WorldWideScience

Sample records for unit cell dimension

  1. BioDiff - a neutron diffractometer optimized for crystals with large unit cell dimensions

    OpenAIRE

    Schrader, Tobias Erich; Ostermann, Andreas; Monkenbusch, Michael; Laatsch, Bernhard; Jüttner, Philipp; Petry, Winfried; Richter, Dieter

    2014-01-01

    The research reactor Heinz Maier-Leibnitz (FRM II) is a modern high flux neutron source which feeds some 30 state of the art neutron beam instruments. Currently 24 are operational, others in commissioning or under construction. The newly built neutron single crystal diffractometer BIODIFF is especially designed to collect data from crystals with large unit cells. The main field of application is the structural analysis of proteins, especially the determination of hydrogen atom positions. BIOD...

  2. Compiler validates units and dimensions

    Science.gov (United States)

    Levine, F. E.

    1980-01-01

    Software added to compiler for automated test system for Space Shuttle decreases computer run errors by providing offline validation of engineering units used system command programs. Validation procedures are general, though originally written for GOAL, a free-form language that accepts "English-like" statements, and may be adapted to other programming languages.

  3. New dimensions in cell migration

    NARCIS (Netherlands)

    Friedl, P.; Sahai, E.; Weiss, S.; Yamada, K.M.

    2012-01-01

    Studies of cell migration in three-dimensional (3D) cell culture systems and in vivo have revealed several differences when compared with cell migration in two dimensions, including their morphology and mechanical and signalling control. Here, researchers assess the contribution of 3D models to our

  4. Semiempirical and DFT computations of the influence of Tb(III) dopant on unit cell dimensions of cerium(III) fluoride.

    Science.gov (United States)

    Shyichuk, Andrii; Runowski, Marcin; Lis, Stefan; Kaczkowski, Jakub; Jezierski, Andrzej

    2015-01-30

    Several computational methods, both semiempirical and ab initio, were used to study the influence of the amount of dopant on crystal cell dimensions of CeF3 doped with Tb(3+) ions (CeF3 :Tb(3+) ). AM1, RM1, PM3, PM6, and PM7 semiempirical parameterization models were used, while the Sparkle model was used to represent the lanthanide cations in all cases. Ab initio calculations were performed by means of GGA+U/PBE projector augmented wave density functional theory. The computational results agree well with the experimental data. According to both computation and experiment, the crystal cell parameters undergo a linear decrease with increasing amount of the dopant. The computations performed using Sparkle/PM3 and DFT methods resulted in the best agreement with the experiment with the average deviation of about 1% in both cases. Typical Sparkle/PM3 computation on a 2×2×2 supercell of CeF3:Tb3+ lasted about two orders of magnitude shorter than the DFT computation concerning a unit cell of this material. © 2014 Wiley Periodicals, Inc.

  5. Electrical dimensions in cell science.

    Science.gov (United States)

    McCaig, Colin D; Song, Bing; Rajnicek, Ann M

    2009-12-01

    Cells undergo a variety of physiological processes, including division, migration and differentiation, under the influence of endogenous electrical cues, which are generated physiologically and pathologically in the extracellular and sometimes intracellular spaces. These signals are transduced to regulate cell behaviours profoundly, both in vitro and in vivo. Bioelectricity influences cellular processes as fundamental as control of the cell cycle, cell proliferation, cancer-cell migration, electrical signalling in the adult brain, embryonic neuronal cell migration, axon outgrowth, spinal-cord repair, epithelial wound repair, tissue regeneration and establishment of left-right body asymmetry. In addition to direct effects on cells, electrical gradients interact with coexisting extracellular chemical gradients. Indeed, cells can integrate and respond to electrical and chemical cues in combination. This Commentary details how electrical signals control multiple cell behaviours and argues that study of the interplay between combined electrical and chemical gradients is underdeveloped yet necessary.

  6. Conceptual Model of Quantities, Units, Dimensions, and Values

    Science.gov (United States)

    Rouquette, Nicolas F.; DeKoenig, Hans-Peter; Burkhart, Roger; Espinoza, Huascar

    2011-01-01

    JPL collaborated with experts from industry and other organizations to develop a conceptual model of quantities, units, dimensions, and values based on the current work of the ISO 80000 committee revising the International System of Units & Quantities based on the International Vocabulary of Metrology (VIM). By providing support for ISO 80000 in SysML via the International Vocabulary of Metrology (VIM), this conceptual model provides, for the first time, a standard-based approach for addressing issues of unit coherence and dimensional analysis into the practice of systems engineering with SysML-based tools. This conceptual model provides support for two kinds of analyses specified in the International Vocabulary of Metrology (VIM): coherence of units as well as of systems of units, and dimension analysis of systems of quantities. To provide a solid and stable foundation, the model for defining quantities, units, dimensions, and values in SysML is explicitly based on the concepts defined in VIM. At the same time, the model library is designed in such a way that extensions to the ISQ (International System of Quantities) and SI Units (Systeme International d Unites) can be represented, as well as any alternative systems of quantities and units. The model library can be used to support SysML user models in various ways. A simple approach is to define and document libraries of reusable systems of units and quantities for reuse across multiple projects, and to link units and quantity kinds from these libraries to Unit and QuantityKind stereotypes defined in SysML user models.

  7. Grandeurs, dimensions, et conversions d'unités Quantities, Dimensions and Units Conversions

    Directory of Open Access Journals (Sweden)

    Bronner C.

    2006-11-01

    Full Text Available Il n'est plus besoin de démontrer que le Système International d'Unités (SI est un fait. Il est normalement enseigné dans les lycées et universités. Les scientifiques l'utilisent systématiquement dans leurs publications; les nouveaux livres et banques de données s'en servent couramment. Cependant, certaines industries (la pétrolière entre autres continuent à se servir de systèmes techniques. On trouve dans des archives de vieilles données ou des spécifications d'usines qui ont été faites dans d'autres systèmes. Il n'est pas rare, dans la vie professionnelle, de rencontrer un problème où une unité doit être transformée. Cet article souhaite aider les personnes qui doivent résoudre ce genre d'écueil en leur présentant une vision globale des différents systèmes d'unités qui ont historiquement existé. Une définition des unités, soit traditionnelles, soit étranges, accompagne également l'article. L'aide la plus importante sera sans doute trouvée dans le programme inclus dans une disquette. Un logiciel complet, sous Windows, permettra à quiconque de résoudre, sans erreur, son problème de conversion d'unité. La technique de conversion, basée sur l'utilisation du calcul dimensionnel, et utilisée dans le programme, est également expliquée. It is not longer necessary to prove that the International System of Units (SI is a fact. It is normally used in schools and universities. Scientists systematically use SI in their publications. New books and databases are commonly built on it. Meanwhile, some industries (oil companies among others keep on using technical systems. It is possible to find old data and plant designs that use other systems. It is not uncommon, in professional life, to find a problem in which units need to be transformed. This article aims to help people who have to solve this kind of difficulty, by giving an overview of the different unit systems. A description of traditional and unusual units is

  8. Bi-Cell Unit for Fuel Cell.

    Science.gov (United States)

    The patent concerns a bi-cell unit for a fuel cell . The bi-cell unit is comprised of two electrode packs. Each of the electrode packs includes an...invention relates in general to a bi-cell unit for a fuel cell and in particular, to a bi-cell unit for a hydrazine-air fuel cell .

  9. Measurement Units and Physical Dimensions of Fractance-Part II: Fractional-Order Measurement Units and Physical Dimensions of Fractance and Rules for Fractors in Series and Parallel

    National Research Council Canada - National Science Library

    Pu, Yi-Fei

    2016-01-01

    Here and in the companion paper (Part I), a novel conceptual framework on the measurement units and physical dimensions of fractance and rules for fractors in series and parallel is mainly discussed...

  10. Sickle Cell Unit.

    Science.gov (United States)

    Canipe, Stephen L.

    Included in this high school biology unit on sickle cell anemia are the following materials: a synopsis of the history of the discovery and the genetic qualities of the disease; electrophoresis diagrams comparing normal, homozygous and heterozygous conditions of the disease; and biochemical characteristics and population genetics of the disease. A…

  11. The Rokhlin property vs. Rokhlin dimension 1 on unital Kirchberg algebras

    DEFF Research Database (Denmark)

    Barlak, S.; Enders, Dominic; Matui, H.;

    2015-01-01

    We investigate outer symmetries on unital Kirchberg algebras with respect to the Rokhlin property and finite Rokhlin dimension. In stark contrast to the restrictiveness of the Rokhlin property, every such action has Rokhlin dimension at most one. A consequence of these observations is a relations......We investigate outer symmetries on unital Kirchberg algebras with respect to the Rokhlin property and finite Rokhlin dimension. In stark contrast to the restrictiveness of the Rokhlin property, every such action has Rokhlin dimension at most one. A consequence of these observations...... is a relationship between the nuclear dimension of an $\\mathcal O_\\infty$-absorbing C*-algebra and its $\\mathcal O_2$-stabilization. We also give a more direct and alternative approach to this result. Several applications of this relationship are discussed to cover a fairly large class of $\\mathcal O......_\\infty$-absorbing C*-algebras that turn out to have finite nuclear dimension...

  12. The Rokhlin property vs. Rokhlin dimension 1 on unital Kirchberg algebras

    DEFF Research Database (Denmark)

    Barlak, S.; Enders, Dominic; Matui, H.

    2015-01-01

    We investigate outer symmetries on unital Kirchberg algebras with respect to the Rokhlin property and finite Rokhlin dimension. In stark contrast to the restrictiveness of the Rokhlin property, every such action has Rokhlin dimension at most one. A consequence of these observations is a relations...

  13. Voronoi cells, fractal dimensions and fibre composites.

    Science.gov (United States)

    Summerscales, J.; Guild, F. J.; Pearce, N. R. L.; Russell, P. M.

    2001-02-01

    The use of fibre-reinforced polymer matrix composite materials is growing at a faster rate than the gross domestic product (GDP) in many countries. An improved understanding of their processing and mechanical behaviour would extend the potential applications of these materials. For unidirectional composites, it is predicted that localized absence of fibres is related to longitudinal compression failure. The use of woven reinforcements permits more effective manufacture than for unidirectional fibres. It has been demonstrated experimentally that compression strengths of woven composites are reduced when fibres are clustered. Summerscales predicted that clustering of fibres would increase the permeability of the reinforcement and hence expedite the processing of these materials. Commercial fabrics are available which employ this concept using flow-enhancing bound tows. The net effect of clustering fibres is to enhance processability whilst reducing the mechanical properties. The effects reported above were qualitative correlations. To improve the design tools for reinforcement fabrics we have sought to quantify the changes in the micro/meso-structure of woven reinforcement fabrics. Gross differences in the appearance of laminate sections are apparent for different weave styles. The use of automated image analysis is essential for the quantification of subtle changes in fabric architecture. This paper considers Voronoi tessellation and fractal dimensions for the quantification of the microstructures of woven fibre-reinforced composites. It reviews our studies in the last decade of the process-property-structure relationships for commercial and experimental fabric reinforcements in an attempt to resolve the processing vs. properties dilemma. A new flow-enhancement concept has been developed which has a reduced impact on laminate mechanical properties.

  14. Cancer Detection via Determination of Fractal Cell Dimension

    CERN Document Server

    Bauer, W; Bauer, Wolfgang; Mackenzie, Charles D.

    1995-01-01

    We utilize the fractal dimension of the perimeter surface of cell sections as a new observable to characterize cells of different types. We propose that it is possible to distinguish cancerous from healthy cells with the aid of this new approach. As a first application we show that it is possible to perform this distinction between patients with hairy-cell lymphocytic leukemia and those with normal blood lymphocytes.

  15. Phenotypic Dimensions of Spirituality: Implications for Mental Health in China, India, and the United States

    Directory of Open Access Journals (Sweden)

    Clayton Hoi-Yun McClintock

    2016-10-01

    Full Text Available While the field of empirical study on religion and spirituality in relation to mental health has rapidly expanded over the past decade, little is known about underlying dimensions of spirituality cross-culturally conceived. We aimed to bridge this gap by inductively deriving potential universal dimensions of spirituality through a large-scale, multi-national data collection and examining the relationships of these dimensions with common psychiatric conditions. Five-thousand five-hundred twelve participants from China, India, and the United States completed a two-hour online survey consisting of wide-ranging measures of the lived experience of spirituality, as well as clinical assessments. A series of inductive Exploratory Factor Analysis (EFA and cross-validating Exploratory Structural Equation Modeling (ESEM were conducted to derive common underlying dimensions of spirituality. Logistic regression analyses were then conducted with each dimension to predict depression, suicidal ideation, generalized anxiety, and substance-related disorders. Preliminary EFA results were consistently supported by ESEM findings. Analyses of forty spirituality measures revealed five invariant factors across countries which were interpreted as five dimensions of universal spiritual experience, specifically: love, in the fabric of relationships and as a sacred reality; unifying interconnectedness, as a sense of energetic oneness with other beings in the universe; altruism, as a commitment beyond the self with care and service; contemplative practice, such as meditation, prayer, yoga, or qigong; and religious and spiritual reflection and commitment, as a life well-examined. Love, interconnectedness, and altruism were associated with less risk of psychopathology for all countries. Religious and spiritual reflection and commitment and contemplative practice were associated with less risk in India and the United States but associated with greater risk in China. Education

  16. Phenotypic Dimensions of Spirituality: Implications for Mental Health in China, India, and the United States

    Science.gov (United States)

    McClintock, Clayton H.; Lau, Elsa; Miller, Lisa

    2016-01-01

    While the field of empirical study on religion and spirituality in relation to mental health has rapidly expanded over the past decade, little is known about underlying dimensions of spirituality cross-culturally conceived. We aimed to bridge this gap by inductively deriving potential universal dimensions of spirituality through a large-scale, multi-national data collection, and examining the relationships of these dimensions with common psychiatric conditions. Five-thousand five-hundred and twelve participants from China, India, and the United States completed a two-hour online survey consisting of wide-ranging measures of the lived experience of spirituality, as well as clinical assessments. A series of inductive Exploratory Factor Analysis (EFA) and cross-validating Exploratory Structural Equation Modeling (ESEM) were conducted to derive common underlying dimensions of spirituality. Logistic regression analyses were then conducted with each dimension to predict depression, suicidal ideation, generalized anxiety, and substance-related disorders. Preliminary EFA results were consistently supported by ESEM findings. Analyses of 40 spirituality measures revealed five invariant factors across countries which were interpreted as five dimensions of universal spiritual experience, specifically: love, in the fabric of relationships and as a sacred reality; unifying interconnectedness, as a sense of energetic oneness with other beings in the universe; altruism, as a commitment beyond the self with care and service; contemplative practice, such as meditation, prayer, yoga, or qigong; and religious and spiritual reflection and commitment, as a life well-examined. Love, interconnectedness, and altruism were associated with less risk of psychopathology for all countries. Religious and spiritual reflection and commitment and contemplative practice were associated with less risk in India and the United States but associated with greater risk in China. Education was directly

  17. Phenotypic Dimensions of Spirituality: Implications for Mental Health in China, India, and the United States.

    Science.gov (United States)

    McClintock, Clayton H; Lau, Elsa; Miller, Lisa

    2016-01-01

    While the field of empirical study on religion and spirituality in relation to mental health has rapidly expanded over the past decade, little is known about underlying dimensions of spirituality cross-culturally conceived. We aimed to bridge this gap by inductively deriving potential universal dimensions of spirituality through a large-scale, multi-national data collection, and examining the relationships of these dimensions with common psychiatric conditions. Five-thousand five-hundred and twelve participants from China, India, and the United States completed a two-hour online survey consisting of wide-ranging measures of the lived experience of spirituality, as well as clinical assessments. A series of inductive Exploratory Factor Analysis (EFA) and cross-validating Exploratory Structural Equation Modeling (ESEM) were conducted to derive common underlying dimensions of spirituality. Logistic regression analyses were then conducted with each dimension to predict depression, suicidal ideation, generalized anxiety, and substance-related disorders. Preliminary EFA results were consistently supported by ESEM findings. Analyses of 40 spirituality measures revealed five invariant factors across countries which were interpreted as five dimensions of universal spiritual experience, specifically: love, in the fabric of relationships and as a sacred reality; unifying interconnectedness, as a sense of energetic oneness with other beings in the universe; altruism, as a commitment beyond the self with care and service; contemplative practice, such as meditation, prayer, yoga, or qigong; and religious and spiritual reflection and commitment, as a life well-examined. Love, interconnectedness, and altruism were associated with less risk of psychopathology for all countries. Religious and spiritual reflection and commitment and contemplative practice were associated with less risk in India and the United States but associated with greater risk in China. Education was directly

  18. Sociocultural dimension of parents of premature infants discharged from a neonatal intensive care unit

    Directory of Open Access Journals (Sweden)

    Isis Vanessa Nazareth

    2014-10-01

    Full Text Available This study aimed at identifying and analyzing the social and cultural dimensions of parents of premature infants discharged from neonatal intensive care units. It is a qualitative and descriptive study, based on ethno-nursing and in the Theory of Diversity and Universality Cultural Care with 12 participants. The setting was a university hospital in the city of Rio de Janeiro, RJ, Brazil. Data collection occurred between November, 2012 and April, 2013, through a social economic and cultural questionnaire and from the observation, participation and reflection. The analysis based on ethno-nursing and on the use of Atlas-ti software allowed to find the analytical category: the sociocultural structure of parents of premature infants discharged from a neonatal intensive care unit. Results should be used to promote a culturally relevant care and respecting the popular knowledge of parents while taking care of the children discharged from neonatal intensive care units.

  19. Thinking Copenhagen: The Cognitive Dimension of Climate Change Policy Making In Brazil and the United States

    Directory of Open Access Journals (Sweden)

    Mark S. Langevin

    2009-12-01

    Full Text Available This article explores the cognitive dimension of climate change policy making in Brazil and the United States as both countries prepare for the Conference of the Parties to the United Nations Framework Convention on Climate Change or COP15 in Copenhagen. The comparative policy analysis is framed by Putnam (1988 and informed by Bazerman (2009, but adapted to explore the cognitive expressions of policymaking through investigation of public opinion, newspaper coverage, and policymaker statements. The analysis reveals key differences in the ways that Brazilian and U.S. citizens, journalists, and policymakers understand global warming and climate change and think through the policy alternatives for addressing this global challenge through national policy and international negotiations. Brazil’s cognitive dimension provides its negotiators with a wide range of strategic positions, allowing this country to play the role of dealmaker. The U.S. administration arrives at Copenhagen with a narrow win-set, limited by the discordant and divisive cognitive expressions that surround policymaking. These differences limit bilateral cooperation and complicate the COP15 negotiations.

  20. Two-dimension tissue growth model based on circular granular cells for cells with small overlap

    CERN Document Server

    Viridi, Sparisoma; Aprianti, Devi; Haris, Luman; Haryanto, Freddy

    2014-01-01

    Tissue growth can be modeled in two dimension by only using circular granular cells, which can grow and produce child. Linear spring-dashpot model is used to bind the cells with a cut-off interaction range of 1.1 times sum of radii of interacted cells. Simulation steps must be divided into explicit and implicit ones due to cell growing stage and cell position rearrangement. This division is aimed to avoid simulation problem. Only in the explicit steps time changes is performed. Large cells overlap is chosen as termination condition of tissue growth. Only some cells configuration can growth to infinite time without encountering the large cells overlap. These configurations, and the other also, are presented in this work.

  1. Unit: Cells, Inspection Set, National Trial Print.

    Science.gov (United States)

    Australian Science Education Project, Toorak, Victoria.

    This trial version of a unit is the series being produced by the Australian Science Education Project provides instructions for students to prepare a variety of cell types and examine them with microscopes. It also gives some information about the variety and function of cells. The core of the unit, which all students are expected to complete,…

  2. Crossing barriers: the new dimension of 2D cell migration assays.

    NARCIS (Netherlands)

    Horssen, R. van; Hagen, T.L.M. ten

    2011-01-01

    In our body cells move in three dimensions, embedded in an extracellular matrix that varies in composition, density and stiffness, and this movement is fundamental to life. Next to 3D cell migration assays, representing these physiological circumstances, still we need 2D migrations assays to perform

  3. Phase transitions in tumor growth: IV relationship between metabolic rate and fractal dimension of human tumor cells

    Science.gov (United States)

    Betancourt-Mar, J. A.; Llanos-Pérez, J. A.; Cocho, G.; Mansilla, R.; Martin, R. R.; Montero, S.; Nieto-Villar, J. M.

    2017-05-01

    By the use of thermodynamics formalism of irreversible processes, complex systems theory and systems biology, it is derived a relationship between the production of entropy per unit time, the fractal dimension and the tumor growth rate for human tumors cells. The thermodynamics framework developed demonstrates that, the dissipation function is a Landau potential and also the Lyapunov function of the dynamical behavior of tumor growth, which indicate the directional character, stability and robustness of the phenomenon. The entropy production rate may be used as a quantitative index of the metastatic potential of tumors. The current theoretical framework will hopefully provide a better understanding of cancer and contribute to improvements in cancer treatment.

  4. Tumor cells diagnostic through fractal dimensions; Diagnostico de celulas tumorais atraves de dimensoes fractais

    Energy Technology Data Exchange (ETDEWEB)

    Timbo, Christiano dos Santos

    2004-07-01

    This method relies on the application of an algorithm for the quantitative and statistic differentiation of a sample of cells stricken by a certain kind of pathology and a sample of healthy cells. This differentiation is made by applying the principles of fractal dimension to digital images of the cells. The algorithm was developed using the the concepts of Object- Oriented Programming, resulting in a simple code, divided in 5 distinct procedures, and a user-friendly interface. To obtain the fractal dimension of the images of the cells, the program processes the image, extracting its border, and uses it to characterize the complexity of the form of the cell in a quantitative way. In order to validate the code, it was used a digitalized image found in an article by W. Bauer, developer of an analog method. The result showed a difference of 6% between the value obtained by Bauer and the value obtained the algorithm developed in this work. (author)

  5. Unit Manning System: Human Dimensions Field Evaluation of the COHORT company Replacement Model

    Science.gov (United States)

    1994-04-18

    tha: their superiors make such an attempt. Whether we speak of "unit cohesion" (Henderson, 1985; Johns, 1984), "unit morale" (Gal, 1986), "combat...differences. Generally speaking , mean differences on the five point scales must now be in the .4 to .5 range instead of the .2 to .3 range in order to...Marlowe, et al., 1985). Training in basic skiils , along with the maintenance of barracks standards and physical readiness, were all areas where COHORT

  6. The dimensions of the policy debate over transportation energy: The case of hydrogen in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Collantes, Gustavo [Institute of Transportation Studies, University of California at Davis, One Shields Avenue, Davis, CA 95616 (United States); Kennedy School of Government, Harvard University, 79 JFK Street, Cambridge, MA 02138 (United States)

    2008-03-15

    Environmental and politico-strategic concerns have driven the increase in policy activity related to energy that the United States witnessed in the last few years. The nature of the issues at stake and the level of stakeholder involvement result in a highly complex policy debate. The broad concern of this paper is the study of this energy-policy process and the identification of the main policy issues. Specifically, multivariate analysis is applied to data on a wide variety of stakeholders' policy beliefs and policy preferences to identify the policy dimensions that characterize the debate over energy policy in the United States. The focus is on the policy debate over hydrogen as a transportation fuel, although many results are applicable to the debate over transportation energy at large. The analysis uses a dataset of 502 individuals from 323 different stakeholder organizations obtained via a web-based survey specifically designed for this study. (author)

  7. Reversible (unitized) PEM fuel cell devices

    Energy Technology Data Exchange (ETDEWEB)

    Mitlitsky, F; Myers, B; Smith, W F; Weisberg, Molter, T M

    1999-06-01

    Regenerative fuel cells (RFCs) are enabling for many weight-critical portable applications, since the packaged specific energy (>400 Wh/kg) of properly designed lightweight RFC systems is several-fold higher than that of the lightest weight rechargeable batteries. RFC systems can be rapidly refueled (like primary fuel cells), or can be electrically recharged (like secondary batteries) if a refueling infrastructure is not conveniently available. Higher energy capacity systems with higher performance, reduced weight, and freedom from fueling infrastructure are the features that RFCs promise for portable applications. Reversible proton exchange membrane (PEM) fuel cells, also known as unitized regenerative fuel cells (URFCs), or reversible regenerative fuel cells, are RFC systems which use reversible PEM cells, where each cell is capable of operating both as a fuel cell and as an electrolyzer. URFCs further economize portable device weight, volume, and complexity by combining the functions of fuel cells and electrolyzers in the same hardware, generally without any system performance or efficiency reduction. URFCs are being made in many forms, some of which are already small enough to be portable. Lawrence Livermore National Laboratory (LLNL) has worked with industrial partners to design, develop, and demonstrate high performance and high cycle life URFC systems. LLNL is also working with industrial partners to develop breakthroughs in lightweight pressure vessels that are necessary for URFC systems to achieve the specific energy advantages over rechargeable batteries. Proton Energy Systems, Inc. (Proton) is concurrently developing and commercializing URFC systems (UNIGEN' product line), in addition to PEM electrolyzer systems (HOGEN' product line), and primary PEM fuel cell systems. LLNL is constructing demonstration URFC units in order to persuade potential sponsors, often in their own conference rooms, that advanced applications based on URFC s are

  8. Sexual Trafficking in the United States: A Domestic Problem with Transnational Dimensions

    Science.gov (United States)

    Hodge, David R.

    2008-01-01

    The trafficking of young women and children for prostitution and other forms of sexual exploitation is one of the most significant human rights abuses in contemporary society. In keeping with the social work profession's commitment to social justice, this article examines the issue of sexual trafficking in the United States. The transnational…

  9. Sexual Trafficking in the United States: A Domestic Problem with Transnational Dimensions

    Science.gov (United States)

    Hodge, David R.

    2008-01-01

    The trafficking of young women and children for prostitution and other forms of sexual exploitation is one of the most significant human rights abuses in contemporary society. In keeping with the social work profession's commitment to social justice, this article examines the issue of sexual trafficking in the United States. The transnational…

  10. Tension and Elasticity Contribute to Fibroblast Cell Shape in Three Dimensions.

    Science.gov (United States)

    Brand, Christoph A; Linke, Marco; Weißenbruch, Kai; Richter, Benjamin; Bastmeyer, Martin; Schwarz, Ulrich S

    2017-08-22

    The shape of animal cells is an important regulator for many essential processes such as cell migration or division. It is strongly determined by the organization of the actin cytoskeleton, which is also the main regulator of cell forces. Quantitative analysis of cell shape helps to reveal the physical processes underlying cell shape and forces, but it is notoriously difficult to conduct it in three dimensions. Here we use direct laser writing to create 3D open scaffolds for adhesion of connective tissue cells through well-defined adhesion platforms. Due to actomyosin contractility in the cell contour, characteristic invaginations lined by actin bundles form between adjacent adhesion sites. Using quantitative image processing and mathematical modeling, we demonstrate that the resulting shapes are determined not only by contractility, but also by elastic stress in the peripheral actin bundles. In this way, cells can generate higher forces than through contractility alone. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  11. A New Type of Great Power Relationship Between the United States and China: The Military Dimension

    Science.gov (United States)

    2014-09-01

    Philippines, and Thailand ). Toward this purpose, the Army’s Foreign Area Offi- cers program has particular utility in that it produces means by which local...Journal, June 10, 2013. The United Nations World Tourism Organization figures showed that at a collective $102 bil- lion in 2012, Chinese tourists...Shanghai Syndrome,” The Straits Times, November 11, 2013. 18. Despite all the statistics concerning rising anger about cor- ruption, unfair land

  12. Three-dimensional single-particle tracking in live cells: news from the third dimension

    Science.gov (United States)

    Dupont, A.; Gorelashvili, M.; Schüller, V.; Wehnekamp, F.; Arcizet, D.; Katayama, Y.; Lamb, D. C.; Heinrich, D.

    2013-07-01

    Single-particle tracking (SPT) is of growing importance in the biophysical community. It is used to investigate processes such as drug and gene delivery, viral uptake, intracellular trafficking or membrane-bound protein mobility. Traditionally, SPT is performed in two dimensions (2D) because of its technical simplicity. However, life occurs in three dimensions (3D) and many methods have been recently developed to track particles in 3D. Now, is the third dimension worth the effort? Here we investigate the differences between the 2D and 3D analyses of intracellular transport with the 3D development of a time-resolved mean square displacement (MSD) analysis introduced previously. The 3D trajectories, and the 2D projections, of fluorescent nanoparticles were obtained with an orbital tracking microscope in two different cell types: in Dictyostelium discoideum ameba and in adherent, more flattened HuH-7 human cells. As expected from the different 3D organization of both cells’ cytoskeletons, a third of the active transport was lost upon projection in the ameba whereas the identification of the active phases was barely affected in the HuH-7 cells. In both cell types, we found intracellular diffusion to be anisotropic and the diffusion coefficient values derived from the 2D analysis were therefore biased.

  13. Structured Ordinary Least Squares: A Sufficient Dimension Reduction approach for regressions with partitioned predictors and heterogeneous units.

    Science.gov (United States)

    Liu, Yang; Chiaromonte, Francesca; Li, Bing

    2017-06-01

    In many scientific and engineering fields, advanced experimental and computing technologies are producing data that are not just high dimensional, but also internally structured. For instance, statistical units may have heterogeneous origins from distinct studies or subpopulations, and features may be naturally partitioned based on experimental platforms generating them, or on information available about their roles in a given phenomenon. In a regression analysis, exploiting this known structure in the predictor dimension reduction stage that precedes modeling can be an effective way to integrate diverse data. To pursue this, we propose a novel Sufficient Dimension Reduction (SDR) approach that we call structured Ordinary Least Squares (sOLS). This combines ideas from existing SDR literature to merge reductions performed within groups of samples and/or predictors. In particular, it leads to a version of OLS for grouped predictors that requires far less computation than recently proposed groupwise SDR procedures, and provides an informal yet effective variable selection tool in these settings. We demonstrate the performance of sOLS by simulation and present a first application to genomic data. The R package "sSDR," publicly available on CRAN, includes all procedures necessary to implement the sOLS approach. © 2016, The International Biometric Society.

  14. Wood dimensions and value in the Austrian pine plantations in Forest Estate "Sombor"-Forest Unit "Subotica"

    Directory of Open Access Journals (Sweden)

    Ranković Nenad

    2011-01-01

    Full Text Available The relationship and interaction between quantitative (number and dimensions of trees and value indicators in Austrian pine plantations were researched in Forest Management Unit „Subotičke Šume” (Forest Estate „Sombor” - FA „Subotica”. As the measurement of quantitative elements is more simple, their effect on wood value can be used as a rather reliable support in the value estimation of standing trees. The analysis of the research results shows that there is a strong inter-relationship of the study elements, so they can be a good foundation for the estimation of standing timber value in artificial Austrian pine plantations at the given site.

  15. Mathematical Description with Fractals Dimensions of Normal Cells and Cytological Abnormality's of Uterine Neck

    Directory of Open Access Journals (Sweden)

    Javier Rodríguez

    2006-12-01

    Full Text Available Introduction. The fractal geometry has shownto be adapted in the mathematical description ofirregular objects; this measurement has denominatedfractal dimension. The application of thefractal analysis to measure the contours of thenormal cells as well as those that present sometype of abnormality, has shown the possibility of mathematical characterization of itsirregularity. Objectives. To measure, from thefractal geometry cells of the squamous epitheliumof uterine neck classified like normal,atypical squamous cells of undetermined significance(ASC-US and Low Grade IntraepitelialLesion (L-SIL, diagnosed by means of microscopicobservation, in search of mathematicalmeasurements that distinguish them. Methodology.This is an exploratory descriptive studyin which the fractal dimensions were calculated,with the simplified and the conventional boxcounting method, of the cellular and nuclearcontours of 13 normal and with abnormalitiescells of the scaly epithelium of uterine neck likeASC-US and L-SIL, from digital photographiesof 7 normal cells, 2 ASC-US and 4 L-SIL diagnosedwith cytomorphologic criteria by meansof microscopic conventional observation. Results.There developed a quantitative, objective and reproduciblemeasurement of the degree of irregularityin the cells of the scaly epithelium of uterineneck identified microscopically like normal, ASCUSy LEI BG. Conclusions an fractal organizationwas demonstrated in the cellular normal architecture,as well as in cells ASC-US and the injuriesintraepiteliales of low degree L-SIL. They did notfind differences between the cellular studied types.

  16. Delimiting Maximal Kissing Configurations in Four Dimensions

    CERN Document Server

    Altschuler, Eric Lewin

    2013-01-01

    How many unit $n-$dimensional spheres can simultaneously touch or kiss a central $n-$dimensional unit sphere? Beyond mathematics this question has implications for fields such as cryptography and the structure of biologic and chemical macromolecules. The kissing number is only known for dimensions 1-4, 8 and 24 (2, 6, 12, 24, 240, 19650, respectively) and only particularly obvious for dimensions one and two. Indeed, in four dimensions it is not even known if Platonic polytope unique to that dimension known as the 24-cell is the unique kissing configuration. We have not been able to prove that the 24-cell is unique, but, using a physical approach utilizing the hopf map from four to three dimensions, we for the first time delimit the possible other configurations which could be kissing in four dimensions.

  17. Scalable Production of Glioblastoma Tumor-initiating Cells in 3 Dimension Thermoreversible Hydrogels

    Science.gov (United States)

    Li, Qiang; Lin, Haishuang; Wang, Ou; Qiu, Xuefeng; Kidambi, Srivatsan; Deleyrolle, Loic P.; Reynolds, Brent A.; Lei, Yuguo

    2016-08-01

    There is growing interest in developing drugs that specifically target glioblastoma tumor-initiating cells (TICs). Current cell culture methods, however, cannot cost-effectively produce the large numbers of glioblastoma TICs required for drug discovery and development. In this paper we report a new method that encapsulates patient-derived primary glioblastoma TICs and grows them in 3 dimension thermoreversible hydrogels. Our method allows long-term culture (~50 days, 10 passages tested, accumulative ~>1010-fold expansion) with both high growth rate (~20-fold expansion/7 days) and high volumetric yield (~2.0 × 107 cells/ml) without the loss of stemness. The scalable method can be used to produce sufficient, affordable glioblastoma TICs for drug discovery.

  18. Study of plasma meniscus and beam halo in negative ion sources using three dimension in real space and three dimension in velocity space particle in cell model

    Energy Technology Data Exchange (ETDEWEB)

    Nishioka, S., E-mail: nishioka@ppl.appi.keio.ac.jp; Goto, I.; Hatayama, A. [Graduate School of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522 (Japan); Miyamoto, K. [School of Natural and Living Sciences Education, Naruto University of Education, 748 Nakashima, Takashima, Naruto-cho, Naruto-shi, Tokushima 772-8502 (Japan); Okuda, S.; Fukano, A. [Toshiba, 33 Isogo-chou, Isogo-ku, Yokohama-shi, Kanagawa 235-001 (Japan)

    2014-02-15

    Our previous study by two dimension in real space and three dimension in velocity space-particle in cell model shows that the curvature of the plasma meniscus causes the beam halo in the negative ion sources. The negative ions extracted from the periphery of the meniscus are over-focused in the extractor due to the electrostatic lens effect, and consequently become the beam halo. The purpose of this study is to verify this mechanism with the full 3D model. It is shown that the above mechanism is essentially unchanged even in the 3D model, while the fraction of the beam halo is significantly reduced to 6%. This value reasonably agrees with the experimental result.

  19. Time scale and dimension analysis of a budding yeast cell cycle model

    Directory of Open Access Journals (Sweden)

    Novák Béla

    2006-11-01

    Full Text Available Abstract Background The progress through the eukaryotic cell division cycle is driven by an underlying molecular regulatory network. Cell cycle progression can be considered as a series of irreversible transitions from one steady state to another in the correct order. Although this view has been put forward some time ago, it has not been quantitatively proven yet. Bifurcation analysis of a model for the budding yeast cell cycle has identified only two different steady states (one for G1 and one for mitosis using cell mass as a bifurcation parameter. By analyzing the same model, using different methods of dynamical systems theory, we provide evidence for transitions among several different steady states during the budding yeast cell cycle. Results By calculating the eigenvalues of the Jacobian of kinetic differential equations we have determined the stability of the cell cycle trajectories of the Chen model. Based on the sign of the real part of the eigenvalues, the cell cycle can be divided into excitation and relaxation periods. During an excitation period, the cell cycle control system leaves a formerly stable steady state and, accordingly, excitation periods can be associated with irreversible cell cycle transitions like START, entry into mitosis and exit from mitosis. During relaxation periods, the control system asymptotically approaches the new steady state. We also show that the dynamical dimension of the Chen's model fluctuates by increasing during excitation periods followed by decrease during relaxation periods. In each relaxation period the dynamical dimension of the model drops to one, indicating a period where kinetic processes are in steady state and all concentration changes are driven by the increase of cytoplasmic growth. Conclusion We apply two numerical methods, which have not been used to analyze biological control systems. These methods are more sensitive than the bifurcation analysis used before because they identify those

  20. Frequency Selective Surfaces with Nanoparticles Unit Cell

    Directory of Open Access Journals (Sweden)

    Nga Hung Poon

    2015-09-01

    Full Text Available The frequency selective surface (FSS is a periodic structure with filtering performance for optical and microwave signals. The general periodic arrays made with patterned metallic elements can act as an aperture or patch on a substrate. In this work, two kinds of materials were used to produce unit cells with various patterns. Gold nanoparticles of 25 nm diameter were used to form periodic monolayer arrays by a confined photocatalytic oxidation-based surface modification method. As the other material, silver gel was used to create multiple layers of silver. Due to the ultra-thin nature of the self-assembled gold nanoparticle monolayer, it is very easy to penetrate the FSS with terahertz radiation. However, the isolated silver islands made from silver gel form thicker multiple layers and contribute to much higher reflectance. This work demonstrated that multiple silver layers are more suitable than gold nanoparticles for use in the fabrication of FSS structures.

  1. Motor unit firing rates and synchronisation affect the fractal dimension of simulated surface electromyogram during isometric/isotonic contraction of vastus lateralis muscle.

    Science.gov (United States)

    Mesin, Luca; Dardanello, Davide; Rainoldi, Alberto; Boccia, Gennaro

    2016-12-01

    During fatiguing contractions, many adjustments in motor units behaviour occur: decrease in muscle fibre conduction velocity; increase in motor units synchronisation; modulation of motor units firing rate; increase in variability of motor units inter-spike interval. We simulated the influence of all these adjustments on synthetic EMG signals in isometric/isotonic conditions. The fractal dimension of the EMG signal was found mainly influenced by motor units firing behaviour, being affected by both firing rate and synchronisation level, and least affected by muscle fibre conduction velocity. None of the calculated EMG indices was able to discriminate between firing rate and motor units synchronisation. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

  2. Can One Take the Logarithm or the Sine of a Dimensioned Quantity or a Unit? Dimensional Analysis Involving Transcendental Functions

    Science.gov (United States)

    Matta, Cherif F.; Massa, Lou; Gubskaya, Anna V.; Knoll, Eva

    2011-01-01

    The fate of dimensions of dimensioned quantities that are inserted into the argument of transcendental functions such as logarithms, exponentiation, trigonometric, and hyperbolic functions is discussed. Emphasis is placed on common misconceptions that are not often systematically examined in undergraduate courses of physical sciences. The argument…

  3. Lithium-Ion Cell Charge-Control Unit Developed

    Science.gov (United States)

    Reid, Concha M.; Manzo, Michelle A.; Buton, Robert M.; Gemeiner, Russel

    2005-01-01

    A lithium-ion (Li-ion) cell charge-control unit was developed as part of a Li-ion cell verification program. This unit manages the complex charging scheme that is required when Li-ion cells are charged in series. It enables researchers to test cells together as a pack, while allowing each cell to charge individually. This allows the inherent cell-to-cell variations to be addressed on a series string of cells and reduces test costs substantially in comparison to individual cell testing.

  4. Novel negative mass density resonant metamaterial unit cell

    Energy Technology Data Exchange (ETDEWEB)

    Cselyuszka, Norbert, E-mail: cselyu@yahoo.com; Sečujski, Milan, E-mail: secujski@uns.ac.rs; Crnojević-Bengin, Vesna, E-mail: bengin@uns.ac.rs

    2015-01-02

    In this paper a novel resonant unit cell of one-dimensional acoustic metamaterials is presented, which exhibits negative effective mass density. We theoretically analyze the unit cell and develop a closed analytical formula for its effective mass density. Then we proceed to demonstrate left-handed propagation of acoustic waves using the proposed unit cell. Finally, we present its dual-band version, capable of operating at two independent frequencies. - Highlights: • A novel acoustic metamaterial unit cell provides Lorentz-type resonant effective mass density. • Analytical formula for effective mass density is derived. • Acoustic bandstop medium and left-handed metamaterial based on the novel unit cell are presented. • Modified version of the unit cell, operating at two independent frequencies, is proposed.

  5. A Unit Cell Laboratory Experiment: Marbles, Magnets, and Stacking Arrangements

    Science.gov (United States)

    Collins, David C.

    2011-01-01

    An undergraduate first-semester general chemistry laboratory experiment introducing face-centered, body-centered, and simple cubic unit cells is presented. Emphasis is placed on the stacking arrangement of solid spheres used to produce a particular unit cell. Marbles and spherical magnets are employed to prepare each stacking arrangement. Packing…

  6. Differentiation Induction of Mouse Neural Stem Cells in Hydrogel Tubular Microenvironments with Controlled Tube Dimensions.

    Science.gov (United States)

    Onoe, Hiroaki; Kato-Negishi, Midori; Itou, Akane; Takeuchi, Shoji

    2016-05-01

    In this paper, a tubular 3D microenvironment created in a calcium alginate hydrogel microtube with respect to the effect of scaffold dimensions on the differentiation of mouse neuronal stem cells (mNSCs) is evaluated. Five types of hydrogel microtubes with different core diameters (≈65-200 μm) and shell thicknesses (≈30-110 μm) are fabricated by using a double coaxial microfluidic device, and differentiation of encapsulated mNSCs is induced by changing the growth medium to the differentiation medium. The influence of the microtube geometries is examined by using quantitative real-time polymerase chain reaction and fluorescent immunocytochemistry. The analyses reveal that differences in microtube thickness within 30-110 μm affected the relative Tuj1 expression but do not affect the morphology of encapsulated mNSCs. The diameters of cores influence both the relative Tuj1 expression and morphology of the differentiated neurons. It is found that the tubular microenvironment with a core diameter of less than ≈100 μm contributes to forming highly viable and aligned neural tissue. The tubular microenvironment can provide an effective method for constructing microfiber-shaped neural tissues with geometrically controlled differentiation induction.

  7. Cell type classifiers for breast cancer microscopic images based on fractal dimension texture analysis of image color layers.

    Science.gov (United States)

    Jitaree, Sirinapa; Phinyomark, Angkoon; Boonyaphiphat, Pleumjit; Phukpattaranont, Pornchai

    2015-01-01

    Having a classifier of cell types in a breast cancer microscopic image (BCMI), obtained with immunohistochemical staining, is required as part of a computer-aided system that counts the cancer cells in such BCMI. Such quantitation by cell counting is very useful in supporting decisions and planning of the medical treatment of breast cancer. This study proposes and evaluates features based on texture analysis by fractal dimension (FD), for the classification of histological structures in a BCMI into either cancer cells or non-cancer cells. The cancer cells include positive cells (PC) and negative cells (NC), while the normal cells comprise stromal cells (SC) and lymphocyte cells (LC). The FD feature values were calculated with the box-counting method from binarized images, obtained by automatic thresholding with Otsu's method of the grayscale images for various color channels. A total of 12 color channels from four color spaces (RGB, CIE-L*a*b*, HSV, and YCbCr) were investigated, and the FD feature values from them were used with decision tree classifiers. The BCMI data consisted of 1,400, 1,200, and 800 images with pixel resolutions 128 × 128, 192 × 192, and 256 × 256, respectively. The best cross-validated classification accuracy was 93.87%, for distinguishing between cancer and non-cancer cells, obtained using the Cr color channel with window size 256. The results indicate that the proposed algorithm, based on fractal dimension features extracted from a color channel, performs well in the automatic classification of the histology in a BCMI. This might support accurate automatic cell counting in a computer-assisted system for breast cancer diagnosis.

  8. Fabrication and characteristics of unit cell for SOFC

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Gwi-Yeol; Eom, Seung-Wook; Moon, Seong-In [Korea Electrotechnology Research Institute, Kyongnam (Korea, Republic of)] [and others

    1996-12-31

    Research and development on solid oxide fuel cells in Korea have been mainly focused on unit cell and small stack. Fuel cell system is called clean generation system which not cause NOx or SOx. It is generation efficiency come to 50-60% in contrast to 40% of combustion generation system. Among the fuel cell system, solid oxide fuel cell is constructed of ceramics, so stack construction is simple, power density is very high, and there are no corrosion problems. The object of this study is to develop various composing material for SOFC generation system, and to test unit cell performance manufactured. So we try to present a guidance for developing mass power generation system. We concentrated on development of manufacturing process for cathode, anode and electrolyte.

  9. Dimension quotients

    OpenAIRE

    Hartl, M; Mikhailov, R.; Passi, I. B. S.

    2008-01-01

    We present two approaches, one homological and the other simplicial, for the investigation of dimension quotients of groups. The theory is illustrated, in particular, with a conceptual discussion of the fourth and fifth dimension quotients.

  10. Iron oxide nanoparticles decrease nuclear fractal dimension of buccal epithelial cells in a time-dependent manner.

    Science.gov (United States)

    Nikolovski, D; Dugalic, S; Pantic, I

    2017-05-23

    In this paper, we present results that iron oxide nanoparticles (IONPs) induce time-dependent structural changes in nuclei of buccal epithelial cells. The cells were treated with magnetite, Fe3 O4 nanoparticles (spherical shape, diameter 80-100 nanometres). The digital micrographs of the nuclei were made in 3 different time points: 15, 30 and 60 min after the treatment with IONPs, as well as in the control cells. A total of 120 nuclear structures (30 per sample) were analysed. Fractal analysis of nuclei was done in ImageJ software of the National Institutes of Health, (Bethesda, MD, USA). For each nuclear structure, the values of fractal dimension and lacunarity were calculated. There was a time-dependent reduction of nuclear fractal dimension in buccal epithelial cells after exposure to magnetite iron oxide nanoparticles. Negative trend was observed (p lacunarity, as another fractal parameter was shown to increase, also in a time-dependent manner, after the treatment with IONPs. To our knowledge, this is the first study to investigate effects of magnetite nanomaterial on nuclear fractal complexity, and also the first to apply fractal analysis method in testing of the interaction between nanoparticles and cell nucleus in this experimental setting. © 2017 The Authors Journal of Microscopy © 2017 Royal Microscopical Society.

  11. Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models.

    Science.gov (United States)

    Hedayati, R; Sadighi, M; Mohammadi-Aghdam, M; Zadpoor, A A

    2016-03-01

    Additive manufacturing (AM) has enabled fabrication of open-cell porous biomaterials based on repeating unit cells. The micro-architecture of the porous biomaterials and, thus, their physical properties could then be precisely controlled. Due to their many favorable properties, porous biomaterials manufactured using AM are considered as promising candidates for bone substitution as well as for several other applications in orthopedic surgery. The mechanical properties of such porous structures including static and fatigue properties are shown to be strongly dependent on the type of the repeating unit cell based on which the porous biomaterial is built. In this paper, we study the mechanical properties of porous biomaterials made from a relatively new unit cell, namely truncated cube. We present analytical solutions that relate the dimensions of the repeating unit cell to the elastic modulus, Poisson's ratio, yield stress, and buckling load of those porous structures. We also performed finite element modeling to predict the mechanical properties of the porous structures. The analytical solution and computational results were found to be in agreement with each other. The mechanical properties estimated using both the analytical and computational techniques were somewhat higher than the experimental data reported in one of our recent studies on selective laser melted Ti-6Al-4V porous biomaterials. In addition to porosity, the elastic modulus and Poisson's ratio of the porous structures were found to be strongly dependent on the ratio of the length of the inclined struts to that of the uninclined (i.e. vertical or horizontal) struts, α, in the truncated cube unit cell. The geometry of the truncated cube unit cell approaches the octahedral and cube unit cells when α respectively approaches zero and infinity. Consistent with those geometrical observations, the analytical solutions presented in this study approached those of the octahedral and cube unit cells when

  12. Learning about the Unit Cell and Crystal Lattice with Computerized Simulations and Games: A Pilot Study

    Science.gov (United States)

    Luealamai, Sutha; Panijpan, Bhinyo

    2012-01-01

    The authors have developed a computer-based learning module on the unit cell of various types of crystal. The module has two components: the virtual unit cell (VUC) part and the subsequent unit cell hunter part. The VUC is a virtual reality simulation for students to actively arrive at the unit cell from exploring, from a broad view, the crystal…

  13. Learning about the Unit Cell and Crystal Lattice with Computerized Simulations and Games: A Pilot Study

    Science.gov (United States)

    Luealamai, Sutha; Panijpan, Bhinyo

    2012-01-01

    The authors have developed a computer-based learning module on the unit cell of various types of crystal. The module has two components: the virtual unit cell (VUC) part and the subsequent unit cell hunter part. The VUC is a virtual reality simulation for students to actively arrive at the unit cell from exploring, from a broad view, the crystal…

  14. Biology 23. Unit One -- The Cell: Structure and Physiology.

    Science.gov (United States)

    Nederland Independent School District, TX.

    GRADES OR AGES: Not given. SUBJECT MATTER: Biology, the structure and physiology of the cell. ORGANIZATION AND PHYSICAL APPEARANCE: There are four sections: a) objectives for the unit, b) bibliography, c) activities, and d) evaluation. The guide is directed to the student rather than the teacher. The guide is mimeographed and stapled, with no…

  15. Nuclear fractal dimension in oral squamous cell carcinoma: a novel method for the evaluation of grading, staging, and survival.

    Science.gov (United States)

    Mincione, Gabriella; Di Nicola, Marta; Di Marcantonio, Maria Carmela; Muraro, Raffaella; Piattelli, Adriano; Rubini, Corrado; Penitente, Enrico; Piccirilli, Marcello; Aprile, Giuseppe; Perrotti, Vittoria; Artese, Luciano

    2015-10-01

    Fractal dimension (FD) in tissue specimens from patients with oral squamous cell carcinoma (OSCC) was evaluated. FD values in different stages of OSCC, and the correlations with clinicopathological variables and patient survival were investigated. Histological sections from OSCC and control non-neoplastic mucosa specimens were stained with hematoxylin-eosin for pathological analysis and with Feulgen for nuclear evaluation. FD in OSCC groups vs. controls revealed statistically significant differences (P Fractal geometry could give insights into tumor morphology and could become an useful tool for analyzing irregular tumor growth patterns.

  16. The dimensions of brand romance as predictors of brand loyalty among cell phone users

    National Research Council Canada - National Science Library

    Danie Petzer; Pierre Mostert; Liezl-Marie Kruger; Stefanie Kuhn

    2014-01-01

      In a competitive cell phone industry where consumers have a wide variety of cell phone brands to choose from, it is imperative for marketers to foster brand loyalty in order to establish enduring...

  17. Polymer electrolyte fuel cell mini power unit for portable application

    Science.gov (United States)

    Urbani, F.; Squadrito, G.; Barbera, O.; Giacoppo, G.; Passalacqua, E.; Zerbinati, O.

    This paper describes the design, realisation and test of a power unit based on a polymer electrolyte fuel cell, operating at room temperature, for portable application. The device is composed of an home made air breathing fuel cell stack, a metal hydride tank for H 2 supply, a dc-dc converter for power output control and a fan for stack cooling. The stack is composed by 10 cells with an active surface of 25 cm 2 and produces a rated power of 15 W at 6 V and 2 A. The stack successfully runs with end-off fed hydrogen without appreciable performance degradation during the time. The final assembled system is able to generate 12 W at 9.5 V, and power a portable DVD player for 3 h in continuous. The power unit has collected about 100 h of operation without maintenance.

  18. Polymer electrolyte fuel cell mini power unit for portable application

    Energy Technology Data Exchange (ETDEWEB)

    Urbani, F.; Squadrito, G.; Barbera, O.; Giacoppo, G.; Passalacqua, E. [CNR-ITAE, via Salita S. Lucia sopra Contesse n. 5, 98126 S. Lucia, Messina (Italy); Zerbinati, O. [Universita del Piemonte Orientale, Dip. di Scienze dell' Ambiente e della Vita, via Bellini 25/g, 15100 Alessandria (Italy)

    2007-06-20

    This paper describes the design, realisation and test of a power unit based on a polymer electrolyte fuel cell, operating at room temperature, for portable application. The device is composed of an home made air breathing fuel cell stack, a metal hydride tank for H{sub 2} supply, a dc-dc converter for power output control and a fan for stack cooling. The stack is composed by 10 cells with an active surface of 25 cm{sup 2} and produces a rated power of 15 W at 6 V and 2 A. The stack successfully runs with end-off fed hydrogen without appreciable performance degradation during the time. The final assembled system is able to generate 12 W at 9.5 V, and power a portable DVD player for 3 h in continuous. The power unit has collected about 100 h of operation without maintenance. (author)

  19. Organotypic culture in three dimensions prevents radiation-induced transformation in human lung epithelial cells

    Science.gov (United States)

    El-Ashmawy, Mariam; Coquelin, Melissa; Luitel, Krishna; Batten, Kimberly; Shay, Jerry W.

    2016-08-01

    The effects of radiation in two-dimensional (2D) cell culture conditions may not recapitulate tissue responses as modeled in three-dimensional (3D) organotypic culture. In this study, we determined if the frequency of radiation-induced transformation and cancer progression differed in 3D compared to 2D culture. Telomerase immortalized human bronchial epithelial cells (HBECs) with shTP53 and mutant KRas expression were exposed to various types of radiation (gamma, +H, 56Fe) in either 2D or 3D culture. After irradiation, 3D structures were dissociated and passaged as a monolayer followed by measurement of transformation, cell growth and expression analysis. Cells irradiated in 3D produced significantly fewer and smaller colonies in soft agar than their 2D-irradiated counterparts (gamma P = 0.0004 +H P = 0.049 56Fe P < 0.0001). The cell culture conditions did not affect cell killing, the ability of cells to survive in a colony formation assay, and proliferation rates after radiation—implying there was no selection against cells in or dissociated from 3D conditions. However, DNA damage repair and apoptosis markers were increased in 2D cells compared to 3D cells after radiation. Ideally, expanding the utility of 3D culture will allow for a better understanding of the biological consequences of radiation exposure.

  20. Microbial fuel cells as pollutant treatment units: Research updates.

    Science.gov (United States)

    Zhang, Quanguo; Hu, Jianjun; Lee, Duu-Jong

    2016-10-01

    Microbial fuel cells (MFC) are a device that can convert chemical energy in influent substances to electricity via biological pathways. Based on the consent that MFC technology should be applied as a waste/wastewater treatment unit rather than a renewable energy source, this mini-review discussed recent R&D efforts on MFC technologies for pollutant treatments and highlighted the challenges and research and development needs. Owing to the low power density levels achievable by larger-scale MFC, the MFC should be used as a device other than energy source such as being a pollutant treatment unit.

  1. Fluorescent resonance energy transfer: A tool for probing molecular cell-biomaterial interactions in three dimensions.

    Science.gov (United States)

    Huebsch, Nathaniel D; Mooney, David J

    2007-05-01

    The current paradigm in designing biomaterials is to optimize material chemical and physical parameters based on correlations between these parameters and downstream biological responses, whether in vitro or in vivo. Extensive developments in molecular design of biomaterials have facilitated identification of several biophysical and biochemical variables (e.g. adhesion peptide density, substrate elastic modulus) as being critical to cell response. However, these empirical observations do not indicate whether different parameters elicit cell responses by modulating redundant variables of the cell-material interface (e.g. number of cell-material bonds, cell-matrix mechanics). Recently, fluorescence resonance energy transfer (FRET) has been applied to quantitatively analyze parameters of the cell-material interface for both two- and three-dimensional adhesion substrates. Tools based on FRET have been utilized to quantify several parameters of the cell-material interface relevant to cell response, including molecular changes in matrix proteins induced by interactions both with surfaces and cells, the number of bonds between integrins and their adhesion ligands, and changes in the crosslink density of hydrogel synthetic extracellular matrix analogs. As such techniques allow both dynamic and 3-D analyses they will be useful to quantitatively relate downstream cellular responses (e.g. gene expression) to the composition of this interface. Such understanding will allow bioengineers to fully exploit the potential of biomaterials engineered on the molecular scale, by optimizing material chemical and physical properties to a measurable set of interfacial parameters known to elicit a predictable response in a specific cell population. This will facilitate the rational design of complex, multi-functional biomaterials used as model systems for studying diseases or for clinical applications.

  2. Is the time dimension of the cell cycle re-entry in AD regulated by centromere cohesion dynamics?

    Science.gov (United States)

    Bajić, Vladan P; Spremo-Potparević, Biljana; Zivković, Lada; Djelić, Ninoslav; Smith, Mark A

    2008-01-01

    Chromosomal involvement is a legitimate, yet not well understood, feature of Alzheimer disease (AD). Firstly, AD affects more women than men. Secondly, the amyloid-β protein precursor genetic mutations, responsible for a cohort of familial AD cases, reside on chromosome 21, the same chromosome responsible for the developmental disorder Down's syndrome. Thirdly, lymphocytes from AD patients display a novel chromosomal phenotype, namely premature centromere separation (PCS). Other documented morphological phenomena associated with AD include the occurrence of micronuclei, aneuploidy, binucleation, telomere instability, and cell cycle re-entry protein expression. Based on these events, here we present a novel hypothesis that the time dimension of cell cycle re-entry in AD is highly regulated by centromere cohesion dynamics. In view of the fact that neurons can re-enter the cell division cycle, our hypothesis predicts that alterations in the signaling pathway leading to premature cell death in neurons is a consequence of altered regulation of the separation of centromeres as a function of time. It is well known that centromeres in the metaphase-anaphase transition separate in a non-random, sequential order. This sequence has been shown to be deregulated in aging cells, various tumors, syndromes of chromosome instability, following certain chemical inductions, as well as in AD. Over time, premature chromosome separation is both a result of, and a driving force behind, further cohesion impairment, activation of cyclin dependent kinases, and mitotic catastrophe, a vicious circle resulting in cellular degeneration and death.

  3. Caspase inhibitors affect the kinetics and dimensions of tracheary elements in xylogenic Zinnia (Zinnia elegans) cell cultures.

    Science.gov (United States)

    Twumasi, Peter; Iakimova, Elena T; Qian, Tian; van Ieperen, Wim; Schel, Jan H N; Emons, Anne Mie C; van Kooten, Olaf; Woltering, Ernst J

    2010-08-06

    The xylem vascular system is composed of fused dead, hollow cells called tracheary elements (TEs) that originate through trans-differentiation of root and shoot cambium cells. TEs undergo autolysis as they differentiate and mature. The final stage of the formation of TEs in plants is the death of the involved cells, a process showing some similarities to programmed cell death (PCD) in animal systems. Plant proteases with functional similarity to proteases involved in mammalian apoptotic cell death (caspases) are suggested as an integral part of the core mechanism of most PCD responses in plants, but participation of plant caspase-like proteases in TE PCD has not yet been documented. Confocal microscopic images revealed the consecutive stages of TE formation in Zinnia cells during trans-differentiation. Application of the caspase inhibitors Z-Asp-CH2-DCB, Ac-YVAD-CMK and Ac-DEVD-CHO affected the kinetics of formation and the dimensions of the TEs resulting in a significant delay of TE formation, production of larger TEs and in elimination of the 'two-wave' pattern of TE production. DNA breakdown and appearance of TUNEL-positive nuclei was observed in xylogenic cultures and this was suppressed in the presence of caspase inhibitors. To the best of our knowledge this is the first report showing that caspase inhibitors can modulate the process of trans-differentiation in Zinnia xylogenic cell cultures. As caspase inhibitors are closely associated with cell death inhibition in a variety of plant systems, this suggests that the altered TE formation results from suppression of PCD. The findings presented here are a first step towards the use of appropriate PCD signalling modulators or related molecular genetic strategies to improve the hydraulic properties of xylem vessels in favour of the quality and shelf life of plants or plant parts.

  4. Caspase inhibitors affect the kinetics and dimensions of tracheary elements in xylogenic Zinnia (Zinnia elegans cell cultures

    Directory of Open Access Journals (Sweden)

    Schel Jan HN

    2010-08-01

    Full Text Available Abstract Background The xylem vascular system is composed of fused dead, hollow cells called tracheary elements (TEs that originate through trans-differentiation of root and shoot cambium cells. TEs undergo autolysis as they differentiate and mature. The final stage of the formation of TEs in plants is the death of the involved cells, a process showing some similarities to programmed cell death (PCD in animal systems. Plant proteases with functional similarity to proteases involved in mammalian apoptotic cell death (caspases are suggested as an integral part of the core mechanism of most PCD responses in plants, but participation of plant caspase-like proteases in TE PCD has not yet been documented. Results Confocal microscopic images revealed the consecutive stages of TE formation in Zinnia cells during trans-differentiation. Application of the caspase inhibitors Z-Asp-CH2-DCB, Ac-YVAD-CMK and Ac-DEVD-CHO affected the kinetics of formation and the dimensions of the TEs resulting in a significant delay of TE formation, production of larger TEs and in elimination of the 'two-wave' pattern of TE production. DNA breakdown and appearance of TUNEL-positive nuclei was observed in xylogenic cultures and this was suppressed in the presence of caspase inhibitors. Conclusions To the best of our knowledge this is the first report showing that caspase inhibitors can modulate the process of trans-differentiation in Zinnia xylogenic cell cultures. As caspase inhibitors are closely associated with cell death inhibition in a variety of plant systems, this suggests that the altered TE formation results from suppression of PCD. The findings presented here are a first step towards the use of appropriate PCD signalling modulators or related molecular genetic strategies to improve the hydraulic properties of xylem vessels in favour of the quality and shelf life of plants or plant parts.

  5. Zero loss magnetic metamaterials using powered active unit cells.

    Science.gov (United States)

    Yuan, Yu; Popa, Bogdan-Ioan; Cummer, Steven A

    2009-08-31

    We report the design and experimental measurement of a powered active magnetic metamaterial with tunable permeability. The unit cell is based on the combination of an embedded radiofrequency amplifier and a tunable phase shifter, which together control the response of the medium. The measurements show that a negative permeability metamaterial with zero loss or even gain can be achieved through an array of such metamaterial cells. This kind of active metamaterial can find use in applications that are performance limited due to material losses.

  6. A heated vapor cell unit for DAVLL in atomic rubidium

    OpenAIRE

    McCarron, Daniel J.; Hughes, Ifan G.; Tierney, Patrick; Cornish, Simon L

    2007-01-01

    The design and performance of a compact heated vapor cell unit for realizing a dichroic atomic vapor laser lock (DAVLL) for the D2 transitions in atomic rubidium is described. A 5 cm-long vapor cell is placed in a double-solenoid arrangement to produce the required magnetic field; the heat from the solenoid is used to increase the vapor pressure and correspondingly the DAVLL signal. We have characterized experimentally the dependence of important features of the DAVLL signal on magnetic field...

  7. Composite Bipolar Plate for Unitized Fuel Cell/Electrolyzer Systems

    Science.gov (United States)

    Mittelsteadt, Cortney K.; Braff, William

    2009-01-01

    In a substantial improvement over present alkaline systems, an advanced hybrid bipolar plate for a unitized fuel cell/electrolyzer has been developed. This design, which operates on pure feed streams (H2/O2 and water, respectively) consists of a porous metallic foil filled with a polymer that has very high water transport properties. Combined with a second metallic plate, the pore-filled metallic plates form a bipolar plate with an empty cavity in the center.

  8. Biopolymers and cells in dimension of microbial community architecture. 1. Fenomenology

    Directory of Open Access Journals (Sweden)

    Irodov D. I.

    2009-04-01

    Full Text Available A current conception of microbial communities and state of cells and polymers in them has been changing fast. The qualitatively new research area is developing swiftly together with traditional knowledge. This new area is connected with revealing auto- multiplicating objects of non-viral origin in natural substrata and living organisms whose size is less than theoretically possible minimal cell. In this review the researcmicrobial communitiesh results in both traditional and new arias are analyzed

  9. Solid Oxide Fuel Cells coupled with a biomass gasification unit

    Directory of Open Access Journals (Sweden)

    Skrzypkiewicz Marek

    2016-01-01

    Full Text Available A possibility of fuelling a solid oxide fuel cell stack (SOFC with biomass fuels can be realized by coupling a SOFC system with a self-standing gasification unit. Such a solution enables multi-fuel operation, elasticity of the system as well as the increase of the efficiency of small-scale biomass-to-electricity conversion units. A system of this type, consisting of biomass gasification unit, gas purification unit, SOFC stack, anode off-gas afterburner and peripherals was constructed and operated successfully. During the process, biomass fuel (wood chips was gasified with air as gasification agent. The gasifier was capable of converting up to 30 kW of fuel to syngas with efficiencies up to 75%. Syngas leaving the gasification unit is delivered to a medium temperature adsorber for sulphur compounds removal. Steam is added to the purified fuel to maintain steam to carbon ratio higher than 2. The syngas then is passed to a SOFC stack through a fuel preheater. In such a configuration it was possible to operate a commercial 1.3 kW stack within its working regime. Conducted tests confirmed successful operation of a SOFC stack fuelled by biomass-sourced syngas.

  10. Thermodynamics of Condensed Phases: Formula Unit Volume, "V[subscript m]", and the Determination of the Number of Formula Units, "Z", in a Crystallographic Unit Cell

    Science.gov (United States)

    Glasser, Leslie

    2011-01-01

    Formula unit (or molecular) volume, "V[subscript m]", is related to many thermodynamic and physical properties of materials, so that knowledge of "V[subscript m]" is useful in prediction of such properties for known and even hypothetical materials. The symbol "Z" represents the number of formula units in a crystallographic unit cell; "Z" thus…

  11. Every cell is special : genome-wide studies add a new dimension to single-cell biology

    NARCIS (Netherlands)

    Junker, Jan Philipp; van Oudenaarden, Alexander

    2014-01-01

    Single-cell analyses have provided invaluable insights into studying heterogenity, signaling, and stochastic gene expression. Recent technological advances now open the door to genome-wide single-cell studies.

  12. Titania nanotubes with adjustable dimensions for drug reservoir sites and enhanced cell adhesion.

    Science.gov (United States)

    Çalışkan, Nazlı; Bayram, Cem; Erdal, Ebru; Karahaliloğlu, Zeynep; Denkbaş, Emir Baki

    2014-02-01

    This study aims to generate a bactericidal agent releasing surface via nanotube layer on titanium metal and to investigate how aspect ratio of nanotubes affects drug elution time and cell proliferation. Titania nanotube layers were generated on metal surfaces by anodic oxidation at various voltage and time parameters. Gentamicin loading was carried out via simple pipetting and the samples were tested against S. aureus for the efficacy of the applied modification. Drug releasing time and cell proliferation were also tested in vitro. Titania nanotube layers with varying diameters and lengths were prepared after anodization and anodizing duration was found as the most effective parameter for amount of loaded drug and drug releasing time. Drug elution lasted up to 4 days after anodizing for 80 min of the samples, whereas release completed in 24 h when the samples were anodized for 20 min. All processed samples had bactericidal properties against S. aureus organism except unmodified titanium, which was also subjected to drug incorporation step. The anodization also enhanced water wettability and cell adhesion results. Anodic oxidation is an effective surface modification to enhance tissue-implant interactions and also resultant titania layer can act as a drug reservoir for the release of bactericidal agents. The use of implants as local drug eluting devices is promising but further in vivo testing is required.

  13. Kinetics of Reactive Modules Adds Discriminative Dimensions for Selective Cell Imaging.

    Science.gov (United States)

    Quérard, Jérôme; Le Saux, Thomas; Gautier, Arnaud; Alcor, Damien; Croquette, Vincent; Lemarchand, Annie; Gosse, Charlie; Jullien, Ludovic

    2016-05-18

    Living cells are chemical mixtures of exceptional interest and significance, whose investigation requires the development of powerful analytical tools fulfilling the demanding constraints resulting from their singular features. In particular, multiplexed observation of a large number of molecular targets with high spatiotemporal resolution appears highly desirable. One attractive road to address this analytical challenge relies on engaging the targets in reactions and exploiting the rich kinetic signature of the resulting reactive module, which originates from its topology and its rate constants. This review explores the various facets of this promising strategy. We first emphasize the singularity of the content of a living cell as a chemical mixture and suggest that its multiplexed observation is significant and timely. Then, we show that exploiting the kinetics of analytical processes is relevant to selectively detect a given analyte: upon perturbing the system, the kinetic window associated to response read-out has to be matched with that of the targeted reactive module. Eventually, we introduce the state-of-the-art of cell imaging exploiting protocols based on reaction kinetics and draw some promising perspectives.

  14. Zeroing in on red blood cell unit expiry.

    Science.gov (United States)

    Ayyalil, Fathima; Irwin, Greg; Ross, Bryony; Manolis, Michael; Enjeti, Anoop K

    2017-09-20

    Expiry of red blood cell (RBC) units is a significant contributor to wastage of precious voluntary donations. Effective strategies aimed at optimal resource utilization are required to minimize wastage. This retrospective study analyzed the strategic measures implemented to reduce expiry of RBC units in an Australian tertiary regional hospital. The measures, which included inventory rearrangement, effective stock rotation, and the number of emergency courier services required during a 24-month period, were evaluated. There was no wastage of RBC units due to expiry over the 12 months after policy changes. Before these changes, approximately half of RBC wastage (261/511) was due to expiry. The total number of transfusions remained constant in this period and there was no increase in the use of emergency couriers. Policy changes implemented were decreasing the RBC inventory level by one-third and effective stock rotation and using a computerized system to link the transfusion services across the area. Effective stock rotation resulted in a reduction in older blood (>28 days) received in the main laboratory rotated from peripheral hospitals, down from 6%-41% to 0%-2.5%. Age-related expiry of blood products is preventable and can be significantly reduced by improving practices in the pathology service. This study provides proof of principle for "zero tolerance for RBC unit expiry" across a large networked blood banking service. © 2017 The Authors Transfusion published by Wiley Periodicals, Inc. on behalf of AABB.

  15. Titania nanotubes with adjustable dimensions for drug reservoir sites and enhanced cell adhesion

    Energy Technology Data Exchange (ETDEWEB)

    Çalışkan, Nazlı; Bayram, Cem; Erdal, Ebru; Karahaliloğlu, Zeynep; Denkbaş, Emir Baki, E-mail: denkbas@hacettepe.edu.tr

    2014-02-01

    This study aims to generate a bactericidal agent releasing surface via nanotube layer on titanium metal and to investigate how aspect ratio of nanotubes affects drug elution time and cell proliferation. Titania nanotube layers were generated on metal surfaces by anodic oxidation at various voltage and time parameters. Gentamicin loading was carried out via simple pipetting and the samples were tested against S. aureus for the efficacy of the applied modification. Drug releasing time and cell proliferation were also tested in vitro. Titania nanotube layers with varying diameters and lengths were prepared after anodization and anodizing duration was found as the most effective parameter for amount of loaded drug and drug releasing time. Drug elution lasted up to 4 days after anodizing for 80 min of the samples, whereas release completed in 24 h when the samples were anodized for 20 min. All processed samples had bactericidal properties against S. aureus organism except unmodified titanium, which was also subjected to drug incorporation step. The anodization also enhanced water wettability and cell adhesion results. Anodic oxidation is an effective surface modification to enhance tissue–implant interactions and also resultant titania layer can act as a drug reservoir for the release of bactericidal agents. The use of implants as local drug eluting devices is promising but further in vivo testing is required. - Highlights: • Titanium surfaces were anodized and a nanotubular titania layer was obtained. • Drug eluting time was found to be increasing with anodizaton time. • Varying nanotube diameters has no effect in drug elution time but amount of incorporated drug.

  16. Analysis of spatial relationships in three dimensions: tools for the study of nerve cell patterning

    Directory of Open Access Journals (Sweden)

    Raven Mary A

    2008-07-01

    Full Text Available Abstract Background Multiple technologies have been brought to bear on understanding the three-dimensional morphology of individual neurons and glia within the brain, but little progress has been made on understanding the rules controlling cellular patterning. We describe new matlab-based software tools, now available to the scientific community, permitting the calculation of spatial statistics associated with 3D point patterns. The analyses are largely derived from the Delaunay tessellation of the field, including the nearest neighbor and Voronoi domain analyses, and from the spatial autocorrelogram. Results Our tools enable the analysis of the spatial relationship between neurons within the central nervous system in 3D, and permit the modeling of these fields based on lattice-like simulations, and on simulations of minimal-distance spacing rules. Here we demonstrate the utility of our analysis methods to discriminate between two different simulated neuronal populations. Conclusion Together, these tools can be used to reveal the presence of nerve cell patterning and to model its foundation, in turn informing on the potential developmental mechanisms that govern its establishment. Furthermore, in conjunction with analyses of dendritic morphology, they can be used to determine the degree of dendritic coverage within a volume of tissue exhibited by mature nerve cells.

  17. Gorenstein dimensions

    CERN Document Server

    Christensen, Lars Winther

    2000-01-01

    This book is intended as a reference for mathematicians working with homological dimensions in commutative algebra and as an introduction to Gorenstein dimensions for graduate students with an interest in the same. Any admirer of classics like the Auslander-Buchsbaum-Serre characterization of regular rings, and the Bass and Auslander-Buchsbaum formulas for injective and projective dimension of f.g. modules will be intrigued by this book's content. Readers should be well-versed in commutative algebra and standard applications of homological methods. The framework is that of complexes, but all major results are restated for modules in traditional notation, and an appendix makes the proofs accessible for even the casual user of hyperhomological methods.

  18. Particle-In-Cell Modeling of Plasma-Based Accelerators in Two and Three Dimensions

    CERN Document Server

    Hemker, Roy G

    2015-01-01

    In this dissertation, a fully object-oriented, fully relativistic, multi-dimensional Particle-In-Cell code was developed and applied to answer key questions in plasma-based accelerator research. The simulations increase the understanding of the processes in laser plasma and beam-plasma interaction, allow for comparison with experiments, and motivate the development of theoretical models. The simulations support the idea that the injection of electrons in a plasma wave by using a transversely propagating laser pulse is possible. The beam parameters of the injected electrons found in the simulations compare reasonably with beams produced by conventional methods and therefore laser injection is an interesting concept for future plasma-based accelerators. Simulations of the optical guiding of a laser wakefield driver in a parabolic plasma channel support the idea that electrons can be accelerated over distances much longer than the Rayleigh length in a channel. Simulations of plasma wakefield acceleration in the ...

  19. The use of fractal dimension and lacunarity in the characterization of mast cell degranulation in rainbow trout (Onchorhynchus mykiss).

    Science.gov (United States)

    Manera, M; Dezfuli, B S; Borreca, C; Giari, L

    2014-11-01

    Fractal analysis is a reliable method for describing, summarizing object complexity and heterogeneity and has been widely used in biology and medicine to deal with scale, size and shape management problems. The aim of present survey was to use fractal analysis as a complexity measure to characterize mast cells (MCs) degranulation in a rainbow trout ex vivo model (isolated organ bath). Compound 48/80, a condensation product of N-methyl-p-methoxyphenethylamine with formaldehyde, was adopted as MCs degranulation agent in trout intestinal strips. Fractal dimension (D), as a measure of complexity, 'roughness' and lacunarity (λ), as a measure of rotational and translational invariance, heterogeneity, in other words, of the texture, were compared in MCs images taken from intestinal strips before and after compound 48/80 addition to evaluate if and how they were affected by degranulation. Such measures were also adopted to evaluate their discrimination efficacy between compound 48/80 degranulated group and not degranulated group and the results were compared with previously reported data obtained with conventional texture analysis (image histogram, run-length matrix, co-occurrence matrix, autoregressive model, wavelet transform) on the same experimental material. Outlines, skeletons and original greyscale images were fractal analysed to evaluate possible significant differences in the measures values according to the analysed feature. In particular, and considering outline and skeleton as analysed features, fractal dimensions from compound 48/80 treated intestinal strips were significantly higher than the corresponding untreated ones (paired t and Wilcoxon test, p lacunarity values were significantly lower (paired Wilcoxon test, p lacunarity (image heterogeneity) reduction is consistent with the biological informative content decrease, due to granule content depletion. In spite of the significant differences in fractal dimension and lacunarity values registered according

  20. The Metaboloepigenetic Dimension of Cancer Stem Cells: Evaluating the Market Potential for New Metabostemness-Targeting Oncology Drugs.

    Science.gov (United States)

    Menendez, Javier A

    2015-01-01

    The current global portfolio of oncology drugs is unlikely to produce durable disease remission for millions of cancer patients worldwide. This is due, in part, to the existence of so-called cancer stem cells (CSCs), a particularly aggressive type of malignant cell that is capable of indefinite self-replication, is refractory to conventional treatments, and is skilled at spreading and colonizing distant organs. To date, no drugs from big-league Pharma companies are capable of killing CSCs. Why? Quite simply, a classic drug development approach based on mutated genes and pathological protein products cannot efficiently target the plastic, epigenetic proclivity of cancer tissues to generate CSCs. Recent studies have proposed that certain elite metabolites (oncometabolites) and other common metabolites can significantly influence the establishment and maintenance of epigenetic signatures of stemness and cancer. Consequently, cellular metabolism and the core epigenetic codes, DNA methylation and histone modification, can be better viewed as an integrated metaboloepigenetic dimension of CSCs, which we have recently termed cancer metabostemness. By targeting weaknesses in the bridge connecting metabolism and epigenetics, a new generation of metabostemnessspecific drugs can be generated for potent and long-lasting elimination of life-threatening CSCs. Here I evaluate the market potential of re-modeling the oncology drug pipeline by discovering and developing new metabolic approaches able to target the apparently undruggable epigenetic programs that dynamically regulate the plasticity of non-CSC and CSC cellular states.

  1. Solid-State Selective 13C Excitation and Spin Diffusion NMR to Resolve Spatial Dimensions in Plant Cell Walls

    Energy Technology Data Exchange (ETDEWEB)

    Foston, M.; Katahira, R.; Gjersing, E.; Davis, M. F.; Ragauskas, A. J.

    2012-02-15

    The average spatial dimensions between major biopolymers within the plant cell wall can be resolved using a solid-state NMR technique referred to as a {sup 13}C cross-polarization (CP) SELDOM (selectively by destruction of magnetization) with a mixing time delay for spin diffusion. Selective excitation of specific aromatic lignin carbons indicates that lignin is in close proximity to hemicellulose followed by amorphous and finally crystalline cellulose. {sup 13}C spin diffusion time constants (T{sub SD}) were extracted using a two-site spin diffusion theory developed for {sup 13}C nuclei under magic angle spinning (MAS) conditions. These time constants were then used to calculate an average lower-limit spin diffusion length between chemical groups within the plant cell wall. The results on untreated {sup 13}C enriched corn stover stem reveal that the lignin carbons are, on average, located at distances {approx}0.7-2.0 nm from the carbons in hemicellulose and cellulose, whereas the pretreated material had larger separations.

  2. Flow field measurements in the cell culture unit

    Science.gov (United States)

    Walker, Stephen; Wilder, Mike; Dimanlig, Arsenio; Jagger, Justin; Searby, Nancy

    2002-01-01

    The cell culture unit (CCU) is being designed to support cell growth for long-duration life science experiments on the International Space Station (ISS). The CCU is a perfused loop system that provides a fluid environment for controlled cell growth experiments within cell specimen chambers (CSCs), and is intended to accommodate diverse cell specimen types. Many of the functional requirements depend on the fluid flow field within the CSC (e.g., feeding and gas management). A design goal of the CCU is to match, within experimental limits, all environmental conditions, other than the effects of gravity on the cells, whether the hardware is in microgravity ( micro g), normal Earth gravity, or up to 2g on the ISS centrifuge. In order to achieve this goal, two steps are being taken. The first step is to characterize the environmental conditions of current 1g cell biology experiments being performed in laboratories using ground-based hardware. The second step is to ensure that the design of the CCU allows the fluid flow conditions found in 1g to be replicated from microgravity up to 2g. The techniques that are being used to take these steps include flow visualization, particle image velocimetry (PIV), and computational fluid dynamics (CFD). Flow visualization using the injection of dye has been used to gain a global perspective of the characteristics of the CSC flow field. To characterize laboratory cell culture conditions, PIV is being used to determine the flow field parameters of cell suspension cultures grown in Erlenmeyer flasks on orbital shakers. These measured parameters will be compared to PIV measurements in the CSCs to ensure that the flow field that cells encounter in CSCs is within the bounds determined for typical laboratory experiments. Using CFD, a detailed simulation is being developed to predict the flow field within the CSC for a wide variety of flow conditions, including microgravity environments. Results from all these measurements and analyses of the

  3. Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells.

    Science.gov (United States)

    Ahmadi, S M; Campoli, G; Amin Yavari, S; Sajadi, B; Wauthle, R; Schrooten, J; Weinans, H; Zadpoor, A A

    2014-06-01

    Cellular structures with highly controlled micro-architectures are promising materials for orthopedic applications that require bone-substituting biomaterials or implants. The availability of additive manufacturing techniques has enabled manufacturing of biomaterials made of one or multiple types of unit cells. The diamond lattice unit cell is one of the relatively new types of unit cells that are used in manufacturing of regular porous biomaterials. As opposed to many other types of unit cells, there is currently no analytical solution that could be used for prediction of the mechanical properties of cellular structures made of the diamond lattice unit cells. In this paper, we present new analytical solutions and closed-form relationships for predicting the elastic modulus, Poisson׳s ratio, critical buckling load, and yield (plateau) stress of cellular structures made of the diamond lattice unit cell. The mechanical properties predicted using the analytical solutions are compared with those obtained using finite element models. A number of solid and porous titanium (Ti6Al4V) specimens were manufactured using selective laser melting. A series of experiments were then performed to determine the mechanical properties of the matrix material and cellular structures. The experimentally measured mechanical properties were compared with those obtained using analytical solutions and finite element (FE) models. It has been shown that, for small apparent density values, the mechanical properties obtained using analytical and numerical solutions are in agreement with each other and with experimental observations. The properties estimated using an analytical solution based on the Euler-Bernoulli theory markedly deviated from experimental results for large apparent density values. The mechanical properties estimated using FE models and another analytical solution based on the Timoshenko beam theory better matched the experimental observations. Copyright © 2014 Elsevier Ltd

  4. DIMENSION STONE DEPOSITS IN CROATIA

    Directory of Open Access Journals (Sweden)

    Branko Crnković

    1993-12-01

    Full Text Available The geology, petrographycal composition and properties of dimension stone deposits in Croatia are described. Dimension stone deposits in the conception of mobilistic view of the genesis and structure of Dinarides, as well as after stratigraphic units, are considered. Valuation of the dimension stones of the active quarries is exposed. The marketable categories of dimension stone in Croatia are different varietes of limestones and calcareous clastites, primarly of Cretaceous age, and to lesser degree of Jurassic and Paleogene. The greatest part of deposits is concentrated in the Adriatic carbonate platform or Adriaticum.

  5. Particle-In-Cell simulation of laser irradiated two-component microspheres in 2 and 3 dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Pauw, Viktoria, E-mail: viktoria.pauw@physik.uni-muenchen.de [Ludwig-Maximilians-Universität München, 80539 (Germany); Ostermayr, Tobias M. [Ludwig-Maximilians-Universität München, 80539 (Germany); Max-Planck-Institut für Quantenoptik, 85748 Garching (Germany); Bamberg, Karl-Ulrich [Ludwig-Maximilians-Universität München, 80539 (Germany); Leibniz-Rechenzentrum, 85748 Garching (Germany); Böhl, Patrick; Deutschmann, Fabian; Kiefer, Daniel; Klier, Constantin; Moschüring, Nils; Ruhl, Hartmut [Ludwig-Maximilians-Universität München, 80539 (Germany)

    2016-09-01

    We examine proton acceleration from spherical carbon-hydrogen targets irradiated by a relativistic laser pulse. Particle-In-Cell (PIC) simulations are carried out in 2 and 3 dimensions (2D and 3D) to compare fast proton spectra. We find very different final kinetic energies in 2D and 3D simulations. We show that they are caused by the different Coulomb fields in 2D and 3D. We propose a correction scheme for the proton energies to test this hypothesis. In the case of sub-focus diameter targets comparison of corrected 2D energies with 3D results show good agreement. This demonstrates that caution is required when modeling experiments with simulations of reduced dimensionality. - Highlights: • A laser-irradiated polysterene microsphere is modeled in a 2D3V-PIC simulation. • Different results are obtained for different linear laser polarisation directions. • 3D3V simulations are carried out and compared to the 2D cases. • A model is proposed explaining the different energies by Coulomb field alteration.

  6. Porous silicon for micro-sized fuel cell reformer units

    Energy Technology Data Exchange (ETDEWEB)

    Presting, H.; Konle, J.; Starkov, V.; Vyatkin, A.; Koenig, U

    2004-04-25

    Randomly, self-organized and ordered anodically etched porous silicon with pore sizes down to hundred nanometers have been fabricated for a variety of automotive applications which range from carrier structures in fuel cell technology up to shower heads for fuel injection in combustion engines. The porous wafers are produced by deep anodic etching which is a very effective and cheap fabrication method compatible to standard Si CMOS fabrication technology. The density of nano- (and micro-) pores can be varied in a wide range by choice of substrate doping level and appropriate electrolyte solution. Surface enlargement up to a factor of 1000 can be achieved [J. Electrochem. Soc. 149 (1) (2002) G70]. After deposition of a catalyst on the inner surface of the pores these structures can be used as an effective catalytic reaction area for the injected hydrocarbons in a micro-steam reformer unit with a small reaction volume. In addition deep anodic etching (DAE) of a pinhole array with very high aspect ratios is demonstrated using a pre-patterned inverted pyramidal array which is produced by lithography and subsequent wet chemical potassium hydroxide (KOH) etch. The structures can also be used as carrier structures for the hydrogen separation membrane of the reforming gas in a reformer unit when a thin layer of palladium is evaporated prior to the anodic etching of the pores. The noble metal foil serves as anode contact during the etch as well as hydrogen separating membrane of the device.

  7. Biopolymers and cells in dimension of microbial community architecture. 3. Microcenosis, cell, biopolymers – what they are?

    Directory of Open Access Journals (Sweden)

    Kordium V. A.

    2010-07-01

    Full Text Available The published experimental data on functional differences in organization and functioning of genetic materials between eukaryotes and prokaryotes have been analyzed. A new conception of both specific status of prokaryotic genome and uncertainty of the cell definition has been proposed. It is based on the information about multitude and diversity of the channels for horizontal gene transfers, taking into account the fertility characteristics, and the facts of formation of some bodies less than 0,2 µm in size under different conditions. The question is: what are the forms which cannot be cultivated in laboratory and at the same time prevail in natural substrates?

  8. A Miniaturized Antenna with Negative Index Metamaterial Based on Modified SRR and CLS Unit Cell for UWB Microwave Imaging Applications

    Directory of Open Access Journals (Sweden)

    Md. Moinul Islam

    2015-01-01

    Full Text Available A miniaturized antenna employing a negative index metamaterial with modified split-ring resonator (SRR and capacitance-loaded strip (CLS unit cells is presented for Ultra wideband (UWB microwave imaging applications. Four left-handed (LH metamaterial (MTM unit cells are located along one axis of the antenna as the radiating element. Each left-handed metamaterial unit cell combines a modified split-ring resonator (SRR with a capacitance-loaded strip (CLS to obtain a design architecture that simultaneously exhibits both negative permittivity and negative permeability, which ensures a stable negative refractive index to improve the antenna performance for microwave imaging. The antenna structure, with dimension of 16 × 21 × 1.6 mm3, is printed on a low dielectric FR4 material with a slotted ground plane and a microstrip feed. The measured reflection coefficient demonstrates that this antenna attains 114.5% bandwidth covering the frequency band of 3.4–12.5 GHz for a voltage standing wave ratio of less than 2 with a maximum gain of 5.16 dBi at 10.15 GHz. There is a stable harmony between the simulated and measured results that indicate improved nearly omni-directional radiation characteristics within the operational frequency band. The stable surface current distribution, negative refractive index characteristic, considerable gain and radiation properties make this proposed negative index metamaterial antenna optimal for UWB microwave imaging applications.

  9. A Miniaturized Antenna with Negative Index Metamaterial Based on Modified SRR and CLS Unit Cell for UWB Microwave Imaging Applications.

    Science.gov (United States)

    Islam, Md Moinul; Islam, Mohammad Tariqul; Samsuzzaman, Md; Faruque, Mohammad Rashed Iqbal; Misran, Norbahiah; Mansor, Mohd Fais

    2015-01-23

    A miniaturized antenna employing a negative index metamaterial with modified split-ring resonator (SRR) and capacitance-loaded strip (CLS) unit cells is presented for Ultra wideband (UWB) microwave imaging applications. Four left-handed (LH) metamaterial (MTM) unit cells are located along one axis of the antenna as the radiating element. Each left-handed metamaterial unit cell combines a modified split-ring resonator (SRR) with a capacitance-loaded strip (CLS) to obtain a design architecture that simultaneously exhibits both negative permittivity and negative permeability, which ensures a stable negative refractive index to improve the antenna performance for microwave imaging. The antenna structure, with dimension of 16 × 21 × 1.6 mm³, is printed on a low dielectric FR4 material with a slotted ground plane and a microstrip feed. The measured reflection coefficient demonstrates that this antenna attains 114.5% bandwidth covering the frequency band of 3.4-12.5 GHz for a voltage standing wave ratio of less than 2 with a maximum gain of 5.16 dBi at 10.15 GHz. There is a stable harmony between the simulated and measured results that indicate improved nearly omni-directional radiation characteristics within the operational frequency band. The stable surface current distribution, negative refractive index characteristic, considerable gain and radiation properties make this proposed negative index metamaterial antenna optimal for UWB microwave imaging applications.

  10. A Miniaturized Antenna with Negative Index Metamaterial Based on Modified SRR and CLS Unit Cell for UWB Microwave Imaging Applications

    Science.gov (United States)

    Islam, Md. Moinul; Islam, Mohammad Tariqul; Samsuzzaman, Md.; Faruque, Mohammad Rashed Iqbal; Misran, Norbahiah; Mansor, Mohd Fais

    2015-01-01

    A miniaturized antenna employing a negative index metamaterial with modified split-ring resonator (SRR) and capacitance-loaded strip (CLS) unit cells is presented for Ultra wideband (UWB) microwave imaging applications. Four left-handed (LH) metamaterial (MTM) unit cells are located along one axis of the antenna as the radiating element. Each left-handed metamaterial unit cell combines a modified split-ring resonator (SRR) with a capacitance-loaded strip (CLS) to obtain a design architecture that simultaneously exhibits both negative permittivity and negative permeability, which ensures a stable negative refractive index to improve the antenna performance for microwave imaging. The antenna structure, with dimension of 16 × 21 × 1.6 mm3, is printed on a low dielectric FR4 material with a slotted ground plane and a microstrip feed. The measured reflection coefficient demonstrates that this antenna attains 114.5% bandwidth covering the frequency band of 3.4–12.5 GHz for a voltage standing wave ratio of less than 2 with a maximum gain of 5.16 dBi at 10.15 GHz. There is a stable harmony between the simulated and measured results that indicate improved nearly omni-directional radiation characteristics within the operational frequency band. The stable surface current distribution, negative refractive index characteristic, considerable gain and radiation properties make this proposed negative index metamaterial antenna optimal for UWB microwave imaging applications. PMID:28787945

  11. Fractal dimension as a measure of altered actin cytoskeleton in MC3T3-E1 cells under simulated microgravity using 3-D/2-D clinostats.

    Science.gov (United States)

    Qian, A R; Li, D; Han, J; Gao, X; Di, S M; Zhang, W; Hu, L F; Shang, Peng

    2012-05-01

    Osteoblasts, the bone-forming cells, respond to various mechanical forces, such as stretch and fluid shear force in essentially similar ways. The cytoskeleton, as the load-bearing architecture of the cell, is sensitive to altered inertial forces. Disruption of the cytoskeleton will result in alteration of cellular structure and function. However, it is difficult to quantitatively illustrate cytoskeletal rearrangement because of the complexity of cytoskeletal structure. Usually, the morphological changes in actin organization caused by external stimulus are basically descriptive. In this study, fractal dimensions (D) analysis was used to quantify the morphological changes in the actin cytoskeleton of osteoblast-like cells (MC3T3-E1) under simulated microgravity using 3-D/2-D clinostats. The ImageJ software was used to count the fractal dimension of actin cytoskeleton by box-counting methods. Real-time PCR and immunofluroscent assays were used to further confirm the results obtained by fractal dimension analysis. The results showed significant decreases in D value of actin cytoskeleton, β-actin mRNA expression, and the mean fluorescence intensity of F-actin in osteoblast-like cells after 24 or 48 h of incubation under 3-D/2-D clinorotation condition compared with control. The findings indicate that 3-D/2-D clinorotation affects both actin cytoskeleton architecture and mRNA expression, and fractal may be a promising approach for quantitative analysis of the changes in cytoskeleton in different environments.

  12. Super Unit Cells in Aperture-Based Metamaterials

    Directory of Open Access Journals (Sweden)

    Dragan Tanasković

    2015-01-01

    Full Text Available An important class of electromagnetic metamaterials are aperture-based metasurfaces. Examples include extraordinary optical transmission arrays and double fishnets with negative refractive index. We analyze a generalization of such metamaterials where a simple aperture is now replaced by a compound object formed by superposition of two or more primitive objects (e.g., rectangles, circles, and ellipses. Thus obtained “super unit cell” shows far richer behavior than the subobjects that comprise it. We show that nonlocalities introduced by overlapping simple subobjects can be used to produce large deviations of spectral dispersion even for small additive modifications of the basic geometry. Technologically, some super cells may be fabricated by simple spatial shifting of the existing photolithographic masks. In our investigation we applied analytical calculations and ab initio finite element modeling to prove the possibility to tailor the dispersion including resonances for plasmonic nanocomposites by adjusting the local geometry and exploiting localized interactions at a subwavelength level. Any desired form could be defined using simple primitive objects, making the situation a geometrical analog of the case of series expansion of a function. Thus an additional degree of tunability of metamaterials is obtained. The obtained designer structures can be applied in different fields like waveguiding and sensing.

  13. Effect of Yttria Content on the Zirconia Unit Cell Parameters

    Energy Technology Data Exchange (ETDEWEB)

    Krogstad, Jessica A.; Lepple, Maren; Gao, Yan; Lipkin, Don M.; Levi, Carlos G. (UCSB); (GE Global)

    2012-02-06

    The relationship between yttria concentration and the unit cell parameters in partially and fully stabilized zirconia has been reassessed, motivated by the need to improve the accuracy of phase analysis upon decomposition of t{prime}-based thermal barrier coatings. Compositions ranging from 6 to 18 mol% YO{sub 1.5} were synthesized and examined by means of high-resolution X-ray diffraction. Lattice parameters were determined using the Rietveld refinement method, a whole-pattern fitting procedure. The revised empirical relationships fall within the range of those published previously. However, efforts to achieve superior homogeneity of the materials, as well as accuracy of the composition and lattice parameters, provide increased confidence in the reliability of these correlations for use in future studies. Additional insight into the potential sources for scatter previously reported for the transition region ({approx}12-14 mol% YO{sub 1.5}), where tetragonal and cubic phases have been observed to coexist, is also provided. Implications on the current understanding of stabilization mechanisms in zirconia are discussed.

  14. An Analysis on Cultural Values of Companies from China and the United States-Based on Hofstede’s Cultural Dimension Theory

    Institute of Scientific and Technical Information of China (English)

    占小海; 张若晨

    2015-01-01

    Nowadays, commercial competition is becoming fiercer and fiercer, and with the globalization proceeding, when a company tries to expand, promote and develop, it needs to adapt itself to the open business society while not losing its own cul-ture. Since English has been widely used in the world, an effective and suitable English website is essential for a company to use as a kind of advertisement and publicity, where its cultural values are presented.With companies’websites as subjects and Hofst-ede’s cultural dimension theory as the theoretical basis, this study, through text content and data analysis of company profiles, strategies and cultures, tries to find out the tendency of Chinese and American companies on the five cultural value dimensions, which is power distance, uncertainty avoidance, individualism, masculinity and long-term orientation. Accordingly, constructive suggestions are put forward to help appease and avoid misunderstandings, and promote business communication and collabora-tion.

  15. Cell Churches and Stem Cell Marketing in South Korea and the United States.

    Science.gov (United States)

    Sipp, Douglas

    2016-05-23

    The commercial provision of putative stem cell-based medical interventions in the absence of conclusive evidence of safety and efficacy has formed the basis of an unregulated industry for more than a decade. Many clinics offering such supposed stem cell treatments include statements about the 'ethical' nature of somatic (often colloquially referred to as 'adult' stem cells) stem cells, in specific contrast to human embryonic stem cells (hESCs), which have been the subject of intensive political, legal, and religious controversy since their first derivation in 1998. Christian groups-both Roman Catholic and evangelical Protestant-in many countries have explicitly promoted the medical potential and current-day successes in the clinical application of somatic stem cells, lending indirect support to the activities of businesses marketing stem cells ahead of evidence. In this article, I make a preliminary examination of how the structures and belief systems of certain churches in South Korea and the United States, both of which are home to significant stem cell marketing industries, has complemented other factors, including national biomedical funding initiatives, international economic rivalries, permissive legal structures, which have lent impetus to a problematic and often exploitative sector of biomedical commerce.

  16. Multiplying dimensions

    CERN Multimedia

    2013-01-01

    A few weeks ago, I had a vague notion of what TED was, and how it worked, but now I’m a confirmed fan. It was my privilege to host CERN’s first TEDx event last Friday, and I can honestly say that I can’t remember a time when I was exposed to so much brilliance in such a short time.   TEDxCERN was designed to give a platform to science. That’s why we called it Multiplying Dimensions – a nod towards the work we do here, while pointing to the broader importance of science in society. We had talks ranging from the most subtle pondering on the nature of consciousness to an eighteen year old researcher urging us to be patient, and to learn from our mistakes. We had musical interludes that included encounters between the choirs of local schools and will.i.am, between an Israeli pianist and an Iranian percussionist, and between Grand Opera and high humour. And although I opened the event by announcing it as a day off from physics, we had a quite brill...

  17. Single fibre and multifibre unit cell analysis of strength and cracking of unidirectional composites

    DEFF Research Database (Denmark)

    Wang, H.W.; Zhou, H.W.; Mishnaevsky, Leon

    2009-01-01

    Numerical simulations of damage evolution in composites reinforced with single and multifibre are presented. Several types of unit cell models are considered: single fibre unit cell, multiple fibre unit cell with one and several damageable sections per fibres, unit cells with homogeneous...... damageable parts in composites (matrix cracks, fibre/matrix interface damage and fibre fracture) was observed in the simulations. The strength of interface begins to influence the deformation behaviour of the cell only after the fibre is broken. In this case, the higher interface layer strength leads...... and inhomogeneous interfaces, etc. Two numerical damage models, cohesive elements, and damageable layers are employed for the simulation of the damage evolution in single fibre and multifibre unit cells. The two modelling approaches were compared and lead to the very close results. Competition among the different...

  18. Automated assembling of single fuel cell units for use in a fuel cell stack

    Science.gov (United States)

    Jalba, C. K.; Muminovic, A.; Barz, C.; Nasui, V.

    2017-05-01

    The manufacturing of PEMFC stacks (POLYMER ELEKTROLYT MEMBRAN Fuel Cell) is nowadays still done by hand. Over hundreds of identical single components have to be placed accurate together for the construction of a fuel cell stack. Beside logistic problems, higher total costs and disadvantages in weight the high number of components produce a higher statistic interference because of faulty erection or material defects and summation of manufacturing tolerances. The saving of costs is about 20 - 25 %. Furthermore, the total weight of the fuel cells will be reduced because of a new sealing technology. Overall a one minute cycle time has to be aimed per cell at the manufacturing of these single components. The change of the existing sealing concept to a bonded sealing is one of the important requisites to get an automated manufacturing of single cell units. One of the important steps for an automated gluing process is the checking of the glue application by using of an image processing system. After bonding the single fuel cell the sealing and electrical function can be checked, so that only functional and high qualitative cells can get into further manufacturing processes.

  19. Unit cell geometry of multiaxial preforms for structural composites

    Science.gov (United States)

    Ko, Frank; Lei, Charles; Rahman, Anisur; Du, G. W.; Cai, Yun-Jia

    1993-01-01

    The objective of this study is to investigate the yarn geometry of multiaxial preforms. The importance of multiaxial preforms for structural composites is well recognized by the industry but, to exploit their full potential, engineering design rules must be established. This study is a step in that direction. In this work the preform geometry for knitted and braided preforms was studied by making a range of well designed samples and studying them by photo microscopy. The structural geometry of the preforms is related to the processing parameters. Based on solid modeling and B-spline methodology a software package is developed. This computer code enables real time structural representations of complex fiber architecture based on the rule of preform manufacturing. The code has the capability of zooming and section plotting. These capabilities provide a powerful means to study the effect of processing variables on the preform geometry. the code also can be extended to an auto mesh generator for downstream structural analysis using finite element method. This report is organized into six sections. In the first section the scope and background of this work is elaborated. In section two the unit cell geometries of braided and multi-axial warp knitted preforms is discussed. The theoretical frame work of yarn path modeling and solid modeling is presented in section three. The thin section microscopy carried out to observe the structural geometry of the preforms is the subject in section four. The structural geometry is related to the processing parameters in section five. Section six documents the implementation of the modeling techniques into the computer code MP-CAD. A user manual for the software is also presented here. The source codes and published papers are listed in the Appendices.

  20. X-ray powder diffraction data and unit cells of ammonium paratungstate tetrahydrate

    NARCIS (Netherlands)

    Put, J.W. van; Verkroost, T.W.; Sonneveld, E.J.

    1990-01-01

    X-Ray powder diffraction data and unit cell parameters of industrially produced, as well as bench scale prepared, ammonium paratungstate tetrahydrate are reported and compared with current Powder Data file (PDF) (1989) patterns. A least-squares refinement resulted in two slightly different unit cell

  1. Map service: United States Decadal Production History Cells

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map service displays present and past oil and gas production in the United States, as well as the location and intensity of exploratory drilling outside...

  2. Experimentally Shock-loaded Anhydrite: Unit-Cell Dimensions, Microstrain and Domain Size from X-Ray Diffraction

    Science.gov (United States)

    Skala, R.; Hoerz, F.

    2003-01-01

    Cretaceous Tertiary (K/T) boundary is traditionally associated with one of the most dramatic mass extinctions in the Earth history. A number of killing mechanisms have been suggested to contribute to the widespread extinctions of Cretaceous biota at this boundary, including severe, global deterioration of the atmosphere and hydrosphere from the shock-induced release of CO2 and SO(x) from carbonate- and sulfate-bearing target rocks, respectively. Recently carried out calculations revealed that the global warming caused by CO2 release was considerably less important than the cooling due to SO(x) gases release during the Chicxulub impact event. Considering apparent potential importance of the response of sulfates to the shock metamorphism, relative lack of the data on shock behavior of sulfates as well as some general difficulties encountered during thermodynamic modeling of the shock-induced CO2 loss from carbonates we subjected anhydrite to a series of shock experiments designed for complete recovery of the shocked material. We report here on the detail X-ray diffraction analysis of seven samples that were subjected to experimental shock-loading from 10 to 65 GPa.

  3. Dimensiones culturales e identidades situadas: la herencia maya en migrantes yucatecos a Estados Unidos Cultural Dimensions and Situated Identities: Mayan Inheritance in Yucatec Migrants to the United States

    Directory of Open Access Journals (Sweden)

    Pedro Antonio Be Ramírez

    2011-01-01

    Full Text Available Este artículo trata sobre la conformación identitaria de los migrantes de Telchac Pueblo a partir de algunos elementos culturales vinculados con su herencia maya ancestral. Las dimensiones culturales que aquí se presentan no son únicas ni mucho menos absolutas para explicar el pasado maya en Yucatán; más bien corresponden a ciertos aspectos que permiten comprender la manera en cómo los migrantes yucatecos se conciben a sí mismos desde discursos y prácticas situados en contextos sociales reales. Las bases o dimensiones culturales consideradas emblemas que otorgan carácter distintivo a la identidad son el eje central y admiten dar cuenta del mantenimiento, la reelaboración y lo situacional de las costumbres y tradiciones en esta región del sureste mexicano.This article focuses on the conformation of identity of migrants from Telchac Pueblo, Yucatan, viewed initially as cultural elements that play out Mayan ancient heritage. The cultural dimensions presented here are not unique, and much less absolute in explaining Yucatan's Mayan past. Rather they correspond to certain aspects that allow us to understand the ways in which yucatecan migrants conceive themselves within current situated discourse practices. The bases or cultural dimensions considered are emblematic and grant distinctive character to local identity: they are seen as a central axis that allows for comprehension of cultural persistence (or resistance, the (re elaboration of customs and the situational features of traditions within this Mexican southeast region.

  4. Myosin II controls cellular branching morphogenesis and migration in three dimensions by minimizing cell-surface curvature.

    Science.gov (United States)

    Elliott, Hunter; Fischer, Robert S; Myers, Kenneth A; Desai, Ravi A; Gao, Lin; Chen, Christopher S; Adelstein, Robert S; Waterman, Clare M; Danuser, Gaudenz

    2015-02-01

    In many cases, cell function is intimately linked to cell shape control. We used endothelial cell branching morphogenesis as a model to understand the role of myosin II in shape control of invasive cells migrating in 3D collagen gels. We applied principles of differential geometry and mathematical morphology to 3D image sets to parameterize cell branch structure and local cell-surface curvature. We find that Rho/ROCK-stimulated myosin II contractility minimizes cell-scale branching by recognizing and minimizing local cell-surface curvature. Using microfabrication to constrain cell shape identifies a positive feedback mechanism in which low curvature stabilizes myosin II cortical association, where it acts to maintain minimal curvature. The feedback between regulation of myosin II by curvature and control of curvature by myosin II drives cycles of localized cortical myosin II assembly and disassembly. These cycles in turn mediate alternating phases of directionally biased branch initiation and retraction to guide 3D cell migration.

  5. Hydrogen Fuel Cell Performance as Telecommunications Backup Power in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Saur, Genevieve [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sprik, Sam [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-03-01

    Working in collaboration with the U.S. Department of Energy (DOE) and industry project partners, the National Renewable Energy Laboratory (NREL) acts as the central data repository for the data collected from real-world operation of fuel cell backup power systems. With American Recovery and Reinvestment Act of 2009 (ARRA) co-funding awarded through DOE's Fuel Cell Technologies Office, more than 1,300 fuel cell units were deployed over a three-plus-year period in stationary, material handling equipment, auxiliary power, and backup power applications. This surpassed a Fuel Cell Technologies Office ARRA objective to spur commercialization of an early market technology by installing 1,000 fuel cell units across several different applications, including backup power. By December 2013, 852 backup power units out of 1,330 fuel cell units deployed were providing backup service, mainly for telecommunications towers. For 136 of the fuel cell backup units, project participants provided detailed operational data to the National Fuel Cell Technology Evaluation Center for analysis by NREL's technology validation team. NREL analyzed operational data collected from these government co-funded demonstration projects to characterize key fuel cell backup power performance metrics, including reliability and operation trends, and to highlight the business case for using fuel cells in these early market applications. NREL's analyses include these critical metrics, along with deployment, U.S. grid outage statistics, and infrastructure operation.

  6. Advanced Composite Bipolar Plate for Unitized Regenerative Fuel Cell/Electrolyzer Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Development of an advanced composite bipolar plate is proposed for a unitized regenerative fuel cell and electrolyzer system that operates on pure feed streams...

  7. A cellular Potts model for the MMP-dependent and -independent cancer cell migration in matrix microtracks of different dimensions

    Science.gov (United States)

    Scianna, Marco; Preziosi, Luigi

    2014-03-01

    Cell migration is fundamental in a wide variety of physiological and pathological phenomena, among other in cancer invasion and development. In particular, the migratory/invasive capability of single metastatic cells is fundamental in determining the malignancy of a solid tumor. Specific cell migration phenotypes result for instance from the reciprocal interplay between the biophysical and biochemical properties of both the malignant cells themselves and of the surrounding environment. In particular, the extracellular matrices (ECMs) forming connective tissues can provide both loosely organized zones and densely packed barriers, which may impact cell invasion mode and efficiency. The critical processes involved in cell movement within confined spaces are (i) the proteolytic activity of matrix metalloproteinases (MMPs) and (ii) the deformation of the entire cell body, and in particular of the nucleus. We here present an extended cellular Potts model (CPM) to simulate a bio-engineered matrix system, which tests the active motile behavior of a single cancer cell into narrow channels of different widths. As distinct features of our approach, the cell is modeled as a compartmentalized discrete element, differentiated in the nucleus and in the cytosolic region, while a directional shape-dependent movement is explicitly driven by the evolution of its polarity vector. As outcomes, we find that, in a large track, the tumor cell is not able to maintain a directional movement. On the contrary, a structure of subcellular width behaves as a contact guidance sustaining cell persistent locomotion. In particular, a MMP-deprived cell is able to repolarize and follow the micropattern geometry, while a full MMP activity leads to a secondary track expansion by degrading the matrix structure. Finally, we confirm that cell movement within a subnuclear structure can be achieved either by pericellular proteolysis or by a significant deformation of cell nucleus.

  8. Super Unit Cells in Aperture-Based Metamaterials

    OpenAIRE

    Dragan Tanasković; Zoran Jakšić; Marko Obradov; Olga Jakšić

    2015-01-01

    An important class of electromagnetic metamaterials are aperture-based metasurfaces. Examples include extraordinary optical transmission arrays and double fishnets with negative refractive index. We analyze a generalization of such metamaterials where a simple aperture is now replaced by a compound object formed by superposition of two or more primitive objects (e.g., rectangles, circles, and ellipses). Thus obtained “super unit cell” shows far richer behavior than the subobjects that compris...

  9. Overview of commercialization of stationary fuel cell power plants in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Hooie, D.T.; Williams, M.C.

    1995-07-01

    In this paper, DOE`s efforts to assist private sector organizations to develop and commercialize stationary fuel cell power plants in the United States are discussed. The paper also provides a snapshot of the status of stationary power fuel cell development occurring in the US, addressing all fuel cell types. This paper discusses general characteristics, system configurations, and status of test units and demonstration projects. The US DOE, Morgantown Energy Technology Center is the lead center for implementing DOE`s program for fuel cells for stationary power.

  10. Dielectric Behavior of Low Microwave Loss Unit Cell for All Dielectric Metamaterial

    OpenAIRE

    Tianhuan Luo; Bo Li; Qian Zhao; Ji Zhou

    2015-01-01

    With a deep study of the metamaterial, its unit cells have been widely extended from metals to dielectrics. The dielectric based unit cells attract much attention because of the advantage of easy preparation, tunability, and higher frequency response, and so forth. Using the conventional solid state method, we prepared a kind of incipient ferroelectrics (calcium titanate, CaTiO3) with higher microwave permittivity and lower loss, which can be successfully used to construct metamaterials. The ...

  11. Recent insights into the cell biology of thyroid angiofollicular units.

    OpenAIRE

    Colin, Ides M.; Denef, Jean-François; Lengelé, Benoît; Many, Marie-Christine; Gérard, Anne-Catherine

    2013-01-01

    In thyrocytes, cell polarity is of crucial importance for proper thyroid function. Many intrinsic mechanisms of self-regulation control how the key players involved in thyroid hormone (TH) biosynthesis interact in apical microvilli, so that hazardous biochemical processes may occur without detriment to the cell. In some pathological conditions, this enzymatic complex is disrupted, with some components abnormally activated into the cytoplasm, which can lead to further morphological and functio...

  12. Embryonic stem cells growing in 3-dimensions shift from reliance on the substrate to each other for mechanical support.

    Science.gov (United States)

    Teo, Ailing; Lim, Mayasari; Weihs, Daphne

    2015-07-16

    Embryonic stem cells (ESCs) grow into three-dimensional (3D) spheroid structures en-route to tissue growth. In vitro spheroids can be controllably induced on a two-dimensional (2D) substrate with high viability. Here we use a method for inducing pluripotent embryoid body (EB) formation on flat polyacrylamide gels while simultaneously evaluating the dynamic changes in the mechano-biology of the growing 3D spheroids. During colony growth in 3D, pluripotency is conserved while the spheroid-substrate interactions change significantly. We correlate colony-size, cell-applied traction-forces, and expressions of cell-surface molecules indicating cell-cell and cell-substrate interactions, while verifying pluripotency. We show that as the colony size increases with time, the stresses applied by the spheroid to the gel decrease in the 3D growing EBs; control cells growing in 2D-monolayers maintain unvarying forces. Concurrently, focal-adhesion mediated cell-substrate interactions give way to E-cadherin cell-cell connections, while pluripotency. The mechano-biological changes occurring in the growing embryoid body are required for stabilization of the growing pluripotent 3D-structure, and can affect its potential uses including differentiation. This could enable development of more effective expansion, differentiation, and separation approaches for clinical purposes.

  13. Radial variation of basic density and wood cells dimensions of Cariniana legalis (Mart. O. Kuntze depending on the provenance

    Directory of Open Access Journals (Sweden)

    Israel Luiz de Lima

    2011-12-01

    Full Text Available Provenance tests can provide information about the silvicultural behavior and wood quality for the exploration of variability and conservation of genetic material for future use. This study aims to investigate the effect of provenances on some wood properties of the Cariniana legalis. Seedlings of three provenances (Porto Ferreira, Piracicaba and Campinas were planted in Luiz Antonio-SP using randomized block design with six replicates. After 26 years of planting, eighteen trees, six of each provenance, were felled. The properties studied were basic density and the cellular dimensions. The results revealed that the basic density, fiber length, fiber wall thickness, vessel element length, vessel diameter, uniseriate ray height and width were influenced by the provenances. A good positive relationship was found among the fiber length, fiber wall thickness, vessel element length; vessel diameter and multiseriate ray height with radial position and a negative relation between vessel frequency with the radial position.

  14. Dominant unit CD34+ cell dose predicts engraftment after double-unit cord blood transplantation and is influenced by bank practice.

    Science.gov (United States)

    Purtill, Duncan; Smith, Katherine; Devlin, Sean; Meagher, Richard; Tonon, Joann; Lubin, Marissa; Ponce, Doris M; Giralt, Sergio; Kernan, Nancy A; Scaradavou, Andromachi; Stevens, Cladd E; Barker, Juliet N

    2014-11-06

    We investigated the unit characteristics associated with engraftment after double-unit cord blood (CB) transplantation (dCBT) and whether these could be reliably identified during unit selection. Cumulative incidence of neutrophil engraftment in 129 myeloablative dCBT recipients was 95% (95% confidence interval: 90-98%). When precryopreservation characteristics were analyzed, the dominant unit CD34(+) cell dose was the only characteristic independently associated with engraftment (hazard ratio, 1.43; P = .002). When postthaw characteristics were also included, only dominant unit infused viable CD34(+) cell dose independently predicted engraftment (hazard ratio, 1.95; P banks were more likely to have low recovery (P banks and units with cryovolumes other than 24.5 to 26.0 mL were more likely to have poor postthaw viability. Precryopreservation CD34(+) cell dose and banking practices should be incorporated into CB unit selection.

  15. Empowerment and continuous improvement in the United States, Mexico, Poland, and India: predicting fit on the basis of the dimensions of power distance and individualism.

    Science.gov (United States)

    Robert, C; Probst, T M; Martocchio, J J; Drasgow, F; Lawler, J J

    2000-10-01

    Although variations in national cultures predominate as explanation for the belief that universal approaches to management do not exist, there have been few reports of systematic studies. Data from employees of a single firm with operations in the United States, Mexico, Poland, and India were used to test the fit of empowerment and continuous improvement practices with national culture. Using the theoretical constructs of individualism-collectivism and power distance, the authors predicted that the practices would be more congruent in some cultures than in others and that value congruence would result in job satisfaction. Using structural equations modeling, the authors found that empowerment was negatively associated with satisfaction in India but positively associated in the other 3 samples. Continuous improvement was positively associated with satisfaction in all samples. Substantive, theoretical, and methodological implications are discussed.

  16. Fuel cell repeater unit including frame and separator plate

    Energy Technology Data Exchange (ETDEWEB)

    Yamanis, Jean; Hawkes, Justin R; Chiapetta, Jr., Louis; Bird, Connie E; Sun, Ellen Y; Croteau, Paul F

    2013-11-05

    An example fuel cell repeater includes a separator plate and a frame establishing at least a portion of a flow path that is operative to communicate fuel to or from at least one fuel cell held by the frame relative to the separator plate. The flow path has a perimeter and any fuel within the perimeter flow across the at least one fuel cell in a first direction. The separator plate, the frame, or both establish at least one conduit positioned outside the flow path perimeter. The conduit is outside of the flow path perimeter and is configured to direct flow in a second, different direction. The conduit is fluidly coupled with the flow path.

  17. Caspase inhibitors affect the kinetics and dimensions of tracheary elements in xylogenic Zinnia (Zinnia elegans) cell cultures

    NARCIS (Netherlands)

    Twumasi, P.; Iakimova, E.T.; Qian, T.; Ieperen, van W.; Schel, J.H.N.; Emons, A.M.C.; Kooten, van O.; Woltering, E.J.

    2010-01-01

    BACKGROUND: The xylem vascular system is composed of fused dead, hollow cells called tracheary elements (TEs) that originate through trans-differentiation of root and shoot cambium cells. TEs undergo autolysis as they differentiate and mature. The final stage of the formation of TEs in plants is the

  18. A strategy for depositing different types of cells in three dimensions to mimic tubular structures in tissues.

    Science.gov (United States)

    Yuan, Bo; Jin, Yu; Sun, Yi; Wang, Dong; Sun, Jiashu; Wang, Zhuo; Zhang, Wei; Jiang, Xingyu

    2012-02-14

    The fabrication of tubular structures, with multiple cell types forming different layers of the tube walls, is described using a stress-induced rolling membrane (SIRM). Cell orientation inside the tubes can also be controlled by topographical contact guidance. These layered tubes precisely mimic blood vessels and many other tubular structures, suggesting that they may be of great use in tissue engineering.

  19. Evaluation of the pneumatic tube system for transportation of packed red cell units

    Directory of Open Access Journals (Sweden)

    Supriya Dhar

    2015-01-01

    Full Text Available Background: Pneumatic tube system (PTS is commonly used in hospital settings to transport blood samples to diagnostic laboratories. At our blood center, we receive blood requisitions via the PTS, but units are carried to the ward by human courier. Recently we considered using the PTS for transporting blood units. Since, there are reports of hemolysis in blood samples sent through the PTS, we evaluated this system for transporting red cell units. Aims: The aim was to assess the effect of PTS transport on the quality of packed red cell units. Materials and Methods: A total of 50 red blood cells units (RBC, (25 non-irradiated and 25 irradiated were subjected to transportation through the PTS. The control arm in the study was age-matched RBC units not subjected to PTS transport. Each RBC unit was evaluated for hemoglobin (Hb, lactate dehydrogenase, potassium and plasma hemoglobin (Hb. The paired t-test was used to compare these parameters, and the P value was calculated. Results and Conclusion: The percentage of hemolysis after transportation through PTS was below the recommended guidelines. Delivery of the blood unit to the wrong station, bags lying unattended at the destination were few of the problems that had to be addressed. To conclude, though the PTS is a safe means of transporting blood products with reduction in the turn-around-time, it must be validated before use.

  20. Control of an afterburner in a diesel fuel cell power unit under variable load

    Science.gov (United States)

    Dolanc, Gregor; Pregelj, Boštjan; Petrovčič, Janko; Samsun, Remzi Can

    2017-01-01

    In this paper, the control system for a catalytic afterburner in a diesel fuel cell auxiliary power unit is presented. The catalytic afterburner is used to burn the non-utilised hydrogen and other possible combustible components of the fuel cell anode off-gas. To increase the energy efficiency of the auxiliary power unit, the thermal energy released in the catalytic afterburner is utilised to generate the steam for the fuel processor. For optimal operation of the power unit in all modes of operation including load change, stable steam generation is required and overall energy balance must be kept within design range. To achieve this, the reaction temperature of the catalytic afterburner must be stable in all modes of operation. Therefore, we propose the afterburner temperature control based on mass and thermal balances. Finally, we demonstrate the control system using the existing prototype of the diesel fuel cell auxiliary power unit.

  1. An Analysis of Environmental Dimensions Affected in Adoption of Hydrogen Fuel Cell Vehicles: A Study in Shah ALAM Industrial AREA, Selangor

    Directory of Open Access Journals (Sweden)

    Siron Rusinah

    2016-01-01

    Full Text Available The aim of the study is to identify the perceptions of respondents on environmental dimensions hat affected in adoption of hydrogen fuel cell vehicles. The study was conducted at Shah Alam industrial areas of Selangor, Malaysia, with the number of respondents are 120 respondents with various job positions that related with engineering and automobiles industry. The findings of the research shows that the dimensions of HFCV Internal Environmental total score of the items statement is 3.40 with the percentage of agreement in implementation is 3.72 percent, HFCV Environmental Information Systems shows that the total score of the items statement is 3.63 with the percentage of agreement on use to great extend is 42.5 percent, HFCV Cooperation with Customers shows that the total score of the items statement is 3.81 with the percentage of agreement on implementation is 44.2 percent. The findings on HFCV Eco Design shows that the total score of items statement is 4.02 with the percentage of agreement on implementation is 42.3 percent, HFCV Environmental Organizational Culture shows that the total score of the items statement is 3.37 with the percentage of agreement is 34.2 percent, HFCV Environmental Leadership shows that the total score of the items statement is 3.34 with the percentage of agreement is 48.2 percent. HFCV Proactive Green Innovation shows that the total score of items statement is 4.10 ahead of automobile got the highest mean score of 4.32 with the percentage of agreement is 41 percent. HFCV Environmental performance shows that the total score of the items statement is 3.87 with the percentage of agreement is 39 percent and the last environmental dimensions was HFCV Environmental Risks shows that the total score of the item statement is 4.00 with the percentage of agreement is 40 percent

  2. Efficiency of the unit cell in rectangular finned tube arrangements

    Energy Technology Data Exchange (ETDEWEB)

    Buzzoni, Luca; Dall' Olio, Roberto; Spiga, Marco [Bologna Univ., DIENCA, Bologna (Italy)

    1999-11-01

    This paper is aimed at presenting an investigation concerning the efficiency of the single unit in finned air-cooled heat exchangers with staggered and in-line bundles of rectangular ducts, where a hot process fluid flows inside extended-surface tubes and atmospheric air is circulated outside, over the extended surface. The differential energy equation is numerically solved by a finite difference technique, in order to determine the spatial temperature profiles, then the fin efficiency and the augmentation factor are calculated by a simple numerical integration. The results show that the temperature distribution and the fin performance depend on four dimensionless parameters (m,{beta},p{sub x},p{sub y}), the first accounting for the heat transfer condition, the other ones accounting for the geometry of the extended surface (tube aspect ratio and pitches). Several tables are presented, allowing the efficiency of the extended surface to be deduced as a function of the thermal and geometric parameters. (Author)

  3. Quantification of Cell-Free DNA in Red Blood Cell Units in Different Whole Blood Processing Methods

    Directory of Open Access Journals (Sweden)

    Andrew W. Shih

    2016-01-01

    Full Text Available Background. Whole blood donations in Canada are processed by either the red cell filtration (RCF or whole blood filtration (WBF methods, where leukoreduction is potentially delayed in WBF. Fresh WBF red blood cells (RBCs have been associated with increased in-hospital mortality after transfusion. Cell-free DNA (cfDNA is released by neutrophils prior to leukoreduction, degraded during RBC storage, and is associated with adverse patient outcomes. We explored cfDNA levels in RBCs prepared by RCF and WBF and different storage durations. Methods. Equal numbers of fresh (stored ≤14 days and older RBCs were sampled. cfDNA was quantified by spectrophotometry and PicoGreen. Separate regression models determined the association with processing method and storage duration and their interaction on cfDNA. Results. cfDNA in 120 RBC units (73 RCF, 47 WBF were measured. Using PicoGreen, WBF units overall had higher cfDNA than RCF units (p=0.0010; fresh WBF units had higher cfDNA than fresh RCF units (p=0.0093. Using spectrophotometry, fresh RBC units overall had higher cfDNA than older units (p=0.0031; fresh WBF RBCs had higher cfDNA than older RCF RBCs (p=0.024. Conclusion. Higher cfDNA in fresh WBF was observed compared to older RCF blood. Further study is required for association with patient outcomes.

  4. Human Embryonic and Hepatic Stem Cell Differentiation Visualized in Two and Three Dimensions Based on Serial Sections

    DEFF Research Database (Denmark)

    Vestentoft, Peter S.; Brøchner, Christian B; Lynnerup, Niels

    2015-01-01

    Pluripotent human embryonic stem cells (hESCs) are characterized by two defining properties, self-renewal and differentiation. Self-renewing hESCs express transcription factors OCT4, SOX2, and NANOG, and surface markers SSEA-4 and TRA-1-60 and TRA-1-81 and their ability to differentiate...... into derivatives of the three germ layers show the differentiating potential. Studies suggest a certain microheterogeneity of the hESC colonies, in which not all cells in one colony of apparently undifferentiated cells express all the expected markers. We describe a technique to paraffin embed an entire h...... of an entire colony is accomplished using 3D image processing software such as Mimics(®) or Amira(®). An extended version of this technique even allows for a high-magnification 3D-reconstruction of, e.g., hepatic stem cells in developing liver. These techniques combined allow for both a 2- and a 3-dimensional...

  5. High performance internal reforming unit for high temperature fuel cells

    Science.gov (United States)

    Ma, Zhiwen; Venkataraman, Ramakrishnan; Novacco, Lawrence J.

    2008-10-07

    A fuel reformer having an enclosure with first and second opposing surfaces, a sidewall connecting the first and second opposing surfaces and an inlet port and an outlet port in the sidewall. A plate assembly supporting a catalyst and baffles are also disposed in the enclosure. A main baffle extends into the enclosure from a point of the sidewall between the inlet and outlet ports. The main baffle cooperates with the enclosure and the plate assembly to establish a path for the flow of fuel gas through the reformer from the inlet port to the outlet port. At least a first directing baffle extends in the enclosure from one of the sidewall and the main baffle and cooperates with the plate assembly and the enclosure to alter the gas flow path. Desired graded catalyst loading pattern has been defined for optimized thermal management for the internal reforming high temperature fuel cells so as to achieve high cell performance.

  6. The Daniell cell, Ohm's law, and the emergence of the International System of Units

    Science.gov (United States)

    Jayson, Joel S.

    2014-01-01

    Telegraphy originated in the 1830s and 40 s and flourished in the following decades but with a patchwork of electrical standards. Electromotive force was for the most part measured in units of the predominant Daniell cell, but each telegraphy company had their own resistance standard. In 1862, the British Association for the Advancement of Science formed a committee to address this situation. By 1873, they had given definition to the electromagnetic system of units (emu) and defined the practical units of the ohm as 109 emu units of resistance and the volt as 108 emu units of electromotive force. These recommendations were ratified and expanded upon in a series of international congresses held between 1881 and 1904. A proposal by Giovanni Giorgi in 1901 took advantage of a coincidence between the conversion of the units of energy in the emu system (the erg) and in the practical system (the Joule). As it was, the same conversion factor existed between the cgs based emu system and a theretofore undefined MKS system. By introducing another unit X (where X could be any of the practical electrical units), Giorgi demonstrated that a self-consistent MKSX system was tenable without the need for multiplying factors. Ultimately, the ampere was selected as the fourth unit. It took nearly 60 years, but in 1960, Giorgi's proposal was incorporated as the core of the newly inaugurated International System of Units (SI). This article surveys the physics, physicists, and events that contributed to those developments.

  7. Synthesis of hexagonal ZnO clubs with opposite faces of unequal dimensions for the photoanode of dye-sensitized solar cells.

    Science.gov (United States)

    Lee, Chuan-Pei; Lin, Jen-Chieh; Wang, Yi-Chun; Chou, Chen-Yu; Yeh, Min-Hsin; Vittal, R; Ho, Kuo-Chuan

    2011-12-21

    Novel sub-micro sized hexagonal clubs of ZnO (HC-ZnO), which are coated as a scattering layer (SL) for the photoanode of a DSSC, are synthesized. X-ray diffraction (XRD) patterns of the ZnO clubs show clear peaks corresponding to wurtzite crystal phase of ZnO. Scanning electron microscopic (SEM) images show that each club has two opposite hexagonal faces (parts) of unequal dimensions. High resolution transmission electron microscopic (HR-TEM) image of a single ZnO club reveals that the ZnO is single crystalline and has wurtzite crystal structure; the image indicates a lattice spacing (d) of 0.26 nm; this is ascribed to the (002) planar spacing of the hexagonal ZnO. A solar-to-electricity conversion efficiency (η) of 3.36% is achieved for the cell with the double layer (DL) film, which is 16% higher than that of the cell with only transparent layer (TL) of commercial ZnO (2.89%) and far higher than that of the cell with SL (0.05%). The η of the cell with the DL (3.36%) could further be improved to 4.28% through the modification of the DL surface with TiO(x). Incident photo-to-current conversion efficiency (IPCE) curves, UV-vis absorption spectra, energy dispersive X-ray (EDX) spectra, and electrochemical impedance spectra (EIS) are also used to substantiate the results.

  8. [THE MODEL OF NEUROVASCULAR UNIT IN VITRO CONSISTING OF THREE CELLS TYPES].

    Science.gov (United States)

    Khilazheva, E D; Boytsova, E B; Pozhilenkova, E A; Solonchuk, Yu R; Salmina, A B

    2015-01-01

    There are many ways to model blood brain barrier and neurovascular unit in vitro. All existing models have their disadvantages, advantages and some peculiarities of preparation and usage. We obtained the three-cells neurovascular unit model in vitro using progenitor cells isolated from the rat embryos brain (Wistar, 14-16 d). After withdrawal of the progenitor cells the neurospheres were cultured with subsequent differentiation into astrocytes and neurons. Endothelial cells were isolated from embryonic brain too. During the differentiation of progenitor cells the astrocytes monolayer formation occurs after 7-9 d, neurons monolayer--after 10-14 d, endothelial cells monolayer--after 7 d. Our protocol for simultaneous isolation and cultivation of neurons, astrocytes and endothelial cells reduces the time needed to obtain neurovascular unit model in vitro, consisting of three cells types and reduce the number of animals used. It is also important to note the cerebral origin of all cell types, which is also an advantage of our model in vitro.

  9. Importance of unit cells in accurate evaluation of the characteristics of graphene

    Energy Technology Data Exchange (ETDEWEB)

    Sabzyan, Hassan; Sadeghpour, Narges [Isfahan Univ. (Iran, Islamic Republic of). Dept. of Chemistry

    2016-08-01

    Effects of the size of the unit cell on energy, atomic charges, and phonon frequencies of graphene at the Γ point of the Brillouin zone are studied in the absence and presence of an electric field using density functional theory (DFT) methods (LDA and DFT-PBE functionals with Goedecker-Teter-Hutter (GTH) and Troullier-Martins (TM) norm-conserving pseudopotentials). Two types of unit cells containing n{sub c}=4-28 carbon atoms are considered. Results show that stability of graphene increases with increasing size of the unit cell. Energy, atomic charges, and phonon frequencies all converge above n{sub c}=24 for all functional-pseudopotentials used. Except for the LDA-GTH calculations, application of an electric field of 0.4 and 0.9 V/nm strengths does not change the trends with the size of the unit cell but instead slightly decreases the binding energy of graphene. Results of this study show that the choice of unit cell size and type is critical for calculation of reliable characteristics of graphene.

  10. New photosensitizer with phenylenebisthiophene central unit and cyanovinylene 4-nitrophenyl terminal units for dye-sensitized solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Mikroyannidis, J.A., E-mail: mikroyan@chemistry.upatras.gr [Chemical Technology Laboratory, Department of Chemistry, University of Patras, GR-26500 Patras (Greece); Suresh, P. [Physics Department, Molecular Electronic and Optoelectronic Device Laboratory, JNV University, Jodhpur (Raj.) 342005 (India); Roy, M.S. [Defence Laboratory, Jodhpur (Raj.) 342011 (India); Sharma, G.D., E-mail: sharmagd_in@yahoo.com [Physics Department, Molecular Electronic and Optoelectronic Device Laboratory, JNV University, Jodhpur (Raj.) 342005 (India); R and D Centre for Engineering and Science, Jaipur Engineering College, Kukas, Jaipur (Raj.) (India)

    2011-06-30

    Graphical abstract: A novel dye D was synthesized and used as photosensitizer for quasi solid state dye-sensitized solar cells. A power conversion efficiency of 4.4% was obtained which was improved to 5.52% when diphenylphosphinic acid (DPPA) was added as coadsorbent. Display Omitted Highlights: > A new low band gap photosensitizer with cyanovinylene 4-nitrophenyl terminal units was synthesized. > A power conversion efficiency of 4.4% was obtained for the dye-sensitized solar cell based on this photosensitizer. > The power conversion efficiency of the dye-sensitized solar cell was further improved to 5.52% when diphenylphosphinic acid was added as coadsorbent. - Abstract: A new low band gap photosensitizer, D, which contains 2,2'-(1,4-phenylene) bisthiophene central unit and cyanovinylene 4-nitrophenyl terminal units at both sides was synthesized. The two carboxyls attached to the 2,5-positions of the phenylene ring act as anchoring groups. Dye D was soluble in common organic solvents, showed long-wavelength absorption maximum at 620-636 nm and optical band gap of 1.72 eV. The electrochemical parameters, i.e. the highest occupied molecular orbital (HOMO) (-5.1 eV) and the lowest unoccupied molecular orbital (LUMO) (-3.3 eV) energy levels of D show that this dye is suitable as molecular sensitizer. The quasi solid state dye-sensitized solar cell (DSSC) based on D shows a short circuit current (J{sub sc}) of 9.95 mA/cm{sup 2}, an open circuit voltage (V{sub oc}) of 0.70 V, and a fill factor (FF) of 0.64 corresponding to an overall power conversion efficiency (PCE) of 4.40% under 100 mW/cm{sup 2} irradiation. The overall PCE has been further improved to 5.52% when diphenylphosphinic acid (DPPA) coadsorbent is incorporated into the D solution. This increased PCE has been attributed to the enhancement in the electron lifetime and reduced recombination of injected electrons with the iodide ions present in the electrolyte with the use of DPPA as coadsorbant. The

  11. The Quantitative Criteria Based on the Fractal Dimensions, Entropy and Lacunarity for the Spatial Distribution of Cancer Cell Nuclei Enable Identification of Low or High Aggressive Prostate Carcinomas

    Directory of Open Access Journals (Sweden)

    Przemyslaw eWaliszewski

    2016-02-01

    Full Text Available Background: Tumor grading, PSA concentration, and stage determine a risk of prostate cancer patients with accuracy of about 70%. An approach based on the fractal geometrical model was proposed to eliminate subjectivity from the evaluation of tumor aggressiveness and to improve the prediction. This study was undertaken to validate classes of equivalence for the spatial distribution of cancer cell nuclei in a larger, independent set of prostate carcinomas.Methods: The global fractal capacity D0, information D1 and correlation D2 dimension, the local fractal dimension (LFD and the local connected fractal dimension (LCFD, Shannon entropy H and lacunarity were measured using computer algorithms in digitalized images of both the reference set (n = 60 and the test set (n = 208 of prostate carcinomas.Results: Prostate carcinomas were re-stratified into seven classes of equivalence. The cut-off D0 values 1.5450, 1.5820, 1.6270, 1.6490, 1.6980, 1.7640 defined the classes from C1 to C7, respectively. The other measures but the D1 failed to define the same classes of equivalence. The pairs (D0, LFD, (D0, H, (D0, , (D1, LFD, (D1, H, (D1,  characterized the spatial distribution of cancer cell nuclei in each class. The co-application of those measures enabled the subordination of prostate carcinomas to one out of three clusters associated with different tumor aggressiveness. For D0 0.8, the class C1 or C2 contains low complexity low aggressive carcinomas exclusively. For D0 > 1.6980, LFD > 1.7644, LCFD > 1.7051, H > 0.9, and < 0.7, the class C6 or C7 contains high complexity high aggressive carcinomas. Conclusions: The cut-off D0 values defining the classes of equivalence were validated in this study. The cluster analysis suggested that the number of the subjective Gleason grades and the number of the objective classes of equivalence could be decreased from seven to three without a loss of clinically relevant information. Two novel quantitative

  12. The Quantitative Criteria Based on the Fractal Dimensions, Entropy, and Lacunarity for the Spatial Distribution of Cancer Cell Nuclei Enable Identification of Low or High Aggressive Prostate Carcinomas.

    Science.gov (United States)

    Waliszewski, Przemyslaw

    2016-01-01

    Tumor grading, PSA concentration, and stage determine a risk of prostate cancer patients with accuracy of about 70%. An approach based on the fractal geometrical model was proposed to eliminate subjectivity from the evaluation of tumor aggressiveness and to improve the prediction. This study was undertaken to validate classes of equivalence for the spatial distribution of cancer cell nuclei in a larger, independent set of prostate carcinomas. The global fractal capacity D 0, information D 1 and correlation D 2 dimension, the local fractal dimension (LFD) and the local connected fractal dimension (LCFD), Shannon entropy H and lacunarity λ were measured using computer algorithms in digitalized images of both the reference set (n = 60) and the test set (n = 208) of prostate carcinomas. Prostate carcinomas were re-stratified into seven classes of equivalence. The cut-off D 0-values 1.5450, 1.5820, 1.6270, 1.6490, 1.6980, 1.7640 defined the classes from C1 to C7, respectively. The other measures but the D 1 failed to define the same classes of equivalence. The pairs (D 0, LFD), (D 0, H), (D 0, λ), (D 1, LFD), (D 1, H), (D 1, λ) characterized the spatial distribution of cancer cell nuclei in each class. The co-application of those measures enabled the subordination of prostate carcinomas to one out of three clusters associated with different tumor aggressiveness. For D 0 1.5, H 0.8, the class C1 or C2 contains low complexity low aggressive carcinomas exclusively. For D 0 > 1.6980, LFD > 1.7644, LCFD > 1.7051, H > 0.9, and λ < 0.7, the class C6 or C7 contains high complexity high aggressive carcinomas. The cut-off D 0-values defining the classes of equivalence were validated in this study. The cluster analysis suggested that the number of the subjective Gleason grades and the number of the objective classes of equivalence could be decreased from seven to three without a loss of clinically relevant information. Two novel quantitative criteria based on the complexity

  13. Prediction of stress-strain behavior of ceramic matrix composites using unit cell model

    Directory of Open Access Journals (Sweden)

    Suzuki Takuya

    2015-01-01

    Full Text Available In this study, the elastic modulus and the stress-strain curve of ceramic matrix composites (CMCs were predicted by using the unit cell model that consists of fiber bundles and matrix. The unit cell model was developed based on the observation of cross sections of CMCs. The elastic modulus of CMCs was calculated from the results of finite element analysis using the developed model. The non-linear behavior of stress-strain curve of CMCs was also predicted by taking the degradation of the elastic modulus into consideration, where the degradation was related to the experimentally measured crack density in CMCs. The approach using the unit cell model was applied to two kinds of CMCs, and good agreement was obtained between the experimental and the calculated results.

  14. Reduction in potassium concentration of stored red blood cell units using a resin filter.

    Science.gov (United States)

    Yamada, Chisa; Heitmiller, Eugenie S; Ness, Paul M; King, Karen E

    2010-09-01

    Hyperkalemia is a serious complication of rapid and massive blood transfusion due to high plasma potassium (K) in stored red blood cell (RBC) units. A potassium adsorption filter (PAF) was developed in Japan to remove K by exchanging with sodium (Na). We performed an in vitro evaluation of its efficacy and feasibility of use. Three AS-3 RBC units were filtered by each PAF using gravity; 10 PAFs were tested. Blood group, age, flow rate, and irradiation status were recorded. Total volume, K, Na, Cl, Mg, total Ca (tCa), RBC count, hemoglobin (Hb), hematocrit (Hct), and plasma Hb were measured before and after filtering each unit. Ionized Ca (iCa), pH, and glucose were measured for some units. After filtration, the mean decrease in K was 97.5% in the first RBC unit, 91.2% in the second unit, and 64.4% in the third unit. The mean increases in Na, Mg, and tCa were 33.0, 151.4, and 116.1%, respectively. iCa and pH remained low; glucose was unchanged. RBC count, Hb, and Hct decreased slightly after filtration of first units; plasma Hb was unchanged. After filtration, there was no visual evidence of increased hemolysis or clot formation. The PAF decreased K concentration in stored AS-3 RBC units to minimal levels in the first and second RBC units. Optimally, one filter could be used for 2 RBC units. Although Na increased, the level may not be clinically significant. PAF may be useful for at-risk patients receiving older units or blood that has been stored after gamma irradiation. © 2010 American Association of Blood Banks.

  15. Diffractive stacks of metamaterial lattices with a complex unit cell: Self-consistent long-range bianisotropic interactions in experiment and theory

    Science.gov (United States)

    Kwadrin, Andrej; Koenderink, A. Femius

    2014-01-01

    Metasurfaces and metamaterials promise arbitrary rerouting of light using two-dimensional (2D) planar arrangements of electric and magnetic scatterers, respectively, 3D stacks built out of such 2D planes. An important problem is how to self-consistently model the response of these systems in a manner that retains dipole intuition yet does full justice to the self-consistent multiple scattering via near-field and far-field retarded interactions. We set up such a general model for metamaterial lattices of complex 2D unit cells of poly-atomic basis as well as allowing for stacking in a third dimension. In particular, each scatterer is quantified by a magnetoelectric polarizability tensor and Ewald lattice summation deals with all near-field and long-range retarded electric, magnetic, and magnetoelectric couplings self-consistently. We show in theory and experiment that grating diffraction orders of dilute split ring lattices with complex unit cells show a background-free signature of magnetic dipole response. For denser lattices experiment and theory show that complex unit cells can reduce the apparent effect of bianisotropy, i.e., the strong oblique-incidence handed response that was reported for simple split ring lattices. Finally, the method is applied to calculate transmission of finite stacks of lattices. Thereby our simple methodology allows us to trace the emergence of effective material constants when building a 3D metamaterial layer by layer, as well as facilitating the design of metasurfaces.

  16. A Negative Index Metamaterial-Inspired UWB Antenna with an Integration of Complementary SRR and CLS Unit Cells for Microwave Imaging Sensor Applications

    Directory of Open Access Journals (Sweden)

    Mohammad Tariqul Islam

    2015-05-01

    Full Text Available This paper presents a negative index metamaterial incorporated UWB antenna with an integration of complementary SRR (split-ring resonator and CLS (capacitive loaded strip unit cells for microwave imaging sensor applications. This metamaterial UWB antenna sensor consists of four unit cells along one axis, where each unit cell incorporates a complementary SRR and CLS pair. This integration enables a design layout that allows both a negative value of permittivity and a negative value of permeability simultaneous, resulting in a durable negative index to enhance the antenna sensor performance for microwave imaging sensor applications. The proposed MTM antenna sensor was designed and fabricated on an FR4 substrate having a thickness of 1.6 mm and a dielectric constant of 4.6. The electrical dimensions of this antenna sensor are 0.20 λ × 0.29 λ at a lower frequency of 3.1 GHz. This antenna sensor achieves a 131.5% bandwidth (VSWR < 2 covering the frequency bands from 3.1 GHz to more than 15 GHz with a maximum gain of 6.57 dBi. High fidelity factor and gain, smooth surface-current distribution and nearly omni-directional radiation patterns with low cross-polarization confirm that the proposed negative index UWB antenna is a promising entrant in the field of microwave imaging sensors.

  17. On Universal Quantum Dimensions

    CERN Document Server

    Mkrtchyan, R L

    2016-01-01

    We derive universal expressions for quantum dimensions (universal characters) of some series of irreps of simple Lie algebras. This allows us to check Deligne's hypothesis on universal quantum dimensions for symmetric cube of adjoint representation.

  18. DIFFERENT DIMENSIONS OF TEAMS

    OpenAIRE

    Goparaju Purna SUDHAKAR

    2014-01-01

    Popularity of teams is growing in 21st Century. Organizations are getting their work done through different types of teams. Teams have proved that the collective performance is more than the sum of the individual performances. Thus, the teams have got different dimensions such as quantitative dimensions and qualitative dimensions. The Quantitative dimensions of teams such as team performance, team productivity, team innovation, team effectiveness, team efficiency, team decision making and tea...

  19. DIFFERENT DIMENSIONS OF TEAMS

    OpenAIRE

    Sudhakar, Goparaju Purna

    2013-01-01

    Popularity of teams is growing in 21st Century. Organizations are getting their work done through different types of teams. Teams have proved that the collective performance is more than the sum of the individual performances. Thus, the teams have got different dimensions such as quantitative dimensions and qualitative dimensions. The Quantitative dimensions of teams such as team performance, team productivity, team innovation, team effectiveness, team efficiency, team decision making and tea...

  20. Strongly Gorenstein Flat Dimensions

    Institute of Scientific and Technical Information of China (English)

    Chun Xia ZHANG; Li Min WANG

    2011-01-01

    This article is concerned with the strongly Gorenstein flat dimensions of modules and rings.We show this dimension has nice properties when the ring is coherent,and extend the well-known Hilbert's syzygy theorem to the strongly Gorenstein flat dimensions of rings.Also,we investigate the strongly Gorenstein flat dimensions of direct products of rings and (almost)excellent extensions of rings.

  1. High light-extraction-efficiency OLED based on photonic crystal slab structures with taper unit cells

    Institute of Scientific and Technical Information of China (English)

    YAN Rong-jin; WANG Qing-kang

    2006-01-01

    To improve the light-extraction-efficiency of OLED,we introduced PCS (Photonic Crystal Slab) structures into the interface of ITO layer and glass substrate.PCS structures with Taper unit cells are proved to be effective in reducing the energy of guided wave trapped in high refractive index material,and an increase of light-extraction-efficiency to 95.26% is gained.This enhancement is much greater than the traditional PCS with cylinder unit cells (60%-70%).Physical mechanisms of light-extraction-efficiency enhancement in these structures are further discussed.

  2. Investigation of IrO2/Pt Electrocatalysts in Unitized Regenerative Fuel Cells

    Directory of Open Access Journals (Sweden)

    V. Baglio

    2011-01-01

    Full Text Available IrO2/Pt catalysts (at different concentrations were synthesized by incipient wetness technique and characterized by XRD, XRF, and SEM. Water electrolysis/fuel cell performances were evaluated in a 5 cm2 single cell under Unitized Regenerative Fuel Cell (URFC configuration. The IrO2/Pt composition of 14/86 showed the highest performance for water electrolysis and the lowest one as fuel cell. It is derived that for fuel cell operation an excess of Pt favours the oxygen reduction process whereas IrO2 promotes oxygen evolution. From the present results, it appears that the diffusion characteristics and the reaction rate in fuel cell mode are significantly lower than in the electrolyser mode. This requires the enhancement of the gas diffusion properties of the electrodes and the catalytic properties for cathode operation in fuel cells.

  3. Water proton configurations in structures I, II, and H clathrate hydrate unit cells.

    Science.gov (United States)

    Takeuchi, Fumihito; Hiratsuka, Masaki; Ohmura, Ryo; Alavi, Saman; Sum, Amadeu K; Yasuoka, Kenji

    2013-03-28

    Position and orientation of water protons need to be specified when the molecular simulation studies are performed for clathrate hydrates. Positions of oxygen atoms in water are experimentally determined by X-ray diffraction analysis of clathrate hydrate structures, but positions of water hydrogen atoms in the lattice are disordered. This study reports a determination of the water proton coordinates in unit cell of structure I (sI), II (sII), and H (sH) clathrate hydrates that satisfy the ice rules, have the lowest potential energy configuration for the protons, and give a net zero dipole moment. Possible proton coordinates in the unit cell were chosen by analyzing the symmetry of protons on the hexagonal or pentagonal faces in the hydrate cages and generating all possible proton distributions which satisfy the ice rules. We found that in the sI and sII unit cells, proton distributions with small net dipole moments have fairly narrow potential energy spreads of about 1 kJ∕mol. The total Coulomb potential on a test unit charge placed in the cage center for the minimum energy∕minimum dipole unit cell configurations was calculated. In the sI small cages, the Coulomb potential energy spread in each class of cage is less than 0.1 kJ∕mol, while the potential energy spread increases to values up to 6 kJ∕mol in sH and 15 kJ∕mol in the sII cages. The guest environments inside the cages can therefore be substantially different in the sII case. Cartesian coordinates for oxygen and hydrogen atoms in the sI, sII, and sH unit cells are reported for reference.

  4. Culture of human cells in experimental units for spaceflight impacts on their behavior.

    Science.gov (United States)

    Cazzaniga, Alessandra; Moscheni, Claudia; Maier, Jeanette Am; Castiglioni, Sara

    2017-05-01

    Because space missions produce pathophysiological alterations such as cardiovascular disorders and bone demineralization which are very common on Earth, biomedical research in space is a frontier that holds important promises not only to counterbalance space-associated disorders in astronauts but also to ameliorate the health of Earth-bound population. Experiments in space are complex to design. Cells must be cultured in closed cell culture systems (from now defined experimental units (EUs)), which are biocompatible, functional, safe to minimize any potential hazard to the crew, and with a high degree of automation. Therefore, to perform experiments in orbit, it is relevant to know how closely culture in the EUs reflects cellular behavior under normal growth conditions. We compared the performances in these units of three different human cell types, which were recently space flown, i.e. bone mesenchymal stem cells, micro- and macrovascular endothelial cells. Endothelial cells are only slightly and transiently affected by culture in the EUs, whereas these devices accelerate mesenchymal stem cell reprogramming toward osteogenic differentiation, in part by increasing the amounts of reactive oxygen species. We conclude that cell culture conditions in the EUs do not exactly mimic what happens in a culture dish and that more efforts are necessary to optimize these devices for biomedical experiments in space. Impact statement Cell cultures represent valuable preclinical models to decipher pathogenic circuitries. This is true also for biomedical research in space. A lot has been learnt about cell adaptation and reaction from the experiments performed on many different cell types flown to space. Obviously, cell culture in space has to meet specific requirements for the safety of the crew and to comply with the unique environmental challenges. For these reasons, specific devices for cell culture in space have been developed. It is important to clarify whether these

  5. Dimensions of Creative Evaluation

    DEFF Research Database (Denmark)

    Christensen, Bo; Ball, Linden J.

    2016-01-01

    We examined evaluative reasoning taking place during expert ‘design critiques’. We focused on key dimensions of creative evaluation (originality, functionality and aesthetics) and ways in which these dimensions impact reasoning strategies and suggestions offered by experts for how the student could...... continue. Each dimension was associated with a specific underpinning ‘logic’ determining how these dimensions were evaluated in practice. Our analysis clarified how these dimensions triggered reasoning strategies such as running mental simulations or making design suggestions, ranging from ‘go...

  6. Theoretical Dimensions of Small Unit Resilience

    Science.gov (United States)

    2010-12-01

    in which the flag-draped coffins of those who have paid the ultimate sacrifice are driven down Disney Drive (the longest road on the base) in a HMMWV...personality trait (Sutcliffe & Vogus, 2003, p. 100). This expansion too, resulted in several differing views and definitions of resilience (Altman

  7. Introduction to Geometric Dimensioning and Tolerancing.

    Science.gov (United States)

    Proebstle, Donald C.

    Intended for drafting students in engineering drawing classes, the text provides basic definitions and explanations, as well as sample illustrations to be used as guides in dimensioning class projects by this technique. The content is divided into three units plus an appendix. Unit 1 discusses basic concepts, including the importance of the…

  8. Problems with Generalising: Pythagoras in N Dimensions

    Science.gov (United States)

    Foster, Colin

    2013-01-01

    Pythagoras' theorem in two and three dimensions appears in General Mathematics, Units 1-2, section 6 (Geometry and trigonometry: Shape and measurement) in the Victorian Certificate of Education Mathematics Study Design (Victorian Curriculum Assessment Authority, 2010). It also comes in Further Mathematics, Units 3-4 (Applications: Geometry and…

  9. Teaching Basic Science Environmentally, The Concept: The cell is basic unit of structure of most organisms.

    Science.gov (United States)

    Busch, Phyllis S.

    1985-01-01

    Suggests simple ways to introduce students to the concept that the cell is the basic unit of structure of most organisms. Mentions materials for microscope study that are readily available and easy to handle, e.g., membranes from between the scales of the onion bulb, thin-leaved plants, pond water, and pollen. (JHZ)

  10. 3D-Printing Crystallographic Unit Cells for Learning Materials Science and Engineering

    Science.gov (United States)

    Rodenbough, Philip P.; Vanti, William B.; Chan, Siu-Wai

    2015-01-01

    Introductory materials science and engineering courses universally include the study of crystal structure and unit cells, which are by their nature highly visual 3D concepts. Traditionally, such topics are explored with 2D drawings or perhaps a limited set of difficult-to-construct 3D models. The rise of 3D printing, coupled with the wealth of…

  11. Predication of Plastic Flow Characteristics in Ferrite/Pearlite Steel Using a Fern Unit Cell Method

    Institute of Scientific and Technical Information of China (English)

    Hong Li; Jingtao Han; Jing Liu; Lv Zhang

    2004-01-01

    The flow stress of ferrite/pearlite steel under uni-axial tension was simulated with finite element method (FEM) by applying commercial software MARC/MENTAT. Flow stress curves of ferrite/pearlite steels were calculated based on unit cell model. The effects of volume fraction, distribution and the aspect ratio of pearlite on tensile properties have been investigated.

  12. 3D-Printing Crystallographic Unit Cells for Learning Materials Science and Engineering

    Science.gov (United States)

    Rodenbough, Philip P.; Vanti, William B.; Chan, Siu-Wai

    2015-01-01

    Introductory materials science and engineering courses universally include the study of crystal structure and unit cells, which are by their nature highly visual 3D concepts. Traditionally, such topics are explored with 2D drawings or perhaps a limited set of difficult-to-construct 3D models. The rise of 3D printing, coupled with the wealth of…

  13. Mitigation of Unwanted Forward Narrow-band Radiation from PCBs with a Metamaterial Unit Cell

    DEFF Research Database (Denmark)

    Ruaro, Andrea; Thaysen, Jesper; Jakobsen, Kaj Bjarne

    2013-01-01

    Mitigation of EMI from a PCB is obtained through the use of a metamaterial unit cell. The focus is on the reduction of narrow-band radiation in the forward hemisphere when the resonant element is etched on a layer located between the source of radiation and the ground plane. As opposed to previou...

  14. Recovery Act. Solid Oxide Fuel Cell Diesel Auxilliary Power Unit Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Geiger, Gail E. [Delphi Automotive Systems, LLC., Gillingham (United Kingdom)

    2013-09-30

    Solid Oxide Fuel Cell Diesel Auxilliary Power Unit Demonstration Project. Summarizing development of Delphi’s next generation SOFC system as the core power plant to prove the viability of the market opportunity for a 3-5 kW diesel SOFC system. Report includes test and demonstration results from testing the diesel APU in a high visibility fleet customer vehicle application.

  15. Experimental broadband absorption enhancement in silicon nanohole structures with optimized complex unit cells.

    Science.gov (United States)

    Lin, Chenxi; Martínez, Luis Javier; Povinelli, Michelle L

    2013-09-09

    We design silicon membranes with nanohole structures with optimized complex unit cells that maximize broadband absorption. We fabricate the optimized design and measure the optical absorption. We demonstrate an experimental broadband absorption about 3.5 times higher than an equally-thick thin film.

  16. Inulin isoforms differ by repeated additions of one crystal unit cell.

    Science.gov (United States)

    Cooper, Peter D; Barclay, Thomas G; Ginic-Markovic, Milena; Gerson, Andrea R; Petrovsky, Nikolai

    2014-03-15

    Inulin isoforms, especially delta inulin, are important biologically as immune activators and clinically as vaccine adjuvants. In exploring action mechanisms, we previously found regular increments in thermal properties of the seven-member inulin isoform series that suggested regular additions of some energetic structural unit. Because the previous isolates carried additional longer chains that masked defining ranges, these were contrasted with new isoform isolates comprising only inulin chain lengths defining that isoform. The new series began with 19 fructose units per chain (alpha-1 inulin), increasing regularly by 6 fructose units per isoform. Thus the 'energetic unit' equates to 6 fructose residues per chain. All isoforms showed indistinguishable X-ray diffraction patterns that were also identical with known inulin crystals. We conclude that an 'energetic unit' equates to one helix turn of 6 fructose units per chain as found in one unit cell of the inulin crystal. Each isoform chain comprised progressively more helix turns plus one additional fructose and glucose residues per chain.

  17. Question 7: the first units of life were not simple cells.

    Science.gov (United States)

    Norris, Vic; Hunding, Axel; Kepes, Francois; Lancet, Doron; Minsky, Abraham; Raine, Derek; Root-Bernstein, Robert; Sriram, K

    2007-10-01

    Five common assumptions about the first cells are challenged by the pre-biotic ecology model and are replaced by the following propositions: firstly, early cells were more complex, more varied and had a greater diversity of constituents than modern cells; secondly, the complexity of a cell is not related to the number of genes it contains, indeed, modern bacteria are as complex as eukaryotes; thirdly, the unit of early life was an 'ecosystem' rather than a 'cell'; fourthly, the early cell needed no genes at all; fifthly, early life depended on non-covalent associations and on catalysts that were not confined to specific reactions. We present here the outlines of a theory that connects findings about modern bacteria with speculations about their origins.

  18. A heated vapor cell unit for dichroic atomic vapor laser lock in atomic rubidium.

    Science.gov (United States)

    McCarron, Daniel J; Hughes, Ifan G; Tierney, Patrick; Cornish, Simon L

    2007-09-01

    The design and performance of a compact heated vapor cell unit for realizing a dichroic atomic vapor laser lock (DAVLL) for the D(2) transitions in atomic rubidium is described. A 5 cm long vapor cell is placed in a double-solenoid arrangement to produce the required magnetic field; the heat from the solenoid is used to increase the vapor pressure and correspondingly the DAVLL signal. We have characterized experimentally the dependence of important features of the DAVLL signal on magnetic field and cell temperature. For the weaker transitions both the amplitude and gradient of the signal are increased by an order of magnitude.

  19. Manipulation of programmed cell death in xylogenic Zinnia elegans suspension cell cultures influences the kinetics and dimensions of tracheary elements produced

    NARCIS (Netherlands)

    Twumasi, P.; Woltering, E.J.; Ieperen, van W.; Emons, A.M.C.

    2006-01-01

    Programmed cell death (PCD) plays an important role during developmental and defense processes in plants. One specific developmental process is the formation of xylem vessels which mainly consist of fused dead, hollow cells called vessel or tracheary elements (TE). These elements are composed of

  20. User Experience Dimensions

    DEFF Research Database (Denmark)

    Lykke, Marianne; Jantzen, Christian

    2016-01-01

    The present study develops a set of 10 dimensions based on a systematic understanding of the concept of experience as a holistic psychological. Seven of these are derived from a psychological conception of what experiencing and experiences are. Three supplementary dimensions spring from...... the observation that experiences apparently have become especially valuable phenomena in Western societies. The 10 dimensions are tried out in a field study at the Center for Art and Media (ZKM) in Germany with the purpose to study their applicability in the evaluation of interactive sound archives. 29 walk......-alongs were carried out with 58 museums visitors. Our analysis showed that it was possible to identify the 10 experience dimensions in the study material. Some dimensions were expressed more frequently than others. The distribution of expressed dimensions and the content of the user comments provided a clear...

  1. Hollow dimension of modules

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    In this paper, we are interested in the following general question: Given a module Mwhich has finite hollow dimension and which has a finite collection of submodules Ki (1≤i≤n) such that M=K1+... +Kn, can we find an expression for the hollow dimension of Min terms of hollow dimensions of modules built up in some way from K1 Kn? We prove the following theorem:Let Mbe an amply supplemented module having finite hollow dimension and let Ki (1≤i≤n) be a finite collection of submodules of Msuch that M=K1+...+Kn. Then the hollow dimension h(M) of Mis the sum of the hollow dimensions of Ki (1≤i≤n) ifand only if Ki is a supplement of K1+...+Ki-1+Ki+1+...+Kn in Mfor each 1≤i≤n.

  2. Dimension of linear models

    DEFF Research Database (Denmark)

    Høskuldsson, Agnar

    1996-01-01

    Determination of the proper dimension of a given linear model is one of the most important tasks in the applied modeling work. We consider here eight criteria that can be used to determine the dimension of the model, or equivalently, the number of components to use in the model. Four...... the basic problems in determining the dimension of linear models. Then each of the eight measures are treated. The results are illustrated by examples....

  3. A switchable pH-differential unitized regenerative fuel cell with high performance

    Science.gov (United States)

    Lu, Xu; Xuan, Jin; Leung, Dennis Y. C.; Zou, Haiyang; Li, Jiantao; Wang, Hailiang; Wang, Huizhi

    2016-05-01

    Regenerative fuel cells are a potential candidate for future energy storage, but their applications are limited by the high cost and poor round-trip efficiency. Here we present a switchable pH-differential unitized regenerative fuel cell capable of addressing both the obstacles. Relying on a membraneless laminar flow-based design, pH environments in the cell are optimized independently for different electrode reactions and are switchable together with the cell process to ensure always favorable thermodynamics for each electrode reaction. Benefiting from the thermodynamic advantages of the switchable pH-differential arrangement, the cell allows water electrolysis at a voltage of 0.57 V, and a fuel cell open circuit voltage of 1.89 V, rendering round-trip efficiencies up to 74%. Under room conditions, operating the cell in fuel cell mode yields a power density of 1.3 W cm-2, which is the highest performance to date for laminar flow-based cells and is comparable to state-of-the-art polymer electrolyte membrane fuel cells.

  4. Multiple dimensions of performance

    NARCIS (Netherlands)

    Torenvlied, René

    2013-01-01

    This presentation considers the multiple dimensions of performance in performance studies, and potentially contradicting effects of different management strategies on separate indicators of performance

  5. Dimension of Physical Space

    Directory of Open Access Journals (Sweden)

    Quznetsov G.

    2014-10-01

    Full Text Available Each vector of state has its own corresponing element of the CayleyDickson algebra. Properties of a state vector require that this algebra was a normalized division algebra. By the Hurwitz and Frobenius theorems maximal dimension of s uch algebra is 8. Con- sequently, a dimension of corresponding complex state vectors is 4, and a dimension of the Clifford set elements is 4 × 4. Such set contains 5 matrices — among them — 3-diagonal. Hence, a dimension of the dot events space is equal to 3 + 1.

  6. A fuel cell energy storage system concept for the Space Station Freedom Extravehicular Mobility Unit

    Science.gov (United States)

    Adlhart, Otto J.; Rosso, Matthew J., Jr.; Marmolejo, Jose

    1989-01-01

    An update is given on work to design and build a Fuel Cell Energy Storage System (FCESS) bench-tested unit for the Space Station Freedom Extravehicular Mobility Unit (EMU). Fueled by oxygen and hydride-stored hydrogen, the FCESS is being considered as an alternative to the EMU zinc-silver oxide battery. Superior cycle life and quick recharge are the main attributes of FCESS. The design and performance of a nonventing, 28 V, 34 Ahr system with 7 amp rating are discussed.

  7. Single-unit transfusions and hemoglobin trigger: relative impact on red cell utilization.

    Science.gov (United States)

    Yang, William W; Thakkar, Rajiv N; Gehrie, Eric A; Chen, Weiyun; Frank, Steven M

    2017-05-01

    Patient blood management (PBM) programs can reduce unnecessary transfusions, but the optimal methods used to achieve this effect are unclear. We tested the hypothesis that encouraging single-unit red blood cell (RBC) transfusions in stable patients would have a greater impact on blood use than compliance with a specific hemoglobin (Hb) transfusion trigger alone. We analyzed blood utilization data at three community hospitals without previous PBM efforts before and after implementing a PBM program. Data were analyzed at monthly intervals to determine the relative impact of a "Why give 2 when 1 will do?" campaign promoting single-unit RBC transfusions and simultaneous efforts to promote evidence-based Hb triggers of 7 or 8 g/dL. Univariate and multivariate analyses were used to identify independent effects of these two interventions on overall RBC utilization. Univariate analysis revealed that both the increase in single-unit transfusions (from 38.0% to 70.9%; p utilization. Multivariate analysis showed that the increase in single-unit transfusions was an independent predictor of decreased RBC utilization, but the Hb triggers of both 7 and 8 g/dL were not. Overall, our PBM efforts decreased RBC utilization from 0.254 to 0.185 units/patient (27.2%) across all three hospitals (p = 0.0009). A campaign promoting single-unit RBC transfusions had a greater impact on RBC utilization than did encouraging a restrictive transfusion trigger. © 2016 AABB.

  8. The Daniell Cell, Ohm's Law and the Emergence of the International System of Units

    CERN Document Server

    Jayson, Joel S

    2015-01-01

    Telegraphy originated in the 1830s and 40s and flourished in the following decades, but with a patchwork of electrical standards. Electromotive force was for the most part measured in units of the predominant Daniell cell. Each company had their own resistance standard. In 1862 the British Association for the Advancement of Science formed a committee to address this situation. By 1873 they had given definition to the electromagnetic system of units (emu) and defined the practical units of the ohm as ${10}^9$ emu units of resistance and the volt as ${10}^8$ emu units of electromotive force. These recommendations were ratified and expanded upon in a series of international congresses held between 1881 and 1904. A proposal by Giovanni Giorgi in 1901 took advantage of a coincidence between the conversion of the units of energy in the emu system (the erg) and in the practical system (the joule) in that the same conversion factor existed between the cgs based emu system and a theretofore undefined MKS system. By in...

  9. THE DISTRIBUTIONAL DIMENSION OF FRACTALS

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In the book [1] H.Triebel introduces the distributional dimension of fractals in and distributional dimension, respectively. Thus we might say that the distributional dimension is an analytical definition for Hausdorff dimension. Therefore we can study Hausdorff dimension through the distributional dimension analytically.By discussing the distributional dimension, this paper intends to set up a criterion for estimating the upper and lower bounds of Hausdorff dimension analytically. Examples illustrating the criterion are included in the end.

  10. Dimensions of patient safety culture in family practice.

    Science.gov (United States)

    Palacios-Derflingher, Luz; O'Beirne, Maeve; Sterling, Pam; Zwicker, Karen; Harding, Brianne K; Casebeer, Ann

    2010-01-01

    Safety culture has been shown to affect patient safety in healthcare. While the United States and United Kingdom have studied the dimensions that reflect patient safety culture in family practice settings, to date, this has not been done in Canada. Differences in the healthcare systems between these countries and Canada may affect the dimensions found to be relevant here. Thus, it is important to identify and compare the dimensions from the United States and the United Kingdom in a Canadian context. The objectives of this study were to explore the dimensions of patient safety culture that relate to family practice in Canada and to determine if differences and similarities exist between dimensions found in Canada and those found in previous studies undertaken in the United States and the United Kingdom. A qualitative study was undertaken applying thematic analysis using focus groups with family practice offices and supplementary key stakeholders. Analysis of the data indicated that most of the dimensions from the United States and United Kingdom are appropriate in our Canadian context. Exceptions included owner/managing partner/leadership support for patient safety, job satisfaction and overall perceptions of patient safety and quality. Two unique dimensions were identified in the Canadian context: disclosure and accepting responsibility for errors. Based on this early work, it is important to consider differences in care settings when understanding dimensions of patient safety culture. We suggest that additional research in family practice settings is critical to further understand the influence of context on patient safety culture.

  11. Regulations in the United States for cell transplantation clinical trials in neurological diseases

    Institute of Scientific and Technical Information of China (English)

    He Zhu; Yuanqing Tan; Qi Gu; Weifang Han; Zhongwen Li; Jason S Meyer; Baoyang Hu

    2015-01-01

    Objective: This study aimed to use a systematic approach to evaluate the current utilization, safety, and effectiveness of cell therapies for neurological diseases in human. And review the present regulations, considering United States (US) as a representative country, for cell transplantation in neurological disease and discuss the challenges facing the field of neurology in the coming decades. Methods:A detailed search was performed in systematic literature reviews of cellular‐based therapies in neurological diseases, using PubMed, web of science, and clinical trials. Regulations of cell therapy products used for clinical trials were searched from the Food and Drug Administration (FDA) and the National Institutes of Health (NIH). Results: Seven most common types of cell therapies for neurological diseases have been reported to be relatively safe with varying degrees of neurological recovery. And a series of regulations in US for cellular therapy was summarized including preclinical evaluations, sourcing material, stem cell manufacturing and characterization, cell therapy product, and clinical trials. Conclusions:Stem cell‐based therapy holds great promise for a cure of such diseases and will value a growing population of patients. However, regulatory permitting activity of the US in the sphere of stem cells, technologies of regenerative medicine and substitutive cell therapy are selective, theoretical and does not fit the existing norm and rules. Compiled well‐defined regulations to guide the application of stem cell products for clinical trials should be formulated.

  12. User Experience Dimensions

    DEFF Research Database (Denmark)

    Lykke, Marianne; Jantzen, Christian

    2016-01-01

    The present study develops a set of 10 dimensions based on a systematic understanding of the concept of experience as a holistic psychological. Seven of these are derived from a psychological conception of what experiencing and experiences are. Three supplementary dimensions spring from the obser...

  13. Gorenstein homological dimensions

    DEFF Research Database (Denmark)

    Holm, Henrik Granau

    2004-01-01

    In basic homological algebra, the projective, injective and 2at dimensions of modules play an important and fundamental role. In this paper, the closely related Gorenstein projective, Gorenstein injective and Gorenstein 2at dimensions are studied. There is a variety of nice results about Gorenstein...

  14. Gorenstein homological dimensions

    DEFF Research Database (Denmark)

    Holm, Henrik Granau

    2004-01-01

    In basic homological algebra, the projective, injective and 2at dimensions of modules play an important and fundamental role. In this paper, the closely related Gorenstein projective, Gorenstein injective and Gorenstein 2at dimensions are studied. There is a variety of nice results about Gorenstein...

  15. Fuel cell collaboration in the United States. Follow up report to the Danish Partnership for Hydrogen and Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-01-15

    Fuel cell technology continues to grow in the United States, with strong sales in stationary applications and early markets such as data centers, materials handling equipment, and telecommunications sites. New fuel cell customers include Fortune 500 companies Apple, eBay, Coca-Cola, and Walmart, who will use fuel cells to provide reliable power to data centers, stores, and facilities. Some are purchasing multi-megawatt (MW) systems, including three of the largest non-utility purchases of stationary fuel cells in the world by AT and T, Apple and eBay - 17 MW, 10 MW and 6 MW respectively. Others are replacing fleets of battery forklifts with fuel cells. Sysco, the food distributor, has more than 700 fuel cell-powered forklifts operating at seven facilities, with more on order. Mega-retailer Walmart now operates more than 500 fuel cell forklifts at three warehouses, including a freezer facility. Although federal government budget reduction efforts are impacting a wide range of departments and programs, fuel cell and hydrogen technology continues to be funded, albeit at a lower level than in past years. The Department of Energy (DOE) is currently funding fuel cell and hydrogen R and D and has nearly 300 ongoing projects at companies, national labs, and universities/institutes universities. The American Recovery and Reinvestment Act (ARRA) of 2009 and DOE's Market Transformation efforts have acted as a government ''catalyst'' for market success of emerging technologies. Early market deployments of about 1,400 fuel cells under the ARRA have led to more than 5,000 additional fuel cell purchases by industry with no DOE funding. In addition, interest in Congress remains high. Senators Richard Blumenthal (D-CT), Chris Coons (D-DE), Lindsey Graham (R-SC) and John Hoeven (R-ND) re-launched the bipartisan Senate Fuel Cell and Hydrogen Caucus in August 2012 to promote the continued development and commercialization of hydrogen and fuel cell technologies

  16. Study on Unit Cell Models and the Effective Thermal Conductivities of Silica Aerogel.

    Science.gov (United States)

    Liu, He; Li, Zeng-Yao; Zhao, Xin-Peng; Tao, Wen-Quan

    2015-04-01

    In this paper, two modified unit cell models, truncated octahedron and cubic array of intersecting square rods with 45-degree rotation, are developed in consideration of the tortuous path of heat conduction in solid skeleton of silica aerogel. The heat conduction is analyzed for each model and the expressions of effective thermal conductivity of the modified unit cell models are derived. Considering the random microstructure of silica aerogel, the probability model is presented. We also discuss the effect of the thermal conductivity of aerogel backbone. The effective thermal conductivities calculated by the proposed probability model are in good agreement with available experimental data when the density of the aerogel is 110 kg/m3.

  17. On the Performance of Hybrid PV/Unitized Regenerative Fuel Cell System in the Tropics

    Directory of Open Access Journals (Sweden)

    Salwan Dihrab

    2012-01-01

    Full Text Available Solar hydrogen system is a unique power system that can meet the power requirements for future energy demands. Such a system uses the hydrogen as the energy carrier, which produces energy through the electrolyzer with assistance of the power from the PV during the sunny hours, and then uses stored hydrogen to produce energy through the fuel cell after sunset or on cloudy days. The current study has used premanufactured unitized regenerative fuel cells in which the electrolyzer and the fuel cell function within one cell at different modes. The system components were modeled and the one-day real operational and simulated data has been presented and compared. The measured results showed the ability of the system to meet the proposed load, and the total efficiency was about 4.5%.

  18. Dielectric Behavior of Low Microwave Loss Unit Cell for All Dielectric Metamaterial

    Directory of Open Access Journals (Sweden)

    Tianhuan Luo

    2015-01-01

    Full Text Available With a deep study of the metamaterial, its unit cells have been widely extended from metals to dielectrics. The dielectric based unit cells attract much attention because of the advantage of easy preparation, tunability, and higher frequency response, and so forth. Using the conventional solid state method, we prepared a kind of incipient ferroelectrics (calcium titanate, CaTiO3 with higher microwave permittivity and lower loss, which can be successfully used to construct metamaterials. The temperature and frequency dependence of dielectric constant are also measured under different sintering temperatures. The dielectric spectra showed a slight permittivity decrease with the increase of temperature and exhibited a loss of 0.0005, combined with a higher microwave dielectric constant of ~167 and quality factor Q of 2049. Therefore, CaTiO3 is a kind of versatile and potential metamaterial unit cell. The permittivity of CaTiO3 at higher microwave frequency was also examined in the rectangular waveguide and we got the permittivity of 165, creating a new method to test permittivity at higher microwave frequency.

  19. The Quantitative Criteria Based on the Fractal Dimensions, Entropy, and Lacunarity for the Spatial Distribution of Cancer Cell Nuclei Enable Identification of Low or High Aggressive Prostate Carcinomas

    National Research Council Canada - National Science Library

    Waliszewski, Przemyslaw

    2016-01-01

    ...) and the local connected fractal dimension (LCFD), Shannon entropy H and lacunarity λ were measured using computer algorithms in digitalized images of both the reference set (n = 60) and the test set (n = 208...

  20. Dimensions of Openness

    DEFF Research Database (Denmark)

    Dalsgaard, Christian; Thestrup, Klaus

    2015-01-01

    as a matter of engaging educational activities in sociocultural practices of a surrounding society. Openness is not only a matter of opening up the existing, but of developing new educational practices that interact with society. The paper outlines three pedagogical dimensions of openness: transparency...... practices. Openness as joint engagement in the world aims at establishing interdependent collaborative relationships between educational institutions and external practices. To achieve these dimensions of openness, educational activities need to change and move beyond the course as the main format...... for openness. With examples from a university case, the paper discusses how alternative pedagogical formats and educational technologies can support the three dimensions of openness....

  1. The fourth dimension

    CERN Document Server

    Rucker, Rudy

    2014-01-01

    ""This is an invigorating book, a short but spirited slalom for the mind."" - Timothy Ferris, The New York Times Book Review ""Highly readable. One is reminded of the breadth and depth of Hofstadter's Gödel, Escher, Bach."" - Science""Anyone with even a minimal interest in mathematics and fantasy will find The Fourth Dimension informative and mind-dazzling... [Rucker] plunges into spaces above three with a zest and energy that is breathtaking."" - Martin Gardner ""Those who think the fourth dimension is nothing but time should be encouraged to read The Fourth Dimension, along with anyone else

  2. DIFFERENT DIMENSIONS OF TEAMS

    Directory of Open Access Journals (Sweden)

    Goparaju Purna SUDHAKAR

    2014-01-01

    Full Text Available Popularity ofteams is growing in 21st Century. Organizations are getting theirwork done through different types of teams. Teams have proved that thecollective performance is more than the sum of the individual performances.Thus, the teams have got different dimensions such as quantitative dimensionsand qualitative dimensions. The Quantitative dimensions of teams such as teamperformance, team productivity, team innovation, team effectiveness, teamefficiency, team decision making and team conflicts and Qualitative dimensionsof teams such as team communication, team coordination, team cooperation, teamcohesion, team climate, team creativity, team leadership and team conflictshave been discussed in this article.

  3. Dimension control of Superradiance

    Science.gov (United States)

    Hill, Tyler; Hui Deng Collaboration; Barry C. Sanders Collaboration

    2016-05-01

    We develop a theory for quantum dipole-dipole coupling when the electromagnetic fields are confined to an open line, open plane, or open space, commensurate with experimental capability for collective atomic effects subject to dimensional confinement. Our mathematical model naturally interpolates for all real dimension between one dimension for the line to three dimensions for open space. We show how superradiant emission can be controlled by dimensional confinement, including near-field and dipole-orientation effects, and we propose a two-dimensional confinement experiment to test our theory's efficacy. University of Michigan.

  4. Herd management and social variables associated with bulk tank somatic cell count in dairy herds in the eastern United States.

    Science.gov (United States)

    Schewe, R L; Kayitsinga, J; Contreras, G A; Odom, C; Coats, W A; Durst, P; Hovingh, E P; Martinez, R O; Mobley, R; Moore, S; Erskine, R J

    2015-11-01

    The ability to reduce somatic cell counts (SCC) and improve milk quality depends on the effective and consistent application of established mastitis control practices. The US dairy industry continues to rely more on nonfamily labor to perform critical tasks to maintain milk quality. Thus, it is important to understand dairy producer attitudes and beliefs relative to management practices, as well as employee performance, to advance milk quality within the changing structure of the dairy industry. To assess the adoption rate of mastitis control practices in United States dairy herds, as well as assess social variables, including attitudes toward employees relative to mastitis control, a survey was sent to 1,700 dairy farms in Michigan, Pennsylvania, and Florida in January and February of 2013. The survey included questions related to 7 major areas: sociodemographics and farm characteristics, milking proficiency, milking systems, cow environment, infected cow monitoring and treatment, farm labor, and attitudes toward mastitis and related antimicrobial use. The overall response rate was 41% (21% in Florida, 39% in Michigan, and 45% in Pennsylvania). Herd size ranged from 9 to 5,800 cows. Self-reported 3-mo geometric mean bulk tank SCC (BTSCC) for all states was 194,000 cells/mL. Multivariate analysis determined that proven mastitis control practices such as the use of internal teat sealants and blanket dry cow therapy, and not using water during udder preparation before milking, were associated with lower BTSCC. Additionally, farmer and manager beliefs and attitudes, including the perception of mastitis problems and the threshold of concern if BTSCC is above 300,000 cells/mL, were associated with BTSCC. Ensuring strict compliance with milking protocols, giving employees a financial or other penalty if BTSCC increased, and a perceived importance of reducing labor costs were negatively associated with BTSCC in farms with nonfamily employees. These findings highlight the

  5. Major design issues of molten carbonate fuel cell power generation unit

    Energy Technology Data Exchange (ETDEWEB)

    Chen, T.P.

    1996-04-01

    In addition to the stack, a fuel cell power generation unit requires fuel desulfurization and reforming, fuel and oxidant preheating, process heat removal, waste heat recovery, steam generation, oxidant supply, power conditioning, water supply and treatment, purge gas supply, instrument air supply, and system control. These support facilities add considerable cost and system complexity. Bechtel, as a system integrator of M-C Power`s molten carbonate fuel cell development team, has spent substantial effort to simplify and minimize these supporting facilities to meet cost and reliability goals for commercialization. Similiar to other fuels cells, MCFC faces design challenge of how to comply with codes and standards, achieve high efficiency and part load performance, and meanwhile minimize utility requirements, weight, plot area, and cost. However, MCFC has several unique design issues due to its high operating temperature, use of molten electrolyte, and the requirement of CO2 recycle.

  6. EF & den sociale dimension

    DEFF Research Database (Denmark)

    Due, Jesper Jørgen; Madsen, Jørgen Steen; Jensen, Carsten Strøby

    En analyse af EU's institutioner og udviklingen af den sociale dimension i forbindelse med etbaleringen af det indre marked med særlig henblik på effekterne på det danske aftalesystem.......En analyse af EU's institutioner og udviklingen af den sociale dimension i forbindelse med etbaleringen af det indre marked med særlig henblik på effekterne på det danske aftalesystem....

  7. Cell phone recycling experiences in the United States and potential recycling options in Brazil.

    Science.gov (United States)

    Silveira, Geraldo T R; Chang, Shoou-Yuh

    2010-11-01

    This paper presents an overview of cell phone recycling programs currently available in the United States. At the same time, it also provides analyses of the current recycling situation and possible recycling alternatives for Brazil. Although there are several recycling options in the United States, collection rates are still only 10% of all potential devices because customers are not aware of these possibilities. The whole system is financially based on reselling refurbished cell phones and recycled materials to developing countries which represent an effective and strong market. Several recyclers offer funds to collection partners who are either charities or who work with charities while obtaining the materials that they need in order to run their operations. A mobile phone recycling system for Brazil considering the United States experience and the Extended Producer Responsibility (EPR) principle is suggested. A deposit/refund/advance-recycling fee is proposed which might be implemented as a voluntary industrial initiative managed by PRO Brazil, a producer responsibility organization. One widespread public-private agreement will integrate all mobile phone stakeholders, and environmental education actions and promotional events will promote citizen's participation.

  8. Dimensão relacional da atividade de cuidado e condições de trabalho de auxiliares de enfermagem em uma unidade neonatal The relational dimension of the care activity and the working conditions in a neonatal unit

    Directory of Open Access Journals (Sweden)

    Letícia Pessoa Masson

    2011-01-01

    Full Text Available Este artigo analisa as condições de trabalho de auxiliares de enfermagem que atuam em Unidade Neonatal, considerando a dimensão relacional da atividade de cuidado. Tendo como principais referências epistemológicas a concepção canguilhemiana de saúde e a perspectiva ergológica, a pesquisa se pautou em abordagens clínicas do trabalhar, incluindo métodos diretos (observações, indiretos (conversas e encontros sobre o trabalho com as auxiliares e análise de documentos relativos às normas antecedentes desse trabalho. Analisou-se fundamentalmente a produção linguageira dos coletivos. Entre os resultados encontrados, destacam-se: o desenvolvimento dessa atividade de cuidado implica intensa mobilização das trabalhadoras; a possibilidade de não atender às mães que chegam para ter seus bebês parece ser mais nocivo à saúde dessas profissionais do que trabalhar com um número excessivo de pacientes. Concluiu-se que as condições precárias de trabalho são potencialmente produtoras de sofrimento patogênico, uma vez que a realização prazerosa e bem-sucedida dessa atividade é dificultada.This paper focuses on the working conditions of nursing technicians of Neonatal Units, considering the relational dimension of the care activity. Having as main epistemological references Canguilhem's concept of health of and the Ergological perspective, the research was based on the clinical approaches of work, including the following methods: direct (observations and indirect (talks and meetings about work with the technicians; analysis of documents on the previous norms concerning this work. The analysis dealt basically with the groups' language production. Some results can be highlighted: the development of this care activity implies intense mobilization of workers; the possibility of not assisting the mothers who arrive to have their babies seems to be more noxious to these technicians than to work with an overload of patients; the precarious

  9. Rokhlin Dimension for Flows

    Science.gov (United States)

    Hirshberg, Ilan; Szabó, Gábor; Winter, Wilhelm; Wu, Jianchao

    2017-07-01

    We introduce a notion of Rokhlin dimension for one parameter automorphism groups of {C^*}-algebras. This generalizes Kishimoto's Rokhlin property for flows, and is analogous to the notion of Rokhlin dimension for actions of the integers and other discrete groups introduced by the authors and Zacharias in previous papers. We show that finite nuclear dimension and absorption of a strongly self-absorbing {C^*}-algebra are preserved under forming crossed products by flows with finite Rokhlin dimension, and that these crossed products are stable. Furthermore, we show that a flow on a commutative {C^*}-algebra arising from a free topological flow has finite Rokhlin dimension, whenever the spectrum is a locally compact metrizable space with finite covering dimension. For flows that are both free and minimal, this has strong consequences for the associated crossed product {C^{*}}-algebras: Those containing a non-zero projection are classified by the Elliott invariant (for compact manifolds this consists of topological {K}-theory together with the space of invariant probability measures and a natural pairing given by the Ruelle-Sullivan map).

  10. A variational principle for the Hausdorff dimension of fractal sets

    DEFF Research Database (Denmark)

    Olsen, Lars; Cutler, Colleen D.

    1994-01-01

    Matematik, fraktal (fractal), Hausdorff dimension, Renyi dimension, pakke dimension (packing dimension)......Matematik, fraktal (fractal), Hausdorff dimension, Renyi dimension, pakke dimension (packing dimension)...

  11. Planar conjugated polymers containing 9,10-disubstituted phenanthrene units for efficient polymer solar cells.

    Science.gov (United States)

    Li, Guangwu; Kang, Chong; Li, Cuihong; Lu, Zhen; Zhang, Jicheng; Gong, Xue; Zhao, Guangyao; Dong, Huanli; Hu, Wenping; Bo, Zhishan

    2014-06-01

    Four novel conjugated polymers (P1-4) with 9,10-disubstituted phenanthrene (PhA) as the donor unit and 5,6-bis(octyloxy)benzothiadiazole as the acceptor unit are synthesized and characterized. These polymers are of medium bandgaps (2.0 eV), low-lying HOMO energy levels (below -5.3 eV), and high hole mobilities (in the range of 3.6 × 10(-3) to 0.02 cm(2) V(-1) s(-1) ). Bulk heterojunction (BHJ) polymer solar cells (PSCs) with P1-4:PC71 BM blends as the active layer and an alcohol-soluble fullerene derivative (FN-C60) as the interfacial layer between the active layer and cathode give the best power conversion efficiency (PCE) of 4.24%, indicating that 9,10-disubstituted PhA are potential donor materials for high-efficiency BHJ PSCs.

  12. Compreendendo as dimensões de cuidado em uma unidade de emergência hospitalar Comprendiendo las dimensiones de cuidado en una unidad de emergencia hospitalar Understanding care dimensions in an emergency hospital unit

    Directory of Open Access Journals (Sweden)

    Maria Aparecida Baggio

    2009-06-01

    in day-to-day nursing work. Nineteen (19 subjects were interviewed in an emergency hospital unit in Santa Catarina, Brazil. The data was submitted to content analysis and interpreted according to complex thought. The care dimensions, presented in six categories, mobilize and articulate the multiple human competencies and techniques of/by caring beings in the comprehension of the nursing care process, from the perspective of those who receive care, including rethinking nursing practice itself and the multiple conditions of the environment as a space for care.

  13. The Application of Load-cell Technique in the Study of Armour Unit Responses to Impact Loads Tests

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Liu, Z.

    1995-01-01

    The slender, complex types of armour units, such as Tetrapods and Dolosse are widely used for rubble mound breakwaters. Many of the recent failures of such structures were caused by unforeseen early breakage of the units, thus revealing an in balance between the strength (structural integrity....... slender armour units can be studied. by load-cell technique. Moreover, the paper presents DoJos design diagrams for the prediction of both breakage and hydraulic stability...

  14. The Application of Load-cell Technique in the Study of Armour Unit Responses to Impact Loads

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Liu, Zhou

    1994-01-01

    The slender, complex types of armour units, such as Tetrapods and Dolosse are widely used for rubble mound breakwaters. Many of the recent failures of such structures were caused by unforeseen early breakage of the units, thus revealing an inbalance between the strength (structural integrity...... on slender armour units can be studied by load-cell technique. Moreover, the paper presents Dolos design diagrams for the prediction of both breakage and hydraulic stability....

  15. Extra dimensions and violations of Lorentz symmetry

    CERN Document Server

    Overduin, James M

    2016-01-01

    We use experimental limits on Lorentz violation to obtain new constraints on Kaluza-Klein-type theories in which the extra dimensions may be large but do not necessarily have units of length. The associated variation in fundamental quantities such as rest mass must occur slowly, on cosmological scales.

  16. National Assessment of Oil and Gas Project - Wind River Basin Province (035) Assessment Units Quarter-Mile Cells

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production...

  17. Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell.

    Science.gov (United States)

    Kadkhodapour, J; Montazerian, H; Darabi, A Ch; Anaraki, A P; Ahmadi, S M; Zadpoor, A A; Schmauder, S

    2015-10-01

    Since the advent of additive manufacturing techniques, regular porous biomaterials have emerged as promising candidates for tissue engineering scaffolds owing to their controllable pore architecture and feasibility in producing scaffolds from a variety of biomaterials. The architecture of scaffolds could be designed to achieve similar mechanical properties as in the host bone tissue, thereby avoiding issues such as stress shielding in bone replacement procedure. In this paper, the deformation and failure mechanisms of porous titanium (Ti6Al4V) biomaterials manufactured by selective laser melting from two different types of repeating unit cells, namely cubic and diamond lattice structures, with four different porosities are studied. The mechanical behavior of the above-mentioned porous biomaterials was studied using finite element models. The computational results were compared with the experimental findings from a previous study of ours. The Johnson-Cook plasticity and damage model was implemented in the finite element models to simulate the failure of the additively manufactured scaffolds under compression. The computationally predicted stress-strain curves were compared with the experimental ones. The computational models incorporating the Johnson-Cook damage model could predict the plateau stress and maximum stress at the first peak with less than 18% error. Moreover, the computationally predicted deformation modes were in good agreement with the results of scaling law analysis. A layer-by-layer failure mechanism was found for the stretch-dominated structures, i.e. structures made from the cubic unit cell, while the failure of the bending-dominated structures, i.e. structures made from the diamond unit cells, was accompanied by the shearing bands of 45°.

  18. Identified metabolic signature for assessing red blood cell unit quality is associated with endothelial damage markers and clinical outcomes

    DEFF Research Database (Denmark)

    Bordbar, Aarash; Johansson, Pär I.; Paglia, Giuseppe;

    2016-01-01

    BACKGROUND: There has been interest in determining whether older red blood cell (RBC) units have negative clinical effects. Numerous observational studies have shown that older RBC units are an independent factor for patient mortality. However, recently published randomized clinical trials have...

  19. High quality-factor fano metasurface comprising a single resonator unit cell

    Energy Technology Data Exchange (ETDEWEB)

    Sinclair, Michael B.; Warne, Larry K.; Basilio, Lorena I.; Langston, William L.; Campione, Salvatore; Brener, Igal; Liu, Sheng

    2017-06-20

    A new monolithic resonator metasurface design achieves ultra-high Q-factors while using only one resonator per unit cell. The metasurface relies on breaking the symmetry of otherwise highly symmetric resonators to induce intra-resonator mixing of bright and dark modes (rather than inter-resonator couplings), and is scalable from the near-infrared to radio frequencies and can be easily implemented in dielectric materials. The resulting high-quality-factor Fano metasurface can be used in many sensing, spectral filtering, and modulation applications.

  20. Unit Cell Structure of Crystal Polytypes in InAs and InSb Nanowires

    DEFF Research Database (Denmark)

    Kriegner, Dominik; Panse, Christian; Mandl, Bernhard

    2011-01-01

    , wurtzite, and 4H polytypes for InAs and InSb nanowires, using X-ray diffraction and transmission electron microscopy. The results are compared to density functional theory calculations. Experiment and theory show that the occurrence of hexagonal bilayers tends to stretch the distances of atomic layers...... parallel to the c axis and to reduce the in-plane distances compared to those in zinc blende. The change of the lattice parameters scales linearly with the hexagonality of the polytype, defined as the fraction of bilayers with hexagonal character within one unit cell....

  1. Unit cell modeling in support of interim performance assessment for low level tank waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Kline, N.W., Westinghouse Hanford

    1996-08-01

    A unit cell model is used to simulate the base analysis case and related sensitivity cases for the interim performance assessment of low level tank waste disposal. Simulation case results are summarized in terms of fractional contaminant release rates to the vadose zone and to the water table at the unconfined aquifer. Results suggest that the crushed glass water conditioning layer at the top of the facility and the chemical retardation pad at the bottom of the facility can be important components of the facility. Results also suggest that the release rates to the water table are dominated by the release rate from the waste form.

  2. Auxiliary power unit based on a solid oxide fuel cell and fuelled with diesel

    Science.gov (United States)

    Lawrence, Jeremy; Boltze, Matthias

    An auxiliary power unit (APU) is presented that is fuelled with diesel, thermally self-sustaining, and based on a solid oxide fuel cell (SOFC). The APU is rated at 1 kW electrical, and can generate electrical power after a 3 h warm-up phase. System features include a "dry" catalytic partial oxidation (CPOX) diesel reformer, a 30 cell SOFC stack with an open cathode, and a porous-media afterburner. The APU does not require a supply of external water. The SOFC stack is an outcome of a development partnership with H.C. Starck GmbH and Fraunhofer IKTS, and is discussed in detail in an accompanying paper.

  3. Root cause analysis of the degradation in a unitized regenerative fuel cell

    Science.gov (United States)

    Bhosale, Amit C.; Meenakshi, S.; Ghosh, Prakash C.

    2017-03-01

    The present study emphasizes the possible modes of failure of a unitized regenerative fuel cell (URFC) when operated in fuel cell as well as in electrolysis mode at different temperatures viz. 30 °C and 60 °C. The carbon based catalyst (Pt/C) and diffusion layers are used to characterize the degradation of the URFCs. The electrolysis mode of operation is found to dominate the root cause of failure with increase in temperature. Agglomeration and loss of catalyst along with delamination of electrode from membrane are observed. Membrane degradation owing to it's structural as well as chemical damage is seen to be prominent at higher temperature. Characterization techniques such as SEM, TEM and ICP-AES confirm the study showcasing the effect.

  4. Optimizing energy management of decentralized photovoltaic. Fuel cell - direct storage - power supply units

    Energy Technology Data Exchange (ETDEWEB)

    Bocklisch, Thilo; Schufft, Wolfgang; Bocklisch, Steffen [Chemnitz Univ. of Technology (TUC) (Germany)

    2010-07-01

    This paper presents a new optimizing energy management concept for decentralized power supply units. Main goal is the coordinated utilization of dynamically controllable combined-heat-and-power-plants (e.g. fuel cell cogeneration plants) and electrochemical direct storages (e.g. future electric car batteries) for the active balancing of fluctuating renewable energy generation (e.g. building integrated photovoltaics) and fluctuation electricity consumption. The self-utilization and partial storage of renewable energy helps to stabilize the grid in a ''bottom-up'' approach. The new energy mangement concept features a three-layer control structure, which aims for the optimization of the power flows, minimizing the fuel consumption and the dynamic stress imposed onto the fuel cell. (orig.)

  5. Spherical TiO2 aggregates with different building units for dye-sensitized solar cells.

    Science.gov (United States)

    Liu, Zhaohui; Su, Xunjia; Hou, Genliang; Bi, Song; Xiao, Zhou; Jia, Haipeng

    2013-09-07

    Tailoring the architectures of spherical TiO2 aggregates is crucial to obtain superior photovoltaic properties and promote their application in dye-sensitized solar cells (DSSCs). Herein, we synthesized spherical TiO2 aggregates using different building units, including nanocrystallites, nanorods, nanosheets, and nanotubes, via a hydrothermal method, and studied the effect of the building units on the performances of DSSCs. The aggregates assembled by uniform nanosheet and nanotube building units were synthesized with the use of spherical TiO2 nanorod aggregates as titanium sources in an alkaline hydrothermal reaction. Compared with TiO2 nanoparticles, the spherical TiO2 aggregates possess higher surface area, more efficient light scattering ability, and better electron transport properties. Among the four types of spherical TiO2 aggregates; the nanorod, nanotube, and nanosheet aggregates demonstrate better electron transport properties than the nanocrystallite aggregates; the nanotube and nanosheet aggregates exhibit more efficient light scattering than the nanocrystallite and nanorod aggregates; and the nanotube aggregates show the highest surface area. Thus the DSSC based on nanotube aggregates exhibited the highest energy conversion efficiency of 7.48%, which is 16.0%, 9.7%, and 19.5% higher than those of the DSSCs based on the nanosheet, nanorod, and nanocrystallite aggregates, respectively.

  6. Selective Attention to Perceptual Dimensions and Switching between Dimensions

    Science.gov (United States)

    Meiran, Nachshon; Dimov, Eduard; Ganel, Tzvi

    2013-01-01

    In the present experiments, the question being addressed was whether switching attention between perceptual dimensions and selective attention to dimensions are processes that compete over a common resource? Attention to perceptual dimensions is usually studied by requiring participants to ignore a never-relevant dimension. Selection failure…

  7. Cultural dimensions and innovation

    Directory of Open Access Journals (Sweden)

    Anna Strychalska-Rudzewicz

    2015-11-01

    Full Text Available This paper examines the effect of culture’s dimensions on national innovation index. The results of Pearson correlation coefficient between culture dimensions and the Global Innovation Index (GII are very similar to the results obtained in the case of Summary Innovation Index (SII in European countries. The strong negative correlation was observed in the case of power distance and uncertainty avoidance whereas individualism has a positive effect on innovation index. The results suggest that low power distance and uncertainty-accepting countries may be more innovative than high power distance and uncertainty-avoiding societies.

  8. Unit cell-based computer-aided manufacturing system for tissue engineering.

    Science.gov (United States)

    Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

    2012-03-01

    Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering.

  9. Imaging the impact on cuprate superconductivity of varying the interatomic distances within individual crystal unit cells.

    Science.gov (United States)

    Slezak, J A; Lee, Jinho; Wang, M; McElroy, K; Fujita, K; Andersen, B M; Hirschfeld, P J; Eisaki, H; Uchida, S; Davis, J C

    2008-03-04

    Many theoretical models of high-temperature superconductivity focus only on the doping dependence of the CuO(2)-plane electronic structure. However, such models are manifestly insufficient to explain the strong variations in superconducting critical temperature, T(c), among cuprates that have identical hole density but are crystallographically different outside of the CuO(2) plane. A key challenge, therefore, has been to identify a predominant out-of-plane influence controlling the superconductivity, with much attention focusing on the distance d(A) between the apical oxygen and the planar copper atom. Here we report direct determination of how variations in interatomic distances within individual crystalline unit cells affect the superconducting energy-gap maximum Delta of Bi(2)Sr(2)CaCu(2)O(8+delta). In this material, quasiperiodic variations of unit cell geometry occur in the form of a bulk crystalline "supermodulation." Within each supermodulation period, we find approximately 9 +/- 1% cosinusoidal variation in local Delta that is anticorrelated with the associated d(A) variations. Furthermore, we show that phenomenological consistency would exist between these effects and the random Delta variations found near dopant atoms if the primary effect of the interstitial dopant atom is to displace the apical oxygen so as to diminish d(A) or tilt the CuO(5) pyramid. Thus, we reveal a strong, nonrandom out-of-plane effect on cuprate superconductivity at atomic scale.

  10. Intra-unit-cell nematic charge order in the titanium-oxypnictide family of superconductors

    Science.gov (United States)

    Frandsen, Benjamin A.; Bozin, Emil S.; Hu, Hefei; Zhu, Yimei; Nozaki, Yasumasa; Kageyama, Hiroshi; Uemura, Yasutomo J.; Yin, Wei-Guo; Billinge, Simon J. L.

    2014-12-01

    Understanding the role played by broken-symmetry states such as charge, spin and orbital orders in the mechanism of emergent properties, such as high-temperature superconductivity, is a major current topic in materials research. That the order may be within one unit cell, such as nematic, was only recently considered theoretically, but its observation in the iron-pnictide and doped cuprate superconductors places it at the forefront of current research. Here, we show that the recently discovered BaTi2Sb2O superconductor and its parent compound BaTi2As2O form a symmetry-breaking nematic ground state that can be naturally explained as an intra-unit-cell nematic charge order with d-wave symmetry, pointing to the ubiquity of the phenomenon. These findings, together with the key structural features in these materials being intermediate between the cuprate and iron-pnictide high-temperature superconducting materials, render the titanium oxypnictides an important new material system to understand the nature of nematic order and its relationship to superconductivity.

  11. Fuel cell collaboration in the United States. A report to the Danish Partnership for Hydrogen and Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    2011-08-15

    The purpose of this report is to provide members of the Danish Partnership for Hydrogen and Fuel Cells with information regarding collaborative opportunities in the United States. The report is designed to provide an overview of key issues and activities and to provide guidance on strategies for finding U.S. research and commercial partners and gaining access to the U.S. market. Section 1 of this report provides an overview of the key drivers of policy at the federal and state government levels regarding hydrogen and fuel cell technologies and provides a perspective of the U.S. industry and key players. It also suggests three general pathways for accessing U.S. opportunities: enhancing visibility; developing vendor relationships; and establishing a formal presence in the U.S. The next sections summarize focus areas for commercial and research activity that currently are of the greatest interest in the U.S. Section 2 describes major programs within the federal government and national laboratories, and discusses various methods for identifying R and D funding opportunities, with an overview of federal acquisition regulations. Section 3 reviews the efforts of several state governments engaging the fuel cell industry as an economic driver and presents an overview of acquisition at the state level. Section 4 discusses university research and development (R and D) and university-industry partnerships. There are 12 appendices attached to the report. These appendices provide more detailed information regarding the key federal government agencies involved in fuel cells and hydrogen, state-specific policies and activities, national laboratories and universities, and other information regarding the fuel cell and hydrogen industry in the U.S. (Author)

  12. Method card design dimensions

    DEFF Research Database (Denmark)

    Wölfel, Christiane; Merritt, T.

    2013-01-01

    . The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...

  13. Dimensions of trust

    DEFF Research Database (Denmark)

    Frederiksen, Morten

    2012-01-01

    in scope and mode influenced by the intersecting dimensions of relations, objects and situations. Furthermore, trust exists between an outer threshold of expected deceit and an inner threshold of confident reliance. The findings from the qualitative study contribute new knowledge on the diversity of trust...

  14. STREAMLINED APPROACH FOR ENVIRONMENTAL RESTORATION PLAN FOR CORRECTIVE ACTION UNIT 116: AREA 25 TEST CELL C FACILITYNEVADA TEST SITE, NEVADA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This Streamlined Approach for Environmental Restoration Plan identifies the activities required for the closure of Corrective Action Unit 116, Area 25 Test Cell C Facility. The Test Cell C Facility is located in Area 25 of the Nevada Test Site approximately 25 miles northwest of Mercury, Nevada.

  15. National narcissism: Internal dimensions and international correlates.

    Science.gov (United States)

    Cai, Huajian; Gries, Peter

    2013-08-01

    In studies conducted in the United States and China, we explored the impact of national narcissism, grandiosity, and entitlement, demonstrating that: (a) national narcissism was distinct from both individual narcissism and collective self-esteem (patriotism); (b) national entitlement and national grandiosity constituted two distinct dimensions of national narcissism; and (c) national narcissism, national grandiosity, and national entitlement, but not individual narcissism, were uniquely predictive of political attitudes, foreign policy preferences, and purchase intentions. Together, these findings provided convergent evidence for the utility of national narcissism and its two internal dimensions, national entitlement and national grandiosity.

  16. Impact of the irregular microgeometry of polyurethane foam on the macroscopic acoustic behavior predicted by a unit-cell model.

    Science.gov (United States)

    Doutres, O; Ouisse, M; Atalla, N; Ichchou, M

    2014-10-01

    This paper deals with the prediction of the macroscopic sound absorption behavior of highly porous polyurethane foams using two unit-cell microstructure-based models recently developed by Doutres, Atalla, and Dong [J. Appl. Phys. 110, 064901 (2011); J. Appl. Phys. 113, 054901 (2013)]. In these models, the porous material is idealized as a packing of a tetrakaidecahedra unit-cell representative of the disordered network that constitutes the porous frame. The non-acoustic parameters involved in the classical Johnson-Champoux-Allard model (i.e., porosity, airflow resistivity, tortuosity, etc.) are derived from characteristic properties of the unit-cell and semi-empirical relationships. A global sensitivity analysis is performed on these two models in order to investigate how the variability associated with the measured unit-cell characteristics affects the models outputs. This allows identification of the possible limitations of a unit-cell micro-macro approach due to microstructure irregularity. The sensitivity analysis mainly shows that for moderately and highly reticulated polyurethane foams, the strut length parameter is the key parameter since it greatly impacts three important non-acoustic parameters and causes large uncertainty on the sound absorption coefficient even if its measurement variability is moderate. For foams with a slight inhomogeneity and anisotropy, a micro-macro model associated to cell size measurements should be preferred.

  17. Techno-economic analysis of fuel cell auxiliary power units as alternative to idling

    Science.gov (United States)

    Jain, Semant; Chen, Hsieh-Yeh; Schwank, Johannes

    This paper presents a techno-economic analysis of fuel-cell-based auxiliary power units (APUs), with emphasis on applications in the trucking industry and the military. The APU system is intended to reduce the need for discretionary idling of diesel engines or gas turbines. The analysis considers the options for on-board fuel processing of diesel and compares the two leading fuel cell contenders for automotive APU applications: proton exchange membrane fuel cell and solid oxide fuel cell. As options for on-board diesel reforming, partial oxidation and auto-thermal reforming are considered. Finally, using estimated and projected efficiency data, fuel consumption patterns, capital investment, and operating costs of fuel-cell APUs, an economic evaluation of diesel-based APUs is presented, with emphasis on break-even periods as a function of fuel cost, investment cost, idling time, and idling efficiency. The analysis shows that within the range of parameters studied, there are many conditions where deployment of an SOFC-based APU is economically viable. Our analysis indicates that at an APU system cost of 100 kW -1, the economic break-even period is within 1 year for almost the entire range of conditions. At 500 kW -1 investment cost, a 2-year break-even period is possible except for the lowest end of the fuel consumption range considered. However, if the APU investment cost is 3000 kW -1, break-even would only be possible at the highest fuel consumption scenarios. For Abram tanks, even at typical land delivered fuel costs, a 2-year break-even period is possible for APU investment costs as high as 1100 kW -1.

  18. Algorithm and program for precise determination of unit-cell parameters of single crystal taking into account the sample eccentricity

    Science.gov (United States)

    Dudka, A. P.; Smirnova, E. S.; Verin, I. A.; Bolotina, N. B.

    2017-07-01

    A technique has been developed to refine the unit-cell parameters of single crystals with minimization of the influence of instrumental errors on the result. The corresponding computational procedure HuberUB is added to the software package of Huber-5042 diffractometer with a point detector and closedcycle helium cryostat Displex DE-202. The parameters of unit cell, its orientation, the goniometer zero angles, the sample eccentricity, the distances in the goniometer, and the radiation wavelength were refined by the nonlinear least-squares method, which allows imposition of constraints on the unit-cell parameters, depending on the crystal symmetry. The technique is approved on a LuB12 single crystal. The unit-cell parameters are determined in a temperature range of 20-295 K, with an absolute error not larger than 0.0004 Å (the relative error is of 5 × 10-5). The estimates of the unit-cell parameters obtained by the proposed method are evidenced to be unbiased. Some specific features of the behavior of parameters in the ranges of 120-140 and 20-50 K are revealed, which correlate with the anomalies of the physical properties of the crystal.

  19. Exfoliation of natural van der Waals heterostructures to a single unit cell thickness

    Science.gov (United States)

    Velický, Matěj; Toth, Peter S.; Rakowski, Alexander M.; Rooney, Aidan P.; Kozikov, Aleksey; Woods, Colin R.; Mishchenko, Artem; Fumagalli, Laura; Yin, Jun; Zólyomi, Viktor; Georgiou, Thanasis; Haigh, Sarah J.; Novoselov, Kostya S.; Dryfe, Robert A. W.

    2017-02-01

    Weak interlayer interactions in van der Waals crystals facilitate their mechanical exfoliation to monolayer and few-layer two-dimensional materials, which often exhibit striking physical phenomena absent in their bulk form. Here we utilize mechanical exfoliation to produce a two-dimensional form of a mineral franckeite and show that the phase segregation of chemical species into discrete layers at the sub-nanometre scale facilitates franckeite's layered structure and basal cleavage down to a single unit cell thickness. This behaviour is likely to be common in a wider family of complex minerals and could be exploited for a single-step synthesis of van der Waals heterostructures, as an alternative to artificial stacking of individual two-dimensional crystals. We demonstrate p-type electrical conductivity and remarkable electrochemical properties of the exfoliated crystals, showing promise for a range of applications, and use the density functional theory calculations of franckeite's electronic band structure to rationalize the experimental results.

  20. Prognosis of Allogeneic Haematopoietic Stem Cell Recipients Admitted to the Intensive Care Unit

    DEFF Research Database (Denmark)

    Lindgaard, Sidsel Christy; Nielsen, Jonas; Lindmark, Anders

    2016-01-01

    BACKGROUND: Allogeneic haematopoietic stem cell transplantation (HSCT) is a procedure with inherent complications and intensive care may be necessary. We evaluated the short- and long-term outcomes of the HSCT recipients requiring admission to the intensive care unit (ICU). METHODS: We...... ventilation had a statistically significant effect on in-ICU (p = 0.02), 6-month (p = 0.049) and 1-year (p = 0.014) mortality. Renal replacement therapy also had a statistically significant effect on in-hospital (p = 0.038) and 6-month (p = 0.026) mortality. Short ICU admissions, i.e. ... to the ICU was confirmed in our study. Mechanical ventilation, renal replacement therapy and an ICU admission of ≥10 days were each risk factors for mortality in the first year after ICU admission....

  1. An explicit algorithm for fully flexible unit cell simulation with recursive thermostat chains.

    Science.gov (United States)

    Jung, Kwangsub; Cho, Maenghyo

    2008-10-28

    Through the combination of the recursive multiple thermostat (RMT) Nose-Poincare and Parrinello-Rahman methods, the recursive multiple thermostat chained fully flexible unit cell (RMT-NsigmaT) molecular dynamics method is proposed for isothermal-isobaric simulation. The RMT method is known to have the advantage of achieving the ergodicity that is required for canonical sampling of the harmonic oscillator. Thus, an explicit time integration algorithm is developed for RMT-NsigmaT. We examine the ergodicity for various parameters of RMT-NsigmaT using bulk and thin film structures with different numbers of copper atoms and thicknesses in various environments. Through the numerical simulations, we conclude that the RMT-NsigmaT method is advantageous in the cases of lower temperatures.

  2. A diesel fuel processor for fuel-cell-based auxiliary power unit applications

    Science.gov (United States)

    Samsun, Remzi Can; Krekel, Daniel; Pasel, Joachim; Prawitz, Matthias; Peters, Ralf; Stolten, Detlef

    2017-07-01

    Producing a hydrogen-rich gas from diesel fuel enables the efficient generation of electricity in a fuel-cell-based auxiliary power unit. In recent years, significant progress has been achieved in diesel reforming. One issue encountered is the stable operation of water-gas shift reactors with real reformates. A new fuel processor is developed using a commercial shift catalyst. The system is operated using optimized start-up and shut-down strategies. Experiments with diesel and kerosene fuels show slight performance drops in the shift reactor during continuous operation for 100 h. CO concentrations much lower than the target value are achieved during system operation in auxiliary power unit mode at partial loads of up to 60%. The regeneration leads to full recovery of the shift activity. Finally, a new operation strategy is developed whereby the gas hourly space velocity of the shift stages is re-designed. This strategy is validated using different diesel and kerosene fuels, showing a maximum CO concentration of 1.5% at the fuel processor outlet under extreme conditions, which can be tolerated by a high-temperature PEFC. The proposed operation strategy solves the issue of strong performance drop in the shift reactor and makes this technology available for reducing emissions in the transportation sector.

  3. Cosmology With Extra Dimensions

    CERN Document Server

    Martín, J

    2005-01-01

    We review several properties of models that include extra dimensions, focusing on aspects related to cosmology and particle physics phenomenology. The properties of effective four dimensional inflationary geometry are studied in two distinct frameworks: (i) in Kaluza- Klein (KK) compactifications and (ii) in braneworld scenarios. From numerical simulations we find that inflationary braneworlds are unstable if the scale of inflation is too large in comparison with the stabilization scale of the interbrane distance. The analysis of perturbations confirms the existence of a tachyon associated with the volume modulus of the extra dimensions both in braneworlds and KK compactifications. With the numerical program BRANECODE non- perturbative properties of braneworlds are studied. We fully understand the non-perturbative consequences of this instability. Generic attractors are (i) an increase of the interbrane distance and the formation of a naked singularity, (ii) the brane colli...

  4. Cultural dimensions of learning

    Science.gov (United States)

    Eyford, Glen A.

    1990-06-01

    How, what, when and where we learn is frequently discussed, as are content versus process, or right brain versus left brain learning. What is usually missing is the cultural dimension. This is not an easy concept to define, but various aspects can be identified. The World Decade for Cultural Development emphasizes the need for a counterbalance to a quantitative, economic approach. In the last century poets also warned against brutalizing materialism, and Sorokin and others have described culture more recently in terms of cohesive basic values expressed through aesthetics and institutions. Bloom's taxonomy incorporates the category of affective learning, which internalizes values. If cultural learning goes beyond knowledge acquisition, perhaps the surest way of understanding the cultural dimension of learning is to examine the aesthetic experience. This can use myths, metaphors and symbols, and to teach and learn by using these can help to unlock the human potential for vision and creativity.

  5. Introduction to Extra Dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Rizzo, Thomas G.; /SLAC

    2010-04-29

    Extra dimensions provide a very useful tool in addressing a number of the fundamental problems faced by the Standard Model. The following provides a very basic introduction to this very broad subject area as given at the VIII School of the Gravitational and Mathematical Physics Division of the Mexican Physical Society in December 2009. Some prospects for extra dimensional searches at the 7 TeV LHC with {approx}1 fb{sup -1} of integrated luminosity are provided.

  6. The Regional Dimension

    DEFF Research Database (Denmark)

    Eskjær, Mikkel Fugl

    2013-01-01

    is largely dependent on regional media systems, yet the role this regional dimension plays has been largely overlooked. This article presents a comparative study of climate-change coverage in three geo-cultural regions, The Middle East, Scandinavia, and North America, and explores the link between global...... climate-change communication and regional media systems. It finds that regional variations in climate-change communication carry important communicative implications concerning perceptions of climate change's relevance and urgency...

  7. Fuel cell system including a unit for electrical isolation of a fuel cell stack from a manifold assembly and method therefor

    Science.gov (United States)

    Kelley; Dana A. , Farooque; Mohammad , Davis; Keith

    2007-10-02

    A fuel cell system with improved electrical isolation having a fuel cell stack with a positive potential end and a negative potential, a manifold for use in coupling gases to and from a face of the fuel cell stack, an electrical isolating assembly for electrically isolating the manifold from the stack, and a unit for adjusting an electrical potential of the manifold such as to impede the flow of electrolyte from the stack across the isolating assembly.

  8. Specific Yielding of Selective Laser-Melted Ti6Al4V Open-Porous Scaffolds as a Function of Unit Cell Design and Dimensions

    Directory of Open Access Journals (Sweden)

    Volker Weißmann

    2016-07-01

    Full Text Available Bone loss in the near-vicinity of implants can be a consequence of stress shielding due to stiffness mismatch. This can be avoided by reducing implant stiffness, i.e., by implementing an open-porous structure. Three open-porous designs were therefore investigated (cubic, pyramidal and a twisted design. Scaffolds were fabricated by a selective laser-melting (SLM process and material properties were determined by conducting uniaxial compression testing. The calculated elastic modulus values for the scaffolds varied between 3.4 and 26.3 GP and the scaffold porosities between 43% and 80%. A proportional linear correlation was found between the elastic modulus and the geometrical parameters, between the elastic modulus and the compressive strengths, as well as between the strut width-to-diameter ratio (a/d and elastic modulus. Furthermore, we found a power-law relationship between porosity and the modulus of elasticity that characterizes specific yielding. With respect to scaffold porosity, the description of specific yielding behaviour offers a simple way to characterize the mechanical properties of open-porous structures and helps generate scaffolds with properties specific to their intended application. A direct comparison with human bone parameters is also possible. We generated scaffolds with mechanical properties sufficiently close to that of human cortical bone.

  9. Fractal dimension and architecture of trabecular bone.

    Science.gov (United States)

    Fazzalari, N L; Parkinson, I H

    1996-01-01

    The fractal dimension of trabecular bone was determined for biopsies from the proximal femur of 25 subjects undergoing hip arthroplasty. The average age was 67.7 years. A binary profile of the trabecular bone in the biopsy was obtained from a digitized image. A program written for the Quantimet 520 performed the fractal analysis. The fractal dimension was calculated for each specimen, using boxes whose sides ranged from 65 to 1000 microns in length. The mean fractal dimension for the 25 subjects was 1.195 +/- 0.064 and shows that in Euclidean terms the surface extent of trabecular bone is indeterminate. The Quantimet 520 was also used to perform bone histomorphometric measurements. These were bone volume/total volume (BV/TV) (per cent) = 11.05 +/- 4.38, bone surface/total volume (BS/TV) (mm2/mm3) = 1.90 +/- 0.51, trabecular thickness (Tb.Th) (mm) = 0.12 +/- 0.03, trabecular spacing (Tb.Sp) (mm) = 1.03 +/- 0.36, and trabecular number (Tb.N) (number/mm) = 0.95 +/- 0.25. Pearsons' correlation coefficients showed a statistically significant relationship between the fractal dimension and all the histomorphometric parameters, with BV/TV (r = 0.85, P fractal dimension shows that trabecular bone exhibits fractal properties over a defined box size, which is within the dimensions of a structural unit for trabecular bone. Therefore, the fractal dimension of trabecular bone provides a measure which does not rely on Euclidean descriptors in order to describe a complex geometry.

  10. Bidirectional relationship of mast cells-neurovascular unit communication in neuroinflammation and its involvement in POCD.

    Science.gov (United States)

    Li, Nana; Zhang, Xiang; Dong, Hongquan; Hu, Youli; Qian, Yanning

    2017-03-30

    Postoperative cognitive dysfunction (POCD) has been hypothesized to be mediated by surgery-induced neuroinflammation, which is also a key element in the pathobiology of neurodegenerative diseases, stroke, and neuropsychiatric disorders. There is extensive communication between the immune system and the central nervous system (CNS). Inflammation resulting from activation of the innate immune system cells in the periphery can impact central nervous system behaviors, such as cognitive performance. Mast cells (MCs), as the"first responders" in the CNS, can initiate, amplify, and prolong other immune and nervous responses upon activation. In addition, MCs and their secreted mediators modulate inflammatory processes in multiple CNS pathologies and can thereby either contribute to neurological damage or confer neuroprotection. Neuroinflammation has been considered to be linked to neurovascular dysfunction in several neurological disorders. This review will provide a brief overview of the bidirectional relationship of MCs-neurovascular unit communication in neuroinflammation and its involvement in POCD, providing a new and unique therapeutic target for the adjuvant treatment of POCD.

  11. Two-Dimensional Simulation of Mass Transfer in Unitized Regenerative Fuel Cells under Operation Mode Switching

    Directory of Open Access Journals (Sweden)

    Lulu Wang

    2016-01-01

    Full Text Available A two-dimensional, single-phase, isothermal, multicomponent, transient model is built to investigate the transport phenomena in unitized regenerative fuel cells (URFCs under the condition of switching from the fuel cell (FC mode to the water electrolysis (WE mode. The model is coupled with an electrochemical reaction. The proton exchange membrane (PEM is selected as the solid electrolyte of the URFC. The work is motivated by the need to elucidate the complex mass transfer and electrochemical process under operation mode switching in order to improve the performance of PEM URFC. A set of governing equations, including conservation of mass, momentum, species, and charge, are considered. These equations are solved by the finite element method. The simulation results indicate the distributions of hydrogen, oxygen, water mass fraction, and electrolyte potential response to the transient phenomena via saltation under operation mode switching. The hydrogen mass fraction gradients are smaller than the oxygen mass fraction gradients. The average mass fractions of the reactants (oxygen and hydrogen and product (water exhibit evident differences between each layer in the steady state of the FC mode. By contrast, the average mass fractions of the reactant (water and products (oxygen and hydrogen exhibit only slight differences between each layer in the steady state of the WE mode. Under either the FC mode or the WE mode, the duration of the transient state is only approximately 0.2 s.

  12. Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties

    Directory of Open Access Journals (Sweden)

    Seyed Mohammad Ahmadi

    2015-04-01

    Full Text Available It is known that the mechanical properties of bone-mimicking porous biomaterials are a function of the morphological properties of the porous structure, including the configuration and size of the repeating unit cell from which they are made. However, the literature on this topic is limited, primarily because of the challenge in fabricating porous biomaterials with arbitrarily complex morphological designs. In the present work, we studied the relationship between relative density (RD of porous Ti6Al4V EFI alloy and five compressive properties of the material, namely elastic gradient or modulus (Es20–70, first maximum stress, plateau stress, yield stress, and energy absorption. Porous structures with different RD and six different unit cell configurations (cubic (C, diamond (D, truncated cube (TC, truncated cuboctahedron (TCO, rhombic dodecahedron (RD, and rhombicuboctahedron (RCO were fabricated using selective laser melting. Each of the compressive properties increased with increase in RD, the relationship being of a power law type. Clear trends were seen in the influence of unit cell configuration and porosity on each of the compressive properties. For example, in terms of Es20–70, the structures may be divided into two groups: those that are stiff (comprising those made using C, TC, TCO, and RCO unit cell and those that are compliant (comprising those made using D and RD unit cell.

  13. Inhibition of Autophagy Enhances Curcumin United light irradiation-induced Oxidative Stress and Tumor Growth Suppression in Human Melanoma Cells

    Science.gov (United States)

    Niu, Tianhui; Tian, Yan; Mei, Zhusong; Guo, Guangjin

    2016-01-01

    Malignant melanoma is the most aggressive form of skin carcinoma, which possesses fast propagating and highly invasive characteristics. Curcumin is a natural phenol compound that has various biological activities, such as anti-proliferative and apoptosis-accelerating impacts on tumor cells. Unfortunately, the therapeutical activities of Cur are severely hindered due to its extremely low bioavailability. In this study, a cooperative therapy of low concentration Cur combined with red united blue light irradiation was performed to inspect the synergistic effects on the apoptosis, proliferation and autophagy in human melanoma A375 cell. The results showed that red united blue light irradiation efficaciously synergized with Cur to trigger oxidative stress-mediated cell death, induce apoptosis and inhibit cell proliferation. Meanwhile, Western blotting revealed that combined disposure induced the formation of autophagosomes. Conversely, inhibition of the autophagy enhanced apoptosis, obstructed cell cycle arrest and induced reversible proliferation arrest to senescence. These findings suggest that Cur combined with red united blue light irradiation could generate photochemo-preventive effects via enhancing apoptosis and triggering autophagy, and pharmacological inhibition of autophagy convert reversible arrested cells to senescence, therefore reducing the possibility that damaged cells might escape programmed death. PMID:27502897

  14. Public Value Dimensions

    DEFF Research Database (Denmark)

    Andersen, lotte bøgh; Beck Jørgensen, Torben; Kjeldsen, Anne-Mette

    2012-01-01

    Further integration of the public value literature with other strands of literature within Public Administration necessitates a more specific classification of public values. This paper applies a typology linked to organizational design principles, because this is useful for empirical public...... administration studies. Based on an existing typology of modes of governance, we develop a classification and test it empirically, using survey data from a study of the values of 501 public managers. We distinguish between seven value dimensions (the public at large, rule abidance, societal interests, budget...... the integration between the public value literature and other parts of the Public Administration discipline....

  15. Growth Factor Independence-1 (Gfi1) Is Required for Pancreatic Acinar Unit Formation and Centroacinar Cell Differentiation

    DEFF Research Database (Denmark)

    Qu, Xiaoling; Nyeng, Pia; Xiao, Fan

    2015-01-01

    BACKGROUND & AIMS: The genetic specification of the compartmentalized pancreatic acinar/centroacinar unit is poorly understood. Growth factor independence-1 (Gfi1) is a zinc finger transcriptional repressor that regulates hematopoietic stem cell maintenance, pre-T-cell differentiation, formation...... of pancreatic acinar cells as well as the centroacinar cells (CACs) in Gfi1(-/-) mice when compared with wild-type littermates. Pancreatic endocrine differentiation, islet architecture, and function were unaffected. Organ domain patterning and the formation of ductal cells occurred normally during the murine...... of granulocytes, inner ear hair cells, and the development of secretory cell types in the intestine. As GFI1/Gfi1 is expressed in human and rodent pancreas, we characterized the potential function of Gfi1 in mouse pancreatic development. METHODS: Gfi1 knockout mice were analyzed at histological and molecular...

  16. Adjoint Functors and Representation Dimensions

    Institute of Scientific and Technical Information of China (English)

    Chang Chang XI

    2006-01-01

    We study the global dimensions of the coherent functors over two categories that are linked by a pair of adjoint functors. This idea is then exploited to compare the representation dimensions of two algebras. In particular, we show that if an Artin algebra is switched from the other, then they have the same representation dimension.

  17. High-Tc superconductivity in ultrathin Bi2Sr2CaCu2O(8+x) down to half-unit-cell thickness by protection with graphene.

    Science.gov (United States)

    Jiang, Da; Hu, Tao; You, Lixing; Li, Qiao; Li, Ang; Wang, Haomin; Mu, Gang; Chen, Zhiying; Zhang, Haoran; Yu, Guanghui; Zhu, Jie; Sun, Qiujuan; Lin, Chengtian; Xiao, Hong; Xie, Xiaoming; Jiang, Mianheng

    2014-12-08

    High-Tc superconductors confined to two dimension exhibit novel physical phenomena, such as superconductor-insulator transition. In the Bi2Sr2CaCu2O(8+x) (Bi2212) model system, despite extensive studies, the intrinsic superconducting properties at the thinness limit have been difficult to determine. Here, we report a method to fabricate high quality single-crystal Bi2212 films down to half-unit-cell thickness in the form of graphene/Bi2212 van der Waals heterostructure, in which sharp superconducting transitions are observed. The heterostructure also exhibits a nonlinear current-voltage characteristic due to the Dirac nature of the graphene band structure. More interestingly, although the critical temperature remains essentially the same with reduced thickness of Bi2212, the slope of the normal state T-linear resistivity varies by a factor of 4-5, and the sheet resistance increases by three orders of magnitude, indicating a surprising decoupling of the normal state resistance and superconductivity. The developed technique is versatile, applicable to investigate other two-dimensional (2D) superconducting materials.

  18. Multi-core: Adding a New Dimension to Computing

    CERN Document Server

    Amin, Md Tanvir Al

    2010-01-01

    Invention of Transistors in 1948 started a new era in technology, called Solid State Electronics. Since then, sustaining development and advancement in electronics and fabrication techniques has caused the devices to shrink in size and become smaller, paving the quest for increasing density and clock speed. That quest has suddenly come to a halt due to fundamental bounds applied by physical laws. But, demand for more and more computational power is still prevalent in the computing world. As a result, the microprocessor industry has started exploring the technology along a different dimension. Speed of a single work unit (CPU) is no longer the concern, rather increasing the number of independent processor cores packed in a single package has become the new concern. Such processors are commonly known as multi-core processors. Scaling the performance by using multiple cores has gained so much attention from the academia and the industry, that not only desktops, but also laptops, PDAs, cell phones and even embedd...

  19. Effects of Dexamethasone on Satellite Cells and Tissue Engineered Skeletal Muscle Units.

    Science.gov (United States)

    Syverud, Brian C; VanDusen, Keith W; Larkin, Lisa M

    2016-03-01

    Tissue engineered skeletal muscle has potential for application as a graft source for repairing soft tissue injuries, a model for testing pharmaceuticals, and a biomechanical actuator system for soft robots. However, engineered muscle to date has not produced forces comparable to native muscle, limiting its potential for repair and for use as an in vitro model for pharmaceutical testing. In this study, we examined the trophic effects of dexamethasone (DEX), a glucocorticoid that stimulates myoblast differentiation and fusion into myotubes, on our tissue engineered three-dimensional skeletal muscle units (SMUs). Using our established SMU fabrication protocol, muscle isolates were cultured with three experimental DEX concentrations (5, 10, and 25 nM) and compared to untreated controls. Following seeding onto a laminin-coated Sylgard substrate, the administration of DEX was initiated on day 0 or day 6 in growth medium or on day 9 after the switch to differentiation medium and was sustained until the completion of SMU fabrication. During this process, total cell proliferation was measured with a BrdU assay, and myogenesis and structural advancement of muscle cells were observed through immunostaining for MyoD, myogenin, desmin, and α-actinin. After SMU formation, isometric tetanic force production was measured to quantify function. The histological and functional assessment of the SMU showed that the administration of 10 nM DEX beginning on either day 0 or day 6 yielded optimal SMUs. These optimized SMUs exhibited formation of advanced sarcomeric structure and significant increases in myotube diameter and myotube fusion index, compared with untreated controls. Additionally, the optimized SMUs matured functionally, as indicated by a fivefold rise in force production. In conclusion, we have demonstrated that the addition of DEX to our process of engineering skeletal muscle tissue improves myogenesis, advances muscle structure, and increases force production in the

  20. Progress in human embryonic stem cell research in the United States between 2001 and 2010.

    Directory of Open Access Journals (Sweden)

    Keyvan Vakili

    Full Text Available On August 9th, 2001, the federal government of the United States announced a policy restricting federal funds available for research on human embryonic stem cell (hESCs out of concern for the "vast ethical mine fields" associated with the creation of embryos for research purposes. Until the policy was repealed on March 9th, 2009, no U.S. federal funds were available for research on hESCs extracted after August 9, 2001, and only limited federal funds were available for research on a subset of hESC lines that had previously been extracted. This paper analyzes how the 2001 U.S. federal funding restrictions influenced the quantity and geography of peer-reviewed journal publications on hESC. The primary finding is that the 2001 policy did not have a significant aggregate effect on hESC research in the U.S. After a brief lag in early 2000s, U.S. hESC research maintained pace with other areas of stem cell and genetic research. The policy had several other consequences. First, it was tied to increased hESC research funding within the U.S. at the state level, leading to concentration of related activities in a relatively small number of states. Second, it stimulated increased collaborative research between US-based scientists and those in countries with flexible policies toward hESC research (including Canada, the U.K., Israel, China, Spain, and South Korea. Third, it encouraged independent hESC research in countries without restrictions.

  1. Highly Efficient and Exceptionally Durable CO2 Photoreduction to Methanol over Freestanding Defective Single-Unit-Cell Bismuth Vanadate Layers.

    Science.gov (United States)

    Gao, Shan; Gu, Bingchuan; Jiao, Xingchen; Sun, Yongfu; Zu, Xiaolong; Yang, Fan; Zhu, Wenguang; Wang, Chengming; Feng, Zimou; Ye, Bangjiao; Xie, Yi

    2017-03-08

    Unearthing an ideal model for disclosing the role of defect sites in solar CO2 reduction remains a great challenge. Here, freestanding gram-scale single-unit-cell o-BiVO4 layers are successfully synthesized for the first time. Positron annihilation spectrometry and X-ray fluorescence unveil their distinct vanadium vacancy concentrations. Density functional calculations reveal that the introduction of vanadium vacancies brings a new defect level and higher hole concentration near Fermi level, resulting in increased photoabsorption and superior electronic conductivity. The higher surface photovoltage intensity of single-unit-cell o-BiVO4 layers with rich vanadium vacancies ensures their higher carriers separation efficiency, further confirmed by the increased carriers lifetime from 74.5 to 143.6 ns revealed by time-resolved fluorescence emission decay spectra. As a result, single-unit-cell o-BiVO4 layers with rich vanadium vacancies exhibit a high methanol formation rate up to 398.3 μmol g(-1) h(-1) and an apparent quantum efficiency of 5.96% at 350 nm, much larger than that of single-unit-cell o-BiVO4 layers with poor vanadium vacancies, and also the former's catalytic activity proceeds without deactivation even after 96 h. This highly efficient and spectrally stable CO2 photoconversion performances hold great promise for practical implementation of solar fuel production.

  2. Urban Screen and Spatial Dimension

    Directory of Open Access Journals (Sweden)

    Litta Primasari

    2013-11-01

    Full Text Available This paper is discussing about the urban screen phenomena and its influence to spatial dimension in urban space. The visual characteristics which are forming a spatial dimension will be an emphasis to be presented. Urban screen as a visual intervention has an impact to spatial configuration in urban space. The space dimension was not dominated with materiality limitation, but also images. We have to consider that people senses can measure a spatial dimension, knowing as a perception. That is a human visual and mind relation. The spatial dimension has no longer tangible boundary, but also has intangible ones. Spatial dimension in urban screens phenomena is not merely mathematics, nor spatial dimension in physics which are based on a three-dimensional Cartesian coordinate system. Movement can be expressed in other terms, by how far we can move depends on our eyes to catch that space limitation, and how fast we can move is depends on our mind to perceive some visual phenomenon, that is a spatial dimension. So, the dimension will depend on a visual quality that we perceived. The movement of the body and people’s thought will be an important term to generate the space dimension in urban screen phenomenon. The activity of body’s movement and thought will influence the depth of space dimension.

  3. Correlation dimension of financial market

    Science.gov (United States)

    Nie, Chun-Xiao

    2017-05-01

    In this paper, correlation dimension is applied to financial data analysis. We calculate the correlation dimensions of some real market data and find that the dimensions are significantly smaller than those of the simulation data based on geometric Brownian motion. Based on the analysis of the Chinese and US stock market data, the main results are as follows. First, by calculating three data sets for the Chinese and US market, we find that large market volatility leads to a significant decrease in the dimensions. Second, based on 5-min stock price data, we find that the Chinese market dimension is significantly larger than the US market; this shows a significant difference between the two markets for high frequency data. Third, we randomly extract stocks from a stock set and calculate the correlation dimensions, and find that the average value of these dimensions is close to the dimension of the original set. In addition, we analyse the intuitional meaning of the relevant dimensions used in this paper, which are directly related to the average degree of the financial threshold network. The dimension measures the speed of the average degree that varies with the threshold value. A smaller dimension means that the rate of change is slower.

  4. Investigation of potential fluctuating intra-unit cell magnetic order in cuprates by μ SR

    Science.gov (United States)

    Pal, A.; Akintola, K.; Potma, M.; Ishikado, M.; Eisaki, H.; Hardy, W. N.; Bonn, D. A.; Liang, R.; Sonier, J. E.

    2016-10-01

    We report low temperature muon spin relaxation (μ SR ) measurements of the high-transition-temperature (Tc) cuprate superconductors Bi2 +xSr2 -xCaCu2O8 +δ and YBa2Cu3O6.57 , aimed at detecting the mysterious intra-unit cell (IUC) magnetic order that has been observed by spin-polarized neutron scattering in the pseudogap phase of four different cuprate families. A lack of confirmation by local magnetic probe methods has raised the possibility that the magnetic order fluctuates slowly enough to appear static on the time scale of neutron scattering, but too fast to affect μ SR or nuclear magnetic resonance signals. The IUC magnetic order has been linked to a theoretical model for the cuprates, which predicts a long-range ordered phase of electron-current loop order that terminates at a quantum crictical point (QCP). Our study suggests that lowering the temperature to T ˜25 mK and moving far below the purported QCP does not cause enough of a slowing down of fluctuations for the IUC magnetic order to become detectable on the time scale of μ SR . Our measurements place narrow limits on the fluctuation rate of this unidentified magnetic order.

  5. Results and analysis of saltstone cores taken from saltstone disposal unit cell 2A

    Energy Technology Data Exchange (ETDEWEB)

    Reigel, M. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hill, K. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-03-01

    As part of an ongoing Performance Assessment (PA) Maintenance Plan, Savannah River Remediation (SRR) has developed a sampling and analyses strategy to facilitate the comparison of field-emplaced samples (i.e., saltstone placed and cured in a Saltstone Disposal Unit (SDU)) with samples prepared and cured in the laboratory. The primary objectives of the Sampling and Analyses Plan (SAP) are; (1) to demonstrate a correlation between the measured properties of laboratory-prepared, simulant samples (termed Sample Set 3), and the field-emplaced saltstone samples (termed Sample Set 9), and (2) to validate property values assumed for the Saltstone Disposal Facility (SDF) PA modeling. The analysis and property data for Sample Set 9 (i.e. six core samples extracted from SDU Cell 2A (SDU2A)) are documented in this report, and where applicable, the results are compared to the results for Sample Set 3. Relevant properties to demonstrate the aforementioned objectives include bulk density, porosity, saturated hydraulic conductivity (SHC), and radionuclide leaching behavior.

  6. The modeling of a standalone solid-oxide fuel cell auxiliary power unit

    Science.gov (United States)

    Lu, N.; Li, Q.; Sun, X.; Khaleel, M. A.

    In this research, a Simulink model of a standalone vehicular solid-oxide fuel cell (SOFC) auxiliary power unit (APU) is developed. The SOFC APU model consists of three major components: a controller model; a power electronics system model; and an SOFC plant model, including an SOFC stack module, two heat exchanger modules, and a combustor module. This paper discusses the development of the nonlinear dynamic models for the SOFC stacks, the heat exchangers and the combustors. When coupling with a controller model and a power electronic circuit model, the developed SOFC plant model is able to model the thermal dynamics and the electrochemical dynamics inside the SOFC APU components, as well as the transient responses to the electric loading changes. It has been shown that having such a model for the SOFC APU will help design engineers to adjust design parameters to optimize the performance. The modeling results of the SOFC APU heat-up stage and the output voltage response to a sudden load change are presented in this paper. The fuel flow regulation based on fuel utilization is also briefly discussed.

  7. Fungal spore concentrations in two haematopoietic stem cell transplantation (HSCT) units containing distinct air control systems.

    Science.gov (United States)

    Brun, C P; Miron, D; Silla, L M R; Pasqualotto, A C

    2013-04-01

    Invasive fungal diseases have emerged as important causes of morbidity and mortality in haematological patients. In this study air samples were collected in two haematopoietic stem cell transplantation (HSCT) units, in which distinct air-control systems were in place. In hospital 1 no high-efficiency particulate air (HEPA) filter was available whereas in hospital 2 HSCT rooms were equipped with HEPA filters, with positive air pressure in relation to the corridor. A total of 117 samples from rooms, toilets and corridors were obtained during December 2009 to January 2011, using a six-stage Andersen sampler. In both hospitals, the concentration of potentially pathogenic fungi in the air was reduced in patients' rooms compared to corridors (P < 0·0001). Despite the presence of a HEPA filter in hospital 2, rooms in both hospitals showed similar concentrations of potentially pathogenic fungi (P = 0·714). These findings may be explained by the implementation of additional protective measures in hospital 1, emphasizing the importance of such measures in protected environments.

  8. High-temperature superconductivity in one-unit-cell FeSe films

    Science.gov (United States)

    Wang, Ziqiao; Liu, Chaofei; Liu, Yi; Wang, Jian

    2017-04-01

    Since the dramatic enhancement of the superconducting transition temperature (T c) was reported in a one-unit-cell FeSe film grown on a SrTiO3 substrate (1-UC FeSe/STO) by molecular beam epitaxy (MBE), related research on this system has become a new frontier in condensed matter physics. In this paper, we present a brief review on this rapidly developing field, mainly focusing on the superconducting properties of 1-UC FeSe/STO. Experimental evidence for high-temperature superconductivity in 1-UC FeSe/STO, including direct evidence revealed by transport and diamagnetic measurements, as well as other evidence from scanning tunneling microscopy (STM) and angle-resolved photoemission spectroscopy (ARPES), are overviewed. The potential mechanisms of the enhanced superconductivity are also discussed. There are accumulating arguments to suggest that the strengthened Cooper pairing in 1-UC FeSe/STO originates from the interface effects, specifically the charge transfer and coupling to phonon modes in the TiO2 plane. The study of superconductivity in 1-UC FeSe/STO not only sheds new light on the mechanism of high-temperature superconductors with layered structures, but also provides an insight into the exploration of new superconductors by interface engineering.

  9. Giant repeater F-wave in patients with anterior horn cell disorders. Role of motor unit size.

    Science.gov (United States)

    Ibrahim, I K; el-Abd, M A

    1997-01-01

    Conventional F-wave responses as well as single motor unit F-wave responses together with the volitionally recruited motor unit action potentials (MUAP) were studied in hand and feet muscles of 10 healthy subjects and 32 patients with anterior horn cell disorders. The amplitude of the largest F-wave (Fl) was significantly greater in the affected patients compared with healthy subjects. Giant repeater F-wave responses "up to 4 mV" were recorded in muscles having volitionally recruited giant MUAPs. Although, the group mean percentage of motor unit F-wave responses per stimulation in all tested orthodromic MUAPs was significantly decreased in amyotrophic lateral sclerosis patients, the group mean percentage of motor unit F-wave responses per stimulation in all tested orthodromic MUAPs that gave motor unit F-wave response was significantly increased compared with healthy subjects. The responding orthodromic MUAP gave identical motor unit F-wave response, even for complex polyphasic units. Enhanced monosynaptic (H-) reflex, proximal axon reflex (A-wave), and repetitive muscle response as possible explanations for the giant F-wave responses could be discounted. The electrophysiologic behavior of the giant late responses described here fits well with the criteria of F-waves modulated by newly formed distal (and or proximal) axonal branching.

  10. Geometric Dimensioning and Tolerancing. Drafting Module 9. Instructor's Guide.

    Science.gov (United States)

    Missouri Univ., Columbia. Instructional Materials Lab.

    This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. The guide contains a cross-reference table of instructional materials. This unit covers geometric dimensioning and tolerancing. The unit contains the…

  11. Unification in One Dimension

    CERN Document Server

    Jackson, David J

    2016-01-01

    A physical theory of the world is presented under the unifying principle that all of nature is laid out before us and experienced through the passage of time. The one-dimensional progression in time is opened out into a multi-dimensional mathematically consistent flow, with the simplicity of the former giving rise to symmetries of the latter. The act of perception identifies an extended spacetime arena of intermediate dimension, incorporating the symmetry of geometric spatial rotations, against which physical objects are formed and observed. The spacetime symmetry is contained as a subgroup of, and provides a natural breaking mechanism for, the higher general symmetry of time. It will be described how the world of gravitation and cosmology, as well as quantum theory and particle physics, arises from these considerations.

  12. Method card design dimensions

    DEFF Research Database (Denmark)

    Wölfel, Christiane; Merritt, T.

    2013-01-01

    . The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...... and highlights unexplored areas in the design space. The paper concludes with recommendations for the future development of card-based methods for the field of interaction design.......There are many examples of cards used to assist or provide structure to the design process, yet there has not been a thorough articulation of the strengths and weaknesses of the various examples. We review eighteen card-based design tools in order to understand how they might benefit designers...

  13. The fourth Dimension

    CERN Document Server

    Schweitzer, Eugen

    2009-01-01

    In different passages of his dialogues, Plato showed deep mathematically-based physical insights. Regrettably most readers overlooked the respective statements, or they utterly did not understand those hints since they were full of philological fallacious terms. Respectable translators misinterpreted such statements and therefore Plato's respective remarks were not recognized as substantial knowledge. Furthermore, Plato often supplemented such basic remarks by diffusely veiled and varied allusions that were often ironically hidden somewhere in his dialogues by inconspicuous double meanings. However, this mode of intentionally coded discrete communication was generally not understood because such irony is not to everyone's taste. However, the attempts to reconstruct Plato's system on the basis of admittedly individually interpreted double meanings lead to a conclusive mathematical-physical cyclical system of dimensions. Additionally it was possible to assign Plato's system of philosophical ideas analogously to...

  14. Phenomenology of Extra Dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Hewett, J.L.; /SLAC

    2006-11-07

    If the structure of spacetime is different than that readily observed, gravitational physics, particle physics and cosmology are all immediately affected. The physics of extra dimensions offers new insights and solutions to fundamental questions arising in these fields. Novel ideas and frameworks are continuously born and evolved. They make use of string theoretical features and tools and they may reveal if and how the 11-dimensional string theory is relevant to our four-dimensional world. We have outlined some of the experimental observations in particle and gravitational physics as well as astrophysical and cosmological considerations that can constrain or confirm these scenarios. These developing ideas and the wide interdisciplinary experimental program that is charted out to investigate them mark a renewed effort to describe the dynamics behind spacetime. We look forward to the discovery of a higher dimensional spacetime.

  15. Qubits from extra dimensions

    CERN Document Server

    Lévay, Péter

    2011-01-01

    We link the recently discovered black hole-qubit correspondence to the structure of extra dimensions. In particular we show that for toroidal compactifications of type IIB string theory simple qubit systems arise naturally from the geometrical data of the tori parametrized by the moduli. We also generalize the recently suggested idea of the attractor mechanism as a distillation procedure of GHZ-like entangled states on the event horizon, to moduli stabilization for flux attractors in F-theory compactifications on elliptically fibered Calabi-Yau four-folds. Finally using a simple example we show that the natural arena for qubits to show up is an embedded one within the realm of fermionic entanglement of quantum systems with indistinguishable constituents.

  16. Flowing to four dimensions

    CERN Document Server

    Dudas, E; Rubakov, V A

    2006-01-01

    We analyze the properties of a model with four-dimensional brane-localized Higgs type potential of a six dimensional scalar field satisfying the Dirichlet boundary condition on the boundary of a transverse two-dimensional compact space. The regularization of the localized couplings generates classical renormalization group running. A tachyonic mass parameter grows in the infrared, in analogy with the QCD gauge coupling in four dimensions. We find a phase transition at a critical value of the bare mass parameter such that the running mass parameter becomes large in the infrared precisely at the compactification scale. Below the critical coupling, the theory is in symmetric phase, whereas above it spontaneous symmetry breaking occurs. Close to the phase transition point there is a very light mode in the spectrum. The massive Kaluza-Klein spectrum at the critical coupling becomes independent of the UV cutoff.

  17. Interactive Dimensioning of Parametric Models

    KAUST Repository

    Kelly, T.

    2015-05-01

    We propose a solution for the dimensioning of parametric and procedural models. Dimensioning has long been a staple of technical drawings, and we present the first solution for interactive dimensioning: A dimension line positioning system that adapts to the view direction, given behavioral properties. After proposing a set of design principles for interactive dimensioning, we describe our solution consisting of the following major components. First, we describe how an author can specify the desired interactive behavior of a dimension line. Second, we propose a novel algorithm to place dimension lines at interactive speeds. Third, we introduce multiple extensions, including chained dimension lines, controls for different parameter types (e.g. discrete choices, angles), and the use of dimension lines for interactive editing. Our results show the use of dimension lines in an interactive parametric modeling environment for architectural, botanical, and mechanical models. © 2015 The Author(s) Computer Graphics Forum © 2015 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

  18. Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties

    NARCIS (Netherlands)

    Ahmadi, S.M.; Yavari, S.A.; Wauthle, R.; Pouran, B.; Schrooten, J.; Weinans, H.; Zadpoor, A.A.

    2015-01-01

    It is known that the mechanical properties of bone-mimicking porous biomaterials are a function of the morphological properties of the porous structure, including the configuration and size of the repeating unit cell from which they are made. However, the literature on this topic is limited, primari

  19. Theoretical characterization and design of small molecule donor material containing naphthodithiophene central unit for efficient organic solar cells.

    Science.gov (United States)

    Duan, Yu-Ai; Geng, Yun; Li, Hai-Bin; Jin, Jun-Ling; Wu, Yong; Su, Zhong-Min

    2013-07-15

    To seek for high-performance small molecule donor materials used in heterojunction solar cell, six acceptor-donor-acceptor small molecules based on naphtho[2,3-b:6,7-b']dithiophene (NDT) units with different acceptor units were designed and characterized using density functional theory and time-dependent density functional theory. Their geometries, electronic structures, photophysical, and charge transport properties have been scrutinized comparing with the reported donor material NDT(TDPP)2 (TDPP  =  thiophene-capped diketopyrrolopyrrole). The open circuit voltage (V(oc)), energetic driving force(ΔE(L-L)), and exciton binding energy (E(b)) were also provided to give an elementary understanding on their cell performance. The results reveal that the frontier molecular orbitals of 3-7 match well with the acceptor material PC61 BM, and compounds 3-5 were found to exhibit the comparable performances to 1 and show promising potential in organic solar cells. In particular, comparing with 1, system 7 with naphthobisthiadiazole acceptor unit displays broader absorption spectrum, higher V(oc), lower E(b), and similar carrier mobility. An in-depth insight into the nature of the involved excited states based on transition density matrix and charge density difference indicates that all S1 states are mainly intramolecular charge transfer states with the charge transfer from central NDT unit to bilateral acceptor units, and also imply that the exciton of 7 can be dissociated easily due to its large extent of the charge transfer. In a word, 7 maybe superior to 1 and may act as a promising donor candidate for organic solar cell. Copyright © 2013 Wiley Periodicals, Inc.

  20. Thermal dimension of quantum spacetime

    CERN Document Server

    Amelino-Camelia, Giovanni; Gubitosi, Giulia; Santos, Grasiele

    2016-01-01

    Recent results suggest that a crucial crossroad for quantum gravity is the characterization of the effective dimension of spacetime at short distances, where quantum properties of spacetime become significant. This is relevant in particular for various scenarios of "dynamical dimensional reduction" which have been discussed in the literature. We are here concerned with the fact that the related research effort has been based exclusively on analyses of the "spectral dimension", which involves an unphysical Euclideanization of spacetime and is highly sensitive to the off-shell properties of a theory. As here shown, different formulations of the same physical theory can have wildly different spectral dimension. We propose that dynamical dimensional reduction should be described in terms of the "thermal dimension" which we here introduce, a notion that only depends on the physical content of the theory. We analyze a few models with dynamical reduction both of the spectral dimension and of our thermal dimension, f...

  1. High-contrast three-dimensional imaging of the Arabidopsis leaf enables the analysis of cell dimensions in the epidermis and mesophyll

    Directory of Open Access Journals (Sweden)

    Granier Christine

    2010-07-01

    Full Text Available Abstract Background Despite the wide spread application of confocal and multiphoton laser scanning microscopy in plant biology, leaf phenotype assessment still relies on two-dimensional imaging with a limited appreciation of the cells' structural context and an inherent inaccuracy of cell measurements. Here, a successful procedure for the three-dimensional imaging and analysis of plant leaves is presented. Results The procedure was developed based on a range of developmental stages, from leaf initiation to senescence, of soil-grown Arabidopsis thaliana (L. Heynh. Rigorous clearing of tissues, made possible by enhanced leaf permeability to clearing agents, allowed the optical sectioning of the entire leaf thickness by both confocal and multiphoton microscopy. The superior image quality, in resolution and contrast, obtained by the latter technique enabled the three-dimensional visualisation of leaf morphology at the individual cell level, cell segmentation and the construction of structural models. Image analysis macros were developed to measure leaf thickness and tissue proportions, as well as to determine for the epidermis and all layers of mesophyll tissue, cell density, volume, length and width. For mesophyll tissue, the proportion of intercellular spaces and the surface areas of cells were also estimated. The performance of the procedure was demonstrated for the expanding 6th leaf of the Arabidopsis rosette. Furthermore, it was proven to be effective for leaves of another dicotyledon, apple (Malus domestica Borkh., which has a very different cellular organisation. Conclusions The pipeline for the three-dimensional imaging and analysis of plant leaves provides the means to include variables on internal tissues in leaf growth studies and the assessment of leaf phenotypes. It also allows the visualisation and quantification of alterations in leaf structure alongside changes in leaf functioning observed under environmental constraints. Data

  2. Definition of a simple statistical parameter for the quantification of orientation in two dimensions: application to cells on grooves of nanometric depths.

    Science.gov (United States)

    Davidson, P; Bigerelle, M; Bounichane, B; Giazzon, M; Anselme, K

    2010-07-01

    Contact guidance is generally evaluated by measuring the orientation angle of cells. However, statistical analyses are rarely performed on these parameters. Here we propose a statistical analysis based on a new parameter sigma, the orientation parameter, defined as the dispersion of the distribution of orientation angles. This parameter can be used to obtain a truncated Gaussian distribution that models the distribution of the data between -90 degrees and +90 degrees. We established a threshold value of the orientation parameter below which the data can be considered to be aligned within a 95% confidence interval. Applying our orientation parameter to cells on grooves and using a modelling approach, we established the relationship sigma=alpha(meas)+(52 degrees -alpha(meas))/(1+C(GDE)R) where the parameter C(GDE) represents the sensitivity of cells to groove depth, and R the groove depth. The values of C(GDE) obtained allowed us to compare the contact guidance of human osteoprogenitor (HOP) cells across experiments involving different groove depths, times in culture and inoculation densities. We demonstrate that HOP cells are able to identify and respond to the presence of grooves 30, 100, 200 and 500 nm deep and that the deeper the grooves, the higher the cell orientation. The evolution of the sensitivity (C(GDE)) with culture time is roughly sigmoidal with an asymptote, which is a function of inoculation density. The sigma parameter defined here is a universal parameter that can be applied to all orientation measurements and does not require a mathematical background or knowledge of directional statistics. Copyright 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  3. Fermi surface properties of paramagnetic NpCd{sub 11} with a large unit cell

    Energy Technology Data Exchange (ETDEWEB)

    Homma, Yoshiya; Aoki, Dai; Shiokawa, Yoshinobu [Institute for Materials Research, Tohoku University, Oarai, Ibaraki 311-1313 (Japan); Haga, Yoshinori; Sakai, Hironori; Ikeda, Shugo; Yamamoto, Etsuji; Nakamura, Akio; Onuki, Yoshichika [Advanced Science Research Center, Japan Atomic Energy Agency, Tokai, Ibaraki 319-1195 (Japan); Settai, Rikio [Graduate School of Science, Osaka University, Toyonaka, Osaka 560-0043 (Japan); Takeuchi, Tetsuya [Cryogenic Center, Osaka University, Toyonaka, Osaka 560-0043 (Japan); Yamagami, Hiroshi, E-mail: yhomma@imr.tohoku.ac.jp [Department of Physics, Faculty of Science, Kyoto Sangyo University, Kyoto 603-8555 (Japan)

    2010-03-15

    We succeeded in growing a high-quality single crystal of NpCd{sub 11} with the cubic BaHg{sub 11}-type structure by the Cd-self flux method. The lattice parameter of a = 9.2968(2) A and crystallographic positions of the atoms were determined by x-ray single-crystal structure analysis. From the results of the magnetic susceptibility and specific heat experiments, this compound is found to be a 5f-localized paramagnet with the singlet ground state in the crystalline electric field (CEF) scheme. Fermi surface properties were measured using the de Haas-van Alphen (dHvA) technique. Long-period oscillations were observed in the dHvA frequency range of 9.1 x 10{sup 5} to 1.9 x 10{sup 7} Oe, indicating small cross-sectional areas of Fermi surfaces, which is consistent with a small Brillouin zone based on a large unit cell. From the results of dHvA and magnetoresistance experiments, the Fermi surface of NpCd{sub 11} is found to consist of many kinds of closed Fermi surfaces and a multiply-connected-like Fermi surface, although the result of energy band calculations based on the 5f-localized Np{sup 3+}(5f{sup 4}) configuration reveals the existence of only closed Fermi surfaces. The corresponding cyclotron effective mass is small, ranging from 0.1 to 0.7 m{sub 0}, which is consistent with a small electronic specific heat coefficient {gamma} {approx_equal} 10mJ/K{sup 2{center_dot}}mol, revealing no hybridization between the 5f electrons and conduction electrons.

  4. Anomalous Dimensions of Conformal Baryons

    DEFF Research Database (Denmark)

    Pica, Claudio; Sannino, Francesco

    2016-01-01

    We determine the anomalous dimensions of baryon operators for the three color theory as function of the number of massless flavours within the conformal window to the maximum known order in perturbation theory. We show that the anomalous dimension of the baryon is controllably small, within...... the $\\delta$-expansion, for a wide range of number of flavours. We also find that this is always smaller than the anomalous dimension of the fermion mass operator. These findings challenge the partial compositeness paradigm....

  5. Beta Function and Anomalous Dimensions

    CERN Document Server

    Pica, Claudio

    2010-01-01

    We demonstrate that it is possible to determine the coefficients of an all-order beta function linear in the anomalous dimensions using as data the two-loop coefficients together with the first one of the anomalous dimensions which are universal. The beta function allows to determine the anomalous dimension of the fermion masses at the infrared fixed point, and the resulting values compare well with the lattice determinations.

  6. Anomalous Dimensions of Conformal Baryons

    CERN Document Server

    Pica, Claudio

    2016-01-01

    We determine the anomalous dimensions of baryon operators for the three color theory as function of the number of massless flavours within the conformal window to the maximum known order in perturbation theory. We show that the anomalous dimension of the baryon is controllably small for a wide range of number of flavours. We also find that this is always smaller than the anomalous dimension of the fermion mass operator. These findings challenge the partial compositeness paradigm.

  7. In vitro fertilization and stem cell harvesting from human embryos: the law and practice in the United States.

    Science.gov (United States)

    Hook, C Christopher

    2010-07-01

    The challenges before science and medicine are these: science must explore the natural world as thoroughly as possible, while still honoring, protecting, serving and preserving the subject of its investigations, and the human beings for whom it is a tool; medicine must confront disease and disability as effectively as possible, while also honoring, protecting, and preserving those beings for whom it serves - all of those beings, not just some, or even most, at the potential expense of others. These goals are challenged by embryo-destructive human embryonic stem cell research. The human embryo is a human being as clearly defined by embryology, and as such should be protected by the codes governing human subject research. However, because of the "potential" benefits offered by pluripotent stem cells, coupled with abortion politics and a very poorly regulated infertility industry, United States governmental advisory commissions and the scientific, medical, and political communities have attempted to define away the humanity of the human embryo, with a few notable exceptions. Because infertility treatments in the United States are poorly regulated, there are large numbers of supernumerary embryos in cryopreservation. However, only a tiny portion of these will ever be potentially available for research, and thus are not a realistic source of the cells necessary to provide treatments to the millions who might benefit from proposed stem cell based therapies. Cloning will not be the answer either, given the millions of women who must be exploited to provide sufficient numbers of eggs to generate the cloned cell lines. Moreover, the disposition decisions parents must make for their extra embryos are often agonizing, and not uncommonly change. The use of supernumerary embryos as a source for human embryonic stem cells is unethical, will never be a sufficient source for the medical treatments expected from stem cell research, and is often a source of great distress for the

  8. In vitro fertilization and stem cell harvesting from human embryos: the law and practice in the United States

    Directory of Open Access Journals (Sweden)

    C. Christopher Hook

    2010-07-01

    Full Text Available The challenges before science and medicine are these: science must explore the natural world as thoroughly as possible, while still honoring, protecting, serving and preserving the subject of its investigations, and the human beings for whom it is a tool; medicine must confront disease and disability as effectively as possible, while also honoring, protecting, and preserving those beings for whom it serves – all of those beings, not just some, or even most, at the potential expense of others. These goals are challenged by embryo-destructive human embryonic stem cell research. The human embryo is a human being as clearly defined by embryology, and as such should be protected by the codes governing human subject research. However, because of the “potential” benefits offered by pluripotent stem cells, coupled with abortion politics and a very poorly regulated infertility industry, United States governmental advisory commissions and the scientific, medical, and political communities have attempted to define away the humanity of the human embryo, witha few notable exceptions. Because infertility treatments in the United States are poorly regulated, there are large numbersof supernumerary embryos in cryopreservation. However, only a tiny portion of these will ever be potentially available for research, and thus are not a realistic source of the cells necessary to provide treatments to the millions who might benefit from proposed stem cell based therapies. Cloning willnot be the answer either, given the millions of women who must be exploited to provide sufficient numbers of eggs to generate the cloned cell lines. Moreover, the disposition decisions parents must make for their extra embryos are often agonizing, and not uncommonly change.The use of supernumerary embryos as a source for human embryonic stem cells is unethical, will never be a sufficient source for the medical treatments expected from stem cell research, and is often a source of

  9. Frequency and Risk Factors Associated with Cord Graft Failure after Transplant with Single-Unit Umbilical Cord Cells Supplemented by Haploidentical Cells with Reduced-Intensity Conditioning.

    Science.gov (United States)

    Tsai, Stephanie B; Liu, Hongtao; Shore, Tsiporah; Fan, Yun; Bishop, Michael; Cushing, Melissa M; Gergis, Usama; Godley, Lucy; Kline, Justin; Larson, Richard A; Martinez, Guadalupe; Mayer, Sebastian; Odenike, Olatoyosi; Stock, Wendy; Wickrema, Amittha; van Besien, Koen; Artz, Andrew S

    2016-06-01

    Delayed engraftment and cord graft failure (CGF) are serious complications after unrelated cord blood (UCB) hematopoietic stem cell transplantation (HSCT), particularly when using low-cell-dose UCB units. The haplo-cord HSCT approach allows the use of a lower dose single UCB unit by co-infusion of a CD34(+) selected haploidentical graft, which provides early transient engraftment while awaiting durable UCB engraftment. We describe the frequency, complications, and risk factors of CGF after reduced-intensity conditioning haplo-cord HSCT. Among 107 patients who underwent haplo-cord HSCT, 94 were assessable for CGF, defined as risk of CGF. We conclude that assessing chimerism at day 30 may foretell impending CGF, and avoidance of high haploidentical cell doses may reduce risk of CGF after haplo-cord HSCT. However, long-term survival is possible after CGF because of predominant haploidentical or mixed chimerism and hematopoietic function.

  10. Flying in Two Dimensions

    CERN Document Server

    Prakash, Manu

    2011-01-01

    Diversity and specialization of behavior in insects is unmatched. Insects hop, walk, run, jump, row, swim, glide and fly to propel themselves in a variety of environments. We have uncovered an unusual mode of propulsion of aerodynamic flight in two dimensions in Waterlilly Beetles \\emph{(Galerucella)}. The adult beetles, often found in water lilly ponds, propel themselves strictly in a two-dimensional plane on the surface of water via flapping wing flight. Here we analyze the aerodynamics of this peculiar flight mode with respect to forces exerted on the organism during flight. The complexity of 2-D flight is captured by accounting for additional forces beyond gravitational, thrust, lift and drag, exerted on the insect body in 3D flight. Understanding this constrained propulsion mode requires accounting for viscous drag, surface tension, buoyancy force, and capillary-wave drag. Moreover, dramatic differences exist in the magnitude of the resultant forces in 2D vs. 3D flight. Here, in this fluid dynamics video...

  11. Physics in one dimension

    Science.gov (United States)

    van Houselt, A.; Schäfer, J.; Zandvliet, H. J. W.; Claessen, R.

    2013-01-01

    With modern microelectronics moving towards smaller and smaller length scales on the (sub-) nm scale, quantum effects (apart from band structure and band gaps) have begun to play an increasingly important role. This especially concerns dimensional confinement to 2D (high electron mobility transistors and integer/fractional quantum Hall effect physics, graphene and topological insulators) and 1D (with electrical connections eventually reaching the quantum limit). Recent developments in the above-mentioned areas have revealed that the properties of electron systems become increasingly exotic as one progresses from the 3D case into lower dimensions. As compared to 2D electron systems, much less experimental progress has been achieved in the field of 1D electron systems. The main reason for the lack of experimental results in this field is related to the difficulty of realizing 1D electron systems. Atom chains created in quantum mechanical break junction set-ups are too short to exhibit the typically 1D signatures. As an alternative, atomic chains can be produced on crystal surfaces, either via assembling them one-by-one using a scanning tunnelling microscope or via self-assembly. The drawback of the latter systems is that the atomic chains are not truly 1D since they are coupled to the underlying crystal and sometimes even to the neighbouring chains. In retrospect, this coupling turns out to be an absolute necessity in the experiment since true 1D systems are disordered at any non-zero temperature [1]. The coupling to the crystal and/or neighbouring chains shifts the phase transition, for example, a Peierls instability, to a non-zero temperature and thus allows experiments to be performed in the ordered state. Here, we want to emphasize that the electronic properties of the 1D electron system are fundamentally different from its 2D and 3D counterparts. The Fermi liquid theory, which is applicable to 2D and 3D electron systems, breaks down spectacularly in the 1D case

  12. Development of integrated DMFC and PEM fuel cell units. Final report; Udvikling af integrerede DMFC og PEM braendselscelle enheder. Slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    Odgaard, M. (IRD Fuel Cell Technology, Svendborg (DK))

    2007-06-15

    The 36-month long project 'Development of integrated DMFC and PEM fuel cell units' has been completed. The project goal was to develop a completely new MEA concept for integrated PEM and DMFC unit cells with enhanced power density and in this way obtain a price reduction. The integrated unit cell consists of a MEA, a gas diffusion layer with flow fields completed with bipolar plates and seals. The main focus of the present project was to: 1) Develop new catalyst materials fabricated by the use of FSD (flame spray deposition method). 2) Optimisation of the state-of-the-art MEA materials and electrode structure. 3) Implementation of a model to account for the CO poisoning of PEM fuel cells. Results and progress obtained in the project established that the individual unit cell components were able to meet and follow the road map of LT-PEM FC regarding electrode catalyst loading and fulfilled the targets for Year 2006. The project has resulted in some important successes. The highlights are as follows: The project has resulted in some important successes. The highlights are as follows: 1) MEA structure knowledge acquired in the project provide a sound basis for further progress. 2) A novel method for the synthesis of electrode by using flame spray synthesis was explored. 3) Electrochemical and catalytic behaviours of catalysts activity for CH{sub 3}OH explored. 4) Implementation of a sub model to account for the CO poisoning of PEM FC has been developed. 5) Numerical study of the flow distribution in FC manifolds was developed and completed with experimental data. 6) The electrode catalyst loading targets for year 2006 achieved. 7) The DMFC MEA performance has been improved by 35%. 8) Optimisation of the MEAs fabrication process has been successfully developed. 9) A new simple flow field design has been designed. 10) A procedure for integrated seals has been developed (au)

  13. Exterior dimension of fat fractals

    Science.gov (United States)

    Grebogi, C.; Mcdonald, S. W.; Ott, E.; Yorke, J. A.

    1985-01-01

    Geometric scaling properties of fat fractal sets (fractals with finite volume) are discussed and characterized via the introduction of a new dimension-like quantity which is called the exterior dimension. In addition, it is shown that the exterior dimension is related to the 'uncertainty exponent' previously used in studies of fractal basin boundaries, and it is shown how this connection can be exploited to determine the exterior dimension. Three illustrative applications are described, two in nonlinear dynamics and one dealing with blood flow in the body. Possible relevance to porous materials and ballistic driven aggregation is also noted.

  14. Warped Geometry in Higher Dimensions with an Orbifold Extra Dimension

    CERN Document Server

    Ito, M

    2001-01-01

    We solve the Einstein equations in higher dimensions with warped geometry where an extra dimension is assumed to have orbifold symmetry, $S^{1}/Z_{2}$. The setup we consider here is an extension to (5+D)-dimensions of the 5-dimensional Randall-Sundrum model, and two hidden brane and observable brane are fixed on orbifold. Anisotropic cosmological constant on each brane with (4+D)-dimensional spacetime is assumed, and the warped metric of 4-dimensions is generally different from one of extra D-dimensions. It is pointed out that the form of metric depends on both the sign of bulk cosmological constant and initial condition of brane world. Furthermore, anisotropic cosmological constant on each brane can be realized due to the presence of brane.

  15. THE FEATURES OF CONNEXINS EXPRESSION IN THE CELLS OF NEUROVASCLAR UNIT IN NORMAL CONDITIONS AND HYPOXIA IN VITRO

    Directory of Open Access Journals (Sweden)

    A. V. Morgun

    2014-01-01

    Full Text Available The aim of this research was to assess a role of connexin 43 (Cx43 and associated molecule CD38 in the regulation of cell-cell interactions in the neurovascular unit (NVU in vitro in physiological conditions and in hypoxia.Materials and methods. The study was done using the original neurovascular unit model in vitro. The NVU consisted of three cell types: neurons, astrocytes, and cerebral endothelial cells derived from rats. Hypoxia was induced by incubating cells with sodium iodoacetate for 30 min at37 °C in standard culture conditions.Results. We investigated the role of connexin 43 in the regulation of cell interactions within the NVU in normal and hypoxic injury in vitro. We found that astrocytes were characterized by high levels of expression of Cx43 and low level of CD38 expression, neurons demonstrated high levels of CD38 and low levels of Cx43. In hypoxic conditions, the expression of Cx43 and CD38 in astrocytes markedly increased while CD38 expression in neurons decreased, however no changes were found in endothelial cells. Suppression of Cx43 activity resulted in down-regulation of CD38 in NVU cells, both in physiological conditions and at chemical hypoxia.Conclusion. Thus, the Cx-regulated intercellular NAD+-dependent communication and secretory phenotype of astroglial cells that are the part of the blood-brain barrier is markedly changed in hypoxia.

  16. Tool for Generation of MAC/GMC Representative Unit Cell for CMC/PMC Analysis

    Science.gov (United States)

    Murthy, Pappu L. N.; Pineda, Evan J.

    2016-01-01

    This document describes a recently developed analysis tool that enhances the resident capabilities of the Micromechanics Analysis Code with the Generalized Method of Cells (MAC/GMC) 4.0. This tool is especially useful in analyzing ceramic matrix composites (CMCs), where higher fidelity with improved accuracy of local response is needed. The tool, however, can be used for analyzing polymer matrix composites (PMCs) as well. MAC/GMC 4.0 is a composite material and laminate analysis software developed at NASA Glenn Research Center. The software package has been built around the concept of the generalized method of cells (GMC). The computer code is developed with a user friendly framework, along with a library of local inelastic, damage, and failure models. Further, application of simulated thermomechanical loading, generation of output results, and selection of architectures to represent the composite material have been automated to increase the user friendliness, as well as to make it more robust in terms of input preparation and code execution. Finally, classical lamination theory has been implemented within the software, wherein GMC is used to model the composite material response of each ply. Thus, the full range of GMC composite material capabilities is available for analysis of arbitrary laminate configurations as well. The primary focus of the current effort is to provide a graphical user interface (GUI) capability that generates a number of different user-defined repeating unit cells (RUCs). In addition, the code has provisions for generation of a MAC/GMC-compatible input text file that can be merged with any MAC/GMC input file tailored to analyze composite materials. Although the primary intention was to address the three different constituents and phases that are usually present in CMCs-namely, fibers, matrix, and interphase-it can be easily modified to address two-phase polymer matrix composite (PMC) materials where an interphase is absent. Currently, the

  17. Indium phosphide solar cell research in the United States: Comparison with non-photovoltaic sources

    Science.gov (United States)

    Weinberg, I.; Swartz, C. K.; Hart, R. E., Jr.

    1989-01-01

    Highlights of the InP solar cell research program are presented. Homojunction cells with efficiencies approaching 19 percent are demonstrated, while 17 percent is achieved for ITO/InP cells. The superior radiation resistance of the two latter cell configurations over both Si and GaAs cells has been shown. InP cells aboard the LIPS3 satellite show no degradation after more than a year in orbit. Computed array specific powers are used to compare the performance of an InP solar cell array to solar dynamic and nuclear systems.

  18. Tunable Multifunctional Thermal Metamaterials: Manipulation of Local Heat Flux via Assembly of Unit-Cell Thermal Shifters.

    Science.gov (United States)

    Park, Gwanwoo; Kang, Sunggu; Lee, Howon; Choi, Wonjoon

    2017-01-20

    Thermal metamaterials, designed by transformation thermodynamics are artificial structures that can actively control heat flux at a continuum scale. However, fabrication of them is very challenging because it requires a continuous change of thermal properties in materials, for one specific function. Herein, we introduce tunable thermal metamaterials that use the assembly of unit-cell thermal shifters for a remarkable enhancement in multifunctionality as well as manufacturability. Similar to the digitization of a two-dimensional image, designed thermal metamaterials by transformation thermodynamics are disassembled as unit-cells thermal shifters in tiny areas, representing discretized heat flux lines in local spots. The programmed-reassembly of thermal shifters inspired by LEGO enable the four significant functions of thermal metamaterials-shield, concentrator, diffuser, and rotator-in both simulation and experimental verification using finite element method and fabricated structures made from copper and PDMS. This work paves the way for overcoming the structural and functional limitations of thermal metamaterials.

  19. Surface and Interface Properties of 10–12 Unit Cells Thick Sputter Deposited Epitaxial CeO2 Films

    Directory of Open Access Journals (Sweden)

    L. V. Saraf

    2008-01-01

    Full Text Available Ultrathin and continuous epitaxial films with relaxed lattice strain can potentially maintain more of its bulk physical and chemical properties and are useful as buffer layers. We study surface, interface, and microstructural properties of ultrathin (∼10–12 unit cells thick epitaxial ceria films grown on single crystal YSZ substrates. The out-of -plane and in-plane lattice parameters indicate relaxation in the continuous film due to misfit dislocations seen by high-resolution transmission electron microscopy (HRTEM and substrate roughness of ∼1-2 unit cells, confirmed by atomic force microscopy and HRTEM. A combination of secondary sputtering, lattice mismatch, substrate roughness, and surface reduction creating secondary phase was likely the cause of surface roughness which should be reduced to a minimum level for effective use of it as buffer layers.

  20. Tunable Multifunctional Thermal Metamaterials: Manipulation of Local Heat Flux via Assembly of Unit-Cell Thermal Shifters

    Science.gov (United States)

    Park, Gwanwoo; Kang, Sunggu; Lee, Howon; Choi, Wonjoon

    2017-01-01

    Thermal metamaterials, designed by transformation thermodynamics are artificial structures that can actively control heat flux at a continuum scale. However, fabrication of them is very challenging because it requires a continuous change of thermal properties in materials, for one specific function. Herein, we introduce tunable thermal metamaterials that use the assembly of unit-cell thermal shifters for a remarkable enhancement in multifunctionality as well as manufacturability. Similar to the digitization of a two-dimensional image, designed thermal metamaterials by transformation thermodynamics are disassembled as unit-cells thermal shifters in tiny areas, representing discretized heat flux lines in local spots. The programmed-reassembly of thermal shifters inspired by LEGO enable the four significant functions of thermal metamaterials—shield, concentrator, diffuser, and rotator—in both simulation and experimental verification using finite element method and fabricated structures made from copper and PDMS. This work paves the way for overcoming the structural and functional limitations of thermal metamaterials. PMID:28106156

  1. Compact Circularly Polarized Patch Antenna Using a Composite Right/Left-Handed Transmission Line Unit-Cell

    Directory of Open Access Journals (Sweden)

    L. Geng

    2013-04-01

    Full Text Available A compact circularly polarized (CP patch antenna using a composite right/left-handed (CRLH transmission line (TL unit-cell is proposed. The CRLH TL unit-cell includes a complementary split ring resonator (CSRR for shunt inductance and a gap loaded with a circular-shaped slot for series capacitance. The CSRR can decrease the TM10 mode resonance frequency, thus reducing the electrical size of the proposed antenna. In addition, the asymmetry of the CSRR brings about the TM01 mode, which can be combined with the TM10 mode by changing the slot radius. The combination of these two orthogonal modes with 90° phase shift makes the proposed antenna provide a CP property. The experimental results show that the proposed antenna has a wider axial ratio bandwidth and a smaller electrical size than the reported CP antennas. Moreover, the proposed antenna is designed without impedance transformer, 90° phase shift, dual feed and ground via.

  2. Interfacing of science, medicine and law: The stem cell patent controversy in the United States and the European Union

    Directory of Open Access Journals (Sweden)

    Sonya eDavey

    2015-11-01

    Full Text Available The patent eligibility of stem cells – particularly those derived from human embryos – has long been under debate in both the scientific and legal communities. On the basis of moral grounds, the European Patent Office (EPO has refrained from granting patents for stem cells obtained through the destruction of human embryos. On the contrary, the United States Patent and Trademark Office (USPTO has historically granted patents regarding the isolation and use of human embryonic and other stem cells. To date, these US patents remain valid despite an increasing onslaught of challenges in court. However, recent precedents established in US courts significantly narrow the scope of patent eligibility within biotechnology. This article compares the implications of recent legal changes on stem cell patent eligibility between the EU and US.

  3. Red cell storage age policy for patients with sickle cell disease: A survey of transfusion service directors in the United States.

    Science.gov (United States)

    Karafin, Matthew S; Singavi, Arun K; Irani, Mehraboon S; Puca, Kathleen E; Baumann Kreuziger, Lisa; Simpson, Pippa; Field, Joshua J

    2016-02-01

    In patients with sickle cell disease (SCD), the effects of the red cell storage lesion are not well defined. The objective of this study was to determine the prevalence of transfusion services that limit red cell units by storage age for patients with SCD. We developed a 22 question survey of transfusion service director opinions and their corresponding blood bank policies. Target subjects were systematically identified on the AABB website. Responses were recorded in SurveyMonkey and summarized using standard statistical techniques. Ninety transfusion service directors responded to the survey. Response rate was 22%. Only 23% of respondents had storage age policies in place for patients with SCD, even though 36% of respondents consider older units to be potentially harmful in this patient population. Of those with a policy, a less-than 15 day storage age requirement was most often used (75%), but practices varied, and most respondents (65%) agreed that evidence-based guidelines regarding storage age are needed for patients with SCD. Policies, practices and opinions about the risks of older units for patients with SCD vary. As patients with SCD may have unique susceptibilities to features of the red cell storage lesion, prospective studies in this population are needed to determine best practice.

  4. Saliency of social comparison dimensions

    NARCIS (Netherlands)

    Kuyper, H.

    2007-01-01

    The present article discusses a theory of the saliency of social comparison dimensions and presents the results of an experiment about the effects of two different experimental situations on the saliency of exterior, task-related and socio-emotional dimensions. Saliency was operationalized with a

  5. Dimensioning, Tolerancing, and Machine Finishes.

    Science.gov (United States)

    Adams, George C.

    Intended for use with the vocational education student interested in technical drawing, this guide provides answers to questions relating to dimensioning and tolerancing machine drawings. It also gives examples of standard dimensioning practices, tolerancing applications, and finish applications. The problems and examples presented are based on…

  6. Anomalous Dimensions of Conformal Baryons

    DEFF Research Database (Denmark)

    Pica, Claudio; Sannino, Francesco

    2016-01-01

    We determine the anomalous dimensions of baryon operators for the three color theory as function of the number of massless flavours within the conformal window to the maximum known order in perturbation theory. We show that the anomalous dimension of the baryon is controllably small, within...

  7. Mathematics Teachers' Criteria of Dimension

    Science.gov (United States)

    Ural, Alattin

    2014-01-01

    The aim of the study is to determine mathematics teachers' decisions about dimensions of the geometric figures, criteria of dimension and consistency of decision-criteria. The research is a qualitative research and the model applied in the study is descriptive method on the basis of general scanning model. 15 mathematics teachers attended the…

  8. The Hausdorff Dimension of Sections

    Institute of Scientific and Technical Information of China (English)

    Min NIU; Lifeng XI

    2007-01-01

    The notion of finite-type open set condition is defined to calculate the Hausdorff dimensions of the sections of some self-similar sets, such as the dimension of intersection of the Koch curve and the line x = a with a ∈(Q).

  9. Anomalous Dimensions of Conformal Baryons

    DEFF Research Database (Denmark)

    Pica, Claudio; Sannino, Francesco

    2016-01-01

    We determine the anomalous dimensions of baryon operators for the three color theory as function of the number of massless flavours within the conformal window to the maximum known order in perturbation theory. We show that the anomalous dimension of the baryon is controllably small, within the $...

  10. Beta Function and Anomalous Dimensions

    DEFF Research Database (Denmark)

    Pica, Claudio; Sannino, Francesco

    2011-01-01

    We demonstrate that it is possible to determine the coefficients of an all-order beta function linear in the anomalous dimensions using as data the two-loop coefficients together with the first one of the anomalous dimensions which are universal. The beta function allows to determine the anomalou...

  11. On the Effect of Unit-Cell Parameters in Predicting the Elastic Response of Wood-Plastic Composites

    Directory of Open Access Journals (Sweden)

    Fatemeh Alavi

    2013-01-01

    Full Text Available This paper presents a study on the effect of unit-cell geometrical parameters in predicting elastic properties of a typical wood plastic composite (WPC. The ultimate goal was obtaining the optimal values of representative volume element (RVE parameters to accurately predict the mechanical behavior of the WPC. For each unit cell, defined by a given combination of the above geometrical parameters, finite element simulation in ABAQUS was carried out, and the corresponding stress-strain curve was obtained. A uniaxial test according to ASTM D638-02a type V was performed on the composite specimen. Modulus of elasticity was determined using hyperbolic tangent function, and the results were compared to the sets of finite element analyses. Main effects of RVE parameters and their interactions were demonstrated and discussed, specially regarding the inclusion of two adjacent wood particles within one unit cell of the material. Regression analysis was performed to mathematically model the RVE parameter effects and their interactions over the modulus of elasticity response. The model was finally employed in an optimization analysis to arrive at an optimal set of RVE parameters that minimizes the difference between the predicted and experimental moduli of elasticity.

  12. Intra-unit-cell magnetic correlations near optimal doping in YBa2Cu3O6.85.

    Science.gov (United States)

    Mangin-Thro, L; Sidis, Y; Wildes, A; Bourges, P

    2015-07-03

    The pseudo-gap phenomenon in copper oxide superconductors is central to any description of these materials as it prefigures the superconducting state itself. A magnetic intra-unit-cell order was found to occur just at the pseudo-gap temperature in four cuprate high-Tc superconducting families. Here we present polarized neutron-scattering measurements of nearly optimally doped YBa2Cu3O6.85, carried out on two different spectrometers, that reveal several features. The intra-unit-cell order consists of finite-sized planar domains that are very weakly correlated along the c axis. At high temperature, only the out-of-plane magnetic components correlate, indicating a strong Ising anisotropy. An aditional in-plane response develops at low temperature, giving rise to an apparent tilt of the magnetic moment. The discovery of these two regimes puts stringent constraints, which are tightly bound to the pseudo-gap physics, on the intrinsic nature of intra-unit-cell order.

  13. Fuel Cell Backup Power Unit Configuration and Electricity Market Participation: A Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Zhiwen [National Renewable Energy Lab. (NREL), Golden, CO (United States); Eichman, Josh [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurtz, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-03-13

    This National Renewable Energy Laboratory industry-inspired Laboratory Directed Research and Development project evaluates the feasibility and economics of using fuel cell backup power systems in cell towers to provide grid services (e.g., balancing, ancillary services, demand response). The work is intended to evaluate the integration of thousands of under-utilized, clean, efficient, and reliable fuel cell systems that are already installed in cell towers for potential grid and ancillary services.

  14. Reaggregation of human, chick, and human embryonic brain cells. Factors influencing the formation of a histiotypic unit.

    Science.gov (United States)

    Lodin, Z; Fleischmannová, V; Hájková, B; Faltin, J; Hartman, J

    1981-01-01

    1. Aggregation of embryo human, mouse, and chick brain cells was studied. The optimum age interval of donors from different species was determined. 2. The significance of different dissociation procedures (mild trypsinisation followed by sieving, trypsinisation + DNA digestion, mechanical dissociation in 1 or 2 steps, and Ca2+ chelation by EGTA) for the rate of aggregation was estimated. A significant reduction of aggregation was observed after one step mechanical dissociation. Nonspecific adhesion of cells on DNA molecules was found only during the first stages of aggregation. 3. The curve of aggregation kinetics follows the curve of floculation kinetics. 90% free cells disappear from the medium after 2 h of aggregation and a large number of microaggregates are formed which condense after 20 to 24 h into compact aggregates. The time course of aggregation was similar for all cells dissociated by different means. Small differences in the rate of aggregation, caused by dissociation procedures, were apparent only during the first stages of aggregation. 4. The histiotypic unit formed by aggregation of human, mouse, and chick embryo brain cells exhibits some common and some specific features. During aggregation a multiple structural reconstruction takes place and a limited number of cells are exchanged or sorted out from aggregates into the medium. 5. The structural organisation of aggregates from differently dissociated cells differs in several aspects. This indicates that membrane surface structures are influenced differently by dissociation and behave differently during distinct stages of aggregation.

  15. Transcription factories: genetic programming in three dimensions.

    Science.gov (United States)

    Edelman, Lucas Brandon; Fraser, Peter

    2012-04-01

    Among the most intensively studied systems in molecular biology is the eukaryotic transcriptional apparatus, which expresses genes in a regulated manner across hundreds of different cell types. Several studies over the past few years have added weight to the concept that transcription takes place within discrete 'transcription factories' assembled inside the cell nucleus. These studies apply innovative technical approaches to gain insights into the molecular constituents, dynamical behaviour and organizational regulators of transcription factories, providing exciting insights into the spatial dimension of transcriptional control.

  16. Preimage entropy dimension of topological dynamical systems

    OpenAIRE

    Lei LIU; Zhou, Xiaomin; Zhou, Xiaoyao

    2014-01-01

    We propose a new definition of preimage entropy dimension for continuous maps on compact metric spaces, investigate fundamental properties of the preimage entropy dimension, and compare the preimage entropy dimension with the topological entropy dimension. The defined preimage entropy dimension holds various basic properties of topological entropy dimension, for example, the preimage entropy dimension of a subsystem is bounded by that of the original system and topologically conjugated system...

  17. Supersymmetry breaking with extra dimensions

    Indian Academy of Sciences (India)

    Fabio Zwirner

    2004-02-01

    This talk reviews some aspects of supersymmetry breaking in the presence of extra dimensions. The first part is a general introduction, recalling the motivations for supersymmetry and extra dimensions, as well as some unsolved problems of four-dimensional models of supersymmetry breaking. The central part is a more focused introduction to a mechanism for (super)symmetry breaking, proposed first by Scherk and Schwarz, where extra dimensions play a crucial role. The last part is devoted to the description of some recent results and of some open problems.

  18. The Ethical Dimension of Innovation

    DEFF Research Database (Denmark)

    Nogueira, Leticia Antunes; Nogueira, Tadeu Fernando

    2014-01-01

    The view of innovation as a positive concept has been deeply rooted in business and academic cultures ever since Schumpeter coined the concept of creative destruction. Even though there is a large body of literature on innovation studies, limited attention has been given to its ethical dimension....... In this chapter, the ethical implications of innovations are illustrated with a case study of “destructive creation” in the food industry, and upon which an argumentative analysis is conducted. The main message of this chapter is that innovations have inherent ethical dimensions and that quality innovations...... depend on systematic consideration of these dimensions in the innovation process....

  19. Critical dimension for chaotic cosmology

    Energy Technology Data Exchange (ETDEWEB)

    Hosoya, Akio; Jensen, L.G.; Stein-Schabes, J.A.

    1987-03-16

    Using the ADM formalism for general relativity the approach to a space-time singularity of a general inhomogeneous universe, in an arbitrary number of dimensions, is studied. The question of whether chaotic behaviour is a generic feature of Einstein's equations, in an arbitrary number of dimensions, is explored. We find that models that contain ten or more spatial dimensions are non-chaotic and their approach toward the initial singularity is monotonic, whereas for those with dimensionality between four and nine their approach is chaotic. A clear geometrical picture is constructed whereby this result can be understood.

  20. Signatures of Large Extra Dimensions

    CERN Document Server

    Hossenfelder, S; Stöcker, H

    2004-01-01

    String theory suggests modifications of our spacetime such as extra dimensions and the existence of a mininal length scale. In models with addidional dimensions, the Planck scale can be lowered to values accessible by future colliders. Effective theories which extend beyond the standart-model by including extra dimensions and a minimal length allow computation of observables and can be used to make testable predictions. Expected effects that arise within these models are the production of gravitons and black holes. Furthermore, the Planck-length is a lower bound to the possible resolution of spacetime which might be reached soon.

  1. Solar Cycle Phase Dependence of Supergranular Fractal Dimension

    Indian Academy of Sciences (India)

    U. Paniveni; V. Krishan; J. Singh; R. Srikanth

    2011-03-01

    We study the complexity of supergranular cells using the intensity patterns obtained from the Kodaikanal Solar Observatory during the 23rd solar cycle. Our data consists of visually identified supergranular cells, from which a fractal dimension for supergranulation is obtained according to the relation ∝ /2, where is the area and is the perimeter of the supergranular cells. We find a difference in the fractal dimension between active and quiet region cells in the ascending phase, during the peak and in the descending phase which is conjectured to be due to the magnetic activity level.

  2. Compressor-expander units for mobile fuel cell systems; Verdichter und Expander fuer mobile Brennstoffzellensysteme

    Energy Technology Data Exchange (ETDEWEB)

    Lang, O. [FEV Motorentechnik GmbH, Aachen (Germany).; Pischinger, S.; Schoenfelder, C.; Steidten, T. [RWTH Aachen (DE). Lehrstuhl fuer Verbrennungskraftmaschinen (VKA)

    2004-08-01

    The air supply of hydrogen-powered fuel cell systems containing PEM fuel cells has a significant impact on their efficiency and mode of operation. Therefore, several mechanical compressors and expanders were examined at the RWTH Aachen. Simulations were then performed to determine the behaviour of the fuel cell system. This article discusses the findings of a project commissioned by the Forschungsvereinigung Verbrennungskraftmaschinen e.V. (FVV). (orig.)

  3. Political dimensions of AIDS.

    Science.gov (United States)

    Blewett, N

    1988-01-01

    World political aspects and the example of Australia as a national political response to AIDS are presented. Global policy on AIDS is influenced by the fact that the AIDS epidemic is the 1st to be largely predictable, that long lag times occur between intervention and measurable events, and by the prompt, professional leadership of WHO, lead by Dr. J. Mann. WHO began a Global Programme on AIDS in 1987, modelled on the responses of Canada and Australia. A world summit of Ministers of Health was convened in January 1988. These moves generated a response qualified by openness, cooperation, hope and common sense. The AIDS epidemic calls for unprecedented involvement of politicians: they must coordinate medical knowledge with community action, deal with public fear, exert strong, rational leadership and avoid quick, appealing counterproductive responses. 3 clear directions must be taken to deal with the epidemic: 1) strong research and education campaigns; 2) close contact with political colleagues, interest groups and the community; 3) a national strategy which enjoins diverse interest groups, with courage, rationality and compassion. In Australia, the AIDS response began with the unwitting infection of 3 infants by blood transfusion. A public information campaign emphasizing a penetrating TV ad campaign was instituted in 1987. Policy discussions were held in all parliamentary bodies. The AIDS epidemic demands rapid, creative responses, a break from traditions in health bureaucracy, continual scrutiny of funding procedures and administrative arrangements. In practical terms in Australia, this meant establishing a special AIDS branch within the Health Advancement Division of the Community Health Department. AIDS issues must remain depoliticized to defuse adversary politics and keep leaders in a united front.

  4. Q Fever Outbreak Among Travelers to Germany Who Received Live Cell Therapy--United States and Canada, 2014.

    Science.gov (United States)

    Robyn, Misha P; Newman, Alexandra P; Amato, Michael; Walawander, Mary; Kothe, Cynthia; Nerone, James D; Pomerantz, Cynthia; Behravesh, Casey Barton; Biggs, Holly M; Dahlgren, F Scott; Pieracci, Emily G; Whitfield, Yvonne; Sider, Doug; Ozaldin, Omar; Berger, Lisa; Buck, Peter A; Downing, Mark; Blog, Debra

    2015-10-02

    During September–November 2014, the New York State Department of Health (NYSDOH) was notified of five New York state residents who had tested seropositive for Coxiella burnetii, the causative agent of Q fever. All five patients had symptoms compatible with Q fever (e.g., fever, fatigue, chills, and headache) and a history of travel to Germany to receive a medical treatment called "live cell therapy" (sometimes called "fresh cell therapy") in May 2014. Live cell therapy is the practice of injecting processed cells from organs or fetuses of nonhuman animals (e.g., sheep) into human recipients. It is advertised to treat a variety of health conditions. This practice is unavailable in the United States; however, persons can travel to foreign locations to receive injections. Local health departments interviewed the patients, and NYSDOH notified CDC and posted a report on CDC’s Epidemic Information Exchange to solicit additional cases. Clinical and exposure information for each patient was reported to the Robert Koch Institute in Germany, which forwarded the information to local health authorities. A Canada resident who also received live cell therapy in May 2014 was diagnosed with Q fever in July 2014. Clinicians should be aware of health risks, such as Q fever and other zoonotic diseases, among patients with a history of receiving treatment with live cell therapy products.

  5. Quasi bound states in the continuum with few unit cells of photonic crystal slab

    DEFF Research Database (Denmark)

    Taghizadeh, Alireza; Chung, Il-Sug

    2017-01-01

    Bound states in the continuum (BICs) in photonic crystal slabs represent the resonances with an infinite quality (Q)-factor, occurring above the light line for an infinitely periodic structure. We show that a set of BICs can turn into quasi-BICs with a very high Q-factor even for two or three unit...

  6. Radiation reaction in various dimensions

    CERN Document Server

    Galtsov, D V

    2002-01-01

    We discuss the radiation reaction problem for an electric charge moving in flat space-time of arbitrary dimensions. It is shown that four is the unique dimension where a local differential equation exists accounting for the radiation reaction and admitting a consistent mass-renormalization (the Dirac-Lorentz equation). In odd dimensions the Huygens principle does not hold; as a result, the radiation reaction force depends on the whole past history of a charge (radiative tail). We show that the divergence in the tail integral can be removed by the mass renormalization only in the 2+1 theory. In even dimensions higher than four, divergences can not be removed by a renormalization.

  7. Dimensions of Intercultural Communication Competence

    Institute of Scientific and Technical Information of China (English)

    郭飞燕

    2016-01-01

    Intercultural communication competence can help us adapt better to the host culture and deal with culture shock suc-cessfully. This paper mainly discusses the dimensions of intercultural communication competence.

  8. Radiation reaction in various dimensions

    Science.gov (United States)

    Gal'Tsov, Dmitri V.

    2002-07-01

    We discuss the radiation reaction problem for an electric charge moving in flat space-time of arbitrary dimensions. It is shown that four is the unique dimension where a local differential equation exists accounting for the radiation reaction and admitting a consistent mass renormalization (the Lorentz-Dirac equation). In odd dimensions Huygens's principle does not hold, and, as a result, the radiation reaction force depends on the whole past history of a charge (radiative tail). We show that the divergence in the tail integral can be removed by the mass renormalization only in the 2+1 theory. In even dimensions higher than four, divergences cannot be removed by the mass renormalization.

  9. The social dimension of entrepreneurship

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    2005-01-01

    This paper proposes an integrative framework to conceptualize important social dimensions of entrepreneurship. The paper reviews and evaluates the current status of research dealing with entrepreneurship, social capital and trust. The proposed framework rests on the recognition that entrepreneurial...

  10. Inflation from periodic extra dimensions

    CERN Document Server

    Higaki, Tetsutaro

    2016-01-01

    We discuss a realization of a small field inflation based on string inspired supergravities. In theories accompanying extra dimensions, compactification of them with small radii is required for realistic situations. Since the extra dimension can have a periodicity, there will appear (quasi-)periodic functions under transformations of moduli of the extra dimensions in low energy scales. Such a periodic property can lead to a UV completion of so-called multi-natural inflation model where inflaton potential consists of a sum of multiple sinusoidal functions with a decay constant smaller than the Planck scale. As an illustration, we construct a SUSY breaking model, and then show that such an inflaton potential can be generated by a sum of world sheet instantons in intersecting brane models on extra dimensions containing $T^2/{\\mathbb Z}_2$ orbifold. We show also predictions of cosmic observables by numerical analyzes.

  11. Keynote speech: Dimensions of Change

    DEFF Research Database (Denmark)

    Jørgensen, Kenneth Mølbjerg

    2004-01-01

    The presentation seeks to construct a framework for understanding knowledge and knowledge work. I argue that knowledge may be understood as a social construction of reality. I argue that people construct their reality by integrating four dimensions of reality: Facts, logic, values and communication...... introduce a basic framework for understanding knowledge. This is done by means of Wittgenstein's concept of language games. Second, I introduce the four dimensions of reality. Third I relate the model to the disciplines organizational learning and knowledge management...

  12. Phenomenology of universal extra dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Kong, Kyoungchul; Matchev, Konstantin T.; /Florida U.

    2006-10-01

    In this proceeding, the phenomenology of Universal Extra Dimensions (UED), in which all the Standard Model fields propagate, is explored. We focus on models with one universal extra dimension, compactified on an S{sub 1}/Z{sub 2} orbifold. We revisit calculations of Kaluza-Klein (KK) dark matter without an assumption of the KK mass degeneracy including all possible coannihilations. We then contrast the experimental signatures of low energy supersymmetry and UED.

  13. Timbre Dimensions for Musical Control

    Science.gov (United States)

    Giese, Gregory Roy

    This dissertation addresses the folowing question: Given the technologies to develop and implement any kind of sound generating and controlling device, what will the instrument designer, the composer, and the performer need to know in order to more fully utilize the dimensions of timbre in music and musical performance? This question is approached from the standpoint of music theory. Definitions of timbre and a few examples of related physical and perceptual research are reviewed. Included is a discussion of the essential elements of musical control and of intelligent organization of sound in music. This discussion raises more questions than can be answered simply. It is an attempt to unravel the nature of sound clues and sound qualities as they convey sound identities and musical gesture. A theoretical simplification of sound dimensions for musical use is proposed. Sounds which can be sustained indefinitely consist of steady-state acoustical dimensions. These dimensions rely upon the perceptual phenomenon of simultaneous fusion (synance). Sounds which can not be sustained indefinitely consist of transitions. Transitions may cause successive fusion (sonance). The discussion of steady-state and transition dimensions includes a review of a few informal experiments. This work reveals problems that will influence the musical use of timbre dimensions. It also leads to a theory for the organization and control of timbre dimensions in music. Among the timbre dimensions discussed are: spectral envelope, harmonic content, brightness, phase, inharmonicity, aperiodicity, and temporal transitions. Questions are raised regarding the perception of harmonic content. The effect of register on perception of tones consisting of from two to nine partials is explored and discussed. The size of interval between partials determines a unique quality. This is most apparent with tones consisting of only two or three partials (dions or trions).

  14. Development of a unit suitable for corrosion monitoring in district heating systems. Experiences with the LOCOR-cell test method

    DEFF Research Database (Denmark)

    Andersen, Asbjørn; Hilbert, Lisbeth Rischel

    2004-01-01

    the purpose, background and gained results of one of the used monitoring techniques, the crevice corrosion measurements obtained by the LOCOR-Cell„§. The crevice corrosion cell was developed by FORCE Technology in a previous district heating project financed by Nordic Industrial Fund (1)(2). Results from...... in 6 pressurised circulating heating systems and in one cooling system. 7 different corrosion monitoring methods have been used to study corrosion rates and types in dependency of water chemistry. This paper describes the design of the by-pass unit including water analysis methods. It also describes...... other used corrosion monitoring methods in the project are described elsewhere (3) and (4). For future district heating corrosion monitoring the by-pass unit can be recommended for permanent installation and the two methods high sensitive ER-technique (Metricorr) and the LOCOR-Cell„§ (FORCE Technology...

  15. Development of a unit suitable for corrosion monitoring in district heating systems. Experiences with the LOCOR-cell test method

    DEFF Research Database (Denmark)

    Andersen, Asbjørn; Hilbert, Lisbeth Rischel

    2004-01-01

    the purpose, background and gained results of one of the used monitoring techniques, the crevice corrosion measurements obtained by the LOCOR-Cell„§. The crevice corrosion cell was developed by FORCE Technology in a previous district heating project financed by Nordic Industrial Fund (1)(2). Results from...... in 6 pressurised circulating heating systems and in one cooling system. 7 different corrosion monitoring methods have been used to study corrosion rates and types in dependency of water chemistry. This paper describes the design of the by-pass unit including water analysis methods. It also describes...... other used corrosion monitoring methods in the project are described elsewhere (3) and (4). For future district heating corrosion monitoring the by-pass unit can be recommended for permanent installation and the two methods high sensitive ER-technique (Metricorr) and the LOCOR-Cell„§ (FORCE Technology...

  16. Heterodimeric barnase-barstar vaccine molecules: influence of one versus two targeting units specific for antigen presenting cells.

    Directory of Open Access Journals (Sweden)

    Heidi Cecilie Larsen Spång

    Full Text Available It is known that targeting of antigen to antigen presenting cells (APC increases immune responses. However, it is unclear if more than one APC-specific targeting unit in the antigenic molecule will increase responses. To address this issue, we have here made heterodimeric vaccine molecules that each express four different fusion subunits. The bacterial ribonuclease barnase and its inhibitor barstar interact with high affinity, and the barnase-barstar complex was therefore used as a dimerization unit. Barnase and barstar were fused N-terminally with single chain fragment variable (scFvs targeting units specific for either MHC class II molecules on APC or the hapten 5-iodo-4-hydroxy-3-nitrophenylacetyl (NIP. C-terminal antigenic fusions were either the fluorescent protein mCherry or scFv(315 derived from myeloma protein M315. The heterodimeric vaccine molecules were formed both in vitro and in vivo. Moreover, the four different fused moieties appeared to fold correctly since they retained their specificity and function. DNA vaccination with MHC class II-targeted vaccine induced higher mCherry-specific IgG1 responses compared to non-targeted control. Since mCherry and MHC class II are in trans in this heterodimer, this suggests that heterodimeric proteins are formed in vivo without prior protein purification. Surprisingly, one targeting moiety was sufficient for the increased IgG1 response, and addition of a second targeting moiety did not increase responses. Similar results were found in in vitro T cell assays; vaccine molecules with one targeting unit were as potent as those with two. In combination with the easy cloning strategy, the heterodimeric barnase-barstar vaccine molecule could provide a flexible platform for development of novel DNA vaccines with increased potency.

  17. Inter-relationships between single carbon units' metabolism and resting energy expenditure in weight-losing patients with small cell lung cancer. Effects of methionine supply and chemotherapy

    DEFF Research Database (Denmark)

    Sengeløv, H; Hansen, O P; Simonsen, L;

    1994-01-01

    The one-carbon unit metabolism was investigated in 8 weight-losing patients with small cell carcinoma of the lung (SCLC). At diagnosis, 6 of the 8 patients had elevated formiminoglutamic acid (FIGLU) excretion after a histidine load, suggesting a lack of one-carbon units. In accordance, a signifi...

  18. Quantification of in situ temperature measurements on a PBI-based high temperature PEMFC unit cell

    DEFF Research Database (Denmark)

    Lebæk, Jesper; Ali, Syed Talat; Møller, Per

    2010-01-01

    The temperature is a very important operating parameter for all types of fuel cells. In the present work distributed in situ temperature measurements are presented on a polybenzimidazole based high temperature PEM fuel cell (HT-PEM). A total of 16 T-type thermocouples were embedded on both...... sensors showed minimal influence on cell performance, this difference seen in performance is believed to be caused by different bipolar plate materials. The measurement method is suitable for obtaining detailed data for validation of computational models, moreover the results indicate that the method can...

  19. Logistics and Capability Implications of a Bradley Fighting Vehicle with a Fuel Cell Auxiliary Power Unit

    Science.gov (United States)

    2003-10-13

    Husted, John MacBain Delphi Corporation Heather McKee US Army TACOM Copyright © 2003 SAE International ABSTRACT Modern military ground vehicles are...WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Delphi Corporation,5725 Delphi Drive,Troy,Mi,48098 8. PERFORMING ORGANIZATION... injector hardware change. A single, 28V, 400A permanent-magnet direct current (DC) generator is driven by a power take off (PTO) directly connected to

  20. Evaluation of eicosanoid concentrations in stored units of canine packed red blood cells.

    Science.gov (United States)

    Blake, Rachel R; Lee, Jung Hwa; Ross, Matt K; Archer, Todd M; Wills, Robert W; Mackin, Andrew J; Thomason, John M

    2017-01-15

    OBJECTIVE To evaluate eicosanoid concentrations in freshly prepared canine packed RBCs (PRBCs) and to assess changes in eicosanoid concentrations in PRBC units over time during storage and under transfusion conditions. DESIGN Prospective study. SAMPLE 25 plasma samples from 14 healthy Greyhounds. PROCEDURES Plasma samples were obtained during PRBC preparation (donation samples), and the PRBC units were then stored at 4°C until used for transfusion (≤ 21 days later; n = 17) or mock transfusion if expired (22 to 24 days later; 8). Immediately prior to use, 100 mL of saline (0.9% NaCl) solution was added to each unit and a pretransfusion sample was collected. A posttransfusion sample was collected after transfusion or mock transfusion. Concentrations of arachidonic acid, prostaglandin (PG) F2α, PGE2, PGD2, thromboxane B2, 6-keto-PGF1α, and leukotriene B4 were measured by liquid chromatography-mass spectrometry and analyzed statistically. RESULTS Median arachidonic acid concentration was significantly decreased in posttransfusion samples, compared with the concentration in donation samples. Median PGF2α, 6-keto-PGF1α, and leukotriene B4 concentrations were significantly increased in pretransfusion samples, compared with those in donation samples. Median PGF2α, thromboxane B2, and 6-keto-PGF1α concentrations were significantly increased in posttransfusion samples, compared with those in pretransfusion samples. Duration of PRBC storage had significant associations with pretransfusion and posttransfusion arachidonic acid and thromboxane B2 concentrations. CONCLUSIONS AND CLINICAL RELEVANCE Concentrations of several proinflammatory eicosanoids increased in PRBC units during storage, transfusion, or both. Accumulation of these products could potentially contribute to adverse transfusion reactions, and investigation of the potential association between eicosanoid concentrations in PRBCs and the incidence of transfusion reactions in dogs is warranted.

  1. Trapped-Mode Resonance Regime of Thin Microwave Electromagnetic Arrays with Two Concentric Rings in Unit Cell

    Directory of Open Access Journals (Sweden)

    M. N. Kawakatsu

    2011-01-01

    Full Text Available We present a theoretical study of reflection and transmission characteristics of a microwave planar array on a thin dielectric substrate with unit cell made of two concentric rings. This array possesses high quality factor transmission resonance with polarization insensitivity for normally incident plane wave. This resonance is defined by the trapped-mode regime. We show that for oblique incidence, there are some differences in characteristics of the array and a small change in quality factor of the trapped-mode resonance.

  2. Comparison of fuel-cell and diesel integrated energy systems and a conventional system for a 500-unit apartment

    Science.gov (United States)

    Simons, S. N.; Maag, W. L.

    1978-01-01

    The electrical and thermal energy utilization efficiencies of a 500 unit apartment complex are analyzed and compared for each of three energy supply systems. Two on-site integrated energy systems, one powered by diesel engines and the other by phosphoric-acid fuel cells were compared with a conventional system which uses purchased electricity and on-site boilers for heating. All fuels consumed on-site are clean, synthetic fuels (distillate fuel oil or pipeline quality gas) derived from coal. Purchased electricity was generated from coal at a central station utility. The relative energy consumption and economics of the three systems are analyzed and compared.

  3. Oil and Gas Exploration and Production in the United States Shown as Quarter-Mile Cells

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A cells polygon feature class was created by the U.S. Geological Survey (USGS) to illustrate the degree of exploration, type of production, and distribution of...

  4. On transfinite extension of asymptotic dimension

    OpenAIRE

    Radul, Taras

    2006-01-01

    We prove that a transfinite extension of asymptotic dimension asind is trivial. We introduce a transfinite extension of asymptotic dimension asdim and give an example of metric proper space which has transfinite infinite dimension.

  5. Extra dimensions in space and time

    CERN Document Server

    Bars, Itzhak

    2010-01-01

    Covers topics such as Einstein and the Fourth Dimension; Waves in a Fifth Dimension; and String Theory and Branes Experimental Tests of Extra Dimensions. This book offers a discussion on Two-Time Physics

  6. On Gorenstein projective, injective and flat dimensions

    DEFF Research Database (Denmark)

    Christensen, Lars Winther; Frankild, Anders Juel; Holm, Henrik Granau

    2006-01-01

    Gorenstein homological dimensions are refinements of the classical homological dimensions, and finiteness singles out modules with amenable properties reflecting those of modules over Gorenstein rings. As opposed to their classical counterparts, these dimensions do not immediately come with pract...

  7. On Gorenstein projective, injective and flat dimensions

    DEFF Research Database (Denmark)

    Christensen, Lars Winther; Frankild, Anders Juel; Holm, Henrik Granau

    2006-01-01

    Gorenstein homological dimensions are refinements of the classical homological dimensions, and finiteness singles out modules with amenable properties reflecting those of modules over Gorenstein rings. As opposed to their classical counterparts, these dimensions do not immediately come with pract...

  8. On the Estimation of Pointwise Dimension

    CERN Document Server

    Hidaka, Shohei

    2013-01-01

    Our goal in this paper is to develop an effective estimator of fractal dimension. We survey existing ideas in dimension estimation, with a focus on the currently popular method of Grassberger and Procaccia for the estimation of correlation dimension. There are two major difficulties in estimation based on this method. The first is the insensitivity of correlation dimension itself to differences in dimensionality over data, which we term {\\em dimension blindness}. The second comes from the reliance of the method on the inference of limiting behavior from finite data. We propose pointwise dimension as an object for estimation in response to the dimension blindness of correlation dimension. Pointwise dimension is a local quantity, and the distribution of pointwise dimensions over the data contains the information to which correlation dimension is blind. We use a "limit-free" description of pointwise dimension to develop a new estimator. We conclude by discussing potential applications of our estimator as well as...

  9. Fuel cell programs in the United States for stationary power applications

    Energy Technology Data Exchange (ETDEWEB)

    Singer, M.

    1996-04-01

    The Department of Energy (DOE), Office of Fossil Energy, is participating with the private sector in sponsoring the development of molten carbonate fuel cell (MCFC) and solid oxide fuel cell (SOFC) technologies for application in the utility, commercial and industrial sectors. Phosphoric acid fuel cell (PAFC) development was sponsored by the Office of Fossil Energy in previous years and is now being commercialized by the private sector. Private sector participants with the Department of Energy include the Electric Power Research Institute (EPRI), the Gas Research institute (GRI), electric and gas utilities, universities, manufacturing companies and their suppliers. through continued government and private sector support, fuel cell systems are emerging power generation technologies which are expected to have significant worldwide impacts. An industry with annual sales of over a billion dollars is envisioned early in the 21st century. PAFC power plants have begun to enter the marketplace and MCFC and SOFC power plants are expected to be ready to enter the marketplace in the late 1990s. In support of the efficient and effective use of our natural resources, the fuel cell program seeks to increase energy efficiency and economic effectiveness of power generation. This is to be accomplished through effectiveness of power generation. This is accomplished through the development and commercialization of cost-effective, efficient and environmentally desirable fuel cell systems which will operate on fossil fuels in multiple and end use sectors.

  10. Temperature-dependent haemolytic propensity of CPDA-1 stored red blood cells vs whole blood - Red cell fragility as donor signature on blood units.

    Science.gov (United States)

    Tzounakas, Vassilis L; Anastasiadi, Alkmini T; Karadimas, Dimitrios G; Zeqo, Redisa A; Georgatzakou, Hara T; Pappa, Olga D; Papatzitze, Olga A; Stamoulis, Konstantinos E; Papassideri, Issidora S; Antonelou, Marianna H; Kriebardis, Anastasios G

    2017-09-01

    To preserve cellular integrity and avoid bacterial growth, storage and transfer of blood and blood products follow strict guidelines in terms of temperature control. We evaluated the impact of ineligible warming of whole blood donations on the quality of blood components. One-hundred and twenty units of whole blood (WB) from eligible blood donors were collected in CPDA-1 and stored at 4±2 °C. During shipment to the blood processing centre, a gradual warming up to 17 °C was recorded within a period of less than eight hours. The warmed units were processed to packed red blood cells (PRBCs) or stored as WB units at 4±2 °C. In-bag haemolysis, osmotic fragility (mean corpuscular fragility, MCF) and bacterial growth were assessed in blood and blood components throughout the storage period. Normal basal and early storage levels of haemolysis were recorded in both PRBC and WB units. Thereafter, PRBCs exhibited higher average in-bag haemolysis and MCF index compared to the WB units throughout the storage. Moreover, 14.3 and 52.4% of the PRBC units exceeded the upper permissible limit of 0.8% haemolysis at the middle (1.220±0.269%) or late (1.754±0.866%) storage period, respectively. MCF index was similar in all PRBCs at the middle of storage but significantly lower in the non-haemolysed compared to the haemolysed units of PRBCs on the last days. The fragility of stored RBCs was proportional to the donor-related values of day 2 samples (r=0.861, punits of PRBCs. Transient, gradient warming of whole blood from 4 to 17 °C led to increased incidence of in-bag haemolysis in PRBC but not in WB units. Haemolysis is a multi-parametric phenotype of stored blood, and MCF is a donor-related and highly dynamic measure that can, in part, predict the storage lesion.

  11. Engineering aspects and hardware verification of a volume producable solid oxide fuel cell stack design for diesel auxiliary power units

    Science.gov (United States)

    Stelter, Michael; Reinert, Andreas; Mai, Björn Erik; Kuznecov, Mihail

    A solid oxide fuel cell (SOFC) stack module is presented that is designed for operation on diesel reformate in an auxiliary power unit (APU). The stack was designed using a top-down approach, based on a specification of an APU system that is installed on board of vehicles. The stack design is planar, modular and scalable with stamped sheet metal interconnectors. It features thin membrane electrode assemblies (MEAs), such as electrolyte supported cells (ESC) and operates at elevated temperatures around 800 °C. The stack has a low pressure drop in both the anode and the cathode to facilitate a simple system layout. An overview of the technical targets met so far is given. A stack power density of 0.2 kW l -1 has been demonstrated in a fully integrated, thermally self-sustaining APU prototype running with diesel and without an external water supply.

  12. Dimensions of attractors in pinched skew products

    OpenAIRE

    Gröger, M.; Jäger, T.

    2011-01-01

    We study dimensions of strange non-chaotic attractors and their associated physical measures in so-called pinched skew products, introduced by Grebogi and his coworkers in 1984. Our main results are that the Hausdorff dimension, the pointwise dimension and the information dimension are all equal to one, although the box-counting dimension is known to be two. The assertion concerning the pointwise dimension is deduced from the stronger result that the physical measure is rectifiable. Our findi...

  13. Scaling dimensions of monopole operators in the $\\mathbb{CP}^{N_b - 1}$ theory in $2+1$ dimensions

    CERN Document Server

    Dyer, Ethan; Pufu, Silviu S; Sachdev, Subir

    2015-01-01

    We study monopole operators at the conformal critical point of the $\\mathbb{CP}^{N_b - 1}$ theory in $2+1$ spacetime dimensions. Using the state-operator correspondence and a saddle point approximation, we compute the scaling dimensions of the operators that insert one or two units of magnetic flux to next-to-leading order in $1/N_b$. We compare our results to numerical studies of quantum antiferromagnets on two-dimensional lattices with SU($N_b$) global symmetry, using the mapping of the monopole operators to valence bond solid order parameters of the lattice antiferromagnet. For the monopole operators that insert three or more units of magnetic flux, we find that the rotationally-symmetric saddle point is unstable; in order to obtain the scaling dimensions of these operators, even at leading order in $1/N_b$, one should consider non-spherically-symmetric saddles.

  14. Characterization of immune cells and cytokine localization in the rat utero-placental unit mid- to late gestation.

    Science.gov (United States)

    Tessier, Daniel R; Raha, Sandeep; Holloway, Alison C; Yockell-Lelièvre, Julien; Tayade, Chandrakant; Gruslin, Andrée

    2015-08-01

    The success of pregnancy is dependent on the precise regulation of the immune response within the utero-placental environment. Rats are beginning to be widely used as a model for human immune-related pregnancy complications. However, our knowledge of immune cells and cytokine localization in the rat utero-placental tissue is limited. The current study aimed to localize the immune cell populations, including uterine natural killer (uNK) cells, neutrophils, and macrophages within the rat utero-placental unit at two crucial gestational ages, gestational days 15.5 and 18.5. In addition, we characterized the distribution of the cytokines TNFα, IFNγ, and IL-10 in the utero-placental regions at both the above-mentioned gestational ages. Our study has demonstrated co-localization TNFα and IFNγ with uNK cells in perivascular regions of the rat mesometrial triangle at both gestational ages. Neutrophils and IL-10-positive cells were localized at the maternal-fetal interface and in the spiral artery lumen of the rat mesometrial triangle at both gestational ages. TNFα and IL-10 demonstrated a temporal change in the localization from GD15.5 to GD18.5, which coincides with the leading edge of trophoblast invasion into the mesometrial triangle. The current study furthers our knowledge of the localization of uterine immune cells and relevant cytokines, and provides a base from which to research the function of these immune cells and cytokines during rat pregnancy as a model to study human immune-related pregnancy complications.

  15. Higuchi dimension of digital images.

    Directory of Open Access Journals (Sweden)

    Helmut Ahammer

    Full Text Available There exist several methods for calculating the fractal dimension of objects represented as 2D digital images. For example, Box counting, Minkowski dilation or Fourier analysis can be employed. However, there appear to be some limitations. It is not possible to calculate only the fractal dimension of an irregular region of interest in an image or to perform the calculations in a particular direction along a line on an arbitrary angle through the image. The calculations must be made for the whole image. In this paper, a new method to overcome these limitations is proposed. 2D images are appropriately prepared in order to apply 1D signal analyses, originally developed to investigate nonlinear time series. The Higuchi dimension of these 1D signals is calculated using Higuchi's algorithm, and it is shown that both regions of interests and directional dependencies can be evaluated independently of the whole picture. A thorough validation of the proposed technique and a comparison of the new method to the Fourier dimension, a common two dimensional method for digital images, are given. The main result is that Higuchi's algorithm allows a direction dependent as well as direction independent analysis. Actual values for the fractal dimensions are reliable and an effective treatment of regions of interests is possible. Moreover, the proposed method is not restricted to Higuchi's algorithm, as any 1D method of analysis, can be applied.

  16. Global reorganisation of cis-regulatory units upon lineage commitment of human embryonic stem cells.

    Science.gov (United States)

    Freire-Pritchett, Paula; Schoenfelder, Stefan; Várnai, Csilla; Wingett, Steven W; Cairns, Jonathan; Collier, Amanda J; García-Vílchez, Raquel; Furlan-Magaril, Mayra; Osborne, Cameron S; Fraser, Peter; Rugg-Gunn, Peter J; Spivakov, Mikhail

    2017-03-23

    Long-range cis-regulatory elements such as enhancers coordinate cell-specific transcriptional programmes by engaging in DNA looping interactions with target promoters. Deciphering the interplay between the promoter connectivity and activity of cis-regulatory elements during lineage commitment is crucial for understanding developmental transcriptional control. Here, we use Promoter Capture Hi-C to generate a high-resolution atlas of chromosomal interactions involving ~22,000 gene promoters in human pluripotent and lineage-committed cells, identifying putative target genes for known and predicted enhancer elements. We reveal extensive dynamics of cis-regulatory contacts upon lineage commitment, including the acquisition and loss of promoter interactions. This spatial rewiring occurs preferentially with predicted changes in the activity of cis-regulatory elements and is associated with changes in target gene expression. Our results provide a global and integrated view of promoter interactome dynamics during lineage commitment of human pluripotent cells.

  17. A Micromechanical Unit Cell Model of 2 × 2 Twill Woven Fabric Textile Composite for Multi Scale Analysis

    Science.gov (United States)

    Dixit, A.; Mali, H. S.; Misra, R. K.

    2014-04-01

    Woven fabric based composite materials are being considered for potential structural applications in automotive and aircraft industries due to their better out of plane strength, stiffness and toughness properties than ordinary composite laminates. This paper presents the micromechanical unit cell model of 2 × 2 twill woven fabric textile composite for the estimation of in-plane elastic properties. Modelling of unit cell and its analysis for this new model is developed by using open source coded tool TexGen and finite element software, ABAQUS® respectively. The predicted values are in good agreement with the experimental results reported in literature. To ascertain the effectiveness of the developed model parametric studies have also been conducted on the predicted elastic properties in order to investigate the effects of various geometric parameters such as yarn spacing, fabric thickness, yarn width and fibre volume fraction. The scope of altering weave pattern and yarn characteristics is facilitated in this developed model. Further this model can be implemented for the multi-scale micro/macro-mechanical analysis for the calculation of strength and stiffness of laminates structure made of 2 × 2 twill composite.

  18. Anisotropic bond percolation in two dimensions

    Science.gov (United States)

    Arovas, D.; Bhatt, R. N.; Shapiro, B.

    1983-08-01

    A new single-parameter renormalization-group equation is formulated for anisotropic bond percolation in two dimensions using a position-space renormalization approach. The new equation yields the exact critical line px+py=1 within both the Migdal-Kadanoff decimation and cell renormalization schemes. For large anisotropy, however, an additional critical line appears leading to a spurious divergence in the correlation-length critical exponent. An alternative scheme, which does not preserve the exact critical surface, but yields a correlation-length exponent relatively independent of anisotropy, is also examined.

  19. A review of high-temperature polymer electrolyte membrane fuel-cell (HT-PEMFC)-based auxiliary power units for diesel-powered road vehicles

    Science.gov (United States)

    Liu, Yongfeng; Lehnert, Werner; Janßen, Holger; Samsun, Remzi Can; Stolten, Detlef

    2016-04-01

    This paper presents an extensive review of research on the development of auxiliary power units with enhanced reformate tolerance for high temperature polymer electrolyte membrane fuel cells (HT-PEMFCs). Developments in diesel reforming for fuel cells as auxiliary power units (APUs), single fuel cells and stacks and systems are outlined in detail and key findings are presented. Summaries of HT-PEMFC APU applications and start-up times for HT-PEMFC systems are then given. A summary of cooling HT-PEMFC stacks using a classic schematic diagram of a 24-cell HT-PEMFC stack, with a cooling plate for every third cell, is also presented as part of a stack analysis. Finally, a summary of CO tolerances for fuel cells is given, along with the effects of different CO volume fractions on polarization curves, the fraction of CO coverage, hydrogen coverage, anode overpotential and cell potential.

  20. Personality dimensions of opiate addicts.

    Science.gov (United States)

    Vukov, M; Baba-Milkic, N; Lecic, D; Mijalkovic, S; Marinkovic, J

    1995-02-01

    A survey of 80 opiate addicts included in a detoxification program was conducted at the Institute on Addictions in Belgrade. In addition to a dependence diagnosis and mental disorders based on DSM-III-R, we applied a Tridimensional Personality Questionnaire (TPQ) that measures the 3 major personality dimensions: novelty-seeking (NS), harm avoidance (HA) and reward dependence (RD). When compared with a control group (a sample of Yugoslav undergraduate students), the opiate addicts demonstrate significantly high NS dimension as well as significant divergences of HA and RD subscales. The surveyed opiate addicts demonstrate a high percentage of personality disorders specifically in cluster B. The personality dimensions of opiate addicts showed certain temperament traits, such as: impulsiveness, shyness with strangers, fear of uncertainty and dependence. NS, HA and RD determined by temperament specifics may be an etiological factor in forming of a personality disorder, an affective disorder as well as of a drug choice.

  1. The Geographical Dimension of Terrorism

    Science.gov (United States)

    Hawkins, Houston T.

    The events of September 11 ushered us all into a world in which our security and sense of invulnerability were savagely replaced by vulnerability and irrational fear. To the delight of our adversaries who planned these attacks, we often responded in ways that furthered their agenda by weakening the cultural colossus that we call home. Normally terrorism is viewed as intense but localized violence. Seldom is terrorism viewed in its more expansive dimensions. It is burned into our collective memories as a collapsed building, a shattered bus, an incinerated nightclub, or facilities closed by a few anthrax-laced letters. However, terrorism must be studied in dimensions larger than the view from a news camera. This conclusion forms the intellectual basis for The Geographical Dimension of Terrorism.

  2. Reduced-Dimension Multiuser Detection

    CERN Document Server

    Xie, Yao; Goldsmith, Andrea

    2011-01-01

    We explore several reduced-dimension multiuser detection (RD-MUD) structures that significantly decrease the number of required correlation branches at the receiver front-end, while still achieving performance similar to that of the conventional matched-filter (MF) bank. RD-MUD exploits the fact that the number of active users is typically small relative to the total number of users in the system and relies on ideas of analog compressed sensing to reduce the number of correlators. We first develop a general framework for both linear and nonlinear RD-MUD detectors. We then present theoretical performance analysis for two specific detectors: the linear reduced-dimension decorrelating (RDD) detector, which combines subspace projection and thresholding to determine active users and sign detection for data recovery, and the nonlinear reduced-dimension decision-feedback (RDDF) detector, which combines decision-feedback orthogonal matching pursuit for active user detection and sign detection for data recovery. The t...

  3. Correlated Electrons in Reduced Dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Bonesteel, Nicholas E [Florida State Univ., Tallahassee, FL (United States)

    2015-01-31

    This report summarizes the work accomplished under the support of US DOE grant # DE-FG02-97ER45639, "Correlated Electrons in Reduced Dimensions." The underlying hypothesis of the research supported by this grant has been that studying the unique behavior of correlated electrons in reduced dimensions can lead to new ways of understanding how matter can order and how it can potentially be used. The systems under study have included i) fractional quantum Hall matter, which is realized when electrons are confined to two-dimensions and placed in a strong magnetic field at low temperature, ii) one-dimensional chains of spins and exotic quasiparticle excitations of topologically ordered matter, and iii) electrons confined in effectively ``zero-dimensional" semiconductor quantum dots.

  4. The Creative Dimension of Visuality

    DEFF Research Database (Denmark)

    Michelsen, Anders Ib

    2013-01-01

    analysis relying on language/linguistics as a model for explaining culture? More specifically, how can the – creative – novelty of visual culture be addressed by a notion of discourse? This essay will argue that the debate on visual culture is lacking with regard to discerning the creative dimension of its...... own appearance. It will indicate an alternative conceptual framework based on Johann P. Arnason’s draft of tripartite culturalization which focuses on a shift from essences to dimensions of culture. This will be further developed by relating Maurice Merleau-Ponty’s idea of ‘chiasm’ of ‘the visible...... and the invisible’ to the notion of collective creativity and ‘the imaginary institution of society’ of Cornelius Castoriadis. In the theoretical relationship between Merleau-Ponty and Castoriadis it is possible to indicate a notion of visuality as a creative dimension....

  5. Collider searches for extra dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Landsberg, Greg; /Brown U.

    2004-12-01

    Searches for extra spatial dimensions remain among the most popular new directions in our quest for physics beyond the Standard Model. High-energy collider experiments of the current decade should be able to find an ultimate answer to the question of their existence in a variety of models. Until the start of the LHC in a few years, the Tevatron will remain the key player in this quest. In this paper, we review the most recent results from the Tevatron on searches for large, TeV{sup -1}-size, and Randall-Sundrum extra spatial dimensions, which have reached a new level of sensitivity and currently probe the parameter space beyond the existing constraints. While no evidence for the existence of extra dimensions has been found so far, an exciting discovery might be just steps away.

  6. HE PROFITABILITY OF DIMENSION STONE DEPOSIT EXPLOITATION IN RELATION TO THE COEFFICIENT OF UTILIZATION

    Directory of Open Access Journals (Sweden)

    Dragan Vidić

    2012-12-01

    Full Text Available Dimension stone is a highly valuable mineral raw material per unit of product. From the past experiences and literature it is known that for a certain quantity of commercial blocks, dimension stone should be dug (cut out is significantly larger volume of natural (raw rock mass. Stone residue, resulting in gaining the commercial dimension stone blocks, is usually less value per unit of product. Profitability of the dimension stone exploitation in a deposit is directly dependent on the rock coefficient of utilization. It is therefore a priority task and a challenge to improve the efficiency of dimension stone deposits utilization and reduce the accumulation of mineral residue that would ultimately increase profits. Dependence of profitability on coefficient of utilization of dimension stone deposits can be best expressed by numerical models, as shown in this paper.

  7. Physics with large extra dimensions

    Indian Academy of Sciences (India)

    Ignatios Antoniadis

    2004-02-01

    The recent understanding of string theory opens the possibility that the string scale can be as low as a few TeV. The apparent weakness of gravitational interactions can then be accounted by the existence of large internal dimensions, in the sub-millimeter region. Furthermore, our world must be confined to live on a brane transverse to these large dimensions, with which it interacts only gravitationally. In my lecture, I describe briefly this scenario which gives a new theoretical framework for solving the gauge hierarchy problem and the unification of all interactions. I also discuss a minimal embedding of the standard model, gauge coupling unification and proton stability.

  8. The Ethical Dimension of Innovation

    DEFF Research Database (Denmark)

    Nogueira, Leticia Antunes; Nogueira, Tadeu Fernando

    2014-01-01

    The view of innovation as a positive concept has been deeply rooted in business and academic cultures ever since Schumpeter coined the concept of creative destruction. Even though there is a large body of literature on innovation studies, limited attention has been given to its ethical dimension....... In this chapter, the ethical implications of innovations are illustrated with a case study of “destructive creation” in the food industry, and upon which an argumentative analysis is conducted. The main message of this chapter is that innovations have inherent ethical dimensions and that quality innovations...

  9. Chiral gravity in higher dimensions

    CERN Document Server

    Ootsuka, T; Ura, K; Ootsuka, Takayoshi; Tanaka, Erico; Ura, Kousuke

    2003-01-01

    We construct a chiral theory of gravity in 7 and 8 dimensions, which are equivalent to Einstein-Cartan theory using less variables. In these dimensions, we can construct such higher dimensional chiral gravity because of the existence of gravitational instanton. The octonionic-valued variables in the theory represent the deviation from the gravitational instanton, and from their non-associativity, prevents the theory to be SO(n) gauge invariant. Still the chiral gravity holds G_2 (7-D), and Spin(7) (8-D) gauge symmetry.

  10. Quantum physics in one dimension

    CERN Document Server

    Giamarchi, Thierry

    2004-01-01

    This book presents in a pedagogical yet complete way correlated systems in one dimension. Recent progress in nanotechnology and material research have made one dimensional systems a crucial part of today's physics. After an introduction to the basic concepts of correlated systems, the book gives a step by step description of the techniques needed to treat one dimension, and discusses the resulting physics. Then specific experimental realizations of one dimensional systems such asspin chains, quantum wires, nanotubes, organic superconductors etc. are examined. Given its progressive and pedagogi

  11. Bounding the Fat Shattering Dimension of a Composition Function Class Built Using a Continuous Logic Connective

    CERN Document Server

    Duan, Hubert Haoyang

    2011-01-01

    We begin this report by describing the Probably Approximately Correct (PAC) model for learning a concept class, consisting of subsets of a domain, and a function class, consisting of functions from the domain to the unit interval. Two combinatorial parameters, the Vapnik-Chervonenkis (VC) dimension and its generalization, the Fat Shattering dimension of scale e, are explained and a few examples of their calculations are given with proofs. We then explain Sauer's Lemma, which involves the VC dimension and is used to prove the equivalence of a concept class being distribution-free PAC learnable and it having finite VC dimension. As the main new result of our research, we explore the construction of a new function class, obtained by forming compositions with a continuous logic connective, a uniformly continuous function from the unit hypercube to the unit interval, from a collection of function classes. Vidyasagar had proved that such a composition function class has finite Fat Shattering dimension of all scales...

  12. Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell

    DEFF Research Database (Denmark)

    Jespersen, Jesper Lebæk; Schaltz, Erik; Kær, Søren Knudsen

    2009-01-01

    Equivalent Circuit (EC) modeling key parameters, such as the membrane resistance, charge transfer resistance and gas transfer resistance are identified, however the physical interpretation of the parameters derived from EC's are doubtful as discussed in this paper. The EC model proposed, which is a modified...... Randles circuit, provides a reasonably good fit at all the conditions tested. The measurements reveal that the cell temperature is an important parameter, which influences the cell performance significantly, especially the charge transfer resistance proved to be very temperature dependent. The transport...... of oxygen to the Oxygen Reduction Reaction (ORR) likewise has a substantial effect on the impedance spectra, results showed that the gas transfer resistance has an exponential-like dependency on the air stoichiometry. Based on the present results and results found in recent publications it is still...

  13. Characters of Fractal Ultrastructure in Wood Cell Wall

    Institute of Scientific and Technical Information of China (English)

    LI Beimei; ZHAO Guangjie

    2006-01-01

    Fractal theory was introduced in order to describe the ultrastructure of wood cell wall in this paper.The cellulose chain clusters around nano-scale were viewed as a fractal object that consists of many fibrillar structural units with different scales including microfibrils.On the basis of the morphological data of wood cell wall.fractal dimensions of multi-level fibrillar structural units were calculated by fractal-geometry approach,and then the morphological and structural characteristics of fibers as well as the influences on wood properties were investigated according to the dimensions.Besides,the fractal self-nesting character of the ultrastruture was also analyzed.

  14. Application of multivariate analysis toward biotech processes: case study of a cell-culture unit operation.

    Science.gov (United States)

    Kirdar, Alime Ozlem; Conner, Jeremy S; Baclaski, Jeffrey; Rathore, Anurag S

    2007-01-01

    This paper examines the feasibility of using multivariate data analysis (MVDA) for supporting some of the key activities that are required for successful manufacturing of biopharmaceutical products. These activities include scale-up, process comparability, process characterization, and fault diagnosis. Multivariate data analysis and modeling were performed using representative data from small-scale (2 L) and large-scale (2000 L) batches of a cell-culture process. Several input parameters (pCO2, pO2, glucose, pH, lactate, ammonium ions) and output parameters (purity, viable cell density, viability, osmolality) were evaluated in this analysis. Score plots, loadings plots, and VIP plots were utilized for assessing scale-up and comparability of the cell-culture process. Batch control charts were found to be useful for fault diagnosis during routine manufacturing. Finally, observations made from reviewing VIP plots were found to be in agreement with conclusions from process characterization studies demonstrating the effectiveness of MVDA as a tool for extracting process knowledge.

  15. Space Station Biological Research Project (SSBRP) Cell Culture Unit (CCU) and incubator for International Space Station (ISS) cell culture experiments.

    Science.gov (United States)

    Vandendriesche, Donald; Parrish, Joseph; Kirven-Brooks, Melissa; Fahlen, Thomas; Larenas, Patricia; Havens, Cindy; Nakamura, Gail; Sun, Liping; Krebs, Chris; de Luis, Javier; Vunjak-Novakovic, Gordana; Searby, Nancy D

    2004-03-01

    The CCU and Incubator are habitats under development by SSBRP for gravitational biology research on ISS. They will accommodate multiple specimen types and reside in either Habitat Holding Racks, or the Centrifuge Rotor, which provides selectable gravity levels of up to 2 g. The CCU can support multiple Cell Specimen Chambers, CSCs (18, 9 or 6 CSCs; 3, 10 or 30 mL in volume, respectively). CSCs are temperature controlled from 4-39 degrees C, with heat shock to 45 degrees C. CCU provides automated nutrient supply, magnetic stirring, pH/O2 monitoring, gas supply, specimen lighting, and video microscopy. Sixty sample containers holding up to 2 mL each, stored at 4-39 degrees C, are available for automated cell sampling, subculture, and injection of additives and fixatives. CSCs, sample containers, and fresh/spent media bags are crew-replaceable for long-term experiments. The Incubator provides a 4-45 degrees C controlled environment for life science experiments or storage of experimental reagents. Specimen containers and experiment unique equipment are experimenter-provided. The Specimen Chamber exchanges air with ISS cabin and has 18.8 liters of usable volume that can accommodate six trays and the following instrumentation: five relocatable thermometers, two 60 W power outlets, four analog ports, and one each relative humidity sensor, video port, ethernet port and digital input/output port.

  16. Unexploited Dimensions of Virtual Humans

    NARCIS (Netherlands)

    Ruttkay, Zsófia; Reidsma, Dennis; Nijholt, Anton; Huang, Thomas; Nijholt, Anton; Pantic, Maja; Pentlant, Alex

    2007-01-01

    Virtual Humans are on the border of fiction and realism: while it is obvious that they do not exist in reality and function on different principles than real people, they have been endowed with human features such as being emotionally sensitive. In this article we argue that many dimensions, both hu

  17. Effective dimension in flocking mechanisms

    Science.gov (United States)

    Baglietto, Gabriel; Albano, Ezequiel V.

    2011-03-01

    Even in its minimal representation (Vicsek Model, VM [T. Vicsek, A. Czirok, E. Ben-Jacob, I. Cohen and O. Shochet. Phys. Rev. Lett. 75, 1226 (1995).]), the widespread phenomenon of flocking raises intriguing questions to the statistical physicists. While the VM is very close to the better understood XY Model because they share many symmetry properties, a major difference arises by the fact that the former can sustain long-range order in two dimensions, while the latter can not. Aiming to contribute to the understanding of this feature, by means of extensive numerical simulations of the VM, we study the network structure of clusters showing that they can also sustain purely orientational, mean-field-like, long-range order. We identify the reason of this capability with the key concept of "effective dimension." In fact, by analyzing the behavior of the average path length and the mean degree, we show that this dimension is very close to four, which coincides with the upper critical dimension of the XY Model, where orientational order is also of a mean-field nature. We expect that this methodology could be generalized to other types of dynamical systems.

  18. Cosmology With Dynamical Extra Dimensions

    CERN Document Server

    Erickson, J K

    2005-01-01

    Nearly every attempt to unify the fundamental forces incorporates the idea of compact extra dimensions. The notion was introduced by Kaluza and Klein in the 1920s and is an essential part of contemporary string theory and M-theory. In most treatments the extra dimensions are static. We consider the consequences of extra dimensions with time-varying radii. The radii are modeled by light scalar fields. These may have unusual properties which produce observable effects, such as non-canonical kinetic energies, couplings to matter and radiation, and non- minimal coupling to gravity. Extra dimensions may be responsible for dark energy in the late universe. The simplest model of dark energy is characterized by its equation of state. We show that constraints placed on realistic models by the universality of free fall, variation of fundamental constants and metric tests of gravity are often stricter than bounds on the equation of state. Testing the equivalence principle maybe an effective way of distinguishing some qu...

  19. Competitive dimensions of human resources

    OpenAIRE

    Neykova Rumyana Mykolaivna; Prokopenko Olha Volodymyrіvna; Shcherbachenko Viktoriia Oleksiivna

    2015-01-01

    This article deals with the essence of human resources competitive dimensions. Their competitive priorities are analyzed in dynamic business environment, with an emphasis on the quality of human resources, their adaptive skills, communication skills and mobility. The attention is paid to the role behavior of personnel and the policies for its management in the context of cutting down management costs.

  20. Manual tracking in three dimensions.

    NARCIS (Netherlands)

    Mrotek, L.A.; Gielen, C.C.A.M.; Flanders, M.

    2006-01-01

    Little is known about the manual tracking of targets that move in three dimensions. In the present study, human subjects followed, with the tip of a hand-held pen, a virtual target moving four times (period 5 s) around a novel, unseen path. Two basic types of target paths were used: a peanut-shaped

  1. Dimensions of problem based learning

    DEFF Research Database (Denmark)

    Nielsen, Jørgen Lerche; Andreasen, Lars Birch

    2013-01-01

    The article contributes to the literature on problem based learning and problem-oriented project work, building on and reflecting the experiences of the authors through decades of work with problem-oriented project pedagogy. The article explores different dimensions of problem based learning...

  2. Quantum Gravity in Two Dimensions

    DEFF Research Database (Denmark)

    Ipsen, Asger Cronberg

    The topic of this thesis is quantum gravity in 1 + 1 dimensions. We will focus on two formalisms, namely Causal Dynamical Triangulations (CDT) and Dy- namical Triangulations (DT). Both theories regularize the gravity path integral as a sum over triangulations. The difference lies in the class...

  3. Competitive dimensions of human resources

    Directory of Open Access Journals (Sweden)

    Neykova Rumyana Mykolaivna

    2015-02-01

    Full Text Available This article deals with the essence of human resources competitive dimensions. Their competitive priorities are analyzed in dynamic business environment, with an emphasis on the quality of human resources, their adaptive skills, communication skills and mobility. The attention is paid to the role behavior of personnel and the policies for its management in the context of cutting down management costs.

  4. Massive Gravity in Three Dimensions

    NARCIS (Netherlands)

    Bergshoeff, Eric A.; Hohm, Olaf; Townsend, Paul K.

    2009-01-01

    A particular higher-derivative extension of the Einstein-Hilbert action in three spacetime dimensions is shown to be equivalent at the linearized level to the (unitary) Pauli-Fierz action for a massive spin-2 field. A more general model, which also includes "topologically-massive" gravity as a speci

  5. Heat conduction in three dimensions

    Science.gov (United States)

    Danza, T. M.; Fesler, L. W.; Mongan, R. D.

    1980-01-01

    Multidimensional heat conduction program computes transient temperature history and steady state temperatures of complex body geometries in three dimensions. Emphasis is placed on type of problems associated with Space Shuttle thermal protection system, but program could be used in thermal analysis of most three dimensional systems.

  6. Emotion dimensions and formant position

    NARCIS (Netherlands)

    Goudbeek, M.B.; Goldman, J.P.; Scherer, K.R.; Uther, M.; Moore, R.; Cox, S.

    2009-01-01

    The influence of emotion on articulatory precision was investigated in a newly established corpus of acted emotional speech. The frequencies of the first and second formant of the vowels /i/, /u/, and /a/ was measured and shown to be significantly affected by emotion dimension. High arousal resulted

  7. Manual tracking in three dimensions.

    NARCIS (Netherlands)

    Mrotek, L.A.; Gielen, C.C.A.M.; Flanders, M.

    2006-01-01

    Little is known about the manual tracking of targets that move in three dimensions. In the present study, human subjects followed, with the tip of a hand-held pen, a virtual target moving four times (period 5 s) around a novel, unseen path. Two basic types of target paths were used: a peanut-shaped

  8. Quantum Gravity in Two Dimensions

    DEFF Research Database (Denmark)

    Ipsen, Asger Cronberg

    The topic of this thesis is quantum gravity in 1 + 1 dimensions. We will focus on two formalisms, namely Causal Dynamical Triangulations (CDT) and Dy- namical Triangulations (DT). Both theories regularize the gravity path integral as a sum over triangulations. The difference lies in the class...

  9. The Visuospatial Dimension of Writing

    Science.gov (United States)

    Olive, Thierry; Passerault, Jean-Michel

    2012-01-01

    The authors suggest that writing should be conceived of not only as a verbal activity but also as a visuospatial activity, in which writers process and construct visuospatial mental representations. After briefly describing research on visuospatial cognition, they look at how cognitive researchers have investigated the visuospatial dimension of…

  10. Strong metric dimension: A survey

    Directory of Open Access Journals (Sweden)

    Kratica Jozef

    2014-01-01

    Full Text Available The strong metric dimension has been a subject of considerable amount of research in recent years. This survey describes the related development by bringing together theoretical results and computational approaches, and places the recent results within their historical and scientific framework. [Projekat Ministarstva nauke Republike Srbije, br. 174010 i br. 174033

  11. Unexploited Dimensions of Virtual Humans

    NARCIS (Netherlands)

    Ruttkay, Z.M.; Reidsma, Dennis; Huang, Thomas; Nijholt, Antinus; Pantic, Maja; Pentlant, Alex

    Virtual Humans are on the border of fiction and realism: while it is obvious that they do not exist in reality and function on different principles than real people, they have been endowed with human features such as being emotionally sensitive. In this article we argue that many dimensions, both

  12. The Feeling Dimension in Reading.

    Science.gov (United States)

    Ediger, Marlow

    The feeling dimension of students cannot be ignored in teaching and learning situations. Feelings are there and must not be ignored. Reading stresses word recognition, comprehension of subject matter at diverse levels of complexity, and application of what has been learned. A major ingredient so frequently left out is student appreciation of the…

  13. Heat conduction in three dimensions

    Science.gov (United States)

    Danza, T. M.; Fesler, L. W.; Mongan, R. D.

    1980-01-01

    Multidimensional heat conduction program computes transient temperature history and steady state temperatures of complex body geometries in three dimensions. Emphasis is placed on type of problems associated with Space Shuttle thermal protection system, but program could be used in thermal analysis of most three dimensional systems.

  14. Soldering and Mass Generation in Four Dimensions

    CERN Document Server

    Banerjee, R; Banerjee, Rabin; Wotzasek, Clovis

    2000-01-01

    We propose bosonised expressions for the chiral Schwinger models in four dimensions. Then, in complete analogy with the two dimensional case, we show the soldering of two bosonised chiral Schwinger models with opposite chiralities to yield the bosonised Schwinger model in four dimensions. The implications of the Schwinger model or its chiral version, as known for two dimensions, thereby get extended to four dimensions.

  15. Cosmology with dynamical extra dimensions

    Science.gov (United States)

    Erickson, Joel K.

    Nearly every attempt to unify the fundamental forces incorporates the idea of compact extra dimensions. The notion was introduced by Kaluza and Klein in the 1920s and is an essential part of contemporary string theory and M-theory. In most treatments the extra dimensions are static. We consider the consequences of extra dimensions with time-varying radii. The radii are modeled by light scalar fields. These may have unusual properties which produce observable effects, such as non-canonical kinetic energies, couplings to matter and radiation, and non-minimal coupling to gravity. Extra dimensions may be responsible for dark energy in the late universe. The simplest model of dark energy is characterized by its equation of state. We show that constraints placed on realistic models by the universality of free fall, variation of fundamental constants and metric tests of gravity are often stricter than bounds on the equation of state. Testing the equivalence principle maybe an effective way of distinguishing some quintessence models from a cosmological constant. In certain dark energy models the speed of sound is much less than the speed of light. We calculate how this affects the cosmic microwave background and show that the speed of sound may be measurable, provided dark energy is sufficiently dense at decoupling. This is another possible signature of quintessence. Dynamical extra dimensions may have consequences for the early universe. In the cyclic model, the universe is described in terms of a series of contractions and expansions of an extra dimension. The big bang is preceded by a big crunch and quantum fluctuations of the scalar field produce structure in universe. We consider how the fluctuations evolve and build over many cycles and show that there are no observable instabilities or adverse effects. In the cyclic model extra dimensions act as both dark energy and as an agent to cause contraction and a big crunch. Previous theorems suggested that contraction

  16. Multiple dimensions of cardiopulmonary dyspnea

    Institute of Scientific and Technical Information of China (English)

    HAN Jiang-na; XIONG Chang-ming; YAO Wei; FANG Qiu-hong; ZHU Yuan-jue; CHENG Xian-sheng; Karel P Van de Woestijne

    2011-01-01

    Background The current theory of dyspnea perception presumes a multidimensional conception of dyspnea.However,its validity in patients with cardiopulmonary dyspnea has not been investigated.Methods A respiratory symptom checklist incorporating spontaneously reported descriptors of sensory experiences of breathing discomfort,affective aspects,and behavioral items was administered to 396 patients with asthma,chronic obstructive pulmonary disease (COPD),diffuse parenchymal lung disease,pulmonary vascular disease,chronic heart failure,and medically unexplained dyspnea.Symptom factors measuring different qualitative components of dyspnea were derived by a principal component analysis.The separation of patient groups was achieved by a variance analysis on symptom factors.Results Seven factors appeared to measure three dimensions of dyspnea:sensory (difficulty breathing and phase of respiration,depth and frequency of breathing,urge to breathe,wheeze),affective (chest tightness,anxiety),and behavioral (refraining from physical activity) dimensions.Difficulty breathing and phase of respiration occurred more often in COPD,followed by asthma (R2=0.12).Urge to breathe was unique for patients with medically unexplained dyspnea (R2=0.12).Wheeze occurred most frequently in asthma,followed by COPD and heart failure (R2=0.17).Chest tightness was specifically linked to medically unexplained dyspnea and asthma (R2=0.04).Anxiety characterized medically unexplained dyspnea (R2=0.08).Refraining from physical activity appeared more often in heart failure,pulmonary vascular disease,and COPD (R2=0.15).Conclusions Three dimensions with seven qualitative components of dyspnea appeared in cardiopulmonary disease and the components under each dimension allowed separation of different patient groups.These findings may serve as a validation on the multiple dimensions of cardiopulmonary dyspnea.

  17. Increasing the repeating units of ethylene glycol-based dimethacrylates directed toward reduced oxidative stress and co-stimulatory factors expression in human monocytic cells.

    Science.gov (United States)

    Tamura, Atsushi; Fukumoto, Izumi; Yui, Nobuhiko; Matsumura, Mitsuaki; Miura, Hiroyuki

    2015-03-01

    The ethylene glycol-based dimethacrylates are commonly used in biomaterials and dental restorative materials as a cross-linking agent. In this study, toxic effect of triethylene glycol dimethacrylate (TEGDMA) and poly(ethylene glycol) dimethacrylates (PEG-DMAs) with various ethylene glycol repeating units was investigated in terms of cytotoxicity, oxidative stress, and the expression of co-stimulatory factors in human leukemia cell line (THP-1 cells) to verify the effect of ethylene glycol repeating units. Note that the 1-octanol/water partition coefficient of PEG-based dimethacrylates decreased with increasing the ethylene glycol repeating units, indicating that the hydrophilicity of PEG-DMAs increased with ethylene glycol repeating units. The toxic effect of PEG-DMAs such as cytotoxicity, oxidative stress, and the expression of CD86 in treated THP-1 cells are reduced with increasing the ethylene glycol repeating units in PEG-DMAs. However, the expression of CD54 in treated THP-1 cells was not influenced with the ethylene glycol repeating units and the maximal expression level of CD54 was observed at the concentration range of 2-4 mM for all samples. Accordingly, hydrophilic character of PEG-DMAs with long ethylene glycol chains definitely alleviates the some toxic aspect of PEG-based DMAs. This finding would provide important insight into the design of new biomaterials and dental materials with superior biocompatibility. © 2014 Wiley Periodicals, Inc.

  18. Synthesis of a new conjugated polymer composed of pyrene and bithiophene units for organic solar cells.

    Science.gov (United States)

    Lee, Sun-Young; Jung, Choong-Hwa; Kang, Jun; Kim, Hee-Joon; Shin, Won Suk; Yoon, Sung Cheol; Moon, Sang-Jin; Lee, Changjin; Hwang, Do-Hoon

    2011-05-01

    An alternating conjugated copolymer composed of pyrene and bithiophene units, poly(DHBT-alt-PYR) has been synthesized. The synthesized polymer was found to exhibit good solution processibility and thermal stability, losing less than 5% of their weight on heating to approximately 370 degrees C. The synthesized polymer showed its maximum absorption and peak PL emission at 401 and 548 nm, respectively. The optical band gap energy of the polymer was determined by absorption onset to be 2.64 eV. Highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of the polymer was determined to be -5.48 and -2.84 eV by cyclic voltametry (CV) and the optical band gap. The polymer photovoltaic devices were fabricated with a typical sandwich structure of ITO/PEDOT:PSS/active layer/LiF/Al using poly(DHBT-alt-PYR) as an electron donor and C60-PCBM or C70-PCBM as electron acceptors. The open circuit voltage, short circuit current and fill factor of the device using C70-PCBM as an acceptor were 0.75 V, 3.80 mA/cm2 and 0.28, respectively, and the maximum power conversion efficiency of the device was 0.80%.

  19. Synthesis and properties of two novel copolymers based on squaraine and fluorene units for solar cell materials

    Institute of Scientific and Technical Information of China (English)

    Zheng Wang; Wei Zhang; Feng Tao; Kai Ge Meng; Long Yi Xi; Ying Li; Qing Jiang

    2011-01-01

    Two novel copolymers based on squaraine and fluorine units have been synthesized through palladium catalyzed Suzuki coupling reaction and Sonogashira coupling reaction, respectively. The structures and properties of the two copolymers were characterized by FT-IR, NMR, UV-vis absorbance (Abs), gel permeation chromatography (GPC), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC) and cyclic voltammetry (CV). The solution absorption spectrums of P1 and P2 show two distinct absorption bands, one locates at 300-500 nm and the other at 600-800 nm. The absorption spectrums of P1 and P2 in films are broadened obviously and the spectral responses are extended up to 900 nm. Thermal gravimetric analysis demonstrates that the polymers are stable. Cyclic voltammetry experiment shows that the band gaps of the copolymers are 1.65 eV and 1.67 eV, respectively, suggesting their potential for applications as solar cells materials.

  20. Laser Molecular Beam Epitaxy Growth of BaTiO3 in Seven Thousands of Unit-Cell Layers

    Institute of Scientific and Technical Information of China (English)

    HUANG Yan-Hong; YANG Guo-Zhen; HE Meng; ZHAO Kun; TIAN Huan-Fang; L(U) Hui-Bin; JIN Kui-Juan; CHEN Zheng-Hao; ZHOU Yue-Liang; LI Jian-Qi

    2005-01-01

    @@ BaTiO3 thin films in seven thousands of unit-cell layers have been successfully fabricated on SrTiO3 (001)substrates by laser molecular beam epitaxy. The fine streak pattern and the undamping intensity oscillation of reflection high-energy electron diffraction indicate that the BaTiO3 film was layer-by-layer epitaxial growth. The measurements of scanning electron microscopy and atomic force microscopy show that surfaces of the BaTiO3thin film are atomically smooth. The measurements of x-ray diffraction and transmission electron microscopy,as well as selected-area electron diffraction revealthat the BaTiO3 thin film is a c-oriented epitaxial crystalline structure.

  1. Efficient particle-in-cell simulation of auroral plasma phenomena using a CUDA enabled graphics processing unit

    Science.gov (United States)

    Sewell, Stephen

    This thesis introduces a software framework that effectively utilizes low-cost commercially available Graphic Processing Units (GPUs) to simulate complex scientific plasma phenomena that are modeled using the Particle-In-Cell (PIC) paradigm. The software framework that was developed conforms to the Compute Unified Device Architecture (CUDA), a standard for general purpose graphic processing that was introduced by NVIDIA Corporation. This framework has been verified for correctness and applied to advance the state of understanding of the electromagnetic aspects of the development of the Aurora Borealis and Aurora Australis. For each phase of the PIC methodology, this research has identified one or more methods to exploit the problem's natural parallelism and effectively map it for execution on the graphic processing unit and its host processor. The sources of overhead that can reduce the effectiveness of parallelization for each of these methods have also been identified. One of the novel aspects of this research was the utilization of particle sorting during the grid interpolation phase. The final representation resulted in simulations that executed about 38 times faster than simulations that were run on a single-core general-purpose processing system. The scalability of this framework to larger problem sizes and future generation systems has also been investigated.

  2. Conceptual design and selection of a biodiesel fuel processor for a vehicle fuel cell auxiliary power unit

    Science.gov (United States)

    Specchia, S.; Tillemans, F. W. A.; van den Oosterkamp, P. F.; Saracco, G.

    Within the European project BIOFEAT (biodiesel fuel processor for a fuel cell auxiliary power unit for a vehicle), a complete modular 10 kW e biodiesel fuel processor capable of feeding a PEMFC will be developed, built and tested to generate electricity for a vehicle auxiliary power unit (APU). Tail pipe emissions reduction, increased use of renewable fuels, increase of hydrogen-fuel economy and efficient supply of present and future APU for road vehicles are the main project goals. Biodiesel is the chosen feedstock because it is a completely natural and thus renewable fuel. Three fuel processing options were taken into account at a conceptual design level and compared for hydrogen production: (i) autothermal reformer (ATR) with high and low temperature shift (HTS/LTS) reactors; (ii) autothermal reformer (ATR) with a single medium temperature shift (MTS) reactor; (iii) thermal cracker (TC) with high and low temperature shift (HTS/LTS) reactors. Based on a number of simulations (with the AspenPlus® software), the best operating conditions were determined (steam-to-carbon and O 2/C ratios, operating temperatures and pressures) for each process alternative. The selection of the preferential fuel processing option was consequently carried out, based on a number of criteria (efficiency, complexity, compactness, safety, controllability, emissions, etc.); the ATR with both HTS and LTS reactors shows the most promising results, with a net electrical efficiency of 29% (LHV).

  3. Successful implementation of a packed red blood cell and fresh frozen plasma transfusion protocol in the surgical intensive care unit.

    Directory of Open Access Journals (Sweden)

    Benjamin E Szpila

    Full Text Available Blood product transfusions are associated with increased morbidity and mortality. The purpose of this study was to determine if implementation of a restrictive protocol for packed red blood cell (PRBC and fresh frozen plasma (FFP transfusion safely reduces blood product utilization and costs in a surgical intensive care unit (SICU.We performed a retrospective, historical control analysis comparing before (PRE and after (POST implementation of a restrictive PRBC/FFP transfusion protocol for SICU patients. Univariate analysis was utilized to compare patient demographics and blood product transfusion totals between the PRE and POST cohorts. Multivariate logistic regression models were developed to determine if implementation of the restrictive transfusion protocol is an independent predictor of adverse outcomes after controlling for age, illness severity, and total blood products received.829 total patients were included in the analysis (PRE, n=372; POST, n=457. Despite higher mean age (56 vs. 52 years, p=0.01 and APACHE II scores (12.5 vs. 11.2, p=0.006, mean units transfused per patient were lower for both packed red blood cells (0.7 vs. 1.2, p=0.03 and fresh frozen plasma (0.3 vs. 1.2, p=0.007 in the POST compared to the PRE cohort, respectively. There was no difference in inpatient mortality between the PRE and POST cohorts (7.5% vs. 9.2%, p=0.39. There was a decreased risk of urinary tract infections (OR 0.47, 95%CI 0.28-0.80 in the POST cohort after controlling for age, illness severity and amount of blood products transfused.Implementation of a restrictive transfusion protocol can effectively reduce blood product utilization in critically ill surgical patients with no increase in morbidity or mortality.

  4. Enhanced Performance of Polymer Solar Cells Comprising Diketopyrrolopyrrole-Based Regular Terpolymer Bearing Two Different π-Extended Donor Units.

    Science.gov (United States)

    Ko, Eun Yi; Park, Gi Eun; Lee, Dae Hee; Um, Hyun Ah; Shin, Jicheol; Cho, Min Ju; Choi, Dong Hoon

    2015-12-30

    New regular and random diketopyrrolopyrrole (DPP)-based terpolymers (i.e., Reg-PBDPPT and Ran-PBDPPT, respectively) bearing DPP as an electron deficient unit and 2,2'-bithiophene and (E)-1,2-di(thiophen-2-yl)ethene as electron donating units were designed and synthesized, and their performance in photovoltaic cells was investigated precisely. The absorption properties and highest occupied molecular orbital (HOMO) of Reg-PBDPPT were found to be different from those of Ran-PBDPPT. The results of grazing incidence X-ray diffraction experiments revealed that Ran-PBDPPT typically had a predominantly edge-on chain orientation on the substrate, whereas Reg-PBDPPT showed mixed chain orientation both in pristine and thermally annealed films. Although Reg-PBDPPT exhibited a lower degree of edge-on chain orientation on the substrate, the corresponding TFTs showed a high hole mobility of 0.42-0.96 cm(2) V(-1) s(-1) and maintained a high current on/off ratio (>10(6)). A polymer solar cell (PSC) composed of Reg-PBDPPT and PC71BM exhibited power conversion efficiencies (PCE) of 5.24-5.45%, which were higher than those of the Ran-PBDPPT-based PSCs. The enhanced efficiency was supported by an increase in the short circuit current, which is strongly related to the unique internal crystalline morphology and pronounced nanophase segregation behavior in the blend films. These results obviously manifested that this synthetic strategy for regular conjugated terpolymers could be employed to control morphological properties to obtain high-performance PSCs.

  5. Novel Organic Sensitizers Containing 2,6-Difunctionalized Anthracene Unit for Dye Sensitized Solar Cells

    Directory of Open Access Journals (Sweden)

    Jiann T. Lin

    2012-08-01

    Full Text Available A series of new organic dyes comprising different amines as electron donors, 2-(6-substituted-anthracen-2-yl-thiophene as the π-conjugated bridge, and cyanoacrylic acid group as an electron acceptor and anchoring group, have been synthesized. There exists charge transfer transition from arylamine and anthracene to the acceptor in these compounds, as evidenced from the photophysical measurements and the computational results. Under one sun (AM 1.5 illumination, dye-sensitized solar cells (DSSCs using these dyes as the sensitizers exhibited efficiencies ranging from 1.62% to 2.88%, surpassing that using 9,10-difunctionalized anthracene-based sensitizer.

  6. INTERDEPENDENCE BETWEEN RELATIONSHIP QUALITY DIMENSIONS

    Directory of Open Access Journals (Sweden)

    Mario Pepur

    2011-02-01

    Full Text Available Tourism-dependent economy, unfavourable structure of accommodation and hotel capacity, seasonality of business and liquidity problems indicate importance of the relationships between hotels and banks in Croatia. Since the capital investments in new and modern capacities are necessity, the quality of their relationship would determine the future of Croatian economy as a whole in the long run. Regarding the capital investments, it is crucially important that cooperation between the employees in both business entities is based on the satisfaction, trust and commitment. In this way, every potential uncertainty as a consequence of the entity’s actions could be minimized. In this paper, 356 tourist objects are hierarchically clustered according to the relationship quality dimensions for the purpose of testing the characteristics according to which the clusters significantly differentiate. Consequently, the interdependence between the observed relationship quality dimensions is examined.

  7. Double Semions in Arbitrary Dimension

    Science.gov (United States)

    Freedman, Michael H.; Hastings, Matthew B.

    2016-10-01

    We present a generalization of the double semion topological quantum field theory to higher dimensions, as a theory of {d-1} dimensional surfaces in a d dimensional ambient space. We construct a local Hamiltonian that is a sum of commuting projectors and analyze the excitations and the ground state degeneracy. Defining a consistent set of local rules requires the sign structure of the ground state wavefunction to depend not just on the number of disconnected surfaces, but also upon their higher Betti numbers through the semicharacteristic. For odd d the theory is related to the toric code by a local unitary transformation, but for even d the dimension of the space of zero energy ground states is in general different from the toric code and for even {d > 2} it is also in general different from that of the twisted {Z_2} Dijkgraaf-Witten model.

  8. Flavor Symmetries in Extra Dimensions

    CERN Document Server

    Aranda, A; Aranda, Alfredo

    2002-01-01

    We present a model of flavor based on a discrete local symmetry that reproduces all fermion masses and mixing angles both in the quark and lepton sectors. The particle content of the model is that of the standard model plus an additional flavon field. All the fields propagate in a fifth universal extra dimension and the flavor scale is associated with the cutoff of the 5D theory which is $\\sim 10$ TeV. The Yukawa matrices as well as the Majorana mass matrix for the neutrinos are generated by higher dimension operators involving the flavon field. When the flavon field acquires a vacuum expectation value it breaks the flavor symmetry and thus generates the Yukawa couplings. The model is consistent with the nearly bimaximal solution to the solar and atmospheric neutrino deficits.

  9. HOFSTEDE’S CULTURAL DIMENSIONS AND MANAGEMENT IN CORPORATIONS

    Directory of Open Access Journals (Sweden)

    Alexandrina Cristina VASILE

    2016-06-01

    Full Text Available In many cases the success or failure in management is caused by the way leaders understand the cultural environment the companies develop. The leadership approach and rules applied increase or decrease performance in economies and companies. The paper describes the relation between management failure or success and the management adjustment to the cultural dimensions. People build organizations and rule them according to their values, but in the corporation field specific values might be successfully applied or implying the whole company failure. The analysis is made based on Hofstede research and having in mind his dimensions on a dynamic hypothetical case where there are taken into account cultural dimensions for Romania, Germany, Kazakhstan and United States of America.

  10. Lens Biology is a Dimension of Neurobiology.

    Science.gov (United States)

    Frederikse, Peter; Kasinathan, Chinnaswamy

    2017-02-04

    There is a second cell type in your body that expresses scores of the most intensively studied genes in neuroscience and exclusively shares critical interdependent modes of molecular regulation that include a network first described as responsible for the basic bifurcation of neuronal from non-neuronal gene expression in vertebrates. Neurons and lens cells are among the most ancient animal cell types, yet neurons have an exclusive status also attributed to roles underlying sensation, movement, and cognition. However, this status is challenged by cells in the lens of the eye. The extent and detail of internally consistent parallels with neuron biology now catalogued in their second native cell type in the lens provide a detailed model of interdependent neuron gene expression in lens development and non-neuronal role in vision. These comprehensive parallels identify the lens as a dimension of neurobiology and a fundamental new perspective on neurodevelopment and its disorders. Finally, this understanding identifies that hallmark neuronal gene expression and key modes of associated molecular regulation evolved in tandem in the lens.

  11. The social dimension of entrepreneurship

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    2005-01-01

    This paper proposes an integrative framework to conceptualize important social dimensions of entrepreneurship. The paper reviews and evaluates the current status of research dealing with entrepreneurship, social capital and trust. The proposed framework rests on the recognition that entrepreneurial...... activities are results of social interactions and mechanisms. In consequence, entrepreneurship cannot merely be understood in terms of 'personality characteristics' or in sterile economic terms. The paper addresses by concluding implications for practitioners and for research....

  12. The social dimensions of entrepreneurship

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    2005-01-01

    This paper proposes an integrative framework to conceptualize important social dimensions of entrepreneurship. The paper reviews and evaluates the current status of research dealing with entrepreneurship, social capital and trust. The proposed framework rests on the recognition that entrepreneurial...... activities are results of social interactions and mechanisms. In consequence, entrepreneurship cannot merely be understood in terms of "personality characteristics" or in sterile economic terms. In closing, the paper addresses implications for practitioners and for research. Udgivelsesdato: AUG...

  13. The social dimensions of entrepreneurship

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    2005-01-01

    activities are results of social interactions and mechanisms. In consequence, entrepreneurship cannot merely be understood in terms of "personality characteristics" or in sterile economic terms. In closing, the paper addresses implications for practitioners and for research. Udgivelsesdato: AUG......This paper proposes an integrative framework to conceptualize important social dimensions of entrepreneurship. The paper reviews and evaluates the current status of research dealing with entrepreneurship, social capital and trust. The proposed framework rests on the recognition that entrepreneurial...

  14. Open strategy: Dimensions, dilemmas, dynamics

    OpenAIRE

    Hautz, J; D. Seidl; Whittington, R.

    2016-01-01

    Responding to increasing practitioner and academic interest in Open Strategy, this article builds on recent theoretical and empirical studies in order to advance research in the following ways. We begin by developing a definition of Open Strategy that emphasizes variation along the two dimensions of transparency and inclusion, as well as the dilemmas and dynamics inherent in its practices. We identify five dilemmas in particular: those of process, commitment, disclosure, empowerment and escal...

  15. Performance appraisal: dimensions and determinants

    OpenAIRE

    2012-01-01

    The determinants of the dimensions that shape a formal system of performance appraisal are studied in relation to a sample of Spanish manufacturing establishments. In particular, the factors that influence the measures used to evaluate performance, the person who carries out such appraisal and its frequency are analysed. Our results show that the characteristics of the establishment exert a significant influence on the configuration of performance appraisal. Specifically, we find that the use...

  16. Læsningens sproglige dimension

    DEFF Research Database (Denmark)

    Mulvad, Ruth; Kabel, Kristine

    2007-01-01

    Flere af projekterne i Nationalt Videncenter for Læsning arbejder for at styrke læsning gennem et kombineret fokus på teksters sproglige dimension og på den pædagogiske kontekst, som teksterne indgår i. To af dem har som mål at designe et kompetenceløft for seminarieundervisere og at udvikle...

  17. Variations of The Fifth Dimension

    DEFF Research Database (Denmark)

    Jensen, Tine

    koncept for læring og leg, kaldet Femte Dimension, eller 5D, som er udviklet af professor Michael Cole og kol­leger i mere end 20 år på University of California, San Diego, Laboratory of Comparative Human Cognition. 5D er et forsknings-, og læringsfællesskab, som arbejder med udvikling af lokale ’sites...

  18. Online estimation of internal stack temperatures in solid oxide fuel cell power generating units

    Science.gov (United States)

    Dolenc, B.; Vrečko, D.; Juričić, Ɖ.; Pohjoranta, A.; Pianese, C.

    2016-12-01

    Thermal stress is one of the main factors affecting the degradation rate of solid oxide fuel cell (SOFC) stacks. In order to mitigate the possibility of fatal thermal stress, stack temperatures and the corresponding thermal gradients need to be continuously controlled during operation. Due to the fact that in future commercial applications the use of temperature sensors embedded within the stack is impractical, the use of estimators appears to be a viable option. In this paper we present an efficient and consistent approach to data-driven design of the estimator for maximum and minimum stack temperatures intended (i) to be of high precision, (ii) to be simple to implement on conventional platforms like programmable logic controllers, and (iii) to maintain reliability in spite of degradation processes. By careful application of subspace identification, supported by physical arguments, we derive a simple estimator structure capable of producing estimates with 3% error irrespective of the evolving stack degradation. The degradation drift is handled without any explicit modelling. The approach is experimentally validated on a 10 kW SOFC system.

  19. Wave equations in higher dimensions

    CERN Document Server

    Dong, Shi-Hai

    2011-01-01

    Higher dimensional theories have attracted much attention because they make it possible to reduce much of physics in a concise, elegant fashion that unifies the two great theories of the 20th century: Quantum Theory and Relativity. This book provides an elementary description of quantum wave equations in higher dimensions at an advanced level so as to put all current mathematical and physical concepts and techniques at the reader’s disposal. A comprehensive description of quantum wave equations in higher dimensions and their broad range of applications in quantum mechanics is provided, which complements the traditional coverage found in the existing quantum mechanics textbooks and gives scientists a fresh outlook on quantum systems in all branches of physics. In Parts I and II the basic properties of the SO(n) group are reviewed and basic theories and techniques related to wave equations in higher dimensions are introduced. Parts III and IV cover important quantum systems in the framework of non-relativisti...

  20. Wormholes leading to extra dimensions

    CERN Document Server

    Bronnikov, K A

    2016-01-01

    In 6D general relativity with a scalar field as a source of gravity, a new type of static wormhole solutions is presented: such wormholes connect our universe with a small 2D extra subspace with a universe where this extra subspace is large, and the whole space-time is effectively 6-dimensional. We consider manifolds with the structure M0 x M1 x M2 , where M0 is 2D Lorentzian space-time while each of M1 an M2 can be a 2-sphere or a 2-torus. After selecting possible asymptotic behaviors of the metric functions compatible with the field equations, we give two explicit examples of wormhole solutions with spherical symmetry in our space-time and toroidal extra dimensions. In one example, with a massless scalar field (it is a special case of a well-known more general solution), the extra dimensions have a large constant size at the "far end"; the other example contains a nonzero potential $V(\\phi)$ which provides a 6D anti-de Sitter asymptotic, where all spatial dimensions are infinite.

  1. Quantum irreversibility in arbitrary dimension

    Energy Technology Data Exchange (ETDEWEB)

    Anselmi, Damiano

    2000-02-14

    Some recent ideas are generalized from four dimensions to the general dimension n. In quantum field theory, two terms of the trace anomaly in external gravity, the Euler density G{sub n} and {open_square}{sup n/2-1}R, are relevant to the problem of quantum irreversibility. By adding the divergence of a gauge-invariant current, G{sub n} can be extended to a new notion of Euler density G-tilde{sub n}, linear in the conformal factor. We call it pondered Euler density. This notion relates the trace-anomaly coefficients a and a{sup '} of G{sub n} and {open_square}{sup n/2-1}R in a universal way (a=a{sup '}) and gives a formula expressing the total RG flow of a as the invariant area of the graph of the beta function between the fixed points. I illustrate these facts in detail for n=6 and check the prediction to the fourth-loop order in the phi (cursive,open) Greek{sup 3}-theory. The formula of quantum irreversibility for general n even can be extended to n odd by dimensional continuation. Although the trace anomaly in external gravity is zero in odd dimensions, I show that the odd-dimensional formula has a predictive content.

  2. Quantum irreversibility in arbitrary dimension

    CERN Document Server

    Anselmi, D

    2000-01-01

    Some recent ideas are generalized from four dimensions to the general dimension n. Two terms of the trace anomaly in external gravity, the Euler density G_n and Box^{n/2-1}R, are relevant to the problem of quantum irreversibility. By adding the divergence of a gauge-invariant current, G_n can be extended to a new notion of Euler density, linear in the conformal factor. We call it pondered Euler density. This notion relates the trace-anomaly coefficients a and a' of G_n and Box^{n/2-1}R in a universal way (a=a') and gives a formula expressing the total RG flow of a as the invariant area of the graph of the beta function between the fixed points. I illustrate these facts in detail for n=6 and check the prediction to the fourth-loop order in the phi^3-theory. The formula of quantum irreversibility for general n even can be extended to n odd by dimensional continuation. Although the trace anomaly in external gravity is zero in odd dimensions, I show that the odd-dimensional formula has a predictive content.

  3. Selective laser melting: a unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures.

    Science.gov (United States)

    Mullen, Lewis; Stamp, Robin C; Fox, Peter; Jones, Eric; Ngo, Chau; Sutcliffe, Christopher J

    2010-01-01

    In this study, the unit cell approach, which has previously been demonstrated as a method of manufacturing porous components suitable for use as orthopedic implants, has been further developed to include randomized structures. These random structures may aid the bone in-growth process because of their similarity in appearance to trabecular bone and are shown to carry legacy properties that can be related back to the original unit cell on which they are ultimately based. In addition to this, it has been shown that randomization improves the mechanical properties of regular unit cell structures, resulting in anticipated improvements to both implant functionality and longevity. The study also evaluates the effect that a post process sinter cycle has on the components, outlines the improved mechanical properties that are attainable, and also the changes in both the macro and microstructure that occur.

  4. Interleukin-8, interleukin-1β and tumour necrosis factor-α in sequential units of packed red blood cells collected from retired racing Greyhounds.

    Science.gov (United States)

    Purcell, S L; Claus, M; Hosgood, G; Smart, L

    2017-01-01

    We hypothesised that concentrations of interleukin-8 (IL-8), interleukin-1β (IL-1β) and tumour necrosis factor-α (TNF-α) would increase during storage in the third sequential unit (U3) of canine packed red blood cells (PRBC) collected from terminal donors in haemorrhagic shock. We further hypothesised that leucoreduction would prevent cytokine accumulation in U3 and that cytokine concentrations in U3 would be higher than in the first units (U1) collected from the same dogs. U1 and U3 were each collected from 12 anaesthetised healthy Greyhounds. Removal of leucocytes from half of each PRBC unit produced one leucoreduced (LR) and one non-leucoreduced (NLR) unit. Canine IL-8, IL-1β and TNF-α concentrations were measured in samples collected from the units during storage on days 0, 10, 20, 30 and 37. The IL-8 concentration in U3 NLR units was significantly higher on days 10, 20, 30 and 37 than on day 0 and was significantly higher than in the LR units at all time points. The IL-1β concentration in U3 did not change over time, or between LR and NLR units. TNF-α was not detected in any unit. There were no significant differences in IL-8 or IL-1β concentrations between U3 and U1 at any time point; however, some NLR U3 units had markedly elevated IL-8 concentrations at day 37 (2060-20,682 pg/mL) compared with NLR U1 units (3369-5280 pg/mL). NLR U3 units collected from dogs in haemorrhagic shock showed a significant increase in IL-8 concentrations during storage. Leucoreduction was effective at preventing the accumulation of IL-8. There was no difference detected between U3 and U1. © 2017 Australian Veterinary Association.

  5. Closure Report for Corrective Action Unit 116: Area 25 Test Cell C Facility, Nevada National Security Site, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Restoration

    2011-09-29

    This Closure Report (CR) presents information supporting closure of Corrective Action Unit (CAU) 116, Area 25 Test Cell C Facility. This CR complies with the requirements of the Federal Facility Agreement and Consent Order (FFACO) that was agreed to by the State of Nevada; the U.S. Department of Energy (DOE), Environmental Management; the U.S. Department of Defense; and DOE, Legacy Management (FFACO, 1996 [as amended March 2010]). CAU 116 consists of the following two Corrective Action Sites (CASs), located in Area 25 of the Nevada National Security Site: (1) CAS 25-23-20, Nuclear Furnace Piping and (2) CAS 25-41-05, Test Cell C Facility. CAS 25-41-05 consisted of Building 3210 and the attached concrete shield wall. CAS 25-23-20 consisted of the nuclear furnace piping and tanks. Closure activities began in January 2007 and were completed in August 2011. Activities were conducted according to Revision 1 of the Streamlined Approach for Environmental Restoration Plan for CAU 116 (U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office [NNSA/NSO], 2008). This CR provides documentation supporting the completed corrective actions and provides data confirming that closure objectives for CAU 116 were met. Site characterization data and process knowledge indicated that surface areas were radiologically contaminated above release limits and that regulated and/or hazardous wastes were present in the facility.

  6. Study on Use of Fuel-Cell Auxiliary Power Units in Refrigerator Cars Employed for Delivery to Convenience Store

    Science.gov (United States)

    Katayama, Noboru; Kamiyama, Hideyuki; Kogoshi, Sumio; Kudo, Yusuke; Fukada, Takafumi; Ogawa, Makoto

    The use of fuel-cell auxiliary power units (FC-APU) in refrigerator cars employed delivery to for convenience store delivery has been studied. The delivery pattern is assumed to be a typical pattern that includes driving between convenience stores or between a delivery center and a convenience store, unloading, driver's lunch break. The M15 driving mode, which simulates the driving condition in urban areas, is used as the driving mode in the delivery pattern. The FC-APU system includes a proton-exchange membrane fuel cell (PEFC) module, an inverter, and DC/DC converter. Bench tests of the FC-APU are performed to determine the hydrogen fuel consumption rate and the energy efficiency; these values depend on the output power of the PEFC module. The calculated relationship between the output power and fuel consumption rate of a current used system, which consists of an alternator and a secondary battery, are used to estimate the energy efficiency of the current used system. On the basis of the measurement data in this study and the results for the model proposed by Brodric et al. [C. J. Brodrick et al., Trans. Res. D, vol 7, pp. 303 (2002)], the payback period is calculated. The results indicate that the payback period would be 2.1 years when the FC-APU operates at a load of 70%.

  7. Synchronization of stochastic Ca²(+) release units creates a rhythmic Ca²(+) clock in cardiac pacemaker cells.

    Science.gov (United States)

    Maltsev, Anna V; Maltsev, Victor A; Mikheev, Maxim; Maltseva, Larissa A; Sirenko, Syevda G; Lakatta, Edward G; Stern, Michael D

    2011-01-19

    In sinoatrial node cells of the heart, beating rate is controlled, in part, by local Ca²(+) releases (LCRs) from the sarcoplasmic reticulum, which couple to the action potential via electrogenic Na(+)/Ca²(+) exchange. We observed persisting, roughly periodic LCRs in depolarized rabbit sinoatrial node cells (SANCs). The features of these LCRs were reproduced by a numerical model consisting of a two-dimensional array of stochastic, diffusively coupled Ca²(+) release units (CRUs) with fixed refractory period. Because previous experimental studies showed that β-adrenergic receptor stimulation increases the rate of Ca²(+) release through each CRU (dubbed I(spark)), we explored the link between LCRs and I(spark) in our model. Increasing the CRU release current I(spark) facilitated Ca²(+)-induced-Ca²(+) release and local recruitment of neighboring CRUs to fire more synchronously. This resulted in a progression in simulated LCR size (from sparks to wavelets to global waves), LCR rhythmicity, and decrease of LCR period that parallels the changes observed experimentally with β-adrenergic receptor stimulation. The transition in LCR characteristics was steeply nonlinear over a narrow range of I(spark), resembling a phase transition. We conclude that the (partial) periodicity and rate regulation of the "Calcium clock" in SANCs are emergent properties of the diffusive coupling of an ensemble of interacting stochastic CRUs. The variation in LCR period and size with I(spark) is sufficient to account for β-adrenergic regulation of SANC beating rate.

  8. Electrical start-up for diesel fuel processing in a fuel-cell-based auxiliary power unit

    Science.gov (United States)

    Samsun, Remzi Can; Krupp, Carsten; Tschauder, Andreas; Peters, Ralf; Stolten, Detlef

    2016-01-01

    As auxiliary power units in trucks and aircraft, fuel cell systems with a diesel and kerosene reforming capacity offer the dual benefit of reduced emissions and fuel consumption. In order to be commercially viable, these systems require a quick start-up time with low energy input. In pursuit of this end, this paper reports an electrical start-up strategy for diesel fuel processing. A transient computational fluid dynamics model is developed to optimize the start-up procedure of the fuel processor in the 28 kWth power class. The temperature trend observed in the experiments is reproducible to a high degree of accuracy using a dual-cell approach in ANSYS Fluent. Starting from a basic strategy, different options are considered for accelerating system start-up. The start-up time is reduced from 22 min in the basic case to 9.5 min, at an energy consumption of 0.4 kW h. Furthermore, an electrical wire is installed in the reformer to test the steam generation during start-up. The experimental results reveal that the generation of steam at 450 °C is possible within seconds after water addition to the reformer. As a result, the fuel processor can be started in autothermal reformer mode using the electrical concept developed in this work.

  9. Study of serum ferritin in donors of two red blood cells units collected by apheresis.

    Science.gov (United States)

    González, Maria Luz Dobao; Maia, Salome; Mesquita, Paula; Bessa, Milena

    2013-10-01

    To analyze the recovery of iron stores without supplementation, when keeping an interval of six months between donations. From April 2007 to May 2011, 308 regular and voluntary donors were selected. The apheresis collections were performed using ALYX® Component Collection System-Fenwal™. The hematological parameters were analyzed using the Cell DIN Sapphire - Abbot Diagnostics, and the serum ferritin by sandwich immunoassay method with fluorescence detection in final phase (ELFA) - Vidas® Ferritin-Biomérieux SA. A descriptive statistical analysis was performed for each hematological parameters and serum ferritin. The median hemoglobin concentration was 15.6g/dL (14, 18.4) in the first procedure and remains constant at subsequent donations. The ferritin median concentration was 64.6 μg/L (7.2, 886). A decrease of 15.6% was observed when compared the first to the second procedure with a median 54.6 μg/L (8.3, 213.7). Paradoxically, this decrease is not evident in the subsequent procedures, where an increase of 14.6% and 3.4% for the third and fourth procedure respectively was observed. Changes in ferritin values show statistically significant differences between the first and second collection, but this difference disappeared in subsequent donations. The analysis of MCH in each collection indicates that the significant difference between first and second donation (p1-2ferritin found between procedures and the beginning of the stabilization of ferritin levels. The determination of ferritin appears not to be the most important parameter to consider at the time of donor selection and suggests that other factors unrelated to the donation may play a significant role. A decrease in serum ferritin was observed at the beginning, but it seems to attend a recovery and stabilization in the successive procedures. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Prophylaxis with levofloxacin: impact on bacterial susceptibility and epidemiology in a hematopoietic stem cell transplant unit

    Directory of Open Access Journals (Sweden)

    Livia Amaral Alonso Lopes

    2014-01-01

    Full Text Available Background: The emergence of resistance has been demonstrated in cancer treatment centers where prophylaxis with fluoroquinolone is used. Objective: Considering the importance of epidemiological monitoring as a strategy in choosing protocols involving antibiotics, this study aimed to evaluate the emergence of quinolone resistance and changes in the local epidemiology in a hematopoietic stem cell transplant service. Methods: For this study, 60 positive cultures before the prophylactic use of levofloxacin (period A: 2007-2008 and 118 cultures after starting the use of prophylactic levofloxacin (period B: 2010-2011 were evaluated. Results: Resistance increased for all the different types of bacteria isolated (from 46.0% to 76.5%; p-value = 0.0002. Among Gram-negative bacteria, resistance increased from 21.4% to 60.7% (p-value = 0.0163 and among Gram-positive bacteria, it increased from 55.6% to 82.9% (p-value = 0.0025. The use of levofloxacin increased from 19.44 defined daily doses per 1,000 patient-days in period A to 166.64 in period B. The use of broad spectrum antibiotics remained unchanged. Considering bacteria associated with infection, 72 and 76 were isolated in periods A and B, respectively. There was a reduction in the rate of Gramnegative bacteria in cultures associated with infection (3.81 vs. 2.00 cultures/1,000 patientdays; p-value = 0.008. Conclusion: The study of prophylaxis with levofloxacin demonstrated that there was a decrease in infections by Gram-negative bacteria; however, bacterial resistance increased, even though the use of broad-spectrum antibiotics remained unchanged. Constant monitoring of local epidemiology combined with research on clinical outcomes is needed to evaluate the effectiveness of prophylaxis.

  11. First-principles investigation of the effect of charged unit cell on the electronic structure of two-dimensional MoS2

    Science.gov (United States)

    Shekaari, Ashkan; Abolhassani, Mohammad Reza; Lashgari, Hamed

    2017-01-01

    Density-functional theory has been applied to investigate the effect of charged unit cell on the structural and electronic properties of two-dimensional MoS2 within PBE-GGA. The charge of the unit cell of the monolayer changes from zero to n = ± 4 e with e the absolute value of the elementary electric charge. Variations of the lattice constant, Mo-S bond length, S-Mo-S bond angle, total energy, exchange and correlation contributions, and the Fermi level versus n have been calculated quantitatively, indicating decrease in the stability of the atomic structure of the monolayer with increase in the absolute value of n. It is found that the Fermi level for two-dimensional MoS2 is a function of both the number of electrons in allowed states and the inverse of the volume of the unit cell. The electronic properties of each monolayer have been also calculated via examining the related electronic band structure and density of states. Results broadly support the view that the effect of charged unit cell (n =+ e to - 4 e) on the electronic properties of MoS2 monolayer is manifested in the form of semiconductor-to-metal transition in addition to the Fermi level shift. It is also verified that as the negative charge of the unit cell increases from n = - e to - 4 e , there is an ever-increasing trend in the total number of allowed electronic states at the Fermi level, implying a direct correlation between electrical conductivity and the value of n in a way that the more negative the charge of the unit cell, the higher the electrical conductivity of the monolayer.

  12. Unit Cell Analysis of the Superelastic Behavior of Open-Cell Tetrakaidecahedral Shape Memory Alloy Foam under Quasi-Static Loading

    Directory of Open Access Journals (Sweden)

    Guillaume Maîtrejean

    2014-01-01

    Full Text Available Cellular solid materials and, more specifically, foams are increasingly common in many industrial applications due to their attractive characteristics. The tetrakaidecahedral foam microstructure, which can be observed in many types of foams, is studied in the present work in association with shape memory alloys (SMA material. SMA foams are of particular interest as they associate both the shape memory effect and the superelasticity with the characteristics of foam. A Unit Cell Finite Element Method approach is used, an approach that allows accurate predicting of the macroscale response of the foam with a highly reduced numerical effort. The tetrakaidecahedral foam’s responses, both in the elastic and in the superelastic stages, are then extracted and compared with results from the literature. The tetrakaidecahedral geometry is found to be of particular interest when associated with SMA as it takes more advantage of the superelastic property of the material than foams with randomly distributed porosity.

  13. Dimensions of Attractors in Pinched Skew Products

    Science.gov (United States)

    Gröger, M.; Jäger, T.

    2013-05-01

    We study dimensions of strange non-chaotic attractors and their associated physical measures in so-called pinched skew products, introduced by Grebogi and his coworkers in 1984. Our main results are that the Hausdorff dimension, the pointwise dimension and the information dimension are all equal to one, although the box-counting dimension is known to be two. The assertion concerning the pointwise dimension is deduced from the stronger result that the physical measure is rectifiable. Our findings confirm a conjecture by Ding, Grebogi and Ott from 1989.

  14. Dimensions of attractors in pinched skew products

    CERN Document Server

    Gröger, M

    2011-01-01

    We study dimensions of strange non-chaotic attractors and their associated physical measures in so-called pinched skew products, introduced by Grebogi and his coworkers in 1984. Our main results are that the Hausdorff dimension, the pointwise dimension and the information dimension are all equal to one, although the box-counting dimension is known to be two. The assertion concerning the pointwise dimension is deduced from the stronger result that the physical measure is rectifiable. Our findings confirm a conjecture by Ding, Grebogi and Ott from 1989.

  15. Effect of growth mechanisms on the deformation of a unit cell and polarization reversal in barium-strontium titanate heterostructures on magnesium oxide

    Science.gov (United States)

    Mukhortov, V. M.; Golovko, Yu. I.; Biryukov, S. V.; Anokhin, A.; Yuzyuk, Yu. I.

    2016-01-01

    The effect of a growth mechanism on the unit cell strain and the related change in the properties of single-crystal Ba0.8Sr0.2TiO3 films grown on MgO substrates according to the Frank-van der Merwe and Volmer-Weber growth mechanisms is studied. The unit cell strain is shown to depend substantially on the film thickness and the growth mechanism. It is found that the same film-substrate pair can be used to vary stresses in the film from two-dimensional tensile to compressive stresses due to a change in the growth mechanism and the film thickness.

  16. Normality and Finite-state Dimension of Liouville numbers

    CERN Document Server

    Nandakumar, Satyadev

    2012-01-01

    Liouville numbers were the first class of real numbers which were proven to be transcendental. It is easy to construct non-normal Liouville numbers. Kano and Bugeaud have proved, using analytic techniques, that there are normal Liouville numbers. Here, for a given base k >= 2, we give two simple constructions of a Liouville number which is normal to the base k. The first construction is combinatorial, and is based on de Bruijn sequences. A real number in the unit interval is normal if and only if its finite-state dimension is 1. We generalize our construction to prove that for any rational r in the closed unit interval, there is a Liouville number with finite state dimension r. This refines Staiger's result that the set of Liouville numbers has constructive Hausdorff dimension zero, showing a new quantitative classification of Liouville numbers can be attained using finite-state dimension. In the second number-theoretic construction, we use an arithmetic property of numbers - the existence of primitive roots ...

  17. Vlasov simulation in multiple spatial dimensions

    CERN Document Server

    Rose, Harvey A

    2011-01-01

    A long-standing challenge encountered in modeling plasma dynamics is achieving practical Vlasov equation simulation in multiple spatial dimensions over large length and time scales. While direct multi-dimension Vlasov simulation methods using adaptive mesh methods [J. W. Banks et al., Physics of Plasmas 18, no. 5 (2011): 052102; B. I. Cohen et al., November 10, 2010, http://meetings.aps.org/link/BAPS.2010.DPP.NP9.142] have recently shown promising results, in this paper we present an alternative, the Vlasov Multi Dimensional (VMD) model, that is specifically designed to take advantage of solution properties in regimes when plasma waves are confined to a narrow cone, as may be the case for stimulated Raman scatter in large optic f# laser beams. Perpendicular grid spacing large compared to a Debye length is then possible without instability, enabling an order 10 decrease in required computational resources compared to standard particle in cell (PIC) methods in 2D, with another reduction of that order in 3D. Fur...

  18. Ammonia concentration and bacterial evaluation of feline whole blood and packed red blood cell units stored for transfusion

    OpenAIRE

    Eva Spada; Daniela Proverbio; Piera Anna Martino; Luciana Baggiani; Roberta Perego; Nora Roggero

    2014-01-01

    Ammonia concentrations increase in human, canine and equine WB and PRBC units during storage. The aim of this study was to determine the effect of storage on ammonia concentration in feline WB and PRBC units stored in a veterinary blood bank and to evaluate possible correlations with bacterial contamination. Ammonia concentration was evaluated in 15 WB units and 2 PRBC units on day 1 and at the end of storage after 35 and 42 days, respectively. In an additional 5 WB units and 4 PRBC units amm...

  19. Search for extra space dimensions with ATLAS

    Indian Academy of Sciences (India)

    Ambreesh Gupta; ATLAS Collaboration

    2004-03-01

    If extra spatial dimensions were to exist, they could provide a solution to the hierarchy problem. The studies done by the ATLAS Collaboration on the sensitivity of the detector to various extra dimension models are reported in this document.

  20. NONHOMOGENEOUS HOPF EQUATIONS IN HIGHER DIMENSIONS

    Institute of Scientific and Technical Information of China (English)

    JIU QUANSEN

    1999-01-01

    The existence and uniqueness of the localclassical solution of nonhomogenuous Hopf equationsin higher dimensions are proved in this paper. Thissolution is obtained by vanishing the viscosity termof Burger's equations in higher dimensions.

  1. Personality dimensions and disorders in pathological gambling

    DEFF Research Database (Denmark)

    Odlaug, Brian Lawrence; Schreiber, Liana R N; Grant, Jon E

    2013-01-01

    This review presents the most current research in personality dimensions and disorders with respect to pathological gambling.......This review presents the most current research in personality dimensions and disorders with respect to pathological gambling....

  2. Noncentrosymmetric superconductors in one dimension

    Science.gov (United States)

    Samokhin, K. V.

    2017-02-01

    We study the fermionic boundary modes (Andreev bound states) in a time-reversal invariant one-dimensional superconductor. In the presence of a substrate, spatial inversion symmetry is broken and the electronic properties are strongly affected by an antisymmetric spin-orbit coupling. We assume an arbitrary even number of nondegenerate bands crossing the Fermi level. We show that there is only one possible pairing symmetry in one dimension, an analog of s -wave pairing. The zero-energy Andreev bound states are present if the sign of the gap function in an odd number of the bands is different from all other bands.

  3. Correlation dimension of complex networks

    CERN Document Server

    Lacasa, Lucas

    2012-01-01

    We propose a new measure to characterize the dimension of complex networks based on the ergodic theory of dynamical systems. This measure is derived from the correlation sum of a trajectory generated by a random walker navigating the network, and extends the classical Grassberger-Procaccia algorithm to the context of complex networks. The method is validated with reliable results for both synthetic networks and real-world networks such as the world air-transportation network or urban networks, and provides a computationally fast way for estimating the dimensionality of networks which only relies on the local information provided by the walkers.

  4. Flavor Models In Extra Dimensions

    CERN Document Server

    Valadez, J

    2005-01-01

    This thesis consists of implementing flavor symmetries in the context of extra dimensions. To the particle content of the Standard Model we add an additional scalar (flavon) field and we assume that all the fields propagate in the extra-dimensional space-time. When the flavon field acquires a vacuum expectation value the flavor symmetry is effectively broken thus generating the Yukawa textures associated with the particles. An specific model in 5D that reproduces all fermion masses, mixing angles and ratios is presented.

  5. Extended scaling in high dimensions

    Science.gov (United States)

    Berche, B.; Chatelain, C.; Dhall, C.; Kenna, R.; Low, R.; Walter, J.-C.

    2008-11-01

    We apply and test the recently proposed 'extended scaling' scheme in an analysis of the magnetic susceptibility of Ising systems above the upper critical dimension. The data are obtained by Monte Carlo simulations using both the conventional Wolff cluster algorithm and the Prokof'ev-Svistunov worm algorithm. As already observed for other models, extended scaling is shown to extend the high-temperature critical scaling regime over a range of temperatures much wider than that achieved conventionally. It allows for an accurate determination of leading and sub-leading scaling indices, critical temperatures and amplitudes of the confluent corrections.

  6. The fourth dimension simply explained

    CERN Document Server

    Manning, Henry P

    2005-01-01

    To remove the contents of an egg without puncturing its shell or to drink the liquor in a bottle without removing the cork is clearly unthinkable - or is it? Understanding the world of Einstein and curved space requires a logical conception of the fourth dimension.This readable, informative volume provides an excellent introduction to that world, with 22 essays that employ a minimum of mathematics. Originally written for a contest sponsored by Scientific American, these essays are so well reasoned and lucidly written that they were judged to merit publication in book form. Their easily unders

  7. Nonlinear Filtering in High Dimension

    Science.gov (United States)

    2014-06-02

    dimension cardV . Remark 4.9. In the language of statistical mechanics, we exploit the fact that the smoothing distribution Px(X0, . . . , Xn ∈ · |Y1...does the mixing property of the random field X imply the conditional mixing property of (X, Y )? It will be insightful to reformulate the problem in...edge observations in Example 7.17 is merely cosmetic: the same example can be reformulated in terms of vertex observations. Indeed, let us define the

  8. Cultural Dimensions Of Legal Discourse

    Directory of Open Access Journals (Sweden)

    Sierocka Halina

    2014-09-01

    Full Text Available Despite the intention for precision and accuracy, legal discourse is oftentimes complex, archaic and ambiguous - which gives rise to contentious interpretation. Moreover, little or no attention is paid to the cultural dimension of legal discourse, which plays a critical role in the translation and interpretation of legal texts, as well as in the application of law. This paper endeavours to illustrate the impact the culture, or, more precisely, legal culture has on the way legal texts are construed or translated and to present problems which arise in the interpretation, translation and application of law as a result of cultural diversities

  9. Low Dimension Semiconducting Composite Nanomaterials

    Institute of Scientific and Technical Information of China (English)

    WANG Mang; CHEN Hong-zheng; SUN Jing-zhi

    2004-01-01

    Recently, low dimension nanostructures have gained considerable attention due to their technological potential as unique types of nanoscale building blocks for future optoelectronic devices and systems. Semiconducting composite nanomaterials, which can combine the advantages of two or more components, have been the focus in the area of nanomaterials synthesis and device application.In this paper, we report our work on the preparation of composite nanomaterials based on CNTs.CNTs were coated by organic or inorganic species via novel and facile methods (Fig. 1 and Fig.2).These functional CNTs based composites show eminent prospects and opportunities for new applications in a wide variation of areas.

  10. Quantum cosmology near two dimensions

    Science.gov (United States)

    Bautista, Teresa; Dabholkar, Atish

    2016-08-01

    We consider a Weyl-invariant formulation of gravity with a cosmological constant in d -dimensional spacetime and show that near two dimensions the classical action reduces to the timelike Liouville action. We show that the renormalized cosmological term leads to a nonlocal quantum momentum tensor which satisfies the Ward identities in a nontrivial way. The resulting evolution equations for an isotropic, homogeneous universe lead to slowly decaying vacuum energy and power-law expansion. We outline the implications for the cosmological constant problem, inflation, and dark energy.

  11. Investigation of the Start-up Strategy for a Solid Oxide Fuel Cell Based Auxiliary Power Unit under Transient Conditions

    Directory of Open Access Journals (Sweden)

    Michael R. von Spakovsky

    2005-06-01

    Full Text Available

    A typical approach to the synthesis/design optimization of energy systems is to only use steady state operation and high efficiency (or low total life cycle cost at full load as the basis for the synthesis/design. Transient operation as reflected by changes in power demand, shut-down, and start-up are left as secondary tasks to be solved by system and control engineers once the synthesis/design is fixed. However, start-up and shut-down may be events that happen quite often and, thus, may be quite important in the creative process of developing the system. This is especially true for small power units used in transportation applications or for domestic energy supplies, where the load demand changes frequently and peaks in load of short duration are common. The duration of start-up is, of course, a major factor which must be considered since rapid system response is an important factor in determining the feasibility of solid oxide fuel cell (SOFC based auxiliary power units (APUs. Start-up and shut-down may also significantly affect the life span of the system due to thermal stresses on all system components. Therefore, a proper balance must be struck between a fast response and the costs of owning and operating the system so that start-up or any other transient process can be accomplished in as short a time as possible yet with a minimum in fuel consumption.

    In this research work we have been studying the effects of control laws and strategies and transients on system performance. The results presented in this paper are based on a set of transient models developed and implemented for the components of a 5 kWe net power SOFC based APU and for the high-fidelity system which results from their integration. The simulation results given below are for two different start-up approaches: one with steam recirculation and component pre-heating and the second without either. These start-up simulations were performed for fixed values of a number of

  12. Liberating Efimov physics from three dimensions

    OpenAIRE

    Nishida, Yusuke; Tan, Shina

    2011-01-01

    When two particles attract via a resonant short-range interaction, three particles always form an infinite tower of bound states characterized by a discrete scaling symmetry. It has been considered that this Efimov effect exists only in three dimensions. Here we review how the Efimov physics can be liberated from three dimensions by considering two-body and three-body interactions in mixed dimensions and four-body interaction in one dimension. In such new systems, intriguing phenomena appear,...

  13. The human dimension of program evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Vine, E.L.

    1993-05-01

    Social science issues play an important role in the evaluation of demand-side management (DSM) programs. In the very early years of DSM program evaluation in the United States, there was a fair amount of social science research applied to the behavioral aspects of energy efficiency. Since the mid-1980s, however, there has been a heavy emphasis on impact evaluation, technical measurement, and engineering methodologies. Although some have articulated the need to integrate behavioral research into energy evaluation, most emphasis has tended to center on the technical/engineering aspects. Increasingly, however, the realization is growing that it is necessary to integrate important behavioral variables into impact evaluation techniques. In addition, it is being further recognized that behavioral research questions are central to a number of critical evaluation issues: e.g., design of samples for evaluation studies, net energy savings, self-selection bias, free riders and free drivers, persistence of energy savings, process evaluation, and market impact evaluation. Finally, it is increasingly being realized that the utilization of evaluation results relies heavily on behavioral factors. Social science researchers should be poised to expect a greatly expanded role of behavioral research in evaluation. As new techniques are developed and perfected, as the results of impact evaluations become more abundant, and as the gap between technical energy savings potential and realized savings becomes more visible, research regarding the ``human dimension`` of program evaluation will be crucial. This paper provides an overview of the human dimension of program evaluation and focuses on key evaluation issues in demand-side management which will require the use of social science research for addressing these issues.

  14. Closure Report for Corrective Action Unit 261: Area 25 Test Cell A Leachfield System, Nevada Test Site, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    T. M. Fitzmaurice

    2001-04-01

    The purpose of this Closure Report (CR) is to provide documentation of the completed corrective action at the Test Cell A Leachfield System and to provide data confirming the corrective action. The Test Cell A Leachfield System is identified in the Federal Facility Agreement and Consent Order (FFACO) of 1996 as Corrective Action Unit (CAU) 261. Remediation of CAU 261 is required under the FFACO (1996). CAU 261 is located in Area 25 of the Nevada Test Site (NTS) which is approximately 140 kilometers (87 miles) northwest of Las Vegas, Nevada (Figure 1). CAU 261 consists of two Corrective Action Sites (CASS): CAS 25-05-01, Leachfield; and CAS 25-05-07, Acid Waste Leach Pit (AWLP) (Figures 2 and 3). Test Cell A was operated during the 1960s and 1970s to support the Nuclear Rocket Development Station. Various operations within Building 3124 at Test Cell A resulted in liquid waste releases to the Leachfield and the AWLP. The following existing site conditions were reported in the Corrective Action Decision Document (CADD) (U.S. Department of Energy, Nevada Operations Office [DOE/NV], 1999): Soil in the leachfield was found to exceed the Nevada Division of Environmental Protection (NDEP) Action Level for petroleum hydrocarbons, the U.S. Environmental Protection Agency (EPA) preliminary remediation goals for semi volatile organic compounds, and background concentrations for strontium-90; Soil below the sewer pipe and approximately 4.5 meters (m) (15 feet [ft]) downstream of the initial outfall was found to exceed background concentrations for cesium-137 and strontium-90; Sludge in the leachfield septic tank was found to exceed the NDEP Action Level for petroleum hydrocarbons and to contain americium-241, cesium-137, uranium-234, uranium-238, potassium-40, and strontium-90; No constituents of concern (COC) were identified at the AWLP. The NDEP-approved CADD (DOWNV, 1999) recommended Corrective Action Alternative 2, ''Closure of the Septic Tank and Distribution Box

  15. Single-unit-cell layer established Bi 2 WO 6 3D hierarchical architectures: Efficient adsorption, photocatalysis and dye-sensitized photoelectrochemical performance

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Hongwei; Cao, Ranran; Yu, Shixin; Xu, Kang; Hao, Weichang; Wang, Yonggang; Dong, Fan; Zhang, Tierui; Zhang, Yihe

    2017-12-01

    Single-layer catalysis sparks huge interests and gains widespread attention owing to its high activity. Simultaneously, three-dimensional (3D) hierarchical structure can afford large surface area and abundant reactive sites, contributing to high efficiency. Herein, we report an absorbing single-unit-cell layer established Bi2WO6 3D hierarchical architecture fabricated by a sodium dodecyl benzene sulfonate (SDBS)-assisted assembled strategy. The DBS- long chains can adsorb on the (Bi2O2)2+ layers and hence impede stacking of the layers, resulting in the single-unit-cell layer. We also uncovered that SDS with a shorter chain is less effective than SDBS. Due to the sufficient exposure of surface O atoms, single-unit-cell layer 3D Bi2WO6 shows strong selectivity for adsorption on multiform organic dyes with different charges. Remarkably, the single-unit-cell layer 3D Bi2WO6 casts profoundly enhanced photodegradation activity and especially a superior photocatalytic H2 evolution rate, which is 14-fold increase in contrast to the bulk Bi2WO6. Systematic photoelectrochemical characterizations disclose that the substantially elevated carrier density and charge separation efficiency take responsibility for the strengthened photocatalytic performance. Additionally, the possibility of single-unit-cell layer 3D Bi2WO6 as dye-sensitized solar cells (DSSC) has also been attempted and it was manifested to be a promising dye-sensitized photoanode for oxygen evolution reaction (ORR). Our work not only furnish an insight into designing single-layer assembled 3D hierarchical architecture, but also offer a multi-functional material for environmental and energy applications.

  16. Inter-relationships between single carbon units' metabolism and resting energy expenditure in weight-losing patients with small cell lung cancer. Effects of methionine supply and chemotherapy

    DEFF Research Database (Denmark)

    Sengeløv, H; Hansen, O P; Simonsen, L

    1994-01-01

    The one-carbon unit metabolism was investigated in 8 weight-losing patients with small cell carcinoma of the lung (SCLC). At diagnosis, 6 of the 8 patients had elevated formiminoglutamic acid (FIGLU) excretion after a histidine load, suggesting a lack of one-carbon units. In accordance, a signifi......The one-carbon unit metabolism was investigated in 8 weight-losing patients with small cell carcinoma of the lung (SCLC). At diagnosis, 6 of the 8 patients had elevated formiminoglutamic acid (FIGLU) excretion after a histidine load, suggesting a lack of one-carbon units. In accordance...... pretreatment FIGLU excretion and REE, although the REE measured in this group of patients was within the normal range. These data demonstrate an increased demand of "active" one-carbon units in energy consumption in a group of weight-losing cancer patients. The one-carbon unit deficit was reconditioned by oral......, a significant decrease of FIGLU excretion was observed in the patients after oral administration of DL-methionine for 4 days. The elevated FIGLU excretion was positively correlated to weight loss prior to diagnosis and negatively correlated to serum albumin at time of diagnosis. After 3 months of combination...

  17. Rings with finite Gorenstein injective dimension

    DEFF Research Database (Denmark)

    Holm, Henrik Granau

    2004-01-01

    In this paper we prove that for any associative ring R, and for any left R-module M with nite projective dimension, the Gorenstein injective dimension GidRM equals the usual injective dimension idRM. In particular, if GidRR is nite, then also idRR is nite, and thus R is Gorenstein (provided that R...

  18. DIMENSIONS FOR RANDOM SELF-CONFORMAL SETS

    Institute of Scientific and Technical Information of China (English)

    Liu Yanyan; Wu Jun

    2003-01-01

    A set is called regular if its Hausdorff dimension and upper box-counting dimension coincide.In this paper,we prove that the random self-conformal set is regular almost surely.Also we determine the dimensions for a class of random self-conformal sets.

  19. Speaker Identification Based on Fractal Dimensions

    Institute of Scientific and Technical Information of China (English)

    侯丽敏; 王朔中

    2003-01-01

    This paper discusses application of fractal dimensions to speech processing. Generalized dimensions of arbitrary orders and associated fractal parameters are used in speaker identification. A characteristic vactor based on these parameters is formed, and a recognition criterion definded in order to identify individual speakers. Experimental results show the usefulness of fractal dimensions in characterizing speaker identity.

  20. Spectral Dimension from Causal Set Nonlocal Dynamics

    CERN Document Server

    Belenchia, Alessio; Marciano, Antonino; Modesto, Leonardo

    2015-01-01

    We investigate the spectral dimension obtained from non-local continuum d'Alembertians derived from causal sets. We find a universal dimensional reduction to 2 dimensions, in all dimensions. We conclude by discussing the validity and relevance of our results within the broader context of quantum field theories based on these nonlocal dynamics.

  1. Acute kidney injury in patients with systemic sclerosis participating in hematopoietic cell transplantation trials in the United States.

    Science.gov (United States)

    Hosing, Chitra; Nash, Richard; McSweeney, Peter; Mineishi, Shin; Seibold, James; Griffith, Linda M; Shulman, Howard; Goldmuntz, Ellen; Mayes, Maureen; Parikh, Chirag R; Crofford, Leslie; Keyes-Elstein, Lynette; Furst, Daniel; Steen, Virginia; Sullivan, Keith M

    2011-05-01

    Recipients of hematopoietic cell transplantation may be at risk for developing acute kidney injury (AKI), and this risk may be increased in patients who undergo transplantation for severe systemic sclerosis (SSc) due to underlying scleroderma renal disease. AKI after transplantation can increase treatment-related mortality. To better define these risks, we analyzed 91 patients with SSc who were enrolled in 3 clinical trials in the United States of autologous or allogeneic hematopoietic cell transplantation (HCT). Eleven (12%) of the 91 patients with SSc in these studies (8 undergoing autologous HCT, 1 undergoing allogeneic HCT, 1 pretransplantation, 1 given i.v. cyclophosphamide on a transplantation trial) experienced AKI, of whom 8 required dialysis and/or therapeutic plasma exchange. AKI injury in the 9 HCT recipients developed a median of 35 days (range, 0-90 days) after transplantation. Ten of 11 patients with AKI received angiotensin-converting enzyme inhibitor (ACE-I) therapy. The etiology of AKI was attributed to scleroderma renal crisis in 6 patients (including 2 with normotensive renal crisis), to AKI of uncertain etiology in 2 patients, and to AKI superimposed on scleroderma kidney disease in 3 patients. Eight of the 11 patients died, one each because of progression of SSc, multiorgan failure, gastrointestinal and pulmonary bleeding, pericardial tamponade and pulmonary complications, diffuse alveolar hemorrhage, pulmonary embolism, graft-versus-host disease, and malignancy. Limiting nephrotoxins, cautious use of corticosteroids, renal shielding during total body irradiation, strict control of blood pressure, and aggressive use of ACE-Is may be of importance in preventing renal complications after HCT for SSc.

  2. Grand Unification in Higher Dimensions

    CERN Document Server

    Hall, L J; Hall, Lawrence J.; Nomura, Yasunori

    2003-01-01

    We have recently proposed an alternative picture for the physics at the scale of gauge coupling unification, where the unified symmetry is realized in higher dimensions but is broken locally by a symmetry breaking defect. Gauge coupling unification, the quantum numbers of quarks and leptons and the longevity of the proton arise as phenomena of the symmetrical bulk, while the lightness of the Higgs doublets and the masses of the light quarks and leptons probe the symmetry breaking defect. Moreover, the framework is extremely predictive if the effective higher dimensional theory is valid over a large energy interval up to the scale of strong coupling. Precise agreement with experiments is obtained in the simplest theory --- SU(5) in five dimensions with two Higgs multiplets propagating in the bulk. The weak mixing angle is predicted to be sin^2theta_w = 0.2313 \\pm 0.0004, which fits the data with extraordinary accuracy. The compactification scale and the strong coupling scale are determined to be M_c \\simeq 5 x...

  3. Topological dimension and dynamical systems

    CERN Document Server

    Coornaert, Michel

    2015-01-01

    Translated from the popular French edition, the goal of the book is to provide a self-contained introduction to mean topological dimension, an invariant of dynamical systems introduced in 1999 by Misha Gromov. The book examines how this invariant was successfully used by Elon Lindenstrauss and Benjamin Weiss to answer a long-standing open question about embeddings of minimal dynamical systems into shifts. A large number of revisions and additions have been made to the original text. Chapter 5 contains an entirely new section devoted to the Sorgenfrey line. Two chapters have also been added: Chapter 9 on amenable groups and Chapter 10 on mean topological dimension for continuous actions of countable amenable groups. These new chapters contain material that have never before appeared in textbook form. The chapter on amenable groups is based on Følner’s characterization of amenability and may be read independently from the rest of the book. Although the contents of this book lead directly to several active ar...

  4. Effects of the Scientific Argumentation Based Learning Process on Teaching the Unit of Cell Division and Inheritance to Eighth Grade Students

    Science.gov (United States)

    Balci, Ceyda; Yenice, Nilgun

    2016-01-01

    The aim of this study is to analyse the effects of scientific argumentation based learning process on the eighth grade students' achievement in the unit of "cell division and inheritance". It also deals with the effects of this process on their comprehension about the nature of scientific knowledge, their willingness to take part in…

  5. Convergent synthesis of a tetrasaccharide repeating unit of the O-specific polysaccharide from the cell wall lipopolysaccharide of Azospirillum brasilense strain Sp7

    Directory of Open Access Journals (Sweden)

    Pintu Kumar Mandal

    2014-01-01

    Full Text Available A straightforward convergent synthesis has been carried out for the tetrasaccharide repeating unit of the O-specific cell wall lipopolysaccharide of the strain Sp7 of Azospirillum brasilense. The target tetrasaccharide has been synthesized from suitably protected monosaccharide intermediates in 42% overall yield in seven steps by using a [2 + 2] block glycosylation approach.

  6. Computation of the Madelung constant for hypercubic crystal structures in any dimension

    CERN Document Server

    Mamode, Malik

    2015-01-01

    A new method of computing the Madelung constants for hypercubic crystal structures in any dimension $n\\geq 2$ is given. It is shown for $n\\geq 3$ that the Madelung constant may be obtained in a simple, efficient and unambiguous way as the Hadamard finite part of the integral representation of the potential within the crystal which is divergent at any point charge location. Such a regularization method fails in the bidimensional case due to the logarithmic nature of singularities for the potential. In that case, a specific approach is proposed taking in account the scale invariance of the Poisson equation and the existence of a finite horizon for each point charge in the plane. Since a closed-form exact solution for the 2D electrostatic potential may be derived, one shows that the Madelung constant may be defined via an appropriate limit calculation as the mean value of potential energies of charges composing the unit cell.

  7. Growth of Casting Microcrack and Micropore in Single-crystal Superalloys Analysed by Three-Dimensional Unit Cell

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Finite element (FE) analysis was employed to investigate the casting microcrack and micropore growth in nickel-base single-crystal superalloys DD3. Based on the finite deformation rate-dependent crystallographic constitutive equation, the simulations of casting microcrack and micropore growth in three-dimensional unit cell model were carried out in a range of parameters including stress triaxiality, Lode parameter and type of activated slip systems. The FE results show that the stress triaxiality has profound effects on growth behavior,and the Lode parameter is also important for the casting microcrack and micropore growth. The type of operative slip systems has remarkable effect on casting microcrack and micropore growth, so the life of singlecrystal component is associated with the type of activated slip systems, which is related to Schmid factor and the number of activated slip systems. The growth comparison between microcrack and micropore reveals that when the material is subjected to large deformation, the growth rate of microcrack is faster than that of micropore, i.e. microcrack is more dangerous than micropore; the microcrack is easier to result in brittle fracture than micropore. The stress triaxiality and Lode parameter have strong influence on the growth of microcrack and micropore.

  8. Invasive fungal infection among hematopoietic stem cell transplantation patients with mechanical ventilation in the intensive care unit

    Directory of Open Access Journals (Sweden)

    Hung Chen-Yiu

    2012-02-01

    Full Text Available Abstract Background Invasive fungal infection (IFI is associated with high morbidity and high mortality in hematopoietic stem cell transplantation (HSCT patientsThe purpose of this study was to assess the characteristics and outcomes of HSCT patients with IFIs who are undergoing MV at a single institution in Taiwan. Methods We performed an observational retrospective analysis of IFIs in HSCT patients undergoing mechanical ventilation (MV in an intensive care unit (ICU from the year 2000 to 2009. The characteristics of these HSCT patients and risk factors related to IFIs were evaluated. The status of discharge, length of ICU stay, date of death and cause of death were also recorded. Results There were 326 HSCT patients at the Linkou Chang-Gung Memorial Hospital (Taipei, Taiwan during the study period. Sixty of these patients (18% were transferred to the ICU and placed on mechanical ventilators. A total of 20 of these 60 patients (33% had IFIs. Multivariate analysis indicated that independent risk factors for IFI were admission to an ICU more than 40 days after HSCT, graft versus host disease (GVHD, and high dose corticosteroid (p p = 0.676. Conclusion There was a high incidence of IFIs in HSCT patients requiring MV in the ICU in our study cohort. The independent risk factors for IFI are ICU admission more than 40 days after HSCT, GVHD, and use of high-dose corticosteroid.

  9. Outcome of Recipients of Hematopoietic Stem Cell Transplants Who Require Intensive Care Unit Support: A Single Institution Experience.

    Science.gov (United States)

    Galindo-Becerra, Samantha; Labastida-Mercado, Nancy; Rosales-Padrón, Jaime; García-Chavez, Jessica; Soto-Vega, Elena; Rivadeneyra-Espinoza, Liliana; León-Peña, Andres A; Fernández-Lara, Danitza; Dominguez-Cid, Monica; Anthon-Méndez, Javier; Arizpe-Bravo, Daniel; Ruiz-Delgado, Guillermo J; Ruiz-Argüelles, Guillermo J

    2015-01-01

    Admission to the intensive care unit (ICU) of a patient who has been grafted with hematopoietic stem cells is a serious event, but the role of the ICU in this setting remains controversial. Data were analyzed from patients who underwent autologous or allogeneic bone marrow transplantation at the Centro de Hematología y Medicina Interna de Puebla, México, between May 1993 and October 2014. In total, 339 patients were grafted: 150 autografts and 189 allografts; 68 of the grafted patients (20%) were admitted to the ICU after transplantation: 27% of the allografted and 11% of the autografted patients (p = 0.2). Two of 17 autografted patients (12%) and 5 of 51 allografted patients (10%) survived. All patients who required insertion of an endotracheal tube died, whereas 7 of 11 patients without invasive mechanical ventilation survived (p = 0.001). Only 10% of the grafted patients survived their stay in the ICU; this figure is lower than those reported from other centers and may reflect several facts, varying from the quality of the ICU support to ICU admission criteria to the initial management of all the grafts in an outpatient setting, which could somehow delay the arrival of patients to the hospital. © 2015 S. Karger AG, Basel.

  10. Compact Design of 10 kW Proton Exchange Membrane Fuel Cell Stack Systems with Microcontroller Units

    Directory of Open Access Journals (Sweden)

    Hsiaokang Ma

    2014-04-01

    Full Text Available In this study, fuel, oxidant supply and cooling systems with microcontroller units (MCU are developed in a compact design to fit two 5 kW proton exchange membrane fuel cell (PEMFC stacks. At the initial stage, the testing facility of the system has a large volume (2.0 m × 2.0 m × 1.5 m with a longer pipeline and excessive control sensors for safe testing. After recognizing the performance and stability of stack, the system is redesigned to fit in a limited space (0.4 m × 0.5 m × 0.8 m. Furthermore, the stack performance is studied under different hydrogen recycling modes. Then, two similar 5 kW stacks are directly coupled with diodes to obtain a higher power output and safe operation. The result shows that the efficiency of the 5 kW stack is 43.46% with a purge period of 2 min with hydrogen recycling and that the hydrogen utilization rate µf is 66.31%. In addition, the maximum power output of the twin-coupled module (a power module with two stacks in electrical cascade/parallel arrangement is 9.52 kW.

  11. Phase coexistence calculations via a unit-cell Gibbs ensemble formalism for melts of reversibly bonded block copolymers

    Science.gov (United States)

    Mester, Zoltan; Lynd, Nathaniel; Fredrickson, Glenn

    2013-03-01

    Melts of block copolymer blends can exhibit coexistence between compositionally and morphologically distinct phases. We derived a unit-cell approach for a field theoretic Gibbs ensemble formalism to rapidly map out such coexistence regions. We also developed a canonical ensemble model for the reversible reaction of supramolecular polymers and integrated it into the Gibbs ensemble scheme. This creates a faster method for generating phase diagrams in complex supramolecular systems than the usual grand canonical ensemble method and allows us to specify the system in experimentally accessible volume fractions rather than chemical potentials. The integrated approach is used to calculate phase diagrams for AB diblock copolymers reversibly reacting with B homopolymers to form a new diblocks we term ``ABB.'' For our case, we use a diblock that is sixty percent A monomer and a homopolymer that is the same length as the diblock. In the limits of infinite reaction favorability (large equilibrium constant), the system approaches cases of an ABB diblock-B homopolymer blend when the AB diblock is the limiting reactant and AB diblock-ABB diblock blend when the homopolymer is the limiting reactant. As reaction favorability is decreased, the phase boundaries shift towards higher homopolymer compositions so that sufficient reaction can take place to produce the ABB diblock that has a deciding role stabilizing the observed phases.

  12. Torque and atomic forces for Cartesian tensor atomic multipoles with an application to crystal unit cell optimization.

    Science.gov (United States)

    Elking, Dennis M

    2016-08-15

    New equations for torque and atomic force are derived for use in flexible molecule force fields with atomic multipoles. The expressions are based on Cartesian tensors with arbitrary multipole rank. The standard method for rotating Cartesian tensor multipoles and calculating torque is to first represent the tensor with n indexes and 3(n) redundant components. In this work, new expressions for directly rotating the unique (n + 1)(n + 2)/2 Cartesian tensor multipole components Θpqr are given by introducing Cartesian tensor rotation matrix elements X(R). A polynomial expression and a recursion relation for X(R) are derived. For comparison, the analogous rotation matrix for spherical tensor multipoles are the Wigner functions D(R). The expressions for X(R) are used to derive simple equations for torque and atomic force. The torque and atomic force equations are applied to the geometry optimization of small molecule crystal unit cells. In addition, a discussion of computational efficiency as a function of increasing multipole rank is given for Cartesian tensors. © 2016 Wiley Periodicals, Inc.

  13. Corrective Action Plan for Corrective Action Unit 261: Area 25 Test Cell A Leachfield System, Nevada Test Site, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    T. M. Fitzmaurice

    2000-08-01

    This Corrective Action Plan (CAP) has been prepared for the Corrective Action Unit (CAU)261 Area 25 Test Cell A Leachfield System in accordance with the Federal Facility and Consent Order (Nevada Division of Environmental Protection [NDEP] et al., 1996). This CAP provides the methodology for implementing the approved corrective action alternative as listed in the Corrective Action Decision Document (U.S. Department of Energy, Nevada Operations Office, 1999). Investigation of CAU 261 was conducted from February through May of 1999. There were no Constituents of Concern (COCs) identified at Corrective Action Site (CAS) 25-05-07 Acid Waste Leach Pit (AWLP). COCs identified at CAS 25-05-01 included diesel-range organics and radionuclides. The following closure actions will be implemented under this plan: Because COCs were not found at CAS 25-05-07 AWLP, no action is required; Removal of septage from the septic tank (CAS 25-05-01), the distribution box and the septic tank will be filled with grout; Removal of impacted soils identified near the initial outfall area; and Upon completion of this closure activity and approval of the Closure Report by NDEP, administrative controls, use restrictions, and site postings will be used to prevent intrusive activities at the site.

  14. Novel web-based real-time dashboard to optimize recycling and use of red cell units at a large multi-site transfusion service

    Directory of Open Access Journals (Sweden)

    Christopher Sharpe

    2014-01-01

    Full Text Available Background: Effective blood inventory management reduces outdates of blood products. Multiple strategies have been employed to reduce the rate of red blood cell (RBC unit outdate. We designed an automated real-time web-based dashboard interfaced with our laboratory information system to effectively recycle red cell units. The objective of our approach is to decrease RBC outdate rates within our transfusion service. Methods: The dashboard was deployed in August 2011 and is accessed by a shortcut that was placed on the desktops of all blood transfusion services computers in the Capital District Health Authority region. It was designed to refresh automatically every 10 min. The dashboard provides all vital information on RBC units, and implemented a color coding scheme to indicate an RBC unit′s proximity to expiration. Results: The overall RBC unit outdate rate in the 7 months period following implementation of the dashboard (September 2011-March 2012 was 1.24% (123 units outdated/9763 units received, compared to similar periods in 2010-2011 and 2009-2010: 2.03% (188/9395 and 2.81% (261/9220, respectively. The odds ratio of a RBC unit outdate postdashboard (2011-2012 compared with 2010-2011 was 0.625 (95% confidence interval: 0.497-0.786; P < 0.0001. Conclusion: Our dashboard system is an inexpensive and novel blood inventory management system which was associated with a significant reduction in RBC unit outdate rates at our institution over a period of 7 months. This system, or components of it, could be a useful addition to existing RBC management systems at other institutions.

  15. Duality Symmetry and Soldering in Different Dimensions

    CERN Document Server

    Banerjee, R

    1997-01-01

    We develop a systematic method of obtaining duality symmetric actions in different dimensions. This technique is applied for the quantum mechanical harmonic oscillator, the scalar field theory in two dimensions and the Maxwell theory in four dimensions. In all cases there are two such distinct actions. Furthermore, by soldering these distinct actions in any dimension a master action is obtained which is duality invariant under a much bigger set of symmetries than is usually envisaged. The concept of swapping duality is introduced and its implications are discussed. The effects of coupling to gravity are also elaborated. Finally, the extension of the analysis for arbitrary dimensions is indicated.

  16. Dynamic microenvironments: the fourth dimension.

    Science.gov (United States)

    Tibbitt, Mark W; Anseth, Kristi S

    2012-11-14

    The extracellular space, or cell microenvironment, choreographs cell behavior through myriad controlled signals, and aberrant cues can result in dysfunction and disease. For functional studies of human cell biology or expansion and delivery of cells for therapeutic purposes, scientists must decipher this intricate map of microenvironment biology and develop ways to mimic these functions in vitro. In this Perspective, we describe technologies for four-dimensional (4D) biology: cell-laden matrices engineered to recapitulate tissue and organ function in 3D space and over time.

  17. Dimension variation prediction and control for composites

    Science.gov (United States)

    Dong, Chensong

    This dissertation presents a systematic study on the dimension variation prediction and control for polymer matrix fiber reinforced composites. A dimension variation model was developed for process simulation based on thermal stress analysis and finite element analysis (FEA). This model was validated against the experimental data, the analytical solutions and the data from literature. Using the FEA-based dimension variation model, the deformations of typical composite structures were studied and the regression-based dimension variation model was developed. The regression-based dimension variation model can significantly reduce computation time and provide a quick design guide for composite products with reduced dimension variations. By introducing the material modification coefficient, this comprehensive model can handle various fiber/resin types and stacking sequences. It eliminates the complicated, time-consuming finite element meshing and material parameter defining process. The deformation compensation through tooling design was investigated using the FEA-based and the regression-based dimension variation models. The structural tree method (STM) was developed to compute the assembly deformation from the deformations of individual components, as well as the deformation of general shape composite components. The STM enables rapid dimension variation analysis/synthesis for complex composite assemblies with the regression-based dimension variation model. Using the STM and the regression-based dimension variation model, design optimization and tolerance analysis/synthesis were conducted. The exploring work presented in this research provides a foundation to develop practical and proactive dimension control techniques for composite products.

  18. Psychophysical dimensions of tactile perception of textures.

    Science.gov (United States)

    Okamoto, Shogo; Nagano, Hikaru; Yamada, Yoji

    2013-01-01

    This paper reviews studies on the tactile dimensionality of physical properties of materials in order to determine a common structure for these dimensions. Based on the commonality found in a number of studies and known mechanisms for the perception of physical properties of textures, we conclude that tactile textures are composed of three prominent psychophysical dimensions that are perceived as roughness/smoothness, hardness/softness, and coldness/warmness. The roughness dimension may be divided into two dimensions: macro and fine roughness. Furthermore, it is reasonable to consider that a friction dimension that is related to the perception of moistness/dryness and stickiness/slipperiness exists. Thus, the five potential dimensions of tactile perception are macro and fine roughness, warmness/coldness, hardness/softness, and friction (moistness/dryness, stickiness/slipperiness). We also summarize methods such as psychological experiments and mathematical approaches for structuring tactile dimensions and their limitations.

  19. Silicon Nanowire/Polymer Hybrid Solar Cell-Supercapacitor: A Self-Charging Power Unit with a Total Efficiency of 10.5.

    Science.gov (United States)

    Liu, Ruiyuan; Wang, Jie; Sun, Teng; Wang, Mingjun; Wu, Changsheng; Zou, Haiyang; Song, Tao; Zhang, Xiaohong; Lee, Shuit-Tong; Wang, Zhong Lin; Sun, Baoquan

    2017-07-12

    An integrated self-charging power unit, combining a hybrid silicon nanowire/polymer heterojunction solar cell with a polypyrrole-based supercapacitor, has been demonstrated to simultaneously harvest solar energy and store it. By efficiency enhancement of the hybrid nanowire solar cells and a dual-functional titanium film serving as conjunct electrode of the solar cell and supercapacitor, the integrated system is able to yield a total photoelectric conversion to storage efficiency of 10.5%, which is the record value in all the integrated solar energy conversion and storage system. This system may not only serve as a buffer that diminishes the solar power fluctuations from light intensity, but also pave its way toward cost-effective high efficiency self-charging power unit. Finally, an integrated device based on ultrathin Si substrate is demonstrated to expand its feasibility and potential application in flexible energy conversion and storage devices.

  20. Ammonia concentration and bacterial evaluation of feline whole blood and packed red blood cell units stored for transfusion

    Directory of Open Access Journals (Sweden)

    Eva Spada

    2014-10-01

    Full Text Available Ammonia concentrations increase in human, canine and equine WB and PRBC units during storage. The aim of this study was to determine the effect of storage on ammonia concentration in feline WB and PRBC units stored in a veterinary blood bank and to evaluate possible correlations with bacterial contamination. Ammonia concentration was evaluated in 15 WB units and 2 PRBC units on day 1 and at the end of storage after 35 and 42 days, respectively. In an additional 5 WB units and 4 PRBC units ammonia concentrations were determined daily until the day the normal reference range was exceeded and then weekly to the end of storage. All units were evaluated for bacterial contamination. Ammonia increased markedly during storage as a linear function over time. On the 35th and 42th day of storage at 4±2°C mean±SD ammonia concentration reached 909±158 µg/dl and 1058±212 µg/dl in WB and PRBC units, respectively. Bacterial culture was negative in all units. High ammonia concentrations in stored WB and PRBC units could result in toxicity, particularly in feline recipients with liver failure, portosystemic shunts or those receiving large transfusion volumes. Clinical in vivo studies evaluating the effects on recipients should be performed.

  1. Trading in Risk Dimensions (TRD)

    CERN Document Server

    Ingber, Lester

    2007-01-01

    Previous work, mostly published, developed two-shell recursive trading systems. An inner-shell of Canonical Momenta Indicators (CMI) is adaptively fit to incoming market data. A parameterized trading-rule outer-shell uses the global optimization code Adaptive Simulated Annealing (ASA) to fit the trading system to historical data. A simple fitting algorithm, usually not requiring ASA, is used for the inner-shell fit. An additional risk-management middle-shell has been added to create a three-shell recursive optimization/sampling/fitting algorithm. Portfolio-level distributions of copula-transformed multivariate distributions (with constituent markets possessing different marginal distributions in returns space) are generated by Monte Carlo samplings. ASA is used to importance-sample weightings of these markets. The core code, Trading in Risk Dimensions (TRD), processes Training and Testing trading systems on historical data, and consistently interacts with RealTime trading platforms at minute resolutions, but ...

  2. Anisotropic inflation from extra dimensions

    CERN Document Server

    Litterio, M; Amendola, L; Dyrek, A; Litterio, Marco; Amendola, Luca; Dyrek, Andrzej

    1995-01-01

    Vacuum multidimensional cosmological models with internal spaces being compact n-dimensional Lie group manifolds are considered. Products of 3-spheres and SU(3) manifold (a novelty in cosmology) are studied. It turns out that the dynamical evolution of the internal space drives an accelerated expansion of the external world (power law inflation). This generic solution (attractor in a phase space) is determined by the Lie group space without any fine tuning or arbitrary inflaton potentials. Matter in the four dimensions appears in the form of a number of scalar fields representing anisotropic scale factors for the internal space. Along the attractor solution the volume of the internal space grows logarithmically in time. This simple and natural model should be completed by mechanisms terminating the inflationary evolution and transforming the geometric scalar fields into ordinary particles.

  3. Anomalous dimension in semiclassical gravity

    CERN Document Server

    Alesci, Emanuele

    2011-01-01

    The description of the phase space of relativistic particles coupled to three-dimensional Einstein gravity requires momenta which are coordinates on a group manifold rather than on ordinary Minkowski space. The corresponding field theory turns out to be a non-commutative field theory on configuration space and a group field theory on momentum space. Using basic non-commutative Fourier transform tools we introduce the notion of non-commutative heat-kernel associated with the Laplacian on the non-commutative configuration space. We show that the spectral dimension associated to the non-commutative heat kernel varies with the scale reaching a non-integer value smaller than three for Planckian diffusion scales.

  4. Supergravity Fluxbranes in Various Dimensions

    CERN Document Server

    Chen, C M; Saffin, P M; Chen, Chiang-Mei; Gal'tsov, Dmitri V.; Saffin, Paul M.

    2002-01-01

    We investigate fluxbrane solutions to the Einstein-antisymmetric form-dilaton theory in arbitrary space-time dimensions for a transverse space of cylindrical topology $S^k\\times R^n$, corresponding to smeared and unsmeared solutions. A master equation for a single metric function is derived. This is a non-linear second-order ordinary differential equation admitting an analytic solution, singular at the origin, which serves as an attractor for globally regular solutions, whose existence is demonstrated numerically. For all fluxbranes of different levels of smearing the metric function diverges at infinity as the same power of the radial coordinate except for the maximally smeared case, where a global solution is known in closed form and can be obtained algebraically using U-duality. The particular cases of F6 and F3 fluxbranes in D=11 supergravity and fluxbranes in IIA, IIB supergravities are discussed.

  5. Robust large dimension terahertz cloaking

    CERN Document Server

    Liang, Dachuan; Han, Jiaguang; Yang, Yuanmu; Zhang, Shuang; Zhang, Weili

    2011-01-01

    Invisibility cloaking not only catches the human imagination, but also promises fascinating applications in optics and photonics. By manipulating electromagnetic waves with metamaterials, researchers have been able to realize electromagnetic cloaking in the microwave, terahertz and optical regimes. Nevertheless, the complex design and fabrication process, narrow bandwidth, and high intrinsic losses in the metamaterial-based cloaks have imposed intractable limitations on their realistic applications. Seeking new approaches to overcome these perceived disadvantages is in progress. Here by using uniform sapphire crystal, we demonstrate the first homogenous invisibility cloak functioning at terahertz frequencies. The terahertz invisibility device features a large concealed volume, low loss, and broad bandwidth. In particular, it is capable of hiding objects with a dimension nearly an order of magnitude larger than that of its lithographic counterpart, but without involving complex and time-consuming cleanroom pro...

  6. Psychological dimensions of Energy Conservation

    Directory of Open Access Journals (Sweden)

    Tonello, Graciela

    2012-12-01

    Full Text Available One of the most serious current environmental problems is the depletion of non renewable natural resources. The vast majority of our daily actions involve the consumption of energy and they increase the problem. Environmental psychology studies the psychological motivations that determine pro-ecological behaviour. In this context the aim of this review was to determine which psychological models and variables are better descriptors of residential energy conservation, comparing the predictive power of different models related to behaviour, residential consumption as well as to the acceptability of energy policies. Results suggest that energy saving is mainly linked to altruistic motivations, followed by egoistic reasons and in a minor way to environmental concerns. People would act according to these dimensions when contextual conditions are perceived as appropriate.

  7. [Temporal dimensions of suicide: hypothesis].

    Science.gov (United States)

    Carbonell-Camós, Eliseu

    2008-01-01

    In this article, the author examines the temporal dimensions of suicide by taking into account the multiple existing approaches-circadian physiology, psychiatric or sociological epidemiology of suicide-however promoting a socio-anthropological perspective. From this perspective, suicide is examined as a social phenomenon inscribed in time. By beginning with a concern that is characteristic of anthropology of time, knowingly the relation between time of nature and time of society, the author addresses a key issue of the study of suicide already elaborated by Durkheim, in the relation between change that is a basic expression of the passage of time and suicide. After presenting different scientific contributions on the subject, the author proposes an hypothesis allowing integration of the influence of time related to natural phenomenon (cosmobiological rhythms) and the relation of time to social phenomenon (politico-economic rhythms) in relation with suicide and this, according to Gabennesch's theory of "failed promises."

  8. Numerical relativity in higher dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Zilhao, Miguel; Herdeiro, Carlos [Departamento de Fisica e Centro de Fisica do Porto, Faculdade de Ciencias da Universidade do Porto, Rua do Campo Alegre 687, 4169-007 Porto (Portugal); Witek, Helvi; Cardoso, Vitor; Nerozzi, Andrea [Centro Multidisciplinar de Astrofisica - CENTRA, Departamento de Fisica, Instituto Superior Tecnico - IST, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Sperhake, Ulrich [California Institute of Technology, Pasadena, CA 91109 (United States); Gualtieri, Leonardo, E-mail: mzilhao@fc.up.p, E-mail: helvi.witek@ist.utl.p, E-mail: vitor.cardoso@ist.utl.p, E-mail: Leonardo.Gualtieri@roma1.infn.i, E-mail: crherdei@fc.up.p, E-mail: andrea.nerozzi@ist.utl.p, E-mail: sperhake@tapir.caltech.ed [Dipartimento di Fisica, Universita di Roma ' Sapienza' and Sezione, INFN Roma1, P.A. Moro 5, 00185, Roma (Italy)

    2010-05-01

    We give a status report on our project targeted at performing numerical simulations of a head-on collision of non-spinning black holes in higher dimensional non-compact space-times. These simulations should help us understand black objects in higher dimensions and their stability properties. They are also relevant for the problem of black hole formation and evaporation in particle accelerators and cosmic rays. We use the symmetries of the system to reduce the problem to an effective 3+1 problem, allowing the use of existing numerical codes. As a simple application of the formalism, we present the results for the evolution of a five dimensional single black hole space-time.

  9. Accessible solitons of fractional dimension

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, Wei-Ping, E-mail: zhongwp6@126.com [Department of Electronic and Information Engineering, Shunde Polytechnic, Guangdong Province, Shunde 528300 (China); Texas A& M University at Qatar, P.O. Box 23874, Doha (Qatar); Belić, Milivoj [Texas A& M University at Qatar, P.O. Box 23874, Doha (Qatar); Zhang, Yiqi [Key Laboratory for Physical Electronics and Devices of the Ministry of Education & Shaanxi Key Lab of Information Photonic Technique, Xi’an Jiaotong University, Xi’an 710049 (China)

    2016-05-15

    We demonstrate that accessible solitons described by an extended Schrödinger equation with the Laplacian of fractional dimension can exist in strongly nonlocal nonlinear media. The soliton solutions of the model are constructed by two special functions, the associated Legendre polynomials and the Laguerre polynomials in the fraction-dimensional space. Our results show that these fractional accessible solitons form a soliton family which includes crescent solitons, and asymmetric single-layer and multi-layer necklace solitons. -- Highlights: •Analytic solutions of a fractional Schrödinger equation are obtained. •The solutions are produced by means of self-similar method applied to the fractional Schrödinger equation with parabolic potential. •The fractional accessible solitons form crescent, asymmetric single-layer and multilayer necklace profiles. •The model applies to the propagation of optical pulses in strongly nonlocal nonlinear media.

  10. The spatial dimensions of innovation

    DEFF Research Database (Denmark)

    Lorentzen, Anne

    2005-01-01

    The paper discusseses the spatial dimensions of innovation in Polish manufacturing companies. The conceptual framework of the paper is an understanding of social networks as a potential resource of the company, whether they are internal or external. Whether the company benefits from the potential...... of the networks (local, national international). Finally how can the network strategy of the companies be explained? What factors seem to determine an active involvement of networks and what other factors seem to explain a self-sufficient strategy of innovation? What is the spatial extension of the networks......, and are there systematic differences in the spatial extension of the networks? Does the transitional situation of the Polish society seem to favour certain strategies of innovation?...

  11. Human dimension of strategic partnerships

    Directory of Open Access Journals (Sweden)

    Petković Mirjana M.

    2004-01-01

    Full Text Available This paper aims to point to the widespread practice of neglecting behavioral aspects of different forms of fusions and integrations of enterprises that have emerged in the process of privatization through strategic partnerships with foreign companies among Serbian enterprises. The initial hypothesis in this paper is that the process of privatization, restructuring and transformation in Serbian enterprises cannot be completely successful and equally advantageous for all the subjects involved if there is no concern for human dimension of these processes. Without this concern there is a possibility for behavioral problems to arise, and the only way to resolve them is through post festum respecting and introducing elements that should never have been neglected in the first place. This paper refers to the phenomenon of collision of cultures and the ways of resolving it while forming strategic partnerships.

  12. Serre dimension of monoid algebras

    Indian Academy of Sciences (India)

    MANOJ K KESHARI; HUSNEY PARVEZ SARWAR

    2017-04-01

    Let $R$ be a commutative Noetherian ring of dimension $d$, $M$ a commutative cancellative torsion-free monoid of rank $r$ and $P$ a finitely generated projective $R[M]$-module of rank $t$ . Assume $M$ is $\\Phi$-simplicial seminormal. If $M \\in C(\\Phi)$, then Serre dim $R[M] \\leq d$. If $r \\leq 3$, then Serre dim $R[int(M)] \\leq d$. If $M \\subset \\mathbb{Z}^2_+$ is a normal monoid of rank 2, then Serre dim $R[M] \\leq d$. Assume $M$ is $c$-divisible, $d$ = 1 and $t \\geq 3$. Then$P \\cong \\wedge^{t} P \\oplus R[M]^{t−1}$. Assume $R$ is a uni-branched affine algebra over an algebraically closed field and $d$ = 1. Then $P \\cong \\wedge^{t} P \\oplus R[M]^{t−1}$.

  13. As dimensões do cuidado em uma unidade de queimados: um estudo etnográfico Las dimensiones del cuidado en una unidad de quemados: un estudio etnográfico The dimensions of the care in a burn unit: an ethnographic study

    Directory of Open Access Journals (Sweden)

    Elaine Carvalho Fernandes Braga Costa

    2003-09-01

    Full Text Available Este estudo etnográfico teve como objetivo compreender as perspectivas culturais dos profissionais de enfermagem que atuam em uma Unidade de Queimados sobre cuidado do paciente vítima de queimaduras. Os dados foram coletados por meio de observação e entrevistas e interpretados de acordo com a perspectiva de Bourdieu, que utiliza os conceitos de habitus e campo para compreender os comportamentos que expressam o que está interiorizado pelas pessoas que fazem parte de um grupo social. Para desempenhar o cuidado, os profissionais agem de acordo com formas que já interiorizaram, como sofrer junto, ser firme e, ao mesmo tempo, atencioso e carinhoso.Este estudio etnográfico tuvo como objetivo comprender las perspectivas culturales de profesionales de enfermería, que actúan en una Unidad de Quemados, sobre el cuidado del cliente que sufrió quemaduras. Los datos fueron obtenidos por medio de observación y entrevistas e interpretados de acuerdo con la perspectiva de Bourdieu, que utiliza los conceptos de habitus y campo para comprender los comportamientos que expresan lo interiorizado por personas que hacen parte de un grupo social. Para desempeñar el cuidado, los profesionales actúan de acuerdo a formas ya interiorizadas tales como: sufrir junto, ser firme y al mismo tiempo atento y cariñoso.This aim of this ethnographic study is to understand a nursing staff's cultural perspectives throughout the care of a burned client in a burn unit. Data were collected through observation and interviews and interpreted in accordance with Bourdieu's perspective, that uses the habitus concepts and field to understand the behaviors that express what is internalized by people that belong to a social group. To carry out these dimensions of care, the professionals act in agreement with the forms that already internalized, and they expressed in their depositions: to suffer together, to act firmly, and at the same time, to be kind and affectionate.

  14. Grand unification in higher dimensions

    Science.gov (United States)

    Hall, Lawrence J.; Nomura, Yasunori

    2003-07-01

    We have recently proposed an alternative picture for the physics at the scale of gauge coupling unification, where the unified symmetry is realized in higher dimensions but is broken locally by a symmetry breaking defect. Gauge coupling unification, the quantum numbers of quarks and leptons and the longevity of the proton arise as phenomena of the symmetrical bulk, while the lightness of the Higgs doublets and the masses of the light quarks and leptons probe the symmetry breaking defect. Moreover, the framework is extremely predictive if the effective higher dimensional theory is valid over a large energy interval up to the scale of strong coupling. Precise agreement with experiments is obtained in the simplest theory— SU(5) in five dimensions with two Higgs multiplets propagating in the bulk. The weak mixing angle is predicted to be sin 2θw=0.2313±0.0004, which fits the data with extraordinary accuracy. The compactification scale and the strong coupling scale are determined to be M c≃5×10 14 GeV and M s≃1×10 17 GeV, respectively. Proton decay with a lifetime of order 10 34 years is expected with a variety of final states such as e+π0, and several aspects of flavor, including large neutrino mixing angles, are understood by the geometrical locations of the matter fields. When combined with a particular supersymmetry breaking mechanism, the theory predicts large lepton flavor violating μ→ e and τ→ μ transitions, with all superpartner masses determined by only two free parameters. The predicted value of the bottom quark mass from Yukawa unification agrees well with the data. This paper is mainly a review of the work presented in hep-ph/0103125, hep-ph/0111068, and hep-ph/0205067 [1-3].

  15. Parvovirus B19 promoter at map unit 6 confers autonomous replication competence and erythroid specificity to adeno-associated virus 2 in primary human hematopoietic progenitor cells.

    Science.gov (United States)

    Wang, X S; Yoder, M C; Zhou, S Z; Srivastava, A

    1995-01-01

    The pathogenic human parvovirus B19 is an autonomously replicating virus with a remarkable tropism for human erythroid progenitor cells. Although the target cell specificity for B19 infection has been suggested to be mediated by the erythrocyte P-antigen receptor (globoside), a number of nonerythroid cells that express this receptor are nonpermissive for B19 replication. To directly test the role of expression from the B19 promoter at map unit 6 (B19p6) in the erythroid cell specificity of B19, we constructed a recombinant adeno-associated virus 2 (AAV), in which the authentic AAV promoter at map unit 5 (AAVp5) was replaced by the B19p6 promoter. Although the wild-type (wt) AAV requires a helper virus for its optimal replication, we hypothesized that inserting the B19p6 promoter in a recombinant AAV would permit autonomous viral replication, but only in erythroid progenitor cells. In this report, we provide evidence that the B19p6 promoter is necessary and sufficient to impart autonomous replication competence and erythroid specificity to AAV in primary human hematopoietic progenitor cells. Thus, expression from the B19p6 promoter plays an important role in post-P-antigen receptor erythroid-cell specificity of parvovirus B19. The AAV-B19 hybrid vector system may also prove to be useful in potential gene therapy of human hemoglobinopathies. Images Fig. 2 Fig. 3 Fig. 4 PMID:8618912

  16. Quantum Physics in One Dimension

    Energy Technology Data Exchange (ETDEWEB)

    Logan, David [University of Oxford (United Kingdom)

    2004-05-14

    To a casual ostrich the world of quantum physics in one dimension may sound a little one-dimensional, suitable perhaps for those with an unhealthy obsession for the esoteric. Nothing of course could be further from the truth. The field is remarkably rich and broad, and for more than fifty years has thrown up innumerable challenges. Theorists, realising that the role of interactions in 1D is special and that well known paradigms of higher dimensions (Fermi liquid theory for example) no longer apply, took up the challenge of developing new concepts and techniques to understand the undoubted peculiarities of one-dimensional systems. And experimentalists have succeeded in turning pipe dreams into reality, producing an impressive and ever increasing array of experimental realizations of 1D systems, from the molecular to the mesoscopic - spin and ladder compounds, organic superconductors, carbon nanotubes, quantum wires, Josephson junction arrays and so on. Many books on the theory of one-dimensional systems are however written by experts for experts, and tend as such to leave the non-specialist a touch bewildered. This is understandable on both fronts, for the underlying theoretical techniques are unquestionably sophisticated and not usually part of standard courses in many-body theory. A brave author it is then who aims to produce a well rounded, if necessarily partial, overview of quantum physics in one dimension, accessible to a beginner yet taking them to the edge of current research, and providing en route a thorough grounding in the fundamental ideas, basic methods and essential phenomenology of the field. It is of course the brave who succeed in this world, and Thierry Giamarchi does just that with this excellent book, written by an expert for the uninitiated. Aimed in particular at graduate students in theoretical condensed matter physics, and assuming little theoretical background on the part of the reader (well just a little), Giamarchi writes in a

  17. Fractal dimensions of flocs between clay particles and HAB organisms

    Institute of Scientific and Technical Information of China (English)

    WANG Hongliang; YU Zhiming; CAO Xihua; SONG Xiuxian

    2011-01-01

    The impact of harmful algal blooms (HABs) on public health and related economics have been increasing in many coastal regions of the world. Sedimentation of algal cells through flocculation with clay particles is a promising strategy for controlling HABs. Previous studies found that removal efficiency (RE) was influenced by many factors, including clay type and concentration, algal growth stage,and physiological aspects of HAB cells. To estimate the effect of morphological characteristics of the aggregates on HAB cell removal, fractal dimensions were measured and the RE of three species of HAB organism, Heterosigma akashiwo, Alexandrium tamarense, and Skeletonema costatum, by original clay and modified clay, was determined. For all HAB species, the modified clay had a higher RE than original clay.For the original clay, the two-dimensional fractal dimension (D2) was 1.92 and three-dimensional fractal dimension (D3) 2.81, while for the modified clay, D2 was 1.84 and D3 was 2.50. The addition of polyaluminum chloride (PACI) lead to a decrease of the repulsive barrier between clay particles, and resulted in lower D2 and D3. Due to the decrease of D3, and the increase of the effective sticking coefficient,the flocculation rate between modified clay particles and HAB organisms increased, and thus resulted in a high RE. The fractal dimensions of flocs differed in HAB species with different cell morphologies. For example, Alexandrium tamarense cells are ellipsoidal, and the D3 and D2 of flocs were the highest, while for Skeletonema costatum, which has filamentous cells, the D3 and D2 of flocs were the lowest.

  18. Effects of Leukoreduction and Storage on Erythrocyte Phosphatidylserine Expression and Eicosanoid Concentrations in Units of Canine Packed Red Blood Cells

    National Research Council Canada - National Science Library

    Muro, S.M; Lee, J.H; Stokes, J.V; Ross, M.K; Archer, T.M; Wills, R.W; Mackin, A.J; Thomason, J.M

    2017-01-01

    ...) expression and eicosanoid concentrations. Hypothesis/Objectives To determine the effects of leukoreduction on erythrocyte PS expression and eicosanoid concentrations in stored units of canine pRBCs...

  19. The external dimension of the Spanish transition

    Directory of Open Access Journals (Sweden)

    Charles T. Powell

    1993-07-01

    Full Text Available The author intends to go beyond the unanimous opinion that the processes of political transition must be explained, almost exclusively, in terms of national forces and calculations. In the case of the Spanish transition he intends to demonstrate how thestrategies of the national actors (crown, government and parties were moulded largely by the pressure of regulations and structures drawn up outside its frontiers. Firstly, by the United States’ discreet support (always putting forward first her strategic interests of the political evolution whilst it did not put in danger the Spanish contribution to the western defensive system (while the USSR hardly played any role. The Spanish transition did not offer a threat to the alliance system from the beginning and with which the result was practically guaranteed. The European governments for their part, worried least about security and more about the political dimension pressurizing the regime and supporting the leaders of the democratic opposition more and more. The European institutions, withtheir veto, ended up legitimizing the Spanish process of democratization while the different Internationals came together and helped their coreligionists in Spain. Their political and diplomatic pressure were complemented, with the paradigm in the case of PSOE, with the contribution of means and resources by the political foundations, largely German, whose highly visible participation did not lessen the credibiity of those it protected.

  20. La dimension diachronique des textes beckettiens

    Directory of Open Access Journals (Sweden)

    Carla Taban

    2007-07-01

    Full Text Available La présente discussion se propose de montrer que les aspects diachroniques du français et de l’anglais – entendues restrictivement comme évolutions sémantiques des lexèmes des deux idiomes et non pas comme évolutions syntaxiques ou phonétiques de ceux-ci – opèrent dans les textes de Beckett en tant que modalités po(ïétiques de différenciation de sens. Autrement dit, la manière dont les unités lexicales sont inscrites dans leurs environnements intra-textuel (d’un texte donné et intra-inter-textuel (d’une paire bilingue de textes correspondants permet, voire requiert de les actualiser simultanément avec plusieurs significations, dont certaines sont originaires ou historiques. La dimension diachronique dans les deux langues offre ainsi à Beckett un outil d’accroissement du potentiel signifiant de ses textes.

  1. Scaling and universality in two dimensions

    DEFF Research Database (Denmark)

    Bellotti, Filipe Furlan; Frederico, T.; Yamashita, M. T.

    2011-01-01

    The momentum space zero-range model is used to investigate universal properties of three interacting particles confined to two dimensions. The pertinent equations are first formulated for a system of two identical and one distinct particle and the two different two-body subsystems are characterized...... by two-body energies and masses. The three-body energy in units of one of the two-body energies is a universal function of the other two-body energy and the mass ratio. We derive convenient analytical formulae for calculations of the three-body energy as a function of these two independent parameters...... and exhibit the results as universal curves. In particular, we show that the three-body system can have any number of stable bound states. When the mass ratio of the distinct to identical particles is greater than 0.22, we find that at most two stable bound states exist, while for two heavy and one light mass...

  2. Sensitization of prostate cancer cell lines to 5-fluorocytosine induced by a replication incompetent adenoviral vector carrying a cytosine deaminase transcription unit

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    AIM: To investigate the efficiency of cytosine deaminase adenoviral/5-fluorocytosine system on prostate cancer cell lines. METHODS: Cell culture, infectivity test and sensitivity test, observing the bystander effect and animal model experiment were carried out. RESULTS: All the established prostate cancer cell lines were eventually infectable, but ratio of vector/cell and time of exposed at which infection occurs was dependent on the cell lines. The expression of transfered cytosine deaminase gene peaked at different days, but persisted beyond 11 days. The prostate cell lines were sensitized to the 5-fluorocytosine by infection with the cytosine deaminase gene adenoviral vector, and only 5% of the LNCap and 10% of the RM-1 cells infected were required for 100% cell death. In the animal model, there was significant eradiation of tumor growth at the ratio of 400 vector particles/cell and with the systematic treatment of 5-fluorocytosine. CONCLUSION: The adenoviral vector carrying a cytosine deaminase transcription unit can sensitize the prostate cancer cell lines to 5-fluorocytosine, and the system can significantly inhibit the growth of prostatic tumor in mice.

  3. CKbeta8-1 alters expression of cyclin E in colony forming units-granulocyte macrophage (CFU-GM) lineage from human cord blood CD34+ cells.

    Science.gov (United States)

    Noh, Eui Kyu; Ra, Jae Sun; Lee, Seong Ae; Kwon, Byoung S; Han, In Seob

    2005-12-31

    A C6 beta-chemokine, CKbeta8-1, suppressed the colony formation of CD34+ cells of human cord blood (CB). Molecular mechanisms involved in CKbeta8-1-medicated suppression of colony formation of CD34+ cells are not known. To address this issue, the level of various G1/S cell cycle regulating proteins in CKbeta8-1-treated CD34+ cells were compared with those in untreated CD34+ cells. CKbeta8-1 did not significantly alter the expression of the G1/S cycle regulation proteins (cyclin D1, D3, and E), CDK inhibitor (p27and Rb), and other cell proliferation regulation protein (p53) in CB CD34+ cells. Here we describe an in vitro system in which CB CD34+ cells were committed to a multipotent progenitor lineage of colony forming units-granulocyte/macrophage (CFU-GM) by a simple combination of recombinant human (rh) GM-CSF and rhIL-3. In this culture system, we found that cyclin E protein appeared later and disappeared faster in the CKbeta8-1-treated cells than in the control cells during CFU-GM lineage development. These findings suggested that cyclin E may play a role in suppressing the colony formation of CFU-GM by CKbeta8-1.

  4. Compreendendo as dimensões de cuidado em uma unidade de emergência hospitalar Entendiendo las dimensiones de la atención en una unidad de emergencia hospittalária Understanding care dimensions in an emergency hospital unit

    Directory of Open Access Journals (Sweden)

    Maria Aparecida Baggio

    2008-10-01

    established in daily nursing work. Nineteen subjects were interviewed in an emergency hospital unit in Santa Catarina, Brazil. The data was submitted to content analysis and interpreted according to complex thought. The care dimensions, presented in six categories, mobilize and articulate the multiple human competencies and techniques of/by caring beings in the comprehension of the nursing care process, from the perspective of those who receive care, including rethinking nursing practice itself and the multiple conditions of the environment as a space for care.

  5. Cryopreserved CD34(+) Cell Dose, but Not Total Nucleated Cell Dose, Influences Hematopoietic Recovery and Extensive Chronic Graft-versus-Host Disease after Single-Unit Cord Blood Transplantation in Adult Patients.

    Science.gov (United States)

    Konuma, Takaaki; Kato, Seiko; Oiwa-Monna, Maki; Tanoue, Susumu; Ogawa, Miho; Isobe, Masamichi; Tojo, Arinobu; Takahashi, Satoshi

    2017-07-01

    Low cryopreserved total nucleated cell (TNC) dose in a cord blood (CB) unit has been shown to be associated with engraftment failure and mortality after single-unit cord blood transplantation (CBT) in adults. Although CB banks offer specific characteristics of cryopreserved cell dose, such as TNC, CD34(+) cells, and colony-forming unit for granulocyte/macrophage (CFU-GM), the impact of each cell dose on engraftment and outcomes after single-unit CBT in adults remains unclear. We retrospectively analyzed the results of 306 CBTs for 261 adult patients in our institution between 1998 and 2016. The median age was 43 years (range, 16 to 68), the median actual body weight (ABW) was 56.2 kg (range, 36.2 to 104.0), the median ideal body weight (IBW) was 62.3 kg (range, 39.7 to 81.3), the median TNC dose was 2.46 × 10(7)/ABW kg (range, 1.07 to 5.69), the median CD34(+) cell dose was .91 × 10(5)/ABW kg (range, .15 to 7.75), and the median CFU-GM dose was 24.46 × 10(3)/ABW kg (range, .04 to 121.81). Among patients who achieved engraftment, the speed of neutrophil, platelet, and red blood cell engraftment significantly correlated with CD34(+) cell dose, but not with TNC and CFU-GM dose, based on both ABW and IBW. In multivariate analysis, the incidence of extensive chronic graft-versus-host disease (GVHD) was significantly higher in patients receiving the highest CD34(+) cell dose, based on both ABW and IBW. Nevertheless, no cell dose was associated with survival, transplantation-related mortality, and relapse. In conclusion, cryopreserved CD34(+) cell dose was the best predictor for hematopoietic recovery and extensive chronic GVHD after CBT. The cryopreserved CD34(+) cell dose should be used for unit selection criteria in single-unit CBT for adults. Copyright © 2017 The American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

  6. Dimensionamento do pessoal de enfermagem das unidades de internação do Hospital São Paulo Dimensionamiento del personal de enfermería de las unidades de internación del Hospital São Paulo Nursing staff dimensioning in the hospitalization units of the Hospital São Paulo

    Directory of Open Access Journals (Sweden)

    Mari Sahamura Matsushita

    2005-03-01

    .8%, seguidos por los cuidados intermediarios (27.5%, cuidados de alta dependencia (22.0%, cuidados intensivos (12% y cuidados seme-intensivos (7.6%. El tiempo de asistencia de enfermería destinado a los pacientes clasificados fue mayor para los cuidados intensivos (30.9%, seguidos por los de alta dependencia (21.8%, intermediarios (21.2%, mínimos (15.3% y seme-intensivos (10.7%. Cerca de 50.0% de las ausencias no previstas de las enfermeras fueron referentes a las licencias de maternidad a las de los técnicos / auxiliares de enfermería fueron homogéneas entre faltas, licencias médicas, licencias de maternidad y otras. La comparación entre los cuadros de personal de enfermería existente en el Hospital São Paulo y lo calculado según el modelo de Gaidzinski demostró carencia de 76 enfermeras y superávit de 97 técnicos / auxiliares de enfermería.This descriptive study was carried out at the hospital São Paulo aiming nursing staff dimension of the hospitalization units of this Institution. Data collect was performed in 2002, in the 40 hospitalization units in which patient’s classification and non anticipated absences of the nursing staff of the previous year were studied, applying the staff dimensioning calculation proposed by Gaidzinski(1. The main conclusions were regarding levels of complexity of the nursing care, the hospitalized patients demanded minimum care of nursing (30.8% followed by intermediary care (27.5%, high dependence care (22.0%, intensive care (12% and semi-intensive care (7.6%. Time of nursing assistance for the classified patients was greater for intensive care (30.9% followed by high dependence (21.8%, intermediary (21.2%, minimum (15.3% and semi-intensive (10.7%. Almost 50.0% of the non-anticipated absences were due to maternity permissions and those of nursing technicians/assistants and others were homogeneous as no show at work, medical authorization, maternity permission and others. The comparison between the nursing staff in the Hospital

  7. Cre/loxP-mediated excision of a neomycin resistance expression unit from an integrated retroviral vector increases long terminal repeat-driven transcription in human hematopoietic cells.

    Science.gov (United States)

    Fernex, C; Dubreuil, P; Mannoni, P; Bagnis, C

    1997-01-01

    Recombinant retroviruses are currently the most attractive vehicles for gene transfer into hematopoietic cells. Retroviral vectors often contain an easily selectable marker gene in addition to the gene of interest. However, the presence and selection for expression of the selectable gene often result in a significant reduction of the expression of the gene of interest in the transduced cells. In order to circumvent this problem, we have developed a Cre/loxP recombination system for specific excision of the selectable expression unit from integrated retroviruses. A retroviral vector, containing both a neomycin resistance expression unit flanked by loxP sites and granulocyte-macrophage colony-stimulating factor cDNA, was used to transduce the human hematopoietic K-562 cell line. Four transduced cell clones were then superinfected with a retrovirus containing a Cre recombinase expression unit. Molecular analyses of 30 doubly transduced subclones showed a strict correlation between cre expression and loxP-flanked selectable cassette excision, thus implying that Cre recombinase activity is very efficient in a retroviral context. Moreover, the excision of the selectable cassette results in a significant increase of granulocyte-macrophage colony-stimulating factor transcription driven by the retroviral promoter. PMID:9311833

  8. [Occlusal vertical dimension in removable complete dentures].

    Science.gov (United States)

    den Haan, R; Witter, D J

    2011-12-01

    In removable complete dentures, the occlusal vertical dimension is an important factor for patients' satisfaction with aesthetics. An excessively reduced occlusal vertical dimension is especially likely to lead to complaints about aesthetics, whereas an increased occlusal vertical dimension may lead to discomfort and a decision not to wear the complete dentures. There are various methods for determining the occlusal vertical dimension in complete dentures, based on the vertical dimension in the rest position of the mandible or on phonetics. However, none of the methods have proven to be clearly superior, in terms of reliability, than the others. The assessment of the occlusal vertical dimension will become more reliable if several methods are used simultaneously. Moreover, knowledge of the characteristics of the ageing face is essential.

  9. The Deng algorithm in higher dimensions

    CERN Document Server

    Nyonyi, Y; Govinder, K S

    2014-01-01

    We extend an algorithm of Deng in spherically symmetric spacetimes to higher dimensions. We show that it is possible to integrate the generalised condition of pressure isotropy and generate exact solutions to the Einstein field equations for a shear-free cosmological model with heat flow in higher dimensions. Three new metrics are identified which contain results of four dimensions as special cases. We show graphically that the matter variables are well behaved and the speed of sound is causal.

  10. Climate Dimensions in E-Learning

    Directory of Open Access Journals (Sweden)

    Gyöngyi Bujdosó

    2008-05-01

    Full Text Available In designing organization and environment,climate is a conventional conception. By an observation of Halpin, climate means the same for organizations as personality for individuals.This paper introduces the concept of cyber climate and some climate dimensions in e-learning. We deal with some new cyber climate dimensions that should be observed during designing e-learning materials,and provides some other important climate dimensions that should be taken into account while designing digital learning environments.

  11. Spectral dimension flow on continuum random multigraph

    CERN Document Server

    Giasemidis, Georgios; Zohren, Stefan

    2012-01-01

    We review a recently introduced effective graph approximation of causal dynamical triangulations (CDT), the multigraph ensemble. We argue that it is well suited for analytical computations and that it captures the physical degrees of freedom which are important for the reduction of the spectral dimension as observed in numerical simulations of CDT. In addition multigraph models allow us to study the relationship between the spectral dimension and the Hausdorff dimension, thus establishing a link to other approaches to quantum gravity

  12. Exploring Extra Dimensions in Spectroscopy Experiments

    Institute of Scientific and Technical Information of China (English)

    LUO Feng; LIU Hong-Ya

    2006-01-01

    @@ We propose an idea in spectroscopy to search for extra spatial dimensions as well as to detect the possible deviation from Newton's inverse-square law at small scale, and we take high-Z hydrogenic systems and muonic atoms as illustrations. The relevant experiments might help to explore a more than two extra dimensions scenario in the brane world model proposed by Arkani-Hamed, Dimopoulos, Dvali (ADD) and to set constraints for fundamental parameters such as the size of extra dimensions.

  13. Extra dimensions at particle colliders

    Energy Technology Data Exchange (ETDEWEB)

    Dvergsnes, Erik Wolden

    2004-08-01

    This thesis consists of an introduction where we consider different aspects of theories involving extra dimensions, together with four research publications (Papers I-IV) attached at the end. The introductional chapters should serve as background material for better understanding the models on which the articles are based. In Chap. 4 we also present some plots not included in the papers. The topic of Papers I-III is graviton induced Bremsstrahlung. In Paper I we consider the contribution to this process from graviton exchange through gluon-gluon fusion at the LHC, compared to the QED background. Only final-state radiation is considered in Paper I, whereas in Paper II we extend this work to include also the quark-antiquark annihilation with graviton exchange, as well as initial-state radiation for both graviton and Standard Model exchange. Paper III is a study of graviton-induced Bremsstrahlung at e{sup +}e{sup -} colliders, including both initial- and final-state radiation. Paper IV is devoted to a study of the center-edge asymmetry at hadron colliders, an asymmetry which previously had been studied for e{sup +}e{sup -} colliders. The center-edge asymmetry can be used as a method of distinguishing between spin-1 and spin-2 exchange, something which will be of major importance if a signal is observed.

  14. Moving into the third dimension

    CERN Multimedia

    Alizée Dauvergne

    2010-01-01

    One detail at a time, digital 3-D models of CERN’s various machines are being created by the Integration Section in the Machines & Experimental Facilities Group (EN/MEF) . The work, which requires painstaking attention to detail on a colossal scale, facilitates improvements to existing accelerators and the design of new machines in the future.   Virtual representation of the LHC A complete digital mockup of the LHC in three dimensions already exists, including of course the tunnel, the machine systems including magnets and vacuum chambers, but also all of the various services such as cable ladders, piping systems and access control and so on. Only the colour and the texture of the surfaces betray that it is a mockup and not the real thing! The mockup of LINAC4 is finished too. The mockups for the SPS, ISOLDE and the entire PS complex, including transfer lines, are still being created. “Creating these 3-D mockups will allow us to work on forthcoming machine improvements, esp...

  15. Dimensions of vehicle sounds perception.

    Science.gov (United States)

    Wagner, Verena; Kallus, K Wolfgang; Foehl, Ulrich

    2017-10-01

    Vehicle sounds play an important role concerning customer satisfaction and can show another differentiating factor of brands. With an online survey of 1762 German and American customers, the requirement characteristics of high-quality vehicle sounds were determined. On the basis of these characteristics, a requirement profile was generated for every analyzed sound. These profiles were investigated in a second study with 78 customers using real vehicles. The assessment results of the vehicle sounds can be represented using the dimensions "timbre", "loudness", and "roughness/sharpness". The comparison of the requirement profiles and the assessment results show that the sounds which are perceived as pleasant and high-quality, more often correspond to the requirement profile. High-quality sounds are characterized by the fact that they are rather gentle, soft and reserved, rich, a bit dark and not too rough. For those sounds which are assessed worse by the customers, recommendations for improvements can be derived. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. The international dimensions of neuroethics.

    Science.gov (United States)

    Lombera, Sofia; Illes, Judy

    2009-08-01

    Neuroethics, in its modern form, investigates the impact of brain science in four basic dimensions: the self, social policy, practice and discourse. In this study, we analyzed a set of 461 peer-reviewed articles with neuroethics content, published by authors from 32 countries. We analyzed the data for: (1) trends in the development of international neuroethics over time, and (2) how challenges at the intersection of ethics and neuroscience are viewed in countries that are considered developed by International Monetary Fund (IMF) standards, and in those that are developing. Our results demonstrate a steady increase in global participation in neuroethics from 1989 to 2005, characterized by an increase in numbers of articles published specifically on neuroethics, journals publishing these articles, and countries contributing to the literature. The focus from all countries was on the practice of brain science and the amelioration of neurological disease. Indicators of technology creation and diffusion in developing countries were specifically correlated with increases in publications concerning policy implications of brain science. Neuroethics is an international endeavor and, as such, should be sensitive to the impact that context has on acceptance and use of technological innovation.

  17. Higgs Bosons in Extra Dimensions

    CERN Document Server

    Quiros, Mariano

    2015-01-01

    In this paper, motivated by the recent discovery of a Higgs-like boson at the LHC with a mass m_H\\simeq 126 GeV, we review different models where the hierarchy problem is solved by means of a warped extra dimension. In the Randall-Sundrum model electroweak observables provide very strong bounds on the mass of KK modes which motivates extensions to overcome this problem. Two extensions are briefly discussed. One particular extension is based on the deformation of the metric such that it strongly departs from the AdS_5 structure in the IR region while it goes asymptotically to AdS_5 in the UV brane. This model has the IR brane close to a naked metric singularity (which is outside the physical interval) characteristic of soft-walls constructions. The proximity of the singularity provides a strong wave-function renormalization for the Higgs field which suppresses the T and S parameters. The second class of considered extensions are based on the introduction of an extra gauge group in the bulk such that the custod...

  18. Endogenous chloride channels of insect sf9 cells. Evidence for coordinated activity of small elementary channel units

    DEFF Research Database (Denmark)

    Larsen, Erik Hviid; Gabriel, S. E.; Stutts, M. J.

    1996-01-01

    The endogenous Cl- conductance of Spodoptera frugiperda (Sf9) cells was studied 20-35 h after plating out of either uninfected cells or cells infected by a baculovirus vector carrying the cloned beta-galactosidase gene (beta-Gal cells). With the cation Tris+ in the pipette and Na+ in the bath...

  19. Fractal Dimension of Voice-Signal Waveforms

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The fractal dimension is one important parameter that characterizes waveforms. In this paper, we derive a new method to calculate fractal dimension of digital voice-signal waveforms. We show that fractal dimension is an efficient tool for speaker recognition or speech recognition. It can be used to identify different speakers or distinguish speech. We apply our results to Chinese speaker recognition and numerical experiment shows that fractal dimension is an efficient parameter to characterize individual Chinese speakers. We have developed a semiautomatic voiceprint analysis system based on the theory of this paper and former researches.

  20. Spherical Gravitating Systems of Arbitrary Dimension

    CERN Document Server

    Das, A

    2001-01-01

    We study spherically symmetric solutions to the Einstein field equations under the assumption that the space-time may possess an arbitrary number of spatial dimensions. The general solution of Synge is extended to describe systems of any dimension. Arbitrary dimension analogues of known four dimensional solutions are also presented, derived using the above scheme. Finally, we discuss the requirements for the existence of Birkhoff's theorems in space-times of arbitrary dimension with or without matter fields present. Cases are discussed where the assumptions of the theorem are considerably weakened yet the theorem still holds. We also discuss where the weakening of certain conditions may cause the theorem to fail.