WorldWideScience

Sample records for unextendible product base

  1. Low-rank extremal positive-partial-transpose states and unextendible product bases

    International Nuclear Information System (INIS)

    Leinaas, Jon Magne; Sollid, Per Oyvind; Myrheim, Jan

    2010-01-01

    It is known how to construct, in a bipartite quantum system, a unique low-rank entangled mixed state with positive partial transpose (a PPT state) from an unextendible product basis (UPB), defined as an unextendible set of orthogonal product vectors. We point out that a state constructed in this way belongs to a continuous family of entangled PPT states of the same rank, all related by nonsingular unitary or nonunitary product transformations. The characteristic property of a state ρ in such a family is that its kernel Ker ρ has a generalized UPB, a basis of product vectors, not necessarily orthogonal, with no product vector in Im ρ, the orthogonal complement of Ker ρ. The generalized UPB in Ker ρ has the special property that it can be transformed to orthogonal form by a product transformation. In the case of a system of dimension 3x3, we give a complete parametrization of orthogonal UPBs. This is then a parametrization of families of rank 4 entangled (and extremal) PPT states, and we present strong numerical evidence that it is a complete classification of such states. We speculate that the lowest rank entangled and extremal PPT states also in higher dimensions are related to generalized, nonorthogonal UPBs in similar ways.

  2. Unextendible Mutually Unbiased Bases (after Mandayam, Bandyopadhyay, Grassl and Wootters

    Directory of Open Access Journals (Sweden)

    Koen Thas

    2016-11-01

    Full Text Available We consider questions posed in a recent paper of Mandayam et al. (2014 on the nature of “unextendible mutually unbiased bases.” We describe a conceptual framework to study these questions, using a connection proved by the author in Thas (2009 between the set of nonidentity generalized Pauli operators on the Hilbert space of N d-level quantum systems, d a prime, and the geometry of non-degenerate alternating bilinear forms of rank N over finite fields F d . We then supply alternative and short proofs of results obtained in Mandayam et al. (2014, as well as new general bounds for the problems considered in loc. cit. In this setting, we also solve Conjecture 1 of Mandayam et al. (2014 and speculate on variations of this conjecture.

  3. Scenario based product design

    NARCIS (Netherlands)

    Tideman, M.

    2008-01-01

    Creating good products is not an easy thing to do. There are usually many different people who have an interest in the product. People such as the user, of course, but also marketing managers, production engineers, maintenance workers, recycling specialists, and government representatives, just to

  4. Information Based Productivity.

    Science.gov (United States)

    Bennett, Scott

    A digital project undertaken last year at Yale (Connecticut) offers an opportunity to explore productivity matters. The project aimed at improving the quality of library support and of student learning in one of the most heavily enrolled undergraduate courses at Yale, "Introduction to the History of Art, from Prehistory to the…

  5. Platform-based production development

    DEFF Research Database (Denmark)

    Bossen, Jacob; Brunoe, Thomas Ditlev; Nielsen, Kjeld

    2015-01-01

    Platforms as a means for applying modular thinking in product development is relatively well studied, but platforms in the production system has until now not been given much attention. With the emerging concept of platform-based co-development the importance of production platforms is though...

  6. Consumer-based product profiling

    DEFF Research Database (Denmark)

    Giacalone, Davide; Ribeiro, Leticia Machado; Frøst, Michael Bom

    2013-01-01

    Napping® is an inexpensive and rapid method for sensory characterization, suitable for both trained and untrained subjects. In the study presented, the method was applied on 9 specialty beers. Subjects were 17 consumers without any training as sensory panelists, of whom 8 were beer experts and 9 ...... for sensory characterization, with the advantage of providing a product characterization based on consumer descriptions, thus better reflecting consumers’ experience with the product....

  7. Solar based hydrogen production systems

    CERN Document Server

    Dincer, Ibrahim

    2013-01-01

    This book provides a comprehensive analysis of various solar based hydrogen production systems. The book covers first-law (energy based) and second-law (exergy based) efficiencies and provides a comprehensive understanding of their implications. It will help minimize the widespread misuse of efficiencies among students and researchers in energy field by using an intuitive and unified approach for defining efficiencies. The book gives a clear understanding of the sustainability and environmental impact analysis of the above systems. The book will be particularly useful for a clear understanding

  8. Dragee product based on sunflower

    Directory of Open Access Journals (Sweden)

    Pajin Biljana S.

    2003-01-01

    Full Text Available The sunflower kernel is rich in valuable nutritive compounds so it is suitable as a raw material for production of confectionery products. In this paper we evaluated the technological characteristics of the confectionery sunflower kernel with the aim of obtaining dragee products, and determining the final product quality and shelf life. The dragee product was obtained by panning sunflower kernel with savory powder mixture of spices in a dragee pan. The used sunflower seed has an even distribution of linear size and satisfactory dehulling characteristics. The savoury dragee product was in excellent category of sensory quality and showed stable colour and good shelf life in the period of three months.

  9. Market-based product development

    DEFF Research Database (Denmark)

    Bisp, Søren; Harmsen, Hanne

    1997-01-01

    A large body of research results on successful product development exists. The results are full of normative advice on how to conduct prod-uct development. At the same time studies have shown that product development practice has only to a very li extent been influenced by these research results...

  10. Consortia based production of biochemicals

    DEFF Research Database (Denmark)

    Ingemann Jensen, Sheila; Sukumara, Sumesh; Özdemir, Emre

    2016-01-01

    One of the great challenges facing society is how to sustainably produce food, chemicals and other commodities required to maintain and develop our current life style. To compete with and ultimately replace existing petrochemical-based manufacturing processes, the development of innovative...

  11. Developing product families based on architectures

    DEFF Research Database (Denmark)

    Harlou, Ulf

    2006-01-01

    family master plan (PFMP). The PFMP aims at modelling product families and especially variety of product families. The results of this thesis build on research literature and experiences from the industrial partners. Extensive verifications of the theory contributions, models and tools have been carried......The subject of this PhD thesis is development of product families based on architectures. Companies are introducing more and more product variants to fulfil the market demands. These new variants add complexity to many of the processes and systems in the companies. Reuse of standard designs (i.......e. design entities) and re-use of the way new products are developed can simplify the processes and systems. Case studies show that reuse can lead to reduction of cost and time-to-market of new products. One of the means for managing reuse of standard designs within product families are architectures...

  12. New Product Development Based on Demand

    OpenAIRE

    Davis-Krook, Shelby

    2015-01-01

    The purpose of this thesis was to determine how to develop a new product based on demand within a target market for an international company. Specifically looking at developing a new product line in an already developed brand, Alpha Performance. The research I have conducted in the following topics may help Alpha Performance if they choose to use my findings to create a one of a kind woman’s clothing line based on the demands of the Finnish market: target market research, product demand rese...

  13. NDSI products system based on Hadoop platform

    Science.gov (United States)

    Zhou, Yan; Jiang, He; Yang, Xiaoxia; Geng, Erhui

    2015-12-01

    Snow is solid state of water resources on earth, and plays an important role in human life. Satellite remote sensing is significant in snow extraction with the advantages of cyclical, macro, comprehensiveness, objectivity, timeliness. With the continuous development of remote sensing technology, remote sensing data access to the trend of multiple platforms, multiple sensors and multiple perspectives. At the same time, in view of the remote sensing data of compute-intensive applications demand increase gradually. However, current the producing system of remote sensing products is in a serial mode, and this kind of production system is used for professional remote sensing researchers mostly, and production systems achieving automatic or semi-automatic production are relatively less. Facing massive remote sensing data, the traditional serial mode producing system with its low efficiency has been difficult to meet the requirements of mass data timely and efficient processing. In order to effectively improve the production efficiency of NDSI products, meet the demand of large-scale remote sensing data processed timely and efficiently, this paper build NDSI products production system based on Hadoop platform, and the system mainly includes the remote sensing image management module, NDSI production module, and system service module. Main research contents and results including: (1)The remote sensing image management module: includes image import and image metadata management two parts. Import mass basis IRS images and NDSI product images (the system performing the production task output) into HDFS file system; At the same time, read the corresponding orbit ranks number, maximum/minimum longitude and latitude, product date, HDFS storage path, Hadoop task ID (NDSI products), and other metadata information, and then create thumbnails, and unique ID number for each record distribution, import it into base/product image metadata database. (2)NDSI production module: includes

  14. Geriatric dietary meat-based products

    OpenAIRE

    Kuzelov, Aco; Agunova, Larisa

    2016-01-01

    The contemporary nutrition pattern referring to different age groups of the population does not meet quantitative and qualitative requirements. In Ukraine the manufacture of geriatric meat-based dietary products is underdeveloped. Therefore, the development of healthy and functional foods is the priority objective for the food industry. The research is devoted to considering the possibility of using quail meat, wheat germ flakes and walnut oil in the production process of the sausages for ...

  15. Network-based production quality control

    Science.gov (United States)

    Kwon, Yongjin; Tseng, Bill; Chiou, Richard

    2007-09-01

    This study investigates the feasibility of remote quality control using a host of advanced automation equipment with Internet accessibility. Recent emphasis on product quality and reduction of waste stems from the dynamic, globalized and customer-driven market, which brings opportunities and threats to companies, depending on the response speed and production strategies. The current trends in industry also include a wide spread of distributed manufacturing systems, where design, production, and management facilities are geographically dispersed. This situation mandates not only the accessibility to remotely located production equipment for monitoring and control, but efficient means of responding to changing environment to counter process variations and diverse customer demands. To compete under such an environment, companies are striving to achieve 100%, sensor-based, automated inspection for zero-defect manufacturing. In this study, the Internet-based quality control scheme is referred to as "E-Quality for Manufacturing" or "EQM" for short. By its definition, EQM refers to a holistic approach to design and to embed efficient quality control functions in the context of network integrated manufacturing systems. Such system let designers located far away from the production facility to monitor, control and adjust the quality inspection processes as production design evolves.

  16. Network Based High Speed Product Innovation

    DEFF Research Database (Denmark)

    Lindgren, Peter

    In the first decade of the 21st century, New Product Development has undergone major changes in the way NPD is managed and organised. This is due to changes in technology, market demands, and in the competencies of companies. As a result NPD organised in different forms of networks is predicted...... to be of ever-increasing importance to many different kinds of companies. This happens at the same times as the share of new products of total turnover and earnings is increasing at unprecedented speed in many firms and industries. The latter results in the need for very fast innovation and product development...... - a need that can almost only be resolved by organising NPD in some form of network configuration. The work of Peter Lindgren is on several aspects of network based high speed product innovation and contributes to a descriptive understanding of this phenomenon as well as with normative theory on how NPD...

  17. Modeling oil production based on symbolic regression

    International Nuclear Information System (INIS)

    Yang, Guangfei; Li, Xianneng; Wang, Jianliang; Lian, Lian; Ma, Tieju

    2015-01-01

    Numerous models have been proposed to forecast the future trends of oil production and almost all of them are based on some predefined assumptions with various uncertainties. In this study, we propose a novel data-driven approach that uses symbolic regression to model oil production. We validate our approach on both synthetic and real data, and the results prove that symbolic regression could effectively identify the true models beneath the oil production data and also make reliable predictions. Symbolic regression indicates that world oil production will peak in 2021, which broadly agrees with other techniques used by researchers. Our results also show that the rate of decline after the peak is almost half the rate of increase before the peak, and it takes nearly 12 years to drop 4% from the peak. These predictions are more optimistic than those in several other reports, and the smoother decline will provide the world, especially the developing countries, with more time to orchestrate mitigation plans. -- Highlights: •A data-driven approach has been shown to be effective at modeling the oil production. •The Hubbert model could be discovered automatically from data. •The peak of world oil production is predicted to appear in 2021. •The decline rate after peak is half of the increase rate before peak. •Oil production projected to decline 4% post-peak

  18. Replacing fossil based plastic performance products by bio-based plastic products-Technical feasibility

    NARCIS (Netherlands)

    Oever, van den Martien; Molenveld, Karin

    2017-01-01

    Larger scale market introduction of new bio-based products requires a clear advantage regarding sustainability, as well as an adequate techno-economic positioning relative to fossil based products. In a previous paper [Broeren et al., 2016], LCA results per kg and per functionality equivalent of

  19. Environmental interactions of cement-based products

    NARCIS (Netherlands)

    Florea, M.V.A.; Schmidt, W.; Msinjili, N.S.

    2016-01-01

    The environmental interactions of concrete and other cement-based products encompasses both the influence of such materials on their environment, as well as the effects of the environment on the materials in time. There are a number of ways in which the environmental impact of concrete can be

  20. DEVELOPMENT OF WOOD-BASED PRODUCTS WORLDWIDE

    Directory of Open Access Journals (Sweden)

    Marius C. BARBU

    2015-12-01

    Full Text Available The tendency in recent decades for manufacturing plants of semi-finished products such as composite panels, has been to invest in order to achieve high production capacities (>2,000 m³/day for panels and >3,000 t/day for paper with one line. The trend of concentrating the primary processing capacities and manufacturing wood-based panels will continue for the next few years not only in Europe but in North and South America as well. The ten largest panel manufacturers had a combined manufacturing capacity that exceeded a third of the worldwide production capacity. The financial crisis that started in 2008 has caused the closure of a large number of factories especially in North America and Central Europe. Small- and medium-sized producers will only survive if they will continue to specialize in the manufacture of panel types and sizes (niche products that are “unprofitable” for mega-groups. The installed production capacity worldwide of all wood-based composite panels combined (includes PY, PB, MDF, OSB rose by more than 2.5 times between 1980 and 2005 (225 mil.m³, and continues to increase despite the crises reaching approx. 300 mil.m³ in 2013. The forecast for the coming years varies greatly from continent to continent. In North America and Central Europe, both a consolidation of the available production capacities and the closure of less efficient older lines are expected. The lowest point of the effect of the financial crisis on the building industry seems to have been overcome. The furniture production companies will continue to move from one continent and region to another.

  1. Image based SAR product simulation for analysis

    Science.gov (United States)

    Domik, G.; Leberl, F.

    1987-01-01

    SAR product simulation serves to predict SAR image gray values for various flight paths. Input typically consists of a digital elevation model and backscatter curves. A new method is described of product simulation that employs also a real SAR input image for image simulation. This can be denoted as 'image-based simulation'. Different methods to perform this SAR prediction are presented and advantages and disadvantages discussed. Ascending and descending orbit images from NASA's SIR-B experiment were used for verification of the concept: input images from ascending orbits were converted into images from a descending orbit; the results are compared to the available real imagery to verify that the prediction technique produces meaningful image data.

  2. Flour production from shrimp by-products and sensory evaluation of flour-based products

    Directory of Open Access Journals (Sweden)

    Thiago Mendes Fernandes

    2013-08-01

    Full Text Available The objective of this work was to evaluate the production of flour using by-products (cephalothorax obtained from the shrimp (Litopenaeus vannamei industry, and to perform a sensory analysis of shrimp flour-based products. Physicochemical and microbiological analyses on fresh cephalothorax and on manufactured flour were performed, as well as the determination of cholesterol content of this flour, and the sensorial evaluation of soup and pastry made with this flour. By the microbiological analyses, no pathogenic microorganism was detected in the samples. Physicochemical analyses of flour showed high levels of protein (50.05% and minerals (20.97%. Shrimp cephalothorax flour showed high levels of cholesterol. The sensory evaluation indicated a good acceptance of the products, with satisfactory acceptability index (81% for soup, and 83% for pastry, which indicates that shrimp cephalothorax in the form of flour has a potential for developing new products.

  3. National contingency plan product schedule data base

    International Nuclear Information System (INIS)

    Putukian, J.; Hiltabrand, R.R.

    1993-01-01

    During oil spills there are always proposals by the technical community and industry to use chemical agents to help in oil spill cleanups. Federal Clean Water Act regulations require that any chemical agents that the federal on-scene coordinator (FOSC) wants to use for oil cleanup be listed on the US Environmental Protection Agency (EPA) National Contingency Plan (NCP) Product Schedule. Chemical countermeasures are among the most controversial, complex, and time-critical issues facing decision-making officials choosing response methods to use on coastal oil spills. There are situations in which dispersants are likely to be one of the most appropriate counter-measure strategies. Dispersants are most effective when applied to fresh oil, and their effectiveness dramatically decreases as the oil weathers, which can begin in as little as 24 hours. To logistically implement dispersant use, a decision would need to be made within roughly the first 4 hours after the release. Most of the information that the FOSC needs to make the determination to use a specific chemical agent exists in manuals, EPA bulletins, and the published literature. This information is not in an easy-to-use format under field emergency conditions. Hence the need to collect and disseminate the information in an automated data base. The sources for the information in this data base are the following. Published results of tests performed by Environment Canada; EPA bulletins associated with the NCP Product Schedule; Published results of tests by the chemical industry. The data base resides on a Macintosh computer and contains information about 70 NCP products, including dispersants, surface collecting agents, and biological additives. It contains information on physical properties, toxicity, heavy metal content, safety precautions, use conditions, etc

  4. Undulator-Based Production of Polarized Photons

    International Nuclear Information System (INIS)

    McDonald, Kirk

    2008-01-01

    'Project Title: Undulator-Based Production of Polarized Photons' DOE Contract Number: FG02-04ER41355 Principal Investigator: Prof. Kirk McDonald Period of Performance: 09/10/2004 thru 08/31/2006 This award was to fund Princeton's activity on SLAC experiment E166, 'Undulator-Based Production of Polarized Positrons' which was performed at SLAC during June and September 2005. Princeton U. fabricated a magnetic spectrometer for this experiment, and participated in the commissioning, operation, and analysis of the experiment, for which Prof. McDonald was a co-spokesperson. The experiment demonstrated that an intense positron beam with 80% longitudinal polarization could be generated by conversion of MeVenergy circularly polarized photons in a thin target, which photons were generated by passage of high-energy electrons through a helical undulator. This technique has since been adopted as the baseline for the polarized positron source of the proposed International Linear Collider. Results of the experiment have been published in Physical Review Letters, vol 100, p 210801 (2008) (see attached .pdf file), and a longer paper is in preparation.

  5. Commercial production of metal hafnium and hafnium-based products

    International Nuclear Information System (INIS)

    Negodin, D.A.; Shtutsa, M.G.; Akhtonov, S.G.; Il'enko, E.V.; Kobyzev, A.M.

    2012-01-01

    Hafnium possesses a unique complex of physical and chemical properties which allow the application of products on its basis in various industries. Joint Stock Company 'Chepetsky Mechanical Plant' is the single enterprise which produces hafnium on the territory of Russia. The manufacture of metal hafnium with the total content of zirconium and hafnium, at least, 99,8 % of weights is developed at the present time at Joint Stock Company CHMZ. The weight of melted hafnium ingots is up to 1 ton. Manufacture of wide range of products from hafnium is implemented. The plates from a hafnium with thickness of 0.60 mm which are used for emergency control cartridges of VVER-440 reactors are the most critical product. It is shown that ingots and products obtained from metal hafnium correspond to the Russian and international standards for reactor materials in chemical composition, mechanical and corrosion properties.

  6. Thermochemical hydrogen production based on magnetic fusion

    International Nuclear Information System (INIS)

    Krikorian, O.H.; Brown, L.C.

    1982-01-01

    Conceptual design studies have been carried out on an integrated fusion/chemical plant system using a Tandem Mirror Reactor fusion energy source to drive the General Atomic Sulfur-Iodine Water-Splitting Cycle and produce hydrogen as a future feedstock for synthetic fuels. Blanket design studies for the Tandem Mirror Reactor show that several design alternatives are available for providing heat at sufficiently high temperatures to drive the General Atomic Cycle. The concept of a Joule-boosted decomposer is introduced in one of the systems investigated to provide heat electrically for the highest temperature step in the cycle (the SO 3 decomposition step), and thus lower blanket design requirements and costs. Flowsheeting and conceptual process designs have been developed for a complete fusion-driven hydrogen plant, and the information has been used to develop a plot plan for the plant and to estimate hydrogen production costs. Both public and private utility financing approaches have been used to obtain hydrogen production costs of $12-14/GJ based on July 1980 dollars

  7. Replacing fossil based plastic performance products by bio-based plastic products-Technical feasibility.

    Science.gov (United States)

    van den Oever, Martien; Molenveld, Karin

    2017-07-25

    Larger scale market introduction of new bio-based products requires a clear advantage regarding sustainability, as well as an adequate techno-economic positioning relative to fossil based products. In a previous paper [Broeren et al., 2016], LCA results per kg and per functionality equivalent of bio-based plastics were presented, together with economic considerations. The present paper discusses the mechanical and thermal properties of a range of commercially available bio-based plastics based on polylactic acid (PLA), cellulose esters, starch and polyamides, and the feasibility of replacing fossil-based counterparts based on performance. The evaluation is approached from an end user perspective. First, potentially suitable bio-based plastics are selected based on manufacturers' specifications in technical data sheets, then a first experimental evaluation is performed on injection moulded ISO specimens, and finally a further selection of plastics is tested on large 50×70cm panels. This technical feasibility study indicates that so far bio-based plastics do not completely match the properties of high performance materials like flame retardant V-0 PC/ABS blends used in electronic devices. The performance gap is being decreased by the development of stereocomplex PLA and hybrid PLA blends with polycarbonate, which offer clearly improved properties with respect to maximum usage temperature and toughness. In addition, several materials meet the V-0 flammability requirements needed in specific durable applications. On the other hand, improving these properties so far has negative consequences for the bio-based content. This study also shows that replacement of bulk polymers like PS is feasible using PLA compounds with a bio-based content as high as 85%. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Challenges for bio-based products in sustainable value chains

    NARCIS (Netherlands)

    Cardon, L.; Lin, J.W.; De Groote, M.; Ragaert, K.; Kopecka, J.A.; Koster, R.P.

    2011-01-01

    This work concerns studies related to strategic development of products in which bio-based plastics are or will be applied, referred to as bio-based products. The studies cover (1) current and potential benefits of bio-based products in extended value chains including activities after end-of-life of

  9. Grassland-based products: quality and authentication

    NARCIS (Netherlands)

    Coppa, M.; Cabiddu, A.; Elsässer, M.; Hulin, S.; Lind, V.; Martin, B.; Mosquera-Losada, M.R.; Peeters, A.; Prache, S.; Pol, van den A.; Peratoner, G.

    2017-01-01

    There is increased consumer demand for food products with a perceived positive image. Product quality can be assessed in terms of food safety, nutritional composition, technological and sensory characteristics and ethics. In order to summarise the current knowledge linking quality traits and

  10. A product feature-based user-centric product search model

    OpenAIRE

    Ben Jabeur, Lamjed; Soulier, Laure; Tamine, Lynda; Mousset, Paul

    2016-01-01

    During the online shopping process, users would search for interesting products and quickly access those that fit with their needs among a long tail of similar or closely related products. Our contribution addresses head queries that are frequently submitted on e-commerce Web sites. Head queries usually target featured products with several variations, accessories, and complementary products. We present in this paper a product feature-based user-centric model for product search involving in a...

  11. Product portfolio optimization based on substitution

    DEFF Research Database (Denmark)

    Myrodia, Anna; Moseley, A.; Hvam, Lars

    2017-01-01

    The development of production capabilities has led to proliferation of the product variety offered to the customer. Yet this fact does not directly imply increase of manufacturers' profitability, nor customers' satisfaction. Consequently, recent research focuses on portfolio optimization through...... substitution and standardization techniques. However when re-defining the strategic market decisions are characterized by uncertainty due to several parameters. In this study, by using a GAMS optimization model we present a method for supporting strategic decisions on substitution, by quantifying the impact...

  12. Automatic support for product based workflow design : generation of process models from a product data model

    NARCIS (Netherlands)

    Vanderfeesten, I.T.P.; Reijers, H.A.; Aalst, van der W.M.P.; Vogelaar, J.J.C.L.; Meersman, R.; Dillon, T.; Herrero, P.

    2010-01-01

    Product Based Workflow Design (PBWD) is one of the few scientific methodologies for the (re)design of workflow processes. It is based on an analysis of the product that is produced in the workflow process and derives a process model from the product structure. Until now this derivation has been a

  13. Novel Cyclotron-Based Radiometal Production

    International Nuclear Information System (INIS)

    DeGrado, Timothy R.

    2013-01-01

    Accomplishments: (1) Construction of prototype solution target for radiometal production; (2) Testing of prototype target for production of following isotopes: a. Zr-89. Investigation of Zr-89 production from Y-89 nitrate solution. i. Defined problems of gas evolution and salt precipitation. ii. Solved problem of precipitation by addition of nitric acid. iii. Solved gas evolution problem with addition of backpressure regulator and constant degassing of target during irradiations. iv. Investigated effects of Y-89 nitrate concentration and beam current. v. Published abstracts at SNM and ISRS meetings; (3) Design of 2nd generation radiometal solution target. a. Included reflux chamber and smaller target volume to conserve precious target materials. b. Included aluminum for prototype and tantalum for working model. c. Included greater varicosities for improved heat transfer; and, (4) Construction of 2nd generation radiometal solution target started

  14. Beyond products: services-based strategy.

    Science.gov (United States)

    Quinn, J B; Doorley, T L; Paquette, P C

    1990-01-01

    Services technologies are changing the way companies in every industry--manufacturers and service providers alike--compete. Vertical integration, physical facilities, even a seemingly superior product can no longer assure a competitive edge. Instead, sustainable advantage is more and more likely to come from developing superior capabilities in a few core service skills--and out-sourcing as much of the rest as possible. Within companies, technology is increasing the leverage of service activities: today, more value added comes from design innovations, product image, or other attributes that services create than from the production process. New technologies also let independent enterprises provide world-class services at lower costs than customers could achieve if they performed the activities themselves. These changes have far-reaching implications for how managers structure their organizations and define strategic focus. Companies like Apple, Honda, and Merck show that a less integrated but more focused organization is key to competitive success. They build their strategies around a few highly developed capabilities. And they outsource as many of the other activities in their value chain as possible. To help managers develop an activity-focused strategy, the authors offer a new way to approach competitive analyses, guidelines for determining which activities to outsource and which to retain, and an overview of the risks and rewards of strategic outsourcing. Throughout, they draw on the findings of their three-year study of the major impacts technology has had in the service sector.

  15. Projecting LED product life based on application

    Science.gov (United States)

    Narendran, Nadarajah; Liu, Yi-wei; Mou, Xi; Thotagamuwa, Dinusha R.; Eshwarage, Oshadhi V. Madihe

    2016-09-01

    LED products have started to displace traditional light sources in many lighting applications. One of the commonly claimed benefits for LED lighting products is their long useful lifetime in applications. Today there are many replacement lamp products using LEDs in the marketplace. Typically, lifetime claims of these replacement lamps are in the 25,000-hour range. According to current industry practice, the time for the LED light output to reach the 70% value is estimated according to IESNA LM-80 and TM-21 procedures and the resulting value is reported as the whole system life. LED products generally experience different thermal environments and switching (on-off cycling) patterns when used in applications. Current industry test methods often do not produce accurate lifetime estimates for LED systems because only one component of the system, namely the LED, is tested under a continuous-on burning condition without switching on and off, and because they estimate for only one failure type, lumen depreciation. The objective of the study presented in this manuscript was to develop a test method that could help predict LED system life in any application by testing the whole LED system, including on-off power cycling with sufficient dwell time, and considering both failure types, catastrophic and parametric. The study results showed for the LED A-lamps tested in this study, both failure types, catastrophic and parametric, exist. The on-off cycling encourages catastrophic failure, and maximum operating temperature influences the lumen depreciation rate and parametric failure time. It was also clear that LED system life is negatively affected by on-off switching, contrary to commonly held belief. In addition, the study results showed that most of the LED systems failed catastrophically much ahead of the LED light output reaching the 70% value. This emphasizes the fact that life testing of LED systems must consider catastrophic failure in addition to lumen depreciation, and

  16. Simulation Based Optimization for World Line Card Production System

    Directory of Open Access Journals (Sweden)

    Sinan APAK

    2012-07-01

    Full Text Available Simulation based decision support system is one of the commonly used tool to examine complex production systems. The simulation approach provides process modules which can be adjusted with certain parameters by using data relatively easily obtainable in production process. World Line Card production system simulation is developed to evaluate the optimality of existing production line via using discrete event simulation model with variaty of alternative proposals. The current production system is analysed by a simulation model emphasizing the bottlenecks and the poorly utilized production line. Our analysis identified some improvements and efficient solutions for the existing system.

  17. Product design pattern based on big data-driven scenario

    OpenAIRE

    Conggang Yu; Lusha Zhu

    2016-01-01

    This article discusses about new product design patterns in the big data era, gives designer a new rational thinking way, and is a new way to understand the design of the product. Based on the key criteria of the product design process, category, element, and product are used to input the data, which comprises concrete data and abstract data as an enlargement of the criteria of product design process for the establishment of a big data-driven product design pattern’s model. Moreover, an exper...

  18. The potential of fish production based on periphyton

    NARCIS (Netherlands)

    Dam, van A.A.; Beveridge, M.C.M.; Azim, M.E.; Verdegem, M.C.J.

    2002-01-01

    Periphyton is composed of attached plant and animal organisms embedded in a mucopolysaccharide matrix. This review summarizes research on periphyton-based fish production and on periphyton productivity and ingestion by fish, and explores the potential of developing periphyton-based aquaculture.

  19. Product design pattern based on big data-driven scenario

    Directory of Open Access Journals (Sweden)

    Conggang Yu

    2016-07-01

    Full Text Available This article discusses about new product design patterns in the big data era, gives designer a new rational thinking way, and is a new way to understand the design of the product. Based on the key criteria of the product design process, category, element, and product are used to input the data, which comprises concrete data and abstract data as an enlargement of the criteria of product design process for the establishment of a big data-driven product design pattern’s model. Moreover, an experiment and a product design case are conducted to verify the feasibility of the new pattern. Ultimately, we will conclude that the data-driven product design has two patterns: one is the concrete data supporting the product design, namely “product–data–product” pattern, and the second is based on the value of the abstract data for product design, namely “data–product–data” pattern. Through the data, users are involving themselves in the design development process. Data and product form a huge network, and data plays a role of connection or node. So the essence of the design is to find a new connection based on element, and to find a new node based on category.

  20. Recirculation: A New Concept to Drive Innovation in Sustainable Product Design for Bio-Based Products.

    Science.gov (United States)

    Sherwood, James; Clark, James H; Farmer, Thomas J; Herrero-Davila, Lorenzo; Moity, Laurianne

    2016-12-29

    Bio-based products are made from renewable materials, offering a promising basis for the production of sustainable chemicals, materials, and more complex articles. However, biomass is not a limitless resource or one without environmental and social impacts. Therefore, while it is important to use biomass and grow a bio-based economy, displacing the unsustainable petroleum basis of energy and chemical production, any resource must be used effectively to reduce waste. Standards have been developed to support the bio-based product market in order to achieve this aim. However, the design of bio-based products has not received the same level of attention. Reported here are the first steps towards the development of a framework of understanding which connects product design to resource efficiency. Research and development scientists and engineers are encouraged to think beyond simple functionality and associate value to the potential of materials in their primary use and beyond.

  1. An Intelligent Method of Product Scheme Design Based on Product Gene

    Directory of Open Access Journals (Sweden)

    Qing Song Ai

    2013-01-01

    Full Text Available Nowadays, in order to have some featured products, many customers tend to buy customized products instead of buying common ones in supermarket. The manufacturing enterprises, with the purpose of improving their competitiveness, are focusing on providing customized products with high quality and low cost as well. At present, how to produce customized products rapidly and cheaply has been the key challenge to manufacturing enterprises. In this paper, an intelligent modeling approach applied to supporting the modeling of customized products is proposed, which may improve the efficiency during the product design process. Specifically, the product gene (PG method, which is an analogy of biological evolution in engineering area, is employed to model products in a new way. Based on product gene, we focus on the intelligent modeling method to generate product schemes rapidly and automatically. The process of our research includes three steps: (1 develop a product gene model for customized products; (2 find the obtainment and storage method for product gene; and (3 propose a specific genetic algorithm used for calculating the solution of customized product and generating new product schemes. Finally, a case study is applied to test the usefulness of our study.

  2. Consumer’s market analysis of products based on cassava

    Science.gov (United States)

    Unteawati, Bina; Fitriani; Fatih, Cholid

    2018-03-01

    Cassava product has the important role for enhancing household's income in rural. Cassava as raw material food is plentiful as local food in Lampung. Cassava product is one of strategic value addition activities. Value additional activities are a key to create income source enrichment in rural. The household was product cassava as a snack or additional food. Their product cassava was operated in small-scale, traditional, and discontinuous production. They have been lacked in technology, capital, and market access. Measurement the sustainability of their business is important. The market has driven the business globally. This research aims to (1) describe the cassava demand to locally product cassava in rural and (2) analysis the consumer's perception of cassava product. Research take placed in Lampung Province, involved Bandar Lampung and Metro City, Pringsewu, Pesawaran, Central Lampung, and East Lampung district. It is held in February until April 2017. Data were analyzed by descriptive statistic and multidimensional scaling. Based on the analysis conclude that (1) the demand of product cassava from rural was massive in volume and regularity with the enormous transaction. This fact is very important to role business cycles. Consumers demand continuously will lead the production of cassava product sustain. Producers of product cassava will consume fresh cassava for the farmer. Consumption of fresh cassava for home industry regularly in rural will develop balancing in fresh cassava price in the farming gate (2) The consumer's perception on cassava product in the different market showed that they prefer much to consume cassava chips as cassava product products than other. Next are crackers, opak, and tiwul rice. Urban consumers prefer product products as snacks (chips, crumbs, and opak), with consumption frequency of 2-5 times per week and volume of 1-3 kg purchases. Consumers in rural were more frequent with daily consumption frequency. Multidimensional scaling

  3. Understanding Project Based Production through Socio-technical Modularity

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff

    This paper develops an approach for understanding Project Based Production. This form of production is characterized by unique deliverables, high complexity, high value, high risk, profound uncertainty and many stakeholders and is increasingly important the postmodern society. Common to the pract......This paper develops an approach for understanding Project Based Production. This form of production is characterized by unique deliverables, high complexity, high value, high risk, profound uncertainty and many stakeholders and is increasingly important the postmodern society. Common...... to the practices of PBP and other production practices is the goal of balancing the dilemma between creativity and productivity. In response to industrialized production, the concept of modularity gained popularity for addressing this dilemma by exploring product, process and organization structures. However...... with the starting point in system theory and a strong bias towards industrial production, the predominant understanding of modularity faces difficulty in explaining practices of Project Based Production in both social – technical and dynamic – stable aspects. Illustrated by a case the paper addresses this gap...

  4. Computerized integrated data base production system (COMPINDAS)

    Energy Technology Data Exchange (ETDEWEB)

    Marek, D; Buerk, K [Fachinformationszentrum Karlsruhe, Gesellschaft fuer Wissenschaftlich-Technische Information mbH, Eggenstein-Leopoldshafen (Germany)

    1990-05-01

    Based on many years of experience, and with the main objective in mind to guarantee long-term database quality and efficiency of input processes, Fachinformationszentrum Karlsruhe is developing an integrated interactive data management systems for bibliographic and factual databases. Its concept includes the following range of applications: Subject analysis with computer-assisted classification, indexing and translation; technical procedures with online acquisition and management of literature and factual data, recording by means of optical scanning, computer-assisted bibliographic description, control and update procedures; support of the whole process by continuous surveillance of document flow. All these procedures will be performed in an integrated manner. They system is to meet high standards for flexibility, data integrity and effectiveness of system functions. Independent of the type of data, the appropriate database or the subject field to be handled, all data will be stored in one large pool. One main goal is to avoid duplication of work and redundancy of data storage. The system will work online, interactive and conversational. COMPINDAS is being established on the basis of the ADABAS as database management system for storage and retrieval. The applications are being generated by means of aDis of ASTEC in Munich. aDis is used for the definition of the data structures, checking routines, coupling processes, and the design of dialogue and batch routines including masks. (author). 7 figs.

  5. Computerized integrated data base production system (COMPINDAS)

    International Nuclear Information System (INIS)

    Marek, D.; Buerk, K.

    1990-05-01

    Based on many years of experience, and with the main objective in mind to guarantee long-term database quality and efficiency of input processes, Fachinformationszentrum Karlsruhe is developing an integrated interactive data management systems for bibliographic and factual databases. Its concept includes the following range of applications: Subject analysis with computer-assisted classification, indexing and translation; technical procedures with online acquisition and management of literature and factual data, recording by means of optical scanning, computer-assisted bibliographic description, control and update procedures; support of the whole process by continuous surveillance of document flow. All these procedures will be performed in an integrated manner. They system is to meet high standards for flexibility, data integrity and effectiveness of system functions. Independent of the type of data, the appropriate database or the subject field to be handled, all data will be stored in one large pool. One main goal is to avoid duplication of work and redundancy of data storage. The system will work online, interactive and conversational. COMPINDAS is being established on the basis of the ADABAS as database management system for storage and retrieval. The applications are being generated by means of aDis of ASTEC in Munich. aDis is used for the definition of the data structures, checking routines, coupling processes, and the design of dialogue and batch routines including masks. (author). 7 figs

  6. Bio-based products from solar energy and carbon dioxide.

    Science.gov (United States)

    Yu, Jian

    2014-01-01

    Producing bio-based products directly from CO₂ and solar energy is a desirable alternative to the conventional biorefining that relies on biomass feedstocks. The production paradigm is based on an artificial photosynthetic system that converts sunlight to electricity and H₂ via water electrolysis. An autotrophic H₂-oxidizing bacterium fixes CO₂ in dark conditions. The assimilated CO₂ is stored in bacterial cells as polyhydroxybutyrate (PHB), from which a range of products can be derived. Compared with natural photosynthesis of a fast-growing cyanobacterium, the artificial photosynthetic system has much higher energy efficiency and productivity of bio-based products. The new technology looks promising because of possible cost reduction in feedstock, equipment, and operation. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. "Legal highs" on the net-Evaluation of UK-based Websites, products and product information.

    Science.gov (United States)

    Schmidt, Martin M; Sharma, Akhilesh; Schifano, Fabrizio; Feinmann, Charlotte

    2011-03-20

    A vast array of substances are marketed as "legal highs" in the UK. These products are mainly marketed online and are packaged and produced to mimic illicit drugs. Little is known about the full range of products available at present and no studies have evaluated the product information provided to consumers. AIMS & HYPOTHESIS: To describe the available legal high products marketed by UK-based Internet retailers and evaluate the product information provided to consumers. Websites were identified using the terms "buy legal highs+UK" and two search engines. The first 100 hits and a random sample of 5% of the remaining results were screened. Websites based in the UK were included and all products were entered on a database. Information on product name, list price, claimed effects, side effects, contraindications and interactions was extracted. A descriptive analysis was conducted using SPSS v14. 115 Websites met the inclusion criteria but due to duplicate listings this was reduced to 39 unique Websites. 1308 products were found and evaluated. The average product price was 9.69 British pounds. Products took the form of pills (46.6%), smoking material (29.7%) and single plant material/extract (18.1%). Most products claimed to be stimulants (41.7%), sedatives (32.3%), or hallucinogens (12.9%). 40.1% of products failed to list ingredients, 91.9% failed to list side effects, 81.9% failed to list contraindications and 86.3% failed to list drug interactions. Top 5 products (with active ingredients in brackets) by frequency were Salvia divinorum (Salivinorin A), Kratom (Mitragynine), Hawaiian Baby Woodrose Seeds (Lysergic Acid Amide), Fly Agaric (Ibotenic Acid, Muscimol) and Genie (JWH018, CP47497). Products marketed as "legal highs" are easily available from UK-based Internet retailers and are reasonably affordable. Safety information provided to consumers is poor. Uninformed users risk serious adverse effects. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  8. Farmers' Perception towards Organic-based Vegetable Produc-tion ...

    African Journals Online (AJOL)

    It is well established that organic farming is a production system that sustain the health of the soils, ecosystems and people. This study assessed the small-scale farmers' perception towards organic based vegetable production in Ilaro agricultural zone of Ogun state, Nigeria. A multi-stage sampling procedure was used in the ...

  9. Product Liability: A Neo-Austrian Based Perspective

    NARCIS (Netherlands)

    Folmer, H.; Heijman, W.J.M.; Leen, A.R.

    2002-01-01

    The paper is an exercise in a neo-Austrian based economic analysis of product liability. After a short historical introduction, we take two of the basic premises of Austrian economic thought and see which system of product liability results. If costs are subjective and entrepreneurship is the

  10. Structure and manual of radioisotope-production data base, ISOP

    International Nuclear Information System (INIS)

    Hata, Kentaro; Terunuma, Kusuo

    1994-02-01

    We planned on collecting the information of radioisotope production which was obtained from research works and tasks at the Department of Radioisotopes in JAERI, and constructed a proto-type data base ISOP after discussion of the kinds and properties of the information available for radioisotope production. In this report the structure and the manual of ISOP are described. (author)

  11. a cost-benefit analysis of farmer based seed production

    African Journals Online (AJOL)

    Prof. Adipala Ekwamu

    of farmer based common bean seed production in Kenya. The study used .... this limited our ability to assess the impact of management and other ... traditional method of broad casting seed rather than following the .... Handbook 1. Network on ...

  12. Model based process-product design and analysis

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    This paper gives a perspective on modelling and the important role it has within product-process design and analysis. Different modelling issues related to development and application of systematic model-based solution approaches for product-process design is discussed and the need for a hybrid...... model-based framework is highlighted. This framework should be able to manage knowledge-data, models, and associated methods and tools integrated with design work-flows and data-flows for specific product-process design problems. In particular, the framework needs to manage models of different types......, forms and complexity, together with their associated parameters. An example of a model-based system for design of chemicals based formulated products is also given....

  13. Enriching step-based product information models to support product life-cycle activities

    Science.gov (United States)

    Sarigecili, Mehmet Ilteris

    The representation and management of product information in its life-cycle requires standardized data exchange protocols. Standard for Exchange of Product Model Data (STEP) is such a standard that has been used widely by the industries. Even though STEP-based product models are well defined and syntactically correct, populating product data according to these models is not easy because they are too big and disorganized. Data exchange specifications (DEXs) and templates provide re-organized information models required in data exchange of specific activities for various businesses. DEXs show us it would be possible to organize STEP-based product models in order to support different engineering activities at various stages of product life-cycle. In this study, STEP-based models are enriched and organized to support two engineering activities: materials information declaration and tolerance analysis. Due to new environmental regulations, the substance and materials information in products have to be screened closely by manufacturing industries. This requires a fast, unambiguous and complete product information exchange between the members of a supply chain. Tolerance analysis activity, on the other hand, is used to verify the functional requirements of an assembly considering the worst case (i.e., maximum and minimum) conditions for the part/assembly dimensions. Another issue with STEP-based product models is that the semantics of product data are represented implicitly. Hence, it is difficult to interpret the semantics of data for different product life-cycle phases for various application domains. OntoSTEP, developed at NIST, provides semantically enriched product models in OWL. In this thesis, we would like to present how to interpret the GD & T specifications in STEP for tolerance analysis by utilizing OntoSTEP.

  14. Palm oil based polyols for acrylated polyurethane production

    International Nuclear Information System (INIS)

    Rida Tajau; Mohd Hilmi Mahmood; Mek Zah Salleh; Khairul Zaman Mohd Dahlan; Rosley Che Ismail

    2006-01-01

    Palm oil becomes important renewable resources for the production of polyols for the polyurethane manufacturing industry. The main raw materials used for the production of acrylated polyurethane are polyols, isocyanates and hydroxyl terminated acrylate compounds. In these studies, polyurethane based natural polymer (palm oil), i.e., POBUA (Palm Oil Based Urethane Acrylate) were prepared from three different types of palm oil based polyols i.e., epoxidised palm oil (EPOP), palm oil oleic acid and refined, bleached and deodorized (RBD) palm olein based polyols. The performances of these three acrylated polyurethanes when used for coatings and adhesives were determined and compared with each other. (Author)

  15. Technology for the product and process data base

    Science.gov (United States)

    Barnes, R. D.

    1984-01-01

    The computerized product and process data base is increasingly recognized to be the cornerstone component of an overall system aimed at the integrated automation of the industrial processes of a given company or enterprise. The technology needed to support these more effective computer integrated design and manufacturing methods, especially the concept of 3-D computer-sensible product definitions rather than engineering drawings, is not fully available and rationalized. Progress is being made, however, in bridging this technology gap with concentration on the modeling of sophisticated information and data structures, high-performance interactive user interfaces and comprehensive tools for managing the resulting computerized product definition and process data base.

  16. New Products and Technologies, Based on Calculations Developed Areas

    Directory of Open Access Journals (Sweden)

    Gheorghe Vertan

    2013-09-01

    Full Text Available Following statistics, currently prosperous and have high GDP / capita, only countries that have and fructify intensively large natural resources and/or produce and export products massive based on patented inventions accordingly. Without great natural wealth and the lowest GDP / capita in the EU, Romania will prosper only with such products. Starting from the top experience in the country, some patented, can develop new and competitive technologies and patentable and exportable products, based on exact calculations of developed areas, such as that double shells welded assemblies and plating of ships' propellers and blade pump and hydraulic turbines.

  17. Product and process effectiveness using performance-based auditing techniques

    International Nuclear Information System (INIS)

    Horseman, M.L.

    1995-01-01

    Focus is the backbone of genius. Focus is the lifeblood of adequate products and effective processes. Focus is the theme of Performance-Based Audits (PBA). The Civilian Radioactive Waste Management (CRWM) Program is using the PBA tool extensively to focus on the evaluation of product adequacy and process effectiveness. The term Performance-Based Audit has been around for several years. however, the approach presented here for the systematic end-product selection, planning, and measurement of adequacy and effectiveness is new and innovative

  18. APPLICABILITY OF ACTIVITY BASED COSTING IN NEW PRODUCT DEVELOPMENT PROCESSES

    Directory of Open Access Journals (Sweden)

    Ewa Wanda MARUSZEWSKA

    2015-01-01

    Full Text Available The purpose of the article is to emphasis that activity based costing is a proper tool for engineers to enhance their deci-sion-making process while developing new product. The theoretical analysis shows that variety of factors shall be en-compassed into new product decision-making process and therefore engineers and management should pay great attention to proper cost allocation. The paper suggests the usage of Activity Based Costing methodology for new product development decision-making process. Author states that application ABC in the process of rational decision-making referring to new product development enables managers and engineers to prioritize possible solutions, and reallocate resources used in production process in order to meet wider organizational goals. It would also contribute in coopera-tion of managers and engineers for the sake of organizational goal.

  19. Combustion of animal or vegetable based liquid waste products

    International Nuclear Information System (INIS)

    Wikman, Karin; Berg, Magnus

    2002-04-01

    In this project experiences from combustion of animal and vegetable based liquid waste products have been compiled. Legal aspects have also been taken into consideration and the potential for this type of fuel on the Swedish energy market has been evaluated. Today the supply of animal and vegetable based liquid waste products for energy production in Sweden is limited. The total production of animal based liquid fat is about 10,000 tonnes annually. The animal based liquid waste products origin mainly from the manufacturing of meat and bone meal. Since meat and bone meal has been banned from use in animal feeds it is possible that the amount of animal based liquid fat will decrease. The vegetable based liquid waste products that are produced in the processing of vegetable fats are today used mainly for internal energy production. This result in limited availability on the commercial market. The potential for import of animal and vegetable based liquid waste products is estimated to be relatively large since the production of this type of waste products is larger in many other countries compared to Sweden. Vegetable oils that are used as food or raw material in industries could also be imported for combustion, but this is not reasonable today since the energy prices are relatively low. Restrictions allow import of SRM exclusively from Denmark. This is today the only limit for increased imports of animal based liquid fat. The restrictions for handle and combustion of animal and vegetable based liquid waste products are partly unclear since this is covered in several regulations that are not easy to interpret. The new directive for combustion of waste (2000/76/EG) is valid for animal based waste products but not for cadaver or vegetable based waste products from provisions industries. This study has shown that more than 27,400 tonnes of animal based liquid waste products and about 6,000 tonnes of vegetable based liquid waste products were used for combustion in Sweden

  20. Exploring policy impacts for servicising in product-based markets : A generic agent-based model

    NARCIS (Netherlands)

    van der Veen, R.A.C.; Kisjes, K.H.; Nikolic, I.

    2017-01-01

    The shift to markets based on servicising, i.e. market-level transitions from product-based to service-based production and consumption patterns, may contribute to achieve absolute decoupling, i.e. the combined development of economic growth and environmental impact reduction. However, the

  1. Simulation-based comparisons of four apparel cell production modes of one clothing production line

    Directory of Open Access Journals (Sweden)

    Guoqiang Pan

    2014-10-01

    Full Text Available Purpose: This research, by using the SIMIO simulation platform, provides a quantitative and comparative analysis of how the efficiency of four different cell production modes is affected. It is hoped that the outcomes will be of some help for garment factories to optimize their production lines. Design/methodology/approach: The SIMIO simulation platform was employed in the research and comparisons were made of the simulation test results about the four different production modes. Findings: The operation mode, number of operators, and number of buffer areas are key factors affecting the production line efficiency, and need to be reasonably set to achieve the highest efficiency. Originality/value: As most research literature so far is qualitative, this research provided a simulation-based quantitative analysis of the production efficiency under different cell production modes.

  2. A Contradiction-Based Approach for Innovative Product Design

    Directory of Open Access Journals (Sweden)

    Ko Yao-Tsung

    2016-01-01

    Full Text Available Without creativity in design there is no potential for innovation. This paper investigates the role of contradictions in enhancing creativity in product design. Based on the inventive principles of TRIZ, this paper presents a novel design method by integrating technical and physical contradiction analysis methods into the conceptual design activities of new product development (NPD. Despite the recognized importance of innovative design, there is a lack of the systematic and effective design-thinking process that can covers all conceptual design activities. To address this gap, a sharper and fundamental model of the problem-solving is created for innovative product design based on the contradiction-oriented concept. Eventually, one case study is employed to illustrate the method and the result validates that it can help designers produce more creative outcomes in product design.

  3. Obtaining and Characterization of Flux-Based Products

    Directory of Open Access Journals (Sweden)

    Cosmina Maria Bogăţean

    2015-11-01

    Full Text Available The purpose of creating this assortment was to remind the public of a long forgotten sugar based product, with a high energy value and which can be easily associated both with plain or mineral water consumption. Also we have taken into consideration the well-known '' home-made'' and ''vintage'' concepts. The purpose of this scientific research is to obtain a laboratory created product, as well as obtaining both the cocoa and the lemon sorbet. In the technological process this type of products can be redefined under a new form. The great advantage comes with the fact that it dosen't currently exit on the market and so it can be considered as being a brand new product. The anbalyses both on the raw materials and on the final deliverable product were done in the Faculty's laboratories and it was proven to meet the standars.

  4. Safety and efficacy of health supplement (Pegaga based product

    Directory of Open Access Journals (Sweden)

    Firdaus Abd Rahman

    2016-01-01

    Conclusions: Most traditional products claim contained herbs and have many indication although not proven by evidence based. Hence, consumers must be more selective before buying any health products. MOH continuing demonstrate enforcement action and educating the public in this matter. More research also must be conducted to confirm the efficacy and the appropriate dose for a particular situation either for prevention or treatment of disease.

  5. Increasing productivity based on quality management: Baked goods sector example

    DEFF Research Database (Denmark)

    Herbert-Hansen, Zaza Nadja Lee; Jacobsen, Peter

    2014-01-01

    This paper investigates productivity and quality management challenges in the food industry, illustrated by a case study of an SME-sized company in the Danish baked goods sector. Companies in the food industry are faced with challenges related to short shelf-life and changing customer demands...... as well as intense cost pressures. Quality control is largely manual and often based on the bakers’ intuition. Problems with reusing dough, production stops and quality issues contribute towards waste. This paper addresses the research question “Is there a relation between the dough, production stops...... through improved quality management are detailed. The paper concludes with recommendations for further research....

  6. Development of redesign method of production system based on QFD

    Science.gov (United States)

    Kondoh, Shinsuke; Umeda, Yasusi; Togawa, Hisashi

    In order to catch up with rapidly changing market environment, rapid and flexible redesign of production system is quite important. For effective and rapid redesign of production system, a redesign support system is eagerly needed. To this end, this paper proposes a redesign method of production system based on Quality Function Deployment (QFD). This method represents a designer's intention in the form of QFD, collects experts' knowledge as “Production Method (PM) modules,” and formulates redesign guidelines as seven redesign operations so as to support a designer to find out improvement ideas in a systematical manner. This paper also illustrates a redesign support tool of a production system we have developed based on this method, and demonstrates its feasibility with a practical example of a production system of a contact probe. A result from this example shows that comparable cost reduction to those of veteran designers can be achieved by a novice designer. From this result, we conclude our redesign method is effective and feasible for supporting redesign of a production system.

  7. Metabolic engineering of microalgal based biofuel production: prospects and challenges

    Directory of Open Access Journals (Sweden)

    Chiranjib eBanerjee

    2016-03-01

    Full Text Available The current scenario in renewable energy is focused on development of alternate and sustainable energy sources, amongst which microalgae stands as one of the promising feedstock for biofuel production. It is well known that microalgae generate much larger amounts of biofuels in a shorter time than other sources based on plant seeds. However, the greatest challenge in a transition to algae-based biofuel production is the various other complications involved in microalgal cultivation, its harvesting, concentration, drying and lipid extraction. Several green microalgae accumulate lipids, especially triacylglycerols (TAGs, which are main precursors in the production of lipid. The various aspects on metabolic pathway analysis of an oleaginous microalgae i.e. Chlamydomonas reinhardtii have elucidated some novel metabolically important genes and this enhances the lipid production in this microalgae. Adding to it, various other aspects in metabolic engineering using OptFlux and effectual bioprocess design also gives an interactive snapshot of enhancing lipid production which ultimately improvises the oil yield. This article reviews the current status of microalgal based technologies for biofuel production, bioreactor process design, flux analysis and it also provides various strategies to increase lipids accumulation via metabolic engineering.

  8. Selective Sequential Zero-Base Budgeting Procedures Based on Total Factor Productivity Indicators

    OpenAIRE

    A. Ishikawa; E. F. Sudit

    1981-01-01

    The authors' purpose in this paper is to develop productivity-based sequential budgeting procedures designed to expedite identification of major problem areas in bugetary performance, as well as to reduce the costs associated with comprehensive zero-base analyses. The concept of total factor productivity is reviewed and its relations to ordinary and zero-based budgeting are discussed in detail. An outline for a selective sequential analysis based on monitoring of three key indicators of (a) i...

  9. Production And Characterization Of Tungsten-Based Positron Moderators

    International Nuclear Information System (INIS)

    Lucio, O. G. de; Morales, J. G.; Cruz-Manjarrez, H.

    2011-01-01

    Experiments of interest in Atomic Physics require production of well-defined low-energy positron beams through a moderation process of high-energy positrons, which can be produced by either the use of a radioactive source or by accelerator based pair production process. Tungsten is one of the most commonly used moderator materials because of its reasonable efficiency, high work function and relatively low cost. In this work we present different methods to produce tungsten-based candidate moderators in a variety of shapes. We also present results from characterizing these candidate moderators by ion beam analysis and microscopy techniques.

  10. Whey based beverages - new generation of dairy products

    Directory of Open Access Journals (Sweden)

    Irena Jeličić

    2008-08-01

    Full Text Available Whey is a by product in the process of cheese production. Composition and characteristics of whey are depending on the production technology, the end product and the quality of used milk. Liquid whey consists of approximately 93% water and contains almost 50% of total solids present in the milk of which lactose is main constituent. Lactose is the main constituent of whey while proteins represent less than 1% of total solids. Minerals and vitamins are present in fewer amounts also. Production of whey based beverages started in 1970's and until today a wide range of different whey based beverages has been developed. They can be produced from native sweet or acid whey, from deproteinised whey, from native whey which was diluted with water, from whey powder or by whey fermentation. Non alcoholic whey beverages include wide range of products obtained by mixing native sweet, diluted or acid whey with different additives like tropical fruits (but also other fruits like apples, pears, strawberries or cranberries, crops and their products (mainly bran, isolates of vegetable proteins, CO2, chocolate, cocoa, vanilla extracts and other aromatizing agents. Special attention is being paid to production of fermented whey beverages with probiotic bacteria where the most important step is the choice of suitable culture of bacteria in order to produce functional beverage with high nutritional value and acceptable sensory characteristics. Non alcoholic whey beverages also include dietetic beverages, drinks with hydrolyzed lactose, milk like drinks and powder drinks. Whey is a very good raw material for production of alcoholic beverages due to the fact that the main constituent of the solid content is lactose (about 70%. Alcoholic whey beverages include drinks with small amount of alcohol (up to 1,5%, whey beer and whey wine. Whey beverages are suitable for wide range of consumers – from children to the elderly ones. They have very high nutritional value and good

  11. Physiologically Based Pharmacokinetic and Absorption Modeling for Osmotic Pump Products.

    Science.gov (United States)

    Ni, Zhanglin; Talattof, Arjang; Fan, Jianghong; Tsakalozou, Eleftheria; Sharan, Satish; Sun, Dajun; Wen, Hong; Zhao, Liang; Zhang, Xinyuan

    2017-07-01

    Physiologically based pharmacokinetic (PBPK) and absorption modeling approaches were employed for oral extended-release (ER) drug products based on an osmotic drug delivery system (osmotic pumps). The purpose was to systemically evaluate the in vivo relevance of in vitro dissolution for this type of formulation. As expected, in vitro dissolution appeared to be generally predictive of in vivo PK profiles, because of the unique feature of this delivery system that the in vitro and in vivo release of osmotic pump drug products is less susceptible to surrounding environment in the gastrointestinal (GI) tract such as pH, hydrodynamic, and food effects. The present study considered BCS (Biopharmaceutics Classification System) class 1, 2, and 3 drug products with half-lives ranging from 2 to greater than 24 h. In some cases, the colonic absorption models needed to be adjusted to account for absorption in the colon. C max (maximum plasma concentration) and AUCt (area under the concentration curve) of the studied drug products were sensitive to changes in colon permeability and segmental GI transit times in a drug product-dependent manner. While improvement of the methodology is still warranted for more precise prediction (e.g., colonic absorption and dynamic movement in the GI tract), the results from the present study further emphasized the advantage of using PBPK modeling in addressing product-specific questions arising from regulatory review and drug development.

  12. CASE-BASED PRODUCT CONFIGURATION AND REUSE IN MASS CUSTOMIZATION

    Institute of Scientific and Technical Information of China (English)

    Wang Shiwei; Tan Jianrong; Zhang Shuyou; Wang Xin; He Chenqi

    2004-01-01

    The increasing complexity and size of configuration knowledge bases requires the provision of advanced methods supporting the development of the actual configuration process and design reuse.A new framework to find a feasible and practical product configuration method is presented in mass customization.The basic idea of the approach is to integrate case-based reasoning (CBR) with a constraint satisfaction problem(CSP).The similarity measure between a crisp and range is also given,which is common in case retrieves.Based on the configuration model,a product platform and customer needs,case adaptation is carried out with the repair-based algorithm.Lastly,the methodology in the elevator configuration design domain is tested.

  13. Rice production model based on the concept of ecological footprint

    Science.gov (United States)

    Faiz, S. A.; Wicaksono, A. D.; Dinanti, D.

    2017-06-01

    Pursuant to what had been stated in Region Spatial Planning (RTRW) of Malang Regency for period 2010-2030, Malang Regency was considered as the center of agricultural development, including districts bordered with Malang City. To protect the region functioning as the provider of rice production, then the policy of sustainable food farming-land (LP2B) was made which its implementation aims to protect rice-land. In the existing condition, LP2B system was not maximally executed, and it caused a limited extend of rice-land to deliver rice production output. One cause related with the development of settlements and industries due to the effect of Malang City that converted land-function. Location of research focused on 30 villages with direct border with Malang City. Review was conducted to develop a model of relation between farming production output and ecological footprint variables. These variables include rice-land area (X1), built land percentage (X2), and number of farmers (X3). Analysis technique was regression. Result of regression indicated that the model of rice production output Y=-207,983 + 10.246X1. Rice-land area (X1) was the most influential independent variable. It was concluded that of villages directly bordered with Malang City, there were 11 villages with higher production potential because their rice production yield was more than 1,000 tons/year, while 12 villages were threatened with low production output because its rice production yield only attained 500 tons/year. Based on the model and the spatial direction of RTRW, it can be said that the direction for the farming development policy must be redesigned to maintain rice-land area on the regions on which agricultural activity was still dominant. Because rice-land area was the most influential factor to farming production. Therefore, the wider the rice-land is, the higher rice production output is on each village.

  14. Home-based radiology transcription and a productivity pay plan.

    Science.gov (United States)

    Kerr, K

    1997-01-01

    Shands Hospital in Gainesville, Fla., decided to evaluate the way it provided transcription services in its radiology department. It identified four goals: increased productivity, decreased operating expense, finding much needed space in the radiology department and increasing employee morale. The department performs 165,000 procedures annually, with 66 radiologists, 29 faculty, and 37 residents and fellows on staff. Six FTEs comprised the transcription pool in the radiology department, with transcription their only duty. Transcriptionists were paid an hourly rate based on their years of service, not their productivity. Evaluation and measurement studies were undertaken by the hospital's management systems engineering department. The transcriptionists' hours were then changed to provide coverage during the periods of heaviest dictation. The productivity level of the transcription staff was also measured and various methods of measurement reviewed. The goal was a pure incentive pay plan that would reward employees for every increase in productivity. The incentive pay plan was phased in over a three-month period. Transcriptionists were paid for work performed, with no base pay beyond minimum wage. The move to home-based transcription was planned. The necessary equipment was identified and various issues specific to working at home were addressed. Approximately six months later, the transcriptionists were set up to work at home. The astounding results achieved are presented: 28% increase in productivity, operational cost savings exceeding $25,000 and a space savings of 238 square feet.

  15. Ash-Based Building Panels Production and Demonstration of Aerock Decking Building Product

    International Nuclear Information System (INIS)

    Alan E. Bland; Jesse Newcomer

    2007-01-01

    Western Research Institute (WRI) of Laramie, Wyoming and AeRock, LLC of Eagar, Arizona (formerly of Bellevue, Washington) partnered, under sponsorship of the U.S. Department of Energy National Energy Technology Laboratory (U.S. DOE-NETL), to support the development of rapid-setting, ash-based, fiber-incorporated ''green'' building products. Green building materials are a rapidly growing trend in the building and construction industry in the US. A two phase project was implemented wherein Phase I assessed, through chemical and physical testing, ash, ash-based cement and fiber composites exhibiting superior structural performance when applied to the AeRock mixing and extrusion process and involved the conduct of pilot-scale production trials of AeRock products, and wherein Phase II involved the design, construction, and operation of a commercial-scale plant to confirm production issues and to produce panels for performance evaluations. Phase I optimized the composite ingredients including ash-based cement, Class F and Class C DFGD ash, and various fiber reinforcements. Additives, such as retardants and accelerators, were also evaluated as related to extruder performance. The optimized composite from the Phase I effort was characterized by a modulus of rupture (MOR) measured between 1,931 and 2,221 psi flexural strength, comparable to other wood and non-wood building materials. Continuous extrusion of the optimum composite in the AeRock pilot-scale facility produced an excellent product that was assembled into a demonstration for exhibit and durability purposes. Finishes, from plain to marbled, from bright reds to muted earth tones and with various textures, could easily be applied during the mixing and extrusion process. The successful pilot-scale demonstration was in turn used to design the production parameters and extruder dies for a commercial scale demonstration at Ultrapanel Pty, Ltd of Ballarat, Australia under Phase II. The initial commercial-scale production

  16. Water-based Tourism and Leisure Product Audit 2006

    OpenAIRE

    Huskyes, E.; O Connor, K.

    2006-01-01

    In consultation with key agencies and stakeholders, the Marine Institute is drafting a Development Strategy for the marine/water-based tourism and leisure sector for the period 2007-2013. Preparation and research for this has involved the completion of a Water-based Tourism and Leisure Product Audit. The Institute worked in collaboration with Royal Haskoning, spatial planning consultants, and Kevin O’Connor, Donegal County Council, to complete the audit. The objective of the audit is to syste...

  17. Enhancing product robustness in reliability-based design optimization

    International Nuclear Information System (INIS)

    Zhuang, Xiaotian; Pan, Rong; Du, Xiaoping

    2015-01-01

    Different types of uncertainties need to be addressed in a product design optimization process. In this paper, the uncertainties in both product design variables and environmental noise variables are considered. The reliability-based design optimization (RBDO) is integrated with robust product design (RPD) to concurrently reduce the production cost and the long-term operation cost, including quality loss, in the process of product design. This problem leads to a multi-objective optimization with probabilistic constraints. In addition, the model uncertainties associated with a surrogate model that is derived from numerical computation methods, such as finite element analysis, is addressed. A hierarchical experimental design approach, augmented by a sequential sampling strategy, is proposed to construct the response surface of product performance function for finding optimal design solutions. The proposed method is demonstrated through an engineering example. - Highlights: • A unifying framework for integrating RBDO and RPD is proposed. • Implicit product performance function is considered. • The design problem is solved by sequential optimization and reliability assessment. • A sequential sampling technique is developed for improving design optimization. • The comparison with traditional RBDO is provided

  18. Methods and practices to diversify cell-based products.

    Science.gov (United States)

    Vertès, Alain A

    2017-12-15

    Medicinal signaling cell (MSC)-based products represent emerging treatments in various therapeutic areas including cardiometabolic, inflammation, autoimmunity, orthopedics, wound healing and oncology. Exploring innovation beyond minimally manipulated plastic-adherent ex vivo expanded allogeneic MSCs enables product delineation. Product delineation is on the critical path to maximize clinical benefits and market access. An innovation framework is presented here along various innovation dimensions comprising composition-of-matter by means of positive cell surface markers, formulation varying for example the cell dose or the preservation mode and medium, manufacturing to adapt the secretome of MSCs to the condition of interest, the mode of delivery and corresponding delivery devices, as well as molecular engineering and biomarkers. The rationale of the innovation space thus described applies generally to all cell-based therapies.

  19. Property Based Process and Product Synthesis and Design

    DEFF Research Database (Denmark)

    Eden, Mario Richard

    2003-01-01

    in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching......This thesis describes the development of a general framework for solving process and product design problems. Targeting the desired performance of the system in a systematic manner relieves the iterative nature of conventional design techniques. Furthermore, conventional component based methods...... are not capable of handling problems, where the process or product objectives are driven by functionalities or properties rather than chemical constituency. The framework is meant to complement existing composition based methods by being able to handle property driven problems. By investigating the different...

  20. Process for the production of a dianhydrohexitol based polyester

    NARCIS (Netherlands)

    2008-01-01

    Process for the production of a polyester by the polycondensation of a mixture comprising isoidide, and a dicarboxylic acid or dicarboxylic acid anhydride, wherein the reaction is performed in the melt of the monomers and wherein these monomers are not activated. The polyesters based on one or more

  1. Competency Based Curriculum for Clothing Services and Production Sewing.

    Science.gov (United States)

    Blake, Charlotte

    Designed to meet individual needs and learning levels of high school and postsecondary students enrolled in vocational training for occupations in clothing services and production sewing, this competency-based curriculum teaches skills in alterations, dressmaking, and power sewing machine operations. Skills are organized into 13 units: Awareness…

  2. Problem-Based Learning for Production and Operations Management

    Science.gov (United States)

    Kanet, John J.; Barut, Mehmet

    2003-01-01

    In this paper, we describe our application of "problem-based learning" in the teaching of production/operations management. We describe a study of the effectiveness of this approach and present the results and analysis of this study. We provide a collection of our experiences in using this method and conclude with some general…

  3. Grid-based Simulation of Industrial Thin Film Production

    NARCIS (Netherlands)

    Krzhizhanovskaya, V.V.; Sloot, P.M.A.; Gorbachev, Y.E.

    2005-01-01

    In this article, the authors introduce a Grid-based virtual reactor, a High Level Architecture (HLA)-supported problem-solving environment that allows for detailed numerical study of industrial thin-film production in plasma-enhanced chemical vapor deposition (PECVD) reactors. They briefly describe

  4. Economic performance of community based bean seed production ...

    African Journals Online (AJOL)

    Limited access to seed of improved varieties is an impediment to agricultural productivity in sub-Saharan Africa. Researchers in the national and international agricultural research systems have been piloting a community based seed multiplication and marketing enterprises (CBSME) model, as an alternative to the formal ...

  5. Farmer evaluation of dried banana based products | Pekke | African ...

    African Journals Online (AJOL)

    A farmer participatory evaluation of dried banana based products was conducted in various districts of Uganda. Bananas were dried using a tunnel solar dryer developed by Post Harvest Handling and Storage project (PHHS) of Kawanda Post-harvest Programme and improved by the National Banana Research ...

  6. International market segmentation based on consumer-product relations

    NARCIS (Netherlands)

    ter Hofstede, F; Steenkamp, JBEM; Wedel, M

    With increasing competition in the global marketplace, international segmentation has become an ever more important issue in developing, positioning, and selling products across national borders. The authors propose a methodology to identify cross-national market segments, based on means-end chain

  7. FPGA based Control of a Production Cell System

    NARCIS (Netherlands)

    Groothuis, M.A.; van Zuijlen, Jasper J.P.; Broenink, Johannes F.

    Most motion control systems for mechatronic systems are implemented on digital computers. In this paper we present an FPGA based solution implemented on a low cost Xilinx Spartan III FPGA. A Production Cell setup with multiple parallel operating units is chosen as a test case. The embedded control

  8. Knowledge-based society, peer production and the common good

    DEFF Research Database (Denmark)

    Orsi, Cosma

    2009-01-01

    This article investigates the societal conditions that might help the establishment of peer-to-peer modes of production. First, the context within which such a new model is emerging - the neoliberal knowledge-based-societies - is described, and its shortcomings unveiled; and second, a robust argu...

  9. Understanding intentions to purchase bio-based products

    NARCIS (Netherlands)

    Onwezen, Marleen C.; Reinders, Machiel J.; Sijtsema, Siet J.

    2017-01-01

    This article aims to explore whether subjective ambivalence increases the understanding of consumers' intentions to buy bio-based products. Subjective ambivalence is the aversive feeling that accompanies evaluations containing both negative and positive elements. Two studies (N = 1851) in six

  10. Towards a (Decentralization-Based Typology of Peer Production

    Directory of Open Access Journals (Sweden)

    Melanie Dulong de Rosnay

    2016-03-01

    Full Text Available Online peer-production platforms facilitate the coordination of creative work and services. Generally considered as empowering participatory tools and a source of common good, they can also be, however, alienating instruments of digital labour. This paper proposes a typology of peer-production platforms, based on the centralization/decentralization levels of several of their design features. Between commons-based peer-production and crowdsourced, user-generated content “enclosed” by corporations, a wide range of models combine different social, political, technical and economic arrangements. This combined analysis of the level of (decentralization of platform features provides information on emancipation capabilities in a more granular way than a market-based qualification of platforms, based on the nature of ownership or business models only. The five selected features of the proposed typology are: ownership of means of production, technical architecture/design, social organization/governance of work patterns, ownership of the peer-produced resource, and value of the output.

  11. Product Lifecycle Management Architecture: A Model Based Systems Engineering Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Noonan, Nicholas James [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-07-01

    This report is an analysis of the Product Lifecycle Management (PLM) program. The analysis is centered on a need statement generated by a Nuclear Weapons (NW) customer. The need statement captured in this report creates an opportunity for the PLM to provide a robust service as a solution. Lifecycles for both the NW and PLM are analyzed using Model Based System Engineering (MBSE).

  12. Forage based animal production systems and sustainability, an invited keynote

    Directory of Open Access Journals (Sweden)

    Abdul Shakoor Chaudhry

    2008-07-01

    Full Text Available Forages are essential for the successful operation of animal production systems. This is more relevant to ruminants which are heavily dependant upon forages for their health and production in a cost-effective and sustainable manner. While forages are an economical source of nutrients for animal production, they also help conserve the soil integrity, water supply and air quality. Although the role of these forages for animal production could vary depending upon the regional preferences for the animal and forage species, climate and resources, their importance in the success of ruminant production is acknowledged. However with the increasing global human population and urbanisation, the sustainability of forage based animal production systems is sometimes questioned due to the interrelationship between animal production and the environment. It is therefore vital to examine the suitability of these systems for their place in the future to supply quality food which is safe for human consumption and available at a competitive price to the growing human population. Grassland and forage crops are recognised for their contribution to the environment, recreation and efficiency of meat and milk production,. To maintain sustainability, it is crucial that such farming systems remain profitable and environmentally friendly while producing nutritious foods of high economical value. Thus, it is pertinent to improve the nutritive value of grasses and other forage plants in order to enhance animal production to obtain quality food. It is also vital to develop new forages which are efficiently utilised and wasted less by involving efficient animals. A combination of forage legumes, fresh or conserved grasses, crop residues and other feeds could help develop an animal production system which is economically efficient, beneficial and viable. Also, it is crucial to use efficient animals, improved forage conservation methods, better manure handling, and minimum

  13. Traditional products: Base for the sustainable development of Serbian animal origin products

    Directory of Open Access Journals (Sweden)

    Stevanović Jasna Lj.

    2016-01-01

    Full Text Available Research results on the diversity of traditional products of animal origin from certain areas of the Republic of Serbia, provides an opportunity to become part of the sustainable quality development, which would be based on their promotion and protection of local resources. Traditional products of animal origin are different and inseparable from the local identity, typical for nation and its food culture. Through confidence-building, and protection from oblivion, the value of domestic products, had preserved trough centuries-old tradition. Nowadays, each domestic product has its own recognisable taste, representing climate of the Republic of Serbia, from which it comes. Universally accepted model of rural institutional structure does not exist. Instead it accommodates and develops in accordance to needs, possibilities and area specific characteristics. By the efficient protection rural models becomes an investment incentives and contribute to general economic and industrial prosperity of the society.

  14. Utilization of agro-based industrial by-products for biogas production in Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Ngoc, U.N.; Schnitzer, H. [Graz Univ. of Technology, (Austria). Inst. for Resource Efficient and Sustainable Systems; Berghold, H. [Joanneum Research Inst. for Sustainable Techniques and Systems (Austria)

    2007-07-01

    Due to the rapid rates of urbanization occurring in many countries in the world, the importance of an efficient and effective solid waste management system and the utilization/reuse of waste are more critical than ever before, especially for agricultural residues and agro-based industrial by-products. Over the past decade, the amount of solid waste generated in Vietnam has been increasing steadily. Numbers are predicted to continue to increase as well. There is significant potential to use the large amount of wastes for biogas conversion processes and for further production of commercial energy. This paper presented starts with estimation and analysis of the amounts of organic waste, agricultural residues, and agro-based industrial by-products generated from food industrial processes using general data sources for Vietnam. A laboratory study examined the use of agro-based industrial by-products and agricultural residues from cassava, sweet potato, pineapple residues, organic wastes, manures as input materials for biogas production in the anaerobic process. This paper provided an overview of Vietnam as a country, as well as a general overview of the amount of organic waste generated in the country. It also discussed the fermentation tests that were conducted to find out the potential of biogas production from some residues. It was concluded that a significant portion of waste could be reused as an environmentally sound source of energy. The utilization of agricultural residues and industrial byproducts as input materials for biogas production will not only reduce the quantity of organic waste thrown into landfills, but also reduce the negative impact on the environment. 10 refs., 7 tabs., 7 figs.

  15. Part-based deep representation for product tagging and search

    Science.gov (United States)

    Chen, Keqing

    2017-06-01

    Despite previous studies, tagging and indexing the product images remain challenging due to the large inner-class variation of the products. In the traditional methods, the quantized hand-crafted features such as SIFTs are extracted as the representation of the product images, which are not discriminative enough to handle the inner-class variation. For discriminative image representation, this paper firstly presents a novel deep convolutional neural networks (DCNNs) architect true pre-trained on a large-scale general image dataset. Compared to the traditional features, our DCNNs representation is of more discriminative power with fewer dimensions. Moreover, we incorporate the part-based model into the framework to overcome the negative effect of bad alignment and cluttered background and hence the descriptive ability of the deep representation is further enhanced. Finally, we collect and contribute a well-labeled shoe image database, i.e., the TBShoes, on which we apply the part-based deep representation for product image tagging and search, respectively. The experimental results highlight the advantages of the proposed part-based deep representation.

  16. Plate-shaped transformation products in zirconium-base alloys

    International Nuclear Information System (INIS)

    Banerjee, S.; Dey, G.K.; Srivastava, D.

    1997-01-01

    Plate-shaped products resulting from martensitic, diffusional, and mixed mode transformations in zirconium-base alloys are compared in the present study. These alloys are particularly suitable for the comparison in view of the fact that the lattice correspondence between the parent β (bcc) and the product α (hcp) or γ-hydride (fct) phases are remarkably similar for different types of transformations. Crystallographic features such as orientation relations, habit planes, and interface structures associated with these transformations have been compared, with a view toward examining whether the transformation mechanisms have characteristic imprints on these experimental observables

  17. Editorial: from plant biotechnology to bio-based products.

    Science.gov (United States)

    Stöger, Eva

    2013-10-01

    From plant biotechnology to bio-based products - this Special Issue of Biotechnology Journal is dedicated to plant biotechnology and is edited by Prof. Eva Stöger (University of Natural Resources and Life Sciences, Vienna, Austria). The Special Issue covers a wide range of topics in plant biotechnology, including metabolic engineering of biosynthesis pathways in plants; taking advantage of the scalability of the plant system for the production of innovative materials; as well as the regulatory challenges and society acceptance of plant biotechnology. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Resource-based optimization of electric power production (in Iran)

    International Nuclear Information System (INIS)

    Sadeghzadeh, Mohammad

    1999-01-01

    This paper is about electric power production optimization and chiefly discusses on the types of resources available in Iran. The modeling has been based on the marginal cost of different energy resources and types of technologies used. the computed costs are the basic standards for optimization of the production system of energy. the costs associated with environmental pollution and also pollution control are considered. the present paper also studied gas fossil fuel, hydro, nuclear, renewable and co-generation of heat and power. The results are discussed and reported at the last of the paper

  19. Low cost manned Mars mission based on indigenous propellant production

    Science.gov (United States)

    Bruckner, A. P.; Cinnamon, M.; Hamling, S.; Mahn, K.; Phillips, J.; Westmark, V.

    1993-01-01

    The paper describes a low-cost approach to the manned exploration of Mars (which involves an unmanned mission followed two years later by a manned mission) based on near-term technologies and in situ propellant production. Particular attention is given to the basic mission architecture and its major components, including the orbital analysis, the unmanned segment, the Earth Return Vehicle, the aerobrake design, life sciences, guidance, communications, power, propellant production, the surface rovers, and Mars science. Also discussed are the cost per mission over an assumed 8-yr initiative.

  20. Chitosan-based polyherbal toothpaste: As novel oral hygiene product

    Directory of Open Access Journals (Sweden)

    Mohire Nitin

    2010-01-01

    Full Text Available Objective: The objective of the present work was to develop chitosan-based polyherbal toothpaste and evaluate its plaque-reducing potential and efficacy in reduction of dental pathogens. Materials and Methods: Antimicrobial activity of herbal extracts against dental pathogens were performed by using disk diffusion method. The pharmaceutical evaluation of toothpaste was carried out as per the US Government Tooth Paste Specifications. A 4-week clinical study was conducted in patients with oro-dental problems to evaluate the plaque removing efficacy of chitosan-based polyherbal toothpaste with commercially available chlorhexidine gluconate (0.2% w/v mouthwash as positive control. Total microbial count was carried out to determine the percentage decrease in the oral bacterial count over the period of treatment. Result: Herbal extracts were found to possess satisfactory antimicrobial activity against most of the dental pathogens. Chitosan-containing polyherbal toothpaste significantly reduces the plaque index by 70.47% and bacterial count by 85.29%, and thus fulfills the majority of esthetic and medicinal requirements of oral hygiene products. Conclusion: Chitosan-based polyherbal toothpaste proves itself as a promising novel oral hygiene product as compared with currently available oral hygiene products. A further study to confirm the exact mechanism and active constituents behind antiplaque and antimicrobial activity of chitosan-based polyherbal toothpaste and its efficacy in large number of patient population is on high demand.

  1. Cost analysis of simulated base-catalyzed biodiesel production processes

    International Nuclear Information System (INIS)

    Tasić, Marija B.; Stamenković, Olivera S.; Veljković, Vlada B.

    2014-01-01

    Highlights: • Two semi-continuous biodiesel production processes from sunflower oil are simulated. • Simulations were based on the kinetics of base-catalyzed methanolysis reactions. • The total energy consumption was influenced by the kinetic model. • Heterogeneous base-catalyzed process is a preferable industrial technology. - Abstract: The simulation and economic feasibility evaluation of semi-continuous biodiesel production from sunflower oil were based on the kinetics of homogeneously (Process I) and heterogeneously (Process II) base-catalyzed methanolysis reactions. The annual plant’s capacity was determined to be 8356 tonnes of biodiesel. The total energy consumption was influenced by the unit model describing the methanolysis reaction kinetics. The energy consumption of the Process II was more than 2.5 times lower than that of the Process I. Also, the simulation showed the Process I had more and larger process equipment units, compared with the Process II. Based on lower total capital investment costs and biodiesel selling price, the Process II was economically more feasible than the Process I. Sensitivity analysis was conducted using variable sunflower oil and biodiesel prices. Using a biodiesel selling price of 0.990 $/kg, Processes I and II were shown to be economically profitable if the sunflower oil price was 0.525 $/kg and 0.696 $/kg, respectively

  2. Detecting weather radar clutter using satellite-based nowcasting products

    DEFF Research Database (Denmark)

    Jensen, Thomas B.S.; Gill, Rashpal S.; Overgaard, Søren

    2006-01-01

    This contribution presents the initial results from experiments with detection of weather radar clutter by information fusion with satellite based nowcasting products. Previous studies using information fusion of weather radar data and first generation Meteosat imagery have shown promising results...... for the detecting and removal of clutter. Naturally, the improved spatio-temporal resolution of the Meteosat Second Generation sensors, coupled with its increased number of spectral bands, is expected to yield even better detection accuracies. Weather radar data from three C-band Doppler weather radars...... Application Facility' of EUMETSAT and is based on multispectral images from the SEVIRI sensor of the Meteosat-8 platform. Of special interest is the 'Precipitating Clouds' product, which uses the spectral information coupled with surface temperatures from Numerical Weather Predictions to assign probabilities...

  3. Object-Based Assessment of Satellite Precipitation Products

    Directory of Open Access Journals (Sweden)

    Jingjing Li

    2016-06-01

    Full Text Available An object-based verification approach is employed to assess the performance of the commonly used high-resolution satellite precipitation products: Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks (PERSIANN, Climate Prediction center MORPHing technique (CMORPH, and Tropical Rainfall Measurement Mission (TRMM Multi-Satellite Precipitation Analysis (TMPA 3B42RT. The evaluation of the satellite precipitation products focuses on the skill of depicting the geometric features of the localized precipitation areas. Seasonal variability of the performances of these products against the ground observations is investigated through the examples of warm and cold seasons. It is found that PERSIANN is capable of depicting the orientation of the localized precipitation areas in both seasons. CMORPH has the ability to capture the sizes of the localized precipitation areas and performs the best in the overall assessment for both seasons. 3B42RT is capable of depicting the location of the precipitation areas for both seasons. In addition, all of the products perform better on capturing the sizes and centroids of precipitation areas in the warm season than in the cold season, while they perform better on depicting the intersection area and orientation in the cold season than in the warm season. These products are more skillful on correctly detecting the localized precipitation areas against the observations in the warm season than in the cold season.

  4. Knowledge based decision making: perspective on natural gas production

    Energy Technology Data Exchange (ETDEWEB)

    Ydstie, B. Erik; Stuland, Kjetil M.

    2009-07-01

    Conclusions (drawn by the author): Decarbonization of energy sources - From coal to renewable. Natural Gas Abundantly available - Norway is no. 3 exporter. Natural gas important as - Hydrogen source for chemicals; - Electricity; - End consumer usage (heating etc). Large potential for application of model based decision making; - Where and when to install platforms and drill wells - How to operate platforms and pipeline systems; - How to operate and optimize chemical production; - Optimization of electricity generation systems. (author)

  5. Reconceptualizing cancer immunotherapy based on plant production systems

    OpenAIRE

    Hefferon, Kathleen

    2017-01-01

    Plants can be used as inexpensive and facile production platforms for vaccines and other biopharmaceuticals. More recently, plant-based biologics have expanded to include cancer immunotherapy agents. The following review describes the current state of the art for plant-derived strategies to prevent or reduce cancers. The review discusses avenues taken to prevent infection by oncogenic viruses, solid tumors and lymphomas. Strategies including cancer vaccines, monoclonal antibodies and virus na...

  6. Reconceptualizing cancer immunotherapy based on plant production systems

    Science.gov (United States)

    Hefferon, Kathleen

    2017-01-01

    Plants can be used as inexpensive and facile production platforms for vaccines and other biopharmaceuticals. More recently, plant-based biologics have expanded to include cancer immunotherapy agents. The following review describes the current state of the art for plant-derived strategies to prevent or reduce cancers. The review discusses avenues taken to prevent infection by oncogenic viruses, solid tumors and lymphomas. Strategies including cancer vaccines, monoclonal antibodies and virus nanoparticles are described, and examples are provided. The review ends with a discussion of the implications of plant-based cancer immunotherapy for developing countries. PMID:28884013

  7. Module-based quality system functionality evaluation in production logistics

    Energy Technology Data Exchange (ETDEWEB)

    Khabbazi, M.R.; Wikander, J.; Onori, M.; Maffei, A.; Chen, D.

    2016-07-01

    This paper addresses a comprehensive modeling and functionality evaluation of a module-based quality system in production logistics at the highest domain abstract level of business processes. All domain quality business processes and quality data transactions are modeled using BPMN and UML tools and standards at the business process and data modeling. A modular web-based prototype is developed to evaluate the models addressing the quality information system functionality requirements and modularity in production logistics through data scenarios and data queries. Using the object-oriented technique in design at the highest domain level, the proposed models are subject further development in the lower levels for the implementing case. The models are specifically able to manipulate all quality operations including remedy and control in a lot-based make-to-order production logistics system as an individual module. Due to the specification of system as domain design structure, all proposed BPMs, data models, and the actual database prototype are seen referential if not a solution as a practical “to-be” quality business process re-engineering template. This paper sets out to provide an explanatory approach using different practical technique at modeling steps as well as the prototype implementation. (Author)

  8. Environmental aspects of eucalyptus based ethanol production and use

    International Nuclear Information System (INIS)

    González-García, Sara; Moreira, Ma. Teresa; Feijoo, Gumersindo

    2012-01-01

    A renewable biofuel economy is projected as a pathway to decrease dependence on fossil fuels as well as to reduce greenhouse gases (GHG) emissions. Ethanol produced on large-scale from lignocellulosic materials is considered the automotive fuel with the highest potential. In this paper, a life cycle assessment (LCA) study was developed to evaluate the environmental implications of the production of ethanol from a fast-growing short rotation crop (SRC): eucalyptus as well as its use in a flexi-fuel vehicle (FFV). The aim of the analysis was to assess the environmental performance of three ethanol based formulations: E10, E85 and E100, in comparison with conventional gasoline. The standard framework of LCA from International Standards Organization was followed and the system boundaries included the cultivation of the eucalyptus biomass, the processing to ethanol conversion, the blending with gasoline (when required) and the final use of fuels. The environmental results show reductions in all impact categories under assessment when shifting to ethanol based fuels, excluding photochemical oxidant formation, eutrophication as well as terrestrial and marine ecotoxicity which were considerably influenced by upstream activities related to ethanol manufacture. The LCA study remarked those stages where the researchers and technicians need to work to improve the environmental performance. Special attention must be paid on ethanol production related activities, such as on-site energy generation and distillation, as well as forest activities oriented to the biomass production. The use of forest machinery with higher efficiency levels, reduction of fertilizers dose and the control of diffuse emissions from the conversion plant would improve the environmental profile. -- Highlights: ► The identification of the environmental implications of the production and use of eucalyptus based ethanol was carried out. ► Eucalyptus is a Spanish common and abundant fast-growing short

  9. Streamlined bioreactor-based production of human cartilage tissues.

    Science.gov (United States)

    Tonnarelli, B; Santoro, R; Adelaide Asnaghi, M; Wendt, D

    2016-05-27

    Engineered tissue grafts have been manufactured using methods based predominantly on traditional labour-intensive manual benchtop techniques. These methods impart significant regulatory and economic challenges, hindering the successful translation of engineered tissue products to the clinic. Alternatively, bioreactor-based production systems have the potential to overcome such limitations. In this work, we present an innovative manufacturing approach to engineer cartilage tissue within a single bioreactor system, starting from freshly isolated human primary chondrocytes, through the generation of cartilaginous tissue grafts. The limited number of primary chondrocytes that can be isolated from a small clinically-sized cartilage biopsy could be seeded and extensively expanded directly within a 3D scaffold in our perfusion bioreactor (5.4 ± 0.9 doublings in 2 weeks), bypassing conventional 2D expansion in flasks. Chondrocytes expanded in 3D scaffolds better maintained a chondrogenic phenotype than chondrocytes expanded on plastic flasks (collagen type II mRNA, 18-fold; Sox-9, 11-fold). After this "3D expansion" phase, bioreactor culture conditions were changed to subsequently support chondrogenic differentiation for two weeks. Engineered tissues based on 3D-expanded chondrocytes were more cartilaginous than tissues generated from chondrocytes previously expanded in flasks. We then demonstrated that this streamlined bioreactor-based process could be adapted to effectively generate up-scaled cartilage grafts in a size with clinical relevance (50 mm diameter). Streamlined and robust tissue engineering processes, as the one described here, may be key for the future manufacturing of grafts for clinical applications, as they facilitate the establishment of compact and closed bioreactor-based production systems, with minimal automation requirements, lower operating costs, and increased compliance to regulatory guidelines.

  10. A regression-based Kansei engineering system based on form feature lines for product form design

    Directory of Open Access Journals (Sweden)

    Yan Xiong

    2016-06-01

    Full Text Available When developing new products, it is important for a designer to understand users’ perceptions and develop product form with the corresponding perceptions. In order to establish the mapping between users’ perceptions and product design features effectively, in this study, we presented a regression-based Kansei engineering system based on form feature lines for product form design. First according to the characteristics of design concept representation, product form features–product form feature lines were defined. Second, Kansei words were chosen to describe image perceptions toward product samples. Then, multiple linear regression and support vector regression were used to construct the models, respectively, that predicted users’ image perceptions. Using mobile phones as experimental samples, Kansei prediction models were established based on the front view form feature lines of the samples. From the experimental results, these two predict models were of good adaptability. But in contrast to multiple linear regression, the predict performance of support vector regression model was better, and support vector regression is more suitable for form regression prediction. The results of the case showed that the proposed method provided an effective means for designers to manipulate product features as a whole, and it can optimize Kansei model and improve practical values.

  11. Property Model-based Tailor-made Design of Chemical-based Products

    DEFF Research Database (Denmark)

    Kalakul, Sawitree

    Computer-aided model-based methods and tools are increasingly playing important roles in chemical product design. They have the potential to very quickly search for and identify reliable product candidates that can then be verified through experiments. Inthis way, the time and resources spent...... on experiment are reduced leading to faster and cheaper to market the products. The tools also help to manage the solution of product design problems, which usually require efficient handling of model-data-knowledge from different sources and at different time and size scales. The main contribution...... the needed template for a desired product is not available. VPPD-Lab employs a suite of algorithms(such as database search, molecular and mixture blend design) and toolboxes (such asproperty calculations and property model consistency tests) for specific product property prediction, design, and/or analysis...

  12. {sup 14}C determination in different bio-based products

    Energy Technology Data Exchange (ETDEWEB)

    Santos Arévalo, Francisco-Javier, E-mail: fj.santos@csic.es [Centro Nacional de Aceleradores (Universidad de Sevilla, Consejo Superior de Investigaciones Científicas, Junta de Andalucía), Thomas Alva Edison 7, 41092 Seville (Spain); Gómez Martínez, Isabel; Agulló García, Lidia; Reina Maldonado, María-Teresa [Centro Nacional de Aceleradores (Universidad de Sevilla, Consejo Superior de Investigaciones Científicas, Junta de Andalucía), Thomas Alva Edison 7, 41092 Seville (Spain); García León, Manuel [Centro Nacional de Aceleradores (Universidad de Sevilla, Consejo Superior de Investigaciones Científicas, Junta de Andalucía), Thomas Alva Edison 7, 41092 Seville (Spain); Dpto. de Física Atómica Molecular y Nuclear, Universidad de Sevilla, Reina Mercedes s/n, 41012 Seville (Spain)

    2015-10-15

    Radiocarbon determination can be used as a tool to investigate the presence of biological elements in different bio-based products, such as biodiesel blends. These products may also be produced from fossil materials obtaining the same final molecules, so that composition is chemically indistinguishable. The amount of radiocarbon in these products can reveal how much of these biological elements have been used, usually mixed with petrol derived components, free of {sup 14}C. Some of these products are liquid and thus the handling at the laboratory is not as straightforward as with solid samples. At Centro Nacional de Aceleradores (CNA) we have tested the viability of these samples using a graphitization system coupled to an elemental analyzer used for combustion of the samples, thus avoiding any vacuum process. Samples do not follow any chemical pre-treatment procedure and are directly graphitized. Specific equipment for liquid samples related to the elemental analyzer was tested. Measurement of samples was performed by low-energy AMS at the 1 MV HVEE facility at CNA, paying special attention to background limits and reproducibility during sample preparation.

  13. Intellectual Production Supervision Perform based on RFID Smart Electricity Meter

    Science.gov (United States)

    Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

    2018-03-01

    This topic develops the RFID intelligent electricity meter production supervision project management system. The system is designed for energy meter production supervision in the management of the project schedule, quality and cost information management requirements in RFID intelligent power, and provide quantitative information more comprehensive, timely and accurate for supervision engineer and project manager management decisions, and to provide technical information for the product manufacturing stage file. From the angle of scheme analysis, design, implementation and test, the system development of production supervision project management system for RFID smart meter project is discussed. Focus on the development of the system, combined with the main business application and management mode at this stage, focuses on the energy meter to monitor progress information, quality information and cost based information on RFID intelligent power management function. The paper introduces the design scheme of the system, the overall client / server architecture, client oriented graphical user interface universal, complete the supervision of project management and interactive transaction information display, the server system of realizing the main program. The system is programmed with C# language and.NET operating environment, and the client and server platforms use Windows operating system, and the database server software uses Oracle. The overall platform supports mainstream information and standards and has good scalability.

  14. Olive Oil Based Emulsions in Frozen Puff Pastry Production

    Science.gov (United States)

    Gabriele, D.; Migliori, M.; Lupi, F. R.; de Cindio, B.

    2008-07-01

    Puff pastry is an interesting food product having different industrial applications. It is obtained by laminating layers of dough and fats, mainly shortenings or margarine, having specific properties which provides required spreading characteristic and able to retain moisture into dough. To obtain these characteristics, pastry shortenings are usually saturated fats, however the current trend in food industry is mainly oriented towards unsatured fats such as olive oil, which are thought to be safer for human health. In the present work, a new product, based on olive oil, was studied as shortening replacer in puff pastry production. To ensure the desired consistency, for the rheological matching between fat and dough, a water-in-oil emulsion was produced based on olive oil, emulsifier and a hydrophilic thickener agent able to increase material structure. Obtained materials were characterized by rheological dynamic tests in linear viscoelastic conditions, aiming to setup process and material consistency, and rheological data were analyzed by using the weak gel model. Results obtained for tested emulsions were compared to theological properties of a commercial margarine, adopted as reference value for texture and stability. Obtained emulsions are characterized by interesting rheological properties strongly dependent on emulsifier characteristics and water phase composition. However a change in process temperature during fat extrusion and dough lamination seems to be necessary to match properly typical dough rheological properties.

  15. Techno-Economic Analysis of Biofuels Production Based on Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, R. M.; Platon, A.; Satrio, J. A.; Brown, R. C.; Hsu, D. D.

    2010-11-01

    This study compares capital and production costs of two biomass-to-liquid production plants based on gasification. The first biorefinery scenario is an oxygen-fed, low-temperature (870?C), non-slagging, fluidized bed gasifier. The second scenario is an oxygen-fed, high-temperature (1,300?C), slagging, entrained flow gasifier. Both are followed by catalytic Fischer-Tropsch synthesis and hydroprocessing to naphtha-range (gasoline blend stock) and distillate-range (diesel blend stock) liquid fractions. Process modeling software (Aspen Plus) is utilized to organize the mass and energy streams and cost estimation software is used to generate equipment costs. Economic analysis is performed to estimate the capital investment and operating costs. Results show that the total capital investment required for nth plant scenarios is $610 million and $500 million for high-temperature and low-temperature scenarios, respectively. Product value (PV) for the high-temperature and low-temperature scenarios is estimated to be $4.30 and $4.80 per gallon of gasoline equivalent (GGE), respectively, based on a feedstock cost of $75 per dry short ton. Sensitivity analysis is also performed on process and economic parameters. This analysis shows that total capital investment and feedstock cost are among the most influential parameters affecting the PV.

  16. Hydrogen Production from Semiconductor-based Photocatalysis via Water Splitting

    Directory of Open Access Journals (Sweden)

    Jeffrey C. S. Wu

    2012-10-01

    Full Text Available Hydrogen is the ideal fuel for the future because it is clean, energy efficient, and abundant in nature. While various technologies can be used to generate hydrogen, only some of them can be considered environmentally friendly. Recently, solar hydrogen generated via photocatalytic water splitting has attracted tremendous attention and has been extensively studied because of its great potential for low-cost and clean hydrogen production. This paper gives a comprehensive review of the development of photocatalytic water splitting for generating hydrogen, particularly under visible-light irradiation. The topics covered include an introduction of hydrogen production technologies, a review of photocatalytic water splitting over titania and non-titania based photocatalysts, a discussion of the types of photocatalytic water-splitting approaches, and a conclusion for the current challenges and future prospects of photocatalytic water splitting. Based on the literatures reported here, the development of highly stable visible–light-active photocatalytic materials, and the design of efficient, low-cost photoreactor systems are the key for the advancement of solar-hydrogen production via photocatalytic water splitting in the future.

  17. [Safety monitoring of cell-based medicinal products (CBMPs)].

    Science.gov (United States)

    Funk, Markus B; Frech, Marion; Spranger, Robert; Keller-Stanislawski, Brigitte

    2015-11-01

    Cell-based medicinal products (CBMPs), a category of advanced-therapy medicinal products (ATMPs), are authorised for the European market by the European Commission by means of the centralized marketing authorisation. By conforming to the German Medicinal Products Act (Sec. 4b AMG), national authorisation can be granted by the Paul-Ehrlich-Institut in Germany exclusively for ATMPs not based on a routine manufacturing procedure. In both procedures, quality, efficacy, and safety are evaluated and the risk-benefit balance is assessed. For the centralised procedure, mainly controlled clinical trial data must be submitted, whereas the requirements for national procedures could be modified corresponding to the stage of development of the ATMP. After marketing authorization, the marketing authorization/license holder is obligated to report all serious adverse reactions to the competent authority and to provide periodic safety update reports. If necessary, post-authorization safety studies could be imposed. On the basis of these regulatory measures, the safety of advanced therapies can be monitored and improved.

  18. Plant-based fertilizers for organic vegetable production

    DEFF Research Database (Denmark)

    Sørensen, Jørn Nygaard; Thorup-Kristensen, Kristian

    2011-01-01

    To ensure high yield and quality in organic vegetable production, crops often require additional fertilizer applied during the season. Due to the risk of contamination of edible plant products from slurry, plant-based fertilizers may be used as an alternative. The purpose of our work was to develop...... fertility, the term “mobile green manures” is used for green-manure crops that are harvested in one field and then moved as a whole and used as fertilizer in other fields. To further investigate mobile-green-manure crops for use as efficient fertilizers, pot and field experiments were conducted...... with cauliflower (Brassica oleracea botrytis) and kale (Brassica oleracea sabellica) supplied with organic matter consisting of a wide range of plant species with varying nutrient concentrations. Further, field experiments were conducted with leek (Allium porrum) and celery (Apium graveolens dulce) supplied...

  19. A comparative review of petroleum-based and bio-based acrolein production.

    Science.gov (United States)

    Liu, Lu; Ye, X Philip; Bozell, Joseph J

    2012-07-01

    Acrolein is an important chemical intermediate for many common industrial chemicals, leading to an array of useful end products. This paper reviews all the synthetic methods, including the former (aldol condensation) and contemporary (partial oxidation of propylene) manufacturing methods, the partial oxidation of propane, and most importantly, the bio-based glycerol-dehydration route. Emphasis is placed on the petroleum-based route from propylene and the bio-based route from glycerol, an abundantly available and relatively inexpensive raw material available from biodiesel production. This review provides technical details and incentives for industrial proyduction that justify a transition toward bio-based acrolein production. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Gradient-based methods for production optimization of oil reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Suwartadi, Eka

    2012-07-01

    Production optimization for water flooding in the secondary phase of oil recovery is the main topic in this thesis. The emphasis has been on numerical optimization algorithms, tested on case examples using simple hypothetical oil reservoirs. Gradientbased optimization, which utilizes adjoint-based gradient computation, is used to solve the optimization problems. The first contribution of this thesis is to address output constraint problems. These kinds of constraints are natural in production optimization. Limiting total water production and water cut at producer wells are examples of such constraints. To maintain the feasibility of an optimization solution, a Lagrangian barrier method is proposed to handle the output constraints. This method incorporates the output constraints into the objective function, thus avoiding additional computations for the constraints gradient (Jacobian) which may be detrimental to the efficiency of the adjoint method. The second contribution is the study of the use of second-order adjoint-gradient information for production optimization. In order to speedup convergence rate in the optimization, one usually uses quasi-Newton approaches such as BFGS and SR1 methods. These methods compute an approximation of the inverse of the Hessian matrix given the first-order gradient from the adjoint method. The methods may not give significant speedup if the Hessian is ill-conditioned. We have developed and implemented the Hessian matrix computation using the adjoint method. Due to high computational cost of the Newton method itself, we instead compute the Hessian-timesvector product which is used in a conjugate gradient algorithm. Finally, the last contribution of this thesis is on surrogate optimization for water flooding in the presence of the output constraints. Two kinds of model order reduction techniques are applied to build surrogate models. These are proper orthogonal decomposition (POD) and the discrete empirical interpolation method (DEIM

  1. [Production of a carp-based hamburger-like product by reducing the water activity].

    Science.gov (United States)

    Santillán, M; Morales, L J

    1992-06-01

    The experimental conditions were determined in order to conserve lean fish by means of combined factors based on Aw and pH reduction as well as the addition of an antifungal. Theoretical Aw was determined in formulas containing fish, sodium chloride, glycerol and sorbitol applying a mathematic model. From the results of the prediction, 4 formulas were prepared experimentally with (Cyprinus carpio). Phosphoric acid was added to the products in order to obtain a 5.5-6.0 pH. The final formulas were packed in plastic bags and stored with a control product (100% carp pulp) at 25 +/- 2 degrees C and 38 +/- 3% R.H. during one month. Aw, water content and pH determinations were carried at weekly intervals. Results indicated a slight but significative (P < 0.025) lowering of Aw, water content and pH. Microbiological analysis showed an increase in MAB count with no growth of pathogens. A control product (100% carp pulp) was deteriorated in a five day period. Sensory evaluation of the products indicated a slight acceptance among an inexperienced panel.

  2. Sorbent-based Oxygen Production for Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sethi, Vijay [Western Research Inst. (WRI), Laramie, WY (United States)

    2017-01-31

    Project DE-FE0024075 deals with the development of a moderate-temperature sorbent-based oxygen production technology. Sorbent-based oxygen production process utilizes oxygen-storage properties of Perovskites to (1) adsorb oxygen from air in a solid sorbent, and (2) release the adsorbed oxygen into a sweep gas such as CO2 and/or steam for gasification systems or recycled flue gas for oxy-combustion systems. Pure oxygen can be produced by the use of vacuum instead of a sweep gas to affect the pressure swing. By developing more efficient and stable, higher sorption capacity, newer class of materials operating at moderate temperatures this process represents a major advancement in air separation technology. Newly developed perovskite ceramic sorbent materials with order-disorder transition have a higher O2 adsorption capacity, potentially 200 °C lower operating temperatures, and up to two orders of magnitude faster desorption rates than those used in earlier development efforts. The performance advancements afforded by the new materials lead to substantial savings in capital investment and operational costs. Cost of producing oxygen using sorbents could be as much as 26% lower than VPSA and about 13% lower than a large cryogenic air separation unit. Cost advantage against large cryogenic separation is limited because sorbent-based separation numbers up sorbent modules for achieving the larger capacity.

  3. Artificial Leaf Based on Artificial Photosynthesis for Solar Fuel Production

    Science.gov (United States)

    2017-06-30

    collect light energy and separate charge for developing new types of nanobiodevices to construct ”artificial leaf” from solar to fuel. or Concept of...AFRL-AFOSR-JP-TR-2017-0054 Artificial Leaf Based on Artificial Photosynthesis for Solar Fuel Production Mamoru Nango NAGOYA INSTITUTE OF TECHNOLOGY...display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ORGANIZATION. 1. REPORT DATE (DD-MM-YYYY)      30-06-2017 2

  4. 68Ga-Based Radiopharmaceuticals: Production and Application Relationship

    Directory of Open Access Journals (Sweden)

    Irina Velikyan

    2015-07-01

    Full Text Available The contribution of 68Ga to the promotion and expansion of clinical research and routine positron emission tomography (PET for earlier better diagnostics and individualized medicine is considerable. The potential applications of 68Ga-comprising imaging agents include targeted, pre-targeted and non-targeted imaging. This review discusses the key aspects of the production of 68Ga and 68Ga-based radiopharmaceuticals in the light of the impact of regulatory requirements and endpoint pre-clinical and clinical applications.

  5. Laser-induced production of large carbon-based toroids

    International Nuclear Information System (INIS)

    Lyn, M. Elizabeth; He Jibao; Koplitz, Brent

    2005-01-01

    We report on the production of large carbon-based toroids (CBTs) from fullerenes. The process involves two-step laser irradiation of a mixed fullerene target (76% C 60 , 22% C 70 ). Transmission electron microscopy (TEM) clearly identifies toroidal-shaped structures as well as Q-shaped constructs. The typical diameters of the CBTs are ∼0.2-0.3 μm with tubular diameters of ∼50-100 nm, but toroids as wide as 0.5 μm are observed making them nanostructures on the verge of being microstructures

  6. Product-based Safety Certification for Medical Devices Embedded Software.

    Science.gov (United States)

    Neto, José Augusto; Figueiredo Damásio, Jemerson; Monthaler, Paul; Morais, Misael

    2015-01-01

    Worldwide medical device embedded software certification practices are currently focused on manufacturing best practices. In Brazil, the national regulatory agency does not hold a local certification process for software-intensive medical devices and admits international certification (e.g. FDA and CE) from local and international industry to operate in the Brazilian health care market. We present here a product-based certification process as a candidate process to support the Brazilian regulatory agency ANVISA in medical device software regulation. Center of Strategic Technology for Healthcare (NUTES) medical device embedded software certification is based on a solid safety quality model and has been tested with reasonable success against the Class I risk device Generic Infusion Pump (GIP).

  7. Nitrous Oxide Production in a Granule-based Partial Nitritation Reactor: A Model-based Evaluation.

    Science.gov (United States)

    Peng, Lai; Sun, Jing; Liu, Yiwen; Dai, Xiaohu; Ni, Bing-Jie

    2017-04-03

    Sustainable wastewater treatment has been attracting increasing attentions over the past decades. However, the production of nitrous oxide (N 2 O), a potent GHG, from the energy-efficient granule-based autotrophic nitrogen removal is largely unknown. This study applied a previously established N 2 O model, which incorporated two N 2 O production pathways by ammonia-oxidizing bacteria (AOB) (AOB denitrification and the hydroxylamine (NH 2 OH) oxidation). The two-pathway model was used to describe N 2 O production from a granule-based partial nitritation (PN) reactor and provide insights into the N 2 O distribution inside granules. The model was evaluated by comparing simulation results with N 2 O monitoring profiles as well as isotopic measurement data from the PN reactor. The model demonstrated its good predictive ability against N 2 O dynamics and provided useful information about the shift of N 2 O production pathways inside granules for the first time. The simulation results indicated that the increase of oxygen concentration and granule size would significantly enhance N 2 O production. The results further revealed a linear relationship between N 2 O production and ammonia oxidation rate (AOR) (R 2  = 0.99) under the conditions of varying oxygen levels and granule diameters, suggesting that bulk oxygen and granule size may exert an indirect effect on N 2 O production by causing a change in AOR.

  8. Impact of Oat-Based Products on Human Gastrointestinal Tract

    Directory of Open Access Journals (Sweden)

    Staka Aiga

    2015-09-01

    Full Text Available Oat is rich in valuable nutrients. In comparison to other cereals, oat contains more total proteins, carbohydrate, fat, non-starch fibre, as well as unique antioxidants (one of them - avenanthramides, vitamins, and minerals. One of the most often studied components of oats is β-glucan - a type of soluble dietary fibre located throughout the starch endosperm, but with highest concentration in the bran. Many studies have shown the beneficial health effects of oat β-glucan as a soluble dietary fibre. Until now, most of the studies on this nutrient have been conducted in the cardiovascular and diabetology field. This article aimed to review the literature on studies that investigated the effects of oat-based products on human gastrointestinal tract - gastrointestinal microflora, irritable bowel syndrome, inflammatory bowel disease as well as prevention/treatment of colorectal cancer. A literature search was conducted using PubMed database. More than 80 potential articles were identified, which were selected afterwards according to aims of our study. Studies done on human were preferred. A long-term dietary intake of oat-based products improves human intestinal microflora, could have benefits in irritable bowel syndrome, and probable effects were seen in patients with ulcerative colitis, but this remains to be proven. There are few studies regarding prevention/treatment of colorectal cancer and they do not show clear benefit nor provide recommendations.

  9. Machine vision based quality inspection of flat glass products

    Science.gov (United States)

    Zauner, G.; Schagerl, M.

    2014-03-01

    This application paper presents a machine vision solution for the quality inspection of flat glass products. A contact image sensor (CIS) is used to generate digital images of the glass surfaces. The presented machine vision based quality inspection at the end of the production line aims to classify five different glass defect types. The defect images are usually characterized by very little `image structure', i.e. homogeneous regions without distinct image texture. Additionally, these defect images usually consist of only a few pixels. At the same time the appearance of certain defect classes can be very diverse (e.g. water drops). We used simple state-of-the-art image features like histogram-based features (std. deviation, curtosis, skewness), geometric features (form factor/elongation, eccentricity, Hu-moments) and texture features (grey level run length matrix, co-occurrence matrix) to extract defect information. The main contribution of this work now lies in the systematic evaluation of various machine learning algorithms to identify appropriate classification approaches for this specific class of images. In this way, the following machine learning algorithms were compared: decision tree (J48), random forest, JRip rules, naive Bayes, Support Vector Machine (multi class), neural network (multilayer perceptron) and k-Nearest Neighbour. We used a representative image database of 2300 defect images and applied cross validation for evaluation purposes.

  10. Estimation of PV energy production based on satellite data

    Science.gov (United States)

    Mazurek, G.

    2015-09-01

    Photovoltaic (PV) technology is an attractive source of power for systems without connection to power grid. Because of seasonal variations of solar radiation, design of such a power system requires careful analysis in order to provide required reliability. In this paper we present results of three-year measurements of experimental PV system located in Poland and based on polycrystalline silicon module. Irradiation values calculated from results of ground measurements have been compared with data from solar radiation databases employ calculations from of satellite observations. Good convergence level of both data sources has been shown, especially during summer. When satellite data from the same time period is available, yearly and monthly production of PV energy can be calculated with 2% and 5% accuracy, respectively. However, monthly production during winter seems to be overestimated, especially in January. Results of this work may be helpful in forecasting performance of similar PV systems in Central Europe and allow to make more precise forecasts of PV system performance than based only on tables with long time averaged values.

  11. Sustainable production of biologically active molecules of marine based origin.

    Science.gov (United States)

    Murray, Patrick M; Moane, Siobhan; Collins, Catherine; Beletskaya, Tanya; Thomas, Olivier P; Duarte, Alysson W F; Nobre, Fernando S; Owoyemi, Ifeloju O; Pagnocca, Fernando C; Sette, L D; McHugh, Edward; Causse, Eric; Pérez-López, Paula; Feijoo, Gumersindo; Moreira, Ma T; Rubiolo, Juan; Leirós, Marta; Botana, Luis M; Pinteus, Susete; Alves, Celso; Horta, André; Pedrosa, Rui; Jeffryes, Clayton; Agathos, Spiros N; Allewaert, Celine; Verween, Annick; Vyverman, Wim; Laptev, Ivan; Sineoky, Sergei; Bisio, Angela; Manconi, Renata; Ledda, Fabio; Marchi, Mario; Pronzato, Roberto; Walsh, Daniel J

    2013-09-25

    The marine environment offers both economic and scientific potential which are relatively untapped from a biotechnological point of view. These environments whilst harsh are ironically fragile and dependent on a harmonious life form balance. Exploitation of natural resources by exhaustive wild harvesting has obvious negative environmental consequences. From a European industry perspective marine organisms are a largely underutilised resource. This is not due to lack of interest but due to a lack of choice the industry faces for cost competitive, sustainable and environmentally conscientious product alternatives. Knowledge of the biotechnological potential of marine organisms together with the development of sustainable systems for their cultivation, processing and utilisation are essential. In 2010, the European Commission recognised this need and funded a collaborative RTD/SME project under the Framework 7-Knowledge Based Bio-Economy (KBBE) Theme 2 Programme 'Sustainable culture of marine microorganisms, algae and/or invertebrates for high value added products'. The scope of that project entitled 'Sustainable Production of Biologically Active Molecules of Marine Based Origin' (BAMMBO) is outlined. Although the Union is a global leader in many technologies, it faces increasing competition from traditional rivals and emerging economies alike and must therefore improve its innovation performance. For this reason innovation is placed at the heart of a European Horizon 2020 Strategy wherein the challenge is to connect economic performance to eco performance. This article provides a synopsis of the research activities of the BAMMBO project as they fit within the wider scope of sustainable environmentally conscientious marine resource exploitation for high-value biomolecules. Copyright © 2013 Elsevier B.V. All rights reserved.

  12. Production Task Queue Optimization Based on Multi-Attribute Evaluation for Complex Product Assembly Workshop.

    Science.gov (United States)

    Li, Lian-Hui; Mo, Rong

    2015-01-01

    The production task queue has a great significance for manufacturing resource allocation and scheduling decision. Man-made qualitative queue optimization method has a poor effect and makes the application difficult. A production task queue optimization method is proposed based on multi-attribute evaluation. According to the task attributes, the hierarchical multi-attribute model is established and the indicator quantization methods are given. To calculate the objective indicator weight, criteria importance through intercriteria correlation (CRITIC) is selected from three usual methods. To calculate the subjective indicator weight, BP neural network is used to determine the judge importance degree, and then the trapezoid fuzzy scale-rough AHP considering the judge importance degree is put forward. The balanced weight, which integrates the objective weight and the subjective weight, is calculated base on multi-weight contribution balance model. The technique for order preference by similarity to an ideal solution (TOPSIS) improved by replacing Euclidean distance with relative entropy distance is used to sequence the tasks and optimize the queue by the weighted indicator value. A case study is given to illustrate its correctness and feasibility.

  13. Production Task Queue Optimization Based on Multi-Attribute Evaluation for Complex Product Assembly Workshop.

    Directory of Open Access Journals (Sweden)

    Lian-Hui Li

    Full Text Available The production task queue has a great significance for manufacturing resource allocation and scheduling decision. Man-made qualitative queue optimization method has a poor effect and makes the application difficult. A production task queue optimization method is proposed based on multi-attribute evaluation. According to the task attributes, the hierarchical multi-attribute model is established and the indicator quantization methods are given. To calculate the objective indicator weight, criteria importance through intercriteria correlation (CRITIC is selected from three usual methods. To calculate the subjective indicator weight, BP neural network is used to determine the judge importance degree, and then the trapezoid fuzzy scale-rough AHP considering the judge importance degree is put forward. The balanced weight, which integrates the objective weight and the subjective weight, is calculated base on multi-weight contribution balance model. The technique for order preference by similarity to an ideal solution (TOPSIS improved by replacing Euclidean distance with relative entropy distance is used to sequence the tasks and optimize the queue by the weighted indicator value. A case study is given to illustrate its correctness and feasibility.

  14. Influence of clay mineralogy on clay based ceramic products

    International Nuclear Information System (INIS)

    Radzali Othman; Tuan Besar Tuan Sarif; Zainal Arifin Ahmad; Ahmad Fauzi Mohd Noor; Abu Bakar Aramjat

    1996-01-01

    Clay-based ceramic products can either be produced directly from a suitable clay source without the need further addition or such products can be produced from a ceramic body formulated by additions of other raw materials such as feldspar and silica sand. In either case, the mineralogical make-up of the clay component plays a dominating role in the fabrication and properties of the ceramic product. This study was sparked off by a peculiar result observed in one of five local ball clay samples that were used to reformulate a ceramic body. Initial characterisation tests conducted on the clays indicated that these clays can be classified as kaolinitic. However, one of these clays produced a ceramic body that is distinctively different in terms of whiteness, smoothness and density as compared to the other four clays. Careful re-examination of other characterisation data, such as particle size distribution and chemical analysis, failed to offer any plausible explanation. Consequently, the mineralogical analysis by x-ray diffraction was repeated by paying meticulous attention to specimen preparation. Diffraction data for the clay with anomalous behaviour indicated the presence of a ∼ 10A peak that diminished when the same specimen was re-tested after heating in an oven at 12O degree C whilst the other four clays only exhibit the characteristic kaolinite (Al sub 2 O sub 3. 2SiO sub 2. 2H sub 2 0) and muscovite peaks at ∼ 7A and ∼ 10A before and after heat treatment. This suggests the presence of the mineral halloysite (A1 sub 2 0 sub 3. 2SiO sub 2.4H sub 2 0) in that particular clay. This difference in mineralogy can be attributed to account for the variations in physical properties of the final product. Consequently, this paper reviews in general the precautionary measures that must be adhered to during any mineralogical investigation of clay minerals or clay-based materials. The common pitfalls during specimen preparation, machine settings and interpretation of

  15. Formulating natural based cosmetic product - irradiated herbal lip balm

    International Nuclear Information System (INIS)

    Seri Chempaka Mohd Yusof; Ros Anita Ahmad Ramli; Foziah Ali; Zainab Harun

    2007-01-01

    Herbal lip balm was formulated in efforts to produce a safe product, attractive with multifunctional usage i.e. prevent chap lips, reduce mouth odour and benefits in improving the health quality. Problems faced in constructing formulations of herbal lip balm were focused to the extraction of anthocyanins, the stability of the pigments in the formulations and changes of colour during irradiation for the sterilization of herbal lip balm. Natural pigment, anthocyanin was used as a colorant agent in herbal lip balm, obtained from various herbs and vegetables i.e. Hibiscus sabdariffa L. (roselle), Brassica oleracea var. capitata f. rubra (red cabbage) and Daucus carota (carrot). Water based extraction method was used in extracting the anthocyanins. The incorporation of honey in the formulations improved the colour of the lip balm. The usage of plant based ingredient i.e. cocoa butter substituting the normal based ingredient i.e. petroleum jelly in lip balm also affecting the colour of herbal lip balm. Irradiation at 2.5, 5.0 and 10 kGy was carried out as preservation and reducing of microbial load of the herbal lip balm and changes in colour were observed in formulations irradiated at 10 kGy. (Author)

  16. Scalable Production of Graphene-Based Wearable E-Textiles.

    Science.gov (United States)

    Karim, Nazmul; Afroj, Shaila; Tan, Sirui; He, Pei; Fernando, Anura; Carr, Chris; Novoselov, Kostya S

    2017-12-26

    Graphene-based wearable e-textiles are considered to be promising due to their advantages over traditional metal-based technology. However, the manufacturing process is complex and currently not suitable for industrial scale application. Here we report a simple, scalable, and cost-effective method of producing graphene-based wearable e-textiles through the chemical reduction of graphene oxide (GO) to make stable reduced graphene oxide (rGO) dispersion which can then be applied to the textile fabric using a simple pad-dry technique. This application method allows the potential manufacture of conductive graphene e-textiles at commercial production rates of ∼150 m/min. The graphene e-textile materials produced are durable and washable with acceptable softness/hand feel. The rGO coating enhanced the tensile strength of cotton fabric and also the flexibility due to the increase in strain% at maximum load. We demonstrate the potential application of these graphene e-textiles for wearable electronics with activity monitoring sensor. This could potentially lead to a multifunctional single graphene e-textile garment that can act both as sensors and flexible heating elements powered by the energy stored in graphene textile supercapacitors.

  17. Product Quality Modelling Based on Incremental Support Vector Machine

    International Nuclear Information System (INIS)

    Wang, J; Zhang, W; Qin, B; Shi, W

    2012-01-01

    Incremental Support vector machine (ISVM) is a new learning method developed in recent years based on the foundations of statistical learning theory. It is suitable for the problem of sequentially arriving field data and has been widely used for product quality prediction and production process optimization. However, the traditional ISVM learning does not consider the quality of the incremental data which may contain noise and redundant data; it will affect the learning speed and accuracy to a great extent. In order to improve SVM training speed and accuracy, a modified incremental support vector machine (MISVM) is proposed in this paper. Firstly, the margin vectors are extracted according to the Karush-Kuhn-Tucker (KKT) condition; then the distance from the margin vectors to the final decision hyperplane is calculated to evaluate the importance of margin vectors, where the margin vectors are removed while their distance exceed the specified value; finally, the original SVs and remaining margin vectors are used to update the SVM. The proposed MISVM can not only eliminate the unimportant samples such as noise samples, but also can preserve the important samples. The MISVM has been experimented on two public data and one field data of zinc coating weight in strip hot-dip galvanizing, and the results shows that the proposed method can improve the prediction accuracy and the training speed effectively. Furthermore, it can provide the necessary decision supports and analysis tools for auto control of product quality, and also can extend to other process industries, such as chemical process and manufacturing process.

  18. Sugar-Based Ethanol Biorefinery: Ethanol, Succinic Acid and By-Product Production

    Energy Technology Data Exchange (ETDEWEB)

    Donal F. Day

    2009-03-31

    The work conducted in this project is an extension of the developments itemized in DE-FG-36-04GO14236. This program is designed to help the development of a biorefinery based around a raw sugar mill, which in Louisiana is an underutilized asset. Some technical questions were answered regarding the addition of a biomass to ethanol facility to existing sugar mills. The focus of this work is on developing technology to produce ethanol and valuable by-products from bagasse. Three major areas are addressed, feedstock storage, potential by-products and the technology for producing ethanol from dilute ammonia pre-treated bagasse. Sugar mills normally store bagasse in a simple pile. During the off season there is a natural degradation of the bagasse, due to the composting action of microorganisms in the pile. This has serious implications if bagasse must be stored to operate a bagasse/biorefinery for a 300+ day operating cycle. Deterioration of the fermentables in bagasse was found to be 6.5% per month, on pile storage. This indicates that long term storage of adequate amounts of bagasse for year-round operation is probably not feasible. Lignin from pretreatment seemed to offer a potential source of valuable by-products. Although a wide range of phenolic compounds were present in the effluent from dilute ammonia pretreatment, the concentrations of each (except for benzoic acid) were too low to consider for extraction. The cellulosic hydrolysis system was modified to produce commercially recoverable quantities of cellobiose, which has a small but growing market in the food process industries. A spin-off of this led to the production of a specific oligosaccharide which appears to have both medical and commercial implications as a fungal growth inhibitor. An alternate use of sugars produced from biomass hydrolysis would be to produce succinic acid as a chemical feedstock for other conversions. An organism was developed which can do this bioconversion, but the economics of

  19. Solar Thermochemical Hydrogen Production via Terbium Oxide Based Redox Reactions

    Directory of Open Access Journals (Sweden)

    Rahul Bhosale

    2016-01-01

    Full Text Available The computational thermodynamic modeling of the terbium oxide based two-step solar thermochemical water splitting (Tb-WS cycle is reported. The 1st step of the Tb-WS cycle involves thermal reduction of TbO2 into Tb and O2, whereas the 2nd step corresponds to the production of H2 through Tb oxidation by water splitting reaction. Equilibrium compositions associated with the thermal reduction and water splitting steps were determined via HSC simulations. Influence of oxygen partial pressure in the inert gas on thermal reduction of TbO2 and effect of water splitting temperature (TL on Gibbs free energy related to the H2 production step were examined in detail. The cycle (ηcycle and solar-to-fuel energy conversion (ηsolar-to-fuel efficiency of the Tb-WS cycle were determined by performing the second-law thermodynamic analysis. Results obtained indicate that ηcycle and ηsolar-to-fuel increase with the decrease in oxygen partial pressure in the inert flushing gas and thermal reduction temperature (TH. It was also realized that the recuperation of the heat released by the water splitting reactor and quench unit further enhances the solar reactor efficiency. At TH=2280 K, by applying 60% heat recuperation, maximum ηcycle of 39.0% and ηsolar-to-fuel of 47.1% for the Tb-WS cycle can be attained.

  20. Intensification of biogas production using pretreatment based on hydrodynamic cavitation.

    Science.gov (United States)

    Patil, Pankaj N; Gogate, Parag R; Csoka, Levente; Dregelyi-Kiss, Agota; Horvath, Miklos

    2016-05-01

    The present work investigates the application of hydrodynamic cavitation (HC) for the pretreatment of wheat straw with an objective of enhancing the biogas production. The hydrodynamic cavitation reactor is based on a stator and rotor assembly. The effect of three different speeds of rotor (2300, 2500, 2700 rpm), wheat straw to water ratios (0.5%, 1% and 1.5% wt/wt) and also treatment times as 2, 4 and 6 min have been investigated in the work using the design of experiments (DOE) approach. It was observed that the methane yield of 31.8 ml was obtained with untreated wheat straw whereas 77.9 ml was obtained with HC pre-treated wheat straw confirming the favourable changes during the pre-treatment. The combined pre-treatment using KOH and HC gave maximum yield of biogas as 172.3 ml. Overall, it has been established that significant enhancement in the biogas production can be obtained due to the pretreatment using HC which can also be further intensified by combination with chemical treatment. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Textural and sensorial characterization of a new oat based product

    Directory of Open Access Journals (Sweden)

    Alina STURZA

    2016-11-01

    Full Text Available Oat it is known as a cereal which provides numerous health benefits due to its composition. Likewise, hemp, flax and olive oils are rich in compounds required for the wellness maintenance and in prevention and treatment of various diseases. Thanks to advances of last decades in the food industry, it can be said that the rheological measurements have become indispensable in order to obtain a quality product. The aim of this work was to develop and optimize a technology for obtaining  unfermented dough, respectively, to obtain oat based unleavened bread. The characterization of the final product from a sensorial point of view was performed, analysis very important for assessing the consumers acceptance. In the meantime the texture properties of all samples were instrumentally determined. Textural profile showed that samples containing higher percent of oil content had a lower hardness than those with reduced percent of oil. The most appreciated unleavened oat bread was dried at 150˚C and had a low content of oil.

  2. The use of niobium based catalysts for liquid fuel production

    Directory of Open Access Journals (Sweden)

    Reguera Frank Martin

    2004-01-01

    Full Text Available The catalytic properties of niobium based catalysts were investigated in the conversion of oleic acid to liquid fuels at atmospheric pressure and at 623 K. The catalytic tests were performed in a fixed bed and continuous flow reactor using an acid to catalyst ratio equal to 4 and N2 as carrier gas. The reaction products were analyzed by gas chromatography and acidity measurements. NH3 temperature programmed desorption, N2 adsorption-desorption (BET method and Xray diffraction were also performed in order to determine the structural and acidic properties of the catalysts. From the catalytic tests, it was detected the formation of compounds in the range of gasoline, diesel and lubricant oils. Higher catalytic activity and selectivity for diesel fuel were observed for the catalysts NbOPO4 and H3PO4/Nb2O5 that possesses higher acidities and surface areas.

  3. Observations of cellular transformation products in nickel-base superalloys

    International Nuclear Information System (INIS)

    Barlow, C.Y.; Ralph, B.

    1979-01-01

    Transmission electron microscopy has been used to identify the products in cellularly transformed regions of alloys based on the Nimonic 80 A composition. The commercial alloy is shown to undergo a small degree of cellular transformation even after conventional heat treatments, while recrystallization is found to increase the incidence of this reaction type. Low carbon versions of this alloy demonstrate cellular precipitation over a wider range of heat treatments. It is shown that the cellular reaction may take place in these alloys under a variety of different conditions and with a range of driving forces. Reasons for this unexpected behaviour are offeredm as is a suggestion as to why the cellular reaction occurs on a local scale. (author)

  4. Information Sharing In Shipbuilding based on the Product State Model

    DEFF Research Database (Denmark)

    Larsen, Michael Holm

    1999-01-01

    The paper provides a review of product modelling technologies and the overall architecture for the Product State Model (PSM) environment as a basis for how dynamically updated product data can improve control of production activities. Especially, the paper focuses on the circumstances prevailing...

  5. Value chain analysis on cassava and cassava based - products in ...

    African Journals Online (AJOL)

    This study examined the value Chain analysis (production process and cost related to each element of production chain to add value) on cassava and cassava products in Imo State specifically to ascertain the farm size holdings of the respondents as well as the ownerships of the land used for production. It also identified` ...

  6. Test marketing for value-added root and tuber based products in ...

    African Journals Online (AJOL)

    Test marketing for value-added root and tuber based products in Ikwuano local government area ... JE Ewuziem, C Aniedu, E Oti, VO Onyenobi ... root and tuber based products, developed at National Root Crops Research Institute, Umudike.

  7. Whey Based Bioactive Peptides Used in Animal Products

    Directory of Open Access Journals (Sweden)

    Ayse Demet Karaman

    2016-10-01

    Full Text Available Bioactive peptides come out as a result of the hydrolysis of milk proteins and contain nutritional, functional and biological activities. Nowadays, the utilization of whey proteins to provide various features in the animal products such as meat and milk products and animal production has been increasing. In this compilation, after being introduced some general information about their common characteristics, bioactive peptides will be mentioned about their particularly recent usage in animal products.

  8. Development and Implementation of Production Area of Agricultural Product Data Collection System Based on Embedded System

    Science.gov (United States)

    Xi, Lei; Guo, Wei; Che, Yinchao; Zhang, Hao; Wang, Qiang; Ma, Xinming

    To solve problems in detecting the origin of agricultural products, this paper brings about an embedded data-based terminal, applies middleware thinking, and provides reusable long-range two-way data exchange module between business equipment and data acquisition systems. The system is constructed by data collection node and data center nodes. Data collection nodes taking embedded data terminal NetBoxII as the core, consisting of data acquisition interface layer, controlling information layer and data exchange layer, completing the data reading of different front-end acquisition equipments, and packing the data TCP to realize the data exchange between data center nodes according to the physical link (GPRS / CDMA / Ethernet). Data center node consists of the data exchange layer, the data persistence layer, and the business interface layer, which make the data collecting durable, and provide standardized data for business systems based on mapping relationship of collected data and business data. Relying on public communications networks, application of the system could establish the road of flow of information between the scene of origin certification and management center, and could realize the real-time collection, storage and processing between data of origin certification scene and databases of certification organization, and could achieve needs of long-range detection of agricultural origin.

  9. Evidence Based Decline in Coconut Productivity along the Coastline ...

    African Journals Online (AJOL)

    ... production in Tanzania due to implementation of the National Coconut Development Program (NCDP). However, since phasing out of NCDP in 2004, little is known and even less is documented on the status of coconut production and productivity in the country. This study was conducted along the coastal belt where more ...

  10. Fish product quality evaluation based on temperature monitoring in ...

    African Journals Online (AJOL)

    As one kind of perishable food, fish product is at risk of suffering various damages during cold chain and temperature is the most important factor to affect the product quality. This research work on frozen tilapia fillet was aimed at evaluating the fish product quality and predict shelf-life through monitoring temperature change ...

  11. Product evaluation based in the association between intuition and tasks.

    Science.gov (United States)

    Almeida e Silva, Caio Márcio; Okimoto, Maria Lúcia L R; Albertazzi, Deise; Calixto, Cyntia; Costa, Humberto

    2012-01-01

    This paper explores the importance of researching the intuitiveness in the product use. It approaches the intuitiveness influence for users that already had a visual experience of the product. Finally, it is suggested the use of a table that relates the tasks performed while using a product, the features for an intuitive use and the performance metric "task success".

  12. A Process-based Model of Global Lichen Productivity

    Science.gov (United States)

    Porada, P.; Kleidon, A.

    2012-04-01

    Lichens and biotic crusts are abundant in most ecosystems of the world. They are the main autotrophic organisms in many deserts and at high altitudes and they can also be found in large amounts as epiphytes in some forests, especially in the boreal zone. They are characterised by a great variety of physiological properties, such as growth form, productivity or color. Due to the vast land surface areas covered by lichens, they may contribute significantly to the global terrestrial net carbon uptake. Furthermore, they potentially play an important role with respect to nutrient cycles in some ecosystems and they have the ability to enhance weathering at the surface on which they grow. A possible way to quantify these processes at the global scale is presented here in form of a process-based lichen model. This approach is based on the concepts used in many dynamical vegetation models and extends these methods to account for the specific properties of lichens. Hence, processes such as photosynthesis, respiration and water exchange are implemented as well as important trade-offs like photosynthetic capacity versus respiratory load and water content versus CO2 conductivity. The great physiological variability of lichens is incorporated directly into the model through ranges of possible parameter values, which are randomly sampled. In this way, many artificial lichen "species" are created and climate then acts as a filter to determine the species which are able to survive permanently. By averaging over the surviving "species", the model predicts lichen productivity as a function of climate input data such as temperature, radiation and precipitation at the global scale. Consequently, the contribution of lichens to the global carbon balance can be quantified. Moreover, global patterns of lichen biodiversity and other properties can be illustrated. The model can be extended to account for the nutrient dynamics of lichens, such as nitrogen fixation and the acquisition and

  13. An Agent-based Manufacturing Management System for Production and Logistics within Cross-Company Regional and National Production Networks

    Directory of Open Access Journals (Sweden)

    T. Hanel

    2008-11-01

    Full Text Available The goal is the development of a simultaneous, dynamic, technological as well as logistical real-time planning and an organizational control of the production by the production units themselves, working in the production network under the use of Multi-Agent-Technology. The design of the multi-agent-based manufacturing management system, the models of the single agents, algorithms for the agent-based, decentralized dispatching of orders, strategies and data management concepts as well as their integration into the SCM, basing on the solution described, will be explained in the following.

  14. An Agent-Based Manufacturing Management System for Production and Logistics within Cross-Company Regional and National Production Networks

    Directory of Open Access Journals (Sweden)

    S. Heinrich

    2005-03-01

    Full Text Available The goal is the development of a simultaneous, dynamic, technological as well as logistical real-time planning and an organizational control of the production by the production units themselves, working in the production network under the use of Multi-Agent-Technology. The design of the multi-agent-based manufacturing management system, the models of the single agents, algorithms for the agent-based, decentralized dispatching of orders, strategies and data management concepts as well as their integration into the SCM, basing on the solution described, will be explained in the following.

  15. COSTING OF QUALITY IN BUSINESS BASE UNIT SEVERAL PRODUCTIONS, CIENFUEGOS

    Directory of Open Access Journals (Sweden)

    Gómez Alfonso, Elizabeth

    2013-01-01

    Full Text Available The calculation of quality costs as a component of the System of Quality Management, is a must for Cuban business managers, to provide a technique identified as an advanced instrument of management, which will lead to improved competitiveness and serve as an informative source. Identify and calculate the costs of quality, as well as propose measured plans, to promote a decrease in operating expenses, which can be used as a tool to improve processes. The Business Unit of Several Base Productions of Cienfuegos presents the fault to give way to Business Improvement and certification of its Quality Management System, according to the norm ISO 9001:2008 and the decree law 281, so that the objective research was to estimate the costs of quality processes in the company. To achieve this level were used empirical methods and techniques such as direct observation, document review and work in groups, which allowed to calculate the costs of quality in all processes. The results obtained are applicable to companies that operate in the Cuban economy and according to the Cuban economic model implemented from the year 2011.

  16. Potential of cyclotron based accelerators for energy production and transmutation

    Energy Technology Data Exchange (ETDEWEB)

    Stammbach, T.; Adam, S.; Fitze, H.R. [Paul Scherrer Institute, Villigen (Switzerland)] [and others

    1995-10-01

    PSI operates a 590 MeV-cyclotron facility for high intensity proton beams for the production of intense beams of pions and muons. The facility, commissioned in 1974, has been partially upgraded and is now operated routinely at a beam current of 1 mA, which corresponds to a beam power of 0.6 MW. At this current, the beam losses in the cyclotron are about 0.02%. By the end of 1995 the authors expect to have 1.5 mA of protons. Extensive theoretical investigations on beam current limitations in isochronous cyclotrons were undertaken. They show that the longitudinal space charge effects dominate. Based on their experience the authors present a preliminary design of a cyclotron scheme that could produce a 10 MW beam as a driver for an {open_quotes}energy amplifier{close_quotes} as proposed by C. Rubbia and his collaborators. The expected efficiency for the conversion of AC into beam power would be about 50% (for the RF-systems only). The beam losses in the cyclotron are expected to be a few {mu}A, leading to a tolerable activation level.

  17. A Comparison of Carbon Footprint and Production Cost of Different Pasta Products Based on Whole Egg and Pea Flour

    Directory of Open Access Journals (Sweden)

    Antonia Nette

    2016-03-01

    Full Text Available Feed and food production are inter alia reasons for high greenhouse gas emissions. Greenhouse gas emissions could be reduced by the replacement of animal components with plant components in processed food products, such as pasta. The main components currently used for pasta are semolina, and water, as well as additional egg. The hypothesis of this paper is that the substitution of whole egg with plant-based ingredients, for example from peas, in such a product might lead to reduced greenhouse gas emissions (GHG and thus a reduced carbon footprint at economically reasonable costs. The costs and carbon footprints of two pasta types, produced with egg or pea protein, are calculated. Plant protein–based pasta products proved to cause 0.57 kg CO2 equivalents (CO2eq (31% per kg pasta less greenhouse gas emissions than animal-based pasta, while the cost of production increases by 10% to 3.00 €/kg pasta.

  18. A Comparison of Carbon Footprint and Production Cost of Different Pasta Products Based on Whole Egg and Pea Flour

    Science.gov (United States)

    Nette, Antonia; Wolf, Patricia; Schlüter, Oliver; Meyer-Aurich, Andreas

    2016-01-01

    Feed and food production are inter alia reasons for high greenhouse gas emissions. Greenhouse gas emissions could be reduced by the replacement of animal components with plant components in processed food products, such as pasta. The main components currently used for pasta are semolina, and water, as well as additional egg. The hypothesis of this paper is that the substitution of whole egg with plant-based ingredients, for example from peas, in such a product might lead to reduced greenhouse gas emissions (GHG) and thus a reduced carbon footprint at economically reasonable costs. The costs and carbon footprints of two pasta types, produced with egg or pea protein, are calculated. Plant protein–based pasta products proved to cause 0.57 kg CO2 equivalents (CO2eq) (31%) per kg pasta less greenhouse gas emissions than animal-based pasta, while the cost of production increases by 10% to 3.00 €/kg pasta. PMID:28231112

  19. A Comparison of Carbon Footprint and Production Cost of Different Pasta Products Based on Whole Egg and Pea Flour.

    Science.gov (United States)

    Nette, Antonia; Wolf, Patricia; Schlüter, Oliver; Meyer-Aurich, Andreas

    2016-03-04

    Feed and food production are inter alia reasons for high greenhouse gas emissions. Greenhouse gas emissions could be reduced by the replacement of animal components with plant components in processed food products, such as pasta. The main components currently used for pasta are semolina, and water, as well as additional egg. The hypothesis of this paper is that the substitution of whole egg with plant-based ingredients, for example from peas, in such a product might lead to reduced greenhouse gas emissions (GHG) and thus a reduced carbon footprint at economically reasonable costs. The costs and carbon footprints of two pasta types, produced with egg or pea protein, are calculated. Plant protein-based pasta products proved to cause 0.57 kg CO₂ equivalents (CO₂eq) (31%) per kg pasta less greenhouse gas emissions than animal-based pasta, while the cost of production increases by 10% to 3.00 €/kg pasta.

  20. A CBR-Based and MAHP-Based Customer Value Prediction Model for New Product Development

    Science.gov (United States)

    Zhao, Yu-Jie; Luo, Xin-xing; Deng, Li

    2014-01-01

    In the fierce market environment, the enterprise which wants to meet customer needs and boost its market profit and share must focus on the new product development. To overcome the limitations of previous research, Chan et al. proposed a dynamic decision support system to predict the customer lifetime value (CLV) for new product development. However, to better meet the customer needs, there are still some deficiencies in their model, so this study proposes a CBR-based and MAHP-based customer value prediction model for a new product (C&M-CVPM). CBR (case based reasoning) can reduce experts' workload and evaluation time, while MAHP (multiplicative analytic hierarchy process) can use actual but average influencing factor's effectiveness in stimulation, and at same time C&M-CVPM uses dynamic customers' transition probability which is more close to reality. This study not only introduces the realization of CBR and MAHP, but also elaborates C&M-CVPM's three main modules. The application of the proposed model is illustrated and confirmed to be sensible and convincing through a stimulation experiment. PMID:25162050

  1. Active Desiccant-Based Preconditioning Market Analysis and Product Development

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, J.

    2001-01-11

    The Phase 1 report (ORNL/Sub/94-SVO44/1), completed earlier in this program, involved a comprehensive field survey and market analysis comparing various specialized outdoor air handling units. This initial investigation included conventional cooling and reheat, conventional cooling with sensible recovery, total energy recovery systems (passive desiccant technology) and various active desiccant systems. The report concluded that several markets do promise a significant sales opportunity for a Climate Changer-based active desiccant system offering. (Climate Changer is a registered trademark of Trane Company.) This initial market analysis defined the wants and needs of the end customers (design engineers and building owners), which, along with subsequent information included in this report, have been used to guide the determination of the most promising active desiccant system configurations. This Phase 2 report begins with a summary of a more thorough investigation of those specific markets identified as most promising for active desiccant systems. Table 1 estimates the annual sales potential for a cost-effective product line of active desiccant systems, such as that built from Climate Changer modules. The Product Development Strategy section describes the active desiccant system configurations chosen to best fit the needs of the marketplace while minimizing system options. Key design objectives based on market research are listed in this report for these active desiccant systems. Corresponding performance goals for the dehumidification wheel required to meet the overall system design objectives are also defined. The Performance Modeling section describes the strategy used by SEMCO to design the dehumidification wheels integrated into the prototype systems currently being tested as part of the U.S. Department of Energy's Advanced Desiccant Technology Program. Actual performance data from wheel testing was used to revise the system performance and energy analysis

  2. Sources of energy productivity change in China during 1997–2012: A decomposition analysis based on the Luenberger productivity indicator

    International Nuclear Information System (INIS)

    Wang, Ke; Wei, Yi-Ming

    2016-01-01

    Given that different energy inputs play different roles in production and that energy policy decision making requires an evaluation of productivity change in individual energy input to provide insight into the scope for improvement of the utilization of specific energy input, this study develops, based on the Luenberger productivity indicator and data envelopment analysis models, an aggregated specific energy productivity indicator combining the individual energy input productivity indicators that account for the contributions of each specific energy input toward energy productivity change. In addition, these indicators can be further decomposed into four factors: pure efficiency change, scale efficiency change, pure technology change, and scale of technology change. These decompositions enable a determination of which specific energy input is the driving force of energy productivity change and which of the four factors is the primary contributor of energy productivity change. An empirical analysis of China's energy productivity change over the period 1997–2012 indicates that (i) China's energy productivity growth may be overestimated if energy consumption structure is omitted; (ii) in regard to the contribution of specific energy input toward energy productivity growth, oil and electricity show positive contributions, but coal and natural gas show negative contributions; (iii) energy-specific productivity changes are mainly caused by technical changes rather than efficiency changes; and (iv) the Porter Hypothesis is partially supported in China that carbon emissions control regulations may lead to energy productivity growth. - Highlights: • An energy input specific Luenberger productivity indicator is proposed. • It enables to examine the contribution of specific energy input productivity change. • It can be decomposed for identifying pure and scale efficiency changes, as well as pure and scale technical changes. • China's energy productivity growth may

  3. HACCP based quality assurance systems for organic food production systems

    OpenAIRE

    Knight, C.; Stanley, R.

    2007-01-01

    HACCP provides an effective, logical and structured means of assuring food safety. Although first used in food manufacturing operations, HACCP can be – and, increasingly is – applied to food production and handling operations at all stages in the food chain. This includes the primary production sector. The purpose of this paper is to illustrate how the principles of HACCP can be applied to organic production with special reference to the primary sector.

  4. Verification of product design using regulation knowledge base and Web services

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ik June [KAERI, Daejeon (Korea, Republic of); Lee, Jae Chul; Mun Du Hwan [Kyungpook National University, Daegu (Korea, Republic of); Kim, Byung Chul [Dong-A University, Busan (Korea, Republic of); Hwang, Jin Sang [PartDB Co., Ltd., Daejeom (Korea, Republic of); Lim, Chae Ho [Korea Institute of Industrial Technology, Incheon (Korea, Republic of)

    2015-11-15

    Since product regulations contain important rules or codes that manufacturers must follow, automatic verification of product design with the regulations related to a product is necessary. For this, this study presents a new method for the verification of product design using regulation knowledge base and Web services. Regulation knowledge base consisting of product ontology and rules was built with a hybrid technique combining ontology and programming languages. Web service for design verification was developed ensuring the flexible extension of knowledge base. By virtue of two technical features, design verification is served to various products while the change of system architecture is minimized.

  5. Verification of product design using regulation knowledge base and Web services

    International Nuclear Information System (INIS)

    Kim, Ik June; Lee, Jae Chul; Mun Du Hwan; Kim, Byung Chul; Hwang, Jin Sang; Lim, Chae Ho

    2015-01-01

    Since product regulations contain important rules or codes that manufacturers must follow, automatic verification of product design with the regulations related to a product is necessary. For this, this study presents a new method for the verification of product design using regulation knowledge base and Web services. Regulation knowledge base consisting of product ontology and rules was built with a hybrid technique combining ontology and programming languages. Web service for design verification was developed ensuring the flexible extension of knowledge base. By virtue of two technical features, design verification is served to various products while the change of system architecture is minimized.

  6. Simulation-based optimization for product and process design

    NARCIS (Netherlands)

    Driessen, L.

    2006-01-01

    The design of products and processes has gradually shifted from a purely physical process towards a process that heavily relies on computer simulations (virtual prototyping). To optimize this virtual design process in terms of speed and final product quality, statistical methods and mathematical

  7. Carbon Footprint of Tree Nuts Based Consumer Products

    Directory of Open Access Journals (Sweden)

    Roberto Volpe

    2015-11-01

    Full Text Available This case study shows results of a calculation of carbon footprint (CFP resulting from the production of nuts added value products for a large consumer market. Nuts consumption is increasing in the world and so is the consumer awareness of the environmental impact of goods, hence the calculation of greenhouse gas (GHG emissions of food production is of growing importance for producers. Calculation of CO2eq emissions was performed for all stages of the production chain to the final retail point for flour, grains, paste, chocolate covered nuts and spreadable cream produced from almonds, pistachios and hazelnuts grown and transformed in Italy and for peanuts grown in Argentina and transformed in Italy. Data from literature was used to evaluate CFP of raw materials, emissions from transport and packing were calculated using existing models, while emissions deriving from transformation were calculated empirically by multiplying the power of production lines (electrical and/or thermal by its productivity. All values were reported in kg of CO2 equivalent for each kg of packed product (net weight. Resulting values ranged between 1.2 g of CO2/kg for a 100 g bag of almond to 4.8 g of CO2/kg for the 100 g bag of chocolate covered almond. The calculation procedure can be well used for similar cases of large consumer food productions.

  8. Semiconductor product analysis challenges based on the 1999 ITRS

    International Nuclear Information System (INIS)

    Joseph, Thomas W.; Anderson, Richard E.; Gilfeather, Glen; LeClaire, Carole; Yim, Daniel

    2001-01-01

    One of the most significant challenges for technology characterization and failure analysis is to keep instrumentation and techniques in step with the development of technology itself. Not only are dimensions shrinking and new materials being employed, but the rate of change is increasing. According to the 1999 International Technology Roadmap for Semiconductors, 'The number and difficulty of the technical challenges continue to increase as technology moves forward'. It could be argued that technology cannot be developed without appropriate analytical techniques; nevertheless while much effort is being directed at materials and processes, only a small proportion is being directed at analysis. Whereas previous versions of the Semiconductor Industry Association roadmap contained a small number of implicit references to characterization and analysis, the 1999 ITRS contains many explicit references. It is clear that characterization is now woven through the roadmap, and technology developers in all areas appreciate the fact that new instrumentation and techniques will be required to sustain the rate of development the semiconductor industry has seen in recent years. Late in 1999, a subcommittee of the Sematech Product Analysis Forum (PAF) reviewed the ITRS and identified a 'top-ten' list of challenges which the failure analysis community will face as present technologies are extended and future technologies are developed. This paper discusses the PAF top-ten list of challenges, which is based primarily on the Difficult Challenges tables from each ITRS working group. Eight of the top-ten are challenges of significant technical magnitude; only two could be considered non-technical in nature. Most of these challenges cut across several working group areas and could be considered common threads in the roadmap, ranging from fault simulation and modeling to imaging small features, from electrical defect isolation to deprocessing. While evolutionary changes can be anticipated

  9. CO2 balance in production of energy based on biogas

    DEFF Research Database (Denmark)

    Nielsen, Per Sieverts; Holm-Nielsen, J.B.

    1997-01-01

    Biogas is an essential biomass source for achieving a reduction of CO2 emission by 50% in year 2030 in Denmark. The physical potential for biogas production in Denmark is more than 10 times the present biogas production in Denmark. In Denmark the largest part of the biogas production is produced...... of increased transportation distances at large biogas plants on the total CO2 balance of the biogas plant. The advantage of constructing large biogas plants is the cost-effective possibility of using industrial organic waste to increase biogas production. In some cases co-fermentation increases biogas...... production up 100%. The present study evaluate optimal transportation strategies for biogas plants taking CO2 balances into account....

  10. Physical Properties for Lipids Based Process and Product Design

    DEFF Research Database (Denmark)

    Ana Perederic, Olivia; Kalakul, Sawitree; Sarup, Bent

    Lipid processing covers several oil and fats technologies such as: edible oil production, biodieselproduction, oleochemicals (e.g.: food additives, detergents) and pharmaceutical product manufacturing. New demands regarding design and development of better products and more sustainable processes...... related to lipids technology, emerge according to consumers demanding improved product manufacturing from sustainable resources and new legislation regarding environmental safety [1]. Physical and thermodynamic property data and models for prediction of pure compound properties and mixtures properties...... involving lipids represent the basic and most important requirements for process product design, simulation and optimization. Experimentally measured values of involved compounds are desirable, but in most of the cases these are not available for all the compounds and properties needed. The lack...

  11. One-carbon substrate-based biohydrogen production: microbes, mechanism, and productivity.

    Science.gov (United States)

    Rittmann, Simon K-M R; Lee, Hyun Sook; Lim, Jae Kyu; Kim, Tae Wan; Lee, Jung-Hyun; Kang, Sung Gyun

    2015-01-01

    Among four basic mechanisms for biological hydrogen (H2) production, dark fermentation has been considered to show the highest hydrogen evolution rate (HER). H2 production from one-carbon (C1) compounds such as formate and carbon monoxide (CO) is promising because formate is an efficient H2 carrier, and the utilization of CO-containing syngas or industrial waste gas may render the industrial biohydrogen production process cost-effective. A variety of microbes with the formate hydrogen lyase (FHL) system have been identified from phylogenetically diverse groups of archaea and bacteria, and numerous efforts have been undertaken to improve the HER for formate through strain optimization and bioprocess development. CO-dependent H2 production has been investigated to enhance the H2 productivity of various carboxydotrophs via an increase in CO gas-liquid mass transfer rates and the construction of genetically modified strains. Hydrogenogenic CO-conversion has been applied to syngas and by-product gas of the steel-mill process, and this low-cost feedstock has shown to be promising in the production of biomass and H2. Here, we focus on recent advances in the isolation of novel phylogenetic groups utilizing formate or CO, the remarkable genetic engineering that enhances H2 productivity, and the practical implementation of H2 production from C1 substrates. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. A PRODUCTIVITY EVALUATION MODEL BASED ON INPUT AND OUTPUT ORIENTATIONS

    Directory of Open Access Journals (Sweden)

    C.O. Anyaeche

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Many productivity models evaluate either the input or the output performances using standalone techniques. This sometimes gives divergent views of the same system’s results. The work reported in this article, which simultaneously evaluated productivity from both orientations, was applied on real life data. The results showed losses in productivity (–2% and price recovery (–8% for the outputs; the inputs showed productivity gain (145% but price recovery loss (–63%. These imply losses in product performances but a productivity gain in inputs. The loss in the price recovery of inputs indicates a problem in the pricing policy. This model is applicable in product diversification.

    AFRIKAANSE OPSOMMING: Die meeste produktiwiteitsmodelle evalueer of die inset- of die uitsetverrigting deur gebruik te maak van geïsoleerde tegnieke. Dit lei soms tot uiteenlopende perspektiewe van dieselfde sisteem se verrigting. Hierdie artikel evalueer verrigting uit beide perspektiewe en gebruik ware data. Die resultate toon ‘n afname in produktiwiteit (-2% en prysherwinning (-8% vir die uitsette. Die insette toon ‘n toename in produktiwiteit (145%, maar ‘n afname in prysherwinning (-63%. Dit impliseer ‘n afname in produkverrigting, maar ‘n produktiwiteitstoename in insette. Die afname in die prysherwinning van insette dui op ‘n problem in die prysvasstellingbeleid. Hierdie model is geskik vir produkdiversifikasie.

  13. A fast inner product processor based on equal alignments

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S.P.; Torng, H.C.

    1985-11-01

    Inner product computation is an important operation, invoked repeatedly in matrix multiplications. A high-speed inner product processor can be very useful (among many possible applications) in real-time signal processing. This paper presents the design of a fast inner product processor, with appreciably reduced latency and cost. The inner product processor is implemented with a tree of carry-propagate or carry-save adders; this structure is obtained with the incorporation of three innovations in the conventional multiply/add tree: The leaf-multipliers are expanded into adder subtrees, thus achieving an O(log Nb) latency, where N denotes the number of elements in a vector and b the number of bits in each element. The partial products, to be summed in producing an inner product, are reordered according to their ''minimum alignments.'' This reordering brings approximately a 20% savings in hardware-including adders and data paths. The reduction in adder widths also yields savings in carry propagation time for carry-propagate adders. For trees implemented with carry-save adders, the partial product reordering also serves to truncate the carry propagation chain in the final propagation stage by 2 log b - 1 positions, thus significantly reducing the latency further. A form of the Baugh and Wooley algorithm is adopted to implement two's complement notation with changes only in peripheral hardware.

  14. Thermo-Insulation Properties Of Hemp-Based Products

    Directory of Open Access Journals (Sweden)

    Lekavicius V.

    2015-02-01

    Full Text Available As known, many multi-purpose plants can be used in different industries. This research is focused on the possibilities to utilize hemp as feedstock for thermal insulation products. The most advantageous features of hemp insulation are associated with health and environmental safety. The thermal conductivity of commercially available hemp insulation products is comparable with that of other fibrous insulation materials; however, it is possible to develop new products that could be more efficient in terms of cost and due to other important features.

  15. Assessing Digital Student Productions, a Design-Based Research Study on the Development of a Criteria-Based Assessment Tool for Students’ Digital Multimodal Productions

    DEFF Research Database (Denmark)

    Hoffmeyer, Mikkeline; Jensen, Jesper Juellund; Olsen, Marie Veisegaard

    2017-01-01

    Digital multimodal production is becoming increasingly important as a 21st century skill and as a learning condition in school (K-12). Moreover, there is a growing attention to the significance of criteria-based assessment for learning. Nevertheless, assessment of students’ digital multimodal...... productions is often vague or lacking. Therefore, the research project aims at developing a tool to support assessment of student’s digital multimodal productions through a design-based research method. This paper presents a proposal for issues to be considered through a prototyping phase, based on interviews...

  16. The research for flexible product family manufacturing based on real options

    Directory of Open Access Journals (Sweden)

    Maozhu Jin

    2015-01-01

    Full Text Available Purpose: The goal of this paper is to find the best production strategy for product mix, which means the largest value of the options. And finally, give a case and find the solution of the optimal production strategy for product mix. Design/methodology/approach: This article, based on the production with characteristics of a call option and 0-1 integer programming model, build new-products mix strategy, and through case demonstrate that traditional method underestimates the value of the products mix. Finding: According to market being volatility and uncertainty and the production can being delayed, firms can flexibly arrange the best time for products to manufacture. Use real options theory to analyze product decision and the best production timing decision. Find the total options value is higher than the traditional methods. Research limitations/implications: We are not applied to real option pricing theory in modular flexible production system. We just applied real option pricing theory to the product platform. The basic model needs to improve. While the thinking of this paper provides some research ideas for flexible production systems based on real option in further research. Practical Implications: The introduction of the real option make the company can achieve dynamic planning and flexible management for production of products mix and get the better benefit. Originality/value: The central contribution of this paper is to introduce the option mechanism in the production timing for the product mix.

  17. Economic performance of community based bean seed production

    African Journals Online (AJOL)

    ACSS

    2017-05-08

    May 8, 2017 ... in rural areas and those in farmer organisations/cooperatives. However, seed production through this model is concentrated closer to urban areas, where individual seed producers are easily linked to the formal seed system.

  18. Methodology for new product development based on formalization ...

    African Journals Online (AJOL)

    Journal of Fundamental and Applied Sciences ... throughout the product life cycle using computer-aided design systems. A flow chart of the 1st stage of an engineering design by means of an automated data retrieval database is shown.

  19. Risk management in crop production based on the regional index

    Directory of Open Access Journals (Sweden)

    Kokot Željko

    2017-01-01

    Full Text Available Regional index insurance is one of the newer instruments for reducing losses in crop production. The regional index indicates the average yield or average production value in a region, representing the basis for the premium calculation and insurance benefits. The main advantage of this insurance model is that it does not require the damage assessment, which is one of major problems in the relationship between the insured and insurer. In the case of corn, wheat and sunflower production as the most important crops in the region of Ada municipality, the authors describe the methodology of application of the analysed insurance system. Implementation of this contemporary form of insurance in Serbia would reduce the negative financial consequences in agricultural production. The abovementioned model of insurance can be seen as a significant alternative to conventional insurance, which can increase insured area and number of insured, and trust and confidence in insurance companies would also be restored.

  20. Structure-based synthesis from natural products to drug prototypes

    International Nuclear Information System (INIS)

    Hanessian, S.

    2009-01-01

    X-Ray crystallographic data available from complexes of natural and synthetic molecules with the enzyme thrombin has aided to the design and synthesis of truncated and hybrid molecules exhibiting excellent inhibition in vitro. The vital importance of natural products for the well-being of man has been known lor millennia. Their therapeutic benefits to alleviate pain or cure diseases continue to rank natural products among the primary sources of potential drugs. Great advances have been made in the methods of isolation, identification, and structure elucidation of some of the most complex natural products in recent years. The advent of molecular biology and genetic mapping has also aided in our understanding of the intriguing biosynthetic pathways leading to various classes of therapeutically relevant antibiotic, anticancer, and related natural products. Elegant and practical methodology has been developed leading to the total synthesis of virtually every class of medicinally important natural product. In some cases, natural products or their chemically modified congeners have been manufactured by total synthesis on an industrial level which is a testament to the ingenuity of process chemists. In spite of their potent activities HI enzymatic ox receptor-mediated assays, not all natural products are amenable to being developed as marketable drags. In many instances unfavorable pharmacological effects cannot be overcome without drastic structural and functional modifications, which may also result in altered efficacy. Structure modification through truncation, functional group variations, isosteric replacements, and skeletal rigidifications aided by molecular modeling, X ray crystallography of protein targets, or NMR data are valid objectives in the context of small molecule drug discovery starting with bioactive natural products. A large proportion of these pertain to chemotherapeutic agents against cancer

  1. Production of lysosomal enzymes in plant-based expression systems

    OpenAIRE

    1996-01-01

    The invention relates to the production of enzymatically active recombinant human and animal lysosomal enzymes involving construction and expression of recombinant expression constructs comprising coding sequences of human or animal lysosomal enzymes in a plant expression system. The plant expression system provides for post-translational modification and processing to produce a recombinant gene product exhibiting enzymatic activity. The invention is demonstrated by working examples in which ...

  2. Diffraction based overlay and image based overlay on production flow for advanced technology node

    Science.gov (United States)

    Blancquaert, Yoann; Dezauzier, Christophe

    2013-04-01

    One of the main challenges for lithography step is the overlay control. For the advanced technology node like 28nm and 14nm, the overlay budget becomes very tight. Two overlay techniques compete in our advanced semiconductor manufacturing: the Diffraction based Overlay (DBO) with the YieldStar S200 (ASML) and the Image Based Overlay (IBO) with ARCHER (KLA). In this paper we will compare these two methods through 3 critical production layers: Poly Gate, Contact and first metal layer. We will show the overlay results of the 2 techniques, explore the accuracy and compare the total measurement uncertainty (TMU) for the standard overlay targets of both techniques. We will see also the response and impact for the Image Based Overlay and Diffraction Based Overlay techniques through a process change like an additional Hardmask TEOS layer on the front-end stack. The importance of the target design is approached; we will propose more adapted design for image based targets. Finally we will present embedded targets in the 14 FDSOI with first results.

  3. Glycaemic response of proso millet-based (Panicum miliaceum) products.

    Science.gov (United States)

    McSweeney, Matthew B; Ferenc, Agota; Smolkova, Katarina; Lazier, Alexander; Tucker, Amy; Seetharaman, Koushik; Wright, Amanda; Duizer, Lisa M; Ramdath, D Dan

    2017-11-01

    The glycaemic response of millet foods and the effect of processing are not known. Therefore, decorticated proso millet was used to produce four types of common food products (biscuits, couscous, porridge and an extruded snack). Postprandial blood glucose response of these products (all containing 50 g of total starch) was compared to the same foods produced with refined corn, in a crossover human study with 12 healthy male participants (age 26.3 ± 3.8 yr; BMI 23.3 ± 2.8 kg/m 2 ). Capillary blood samples were collected and glycaemic response was determined; differences were assessed using repeat measures ANOVA. Overall, the mean (±SEM) incremental area under the blood glucose response curve (mmol min/l) of the proso millet products was different from the corn products, but individual products (couscous = 66.7 ± 11.6, biscuit = 82.6 ± 13.7, extrudate = 198.7 ± 20.9, porridge = 40.1 ± 5.8) were not significantly lower (couscous = 43.5 ± 5.8, biscuit = 102.0 ± 10.3, extrudate = 198.7 ± 20.9, porridge = 52.2 ± 8.1) (p > .05). Glycaemic response of the products was not dependent on the grain type, but rather product matrix.

  4. Pricing and Timing Strategies for New Product Using Agent-Based Simulation of Behavioural Consumers

    OpenAIRE

    Keeheon Lee; Hoyeop Lee; Chang Ouk Kim

    2014-01-01

    In this study, we are interested in the problem of determining the pricing and timing strategies of a new product by developing an agent-based product diffusion simulation. In the proposed simulation model, agents imitate behavioural consumers, who are reference dependent and risk averse in the evaluation of new products and whose interactions create word-of-mouth regarding new products. Pricing and timing strategies involve the timing of a new product release, the timing of providing a disco...

  5. Natural product-based nanomedicine: recent advances and issues

    Science.gov (United States)

    Watkins, Rebekah; Wu, Ling; Zhang, Chenming; Davis, Richey M; Xu, Bin

    2015-01-01

    Natural products have been used in medicine for many years. Many top-selling pharmaceuticals are natural compounds or their derivatives. These plant- or microorganism-derived compounds have shown potential as therapeutic agents against cancer, microbial infection, inflammation, and other disease conditions. However, their success in clinical trials has been less impressive, partly due to the compounds’ low bioavailability. The incorporation of nanoparticles into a delivery system for natural products would be a major advance in the efforts to increase their therapeutic effects. Recently, advances have been made showing that nanoparticles can significantly increase the bioavailability of natural products both in vitro and in vivo. Nanotechnology has demonstrated its capability to manipulate particles in order to target specific areas of the body and control the release of drugs. Although there are many benefits to applying nanotechnology for better delivery of natural products, it is not without issues. Drug targeting remains a challenge and potential nanoparticle toxicity needs to be further investigated, especially if these systems are to be used to treat chronic human diseases. This review aims to summarize recent progress in several key areas relevant to natural products in nanoparticle delivery systems for biomedical applications. PMID:26451111

  6. An Agent-Based Monetary Production Simulation Model

    DEFF Research Database (Denmark)

    Bruun, Charlotte

    2006-01-01

    An Agent-Based Simulation Model Programmed in Objective Borland Pascal. Program and source code is downloadable......An Agent-Based Simulation Model Programmed in Objective Borland Pascal. Program and source code is downloadable...

  7. Synthetic yeast based cell factories for vanillin-glucoside production

    DEFF Research Database (Denmark)

    Strucko, Tomas

    and controlled expression/overexpression of genes of interest. De novo biosynthetic pathway for vanillin-β-glucoside production was employed as a model system for several case studies in this project. In order to construct yeast cell factories fulfilling current demands of industrial biotechnology, methods......The yeast Saccharomyces cerevisiae is well a characterized microorganism and widely used as eukaryotic model organism as well as a key cell factory for bioproduction of various products. The latter comprise a large variety of scientifically and industrially relevant products such as low-value bulk...... chemicals and biofuels, food additives, high-value chemicals and recombinant proteins. Despite the recent achievements in the fields of systems biology and metabolic engineering together with availability of broad genetic engineering toolbox, the full potential of S. cerevisiae as a cell factory is not yet...

  8. Natural product-based nanomedicine: recent advances and issues

    Directory of Open Access Journals (Sweden)

    Watkins R

    2015-09-01

    Full Text Available Rebekah Watkins,1,2,* Ling Wu,1,* Chenming Zhang,3–5 Richey M Davis,3,5,6 Bin Xu1,3 1Department of Biochemistry, 2Program in Nanoscience, 3Center for Drug Discovery, 4Department of Biological Systems Engineering, 5Institute for Critical Technology and Applied Science, 6Department of Chemical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA *These authors contributed equally to this work Abstract: Natural products have been used in medicine for many years. Many top-selling pharmaceuticals are natural compounds or their derivatives. These plant- or microorganism-derived compounds have shown potential as therapeutic agents against cancer, microbial infection, inflammation, and other disease conditions. However, their success in clinical trials has been less impressive, partly due to the compounds’ low bioavailability. The incorporation of nanoparticles into a delivery system for natural products would be a major advance in the efforts to increase their therapeutic effects. Recently, advances have been made showing that nanoparticles can significantly increase the bioavailability of natural products both in vitro and in vivo. Nanotechnology has demonstrated its capability to manipulate particles in order to target specific areas of the body and control the release of drugs. Although there are many benefits to applying nanotechnology for better delivery of natural products, it is not without issues. Drug targeting remains a challenge and potential nanoparticle toxicity needs to be further investigated, especially if these systems are to be used to treat chronic human diseases. This review aims to summarize recent progress in several key areas relevant to natural products in nanoparticle delivery systems for biomedical applications. Keywords: natural products, nanomedicine, drug delivery, bioavailability, targeting, controlled release

  9. Improving product development practice: An action-research based approach

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    In studies of new product development it has often been concluded that to a large extent new product suc-cess is tunder the influence of companies and long lists of direct norma-tive guide-lines have been formulated. Nevertheless descriptive studi that deve-lopment practice is still far from...... studies both purely descriptive and studies identifying success and failure factors, but almost no studies of how companies actually undertake improve-ments, which problems they encounter,, and how/whether they overcome these problems. Action research is proposed as a suitable method for studying...

  10. Improving product development practice: An action-research based approach

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    In studies of new product development it has often been concluded that to a large extent new product suc-cess is tunder the influence of companies and long lists of direct norma-tive guide-lines have been formulated. Nevertheless descriptive studi that deve-lopment practice is still far from...... the widely published normative advice. While there may be several reasons for discrepancies between research results and prac-tice this paper focuses on problems of implementation of the identified success factors. Within the research area of NPD-management there has been numerous surveys as well as case...

  11. Ensemble based multi-objective production optimization of smart wells

    NARCIS (Netherlands)

    Fonseca, R.M.; Leeuwenburgh, O.; Jansen, J.D.

    2012-01-01

    In a recent study two hierarchical multi-objective methods were suggested to include short-term targets in life-cycle production optimization. However this previous study has two limitations: 1) the adjoint formulation is used to obtain gradient information, requiring simulator source code access

  12. Industrial enzymatic production of cephalosporin-based beta-lactams.

    Science.gov (United States)

    Barber, Michael S; Giesecke, Ulrich; Reichert, Arno; Minas, Wolfgang

    2004-01-01

    Cephalosporins are chemically closely related to penicillins both work by inhibiting the cell wall synthesis of bacteria. The first generation cephalosporins entered the market in 1964. Second and third generation cephalosporins were subsequently developed that were more powerful than the original products. Fourth generation cephalosporins are now reaching the market. Each newer generation of cephalosporins has greater Gram-negative antimicrobial properties than the preceding generation. Conversely, the 'older' generations of cephalosporins have greater Gram-positive (Staphylococcus and Streptococcus) coverage than the 'newer' generations. Frequency of dosing decreases and palatability generally improve with increasing generations. The advent of fourth generation cephalosporins with the launch of cefepime extended the spectrum against Gram-positive organisms without a significant loss of activity towards Gram-negative bacteria. Its greater stability to beta-lactamases increases its efficacy against drug-resistant bacteria. In this review we present the current situation of this mature market. In addition, we present the current state of the technologies employed for the production of cephalosporins, focusing on the new and environmentally safer 'green' routes to the products. Starting with the fermentation and purification of CPC, enzymatic conversion in conjunction with aqueous chemistry will lead to some key intermediates such as 7-ACA, TDA and TTA, which then can be converted into the active pharmaceutical ingredient (API), again applying biocatalytic technologies and aqueous chemistry. Examples for the costing of selected products are provided as well.

  13. Superstructure-based optimization of biorefinery networks: Production of biodiesel

    DEFF Research Database (Denmark)

    Bertran, Maria-Ona; Orsi, Albert; Gani, Rafiqul

    2015-01-01

    through a practical case study for the production biodiesel from a variety of feedstock. The different biorefinery processing alternatives are represented in a superstructure and the associated data is collected and stored in a database. Once a specific biorefinery synthesis problem is formulated...

  14. Root system-based limits to agricultural productivity and efficiency

    DEFF Research Database (Denmark)

    Thorup-Kristensen, Kristian; Kirkegaard, John

    2016-01-01

    of water and nitrogen from deeper soil layers has been proposed to improve productivity and environmental outcomes in both systems. The analysis showed that water and nitrogen availability, especially in deeper layers (>1 m), was significantly affected by the preceding crops and management, and likely...

  15. Assessing the Economic Viability of Bio-based Products for Missouri Value-added Crop Production

    Energy Technology Data Exchange (ETDEWEB)

    Nicholas Kalaitzandonakes

    2005-11-30

    While research and development on biobased products has continued strong over the years, parallel attention on the economics and management of such product innovation has been lacking. With the financial support of the Department of Energy, the Economics and Management of Agrobiotechnology Center at the University of Missouri-Columbia has launched a pilot graduate education program that seeks to fill the gap. Within this context, a multi-disciplinary research and teaching program has been structured with an emphasis on new product and innovation economics and management. More specifically, this pilot graduate education program has the following major objectives: (1) To provide students with a strong background in innovation economics, management, and strategy. (2) To diversify the students academic background with coursework in science and technology. (3) To familiarize the student with biobased policy initiatives through interaction with state and national level organizations and policymakers. (4) To facilitate active collaboration with industry involved in the development and production of biobased products. The pilot education program seeks to develop human capital and research output. Although the research is, initially, focused on issues related to the State of Missouri, the results are expected to have national implications for the economy, producers, consumers and environment.

  16. Reductions in employee productivity impairment observed after implementation of web-based worksite health promotion programs.

    Science.gov (United States)

    Silberman, Jordan; Schwartz, Steven; Giuseffi, Danielle L; Wang, Chun; Nevedal, Dana; Bedrosian, Richard

    2011-12-01

    To assess changes in employee productivity impairment observed after the implementation of several Web-based health promotion programs. Health risk assessments and self-report measures of productivity impairment were administered on-line to more than 43,000 participants of Web-based health promotion programs. Reductions in productivity impairment were observed after 1 month of program utilization. Productivity impairment at 90- and 180-day follow-ups also decreased relative to baseline. Improvements in employee health were associated with reductions in employee productivity impairment. The use of Web-based health promotion programs was associated with reductions in productivity impairment and improvements in employee health. After the implementation of Web-based health promotion programs, reductions in productivity impairment may be observed before reductions in direct health care costs.

  17. Resource recovery from bio-based production processes: a future necessity?

    DEFF Research Database (Denmark)

    Mansouri, Seyed Soheil; S.B.A. Udugama, Isuru; Cignitti, Stefano

    2017-01-01

    The promise of transforming waste streams with small economic value into valuable products makes resource recovery technologies in bio-based production processes an attractive proposition. However, the use of resource recovery technologies in industrial applications is still minimal, despite its...... technologies to industrial bio-based production processes. The role and importance of economics, technology readiness and socio-environmental impacts of resource recovery in successfully implementing resource recovery technologies in industrial bio-based production processes is also discussed. Finally, based...... wide use in closely related processes such as dairy production. In this paper, a perspective on the role of resource recovery in bio-based production processes is provided through reviewing the past practice and identifying the benefits, opportunities and challenges of introducing resource recovery...

  18. Microbial nitrogen cycling response to forest-based bioenergy production.

    Science.gov (United States)

    Minick, Kevan J; Strahm, Brian D; Fox, Thomas R; Sucre, Eric B; Leggett, Zakiya H

    2015-12-01

    Concern over rising atmospheric CO2 and other greenhouse gases due to fossil fuel combustion has intensified research into carbon-neutral energy production. Approximately 15.8 million ha of pine plantations exist across the southeastern United States, representing a vast land area advantageous for bioenergy production without significant landuse change or diversion of agricultural resources from food production. Furthermore, intercropping of pine with bioenergy grasses could provide annually harvestable, lignocellulosic biomass feedstocks along with production of traditional wood products. Viability of such a system hinges in part on soil nitrogen (N) availability and effects of N competition between pines and grasses on ecosystem productivity. We investigated effects of intercropping loblolly pine (Pinus taeda) with switchgrass (Panicum virgatum) on microbial N cycling processes in the Lower Coastal Plain of North Carolina, USA. Soil samples were collected from bedded rows of pine and interbed space of two treatments, composed of either volunteer native woody and herbaceous vegetation (pine-native) or pure switchgrass (pine-switchgrass) in interbeds. An in vitro 15N pool-dilution technique was employed to quantify gross N transformations at two soil depths (0-5 and 5-15 cm) on four dates in 2012-2013. At the 0-5 cm depth in beds of the pine-switchgrass treatment, gross N mineralization was two to three times higher in November and February compared to the pine-native treatment, resulting in increased NH4(+) availability. Gross and net nitrification were also significantly higher in February in the same pine beds. In interbeds of the pine-switchgrass treatment, gross N mineralization was lower from April to November, but higher in February, potentially reflecting positive effects of switchgrass root-derived C inputs during dormancy on microbial activity. These findings indicate soil N cycling and availability has increased in pine beds of the pine

  19. Roll-to-Roll production of carbon nanotubes based supercapacitors

    Science.gov (United States)

    Zhu, Jingyi; Childress, Anthony; Karakaya, Mehmet; Roberts, Mark; Arcilla-Velez, Margarita; Podila, Ramakrishna; Rao, Apparao

    2014-03-01

    Carbon nanomaterials provide an excellent platform for electrochemical double layer capacitors (EDLCs). However, current industrial methods for producing carbon nanotubes are expensive and thereby increase the costs of energy storage to more than 10 Wh/kg. In this regard, we developed a facile roll-to-roll production technology for scalable manufacturing of multi-walled carbon nanotubes (MWNTs) with variable density on run-of-the-mill kitchen Al foils. Our method produces MWNTs with diameter (heights) between 50-100 nm (10-100 μm), and a specific capacitance as high as ~ 100 F/g in non-aqueous electrolytes. In this talk, the fundamental challenges involved in EDLC-suitable MWNT growth, roll-to-roll production, and device manufacturing will be discussed along with electrochemical characteristics of roll-to-roll MWNTs. Research supported by NSF CMMI Grant1246800.

  20. Topographical Hill Shading Map Production Based Tianditu (map World)

    Science.gov (United States)

    Wang, C.; Zha, Z.; Tang, D.; Yang, J.

    2018-04-01

    TIANDITU (Map World) is the public version of National Platform for Common Geospatial Information Service, and the terrain service is an important channel for users on the platform. With the development of TIANDITU, topographical hill shading map production for providing and updating global terrain map on line becomes necessary for the characters of strong intuition, three-dimensional sense and aesthetic effect. As such, the terrain service of TIANDITU focuses on displaying the different scales of topographical data globally. And this paper mainly aims to research the method of topographical hill shading map production globally using DEM (Digital Elevation Model) data between the displaying scales about 1 : 140,000,000 to 1 : 4,000,000, corresponded the display level from 2 to 7 on TIANDITU website.

  1. Using Smart Packaging in Fish and Fish Based Product

    Directory of Open Access Journals (Sweden)

    Elif Tuğçe AKSUN

    2016-11-01

    Full Text Available Food packaging have three main roles during protection, preservation and storage are still involved better continuance of food quality. Evolution of civilization and improvement of new kind of food stuffs, packaging industry must created new possibilities for preventation of food quality during shelf-life. The quality and safety of perishable food is related to microbial quality has got a significance role. Fish is a very perishable food product. It is a very low acidic food and thus is very liable to the expansion of food poisoning bacteria. Also decomposition of fish can be by reason of enzymatic spoilage, oxidation and/or bacterial spoilage. Fish is an important resource of polyunsaturated fatty acids stated to have defensive effects in opposition to heartconnected diseases. Some smart packaging mechanisms liable to determine this break down incident thought storage. In this review, smart packaging technologies that could be used to detect breakdown compounds from packed fish and fish products.

  2. Quantitative Estimation of Risks for Production Unit Based on OSHMS and Process Resilience

    Science.gov (United States)

    Nyambayar, D.; Koshijima, I.; Eguchi, H.

    2017-06-01

    Three principal elements in the production field of chemical/petrochemical industry are (i) Production Units, (ii) Production Plant Personnel and (iii) Production Support System (computer system introduced for improving productivity). Each principal element has production process resilience, i.e. a capability to restrain disruptive signals occurred in and out of the production field. In each principal element, risk assessment is indispensable for the production field. In a production facility, the occupational safety and health management system (Hereafter, referred to as OSHMS) has been introduced to reduce a risk of accidents and troubles that may occur during production. In OSHMS, a risk assessment is specified to reduce a potential risk in the production facility such as a factory, and PDCA activities are required for a continual improvement of safety production environments. However, there is no clear statement to adopt the OSHMS standard into the production field. This study introduces a metric to estimate the resilience of the production field by using the resilience generated by the production plant personnel and the result of the risk assessment in the production field. A method for evaluating how OSHMS functions are systematically installed in the production field is also discussed based on the resilience of the three principal elements.

  3. Predicting animal production on sourveld: a species-based approach

    African Journals Online (AJOL)

    The model was based upon measured ingestive and digestive characteristics of different grass species and incorporates an explicit digestive constraint based upon rumen mass and turnover rate. Illustrates with graphs, diagrams and tables. Keywords: ADG; Andropogon appendiculatus; Average daily gain; Cattle; Cynodon ...

  4. Utilizing thermophilic microbe in lignocelluloses based bioethanol production: Review

    Science.gov (United States)

    Sriharti, Agustina, Wawan; Ratnawati, Lia; Rahman, Taufik; Salim, Takiyah

    2017-01-01

    The utilization of thermophilic microbe has attracted many parties, particularly in producing an alternative fuel like ethanol. Bioethanol is one of the alternative energy sources substituting for earth oil in the future. The advantage of using bioethanol is that it can reduce pollution levels and global warming because the result of bioethanol burning doesn't bring in a net addition of CO2 into environment. Moreover, decrease in the reserves of earth oil globally has also contributed to the notion on searching renewable energy resources such as bioethanol. Indonesia has a high biomass potential and can be used as raw material for bioethanol. The utilization of these raw materials will reduce fears of competition foodstuffs for energy production. The enzymes that play a role in degrading lignocelluloses are cellulolytic, hemicellulolytic, and lignolytic in nature. The main enzyme with an important role in bioethanol production is a complex enzyme capable of degrading lignocelluloses. The enzyme can be produced by the thermophilik microbes of the groups of bacteria and fungi such as Trichoderma viride, Clostridium thermocellum, Bacillus sp. Bioethanol production is heavily affected by raw material composition, microorganism type, and the condition of fermentation used.

  5. BUILDING MATERIALS AND PRODUCTS BASED ON SILICON MANGANESE SLAGS

    Directory of Open Access Journals (Sweden)

    BOLSHAKOV V. I.

    2016-05-01

    Full Text Available Raising of problem. Currently of particular relevance was given to the matter of introduction in manufacture of building materials and products, resource-saving techniques and technologies; integrated use of raw materials and materials that prevent or significantly reduce their harmful impact on the environment. This allows you to recycle hundreds of thousands of tons of the fiery liquid slags of silicon manganese and to develop effective structural materials that can replace metals, non-metallic building materials of natural origin, concretes, cast stone, plastics and refractories. Purpose. The study of the structure and properties of building materials and products from electric furnace slag of silicon manganese. Conclusion. Slags from the smelting of silicon manganese are classified as acidic. Their lime factor is in the range of 0.47–0.52. The composition of the slag located in the heterogeneous region SiO2 near the line of separation of cristobalite spread to the crystallization of wollastonite, according to the ternary system MnO-CaO-SiO2, which in consideration of their stability, allows the development of technology of building materials (gravel, sand, granulated slag, etc. and products (foundation blocks, road slabs, containers for transportation and storage of hazardous waste, and others.

  6. Comparison of bee products based on assays of antioxidant capacities

    Directory of Open Access Journals (Sweden)

    Mishima Satoshi

    2009-02-01

    Full Text Available Abstract Background Bee products (including propolis, royal jelly, and bee pollen are popular, traditional health foods. We compared antioxidant effects among water and ethanol extracts of Brazilian green propolis (WEP or EEP, its main constituents, water-soluble royal jelly (RJ, and an ethanol extract of bee pollen. Methods The hydrogen peroxide (H2O2-, superoxide anion (O2·--, and hydroxyl radical (HO·- scavenging capacities of bee products were measured using antioxidant capacity assays that employed the reactive oxygen species (ROS-sensitive probe 5-(and-6-chloromethyl-2',7'-dichlorodihydrofluorescein diacetate, acetyl ester (CM-H2DCFDA or aminophenyl fluorescein (APF. Results The rank order of antioxidant potencies was as follows: WEP > EEP > pollen, but neither RJ nor 10-hydroxy-2-decenoic acid (10-HDA had any effects. Concerning the main constituents of WEP, the rank order of antioxidant effects was: caffeic acid > artepillin C > drupanin, but neither baccharin nor coumaric acid had any effects. The scavenging effects of caffeic acid were as powerful as those of trolox, but stronger than those of N-acetyl cysteine (NAC or vitamin C. Conclusion On the basis of the present assays, propolis is the most powerful antioxidant of all the bee product examined, and its effect may be partly due to the various caffeic acids it contains. Pollen, too, exhibited strong antioxidant effects.

  7. Comparison of bee products based on assays of antioxidant capacities.

    Science.gov (United States)

    Nakajima, Yoshimi; Tsuruma, Kazuhiro; Shimazawa, Masamitsu; Mishima, Satoshi; Hara, Hideaki

    2009-02-26

    Bee products (including propolis, royal jelly, and bee pollen) are popular, traditional health foods. We compared antioxidant effects among water and ethanol extracts of Brazilian green propolis (WEP or EEP), its main constituents, water-soluble royal jelly (RJ), and an ethanol extract of bee pollen. The hydrogen peroxide (H2O2)-, superoxide anion (O2.-)-, and hydroxyl radical (HO.)- scavenging capacities of bee products were measured using antioxidant capacity assays that employed the reactive oxygen species (ROS)-sensitive probe 5-(and-6)-chloromethyl-2',7'-dichlorodihydrofluorescein diacetate, acetyl ester (CM-H2DCFDA) or aminophenyl fluorescein (APF). The rank order of antioxidant potencies was as follows: WEP > EEP > pollen, but neither RJ nor 10-hydroxy-2-decenoic acid (10-HDA) had any effects. Concerning the main constituents of WEP, the rank order of antioxidant effects was: caffeic acid > artepillin C > drupanin, but neither baccharin nor coumaric acid had any effects. The scavenging effects of caffeic acid were as powerful as those of trolox, but stronger than those of N-acetyl cysteine (NAC) or vitamin C. On the basis of the present assays, propolis is the most powerful antioxidant of all the bee product examined, and its effect may be partly due to the various caffeic acids it contains. Pollen, too, exhibited strong antioxidant effects.

  8. Energy-Based Evaluations on Eucalyptus Biomass Production

    Directory of Open Access Journals (Sweden)

    Thiago L. Romanelli

    2012-01-01

    Full Text Available Dependence on finite resources brings economic, social, and environmental concerns. Planted forests are a biomass alternative to the exploitation of natural forests. In the exploitation of the planted forests, planning and management are key to achieve success, so in forestry operations, both economic and noneconomic factors must be considered. This study aimed to compare eucalyptus biomass production through energy embodiment of anthropogenic inputs and resource embodiment including environmental contribution (emergy for the commercial forest in the Sao Paulo, Brazil. Energy analyses and emergy synthesis were accomplished for the eucalyptus production cycles. It was determined that emergy synthesis of eucalyptus production and sensibility analysis for three scenarios to adjust soil acidity (lime, ash, and sludge. For both, energy analysis and emergy synthesis, harvesting presented the highest input demand. Results show the differences between energy analysis and emergy synthesis are in the conceptual underpinnings and accounting procedures. Both evaluations present similar trends and differ in the magnitude of the participation of an input due to its origin. For instance, inputs extracted from ores, which represent environmental contribution, are more relevant for emergy synthesis. On the other hand, inputs from industrial processes are more important for energy analysis.

  9. A Wavelet-Based Optimization Method for Biofuel Production

    Directory of Open Access Journals (Sweden)

    Maurizio Carlini

    2018-02-01

    Full Text Available On a global scale many countries are still heavily dependent on crude oil to produce energy and fuel for transport, with a resulting increase of atmospheric pollution. A possible solution to obviate this problem is to find eco-sustainable energy sources. A potential choice could be the use of biodiesel as fuel. The work presented aims to characterise the transesterification reaction of waste peanut frying oil using colour analysis and wavelet analysis. The biodiesel production, with the complete absence of mucilages, was evaluated through a suitable set of energy wavelet coefficients and scalograms. The physical characteristics of the biodiesel are influenced by mucilages. In particular the viscosity, that is a fundamental parameter for the correct use of the biodiesel, might be compromised. The presence of contaminants in the samples can often be missed by visual analysis. The low and high frequency wavelet analysis, by investigating the energy change of wavelet coefficient, provided a valid characterisation of the quality of the samples, related to the absence of mucilages, which is consistent with the experimental results. The proposed method of this work represents a preliminary analysis, before the subsequent chemical physical analysis, that can be develop during the production phases of the biodiesel in order to optimise the process, avoiding the presence of impurities in suspension in the final product.

  10. Manufacturing lines under surplus-based control : multiple products and bounded buffers

    NARCIS (Netherlands)

    Starkov, K.; Pogromskiy, A.Y.; Adan, I.J.B.F.

    2015-01-01

    Challenged by the scheduling complexity for production flow processes in industrial facilities, we study the performance of multi-product producing lines. We analyse the performance of multi-product lines that consist a number of machines and bounded buffers with preselected base stock levels. It is

  11. Targeting and timing promotional activities : An agent-based model for the takeoff of new products

    NARCIS (Netherlands)

    Delre, S. A.; Jager, W.; Bijmolt, T. H. A.; Janssen, M. A.

    Many marketing efforts focus on promotional activities that support the launch of new products. Promotional strategies may play a crucial role in the early stages of the product life cycle, and determine to a large extent the diffusion of a new product. This paper proposes an agent-based model to

  12. Satellite-based Flood Modeling Using TRMM-based Rainfall Products

    Directory of Open Access Journals (Sweden)

    Greg Easson

    2007-12-01

    Full Text Available Increasingly available and a virtually uninterrupted supply of satellite-estimatedrainfall data is gradually becoming a cost-effective source of input for flood predictionunder a variety of circumstances. However, most real-time and quasi-global satelliterainfall products are currently available at spatial scales ranging from 0.25o to 0.50o andhence, are considered somewhat coarse for dynamic hydrologic modeling of basin-scaleflood events. This study assesses the question: what are the hydrologic implications ofuncertainty of satellite rainfall data at the coarse scale? We investigated this question onthe 970 km2 Upper Cumberland river basin of Kentucky. The satellite rainfall productassessed was NASA’s Tropical Rainfall Measuring Mission (TRMM Multi-satellitePrecipitation Analysis (TMPA product called 3B41RT that is available in pseudo real timewith a latency of 6-10 hours. We observed that bias adjustment of satellite rainfall data canimprove application in flood prediction to some extent with the trade-off of more falsealarms in peak flow. However, a more rational and regime-based adjustment procedureneeds to be identified before the use of satellite data can be institutionalized among floodmodelers.

  13. Cell-based product classification procedure: What can be done differently to improve decisions on borderline products?

    Science.gov (United States)

    Izeta, Ander; Herrera, Concha; Mata, Rosario; Astori, Giuseppe; Giordano, Rosaria; Hernández, Carmen; Leyva, Laura; Arias, Salvador; Oyonarte, Salvador; Carmona, Gloria; Cuende, Natividad

    2016-07-01

    In June 2015, European Medicines Agency/Committee for Advanced Therapies (CAT) released the new version of the reflection paper on classification of advanced therapy medicinal products (ATMPs) established to address questions of borderline cases in which classification of a product based on genes, cells or tissues is unclear. The paper shows CAT's understanding of substantial manipulation and essential function(s) criteria that define the legal scope of cell-based medicinal products. This article aims to define the authors' viewpoint on the reflection paper. ATMP classification has intrinsic weaknesses derived from the lack of clarity of the evolving concepts of substantial manipulation and essential function(s) as stated in the EU Regulation, leading to the risk of differing interpretations and misclassification. This might result in the broadening of ATMP scope at the expense of other products such as cell/tissue transplants and blood products, or even putting some present and future clinical practice at risk of being classified as ATMP. Because of the major organizational, economic and regulatory implications of product classification, we advocate for increased interaction between CAT and competent authorities (CAs) for medicines, blood and blood components and tissues and cells or for the creation of working groups including representatives of all parties as recently suggested by several CAs. Copyright © 2016 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

  14. New frontiers in information and production systems modelling and analysis incentive mechanisms, competence management, knowledge-based production

    CERN Document Server

    Novikov, Dmitry; Bakhtadze, Natalia; Zaikin, Oleg

    2016-01-01

    This book demonstrates how to apply modern approaches to complex system control in practical applications involving knowledge-based systems. The dimensions of knowledge-based systems are extended by incorporating new perspectives from control theory, multimodal systems and simulation methods.  The book is divided into three parts: theory, production system and information system applications. One of its main focuses is on an agent-based approach to complex system analysis. Moreover, specialised forms of knowledge-based systems (like e-learning, social network, and production systems) are introduced with a new formal approach to knowledge system modelling.   The book, which offers a valuable resource for researchers engaged in complex system analysis, is the result of a unique cooperation between scientists from applied computer science (mainly from Poland) and leading system control theory researchers from the Russian Academy of Sciences’ Trapeznikov Institute of Control Sciences.

  15. Fish product quality evaluation based on temperature monitoring in ...

    African Journals Online (AJOL)

    Yomi

    2010-09-13

    Sep 13, 2010 ... sensory analysis and total volatile base-nitrogen (TVB-N) value. The result ... multiple businesses by starting/stopping the measure- ment and ... Comparing with three group samples, temperature history and the fluctuation ...

  16. Production and properties of light-metal base amorphous alloys

    International Nuclear Information System (INIS)

    Inoue, Akihisa; Masumoto, Tsuyoshi

    1993-01-01

    Light-metal base alloys with high specific strength and good corrosion resistance were produced through amorphization of Al and Mg-based alloys. The amorphous phase is formed in rapidly solidified Al-TM-Ln and Mg-TM-Ln (TM=transition metal, Ln=lanthanide metal) alloys. The highest tensile strength (σ f ) reaches 1,330 MPa for the Al base and 830 MPa for the Mg base. Furthermore, the Mg-based alloys have a large glass-forming capacity which enables to produce an amorphous phase by a metallic mold casting method. The extrusion of the Al-based amorphous powders at temperatures above crystallization temperature caused the formation of high strength materials with finely mixed structure consisting of dispersed intermetallic compounds in an Al matrix. The highest values of σ f and fatigue limit are as high as 940 and 313 MPa, respectively, at room temperature and 520 and 165 MPa at 473 K. The extruded Al-Ni-Mm alloy has already been used as machine parts and subsequent further development as practical materials is expected by taking these advantages

  17. High availability based on production information systems research and practice

    International Nuclear Information System (INIS)

    Lu Weiping

    2010-01-01

    Through the presentation of the production information system application deployment in Qinshan Nuclear Power Co., Ltd., combined with CEAS failure to deal with, respectively, in the server (operating system), database and application software on-going monitoring and tuning of the actual cases are discussed: For the system to maintain a high availability, performance and security, not only on the server (operating system) for rational allocation and deployment, but also the need for database and application software to optimize the well-designed and sustained. (authors)

  18. [Interpretation of the concept of 'medicinal product' in relation to herb- and cannabinoid-based products].

    Science.gov (United States)

    Zsigmond, Ferge

    2014-11-30

    On 10th of July 2014 the European Court of Justice made in his decisions in relation to the cases D. (C-358/13) and G. (C-181/14) an interpretation, that the concept of 'medicinal product' according to the law of the European Union does not include the materials, which are - as not covering substances, such as those at issue in the main proceedings, which produce effects that merely modify physiological functions but which are not such as to have any beneficial effects, either immediately or in the long term, on human health, are consumed solely to induce a state of intoxication and are, as such, harmful to human health. The Court made his interpretation after the request for preliminary ruling from the Bundesgerichtshof (the High Court of Justice in Germany). The Court had to decide in two criminal procedures, whether for the retail of mixtures including syntetic canabinoids, such as complements of marihuana, due the fact that they are "unsafe medicinal products", a criminal proceeding can be initiated or not. The Ordinary Courts had two persons (D. and G.) for selling the unsafe medicinal products sentenced to one year and nine months imprisonment, and suspension (D.), and sentenced (G.) to four years and six months imprisonment and fined with a charge of two hundred thousand Euro. The retail of herb mixtures containing, inter alia, synthetic cannabinoids, did not fall under the German law on narcotic drugs at the material time, resulting that the German Authorities could not initiate a criminal procedure.

  19. Bio-based composites from stone groundwood applied to new product development

    OpenAIRE

    Julián Pérez, Fernando; Méndez González, José Alberto; Espinach Orús, Xavier; Verdaguer Pujadas, Narcís; Mutjé Pujol, Pere; Vilaseca Morera, Fabiola

    2012-01-01

    This paper deals with the product design, engineering, and material selection intended for the manufacturing of an eco-friendly chair. The final product is expected to combine design attributes with technical and legal feasibility with the implementation of new bio-based materials. Considering the industrial design, a range of objectives and trends were determined after setting the market requirements, and the final concept was proposed and modeled. The product geometry, production technology...

  20. Frames and bases in tensor products of Hilbert spaces and Hilbert C ...

    Indian Academy of Sciences (India)

    In this article, we study tensor product of Hilbert *-modules and Hilbert spaces. We show that if is a Hilbert -module and is a Hilbert -module, then tensor product of frames (orthonormal bases) for and produce frames (orthonormal bases) for Hilbert A ⊗ B -module E ⊗ F , and we get more results. For Hilbert ...

  1. Understanding the Role of Neuroscience in Brain Based Products: A Guide for Educators and Consumers

    Science.gov (United States)

    Sylvan, Lesley J.; Christodoulou, Joanna A.

    2010-01-01

    The term "brain" based is often used to describe learning theories, principles, and products. Although there have been calls urging educators to be cautious in interpreting and using such material, consumers may find it challenging to understand the role of the brain and to discriminate among brain based products to determine which would be…

  2. Understanding competencies in platform-based product development: Antecedents and outcomes

    NARCIS (Netherlands)

    Chai, K.H.; Wang, Q; Song, Michael; Halman, Johannes I.M.; Brombacher, A.C.; Brombacher, A.C.

    2012-01-01

    While previous studies have shed light on the benefits and antecedents of platform-based product development, there is still much to be learned on the subject, particularly through an empirical approach. Based on the literature, this study proposes the concept of product platform competency and

  3. Understanding competencies in platform-based product development : antecedents and outcomes

    NARCIS (Netherlands)

    Chai, K.H.; Wang, Q.; Song, M.; Halman, J.I.M.; Brombacher, A.C.

    2012-01-01

    While previous studies have shed light on the benefits and antecedents of platform-based product development, there is still much to be learned on the subject, particularly through an empirical approach. Based on the literature, this study proposes the concept of product platform competency and

  4. Advanced biomass science and technology for bio-based products: proceedings

    Science.gov (United States)

    Chung Hse; Zehui Jiang; Mon-Lin Kuo

    2009-01-01

    This book was developed from the proceedings of the Advanced Biomass Science and Technology for Bio-Based Products Symposium held in Beijing, China, May 23-25, 2007. The symposium was designed to provide a forum for researchers, producers, and consumers of biomass and bio-based products; to exchange information and ideas; and to stimulate new research and...

  5. Adaptive designs based on the truncated product method

    Directory of Open Access Journals (Sweden)

    Neuhäuser Markus

    2005-09-01

    Full Text Available Abstract Background Adaptive designs are becoming increasingly important in clinical research. One approach subdivides the study into several (two or more stages and combines the p-values of the different stages using Fisher's combination test. Methods Alternatively to Fisher's test, the recently proposed truncated product method (TPM can be applied to combine the p-values. The TPM uses the product of only those p-values that do not exceed some fixed cut-off value. Here, these two competing analyses are compared. Results When an early termination due to insufficient effects is not appropriate, such as in dose-response analyses, the probability to stop the trial early with the rejection of the null hypothesis is increased when the TPM is applied. Therefore, the expected total sample size is decreased. This decrease in the sample size is not connected with a loss in power. The TPM turns out to be less advantageous, when an early termination of the study due to insufficient effects is possible. This is due to a decrease of the probability to stop the trial early. Conclusion It is recommended to apply the TPM rather than Fisher's combination test whenever an early termination due to insufficient effects is not suitable within the adaptive design.

  6. Bio-based C-3 Platform Chemical: Biotechnological Production and -Conversion of 3-Hydroxypropionaldehyde

    OpenAIRE

    Rezaei, Roya

    2013-01-01

    Demands for efficient, greener, economical and sustainable production of chemicals, materials and energy have led to development of industrial biotechnology as a key technology area to provide such products from bio-based raw materials from agricultural-, forestry- and related industrial residues and by-products. For the bio-based industry, it is essential to develop a number of building blocks or platform chemicals for C2-C6 chemicals and even aromatic chemicals. 3-hydroxypropionaldehyde (3H...

  7. Form gene clustering method about pan-ethnic-group products based on emotional semantic

    Science.gov (United States)

    Chen, Dengkai; Ding, Jingjing; Gao, Minzhuo; Ma, Danping; Liu, Donghui

    2016-09-01

    The use of pan-ethnic-group products form knowledge primarily depends on a designer's subjective experience without user participation. The majority of studies primarily focus on the detection of the perceptual demands of consumers from the target product category. A pan-ethnic-group products form gene clustering method based on emotional semantic is constructed. Consumers' perceptual images of the pan-ethnic-group products are obtained by means of product form gene extraction and coding and computer aided product form clustering technology. A case of form gene clustering about the typical pan-ethnic-group products is investigated which indicates that the method is feasible. This paper opens up a new direction for the future development of product form design which improves the agility of product design process in the era of Industry 4.0.

  8. Improvement of production layout based on optimum production balancing scale results by using Moodie Young and Comsoal method

    Science.gov (United States)

    Ikhsan, Siregar; Ulina Anastasia Sipangkar, Tri; Prasetio, Aji

    2017-09-01

    This research was conducted at a make to order production system company which is engaged in the car body of the vehicle. One of the products produced is dump truck which is one kind of transportation for the transport of goods equipped with hydraulics to facilitate goods’ loading and unloading process. The company has 7 work stations with different cycle times. Companies often experience delays in order delivery. The production process on the production floor has not been done optimally where there is a build up of work in process in some work centres. The build up of work in process (WIP) products is seen in the welding and painting stations. Stacking that occurs on the production line may cause the company to be liable for damages due to delays in product completion. The WIP occurs due to unbalanced paths can be seen from the variance of cycle time of each station is very diverse. The time difference of each work element is due to the allocation of work elements to each work centre unevenly. On the basis of the allocation of uneven work elements, the dump truck assembly line is made. The analysis is done by using Moodie Young and Comsoal method to do the balancing of production line. The result of layout improvement by using systematic layout planning (SLP) method is change the composition of the work centre from 7 into 4 work centre which enables the movement of material to be more effective and efficient so that it can get an efficient and effective production trajectory and can solve existing problems. The result of the track balancing is then used as a guide in constructing a new layout based on the balancing result with the most optimum method.

  9. UO2: production based on two alternative lines

    International Nuclear Information System (INIS)

    Coppa, R.C.; Martin, H.R.

    1987-01-01

    The production of the uranium dioxide (UO 2 ) is carried out at the Cordoba factory, of the Argentine National Atomic Energy Commission, by the uranil carbonate method (AUC). The commercial uranium concentrates (yellow cake) is dissolved with HNO 3 and purificated with tributil phosphate (TBP). The pure uranium compound coming from the reextraction, is concentrated to 0.4 Kg U/l, then the precipitation with CO 2 and NH 3 gives the AUC crystalls. After conversion of AUC to UO 2 powder, the pellets are obtained by direct compacting. In the second experimental method used by CNEA, the yellow cake is dissolved with H 2 SO 4 , and then it is purified with a terciary amine and precipitated with (NH 4 ) 2 CO 3 . In this form the ammonium uranil tri-carbonate (AUT) crystals are obtained. The convertion to UO 2 is made under an atmosphere of dissociated NH 3 . (M.E.L.) [es

  10. Photoelectrochemical based direct conversion systems for hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Kocha, S.; Peterson, M.; Arent, D. [National Renewable Energy Lab., Golden, CO (United States)] [and others

    1996-10-01

    Photon driven, direct conversion systems consist of a light absorber and a water splitting catalyst as a monolithic system; water is split directly upon illumination. This one-step process eliminates the need to generate electricity externally and subsequently feed it to an electrolyzer. These configurations require only the piping necessary for transport of hydrogen to an external storage system or gas pipeline. This work is focused on multiphoton photoelectrochemical devices for production of hydrogen directly using sunlight and water. Two types of multijunction cells, one consisting of a-Si triple junctions and the other GaInP{sub 2}/GaAs homojunctions, were studied for the photoelectrochemical decomposition of water into hydrogen and oxygen from an aqueous electrolyte solution. To catalyze the water decomposition process, the illuminated surface of the device was modified either by addition of platinum colloids or by coating with ruthenium dioxide. These colloids have been characterized by gel electrophoresis.

  11. Production and properties of bronze based cellular materials

    International Nuclear Information System (INIS)

    Strobl, S.; Danninger, H.

    2001-01-01

    For production of lightweight components, cellular materials offer attractive potential. Here, manufacturing of sintered bodies from bronze hollow spheres is described. The process starts with fabrication of hollow copper particles by cementation of Cu on iron particles. The still fragile Cu shells are consolidated by coating with Sn and subsequent gravity sintering. The resulting specimens exhibit a closed cell bronze structure with rather consistent morphology and cell wall thickness. The apparent density may range between 1.5 and 3.0 gcm -3 and can be controlled by variation of particle size and wall thickness. The mechanical behavior of the structures esp. during compressive loading is described and related to the microstructural parameters. (author)

  12. Advanced excimer-based crystallization systems for production solutions

    International Nuclear Information System (INIS)

    Simon, F.; Brune, J.; Herbst, L.

    2006-01-01

    Line beam excimer laser annealing (ELA) is a well-known technique for thin Si-film crystallization and established in LTPS mass production. With introduction of sequential lateral solidification (SLS) some aspects such as crystalline quality, throughput and flexibility regarding the substrate size could be improved, but for OLED manufacturing still further process development is necessary. This paper discusses line beam ELA and SLS-techniques that might enable process engineers to make polycrystalline-silicon (poly-Si) films with a high degree of uniformity and quality as required for system on glass (SOG) and active matrix organic light emitting displays (AMOLED). Equipment requirements are discussed and compared to previous standards. SEM-images of process examples are shown in order to demonstrate the viability

  13. Measuring a Country's Product Ladder and Technology Level based on Trade Flow

    Directory of Open Access Journals (Sweden)

    Jong-il Kim

    2006-06-01

    Full Text Available This study tries to quantify the technology level of products based on the concept of product ladder. While many studies on country technology competitiveness use the aggregate indices such as total factor productivity and revealed comparative advantage, this study estimates the ranking of about 2000 products in product ladder by using SITC 5 digit level export data. Based on the product ladder, this study measures the country and industry ranking and explores the characteristics of the ranking. It provides the international comparison of inter-industry and intra-industry ranking differences in product ladder. The statistical relationships between the ranking in product ladder and the determinants of technology level such as R&D and physical capital investment and wage, confirms that the measured ranking in product ladder could be regarded as an indirect indicator of technology level. The product ladder is applied to the estimation of production function to see the effect of the product differentiation on labor productivity.

  14. Radiological aspects in a monazite based rare earth production facility

    International Nuclear Information System (INIS)

    Harikumar, M.; Sujata, R.; Chinnaesakki, S.; Tripathi, R.M.; Puranik, V.D.; Nair, N.N.G.

    2011-01-01

    One of the largest reserves of monazite in the world is present in the Indian subcontinent. Monazite ore has around 8-9% thorium oxide and nearly 60% Rare earth oxides. Selective acid extraction is used to separate the composite rare earths. The main radiological hazard arises from the presence of thorium and its daughter products. Monitoring of the radiation field and air activity in the rare earths plant is done routinely to reduce the radiation exposure to plant personnel. The separation of uranium and rare earths from Thorium concentrate separated from Monazite is being done as a part of the THRUST (Thorium Retrieval, Recovery of Uranium and Re-storage of Thorium) project from 2004 at Indian Rare Earths Limited, Udyogamandal. The radiological aspect for this extraction of uranium and rare earths was studied. The general radiation field in the rare earth production plant was 0.3-5.0 μGyh -1 and the average short lived air activity was 46 ± 7 mWL. The long lived air activity arising from 232 Th is very insignificant radiologically. The occupational radiation exposure for the rare earths separation plant is only 6 % of the total dose and the estimated average individual dose is 1.6 mSv per year. Studies were also done to estimate the residual radioactivity in the separated rare earth compounds using gamma spectrometry and the results showed significant presence of 227 Ac arising due to the protactinium fraction in the thorium concentrate. This activity is not detectable in a freshly separated rare earth compound but can buildup with time. (author)

  15. Production of effective microorganism using halal based sources: A ...

    African Journals Online (AJOL)

    Malaysia is recognized as a modern Islamic country; citizens have concerns regarding halal issues associated with EM ingredients, which are not clearly mentioned by the manufacturer. Hence, a halal-based source is suggested in the utilization of EM technology. This study presents the development and applications of ...

  16. Assessing Children's Writing Products: The Role of Curriculum Based Measures

    Science.gov (United States)

    Dockrell, Julie E.; Connelly, Vincent; Walter, Kirsty; Critten, Sarah

    2015-01-01

    The assessment of children's writing raises technical and practical challenges. In this paper we examine the potential use of a curriculum based measure for writing (CBM-W) to assess the written texts of pupils in Key Stage 2 (M age 107 months, range 88 to 125). Two hundred and thirty six Year three, five and six pupils completed a standardized…

  17. Economics-based optimal control of greenhouse tomato crop production

    NARCIS (Netherlands)

    Tap, F.

    2000-01-01

    The design and testing of an optimal control algorithm, based on scientific models of greenhouse and tomato crop and an economic criterion (goal function), to control greenhouse climate, is described. An important characteristic of this control is that it aims at maximising an economic

  18. A Data Base System To Enhance Exploitation Effectiveness And Productivity

    Science.gov (United States)

    Eisman, Lee

    1989-02-01

    The ever expanding uses of remote sensing continue to drive requirements in industry, Government, and the military for an imagery data base and processing system that provides timely, flexible support to imagery analysts and yet is simple to use. This paper describes a system called the Digital Enhancement Data Base System (DEDS) that allows real-time image processing, storage, display, and enhancement of multisensor imagery, charts, and textual data. It is an imagery analyst's interactive "shoe box" that can replace hundreds of pounds of hardcopy imagery and collateral information by storing that data in digital, video, and analog forms. The system contains a graphics package that allows annotation of the data to be stored. A split-screen display feature allows side-by-side comparison of new imagery or data with collateral information retrieved from the data base. Futhermore, information in the data base can be recalled and distributed via local wide-area communications networks. The complete system is designed to operate within ruggedized, transportable cases.

  19. Production of effective microorganism using halal- based sources: A ...

    African Journals Online (AJOL)

    GREGORY

    2011-12-16

    Dec 16, 2011 ... Key words: Component, effective microorganisms (EM), agriculture, halal-based source. INTRODUCTION. In recent years, with focus on feeding a rapidly growing human population, Malaysia has jeopardized the environ- ment and its natural resources, which are already under great stress. Consequently ...

  20. Roadmap to tracking based business and intelligent products

    NARCIS (Netherlands)

    Holmström, J.; Kajosaari, R.; Främling, K.; Langius, E.A.F.

    2009-01-01

    Item-centric tracking is an opportunity to increase visibility and control in different operations of a company. The economical feasibility of item-centric tracking is based on recent technological developments for monitoring the material flow on the item-level instead of the material type-level. It

  1. Introduction of a method for presenting health-based impacts of the emission from products, based on emission measurements of materials used in manufacturing of the products

    Energy Technology Data Exchange (ETDEWEB)

    Jørgensen, Rikke Bramming, E-mail: rikke.jorgensen@iot.ntnu.no

    2013-11-15

    A method for presenting the health impact of emissions from furniture is introduced, which could be used in the context of environmental product declarations. The health impact is described by the negative indoor air quality potential, the carcinogenic potential, the mutagenic and reprotoxic potential, the allergenic potential, and the toxicological potential. An experimental study of emissions from four pieces of furniture is performed by testing both the materials used for production of the furniture and the complete piece of furniture, in order to compare the results gained by adding emissions of material with results gained from testing the finished piece of furniture. Calculating the emission from a product based on the emission from materials used in the manufacture of the product is a new idea. The relation between calculated results and measured results from the same products differ between the four pieces of furniture tested. Large differences between measured and calculated values are seen for leather products. More knowledge is needed to understand why these differences arise. Testing materials allows us to compare different suppliers of the same material. Four different foams and three different timber materials are tested, and the results vary between materials of the same type. If the manufacturer possesses this type of knowledge of the materials from the subcontractors it could be used as a selection criterion according to production of low emission products. -- Highlights: • A method for presenting health impact of emissions is introduced. • An experimental study of emissions from four pieces of furniture is performed. • Health impact is calculated based on sum of contribution from the materials used. • Calculated health impact is compared to health impact of the manufactured product. • The results show that health impact could be useful in product development and for presentation in EPDs.

  2. Effect of base media on the stability of annatto dye in industrial products

    International Nuclear Information System (INIS)

    Audetuyi, A.O.; Lajide, L.; Popoola, A.V.

    2006-01-01

    Colour stability of the versatile annatto dye was examined to monitor the effects of base media on industrial products. The dye was incorporated in two media, namely, palm kernel oil used in products such as body cream and soap, and paraffin wax used in shoe polish and household candle wax. These products were exposed to various light conditions for a specific period before assessment. The melting point of the dye was determined as 176-178 degree C with a molar absorptivity of 13,600 mol/sub -1/ cm/sub -1/ at 545 nm. It imparted its brilliant yellow/orange colouration in industrial products as the colour stability depends on the compounding base media of the products. Losses of beta-carotene was higher and faster in nonaqueous environment as paraffin wax showed low fastness rating values, than in the palm kernel oil based aqueous medium products. (author)

  3. PC based diagnostic system for nitrogen production unit of HWP

    International Nuclear Information System (INIS)

    Lamba, D.S.; Rao, V.C.; Krishnan, S.; Kamaraj, T.; Krishnaswamy, C.

    1992-01-01

    The plant diagnostic system monitors the input data from local processing unit and tries to diagnose the cause of the failure. The system is a rule based application program that can perform tasks itself using fault tree model which displays the logical relationships between critical events and their possible ways occurrence, i.e. hardware failure, process faults and human error etc. Unit 37 Nitrogen Plant is taken as a prototype model for trying the plant diagnostics system. (author). 3 refs., 2 figs

  4. Allocation base of general production costs as optimization of prime costs

    Directory of Open Access Journals (Sweden)

    Levytska I.O.

    2017-03-01

    Full Text Available Qualified management aimed at optimizing financial results is the key factor in today's society. Effective management decisions depend on the necessary information about the costs of production process in all its aspects – their structure, types, accounting policies of reflecting costs. General production costs, the so-called indirect costs that are not directly related to the production process, but provide its functioning in terms of supporting structural divisions and create the necessary conditions of production, play a significant role in calculating prime costs of goods (works, services. However, the accurate estimate of prime costs of goods (works, services should be determined with the value of indirect costs (in other words, general production costs, and properly determined with the base of their allocation. The choice of allocation base of general production costs is the significant moment, depending on the nature of business, which must guarantee fair distribution regarding to the largest share of direct expenses in the total structure of production costs. The study finds the essence of general production costs based on the analysis of key definitions of leading Ukrainian economists. The optimal allocation approach of general production costs is to calculate these costs as direct production costs within each subsidiary division (department separately without selecting a base as the main one to the their total amount.

  5. Design of an Emulsion-based Personal Detergent through a Model-based Chemical Product Design Methodology

    DEFF Research Database (Denmark)

    Mattei, Michele; Hill, Michael; Kontogeorgis, Georgios

    2013-01-01

    An extended systematic methodology for the design of emulsion-based Chemical products is presented. The methodology consists of a model-based framework involving seven sequential hierarchical steps: starting with the identification of the needs to be satisfied by the product and then adding one-b...... to obtain one or more candidate formulations. A conceptual casestudy representing a personal detergent is presented to highlight the methodology....

  6. Design of an Emulsion-based Personal Detergent through a Model-based Chemical Product Design Methodology

    DEFF Research Database (Denmark)

    Mattei, Michele; Hill, Michael; Kontogeorgis, Georgios

    2013-01-01

    An extended systematic methodology for the design of emulsion-based Chemical products is presented. The methodology consists of a model-based framework involving seven sequential hierarchical steps: starting with the identification of the needs to be satisfied by the product and then adding one...... to obtain one or more candidate formulations. A conceptual casestudy representing a personal detergent is presented to highlight the methodology....

  7. Production Planning with Respect to Uncertainties. Simulator Based Production Planning of Average Sized Combined Heat and Power Production Plants; Produktionsplanering under osaekerhet. Simulatorbaserad produktionsplanering av medelstora kraftvaermeanlaeggningar

    Energy Technology Data Exchange (ETDEWEB)

    Haeggstaahl, Daniel [Maelardalen Univ., Vaesteraas (Sweden); Dotzauer, Erik [AB Fortum, Stockholm (Sweden)

    2004-12-01

    Production planning in Combined Heat and Power (CHP) systems is considered. The focus is on development and use of mathematical models and methods. Different aspects on production planning are discussed, including weather and load predictions. Questions relevant on the different planning horizons are illuminated. The main purpose with short-term (one week) planning is to decide when to start and stop the production units, and to decide how to use the heat storage. The main conclusion from the outline of pros and cons of commercial planning software are that several are using Mixed Integer Programming (MIP). In that sense they are similar. Building a production planning model means that the planning problem is formulated as a mathematical optimization problem. The accuracy of the input data determines the practical detail level of the model. Two alternatives to the methods used in today's commercial programs are proposed: stochastic optimization and simulator-based optimization. The basic concepts of mathematical optimization are outlined. A simulator-based model for short-term planning is developed. The purpose is to minimize the production costs, depending on the heat demand in the district heating system, prices of electricity and fuels, emission taxes and fees, etc. The problem is simplified by not including any time-linking conditions. The process model is developed in IPSEpro, a heat and mass-balance software from SimTech Simulation Technology. TOMLAB, an optimization toolbox in MATLAB, is used as optimizer. Three different solvers are applied: glcFast, glcCluster and SNOPT. The link between TOMLAB and IPSEpro is accomplished using the Microsoft COM technology. MATLAB is the automation client and contains the control of IPSEpro and TOMLAB. The simulator-based model is applied to the CHP plant in Eskilstuna. Two days are chosen and analyzed. The optimized production is compared to the measured. A sensitivity analysis on how variations in outdoor

  8. Factors Affecting Aerosol Radiative Forcing from Both Production-based and Consumption-based View

    Science.gov (United States)

    Wang, J.; Lin, J.; Ni, R.

    2017-12-01

    Aerosol radiative forcing (RF) is determined by emissions and various chemical-transport-radiative processes in the atmosphere, a multi-factor problem whose individual contributors have not been well quantified. This problem becomes more complicated when taking into account the role of international trade, which means reallocated aerosol RF due to separation of regions producing goods and emissions and regions consuming those goods. Here we analyze major factors affecting RF of secondary inorganic aerosols (SIOAs, including sulfate, nitrate and ammonium), primary organic aerosol (POA) and black carbon (BC), extending the work of Lin et al. (2016, Nature Geoscience). We contrast five factors determining production-based (RFp, due to a region's production of goods) and consumption-based (RFc, due to a region's consumption) forcing by 11 major regions, including population size, per capita output, emission intensity (emission per output), chemical efficiency (mass per unit emission) and radiative efficiency (RF per unit mass). Comparing across the 11 regions, East Asia produces the strongest RFp and RFc of SIOA and BC and the second largest RFp and RFc of POA primarily due to its high emission intensity. Although Middle East and North Africa has low emissions, its RFp is strengthened by its largest chemical efficiency for POA and BC and second largest chemical efficiency for SIOA. However, RFp of South-East Asia and Pacific is greatly weakened by its lowest chemical efficiency. Economic trade means that net importers (Western Europe, North America and Pacific OECD) have higher RFc than RFp by 50-100%. And such forcing difference is mainly due to the high emission intensity of the exporters supplying these regions. For North America, SIOA's RFc is 50% stronger than RFp, for that emission intensity of SIOA is 5.2 times in East Asia and 2.5 times in Latin America and Caribbean compared with that in North America, and the chemical efficiency in the top four exporters are

  9. Microbial Diversity-Based Novel Crop Protection Products

    Energy Technology Data Exchange (ETDEWEB)

    Pioneer Hi-Bred International Inc.; DuPont Experimental Station; Yalpani, Ronald Flannagan, Rafael Herrmann, James Presnail, Tamas Torok, and Nasser; Herrmann, Rafael; Presnail, James; Torok, Tamas; Yalpani, Nasser

    2007-05-10

    Extremophilic microorganisms are adapted to survive in ecological niches with high temperatures, extremes of pH, high salt concentrations, high pressure, radiation, etc. Extremophiles produce unique biocatalysts and natural products that function under extreme conditions comparab le to those prevailing in various industrial processes. Therefore, there is burgeoning interest in bioprospecting for extremophiles with potential immediate use in agriculture, the food, chemical, and pharm aceutical industries, and environmental biotechnology. Over the years, several thousand extremophilic bacteria, archaea, and filamentous fungi were collected at extreme environmental sites in the USA, the Chernobyl Exclusion Zone surrounding the faeild nuclear power plant in Ukraine, in and around Lake Baikal in Siberia, and at geothermal sites on the Kamchatka peninsula in Russia. These organisms were cultured under proprietary conditions, and the cell- free supernatants were screened for biological activities against plant pathogenic fungi and major crop damaging insects. Promising peptide lead molecules were isolated, characterized, and sequenced. Relatively high hit rates characterized the tested fermentation broths. Of the 26,000 samples screened, over thousand contained biological activity of interest. A fair number of microorganisms expressed broad- spectrum antifungal or insecticidal activity. Two- dozen broadly antifungal peptides (AFPs) are alr eady patent protected, and many more tens are under further investigation. Tapping the gene pool of extremophilic microorganisms to provide novel ways of crop protection proved a successful strategy.

  10. Microbial Diversity-Based Novel Crop Protection Products

    International Nuclear Information System (INIS)

    Flannagan, Ronald; Herrmann, Rafael; Presnail, James; Torok, Tamas; Yalpani, Nasser

    2007-01-01

    Extremophilic microorganisms are adapted to survive in ecological niches with high temperatures, extremes of pH, high salt concentrations, high pressure, radiation, etc. Extremophiles produce unique biocatalysts and natural products that function under extreme conditions comparab le to those prevailing in various industrial processes. Therefore, there is burgeoning interest in bioprospecting for extremophiles with potential immediate use in agriculture, the food, chemical, and pharm aceutical industries, and environmental biotechnology. Over the years, several thousand extremophilic bacteria, archaea, and filamentous fungi were collected at extreme environmental sites in the USA, the Chernobyl Exclusion Zone surrounding the faeild nuclear power plant in Ukraine, in and around Lake Baikal in Siberia, and at geothermal sites on the Kamchatka peninsula in Russia. These organisms were cultured under proprietary conditions, and the cell- free supernatants were screened for biological activities against plant pathogenic fungi and major crop damaging insects. Promising peptide lead molecules were isolated, characterized, and sequenced. Relatively high hit rates characterized the tested fermentation broths. Of the 26,000 samples screened, over thousand contained biological activity of interest. A fair number of microorganisms expressed broad- spectrum antifungal or insecticidal activity. Two- dozen broadly antifungal peptides (AFPs) are alr eady patent protected, and many more tens are under further investigation. Tapping the gene pool of extremophilic microorganisms to provide novel ways of crop protection proved a successful strategy.

  11. Selecting Products Considering the Regret Behavior of Consumer: A Decision Support Model Based on Online Ratings

    Directory of Open Access Journals (Sweden)

    Xia Liang

    2018-05-01

    Full Text Available With the remarkable promotion of e-commerce platforms, consumers increasingly prefer to purchase products online. Online ratings facilitate consumers to choose among products. Thus, to help consumers effectively select products, it is necessary to provide decision support methods for consumers to trade online. Considering the decision makers are bounded rational, this paper proposes a novel decision support model for product selection based on online ratings, in which the regret aversion behavior of consumers is formulated. Massive online ratings provided by experienced consumers for alternative products associated with several evaluation attributes are obtained by software finders. Then, the evaluations of alternative products in format of stochastic variables are conducted. To select a desirable alternative product, a novel method is introduced to calculate gain and loss degrees of each alternative over others. Considering the regret behavior of consumers in the product selection process, the regret and rejoice values of alternative products for consumer are computed to obtain the perceived utility values of alternative products. According to the prior order of the evaluation attributes provided by the consumer, the prior weights of attributes are determined based on the perceived utility values of alternative products. Furthermore, the overall perceived utility values of alternative products are obtained to generate a ranking result. Finally, a practical example from Zol.com.cn for tablet computer selection is used to demonstrate the feasibility and practically of the proposed model.

  12. Synthetic biology for microbial production of lipid-based biofuels.

    Science.gov (United States)

    d'Espaux, Leo; Mendez-Perez, Daniel; Li, Rachel; Keasling, Jay D

    2015-12-01

    The risks of maintaining current CO2 emission trends have led to interest in producing biofuels using engineered microbes. Microbial biofuels reduce emissions because CO2 produced by fuel combustion is offset by CO2 captured by growing biomass, which is later used as feedstock for biofuel fermentation. Hydrocarbons found in petroleum fuels share striking similarity with biological lipids. Here we review synthetic metabolic pathways based on fatty acid and isoprenoid metabolism to produce alkanes and other molecules suitable as biofuels. We further discuss engineering strategies to optimize engineered biosynthetic routes, as well as the potential of synthetic biology for sustainable manufacturing. Published by Elsevier Ltd.

  13. Knowledge Based Product Configuration - a documentatio tool for configuration projects

    DEFF Research Database (Denmark)

    Hvam, Lars; Malis, Martin

    2003-01-01

    . A lot of knowledge isput into these systems and many domain experts are involved. This calls for an effective documentation system in order to structure this knowledge in a way that fits to the systems. Standard configuration systems do not support this kind of documentation. The chapter deals...... with the development of a Lotus Notes application that serves as a knowledge based documentation tool for configuration projects. A prototype has been developed and tested empirically in an industrial case-company. It has proved to be a succes....

  14. Synthetic biology for microbial production of lipid-based biofuels

    Energy Technology Data Exchange (ETDEWEB)

    d' Espaux, L; Mendez-Perez, D; Li, R; Keasling, JD

    2015-10-23

    The risks of maintaining current CO2 emission trends have led to interest in producing biofuels using engineered microbes. Microbial biofuels reduce emissions because CO2 produced by fuel combustion is offset by CO2 captured by growing biomass, which is later used as feedstock for biofuel fermentation. Hydrocarbons found in petroleum fuels share striking similarity with biological lipids. Here in this paper we review synthetic metabolic pathways based on fatty acid and isoprenoid metabolism to produce alkanes and other molecules suitable as biofuels. Lastly, we further discuss engineering strategies to optimize engineered biosynthetic routes, as well as the potential of synthetic biology for sustainable manufacturing.

  15. MHTGR: New production reactor summary of experience base

    International Nuclear Information System (INIS)

    1988-03-01

    Worldwide interest in the Modular High-Temperature Gas-Cooled Reactor (MHTGR) stems from the capability of the system to retain the advanced fuel and thermal performance while providing unparalleled levels of safety. The small power level of the MHTGR and its passive systems give it a margin of safety not attained by other concepts being developed for power generation. This report covers the experience base for the key nuclear system, components, and processes related to the MHTGR-NPR. 9 refs., 39 figs., 9 tabs

  16. Market-based process and product innovation in the food sector: A Danish research programme

    DEFF Research Database (Denmark)

    Grunert, Klaus G.; Baadsgaard, Allan

    1992-01-01

    This note informs about the Danish MAPP research programme, a collection of 15 research projects aimed at making product and process innovation in the food sector more market-based. The programme, which has an interdisciplinary base, but is geared towards marketing applications, is concerned...... with the organization of the innovation process, the interaction of consumer and producer criteria in product development, the assessment of long-term developments in the market environment and the role distribution system in product innovation. Innovation in both primary production and processing are considered....

  17. Combining product attributes with recommendation and shopping location attributes to assess consumer preferences for insect-based food products

    DEFF Research Database (Denmark)

    Alemu, Mohammed Hussen; Olsen, Søren Bøye; Vedel, Suzanne Elizabeth

    2017-01-01

    into consumers' preferences for termite-based food products (TBFPs) using data from a choice experiment survey in Kenya. A novel feature of this paper is that it investigates the combined effects of product-related and contextual attributes, as well as consumer attitudes on preferences for TBFPs. In addition......, the paper focuses on the extent to which preferences may be affected depending on the meal formats, i.e. whether the termites are introduced either as whole insects or as a processed component in a typical daily meal. The results suggest that consumers prefer TBFPs with high nutritional value and especially...... when they are recommended by officials. Results further indicate that affirmative recommendations are particularly important for the processed TBFP, and consumers prefer to buy this type of product in kiosks or supermarkets than at local marketplaces. Despite a considerable degree of preference...

  18. Strategies in Development and Delivery of Nanotechnology Based Cosmetic Products.

    Science.gov (United States)

    Ahmad, Usama; Ahmad, Zeeshan; Khan, Ahmed Abdullah; Akhtar, Juber; Singh, Satya Prakash; Ahmad, Farhan Jalees

    2018-03-26

    The science of formulation involving cosmetic ingredients has always been a challenge since the release of active components greatly depends upon the carrier system involved and the selectivity of skin barrier. The principle obstacle of the skin resides in the epidermis and it's hard for many active components to cross it. The formulation related factors like size of particles, viscosity and lipophilicity of the components also play an important role in permeation of the dermal composition. Though widely used; conventional creams and gels still struggle in terms of success. This work focuses on nano based formulation strategies for successful delivery of cosmetic agents. Novel strategies like nanoemulsion, nanogels, liposomes, aquasomes, niosomes, dendrimers and fullerenes have paved way for successful delivery of dermal formulations to desire depths in the skin. © Georg Thieme Verlag KG Stuttgart · New York.

  19. Facilities for preparing actinide or fission product-based targets

    CERN Document Server

    Sors, M

    1999-01-01

    Research and development work is currently in progress in France on the feasibility of transmutation of very long-lived radionuclides such as americium, blended with an inert medium such as magnesium oxide and pelletized for irradiation in a fast neutron reactor. The process is primarily designed to produce ceramics for nuclear reactors, but could also be used to produce targets for accelerators. The Actinide Development Laboratory is part of the ATALANTE complex at Marcoule, where the CEA investigates reprocessing, liquid and solid waste treatment and vitrification processes. The laboratory produces radioactive sources; after use, their constituents are recycled, notably through R and D programs requiring such materials. Recovered americium is purified, characterized and transformed for an experiment known as ECRIX, designed to demonstrate the feasibility of fabricating americium-based ceramics and to determine the reactor transmutation coefficients.

  20. Production and chemical composition of two dehydrated fermented dairy products based on cow or goat milk.

    Science.gov (United States)

    Moreno-Fernández, Jorge; Díaz-Castro, Javier; Alférez, Maria J M; Hijano, Silvia; Nestares, Teresa; López-Aliaga, Inmaculada

    2016-02-01

    The aim of this study was to identify the differences between the main macro and micronutrients including proteins, fat, minerals and vitamins in cow and goat dehydrated fermented milks. Fermented goat milk had higher protein and lower ash content. All amino acids (except for Ala), were higher in fermented goat milk than in fermented cow milk. Except for the values of C11:0, C13:0, C16:0, C18:0, C20:5, C22:5 and the total quantity of saturated and monounsaturated fatty acids, all the other fatty acid studied were significantly different in both fermented milks. Ca, Mg, Zn, Fe, Cu and Se were higher in fermented goat milk. Fermented goat milk had lower amounts of folic acid, vitamin E and C, and higher values of vitamin A, D3, B6 and B12. The current study demonstrates the better nutritional characteristics of fermented goat milk, suggesting a potential role of this dairy product as a high nutritional value food.

  1. Microstructural characterization of catalysis product of nanocement based materials: A review

    Science.gov (United States)

    Sutan, Norsuzailina Mohamed; Izaitul Akma Ideris, Nur; Taib, Siti Noor Linda; Lee, Delsye Teo Ching; Hassan, Alsidqi; Kudnie Sahari, Siti; Mohamad Said, Khairul Anwar; Rahman Sobuz, Habibur

    2018-03-01

    Cement as an essential element for cement-based products contributed to negative environmental issues due to its high energy consumption and carbon dioxide emission during its production. These issues create the need to find alternative materials as partial cement replacement where studies on the potential of utilizing silica based materials as partial cement replacement come into picture. This review highlights the effectiveness of microstructural characterization techniques that have been used in the studies that focus on characterization of calcium hydroxide (CH) and calcium silicate hydrate (C-S-H) formation during hydration process of cement-based product incorporating nano reactive silica based materials as partial cement replacement. Understanding the effect of these materials as cement replacement in cement based product focusing on the microstructural development will lead to a higher confidence in the use of industrial waste as a new non-conventional material in construction industry that can catalyse rapid and innovative advances in green technology.

  2. Microstructural characterization of catalysis product of nanocement based materials: A review

    Directory of Open Access Journals (Sweden)

    Mohamed Sutan Norsuzailina

    2018-01-01

    Full Text Available Cement as an essential element for cement-based products contributed to negative environmental issues due to its high energy consumption and carbon dioxide emission during its production. These issues create the need to find alternative materials as partial cement replacement where studies on the potential of utilizing silica based materials as partial cement replacement come into picture. This review highlights the effectiveness of microstructural characterization techniques that have been used in the studies that focus on characterization of calcium hydroxide (CH and calcium silicate hydrate (C-S-H formation during hydration process of cement-based product incorporating nano reactive silica based materials as partial cement replacement. Understanding the effect of these materials as cement replacement in cement based product focusing on the microstructural development will lead to a higher confidence in the use of industrial waste as a new non-conventional material in construction industry that can catalyse rapid and innovative advances in green technology.

  3. Life cycle energy efficiency and environmental impact assessment of bioethanol production from sweet potato based on different production modes

    Science.gov (United States)

    Zhang, Jun; Jia, Chunrong; Wu, Yi; Xi, Beidou; Wang, Lijun; Zhai, Youlong

    2017-01-01

    The bioethanol is playing an increasingly important role in renewable energy in China. Based on the theory of circular economy, integration of different resources by polygeneration is one of the solutions to improve energy efficiency and to reduce environmental impact. In this study, three modes of bioethanol production were selected to evaluate the life cycle energy efficiency and environmental impact of sweet potato-based bioethanol. The results showed that, the net energy ratio was greater than 1 and the value of net energy gain was positive in the three production modes, in which the maximum value appeared in the circular economy mode (CEM). The environment emission mainly occurred to bioethanol conversion unit in the conventional production mode (CPM) and the cogeneration mode (CGM), and eutrophication potential (EP) and global warming potential (GWP) were the most significant environmental impact category. While compared with CPM and CGM, the environmental impact of CEM significantly declined due to increasing recycling, and plant cultivation unit mainly contributed to EP and GWP. And the comprehensive evaluation score of environmental impact decreased by 73.46% and 23.36%. This study showed that CEM was effective in improving energy efficiency, especially in reducing the environmental impact, and it provides a new method for bioethanol production. PMID:28672044

  4. Visual Perception-Based Statistical Modeling of Complex Grain Image for Product Quality Monitoring and Supervision on Assembly Production Line.

    Directory of Open Access Journals (Sweden)

    Jinping Liu

    Full Text Available Computer vision as a fast, low-cost, noncontact, and online monitoring technology has been an important tool to inspect product quality, particularly on a large-scale assembly production line. However, the current industrial vision system is far from satisfactory in the intelligent perception of complex grain images, comprising a large number of local homogeneous fragmentations or patches without distinct foreground and background. We attempt to solve this problem based on the statistical modeling of spatial structures of grain images. We present a physical explanation in advance to indicate that the spatial structures of the complex grain images are subject to a representative Weibull distribution according to the theory of sequential fragmentation, which is well known in the continued comminution of ore grinding. To delineate the spatial structure of the grain image, we present a method of multiscale and omnidirectional Gaussian derivative filtering. Then, a product quality classifier based on sparse multikernel-least squares support vector machine is proposed to solve the low-confidence classification problem of imbalanced data distribution. The proposed method is applied on the assembly line of a food-processing enterprise to classify (or identify automatically the production quality of rice. The experiments on the real application case, compared with the commonly used methods, illustrate the validity of our method.

  5. Visual Perception-Based Statistical Modeling of Complex Grain Image for Product Quality Monitoring and Supervision on Assembly Production Line.

    Science.gov (United States)

    Liu, Jinping; Tang, Zhaohui; Zhang, Jin; Chen, Qing; Xu, Pengfei; Liu, Wenzhong

    2016-01-01

    Computer vision as a fast, low-cost, noncontact, and online monitoring technology has been an important tool to inspect product quality, particularly on a large-scale assembly production line. However, the current industrial vision system is far from satisfactory in the intelligent perception of complex grain images, comprising a large number of local homogeneous fragmentations or patches without distinct foreground and background. We attempt to solve this problem based on the statistical modeling of spatial structures of grain images. We present a physical explanation in advance to indicate that the spatial structures of the complex grain images are subject to a representative Weibull distribution according to the theory of sequential fragmentation, which is well known in the continued comminution of ore grinding. To delineate the spatial structure of the grain image, we present a method of multiscale and omnidirectional Gaussian derivative filtering. Then, a product quality classifier based on sparse multikernel-least squares support vector machine is proposed to solve the low-confidence classification problem of imbalanced data distribution. The proposed method is applied on the assembly line of a food-processing enterprise to classify (or identify) automatically the production quality of rice. The experiments on the real application case, compared with the commonly used methods, illustrate the validity of our method.

  6. Feasibility model study for Blumbangreksa product model based on lean startup method

    Science.gov (United States)

    Pakpahan, A. K.; Dewobroto, W. S.; Pratama, R. Y.

    2017-12-01

    Based on the data from Ministry of Maritime Affairs and Fisheries in 2015, the productivity of shrimp farmers in Indonesia is still below China, India and Thailand, because of the low survival rate of shrimp seeds were planted in Indonesia. Water quality factors become a significant factor that increasesthe survival rate of shrimp seeds plantation, therefore team of PT. Atnic EkoteknoWicaksana create a tool called Blumbangreksa that able to monitor water quality of shrimp farms, measure temperature, salinity, pH, DO (dissolved oxygen), TDS (total dissolve solid) in water and moist air over the surface of the water and GSM -based and Internet of things. Based on the research results, unique value proposition of Blumbangreksa products is the measurement result of water quality are accurate, real-time measurements, based on Internet of things and have the ability measurements at once. Based on the feasibility study using the opportunity assessment of Marty Cagan, it can be seen that the product has fulfilled ten elements of assessment opportunity, so Blumbangreksa products are considered feasible. Initial investment fund of Blumbangreksa products is Rp 1,369,856,574, with profitability index of 1:51 and average breakeven products each year as many as 18 products are sold, and the payback period for 4 years and 2 months, therefore the business of Blumbangreksa product is feasible.

  7. O2O - Based Agricultural Products Supply Chain Process Integration Optimization Based on Internet +

    OpenAIRE

    Li Huijuan

    2017-01-01

    Traditional wholesale and retail, electricity supplier of agricultural products supply chain have many difficulties. The O2O supply chain of agricultural products of “Internet+”, committed to the integration of online and offline advantage process, has become the main direction of the agricultural products supply chain transformation. Practice operation results show that O2O supply chain can effectively play the advantages of online and offline process integration, but its further development...

  8. Composting plant conversion for the production of bio based products; Konversion eines Kompostwerkes zur Herstellung biobasierter Produkte

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, Marc [Universitaetsklinikum Jena (Germany). Stabsstelle Umweltschutz

    2013-03-15

    The intention behind this paper is to explore the potential of extracting bio based products such as lactic acid and further organic acid compounds during a successful composting process, by inserting an additional pre-treatment level into the existing process. The fundamental idea of extracting bio based products and biogas is based on the extension of a composting plant with an anaerobic intermediate level of maceration and a bypass reactor as a potential bio-refinery. For the extraction of carboxylic acid out of the macerated substance the principle of electrodialysis on a laboratory scale can be successfully verified by means of concentration of free acids. The concluding assessment of the composting plant Darmstadt-Kranichstein with regards to its potential shows that further examination on a large scale for the extraction of biobased products using biowaste is deemed to be appropriate on material and energetic consideration. The study demonstrates the potential for a combined aerobic/anaerobic plant with composting, renewable energy and secondary raw materials generation. (orig.)

  9. Whole-system nutrient enrichment increases secondary production in a detritus-based ecosystem

    Science.gov (United States)

    W.F. Cross; J.B. Wallace; A.D. Rosemond; S.L. Eggert

    2006-01-01

    Although the effects of nutrient enrichment on consumer-resource dynamics are relatively well studied in ecosystems based on living plants, little is known about the manner in which enrichment influences the dynamics and productivity of consumers and resources in detritus-based ecosystems. Because nutrients can stimulate loss of carbon at the base of detrital food webs...

  10. Consumer perception of bio-based products-An exploratory study in 5 European countries

    NARCIS (Netherlands)

    Sijtsema, Siet J.; Onwezen, Marleen C.; Reinders, Machiel J.; Dagevos, Hans; Partanen, Asta; Meeusen-van Onna, Marieke

    2016-01-01

    This study explores people's perceptions (i.e., positive and negative associations, mixed feelings) regarding the concept of 'bio-based' in general and specific bio-based products. This exploratory study is one of the first consumer studies in the field of bio-based research. Three focus group

  11. Preparing skilled labor in industry through production-based curriculum approach in vocational high school

    Science.gov (United States)

    Yoto

    2017-09-01

    Vocational high school (Sekolah Menengah Kejuruan / SMK) aims to prepare mid-level skilled labors to work in the industry and are able to create self-employment opportunities. For those reasons, the curriculum in SMK should be based on meeting the needs of the industries and is able to prepare learners to master the competence in accordance with the skills program of their choice. Production based curriculum is the curriculum which the learning process is designed together with the production process or using production process as a learning medium. This approach with the primary intention to introduce students with the real working environment and not merely simulations. In the production-based curriculum implementation model, students are directly involved in the industry through the implementation of industrial working practices, do work on production units in school, and do practical work in school by doing the job as done in the industry by using industry standards machines.

  12. Weather based risks and insurances for agricultural production

    Science.gov (United States)

    Gobin, Anne

    2015-04-01

    Extreme weather events such as frost, drought, heat waves and rain storms can have devastating effects on cropping systems. According to both the agriculture and finance sectors, a risk assessment of extreme weather events and their impact on cropping systems is needed. The principle of return periods or frequencies of natural hazards is adopted in many countries as the basis of eligibility for the compensation of associated losses. For adequate risk management and eligibility, hazard maps for events with a 20-year return period are often used. Damages due to extreme events are strongly dependent on crop type, crop stage, soil type and soil conditions. The impact of extreme weather events particularly during the sensitive periods of the farming calendar therefore requires a modelling approach to capture the mixture of non-linear interactions between the crop, its environment and the occurrence of the meteorological event in the farming calendar. Physically based crop models such as REGCROP (Gobin, 2010) assist in understanding the links between different factors causing crop damage. Subsequent examination of the frequency, magnitude and impacts of frost, drought, heat stress and soil moisture stress in relation to the cropping season and crop sensitive stages allows for risk profiles to be confronted with yields, yield losses and insurance claims. The methodology is demonstrated for arable food crops, bio-energy crops and fruit. The perspective of rising risk-exposure is exacerbated further by limited aid received for agricultural damage, an overall reduction of direct income support to farmers and projected intensification of weather extremes with climate change. Though average yields have risen continuously due to technological advances, there is no evidence that relative tolerance to adverse weather events has improved. The research is funded by the Belgian Science Policy Organisation (Belspo) under contract nr SD/RI/03A.

  13. Les bases de données bibliographiques pour l'exploration et la production des hydrocarbures Bibliographic Data Bases for Hydrocarbon Prospection and Production

    Directory of Open Access Journals (Sweden)

    Chambre Syndicale du Pétrole

    2006-11-01

    Full Text Available Les bases de données bibliographiques accessibles en ligne sont un outil très efficace pour qui cherche des documents scientifiques et techniques, mais il faut bien les connaître pour savoir les sélectionner. Deux types de bases de données sont présentées. D'abord celles qui couvrent les différents domaines qui composent l'exploration et la production des hydrocarbures : géologie, géophysique, forage, production et récupération assistée, économie et actualités, énergie et environnement. Ensuite, celles qui couvrent un type particulier de document : brevets, rapports, thèses, actes de congrès, normes et spécifications, livres, traductions, citations. Des fiches descriptives répertorient les caractéristiques des bases de données présentées dans chacune des sections. Bibliographic data bases accessible online make a very effective tool for searching for scientific and technical documents, but a thorough understanding of them is required if they are to be selected properly. Two types of data bases are described. The first ones cover different fields involved in hydrocarbon prospection and production: geology, geophysical prospecting, drilling, production and enhanced recovery, economics and current events, energy, environment. Then come data bases covering a specific type of document: patents, reports, theses, conference proceedings, standards and specifications, books, translations, citations. Descriptive data sheets give an inventory of the leading characteristics of the data bases described in each section.

  14. Design methodology for bio-based processing: Biodiesel and fatty alcohol production

    DEFF Research Database (Denmark)

    Simasatikul, Lida; Arpornwichanop, Amornchai; Gani, Rafiqul

    2012-01-01

    A systematic design methodology is developed for producing two main products plus side products starting with one or more bio-based renewable source. A superstructure that includes all possible reaction and separation operations is generated through thermodynamic insights and available data. The ....... Economic analysis and net present value are determined to find the best economically and operationally feasible process. The application of the methodology is presented through a case study involving biodiesel and fatty alcohol productions....

  15. Design methodology for bio-based processing: Biodiesel and fatty alcohol production

    DEFF Research Database (Denmark)

    Simasatikul, Lida; Arpornwichanopa, Amornchai; Gani, Rafiqul

    2013-01-01

    A systematic design methodology is developed for producing multiple main products plus side products starting with one or more bio-based renewable source. A superstructure that includes all possible reaction and separation operations is generated through thermodynamic insights and available data........ Economic analysis and net present value are determined to find the best economically and operationally feasible process. The application of the methodology is presented through a case study involving biodiesel and fatty alcohol productions....

  16. Production of JP-8-Based Hydrogen and Advanced Tactical Fuels for the U.S. Military

    Science.gov (United States)

    2009-09-24

    of methane. This is based on the approximate stoichiometry of anaerobic digestion . County-level estimates of manure production in Minnesota were made...wastes are manure generated by livestock including beef, dairy, horse, poultry, sheep, and swine . Although NASS does not collect animal waste data...and Processing Residues 4 Animal Wastes 6 Manure 6 Animal By-Products 7 Dedicated Energy Crops 8 Forest Products 10 Wood-Processing Residues 14

  17. Weather based risks and insurances for crop production in Belgium

    Science.gov (United States)

    Gobin, Anne

    2014-05-01

    Extreme weather events such as late frosts, droughts, heat waves and rain storms can have devastating effects on cropping systems. Damages due to extreme events are strongly dependent on crop type, crop stage, soil type and soil conditions. The perspective of rising risk-exposure is exacerbated further by limited aid received for agricultural damage, an overall reduction of direct income support to farmers and projected intensification of weather extremes with climate change. According to both the agriculture and finance sectors, a risk assessment of extreme weather events and their impact on cropping systems is needed. The impact of extreme weather events particularly during the sensitive periods of the farming calendar requires a modelling approach to capture the mixture of non-linear interactions between the crop, its environment and the occurrence of the meteorological event. The risk of soil moisture deficit increases towards harvesting, such that drought stress occurs in spring and summer. Conversely, waterlogging occurs mostly during early spring and autumn. Risks of temperature stress appear during winter and spring for chilling and during summer for heat. Since crop development is driven by thermal time and photoperiod, the regional crop model REGCROP (Gobin, 2010) enabled to examine the likely frequency, magnitude and impacts of frost, drought, heat stress and waterlogging in relation to the cropping season and crop sensitive stages. The risk profiles were subsequently confronted with yields, yield losses and insurance claims for different crops. Physically based crop models such as REGCROP assist in understanding the links between different factors causing crop damage as demonstrated for cropping systems in Belgium. Extreme weather events have already precipitated contraction of insurance coverage in some markets (e.g. hail insurance), and the process can be expected to continue if the losses or damages from such events increase in the future. Climate

  18. Operational forecast products and applications based on WRF/Chem

    Science.gov (United States)

    Hirtl, Marcus; Flandorfer, Claudia; Langer, Matthias; Mantovani, Simone; Olefs, Marc; Schellander-Gorgas, Theresa

    2015-04-01

    The responsibilities of the national weather service of Austria (ZAMG) include the support of the federal states and the public in questions connected to the protection of the environment in the frame of advisory and counseling services as well as expert opinions. The ZAMG conducts daily Air-Quality forecasts using the on-line coupled model WRF/Chem. The mother domain expands over Europe, North Africa and parts of Russia. The nested domain includes the alpine region and has a horizontal resolution of 4 km. Local emissions (Austria) are used in combination with European inventories (TNO and EMEP) for the simulations. The modeling system is presented and the results from the evaluation of the assimilation of pollutants using the 3D-VAR software GSI is shown. Currently observational data (PM10 and O3) from the Austrian Air-Quality network and from European stations (EEA) are assimilated into the model on an operational basis. In addition PM maps are produced using Aerosol Optical Thickness (AOT) observations from MODIS in combination with model data using machine learning techniques. The modeling system is operationally evaluated with different data sets. The emphasis of the application is on the forecast of pollutants which are compared to the hourly values (PM10, O3 and NO2) of the Austrian Air-Quality network. As the meteorological conditions are important for transport and chemical processes, some parameters like wind and precipitation are automatically evaluated (SAL diagrams, maps, …) with other models (e.g. ECMWF, AROME, …) and ground stations via web interface. The prediction of the AOT is also important for operators of solar power plants. In the past Numerical Weather Prediction (NWP) models were used to predict the AOT based on cloud forecasts at the ZAMG. These models do not consider the spatial and temporal variation of the aerosol distribution in the atmosphere with a consequent impact on the accuracy of forecasts especially during clear-sky days

  19. Traditional Turkish Fermented Cereal Based Products: Tarhana, Boza and Chickpea Bread

    Directory of Open Access Journals (Sweden)

    Hasan Tangüler

    2014-04-01

    Full Text Available Fermented products are one of the important foodstuffs in many countries of the world. People have gradually recognized the nutritional, functional and therapeutic value of these products and this has made them even more popular. Today, almost all consumers have a significant portion of their nutritional requirements fulfilled through these products. Scientific and technological knowledge is quite well developed for some fermented products such as wine, beer, cheese, and bread. These products are produced universally. However, scientific knowledge for some traditional foods produced locally in Turkey is still poor and not thorough. Numerous traditional, cereal-based fermented foods are produced in Turkey. The aim of this paper is to provide knowledge regarding the characterization, raw materials used for production, production methods, fermentation conditions and microorganisms which are effective in the fermentation of traditional foods. The study will focus on Boza, Tarhana, and Chickpea bread which are foods widely produced in Turkey.

  20. [Classification of cell-based medicinal products and legal implications: An overview and an update].

    Science.gov (United States)

    Scherer, Jürgen; Flory, Egbert

    2015-11-01

    In general, cell-based medicinal products do not represent a uniform class of medicinal products, but instead comprise medicinal products with diverse regulatory classification as advanced-therapy medicinal products (ATMP), medicinal products (MP), tissue preparations, or blood products. Due to the legal and scientific consequences of the development and approval of MPs, classification should be clarified as early as possible. This paper describes the legal situation in Germany and highlights specific criteria and concepts for classification, with a focus on, but not limited to, ATMPs and non-ATMPs. Depending on the stage of product development and the specific application submitted to a competent authority, legally binding classification is done by the German Länder Authorities, Paul-Ehrlich-Institut, or European Medicines Agency. On request by the applicants, the Committee for Advanced Therapies may issue scientific recommendations for classification.

  1. A framework for model-based optimization of bioprocesses under uncertainty: Lignocellulosic ethanol production case

    DEFF Research Database (Denmark)

    Morales Rodriguez, Ricardo; Meyer, Anne S.; Gernaey, Krist

    2012-01-01

    of up to 0.13 USD/gal-ethanol. Further stochastic optimization demonstrated the options for further reduction of the production costs with different processing configurations, reaching a reduction of up to 28% in the production cost in the SHCF configuration compared to the base case operation. Further...

  2. Why we need resilience thinking to meet societal challenges in bio-based production systems

    NARCIS (Netherlands)

    Ge, L.; Anten, N.P.R.; Dixhoorn, van I.D.E.; Feindt, P.H.; Kramer, K.; Leemans, H.B.J.; Gielen-Meuwissen, M.P.M.; Spoolder, H.A.M.; Sukkel, W.

    2016-01-01

    The need to feed an increasing world population and to
    respond to the effects of climate change creates
    unprecedented challenges for bio-based production systems.
    Many of these systems have been designed to maximize
    productivity and efficiency under standard

  3. DCT-Based Characterization of Milk Products Using Diffuse Reflectance Images

    DEFF Research Database (Denmark)

    Sharifzadeh, Sara; Skytte, Jacob Lercke; Clemmensen, Line Katrine Harder

    2013-01-01

    We propose to use the two-dimensional Discrete Cosine Transform (DCT) for decomposition of diffuse reflectance images of laser illumination on milk products in different wavelengths. Based on the prior knowledge about the characteristics of the images, the initial feature vectors are formed at ea...... discriminate milk from yogurt products better....

  4. Estimating and validating ground-based timber harvesting production through computer simulation

    Science.gov (United States)

    Jingxin Wang; Chris B. LeDoux

    2003-01-01

    Estimating ground-based timber harvesting systems production with an object oriented methodology was investigated. The estimation model developed generates stands of trees, simulates chain saw, drive-to-tree feller-buncher, swing-to-tree single-grip harvester felling, and grapple skidder and forwarder extraction activities, and analyzes costs and productivity. It also...

  5. Rice Production Vulnerability to Climate Change in Indonesia: An Overview on Community-based Adaptation

    Science.gov (United States)

    Komaladara, A. A. S. P.; Budiasa, I. W.; Ambarawati, I. G. A. A.

    2015-12-01

    Rice remains to be a major crop and staple food in Indonesia. The task to ensure that rice production meets the demand of a growing population continues to engage the attention of national planners and policy makers. However, the adverse effects of climate change on agriculture production have presented Indonesia with yet another significant challenge. The exposure of rice crops to climate-related hazards such as temperature stress, floods, and drought, may lead to lower yield and self-sufficiency rate. This study explores the vulnerability of rice production to the effects of climate change in Indonesia. Considering the vast geographical span of the country and varying exposure, sensitivity, and adaptive capacity to climate change at regional level, this study emphasize the importance of community-based adaptation. Results from a simulation based on production and climate data from 1984 to 2014 indicates that rice production is sensitive to variation in growing season temperature and precipitation. A projection of these climate factors in 2050 has a significant impact on the major rice crop. To manage the impact of climate change, this study turns to the potential roles of farmer organizations, such as Subak, in adaptation strategies. The Subak in Bali is recognized for its cultural and organizational framework that highlights the sharing of knowledge and local wisdom in rice production. This is demonstrated by its efficient community-based irrigation management system, leading to sustainable rice production. Keywords: rice production, climate change, community-based adaptation, Indonesia

  6. PRODUCT OPTIMIZATION METHOD BASED ON ANALYSIS OF OPTIMAL VALUES OF THEIR CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    Constantin D. STANESCU

    2016-05-01

    Full Text Available The paper presents an original method of optimizing products based on the analysis of optimal values of their characteristics . Optimization method comprises statistical model and analytical model . With this original method can easily and quickly obtain optimal product or material .

  7. Techno-economic assessment of the production of bio-based chemicals from glutamic acid

    NARCIS (Netherlands)

    Lammens, T.M.; Gangarapu, S.; Franssen, M.C.R.; Scott, E.L.; Sanders, J.P.M.

    2012-01-01

    In this review, possible process steps for the production of bio-based industrial chemicals from glutamic acid are described, including a techno-economic assessment of all processes. The products under investigation were those that were shown to be synthesized from glutamic acid on lab-scale, namely

  8. A watershed-based environmental and regulatory data analysis system for the forest products industry

    Science.gov (United States)

    John Beebe

    2012-01-01

    A watershed-based data analysis system was created as a tool for forest product companies to better understand potential implications from environmental regulations. Also known as the Receiving Water Database (RWDB), this data system was designed with the purpose of assisting companies that own pulp and paper mills, wood product facilities, and commercial timberlands...

  9. The National Biofuels Strategy - Importance of sustainable feedstock production systems in regional-based supply chains

    Science.gov (United States)

    Region-based production systems are needed to produce the feedstocks that will be turned into the biofuels required to meet Federal mandated targets. Executive and Legislative actions have put into motion significant government responses designed to advance the development and production of domestic...

  10. Enhanced protein and biochemical production using CRISPRi-based growth switches

    DEFF Research Database (Denmark)

    Li, Songyuan; Jendresen, Christian Bille; Grünberger, Alexander

    2016-01-01

    functionality of the growth switches. Decoupling of growth from production of biochemicals was demonstrated for mevalonate, a precursor for isoprenoid compounds. Mass yield of mevalonate was increased by 41%, and production was maintained for more than 45 h after activation of the pyrF-based growth switch...

  11. Pulmonary Toxicity of Perfluorinated Silane-Based Nanofilm Spray Products: Solvent Dependency

    DEFF Research Database (Denmark)

    Nørgaard, Asger Wisti; Hansen, Jitka S.; Sørli, Jorid Birkelund

    2014-01-01

    A number of cases of pulmonary injury by use of aerosolized surface coating products have been reported worldwide. The aerosol from a commercial alcohol-based nanofilm product (NFP) for coating of nonabsorbing surfaces was found to induce severe lung damage in a recent mouse bioassay. The NFP con...

  12. Information bias condemning radical food innovators? The case of insect-based products in the Netherlands

    NARCIS (Netherlands)

    Pascucci, S.; Magistris, de T.

    2013-01-01

    In this paper we analyze whether information bias is affecting consumers' WTP for radical food innovations. We collect data in the Netherlands on consumers' WTP for insect-based products. We used product attributes directly affected by information and EU legislation such as the visualization of

  13. NOAA JPSS Advanced Technology Microwave Sounder (ATMS)-based Tropical Cyclone (TC) Products from NDE

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The JPSS Microwave Sounder-based Tropical Cyclone (TC) Products provide estimates of tropical cyclone maximum wind speed, minimum sea level pressure, radii of 34,...

  14. A Firm Level Study of Information Technology Productivity in Europe Using Financial and Market Based Measures

    Directory of Open Access Journals (Sweden)

    Alan Peslak

    2004-05-01

    Full Text Available For many years, business has invested significant resources in information technology, hardware, software, and manpower. The Productivity Paradox is the seeming lack of productivity gains despite the increased investment in IT. For many years the existence of a Productivity Paradox has been the subject of research interest. Conflicting results have been obtained from a variety of data sets. Until this time however there has been no study that has investigated European companies’ use of information technology and its impact on productivity. The objective of this study was to investigate information technology productivity with a new data set from a European published source, and measuring productivity using both market and financial based measures. Results of the study indicated that information technology did have a consistent positive impact on firm level productivity in Europe for the years 1996, 1997, and 1998. Both market and financial based productivity measures provided consistent positive significant returns with regard to IT productivity. The major contribution of the study is that it provides an analysis of the impact of European information technology on firm and economic productivity.

  15. Productivity

    DEFF Research Database (Denmark)

    Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

    Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

  16. Metabolic engineering for the microbial production of isoprenoids: Carotenoids and isoprenoid-based biofuels

    Directory of Open Access Journals (Sweden)

    Fu-Xing Niu

    2017-09-01

    Full Text Available Isoprenoids are the most abundant and highly diverse group of natural products. Many isoprenoids have been used for pharmaceuticals, nutraceuticals, flavors, cosmetics, food additives and biofuels. Carotenoids and isoprenoid-based biofuels are two classes of important isoprenoids. These isoprenoids have been produced microbially through metabolic engineering and synthetic biology efforts. Herein, we briefly review the engineered biosynthetic pathways in well-characterized microbial systems for the production of carotenoids and several isoprenoid-based biofuels.

  17. Impact of Strategic Orientation Dimensions on New Product Development in Agro-based Nigerian Firms

    OpenAIRE

    Ibidunni Ayodotun Stephen; Falola Hezekiah Olubusayo

    2013-01-01

    This study explores the impact of strategic orientation dimensions on new product development capability of firms in the agro-business industry. The study based on questionnaires administered to selected agro-based firms in Lagos and Ogun states (Nigeria) utilized descriptive statistics, Pearson’s correlation to analyze the data obtained for the study. Results of data analysis showed that there exist positive relationship between strategic orientation dimensions and new product development. H...

  18. Finding Sales Promotion and Making Decision for New Product Based on Group Analysis of Edge-Enhanced Product Networks

    Science.gov (United States)

    Huang, Yi; Tan, Jianbin; Wu, Bin

    A novel method is proposed in this paper to find the promotive relationship of products from a network point of view. Firstly, a product network is built based on the dataset of handsets’ sale information collected from all outlets of a telecom operator of one province of China, with a period from Jan. 2006 to Jul. 2008. Then the edge enhanced model is applied on product network to divide all the products into several groups, according to which each outlet is assigned to class A or class B for a certain handset. Class A is defined as the outlet which sell the certain handset and contains all of handsets of its group, while other situation for class B which sell the certain handset too. It’s shown from the result of analysis on these two kinds of outlets that many handsets are sold better in outlets of class A than that of class B, even though the sales revenue of all these outlets in the time period is close. That is to say the handsets within a group would promote the sale for each other. Furthermore, a method proposed in this paper gives a way to find out the important attributes of the handsets which lead them to br divided into the same group, and it also explains how to add a new handset to an existing group and where would the new handset be sold best.

  19. Sustainability and meanings of farm-based bioenergy production in rural Finland

    Energy Technology Data Exchange (ETDEWEB)

    Huttunen, S.

    2013-06-01

    Rural bioenergy production has accrued interest in recent years. EU pressure for climate change abatement and energy political concerns regarding the availability of fossil fuels, have increased bioenergy production objectives in Finland. In addition, rural regions in Finland have encountered structural changes following EU inclusion, including an emergent interest in auxiliary production lines of which bioenergy production is an example. Local bioenergy production has the potential to increase rural sustainability and provide a model for sustainable rural development and energy production. Focusing on the recent emergence of small-scale farm-related bioenergy production: heat provision from wood fuels and biogas and biodiesel production, this study aims to discover if and how farm-based bioenergy production contributes to sustainable rural development. The study derives from the field of rural studies and evaluates sustainable rural development via the concepts of multifunctionality, embeddedness, ecological modernization and sustainable livelihoods, with a particular focus on social sustainability. The empirical portion of the study is comprised of thematic qualitative interviews of bioenergy producing farmers, and on newspaper and periodical article material. The results demonstrate how rural small-scale bioenergy production can have important positive developmental effects that ameliorate and sustain livelihoods in remote areas. This occurs via the multifunctional benefits of bioenergy production to the producers and local communities. The positive effects include social, economical and environmental aspects and rural bioenergy production can present traits of sustainable rural development, predominantly manifested in the social aspects of increased capabilities and reinforced social networks. There are, however, important differences between the examined production models. As an example of achieving sustainable rural development and livelihoods, heat

  20. Applications of gene-based technologies for improving animal production and health in developing countries

    International Nuclear Information System (INIS)

    Makkar, H.P.S.; Viljoen, G.J.

    2005-01-01

    This book provides a compilation of peer-reviewed scientific contributions from authoritative researchers attending an international symposium convened by the Animal Production and Health Sub-programme of the Animal Production and Health (APH), Joint FAO/IAEA Programme in cooperation with the Animal Production and Health Division of the FAO. These Proceedings contain invaluable information on the role and future potential of gene-based technologies for improving animal production and health, possible applications and constraints in the use of this technology in developing countries and their specific research needs

  1. The sustainability of cassava-based bioethanol production in southern Mali

    DEFF Research Database (Denmark)

    Rasmussen, Kjeld; Birch-Thomsen, Torben; Bruun, Thilde Bech

    2015-01-01

    of labour input. Analysis of the significance of current cassava production for food security shows that bioethanol production should be based on the attiéké variety of cassava, thereby avoiding interference with the important role of the bonouma in assuring food security in northern Mali. The key factor......The demand for biofuels has been rising, which has led developing countries to focus on production of feedstocks for biodiesel and bioethanol production. This has caused concerns for the impacts on food security, food prices and environmental sustainability. This paper examines a hypothetical case...

  2. O2O - Based Agricultural Products Supply Chain Process Integration Optimization Based on Internet +

    Directory of Open Access Journals (Sweden)

    Li Huijuan

    2017-01-01

    Full Text Available Traditional wholesale and retail, electricity supplier of agricultural products supply chain have many difficulties. The O2O supply chain of agricultural products of “Internet+”, committed to the integration of online and offline advantage process, has become the main direction of the agricultural products supply chain transformation. Practice operation results show that O2O supply chain can effectively play the advantages of online and offline process integration, but its further development is still subject to the logistics, information flow of the dispersion, fracture and high cost. The integrated optimization of various regions and various enterprises and all sectors of the supply chain process is the key to optimize the process Internet plus era of agricultural products supply chain.

  3. Guidelines for Risk-Based Changeover of Biopharma Multi-Product Facilities.

    Science.gov (United States)

    Lynch, Rob; Barabani, David; Bellorado, Kathy; Canisius, Peter; Heathcote, Doug; Johnson, Alan; Wyman, Ned; Parry, Derek Willison

    2018-01-01

    In multi-product biopharma facilities, the protection from product contamination due to the manufacture of multiple products simultaneously is paramount to assure product quality. To that end, the use of traditional changeover methods (elastomer change-out, full sampling, etc.) have been widely used within the industry and have been accepted by regulatory agencies. However, with the endorsement of Quality Risk Management (1), the use of risk-based approaches may be applied to assess and continuously improve established changeover processes. All processes, including changeover, can be improved with investment (money/resources), parallel activities, equipment design improvements, and standardization. However, processes can also be improved by eliminating waste. For product changeover, waste is any activity not needed for the new process or that does not provide added assurance of the quality of the subsequent product. The application of a risk-based approach to changeover aligns with the principles of Quality Risk Management. Through the use of risk assessments, the appropriate changeover controls can be identified and controlled to assure product quality is maintained. Likewise, the use of risk assessments and risk-based approaches may be used to improve operational efficiency, reduce waste, and permit concurrent manufacturing of products. © PDA, Inc. 2018.

  4. [Regulatory requirements regarding cell-based medicinal products for human and veterinary use - a comparison].

    Science.gov (United States)

    Kuhlmann-Gottke, Johanna; Duchow, Karin

    2015-11-01

    At present, there is no separate regulatory framework for cell-based medicinal products (CBMP) for veterinary use at the European or German level. Current European and national regulations exclusively apply to the corresponding medicinal products for human use. An increasing number of requests for the regulatory classification of CBMP for veterinary use, such as allogeneic stem cell preparations and dendritic cell-based autologous tumour vaccines, and a rise in scientific advice for companies developing these products, illustrate the need for adequate legislation. Currently, advice is given and decisions are made on a case-by-case basis regarding the regulatory classification and authorisation requirements.Since some of the CBMP - in particular in the area of stem-cell products - are developed in parallel for human and veterinary use, there is an urgent need to create specific legal definitions, regulations, and guidelines for these complex innovative products in the veterinary sector as well. Otherwise, there is a risk that that the current legal grey area regarding veterinary medicinal products will impede therapeutic innovations in the long run. A harmonised EU-wide approach is desirable. Currently the European legislation on veterinary medicinal products is under revision. In this context, veterinary therapeutics based on allogeneic cells and tissues will be defined and regulated. Certainly, the legal framework does not have to be as comprehensive as for human CBMP; a leaner solution is conceivable, similar to the special provisions for advanced-therapy medicinal products laid down in the German Medicines Act.

  5. FORMALIZING PRODUCT COST DISTORTION: The Impact of Volume-Related Allocation Bases on Cost Information

    Directory of Open Access Journals (Sweden)

    Johnny Jermias

    2003-09-01

    Full Text Available The purpose o f this study is to formally analyze product cost distortions resulting from the process of allocating costs to products based on Activity-Based Costing (ABC and the conventional product costing systems. The model developed in this paper rigorously shows the impact of treating costs that are not volume related as if they are. The model demonstrates that the source of product cost distortion is the difference between the proportion of driver used by each product in ABC and the proportion of the base used by the same product in the conventional costing systems. The difference arises because the conventional costing systems ignore the existence of batch-related and product-related costs. The model predicts a positive association between volume and size diversity with product cost distortions. When interaction between volume and size diversity exists, the distortion is either mitigated or exacerbated. The magnitude of the distortion is jointly determined by the size of the differences and the size of the total indirect costs.

  6. Adherence of preventive oral care products in the Syrian market to evidence-based international recommendations.

    Science.gov (United States)

    Habes, D; Mahzia, R; Nakhleh, K; Joury, E

    2016-09-25

    No study has investigated the availability and adherence of preventive oral care products on the Syrian market to evidence-based international recommendations. Data were collected in 2012, and updated in 2016, in terms of availability, characteristics and adherence to evidence-based international recommendations. Few preventive products adhered to the recommendations. Despite the large decrease in the number of oral care products on the Syrian market, due to the Syrian crisis, nonadherence of some of the available products is still present. A multisectorial approach at a policy level is needed to address such important limitations. The Syrian Ministry of Health should reform regulations for fluoride products to become subject to drug monitoring systems; the Syrian Arab Committee for Measurements and Standards needs to update its standards; and the Syrian General Dental Association should distribute a preventive booklet to dental practitioners.

  7. Investigation to biodiesel production by the two-step homogeneous base-catalyzed transesterification.

    Science.gov (United States)

    Ye, Jianchu; Tu, Song; Sha, Yong

    2010-10-01

    For the two-step transesterification biodiesel production made from the sunflower oil, based on the kinetics model of the homogeneous base-catalyzed transesterification and the liquid-liquid phase equilibrium of the transesterification product, the total methanol/oil mole ratio, the total reaction time, and the split ratios of methanol and reaction time between the two reactors in the stage of the two-step reaction are determined quantitatively. In consideration of the transesterification intermediate product, both the traditional distillation separation process and the improved separation process of the two-step reaction product are investigated in detail by means of the rigorous process simulation. In comparison with the traditional distillation process, the improved separation process of the two-step reaction product has distinct advantage in the energy duty and equipment requirement due to replacement of the costly methanol-biodiesel distillation column. Copyright 2010 Elsevier Ltd. All rights reserved.

  8. Quality transitivity and traceability system of herbal medicine products based on quality markers.

    Science.gov (United States)

    Liu, Changxiao; Guo, De-An; Liu, Liang

    2018-05-15

    Due to a variety of factors to affect the herb quality, the existing quality management model is unable to evaluate the process control. The development of the concept of "quality marker" (Q-marker) lays basis for establishing an independent process quality control system for herbal products. To ensure the highest degree of safety, effectiveness and quality process control of herbal products, it is aimed to establish a quality transitivity and traceability system of quality and process control from raw materials to finished herbal products. Based on the key issues and challenges of quality assessment, the current status of quality and process controls from raw materials to herbal medicinal products listed in Pharmacopoeia were analyzed and the research models including discovery and identification of Q-markers, analysis and quality management of risk evaluation were designed. Authors introduced a few new technologies and methodologies, such as DNA barcoding, chromatographic technologies, fingerprint analysis, chemical markers, bio-responses, risk management and solution for quality process control. The quality and process control models for herbal medicinal products were proposed and the transitivity and traceability system from raw materials to the finished products was constructed to improve the herbal quality from the entire supply and production chain. The transitivity and traceability system has been established based on quality markers, especially on how to control the production process under Good Engineering Practices, as well as to implement the risk management for quality and process control in herbal medicine production. Copyright © 2018 Elsevier GmbH. All rights reserved.

  9. Enhancing efficiency of production cost on seafood process with activity based management method

    Science.gov (United States)

    Tarigan, U.; Tarigan, U. P. P.

    2018-02-01

    The efficiency of production costs has an important impact maintaining company presence in the business world, as well as in the face of increasingly sharp global competition. It was done by identifying and reducing non-value-added activities to decrease production costs and increase profits. The study was conducted at a company engaged in the production of squid (seafood). It has a higher product price than the market as Rp 50,000 per kg while the market price of squid is only Rp 35,000 per kg. The price of the product to be more expensive compared with market price, and thereby a lot more consumers choose the lower market price. Based on the discussions conducted, the implementation of Activity Based Management was seen in the reduction of activities that are not added value in the production process. Since each activities consumers cost, the reduction of nonvalue-added activities has effects on the decline of production cost. The production’s decline costs mainly occur in the reduction of material transfer costs. The results showed that there was an increase after the improvement of 2.60%. Increased production cost efficiency causes decreased production costs and increased profits.

  10. Communication methods and production techniques in fixed prosthesis fabrication: a UK based survey. Part 2: Production techniques

    Science.gov (United States)

    Berry, J.; Nesbit, M.; Saberi, S.; Petridis, H.

    2014-01-01

    Aim The aim of this study was to identify the communication methods and production techniques used by dentists and dental technicians for the fabrication of fixed prostheses within the UK from the dental technicians' perspective. This second paper reports on the production techniques utilised. Materials and methods Seven hundred and eighty-two online questionnaires were distributed to the Dental Laboratories Association membership and included a broad range of topics, such as demographics, impression disinfection and suitability, and various production techniques. Settings were managed in order to ensure anonymity of respondents. Statistical analysis was undertaken to test the influence of various demographic variables such as the source of information, the location, and the size of the dental laboratory. Results The number of completed responses totalled 248 (32% response rate). Ninety percent of the respondents were based in England and the majority of dental laboratories were categorised as small sized (working with up to 25 dentists). Concerns were raised regarding inadequate disinfection protocols between dentists and dental laboratories and the poor quality of master impressions. Full arch plastic trays were the most popular impression tray used by dentists in the fabrication of crowns (61%) and bridgework (68%). The majority (89%) of jaw registration records were considered inaccurate. Forty-four percent of dental laboratories preferred using semi-adjustable articulators. Axial and occlusal under-preparation of abutment teeth was reported as an issue in about 25% of cases. Base metal alloy was the most (52%) commonly used alloy material. Metal-ceramic crowns were the most popular choice for anterior (69%) and posterior (70%) cases. The various factors considered did not have any statistically significant effect on the answers provided. The only notable exception was the fact that more methods of communicating the size and shape of crowns were utilised for

  11. A Value-Based Business Approach to Product Line Software Engineering

    Directory of Open Access Journals (Sweden)

    Raman K. Agrawalla

    2009-08-01

    Full Text Available The present conceptual paper is an attempt to provide a Value-Based Business Approach (VBBA to product line software engineering. It argues that Product line software engineering should be seen as a system and considered as a means towards the end of appropriating more and more value for the business firm; contingent upon the fact that it provides value to customer and customer's customers operating its value creating system with agility, speed, economy and innovation; getting governed by the positive sum value creation outlook and guided by value- based management. With our value-based business triad, the product line engineering process can hope to achieve simultaneously value, variety and volume, product differentiation and cost leadership enabling the business firm to land on the virtuous value spiral.

  12. Productive Love Promotion Via Affective Technology: An Approach Based On Social Psychology And Philosophy

    Directory of Open Access Journals (Sweden)

    Ramon Solves Pujol

    2010-01-01

    Full Text Available This paper proposes the use of social psychological and philosophical foundations for designing affective technology that promotes the experience of love. The adopted theoretical basis is the concept of productive love, which is heavily based on Enrich Fromm but also includes theories and scientific findings of numerous psychoanalysts, social psychologists, and philosophers. We conducted a review of the theory about the nature of love and found that social psychological and philosophical approaches differ regarding peoples' understandings. The findings were used to elaborate eight principles of productive love. Based on these principles, we derived criteria for designing affective technology when the objective is to promote productive love. We reviewed the existent studies on affective technologies and implemented the criteria into a system design, the Pictures' Call. A prototype of the system was pretested to illustrate how productive love technology could be based on established criteria.

  13. Identity-based estimation of greenhouse gas emissions from crop production

    DEFF Research Database (Denmark)

    Bennetzen, Eskild Hohlmann; Smith, Pete; Soussana, Jean-Francois

    2012-01-01

    reduction of emissions i.e. reducing emissions per unit of agricultural product rather than the absolute emissions per se. Hence the system productivity must be included in the same analysis. This paper presents the Kaya- Porter identity, derived from the Kaya identity, as a new way to calculate GHG...... (ha). These separate elements in the identity can be targeted in emissions reduction and mitigation policies and are useful to analyse past and current trends in emissions and to explore future scenarios. Using the Kaya-Porter identity we have performed a case study on Danish crop production and find...... emissions to have been reduced by 12% from 1992 to 2008, whilst yields per unit area have remained constant. Both land-based emissions and energy-based emissions have decreased, mainly due to a 41% reduction in nitrogen fertilizer use. The initial identity based analysis for crop production presented here...

  14. Energy analysis of hydrogen and electricity production from aluminum-based processes

    International Nuclear Information System (INIS)

    Wang, Huizhi; Leung, Dennis Y.C.; Leung, Michael K.H.

    2012-01-01

    The aluminum energy conversion processes have been characterized to be carbon-free and sustainable. However, their applications are restrained by aluminum production capacity as aluminum is never found as a free metal on the earth. This study gives an assessment of typical aluminum-based energy processes in terms of overall energy efficiency and cost. Moreover, characteristics associated with different processes are identified. Results in this study indicate the route from which aluminum is produced can be a key factor in determining the efficiency and costs. Besides, the aluminum–air battery provides a more energy-efficient manner for the conversion of energy stored in primary aluminum and recovered aluminum from products compared to aluminum-based hydrogen production, whereas the aluminum-based hydrogen production gives a more energy-efficient way of utilizing energy stored in secondary aluminum or even scrap aluminum.

  15. The Production Measurement Model of Open Pit Mine Based on Truck Operation Diagram

    Directory of Open Access Journals (Sweden)

    Sun Xiao-Yu

    2016-01-01

    Full Text Available Conventional production measurement of truck dispatching system in open pit mine has not been effectively expressed by a mathematical model, which brings a negative effect on the subsequent data mining and a compatibility issue to apply the production measurement with fixed assignment of truck. In this study, based on the proposed concept that truck is not only the carrier of transport material, but also act as the bridges and linkages between the loading sites and the unloading sites, a new truck operation diagram was established, which was further developed to a basic data matrix and a production measurement model. The new model allowed to calculatethe production measurement of the transport, loading, unloading, material and etc, respectively, as well as with any calculation in combination of more than one factor as needed.It solved the compatibility issue between conventional production measurement and the production measurement of fixed assignment of truck with good practical results.

  16. Fluvial facies reservoir productivity prediction method based on principal component analysis and artificial neural network

    Directory of Open Access Journals (Sweden)

    Pengyu Gao

    2016-03-01

    Full Text Available It is difficult to forecast the well productivity because of the complexity of vertical and horizontal developments in fluvial facies reservoir. This paper proposes a method based on Principal Component Analysis and Artificial Neural Network to predict well productivity of fluvial facies reservoir. The method summarizes the statistical reservoir factors and engineering factors that affect the well productivity, extracts information by applying the principal component analysis method and approximates arbitrary functions of the neural network to realize an accurate and efficient prediction on the fluvial facies reservoir well productivity. This method provides an effective way for forecasting the productivity of fluvial facies reservoir which is affected by multi-factors and complex mechanism. The study result shows that this method is a practical, effective, accurate and indirect productivity forecast method and is suitable for field application.

  17. Analysis of the Main Factors Influencing Food Production in China Based on Time Series Trend Chart

    Institute of Scientific and Technical Information of China (English)

    Shuangjin; WANG; Jianying; LI

    2014-01-01

    Based on the annual sample data on food production in China since the reform and opening up,we select 8 main factors influencing the total food production( growing area,application rate of chemical fertilizer,effective irrigation area,the affected area,total machinery power,food production cost index,food production price index,financial funds for supporting agriculture,farmers and countryside),and put them into categories of material input,resources and environment,and policy factors. Using the factor analysis,we carry out the multi-angle analysis of these typical influencing factors one by one through the time series trend chart. It is found that application rate of chemical fertilizer,the growing area of food crops and drought-affected area become the key factors affecting food production. On this basis,we set forth the corresponding recommendations for improving the comprehensive food production capacity.

  18. Productivity losses in chronic obstructive pulmonary disease: a population-based survey.

    Science.gov (United States)

    Erdal, Marta; Johannessen, Ane; Askildsen, Jan Erik; Eagan, Tomas; Gulsvik, Amund; Grønseth, Rune

    2014-01-01

    We aimed to estimate incremental productivity losses (sick leave and disability) of spirometry-defined chronic obstructive pulmonary disease (COPD) in a population-based sample and in hospital-recruited patients with COPD. Furthermore, we examined predictors of productivity losses by multivariate analyses. We performed four quarterly telephone interviews of 53 and 107 population-based patients with COPD and controls, as well as 102 hospital-recruited patients with COPD below retirement age. Information was gathered regarding annual productivity loss, exacerbations of respiratory symptoms and comorbidities. Incremental productivity losses were estimated by multivariate quantile median regression according to the human capital approach, adjusting for sex, age, smoking habits, education and lung function. Main effect variables were COPD/control status, number of comorbidities and exacerbations of respiratory symptoms. Altogether 55%, 87% and 31% of population-based COPD cases, controls and hospital patients, respectively, had a paid job at baseline. The annual incremental productivity losses were 5.8 (95% CI 1.4 to 10.1) and 330.6 (95% CI 327.8 to 333.3) days, comparing population-recruited and hospital-recruited patients with COPD to controls, respectively. There were significantly higher productivity losses associated with female sex and less education. Additional adjustments for comorbidities, exacerbations and FEV1% predicted explained all productivity losses in the population-based sample, as well as nearly 40% of the productivity losses in hospital-recruited patients. Annual incremental productivity losses were more than 50 times higher in hospital-recruited patients with COPD than that of population-recruited patients with COPD. To ensure a precise estimation of societal burden, studies on patients with COPD should be population-based.

  19. Sensitivity of Distributed Hydrologic Simulations to Ground and Satellite Based Rainfall Products

    Directory of Open Access Journals (Sweden)

    Singaiah Chintalapudi

    2014-05-01

    Full Text Available In this study, seven precipitation products (rain gauges, NEXRAD MPE, PERSIANN 0.25 degree, PERSIANN CCS-3hr, PERSIANN CCS-1hr, TRMM 3B42V7, and CMORPH were used to force a physically-based distributed hydrologic model. The model was driven by these products to simulate the hydrologic response of a 1232 km2 watershed in the Guadalupe River basin, Texas. Storm events in 2007 were used to analyze the precipitation products. Comparison with rain gauge observations reveals that there were significant biases in the satellite rainfall products and large variations in the estimated amounts. The radar basin average precipitation compared very well with the rain gauge product while the gauge-adjusted TRMM 3B42V7 precipitation compared best with observed rainfall among all satellite precipitation products. The NEXRAD MPE simulated streamflows matched the observed ones the best yielding the highest Nash-Sutcliffe Efficiency correlation coefficient values for both the July and August 2007 events. Simulations driven by TRMM 3B42V7 matched the observed streamflow better than other satellite products for both events. The PERSIANN coarse resolution product yielded better runoff results than the higher resolution product. The study reveals that satellite rainfall products are viable alternatives when rain gauge or ground radar observations are sparse or non-existent.

  20. Description of historical crop calendar data bases developed to support foreign commodity production forecasting project experiments

    Science.gov (United States)

    West, W. L., III (Principal Investigator)

    1981-01-01

    The content, format, and storage of data bases developed for the Foreign Commodity Production Forecasting project and used to produce normal crop calendars are described. In addition, the data bases may be used for agricultural meteorology, modeling of stage sequences and planting dates, and as indicators of possible drought and famine.

  1. A model-based systems approach to pharmaceutical product-process design and analysis

    DEFF Research Database (Denmark)

    Gernaey, Krist; Gani, Rafiqul

    2010-01-01

    This is a perspective paper highlighting the need for systematic model-based design and analysis in pharmaceutical product-process development. A model-based framework is presented and the role, development and use of models of various types are discussed together with the structure of the models...

  2. Productivity in public welfare services is changing: the standpoint of strategic competence-based management.

    Science.gov (United States)

    Ollila, Seija

    2013-01-01

    In Finland the municipal restructuring project was launched in 2005. Its goal is to create a system that ensures high-quality municipal welfare services for everyone, continuing into the future. The main focus of this research is to examine the tension between strategic competence-based management and productivity in public welfare services. The theoretical basis covers theories regarding strategic competence-based management and productivity. To guarantee services and quality it is important to strengthen the supply of employees, competence, development, leverage, and benefits in public organizations. Leadership has a significant role in strategic competence-based management.

  3. Opportunities for Bio-Based Solvents Created as Petrochemical and Fuel Products Transition towards Renewable Resources.

    Science.gov (United States)

    Clark, James H; Farmer, Thomas J; Hunt, Andrew J; Sherwood, James

    2015-07-28

    The global bio-based chemical market is growing in size and importance. Bio-based solvents such as glycerol and 2-methyltetrahydrofuran are often discussed as important introductions to the conventional repertoire of solvents. However adoption of new innovations by industry is typically slow. Therefore it might be anticipated that neoteric solvent systems (e.g., ionic liquids) will remain niche, while renewable routes to historically established solvents will continue to grow in importance. This review discusses bio-based solvents from the perspective of their production, identifying suitable feedstocks, platform molecules, and relevant product streams for the sustainable manufacturing of conventional solvents.

  4. Product qualification: a barrier to point-of-care microfluidic-based diagnostics?

    Science.gov (United States)

    Tantra, Ratna; van Heeren, Henne

    2013-06-21

    One of the most exciting applications of microfluidics-based diagnostics is its potential use in next generation point-of-care (POC) devices. Many prototypes are already in existence, but, as of yet, few have achieved commercialisation. In this article, we consider the issue surrounding product qualification as a potential barrier to market success. The study discusses, in the context of POC microfluidics-based diagnostics, what the generic issues are and potential solutions. Our findings underline the need for a community-based effort that is necessary to speed up the product qualification process.

  5. Opportunities for Bio-Based Solvents Created as Petrochemical and Fuel Products Transition towards Renewable Resources

    Science.gov (United States)

    Clark, James H.; Farmer, Thomas J.; Hunt, Andrew J.; Sherwood, James

    2015-01-01

    The global bio-based chemical market is growing in size and importance. Bio-based solvents such as glycerol and 2-methyltetrahydrofuran are often discussed as important introductions to the conventional repertoire of solvents. However adoption of new innovations by industry is typically slow. Therefore it might be anticipated that neoteric solvent systems (e.g., ionic liquids) will remain niche, while renewable routes to historically established solvents will continue to grow in importance. This review discusses bio-based solvents from the perspective of their production, identifying suitable feedstocks, platform molecules, and relevant product streams for the sustainable manufacturing of conventional solvents. PMID:26225963

  6. A novel multimodal chromatography based single step purification process for efficient manufacturing of an E. coli based biotherapeutic protein product.

    Science.gov (United States)

    Bhambure, Rahul; Gupta, Darpan; Rathore, Anurag S

    2013-11-01

    Methionine oxidized, reduced and fMet forms of a native recombinant protein product are often the critical product variants which are associated with proteins expressed as bacterial inclusion bodies in E. coli. Such product variants differ from native protein in their structural and functional aspects, and may lead to loss of biological activity and immunogenic response in patients. This investigation focuses on evaluation of multimodal chromatography for selective removal of these product variants using recombinant human granulocyte colony stimulating factor (GCSF) as the model protein. Unique selectivity in separation of closely related product variants was obtained using combined pH and salt based elution gradients in hydrophobic charge induction chromatography. Simultaneous removal of process related impurities was also achieved in flow-through leading to single step purification process for the GCSF. Results indicate that the product recovery of up to 90.0% can be obtained with purity levels of greater than 99.0%. Binding the target protein at pHproduct variants using the combined pH and salt based elution gradient and removal of the host cell impurities in flow-through are the key novel features of the developed multimodal chromatographic purification step. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Body of Cultural Tourism in Turkey and Need of Product Differentiation Based On Tangible Cultural Assets

    Directory of Open Access Journals (Sweden)

    Bilgehan Gülcan

    2010-03-01

    Full Text Available Although Turkey has started its tourism journey with cultural tourism, after 1980’s sea, sand, sun based and entertainment dominant torism approach has developed. Nowadays, more than half of the foreign tourists come to Turkey for the above purpose. Keeping in mind the cultural assets of Turkey, cultural tourism is often pronounced to be the best candidate to diversify the tourism, but only 6% of the overall foreign tourists visit Turkey for cultural purposes. On the other hand, this ratio has a tendency to decrease year by year. In this paper which has been generated using secondary data, the problems faced in the progress of cultural tourism in Turkey has been identified and discussed. First problem is idenfied being the all-inclusive type accommodation, and the latter one is identified as being the body of the product in cultural tourism which is taken as the focus of this study. According to the results, Turkey’s cultural tourism product is especially based on tangible cultural assets, but this product shows strong dependancy on both geographical and some particular historical periods. In addition, it is identified that existing character of the products has not been changed for a long time and as a result has disadvantages in competitiveness. Thus it has been shown that, differentation is needed in tangible culture based product. In this context, some alternatives for product differentiation oppotunities for product developers are also advised.

  8. A Bayesian Network Based Adaptability Design of Product Structures for Function Evolution

    Directory of Open Access Journals (Sweden)

    Shaobo Li

    2018-03-01

    Full Text Available Structure adaptability design is critical for function evolution in product families, in which many structural and functional design factors are intertwined together with manufacturing cost, customer satisfaction, and final market sales. How to achieve a delicate balance among all of these factors to maximize the market performance of the product is too complicated to address based on traditional domain experts’ knowledge or some ad hoc heuristics. Here, we propose a quantitative product evolution design model that is based on Bayesian networks to model the dynamic relationship between customer needs and product structure design. In our model, all of the structural or functional features along with customer satisfaction, manufacturing cost, sale price, market sales, and indirect factors are modeled as random variables denoted as nodes in the Bayesian networks. The structure of the Bayesian model is then determined based on the historical data, which captures the dynamic sophisticated relationship of customer demands of a product, structural design, and market performance. Application of our approach to an electric toothbrush product family evolution design problem shows that our model allows for designers to interrogate with the model and obtain theoretical and decision support for dynamic product feature design process.

  9. Research on knowledge support technology for product innovation design based on quality function knowledge deployment

    Directory of Open Access Journals (Sweden)

    Kai Zhang

    2016-06-01

    Full Text Available Based on the analysis of the relationship between the process of product innovation design and knowledge, this article proposes a theoretical model of quality function knowledge deployment. In order to link up the product innovation design and the knowledge required by the designer, the iterative method of quality function knowledge deployment is refined, as well as the knowledge retrieval model and knowledge support model based on quality function knowledge deployment are established. In the whole life cycle of product design, in view of the different requirements for knowledge in conceptual design stage, components’ configuration stage, process planning stage, and production planning stage, the quality function knowledge deployment model could link up the required knowledge with the engineering characteristics, component characteristics, process characteristics, and production characteristics in the four stages using the mapping relationship between the function characteristics and the knowledge and help the designer to track the required knowledge for realizing product innovation design. In this article, an instance about rewinding machine is given to demonstrate the practicability and validity of product innovation design knowledge support technology based on quality function knowledge deployment.

  10.  Optimizing relational algebra operations using discrimination-based joins and lazy products

    DEFF Research Database (Denmark)

    Henglein, Fritz

    We show how to implement in-memory execution of the core re- lational algebra operations of projection, selection and cross-product eciently, using discrimination-based joins and lazy products. We introduce the notion of (partitioning) discriminator, which par- titions a list of values according...... to a specied equivalence relation on keys the values are associated with. We show how discriminators can be dened generically, purely functionally, and eciently (worst-case linear time) on top of the array-based basic multiset discrimination algorithm of Cai and Paige (1995). Discriminators provide the basis...... the selection operation to recognize on the y whenever it is applied to a cross-product, in which case it can choose an ecient discrimination-based equijoin implementation. The techniques subsume most of the optimization techniques based on relational algebra equalities, without need for a query preprocessing...

  11. Reengineering a PC-based System into the Mobile Device Product Line

    DEFF Research Database (Denmark)

    Zhang, Weishan; Jarzabek, Stanislaw; Loughran, Neil

    2003-01-01

    There is a growing demand to port existing PC-based software systems to mobile device platforms. Systems running on mobile devices share basic characteristics with their PC-based counterparts, but differ from them in details of user interfaces, application models, etc. Systems running on mobile...... devices must also perform well using less memory than PC-based systems. Mobile devices themselves are different from each other in many ways, too. We describe how we made an existing PC-based City Guide System available on a wide range of mobile devices, in a cost-effective way. We applied "reengineering...... into a product line architecture" approach to achieve the goal. Our product line architecture facilitates reuse via generation. We generate specific City Guide Systems for target platforms including PC, Pocket PC and other mobile devices, from generic meta-components that form the City Guide System product line...

  12. Proposition Analysis of Fixed Broadband Services Based on Product Segmentation And Purchasing Power of Urban Society

    Directory of Open Access Journals (Sweden)

    Triyono Budi Santoso

    2016-03-01

    Full Text Available Tight competition in the broadband industry has forced the provider to have a good product propotition and strategy in the market, including market segmentation and type of services delivered based on customer’s expextation and intention to buy. This research aims to make a product proposition based on two major criteries in fixed broadband service, which are speed and price of the product, by looking into the competition in existing market (competitor’s product. As many players in Indonesia have created very tight situation, the will be launched product should have an attractive matter or differentiation in order to compete and get a “buy in” of the customer. In the research, some analysis was conducted across all the propositions by spreading questionnaires to respondents in urban area especially in Jakarta and Bandung, thus the provider can create product with an appropriate specifications to answer the needs of customers on their affordable price to buy. Some close-ended questions in the questionairres were scaled and performed by basic statistical approach methods. The result shows that product with affordable price is still become the choice of respondents in each segment (low, medium and high income. Price list per speed which is fitted to any segments is also suggested in this research. The result of the research can also be used to develop the product as a differentiation to be the choices and preferencesof customers.

  13. Aspergillus oryzae-based cell factory for direct kojic acid production from cellulose.

    Science.gov (United States)

    Yamada, Ryosuke; Yoshie, Toshihide; Wakai, Satoshi; Asai-Nakashima, Nanami; Okazaki, Fumiyoshi; Ogino, Chiaki; Hisada, Hiromoto; Tsutsumi, Hiroko; Hata, Yoji; Kondo, Akihiko

    2014-05-18

    Kojic acid (5-Hydroxy-2-(hydroxymethyl)-4-pyrone) is one of the major secondary metabolites in Aspergillus oryzae. It is widely used in food, pharmaceuticals, and cosmetics. The production cost, however, is too high for its use in many applications. Thus, an efficient and cost-effective kojic acid production process would be valuable. However, little is known about the complete set of genes for kojic acid production. Currently, kojic acid is produced from glucose. The efficient production of kojic acid using cellulose as an inexpensive substrate would help establish cost-effective kojic acid production. A kojic acid transcription factor gene over-expressing the A. oryzae strain was constructed. Three genes related to kojic acid production in this strain were transcribed in higher amounts than those found in the wild-type strain. This strain produced 26.4 g/L kojic acid from 80 g/L glucose. Furthermore, this strain was transformed with plasmid harboring 3 cellulase genes. The resultant A. oryzae strain successfully produced 0.18 g/L of kojic acid in 6 days of fermentation from the phosphoric acid swollen cellulose. Kojic acid was produced directly from cellulose material using genetically engineered A. oryzae. Because A. oryzae has efficient protein secretion ability and secondary metabolite productivity, an A. oryzae-based cell factory could be a platform for the production of various kinds of bio-based chemicals.

  14. Does body size of dairy cows, at constant ratio of maintenance to production requirements, affect productivity in a pasture-based production system?

    Science.gov (United States)

    Hofstetter, P; Steiger Burgos, M; Petermann, R; Münger, A; Blum, J W; Thomet, P; Menzi, H; Kohler, S; Kunz, P

    2011-12-01

    This study compared productivity of dairy cows with different body weight (BW), but a constant ratio of maintenance to production requirements in their first lactation, in a pasture-based production system with spring calving. Two herds, Herd L (13 and 14 large cows in 2003 and 2004 respectively; average BW after calving, 721 kg) and Herd S (16 small cows in both years; 606 kg) [Correction added after online publication 14 January 2011: 16 small cows in both years; 621 kg was changed to 16 small cows in both years; 606 kg], all in their second or following lactations, were each allocated 6 ha of pasture and rotationally grazed on 10 parallel paddocks with equal herbage offer and nutritional values. Winter hay, harvested from the same pastures, was offered ad libitum in the indoor periods in a tied stall barn. Each herd received, per lactation and year, approximately 2000 kg dry matter (DM) of concentrates and of fodder beets, equally distributed to every individual. Indoors, the L-cows ingested more DM than the S-cows (18.7 vs. 16.3 kg DM/cow per day; p pasture (17.9 vs. 15.5 kg DM/cow per day; p dairy cow types were equally efficient in utilising pasture-based forage. © 2010 Blackwell Verlag GmbH.

  15. Base Stock Policy in a Join-Type Production Line with Advanced Demand Information

    Science.gov (United States)

    Hiraiwa, Mikihiko; Tsubouchi, Satoshi; Nakade, Koichi

    Production control such as the base stock policy, the kanban policy and the constant work-in-process policy in a serial production line has been studied by many researchers. Production lines, however, usually have fork-type, join-type or network-type figures. In addition, in most previous studies on production control, a finished product is required at the same time as arrival of demand at the system. Demand information is, however, informed before due date in practice. In this paper a join-type (assembly) production line under base stock control with advanced demand information in discrete time is analyzed. The recursive equations for the work-in-process are derived. The heuristic algorithm for finding appropriate base stock levels of all machines at short time is proposed and the effect of advanced demand information is examined by simulation with the proposed algorithm. It is shown that the inventory cost can decreases with little backlogs by using the appropriate amount of demand information and setting appropriate base stock levels.

  16. Water Footprints of Cassava- and Molasses-Based Ethanol Production in Thailand

    International Nuclear Information System (INIS)

    Mangmeechai, Aweewan; Pavasant, Prasert

    2013-01-01

    The Thai government has been promoting renewable energy as well as stimulating the consumption of its products. Replacing transport fuels with bioethanol will require substantial amounts of water and enhance water competition locally. This study shows that the water footprint (WF) of molasses-based ethanol is less than that of cassava-based ethanol. The WF of molasses-based ethanol is estimated to be in the range of 1,510–1,990 L water/L ethanol, while that of cassava-based ethanol is estimated at 2,300–2,820 L water/L ethanol. Approximately 99% of the water in each of these WFs is used to cultivate crops. Ethanol production requires not only substantial amounts of water but also government interventions because it is not cost competitive. In Thailand, the government has exploited several strategies to lower ethanol prices such as oil tax exemptions for consumers, cost compensation for ethanol producers, and crop price assurances for farmers. For the renewable energy policy to succeed in the long run, the government may want to consider promoting molasses-based ethanol production as well as irrigation system improvements and sugarcane yield-enhancing practices, since molasses-based ethanol is more favorable than cassava-based ethanol in terms of its water consumption, chemical fertilizer use, and production costs

  17. Water Footprints of Cassava- and Molasses-Based Ethanol Production in Thailand

    Energy Technology Data Exchange (ETDEWEB)

    Mangmeechai, Aweewan, E-mail: aweewan.m@nida.ac.th [National Institute of Development Administration, International College (Major in Public Policy and Management) (Thailand); Pavasant, Prasert [Chulalongkorn University, Department of Chemical Engineering, Faculty of Engineering (Thailand)

    2013-12-15

    The Thai government has been promoting renewable energy as well as stimulating the consumption of its products. Replacing transport fuels with bioethanol will require substantial amounts of water and enhance water competition locally. This study shows that the water footprint (WF) of molasses-based ethanol is less than that of cassava-based ethanol. The WF of molasses-based ethanol is estimated to be in the range of 1,510-1,990 L water/L ethanol, while that of cassava-based ethanol is estimated at 2,300-2,820 L water/L ethanol. Approximately 99% of the water in each of these WFs is used to cultivate crops. Ethanol production requires not only substantial amounts of water but also government interventions because it is not cost competitive. In Thailand, the government has exploited several strategies to lower ethanol prices such as oil tax exemptions for consumers, cost compensation for ethanol producers, and crop price assurances for farmers. For the renewable energy policy to succeed in the long run, the government may want to consider promoting molasses-based ethanol production as well as irrigation system improvements and sugarcane yield-enhancing practices, since molasses-based ethanol is more favorable than cassava-based ethanol in terms of its water consumption, chemical fertilizer use, and production costs.

  18. When the asymptotic limit offers no advantage in the local-operations-and-classical-communication paradigm

    Science.gov (United States)

    Fu, Honghao; Leung, Debbie; Mančinska, Laura

    2014-05-01

    We consider bipartite LOCC, the class of operations implementable by local quantum operations and classical communication between two parties. Surprisingly, there are operations that can be approximated to arbitrary precision but are impossible to implement exactly if only a finite number of messages are exchanged. This significantly complicates the analysis of what can or cannot be approximated with LOCC. Toward alleviating this problem, we exhibit two scenarios in which allowing vanishing error does not help. The first scenario is implementation of projective measurements with product measurement operators. The second scenario is the discrimination of unextendable product bases on two three-dimensional systems.

  19. A structure-based approach to evaluation product adaptability in adaptable design

    International Nuclear Information System (INIS)

    Cheng, Qiang; Liu, Zhifeng; Cai, Ligang; Zhang, Guojun; Gu, Peihua

    2011-01-01

    Adaptable design, as a new design paradigm, involves creating designs and products that can be easily changed to satisfy different requirements. In this paper, two types of product adaptability are proposed as essential adaptability and behavioral adaptability, and through measuring which respectively a model for product adaptability evaluation is developed. The essential adaptability evaluation proceeds with analyzing the independencies of function requirements and function modules firstly based on axiomatic design, and measuring the adaptability of interfaces secondly with three indices. The behavioral adaptability reflected by the performance of adaptable requirements after adaptation is measured based on Kano model. At last, the effectiveness of the proposed method is demonstrated by an illustrative example of the motherboard of a personal computer. The results show that the method can evaluate and reveal the adaptability of a product in essence, and is of directive significance to improving design and innovative design

  20. Consumer preferences and demand for insect-based food products in developing countries

    DEFF Research Database (Denmark)

    Alemu, Mohammed Hussen

    2017-01-01

    in developing countries. Due to these benefits, stakeholders in the food sector have recently focused on establishing the insect production sector. Nevertheless, there are a number of issues that need to be investigated before the production is fully optimized. This thesis investigates consumer demand in terms...... of consumers' preferences and willingness-topay (WTP) for insect-based food products in Kenya. It does this by focusing on the association of consumers' psychological orientations, contextual attributes, tasting experience and peer influence with consumers' choice behavior. A further focus is an investigation...... of the impacts of value elicitation methods in terms of hypothetical and nonhypothetical market scenarios on consumers' WTP for the insect-based food products. Discrete choice experiments (DCEs) are employed to collect data in field settings. The data is then analyzed using the state-of-the-art choice modeling...

  1. Lignocellulosic ethanol production by starch-base industrial yeast under PEG detoxification

    Science.gov (United States)

    Liu, Xiumei; Xu, Wenjuan; Mao, Liaoyuan; Zhang, Chao; Yan, Peifang; Xu, Zhanwei; Zhang, Z. Conrad

    2016-02-01

    Cellulosic ethanol production from lignocellulosic biomass offers a sustainable solution for transition from fossil based fuels to renewable alternatives. However, a few long-standing technical challenges remain to be addressed in the development of an economically viable fermentation process from lignocellulose. Such challenges include the needs to improve yeast tolerance to toxic inhibitory compounds and to achieve high fermentation efficiency with minimum detoxification steps after a simple biomass pretreatment. Here we report an in-situ detoxification strategy by PEG exo-protection of an industrial dry yeast (starch-base). The exo-protected yeast cells displayed remarkably boosted vitality with high tolerance to toxic inhibitory compounds, and with largely improved ethanol productivity from crude hydrolysate derived from a pretreated lignocellulose. The PEG chemical exo-protection makes the industrial S. cerevisiae yeast directly applicable for the production of cellulosic ethanol with substantially improved productivity and yield, without of the need to use genetically modified microorganisms.

  2. Towards product design automation based on parameterized standard model with diversiform knowledge

    Science.gov (United States)

    Liu, Wei; Zhang, Xiaobing

    2017-04-01

    Product standardization based on CAD software is an effective way to improve design efficiency. In the past, research and development on standardization mainly focused on the level of component, and the standardization of the entire product as a whole is rarely taken into consideration. In this paper, the size and structure of 3D product models are both driven by the Excel datasheets, based on which a parameterized model library is therefore established. Diversiform knowledge including associated parameters and default properties are embedded into the templates in advance to simplify their reuse. Through the simple operation, we can obtain the correct product with the finished 3D models including single parts or complex assemblies. Two examples are illustrated later to invalid the idea, which will greatly improve the design efficiency.

  3. Sustainable Rent-Based Closed-Loop Supply Chain for Fashion Products

    Directory of Open Access Journals (Sweden)

    Zhi-Hua Hu

    2014-10-01

    Full Text Available The textile and clothing industry generates much pollution and consumes a large amount of resources. Improper uses and disposal of clothing products make the problems much more severe. Fast fashion products shorten the valid lifecycle and generate more waste than regular clothing products. Considering the features of fashion products, a system of a rent-based closed-loop supply chain is developed to improve the sustainability of fashion products. The supply chain processes (fashion design and manufacturing, laundry, logistics and disposal, the operations management issues (inventory management, closed-loop logistics, human-clothing matching, booking system and the rental pricing and the sustainability promotion aspects (customization, responsive system, culture and policy aspects are investigated by devising sustainable strategies. The rationalities of the developed system and strategies are reviewed and elucidated in detail. The results may contribute to building sustainable closed-loop fashion supply chains, the related information systems and operational and managerial mechanisms.

  4. Downstream processing and chromatography based analytical methods for production of vaccines, gene therapy vectors, and bacteriophages

    Science.gov (United States)

    Kramberger, Petra; Urbas, Lidija; Štrancar, Aleš

    2015-01-01

    Downstream processing of nanoplexes (viruses, virus-like particles, bacteriophages) is characterized by complexity of the starting material, number of purification methods to choose from, regulations that are setting the frame for the final product and analytical methods for upstream and downstream monitoring. This review gives an overview on the nanoplex downstream challenges and chromatography based analytical methods for efficient monitoring of the nanoplex production. PMID:25751122

  5. An Empirical Study on the Moderate Scale of Food-production-based Family Farm in Guangxi

    Institute of Scientific and Technical Information of China (English)

    Yaogui WU

    2016-01-01

    The moderate scale family farm is the future agricultural business entity in China,and the scale of family farm is a key factor affecting its development.With Guigang City in Guangxi as a point for the study,from the perspective of maximizing income of rural households,this paper uses production function model to calculate the moderate scale of food-production-based family farm at 5.7 ha,and makes policy recommendations.

  6. Study on DSM-based task planning of product cooperative development

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The results of analyzing the managerial characteristics and complexity of product cooperative development suggest that task planning is an important aspect for process management of product cooperative development and the method for planning tasks should be able to model the dependency between tasks and iterations during the development process. In this paper, a DSM-based method and its corresponding optimization algorithms are developed. At first the coupled task sets and uncoupled task sets are identified...

  7. The Student's Scientific Attitude and Creativity of Product in Environmental Issues Through Project Based Learning

    OpenAIRE

    Yustina, Yustina; Suwondo, Suwondo

    2015-01-01

    The purpose of this research was to got the information about student's scientific attitude and creativity of product and correlation both of it in enviromental issues through project based learning. This research was conducted from January to June 2015. Sample in this research were 34 students of 2014 grade in FKIP Biologi UR used parameters were (1) scientific attitude with 4 indicators (curiosity, cooperative, carefulness and discipline); (2) creativity of product. Observation instrument m...

  8. Design of Real Time Data Acquisition System Framework for Production Workshop Based on OPC Technology

    OpenAIRE

    Yue-xin Yang; Gong-chang Ren

    2017-01-01

    In this paper, the low level of production management information in a hydraulic torque converter enterprise is presented. It is needed to develop a digital assembly shop MES to solve this problem. There is a high demand for the real-time data acquisition of the production line in the digital assembly shop MES. According to the actual needs of MES in digital assembly workshop, a real time data acquisition system framework based on OPC technology and database technology is proposed. The framew...

  9. Top value platform chemicals: bio-based production of organic acids.

    Science.gov (United States)

    Becker, Judith; Lange, Anna; Fabarius, Jonathan; Wittmann, Christoph

    2015-12-01

    Driven by the quest for sustainability, recent years have seen a tremendous progress in bio-based production routes from renewable raw materials to commercial goods. Particularly, the production of organic acids has crystallized as a competitive and fast-evolving field, related to the broad applicability of organic acids for direct use, as polymer building blocks, and as commodity chemicals. Here, we review recent advances in metabolic engineering and industrial market scenarios with focus on organic acids as top value products from biomass, accessible through fermentation and biotransformation. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Design of Real Time Data Acquisition System Framework for Production Workshop Based on OPC Technology

    Directory of Open Access Journals (Sweden)

    Yue-xin Yang

    2017-01-01

    Full Text Available In this paper, the low level of production management information in a hydraulic torque converter enterprise is presented. It is needed to develop a digital assembly shop MES to solve this problem. There is a high demand for the real-time data acquisition of the production line in the digital assembly shop MES. According to the actual needs of MES in digital assembly workshop, a real time data acquisition system framework based on OPC technology and database technology is proposed. The framework can be used to meet the actual needs of the real time monitoring system and production business information processing in MES.

  11. Practical application of game theory based production flow planning method in virtual manufacturing networks

    Science.gov (United States)

    Olender, M.; Krenczyk, D.

    2016-08-01

    Modern enterprises have to react quickly to dynamic changes in the market, due to changing customer requirements and expectations. One of the key area of production management, that must continuously evolve by searching for new methods and tools for increasing the efficiency of manufacturing systems is the area of production flow planning and control. These aspects are closely connected with the ability to implement the concept of Virtual Enterprises (VE) and Virtual Manufacturing Network (VMN) in which integrated infrastructure of flexible resources are created. In the proposed approach, the players role perform the objects associated with the objective functions, allowing to solve the multiobjective production flow planning problems based on the game theory, which is based on the theory of the strategic situation. For defined production system and production order models ways of solving the problem of production route planning in VMN on computational examples for different variants of production flow is presented. Possible decision strategy to use together with an analysis of calculation results is shown.

  12. Process design and optimization of novel wheat-based continuous bioethanol production system.

    Science.gov (United States)

    Arifeen, Najmul; Wang, Ruohang; Kookos, Ioannis K; Webb, Colin; Koutinas, Apostolis A

    2007-01-01

    A novel design of a wheat-based biorefinery for bioethanol production, including wheat milling, gluten extraction as byproduct, fungal submerged fermentation for enzyme production, starch hydrolysis, fungal biomass autolysis for nutrient regeneration, yeast fermentation with recycling integrated with a pervaporation membrane for ethanol concentration, and fuel-grade ethanol purification by pressure swing distillation (PSD), was optimized in continuous mode using the equation-based software General Algebraic Modelling System (GAMS). The novel wheat biorefining strategy could result in a production cost within the range of dollars 0.96-0.50 gal(-1) ethanol (dollars 0.25-0.13 L(-1) ethanol) when the production capacity of the plant is within the range of 10-33.5 million gal y(-1) (37.85-126.8 million L y(-1)). The production of value-added byproducts (e.g., bran-rich pearlings, gluten, pure yeast cells) was identified as a crucial factor for improving the economics of fuel ethanol production from wheat. Integration of yeast fermentation with pervaporation membrane could result in the concentration of ethanol in the fermentation outlet stream (up to 40 mol %). The application of a PSD system that consisted of a low-pressure and a high-pressure column and employing heat integration between the high- and low-pressure columns resulted in reduced operating cost (up to 44%) for fuel-grade ethanol production.

  13. Smart sustainable bottle (SSB) system for E. coli based recombinant protein production.

    Science.gov (United States)

    Li, Zhaopeng; Carstensen, Bettina; Rinas, Ursula

    2014-11-05

    Recombinant proteins are usually required in laboratories interested in the protein but not in the production process itself. Thus, technical equipment which is easy to handle and straight forward protein production procedures are of great benefit to those laboratories. Companies selling single use cultivation bags and bioreactors are trying to satisfy at least part of these needs. However, single-use systems can contribute to major costs which might be acceptable when "good manufacturing practices" are required but not acceptable for most laboratories facing tight funding. The assembly and application of a simple self-made "smart sustainable bottle" (SSB) system for E. coli based protein production is presented. The core of the SSB system is a 2-L glass bottle which is operated at constant temperature, air flow, and stirrer speed without measurement and control of pH and dissolved oxygen. Oxygen transfer capacities are in the range as in conventional bioreactors operated at intermediate aeration rates and by far exceed those found in conventional shaking flasks and disposable bioreactors. The SSB system was applied for the production of various recombinant proteins using T7-based expression systems and a defined autoinduction medium. The production performance regarding amount and solubility of proteins with robust and delicate properties was as good as in state-of-the-art stirred tank commercial bioreactors. The SSB system represents a low cost protein production device applicable for easy, effective, and reproducible recombinant protein production.

  14. A Method of Numerical Control Equipment Appearance Design Based on Product Identity

    Science.gov (United States)

    Zhu, Zhijuan; Zhou, Qi; Li, Bin; Visser, Steve

    Research on numerical control (NC) equipment has been more and more abundant; however, there are few existing studies in the field of appearance design for NC equipments. This paper provided a method to generate new appearance design of NC equipments based on product identity (PI). For the purpose of providing guidelines to generate new concept of NC equipment design, this paper, therefore, took the DMG Company (a Germen NC equipment company) as a case, examined the total products of this company from two aspects: Product Image and Product Family. Task 1 was an evaluate task about the Product Image by using the semantic differential (SD) evaluation method; Task 2 was a study task about Product Family to find out features of the products and classify these features. During the Task 2, several features have been found out and summarized, and these features were classified into 3 different levels according to their frequency and importance. In the end, two appearance design samples have been generated based on the analysis above to prove the application of the research.

  15. A QFD-based optimization method for a scalable product platform

    Science.gov (United States)

    Luo, Xinggang; Tang, Jiafu; Kwong, C. K.

    2010-02-01

    In order to incorporate the customer into the early phase of the product development cycle and to better satisfy customers' requirements, this article adopts quality function deployment (QFD) for optimal design of a scalable product platform. A five-step QFD-based method is proposed to determine the optimal values for platform engineering characteristics (ECs) and non-platform ECs of the products within a product family. First of all, the houses of quality (HoQs) for all product variants are developed and a QFD-based optimization approach is used to determine the optimal ECs for each product variant. Sensitivity analysis is performed for each EC with respect to overall customer satisfaction (OCS). Based on the obtained sensitivity indices of ECs, a mathematical model is established to simultaneously optimize the values of the platform and the non-platform ECs. Finally, by comparing and analysing the optimal solutions with different number of platform ECs, the ECs with which the worst OCS loss can be avoided are selected as platform ECs. An illustrative example is used to demonstrate the feasibility of this method. A comparison between the proposed method and a two-step approach is conducted on the example. The comparison shows that, as a kind of single-stage approach, the proposed method yields better average degree of customer satisfaction due to the simultaneous optimization of platform and non-platform ECs.

  16. Prioritizing alarms from sensor-based detection models in livestock production

    DEFF Research Database (Denmark)

    Dominiak, Katarina Nielsen; Kristensen, Anders Ringgaard

    2017-01-01

    The objective of this review is to present, evaluate and discuss methods for reducing false alarms in sensor-based detection models developed for livestock production as described in the scientific literature. Papers included in this review are all peer-reviewed and present sensor-based detection...... models developed for modern livestock production with the purpose of optimizing animal health or managerial routines. The papers must present a performance for the model, but no criteria were specified for animal species or the condition sought to be detected. 34 papers published during the last 20 years...... (NBN) and Hidden phase-type Markov model, the NBN shows the greatest potential for future reduction of alerts from sensor-based detection models in livestock production. The included detection models are evaluated on three criteria; performance, time-window and similarity to determine whether...

  17. A study on conceptual design of tritium production fusion reactor based on spherical torus

    International Nuclear Information System (INIS)

    He Kaihui; Huang Jinhua

    2003-01-01

    Conceptual design of an advanced tritium production reactor based on spherical torus (ST), which is an intermediate application of fusion energy, is presented. Different from traditional Tokamak tritium production reactor design, advanced plasma physics performance and compact structural characteristics of ST are used to minimize tritium leakage and to maximize tritium breeding ratio with arrangement of tritium production blankets as possible as it can do within vacuum vessel in order to produce certain amount of excess tritium except self-sufficient plasma core, corresponding plant availability 40% or more. Based on 2D neutronics calculation, preliminary conceptual design of ST-TPR is presented. Based on systematical analysis, design risk, uncertainty and backup are introduced generally for the backgrounds of next detailed conceptual design. (authors)

  18. Aspect-based sentiment analysis to review products using Naïve Bayes

    Science.gov (United States)

    Mubarok, Mohamad Syahrul; Adiwijaya, Aldhi, Muhammad Dwi

    2017-08-01

    Product reviews can provide great benefits for consumers and producers. Number of reviews could be ranging from hundreds to thousands and containing various opinions. These make the process of analyzing and extracting information on existing reviews become increasingly difficult. In this research, sentiment analysis was used to analyze and extract sentiment polarity on product reviews based on a specific aspect of the product. This research was conducted in three phases, such as data preprocessing which involves part-of-speech (POS) tagging, feature selection using Chi Square, and classification of sentiment polarity of aspects using Naïve Bayes. Based on evaluation results, it is known that the system is able to perform aspect-based sentiment analysis with its highest F1-Measure of 78.12%.

  19. Consumer-Based Brand Equity of Products and Services: Assessing a Measurement Model with Competing Brands

    Directory of Open Access Journals (Sweden)

    Rafael Barreiros Porto

    2018-04-01

    Full Text Available  Objective: Identifying which brand in a category conveys more or less value to the consumer raises questions about the composition of brand equity measures and the brands that make up the category. Measures to identify Consumer-Based Brand Equity (CBBE may include functional assessments of consumer’s brand choice and firms’ brand performance, as long as they embrace competing brands. In view of this, this study comes up with a validation of a measurement model of Consumer-Based Brand Equity for competing brands of products and services, testing for possible moderation (product / service and experienced / non-experienced consumers. Method: Appraising 39 brands, the model was composed of 6 metrics: awareness, perceived quality, loyalty, association, exclusiveness and willingness to pay a price premium. Confirmatory factorial analysis revealed the CBBE structure and multigroup moderation tests showed the comparisons between products and services and between experienced and non-experienced consumers. Main Result: The metrics have convergent validity with very good model fit. The metrics are similar for products / services, but different for consumers with / without experience (evidence of moderation. Contributions: Based on this measure, researchers and marketers can identify whether their brand's performance has been perceived better or worse than that of their competitors. Relevance/Originality: This article is the first to offer a more complete scale to assess the consumer-based brand equity of products and services, allowing the researcher to compare the competitiveness between brands. 

  20. Aquatic food production modules in bioregenerative life support systems based on higher plants

    Science.gov (United States)

    Bluem, V.; Paris, F.

    Most bioregenerative life support systems (BLSS) are based on gravitropic higher plants which exhibit growth and seed generation disturbances in microgravity. Even when used for a lunar or martian base the reduced gravity may induce a decreased productivity in comparison to Earth. Therefore, the implementation of aquatic biomass production modules in higher plant and/or hybrid BLSS may compensate for this and offer, in addition, the possibility to produce animal protein for human nutrition. It was shown on the SLS-89 and SLS-90 space shuttle missions with the C.E.B.A.S.-MINI MODULE that the edible non gravitropic rootless higher aquatic plant Ceratophyllum demeresum exhibits an undisturbed high biomass production rate in space and that the teleost fish species, Xiphophorus helleri, adapts rapidly to space conditions without loss of its normal reproductive functions. Based on these findings a series of ground-based aquatic food production systems were developed which are disposed for utilization in space. These are plant production bioreactors for the species mentioned above and another suitable candidate, the lemnacean (duckweed) species, Wolffia arrhiza. Moreover, combined intensive aquaculture systems with a closed food loop between herbivorous fishes and aquatic and land plants are being developed which may be suitable for integration into a BLSS of higher complexity.

  1. Do cell based tissue engineering products for meniscus regeneration influence vascularization?

    Science.gov (United States)

    Koch, Matthias; Ehrenreich, Tobias; Koehl, Gudrun; Pattappa, Girish; Pfeifer, Christian; Loibl, Markus; Müller, Michael; Nerlich, Michael; Angele, Peter; Zellner, Johannes

    2017-01-01

    Meniscus regeneration is observed within the peripheral, vascularized zone but decreases in the inner two thirds alongside the vascularization. Within this avascular area, cell-based tissue-engineering-approaches appear to be a promising strategy for the treatment of meniscal defects. Evaluation of the angiogenic potential of cell-based tissue-engineering-products for meniscus healing. Evaluation of angiogenesis induced by rabbit meniscus-pellets, meniscus-cells (MC) or mesenchymal stem-cells (MSC) in cell-based tissue-engineering-products within a rabbit meniscus-ring was performed using a transparent dorsal skin fold chamber in nude mice. Observations were undertaken during a 14 days period. Cell preconditioning differed between experimental groups. Immunohistochemical analysis of the regenerated tissue in the meniscus-ring induced by cell loaded composite scaffolds for differentiation and anti-angiogenic factors were performed. Meniscus-pellets and MSC-/MC-based tissue-engineering-products induced angiogenesis. An accelerated vascularization was detected in the group of meniscus-pellets derived from the vascularized zone compared to avascular meniscus-pellets. In terms of cell-based tissue-engineering-products, chondrogenic preconditioning resulted in significantly increased vessel growth. MSC-constructs showed an accelerated angiogenesis. Immunohistochemical evaluation showed a progressive differentiation and lower content for anti-angiogenic endostatin in the precultured group. Preconditioning of MC-/MSC-based tissue-engineering-products is a promising tool to influence the angiogenic potential of tissue-engineering-products and to adapt these properties according to the aimed tissue qualities.

  2. Evaluation on Core Competitiveness of Wholesale Market of Agricultural Products Based on CWAA Operator

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    According to relevant data,we select five indices,namely management ability,organization and management capability,enterprise culture,development ability and technical equipment ability,to establish the index system of core competitiveness of wholesale market of agricultural products.Based on combination weight arithmetic average(CWAA) operator,we advance an evaluation model of core competitiveness of wholesale market of agricultural products which involves participation of many people.By inviting five exerts,we conduct evaluation in terms of management ability of wholesale market of agricultural products,organization and management capability of leadership,enterprise culture of wholesale market of agricultural products,future development ability of wholesale market of agricultural products,and exiting technical equipment ability of wholesale market of agricultural products.We adopt hundred-mark system to grade and evaluate core competitiveness of wholesale market of agricultural products.The results show that the experts’ evaluation score of core competitiveness of wholesale market of agricultural products is high.The evaluation result is reasonable and authentic and this model is feasible.

  3. Work productivity in a population-based cohort of patients with spondyloarthritis.

    Science.gov (United States)

    Haglund, Emma; Bremander, Ann; Bergman, Stefan; Jacobsson, Lennart T H; Petersson, Ingemar F

    2013-09-01

    To assess work productivity and associated factors in patients with SpA. This cross-sectional postal survey included 1773 patients with SpA identified in a regional health care register. Items on presenteeism (reduced productivity at work, 0-100%, 0 = no reduction) were answered by 1447 individuals. Absenteeism was defined as register-based sick leave using data from a national register. Disease duration, disease activity (BASDAI), physical function (BASFI), health-related quality of life (EQ-5D), anxiety (HAD-a), depression (HAD-d), self-efficacy [Arthritis Self-efficacy Scale (ASES) pain and symptom], physical activity and education were also measured. Forty-five per cent reported reduced productivity at work with a mean reduction of 20% (95% CI 18, 21) and women reported a higher mean reduction than men (mean 23% vs 17%, P productivity (r = 0.52-0.66, P productivity at work in patients with SpA regardless of age, gender and disease subgroup. ASES symptoms, HAD-a and education level productivity but were not significant in all strata for age, gender and disease subgroup. Work productivity was reduced in patients with SpA and more so in women. Worse quality of life, disease activity, physical function, self-efficacy and depression were all associated with reduced productivity at work in patients with SpA.

  4. Big Data Based Analysis Framework for Product Manufacturing and Maintenance Process

    OpenAIRE

    Zhang , Yingfeng; Ren , Shan

    2015-01-01

    Part 8: Cloud-Based Manufacturing; International audience; With the widely use of smart sensor devices in the product lifecycle management (PLM), it creates amount of real-time and muti-source lifecycle big data. These data allow decision makers to make better-informed PLM decisions. In this article, an overview framework of big data based analysis for product lifecycle (BDA-PL) was presented to provide a new paradigm by extending the techniques of Internet of Things (IoT) and big data analys...

  5. New watershed-based climate forecast products for hydrologists and water managers

    Science.gov (United States)

    Baker, S. A.; Wood, A.; Rajagopalan, B.; Lehner, F.; Peng, P.; Ray, A. J.; Barsugli, J. J.; Werner, K.

    2017-12-01

    Operational sub-seasonal to seasonal (S2S) climate predictions have advanced in skill in recent years but are yet to be broadly utilized by stakeholders in the water management sector. While some of the challenges that relate to fundamental predictability are difficult or impossible to surmount, other hurdles related to forecast product formulation, translation, relevance, and accessibility can be directly addressed. These include products being misaligned with users' space-time needs, products disseminated in formats users cannot easily process, and products based on raw model outputs that are biased relative to user climatologies. In each of these areas, more can be done to bridge the gap by enhancing the usability, quality, and relevance of water-oriented predictions. In addition, water stakeholder impacts can benefit from short-range extremes predictions (such as 2-3 day storms or 1-week heat waves) at S2S time-scales, for which few products exist. We present interim results of a Research to Operations (R2O) effort sponsored by the NOAA MAPP Climate Testbed to (1) formulate climate prediction products so as to reduce hurdles to in water stakeholder adoption, and to (2) explore opportunities for extremes prediction at S2S time scales. The project is currently using CFSv2 and National Multi-­Model Ensemble (NMME) reforecasts and forecasts to develop real-time watershed-based climate forecast products, and to train post-processing approaches to enhance the skill and reliability of raw real-time S2S forecasts. Prototype S2S climate data products (forecasts and associated skill analyses) are now being operationally staged at NCAR on a public website to facilitate further product development through interactions with water managers. Initial demonstration products include CFSv2-based bi-weekly climate forecasts (weeks 1-2, 2-3, and 3-4) for sub-regional scale hydrologic units, and NMME-based monthly and seasonal prediction products. Raw model mean skill at these time

  6. Empowering file-based radio production through media asset management systems

    Science.gov (United States)

    Muylaert, Bjorn; Beckers, Tom

    2006-10-01

    In recent years, IT-based production and archiving of media has matured to a level which enables broadcasters to switch over from tape- or CD-based to file-based workflows for the production of their radio and television programs. This technology is essential for the future of broadcasters as it provides the flexibility and speed of execution the customer demands by enabling, among others, concurrent access and production, faster than real-time ingest, edit during ingest, centrally managed annotation and quality preservation of media. In terms of automation of program production, the radio department is the most advanced within the VRT, the Flemish broadcaster. Since a couple of years ago, the radio department has been working with digital equipment and producing its programs mainly on standard IT equipment. Historically, the shift from analogue to digital based production has been a step by step process initiated and coordinated by each radio station separately, resulting in a multitude of tools and metadata collections, some of them developed in-house, lacking integration. To make matters worse, each of those stations adopted a slightly different production methodology. The planned introduction of a company-wide Media Asset Management System allows a coordinated overhaul to a unified production architecture. Benefits include the centralized ingest and annotation of audio material and the uniform, integrated (in terms of IT infrastructure) workflow model. Needless to say, the ingest strategy, metadata management and integration with radio production systems play a major role in the level of success of any improvement effort. This paper presents a data model for audio-specific concepts relevant to radio production. It includes an investigation of ingest techniques and strategies. Cooperation with external, professional production tools is demonstrated through a use-case scenario: the integration of an existing, multi-track editing tool with a commercially available

  7. Construction of Network Management Information System of Agricultural Products Supply Chain Based on 3PLs

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The necessity to construct the network management information system of 3PLs agricultural supply chain is analyzed,showing that 3PLs can improve the overall competitive advantage of agricultural supply chain.3PLs changes the homogeneity management into specialized management of logistics service and achieves the alliance of the subjects at different nodes of agricultural products supply chain.Network management information system structure of agricultural products supply chain based on 3PLs is constructed,including the four layers (the network communication layer,the hardware and software environment layer,the database layer,and the application layer) and 7 function modules (centralized control,transportation process management,material and vehicle scheduling,customer relationship,storage management,customer inquiry,and financial management).Framework for the network management information system of agricultural products supply chain based on 3PLs is put forward.The management of 3PLs mainly includes purchasing management,supplier relationship management,planning management,customer relationship management,storage management and distribution management.Thus,a management system of internal and external integrated agricultural enterprises is obtained.The network management information system of agricultural products supply chain based on 3PLs has realized the effective sharing of enterprise information of agricultural products supply chain at different nodes,establishing a long-term partnership revolving around the 3PLs core enterprise,as well as a supply chain with stable relationship based on the supply chain network system,so as to improve the circulation efficiency of agricultural products,and to explore the sales market for agricultural products.

  8. 73 Activity Based Costing and Product Pricing Decision: the Nigerian Case

    Directory of Open Access Journals (Sweden)

    Ebipanipre Gabriel Mieseigha

    2014-06-01

    Full Text Available This paper examined activity based costing and product pricing decisions in Nigeria so as to ascertain whether activity based costing have the ability to enhance profitability and control cost of manufacturing firms. Towards this end, a multiple correlation and regression estimation technique was used in analyzing the data obtained in the study. The study found that activity based costing affects product costing and pricing decision. In addition, the results showed that improved profitability and cost control can be achieved by implementing activity based costing approach by manufacturing firms. The implication is that traditional costing approach fails in many pricing situations by arbitrarily allocating indirect cost and activity based costing helps in allocating indirect cost accurately. Thus, it was recommended amongst others that activity based costing need to be practiced, maintained and implemented by manufacturing firms since it has a broad range of uses for a wide variety of company functions and operations in the area of process analysis, strategy support, time-based accounting, monitoring wastage, as well as quality and productivity management.

  9. Inert anode containing base metal and noble metal useful for the electrolytic production of aluminum

    Science.gov (United States)

    Ray, Siba P.; Liu, Xinghua

    2000-01-01

    An inert anode for production of metals such as aluminum is disclosed. The inert anode comprises a base metal selected from Cu and Ag, and at least one noble metal selected from Ag, Pd, Pt, Au, Rh, Ru, Ir and Os. The inert anode may optionally be formed of sintered particles having interior portions containing more base metal than noble metal and exterior portions containing more noble metal than base metal. In a preferred embodiment, the base metal comprises Cu, and the noble metal comprises Ag, Pd or a combination thereof.

  10. Contribution of milk production to global greenhouse gas emissions. An estimation based on typical farms.

    Science.gov (United States)

    Hagemann, Martin; Ndambi, Asaah; Hemme, Torsten; Latacz-Lohmann, Uwe

    2012-02-01

    Studies on the contribution of milk production to global greenhouse gas (GHG) emissions are rare (FAO 2010) and often based on crude data which do not appropriately reflect the heterogeneity of farming systems. This article estimates GHG emissions from milk production in different dairy regions of the world based on a harmonised farm data and assesses the contribution of milk production to global GHG emissions. The methodology comprises three elements: (1) the International Farm Comparison Network (IFCN) concept of typical farms and the related globally standardised dairy model farms representing 45 dairy regions in 38 countries; (2) a partial life cycle assessment model for estimating GHG emissions of the typical dairy farms; and (3) standard regression analysis to estimate GHG emissions from milk production in countries for which no typical farms are available in the IFCN database. Across the 117 typical farms in the 38 countries analysed, the average emission rate is 1.50 kg CO(2) equivalents (CO(2)-eq.)/kg milk. The contribution of milk production to the global anthropogenic emissions is estimated at 1.3 Gt CO(2)-eq./year, accounting for 2.65% of total global anthropogenic emissions (49 Gt; IPCC, Synthesis Report for Policy Maker, Valencia, Spain, 2007). We emphasise that our estimates of the contribution of milk production to global GHG emissions are subject to uncertainty. Part of the uncertainty stems from the choice of the appropriate methods for estimating emissions at the level of the individual animal.

  11. Measuring the Productivity of Energy Consumption of Major Industries in China: A DEA-Based Method

    Directory of Open Access Journals (Sweden)

    Xishuang Han

    2014-01-01

    Full Text Available Data envelopment analysis can be applied to measure the productivity of multiple input and output decision-making units. In addition, the data envelopment analysis-based Malmquist productivity index can be used as a tool for measuring the productivity change during different time periods. In this paper, we use an input-oriented model to measure the energy consumption productivity change from 1999 to 2008 of fourteen industry sectors in China as decision-making units. The results show that there are only four sectors that experienced effective energy consumption throughout the whole reference period. It also shows that these sectors always lie on the efficiency frontier of energy consumption as benchmarks. The other ten sectors experienced inefficiency in some two-year time periods and the productivity changes were not steady. The data envelopment analysis-based Malmquist productivity index provides a good way to measure the energy consumption and can give China's policy makers the information to promote their strategy of sustainable development.

  12. Consumer Decision-Making Styles Extension to Trust-Based Product Comparison Site Usage Model

    Directory of Open Access Journals (Sweden)

    Radoslaw Macik

    2016-09-01

    Full Text Available The paper describes an implementation of extended consumer decision-making styles concept in explaining consumer choices made in product comparison site environment in the context of trust-based information technology acceptance model. Previous research proved that trust-based acceptance model is useful in explaining purchase intention and anticipated satisfaction in product comparison site environment, as an example of online decision shopping aids. Trust to such aids is important in explaining their usage by consumers. The connections between consumer decision-making styles, product and sellers opinions usage, cognitive and affective trust toward online product comparison site, as well as choice outcomes (purchase intention and brand choice are explored trough structural equation models using PLS-SEM approach, using a sample of 461 young consumers. Research confirmed the validity of research model in explaining product comparison usage, and some consumer decision-making styles influenced consumers’ choices and purchase intention. Product and sellers reviews usage were partially mediating mentioned relationships.

  13. Perspectives on Resource Recovery from Bio-Based Production Processes: From Concept to Implementation

    DEFF Research Database (Denmark)

    S.B.A. Udugama, Isuru; Mansouri, Seyed Soheil; Mitic, Aleksandar

    2017-01-01

    Recovering valuable compounds from waste streams of bio-based production processes is in line with the circular economy paradigm, and is achievable by implementing “simple-to-use” and well-established process separation technologies. Such solutions are acceptable from industrial, economic...... and environmental points of view, implying relatively easy future implementation on pilot- and full-scale levels in the bio-based industry. Reviewing such technologies is therefore the focus here. Considerations about technology readiness level (TRL) and Net Present Value (NPV) are included in the review, since TRL...... and NPV contribute significantly to the techno-economic evaluation of future and promising process solutions. Based on the present review, a qualitative guideline for resource recovery from bio-based production processes is proposed. Finally, future approaches and perspectives toward identification...

  14. Life cycle assessment of Italian citrus-based products. Sensitivity analysis and improvement scenarios.

    Science.gov (United States)

    Beccali, Marco; Cellura, Maurizio; Iudicello, Maria; Mistretta, Marina

    2010-07-01

    Though many studies concern the agro-food sector in the EU and Italy, and its environmental impacts, literature is quite lacking in works regarding LCA application on citrus products. This paper represents one of the first studies on the environmental impacts of citrus products in order to suggest feasible strategies and actions to improve their environmental performance. In particular, it is part of a research aimed to estimate environmental burdens associated with the production of the following citrus-based products: essential oil, natural juice and concentrated juice from oranges and lemons. The life cycle assessment of these products, published in a previous paper, had highlighted significant environmental issues in terms of energy consumption, associated CO(2) emissions, and water consumption. Starting from such results the authors carry out an improvement analysis of the assessed production system, whereby sustainable scenarios for saving water and energy are proposed to reduce environmental burdens of the examined production system. In addition, a sensitivity analysis to estimate the effects of the chosen methods will be performed, giving data on the outcome of the study. Uncertainty related to allocation methods, secondary data sources, and initial assumptions on cultivation, transport modes, and waste management is analysed. The results of the performed analyses allow stating that every assessed eco-profile is differently influenced by the uncertainty study. Different assumptions on initial data and methods showed very sensible variations in the energy and environmental performances of the final products. Besides, the results show energy and environmental benefits that clearly state the improvement of the products eco-profile, by reusing purified water use for irrigation, using the railway mode for the delivery of final products, when possible, and adopting efficient technologies, as the mechanical vapour recompression, in the pasteurisation and

  15. Wavelet transform based on inner product in fault diagnosis of rotating machinery: A review

    Science.gov (United States)

    Chen, Jinglong; Li, Zipeng; Pan, Jun; Chen, Gaige; Zi, Yanyang; Yuan, Jing; Chen, Binqiang; He, Zhengjia

    2016-03-01

    As a significant role in industrial equipment, rotating machinery fault diagnosis (RMFD) always draws lots of attention for guaranteeing product quality and improving economic benefit. But non-stationary vibration signal with a large amount of noise on abnormal condition of weak fault or compound fault in many cases would lead to this task challenging. As one of the most powerful non-stationary signal processing techniques, wavelet transform (WT) has been extensively studied and widely applied in RMFD. Numerous publications about the study and applications of WT for RMFD have been presented to academic journals, technical reports and conference proceedings. Many previous publications admit that WT can be realized by means of inner product principle of signal and wavelet base. This paper verifies the essence on inner product operation of WT by simulation and field experiments. Then the development process of WT based on inner product is concluded and the applications of major developments in RMFD are also summarized. Finally, super wavelet transform as an important prospect of WT based on inner product are presented and discussed. It is expected that this paper can offer an in-depth and comprehensive references for researchers and help them with finding out further research topics.

  16. Progress in the production of bioethanol on starch-based feedstocks

    Directory of Open Access Journals (Sweden)

    Dragiša Savić

    2009-10-01

    Full Text Available Bioethanol produced from renewable biomass, such as sugar, starch, or lignocellulosic materials, is one of the alternative energy resources, which is both renewable and environmentally friendly. Although, the priority in global future ethanol production is put on lignocellulosic processing, which is considered as one of the most promising second-generation biofuel technologies, the utilizetion of lignocellulosic material for fuel ethanol is still under improvement. Sugar- based (molasses, sugar cane, sugar beet and starch-based (corn, wheat, triticale, potato, rice, etc. feedstock are still currently predominant at the industrial level and they are, so far, economically favorable compared to lingocelluloses. Currently, approx. 80 % of total world ethanol production is obtained from the fermentation of simple sugars by yeast. In Serbia, one of the most suitable and available agricultural raw material for the industrial ethanol production are cereals such as corn, wheat and triticale. In addition, surpluses of this feedstock are being produced in our country constantly. In this paper, a brief review of the state of the art in bioethanol production and biomass availability is given, pointing out the progress possibilities on starch-based production. The progress possibilities are discussed in the domain of feedstock choice and pretreatment, optimization of fermentation, process integration and utilization of the process byproducts.

  17. Water use efficiency and productivity of habanero pepper (Capsicum chinense Jacq.) based on two transplanting dates.

    Science.gov (United States)

    López-López, Rutilo; Inzunza-Ibarra, Marco Antonio; Sánchez-Cohen, Ignacio; Fierro-Álvarez, Andrés; Sifuentes-Ibarra, Ernesto

    2015-01-01

    Habanero pepper production was assessed with drip irrigation and plastic mulch, based on two transplanting dates. The objectives of the study were: (i) to evaluate the effect of two transplanting dates and the use of plastic mulch on water productivity and habanero pepper fruit yield under drip irrigation conditions; and (ii) to determine the profitability and economic viability of the product in the regional market. The work was conducted in the municipality of Huimanguillo, state of Tabasco, Mexico, in loam soils classified as Eutric Fluvisol. The Jaguar variety of habanero pepper, developed by INIFAP and possessing better genetic and productive characteristics, was used. Two transplanting dates were studied, (i) 30 January 2013 and (ii) 15 February 2013, with and without plastic mulch. The conclusions were: (i) application of irrigation depths based on crop evapotranspiration (ETc) and plastic mulch transplanted on 30 January increased the fruit yield of the crop and improved the benefit-cost ratio of the production system; and (ii) water use efficiency based on the 30 January transplanting date was 8.68 kg m⁻³ of water applied with plastic mulch, 6.51 kg m⁻³ without plastic mulch, and 3.65 kg m⁻³ for the 15 February transplanting date with plastic mulch.

  18. Regulatory requirements for clinical trial and marketing authorisation application for cell-based medicinal products.

    Science.gov (United States)

    Salmikangas, P; Flory, E; Reinhardt, J; Hinz, T; Maciulaitis, R

    2010-01-01

    The new era of regenerative medicine has led to rapid development of new innovative therapies especially for diseases and tissue/organ defects for which traditional therapies and medicinal products have not provided satisfactory outcome. Although the clinical use and developments of cell-based medicinal products (CBMPs) could be witnessed already for a decade, robust scientific and regulatory provisions for these products have only recently been enacted. The new Regulation for Advanced Therapies (EC) 1394/2007 together with the revised Annex I, Part IV of Directive 2001/83/EC provides the new legal framework for CBMPs. The wide variety of cell-based products and the foreseen limitations (small sample sizes, short shelf life) vs. particular risks (microbiological purity, variability, immunogenicity, tumourigenicity) associated with CBMPs have called for a flexible, case-by-case regulatory approach for these products. Consequently, a risk-based approach has been developed to allow definition of the amount of scientific data needed for a Marketing Authorisation Application (MAA) of each CBMP. The article provides further insight into the initial risk evaluation, as well as to the quality, non-clinical, and clinical requirements of CBMPs. Special somatic cell therapies designed for active immunotherapy are also addressed.

  19. Comparing internal and alliance-based new product development processes: case studies in the food industry

    OpenAIRE

    Olsen, Nina Veflen; Gripsrud, Geir

    2011-01-01

    This is the authors’ final, accepted and refereed manuscript to the article Companies may simultaneously pursue different new product development (NPD) strategies. This article reports a comparative two case design study of in-house NPD projects as well as alliance based NPD projects in a food company. Two contradicting proposition’s of the efficiency of NPD in an alliance compared to NPD performed internally are stated, and the findings indicate that the alliance based NPD solution create...

  20. Comparing internal and alliance-based new product development processes: case studies in the food industry

    OpenAIRE

    Olsen, Nina Veflen; Gripsrud, Geir

    2011-01-01

    Companies may simultaneously pursue different new product development (NPD) strategies. This article reports a comparative two case design study of in-house NPD projects as well as alliance based NPD projects in a food company. Two contradicting proposition’s of the efficiency of NPD in an alliance compared to NPD performed internally are stated, and the findings indicate that the alliance based NPD solution creates a better context for NPD than the in-house solution. Less forwarding of unsol...

  1. Study on environmental impact assessment index system of uranium production base construction plan

    International Nuclear Information System (INIS)

    Liu Xiaochao; Song Liquan

    2008-01-01

    The index system on planning environmental impact assessment of uranium mining base construction is discussed by using the hiberarchy method according to characteristics of uranium production and environmental protection object of planning assessment. The suggested index system is in favor of persistent exploitation of uranium resource and environmental protection in the uranium mining area, and can provide a reference for planning environmental impact assessment of uranium mining base construction in China. (authors)

  2. Agent-Based Model of Price Competition and Product Differentiation on Congested Networks

    OpenAIRE

    Lei Zhang; David Levinson; Shanjiang Zhu

    2007-01-01

    Using consistent agent-based techniques, this research models the decision-making processes of users and infrastructure owner/operators to explore the welfare consequence of price competition, capacity choice, and product differentiation on congested transportation networks. Component models include: (1) An agent-based travel demand model wherein each traveler has learning capabilities and unique characteristics (e.g. value of time); (2) Econometric facility provision cost models; and (3) Rep...

  3. Design of Control System for Flexible Packaging Bags Palletizing Production Line Based on PLC

    Science.gov (United States)

    Zheng, Huiping; Chen, Lin; Zhao, Xiaoming; Liu, Zhanyang

    Flexible packaging bags palletizing production line is to put the bags in the required area according to particular order and size, in order to finish handling, storage, loading and unloading, transportation and other logistics work of goods. Flexible packaging bags palletizing line is composed of turning bags mechanism, shaping mechanism, indexing mechanism, marshalling mechanism, pushing bags mechanism, pressing bags mechanism, laminating mechanism, elevator, tray warehouse, tray conveyor and loaded tray conveyor. Whether the whole production line can smoothly run depends on each of the above equipment and precision control among them. In this paper the technological process and the control logic of flexible packaging bags palletizing production line is introduced. Palletizing process of the production line realized automation by means of a control system based on programmable logic controller (PLC). It has the advantages of simple structure, reliable and easy maintenance etc.

  4. Fuzzy Case-Based Reasoning in Product Style Acquisition Incorporating Valence-Arousal-Based Emotional Cellular Model

    Directory of Open Access Journals (Sweden)

    Fuqian Shi

    2012-01-01

    Full Text Available Emotional cellular (EC, proposed in our previous works, is a kind of semantic cell that contains kernel and shell and the kernel is formalized by a triple- L = , where P denotes a typical set of positive examples relative to word-L, d is a pseudodistance measure on emotional two-dimensional space: valence-arousal, and δ is a probability density function on positive real number field. The basic idea of EC model is to assume that the neighborhood radius of each semantic concept is uncertain, and this uncertainty will be measured by one-dimensional density function δ. In this paper, product form features were evaluated by using ECs and to establish the product style database, fuzzy case based reasoning (FCBR model under a defined similarity measurement based on fuzzy nearest neighbors (FNN incorporating EC was applied to extract product styles. A mathematical formalized inference system for product style was also proposed, and it also includes uncertainty measurement tool emotional cellular. A case study of style acquisition of mobile phones illustrated the effectiveness of the proposed methodology.

  5. Techno-economic simulation data based deterministic and stochastic for product engineering research and development BATAN

    International Nuclear Information System (INIS)

    Petrus Zacharias; Abdul Jami

    2010-01-01

    Researches conducted by Batan's researchers have resulted in a number competences that can be used to produce goods and services, which will be applied to industrial sector. However, there are difficulties how to convey and utilize the R and D products into industrial sector. Evaluation results show that each research result should be completed with techno-economy analysis to obtain the feasibility of a product for industry. Further analysis on multy-product concept, in which one business can produce many main products, will be done. For this purpose, a software package simulating techno-economy I economic feasibility which uses deterministic and stochastic data (Monte Carlo method) was been carried out for multi-product including side product. The programming language used in Visual Basic Studio Net 2003 and SQL as data base processing software. This software applied sensitivity test to identify which investment criteria is sensitive for the prospective businesses. Performance test (trial test) has been conducted and the results are in line with the design requirement, such as investment feasibility and sensitivity displayed deterministically and stochastically. These result can be interpreted very well to support business decision. Validation has been performed using Microsoft Excel (for single product). The result of the trial test and validation show that this package is suitable for demands and is ready for use. (author)

  6. Simulating fission product transients via the history-based local-parameter methodology

    International Nuclear Information System (INIS)

    Jenkins, D.A.; Rouben, B.; Salvatore, M.

    1993-01-01

    This paper describes the fission-product-calculation capacity of the history-based local-parameter methodology for evaluating lattice properties for use in core-tracking calculations in CANDU reactors. In addition to taking into account the individual past history of each bundles flux/power level, fuel temperature, and coolant density and temperature that the bundle has seen during its stay in the core, the latest refinement of the history-based method provides the capability of fission-product-drivers. It allows the bundle-specific concentrations of the three basic groups of saturating fission products to be calculated in steady state or following a power transient, including long shutdowns. The new capability is illustrated by simulating the startup period following a typical long-shutdown, starting from a snapshot in the Point Lepreau operating history. 9 refs., 7 tabs

  7. Hormesis-based anti-aging products: a case study of a novel cosmetic

    DEFF Research Database (Denmark)

    Rattan, Suresh; Kryzch, Valerie; Schnebert, Sylvianne

    2013-01-01

    in reducing the age-related accumulation of molecular damage. For example, repeated heat stress-induced synthesis of heat shock proteins has been shown to have a variety of anti-aging effects on growth and other cellular and biochemical characteristics of normal human skin fibroblasts, keratinocytes...... and cosmeceuticals. Here we present the example of a skin care cosmetic as one of the first successful product developments incorporating the ideas of hormesis. This was based on the studies to analyse the molecular effects of active ingredients extracted from the roots of the Chinese herb Sanchi (Panax notoginseng...... and removal of abnormal proteins. Acceptance of such a hormesis-based product by the wider public could be instrumental in the social recognition of the concept of hormesis as the beneficial effects of mild stress of choice, and will encourage the development of novel health care products with physical...

  8. Exploring barriers and opportunities in adopting crowdsourcing based new product development in manufacturing SMEs

    Science.gov (United States)

    Qin, Shengfeng; Van der Velde, David; Chatzakis, Emmanouil; McStea, Terry; Smith, Neil

    2016-10-01

    Crowdsourcing is an innovative business practice of obtaining needed services, ideas, or content or even funds by soliciting contributions from a large group of people (the `Crowd'). The potential benefits of utilizing crowdsourcing in product design are well-documented, but little research exists on what are the barriers and opportunities in adopting crowdsourcing in new product development (NPD) of manufacturing SMEs. In order to answer the above questions, a Proof of Market study is carried out on crowdsourcing-based product design under an Innovate UK funded Smart project, which aims at identifying the needs, challenges and future development opportunities associated with adopting crowdsourcing strategies for NPD. The research findings from this study are reported here and can be used to guide future development of crowdsourcing-based collaborative design methods and tools and provide some practical references for industry to adopt this new and emerging collaborative design method in their business.

  9. Top-Down and Bottom-Up Approach for Model-Based Testing of Product Lines

    Directory of Open Access Journals (Sweden)

    Stephan Weißleder

    2013-03-01

    Full Text Available Systems tend to become more and more complex. This has a direct impact on system engineering processes. Two of the most important phases in these processes are requirements engineering and quality assurance. Two significant complexity drivers located in these phases are the growing number of product variants that have to be integrated into the requirements engineering and the ever growing effort for manual test design. There are modeling techniques to deal with both complexity drivers like, e.g., feature modeling and model-based test design. Their combination, however, has been seldom the focus of investigation. In this paper, we present two approaches to combine feature modeling and model-based testing as an efficient quality assurance technique for product lines. We present the corresponding difficulties and approaches to overcome them. All explanations are supported by an example of an online shop product line.

  10. Conceptual design of tritium production fusion reactor based on spherical torus

    International Nuclear Information System (INIS)

    He Kaihui; Huang Jinhua

    2003-01-01

    Conceptual design of an advanced tritium production fusion reactor based on spherical torus, which is intermediate application of fusion energy, was presented in this paper. Differing from the traditional tokamak tritium production reactor design, advanced plasma physics performance and compact structural characteristics of ST were used to minimize tritium leakage and maximize tritium breeding ratio with arrangement of tritium production blankets within vacuum vessel as possible in order to produce 1 kg excess tritium except need of self-sufficient plasma core with 40% or more corresponding plant availability. Based on 2D neutronics calculation, preliminary conceptual design of ST-TPR was presented, providing the backgrounds and reference for next detailed conceptual design

  11. Exploiting epoxidized natural rubber latex (ENRL) as a starting raw material for latex-based products

    Science.gov (United States)

    Siti Nor Qamarina, M.; Fatimah Rubaizah, M. R.; Nurul Suhaira, A.; Norhanifah, M. Y.

    2017-12-01

    Epoxidized natural rubber latex (ENRL) is a chemically modified natural rubber latex produced from epoxidation process that involves usage of organic peracids. Conversion of the ENRL into dry rubber products has been known to exhibit many beneficial properties, however limited published works were found on diversifiying the ENRL latex-based products applications. In this preliminary work, different source of raw materials and neutralization systems were investigated. The objective was to explore possibilities in producing distinctive ENRL. Findings have demonstrated that different source of raw materials and neutralization systems influenced the typical ENRL specifications, stability behavior and particle size distribution. Morphological observations performed on these ENRL systems appeared to agree with the ENRL characteristics achieved. Since experimenting these two main factors resulted in encouraging ENRL findings, detailed work shall be further scrutinized to search for an optimum condition in producing marketable ENRL specifically for latex-based products applications.

  12. Characteristic-Based, Task-Based, and Results-Based: Three Value Systems for Assessing Professionally Produced Technical Communication Products.

    Science.gov (United States)

    Carliner, Saul

    2003-01-01

    Notes that technical communicators have developed different methodologies for evaluating the effectiveness of their work, such as editing, usability testing, and determining the value added. Explains that at least three broad value systems underlie the assessment practices: characteristic-based, task-based, and results-based. Concludes that the…

  13. Scientifically Based Research in Educational Products: Vendors and Consumers on Filling the Certification Gap

    Science.gov (United States)

    Caruthers, Bill J.

    2009-01-01

    The 2002 reauthorization of the Elementary and Secondary Education Act, or No Child Left Behind (NCLB) changed school law in the United States. Public schools can utilize federal funds to purchase only those educational products subject to scientifically based research. No dedicated certification intermediary (CI) exists to determine individual…

  14. The economics of cyanobacteria-based biofuel production: challenges and opportunities

    NARCIS (Netherlands)

    Sharma, N.K.; Stal, L.J.; Sharma, N.K.; Rai, A.K.; Stal, L.J.

    2014-01-01

    In the current scenario, biofuels based on algae, including cyanobacteria, are expensive, complex to produce, and are only just entering the commercial phase in small quantities in pilot or demonstration plants. This chapter discusses the current scenario of using cyanobacteria for the production of

  15. Development of a Pancake-Making Method for a Batter-Based Product

    Science.gov (United States)

    Cake and pancake are major batter-based products made with soft wheat flour. A standardized baking method for high-ratio cake has been widely used for evaluating the cake-baking performance of soft wheat flour. Chlorinated flour is used to make high-ratio cake, and the cake formula contains relative...

  16. Variance-based sensitivity analysis of BIOME-BGC for gross and net primary production

    NARCIS (Netherlands)

    Raj, R.; Hamm, N.A.S.; van der Tol, C.; Stein, A.

    2014-01-01

    Parameterization and calibration of a process-based simulator (PBS) is a major challenge when simulating gross and net primary production (GPP and NPP). The large number of parameters makes the calibration computationally expensive and is complicated by the dependence of several parameters on other

  17. Productivity and nutritive quality of three brassica varieties for use in pasture-based systems

    Science.gov (United States)

    Brassicas are gaining popularity among pasture-based livestock producers to extend grazing during the ‘summer slump’ and throughout the fall. A 2-yr study was conducted to compare biomass production and nutrient composition of ‘Barisca’ rapeseed (RAP; Brassica napus L.), ‘Inspiration’ canola (CAN; B...

  18. Physically based modelling and optimal operation for product drying during post-harvest processing.

    NARCIS (Netherlands)

    Boxtel, van A.J.B.; Lukasse, L.; Farkas, I.; Rendik, Z.

    1996-01-01

    The development of new procedures for crop production and post-harvest processing requires models. Models based on physical backgrounds are most useful for this purpose because of their extrapolation potential. An optimal procedure is developed for alfalfa drying using a physical model. The model

  19. Sustainable dairy manure-based biogas? : A perspective from the combined biogas and agricultural production system

    NARCIS (Netherlands)

    Hoang, Dieu Linh; Davis, Christopher Bryan; Nonhebel, Sanderine

    2017-01-01

    Dairy manure-based biogas, an emerging source of renewable energy, is a result of a recycling process which often leads to the thought that manure production is the beginning of this biogas supply chain by energy producers. However, dairy manure is only a byproduct of an agricultural system whose

  20. APPLICATION EXPERIENCE OF GOAT'S MILK BASED PRODUCTS AMONG CHILDREN, SUFFERING FROM ATOPIC DERMATITIS

    Directory of Open Access Journals (Sweden)

    T.G. Malanicheva

    2007-01-01

    Full Text Available The purpose of the work is to study the efficiency of the diet therapy against atopic dermatitis by means of the goat's milk based products among children at different age. The researchers observed 188 children aged between 3 months and 18 years, suffering from atopic dermatitis aggravated by the mycotic infection. Patients of the main group (102 children under 3 received goat's milk based products within the hypo allergic diet — «Nanny» and «Nanny — Zolotaya Kozochka» adapted milk formulas, while children over 3 received «Amal Tea» instant goat's milk. The research findings have showed that the introduction of the goat's milk based products into the food ration leads not only to the positive short term results — achievement of the clinical remission on 12th–20th day from the moment the therapy starts, but also to the positive long term effect — remission extension, reduction of the disease recurrences, reduction of the general IgE level in blood serum and offending IgE allergens to the cow milk proteins and casein. Thus, the replacement of the cow milk based products within the ration of patients for «Nanny» and «Nanny — Zolotaya Kozochka» adapted milk formulas and «Amal Tea» instant goat's milk allows for optimization of the atopic dermatitis diet therapy among children at different age.Key words: atopic dermatitis, diet therapy, goat's milk.

  1. Pricing-based revenue management for flexible products on a network

    NARCIS (Netherlands)

    Sierag, DIrk

    2017-01-01

    This paper proposes and analyses a pricing-based revenue management model that allows flexible products on a network, with a non-trivial extension to group reservations. Under stochastic demand the problem can be solved using dynamic programming, though it suffers from the curse of dimensionality.

  2. Nutritional approach for designing meat-based functional food products with nuts.

    Science.gov (United States)

    Olmedilla-Alonso, B; Granado-Lorencio, F; Herrero-Barbudo, C; Blanco-Navarro, I

    2006-01-01

    Meat and meat products are essential components of diets in developed countries and despite the convincing evidence that relate them to an increased risk for CVD, a growing consumption of meat products is foreseen. Epidemiological studies show that regular consumption of nuts, in general, and walnuts in particular, correlates inversely with myocardial infarction and ischaemic vascular disease. We assess the nutritional basis for and technological approach to the development of functional meat-based products potentially relevant in cardiovascular disease (CVD) risk reduction. Using the available strategies in the meat industry (reformulation processes) and a food-based approach, we address the design and development of restructured beef steak with added walnuts, potentially functional for CVD risk reduction. Its adequacy as a vehicle for active nutrients is confirmed by a pharmacokinetic pilot study in humans using gamma-tocopherol as an exposure biomarker in chylomicrons during the post-prandial state. Effect and potential "functionality" is being assessed by a dietary intervention study in subjects at risk and markers and indicators related to CVD are being evaluated. Within the conceptual framework of evidence-based medicine, development of meat-based functional products may become a useful approach for specific applications, with a potential market and health benefits of great importance at a population level.

  3. The Effects of Multimedia Task-Based Language Teaching on EFL Learners' Oral L2 Production

    Science.gov (United States)

    BavaHarji, Madhubala; Gheitanchian, Mehrnaz; Letchumanan, Krishnaveni

    2014-01-01

    This study examined the effects of tasks, with varying levels of complexity, i.e. simple, + complex and ++ complex tasks on EFL learners' oral production in a multimedia task-based language teaching environment. 57 EFL adult learners carried out a total of 12 tasks, in sets of four tasks within three different themes and different levels of…

  4. Externalities of biomass based electricity production compared to power generation from coal in the Netherlands

    NARCIS (Netherlands)

    Faaij, A.; Meuleman, B.

    1997-01-01

    Externalities of electricity production from biomass and coal are investigated and compared for the Dutch context. Effects on economic activity and employment are investigated with help of Input/Output and multiplier tables. Valuations of damage from emissions to air are based on generic data from

  5. Frames and bases in tensor products of Hilbert spaces and Hilbert C ...

    Indian Academy of Sciences (India)

    [14] Heil C E and Walnut D F, Continuous and discrete wavelet transforms, SIAM Review 31. (1989) 628–666. [15] Khosravi A and Asgari M S, Frames and bases in tensor product of Hilbert spaces, Int. J. Math. 4(6) (2003) 527–538. [16] Lance E C, Hilbert C. ∗. -modules – a toolkit for operator algebraists, London Math. Soc.

  6. Innovation in Integrated Chemical Product-Process Design - Development through a Model-based Systems Approach

    DEFF Research Database (Denmark)

    Conte, Elisa

    The ‘consumer oriented chemicals based products’ such as shampoos, sunscreens, insect repellents are used everyday by millions of people. They are structured products, constituted of numerous chemicals. This complexity gives the reason for which mainly experimental techniques are still employed...

  7. A Jerte Valley Cherry-Based Product as a Supply of Tryptophan

    Directory of Open Access Journals (Sweden)

    María Garrido

    2012-01-01

    Full Text Available L -Tryptophan (tryptophan is an essential amino acid in humans. It has important roles as a precursor of different bioactive compounds. Based on previous studies in which tryptophan has been shown to be present in fresh cherries, the aim of the present work was to analyze the tryptophan content of a Jerte Valley cherry-based product. A previously optimized method of analysis of tryptophan was used, ie, high-performance liquid chromatography with fluorescence detection (HPLC/FL. As expected, HPLC/FL technique permitted to detect and quantify the tryptophan content in a different matrix rather than fresh cherries. In fact, the Jerte Valley cherry-based product contained 69.54 ± 10.64 ppm of tryptophan, thereby showing that this product is a good source of tryptophan. In summary, it has been proven that the Jerte Valley cherry-based product is rich in tryptophan and may be indicated as a supply of this essential amino acid as well as having potential health benefits for conditions where tryptophan is necessary.

  8. Operations Strategy Development in Project-based Production – a building contractor implements Lean

    DEFF Research Database (Denmark)

    Koch, Christian; Friis, Ole Uhrskov

    2015-01-01

    Purpose: To study how operations strategy innovation occurs in project-based production and organisation. Design/methodology/approach: A longitudinal case study encompassing the processes at the company headquarters and in two projects using Lean. Findings: The operations strategy development com...

  9. Voice-Based Marketing for Agricultural Products : A Case Study in Rural Northern Ghana

    NARCIS (Netherlands)

    Dittoh, Francis; Aart, Chris Van; Boer, Victor De

    2013-01-01

    We present a study conducted in rural Northern Ghana about issues around the marketing of agricultural products and the need of mobile-based ICT solutions. The need for the spread of information and web access to communities in developing countries has given rise to the design and development of

  10. Space-Based Space Surveillance Logistics Case Study: A Qualitative Product Support Element Analysis

    Science.gov (United States)

    2017-12-01

    REPORT TYPE AND DATES COVERED Joint applied project 4. TITLE AND SUBTITLE SPACE-BASED SPACE SURVEILLANCE LOGISTICS CASE STUDY: A QUALITATIVE ...INTENTIONALLY LEFT BLANK v ABSTRACT This research provides a qualitative analysis of the logistics impacts, effects, and sustainment challenges...provides a qualitative product support element-by-element review for both research questions. Chapters IV and V present the findings, results

  11. Consumer Product Data for Exposure Screening, Modeling and Prioritization, and Risk-based Decision Making

    Science.gov (United States)

    This presentation will provide an overview of the research efforts underway in EPA ORD's Chemicals for Safety and Sustainability research program which relate to providing information to prioritize chemicals in consumer products based on risk. It also describes effort to make dat...

  12. Analyses of Receptive and Productive Korean EFL Vocabulary: Computer-Based Vocabulary Learning Program

    Science.gov (United States)

    Kim, Scott Sungki

    2013-01-01

    The present research study investigated the effects of 8 versions of a computer-based vocabulary learning program on receptive and productive knowledge levels of college students. The participants were 106 male and 103 female Korean EFL students from Kyungsung University and Kwandong University in Korea. Students who participated in versions of…

  13. Learning Outcomes in Vocational Education: A Business Plan Development by Production-Based Learning Model Approach

    Science.gov (United States)

    Kusumaningrum, Indrati; Hidayat, Hendra; Ganefri; Anori, Sartika; Dewy, Mega Silfia

    2016-01-01

    This article describes the development of a business plan by using production-based learning approach. In addition, this development also aims to maximize learning outcomes in vocational education. Preliminary analysis of curriculum and learning and the needs of the market and society become the basic for business plan development. To produce a…

  14. Sequential optimization of a terrestrial biosphere model constrained by multiple satellite based products

    Science.gov (United States)

    Ichii, K.; Kondo, M.; Wang, W.; Hashimoto, H.; Nemani, R. R.

    2012-12-01

    Various satellite-based spatial products such as evapotranspiration (ET) and gross primary productivity (GPP) are now produced by integration of ground and satellite observations. Effective use of these multiple satellite-based products in terrestrial biosphere models is an important step toward better understanding of terrestrial carbon and water cycles. However, due to the complexity of terrestrial biosphere models with large number of model parameters, the application of these spatial data sets in terrestrial biosphere models is difficult. In this study, we established an effective but simple framework to refine a terrestrial biosphere model, Biome-BGC, using multiple satellite-based products as constraints. We tested the framework in the monsoon Asia region covered by AsiaFlux observations. The framework is based on the hierarchical analysis (Wang et al. 2009) with model parameter optimization constrained by satellite-based spatial data. The Biome-BGC model is separated into several tiers to minimize the freedom of model parameter selections and maximize the independency from the whole model. For example, the snow sub-model is first optimized using MODIS snow cover product, followed by soil water sub-model optimized by satellite-based ET (estimated by an empirical upscaling method; Support Vector Regression (SVR) method; Yang et al. 2007), photosynthesis model optimized by satellite-based GPP (based on SVR method), and respiration and residual carbon cycle models optimized by biomass data. As a result of initial assessment, we found that most of default sub-models (e.g. snow, water cycle and carbon cycle) showed large deviations from remote sensing observations. However, these biases were removed by applying the proposed framework. For example, gross primary productivities were initially underestimated in boreal and temperate forest and overestimated in tropical forests. However, the parameter optimization scheme successfully reduced these biases. Our analysis

  15. Thermodynamic analysis of a solar-based multi-generation system with hydrogen production

    International Nuclear Information System (INIS)

    Ozturk, Murat; Dincer, Ibrahim

    2013-01-01

    Thermodynamic analysis of a renewable-based multi-generation energy production system which produces a number of outputs, such as power, heating, cooling, hot water, hydrogen and oxygen is conducted. This solar-based multi-generation system consists of four main sub-systems: Rankine cycle, organic Rankine cycle, absorption cooling and heating, and hydrogen production and utilization. Exergy destruction ratios and rates, power or heat transfer rates, energy and exergy efficiencies of the system components are carried out. Some parametric studies are performed in order to examine the effects of varying operating conditions (e.g., reference temperature, direct solar radiation and receiver temperature) on the exergy efficiencies of the sub-systems as well as the whole system. The solar-based multi-generation system which has an exergy efficiency of 57.35%, is obtained to be higher than using these sub-systems separately. The evaluation of the exergy efficiency and exergy destruction for the sub-systems and the overall system show that the parabolic dish collectors have the highest exergy destruction rate among constituent parts of the solar-based multi-generation system, due to high temperature difference between the working fluid and collector receivers. -- Highlights: ► Development of a new multi-generation system for solar-based hydrogen production. ► Investigation of exergy efficiencies and destructions in each process of the system. ► Evaluation of varying operating conditions on the exergy destruction and efficiency

  16. Cell therapy medicinal product regulatory framework in Europe and its application for MSC based therapy development

    Directory of Open Access Journals (Sweden)

    Janis eAncans

    2012-08-01

    Full Text Available Advanced therapy medicinal products (ATMPs, including cell therapy products, form a new class of medicines in the European Union. Since ATMPs are at the forefront of scientific innovation in medicine, specific regulatory framework has been developed for these medicines and implemented from 2009. The Committee for Advanced Therapies (CAT has been established at European Medicines Agency (EMA for centralized classification, certification and evaluation procedures, and other ATMP related tasks. Guidance documents, initiatives and interaction platforms are available to make the new framework more accessible for small and medium-sized enterprises, academia, hospitals and foundations. Good understanding of centralised and national components of the regulatory system is required to plan product development. It is in the best interests of cell therapy developers to utilise provided resources starting with the preclinical stage. Whilst there have not been mesenchymal stem cell (MSC based medicine authorisations in the EU, three MSC products have received marketing approval in other regions since 2011. Information provided on regulatory requirements, procedures and initiatives is aimed to facilitate MSC based medicinal product development and authorisation in the EU.

  17. Numerical estimation of ultrasonic production of hydrogen: Effect of ideal and real gas based models.

    Science.gov (United States)

    Kerboua, Kaouther; Hamdaoui, Oualid

    2018-01-01

    Based on two different assumptions regarding the equation describing the state of the gases within an acoustic cavitation bubble, this paper studies the sonochemical production of hydrogen, through two numerical models treating the evolution of a chemical mechanism within a single bubble saturated with oxygen during an oscillation cycle in water. The first approach is built on an ideal gas model, while the second one is founded on Van der Waals equation, and the main objective was to analyze the effect of the considered state equation on the ultrasonic hydrogen production retrieved by simulation under various operating conditions. The obtained results show that even when the second approach gives higher values of temperature, pressure and total free radicals production, yield of hydrogen does not follow the same trend. When comparing the results released by both models regarding hydrogen production, it was noticed that the ratio of the molar amount of hydrogen is frequency and acoustic amplitude dependent. The use of Van der Waals equation leads to higher quantities of hydrogen under low acoustic amplitude and high frequencies, while employing ideal gas law based model gains the upper hand regarding hydrogen production at low frequencies and high acoustic amplitudes. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Developing Novel Protein-based Materials using Ultrabithorax: Production, Characterization, and Functionalization

    Science.gov (United States)

    Huang, Zhao

    2011-12-01

    Compared to 'conventional' materials made from metal, glass, or ceramics, protein-based materials have unique mechanical properties. Furthermore, the morphology, mechanical properties, and functionality of protein-based materials may be optimized via sequence engineering for use in a variety of applications, including textile materials, biosensors, and tissue engineering scaffolds. The development of recombinant DNA technology has enabled the production and engineering of protein-based materials ex vivo. However, harsh production conditions can compromise the mechanical properties of protein-based materials and diminish their ability to incorporate functional proteins. Developing a new generation of protein-based materials is crucial to (i) improve materials assembly conditions, (ii) create novel mechanical properties, and (iii) expand the capacity to carry functional protein/peptide sequences. This thesis describes development of novel protein-based materials using Ultrabithorax, a member of the Hox family of proteins that regulate developmental pathways in Drosophila melanogaster. The experiments presented (i) establish the conditions required for the assembly of Ubx-based materials, (ii) generate a wide range of Ubx morphologies, (iii) examine the mechanical properties of Ubx fibers, (iv) incorporate protein functions to Ubx-based materials via gene fusion, (v) pattern protein functions within the Ubx materials, and (vi) examine the biocompatibility of Ubx materials in vitro. Ubx-based materials assemble at mild conditions compatible with protein folding and activity, which enables Ubx chimeric materials to retain the function of appended proteins in spatial patterns determined by materials assembly. Ubx-based materials also display mechanical properties comparable to existing protein-based materials and demonstrate good biocompatibility with living cells in vitro. Taken together, this research demonstrates the unique features and future potential of novel Ubx-based

  19. Potential of Diverse Prokaryotic Organisms for Glycerol-based Polyhydroxyalkanoate Production

    Directory of Open Access Journals (Sweden)

    Martin Koller

    2015-06-01

    Full Text Available The potential and performance of various Gram-negative, Gram-positive and archaeal wild type microorganisms, and bacterial mixed cultures, as well as the application of genetically engineered strains as whole-cell biocatalysts for glycerol-based polyhydroxyalkanoate production are analyzed and assessed. This encompasses the comparison of growth and polyhydroxyalkanoate accumulation kinetics, thermo-mechanical properties of isolated glycerol-based polyhydroxyalkanoate of different composition on the monomeric level, and the presentation of mathematical models developed to describe glycerol-based polyhydroxyalkanoate production processes. For all these aspects, the article provides a detailed compilation of the contemporary state of knowledge, and gives an outlook to expected future developments.

  20. Gross domestic product estimation based on electricity utilization by artificial neural network

    Science.gov (United States)

    Stevanović, Mirjana; Vujičić, Slađana; Gajić, Aleksandar M.

    2018-01-01

    The main goal of the paper was to estimate gross domestic product (GDP) based on electricity estimation by artificial neural network (ANN). The electricity utilization was analyzed based on different sources like renewable, coal and nuclear sources. The ANN network was trained with two training algorithms namely extreme learning method and back-propagation algorithm in order to produce the best prediction results of the GDP. According to the results it can be concluded that the ANN model with extreme learning method could produce the acceptable prediction of the GDP based on the electricity utilization.

  1. Caractérisation des systemes de production à base de maïs dans ...

    African Journals Online (AJOL)

    La présente recherche vise à caractériser les systèmes de production à base de maïs au Bénin pour un appui-conseil ciblé aux producteurs de maïs. La base de sondage est la base de données du sous-projet "Centre National de Spécialisation sur le Maïs", exécuté par l'Institut National des Recherches Agricoles du Bénin ...

  2. Comparison of ground based indices (API and AQI) with satellite based aerosol products.

    Science.gov (United States)

    Zheng, Sheng; Cao, Chun-Xiang; Singh, Ramesh P

    2014-08-01

    Air quality in mega cities is one of the major concerns due to serious health issues and its indirect impact to the climate. Among mega cities, Beijing city is considered as one of the densely populated cities with extremely poor air quality. The meteorological parameters (wind, surface temperature, air temperature and relative humidity) control the dynamics and dispersion of air pollution. China National Environmental Monitoring Centre (CNEMC) started air pollution index (API) as of 2000 to evaluate air quality, but over the years, it was felt that the air quality is not well represented by API. Recently, the Ministry of Environmental Protection (MEP) of the People's Republic of China (PRC) started using a new index "air quality index (AQI)" from January 2013. We have compared API and AQI with three different MODIS (MODIS - Moderate Resolution Imaging SpectroRadiometer, onboard the Terra/Aqua satellites) AOD (aerosol optical depth) products for ten months, January-October, 2013. The correlation between AQI and Aqua Deep Blue AOD was found to be reasonably good as compared with API, mainly due to inclusion of PM2.5 in the calculation of AQI. In addition, for every month, the correlation coefficient between AQI and Aqua Deep Blue AOD was found to be relatively higher in the month of February to May. According to the monthly average distribution of precipitation, temperature, and PM10, the air quality in the months of June-September was better as compared to those in the months of February-May. AQI and Aqua Deep Blue AOD show highly polluted days associated with dust event, representing true air quality of Beijing. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. A web-based system for supporting global land cover data production

    Science.gov (United States)

    Han, Gang; Chen, Jun; He, Chaoying; Li, Songnian; Wu, Hao; Liao, Anping; Peng, Shu

    2015-05-01

    Global land cover (GLC) data production and verification process is very complicated, time consuming and labor intensive, requiring huge amount of imagery data and ancillary data and involving many people, often from different geographic locations. The efficient integration of various kinds of ancillary data and effective collaborative classification in large area land cover mapping requires advanced supporting tools. This paper presents the design and development of a web-based system for supporting 30-m resolution GLC data production by combining geo-spatial web-service and Computer Support Collaborative Work (CSCW) technology. Based on the analysis of the functional and non-functional requirements from GLC mapping, a three tiers system model is proposed with four major parts, i.e., multisource data resources, data and function services, interactive mapping and production management. The prototyping and implementation of the system have been realised by a combination of Open Source Software (OSS) and commercially available off-the-shelf system. This web-based system not only facilitates the integration of heterogeneous data and services required by GLC data production, but also provides online access, visualization and analysis of the images, ancillary data and interim 30 m global land-cover maps. The system further supports online collaborative quality check and verification workflows. It has been successfully applied to China's 30-m resolution GLC mapping project, and has improved significantly the efficiency of GLC data production and verification. The concepts developed through this study should also benefit other GLC or regional land-cover data production efforts.

  4. Site-level evaluation of satellite-based global terrestrial gross primary production and net primary production monitoring.

    Science.gov (United States)

    David P. Turner; William D. Ritts; Warren B. Cohen; Thomas K. Maeirsperger; Stith T. Gower; Al A. Kirschbaum; Steve W. Runnings; Maosheng Zhaos; Steven C. Wofsy; Allison L. Dunn; Beverly E. Law; John L. Campbell; Walter C. Oechel; Hyo Jung Kwon; Tilden P. Meyers; Eric E. Small; Shirley A. Kurc; John A. Gamon

    2005-01-01

    Operational monitoring of global terrestrial gross primary production (GPP) and net primary production (NPP) is now underway using imagery from the satellite-borne Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. Evaluation of MODIS GPP and NPP products will require site-level studies across a range of biomes, with close attention to numerous scaling...

  5. Crop Management Effects on the Energy and Carbon Balances of Maize Stover-Based Ethanol Production

    Directory of Open Access Journals (Sweden)

    Prem Woli

    2014-12-01

    Full Text Available This study was conducted to identify the crop management options—the combinations of various cultivars, irrigation amounts, planting dates, and soils—that would maximize the energy sustainability and eco-friendliness of maize (Zea mays L. stover-based ethanol production systems in the Mississippi Delta. Stover yields simulated with CERES-Maize were used to compute net energy value (NEV and carbon credit balance (CCB, the indicators of sustainability and eco-friendliness of ethanol production, respectively, for various scenarios. As the results showed, deeper soils with higher water holding capacities had larger NEV and CCB values. Both NEV and CCB had sigmoid relationships with irrigation amount and planting date and could be maximized by planting the crop during the optimum planting window. Stover yield had positive effects on NEV and CCB, whereas travel distance had negative. The influence of stover yield was larger than that of travel distance, indicating that increasing feedstock yields should be emphasized over reducing travel distance. The NEV and CCB values indicated that stover-based ethanol production in the Mississippi Delta is sustainable and environmentally friendly. The study demonstrated that the energy sustainability and eco-friendliness of maize stover-based ethanol production could be increased with alternative crop management options.

  6. Bacterial cellulose production from cotton-based waste textiles: enzymatic saccharification enhanced by ionic liquid pretreatment.

    Science.gov (United States)

    Hong, Feng; Guo, Xiang; Zhang, Shuo; Han, Shi-fen; Yang, Guang; Jönsson, Leif J

    2012-01-01

    Cotton-based waste textiles were explored as alternative feedstock for production of bacterial cellulose (BC) by Gluconacetobacter xylinus. The cellulosic fabrics were treated with the ionic liquid (IL) 1-allyl-3-methylimidazolium chloride ([AMIM]Cl). [AMIM]Cl caused 25% inactivation of cellulase activity at a concentration as low as of 0.02 g/mL and decreased BC production during fermentation when present in concentrations higher than 0.0005 g/mL. Therefore, removal of residual IL by washing with hot water was highly beneficial to enzymatic saccharification as well as BC production. IL-treated fabrics exhibited a 5-7-fold higher enzymatic hydrolysis rate and gave a seven times larger yield of fermentable sugars than untreated fabrics. BC from cotton cloth hydrolysate was obtained at an yield of 10.8 g/L which was 83% higher than that from the culture grown on glucose-based medium. The BC from G. xylinus grown on IL-treated fabric hydrolysate had a 79% higher tensile strength than BC from glucose-based culture medium which suggests that waste cotton pretreated with [AMIM]Cl has potential to serve as a high-quality carbon source for BC production. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. Calculating Program for Decommissioning Work Productivity based on Decommissioning Activity Experience Data

    Energy Technology Data Exchange (ETDEWEB)

    Song, Chan-Ho; Park, Seung-Kook; Park, Hee-Seong; Moon, Jei-kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    KAERI is performing research to calculate a coefficient for decommissioning work unit productivity to calculate the estimated time decommissioning work and estimated cost based on decommissioning activity experience data for KRR-2. KAERI used to calculate the decommissioning cost and manage decommissioning activity experience data through systems such as the decommissioning information management system (DECOMMIS), Decommissioning Facility Characterization DB System (DEFACS), decommissioning work-unit productivity calculation system (DEWOCS). In particular, KAERI used to based data for calculating the decommissioning cost with the form of a code work breakdown structure (WBS) based on decommissioning activity experience data for KRR-2.. Defined WBS code used to each system for calculate decommissioning cost. In this paper, we developed a program that can calculate the decommissioning cost using the decommissioning experience of KRR-2, UCP, and other countries through the mapping of a similar target facility between NPP and KRR-2. This paper is organized as follows. Chapter 2 discusses the decommissioning work productivity calculation method, and the mapping method of the decommissioning target facility will be described in the calculating program for decommissioning work productivity. At KAERI, research on various decommissioning methodologies of domestic NPPs will be conducted in the near future. In particular, It is difficult to determine the cost of decommissioning because such as NPP facility have the number of variables, such as the material of the target facility decommissioning, size, radiographic conditions exist.

  8. Calculating Program for Decommissioning Work Productivity based on Decommissioning Activity Experience Data

    International Nuclear Information System (INIS)

    Song, Chan-Ho; Park, Seung-Kook; Park, Hee-Seong; Moon, Jei-kwon

    2014-01-01

    KAERI is performing research to calculate a coefficient for decommissioning work unit productivity to calculate the estimated time decommissioning work and estimated cost based on decommissioning activity experience data for KRR-2. KAERI used to calculate the decommissioning cost and manage decommissioning activity experience data through systems such as the decommissioning information management system (DECOMMIS), Decommissioning Facility Characterization DB System (DEFACS), decommissioning work-unit productivity calculation system (DEWOCS). In particular, KAERI used to based data for calculating the decommissioning cost with the form of a code work breakdown structure (WBS) based on decommissioning activity experience data for KRR-2.. Defined WBS code used to each system for calculate decommissioning cost. In this paper, we developed a program that can calculate the decommissioning cost using the decommissioning experience of KRR-2, UCP, and other countries through the mapping of a similar target facility between NPP and KRR-2. This paper is organized as follows. Chapter 2 discusses the decommissioning work productivity calculation method, and the mapping method of the decommissioning target facility will be described in the calculating program for decommissioning work productivity. At KAERI, research on various decommissioning methodologies of domestic NPPs will be conducted in the near future. In particular, It is difficult to determine the cost of decommissioning because such as NPP facility have the number of variables, such as the material of the target facility decommissioning, size, radiographic conditions exist

  9. Land Suitability and Insurance Premiums: A GIS-based Multicriteria Analysis Approach for Sustainable Rice Production

    Directory of Open Access Journals (Sweden)

    Md Monjurul Islam

    2018-05-01

    Full Text Available The purpose of this research is to develop a land suitability model for rice production based on suitability levels and to propose insurance premiums to obtain maximum returns based on the harvest index and subsidy dependence factor for the marginal and moderately suitable lands in the northern part of Bangladesh. A multicriteria analysis was undertaken and a rice land suitability map was developed using geographical information system and analytical hierarchy process. The analysis identified that 22.74% of the area was highly suitable, while 14.86% was marginally suitable, and 28.54% was moderately suitable for rice production. However, 32.67% of the area, which was occupied by water bodies, rivers, forests, and settlements, is permanently not suitable; 1.19% is presently not suitable. To motivate low-quality land owners to produce rice, there is no alternative but to provide protection through crop insurance. We suggest producing rice up to marginally suitable lands to obtain support from insurance. The minimum coverage is marginal coverage (70% to cover the production costs, while the maximum coverage is high coverage (90% to enable a maximum return. This new crop insurance model, based on land suitability can be a rational support for owners of different quality land to increase production.

  10. Cost Evaluation with G4-ECONS Program for SI based Nuclear Hydrogen Production Plant

    International Nuclear Information System (INIS)

    Kim, Jong-ho; Lee, Ki-young; Kim, Yong-wan

    2014-01-01

    Contemporary hydrogen is production is primarily based on fossil fuels, which is not considered as environments friendly and economically efficient. To achieve the hydrogen economy, it is very important to produce a massive amount of hydrogen in a clean, safe and efficient way. Nuclear production of hydrogen would allow massive production of hydrogen at economic prices while avoiding environments pollution reducing the release of carbon dioxide. Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The economic assessment was performed for nuclear hydrogen production plant consisting of VHTR coupled with SI cycle. For the study, G4-ECONS developed by EMWG of GIF was appropriately modified to calculate the LUHC, assuming 36 months of plant construction time, 5 % of annual interest rate and 12.6 % of fixed charge rate. In G4-ECONS program, LUHC is calculated by the following formula; LUHC = (Annualized TCIC + Annualized O-M Cost + Annualized Fuel Cycle Cost + Annualized D-D Cost) / Annual Hydrogen Production Rate

  11. The economic bases of demographic reproduction: from the domestic mode of production to wage-earning.

    Science.gov (United States)

    Meillassoux, C

    1983-10-01

    This paper explores the economic basis of demographic reproduction through an analysis of the shift from self-sustaining agricultural production to wage earning in the industrial sector. In subsistence societies, the upper limits of demographic reproduction are set more by agricultural capacities than by women's natural fecundity. An increase in the productivity of agriculture is a necessary precondition for demographic growth. Such societies are based on intergenerational circulation of surplus product, i.e., the community contains preproductive members who are fed and bred until they reach a productive age, producers whose surplus product exceeds their individual consumption, and postproducers who depend on the younger generation for their subsistence. The domestic mode of collective labor becomes weakened, however, when producer members become wage earners as a result of temporary or permanent rural exodus. Under such conditions, the investment of the older generation in the next may be lost to the benefit of the industrial sector employing the rural migrants. The shift has 2 major implications. 1st, population growth is no longer tied to domestic agricultural productivity or the storage capcity of the community; rather, it is related to access to cash, wage levels, employment duration, and food prices. These circumstances foster a higher probability of demographic growth. 2nd, disruption of the circulation of subsistence produces depopulation of the rural areas and severe deterioration of the living conditions in these areas.

  12. Empirical Research on China’s Carbon Productivity Decomposition Model Based on Multi-Dimensional Factors

    Directory of Open Access Journals (Sweden)

    Jianchang Lu

    2015-04-01

    Full Text Available Based on the international community’s analysis of the present CO2 emissions situation, a Log Mean Divisia Index (LMDI decomposition model is proposed in this paper, aiming to reflect the decomposition of carbon productivity. The model is designed by analyzing the factors that affect carbon productivity. China’s contribution to carbon productivity is analyzed from the dimensions of influencing factors, regional structure and industrial structure. It comes to the conclusions that: (a economic output, the provincial carbon productivity and energy structure are the most influential factors, which are consistent with China’s current actual policy; (b the distribution patterns of economic output, carbon productivity and energy structure in different regions have nothing to do with the Chinese traditional sense of the regional economic development patterns; (c considering the regional protectionism, regional actual situation need to be considered at the same time; (d in the study of the industrial structure, the contribution value of industry is the most prominent factor for China’s carbon productivity, while the industrial restructuring has not been done well enough.

  13. Finding the top influential bloggers based on productivity and popularity features

    Science.gov (United States)

    Khan, Hikmat Ullah; Daud, Ali

    2017-07-01

    A blog acts as a platform of virtual communication to share comments or views about products, events and social issues. Like other social web activities, blogging actions spread to a large number of people. Users influence others in many ways, such as buying a product, having a particular political or social opinion or initiating new activity. Finding the top influential bloggers is an active research domain as it helps us in various fields, such as online marketing, e-commerce, product search and e-advertisements. There exist various models to find the influential bloggers, but they consider limited features using non-modular approach. This paper proposes a new model, Popularity and Productivity Model (PPM), based on a modular approach to find the top influential bloggers. It consists of popularity and productivity modules which exploit various features. We discuss the role of each proposed and existing features and evaluate the proposed model against the standard baseline models using datasets from the real-world blogs. The analysis using standard performance evaluation measures verifies that both productivity and popularity modules play a vital role to find influential bloggers in blogging community in an effective manner.

  14. ABOUT THE INFORMATIZATION MANAGING OF THE PRODUCTION SYSTEM BASED ON THE MATRIX MODEL

    Directory of Open Access Journals (Sweden)

    Aleksandr V. Romanenko

    2016-06-01

    Full Text Available Introduction. The problem of formation and information management systems management of manufacturing system businesses is analyzed in the article. Existing schemes of the Russian economy increased demands for its efficiency. Stability integrative model business entity lifecycle requires a search for solutions based on new technologies in the organization and operation of information management systems. Results. On the basis of the analysis of their importance for sustainability of the entity components of its life cycle conclusions are made about the applicability of the matrix model to the production system management. Contradiction in the application of this management model are solved by separating the information on the basis of the state of product and process state. This division contributes to a better organization of the distribution of responsibility between the profit centers and cost centers. As an indicator of the efficiency of profit centers, it is proposed to use the ratio revenue net from the sale of products to the current value of the planned costs of its production. To assess the effectiveness of cost centers used index that is similar to profitability of fixed assets taking into account the cost of resources utilized by each cost center separately. Discussion and Conclusions. We analyze the relationship between goals management of the production system with the role of profit centers and cost centers. The proposed basis of the formation model information ensures the management of the production system, contributing to improve the quality of managerial decisions in implementing the competitive advantages of business entity.

  15. Structural brain aging and speech production: a surface-based brain morphometry study.

    Science.gov (United States)

    Tremblay, Pascale; Deschamps, Isabelle

    2016-07-01

    While there has been a growing number of studies examining the neurofunctional correlates of speech production over the past decade, the neurostructural correlates of this immensely important human behaviour remain less well understood, despite the fact that previous studies have established links between brain structure and behaviour, including speech and language. In the present study, we thus examined, for the first time, the relationship between surface-based cortical thickness (CT) and three different behavioural indexes of sublexical speech production: response duration, reaction times and articulatory accuracy, in healthy young and older adults during the production of simple and complex meaningless sequences of syllables (e.g., /pa-pa-pa/ vs. /pa-ta-ka/). The results show that each behavioural speech measure was sensitive to the complexity of the sequences, as indicated by slower reaction times, longer response durations and decreased articulatory accuracy in both groups for the complex sequences. Older adults produced longer speech responses, particularly during the production of complex sequence. Unique age-independent and age-dependent relationships between brain structure and each of these behavioural measures were found in several cortical and subcortical regions known for their involvement in speech production, including the bilateral anterior insula, the left primary motor area, the rostral supramarginal gyrus, the right inferior frontal sulcus, the bilateral putamen and caudate, and in some region less typically associated with speech production, such as the posterior cingulate cortex.

  16. Data to calculate emissions intensity for individual beef cattle reared on pasture-based production systems

    Directory of Open Access Journals (Sweden)

    G.A. McAuliffe

    2018-04-01

    Full Text Available With increasing concern about environmental burdens originating from livestock production, the importance of farming system evaluation has never been greater. In order to form a basis for trade-off analysis of pasture-based cattle production systems, liveweight data from 90 Charolais × Hereford-Friesian calves were collected at a high temporal resolution at the North Wyke Farm Platform (NWFP in Devon, UK. These data were then applied to the Intergovernmental Panel on Climate Change (IPCC modelling framework to estimate on-farm methane emissions under three different pasture management strategies, completing a foreground dataset required to calculate emissions intensity of individual beef cattle.

  17. Hydrogen production by methane reforming based on micro-gap discharge

    International Nuclear Information System (INIS)

    Liu, N N; Wang, M X; Liu, K Y; Bai, M D

    2013-01-01

    Based on micro-gap strong ionization discharge, this paper presents a study of hydrogen production by methane reforming at room temperature and atmospheric pressure without catalyst. Influence rules of conversion of methane and production of hydrogen were studied by changing discharge power and feed gas flow rate. Results show that when the discharge power was about 341 W, the discharge gap was 0.47 mm and the flow rate of feed gas was 100 mL min −1 , the conversion of methane and yield of hydrogen reached optimization. The conversion rate of methane and the highest yield of hydrogen were 68.14 % and 51.34 %, respectively.

  18. Installation and testing of a hospital-based cyclotron for radiation therapy and isotope production

    International Nuclear Information System (INIS)

    Almond, P.R.; Marbach, J.R.; Otte, V.A.

    1983-01-01

    A hospital based cyclotron is under installation at The University of Texas M.D. Anderson Hospital in Houston. This machine will be used for the production of radioactive isotopes and for the generation of neutrons for the radiotherapy treatment of cancer. It is a Cyclotron Corporation CP-42 negative proton accelerator. For neutron production the protons are transported through an isocentrically mounted beam transport system that can be rotated around the patient. The shielding requirements of this facility will be described as will the initial measurements on the characteristics of the neutron beam

  19. Expanding the range of 'druggable' targets with natural product-based libraries: an academic perspective.

    Science.gov (United States)

    Bauer, Renato A; Wurst, Jacqueline M; Tan, Derek S

    2010-06-01

    Existing drugs address a relatively narrow range of biological targets. As a result, libraries of drug-like molecules have proven ineffective against a variety of challenging targets, such as protein-protein interactions, nucleic acid complexes, and antibacterial modalities. In contrast, natural products are known to be effective at modulating such targets, and new libraries are being developed based on underrepresented scaffolds and regions of chemical space associated with natural products. This has led to several recent successes in identifying new chemical probes that address these challenging targets. Copyright 2010 Elsevier Ltd. All rights reserved.

  20. A two-stage ethanol-based biodiesel production in a packed bed reactor

    DEFF Research Database (Denmark)

    Xu, Yuan; Nordblad, Mathias; Woodley, John

    2012-01-01

    were conducted in a simulated series of reactors by repeatedly passing the reaction mixture through a single reactor, with separation of the by-product glycerol and water between passes in the first and second stages, respectively. The second stage brought the major components of biodiesel to ‘in......-spec’ levels according to the European biodiesel specifications for methanol-based biodiesel. The highest overall productivity achieved in the first stage was 2.52 kg FAEE(kg catalyst)−1 h−1 at a superficial velocity of 7.6 cm min−1, close to the efficiency of a stirred tank reactor under similar conditions...

  1. Look-ahead procedures for Lanczos-type product methods based on three-term recurrences

    Energy Technology Data Exchange (ETDEWEB)

    Gutknecht, M.H.; Ressel, K.J. [Swiss Center for Scientific Computing, Zuerich (Switzerland)

    1996-12-31

    Lanczos-type product methods for the solution of large sparse non-Hermitian linear systems either square the Lanczos process or combine it with a local minimization of the residual. They inherit from the underlying Lanczos process the danger of breakdown. For various Lanczos-type product methods that are based on the Lanczos three-term recurrence, look-ahead versions are presented, which avoid such breakdowns or near breakdowns with a small computational overhead. Different look-ahead strategies are discussed and their efficiency is demonstrated in several numerical examples.

  2. Physiochemical Properties and Probiotic Survivability of Symbiotic Corn-Based Yogurt-Like Product.

    Science.gov (United States)

    Wang, Cuina; Zheng, Huajie; Liu, Tingting; Wang, Dawei; Guo, Mingruo

    2017-09-01

    Corn is a major grain produced in northern China. Corn-based functional food products are very limited. In this study, a symbiotic corn-based yogurt-like product was developed. Corn milk was prepared through grinding, extrusion and milling, and hydration processes. Corn extrudate was prepared under the optimized conditions of corn flour particle size fermented at 35 °C for 6 h using a probiotic starter culture containing L. plantarum. Chemical composition (%) of the symbiotic corn-based yogurt-like product was: total solids (17.13 ± 0.31), protein (1.12 ± 0.03), fat (0.30 ± 0.05), carbohydrates (15.14 ± 0.19), and ash (0.16 ± 0.02), respectively. pH value of this symbiotic product decreased from 4.50 ± 0.03 to 3.88 ± 0.13 and the population of L. plantarum declined from 7.8 ± 0.09 to 7.1 ± 0.14 log CFU/mL during storage at 4 °C. SDS-PAGE analysis showed that there were no changes in protein profile during storage. Texture and consistency were also stable during the period of this study. It can be concluded that a set-type corn-based symbiotic yogurt-like product with good texture and stability was successfully developed that would be a good alternative to the dairy yogurt. © 2017 Institute of Food Technologists®.

  3. TECHNOLOGY OF PRODUCTION OF CERAMIC TILES BASED ON DOLERITE AND FUSIBLE CLAY

    Directory of Open Access Journals (Sweden)

    Pleshko Marianna Viktorovna

    2018-02-01

    Full Text Available The paper presents a completely new composition of the ceramic mass for production of ceramic tiles for interior lining of walls, on the basis of fusible clay. The optimal compositions of jade engobe and glossy glaze, the most suitable for this composition, are determined. A new technological scheme is developed for production of ceramic tiles for interior lining based on dolerite and fusible clay. The curve of firing, which is the most suitable for charge masses and decorative coating compositions being used, has been constructed. Subject: ceramic mass for the production of ceramic facing tiles. Ceramic tiles are the most popular building material in Russia. The most promising technology for its production from the standpoint of technical and economic efficiency is the technology of rapid single firing, which is rarely used at the plants of our country. In this regard, the development and implementation of new effective compositions of ceramic masses and decorative coatings that are the most compatible with the specifics of rapid single firing technology, based on new unconventional raw materials, are very relevant and promising. Research objectives: development of technological parameters, compositions of ceramic masses and decorative coatings of ceramic tiles for the internal wall lining that provide an increase in tiles production efficiency using the technology of rapid single firing through the use of non-traditional plagioclase-pyroxene raw materials: dolerites, loam and technogenic raw materials. Materials and methods: technological, numerical and experimental studies were conducted. To select the optimal composition of the ceramic mass, the method of mathematical planning was used, namely the simplex-centroid design of Scheffe. To identify the scientific foundations of the energy-efficient production technology being developed, differential thermal and X-ray phase, optical, electron microscopic and dilatometric studies were applied

  4. Evaluating the hydrological consistency of evaporation products using satellite-based gravity and rainfall data

    Science.gov (United States)

    López, Oliver; Houborg, Rasmus; McCabe, Matthew Francis

    2017-01-01

    Advances in space-based observations have provided the capacity to develop regional- to global-scale estimates of evaporation, offering insights into this key component of the hydrological cycle. However, the evaluation of large-scale evaporation retrievals is not a straightforward task. While a number of studies have intercompared a range of these evaporation products by examining the variance amongst them, or by comparison of pixel-scale retrievals against ground-based observations, there is a need to explore more appropriate techniques to comprehensively evaluate remote-sensing-based estimates. One possible approach is to establish the level of product agreement between related hydrological components: for instance, how well do evaporation patterns and response match with precipitation or water storage changes? To assess the suitability of this consistency-based approach for evaluating evaporation products, we focused our investigation on four globally distributed basins in arid and semi-arid environments, comprising the Colorado River basin, Niger River basin, Aral Sea basin, and Lake Eyre basin. In an effort to assess retrieval quality, three satellite-based global evaporation products based on different methodologies and input data, including CSIRO-PML, the MODIS Global Evapotranspiration product (MOD16), and Global Land Evaporation: the Amsterdam Methodology (GLEAM), were evaluated against rainfall data from the Global Precipitation Climatology Project (GPCP) along with Gravity Recovery and Climate Experiment (GRACE) water storage anomalies. To ensure a fair comparison, we evaluated consistency using a degree correlation approach after transforming both evaporation and precipitation data into spherical harmonics. Overall we found no persistent hydrological consistency in these dryland environments. Indeed, the degree correlation showed oscillating values between periods of low and high water storage changes, with a phase difference of about 2-3 months

  5. Systematical estimation of GPM-based global satellite mapping of precipitation products over China

    Science.gov (United States)

    Zhao, Haigen; Yang, Bogang; Yang, Shengtian; Huang, Yingchun; Dong, Guotao; Bai, Juan; Wang, Zhiwei

    2018-03-01

    As the Global Precipitation Measurement (GPM) Core Observatory satellite continues its mission, new version 6 products for Global Satellite Mapping of Precipitation (GSMaP) have been released. However, few studies have systematically evaluated the GSMaP products over mainland China. This study quantitatively evaluated three GPM-based GSMaP version 6 precipitation products for China and eight subregions referring to the Chinese daily Precipitation Analysis Product (CPAP). The GSMaP products included near-real-time (GSMaP_NRT), microwave-infrared reanalyzed (GSMaP_MVK), and gauge-adjusted (GSMaP_Gau) data. Additionally, the gauge-adjusted Integrated Multi-Satellite Retrievals for Global Precipitation Measurement Mission (IMERG_Gau) was also assessed and compared with GSMaP_Gau. The analyses of the selected daily products were carried out at spatiotemporal resolutions of 1/4° for the period of March 2014 to December 2015 in consideration of the resolution of CPAP and the consistency of the coverage periods of the satellite products. The results indicated that GSMaP_MVK and GSMaP_NRT performed comparably and underdetected light rainfall events (Pearson linear correlation coefficient (CC), fractional standard error (FSE), and root-mean-square error (RMSE) metrics during the summer. Compared with GSMaP_NRT and GSMaP_MVK, GSMaP_Gau possessed significantly improved metrics over mainland China and the eight subregions and performed better in terms of CC, RMSE, and FSE but underestimated precipitation to a greater degree than IMERG_Gau. As a quantitative assessment of the GPM-era GSMaP products, these validation results will supply helpful references for both end users and algorithm developers. However, the study findings need to be confirmed over a longer future study period when the longer-period IMERG retrospectively-processed data are available.

  6. CuInSe2-Based Thin-Film Photovoltaic Technology in the Gigawatt Production Era

    Science.gov (United States)

    Kushiya, Katsumi

    2012-10-01

    The objective of this paper is to review current status and future prospect on CuInSe2 (CIS)-based thin-film photovoltaic (PV) technology. In CIS-based thin-film PV technology, total-area cell efficiency in a small-area (i.e., smaller than 1 cm2) solar cell with top grids has been over 20%, while aperture-area efficiency in a large-area (i.e., larger than 800 cm2 as definition) monolithic module is approaching to an 18% milestone. However, most of the companies with CIS-based thin-film PV technology still stay at a production research stage, except Solar Frontier K.K. In July, 2011, Solar Frontier has joined the gigawatt (GW) group by starting up their third facility with a 0.9-GW/year production capacity. They are keeping the closest position to pass a 16% module-efficiency border by transferring the developed technologies in the R&D and accelerating the preparation for the future based on the concept of a product life-cycle management.

  7. Steam explosion and its combinatorial pretreatment refining technology of plant biomass to bio-based products.

    Science.gov (United States)

    Chen, Hong-Zhang; Liu, Zhi-Hua

    2015-06-01

    Pretreatment is a key unit operation affecting the refinery efficiency of plant biomass. However, the poor efficiency of pretreatment and the lack of basic theory are the main challenges to the industrial implementation of the plant biomass refinery. The purpose of this work is to review steam explosion and its combinatorial pretreatment as a means of overcoming the intrinsic characteristics of plant biomass, including recalcitrance, heterogeneity, multi-composition, and diversity. The main advantages of the selective use of steam explosion and other combinatorial pretreatments across the diversity of raw materials are introduced. Combinatorial pretreatment integrated with other unit operations is proposed as a means to exploit the high-efficiency production of bio-based products from plant biomass. Finally, several pilot- and demonstration-scale operations of the plant biomass refinery are described. Based on the principle of selective function and structure fractionation, and multi-level and directional composition conversion, an integrated process with the combinatorial pretreatments of steam explosion and other pretreatments as the core should be feasible and conform to the plant biomass refinery concept. Combinatorial pretreatments of steam explosion and other pretreatments should be further exploited based on the type and intrinsic characteristics of the plant biomass used, the bio-based products to be made, and the complementarity of the processes. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Corn-based ethanol production compromises goal of reducing nitrogen export by the Mississippi River.

    Science.gov (United States)

    Donner, Simon D; Kucharik, Christopher J

    2008-03-18

    Corn cultivation in the United States is expected to increase to meet demand for ethanol. Nitrogen leaching from fertilized corn fields to the Mississippi-Atchafalaya River system is a primary cause of the bottom-water hypoxia that develops on the continental shelf of the northern Gulf of Mexico each summer. In this study, we combine agricultural land use scenarios with physically based models of terrestrial and aquatic nitrogen to examine the effect of present and future expansion of corn-based ethanol production on nitrogen export by the Mississippi and Atchafalaya Rivers to the Gulf of Mexico. The results show that the increase in corn cultivation required to meet the goal of 15-36 billion gallons of renewable fuels by the year 2022 suggested by a recent U.S. Senate energy policy would increase the annual average flux of dissolved inorganic nitrogen (DIN) export by the Mississippi and Atchafalaya Rivers by 10-34%. Generating 15 billion gallons of corn-based ethanol by the year 2022 will increase the odds that annual DIN export exceeds the target set for reducing hypoxia in the Gulf of Mexico to >95%. Examination of extreme mitigation options shows that expanding corn-based ethanol production would make the already difficult challenges of reducing nitrogen export to the Gulf of Mexico and the extent of hypoxia practically impossible without large shifts in food production and agricultural management.

  9. Reference dosimetry of proton pencil beams based on dose-area product: a proof of concept.

    Science.gov (United States)

    Gomà, Carles; Safai, Sairos; Vörös, Sándor

    2017-06-21

    This paper describes a novel approach to the reference dosimetry of proton pencil beams based on dose-area product ([Formula: see text]). It depicts the calibration of a large-diameter plane-parallel ionization chamber in terms of dose-area product in a 60 Co beam, the Monte Carlo calculation of beam quality correction factors-in terms of dose-area product-in proton beams, the Monte Carlo calculation of nuclear halo correction factors, and the experimental determination of [Formula: see text] of a single proton pencil beam. This new approach to reference dosimetry proves to be feasible, as it yields [Formula: see text] values in agreement with the standard and well-established approach of determining the absorbed dose to water at the centre of a broad homogeneous field generated by the superposition of regularly-spaced proton pencil beams.

  10. Technology Evaluation of Process Configurations for Second Generation Bioethanol Production using Dynamic Model-based Simulations

    DEFF Research Database (Denmark)

    Morales Rodriguez, Ricardo; Meyer, Anne S.; Gernaey, Krist

    2011-01-01

    An assessment of a number of different process flowsheets for bioethanol production was performed using dynamic model-based simulations. The evaluation employed diverse operational scenarios such as, fed-batch, continuous and continuous with recycle configurations. Each configuration was evaluated...... against the following benchmark criteria, yield (kg ethanol/kg dry-biomass), final product concentration and number of unit operations required in the different process configurations. The results has shown the process configuration for simultaneous saccharification and co-fermentation (SSCF) operating...... in continuous mode with a recycle of the SSCF reactor effluent, results in the best productivity of bioethanol among the proposed process configurations, with a yield of 0.18 kg ethanol /kg dry-biomass....

  11. Establishment of the carbon label mechanism of coal chemical products based oncarbon footprint

    Directory of Open Access Journals (Sweden)

    Wu Bishan

    Full Text Available ABSTRACT After redefining the carbon footprint and carbon label, the paper analyzesthe significance of the carbon labels under the background of the low carbon economy development, and establishes the concept of model of the carbon labels mechanism to chemical products. At the same time, the paper quantitatively studies carbon label data sourceof three kinds of coal chemical industry power products, which are fromhaving not CCS technologies of supercritical boiler of coal, using CCS technologies of supercritical boiler of coal and adopting CCS and IGCC technologies to power generation in CCI. Based on the three kinds of differences, the paper puts forward of establishing the carbon labels mechanism of chemical products under the low carbon consumption.

  12. A fuzzy ANP application for prioritizing the productivity factors based on university employees' counterproductive behaviors

    Directory of Open Access Journals (Sweden)

    Zahra Alipour Darvishi

    2014-07-01

    Full Text Available Measuring the relative efficiency of employee plays essential role on the success of any organization including universities. In this paper, we present a survey to detect and to prioritize important factors influencing on the productivity of employees who work for one of Iranian universities located in city of Tehran, Iran. The study also uses analytical network process to prioritize the factors. Based on the results of our survey, we have categorized effective productivity factors into three groups of research, educational and administration groups. In our survey, coherence and unity with no dispersion of the employee's duties, systematic job rotation and correct design communication job are among the most important factors influencing on employees’ productivity.

  13. Optimization of marine waste based-growth media for microbial lipase production using mixture design methodology.

    Science.gov (United States)

    Sellami, Mohamed; Kedachi, Samiha; Frikha, Fakher; Miled, Nabil; Ben Rebah, Faouzi

    2013-01-01

    Lipase production by Staphylococcus xylosus and Rhizopus oryzae was investigated using a culture medium based on a mixture of synthetic medium and supernatants generated from tuna by-products and Ulva rigida biomass. The proportion of the three medium components was optimized using the simplex-centroid mixture design method (SCMD). Results indicated that the experimental data were in good agreement with predicted values, indicating that SCMD was a reliable method for determining the optimum mixture proportion of the growth medium. Maximal lipase activities of 12.5 and 23.5 IU/mL were obtained with a 50:50 (v:v) mixture of synthetic medium and tuna by-product supernatant for Staphylococcus xylosus and Rhizopus oryzae, respectively. The predicted responses from these mixture proportions were also validated experimentally.

  14. Optimal processing pathway for the production of biodiesel from microalgal biomass: A superstructure based approach

    DEFF Research Database (Denmark)

    Rizwan, Muhammad; Lee, Jay H.; Gani, Rafiqul

    2013-01-01

    In this study, we propose a mixed integer nonlinear programming (MINLP) model for superstructure based optimization of biodiesel production from microalgal biomass. The proposed superstructure includes a number of major processing steps for the production of biodiesel from microalgal biomass......, such as the harvesting of microalgal biomass, pretreatments including drying and cell disruption of harvested biomass, lipid extraction, transesterification, and post-transesterfication purification. The proposed model is used to find the optimal processing pathway among the large number of potential pathways that exist...... for the production of biodiesel from microalgae. The proposed methodology is tested by implementing on a specific case with different choices of objective functions. The MINLP model is implemented and solved in GAMS using a database built in Excel. The results from the optimization are analyzed...

  15. From Family Based to Industrial Based Production: Local Economic Development Initiatives and the HELIX Model

    Directory of Open Access Journals (Sweden)

    Bartjan W Pennink

    2013-01-01

    Full Text Available To build a strong local economy, good practice tells us that each community should undertake a collaborative, strategically planned process to understand and then act upon its own strengths, weaknesses, opportunities and threats. From this perspective we start with the local communities but how is this related to the perspective from the Helix model in which three actors are explicitly introduced: the Government, the Industry and the Universities? The purpose of local economic development (LED is to build up the economic capacity of a local area to improve its economic future and the quality of life for all. To support  the Local Economic Development in remote areas,   a program  has been developed based on the LED frame work of the world bank. This approach and  the experiences over  the past years with this program are  described in the first part.  In the second part of the paper, We analyse work done with that program with the help of the social capital concept and the triple helix model.  In all cases it is important to pay attention to who is taken the initiative after the first move (and it is not always the governance as actor and for the triple helix we suggest  that the concepts of (national Government, Industry and University need a translation to Local Governance Agency, Cooperation or other ways of cooperation of local communities and Local Universities. Although a push from outside might help  a local region in development the endogenous factors are  also needed. Keywords: Triple Helix model, Local Economic Development, Local Actors, Double Triangle within the Helix Model

  16. Agent Behavior-Based Simulation Study on Mass Collaborative Product Development Process

    Directory of Open Access Journals (Sweden)

    Shuo Zhang

    2015-01-01

    Full Text Available Mass collaborative product development (MCPD benefits people by high innovation products with lower cost and shorter lead time due to quick development of group innovation, Internet-based customization, and prototype manufacturing. Simulation is an effective way to study the evolution process and therefore to guarantee the success of MCPD. In this paper, an agent behavior-based simulation approach of MCPD is developed, which models the MCPD process as the interactive process of design agents and the environment objects based on Complex Adaptive System (CAS theory. Next, the structure model of design agent is proposed, and the modification and collaboration behaviors are described. Third, the agent behavior-based simulation flow of MCPD is designed. At last, simulation experiments are carried out based on an engineering case of mobile phone design. The experiment results show the following: (1 the community scale has significant influence on MCPD process; (2 the simulation process can explicitly represent the modification and collaboration behaviors of design agents; (3 the community evolution process can be observed and analyzed dynamically based on simulation data.

  17. Systems-wide metabolic pathway engineering in Corynebacterium glutamicum for bio-based production of diaminopentane.

    Science.gov (United States)

    Kind, Stefanie; Jeong, Weol Kyu; Schröder, Hartwig; Wittmann, Christoph

    2010-07-01

    In the present work the Gram-positive bacterium Corynebacterium glutamicum was engineered into an efficient, tailor-made production strain for diaminopentane (cadaverine), a highly attractive building block for bio-based polyamides. The engineering comprised expression of lysine decarboxylase (ldcC) from Escherichia coli, catalyzing the conversion of lysine into diaminopentane, and systems-wide metabolic engineering of central supporting pathways. Substantially re-designing the metabolism yielded superior strains with desirable properties such as (i) the release from unwanted feedback regulation at the level of aspartokinase and pyruvate carboxylase by introducing the point mutations lysC311 and pycA458, (ii) an optimized supply of the key precursor oxaloacetate by amplifying the anaplerotic enzyme, pyruvate carboxylase, and deleting phosphoenolpyruvate carboxykinase which otherwise removes oxaloacetate, (iii) enhanced biosynthetic flux via combined amplification of aspartokinase, dihydrodipicolinate reductase, diaminopimelate dehydrogenase and diaminopimelate decarboxylase, and (iv) attenuated flux into the threonine pathway competing with production by the leaky mutation hom59 in the homoserine dehydrogenase gene. Lysine decarboxylase proved to be a bottleneck for efficient production, since its in vitro activity and in vivo flux were closely correlated. To achieve an optimal strain having only stable genomic modifications, the combination of the strong constitutive C. glutamicum tuf promoter and optimized codon usage allowed efficient genome-based ldcC expression and resulted in a high diaminopentane yield of 200 mmol mol(-1). By supplementing the medium with 1 mgL(-1) pyridoxal, the cofactor of lysine decarboxylase, the yield was increased to 300 mmol mol(-1). In the production strain obtained, lysine secretion was almost completely abolished. Metabolic analysis, however, revealed substantial formation of an as yet unknown by-product. It was identified as an

  18. Externalities of biomass based electricity production compared to power generation from coal in the Netherlands

    International Nuclear Information System (INIS)

    Faaij, A.; Meuleman, B.

    1997-12-01

    Externalities of electricity production from biomass and coal are investigated and compared for the Dutch context. Effects on economic activity and employment are investigated by means of Input/Output and multiplier tables. Valuations of damage from emissions to air are based on generic data from other studies. In addition, external costs are estimated for nitrogen leaching and for the use of agrochemicals for energy crop production. The average private costs for biomass and coal based power generation are projected to be 68 and 38 mECU/kWh respectively in the year 2005. It is assumed that biomass production takes place on fallow land. Coal mining is excluded from the analysis. If the quantified external damages and benefits are included the cost range for bio-electricity is 53-70 mECU/kWh and 45-72 mECU/kWh for coal. Indirect economic effects (increment of Gross Domestic Product) and the difference in CO2 emissions are the most important distinguishing factors between coal and biomass in economic terms. Damage costs of other emissions to air (NOx, SO2, dust and CO) are of the same order of magnitude for both coal and biomass (coal mining excluded). In this analysis environmental impacts of energy farming are compared mainly to fallow land focused on the use of fertilizers and agrochemicals. The related damage costs appear to be low but should be considered as a preliminary estimate only. The quantitative outcomes should not be considered as the external costs of the two fuel cycles studied. Many impacts have not been valued and large uncertainties persist e.g. with respect to the costs of climate change and numerous dose response relations. More detailed analysis is required with respect to macro-economic impacts. The results serve as a first indication, but the outcomes plead for the support of bio-electricity production and/or taxation of coal based power generation. 88 refs

  19. Benchmarking road safety of U.S. states: a DEA-based Malmquist productivity index approach.

    Science.gov (United States)

    Egilmez, Gokhan; McAvoy, Deborah

    2013-04-01

    In this study, a DEA based Malmquist index model was developed to assess the relative efficiency and productivity of U.S. states in decreasing the number of road fatalities. Even though the national trend in fatal crashes has reached to the lowest level since 1949 (Traffic Safety Annual Assessment Highlights, 2010), a state-by-state analysis and comparison has not been studied considering other characteristics of the holistic national road safety assessment problem in any work in the literature or organizational reports. In this study, a DEA based Malmquist index model was developed to assess the relative efficiency and productivity of 50 U.S. states in reducing the number of fatal crashes. The single output, fatal crashes, and five inputs were aggregated into single road safety score and utilized in the DEA-based Malmquist index mathematical model. The period of 2002-2008 was considered due to data availability for the inputs and the output considered. According to the results, there is a slight negative productivity (an average of -0.2 percent productivity) observed in the U.S. on minimizing the number of fatal crashes along with an average of 2.1 percent efficiency decline and 1.8 percent technological improvement. The productivity in reducing the fatal crashes can only be attributed to the technological growth since there is a negative efficiency growth is occurred. It can be concluded that even though there is a declining trend observed in the fatality rates, the efficiency of states in utilizing societal and economical resources towards the goal of zero fatality is not still efficient. More effective policy making towards increasing safety belt usage and better utilization of safety expenditures to improve road condition are derived as the key areas to focus on for state highway safety agencies from the scope of current research. Published by Elsevier Ltd.

  20. Antimicrobial peptide production and plant-based expression systems for medical and agricultural biotechnology.

    Science.gov (United States)

    Holaskova, Edita; Galuszka, Petr; Frebort, Ivo; Oz, M Tufan

    2015-11-01

    Antimicrobial peptides (AMPs) are vital components of the innate immune system of nearly all living organisms. They generally act in the first line of defense against various pathogenic bacteria, parasites, enveloped viruses and fungi. These low molecular mass peptides are considered prospective therapeutic agents due to their broad-spectrum rapid activity, low cytotoxicity to mammalian cells and unique mode of action which hinders emergence of pathogen resistance. In addition to medical use, AMPs can also be employed for development of innovative approaches for plant protection in agriculture. Conferred disease resistance by AMPs might help us surmount losses in yield, quality and safety of agricultural products due to plant pathogens. Heterologous expression in plant-based systems, also called plant molecular farming, offers cost-effective large-scale production which is regarded as one of the most important factors for clinical or agricultural use of AMPs. This review presents various types of AMPs as well as plant-based platforms ranging from cell suspensions to whole plants employed for peptide production. Although AMP production in plants holds great promises for medicine and agriculture, specific technical limitations regarding product yield, function and stability still remain. Additionally, establishment of particular stable expression systems employing plants or plant tissues generally requires extended time scale for platform development compared to certain other heterologous systems. Therefore, fast and promising tools for evaluation of plant-based expression strategies and assessment of function and stability of the heterologously produced AMPs are critical for molecular farming and plant protection. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. Optimal production of renewable hydrogen based on an efficient energy management strategy

    International Nuclear Information System (INIS)

    Ziogou, Chrysovalantou; Ipsakis, Dimitris; Seferlis, Panos; Bezergianni, Stella; Papadopoulou, Simira; Voutetakis, Spyros

    2013-01-01

    This work presents the development of a flexible energy management strategy (EMS) for a renewable hydrogen production unit through water electrolysis with solar power. The electricity flow of the unit is controlled by a smart microgrid and the overall unattended operation is achieved by a supervisory control system. The proposed approach formalizes the knowledge regarding the system operation using a finite-state machine (FSM) which is subsequently combined with a propositional-based logic to describe the transitions among various process states. The operating rules for the integrated system are derived by taking into account both the operating constraints and the interaction effects among the individual subsystems in a systematic way. Optimal control system parameter values are obtained so that a system performance criterion incorporating efficient and economic operation is satisfied. The resulted EMS has been deployed to the industrial automation system that monitors and controls a small-scale experimental solar hydrogen production unit. The overall performance of the proposed EMS in the experimental unit has been evaluated over short-term and long-term operating periods resulting in smooth and efficient hydrogen production. - Highlights: • Development of an energy management strategy based on a finite-state machine and propositional-based reasoning. • Deployment of the energy-aware algorithm to an autonomous renewable hydrogen production unit. • Supervisory control of the electricity flow by a smart microgrid using an industrial automation system. • Unattended operation and remote monitoring incorporating subsystem interactions in a systematic way. • Optimal hydrogen production regardless of the weather conditions through water electrolysis with solar power

  2. Ammonia production from amino acid-based biomass-like sources by engineered Escherichia coli.

    Science.gov (United States)

    Mikami, Yosuke; Yoneda, Hisanari; Tatsukami, Yohei; Aoki, Wataru; Ueda, Mitsuyoshi

    2017-12-01

    The demand for ammonia is expected to increase in the future because of its importance in agriculture, industry, and hydrogen transportation. Although the Haber-Bosch process is known as an effective way to produce ammonia, the process is energy-intensive. Thus, an environmentally friendly ammonia production process is desired. In this study, we aimed to produce ammonia from amino acids and amino acid-based biomass-like resources by modifying the metabolism of Escherichia coli. By engineering metabolic flux to promote ammonia production using the overexpression of the ketoisovalerate decarboxylase gene (kivd), derived from Lactococcus lactis, ammonia production from amino acids was 351 mg/L (36.6% yield). Furthermore, we deleted the glnA gene, responsible for ammonia assimilation. Using yeast extract as the sole source of carbon and nitrogen, the resultant strain produced 458 mg/L of ammonia (47.8% yield) from an amino acid-based biomass-like material. The ammonia production yields obtained are the highest reported to date. This study suggests that it will be possible to produce ammonia from waste biomass in an environmentally friendly process.

  3. Korean Ministry of Environment's web-based visual consumer product exposure and risk assessment system (COPER).

    Science.gov (United States)

    Lee, Hunjoo; Lee, Kiyoung; Park, Ji Young; Min, Sung-Gi

    2017-05-01

    With support from the Korean Ministry of the Environment (ME), our interdisciplinary research staff developed the COnsumer Product Exposure and Risk assessment system (COPER). This system includes various databases and features that enable the calculation of exposure and determination of risk caused by consumer products use. COPER is divided into three tiers: the integrated database layer (IDL), the domain specific service layer (DSSL), and the exposure and risk assessment layer (ERAL). IDL is organized by the form of the raw data (mostly non-aggregated data) and includes four sub-databases: a toxicity profile, an inventory of Korean consumer products, the weight fractions of chemical substances in the consumer products determined by chemical analysis and national representative exposure factors. DSSL provides web-based information services corresponding to each database within IDL. Finally, ERAL enables risk assessors to perform various exposure and risk assessments, including exposure scenario design via either inhalation or dermal contact by using or organizing each database in an intuitive manner. This paper outlines the overall architecture of the system and highlights some of the unique features of COPER based on visual and dynamic rendering engine for exposure assessment model on web.

  4. Plant response-based sensing for control starategies in sustainable greenhouse production

    International Nuclear Information System (INIS)

    Kacira, M.; Sase, S.; Okushima, L.; Ling, P.P.

    2005-01-01

    The effect of environmental variability is one of the major concerns in experimental design for both research in plant systems and greenhouse plant production. Microclimates surrounding plants are not usually uniform. Therefore, many samples and sensors are required to obtain a true representation of the plant population. A plant monitoring system capable of reducing the required number of samples by reducing environmental variability would be more advantageous. To better understand plant-environment interaction, it is essential to study plants, microclimate surrounding the plants and the growth media. To achieve this, the monitoring system must be equipped with proper instrumentation. To achieve proper management practices and sustainable greenhouse production, it is essential first to understand plants and their interactions with their surroundings and then establish plant response-based sensing and control strategies for greenhouse processes. Therefore, an effort was conducted to review and discuss current sensing and control strategies in greenhouse research and plant production and provide recommendations on plant response-based sensing and control strategies for sustainable greenhouse production

  5. A Rough VIKOR-Based QFD for Prioritizing Design Attributes of Product-Related Service

    Directory of Open Access Journals (Sweden)

    Xiuzhen Li

    2016-01-01

    Full Text Available Many manufacturers today are striving to offer high value-added product-related services (PRS due to increasing competition and environmental pressure. PRS can reduce the negative impact on the environment, because it extends the life of products and minimizes the cost. Product and service planning has been considered as the critical factor to the success of PRS. Quality function deployment (QFD has been recognized as an efficient planning tool which can convert customer needs (CNs into design attributes of PRS involving product attributes (PAs and service attributes (SAs. However, the subjective and vague information in the design of PRS with QFD may lead to inaccurate priority of PAs and SAs. To solve this problem, a novel rough VIKOR- (VIseKriterijumska Optimizaciji I Kompromisno Resenje- based QFD is proposed. The proposed approach integrates the strength of rough number (RN in manipulating vague concepts with less a priori information and the merit of VIKOR in structuring framework of compromise decision-making. Finally, an application in compressor-based service design is presented to illustrate the potential of the proposed method.

  6. A Network-Based Approach to Modeling and Predicting Product Coconsideration Relations

    Directory of Open Access Journals (Sweden)

    Zhenghui Sha

    2018-01-01

    Full Text Available Understanding customer preferences in consideration decisions is critical to choice modeling in engineering design. While existing literature has shown that the exogenous effects (e.g., product and customer attributes are deciding factors in customers’ consideration decisions, it is not clear how the endogenous effects (e.g., the intercompetition among products would influence such decisions. This paper presents a network-based approach based on Exponential Random Graph Models to study customers’ consideration behaviors according to engineering design. Our proposed approach is capable of modeling the endogenous effects among products through various network structures (e.g., stars and triangles besides the exogenous effects and predicting whether two products would be conisdered together. To assess the proposed model, we compare it against the dyadic network model that only considers exogenous effects. Using buyer survey data from the China automarket in 2013 and 2014, we evaluate the goodness of fit and the predictive power of the two models. The results show that our model has a better fit and predictive accuracy than the dyadic network model. This underscores the importance of the endogenous effects on customers’ consideration decisions. The insights gained from this research help explain how endogenous effects interact with exogeous effects in affecting customers’ decision-making.

  7. Novel Fission-Product Separation Based on Room-Temperature Ionic Liquids

    International Nuclear Information System (INIS)

    Rogers, Robin D.

    2004-01-01

    This project has demonstrated that Sr2+ and Cs+ can be selectively extracted from aqueous solutions into ionic liquids using crown ethers and that unprecedented large distribution coefficients can be achieved for these fission products. The volume of secondary wastes can be significantly minimized with this new separation technology. Through the current EMSP funding, the solvent extraction technology based on ionic liquids has been shown to be viable and can potentially provide the most efficient separation of problematic fission products from high level wastes. The key results from the current funding period are the development of highly selective extraction process for cesium ions based on crown ethers and calixarenes, optimization of selectivities of extractants via systematic change of ionic liquids, and investigation of task-specific ionic liquids incorporating both complexant and solvent characteristics

  8. Enabling the Tablet Product Development of 5-Fluorocytosine by Conjugate Acid Base Cocrystals.

    Science.gov (United States)

    Perumalla, Sathyanarayana R; Paul, Shubhajit; Sun, Changquan C

    2016-06-01

    5-Fluorocytosine (FC) is a high-dose antifungal drug that challenges the development of a tablet product due to poor solid-state stability and tabletability. Using 2 pharmaceutically acceptable conjugate acid base (CAB) cocrystals of FC with HCl and acesulfame, we have developed commercially viable high loading FC tablets. The tablets were prepared by direct compression using nano-coated microcrystalline cellulose Avicel PH105 as a tablet binder, which provided both excellent tabletability and good flowability. Commercial manufacturability of formulations based on both CAB cocrystals was verified on a compaction simulator. The results from an expedited friability study were used to set the compaction force, which yielded tablets with sufficient mechanical strength and rapid tablet disintegration. This work demonstrates the potential value of CAB cocrystals in drug product development. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  9. Recent advances in bio-based multi-products of agricultural Jerusalem artichoke resources.

    Science.gov (United States)

    Qiu, Yibin; Lei, Peng; Zhang, Yatao; Sha, Yuanyuan; Zhan, Yijing; Xu, Zongqi; Li, Sha; Xu, Hong; Ouyang, Pingkai

    2018-01-01

    The Jerusalem artichoke is a perennial plant that belongs to the sunflower family. As a non-grain crop, Jerusalem artichoke possesses a number of desirable characteristics that make it a valuable feedstock for biorefinery, such as inulin content, rapid growth, strong adaptability, and high yields. This review provides a comprehensive introduction to renewable Jerusalem artichoke-based biomass resources and recent advances in bio-based product conversion. Furthermore, we discuss the latest in the development of inulinase-producing microorganisms and enhanced inulin hydrolysis capacity of microbes by genetic engineering, which lead to a more cost-effective Jerusalem artichoke biorefinery. The review is aimed at promoting Jerusalem artichoke industry and new prospects for higher value-added production.

  10. Phenomena Based Process Intensification of Toluene Methylation for Sustainable Para-xylene Production

    DEFF Research Database (Denmark)

    Anantasarn, Nateetorn; Babi, Deenesh Kavi; Suriyapraphadilok, Uthaiporn

    2016-01-01

    The objective of this work is to generate more sustainable intensified process designs for the production of important chemicals in the petrochemical sector. A 3-stage approach is applied. In stage 1, the base case design is generated or selected from literature. In stage 2, the base case design...... is analysed in terms of economics, sustainability and LCA factors in order to identify process hot-spots that are translated into design targets. In stage 3, intensified flowsheet alternatives are generated that match the targets and thereby eliminate and/or minimize the process hot-spots using a phenomena...... operations to generate more sustainable designs. An overview of the key concepts and framework are presented together with the results from a case study highlighting the application of the framework to the sustainable design of a production process for para-xylene, which is an important chemical utilized...

  11. The Knowledge Sharing Based on PLIB Ontology and XML for Collaborative Product Commerce

    Science.gov (United States)

    Ma, Jun; Luo, Guofu; Li, Hao; Xiao, Yanqiu

    Collaborative Product Commerce (CPC) has become a brand-new commerce mode for manufacture. In order to promote information communication with each other more efficiently in CPC, a knowledge-sharing framework based on PLIB (ISO 13584) ontology and XML was presented, and its implementation method was studied. At first, according to the methodology of PLIB (ISO 13584), a common ontology—PLIB ontology was put forward which provide a coherent conceptual meaning within the context of CPC domain. Meanwhile, for the sake of knowledge intercommunion via internet, the PLIB ontology formalization description by EXPRESS mode was converted into XML Schema, and two mapping methods were presented: direct mapping approach and meta-levels mapping approach, while the latter was adopted. Based on above work, a parts resource knowledge-sharing framework (CPC-KSF) was put forward and realized, which has been applied in the process of automotive component manufacturing collaborative product commerce.

  12. Product line based ontology reuse in context-aware e-business environment

    DEFF Research Database (Denmark)

    Zhang, Weishan; Kunz, Thomas

    2006-01-01

    Improving the reusability of ontology is recognized as increasingly important due to the prevalence of OWL research and applications. But there exists no convincing methodology and tool support in this direction yet. In this paper, we apply ideas from the research and practice with software product...... lines in order to explore this issue. The ontology is developed and managed according to the commonalities and variabilities underlying a specific problem domain. Meta-ontology is used in order to improve the reusability, evolve-ability and customizability of ontology. Another advantage is being able...... to generate needed ontology with the created meta-ontology implemented with XVCL (XML based Variant Configuration Language) technology. We demonstrate our product line based reuse approach with an example B2C application....

  13. Analysis of the potential for sustainable, cassava-based bioethanol production in Mali

    DEFF Research Database (Denmark)

    Rasmussen, Kjeld; Bruun, Thilde Bech; Birch-Thomsen, Torben

    and solar resources in Mali 5) Screening of feasible applications of wind and solar energy in Mali: Assessment using the wind and solar maps for Mali The project is being carried out by a group of university departments, research institutions and consultants led by the UNEP Risø Centre (URC......The present project is covered in five main reports: 1) Analyses of the potential for sustainable, cassava-based bio-ethanol production in Mali 2) Agricultural residues for energy production in Mali 3) Pre-feasibility study for an electric power plant based on rice straw 4) Estimation of wind......) at the Technical University of Denmark (DTU) and conducted in cooperation with Direction Nationale de l’Energie (DNE) and Centre National de l’Energie Solaire et des Energies Renouvelables (CNESOLER) in Mali. The subcontracted institutions comprise Geographic Resource Analysis & Science A/S (GRAS), Department...

  14. Conservation agriculture practices in rainfed uplands of India improve maize-based system productivity and profitability

    Directory of Open Access Journals (Sweden)

    Aliza Pradhan

    2016-07-01

    Full Text Available Traditional agriculture in rainfed uplands of India has been experiencing low agricultural productivity as the lands suffer from poor soil fertility, susceptibility to water erosion and other external pressures of development and climate change. A shift towards more sustainable cropping systems such as conservation agriculture production systems (CAPS may help in maintaining soil quality as well as improving crop production and farmer’s net economic benefit. This research assessed the effects over three years (2011-2014 of reduced tillage, intercropping, and cover cropping practices customized for maize-based production systems in upland areas of Odisha, India. The study focused on crop yield, system productivity and profitability through maize equivalent yield and dominance analysis. Results showed that maize grain yield did not differ significantly over time or among CAPS treatments while cowpea yield was considered as an additional yield in intercropping systems. Mustard and horsegram grown in plots after maize cowpea intercropping recorded higher grain yields of 25 and 37%, respectively, as compared to those without intercropping. Overall, the full CAPS implementation i.e. minimum tillage, maize-cowpea intercropping and mustard residue retention had significantly higher system productivity and net benefits than traditional farmer practices, i.e. conventional tillage, sole maize cropping, and no mustard residue retention. The dominance analysis demonstrated increasing benefits of combining conservation practices that exceeded thresholds for farmer adoption. Given the use of familiar crops and technologies and the magnitude of yield and income improvements, these types of CAPS should be acceptable and attractive for smallholder farmers in the area. This in turn should support a move toward sustainable intensification of crop production to meet future household income and nutritional needs.

  15. Conservation Agriculture Practices in Rainfed Uplands of India Improve Maize-Based System Productivity and Profitability

    Science.gov (United States)

    Pradhan, Aliza; Idol, Travis; Roul, Pravat K.

    2016-01-01

    Traditional agriculture in rainfed uplands of India has been experiencing low agricultural productivity as the lands suffer from poor soil fertility, susceptibility to water erosion and other external pressures of development and climate change. A shift toward more sustainable cropping systems such as conservation agriculture production systems (CAPSs) may help in maintaining soil quality as well as improving crop production and farmer’s net economic benefit. This research assessed the effects over 3 years (2011–2014) of reduced tillage, intercropping, and cover cropping practices customized for maize-based production systems in upland areas of Odisha, India. The study focused on crop yield, system productivity and profitability through maize equivalent yield and dominance analysis. Results showed that maize grain yield did not differ significantly over time or among CAPS treatments while cowpea yield was considered as an additional yield in intercropping systems. Mustard and horsegram grown in plots after maize cowpea intercropping recorded higher grain yields of 25 and 37%, respectively, as compared to those without intercropping. Overall, the full CAPS implementation, i.e., minimum tillage, maize–cowpea intercropping and mustard residue retention had significantly higher system productivity and net benefits than traditional farmer practices, i.e., conventional tillage, sole maize cropping, and no mustard residue retention. The dominance analysis demonstrated increasing benefits of combining conservation practices that exceeded thresholds for farmer adoption. Given the use of familiar crops and technologies and the magnitude of yield and income improvements, these types of CAPS should be acceptable and attractive for smallholder farmers in the area. This in turn should support a move toward sustainable intensification of crop production to meet future household income and nutritional needs. PMID:27471508

  16. Conservation Agriculture Practices in Rainfed Uplands of India Improve Maize-Based System Productivity and Profitability.

    Science.gov (United States)

    Pradhan, Aliza; Idol, Travis; Roul, Pravat K

    2016-01-01

    Traditional agriculture in rainfed uplands of India has been experiencing low agricultural productivity as the lands suffer from poor soil fertility, susceptibility to water erosion and other external pressures of development and climate change. A shift toward more sustainable cropping systems such as conservation agriculture production systems (CAPSs) may help in maintaining soil quality as well as improving crop production and farmer's net economic benefit. This research assessed the effects over 3 years (2011-2014) of reduced tillage, intercropping, and cover cropping practices customized for maize-based production systems in upland areas of Odisha, India. The study focused on crop yield, system productivity and profitability through maize equivalent yield and dominance analysis. Results showed that maize grain yield did not differ significantly over time or among CAPS treatments while cowpea yield was considered as an additional yield in intercropping systems. Mustard and horsegram grown in plots after maize cowpea intercropping recorded higher grain yields of 25 and 37%, respectively, as compared to those without intercropping. Overall, the full CAPS implementation, i.e., minimum tillage, maize-cowpea intercropping and mustard residue retention had significantly higher system productivity and net benefits than traditional farmer practices, i.e., conventional tillage, sole maize cropping, and no mustard residue retention. The dominance analysis demonstrated increasing benefits of combining conservation practices that exceeded thresholds for farmer adoption. Given the use of familiar crops and technologies and the magnitude of yield and income improvements, these types of CAPS should be acceptable and attractive for smallholder farmers in the area. This in turn should support a move toward sustainable intensification of crop production to meet future household income and nutritional needs.

  17. Climatic factors controlling the productivity of pine stands. A model-based analysis

    International Nuclear Information System (INIS)

    McMurtrie, R.E.; Gholz, H.L.; Linder, S.; Gower, S.T.

    1994-01-01

    A process-based forest growth model, BIOMASS, is applied to stands of four pine species (Pinus elliottii, P. radiata, P. resinosa, and P. sylvestris) growing in five sub-tropical, temperate and boreal environments (in Australia, New Zealand, Florida, Sweden and Wisconsin). Measured annual above-ground net primary production (ANPP) at these sites ranges from 0.2 to 1.6 kg C m -2 . After establishing that simulated ANPP closely matches biomass production measured for the various stands, we analyse model runs to relate simulated productivity to absorbed photosynthetically-active radiation (APAR). Annual photosynthetic productivity (or gross primary production, GPP) simulated for the five stands is linearly related to utilizable APAR, derived by estimating the extent to which photosynthesis is limited by soil water deficit, high air saturation vapor deficit or low temperature. The reduction of GPP due to incomplete radiation interception is 10 to 25% for stands with high leaf area index (LAI) in Australia, New Zealand and Wisconsin and 50 to 60% for low LAI stands in Florida and Sweden. Gross carbon gain is reduced by a further 50 to 70% at sites experiencing cold winters (Sweden and Wisconsin), summer drought (Australia) or high summer humidity deficits (Australia and Wisconsin). Simulated carbon losses due to above-ground respiration average 50% of GPP, but are highly variable among the sites due to large differences in live biomass and tissue nitrogen concentrations. This results in a weaker relationship between simulated NPP and APAR. (au) 93 refs

  18. The Potential in Bioethanol Production From Waste Fiber Sludges in Pulp Mill-Based Biorefineries

    Science.gov (United States)

    Sjöde, Anders; Alriksson, Björn; Jönsson, Leif J.; Nilvebrant, Nils-Olof

    Industrial production of bioethanol from fibers that are unusable for pulp production in pulp mills offers an approach to product diversification and more efficient exploitation of the raw material. In an attempt to utilize fibers flowing to the biological waste treatment, selected fiber sludges from three different pulp mills were collected, chemically analyzed, enzymatically hydrolyzed, and fermented for bioethanol production. Another aim was to produce solid residues with higher heat values than those of the original fiber sludges to gain a better fuel for combustion. The glucan content ranged between 32 and 66% of the dry matter. The lignin content varied considerably (1-25%), as did the content of wood extractives (0.2-5.8%). Hydrolysates obtained using enzymatic hydrolysis were found to be readily fermentable using Saccharomyces cerevisiae. Hydrolysis resulted in improved heat values compared with corresponding untreated fiber sludges. Oligomeric xylan fragments in the solid residue obtained after enzymatic hydrolysis were identified using matrix-assisted laser desorption ionization-time of flight and their potential as a new product of a pulp mill-based biorefinery is discussed.

  19. Dropwise additive manufacturing of pharmaceutical products for melt-based dosage forms.

    Science.gov (United States)

    Içten, Elçin; Giridhar, Arun; Taylor, Lynne S; Nagy, Zoltan K; Reklaitis, Gintaras V

    2015-05-01

    The US Food and Drug Administration introduced the quality by design approach and process analytical technology guidance to encourage innovation and efficiency in pharmaceutical development, manufacturing, and quality assurance. As part of this renewed emphasis on the improvement of manufacturing, the pharmaceutical industry has begun to develop more efficient production processes with more intensive use of online measurement and sensing, real-time quality control, and process control tools. Here, we present dropwise additive manufacturing of pharmaceutical products (DAMPP) as an alternative to conventional pharmaceutical manufacturing methods. This mini-manufacturing process for the production of pharmaceuticals utilizes drop on demand printing technology for automated and controlled deposition of melt-based formulations onto edible substrates. The advantages of drop-on-demand technology, including reproducible production of small droplets, adjustable drop sizing, high placement accuracy, and flexible use of different formulations, enable production of individualized dosing even for low-dose and high-potency drugs. In this work, DAMPP is used to produce solid oral dosage forms from hot melts of an active pharmaceutical ingredient and a polymer. The dosage forms are analyzed to show the reproducibility of dosing and the dissolution behavior of different formulations. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

  20. Bio-based and biodegradable plastics for use in crop production.

    Science.gov (United States)

    Riggi, Ezio; Santagata, Gabriella; Malinconico, Mario

    2011-01-01

    The production and management of crops uses plastics for many applications (e.g., low tunnels, high tunnels, greenhouses, mulching, silage bags, hay bales, pheromone traps, coatings of fertilizers or pesticides or hormones or seeds, and nursery pots and containers for growing transplants). All these applications have led some authors to adopt the term "plasticulture" when discussing the use of plastic materials in agriculture and related industries. Unfortunately, the sustainability of this use of plastics is low, and renewability and degradability have become key words in the debate over sustainable production and utilization of plastic. Recently, researchers and the plastics industry have made strong efforts (i) to identify new biopolymers and natural additives from renewable sources that can be used in plastics production and (ii) to enhance the degradability (biological or physical) of the new ecologically sustainable materials. In the present review, we describe the main research results, current applications, patents that have been applied for in the last two decades, and future perspectives on sustainable use of plastics to support crop production. The article presents some promising patents on bio-based and biodegradable plastics for use in crop production.

  1. Examining air pollution in China using production- and consumption-based emissions accounting approaches.

    Science.gov (United States)

    Huo, Hong; Zhang, Qiang; Guan, Dabo; Su, Xin; Zhao, Hongyan; He, Kebin

    2014-12-16

    Two important reasons for China's air pollution are the high emission factors (emission per unit of product) of pollution sources and the high emission intensity (emissions per unit of GDP) of the industrial structure. Therefore, a wide variety of policy measures, including both emission abatement technologies and economic adjustment, must be implemented. To support such measures, this study used the production- and consumption-based emissions accounting approaches to simulate the SO2, NOx, PM2.5, and VOC emissions flows among producers and consumers. This study analyzed the emissions and GDP performance of 36 production sectors. The results showed that the equipment, machinery, and devices manufacturing and construction sectors contributed more than 50% of air pollutant emissions, and most of their products were used for capital formation and export. The service sector had the lowest emission intensities, and its output was mainly consumed by households and the government. In China, the emission intensities of production activities triggered by capital formation and export were approximately twice that of the service sector triggered by final consumption expenditure. This study suggests that China should control air pollution using the following strategies: applying end-of-pipe abatement technologies and using cleaner fuels to further decrease the emission factors associated with rural cooking, electricity generation, and the transportation sector; continuing to limit highly emission-intensive but low value-added exports; developing a plan to reduce construction activities; and increasing the proportion of service GDP in the national economy.

  2. Medicinal Plants Based Products Tested on Pathogens Isolated from Mastitis Milk

    Directory of Open Access Journals (Sweden)

    Claudia Pașca

    2017-09-01

    Full Text Available Bovine mastitis a major disease that is commonly associated with bacterial infection. The common treatment is with antibiotics administered intramammary into infected quarters of the udder. The excessive use of antibiotics leads to multidrug resistance and associated risks for human health. In this context, the search for alternative drugs based on plants has become a priority in livestock medicine. These products have a low manufacturing cost and no reports of antimicrobial resistance to these have been documented. In this context, the main objective of this study was to determine the antimicrobial effect of extracts and products of several indigenous, or acclimatized plants on pathogens isolated from bovine mastitis. A total of eleven plant alcoholic extracts and eight plant-derived products were tested against 32 microorganisms isolated from milk. The obtained results have shown an inhibition of bacterial growth for all tested plants, with better results for Evernia prunastri, Artemisia absinthium, and Lavandula angustifolia. Moreover, E. prunastri, Populus nigra, and L. angustifolia presented small averages of minimum inhibitory and bactericidal concentrations. Among the plant-derived products, three out of eight have shown a strong anti-microbial effect comparable with the effect of florfenicol and enrofloxacin, and better than individual plant extracts possibly due to synergism. These results suggest an important anti-microbial effect of these products on pathogens isolated from bovine mastitis with a possible applicability in this disease.

  3. Research on test of product based on spatial sampling criteria and variable step sampling mechanism

    Science.gov (United States)

    Li, Ruihong; Han, Yueping

    2014-09-01

    This paper presents an effective approach for online testing the assembly structures inside products using multiple views technique and X-ray digital radiography system based on spatial sampling criteria and variable step sampling mechanism. Although there are some objects inside one product to be tested, there must be a maximal rotary step for an object within which the least structural size to be tested is predictable. In offline learning process, Rotating the object by the step and imaging it and so on until a complete cycle is completed, an image sequence is obtained that includes the full structural information for recognition. The maximal rotary step is restricted by the least structural size and the inherent resolution of the imaging system. During online inspection process, the program firstly finds the optimum solutions to all different target parts in the standard sequence, i.e., finds their exact angles in one cycle. Aiming at the issue of most sizes of other targets in product are larger than that of the least structure, the paper adopts variable step-size sampling mechanism to rotate the product specific angles with different steps according to different objects inside the product and match. Experimental results show that the variable step-size method can greatly save time compared with the traditional fixed-step inspection method while the recognition accuracy is guaranteed.

  4. An integrated factor analysis model for product eco-design based on full life cycle assessment

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Z.; Xiao, T.; Li, D.

    2016-07-01

    Among the methods of comprehensive analysis for a product or an enterprise, there exist defects and deficiencies in traditional standard cost analyses and life cycle assessment methods. For example, some methods only emphasize one dimension (such as economic or environmental factors) while neglecting other relevant dimensions. This paper builds a factor analysis model of resource value flow, based on full life cycle assessment and eco-design theory, in order to expose the relevant internal logic between these two factors. The model considers the efficient multiplication of resources, economic efficiency, and environmental efficiency as its core objectives. The model studies the status of resource value flow during the entire life cycle of a product, and gives an in-depth analysis on the mutual logical relationship of product performance, value, resource consumption, and environmental load to reveal the symptoms and potentials in different dimensions. This provides comprehensive, accurate and timely decision-making information for enterprise managers regarding product eco-design, as well as production and management activities. To conclude, it verifies the availability of this evaluation and analysis model using a Chinese SUV manufacturer as an example. (Author)

  5. Environmental and economic suitability of forest biomass-based bioenergy production in the Southern United States

    Science.gov (United States)

    Dwivedi, Puneet

    of ethanol produced at the mill was found to be 3.2. The unit cost of production of ethanol was estimated to be $2.05 per gasoline gallon energy equivalent. The study also found that the emerging bioenergy and voluntary carbon markets will significantly increase land expectation values and, thus, the profitability of landowners. Results suggest that the optimal rotation age is insensible to alternate management scenarios. Finally, it was found that all stakeholder groups perceive that the overall benefits of forest biomass-based bioenergy development were higher than its weaknesses.

  6. Process systems engineering studies for catalytic production of bio-based platform molecules from lignocellulosic biomass

    International Nuclear Information System (INIS)

    Han, Jeehoon

    2017-01-01

    Highlights: • A process-systems engineering study for production of bio-based platform molecules to is presented. • Experimentally verified catalysis studies for biomass conversion are investigated. • New separations for effective recovery of bio-based platform molecules are developed. • Separations are integrated with catalytic biomass conversions. • Proposed process can compete economically with the current production approaches. - Abstract: This work presents a process-system engineering study of an integrated catalytic conversion strategy to produce bio-based platform molecules (levulinic acid (LA), furfural (FF), and propyl guaiacol (PG)) from hemicellulose (C_5), cellulose (C_6), and lignin fractions of lignocellulosic biomass. A commercial-scale process based on the strategy produces high numerical carbon yields (overall yields: 35.2%; C_6-to-LA: 20.4%, C_5-to-FF: 69.2%, and Lignin-to-PG: 13.3%) from a dilute concentration of solute (1.3–30.0 wt.% solids), but a high recovery of these molecules requires an efficient separation system with low energy requirement. A heat exchanger network significantly reduced the total energy requirements of the process. An economic analysis showed that the minimum selling price of LA as the highest value-added product (42.3 × 10"3 t of LA/y using 700 × 10"3 dry t/y of corn stover) is US$1707/t despite using negative economic parameters, and that this system can be cost-competitive with current production approaches.

  7. Switchgrass-Based Bioethanol Productivity and Potential Environmental Impact from Marginal Lands in China

    Directory of Open Access Journals (Sweden)

    Xun Zhang

    2017-02-01

    Full Text Available Switchgrass displays an excellent potential to serve as a non-food bioenergy feedstock for bioethanol production in China due to its high potential yield on marginal lands. However, few studies have been conducted on the spatial distribution of switchgrass-based bioethanol production potential in China. This study created a land surface process model (Environmental Policy Integrated Climate GIS (Geographic Information System-based (GEPIC model coupled with a life cycle analysis (LCA to explore the spatial distribution of potential bioethanol production and present a comprehensive analysis of energy efficiency and environmental impacts throughout its whole life cycle. It provides a new approach to study the bioethanol productivity and potential environmental impact from marginal lands based on the high spatial resolution GIS data, and this applies not only to China, but also to other regions and to other types of energy plant. The results indicate that approximately 59 million ha of marginal land in China are suitable for planting switchgrass, and 22 million tons of ethanol can be produced from this land. Additionally, a potential net energy gain (NEG of 1.75 x 106 million MJ will be achieved if all of the marginal land can be used in China, and Yunnan Province offers the most significant one that accounts for 35% of the total. Finally, this study obtained that the total environmental effect index of switchgrass-based bioethanol is the equivalent of a population of approximately 20,300, and a reduction in the global warming potential (GWP is the most significant environmental impact.

  8. Biodiesel production by using lipase immobilized onto novel silica-based hybrid foams

    Energy Technology Data Exchange (ETDEWEB)

    Brun, Nicolas [Centre de Recherche Paul Pascal, Pessac (France); Institut des Sciences Moleculaires, Talence (France); Garcia, Annick Babeau; Oestreicher, Victor; Durand, Fabien; Backov, Renal [Centre de Recherche Paul Pascal, Pessac (France); Deleuze, Herve [Institut des Sciences Moleculaires, Talence (France); Laurent, Guillaume; Sanchez, Clement [Laboratoire de Chimie de la Matiere Condensee, Paris (France)

    2010-07-01

    The covalent immobilization of crude lipases within silica-based macroporous frameworks have been performed by combining sol-gel process, concentrated direct emulsion, lyotropic mesophase and post-synthesis functionalizations. The assynthesized open cell hybrid monoliths exhibit high macroscopic porosity, around 90%, providing interconnected scaffold while reducing the diffusion low kinetic issue. The entrapment of enzymes in such foams deals with a high stability over esterification of fatty acids, hydrolysis of triglycerides (not shown herein) and biodiesel production by transesterification. (orig.)

  9. Design and application of natural product derived probes for activity based protein profiling

    OpenAIRE

    Battenberg, Oliver Alexander

    2015-01-01

    The identification of new antibacterial protein targets by activity based protein profiling (ABPP) is an important approach to face the increasing emergence of resistant bacteria. The scope of this work focuses on three new strategies for the labeling of antibacterial protein-targets with natural product derived ABPP-probes: A.) Evaluation of the intrinsic photo-reactivity of α-pyrones and pyrimidones for use as photo-crosslinkers. B.) Synthesis of a benzophenone-tag that combines photo-cross...

  10. Quantification of Plasmodiophora brassicae Using a DNA-Based Soil Test Facilitates Sustainable Oilseed Rape Production

    OpenAIRE

    Ann-Charlotte Wallenhammar; Albin Gunnarson; Fredrik Hansson; Anders Jonsson

    2016-01-01

    Outbreaks of clubroot disease caused by the soil-borne obligate parasite Plasmodiophora brassicae are common in oilseed rape (OSR) in Sweden. A DNA-based soil testing service that identifies fields where P. brassicae poses a significant risk of clubroot infection is now commercially available. It was applied here in field surveys to monitor the prevalence of P. brassicae DNA in field soils intended for winter OSR production and winter OSR field experiments. In 2013 in Scania, prior to plantin...

  11. Applying Behavioral Economics Concepts in Designing Usage-Based Car Insurance Products

    OpenAIRE

    Greenberg, Allen

    2010-01-01

    Behavioral economics, a discipline combining economics and psychology to explain consumer decision making, offers insights on how best to institute transportation pricing in a manner that is acceptable to drivers and also meets public policy objectives. As an example of how to use this relatively new discipline to enhance the acceptance and benefits of transportation pricing, its application to designing usage-based or pay-as-you-drive-and-you-save (PAYDAYS) insurance products is explored. Sp...

  12. Increasing EFL Learners’ Oral Production at a Public School Through Project-Based Learning

    Directory of Open Access Journals (Sweden)

    Ady Marcela Vaca Torres

    2017-07-01

    Full Text Available This research study examined how a group of ninth graders enhanced the speaking skill in an English as a foreign language classroom through project-based learning. Data about the experience were collected through field notes, transcripts of learners’ oral performance, and one interview. Grounded theory was implemented for data analysis, out of which three main findings emerged: (1 project-based learning encouraged students to increase oral production through lexical competence development, (2 helped them to overcome fears of speaking in L2, and (3, increased their interest in learning about their school life and community.

  13. Generic multiset programming with discrimination-based joins and symbolic Cartesian products

    DEFF Research Database (Denmark)

    Henglein, Fritz; Larsen, Ken Friis

    2010-01-01

    This paper presents GMP, a library for generic, SQL-style programming with multisets. It generalizes the querying core of SQL in a number of ways: Multisets may contain elements of arbitrary first-order data types, including references (pointers), recur- sive data types and nested multisets......: symbolic (term) repre- sentations of multisets, specifically for Cartesian products, for facilitating dynamic symbolic computation, which intersperses algebraic simplification steps with conventional data pro- cessing; and discrimination-based joins, a generic technique for computing equijoins based...

  14. Non-destructive monitoring of agricultural product (lettuce [Lactuca sativa]) based on laser-induced fluorescence

    International Nuclear Information System (INIS)

    Ishizawa, H.; Saito, Y.; Amemiya, T.; Komatu, K.

    2002-01-01

    Quality control of agricultural products in process of cultivation and distribution has become an important problem. This paper describes a field measuring method of lettuce based on laser induced fluorescence (LIF) spectroscopy for growth monitoring. Intensity at 460nm of LIF spectra showed characteristic variations of near harvest time. The results of chemical analysis confirmed that sucrose and chlorogenic acid are origins of the 460nm fluorescence. The prediction of harvest time and the possibility of quality monitoring are discussed based on the experimental data

  15. MODIS-based global terrestrial estimates of gross primary productivity and evapotranspiration

    Science.gov (United States)

    Ryu, Y.; Baldocchi, D. D.; Kobayashi, H.; Li, J.; van Ingen, C.; Agarwal, D.; Jackson, K.; Humphrey, M.

    2010-12-01

    We propose a novel approach to quantify gross primary productivity (GPP) and evapotranspiration (ET) at global scale (5 km resolution with 8-day interval). The MODIS-based, process-oriented approach couples photosynthesis, evaporation, two-leaf energy balance and nitrogen, which are different from the previous satellite-based approaches. We couple information from MODIS with flux towers to assess the drivers and parameters of GPP and ET. Incoming shortwave radiation components (direct and diffuse PAR, NIR) under all sky condition are modeled using a Monte-Carlo based atmospheric radiative transfer model. The MODIS Level 2 Atmospheric products are gridded and overlaid with MODIS Land products to produce spatially compatible forcing variables. GPP is modeled using a two-leaf model (sunlit and shaded leaf) and the maximum carboxylation rate is estimated using albedo-Nitrogen-leaf trait relations. The GPP is used to calculate canopy conductance via Ball-Berry model. Then, we apply Penman-Monteith equation to calculate evapotranspiration. The process-oriented approach allows us to investigate the main drivers of GPP and ET at global scale. Finally we explore the spatial and temporal variability of GPP and ET at global scale.

  16. Accessories modifying based on plastic waste of shampoo bottle as home economic product

    Science.gov (United States)

    Setyowati, Erna; Sukesi, Siti

    2018-03-01

    Plastic is a waste that can not decompose by the soil and if its left without a good handling can pollute the environment. Plastic waste needs processing by the recycle bottles principle. Shampoo bottle is one of plastic waste with high density polyethylene type (HDPE). One of the innovation to recycling shampoo bottles waste into the new products whichbeneficially and aestheticallyform by engineered the buns accesories. Accessories are one of the tools used by most women, in the form of trinkets or ornaments which ajusted to the trend to beautify the look. Accessories from shampoo bottle waste can be obtained from household waste, beauty salon and the beauty program study by inculcating human beings' behavior by transforming waste into blessing while also increasing family income. Technique of making its by compiling through improvement of panelist team. The goal of this research is to engineering theaccessories based on shampoo bottle waste as home economics. The method are using experiment, observation and documentation, analysis using descriptive. The results obtained from the overall sensory test averaged at 93%, while the favored test averaged at 85.5%. The product can be ordered according to the desired design, but it takes a long time. Therefore accessories engineering from shampoo bottles waste-based can be used as home economics. The production of shampoo bottles waste-based accessories should improved its quality and quantity, to be marketed through the community, by the cooperation with accessories and bun craftsmen.

  17. Computational Methods to Assess the Production Potential of Bio-Based Chemicals.

    Science.gov (United States)

    Campodonico, Miguel A; Sukumara, Sumesh; Feist, Adam M; Herrgård, Markus J

    2018-01-01

    Elevated costs and long implementation times of bio-based processes for producing chemicals represent a bottleneck for moving to a bio-based economy. A prospective analysis able to elucidate economically and technically feasible product targets at early research phases is mandatory. Computational tools can be implemented to explore the biological and technical spectrum of feasibility, while constraining the operational space for desired chemicals. In this chapter, two different computational tools for assessing potential for bio-based production of chemicals from different perspectives are described in detail. The first tool is GEM-Path: an algorithm to compute all structurally possible pathways from one target molecule to the host metabolome. The second tool is a framework for Modeling Sustainable Industrial Chemicals production (MuSIC), which integrates modeling approaches for cellular metabolism, bioreactor design, upstream/downstream processes, and economic impact assessment. Integrating GEM-Path and MuSIC will play a vital role in supporting early phases of research efforts and guide the policy makers with decisions, as we progress toward planning a sustainable chemical industry.

  18. Chemically-bonded brick production based on burned clay by means of semidry pressing

    Energy Technology Data Exchange (ETDEWEB)

    Voroshilov, Ivan, E-mail: Nixon.06@mail.ru; Endzhievskaya, Irina, E-mail: icaend@mail.ru; Vasilovskaya, Nina, E-mail: icaend@mail.ru [FSAEI HVE Siberian Federal University, 82 Svobodny Prospekt, Krasnoyarsk, 660130 (Russian Federation)

    2016-01-15

    We presented a study on the possibility of using the burnt rocks of the Krasnoyarsk Territory for production of chemically-bonded materials in the form of bricks which are so widely used in multistory housing and private house construction. The radiographic analysis of the composition of burnt rock was conducted and a modifier to adjust the composition uniformity was identified. The mixing moisture content was identified and optimal amount at 13-15% was determined. The method of semidry pressing has been chosen. The process of obtaining moldings has been theoretically proved; the advantages of chemically-bonded wall materials compared to ceramic brick were shown. The production of efficient artificial stone based on material burnt rocks, which is comparable with conventionally effective ceramic materials or effective with cell tile was proved, the density of the burned clay-based cell tile makes up to 1630-1785 kg \\ m{sup 3}, with compressive strength of 13.6-20.0 MPa depending on the compression ratio and cement consumption, frost resistance index is F50, and the thermal conductivity in the masonry is λ = 0,459-0,546 W \\ m {sup *} °C. The clear geometric dimensions of pressed products allow the use of the chemically-bonded brick based on burnt clay as a facing brick.

  19. Critical assessment of the deposition based dosimetric technique for radon/thoron decay products

    International Nuclear Information System (INIS)

    Mayya, Y.S.

    2010-01-01

    Inhalation doses due to radon ( 222 Rn) and thoron ( 220 Rn) are predominantly contributed by their decay products and not due to the gases themselves. Decay product measurements are being carried out essentially by either short-term active measurement like by air-sampling on a substrate followed by alpha or beta counting or by continuous active monitoring techniques based on silicon barrier detector. However, due to non-availability of satisfactory passive measurement techniques for the progeny species, it has been a usual practice to estimate the long time averaged progeny concentration from measured gas concentration using an assumed equilibrium factor. To be accurate, one is required to measure the equilibrium factor in situ along with the gas concentration. This being not practical, the assigned equilibrium factor (0.4 for indoor and 0.8 for outdoor for 222 Rn) approach has been an inevitable, though uncertain, part of the dosimetric strategies in both occupational and public domains. Further, in the case of thoron decay products however, equilibrium factor is of far more questionable validity. Thus, there is a need to shift from gas based dosimetric paradigm to that based on direct detection of progeny species

  20. Performance-based regulation: enterprise responsibility for reducing death, injury, and disease caused by consumer products.

    Science.gov (United States)

    Sugarman, Stephen D

    2009-12-01

    This article offers a bold new idea for confronting the staggering level of death, injury, and disease caused by five consumer products: cigarettes, alcohol, guns, junk food, and motor vehicles. Business leaders try to frame these negative outcomes as "collateral damage" that is someone else's problem. That framing not only is morally objectionable but also overlooks the possibility that, with proper prodding, industry could substantially lessen these public health disasters. I seek to reframe the public perception of who is responsible and propose to deploy a promising approach called "performance-based regulation" to combat the problem. Performance-based regulation would impose on manufacturers a legal obligation to reduce the negative social costs of their products. Rather than involving them in litigation or forcing them to operate differently (as "command-and-control" regimes do), performance-based regulation allows the firms to determine how best to decrease bad public health consequences. Like other public health strategies, performance-based regulation focuses on those who are far more likely than individual consumers to achieve real gains. Analogous to a tax on causing harm that exceeds a threshold level, performance-based regulation seeks to harness private initiative in pursuit of the public good.