dimensions reveal their existence will be described. Searches for modifications of the gravitational force, astrophysical effects, and collider signatures already constrain the size of extra dimensions and will be summarized. Once new dimensions are discovered, the technology by which the above questions can be answered will be discussed.

  9. Heat and Mass Transfer during Hydrogen Generation in an Array of Fuel Bars of a BWR Using a Periodic Unit Cell

    Directory of Open Access Journals (Sweden)

    H. Romero-Paredes

    2012-01-01

    Full Text Available This paper presents, the numerical analysis of heat and mass transfer during hydrogen generation in an array of fuel cylinder bars, each coated with a cladding and a steam current flowing outside the cylinders. The analysis considers the fuel element without mitigation effects. The system consists of a representative periodic unit cell where the initial and boundary-value problems for heat and mass transfer were solved. In this unit cell, we considered that a fuel element is coated by a cladding with steam surrounding it as a coolant. The numerical simulations allow describing the evolution of the temperature and concentration profiles inside the nuclear reactor and could be used as a basis for hybrid upscaling simulations.

  10. As dimensões do cuidado em uma unidade de queimados: um estudo etnográfico Las dimensiones del cuidado en una unidad de quemados: un estudio etnográfico The dimensions of the care in a burn unit: an ethnographic study

    Directory of Open Access Journals (Sweden)

    Elaine Carvalho Fernandes Braga Costa

    2003-09-01

    Full Text Available Este estudo etnográfico teve como objetivo compreender as perspectivas culturais dos profissionais de enfermagem que atuam em uma Unidade de Queimados sobre cuidado do paciente vítima de queimaduras. Os dados foram coletados por meio de observação e entrevistas e interpretados de acordo com a perspectiva de Bourdieu, que utiliza os conceitos de habitus e campo para compreender os comportamentos que expressam o que está interiorizado pelas pessoas que fazem parte de um grupo social. Para desempenhar o cuidado, os profissionais agem de acordo com formas que já interiorizaram, como sofrer junto, ser firme e, ao mesmo tempo, atencioso e carinhoso.Este estudio etnográfico tuvo como objetivo comprender las perspectivas culturales de profesionales de enfermería, que actúan en una Unidad de Quemados, sobre el cuidado del cliente que sufrió quemaduras. Los datos fueron obtenidos por medio de observación y entrevistas e interpretados de acuerdo con la perspectiva de Bourdieu, que utiliza los conceptos de habitus y campo para comprender los comportamientos que expresan lo interiorizado por personas que hacen parte de un grupo social. Para desempeñar el cuidado, los profesionales actúan de acuerdo a formas ya interiorizadas tales como: sufrir junto, ser firme y al mismo tiempo atento y cariñoso.This aim of this ethnographic study is to understand a nursing staff's cultural perspectives throughout the care of a burned client in a burn unit. Data were collected through observation and interviews and interpreted in accordance with Bourdieu's perspective, that uses the habitus concepts and field to understand the behaviors that express what is internalized by people that belong to a social group. To carry out these dimensions of care, the professionals act in agreement with the forms that already internalized, and they expressed in their depositions: to suffer together, to act firmly, and at the same time, to be kind and affectionate.

  11. An international investigation into O red blood cell unit administration in hospitals: the GRoup O Utilization Patterns (GROUP) study.

    Science.gov (United States)

    Zeller, Michelle P; Barty, Rebecca; Aandahl, Astrid; Apelseth, Torunn O; Callum, Jeannie; Dunbar, Nancy M; Elahie, Allahna; Garritsen, Henk; Hancock, Helen; Kutner, José Mauro; Manukian, Belinda; Mizuta, Shuichi; Okuda, Makoto; Pagano, Monica B; Pogłód, Ryszard; Rushford, Kylie; Selleng, Kathleen; Sørensen, Claess Henning; Sprogøe, Ulrik; Staves, Julie; Weiland, Thorsten; Wendel, Silvano; Wood, Erica M; van de Watering, Leo; van Wordragen-Vlaswinkel, Maria; Ziman, Alyssa; Jan Zwaginga, Jaap; Murphy, Michael F; Heddle, Nancy M; Yazer, Mark H

    2017-10-01

    Transfusion of group O blood to non-O recipients, or transfusion of D- blood to D+ recipients, can result in shortages of group O or D- blood, respectively. This study investigated RBC utilization patterns at hospitals around the world and explored the context and policies that guide ABO blood group and D type selection practices. This was a retrospective study on transfusion data from the 2013 calendar year. This study included a survey component that asked about hospital RBC selection and transfusion practices and a data collection component where participants submitted information on RBC unit disposition including blood group and D type of unit and recipient. Units administered to recipients of unknown ABO or D group were excluded. Thirty-eight hospitals in 11 countries responded to the survey, 30 of which provided specific RBC unit disposition data. Overall, 11.1% (21,235/191,397) of group O units were transfused to non-O recipients; 22.6% (8777/38,911) of group O D- RBC units were transfused to O D+ recipients, and 43.2% (16,800/38,911) of group O D- RBC units were transfused to recipients that were not group O D-. Disposition of units and hospital transfusion policy varied within and across hospitals of different sizes, with transfusion of group O D- units to non-group O D- patients ranging from 0% to 33%. A significant proportion of group O and D- RBC units were transfused to compatible, nonidentical recipients, although the frequency of this practice varied across sites. © 2017 AABB.

  12. Relationship between tooth dimensions and malocclusion

    International Nuclear Information System (INIS)

    Farooq, J.; Ahmed, I.; Erum, G.

    2014-01-01

    Objective: To observe the difference in dimension of teeth among adult females with and without malocclusion. Methods: The cross-sectional study was conducted at Dr. Ishrat-ul-Ebad Khan Institute of Oral Health Sciences, Dow University of Health Sciences, Karachi, from April 2011 to April 2013, and used non-probability consecutive sampling. Mesiodistal and buccolingual crown dimensions were measured on study casts by using digital sliding caliper in 2 groups of females. Group1 had 150 subjects with normal occlusion, while Group 2 had 234 with malocclusion. Independent t test was conducted to evaluate the difference between the dimensions of teeth of the two groups. Statistical analysis was done on SPSS version 16, and p value was considered significant at 0.05. Results: Overall, the difference between the groups showed a greater tooth dimension in the malocclusion group of population compared to the normal group, and the most significant difference was observed in the mesiodistal dimension of maxillary 2nd premolar, which was 0.9+-0.6801mm greater in dimension in the malocclusion group compared to the normal group. The least difference was observed in the buccolingual dimension of the mandibular central incisor where the malocclusion group had only 0.08+-0.5247mm larger mandibular central incisors in the buccolingual dimension compared to the normal group. Conclusion: Mesiodistal and buccolingual crown dimensions were characteristically larger in the malocclusion group. (author)

  13. Compacted dimensions and singular plasmonic surfaces

    Science.gov (United States)

    Pendry, J. B.; Huidobro, Paloma Arroyo; Luo, Yu; Galiffi, Emanuele

    2017-11-01

    In advanced field theories, there can be more than four dimensions to space, the excess dimensions described as compacted and unobservable on everyday length scales. We report a simple model, unconnected to field theory, for a compacted dimension realized in a metallic metasurface periodically structured in the form of a grating comprising a series of singularities. An extra dimension of the grating is hidden, and the surface plasmon excitations, though localized at the surface, are characterized by three wave vectors rather than the two of typical two-dimensional metal grating. We propose an experimental realization in a doped graphene layer.

  14. Compreendendo as dimensões de cuidado em uma unidade de emergência hospitalar Entendiendo las dimensiones de la atención en una unidad de emergencia hospittalária Understanding care dimensions in an emergency hospital unit

    Directory of Open Access Journals (Sweden)

    Maria Aparecida Baggio

    2008-10-01

    established in daily nursing work. Nineteen subjects were interviewed in an emergency hospital unit in Santa Catarina, Brazil. The data was submitted to content analysis and interpreted according to complex thought. The care dimensions, presented in six categories, mobilize and articulate the multiple human competencies and techniques of/by caring beings in the comprehension of the nursing care process, from the perspective of those who receive care, including rethinking nursing practice itself and the multiple conditions of the environment as a space for care.

  15. Origin of Everything and the 21 Dimensions of the Universe

    Science.gov (United States)

    Loev, Mark

    2009-03-01

    The Dimensions of the Universe correspond with the Dimensions of the human body. The emotion that is a positive for every dimension is Love. The negative emotion that effects each dimension are listed. All seven negative emotions effect Peace, Love and Happiness. 21st Dimension: Happiness Groin & Heart 20th Dimension: Love Groin & Heart 19th Dimension: Peace Groin & heart 18th Dimension: Imagination Wave Eyes Anger 17th Dimension: Z Wave / Closed Birth 16th Dimension: Electromagnetic Wave Ears Anger 15th Dimension: Universal Wave Skin Worry 14th Dimension: Lover Wave Blood Hate 13th Dimension: Disposal Wave Buttocks Fear 12th Dimension: Builder Wave Hands Hate 11th Dimension: Energy Wave Arms Fear 10th Dimension: Time Wave Brain Pessimism 9th Dimension: Gravity Wave Legs Fear 8th Dimension: Sweet Wave Pancreas Fear 7th Dimension: File Wave Left Lung Fear 6th Dimension: Breathing Wave Right Lung Fear 5th Dimension: Digestive Wave Stomach Fear 4th Dimension: Swab Wave Liver Guilt 3rd Dimension: Space Wave Face Sadness 2nd Dimension: Line Wave Mouth Revenge 1st Dimension: Dot Wave Nose Sadness The seven deadly sins correspond: Anger Hate Sadness Fear Worry Pessimism Revenge Note: Guilt is fear

  16. Stem cells are units of natural selection for tissue formation, for germline development, and in cancer development.

    Science.gov (United States)

    Weissman, Irving L

    2015-07-21

    It is obvious that natural selection operates at the level of individuals and collections of individuals. Nearly two decades ago we showed that in multi-individual colonies of protochordate colonial tunicates sharing a blood circulation, there exists an exchange of somatic stem cells and germline stem cells, resulting in somatic chimeras and stem cell competitions for gonadal niches. Stem cells are unlike other cells in the body in that they alone self-renew, so that they form clones that are perpetuated for the life of the organism. Stem cell competitions have allowed the emergence of competitive somatic and germline stem cell clones. Highly successful germline stem cells usually outcompete less successful competitors both in the gonads of the genotype partner from which they arise and in the gonads of the natural parabiotic partners. Therefore, natural selection also operates at the level of germline stem cell clones. In the colonial tunicate Botryllus schlosseri the formation of natural parabionts is prevented by a single-locus highly polymorphic histocompatibility gene called Botryllus histocompatibility factor. This limits germline stem cell predation to kin, as the locus has hundreds of alleles. We show that in mice germline stem cells compete for gonad niches, and in mice and humans, blood-forming stem cells also compete for bone marrow niches. We show that the clonal progression from blood-forming stem cells to acute leukemias by successive genetic and epigenetic events in blood stem cells also involves competition and selection between clones and propose that this is a general theme in cancer.

  17. Conspicuous variation of the lattice unit cell in the pavonite homologous series and its relation with cation/anion occupational modulations

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Mato, J.M., E-mail: jm.perez-mato@ehu.es [Dpto. de Física de la Materia Condensada, Facultad de Ciencia y Tecnología, UPV/EHU, Apartado 644, 48080 Bilbao (Spain); Elcoro, Luis [Dpto. de Física de la Materia Condensada, Facultad de Ciencia y Tecnología, UPV/EHU, Apartado 644, 48080 Bilbao (Spain); Makovicky, Emil [Department of Geography and Geology, University of Copenhagen, Øster Voldgade 10, DK-1350 Copenhagen K (Denmark); Topa, Dan [Department of Materials Research and Physics, University of Salzburg, Hellbrunnerstrasse 34, 5020 Salzburg (Austria); Petříček, Václav [Institute of Physics, Academy of Sciences of the Czech Republic v.v.i., Na Slovance 2, 182 21 Praha 8 (Czech Republic); Madariaga, Gotzon [Dpto. de Física de la Materia Condensada, Facultad de Ciencia y Tecnología, UPV/EHU, Apartado 644, 48080 Bilbao (Spain)

    2013-06-01

    Highlights: ► Strong non-uniform variation of unit cell parameters in the pavonite homologous series. ► Conspicuous unit cell variation due to an underlying sub-lattice with cation/anion occupation. ► A modulated model common to the whole series using the superspace formalism proposed. ► Model successfully applied to the {sup 7}P pavonite Ag{sub 3}(Bi,Pb){sub 7}S{sub 12}. ► The model can be applied in a predictive way to other members of the family. - Abstract: The pavonites is a homologous series of sulfosalts with galena-like modules of variable size. A survey of their unit cells reveals that they are severely constrained by the metrics of an underlying common average sublattice. The unit cell of any compound of the series accommodates with high precision an integer number of approximately equal subcells. This explains a peculiar non-uniform variation of the unit cell parameters within the series and evidences that the interface between the galena-like modules, despite having a very different topology, approximately maintains the subperiodicity of the modules, and must therefore be subject to strong steric restrictions. It also implies that cations and anions occupy the nodes of the observed common underlying average sublattice according to a striking alternate cation/anion occupational modulation. This is the starting point for a description of these materials as modulated structures, which can make a proficient use of the approximate atomic positional non-crystallographic correlations caused by their modular character. Under this approach only four parameters suffice to define a realistic approximate model of any member of the series. A full structural characterization of any of the compounds only requires the determination of additional small/smooth modulations. As an example, the case of the {sup 7}P pavonite Ag{sub 3}Bi{sub 6.2}Pb{sub 0.8}S{sub 12}, is analyzed.

  18. Nursing Scholars, Writing Dimensions, and Productivity.

    Science.gov (United States)

    Megel, Mary Erickson

    1987-01-01

    A study to describe cognitive, affective, and behavioral dimensions associated with writing among doctorally prepared nurses and to determine relationships between writing dimensions and journal article publication is discussed. Multiple regression analysis showed that five variables accounted for 18 percent of the variance in research article…

  19. Impact of Packet Sampling on Link Dimensioning

    NARCIS (Netherlands)

    Schmidt, R.D.O.; Sadre, R.; Sperotto, A.; Berg, H. van den; Pras, A.

    2015-01-01

    Link dimensioning is used by network operators to properly provision the capacity of their network links. Proposed methods for link dimensioning often require statistics, such as traffic variance, that need to be calculated from packet-level measurements. In practice, due to increasing traffic

  20. Impact of packet sampling on link dimensioning

    NARCIS (Netherlands)

    de Oliveira Schmidt, R.; Stadler, R.; Sadre, R.; Sperotto, Anna; van den Berg, Hans Leo; Pras, Aiko

    Link dimensioning is used by network operators to properly provision the capacity of their network links. Proposed methods for link dimensioning often require statistics, such as traffic variance, that need to be calculated from packet-level measurements. In practice, due to increasing traffic

  1. Quantum Field Theory in (0 + 1) Dimensions

    Science.gov (United States)

    Boozer, A. D.

    2007-01-01

    We show that many of the key ideas of quantum field theory can be illustrated simply and straightforwardly by using toy models in (0 + 1) dimensions. Because quantum field theory in (0 + 1) dimensions is equivalent to quantum mechanics, these models allow us to use techniques from quantum mechanics to gain insight into quantum field theory. In…

  2. search of extra space dimensions with ATLAs

    Indian Academy of Sciences (India)

    search of extra space dimensions with ATLAs. AMBREEsH GUPTA (for the ATLAs Collaboration). 5640 South Ellis Avenue, Enrico Fermi Institute, University of Chicago, Chicago,. IL 60637, USA. Abstract. If extra spatial dimensions were to exist, they could provide a solution to the hierarchy problem. The studies done by the ...

  3. Relationship Between Adult Renal Dimensions and Biometric ...

    African Journals Online (AJOL)

    We measured renal dimensions sonographically and correlated the values obtained with some anthropometric parameters in order to identify the best estimate of renal size in a clinical setting. The renal dimensions of 200 adult subjects referred for abdomino-pelvic scan at University of Nigeria Teaching Hospital, Enugu ...

  4. A unified theory in higher dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Kapetanakis, D. (National Research Centre for the Physical Sciences Democritos, Athens (Greece)); Zoupanos, G. (European Organization for Nuclear Research, Geneva (Switzerland))

    1990-10-11

    We present a grand unified model defined in ten dimensions and based on the group SO(13). The model is dimensionally reduced over the non-simply-connected space (Su(3)/U(1)xU(1))/Z{sub 2} giving in four dimensions the standard model. (orig.).

  5. A unified theory in higher dimensions

    International Nuclear Information System (INIS)

    Kapetanakis, D.; Zoupanos, G.

    1990-01-01

    We present a grand unified model defined in ten dimensions and based on the group SO(13). The model is dimensionally reduced over the non-simply-connected space [Su(3)/U(1)xU(1)]/Z 2 giving in four dimensions the standard model. (orig.)

  6. World View: The Second Hidden Dimension.

    Science.gov (United States)

    Skow, Lisa; And Others

    Proposing that world view is a dimension of culture which lies below the surface of human behavior at the level of the subconscious, this paper argues that this often ignored dimension of culture profoundly influences human communication. The paper is divided into two sections. First, world view is defined and its importance in explaining how…

  7. Potential Dimension Yields From Direct Processing

    Science.gov (United States)

    Wenjie Lin; D. Earl Kline; Philip A. Araman

    1994-01-01

    As the price of timber increases and environmental leigslation limits harvestable log volumes, the process of converting logs directly into dimension parts needs further exploration. Direct processing converts logs directly into rough green dimension parts without the intermediate steps of lumber manufacturing, grading, trading, shipping and drying. A major attraction...

  8. Four Essential Dimensions of Workplace Learning

    Science.gov (United States)

    Hopwood, Nick

    2014-01-01

    Purpose: This conceptual paper aims to argue that times, spaces, bodies and things constitute four essential dimensions of workplace learning. It examines how practices relate or hang together, taking Gherardi's texture of practices or connectedness in action as the foundation for making visible essential but often overlooked dimensions of…

  9. [Penile dimensions in type 2 diabetes].

    Science.gov (United States)

    Belousov, I I; Kogan, M I; Ibishev, H S; Vorobyev, S V; Khripun, I A; Gusova, Z R

    2015-12-01

    The current literature provides a wide range of publications on the anthropometry of the penis specifying the relationship between penile dimensions and sex hormones, weight, height and erectile function. But most of the studies involved healthy volunteers or young patients with erectile dysfunction. Our study was conducted in patients with type 2 diabetes. Penile measurements obtained in the present study were compared those of the average Russian man. The patients were divided into groups with preserved and impaired erectile function. Erectile function was also studied relative to the variability of penile dimensions. The effect of DM duration on erectile function was defined. Comparative analysis revealed the relationship between penile anatomical dimensions and erectile function. We studied the effect of type 2 diabetes on the anatomical dimensions and elasticity of the penis, established the relationship between penile dimensions and elasticity of the penis. The correlation between the severity of erectile dysfunction and serum testosterone levels on one side, and penile dimensions on the other was found. The effect of penile dimensions on erectile function in DM patients was also examined. Determining penile dimensions and their variability due to various pathological conditions or processes, may eventually lead to better result of ED management.

  10. Quality Dimensions of Internet Search Engines.

    Science.gov (United States)

    Xie, M.; Wang, H.; Goh, T. N.

    1998-01-01

    Reviews commonly used search engines (AltaVista, Excite, infoseek, Lycos, HotBot, WebCrawler), focusing on existing comparative studies; considers quality dimensions from the customer's point of view based on a SERVQUAL framework; and groups these quality expectations in five dimensions: tangibles, reliability, responsiveness, assurance, and…

  11. Nuclear transport - The regulatory dimension

    International Nuclear Information System (INIS)

    Green, L.

    2002-01-01

    The benefits that the peaceful applications of nuclear energy have brought to society are due in no small part to industry's capacity to transport radioactive materials safely, efficiently and reliably. The nuclear transport industry has a vital role in realising a fundamental objective of the International Atomic Energy Agency (IAEA) as stated in its statute to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world. The context in which transports currently take place is complex, and rapidly changing. In many respects transport is being viewed as an integral market issue and not a subsidiary concern. The availability of carriers drives routing decisions and changes in material flows necessitate new approaches to packaging and transport scenarios. Pressures on the transport sector are not without serious consequences; they can cause delays and in some cases cancellation of planned movements. Complex routings and the necessary use of chartered carriers can push up costs and work against cost efficiency. Since the events of 11 September 2001 the security of nuclear transports has contributed an added dimension to how transports take place. Transports of radioactive material have an outstanding safety record, indeed the transport of such materials could be regarded as a model for the transport of other classes of dangerous goods. This safety record is achieved by two inter-related factors. It is due primarily to well founded regulations developed by such key intergovernmental organisations as the IAEA, with the essential contributions of the member states who participate in the implementation of regulations and the review process. It is due also to the professionalism of those in the industry. There is a necessary synergy between the two - between the regulators whose task it is to make and to enforce the rules for safe, efficient and reliable transport and those whose job it is to transport within the rules. It

  12. [Endoplasmic-mitochondrial Ca(2+)-functional unit: dependence of respiration of secretory cells on activity of ryanodine- and IP3 - sensitive Ca(2+)-channels].

    Science.gov (United States)

    Velykopols'ka, O Iu; Man'ko, B O; Man'ko, V V

    2012-01-01

    Using Clark oxygen electrode, dependence of mitochondrial functions on Ca(2+)-release channels activity of Chironomus plumosus L. larvae salivary glands suspension was investigated. Cells were ATP-permeabilized in order to enable penetration of exogenous oxidative substrates. Activation of plasmalemmal P2X-receptors (as well as P2Y-receptors) per se does not modify the endogenous respiration of salivary gland suspension. That is, Ca(2+)-influx from extracellular medium does not influence functional activity of mitochondria, although they are located along the basal part of the plasma membrane. Activation of RyRs intensifies endogenous respiration and pyruvate-malate-stimulated respiration, but not succinate-stimulated respiration. Neither activation of IP3Rs (via P2Y-receptors activation), nor their inhibition alters endogenous respiration. Nevertheless, IP3Rs inhibition by 2-APB intensifies succinate-stimulated respiration. All abovementioned facts testify that Ca2+, released from stores via channels, alters functional activity of mitochondria, and undoubtedly confirm the existence of endoplasmic-mitochondrial Ca(2+)-functional unit in Ch. plumosus larvae salivary glands secretory cells. In steady state of endoplasmic-mitochondrial Ca(2+)-functional unit the spontaneous activity of IP3Rs is observed; released through IP3Rs, Ca2+ is accumulated in mitochondria via uniporter and modulates oxidative processes. Activation of RyRs induces the transition of endoplasmic-mitochondrial Ca(2+)-functional unit to the active state, which is required to intensify cell respiration and oxidative phosphorylation. As expected, the transition of endoplasmic-mitochondrial Ca(2+)-functional unit to inactivated state (i. e. inhibition of Ca(2+)-release channels at excessive [Ca2+]i) limits the duration of signal transduction, has protective nature and prevents apoptosis.

  13. A new information dimension of complex networks

    International Nuclear Information System (INIS)

    Wei, Daijun; Wei, Bo; Hu, Yong; Zhang, Haixin; Deng, Yong

    2014-01-01

    Highlights: •The proposed measure is more practical than the classical information dimension. •The difference of information for box in the box-covering algorithm is considered. •Results indicate the measure can capture the fractal property of complex networks. -- Abstract: The fractal and self-similarity properties are revealed in many complex networks. The classical information dimension is an important method to study fractal and self-similarity properties of planar networks. However, it is not practical for real complex networks. In this Letter, a new information dimension of complex networks is proposed. The nodes number in each box is considered by using the box-covering algorithm of complex networks. The proposed method is applied to calculate the fractal dimensions of some real networks. Our results show that the proposed method is efficient when dealing with the fractal dimension problem of complex networks.

  14. A new information dimension of complex networks

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Daijun [School of Computer and Information Science, Southwest University, Chongqing 400715 (China); School of Science, Hubei University for Nationalities, Enshi 445000 (China); Wei, Bo [School of Computer and Information Science, Southwest University, Chongqing 400715 (China); Hu, Yong [Institute of Business Intelligence and Knowledge Discovery, Guangdong University of Foreign Studies, Guangzhou 510006 (China); Zhang, Haixin [School of Computer and Information Science, Southwest University, Chongqing 400715 (China); Deng, Yong, E-mail: ydeng@swu.edu.cn [School of Computer and Information Science, Southwest University, Chongqing 400715 (China); School of Engineering, Vanderbilt University, TN 37235 (United States)

    2014-03-01

    Highlights: •The proposed measure is more practical than the classical information dimension. •The difference of information for box in the box-covering algorithm is considered. •Results indicate the measure can capture the fractal property of complex networks. -- Abstract: The fractal and self-similarity properties are revealed in many complex networks. The classical information dimension is an important method to study fractal and self-similarity properties of planar networks. However, it is not practical for real complex networks. In this Letter, a new information dimension of complex networks is proposed. The nodes number in each box is considered by using the box-covering algorithm of complex networks. The proposed method is applied to calculate the fractal dimensions of some real networks. Our results show that the proposed method is efficient when dealing with the fractal dimension problem of complex networks.

  15. Friendships of Indonesian and United States Youth

    Science.gov (United States)

    French, Doran C.; Pidada, Sri; Victor, Andrea

    2005-01-01

    Issues in the study of friendship across cultures were explored by reviewing a set of studies focusing on the friendships of Indonesian and United States youth. Four topics are considered: similarity of friendships across cultures, dimensions of friendships that vary across cultures, the utility of the individualism/collectivism dimension for…

  16. Geopolitical Dimensions of the Syrian Conflict

    Directory of Open Access Journals (Sweden)

    Jamal Wakim

    2016-12-01

    Full Text Available This article touches upon geopolitical dimension of the Syrian conflict. The authors consider in details regional subdivision of Syria and relations of Syrian regions with border countries. The authors of the article conclude that Arab nationalism as the Syrian state ideology and positioning of Syria as the center of Arab world were indispensable taking into account multiconfessional nature of Syria. Authors study the geostrategical doctrine of Hafez Asad (1970-2000 aimed to restore the territorial integrity of Syria (return of the Golan heights and creation of Great Syria, bring to light reasons of the alliances of Syria with Soviet Union and Iran. The authors discover reasons of hostility toward Syria from such actors as United States, Saudi Arabia, Turkey. The hostile attitude of the US political elites toward the Syrian state can be explained by American intention to undermine strategic partnership between Syria and Iran. Enmity of Saudi hostility toward the Syrian regime began with the assassination of the Lebanese Prime Minister Rafic Hariri (2005. This action destroyed the political balance in Lebanon and was considered by the Saudis as a threat to their interests. Article contains analysis of the Syrian role in the Saudi-Iranian rivalry. To opinion of the authors, Turkish involvement in the Syrian conflict began with the attempts of the regime’s change in this country and evolved to the defense of Turkish national interests from the Kurdish factor. The authors make some conclusions about the role of US, Iran, Saudi Arabia, Turkey in the Syrian conflicts. In the article it’s made some forecasts about the development of Syrian conflict. The authors especially predict possibility of disintegration of the Syrian state according to spheres of influence of the external actors involved to this conflict with Mediterranean coast, Homs and Damascus under the control of government, northern regions of the country under Kurdish control, Raqqa

  17. Optimal coordinated scheduling of combined heat and power fuel cell, wind, and photovoltaic units in micro grids considering uncertainties

    International Nuclear Information System (INIS)

    Bornapour, Mosayeb; Hooshmand, Rahmat-Allah; Khodabakhshian, Amin; Parastegari, Moein

    2016-01-01

    In this paper, a stochastic model is proposed for coordinated scheduling of combined heat and power units in micro grid considering wind turbine and photovoltaic units. Uncertainties of electrical market price; the speed of wind and solar radiation are considered using a scenario-based method. In the method, scenarios are generated using roulette wheel mechanism based on probability distribution functions of input random variables. Using this method, the probabilistic specifics of the problem are distributed and the problem is converted to a deterministic one. The type of the objective function, coordinated scheduling of combined heat and power, wind turbine, and photovoltaic units change this problem to a mixed integer nonlinear one. Therefore to solve this problem modified particle swarm optimization algorithm is employed. The mentioned uncertainties lead to an increase in profit. Moreover, the optimal coordinated scheduling of renewable energy resources and thermal units in micro grids increase the total profit. In order to evaluate the performance of the proposed method, its performance is executed on modified 33 bus distributed system as a micro grid. - Highlights: • Stochastic model is proposed for coordinated scheduling of renewable energy sources. • The effect of combined heat and power is considered. • Maximizing profits of micro grid is considered as objective function. • Considering the uncertainties of problem lead to profit increasing. • Optimal scheduling of renewable energy sources and thermal units increases profit.

  18. Lateral dimension-dependent antibacterial activity of graphene oxide sheets.

    Science.gov (United States)

    Liu, Shaobin; Hu, Ming; Zeng, Tingying Helen; Wu, Ran; Jiang, Rongrong; Wei, Jun; Wang, Liang; Kong, Jing; Chen, Yuan

    2012-08-21

    Graphene oxide (GO) is a promising precursor to produce graphene-family nanomaterials for various applications. Their potential health and environmental impacts need a good understanding of their cellular interactions. Many factors may influence their biological interactions with cells, and the lateral dimension of GO sheets is one of the most relevant material properties. In this study, a model bacterium, Escherichia coli ( E. coli ), was used to evaluate the antibacterial activity of well-dispersed GO sheets, whose lateral size differs by more than 100 times. Our results show that the antibacterial activity of GO sheets toward E. coli cells is lateral size dependent. Larger GO sheets show stronger antibacterial activity than do smaller ones, and they have different time- and concentration-dependent antibacterial activities. Large GO sheets lead to most cell loss after 1 h incubation, and their concentration strongly influences antibacterial activity at relative low concentration (oxidation capacity toward glutathione is similar, consistent with X-ray photoelectron spectroscopy and ultraviolet-visible absorption spectroscopy results. This suggests the lateral size-dependent antibacterial activity of GO sheets is caused by neither their aggregation states, nor oxidation capacity. Atomic force microscope analysis of GO sheets and cells shows that GO sheets interact strongly with cells. Large GO sheets more easily cover cells, and cells cannot proliferate once fully covered, resulting in the cell viability loss observed in the followed colony counting test. In contrast, small GO sheets adhere to the bacterial surfaces, which cannot effectively isolate cells from environment. This study highlights the importance of tailoring the lateral dimension of GO sheets to optimize the application potential with minimal risks for environmental health and safety.

  19. Fractal dimension of turbulent black holes

    Science.gov (United States)

    Westernacher-Schneider, John Ryan

    2017-11-01

    We present measurements of the fractal dimension of a turbulent asymptotically anti-de Sitter black brane reconstructed from simulated boundary fluid data at the perfect fluid order using the fluid-gravity duality. We argue that the boundary fluid energy spectrum scaling as E (k )˜k-2 is a more natural setting for the fluid-gravity duality than the Kraichnan-Kolmogorov scaling of E (k )˜k-5 /3, but we obtain fractal dimensions D for spatial sections of the horizon H ∩Σ in both cases: D =2.584 (1 ) and D =2.645 (4 ), respectively. These results are consistent with the upper bound of D =3 , thereby resolving the tension with the recent claim in Adams et al. [Phys. Rev. Lett. 112, 151602 (2014), 10.1103/PhysRevLett.112.151602] that D =3 +1 /3 . We offer a critical examination of the calculation which led to their result, and show that their proposed definition of the fractal dimension performs poorly as a fractal dimension estimator on one-dimensional curves with known fractal dimension. Finally, we describe how to define and in principle calculate the fractal dimension of spatial sections of the horizon H ∩Σ in a covariant manner, and we speculate on assigning a "bootstrapped" value of fractal dimension to the entire horizon H when it is in a statistically quasisteady turbulent state.

  20. Particle Phenomenology of Compact Extra Dimensions

    International Nuclear Information System (INIS)

    Melbeus, Henrik

    2012-01-01

    This thesis is an investigation of the subject of extra dimensions in particle physics. In recent years, there has been a large interest in this subject. In particular, a number of models have been suggested that provide solutions to some of the problem with the current Standard Model of particle physics. These models typically give rise to experimental signatures around the TeV energy scale, which means that they could be tested in the next generation of high-energy experiments, such as the LHC. Among the most important of these models are the universal extra dimensions model, the large extra dimensions model by Arkani-Hamed, Dimopolous, and Dvali, and models where right-handed neutrinos propagate in the extra dimensions. In the thesis, we study phenomenological aspects of these models, or simple modifications of them. In particular, we focus on Kaluza-Klein dark matter in universal extra dimensions models, different aspects of neutrino physics in higher dimensions, and collider phenomenology of extra dimensions. In addition, we consider consequences of the enhanced renormalization group running of physical parameters in higher-dimensional models

  1. The architectural dimension of teleworking

    Directory of Open Access Journals (Sweden)

    Iztok Kovačič

    2005-01-01

    Full Text Available The computer has become an integral part of our environment. With the integration of information and communication technologies into the working process the organization of office work is rapidly changing, influencing the office spaces as well as office buildings. The continuous evolution of sophisticated and mobile devices, developed as a result of information and communication revolution, enables us not only to work in the office but also at home, on the train, in hotels or even on the beach, in the park. The common name for this kind of activity is teleworking. One of the latest varieties is the combination of mobile work and home office that was called Sharing office. The workers usually perform most of their tasks at home and only come to office for briefings, meetings or similar kind of operation. The office building of the future will therefore be created with the purpose to connect and unite workers for common tasks and reconciliation. It will become the center point for people to meet and communicate. Architecture will therefore take upon itself the catalyst function.

  2. Structure and oxidation states of giant unit cell compound Dy{sub 117+x}Fe{sub 57-y}Sn{sub 112-z}

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Alexander T.; Barron, Keaton G.; Salazar, Bryan G.; Kirby, Parker; McCandless, Gregory T. [Department of Chemistry and Biochemistry, University of Texas, Dallas, Richardson, TX (United States); Walker, Amy V.; Chan, Julia Y. [Department of Chemistry and Biochemistry, University of Texas, Dallas, Richardson, TX (United States); Department of Materials Science and Engineering, University of Texas, Dallas, Richardson, TX (United States)

    2017-12-13

    Motivated by the complex structure and properties of giant unit cell intermetallic compounds, a new isostructural Fe analogue of the Dy{sub 117}Co{sub 57}Sn{sub 112} structure type was synthesized. Single crystals of Dy{sub 122}Fe{sub 55}Sn{sub 101} were grown at 1260 C via a Dy-Fe eutectoid flux. The Fe analogue also adopts the space group Fm anti 3m with lattice parameters a = 29.914(9) Aa, V = 26769(23) Aa{sup 3}, and Z = 4. Dy{sub 122}Fe{sub 55}Sn{sub 101} has a large cell volume, structural complexity, and consists of seven Dy, eight Fe, and ten Sn unique crystallographic sites. There are fifteen fully occupied atomic positions, three unique pairs of alternating atomic positions with positional disorder, and seven partially occupied atomic sites. Within this complex unit cell, only approximately half the unique atomic positions are fully occupied with the remainder of the atoms either positionally or occupationally disordered. X-ray photoelectron spectroscopy indicates that the compound contains Dy{sup 3+}, Fe{sup 0}, Fe{sup 2+}, Sn{sup 0}, and Sn{sup 4+}. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  3. Increase in white cell and neutrophil counts during the first eighteen weeks of treatment with clozapine in patients admitted to a long-term psychiatric care inpatient unit.

    Science.gov (United States)

    Capllonch, Adrián; de Pablo, Silvia; de la Torre, Alberto; Morales, Ignacio

    Clozapine is an antipsychotic drug that has shown to be more effective than other antipsychotics in the treatment of schizophrenia, but its use is limited due to its side effects, particularly by the risk of causing agranulocytosis. A study was made on the variations in white cell and neutrophil counts in patients treated with clozapine in a Long-term Psychiatric Unit. A retrospective observational study was conducted with a sample of women of our long-term psychiatric care unit who had been treated with clozapine. A study was made on the variations in white cell and neutrophil counts during the first 18 weeks of treatment, as well as the onset of leukopenia, neutropenia, agranulocytosis, and the influence of concomitant drugs. The study included 55 patients on treatment with clozapine. The incidence rate of neutropenia was 1.82% (95% CI; 0.05-10.13). The incidence rate of leukopenia and agranulocytosis was 0%. An increase in white cell and neutrophil counts from baseline to week 3-4 was observed. Only small variations were observed after this time, but the counts remained higher than the initial values. These changes were statistically significant in the white cell count: One-way repeated ANOVA with Greenhouse-Geisser correction F (11.47, 37) = 2.114 (P= .011); and in neutrophils: One-way repeated ANOVA with Greenhouse-Geisser correction F (10.3, 37)=3.312 (P=.0002), and MANOVA F (18, 37)=2.693 (P=.005), ŋ 2 P =0.567. The influence of concomitant drugs (lithium, valproic and biperiden) was not significant on the overall increase found in white cells or neutrophils (MANOVA). Copyright © 2016 SEP y SEPB. Publicado por Elsevier España, S.L.U. All rights reserved.

  4. Use of the Primitive Unit Cell in Understanding Subtle Features of the Cubic Closest-Packed Structure

    Science.gov (United States)

    Hawkins, John A.; Rittenhouse, Jeffrey L.; Soper, Linda M.; Rittenhouse, Robert C.

    2008-01-01

    One of the most important crystal structures adopted by metals is characterized by the "abcabc"...stacking of close-packed layers. This structure is commonly referred to in textbooks as the cubic close-packed (ccp) or face-centered cubic (fcc) structure, since the entire lattice can be generated by replication of a face-centered cubic unit cell…

  5. Social dimensions of nuclear waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Grunwald, Armin [Karlsruhe Institute of Technology, Karlsruhe (Germany). Inst. for Technology Assessment and Systems Analysis

    2015-07-01

    Nuclear waste disposal is a two-faceted challenge: a scientific and technological endeavour, on the one hand, and confronted with social dimensions, on the other. In this paper I will sketch the respective social dimensions and will give a plea for interdisciplinary research approaches. Relevant social dimensions of nuclear waste disposal are concerning safety standards, the disposal 'philosophy', the process of determining the disposal site, and the operation of a waste disposal facility. Overall, cross-cutting issues of justice, responsibility, and fairness are of major importance in all of these fields.

  6. SCHEME ANALYSIS TREE DIMENSIONS AND TOLERANCES PROCESSING

    Directory of Open Access Journals (Sweden)

    Constanta RADULESCU

    2011-07-01

    Full Text Available This paper presents one of the steps that help us to determine the optimal tolerances depending on thetechnological capability of processing equipment. To determine the tolerances in this way is necessary to takethe study and to represent schematically the operations are used in technological process of making a piece.Also in this phase will make the tree diagram of the dimensions and machining tolerances, dimensions andtolerances shown that the design execution. Determination processes, and operations of the dimensions andtolerances tree scheme will make for a machined piece is both indoor and outdoor.

  7. Social dimensions of nuclear waste disposal

    International Nuclear Information System (INIS)

    Grunwald, Armin

    2015-01-01

    Nuclear waste disposal is a two-faceted challenge: a scientific and technological endeavour, on the one hand, and confronted with social dimensions, on the other. In this paper I will sketch the respective social dimensions and will give a plea for interdisciplinary research approaches. Relevant social dimensions of nuclear waste disposal are concerning safety standards, the disposal 'philosophy', the process of determining the disposal site, and the operation of a waste disposal facility. Overall, cross-cutting issues of justice, responsibility, and fairness are of major importance in all of these fields.

  8. Modern dimensioning criteria for pressure vessels

    International Nuclear Information System (INIS)

    Roche, Roland.

    1975-01-01

    Some ideas on modern dimensioning criteria are given and their advantages with regard to both safety and economy are shown. In general these criteria result from considerations on possible damage to the apparatus in service and the modes of breakdown liable to follow. They are general enough to allow for a variety of dimensioning methods both experimental and theoretical, with special reference to modern computerized digital analysis techniques. As a practical example however some notions are given on the simplest means of computing dimensions in accordance with these criteria [fr

  9. Conformal Dimensions via Large Charge Expansion.

    Science.gov (United States)

    Banerjee, Debasish; Chandrasekharan, Shailesh; Orlando, Domenico

    2018-02-09

    We construct an efficient Monte Carlo algorithm that overcomes the severe signal-to-noise ratio problems and helps us to accurately compute the conformal dimensions of large-Q fields at the Wilson-Fisher fixed point in the O(2) universality class. Using it, we verify a recent proposal that conformal dimensions of strongly coupled conformal field theories with a global U(1) charge can be obtained via a series expansion in the inverse charge 1/Q. We find that the conformal dimensions of the lowest operator with a fixed charge Q are almost entirely determined by the first few terms in the series.

  10. Long-wavelength fluctuations and the glass transition in two dimensions and three dimensions.

    Science.gov (United States)

    Vivek, Skanda; Kelleher, Colm P; Chaikin, Paul M; Weeks, Eric R

    2017-02-21

    Phase transitions significantly differ between 2D and 3D systems, but the influence of dimensionality on the glass transition is unresolved. We use microscopy to study colloidal systems as they approach their glass transitions at high concentrations and find differences between two dimensions and three dimensions. We find that, in two dimensions, particles can undergo large displacements without changing their position relative to their neighbors, in contrast with three dimensions. This is related to Mermin-Wagner long-wavelength fluctuations that influence phase transitions in two dimensions. However, when measuring particle motion only relative to their neighbors, two dimensions and three dimensions have similar behavior as the glass transition is approached, showing that the long-wavelength fluctuations do not cause a fundamental distinction between 2D and 3D glass transitions.

  11. Characteristics of cells producing stimulator for the proliferation of colony forming unit-spleen (CFU-S)

    International Nuclear Information System (INIS)

    Abdul Manaf Ali; Wright, E.G.; Riches, A.C.

    1994-01-01

    The presence of stimulator for haemopoietic stem cell (CFU-S) proliferation in regenerating bone marrow was assayed by incubating the conditioned medium (CM) prepared from bone marrow with quiescent CFU-S from normal bone marrow. The percentage of CFU-S normal bone marrow in DNA synthesis increased more than 30 percent after incubating with CM of 4.5 Gy regenerating bone marrow. Stimulator was also present in bone marrow of mice at 9.0 Gy whole body X-irradiation. However the conditioned medium prepared from regenerating bone marrow without Fc and Ia-2k cells failed to increase the percentage of CFU-S in DNA synthesis. On the other hand, elimination of Thy 1.2 positive cells with complement cytolysis did not affect the ability of regenerating bone marrow to produce stimulator. These observations suggest that the stimulator producing cells are radio-resistant, Thy 1.2 negative, Fc and Ia-2k positive

  12. Risk and outcome analysis of 1832 consecutively excised basal cell carcinomas in a tertiary referral plastic surgery unit.

    LENUS (Irish Health Repository)

    Malik, Vinod

    2012-02-01

    BACKGROUND: Basal cell carcinomas are the most prevalent of all skin cancers worldwide and form the majority of the surgical workload for most modern cutaneous malignancy centres. Primary surgical removal of basal cell carcinomas remains the gold standard of treatment but, despite almost two centuries of surgical experience, rates of incomplete surgical excision of up to 50% are still reported. The aim of this study was to assess, quantify and perform comparative analysis of the outcomes and predictive factors of consecutive primarily-excised basal cell carcinomas in a tertiary centre over a six-year period. METHODS: Retrospective audit was conducted on all patients who underwent surgical excision of basal cell carcinomas from January 2000 to December 2005. Assessment parameters included patient biographics, tumour management differences and detailed histopathological analysis of tumour margins and subtypes. RESULTS: One thousand eight hundred and thirty two basal cell carcinomas were excised from 1329 patients over the designated time period. Two hundred and fifty one (14%) lesions were incompletely excised with 135 (7.4%) involving the peripheral margin only, 48 (2.6%) the deep margin only and 41 (2.2%) involving both. Nasal location was the most common predictor of incomplete excision. CONCLUSIONS: Overall basal cell carcinomas excision rates compared favourably with international reported standards but attention to a variety of surgical and histological risk factors may improve this further.

  13. A pixel unit-cell targeting 16ns resolution and radiation hardness in a column read-out particle vertex detector

    International Nuclear Information System (INIS)

    Wright, M.; Millaud, J.; Nygren, D.

    1993-01-01

    A pixel unit cell (PUC) circuit architecture, optimized for a column read out architecture, is reported. Each PUC contains an integrator, active filter, comparator, and optional analog store. The time-over-threshold (TOT) discriminator allows an all-digital interface to the array periphery readout while passing an analog measure of collected charge. Use of (existing) radiation hard processes, to build a detector bump-bonded to a pixel readout array, is targeted. Here emphasis is on a qualitative explanation of how the unique circuit implementation benefits operation for Super Collider (SSC) detector application. (orig.)

  14. A pixel unit-cell targeting 16 ns resolution and radiation hardness in a column read-out particle vertex detector

    International Nuclear Information System (INIS)

    Wright, M.; Millaud, J.; Nygren, D.

    1992-10-01

    A pixel unit cell (PUC) circuit architecture, optimized for a column read out architecture, is reported. Each PUC contains an integrator, active filter, comparator, and optional analog store. The time-over-threshold (TOT) discriminator allows an all-digital interface to the array periphery readout while passing an analog measure of collected charge. Use of (existing) radiation hard processes, to build a detector bump-bonded to a pixel readout array, is targeted. Here, emphasis is on a qualitative explanation of how the unique circuit implementation benefits operation for Super Collider (SSC) detector application

  15. The existential dimension in general practice

    DEFF Research Database (Denmark)

    Assing Hvidt, Elisabeth; Søndergård, Jens; Ammentorp, Jette

    2016-01-01

    OBJECTIVE: The objective of this study is to identify points of agreement and disagreements among general practitioners (GPs) in Denmark concerning how the existential dimension is understood, and when and how it is integrated in the GP-patient encounter. DESIGN: A qualitative methodology with semi......-structured focus group interviews was employed. SETTING: General practice setting in Denmark. SUBJECTS: Thirty-one GPs from two Danish regions between 38 and 68 years of age participated in seven focus group interviews. RESULTS: Although understood to involve broad life conditions such as present and future being...... POINTS: Although integration of the existential dimension is recommended for patient care in general practice, little is known about GPs’ understanding and integration of this dimension in the GP-patient encounter. The existential dimension is understood to involve broad and universal life conditions...

  16. Extra dimensions and black hole production

    International Nuclear Information System (INIS)

    Pagliarona, C.

    2001-01-01

    This article reviews recent development in models with Large Extra Dimensions and Black hole production at future colliders. Experimental results from current experiments as well as the expectation for the future colliders are summarized

  17. Identifying the Gender Dimension in Research Content

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, D.; Lalonde, B.St.L.; Tippett, C.; Archambault, E.; Callaert, J.; Mantouvalou, K.; Arora, L.

    2016-07-01

    Globally, there is an increasing interest in integrating the gender dimension in research content (GDRC). As a first step towards monitoring progress in this area, a new indicator measuring the proportion of a country’s scientific publications integrating a gender dimension in their subject matter was developed for the European Commission’s She Figures 2015 publication. This indicator is based on a keyword-based query covering both sex-related terms (biological characteristics of both women and men) and gender-related terms (social/cultural factors of both women and men). The final GDRC dataset consisted of some 212,600 distinct publications including a gender dimension in their research content. Findings suggest that integrating a gender dimension into research content is relatively rare. Unsurprisingly, it was less common for scientific articles in the fields of agricultural sciences, engineering and technology, and natural sciences to do so, and more common in the social sciences. (Author)

  18. The existential dimension in general practice

    DEFF Research Database (Denmark)

    Assing Hvidt, Elisabeth; Søndergaard, Jens; Ammentorp, Jette

    2016-01-01

    Objective: The objective of this study is to identify points of agreement and disagreements among general practitioners (GPs) in Denmark concerning how the existential dimension is understood, and when and how it is integrated in the GP–patient encounter. Design: A qualitative methodology with semi......-structured focus group interviews was employed. Setting: General practice setting in Denmark. Subjects: Thirty-one GPs from two Danish regions between 38 and 68 years of age participated in seven focus group interviews. Results: Although understood to involve broad life conditions such as present and future being...... points Although integration of the existential dimension is recommended for patient care in general practice, little is known about GPs’ understanding and integration of this dimension in the GP–patient encounter. The existential dimension is understood to involve broad and universal life conditions...

  19. Casimir Energy, Extra Dimensions and Exotic Propulsion

    Science.gov (United States)

    Obousy, R.; Saharian, A.

    It is well known that the Casimir effect is an excellent candidate for the stabilization of the extra dimensions. It has also been suggested that the Casimir effect in higher dimensions may be the underlying phenomenon that is responsible for the dark energy which is currently driving the accelerated expansion of the universe. In this paper we suggest that, in principle, it may be possible to directly manipulate the size of an extra dimension locally using Standard Model fields in the next generation of particle accelerators. This adjustment of the size of the higher dimension could serve as a technological mechanism to locally adjust the dark energy density and change the local expansion of spacetime. This idea holds tantalizing possibilities in the context of exotic spacecraft propulsion.

  20. Evolution Of The Concept Of Dimension

    International Nuclear Information System (INIS)

    Journeau, Philippe F.

    2007-01-01

    Concepts of time elapsing 'in' a space measuring the real emerge over the centuries. But Kant refutes absolute time and defines it, with space, as forms reacting to Newtonian mechanics. Einstein and Minkowski open a 20th century where time is a dimension, a substratum of reality 'with' space rather than 'in' it. Kaluza-Klein and String theories then develop a trend of additional spatial dimensions while de Broglie and Bohm open the possiblity that form, to begin with wave, be a reality together 'with' a space-time particle. Other recent theories, such as spin networks, causal sets and twistor theory, even head to the idea of other 'systems of dimensions'. On the basis of such progresses and recent experiments the paper then considers a background independent fourfold time-form-action-space system of dimensions

  1. The spectral dimension of random trees

    International Nuclear Information System (INIS)

    Destri, Claudio; Donetti, Luca

    2002-01-01

    We present a simple yet rigorous approach to the determination of the spectral dimension of random trees, based on the study of the massless limit of the Gaussian model on such trees. As a by-product, we obtain evidence in favour of a new scaling hypothesis for the Gaussian model on generic bounded graphs and in favour of a previously conjectured exact relation between spectral and connectivity dimensions on more general tree-like structures

  2. Quantum simulation of an extra dimension.

    Science.gov (United States)

    Boada, O; Celi, A; Latorre, J I; Lewenstein, M

    2012-03-30

    We present a general strategy to simulate a D+1-dimensional quantum system using a D-dimensional one. We analyze in detail a feasible implementation of our scheme using optical lattice technology. The simplest nontrivial realization of a fourth dimension corresponds to the creation of a bi-volume geometry. We also propose single- and many-particle experimental signatures to detect the effects of the extra dimension.

  3. Bar dimensions and bar shapes in estuaries

    Science.gov (United States)

    Leuven, Jasper; Kleinhans, Maarten; Weisscher, Steven; van der Vegt, Maarten

    2016-04-01

    Estuaries cause fascinating patterns of dynamic channels and shoals. Intertidal sandbars are valuable habitats, whilst channels provide access to harbors. We still lack a full explanation and classification scheme for the shapes and dimensions of bar patterns in natural estuaries, in contrast with bars in rivers. Analytical physics-based models suggest that bar length in estuaries increases with flow velocity, tidal excursion length or estuary width, depending on which model. However, these hypotheses were never validated for lack of data and experiments. We present a large dataset and determine the controls on bar shape and dimensions in estuaries, spanning bar lengths from centimeters (experiments) to 10s of kilometers length. First, we visually identified and classified 190 bars, measured their dimensions (width, length, height) and local braiding index. Data on estuarine geometry and tidal characteristics were obtained from governmental databases and literature on case studies. We found that many complex bars can be seen as simple elongated bars partly cut by mutually evasive ebb- and flood-dominated channels. Data analysis shows that bar dimensions scale with estuary dimensions, in particular estuary width. Breaking up the complex bars in simple bars greatly reduced scatter. Analytical bar theory overpredicts bar dimensions by an order of magnitude in case of small estuarine systems. Likewise, braiding index depends on local width-to-depth ratio, as was previously found for river systems. Our results suggest that estuary dimensions determine the order of magnitude of bar dimensions, while tidal characteristics modify this. We will continue to model bars numerically and experimentally. Our dataset on tidal bars enables future studies on the sedimentary architecture of geologically complex tidal deposits and enables studying effects of man-induced perturbations such as dredging and dumping on bar and channel patterns and habitats.

  4. SCHEME ANALYSIS TREE DIMENSIONS AND TOLERANCES PROCESSING

    OpenAIRE

    Constanta RADULESCU; Liviu Marius CÎRŢÎNĂ; Constantin MILITARU

    2011-01-01

    This paper presents one of the steps that help us to determine the optimal tolerances depending on thetechnological capability of processing equipment. To determine the tolerances in this way is necessary to takethe study and to represent schematically the operations are used in technological process of making a piece.Also in this phase will make the tree diagram of the dimensions and machining tolerances, dimensions andtolerances shown that the design execution. Determination processes, and ...

  5. Hydrogen equation in spaces of arbitrary dimensions

    International Nuclear Information System (INIS)

    Amusia, M Ya

    2015-01-01

    We note that presenting Hydrogen atom Schrodinger equation in the case of arbitrary dimensions require simultaneous modification of the Coulomb potential that only in three dimensions has the form Z / r. This was not done in a number of relatively recent papers (see [1] and references therein). Therefore, some results obtained in [1] seem to be doubtful. Several required considerations in the area are mentioned. (paper)

  6. Antecedents and Dimensions of Supply Chain Robustness

    OpenAIRE

    Durach, Christian F.; Wieland, Andreas; Machuca, Jose A.D.

    2015-01-01

    Purpose – The purpose of this paper is to provide groundwork for an emerging theory of supply chain robustness – which has been conceptualized as a dimension of supply chain resilience – through reviewing and synthesizing related yet disconnected studies. The paper develops a formal definition of supply chain robustness to build a framework that captures the dimensions, antecedents and moderators of the construct as discussed in the literature. Design/methodology/approach – The...

  7. Measure and dimension functions: measurability and densities

    Science.gov (United States)

    Mattila, Pertti; Mauldin, R. Daniel

    1997-01-01

    During the past several years, new types of geometric measure and dimension have been introduced; the packing measure and dimension, see [Su], [Tr] and [TT1]. These notions are playing an increasingly prevalent role in various aspects of dynamics and measure theory. Packing measure is a sort of dual of Hausdorff measure in that it is defined in terms of packings rather than coverings. However, in contrast to Hausdorff measure, the usual definition of packing measure requires two limiting procedures, first the construction of a premeasure and then a second standard limiting process to obtain the measure. This makes packing measure somewhat delicate to deal with. The question arises as to whether there is some simpler method for defining packing measure and dimension. In this paper, we find a basic limitation on this possibility. We do this by determining the descriptive set-theoretic complexity of the packing functions. Whereas the Hausdorff dimension function on the space of compact sets is Borel measurable, the packing dimension function is not. On the other hand, we show that the packing dimension functions are measurable with respect to the [sigma]-algebra generated by the analytic sets. Thus, the usual sorts of measurability properties used in connection with Hausdorff measure, for example measures of sections and projections, remain true for packing measure.

  8. Antisocial behavior: Dimension or category(ies?

    Directory of Open Access Journals (Sweden)

    Biro Mikloš

    2008-01-01

    Full Text Available Classificatory systems (DSM-IV, ICD-10 use different criteria for defining a rather common antisocial disorder, traditionally referred as psychopathy. Most empirical studies of this phenomenon use Cleckley's operational definition that was applied and amended in Hare's revised Psychopathy Checklist (PCL-R. In modern literature, the fact that there is less than a perfect correspondence between classificatory systems and Hare's PCL-R is often cited as an indication that antisocial behavior is not confined to a distinct category of people but is rather a continuous personality dimension. In order to further elucidate the nosology of antisocial behaviors, a Psychopathy Assessment Questionnaire (PAQ based on Cleckley - Hare's criteria and consisting of 40 binary items was administered to 339 men (135 prisoners and 204 members of the general population. Four distinct clusters of respondents were identified by means of hierarchical cluster analysis: Psychopathic type (characterized by high positive scores on dimension of Unemotionality; Antisocial type (characterized by high positive scores on Social deviance dimension; Adapted type (characterized by negative scores on all dimensions; and Hyper-controlled type (characterized by extremely negative scores on dimension Social deviance accompanied with positive scores on Unemotionality dimension. Additional comparison with MMPI profiles which classified prison sample in two groups ("Psychopathic profiles" and "Non- Psychopathic profiles" shows that there is no expected compatibility between MMPI and PAQ. We conclude that Antisocial type can be treated as a distinct category, while Psychopathic type displays characteristics of dimensional distribution.

  9. Chromatic Dimensions Earthy, Watery, Airy, and Fiery.

    Science.gov (United States)

    Albertazzi, Liliana; Koenderink, Jan J; van Doorn, Andrea

    2015-01-01

    In our study, for a small number of antonyms, we investigate whether they are cross-modally or ideaesthetically related to the space of colors. We analyze the affinities of seven antonyms (cold-hot, dull-radiant, dead-vivid, soft-hard, transparent-chalky, dry-wet, and acid-treacly) and their intermediate connotations (cool-warm, matt-shiny, numb-lively, mellow-firm, semi-transparent-opaque, semi-dry-moist, and sour-sweet) as a function of color. We find that some antonyms relate to chromatic dimensions, others to achromatic ones. The cold-hot antonym proves to be the most salient dimension. The dry-wet dimension coincides with the cold-hot dimension, with dry corresponding to hot and wet to cold. The acid-treacly dimension proves to be transversal to the cold-hot dimension; hence, the pairs mutually span the chromatic domain. The cold-hot and acid-treacly antonyms perhaps recall Hering's opponent color system. The dull-radiant, transparent-chalky, and dead-vivid pairs depend little upon chromaticity. Of all seven antonyms, only the soft-hard one turns out to be independent of the chromatic structure. © The Author(s) 2015.

  10. Novel hydroxyamides and amides containing D-glucopyranose or D-fructose units: Biological assays in MCF-7 and MDST8 cell lines.

    Science.gov (United States)

    Carreiro, Elisabete P; Costa, Ana R; Cordeiro, Maria M; Martins, Rute; Pires, Tiago O; Saraiva, Mafalda; Antunes, Célia M; Burke, Anthony J

    2016-02-01

    A novel library of 15 compounds, hydroxyamides and amides containing a β-D-glucopyranose (D-Gluc) or a β-D-fructose (D-Fruc) units was designed and synthesized for antiproliferative assays in breast (MCF-7) and colon (MDST8) cancer cell lines. Twelve of them were hydroxyamides and were successfully synthesized from β-D-glucuronic acid (D-GluA). Six of these hydroxyamides which were acetylated hydroxy-β-D-glucopyranuronamide 2a-2f (1st Family) and the other six were their respective isomers, that is, hydroxy-β-D-fructuronamide 3a-3f (2nd Family), obtained by acid-base catalyzed isomerization. These compounds have the general structure, D-Gluc-C=ONH-CHR-(CH2)n-OH and D-Fruc-C=ONH-CHR-(CH2)n-OH, where R=an aromatic, alkyl or a hydrogen substituent, with n=0 or 1. Eight of these contained a chiral aminoalcohol group. Three compounds were amides containing a D-glucopyranose unit (3rd Family). SAR studies were conducted with these compounds. Antiproliferative studies showed that compound 4a, the bromo-amide containing the β-D-glucopyranose ring, potently inhibits the proliferation of the MDST8 cells. Five compounds (2e, 2f, 3d, 3e, and 3f) were shown to potently selectively inhibit the proliferation of the MCF-7 cells. Compound 4b was the only one showing inhibition in both cell lines. In general, the more active compounds were the amides and hydroxyamides containing the β-D-fructose moiety, and containing an alkyl group or hydrogen. Half-inhibitory concentrations (IC50) of between 0.01 and 10 μM, were observed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Protein Adsorption in Three Dimensions

    Science.gov (United States)

    Vogler, Erwin A.

    2011-01-01

    initially-adsorbed protein. Interphase protein concentration CI increases as VI decreases, resulting in slow reduction in interfacial energetics. Steady-state is governed by a net partition coefficient P=(/CBCI). In the process of occupying space within the interphase, adsorbing protein molecules must displace an equivalent volume of interphase water. Interphase water is itself associated with surface-bound water through a network of transient hydrogen bonds. Displacement of interphase water thus requires an amount of energy that depends on the adsorbent surface chemistry/energy. This “adsorption-dehydration” step is the significant free-energy cost of adsorption that controls the maximum amount of protein that can be adsorbed at steady state to a unit adsorbent-surface area (the adsorbent capacity). As adsorbent hydrophilicity increases, protein adsorption monotonically decreases because the energetic cost of surface dehydration increases, ultimately leading to no protein adsorption near an adsorbent water wettability (surface energy) characterized by a water contact angle θ → 65°. Consequently, protein does not adsorb (accumulate at interphase concentrations greater than bulk solution) to more hydrophilic adsorbents exhibiting θ protein/surface interactions can be highly favorable, causing protein to adsorb in multilayers in a relatively thick interphase. A straightforward, three-component free energy relationship captures salient features of protein adsorption to all surfaces predicting that the overall free energy of protein adsorption ΔGadso is a relatively small multiple of thermal energy for any surface chemistry (except perhaps for bioengineered surfaces bearing specific ligands for adsorbing protein) because a surface chemistry that interacts chemically with proteins must also interact with water through hydrogen bonding. In this way, water moderates protein adsorption to any surface by competing with adsorbing protein molecules. This Leading Opinion ends

  12. Numerical Study of the Dynamic Response of Heat and Mass Transfer to Operation Mode Switching of a Unitized Regenerative Fuel Cell

    Directory of Open Access Journals (Sweden)

    Hong Xiao

    2016-12-01

    Full Text Available Knowledge concerning the complicated changes of mass and heat transfer is desired to improve the performance and durability of unitized regenerative fuel cells (URFCs. In this study, a transient, non-isothermal, single-phase, and multi-physics mathematical model for a URFC based on the proton exchange membrane is generated to investigate transient responses in the process of operation mode switching from fuel cell (FC to electrolysis cell (EC. Various heat generation mechanisms, including Joule heat, reaction heat, and the heat attributed to activation polarizations, have been considered in the transient model coupled with electrochemical reaction and mass transfer in porous electrodes. The polarization curves of the steady-state models are validated by experimental data in the literatures. Numerical results reveal that current density, gas mass fractions, and temperature suddenly change with the sudden change of operating voltage in the mode switching process. The response time of temperature is longer than that of current density and gas mass fractions. In both FC and EC modes, the cell temperature and gradient of gas mass fraction in the oxygen side are larger than that in the hydrogen side. The temperature difference of the entire cell is less than 1.5 K. The highest temperature appears at oxygen-side catalyst layer under the FC mode and at membrane under a more stable EC mode. The cell is exothermic all the time. These dynamic responses and phenomena have important implications for heat analysis and provide proven guidelines for the improvement of URFCs mode switching.

  13. Compact modeling of a telecom back-up unit powered by air-cooled proton exchange membrane fuel cell

    DEFF Research Database (Denmark)

    Gao, Xin; Kær, Søren Knudsen

    2018-01-01

    Applications of proton exchange membrane fuel cells (PEMFC’s) are expanding in portable, automotive and stationary markets. One promising application is the back-up power for telecommunication applications in remote areas where usually air-cooled PMEFC’s are used. An air-cooled PEMFC system is much...

  14. Synthesis, Crystal Structure, and Magnetic Properties of Giant Unit Cell Intermetallics R117Co52+δSn112+γ (R = Y, La, Pr, Nd, Ho

    Directory of Open Access Journals (Sweden)

    Ping Chai

    2016-12-01

    Full Text Available Ternary intermetallics R117Co52+δSn112+γ (R = Y, La, Pr, Nd, and Ho have been prepared by arc-melting followed by annealing at 800 °C. All the compounds belong to the Tb117Fe52Ge112 structure type (space group Fm 3 ¯ m characterized by a complex giant cubic unit cell with a ~ 30 Å. The single-crystal structure determination of Y- and La-containing compounds reveals a significant structural disorder. A comparison of these and earlier reported crystal structures of R117Co52+δSn112+γ suggests that more extensive disorder occurs for structures that contain larger lanthanide atoms. This observation can be explained by the need to maintain optimal bonding interactions as the size of the unit cell increases. Y117Co56Sn115 exhibits weak paramagnetism due to the Co sublattice and does not show magnetic ordering in the 1.8–300 K range. Ho117Co55Sn108 shows ferromagnetic ordering at 10.6 K. Both Pr117Co54Sn112 and Nd117Co54Sn111 exhibit antiferromagnetic ordering at 17 K and 24.7 K, respectively, followed by a spin reorientation transition at lower temperature.

  15. Selective Laser Melting: a regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications.

    Science.gov (United States)

    Mullen, Lewis; Stamp, Robin C; Brooks, Wesley K; Jones, Eric; Sutcliffe, Christopher J

    2009-05-01

    In this study, a novel porous titanium structure for the purpose of bone in-growth has been designed, manufactured and evaluated. The structure was produced by Selective Laser Melting (SLM); a rapid manufacturing process capable of producing highly intricate, functionally graded parts. The technique described utilizes an approach based on a defined regular unit cell to design and produce structures with a large range of both physical and mechanical properties. These properties can be tailored to suit specific requirements; in particular, functionally graded structures with bone in-growth surfaces exhibiting properties comparable to those of human bone have been manufactured. The structures were manufactured and characterized by unit cell size, strand diameter, porosity, and compression strength. They exhibited a porosity (10-95%) dependant compression strength (0.5-350 Mpa) comparable to the typical naturally occurring range. It is also demonstrated that optimized structures have been produced that possesses ideal qualities for bone in-growth applications and that these structures can be applied in the production of orthopedic devices. (c) 2008 Wiley Periodicals, Inc.

  16. Simulation of the behaviour of a set of Cu/sub 2/S-CdS unit photocells

    Energy Technology Data Exchange (ETDEWEB)

    Jacquemin, J L; Bordure, G

    1982-03-01

    With the help of a general simulation program (the Spice II program from the University of California, Berkeley), adapted to photocell modelling, we studied the behaviour of a large solar photocell consisting of smaller Cu/sub 2/S-CdS unit solar cells in parallel. In particular we examined a theoretical set of photocells identical with the best cell made in the laboratory, a set of 30 real photocells characterized individually and the effect of introducing low efficiency cells. We indicate the role of each parameter characterizing the photocells in order to improve the behaviour of photovoltaic panels of larger dimensions.

  17. Mixed-valence molecular four-dot unit for quantum cellular automata: Vibronic self-trapping and cell-cell response.

    Science.gov (United States)

    Tsukerblat, Boris; Palii, Andrew; Clemente-Juan, Juan Modesto; Coronado, Eugenio

    2015-10-07

    Our interest in this article is prompted by the vibronic problem of charge polarized states in the four-dot molecular quantum cellular automata (mQCA), a paradigm for nanoelectronics, in which binary information is encoded in charge configuration of the mQCA cell. Here, we report the evaluation of the electronic levels and adiabatic potentials of mixed-valence (MV) tetra-ruthenium (2Ru(ii) + 2Ru(iii)) derivatives (assembled as two coupled Creutz-Taube complexes) for which molecular implementations of quantum cellular automata (QCA) was proposed. The cell based on this molecule includes two holes shared among four spinless sites and correspondingly we employ the model which takes into account the two relevant electron transfer processes (through the side and through the diagonal of the square) as well as the difference in Coulomb energies for different instant positions of localization of the hole pair. The combined Jahn-Teller (JT) and pseudo JT vibronic coupling is treated within the conventional Piepho-Krauzs-Schatz model adapted to a bi-electronic MV species with the square-planar topology. The adiabatic potentials are evaluated for the low lying Coulomb levels in which the antipodal sites are occupied, the case just actual for utilization in mQCA. The conditions for the vibronic self-trapping in spin-singlet and spin-triplet states are revealed in terms of the two actual transfer pathways parameters and the strength of the vibronic coupling. Spin related effects in degrees of the localization which are found for spin-singlet and spin-triplet states are discussed. The polarization of the cell is evaluated and we demonstrate how the partial delocalization caused by the joint action of the vibronic coupling and electron transfer processes influences polarization of a four-dot cell. The results obtained within the adiabatic approach are compared with those based on the numerical solution of the dynamic vibronic problem. Finally, the Coulomb interaction between

  18. Childhood trauma and dimensions of depression: a specific association with the cognitive domain

    Directory of Open Access Journals (Sweden)

    Edgar A. Vares

    2015-01-01

    Full Text Available Objective: To investigate associations between a history of childhood trauma and dimensions of depression in a sample of clinically depressed patients. Methods: A sample of 217 patients from a mood-disorder outpatient unit was investigated with the Beck Depression Inventory, the Hamilton Depression Rating Scale, the CORE Assessment of Psychomotor Change, and the Childhood Trauma Questionnaire. A previous latent model identifying six depressive dimensions was used for analysis. Path analysis and Multiple Indicators Multiple Causes (MIMIC models were used to investigate associations between general childhood trauma and childhood maltreatment modalities (emotional, sexual, and physical abuse; emotional and physical neglect with dimensions of depression (sexual, cognition, insomnia, appetite, non-interactiveness/retardation, and agitation. Results: The overall childhood trauma index was uniquely associated with cognitive aspects of depression, but not with any other depressive dimension. An investigation of childhood maltreatment modalities revealed that emotional abuse was consistently associated with depression severity in the cognitive dimension. Conclusion: Childhood trauma, and specifically emotional abuse, could be significant risk factors for the subsequent development of cognitive symptoms of major depression. These influences might be specific to this depressive dimension and not found in any other dimension, which might have conceptual and therapeutic implications for clinicians and researchers alike.

  19. Microscopic Disease Extension in Three Dimensions for Non–Small-Cell Lung Cancer: Development of a Prediction Model Using Pathology-Validated Positron Emission Tomography and Computed Tomography Features

    International Nuclear Information System (INIS)

    Loon, Judith van; Siedschlag, Christian; Stroom, Joep; Blauwgeers, Hans; Suylen, Robert-Jan van; Knegjens, Joost; Rossi, Maddalena; Baardwijk, Angela van; Boersma, Liesbeth; Klomp, Houke; Vogel, Wouter; Burgers, Sjaak; Gilhuijs, Kenneth

    2012-01-01

    Purpose: One major uncertainty in radiotherapy planning of non–small-cell lung cancer concerns the definition of the clinical target volume (CTV), meant to cover potential microscopic disease extension (MDE) around the macroscopically visible tumor. The primary aim of this study was to establish pretreatment risk factors for the presence of MDE. The secondary aim was to establish the impact of these factors on the accuracy of positron emission tomography (PET) and computed tomography (CT) to assess the total tumor-bearing region at pathologic examination (CTV path ). Methods and Materials: 34 patients with non–small-cell lung cancer who underwent CT and PET before lobectomy were included. Specimens were examined microscopically for MDE. The gross tumor volume (GTV) on CT and PET (GTV CT and GTV PET , respectively) was compared with the GTV and the CTV at pathologic examination, tissue deformations being taken into account. Using multivariate logistic regression, image-based risk factors for the presence of MDE were identified, and a prediction model was developed based on these factors. Results: MDE was found in 17 of 34 patients (50%). The MDE did not exceed 26 mm in 90% of patients. In multivariate analysis, two parameters (mean CT tumor density and GTV CT ) were significantly associated with MDE. The area under the curve of the two-parameter prediction model was 0.86. Thirteen tumors (38%, 95% CI: 24–55%) were identified as low risk for MDE, being potential candidates for reduced-intensity therapy around the GTV. In the low-risk group, the effective diameter of the GTV CT/PET accurately represented the CTV path . In the high-risk group, GTV CT/PET underestimated the CTV path with, on average, 19.2 and 26.7 mm, respectively. Conclusions: CT features have potential to predict the presence of MDE. Tumors identified as low risk of MDE show lower rates of disease around the GTV than do high-risk tumors. Both CT and PET accurately visualize the CTV path in low

  20. The Ground State Energy of a Dilute Bose Gas in Dimension $n\\geq 3$

    DEFF Research Database (Denmark)

    Aaen, Anders Gottfred

    We consider a Bose gas in spatial dimension n≥3 with a repulsive, radially symmetric two-body potential V. In the limit of low density ρ, the ground state energy per particle in the thermodynamic limit is shown to be (n−2)|Sn−1|an−2ρ, where |Sn−1| denotes the surface measure of the unit sphere...... in Rn, and a is the scattering length of V. Furthermore, for smooth and compactly supported two-body potentials, we derive an upper bound to the ground state energy with a correction term (1+γ)8π4a6ρ2|ln(a4ρ)| in 4 dimensions, where 0... dimensions. Finally, we use a grand canonical construction to give a simplified proof of the second order upper bound to the Lee-Huang-Yang formula, a result first obtained by Yau and Yin. We also test this method in 4 dimensions, but with a negative outcome....

  1. The impact of servant leadership dimensions on leader-member exchange among health care professionals.

    Science.gov (United States)

    Hanse, Jan Johansson; Harlin, Ulrika; Jarebrant, Caroline; Ulin, Kerstin; Winkel, Jörgen

    2016-03-01

    The aim of the current study was to investigate the impact of servant leadership dimensions on leader-member exchange (LMX) among health-care professionals. Leadership support and the quality of the dyadic relationship between the leader and the employee are essential regarding the work environment and turnover intentions in health care. A questionnaire-based cross-sectional study was undertaken at four hospital units in Sweden. The study sample included 240 employees. Significant bivariate correlations were found between all servant leadership dimensions and LMX. The strongest correlations were found between 'humility' and LMX (r = 0.69, P servant leadership dimensions were strongly related to LMX. The results identify specific servant leadership dimensions that are likely to be useful for developing a stronger exchange relationship between the leader (e.g. nursing manager) and individual subordinates in health care. © 2015 John Wiley & Sons Ltd.

  2. Universality and Distinctiveness in Dimensions of Japanese Person Perception

    Science.gov (United States)

    Bond, Michael H.; And Others

    1975-01-01

    Dimensions of Japanese person perception are assessed through an instrument standardized to tap basic dimensions of person perception and whose scales are defined behaviorally. Dimensions are then compared statistically with results from similar cross-cultural studies. (AM)

  3. Binary co-generative plants with height temperature SOFC fuel cells

    International Nuclear Information System (INIS)

    Tashevski, D; Dimitrov, K.; Armenski, S.

    2005-01-01

    In this paper, a field of binary co-generative plants with height temperature SOFC fuel cells is presented. Special attention of application of height temperature SOFC fuel cells and binary co-generative units has been given. These units made triple electricity and heat. Principle of combination of fuel cells with binary cycles has been presented. A model and computer programme for calculation of BKPFC, has been created. By using the program, all the important characteristic-results are calculated: power, efficiency, emission, dimension and economic analysis. On base of results, conclusions and recommendations has been given. (Author)

  4. Binary co-generative plants with height temperature SOFC fuel cells

    International Nuclear Information System (INIS)

    Tashevski, D; Dimitrov, K.; Armenski, S.

    2006-01-01

    In this paper, a field of binary co-generative plants with height temperature SOFC fuel cells is presented. Special attention of application of height temperature SOFC fuel cells and binary co-generative units has been given. These units made triple electricity and heat. Principle of combination of fuel cells with binary cycles has been presented. A model and computer programme for calculation of BKPFC, has been created. By using the program, all the important characteristic-results are calculated: power, efficiency, emission, dimension and economic analysis. On base of results, conclusions and recommendations has been given. (Author)

  5. Accelerated Dimension-Independent Adaptive Metropolis

    KAUST Repository

    Chen, Yuxin

    2016-10-27

    This work describes improvements by algorithmic and architectural means to black-box Bayesian inference over high-dimensional parameter spaces. The well-known adaptive Metropolis (AM) algorithm [H. Haario, E. Saksman, and J. Tamminen, Bernoulli, (2001), pp. 223--242] is extended herein to scale asymptotically uniformly with respect to the underlying parameter dimension for Gaussian targets, by respecting the variance of the target. The resulting algorithm, referred to as the dimension-independent adaptive Metropolis (DIAM) algorithm, also shows improved performance with respect to adaptive Metropolis on non-Gaussian targets. This algorithm is further improved, and the possibility of probing high-dimensional (with dimension $d \\\\geq 1000$) targets is enabled, via GPU-accelerated numerical libraries and periodically synchronized concurrent chains (justified a posteriori). Asymptotically in dimension, this GPU implementation exhibits a factor of four improvement versus a competitive CPU-based Intel MKL (math kernel library) parallel version alone. Strong scaling to concurrent chains is exhibited, through a combination of longer time per sample batch (weak scaling) with fewer necessary samples to convergence. The algorithm performance is illustrated on several Gaussian and non-Gaussian target examples, in which the dimension may be in excess of one thousand.

  6. Massively Parallel Dimension Independent Adaptive Metropolis

    KAUST Repository

    Chen, Yuxin

    2015-05-14

    This work considers black-box Bayesian inference over high-dimensional parameter spaces. The well-known and widely respected adaptive Metropolis (AM) algorithm is extended herein to asymptotically scale uniformly with respect to the underlying parameter dimension, by respecting the variance, for Gaussian targets. The result- ing algorithm, referred to as the dimension-independent adaptive Metropolis (DIAM) algorithm, also shows improved performance with respect to adaptive Metropolis on non-Gaussian targets. This algorithm is further improved, and the possibility of probing high-dimensional targets is enabled, via GPU-accelerated numerical libraries and periodically synchronized concurrent chains (justified a posteriori). Asymptoti- cally in dimension, this massively parallel dimension-independent adaptive Metropolis (MPDIAM) GPU implementation exhibits a factor of four improvement versus the CPU-based Intel MKL version alone, which is itself already a factor of three improve- ment versus the serial version. The scaling to multiple CPUs and GPUs exhibits a form of strong scaling in terms of the time necessary to reach a certain convergence criterion, through a combination of longer time per sample batch (weak scaling) and yet fewer necessary samples to convergence. This is illustrated by e ciently sampling from several Gaussian and non-Gaussian targets for dimension d 1000.

  7. Art meets mathematics in the fourth dimension

    CERN Document Server

    Lipscomb, Stephen Leon

    2014-01-01

    To see objects that live in the fourth dimension we humans would need to add a fourth dimension to our three-dimensional vision. An example of such an object that lives in the fourth dimension is a hyper-sphere or “3-sphere”. The quest to imagine the elusive 3-sphere has deep historical roots: medieval poet Dante Alighieri, in his circa 1300 AD Divine Comedy, used a 3-sphere to convey his allegorical vision of the Christian afterlife. In 1917, Albert Einstein visualized the universe, at each instant in time, as a 3-sphere. He described his representation as “…the place where the reader’s imagination boggles. Nobody can imagine this thing.” Over time, however, our understanding of the concept of dimension evolved. By 2003, a researcher had successfully rendered into human vision the structure of a 4-web (think of an every increasingly-dense spider’s web). In this text Stephen Lipscomb takes his innovative dimension theory research a step further, using the 4-web to reveal a new partial image of a...

  8. 1/ r potential in higher dimensions

    Science.gov (United States)

    Chakraborty, Sumanta; Dadhich, Naresh

    2018-01-01

    In Einstein gravity, gravitational potential goes as 1/r^{d-3} in d non-compactified spacetime dimensions, which assumes the familiar 1 / r form in four dimensions. On the other hand, it goes as 1/r^{α }, with α =(d-2m-1)/m, in pure Lovelock gravity involving only one mth order term of the Lovelock polynomial in the gravitational action. The latter offers a novel possibility of having 1 / r potential for the non-compactified dimension spectrum given by d=3m+1. Thus it turns out that in the two prototype gravitational settings of isolated objects, like black holes and the universe as a whole - cosmological models, the Einstein gravity in four and mth order pure Lovelock gravity in 3m+1 dimensions behave in a similar fashion as far as gravitational interactions are considered. However propagation of gravitational waves (or the number of degrees of freedom) does indeed serve as a discriminator because it has two polarizations only in four dimensions.

  9. Black Holes, Cosmology and Extra Dimensions

    International Nuclear Information System (INIS)

    Frolov, Valeri P

    2013-01-01

    Book review: The book Black holes, Cosmology and Extra Dimensions written by Kirill A Bronnikov and Sergey G Rubin has been published recently by World Scientific Publishing Company. The authors are well known experts in gravity and cosmology. The book is a monograph, a considerable part of which is based on the original work of the authors. Their original point of view on some of the problems makes the book quite interesting, covering a variety of important topics of the modern theory of gravity, astrophysics and cosmology. It consists of 11 chapters which are organized in three parts. The book starts with an introduction, where the authors briefly discuss the main ideas of General Relativity, giving some historical remarks on its development and application to cosmology, and mentioning some more recent subjects such as brane worlds, f (R)−theories and gravity in higher dimensions. Part I of the book is called ‘Gravity’. Chapters two and three are devoted to the Einstein equations and their spherical symmetric black hole solutions. Part II (Cosmology) starts with discussion of the Friedmann–Robertson–Walker and de Sitter solutions of the Einstein equations and their properties. Part III covers the material on extra dimensions. It describes how Einstein gravity is modified in the presence of one or more additional spatial dimensions and how these extra dimensions are compactified in the Kaluza–Klein scheme

  10. Aspects of grand unification in higher dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Wingerter, A.

    2005-07-01

    We consider various aspects of string phenomenology in the context of heterotic orbifold constructions, where special emphasis is laid on the connection between GUT models in extra dimensions and their relation to string theory. We investigate orbifold models with more general structure than the Z{sub 3} orbifold, on which most of the past research had focused. The picture of the heterotic brane world which naturally emerges allows us to make contact to field theoretic orbifold constructions in five and six dimensions, which have recently attracted much attention. We present a classification scheme for inequivalent orbifold models and apply the results to the case of Z{sub 6}-II point group. We develop the mathematical background for a stringy Higgs mechanism which allows us to lower the rank of the gauge group in the higher dimensions, which cannot be achieved by contemporary orbifold constructions. We provide all the calculational methods needed to unambiguously identify the gauge symmetry and to construct the matter representations. For specific model constructions, we focus on two promising gauge groups, namely on SO(10) and E{sub 6}. In the latter case, we derive a GUT model in six dimensions which has a standard model like gauge symmetry SU(3) x SU (2) x U(1) x U(1)' in four dimensions, and discuss its embedding into string theory. (orig.)

  11. 1/r potential in higher dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, Sumanta [Indian Association for the Cultivation of Science, Department of Theoretical Physics, Kolkata (India); IUCAA, Pune (India); Dadhich, Naresh [IUCAA, Pune (India); Center for Theoretical Physics, New Delhi (India)

    2018-01-15

    In Einstein gravity, gravitational potential goes as 1/r{sup d-3} in d non-compactified spacetime dimensions, which assumes the familiar 1/r form in four dimensions. On the other hand, it goes as 1/r{sup α}, with α = (d - 2m - 1)/m, in pure Lovelock gravity involving only one mth order term of the Lovelock polynomial in the gravitational action. The latter offers a novel possibility of having 1/r potential for the non-compactified dimension spectrum given by d = 3m + 1. Thus it turns out that in the two prototype gravitational settings of isolated objects, like black holes and the universe as a whole - cosmological models, the Einstein gravity in four and mth order pure Lovelock gravity in 3m + 1 dimensions behave in a similar fashion as far as gravitational interactions are considered. However propagation of gravitational waves (or the number of degrees of freedom) does indeed serve as a discriminator because it has two polarizations only in four dimensions. (orig.)

  12. Prediction of equibiaxial loading stress in collagen-based extracellular matrix using a three-dimensional unit cell model.

    Science.gov (United States)

    Susilo, Monica E; Bell, Brett J; Roeder, Blayne A; Voytik-Harbin, Sherry L; Kokini, Klod; Nauman, Eric A

    2013-03-01

    Mechanical signals are important factors in determining cell fate. Therefore, insights as to how mechanical signals are transferred between the cell and its surrounding three-dimensional collagen fibril network will provide a basis for designing the optimum extracellular matrix (ECM) microenvironment for tissue regeneration. Previously we described a cellular solid model to predict fibril microstructure-mechanical relationships of reconstituted collagen matrices due to unidirectional loads (Acta Biomater 2010;6:1471-86). The model consisted of representative volume elements made up of an interconnected network of flexible struts. The present study extends this work by adapting the model to account for microstructural anisotropy of the collagen fibrils and a biaxial loading environment. The model was calibrated based on uniaxial tensile data and used to predict the equibiaxial tensile stress-stretch relationship. Modifications to the model significantly improved its predictive capacity for equibiaxial loading data. With a comparable fibril length (model 5.9-8μm, measured 7.5μm) and appropriate fibril anisotropy the anisotropic model provides a better representation of the collagen fibril microstructure. Such models are important tools for tissue engineering because they facilitate prediction of microstructure-mechanical relationships for collagen matrices over a wide range of microstructures and provide a framework for predicting cell-ECM interactions. Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  13. Induction chemotherapy with carboplatin, irinotecan, and paclitaxel followed by high dose three-dimension conformal thoracic radiotherapy (74 Gy) with concurrent carboplatin, paclitaxel, and gefitinib in unresectable stage IIIA and stage IIIB non-small cell lung cancer.

    Science.gov (United States)

    Stinchcombe, Thomas E; Morris, David E; Lee, Carrie B; Moore, Dominic T; Hayes, D Neil; Halle, Jan S; Rivera, M Patricia; Rosenman, Julian G; Socinski, Mark A

    2008-03-01

    Combined modality therapy is a standard therapy for patients with unresectable stage III non-small cell lung cancer (NSCLC). Gefitinib is active in advanced NSCLC, and in preclinical models, it potentiates the activity of radiation therapy. We investigate the tolerability of gefitinib in combined modality therapy in combination with three-dimensional thoracic conformal radiation therapy (3-dimensional TCRT). Stage III patients with a good performance status were treated with induction chemotherapy (carboplatin area under the curve [AUC] of 5, irinotecan 100 mg/m(2), and paclitaxel 175 mg/m(2) days 1 and 22) with pegfilgrastim support followed by concurrent chemotherapy (carboplatin AUC 2, and paclitaxel 45 mg/m(2) weekly) and gefitinib 250 mg daily beginning on day 43 with 3-dimensional TCRT to 74 Gy. Between March 2004 and January 2006, 23 patients received treatment on the trial: median age 62 years (range 44-82), 52% female, 61% stage IIIA, 61% performance status 0, 17% > or =5% weight loss, and 91% underwent positron emission tomography staging. Induction chemotherapy with pegfilgrastim support was well tolerated and active (partial response rate, 24%; stable disease, 76%; and early progression, 0%). Twenty-one patients initiated the concurrent chemoradiation, and 20 patients completed therapy to 74 Gy. The primary toxicities of concurrent chemoradiation were grade 3 esophagitis (19.5%) and cardiac arrhythmia (atrial fibrillation) (9.5%). The median progression-free survival and overall survival were 9 months (95% confidence intervals [CI]: 7-13 months) and 16 months (95% CI: 10-20 months), respectively. Treatment with induction chemotherapy and gefitinib concurrent with 3-dimensional TCRT has an acceptable toxicity and tolerability, but the survival results were disappointing.

  14. Experiential Dimensions of TV-Advertising

    DEFF Research Database (Denmark)

    Andersen, Lars Pynt; Jensen, Jan Møller

    Based on concepts from cognitive film psychology and narrative transportation theory a model of the experiential dimensions of TV–advertising is proposed. With structural equation modeling, it is shown how the ad’s experiential potential relates to Ad-Liking. Findings indicate that Ad-Liking is h......Based on concepts from cognitive film psychology and narrative transportation theory a model of the experiential dimensions of TV–advertising is proposed. With structural equation modeling, it is shown how the ad’s experiential potential relates to Ad-Liking. Findings indicate that Ad......-Liking is highly related to narrative advertising executions, but that the potential appeal of this advertising experience is supported by the ‘gripping’ qualities of a lyrical dimension. It is suggested that the conceptual framework could be developed for pragmatic comparison of TV-spots in tracking or testing....

  15. The "fourth dimension" of gene transcription.

    Science.gov (United States)

    O'Malley, Bert W

    2009-05-01

    The three dimensions of space provide our relationship to position on the earth, but the fourth dimension of time has an equally profound influence on our lives. Everything from light and sound to weather and biology operate on the principle of measurable temporal periodicity. Consequently, a wide variety of time clocks affect all aspects of our existence. The annual (and biannual) cycles of activity, metabolism, and mating, the monthly physiological clocks of women and men, and the 24-h diurnal rhythms of humans are prime examples. Should it be surprising to us that the fourth dimension also impinges upon gene expression and that the genome itself is regulated by the fastest running of all biological clocks? Recent evidence substantiates the existence of such a ubiquitin-dependent transcriptional clock that is based upon the activation and destruction of transcriptional coactivators.

  16. Brane-world motion in compact dimensions

    Science.gov (United States)

    Greene, Brian; Levin, Janna; Parikh, Maulik

    2011-08-01

    The topology of extra dimensions can break global Lorentz invariance, singling out a globally preferred frame even in flat spacetime. Through experiments that probe global topology, an observer can determine her state of motion with respect to the preferred frame. This scenario is realized if we live on a brane universe moving through a flat space with compact extra dimensions. We identify three experimental effects due to the motion of our universe that one could potentially detect using gravitational probes. One of these relates to the peculiar properties of the twin paradox in multiply-connected spacetimes. Another relies on the fact that the Kaluza-Klein modes of any bulk field are sensitive to boundary conditions. A third concerns the modification to the Newtonian potential on a moving brane. Remarkably, we find that even small extra dimensions are detectable by brane observers if the brane is moving sufficiently fast. Communicated by P R L V Moniz

  17. Extremal vacuum black holes in higher dimensions

    International Nuclear Information System (INIS)

    Figueras, Pau; Lucietti, James; Rangamani, Mukund; Kunduri, Hari K.

    2008-01-01

    We consider extremal black hole solutions to the vacuum Einstein equations in dimensions greater than five. We prove that the near-horizon geometry of any such black hole must possess an SO(2,1) symmetry in a special case where one has an enhanced rotational symmetry group. We construct examples of vacuum near-horizon geometries using the extremal Myers-Perry black holes and boosted Myers-Perry strings. The latter lead to near-horizon geometries of black ring topology, which in odd spacetime dimensions have the correct number of rotational symmetries to describe an asymptotically flat black object. We argue that a subset of these correspond to the near-horizon limit of asymptotically flat extremal black rings. Using this identification we provide a conjecture for the exact 'phase diagram' of extremal vacuum black rings with a connected horizon in odd spacetime dimensions greater than five.

  18. Gauged N=8 supergravity in five dimensions

    International Nuclear Information System (INIS)

    Guenaydin, M.; Romans, L.J.; Warner, N.P.

    1985-01-01

    We construct gauged N=8 supergravity theories in five dimensions. Instead of the twenty-seven vector fields of the ungauged theory, the gauged theories contain fifteen vector fields and twelve second-rank antisymmetric tensor fields satisfying self-dual field equations. The fifteen vector fields can be used to gauge any of the fifteen-dimensional semisimple subgroups of SL(6, R), sepcifically SO(p, 6-p) for p=0, 1, 2, 3. The gauged theories also have a physical global SU(1,1) symmetry which survives from the Esub(6(6)) symmetry of the ungauged theory. This SU(1, 1) for the SO(6) gauging is presumably related to that of the chiral N=2 theory in ten dimensions. In our formalism we maintain a composite local USp(8) symmetry analogous to SU(8) in four dimensions. (orig.)

  19. Projective Dimension in Filtrated K-Theory

    DEFF Research Database (Denmark)

    Bentmann, Rasmus Moritz

    2013-01-01

    Under mild assumptions, we characterise modules with projective resolutions of length n∈N in the target category of filtrated K-theory over a finite topological space in terms of two conditions involving certain Tor -groups. We show that the filtrated K-theory of any separable C∗dash-algebra over...... any topological space with at most four points has projective dimension 2 or less. We observe that this implies a universal coefficient theorem for rational equivariant KK-theory over these spaces. As a contrasting example, we find a separable C∗dash-algebra in the bootstrap class over a certain five......-point space, the filtrated K-theory of which has projective dimension 3. Finally, as an application of our investigations, we exhibit Cuntz-Krieger algebras which have projective dimension 2 in filtrated K-theory over their respective primitive spectrum....

  20. Exploring extra dimensions through inflationary tensor modes

    Science.gov (United States)

    Im, Sang Hui; Nilles, Hans Peter; Trautner, Andreas

    2018-03-01

    Predictions of inflationary schemes can be influenced by the presence of extra dimensions. This could be of particular relevance for the spectrum of gravitational waves in models where the extra dimensions provide a brane-world solution to the hierarchy problem. Apart from models of large as well as exponentially warped extra dimensions, we analyze the size of tensor modes in the Linear Dilaton scheme recently revived in the discussion of the "clockwork mechanism". The results are model dependent, significantly enhanced tensor modes on one side and a suppression on the other. In some cases we are led to a scheme of "remote inflation", where the expansion is driven by energies at a hidden brane. In all cases where tensor modes are enhanced, the requirement of perturbativity of gravity leads to a stringent upper limit on the allowed Hubble rate during inflation.