Comparison of four specific dynamic office chairs with a conventional office chair: impact upon muscle activation, physical activity and posture.

Science.gov (United States)

Ellegast, Rolf P; Kraft, Kathrin; Groenesteijn, Liesbeth; Krause, Frank; Berger, Helmut; Vink, Peter

2012-03-01

Prolonged and static sitting postures provoke physical inactivity at VDU workplaces and are therefore discussed as risk factors for the musculoskeletal system. Manufacturers have designed specific dynamic office chairs featuring structural elements which promote dynamic sitting and therefore physical activity. The aim of the present study was to evaluate the effects of four specific dynamic chairs on erector spinae and trapezius EMG, postures/joint angles and physical activity intensity (PAI) compared to those of a conventional standard office chair. All chairs were fitted with sensors for measurement of the chair parameters (backrest inclination, forward and sideward seat pan inclination), and tested in the laboratory by 10 subjects performing 7 standardized office tasks and by another 12 subjects in the field during their normal office work. Muscle activation revealed no significant differences between the specific dynamic chairs and the reference chair. Analysis of postures/joint angles and PAI revealed only a few differences between the chairs, whereas the tasks performed strongly affected the measured muscle activation, postures and kinematics. The characteristic dynamic elements of each specific chair yielded significant differences in the measured chair parameters, but these characteristics did not appear to affect the sitting dynamics of the subjects performing their office tasks. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Chair Talk: Resources to Maximize Administrative Efforts

Science.gov (United States)

MacDonald, H.; Chan, M. A.; Bierly, E. W.; Manduca, C. A.; Ormand, C. J.

2009-12-01

Earth science department chairs are generally scientists who have little/no formal administrative training. The common rotation of faculty members in three-six year cycles distributes the heavy leadership responsibilities but involves little preparation beforehand to deal with budgets, fundraising, personnel issues, confrontations, and crises. The amount of information exchange and support upon exit and handoff to the next chair is variable. Resources for chairs include workshops, meetings (ranging from annual meetings of geoscience chairs to monthly meetings of small groups of chairs from various disciplines on a campus), discussions, and online resources. These resources, some of which we designed in the past several years, provide information and support for chairs, help them share best practices, and reduce time spent “reinventing the wheel”. Most of these resources involve groups of chairs in our discipline who meet together. The AGU Board of Heads and Chairs of Earth and Space Science Departments offers annual one-day workshops at the Fall AGU meeting. The specific topics vary from year to year; they have included goals and roles of heads and chairs, fundraising and Advisory Boards, student recruitment, interdisciplinarity, dual-career couples, and undergraduate research. The workshop provides ample opportunities for open discussion. Annual one-two day meetings of groups of geoscience department chairs (e.g., research universities in a particular region) provide an opportunity for chairs to share specific data about their departments (e.g., salaries, graduate student stipends, information about facilities) and discuss strategies. At the College of William and Mary, a small group of chairs meets monthly throughout the year; each session includes time for open discussion as well as a more structured discussion on a particular topic (e.g., merit review, development and fundraising, mentoring early career faculty and the tenure process, leadership styles

Ergonomic Chairs

Science.gov (United States)

1997-01-01

Findings published in the NASA Anthropometric Source Book by Johnson Space Center helped BodyBilt, Inc. to fashion controlled comfort chairs that lessen the harmful effects of gravity on seated workers. Crew members living aboard NASA's Skylab noted that in space the human posture differs from the normal posture caused by the tug of one gravity. There has been an alarming increase in back pain and muscle fatigue in workers, along with a dramatic escalation in repetitive stress injuries. BodyBilt's ergonomically-correct line of office chairs are targeted for the average worker that sits for prolonged periods, be it in the classroom or boardroom. Their roster of national clients lists such organizations as IBM, Microsoft, Texas Instruments, Hewlett-Packard, Eastman-Kodak, Boeing, Motorola, and Walt Disney Studios.

Canada Research Chairs | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

aspx. International Research Chairs Initiative. The International Research Chairs Initiative pairs top research talent from universities in Canada with their counterparts in developing countries to address key development challenges. View more

Special Section: Complementary and Alternative Medicine (CAM): Low Back Pain and CAM

Science.gov (United States)

... Home Current Issue Past Issues Special Section CAM Low Back Pain and CAM Past Issues / Winter 2009 Table of ... benefit from CAM treatment for conditions such as low back pain. Photo courtesy of Glenn Scimonelli "Oh, my aching ...

Design: More than a cool chair

DEFF Research Database (Denmark)

Friis, Silje Alberthe Kamille; Austin, Robert; Sullivan, Erin

2006-01-01

Austin, R., Friis, K., Sullivan, E. 2006. Design: More than a cool chair. Boston: Harvard Business School Publishing.......Austin, R., Friis, K., Sullivan, E. 2006. Design: More than a cool chair. Boston: Harvard Business School Publishing....

Facultative crassulacean acid metabolism (CAM) plants: powerful tools for unravelling the functional elements of CAM photosynthesis.

Science.gov (United States)

Winter, Klaus; Holtum, Joseph A M

2014-07-01

Facultative crassulacean acid metabolism (CAM) describes the optional use of CAM photosynthesis, typically under conditions of drought stress, in plants that otherwise employ C3 or C4 photosynthesis. In its cleanest form, the upregulation of CAM is fully reversible upon removal of stress. Reversibility distinguishes facultative CAM from ontogenetically programmed unidirectional C3-to-CAM shifts inherent in constitutive CAM plants. Using mainly measurements of 24h CO2 exchange, defining features of facultative CAM are highlighted in five terrestrial species, Clusia pratensis, Calandrinia polyandra, Mesembryanthemum crystallinum, Portulaca oleracea and Talinum triangulare. For these, we provide detailed chronologies of the shifts between photosynthetic modes and comment on their usefulness as experimental systems. Photosynthetic flexibility is also reviewed in an aquatic CAM plant, Isoetes howellii. Through comparisons of C3 and CAM states in facultative CAM species, many fundamental biochemical principles of the CAM pathway have been uncovered. Facultative CAM species will be of even greater relevance now that new sequencing technologies facilitate the mapping of genomes and tracking of the expression patterns of multiple genes. These technologies and facultative CAM systems, when joined, are expected to contribute in a major way towards our goal of understanding the essence of CAM. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Office chairs are often not adjusted by end-users

NARCIS (Netherlands)

Vink, P.; Porcar-Seder, R.; Pozo, Á.P. de; Krause, F.

2007-01-01

To find out how many office workers adjust their chairs, 350 office workers in Spain and the Netherlands are observed and questioned on whether they adjust their chairs. It appears that 24% of 236 Spanish office workers and 61% of 100 Dutch subjects never adjust their chair. If the chair is

Women chairs in academic medicine: engendering strategic intuition.

Science.gov (United States)

Isaac, Carol; Griffin, Lindsay

2015-01-01

Because stereotypically masculine behaviors are required for effective leadership, examining female chairs' leadership in academic medicine can provide insight into the complex ways in which gender impacts on their leadership practices. The paper aims to discuss this issue. The author interviewed three female clinical chairs and compared the findings to interviews with 28 of their faculty. Grounded theory analysis of the subsequent text gathered comprehensive, systematic, and in-depth information about this case of interest at a US top-tier academic medical center. Four of five themes from the faculty were consistent with the chair's narrative with modifications: Prior Environment (Motivated by Excellence), Tough, Direct, Transparent (Developing Trust), Communal Actions (Creating Diversity of Opinion), and Building Power through Consensus (an "Artful Exercise") with an additional theme, the Significance (and Insignificance) of a Female Chair. While faculty members were acutely aware of the chair's gender, the chairs paradoxically vacillated between gender being a "non-issue" and noting that male chairs "don't do laundry." All three female chairs in this study independently and explicitly stated that gender was not a barrier, yet intuitively used successful strategies derived from the research literature. This study suggests that while their gender was highlighted by faculty, these women dismissed gender as a "non-issue." The duality of gender for these three female leaders was both minimized and subtly affirmed.

Chair-ish.

Science.gov (United States)

Greenman, Geri

2000-01-01

Presents an art assignment that helps students progress from color theory and the color wheel to understanding watercolor techniques. Explains that students apply their knowledge of watercolor techniques by using three of ten techniques to create different views of a chair in the Cubist style. (CMK)

Characterization of SynCAM surface trafficking using a SynCAM derived ligand with high homophilic binding affinity

International Nuclear Information System (INIS)

Breillat, Christelle; Thoumine, Olivier; Choquet, Daniel

2007-01-01

In order to better probe SynCAM function in neurons, we produced a fusion protein between the extracellular domain of SynCAM1 and the constant fragment of human IgG (SynCAM-Fc). Whether in soluble form or immobilized on latex microspheres, the chimera bound specifically to the surface of hippocampal neurons and recruited endogenous SynCAM molecules. SynCAM-Fc was also used in combination with Quantum Dots to follow the mobility of transfected SynCAM receptors at the neuronal surface. Both immobile and highly mobile SynCAM were found. Thus, SynCAM-Fc behaves as a high affinity ligand that can be used to study the function of SynCAM at the neuronal membrane

PreCam

Energy Technology Data Exchange (ETDEWEB)

Allam, Sahar S. [Fermilab; Tucker, Douglas L. [Fermilab

2015-01-01

The Dark Energy Survey (DES) will be taking the next step in probing the properties of Dark Energy and in understanding the physics of cosmic acceleration. A step towards the photometric calibration of DES is to have a quick, bright survey in the DES footprint (PreCam), using a pre-production set of the Dark Energy Camera (DECam) CCDs and a set of 100 mm×100 mm DES filters. The objective of the PreCam Survey is to create a network of calibrated DES grizY standard stars that will be used for DES nightly calibrations and to improve the DES global relative calibrations. Here, we describe the first year of PreCam observation, results, and photometric calibrations.

Raman Chair | About IASc | Indian Academy of Sciences

Indian Academy of Sciences (India)

Raman Chair. The Raman Chair was instituted in 1972 by the Government of India to commemorate the memory of the founder of the Academy, Sir C. V. Raman. Eminent scientists are invited by the Council of the Academy to occupy the Chair, for periods of between six weeks and six months. Raman Professors who have ...

Science Instructional Leadership: The Role of the Department Chair

Science.gov (United States)

Peacock, Jeremy S.

2014-01-01

With science teachers facing comprehensive curriculum reform that will shape science education for decades to come, high school department chairs represent a critical resource for instructional leadership and teacher support. While the historical literature on the department chair indicates that chairs are in prime positions to provide…

Measuring the Emotions Elicited by Office Chairs

NARCIS (Netherlands)

Reijneveld, K.; Looze, M.P. de; Krause, F.; Desmet, P.

2003-01-01

Office chair designers have traditionally focused their design efforts on optimizing the so-called 'ergonomic fit.' Although the effort to design chairs that support physical comfort is commendable, the focus on ergonomics neglects the possible impact of emotional responses on the general experience

Sitting into the limelight: Lonely Chairs at CERN turns one

CERN Multimedia

Katarina Anthony

2015-01-01

A picture may be worth a thousand words - but a picture of a chair? It’s worth a story all by itself. Over the past year, the "Lonely Chairs at CERN" photography blog has let the chairs do the talking. Along the way, these chairs have inspired and enchanted people across the globe with their honest depiction of the Laboratory.   This lonely chair outside Building 32 was one of the first Rebeca photographed. When CMS physicist Rebeca Gonzalez Suarez created Lonely Chairs at CERN back in April 2014, she was not expecting the immediate reaction it garnered. Within days, the blog had picked up thousands of followers and was featured in Gizmodo and The Guardian. "The response inside CERN was very positive, but the response outside was overwhelming," says Rebeca. "I’ve got a lot of followers who are really into science and are very excited about CERN. They comment about wanting to work here - sometimes on the ugliest chair I&rsqu...

Secondary School Science Department Chairs Leading Change

Science.gov (United States)

Gaubatz, Julie A.

2012-01-01

Secondary school department chairs are content area specialists in their schools and are responsible for providing students with the most appropriate curricula. However, most secondary school department chairs have limited authority to institute change unilaterally (Gmelch, 1993; Hannay & Erb, 1999). To explore how these educational leaders…

Optimisation Methods for Cam Mechanisms

Directory of Open Access Journals (Sweden)

Claudia–Mari Popa

2010-01-01

Full Text Available In this paper we present the criteria which represent the base of optimizing the cam mechanisms and also we perform the calculations for several types of mechanisms. We study the influence of the constructive parameters in case of the simple machines with rotation cam and follower (flat or curve of translation on the curvature radius and that of the transmission angle. As it follows, we present the optimization calculations of the cam and flat rotation follower mechanisms, as well as the calculations for optimizing the cam mechanisms by circular groove followers’ help. For an easier interpretation of the results, we have visualized the obtained cam in AutoCAD according to the script files generated by a calculation program.

The Strategic Value of Succession Planning for Department Chairs.

Science.gov (United States)

Rayburn, William; Grigsby, Kevin; Brubaker, Linda

2016-04-01

Most faculty who aspire to be department chairs are unaware of succession processes at their institution. This Commentary highlights the importance of succession planning, emphasizing the general need for transparency. Succession planning provides institutional leaders the opportunity to optimize, renew, and revitalize their organization by ensuring successful leadership transitions. In contrast to leadership pathways in the military, corporate business, and hospital administration, planned succession of medical school department chairs has received little attention. Different approaches to succession planning are essential for emergency and planned transitions. Emergency succession plans should be in place at all times, regularly revisited, and modified as needed. Department chairs should begin considering their planned succession between one and five years after their initial appointment. The succession discussion between a chair and medical school dean requires cautious, thoughtful, and open discussions. Intradepartmental annual faculty performance evaluations permit the chair to mentor potential successors in acquiring future-oriented, institution-based leadership qualities necessary to be considered for a future department chair position. If health and time permit, the successful chair should remain in his or her current position until a successor is named or, preferably, is in place. Appointment of an interim chair as part of succession planning can be useful for on-the-job training of an internal candidate, yet awkwardness might ensue if there is more than one internal candidate.Succession development offers the great advantage of maintaining smooth organizational performance while optimizing talent management and exploring opportunities for transitioning individuals into leadership roles.

Leading Learning: Science Departments and the Chair

Science.gov (United States)

Melville, Wayne; Campbell, Todd; Jones, Doug

2016-01-01

In this article, we have considered the role of the chair in leading the learning necessary for a department to become effective in the teaching and learning of science from a reformed perspective. We conceptualize the phrase "leading learning" to mean the chair's constitution of influence, power, and authority to intentionally impact…

Expression, crystallization and preliminary diffraction studies of the Pseudomonas putida cytochrome P450cam operon repressor CamR

International Nuclear Information System (INIS)

Maenaka, Katsumi; Fukushi, Kouji; Aramaki, Hironori; Shirakihara, Yasuo

2005-01-01

The P. putida cytochrome P450cam operon repressor CamR has been expressed in E. coli and crystallized in space group P2 1 2 1 2. The Pseudomonas putida cam repressor (CamR) is a homodimeric protein that binds to the camO DNA operator to inhibit the transcription of the cytochrome P450cam operon camDCAB. CamR has two functional domains: a regulatory domain and a DNA-binding domain. The binding of the inducer d-camphor to the regulatory domain renders the DNA-binding domain unable to bind camO. Native CamR and its selenomethionyl derivative have been overproduced in Escherichia coli and purified. Native CamR was crystallized under the following conditions: (i) 12–14% PEG 4000, 50 mM Na PIPES, 0.1 M KCl, 1% glycerol pH 7.3 at 288 K with and without camphor and (ii) 1.6 M P i , 50 mM Na PIPES, 2 mM camphor pH 6.7 at 278 K. The selenomethionyl derivative CamR did not crystallize under either of these conditions, but did crystallize using 12.5% PEG MME 550, 25 mM Na PIPES, 2.5 mM MgCl 2 pH 7.3 at 298 K. Preliminary X-ray diffraction studies revealed the space group to be orthorhombic (P2 1 2 1 2), with unit-cell parameters a = 48.0, b = 73.3, c = 105.7 Å. Native and selenomethionyl derivative data sets were collected to 3 Å resolution at SPring-8 and the Photon Factory

Job satisfaction among chairs of surgery from Europe and North America.

Science.gov (United States)

Tschuor, Christoph; Raptis, Dimitri Aristotle; Morf, Manuela Christina; Staffelbach, Bruno; Manser, Tanja; Clavien, Pierre-Alain

2014-11-01

Strong evidence exists associating job satisfaction and risk of burnout with productivity, efficiency, and creativity in many organizations. However no data are available assessing chairs of surgery. This study assessed job satisfaction and risk for burnout of surgical chairs from Europe and North America and identified contributing factors. A survey among 650 chairs in surgery from 23 European and 2 North American countries was conducted in 2012. Satisfaction at work was analyzed using the validated Global Job Satisfaction (GJS) instrument and the abbreviated Maslach Burnout Inventory. Additional items targeting personal and environmental factors were included. The rate of chairs reached successfully was 86%, the overall response rate was 29% (188/650), with 1% female. Median age was 58 years. 11% of chairs were dissatisfied with work. Younger age and being fewer years in practice as a chair was associated with higher job satisfaction (P = .054 and P = .003). Surgical specialty with the greatest median GJS score was hepatopancreatobiliary, whereas vascular surgery scored lowest. Chairs desire to devote 20% more of their time on research. Clerical support as well as the ability to be innovative was suggested by 51% and 45%, respectively, to improve job satisfaction. Compared with Europeans, North American chairs were overall more satisfied and would recommend their job to their children. North American chairs seem to be more satisfied at work and at less risk for burnout than European chairs. The overall job satisfaction was greater among chairs compared with previously published reports of young, board-certified surgeons or residents (89% vs 87% and 66%, respectively). The superior satisfaction in chairs is strongest related to career achievements, innovation, and lifestyle. Copyright © 2014 Elsevier Inc. All rights reserved.

Ecophysiology of Crassulacean Acid Metabolism (CAM).

Science.gov (United States)

Lüttge, Ulrich

2004-06-01

Crassulacean Acid Metabolism (CAM) as an ecophysiological modification of photosynthetic carbon acquisition has been reviewed extensively before. Cell biology, enzymology and the flow of carbon along various pathways and through various cellular compartments have been well documented and discussed. The present attempt at reviewing CAM once again tries to use a different approach, considering a wide range of inputs, receivers and outputs. Input is given by a network of environmental parameters. Six major ones, CO(2), H(2)O, light, temperature, nutrients and salinity, are considered in detail, which allows discussion of the effects of these factors, and combinations thereof, at the individual plant level ('physiological aut-ecology'). Receivers of the environmental cues are the plant types genotypes and phenotypes, the latter including morphotypes and physiotypes. CAM genotypes largely remain 'black boxes', and research endeavours of genomics, producing mutants and following molecular phylogeny, are just beginning. There is no special development of CAM morphotypes except for a strong tendency for leaf or stem succulence with large cells with big vacuoles and often, but not always, special water storage tissues. Various CAM physiotypes with differing degrees of CAM expression are well characterized. Output is the shaping of habitats, ecosystems and communities by CAM. A number of systems are briefly surveyed, namely aquatic systems, deserts, salinas, savannas, restingas, various types of forests, inselbergs and paramós. While quantitative census data for CAM diversity and biomass are largely missing, intuition suggests that the larger CAM domains are those systems which are governed by a network of interacting stress factors requiring versatile responses and not systems where a single stress factor strongly prevails. CAM is noted to be a strategy for variable, flexible and plastic niche occupation rather than lush productivity. 'Physiological syn-ecology' reveals

Complementary and alternative medicine use of women with breast cancer : Self-help CAM attracts other women than guided CAM therapies

NARCIS (Netherlands)

Lo-Fo-Wong, Deborah N. N.; Ranchor, Adelita V.; de Haes, Hanneke C. J. M.; Sprangers, Mirjam A. G.; Henselmans, Inge

2012-01-01

Objective: Examine stability of use of complementary and alternative medicine (CAM) of breast cancer patients, reasons for CAM use, and sociodemographic, clinical, and psychological predictors of CAM use. Methods: CAM use was assessed after adjuvant therapy and six months later. Following the CAM

Complementary and alternative medicine use of women with breast cancer: Self-help CAM attracts other women than guided CAM therapies

NARCIS (Netherlands)

Lo-Fo-Wong, Deborah N. N.; Ranchor, Adelita V.; de Haes, Hanneke C. J. M.; Sprangers, Mirjam A. G.; Henselmans, Inge

2012-01-01

Objective: Examine stability of use of complementary and alternative medicine (CAM) of breast cancer patients, reasons for CAM use, and sociodemographic, clinical, and psychological predictors of CAM use. Methods: CAM use was assessed after adjuvant therapy and six months later. Following the CAM

Surgeons’ muscle load during robotic-assisted laparoscopy performed with a regular office chair and the preferred of two ergonomic chairs

DEFF Research Database (Denmark)

Dalager, T.; Jensen, P. T.; Winther, T. S.

2018-01-01

associated with poor ergonomics and musculoskeletal pain. The ergonomic condition in the robotic console is partially dependent upon the chair provided, which often is a regular office chair. Our study quantified and compared the muscular load during robotic-assisted laparoscopy using one of two custom built...

Experimental Study on Revetec Engine Cam Performance

International Nuclear Information System (INIS)

Gasim, Maisara Mohyeldin; Chui, Lee Giok; Anwar, Khirul Azhar bin

2012-01-01

In Revetec engine (three-lobed) cam replaces the crankshaft to convert the reciprocating motion of the engine piston, to a rotating motion in the drive line. Since the cam controls the piston movement, the cam profile has a great effect on engine performance. In this paper an experimental study was done to a (three- lobed) cam with Cycloidal motion profile but with different ratios between the base circle radius of the cam and the radius of the roller follower. DEWESoft was used to find the displacement and the vibration of the piston, and compare the actual results from the test with the theoretical results from the cam profile equation. The results showed that there is a periods of miss contact between the follower and the cam when the ratio between the base circle radius of the cam and the radius of the roller follower is less than a certain value, and also increasing of vibration. The suggested ratio between the cam and follower radius is to be more than 2:1.

Burnout in United States Academic Chairs of Radiation Oncology Programs

Energy Technology Data Exchange (ETDEWEB)

Kusano, Aaron S. [Department of Radiation Oncology, University of Washington School of Medicine, Seattle, Washington (United States); Thomas, Charles R., E-mail: thomasch@ohsu.edu [Department of Radiation Medicine, Knight Cancer Institute/Oregon Health and Science University, Portland, Oregon (United States); Bonner, James A. [Department of Radiation Oncology, University of Alabama at Birmingham, Birmingham, Alabama (United States); DeWeese, Theodore L. [Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins Medical Institutions, Baltimore, Maryland (United States); Formenti, Silvia C. [Department of Radiation Oncology, New York University, New York, New York (United States); Hahn, Stephen M. [Department of Radiation Oncology, Perelman School of Medicine at the University of Pennsylvania, Philadelphia, Pennsylvania (United States); Lawrence, Theodore S. [Department of Radiation Oncology, University of Michigan, Ann Arbor, Michigan (United States); Mittal, Bharat B. [Department of Radiation Oncology, Northwestern University, Chicago, Ilinois (United States)

2014-02-01

Purpose: The aims of this study were to determine the self-reported prevalence of burnout in chairs of academic radiation oncology departments, to identify factors contributing to burnout, and to compare the prevalence of burnout with that seen in other academic chair groups. Methods and Materials: An anonymous online survey was administered to the membership of the Society of Chairs of Academic Radiation Oncology Programs (SCAROP). Burnout was measured with the Maslach Burnout Inventory-Human Services Survey (MBI-HSS). Results: Questionnaires were returned from 66 of 87 chairs (76% response rate). Seventy-nine percent of respondents reported satisfaction with their current positions. Common major stressors were budget deficits and human resource issues. One-quarter of chairs reported that it was at least moderately likely that they would step down in the next 1 to 2 years; these individuals demonstrated significantly higher emotional exhaustion. Twenty-five percent of respondents met the MBI-HSS criteria for low burnout, 75% for moderate burnout, and none for high burnout. Group MBI-HSS subscale scores demonstrated a pattern of moderate emotional exhaustion, low depersonalization, and moderate personal accomplishment, comparing favorably with other specialties. Conclusions: This is the first study of burnout in radiation oncology chairs with a high response rate and using a validated psychometric tool. Radiation oncology chairs share similar major stressors to other chair groups, but they demonstrate relatively high job satisfaction and lower burnout. Emotional exhaustion may contribute to the anticipated turnover in coming years. Further efforts addressing individual and institutional factors associated with burnout may improve the relationship with work of chairs and other department members.

Burnout in United States Academic Chairs of Radiation Oncology Programs

International Nuclear Information System (INIS)

Kusano, Aaron S.; Thomas, Charles R.; Bonner, James A.; DeWeese, Theodore L.; Formenti, Silvia C.; Hahn, Stephen M.; Lawrence, Theodore S.; Mittal, Bharat B.

2014-01-01

Purpose: The aims of this study were to determine the self-reported prevalence of burnout in chairs of academic radiation oncology departments, to identify factors contributing to burnout, and to compare the prevalence of burnout with that seen in other academic chair groups. Methods and Materials: An anonymous online survey was administered to the membership of the Society of Chairs of Academic Radiation Oncology Programs (SCAROP). Burnout was measured with the Maslach Burnout Inventory-Human Services Survey (MBI-HSS). Results: Questionnaires were returned from 66 of 87 chairs (76% response rate). Seventy-nine percent of respondents reported satisfaction with their current positions. Common major stressors were budget deficits and human resource issues. One-quarter of chairs reported that it was at least moderately likely that they would step down in the next 1 to 2 years; these individuals demonstrated significantly higher emotional exhaustion. Twenty-five percent of respondents met the MBI-HSS criteria for low burnout, 75% for moderate burnout, and none for high burnout. Group MBI-HSS subscale scores demonstrated a pattern of moderate emotional exhaustion, low depersonalization, and moderate personal accomplishment, comparing favorably with other specialties. Conclusions: This is the first study of burnout in radiation oncology chairs with a high response rate and using a validated psychometric tool. Radiation oncology chairs share similar major stressors to other chair groups, but they demonstrate relatively high job satisfaction and lower burnout. Emotional exhaustion may contribute to the anticipated turnover in coming years. Further efforts addressing individual and institutional factors associated with burnout may improve the relationship with work of chairs and other department members

Radiographic Prevalence of Dysplasia, Cam, and Pincer Deformities in Elite Ballet.

Science.gov (United States)

Harris, Joshua D; Gerrie, Brayden J; Varner, Kevin E; Lintner, David M; McCulloch, Patrick C

2016-01-01

The demands of hip strength and motion in ballet are high. Hip disorders, such as cam and pincer deformities or dysplasia, may affect dance performance. However, the prevalence of these radiographic findings is unknown. To determine the prevalence of radiographic cam and pincer deformities, borderline dysplasia, and dysplasia in a professional ballet company. Cross-sectional study; Level of evidence, 3. An institutional review board-approved cross-sectional investigation of a professional ballet company was undertaken. Male and female adult dancers were eligible for inclusion. Four plain radiographs were obtained (standing anteroposterior pelvis, bilateral false profile, and supine Dunn 45°) and verified for adequacy. Cam and pincer deformities, dysplasia, borderline dysplasia, and osteoarthritis were defined. All plain radiographic parameters were measured and analyzed on available radiographs. Student t test, chi-square test (and Fisher exact test), and Spearman correlation analyses were performed to compare sexes, groups, and the effect of select radiographic criteria. A total of 47 dancers were analyzed (21 males, 26 females; mean age (±SD), 23.8 ± 5.4 years). Cam deformity was identified in 25.5% (24/94) of hips and 31.9% (15/47) of subjects, with a significantly greater prevalence in male dancers than females (48% hips and 57% subjects vs 8% hips and 12% subjects; P ballet company, a high prevalence of radiographic abnormalities was found, including cam and pincer deformity and dysplasia. The results also revealed several sex-related differences of these abnormalities in this unique population. The long-term implications of these findings in this group of elite athletes remain unknown, and this issue warrants future investigation. © 2015 The Author(s).

Science of active galactic nuclei with the GTC and CanariCam

Science.gov (United States)

Levenson, Nancy A.; Packham, Christopher C.; Alonso-Herrero, Almudena; Aretxaga, Itziar; Colina, Luis; Díaz-Santos, Tanio; Elitzur, Moshe; Mason, Rachel E.; Perlman, Eric S.; Radomski, James T.; Roche, Patrick F.; Rodríguez Espinosa, José Miguel; Young, Stuart; Telesco, Charles M.

2008-07-01

CanariCam is the facility mid-infrared (MIR) instrument for the Gran Telescopio Canarias (GTC), a 10.4m telescope at the Observatorio del Roque de los Muchachos on La Palma. One of the science drivers for CanariCam is the study of active galactic nuclei (AGN). We will exploit the instrument's high sensitivity in imaging, spectroscopy, and polarimetry modes to answer fundamental questions of AGN and their host galaxies. Dust in the nucleus of an active galaxy reprocesses the intrinsic radiation of the central engine to emerge in the MIR. Current work demonstrates that the hot dust immediately associated with the AGN, which blocks direct views of the AGN from some lines of sight, is confined to small (parsec) scales. Thus, high spatial resolution is essential to probe the "torus" of unified AGN models separate from the host galaxy. CanariCam provides a 0.08" pixel scale for Nyquist sampling the diffraction-limited point spread function at 8μm, and narrow (0.2") spectroscopy slits (with R=120-1300). New observations with the GTC/CanariCam will provide key constraints on the physical conditions in the clumpy torus, and we will sensitively determine AGN obscuration as a function of nuclear activity. We will therefore address the fueling process and its relationship to the torus, the interaction with the host galaxy, and dust chemistry. These data will be essential preparation for the next generation of telescopes that will observe the distant universe directly to explore galaxy and black hole formation and evolution, and the GTC/CanariCam system uniquely provides multiple modes to probe AGN.

Nouvelle initiative des chaires de recherche Canada-Afrique du Sud ...

International Development Research Centre (IDRC) Digital Library (Canada)

8 déc. 2016 ... Elles s'appuient sur le South African Research Chairs Initiative (SARChl), ainsi que sur le programme de chaires de recherche industrielle, dont le financement provient en partie du Conseil de recherches en sciences naturelles et en génie du Canada (CRSNG) et du Programme des chaires de recherche ...

Influence of Chair Vibrations on Indoor Sonic Boom Annoyance

Science.gov (United States)

Rathsam, Jonathan; Klos, Jacob; Loubeau, Alexandra

2015-01-01

One goal of NASA’s Commercial Supersonic Technology Project is to identify candidate noise metrics suitable for regulating quiet sonic boom aircraft. A suitable metric must consider the short duration and pronounced low frequency content of sonic booms. For indoor listeners, rattle and creaking sounds and floor and chair vibrations may also be important. The current study examined the effect of such vibrations on the annoyance of test subjects seated indoors. The study involved two chairs exposed to nearly identical acoustic levels: one placed directly on the floor, and the other isolated from floor vibrations by pneumatic elastomeric mounts. All subjects experienced both chairs, sitting in one chair for the first half of the experiment and the other chair for the remaining half. Each half of the experiment consisted of 80 impulsive noises played at the exterior of the sonic boom simulator. When all annoyance ratings were analyzed together there appeared to be no difference in mean annoyance with isolation condition. When the apparent effect of transfer bias was removed, a subtle but measurable effect of vibration on annoyance was identified.

[Understanding chair-side digital technology for stomatology from an engineering viewpoint].

Science.gov (United States)

Zhao, Y J; Wang, Y

2018-04-09

In recent years with the rapid development of digital technology for stomatology, the application field, application model, technical features and technical connotation of the chair-side digital technology has got development and change. The open modular system has gradually replaced the traditional closed system, and the application field of digital technology is no longer limited to chair-side dental restoration, it also has been extend to various kinds of chair-side digital treatment-assisted technology. In this paper, from the engineering point of view, the up to date general connotation of chair-side digital technology was explained, the characteristics and the development of each unit in chair-side digital technology were analyzed, and the application pattern and the localization status were also discussed in this paper. The aim of this paper was to introduce the trend of chair-side digital technological to readers and to better guide clinical application.

Cryo-EM Structure of a KCNQ1/CaM Complex Reveals Insights into Congenital Long QT Syndrome.

Science.gov (United States)

Sun, Ji; MacKinnon, Roderick

2017-06-01

KCNQ1 is the pore-forming subunit of cardiac slow-delayed rectifier potassium (I Ks ) channels. Mutations in the kcnq1 gene are the leading cause of congenital long QT syndrome (LQTS). Here, we present the cryoelectron microscopy (cryo-EM) structure of a KCNQ1/calmodulin (CaM) complex. The conformation corresponds to an "uncoupled," PIP 2 -free state of KCNQ1, with activated voltage sensors and a closed pore. Unique structural features within the S4-S5 linker permit uncoupling of the voltage sensor from the pore in the absence of PIP 2 . CaM contacts the KCNQ1 voltage sensor through a specific interface involving a residue on CaM that is mutated in a form of inherited LQTS. Using an electrophysiological assay, we find that this mutation on CaM shifts the KCNQ1 voltage-activation curve. This study describes one physiological form of KCNQ1, depolarized voltage sensors with a closed pore in the absence of PIP 2 , and reveals a regulatory interaction between CaM and KCNQ1 that may explain CaM-mediated LQTS. Copyright © 2017 Elsevier Inc. All rights reserved.

Should CAM and CAM Training Programs Be Included in the Curriculum of Schools That Provide Health Education?

Directory of Open Access Journals (Sweden)

2016-12-01

Full Text Available Objectives: This study aimed to determine the knowledge levels and attitudes of School of Health and Vocational School of Health students toward complementary and alternative medicine (CAM. Methods: Three hundred thirty-three (333 students studying at the Mehmet Akif Ersoy University School of Health and the Golhisar Vocational School of Health in Burdur, Turkey, were included in the study. Research data were collected by using a survey method based on the expressed opinions of the participants. Results: Of the participants, 69.7% were female and 97% were single (unmarried. Of cigarette users and those with chronic illnesses, 46.8% and 47.8%, respectively, used CAM. Those using CAM were statistically more likely to be female (P < 0.021, to have higher grades (P < 0.007, to be single (P < 0.005, to be vocational school of health graduates (P < 0.008, and to have fathers at work (P < 0.021. While 9.6% of the students thought CAM to be nonsense, 10.8% thought that the methods of CAM should be tried before consulting a doctor. Conclusion: A majority of the students in the study population were found to use complementary and alternative medicine, but that they lacked information about its methods. As a way to address this, CAM should be included in the curriculum of schools that provide health education, and CAM training programs should be given to healthcare professionals to improve their knowledge of CAM. In Turkey, many more studies should be performed to determine nurses’ and doctors’ knowledge of and attitudes about CAM methods so that they can give correct guidance to society and take more active responsibility in improving patient safety.

The Hot Seat: Profiling the Marketing Department Chair

Science.gov (United States)

Aggarwal, Praveen; Rochford, Linda; Vaidyanathan, Rajiv

2009-01-01

The chair of the marketing department serves a critical role in balancing the needs of the university with those of the faculty. Because most department chairs are drawn from the faculty in their departments, the administrative role they take on conflicts with their desire to maintain their academic roles as teacher and researcher. Although there…

JunoCam Images of Jupiter: Science from an Outreach Experiment

Science.gov (United States)

Hansen, C. J.; Orton, G. S.; Caplinger, M. A.; Ravine, M. A.; Rogers, J.; Eichstädt, G.; Jensen, E.; Bolton, S. J.; Momary, T.; Ingersoll, A. P.

2017-12-01

The Juno mission to Jupiter carries a visible imager on its payload primarily for outreach, and also very useful for jovian atmospheric science. Lacking a formal imaging science team, members of the public have volunteered to process JunoCam images. Lightly processed and raw JunoCam data are posted on the JunoCam webpage at https://missionjuno.swri.edu/junocam/processing. Citizen scientists download these images and upload their processed contributions. JunoCam images through broadband red, green and blue filters and a narrowband methane filter centered at 889 nm mounted directly on the detector. JunoCam is a push-frame imager with a 58 deg wide field of view covering a 1600 pixel width, and builds the second dimension of the image as the spacecraft rotates. This design enables capture of the entire pole of Jupiter in a single image at low emission angle when Juno is 1 hour from perijove (closest approach). At perijove the wide field of view images are high-resolution while still capturing entire storms, e.g. the Great Red Spot. Juno's unique polar orbit yields polar perspectives unavailable to earth-based observers or most previous spacecraft. The first discovery was that the familiar belt-zone structure gives way to more chaotic storms, with cyclones grouped around both the north and south poles [1, 2]. Recent time-lapse sequences have enabled measurement of the rotation rates and wind speeds of these circumpolar cyclones [3]. Other topics are being investigated with substantial, in many cases essential, contributions from citizen scientists. These include correlating the high resolution JunoCam images to storms and disruptions of the belts and zones tracked throughout the historical record. A phase function for Jupiter is being developed empirically to allow image brightness to be flattened from the subsolar point to the terminator. We are studying high hazes and the stratigraphy of the upper atmosphere, utilizing the methane filter, structures illuminated

Leadership experiences and characteristics of chairs of academic departments of psychiatry.

Science.gov (United States)

Keith, Samuel J; Buckley, Peter F

2011-01-01

Effective leadership in academic medicine requires a broad constellation of skills, experiences, and core values. The authors sought to describe and define these. The authors conducted a web-based survey among 132 Chairs of North American departments of psychiatry. Eighty-five Chairs (64%) responded to the survey, the majority of whom were first-time Chairs. Identified leadership attributes included strategic/visionary acumen, interpersonal communication skills, core administrative and academic/technical skills, motivational capacity, personal integrity, and altruism/tenacity. The identified values are consistent with the leadership attributes that are described as necessary for success in the business community. Developing the required skill-set among faculty who aspire to become a departmental Chair is an important commitment for Deans and extant psychiatry Chairs. Copyright © 2011 Academic Psychiatry

CAMS achievements in 1995

International Nuclear Information System (INIS)

Berg, Oe.; Fantoni, P.; Iguchi, Y.; Meyer, G.; Soerensen, A.; Dyck, C. van.

1996-01-01

CAMS (Computerized Accident Management Support) is a system being developed as a joint research activity at the Halden Reactor Project with additional financing from the Swedish Nuclear Inspectorate (SKI) and the Nordic NKS/RAK-2 project. Three types of users are envisaged: the staff in the control room, the staff in the technical support centre and the staff at a national emergency centre. It is still an experimental system. The Swedish Nuclear Inspectorate kindly accepted to test CAMS at a safety exercise on the 4th of May, 1995. CAMS is designed assuming automatic data transfer from the plant. Missing the data link, a simulator running in the next room was updated now and then with data received by phone. As seen from CAMS, it did not matter if the data came from a fake plant or from a real plant, except that the data were delayed. Overall, it seemed that CAMS can be a very important tool for a national authority. A data link from the plant would increase its usefulness. Several comments on design features were collected and will be used to improve the system. The model needs more inputs to control the main parameters, and a larger repertoire of fault conditions should be put into the model. In the second half of 1995 the work on CAMS has concentrated upon designing new modules for signal validation, tracking simulation and state identification. This will provide better capabilities for on-line monitoring and assessment of the plant state. Further, it has been proposed to introduce Probabilistic Safety Assessment (PSA) to assist in risk monitoring. A first prototype has been made on a personal computer showing the main features of such a PSA module. (au)

Raman Chair | About IASc | Indian Academy of Sciences

Indian Academy of Sciences (India)

The Raman Chair was instituted in 1972 by the Government of India to commemorate the memory of the founder of the Academy, Sir C. V. Raman. Eminent scientists are invited by the Council of the Academy to occupy the Chair, for periods of between six weeks and six months. Raman Professors who have occupied the ...

What a medical school chair wants from the dean

Directory of Open Access Journals (Sweden)

Hromas R

2018-05-01

Full Text Available Robert Hromas,1 Robert Leverence,1 Lazarus K Mramba,2 J Larry Jameson,3 Caryn Lerman,3 Thomas L Schwenk,4 Ellen M Zimmermann,2 Michael L Good51The Office of the Dean, Department of Medicine, University of Texas Health Science Center San Antonio, San Antonio, TX, USA; 2Department of Medicine, College of Medicine, University of Florida Health, Gainesville, FL, USA; 3Department of Medicine, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA, USA; 4Department of Family Medicine, School of Medicine, University of Nevada Reno, Reno, NV, USA; 5Department of Anesthesiology, College of Medicine, University of Florida Health, Gainesville, FL, USAAbstract: Economic pressure has led the evolution of the role of the medical school dean from a clinician educator to a health care system executive. In addition, other dynamic requirements also have likely led to changes in their leadership characteristics. The most important relationship a dean has is with the chairs, yet in the context of the dean’s changing role, little attention has been paid to this relationship. To frame this discussion, we asked medical school chairs what characteristics of a dean’s leadership were most beneficial. We distributed a 26-question survey to 885 clinical and basic science chairs at 41 medical schools. These chairs were confidentially surveyed on their views of six leadership areas: evaluation, barriers to productivity, communication, accountability, crisis management, and organizational values. Of the 491 chairs who responded (response rate =55%, 88% thought that their dean was effective at leading the organization, and 89% enjoyed working with their dean. Chairs indicated that the most important area of expertise of a dean is to define a strategic vision, and the most important value for a dean is integrity between words and deeds. Explaining the reasons behind decisions, providing good feedback, admitting errors, open discussion of complex or

Women chairs in academic medicine: engendering strategic intuition

Science.gov (United States)

Isaac, Carol; Griffin, Lindsay

2017-01-01

Purpose Because stereotypically masculine behaviors are required for effective leadership, examining female chairs’ leadership in academic medicine can provide insight into the complex ways in which gender impacts on their leadership practices. The paper aims to discuss this issue. Design/methodology/approach The author interviewed three female clinical chairs and compared the findings to interviews with 28 of their faculty. Grounded theory analysis of the subsequent text gathered comprehensive, systematic, and in-depth information about this case of interest at a US top-tier academic medical center. Findings Four of five themes from the faculty were consistent with the chair’s narrative with modifications: Prior Environment (Motivated by Excellence), Tough, Direct, Transparent (Developing Trust), Communal Actions (Creating Diversity of Opinion), and Building Power through Consensus (an “Artful Exercise”) with an additional theme, the Significance (and Insignificance) of a Female Chair. While faculty members were acutely aware of the chair’s gender, the chairs paradoxically vacillated between gender being a “non-issue” and noting that male chairs “don’t do laundry.” All three female chairs in this study independently and explicitly stated that gender was not a barrier, yet intuitively used successful strategies derived from the research literature. Originality/value This study suggests that while their gender was highlighted by faculty, these women dismissed gender as a “non-issue.” The duality of gender for these three female leaders was both minimized and subtly affirmed. PMID:26045192

Demographic and Personal Characteristics of Male and Female Chairs in Academic Psychiatry.

Science.gov (United States)

Doyle, Marley; Pederson, Aderonke; Meltzer-Brody, Samantha

2016-06-01

Despite the strong representation of female psychiatrists in residency and early-career positions, the number of female faculty sharply decreases in tenured or executive leadership positions. Why there exists a marked change in representation at the level of senior leadership within academic psychiatry is unclear. The authors investigated the causative factors contributing to this observation and gathered information about the personal characteristics of women in executive leadership roles. The authors surveyed psychiatry chairs at academic institutions. They identified all female chairs and randomly selected a group of male chairs to serve as a control group. The survey assessed perceived barriers, strengths, and weaknesses and differences in demographics and leadership styles between female and male chairs. Ten percent of psychiatry chairs were female. Male chairs were more likely than female chairs to head large departments (p = 0.02, confidence interval (CI) -17.1-69.1) and had a higher H-index (p = 0.001, CI 6.6-37.2). Female chairs were more likely than male chairs to perceive barriers in their career development (p = 0.01, CI 0.7-2.2), citing little or no mentorship (p = 0.04), gender discrimination (p = 0.0001), and family obligations (p = 0.001) more often. Academic institutions must incorporate programs to decrease barriers and work to achieve equitable representation of women in upper-level leadership positions. Moreover, academic medicine must evolve to cultivate a family-friendly environment that successfully supports both genders.

*Abstracts - 7th IN-CAM Research Symposium, Evaluating CAM Practices: Effectiveness, Integration, Economics & Safety - November 2012.

Science.gov (United States)

Boon, Heather; Verhoef, Marja J

2012-10-23

Abstract The following are abstracts of oral and poster presentations given at the 7th IN-CAM Research Symposium - Evaluating CAM Practices: Effectiveness, Integration, Economics & Safety, and the 4th HomeoNet Research Forum, a pre-Symposium event. The IN-CAM Research Symposium was held November 2 to 4, 2012 at the Leslie Dan Faculty of Pharmacy, University of Toronto, in Toronto, Ontario, Canada. For more information, please visit: www.incamresearch.ca.

EcoHealth Chairs on Health

International Development Research Centre (IDRC) Digital Library (Canada)

Marie-Isabelle Beyer

2013-09-03

Sep 3, 2013 ... transforming social-ecological systems—including understanding, policies and policy processes ..... IDRC will seek to select Chairs that optimize the Ecohealth field- ..... However, IDRC does not pay import duties, sales tax or.

Analysis of flow coefficient in chair manufacture

OpenAIRE

Ivković Dragoljub; Živković Slaven

2005-01-01

The delivery on time is not possible without the good-quality planning of deadlines, i.e. planning of the manufacturing process duration. The study of flow coefficient enables the realistic forecasting of the manufacturing process duration. This paper points to the significance of the study of flow coefficient on scientific basis so as to determine the terms of the end of the manufacture of chairs made of sawn timber. Chairs are the products of complex construction, often almost completely ma...

Highlight: Research Chair unites four West African universities in ...

International Development Research Centre (IDRC) Digital Library (Canada)

2016-04-14

Apr 14, 2016 ... Local and regional experts including researchers, consultants, and academics convened in Cotonou, Benin, on February 26, 2015 to launch a Research Chair on EcoHealth. The Chair unites four West African universities that have pledged to reduce air pollution and non-communicable respiratory ...

Thyroid Disease and Complementary and Alternative Medicine (CAM)

Science.gov (United States)

... Alternative Medicine in Thyroid Disease Complementary and Alternative Medicine in Thyroid Disease (CAM) WHAT IS COMPLEMENTARY AND ALTERNATIVE MEDICINE (CAM)? Complementary and Alternative Medicine (CAM) is defined ...

Report of the 10(th) Asia-Pacific Federation of Societies for Surgery of the Hand Congress (Organising Chair and Scientific Chair).

Science.gov (United States)

A, Roohi Sharifah; Abdullah, Shalimar

2016-10-01

A report on the 10(th) Asia-Pacific Federation of Societies for the Surgery of the Hand and 6(th) Asia-Pacific Federation of Societies for Hand Therapists is submitted detailing the numbers of attendees participating, papers presented and support received as well the some of the challenges faced and how best to overcome them from the local conference chair and scientific chair point of view.

Turnover of First-Time Chairs in Departments of Psychiatry

Science.gov (United States)

Buckley, Peter F.; Rayburn, William F.

2011-01-01

Objective: The authors examine the tenure of first-time Chairs in academic departments of psychiatry in order to stimulate discussion on extant workforce and leadership issues. Method: Data on tenure of Chairs in psychiatry and other nonsurgical specialties were derived from the longitudinal database of the Association of American Medical Colleges…

Does physical exposure throughout working life influence chair-rise performance in midlife?

DEFF Research Database (Denmark)

Møller, Anne; Reventlow, Susanne; Hansen, Åse Marie

2015-01-01

OBJECTIVES: Our aim was to study associations between physical exposures throughout working life and physical function measured as chair-rise performance in midlife. METHODS: The Copenhagen Aging and Midlife Biobank (CAMB) provided data about employment and measures of physical function. Individual...... and confirmed the findings. CONCLUSIONS: Higher physical exposure throughout working life is associated with slightly poorer chair-rise performance. The associations between exposure and outcome were non-linear.......-years and chair-rise performance (number of chair-rises in 30 s) were analysed in multivariate linear and non-linear regression models adjusted for covariates. RESULTS: Mean age among the 5095 participants was 59 years in both genders, and, on average, men achieved 21.58 (SD=5.60) and women 20.38 (SD=5.33) chair...

76 FR 17118 - Environmental Management Site-Specific Advisory Board Chairs

Science.gov (United States)

2011-03-28

... DEPARTMENT OF ENERGY Environmental Management Site-Specific Advisory Board Chairs AGENCY... Environmental Management Site-Specific Advisory Board (EM SSAB) Chairs. The Federal Advisory Committee Act (Pub... areas of environmental restoration, waste management, and related activities. Tentative Agenda Topics...

76 FR 62054 - Environmental Management Site-Specific Advisory Board Chairs

Science.gov (United States)

2011-10-06

... DEPARTMENT OF ENERGY Environmental Management Site-Specific Advisory Board Chairs AGENCY... of the Environmental Management Site-Specific Advisory Board (EM SSAB) Chairs. The Federal Advisory... environmental restoration, waste management, and related activities. Tentative Agenda Topics [cir] EM Program...

Cranial nerves neuropraxia after shoulder arthroscopy in beach chair position.

Science.gov (United States)

Cogan, A; Boyer, P; Soubeyrand, M; Hamida, F Ben; Vannier, J-L; Massin, P

2011-05-01

We report a case of neuropraxia of the 9th, 10th and 12th cranial nerve pairs after arthroscopic rotator cuff repair in the beach chair position. The elements in the medical file seem to exclude an intracranial cause of the lesions and support a mechanical, extracranial cause due to intubation and/or the beach chair position. This clinical case report shows the neurological risks of the beach chair position during arthroscopic shoulder surgery and presents the essential safety measures to prevent these risks. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

"Rocking-Chair"-Type Metal Hybrid Supercapacitors.

Science.gov (United States)

Yoo, Hyun Deog; Han, Sang-Don; Bayliss, Ryan D; Gewirth, Andrew A; Genorio, Bostjan; Rajput, Nav Nidhi; Persson, Kristin A; Burrell, Anthony K; Cabana, Jordi

2016-11-16

Hybrid supercapacitors that follow a "rocking-chair"-type mechanism were developed by coupling divalent metal and activated carbon electrodes in nonaqueous electrolytes. Conventional supercapacitors require a large amount of electrolyte to provide a sufficient quantity of ions to the electrodes, due to their Daniell-type mechanism that depletes the ions from the electrolyte while charging. The alternative "rocking-chair"-type mechanism effectively enhances the energy density of supercapacitors by minimizing the necessary amount of electrolyte, because the ion is replenished from the metal anode while it is adsorbed to the cathode. Newly developed nonaqueous electrolytes for Mg and Zn electrochemistry, based on bis(trifluoromethylsulfonyl)imide (TFSI) salts, made the metal hybrid supercapacitors possible by enabling reversible deposition on the metal anodes and reversible adsorption on an activated carbon cathode. Factoring in gains through the cell design, the energy density of the metal hybrid supercapacitors is projected to be a factor of 7 higher than conventional devices thanks to both the "rocking-chair"-type mechanism that minimizes total electrolyte volume and the use of metal anodes, which have substantial merits in capacity and voltage. Self-discharge was also substantially alleviated compared to conventional supercapacitors. This concept offers a route to build supercapacitors that meet dual criteria of power and energy densities with a simple cell design.

Analysis of flow coefficient in chair manufacture

Directory of Open Access Journals (Sweden)

Ivković Dragoljub

2005-01-01

Full Text Available The delivery on time is not possible without the good-quality planning of deadlines, i.e. planning of the manufacturing process duration. The study of flow coefficient enables the realistic forecasting of the manufacturing process duration. This paper points to the significance of the study of flow coefficient on scientific basis so as to determine the terms of the end of the manufacture of chairs made of sawn timber. Chairs are the products of complex construction, often almost completely made of sawn timber as the basic material. They belong to the group of export products, so it is especially significant to analyze the duration of the production cycle, and the type and the degree of stoppages in this type of production. Parallel method of production is applied in chair manufacture. The study shows that the value of flow coefficient is close to one or higher, in most cases. The results indicate that the percentage of interoperational stoppage is unjustifiably high, so it is proposed how to decrease the percentage of stoppages in the manufacturing process.

Department Chairs' Perceptions of the Importance of Business Communication Skills.

Science.gov (United States)

Wardrope, William J.

2002-01-01

Determines business department chairs' ratings of topics typically covered in the business communication course. Indicates that department chairs perceive writing skills to be more important to business communication courses than other communication skills, such as speaking, technology-mediated communication, interpersonal communication,…

Advancing Women's Health and Women's Leadership With Endowed Chairs in Women's Health.

Science.gov (United States)

Carnes, Molly; Johnson, Paula; Klein, Wendy; Jenkins, Marjorie; Bairey Merz, C Noel

2017-02-01

Gender-based bias and conflation of gender and status are root causes of disparities in women's health care and the slow advancement of women to leadership in academic medicine. More than a quarter of women physicians train in internal medicine and its subspecialties, and women physicians almost exclusively constitute the women's health focus within internal medicine. Thus, internal medicine has considerable opportunity to develop women leaders in academic medicine and promote women's health equity.To probe whether holding an endowed chair-which confers status-in women's health may be an effective way to advance women leaders in academic medicine and women's health, the authors explored the current status of endowed chairs in women's health in internal medicine. They found that the number of these endowed chairs in North America increased from 7 in 2013 to 19 in 2015, and all were held by women. The perceptions of incumbents and other women's health leaders supported the premise that an endowed chair in women's health would increase women's leadership, the institutional stature of women's health, and activities in women's health research, education, and clinical care.Going forward, it will be important to explore why not all recipients perceived that the endowed chair enhanced their own academic leadership, whether providing women's health leaders with fundraising expertise fosters future success in increasing the number of women's health endowed chairs, and how the conflation of gender and status play out (e.g., salary differences between endowed chairs) as the number of endowed chairs in women's health increases.

New Content Addressable Memory (CAM) Technologies for Big Data and Intelligent Electronics Enabled by Magneto-Electric Ternary CAM

Science.gov (United States)

2017-12-11

AFRL-RY-WP-TR-2017-0198 NEW CONTENT ADDRESSABLE MEMORY (CAM) TECHNOLOGIES FOR BIG DATA AND INTELLIGENT ELECTRONICS ENABLED BY MAGNETO-ELECTRIC...MEMORY (CAM) TECHNOLOGIES FOR BIG DATA AND INTELLIGENT ELECTRONICS ENABLED BY MAGNETO-ELECTRIC TERNARY CAM 5a. CONTRACT NUMBER FA8650-16-1-7655 5b... electronic applications, such as internet of things, big data, wireless sensors, and mobile devices, have begun to focus on the importance of energy

76 FR 20651 - Environmental Management Site-Specific Advisory Board Chairs

Science.gov (United States)

2011-04-13

... DEPARTMENT OF ENERGY Environmental Management Site-Specific Advisory Board Chairs AGENCY... a meeting on April 13-14, 2011 of the Environmental Management Site-Specific Advisory Board Chairs... R. Butler, Acting Deputy Committee Management Officer. [FR Doc. 2011-8970 Filed 4-8-11; 4:15 pm...

Human Research Program 2010 Chair Standing Review Panel Meeting

Science.gov (United States)

Steinberg, Susan

2011-01-01

The 13 Human Research Program (HRP) Standing Review Panel (SRP) Chairs, and in some cases one or two additional panel members (see section XIV, roster) referred to as the Chair (+1) SRP throughout this document, met at the NASA Johnson Space Center (JSC) on December 7, 2010 to allow the HRP Elements and Projects to report on their progress over the past year, their current status, and their plans for the upcoming year based on NASA's current goals and objectives for human space exploration. A large focus of the meeting was also used to discuss integration across the HRP scientific disciplines based on a recommendation from the 2009 HRP SRP review. During the one-day meeting, each of the HRP Elements and Projects presented the changes they made to the HRP Integrated Research Plan (IRP Rev. B) over the last year, and what their top three areas of integration are between other HRP Elements/Projects. The Chair (+1) SRP spent sufficient time addressing the panel charge, either as a group or in a separate closed session, and the Chair (+1) SRP and the HRP presenters and observers, in most cases, had sufficient time to discuss during and after the presentations. The SRP made a final debriefing to the HRP Program Scientist, Dr. John B. Charles, prior to the close of the meeting on December 7, 2010. Overall, the Chair (+1) SRP concluded that most of the HRP Elements/Projects did a commendable job during the past year in addressing integration across the HRP scientific disciplines with the available resources. The Chair (+1) SRP agreed that the idea of integration between HRP Elements/Projects is noble, but believes all parties involved should have the same definition of integration, in order to be successful. The Chair (+1) SRP also believes that a key to successful integration is communication among the HRP Elements/Projects which may present a challenge. The Chair (+1) SRP recommends that the HRP have a workshop on program integration (with HRP Element

Immunomodulation of Autoimmune Arthritis by Herbal CAM

Directory of Open Access Journals (Sweden)

Shivaprasad H. Venkatesha

2011-01-01

Full Text Available Rheumatoid arthritis (RA is a debilitating autoimmune disease of global prevalence. The disease is characterized by synovial inflammation leading to cartilage and bone damage. Most of the conventional drugs used for the treatment of RA have severe adverse reactions and are quite expensive. Over the years, increasing proportion of patients with RA and other immune disorders are resorting to complementary and alternative medicine (CAM for their health needs. Natural plant products comprise one of the most popular CAM for inflammatory and immune disorders. These herbal CAM belong to diverse traditional systems of medicine, including traditional Chinese medicine, Kampo, and Ayurvedic medicine. In this paper, we have outlined the major immunological pathways involved in the induction and regulation of autoimmune arthritis and described various herbal CAM that can effectively modulate these immune pathways. Most of the information about the mechanisms of action of herbal products in the experimental models of RA is relevant to arthritis patients as well. The study of immunological pathways coupled with the emerging application of genomics and proteomics in CAM research is likely to provide novel insights into the mechanisms of action of different CAM modalities.

Seat pan and backrest pressure distribution while sitting in office chairs.

Science.gov (United States)

Zemp, Roland; Taylor, William R; Lorenzetti, Silvio

2016-03-01

Nowadays, an increasing amount of time is spent seated, especially in office environments, where sitting comfort and support are increasingly important due to the prevalence of musculoskeletal disorders. The aim of this study was to develop a methodology for chair-specific sensor mat calibration, to evaluate the interconnections between specific pressure parameters and to establish those that are most meaningful and significant in order to differentiate pressure distribution measures between office chairs. The shape of the exponential calibration function was highly influenced by the material properties and geometry of the office chairs, and therefore a chair-specific calibration proved to be essential. High correlations were observed between the eight analysed pressure parameters, whereby the pressure parameters could be reduced to a set of four and three parameters for the seat pan and the backrest respectively. In order to find significant differences between office chairs, gradient parameters should be analysed for the seat pan, whereas for the backrest almost all parameters are suitable. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Complementary and alternative medicine (CAM providers’ views of chronic low back pain patients’ expectations of CAM therapies: a qualitative study

Directory of Open Access Journals (Sweden)

Schafer Lisa M

2012-11-01

Full Text Available Abstract Background Some researchers think that patients with higher expectations for CAM therapies experience better outcomes and that enthusiastic providers can enhance treatment outcomes. This is in contrast to evidence suggesting conventional medical providers often reorient patient expectations to better match what providers believe to be realistic. However, there is a paucity of research on CAM providers’ views of their patients’ expectations regarding CAM therapy and the role of these expectations in patient outcomes. Methods To better understand how CAM providers view and respond to their patients’ expectations of a particular therapy, we conducted 32 semi-structured, qualitative interviews with acupuncturists, chiropractors, massage therapists and yoga instructors identified through convenience sampling. Interviews were recorded, transcribed and analyzed thematically using Atlas ti version 6.1. Results CAM providers reported that they attempt to ensure that their patients’ expectations are realistic. Providers indicated they manage their patients’ expectations in a number of domains— roles and responsibilities of providers and patients, treatment outcomes, timeframe for improvement, and treatment experience. Providers reported that patients’ expectations change over time and that they need to continually manage these expectations to enhance patient engagement and satisfaction with treatment. Conclusions Providers of four types of CAM therapies viewed patients’ expectations as an important component of their experiences with CAM therapy and indicated that they try to align patient expectations with reality. These findings suggest that CAM providers are similar in this respect to conventional medical providers.

Complementary and alternative medicine (CAM) providers' views of chronic low back pain patients' expectations of CAM therapies: a qualitative study.

Science.gov (United States)

Schafer, Lisa M; Hsu, Clarissa; Eaves, Emery Rose; Ritenbaugh, Cheryl; Turner, Judith; Cherkin, Daniel C; Sims, Colette; Sherman, Karen J

2012-11-27

Some researchers think that patients with higher expectations for CAM therapies experience better outcomes and that enthusiastic providers can enhance treatment outcomes. This is in contrast to evidence suggesting conventional medical providers often reorient patient expectations to better match what providers believe to be realistic. However, there is a paucity of research on CAM providers' views of their patients' expectations regarding CAM therapy and the role of these expectations in patient outcomes. To better understand how CAM providers view and respond to their patients' expectations of a particular therapy, we conducted 32 semi-structured, qualitative interviews with acupuncturists, chiropractors, massage therapists and yoga instructors identified through convenience sampling. Interviews were recorded, transcribed and analyzed thematically using Atlas ti version 6.1. CAM providers reported that they attempt to ensure that their patients' expectations are realistic. Providers indicated they manage their patients' expectations in a number of domains- roles and responsibilities of providers and patients, treatment outcomes, timeframe for improvement, and treatment experience. Providers reported that patients' expectations change over time and that they need to continually manage these expectations to enhance patient engagement and satisfaction with treatment. Providers of four types of CAM therapies viewed patients' expectations as an important component of their experiences with CAM therapy and indicated that they try to align patient expectations with reality. These findings suggest that CAM providers are similar in this respect to conventional medical providers.

Knowledge and training needs among Danish nurses about CAM

DEFF Research Database (Denmark)

Lunde, Anita

2010-01-01

to explore nurses’ knowledge about CAM and their needs for training. Methods: Similar to international investigations a Danish “CAM-knowledge” questionnaire was developed that included multiple choice, yes/no and 5 points scale answers. Validity was established through initial pilot testing. Contacts...... to a randomized sample of 2500 nurses were established through the Danish Nurses Foundation. The questionnaires were mailed by post with the possibility of anonymous return. The data material was analyzed using non-parametic methods. Results: The response rate was 67 % and 1458 completed questionnaires were...... of CAM also tend to have a theoretical background of CAM. Around 75 % of the nurses agree or partly agree that it is important for nurses to receive education about CAM and that nurses have knowledge about CAM that enables them to advise patients. Training needs concerning CAM were indicated by 52...

Joining forces to find answers — The International Research Chairs ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-10-08

Oct 8, 2010 ... Mobile Nav Footer Links ... the environment, and information technology hopes the new research program that ... Alper observes that the Canada Research Chairs program's success in achieving this goal provides one ... Like the Canada Research Chairs program, the IRCI emphasizes training students to ...

IPAD: A unique approach to government/industry cooperation for technology development and transfer

Science.gov (United States)

Fulton, Robert E.; Salley, George C.

1985-01-01

A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

Great auricular neuropraxia with beach chair position

Directory of Open Access Journals (Sweden)

Joshi M

2017-07-01

Full Text Available Minal Joshi,1 Ruth Cheng,2 Hattiyangadi Kamath,1 Joel Yarmush1 1Department of Anesthesiology, New York Methodist Hospital, New York, NY, USA; 2School of Medicine, St. George’s University, Grenada, West Indies Abstract: Shoulder arthroscopy has been shown to be the procedure of choice for many diagnostic and therapeutic interventions. Neuropraxia of the great auricular nerve (GAN is an uncommon complication of shoulder surgery, with the patient in the beach chair position. We report a case of great auricular neuropraxia associated with direct compression by a horseshoe headrest, used in routine positioning for uncomplicated shoulder surgery. In this case, an arthroscopic approach was taken, under regional anesthesia with sedation in the beach chair position. The GAN, a superficial branch of the cervical plexus, is vulnerable to neuropraxia due to its superficial anatomical location. We recommend that for the procedures of the beach chair position, the auricle be protected and covered with cotton and gauze to avoid direct compression and the position of the head and neck be checked and corrected frequently. Keywords: neuropraxia, anesthesia, arthroscopy, great auricular nerve

New product development: A batik multifunctional chair

Science.gov (United States)

Indrawati, Sri; Sukmaningsih, Nias

2017-11-01

The biggest challenge facing by Batik industry in ASEAN Economic Community (AEC) era is the greater number of fashion competitors both domestically and internationally. Based on that condition, the development of new product variants by considering product performance and price is needed. This research was conducted to develop batik products with a new target market. Products that being developed is batik multifunctional chair using integrated value engineering and analytic hierarchy process methods. This research has been done in several stages, ie. Information stage, creative stage, value analysis and product prototyping. The results of this research shows that the batik multifunctional chair product criteria are aesthetic (29%), multifunctional (34%) and ergonomic (37%). There are three new product design alternatives that successfully being developed. Based on value analysis, the product design alternatives that have the highest value is alternative design 2, the value is 2,37. The production cost for this design is Rp. 500.000,-. Alternative design 2 specification are using Mahoni wood, Batik parang rusak pattern with natural coloring process, can be used as table and fit with customer's body anthropometry. Then a batik multifunctional chair prototype is developed based on the best alternative design.

Treatment Preferences for CAM in Children with Chronic Pain

Directory of Open Access Journals (Sweden)

Jennie C. I. Tsao

2007-01-01

Full Text Available CAM therapies have become increasingly popular in pediatric populations. Yet, little is known about children's preferences for CAM. This study examined treatment preferences in chronic pediatric pain patients offered a choice of CAM therapies for their pain. Participants were 129 children (94 girls (mean age = 14.5 years ± 2.4; range = 8–18 years presenting at a multidisciplinary, tertiary clinic specializing in pediatric chronic pain. Bivariate and multivariate analyses were used to examine the relationships between CAM treatment preferences and patient's sociodemographic and clinical characteristics, as well as their self-reported level of functioning. Over 60% of patients elected to try at least one CAM approach for pain. The most popular CAM therapies were biofeedback, yoga and hypnosis; the least popular were art therapy and energy healing, with craniosacral, acupuncture and massage being intermediate. Patients with a diagnosis of fibromyalgia (80% were the most likely to try CAM versus those with other pain diagnoses. In multivariate analyses, pain duration emerged as a significant predictor of CAM preferences. For mind-based approaches (i.e. hypnosis, biofeedback and art therapy, pain duration and limitations in family activities were both significant predictors. When given a choice of CAM therapies, this sample of children with chronic pain, irrespective of pain diagnosis, preferred non-invasive approaches that enhanced relaxation and increased somatic control. Longer duration of pain and greater impairment in functioning, particularly during family activities increased the likelihood that such patients agreed to engage in CAM treatments, especially those that were categorized as mind-based modalities.

Treatment Preferences for CAM in children with chronic pain.

Science.gov (United States)

Tsao, Jennie C I; Meldrum, Marcia; Kim, Su C; Jacob, Margaret C; Zeltzer, Lonnie K

2007-09-01

CAM therapies have become increasingly popular in pediatric populations. Yet, little is known about children's preferences for CAM. This study examined treatment preferences in chronic pediatric pain patients offered a choice of CAM therapies for their pain. Participants were 129 children (94 girls) (mean age = 14.5 years +/- 2.4; range = 8-18 years) presenting at a multidisciplinary, tertiary clinic specializing in pediatric chronic pain. Bivariate and multivariate analyses were used to examine the relationships between CAM treatment preferences and patient's sociodemographic and clinical characteristics, as well as their self-reported level of functioning. Over 60% of patients elected to try at least one CAM approach for pain. The most popular CAM therapies were biofeedback, yoga and hypnosis; the least popular were art therapy and energy healing, with craniosacral, acupuncture and massage being intermediate. Patients with a diagnosis of fibromyalgia (80%) were the most likely to try CAM versus those with other pain diagnoses. In multivariate analyses, pain duration emerged as a significant predictor of CAM preferences. For mind-based approaches (i.e. hypnosis, biofeedback and art therapy), pain duration and limitations in family activities were both significant predictors. When given a choice of CAM therapies, this sample of children with chronic pain, irrespective of pain diagnosis, preferred non-invasive approaches that enhanced relaxation and increased somatic control. Longer duration of pain and greater impairment in functioning, particularly during family activities increased the likelihood that such patients agreed to engage in CAM treatments, especially those that were categorized as mind-based modalities.

CAMS: OLAPing Multidimensional Data Streams Efficiently

Science.gov (United States)

Cuzzocrea, Alfredo

In the context of data stream research, taming the multidimensionality of real-life data streams in order to efficiently support OLAP analysis/mining tasks is a critical challenge. Inspired by this fundamental motivation, in this paper we introduce CAMS (C ube-based A cquisition model for M ultidimensional S treams), a model for efficiently OLAPing multidimensional data streams. CAMS combines a set of data stream processing methodologies, namely (i) the OLAP dimension flattening process, which allows us to obtain dimensionality reduction of multidimensional data streams, and (ii) the OLAP stream aggregation scheme, which aggregates data stream readings according to an OLAP-hierarchy-based membership approach. We complete our analytical contribution by means of experimental assessment and analysis of both the efficiency and the scalability of OLAPing capabilities of CAMS on synthetic multidimensional data streams. Both analytical and experimental results clearly connote CAMS as an enabling component for next-generation Data Stream Management Systems.

Chick ex ovo culture and ex ovo CAM assay: how it really works.

Science.gov (United States)

Dohle, Daniel S; Pasa, Susanne D; Gustmann, Sebastian; Laub, Markus; Wissler, Josef H; Jennissen, Herbert P; Dünker, Nicole

2009-11-30

Chicken eggs in the early phase of breeding are between in vitro and in vivo systems and provide a vascular test environment not only to study angiogenesis but also to study tumorigenesis. After the chick chorioallantoic membrane (CAM) has developed, its blood vessel network can be easily accessed, manipulated and observed and therefore provides an optimal setting for angiogenesis assays. Since the lymphoid system is not fully developed until late stages of incubation, the chick embryo serves as a naturally immunodeficient host capable of sustaining grafted tissues and cells without species-specific restrictions. In addition to nurturing developing allo- and xenografts, the CAM blood vessel network provides a uniquely supportive environment for tumor cell intravasation, dissemination, and vascular arrest and a repository where arrested cells extravasate to form micro metastatic foci. For experimental purposes, in most of the recent studies the CAM was exposed by cutting a window through the egg shell and experiments were carried out in ovo, resulting in significant limitations in the accessibility of the CAM and possibilities for observation and photo documentation of effects. When shell-less cultures of the chick embryo were used(1-4), no experimental details were provided and, if published at all, the survival rates of these cultures were low. We refined the method of ex ovo culture of chick embryos significantly by introducing a rationally controlled extrusion of the egg content. These ex ovo cultures enhance the accessibility of the CAM and chick embryo, enabling easy in vivo documentation of effects and facilitating experimental manipulation of the embryo. This allows the successful application to a large number of scientific questions: (1) As an improved angiogenesis assay(5,6), (2) an experimental set up for facilitated injections in the vitreous of the chick embryo eye(7-9), (3) as a test environment for dissemination and intravasation of dispersed tumor

Perceptions of Interior Design Program Chairs Regarding Credentials for Faculty

Science.gov (United States)

Miller, Beth R.

2017-01-01

The purpose of this study was to determine whether program chairs in interior design have a preferred degree credential for candidates seeking a full-time, tenure-track position or other full-time position at their institution and to determine if there is a correlation between this preference and the program chair's university's demographics,…

The Weighing Chair of Sanctorius Sanctorius: A Replica.

Science.gov (United States)

Hollerbach, Teresa

2018-05-14

In 1614, the physician Sanctorius Sanctorius (1561-1636) published his most famous work entitled Ars […] de statica medicina (On static medicine). This is a work composed of aphorisms that present the practical results of a series of weighing procedures, rather than theoretical observations. De statica medicina is the result of a large number of test series that Sanctorius carried out over many years with the weighing chair he constructed himself in order to quantify the so-called perspiratio insensibilis, an insensible perspiration of the human body. Through his weighing experiments, Sanctorius introduced the idea of quantitative research into physiology. Although historical accounts ascribe an important role to Sanctorius as the founder of a new medical science, up until now the design of his weighing chair and the method of measurement have not been closely analysed. The aim of this paper is to close this gap. Through a collaboration between the Max Planck Institute for the History of Science and the Technical University of Berlin (Institute of Vocational Education and Work Studies), Sanctorius's weighing chair was reconstructed and experiments carried out with it. This opened new perspectives on Sanctorius's work and led to a reconsideration of the function and purpose of his weighing chair. With his static medicine, Sanctorius repurposed an old instrument. The replication of the weighing chair and the repetition of the experiments demonstrate that this novel application of scales posed some challenges for the mechanical design of the instrument. We recognized that the instrument fulfilled different functions that might in turn have affected its design, precision, and the measuring method applied. Although in the end we could not clarify how Sanctorius actually conducted his measurements, we were nevertheless able to develop an understanding of Sanctorius's mechanical and practical knowledge that would not have been possible for us to develop solely on

Gender differences in autobiographical memory for everyday events: retrieval elicited by SenseCam images versus verbal cues.

Science.gov (United States)

St Jacques, Peggy L; Conway, Martin A; Cabeza, Roberto

2011-10-01

Gender differences are frequently observed in autobiographical memory (AM). However, few studies have investigated the neural basis of potential gender differences in AM. In the present functional MRI (fMRI) study we investigated gender differences in AMs elicited using dynamic visual images vs verbal cues. We used a novel technology called a SenseCam, a wearable device that automatically takes thousands of photographs. SenseCam differs considerably from other prospective methods of generating retrieval cues because it does not disrupt the ongoing experience. This allowed us to control for potential gender differences in emotional processing and elaborative rehearsal, while manipulating how the AMs were elicited. We predicted that males would retrieve more richly experienced AMs elicited by the SenseCam images vs the verbal cues, whereas females would show equal sensitivity to both cues. The behavioural results indicated that there were no gender differences in subjective ratings of reliving, importance, vividness, emotion, and uniqueness, suggesting that gender differences in brain activity were not due to differences in these measures of phenomenological experience. Consistent with our predictions, the fMRI results revealed that males showed a greater difference in functional activity associated with the rich experience of SenseCam vs verbal cues, than did females.

Chiropractic and CAM utilization: a descriptive review.

Science.gov (United States)

Lawrence, Dana J; Meeker, William C

2007-01-22

To conduct a descriptive review of the scientific literature examining use rates of modalities and procedures used by CAM clinicians to manage chronic LBP and other conditions A literature of PubMed and MANTIS was performed using the key terms Chiropractic; Low Back Pain; Utilization Rate; Use Rate; Complementary and Alternative Medicine; and Health Services in various combinations. A total of 137 papers were selected, based upon including information about chiropractic utilization, CAM utilization and low back pain and other conditions. Information was extracted from each paper addressing use of chiropractic and CAM, and is summarized in tabular form. Thematic analysis of the paper topics indicated that there were 5 functional areas covered by the literature: back pain papers, general chiropractic papers, insurance-related papers, general CAM-related papers; and worker's compensation papers. Studies looking at chiropractic utilization demonstrate that the rates vary, but generally fall into a range from around 6% to 12% of the population, most of whom seek chiropractic care for low back pain and not for organic disease or visceral dysfunction. CAM is itself used by people suffering from a variety of conditions, though it is often used not as a primary intervention, but rather as an additional form of care. CAM and chiropractic often offer lower costs for comparable results compared to conventional medicine.

Cardiovascular consequence of reclining vs. sitting beach-chair body position for induction of anesthesia

DEFF Research Database (Denmark)

Larsen, Soren L.; Lyngeraa, Tobias S.; Maschmann, Christian P.

2014-01-01

The sitting beach-chair position is regularly used for shoulder surgery and anesthesia may be induced in that position. We tested the hypothesis that the cardiovascular challenge induced by induction of anesthesia is attenuated if the patient is placed in a reclining beach-chair position....... Anesthesia was induced with propofol in the sitting beach-chair (n = 15) or with the beach-chair tilted backwards to a reclining beach-chair position (n = 15). The last group was stepwise tilted to the sitting beach-chair position prior to surgery. Hypotension was treated with ephedrine. Continuous...... ± 12 vs. 45 ± 15 % reduction from baseline, p = 0.04) and ScO2 (7 ± 6 vs. 1 ± 8% increase from baseline, p = 0.02) and received less ephedrine (mean: 4 vs. 13 mg, p = 0.048). The higher blood pressure and lower need of vasopressor following induction of anesthesia in the reclining compared...

CAD/CAM produces dentures with improved fit.

Science.gov (United States)

Steinmassl, Otto; Dumfahrt, Herbert; Grunert, Ingrid; Steinmassl, Patricia-Anca

2018-02-22

Resin polymerisation shrinkage reduces the congruence of the denture base with denture-bearing tissues and thereby decreases the retention of conventionally fabricated dentures. CAD/CAM denture manufacturing is a subtractive process, and polymerisation shrinkage is not an issue anymore. Therefore, CAD/CAM dentures are assumed to show a higher denture base congruence than conventionally fabricated dentures. It has been the aim of this study to test this hypothesis. CAD/CAM dentures provided by four different manufacturers (AvaDent, Merz Dental, Whole You, Wieland/Ivoclar) were generated from ten different master casts. Ten conventional dentures (pack and press, long-term heat polymerisation) made from the same master casts served as control group. The master casts and all denture bases were scanned and matched digitally. The absolute incongruences were measured using a 2-mm mesh. Conventionally fabricated dentures showed a mean deviation of 0.105 mm, SD = 0.019 from the master cast. All CAD/CAM dentures showed lower mean incongruences. From all CAD/CAM dentures, AvaDent Digital Dentures showed the highest congruence with the master cast surface with a mean deviation of 0.058 mm, SD = 0.005. Wieland Digital Dentures showed a mean deviation of 0.068 mm, SD = 0.005, Whole You Nexteeth prostheses showed a mean deviation of 0.074 mm, SD = 0.011 and Baltic Denture System prostheses showed a mean deviation of 0.086 mm, SD = 0.012. CAD/CAM produces dentures with better fit than conventional dentures. The present study explains the clinically observed enhanced retention and lower traumatic ulcer-frequency in CAD/CAM dentures.

Engine testing of ceramic cam-roller followers

Energy Technology Data Exchange (ETDEWEB)

Kalish, Y. (Detroit Diesel Corp., MI (United States))

1992-04-01

For several years, DDC has been developing monolithic ceramic heat engine components. One of the components, developed for an application in our state-of-the-art on-highway, heavy-duty diesel engine, the Series 60, is a silicon nitride cam-roller follower. Prior to starting this program, each valve train component in the Series 60 was considered for conversion to a ceramic material. Many advantages and disadvantages (benefits and risks) were considered. From this effort, one component was selected, the cam-roller follower. Using a system design approach, a ceramic cam-roller follower offered functional improvement at a reasonable cost. The purpose of the project was to inspect and test 100 domestically produced silicon nitride cam-roller followers built to the requirements of the DDC series 60 engine.

Availability Analysis of the Ventilation Stack CAM Interlock System

International Nuclear Information System (INIS)

YOUNG, J.

2000-01-01

Ventilation Stack Continuous Air Monitor (CAM) Interlock System failure modes, failure frequencies and system availability have been evaluated for the RPP. The evaluation concludes that CAM availability is as high as assumed in the safety analysis and that the current routine system surveillance is adequate to maintain this availability. Further, requiring an alarm to actuate upon CAM failure is not necessary to maintain the availability credited in the safety analysis, nor is such an arrangement predicted to significantly improve system availability. However, if CAM failures were only detected by the 92-day functional tests required in the Authorization Basis (AB), CAM availability would be much less than that credited in the safety analysis. Therefore it is recommended that the current surveillance practice of daily simple system checks, 30-day source checks and 92-day functional tests be continued in order to maintain CAM availability

Medical Ethnobotany in Europe: From Field Ethnography to a More Culturally Sensitive Evidence-Based CAM?

Directory of Open Access Journals (Sweden)

Cassandra L. Quave

2012-01-01

Full Text Available European folk medicine has a long and vibrant history, enriched with the various documented uses of local and imported plants and plant products that are often unique to specific cultures or environments. In this paper, we consider the medicoethnobotanical field studies conducted in Europe over the past two decades. We contend that these studies represent an important foundation for understanding local small-scale uses of CAM natural products and allow us to assess the potential for expansion of these into the global market. Moreover, we discuss how field studies of this nature can provide useful information to the allopathic medical community as they seek to reconcile existing and emerging CAM therapies with conventional biomedicine. This is of great importance not only for phytopharmacovigilance and managing risk of herb-drug interactions in mainstream patients that use CAM, but also for educating the medical community about ethnomedical systems and practices so that they can better serve growing migrant populations. Across Europe, the general status of this traditional medical knowledge is at risk due to acculturation trends and the urgency to document and conserve this knowledge is evident in the majority of the studies reviewed.

Medical Ethnobotany in Europe: From Field Ethnography to a More Culturally Sensitive Evidence-Based CAM?

Science.gov (United States)

Quave, Cassandra L.; Pardo-de-Santayana, Manuel; Pieroni, Andrea

2012-01-01

European folk medicine has a long and vibrant history, enriched with the various documented uses of local and imported plants and plant products that are often unique to specific cultures or environments. In this paper, we consider the medicoethnobotanical field studies conducted in Europe over the past two decades. We contend that these studies represent an important foundation for understanding local small-scale uses of CAM natural products and allow us to assess the potential for expansion of these into the global market. Moreover, we discuss how field studies of this nature can provide useful information to the allopathic medical community as they seek to reconcile existing and emerging CAM therapies with conventional biomedicine. This is of great importance not only for phytopharmacovigilance and managing risk of herb-drug interactions in mainstream patients that use CAM, but also for educating the medical community about ethnomedical systems and practices so that they can better serve growing migrant populations. Across Europe, the general status of this traditional medical knowledge is at risk due to acculturation trends and the urgency to document and conserve this knowledge is evident in the majority of the studies reviewed. PMID:22899952

A Profile of Academic Training Program Directors and Chairs in Radiation Oncology

International Nuclear Information System (INIS)

Wilson, Lynn D.; Haffty, Bruce G.; Smith, Benjamin D.

2013-01-01

Purpose: To identify objective characteristics and benchmarks for program leadership in academic radiation oncology. Methods and Materials: A study of the 87 Accreditation Council for Graduate Medical Education radiation oncology training program directors (PD) and their chairs was performed. Variables included age, gender, original training department, highest degree, rank, endowed chair assignment, National Institutes of Health (NIH) funding, and Hirsch index (H-index). Data were gathered from online sources such as departmental websites, NIH RePORTER, and Scopus. Results: There were a total of 87 PD. The median age was 48, and 14 (16%) were MD/PhD. A total of 21 (24%) were female, and rank was relatively equally distributed above instructor. Of the 26 professors, at least 7 (27%) were female. At least 24 (28%) were working at the institution from which they had received their training. A total of 6 individuals held endowed chairs. Only 2 PD had active NIH funding in 2012. The median H-index was 12 (range, 0-51) but the index dropped to 9 (range, 0-38) when those who served as both PD and chair were removed from the group. A total of 76 chairs were identified at the time of the study. The median age was 55, and 9 (12%) were MD/PhD. A total of 7 (9%) of the chairs were female, and rank was professor for all with the exception of 1 who was listed as “Head” and was an associate professor. Of the 76 chairs, at least 10 (13%) were working at the institution from which they received their training. There were a total of 21 individuals with endowed chairs. A total of 13 (17%) had NIH funding in 2012. The median H-index was 29 (range, 3-60). Conclusions: These data provide benchmarks for individuals and departments evaluating leadership positions in the field of academic radiation oncology. Such data are useful for evaluating leadership trends over time and comparing academic radiation oncology with other specialties

A Profile of Academic Training Program Directors and Chairs in Radiation Oncology

Energy Technology Data Exchange (ETDEWEB)

Wilson, Lynn D., E-mail: Lynn.wilson@yale.edu [Department of Therapeutic Radiology, Yale University School of Medicine, Smilow Cancer Hospital, New Haven, Connecticut (United States); Haffty, Bruce G. [Department of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Smith, Benjamin D. [Department of Radiation Oncology, UMDNJ-RWJMS, Cancer Institute of New Jersey, New Brunswick, New Jersey (United States)

2013-04-01

Purpose: To identify objective characteristics and benchmarks for program leadership in academic radiation oncology. Methods and Materials: A study of the 87 Accreditation Council for Graduate Medical Education radiation oncology training program directors (PD) and their chairs was performed. Variables included age, gender, original training department, highest degree, rank, endowed chair assignment, National Institutes of Health (NIH) funding, and Hirsch index (H-index). Data were gathered from online sources such as departmental websites, NIH RePORTER, and Scopus. Results: There were a total of 87 PD. The median age was 48, and 14 (16%) were MD/PhD. A total of 21 (24%) were female, and rank was relatively equally distributed above instructor. Of the 26 professors, at least 7 (27%) were female. At least 24 (28%) were working at the institution from which they had received their training. A total of 6 individuals held endowed chairs. Only 2 PD had active NIH funding in 2012. The median H-index was 12 (range, 0-51) but the index dropped to 9 (range, 0-38) when those who served as both PD and chair were removed from the group. A total of 76 chairs were identified at the time of the study. The median age was 55, and 9 (12%) were MD/PhD. A total of 7 (9%) of the chairs were female, and rank was professor for all with the exception of 1 who was listed as “Head” and was an associate professor. Of the 76 chairs, at least 10 (13%) were working at the institution from which they received their training. There were a total of 21 individuals with endowed chairs. A total of 13 (17%) had NIH funding in 2012. The median H-index was 29 (range, 3-60). Conclusions: These data provide benchmarks for individuals and departments evaluating leadership positions in the field of academic radiation oncology. Such data are useful for evaluating leadership trends over time and comparing academic radiation oncology with other specialties.

Trapezius Muscle Activity in using Ordinary and Ergonomically Designed Dentistry Chairs

Directory of Open Access Journals (Sweden)

O Haddad

2012-03-01

Full Text Available Background: Most dentists complain of musculoskeletal disorders which can be caused by prolonged static posture, lack of suitable rest and other physical and psychological problems. Objective: We evaluated a chair with a new ergonomic design which incorporated forward leaning chest and arm supports. Methods: The chair was evaluated in the laboratory during task simulation and EMG analysis on 12 students and subjectively assessed by 30 professional dentists using an 18-item questionnaire. EMG activity of right and left trapezius muscles for 12 male students with no musculoskeletal disorders was measured while simulating common tasks like working on the teeth of the lower jaw. Results: Normalized EMG data showed significant reduction (p<0.05 in all EMG recordings of the trapezius muscle. Dentists also unanimously preferred the ergonomically designed chair. Conclusion: Such ergonomically designed chairs should be introduced as early as possible in student training before bad postural habits are acquired.

Quality Improvement Practices in Academic Emergency Medicine: Perspectives from the Chairs

Directory of Open Access Journals (Sweden)

DelliFraine, Jami L

2010-12-01

Full Text Available Objective: To assess academic emergency medicine (EM chairs’ perceptions of quality improvement (QI training programs.Methods: A voluntary anonymous 20 item survey was distributed to a sample of academic chairs of EM through the Association of Academic Chairs of Emergency Medicine. Data was collected to assess the percentage of academic emergency physicians who had received QI training, the type of training they received, their perception of the impact of this training on behavior, practice and outcomes, and any perceived barriers to implementing QI programs in the emergency department.Results: The response rate to the survey was 69% (N = 59. 59.3% of respondents report that their hospital has a formal QI program for physicians. Chairs received training in a variety of QI programs. The type of QI program used by respondents was perceived as having no impact on goals achieved by QI (χ2 = 12.382; p = 0.260, but there was a statistically significant (χ2 = 14.383; p = 0.006 relationship between whether or not goals were achieved and academic EM chairs’ perceptions about return on investment for QI training. Only 22% of chairs responded that they have already made changes as a result of the QI training. 78.8% of EM chairs responded that quality programs could have a significant positive impact on their practice and the healthcare industry. Chairs perceived that QI programs had the most potential value in the areas of understanding and reducing medical errors and improving patient flow and throughput. Other areas of potential value of QI include improving specific clinical indicators and standardizing physician care.Conclusion: Academic EM chairs perceived that QI programs were an effective way to drive needed improvements. The results suggest that there is a high level of interest in QI but a low level of adoption of training and implementation.[West J Emerg Med. 2010; 11(5:479-485.

Laia de Camões — O épico

Directory of Open Access Journals (Sweden)

Lygia Alvares Correa

1951-06-01

Full Text Available CIDADE ('liernatii. Laia de Camões — O épico, Revista da Faculdade  de Letras. Tomo XVI. 2.°' série. ns. I e 2. Universidade de Lisboa  1950. (Primeiro Parágrafo do Artigo Este segundo volume que a respeito de Camões escreve o Prof. Cidade surge 14 anos após, "Luiz de Camões".

Chiropractic and CAM Utilization: A Descriptive Review

Directory of Open Access Journals (Sweden)

Meeker William C

2007-01-01

Full Text Available Abstract Objective To conduct a descriptive review of the scientific literature examining use rates of modalities and procedures used by CAM clinicians to manage chronic LBP and other conditions Data Sources A literature of PubMed and MANTIS was performed using the key terms Chiropractic; Low Back Pain; Utilization Rate; Use Rate; Complementary and Alternative Medicine; and Health Services in various combinations. Data Selection A total of 137 papers were selected, based upon including information about chiropractic utilization, CAM utilization and low back pain and other conditions. Data Synthesis Information was extracted from each paper addressing use of chiropractic and CAM, and is summarized in tabular form. Results Thematic analysis of the paper topics indicated that there were 5 functional areas covered by the literature: back pain papers, general chiropractic papers, insurance-related papers, general CAM-related papers; and worker's compensation papers. Conclusion Studies looking at chiropractic utilization demonstrate that the rates vary, but generally fall into a range from around 6% to 12% of the population, most of whom seek chiropractic care for low back pain and not for organic disease or visceral dysfunction. CAM is itself used by people suffering from a variety of conditions, though it is often used not as a primary intervention, but rather as an additional form of care. CAM and chiropractic often offer lower costs for comparable results compared to conventional medicine.

Genomic analyses of the CAM plant pineapple.

Science.gov (United States)

Zhang, Jisen; Liu, Juan; Ming, Ray

2014-07-01

The innovation of crassulacean acid metabolism (CAM) photosynthesis in arid and/or low CO2 conditions is a remarkable case of adaptation in flowering plants. As the most important crop that utilizes CAM photosynthesis, the genetic and genomic resources of pineapple have been developed over many years. Genetic diversity studies using various types of DNA markers led to the reclassification of the two genera Ananas and Pseudananas and nine species into one genus Ananas and two species, A. comosus and A. macrodontes with five botanical varieties in A. comosus. Five genetic maps have been constructed using F1 or F2 populations, and high-density genetic maps generated by genotype sequencing are essential resources for sequencing and assembling the pineapple genome and for marker-assisted selection. There are abundant expression sequence tag resources but limited genomic sequences in pineapple. Genes involved in the CAM pathway has been analysed in several CAM plants but only a few of them are from pineapple. A reference genome of pineapple is being generated and will accelerate genetic and genomic research in this major CAM crop. This reference genome of pineapple provides the foundation for studying the origin and regulatory mechanism of CAM photosynthesis, and the opportunity to evaluate the classification of Ananas species and botanical cultivars. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Effectiveness of Ergonomic Chair against Musculoskeletal Disorders in Female Batik Workers of Sragen District

Directory of Open Access Journals (Sweden)

Sumardiyono Sumardiyono

2014-08-01

Full Text Available The majority of female batik workers uses non-ergonomic chairs (dingklik that pose risks of musculoskeletal disorders. This study aimed to design an ergonomic chair and evaluate its effectiveness in reducing musculoskeletal disorders among the workers. This is a quasi-experimental study (using one group pre and post-test design on 50 female batik workers selected by quota sampling. Musculoskeletal disorders were measured among the samples before and after the use of the designed ergonomic chair which they were asked to use for two months. T-test, ANCOVA, Wilcoxon test, McNemar test and Chi Square test were used for the analysis. The study found statistical significant differences of risk factor against musculoskeletal disorders among the workers before and after their use of the designed ergonomic chair (p=0.000; and of musculoskeletal disorders before and after using the ergonomic chair (p= 0,035. Body Mass Index (BMI was identified as a confounding factor, and statistical significant difference of musculoskeletal disorders were also found among the workers with 25 BMI even before and after using the ergonomic chair (p=0.033 and p=0.015 respectively. By ANCOVA statistical test, after controlling BMI, another statistical difference of musculoskeletal disorders was also identified before and after using the ergonomic chair (p=0.033. It is concluded that the designed ergonomic chair is effective to reduce the risk of musculoskeletal disorders.

Camshaft bearing arrangement for overhead cam engine

Energy Technology Data Exchange (ETDEWEB)

Yoshikawa, M.

1985-01-01

In an assembly for an internal combustion engine comprising a cylinder block, a cylinder head detachably affixed to the cylinder block by a plurality of threaded fastening means, a plurality of poppet valves supported for reciprocation in the cylinder head and a camshaft for operating the poppet valves, the improvement is described comprising a cam carrier detachably affixed to the cylinder head and overlying the threaded fastening means, and a bearing cap affixed to the cam carrier. The cam carrier and the bearing cap have bearing surfaces for journaling the camshaft.

A Novel Radiation Hardened CAM

CERN Document Server

Shojaii, Seyed Ruhollah; The ATLAS collaboration

2018-01-01

This poster describes an innovative Content Addressable Memory cell with radiation hardened (RH-CAM) architecture. The RH-CAM is designed in a commercial 28 nm CMOS technology. The circuit has been simulated in worst-case conditions, and the effects due to single particles are analyzed injecting a fault current into a circuit node. The proposed architecture can perform on-time pattern recognition tasks in harsh environments, such as very front-end electronics in hadron colliders and in space applications.

Holy Ghost chair. An adaptation of the Kartell/Stark Louis ghost chair

OpenAIRE

Dean, Lionel T.

2006-01-01

The project was a commission from Fast UK and Folly with funding from the Arts Council. I was invited by Fast UK to submit a proposal for the exhibition Perimeters, Boundaries, and Borders based on my track record in digital design and manufacturing. I received a £2000 commission. Added to this I received Industrial support in kind from UK Rapid Prototyping bureau 3T RPD who produced two chairs for the exhibition. As with previous FutureFactories work the design created was a Meta desig...

design analysis of cam-follower system for beat up motion

African Journals Online (AJOL)

User

A cam swing roller-follower mechanism is designed for the beat-up motion of a horizontal narrow loom. The system consists of a radial plate-cam driven by a camshaft keyed to the plate cam. A slay bar which act as the beater is attached to the radial swing roller-follower and assembled on the plate cam. A continuous ...

Cam Drive Step Mechanism of a Quadruped Robot

Directory of Open Access Journals (Sweden)

Qun Sun

2014-01-01

Full Text Available Bionic quadruped robots received considerable worldwide research attention. For a quadruped robot walking with steady paces on a flat terrain, using a cam drive control mechanism instead of servomotors provides theoretical and practical benefits as it reduces the system weight, cost, and control complexities; thus it may be more cost beneficial for some recreational or household applications. This study explores the robot step mechanism including the leg and cam drive control systems based on studying the bone structure and the kinematic step sequences of dog. The design requirements for the cam drive robot legs have been raised, and the mechanical principles of the leg operating mechanism as well as the control parameters have been analyzed. A cam drive control system was constructed using three cams to control each leg. Finally, a four-leg demo robot was manufactured for experiments and it showed stable walking patterns on a flat floor.

Decision-Making Styles of Department Chairs at Public Jordanian Universities: A High-Expectancy Workforce

Science.gov (United States)

Khasawneh, Samer; Alomari, Aiman; Abu-tineh, Abdullah

2011-01-01

The primary purpose of this study was to determine the decision-making styles of department chairs employed by three public institutions in Jordan. A total of 95 department chairs participated in the study by completing the General Decision-Making Styles survey. The results indicated that department chairs under study have the rational…

Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children

Science.gov (United States)

Funatsu, Kyotaro; Xiong, Jinghong; Rosyidi, Cucuk Nur

2015-01-01

Rearranging furniture in elementary school classrooms encourages classroom activities. In elementary schools in Indonesia and some other developing countries, usually only one style of furniture is used for all children, and the furniture is heavy and oversized for younger children. This affects their ability to carry it. The objective of this study is to investigate the effects of elementary school furniture weight and children’s age on performance of three carrying tasks (carrying a chair, lifting and turning a chair on a desk, and carrying both a chair and a desk together), from the ergonomics point of view. A total of 42 schoolchildren (ages 6–9; 17 Indonesian, 25 Japanese) participated in this study. Two types of Japanese chairs (Chair A and B, weight: 3.2 kg and 3.9 kg), one type of Indonesian chair (Chair C, weight: 5.0 kg), and two types of desks (height: 58 cm and 68 cm) were used. Indonesian chairs took significantly longer time to carry than the two Japanese chairs, and there was a significant negative relationship between age and task time for Chairs B and C, but not Chair A. Success rates for lifting and turning the chair declined as age decreased and chair weight increased, but were not significantly influenced by desk height. Success rates for carrying a chair and desk together significantly decreased with heavier furniture. Children aged six showed an extremely low success rate in almost all conditions. In conclusion, children’s ability to carry furniture is affected by their age and furniture characteristics, especially weight. In order to encourage classroom activities in elementary school, school furniture should be of appropriate weight. Supervision for younger children is required during classroom furniture arrangement. PMID:26053154

Leadership Experiences and Characteristics of Chairs of Academic Departments of Psychiatry

Science.gov (United States)

Keith, Samuel J.; Buckley, Peter F.

2011-01-01

Objective: Effective leadership in academic medicine requires a broad constellation of skills, experiences, and core values. The authors sought to describe and define these. Method: The authors conducted a web-based survey among 132 Chairs of North American departments of psychiatry. Results: Eighty-five Chairs (64%) responded to the survey, the…

Introduction to Analytical Methods for Internal Combustion Engine Cam Mechanisms

CERN Document Server

Williams, J J

2013-01-01

Modern design methods of Automotive Cam Design require the computation of a range of parameters. This book provides a logical sequence of steps for the derivation of the relevant equations from first principles, for the more widely used cam mechanisms. Although originally derived for use in high performance engines, this work is equally applicable to the design of mass produced automotive and other internal combustion engines.   Introduction to Analytical Methods for Internal Combustion Engine Cam Mechanisms provides the equations necessary for the design of cam lift curves with an associated smooth acceleration curve. The equations are derived for the kinematics and kinetics of all the mechanisms considered, together with those for cam curvature and oil entrainment velocity. This permits the cam shape, all loads, and contact stresses to be evaluated, and the relevant tribology to be assessed. The effects of asymmetry on the manufacture of cams for finger follower and offset translating curved followers is ...

Finding the Evidence in CAM: a Student's Perspective

Directory of Open Access Journals (Sweden)

Jeffrey Ghassemi

2005-01-01

Full Text Available This commentary offers a future health care provider's perspective on the role of complementary and alternative medicine (CAM in Western (namely, in US medical education and practice. As a student of both public health and medicine in the United States, Jeffrey Ghassemi is interested in CAM's contribution to improving medical practice and teaching. The commentary highlights the ambiguous definitions of CAM to Westerners despite the rising popularity of and expenditures for alternative modalities of care. It then argues for collaboration between alternative and established medical communities to ascertain the scientific merits of CAM. It concludes by calling for a new medical paradigm that embraces the philosophies of both communities to advance education and patient care.

Use of Complementary and Alternative Medicine (CAM) as Part of the Oncological Treatment: Survey about Patients' Attitude towards CAM in a University-Based Oncology Center in Germany.

Science.gov (United States)

Kessel, Kerstin A; Lettner, Sabrina; Kessel, Carmen; Bier, Henning; Biedermann, Tilo; Friess, Helmut; Herrschbach, Peter; Gschwend, Jürgen E; Meyer, Bernhard; Peschel, Christian; Schmid, Roland; Schwaiger, Markus; Wolff, Klaus-Dietrich; Combs, Stephanie E

2016-01-01

To understand if and which patients would be open-minded to Complementary and Alternative Medicine (CAM) use parallel to their oncological treatment. Moreover, we sought to determine which methods are most accepted and which are the primary motivators to use CAM. We developed and anonymously conducted a questionnaire for patients in the oncology center (TU Munich). Questions focus on different CAM methods, previous experiences, and willingness to apply or use CAM when offered in a university-based setting. A total of 171 of 376 patients (37.4% women, 62.0% men, 0.6% unknown) participated. This corresponds to a return rate of 45%. Median age was 64 years (17-87 years). Of all participants, 15.2% used CAM during their oncological therapy; 32.7% have used it in the past. The majority (81.9%) was not using CAM during therapy; 55.5% have not used CAM in the past respectively. The analysis revealed a significant correlation between education and CAM use during therapy (r = 0.18; p = 0.02), and CAM use in the past (r = 0.17; p = 0.04). Of all patients using CAM during therapy, favored methods were food supplements (42.3%), vitamins/minerals (42.3%), massage (34.6%). Motivations are especially the reduction of side effect and stress, the positive effect of certain CAM-treatments on the immune system and tumor therapy. Results showed no difference between women and men. Most patients not having had any experience with CAM complain about the deficiency of information by their treating oncologist (31.4%) as well as missing treatment possibilities (54.3%). Since many patients believe in study results demonstrating the efficacy of CAM, it stresses our task to develop innovative study protocols to investigate the outcomes of certain CAM on symptom reduction or other endpoints. Thus, prospective trials and innovative evidence-based treatment concepts to include CAM into high-end oncology is what patients demand and what a modern oncology center should offer.

Use of Complementary and Alternative Medicine (CAM as Part of the Oncological Treatment: Survey about Patients' Attitude towards CAM in a University-Based Oncology Center in Germany.

Directory of Open Access Journals (Sweden)

Kerstin A Kessel

Full Text Available To understand if and which patients would be open-minded to Complementary and Alternative Medicine (CAM use parallel to their oncological treatment. Moreover, we sought to determine which methods are most accepted and which are the primary motivators to use CAM.We developed and anonymously conducted a questionnaire for patients in the oncology center (TU Munich. Questions focus on different CAM methods, previous experiences, and willingness to apply or use CAM when offered in a university-based setting.A total of 171 of 376 patients (37.4% women, 62.0% men, 0.6% unknown participated. This corresponds to a return rate of 45%. Median age was 64 years (17-87 years. Of all participants, 15.2% used CAM during their oncological therapy; 32.7% have used it in the past. The majority (81.9% was not using CAM during therapy; 55.5% have not used CAM in the past respectively. The analysis revealed a significant correlation between education and CAM use during therapy (r = 0.18; p = 0.02, and CAM use in the past (r = 0.17; p = 0.04. Of all patients using CAM during therapy, favored methods were food supplements (42.3%, vitamins/minerals (42.3%, massage (34.6%. Motivations are especially the reduction of side effect and stress, the positive effect of certain CAM-treatments on the immune system and tumor therapy. Results showed no difference between women and men. Most patients not having had any experience with CAM complain about the deficiency of information by their treating oncologist (31.4% as well as missing treatment possibilities (54.3%.Since many patients believe in study results demonstrating the efficacy of CAM, it stresses our task to develop innovative study protocols to investigate the outcomes of certain CAM on symptom reduction or other endpoints. Thus, prospective trials and innovative evidence-based treatment concepts to include CAM into high-end oncology is what patients demand and what a modern oncology center should offer.

Musculoskeletal discomfort during VDU tasks; input for a smart office chair

NARCIS (Netherlands)

Commissaris, D.A.C.M.; Blok, M.; Bosch, T.; Konemann, R.; Bronkhorst, R.

2008-01-01

TNO and BMA Ergonomics are developing a so-called smart office chair. This chair is supposed to provide feedback on postures and movements during seated office work. The feedback should enable the user (i.e. the worker doing VDU tasks) to perform his or her work with less discomfort and in a more

International Research Chairs Initiative | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

The International Research Chairs Initiative (IRCI) is a seven-year, CA$8 million research program that pairs top research talent from universities in Canada with their counterparts in developing countries to address key ... The results of this joint effort: world-class discoveries and healthier, wealthier, fairer societies.

An open CAM system for dentistry on the basis of China-made 5-axis simultaneous contouring CNC machine tool and industrial CAM software.

Science.gov (United States)

Lu, Li; Liu, Shusheng; Shi, Shenggen; Yang, Jianzhong

2011-10-01

China-made 5-axis simultaneous contouring CNC machine tool and domestically developed industrial computer-aided manufacture (CAM) technology were used for full crown fabrication and measurement of crown accuracy, with an attempt to establish an open CAM system for dental processing and to promote the introduction of domestic dental computer-aided design (CAD)/CAM system. Commercially available scanning equipment was used to make a basic digital tooth model after preparation of crown, and CAD software that comes with the scanning device was employed to design the crown by using domestic industrial CAM software to process the crown data in order to generate a solid model for machining purpose, and then China-made 5-axis simultaneous contouring CNC machine tool was used to complete machining of the whole crown and the internal accuracy of the crown internal was measured by using 3D-MicroCT. The results showed that China-made 5-axis simultaneous contouring CNC machine tool in combination with domestic industrial CAM technology can be used for crown making and the crown was well positioned in die. The internal accuracy was successfully measured by using 3D-MicroCT. It is concluded that an open CAM system for dentistry on the basis of China-made 5-axis simultaneous contouring CNC machine tool and domestic industrial CAM software has been established, and development of the system will promote the introduction of domestically-produced dental CAD/CAM system.

The pineapple genome and the evolution of CAM photosynthesis.

Science.gov (United States)

Ming, Ray; VanBuren, Robert; Wai, Ching Man; Tang, Haibao; Schatz, Michael C; Bowers, John E; Lyons, Eric; Wang, Ming-Li; Chen, Jung; Biggers, Eric; Zhang, Jisen; Huang, Lixian; Zhang, Lingmao; Miao, Wenjing; Zhang, Jian; Ye, Zhangyao; Miao, Chenyong; Lin, Zhicong; Wang, Hao; Zhou, Hongye; Yim, Won C; Priest, Henry D; Zheng, Chunfang; Woodhouse, Margaret; Edger, Patrick P; Guyot, Romain; Guo, Hao-Bo; Guo, Hong; Zheng, Guangyong; Singh, Ratnesh; Sharma, Anupma; Min, Xiangjia; Zheng, Yun; Lee, Hayan; Gurtowski, James; Sedlazeck, Fritz J; Harkess, Alex; McKain, Michael R; Liao, Zhenyang; Fang, Jingping; Liu, Juan; Zhang, Xiaodan; Zhang, Qing; Hu, Weichang; Qin, Yuan; Wang, Kai; Chen, Li-Yu; Shirley, Neil; Lin, Yann-Rong; Liu, Li-Yu; Hernandez, Alvaro G; Wright, Chris L; Bulone, Vincent; Tuskan, Gerald A; Heath, Katy; Zee, Francis; Moore, Paul H; Sunkar, Ramanjulu; Leebens-Mack, James H; Mockler, Todd; Bennetzen, Jeffrey L; Freeling, Michael; Sankoff, David; Paterson, Andrew H; Zhu, Xinguang; Yang, Xiaohan; Smith, J Andrew C; Cushman, John C; Paull, Robert E; Yu, Qingyi

2015-12-01

Pineapple (Ananas comosus (L.) Merr.) is the most economically valuable crop possessing crassulacean acid metabolism (CAM), a photosynthetic carbon assimilation pathway with high water-use efficiency, and the second most important tropical fruit. We sequenced the genomes of pineapple varieties F153 and MD2 and a wild pineapple relative, Ananas bracteatus accession CB5. The pineapple genome has one fewer ancient whole-genome duplication event than sequenced grass genomes and a conserved karyotype with seven chromosomes from before the ρ duplication event. The pineapple lineage has transitioned from C3 photosynthesis to CAM, with CAM-related genes exhibiting a diel expression pattern in photosynthetic tissues. CAM pathway genes were enriched with cis-regulatory elements associated with the regulation of circadian clock genes, providing the first cis-regulatory link between CAM and circadian clock regulation. Pineapple CAM photosynthesis evolved by the reconfiguration of pathways in C3 plants, through the regulatory neofunctionalization of preexisting genes and not through the acquisition of neofunctionalized genes via whole-genome or tandem gene duplication.

Samuel P. Massie Chair of Excellence Program

Energy Technology Data Exchange (ETDEWEB)

Johnson, James H. [Howard Univ., Washington, DC (United States)

2014-12-01

Abstract In 1994 the Department of Energy established the DOE Chair of Excellence Professorship in Environmental Disciplines Program. In 2004, the Massie Chair of Excellence Professor at Howard University transitioned from Dr. Edward Martin to Dr. James H. Johnson, Jr. At the time of his appointment Dr. Johnson served as professor of civil engineering and Dean of the College of Engineering, Architecture and Computer Sciences. Program activities under Dr. Johnson were in the following areas: • Increase the institution’s capacity to conduct scientific research and technical investigations at the cutting-edge. • Promote interactions, collaborations and partnerships between the private sector, Federal agencies, majority research institutes and other HBCUs. • Assist other HBCUs in reaching parity in engineering and related fields. • Mentor young investigators and be a role model for students.

Paper-Less CAD/CAM For Accelerator Components

International Nuclear Information System (INIS)

Franks, R M; Alford, O; Bertolini, L R

2001-01-01

Computer-aided design and manufacture (CAD/CAM) have enabled advances in the design and manufacture of many accelerator components, though government procurement rules tend to inhibit its use. We developed and executed a method that provides adequate documentation for the procurement process, industrial vendor manufacturing processes, and laboratory installation activities. We detail our experiences in the design and manufacture of 60 separate and unique PEP-II Low Energy Ring Interaction Region vacuum chambers totaling ∼ 140m in length as an example of how we used this technique, reducing design effort and manufacturing risk while streamlining the production process. We provide ''lessons learned'' to better implement and execute the process in subsequent iterations. We present our study to determine the estimated savings in the design and production of the Spallation Neutron Source room temperature linac if this process were utilized

Abnormal placental development and early embryonic lethality in EpCAM-null mice.

Directory of Open Access Journals (Sweden)

Keisuke Nagao

Full Text Available BACKGROUND: EpCAM (CD326 is encoded by the tacstd1 gene and expressed by a variety of normal and malignant epithelial cells and some leukocytes. Results of previous in vitro experiments suggested that EpCAM is an intercellular adhesion molecule. EpCAM has been extensively studied as a potential tumor marker and immunotherapy target, and more recent studies suggest that EpCAM expression may be characteristic of cancer stem cells. METHODOLOGY/PRINCIPAL FINDINGS: To gain insights into EpCAM function in vivo, we generated EpCAM -/- mice utilizing an embryonic stem cell line with a tacstd1 allele that had been disrupted. Gene trapping resulted in a protein comprised of the N-terminus of EpCAM encoded by 2 exons of the tacstd1 gene fused in frame to betageo. EpCAM +/- mice were viable and fertile and exhibited no obvious abnormalities. Examination of EpCAM +/- embryos revealed that betageo was expressed in several epithelial structures including developing ears (otocysts, eyes, branchial arches, gut, apical ectodermal ridges, lungs, pancreas, hair follicles and others. All EpCAM -/- mice died in utero by E12.5, and were small, developmentally delayed, and displayed prominent placental abnormalities. In developing placentas, EpCAM was expressed throughout the labyrinthine layer and by spongiotrophoblasts as well. Placentas of EpCAM -/- embryos were compact, with thin labyrinthine layers lacking prominent vascularity. Parietal trophoblast giant cells were also dramatically reduced in EpCAM -/- placentas. CONCLUSION: EpCAM was required for differentiation or survival of parietal trophoblast giant cells, normal development of the placental labyrinth and establishment of a competent maternal-fetal circulation. The findings in EpCAM-reporter mice suggest involvement of this molecule in development of vital organs including the gut, kidneys, pancreas, lungs, eyes, and limbs.

Abnormal placental development and early embryonic lethality in EpCAM-null mice.

Science.gov (United States)

Nagao, Keisuke; Zhu, Jianjian; Heneghan, Mallorie B; Hanson, Jeffrey C; Morasso, Maria I; Tessarollo, Lino; Mackem, Susan; Udey, Mark C

2009-12-31

EpCAM (CD326) is encoded by the tacstd1 gene and expressed by a variety of normal and malignant epithelial cells and some leukocytes. Results of previous in vitro experiments suggested that EpCAM is an intercellular adhesion molecule. EpCAM has been extensively studied as a potential tumor marker and immunotherapy target, and more recent studies suggest that EpCAM expression may be characteristic of cancer stem cells. To gain insights into EpCAM function in vivo, we generated EpCAM -/- mice utilizing an embryonic stem cell line with a tacstd1 allele that had been disrupted. Gene trapping resulted in a protein comprised of the N-terminus of EpCAM encoded by 2 exons of the tacstd1 gene fused in frame to betageo. EpCAM +/- mice were viable and fertile and exhibited no obvious abnormalities. Examination of EpCAM +/- embryos revealed that betageo was expressed in several epithelial structures including developing ears (otocysts), eyes, branchial arches, gut, apical ectodermal ridges, lungs, pancreas, hair follicles and others. All EpCAM -/- mice died in utero by E12.5, and were small, developmentally delayed, and displayed prominent placental abnormalities. In developing placentas, EpCAM was expressed throughout the labyrinthine layer and by spongiotrophoblasts as well. Placentas of EpCAM -/- embryos were compact, with thin labyrinthine layers lacking prominent vascularity. Parietal trophoblast giant cells were also dramatically reduced in EpCAM -/- placentas. EpCAM was required for differentiation or survival of parietal trophoblast giant cells, normal development of the placental labyrinth and establishment of a competent maternal-fetal circulation. The findings in EpCAM-reporter mice suggest involvement of this molecule in development of vital organs including the gut, kidneys, pancreas, lungs, eyes, and limbs.

CamOn: A Real-Time Autonomous Camera Control System

DEFF Research Database (Denmark)

Burelli, Paolo; Jhala, Arnav Harish

2009-01-01

This demonstration presents CamOn, an autonomous cam- era control system for real-time 3D games. CamOn employs multiple Artificial Potential Fields (APFs), a robot motion planning technique, to control both the location and orienta- tion of the camera. Scene geometry from the 3D environment...... contributes to the potential field that is used to determine po- sition and movement of the camera. Composition constraints for the camera are modelled as potential fields for controlling the view target of the camera. CamOn combines the compositional benefits of constraint- based camera systems, and improves...

Knowledge and training needs among Danish nurses about CAM

DEFF Research Database (Denmark)

Lunde, Anita

2010-01-01

Background: The increased use of CAM among the Danish population is well documented as are patient’s requests to discuss CAM with a healthcare professional. It is suggested that among different groups of healthcare professionals nurses are the most “open minded” about CAM. This makes it important...... to explore nurses’ knowledge about CAM and their needs for training. Methods: Similar to international investigations a Danish “CAM-knowledge” questionnaire was developed that included multiple choice, yes/no and 5 points scale answers. Validity was established through initial pilot testing. Contacts...... to a randomized sample of 2500 nurses were established through the Danish Nurses Foundation. The questionnaires were mailed by post with the possibility of anonymous return. The data material was analyzed using non-parametic methods. Results: The response rate was 67 % and 1458 completed questionnaires were...

Test plan for FY-91 alpha CAM evaluation

International Nuclear Information System (INIS)

Winberg, M.R.

1991-03-01

This report describes the test plan for evaluating the Merlin Gerin, Inc., Edgar alpha continuous air monitor (CAM) and associated analysis system to be conducted by Idaho National Engineering Laboratory (INEL) for the Department of Energy. INEL has evaluated other commercial alpha CAM systems to detect transuranic contaminants during waste handling and retrieval operations. This test plan outlines experimental methods, sampling methods, sampling and analysis techniques, and equipment needed and safety and quality requirements to test the commercial CAM. 8 refs., 3 figs

Radiation Pattern of Chair Armed Microstrip Antenna

Science.gov (United States)

Mishra, Rabindra Kishore; Sahu, Kumar Satyabrat

2016-12-01

This work analyzes planar antenna conformable to chair arm shaped surfaces for WLAN application. Closed form expressions for its radiation pattern are developed and validated using measurements on prototype and commercial EM code at 2.4 GHz.

CAM Stochastic Volatility Model for Option Pricing

Directory of Open Access Journals (Sweden)

Wanwan Huang

2016-01-01

Full Text Available The coupled additive and multiplicative (CAM noises model is a stochastic volatility model for derivative pricing. Unlike the other stochastic volatility models in the literature, the CAM model uses two Brownian motions, one multiplicative and one additive, to model the volatility process. We provide empirical evidence that suggests a nontrivial relationship between the kurtosis and skewness of asset prices and that the CAM model is able to capture this relationship, whereas the traditional stochastic volatility models cannot. We introduce a control variate method and Monte Carlo estimators for some of the sensitivities (Greeks of the model. We also derive an approximation for the characteristic function of the model.

Resin-composite blocks for dental CAD/CAM applications.

Science.gov (United States)

Ruse, N D; Sadoun, M J

2014-12-01

Advances in digital impression technology and manufacturing processes have led to a dramatic paradigm shift in dentistry and to the widespread use of computer-aided design/computer-aided manufacturing (CAD/CAM) in the fabrication of indirect dental restorations. Research and development in materials suitable for CAD/CAM applications are currently the most active field in dental materials. Two classes of materials are used in the production of CAD/CAM restorations: glass-ceramics/ceramics and resin composites. While glass-ceramics/ceramics have overall superior mechanical and esthetic properties, resin-composite materials may offer significant advantages related to their machinability and intra-oral reparability. This review summarizes recent developments in resin-composite materials for CAD/CAM applications, focusing on both commercial and experimental materials. © International & American Associations for Dental Research.

The use of economic evaluation in CAM: an introductory framework.

Science.gov (United States)

Ford, Emily; Solomon, Daniela; Adams, Jon; Graves, Nicholas

2010-11-11

For CAM to feature prominently in health care decision-making there is a need to expand the evidence-base and to further incorporate economic evaluation into research priorities.In a world of scarce health care resources and an emphasis on efficiency and clinical efficacy, CAM, as indeed do all other treatments, requires rigorous evaluation to be considered in budget decision-making. Economic evaluation provides the tools to measure the costs and health consequences of CAM interventions and thereby inform decision making. This article offers CAM researchers an introductory framework for understanding, undertaking and disseminating economic evaluation. The types of economic evaluation available for the study of CAM are discussed, and decision modelling is introduced as a method for economic evaluation with much potential for use in CAM. Two types of decision models are introduced, decision trees and Markov models, along with a worked example of how each method is used to examine costs and health consequences. This is followed by a discussion of how this information is used by decision makers. Undoubtedly, economic evaluation methods form an important part of health care decision making. Without formal training it can seem a daunting task to consider economic evaluation, however, multidisciplinary teams provide an opportunity for health economists, CAM practitioners and other interested researchers, to work together to further develop the economic evaluation of CAM.

The use of economic evaluation in CAM: an introductory framework

Science.gov (United States)

2010-01-01

Background For CAM to feature prominently in health care decision-making there is a need to expand the evidence-base and to further incorporate economic evaluation into research priorities. In a world of scarce health care resources and an emphasis on efficiency and clinical efficacy, CAM, as indeed do all other treatments, requires rigorous evaluation to be considered in budget decision-making. Methods Economic evaluation provides the tools to measure the costs and health consequences of CAM interventions and thereby inform decision making. This article offers CAM researchers an introductory framework for understanding, undertaking and disseminating economic evaluation. The types of economic evaluation available for the study of CAM are discussed, and decision modelling is introduced as a method for economic evaluation with much potential for use in CAM. Two types of decision models are introduced, decision trees and Markov models, along with a worked example of how each method is used to examine costs and health consequences. This is followed by a discussion of how this information is used by decision makers. Conclusions Undoubtedly, economic evaluation methods form an important part of health care decision making. Without formal training it can seem a daunting task to consider economic evaluation, however, multidisciplinary teams provide an opportunity for health economists, CAM practitioners and other interested researchers, to work together to further develop the economic evaluation of CAM. PMID:21067622

The use of economic evaluation in CAM: an introductory framework

Directory of Open Access Journals (Sweden)

Adams Jon

2010-11-01

Full Text Available Abstract Background For CAM to feature prominently in health care decision-making there is a need to expand the evidence-base and to further incorporate economic evaluation into research priorities. In a world of scarce health care resources and an emphasis on efficiency and clinical efficacy, CAM, as indeed do all other treatments, requires rigorous evaluation to be considered in budget decision-making. Methods Economic evaluation provides the tools to measure the costs and health consequences of CAM interventions and thereby inform decision making. This article offers CAM researchers an introductory framework for understanding, undertaking and disseminating economic evaluation. The types of economic evaluation available for the study of CAM are discussed, and decision modelling is introduced as a method for economic evaluation with much potential for use in CAM. Two types of decision models are introduced, decision trees and Markov models, along with a worked example of how each method is used to examine costs and health consequences. This is followed by a discussion of how this information is used by decision makers. Conclusions Undoubtedly, economic evaluation methods form an important part of health care decision making. Without formal training it can seem a daunting task to consider economic evaluation, however, multidisciplinary teams provide an opportunity for health economists, CAM practitioners and other interested researchers, to work together to further develop the economic evaluation of CAM.

Cerebral oxygen desaturation during beach chair position

NARCIS (Netherlands)

Moerman, Annelies T.; de Hert, Stefan G.; Jacobs, Tom F.; de Wilde, Lieven F.; Wouters, Patrick F.

2012-01-01

Cases of ischaemic brain damage have been reported in relatively healthy patients undergoing shoulder surgery in the beach chair position. Unrecognised cerebral hypoperfusion may have contributed to these catastrophic events, indicating that routine anaesthesia monitoring may not suffice.

Aquatic CAM photosynthesis: a brief history of its discovery

Science.gov (United States)

Keeley, Jon E.

2014-01-01

Aquatic CAM (Crassulacean Acid Metabolism) photosynthesis was discovered while investigating an unrelated biochemical pathway concerned with anaerobic metabolism. George Bowes was a significant contributor to this project early in its infancy. Not only did he provide me with some valuable perspectives on peer review rejections, but by working with his gas exchange system I was able to take our initial observations of diel fluctuations in malic acid to the next level, showing this aquatic plant exhibited dark CO2 uptake. CAM is universal in all aquatic species of the worldwide Lycophyta genus Isoetes and non-existent in terrestrial Isoetes. Outside of this genus aquatic CAM has a limited occurrence in three other families, including the Crassulaceae. This discovery led to fascinating adventures in the highlands of the Peruvian Andes in search of Stylites, a terrestrial relative of Isoetes. Stylites is a plant that is hermetically sealed from the atmosphere and obtains all of its carbon from terrestrial sources and recycles carbon through CAM. Considering the Mesozoic origin of Isoetes in shallow pools, coupled with the fact that aquatic Isoetes universally possess CAM, suggests the earliest evolution of CAM photosynthesis was most likely not in terrestrial plants.

QUANTIFICATION OF ANGIOGENESIS IN THE CHICKEN CHORIOALLANTOIC MEMBRANE (CAM

Directory of Open Access Journals (Sweden)

Silvia Blacher

2011-05-01

Full Text Available The chick chorioallantoic membrane (CAM provides a suitable in vivo model to study angiogenesis and evaluate several pro- and anti-angiogenic factors and compounds. In the present work, new developments in image analysis are used to quantify CAM angiogenic response from optical microscopic observations, covering all vascular components, from the large supplying and feeding vessels down to the capillary plexus. To validate our methodology angiogenesis is quantified during two phases of CAM development (day 7 and 13 and after treatment with an antiangiogenic modulator of the angiogenesis. Our morphometric analysis emphasizes that an accurate quantification of the CAM vasculature needs to be performed at various scales.

Annual Energy Savings and Thermal Comfort of Autonomously Heated and Cooled Office Chairs

Energy Technology Data Exchange (ETDEWEB)

Carmichael, Scott [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booten, Chuck [National Renewable Energy Lab. (NREL), Golden, CO (United States); Robertson, Joseph [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chin, Justin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Christensen, Dane [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Jacquelyn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Arent, Doug [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-07-01

Energy use in offices buildings is largely driven by air conditioning demands. But the optimal temperature is not the same for all building occupants, leading to the infamous thermostat war. And many occupants have independently overcome building comfort weaknesses with their own space heaters or fans. NREL tested is a customized office chair that automatically heats and cools the occupant along the seat and chair back according to the occupants' personal preferences. This product is shown to deliver markedly better comfort at room temperatures well above typical office cooling setpoints. Experimental subjects reported satisfaction in these elevated air temperatures, partly because the chair's cooling effect was tuned to their own individual needs. Simulation of the chair in office buildings around the U.S. shows that energy can be saved everywhere, with impacts varying due to the climate. Total building HVAC energy savings exceeded 10% in hot-dry climate zones. Due to high product cost, simple payback for the chair we studied is beyond the expected chair life. We then understood the need to establish cost-performance targets for comfort delivery packages. NREL derived several hypothetical energy/cost/comfort targets for personal comfort product systems. In some climate regions around the U.S., these show the potential for office building HVAC energy savings in excess of 20%. This report documents this research, providing an overview of the research team's methods and results while also identifying areas for future research building upon the findings.

Different CAD/CAM-processing routes for zirconia restorations: influence on fitting accuracy.

Science.gov (United States)

Kohorst, Philipp; Junghanns, Janet; Dittmer, Marc P; Borchers, Lothar; Stiesch, Meike

2011-08-01

The aim of the present in vitro study was to evaluate the influence of different processing routes on the fitting accuracy of four-unit zirconia fixed dental prostheses (FDPs) fabricated by computer-aided design/computer-aided manufacturing (CAD/CAM). Three groups of zirconia frameworks with ten specimens each were fabricated. Frameworks of one group (CerconCAM) were produced by means of a laboratory CAM-only system. The other frameworks were made with different CAD/CAM systems; on the one hand by in-laboratory production (CerconCAD/CAM) and on the other hand by centralized production in a milling center (Compartis) after forwarding geometrical data. Frameworks were then veneered with the recommended ceramics, and marginal accuracy was determined using a replica technique. Horizontal marginal discrepancy, vertical marginal discrepancy, absolute marginal discrepancy, and marginal gap were evaluated. Statistical analyses were performed by one-way analysis of variance (ANOVA), with the level of significance chosen at 0.05. Mean horizontal discrepancies ranged between 22 μm (CerconCAM) and 58 μm (Compartis), vertical discrepancies ranged between 63 μm (CerconCAD/CAM) and 162 μm (CerconCAM), and absolute marginal discrepancies ranged between 94 μm (CerconCAD/CAM) and 181 μm (CerconCAM). The marginal gap varied between 72 μm (CerconCAD/CAM) and 112 μm (CerconCAM, Compartis). Statistical analysis revealed that, with all measurements, the marginal accuracy of the zirconia FDPs was significantly influenced by the processing route used (p manufacture of four-unit FDPs.

Evaluating rare amino acid substitutions (RGC_CAMs in a yeast model clade.

Directory of Open Access Journals (Sweden)

Kenneth Polzin

Full Text Available When inferring phylogenetic relationships, not all sites in a sequence alignment are equally informative. One recently proposed approach that takes advantage of this inequality relies on sites that contain amino acids whose replacement requires multiple substitutions. Identifying these so-called RGC_CAM substitutions (after Rare Genomic Changes as Conserved Amino acids-Multiple substitutions requires that, first, at any given site in the amino acid sequence alignment, there must be a minimum of two different amino acids; second, each amino acid must be present in at least two taxa; and third, the amino acids must require a minimum of two nucleotide substitutions to replace each other. Although theory suggests that RGC_CAM substitutions are expected to be rare and less likely to be homoplastic, the informativeness of RGC_CAM substitutions has not been extensively evaluated in biological data sets. We investigated the quality of RGC_CAM substitutions by examining their degree of homoplasy and internode certainty in nearly 2.7 million aligned amino acid sites from 5,261 proteins from five species belonging to the yeast Saccharomyces sensu stricto clade whose phylogeny is well-established. We identified 2,647 sites containing RGC_CAM substitutions, a number that contrasts sharply with the 100,887 sites containing RGC_non-CAM substitutions (i.e., changes between amino acids that require only a single nucleotide substitution. We found that RGC_CAM substitutions had significantly lower homoplasy than RGC_non-CAM ones; specifically RGC_CAM substitutions showed a per-site average homoplasy index of 0.100, whereas RGC_non-CAM substitutions had a homoplasy index of 0.215. Internode certainty values were also higher for sites containing RGC_CAM substitutions than for RGC_non-CAM ones. These results suggest that RGC_CAM substitutions possess a strong phylogenetic signal and are useful markers for phylogenetic inference despite their rarity.

Repositioning chairs in benign paroxysmal positional vertigo

DEFF Research Database (Denmark)

West, Niels; Hansen, Søren; Møller, Martin Nue

2016-01-01

The objective was to evaluate the clinical value of repositioning chairs in management of refractory benign paroxysmal positional vertigo (BPPV) and to study how different BPPV subtypes respond to treatment. We performed a retrospective chart review of 150 consecutive cases with refractory vertigo...

Model Documentation for the MiniCAM

Energy Technology Data Exchange (ETDEWEB)

Brenkert, Antoinette L.; Smith, Steven J.; Kim, Son H.; Pitcher, Hugh M.

2003-07-17

The MiniCAM, short for the Mini-Climate Assessment Model, is an integrated assessment model of moderate complexity focused on energy and agriculture sectors. The model produces emissions of greenhouse gases (carbon dioxide, methane and nitrous oxide) and other radiatively important substances such as sulfur dioxide. Through incorporation of the simple climate model MAGICC, the consequences of these emissions for climate change and sea-level rise can be examined. The MiniCAM is designed to be fast and flexible.

Ergonomic Chair Explorative Intervention Study: Effect on Chronic ...

African Journals Online (AJOL)

Ergonomic Chair Explorative Intervention Study: Effect on Chronic Upper ... they are associated with a complex relationship between individual, work-related and ... in chronic upper quadrant musculoskeletal dysfunction and work productivity ...

Treatment Preferences for CAM in Children with Chronic Pain

OpenAIRE

Tsao, Jennie C. I.; Meldrum, Marcia; Kim, Su C.; Jacob, Margaret C.; Zeltzer, Lonnie K.

2006-01-01

CAM therapies have become increasingly popular in pediatric populations. Yet, little is known about children's preferences for CAM. This study examined treatment preferences in chronic pediatric pain patients offered a choice of CAM therapies for their pain. Participants were 129 children (94 girls) (mean age = 14.5 years ± 2.4; range = 8–18 years) presenting at a multidisciplinary, tertiary clinic specializing in pediatric chronic pain. Bivariate and multivariate analyses were used to examin...

Biodistribution studies of epithelial cell adhesion molecule (EpCAM)-directed monoclonal antibodies in the EpCAM-transgenic mouse tumor model

NARCIS (Netherlands)

Kosterink, Jos G. W.; McLaughlin, Pamela M. J.; Lub-de Hooge, Marjolijn N.; Hendrikse, Harry H.; Van Zanten, Jacoba; Van Garderen, Evert; Harmsen, Martin C.; De Leij, Lou F. M. H.

2007-01-01

The human pancarcinoma-associated epithelial cell adhesion molecule (EpCAM) (EGP-2, CO17-1A) is a well-known target for carcinoma-directed immunotherapy. Mouse-derived mAbs directed to EpCAM have been used to treat colon carcinoma patients showing well-tolerable toxic side effects but limited

Severe cerebral desaturation during shoulder arthroscopy in the beach-chair position

DEFF Research Database (Denmark)

Dippmann, Christian; Winge, Søren; Nielsen, Henning Bay

2010-01-01

During shoulder arthroscopy in the beach-chair position, cerebral ischemia may be a serious complication because prolonged hypotension may affect regional cerebral oxygen supply. We present the cases of 2 patients in whom a reduction in mean arterial pressure after anesthesia provoked a decrease...... cerebral oxygenation. During surgery in the beach-chair position, hypotension must be avoided, and in all patients regional, cerebral oxygenation should be monitored and optimized....

SenseCam reminiscence and action recall in memory-unimpaired people.

Science.gov (United States)

Seamon, John G; Moskowitz, Tacie N; Swan, Ashley E; Zhong, Boyuan; Golembeski, Amy; Liong, Christopher; Narzikul, Alexa C; Sosan, Olumide A

2014-01-01

Case studies of memory-impaired individuals consistently show that reminiscing with SenseCam images enhances event recall. This exploratory study examined whether a similar benefit would occur for the consolidation of memories in memory-unimpaired people. We tested delayed recall for atypical actions observed on a lengthy walk. Participants used SenseCam, a diary, or no external memory aid while walking, followed by reminiscence with SenseCam images, diary entries, or no aid, either alone (self-reminiscence) or with the experimenter (social reminiscence). One week later, when tested without SenseCam images or diary entries, prior social reminiscence produced greater recall than self-reminiscence, but there were no differences between memory aid conditions for action free recall or action order recall. When methodological variables were controlled, there was no recall advantage for SenseCam reminiscence with memory-unimpaired participants. The case studies and present study differ in multiple ways, making direct comparisons problematic. SenseCam is a valuable aid to the memory impaired, but its mnemonic value for non-clinical populations remains to be determined.

The application of CAD / CAM technology in Dentistry

Science.gov (United States)

Susic, I.; Travar, M.; Susic, M.

2017-05-01

Information and communication technologies have found their application in the healthcare sector, including the frameworks of modern dentistry. CAD / CAM application in dentistry is the process by which is attained finished dental restoration through fine milling process of ready ceramic blocks. CAD / CAM is an acronym of english words Computer-Aided-Design (CAD) / Computer-Aided-Manufacture (CAM), respectively dental computer aided design and computer aided manufacture of inlays, onlays, crowns and bridges. CAD / CAM technology essentially allows you to create a two-dimensional and three-dimensional models and their materialization by numerical controlled machines. In order to operate more efficiently, reduce costs, increase user/patient satisfaction and ultimately achieve profits, many dental offices in the world have their attention focused on implementation of modern IT solutions in everyday practice. In addition to the specialized clinic management software, inventory control, etc., or hardware such as the use of lasers in cosmetic dentistry or intraoral scanning, recently the importance is given to the application of CAD / CAM technology in the field of prosthetic. After the removal of pathologically altered tooth structure, it is necessary to achieve restoration that will be most similar to the anatomy of a natural tooth. Applying CAD / CAM technology on applicable ceramic blocks it can be obtained very quick, but also very accurate restoration, in the forms of inlays, onlays, bridges and crowns. The paper presents the advantages of using this technology as well as satisfaction of the patients and dentists by using systems as: Cercon, Celay, Cerec, Lava, Everest, which represent imperative of modern dentistry in creating fixed dental restorations.

Democratic Leadership and Faculty Empowerment at the Community College: A Theoretical Model for the Department Chair.

Science.gov (United States)

McArthur, Ronald C.

2002-01-01

Argues that community college organization at the department level presents challenging leadership issues for the newly appointed department chair. Asserts that existing culture, which looks upon the chair with some mistrust, demands chairs who behave as peers rather than military commanders. Concludes that democratic leadership is the most…

ECOHEALTH CHAIRS in HEALTH and GLOBAL ENVIRONMENTAL ...

International Development Research Centre (IDRC) Digital Library (Canada)

Francine Sinzinkayo

funds in the eligible countries where the research will take place. ... What is your definition of “third-party organisations” in an “Ecohealth Chair” application? ... other functions of the Chair (as specified in section 4 of the Call) but will not receive ...

The ChemCam Instrument Suite on the Mars Science Laboratory (MSL) Rover: Body Unit and Combined System Tests

International Nuclear Information System (INIS)

Wiens, Roger C.; Barraclough, Bruce; Barkley, Walter C.; Bender, Steve; Bernardin, John; Bultman, Nathan; Clanton, Robert C.; Clegg, Samuel; Delapp, Dorothea; Dingler, Robert; Enemark, Don; Flores, Mike; Hale, Thomas; Lanza, Nina; Lasue, Jeremie; Latino, Joseph; Little, Cynthia; Morrison, Leland; Nelson, Tony; Romero, Frank; Salazar, Steven; Stiglich, Ralph; Storms, Steven; Trujillo, Tanner; Ulibarri, Mike; Vaniman, David; Whitaker, Robert; Witt, James; Maurice, Sylvestre; Bouye, Marc; Cousin, Agnes; Cros, Alain; D'Uston, Claude; Forni, Olivier; Gasnault, Olivier; Kouach, Driss; Lasue, Jeremie; Pares, Laurent; Poitrasson, Franck; Striebig, Nicolas; Thocaven, Jean-Jacques; Saccoccio, Muriel; Perez, Rene; Bell, James F. III; Hays, Charles; Blaney, Diana; DeFlores, Lauren; Elliott, Tom; Kan, Ed; Limonadi, Daniel; Lindensmith, Chris; Miller, Ed; Reiter, Joseph W.; Roberts, Tom; Simmonds, John J.; Warner, Noah; Blank, Jennifer; Bridges, Nathan; Cais, Phillippe; Clark, Benton; Cremers, David; Dyar, M. Darby; Fabre, Cecile; Herkenhoff, Ken; Kirkland, Laurel; Landis, David; Langevin, Yves; Lanza, Nina; Newsom, Horton; Ollila, Ann; LaRocca, Frank; Ott, Melanie; Mangold, Nicolas; Manhes, Gerard; Mauchien, Patrick; Blank, Jennifer; McKay, Christopher; Mooney, Joe; Provost, Cheryl; Morris, Richard V.; Sautter, Violaine; Sautter, Violaine; Waterbury, Rob; Wong-Swanson, Belinda; Barraclough, Bruce; Bender, Steve; Vaniman, David

2012-01-01

The ChemCam instrument suite on the Mars Science Laboratory (MSL) rover Curiosity provides remote compositional information using the first laser-induced breakdown spectrometer (LIBS) on a planetary mission, and provides sample texture and morphology data using a remote micro-imager (RMI). Overall, ChemCam supports MSL with five capabilities: remote classification of rock and soil characteristics; quantitative elemental compositions including light elements like hydrogen and some elements to which LIBS is uniquely sensitive (e.g., Li, Be, Rb, Sr, Ba); remote removal of surface dust and depth profiling through surface coatings; context imaging; and passive spectroscopy over the 240-905 nm range. ChemCam is built in two sections: The mast unit, consisting of a laser, telescope, RMI, and associated electronics, resides on the rover's mast, and is described in a companion paper. ChemCam's body unit, which is mounted in the body of the rover, comprises an optical de-multiplexer, three spectrometers, detectors, their coolers, and associated electronics and data handling logic. Additional instrument components include a 6 m optical fiber which transfers the LIBS light from the telescope to the body unit, and a set of onboard calibration targets. ChemCam was integrated and tested at Los Alamos National Laboratory where it also underwent LIBS calibration with 69 geological standards prior to integration with the rover. Post-integration testing used coordinated mast and instrument commands, including LIBS line scans on rock targets during system-level thermal-vacuum tests. In this paper we describe the body unit, optical fiber, and calibration targets, and the assembly, testing, and verification of the instrument prior to launch. (authors)

Effectiveness of CAM therapy: understanding the evidence.

Science.gov (United States)

Staud, Roland

2011-02-01

By definition, complementary and alternative medicine (CAM) attempts to diagnose and treat illnesses in unconventional ways. CAM has been classified as: (1) alternative medical systems (eg, traditional Chinese medicine [including acupuncture], naturopathic medicine, ayurvedic medicine, and homeopathy); (2) biologic-based therapies (eg, herbal, special dietary, and individual biologic treatments); (3) energy therapies (eg, Reiki, therapeutic touch, magnet therapy, Qi Gong, and intercessory prayer); (4) manipulative and body-based systems (eg, chiropractic, osteopathy, and massage); and (5) mind-body interventions (eg, meditation, biofeedback, hypnotherapy, and the relaxation response). This review focuses on how to assess the effectiveness of CAM therapies for chronic musculoskeletal pains, emphasizing the role of specific and nonspecific analgesic mechanisms, including placebo. Copyright © 2011 Elsevier Inc. All rights reserved.

Chair rise capacity and associated factors in older home-care clients.

Science.gov (United States)

Tiihonen, Miia; Hartikainen, Sirpa; Nykänen, Irma

2017-07-01

The aim of this study was to investigate the ability of older home-care clients to perform the five times chair rise test and associated personal characteristics, nutritional status and functioning. The study sample included 267 home-care clients aged ≥75 years living in Eastern and Central Finland. The home-care clients were interviewed at home by home-care nurses, nutritionists and pharmacists. The collected data contained sociodemographic factors, functional ability (Barthel Index, IADL), cognitive functioning (MMSE), nutritional status (MNA), depressive symptoms (GDS-15), medical diagnoses and drug use. The primary outcome was the ability to perform the five times chair rise test. Fifty-one per cent ( n=135) of the home-care clients were unable to complete the five times chair rise test. Twenty-three per cent ( n=64) of the home-care clients had good chair rise capacity (≤17 seconds). In a multivariate logistic regression analysis, fewer years of education (odds ratio [OR] = 1.11, 95% confidence interval [CI] 1.04-1.18), lower ADL (OR = 1.54, 95% CI 1.34-1.78) and low MNA scores (OR = 1.12, 95% CI 1.04-1.20) and a higher number of co-morbidities (OR = 1.21, 95% CI 1.02-1.43) were associated with inability to complete the five times chair rise test. Poor functional mobility, which was associated with less education, a high number of co-morbidities and poor nutritional status, was common among older home-care clients. To maintain and to prevent further decline in functional mobility, physical training and nutritional services are needed. (NutOrMed, ClinicalTrials.gov Identifier: NCT02214758).

Prevalence of Cam Morphology in Females with Femoroacetabular Impingement

Directory of Open Access Journals (Sweden)

David M Levy

2015-12-01

Full Text Available Cam and pincer are two common morphologies responsible for femoroacetabular impingement. Previous literature has reported that cam deformity is predominantly a male morphology, while being significantly less common in females. The purpose of this study was to determine the prevalence of cam morphology in female subjects diagnosed with symptomatic FAI. All females presenting to the senior author’s clinic diagnosed with symptomatic FAI between December 2006 and Cam and pincer are two common morphologies responsible for femoroacetabular impingement. Previous literature has reported that cam deformity is predominantly a male morphology, while being significantly less common in females. Cam morphology is commonly assessed with the alpha angle, measured on radiographs. The purpose of this study was to determine the prevalence of cam morphology utilizing the alpha angle in female subjects diagnosed with symptomatic FAI. All females presenting to the senior author’s clinic diagnosed with symptomatic FAI between December 2006 and January 2013 were retrospectively reviewed. Alpha (α angles were measured on AP (anteroposterior and lateral (Dunn 90°, cross-table lateral, and/or frog-leg lateral plain radiographs by two blinded physicians, and the largest measured angle was used. Using Gosvig et al.’s classification, alpha angle was characterized as (pathologic > 57°, borderline (51-56°, subtle (46-50°, very subtle (43-45°, or normal (≤42°. Three hundred and ninety-one patients (438 hips were analyzed (age 36.2 ± 12.3 years. Among the hips included, 35.6% were normal, 14.6% pathologic, 15.1% borderline, 14.6% subtle, and 20.1% very subtle. There was no correlation between alpha angle and patient age (R = 0.17 or body mass index (BMI (R = 0.05. The intraclass correlation coefficient (ICC for α-angle measurements was 0.84. Sixty-four percent of females in this cohort had an alpha angle > 42°. Subtle cam deformity plays a significant role in

CAM for Pediatric Pain: What is State-of-the-Research?

Directory of Open Access Journals (Sweden)

Jennie C. I. Tsao

2006-01-01

Full Text Available Previously, we reviewed the evidence for the efficacy of CAM approaches for pediatric pain (volume 2; issue 2; 2005 using criteria developed by the American Psychological Association Division 12 Task Force. Our review focused on CAM modalities that had been tested with at least one controlled trial or multiple baseline study. In addition, only those trials in which children comprised the study sample were included. Thus, several CAM modalities were not included in our review. Key ethical and other reasons for the limited literature on CAM for pediatric pain as well as directions for future studies are discussed.

An Innovative Radiation Hardened CAM Architecture

CERN Document Server

Shojaii, Seyed Ruhollah; The ATLAS collaboration

2018-01-01

This article describes an innovative Content Addressable Memory (CAM) cell with radiation hardened (RH) architecture. The RH-CAM is designed in a commercial 28 nm CMOS technology. The circuit has been simulated in worst-case conditions, and the effects due to single particles have been analyzed by injecting a current pulse into a circuit node. The proposed architecture is suitable for on-time pattern recognition tasks in harsh environments, such as front-end electronics in hadron colliders and in space applications.

Use of Complementary and Alternative Medicine (CAM) as Part of the Oncological Treatment: Survey about Patients? Attitude towards CAM in a University-Based Oncology Center in Germany

OpenAIRE

Kessel, Kerstin A.; Lettner, Sabrina; Kessel, Carmen; Bier, Henning; Biedermann, Tilo; Friess, Helmut; Herrschbach, Peter; Gschwend, J?rgen E.; Meyer, Bernhard; Peschel, Christian; Schmid, Roland; Schwaiger, Markus; Wolff, Klaus-Dietrich; Combs, Stephanie E.

2016-01-01

Introduction To understand if and which patients would be open-minded to Complementary and Alternative Medicine (CAM) use parallel to their oncological treatment. Moreover, we sought to determine which methods are most accepted and which are the primary motivators to use CAM. Methods We developed and anonymously conducted a questionnaire for patients in the oncology center (TU Munich). Questions focus on different CAM methods, previous experiences, and willingness to apply or use CAM when off...

Camões e a cosmogonia

Science.gov (United States)

Costa, J. M.

2003-08-01

Os Lusíadas, escrito por Luis de Camões em 1572, é um poema épico renascentista e a visão Cosmogônica do autor é apresentada, principalmente, no último canto do poema, quando Tétis mostra ao Gama a Máquina do Mundo. A Cosmogonia de Camões neste poema reflete uma visão de uma época de transição, que ainda não incorporou os elementos da revolução Copernicana. É uma visão Grego- Ptolomaica e também medieval. O poeta guia-se pela tradução e notas feita por Pedro Nunes, inventor do Nonio, do Tratado da Esfera "De Sphaera" do Astrônomo Inglês John Holywood, mais conhecido pelo nome latinizado de Johannes Sacrobosco. Outra provável fonte de Camões, de acordo com Luciano Antonio Pereira da Silva em Astronomia de os Lusíadas, é o "Theoricae novae Planetarum" (1460) do astrólogo Alemão Jorge Purbáquio (1423 - 1461). A Astronomia de Os Lusíadas representa a ciência do tempo de Camões. Camões nunca emprega a palavra constelação e seu catálogo é bastante completo. A Máquina do Mundo tem a Terra no centro. Em redor, em círculos concêntricos, a lua (Diana), Mercúrio, Vênus, o Sol (Febo), Marte, Júpiter e Saturno. Envolvendo estes astros tem o firmamento seguido pelo "Céu Áqueo" ou cristalino, depois o 1o Móbil, esfera que arrasta todas as outras consigo. Este trabalho, multidisciplinar, serve tanto para ensinar aos alunos da Física como das Ciências Humanas, a concepção de mundo do renascimento de uma forma belamente poética em versos decassílabos Este trabalho também ajuda na apreciação do maior clássico da língua portuguesa e mostra como as Ciências e as artes, em geral, estão correlacionadas e refletem a visão de mundo da época em que foi produzida.

Use of EyeCam for imaging the anterior chamber angle.

Science.gov (United States)

Perera, Shamira A; Baskaran, Mani; Friedman, David S; Tun, Tin A; Htoon, Hla M; Kumar, Rajesh S; Aung, Tin

2010-06-01

To compare EyeCam (Clarity Medical Systems, Pleasanton, CA) imaging with gonioscopy for detecting angle closure. In this prospective, hospital-based study, subjects underwent gonioscopy by a single observer and EyeCam imaging by a different operator. EyeCam images were graded by two masked observers. The anterior chamber angle in a quadrant was classified as closed if the trabecular meshwork could not be seen. The eye was classified as having angle closure if two or more quadrants were closed. One hundred fifty-two subjects were studied. The mean age was 57.4 years (SD 12.9) and there were 82 (54%) men. Of the 152 eyes, 21 (13.8%) had angle closure. The EyeCam provided clear images of the angles in 98.8% of subjects. The agreement between the EyeCam and gonioscopy for detecting angle closure in the superior, inferior, nasal, and temporal quadrants based on agreement coefficient (AC1) statistics was 0.73, 0.75, 0.76, and 0.72, respectively. EyeCam detected more closed angles than did gonioscopy in all quadrants (P gonioscopy, 21/152 (13.8%) eyes were diagnosed as angle closure compared to 41 (27.0%) of 152 with EyeCam (P gonioscopy for detecting angle closure. However, it detected more closed angles than did gonioscopy in all quadrants.

Biofuel crops with CAM photosynthesis: Economic potential on moisture-limited lands

Science.gov (United States)

Bartlett, Mark; Hartzell, Samantha; Porporato, Amilcare

2017-04-01

As the demand for food and renewable energy increases, the intelligent utilization of marginal lands is becoming increasingly critical. In marginal lands classified by limited rainfall or soil salinity, the cultivation of traditional C3 and C4 photosynthesis crops often is economically infeasible. However, in such lands, nontraditional crops with crassulacean acid metabolism (CAM) photosynthesis show great economic potential for cultivation. CAM crops including Opuntia (prickly pear) and Ananas (pineapple) achieve a water use efficiency which is three fold higher than C4 crops such as corn and 6-fold higher than C3 crops such as wheat, leading to a comparable annual productivity with only 20% of the water demand. This feature, combined with a shallow rooting depth and a high water storage capacity, allows CAM plants to take advantage of small, infrequent rainfall amounts in shallow, quickly draining soils. Furthermore, CAM plants typically have properties (e.g., high content of non-structural carbohydrates) that are favorable for biofuel production. Here, for marginal lands characterized by low soil moisture availability and/or high salinity, we assess the potential productivity and economic benefits of CAM plants. CAM productivity is estimated using a recently developed model which simulates CAM photosynthesis under a range of soil and climate conditions. From these results, we compare the energy and water resource inputs required by CAM plants to those required by more traditional C3 and C4 crops (corn, wheat, sorghum), and we evaluate the economic potential of CAM crops as sources of food, fodder, or biofuel in marginal soils. As precipitation events become more intense and infrequent, we show that even though marginal land area may increase, CAM crop cultivation shows great promise for maintaining high productivity with minimal water inputs. Our analysis indicates that on marginal lands, widespread cultivation of CAM crops as biofuel feedstock may help

Comparison of four specific dynamic office chairs with a conventional office chair: Impact upon muscle activation, physical activity and posture

NARCIS (Netherlands)

Ellegast, R.P.; Kraft, K.; Groenesteijn, L.; Krause, F.; Berger, H.; Vink, P.

2012-01-01

Prolonged and static sitting postures provoke physical inactivity at VDU workplaces and are therefore discussed as risk factors for the musculoskeletal system. Manufacturers have designed specific dynamic office chairs featuring structural elements which promote dynamic sitting and therefore

Administrative Challenges and Response Strategies to the Job Performance of Marketing Department Chairs.

Science.gov (United States)

Dyer, Beverly G.; Miller, Michael T.

This study reports on the job challenges and corresponding response strategies that department chairs at graduate and undergraduate colleges and universities encounter and rely upon. Literature and research related to marketing department chairs, marketing education, and marketing majors indicates that business schools have come under attack by…

Scleroderma, Stress and CAM Utilization

Directory of Open Access Journals (Sweden)

Ka-Kit Hui

2009-01-01

Full Text Available Scleroderma is an autoimmune disease influenced by interplay among genetic and environmental factors, of which one is stress. Complementary and alternative medicine (CAM is frequently used to treat stress and those diseases in which stress has been implicated. Results are presented from a survey of patients with scleroderma. Respondents were a convenient sample of those attending a national conference in Las Vegas in 2002. Findings implicate stress in the onset, continuation and exacerbation of scleroderma. The implication is that CAM providers may be filling an important patient need in their provision of services that identify and treat stress and its related disorders.

Trend and application of CAD/CAM system

International Nuclear Information System (INIS)

Kang, Man Ok

1984-09-01

This report is about trend and application of CAD/CAM system, giving descriptions of computer aided design which helps construction, engineering and drafting tasks. It also tells of computer aided manufacturing related general design of manufactures, which includes process design, production management, decision of work technology, processing. The need and application of CAD/CAM system is increasing more and more for industry each area.

Utilizing Chair Massage to Address One Woman's Health in Rural Ghana West Africa: a Case Report.

Science.gov (United States)

Meryanos, Cathy J

2016-12-01

There is limited access to health care in rural Ghana and virtually no rehabilitative services available. This situation presents a unique opportunity to utilize chair massage in addressing women's health in rural Ghana, particularly when it comes to muscle pain and fatigue from heavy labor. The objective of this case report is to determine the results of chair massage as a strategy to reduce neck, shoulder, and back pain, while increasing range of motion. The patient is a 63-year-old Ghanaian female, who was struck by a public transport van while carrying a 30-50 pound load on her head, two years prior. The accident resulted in a broken right humerus and soft tissue pain. A traditional medicine practitioner set the bone, however there was no post-accident rehabilitation available. At the time of referral, she presented complaints of shoulder, elbow, and wrist pain. In addition, she was unable to raise her right hand to her mouth for food intake. The results of this case report include an increase in range of motion, as well as elimination of pain in the right shoulder, elbow, and hand. Visual assessments showed an approximate increase of ROM within the ranges of 45-65 degrees in the right arm, as well as 10-15 degrees in 4th and 5th fingers. There was also a decrease in muscle hypertonicity in the thoracic and cervical areas, and a profound increase in quality of life for the patient. This case report illustrates how therapeutic chair massage was utilized to address a common health concern for one woman in rural Ghana. It also demonstrates that pre-existing musculoskeletal disorders and pain may be eliminated with massage intervention. Massage therapy may be important to ameliorating certain types of health problems in remote rural villages in low income countries.

Angle assessment by EyeCam, goniophotography, and gonioscopy.

Science.gov (United States)

Baskaran, Mani; Perera, Shamira A; Nongpiur, Monisha E; Tun, Tin A; Park, Judy; Kumar, Rajesh S; Friedman, David S; Aung, Tin

2012-09-01

To compare EyeCam (Clarity Medical Systems, Pleasanton, CA) and goniophotography in detecting angle closure, using gonioscopy as the reference standard. In this hospital-based, prospective, cross-sectional study, participants underwent gonioscopy by a single observer, and EyeCam imaging and goniophotography by different operators. The anterior chamber angle in a quadrant was classified as closed if the posterior trabecular meshwork could not be seen. A masked observer categorized the eyes as per the number of closed quadrants, and an eye was classified as having angle closure if there were 2 or more quadrants of closure. Agreement between the methods was analyzed by κ statistic and comparison of area under receiver operating characteristic curves (AUC). Eighty-five participants (85 eyes) were included, the majority of whom were Chinese. Angle closure was detected in 38 eyes (45%) with gonioscopy, 40 eyes (47%) using EyeCam, and 40 eyes (47%) with goniophotography (P=0.69 in both comparisons, McNemar test). The agreement for angle closure diagnosis (by eye) between gonioscopy and the 2 imaging modalities was high (κ=0.86; 95% Confidence Interval (CI), 0.75-0.97), whereas the agreement between EyeCam and goniophotography was not as good (κ=0.72; 95% CI, 0.57-0.87); largely due to lack of agreement in the nasal and temporal quadrants (κ=0.55 to 0.67). The AUC for detecting eyes with gonioscopic angle closure was similar for goniophotography and EyeCam (AUC 0.93, sensitivity=94.7%, specificity=91.5%; P>0.95). EyeCam and goniophotography have similarly high sensitivity and specificity for the detection of gonioscopic angle closure.

Engine testing of ceramic cam-roller followers. Final report

Energy Technology Data Exchange (ETDEWEB)

Kalish, Y. [Detroit Diesel Corp., MI (United States)

1992-04-01

For several years, DDC has been developing monolithic ceramic heat engine components. One of the components, developed for an application in our state-of-the-art on-highway, heavy-duty diesel engine, the Series 60, is a silicon nitride cam-roller follower. Prior to starting this program, each valve train component in the Series 60 was considered for conversion to a ceramic material. Many advantages and disadvantages (benefits and risks) were considered. From this effort, one component was selected, the cam-roller follower. Using a system design approach, a ceramic cam-roller follower offered functional improvement at a reasonable cost. The purpose of the project was to inspect and test 100 domestically produced silicon nitride cam-roller followers built to the requirements of the DDC series 60 engine.

Three essays on the economics of science policy: The impact of funding, collaboration and research chairs

Science.gov (United States)

Mirnezami, Seyed Reza

This thesis studies the determinants that influence the number of citations, the effect of having a research collaboration with top-funded scientists on scientific productivity, and the effect of holding a research chair on scientific productivity. Based on a review study by Bornmann and Daniel (2008), one can argue that non-scientific factors determining the decision to cite do not significantly alter the role of citation as a measure of research impact. Assuming that the number of citations is a good measure for research impact and, in turn, for a certain kind of quality, we showed that the number of articles and the visibility of a researcher, the impact factor of the journal, the size of the research team, and the institutional setting of the university are the important determinants of citation counts. However, we have found that there is no significant effect of public funding and gender in most of the domains examined. The point that funding amount is not a significant determinant of citation counts does not necessarily contradict the positive effect of funding on scientific productivity. We also developed a theoretical model and proposed some hypotheses about the effect of collaboration with top-funded scientists on scientific productivity. We then validated the hypotheses with empirical analysis and showed that such collaboration has a positive effect on scientific productivity. This significant effect may exist through different channels: transfer of tacit knowledge, more scientific publications, economy of scale in knowledge production because of better research equipment, and expanded research network. The results also verified the positive effect of funding, the positive effect of networking (measured by number of co-authors), the inverted U-shaped effect of age, and the fewer number of publications by women compared to men. Finally, we made a distinction between different attributes of research chairs and their effect on scientific productivity. One

Temporal and spatial transcriptomic and microRNA dynamics of CAM photosynthesis in pineapple.

Science.gov (United States)

Wai, Ching M; VanBuren, Robert; Zhang, Jisen; Huang, Lixian; Miao, Wenjing; Edger, Patrick P; Yim, Won C; Priest, Henry D; Meyers, Blake C; Mockler, Todd; Smith, J Andrew C; Cushman, John C; Ming, Ray

2017-10-01

The altered carbon assimilation pathway of crassulacean acid metabolism (CAM) photosynthesis results in an up to 80% higher water-use efficiency than C 3 photosynthesis in plants making it a potentially useful pathway for engineering crop plants with improved drought tolerance. Here we surveyed detailed temporal (diel time course) and spatial (across a leaf gradient) gene and microRNA (miRNA) expression patterns in the obligate CAM plant pineapple [Ananas comosus (L.) Merr.]. The high-resolution transcriptome atlas allowed us to distinguish between CAM-related and non-CAM gene copies. A differential gene co-expression network across green and white leaf diel datasets identified genes with circadian oscillation, CAM-related functions, and source-sink relations. Gene co-expression clusters containing CAM pathway genes are enriched with clock-associated cis-elements, suggesting circadian regulation of CAM. About 20% of pineapple microRNAs have diel expression patterns, with several that target key CAM-related genes. Expression and physiology data provide a model for CAM-specific carbohydrate flux and long-distance hexose transport. Together these resources provide a list of candidate genes for targeted engineering of CAM into C 3 photosynthesis crop species. © 2017 The Authors The Plant Journal © 2017 John Wiley & Sons Ltd.

Agave as a model CAM crop system for a warming and drying world.

Science.gov (United States)

Stewart, J Ryan

2015-01-01

As climate change leads to drier and warmer conditions in semi-arid regions, growing resource-intensive C3 and C4 crops will become more challenging. Such crops will be subjected to increased frequency and intensity of drought and heat stress. However, agaves, even more than pineapple (Ananas comosus) and prickly pear (Opuntia ficus-indica and related species), typify highly productive plants that will respond favorably to global warming, both in natural and cultivated settings. With nearly 200 species spread throughout the U.S., Mexico, and Central America, agaves have evolved traits, including crassulacean acid metabolism (CAM), that allow them to survive extreme heat and drought. Agaves have been used as sources of food, beverage, and fiber by societies for hundreds of years. The varied uses of Agave, combined with its unique adaptations to environmental stress, warrant its consideration as a model CAM crop. Besides the damaging cycles of surplus and shortage that have long beset the tequila industry, the relatively long maturation cycle of Agave, its monocarpic flowering habit, and unique morphology comprise the biggest barriers to its widespread use as a crop suitable for mechanized production. Despite these challenges, agaves exhibit potential as crops since they can be grown on marginal lands, but with more resource input than is widely assumed. If these constraints can be reconciled, Agave shows considerable promise as an alternative source for food, alternative sweeteners, and even bioenergy. And despite the many unknowns regarding agaves, they provide a means to resolve disparities in resource availability and needs between natural and human systems in semi-arid regions.

Agave as a model CAM crop system for a warming and drying world

Directory of Open Access Journals (Sweden)

J. Ryan eStewart

2015-09-01

Full Text Available As climate change leads to drier and warmer conditions in semi-arid regions, growing resource-intensive C3 and C4 crops will become more challenging. Such crops will be subjected to increased frequency and intensity of drought and heat stress. However, agaves, even more than pineapple (Ananas comosus and prickly pear (Opuntia ficus-indica and related species, typify highly productive plants that will respond favorably to global warming, both in natural and cultivated settings. With nearly 200 species spread throughout the U.S., Mexico, and Central America, agaves have evolved traits, including crassulacean acid metabolism (CAM, that allow them to survive extreme heat and drought. Agaves have been used as sources of food, beverage, and fiber by societies for hundreds of years. The varied uses of Agave, combined with its unique adaptations to environmental stress, warrant its consideration as a model CAM crop. Besides the damaging cycles of surplus and shortage that have long beset the tequila industry, the relatively long maturation cycle of Agave, its monocarpic flowering habit, and unique morphology comprise the biggest barriers to its widespread use as a crop suitable for mechanized production. Despite these challenges, agaves exhibit potential as crops since they can be grown on marginal lands, but with more resource input than is widely assumed. If these constraints can be reconciled, Agave shows considerable promise as an alternative source for food, alternative sweeteners, and even bioenergy. And despite the many unknowns regarding agaves, they provide a means to resolve disparities between natural and human systems in semi-arid regions.

New South Africa–Canada Research Chairs Initiative | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

2016-12-08

Dec 8, 2016 ... ... (SARChI), as well as on the Industrial Research Chairs program, funded in part ... Calls for submissions will be launched on January 3, 2017 and will close ... Natural Sciences and Engineering Research Council of Canada.

A review of complementary and alternative medicine (CAM) by people with multiple sclerosis.

Science.gov (United States)

Olsen, Sherri A

2009-01-01

Multiple sclerosis (MS) is a chronic, unpredictable disease of the central nervous system without a known cure. Because of this, people with MS often seek complementary and alternative medicines (CAM) to manage their disease symptoms. The goal of this review article was to describe the use of CAM by individuals diagnosed with MS. Evidence was obtained by searching Medline (1950-2007), EBSCOhost and PubMed for studies relating CAM to MS. Results from the literature showed that people with MS reported that they used CAM from 27 to 100%. The major reasons for choosing CAM were as follows: conventional treatment was not effective, anecdotal reports of CAM's help, and doctor referral. The types of CAM reported by people with MS included exercise, vitamins, herbal and mineral supplements, relaxation techniques, acupuncture, cannabis and massage. The major symptoms treated by CAM as noted in the literature were pain, fatigue and stress. There is a need for further research to evaluate the effectiveness of CAM with MS patients and their application by occupational therapists. The limitation of this literature review was the low response rate in many of the surveys reported. 2009 John Wiley & Sons, Ltd

CAM use in dermatology. Is there a potential role for honey, green tea, and vitamin C?

Science.gov (United States)

Barbosa, Naiara S; Kalaaji, Amer N

2014-02-01

Complementary and alternative medicine (CAM) is a group of non-traditional medical practices that includes natural products, manipulations, and mind and body medicine. CAM use has grown and become popular among patients. In dermatology, honey, green tea, and vitamin C have been used as topical treatments for a variety of diseases. We performed a systematic review to explore the cutaneous effects of each of these three products. Honey's unique antibacterial, anti-inflammatory, and antioxidant properties were shown to contribute to wound healing, especially in ulcers and burns. Green tea, among many health benefits, demonstrated protection from ultraviolet-induced events, such as photoimmunosuppression and skin cancer growth. Vitamin C, known for its antioxidant properties and key role in collagen production, has been shown to produce positive effects on skin hyperpigmentation and aging. Future large well-designed clinical trials are needed in order to further investigate the potential of these agents as dermatological therapies. Copyright © 2013 Elsevier Ltd. All rights reserved.

Comparative evaluation of RetCam vs. gonioscopy images in congenital glaucoma.

Science.gov (United States)

Azad, Raj V; Chandra, Parijat; Chandra, Anuradha; Gupta, Aparna; Gupta, Viney; Sihota, Ramanjit

2014-02-01

To compare clarity, exposure and quality of anterior chamber angle visualization in congenital glaucoma patients, using RetCam and indirect gonioscopy images. Cross-sectional study Participants. Congenital glaucoma patients over age of 5 years. A prospective consecutive pilot study was done in congenital glaucoma patients who were older than 5 years. Methods used are indirect gonioscopy and RetCam imaging. Clarity of the image, extent of angle visible and details of angle structures seen were graded for both methods, on digitally recorded images, in each eye, by two masked observers. Image clarity, interobserver agreement. 40 eyes of 25 congenital glaucoma patients were studied. RetCam image had excellent clarity in 77.5% of patients versus 47.5% by gonioscopy. The extent of angle seen was similar by both methods. Agreement between RetCam and gonioscopy images regarding details of angle structures was 72.50% by observer 1 and 65.00% by observer 2. There was good agreement between RetCam and indirect gonioscopy images in detecting angle structures of congenital glaucoma patients. However, RetCam provided greater clarity, with better quality, and higher magnification images. RetCam can be a useful alternative to gonioscopy in infants and small children without the need for general anesthesia.

Family medicine residency program directors attitudes and knowledge of family medicine CAM competencies.

Science.gov (United States)

Gardiner, Paula; Filippelli, Amanda C; Lebensohn, Patricia; Bonakdar, Robert

2013-01-01

Little is known about the incorporation of integrative medicine (IM) and complementary and alternative medicine (CAM) into family medicine residency programs. The Society for Teachers of Family Medicine (STFM) approved a set of CAM/IM competencies for family medicine residencies. We hope to evaluate whether residency programs are implementing such competencies into their curriculum using an online survey tool. We also hope to assess the knowledge and attitudes of Residency Directors (RDs) on the CAM/IM competencies. A survey was distributed by the Council of Academic Family Medicine (CAFM) Educational Research Alliance to RDs via e-mail. The survey was distributed to 431 RDs. Of those who received it, 212 responded, giving a response rate of 49.1%. Questions assessed the knowledge and attitudes of CAM/IM competencies and incorporation of CAM/IM into the residency curriculum. Forty-five percent of RDs were aware of the competencies. In terms of RD attitudes, 58% reported that CAM/IM is an important component of residents' curriculum; yet, 60% report not having specific learning objectives for CAM/IM in their residency curriculum. Among all programs, barriers to CAM/IM implementation included time in residents' schedules (77%); faculty training (75%); access to CAM experts (43%); lack of reimbursement (43%); and financial resources (29%). While many RDs are aware of the STFM CAM/IM competencies and acknowledge their role in residence education, there are many barriers that prevent residencies from implementing the STFM CAM/IM competencies. © 2013 Elsevier Inc. All rights reserved.

Integration of CAM and CNC operation through code editing and manipulation

International Nuclear Information System (INIS)

Rosli Darmawan; Shalina Sheik Muhammad

2004-01-01

The IT technology for engineering design and manufacturing has gone through significant advancement for the last 30 years. It is widely acknowledged that IT would provide competitive advantage for engineering company in term of production cycle, productivity and efficiency. The recent development in this area is on the total system integration. While standard off-shelf CAD/CAM/CNC software and hardware packages would provide solution for system integration, more often than not users will stumble upon compatibility problems. Moreover, most of the integration deals with CAD and CAM systems. CNC integration has not been fully developed. Users always found problems in the integration of CAM and CNC machine due to the different level of technological development. CNC codes have not fundamentally progressed in the last 50 years, while CAD/CAM software packages have undergone massive evolution and improvement. This paper discusses a practical solution of CAM and CNC integration through code editing and manipulation within the CAM system in order to comply with the CNC machine requirements. (Author)

Pattern and predictors of complementary and alternative medicine (CAM) use among pediatric patients with epilepsy.

Science.gov (United States)

Doering, Jan H; Reuner, Gitta; Kadish, Navah E; Pietz, Joachim; Schubert-Bast, Susanne

2013-10-01

Parents of pediatric patients with chronic conditions such as epilepsy increasingly opt for complementary and alternative medicine (CAM). However, data on the pattern and reasons of CAM use in childhood epilepsy are scarce. The objectives of this study were as follows: first, to characterize CAM use among pediatric patients with epilepsy by assessing its spectrum, prevalence, costs, and frequency of use; second, to evaluate the influence of CAM use on compliance and satisfaction with conventional care as well as to explore parent-child neurologist communication concerning CAM; and third, to investigate predictors of CAM use. A postal survey was administered to all parents of pediatric outpatients with epilepsy aged 6 to 12, who have received treatment at the neuropediatric outpatient clinic of the University Children's Hospital Heidelberg between 2007 and 2009. One hundred thirty-two of the 297 distributed questionnaires were suitable for inclusion in statistical analysis (44.7%). Forty-nine participants indicated that their children used CAM during the previous year (37.1%). Thirty different types of CAM were used, with homeopathy (55.1%), osteopathy (24.5%), and kinesiology (16.3%) being the most commonly named. A mean of 86€ (0€-500€) and 3h (1 h-30 h) per month was committed to CAM treatment. Only 53% of the users informed their child neurologist of the additional CAM treatment, while 85.6% of all parents wished to discuss CAM options with their child neurologist. Seventy-five percent of users considered the CAM treatment effective. Among the participants most likely to seek CAM treatment are parents whose children show a long duration of epileptic symptoms, parents who make use of CAM treatment themselves, and parents who value a holistic and natural treatment approach. A substantial portion of pediatric patients with epilepsy receive CAM treatment. The high prevalence of use and significant level of financial and time resources spent on CAM indicate the

Incorporation of CAD/CAM Restoration Into Navy Dentistry

Science.gov (United States)

2017-09-26

CAD/CAM Computer-aided design /Computer-assisted manufacturing CDT Common Dental Terminology DENCAS Dental Common Access System DTF Dental...to reduce avoidable dental emergencies for deployed sailors and marines. Dental Computer-aided design /Computer-assisted manufacturing (CAD/CAM...this time by allowing for rapid scanning, designing , development, and production of dental restorations. Using this technology gives dentists the

Experimentally induced cam impingement in the sheep hip.

Science.gov (United States)

Siebenrock, Klaus A; Fiechter, Ruth; Tannast, Moritz; Mamisch, Tallal C; von Rechenberg, Brigitte

2013-04-01

Sheep hips have a natural non-spherical femoral head similar to a cam-type deformity in human beings. By performing an intertrochanteric varus osteotomy, cam-type femoro-acetabular impingement (FAI) during flexion can be created. We tested the hypotheses that macroscopic lesions of the articular cartilage and an increased Mankin score (MS) can be reproduced by an experimentally induced cam-type FAI in this ovine in vivo model. Furthermore, we hypothesized that the MS increases with longer ambulatory periods. Sixteen sheep underwent unilateral intertrochanteric varus osteotomy of the hip with the non-operated hip as a control. Four sheep were sacrificed after 14, 22, 30, and 38-weeks postoperatively. We evaluated macroscopic chondrolabral alterations, and recorded the MS, based on histochemical staining, for each ambulatory period. A significantly higher prevalence of macroscopic chondrolabral lesions was found in the impingement zone of the operated hips. The MS was significantly higher in the acetabular/femoral cartilage of the operated hips. Furthermore, these scores increased as the length of the ambulatory period increased. Cam-type FAI can be induced in an ovine in vivo model. Localized chondrolabral degeneration of the hip, similar to that seen in humans (Tannast et al., Clin Orthop Relat Res 2008; 466: 273-280; Beck et al., J Bone Joint Surg Br 2005; 87: 1012-1018), can be reproduced. This experimental sheep model can be used to study cam-type FAI. Copyright © 2012 Orthopaedic Research Society.

Optimising the cam profile of an electronic unit pump for a heavy-duty diesel engine

International Nuclear Information System (INIS)

Qiu, Tao; Dai, Hefei; Lei, Yan; Cao, Chunlei; Li, Xuchu

2015-01-01

For a fuel system with a tangent cam or a constant-velocity cam, the peak injection pressure continues to rise as the injection duration increases, but overly high peak pressures induce mechanical loads and wear, limiting the maximum engine speed and injection quantity. To improve the performance of an EUP (Electronic Unit Pump) fuel system for heavy-duty diesel engines, this work proposes a new pump cam, namely the constant-pressure cam. It helps the EUP run at a higher speed and deliver larger fuel quantities while maintaining a constant peak injection pressure, which improves the power of the heavy-duty diesel engine. A model based on the EUP was built to determine the three constraints for optimising the constant-pressure cam: 1) the pump pressure should equal the nozzle pressure; 2) the cam speed should decrease with the increase in the injection duration; and 3) the cam acceleration gradient should be zero. An EUP system was tested with the tangent cam and the optimised cam under different conditions. The experimental results show that the EUP system with the optimised cam delivers more injection quantity and runs at higher engine speeds while maintaining the same peak pressure as the tangent cam. - Highlights: • We propose a constant-pressure cam to improve the power of heavy-duty diesel engine. • We deduce three constraints for the CP (constant-peak pressure) cam based on a model. • The EUP system with the new cam works well under higher engine speed. • The peak pressure of the constant-pressure cam fuel system maintains high

Fiber-optical switch using cam-micromotor driven by scratch drive actuators

Science.gov (United States)

Kanamori, Y.; Aoki, Y.; Sasaki, M.; Hosoya, H.; Wada, A.; Hane, K.

2005-01-01

We fabricated a 1 × 1 fiber-optic switch using a cam-micromotor driven by scratch drive actuators (SDAs). Using the cam-micromotor, mechanical translation and precise positioning of an optical fiber were performed. An optical fiber of diameter 50 µm was bent and pushed out with a cam-mechanism driven by the SDAs fabricated by surface micromachining. The maximum rotation speed of the cam-micromotor was 7.5 rpm at a driving frequency of 1.5 kHz. The transient time of the switch to attenuate coupling efficiency less than -40 dB was around 10 ms.

"Chair Stand Test" as Simple Tool for Sarcopenia Screening in Elderly Women.

Science.gov (United States)

Pinheiro, P A; Carneiro, J A O; Coqueiro, R S; Pereira, R; Fernandes, M H

2016-01-01

To investigate the association between sarcopenia and "chair stand test" performance, and evaluate this test as a screening tool for sarcopenia in community-dwelling elderly women. Cross-sectional Survey. 173 female individuals, aged ≥ 60 years and living in the urban area of the municipality of Lafaiete Coutinho, Bahia's inland, Brazil. The association between sarcopenia (defined by muscle mass, strength and/or performance loss) and performance in the "chair stand test" was tested by binary logistic regression technique. The ROC curve parameters were used to evaluate the diagnostic power of the test in sarcopenia screening. The significance level was set at 5 %. The model showed that the time spent for the "chair stand test" was positively associated (OR = 1.08; 95% CI = 1.01 - 1.16, p = 0.024) to sarcopenia, indicating that, for each 1 second increment in the test performance, the sarcopenia's probability increased by 8% in elderly women. The cut-off point that showed the best balance between sensitivity and specificity was 13 seconds. The performance of "chair stand test" showed predictive ability for sarcopenia, being an effective and simple screening tool for sarcopenia in elderly women. This test could be used for screening sarcopenic elderly women, allowing early interventions.

Political Leadership in Parliament: The Role of Select Committee Chairs in the UK House of Commons

Directory of Open Access Journals (Sweden)

Alexandra Kelso

2016-06-01

Full Text Available Concepts of political leadership have been applied sparingly to parliaments, and not at all to the study of House of Commons select committees in the UK Parliament, where analysis has largely focused on their institutional capacity to scrutinise government and hold it to account. Yet examining these committees through a political leadership lens illuminates the complex role of committee chairs, a role which was significantly reshaped in 2010 with a shift to election of chairs by the whole House. This article analyses select committee chairs through the lens of political leadership, and draws on a series of interviews with chairs in order to delineate the nature of the political leadership they perform. It argues that, as chairs are now increasingly important parliamentary and policy actors, our understanding of them is significantly advanced by conceptualising their role as one of parliamentary political leadership, and that this in turn enriches our analytical toolkit when it comes to the study of parliaments.

Ecohealth Chair on Human and Animal Health in Protected ...

International Development Research Centre (IDRC) Digital Library (Canada)

This has led to more frequent interaction and conflict between human populations and wildlife. ... Applying ecohealth research to benefit local communities The Chair's ... to encompass relevant social, economic, and environmental dimensions.

Comparative evaluation of RetCam vs. gonioscopy images in congenital glaucoma

Directory of Open Access Journals (Sweden)

Raj V Azad

2014-01-01

Full Text Available Purpose: To compare clarity, exposure and quality of anterior chamber angle visualization in congenital glaucoma patients, using RetCam and indirect gonioscopy images. Design: Cross-sectional study Participants. Congenital glaucoma patients over age of 5 years. Materials and Methods: A prospective consecutive pilot study was done in congenital glaucoma patients who were older than 5 years. Methods used are indirect gonioscopy and RetCam imaging. Clarity of the image, extent of angle visible and details of angle structures seen were graded for both methods, on digitally recorded images, in each eye, by two masked observers. Outcome Measures: Image clarity, interobserver agreement. Results: 40 eyes of 25 congenital glaucoma patients were studied. RetCam image had excellent clarity in 77.5% of patients versus 47.5% by gonioscopy. The extent of angle seen was similar by both methods. Agreement between RetCam and gonioscopy images regarding details of angle structures was 72.50% by observer 1 and 65.00% by observer 2. Conclusions: There was good agreement between RetCam and indirect gonioscopy images in detecting angle structures of congenital glaucoma patients. However, RetCam provided greater clarity, with better quality, and higher magnification images. RetCam can be a useful alternative to gonioscopy in infants and small children without the need for general anesthesia.

Pharmacy practice department chairs' perspectives on part-time faculty members.

Science.gov (United States)

Fjortoft, Nancy; Winkler, Susan R; Mai, Thy

2012-05-10

To identify the benefits and consequences of having part-time faculty members in departments of pharmacy practice from the department chair's perspective. A stratified purposive sample of 12 pharmacy practice department chairs was selected. Eleven telephone interviews were conducted. Two investigators independently read interview notes and categorized and enumerated responses to determine major themes using content analysis. The investigators jointly reviewed the data and came to consensus on major themes. Benefits of allowing full-time faculty members to reduce their position to part-time included faculty retention and improved individual faculty work/life balance. Consequences of allowing part-time faculty positions included the challenges of managing individual and departmental workloads, the risk of marginalizing part-time faculty members, and the challenges of promotion and tenure issues. All requests to switch to part-time status were faculty-driven and most were approved. There are a variety of benefits and consequences of having part-time faculty in pharmacy practice departments from the chair's perspective. Clear faculty and departmental expectations of part-time faculty members need to be established to ensure optimal success of this working arrangement.

Analysis of sitting forces on stationary chairs for daily activities.

Science.gov (United States)

Hu, Lingling; Tackett, Bob; Tor, Onder; Zhang, Jilei

2016-04-01

No literature related to the study of sitting forces on chairs sat on by people who weighed over 136 kg was found. The Business Institutional Furniture Manufactures Association needs force data for development of performance test standards to test chairs for users who weigh up to 181 kg. 20 participants who weighed from 136 to 186 kg completed 6 tasks on an instrumented chair in the sequence of sitting down, remaining seated and rising. Effects of sitting motion, armrest use and seat cushion thickness on vertical sitting forces and centre-of-force were investigated. Results indicated hard sitting down yielded the highest sitting force of 213% in terms of participants' body weights. Armrest use affected sitting forces of normal sitting down, but not of rising and hard sitting down. Cushion thickness affected sitting forces of normal and hard sitting down and shifting, but not of rising, static seating or stretching backward situations. Practitioner Summary: Results of the sitting force and centre-of-force data obtained for this research can help furniture manufacturers develop new product performance test standards for creating reliable engineering design and manufacturing quality and durable products to meet a niche market need.

Evaluation of complementary-alternative medicine (CAM) questionnaire development for Indonesian clinical psychologists: A pilot study.

Science.gov (United States)

Liem, Andrian; Newcombe, Peter A; Pohlman, Annie

2017-08-01

This study aimed to evaluate questionnaire development to measure the knowledge of Complementary-Alternative Medicine (CAM), attitudes towards CAM, CAM experiences, and CAM educational needs of clinical psychologists in Indonesia. A 26-item questionnaire was developed through an extensive literature search. Data was obtained from provisional psychologists from the Master of Professional Clinical Psychology programs at two established public universities in urban areas of Indonesia. To validate the questionnaire, panel reviews by executive members of the Indonesian Clinical Psychology Association (ICPA), experts in health psychology, and experts in public health and CAM provided their professional judgements. The self-reporting questionnaire consisted of four scales including: knowledge of CAM (6 items), attitudes towards CAM (10 items), CAM experiences (4 items), and CAM educational needs (6 items). All scales, except CAM Experiences, were assessed on a 7-point Likert scale. Sixty provisional psychologists were eligible to complete the questionnaire with a response rate of 73% (N=44). The results showed that the CAM questionnaire was reliable (Cronbach's coefficient alpha range=0.62-0.96; item-total correlation range=0.14-0.92) and demonstrated content validity. Following further psychometric evaluation, the CAM questionnaire may provide the evidence-based information to inform the education and practice of Indonesian clinical psychologists. Copyright © 2017 Elsevier Ltd. All rights reserved.

Demand for CAM Practice at Hospitals in Japan: A Population Survey in Mie Prefecture

Directory of Open Access Journals (Sweden)

Toshihiro Togo

2011-01-01

Full Text Available Complementary and alternative medicine (CAM therapies have been provided at hospitals along with conventional medicine in industrialized nations. Previous studies conducted in Japan revealed high proportion of Japanese had experience of using CAM, but failed to discuss how it should be provided. The present study aims to clarify the demand for CAM practice at hospitals in Japan. A questionnaire consisting of 41 questions was mailed to 10 000 adults randomly selected from the electoral roll of Mie prefecture, Japan in January 2007. The questionnaire asked the subjects about demand for CAM practice at hospitals, types of CAM therapy to be provided and associated reasons. Sociodemographic characteristics, perceived health status, experience and purpose of CAM use, and information resource for CAM were also surveyed. Completed answers were collected from 2824 (28.6% respondents. Two thousand and nineteen (71.5% of the respondents demanded CAM practice at hospitals with the most likely reason of “patients can receive treatment under the guidance of a physicians”. The three most popular CAM therapies were Kampo, acupressure/massage/Shiatsu and acupuncture/moxibustion. The demand was positively associated with gender, ages of 40–59 years, annual household incomes of 5–7 million yen, occupation of specialist and technical workers and sales workers and poor health status. Higher demand was observed among those who used both CAM and conventional medical therapies for curative purposes. In conclusion, Japanese show a high demand for CAM practice, hoping to use CAM for curative purposes with monitoring by physicians at hospitals.

Evolution of CAM and C4 carbon-concentrating mechanisms

Science.gov (United States)

Keeley, Jon E.; Rundel, Philip W.

2003-01-01

Mechanisms for concentrating carbon around the Rubisco enzyme, which drives the carbon-reducing steps in photosynthesis, are widespread in plants; in vascular plants they are known as crassulacean acid metabolism (CAM) and C4 photosynthesis. CAM is common in desert succulents, tropical epiphytes, and aquatic plants and is characterized by nighttime fixation of CO2. The proximal selective factor driving the evolution of this CO2-concentrating pathway is low daytime CO2, which results from the unusual reverse stomatal behavior of terrestrial CAM species or from patterns of ambient CO2 availability for aquatic CAM species. In terrestrials the ultimate selective factor is water stress that has selected for increased water use efficiency. In aquatics the ultimate selective factor is diel fluctuations in CO2 availability for palustrine species and extreme oligotrophic conditions for lacustrine species. C4 photosynthesis is based on similar biochemistry but carboxylation steps are spatially separated in the leaf rather than temporally as in CAM. This biochemical pathway is most commonly associated with a specialized leaf anatomy known as Kranz anatomy; however, there are exceptions. The ultimate selective factor driving the evolution of this pathway is excessively high photorespiration that inhibits normal C3 photosynthesis under high light and high temperature in both terrestrial and aquatic habitats. CAM is an ancient pathway that likely has been present since the Paleozoic era in aquatic species from shallow-water palustrine habitats. While atmospheric CO2 levels have undoubtedly affected the evolution of terrestrial plant carbon-concentrating mechanisms, there is reason to believe that past atmospheric changes have not played as important a selective role in the aquatic milieu since palustrine habitats today are not generally carbon sinks, and the selective factors driving aquatic CAM are autogenic. Terrestrial CAM, in contrast, is of increasing selective value under

Bourdieu, Department Chairs and the Reform of Science Education

Science.gov (United States)

Melville, Wayne; Hardy, Ian; Bartley, Anthony

2011-11-01

Using the insights of the French sociologist, Pierre Bourdieu, this article considers the role of the science department chair in the reform of school science education. Using Bourdieu's 'thinking tools' of 'field', 'habitus' and 'capital', we case study the work of two teachers who both actively pursue the teaching and learning of science as inquiry. One teacher, Dan, has been a department chair since 2000, and has actively encouraged his department to embrace science as inquiry. The other teacher, Leslie, worked for one year in Dan's department before being transferred to another school where science teaching continues to be more traditional. Our work suggests that there are three crucial considerations for chairs seeking to lead the reform of science teaching within their department. The first of these is the development of a reform-minded habitus, as this appears to be foundational to the capital that can be expended in the leadership of reform. The second is an understanding of how to wield power and position in the promotion of reform. The third is the capacity to operate simultaneously and strategically within, and across, two fields; the departmental field and the larger science education field. This involves downplaying administrative logics, and foregrounding more inquiry-focused logics as a vehicle to challenge traditional science-teaching dispositions-the latter being typically dominated by concerns about curriculum 'coverage'.

Fracture strength testing of crowns made of CAD/CAM composite resins.

Science.gov (United States)

Okada, Ryota; Asakura, Masaki; Ando, Akihiro; Kumano, Hirokazu; Ban, Seiji; Kawai, Tatsushi; Takebe, Jun

2018-03-28

The purpose of this study was to ascertain whether computer aided design/computer aided manufacturing (CAD/CAM) composite resin crowns have sufficient strength to withstand the bite force of the molar teeth. The null hypothesis was that the fracture strength of CAD/CAM composite resin crowns is lower than the average maximum bite force of the molar tooth. The crowns, which shape is the right maxillary first molar, were fabricated using four CAD/CAM blanks made of composite resins (Block HC: HC, KZR-CAD HR: HR, KZR-CAD HR2: HR2, Avencia Block: AVE) and one CAD/CAM blank made of lithium disilicate glass-ceramic (IPS e.max CAD: IPS), which was used as a control. Fracture strength of fabricated crowns bonded to metal abutment and biaxial flexural strength of the materials were evaluated. The results of fracture strength test and biaxial flexural strength test showed different tendencies. The fracture strength of CAD/CAM composite resin crowns except HC ranged from 3.3kN to 3.9kN, and was similar to that of IPS (3.3kN). In contrast, biaxial flexural strength of CAD/CAM composite resins ranged from 175MPa to 247MPa, and was significantly lower than that of IPS (360MPa). All CAD/CAM composite resin crowns studied presented about 3-4 times higher fracture strength than the average maximum bite force of the molar tooth (700-900N), which result leads to the conclusion that CAD/CAM composite resin crowns would have sufficient strength to withstand the bite force of the molar teeth. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Bonding Effectiveness of Luting Composites to Different CAD/CAM Materials.

Science.gov (United States)

Peumans, Marleen; Valjakova, Emilija Bajraktarova; De Munck, Jan; Mishevska, Cece Bajraktarova; Van Meerbeek, Bart

To evaluate the influence of different surface treatments of six novel CAD/CAM materials on the bonding effectiveness of two luting composites. Six different CAD/CAM materials were tested: four ceramics - Vita Mark II; IPS Empress CAD and IPS e.max CAD; Celtra Duo - one hybrid ceramic, Vita Enamic, and one composite CAD/CAM block, Lava Ultimate. A total of 60 blocks (10 per material) received various mechanical surface treatments: 1. 600-grit SiC paper; 2. sandblasting with 30-μm Al2O3; 3. tribochemical silica coating (CoJet). Subsequent chemical surface treatments involved either no further treatment (control), HF acid etching (HF), silanization (S, or HF acid etching followed by silanization (HF+S). Two specimens with the same surface treatment were bonded together using two dual-curing luting composites: Clearfil Esthetic Cement (self-etching) or Panavia SA Cement (self-adhesive). After 1 week of water storage, the microtensile bond strength of the sectioned microspecimens was measured and the failure mode was evaluated. The bonding performance of the six CAD/CAM materials was significantly influenced by surface treatment (linear mixed models, p CAD (p = 0.0115), and Lava Ultimate (p CAD/CAM materials: Vita Mark II and IPS Empress CAD: S, HF+S; Celtra Duo: HF, HF+S; IPS e.max CAD: HF+S; Vita Enamic: HF+S, S. For Lava Ultimate, the highest bond strengths were obtained with HF, S, HF+S. Failure analysis showed a relation between bond strength and failure type: more mixed failures were observed with higher bond strengths. Mainly adhesive failures were noticed if no further surface treatment was done. The percentage of adhesive failures was higher for CAD/CAM materials with higher flexural strength (Celtra Duo, IPS e.max CAD, and Lava Ultimate). The bond strength of luting composites to novel CAD/CAM materials is influenced by surface treatment. For each luting composite, an adhesive cementation protocol can be specified in order to obtain the highest bond to the

Effectiveness and efficiency of a CAD/CAM orthodontic bracket system.

Science.gov (United States)

Brown, Matthew W; Koroluk, Lorne; Ko, Ching-Chang; Zhang, Kai; Chen, Mengqi; Nguyen, Tung

2015-12-01

The first straight-wire appliance was introduced over 40 years ago to increase the consistency and efficiency of orthodontic treatment. More recently, computer-aided design and computer-aided manufacturing (CAD/CAM) technology has been used to create individualized orthodontic appliances. The purpose of this study was to investigate the clinical effectiveness and efficiency of CAD/CAM customized orthodontic appliances compared with direct and indirect bonded stock orthodontic brackets. This retrospective study included 3 treatment groups: group 1 patients were direct bonded with self-ligating appliances, group 2 patients were indirect bonded with self-ligating appliances, and group 3 patients were indirect bonded with CAD/CAM self-ligating appliances. Complete pretreatment and posttreatment records were obtained for all patients. The American Board of Orthodontics (ABO) Discrepancy Index was used to evaluate the pretreatment records, and the posttreatment outcomes were analyzed using the ABO Cast-Radiograph Evaluation. All data collection and analysis were completed by 1 evaluator. There were no statistically significant differences in the ABO Discrepancy Index or the ABO Cast-Radiograph Evaluation among the groups. Treatment times for the 3 groups were significantly different; the CAD/CAM group was the shortest at 13.8 ± 3.4 months, compared with 21.9 ± 5.0 and 16.9 ± 4.1 months for the direct bonded and indirect bonded groups, respectively. The number of treatment appointments for the CAD/CAM group was significantly fewer than for the direct bonded group. The CAD/CAM orthodontic bracket system evaluated in this study was as effective in treatment outcome measures as were standard brackets bonded both directly and indirectly. The CAD/CAM appliance was more efficient in regard to treatment duration, although the decrease in total archwire appointments was minimal. Further investigation is needed to better quantify the clinical benefits of CAD/CAM orthodontic

SenseCam: A new tool for memory rehabilitation?

Science.gov (United States)

Dubourg, L; Silva, A R; Fitamen, C; Moulin, C J A; Souchay, C

2016-12-01

The emergence of life-logging technologies has led neuropsychologist to focus on understanding how this new technology could help patients with memory disorders. Despite the growing number of studies using life-logging technologies, a theoretical framework supporting its effectiveness is lacking. This review focuses on the use of life-logging in the context of memory rehabilitation, particularly the use of SenseCam, a wearable camera allowing passive image capture. In our opinion, reviewing SenseCam images can be effective for memory rehabilitation only if it provides more than an assessment of prior occurrence in ways that reinstates previous thoughts, feelings and sensory information, thus stimulating recollection. Considering the fact that, in memory impairment, self-initiated processes are impaired, we propose that the environmental support hypothesis can explain the value of SenseCam for memory retrieval. Twenty-five research studies were selected for this review and despite the general acceptance of the value of SenseCam as a memory technique, only a small number of studies focused on recollection. We discuss the usability of this tool to improve episodic memory and in particular, recollection. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

CAM and stack air sampler design guide

International Nuclear Information System (INIS)

Phillips, T.D.

1994-01-01

About 128 air samplers and CAMs presently in service to detect and document potential radioactive release from 'H' and 'F' area tank farm ventilation stacks are scheduled for replacement and/or upgrade by Projects S-5764, S-2081, S-3603, and S-4516. The seven CAMs scheduled to be upgraded by Project S-4516 during 1995 are expected to provide valuable experience for the three remaining projects. The attached document provides design guidance for the standardized High Level Waste air sampling system

Verification of Kaplan turbine cam curves realization accuracy at power plant

Directory of Open Access Journals (Sweden)

Džepčeski Dane

2016-01-01

Full Text Available Sustainability of approximately constant value of Kaplan turbine efficiency, for relatively large net head changes, is a result of turbine runner variable geometry. Dependence of runner blades position change on guide vane opening represents the turbine cam curve. The cam curve realization accuracy is of great importance for the efficient and proper exploitation of turbines and consequently complete units. Due to the reasons mentioned above, special attention has been given to the tests designed for cam curves verification. The goal of this paper is to provide the description of the methodology and the results of the tests performed in the process of Kaplan turbine cam curves verification.

CAM use in pediatric neurology: an exploration of concurrent use with conventional medicine.

Science.gov (United States)

Galicia-Connolly, Elaine; Adams, Denise; Bateman, Justin; Dagenais, Simon; Clifford, Tammy; Baydala, Lola; King, W James; Vohra, Sunita

2014-01-01

Previous studies have found that up to 60% of children with neurologic conditions have tried complementary and alternative medicine (CAM). To assess the use of CAM among patients presenting to neurology clinics at two academic centers in Canada. A survey instrument was developed to inquire about use of CAM products and therapies, including reasons for use, perceived helpfulness, and concurrent use with conventional medicine, and administered to patients or their parents/guardians at the Stollery Children's Hospital in Edmonton and the Children's Hospital of Eastern Ontario (CHEO) in Ottawa. Overall CAM use at the Stollery was 78%, compared to 48% at CHEO. The most common CAM products used were multi-vitamins (84%), vitamin C (37%), homeopathic remedies (24%), and fish oil/omega 3 s (22%). The most common CAM practices used were massage (47%), chiropractic (37%), faith healing (18%), aromatherapy (16%), homeopathy (16%), and relaxation (16%). Many patients used CAM products at the same time as conventional medicine but just over half (57%) discussed this concurrent use with their physician. CAM use is common in pediatric neurology patients and most respondents felt that it was helpful, with few or no harms associated. However, this use is often undisclosed, increasing possibility of interactions with conventional drugs. We urge clinicians to inquire about CAM use during routine history taking at every patient visit. Parents would clearly like more information about CAM from their specialty clinics; such information would be easier to share if more primary data were available about the safety and effectiveness of commonly used therapies.

Report from the David Peikoff Chair of Deafness Studies: January 1989 through August 1991.

Science.gov (United States)

Schein, Jerome D.

1991-01-01

Following a brief biography of David Peikoff, this paper describes the first occupant of the David Peikoff Chair of Deafness Studies, Jerome D. Schein. The chair's research agenda on mediated communication and demography of impaired hearing are described, as well as organization of an international conference, public addresses, and technical…

Canada-South Africa trilateral Research Chair in climate change ...

International Development Research Centre (IDRC) Digital Library (Canada)

Canada-South Africa trilateral Research Chair in climate change and ... Decreasing food availability for wildlife is likely to exacerbate the impacts of climate change ... IWRA/IDRC webinar on climate change and adaptive water management.

Prevalence of cam hip shape morphology: a systematic review.

Science.gov (United States)

Dickenson, E; Wall, P D H; Robinson, B; Fernandez, M; Parsons, H; Buchbinder, R; Griffin, D R

2016-06-01

Cam hip shape morphology is a recognised cause of femoroacetabular impingement (FAI) and is associated with hip osteoarthritis. Our aim was to systematically review the available epidemiological evidence assessing the prevalence of cam hip shape morphology in the general population and any studied subgroups including subjects with and without hip pain. All studies that reported the prevalence of cam morphology, measured by alpha angles, in subjects aged 18 and over, irrespective of study population or presence of hip symptoms were considered for inclusion. We searched AMED, MEDLINE, EMBASE, CINAHL and CENTRAL in October 2015. Two authors independently identified eligible studies and assessed risk of bias. We planned to pool data of studies considered clinically homogenous. Thirty studies met inclusion criteria. None of the included studies were truly population-based: three included non-representative subgroups of the general population, 19 included differing clinical populations, while eight included professional athletes. All studies were judged to be at high risk of bias. Due to substantial clinical heterogeneity meta analysis was not possible. Across all studies, the prevalence estimates of cam morphology ranged from 5 to 75% of participants affected. We were unable to demonstrate a higher prevalence in selected subgroups such as athletes or those with hip pain. There is currently insufficient high quality data to determine the true prevalence of cam morphology in the general population or selected subgroups. Well-designed population-based epidemiological studies that use homogenous case definitions are required to determine the prevalence of cam morphology and its relationship to hip pain. Copyright © 2016 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

CAM therapies among primary care patients using opioid therapy for chronic pain

Directory of Open Access Journals (Sweden)

Mundt Marlon P

2007-05-01

Full Text Available Abstract Background Complementary and alternative medicine (CAM is an increasingly common therapy used to treat chronic pain syndromes. However; there is limited information on the utilization and efficacy of CAM therapy in primary care patients receiving long-term opioid therapy. Method A survey of CAM therapy was conducted with a systematic sample of 908 primary care patients receiving opioids as a primary treatment method for chronic pain. Subjects completed a questionnaire designed to assess utilization, efficacy and costs of CAM therapies in this population. Results Patients were treated for a variety of pain problems including low back pain (38.4%, headaches (9.9%, and knee pain (6.5%; the average duration of pain was 16 years. The median morphine equivalent opioid dose was 41 mg/day, and the mean dose was 92 mg/day. Forty-four percent of the sample reported CAM therapy use in the past 12 months. Therapies utilized included massage therapy (27.3%, n = 248, chiropractic treatment (17.8%, n = 162, acupuncture (7.6%, n = 69, yoga (6.1%, n = 55, herbs and supplements (6.8%, n = 62, and prolotherapy (5.9%, n = 54. CAM utilization was significantly related to age female gender, pain severity income pain diagnosis of neck and upper back pain, and illicit drug use. Medical insurance covered chiropractic treatment (81.8% and prolotherapy (87.7%, whereas patients primarily paid for other CAM therapies. Over half the sample reported that one or more of the CAM therapies were helpful. Conclusion This study suggests CAM therapy is widely used by patients receiving opioids for chronic pain. Whether opioids can be reduced by introducing such therapies remains to be studied.

CAM therapies among primary care patients using opioid therapy for chronic pain.

Science.gov (United States)

Fleming, Sara; Rabago, David P; Mundt, Marlon P; Fleming, Michael F

2007-05-16

Complementary and alternative medicine (CAM) is an increasingly common therapy used to treat chronic pain syndromes. However; there is limited information on the utilization and efficacy of CAM therapy in primary care patients receiving long-term opioid therapy. A survey of CAM therapy was conducted with a systematic sample of 908 primary care patients receiving opioids as a primary treatment method for chronic pain. Subjects completed a questionnaire designed to assess utilization, efficacy and costs of CAM therapies in this population. Patients were treated for a variety of pain problems including low back pain (38.4%), headaches (9.9%), and knee pain (6.5%); the average duration of pain was 16 years. The median morphine equivalent opioid dose was 41 mg/day, and the mean dose was 92 mg/day. Forty-four percent of the sample reported CAM therapy use in the past 12 months. Therapies utilized included massage therapy (27.3%, n = 248), chiropractic treatment (17.8%, n = 162), acupuncture (7.6%, n = 69), yoga (6.1%, n = 55), herbs and supplements (6.8%, n = 62), and prolotherapy (5.9%, n = 54). CAM utilization was significantly related to age female gender, pain severity income pain diagnosis of neck and upper back pain, and illicit drug use. Medical insurance covered chiropractic treatment (81.8%) and prolotherapy (87.7%), whereas patients primarily paid for other CAM therapies. Over half the sample reported that one or more of the CAM therapies were helpful. This study suggests CAM therapy is widely used by patients receiving opioids for chronic pain. Whether opioids can be reduced by introducing such therapies remains to be studied.

Valve cam design using numerical step-by-step method

OpenAIRE

Vasilyev, Aleksandr; Bakhracheva, Yuliya; Kabore, Ousman; Zelenskiy, Yuriy

2014-01-01

This article studies the numerical step-by-step method of cam profile design. The results of the study are used for designing the internal combustion engine valve gear. This method allows to profile the peak efficiency of cams in view of many restrictions, connected with valve gear serviceability and reliability.

The Art of Chairing: What Deming Taught the Japanese and the Japanese Taught Me.

Science.gov (United States)

Rodd, Laurel Rasplica

2001-01-01

Reveals how a business model--based on the work of W. Edwards Deming--helped a foreign language department chair become a better leader. Outlines seven principles for department chairs: create constancy of purpose; change and improvement are ongoing; drive out fear; work with suppliers to continually improve the quality of incoming people,…

A Prospective, Multicenter Study of Complementary/Alternative Medicine (CAM) Utilization During Definitive Radiation for Breast Cancer

International Nuclear Information System (INIS)

Moran, Meena S.; Ma Shuangge; Jagsi, Reshma; Yang, Tzu-I Jonathan; Higgins, Susan A.; Weidhaas, Joanne B.; Wilson, Lynn D.; Lloyd, Shane; Peschel, Richard; Gaudreau, Bryant; Rockwell, Sara

2013-01-01

Purpose: Although complementary and alternative medicine (CAM) utilization in breast cancer patients is reported to be high, there are few data on CAM practices in breast patients specifically during radiation. This prospective, multi-institutional study was conducted to define CAM utilization in breast cancer during definitive radiation. Materials/Methods: A validated CAM instrument with a self-skin assessment was administered to 360 Stage 0-III breast cancer patients from 5 centers during the last week of radiation. All data were analyzed to detect significant differences between users/nonusers. Results: CAM usage was reported in 54% of the study cohort (n=194/360). Of CAM users, 71% reported activity-based CAM (eg, Reiki, meditation), 26% topical CAM, and 45% oral CAM. Only 16% received advice/counseling from naturopathic/homeopathic/medical professionals before initiating CAM. CAM use significantly correlated with higher education level (P<.001), inversely correlated with concomitant hormone/radiation therapy use (P=.010), with a trend toward greater use in younger patients (P=.066). On multivariate analysis, level of education (OR: 6.821, 95% CI: 2.307-20.168, P<.001) and hormones/radiation therapy (OR: 0.573, 95% CI: 0.347-0.949, P=.031) independently predicted for CAM use. Significantly lower skin toxicity scores were reported in CAM users vs nonusers, respectively (mild: 34% vs 25%, severe: 17% vs 29%, P=.017). Conclusion: This is the first prospective study to assess CAM practices in breast patients during radiation, with definition of these practices as the first step for future investigation of CAM/radiation interactions. These results should alert radiation oncologists that a large percentage of breast cancer patients use CAM during radiation without disclosure or consideration for potential interactions, and should encourage increased awareness, communication, and documentation of CAM practices in patients undergoing radiation treatment for breast

AFSC/FMA/CAMS Data Objects

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The CAMS system consists of a set of tables and packages that provide authentication services to all other North Pacific Groundfish and Halibut Observing Program...

Ceramic dental biomaterials and CAD/CAM technology: state of the art.

Science.gov (United States)

Li, Raymond Wai Kim; Chow, Tak Wah; Matinlinna, Jukka Pekka

2014-10-01

Ceramics are widely used as indirect restorative materials in dentistry because of their high biocompatibility and pleasing aesthetics. The objective is to review the state of the arts of CAD/CAM all-ceramic biomaterials. CAD/CAM all-ceramic biomaterials are highlighted and a subsequent literature search was conducted for the relevant subjects using PubMed followed by manual search. Developments in CAD/CAM technology have catalyzed researches in all-ceramic biomaterials and their applications. Feldspathic glass ceramic and glass infiltrated ceramic can be fabricated by traditional laboratory methods or CAD/CAM. The advent of polycrystalline ceramics is a direct result of CAD/CAM technology without which the fabrication would not have been possible. The clinical uses of these ceramics have met with variable clinical success. Multiple options are now available to the clinicians for the fabrication of aesthetic all ceramic restorations. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

CAD/CAM: improved design quality, increased productivity

Energy Technology Data Exchange (ETDEWEB)

Evans, D. E.; England, J.

1980-01-01

Maintaining productivity levels while assuring the quality of engineering products grows increasingly more difficult and costly for industries such as the energy industry which are heavily committed to product design. The man/machine interface made possible through the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology can be applied to the design process as a tool for increased control to assure the quality of the final engineering product. The quality-control aspects of CAD/CAM technology are addressed in this presentation.

User Experience of Office Chairs and Anthropometrics of Female Chinese and Hong Kong Chinese Office and Factory Workers

NARCIS (Netherlands)

Reitenbach, E.F.R.; Jochems, A.J.; Molenbroek, J.F.M.; Ball, R.; Eijk, D.J.

2008-01-01

In Hong Kong it was noticed that female office and factory workers use chairs that are oversized and can't support their sitting posture in a comfortable way. In order to set up general recommendations to design a more appropriate office chair, a research of the user experience of office chairs was

Grouping and analysis of chair quality and their basic elements

Directory of Open Access Journals (Sweden)

Skakić Dušan

2009-01-01

Full Text Available Both the scientific experience and the engineering practice indicate that the decision making processes in the course of solving complex designing problems require an analysis of a great number of different construction variants. These types of decision-making processes are time consuming and do not always result in the selection of an optimal solution. That is why the methods of numerical optimization are applied in a wide range of technical sciences to assist in the selection of the best solution. The first step in solving the problem by using the Finite element method is to determine the type of chair earmarked for modeling, and to determine the dimensions of the chair elements.

The Body Language Behaviours of the Chairs of the Disputes According to the Disputants

Science.gov (United States)

Caliskan, Nihat

2009-01-01

The perception form of the body language behaviours of the session chairs by disputants affects the efficiency of the process. Therefore, it is important to determine the effects of the mimic, gesture, physical appearance and tonality and accent of the chairs on disputants. That research was conducted to clarify how the disputants perceive the…

PulseCam: high-resolution blood perfusion imaging using a camera and a pulse oximeter.

Science.gov (United States)

Kumar, Mayank; Suliburk, James; Veeraraghavan, Ashok; Sabharwal, Ashutosh

2016-08-01

Measuring blood perfusion is important in medical care as an indicator of injury and disease. However, currently available devices to measure blood perfusion like laser Doppler flowmetry are bulky, expensive, and cumbersome to use. An alternative low-cost and portable camera-based blood perfusion measurement system has recently been proposed, but such camera-only system produces noisy low-resolution blood perfusion maps. In this paper, we propose a new multi-sensor modality, named PulseCam, for measuring blood perfusion by combining a traditional pulse oximeter with a video camera in a unique way to provide low noise and high-resolution blood perfusion maps. Our proposed multi-sensor modality improves per pixel signal to noise ratio of measured perfusion map by up to 3 dB and improves the spatial resolution by 2 - 3 times compared to best known camera-only methods. Blood perfusion measured in the palm using our PulseCam setup during a post-occlusive reactive hyperemia (PORH) test replicates standard PORH response curve measured using laser Doppler flowmetry device but with much lower cost and a portable setup making it suitable for further development as a clinical device.

Understanding dental CAD/CAM for restorations--accuracy from a mechanical engineering viewpoint.

Science.gov (United States)

Tapie, Laurent; Lebon, Nicolas; Mawussi, Bernardin; Fron-Chabouis, Hélène; Duret, Francois; Attal, Jean-Pierre

2015-01-01

As is the case in the field of medicine, as well as in most areas of daily life, digital technology is increasingly being introduced into dental practice. Computer-aided design/ computer-aided manufacturing (CAD/CAM) solutions are available not only for chairside practice but also for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental practice can be considered as the handling of devices and software processing for the almost automatic design and creation of dental restorations. However, dentists who want to use dental CAD/CAM systems often do not have enough information to understand the variations offered by such technology practice. Knowledge of the random and systematic errors in accuracy with CAD/CAM systems can help to achieve successful restorations with this technology, and help with the purchasing of a CAD/CAM system that meets the clinical needs of restoration. This article provides a mechanical engineering viewpoint of the accuracy of CAD/ CAM systems, to help dentists understand the impact of this technology on restoration accuracy.

The use of CAM and conventional treatments among primary care consulters with chronic musculoskeletal pain.

Science.gov (United States)

Artus, Majid; Croft, Peter; Lewis, Martyn

2007-05-04

Chronic musculoskeletal pain is the single most cited reason for use of complementary and alternative medicine (CAM). Primary care is the most frequent conventional medical service used by patients with pain in the UK. We are unaware, however, of a direct evidence of the extent of CAM use by primary care patients, and how successful they perceive it to be. To determine CAM use among patients with chronic musculoskeletal pain who have consulted about their pain in primary care. Face-to-face interview-based survey. Three general practices in North Staffordshire. Respondents to a population pain survey who had reported having musculoskeletal pain in the survey and who had consulted about their pain in primary care in the previous 12 months as well as consenting to further research and agreeing to an interview. Information was gathered about their pain and the use of all treatments for pain, including CAM, in the previous year. 138 interviews were completed. 116 participants (84%) had used at least one CAM treatment for pain in the previous year. 65% were current users of CAM. The ratio of over-the-counter CAM use to care from a CAM provider was 3:2. 111 participants (80%) had used conventional treatment. 95 (69%) were using a combination of CAM and conventional treatment. Glucosamine and fish oil were the most commonly used CAM treatments (38%, 35% respectively). Most CAM treatments were scored on average as being helpful, and users indicated that they intended to use again 87% of the CAM treatments they had already used. We provide direct evidence that most primary care consulters with chronic musculoskeletal pain have used CAM in the previous year, usually in combination with conventional treatments. The high prevalence and wide range of users experiences of benefit and harm from CAM strengthen the argument for more research into this type of medicine to quantify benefit and assess safety. The observation that most users of conventional medicine also used CAM

Spontaneous vaginal delivery in the birth-chair versus in the conventional dorsal position: a matched controlled comparison.

Science.gov (United States)

Scholz, H S; Benedicic, C; Arikan, M G; Haas, J; Petru, E

2001-09-17

The aim of the study was to assess the effect of a birth-chair on obstetric outcome. We reviewed the hospital records of 220 consecutive pregnant women who gave birth on a birth-chair at our institution. The control group consisted of 440 pregnant women who preceded and followed the index cases and who had spontaneous vaginal deliveries in the conventional dorsal supine position. The controls were matched for parity and for the attending mid-wife. Patients who delivered in the birth-chair had significantly lower rates of episiotomy and manual separation of the placenta. The umbilical blood cord pH was significantly higher in neonates of the birth-chair group. The duration of labour, rate of perineal and vaginal injury, Apgar scores and rate of admission to a neonatal intermediate care unit were not influenced by the mode of delivery. Our data support previous studies that a birth-chair delivery may be a safe alternative to conventional delivery in the supine position.

Does agreement on institutional values and leadership issues between deans and surgery chairs predict their institutions' performance?

Science.gov (United States)

Souba, Wiley W; Mauger, David; Day, David V

2007-03-01

To gain a better understanding of the values that medical school deans and surgery chairs consider most essential for effective leadership, to assess their perceptions of the values and leadership climate in their institutions, and to test the premise that agreement on leadership values and climate predict greater organizational effectiveness and performance. From June 2005 through March 2006, questionnaires designed to assess leadership core values and organizational leadership climate were mailed to medical school deans and surgery chairs of the 125 U.S. academic health centers. Institutional performance measures used were the National Institutes of Health (NIH) standing and U.S. News and World Report ranking of each institution. Sixty-eight surgery chairs (54%) and 60 deans (48%) returned surveys. Q-sort results on 38 positive leadership values indicated that integrity, trust, and vision were considered the most important core values for effective leadership by both chairs and deans. Both groups ranked business acumen, authority, and institutional reputation as least important. Deans consistently ranked the leadership climate as being healthier (more positive) than did their surgery chairs on multiple scale items: leadership is widely shared (P = .005), information is widely shared (P = .002), missions are aligned (P = .003), open communication is the norm (P = .009), good performance is rewarded (P = .01), teamwork is widely practiced (P = .01), and leaders are held accountable (P = 002). Tighter alignment between chairs and deans on core values and on the leadership climate scale correlated with higher school and department NIH standing and higher U.S. News and World Report medical school and hospital ranking (P leadership values, deans believe that a healthier leadership climate exists in their institutions than their surgery chairs do. The study findings suggest that tighter leadership alignment between deans and surgery chairs may predict a higher level of

Shared origins of a key enzyme during the evolution of C4 and CAM metabolism

Science.gov (United States)

Christin, Pascal-Antoine; Arakaki, Monica; Osborne, Colin P.; Bräutigam, Andrea; Sage, Rowan F.; Hibberd, Julian M.; Kelly, Steven; Covshoff, Sarah; Wong, Gane Ka-Shu; Hancock, Lillian; Edwards, Erika J.

2014-01-01

CAM and C4 photosynthesis are two key plant adaptations that have evolved independently multiple times, and are especially prevalent in particular groups of plants, including the Caryophyllales. We investigate the origin of photosynthetic PEPC, a key enzyme of both the CAM and C4 pathways. We combine phylogenetic analyses of genes encoding PEPC with analyses of RNA sequence data of Portulaca, the only plants known to perform both CAM and C4 photosynthesis. Three distinct gene lineages encoding PEPC exist in eudicots (namely ppc-1E1, ppc-1E2 and ppc-2), one of which (ppc-1E1) was recurrently recruited for use in both CAM and C4 photosynthesis within the Caryophyllales. This gene is present in multiple copies in the cacti and relatives, including Portulaca. The PEPC involved in the CAM and C4 cycles of Portulaca are encoded by closely related yet distinct genes. The CAM-specific gene is similar to genes from related CAM taxa, suggesting that CAM has evolved before C4 in these species. The similar origin of PEPC and other genes involved in the CAM and C4 cycles highlights the shared early steps of evolutionary trajectories towards CAM and C4, which probably diverged irreversibly only during the optimization of CAM and C4 phenotypes. PMID:24638902

Digital Dentistry — Digital Impression and CAD/CAM System Applications

Directory of Open Access Journals (Sweden)

Gabor Alin-Gabriel

2017-03-01

Full Text Available Digital imprint and computer-aided design/computer-aided manufacture (CAD/CAM systems offer several benefits compared to traditional techniques. The use of a CAD/CAM system to scan preparations and generate restorations in-office, removes a second appointment for the patient. The existence of precision benefits in using complete systems and chairside scanning systems, has been proven. CAD/CAM restorations have a good longevity and meet the accepted clinical parameters. New digital impression methods are presently accessible, and before long, the long-awaited goal of sparing patients of one the most unpleasant practices in clinical dentistry, acquiring dental impressions, will be exchanged by intraoral digital scanning. CAD/CAM systems existing nowadays, can feed data through accurate digital scans created from plaster models, straight to manufacturing systems that can shape ceramic or resin restorations with no requirement of a physical copy of the prepared, adjacent, and antagonist teeth.

Comparison of denture tooth movement between CAD-CAM and conventional fabrication techniques.

Science.gov (United States)

Goodacre, Brian J; Goodacre, Charles J; Baba, Nadim Z; Kattadiyil, Mathew T

2018-01-01

Data comparing the denture tooth movement of computer-aided design and computer-aided manufacturing (CAD-CAM) and conventional denture processing techniques are lacking. The purpose of this in vitro study was to compare the denture tooth movement of pack-and-press, fluid resin, injection, CAD-CAM-bonded, and CAD-CAM monolithic techniques for fabricating dentures to determine which process produces the most accurate and reproducible prosthesis. A total of 50 dentures were evaluated, 10 for each of the 5 groups. A master denture was fabricated and milled from prepolymerized poly(methyl methacrylate). For the conventional processing techniques (pack-and-press, fluid resin, and injection) a polyvinyl siloxane putty mold of the master denture was made in which denture teeth were placed and molten wax injected. The cameo surface of each wax-festooned denture was laser scanned, resulting in a standard tessellation language (STL) format file. The CAD-CAM dentures included 2 subgroups: CAD-CAM-bonded teeth in which the denture teeth were bonded into the milled denture base and CAD-CAM monolithic teeth in which the denture teeth were milled as part of the denture base. After all specimens had been fabricated, they were hydrated for 24 hours, and the cameo surface laser scanned. The preprocessing and postprocessing scan files of each denture were superimposed using surface-matching software. Measurements were made at 64 locations, allowing evaluation of denture tooth movement in a buccal, lingual, mesial-distal, and occlusal direction. The use of median and interquartile range values was used to assess accuracy and reproducibility. Levene and Kruskal-Wallis analyses of variance were used to evaluate differences between processing techniques (α=.05). The CAD-CAM monolithic technique was the most accurate, followed by fluid resin, CAD-CAM-bonded, pack-and-press, and injection. CAD-CAM monolithic technique was the most reproducible, followed by pack-and-press, CAD-CAM

The inducible CAM plants in putative lunar lander experiments

Science.gov (United States)

Burlak, Olexii; Zaetz, Iryna; Soldatkin, Olexii; Rogutskyy, Ivan; Danilchenko, Boris; Mikheev, Olexander; de Vera, Jean-Pierre; Vidmachenko, Anatolii; Foing, Bernard H.; Kozyrovska, Natalia

Precursory lunar lander experiments on growing plants in locker-based chambers will increase our understanding of effect of lunar conditions on plant physiology. The inducible CAM (Cras-sulacean Acid Metabolism)-plants are reasonable model for a study of relationships between environmental challenges and changes in plant/bacteria gene expression. In inducible CAM-plants the enzymatic machinery for the environmentally activated CAM switches on from a C3-to a full-CAM mode of photosynthesis in response to any stresses (Winter et al., 2008). In our study, Kalanchoe spp. are shown to be promising candidates for putative lunar experiments as resistant to irradiation and desiccation, especially after inoculation with a bacterial consortium (Boorlak et al., 2010). Within frames of the experiment we expect to get information about the functional activity of CAM-plants, in particular, its organogenesis, photosystem, the circadian regulation of plant metabolism on the base of data gaining with instrumental indications from expression of the reporter genes fused to any genes involved in vital functions of the plant (Kozyrovska et al., 2009). References 1. Winter K., Garcia M., Holtum J. (2008) J. Exp. Bot. 59(7):1829-1840 2. Bourlak O., Lar O., Rogutskyy I., Mikheev A., Zaets I., Chervatyuk N., de Vera J.-P., Danilchenko A.B. Foing B.H., zyrovska N. (2010) Space Sci. Technol. 3. Kozyrovska N.O., Vidmachenko A.P., Foing B.H. et al. Exploration/call/estec/ESA. 2009.

Marginal adaptation and CAD-CAM technology: A systematic review of restorative material and fabrication techniques.

Science.gov (United States)

Papadiochou, Sofia; Pissiotis, Argirios L

2018-04-01

The comparative assessment of computer-aided design and computer-aided manufacturing (CAD-CAM) technology and other fabrication techniques pertaining to marginal adaptation should be documented. Limited evidence exists on the effect of restorative material on the performance of a CAD-CAM system relative to marginal adaptation. The purpose of this systematic review was to investigate whether the marginal adaptation of CAD-CAM single crowns, fixed dental prostheses, and implant-retained fixed dental prostheses or their infrastructures differs from that obtained by other fabrication techniques using a similar restorative material and whether it depends on the type of restorative material. An electronic search of English-language literature published between January 1, 2000, and June 30, 2016, was conducted of the Medline/PubMed database. Of the 55 included comparative studies, 28 compared CAD-CAM technology with conventional fabrication techniques, 12 contrasted CAD-CAM technology and copy milling, 4 compared CAD-CAM milling with direct metal laser sintering (DMLS), and 22 investigated the performance of a CAD-CAM system regarding marginal adaptation in restorations/infrastructures produced with different restorative materials. Most of the CAD-CAM restorations/infrastructures were within the clinically acceptable marginal discrepancy (MD) range. The performance of a CAD-CAM system relative to marginal adaptation is influenced by the restorative material. Compared with CAD-CAM, most of the heat-pressed lithium disilicate crowns displayed equal or smaller MD values. Slip-casting crowns exhibited similar or better marginal accuracy than those fabricated with CAD-CAM. Cobalt-chromium and titanium implant infrastructures produced using a CAD-CAM system elicited smaller MD values than zirconia. The majority of cobalt-chromium restorations/infrastructures produced by DMLS displayed better marginal accuracy than those fabricated with the casting technique. Compared with copy

Gas exchange and leaf anatomy of a C3-CAM hybrid, Yucca gloriosa (Asparagaceae).

Science.gov (United States)

Heyduk, Karolina; Burrell, Nia; Lalani, Falak; Leebens-Mack, Jim

2016-03-01

While the majority of plants use the typical C3 carbon metabolic pathway, ~6% of angiosperms have adapted to carbon limitation as a result of water stress by employing a modified form of photosynthesis known as Crassulacean acid metabolism (CAM). CAM plants concentrate carbon in the cells by temporally separating atmospheric carbon acquisition from fixation into carbohydrates. CAM has been studied for decades, but the evolutionary progression from C3 to CAM remains obscure. In order to better understand the morphological and physiological characteristics associated with CAM photosynthesis, phenotypic variation was assessed in Yucca aloifolia, a CAM species, Yucca filamentosa, a C3 species, and Yucca gloriosa, a hybrid species derived from these two yuccas exhibiting intermediate C3-CAM characteristics. Gas exchange, titratable leaf acidity, and leaf anatomical traits of all three species were assayed in a common garden under well-watered and drought-stressed conditions. Yucca gloriosa showed intermediate phenotypes for nearly all traits measured, including the ability to acquire carbon at night. Using the variation found among individuals of all three species, correlations between traits were assessed to better understand how leaf anatomy and CAM physiology are related. Yucca gloriosa may be constrained by a number of traits which prevent it from using CAM to as high a degree as Y. aloifolia. The intermediate nature of Y. gloriosa makes it a promising system in which to study the evolution of CAM. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Perspectives of complementary and alternative medicine (CAM) practitioners in the support and treatment of infertility.

Science.gov (United States)

O'Reilly, Erin; Sevigny, Marika; Sabarre, Kelley-Anne; Phillips, Karen P

2014-10-14

Infertility patients are increasingly using complementary and alternative medicine (CAM) to supplement or replace conventional fertility treatments. The objective of this study was to determine the roles of CAM practitioners in the support and treatment of infertility. Ten semi-structured interviews were conducted in Ottawa, Canada in 2011 with CAM practitioners who specialized in naturopathy, acupuncture, traditional Chinese medicine, hypnotherapy and integrated medicine. CAM practitioners played an active role in both treatment and support of infertility, using a holistic, interdisciplinary and individualized approach. CAM practitioners recognized biological but also environmental and psychosomatic determinants of infertility. Participants were receptive to working with physicians, however little collaboration was described. Integrated infertility patient care through both collaboration with CAM practitioners and incorporation of CAM's holistic, individualized and interdisciplinary approaches would greatly benefit infertility patients.

The use of CAM and conventional treatments among primary care consulters with chronic musculoskeletal pain

Directory of Open Access Journals (Sweden)

Lewis Martyn

2007-05-01

Full Text Available Abstract Background Chronic musculoskeletal pain is the single most cited reason for use of complementary and alternative medicine (CAM. Primary care is the most frequent conventional medical service used by patients with pain in the UK. We are unaware, however, of a direct evidence of the extent of CAM use by primary care patients, and how successful they perceive it to be. Methods Aims and objectives To determine CAM use among patients with chronic musculoskeletal pain who have consulted about their pain in primary care. Study design Face-to-face interview-based survey. Setting Three general practices in North Staffordshire. Participants Respondents to a population pain survey who had reported having musculoskeletal pain in the survey and who had consulted about their pain in primary care in the previous 12 months as well as consenting to further research and agreeing to an interview. Information was gathered about their pain and the use of all treatments for pain, including CAM, in the previous year. Results 138 interviews were completed. 116 participants (84% had used at least one CAM treatment for pain in the previous year. 65% were current users of CAM. The ratio of over-the-counter CAM use to care from a CAM provider was 3:2. 111 participants (80% had used conventional treatment. 95 (69% were using a combination of CAM and conventional treatment. Glucosamine and fish oil were the most commonly used CAM treatments (38%, 35% respectively. Most CAM treatments were scored on average as being helpful, and users indicated that they intended to use again 87% of the CAM treatments they had already used. Conclusion We provide direct evidence that most primary care consulters with chronic musculoskeletal pain have used CAM in the previous year, usually in combination with conventional treatments. The high prevalence and wide range of users experiences of benefit and harm from CAM strengthen the argument for more research into this type of medicine

Research Paper: Impact of Air Seat Cushions and Ball Chairs on Classroom Behavior of Students with Autism Spectrum Disorder

Directory of Open Access Journals (Sweden)

Nader Matin Sadr

2016-07-01

Conclusion In the present study, therapy balls and or cushioned chairs for ASD students facilitated in-seat and on-task behaviors and improved classroom performance. It seems that using these alternative seating chairs can satisfy the subjects’ needs to sensory stimuli, and therefore, decreases their sensory seeking behaviors which interferes with their academic achievements. While, using therapy ball chairs for these students may facilitate in-seat behavior and decrease autistic behavior in class, the student’s response to dynamic seating is different individually. Therefore, chair selection must be based on vestibular reaction of the students.

The CUPCIG (CAM-Use in Primary Care in Germany) Study:Part I-Pain. Study Protocol of a Pilot-trial to Assess Feasibility, Acceptability and Perceived Effectiveness of CAM in Pain Disorders in Primary Care.

Science.gov (United States)

Schencking, Martin; Sönnichsen, Andreas; Bassüner, Susanne; Redaelli, Marcus

2015-01-01

There is limited valid data available on CAM procedures for chronic joint and neuropathic pain in primary care in Germany. Indiviual CAM qualifications of the general practitioners (GPs) and the potential of cost reduction through CAM treatment are almost unknown. The aim of this pilot trial preceding the main study is to examine the survey mode, to estimate the response rate by GPs with or without an additional qualification for CAM, and to identify the status quo in therapeutic approaches for chronic pain disorders in primary care. This is a cross-sectional study with an ex post facto design among German GPs consisting of 2 parts: In a first step, a pilot trial precedes the main study targeting 200 GPs with and 200 GPs without additional qualification in CAM in a selected region. The results of the CUPCIG study comprise the distribution of pain types treated in primary care practices, the GPs' attitude toward complementary pain therapy, pharmacological or CAM treatment, the estimate of cost reduction through CAM treatment of pain, the application of diverse CAM procedures, and biographical data. The CUPCIG study serves to compile pain therapy approaches in primary care in Germany with respect to the individual CAM expertise of the GPs. © 2015 S. Karger GmbH, Freiburg.

Introduction of effect and consideration of the introduction of CAD/CAM system

International Nuclear Information System (INIS)

Kang, Man Ok

1984-12-01

This reports introduction of effect and consideration of the introduction of computer-aided design and computer aided manufacturing system. It includes outline of CAD/CAM system like definition, classification, system kinds, and development process of CAD/CAM system, technology, market trend development prospect, and value on introduction of this system, and current application of CAD/CAM system in major application area, development countries and Korea.

An approach to biomimetics: the natural CAD/CAM restoration: a clinical report.

Science.gov (United States)

Schlichting, Luís Henrique; Schlichting, Kathryn Klemz; Stanley, Kyle; Magne, Michel; Magne, Pascal

2014-02-01

Those in the dental field have always pursued the perfect dental material for the treatment of compromised teeth. Gold, amalgam, composite resin, glass ionomer, and porcelain have been used. Tooth-like restorative materials (composite resin and porcelain) combined with an effective hard tissue bond have met the growing demand for esthetic or metal-free restorations in the past 15 to 20 years. However, none of those materials can fully mimic the unique properties of dentin (compliance and crack-stopping behavior) and enamel (wear resistance, function). The aim of this article is to report the restoration of an extensively damaged tooth with a natural restoration obtained by milling an extracted third molar tooth with a computer-aided design and computer-aided manufacturing (CAD/CAM) system. The main benefit of this novel technique is the replacement of lost tissues by actual enamel and dentin, with the potential to recover mechanical, esthetic, and biologic properties. The indication for extracting third molars and premolars because of impaction or for orthodontic reasons makes these posterior teeth readily available. The innovation of the method presented here is the optimal use of the extracted tooth substrate thanks to its positioning technique in the CAD/CAM milling chamber. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Child/Adolescent Anxiety Multimodal Study (CAMS: rationale, design, and methods

Directory of Open Access Journals (Sweden)

Waslick Bruce D

2010-01-01

Full Text Available Abstract Objective To present the design, methods, and rationale of the Child/Adolescent Anxiety Multimodal Study (CAMS, a recently completed federally-funded, multi-site, randomized placebo-controlled trial that examined the relative efficacy of cognitive-behavior therapy (CBT, sertraline (SRT, and their combination (COMB against pill placebo (PBO for the treatment of separation anxiety disorder (SAD, generalized anxiety disorder (GAD and social phobia (SoP in children and adolescents. Methods Following a brief review of the acute outcomes of the CAMS trial, as well as the psychosocial and pharmacologic treatment literature for pediatric anxiety disorders, the design and methods of the CAMS trial are described. Results CAMS was a six-year, six-site, randomized controlled trial. Four hundred eighty-eight (N = 488 children and adolescents (ages 7-17 years with DSM-IV-TR diagnoses of SAD, GAD, or SoP were randomly assigned to one of four treatment conditions: CBT, SRT, COMB, or PBO. Assessments of anxiety symptoms, safety, and functional outcomes, as well as putative mediators and moderators of treatment response were completed in a multi-measure, multi-informant fashion. Manual-based therapies, trained clinicians and independent evaluators were used to ensure treatment and assessment fidelity. A multi-layered administrative structure with representation from all sites facilitated cross-site coordination of the entire trial, study protocols and quality assurance. Conclusions CAMS offers a model for clinical trials methods applicable to psychosocial and psychopharmacological comparative treatment trials by using state-of-the-art methods and rigorous cross-site quality controls. CAMS also provided a large-scale examination of the relative and combined efficacy and safety of the best evidenced-based psychosocial (CBT and pharmacologic (SSRI treatments to date for the most commonly occurring pediatric anxiety disorders. Primary and secondary results

76 FR 2883 - Folding Metal Tables and Chairs From the People's Republic of China: Final Results of 2007-2008...

Science.gov (United States)

2011-01-18

... the chair component of Staples' ``Complete Office-To-Go,'' a folding chair with a tubular steel frame... steel seat frame with screws, and has cross-braces affixed to its legs. On May 1, 2006, the Department... folding tables and folding chairs made primarily or exclusively from steel or other metal, as described...

PhenoCam Dataset v1.0: Digital Camera Imagery from the PhenoCam Network, 2000-2015

Data.gov (United States)

National Aeronautics and Space Administration — This dataset provides a time series of visible-wavelength digital camera imagery collected through the PhenoCam Network at each of 133 sites in North America and...

Development of New Wheel-Chair for Sports Competition

Directory of Open Access Journals (Sweden)

Akira Shionoya

2018-03-01

Full Text Available The purpose of this study was to develop the new wheel-chair which had the function to drive straight by one-hand operation. To perform this purpose, the driving force transmission axis (DFTA which had transmitted the driving force from the one side of wheel to another side of that was developed. The wheel-chair could drive straight by one-hand operation by the DFTA. The large torque, however, was generated in the DFTA, because the DFTA transmitted the driving force from the one side of wheel to another side by the axis of small diameter. Furthermore, the shear stress in the DFTA generated by this torque would lead to the DFTA break. The shear stress in the DFTA was calculated to examine the axial strength and durability. On the DETA of the wheelchair, the maximum shear stress calculated from the torque in driving was 39.53 MP and this was defined as the standard of the demand specifications as a strength and durability of the DFTA.

Day/night regulation of aquaporins during the CAM cycle in Mesembryanthemum crystallinum.

Science.gov (United States)

Vera-Estrella, Rosario; Barkla, Bronwyn J; Amezcua-Romero, Julio C; Pantoja, Omar

2012-03-01

Mesembryanthemum crystallinum exhibits induction of Crassulacean acid metabolism (CAM) after a threshold stage of development, by exposure to long days with high light intensities or by water and salt stress. During the CAM cycle, fluctuations in carbon partitioning within the cell lead to transient drops in osmotic potential, which are likely stabilized/balanced by passive movement of water via aquaporins (AQPs). Protoplast swelling assays were used to detect changes in water permeability during the day/night cycle of CAM. To assess the role of AQPs during the same period, we followed transcript accumulation and protein abundance of four plasma membrane intrinsic proteins (PIPs) and one tonoplast intrinsic protein (TIP). CAM plants showed a persistent rhythm of specific AQP protein abundance changes throughout the day/night cycle, including changes in amount of McPIP2;1, McTIP1;2, McPIP1;4 and McPIP1;5, while the abundance of McPIP1;2 was unchanged. These protein changes did not appear to be coordinated with transcript levels for any of the AQPs analysed; however, they did occur in parrallel to alterations in water permeability, as well as variations in cell osmolarity, pinitol, glucose, fructose and phosphoenolpyruvate carboxylase (PEPc) levels measured throughout the day/night CAM cycle. Results suggest a role for AQPs in maintaining water balance during CAM and highlight the complexity of protein expression during the CAM cycle. © 2011 Blackwell Publishing Ltd.

A methodological framework for evaluating the evidence for Complementary and Alternative Medicine (CAM) for cancer

DEFF Research Database (Denmark)

Zachariae, Robert; Johannesen, Helle

2011-01-01

In spite of lacking evidence for effects on cancer progression itself, an increasing number of cancer patients use various types of complementary and alternative medicine (CAM). There is disagreement between CAM practitioners, researchers and clinical oncologists, as to how evidence concerning...... effects of CAM can and should be produced, and how the existing evidence should be interpreted. This represents a considerable challenge for oncologists; both in terms of patient needs for an informed dialogue regarding CAM, and because some types of CAM may interact with standard treatments....... There is a need for insight into which kinds of CAM may work, for whom they work, what the possible effects and side-effects are, and in what ways such effects may come about. The present article presents a framework for evaluating effects of CAM by suggesting a taxonomy of different levels of evidence related...

Phenotype-dependent effects of EpCAM expression on growth and invasion of human breast cancer cell lines

International Nuclear Information System (INIS)

Martowicz, Agnieszka; Spizzo, Gilbert; Gastl, Guenther; Untergasser, Gerold

2012-01-01

The epithelial cell adhesion molecule (EpCAM) has been shown to be overexpressed in breast cancer and stem cells and has emerged as an attractive target for immunotherapy of breast cancer patients. This study analyzes the effects of EpCAM on breast cancer cell lines with epithelial or mesenchymal phenotype. For this purpose, shRNA-mediated knockdown of EpCAM gene expression was performed in EpCAM high breast cancer cell lines with epithelial phenotype (MCF-7, T47D and SkBR3). Moreover, EpCAM low breast carcinoma cell lines with mesenchymal phenotype (MDA-MB-231, Hs578t) and inducible overexpression of EpCAM were used to study effects on proliferation, migration and in vivo growth. In comparison to non-specific silencing controls (n/s-crtl) knockdown of EpCAM (E#2) in EpCAM high cell lines resulted in reduced cell proliferation under serum-reduced culture conditions. Moreover, DNA synthesis under 3D culture conditions in collagen was significantly reduced. Xenografts of MCF-7 and T47D cells with knockdown of EpCAM formed smaller tumors that were less invasive. EpCAM low cell lines with tetracycline-inducible overexpression of EpCAM showed no increased cell proliferation or migration under serum-reduced growth conditions. MDA-MB-231 xenografts with EpCAM overexpression showed reduced invasion into host tissue and more infiltrates of chicken granulocytes. The role of EpCAM in breast cancer strongly depends on the epithelial or mesenchymal phenotype of tumor cells. Cancer cells with epithelial phenotype need EpCAM as a growth- and invasion-promoting factor, whereas tumor cells with a mesenchymal phenotype are independent of EpCAM in invasion processes and tumor progression. These findings might have clinical implications for EpCAM-based targeting strategies in patients with invasive breast cancer

Longevity of Single-Tooth All-Ceramic CAD/CAM Restorations: A Meta-Analysis

Science.gov (United States)

2013-07-01

to the application of CAD/CAM technology in dentistry . The initial monetary investment for the equipment is significant. Systems currently on the...CURRENT DENTAL CAD/CAM SYSTEMS Current CAD/CAM systems in dentistry include: CEREC (CEramic REConstruction) and CEREC Acquisition Center (AC) with...of Adhesive Dentistry , 1 (3), 255- 265. 42     Bindl A, & Mörmann W. (2002). An up to 5-year clinical evaluation of posterior In- Ceram CAD

Benchmarking Academic Anatomic Pathologists: The Association of Pathology Chairs Survey.

Science.gov (United States)

Ducatman, Barbara S; Parslow, Tristram

2016-01-01

The most common benchmarks for faculty productivity are derived from Medical Group Management Association (MGMA) or Vizient-AAMC Faculty Practice Solutions Center ® (FPSC) databases. The Association of Pathology Chairs has also collected similar survey data for several years. We examined the Association of Pathology Chairs annual faculty productivity data and compared it with MGMA and FPSC data to understand the value, inherent flaws, and limitations of benchmarking data. We hypothesized that the variability in calculated faculty productivity is due to the type of practice model and clinical effort allocation. Data from the Association of Pathology Chairs survey on 629 surgical pathologists and/or anatomic pathologists from 51 programs were analyzed. From review of service assignments, we were able to assign each pathologist to a specific practice model: general anatomic pathologists/surgical pathologists, 1 or more subspecialties, or a hybrid of the 2 models. There were statistically significant differences among academic ranks and practice types. When we analyzed our data using each organization's methods, the median results for the anatomic pathologists/surgical pathologists general practice model compared to MGMA and FPSC results for anatomic and/or surgical pathology were quite close. Both MGMA and FPSC data exclude a significant proportion of academic pathologists with clinical duties. We used the more inclusive FPSC definition of clinical "full-time faculty" (0.60 clinical full-time equivalent and above). The correlation between clinical full-time equivalent effort allocation, annual days on service, and annual work relative value unit productivity was poor. This study demonstrates that effort allocations are variable across academic departments of pathology and do not correlate well with either work relative value unit effort or reported days on service. Although the Association of Pathology Chairs-reported median work relative value unit productivity

Middle cerebral artery blood flow velocity during beach chair position for shoulder surgery under general anesthesia.

Science.gov (United States)

Hanouz, Jean-Luc; Fiant, Anne-Lise; Gérard, Jean-Louis

2016-09-01

The goal of the present study was to examine changes of middle cerebral artery (VMCA) blood flow velocity in patients scheduled for shoulder surgery in beach chair position. Prospective observational study. Operating room, shoulder surgery. Fifty-three consecutive patients scheduled for shoulder surgery in beach chair position. Transcranial Doppler performed after induction of general anesthesia (baseline), after beach chair positioning (BC1), during surgery 20minutes (BC2), and after back to supine position before stopping anesthesia (supine). Mean arterial pressure (MAP), end-tidal CO2, and volatile anesthetic concentration and VMCA were recorded at baseline, BC1, BC2, and supine. Postoperative neurologic complications were searched. Beach chair position induced decrease in MAP (baseline: 73±10mm Hg vs lower MAP recorded: 61±10mm Hg; P<.0001) requiring vasopressors and fluid challenge in 44 patients (83%). There was a significant decrease in VMCA after beach chair positioning (BC1: 33±10cm/s vs baseline: 39±14cm/s; P=.001). The VMCA at baseline (39±2cm/s), BC2 (35±14cm/s), and supine (39±14cm/s) were not different. The minimal alveolar concentration of volatile anesthetics, end-tidal CO2, SpO2, and MAP were not different at baseline, BC1, BC2, and supine. Beach chair position resulted in transient decrease in MAP requiring fluid challenge and vasopressors and a moderate decrease in VMCA. Copyright © 2016 Elsevier Inc. All rights reserved.

7 CFR 1900.6 - Chair, Loan Resolution Task Force.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Chair, Loan Resolution Task Force. 1900.6 Section 1900.6 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY, DEPARTMENT OF...

Availability Analysis of the Ventilation Stack CAM Interlock System

CERN Document Server

Young, J

2000-01-01

Ventilation Stack Continuous Air Monitor (CAM) Interlock System failure modes, failure frequencies, and system availability have been evaluated for the RPP. The evaluation concludes that CAM availability is as high as assumed in the safety analysis and that the current routine system surveillance is adequate to maintain this availability credited in the safety analysis, nor is such an arrangement predicted to significantly improve system availability.

A Theoretical Model for Designing an In-House Community College Department Chair Professional Development Program

Science.gov (United States)

Sirkis, Jocelyn Eager

2013-01-01

Academic department chairs serve as front-line managers and leaders who perform a wide variety of tasks. These tasks may include mundane chores, such as ordering office supplies, or important ones, such as changing the department culture to one that embraces assessment. Too often, however, individuals take on the chair position with little to no…

Minister Pratt welcomes new Canada Research Chair at Carleton University

CERN Multimedia

2004-01-01

"The Honourable David Pratt, Minister of National Defence, and Member of Parliament for Nepean-Carleton, today congratulated Carleton University on receiving $638,405 in funding to support a new Canada Research Chair" (1 page)

Comparison of Flexural Strength of Different CAD/CAM PMMA-Based Polymers.

Science.gov (United States)

Alp, Gülce; Murat, Sema; Yilmaz, Burak

2018-01-28

To compare the flexural strength of different computer-aided design/computer-aided manufacturing (CAD/CAM) poly(methyl methacrylate)-based (PMMA) polymers and conventional interim resin materials after thermocycling. Rectangular-shaped specimens (n = 15, for each material) (25 × 2 × 2 mm 3 ) were fabricated from 3 CAD/CAM PMMA-based polymers (Telio CAD [T]; M-PM-Disc [M]; Polident-PMMA [P]), 1 bis-acrylate composite resin (Protemp 4 [PT]), and 1 conventional PMMA (ArtConcept Artegral Dentine [C]) according to ISO 10477:2004 Standards (Dentistry-Polymer-Based Crown and Bridge Materials). The specimens were subjected to 10,000 thermocycles (5 to 55°C). Three-point flexural strength of the specimens was tested in a universal testing machine at a 1.0 mm/min crosshead speed, and the flexural strength data (σ) were calculated (MPa). The flexural strength values were statistically analyzed using 1-way ANOVA, and Tukey HSD post-hoc test for multiple comparisons (α = 0.05). Flexural strength values ranged between 66.1 ± 13.1 and 131.9 ± 19.8 MPa. There were significant differences among the flexural strengths of tested materials, except for between T and P CAD/CAM PMMA-based polymers (p > 0.05). CAD/CAM PMMA-based polymer M had the highest flexural strength and conventional PMMA had the lowest (p CAD/CAM PMMA-based T and P polymers had significantly higher flexural strength than the bis-acrylate composite resin (p CAD/CAM PMMA-based M (p CAD/CAM PMMA-based polymers was greater than the flexural strength of bis-acrylate composite resin, which had a greater flexural strength compared to conventional PMMA resin. © 2018 by the American College of Prosthodontists.

Do CAD/CAM dentures really release less monomer than conventional dentures?

Science.gov (United States)

Steinmassl, Patricia-Anca; Wiedemair, Verena; Huck, Christian; Klaunzer, Florian; Steinmassl, Otto; Grunert, Ingrid; Dumfahrt, Herbert

2017-06-01

Computer-aided design (CAD)/computer-aided manufacturing (CAM) dentures are assumed to have more favourable material properties than conventionally fabricated dentures, among them a lower methacrylate monomer release. The aim of this study was to test this hypothesis. CAD/CAM dentures were generated from ten different master casts by using four different CAD/CAM systems. Conventional, heat-polymerised dentures served as control group. Denture weight and volume were measured; the density was calculated, and the denture surface area was assessed digitally. The monomer release after 7 days of water storage was measured by high-performance liquid chromatography. Whole You Nexteeth and Wieland Digital Dentures had significantly lower mean volume and weight than conventional dentures. Baltic Denture System and Whole You Nexteeth had a significantly increased density. Baltic Denture System had a significantly smaller surface area. None of the CAD/CAM dentures released significantly less monomer than the control group. All tested dentures released very low amounts of methacrylate monomer, but not significantly less than conventional dentures. A statistically significant difference might nevertheless exist in comparison to other, less recommendable denture base materials, such as the frequently used autopolymerising resins. CAD/CAM denture fabrication has numerous advantages. It enables the fabrication of dentures with lower resin volume and lower denture weight. Both could increase the patient comfort. Dentures with higher density might exhibit more favourable mechanical properties. The hypothesis that CAD/CAM dentures release less monomer than conventional dentures could, however, not be verified.

Utilizing Chair Massage to Address One Woman’s Health in Rural Ghana West Africa: a Case Report

Science.gov (United States)

Meryanos, Cathy J.

2016-01-01

Background and Objectives There is limited access to health care in rural Ghana and virtually no rehabilitative services available. This situation presents a unique opportunity to utilize chair massage in addressing women’s health in rural Ghana, particularly when it comes to muscle pain and fatigue from heavy labor. The objective of this case report is to determine the results of chair massage as a strategy to reduce neck, shoulder, and back pain, while increasing range of motion. Case Presentation The patient is a 63-year-old Ghanaian female, who was struck by a public transport van while carrying a 30–50 pound load on her head, two years prior. The accident resulted in a broken right humerus and soft tissue pain. A traditional medicine practitioner set the bone, however there was no post-accident rehabilitation available. At the time of referral, she presented complaints of shoulder, elbow, and wrist pain. In addition, she was unable to raise her right hand to her mouth for food intake. Results The results of this case report include an increase in range of motion, as well as elimination of pain in the right shoulder, elbow, and hand. Visual assessments showed an approximate increase of ROM within the ranges of 45–65 degrees in the right arm, as well as 10–15 degrees in 4th and 5th fingers. There was also a decrease in muscle hypertonicity in the thoracic and cervical areas, and a profound increase in quality of life for the patient. Discussion This case report illustrates how therapeutic chair massage was utilized to address a common health concern for one woman in rural Ghana. It also demonstrates that pre-existing musculoskeletal disorders and pain may be eliminated with massage intervention. Massage therapy may be important to ameliorating certain types of health problems in remote rural villages in low income countries. PMID:27974948

Fearing Colleges Slight "Traditional Values," Conservatives Back "Free Enterprise" Chairs.

Science.gov (United States)

Evangelauf, Jean

1987-01-01

In the last 25 years, 80 to 100 chairs or institutes focusing on the study of capitalism have been established on college campuses, sometimes facing criticism because of potential conflict with the institution's mission. (MSE)

Sobre figuras de oposição em dois sonetos de Camões

OpenAIRE

Marnoto, Rita

2012-01-01

(2012). Sobre figuras de oposição em dois sonetos de Camões. In Rita Marnoto (Coord.), Comentário a Camões. Vol. 1. Sonetos (147-204). Lisboa: CIEC, Cotovia. ISBN 978 972 795 330 1 figuras de oposição, visão histórica e seu uso em dois sonetos de Camões

Cam-Follower Mechanism Design for Narrow Loom Beat Up Motion ...

African Journals Online (AJOL)

The topology of the kinematics is developed by using the graph theory method of kinematic synthesis. The forces required to drive the plate-cam and follower system were modeled and the components such as the plate-cam, camshaft, the follower and the drive mechanism were synthesized for smooth operation of the ...

Understanding dental CAD/CAM for restorations--the digital workflow from a mechanical engineering viewpoint.

Science.gov (United States)

Tapie, L; Lebon, N; Mawussi, B; Fron Chabouis, H; Duret, F; Attal, J-P

2015-01-01

As digital technology infiltrates every area of daily life, including the field of medicine, so it is increasingly being introduced into dental practice. Apart from chairside practice, computer-aided design/computer-aided manufacturing (CAD/CAM) solutions are available for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental solutions can be considered a chain of digital devices and software for the almost automatic design and creation of dental restorations. However, dentists who want to use the technology often do not have the time or knowledge to understand it. A basic knowledge of the CAD/CAM digital workflow for dental restorations can help dentists to grasp the technology and purchase a CAM/CAM system that meets the needs of their office. This article provides a computer-science and mechanical-engineering approach to the CAD/CAM digital workflow to help dentists understand the technology.

CAM therapies among primary care patients using opioid therapy for chronic pain

OpenAIRE

Fleming, Sara; Rabago, David P; Mundt, Marlon P; Fleming, Michael F

2007-01-01

Abstract Background Complementary and alternative medicine (CAM) is an increasingly common therapy used to treat chronic pain syndromes. However; there is limited information on the utilization and efficacy of CAM therapy in primary care patients receiving long-term opioid therapy. Method A survey of CAM therapy was conducted with a systematic sample of 908 primary care patients receiving opioids as a primary treatment method for chronic pain. Subjects completed a questionnaire designed to as...

Gender, Performativity, and Leadership: Department Chairs in Research Universities

Science.gov (United States)

Lepkowski, Christine

2014-01-01

Women are significantly underrepresented as administrators in higher education leadership. This qualitative study examined the leadership of department chairs at public research universities to better understand how their gender and other identities affected their leadership. The following research questions shaped the study: (1) How do department…

Treatment expectations for CAM interventions in pediatric chronic pain patients and their parents.

Science.gov (United States)

Tsao, Jennie C I; Meldrum, Marcia; Bursch, Brenda; Jacob, Margaret C; Kim, Su C; Zeltzer, Lonnie K

2005-12-01

Patient expectations regarding complementary and alternative medicine (CAM) interventions have important implications for treatment adherence, attrition and clinical outcome. Little is known, however, about parent and child treatment expectations regarding CAM approaches for pediatric chronic pain problems. The present study examined ratings of the expected benefits of CAM (i.e. hypnosis, massage, acupuncture, yoga and relaxation) and conventional medicine (i.e. medications, surgery) interventions in 45 children (32 girls; mean age = 13.8 years +/- 2.5) and parents (39 mothers) presenting for treatment at a specialty clinic for chronic pediatric pain. Among children, medications and relaxation were expected to be significantly more helpful than the remaining approaches (P CAM to be fairly low with parents' expectations only somewhat more positive. The current findings suggest that educational efforts directed at enhancing treatment expectations regarding CAM, particularly among children with chronic pain, are warranted.

Luís de Camões - O Lírico

Directory of Open Access Journals (Sweden)

Sigismundo Spina

1953-03-01

Full Text Available CIDADE (Hernani. - Luís de Camões - O Lírico . Livraria Bertrand, Lisboa, 1952. 354 pp. (Primeiro Parágrafo do Artigo Os estudos da obra lírica de Camões levados a efeito pela erudição de Hernani Cidade datam de quase 20 anos, quando em 1936, na "Revista da Faculdade de Lisboa", escreveu "LUIS DE CAMÕES" - o Lírico.

The role of complementary and alternative medicine (CAM in Germany – A focus group study of GPs

Directory of Open Access Journals (Sweden)

Rosemann Thomas

2008-06-01

Full Text Available Abstract Background There has been a marked increase in the use of complementary and alternative medicine (CAM in recent years worldwide. In Germany, apart from 'Heilpraktiker' (= state-licensed, non-medical CAM practitioners, some general practitioners (GPs provide CAM in their practices. This paper aims to explore the attitudes of GPs about the role of CAM in Germany, in relation to the healthcare system, quality of care, medical education and research. Furthermore, experiences of GPs integrating CAM in their daily practice were explored. Methods Using a qualitative methodological approach 3 focus groups with a convenience sample of 17 GPs were conducted. The discussions were transcribed verbatim and analysed using qualitative content analysis. Results The majority of the participating GPs had integrated one or more CAM therapies into their every-day practice. Four key themes were identified based on the topics covered in the focus groups: the role of CAM within the German healthcare system, quality of care, education and research. Within the theme 'role of CAM within the healthcare system' there were five categories: integration of CAM, CAM in the Statutory Health Insurance, modernisation of the Statutory Health Insurance Act, individual healthcare services and 'Heilpraktiker'. Regarding quality of care there were two broad groups of GPs: those who thought patients would benefit from standardizing CAM and those who feared that quality control would interfere with the individual approach of CAM. The main issues identified relating to research and education were the need for the development of alternative research strategies and the low quality of existing CAM education respectively. Conclusion The majority of the participating GPs considered CAM as a reasonable complementary approach within primary care. The study increased our understanding of GPs attitudes about the role of CAM within the German healthcare system and the use of

76 FR 16379 - Foreign-Trade Zone 177-Evansville, IN; Application for Manufacturing Authority, Best Chair, Inc...

Science.gov (United States)

2011-03-23

...--Evansville, IN; Application for Manufacturing Authority, Best Chair, Inc. d/b/a Best Home Furnishings... Zones Board (the Board) by the Ports of Indiana, grantee of FTZ 177, requesting manufacturing authority on behalf of Best Chair, Inc. d/b/a Best Home Furnishings (Best Home), to manufacture upholstered...

CAD/CAM-assisted breast reconstruction

International Nuclear Information System (INIS)

Melchels, Ferry; Hutmacher, Dietmar Werner; Wiggenhauser, Paul Severin; Schantz, Jan-Thorsten; Warne, David; Barry, Mark; Ong, Fook Rhu; Chong, Woon Shin

2011-01-01

The application of computer-aided design and manufacturing (CAD/CAM) techniques in the clinic is growing slowly but steadily. The ability to build patient-specific models based on medical imaging data offers major potential. In this work we report on the feasibility of employing laser scanning with CAD/CAM techniques to aid in breast reconstruction. A patient was imaged with laser scanning, an economical and facile method for creating an accurate digital representation of the breasts and surrounding tissues. The obtained model was used to fabricate a customized mould that was employed as an intra-operative aid for the surgeon performing autologous tissue reconstruction of the breast removed due to cancer. Furthermore, a solid breast model was derived from the imaged data and digitally processed for the fabrication of customized scaffolds for breast tissue engineering. To this end, a novel generic algorithm for creating porosity within a solid model was developed, using a finite element model as intermediate.

Cam Femoroacetabular Impingement as a Possible Explanation of Recalcitrant Anterior Knee Pain.

Science.gov (United States)

Sanchis-Alfonso, Vicente; Tey, Marc; Monllau, Joan Carles

2016-01-01

We present a case of a patient with chronic anterior knee pain (AKP) recalcitrant to conservative treatment who returned to our office for severe hip pain secondary to Cam femoroacetabular impingement (Cam FAI) at 10 months after the onset of knee pain. This case highlights the fact that the main problem is not in the patella but in the hip in some patients with AKP. We hypothesize that there is an external femoral rotation in order to avoid the impingement and therefore the hip pain in patients with Cam FAI. This functional femoral rotation could provoke a patellofemoral imbalance that may be, in theory, responsible for patellofemoral pain in this particular patient. In our case, Cam FAI resolution was related to the resolution of AKP.

Epigenetic regulation of L1CAM in endometrial carcinoma: comparison to cancer–testis (CT-X) antigens

International Nuclear Information System (INIS)

Schirmer, Uwe; Fiegl, Heidi; Pfeifer, Marco; Zeimet, Alain G; Müller-Holzner, Elisabeth; Bode, Peter K; Tischler, Verena; Altevogt, Peter

2013-01-01

L1CAM was originally identified as an adhesion molecule involved in neural development. In many human carcinomas L1CAM is over-expressed and is associated with a bad prognosis. We previously reported that L1CAM was absent in the vast majority of endometrioid endometrial carcinomas (ECs) (type 1) but was strongly expressed in the more aggressive serous and clear-cell ECs (termed type 2). The differential regulation of L1CAM in ECs is not well understood. Recent evidence suggests that it can be regulated by epigenetic mechanisms. Here we investigated the role of DNA-methylation of the L1CAM promoter for expression. We also studied the relationship to cancer testis (CT-X) antigens that co-localize with L1CAM on chromosome Xq28, a region that is often activated in human tumors. We used EC cell lines and primary tumor tissues for our analysis. For expression analysis we employed RT-PCR and Western blotting. DNA-Methylation of the L1CAM promoter was determined after bisulfite conversation and DNA sequencing. Tumor tissues were examined by immunohistochemical (IHC) staining. We demonstrate that the treatment of L1CAM low/negative expressing EC cell lines with 5 ′ -Azacytidine (5-AzaC) or knock-down of DNMT1 (DNA methyltransferase 1) as well as the HDAC (histone deacetylase) inhibitor Trichostatin A (TSA) up-regulated L1CAM at the mRNA and protein level. The L1CAM gene has two promoter regions with two distinct CpG islands. We observed that the expression of L1CAM correlated with hypermethylation in promoter 1 and 5-AzaC treatment affected the DNA-methylation pattern in this region. The CT-X antigens NY-ESO-1, MAGE-A3 and MAGE-A4 were also strongly up-regulated by 5-AzaC or knock-down of DNMT1 but did not respond to treatment with TSA. Primary EC tumor tissues showed a variable methylation pattern of the L1CAM promoter. No striking differences in promoter methylation were observed between tumor areas with L1CAM expression and those without expression. L1CAM expression

Complementing a Rural Pharmacy Course with CAM: Reflections from a Decade of Experience

Directory of Open Access Journals (Sweden)

Maree Simpson

2014-03-01

Full Text Available Substantial complementary medicines (CAM use is reported worldwide. Australian consumers use CAM for health maintenance, minor self-limiting disease states, and also for chronic conditions. The increasing use of CAM has required pharmacists to become increasingly more knowledgeable about CAM and the ethics of CAM recommendation. When the first Australian non-metropolitan pharmacy program was started at Charles Sturt University, in 1997, it was decided to incorporate two innovative courses to assist rurally educated students to engage with health consumers who expect pharmacists to be able to assist them with CAM. This discussion traces and reflects on the development, implementation and current situation of the Complementary Medicines for Pharmacy course. Over time, this course has evolved from a final year elective with a focus on familiarization to a mandated course with a phytomedicine focus to an integrated topic in final year with a focus on evidence, quality of evidence and professional decision-making demonstrated in a reflective professional portfolio. Of potentially greater importance, however, has been the introduction of complementary medicines as a topic in every year of the course with the goal of facilitating effective professional engagement with health consumers.

Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites.

Science.gov (United States)

Stawarczyk, Bogna; Liebermann, Anja; Eichberger, Marlis; Güth, Jan-Frederik

2015-03-01

To determine the mechanical and optical properties of CAD/CAM composites (LAVA Ultimate, Cerasmart, Shofu Block and two exp. CAD/CAM composites), a hybrid material (VITA Enamic), a leucite (IPS Empress CAD) and a lithium disilicate glass-ceramic (IPS e.max CAD). Three-point flexural strength (FS) was investigated according ISO 6872:2008 (N=240/n=30). Two-body wear (TBW) was analyzed in a chewing simulator (1,200,000 cycles, 50N, 5°/55°C) using human teeth as antagonists (N=120/n=15). Quantitative analysis of wear was carried out with a 3D-scanner and associated matching software. Discoloration rate (DR) after 14 days of storage in cress, curry, red wine, and distilled water (N=384/n=12), and translucency (T) (N=384/n=48) of CAD/CAM materials were measured in a spectrophotometer (400-700nm wavelength). Data were analyzed using two-/one-way ANOVA with Scheffé post-hoc test, Kruskal-Wallis-H test, and linear mixed models (α=0.05). IPS e.max CAD showed the highest FS (pCAD/CAM composites (exception: Shofu Block). The lowest FS showed VITA Enamic and IPS Empress CAD (pCAD, VITA Enamic, exp. CAD/CAM composite 2, followed by IPS e.max presented lower material TBW than the remaining CAD/CAM materials (pcurry>cress>distilled water) exerted the highest influence on DR (pCAD/CAM material. Glass-ceramics showed lower DR than CAD/CAM composites (pCAD/CAM composites presented moderate FS, high T and antagonist friendly behavior. Glass-ceramic demonstrated the most favorable DR and lowest TBW on the material side. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Pleiotropic Role of L1CAM in Tumor Vasculature

Directory of Open Access Journals (Sweden)

Francesca Angiolini

2017-01-01

Full Text Available Angiogenesis, the formation of new vessels, is a key step in the development, invasion, and dissemination of solid tumors and, therefore, represents a viable target in the context of antitumor therapy. Indeed, antiangiogenic approaches have given promising results in preclinical models and entered the clinical practice. However, in patients, the results obtained so far with antiangiogenic drugs have not completely fulfilled expectations, especially because their effect has been transient with tumors developing resistance and evasion mechanisms. A better understanding of the mechanisms that underlie tumor vascularization and the functional regulation of cancer vessels is a prerequisite for the development of novel and alternative antiangiogenic treatments. The L1 cell adhesion molecule (L1CAM, a cell surface glycoprotein previously implicated in the development and plasticity of the nervous system, is aberrantly expressed in the vasculature of various cancer types. L1CAM plays multiple pro-angiogenic roles in the endothelial cells of tumor-associated vessels, thus emerging as a potential therapeutic target. In addition, L1CAM prevents the maturation of cancer vasculature and its inhibition promotes vessel normalization, a process that is thought to improve the therapeutic response of tumors to cytotoxic drugs. We here provide an overview on tumor angiogenesis and antiangiogenic therapies and summarize the current knowledge on the biological role of L1CAM in cancer vasculature. Finally, we highlight the clinical implications of targeting L1CAM as a novel antiangiogenic and vessel-normalizing approach.

EpCAM as multi-tumour target for near-infrared fluorescence guided surgery

International Nuclear Information System (INIS)

Driel, P. B. A. A. van; Boonstra, M. C.; Prevoo, H. A. J. M.; Giessen, M. van de; Snoeks, T. J. A.; Tummers, Q. R. J. G.; Keereweer, S.; Cordfunke, R. A.; Fish, A.; Eendenburg, J. D. H. van; Lelieveldt, B. P. F.; Dijkstra, J.; Velde, C. J. H. van de; Kuppen, P. J. K.; Vahrmeijer, A. L.; Löwik, C. W. G. M.; Sier, C. F. M.

2016-01-01

Evaluation of resection margins during cancer surgery can be challenging, often resulting in incomplete tumour removal. Fluorescence-guided surgery (FGS) aims to aid the surgeon to visualize tumours and resection margins during surgery. FGS relies on a clinically applicable imaging system in combination with a specific tumour-targeting contrast agent. In this study EpCAM (epithelial cell adhesion molecule) is evaluated as target for FGS in combination with the novel Artemis imaging system. The NIR fluorophore IRDye800CW was conjugated to the well-established EpCAM specific monoclonal antibody 323/A3 and an isotype IgG1 as control. The anti-EpCAM/800CW conjugate was stable in serum and showed preserved binding capacity as evaluated on EpCAM positive and negative cell lines, using flow cytometry and cell-based plate assays. Four clinically relevant orthotopic tumour models, i.e. colorectal cancer, breast cancer, head and neck cancer, and peritonitis carcinomatosa, were used to evaluate the performance of the anti-EpCAM agent with the clinically validated Artemis imaging system. The Pearl Impulse small animal imaging system was used as reference. The specificity of the NIRF signal was confirmed using bioluminescence imaging and green-fluorescent protein. All tumour types could clearly be delineated and resected 72 h after injection of the imaging agent. Using NIRF imaging millimetre sized tumour nodules were detected that were invisible for the naked eye. Fluorescence microscopy demonstrated the distribution and tumour specificity of the anti-EpCAM agent. This study shows the potential of an EpCAM specific NIR-fluorescent agent in combination with a clinically validated intraoperative imaging system to visualize various tumours during surgery

Disclosure of Complementary and Alternative Medicine to Conventional Medical Providers: Variation by Race/Ethnicity and Type of CAM

Science.gov (United States)

Chao, Maria T.; Wade, Christine; Kronenberg, Fredi

2009-01-01

Background Complementary and alternative medicine (CAM) is often used alongside conventional medical care, yet fewer than half of patients disclose CAM use to medical doctors. CAM disclosure is particularly low among racial/ethnic minorities, but reasons for differences, such as type of CAM used or quality of conventional healthcare, have not been explored. Objective We tested the hypotheses that disclosure of CAM use to medical doctors is higher for provider-based CAM and among non-Hispanic whites, and that access to and quality of conventional medical care account for racial/ethnic differences in CAM disclosure. Methods Bivariate and multiple variable analyses of the 2002 National Health Interview Survey and 2001 Health Care Quality Survey were performed. Results Disclosure of CAM use to medical providers was higher for provider-based than self-care CAM. Disclosure of any CAM was associated with access to and quality of conventional care and higher among non-Latino whites relative to minorities. Having a regular doctor and quality patient–provider relationship mitigated racial/ethnic differences in CAM disclosure. Conclusion Insufficient disclosure of CAM use to conventional providers, particularly for self-care practices and among minority populations, represents a serious challenge in medical encounter communications. Efforts to improve disclosure of CAM use should be aimed at improving consistency of care and patient–physician communication across racial/ethnic groups. PMID:19024232

Effects of competition on induction of crassulacean acid metabolism in a facultative CAM plant.

Science.gov (United States)

Yu, Kailiang; D'Odorico, Paolo; Li, Wei; He, Yongli

2017-06-01

Abiotic drivers of environmental stress have been found to induce CAM expression (nocturnal carboxylation) in facultative CAM species such as Mesembryanthemum crystallinum. The role played by biotic factors such as competition with non-CAM species in affecting CAM expression, however, remains largely understudied. This research investigated the effects of salt and water conditions on the competition between M. crystallinum and the C 3 grass Bromus mollis with which it is found to coexist in California's coastal grasslands. We also investigated the extent to which CAM expression in M. crystallinum was affected by the intensity of the competition with B. mollis. We found that M. crystallinum had a competitive advantage over B. mollis in drought and saline conditions, while B. mollis exerted strong competitive effects on M. crystallinum in access to light and soil nutrients in high water conditions. This strong competitive effect even outweighed the favorable effects of salt or water additions in increasing the biomass and productivity of M. crystallinum in mixture. Regardless of salt conditions, M. crystallinum did not switch to CAM photosynthesis in response to this strong competitive effect from B. mollis. Disturbance (i.e., grass cutting) reduced the competitive pressure by B. mollis and allowed for CAM expression in M. crystallinum when it was grown mixed with B. mollis. We suggest that moderate competition with other functional groups can enhance CAM expression in M. crystallinum, thereby affecting its plasticity and ability to cope with biological stress.

A radiolucent chair for sitting-posture radiographs in non-ambulatory children: use in biplanar digital slot-scanning

International Nuclear Information System (INIS)

Bouloussa, Houssam; Dubory, Arnaud; Bachy, Manon; Seiler, Catherine; Morel, Baptiste; Vialle, Raphael

2015-01-01

EOS imaging (EOS System; EOS imaging, Paris, France) enables fast 2-D/3-D imaging of children in standing load-bearing position. Non-ambulatory children with neuromuscular scoliosis need evaluation of their spinal balance while in a normal daily position. We designed a customized chair fitting the EOS patient-area dimensions to obtain images in natural sitting postures. The chair is a 360 rotating orthopaedic chair made of fully radiolucent polyethylene and equipped with an adjustable headrest and three-point belts. Out of 41 consecutive patients, 36 (88%, 95% confidence interval 74-96%) had successful imaging. In most patients with severe neuromuscular trunk deformities, the EOS system combined with our chair was useful for assessing preoperative trunk collapse, pelvic obliquity and postoperative corrections in all planes. This specific device changed our daily practice for the assessment of spinal deformities in non-ambulatory patients. (orig.)

A radiolucent chair for sitting-posture radiographs in non-ambulatory children: use in biplanar digital slot-scanning

Energy Technology Data Exchange (ETDEWEB)

Bouloussa, Houssam; Dubory, Arnaud; Bachy, Manon [Universite Pierre et Marie Curie-Paris 6, Armand Trousseau Hospital, Department of Pediatric Orthopaedics, Paris Cedex 12 (France); Seiler, Catherine [Groupe Lagarrigue, Clichy (France); Morel, Baptiste [Universite Pierre et Marie Curie-Paris 6, Armand Trousseau Hospital, Department of Pediatric Imaging, Paris (France); Vialle, Raphael [Universite Pierre et Marie Curie-Paris 6, Armand Trousseau Hospital, Department of Pediatric Orthopaedics, Paris Cedex 12 (France); Armand Trousseau Hospital, The MAMUTH Hospital-University Department for Innovative Therapies in Musculoskeletal Diseases, Paris (France)

2015-11-15

EOS imaging (EOS System; EOS imaging, Paris, France) enables fast 2-D/3-D imaging of children in standing load-bearing position. Non-ambulatory children with neuromuscular scoliosis need evaluation of their spinal balance while in a normal daily position. We designed a customized chair fitting the EOS patient-area dimensions to obtain images in natural sitting postures. The chair is a 360 rotating orthopaedic chair made of fully radiolucent polyethylene and equipped with an adjustable headrest and three-point belts. Out of 41 consecutive patients, 36 (88%, 95% confidence interval 74-96%) had successful imaging. In most patients with severe neuromuscular trunk deformities, the EOS system combined with our chair was useful for assessing preoperative trunk collapse, pelvic obliquity and postoperative corrections in all planes. This specific device changed our daily practice for the assessment of spinal deformities in non-ambulatory patients. (orig.)

Cam Femoroacetabular Impingement as a Possible Explanation of Recalcitrant Anterior Knee Pain

Directory of Open Access Journals (Sweden)

Vicente Sanchis-Alfonso

2016-01-01

Full Text Available We present a case of a patient with chronic anterior knee pain (AKP recalcitrant to conservative treatment who returned to our office for severe hip pain secondary to Cam femoroacetabular impingement (Cam FAI at 10 months after the onset of knee pain. This case highlights the fact that the main problem is not in the patella but in the hip in some patients with AKP. We hypothesize that there is an external femoral rotation in order to avoid the impingement and therefore the hip pain in patients with Cam FAI. This functional femoral rotation could provoke a patellofemoral imbalance that may be, in theory, responsible for patellofemoral pain in this particular patient. In our case, Cam FAI resolution was related to the resolution of AKP.

77 FR 55813 - Environmental Management Site-Specific Advisory Board Chairs

Science.gov (United States)

2012-09-11

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB) Chairs. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 18242 - Environmental Management Site-Specific Advisory Board Chairs

Science.gov (United States)

2012-03-27

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB) Chairs. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 20311 - Environmental Management Site-Specific Advisory Board Chairs

Science.gov (United States)

2013-04-04

...This notice announces a webinar of the Environmental Management Site-Specific Advisory Board (EM SSAB) Chairs. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this webinar be announced in the Federal Register.

78 FR 59012 - Environmental Management Site-Specific Advisory Board Chairs

Science.gov (United States)

2013-09-25

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB) Chairs. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

Astrocyte-specific disruption of SynCAM1 signaling results in ADHD-like behavioral manifestations.

Directory of Open Access Journals (Sweden)

Ursula S Sandau

Full Text Available SynCAM1 is an adhesion molecule involved in synaptic differentiation and organization. SynCAM1 is also expressed in astroglial cells where it mediates astrocyte-to astrocyte and glial-neuronal adhesive communication. In astrocytes, SynCAM1 is functionally linked to erbB4 receptors, which are involved in the control of both neuronal/glial development and mature neuronal and glial function. Here we report that mice carrying a dominant-negative form of SynCAM1 specifically targeted to astrocytes (termed GFAP-DNSynCAM1 mice exhibit disrupted diurnal locomotor activity with enhanced and more frequent episodes of activity than control littermates during the day (when the animals are normally sleeping accompanied by shorter periods of rest. GFAP-DNSynCAM1 mice also display high levels of basal activity in the dark period (the rodent's awake/active time that are attenuated by the psychostimulant D,L-amphetamine, and reduced anxiety levels in response to both avoidable and unavoidable provoking stimuli. These results indicate that disruption of SynCAM1-dependent astroglial function results in behavioral abnormalities similar to those described in animals model of attention-deficit hyperactive disorder (ADHD, and suggest a hitherto unappreciated contribution of glial cells to the pathophysiology of this disorder.

Mr Gary Nairn MP, Chair of the Standing Committee on Science and Innovation, Australia

CERN Multimedia

Maximilien Brice

2003-01-01

Photos 01,04,06,07: Mr Gary Nairn MP, Chair of the Standing Committee on Science and Innovation, Australia,visiting the silicon test laboratory, April 2003. Photos 02,03: From left to right: Mr Gary Nairn MP, Chair of the Standing Committee on Science and Innovation, Australia,visiting the silicon test laboratory with Prof. Steinar Stapnes, Physicist in the ATLAS experiment, April 2003. Photos 02,09: Mrs Kerrye Nairn, Australia,visiting the silicon test laboratory, April 2003

Musical Chairs: An Innovative Teaching and Learning Method

Science.gov (United States)

Kuo, Ya-Hui

2010-01-01

How teaching and learning takes place in classrooms can be easily seen by the way classrooms are set up: Students' desks and chairs are arranged in rolls while teachers' desks are up front. Yet, why must teachers be the ones who lecture, why can't it be students? Would it be better or worse when teachers are the receivers and the students are the…

Engineering task plan for rotary mode core sampling exhausters CAM high radiation interlock

International Nuclear Information System (INIS)

BOGER, R.M.

1999-01-01

The Rotary Mode Core Sampling (RMCS) system is primarily made up of the Rotary Mode Core Sample Trucks (RMCST) and the RMCS Exhausters. During RMCS operations an Exhauster is connected to a tank riser and withdraws gases from the tank dome vapor space at approximately 200 Standard Cubic Feet per Minute (SCFM). The gases are passed through two High Efficiency Particulate Air (HEPA) filters before passing out the exhaust stack to the atmosphere. A Continuous Air Monitor (CAM) monitors the exhaust gases in the exhaust stack for beta particle and gamma radiation. The CAM has a high radiation alarm output and a detector fail alarm output. The CAM alarms are currently connected to the data logger only. The CAM alarms require operator response per procedure LMHC 1998 but no automatic functions are initiated by the CAM alarms. Currently, there are three events that can cause an automatic shut down of the Exhauster. These are, Low Tank Pressure, Highnow Stack Flow and High HEPA Filter Differential Pressure (DP)

Comparison of EyeCam and anterior segment optical coherence tomography in detecting angle closure.

Science.gov (United States)

Baskaran, Mani; Aung, Tin; Friedman, David S; Tun, Tin A; Perera, Shamira A

2012-12-01

To compare the diagnostic performance of EyeCam (Clarity Medical Systems, Pleasanton, CA, USA) and anterior segment optical coherence tomography (ASOCT, Visante; Carl Zeiss Meditec, Dublin, CA, USA) in detecting angle closure, using gonioscopy as the reference standard. Ninety-eight phakic patients, recruited from a glaucoma clinic, underwent gonioscopy by a single examiner, and EyeCam and ASOCT imaging by another examiner. Another observer, masked to gonioscopy findings, graded EyeCam and ASOCT images. For both gonioscopy and EyeCam, a closed angle in a particular quadrant was defined if the posterior trabecular meshwork was not visible. For ASOCT, angle closure was defined by any contact between the iris and angle anterior to the scleral spur. An eye was diagnosed as having angle closure if ≥2 quadrants were closed. Agreement and area under the receiver operating characteristic curves (AUC) were evaluated. The majority of subjects were Chinese (69/98, 70.4%) with a mean age of 60.6 years. Angle closure was diagnosed in 39/98 (39.8%) eyes with gonioscopy, 40/98 (40.8%) with EyeCam and 56/97 (57.7%) with ASOCT. The agreement (kappa statistic) for angle closure diagnosis for gonioscopy versus EyeCam was 0.89; gonioscopy versus ASOCT and EyeCam versus ASOCT were both 0.56. The AUC for detecting eyes with gonioscopic angle closure with EyeCam was 0.978 (95% CI: 0.93-1.0) and 0.847 (95% CI: 0.76-0.92, p < 0.01) for ASOCT. The diagnostic performance of EyeCam was better than ASOCT in detecting angle closure when gonioscopic grading was used as the reference standard. The agreement between the two imaging modalities was moderate. © 2012 The Authors. Acta Ophthalmologica © 2012 Acta Ophthalmologica Scandinavica Foundation.

Three-Dimensional Digital Evaluation of the Fit of Endocrowns Fabricated from Different CAD/CAM Materials.

Science.gov (United States)

Zimmermann, Moritz; Valcanaia, Andre; Neiva, Gisele; Mehl, Albert; Fasbinder, Dennis

2018-03-06

A wide variety of CAD/CAM materials are available for single-tooth restorations. CAD/CAM material characteristics are different and may influence CAM fabrication accuracy. There is no study investigating the influence of different CAD/CAM materials on the final fit of the restoration. The aim of this study was to evaluate the fit of endocrowns fabricated from different CAD/CAM materials using a new 3D evaluation method with an intraoral scanning system. The null hypothesis was that there are no significant differences for the fitting accuracy of different CAD/CAM materials. Preparation for an endocrown was performed on a maxillary right first molar on a typodont, and restorations were fabricated with a chairside CAD/CAM system (CEREC Omnicam, MCXL). Three groups using three different CAD/CAM materials were established (each n = 10): zirconia-reinforced lithium silicate ceramic (Celtra Duo; CD), leucite-reinforced silicate ceramic (Empress CAD; EM), resin nanoceramic (Lava Ultimate; LU). A 3D digital measurement technique (OraCheck, Cyfex AG) using an intraoral scanner (CEREC Omnicam) was used to measure the difference in fit between the three materials for a master endocrown preparation. The preparation scan and the endocrown fit scan were matched with special difference analysis software OraCheck. Three areas were selected for fitting accuracy measurements: margin (MA), axial (AX), occlusal (OC). Statistical analysis was performed using 80% percentile, one-way ANOVA, and post-hoc Scheffé test. Significance level was set to p = 0.05. Results varied from best 88.9 ± 7.7 μm for marginal fit of resin nanoceramic restorations (LU_MA) to worst 182.3 ± 24.0 μm for occlusal fit of zirconia-reinforced lithium silicate restorations (CD_OC). Statistically significant differences were found both within and among the test groups. Group CD performed statistically significantly different from group LU for marginal fit (MA) and axial fit (AX) (p 0.05). Deviation pattern for

CAM and Post-Traumatic Stress Disorder

Directory of Open Access Journals (Sweden)

Alex Hankey

2007-01-01

Full Text Available In the form of the Transcendental Meditation program CAM offers a method of eliminating deep-rooted stress, the efficacy of which has been demonstrated in several related studies. Any discussion of CAM and post-traumatic stress disorder should include a study of its application to Vietnam War Veterans in which improvements were observed on all variables, and several participants were able to return to work after several years of being unable to hold a job. The intervention has been studied for its impact on brain and autonomic nervous system function. It has been found to be highly effective against other stress-related conditions such as hypertension, and to improve brain coherence—a measure of effective brain function. It should be considered a possible ‘new and improved mode of treatment’ for PTSD, and further studies of its application made.

Seasonal photosynthetic gas exchange and water-use efficiency in a constitutive CAM plant, the giant saguaro cactus (Carnegiea gigantea).

Science.gov (United States)

Bronson, Dustin R; English, Nathan B; Dettman, David L; Williams, David G

2011-11-01

Crassulacean acid metabolism (CAM) and the capacity to store large quantities of water are thought to confer high water use efficiency (WUE) and survival of succulent plants in warm desert environments. Yet the highly variable precipitation, temperature and humidity conditions in these environments likely have unique impacts on underlying processes regulating photosynthetic gas exchange and WUE, limiting our ability to predict growth and survival responses of desert CAM plants to climate change. We monitored net CO(2) assimilation (A(net)), stomatal conductance (g(s)), and transpiration (E) rates periodically over 2 years in a natural population of the giant columnar cactus Carnegiea gigantea (saguaro) near Tucson, Arizona USA to investigate environmental and physiological controls over carbon gain and water loss in this ecologically important plant. We hypothesized that seasonal changes in daily integrated water use efficiency (WUE(day)) in this constitutive CAM species would be driven largely by stomatal regulation of nighttime transpiration and CO(2) uptake responding to shifts in nighttime air temperature and humidity. The lowest WUE(day) occurred during time periods with extreme high and low air vapor pressure deficit (D(a)). The diurnal with the highest D(a) had low WUE(day) due to minimal net carbon gain across the 24 h period. Low WUE(day) was also observed under conditions of low D(a); however, it was due to significant transpiration losses. Gas exchange measurements on potted saguaro plants exposed to experimental changes in D(a) confirmed the relationship between D(a) and g(s). Our results suggest that climatic changes involving shifts in air temperature and humidity will have large impacts on the water and carbon economy of the giant saguaro and potentially other succulent CAM plants of warm desert environments.

78 FR 64208 - Environmental Management Site-Specific Advisory Board Chairs

Science.gov (United States)

2013-10-28

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB) Chairs. The Federal Advisory Committee Act (Pub. L. No. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

Solar wheel chair; Solar kurumaisu (iryokei no tachiba kara no kokoromi)

Energy Technology Data Exchange (ETDEWEB)

Okabe, K [Gunma Prefectural College of Health Sciences, Gunma (Japan)

1996-10-27

Physically handicapped people due to accidents for example have been increasing yearly in number with the increase of the aged, spread of cars, and change in the living environment. Therefore, participation in society by such people as called the weak is indispensable. Under the circumstances, as a means of their participation, a wheel chair as a moving aid was examined from the viewpoint of medical treatment and classified into three categories as follows: (1) for the use of the aged who are healthy but leg muscles are weak, (2) for the use of the invalid incapable of moving a part of the body and (3) for the use in sports by people who are disabled in the lower half of the body but healthy otherwise. In other words, prototypes were made for three kinds of solar wheel chair, for the aged, for the invalid and for sport use by the disabled, with a field test performed for each prototype. The wheel chairs were exhibited in the school, used in welfare facilities and driven by a disabled person who participated in 100km marathon. The users` opinions were favorable stating they were able to drive by themselves the new vehicle utilizing the clean energy and to move around by their own free will. 6 refs., 5 figs.

Camões e Garret: navegações do Restelo a Cascais

Directory of Open Access Journals (Sweden)

Paulo Motta Oliveira

1999-10-01

Full Text Available Esse ensaio pretende analisar a presença de Luís de Camões, em especialdo Camões épico, em algumas das principais obras de Almeida Garrett, mostrando que essa presença faz uma navegação que partindo de Restelo chega a Cascais.

Marginal and internal fit of nano-composite CAD/CAM restorations

Directory of Open Access Journals (Sweden)

So-Hyun Park

2016-02-01

Full Text Available Objectives The purpose of this study was to compare the marginal and internal fit of nano-composite CAD-CAM restorations. Materials and Methods A full veneer crown and an mesio-occluso-distal (MOD inlay cavity, which were prepared on extracted human molars, were used as templates of epoxy resin replicas. The prepared teeth were scanned and CAD-CAM restorations were milled using Lava Ultimate (LU and experimental nano-composite CAD/CAM blocks (EB under the same milling parameters. To assess the marginal and internal fit, the restorations were cemented to replicas and were embedded in an acrylic mold for sectioning at 0.5 mm intervals. The measured gap data were pooled according to the block types and measuring points for statistical analysis. Results Both the block type and measuring point significantly affected gap values, and their interaction was significant (p = 0.000. In crowns and inlays made from the two blocks, gap values were significantly larger in the occlusal area than in the axial area, while gap values in the marginal area were smallest (p < 0.001. Among the blocks, the restorations milled from EB had a significantly larger gap at all measuring points than those milled from LU (p = 0.000. Conclusions The marginal and internal gaps of the two nano-composite CAD/CAM blocks differed according to the measuring points. Among the internal area of the two nano-composite CAD/CAM restorations, occlusal gap data were significantly larger than axial gap data. The EB crowns and inlays had significantly larger gaps than LU restorations.

Toward creating family-friendly work environments in pediatrics: baseline data from pediatric department chairs and pediatric program directors.

Science.gov (United States)

McPhillips, Heather A; Burke, Ann E; Sheppard, Kate; Pallant, Adam; Stapleton, F Bruder; Stanton, Bonita

2007-03-01

The objective was to determine baseline characteristics of pediatric residency training programs and academic departments in regard to family-friendly work environments as outlined in the Report of the Task Force on Women in Pediatrics. We conducted Web-based anonymous surveys of 147 pediatric department chairs and 203 pediatric program directors. The chair's questionnaire asked about child care, lactation facilities, family leave policies, work-life balance, and tenure and promotion policies. The program director's questionnaire asked about family leave, parenting, work-life balance, and perceptions of "family-friendliness." The response rate was 52% for program directors and 51% for chairs. Nearly 60% of chairs reported some access to child care or provided assistance locating child care; however, in half of these departments, demand almost always exceeded supply. Lactation facilities were available to breastfeeding faculty in 74% of departments, although only 57% provided access to breast pumps. A total of 78% of chairs and 90% of program directors reported written maternity leave policies with slightly fewer reporting paternity leave policies. The majority (83%) of chairs reported availability of part-time employment, whereas only 27% of program directors offered part-time residency options. Most departments offered some flexibility in promotion and tenure. Although progress has been made, change still is needed in many areas in pediatric departments and training programs, including better accessibility to quality child care; improved lactation facilities for breastfeeding mothers; clear, written parental leave policies; and flexible work schedules to accommodate changing demands of family life.

CAM: A Collaborative Object Memory System

NARCIS (Netherlands)

Vyas, Dhaval; Nijholt, Antinus; Kröner, Alexander

2010-01-01

Physical design objects such as sketches, drawings, collages, storyboards and models play an important role in supporting communication and coordination in design studios. CAM (Cooperative Artefact Memory) is a mobile-tagging based messaging system that allows designers to collaboratively store

miR-21-3p is a positive regulator of L1CAM in several human carcinomas.

Science.gov (United States)

Doberstein, Kai; Bretz, Niko P; Schirmer, Uwe; Fiegl, Heidi; Blaheta, Roman; Breunig, Christian; Müller-Holzner, Elisabeth; Reimer, Dan; Zeimet, Alain G; Altevogt, Peter

2014-11-28

Expression of L1 cell adhesion molecule (L1CAM) occurs frequently in human cancers and is associated with poor prognosis in cancers such as ovarian, endometrial, breast, renal cell carcinoma and pancreatic ductal adenocarcinoma. L1CAM promotes cell motility, invasion, chemoresistance and metastasis formation. Elucidating genetic processes involved in the expression of L1CAM in cancers is of considerable importance. Transcription factors such as SLUG, β-catenin/TCF-LEF, PAX8 and VHL have been implicated in the re-activation of L1CAM in various types of cancers. There is increasing evidence that micro-RNAs can also have strong effects on gene expression. Here we have identified miR-21-3p as a positive regulator of L1CAM expression. Over-expression of miR-21-3p (miR-21*) but not the complementary sequence miR-21-5p (miR-21) could strongly augment L1CAM expression in renal, endometrial and ovarian carcinoma derived cell lines by an unknown mechanism involving transcriptional activation of the L1CAM gene. In patient cohorts from renal, endometrial and ovarian cancers we observed a strong positive correlation of L1CAM and miR-21-3p expressions. Although L1CAM alone was a reliable marker for overall and disease free survival, the combination of L1CAM and miR-21-3p expressions strongly enhanced the predictive power. Our findings shed new light on the complex regulation of L1CAM in cancers and advocate the use of L1CAM/miR-21-3p for diagnostic application. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Effect of degradative plasmid CAM-OCT on responses of Pseudomonas bacteria to UV light

International Nuclear Information System (INIS)

McBeth, D.L.

1989-01-01

The effect of plasmid CAM-OCT on responses to UV irradiation was compared in Pseudomonas aeruginosa, in Pseudomonas putida, and in Pseudomonas putida mutants carrying mutations in UV response genes. CAM-OCT substantially increased both survival and mutagenesis in the two species. P. aeruginosa strains without CAM-OCT exhibited much higher UV sensitivity than did P. putida strains. UV-induced mutagenesis of plasmid-free P. putida was easily detected in three different assays (two reversion assays and one forward mutation assay), whereas UV mutagenesis of P. aeruginosa without CAM-OCT was seen only in the forward mutation assay. These results suggest major differences in DNA repair between the two species and highlight the presence of error-prone repair functions on CAM-OCT. A number of P. putida mutants carrying chromosomal mutations affecting either survival or mutagenesis after UV irradiation were isolated, and the effect of CAM-OCT on these mutants was determined. All mutations producing a UV-sensitive phenotype in P. putida were fully suppressed by the plasmid, whereas the plasmid had a more variable effect on mutagenesis mutations, suppressing some and producing no suppression of others. On the basis of the results reported here and results obtained by others with plasmids carrying UV response genes, it appears that CAM-OCT may differ either in regulation or in the number and functions of UV response genes encoded

INTEGRASI SOFTWARE CAD-CAM DALAM SISTEM OPERASI MESIN BUBUT CNC

Directory of Open Access Journals (Sweden)

Yuris Setyoadi

2015-12-01

Full Text Available Computer Aided Manufacturing (CAM adalah sebuah teknologi aplikasi yang menggunakan perangkat lunak komputer dan mesin untuk memfasilitasi dan mengotomatisasi proses manufaktur. Computer Aided Manufacturing (CAM adalah penerus dari Computer Aided Engineering (CAE dan sering digunakan bersama dengan Computer-Aided Design (CAD. Bidang manufaktur, perangkat komputer telah dipergunakan untuk mengontrol mesin-mesin produksi otomatis dengan ketepatan tinggi, misalnya mesin CNC. ?é?áArtikel ini membahas tentang penggunaan software CAD-CAM (SOLIDWorks dan CAMWorks yang terintegrasi kemudian diaplikasikan ke mesin bubut CNC yang menggunakan software Mach3, Mach3 adalah software yang bisa mengubah komputer dekstop menjadi sebuah piranti kontroller mesin CNC. Software SOLIDWorks, CAMWorks dan Mach3 diintegrasikan ke dalam sistem operasi mesin bubut CNC sehingga proses koreksi dan modifikasi format perintah gerakan dalam G/M code dapat dilakukan dalam software tersebut.

Development of Leadership Skills in Community College Department Chairs

Science.gov (United States)

Sirkis, Jocelyn Eager

2011-01-01

The role of a community college department chairperson is not well defined and the job is often perceived as more of a burden than an honor. Faculty come to the position frequently by "default" and without a ready set of management and leadership skills. The matter is of concern since chairs influence academic department strategy, culture, and…

Ecohealth Chair on Human and Animal Health in Protected ...

International Development Research Centre (IDRC) Digital Library (Canada)

This project will help establish an Ecohealth Chair in Human and Animal Health in Protected Ecosystems to improve the sustainability of conservation areas and the health of local ... Le nouveau site Web facilitera l'enregistrement des événements démographiques afin d'améliorer l'accès aux services pour tous. Le nouveau ...

Edge strength of CAD/CAM materials.

Science.gov (United States)

Pfeilschifter, Maria; Preis, Verena; Behr, Michael; Rosentritt, Martin

2018-05-16

To investigate the edge force of CAD/CAM materials as a function of (a) material, (b) thickness, and (c) distance from the margin. Materials intended for processing with CAD/CAM were investigated: eight resin composites, one resin-infiltrated ceramic, and a clinically proven lithiumdisilicate ceramic (reference). To measure edge force (that is, load to failure/crack), plates (d = 1 mm) were fixed and loaded with a Vickers diamond indenter (1 mm/min, Zwick 1446) at a distance of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1.0 mm from the edge. Edge force was defined as a loading force at a distance of 0.5 mm. The type of failure was determined. To investigate the influence of the thickness, all data were determined on 1-mm and 2-mm plates. To test the influence of bonding and an underlying dentin, individual 1-mm plates were bonded to a 1-mm-thick dentin-like (concerning modulus of elasticity) resin composite. For the 1-mm plates, edge force varied between 64.4 ± 24.2 N (Shofu Block HC) and 183.2 ± 63.3 N (ceramic reference), with significant (p ≤ 0.001) differences between the materials. For the 2-mm plates, values between 129.2 ± 32.5 N (Lava Ultimate) and 230.3 ± 67.5 N (Cerasmart) were found. Statistical comparison revealed no significant differences (p > 0.109) between the materials. Brilliant Crios (p = 0.023), Enamic (p = 0.000), Shofu Blocks HC (p = 0.009), and Grandio Bloc (p = 0.002) showed significantly different edge force between the 1-mm- and 2-mm-thick plates. The failure pattern was either cracking, (severe) chipping, or fracture. Material, material thickness, and distance from the edge impact the edge force of CAD/CAM materials. CAD/CAM materials should be carefully selected on the basis of their individual edge force and performance during milling. Copyright © 2018 Elsevier Ltd. All rights reserved.

A systematic review of the traits and cognitions associated with use of and belief in complementary and alternative medicine (CAM).

Science.gov (United States)

Galbraith, Niall; Moss, Tim; Galbraith, Victoria; Purewal, Satvinder

2018-08-01

Complementary and alternative medicine (CAM) use is widespread despite the controversy over its effectiveness. Although previous reviews have examined the demographics and attitudes of CAM users, there is no existing review on the traits or cognitions which characterise either CAM users or those who believe in CAM effectiveness. The current systematic review set out to address these gaps in the literature by applying a narrative synthesis. A bibliographic search and manual searches were undertaken and key authors were contacted. Twenty-three papers were selected. The trait openness to experience was positively associated with CAM use but not CAM belief. Absorption and various types of coping were also positively associated with CAM use and belief. No other trait was reliably associated with CAM use or belief. Intuitive thinking and ontological confusions were positively associated with belief in CAM effectiveness; intuitive thinking was also positively associated with CAM use. Studies researching cognitions in CAM use/belief were mostly on non-clinical samples, whilst studies on traits and CAM use/belief were mostly on patients. The quality of studies varied but unrepresentative samples, untested outcome measures and simplistic statistical analyses were the most common flaws. Traits and cognition might be important correlates of CAM use and also of faith in CAM.

Complete Dentures Fabricated with CAD/CAM Technology and a Traditional Clinical Recording Method.

Science.gov (United States)

Janeva, Nadica; Kovacevska, Gordana; Janev, Edvard

2017-10-15

The introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) technology into complete denture (CD) fabrication ushered in a new era in removable prosthodontics. Commercially available CAD/CAM denture systems are expected to improve upon the disadvantages associated with conventional fabrication. The purpose of this report is to present the workflow involved in fabricating a CD with a traditional clinical recording method and CAD/CAM technology and to summarize the advantages to the dental practitioner and the patient.

Search for rapid variability of 53 Cam

International Nuclear Information System (INIS)

Zverko, J.

1982-01-01

Photoelectric observations of magnetic Ap star 53 Cam made at the Skalnate Pleso Observatory in 1978 and 1979 are analyzed from the point of view of rapid variability. The observations were made with an intermediate passband filter, effective wavelength 526 nm. Besides the differences msub(53Cam)-msub(Comp), the behaviour was also investigated of the deflections for the comparison star during the observation runs. A strong correlation between the behaviour of the comparison and variable star light curve was found and the appearance differs from night to night depending on atmospheric conditions. Each observation run is analyzed in detail and it was concluded that all observed variations are only apparent and due to the variability of atmospheric extinction above the observation site. (author)

CLIC main beam quadrupole active pre-alignment based on cam movers

CERN Document Server

Kemppinen, J; Leuxe, R; Mainaud Durand, H; Sandomierski, J; Sosin, M

2012-01-01

Compact Linear Collider (CLIC) is a study for a future 48 km long linear electron-positron collider in the multi TeV range. Its target luminosity can only be reached if the main beam quadrupoles (MB quads) are actively pre-aligned within 17 µm in sliding windows of 200 m with respect to a straight reference line. In addition to the positioning requirement, the pre-alignment system has to provide a rigid support for the nano-stabilization system to ensure that the first eigenfrequency is above 100 Hz. Re-adjustment based on cam movers was chosen for detailed studies to meet the stringent pre-alignment requirements. There are four different types of MB quads in CLIC. Their lengths and masses vary so that at least two types of cam movers have to be developed. The validation of the cams with less stringent space restrictions has proceeded to a test setup in 5 degrees of freedom (DOF). Prototypes of the more demanding, smaller cams have been manufactured and they are under tests in 1 DOF. This paper describes the...

PreCam: A Precursor Observational Campaign for Calibration of the Dark Energy Survey

Energy Technology Data Exchange (ETDEWEB)

Kuehn, K.; Kuhlmann, S.; Allam, S.; Annis, J. T.; Bailey, T.; Balbinot, E.; Bernstein, J. P.; Biesiadzinski, T.; Burke, D. L.; Butner, M.; Camargo, J. I. B.; da Costa, L. A. N.; DePoy, D.; Diehl, H. T.; Dietrich, J. P.; Estrada, J.; Fausti, A.; Gerke, B.; Guarino, V.; Head, H. H.; Kessler, R.; Lin, H.; Lorenzon, W.; Maia, M. A. G.; Maki, L.; Marshall, J.; Nord, B.; Neilsen, E.; Ogando, R. L. C.; Park, D.; Peoples, J.; Rastawicki, D.; Rheault, J. -P.; Santiago, B.; Schubnell, M.; Seitzer, P.; Smith, J. A.; Spinka, H.; Sypniewski, A.; Tarle, G.; Tucker, D. L.; Walker, A. R.; Wester, W.

2013-04-01

PreCam, a precursor observational campaign supporting the Dark Energy Survey (DES), is designed to produce a photometric and astrometric catalog of nearly a hundred thousand standard stars within the DES footprint, while the PreCam instrument also serves as a prototype testbed for the Dark Energy Camera's hardware and software. This catalog represents a potential 100-fold increase in Southern Hemisphere photometric standard stars, and therefore will be an important component in the calibration of the Dark Energy Survey. We provide details on the PreCam instrument's design, construction, and testing, as well as results from a subset of the 51 nights of PreCam survey observations on the University of Michigan Department of Astronomy's Curtis-Schmidt telescope at Cerro Tololo Inter-American Observatory (CTIO). We briefly describe the preliminary data processing pipeline that has been developed for PreCam data and the preliminary results of the instrument performance, as well as astrometry and photometry of a sample of stars previously included in other southern sky surveys.

Chair Design Analysis Of Work To Reduce Musculoskeletal Part 1 Anthropometry Method

Directory of Open Access Journals (Sweden)

Nelfiyanti

2015-08-01

Full Text Available Refilling of fire extinguishers is a key activity in PT Pinaco Utama Indonesia. In these activities the workers doing the work manually with ergonomic postures that can cause a complaint to the musculoskeletal system. In a preliminary study a questionnaire used Nordic Body Map is used to identify specific problems in parts of the body and using REBA Rapid Entire Body Assessment to determine the level of risk working posture. This preliminary study shows that workers have a lot of complaints on the part of their body with a high level of risk and very high. For that we need a tool that can reduce the complaints of the musculoskeletal system. Tools in the form of work chair. The purpose of this study was to design an ergonomic office chair and is equipped with several features to accommodate the needs and conditions in PT Pinaco Utama Indonesia. The first step of this research is to develop the expectations of the office chair features information then is poured into a design concept. Furthermore this concept is manifested in a more specific design taking into account the anthropometric dimensions of the workers. Making the design and production cost calculation is made to perform a feasibility analysis in this research.

75 FR 51450 - Environmental Management Site-Specific Advisory Board Chairs

Science.gov (United States)

2010-08-20

...' Roundtable Discussion: Day One Presentations and Product Development. Thursday, September 16, 2010 [cir] EM... Product Development. Public Participation: The EM SSAB Chairs welcome the attendance of the public at... in the agenda. The Designated Federal Officer is empowered to conduct the meeting in a fashion that...

Initiating a Reiki or CAM program in a healthcare organization--developing a business plan.

Science.gov (United States)

Vitale, Anne

2014-01-01

Complementary and alternative medicine (CAM) services, such as Reiki, continue to be offered to consumers in many hospitals and other health care organizations. There is growing interest among nurses, doctors, and other health care providers for the integration of CAM therapies into traditional settings. Health care organizations are responding to this need but may not know how to start CAM programs. Starting a Reiki program in a health care setting must be envisioned in a business model approach. This article introduces nurses and other health care providers to the basic concepts of business plan development and important steps to follow when starting a Reiki or CAM program.

Correlated Random Systems Five Different Methods : CIRM Jean-Morlet Chair

CERN Document Server

Kistler, Nicola

2015-01-01

This volume presents five different methods recently developed to tackle the large scale behavior of highly correlated random systems, such as spin glasses, random polymers, local times and loop soups and random matrices. These methods, presented in a series of lectures delivered within the Jean-Morlet initiative (Spring 2013), play a fundamental role in the current development of probability theory and statistical mechanics. The lectures were: Random Polymers by E. Bolthausen, Spontaneous Replica Symmetry Breaking and Interpolation Methods by F. Guerra, Derrida's Random Energy Models by N. Kistler, Isomorphism Theorems by J. Rosen and Spectral Properties of Wigner Matrices by B. Schlein. This book is the first in a co-edition between the Jean-Morlet Chair at CIRM and the Springer Lecture Notes in Mathematics which aims to collect together courses and lectures on cutting-edge subjects given during the term of the Jean-Morlet Chair, as well as new material produced in its wake. It is targeted at researchers, i...

Types and sociodemographic correlates of complementary and alternative medicine (CAM) use among people with epilepsy in Oman.

Science.gov (United States)

Al Asmi, Abdullah; Al Maniri, Abdullah; Al-Farsi, Yahya M; Burke, David T; Al Asfoor, Fatema M H; Al Busaidi, Ibrahim; Al Breiki, Mohamed H A; Lahiri, Shaon; Braidy, Nady; Essa, Musthafa M; Al-Adawi, Samir

2013-11-01

Nonpharmacological treatment strategies that originate from sociocultural teachings and are beyond the scope of allopathic medicine are commonly used among people with epilepsy (PWE) in many parts of the world. The present study explored the types and sociodemographic correlates of complementary and alternative medicine (CAM) use among PWE in Oman among attendees of a neurological unit at a tertiary care center. Data on the types of CAM were gathered from telephone interviews. The relevant demographic and clinical characteristics of the participants were obtained from electronic medical records. Of the total of 101 participants, 73.3% were CAM users. The majority of these participants have not disclosed their CAM use to their allopathic health-care providers. The most common types of CAM reported were those falling under the 'mind-body' type (incantations and fumigation) and biologically based (herbal concoctions) or a combination of them. Compared to non-CAM users, a significant and greater proportion of CAM users attributed the etiology of their illness to nonbiomedical factors such as 'evil eyes' (P=0.04). The multivariate logistic regression model indicated that the use of CAM was highly associated with age of Oman. The most utilized type of CAM falls under the umbrella of mind-body practice. © 2013 Elsevier Inc. All rights reserved.

76 FR 35832 - Folding Metal Tables and Chairs From the People's Republic of China: Preliminary Results of...

Science.gov (United States)

2011-06-20

...-Go,'' a folding chair with a tubular steel frame and a seat and back of plastic, with measurements of... polyvinyl chloride, attached to the tubular steel seat frame with screws, and has cross braces affixed to... unassembled folding tables and folding chairs made primarily or exclusively from steel or other metal, as...

Community asset mapping, mobilisation and management (CA/M) approach: a case study

CSIR Research Space (South Africa)

Saidi, MEM

2006-03-01

Full Text Available by the community. The paper will present a practical application and recommendations based on a CA/M implementation in the Imperani Tourism and Training Centre (ITTC) project in Ficksburg. The ITTC experience has contributed to the development of a CA/M Guideline...

Position paper -- Continuous air monitor (CAM) acquisition recommendation

International Nuclear Information System (INIS)

Hughes, M.E.

1995-01-01

The purpose of this position paper is to document the decision not to acquire continuous air monitors (CAM's) from government excess/surplus supplies. The procurement plan for equipment to be acquired for project W-236A, the Multi-Function Waste Tank Facility (MWTF), stipulates that radiation monitoring equipment will be supplied by WHC via the stock retained within the excess/surplus inventory or utilization of procured instruments from canceled projects. Technological advances within the radiation detection industry have ultimately outdated the instruments that are available within the excess/surplus stock. These machines represent the technology of the 1970's era. The CAM models in use or within the excess/surplus supplies are obsolete and have been discontinued by the manufacturer. Therefore, the majority of the excess/surplus CAM's are being reacquired and disassembled by instrument shops for in-house acquisition of spare parts for the instruments that are still presently in-service. It is being recommended by W-236A projects department that the strategy to acquire surplus/excess radiation monitoring devices be modified. The recommendation is to directly procure instruments that are equal to the technology available within this industry

Discoloration of various CAD/CAM blocks after immersion in coffee

Directory of Open Access Journals (Sweden)

Sasipin Lauvahutanon

2017-02-01

Full Text Available Objectives This study evaluated color differences (ΔEs and translucency parameter changes (ΔTPs of various computer-aided design/computer-aided manufacturing (CAD/CAM blocks after immersion in coffee. Materials and Methods Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE L*a*b* values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6. The ΔEs and ΔTPs of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey's multiple comparisons (α = 0.05. The ΔEs after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. Results After one month in coffee, ΔEs of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ΔTPs decreased. The ANOVA of ΔEs and ΔTPs revealed significant differences in two main factors, immersion periods and media, and their interaction except for ΔEs of TEL (Telio CAD, Ivoclar Vivadent. The ΔEs significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC. There was no significant correlation between ΔEs and water sorption or solubility in water. Conclusions The ΔEs of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.

Relationship between Features of Desks and Chairs and Prevalence of Skeletal Disorders in Primary School Students in Abadan

Directory of Open Access Journals (Sweden)

Yadollah Zakeri

2016-11-01

Full Text Available BackgroundSitting on inappropriate benches, as well as the poor posture (body position during the years of growth, can lead to spinal disorders, fatigue and discomfort in students. This study aimed to investigate the relationship between features of desks and chairs and prevalence of some musculoskeletal disorders in primary school students in Abadan.Materials and MethodsThis cross-sectional study was conducted in 2015 in the city of Abadan- South West of Iran; for which, 383 primary school students were selected and studied through cluster sampling method. Data were collected by the checkered board and researcher-made questionnaire. Features and dimensions of desks and chairs of students were recorded and evaluated based on their condition (being standard or not. Statistical analysis was conducted using SPSS, version 22; and then, descriptive statistics and Chi-square test were conducted.ResultsStudy results showed that about 56.1% of the desks and chairs in under study schools were non-standard. It found that drooping shoulder (85.4% and scoliosis (81.7% were the more prevalent disorders and back straight (1.6% was the least frequent disorder. There was a significant relationship between the variable of non-standard desks and chairs and prevalence of drooping shoulders (P=0.001, scoliosis (P= 0.04, kyphosis (P=0.007 and lordosis (P=0.002 disorders in students.ConclusionThe non-standard-sized desks and chairs increase the prevalence of skeletal disorders in schoolchildren. Therefore, it is essential to pay attention to design and build standard classroom desks and chairs, which are best, adjust to students’ physics.

Influence of Different CAM Strategies on the Fit of Partial Crown Restorations: A Digital Three-dimensional Evaluation.

Science.gov (United States)

Zimmermann, M; Valcanaia, A; Neiva, G; Mehl, A; Fasbinder, D

2018-04-09

CAM fabrication is an important step within the CAD/CAM process. The internal fit of restorations is influenced by the accuracy of the subtractive CAM procedure. Little is known about how CAM strategies might influence the fit of CAD/CAM fabricated restorations. The aim of this study was to three-dimensionally evaluate the fit of CAD/CAM fabricated zirconia-reinforced lithium silicate ceramic partial crowns fabricated with three different CAM strategies. The null hypothesis was that different CAM strategies did not influence the fitting accuracy of CAD/CAM fabricated zirconia-reinforced lithium silicate ceramic partial crowns. Preparation for a partial crown was performed on a maxillary right first molar on a typodont. A chairside CAD/CAM system with the intraoral scanning device CEREC Omnicam (Dentsply Sirona, York, PA, USA) and the 3+1 axis milling unit CEREC MCXL was used. There were three groups with different CAM strategies: step bur 12 (12), step bur 12S (12S), and two step-mode (12TWO). The zirconia-reinforced lithium silicate ceramic Celtra Duo (Dentsply Sirona) was used as the CAD/CAM material. A new 3D method for evaluating the fit was applied, consisting of the quadrant scan with the intraoral scanning device CEREC Omnicam. The scan of the PVS material adherent to the preparation and the preparation scan were matched, and the difference analysis was performed with special software OraCheck (Cyfex AG, Zurich, Switzerland). Three areas were selected for analysis: margin (MA), axial (AX), and occlusal (OC). Statistical analysis was performed using 80% percentile, one-way ANOVA, and the post hoc Scheffé test with α=0.05. Statistically significant differences were found both within and between the test groups. The aspect axial fit results varied from 90.5 ± 20.1 μm for the two-step milling mode (12TWO_AX) to 122.8 ± 12.2 μm for the milling with step bur 12S (12S_AX). The worst result in all groups was found for the aspect occlusal fit with the highest

Can Air Seat Cushions and Ball Chairs Improved Classroom Behaviors of Students with Autism Spectrum Disorder: A Single Subject Study

Directory of Open Access Journals (Sweden)

Nader Matin Sadr

2015-06-01

Full Text Available Background: Classroom behaviorsare disturbed in autistic students because of their repetitive, restlessness, and disruptive behaviors. This study aimed to examine the impacts of sitting on a ball, cushion, and/or common chair on classroom behavior of four students with Autism Spectrum Disorder (ASD. Methods: Four children with Autism participated in this single-subject study. Students’ behaviors were video recorded in three phases: Sitting on their common chairs during phase A, air-sit cushioned in phase B, and ball chairs in phase C. Sitting times and on-task/off-task behaviors were quantified by momentary time sampling (every 10 seconds and compared during different phases for important changes. Social validity was taken by the teacher at the end of the research as well. Results: The findings demonstrated increases in on-task and in-seat behaviors in four students when seated on air sit cushioned chairs. Despite rises of ontask behaviors for all students, only two of the students showed enhanced inseat behaviors when seated on therapy balls. Social validity findings indicated that the teacher preferred the use of the balls and air-cushioned chairs for her students. Conclusion: Therapy balls/cushioned chairs for students with ASD may facilitate in-seat and on-task behavior.

Special Section: Complementary and Alternative Medicine (CAM):Quiz on Complementary and Alternative Medicine

Science.gov (United States)

... Special Section CAM Quiz on Complementary and Alternative Medicine Past Issues / Winter 2009 Table of Contents For ... low back pain. True False Complementary and alternative medicine (CAM) includes: Meditation Chiropractic Use of natural products, ...

Tufting enteropathy with EpCAM mutation: case report

Directory of Open Access Journals (Sweden)

Karla Lais Pêgas

2014-06-01

Full Text Available Tufting enteropathy (TE, also known as intestinal epithelial dysplasia (IED, is a rare congenital enteropathy related to an earlyonset of severe intractable diarrhea due to specific abnormalities of the intestinal epithelium and mutations of the EpCAM gene. TE is characterized by clinical and histological heterogeneity, such as with low or without mononuclear cell infiltration of the lamina propria, and abnormalities of basement membrane. TE can be associated with malformations, other epithelial diseases, or to abnormal enterocytes development and/or differentiation. The authors report a case of a Brazilian child with TE associated with c.556-14A>G mutation in the EpCAM gene (NM_002354.2.

Comparative characterization of a novel cad-cam polymer-infiltrated-ceramic-network.

Science.gov (United States)

Albero, Alberto; Pascual, Agustín; Camps, Isabel; Grau-Benitez, María

2015-10-01

The field of dental ceramics for CAD-CAM is enriched with a new innovative material composition having a porous three-dimensional structure of feldspathic ceramic infiltrated with acrylic resins.The aim of this study is to determine the mechanical properties of Polymer-Infiltrated-Ceramic-Network (PICN) and compare its performance with other ceramics and a nano-ceramic resin available for CAD-CAM systems. In this study a total of five different materials for CAD-CAM were investigated. A polymer-infiltrated ceramic (Vita Enamic), a nano-ceramic resin (Lava Ultimate), a feldspathic ceramic (Mark II), a lithium disilicate ceramic (IPS-e max CAD) and finally a Leucite based ceramic (Empress - CAD). From CAD-CAM blocks, 120 bars (30 for each material cited above) were cut to measure the flexural strength with a three-point-bending test. Strain at failure, fracture stress and Weibull modulus was calculated. Vickers hardness of each material was also measured. IPS-EMAX presents mechanical properties significantly better from the other materials studied. Its strain at failure, flexural strength and hardness exhibited significantly higher values in comparison with the others. VITA ENAMIC and LAVA ULTIMATE stand out as the next most resistant materials. The flexural strength, elastic modulus similar to a tooth as well as having less hardness than ceramics make PICN materials an option to consider as a restorative material. Ceramic infiltrated with resin, CAD-CAM, Weibull modulus, flexural strength, micro hardness.

Memory for staged events: Supporting older and younger adults' memory with SenseCam.

Science.gov (United States)

Mair, Ali; Poirier, Marie; Conway, Martin A

2018-03-01

Two experiments measured the effect of retrieval support provided by a wearable camera, SenseCam, on older and younger adults' memory for a recently experienced complex staged event. In each experiment, participants completed a series of tasks in groups, and the events were recalled 2 weeks later, after viewing SenseCam images (experimental condition) or thinking about the event (control condition). When IQ and education were matched, young adults recalled more event details than older adults, demonstrating an age-related deficit for novel autobiographical material. Reviewing SenseCam images increased the number of details recalled by older and younger adults, and the effect was similar for both groups. These results suggest that memory can be supported by the use of SenseCam, but the age-related deficit is not eliminated.

Expression of EpCam and Villin in Barrett’s Esophagus and in Gastric Cardia

Directory of Open Access Journals (Sweden)

Mario Anders

2008-01-01

Full Text Available In the current study we aimed to clarify the potential of EpCAM and villin as in vivo biomarkers for both Barrett esophagus (BE-associated neoplasia and BE versus cardiac mucosa. Immunohistochemical staining in BE with various degrees of intraepithelial neoplasia (IN, Barrett carcinoma (BC and in normal cardiac mucosa (CM revealed a lack of EpCam and villin in squamous esophageal epithelium. All specimens of IN and BC showed EpCam with varying staining intensities. In 57% of CM samples a weak signal was detected; the remainder displayed strong EpCam expression. Villin was found in 97% of BE specimens and in all those with IN; 37% of BC and 75% of CM specimens were also positive. We conclude that expression of EpCam and villin differs only between squamous epithelium and BE. Determination of these proteins does not allow discrimination between different degrees of neoplasia or between esophageal intestinal metaplasia and cardiac mucosa.

Initiative internationale des chaires de recherche | CRDI - Centre de ...

International Development Research Centre (IDRC) Digital Library (Canada)

Initiative de recherche de sept ans dotée d'un budget de 8 millions de dollars canadiens. L'Initiative internationale des chaires de recherche a pour but de jumeler d'éminents chercheurs d'universités du Canada avec des homologues de pays en développement afin de relever quelques-uns des plus grands défis auxquels ...

Quantitative determination of the organ distribution of the cell adhesion molecule cell-CAM 105 by radioimmunoassay

International Nuclear Information System (INIS)

Odin, P.; Oebrink, B.

1987-01-01

The authors have previously identified a 105,000-Da plasma membrane glycoprotein, denoted cell-CAM 105, that is involved in intercellular adhesion of reaggregating rat hepatocytes. In this communication they report on the development of a radioimmunoassay for cell-CAM 105, employing purified cell-CAM 105, specific antisera against the molecule, and formalin-fixed protein A-containing staphylococci for precipitation of the immune complexes. The assay was shown to be sensitive, specific, precise, rapid, and easy to perform. They used this radioimmunoassay in investigations of the occurrence of cell-CAM 105 in different rat organs. Cell-CAM 105 was present in a wide spectrum of organs in varying amounts. The highest concentrations were found in the gastrointestinal tract, liver, some secretory glands, vagina, kidney, and lung. The results were confirmed by immunoblotting, which revealed one distinct protein component, corresponding to cell-CAM 105, in each positive organ

Reliability of Arm Curl and Chair Stand tests for assessing muscular endurance in older people

Directory of Open Access Journals (Sweden)

Boneth M

2012-05-01

Full Text Available Objective: to assess the test-retest reliability and level of agreement between measures of the 30 second (30-s Arm Curl and 30-s Chair Stand test in a sample of older adults from Bucaramanga. Materials and methods: a study of evaluation of diagnostic technology was done. Both tests were administered by the same evaluator to 111 adults older than 59 year-old (70,4 ± 7,3, on two occasions, with an interval of time between measures of 4 to 8 days. In the analysis, test-retest reliability was determined using the Intraclass Correlation Coefficient ICC= 2,1 with their confidence interval 95% (CI 95% respective. The agreement level was established by the Bland and Altman method. Results: the test-retest reproducibility of the 30-s Arm Curl test was very good ICC= 0,88 and to the Chair Stand test was good ICC= 0,78. The agreement was very good for both tests of muscle endurance. The CI 95% were between -3,8 and 3,2 stands to 30-s Chair Stand test and between -3,1 and 2,8 curls to 30-s Arm Curl test. Conclusion: the 30-s Arm Curl and 30-s Chair Stand test have good reliability and agreement to assess muscle endurance in older adults functionally independent.

Organizing awareness and increasing emotion regulation: revising chair work in emotion-focused therapy for borderline personality disorder.

Science.gov (United States)

Pos, Alberta E; Greenberg, Leslie S

2012-02-01

Emotion-focused therapy (EFT) is an empirically supported treatment that may have potential as a stage-two treatment for borderline personality disorder (BPD). Specific aspects of BPD--the tendency to experience fluctuating self-states; weakness in meta-cognitive or reflective functioning; and the tendency for self-states to be organized by presently occurring interpersonal processes--present challenges to applying some EFT interventions with this population. In particular, even within a highly attuned, validating and accepting empathic relationship, clients with BPD may have difficulty with the usual manualizations of chair work interventions. This is because these interventions often employ polarization and intensification of experience in order to activate adaptive alternate emotional resources and self organizations. For the client with borderline personality disorder, these interventions may be counter-productive, emotionally dysregulating and disorganizing. EFT chair work, however, also has the potential to provide structure to the borderline clients experience of self, to stimulate metacognitive awareness, provide an alive experience of the process of polarization, attenuate emotional activation, and increase the experience of self-coherence. This article describes the development of stepwise approximations of EFT two-chair intervention for self-critical splits. It outlines potential stages of two-chair work as well as intervention principles important for productive chair work with this population. The EFT change principles of awareness, expression regulation, reflection, transformation, and corrective experience still centrally apply. However, several additional strategies are discussed to scaffold clients' capacity to both experience and regulate emotion.

Is Ep-CAM Expression a Diagnostic and Prognostic Biomarker for Colorectal Cancer? A Systematic Meta-Analysis

Directory of Open Access Journals (Sweden)

Susu Han

2017-06-01

Conclusions: The present findings suggest that Ep-CAM expression may be associated with CRC carcinogenesis, while the loss of Ep-CAM expression is correlated with the progression, metastasis, and poor prognosis of CRC. Ep-CAM expression may be a useful biomarker for the clinical diagnosis of CRC.

Use of Complementary and Alternative Medicine (CAM) in cancer patients: An Italian multicenter survey.

Science.gov (United States)

Berretta, Massimiliano; Della Pepa, Chiara; Tralongo, Paolo; Fulvi, Alberto; Martellotta, Ferdinando; Lleshi, Arben; Nasti, Guglielmo; Fisichella, Rossella; Romano, Carmela; De Divitiis, Chiara; Taibi, Rosaria; Fiorica, Francesco; Di Francia, Raffaele; Di Mari, Anna; Del Pup, Lino; Crispo, Anna; De Paoli, Paolo; Santorelli, Adriano; Quagliariello, Vincenzo; Iaffaioli, Rosario Vincenzo; Tirelli, Umberto; Facchini, Gaetano

2017-04-11

Complementary and Alternative Medicine (CAM) include a wide range of products (herbs, vitamins, minerals, and probiotics) and medical practices, developed outside of the mainstream Western medicine. Patients with cancer are more likely to resort to CAM first or then in their disease history; the potential side effects as well as the costs of such practices are largely underestimated. We conducted a descriptive survey in five Italian hospitals involving 468 patients with different malignancies. The survey consisted of a forty-two question questionnaire, patients were eligible if they were Italian-speaking and receiving an anticancer treatment at the time of the survey or had received an anticancer treatment no more than three years before participating in the survey. Of our patients, 48.9% said they use or have recently used CAM. The univariate analysis showed that female gender, high education, receiving treatment in a highly specialized institute and receiving chemotherapy are associated with CAM use; at the multivariate analysis high education (Odds Ratio, (OR): 1.96 95% Confidence Interval, CI, 1.27-3.05) and receiving treatment in a specialized cancer center (OR: 2.75 95% CI, 1.53-4.94) were confirmed as risk factors for CAM use. Roughly half of our patients receiving treatment for cancer use CAM. It is necessary that health professional explore the use of CAM with their cancer patients, educate them about potentially beneficial therapies in light of the limited available evidence of effectiveness, and work towards an integrated model of health-care provision.

Transcription factors and molecular epigenetic marks underlying EpCAM overexpression in ovarian cancer

NARCIS (Netherlands)

van der Gun, B. T. F.; de Groote, M. L.; Kazemier, H. G.; Arendzen, A. J.; Terpstra, P.; Ruiters, M. H. J.; McLaughlin, P. M. J.; Rots, M. G.

2011-01-01

BACKGROUND: The epithelial cell adhesion molecule (EpCAM) is overexpressed on carcinomas, and its downregulation inhibits the oncogenic potential of multiple tumour types. Here, we investigated underlying mechanisms of epcam overexpression in ovarian carcinoma. METHODS: Expression of EpCAM and DNA

The Characteristics of High School Department Chairs: A National Perspective

Science.gov (United States)

DeAngelis, Karen J.

2013-01-01

Department chairs occupy a potentially important leadership position in high schools, yet little is known about them, particularly with regard to who they are and how they compare to other high school teachers. This is surprising given growing expectations for distributed leadership practice in schools. In this study, I utilize a national dataset…

Illness narratives in cancer: CAM and spiritual practices

DEFF Research Database (Denmark)

Ulrich, Anita; Evron, Lotte; Ostenfeld-Rosenthal, Ann

2011-01-01

Objectives: In this paper,we investigate Danish cancer patients’ narratives on spiritual beliefs and practices and the relationship these practices may have to complementary and alternative medicine (CAM). Design: Narrative inquiry is used to uncover how spiritual beliefs and practices may......, religious and spiritual issues were not extensively unfolded in participants’ illness narratives. However, these issues were significantly elaborated on in narratives by four female participants. Conclusion: We propose that for some cancer patients CAM may function, not only or primarily as a treatment...... for cancer related symptoms and side effects, but as a spiritual practice as well. For some individuals this may be true to an even higher extent than in established religious institutions....

Sources of CAM3 vorticity bias during northern winter from diagnostic study of the vorticity equation

Energy Technology Data Exchange (ETDEWEB)

Grotjahn, Richard [University of California, Department of Land, Air and Water Resources, Davis, CA (United States); Pan, Lin-Lin; Tribbia, Joseph [National Center for Atmospheric Research, Boulder, CO (United States)

2011-06-15

CAM3 (Community Atmosphere Model version 3) simulation bias is diagnosed using the vorticity equation. The study compares CAM3 output with ECMWF (European Centre for Medium-Range Weather Forecasts) 40 year reanalysis (ERA-40) data. A time mean vorticity bias equation is also formulated and the terms are grouped into categories: linear terms, nonlinear terms, transient contributions, and friction (calculated as a residual). Frontal cyclone storms have much weaker band passed kinetic energy and enstrophy in CAM3. The downstream end of the North Atlantic storm track (NAST) has large location error. While the vorticity equation terms have similar amplitude ranking in CAM3 and ERA-40 at upper levels, the ranking differs notably in the lower troposphere. The linear and friction terms dominate the vorticity bias equation. The transient terms contribute along the storm track, but the nonlinear terms are generally much smaller, with the primary exception being over the Iberian peninsula. Friction is much stronger in CAM3. As evidence, nearly all wavelengths (including the longest planetary waves) have smaller amplitude in CAM3 than in ERA-40 vorticity data. Negative near surface vorticity tendency bias on the European side of the Arctic is linked to the NAST track error (evident in the divergence term). CAM3 misses the Beaufort high in sea level pressure (SLP) due to low level warm temperature bias, too little vortex compression, and to too little horizontal advection of negative vorticity compared with ERA-40. Generally lower SLP values in CAM3 over the entire Arctic follow from lower level warm bias in CAM3. (orig.)

Screening for retinopathy of prematurity-a comparison between binocular indirect ophthalmoscopy and RetCam 120

Directory of Open Access Journals (Sweden)

Shah Parag

2006-01-01

Full Text Available Aim: To compare the photographic screening for retinopathy of prematurity (ROP using RetCam 120 with binocular indirect ophthalmoscope (BIO, which is the current gold standard. Setting and Design: Prospective, comparative study. Materials and Methods: A total of 87 RetCam examinations were performed on 27 premature babies. They were stored in a separate file after deleting the identifying information. At the same visit using the BIO with scleral depression, an experienced vitreoretinal surgeon evaluated the fundus in detail. A masked examiner then evaluated the RetCam photographs for presence or absence of ROP, the stage and zone of the disease, and the presence or absence of plus disease. These data were then compared with the BIO findings to determine the sensitivity, specificity, and the positive and negative predictive values of the method. Results: ROP was detected in 63 of 87 examinations by BIO and in 56 of 87 RetCam examinations. Nine RetCam examinations were false-negative and two were false-positive. Sensitivity of RetCam was 85.71% (54/63 and specificity was 91.66% (22/24. The positive and negative predictive values were 96.43% and 70.97% respectively. Conclusion: Nine cases having ROP were missed by the RetCam. All these cases were either in zone 3 or the outer part of zone 2, which later regressed. These were missed mostly because of the restricted mobility of the camera head caused by its size and the barrier caused by the lid speculum arms. No case of threshold ROP was missed. RetCam may replace BIO for screening of ROP.

Determination of a sagittal plane axis of rotation for a dynamic office chair.

Science.gov (United States)

Bauer, C M; Rast, F M; Böck, C; Kuster, R P; Baumgartner, D

2018-10-01

This study investigated the location of the axis of rotation in sagittal plane movement of the spine in a free sitting condition to adjust the kinematics of a mobile seat for a dynamic chair. Dynamic office chairs are designed to avoid continuous isometric muscle activity, and to facilitate increased mobility of the back during sitting. However, these chairs incorporate increased upper body movement which could distract office workers from the performance of their tasks. A chair with an axis of rotation above the seat would facilitate a stable upper back during movements of the lower back. The selection of a natural kinematic pattern is of high importance in order to match the properties of the spine. Twenty-one participants performed four cycles of flexion and extension of the spine during an upper arm hang on parallel bars. The location of the axis of rotation relative to the seat was estimated using infrared cameras and reflective skin markers. The median axis of rotation across all participants was located 36 cm above the seat for the complete movement and 39 cm for both the flexion and extension phases, each with an interquartile range of 20 cm. There was no significant effect of the movement direction on the location of the axis of rotation and only a weak, non-significant correlation between body height and the location of the axis of rotation. Individual movement patterns explained the majority of the variance. The axis of rotation for a spinal flexion/extension movement is located above the seat. The recommended radius for a guide rail of a mobile seat is between 36 cm and 39 cm. Copyright © 2018 Elsevier Ltd. All rights reserved.

Estudo anatômico do terço proximal do fêmur: impacto femoroacetabular e o efeito cam Anatomic study of the proximal third of the femur: femoroacetabular impact and the cam effect

Directory of Open Access Journals (Sweden)

Pedro José Labronici

2009-04-01

Full Text Available OBJETIVO: Analisar as varia��ões anatômicas da extremidade proximal do fêmur que pudessem desenvolver o impacto femoroacetabular. MÉTODOS: Foram utilizados 199 espécimes anatômicos de fêmures esqueleticamente maduros. Os fêmures foram medidos para determinar o ângulo da anteversão do colo femoral, ângulo cervicodiafisário, esfericidade da cabeça femoral em ântero-posterior e súpero-inferior, ângulo entre a epífise e o colo femoral anterior, ângulo entre a epífise e o colo em perfil, distância em ântero-posterior a 5mm da junção cabeça e colo e distância em ântero-posterior da base do colo. RESULTADOS: Observou-se que o subgrupo com impacto apresentou diâmetro da junção a 5mm (p = 0,0001 e cam-cabeça (% (p = 0,0001 significativamente maiores e base-cam (% (p = 0,0001 significativamente menor que o subgrupo sem impacto. Identificou-se que cam-cabeça (% > 80 e base-cam (% OBJECTIVE: to analyze anatomical variations of the proximal end of femur that could cause a femoroacetabular impact. METHODS: 199 skeletically mature anatomical specimens of femurs were used. The femurs were measured in order to determine the anteversion angle of the femoral neck, neckshaft angle, sphericity of the femoral head at anteroposterior and superoinferior, angle between epiphysis and the anterior femoral neck, angle between epiphysis and the neck at lateral plane, anteroposterior distance at 5mm of the head and neck junction and anteroposterior distance of the neck base. RESULTS: we found that the impact subgroup presented a significantly larger junction diameter of 5mm (p = 0.0001 and cam-head (% (p= 0.0001, while base-cam (% (p = 0.0001 showed a significantly smaller diameter than the subgroup without impact. It was identified that cam-head (% > 80 e base-cam (% < 73 were identified as the optimal impact points. CONCLUSION: our study showed that the effect cam, caused by anatomical variations of the proximal femoral end focused the

Machinability of CAD-CAM materials.

Science.gov (United States)

Chavali, Ramakiran; Nejat, Amir H; Lawson, Nathaniel C

2017-08-01

Although new materials are available for computer-aided design and computer-aided manufacturing (CAD-CAM) fabrication, limited information is available regarding their machinability. The depth of penetration of a milling tool into a material during a timed milling cycle may indicate its machinability. The purpose of this in vitro study was to compare the tool penetration rate for 2 polymer-containing CAD-CAM materials (Lava Ultimate and Enamic) and 2 ceramic-based CAD-CAM materials (e.max CAD and Celtra Duo). The materials were sectioned into 4-mm-thick specimens (n=5/material) and polished with 320-grit SiC paper. Each specimen was loaded into a custom milling apparatus. The apparatus pushed the specimens against a milling tool (E4D Tapered 2016000) rotating at 40 000 RPM with a constant force of 0.98 N. After a 6-minute timed milling cycle, the length of each milling cut was measured with image analysis software under a digital light microscope. Representative specimens and milling tools were examined with scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy. The penetration rate of Lava Ultimate (3.21 ±0.46 mm/min) and Enamic (2.53 ±0.57 mm/min) was significantly greater than that of e.max CAD (1.12 ±0.32 mm/min) or Celtra Duo (0.80 ±0.21 mm/min) materials. SEM observations showed little tool damage, regardless of material type. Residual material was found on the tools used with polymer-containing materials, and wear of the embedding medium was seen on the tools used with the ceramic-based materials. Edge chipping was noted on cuts made in the ceramic-based materials. Lava Ultimate and Enamic have greater machinability and less edge chipping than e.max CAD and Celtra Duo. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

S-Cam 3: Optical astronomy with a STJ-based imaging spectrophotometer

International Nuclear Information System (INIS)

Verhoeve, P.; Martin, D.D.E.; Hijmering, R.A.; Verveer, J.; Dordrecht, A. van; Sirbi, G.; Oosterbroek, T.; Peacock, A.

2006-01-01

S-Cam 3 is the third generation of a cryogenic camera, based on superconducting tunnel junctions (STJs), for ground-based optical astronomy, deployed at the 4.2 m William Herschel Telescope (WHT) at La Palma (Spain). It exploits a 10x12 pixel array of Ta/Al STJs, covering a field of view of ∼9''x11'' on the sky. The wavelength band extends from 330-750 nm, with a wavelength resolving power of ∼10 at 500 nm. The detectors are operated at ∼285 mK, achieved with a double stage 4 He- 3 He sorption cooler. Each pixel has its own electronic readout chain at room temperature, with a JFET-based charge sensitive preamplifier. The instrument has undergone extensive testing and calibration, followed by the first observation campaign at La Palma in July 2004. This campaign has focused on point sources with time variability, exploiting the instrument's unique combination of spectrophotometry with high time resolution

A Space Cam Mechanism for Power Transmission of an Opposite-cylinder Piston Engine

Directory of Open Access Journals (Sweden)

Zhang Haoyue

2015-01-01

Full Text Available For the purpose of improving the engine’s power density, we put forward a new type of power transmission mechanism which is used for opposed-cylinder engine. The gas pressure acts on the cam through the piston and push rod, and the spindle rotation of external is driven by the cam. The design of spatial cam work surface is completed by using the enveloping theory of a family of space curves, the force between roller and cam is analyzed using dynamic analysis software. Under the condition of equal number, size and stroke of piston, the new one with larger power density is more compact in structure than the traditional power transmission mechanism, and the reaction force on either side of the main shaft and the acting force between pistons and cylinders are smaller than those in traditional one, which prolongs the service life of the pistons.

Application of CAD/CAE/CAM in forging process: a review

International Nuclear Information System (INIS)

Ahmad Baharuddin Abdullah; Hamouda, A.M.S.

2005-01-01

Forging can be described as the process in which metal is plastically deformed with application of huge pressure. The process not only changes the shape but also improves the properties of the forged parts due to grain size refinement. Conventionally, the empirical trial and error method has been applied, but recently there are various tools are employed to improved product quality and economic of the process. For example, Computer Aided Design (CAD) is widely used in modeling of the process, while Computer Aided Engineering (CAE) tools have been utilized in analyzing the process. To physically demonstrate the process, Computer Aided Manufacturing (CAM) such as CNC machine has been exploited. In order to improve forging process efficiency, an integrated system that combines all advantages of CAD, CAM and CAE need to be developed. This paper presents an overview of computer aided simulation such as CAD, CAE and CAM application in forging process. (Author)

Severe cerebral desaturation during shoulder arthroscopy in the beach-chair position

DEFF Research Database (Denmark)

Dippmann, Christian; Winge, Søren; Nielsen, Henning Bay

2010-01-01

During shoulder arthroscopy in the beach-chair position, cerebral ischemia may be a serious complication because prolonged hypotension may affect regional cerebral oxygen supply. We present the cases of 2 patients in whom a reduction in mean arterial pressure after anesthesia provoked a decrease...

Can a smart chair improve the sitting behavior of office workers?

NARCIS (Netherlands)

Roossien, C. C.; Stegenga, J.; Hodselmans, A. P.; Spook, S. M.; Koolhaas, W.; Brouwer, S.; Verkerke, G. J.; Reneman, Michiel F.

2017-01-01

Prolonged sitting can cause health problems and musculoskeletal discomfort. There is a need for objective and non-obstructive means of measuring sitting behavior. A ‘smart’ office chair can monitor sitting behavior and provide tactile feedback, aiming to improve sitting behavior. This study aimed to

The use of complementary alternative medicine (CAM) in 1 001 German adults: results of a population-based telephone survey.

Science.gov (United States)

Bücker, B; Groenewold, M; Schoefer, Y; Schäfer, T

2008-01-01

The objective of this study was to evaluate the patterns of use of complementary alternative medicine (CAM) in a representative adult population in Germany. A population-based telephone survey was conducted in Lübeck, Germany. We performed computer-assisted telephone interviews (CATI) in order to obtain information on demographics, health status, prevalence of CAM usage, motivation for using CAM, type of CAM and health problems for which CAM were used. 1,001 adults (median age 48 years) participated in the study (response 46.8%). 79.6% of the interviewed subjects reported health problems. The most frequently named problems were chronic pain (45.3%), circulation problems (32.9%) and colds with fever (27.8%). Non-users of CAM had a lower incidence (76.6%) of overall illness than users (83.5%) (OR 0.65, 0.47-0.89). 42.3% of the participants had used CAM. The CAM user group consisted of significantly more females (72.8 vs. 55.5%) (OR 2.32, 1.74-3.08) and involved better educated subjects (school education >12 years, 36.6 vs. 27.9%, OR 3.25, 1.35-7.81) than the non-user group. The main health problems for which CAM was used were chronic pain (36.3%), some cases of uncomplicated colds (16.9%) and for improving general health (14.7%). Three procedures accounted for the majority of usage: Acupuncture (34.5%), homeopathy (27.3%) and herbal medicine (9.7%). A large number of participants reported as the main reason for using CAM the wish to avoid drugs as much as possible (31.7%). 26.7% reported opting for CAM due to the recommendation of their physician. 23.9% gave unsatisfactory results of conventional medicine as reason for CAM usage. CAM is used widely for different complaints by the general population. This frequent use of CAM has implications for the health-care system and health policy.

Optional use of CAM photosynthesis in two C4 species, Portulaca cyclophylla and Portulaca digyna.

Science.gov (United States)

Holtum, Joseph A M; Hancock, Lillian P; Edwards, Erika J; Winter, Klaus

2017-07-01

Low levels of crassulacean acid metabolism (CAM) are demonstrated in two species with C 4 photosynthesis, Portulaca cyclophylla and P. digyna. The expression of CAM in P. cyclophylla and P. digyna is facultative, i.e. optional. Well-watered plants did not accumulate acid at night and exhibited gas-exchange patterns consistent with C 4 photosynthesis. CAM-type nocturnal acidification was reversible in that it was induced following drought and lost when droughted plants were rewatered. In P. cyclophylla, droughting was accompanied by a small but discernible net uptake of CO 2 during the dark, whereas in P. digyna, net CO 2 exchange at night approached the CO 2 compensation point but did not transition beyond it. This report brings the number of known C 4 species with a capacity for expressing CAM to six. All are species of Portulaca. The observation of CAM in P. cyclophylla and P. digyna is the first for species in the opposite-leaved (OL) Portulacelloid-anatomy lineage of Portulaca and for the Australian clade therein. The other four species are within the alternate-leaved (AL) lineage, in the Atriploid-anatomy Oleracea and the Pilosoid-anatomy Pilosa clades. Studies of the evolutionary origins of C 4 and CAM in Portulaca will benefit from a more wide-range survey of CAM across its species, particularly in the C 3 -C 4 intermediate-containing Cryptopetala clade. Copyright © 2017 Elsevier GmbH. All rights reserved.

The influence of polishing techniques on pre-polymerized CAD\\CAM acrylic resin denture bases.

Science.gov (United States)

Alammari, Manal Rahma

2017-10-01

Lately, computer-aided design and computer-aided manufacturing (CAD/CAM) has broadly been successfully employed in dentistry. The CAD/CAM systems have recently become commercially available for fabrication of complete dentures, and are considered as an alternative technique to conventionally processed acrylic resin bases. However, they have not yet been fully investigated. The purpose of this study was to inspect the effects of mechanical polishing and chemical polishing on the surface roughness (Ra) and contact angle (wettability) of heat-cured, auto-cured and CAD/CAM denture base acrylic resins. This study was conducted at the Advanced Dental Research Laboratory Center of King Abdulaziz University from March to June 2017. Three denture base materials were selected: heat cure poly-methylmethacrylate resin, thermoplastic (polyamide resin) and (CAD\\CAM) denture base resin. Sixty specimens were prepared and divided into three groups, twenty in each. Each group was divided according to the polishing techniques into (Mech P) and (Chem P), ten specimens in each; surface roughness and wettability were investigated. Data were analyzed by SPSS version 22, using one-way ANOVA and Pearson coefficient. One-way analysis of variance (ANOVA) and post hoc tests were used for comparing the surface roughness values between three groups which revealed a statistical significant difference between them (p 1 CAD\\CAM denture base material (group III) showed the least mean values (1.08±0.23, 1.39±0.31, Mech P and Chem P respectively). CAD/CAM showed the least contact angle in both polishing methods, which were statistically significant at 5% level (p=0.034 and pCAD\\CAM denture base resin with superior smooth surface compared to chemical polishing. Mechanical polishing is considered the best effective polishing technique. CAD/CAM denture base material should be considered as the material of choice for complete denture construction in the near future, especially for older dental

The effectiveness of a chair intervention in the workplace to reduce musculoskeletal symptoms. A systematic review

Directory of Open Access Journals (Sweden)

van Niekerk Sjan-Mari

2012-08-01

Full Text Available Abstract Background Prolonged sitting has been associated with musculoskeletal dysfunction. For desk workers, workstation modifications frequently address the work surface and chair. Chairs which can prevent abnormal strain of the neuromuscular system may aid in preventing musculo-skeletal pain and discomfort. Anecdotally, adjustability of the seat height and the seat pan depth to match the anthropometrics of the user is the most commonly recommended intervention. Within the constraints of the current economic climate, employers demand evidence for the benefits attributed to an investment in altering workstations, however this evidence-base is currently unclear both in terms of the strength of the evidence and the nature of the chair features. The purpose of this study was to evaluate the evidence for the effectiveness of chair interventions in reducing workplace musculoskeletal symptoms. Methods Pubmed, Cinahl, Pedro, ProQuest, SCOPUS and PhysioFocus were searched. ‘Ergonomic intervention’, ‘chair’, ‘musculoskeletal symptoms’, ‘ergonomics’, ‘seated work’ were used in all the databases. Articles were included if they investigated the influence of chair modifications as an intervention; participants were in predominantly seated occupations; employed a pre/post design (with or without control or randomising and if the outcome measure included neuro-musculoskeletal comfort and/or postural alignment. The risk of bias was assessed using a tool based on The Cochrane Handbook. Results Five studies were included in the review. The number of participants varied from 4 to 293 participants. Three of the five studies were Randomised Controlled Trials, one pre and post-test study was conducted and one single case, multiple baselines (ABAB study was done. Three studies were conducted in a garment factory, one in an office environment and one with university students. All five studies found a reduction in self-reported musculoskeletal pain

Does Academic Blogging Enhance Promotion and Tenure? A Survey of US and Canadian Medicine and Pediatric Department Chairs.

Science.gov (United States)

Cameron, Christian Blake; Nair, Vinay; Varma, Manu; Adams, Martha; Jhaveri, Kenar D; Sparks, Matthew A

2016-06-23

Electronic educational (e-learning) technology usage continues to grow. Many medical journals operate companion blogs (an application of e-learning technology) that enable rapid dissemination of scientific knowledge and discourse. Faculty members participating in promotion and tenure academic tracks spend valuable time and effort contributing, editing, and directing these medical journal blogs. We sought to understand whether chairs of medicine and pediatric departments acknowledge blog authorship as academic achievement. The authors surveyed 267 chairs of US and Canadian medicine and pediatric departments regarding their attitudes toward the role of faculty participation in e-learning and blogging in the promotion and tenure process. The survey completion rate was 22.8% (61/267). A majority of respondents (87%, 53/61) viewed educational scholarship as either important or very important for promotion. However, only 23% (14/61) perceived importance to faculty effort in producing content for journal-based blogs. If faculty were to participate in blog authorship, 72% (44/61) of surveyed chairs favored involvement in a journal-based versus a society-based or a personal (nonaffiliated) blog. We identified a "favorable group" of chairs (19/59, 32%), who rated leadership roles in e-learning tools as important or very important, and an "unfavorable group" of chairs (40/59, 68%), who rated leadership roles in e-learning tools as somewhat important or not important. The favorable group were more likely to be aware of faculty bloggers within their departments (58%, 11/19 vs 25%, 10/40), viewed serving on editorial boards of e-learning tools more favorably (79%, 15/19 vs 31%, 12/39), and were more likely to value effort spent contributing to journal-based blogs (53%, 10/19 vs 10%, 4/40). Our findings demonstrate that although the majority of department chairs value educational scholarship, only a minority perceive value in faculty blogging effort.

Complementary and alternative medicine (CAM) practices and dietary patterns in children with inflammatory bowel disease in Singapore and Malaysia.

Science.gov (United States)

Ong, Fangyi; Seah Lee, Way; Lin, Charlotte; Ng, Ruey Terng; Yee Wong, Shin; Lim, Su Lin; Quak, Seng Hock; Aw, Marion

2017-12-26

The use of complementary and alternative medicine (CAM) has been associated with adverse effects and self-imposed dietary restrictions. The prevalence of its use in Asian children with inflammatory bowel disease (IBD) is unknown. We aimed to determine the prevalence, types, and factors associated with the use of CAM among children with IBD from Singapore and Malaysia, and to ascertain if dietary restriction was prevalent in patients who used CAM. A cross-sectional study was conducted in which parents of children with IBD attending two tertiary pediatric IBD referral centres in Singapore and Malaysia were interviewed. Data about demographics, conventional treatment, complementary therapies and dietary patterns were collected in a questionnaire. Of 64 children with IBD interviewed, 83% (n = 53) reported the use of CAM (Singapore [90%] vs. Malaysia [76%]; p = 0.152). The median number of CAM agents used was two (range 1-10). The three most common types of CAM used were probiotics (64%), vitamin and mineral supplements (55%), and food-based therapies (36%). Among individual CAM categories, the use of food-based therapies was correlated significantly with nationality (r = 0.497, p history of weight loss due to IBD (r = 0.340, p = 0.013) and avoidance of certain foods to prevent a relapse (r = 0.289, p = 0.036). Parents who rated their child's disease activity as more severe were less likely to use CAM (r = -0.257, p = 0.041). Fifty-nine percent of CAM users reported physician awareness of their CAM use. The overall self-perceived efficacy of CAM in improving IBD symptoms was 34%. Of the dietary patterns explored, only intake of dairy products was associated with CAM use (r = 0.306, p = 0.019). Use of CAM is prevalent in children with IBD in Malaysia and Singapore. Further studies to elucidate reasons influencing CAM use, dietary patterns and efficacy of commonly used CAM would be required. Copyright © 2018. Published by Elsevier B.V.

Complementary and alternative medicine (CAM) use in an Italian cohort of pediatric headache patients: the tip of the iceberg.

Science.gov (United States)

Dalla Libera, D; Colombo, B; Pavan, G; Comi, G

2014-05-01

The use of complementary alternative medicine (CAM) in paediatric populations is considerably increased, especially for pain and chronic conditions, as demonstrated by epidemiological surveys both in Europe and in the USA. In our study, CAM was used in 76 % patients of a cohort of 124 children affected by headache (age 4-16 years; 67 % female; 70 % migraine without aura, 12 % migraine with aura, 18 % tensive headache according to IHS criteria) consecutively recruited at a Pediatric Headache University Center. CAM was used as preventive treatment in 80 % cases. The main reasons for seeking CAM were: the wish of avoiding chronic use of drugs with their related side effects, the desire of an integrated approach, the reported inefficacy of conventional medicine, and a more suitable children disposition to CAM than to pharmacological compound. Female gender, younger age, migraine without aura, parents' higher educational status, maternal use of CAM and other associated chronic conditions, correlated with CAM use (p CAM also to treat other diseases (i.e. allergies, colitis, asthma, insomnia, muscle-scheletric disorders and dysmenorrhoea). The most assumed CAM were: herbal remedies (64 %) such as Valeriana, Ginkgo biloba, Boswellia serrata, Vitex agnus-castus, passion flower, Linden tree; vitamins/minerals supplements (40 %) with magnesium, 5-Hydroxytryptophan, vitamin B6 or B12, Multivitamin compounds; Homeopathy (47 %) with Silicea, Ignatia Amara, Pulsatilla, Aconitum, Nux Vomica, Calcarea phosphorica; physical treatment (45 %) such as Ayurvedic massage, shiatsu, osteopathy; yoga (33 %); acupuncture (11 %). CAM-often integrated with conventional care-was auto-prescribed in 30 % of the cases, suggested by non-physician in 22 %, by the General Practitioner in 24 % and by paediatrician in 24 %. Both general practitioners and neurologists were mostly unaware of their patients' CAM use. In conclusion, neurologists should inquire for CAM use and be prepared to learn about CAM

Understanding, perceptions and self-use of complementary and alternative medicine (CAM) among Malaysian pharmacy students.

Science.gov (United States)

Hasan, Syed S; Yong, Chew S; Babar, Muneer G; Naing, Cho M; Hameed, Abdul; Baig, Mirza R; Iqbal, Shahid M; Kairuz, Therese

2011-10-13

In recent times the basic understanding, perceptions and CAM use among undergraduate health sciences students have become a topic of interest. This study was aimed to investigate the understanding, perceptions and self-use of CAM among pharmacy students in Malaysia. This cross-sectional study was conducted on 500 systematically sampled pharmacy students from two private and one public university. A validated, self-administered questionnaire comprised of seven sections was used to gather the data. A systematic sampling was applied to recruit the students. Both descriptive and inferential statistics were applied using SPSS® version 18. Overall, the students tend to disagree that complementary therapies (CM) are a threat to public health (mean score = 3.6) and agreed that CMs include ideas and methods from which conventional medicine could benefit (mean score = 4.7). More than half (57.8%) of the participants were currently using CAM while 77.6% had used it previously. Among the current CAM modalities used by the students, CM (21.9%) was found to be the most frequently used CAM followed by Traditional Chinese Medicine (TCM) (21%). Most of the students (74.8%) believed that lack of scientific evidence is one of the most important barriers obstructing them to use CAM. More than half of the students perceived TCM (62.8%) and music therapy (53.8%) to be effective. Majority of them (69.3%) asserted that CAM knowledge is necessary to be a well-rounded professional. This study reveals a high-percentage of pharmacy students who were using or had previously used at least one type of CAM. Students of higher professional years tend to agree that CMs include ideas and methods from which conventional medicine could benefit.

Understanding, perceptions and self-use of complementary and alternative medicine (CAM among Malaysian pharmacy students

Directory of Open Access Journals (Sweden)

Baig Mirza R

2011-10-01

Full Text Available Abstract Background In recent times the basic understanding, perceptions and CAM use among undergraduate health sciences students have become a topic of interest. This study was aimed to investigate the understanding, perceptions and self-use of CAM among pharmacy students in Malaysia. Methods This cross-sectional study was conducted on 500 systematically sampled pharmacy students from two private and one public university. A validated, self-administered questionnaire comprised of seven sections was used to gather the data. A systematic sampling was applied to recruit the students. Both descriptive and inferential statistics were applied using SPSS® version 18. Results Overall, the students tend to disagree that complementary therapies (CM are a threat to public health (mean score = 3.6 and agreed that CMs include ideas and methods from which conventional medicine could benefit (mean score = 4.7. More than half (57.8% of the participants were currently using CAM while 77.6% had used it previously. Among the current CAM modalities used by the students, CM (21.9% was found to be the most frequently used CAM followed by Traditional Chinese Medicine (TCM (21%. Most of the students (74.8% believed that lack of scientific evidence is one of the most important barriers obstructing them to use CAM. More than half of the students perceived TCM (62.8% and music therapy (53.8% to be effective. Majority of them (69.3% asserted that CAM knowledge is necessary to be a well-rounded professional. Conclusions This study reveals a high-percentage of pharmacy students who were using or had previously used at least one type of CAM. Students of higher professional years tend to agree that CMs include ideas and methods from which conventional medicine could benefit.

Use of selected complementary and alternative medicine (CAM treatments in veterans with cancer or chronic pain: a cross-sectional survey

Directory of Open Access Journals (Sweden)

Liebschutz Jane M

2006-10-01

Full Text Available Abstract Background Complementary and alternative medicine (CAM is emerging as an important form of care in the United States. We sought to measure the prevalence of selected CAM use among veterans attending oncology and chronic pain clinics and to describe the characteristics of CAM use in this population. Methods The self-administered, mail-in survey included questions on demographics, health beliefs, medical problems and 6 common CAM treatments (herbs, dietary supplements, chiropractic care, massage therapy, acupuncture and homeopathy use. We used the chi-square test to examine bivariate associations between our predictor variables and CAM use. Results Seventy-two patients (27.3% reported CAM use within the past 12 months. CAM use was associated with more education (p = 0.02, higher income (p = 0.006, non-VA insurance (p = 0.003, additional care outside the VA (p = 0.01 and the belief that lifestyle contributes to illness (p = 0.015. The diagnosis of chronic pain versus cancer was not associated with differential CAM use (p = 0.15. Seventy-six percent of CAM non-users reported that they would use it if offered at the VA. Conclusion Use of 6 common CAM treatments among these veterans is lower than among the general population, but still substantial. A large majority of veterans reported interest in using CAM modalities if they were offered at the VA. A national assessment of veteran interest in CAM may assist VA leaders to respond to patients' needs.

Use of selected complementary and alternative medicine (CAM) treatments in veterans with cancer or chronic pain: a cross-sectional survey.

Science.gov (United States)

McEachrane-Gross, F Patricia; Liebschutz, Jane M; Berlowitz, Dan

2006-10-06

Complementary and alternative medicine (CAM) is emerging as an important form of care in the United States. We sought to measure the prevalence of selected CAM use among veterans attending oncology and chronic pain clinics and to describe the characteristics of CAM use in this population. The self-administered, mail-in survey included questions on demographics, health beliefs, medical problems and 6 common CAM treatments (herbs, dietary supplements, chiropractic care, massage therapy, acupuncture and homeopathy) use. We used the chi-square test to examine bivariate associations between our predictor variables and CAM use. Seventy-two patients (27.3%) reported CAM use within the past 12 months. CAM use was associated with more education (p = 0.02), higher income (p = 0.006), non-VA insurance (p = 0.003), additional care outside the VA (p = 0.01) and the belief that lifestyle contributes to illness (p = 0.015). The diagnosis of chronic pain versus cancer was not associated with differential CAM use (p = 0.15). Seventy-six percent of CAM non-users reported that they would use it if offered at the VA. Use of 6 common CAM treatments among these veterans is lower than among the general population, but still substantial. A large majority of veterans reported interest in using CAM modalities if they were offered at the VA. A national assessment of veteran interest in CAM may assist VA leaders to respond to patients' needs.

Ep-CAM expression in squamous cell carcinoma of the esophagus: a potential therapeutic target and prognostic marker

Directory of Open Access Journals (Sweden)

Peiper Matthias

2006-06-01

Full Text Available Abstract Background To evaluate the expression and test the clinical significance of the epithelial cellular adhesion molecule (Ep-CAM in esophageal squamous cell carcinoma (SCC to check the suitability of esophageal SCC patients for Ep-CAM directed targeted therapies. Methods The Ep-CAM expression was immunohistochemically investigated in 70 primary esophageal SCCs using the monoclonal antibody Ber-EP4. For the interpretation of the staining results, we used a standardized scoring system ranging from 0 to 3+. The survival analysis was calculated from 53 patients without distant metastasis, with R0 resection and at least 2 months of clinical follow-up. Results Ep-CAM neo-expression was observed in 79% of the tumors with three expression levels, 1+ (26%, 2+ (11% and 3+ (41%. Heterogeneous expression was observed at all expression levels. Interestingly, tumors with 3+ Ep-CAM expression conferred a significantly decreased median relapse-free survival period (log rank, p = 0.0001 and median overall survival (log rank, p = 0.0003. Multivariate survival analysis disclosed Ep-CAM 3+ expression as independent prognostic factor. Conclusion Our results suggest Ep-CAM as an attractive molecule for targeted therapy in esophageal SCC. Considering the discontenting results of the current adjuvant concepts for esophageal SCC patients, Ep-CAM might provide a promising target for an adjuvant immunotherapeutic intervention.

A Review of CAM for Procedural Pain in Infancy: Part II. Other Interventions

Directory of Open Access Journals (Sweden)

Jennie C. I. Tsao

2008-01-01

Full Text Available This article is the second in a two-part series reviewing the empirical evidence for complementary and alternative medicine (CAM approaches for the management of pain related to medical procedures in infants up to 6 weeks of age. Part I of this series investigated the effects of sucrose with or without non-nutritive sucking (NNS. The present article examines other CAM interventions for procedural pain including music-based interventions, olfactory stimulation, kangaroo care and swaddling. Computerized databases were searched for relevant studies including prior reviews and primary trials. Preliminary support was revealed for the analgesic effects of the CAM modalities reviewed. However, the overall quality of the evidence for these approaches remains relatively weak. Additional well-designed trials incorporating rigorous methodology are required. Such investigations will assist in the development of evidence-based guidelines on the use of CAM interventions either alone or in concert with conventional approaches to provide safe, reliable analgesia for infant procedural pain.

The prevalence, patterns of usage and people's attitude towards complementary and alternative medicine (CAM among the Indian community in Chatsworth, South Africa

Directory of Open Access Journals (Sweden)

Raidoo Deshandra M

2004-02-01

Full Text Available Abstract Background The purpose of this study was to determine, among the Indian community of Chatsworth, South Africa, the prevalence and utilisation patterns of complementary and alternative medicine (CAM, attitudes associated with CAM use and communication patterns of CAM users with their primary care doctors. Methods Face-to-face structured interviews were conducted in Chatsworth, a suburb of Durban in which South Africans of Indian origin predominantly reside. Participants were 200 randomly selected adult English-speaking Indian residents. Results The prevalence of CAM usage for period 2000/2001 was 38.5% (95% confidence interval 31.7% to 45.6%. Spiritual healing and herbal/natural medicines, including vitamins were the most common types of CAM used, accounting for 42.8% and 48.1% respectively of overall CAM usage. People used CAM to treat conditions including diabetes mellitus, headaches, arthritis and joint pains, stress, skin disorders, backaches, hypertension and nasal disorders. Half of the CAM users used allopathic medicines concurrently. The cost of CAM utilization over this 1-year period, incurred by 80.5% of users for the duration of therapy for their most troublesome condition was below R500 (approximately US$50. Age, sex, marital status, religion, level of education and income were shown not to influence the use of CAM. Greater than half (51.9% of CAM users did so either upon the advice of someone they knew, or after noticing a CAM advertisement in the local press. Seventy-nine percent of CAM users indicated that they had positive outcomes with their treatments. Fifty four percent of CAM users (excluding those using spiritual healing only failed to inform their doctors that they used CAM. The main reason given by half of this group was that informing their doctors did not seem necessary. Conclusion The prevalence of CAM in Chatsworth is similar to findings in other parts of the world. Although CAM was used to treat many different

Two-body wear rate of CAD/CAM resin blocks and their enamel antagonists.

Science.gov (United States)

Stawarczyk, Bogna; Özcan, Mutlu; Trottmann, Albert; Schmutz, Felix; Roos, Malgorzata; Hämmerle, Christoph

2013-05-01

Computer-aided design and computer-aided manufacturing (CAD/CAM) resins exhibit good mechanical properties and can be used as long-term restorations. The wear rate of such resins and their enamel antagonists is unknown. The purpose of this study was to test and compare the 2-body wear rate of CAD/CAM resin blocks. Wear specimens (N=42, n=6) were made from 5 CAD/CAM resins: ZENO PMMA (ZP), artBloc Temp (AT), Telio CAD (TC), Blanc High-class (HC), CAD-Temp (CT); 1 manually polymerized resin: Integral esthetic press (negative control group, IEP); and 1 glass-ceramic: VITA Mark II (positive control group, VM2). The specimens for the wear resistance were aged in a thermomechanical loading machine (49 N, 1.67 Hz, 5/50°C) with human enamel antagonists. The material loss of all specimens before, during, and after aging was evaluated with a 3DS profilometer. The measured material loss data of all tested groups were statistically evaluated with linear mixed model analysis (a=.05). Manually polymerized resin showed significantly higher material wear (P<.001) than all other tested groups. Glass-ceramic showed significantly lower wear values (P<.001) than CAD/CAM resins ZP, AT, HC, CT, and IES. CAD/CAM resin TC was not significantly different from the positive control group. Glass-ceramic showed the highest enamel wear values (P<.001) of all tested resins. No differences were found in the enamel wear among all resins. The glass-ceramic group showed damage in the form of cracks on the worn enamel surface in 50% of specimens. CAD/CAM resins showed lower wear rates than those conventionally polymerized. Only one CAD/CAM resin, TC, presented material wear values comparable with glass-ceramic. The tested glass-ceramic developed cracks in the enamel antagonist and showed the highest enamel wear values of all other tested groups. Copyright © 2013 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

From Artisanal to CAD-CAM Blocks: State of the Art of Indirect Composites.

Science.gov (United States)

Mainjot, A K; Dupont, N M; Oudkerk, J C; Dewael, T Y; Sadoun, M J

2016-05-01

Indirect composites have been undergoing an impressive evolution over the last few years. Specifically, recent developments in computer-aided design-computer-aided manufacturing (CAD-CAM) blocks have been associated with new polymerization modes, innovative microstructures, and different compositions. All these recent breakthroughs have introduced important gaps among the properties of the different materials. This critical state-of-the-art review analyzes the strengths and weaknesses of the different varieties of CAD-CAM composite materials, especially as compared with direct and artisanal indirect composites. Indeed, new polymerization modes used for CAD-CAM blocks-especially high temperature (HT) and, most of all, high temperature-high pressure (HT-HP)-are shown to significantly increase the degree of conversion in comparison with light-cured composites. Industrial processes also allow for the augmentation of the filler content and for the realization of more homogeneous structures with fewer flaws. In addition, due to their increased degree of conversion and their different monomer composition, some CAD-CAM blocks are more advantageous in terms of toxicity and monomer release. Finally, materials with a polymer-infiltrated ceramic network (PICN) microstructure exhibit higher flexural strength and a more favorable elasticity modulus than materials with a dispersed filler microstructure. Consequently, some high-performance composite CAD-CAM blocks-particularly experimental PICNs-can now rival glass-ceramics, such as lithium-disilicate glass-ceramics, for use as bonded partial restorations and crowns on natural teeth and implants. Being able to be manufactured in very low thicknesses, they offer the possibility of developing innovative minimally invasive treatment strategies, such as "no prep" treatment of worn dentition. Current issues are related to the study of bonding and wear properties of the different varieties of CAD-CAM composites. There is also a crucial

77 FR 6536 - Approval for Manufacturing Authority; Foreign-Trade Zone 177; Best Chair, Inc., d/b/a Best Home...

Science.gov (United States)

2012-02-08

... manufacturing authority on behalf of Best Chair, Inc., d/ b/a Best Home Furnishings, Inc., within FTZ 177 in... application for manufacturing authority under zone procedures within FTZ 177 on behalf of Best Chair, Inc., d... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Order No. 1807] Approval for Manufacturing...

GammaCam trademark radiation imaging system

International Nuclear Information System (INIS)

1998-02-01

GammaCam trademark, a gamma-ray imaging system manufactured by AIL System, Inc., would benefit a site that needs to locate radiation sources. It is capable of producing a two-dimensional image of a radiation field superimposed on a black and white visual image. Because the system can be positioned outside the radiologically controlled area, the radiation exposure to personnel is significantly reduced and extensive shielding is not required. This report covers the following topics: technology description; performance; technology applicability and alternatives; cost; regulatory and policy issues; and lessons learned. The demonstration of GammaCam trademark in December 1996 was part of the Large-Scale Demonstration Project (LSDP) whose objective is to select and demonstrate potentially beneficial technologies at the Argonne National Laboratory-East (ANL) Chicago Pile-5 Research Reactor (CP-5). The purpose of the LSDP is to demonstrate that by using innovative and improved decontamination and decommissioning (D and D) technologies from various sources, significant benefits can be achieved when compared to baseline D and D technologies

Comparative evaluation of RetCam vs. gonioscopy images in congenital glaucoma

OpenAIRE

Azad, Raj V; Chandra, Parijat; Chandra, Anuradha; Gupta, Aparna; Gupta, Viney; Sihota, Ramanjit

2014-01-01

Purpose: To compare clarity, exposure and quality of anterior chamber angle visualization in congenital glaucoma patients, using RetCam and indirect gonioscopy images. Design: Cross-sectional study Participants. Congenital glaucoma patients over age of 5 years. Materials and Methods: A prospective consecutive pilot study was done in congenital glaucoma patients who were older than 5 years. Methods used are indirect gonioscopy and RetCam imaging. Clarity of the image, extent of angle visible a...

Lyapunov-based constrained engine torque control using electronic throttle and variable cam timing

NARCIS (Netherlands)

Feru, E.; Lazar, M.; Gielen, R.H.; Kolmanovsky, I.V.; Di Cairano, S.

2012-01-01

In this paper, predictive control of a spark ignition engine equipped with an electronic throttle and a variable cam timing actuator is considered. The objective is to adjust the throttle angle and the engine cam timing in order to reduce the exhaust gas emissions while maintaining fast and

Modified FlowCAM procedure for quantifying size distribution of zooplankton with sample recycling capacity.

Directory of Open Access Journals (Sweden)

Esther Wong

Full Text Available We have developed a modified FlowCAM procedure for efficiently quantifying the size distribution of zooplankton. The modified method offers the following new features: 1 prevents animals from settling and clogging with constant bubbling in the sample container; 2 prevents damage to sample animals and facilitates recycling by replacing the built-in peristaltic pump with an external syringe pump, in order to generate negative pressure, creates a steady flow by drawing air from the receiving conical flask (i.e. vacuum pump, and transfers plankton from the sample container toward the main flowcell of the imaging system and finally into the receiving flask; 3 aligns samples in advance of imaging and prevents clogging with an additional flowcell placed ahead of the main flowcell. These modifications were designed to overcome the difficulties applying the standard FlowCAM procedure to studies where the number of individuals per sample is small, and since the FlowCAM can only image a subset of a sample. Our effective recycling procedure allows users to pass the same sample through the FlowCAM many times (i.e. bootstrapping the sample in order to generate a good size distribution. Although more advanced FlowCAM models are equipped with syringe pump and Field of View (FOV flowcells which can image all particles passing through the flow field; we note that these advanced setups are very expensive, offer limited syringe and flowcell sizes, and do not guarantee recycling. In contrast, our modifications are inexpensive and flexible. Finally, we compared the biovolumes estimated by automated FlowCAM image analysis versus conventional manual measurements, and found that the size of an individual zooplankter can be estimated by the FlowCAM image system after ground truthing.

Information management and complementary alternative medicine: the anatomy of information about CAMs through PubMed.

Science.gov (United States)

Corrao, Salvatore; Argano, Christiano; Colomba, Daniela; Ippolito, Calogero; Gargano, Vincenzo; Arcoraci, Vincenzo; Licata, Giuseppe

2013-10-01

In recent years, there has been a growing interest about complementary and alternative medicine (CAM), and the use of CAM interventions has become more common among people. For these reasons, health professionals must be able to effectively manage information in this field of knowledge according to an evidence-based point of view. This study assessed the anatomy of the available information about CAMs using PubMed, to give practical instructions to manage information in this field. We also analyzed the anatomy of information according to each alternative medicine branch, narrow and broad search methods, subset filters for indexed-for-Medline and non-indexed citations, and different publication types including randomized controlled trials (RCTs) and meta-analyses. Our results demonstrated that the use of CAMs subset (supplied by PubMed search engine) leads to a great number of citations determining an information overload. Our data reveal that it would be more useful to search for the CAM separately, identifying specific items and study design. Moreover, we found the largest number of randomized clinical trials and meta-analyses related to herbal medicine and acupuncture, neither RCTs nor meta-analyses were available for bach and flower remedies, auriculoacupuncture, iridology, and pranotherapy. For the first time, our study gives a comprehensive view of the anatomy of information regarding CAMs and each branch of them. We suggest a methodological approach to face with searching information about this emerging issue from an evidence-based point of view. Finally, our data pointed out some "grey zones" since neither RCTs nor meta-analyses were available for some CAMs.

Calibrating the ChemCam LIBS for Carbonate Minerals on Mars

Science.gov (United States)

Wiens, Roger C.; Clegg, Samuel M.; Ollila, Ann M.; Barefield, James E.; Lanza, Nina; Newsom, Horton E.

2009-01-01

The ChemCam instrument suite on board the NASA Mars Science Laboratory (MSL) rover includes the first LIBS instrument for extraterrestrial applications. Here we examine carbonate minerals in a simulated martian environment using the LIDS technique in order to better understand the in situ signature of these materials on Mars. Both chemical composition and rock type are determined using multivariate analysis (MVA) techniques. Composition is confirmed using scanning electron microscopy (SEM) techniques. Our initial results suggest that ChemCam can recognize and differentiate between carbonate materials on Mars.

Ėtude sur l’alimentation du poulet de chaire à base du maïs Zenata et Ain kebira

OpenAIRE

KENZI, MOHAMMED ZAKARYA; WAHAJ, MOHAMMED

2016-01-01

Résume L’aliment représente 70% du cout de production dans l’élevage de poulet de chair, il est donc important d’accorder une attention particulière à ce paramètre. Ce dernier est le premier poste intervenant dans le prix de revient du poulet de chair. La supplémentation de l’aliment du poulet en 2 5% de maïs durant le démarrage et croissance permet aussi de réduire le cout d’élevage et d’améliorer le poids a l’abattage. Study chair of chicken feed made of corn Summ...

Can a smart chair improve the sitting behavior of office workers?

NARCIS (Netherlands)

Hodselmans, Audy Paul; Roossien, Charissa; Stegenga, Jan; Spook, SM; Brouwer, Sandra; Verkerke, Bart; Reneman, Michiel

2017-01-01

a b s t r a c t Prolonged sitting can cause health problems and musculoskeletal discomfort. There is a need for objective and non-obstructive means of measuring sitting behavior. A ‘smart’ office chair can monitor sitting behavior and provide tactile feedback, aiming to improve sitting behavior.

A roadmap for research on crassulacean acid metabolism (CAM) to enhance sustainable food and bioenergy production in a hotter, drier world.

Science.gov (United States)

Yang, Xiaohan; Cushman, John C; Borland, Anne M; Edwards, Erika J; Wullschleger, Stan D; Tuskan, Gerald A; Owen, Nick A; Griffiths, Howard; Smith, J Andrew C; De Paoli, Henrique C; Weston, David J; Cottingham, Robert; Hartwell, James; Davis, Sarah C; Silvera, Katia; Ming, Ray; Schlauch, Karen; Abraham, Paul; Stewart, J Ryan; Guo, Hao-Bo; Albion, Rebecca; Ha, Jungmin; Lim, Sung Don; Wone, Bernard W M; Yim, Won Cheol; Garcia, Travis; Mayer, Jesse A; Petereit, Juli; Nair, Sujithkumar S; Casey, Erin; Hettich, Robert L; Ceusters, Johan; Ranjan, Priya; Palla, Kaitlin J; Yin, Hengfu; Reyes-García, Casandra; Andrade, José Luis; Freschi, Luciano; Beltrán, Juan D; Dever, Louisa V; Boxall, Susanna F; Waller, Jade; Davies, Jack; Bupphada, Phaitun; Kadu, Nirja; Winter, Klaus; Sage, Rowan F; Aguilar, Cristobal N; Schmutz, Jeremy; Jenkins, Jerry; Holtum, Joseph A M

2015-08-01

Crassulacean acid metabolism (CAM) is a specialized mode of photosynthesis that features nocturnal CO2 uptake, facilitates increased water-use efficiency (WUE), and enables CAM plants to inhabit water-limited environments such as semi-arid deserts or seasonally dry forests. Human population growth and global climate change now present challenges for agricultural production systems to increase food, feed, forage, fiber, and fuel production. One approach to meet these challenges is to increase reliance on CAM crops, such as Agave and Opuntia, for biomass production on semi-arid, abandoned, marginal, or degraded agricultural lands. Major research efforts are now underway to assess the productivity of CAM crop species and to harness the WUE of CAM by engineering this pathway into existing food, feed, and bioenergy crops. An improved understanding of CAM has potential for high returns on research investment. To exploit the potential of CAM crops and CAM bioengineering, it will be necessary to elucidate the evolution, genomic features, and regulatory mechanisms of CAM. Field trials and predictive models will be required to assess the productivity of CAM crops, while new synthetic biology approaches need to be developed for CAM engineering. Infrastructure will be needed for CAM model systems, field trials, mutant collections, and data management. © 2015 ORNL/UT-Battelle New Phytologist © 2015 New Phytologist Trust.

DYNAMIC ANALYSIS OF A CRIMPING DEVICE WITH MULTIPLE CAMS USING MSC ADAMS II

Directory of Open Access Journals (Sweden)

Gheorghe Popescu

2012-05-01

Full Text Available Through the present paper, the author presents the results of the dynamic analysis with MSC ADAMS of the mechanism with a crimping device with 12 tightening cams, designed and used in the technological process of assembly of the indigenous electrical detonators. In this sense, the mechanism with multiple cams is considered a mechanical system and is treated as an assembly of rigid bodies connected by mechanical connections and elastic elements. For shaping and simulation of the mechanism with multiple cams using ADAMS program, the author got through the following stages: construction of the pattern, its testing and simulation, validation, finishing, parametrization, optimization of the pattern.

Qualitative Assessment of Academic Radiation Oncology Department Chairs' Insights on Diversity, Equity, and Inclusion: Progress, Challenges, and Future Aspirations.

Science.gov (United States)

Jones, Rochelle D; Chapman, Christina H; Holliday, Emma B; Lalani, Nafisha; Wilson, Emily; Bonner, James A; Movsas, Benjamin; Kalnicki, Shalom; Formenti, Silvia C; Thomas, Charles R; Hahn, Stephen M; Liu, Fei-Fei; Jagsi, Reshma

2018-05-01

A lack of diversity has been observed in radiation oncology (RO), with women and certain racial/ethnic groups underrepresented as trainees, faculty, and practicing physicians. We sought to gain a nuanced understanding of how to best promote diversity, equity, and inclusion (DEI) based on the insights of RO department chairs, with particular attention given to the experiences of the few women and underrepresented minorities (URMs) in these influential positions. From March to June 2016, we conducted telephone interviews with 24 RO department chairs (of 27 invited). Purposive sampling was used to invite all chairs who were women (n = 13) or URMs (n = 3) and 11 male chairs who were not URMs. Multiple analysts coded the verbatim transcripts. Five themes were identified: (1) commitment to DEI promotes quality health care and innovation; (2) gaps remain despite some progress with promoting diversity in RO; (3) women and URM faculty continue to experience challenges in various career domains; (4) solutions to DEI issues would be facilitated by acknowledging realities of gender and race; and (5) expansion of the career pipeline is needed. The chairs' insights had policy-relevant implications. Bias training should broach tokenism, blindness, and intersectionality. Efforts to recruit and support diverse talent should be deliberate and proactive. Bridge programs could engage students before their application to medical school. Copyright © 2018 Elsevier Inc. All rights reserved.

Psychological and behavioral mechanisms influencing the use of complementary and alternative medicine (CAM) in cancer patients.

Science.gov (United States)

Hirai, K; Komura, K; Tokoro, A; Kuromaru, T; Ohshima, A; Ito, T; Sumiyoshi, Y; Hyodo, I

2008-01-01

This study explored the psychological and behavioral mechanisms of complementary and alternative medicine (CAM) use in Japanese cancer patients using two applied behavioral models, the transtheoretical model (TTM), and theory of planned behavior (TPB). Questionnaires were distributed to 1100 patients at three cancer treatment facilities in Japan and data on 521 cancer patients were used in the final analysis. The questionnaire included items based on TTM and TPB variables, as well as three psychological batteries. According to the TTM, 88 patients (17%) were in precontemplation, 226 (43%) in contemplation, 33 (6%) in preparation, 71 (14%) in action, and 103 (20%) in maintenance. The model derived from structural equation modeling revealed that the stage of CAM use was significantly affected by the pros, cons, expectation from family, norms of medical staff, use of chemotherapy, period from diagnosis, and place of treatment. The primary factor for the stage of CAM use was the expectation from family. The findings revealed the existence of a number of psychologically induced potential CAM users, and psychological variables including positive attitude for CAM use and perceived family expectation greatly influence CAM use in cancer patients.

Moving chairs in Starbucks: Observational studies find rice-wheat cultural differences in daily life in China.

Science.gov (United States)

Talhelm, Thomas; Zhang, Xuemin; Oishi, Shigehiro

2018-04-01

Traditional paddy rice farmers had to share labor and coordinate irrigation in a way that most wheat farmers did not. We observed people in everyday life to test whether these agricultural legacies gave rice-farming southern China a more interdependent culture and wheat-farming northern China a more independent culture. In Study 1, we counted 8964 people sitting in cafes in six cities and found that people in northern China were more likely to be sitting alone. In Study 2, we moved chairs together in Starbucks across the country so that they were partially blocking the aisle ( n = 678). People in northern China were more likely to move the chair out of the way, which is consistent with findings that people in individualistic cultures are more likely to try to control the environment. People in southern China were more likely to adjust the self to the environment by squeezing through the chairs. Even in China's most modern cities, rice-wheat differences live on in everyday life.

CAM, free speech, and the British legal system: overstepping the mark?

Science.gov (United States)

Milgrom, Lionel R

2009-10-01

The British Chiropractic Association recently won a libel case against the science writer and CAM 'skeptic' Dr Simon Singh for publishing an article in a British newspaper in which he accused them of promoting 'bogus' treatments. This has ignited a campaign in the UK to 'keep the libel laws out of science'. In this article, the tension between media freedom of expression and defamation law is examined, and possible ramifications for CAM in the UK explored.

AffectCam : arousal- augmented sensecam for richer recall of episodic memories

OpenAIRE

Sas, Corina; Fratczak, Thomasz; Rees, Matthew; Gellersen, Hans; Kalnikaitė, Vaiva; Coman, Alina; Höök, Kristina

2013-01-01

This paper describes the design and evaluation of AffectCam, a wearable system integrating SenseCam and BodyMedia SenseWear for capturing galvanic skin response as a measure of bodily arousal. AffectCam’s algorithms use arousal as a filtering mechanism for selecting the most personally relevant photos captured during people’s ordinary daily life, i.e. high arousal photos. We discuss initial findings showing that emotional arousal does improve the quality of memory recall associated with emoti...

Color change of CAD-CAM materials and composite resin cements after thermocycling.

Science.gov (United States)

Gürdal, Isil; Atay, Ayse; Eichberger, Marlis; Cal, Ebru; Üsümez, Aslihan; Stawarczyk, Bogna

2018-04-24

The color of resin cements and computer-aided-design and computer-aided-manufacturing (CAD-CAM) restorations may change with aging. The purpose of this in vitro study was to analyze the influence of thermocycling on the color of CAD-CAM materials with underlying resin cement. Seven different CAD-CAM materials, composite resins and glass-ceramics were cut into 0.7-mm and 1.2-mm thicknesses (n=10) and cemented with a dual-polymerizing resin cement, a light-polymerizing resin cement, and a preheated composite resin (N=420). Color values were measured by using spectrophotometry. Specimens were subjected to thermocycling (5°C and 55°C; 5000 cycles). The measured color difference (ΔE) data were analyzed by using descriptive statistics. Normality of data distribution was tested by using the Kolmogorov-Smirnov test. Three-way and 1-way ANOVA followed by the Scheffé post-hoc test and unpaired 2-sample Student t test were computed to determine the significant differences among the tested parameters (α=.05). ΔE values were significantly influenced by the CAD-CAM material (η p 2 =0.85, Pcement (η P 2 =0.03, P=.003) but were not influenced by thickness (P=.179). Significant interactions were present among thickness, cement, and CAD-CAM materials (Pcement showed significantly lower ΔE values than the preheated composite resin (P=.003). Restoration materials and composite resin cement types used for cementation influence the amount of color change due to aging. Copyright © 2018 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Multi-functional fitness chair for light weight trainer

OpenAIRE

Fan, Rong; Wu, Peng

2016-01-01

Nowadays, physical inactivity has become a global problem. According to the research, about 5.3 million deaths all over the world in 2008 could be attributed to inactivity [1]. However, it is enough to do a little exercise every day to reduce the risk of premature deaths by as much as 30 percent. Due to the increasing working pressure, people do not have enough time to go to gym and do exercises, which means that the design of multi-functional fitness chair is necessary so that people can do ...

DOE Chair of Excellence in Environmental Disciplines-Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Kurunganty, Sastry; Loran, Roberto; Roque-Malherbe, Rolando; Hijazi, Yazan; Nieto, Santander; Gomez, Will A.; Duconge, Jose; Cotto, María del C.; Muniz, Carlos; Diaz, Francisco J.; Neira, Carlos F.; Marquez, Francisco; Del Valle, W.; Thommes, M.

2014-02-19

The report Massie Chair of Excellence Program at Universidad del Turabo, contract DE-FG02-95EW12610, during the period of 9/29/1995 to 9/29/2011. The initial program aims included development of academic programs in the Environmental Sciences and Engineering, and Research and Development focused initially on environmentally friendly processes and later revised also include: renewable energy and international cooperation. From 1995 -2005, the Program at UT lead the establishment of the new undergraduate program in electrical engineering at the School of Engineering (SoE), worked on requirements to achieve ABET accreditation of the SoE B.S. Mechanical Engineering and B.S. Electrical Engineering programs, mentored junior faculty, taught undergraduate courses in electrical engineering, and revised the electrical engineering curriculum. Engineering undergraduate laboratories were designed and developed. The following research sub-project was developed: Research and development of new perovskite-alumina hydrogen permeable asymmetrical nanostructured membranes for hydrogen purification, and extremely high specific surface area silica materials for hydrogen storage in the form of ammonia, Dr. Rolando Roque-Malherbe Subproject PI, Dr. Santander Nieto and Mr. Will Gómez Research Assistants. In 2006, the Massie Chair of Excellence Program was transferred to the National Nuclear Security Agency, NNSA and DNN. DoE required a revised proposal aligned with the priorities of the Administration. The revised approved program aims included: (1) Research (2) Student Development: promote the development of minority undergraduate and graduate students through research teams, internships, conferences, new courses; and, (3) Support: (a) Research administration and (b) Dissemination through international conferences, the UT Distinguished Lecturer Series in STEM fields and at the annual Universidad del Turabo (UT) Researchers Conference. Research included: Sub-Project 1: Synthesis and

In Vivo Spinal Posture during Upright and Reclined Sitting in an Office Chair

Directory of Open Access Journals (Sweden)

Roland Zemp

2013-01-01

Full Text Available Increasing numbers of people spend the majority of their working lives seated in an office chair. Musculoskeletal disorders, in particular low back pain, resulting from prolonged static sitting are ubiquitous, but regularly changing sitting position throughout the day is thought to reduce back problems. Nearly all currently available office chairs offer the possibility to alter the backrest reclination angles, but the influence of changing seating positions on the spinal column remains unknown. In an attempt to better understand the potential to adjust or correct spine posture using adjustable seating, five healthy subjects were analysed in an upright and reclined sitting position conducted in an open, upright MRI scanner. The shape of the spine, as described using the vertebral bodies’ coordinates, wedge angles, and curvature angles, showed high inter-subject variability between the two seating positions. The mean lumbar, thoracic, and cervical curvature angles were 29±15°, -29±4°, and 13±8° for the upright and 33±12°, -31±7°, and 7±7° for the reclined sitting positions. Thus, a wide range of seating adaptation is possible through modification of chair posture, and dynamic seating options may therefore provide a key feature in reducing or even preventing back pain caused by prolonged static sitting.

Use of complementary and alternative medicine (CAM) by parents in their children and adolescents with epilepsy - Prevelance, predictors and parents' assessment.

Science.gov (United States)

Hartmann, Nicole; Neininger, Martina P; Bernhard, Matthias K; Syrbe, Steffen; Nickel, Petra; Merkenschlager, Andreas; Kiess, Wieland; Bertsche, Thilo; Bertsche, Astrid

2016-01-01

The use of complementary and alternative medicine (CAM) is popular. Parents of children suffering from epilepsy may also consider administering CAM to their children. Systematic data about frequency of and motivations for CAM use, however, are scarce. In a university hospital's neuropaediatric department parents of patients aged 0-18 years suffering from epilepsy were consecutively invited to take part in a structured interview during 4 months in 2014. Of the invited parents, 164/165 (99%) agreed to participate. From those, 21/164 (13%) stated that they used CAM in their child. The highest independent predictive value of CAM use was the occurrence of adverse drug events (ADE) of anticonvulsants as judged by parents. Patients affected by ADE had a 5.6 higher chance of receiving CAM compared to patients without ADE. Most commonly used were homeopathy (14/21, 67%) and osteopathy (12/21, 57%). The internet was the most frequently used source of information (14/21, 67%). Of the parents, 10/21 (48%) described positive effects of CAM on seizure frequency, 12/21 (57%) on general condition of their child, and 20/21 (95%) wished to continue CAM for epilepsy therapy. From the non-users of CAM, 91/143 (66%) expressed the desire to learn more about CAM for epilepsy therapy. Our study was performed in a university hospital in a large urban city in Eastern Germany. CAM user rates can differ in other parts of Germany and Europe, in other institutions and for chronic diseases other than epilepsy. The main reason for CAM use was the occurrence of ADE of anticonvulsants. More than half of the parents saw a benefit of CAM for their children. Almost all parents wished to continue CAM use, even those who did not see concrete positive effects. Copyright © 2015 European Paediatric Neurology Society. Published by Elsevier Ltd. All rights reserved.

Chairside CAD/CAM materials. Part 2: Flexural strength testing.

Science.gov (United States)

Wendler, Michael; Belli, Renan; Petschelt, Anselm; Mevec, Daniel; Harrer, Walter; Lube, Tanja; Danzer, Robert; Lohbauer, Ulrich

2017-01-01

Strength is one of the preferred parameters used in dentistry for determining clinical indication of dental restoratives. However, small dimensions of CAD/CAM blocks limit reliable measurements with standardized uniaxial bending tests. The objective of this study was to introduce the ball-on-three-ball (B3B) biaxial strength test for dental for small CAD/CAM block in the context of the size effect on strength predicted by the Weibull theory. Eight representative chairside CAD/CAM materials ranging from polycrystalline zirconia (e.max ZirCAD, Ivoclar-Vivadent), reinforced glasses (Vitablocs Mark II, VITA; Empress CAD, Ivoclar-Vivadent) and glass-ceramics (e.max CAD, Ivoclar-Vivadent; Suprinity, VITA; Celtra Duo, Dentsply) to hybrid materials (Enamic, VITA; Lava Ultimate, 3M ESPE) have been selected. Specimens were prepared with highly polished surfaces in rectangular plate (12×12×1.2mm 3 ) or round disc (Ø=12mm, thickness=1.2mm) geometries. Specimens were tested using the B3B assembly and the biaxial strength was determined using calculations derived from finite element analyses of the respective stress fields. Size effects on strength were determined based on results from 4-point-bending specimens. A good agreement was found between the biaxial strength results for the different geometries (plates vs. discs) using the B3B test. Strength values ranged from 110.9MPa (Vitablocs Mark II) to 1303.21MPa (e.max ZirCAD). The strength dependency on specimen size was demonstrated through the calculated effective volume/surface. The B3B test has shown to be a reliable and simple method for determining the biaxial strength restorative materials supplied as small CAD/CAM blocks. A flexible solution was made available for the B3B test in the rectangular plate geometry. Copyright © 2016 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Carbon and prospective: international colloquium jointly organized by the prospective modeling chair and ETSAP

International Nuclear Information System (INIS)

Maizi, N.; Hourcade, J.Ch.; Selosse, S.

2009-01-01

The inauguration of the prospective modeling chair in favour of sustainable development is the result of the joint effort of several schools, organizations and companies, in particular: Mines ParisTech, Ponts ParisTech, Agro ParisTech, the higher education and research pole of ParisTech, the Ecole des Ponts foundation, the mineral, mining and metallurgic industries foundation (FI3M), with the partnership of Ademe, EdF, Renault, Schneider Electric and Total. The main goal of this chair is to perpetuate modeling tools with sustainable development stakes. The scientific program and the expertise of this chair are based on the joint and complementary experience of its two co-founder research teams in the domain of long-term prospective of energy, economy and environment-related questions: the applied mathematics centre (CMA - Mines ParisTech) and the international centre of environment and sustainable development research (CIRED). An inaugural colloquium was organized at the occasion of the launching of this chair. During round tables, representatives of the different intervening parties explained the stakes of this huge project and their expectations, in particular from the scientific, economical and societal point of view. A workshop on the topic 'carbon and prospective' followed the round tables. Six presentations were given about the following topics: energy policy scenarios for 2050 (Moncomble, J.E.), the shadow price of carbon (Chambolle T.), mitigation targets and carbon values: insights from TIMES-FR (Assoumou E.), climate protection and infrastructures (Sassi O.), China's energy and carbon options (Wenying C.), EU 20-20 policy implications on the energy system of Germany - an analysis with TIMES PanEU (Blesl M.). This book gathers the proceedings of both parts of this colloquium, the debates during the round tables (in French) and the presentations given during the workshop (in English). (J.S.)

Dental calculus detection using the VistaCam.

Science.gov (United States)

Shakibaie, Fardad; Walsh, Laurence J

2016-12-01

The VistaCam® intra-oral camera system (Dürr Dental, Bietigheim-Bissingen, Germany) is a fluorescence system using light emitting diodes that produce a 405-nm violet light. This wavelength has potential application for detection of dental calculus based on red emissions from porphyrin molecules. This study assessed the digital scores obtained for both supragingival and subgingival calculus on 60 extracted teeth and compared these with lesions of dental caries. It has also examined the effect of saliva and blood on the fluorescence readings for dental calculus. VistaCam fluorescence scores for both supragingival (1.7-3.3) and subgingival calculus (1.3-2.4) were higher than those for sound root surfaces (0.9-1.1) and dental caries (0.9-2.2) ( p  calculus samples were not affected by the presence of saliva or blood. These results suggest that the use of violet light fluorescence could be a possible adjunct to clinical examination for deposits of dental calculus.

Efficacy, tolerability, and safety of non-pharmacological therapies for chronic pain: An umbrella review on various CAM approaches.

Science.gov (United States)

Houzé, Bérengère; El-Khatib, Héjar; Arbour, Caroline

2017-10-03

Complementary and alternative medicine (CAM) therapies may be used as a non-pharmacological approach to chronic pain management. While hundreds of trials about individual CAM modality have been conducted, a comprehensive overview of their results is currently lacking for pain clinicians and researchers. This umbrella review synthesized the quality of meta-analytic evidence supporting the efficacy, tolerability and safety of CAM therapies for the management of chronic pain. MEDLINE, EMBASE, CINAHL, and CENTRAL were searched from October 1991 to November 2016. Reviews of clinical trials (randomized and non-randomized) with meta-analysis investigating the utility of any CAM modality for chronic pain were eligible. Pain relief post-intervention was the main outcome and secondary outcomes included patients' adherence and incidence of adverse effects during CAM protocol. Twenty-six reviews (207 clinical trials, >12,000 participants) about 18 CAM modalities, falling under natural products, mind and body practices or other complementary health approaches were included. Inhaled cannabis, graded motor imagery, and Compound Kushen injection (a form of Chinese medicine) were found the most efficient (with moderate-to-high effect sizes and low heterogeneity) and tolerable (≥80% of adherence to study protocols) for chronic pain relief. When reported, adverse effects related to these CAM were minor. Although several CAM were found effective for chronic pain relief, it remains unclear when these modalities are a reasonable choice against or in conjunction with mainstream treatments. In that sense, future research with a clear emphasis on concurrent evaluation of CAM overall efficacy and patient adherence/tolerance is needed. Copyright © 2017 Elsevier Inc. All rights reserved.

Multidisciplinary approach to converting power chair into motorized prone cart.

Science.gov (United States)

Brose, Steven W; Wali, Eisha

2014-01-01

Pressure ulcers remain a major source of morbidity and mortality in veterans with neurologic impairment. Management of pressure ulcers typically involves pressure relief over skin regions containing wounds, but this can lead to loss of mobility and independence when the wounds are located in regions that receive pressure from sitting. An innovative, low-cost, multidisciplinary effort was undertaken to maximize quality of life in a veteran with a thoracic-4 level complete spinal cord injury and a stage 4 ischial wound. The person's power wheelchair was converted into a motorized prone cart, allowing navigation of the Department of Veterans Affairs spinal cord injury hospital ward and improved socialization while relieving pressure on the wound. Physical and occupational therapy assisted with the reconfiguration of the power chair and verified safe transfers into the chair and driving of the device. Psychology verified positive psychosocial benefit, while nursing and physician services verified an absence of unwanted pain or skin injury resulting from use of the device. Further investigation of ways to apply this technique is warranted to improve the quality of life of persons with pressure ulcers.

CAM and Cell Fate Targeting: Molecular and Energetic Insights into Cell Growth and Differentiation

Directory of Open Access Journals (Sweden)

Carlo Ventura

2005-01-01

Full Text Available Evidence-based medicine is switching from the analysis of single diseases at a time toward an integrated assessment of a diseased person. Complementary and alternative medicine (CAM offers multiple holistic approaches, including osteopathy, homeopathy, chiropractic, acupuncture, herbal and energy medicine and meditation, all potentially impacting on major human diseases. It is now becoming evident that acupuncture can modify the expression of different endorphin genes and the expression of genes encoding for crucial transcription factors in cellular homeostasis. Extremely low frequency magnetic fields have been found to prime the commitment to a myocardial lineage in mouse embryonic stem cells, suggesting that magnetic energy may direct stem cell differentiation into specific cellular phenotypes without the aid of gene transfer technologies. This finding may pave the way to novel approaches in tissue engineering and regeneration. Different ginseng extracts have been shown to modulate growth and differentiation in pluripotent cells and to exert wound-healing and antitumor effects through opposing activities on the vascular system, prompting the hypothesis that ancient compounds may be the target for new logics in cell therapy. These observations and the subtle entanglement among different CAM systems suggest that CAM modalities may deeply affect both the signaling and transcriptional level of cellular homeostasis. Such a perception holds promises for a new era in CAM, prompting reproducible documentation of biological responses to CAM-related strategies and compounds. To this end, functional genomics and proteomics and the comprehension of the cell signaling networks may substantially contribute to the development of a molecular evidence–based CAM.

The use of CAM and conventional treatments among primary care consulters with chronic musculoskeletal pain

OpenAIRE

Lewis Martyn; Croft Peter; Artus Majid

2007-01-01

Abstract Background Chronic musculoskeletal pain is the single most cited reason for use of complementary and alternative medicine (CAM). Primary care is the most frequent conventional medical service used by patients with pain in the UK. We are unaware, however, of a direct evidence of the extent of CAM use by primary care patients, and how successful they perceive it to be. Methods Aims and objectives To determine CAM use among patients with chronic musculoskeletal pain who have consulted a...

Decisions to use complementary and alternative medicine (CAM) by male cancer patients: information-seeking roles and types of evidence used

Science.gov (United States)

Evans, Maggie; Shaw, Alison; Thompson, Elizabeth A; Falk, Stephen; Turton, Pat; Thompson, Trevor; Sharp, Deborah

2007-01-01

Background Complementary and Alternative Medicine (CAM) is increasingly popular with cancer patients and yet information provision or discussion about CAM by health professionals remains low. Previous research suggests that patients may fear clinicians' 'disapproval' if they raise the subject of CAM, and turn to other sources to acquire information about CAM. However, little empirical research has been conducted into how cancer patients acquire, and, more importantly evaluate CAM information before deciding which CAM therapies to try. Methods Qualitative study, comprising semi-structured interviews with 43 male cancer patients of varying ages, cancer type and stage of illness, 34 of whom had used CAM. They were recruited from a range of NHS and non-NHS settings in Bristol, England. Results As a result of the lack of CAM information from health professionals, men in this study became either 'pro-active seekers' or 'passive recipients' of such information. Their main information resource was the 'lay referral' network of family, friends and acquaintances, especially females. 'Traditional' information sources, including books, magazines, leaflets and the media were popular, more so in fact than the internet. Views on the internet ranged from enthusiasm or healthy scepticism through to caution or disinterest. CAM information was generally regarded as 'empowering' as it broadened treatment and self-care options. A minority of participants were information averse fearing additional choices that might disrupt their fragile ability to cope. There was general consensus that CAM information should be available via the NHS, to give it a 'stamp of approval', which combined with guidance from informed health professionals, could help patients to make 'guided' choices. However, a small minority of these men valued the independence of CAM from the NHS and deliberately sought 'alternative' information sources and treatment options. Men were selective in identifying particular

Does complementary and alternative medicine (CAM) use reduce negative life impact of headaches for chronic migraineurs? A national survey.

Science.gov (United States)

Lee, Jieun; Bhowmick, Amrita; Wachholtz, Amy

2016-01-01

Chronic migraine is a disabling condition that impacts multiple aspects of migraineurs' lives. Although pharmacological treatments can help to treat the pain associated with migraine headache, chronic migraineurs often experience side-effects of pharmacological treatments. Those experiences may contribute to the observed growth in complementary and alternative medicine (CAM) use among migraineurs. Relatively little is known about the patterns of CAM treatment and the characteristics of chronic migraineurs. Therefore, the purpose of the present study is to investigate the characteristics of chronic migraineurs who use CAM treatment and the relationship among satisfaction with current CAM use, negative life impact, migraine outcomes, and psychiatric comorbidities among chronic migraineurs. 2907 participants were recruited from a well-known online migraine headache resource. All participants were US adults aged 18 years or older. Migraineurs are referred to this website through various routes (e.g., referral from healthcare providers, internet search, obtaining information from research papers, personal invitation from other users, and information shared on social media etc.). Participants completed a 30-min self-report-survey in the spring of 2014. Almost half of the participants reported that they are currently using more than three different CAM treatments even though the majority of the participants reported neutral or dissatisfied with their current CAM treatment. Chronic migraineurs who use CAM treatments were more likely to experience prolonged or frequent migraine headaches (p = .018, η(2) = .0021), and experience greater negative life impact from their headaches (p = .000, η(2) = .0172) compared to non-CAM users. CAM treatment satisfaction was inversely related to the number of psychiatric comorbidities, frequency of migraines, and number of migraine symptoms (p's < .05). However, CAM treatment satisfaction was more strongly correlated with

Perceptions of Value-Congruence with One's Department Chair: Does Match Matter?

Science.gov (United States)

Virick, Meghna; Strage, Amy

2016-01-01

Although studies have examined numerous factors that predict junior faculty success, previous research has paid little attention to the role played by department chairs. Drawing on theory from person-environment fit theory and value congruence, we sought to examine the implication of a match versus mismatch between faculty members and their chairs…

Reflections from a chair: Leadership of a clinical department at an academic medical center.

Science.gov (United States)

Willett, Christopher G

2015-11-01

The leadership position of an academic departmental chair can be a positive and rewarding opportunity. These rewards principally stem from the success of the faculty, residents, other trainees, nurses, and everyone supporting the department. With health care reform and the constraints of the federal budget, increasing attention and time has become directed toward administrative management. There are multiple and often competing constituencies and agendas requiring thoughtful strategies to achieve departmental goals. The objectives of a chair are advancing patient care, education, and research. True excellence of a department is achieved by the innovation of its faculty. © 2015 The Authors. Cancer published by Wiley Periodicals, Inc. on behalf of American Cancer Society.

Fabricating CAD/CAM Implant-Retained Mandibular Bar Overdentures: A Clinical and Technical Overview

Directory of Open Access Journals (Sweden)

Chui Ling Goo

2017-01-01

Full Text Available This report describes the clinical and technical aspects in the oral rehabilitation of an edentulous patient with knife-edge ridge at the mandibular anterior edentulous region, using implant-retained overdentures. The application of computer-aided design and computer-aided manufacturing (CAD/CAM in the fabrication of the overdenture framework simplifies the laboratory process of the implant prostheses. The Nobel Procera CAD/CAM System was utilised to produce a lightweight titanium overdenture bar with locator attachments. It is proposed that the digital workflow of CAD/CAM milled implant overdenture bar allows us to avoid numerous technical steps and possibility of casting errors involved in the conventional casting of such bars.

Why aren't there more women leaders in academic medicine? the views of clinical department chairs.

Science.gov (United States)

Yedidia, M J; Bickel, J

2001-05-01

A scarcity of women in leadership positions in academic medicine has persisted despite their increasing numbers in medical training. To understand the barriers confronting women and potential remedies, clinical department chairs with extensive leadership experience were interviewed. In 1998-99, open-ended interviews averaging 80 minutes in length were conducted with 34 chairs and two division chiefs in five specialties. Individuals were selected to achieve a balance for gender, geographic locale, longevity in their positions, and sponsorship and research intensity of their institutions. The interviews were audiotaped and fully transcribed, and the themes reported emerged from inductive analysis of the responses using standard qualitative techniques. The chairs' responses centered on the constraints of traditional gender roles, manifestations of sexism in the medical environment, and lack of effective mentors. Their strategies for addressing these barriers ranged from individual or one-on-one interventions (e.g., counseling, confronting instances of bias, and arranging for appropriate mentors) to institutional changes (e.g., extending tenure probationary periods, instituting mechanisms for responding to unprofessional behavior, establishing mentoring networks across the university). The chairs universally acknowledged the existence of barriers to the advancement of women and proposed a spectrum of approaches to address them. Individual interventions, while adapting faculty to requirements, also tend to preserve existing institutional arrangements, including those that may have adverse effects on all faculty. Departmental or school-level changes address these shortcomings and have a greater likelihood of achieving enduring impact.

New chair for the Particle Physics and Astronomy Research Council

CERN Multimedia

2001-01-01

Peter Warry has been appointed as Chair of PPARC for the next 4 years. Chairman of Victrex plc, whose business is in speciality chemicals, he has been an Industrial Professor at the University of Warwick since 1993. PPARC pursues a programme of high quality basic research in particle physics, astronomy, cosmology and space science and its budget for 2002 is approximately 220 million GBP.

Patients’ views of CAM as spiritual practice

DEFF Research Database (Denmark)

Ulrich, Anita; Evron, Lotte; Ostenfeld-Rosenthal, Ann

2011-01-01

significantly elaborated upon in narratives by four female participants to warrant more detailed consideration and analysis. Conclusion: It is suggested that for some cancer patients CAM may function, not just as a treatment for cancer related symptoms and side effects, but also as a form of spiritual practice...

performance characteristics of a cam turning attachment

African Journals Online (AJOL)

Dr Obe

ABSTRACT. A modification of a cylindrical turning unit has been done to give a non- cylindrical turning attachment for production of irregular shapes, like cams on the lathe machine. To assess the performance of the attachment, cutting forces have been measured using a 'Sigma' Cutting Tool. Dynamometer. Furthermore ...

[Detection and clinical value of epithelial cellular adhesion molecule (EpCAM) mRNA positive circulating tumor cells in metastatic breast cancer].

Science.gov (United States)

Yan, Ying; Cheng, Jian-ping; Di, Li-jun; Song, Guo-hong; Ren, Jun

2012-04-18

To test for circulating tumor cells (CTCs) relying on epithelial cellular adhesion molecule (EpCAM) expression in metastatic breast cancer by quantitative real-time reverse transcription-PCR. In the study,47 metastatic breast cancer patients were evaluated by quantitative real-time PCR for detecting EpCAM mRNA. In addition, analyses were carried out for their correlation with patients' clinicopathologic features, response, and the time to progression (TTP). The sensitivity of EpCAM mRNA in the metastatic breast cancer patients was about 40%. However, the specificity of EpCAM mRNA for 20 healthy controls was 100%. TTP was calculated, and compared with that between EpCAM mRNA-positive and EpCAM mRNA-negative groups. For the retrospective study, the median TTP was 7.1 months and 11.1 months (P=0.013) for patients with EpCAM mRNA-positive and EpCAM mRNA-negative, respectively, after the first cycle chemotherapy. Moreover, a statistically significant correlation was demonstrated between EpCAM mRNA and TTP in patients who underwent the first or the second-line chemotherapy (P=0.018), but there was no significance in the patients pretreated with two or more previous chemotherapy lines (P=0.471). This study provides evidence of the presence of EpCAM mRNA in approximately 40% of patients with metastatic breast cancer. There is a strong correlation between EpCAM mRNA results after the first cycle therapy and TTP in metastatic breast cancer patients, and EpCAM mRNA positive after chemotherapy may predict shorter TTP.

SenseCam improves memory for recent events and quality of life in a patient with memory retrieval difficulties.

Science.gov (United States)

Browne, Georgina; Berry, Emma; Kapur, Narinder; Hodges, Steve; Smyth, Gavin; Watson, Peter; Wood, Ken

2011-10-01

A wearable camera that takes pictures automatically, SenseCam, was used to generate images for rehearsal, promoting consolidation and retrieval of memories for significant events in a patient with memory retrieval deficits. SenseCam images of recent events were systematically reviewed over a 2-week period. Memory for these events was assessed throughout and longer-term recall was tested up to 6 months later. A written diary control condition followed the same procedure. The SenseCam review procedure resulted in significantly more details of an event being recalled, with twice as many details recalled at 6 months follow up compared to the written diary method. Self-report measures suggested autobiographical recollection was triggered by the SenseCam condition but not by reviewing the written diary. Emotional and social wellbeing questionnaires indicated improved confidence and decreased anxiety as a result of memory rehearsal using SenseCam images. We propose that SenseCam images provide a powerful boost to autobiographical recall, with secondary benefits for quality of life.

CAM visual stimulation with conventional method of occlusion treatment in amblyopia: a randomized clinical trial

Directory of Open Access Journals (Sweden)

Ali Reza Jafari

2014-04-01

Conclusion: Using of CAM visual stimulation along with conventional occlusion will further improve visual acuity and stereopsis in amblyopic children. These findings recommended the CAM visual stimulation as an accompanying and complementary method in amblyopia treatment.

Crystal ball gazing : chair of foresight takes the long-term view

Energy Technology Data Exchange (ETDEWEB)

Smith, M.

2010-03-15

This article focused on Alberta's primary industry, namely oil and gas, and identifying important emerging opportunity needs in the mid to longer term future. The chair of Alberta Innovates Technology Futures (AITF), an agency which supersedes the Alberta Research Council must look well beyond a 5-year timeframe to a more longer-term strategic thinking. This article discussed how the mandate of the Chair position extended to all areas of research relevant to the province and its future prosperity, from communities of the future and economic development to future energy supply and environmental impacts. The article discussed the 3 stages of foresight methodologies that include studying the current situation in terms of underlying forces and trends to produce knowledge; examining where present circumstances will lead if allowed to evolve naturally, or if intervention occurred to alter those outcomes; and translating those insights into action. The article also addressed the issue of trimming carbon dioxide (CO{sub 2}) emissions. The chair of AITF has turned his attention to reducing the impact of distributed sources, notably those from the tailpipe and the home furnace. Rather than capturing at source, he is looking to ways of removing it directly from the atmosphere, preferably in a biological way. One way is to take plant matter, which accumulates CO{sub 2} as it grows, and burn it in the absence of oxygen, creating carbon-rich biochar. When added to soil, this biochar improves soil quality when used in connection with farming. This creates the possibility of removing CO{sub 2} from the atmosphere and converting it back through plants into carbon, a type of carbon capture and storage (CCS) except for distributed CO{sub 2}. 1 fig.

Treatment Expectations for CAM Interventions in Pediatric Chronic Pain Patients and their Parents

Directory of Open Access Journals (Sweden)

Jennie C. I. Tsao

2005-01-01

Full Text Available Patient expectations regarding complementary and alternative medicine (CAM interventions have important implications for treatment adherence, attrition and clinical outcome. Little is known, however, about parent and child treatment expectations regarding CAM approaches for pediatric chronic pain problems. The present study examined ratings of the expected benefits of CAM (i.e. hypnosis, massage, acupuncture, yoga and relaxation and conventional medicine (i.e. medications, surgery interventions in 45 children (32 girls; mean age = 13.8 years ± 2.5 and parents (39 mothers presenting for treatment at a specialty clinic for chronic pediatric pain. Among children, medications and relaxation were expected to be significantly more helpful than the remaining approaches (P < 0.01. However, children expected the three lowest rated interventions, acupuncture, surgery and hypnosis, to be of equal benefit. Results among parents were similar to those found in children but there were fewer significant differences between ratings of the various interventions. Only surgery was expected by parents to be significantly less helpful than the other approaches (P < 0.01. When parent and child perceptions were compared, parents expected hypnosis, acupuncture and yoga, to be more beneficial than did children, whereas children expected surgery to be more helpful than did parents (P < 0.01. Overall, children expected the benefits of CAM to be fairly low with parents' expectations only somewhat more positive. The current findings suggest that educational efforts directed at enhancing treatment expectations regarding CAM, particularly among children with chronic pain, are warranted.

Usage of Complementary and Alternative Medicine (CAM) among osteoarthritis patients attending an urban multi-specialist hospital in Lagos, Nigeria.

Science.gov (United States)

Obalum, D C; Ogo, C N

2011-03-01

Osteoarthritis (OA), a chronic degenerative disease of synovial joints is characterised by pain and stiffness. Aim of treatment is pain relief. Complementary and alternative medicine (CAM) refers to practices which are not an integral part of orthodox medicine. To determine the pattern of usage of CAM among OA patients in Nigeria. Consecutive patients with OA attending orthopaedic clinic of Havana Specialist Hospital, Lagos, Nigeria were interviewed over a 6- month period st st of 1 May to 31 October 2007 on usage of CAM. Structured and open-ended questions were used. Demographic data, duration of OA and treatment as well as compliance to orthodox medications were documented. One hundred and sixty four patients were studied.120 (73.25%) were females and 44(26.89%) were males. Respondents age range between 35-74 years. 66(40.2%) patients used CAM. 35(53.0%) had done so before presenting to the hospital. The most commonly used CAM were herbal products used by 50(75.8%) of CAM users. Among herbal product users, 74.0% used non- specific local products, 30.0% used ginger, 36.0% used garlic and 28.0% used Aloe Vera. Among CAM users, 35(53.0%) used local embrocation and massage, 10(15.2%) used spiritual methods. There was no significant difference in demographics, clinical characteristics and pain control among CAM users and non-users. Many OA patients receiving orthodox therapy also use CAM. Medical doctors need to keep a wary eye on CAM usage among patients and enquire about this health-seeking behaviour in order to educate them on possible drug interactions, adverse effects and long term complications.

Interview with Mr Bernard Dormy, Chair of TREF, in November 2017

CERN Multimedia

Staff Association

2018-01-01

Mr Bernard Dormy finished his term of office as the Chair of the Tripartite Employment Conditions Forum (TREF) (see Echo No. 242) at the end of 2017. On this occasion, the Staff Association met with him to discuss CERN and its personnel and, amongst other things, the model for concertation. Moreover, the Staff Association would like to take this opportunity to applaud Mr Dormy for the commitment he has shown since 2003, when he first started at TREF as a delegate of France. It is easy to believe that Mr Dormy found his mandate in this Forum particularly pleasing, since he served as the Vice-Chair of TREF from 2007 to 2011, and then as the Chairman from 2012 to 2017. During his chairmanship, Mr Dormy always made sure that the concertation took place under the best possible conditions, in a constructive manner and in a spirit of mutual respect. Furthermore, he placed great emphasis on diversity at CERN: there was not a single TREF meeting without an update on diversity issues and progress ma...

Can a smart chair improve the sitting behavior of office workers?

Science.gov (United States)

Roossien, C C; Stegenga, J; Hodselmans, A P; Spook, S M; Koolhaas, W; Brouwer, S; Verkerke, G J; Reneman, M F

2017-11-01

Prolonged sitting can cause health problems and musculoskeletal discomfort. There is a need for objective and non-obstructive means of measuring sitting behavior. A 'smart' office chair can monitor sitting behavior and provide tactile feedback, aiming to improve sitting behavior. This study aimed to investigate the effect of the feedback signal on sitting behavior and musculoskeletal discomfort. In a 12-week prospective cohort study (ABCB design) among office workers (n = 45) was measured sitting duration and posture, feedback signals and musculoskeletal discomfort. Between the study phases, small changes were observed in mean sitting duration, posture and discomfort. After turning off the feedback signal, a slight increase in sitting duration was observed (10 min, p = 0.04), a slight decrease in optimally supported posture (2.8%, p < 0.01), and musculoskeletal discomfort (0.8, p < 0.01) was observed. We conclude that the 'smart' chair is able to monitor the sitting behavior, the feedback signal, however, led to small or insignificant changes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Excitatory Synaptic Drive and Feedforward Inhibition in the Hippocampal CA3 Circuit Are Regulated by SynCAM 1.

Science.gov (United States)

Park, Kellie A; Ribic, Adema; Laage Gaupp, Fabian M; Coman, Daniel; Huang, Yuegao; Dulla, Chris G; Hyder, Fahmeed; Biederer, Thomas

2016-07-13

Select adhesion proteins control the development of synapses and modulate their structural and functional properties. Despite these important roles, the extent to which different synapse-organizing mechanisms act across brain regions to establish connectivity and regulate network properties is incompletely understood. Further, their functional roles in different neuronal populations remain to be defined. Here, we applied diffusion tensor imaging (DTI), a modality of magnetic resonance imaging (MRI), to map connectivity changes in knock-out (KO) mice lacking the synaptogenic cell adhesion protein SynCAM 1. This identified reduced fractional anisotropy in the hippocampal CA3 area in absence of SynCAM 1. In agreement, mossy fiber refinement in CA3 was impaired in SynCAM 1 KO mice. Mossy fibers make excitatory inputs onto postsynaptic specializations of CA3 pyramidal neurons termed thorny excrescences and these structures were smaller in the absence of SynCAM 1. However, the most prevalent targets of mossy fibers are GABAergic interneurons and SynCAM 1 loss unexpectedly reduced the number of excitatory terminals onto parvalbumin (PV)-positive interneurons in CA3. SynCAM 1 KO mice additionally exhibited lower postsynaptic GluA1 expression in these PV-positive interneurons. These synaptic imbalances in SynCAM 1 KO mice resulted in CA3 disinhibition, in agreement with reduced feedforward inhibition in this network in the absence of SynCAM 1-dependent excitatory drive onto interneurons. In turn, mice lacking SynCAM 1 were impaired in memory tasks involving CA3. Our results support that SynCAM 1 modulates excitatory mossy fiber inputs onto both interneurons and principal neurons in the hippocampal CA3 area to balance network excitability. This study advances our understanding of synapse-organizing mechanisms on two levels. First, the data support that synaptogenic proteins guide connectivity and can function in distinct brain regions even if they are expressed broadly

"We make choices we think are going to save us": Debate and stance identification for online breast cancer CAM discussions.

Science.gov (United States)

Zhang, Shaodian; Qiu, Lin; Chen, Frank; Zhang, Weinan; Yu, Yong; Elhadad, Noémie

2017-04-01

Patients discuss complementary and alternative medicine (CAM) in online health communities. Sometimes, patients' conflicting opinions toward CAM-related issues trigger debates in the community. The objectives of this paper are to identify such debates, identify controversial CAM therapies in a popular online breast cancer community, as well as patients' stances towards them. To scale our analysis, we trained a set of classifiers. We first constructed a supervised classifier based on a long short-term memory neural network (LSTM) stacked over a convolutional neural network (CNN) to detect automatically CAM-related debates from a popular breast cancer forum. Members' stances in these debates were also identified by a CNN-based classifier. Finally, posts automatically flagged as debates by the classifier were analyzed to explore which specific CAM therapies trigger debates more often than others. Our methods are able to detect CAM debates with F score of 77%, and identify stances with F score of 70%. The debate classifier identified about 1/6 of all CAM-related posts as debate. About 60% of CAM-related debate posts represent the supportive stance toward CAM usage. Qualitative analysis shows that some specific therapies, such as Gerson therapy and usage of laetrile, trigger debates frequently among members of the breast cancer community. This study demonstrates that neural networks can effectively locate debates on usage and effectiveness of controversial CAM therapies, and can help make sense of patients' opinions on such issues under dispute. As to CAM for breast cancer, perceptions of their effectiveness vary among patients. Many of the specific therapies trigger debates frequently and are worth more exploration in future work.

The synaptic cell adhesion molecule, SynCAM1, mediates astrocyte-to-astrocyte and astrocyte-to-GnRH neuron adhesiveness in the mouse hypothalamus.

Science.gov (United States)

Sandau, Ursula S; Mungenast, Alison E; McCarthy, Jack; Biederer, Thomas; Corfas, Gabriel; Ojeda, Sergio R

2011-06-01

We previously identified synaptic cell adhesion molecule 1 (SynCAM1) as a component of a genetic network involved in the hypothalamic control of female puberty. Although it is well established that SynCAM1 is a synaptic adhesion molecule, its contribution to hypothalamic function is unknown. Here we show that, in addition to the expected neuronal localization illustrated by its presence in GnRH neurons, SynCAM1 is expressed in hypothalamic astrocytes. Cell adhesion assays indicated that SynCAM is recognized by both GnRH neurons and astrocytes as an adhesive partner and promotes cell-cell adhesiveness via homophilic, extracellular domain-mediated interactions. Alternative splicing of the SynCAM1 primary mRNA transcript yields four mRNAs encoding membrane-spanning SynCAM1 isoforms. Variants 1 and 4 are predicted to be both N and O glycosylated. Hypothalamic astrocytes and GnRH-producing GT1-7 cells express mainly isoform 4 mRNA, and sequential N- and O-deglycosylation of proteins extracted from these cells yields progressively smaller SynCAM1 species, indicating that isoform 4 is the predominant SynCAM1 variant expressed in astrocytes and GT1-7 cells. Neither cell type expresses the products of two other SynCAM genes (SynCAM2 and SynCAM3), suggesting that SynCAM-mediated astrocyte-astrocyte and astrocyte-GnRH neuron adhesiveness is mostly mediated by SynCAM1 homophilic interactions. When erbB4 receptor function is disrupted in astrocytes, via transgenic expression of a dominant-negative erbB4 receptor form, SynCAM1-mediated adhesiveness is severely compromised. Conversely, SynCAM1 adhesive behavior is rapidly, but transiently, enhanced in astrocytes by ligand-dependent activation of erbB4 receptors, suggesting that erbB4-mediated events affecting SynCAM1 function contribute to regulate astrocyte adhesive communication.

The effect of glazing and aging on the surface properties of CAD/CAM resin blocks.

Science.gov (United States)

Tekçe, Neslihan; Fidan, Sinan; Tuncer, Safa; Kara, Dilan; Demirci, Mustafa

2018-02-01

To investigate the effect of accelerated aging on surface properties of glazed CAD/CAM resin blocks using a 2D surface profilometer and a 3D non-contact optical profilometer. Three types of CAD/CAM resin restorative materials, LAVA Ultimate (3M ESPE, St Paul, MN, USA), VITA Enamic (Vita Zahnfabrik H. Rauter, Bad Säckingen, Germany), and Cerasmart (GC Corparation, Tokyo, Japan) were used for this study. CAD/CAM blocks were cut in 3-mm thickness slabs and divided into three groups; Group 1: control group (specimens polished with 600 grit SCI paper); Group 2: specimens sandblasted, silanized, and glazed with Optiglaze Color (GC); Group 3: glazed specimens subjected to 5000 thermocycles (n=15). The surface roughness (R a and R z ) was evaluated using a profilometer and a 3D scanning instrument. Data were analyzed using two-way ANOVA and Tukey's post-hoc test ( P .05). For VITA and Cerasmart, the specimens in Group 1 exhibited significantly higher R a values than Group 2 ( P .05). Glaze material Optiglaze Color makes CAD/CAM resin surfaces smooth and glazed CAD/CAM surfaces seem resistant to deterioration under 5000 thermocycles.

Utilization of complementary and alternative medicine (CAM) among children from a German birth cohort (GINIplus): patterns, costs, and trends of use.

Science.gov (United States)

Italia, Salvatore; Brand, Helmut; Heinrich, Joachim; Berdel, Dietrich; von Berg, Andrea; Wolfenstetter, Silke Britta

2015-03-10

The use of complementary and alternative medicine (CAM) is widespread among children in Germany and other European countries. Only a few studies are available on trends in pediatric CAM use over time. The study's objective was to present updated results for prevalence, predictors, and costs of CAM use among German children and a comparison with findings from a previous follow-up of the same birth cohort. Data were collected for 3013 children on their utilization of medicinal products (during the last 4 weeks) and consultation with CAM providers (in the preceding year) from a German birth cohort study (GINIplus, 15-year follow-up) using a self-administered questionnaire. The reported medicinal CAMs were classified into six categories (homeopathy, herbal drugs, nutritionals, minerals and trace elements, microorganisms, further CAM). Drug prices were traced using pharmaceutical identification numbers (PZNs), or otherwise conservatively estimated. Finally, the results were compared with data obtained from the 10-year follow-up of the same birth cohort study by adopting the identical methodology. In all, 26% of the reported 2489 drugs were medicinal CAM. The 4-week prevalence for homeopathy and herbal drug use was 7.5% and 5.6%, respectively. Some 13.9% of the children used at least one type of medicinal CAM in the preceding 4 weeks. The 1-year prevalence for consultation with CAM providers was 10.8%. From the drugs identified as CAM, 53.7% were homeopathic remedies, and 30.8% were herbal drugs. Factors associated with higher medicinal CAM use were female gender, residing in Munich, and higher maternal education. A homeopathy user utilized on average homeopathic remedies worth EUR 15.28. The corresponding figure for herbal drug users was EUR 16.02, and EUR 18.72 for overall medicinal CAM users. Compared with the 10-year follow-up, the prevalence of homeopathy use was more than halved (-52%) and dropped substantially for herbal drug use (-36%) and overall CAM use (-38

Developmental distribution of CaM kinase II in the antennal lobe of the sphinx moth Manduca sexta.

Science.gov (United States)

Lohr, Christian; Bergstein, Sandra; Hirnet, Daniela

2007-01-01

The antennal lobe (primary olfactory center of insects) is completely reorganized during metamorphosis. This reorganization is accompanied by changing patterns of calcium signaling in neurons and glial cells. In the present study, we investigated the developmental distribution of a major calcium-dependent protein, viz., calcium/calmodulin-dependent protein kinase II (CaM kinase II), in the antennal lobe of the sphinx moth Manduca sexta by using a monoclonal antibody. During synaptogenesis (developmental stages 6-10), we found a redistribution of CaM kinase II immunoreactivity, from a homogeneous distribution in the immature neuropil to an accumulation in the neuropil of the glomeruli. CaM kinase II immunoreactivity was less intense in olfactory receptor axons of the antennal nerve and antennal lobe glial cells. Western blot analysis revealed a growing content of CaM kinase II in antennal lobe tissue throughout metamorphosis. Injection of the CaM kinase inhibitor KN-93 into pupae resulted in a reduced number of antennal lobe glial cells migrating into the neuropil to form borders around glomeruli. The results suggest that CaM kinase II is involved in glial cell migration.

The impact of office chair features on lumbar lordosis, intervertebral joint and sacral tilt angles: a radiographic assessment.

Science.gov (United States)

De Carvalho, Diana; Grondin, Diane; Callaghan, Jack

2017-10-01

The purpose of this study was to determine which office chair feature is better at improving spine posture in sitting. Participants (n = 28) were radiographed in standing, maximum flexion and seated in four chair conditions: control, lumbar support, seat pan tilt and backrest with scapular relief. Measures of lumbar lordosis, intervertebral joint angles and sacral tilt were compared between conditions and sex. Sitting consisted of approximately 70% of maximum range of spine flexion. No differences in lumbar flexion were found between the chair features or control. Significantly more anterior pelvic rotation was found with the lumbar support (p = 0.0028) and seat pan tilt (p < 0.0001). Males had significantly more anterior pelvic rotation and extended intervertebral joint angles through L1-L3 in all conditions (p < 0.0001). No one feature was statistically superior with respect to minimising spine flexion, however, seat pan tilt resulted in significantly improved pelvic posture. Practitioner Summary: Seat pan tilt, and to some extent lumbar supports, appear to improve seated postures. However, sitting, regardless of chair features used, still involves near end range flexion of the spine. This will increase stresses to the spine and could be a potential injury generator during prolonged seated exposures.

Estimation of whole body dose in an unusual event: spillage of radioactive material on the chair

International Nuclear Information System (INIS)

Adtani, M.M.; Biju, K.; Deshpande, M.D.; Shivde, R.K.; Kulkarni, V.V.

2005-01-01

The personnel monitoring in India is done using thermoluminescence dosimeters worn at chest level. In research institutions and in nuclear facilities where radiation sources are processed in dispersible forms, a remote possibility exists that radiation source entering in the area where installed monitor does not exist and the source may get spilled on chair and causing exposure to persons sitting on the chair. In such case TLD may not give the correct exposure as there is shielding of individuals body. An attempt is made to find out a factor for estimating the whole body dose by knowing the TLD badge dose or by measuring the gonad dose. Experiments are performed using TLDs and also measurement by teletector. Monte Carlo simulations are also done. It is observed that a factor of 8 to TLD Badge dose will give whole body dose if worker has received dose only on said chair or by applying a factor of 0.23 to dose measured at gonad level will give whole body dose. (author)

Concurrent Complementary and Alternative Medicine CAM and Conventional Rehabilitation Therapy in the Management of Children with Developmental Disorders

Directory of Open Access Journals (Sweden)

Soo Yeon Kim

2013-01-01

Full Text Available Background. We investigated the concurrent use of conventional rehabilitations and complementary and alternative medicine (CAM therapies for the long-term management of children with developmental disorders (DDs. Methods. The parents or caregivers of 533 children with DDs (age range, 1–19 years who visited the rehabilitation centers were surveyed using in depth face-to-face interviews. Results. Of the 533 patients enrolled, 520 completed the questionnaire (97% response rate. A total of 292 (56% children were receiving multiple therapies, more than two conventional rehabilitations and CAM, at the time of the interview. A total of 249 (48% children reported lifetime CAM use, 23% used CAM at the time of the interview, and 62% of the patients planned to use CAM therapy in the future. Conventional rehabilitation therapies used at the time of the interview included physical therapy (30%, speech therapy (28%, and occupational therapy (19%, and the CAM therapies included herbal medicine (5% and acupuncture or moxibustion (3%. The respondents indicated that in the future they planned to use acupuncture or moxibustion (57%, occupational therapy (18%, cognitive behavioral therapy (16%, speech therapy (10%, and physical therapy (8%. Conclusion. Concurrent management as conventional rehabilitations and CAM therapies is widely used by children with DDs.

Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete dentures.

Science.gov (United States)

Al-Fouzan, Afnan F; Al-Mejrad, Lamya A; Albarrag, Ahmed M

2017-10-01

The goal of this study was to compare the adhesion of Candida albicans to the surfaces of CAD/CAM and conventionally fabricated complete denture bases. Twenty discs of acrylic resin poly (methyl methacrylate) were fabricated with CAD/CAM and conventional procedures (heat-polymerized acrylic resin). The specimens were divided into two groups: 10 discs were fabricated using the CAD/CAM procedure (Wieland Digital Denture Ivoclar Vivadent), and 10 discs were fabricated using a conventional flasking and pressure-pack technique. Candida colonization was performed on all the specimens using four Candida albicans isolates. The difference in Candida albicans adhesion on the discs was evaluated. The number of adherent yeast cells was calculated by the colony-forming units (CFU) and by Fluorescence microscopy. There was a significant difference in the adhesion of Candida albicans to the complete denture bases created with CAD/CAM and the adhesion to those created with the conventional procedure. The CAD/CAM denture bases exhibited less adhesion of Candida albicans than did the denture bases created with the conventional procedure ( P CAD/CAM procedure for fabricating complete dentures showed promising potential for reducing the adherence of Candida to the denture base surface. Clinical Implications. Complete dentures made with the CAD/CAM procedure might decrease the incidence of denture stomatitis compared with conventional dentures.

A scoping review of research on complementary and alternative medicine (CAM) and the mass media: looking back, moving forward.

Science.gov (United States)

Weeks, Laura C; Strudsholm, Tina

2008-07-19

The use of complementary and alternative medicine (CAM) has become more common in Western developed countries in recent years, as has media reporting on CAM and related issues. Correspondingly, media reports are a primary information source regarding decisions to use CAM. Research on CAM related media reports is becoming increasingly relevant and important; however, identifying key concepts to guide future research is problematic due to the dispersed nature of completed research in this field. A scoping review was conducted to: 1) determine the amount, focus and nature of research on CAM and the mass media; and 2) summarize and disseminate related research results. The main phases were: 1) searching for relevant studies; 2) selecting studies based on pre-defined inclusion criteria; 3) extracting data; and 4) collating, summarizing and reporting the results. Of 4,454 studies identified through various search strategies, 16 were relevant to our objectives and included in a final sample. CAM and media research has focused primarily on print media coverage of a range of CAM therapies, although only a few studies articulated differences within the range of therapies surveyed. Research has been developed through a variety of disciplinary perspectives, with a focus on representation research. The research reviewed suggests that journalists draw on a range of sources to prepare media reports, although most commonly they cite conventional (versus CAM) sources and personal anecdotes. The tone of media reports appears generally positive, which may be related to a lack of reporting on issues related to risk and safety. Finally, a variety of discourses within media representations of CAM are apparent that each appeal to a specific audience through resonance with their specific concerns. Research on CAM and the mass media spans multiple disciplines and strategies of inquiry; however, despite the diversity in approach, it is clear that issues related to production and reception

Motion laws synthesis for cam mechanisms with multiple follower displacement

Science.gov (United States)

Podgornyj, Yu I.; Skeeba, V. Yu; Kirillov, A. V.; Martynova, T. G.; Skeeba, P. Yu

2018-03-01

The research discusses the cam mechanisms design. The analysis of specialized literature indicates that the synthesis of the cam mechanisms laws of motion is currently done mainly by a standard set of acceleration curves. In some cases, the designer needs to synthesize a new acceleration law which should be task-specific and enforce a certain production step. The values of the technological loads and inertia forces loads generated by the mechanism are calculated to analyze the slay mechanism behavior in the production of closely woven fabrics. Mathematical packages MathCad and SolidWorks are used in calculations. As a result of the research, the authors propose the methodology for synthesizing the slay mechanism with multiple follower displacements for the point of contact between the reed and the fabric edge. Theoretical studies have been tested on a specific machine model (STB loom). The authors have synthesized the motion law of the filling threads beat-up mechanism for the production of strong fabrics. New basic and closing cam profiles are proposed. The results are designed to enhance the possibilities of the looms and to recommend the most efficient equipment operation modes for the producers.

Career development resource: educational leadership in a department of surgery: vice chairs for education.

Science.gov (United States)

Sanfey, Hilary; Boehler, Margaret; DaRosa, Debra; Dunnington, Gary L

2012-07-01

The growing appreciation of the need to adopt an evidence-based approach to teaching and assessment has led to a demand for faculty who are well versed in best practices in education. Surgeons with interest and expertise in instruction, curriculum development, educational research, and evaluation can have an important impact on the educational mission of a department of surgery. The increased fervor for accountability in education together with the challenges imposed by accreditation agencies and hospitals has made educational leadership responsibilities more time consuming and complex. In response to this, an increasing number of department chairs created Vice Chair for Education positions to support clerkship and program directors and ensure the department's education mission statement is fulfilled. Copyright © 2012 Elsevier Inc. All rights reserved.

The varied contribution of significant others to Complementary and Alternative Medicine (CAM) uptake by men with cancer: a qualitative analysis.

Science.gov (United States)

Klafke, Nadja; Eliott, Jaklin A; Olver, Ian N; Wittert, Gary A

2014-06-01

To explore how men's Significant Others (SOs), including family members and close friends, contribute to the uptake and maintenance of specific CAM therapies. This study was the second, qualitative phase of a mixed-methods project investigating the use of CAM in an Australian male cancer population. Male participants were purposefully selected from a pool of 403 patients who answered a survey in the first quantitative phase (94% response rate and 86% consent rate for follow-up interview). Then semi-structured interviews among 26 men with a variety of cancers and 24 SOs were conducted. All 43 interviews were recorded, transcribed, and analysed thematically. Men used CAM/Natural products to cope with physical concerns, and this was actively supported by men's SOs who contributed to the uptake and maintenance of these CAMs. The shared CAM preparation and consumption functioned to strengthen the bond between men and their SOs, and also helped men's SOs to cope with uncertainty and regain control. In contrast, men practiced CAM/Mind-body medicine to receive emotional benefits, and only rarely shared this practice with their SOs, indicating a need for coping with emotions in a private way. Men's CAM use is a multifaceted process that can be better understood by considering CAM categories separately. CAM/Natural products help men to cope with physical concerns, while CAM/Mind-body medicine assist men to cope with their emotions in a private way. Oncology professionals can use this information to better promote and implement integrative cancer care services. Copyright © 2014 Elsevier Ltd. All rights reserved.

Calcium Sulfate Characterized by ChemCam/Curiosity at Gale Crater, Mars

Science.gov (United States)

Nachon, M.; Clegg, S. N.; Mangold, N.; Schroeder, S.; Kah, L. C.; Dromart, G.; Ollila, A.; Johnson, J. R.; Oehler, D. Z.; Bridges, J. C.;

Motorized CPM/CAM physiotherapy device with sliding-mode Fuzzy Neural Network control loop.

Science.gov (United States)

Ho, Hung-Jung; Chen, Tien-Chi

2009-11-01

Continuous passive motion (CPM) and controllable active motion (CAM) physiotherapy devices promote rehabilitation of damaged joints. This paper presents a computerized CPM/CAM system that obviates the need for mechanical resistance devices such as springs. The system is controlled by a computer which performs sliding-mode Fuzzy Neural Network (FNN) calculations online. CAM-type resistance force is generated by the active performance of an electric motor which is controlled so as to oppose the motion of the patient's leg. A force sensor under the patient's foot on the device pedal provides data for feedback in a sliding-mode FNN control loop built around the motor. Via an active impedance control feedback system, the controller drives the motor to behave similarly to a damped spring by generating and controlling the amplitude and direction of the pedal force in relation to the patient's leg. Experiments demonstrate the high sensitivity and speed of the device. The PC-based feedback nature of the control loop means that sophisticated auto-adaptable CPM/CAM custom-designed physiotherapy becomes possible. The computer base also allows extensive data recording, data analysis and network-connected remote patient monitoring.

CAD-CAM plates versus conventional fixation plates for primary mandibular reconstruction: A biomechanical in vitro analysis.

Science.gov (United States)

Rendenbach, Carsten; Sellenschloh, Kay; Gerbig, Lucca; Morlock, Michael M; Beck-Broichsitter, Benedicta; Smeets, Ralf; Heiland, Max; Huber, Gerd; Hanken, Henning

2017-11-01

CAD/CAM reconstruction plates have become a viable option for mandible reconstruction. The aim of this study was to determine whether CAD/CAM plates provide higher fatigue strength compared with conventional fixation systems. 1.0 mm miniplates, 2.0 mm conventional locking plates (DePuy Synthes, Umkirch, Germany), and 2.0 mm CAD/CAM plates (Materialise, Leuven, Belgium/DePuy Synthes) were used to reconstruct a polyurethane mandible model (Synbone, Malans, CH) with cortical and cancellous bone equivalents. Mastication was simulated via cyclic dynamic testing using a universal testing machine (MTS, Bionix, Eden Prairie, MN, USA) until material failure reached a rate of 1 Hz with increasing loads on the left side. No significant difference was found between the groups until a load of 300 N. At higher loads, vertical displacement differed increasingly, with a poorer performance of miniplates (p = 0.04). Plate breakage occurred in miniplates and conventional locking plates. Screw breakage was recorded as the primary failure mechanism in CAD/CAM plates. Stiffness was significantly higher with the CAD/CAM plates (p = 0.04). CAD/CAM plates and reconstruction plates provide higher fatigue strength than miniplates, and stiffness is highest in CAD/CAM systems. All tested fixation methods seem sufficiently stable for mandible reconstruction. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Assessment of reliability of CAD-CAM tooth-colored implant custom abutments.

Science.gov (United States)

Guilherme, Nuno Marques; Chung, Kwok-Hung; Flinn, Brian D; Zheng, Cheng; Raigrodski, Ariel J

2016-08-01

Information is lacking about the fatigue resistance of computer-aided design and computer-aided manufacturing (CAD-CAM) tooth-colored implant custom abutment materials. The purpose of this in vitro study was to investigate the reliability of different types of CAD-CAM tooth-colored implant custom abutments. Zirconia (Lava Plus), lithium disilicate (IPS e.max CAD), and resin-based composite (Lava Ultimate) abutments were fabricated using CAD-CAM technology and bonded to machined titanium-6 aluminum-4 vanadium (Ti-6Al-4V) alloy inserts for conical connection implants (NobelReplace Conical Connection RP 4.3×10 mm; Nobel Biocare). Three groups (n=19) were assessed: group ZR, CAD-CAM zirconia/Ti-6Al-4V bonded abutments; group RC, CAD-CAM resin-based composite/Ti-6Al-4V bonded abutments; and group LD, CAD-CAM lithium disilicate/Ti-6Al-4V bonded abutments. Fifty-seven implant abutments were secured to implants and embedded in autopolymerizing acrylic resin according to ISO standard 14801. Static failure load (n=5) and fatigue failure load (n=14) were tested. Weibull cumulative damage analysis was used to calculate step-stress reliability at 150-N and 200-N loads with 2-sided 90% confidence limits. Representative fractured specimens were examined using stereomicroscopy and scanning electron microscopy to observe fracture patterns. Weibull plots revealed β values of 2.59 for group ZR, 0.30 for group RC, and 0.58 for group LD, indicating a wear-out or cumulative fatigue pattern for group ZR and load as the failure accelerating factor for groups RC and LD. Fractographic observation disclosed that failures initiated in the interproximal area where the lingual tensile stresses meet the compressive facial stresses for the early failure specimens. Plastic deformation of titanium inserts with fracture was observed for zirconia abutments in fatigue resistance testing. Significantly higher reliability was found in group ZR, and no significant differences in reliability were

The prevalence of cam-type deformity of the hip joint: a survey of 4151 subjects of the Copenhagen Osteoarthritis Study

DEFF Research Database (Denmark)

Gosvig, K.K.; Jacobsen, S.; Sonne-Holm, S.

2008-01-01

. The relationships between cam malformation and self-reported hip pain were evaluated, and the relative importance of known risk factors for cam malformation estimated. RESULTS: We found a pronounced sex-related difference in cam-deformity distribution. The overall prevalence of cam deformity was approximately 17......BACKGROUND: Cam deformity is a preosteoarthritic malformation causing premature hip-joint degeneration. While the pathogenetic pathway from deformity to osteoarthrosis (OA) has been well established, almost nothing is known of the malformation's epidemiology. PURPOSE: To determine the distribution......% in men and 4% in women. The distribution of cam deformity was unaltered in subjects with normal joint-space width or other features of hip-joint degeneration. We found no significant association with self-reported hip pain, nor did we find any relative importance of possible risk factors for hip...

Surface and top-of-atmosphere radiative feedback kernels for CESM-CAM5

Science.gov (United States)

Pendergrass, Angeline G.; Conley, Andrew; Vitt, Francis M.

2018-02-01

Radiative kernels at the top of the atmosphere are useful for decomposing changes in atmospheric radiative fluxes due to feedbacks from atmosphere and surface temperature, water vapor, and surface albedo. Here we describe and validate radiative kernels calculated with the large-ensemble version of CAM5, CESM1.1.2, at the top of the atmosphere and the surface. Estimates of the radiative forcing from greenhouse gases and aerosols in RCP8.5 in the CESM large-ensemble simulations are also diagnosed. As an application, feedbacks are calculated for the CESM large ensemble. The kernels are freely available at https://doi.org/10.5065/D6F47MT6" target="_blank">https://doi.org/10.5065/D6F47MT6, and accompanying software can be downloaded from https://github.com/apendergrass/cam5-kernels" target="_blank">https://github.com/apendergrass/cam5-kernels.

Immunohistochemical expression of epithelial cell adhesion molecule (EpCAM) in mucoepidermoid carcinoma compared to normal salivary gland tissues.

Science.gov (United States)

Kamal, Noura M; Salem, Hend M; Dahmoush, Heba M

2017-07-01

Mucoepidermoid carcinoma (MEC) is the most common malignant salivary gland tumor which displays biological, histological and clinical diversity thus representing a challenge for its diagnosis and management. Epithelial cell adhesion molecule (EpCAM) is a transmembrane glycoprotein identified as a tumor specific antigen due to its frequent overexpression in the majority of epithelial carcinomas and its correlation with prognosis. It is considered to be a promising biomarker used as a therapeutic target already in ongoing clinical trials. The purpose of this study was to investigate the pattern, cellular characterization and level of EpCAM expression in MEC and demonstrate its correlation with histologic grading which may benefit future clinical trials using EpCAM targeted therapy. 48 specimens (12 normal salivary gland tissue and 36 MEC) were collected and EpCAM membranous expression was evaluated by immunohistochemistry. Total immunoscore (TIS) was evaluated, the term 'EpCAM overexpression' was given for tissues showing a total immunoscore >4. A highly significant difference was observed between TIS percent values in control and different grades of MEC (p<0.001). High grade MEC (HG-MEC) was the highest EpCAM expressor. In addition, EpCAM expression pattern differed among the different grades. EpCAM expression was detected in MEC, and its overexpression correlated with increasing the histological grade. The diffuse membranous expression in HG-MEC could be of diagnostic value in relation to the patchy expression observed in both low grade and intermediate grade MEC. Copyright © 2017 Elsevier Ltd. All rights reserved.

Optical properties of CAD-CAM ceramic systems.

Science.gov (United States)

Della Bona, Alvaro; Nogueira, Audrea D; Pecho, Oscar E

2014-09-01

To evaluate the direct transmittance (T%), translucency, opacity and opalescence of CAD-CAM ceramic systems and the correlation between the translucency parameter (TP) and the contrast ratio (CR). Specimens of shades A1, A2 and A3 (n=5) were fabricated from CAD-CAM ceramic blocks (IPS e.max(®) CAD HT and LT, IPS Empress(®) CAD HT and LT, Paradigm™ C, and VITABLOCS(®) Mark II) and polished to 1.0±0.01mm in thickness. A spectrophotometer (Lambda 20) was used to measure T% on the wavelength range of 400-780nm. Another spectrophotometer (VITA Easyshade(®) Advance) was used to measure the CIE L(*)a(*)b(*) coordinates and the reflectance value (Y) of samples on white and black backgrounds. TP, CR and the opalescence parameter (OP) were calculated. Data were statistically analysed using VAF (variance accounting for) coefficient with Cauchy-Schwarz inequality, one-way ANOVA, Tukey's test, Bonferroni correction and Pearson's correlation. T% of some ceramic systems is dependent on the wavelength. The spectral behaviour showed a slight and constant increase in T% up to approximately 550nm, then some ceramics changed the behaviour as the wavelength gets longer. TP and CR values ranged, respectively, from 16.79 to 21.69 and from 0.52 to 0.64 (r(2)=-0.97). OP values ranged from 3.01 to 7.64. The microstructure of CAD-CAM ceramic systems influenced the optical properties. TP and CR showed a strong correlation for all ceramic systems evaluated. Yet, all ceramics showed some degree of light transmittance. In addition to shade, this study showed that other optical properties influence on the natural appearance of dental ceramics. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cyp1a-dependent activation of xenobiotics in endothelial linings of the chorioallantoic membrane (CAM) in birds

Energy Technology Data Exchange (ETDEWEB)

Annas, A.; Brittebo, E.B. [Uppsala Univ. (Sweden). Dept. of Toxicology; Brunstroem, B. [Dept. of Environmental Toxicology, Uppsala Univ., Uppsala (Sweden)

2000-08-01

Metabolic activation of the heterocyclic amine 3-amino-1,4-dimethyl-5H-pyrido[4,3-b]indole (Trp-P-1) and 7-ethoxyresorufin O-deethylase (EROD) activity were examined in the chorioallantoic membrane (CAM) of 15-day-old chicken and 18-day-old eider duck embryos. The embryos were pretreated with an Ah receptor agonist, i.e. {beta}-naphthoflavone (BNF) or 3,3',4,4',5-pentachlorobiphenyl (PCB 126), or vehicle in ovo. BNF and PCB 126 induced EROD activity and covalent binding of [{sup 3}H]Trp-P-1 seven- to tenfold in the CAM of chicken embryos. In the CAM of eider duck embryos, which are known to be nonresponsive to coplanar PCBs, PCB 126 treatment had no effect on EROD activity or covalent binding of [{sup 3}H]Trp-P-1 whereas BNF treatment increased these activities five- and threefold, respectively. Light microscopic autoradiography was used to identify the cellular localization of covalent binding of [{sup 3}H]Trp-P-1 in the CAM. Preferential binding was observed in endothelial cells in intraepithelial capillaries in the chorionic epithelium and in blood vessels in the mesenchymal layer. The addition of the CYP1A inhibitor ellipticine abolished the covalent binding of [{sup 3}H]Trp-P-1 in the CAM of BNF- and PCB 126-treated chicken and eider duck embryos. The results suggest that CYP1A-dependent metabolic activity can be induced in blood vessel endothelia in the CAM of bird embryos following exposure to Ah receptor agonists and that the CAM may be a target tissue for CYP1A-activated environmental pollutants. Furthermore, the highly vascularized CAM could be used as a model for studies of Ah receptor-mediated alterations in the vasculature. (orig.)

Cyp1a-dependent activation of xenobiotics in endothelial linings of the chorioallantoic membrane (CAM) in birds

International Nuclear Information System (INIS)

Annas, A.; Brittebo, E.B.

2000-01-01

Metabolic activation of the heterocyclic amine 3-amino-1,4-dimethyl-5H-pyrido[4,3-b]indole (Trp-P-1) and 7-ethoxyresorufin O-deethylase (EROD) activity were examined in the chorioallantoic membrane (CAM) of 15-day-old chicken and 18-day-old eider duck embryos. The embryos were pretreated with an Ah receptor agonist, i.e. β-naphthoflavone (BNF) or 3,3',4,4',5-pentachlorobiphenyl (PCB 126), or vehicle in ovo. BNF and PCB 126 induced EROD activity and covalent binding of [ 3 H]Trp-P-1 seven- to tenfold in the CAM of chicken embryos. In the CAM of eider duck embryos, which are known to be nonresponsive to coplanar PCBs, PCB 126 treatment had no effect on EROD activity or covalent binding of [ 3 H]Trp-P-1 whereas BNF treatment increased these activities five- and threefold, respectively. Light microscopic autoradiography was used to identify the cellular localization of covalent binding of [ 3 H]Trp-P-1 in the CAM. Preferential binding was observed in endothelial cells in intraepithelial capillaries in the chorionic epithelium and in blood vessels in the mesenchymal layer. The addition of the CYP1A inhibitor ellipticine abolished the covalent binding of [ 3 H]Trp-P-1 in the CAM of BNF- and PCB 126-treated chicken and eider duck embryos. The results suggest that CYP1A-dependent metabolic activity can be induced in blood vessel endothelia in the CAM of bird embryos following exposure to Ah receptor agonists and that the CAM may be a target tissue for CYP1A-activated environmental pollutants. Furthermore, the highly vascularized CAM could be used as a model for studies of Ah receptor-mediated alterations in the vasculature. (orig.)

ChemCam on MSL 2009: first laser induced breakdown spectrometer for space science

Energy Technology Data Exchange (ETDEWEB)

Wiens, Roger C [Los Alamos National Laboratory

2008-01-01

ChemCam is one of the 10 instrument suites on the Mars Science Laboratory, a martian rover being built by Jet Propulsion Laboratory, for the next NASA mission to Mars (MSL 2009). ChemCam is an instrument package consisting of two remote sensing instruments: a Laser-Induced Breakdown Spectrometer (LIBS) and a Remote Micro-Imager (RMI). LIBS provides elemental compositions of rocks and soils, while the RMI places the LIBS analyses in their geomorphologic context. Both instruments rely on an autofocus capability to precisely focus on the chosen target, located at distances from the rover comprised between 1 and 9 m for LIBS, and 2 m and infinity for RMI. ChemCam will help determine which samples, within the vicinity of the MSL rover, are of sufficient interest to use the contact and in-situ instruments for further characterization. It will provide valuable analyses of samples that are inaccessible to contact and in-situ instruments, and of a much larger number of samples than can be done with this kind of instrument. ChemCam also has a capability to provide passive spectroscopy data of rocks and soils on Mars. ChemCam hardware consists of a Mast Unit (MU), provided by France, and a Body Unit (BU) built and tested in the USA. The Flight Model of the MU is assembled, tested and now available in the USA, while the BU is currently being assembled and tested. Both will be connected by the end of year '08 for end-to-end functional and performance tests, before delivery to JPL and assembly on the MSL rover. Launch is scheduled for October 09. After describing the concept of ChemCam, this presentation focuses on its French part, Mast Unit. The results presented show that Mast Unit is able to generate a plasma and collect its light, over the full applicable ranges of distances and temperatures on Mars.

Comparison of Fit of Dentures Fabricated by Traditional Techniques Versus CAD/CAM Technology.

Science.gov (United States)

McLaughlin, J Bryan; Ramos, Van; Dickinson, Douglas P

2017-11-14

To compare the shrinkage of denture bases fabricated by three methods: CAD/CAM, compression molding, and injection molding. The effect of arch form and palate depth was also tested. Nine titanium casts, representing combinations of tapered, ovoid, and square arch forms and shallow, medium, and deep palate depths, were fabricated using electron beam melting (EBM) technology. For each base fabrication method, three poly(vinyl siloxane) impressions were made from each cast, 27 dentures for each method. Compression-molded dentures were fabricated using Lucitone 199 poly methyl methacrylate (PMMA), and injection molded dentures with Ivobase's Hybrid Pink PMMA. For CAD/CAM, denture bases were designed and milled by Avadent using their Light PMMA. To quantify the space between the denture and the master cast, silicone duplicating material was placed in the intaglio of the dentures, the titanium master cast was seated under pressure, and the silicone was then trimmed and recovered. Three silicone measurements per denture were recorded, for a total of 243 measurements. Each silicone measurement was weighed and adjusted to the surface area of the respective arch, giving an average and standard deviation for each denture. Comparison of manufacturing methods showed a statistically significant difference (p = 0.0001). Using a ratio of the means, compression molding had on average 41% to 47% more space than injection molding and CAD/CAM. Comparison of arch/palate forms showed a statistically significant difference (p = 0.023), with shallow palate forms having more space with compression molding. The ovoid shallow form showed CAD/CAM and compression molding had more space than injection molding. Overall, injection molding and CAD/CAM fabrication methods produced equally well-fitting dentures, with both having a better fit than compression molding. Shallow palates appear to be more affected by shrinkage than medium or deep palates. Shallow ovoid arch forms appear to benefit from

CAMS newly detected meteor showers and the sporadic background

Science.gov (United States)

Jenniskens, P.; Nénon, Q.; Gural, P. S.; Albers, J.; Haberman, B.; Johnson, B.; Morales, R.; Grigsby, B. J.; Samuels, D.; Johannink, C.

2016-03-01

The Cameras for Allsky Meteor Surveillance (CAMS) video-based meteoroid orbit survey adds 60 newly identified showers to the IAU Working List of Meteor Showers (numbers 427, 445-446, 506-507, and part of 643-750). 28 of these are also detected in the independent SonotaCo survey. In total, 230 meteor showers and shower components are identified in CAMS data, 177 of which are detected in at least two independent surveys. From the power-law size frequency distribution of detected showers, we extrapolate that 36% of all CAMS-observed meteors originated from ∼700 showers above the N = 1 per 110,000 shower limit. 71% of mass falling to Earth from streams arrives on Jupiter-family type orbits. The transient Geminids account for another 15%. All meteoroids not assigned to streams form a sporadic background with highest detected numbers from the apex source, but with 98% of mass falling in from the antihelion source. Even at large ∼7-mm sizes, a Poynting-Robertson drag evolved population is detected, which implies that the Grün et al. collisional lifetimes at these sizes are underestimated by about a factor of 10. While these large grains survive collisions, many fade on a 104-y timescale, possibly because they disintegrate into smaller particles by processes other than collisions, leaving a more resilient population to evolve.

Survey on the use of CAD-CAM technology by UK and Irish dental technicians.

Science.gov (United States)

Blackwell, E; Nesbit, M; Petridis, H

2017-05-12

Statement of the problem Digital workflows (CAD/CAM) have been introduced in dentistry during recent years. No published information exists on dental technicians' use and reporting of this technology.Purpose The aim of this cross sectional survey was to identify the extent digital technology has infiltrated the workplace and to investigate the factors affecting the use of CAD-CAM technology by dental laboratory technicians within Ireland and the UK.Materials and methods A web-based questionnaire was composed (Opinio, Object Planet Inc. Oslo, Norway) and distributed to UK and Irish dental technicians. Answers to all questions were anonymous and grouped such that general information was gathered initially, followed by branching of the survey into two sections depending on whether or not the respondent worked with CAD-CAM technology. Results were compiled and statistical analysis (Fisher's Exact test, SPSS, IBM, Armonk, New York, USA) was performed in order to investigate any correlation between various demographic variables and the answers provided.Results The survey was distributed to 760 UK technicians and 77 Irish technicians. The total number of completed surveys was 105, which yielded a total response rate of 14%. Most technicians reported using some form of CAD/CAM aspect in the workflow, and this was more significant for technicians working in large laboratories. Most training received was company-led. Large laboratories were also significantly correlated with less outsourcing of CAD/CAM work and a change in dental material use leading to the increase of zirconia and the decrease of noble alloys. Dental technicians did not report any significant change in working relationships and staffing as a result of CAD/CAM incorporation. High initial investment cost was the most common reason quoted from non-users, along with the lack of such technology in their working environment.

The role of complementary and alternative medicine (CAM) routines and rituals in men with cancer and their significant others (SOs): a qualitative investigation.

Science.gov (United States)

Klafke, Nadja; Eliott, Jaklin A; Olver, Ian N; Wittert, Gary A

2014-05-01

Complementary and alternative medicine (CAM) is frequently used in cancer patients, often with contribution of the significant others (SOs), but without consultation of healthcare professionals. This research explored how cancer patients integrate and maintain CAM use in their everyday life, and how SOs are involved in it. In this qualitative study, male participants were selected from a preceding Australian survey on CAM use in men with cancer (94 % response rate and 86 % consent rate for follow-up interview). Semistructured interviews were conducted with 26 men and 24 SOs until data saturation was reached. Interview transcripts were coded and analyzed thematically, thereby paying close attention to participants' language in use. A major theme associated with high CAM use was "CAM routines and rituals," as it was identified that men with cancer practiced CAM as (1) functional routines, (2) meaningful rituals, and (3) mental/spiritual routines or/and rituals. Regular CAM use was associated with intrapersonal and interpersonal benefits: CAM routines provided men with certainty and control, and CAM rituals functioned for cancer patients and their SOs as a means to create meaning, thereby working to counter fear and uncertainty consequent upon a diagnosis of cancer. SOs contributed most to men's uptake and maintenance of dietary-based CAM in ritualistic form resulting in interpersonal bonding and enhanced closeness. CAM routines and rituals constitute key elements in cancer patients' regular and satisfied CAM use, and they promote familial strengthening. Clinicians and physicians can convey these benefits to patient consultations, further promoting the safe and effective use of CAM.

“We make choices we think are going to save us”: Debate and stance identification for online breast cancer CAM discussions

Science.gov (United States)

Zhang, Shaodian; Qiu, Lin; Chen, Frank; Zhang, Weinan; Yu, Yong; Elhadad, Noémie

2017-01-01

Patients discuss complementary and alternative medicine (CAM) in online health communities. Sometimes, patients’ conflicting opinions toward CAM-related issues trigger debates in the community. The objectives of this paper are to identify such debates, identify controversial CAM therapies in a popular online breast cancer community, as well as patients’ stances towards them. To scale our analysis, we trained a set of classifiers. We first constructed a supervised classifier based on a long short-term memory neural network (LSTM) stacked over a convolutional neural network (CNN) to detect automatically CAM-related debates from a popular breast cancer forum. Members’ stances in these debates were also identified by a CNN-based classifier. Finally, posts automatically flagged as debates by the classifier were analyzed to explore which specific CAM therapies trigger debates more often than others. Our methods are able to detect CAM debates with F score of 77%, and identify stances with F score of 70%. The debate classifier identified about 1/6 of all CAM-related posts as debate. About 60% of CAM-related debate posts represent the supportive stance toward CAM usage. Qualitative analysis shows that some specific therapies, such as Gerson therapy and usage of laetrile, trigger debates frequently among members of the breast cancer community. This study demonstrates that neural networks can effectively locate debates on usage and effectiveness of controversial CAM therapies, and can help make sense of patients’ opinions on such issues under dispute. As to CAM for breast cancer, perceptions of their effectiveness vary among patients. Many of the specific therapies trigger debates frequently and are worth more exploration in future work. PMID:28967000

Influence of different surface treatments on bond strength of novel CAD/CAM restorative materials to resin cement.

Science.gov (United States)

Kömürcüoğlu, Meltem Bektaş; Sağırkaya, Elçin; Tulga, Ayça

2017-12-01

To evaluate the effects of different surface treatments on the bond strength of novel CAD/CAM restorative materials to resin cement by four point bending test. The CAD/CAM materials under investigation were e.max CAD, Mark II, Lava Ultimate, and Enamic. A total of 400 bar specimens (4×1.2×12 mm) (n=10) milled from the CAD/CAM blocks underwent various pretreatments (no pretreatment (C), hydrofluoric acid (A), hydrofluoric acid + universal adhesive (Scotchbond) (AS), sandblasting (Sb), and sandblasting + universal adhesive (SbS)). The bars were luted end-to-end on the prepared surfaces with a dual curing adhesive resin cement (Variolink N, Ivoclar Vivadent) on the custom-made stainless steel mold. Ten test specimens for each treatment and material combination were performed with four point bending test method. Data were analyzed using ANOVA and Tukey's test. The surface treatment and type of CAD/CAM restorative material showed a significant effect on the four point bending strength (FPBS) ( P CAD/CAM restorative materials was modified after treatments. The surface treatment of sandblasting or HF acid etching in combination with a universal adhesive containing MDP can be suggested for the adhesive cementation of the novel CAD/CAM restorative materials.

Product design and development for dinner chair of Kansei Engineering

OpenAIRE

Sirichai Yodwangjai

2014-01-01

This research investigated the customer’s perception and product properties. The semantic differential method was employed to examine the relationship between customer’s perception and product properties. Fifty-six dinner chairs are selected from website, magazine and publishing and 10 SD words. The product properties divided 8 groups and 34 sub-groups. The new model created base on Quantification Theory Type 1. The research results show 3 high perceptions: comfortable, soft and modern. The r...

Use of selected complementary and alternative medicine (CAM) treatments in veterans with cancer or chronic pain: a cross-sectional survey

OpenAIRE

McEachrane-Gross, F Patricia; Liebschutz, Jane M; Berlowitz, Dan

2006-01-01

Abstract Background Complementary and alternative medicine (CAM) is emerging as an important form of care in the United States. We sought to measure the prevalence of selected CAM use among veterans attending oncology and chronic pain clinics and to describe the characteristics of CAM use in this population. Methods The self-administered, mail-in survey included questions on demographics, health beliefs, medical problems and 6 common CAM treatments (herbs, dietary supplements, chiropractic ca...

Overexpression of HepaCAM inhibits cell viability and motility through suppressing nucleus translocation of androgen receptor and ERK signaling in prostate cancer.

Science.gov (United States)

Song, Xuedong; Wang, Yin; Du, Hongfei; Fan, Yanru; Yang, Xue; Wang, Xiaorong; Wu, Xiaohou; Luo, Chunli

2014-07-01

HepaCAM is suppressed in a variety of human cancers, and involved in cell adhesion, growth, migration, invasion, and survival. However, the expression and function of HepaCAM in prostate cancer are still unknown. HepaCAM expression has been detected by RT-PCR, Western blotting and immunohistochemistry staining in prostate cell lines RWPE-1, LNCap, DU145, PC3, and in 75 human prostate tissue specimens, respectively. Meanwhile, the cell proliferation ability was detected by WST-8 assay. The role of HepaCAM in prostate cancer cell migration and invasion was examined by wound healing and transwell assay. And flow cytometry was used to observe the apoptosis of prostate cancer cells. Then we detected changes of Androgen Receptor translocation and ERK signaling using immunofluorescence staining and western blot after overexpression of HepaCAM. The HepaCAM expression was significantly down-regulated in prostate cancer tissues and undetected in prostate cancer cells. However, the low HepaCAM expression was not statistically associated with clinicopathological characteristics of prostate cancer. Overexpression of HepaCAM in prostate cancer cells decreased the cell proliferation, migration and invasion, and induced the cell apoptosis. Meanwhile, HepaCAM prevented the androgen receptor translocation from the cytoplasm to the nucleus and down-regulated the MAPK/ERK signaling. Our results suggested that HepaCAM acted as a tumor suppressor in prostate cancer. HepaCAM inhibited cell viability and motility which might be through suppressing the nuclear translocation of Androgen Receptor and down-regulating the ERK signaling. Therefore, it was indicated that HepaCAM may be a potential therapeutic target for prostate cancer. © 2014 Wiley Periodicals, Inc.

Fracture analysis of CAD-CAM high-density polymers used for interim implant-supported fixed, cantilevered prostheses.

Science.gov (United States)

Yilmaz, Burak; Alp, Gülce; Seidt, Jeremy; Johnston, William M; Vitter, Roger; McGlumphy, Edwin A

2018-01-06

The load-to-fracture performance of computer-assisted design and computer-assisted manufacturing (CAD-CAM) high-density polymer (HDP) materials in cantilevers is unknown. The purposes of this in vitro study were to evaluate the load-to-fracture performance of CAD-CAM-fabricated HDPs and to compare that with performance of autopolymerized and injection-molded acrylic resins. Specimens from 8 different brands of CAD-CAM HDPs, including Brylic Solid (BS); Brylic Gradient (BG); AnaxCAD Temp EZ (AE); AnaxCAD Temp Plus (AP); Zirkonzahn Temp Basic (Z); GDS Tempo-CAD (GD); Polident (Po); Merz M-PM-Disc (MAT); an autopolymerized acrylic resin, Imident (Conv) and an injection-molded acrylic resin, SR-IvoBase High Impact (Inj) were evaluated for load-to-fracture analysis (n=5). CAD-CAM specimens were milled from poly(methyl methacrylate) (PMMA) blocks measuring 7 mm in buccolingual width, 8 mm in occlusocervical thickness, and 30 mm in length. A wax pattern was prepared in the same dimensions used for CAD-CAM specimens, flasked, and boiled out. Autopolymerizing acrylic resin was packed and polymerized in a pressure container for 30 minutes. An identical wax pattern was flasked and boiled out, and premeasured capsules were injected (SR-IvoBase) and polymerized under hydraulic pressure for 35 minutes for the injection-molded PMMA. Specimens were thermocycled 5000 times (5°C to 55°C) and fixed to a universal testing machine to receive static loads on the 10-mm cantilever, vertically at a 1 mm/min crosshead speed until fracture occurred. Maximum load-to-fracture values were recorded. ANOVA was used to analyze the maximum force values. Significant differences among materials were analyzed by using the Ryan-Einot-Gabriel-Welsch multiple range test (α=.05). Statistically significant differences were found among load-to-fracture values of different HDPs (PCAD-CAM polymer. GD and Po CAD-CAM materials had the highest load-to-fracture values. AE, AP, Z, MAT, and BS CAD-CAM polymers

Correlation between citric acid and nitrate metabolisms during CAM cycle in the atmospheric bromeliad Tillandsia pohliana.

Science.gov (United States)

Freschi, Luciano; Rodrigues, Maria Aurineide; Tiné, Marco Aurélio Silva; Mercier, Helenice

2010-12-15

Crassulacean acid metabolism (CAM) confers crucial adaptations for plants living under frequent environmental stresses. A wide metabolic plasticity can be found among CAM species regarding the type of storage carbohydrate, organic acid accumulated at night and decarboxylating system. Consequently, many aspects of the CAM pathway control are still elusive while the impact of this photosynthetic adaptation on nitrogen metabolism has remained largely unexplored. In this study, we investigated a possible link between the CAM cycle and the nitrogen assimilation in the atmospheric bromeliad Tillandsia pohliana by simultaneously characterizing the diel changes in key enzyme activities and metabolite levels of both organic acid and nitrate metabolisms. The results revealed that T. pohliana performed a typical CAM cycle in which phosphoenolpyruvate carboxylase and phosphoenolpyruvate carboxykinase phosphorylation seemed to play a crucial role to avoid futile cycles of carboxylation and decarboxylation. Unlike all other bromeliads previously investigated, almost equimolar concentrations of malate and citrate were accumulated at night. Moreover, a marked nocturnal depletion in the starch reservoirs and an atypical pattern of nitrate reduction restricted to the nighttime were also observed. Since reduction and assimilation of nitrate requires a massive supply of reducing power and energy and considering that T. pohliana lives overexposed to the sunlight, we hypothesize that citrate decarboxylation might be an accessory mechanism to increase internal CO₂ concentration during the day while its biosynthesis could provide NADH and ATP for nocturnal assimilation of nitrate. Therefore, besides delivering photoprotection during the day, citrate might represent a key component connecting both CAM pathway and nitrogen metabolism in T. pohliana; a scenario that certainly deserves further study not only in this species but also in other CAM plants that nocturnally accumulate citrate

Gamma Ray Imaging System (GRIS) GammaCam trademark. Final report, January 3, 1994 - May 31, 1996

International Nuclear Information System (INIS)

1996-01-01

This report describes the activities undertaken during the development of the Gamma Ray Imaging System (GRIS) program now referred to as the GammaCam trademark. The purpose of this program is to develop a 2-dimensional imaging system for gamma-ray energy scenes that may be present in nuclear power plants. The report summarizes the overall accomplishments of the program and the most recent GammaCam measurements made at LANL and Estonia. The GammaCam is currently available for sale from AIL Systems as an off-the-shelf instrument

Surgical hip dislocation for treatment of cam femoroacetabular impingement

Directory of Open Access Journals (Sweden)

Milind M Chaudhary

2015-01-01

Conclusion: Cam femoroacetabular Impingement causing pain and limitation of hip movements was treated by open osteochondroplasty after surgical hip dislocation. This reduced pain, improved hip motion and gave good to excellent results in the short term.

Soil Diversity and Hydration as Observed by ChemCam at Gale Crater, Mars

Science.gov (United States)

Meslin, P.-Y.; Gasnault, O.; Forni, O.; Schröder, S.; Cousin, A.; Berger, G.; Clegg, S. M.; Lasue, J.; Maurice, S.; Sautter, V.; Le Mouélic, S.; Wiens, R. C.; Fabre, C.; Goetz, W.; Bish, D.; Mangold, N.; Ehlmann, B.; Lanza, N.; Harri, A.-M.; Anderson, R.; Rampe, E.; McConnochie, T. H.; Pinet, P.; Blaney, D.; Léveillé, R.; Archer, D.; Barraclough, B.; Bender, S.; Blake, D.; Blank, J. G.; Bridges, N.; Clark, B. C.; DeFlores, L.; Delapp, D.; Dromart, G.; Dyar, M. D.; Fisk, M.; Gondet, B.; Grotzinger, J.; Herkenhoff, K.; Johnson, J.; Lacour, J.-L.; Langevin, Y.; Leshin, L.; Lewin, E.; Madsen, M. B.; Melikechi, N.; Mezzacappa, A.; Mischna, M. A.; Moores, J. E.; Newsom, H.; Ollila, A.; Perez, R.; Renno, N.; Sirven, J.-B.; Tokar, R.; de la Torre, M.; d'Uston, L.; Vaniman, D.; Yingst, A.; Kemppinen, Osku; Minitti, Michelle; Cremers, David; Bell, James F.; Edgar, Lauren; Farmer, Jack; Godber, Austin; Wadhwa, Meenakshi; Wellington, Danika; McEwan, Ian; Newman, Claire; Richardson, Mark; Charpentier, Antoine; Peret, Laurent; King, Penelope; Weigle, Gerald; Schmidt, Mariek; Li, Shuai; Milliken, Ralph; Robertson, Kevin; Sun, Vivian; Baker, Michael; Edwards, Christopher; Farley, Kenneth; Griffes, Jennifer; Miller, Hayden; Newcombe, Megan; Pilorget, Cedric; Rice, Melissa; Siebach, Kirsten; Stack, Katie; Stolper, Edward; Brunet, Claude; Hipkin, Victoria; Marchand, Geneviève; Sánchez, Pablo Sobrón; Favot, Laurent; Cody, George; Steele, Andrew; Flückiger, Lorenzo; Lees, David; Nefian, Ara; Martin, Mildred; Gailhanou, Marc; Westall, Frances; Israël, Guy; Agard, Christophe; Baroukh, Julien; Donny, Christophe; Gaboriaud, Alain; Guillemot, Philippe; Lafaille, Vivian; Lorigny, Eric; Paillet, Alexis; Pérez, René; Saccoccio, Muriel; Yana, Charles; Armiens-Aparicio, Carlos; Rodríguez, Javier Caride; Blázquez, Isaías Carrasco; Gómez, Felipe Gómez; Gómez-Elvira, Javier; Hettrich, Sebastian; Malvitte, Alain Lepinette; Jiménez, Mercedes Marín; Martínez-Frías, Jesús; Martín-Soler, Javier; Martín-Torres, F. Javier; Jurado, Antonio Molina; Mora-Sotomayor, Luis; Caro, Guillermo Muñoz; López, Sara Navarro; Peinado-González, Verónica; Pla-García, Jorge; Manfredi, José Antonio Rodriguez; Romeral-Planelló, Julio José; Fuentes, Sara Alejandra Sans; Martinez, Eduardo Sebastian; Redondo, Josefina Torres; Urqui-O'Callaghan, Roser; Mier, María-Paz Zorzano; Chipera, Steve; Mauchien, Patrick; Manning, Heidi; Fairén, Alberto; Hayes, Alexander; Joseph, Jonathan; Squyres, Steven; Sullivan, Robert; Thomas, Peter; Dupont, Audrey; Lundberg, Angela; DeMarines, Julia; Grinspoon, David; Reitz, Günther; Prats, Benito; Atlaskin, Evgeny; Genzer, Maria; Haukka, Harri; Kahanpää, Henrik; Kauhanen, Janne; Kemppinen, Osku; Paton, Mark; Polkko, Jouni; Schmidt, Walter; Siili, Tero; Wray, James; Wilhelm, Mary Beth; Poitrasson, Franck; Patel, Kiran; Gorevan, Stephen; Indyk, Stephen; Paulsen, Gale; Gupta, Sanjeev; Schieber, Juergen; Geffroy, Claude; Baratoux, David; Cros, Alain; Lee, Qiu-Mei; Pallier, Etienne; Parot, Yann; Toplis, Mike; Brunner, Will; Heydari, Ezat; Achilles, Cherie; Oehler, Dorothy; Sutter, Brad; Cabane, Michel; Coscia, David; Israël, Guy; Szopa, Cyril; Robert, François; Nachon, Marion; Buch, Arnaud; Stalport, Fabien; Coll, Patrice; François, Pascaline; Raulin, François; Teinturier, Samuel; Cameron, James; Dingler, Robert; Jackson, Ryan Steele; Johnstone, Stephen; Little, Cynthia; Nelson, Tony; Williams, Richard B.; Jones, Andrea; Kirkland, Laurel; Treiman, Allan; Baker, Burt; Cantor, Bruce; Caplinger, Michael; Davis, Scott; Duston, Brian; Edgett, Kenneth; Fay, Donald; Hardgrove, Craig; Harker, David; Herrera, Paul; Jensen, Elsa; Kennedy, Megan R.; Krezoski, Gillian; Krysak, Daniel; Lipkaman, Leslie; Malin, Michael; McCartney, Elaina; McNair, Sean; Nixon, Brian; Posiolova, Liliya; Ravine, Michael; Salamon, Andrew; Saper, Lee; Stoiber, Kevin; Supulver, Kimberley; Van Beek, Jason; Van Beek, Tessa; Zimdar, Robert; French, Katherine Louise; Iagnemma, Karl; Miller, Kristen; Summons, Roger; Goesmann, Fred; Hviid, Stubbe; Johnson, Micah; Lefavor, Matthew; Lyness, Eric; Breves, Elly; Fassett, Caleb; Bristow, Thomas; DesMarais, David; Edwards, Laurence; Haberle, Robert; Hoehler, Tori; Hollingsworth, Jeff; Kahre, Melinda; Keely, Leslie; McKay, Christopher; Wilhelm, Mary Beth; Bleacher, Lora; Brinckerhoff, William; Choi, David; Conrad, Pamela; Dworkin, Jason P.; Eigenbrode, Jennifer; Floyd, Melissa; Freissinet, Caroline; Garvin, James; Glavin, Daniel; Harpold, Daniel; Jones, Andrea; Mahaffy, Paul; Martin, David K.; McAdam, Amy; Pavlov, Alexander; Raaen, Eric; Smith, Michael D.; Stern, Jennifer; Tan, Florence; Trainer, Melissa; Meyer, Michael; Posner, Arik; Voytek, Mary; Anderson, Robert C.; Aubrey, Andrew; Beegle, Luther W.; Behar, Alberto; Brinza, David; Calef, Fred; Christensen, Lance; Crisp, Joy A.; Feldman, Jason; Feldman, Sabrina; Flesch, Gregory; Hurowitz, Joel; Jun, Insoo; Keymeulen, Didier; Maki, Justin; Morookian, John Michael; Parker, Timothy; Pavri, Betina; Schoppers, Marcel; Sengstacken, Aaron; Simmonds, John J.; Spanovich, Nicole; Vasavada, Ashwin R.; Webster, Christopher R.; Yen, Albert; Cucinotta, Francis; Jones, John H.; Ming, Douglas; Morris, Richard V.; Niles, Paul; Nolan, Thomas; Radziemski, Leon; Berman, Daniel; Dobrea, Eldar Noe; Williams, Rebecca M. E.; Lewis, Kevin; Cleghorn, Timothy; Huntress, Wesley; Manhès, Gérard; Hudgins, Judy; Olson, Timothy; Stewart, Noel; Sarrazin, Philippe; Grant, John; Vicenzi, Edward; Wilson, Sharon A.; Bullock, Mark; Ehresmann, Bent; Hamilton, Victoria; Hassler, Donald; Peterson, Joseph; Rafkin, Scot; Zeitlin, Cary; Fedosov, Fedor; Golovin, Dmitry; Karpushkina, Natalya; Kozyrev, Alexander; Litvak, Maxim; Malakhov, Alexey; Mitrofanov, Igor; Mokrousov, Maxim; Nikiforov, Sergey; Prokhorov, Vasily; Sanin, Anton; Tretyakov, Vladislav; Varenikov, Alexey; Vostrukhin, Andrey; Kuzmin, Ruslan; Wolff, Michael; McLennan, Scott; Botta, Oliver; Drake, Darrell; Bean, Keri; Lemmon, Mark; Schwenzer, Susanne P.; Lee, Ella Mae; Sucharski, Robert; Hernández, Miguel Ángel de Pablo; Ávalos, Juan José Blanco; Ramos, Miguel; Kim, Myung-Hee; Malespin, Charles; Plante, Ianik; Muller, Jan-Peter; Navarro-González, Rafael; Ewing, Ryan; Boynton, William; Downs, Robert; Fitzgibbon, Mike; Harshman, Karl; Morrison, Shaunna; Dietrich, William; Kortmann, Onno; Palucis, Marisa; Sumner, Dawn Y.; Williams, Amy; Lugmair, Günter; Wilson, Michael A.; Rubin, David; Jakosky, Bruce; Balic-Zunic, Tonci; Frydenvang, Jens; Jensen, Jaqueline Kløvgaard; Kinch, Kjartan; Koefoed, Asmus; Stipp, Susan Louise Svane; Boyd, Nick; Campbell, John L.; Gellert, Ralf; Perrett, Glynis; Pradler, Irina; VanBommel, Scott; Jacob, Samantha; Owen, Tobias; Rowland, Scott; Atlaskin, Evgeny; Savijärvi, Hannu; Boehm, Eckart; Böttcher, Stephan; Burmeister, Sönke; Guo, Jingnan; Köhler, Jan; García, César Martín; Mueller-Mellin, Reinhold; Wimmer-Schweingruber, Robert; Bridges, John C.; Benna, Mehdi; Franz, Heather; Bower, Hannah; Brunner, Anna; Blau, Hannah; Boucher, Thomas; Carmosino, Marco; Atreya, Sushil; Elliott, Harvey; Halleaux, Douglas; Rennó, Nilton; Wong, Michael; Pepin, Robert; Elliott, Beverley; Spray, John; Thompson, Lucy; Gordon, Suzanne; Williams, Joshua; Vasconcelos, Paulo; Bentz, Jennifer; Nealson, Kenneth; Popa, Radu; Kah, Linda C.; Moersch, Jeffrey; Tate, Christopher; Day, Mackenzie; Kocurek, Gary; Hallet, Bernard; Sletten, Ronald; Francis, Raymond; McCullough, Emily; Cloutis, Ed; ten Kate, Inge Loes; Kuzmin, Ruslan; Arvidson, Raymond; Fraeman, Abigail; Scholes, Daniel; Slavney, Susan; Stein, Thomas; Ward, Jennifer; Berger, Jeffrey

2013-09-01

The ChemCam instrument, which provides insight into martian soil chemistry at the submillimeter scale, identified two principal soil types along the Curiosity rover traverse: a fine-grained mafic type and a locally derived, coarse-grained felsic type. The mafic soil component is representative of widespread martian soils and is similar in composition to the martian dust. It possesses a ubiquitous hydrogen signature in ChemCam spectra, corresponding to the hydration of the amorphous phases found in the soil by the CheMin instrument. This hydration likely accounts for an important fraction of the global hydration of the surface seen by previous orbital measurements. ChemCam analyses did not reveal any significant exchange of water vapor between the regolith and the atmosphere. These observations provide constraints on the nature of the amorphous phases and their hydration.

Soil diversity and hydration as observed by ChemCam at Gale crater, Mars

Science.gov (United States)

Meslin, P.-Y.; Gasnault, O.; Forni, O.; Schroder, S.; Cousin, A.; Berger, G.; Clegg, S.M.; Lasue, J.; Maurice, S.; Sautter, V.; Le Mouélic, S.; Wiens, R.C.; Fabre, C.; Goetz, W.; Bish, D.L.; Mangold, N.; Ehlmann, B.; Lanza, N.; Harri, A.-M.; Anderson, Ryan Bradley; Rampe, E.; McConnochie, T.H.; Pinet, P.; Blaney, D.; ,; Archer, D.; Barraclough, B.; Bender, S.; Blake, D.; Blank, J.G.; Bridges, N.; Clark, B. C.; DeFlores, L.; Delapp, D.; Dromart, G.; Dyar, M.D.; Fisk, M. R.; Gondet, B.; Grotzinger, J.; Herkenhoff, K.; Johnson, J.; Lacour, J.-L.; Langevin, Y.; Leshin, L.; Lewin, E.; Madsen, M.B.; Melikechi, N.; Mezzacappa, Alissa; Mischna, M.A.; Moores, J.E.; Newsom, H.; Ollila, A.; ,; Renno, N.; Sirven, J.B.; Tokar, R.; de la Torre, M.; d'Uston, L.; Vaniman, D.; Yingst, A.

2013-01-01

The ChemCam instrument, which provides insight into martian soil chemistry at the submillimeter scale, identified two principal soil types along the Curiosity rover traverse: a fine-grained mafic type and a locally derived, coarse-grained felsic type. The mafic soil component is representative of widespread martian soils and is similar in composition to the martian dust. It possesses a ubiquitous hydrogen signature in ChemCam spectra, corresponding to the hydration of the amorphous phases found in the soil by the CheMin instrument. This hydration likely accounts for an important fraction of the global hydration of the surface seen by previous orbital measurements. ChemCam analyses did not reveal any significant exchange of water vapor between the regolith and the atmosphere. These observations provide constraints on the nature of the amorphous phases and their hydration.

The effect of nitrogen availability and water conditions on competition between a facultative CAM plant and an invasive grass.

Science.gov (United States)

Yu, Kailiang; D'Odorico, Paolo; Carr, David E; Personius, Ashden; Collins, Scott L

2017-10-01

Plants with crassulacean acid metabolism (CAM) are increasing their abundance in drylands worldwide. The drivers and mechanisms underlying the increased dominance of CAM plants and CAM expression (i.e., nocturnal carboxylation) in facultative CAM plants, however, remain poorly understood. We investigated how nutrient and water availability affected competition between Mesembryanthemum crystallinum (a model facultative CAM species) and the invasive C 3 grass Bromus mollis that co-occur in California's coastal grasslands. Specifically we investigated the extent to which water stress, nutrients, and competition affect nocturnal carboxylation in M. crystallinum . High nutrient and low water conditions favored M. crystallinum over B. mollis , in contrast to high water conditions. While low water conditions induced nocturnal carboxylation in 9-week-old individuals of M. crystallinum , in these low water treatments, a 66% reduction in nutrient applied over the entire experiment did not further enhance nocturnal carboxylation. In high water conditions M. crystallinum both alone and in association with B. mollis did not perform nocturnal carboxylation, regardless of the nutrient levels. Thus, nocturnal carboxylation in M. crystallinum was restricted by strong competition with B. mollis in high water conditions. This study provides empirical evidence of the competitive advantage of facultative CAM plants over grasses in drought conditions and of the restricted ability of M. crystallinum to use their photosynthetic plasticity (i.e., ability to switch to CAM behavior) to compete with grasses in well-watered conditions. We suggest that a high drought tolerance could explain the increased dominance of facultative CAM plants in a future environment with increased drought and nitrogen deposition, while the potential of facultative CAM plants such as M. crystallinum to expand to wet environments is expected to be limited.

Cam Femoroacetabular Impingement as a Possible Explanation of Recalcitrant Anterior Knee Pain

OpenAIRE

Sanchis-Alfonso, Vicente; Tey, Marc; Monllau, Joan Carles

2016-01-01

We present a case of a patient with chronic anterior knee pain (AKP) recalcitrant to conservative treatment who returned to our office for severe hip pain secondary to Cam femoroacetabular impingement (Cam FAI) at 10 months after the onset of knee pain. This case highlights the fact that the main problem is not in the patella but in the hip in some patients with AKP. We hypothesize that there is an external femoral rotation in order to avoid the impingement and therefore the hip pain in patie...

Multiple C-terminal tail Ca(2+)/CaMs regulate Ca(V)1.2 function but do not mediate channel dimerization.

Science.gov (United States)

Kim, Eun Young; Rumpf, Christine H; Van Petegem, Filip; Arant, Ryan J; Findeisen, Felix; Cooley, Elizabeth S; Isacoff, Ehud Y; Minor, Daniel L

2010-12-01

Interactions between voltage-gated calcium channels (Ca(V)s) and calmodulin (CaM) modulate Ca(V) function. In this study, we report the structure of a Ca(2+)/CaM Ca(V)1.2 C-terminal tail complex that contains two PreIQ helices bridged by two Ca(2+)/CaMs and two Ca(2+)/CaM-IQ domain complexes. Sedimentation equilibrium experiments establish that the complex has a 2:1 Ca(2+)/CaM:C-terminal tail stoichiometry and does not form higher order assemblies. Moreover, subunit-counting experiments demonstrate that in live cell membranes Ca(V)1.2s are monomers. Thus, contrary to previous proposals, the crystallographic dimer lacks physiological relevance. Isothermal titration calorimetry and biochemical experiments show that the two Ca(2+)/CaMs in the complex have different properties. Ca(2+)/CaM bound to the PreIQ C-region is labile, whereas Ca(2+)/CaM bound to the IQ domain is not. Furthermore, neither of lobes of apo-CaM interacts strongly with the PreIQ domain. Electrophysiological studies indicate that the PreIQ C-region has a role in calcium-dependent facilitation. Together, the data show that two Ca(2+)/CaMs can bind the Ca(V)1.2 tail simultaneously and indicate a functional role for Ca(2+)/CaM at the C-region site.

Light irradiance through novel CAD-CAM block materials and degree of conversion of composite cements.

Science.gov (United States)

Lise, Diogo Pedrollo; Van Ende, Annelies; De Munck, Jan; Yoshihara, Kumiko; Nagaoka, Noriyuki; Cardoso Vieira, Luiz Clovis; Van Meerbeek, Bart

2018-02-01

To assess light irradiance (LI) delivered by two light-curing units (LCU's) and to measure the degree of conversion (DC) of three composite cements, when cured through different thicknesses of two novel CAD-CAM block materials. 100-μm-thick films of a dual-curable composite cement (G-CEM LinkAce, GC), a light-curable flowable resin-based composite (RBC) (G-ænial Universal Flo, GC) and a micro-hybrid RBC (G-ænial Posterior, GC) were investigated as luting agents. Two 'polymer-ceramic' CAD-CAM blocks (Cerasmart, GC; Enamic, Vita Zahnfabrik) were sectioned in slabs with different thicknesses (1, 3 and 5mm). LI at the bottom of the specimens was measured using a calibrated spectrometer, while being light-cured through the CAD-CAM block slabs for 40s with a low- (±500mW/cm 2 ) or high- (±1,600mW/cm 2 ) irradiance LCU (n=5). After light-curing, micro-Raman spectra of the composite films were acquired to determine DC at 5min, 10min, 1h and 24h. LI data were statistically analyzed by Kruskal-Wallis followed by post-hoc comparisons, while a linear mixed-effect model was applied for the DC analysis. In addition, the CAD-CAM blocks ultrastructure was characterized upon argon-ion slicing using scanning transmission electron microscopy (STEM). Finally, light transmission (LT) through each CAD-CAM block material was assessed using a spectrophotometer. Curing-light attenuation and DC were significantly influenced by thickness and type of the overlying material. LCU only had a significant effect on DC of the micro-hybrid RBC. DC significantly increased over time for all composite cements. CAD-CAM block structural analysis revealed a relatively small and homogenous filler configuration (mean filler size of 0.2-0.5μm) for Cerasmart, while Enamic contained ceramic grains varying in shape and size (1-10μm), which were interconnected by the polymer-based network. LT was much higher at a wavelength range of 300-800nm for Cerasmart than for Enamic. Light-curable composite cements

Bad Enough Ergonomics: A Case Study of an Office Chair

OpenAIRE

Peteri, Virve

2017-01-01

The article analyzes ergonomics as a social and cultural phenomenon, as something that is formulated and described by speakers in a specific social context; in a company that is specialized in producing ergonomic office furniture. Through a case study of an office chair, the article examines how ergonomics and its association with the vision of the potential users and their working spaces are constructed by the relevant actors in project meetings and individual interviews during the manufactu...

Influence of different surface treatments on bond strength of novel CAD/CAM restorative materials to resin cement

Science.gov (United States)

Kömürcüoğlu, Meltem Bektaş; Sağırkaya, Elçin

2017-01-01

PURPOSE To evaluate the effects of different surface treatments on the bond strength of novel CAD/CAM restorative materials to resin cement by four point bending test. MATERIALS AND METHODS The CAD/CAM materials under investigation were e.max CAD, Mark II, Lava Ultimate, and Enamic. A total of 400 bar specimens (4×1.2×12 mm) (n=10) milled from the CAD/CAM blocks underwent various pretreatments (no pretreatment (C), hydrofluoric acid (A), hydrofluoric acid + universal adhesive (Scotchbond) (AS), sandblasting (Sb), and sandblasting + universal adhesive (SbS)). The bars were luted end-to-end on the prepared surfaces with a dual curing adhesive resin cement (Variolink N, Ivoclar Vivadent) on the custom-made stainless steel mold. Ten test specimens for each treatment and material combination were performed with four point bending test method. Data were analyzed using ANOVA and Tukey's test. RESULTS The surface treatment and type of CAD/CAM restorative material showed a significant effect on the four point bending strength (FPBS) (Pcementation of the novel CAD/CAM restorative materials. PMID:29279763

Gamming Chairs and Gimballed Beds: Seafaring Women on Board Nineteenth-Century Ships

Science.gov (United States)

Seaborn, Laurel

2017-04-01

During the nineteenth century, many captains' wives from New England took up residence on the ships their husbands commanded. This article focuses on how those women at sea attempted to use material culture to domesticate their voyaging space. While writing in their journals, they referred to not only the small personal things such as books and knitting needles that they brought in their trunks, but also large items, built for and used by women, such as gamming chairs, deckhouses, parlor organs, sewing machines, and gimballed beds. Mary Brewster attempted to retreat from the ship's officers in her small deckhouse, Annie Brassey slept in the gimballed bed, and Lucy Lord Howes disembarked in a gamming chair when captured by Confederates during the Civil War. Evidence of these artifacts found during shipwreck archaeology could be used to further what is known of the culture aboard ships on which women lived. Analysis of the material culture reveals how a captain's wife domesticated space, altered her environment, and made a home on the ship for her family.

Career development needs of vice chairs for education in departments of surgery.

Science.gov (United States)

Sanfey, Hilary; Boehler, Margaret; Darosa, Debra; Dunnington, Gary L

2012-01-01

To identify the career development needs Vice Chair for Education in Surgery Departments (VCESDs). In all, 33 VCESDs were invited to complete an online survey to identify the scope of duties, scholarly activity, job satisfaction, and career development needs. A total of 29/33 (88%) VCESDs responded. Time constraints were the most frequent impediment for MDs vs. PhDs (p teacher programs (1 ± 0), and program performance evaluation systems (1.33 ± 0.76) for PhDs. The skills deemed to be of greatest importance were ability to communicate effectively (1.27 ± 0.55), resolve personnel conflicts (1.32 ± 0.57), and introduce change (1.41 ± 0.59). PhDs revealed a greater need to learn strategies for dealing with disruptive faculty (1.0 ± 0 vs 2.15 ± 0.87). This information will inform the future career development of VCESDs and will assist Department Chairs who wish to recruit and retain VCESDs. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Sulfur Geochemical Analysis and Interpretation with ChemCam on the Curiosity Rover

Science.gov (United States)

Clegg, S. M.; Anderson, R. B.; Frydenvang, J.; Forni, O.; Newsom, H. E.; Blaney, D. L.; Maurice, S.; Wiens, R. C.

2017-12-01

The Curiosity rover has encountered many forms of sulfur including calcium sulfate veins [1], hydrated Mg sulfates, and Fe sulfates along the traverse through Gale crater. A new SO3 calibration model for the remote Laser-Induced Breakdown Spectroscopy (LIBS) technique used by the ChemCam instrument enables improved quantitative analysis of SO3, which has not been previously reported by ChemCam on a routine or quantitative basis. In this paper, the details of this new LIBS calibration model will be described and applied to many disparate Mars targets. Among them, Mavor contains a calcium sulfate vein surrounded by bedrock. In contrast, Jake M. is a float rock, Wernecke is a bedrock, Cumberland and Windjana are drill targets. In 2015 the ChemCam instrument team completed a re-calibration of major elements based on a significantly expanded set of >500 geochemical standards using the ChemCam testbed at Los Alamos National Laboratory [2]. In addition to these standards, the SO3 compositional range was recently extended with a series of doped samples containing various mixtures of Ca- and Mg-sulfate with basalt BHVO2. Spectra from these standards were processed per [4]. Calibration and Mars spectra were converted to peak-area-summed LIBS spectra that enables the SO3 calibration. These peak-area spectra were used to generate three overlapping partial least squares (PLS1) calibration sub-models as described by Anderson et al. [3, 5]. ChemCam analysis of Mavor involved a 3x3 raster in which locations 5 and 6 primarily probed Ca-sulfate material. The new ChemCam SO3 compositions for Mavor 5 and Mavor 6 are 48.6±1.2 and 50.3±1.2 wt% SO3, respectively. The LIBS spectra also recorded the presence of other elements that are likely responsible for the departure from pure Ca-sulfate chemistry. On the low-abundance side, the remaining 7 Mavor locations, Jake M., Cumberland, Windjana, and Wernecke all contain much lower SO3, between 1.4±0.5 wt% and 2.3±0.3 wt% SO3. [1] Nachon et

Optimal piston motion for maximum net output work of Daniel cam engines with low heat rejection

International Nuclear Information System (INIS)

Badescu, Viorel

2015-01-01

Highlights: • The piston motion of low heat rejection compression ignition engines is optimized. • A realistic model taking into account the cooling system is developed. • The optimized cam is smaller for cylinders without thermal insulation. • The optimized cam size depends on ignition moment and cooling process intensity. - Abstract: Compression ignition engines based on classical tapper-crank systems cannot provide optimal piston motion. Cam engines are more appropriate for this purpose. In this paper the piston motion of a Daniel cam engine is optimized. Piston acceleration is taken as a control. The objective is to maximize the net output work during the compression and power strokes. A major research effort has been allocated in the last two decades for the development of low heat rejection engines. A thermally insulated cylinder is considered and a realistic model taking into account the cooling system is developed. The sinusoidal approximation of piston motion in the classical tapper-crank system overestimates the engine efficiency. The exact description of the piston motion in tapper-crank system is used here as a reference. The radiation process has negligible effects during the optimization. The approach with no constraint on piston acceleration is a reasonable approximation. The net output work is much larger (by 12–13%) for the optimized system than for the classical tapper-crank system, for similar thickness of cylinder walls and thermal insulation. Low heat rejection measures are not of significant importance for optimized cam engines. The optimized cam is smaller for a cylinder without thermal insulation than for an insulated cylinder (by up to 8%, depending on the local polar radius). The auto-ignition moment is not a parameter of significant importance for optimized cam engines. However, for given cylinder wall and insulation materials there is an optimum auto-ignition moment which maximizes the net output work. The optimum auto

Post-cam mechanics and tibiofemoral kinematics: a dynamic in vitro analysis of eight posterior-stabilized total knee designs.

Science.gov (United States)

Arnout, N; Vanlommel, L; Vanlommel, J; Luyckx, J P; Labey, L; Innocenti, B; Victor, J; Bellemans, J

2015-11-01

Posterior cruciate ligament (PCL)-substituting total knee arthroplasty (TKA) designs were introduced to avoid paradoxical roll forward of the femur and to optimize knee kinematics. The aim of this in vitro study was to investigate post-cam function and contact mechanics and relate it to knee kinematics during squatting in eight contemporary posterior-stabilized TKA designs. All prostheses were fixed on custom-designed metal fixtures and mounted in a knee rig and five sequential-loaded squats were performed between 30° and 130° of flexion. Contact pressure and contact area were measured using pressure-sensitive Tekscan sensors on the posterior face of the post. Kinematics was recorded with reflective markers and infrared light-capturing cameras. The post-cam mechanisms analyzed in this study are very variable in terms of design features. This leads to large variations in terms of the flexion angle at which the post and cam engage maximal contact force, contact pressure and contact area. We found that more functional post-cam mechanisms, which engage at lower flexion angle and have a similar behavior as normal PCL function, generally show more normal rollback and tibial rotation at the expense of higher contact forces and pressures. All designs show high contact forces. A positive correlation was found between contact force and initial contact angle. Post-cam contact mechanics and kinematics were documented in a standardized setting. Post-cam contact mechanics are correlated with post-cam function. Outcomes of this study can help to develop more functional designs in future. Nevertheless, a compromise will always be made between functional requirements and risk of failure. We assume that more normal knee kinematics leads to more patient satisfaction because of better mobility. Understanding of the post-cam mechanism, and knowing how this system really works, is maybe the clue in further development of new total knee designs.

Advances in computer-aided engineering : CAD/CAM-research at Delft University of Technology. Report of the VF-project CAD/CAM 1989-1994

NARCIS (Netherlands)

Undetermined, U.

1994-01-01

This book contains a collection of articles describing on-going CAD/CAM-research at several engineering faculties at Delft University of Technology. Two main themes covered in this book are 'Conceptual design of complex products' and 'Product modelling and product data exchange'.

ChemCam activities and discoveries during the nominal mission of the Mars Science Laboratory in Gale crater, Mars

Science.gov (United States)

Maurice, Sylvestre; Clegg, Samuel M.; Wiens, Roger C.; Gasnault, O.; Rapin, W.; Forni, O.; Cousin, Agnes; Sautter, V.; Mangold, Nicolas; Le Deit, L.; Nachon, Marion; Anderson, Ryan; Lanza, Nina; Fabre, Cecile; Payre, Valerie; Lasue, Jeremie; Meslin, Pierre-Yves; LeVeille, Richard A.; Barraclough, Bruce; Beck, Pierre; Bender, Steven C.; Berger, Gilles; Bridges, John C.; Bridges, Nathan; Dromert, Gilles; Dyar, M. Darby; Francis, Raymond; Frydenvang, Jens; Gondet, B.; Ehlmann, Bethany L.; Herkenhoff, Kenneth E.; Johnson, Jeffrey R.; Langevin, Yves; Madsen Morten B.,; Melikechi, N.; Lacour, J.-L.; Le Mouelic, Stephane; Lewin, Eric; Newsom, Horton E.; Ollila, Ann M.; Pinet, Patrick; Schroder, S.; Sirven, Jean-Baptiste; Tokar, Robert L.; Toplis, M.J.; d'Uston, Claude; Vaniman, David; Vasavada, Ashwin R.

2016-01-01

At Gale crater, Mars, ChemCam acquired its first laser-induced breakdown spectroscopy (LIBS) target on Sol 13 of the landed portion of the mission (a Sol is a Mars day). Up to Sol 800, more than 188000 LIBS spectra were acquired on more than 5800 points distributed over about 650 individual targets. We present a comprehensive review of ChemCam scientific accomplishments during that period, together with a focus on the lessons learned from the first use of LIBS in space. For data processing, we describe new tools that had to be developed to account for the uniqueness of Mars data. With regard to chemistry, we present a summary of the composition range measured on Mars for major-element oxides (SiO2, TiO2, Al2O3, FeOT, MgO, CaO, Na2O, K2O) based on various multivariate models, with associated precisions. ChemCam also observed H, and the non-metallic elements C, O, P, and S, which are usually difficult to quantify with LIBS. F and Cl are observed through their molecular lines. We discuss the most relevant LIBS lines for detection of minor and trace elements (Li, Rb, Sr, Ba, Cr, Mn, Ni, and Zn). These results were obtained thanks to comprehensive ground reference datasets, which are set to mimic the expected mineralogy and chemistry on Mars. With regard to the first use of LIBS in space, we analyze and quantify, often for the first time, each of the advantages of using stand-off LIBS in space: no sample preparation, analysis within its petrological context, dust removal, sub-millimeter scale investigation, multi-point analysis, the ability to carry out statistical surveys and whole-rock analyses, and rapid data acquisition. We conclude with a discussion of ChemCam performance to survey the geochemistry of Mars, and its valuable support of decisions about selecting where and whether to make observations with more time and resource-intensive tools in the rover's instrument suite. In the end, we present a bird's-eye view of the many scientific results: discovery of felsic

Does physical exposure throughout working life influence chair-rise performance in midlife? A retrospective cohort study of associations between work and physical function in Denmark.

Science.gov (United States)

Møller, Anne; Reventlow, Susanne; Hansen, Åse Marie; Andersen, Lars L; Siersma, Volkert; Lund, Rikke; Avlund, Kirsten; Andersen, Johan Hviid; Mortensen, Ole Steen

2015-11-04

Our aim was to study associations between physical exposures throughout working life and physical function measured as chair-rise performance in midlife. The Copenhagen Aging and Midlife Biobank (CAMB) provided data about employment and measures of physical function. Individual job histories were assigned exposures from a job exposure matrix. Exposures were standardised to ton-years (lifting 1000 kg each day in 1 year), stand-years (standing/walking for 6 h each day in 1 year) and kneel-years (kneeling for 1 h each day in 1 year). The associations between exposure-years and chair-rise performance (number of chair-rises in 30 s) were analysed in multivariate linear and non-linear regression models adjusted for covariates. Mean age among the 5095 participants was 59 years in both genders, and, on average, men achieved 21.58 (SD=5.60) and women 20.38 (SD=5.33) chair-rises in 30 s. Physical exposures were associated with poorer chair-rise performance in both men and women, however, only associations between lifting and standing/walking and chair-rise remained statistically significant among men in the final model. Spline regression analyses showed non-linear associations and confirmed the findings. Higher physical exposure throughout working life is associated with slightly poorer chair-rise performance. The associations between exposure and outcome were non-linear. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Prevalence and Predictors of Complementary and Alternative Medicine (CAM) Use among Ivy League College Students: Implications for Student Health Services

Science.gov (United States)

Versnik Nowak, Amy L.; DeGise, Joe; Daugherty, Amanda; O'Keefe, Richard; Seward, Samuel, Jr.; Setty, Suma; Tang, Fanny

2015-01-01

Objective: Determine prevalence and types of complementary and alternative medicine (CAM) therapies used and test the significance of demographics and social cognitive constructs as predictors of CAM use in a college sample. Secondary purpose was to guide the integration of CAM therapies into college health services. Participants: Random,…

Demonstration of angle widening using EyeCam after laser peripheral iridotomy in eyes with angle closure.

Science.gov (United States)

Perera, Shamira A; Quek, Desmond T; Baskaran, Mani; Tun, Tin A; Kumar, Rajesh S; Friedman, David S; Aung, Tin

2010-06-01

To evaluate EyeCam in detecting changes in angle configuration after laser peripheral iridotomy (LPI) in comparison to gonioscopy, the reference standard. Prospective comparative study. Twenty-four subjects (24 eyes) with primary angle-closure glaucoma (PACG) were recruited. Gonioscopy and EyeCam (Clarity Medical Systems) imaging of all 4 angle quadrants were performed, before and 2 weeks after LPI. Images were graded according to angle structures visible by an observer masked to clinical data or the status of LPI, and were performed in a random order. Angle closure in a quadrant was defined as the inability to visualize the posterior trabecular meshwork. We determined the number of quadrants with closed angles and the mean number of clock hours of angle closure before and after LPI in comparison to gonioscopy. Using EyeCam, all 24 eyes showed at least 1 quadrant of angle widening after LPI. The mean number of clock hours of angle closure decreased significantly, from 8.15 +/- 3.47 clock hours before LPI to 1.75 +/- 2.27 clock hours after LPI (P gonioscopy showed 1.0 +/- 1.41 (95% CI, 0.43-1.57) quadrants opening from closed to open after LPI compared to 2.0 +/- 1.28 (95% CI, 1.49-2.51, P = .009) quadrants with EyeCam. Intra-observer reproducibility of grading the extent of angle closure in clock hours in EyeCam images was moderate to good (intraclass correlation coefficient 0.831). EyeCam may be used to document changes in angle configuration after LPI in eyes with PACG. Copyright 2010 Elsevier Inc. All rights reserved.

The Role of the Chair of the School Governing Body in England

Science.gov (United States)

James, Chris; Jones, Jeff; Connolly, Michael; Brammer, Steve; Fertig, Mike; James, Jane

2012-01-01

The research reported here analysed the role of the chair of the school governing body in England, drawing on a national survey of governors and the study of governing in 30 schools. The role encompassed: being a governor; appointing and working with the head teacher; acting as a change agent; active participation in the school; organising the…