JET joint undertaking. Annual report 1978

International Nuclear Information System (INIS)

1979-02-01

This document is intended for information only and should not be used as a technical reference. After an introductive part on the controlled nuclear fusion research and an historical survey of the JET project, are presented: the JET joint undertaking (members of council and committee...) with its administration (finance, personnel, external relations), and the scientific and technical department with its divisions for systems (experimental, magnet, plasma, assembly, power supplies, control and data acquisition, and site and building). In appendix is described the Euratom fusion research programme

The exclusion of 'public undertakings' from the re-use of public sector information regime

NARCIS (Netherlands)

Ricolfi, M.; Drexl, J.; van Eechoud, M.; Salmeron, M.; Sappa, C.; Tziavos, P.; Valero, J.; Pavoni, F.; Patrito, P.

2011-01-01

Should public undertakings be covered by the PSI Directive? The definitions of public sector bodies and bodies governed by public law, to which the PSI Directive applies, are currently taken from the public procurement Directives and public undertakings are not covered by these definitions. Should

[Environmental licensing of major undertakings: possible connection between health and environment].

Science.gov (United States)

Silveira, Missifany; Araújo Neto, Mário Diniz de

2014-09-01

The prospect of multidisciplinary assessment that considers the environmental impacts on the health of the population during the implementation of potentially polluting projects is incipient in Brazil. Considering the scenario of major undertakings in the country, broadening the outlook on the health and environment relationship based on social and economic development processes striving for environmentally sustainable projects is a key strategy. This article examines the debate on the relationship between the current development model, the risks, the environment and health and discusses the importance of the participation of the health sector in the environmental licensing procedures, which is the instrument of the Environmental Impact Assessment (EIA). Seeking to create more environmentally and socially sustainable territories, the health sector has been looking for opportunities to participate in the licensing processes of major undertakings from the EIA standpoint. Results of research conducted by the Ministry of Health have demonstrated the form of participation in these processes, highlighting the strengths and weaknesses that favor or hinder the increase of preventive actions in public health in the implementation of major undertakings in Brazil.

Measurement of global and local resonance terms

CERN Document Server

Tomás, R; Calaga, R; Fischer, W; Franchi, A; Rumolo, Giovanni

2005-01-01

Recently, resonance driving terms were successfully measured in the CERN SPS and the BNL RHIC from the Fourier spectrum of beam position monitor (BPM) data. Based on these measurements a new analysis has been derived to extract truly local observables from BPM data. These local observables are called local resonance terms since they share some similarities with the global resonance terms. In this paper we derive these local terms analytically and present experimental measurements of sextupolar global and local resonance terms in RHIC. Nondestructive measurements of these terms using ac dipoles are also presented.

Representative of local committee

International Nuclear Information System (INIS)

Barcelo, C.

2007-01-01

Carlos Barcelo, spoke about the involvement of local companies in the dismantling project. Local companies realised that they could not undertake the whole project, and informed ENRESA of the tasks in which they would be able to co-operate. On the whole, during the course of the 5-year project the local and regional firms were given more work than they had originally expected. Mr. Barcelo praised the good partnership that evolved between the local firms and the implementer. (author)

CONSIDERATIONS ON THE RULES ON COMPETITION GOVERNING UNDERTAKINGS IN THE EUROPEAN UNION

Directory of Open Access Journals (Sweden)

Vlad – Teodor Florea

2014-11-01

Full Text Available This study concerns the general rules on competition between undertakings in the EU. The author paid attention primarly to matters on the prohibition of agreements that aim to distort or impair competition on the internal market. Moreover, he examined in detail the matter concerning the regulation and interdiction of the abuse of a dominant position. The work also reviews doctrinal opinions, as well as the jurisprudential solutions in the area. The author’s concern to summarize and develop the conditions for the implementation of each of the two legal mechanisms is worth noting: the prohibition of agreements between undertakings and the abuse of a dominant position. The essential considerations taken into account by the Court of Justice of the European Union in settling a case whose subject consisted of assessing the manner in which an undertaking reflected on competition on the internal market were selected at the end of the work.

Local measurements in turbulent bubbly flows

International Nuclear Information System (INIS)

Suzanne, C.; Ellingsen, K.; Risso, F.; Roig, V.

1998-01-01

Local measurements methods in bubbly flows are discussed. Concerning liquid velocity measurement, problems linked to HFA and LDA are first analysed. Then simultaneously recorded velocity signals obtained by both anemometers are compared. New signal processing are developed for the two techniques. Bubble sizes and velocities measurements methods using intrusive double optical sensor probe are presented. Plane bubbly mixing layer has been investigated. Local measurements using the described methods are presented as examples. (author)

Dual entanglement measures based on no local cloning and no local deleting

International Nuclear Information System (INIS)

Horodecki, Michal; Sen, Aditi; Sen, Ujjwal

2004-01-01

The impossibility of cloning and deleting of unknown states constitute important restrictions on processing of information in the quantum world. On the other hand, a known quantum state can always be cloned or deleted. However, if we restrict the class of allowed operations, there will arise restrictions on the ability of cloning and deleting machines. We have shown that cloning and deleting of known states is in general not possible by local operations. This impossibility hints at quantum correlation in the state. We propose dual measures of quantum correlation based on the dual restrictions of no local cloning and no local deleting. The measures are relative entropy distances of the desired states in a (generally impossible) perfect local cloning or local deleting process from the best approximate state that is actually obtained by imperfect local cloning or deleting machines. Just like the dual measures of entanglement cost and distillable entanglement, the proposed measures are based on important processes in quantum information. We discuss their properties. For the case of pure states, estimations of these two measures are also provided. Interestingly, the entanglement of cloning for a maximally entangled state of two two-level systems is not unity

Problems of Revenue Generation in Local Government ...

African Journals Online (AJOL)

Every local jurisdiction has its unique economic, social and physical characteristics and its historical tradition which are better understood by its people. Thus, the Local Government Areas are created to provide the services which the Federal and State Governments cannot easily undertake due to their remoteness from the ...

Financial instability from local market measures

International Nuclear Information System (INIS)

Bardoscia, Marco; Livan, Giacomo; Marsili, Matteo

2012-01-01

We study the emergence of instabilities in a stylized model of a financial market, when different market actors calculate prices according to different (local) market measures. We derive typical properties for ensembles of large random markets using techniques borrowed from statistical mechanics of disordered systems. We show that, depending on the number of financial instruments available and on the heterogeneity of local measures, the market moves from an arbitrage-free phase to an unstable one, where the complexity of the market—as measured by the diversity of financial instruments—increases, and arbitrage opportunities arise. A sharp transition separates the two phases. Focusing on two different classes of local measures inspired by real market strategies, we are able to analytically compute the critical lines, corroborating our findings with numerical simulations. (paper)

Local high precision 3D measurement based on line laser measuring instrument

Science.gov (United States)

Zhang, Renwei; Liu, Wei; Lu, Yongkang; Zhang, Yang; Ma, Jianwei; Jia, Zhenyuan

2018-03-01

In order to realize the precision machining and assembly of the parts, the geometrical dimensions of the surface of the local assembly surfaces need to be strictly guaranteed. In this paper, a local high-precision three-dimensional measurement method based on line laser measuring instrument is proposed to achieve a high degree of accuracy of the three-dimensional reconstruction of the surface. Aiming at the problem of two-dimensional line laser measuring instrument which lacks one-dimensional high-precision information, a local three-dimensional profile measuring system based on an accurate single-axis controller is proposed. First of all, a three-dimensional data compensation method based on spatial multi-angle line laser measuring instrument is proposed to achieve the high-precision measurement of the default axis. Through the pretreatment of the 3D point cloud information, the measurement points can be restored accurately. Finally, the target spherical surface is needed to make local three-dimensional scanning measurements for accuracy verification. The experimental results show that this scheme can get the local three-dimensional information of the target quickly and accurately, and achieves the purpose of gaining the information and compensating the error for laser scanner information, and improves the local measurement accuracy.

The importance of local measurements for cosmology

CERN Document Server

Verde, Licia; Jimenez, Raul

2013-01-01

We explore how local, cosmology-independent measurements of the Hubble constant and the age of the Universe help to provide a powerful consistency check of the currently favored cosmological model (flat LambdaCDM) and model-independent constraints on cosmology. We use cosmic microwave background (CMB) data to define the model-dependent cosmological parameters, and add local measurements to assess consistency and determine whether extensions to the model are justified. At current precision, there is no significant tension between the locally measured Hubble constant and age of the Universe (with errors of 3% and 5% respectively) and the corresponding parameters derived from the CMB. However, if errors on the local measurements could be decreased by a factor of two, one could decisively conclude if there is tension or not. We also compare the local and CMB data assuming simple extensions of the flat, $\\Lambda$CDM model (including curvature, dark energy with a constant equation of state parameter not equal to -1...

Using an undertaker's data to assess changing patterns of mortality ...

African Journals Online (AJOL)

Key informant interviews were done to support the undertaker's data and determine how families bear the burden of burying deceased relatives. Despite a disproportionate increase in deaths in certain age categories and evidence of worsening poverty, funerals remain large and elaborate affairs. Keywords: AIDS, burial ...

Detection of entanglement with few local measurements

International Nuclear Information System (INIS)

Guehne, O.; Hyllus, P.; Bruss, D.; Lewenstein, M.; Sanpera, A.; Ekert, A.; Macchiavello, C.

2002-01-01

We introduce a general method for the experimental detection of entanglement by performing only few local measurements, assuming some prior knowledge of the density matrix. The idea is based on the minimal decomposition of witness operators into a pseudomixture of local operators. We discuss an experimentally relevant case of two qubits, and show an example how bound entanglement can be detected with few local measurements

Detection of entanglement with few local measurements

OpenAIRE

Guehne, O.; Hyllus, P.; Bruss, D.; Ekert, A.; Lewenstein, M.; Macchiavello, C.; Sanpera, A.

2002-01-01

We introduce a general method for the experimental detection of entanglement by performing only few local measurements, assuming some prior knowledge of the density matrix. The idea is based on the minimal decomposition of witness operators into a pseudo-mixture of local operators. We discuss an experimentally relevant case of two qubits, and show an example how bound entanglement can be detected with few local measurements.

Detection of entanglement with few local measurements

Science.gov (United States)

Gühne, O.; Hyllus, P.; Bruß, D.; Ekert, A.; Lewenstein, M.; Macchiavello, C.; Sanpera, A.

2002-12-01

We introduce a general method for the experimental detection of entanglement by performing only few local measurements, assuming some prior knowledge of the density matrix. The idea is based on the minimal decomposition of witness operators into a pseudomixture of local operators. We discuss an experimentally relevant case of two qubits, and show an example how bound entanglement can be detected with few local measurements.

LOCAL PUBLIC 0 EXPENDITURE AUTONOMY – MEASURING APPROACH

Directory of Open Access Journals (Sweden)

Irina BILAN

2013-06-01

Full Text Available The decentralization process was continuous in Romania starting with 1990, generating the implication of local authorities in local public finance, as a result of exclusives, shared and delegate competences and, so, the necessity of ensuring a good management of resources and expenditures. Therefore, the decentralization of competences / responsibilities from State to local governments was a major Romanian political theme and a first rank component of management of local public finance, as main driving instrument for local development. Specific legal framework of local responsibilities is established both to European and national level. Researchers based on regulation and practice have tried to quantify the responsibilities developing different models to measure local revenue and expenditures autonomy. The paper aims is to identify some models for measuring local expenditure autonomy and to apply for Romania. The study is oriented to measure local expenditure autonomy in Romania using Bell, Ebel, Kaiser and Rojchaichainthorn's model.

Measuring probe for measurement of local velocities

International Nuclear Information System (INIS)

Casal, V.; Arnold, G.; Kirchner, R.; Kussmaul, H.; Miller, H.

1988-03-01

The report describes a method for measurement of local velocities. It bases on the detection of the propagation of a temperature pulse induced into the fluid. The method can also be applied in flowing liquid metals with superimposed magnetic field; in this case common measuring principles fail application. The measuring system discussed consists of, a measuring head, a heating system, amplifiers and a PC. The latter performs process operation, data sampling, and evaluation of velocity. The measuring head itself includes a miniaturized heater (as a pulse marker) heated by the heating system in a short pulse, and a number of thermocouples (sensors) for detection of signals. The design, construction, and examination of a developed measuring device is described. (orig.) [de

Measuring local autonomy: A decision-making approach

NARCIS (Netherlands)

Fleurke, F.; Willemse, R.

2006-01-01

In studies on central-local relations it is common to assess local autonomy in a deductive way. The extent of local autonomy is determined by measuring the central legal and financial competence, after which the remaining room for local decision-making is determined. The outcome of this indirect

Community Participation and Local Government Planning in Lesotho

African Journals Online (AJOL)

and planning, and promulgated it in 2001. This paper provides a critical appraisal of efforts to put local government planning into practice in Lesotho through the use of the 'Quick and SMART' local government planning model. This article uses the SWOT analysis technique to undertake a critical appraisal of this planning ...

An investigation of nurse educator's perceptions and experiences of undertaking clinical practice.

Science.gov (United States)

Williams, Angela; Taylor, Cathy

2008-11-01

Educational policy (DOH, 1999. Making a difference: strengthening the nursing, midwifery and health visiting contribution to health and healthcare. Department of Health, London; UKCC, 1999. Fitness for Practice. United Kingdom Central Council for Nursing, Midwifery and Health Visiting, London; Nursing and Midwifery Council, 2006. Standards to support learning and assessment in practice. Nursing and Midwifery Council, London) and current nursing literature (Griscti, O., Jacono, B., Jacono, J., 2005. The nurse educator's clinical role. Journal of Advanced Nursing 50 (1), 84-92; Owen, S., Ferguson, K., Baguley, I., 2005. The clinical activity of mental health nurse lecturers. Journal of Psychiatric and Mental Health Nursing 12, 310-316), place increasing emphasis on nurse educators undertaking clinical practice to facilitate their clinical confidence and competence. This study investigated nurse educators' perceptions and experiences of undertaking clinical practice. A qualitative design and descriptive, exploratory approach were used. A purposive sample of 11 nurse educators in one nursing department, took part in two focus group interviews, one with 5 and the other with 6 respondents, to identify and discuss their perceptions and experiences of undertaking clinical practice. A process of thematic content analysis revealed three broad themes relating to the meaning and importance of clinical practice, perceived benefits and barriers which are examined and discussed. The paper concludes that despite policy recommendations, barriers highlighted in this study such as insufficient time, heavy workload and a lack of valuing of the clinical role have been raised over the past few decades. The effect of undertaking clinical practice, particularly on the quality of teaching is argued to be valuable armoury in the battle to secure sufficient resources to support engagement in clinical practice. Financial and organisational commitment; valuing of clinical practice and research

The qualitative interview and challenges for clinicians undertaking research: a personal reflection.

Science.gov (United States)

Fisher, Karin

2011-01-01

Drawing on my doctoral experience the aim of this article is to present my transition from practitioner to novice researcher and the challenges I encountered when undertaking qualitative in-depth interviews. The contents of my research diary were coded for words, sentences and paragraphs and were then grouped into themes and subsequently organised into concepts and categories. The analysis identified one core category: 'changing states: learning to become a researcher'. The related categories included 'guessing responses', 'confusing boundaries' and 'revealing hidden concepts'. These concepts provide a description of how I learnt to become a researcher and became a changed state. The paper provides practitioners with practical examples of my transition from practitioner to novice researcher. I offer some tips for practitioners who wish to undertake research in their clinical role.

Alternative confidence measure for local matching stereo algorithms

CSIR Research Space (South Africa)

Ndhlovu, T

2009-11-01

Full Text Available The authors present a confidence measure applied to individual disparity estimates in local matching stereo correspondence algorithms. It aims at identifying textureless areas, where most local matching algorithms fail. The confidence measure works...

Local and global measures of shape dynamics

International Nuclear Information System (INIS)

Driscoll, Meghan K; Losert, Wolfgang; Fourkas, John T

2011-01-01

The shape and motion of cells can yield significant insights into the internal operation of a cell. We present a simple, yet versatile, framework that provides multiple metrics of cell shape and cell shape dynamics. Analysis of migrating Dictyostelium discoideum cells shows that global and local metrics highlight distinct cellular processes. For example, a global measure of shape shows rhythmic oscillations suggestive of contractions, whereas a local measure of shape shows wave-like dynamics indicative of protrusions. From a local measure of dynamic shape, or boundary motion, we extract the times and locations of protrusions and retractions. We find that protrusions zigzag, while retractions remain roughly stationary along the boundary. We do not observe any temporal relationship between protrusions and retractions. Our analysis framework also provides metrics of the boundary as whole. For example, as the cell speed increases, we find that the cell shape becomes more elongated. We also observe that while extensions and retractions have similar areas, their shapes differ

Challenges of local water governance

DEFF Research Database (Denmark)

Munk Ravnborg, Helle; Bustamante, Rocio; Cissé, Abdoulaye

2012-01-01

This article presents the results of comprehensive inventories made of water-related conflict and cooperation occurring in five districts in Africa, Asia and Latin America between 1997 and 2007. Following a description of the conceptual and methodological framework developed for undertaking...... these inventories, the article documents the extent, nature and intensity of water-related conflict and cooperation in the five districts. The article concludes by identifying three challenges relating to the magnitude, complexity and invisibility of local-level conflict and cooperation about water, which efforts...... to improve local water governance would have to address....

20 CFR 703.205 - Filing of Agreement and Undertaking; deposit of security.

Science.gov (United States)

2010-04-01

...— (1) Deposit with the Branch indemnity bonds or letters of credit in the amount fixed by the Office... and payable from the proceeds of the deposited security; (b) Give security in the amount fixed in the... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Filing of Agreement and Undertaking; deposit...

Measures with locally finite support and spectrum.

Science.gov (United States)

Meyer, Yves F

2016-03-22

The goal of this paper is the construction of measures μ on R(n)enjoying three conflicting but fortunately compatible properties: (i) μ is a sum of weighted Dirac masses on a locally finite set, (ii) the Fourier transform μ f μ is also a sum of weighted Dirac masses on a locally finite set, and (iii) μ is not a generalized Dirac comb. We give surprisingly simple examples of such measures. These unexpected patterns strongly differ from quasicrystals, they provide us with unusual Poisson's formulas, and they might give us an unconventional insight into aperiodic order.

Peer Evaluation Can Reliably Measure Local Knowledge

Science.gov (United States)

Reyes-García, Victoria; Díaz-Reviriego, Isabel; Duda, Romain; Fernández-Llamazares, Álvaro; Gallois, Sandrine; Guèze, Maximilien; Napitupulu, Lucentezza; Pyhälä, Aili

2016-01-01

We assess the consistency of measures of individual local ecological knowledge obtained through peer evaluation against three standard measures: identification tasks, structured questionnaires, and self-reported skills questionnaires. We collected ethnographic information among the Baka (Congo), the Punan (Borneo), and the Tsimane' (Amazon) to…

Local eddy current measurements in pulsed fields

Energy Technology Data Exchange (ETDEWEB)

Espina-Hernandez, J.H. [SEPI-Electronica, ESIME-IPN, UPALM Edif. ' Z' . Zacatenco, Mexico DF 07738 (Mexico)], E-mail: jhespina@gmail.com; Groessinger, R. [Institute of Solid State Physics, Vienna University of Technology, Wiedner Hauptstrasse 8-10, A-1040 Vienna (Austria); Hallen, J.M. [Departamento de Ingenieria Metalurgica, IPN-ESIQIE, UPALM Edif. 7, Zacatenco, Mexico DF 07738 (Mexico)

2008-07-15

This work presents new eddy current measurements in pulsed fields. A commercial point pick-up coil is used to detect the induction signal along the radius of Cu and Al samples with cylindrical shape and diameters between 5 and 35 mm. Local eddy current measurements were performed on the surface of conducting materials due to the small dimensions of the coil. A simple electrical circuit, used as a model, is proposed to describe the local eddy current effect in pulsed fields. The proposed model allows to calculate the phase shift angle between the signal proportional to eddy currents and the applied external field in a pulsed field magnetometer.

Changes in the functions of undertakings in electricity supply

International Nuclear Information System (INIS)

Oberlack, H.W.

1976-01-01

For the electricity supply industry also it is necessary, by means of more intensive publicity work, to achieve the general realisation that neither new laws nor intervention of the state are required for dealing in the interests of the consumer with the problems arising, from great changes in all fields of business enterprise. It is more important for the electricity supply undertakings (EVU), by means of executive power and the administration of justice, to be put a position to carry out in the most efficient manner the functions entrusted to them by the Federal Government under the Power Supply Law and the energy programme. (orig.) [de

Construction of extremal local positive-operator-valued measures under symmetry

International Nuclear Information System (INIS)

Virmani, S.; Plenio, M.B.

2003-01-01

We study the local implementation of positive-operator-valued measures (POVMs) when we require only the faithful reproduction of the statistics of the measurement outcomes for all initial states. We first demonstrate that any POVM with separable elements can be implemented by a separable superoperator, and develop techniques for calculating the extreme points of POVMs under a certain class of constraint that includes separability and positive partial transposition. As examples we consider measurements that are invariant under various symmetry groups (Werner, isotropic, Bell diagonal, local orthogonal), and demonstrate that in these cases separability of the POVM elements is equivalent to implementability via local operations and classical communication (LOCC). We also calculate the extrema of these classes of measurement under the groups that we consider, and give explicit LOCC protocols for attaining them. These protocols are hence optimal methods for locally discriminating between states of these symmetries. One of many interesting consequences is that the best way to locally discriminate Bell-diagonal mixed states is to perform a two-outcome POVM using local von Neumann projections. This is true regardless of the cost function, the number of states being discriminated, or the prior probabilities. Our results give the first cases of local mixed-state discrimination that can be analyzed quantitatively in full, and may have application to other problems such as demonstrations of nonlocality, experimental entanglement witnesses, and perhaps even entanglement distillation

Co-founding ant queens prevent disease by performing prophylactic undertaking behaviour.

Science.gov (United States)

Pull, Christopher D; Cremer, Sylvia

2017-10-13

Social insects form densely crowded societies in environments with high pathogen loads, but have evolved collective defences that mitigate the impact of disease. However, colony-founding queens lack this protection and suffer high rates of mortality. The impact of pathogens may be exacerbated in species where queens found colonies together, as healthy individuals may contract pathogens from infectious co-founders. Therefore, we tested whether ant queens avoid founding colonies with pathogen-exposed conspecifics and how they might limit disease transmission from infectious individuals. Using Lasius niger queens and a naturally infecting fungal pathogen Metarhizium brunneum, we observed that queens were equally likely to found colonies with another pathogen-exposed or sham-treated queen. However, when one queen died, the surviving individual performed biting, burial and removal of the corpse. These undertaking behaviours were performed prophylactically, i.e. targeted equally towards non-infected and infected corpses, as well as carried out before infected corpses became infectious. Biting and burial reduced the risk of the queens contracting and dying from disease from an infectious corpse of a dead co-foundress. We show that co-founding ant queens express undertaking behaviours that, in mature colonies, are performed exclusively by workers. Such infection avoidance behaviours act before the queens can contract the disease and will therefore improve the overall chance of colony founding success in ant queens.

Joint measurements of spin, operational locality and uncertainty

International Nuclear Information System (INIS)

Andersson, E.; Barnett, S.M.; Aspect, A.

2005-01-01

Full text: Joint measurements of non-commuting observables are possible within quantum mechanics, if one accepts an increase in the variances of the jointly measured observables. In this contribution, we discuss joint measurements of spin 1/2 along any two directions. Starting from an operational locality principle, we show how to obtain the known bound on how sharp the joint measurement can be. Operational locality here means, that no operation performed at a quantum system at one location can instantaneously affect a system at another location. The measurement bound is general and is here obtained without reference to any quantum measurement formalism. We find that the bound is formally identical to a Bell inequality of the CHSH type, and we also give a direct interpretation of the measurement bound in terms of an uncertainty relation. A simple way to realise the joint measurement for the case of photon polarization is presented. Further to their fundamental interest, quantum joint measurements of non-commuting observables can be related to state estimation. They are also of interest in quantum information, e.g. as strategies for eavesdropping in quantum cryptography. (author)

Impedance Localization Measurements using AC Dipoles in the LHC

CERN Document Server

Biancacci, Nicolo; Papotti, Giulia; Persson, Tobias; Salvant, Benoit; Tomás, Rogelio

2016-01-01

The knowledge of the LHC impedance is of primary importance to predict the machine performance and allow for the HL-LHC upgrade. The developed impedance model can be benchmarked with beam measurements in order to assess its validity and limit. This is routinely done, for example, moving the LHC collimator jaws and measuring the induced tune shift. In order to localize possible unknown impedance sources, the variation of phase advance with intensity between beam position monitors can be measured. In this work we will present the impedance localization measurements performed at injection in the LHC using AC dipoles as exciter as well as the underlying theory.

Inspection of freeform surfaces considering uncertainties in measurement, localization and surface reconstruction

International Nuclear Information System (INIS)

Mehrad, Vahid; Xue, Deyi; Gu, Peihua

2013-01-01

Inspection of a manufactured freeform surface can be conducted by building its surface model and comparing this manufactured surface model with the ideal design surface model and its tolerance requirement. The manufactured freeform surface model is usually achieved by obtaining measurement points on the manufactured surface, transforming these measurement points from the measurement coordinate system to the design coordinate system through localization, and reconstructing the surface model using the localized measurement points. In this research, a method was developed to estimate the locations and their variances of any selected points on the reconstructed freeform surface considering different sources of uncertainties in measurement, localization and surface reconstruction processes. In this method, first locations and variances of the localized measurement points are calculated considering uncertainties of the measurement points and uncertainties introduced in the localization processes. Then locations and variances of points on the reconstructed freeform surface are obtained considering uncertainties of the localized measurement points and uncertainties introduced in the freeform surface reconstruction process. Two case studies were developed to demonstrate how these three different uncertainty sources influence the quality of the reconstructed freeform curve and freeform surface in inspection. (paper)

Measurements of local two-phase flow parameters in a boiling flow channel

International Nuclear Information System (INIS)

Yun, Byong Jo; Park, Goon-CherI; Chung, Moon Ki; Song, Chul Hwa

1998-01-01

Local two-phase flow parameters were measured lo investigate the internal flow structures of steam-water boiling flow in an annulus channel. Two kinds of measuring methods for local two-phase flow parameters were investigated. These are a two-conductivity probe for local vapor parameters and a Pitot cube for local liquid parameters. Using these probes, the local distribution of phasic velocities, interfacial area concentration (IAC) and void fraction is measured. In this study, the maximum local void fraction in subcooled boiling condition is observed around the heating rod and the local void fraction is smoothly decreased from the surface of a heating rod to the channel center without any wall void peaking, which was observed in air-water experiments. The distributions of local IAC and bubble frequency coincide with those of local void fraction for a given area-averaged void fraction. (author)

An Observability Metric for Underwater Vehicle Localization Using Range Measurements

Directory of Open Access Journals (Sweden)

Filippo Arrichiello

2013-11-01

Full Text Available The paper addresses observability issues related to the general problem of single and multiple Autonomous Underwater Vehicle (AUV localization using only range measurements. While an AUV is submerged, localization devices, such as Global Navigation Satellite Systems, are ineffective, due to the attenuation of electromagnetic waves. AUV localization based on dead reckoning techniques and the use of affordable motion sensor units is also not practical, due to divergence caused by sensor bias and drift. For these reasons, localization systems often build on trilateration algorithms that rely on the measurements of the ranges between an AUV and a set of fixed transponders using acoustic devices. Still, such solutions are often expensive, require cumbersome calibration procedures and only allow for AUV localization in an area that is defined by the geometrical arrangement of the transponders. A viable alternative for AUV localization that has recently come to the fore exploits the use of complementary information on the distance from the AUV to a single transponder, together with information provided by on-board resident motion sensors, such as, for example, depth, velocity and acceleration measurements. This concept can be extended to address the problem of relative localization between two AUVs equipped with acoustic sensors for inter-vehicle range measurements. Motivated by these developments, in this paper, we show that both the problems of absolute localization of a single vehicle and the relative localization of multiple vehicles can be treated using the same mathematical framework, and tailoring concepts of observability derived for nonlinear systems, we analyze how the performance in localization depends on the types of motion imparted to the AUVs. For this effect, we propose a well-defined observability metric and validate its usefulness, both in simulation and by carrying out experimental tests with a real marine vehicle during which the

The Measurement Process in Local Quantum Physics and the EPR Paradox

Science.gov (United States)

Doplicher, Sergio

2018-01-01

We describe in a qualitative way a possible picture of the Measurement Process in Quantum Mechanics, which takes into account the finite and non zero time duration T of the interaction between the observed system and the microscopic part of the measurement apparatus; the finite space size R of that apparatus; and the fact that the macroscopic part of the measurement apparatus, having the role of amplifying the effect of that interaction to a macroscopic scale, is composed by a very large but finite number N of particles. The Schrödinger evolution of the composed system can be expected to deform into the conventional picture of the measurement, as an instantaneous action turning a pure state into a mixture, only in the limit {N → ∞, T → 0, R → ∞}. Our main point is to discuss this picture for the measurement of local observables in Quantum Field Theory, where the dynamics of the theory and the measurement itself are described by the same time evolution complying with the Principle of Locality. We comment on the Einstein Podolski Rosen thought experiment, reformulated here only in terms of local observables (rather than global ones, as one particle or polarization observables).The local picture of the measurement process helps to make it clear that there is no conflict with the Principle of Locality.

Local charge measurement using off-axis electron holography

DEFF Research Database (Denmark)

Beleggia, Marco; Gontard, L.C.; Dunin-Borkowski, R.0E.

2016-01-01

A model-independent approach based on Gauss’ theorem for measuring the local charge in a specimen from an electron-optical phase image recorded using off-axis electron holography was recently proposed. Here, we show that such a charge measurement is reliable when it is applied to determine the to...

An undertaking planning game for the electricity supply industry

International Nuclear Information System (INIS)

Troescher, H.

1977-01-01

Planning games have been found satisfactory in many field in political and economic life. In particular the more convenient access to electronic calculators has made a contrinution to their wider use. It is therefore surprising that the first planning game which has become known for the electricity supply industry was first published in the year 1975. This is the planning game for the Bernischen Kraftwerke AG, which is based on a simplified model of a small electricity supply undertaking (EVU). This planning game was adapted in the RWE to the conditions in larger EVU and a few additional model components were added. Besides the general points of view on planning games for EVU the author deals with the extended planning game which is termed in the article PEW. (orig.) [de

Measurement of biofilm growth and local hydrodynamics using optical coherence tomography

NARCIS (Netherlands)

Weiss, Nicolas; El Tayeb El Obied, Khalid; Kalkman, Jeroen; Lammertink, Rob G.H.; van Leeuwen, Ton G.

2016-01-01

We report on localized and simultaneous measurement of biofilm growth and local hydrodynamics in a microfluidic channel using optical coherence tomography. We measure independently with high spatio-temporal resolution the longitudinal flow velocity component parallel to the imaging beam and the

Social and environmental assessment: a preliminary data base on population and territory in the undertakings pipelines: a natural gas pipeline GASBEL II; Avaliacao socioambiental - base de dados preliminar sobre populacao e territorio em empreendimentos de dutos - estudo de caso: avaliacao socioambiental GASBEL II

Energy Technology Data Exchange (ETDEWEB)

Bartolini, Marcia; Bach, Vanessa [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Ismerio, Marcia [Pallos Consultorias, Rio de Janeiro, RJ (Brazil); Leal, Edna Mara [Camargo Correa Engenharia (Brazil)

2008-07-01

The social environmental assessment consists in an instrument of planning which principal objective is to know the social ambient that will be changed by the PETROBRAS' pipe undertakings, that are planning to be implemented and will be analyzed by the licensers environmental organs. When pipeline projects are planned, their route cross some regions and ecological sensitive areas, therefore, the attitude of consider the social environmental aspects at the planning stage through the use of valuation instruments, anticipating, the potential social and environmental impacts, assumes more importance in integrating management of these undertakings. This presentation has the main objective to stand out the relevance of the social environmental assessment realization as preliminary knowledge base to the undertakings, since the research results developed represents a support of information about the regions where the undertakings install themselves in distinct stages: environmental permits, assembly and construction and operating. The social environmental assessment of the project named GASBEL II is presented as a case study once it allow to observe a gas pipeline transport project to be implemented at different regions and areas. The Pipeline will cross two different federal states, where the local research boarded many communities with different ways and conditions of life, territory use, cultural expressions and other aspects. (author)

Graph-Based Cooperative Localization Using Symmetric Measurement Equations.

Science.gov (United States)

Gulati, Dhiraj; Zhang, Feihu; Clarke, Daniel; Knoll, Alois

2017-06-17

Precise localization is a key requirement for the success of highly assisted or autonomous vehicles. The diminishing cost of hardware has resulted in a proliferation of the number of sensors in the environment. Cooperative localization (CL) presents itself as a feasible and effective solution for localizing the ego-vehicle and its neighboring vehicles. However, one of the major challenges to fully realize the effective use of infrastructure sensors for jointly estimating the state of a vehicle in cooperative vehicle-infrastructure localization is an effective data association. In this paper, we propose a method which implements symmetric measurement equations within factor graphs in order to overcome the data association challenge with a reduced bandwidth overhead. Simulated results demonstrate the benefits of the proposed approach in comparison with our previously proposed approach of topology factors.

Measuring the local mobility of graphene on semiconductors

Science.gov (United States)

Zhong, Haijian; Liu, Zhenghui; Wang, Jianfeng; Pan, Anlian; Xu, Gengzhao; Xu, Ke

2018-04-01

Mobility is an important parameter to gauge the performance of graphene devices, which is usually measured by FET or Hall methods relying on the use of insulating substrates. However, these methods are not applicable for the case of graphene on semiconductors, because some current will inevitably cross their junctions and flow through the semiconductors except directly traversing the graphene surface. Here we demonstrate a method for measuring the local mobility of graphene on gallium nitrides combining Kelvin probe force microscopy (KPFM) and conductive atomic force microscopy (C-AFM). The carrier density related to Fermi level shifts in graphene can be acquired from KPFM. The local mobility of graphene is calculated from the carrier mean free path available from the effective contact area, which can be fitted from the local I-V curves in graphene/GaN junctions by C-AFM. Our method can be used to investigate an arbitrary region in graphene and also be applied to other semiconductor substrates and do not introduce damages. These results will benefit recent topical application researches for graphene integration in various semiconductor devices.

The capabilities and scope-of-practice requirements of advanced life support practitioners undertaking critical care transfers: A Delphi study

Directory of Open Access Journals (Sweden)

Monique Venter

2016-11-01

Full Text Available Background. Critical care transfers (CCT refer to the high level of care given during transport (via ambulance, helicopter or fixed-wing aircraft of patients who are of high acuity. In South Africa (SA, advanced life support (ALS paramedics undertake CCTs. The scope of ALS in SA has no extended protocol regarding procedures or medications in terms of dealing with these CCTs. Aim. The aim of this study was to obtain the opinions of several experts in fields pertaining to critical care and transport and to gain consensus on the skills and scope-of-practice requirements of paramedics undertaking CCTs in the SA setting. Methods. A modified Delphi study consisting of three rounds was undertaken using an online survey platform. A heterogeneous sample (n=7, consisting of specialists in the fields of anaesthesiology, emergency medicine, internal medicine, critical care, critical care transport and paediatrics, was asked to indicate whether, in their opinion, selected procedures and medications were needed within the scope of practice of paramedics undertaking CCTs. Results. After three rounds, consensus was obtained in 70% (57/81 of procedures and medications. Many of these items are not currently within the scope of paramedics’ training. The panel felt that paramedics undertaking these transfers should have additional postgraduate training that is specific to critical care. Conclusion. Major discrepancies exist between the current scope of paramedic practice and the suggested required scope of practice for CCTs. An extended scope of practice and additional training should be considered for these practitioners.

Local measurement of transport parameters for laser injected trace impurities

Energy Technology Data Exchange (ETDEWEB)

Giannella, R; Lauro-Taroni, L [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking

1994-07-01

A procedure has been developed that determines local measurements of transport parameters`s profiles for injected impurities. The measured profiles extend from the plasma centre up to a certain radial position (usually {rho} = 0.6-0.7). In the outer region of the plasma the procedure supplies ``most suitable extensions`` up to the plasma edge of the measured transport profiles. The procedure intrinsically assures consistency and excellent agreement between the simulated and experimental data of local broad band soft X-ray emissivity and intensities of individual emission lines from different ion states of the injected impurities. 4 refs., 3 figs.

Effect of the interface resistance in non-local Hanle measurements

International Nuclear Information System (INIS)

Villamor, Estitxu; Hueso, Luis E.; Casanova, Fèlix

2015-01-01

We use lateral spin valves with varying interface resistance to measure non-local Hanle effect in order to extract the spin-diffusion length of the non-magnetic channel. A general expression that describes spin injection and transport, taking into account the influence of the interface resistance, is used to fit our results. Whereas the fitted spin-diffusion length value is in agreement with the one obtained from standard non-local measurements in the case of a finite interface resistance, in the case of transparent contacts a clear disagreement is observed. The use of a corrected expression, recently proposed to account for the anisotropy of the spin absorption at the ferromagnetic electrodes, still yields a deviation of the fitted spin-diffusion length which increases for shorter channel distances. This deviation shows how sensitive the non-local Hanle fittings are, evidencing the complexity of obtaining spin transport information from such type of measurements

Quantum measurement information as a key to energy extraction from local vacuums

International Nuclear Information System (INIS)

Hotta, Masahiro

2008-01-01

In this paper, a protocol is proposed in which energy extraction from local vacuum states is possible by using quantum measurement information for the vacuum state of quantum fields. In the protocol, Alice, who stays at a spatial point, excites the ground state of the fields by a local measurement. Consequently, wave packets generated by Alice's measurement propagate the vacuum to spatial infinity. Let us assume that Bob stays away from Alice and fails to catch the excitation energy when the wave packets pass in front of him. Next Alice announces her local measurement result to Bob by classical communication. Bob performs a local unitary operation depending on the measurement result. In this process, positive energy is released from the fields to Bob's apparatus of the unitary operation. In the field systems, wave packets are generated with negative energy around Bob's location. Soon afterwards, the negative-energy wave packets begin to chase after the positive-energy wave packets generated by Alice and form loosely bound states.

Measurement of local void fraction in a ribbed annulus

International Nuclear Information System (INIS)

Steimke, J.L.

1992-01-01

The computer code FLOWTRAN-TF is used to analyze hypothetical hydraulic accidents for the nuclear reactor at the Savannah River Site. During a hypothetical Large Break Loss-of-Coolant Accident (LOCA), reactor assemblies would contain a two-phase mixture of air and water which flows downward. Reactor assemblies consist of nested, ribbed annuli. Longitudinal ribs divide each annulus into four subchannels. For accident conditions, air and water can flow past ribs from one subchannel to another. For FLOWTRAN-TF to compute the size of those flows, it is necessary to know the local void fraction in the region of the rib. Measurements have previously been made of length-average void fraction in a ribbed annulus. However, no direct measurements were available of local void fraction. Due to the lack of data, a test was designed to measure local void fraction at the rib. One question addressed by the test was whether void fraction at the rib is solely a function of azimuthal-average void fraction or a function of additional variables such as pressure boundary conditions. This report provides a discussion of this test

Reality, measurement and locality in Quantum Field Theory

International Nuclear Information System (INIS)

Tommasini, Daniele

2002-01-01

It is currently believed that the local causality of Quantum Field Theory (QFT) is destroyed by the measurement process. This belief is also based on the Einstein-Podolsky-Rosen (EPR) paradox and on the so-called Bell's theorem, that are thought to prove the existence of a mysterious, instantaneous action between distant measurements. However, I have shown recently that the EPR argument is removed, in an interpretation-independent way, by taking into account the fact that the Standard Model of Particle Physics prevents the production of entangled states with a definite number of particles. This result is used here to argue in favor of a statistical interpretation of QFT and to show that it allows for a full reconciliation with locality and causality. Within such an interpretation, as Ballentine and Jarret pointed out long ago, Bell's theorem does not demonstrate any nonlocality. (author)

Reasons why specialist doctors undertake rural outreach services: an Australian cross-sectional study.

Science.gov (United States)

O'Sullivan, Belinda G; McGrail, Matthew R; Stoelwinder, Johannes U

2017-01-07

The purpose of the study is to explore the reasons why specialist doctors travel to provide regular rural outreach services, and whether reasons relate to (1) salaried or private fee-for-service practice and (2) providing rural outreach services in more remote locations. A national cross-sectional study of specialist doctors from the Medicine in Australia: Balancing Employment and Life (MABEL) survey in 2014 was implemented. Specialists providing rural outreach services self-reported on a 5-point scale their level of agreement with five reasons for participating. Chi-squared analysis tested association between agreement and variables of interest. Of 567 specialists undertaking rural outreach services, reasons for participating include to grow the practice (54%), maintain a regional connection (26%), provide complex healthcare (18%), healthcare for disadvantaged people (12%) and support rural staff (6%). Salaried specialists more commonly participated to grow the practice compared with specialists in fee-for-service practice (68 vs 49%). This reason was also related to travelling further and providing outreach services in outer regional/remote locations. Private fee-for-service specialists more commonly undertook outreach services to provide complex healthcare (22 vs 14%). Specialist doctors undertake rural outreach services for a range of reasons, mainly to complement the growth and diversity of their main practice or maintain a regional connection. Structuring rural outreach around the specialist's main practice is likely to support participation and improve service distribution.

Economic motivation of households to undertake private precautionary measures against floods

Science.gov (United States)

Kreibich, H.; Christenberger, S.; Schwarze, R.

2011-02-01

Flood damage is on the increase due to a combination of growing vulnerability and a changing climate. This trend can be mitigated only through significantly improved flood risk management which, alongside the efforts of public authorities, will include improvements in the mitigation measures adopted by private households. Economically "reasonable" efforts to self-insure and self-protect should be expected from households before the government steps in with publicly-funded relief programmes. To gain a deeper understanding of the benefits of households' precautionary measures, telephone interviews with private home owners were conducted in the Elbe and Danube catchments in Germany after the floods of 2002 and again after the floods in 2005 and 2006. Only detached, solid single-family houses were included in this study, which is based on 759 interviews. In addition, market-based cost assessments were solicited based on a "model building". Expert interviews and a literature review - including catalogues and price lists for building materials and household appliances - were used as back-up information for the cost assessments. The comparison of costs and benefits shows that large investments, such as building a sealed cellar, are only economically efficient if the building is flooded very frequently, that is, if it is located in a high flood risk area. In such areas it would be preferable in economic terms not to build a new house at all - or else to build a house without a cellar. Small investments, however, such as oil tank protection, can prevent serious damage at low cost. Such investments are still profitable even if the building is flooded every 50 years or less on average. It could be argued that these low-cost measures should be made mandatory through the enforcement of building codes. Financial incentives built into insurance contracts coupled with limits set on governmental relief programmes would provide an economic motivation for people to invest in

Economic motivation of households to undertake private precautionary measures against floods

Directory of Open Access Journals (Sweden)

H. Kreibich

2011-02-01

Full Text Available Flood damage is on the increase due to a combination of growing vulnerability and a changing climate. This trend can be mitigated only through significantly improved flood risk management which, alongside the efforts of public authorities, will include improvements in the mitigation measures adopted by private households. Economically "reasonable" efforts to self-insure and self-protect should be expected from households before the government steps in with publicly-funded relief programmes. To gain a deeper understanding of the benefits of households' precautionary measures, telephone interviews with private home owners were conducted in the Elbe and Danube catchments in Germany after the floods of 2002 and again after the floods in 2005 and 2006. Only detached, solid single-family houses were included in this study, which is based on 759 interviews. In addition, market-based cost assessments were solicited based on a "model building". Expert interviews and a literature review – including catalogues and price lists for building materials and household appliances – were used as back-up information for the cost assessments. The comparison of costs and benefits shows that large investments, such as building a sealed cellar, are only economically efficient if the building is flooded very frequently, that is, if it is located in a high flood risk area. In such areas it would be preferable in economic terms not to build a new house at all – or else to build a house without a cellar. Small investments, however, such as oil tank protection, can prevent serious damage at low cost. Such investments are still profitable even if the building is flooded every 50 years or less on average. It could be argued that these low-cost measures should be made mandatory through the enforcement of building codes. Financial incentives built into insurance contracts coupled with limits set on governmental relief programmes would provide an economic motivation for

The Costs and Benefits of Undertaking Adult Education Courses from the Perspective of the Individual

Science.gov (United States)

AONTAS The National Adult Learning Organisation, 2009

2009-01-01

The aim of this study is to examine the costs and benefits of undertaking adult education courses from the perspective of the individual, using three different case studies. This will give a snapshot of the benefits and the types of costs incurred by three adult learners. Three individuals were contacted by Aontas and were asked if they would be…

Implementation of energy-saving policies in China: How local governments assisted industrial enterprises in achieving energy-saving targets

International Nuclear Information System (INIS)

Zhao, Xiaofan; Li, Huimin; Wu, Liang; Qi, Ye

2014-01-01

Local governments have replaced the national ministries that are in charge of various industries to become the primary implementer of energy-saving policies in China since 2000. This paper employs a case study-based approach to demonstrate the significance of local governments’ policy measures in assisting industrial enterprises with energy-saving activities in China. Based on the longitudinal case of the Jasmine Thermal Electric Power Company, this paper hypothesizes that sub-national governments have played a major role in implementing energy-saving policies in China since the 11th Five-year-plan period. A wide range of provincial and municipal agencies collaborated in implementing five types of policy measures – informational policy, skill building, improved enforcement of central directives, price adjustment, and funding – that reduced barriers to energy saving and motivated active pursuit of energy-saving activities at industrial enterprises. The case study demonstrates how an enterprise and local governments work together to achieve the enterprise's energy-saving target. The authors will investigate the hypothesis of this paper in the context of multiple case studies that they plan to undertake in the future. - Highlights: • We employ a case study-based approach to study policy implementation in China. • Local governments have played a major role in implementing energy-saving policies. • Local public agencies collaborated in implementing five types of policy measures. • Local policy measures reduced barriers to energy saving at industrial enterprises. • Enterprises and local governments work together to achieve energy-saving targets

A Phytase Enzyme-Based Biochemistry Practical Particularly Suited to Students Undertaking Courses in Biotechnology and Environmental Science

Science.gov (United States)

Boyce, Angela; Casey, Anne; Walsh, Gary

2004-01-01

Courses in introductory biochemistry invariably encompass basic principles of enzymology, with reinforcement of lecture-based material in appropriate laboratory practicals. Students undertaking practical classes are more enthusiastic, and generally display improved performance, when the specific experiments undertaken show direct relevance to…

EU program fuel cells in 2012 - FCH JU Fuel Cell and Hydrogen Joint Undertaking; EU-program braensleceller 2012 - FCH JU Fuel Cell and Hydrogen Joint Undertaking

Energy Technology Data Exchange (ETDEWEB)

Ridell, Bengt

2013-03-15

An EU activity in fuel cell and hydrogen field are gathered since 2008 in a so called JU, Joint Undertaking, or as it is also referred to as JTI Joint Technology Initiative. The program will run 2008 - 2013 and covers in total 940 MEUR of which the EU Commission is funding 470 MEUR. The activities of the FCH JU are governed by a Governing Board which has 12 members, five from the Commission, one of the research group and 5 from the Industrial Group. The current agreement for the FCH JU / JTI is coming to an end, and the sixth and final call was released in January 2013 with the deadline of 22 May 2013. Funding from the Commission is made through the Seventh Framework Programme FP7, which ends in 2013. Next the Eighth Framework Programme called Horizon 2020 shall continue for the years 2014 - 2020. Five of the six calls are completed. From the four first calls there are 61 projects started which 6 have been completed. From the fifth announcement is further 27 projects selected for negotiation with the Commission and they will start soon. It is now working intensively to plan Horizon 2020. There are plans to continue the new FCH JU but nothing is decided either for this or for the budget for Horizon 2020. If the FCH Joint Undertaking shall continue in its present form as a Joint Undertaking it will require clear long-term commitments from the private sector and also from the Member States. Another issue is that the long-term research should also get space it has not been the case in the present FCH JU. There are several Swedish participants in the projects and in the working groups of the program. There are Swedish participants in 11 of the 68 projects launched so far. It is in the areas of Stationary systems, Transportation and Early Markets. Project manager for the project FCGEN is Volvo Technology AB. FCH JU has its own website, www.fch-ju.eu, which opened in 2010 when the organization of the program was taken over from the Commission to permanent organisation

Effectiveness of local air quality measures; Effectiviteit van likale luchtkwaliteitsmaatregelen

Energy Technology Data Exchange (ETDEWEB)

Van Bommel, R.; Van de Poll, T. [Royal Haskoning DHV, Amersfoort (Netherlands)

2013-12-15

This article examines the effects of local air quality measures which are calculated by order of the city of Utrecht. The conclusions are that environmental zones and other local measures contribute to meet the targets and improve public health. It is also explained why this is the case, and the question is raised whether or not national measures would be better [Dutch] Dit artikel gaat in op de effecten van lokale maatregelen die zijn berekend in opdracht van de gemeente Utrecht. De conclusie: milieuzones en andere lokale maatregelen dragen bij aan het halen van normen en leveren gezondheidswinst op. Er wordt uitgelegd waarom dat zo is en de vraag wordt gesteld of landelijke maatregelen niet beter zijn.

Measurement techniques of local parameters in the downcomer boiling experiment of APR1400

International Nuclear Information System (INIS)

Lee, Eu Hwak

2004-02-01

In order to investigate boiling phenomena experimentally in the downcomer during LBLOCA with Direct Vessel Injection (DVI), which is a new Safety Injection System (SIS) of Advanced Power Reactor 1400 MW (APR1400), several parameters should be measured through the verification of their applicability. In this study, measurement techniques of the parameters are developed for the downcomer boiling experiment; local phase velocities, local void fraction and heat flux from the heated wall. The experiment has been performed with the heated wall, which has a thickness of 8.2 cm and a height of 32.5 cm and made of the same material as the prototype (APR1400) with chrome coating against rusting. The newly developed pitot tube is applied to the measurement of local liquid velocity and its calibration curve is obtained experimentally with the consideration of the effect according to water temperature and hole size changes. The developed pitot tube measures the local liquid velocity with 0.69 % deviation and it is confirmed that the water temperature and geometrical change does not affect the calibration curve. The high-speed camera and commercial software are used to measure the local vapor velocity with the accuracy of 0.06 m/sec per pixel and the procedure is confirmed in the present study. It turns out that the vapor velocity is insensitive to void size. High-speed camera and image processing are used to measure the local void fraction with the determined intensity criterion for distinguishing each phase and the results are compared with the bulk void fraction by differential pressure transmitters. In the actual experiment, the developed method is applied successfully and the results show that the criterion of intensity has little effect on local void fraction. And, it is observed that the tendency between the measured local and bulk void faction is maintained with time. In order to measure heat flux from the heated wall, two heat flux measurement techniques are developed

Measurement of transepidermal water loss in localized scleroderma.

Science.gov (United States)

Ďurčanská, Veronika; Jedličková, Hana; Vašků, Vladimír

2016-05-01

Localized scleroderma (LS) is a disease characterized by fibrotic changes in the dermis. Connective tissue growth factor and transforming growth factor β2 are the main mediators of fibrogenesis; this, along with excessive connective tissue production, affects epidermal keratinocytes, and thereby contributes to the changed quality of skin barrier. The objective of this article was to study the objective measurement of the skin barrier quality in LS with transepidermal water loss (TEWL) meter. The measurements of TEWL were performed on LS plaques in all three stages of various body locations. Control measurements were made on the contralateral side of healthy skin. The difference between TEWL in LS area and the contralateral side of the healthy skin was evaluated. A higher average TEWL 7.86 g/m(2) /h (SD 5.29) was observed on LS plaques compared with the control measurements on healthy skin 6.39 g/m(2) /h (SD 2.77). TEWL average values decreased from the inflammatory stage, through the sclerotic and to the atrophic stage. The mean difference 1.301 g/m(2) /h (SD 5.16) was found between TEWL on LS plaques and on the contralateral healthy skin in 82 measurements, i.e., a higher TEWL was observed in LS. The difference was statistically significant with p = 0.0250. Although fibrogenesis in scleroderma is localized in dermis, the skin barrier changes can be detected. © 2016 Wiley Periodicals, Inc.

Study of Train-Side Passive Magnetic Measurements with Applications to Train Localization

Directory of Open Access Journals (Sweden)

Oliver Heirich

2017-01-01

Full Text Available Passive magnetic sensors measure the magnetic field density in three axes and are often integrated on a single chip. These low-cost sensors are widely used in car navigation as well as in battery powered navigation equipment such as smartphones as part of an electronic compass. We focus on a train localization application with multiple, exclusively onboard sensors and a track map. This approach is considered as a base technology for future railway applications such as collision avoidance systems or autonomous train driving. In this paper, we address the following question: how beneficial are passive magnetic measurements for train localization? We present and analyze measurements of two different magnetometers recorded on a regional train at regular passenger service. We show promising correlations of the measurements with the track positions and the traveled switch way. The processed data reveals that the railway environment has repeatable, location-dependent magnetic signatures. This is considered as a novel approach to train localization, as the use of these magnetic signals at first view is not obvious. The proposed methods based on passive magnetic measurements show a high potential to be integrated in new and existing train localization approaches.

Experimental study on two-dimensional film flow with local measurement methods

Energy Technology Data Exchange (ETDEWEB)

Yang, Jin-Hwa, E-mail: evo03@snu.ac.kr [Nuclear Thermal-Hydraulic Engineering Laboratory, Seoul National University, Gwanak 599, Gwanak-ro, Gwanak-gu, Seoul 151-742 (Korea, Republic of); Korea Atomic Energy Research Institute, 989-111, Daedeok-daero, Yuseong-gu, Daejeon 305-600 (Korea, Republic of); Cho, Hyoung-Kyu [Nuclear Thermal-Hydraulic Engineering Laboratory, Seoul National University, Gwanak 599, Gwanak-ro, Gwanak-gu, Seoul 151-742 (Korea, Republic of); Kim, Seok [Korea Atomic Energy Research Institute, 989-111, Daedeok-daero, Yuseong-gu, Daejeon 305-600 (Korea, Republic of); Euh, Dong-Jin, E-mail: djeuh@kaeri.re.kr [Korea Atomic Energy Research Institute, 989-111, Daedeok-daero, Yuseong-gu, Daejeon 305-600 (Korea, Republic of); Park, Goon-Cherl [Nuclear Thermal-Hydraulic Engineering Laboratory, Seoul National University, Gwanak 599, Gwanak-ro, Gwanak-gu, Seoul 151-742 (Korea, Republic of)

2015-12-01

Highlights: • An experimental study on the two-dimensional film flow with lateral air injection was performed. • The ultrasonic thickness gauge was used to measure the local liquid film thickness. • The depth-averaged PIV (Particle Image Velocimetry) method was applied to measure the local liquid film velocity. • The uncertainty of the depth-averaged PIV was quantified with a validation experiment. • Characteristics of two-dimensional film flow were classified following the four different flow patterns. - Abstract: In an accident condition of a nuclear reactor, multidimensional two-phase flows may occur in the reactor vessel downcomer and reactor core. Therefore, those have been regarded as important issues for an advanced thermal-hydraulic safety analysis. In particular, the multi-dimensional two-phase flow in the upper downcomer during the reflood phase of large break loss of coolant accident appears with an interaction between a downward liquid and a transverse gas flow, which determines the bypass flow rate of the emergency core coolant and subsequently, the reflood coolant flow rate. At present, some thermal-hydraulic analysis codes incorporate multidimensional modules for the nuclear reactor safety analysis. However, their prediction capability for the two-phase cross flow in the upper downcomer has not been validated sufficiently against experimental data based on local measurements. For this reason, an experimental study was carried out for the two-phase cross flow to clarify the hydraulic phenomenon and provide local measurement data for the validation of the computational tools. The experiment was performed in a 1/10 scale unfolded downcomer of Advanced Power Reactor 1400 (APR1400). Pitot tubes, a depth-averaged PIV method and ultrasonic thickness gauge were applied for local measurement of the air velocity, the liquid film velocity and the liquid film thickness, respectively. The uncertainty of the depth-averaged PIV method for the averaged

Experimental study on two-dimensional film flow with local measurement methods

International Nuclear Information System (INIS)

Yang, Jin-Hwa; Cho, Hyoung-Kyu; Kim, Seok; Euh, Dong-Jin; Park, Goon-Cherl

2015-01-01

Highlights: • An experimental study on the two-dimensional film flow with lateral air injection was performed. • The ultrasonic thickness gauge was used to measure the local liquid film thickness. • The depth-averaged PIV (Particle Image Velocimetry) method was applied to measure the local liquid film velocity. • The uncertainty of the depth-averaged PIV was quantified with a validation experiment. • Characteristics of two-dimensional film flow were classified following the four different flow patterns. - Abstract: In an accident condition of a nuclear reactor, multidimensional two-phase flows may occur in the reactor vessel downcomer and reactor core. Therefore, those have been regarded as important issues for an advanced thermal-hydraulic safety analysis. In particular, the multi-dimensional two-phase flow in the upper downcomer during the reflood phase of large break loss of coolant accident appears with an interaction between a downward liquid and a transverse gas flow, which determines the bypass flow rate of the emergency core coolant and subsequently, the reflood coolant flow rate. At present, some thermal-hydraulic analysis codes incorporate multidimensional modules for the nuclear reactor safety analysis. However, their prediction capability for the two-phase cross flow in the upper downcomer has not been validated sufficiently against experimental data based on local measurements. For this reason, an experimental study was carried out for the two-phase cross flow to clarify the hydraulic phenomenon and provide local measurement data for the validation of the computational tools. The experiment was performed in a 1/10 scale unfolded downcomer of Advanced Power Reactor 1400 (APR1400). Pitot tubes, a depth-averaged PIV method and ultrasonic thickness gauge were applied for local measurement of the air velocity, the liquid film velocity and the liquid film thickness, respectively. The uncertainty of the depth-averaged PIV method for the averaged

Local carbon diffusion coefficient measurement in the S-1 spheromak

International Nuclear Information System (INIS)

Mayo, R.M.; Levinton, F.M.; Meyerhofer, D.D.; Chu, T.K.; Paul, S.F.; Yamada, M.

1988-10-01

The local carbon diffusion coefficient was measured in the S - 1 spheromak by detecting the radial spread of injected carbon impurity. The radial impurity density profile is determined by the balance of ionization and diffusion. Using measured local electron temperature T/sub e/ and density n/sub e/, the ionization rate is determined from which the particle diffusion coefficient is inferred. The results found in this work are consistent with Bohm diffusion. The absolute magnitude of D/sub /perpendicular// was determined to be (4/approximately/6) /times/ D/sub Bohm/. 25 refs., 13 figs., 2 tabs

Automated measurement of local white matter lesion volume

DEFF Research Database (Denmark)

van der Lijn, Fedde; Verhaaren, Benjamin F. J.; Ikram, M. Arfan

2012-01-01

in a periventricular region close to the ventricles and a subcortical zone further away. In this work we present a novel automated method for local white matter lesion volume quantification in magnetic resonance images. The method segments and measures the white matter lesion volume in 43 regions defined...

The geometrically averaged density of states calculated from the local Green's function as a measure of localization

International Nuclear Information System (INIS)

Wortis, R.; Song Yun; Atkinson, W.A.

2008-01-01

With the goal of measuring localization in disordered interacting systems, we examine the finite-size scaling of the geometrically averaged density of states calculated from the local Green's function with finite energy resolution. Our results show that, unlike in a simple energy binning procedure, there is no limit in which the finite energy resolution is irrelevant

Sensitivity of resistive and Hall measurements to local inhomogeneities

DEFF Research Database (Denmark)

Koon, Daniel W.; Wang, Fei; Petersen, Dirch Hjorth

2014-01-01

We derive exact, analytic expressions for the sensitivity of sheet resistance and Hall sheet resistance measurements to local inhomogeneities for the cases of nonzero magnetic fields, strong perturbations, and perturbations over a finite area, extending our earlier results on weak perturbations. ...... simulations on both a linear four-point probe array on a large circular disc and a van der Pauw square geometry. Furthermore, the results also agree well with Náhlík et al. published experimental results for physical holes in a circular copper foil disc.......We derive exact, analytic expressions for the sensitivity of sheet resistance and Hall sheet resistance measurements to local inhomogeneities for the cases of nonzero magnetic fields, strong perturbations, and perturbations over a finite area, extending our earlier results on weak perturbations. We...

Measurement-induced localization of relative degrees of freedom

International Nuclear Information System (INIS)

Cable, Hugo; Knight, Peter L.; Rudolph, Terry

2005-01-01

We present a comprehensive study, using both analytical and numerical methods, of measurement-induced localization of relational degrees of freedom. Looking first at the interference of two optical modes, we find that the localization of the relative phase can be as good for mixed states--in particular, for two initially Poissonian or thermal states--as for the well-known case of two Fock states. In a realistic setup the localization for mixed states is robust and experimentally accessible, and we discuss applications to superselection rules. For an ideal setup we show how a relational Schroedinger cat state emerges and investigate circumstances under which such a state is destroyed. In our second example we consider the localization of relative atomic phase between two Bose Einstein condensates, looking particularly at the build up of spatial interference patterns, an area which has attracted much attention since the work of Javanainen and Yoo. We show that the relative phase localizes much faster than was intimated in previous studies focusing on the emerging interference pattern itself. Finally, we explore the localization of relative spatial parameters discussed in recent work by Rau, Dunningham, and Burnett. We retain their models of indistinguishable scattering but make different assumptions. In particular we consider the case of a real distant observer monitoring light scattering off two particles, who records events only from a narrow field of view. The localization is only partial regardless of the number of observations. This paper contributes to the wider debate on relationism in quantum mechanics, which treats fundamental concepts - reference frames and conservation laws - from a fully quantum and operational perspective

A measure of localization properties of one-dimensional single electron lattice systems

International Nuclear Information System (INIS)

Gong, Longyan; Li, Wenjia; Zhao, Shengmei; Cheng, Weiwen

2016-01-01

We propose a novel quantity to measure the degree of localization properties of various types of one-dimension single electron states. The quantity includes information about the spatial variation of probability density of quantum states. Numerical results show that it can distinguish localized states from delocalized ones, so it can be used as a fruitful index to monitor the localization–delocalization transition. Comparing with existing measures, such as geometric average density of states, inverse participation ratio, and quantum information entropies, our proposed quantity has some advantages over them. - Highlights: • A novel quantity is proposed to measure the degree of localization. • It includes information about the spatial variation of probability density. • It is a fruitful index to monitor the localization–delocalization transition.

Localized corrosion information using high resolution measurement devices

DEFF Research Database (Denmark)

Ambat, Rajan

2005-01-01

High performance demand for several engineering alloys and components, and miniaturization of electronics and development of MEMS requires better understanding of local corrosion characteristics frequently down to µm scale. This is because in metallic materials corrosion is a sensitive function...... in conjunction with microstructural analysis, using advanced microscopic tools, becomes very important. Corrosion of microelectronics circuits and MEMs is also a recent problem, which demands measurement resolution down to few microns as the components are extremely small, and measurement needs to be carried out...

Supporting students undertaking the Specialist Practitioner Qualification in District Nursing.

Science.gov (United States)

Ginger, Tracey; Ritchie, Georgina

2017-11-02

The ever-evolving role of the Specialist Practitioner Qualified District Nurse (SPQDN) presents an increasing number of challenges for Practice Teachers and mentors in preparing SPQDN students for the elevated level clinical and transformational leadership necessary to ensure high-quality patient care. The daily challenges of clinical practice within the community nursing setting in addition to undertaking educational interventions in the clinical arena demand that a structured approach to supervision and mentorship is crucial. Employing learning plans to assess individual students learning needs, prepare plans for educational developments and interventions and evaluate a student's progress can be a helpful tool in aiding the learning journey for both the SPQDN student and Practice Teacher or mentor. This article examines how and why a structured learning plan may be used in supporting learning and competency in achieving the necessary level of practice to meet the requirements of the SPQDN.

Study of localized photon source in space of measures

International Nuclear Information System (INIS)

Lisi, M.

2010-01-01

In this paper we study a three-dimensional photon transport problem in an interstellar cloud, with a localized photon source inside. The problem is solved indirectly, by defining the adjoint of an operator acting on an appropriate space of continuous functions. By means of sun-adjoint semi groups theory of operators in a Banach space of regular Borel measures, we prove existence and uniqueness of the solution of the problem. A possible approach to identify the localization of the photon source is finally proposed.

Outlier Detection in GNSS Pseudo-Range/Doppler Measurements for Robust Localization

Directory of Open Access Journals (Sweden)

Salim Zair

2016-04-01

Full Text Available In urban areas or space-constrained environments with obstacles, vehicle localization using Global Navigation Satellite System (GNSS data is hindered by Non-Line Of Sight (NLOS and multipath receptions. These phenomena induce faulty data that disrupt the precise localization of the GNSS receiver. In this study, we detect the outliers among the observations, Pseudo-Range (PR and/or Doppler measurements, and we evaluate how discarding them improves the localization. We specify a contrario modeling for GNSS raw data to derive an algorithm that partitions the dataset between inliers and outliers. Then, only the inlier data are considered in the localization process performed either through a classical Particle Filter (PF or a Rao-Blackwellization (RB approach. Both localization algorithms exclusively use GNSS data, but they differ by the way Doppler measurements are processed. An experiment has been performed with a GPS receiver aboard a vehicle. Results show that the proposed algorithms are able to detect the ‘outliers’ in the raw data while being robust to non-Gaussian noise and to intermittent satellite blockage. We compare the performance results achieved either estimating only PR outliers or estimating both PR and Doppler outliers. The best localization is achieved using the RB approach coupled with PR-Doppler outlier estimation.

Locally specific measures for employment aimed at regional development

Directory of Open Access Journals (Sweden)

Vladimir Cini

2013-12-01

Full Text Available The oldest and largest sub-region in the world functioning on the principle of economic union is the European Union. The creation of a single market has initiated the process of conditional adjustment of markets in the EU member states, which has a significant impact on the social welfare of its citizens. It is necessary to tackle this issue by joint efforts within the European Union. As globalization processes push for economic integration and development of competitive advantage, the regions will have to make some challenging adjustments. The development tends to concentrate in highly competitive regions, while regions in the periphery lag behind. However, this pertains not only to the economic lag, but also to a potential negative political situation. Locally specific active employment policy measures are a continuation of the effort to make these measures more flexible. They refer to the Joint Assessment of Employment Policy Priorities and the IPA Human Resources Development Operational Programme - a regional policy instrument of the European Union. Both documents highlight the issue of disproportional development of regions, which requires special local measures and active labour market policy programmes. To reduce regional differences in development, it is necessary to invest more resources in the regions that lag behind. In this particular case, this means the counties in Croatia with high unemployment rates, a large number of registered unemployed persons and low employment rate. Consequently, this paper explains the importance of the adoption of locally specific measures for employment, which unfortunately did not take hold in the Republic of Croatia, and highlights the need for further decentralization of public services, with the aim of balancing regional development

Measurement-based local quantum filters and their ability to ...

Indian Academy of Sciences (India)

Debmalya Das

2017-05-30

May 30, 2017 ... Entanglement; local filters; quantum measurement. PACS No. 03.65 ... ties [4,5], it also plays a key role in quantum computing where it is ... Furthermore, we pro- vide an ..... Corresponding to each of these vectors, we can con-.

Augmented Lagrange Programming Neural Network for Localization Using Time-Difference-of-Arrival Measurements.

Science.gov (United States)

Han, Zifa; Leung, Chi Sing; So, Hing Cheung; Constantinides, Anthony George

2017-08-15

A commonly used measurement model for locating a mobile source is time-difference-of-arrival (TDOA). As each TDOA measurement defines a hyperbola, it is not straightforward to compute the mobile source position due to the nonlinear relationship in the measurements. This brief exploits the Lagrange programming neural network (LPNN), which provides a general framework to solve nonlinear constrained optimization problems, for the TDOA-based localization. The local stability of the proposed LPNN solution is also analyzed. Simulation results are included to evaluate the localization accuracy of the LPNN scheme by comparing with the state-of-the-art methods and the optimality benchmark of Cramér-Rao lower bound.

Atom localization and center-of-mass wave-function determination via multiple simultaneous quadrature measurements

International Nuclear Information System (INIS)

Evers, Joerg; Qamar, Shahid; Zubairy, M. Suhail

2007-01-01

We discuss localization and center-of-mass wave-function measurement of a quantum particle using multiple simultaneous dispersive interactions of the particle with different standing-wave fields. In particular, we consider objects with an internal structure consisting of a single ground state and several excited states. The transitions between ground and the corresponding excited states are coupled to the light fields in the dispersive limit, thus giving rise to a phase shift of the light field during the interaction. We show that multiple simultaneous measurements allow both an increase in the measurement or localization precision in a single direction and the performance of multidimensional measurements or localization. Further, we show that multiple measurements may relax the experimental requirements for each individual measurement

Curriculum Design, Practice and Evaluation in Ordained Local Ministry in the Diocese of Manchester

Science.gov (United States)

Bracegirdle, Christopher A.

2005-01-01

This study reviews and critiques the development of Ordained Local Ministry (OLM) in the Diocese of Manchester, United Kingdom, from the perspective of the tutor for communications and preaching. I undertake this role on a part-time basis, alongside my ministry as vicar of a parish within the diocese. Through a discussion of motivations and models…

MAP Fault Localization Based on Wide Area Synchronous Phasor Measurement Information

Science.gov (United States)

Zhang, Yagang; Wang, Zengping

2015-02-01

In the research of complicated electrical engineering, the emergence of phasor measurement units (PMU) is a landmark event. The establishment and application of wide area measurement system (WAMS) in power system has made widespread and profound influence on the safe and stable operation of complicated power system. In this paper, taking full advantage of wide area synchronous phasor measurement information provided by PMUs, we have carried out precise fault localization based on the principles of maximum posteriori probability (MAP). Large numbers of simulation experiments have confirmed that the results of MAP fault localization are accurate and reliable. Even if there are interferences from white Gaussian stochastic noise, the results from MAP classification are also identical to the actual real situation.

Radially localized measurements of superthermal electrons using oblique electron cyclotron emission

International Nuclear Information System (INIS)

Preische, S.; Efthimion, P.C.; Kaye, S.M.

1996-05-01

It is shown that radial localization of optically tin Electron Cyclotron Emission from superthermal electrons can be imposed by observation of emission upshifted from the thermal cyclotron resonance in the horizontal midplane of a tokamak. A new and unique diagnostic has been proposed and operated to make radially localized measurements of superthermal electrons during Lower Hybrid Current Drive on the PBX-M tokamak. The superthermal electron density profile as well as moments of the electron energy distribution as a function of radius are measured during Lower Hybrid Current Drive. The time evolution of these measurements after the Lower Hybrid power is turned off are given and the observed behavior reflects the collisional isotropization of the energy distribution and radial diffusion of the spatial profile

Local texture measurements with the scanning electron microscope

International Nuclear Information System (INIS)

Gottstein, G.; Engler, O.

1993-01-01

Techniques for convenient measurement of the crystallographic orientation of small volumes in bulk samples by electron diffraction in the SEM are discussed. They make use of Selected Area Electron Channelling Patterns (SAECP) and Electron Back Scattering Patterns (EBSP). The principle of pattern formation as well as measuring and evaluation procedure are introduced. The methods offer a viable procedure for obtaining information on the spatial arrangement of orientations, i.e. on orientation topography. Thus, they provide a new level of information on crystallographic texture. An application of the techniques for local texture measurements is demonstrated by an example, namely for investigation of considering the recrystallization behaviour of binary Al-1.3% Mn with large precipitates. Finally, further developments of the EBSP technique are addressed. (orig.)

Training staff to empower people with long-term conditions to undertake self care activities.

Science.gov (United States)

Bowler, Mandy

Self care can help people with long-term conditions take control of their lives. However, their interest and ability to engage with it may fluctuate over the course of an illness and many need support to undertake self care activities. A team of community matrons in NHS South of Tyne and Wear helped to develop and pilot an e-learning tool for staff, to remind them of the importance of self care and give advice on ways to support patients. The tool has since been rolled out to all staff groups.

Design parameters for measurements of local catalytic activity on surfaces

DEFF Research Database (Denmark)

Johansson, Martin; Johannessen, Tue; Jørgensen, Jan Hoffmann

2006-01-01

Computational fluid dynamics in combination with experiments is used to characterize a gas sampling device for measurements of the local catalytic activity on surfaces. The device basically consists of a quartz capillary mounted concentrically inside an aluminum tube. Reactant gas is blown toward......, the limits of the range in reaction rate, which can be Studied are estimated. (c) 2005 Elsevier B.V. All rights reserved.......Computational fluid dynamics in combination with experiments is used to characterize a gas sampling device for measurements of the local catalytic activity on surfaces. The device basically consists of a quartz capillary mounted concentrically inside an aluminum tube. Reactant gas is blown toward...... limit for the lateral resolution of the measurement, and that a flow rate of the order of 240 (ml/min)(n) is sufficient to achieve this resolution. The sensitivity is reasonable also with high flow rates, due to the presence of a pocket of stagnant gas under the tip of the capillary. Furthermore...

A Relative-Localization Algorithm Using Incomplete Pairwise Distance Measurements for Underwater Applications

Directory of Open Access Journals (Sweden)

Kae Y. Foo

2010-01-01

Full Text Available The task of localizing underwater assets involves the relative localization of each unit using only pairwise distance measurements, usually obtained from time-of-arrival or time-delay-of-arrival measurements. In the fluctuating underwater environment, a complete set of pair-wise distance measurements can often be difficult to acquire, thus hindering a straightforward closed-form solution in deriving the assets' relative coordinates. An iterative multidimensional scaling approach is presented based upon a weighted-majorization algorithm that tolerates missing or inaccurate distance measurements. Substantial modifications are proposed to optimize the algorithm, while the effects of refractive propagation paths are considered. A parametric study of the algorithm based upon simulation results is shown. An acoustic field-trial was then carried out, presenting field measurements to highlight the practical implementation of this algorithm.

An infrared small target detection method based on multiscale local homogeneity measure

Science.gov (United States)

Nie, Jinyan; Qu, Shaocheng; Wei, Yantao; Zhang, Liming; Deng, Lizhen

2018-05-01

Infrared (IR) small target detection plays an important role in the field of image detection area owing to its intrinsic characteristics. This paper presents a multiscale local homogeneity measure (MLHM) for infrared small target detection, which can enhance the performance of IR small target detection system. Firstly, intra-patch homogeneity of the target itself and the inter-patch heterogeneity between target and the local background regions are integrated to enhance the significant of small target. Secondly, a multiscale measure based on local regions is proposed to obtain the most appropriate response. Finally, an adaptive threshold method is applied to small target segmentation. Experimental results on three different scenarios indicate that the MLHM has good performance under the interference of strong noise.

Hybridity in the Higher Education of Ukraine: Global Logic or Local Idiosyncrasy?

Directory of Open Access Journals (Sweden)

Olga Gomilko

2016-10-01

Full Text Available Hybridity as a heuristic concept of the globalization and post-colonialism discourses is used for 1 understanding the logic of the modernization of the higher education of Ukraine (HEU, and 2 for making a meaningful diagnosis of those educational pathologies that restrain it. The educational pathologies are considered as the conditioned by post-coloniality and post-totalitarianism departure or deviation from the undertaking of the original missions of higher education (HE: “to educate, to train and to undertake research” (World Declaration on Higher Education for the Twenty-First Century: Vision and Action, 1998. Modernity as a philosophical concept and normative ideal that focus on increasing rational components in a human life is exploited for showing the ways of carrying out the missions of HE by adjusting particular patterns of rationality to the needs and wants of society. However, globalization puts modernity under challenges due to its bent toward de/or non-modern cultural practices. That’s why the logic of modernization in HEU acquires hybrid characteristics by fitting together different, multiple, opposing educational models and standards – post-colonial, post-totalitarian, modern, de/non-modern and global through the local acceptance. Therefore, the locality turns into a focal point of the modernization of HEU in a global context. The modernization of HEU reveals the ambivalent meaning of hybridity in its producing and destructive potential, i.e. as a global logic or a local idiosyncrasy.

Inequality measures perform differently in global and local assessments: An exploratory computational experiment

Science.gov (United States)

Chiang, Yen-Sheng

2015-11-01

Inequality measures are widely used in both the academia and public media to help us understand how incomes and wealth are distributed. They can be used to assess the distribution of a whole society-global inequality-as well as inequality of actors' referent networks-local inequality. How different is local inequality from global inequality? Formalizing the structure of reference groups as a network, the paper conducted a computational experiment to see how the structure of complex networks influences the difference between global and local inequality assessed by a selection of inequality measures. It was found that local inequality tends to be higher than global inequality when population size is large; network is dense and heterophilously assorted, and income distribution is less dispersed. The implications of the simulation findings are discussed.

Undertaking and writing research that is important, targeted, and the best you can do.

Science.gov (United States)

McLeod, Sharynne

2014-04-01

Conducting and writing research is a privilege. It is a privilege because researchers can change lives through their findings and can influence public knowledge and debate. It is also a privilege because researchers are reliant on the time and goodwill of participants (and colleagues), and research is often underpinned by funding raised by the public, either through taxes or philanthropic donations. This privilege comes with responsibility. Researchers have a responsibility to undertake research that is important, targeted, and of high quality. This editorial aims to inspire, challenge, and bolster the research efforts of individuals and teams.

The development of power generation by electricity supply undertakings and industries in Western Europe

International Nuclear Information System (INIS)

Cura, H.

1998-01-01

Following the events of recent years - the opening up of the east, efforts to stimulate international competition - the Western European electricity industry is strongly on the move. In spite of the non-uniformity of the electricity supply structures in the individual countries, the trend towards liberalization of the electricity market is characterized by different forms of expression. Against this background, this paper provides a review of the status and prospects of electricity demand developments and of primary energy supply. It considers the consequences which thereby arise for the power plant inventory of electricity supply undertakings and industries. (orig.) [de

Measurement of Local Gravity via a Cold Atom Interferometer

International Nuclear Information System (INIS)

Zhou Lin; Xiong Zong-Yuan; Yang Wei; Tang Biao; Peng Wen-Cui; Wang Yi-Bo; Xu Peng; Wang Jin; Zhan Ming-Sheng

2011-01-01

We demonstrate a precision measurement of local gravity acceleration g in Wuhan by a compact cold atom interferometer. The atom interferometer is in vertical Mach—Zehnder configuration realized using a π/2 - π - π/2 Raman pulse sequence. Cold atoms were prepared in a magneto-optical trap, launched upward to form an atom fountain, and then coherently manipulated to interfere by stimulated Raman transition. Population signal vs Raman laser phase was recorded as interference fringes, and the local gravity was deduced from the interference signal. We have obtained a resolution of 7 × 10 −9 g after an integration time of 236s under the best vibrational environment conditions. The absolute g value was derived from the chirp rate with a difference of 1.5 × 10 −7 g compared to the gravity reference value. The tidal phenomenon was observed by continuously monitoring the local gravity over 123 h. (atomic and molecular physics)

Frequency-resolved interferometric measurement of local density fluctuations for turbulent combustion analysis

International Nuclear Information System (INIS)

Köberl, S; Giuliani, F; Woisetschläger, J; Fontaneto, F

2010-01-01

A validation of a novel interferometric measurement technique for the frequency-resolved detection of local density fluctuation in turbulent combustion analysis was performed in this work. Two laser vibrometer systems together with a signal analyser were used to obtain frequency spectra of density fluctuations across a methane-jet flame. Since laser vibrometry is based on interferometric techniques, the derived signals are path-integrals along the measurement beam. To obtain local frequency spectra of density fluctuations, long-time-averaged measurements from each of the two systems were performed using correlation functions and cross spectra. Results were compared to data recorded by standard interferometric techniques for validation purposes. Additionally, Raman scattering and laser Doppler velocimetry were used for flame characterization

What factors influence community-dwelling older people’s intent to undertake multifactorial fall prevention programs?

Directory of Open Access Journals (Sweden)

Hill KD

2014-11-01

Full Text Available Keith D Hill,1,2 Lesley Day,3 Terry P Haines4,5 1School of Physiotherapy and Exercise Science, Faculty of Health Sciences, Curtin University, Perth, WA, Australia; 2National Ageing Research Institute, Royal Melbourne Hospital, Parkville, VIC, Australia; 3Falls Prevention Research Unit, Monash Injury Research Institute, Monash University, VIC, Australia; 4Allied Health Research Unit, Southern Health, Cheltenham, VIC, Australia; 5Physiotherapy Department, Faculty of Medicine, Nursing, and Health Sciences, Monash University, VIC, Australia Purpose: To investigate previous, current, or planned participation in, and perceptions toward, multifactorial fall prevention programs such as those delivered through a falls clinic in the community setting, and to identify factors influencing older people’s intent to undertake these interventions.Design and methods: Community-dwelling people aged >70 years completed a telephone survey. Participants were randomly selected from an electronic residential telephone listing, but purposeful sampling was used to include equal numbers with and without common chronic health conditions associated with fall-related hospitalization. The survey included scenarios for fall prevention interventions, including assessment/multifactorial interventions, such as those delivered through a falls clinic. Participants were asked about previous exposure to, or intent to participate in, the interventions. A path model analysis was used to identify factors associated with intent to participate in assessment/multifactorial interventions.Results: Thirty of 376 participants (8.0% reported exposure to a multifactorial falls clinic-type intervention in the past 5 years, and 16.0% expressed intention to undertake this intervention. Of the 132 participants who reported one or more falls in the past 12 months, over one-third were undecided or disagreed that a falls clinic type of intervention would be of benefit to them. Four elements

Local and omnibus goodness-of-fit tests in classical measurement error models

KAUST Repository

Ma, Yanyuan; Hart, Jeffrey D.; Janicki, Ryan; Carroll, Raymond J.

2010-01-01

We consider functional measurement error models, i.e. models where covariates are measured with error and yet no distributional assumptions are made about the mismeasured variable. We propose and study a score-type local test and an orthogonal

Measuring true localization accuracy in super resolution microscopy with DNA-origami nanostructures

International Nuclear Information System (INIS)

Reuss, Matthias; Blom, Hans; Brismar, Hjalmar; Fördős, Ferenc; Högberg, Björn; Öktem, Ozan

2017-01-01

A common method to assess the performance of (super resolution) microscopes is to use the localization precision of emitters as an estimate for the achieved resolution. Naturally, this is widely used in super resolution methods based on single molecule stochastic switching. This concept suffers from the fact that it is hard to calibrate measures against a real sample (a phantom), because true absolute positions of emitters are almost always unknown. For this reason, resolution estimates are potentially biased in an image since one is blind to true position accuracy, i.e. deviation in position measurement from true positions. We have solved this issue by imaging nanorods fabricated with DNA-origami. The nanorods used are designed to have emitters attached at each end in a well-defined and highly conserved distance. These structures are widely used to gauge localization precision. Here, we additionally determined the true achievable localization accuracy and compared this figure of merit to localization precision values for two common super resolution microscope methods STED and STORM. (paper)

Procedure of non-contacting local mass density and mass density distribution measurements

International Nuclear Information System (INIS)

Menzel, M.; Winkler, K.

1985-01-01

The invention has been aimed at a procedure of non-contacting local mass density and/or mass density distribution measurements i.e. without the interfering influence of sensors or probes. It can be applied to installations, apparatuses and pipings of chemical engineering, to tank constructions and transportation on extreme temperature and/or pressure conditions and aggressive media influences respectively. The procedure has utilized an ionizing quantum radiation whereby its unknown weakening and scattering is compensated by a suitable combination of scattering and transmission counter rate measurements in such a way that the local mass densities and the mass density distribution respectively are determinable

Measurement of Local Deformations in Steel Monostrands Using Digital Image Correlation

DEFF Research Database (Denmark)

Winkler, Jan; Fischer, Gregor; Georgakis, Christos T.

2014-01-01

The local deformation mechanisms in steel monostrands have a significant influence on their fatigue life and failure mode. However, the observation and quantification of deformations in monostrands experiencing axial and transverse deformations is challenging because of their complex geometry......, difficulties with the placement of strain gauges in the vicinity of the anchorage, and, most importantly, the relatively small magnitude of deformation occurring in the monostrand. This paper focuses on the measurement of localized deformations in high-strength steel monostrands using the digital image...... correlation (DIC) technique. The presented technique enables the measurement of individual wire strains along the length of the monostrand and also provides quantitative information on the relative movement between individual wires, leading to a more in-depth understanding of the underlying fatigue mechanisms...

A new support measure to quantify the impact of local optima in phylogenetic analyses.

KAUST Repository

Brammer, Grant

2011-09-29

Phylogentic analyses are often incorrectly assumed to have stabilized to a single optimum. However, a set of trees from a phylogenetic analysis may contain multiple distinct local optima with each optimum providing different levels of support for each clade. For situations with multiple local optima, we propose p-support which is a clade support measure that shows the impact optima have on a final consensus tree. Our p-support measure is implemented in our PeakMapper software package. We study our approach on two published, large-scale biological tree collections. PeakMapper shows that each data set contains multiple local optima. p-support shows that both datasets contain clades in the majority consensus tree that are only supported by a subset of the local optima. Clades with low p-support are most likely to benefit from further investigation. These tools provide researchers with new information regarding phylogenetic analyses beyond what is provided by other support measures alone.

Determination of Intrinsic Magnetic Response from Local Measurements of Fringing Fields

OpenAIRE

Wen, Bo; Millis, Andrew J.; Pardo, Enric; Subedi, Pradeep; Kent, Andrew D.; Yeshurun, Yosi; Sarachik, Myriam P.

2014-01-01

Micron-sized Hall bars and micro-SQUIDs are now used routinely to measure the local static and dynamic magnetic response with micron-scale spatial resolution. While this provides a powerful new tool, determining the intrinsic magnetization presents new challenges, as it requires correcting for demagnetization fields that vary widely with position on a sample. In this paper we develop a method to correct for the demagnetization effect at local points of a rectangular prism shaped sample using ...

Profile measurements of localized fast electrons and ions in TORE SUPRA

International Nuclear Information System (INIS)

Basiuk, V.; Roubin, J.P.; Becoulet, A.; Carrasco, J.; Martin, G.; Moreau, D.; Saoutic, B.

1992-01-01

The strong toroidal and poloidal anisotropy of the heat flux to the first wall of Tore Supra during additional heating has been related to suprathermal particle losses induced by the TF ripple. In this paper we describe a new system of electric collectors designed to diagnose these localized particles and we analyse measurements performed during LHCD, ICRH and NBI heating. The interaction of fast particles created by additional heating with the TF ripple perturbation in Tore Supra has been analyzed by a direct measurement of the localized particles. The good confinement region has been identified thanks to a peak in the measured current profiles and is in agreement with theory. During LHCD and ICRH, the global losses are weak but strongly anisotropic leading to hot spots at the wall. During ICRH, an ejection of fast ions by the sawteeth towards peripheral zones where they get lost in the ripple has been seen. This is a possible scenario of α particle losses in a reactor

Local and omnibus goodness-of-fit tests in classical measurement error models

KAUST Repository

Ma, Yanyuan

2010-09-14

We consider functional measurement error models, i.e. models where covariates are measured with error and yet no distributional assumptions are made about the mismeasured variable. We propose and study a score-type local test and an orthogonal series-based, omnibus goodness-of-fit test in this context, where no likelihood function is available or calculated-i.e. all the tests are proposed in the semiparametric model framework. We demonstrate that our tests have optimality properties and computational advantages that are similar to those of the classical score tests in the parametric model framework. The test procedures are applicable to several semiparametric extensions of measurement error models, including when the measurement error distribution is estimated non-parametrically as well as for generalized partially linear models. The performance of the local score-type and omnibus goodness-of-fit tests is demonstrated through simulation studies and analysis of a nutrition data set.

Undertaking qualitative health research in social virtual worlds.

Science.gov (United States)

McElhinney, Evelyn; Cheater, Francine M; Kidd, Lisa

2014-06-01

This paper discusses the methodological challenges of using the 3D social virtual world Second Life for research and offers some solutions on a range of research issues including research ethics committee approval, gaining consent, recruitment of sample, data collection and engagement with 'in - world culture'. The attraction of social virtual worlds to researchers is their ability to mimic the physical world, as they, are seen as 'places' where people have a feeling of presence (being there) and social presence (being there with others) through the use of a 'customisable' avatar (digital self-representation). Emerging research demonstrating the persuasive nature of avatars on health behaviours through virtual worlds, online games and the 3D web has increased the use of and interest in these areas for delivering health information, advice and support. However, conducting research can be challenging in a 3D world where people are represented as anonymous avatars in an environment unlike any other online media. 25 semi-structured interviews were conducted in Second Life from September 2011-June 2012. Nurses wishing to undertake research in social virtual worlds should spend time in-world to acquire technical skills and gain an understanding of the culture of the world. Our experience of an interview-based study in virtual worlds indicates that researchers require several virtual world technical skills to create innovative tools to recruit, gain consent and collect data and an understanding of in-world culture, language and social norms to increase the chances of successful research. © 2013 John Wiley & Sons Ltd.

Local photoconductivity of microcrystalline silicon thin films measured by conductive atomic force microscopy

Energy Technology Data Exchange (ETDEWEB)

Ledinsky, Martin; Fejfar, Antonin; Vetushka, Aliaksei; Stuchlik, Jiri; Rezek, Bohuslav; Kocka, Jan [Institute of Physics, Academy of Sciences of the Czech Republic, v.v.i. Cukrovarnicka 10, 162 00 Praha 6 (Czech Republic)

2011-11-15

Local currents measured under standard conductive atomic force microscopy (C-AFM) conditions on microcrystalline silicon ({mu}c-Si:H) thin films were studied. It was shown that the AFM detection diode illuminating the AFM cantilever (see the figure on the right side) 100 x enhanced the current flows through the photosensitive {mu}c-Si:H layer. The local current map and current-voltage characteristics were measured under dark conditions. This study enables mapping of both the dark current and photocurrent. C-AFM cantilever illuminated by the detection diode during measurement on {mu}c-Si:H thin film. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Quantitative analysis of residual protein contamination of podiatry instruments reprocessed through local and central decontamination units.

Science.gov (United States)

Smith, Gordon Wg; Goldie, Frank; Long, Steven; Lappin, David F; Ramage, Gordon; Smith, Andrew J

2011-01-10

The cleaning stage of the instrument decontamination process has come under increased scrutiny due to the increasing complexity of surgical instruments and the adverse affects of residual protein contamination on surgical instruments. Instruments used in the podiatry field have a complex surface topography and are exposed to a wide range of biological contamination. Currently, podiatry instruments are reprocessed locally within surgeries while national strategies are favouring a move toward reprocessing in central facilities. The aim of this study was to determine the efficacy of local and central reprocessing on podiatry instruments by measuring residual protein contamination of instruments reprocessed by both methods. The residual protein of 189 instruments reprocessed centrally and 189 instruments reprocessed locally was determined using a fluorescent assay based on the reaction of proteins with o-phthaldialdehyde/sodium 2-mercaptoethanesulfonate. Residual protein was detected on 72% (n = 136) of instruments reprocessed centrally and 90% (n = 170) of instruments reprocessed locally. Significantly less protein (p podiatry instruments when protein contamination is considered, though no significant difference was found in residual protein between local decontamination unit and central decontamination unit processes for Blacks files. Further research is needed to undertake qualitative identification of protein contamination to identify any cross contamination risks and a standard for acceptable residual protein contamination applicable to different instruments and specialities should be considered as a matter of urgency.

Neutrinos help reconcile Planck measurements with the local universe.

Science.gov (United States)

Wyman, Mark; Rudd, Douglas H; Vanderveld, R Ali; Hu, Wayne

2014-02-07

Current measurements of the low and high redshift Universe are in tension if we restrict ourselves to the standard six-parameter model of flat ΛCDM. This tension has two parts. First, the Planck satellite data suggest a higher normalization of matter perturbations than local measurements of galaxy clusters. Second, the expansion rate of the Universe today, H0, derived from local distance-redshift measurements is significantly higher than that inferred using the acoustic scale in galaxy surveys and the Planck data as a standard ruler. The addition of a sterile neutrino species changes the acoustic scale and brings the two into agreement; meanwhile, adding mass to the active neutrinos or to a sterile neutrino can suppress the growth of structure, bringing the cluster data into better concordance as well. For our fiducial data set combination, with statistical errors for clusters, a model with a massive sterile neutrino shows 3.5σ evidence for a nonzero mass and an even stronger rejection of the minimal model. A model with massive active neutrinos and a massless sterile neutrino is similarly preferred. An eV-scale sterile neutrino mass--of interest for short baseline and reactor anomalies--is well within the allowed range. We caution that (i) unknown astrophysical systematic errors in any of the data sets could weaken this conclusion, but they would need to be several times the known errors to eliminate the tensions entirely; (ii) the results we find are at some variance with analyses that do not include cluster measurements; and (iii) some tension remains among the data sets even when new neutrino physics is included.

In Situ Measurement of Local Hydrogen Production Rate by Bubble-Evolved Recording

Directory of Open Access Journals (Sweden)

Xiaowei Hu

2013-01-01

Full Text Available Hydrogen visibly bubbles during photocatalytic water splitting under illumination with above-bandgap radiation, which provides a direct measurement of local gas-evolving reaction rate. In this paper, optical microscopy of superfield depth was used for recording the hydrogen bubble growth on Cd0.5Zn0.5S photocatalyst in reaction liquid and illuminated with purple light. By analyzing change of hydrogen bubble size as a function of time, we understood that hydrogen bubble growth experienced two periods, which were inertia effect dominated period and diffusion effect dominated period, respectively. The tendency of hydrogen bubble growth was similar to that of the gas bubble in boiling, while the difference in bubble diameter and growth time magnitude was great. Meanwhile, we obtained the local hydrogen production rate on photocatalyst active site by measuring hydrogen bubble growth variation characteristics. This method makes it possible to confirm local actual hydrogen evolution rate quantitatively during photocatalytic water splitting.

Local deformation method for measuring element tension in space deployable structures

Directory of Open Access Journals (Sweden)

Belov Sergey

2017-01-01

Full Text Available The article describes the local deformation method to determine the tension of cord and thin membrane elements in space deployable structure as antenna reflector. Possible measuring instrument model, analytical and numerical solutions and experimental results are presented. The boundary effects on measurement results of metallic mesh reflector surface tension are estimated. The study case depicting non-uniform reflector surface tension is considered.

A cross sectional observational study of research activity of allied health teams: is there a link with self-reported success, motivators and barriers to undertaking research?

Science.gov (United States)

Wenke, Rachel J; Mickan, Sharon; Bisset, Leanne

2017-02-06

Team-based approaches to research capacity building (RCB) may be an efficient means to promote allied health research participation and activity. In order to tailor such interventions, a clearer understanding of current patterns of research participation within allied health teams is needed. Different self-report measures exist which evaluate a team's research capacity and participation, as well as associated barriers and motivators. However, it remains unclear how such measures are associated with a team's actual research activity (e.g., journal publications, funding received). In response, this observational study aimed to identify the research activity, self-reported success, and motivations and barriers to undertaking research of eight allied health professional (AHP) teams and to explore whether any relationships exist between the self-reported measures and actual research activity within each team. A total of 95 AHPs from eight teams completed the research capacity and culture survey to evaluate team success, barriers and motivators to undertaking research, and an audit of research activity from January 2013 to August 2014 was undertaken within each team. Kendell's correlation coefficients were used to determine the association between research activity (i.e., number of journal publications, ethically approved projects and funding received) and the self-reported measures. Seven out of eight teams rated their teams as having average success in research and demonstrated some form of research activity including at least two ethically approved projects. Research activity varied between teams, with funding received ranging from $0 to over $100,000, and half the teams not producing any journal publications. Team motivators demonstrated a stronger association with research activity compared to barriers, with the motivator "enhancing team credibility" being significantly associated with funding received. No significant association between self-reported research

Description of the local dose rate measuring system for the Angra 2 nuclear power plant

International Nuclear Information System (INIS)

Costa, Lilian Rose Sobral da; Souza Mendes, Jorge Eduardo de

1995-01-01

The equipment used and the measured value processing involved in the Local Dose Rate Measuring System is described including the installation points for the measuring equipment in the reactor building, the auxiliary building and at the main gate of Angra 2 Nuclear Power Plant. Under normal operating conditions protecting of the personnel is ensured by measuring the local dose rate at those points which are generally accessible. In some cases , fixed sensors are not suitable so that mobile equipment is used. (author). 2 refs., 1 fig

Markets framed by culture : The role of local contexts in the rise of contemporary art commerce in Russia and India

NARCIS (Netherlands)

Komarova, N.

2018-01-01

How can we explain the diversity of ways in which local contexts affect the development of new markets? This dissertation takes the proliferation of contemporary art commerce across the globe that started in the late 1980s as an opportunity to answer this question by undertaking the study of art

Measuring capital market efficiency: Global and local correlations structure

Czech Academy of Sciences Publication Activity Database

Krištoufek, Ladislav; Vošvrda, Miloslav

2013-01-01

Roč. 392, č. 1 (2013), s. 184-193 ISSN 0378-4371 R&D Projects: GA ČR(CZ) GBP402/12/G097 Institutional support: RVO:67985556 Keywords : Capital market efficiency * Fractal dimension * Long-range dependence * Short-range dependence Subject RIV: AH - Economics Impact factor: 1.722, year: 2013 http://library.utia.cas.cz/separaty/2012/E/kristoufek-measuring capital market efficiency global and local correlations structure.pdf

Damage diagnostic of localized impact erosion by measuring acoustic vibration

International Nuclear Information System (INIS)

Futakawa, Masatoshi; Kogawa, Hiroyuki; Ikeda, Yujiro

2004-01-01

High power spallation targets for neutron sources are being developed in the world. Mercury target will be installed at the material and life science facility in J-PARC, which will promote innovative science. The mercury target is subject to the pressure wave caused by the proton bombarding mercury. The pressure wave propagation induces the cavitation in mercury that imposes localized impact erosion damage on the target vessel. The impact erosion is a critical issue to decide the lifetime of the target. The electric Magnetic IMpact Testing Machine, MIMTM, was developed to produce the localized impact erosion damage and evaluate the damage formation. Acoustic vibration measurement was carried out to investigate the correlation between the erosion damage and the damage potential derived from acoustic vibration. It was confirmed that the damage potential related with acoustic vibration is useful to predict the damage due to the localized impact erosion and to diagnose the structural integrity. (author)

Local hemostatic measures in anticoagulated patients undergoing oral surgery: a systematized literature review

Directory of Open Access Journals (Sweden)

Fábio Wildson Gurgel Costa

2013-01-01

Full Text Available PURPOSE: To conduct a systematized review of the literature about the main local hemostatic measures to control postoperative bleeding in anticoagulated patients. METHODS: A systematized review of literature was performed in the electronic database Medline (PubMed without restriction of the publication date. The eligibility criteria were studies involving maintenance of the anticoagulant therapy, prospective studies, retrospective studies, randomized clinical trials, controlled clinical studies, comparative studies, multicentric studies or case-control studies. Studies discontinuing anticoagulant therapy, case reports, literature reviews, in vitro studies, animal experiments and articles written in language not compatible with the search strategy adopted in this work were excluded. RESULTS: Twenty-four articles that met the adopted eligibility criteria were selected, enrolling 3891 subjects under anticoagulant therapy. A total of 171 cases of hemorrhage was observed. Tranexamic acid was the main local hemostatic measure used to controlling of postoperative bleeding. CONCLUSION: The local hemostatic measures proved to be effective according to previously published studies. Nevertheless, further clinical studies should be conducted to confirm this effectiveness.

Measuring Filament Orientation: A New Quantitative, Local Approach

Energy Technology Data Exchange (ETDEWEB)

Green, C.-E.; Cunningham, M. R.; Jones, P. A. [School of Physics, University of New South Wales, Sydney, NSW, 2052 (Australia); Dawson, J. R. [CSIRO Astronomy and Space Science, Australia Telescope National Facility, P.O. Box 76, Epping, NSW 1710 (Australia); Novak, G. [Center for Interdisciplinary Exploration and Research in Astrophysics (CIERA) and Department of Physics and Astronomy, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States); Fissel, L. M. [National Radio Astronomy Observatory (NRAO), 520 Edgemont Road, Charlottesville, VA, 22903 (United States)

2017-09-01

The relative orientation between filamentary structures in molecular clouds and the ambient magnetic field provides insight into filament formation and stability. To calculate the relative orientation, a measurement of filament orientation is first required. We propose a new method to calculate the orientation of the one-pixel-wide filament skeleton that is output by filament identification algorithms such as filfinder. We derive the local filament orientation from the direction of the intensity gradient in the skeleton image using the Sobel filter and a few simple post-processing steps. We call this the “Sobel-gradient method.” The resulting filament orientation map can be compared quantitatively on a local scale with the magnetic field orientation map to then find the relative orientation of the filament with respect to the magnetic field at each point along the filament. It can also be used for constructing radial profiles for filament width fitting. The proposed method facilitates automation in analyses of filament skeletons, which is imperative in this era of “big data.”.

Measuring Filament Orientation: A New Quantitative, Local Approach

Science.gov (United States)

Green, C.-E.; Dawson, J. R.; Cunningham, M. R.; Jones, P. A.; Novak, G.; Fissel, L. M.

2017-09-01

The relative orientation between filamentary structures in molecular clouds and the ambient magnetic field provides insight into filament formation and stability. To calculate the relative orientation, a measurement of filament orientation is first required. We propose a new method to calculate the orientation of the one-pixel-wide filament skeleton that is output by filament identification algorithms such as filfinder. We derive the local filament orientation from the direction of the intensity gradient in the skeleton image using the Sobel filter and a few simple post-processing steps. We call this the “Sobel-gradient method.” The resulting filament orientation map can be compared quantitatively on a local scale with the magnetic field orientation map to then find the relative orientation of the filament with respect to the magnetic field at each point along the filament. It can also be used for constructing radial profiles for filament width fitting. The proposed method facilitates automation in analyses of filament skeletons, which is imperative in this era of “big data.”

Measuring Filament Orientation: A New Quantitative, Local Approach

International Nuclear Information System (INIS)

Green, C.-E.; Cunningham, M. R.; Jones, P. A.; Dawson, J. R.; Novak, G.; Fissel, L. M.

2017-01-01

The relative orientation between filamentary structures in molecular clouds and the ambient magnetic field provides insight into filament formation and stability. To calculate the relative orientation, a measurement of filament orientation is first required. We propose a new method to calculate the orientation of the one-pixel-wide filament skeleton that is output by filament identification algorithms such as filfinder. We derive the local filament orientation from the direction of the intensity gradient in the skeleton image using the Sobel filter and a few simple post-processing steps. We call this the “Sobel-gradient method.” The resulting filament orientation map can be compared quantitatively on a local scale with the magnetic field orientation map to then find the relative orientation of the filament with respect to the magnetic field at each point along the filament. It can also be used for constructing radial profiles for filament width fitting. The proposed method facilitates automation in analyses of filament skeletons, which is imperative in this era of “big data.”

Evaluation of local site effect from microtremor measurements in Babol City, Iran

Science.gov (United States)

Rezaei, Sadegh; Choobbasti, Asskar Janalizadeh

2018-03-01

Every year, numerous casualties and a large deal of financial losses are incurred due to earthquake events. The losses incurred by an earthquake vary depending on local site effect. Therefore, in order to conquer drastic effects of an earthquake, one should evaluate urban districts in terms of the local site effect. One of the methods for evaluating the local site effect is microtremor measurement and analysis. Aiming at evaluation of local site effect across the city of Babol, the study area was gridded and microtremor measurements were performed with an appropriate distribution. The acquired data was analyzed through the horizontal-to-vertical noise ratio (HVNR) method, and fundamental frequency and associated amplitude of the H/V peak were obtained. The results indicate that fundamental frequency of the study area is generally lower than 1.25 Hz, which is acceptably in agreement with the findings of previous studies. Also, in order to constrain and validate the seismostratigraphic model obtained with this method, the results were compared with geotechnical, geological, and seismic data. Comparing the results of different methods, it was observed that the presented geophysical method can successfully determine the values of fundamental frequency across the study area as well as local site effect. Using the data obtained from the analysis of microtremor, a microzonation map of fundamental frequency across the city of Babol was prepared. This map has numerous applications in designing high-rise building and urban development plans.

Method for local temperature measurement in a nanoreactor for in situ high-resolution electron microscopy.

Science.gov (United States)

Vendelbo, S B; Kooyman, P J; Creemer, J F; Morana, B; Mele, L; Dona, P; Nelissen, B J; Helveg, S

2013-10-01

In situ high-resolution transmission electron microscopy (TEM) of solids under reactive gas conditions can be facilitated by microelectromechanical system devices called nanoreactors. These nanoreactors are windowed cells containing nanoliter volumes of gas at ambient pressures and elevated temperatures. However, due to the high spatial confinement of the reaction environment, traditional methods for measuring process parameters, such as the local temperature, are difficult to apply. To address this issue, we devise an electron energy loss spectroscopy (EELS) method that probes the local temperature of the reaction volume under inspection by the electron beam. The local gas density, as measured using quantitative EELS, is combined with the inherent relation between gas density and temperature, as described by the ideal gas law, to obtain the local temperature. Using this method we determined the temperature gradient in a nanoreactor in situ, while the average, global temperature was monitored by a traditional measurement of the electrical resistivity of the heater. The local gas temperatures had a maximum of 56 °C deviation from the global heater values under the applied conditions. The local temperatures, obtained with the proposed method, are in good agreement with predictions from an analytical model. Copyright © 2013 Elsevier B.V. All rights reserved.

The variance of the locally measured Hubble parameter explained with different estimators

DEFF Research Database (Denmark)

Odderskov, Io Sandberg Hess; Hannestad, Steen; Brandbyge, Jacob

2017-01-01

We study the expected variance of measurements of the Hubble constant, H0, as calculated in either linear perturbation theory or using non-linear velocity power spectra derived from N-body simulations. We compare the variance with that obtained by carrying out mock observations in the N......-body simulations, and show that the estimator typically used for the local Hubble constant in studies based on perturbation theory is different from the one used in studies based on N-body simulations. The latter gives larger weight to distant sources, which explains why studies based on N-body simulations tend...... to obtain a smaller variance than that found from studies based on the power spectrum. Although both approaches result in a variance too small to explain the discrepancy between the value of H0 from CMB measurements and the value measured in the local universe, these considerations are important in light...

Building confidence: an exploration of nurses undertaking a postgraduate biological science course.

Science.gov (United States)

Van Wissen, Kim; McBride-Henry, Karen

2010-01-01

This study aimed to explore the impact of studying biological science at a postgraduate level and how this impacted on nursing practice. The term biological sciences in this research encompasses elements of physiology, genetics, biochemistry and pathophysiology. A qualitative research study was designed, that involved the dissemination of a pre- and post-course semi-structured questionnaire for a biological science course, as part of a Master of Nursing programme at a New Zealand University, thus exploring the impact of undertaking a postgraduate biological sciences course. The responses were analysed into themes, based on interpretive concepts. The primary themes revealed improvement in confidence as: confidence in communication, confidence in linking nursing theoretical knowledge to practice and confidence in clinical nursing knowledge. This study highlights the need to privilege clinically-derived nursing knowledge, and that confidence in this nursing knowledge and clinical practice can be instilled through employing the model of theory-guided practice.

Relative localization in wireless sensor networks for measurement of electric fields under HVDC transmission lines.

Science.gov (United States)

Cui, Yong; Wang, Qiusheng; Yuan, Haiwen; Song, Xiao; Hu, Xuemin; Zhao, Luxing

2015-02-04

In the wireless sensor networks (WSNs) for electric field measurement system under the High-Voltage Direct Current (HVDC) transmission lines, it is necessary to obtain the electric field distribution with multiple sensors. The location information of each sensor is essential to the correct analysis of measurement results. Compared with the existing approach which gathers the location information by manually labelling sensors during deployment, the automatic localization can reduce the workload and improve the measurement efficiency. A novel and practical range-free localization algorithm for the localization of one-dimensional linear topology wireless networks in the electric field measurement system is presented. The algorithm utilizes unknown nodes' neighbor lists based on the Received Signal Strength Indicator (RSSI) values to determine the relative locations of nodes. The algorithm is able to handle the exceptional situation of the output permutation which can effectively improve the accuracy of localization. The performance of this algorithm under real circumstances has been evaluated through several experiments with different numbers of nodes and different node deployments in the China State Grid HVDC test base. Results show that the proposed algorithm achieves an accuracy of over 96% under different conditions.

Relative Localization in Wireless Sensor Networks for Measurement of Electric Fields under HVDC Transmission Lines

Directory of Open Access Journals (Sweden)

Yong Cui

2015-02-01

Full Text Available In the wireless sensor networks (WSNs for electric field measurement system under the High-Voltage Direct Current (HVDC transmission lines, it is necessary to obtain the electric field distribution with multiple sensors. The location information of each sensor is essential to the correct analysis of measurement results. Compared with the existing approach which gathers the location information by manually labelling sensors during deployment, the automatic localization can reduce the workload and improve the measurement efficiency. A novel and practical range-free localization algorithm for the localization of one-dimensional linear topology wireless networks in the electric field measurement system is presented. The algorithm utilizes unknown nodes’ neighbor lists based on the Received Signal Strength Indicator (RSSI values to determine the relative locations of nodes. The algorithm is able to handle the exceptional situation of the output permutation which can effectively improve the accuracy of localization. The performance of this algorithm under real circumstances has been evaluated through several experiments with different numbers of nodes and different node deployments in the China State Grid HVDC test base. Results show that the proposed algorithm achieves an accuracy of over 96% under different conditions.

Detecting measurement-induced relative-position localization

International Nuclear Information System (INIS)

Knott, P A; Sindt, J; Dunningham, J A

2013-01-01

The theory of decoherence explains how classicality emerges from an underlying quantum reality. An additional interpretation to this has been proposed in which scattering events induce the localization of relative observables (Rau et al 2003 Science 301 1081). An interesting consequence of this process is that it involves the build-up of certain robust entanglements between the observables being localized. To date the weakness of this interpretation has been the lack of a clear experimental signature that allows it to be tested. Here we provide a simple experimentally accessible scheme that enables just that. We also discuss a Bayesian technique that could, in principle, allow experiments to confirm the localization to any desired degree of accuracy and we present precision requirements that are achievable with current experiments. Finally, we extend the scheme from its initial one dimensional proof of principle to the more real world scenario of three dimensional localization. (paper)

Experimental investigation on local parameter measurement using optical probes in two-phase flow under rolling condition

International Nuclear Information System (INIS)

Tian Daogui; Sun Licheng; Yan Changqi; Liu Guoqiang

2013-01-01

In order to get more local interfacial information as well as to further comprehend the intrinsic mechanism of two-phase flow under rolling condition, a method was proposed to measure the local parameters by using optical probes under rolling condition in this paper. An experimental investigation of two-phase flow under rolling condition was conducted using the probe fabricated by the authors. It is verified that the probe method is feasible to measure the local parameters in two'-phase flow under rolling condition. The results show that the interfacial parameters distribution near wall region has a distinct periodicity due to the rolling motion. The averaged deviation of the void fraction measured by the probe from that obtained from measured pressure drop is about 8%. (authors)

Spatially resolved measurements of the magnetocaloric effect and the local magnetic field using thermography

DEFF Research Database (Denmark)

Christensen, Dennis; Bjørk, Rasmus; Nielsen, Kaspar Kirstein

2010-01-01

The magnetocaloric effect causes a magnetic material to change temperature upon application of a magnetic field. Here, spatially resolved measurements of the adiabatic temperature change are performed on a plate of gadolinium using thermography. The adiabatic temperature change is used to extract...... the corresponding change in the local magnetic field strength. The measured temperature change and local magnetic field strength are compared to results obtained with a numerical model, which takes demagnetization into account and employs experimental data....

Sensitivity of resistive and Hall measurements to local inhomogeneities

DEFF Research Database (Denmark)

Koon, Daniel W.; Wang, Fei; Petersen, Dirch Hjorth

2013-01-01

We derive exact, analytic expressions for the sensitivity of resistive and Hall measurements to local inhomogeneities in a specimen's material properties in the combined linear limit of a weak perturbation over an infinitesimal area in a small magnetic field. We apply these expressions both to four-point...... probe measurements on an infinite plane and to symmetric, circular van der Pauw discs, obtaining functions consistent with published results. These new expressions speed up calculation of the sensitivity for a specimen of arbitrary shape to little more than the solution of two Laplace equation boundary......-value problems of the order of N3 calculations, rather than N2 problems of total order N5, and in a few cases produces an analytic expression for the sensitivity. These functions provide an intuitive, visual explanation of how, for example, measurements can predict the wrong carrier type in n-type ZnO....

Measurement of the local void fraction at high pressures in a heating channel

International Nuclear Information System (INIS)

Martin, R.

1969-01-01

Void fraction measurements were made in two phase flow boiling systems at high pressures in a uniformly heated, rectangular channel with a high aspect ratio. The local void fraction values were calculated from measurements of the absorption of a thin collimated X-ray beam (2 mm x 0.05 mm). The mean void fraction in a horizontal section results from integration of the local values across the section. At a fixed measuring station the quality and- void fraction were varied by changing the heat flux, flow rate and pressure systematically. Two channels were used differing in length and thickness (150.8 cm x 5.3 cm x 0.2 cm and the significant features of this study are: -1) The void fraction measurements are among the first obtained at such high pressure (80 to 140 kg/cm 2 ); -2) In the experimental region under consideration the measurements are systematic and numerous enough to allow accurate interpolations: mass velocity from 50 to 220 g/cm 2 .s, heat flux from 40 to 170 W/cm 2 and calculated steam quality from -0.2 to 0.2; -3) Many tests were performed under local boiling conditions with the mean temperature of the fluid below the saturation temperature; and -4) These results were compared to the predictions of certain models presented in the literature and simple empirical formulae were developed to fit the experimental results. (author) [fr

A possibility of local measurements of ion temperature in a high-temperature plasma by laser induced ionization

International Nuclear Information System (INIS)

Kantor, M

2012-01-01

A new diagnostic for local measurements of ion temperature and drift velocity in fusion plasmas is proposed in the paper. The diagnostic is based on laser induced ionization of excited hydrogen and deuterium atoms from the levels which ionization energy less than the laser photon energy. A high intensive laser beam ionizes nearly all the excited atoms in the beam region resulting in a quench of spontaneous line emission of the appropriate optical transitions. The measurements of the quenching emission have been used in the past for local measurements of hydrogen atom density in tokamak plasma. The idea of the new diagnostic is spectral resolution of the quenching emission. The measured spectrum relates directly to the velocity distribution of the excited atoms. This distribution is strongly coupled to the distribution of the hydrogen atoms at the ground state. So, the spectral resolution of quenching emission is a way of local measurements of the temperature and drift velocity of hydrogen atoms in plasma. The temperature of hydrogen atoms is well coupled to the local ion temperature as long as the mean free path of the atoms is shorter than the ion gradient length in plasma. In this case the new diagnostic can provide local measurements of ion temperature in plasma. The paper considers technical capabilities of the diagnostic, physical restrictions of its application and interpretation of the measurements.

Evaluation of fire safety measures at local universities in Kenya with ...

African Journals Online (AJOL)

This study establishes fire safety measures in place in local universities in Kenya, and ... fire suppression systems, fire detection and alarm systems and fire Hydrants. ... response backed by university management endorsement and support. The Directorate of occupational safety and health services should also make the ...

Numerical and experimental study on vorticity measurement in liquid metal using local Lorentz force velocimetry

Science.gov (United States)

Hernández, Daniel; Marangoni, Rafael; Schleichert, Jan; Karcher, Christian; Fröhlich, Thomas; Wondrak, Thomas

2018-03-01

Local Lorentz force velocimetry (local LFV) is a contactless velocity measurement technique for liquid metals. Due to the relative movement between an electrically conductive fluid and a static applied magnetic field, eddy currents and a flow-braking Lorentz force are generated inside the metal melt. This force is proportional to the flow rate or to the local velocity, depending on the volume subset of the flow spanned by the magnetic field. By using small-size magnets, a localized magnetic field distribution is achieved allowing a local velocity assessment in the region adjacent to the wall. In the present study, we describe a numerical model of our experiments at a continuous caster model where the working fluid is GaInSn in eutectic composition. Our main goal is to demonstrate that this electromagnetic technique can be applied to measure vorticity distributions, i.e. to resolve velocity gradients as well. Our results show that by using a cross-shaped magnet system, the magnitude of the torque perpendicular to the surface of the mold significantly increases improving its measurement in a liquid metal flow. According to our numerical model, this torque correlates with the vorticity of the velocity in this direction. Before validating our numerical predictions, an electromagnetic dry calibration of the measurement system composed of a multicomponent force and torque sensor and a cross-shaped magnet was done using a rotating disk made of aluminum. The sensor is able to measure simultaneously all three components of force and torque, respectively. This calibration step cannot be avoided and it is used for an accurate definition of the center of the magnet with respect to the sensor’s coordinate system for torque measurements. Finally, we present the results of the experiments at the mini-LIMMCAST facility showing a good agreement with the numerical model.

Quantitative analysis of residual protein contamination of podiatry instruments reprocessed through local and central decontamination units

Directory of Open Access Journals (Sweden)

Ramage Gordon

2011-01-01

Full Text Available Abstract Background The cleaning stage of the instrument decontamination process has come under increased scrutiny due to the increasing complexity of surgical instruments and the adverse affects of residual protein contamination on surgical instruments. Instruments used in the podiatry field have a complex surface topography and are exposed to a wide range of biological contamination. Currently, podiatry instruments are reprocessed locally within surgeries while national strategies are favouring a move toward reprocessing in central facilities. The aim of this study was to determine the efficacy of local and central reprocessing on podiatry instruments by measuring residual protein contamination of instruments reprocessed by both methods. Methods The residual protein of 189 instruments reprocessed centrally and 189 instruments reprocessed locally was determined using a fluorescent assay based on the reaction of proteins with o-phthaldialdehyde/sodium 2-mercaptoethanesulfonate. Results Residual protein was detected on 72% (n = 136 of instruments reprocessed centrally and 90% (n = 170 of instruments reprocessed locally. Significantly less protein (p Conclusions Overall, the results show the superiority of central reprocessing for complex podiatry instruments when protein contamination is considered, though no significant difference was found in residual protein between local decontamination unit and central decontamination unit processes for Blacks files. Further research is needed to undertake qualitative identification of protein contamination to identify any cross contamination risks and a standard for acceptable residual protein contamination applicable to different instruments and specialities should be considered as a matter of urgency.

Decree No. 67/77 of 6 May establishing a National Uranium Undertaking as a public body

International Nuclear Information System (INIS)

1977-01-01

This Decree, promulgated on 29 March 1977, sets up a National Uranium Undertaking (ENU). The ENU Statute which is attached to the Decree lays down that its main purpose is to prospect for and inventory uranium deposits, to explore known deposits, to set up facilities for recovery and treatment of uranium ores, and finally, to market the products obtained. The ENU has taken over the work which, until now, had been carried out in that field by the Junta de Energia Nuclear and it is placed under the authority of the Minister of Industry and Technology. (NEA) [fr

On line local measurement of thermal neutron flux on BNCT patient using SPND

International Nuclear Information System (INIS)

Miller, M.E.; Sztejnberg Goncalves-Carralves, M.L.; Gonzalez, S.J.

2006-01-01

The first on-line neutron flux measurement on a patient using a self-powered neutron detector (SPND) was assessed during the fourth clinical trial of the Boron Neutron Capture Therapy (BNCT) Project carried out at the National Atomic Energy Commission of Argentina (CNEA) and the medical center Angel H. Roffo. The SPND was specially developed and assembled for BNCT by CNEA. Its small size, 1 cm sensible length and 1.9 mm diameter, allowed performing a localized measurement. Since the treated tumors were cutaneous melanomas of nodular type, the SPND was located on the patient's skin. The patient was exposed to three different and consecutive fields and in each of them the SPND was used to measure local thermal neutron fluxes at selected dosimetric reference points. The values of the measured fluxes agreed with the ones estimated by calculation. This trial also demonstrated the usefulness of the SPND for assessing flux on-line. (author)

Role of community based local institution for climate change adaptation in the Teesta riverine area of Bangladesh

Directory of Open Access Journals (Sweden)

Md. Rezaul Karim

2017-01-01

Full Text Available Climate change adaptation is one of the most crucial issues in developing countries like Bangladesh. The main objective was to understand the linkage of participation with Community Based Adaptation (CBA to climate change. Institutional framework following different types of conceptual theories (collective action, group, game and social learning theory was utilized to analyze the participatory process in local community level Village Disaster Mangement Committee (VDMC that works in collaboration with local government. Field level data was collected through interview and group discussion during 25 April to 30 May 2015 in the Teesta riverine area of northern Bangladesh. Results showed that flood and drought were the major climate change impacts in the study area, and various participatory tools were used for risk assessment and undertaking action plans to overcome the climate change challenges by the group VDMC. Participation in VDMC generated both relational and technical outcomes. The relational outcomes are the informal institutional changes through which local community adopt technological adaptation measures. Although, limitations like bargaining problem, free riding or conflict were found in collective decision making, but the initiation of local governance like VDMC has brought various institutional change in the communities in terms of adaptation practices. More than 80% VDMC and around 40–55% non-VDMC household respondents agreed that overall community based adaptation process was successful in the previous year. They believed that some innovative practices had been brought in the community through VDMC action for climate change adaptation. No doubt that the CBA has achieved good progress to achieve the government Comprehensive Disaster Management (CDM strategy of climate change adaptation. But, there is still lack of coordination among local government, NGOs and civil partners in working together. Research related to socio

Chorus source region localization in the Earth's outer magnetosphere using THEMIS measurements

Directory of Open Access Journals (Sweden)

O. Agapitov

2010-06-01

Full Text Available Discrete ELF/VLF chorus emissions, the most intense electromagnetic plasma waves observed in the Earth's radiation belts and outer magnetosphere, are thought to propagate roughly along magnetic field lines from a localized source region near the magnetic equator towards the magnetic poles. THEMIS project Electric Field Instrument (EFI and Search Coil Magnetometer (SCM measurements were used to determine the spatial scale of the chorus source localization region on the day side of the Earth's outer magnetosphere. We present simultaneous observations of the same chorus elements registered onboard several THEMIS spacecraft in 2007 when all the spacecraft were in the same orbit. Discrete chorus elements were observed at 0.15–0.25 of the local electron gyrofrequency, which is typical for the outer magnetosphere. We evaluated the Poynting flux and wave vector distribution and obtained chorus wave packet quasi-parallel propagation to the local magnetic field. Amplitude and phase correlation data analysis allowed us to estimate the characteristic spatial correlation scale transverse to the local magnetic field to be in the 2800–3200 km range.

Measurement of digital blood pressure after local cooling

DEFF Research Database (Denmark)

Nielsen, S L; Lassen, N A

1977-01-01

A double-inlet plastic cuff was designed for local cooling and systolic blood pressure measurement on the middle phalanx of the fingers. With a tourniquet on the proximal phalanx of one finger, cooling for 5 min made the digital artery temperature equal the skin temperature. The difference between...... the systolic pressure in a control finger and in the cooled finger give the reopening pressure in the digital arteries. At 30, 25, 20, 15, and 10 degrees C, respectively the percent decrease of the finger pressure was 0.2 (0.2), 1.5 (2.5), 8.5 (3.7), 11.4 (3.4), and 15.3 (3.1) in normal young women...

A measurement of the local ion temperature gradient in the PLT tokamak

International Nuclear Information System (INIS)

Lovberg, J.A.; Strachan, J.D.; Princeton Univ., NJ

1989-12-01

Local ion temperature gradients were measured at two radial positions in the PLT tokamak by counting escaping d(d,p)t protons on orbits at closely spaced intervals. A single surface barrier detector was used to make each gradient measurement, eliminating relative calibration uncertainties. The ion thermal diffusivities inferred through ion energy balance with the measured temperature gradients are within a factor of two of Chang-Hinton neoclassical values for the 3 He-minority ICRH plasmas. 12 refs., 8 figs

Revisiting local TOC measures in an internal supply chain: a note

DEFF Research Database (Denmark)

Gupta, M.; Andersen, S.

2012-01-01

While the global theory of constraints (TOC)-based measures of throughput, inventory and operating expense are well known, the literature on local measures of throughput dollar-days and inventory dollar-days (TDDs/IDDs) is sparse and inconclusive. This paper shows how adherence to these measures...... naturally puts a non-TOC company on a continuous improvement path by assisting in identification of the constraint and implementation of a drum-buffer-rope (DBR)-like system. Thus, by simulating a small company, this note highlights the relationship between TDD/IDD measures and a DBR system, which further...... promotes TOC principles. Ultimately, we provide future research avenues into the role these measures can play in the development of a holistic incentive system and the implementation of a DBR-like system across the supply chain network....

Three-dimensional measurement of the local extinction coefficient in a dense spray

International Nuclear Information System (INIS)

Wellander, Rikard; Berrocal, Edouard; Kristensson, Elias; Richter, Mattias; Aldén, Marcus

2011-01-01

Laser extinction, signal attenuation and multiple scattering are the three main phenomena limiting qualitative and quantitative measurements in planar laser imaging of sprays. In this paper, a method is presented where structured laser illumination planar imaging is used to remove the signal contribution from multiply scattered light. Based on this technique, data from side scattering and transmission measurements are obtained simultaneously. An algorithm, compensating for signal attenuation and laser extinction, is further applied to calculate the local extinction coefficient. The method is first demonstrated on a cuvette containing a homogeneous solution of scattering particles with an extinction coefficient μ-bar e = 0.13 mm −1 . Finally the procedure is applied on an air-assisted water spray with a maximum optical depth of OD ∼ 3, where the position-dependent extinction coefficient is extracted within the probed volume. To the best of our knowledge, this paper demonstrates for the first time a method to measure the local μ-bar e within the three dimensions of an inhomogeneous scattering medium using laser sheet illumination, after suppression of the multiple light scattering intensity

The effect of interacting dark energy on local measurements of the Hubble constant

International Nuclear Information System (INIS)

Odderskov, Io; Baldi, Marco; Amendola, Luca

2016-01-01

In the current state of cosmology, where cosmological parameters are being measured to percent accuracy, it is essential to understand all sources of error to high precision. In this paper we present the results of a study of the local variations in the Hubble constant measured at the distance scale of the Coma Cluster, and test the validity of correcting for the peculiar velocities predicted by gravitational instability theory. The study is based on N-body simulations, and includes models featuring a coupling between dark energy and dark matter, as well as two ΛCDM simulations with different values of σ 8 . It is found that the variance in the local flows is significantly larger in the coupled models, which increases the uncertainty in the local measurements of the Hubble constant in these scenarios. By comparing the results from the different simulations, it is found that most of the effect is caused by the higher value of σ 8 in the coupled cosmologies, though this cannot account for all of the additional variance. Given the discrepancy between different estimates of the Hubble constant in the universe today, cosmological models causing a greater cosmic variance is something that we should be aware of.

The effect of interacting dark energy on local measurements of the Hubble constant

Energy Technology Data Exchange (ETDEWEB)

Odderskov, Io [Department of Physics and Astronomy, University of Aarhus, Ny Munkegade 120, Aarhus C (Denmark); Baldi, Marco [Dipartimento di Fisica e Astronomia, Alma Mater Studiorum Università di Bologna, viale Berti Pichat 6/2, I-40127, Bologna (Italy); Amendola, Luca, E-mail: isho07@phys.au.dk, E-mail: marco.baldi5@unibo.it, E-mail: l.amendola@thphys.uni-heidelberg.de [Institut für Theoretische Physik, Ruprecht-Karls-Universität Heidelberg, Philosophenweg 16, 69120 Heidelberg (Germany)

2016-05-01

In the current state of cosmology, where cosmological parameters are being measured to percent accuracy, it is essential to understand all sources of error to high precision. In this paper we present the results of a study of the local variations in the Hubble constant measured at the distance scale of the Coma Cluster, and test the validity of correcting for the peculiar velocities predicted by gravitational instability theory. The study is based on N-body simulations, and includes models featuring a coupling between dark energy and dark matter, as well as two ΛCDM simulations with different values of σ{sub 8}. It is found that the variance in the local flows is significantly larger in the coupled models, which increases the uncertainty in the local measurements of the Hubble constant in these scenarios. By comparing the results from the different simulations, it is found that most of the effect is caused by the higher value of σ{sub 8} in the coupled cosmologies, though this cannot account for all of the additional variance. Given the discrepancy between different estimates of the Hubble constant in the universe today, cosmological models causing a greater cosmic variance is something that we should be aware of.

Underground localization using dual magnetic field sequence measurement and pose graph SLAM for directional drilling

International Nuclear Information System (INIS)

Park, Byeolteo; Myung, Hyun

2014-01-01

With the development of unconventional gas, the technology of directional drilling has become more advanced. Underground localization is the key technique of directional drilling for real-time path following and system control. However, there are problems such as vibration, disconnection with external infrastructure, and magnetic field distortion. Conventional methods cannot solve these problems in real time or in various environments. In this paper, a novel underground localization algorithm using a re-measurement of the sequence of the magnetic field and pose graph SLAM (simultaneous localization and mapping) is introduced. The proposed algorithm exploits the property of the drilling system that the body passes through the previous pass. By comparing the recorded measurement from one magnetic sensor and the current re-measurement from another magnetic sensor, the proposed algorithm predicts the pose of the drilling system. The performance of the algorithm is validated through simulations and experiments. (paper)

Underground localization using dual magnetic field sequence measurement and pose graph SLAM for directional drilling

Science.gov (United States)

Park, Byeolteo; Myung, Hyun

2014-12-01

With the development of unconventional gas, the technology of directional drilling has become more advanced. Underground localization is the key technique of directional drilling for real-time path following and system control. However, there are problems such as vibration, disconnection with external infrastructure, and magnetic field distortion. Conventional methods cannot solve these problems in real time or in various environments. In this paper, a novel underground localization algorithm using a re-measurement of the sequence of the magnetic field and pose graph SLAM (simultaneous localization and mapping) is introduced. The proposed algorithm exploits the property of the drilling system that the body passes through the previous pass. By comparing the recorded measurement from one magnetic sensor and the current re-measurement from another magnetic sensor, the proposed algorithm predicts the pose of the drilling system. The performance of the algorithm is validated through simulations and experiments.

MEASURING LOCAL GRADIENT AND SKEW QUADRUPOLE ERRORS IN RHIC IRS

International Nuclear Information System (INIS)

CARDONA, J.; PEGGS, S.; PILAT, R.; PTITSYN, V.

2004-01-01

The measurement of local linear errors at RHIC interaction regions using an ''action and phase'' analysis of difference orbits has already been presented [2]. This paper evaluates the accuracy of this technique using difference orbits that were taken when known gradient errors and skew quadrupole errors were intentionally introduced. It also presents action and phase analysis of simulated orbits when controlled errors are intentionally placed in a RHIC simulation model

Verification of pharmacogenetics-based warfarin dosing algorithms in Han-Chinese patients undertaking mechanic heart valve replacement.

Science.gov (United States)

Zhao, Li; Chen, Chunxia; Li, Bei; Dong, Li; Guo, Yingqiang; Xiao, Xijun; Zhang, Eryong; Qin, Li

2014-01-01

To study the performance of pharmacogenetics-based warfarin dosing algorithms in the initial and the stable warfarin treatment phases in a cohort of Han-Chinese patients undertaking mechanic heart valve replacement. We searched PubMed, Chinese National Knowledge Infrastructure and Wanfang databases for selecting pharmacogenetics-based warfarin dosing models. Patients with mechanic heart valve replacement were consecutively recruited between March 2012 and July 2012. The predicted warfarin dose of each patient was calculated and compared with the observed initial and stable warfarin doses. The percentage of patients whose predicted dose fell within 20% of their actual therapeutic dose (percentage within 20%), and the mean absolute error (MAE) were utilized to evaluate the predictive accuracy of all the selected algorithms. A total of 8 algorithms including Du, Huang, Miao, Wei, Zhang, Lou, Gage, and International Warfarin Pharmacogenetics Consortium (IWPC) model, were tested in 181 patients. The MAE of the Gage, IWPC and 6 Han-Chinese pharmacogenetics-based warfarin dosing algorithms was less than 0.6 mg/day in accuracy and the percentage within 20% exceeded 45% in all of the selected models in both the initial and the stable treatment stages. When patients were stratified according to the warfarin dose range, all of the equations demonstrated better performance in the ideal-dose range (1.88-4.38 mg/day) than the low-dose range (pharmacogenetics-based warfarin dosing regimens performed similarly in our cohort. However, the algorithms of Wei, Huang, and Miao showed a better potential for warfarin prediction in the initial and the stable treatment phases in Han-Chinese patients undertaking mechanic heart valve replacement.

CHROMATE INHIBITION OF THE LOCALIZED CORROSION OF ALUMINUM: MEASUREMENTS OF ELECTROCHEMICAL TRANSIENTS

International Nuclear Information System (INIS)

SASAKI, K.; ISAACS, H.S.

2001-01-01

We investigated the inhibition by chromate ions of the localized corrosion of aluminum by electrochemical transient measurements. In agreement with other work, the measurements demonstrated that chromate is a cathodic inhibitor for aluminum in open circuit. The reduction of hexavalent chromium to trivalent chromium is assumed to take place on catalyzed sites of the surface. The resulting products inhibit oxygen reduction reactions at these sites, thereby retarding pitting corrosion

Development of concentration measurement system in a mini-channel using a local NMR sensor

International Nuclear Information System (INIS)

Ogawa, Kuniyasu; Haishi, Tomoyuki

2008-01-01

A local NMR sensor to measure methanol concentration of fluid flowing in a mini-channel was developed. The principle of the methanol sensor is based on the chemical shift of CH and OH species under high magnetic field. The sensor consists of a planar surface coil of 0.60 mm inside diameter. Using the sensors, local methanol concentration of water-methanol mixture in the mini-channel of 3.0 mm width and 1.5 mm depth was measured. The effects of flow velocity in the channel and the gravity direction on the methanol concentration distribution in the channel were investigated experimentally. (author)

Measuring Earth's Local Magnetic Field Using a Helmholtz Coil

Science.gov (United States)

Williams, Jonathan E.

2014-01-01

In this paper, I present a low-cost interactive experiment for measuring the strength of Earth's local magnetic field. This activity can be done in most high schools or two-year physics laboratories with limited resources, yet will have a tremendous learning impact. This experiment solidifies the three-dimensional nature of Earth's…

Synchrotron measurements of local microstructure and residual strains in ductile cast iron

DEFF Research Database (Denmark)

Zhang, Yubin; Andriollo, Tito; Fæster, Søren

2017-01-01

The local microstructure and distribution of thermally induced residual strains in ferrite matrix grains around an individual spherical graphite nodule in ductile cast iron (DCI) were measured using a synchrotron X-ray micro-diffraction technique. It is found that the matrix grains are deformed...

Developing a scale to measure "attachment to the local community" in late middle aged individuals.

Science.gov (United States)

Sakai, Taichi; Omori, Junko; Takahashi, Kazuko; Mitsumori, Yasuko; Kobayashi, Maasa; Ono, Wakanako; Miyazaki, Toshie; Anzai, Hitomi; Saito, Mika

2016-01-01

Objectives This study was conducted to develop a scale for measuring "attachment to the local community" for its use in health services. The scale is also intended to nurture new social relationships in late middle-aged individuals.Methods Thirty items were initially planned to be included in the scale to measure "attachment to the local community", according to a previous study that identified the concept. The study subjects were late middle-aged residents of City B in Prefecture A, located in Tokyo suburbs. From the basic resident register data, 1,000 individuals (local residents in the 50-69 year age group) were selected by a multi-stage random sampling technique, on the basis of their residential area, age, and sex (while maintaining the male to female ratio). An unsigned self-administered questionnaire was distributed to the subjects, and the responses were collected by postal mail. The collected data was analyzed using psychometric study of scale.Results Valid responses were obtained from 583 subjects, and the response rate was 58.3%. In an item analysis, none of the items were rejected. In a subsequent factor analysis, 7 items were eliminated. These items included 2 items with a factor loading of attachment to the local community" was 0.95, demonstrating internal consistency. We then examined the correlation with an existing scale to measure social support; the results revealed a statistically significant correlation and confirmed criterion-related validity (Pattachment to the local community."

Vapor-based interferometric measurement of local evaporation rate and interfacial temperature of evaporating droplets.

Science.gov (United States)

Dehaeck, Sam; Rednikov, Alexey; Colinet, Pierre

2014-03-04

The local evaporation rate and interfacial temperature are two quintessential characteristics for the study of evaporating droplets. Here, it is shown how one can extract these quantities by measuring the vapor concentration field around the droplet with digital holographic interferometry. As a concrete example, an evaporating freely receding pending droplet of 3M Novec HFE-7000 is analyzed at ambient conditions. The measured vapor cloud is shown to deviate significantly from a pure-diffusion regime calculation, but it compares favorably to a new boundary-layer theory accounting for a buoyancy-induced convection in the gas and the influence upon it of a thermal Marangoni flow. By integration of the measured local evaporation rate over the interface, the global evaporation rate is obtained and validated by a side-view measurement of the droplet shape. Advective effects are found to boost the global evaporation rate by a factor of 4 as compared to the diffusion-limited theory.

Verification of Pharmacogenetics-Based Warfarin Dosing Algorithms in Han-Chinese Patients Undertaking Mechanic Heart Valve Replacement

Science.gov (United States)

Zhao, Li; Chen, Chunxia; Li, Bei; Dong, Li; Guo, Yingqiang; Xiao, Xijun; Zhang, Eryong; Qin, Li

2014-01-01

Objective To study the performance of pharmacogenetics-based warfarin dosing algorithms in the initial and the stable warfarin treatment phases in a cohort of Han-Chinese patients undertaking mechanic heart valve replacement. Methods We searched PubMed, Chinese National Knowledge Infrastructure and Wanfang databases for selecting pharmacogenetics-based warfarin dosing models. Patients with mechanic heart valve replacement were consecutively recruited between March 2012 and July 2012. The predicted warfarin dose of each patient was calculated and compared with the observed initial and stable warfarin doses. The percentage of patients whose predicted dose fell within 20% of their actual therapeutic dose (percentage within 20%), and the mean absolute error (MAE) were utilized to evaluate the predictive accuracy of all the selected algorithms. Results A total of 8 algorithms including Du, Huang, Miao, Wei, Zhang, Lou, Gage, and International Warfarin Pharmacogenetics Consortium (IWPC) model, were tested in 181 patients. The MAE of the Gage, IWPC and 6 Han-Chinese pharmacogenetics-based warfarin dosing algorithms was less than 0.6 mg/day in accuracy and the percentage within 20% exceeded 45% in all of the selected models in both the initial and the stable treatment stages. When patients were stratified according to the warfarin dose range, all of the equations demonstrated better performance in the ideal-dose range (1.88–4.38 mg/day) than the low-dose range (warfarin dose prediction and in the low-dose and the ideal-dose ranges. Conclusions All of the selected pharmacogenetics-based warfarin dosing regimens performed similarly in our cohort. However, the algorithms of Wei, Huang, and Miao showed a better potential for warfarin prediction in the initial and the stable treatment phases in Han-Chinese patients undertaking mechanic heart valve replacement. PMID:24728385

Quantum eraser and the decoherence time of a local measurement process

International Nuclear Information System (INIS)

Abranyos, Y.; Jakob, M.; Bergou, J.

1998-01-01

We propose an implementation of the quantum eraser, based on a recent experimental scheme by Eichmann et al. involving two four-level atoms. In our version a continuous broad band excitation field drives the two trapped atoms and information about which atom scattered the light is stored in the internal degrees of freedom of the atoms. Entanglement of the two atoms after the detection of the photon is intimately connected to the availability of this 'which path' information. We also show that the quantum eraser can be used to measure the decoherence time of a local measurement process. (author)

Local Magnetic Measurements of Trapped Flux Through a Permanent Current Path in Graphite

Science.gov (United States)

Stiller, Markus; Esquinazi, Pablo D.; Quiquia, José Barzola; Precker, Christian E.

2018-04-01

Temperature- and field-dependent measurements of the electrical resistance of different natural graphite samples suggest the existence of superconductivity at room temperature in some regions of the samples. To verify whether dissipationless electrical currents are responsible for the trapped magnetic flux inferred from electrical resistance measurements, we localized them using magnetic force microscopy on a natural graphite sample in remanent state after applying a magnetic field. The obtained evidence indicates that at room temperature a permanent current flows at the border of the trapped flux region. The current path vanishes at the same transition temperature T_c≈ 370 K as the one obtained from electrical resistance measurements on the same sample. This sudden decrease in the phase is different from what is expected for a ferromagnetic material. Time-dependent measurements of the signal show the typical behavior of flux creep of a permanent current flowing in a superconductor. The overall results support the existence of room-temperature superconductivity at certain regions in the graphite structure and indicate that magnetic force microscopy is suitable to localize them. Magnetic coupling is excluded as origin of the observed phase signal.

Cochlear implant electrode localization in post-operative CT using a spherical measure

DEFF Research Database (Denmark)

Braithwaite, Benjamin Michael; Kjer, Hans Martin; Fagertun, Jens

2016-01-01

the ordering of electrode contacts on implanted electrode arrays from post-operative CT images. Our method applies a specialized filter chain to the images based on a threshold and spherical measure, and selects contact positions at local maxima in the filtered image. Two datasets of 13 temporal bone specimens...

Characterization of the spatial structure of local functional connectivity using multi-distance average correlation measures.

Science.gov (United States)

Macia, Didac; Pujol, Jesus; Blanco-Hinojo, Laura; Martínez-Vilavella, Gerard; Martín-Santos, Rocío; Deus, Joan

2018-04-24

There is ample evidence from basic research in neuroscience of the importance of local cortico-cortical networks. Millimetric resolution is achievable with current functional MRI (fMRI) scanners and sequences, and consequently a number of "local" activity similarity measures have been defined to describe patterns of segregation and integration at this spatial scale. We have introduced the use of Iso-Distant local Average Correlation (IDAC), easily defined as the average fMRI temporal correlation of a given voxel with other voxels placed at increasingly separated iso-distant intervals, to characterize the curve of local fMRI signal similarities. IDAC curves can be statistically compared using parametric multivariate statistics. Furthermore, by using RGB color-coding to display jointly IDAC values belonging to three different distance lags, IDAC curves can also be displayed as multi-distance IDAC maps. We applied IDAC analysis to a sample of 41 subjects scanned under two different conditions, a resting state and an auditory-visual continuous stimulation. Multi-distance IDAC mapping was able to discriminate between gross anatomo-functional cortical areas and, moreover, was sensitive to modulation between the two brain conditions in areas known to activate and de-activate during audio-visual tasks. Unlike previous fMRI local similarity measures already in use, our approach draws special attention to the continuous smooth pattern of local functional connectivity.

Strain localization band width evolution by electronic speckle pattern interferometry strain rate measurement

Energy Technology Data Exchange (ETDEWEB)

Guelorget, Bruno [Institut Charles Delaunay-LASMIS, Universite de technologie de Troyes, FRE CNRS 2848, 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)], E-mail: bruno.guelorget@utt.fr; Francois, Manuel; Montay, Guillaume [Institut Charles Delaunay-LASMIS, Universite de technologie de Troyes, FRE CNRS 2848, 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)

2009-04-15

In this paper, electronic speckle pattern interferometry strain rate measurements are used to quantify the width of the strain localization band, which occurs when a sheet specimen is submitted to tension. It is shown that the width of this band decreases with increasing strain. Just before fracture, this measured width is about five times wider than the shear band and the initial sheet thickness.

A novel full-field experimental method to measure the local compressibility of gas diffusion media

Energy Technology Data Exchange (ETDEWEB)

Lai, Yeh-Hung; Li, Yongqiang [Electrochemical Energy Research Lab, GM R and D, Honeoye Falls, NY 14472 (United States); Rock, Jeffrey A. [GM Powertrain, Honeoye Falls, NY 14472 (United States)

2010-05-15

The gas diffusion medium (GDM) in a proton exchange membrane (PEM) fuel cell needs to simultaneously satisfy the requirements of transporting reactant gases, removing product water, conducting electrons and heat, and providing mechanical support to the membrane electrode assembly (MEA). Concerning the localized over-compression which may force carbon fibers and other conductive debris into the membrane to cause fuel cell failure by electronically shorting through the membrane, we have developed a novel full-field experimental method to measure the local thickness and compressibility of GDM. Applying a uniform air pressure upon a thin polyimide film bonded on the top surface of the GDM with support from the bottom by a flat metal substrate and measuring the thickness change using the 3-D digital image correlation technique with an out-of-plane displacement resolution less than 0.5 {mu}m, we have determined the local thickness and compressive stress/strain behavior in the GDM. Using the local thickness and compressibility data over an area of 11.2 mm x 11.2 mm, we numerically construct the nominal compressive response of a commercial Toray trademark TGP-H-060 based GDM subjected to compression by flat platens. Good agreement in the nominal stress/strain curves from the numerical construction and direct experimental flat-platen measurement confirms the validity of the methodology proposed in this article. The result shows that a nominal pressure of 1.4 MPa compressed between two flat platens can introduce localized compressive stress concentration of more than 3 MPa in up to 1% of the total area at various locations from several hundred micrometers to 1 mm in diameter. We believe that this full-field experimental method can be useful in GDM material and process development to reduce the local hard spots and help to mitigate the membrane shorting failure in PEM fuel cells. (author)

A novel full-field experimental method to measure the local compressibility of gas diffusion media

Science.gov (United States)

Lai, Yeh-Hung; Li, Yongqiang; Rock, Jeffrey A.

The gas diffusion medium (GDM) in a proton exchange membrane (PEM) fuel cell needs to simultaneously satisfy the requirements of transporting reactant gases, removing product water, conducting electrons and heat, and providing mechanical support to the membrane electrode assembly (MEA). Concerning the localized over-compression which may force carbon fibers and other conductive debris into the membrane to cause fuel cell failure by electronically shorting through the membrane, we have developed a novel full-field experimental method to measure the local thickness and compressibility of GDM. Applying a uniform air pressure upon a thin polyimide film bonded on the top surface of the GDM with support from the bottom by a flat metal substrate and measuring the thickness change using the 3-D digital image correlation technique with an out-of-plane displacement resolution less than 0.5 μm, we have determined the local thickness and compressive stress/strain behavior in the GDM. Using the local thickness and compressibility data over an area of 11.2 mm × 11.2 mm, we numerically construct the nominal compressive response of a commercial Toray™ TGP-H-060 based GDM subjected to compression by flat platens. Good agreement in the nominal stress/strain curves from the numerical construction and direct experimental flat-platen measurement confirms the validity of the methodology proposed in this article. The result shows that a nominal pressure of 1.4 MPa compressed between two flat platens can introduce localized compressive stress concentration of more than 3 MPa in up to 1% of the total area at various locations from several hundred micrometers to 1 mm in diameter. We believe that this full-field experimental method can be useful in GDM material and process development to reduce the local hard spots and help to mitigate the membrane shorting failure in PEM fuel cells.

Separate measurement of local diffusion coefficients in grain boundaries and in adjacent regions

International Nuclear Information System (INIS)

Klotsman, S.M.; Kajgorodov, V.N.

1994-01-01

A new measuring technique is presented that allows one separate determination of grain boundary width and local diffusion coefficients. With the use of the technique presented phenomenological description is accompished for time and temperature dependences of relative and absolute level populations in a zone of preferential intercrystalline diffusion. Local diffusion coefficients obtained for the upper temperature limit of applicability of the technique proposed are in a good agreement with values calculated form coordinate distribution of atoic probes. Local diffusion coefficients determined at lower temperatures essentially differ from those calculated assuming that suction coefficient is equal to a coefficient of volume diffusion. Experimental dta are given for diffusion parameters in Ag, Pd and W polycrystals. 16 refs., 3 figs., 2 tabs

Instantaneous local wave vector estimation from multi-spacecraft measurements using few spatial points

Directory of Open Access Journals (Sweden)

T. D. Carozzi

2004-07-01

Full Text Available We introduce a technique to determine instantaneous local properties of waves based on discrete-time sampled, real-valued measurements from 4 or more spatial points. The technique is a generalisation to the spatial domain of the notion of instantaneous frequency used in signal processing. The quantities derived by our technique are closely related to those used in geometrical optics, namely the local wave vector and instantaneous phase velocity. Thus, this experimental technique complements ray-tracing. We provide example applications of the technique to electric field and potential data from the EFW instrument on Cluster. Cluster is the first space mission for which direct determination of the full 3-dimensional local wave vector is possible, as described here.

Local drift parameter, j/n/sub e/ and resistivity anomaly measurements in CTX spheromaks

International Nuclear Information System (INIS)

Hoida, H.W.; Barnes, C.W.; Henins, I.; Jarboe, T.R.; Marklin, G.; Buchenauer, C.J.; Knox, S.O.

1985-01-01

In a spheromak, the magnetic fields confining the plasma are generated primarily by internal currents rather than external coils. In order to provide information on the possible existence of current-driven microinstabilities, localized measurements of the ratio of the drift velocity of the electrons generating the internal current to their thermal velocity, V/sub d//V/sub th/ proportional to j/n/sub e/√T/sub e/ (known as the drift or streaming parameter), and j/n/sub e/ (proportional to V/sub d/) are needed. These microinstabilities are in some theories associated with an increase in the resistivity anomaly factor (eta/eta/sub Spitzer/). We present results on local measurements (at the magnetic axis) of the values of V/sub d//V/sub th/ and eta/eta/sub Spitzer/ by combining data from the spatially-resolved diagnostics employed on the CTX spheromak experiment, coupled with current density profile information from equilibrium measurements. The values of V/sub d//V/sub th/ and j/n/sub e/ appear to be correlated with local variations in eta/eta/sub Spitzer/, and can be changed by varying the plasma density. Data sets are presented for three values of n/sub e/

Simulating local measurements on a quantum many-body system with stochastic matrix product states

DEFF Research Database (Denmark)

Gammelmark, Søren; Mølmer, Klaus

2010-01-01

We demonstrate how to simulate both discrete and continuous stochastic evolutions of a quantum many-body system subject to measurements using matrix product states. A particular, but generally applicable, measurement model is analyzed and a simple representation in terms of matrix product operators...... is found. The technique is exemplified by numerical simulations of the antiferromagnetic Heisenberg spin-chain model subject to various instances of the measurement model. In particular, we focus on local measurements with small support and nonlocal measurements, which induce long-range correlations....

Precision measurement of the local bias of dark matter halos

Energy Technology Data Exchange (ETDEWEB)

Lazeyras, Titouan; Wagner, Christian; Schmidt, Fabian [Max-Planck-Institut für Astrophysik, Karl-Schwarzschild-Str. 1, Garching, 85748 Germany (Germany); Baldauf, Tobias, E-mail: titouan@mpa-garching.mpg.de, E-mail: cwagner@mpa-garching.mpg.de, E-mail: t.baldauf@tbaweb.de, E-mail: fabians@mpa-garching.mpg.de [Institute for Advanced Study, Einstein Drive, Princeton, NJ, 08540 United States (United States)

2016-02-01

We present accurate measurements of the linear, quadratic, and cubic local bias of dark matter halos, using curved 'separate universe' N-body simulations which effectively incorporate an infinite-wavelength overdensity. This can be seen as an exact implementation of the peak-background split argument. We compare the results with the linear and quadratic bias measured from the halo-matter power spectrum and bispectrum, and find good agreement. On the other hand, the standard peak-background split applied to the Sheth and Tormen (1999) and Tinker et al. (2008) halo mass functions matches the measured linear bias parameter only at the level of 10%. The prediction from the excursion set-peaks approach performs much better, which can be attributed to the stochastic moving barrier employed in the excursion set-peaks prediction. We also provide convenient fitting formulas for the nonlinear bias parameters b{sub 2}(b{sub 1}) and b{sub 3}(b{sub 1}), which work well over a range of redshifts.

Infrared Hollow Optical Fiber Probe for Localized Carbon Dioxide Measurement in Respiratory Tracts.

Science.gov (United States)

Katagiri, Takashi; Shibayama, Kyosuke; Iida, Takeru; Matsuura, Yuji

2018-03-27

A real-time gas monitoring system based on optical absorption spectroscopy is proposed for localized carbon dioxide (CO₂) measurement in respiratory tracts. In this system, a small gas cell is attached to the end of a hollow optical fiber that delivers mid-infrared light with small transmission loss. The diameters of the fiber and the gas cell are smaller than 1.2 mm so that the probe can be inserted into a working channel of common bronchoscopes. The dimensions of the gas cell are designed based on absorption spectra of CO₂ standard gases in the 4.2 μm wavelength region, which are measured using a Fourier-transform infrared spectrometer. A miniature gas cell that is comprised of a stainless-steel tube with slots for gas inlet and a micro-mirror is fabricated. A compact probing system with a quantum cascade laser (QCL) light source is built using a gas cell with a hollow optical fiber for monitoring CO₂ concentration. Experimental results using human breaths show the feasibility of the system for in-situ measurement of localized CO₂ concentration in human airways.

Measuring streetscape complexity based on the statistics of local contrast and spatial frequency.

Directory of Open Access Journals (Sweden)

André Cavalcante

Full Text Available Streetscapes are basic urban elements which play a major role in the livability of a city. The visual complexity of streetscapes is known to influence how people behave in such built spaces. However, how and which characteristics of a visual scene influence our perception of complexity have yet to be fully understood. This study proposes a method to evaluate the complexity perceived in streetscapes based on the statistics of local contrast and spatial frequency. Here, 74 streetscape images from four cities, including daytime and nighttime scenes, were ranked for complexity by 40 participants. Image processing was then used to locally segment contrast and spatial frequency in the streetscapes. The statistics of these characteristics were extracted and later combined to form a single objective measure. The direct use of statistics revealed structural or morphological patterns in streetscapes related to the perception of complexity. Furthermore, in comparison to conventional measures of visual complexity, the proposed objective measure exhibits a higher correlation with the opinion of the participants. Also, the performance of this method is more robust regarding different time scenarios.

The Role of Local Government in Evictions

Directory of Open Access Journals (Sweden)

J van Wyk

2011-06-01

Full Text Available Local government occupies a unique place in the South African system of government. This is circumscribed by the Constitution which contains directives. Enjoining municipalities inter alia to provide democratic and accountable government for local communities and to promote social and economic development (section 152 as well as to undertake developmentally-oriented planning (section 153. In addition local government has a specific role to play regarding access to adequate housing and, in that context, evictions. In terms of sections 25 and 26 of the Constitution as well as legislation enacted in terms of these provisions new and different procedures have been put in place to demarcate the role of municipalities in evictions. The interpretation, by the courts, of these legislative provisions, has created a framework within which municipalities must react to and deal with evictions. In terms of that framework a number of duties and responsibilities are placed on municipalities, which include that they do the following: have policies, actions and programmes in place, draw up proper housing plans, be notified of evictions, mediate and engage with all stakeholders and provide temporary - and suitable alternative - accommodation of a specific standard, all of which must be consistent with principles of human dignity and be reasonable. Against this background this paper will interrogate the role of local government in evictions, concentrating on the constitutional directives for municipalities, the different eviction procedures and the duties and responsibilities of municipalities.

Localized hippocampus measures are associated with Alzheimer pathology and cognition independent of total hippocampal volume.

NARCIS (Netherlands)

Carmichael, O.; Xie, J.; Fletcher, E.; Singh, B.; DeCarli, C.; Olde Rikkert, M.; et al.,

2012-01-01

Hippocampal injury in the Alzheimer's disease (AD) pathological process is region-specific and magnetic resonance imaging (MRI)-based measures of localized hippocampus (HP) atrophy are known to detect region-specific changes associated with clinical AD, but it is unclear whether these measures

Localized hippocampus measures are associated with Alzheimer pathology and cognition independent of total hippocampal volume

NARCIS (Netherlands)

Carmichael, Owen; Xie, Jing; Fletcher, Evan; Singh, Baljeet; Decarli, Charles; A, Saradha; Abdi, Hervé; Abdul Hadi, Normi; Abdulkadir, Ahmed; Abdullah, Afnizanfaizal; Achuthan, Anusha; Adluru, Nagesh; Aggarwal, Namita; Aghajanian, Jania; Agyemang, Alex; Ahdidan, Jamila; Ahmad, Duaa; Ahmed, Shiek; Ahmed, Fareed; Ahmed, Fayeza; Akbarifar, Roshanak; Akhondi-Asl, Alireza; Aksu, Yaman; Alcauter, Sarael; Daniel, Alexander; Alin, Aylin; Alshuft, Hamza; Alvarez-Linera, Juan; Amin-Mansour, Ali; Anderson, Dallas; Anderson, Jeff; Andorn, Anne; Ang, Amma; Angersbach, Steve; Ansarian, Reza; Appaji, Abhishek; Appannah, Arti; Arfanakis, Konstantinos; Armentrout, Steven; Arrighi, Michael; Arumughababu, S. Vethanayaki; Arunagiri, Vidhya; Ashe-McNalley, Cody; Ashford, Wes; Aurelie, Le Page; Avants, Brian; Aviv, Richard; Avula, Ramesh; Richard, Edo; Schmand, Ben

2012-01-01

Hippocampal injury in the Alzheimer's disease (AD) pathological process is region-specific and magnetic resonance imaging (MRI)-based measures of localized hippocampus (HP) atrophy are known to detect region-specific changes associated with clinical AD, but it is unclear whether these measures

Local measurement of interfacial area, interfacial velocity and liquid turbulence in two-phase flow

International Nuclear Information System (INIS)

Hibiki, T.; Hogsett, S.; Ishii, M.

1998-01-01

Double sensor probe and hotfilm anemometry methods were developed for measuring local flow characteristics in bubbly flow. The formulation for the interfacial area concentration measurement was obtained by improving the formulation derived by Kataoka and Ishii. The assumptions used in the derivation of the equation were verified experimentally. The interfacial area concentration measured by the double sensor probe agreed well with one by the photographic method. The filter to validate the hotfilm anemometry for measuring the liquid velocity and turbulent intensity in bubbly flow was developed based on removing the signal due to the passing bubbles. The local void fraction, interfacial area concentration, interfacial velocity, Sauter mean diameter, liquid velocity, and turbulent intensity of vertical upward air-water flow in a round tube with inner diameter of 50.8 mm were measured by using these methods. A total of 54 data sets were acquired consisting of three superficial gas flow rates, 0.039, 0.067, and 0.147 m/s, and three superficial liquid flow rates, 0.60, 1.00, and 1.30 m/s. The measurements were performed at the three locations: L/D=2, 32, and 62. This data is expected to be used for the development of reliable constitutive relations which reflect the true transfer mechanisms in two-phase flow. (author)

Detecting metrologically useful asymmetry and entanglement by a few local measurements

Science.gov (United States)

Zhang, Chao; Yadin, Benjamin; Hou, Zhi-Bo; Cao, Huan; Liu, Bi-Heng; Huang, Yun-Feng; Maity, Reevu; Vedral, Vlatko; Li, Chuan-Feng; Guo, Guang-Can; Girolami, Davide

2017-10-01

Important properties of a quantum system are not directly measurable, but they can be disclosed by how fast the system changes under controlled perturbations. In particular, asymmetry and entanglement can be verified by reconstructing the state of a quantum system. Yet, this usually requires experimental and computational resources which increase exponentially with the system size. Here we show how to detect metrologically useful asymmetry and entanglement by a limited number of measurements. This is achieved by studying how they affect the speed of evolution of a system under a unitary transformation. We show that the speed of multiqubit systems can be evaluated by measuring a set of local observables, providing exponential advantage with respect to state tomography. Indeed, the presented method requires neither the knowledge of the state and the parameter-encoding Hamiltonian nor global measurements performed on all the constituent subsystems. We implement the detection scheme in an all-optical experiment.

Accurate and Integrated Localization System for Indoor Environments Based on IEEE 802.11 Round-Trip Time Measurements

Directory of Open Access Journals (Sweden)

Alfonso Bahillo

2010-01-01

Full Text Available The presence of (Non line of Sight NLOS propagation paths has been considered the main drawback for localization schemes to estimate the position of a (Mobile User MU in an indoor environment. This paper presents a comprehensive wireless localization system based on (Round-Trip Time RTT measurements in an unmodified IEEE 802.11 wireless network. It overcomes the NLOS impairment by implementing the (Prior NLOS Measurements Correction PNMC technique. At first, the RTT measurements are performed with a novel electronic circuit avoiding the need for time synchronization between wireless nodes. At second, the distance between the MU and each reference device is estimated by using a simple linear regression function that best relates the RTT to the distance in (Line of Sight LOS. Assuming that LOS in an indoor environment is a simplification of reality hence, the PNMC technique is applied to correct the NLOS effect. At third, assuming known the position of the reference devices, a multilateration technique is implemented to obtain the MU position. Finally, the localization system coupled with measurements demonstrates that the system outperforms the conventional time-based indoor localization schemes without using any tracking technique such as Kalman filters or Bayesian methods.

Management of the radon-related risk. Guide for local authorities. Guide for employers

International Nuclear Information System (INIS)

Struillou, Yves; Gupta, Olivier

2017-01-01

A first guide aims at being an aid to decision by specifying obligations of local authorities as owners of buildings open to public or as employers, but also at being a support for their health and social actions in terms of information on radon risk in housing. After a presentation of the risk related to radon (health risks, radon propagation, regulatory areas concerned by radon risk management in France), the report indicates the various obligations and mandatory actions for local authorities as building owner and as employer, and actions to be undertaken for existing and new buildings. Technical sheets are provided regarding radon detection, certifications, simple actions, technical diagnosis, remediation works, efficiency control of technical solutions, expert in radiation protection. The second guide aims at being an aid to decision by specifying obligations for employers in terms of management of radon-related risk to which some workers might be exposed, and at providing some good practice recommendations. After a presentation of the risk related to radon (health risks, radon propagation, regulatory areas concerned by radon risk management in France), the report addresses how to organise the radon-related risk management, how to measure radon in work places, how to interpret results and which actions to undertake. Technical sheets are provided regarding radon detection, certifications, simple actions, technical diagnosis, remediation works, efficiency control of technical solutions, expert in radiation protection

Measurement of local dose rates in controlled areas of nuclear power plants. Version 6/85

International Nuclear Information System (INIS)

1985-01-01

Local dose rate measurements according to this regulation, serve the following purposes: Development of preventive measures for radiation protection with respect to maintenance and modifications in controlled areas, e.g. determination of individual measures for personnel protection, development of flow charts and dose rate estimates; monitoring of the personnel's location of activity within the controlled area, including determination of time-dependence of local dose rates and determination of immediate radiation protection measures required; limitation and identification of controlled areas. Such measurements are performed to ensure that the principles of radiation protection as stated in Art. 28 (1) of the Radiation Protection Ordinance with respect to external radiation exposure of the personnel, and the requirements of Art. 61 (1) of the Radiation Protection Ordinance relating to controlled areas are met and the limitation and identification of controlled areas as prescribed in Art 57 (1) of the Radiation Protection Ordinance can be performed. They are not used to determine body doses as per Art. 63 of the Radiation Protection Ordinance. (orig./HP) [de

Local, zero-power void coefficient measurements in the ACPR

Energy Technology Data Exchange (ETDEWEB)

Rivard, J B; Thome, F V [Sandia Laboratories (United States)

1974-07-01

Changes in reactivity may be stimulated in the ACPR by the local introduction of voids into the reactor coolant. The local void coefficients of reactivity which describe this effect are of interest from a reactor safety point-of-view, and their determination is the subject of this presentation. Bottled nitrogen gas was used to produce the voids. The gas was forced out of a small diameter tube which was positioned vertically in the core lattice with its open end below the fuel. The gas was passed through a pressure regulator, a valve, and a flowmeter to establish a steady flow condition, following which a delayed-critical (zero-power) reactor state was established. Correlation of the average volume of core void created by the nitrogen flow with the reactivity worth of the delayed-critical control-rod bank position produced the values of the zero-power void coefficients of reactivity. The void coefficients were determined at various core positions from {approx}6 mm to 142 mm beyond the central irradiation space and for three different flow rates. For the range of void fractions investigated, these coefficients are negative, with values ranging between -$0.02 and -$0.12. Tabular and graphical results of the measurements are presented, and details of the coefficient determination are explained. (author)

Local, zero-power void coefficient measurements in the ACPR

International Nuclear Information System (INIS)

Rivard, J.B.; Thome, F.V.

1974-01-01

Changes in reactivity may be stimulated in the ACPR by the local introduction of voids into the reactor coolant. The local void coefficients of reactivity which describe this effect are of interest from a reactor safety point-of-view, and their determination is the subject of this presentation. Bottled nitrogen gas was used to produce the voids. The gas was forced out of a small diameter tube which was positioned vertically in the core lattice with its open end below the fuel. The gas was passed through a pressure regulator, a valve, and a flowmeter to establish a steady flow condition, following which a delayed-critical (zero-power) reactor state was established. Correlation of the average volume of core void created by the nitrogen flow with the reactivity worth of the delayed-critical control-rod bank position produced the values of the zero-power void coefficients of reactivity. The void coefficients were determined at various core positions from ∼6 mm to 142 mm beyond the central irradiation space and for three different flow rates. For the range of void fractions investigated, these coefficients are negative, with values ranging between -$0.02 and -$0.12. Tabular and graphical results of the measurements are presented, and details of the coefficient determination are explained. (author)

Measurement of the local particle diffusion coefficient in a magnetized plasma

International Nuclear Information System (INIS)

Meyerhofer, D.D.; Levinton, F.M.

1987-02-01

Local impurity particle diffusion coefficients have been measured in a low temperature plasma by the injection of test particles at the center of the plasma. The injection is accomplished by a high voltage discharge between two small graphite electrodes on a probe. The probe can be located anywhere in the plasma. The diffusion is observed spectroscopically. An analysis of the spatial and temporal evolution of the CII radiation from the carbon discharge can determine the parallel and perpendicular diffusion of the impurity ions. Results with the diagnostic have been obtained in the Proto S-1/C spheromak. The measured value of the diffusion coefficient in the afterglow plasma is in good agreement with classical predictions

Infrared Hollow Optical Fiber Probe for Localized Carbon Dioxide Measurement in Respiratory Tracts

Directory of Open Access Journals (Sweden)

Takashi Katagiri

2018-03-01

Full Text Available A real-time gas monitoring system based on optical absorption spectroscopy is proposed for localized carbon dioxide (CO2 measurement in respiratory tracts. In this system, a small gas cell is attached to the end of a hollow optical fiber that delivers mid-infrared light with small transmission loss. The diameters of the fiber and the gas cell are smaller than 1.2 mm so that the probe can be inserted into a working channel of common bronchoscopes. The dimensions of the gas cell are designed based on absorption spectra of CO2 standard gases in the 4.2 μm wavelength region, which are measured using a Fourier-transform infrared spectrometer. A miniature gas cell that is comprised of a stainless-steel tube with slots for gas inlet and a micro-mirror is fabricated. A compact probing system with a quantum cascade laser (QCL light source is built using a gas cell with a hollow optical fiber for monitoring CO2 concentration. Experimental results using human breaths show the feasibility of the system for in-situ measurement of localized CO2 concentration in human airways.

Localized strain measurements of the intervertebral disc annulus during biaxial tensile testing.

Science.gov (United States)

Karakolis, Thomas; Callaghan, Jack P

2015-01-01

Both inter-lamellar and intra-lamellar failures of the annulus have been described as potential modes of disc herniation. Attempts to characterize initial lamellar failure of the annulus have involved tensile testing of small tissue samples. The purpose of this study was to evaluate a method of measuring local surface strains through image analysis of a tensile test conducted on an isolated sample of annular tissue in order to enhance future studies of intervertebral disc failure. An annulus tissue sample was biaxial strained to 10%. High-resolution images captured the tissue surface throughout testing. Three test conditions were evaluated: submerged, non-submerged and marker. Surface strains were calculated for the two non-marker conditions based on motion of virtual tracking points. Tracking algorithm parameters (grid resolution and template size) were varied to determine the effect on estimated strains. Accuracy of point tracking was assessed through a comparison of the non-marker conditions to a condition involving markers placed on tissue surface. Grid resolution had a larger effect on local strain than template size. Average local strain error ranged from 3% to 9.25% and 0.1% to 2.0%, for the non-submerged and submerged conditions, respectively. Local strain estimation has a relatively high potential for error. Submerging the tissue provided superior strain estimates.

Analysis of locally controlled esophageal carcinomas treated with radiotherapy

International Nuclear Information System (INIS)

Gotoh, Yasuo; Yamada, Shogo; Takai, Yoshihiro; Nemoto, Kenji; Ogawa, Yoshihiro; Hoshi, Akihiko; Ariga, Hisanori; Sakamoto, Kiyohiko

1996-01-01

Of 227 esophageal carcinomas treated with a radiation dose of 60 Gy or more, 100 patients had no tumor or ulceration (with or without stenosis) of the esophagus after irradiation. We analyzed local control factors of these 100 patients to determine the need for further treatment. The cumulative local control rate at five years was 40% in all cases, 37% in 21 cases without any stenosis of the esophagus and 40% in 79 cases with stenosis. The presence of stenosis of the esophagus after irradiation was not a critical factor in predicting final local control. Local recurrence of tumors with findings of Borrmann III or Borrmann IV by the pretreatment esophageal barium study, tumors controlled after a total dose of more than 80 Gy, tumors without low dose rate telecobalt therapy (LDRT: 1 Gy/hour, 5 to 7 Gy/day, a total dose of 12 to 15 Gy) as boost therapy, and apparently controlled tumors with a stenotic ratio of 60% or more or with 5 cm or more length of stenosis of the esophagus after irradiation was significantly higher than that of the others (p<0.05). Multivariate analysis revealed that findings of pretreatment barium study, total dose, with or without LDRT, and length of stenosis of the esophagus after irradiation were significantly important factors in local control. Members of the high risk group of apparently controlled tumors should undertake surgical treatment or further intensive chemotherapy. (author)

Fusion product measurements of the local ion thermal diffusivity in the PLT tokamak

International Nuclear Information System (INIS)

Heidbrink, W.W.; Lovberg, J.; Strachan, J.D.; Bell, R.E.

1986-03-01

Measurement of the gradient of the d-d fusion rate profile in an ohmic PLT plasma is used to deduce the gradient of the ion temperature and, thus, the local ion thermal diffusivity through an energy balance analysis. The inferred ion diffusivity is consistent with neoclassical theory

Neutron radiography characterization of an operating proton exchange membrane fuel cell with localized current distribution measurements

International Nuclear Information System (INIS)

Gagliardo, J.J.; Owejan, J.P.; Trabold, T.A.; Tighe, T.W.

2009-01-01

Neutron radiography has proven to be a powerful tool to study and understand the effects of liquid water in an operating fuel cell. In the present work, this experimental method is coupled with locally resolved current and ohmic resistance measurements, giving additional insight into water management and fuel cell performance under a variety of conditions. The effects of varying the inlet humidification level and the current density of the 50 cm 2 cell are studied by simultaneously monitoring electrochemical performance with a 10x10 matrix of current sensors, and liquid water volumes are measured using the National Institute of Standards and Technology (NIST) neutron imaging facility. A counter flow, straight channel proton exchange membrane (PEM) fuel cell is used to demonstrate localized performance loss corresponds to water-filled channels that impede gas transport to the catalyst layer, thereby creating an area that has low current density. Furthermore, certain operating conditions causing excess water accumulation in the channels can result in localized proton resistance increase, a result that can only be accurately observed with combined radiography and distributed electrochemical measurements.

Localization in Wireless Sensor Networks: A Survey on Algorithms, Measurement Techniques, Applications and Challenges

Directory of Open Access Journals (Sweden)

Anup Kumar Paul

2017-10-01

Full Text Available Localization is an important aspect in the field of wireless sensor networks (WSNs that has developed significant research interest among academia and research community. Wireless sensor network is formed by a large number of tiny, low energy, limited processing capability and low-cost sensors that communicate with each other in ad-hoc fashion. The task of determining physical coordinates of sensor nodes in WSNs is known as localization or positioning and is a key factor in today’s communication systems to estimate the place of origin of events. As the requirement of the positioning accuracy for different applications varies, different localization methods are used in different applications and there are several challenges in some special scenarios such as forest fire detection. In this paper, we survey different measurement techniques and strategies for range based and range free localization with an emphasis on the latter. Further, we discuss different localization-based applications, where the estimation of the location information is crucial. Finally, a comprehensive discussion of the challenges such as accuracy, cost, complexity, and scalability are given.

The localization of focal heart activity via body surface potential measurements: tests in a heterogeneous torso phantom

International Nuclear Information System (INIS)

Wetterling, F; Liehr, M; Haueisen, J; Schimpf, P; Liu, H

2009-01-01

The non-invasive localization of focal heart activity via body surface potential measurements (BSPM) could greatly benefit the understanding and treatment of arrhythmic heart diseases. However, the in vivo validation of source localization algorithms is rather difficult with currently available measurement techniques. In this study, we used a physical torso phantom composed of different conductive compartments and seven dipoles, which were placed in the anatomical position of the human heart in order to assess the performance of the Recursively Applied and Projected Multiple Signal Classification (RAP-MUSIC) algorithm. Electric potentials were measured on the torso surface for single dipoles with and without further uncorrelated or correlated dipole activity. The localization error averaged 11 ± 5 mm over 22 dipoles, which shows the ability of RAP-MUSIC to distinguish an uncorrelated dipole from surrounding sources activity. For the first time, real computational modelling errors could be included within the validation procedure due to the physically modelled heterogeneities. In conclusion, the introduced heterogeneous torso phantom can be used to validate state-of-the-art algorithms under nearly realistic measurement conditions.

The localization of focal heart activity via body surface potential measurements: tests in a heterogeneous torso phantom

Science.gov (United States)

Wetterling, F.; Liehr, M.; Schimpf, P.; Liu, H.; Haueisen, J.

2009-09-01

The non-invasive localization of focal heart activity via body surface potential measurements (BSPM) could greatly benefit the understanding and treatment of arrhythmic heart diseases. However, the in vivo validation of source localization algorithms is rather difficult with currently available measurement techniques. In this study, we used a physical torso phantom composed of different conductive compartments and seven dipoles, which were placed in the anatomical position of the human heart in order to assess the performance of the Recursively Applied and Projected Multiple Signal Classification (RAP-MUSIC) algorithm. Electric potentials were measured on the torso surface for single dipoles with and without further uncorrelated or correlated dipole activity. The localization error averaged 11 ± 5 mm over 22 dipoles, which shows the ability of RAP-MUSIC to distinguish an uncorrelated dipole from surrounding sources activity. For the first time, real computational modelling errors could be included within the validation procedure due to the physically modelled heterogeneities. In conclusion, the introduced heterogeneous torso phantom can be used to validate state-of-the-art algorithms under nearly realistic measurement conditions.

Analysis of the Portuguese legal framework concerning the safeguarding of employees' rights in the event of the transfer of an undertaking or an establishment compliance with the directive 2001/23/CE of 12 march 2001

Directory of Open Access Journals (Sweden)

Sónia de Carvalho

2015-12-01

Full Text Available The undertaking, business, or part of an undertaking or business can be transferred to another person or corporation as a result of a merger or a legal transfer, transitory or definitive. As a consequence of the transfer, there is subrogation ex lege of the transferee in the rights and obligations arising from the employment relationship existing on the date of a transfer. This issue is of the utmost importance to accomplish the freedom of the employer negotiate the undertaking and the protection of employees' rights as well. The Portuguese legal framework has been shaped by Directive 77/187/ CEE and subsequently by Directive 2001/23/CE. In this paper, in order to assess the compliance of the legal framework concerning the enshrined in Labor Code with the Directive 2001/23/CE, it will be performed a comparative analysis between both regulations, which will be coordinated with the case law from the Court of Justice and Portuguese Courts. We will conclude that, apart from some issues, the Portuguese labour law regarding the safeguarding of employees' rights in the event of the transfer of an undertaking complies with the Directive 2001/23 /CE and the case law from the Court of Justice.

Tuneable diode laser spectroscopy correction factor investigation on ammonia measurement

Science.gov (United States)

Li, Nilton; El-Hamalawi, Ashraf; Baxter, Jim; Barrett, Richard; Wheatley, Andrew

2018-01-01

Current diesel engine aftertreatment systems, such as Selective Catalyst Reduction (SCR) use ammonia (NH3) to reduce Nitrogen Oxides (NOx) into Nitrogen (N2) and water (H2O). However, if the reaction between NH3 and NOx is unbalanced, it can lead either NH3 or NOx being released into the environment. As NH3 is classified as a dangerous compound in the environment, its accurate measurement is essential. Tuneable Diode Laser (TDL) spectroscopy is one of the methods used to measure raw emissions inside engine exhaust pipes, especially NH3. This instrument requires a real-time exhaust temperature, pressure and other interference compounds in order to adjust itself to reduce the error in NH3 readings. Most researchers believed that exhaust temperature and pressure were the most influential factors in TDL when measuring NH3 inside exhaust pipes. The aim of this paper was to quantify these interference effects on TDL when undertaking NH3 measurement. Surprisingly, the results show that pressure was the least influential factor when compared to temperature, H2O, CO2 and O2 when undertaking NH3 measurement using TDL.

REVERBERATION MAPPING MEASUREMENTS OF BLACK HOLE MASSES IN SIX LOCAL SEYFERT GALAXIES

International Nuclear Information System (INIS)

Denney, K. D.; Peterson, B. M.; Pogge, R. W.; Atlee, D. W.; Bentz, M. C.; Bird, J. C.; Comins, M. L.; Dietrich, M.; Eastman, J. D.; Adair, A.; Au-Yong, K.; Chisholm, E.; Ewald, S.; Ferbey, S.; Jackson, K.; Brokofsky, D. J.; Gaskell, C. M.; Hedrick, C. H.; Doroshenko, V. T.; Efimov, Y. S.

2010-01-01

We present the final results from a high sampling rate, multi-month, spectrophotometric reverberation mapping campaign undertaken to obtain either new or improved Hβ reverberation lag measurements for several relatively low-luminosity active galactic nuclei (AGNs). We have reliably measured the time delay between variations in the continuum and Hβ emission line in six local Seyfert 1 galaxies. These measurements are used to calculate the mass of the supermassive black hole at the center of each of these AGNs. We place our results in context to the most current calibration of the broad-line region (BLR) R BLR -L relationship, where our results remove outliers and reduce the scatter at the low-luminosity end of this relationship. We also present velocity-resolved Hβ time-delay measurements for our complete sample, though the clearest velocity-resolved kinematic signatures have already been published.

Anti-Weak Localization Measurements in the Ballistic Regime

Science.gov (United States)

Jayathilaka, Dilhani; Dedigama, Aruna; Murphy, Sheena; Edirisooriya, Madhavie; Goel, Niti; Mishima, Tetsuya; Santos, Michael; Mullen, Kieran

2007-03-01

Anti-weak localization dominates at low fields in systems in which spin-orbit coupling is strong. The experimental results are well described by theory [1] in low mobility systems in which the magnetic length (lB) is greater than the mean free path; however high mobility systems with strong spin-orbit interactions, such the InSb based two dimensional systems (2DESs) examined here, are not in this diffusive regime. A recently developed theory [2] addresses both the diffusive and ballistic regimes taking into account both the backscattered and non-backscattered contributions to the conductivity. We will discuss the agreement of the new theory to measurements of InSb 2DESs prepared with both strong Dresselhaus and Rashba effects. [1] S.V. Iordanskii, Yu B. Lyanda-Geller, and G.E. Pikus, JETP Lett. 60, 206 (1994). [2] L.E. Golub, Phys. Rev. B. 71, 235310 (2005).

Implementing the ban on smoking in Israeli pubs: measuring airborne nicotine and enforcement by local authorities.

Science.gov (United States)

Satran, Carmit; Drach-Zahavy, Anat; Hammond, S Katharine; Baron-Epel, Orna

2014-06-01

In 2007 an amendment to the law restricting smoking in pubs and bars (P&Bs) was enacted in Israel. However, a year after the ban only slight decreases in airborne smoke in P&Bs in one city have been reported. We aimed to assess levels of airborne nicotine in Israeli P&Bs and to measure ifself-reported enforcement of the law by local officials was associated with levels of airborne nicotine in P&Bs. Airborne nicotine levels were measured in 72 P&Bs in 29 towns in Israel; this consisted of 90% of eligible towns. In addition, 73 local authority officials were interviewed in 25 of these towns. The officials were asked to assess the local authority's level of enforcement of the law banning smoking in P&Bs. The association of levels of airborne nicotine with the levels of enforcement of the law was calculated. Data were collected during 2009-2010 and analyzed in 2010-2011. Levels of airborne nicotine were comparatively high in P&Bs. No association was detected between levels of nicotine and the P&Bs' characteristics. In the larger towns, levels of airborne nicotine were higher. In 16% of towns the local authority officials reported high levels of law enforcement. Generally, levels of reported enforcement by local authorities were low and did not predict levels of airborne nicotine in the P&Bs. Self-reported local authorities' law enforcement was not associated with levels of airborne nicotine in P&Bs in these towns. There is a need to develop ways to increase law enforcement by the local authorities or other agencies.

Community energy and emissions planning : a guide for BC local governments

International Nuclear Information System (INIS)

2008-09-01

British Columbia (BC) local governments are becoming more interested in completing an energy and greenhouse gas emissions plan for their community as awareness of climate change grows and energy prices escalate. The purpose of this guide was to support local government elected officials and staff in undertaking an energy and emissions planning process. This guide described the purpose and content of a community energy and emissions plan, its benefits, and how to go about creating one. Specifically, the guide provided practical tips, examples from BC communities, and links to more detailed information. Topics that were presented in the guide included engagement; inventories; target-setting; action plan; implementation and monitoring; and funding and resources. It was concluded that the key to long-term success is to maintain good communication with council/board, staff and the public. The document emphasized that it is important to make sure that people know the work being undertaken, and the results achieved, so that momentum is not lost. refs., tabs., figs

POLARIZATION MEASUREMENTS OF HOT DUST STARS AND THE LOCAL INTERSTELLAR MEDIUM

Energy Technology Data Exchange (ETDEWEB)

Marshall, J. P.; Cotton, D. V.; Bott, K.; Bailey, J.; Kedziora-Chudczer, L. [School of Physics, UNSW Australia, High Street, Kensington, NSW 2052 (Australia); Ertel, S. [Steward Observatory, Department of Astronomy, University of Arizona, 933 N. Cherry Avenue, Tucson, AZ 85721 (United States); Kennedy, G. M.; Wyatt, M. C. [Institute of Astronomy, University of Cambridge, Madingley Road, Cambridge, CB3 0HA (United Kingdom); Burgo, C. del [Instituto Nacional de Astrofísica, Óptica y Electrónica, Luis Enrique Erro 1, Sta. Ma. Tonantzintla, Puebla (Mexico); Absil, O. [Institut d’Astrophysique et de Géophysique, University of Liège, 19c allée du Six Août, B-4000 Liège (Belgium)

2016-07-10

Debris discs are typically revealed through the presence of excess emission at infrared wavelengths. Most discs exhibit excess at mid- and far-infrared wavelengths, analogous to the solar system’s Asteroid and Edgeworth-Kuiper belts. Recently, stars with strong (∼1%) excess at near-infrared wavelengths were identified through interferometric measurements. Using the HIgh Precision Polarimetric Instrument, we examined a sub-sample of these hot dust stars (and appropriate controls) at parts-per-million sensitivity in SDSS g ′ (green) and r ′ (red) filters for evidence of scattered light. No detection of strongly polarized emission from the hot dust stars is seen. We, therefore, rule out scattered light from a normal debris disk as the origin of this emission. A wavelength-dependent contribution from multiple dust components for hot dust stars is inferred from the dispersion (the difference in polarization angle in red and green) of southern stars. Contributions of 17 ppm (green) and 30 ppm (red) are calculated, with strict 3- σ upper limits of 76 and 68 ppm, respectively. This suggests weak hot dust excesses consistent with thermal emission, although we cannot rule out contrived scenarios, e.g., dust in a spherical shell or face-on discs. We also report on the nature of the local interstellar medium (ISM), obtained as a byproduct of the control measurements. Highlights include the first measurements of the polarimetric color of the local ISM and the discovery of a southern sky region with a polarization per distance thrice the previous maximum. The data suggest that λ {sub max}, the wavelength of maximum polarization, is bluer than typical.

Contributed Review: Source-localization algorithms and applications using time of arrival and time difference of arrival measurements

Energy Technology Data Exchange (ETDEWEB)

Li, Xinya [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, USA; Deng, Zhiqun Daniel [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, USA; Rauchenstein, Lynn T. [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, USA; Carlson, Thomas J. [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, USA

2016-04-01

Locating the position of fixed or mobile sources (i.e., transmitters) based on received measurements from sensors is an important research area that is attracting much research interest. In this paper, we present localization algorithms using time of arrivals (TOA) and time difference of arrivals (TDOA) to achieve high accuracy under line-of-sight conditions. The circular (TOA) and hyperbolic (TDOA) location systems both use nonlinear equations that relate the locations of the sensors and tracked objects. These nonlinear equations can develop accuracy challenges because of the existence of measurement errors and efficiency challenges that lead to high computational burdens. Least squares-based and maximum likelihood-based algorithms have become the most popular categories of location estimators. We also summarize the advantages and disadvantages of various positioning algorithms. By improving measurement techniques and localization algorithms, localization applications can be extended into the signal-processing-related domains of radar, sonar, the Global Positioning System, wireless sensor networks, underwater animal tracking, mobile communications, and multimedia.

Local flow measurements at the inlet spike tip of a Mach 3 supersonic cruise airplane

Science.gov (United States)

Johnson, H. J.; Montoya, E. J.

1973-01-01

The flow field at the left inlet spike tip of a YF-12A airplane was examined using at 26 deg included angle conical flow sensor to obtain measurements at free-stream Mach numbers from 1.6 to 3.0. Local flow angularity, Mach number, impact pressure, and mass flow were determined and compared with free-stream values. Local flow changes occurred at the same time as free-stream changes. The local flow usually approached the spike centerline from the upper outboard side because of spike cant and toe-in. Free-stream Mach number influenced the local flow angularity; as Mach number increased above 2.2, local angle of attack increased and local sideslip angle decreased. Local Mach number was generally 3 percent less than free-stream Mach number. Impact-pressure ratio and mass flow ratio increased as free-stream Mach number increased above 2.2, indicating a beneficial forebody compression effect. No degradation of the spike tip instrumentation was observed after more than 40 flights in the high-speed thermal environment encountered by the airplane. The sensor is rugged, simple, and sensitive to small flow changes. It can provide accurate imputs necessary to control an inlet.

A fiber-optic strain measurement and quench localization system for use in superconducting accelerator dipole magnets

NARCIS (Netherlands)

van Oort, J.M.; Scanlan, Ronald M.; ten Kate, Herman H.J.

1995-01-01

A novel fiber-optic measurement system for superconducting accelerator magnets is described. The principal component is an extrinsic Fabry-Perot interferometer to determine localized strain and stress in coil windings. The system can be used either as a sensitive relative strain measurement system

Local conditional entropy in measure for covers with respect to a fixed partition

Science.gov (United States)

Romagnoli, Pierre-Paul

2018-05-01

In this paper we introduce two measure theoretical notions of conditional entropy for finite measurable covers conditioned to a finite measurable partition and prove that they are equal. Using this we state a local variational principle with respect to the notion of conditional entropy defined by Misiurewicz (1976 Stud. Math. 55 176–200) for the case of open covers. This in particular extends the work done in Romagnoli (2003 Ergod. Theor. Dynam. Syst. 23 1601–10), Glasner and Weiss (2006 Handbook of Dynamical Systems vol 1B (Amsterdam: Elsevier)) and Huang et al (2006 Ergod. Theor. Dynam. Syst. 26 219–45).

Optimal distribution of temperature points in μSR measurement of local field

International Nuclear Information System (INIS)

Pełka, R.; Zieliński, P.M.; Konieczny, P.; Wasiutyński, T.

2013-01-01

Three possible distributions of temperature points in the μSR measurement of local field (order parameter) are discussed. The least square method is applied to estimate the scale of the deviations of the fitted parameters from the true values. It indicates that the distribution corresponding to a uniform section of the order parameter values (uniform-in-signal) incurs the smallest errors. The distribution constructed on the basis of the zeros of the Chebyshev polynomials yields comparable uncertainties, while the uniform-in-temperature distribution turns out to be least effective incurring considerably larger errors. These findings can be useful while planning an order parameter measurement in the μSR experiment

Diffuse and localized reflectance measurements of hemoglobin and hematocrit in human skin

Science.gov (United States)

Khalil, Omar S.; Wu, Xiaomao; Yeh, Shu-Jen; Jeng, Tzyy-Wen

2001-05-01

We conducted visible/near infrared optical measurements on the forearm of human subjects using a commercial diffuse reflectance spectrophotometer, and a breadboard temperature- controlled localized reflectance tissue photometer. Calibration relationships were established between skin reflectance signal and reference blood hemoglobin (Hb) concentration, or hematocrit values (Hct). These were then used to predict Hb and Hct values from optical measurement in a cross validation analysis. Different linear least- squares models for the prediction of Hb and Hct are presented and shows the ability to predict both. It was possible to screen prospective blood donors with low Hb concentration. It was possible to predict anemic subjects in the limited prospective blood donor population.

[Does the Fragmented Images Test measure locally oriented visual processing in autism spectrum disorders?].

Science.gov (United States)

Scheurich, Armin; Fellgiebel, Andreas; Müller, Mattias J; Poustka, Fritz; Bölte, Sven

2010-03-01

The cognitive phenotype of autism spectrum disorders (ASD) is characterized among other things by local processing (weak central coherence). It was examined whether a test that measures identification of fragmented pictures (FBT) is able to seize this preference for local processing. The FBT performance of 15 patients with ASD, 16 with depression, 16 with schizophrenia and of 16 control subjects was compared. In addition, two tests well known to be sensitive to local processing were assessed, namely the Embedded Figures Test (EFT) and the Block Design Test (BDT). ASD patients demonstrated a preference for local processing. Difficulties in global processing, or more specifically in gestalt perception (FBT), were accompanied by good performance on the EFT and BDT as expected. Controlling for age and nonverbal intelligence (ANCOVA) reduced differences to trends. However, the calculation of difference scores (i.e., subtraction of FBT from EFT performance) resulted in significant differences between ASD and control groups even after controlling for of age and intelligence. The FBT is a suitable exploratory test of local visual processing in ASD. In particular, a difference criterion can be generated (FBT vs. EFT) that discriminates between ASD and clinical as well as healthy control groups.

Utility of local health registers in measuring perinatal mortality: a case study in rural Indonesia.

Science.gov (United States)

Burke, Leona; Suswardany, Dwi Linna; Michener, Keryl; Mazurki, Setiawaty; Adair, Timothy; Elmiyati, Catur; Rao, Chalapati

2011-03-17

Perinatal mortality is an important indicator of obstetric and newborn care services. Although the vast majority of global perinatal mortality is estimated to occur in developing countries, there is a critical paucity of reliable data at the local level to inform health policy, plan health care services, and monitor their impact. This paper explores the utility of information from village health registers to measure perinatal mortality at the sub district level in a rural area of Indonesia. A retrospective pregnancy cohort for 2007 was constructed by triangulating data from antenatal care, birth, and newborn care registers in a sample of villages in three rural sub districts in Central Java, Indonesia. For each pregnancy, birth outcome and first week survival were traced and recorded from the different registers, as available. Additional local death records were consulted to verify perinatal mortality, or identify deaths not recorded in the health registers. Analyses were performed to assess data quality from registers, and measure perinatal mortality rates. Qualitative research was conducted to explore knowledge and practices of village midwives in register maintenance and reporting of perinatal mortality. Field activities were conducted in 23 villages, covering a total of 1759 deliveries that occurred in 2007. Perinatal mortality outcomes were 23 stillbirths and 15 early neonatal deaths, resulting in a perinatal mortality rate of 21.6 per 1000 live births in 2007. Stillbirth rates for the study population were about four times the rates reported in the routine Maternal and Child Health program information system. Inadequate awareness and supervision, and alternate workload were cited by local midwives as factors resulting in inconsistent data reporting. Local maternal and child health registers are a useful source of information on perinatal mortality in rural Indonesia. Suitable training, supervision, and quality control, in conjunction with computerisation to

Localization of small arms fire using acoustic measurements of muzzle blast and/or ballistic shock wave arrivals.

Science.gov (United States)

Lo, Kam W; Ferguson, Brian G

2012-11-01

The accurate localization of small arms fire using fixed acoustic sensors is considered. First, the conventional wavefront-curvature passive ranging method, which requires only differential time-of-arrival (DTOA) measurements of the muzzle blast wave to estimate the source position, is modified to account for sensor positions that are not strictly collinear (bowed array). Second, an existing single-sensor-node ballistic model-based localization method, which requires both DTOA and differential angle-of-arrival (DAOA) measurements of the muzzle blast wave and ballistic shock wave, is improved by replacing the basic external ballistics model (which describes the bullet's deceleration along its trajectory) with a more rigorous model and replacing the look-up table ranging procedure with a nonlinear (or polynomial) equation-based ranging procedure. Third, a new multiple-sensor-node ballistic model-based localization method, which requires only DTOA measurements of the ballistic shock wave to localize the point of fire, is formulated. The first method is applicable to situations when only the muzzle blast wave is received, whereas the third method applies when only the ballistic shock wave is received. The effectiveness of each of these methods is verified using an extensive set of real data recorded during a 7 day field experiment.

Neutron localization measurements from a two-gun plasma focus device

International Nuclear Information System (INIS)

Yeh, T.R.; Wen, M.; Tzeng, C.C.; Shang, D.J.; Yeh, C.K.; Wu, K.S.; Kuo, Y.Y.; Hou, W.S.

1989-01-01

The simultaneous formation of the two deuterium plasma foci has been reported recently by Hou, W.S., et al, in Procs I.E.E.E. Int. Conf. on Plasma Science, 1986, 87, in a Mather type two-gun plasma focus assembly with maximum bank energy of ∼700 kJ. In addition, these plasmas will evolve and then produce a disk-shaped plasma in the middle of the two plasma foci. Soft X-ray filter techniques which allow measurements of the electron temperature at both pinch points and the middle point yielded a few hundred eV for these three regions. Neutron localization measurements which were carried out with a collimator and a scintillator-fiber-photomultiplier assembly indicate that an enhancement of ∼80% in neutron yield is observed in the middle region as the separation between two electrodes is 9.1 cm. Further experimental evidence shows that the neutron production in the middle region is the result of the beam-beam interaction in nature. (author)

The Ironbridge Gorge Heritage Site and its local and regional functions

Directory of Open Access Journals (Sweden)

Cudny Waldemar

2017-06-01

Full Text Available The article is devoted to the issue of heritage and its functions. Based on the existing literature, the author presents the definition of heritage, the classification of heritage resources, and its most important impacts. The aim of the article was to show the functions that may be performed by a heritage site, locally and regionally. The example used by the author is the Ironbridge Gorge Heritage Site in the United Kingdom. Most heritage functions described by other authors are confirmed in this case study. The cultural heritage of the Ironbridge Gorge creates an opportunity to undertake various local and regional activities, having first of all an educational influence on the inhabitants, school youth and tourists. We must not ignore the economicinfluences, such as financing the activity of the Ironbridge Trust (the institution administering the site, generating income for local firms providing service to tourists, or for construction companies. This income helps to preserve and conserve the tangible heritage of the Ironbridge Gorge, as well as to generate jobs in heritage management, conservation and heritage tourism. Other effects of the Ironbridge Gorge Site include a socio-cultural impact or that related to sustainable development.

A Voltage Instability Predictor Using Local Area Measurements. VIP++

Energy Technology Data Exchange (ETDEWEB)

Warland, Leif

2002-07-01

There has been a pressure to operate power systems closer to their security limits. This has partially been due to financial imperatives following the deregulating of markets. Other practical difficulties have been obtaining authorization from regulatory bodies to build power plants and transmission lines. In this situation it is essential to monitor the system and to have tools that can predict the distance to the point of collapse (PoC). Much effort has been put into research of the phenomenon voltage collapse, and many approaches have been explored. Both dynamic and steady-state behavior have been studied thoroughly, though very few protection and control schemes have been implemented. In this dissertation the possibility of an index based on local area measurements have been explored. Voltage stability can be classified as either a transient or a long-term stability problem, and the index proposed in this dissertation is based on long-term dynamics. The VIP algorithm is a method that uses the maximum load ability of a transmission network as the PoC, thus by estimating a Thevenin equivalent the method can track the distance to the PoC as this occurs when the two impedances are equal in absolute value. The problem of the VIP algorithm is that it is based on a system with two equations and four unknowns, thus it is not observable. In order to make it observable the assumption of constant Thevenin equivalent between two sets of measurements is made. When this is not the case the method will estimate a Thevenin impedance of the same size as the measured load impedance, but with a negative sign. Changes in the Thevenin equivalent can be traced to both angle variation in a remote generator area or to variations in load impedances on nearby buses. The problem of angle variations can be mitigated by the selection of an appropriate reference bus. A method to solve the second problem, of variation in load admittances, has been proposed in this dissertation and given the

Local entropy as a measure for sampling solutions in constraint satisfaction problems

International Nuclear Information System (INIS)

Baldassi, Carlo; Ingrosso, Alessandro; Lucibello, Carlo; Saglietti, Luca; Zecchina, Riccardo

2016-01-01

We introduce a novel entropy-driven Monte Carlo (EdMC) strategy to efficiently sample solutions of random constraint satisfaction problems (CSPs). First, we extend a recent result that, using a large-deviation analysis, shows that the geometry of the space of solutions of the binary perceptron learning problem (a prototypical CSP), contains regions of very high-density of solutions. Despite being sub-dominant, these regions can be found by optimizing a local entropy measure. Building on these results, we construct a fast solver that relies exclusively on a local entropy estimate, and can be applied to general CSPs. We describe its performance not only for the perceptron learning problem but also for the random K-satisfiabilty problem (another prototypical CSP with a radically different structure), and show numerically that a simple zero-temperature Metropolis search in the smooth local entropy landscape can reach sub-dominant clusters of optimal solutions in a small number of steps, while standard Simulated Annealing either requires extremely long cooling procedures or just fails. We also discuss how the EdMC can heuristically be made even more efficient for the cases we studied. (paper: disordered systems, classical and quantum)

Measuring the authority of local public health directors in the context of organizational structure: an exploratory, multimodal approach.

Science.gov (United States)

Miner Gearin, Kimberly J; Thrash, Allison M Rick; Frauendienst, Renee; Myhre, Julie; Gyllstrom, M Elizabeth; Riley, William J; Schroeder, Janelle

2012-11-01

Studies have reported a relationship between the organization of public health services and variability in public health practice at the local and state levels. A national research agenda has prioritized practice-based research to understand pathways that lead to this variation and examine the impact of these differences on outcomes. To measure the extent to which Minnesota local health directors report having key authorities and examine the relationship between organizational structure and authority of local health directors. : Multimodal. Minnesota local health departments. Directors of Minnesota local health departments. Director authorities. Most Minnesota local health directors reported having 6 key authorities related to budget preparation and modification and interaction with local elected officials (n = 51, 71%). Twelve directors (16%) reported that they have 4 or fewer of the 6 authorities. The authority most commonly reported as lacking was the authority to initiate communication with locally elected officials (n = 15, 21%). The percentage of directors who reported having all 6 authorities was higher among those in stand-alone departments (82%) than those in combined organizations (50%). This descriptive study illustrates that emerging practice-based research networks can successfully collaborate on small-scale research projects with immediate application for systems development. Study findings are being used by local public health officials to help articulate their role, aid in succession planning, and inform elected officials, who need to consider the public health implications of potential changes to local public health governance and organization. More studies are needed to refine measurement of authority and structure.

Numerical evaluation of the five sensor probe method for measurement of local interfacial area concentration of cap bubbles

International Nuclear Information System (INIS)

Euh, D.J.; Yun, B.J.; Song, C.H.; Kwon, T.S.; Chung, M.K.; Lee, U.C.

2000-01-01

The interfacial area concentration (IAC) is one of the most important parameters in the two-fluid model for two-phase flow analysis. The IAC can be measured by a local conductivity probe method that uses the difference of conductivity between water and air/steam. The number of sensors in the conductivity probe may be differently chosen by considering the flow regime of two-phase flow. The four sensor conductivity probe method predicts the IAC without any assumptions of the bubble shape. The local IAC can be obtained by measuring the three dimensional velocity vector elements at the measuring point, and the directional cosines of the sensors. The five sensor conductivity probe method proposed in this study is based on the four sensor probe method. With the five sensor probe, the local IAC for a given referred measuring area of the probe can be predicted more exactly. In this paper, the mathematical approach of the five sensor probe method for measuring the IAC is described, and a numerical simulation is carried out for ideal cap bubbles of which the sizes and locations are determined by a random number generator. (author)

A fiber optic strain measurement and quench localization for use in superconducting accelerator dipole magnets

International Nuclear Information System (INIS)

van Oort, J.M.; Scanlan, R.M.; ten Kate, H.H.J.

1994-01-01

A novel fiber-optic measurement system for superconducting accelerator magnets is described. The principal component is an extrinsic Fabry-Perot Interferometer to determine localized strain and stress in coil windings. The system can be used either as a sensitive relative strain measurement system or as an absolute strain detector. Combined, one can monitor the mechanical behaviour of the magnet system over time during construction, long time storage and operation. The sensing mechanism is described, together with various tests in laboratory environments. The test results of a multichannel test matrix to be incorporated first in the dummy coils and then in the final version of a 13T Nb 3 Sn accelerator dipole magnet are presented. Finally, the possible use of this system as a quench localization system is proposed

A high energy microscope for local strain measurements within bulk materials

DEFF Research Database (Denmark)

Lienert, U.; Poulsen, H.F.; Martins, R.V.

2000-01-01

A novel diffraction technique for local, three dimensional strain scanning within bulk materials is presented. The technique utilizes high energy, micro-focussed synchrotron radiation which can penetrate several millimeters into typical metals. The spatial resolution can be as narrow as 1 mum...... in one dimension and in three dimensions about 5x10x100 mum(3) Bulk properties are probed non-destructively and in-situ measurements during thermo-mechanical processing are feasible. A dedicated experimental station has been constructed at the ID11 beamline of the European Synchrotron Radiation Facility...

Quantitative measurement of local elasticity of SiOx film by atomic force acoustic microscopy

International Nuclear Information System (INIS)

Cun-Fu, He; Gai-Mei, Zhang; Bin, Wu

2010-01-01

In this paper the elastic properties of SiO x film are investigated quantitatively for local fixed point and qualitatively for overall area by atomic force acoustic microscopy (AFAM) in which the sample is vibrated at the ultrasonic frequency while the sample surface is touched and scanned with the tip contacting the sample respectively for fixed point and continuous measurements. The SiO x films on the silicon wafers are prepared by the plasma enhanced chemical vapour deposition (PECVD). The local contact stiffness of the tip-SiO x film is calculated from the contact resonance spectrum measured with the atomic force acoustic microscopy. Using the reference approach, indentation modulus of SiO x film for fixed point is obtained. The images of cantilever amplitude are also visualized and analysed when the SiO x surface is excited at a fixed frequency. The results show that the acoustic amplitude images can reflect the elastic properties of the sample. (classical areas of phenomenology)

Local orientation measurements in 3D

DEFF Research Database (Denmark)

Juul Jensen, D.

2005-01-01

The 3 Dimensional X-Ray Diffraction (3DXRD) method is presented and its potentials illustrated by examples. The 3DXRD method is based on diffraction of high energy X-rays and allows fast and nondestructive 3D characterization of the local distribution of crystallographic orientations in the bulk....

Local liquid velocity measurement of Trickle Bed Reactor using Digital Industrial X-ray Radiography

Science.gov (United States)

Mohd Salleh, Khairul Anuar

Trickle Bed Reactors (TBRs) are fixed beds of particles in which both liquid and gas flow concurrently downward. They are widely used to produce not only fuels but also lubrication products. The measurement and the knowledge of local liquid velocities (VLL) in TBRs is less which is essential for advancing the understanding of its hydrodynamics and for validation computational fluid dynamics (CFD). Therefore, this work focused on developing a new, non-invasive, statistically reliable technique that can be used to measure local liquid velocity (VLL) in two-dimensions (2-D). This is performed by combining Digital Industrial X-ray Radiography (DIR) and Particle Tracking Velocimetry (PTV) techniques. This work also make possible the development of three-dimensional (3-D) VLL measurements that can be taken in TBRs. Measurements taken through both the combined and the novel technique, once validated, were found to be comparable to another technique (a two-point fiber optical probe) currently being developed at Missouri University of Science and Technology. The results from this study indicate that, for a gas-liquid-solid type bed, the measured VLL can have a maximum range that is between 35 and 51 times that of its superficial liquid velocity (VSL). Without the existence of gas, the measured VLL can have a maximum range that is between 4 and 4.7 times that of its VSL. At a higher V SL, the particle tracer was greatly distributed and became carried away by a high liquid flow rate. Neither the variance nor the range of measured VLL varied for any of the replications, confirming the reproducibility of the experimental measurements used, regardless of the VSL . The liquid's movement inside the pore was consistent with findings from previous studies that used various techniques.

Local Measurement of Fuel Energy Deposition and Heat Transfer Environment During Fuel Lifetime Using Controlled Calorimetry

International Nuclear Information System (INIS)

Don W. Miller; Andrew Kauffmann; Eric Kreidler; Dongxu Li; Hanying Liu; Daniel Mills; Thomas D. Radcliff; Joseph Talnagi

2001-01-01

A comprehensive description of the accomplishments of the DOE grant titled, ''Local Measurement of Fuel Energy Deposition and Heat Transfer Environment During Fuel Lifetime using Controlled Calorimetry''

Does undertaking an intercalated BSc influence first clinical year exam results at a London medical school?

Directory of Open Access Journals (Sweden)

Jones Melvyn

2011-02-01

Full Text Available Abstract Background Intercalated BScs (iBScs are an optional part of the medical school curriculum in many Universities. Does undertaking an iBSc influence subsequent student performance? Previous studies addressing this question have been flawed by iBSc students being highly selected. This study looks at data from medical students where there is a compulsory iBSc for non-graduates. Our aim was to see whether there was any difference in performance between students who took an iBSc before or after their third year (first clinical year exams. Methods A multivariable analysis was performed to compare the third year results of students at one London medical school who had or had not completed their iBSc by the start of this year (n = 276. A general linear model was applied to adjust for differences between the two groups in terms of potential confounders (age, sex, nationality and baseline performance. Results The results of third year summative exams for 276 students were analysed (184 students with an iBSc and 92 without. Unadjusted analysis showed students who took an iBSc before their third year achieved significantly higher end of year marks than those who did not with a mean score difference of 4.4 (0.9 to 7.9 95% CI, p = 0.01. (overall mean score 238.4 "completed iBSc" students versus 234.0 "not completed", range 145.2 - 272.3 out of 300. There was however a significant difference between the two groups in their prior second year exam marks with those choosing to intercalate before their third year having higher marks. Adjusting for this, the difference in overall exam scores was no longer significant with a mean score difference of 1.4 (-4.9 to +7.7 95% CI, p = 0.66. (overall mean score 238.0 " completed iBSc" students versus 236.5 "not completed". Conclusions Once possible confounders are controlled for (age, sex, previous academic performance undertaking an iBSc does not influence third year exam results. One explanation for this

Laser-Induced, Local Oxidation of Copper Nanoparticle Films During Raman Measurements

Science.gov (United States)

Hight Walker, Angela R.; Cheng, Guangjun; Calizo, Irene

2011-03-01

The optical properties of gold and silver nanoparticles and their films have been thoroughly investigated as surface enhanced Raman scattering (SERS) substrates and chemical reaction promoters. Similar to gold and silver nanoparticles, copper nanoparticles exhibit distinct plasmon absorptions in the visible region. The work on copper nanoparticles and their films is limited due to their oxidization in air. However, their high reactivity actually provides an opportunity to exploit the laser-induced thermal effect and chemical reactions of these nanoparticles. Here, we present our investigation of the local oxidation of a copper nanoparticle film induced by a visible laser source during Raman spectroscopic measurements. The copper nanoparticle film is prepared by drop-casting chemically synthesized copper colloid onto silicon oxide/silicon substrate. The local oxidation induced by visible lasers in Raman spectroscopy is monitored with the distinct scattering peaks for copper oxides. Optical microscopy and scanning electron microscopy have been used to characterize the laser-induced morphological changes in the film. The results of this oxidation process with different excitation wavelengths and different laser powers will be presented.

Measurement of local, internal magnetic fluctuations via cross-polarization scattering in the DIII-D tokamak (invited)

Energy Technology Data Exchange (ETDEWEB)

Barada, K., E-mail: kshitish@ucla.edu; Rhodes, T. L.; Crocker, N. A.; Peebles, W. A. [University of California-Los Angeles, P.O. Box 957099, Los Angeles, California 90095 (United States)

2016-11-15

We present new measurements of internal magnetic fluctuations obtained with a novel eight channel cross polarization scattering (CPS) system installed on the DIII-D tokamak. Measurements of internal, localized magnetic fluctuations provide a window on an important physics quantity that we heretofore have had little information on. Importantly, these measurements provide a new ability to challenge and test linear and nonlinear simulations and basic theory. The CPS method, based upon the scattering of an incident microwave beam into the opposite polarization by magnetic fluctuations, has been significantly extended and improved over the method as originally developed on the Tore Supra tokamak. A new scattering geometry, provided by a unique probe beam, is utilized to improve the spatial localization and wavenumber range. Remotely controllable polarizer and mirror angles allow polarization matching and wavenumber selection for a range of plasma conditions. The quasi-optical system design, its advantages and challenges, as well as important physics validation tests are presented and discussed. Effect of plasma beta (ratio of kinetic to magnetic pressure) on both density and magnetic fluctuations is studied and it is observed that internal magnetic fluctuations increase with beta. During certain quiescent high confinement operational regimes, coherent low frequency modes not detected by magnetic probes are detected locally by CPS diagnostics.

Cyclone, Salinity Intrusion and Adaptation and Coping Measures in Coastal Bangladesh

Directory of Open Access Journals (Sweden)

Sebak Kumar Saha

2017-06-01

Full Text Available Although households in the coastal areas of Bangladesh undertake various adaptation and coping measures to minimise their vulnerability to cyclone hazards and salinity intrusion, these autonomous measures have received little attention in the past. However, the Government of Bangladesh has recently emphasised the importance of understanding these measures so that necessary interventions to make households more resilient to natural hazards and the adverse impacts of climate change can be introduced. This paper, based on secondary sources, explores adaptation and coping measures that households in the coastal areas of Bangladesh undertake to minimise their vulnerability to cyclone hazards and salinity intrusion. This paper shows that many of the adaptation and coping measures contribute to making households less vulnerable and more resilient to cyclone hazards and salinity intrusion, although some coping measures do the opposite as they reduce households’ adaptive capacities instead of improving them. This paper argues that the adaptation and coping measures that contribute to reducing households’ vulnerability to natural hazards need to be supported and guided by the government and NGOs to make them more effective. Additionally, measures that make households more vulnerable also need to be addressed by the government and NGOs, as most of these measures are related to and constrained by both poverty, and because the households have little or no access to economic opportunities.

Measuring agreement between decision support reminders: the cloud vs. the local expert

OpenAIRE

Dixon, Brian Edward; Simonaitis, Linas; Perkins, Susan M; Wright, Adam; Middleton, Blackford

2014-01-01

Background: A cloud-based clinical decision support system (CDSS) was implemented to remotely provide evidence-based guideline reminders in support of preventative health. Following implementation, we measured the agreement between preventive care reminders generated by an existing, local CDSS and the new, cloud-based CDSS operating on the same patient visit data. Methods: Electronic health record data for the same set of patients seen in primary care were sent to both the cloud-based web ser...

Measurement of local heat transfer coefficient during gas–liquid Taylor bubble train flow by infra-red thermography

International Nuclear Information System (INIS)

Mehta, Balkrishna; Khandekar, Sameer

2014-01-01

Highlights: • Infra-red thermographic study of Taylor bubble train flow in square mini-channel. • Design of experiments for measurement of local streamwise Nusselt number. • Minimizing conjugate heat transfer effects and resulting errors in data reduction. • Benchmarking against single-phase flow and three-dimensional computations. • Local heat transfer enhancement up to two times due to Taylor bubble train flow. -- Abstract: In mini/micro confined internal flow systems, Taylor bubble train flow takes place within specific range of respective volume flow ratios, wherein the liquid slugs get separated by elongated Taylor bubbles, resulting in an intermittent flow situation. This unique flow characteristic requires understanding of transport phenomena on global, as well as on local spatio-temporal scales. In this context, an experimental design methodology and its validation are presented in this work, with an aim of measuring the local heat transfer coefficient by employing high-resolution InfraRed Thermography. The effect of conjugate heat transfer on the true estimate of local transport coefficients, and subsequent data reduction technique, is discerned. Local heat transfer coefficient for (i) hydrodynamically fully developed and thermally developing single-phase flow in three-side heated channel and, (ii) non-boiling, air–water Taylor bubble train flow is measured and compared in a mini-channel of square cross-section (5 mm × 5 mm; D h = 5 mm, Bo ≈ 3.4) machined on a stainless steel substrate (300 mm × 25 mm × 11 mm). The design of the setup ensures near uniform heat flux condition at the solid–fluid interface; the conjugate effects arising from the axial back conduction in the substrate are thus minimized. For benchmarking, the data from single-phase flow is also compared with three-dimensional computational simulations. Depending on the employed volume flow ratio, it is concluded that enhancement of nearly 1.2–2.0 times in time

Detecting a set of entanglement measures in an unknown tripartite quantum state by local operations and classical communication

International Nuclear Information System (INIS)

Bai Yankui; Li Shushen; Zheng Houzhi; Wang, Z. D.

2006-01-01

We propose a more general method for detecting a set of entanglement measures, i.e., negativities, in an arbitrary tripartite quantum state by local operations and classical communication. To accomplish the detection task using this method, three observers do not need to perform partial transposition maps by the structural physical approximation; instead, they only need to collectively measure some functions via three local networks supplemented by a classical communication. With these functions, they are able to determine the set of negativities related to the tripartite quantum state

Ministerial Decree of 15 February 1974 establishing the inventory of qualified experts and physicians authorized to undertake the health physics and medical supervision of protection against ionizing radiations

International Nuclear Information System (INIS)

1974-01-01

This Decree was made in implementation of DPR No. 185 of 13 February 1964 and provides for the legal and administrative acknowledgment of experts and physicians who are required to undertake supervision of protection against the hazards of ionizing radiations. (NEA) [fr

Factors associated with quality of life in elderly undertaking literacy programs

Directory of Open Access Journals (Sweden)

Bruna Rodrigues dos Santos

Full Text Available ABSTRACT Increased life expectancy has led to a significant number of elderly enrolling on Youth and Adult Education programs (YAE. These individuals leave inactivity and negative aspects of aging in search of opportunities for social inclusion. Objective: To evaluate the influence of sociodemographic factors and depressive and cognitive symptoms on quality of life (QL of elderly attending the YAE of São Carlos city in São Paulo state. Methods: A descriptive and quantitative study approved by the Research Ethics Committee of São Carlos Federal University was conducted. The sample comprised all elderly undertaking the YAE literacy program in 2012. The instruments used were the Mini-Mental State Examination (MMSE, Geriatric Depression Scale (GDS, WHOQOL-bref and WHOQOL-old, and a sociodemographic instrument. Results: We interviewed 23 elderly, predominantly females (91.3% in the early stages of old age (69.6%. The number of years of YAE study showed no correlation with cognition scores obtained on the MMSE or with QL domains. However, scores on the GDS had a moderate inverse relationship with total scores for the Physical (p<0.01, Sensory Functioning (p<0.05, Independence (p<0.01, Past, Present and Future Activities (p<0.05, Social Participation (p<0.01, and Intimacy (p<0.05 QV domains, and a strong inversely proportional relationship with the Social Relationships QV domain (p<0.01. Scores attained on the MMSE showed a moderate and direct relationship with total scores on the Independence QL domain (p=0.001. Conclusion: Elderly on literacy programs have average quality of life scores. Several QL domains are influenced by depression and cognitive symptoms.

Long-term adherence to a local guideline on postoperative body temperature measurement: mixed methods analysis

NARCIS (Netherlands)

Storm-Versloot, Marja N.; Knops, Anouk M.; Ubbink, Dirk T.; Goossens, Astrid; Legemate, Dink A.; Vermeulen, Hester

2012-01-01

Aim To find out whether a successful multifaceted implementation approach of a local evidence-based guideline on postoperative body temperature measurements (BTM) was persistent over time, and which factors influenced long-term adherence. Methods Mixed methods analysis. Patient records were

Local, atomic-level elastic strain measurements of metallic glass thin films by electron diffraction

Energy Technology Data Exchange (ETDEWEB)

Ebner, C. [Physics of Nanostructured Materials, Faculty of Physics, University of Vienna, Boltzmanngasse 5, 1090 Vienna (Austria); Sarkar, R. [Department of Materials Science and Engineering, School for Engineering of Matter Transport and Energy, Arizona State University, Tempe 85287 (United States); Rajagopalan, J. [Department of Materials Science and Engineering, School for Engineering of Matter Transport and Energy, Arizona State University, Tempe 85287 (United States); Department of Mechanical and Aerospace Engineering, School for Engineering of Matter Transport and Energy, Arizona State University, Tempe 85287 (United States); Rentenberger, C., E-mail: christian.rentenberger@univie.ac.at [Physics of Nanostructured Materials, Faculty of Physics, University of Vienna, Boltzmanngasse 5, 1090 Vienna (Austria)

2016-06-15

A novel technique is used to measure the atomic-level elastic strain tensor of amorphous materials by tracking geometric changes of the first diffuse ring of selected area electron diffraction patterns (SAD). An automatic procedure, which includes locating the centre and fitting an ellipse to the diffuse ring with sub-pixel precision is developed for extracting the 2-dimensional strain tensor from the SAD patterns. Using this technique, atomic-level principal strains from micrometre-sized regions of freestanding amorphous Ti{sub 0.45}Al{sub 0.55} thin films were measured during in-situ TEM tensile deformation. The thin films were deformed using MEMS based testing stages that allow simultaneous measurement of the macroscopic stress and strain. The calculated atomic-level principal strains show a linear dependence on the applied stress, and good correspondence with the measured macroscopic strains. The calculated Poisson’s ratio of 0.23 is reasonable for brittle metallic glasses. The technique yields a strain accuracy of about 1×10{sup −4} and shows the potential to obtain localized strain profiles/maps of amorphous thin film samples. - Highlights: • A TEM method to measure elastic strain in metallic glass films is proposed. • Method is based on tracking geometric changes in TEM diffraction patterns. • An automatic procedure is developed for extracting the local strain tensor. • Atomic-level strain in amorphous TiAl film was analysed during in-situ deformation. • Capability of the method to obtain micrometer scale strain profiles/maps is shown.

Locking the local oscillator phase to the atomic phase via weak measurement

International Nuclear Information System (INIS)

Shiga, N; Takeuchi, M

2012-01-01

A new method is proposed to reduce the frequency noise of a local oscillator to the level of white phase noise by maintaining (not destroying by projective measurement) the coherence of the ensemble pseudo-spin of atoms over many measurement cycles. This method, which we call ‘atomic phase lock (APL)’, uses weak measurement to monitor the phase in the Ramsey method and repeat the cycle without initialization of the phase. APL will achieve white phase noise as long as the noise accumulated during dead time and the decoherence are smaller than the measurement noise. A numerical simulation confirmed that with APL, the Allan deviation is averaged down at a maximum rate that is proportional to the inverse of the total measurement time, τ -1 . In contrast, current atomic clocks that use projection measurement suppress the noise only to the white frequency noise level, in which case the Allan deviation scales as τ -1/2 . Faraday rotation is one way to achieve weak measurement for APL. The strength of Faraday rotation with 171 Yb + ions trapped in a linear rf-trap is evaluated, and the performance of APL is discussed. The main source of decoherence is a spontaneous emission, induced by the probe beam for Faraday rotation measurement. The Faraday rotation measurement can be repeated until the decoherence becomes comparable to the signal-to-noise ratio of the measurement. The number of cycles for a realistic experimental parameter is estimated to be ∼100. (paper)

Optimized probes for dose rate measurements at local government sites and in emergency planning zones and their integration into measurement networks

International Nuclear Information System (INIS)

Kuca, Petr; Helebrant, Jan; Cespirova, Irena; Judas, Libor; Skala, Lukas

2015-01-01

The results of a security project aimed at the development of a radiation situation monitoring system using optimized probes for dose rate measurements are described. The system is suitable for use at local government sites as well as at other sites. The system includes dose rate measurement probes with the variable configuration functionality (detection part), equipment for data transfer to a central workplace (communication part) and application for collection, storage and administration of the results and their presentation at a website (presentation part). The dosimetric and other operational properties of the probes were tested and the feasibility of their integration into measurement networks using the IMS central application was examined. (orig.)

Local Government Implementation of Long-Term Stewardship at Two DOE Facilities

Energy Technology Data Exchange (ETDEWEB)

John Pendergrass; Roman Czebiniak; Kelly Mott; Seth Kirshenberg; Audrey Eidelman; Zachary Lamb; Erica Pencak; Wendy Sandoz

2003-08-13

The Department of Energy (DOE) is responsible for cleaning up the radioactive and chemical contamination that resulted from the production of nuclear weapons. At more than one hundred sites throughout the country DOE will leave some contamination in place after the cleanup is complete. In order to protect human health and the environment from the remaining contamination DOE, U.S. Environmental Protection Agency (EPA), state environmental regulatory agencies, local governments, citizens and other entities will need to undertake long-term stewardship of such sites. Long-term stewardship includes a wide range of actions needed to protect human health in the environment for as long as the risk from the contamination remains above acceptable levels, such as barriers, caps, and other engineering controls and land use controls, signs, notices, records, and other institutional controls. In this report the Environmental Law Institute (ELI) and the Energy Communities Alliance (ECA) examine how local governments, state environmental agencies, and real property professionals implement long-term stewardship at two DOE facilities, Losa Alamos National Laboratory and Oak Ridge Reservation.

Measurement of local void fraction at elevated temperature and pressure

International Nuclear Information System (INIS)

Duncan, D.; Trabold, T.A.

1993-03-01

Significant advances have recently been made in analytical and computational methods for the prediction of local thermal-hydraulic conditions in gas/liquid two-phase flows. There is, however, a need for extensive experimental data, for the dual purposes of constitutive relation development and code qualification. There is especially true of systems involving complicated geometries and/or extreme flow conditions for which little, if any, applicable information exists in the open literature. For the tests described in the present paper, a novel electrical probe has been applied to measure the void fraction in atmospheric pressure air/water flows, and steam/water mixtures at high temperature and pressure. The data acquired in the latter experiments are compared with the results of a one-dimensional two-fluid computational analysis

Magnetic vortex chirality determination via local hysteresis loops measurements with magnetic force microscopy

Science.gov (United States)

Coïsson, Marco; Barrera, Gabriele; Celegato, Federica; Manzin, Alessandra; Vinai, Franco; Tiberto, Paola

2016-01-01

Magnetic vortex chirality in patterned square dots has been investigated by means of a field-dependent magnetic force microscopy technique that allows to measure local hysteresis loops. The chirality affects the two loop branches independently, giving rise to curves that have different shapes and symmetries as a function of the details of the magnetisation reversal process in the square dot, that is studied both experimentally and through micromagnetic simulations. The tip-sample interaction is taken into account numerically, and exploited experimentally, to influence the side of the square where nucleation of the vortex preferably occurs, therefore providing a way to both measure and drive chirality with the present technique. PMID:27426442

Jet joint undertaking. Annual report 1987

International Nuclear Information System (INIS)

1988-07-01

The first part of the Report starts with this section which includes a brief general introduction, provides an overview of the planning of the Report and sets the background to the Project. This is followed by a section on JET and the Euratom and International Fusion Programmes which summarises the main features of the JET apparatus and its experimental programme and explains the position of the Project in the overall Euratom programme. In addition, it explains how JET relates to other large fusion devices throughout the world and holds a pre-eminent position in fusion research. The next section reports on the technical status of the machine. This is followed by a section on the results of JET operations in 1987 which sets out the various operating conditions in terms of ohmic heating, radio-frequency (RF) heating, neutral beam (NB) heating and various combined scenarios in different magnetic field configurations; The overall global and local behaviour observed; and the progress towards breakeven situations. This section concludes with a discussion of future scientific prospects

Analysis of the effect of mobile phone base station antenna loading on localized SAR and its consequences for measurements.

Science.gov (United States)

Hansson, Björn; Thors, Björn; Törnevik, Christer

2011-12-01

In this work, the effect of antenna element loading on the localized specific absorption rate (SAR) has been analyzed for base station antennas. The analysis was conducted in order to determine whether localized SAR measurements of large multi-element base station antennas can be conducted using standardized procedures and commercially available equipment. More specifically, it was investigated if the antenna shifting measurement procedure, specified in the European base station exposure assessment standard EN 50383, will produce accurate localized SAR results for base station antennas larger than the specified measurement phantom. The obtained results show that SAR accuracy is affected by the presence of lossy material within distances of one wavelength from the tested antennas as a consequence of coupling and redistribution of transmitted power among the antenna elements. It was also found that the existing standardized phantom is not optimal for SAR measurements of large base station antennas. A new methodology is instead proposed based on a larger, box-shaped, whole-body phantom. Copyright © 2011 Wiley Periodicals, Inc.

Measurements of local liquid velocity and interfacial parameters of air-water bubbly flows in a horizontal tube

International Nuclear Information System (INIS)

Yang Jian; Zhang Mingyuan; Zhang Chaojie; Su Yuliang

2002-01-01

Distribution of local kinematic parameters of air-water bubbly flows in a horizontal tube with an ID of 35 mm was investigated. The local liquid velocity was measured with a cylindrical hot film probe, and local void fraction, bubble frequency and bubble velocity were measured with a double-sensor probe. It was found that the axial liquid velocity has a same profile as that of single liquid phase flow in the lower part of the tube, and it suffers a sudden reduction in the upper part of the tube. With increasing airflow rate, the liquid velocity would increase in the lower part of the tube, and further decrease at the upper part of the tube, respectively. Most bubbles are congested at the upper part of the tube, and the void fraction and bubble frequencies have similar profile and both are asymmetrical with the tube axis with their maximum values located near the upper tube wall

A study of x-ray microbeam stress measurement for local area

International Nuclear Information System (INIS)

Natsume, Yoshitaka; Miyakawa, Susumu

1987-01-01

A new type X-ray microbeam equipment which is capable of three-dimensional oscillation at an X-ray radiation position was used to measure the residual stress of pure iron powder and bending plate specimens as well as that in the vicinity of fatigue crack tip of 1/2 CT specimen. The results obtained are summerized as follows. (1) Diffraction profiles of pure iron powder with diameter 0.02 ∼ 0.03 μm particle size obtained by the present microbeam technique in the beam area of 80 μm in diamether and measuring time more than 800 sec showed Kα 1 and Kα 2 peaks clearly, so that these profiles are good enough for stress measurement. (2) The measured stress of pure iron powder with diameter 10 ∼ 25 μm particle size in the beam area of 80 μm in diameter was not equal to 0 MPa. The measured stress varied greatly and was independent of measuring time. (3) The measured stress of pure iron powder with diameter 0.02 ∼ 0.03 μm particle size in the beam area of 80 μm in diameter was almost 1 MPa, which shows the good accuracy of this X-ray micro-beam equipment. (4) The relation between the X-ray measured stress and the mechanically applied stress showed good agreement. (5) The distribution of residual stress at the vicinity of fatigue crack tip showed that the residual stress at the fatigue crack tip was compression and the residual stress in front of crack tip was tension. This tensile residual stress in front of crack tip existed in the area from 0.02 mm to 2 mm. (6) The above results show that the present equipment is advantageous in the investigation of local stress, shortening the measuring time without sacrificing the accuracy. (author)

Obstacles to researching the researchers: a case study of the ethical challenges of undertaking methodological research investigating the reporting of randomised controlled trials.

Science.gov (United States)

McKenzie, Joanne E; Herbison, G Peter; Roth, Paul; Paul, Charlotte

2010-03-21

Recent cohort studies of randomised controlled trials have provided evidence of within-study selective reporting bias; where statistically significant outcomes are more likely to be more completely reported compared to non-significant outcomes. Bias resulting from selective reporting can impact on meta-analyses, influencing the conclusions of systematic reviews, and in turn, evidence based clinical practice guidelines.In 2006 we received funding to investigate if there was evidence of within-study selective reporting in a cohort of RCTs submitted to New Zealand Regional Ethics Committees in 1998/99. This research involved accessing ethics applications, their amendments and annual reports, and comparing these with corresponding publications. We did not plan to obtain informed consent from trialists to view their ethics applications for practical and scientific reasons. In November 2006 we sought ethical approval to undertake the research from our institutional ethics committee. The Committee declined our application on the grounds that we were not obtaining informed consent from the trialists to view their ethics application. This initiated a seventeen month process to obtain ethical approval. This publication outlines what we planned to do, the issues we encountered, discusses the legal and ethical issues, and presents some potential solutions. Methodological research such as this has the potential for public benefit and there is little or no harm for the participants (trialists) in undertaking it. Further, in New Zealand, there is freedom of information legislation, which in this circumstance, unambiguously provided rights of access and use of the information in the ethics applications. The decision of our institutional ethics committee defeated this right and did not recognise the nature of this observational research. Methodological research, such as this, can be used to develop processes to improve quality in research reporting. Recognition of the potential

MEASURING PLACE ATTACHMENT TO CĂLIMANI NATIONAL PARK (ROMANIA AMONG LOCAL RESIDENTS AND TOURISTS. PRELIMINARY FINDINGS

Directory of Open Access Journals (Sweden)

IZABELA AMALIA MIHALCA

2014-06-01

Full Text Available Measuring Place Attachment to Călimani National Park (Romania among Local Residents and Tourists. Preliminary Findings. Understanding the attachments that people develop for certain places is an interesting area of study, but with little attention in Romanian empirical research. This study introduces the concepts of place identity and place dependence in relation to a specific area within the local culture of the Land of Dorna. Starting from previous studies carried on western samples, a research instrument measuring the degree and content of place attachment was translated and adapted. 86 respondents (52 residents and 34 tourists filled in the questionnaire. Comparing the degree of attachment, there was no significant difference among the two samples. However, local residents tended to display higher levels of place identity, while tourists displayed more emotional functionality to the study area. Place attachment is deeply embodied in the local culture. Due to the research design the generalization of the results is limited. However, this study may act as a starting point in researching other geographical mental spaces. The lands of Romania are unique social and cultural spaces with specific attachment patterns. Future studies should consider larger and representative samples in order to find additional patterns of attachment among residents and other individuals (e.g. tourists, visitors, new residents, other communities etc..

Nonperturbative measurement of the local magnetic field using pulsed polarimetry for fusion reactor conditions (invited).

Science.gov (United States)

Smith, Roger J

2008-10-01

A novel diagnostic technique for the remote and nonperturbative sensing of the local magnetic field in reactor relevant plasmas is presented. Pulsed polarimetry [Patent No. 12/150,169 (pending)] combines optical scattering with the Faraday effect. The polarimetric light detection and ranging (LIDAR)-like diagnostic has the potential to be a local B(pol) diagnostic on ITER and can achieve spatial resolutions of millimeters on high energy density (HED) plasmas using existing lasers. The pulsed polarimetry method is based on nonlocal measurements and subtle effects are introduced that are not present in either cw polarimetry or Thomson scattering LIDAR. Important features include the capability of simultaneously measuring local T(e), n(e), and B(parallel) along the line of sight, a resiliency to refractive effects, a short measurement duration providing near instantaneous data in time, and location for real-time feedback and control of magnetohydrodynamic (MHD) instabilities and the realization of a widely applicable internal magnetic field diagnostic for the magnetic fusion energy program. The technique improves for higher n(e)B(parallel) product and higher n(e) and is well suited for diagnosing the transient plasmas in the HED program. Larger devices such as ITER and DEMO are also better suited to the technique, allowing longer pulse lengths and thereby relaxing key technology constraints making pulsed polarimetry a valuable asset for next step devices. The pulsed polarimetry technique is clarified by way of illustration on the ITER tokamak and plasmas within the magnetized target fusion program within present technological means.

Nonperturbative measurement of the local magnetic field using pulsed polarimetry for fusion reactor conditions (invited)

International Nuclear Information System (INIS)

Smith, Roger J.

2008-01-01

A novel diagnostic technique for the remote and nonperturbative sensing of the local magnetic field in reactor relevant plasmas is presented. Pulsed polarimetry [Patent No. 12/150,169 (pending)] combines optical scattering with the Faraday effect. The polarimetric light detection and ranging (LIDAR)-like diagnostic has the potential to be a local B pol diagnostic on ITER and can achieve spatial resolutions of millimeters on high energy density (HED) plasmas using existing lasers. The pulsed polarimetry method is based on nonlocal measurements and subtle effects are introduced that are not present in either cw polarimetry or Thomson scattering LIDAR. Important features include the capability of simultaneously measuring local T e , n e , and B || along the line of sight, a resiliency to refractive effects, a short measurement duration providing near instantaneous data in time, and location for real-time feedback and control of magnetohydrodynamic (MHD) instabilities and the realization of a widely applicable internal magnetic field diagnostic for the magnetic fusion energy program. The technique improves for higher n e B || product and higher n e and is well suited for diagnosing the transient plasmas in the HED program. Larger devices such as ITER and DEMO are also better suited to the technique, allowing longer pulse lengths and thereby relaxing key technology constraints making pulsed polarimetry a valuable asset for next step devices. The pulsed polarimetry technique is clarified by way of illustration on the ITER tokamak and plasmas within the magnetized target fusion program within present technological means.

Measure solutions for non-local interaction PDEs with two species

Energy Technology Data Exchange (ETDEWEB)

Francesco, Marco Di [Department of Mathematical and Statistical Sciences, University of Bath, Claverton Down, Bath, BA2 7AY (United Kingdom); Fagioli, Simone [DISIM—Department of Information Engineering, Computer Science and Mathematics, University of L' Aquila, Via Vetoio 1 (Coppito) 67100 L' Aquila (AQ) (Italy)

2013-10-01

This paper presents a systematic existence and uniqueness theory of weak measure solutions for systems of non-local interaction PDEs with two species, which are the PDE counterpart of systems of deterministic interacting particles with two species. The main motivations behind those models arise in cell biology, pedestrian movements, and opinion formation. In case of symmetrizable systems (i.e. with cross-interaction potentials one multiple of the other), we provide a complete existence and uniqueness theory within (a suitable generalization of) the Wasserstein gradient flow theory in Ambrosio et al (2008 Gradient Flows in Metric Spaces and in the Space of Probability Measures (Lectures in Mathematics ETH Zürich) 2nd edn (Basel: Birkhäuser)) and Carrillo et al (2011 Duke Math. J. 156 229–71), which allows the consideration of interaction potentials with a discontinuous gradient at the origin. In the general case of non-symmetrizable systems, we provide an existence result for measure solutions which uses a semi-implicit version of the Jordan–Kinderlehrer–Otto (JKO) scheme (Jordan et al 1998 SIAM J. Math. Anal. 29 1–17), which holds in a reasonable non-smooth setting for the interaction potentials. Uniqueness in the non-symmetrizable case is proven for C{sup 2} potentials using a variant of the method of characteristics. (paper)

Measure solutions for non-local interaction PDEs with two species

International Nuclear Information System (INIS)

Francesco, Marco Di; Fagioli, Simone

2013-01-01

This paper presents a systematic existence and uniqueness theory of weak measure solutions for systems of non-local interaction PDEs with two species, which are the PDE counterpart of systems of deterministic interacting particles with two species. The main motivations behind those models arise in cell biology, pedestrian movements, and opinion formation. In case of symmetrizable systems (i.e. with cross-interaction potentials one multiple of the other), we provide a complete existence and uniqueness theory within (a suitable generalization of) the Wasserstein gradient flow theory in Ambrosio et al (2008 Gradient Flows in Metric Spaces and in the Space of Probability Measures (Lectures in Mathematics ETH Zürich) 2nd edn (Basel: Birkhäuser)) and Carrillo et al (2011 Duke Math. J. 156 229–71), which allows the consideration of interaction potentials with a discontinuous gradient at the origin. In the general case of non-symmetrizable systems, we provide an existence result for measure solutions which uses a semi-implicit version of the Jordan–Kinderlehrer–Otto (JKO) scheme (Jordan et al 1998 SIAM J. Math. Anal. 29 1–17), which holds in a reasonable non-smooth setting for the interaction potentials. Uniqueness in the non-symmetrizable case is proven for C 2 potentials using a variant of the method of characteristics. (paper)

Quantum non-locality vs. quasi-local measurements in the conditions of the Aharonov-Bohm effect

International Nuclear Information System (INIS)

Gulian, Armen M

2014-01-01

Theoretical explanation of the Meissner effect involves proportionality between current density and vector potential, which has many deep consequences. As noticed by de Gennes, superconductors in a magnetic field 'find an equilibrium state where the sum of kinetic and magnetic energies is minimum' and this state 'corresponds to the expulsion of the magnetic field'. This statement still leaves an open question: from which source is the superconducting current acquiring its kinetic energy? A naïve answer, perhaps, is from the energy of the magnetic field. However, one can consider situations (Aharonov-Bohm effect), where the classical magnetic field is locally absent in the area occupied by the current. Experiments demonstrate that despite the local absence of the magnetic field, current is, nevertheless, building up. From what source is it acquiring its energy then? Locally, only a vector potential is present. How does the vector potential facilitate the formation of the current? Is the current formation a result of a truly non-local quantum action, or does the local action of the vector potential have experimental consequences? We discuss possible experiments with a hybrid normal-metal superconductor circuitry, which can clarify this puzzling situation. Experimental answers will be important for further developments.

The active titration method for measuring local hydroxyl radical concentration

Science.gov (United States)

Sprengnether, Michele; Prinn, Ronald G.

1994-01-01

We are developing a method for measuring ambient OH by monitoring its rate of reaction with a chemical species. Our technique involves the local, instantaneous release of a mixture of saturated cyclic hydrocarbons (titrants) and perfluorocarbons (dispersants). These species must not normally be present in ambient air above the part per trillion concentration. We then track the mixture downwind using a real-time portable ECD tracer instrument. We collect air samples in canisters every few minutes for roughly one hour. We then return to the laboratory and analyze our air samples to determine the ratios of the titrant to dispersant concentrations. The trends in these ratios give us the ambient OH concentration from the relation: dlnR/dt = -k(OH). A successful measurement of OH requires that the trends in these ratios be measureable. We must not perturb ambient OH concentrations. The titrant to dispersant ratio must be spatially invariant. Finally, heterogeneous reactions of our titrant and dispersant species must be negligible relative to the titrant reaction with OH. We have conducted laboratory studies of our ability to measure the titrant to dispersant ratios as a function of concentration down to the few part per trillion concentration. We have subsequently used these results in a gaussian puff model to estimate our expected uncertainty in a field measurement of OH. Our results indicate that under a range of atmospheric conditions we expect to be able to measure OH with a sensitivity of 3x10(exp 5) cm(exp -3). In our most optimistic scenarios, we obtain a sensitivity of 1x10(exp 5) cm(exp -3). These sensitivity values reflect our anticipated ability to measure the ratio trends. However, because we are also using a rate constant to obtain our (OH) from this ratio trend, our accuracy cannot be better than that of the rate constant, which we expect to be about 20 percent.

Photoelectrical measurements of the local value of the contact potential difference in the metal-insulator semiconductor (MIS) structures

Energy Technology Data Exchange (ETDEWEB)

Kudla, A.; Przewlocki, H.M.; Borowicz, L.; Brzezinska, D.; Rzodkiewicz, W

2004-02-22

In this work the local values of contact potential difference (CPD) and their distributions in the plane of the metal-insulator-semiconductor (MIS) structure's gate have been determined for the first time. This has been achieved by application of a focused beam of UV radiation from a laser source. The less than 20-{mu}m diameter of UV radiation beam allows determination of distributions of local CPD values in the plane of the gate. The CPD distribution is such that its values are highest far away from the gate edge regions, lower in the vicinity of gate edges and still lower in the vicinity of gate corners. In this paper the method and the optical setup used to determine local values of CPD are described and example measurement results are given. The CPD distributions obtained have been confirmed by a series of independent measurements by other methods. It is believed that the CPD distributions obtained (as well as distributions of local values of other parameters) are due to the mechanical stress distributions under the gate of a MIS system.

Determinants and impediments of whistle-blowing in local government councils: A case study of the South-East District Council, Botswana

Directory of Open Access Journals (Sweden)

Abiodun M.T. Omotoye

2017-11-01

Full Text Available This article investigates the perceptions of public service employees regarding the role of whistle-blowing in local government. Whistle-blowing has received increased attention and support as a means of detecting and correcting wrongdoing in organisations. Yet, as this case study discusses, the absence of whistle-blower protection measures and fear of reprisal and job loss deter potential witnesses from reporting wrongdoing in the workplace. A mixed research method approach was employed to undertake the study. A self-administered questionnaire was distributed to public servants employed within the South-East District Council (SEDC and literature related to corruption and whistle-blowing was reviewed. The findings indicate that public service employees strongly support the role whistle-blowing has to play in curbing corruption in the workplace, particularly if the corrupt activity could potentially threaten people’s lives and suppress social justice. However, the absence of whistle-blower protection measures was cited as the most significant impediment to reporting wrongdoing. The article proposes the need for the SEDC to adopt effective policies and procedures that place a strong emphasis on providing protection for employees to disclose misconduct and fraudulent conduct.

Measurement of subcooled boiling pressure drop and local heat transfer coefficient in horizontal tube under LPLF conditions

International Nuclear Information System (INIS)

Baburajan, P.K.; Bisht, G.S.; Gupta, S.K.; Prabhu, S.V.

2013-01-01

Highlights: ► Measured subcooled boiling pressure drop and local heat transfer coefficient in horizontal tubes. ► Infra-red thermal imaging is used for wall temperature measurement. ► Developed correlations for pressure drop and local heat transfer coefficient. -- Abstract: Horizontal flow is commonly encountered in boiler tubes, refrigerating equipments and nuclear reactor fuel channels of pressurized heavy water reactors (PHWR). Study of horizontal flow under low pressure and low flow (LPLF) conditions is important in understanding the nuclear core behavior during situations like LOCA (loss of coolant accidents). In the present work, local heat transfer coefficient and pressure drop are measured in a horizontal tube under LPLF conditions of subcooled boiling. Geometrical parameters covered in this study are diameter (5.5 mm, 7.5 mm and 9.5 mm) and length (550 mm, 750 mm and 1000 mm). The operating parameters varied are mass flux (450–935 kg/m 2 s) and inlet subcooling (29 °C, 50 °C and 70 °C). Infra-red thermography is used for the measurement of local wall temperature to estimate the heat transfer coefficient in single phase and two phase flows with water as the working medium at atmospheric pressure. Correlation for single phase diabatic pressure drop ratio (diabatic to adiabatic) as a function of viscosity ratio (wall temperature to fluid temperature) is presented. Correlation for pressure drop under subcooled boiling conditions as a function of Boiling number (Bo) and Jakob number (Ja) is obtained. Correlation for single phase heat transfer coefficient in the thermal developing region is presented as a function of Reynolds number (Re), Prandtl number (Pr) and z/d (ratio of axial length of the test section to diameter). Correlation for two phase heat transfer coefficient under subcooled boiling condition is developed as a function of boiling number (Bo), Jakob number (Ja) and Prandtl number (Pr)

Simultaneous measurement of local particle movement, solids concentrations and bubble properties in fluidized bed reactors using a novel fiber optical technique

Energy Technology Data Exchange (ETDEWEB)

Tayebi, Davoud

1999-12-31

This thesis develops a new method for simultaneous measurements of local flow properties in highly concentrated multiphase flow systems such as gas-solid fluidized bed reactors. The method is based on fiber optical technique and tracer particles. A particle present in the measuring volume in front of the probe is marked with a fluorescent dye. A light source illuminates the particles and the detecting fibres receive reflected light from uncoated particles and fluorescent light from the tracer particle. Using optical filters, the fluorescent light can be distinguished and together with a small fraction of background light from uncoated particles can be used for determination of local flow properties. Using this method, one can simultaneously measure the local movement of a single tracer particle, local bubble properties and the local solids volume fractions in different positions in the bed. The method is independent of the physical properties of the tracer particles. It is also independent of the local solids concentrations in the range of 0 to 60 vol.-%, but is mainly designed for highly concentrated flow systems. A computer programme that uses good signals from at least three sensors simultaneously to calculate the tracer particle velocity in two dimensions have been developed. It also calculates the bubble properties and local solids volume fractions from the same time series. 251 refs., 150 figs., 5 tabs.

Simultaneous measurement of local particle movement, solids concentrations and bubble properties in fluidized bed reactors using a novel fiber optical technique

Energy Technology Data Exchange (ETDEWEB)

Tayebi, Davoud

1998-12-31

This thesis develops a new method for simultaneous measurements of local flow properties in highly concentrated multiphase flow systems such as gas-solid fluidized bed reactors. The method is based on fiber optical technique and tracer particles. A particle present in the measuring volume in front of the probe is marked with a fluorescent dye. A light source illuminates the particles and the detecting fibres receive reflected light from uncoated particles and fluorescent light from the tracer particle. Using optical filters, the fluorescent light can be distinguished and together with a small fraction of background light from uncoated particles can be used for determination of local flow properties. Using this method, one can simultaneously measure the local movement of a single tracer particle, local bubble properties and the local solids volume fractions in different positions in the bed. The method is independent of the physical properties of the tracer particles. It is also independent of the local solids concentrations in the range of 0 to 60 vol.-%, but is mainly designed for highly concentrated flow systems. A computer programme that uses good signals from at least three sensors simultaneously to calculate the tracer particle velocity in two dimensions have been developed. It also calculates the bubble properties and local solids volume fractions from the same time series. 251 refs., 150 figs., 5 tabs.

Prenatal exposures to persistent organic pollutants as measured in cord blood and meconium from three localities of Zhejiang, China

Energy Technology Data Exchange (ETDEWEB)

Zhao Gaofeng [State Key Laboratory of Freshwater Ecology and Biotechnology, Institute of Hydrobiology Chinese Academy of Sciences, Wuhan, 430072 (China); State Key Laboratory of Environmental Aquatic Chemistry, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing, 100085 (China); Xu Ying [State Key Laboratory of Freshwater Ecology and Biotechnology, Institute of Hydrobiology Chinese Academy of Sciences, Wuhan, 430072 (China)]. E-mail: xuying@ihb.ac.cn; Li Wen [State Key Laboratory of Freshwater Ecology and Biotechnology, Institute of Hydrobiology Chinese Academy of Sciences, Wuhan, 430072 (China); Han Guanggen [Zhejiang Center for Disease Control and Prevention, Hangzhou, 310009 (China); Ling Bo [Chinese Center for Disease Control and Prevention, Beijing, 100050 (China)

2007-05-15

Prenatal exposures to persistent organic pollutants were assessed using the levels of PCBs and organochlorine pesticides (OCPs) measured in cord blood and meconium samples from Luqiao and two other localities of the Zhejiang province in China. Luqiao is a town with the largest site for disassembly of PCB-containing obsolete transformers and electrical waste in China. The other two localities Pingqiao (100 km NW of Luqiao) and Lin'an (500 km NW of Luqiao) are towns without known electronic or electrical waste sites. A total of 23 PCB congeners (including 12 dioxin-like) and 6 OCPs were measured using the traditional GC-{mu}ECD technique. Micro-EROD bioassay was additionally used to measure TCDD-based TEQ levels of the 12 dioxin-like PCBs. Significant correlations were found between the TEQs measured by the two methods, supporting the application of micro-EROD as a practical tool for complementing the chemical analysis. The data showed that {beta}-HCH, p,p'-DDE, and 6 PCB congeners (101, 138, 153, 180, 183, and 187) were the predominant pollutants, with PCB138 being the best indicator (predictor) for total PCB levels. Cord blood and meconium from Luqiao have higher levels of PCBs than those from the other two localities, suggesting that a disassembly site for electronic and electric waste would provide an environment for greater exposure to these chemicals. The cord blood or meconium levels of {beta}-HCH, though likewise considerably high, were comparable in the three localities. Similar findings were observed for p,p'-DDE. Pollution by these OCPs might have come from past use of agricultural pesticides in the three localities.

Efficient linear criterion for witnessing Einstein-Podolsky-Rosen nonlocality under many-setting local measurements

Science.gov (United States)

Zheng, Yu-Lin; Zhen, Yi-Zheng; Chen, Zeng-Bing; Liu, Nai-Le; Chen, Kai; Pan, Jian-Wei

2017-01-01

The striking and distinctive nonlocal features of quantum mechanics were discovered by Einstein, Podolsky, and Rosen (EPR) beyond classical physics. At the core of the EPR argument, it was "steering" that Schrödinger proposed in 1935. Besides its fundamental significance, quantum steering opens up a novel application for quantum communication. Recent work has precisely characterized its properties; however, witnessing the EPR nonlocality remains a big challenge under arbitrary local measurements. Here we present an alternative linear criterion and complement existing results to efficiently testify steering for high-dimensional system in practice. By developing a novel and analytical method to tackle the maximization problem in deriving the bound of a steering criterion, we show how observed correlations can reveal powerfully the EPR nonlocality in an easily accessed manner. Although the criteria is not necessary and sufficient, it can recover some of the known results under a few settings of local measurements and is applicable even if the size of the system or the number of measurement settings are high. Remarkably, a deep connection is explicitly established between the steering and amount of entanglement. The results promise viable paths for secure communication with an untrusted source, providing optional loophole-free tests of the EPR nonlocality for high-dimensional states, as well as motivating solutions for other related problems in quantum information theory.

The Comparative Study Of Local Governance: Towards A Global Approach The Comparative Study Of Local Governance: Towards A Global Approach

Directory of Open Access Journals (Sweden)

Gerry Stoker

2010-12-01

Full Text Available The comparative study of local governance has been too focused on the institutional arrangements of the Systems of different nation states rather than the more fundamental issue of the societal functions performed by local government. This article focuses attention on four societal roles that local government systems undertake. They can support political identity, underwrite economic development, facilitate social welfare provision or act as a lifestyle co-ordinator through the practice of community governance. Linking our investigation to the embedded societal roles of local government in different systems opens up the opportunity for a more genuinely global comparative perspective. It also helps us to understand the likely forms of politics associated with different systems of local governance. It also enables us to explore the sustainability of different systems of local governance. It is suggested that a strong system of local government is likely to be one that is able to combine societal roles to a substantial degree. A vulnerable local government system is one trapped with one function that in changing societal and economic circumstances could find itself under threat.El estudio comparado de la gobernanza local se ha focalizado excesivamente en los arreglos institucionales de los sistemas de los diferentes Estados-nación en lugar de centrarse en el tema esencial de las funciones sociales que desempeñan los gobiernos locales. Este artículo centra su atención en cuatro roles sociales que desempeñan los sistemas de gobierno local. Pueden proporcionar identidad política, garantizar el desarrollo económico, facilitar la provisión de servicios sociales o actuar como coordinador de la forma de vida mediante la práctica de la gobernanza comunitaria. La vinculación de la investigación a los roles sociales asumidos por los gobiernos locales en los diferentes sistemas proporciona la posibilidad de adoptar una perspectiva global comparada

Magnetization measurements reveal the local shear stiffness of hydrogels probed by ferromagnetic nanorods

Energy Technology Data Exchange (ETDEWEB)

Bender, P., E-mail: nano@p-bender.de; Tschöpe, A., E-mail: antsch@mx.uni-saarland.de; Birringer, R., E-mail: r.birringer@nano.uni-saarland.de

2014-12-15

The local mechanical coupling of ferromagnetic nanorods in hydrogels was characterized by magnetization measurements. Nickel nanorods were synthesized by the AAO-template method and embedded in gelatine hydrogels with mechanically soft or hard matrix properties determined by the gelatine weight fraction. By applying a homogeneous magnetic field during gelation the nanorods were aligned along the field resulting in uniaxially textured ferrogels. The magnetization curves of the soft ferrogel exhibited not only important similarities but also characteristic differences as compared to the hard ferrogel. The hystereses measured in a field parallel to the texture axis were almost identical for both samples indicating effective coupling of the nanorods with the polymer network. By contrast, measurements in a magnetic field perpendicular to the texture axis revealed a much higher initial susceptibility of the soft as compared to the hard ferrogel. This difference was attributed to the additional rotation of the nanorods allowed by the reduced shear modulus in the soft ferrogel matrix. Two methods for data analysis were presented which enabled us to determine the shear modulus of the gelatine matrix which was interpreted as a local rather than macroscopic quantity in consideration of the nanoscale of the probe particles. - Highlights: • Nanorods are embedded as magnetic probes in gelatine gels. • Elastic rotation of the rods can be induced by applying a homogeneous magnetic field. • Rod rotation has significant influence on the magnetization curves. • Two methods are presented to estimate the shear modulus of the matrix from the magnetization curves.

Active load reduction using individual pitch, based on local blade flow measurements

DEFF Research Database (Denmark)

Larsen, Torben J.; Aagaard Madsen, H.; Thomsen, K.

2005-01-01

-of-the-art load-reducing concepts. Since the new flow-based concept deviates significantly from previous published load-reducing strategies, a comparison of the performance based on aeroelastic simulations is included. Advantages and drawbacks of the systems are discussed. Copyright (C) 2004 John Wiley Sons, Ltd.......A new load-reducing control strategy for individual blade control of large pitch-controlled wind turbines is presented This control concept is based on local blade inflow measurements and offers the possibility of larger load reductions, without loss of power production, than seen in other state...

Measuring Airflow in Local Exhaust Ventilation Systems. Module 23. Vocational Education Training in Environmental Sciences.

Science.gov (United States)

Consumer Dynamics Inc., Rockville, MD.

This module, one of 25 on vocational education training for careers in environmental health occupations, contains self-instructional materials on measuring airflow in local exhaust ventilation systems. Following guidelines for students and instructors and an introduction that explains what the student will learn are three lessons: (1) naming each…

Quality of local authority occupational therapy services: developing an instrument to measure the user's perspective.

NARCIS (Netherlands)

Calnan, S.; Sixma, H.J.; Calnan, M.W.; Groenewegen, P.P.

2000-01-01

The aims of this paper are threefold: (1) to describe the development of an instrument measuring quality of care from the specific perspective of the users of local authority occupational therapy services; (2) to present the results from a survey of users' views about the quality of services offered

Low-cost multi-vehicle air temperature measurements for heat load assessment in local-scale climate applications

Science.gov (United States)

Zuvela-Aloise, Maja; Weyss, Gernot; Aloise, Giulliano; Mifka, Boris; Löffelmann, Philemon; Hollosi, Brigitta; Nemec, Johana; Vucetic, Visnja

2014-05-01

In the recent years there has been a strong interest in exploring the potential of low-cost measurement devices as alternative source of meteorological monitoring data, especially in the urban areas where high-density observations become crucial for appropriate heat load assessment. One of the simple, but efficient approaches for gathering large amount of spatial data is through mobile measurement campaigns in which the sensors are attached to driving vehicles. However, non-standardized data collecting procedure, instrument quality, their response-time and design, variable device ventilation and radiation protection influence the reliability of the gathered data. We investigate what accuracy can be expected from the data collected through low-cost mobile measurements and whether the achieved quality of the data is sufficient for validation of the state-of-the-art local-scale climate models. We tested 5 types of temperature sensors and data loggers: Maxim iButton, Lascar EL-USB-2-LCD+ and Onset HOBO UX100-003 as market available devices and self-designed solar powered Arduino-based data loggers combined with the AOSONG AM2315 and Sensirion SHT21 temperature and humidity sensors. The devices were calibrated and tested in stationary mode at the Austrian Weather Service showing accuracy between 0.1°C and 0.8°C, which was mostly within the device specification range. In mobile mode, the best response-time was found for self-designed device with Arduino-based data logger and Sensirion SHT21 sensor. However, the device lacks the mechanical robustness and should be further improved for broad-range applications. We organized 4 measurement tours: two taking place in urban environment (Vienna, Austria in July 2011 and July 2013) and two in countryside with complex terrain of Mid-Adriatic islands (Hvar and Korcula, Croatia in August 2013). Measurements were taken on clear-sky, dry and hot days. We combined multiple devices attached to bicycle and cars with different

MEASUREMENTS OF ABSORPTION, EMISSIVITY REDUCTION, AND LOCAL SUPPRESSION OF SOLAR ACOUSTIC WAVES IN SUNSPOTS

International Nuclear Information System (INIS)

Chou, D.-Y.; Liang, Z.-C.; Yang, M.-H.; Zhao Hui; Sun, M.-T.

2009-01-01

The power of solar acoustic waves in magnetic regions is lower relative to the quiet Sun. Absorption, emissivity reduction, and local suppression of acoustic waves contribute to the observed power reduction in magnetic regions. We propose a model for the energy budget of acoustic waves propagating through a sunspot in terms of the coefficients of absorption, emissivity reduction, and local suppression of the sunspot. Using the property that the waves emitted along the wave path between two points have no correlation with the signal at the starting point, we can separate the effects of these three mechanisms. Applying this method to helioseismic data filtered with direction and phase-velocity filters, we measure the fraction of the contribution of each mechanism to the power deficit in the umbra of the leading sunspot of NOAA 9057. The contribution from absorption is 23.3 ± 1.3%, emissivity reduction 8.2 ± 1.4%, and local suppression 68.5 ± 1.5%, for a wave packet corresponding to a phase velocity of 6.98 x 10 -5 rad s -1 .

Variational contrast enhancement guided by global and local contrast measurements for single-image defogging

Science.gov (United States)

Zhou, Li; Bi, Du-Yan; He, Lin-Yuan

2015-01-01

The visibility of images captured in foggy conditions is impaired severely by a decrease in the contrasts of objects and veiling with a characteristic gray hue, which may limit the performance of visual applications out of doors. Contrast enhancement together with color restoration is a challenging mission for conventional fog-removal methods, as the degrading effect of fog is largely dependent on scene depth information. Nowadays, people change their minds by establishing a variational framework for contrast enhancement based on a physically based analytical model, unexpectedly resulting in color distortion, dark-patch distortion, or fuzzy features of local regions. Unlike previous work, our method treats an atmospheric veil as a scattering disturbance and formulates a foggy image as an energy functional minimization to estimate direct attenuation, originating from the work of image denoising. In addition to a global contrast measurement based on a total variation norm, an additional local measurement is designed in that optimal problem for the purpose of digging out more local details as well as suppressing dark-patch distortion. Moreover, we estimate the airlight precisely by maximization with a geometric constraint and a natural image prior in order to protect the faithfulness of the scene color. With the estimated direct attenuation and airlight, the fog-free image can be restored. Finally, our method is tested on several benchmark and realistic images evaluated by two assessment approaches. The experimental results imply that our proposed method works well compared with the state-of-the-art defogging methods.

X-ray digital industrial radiography (DIR) for local liquid velocity (VLL) measurement in trickle bed reactors (TBRs): Validation of the technique

Science.gov (United States)

Mohd Salleh, Khairul Anuar; Rahman, Mohd Fitri Abdul; Lee, Hyoung Koo; Al Dahhan, Muthanna H.

2014-06-01

Local liquid velocity measurements in Trickle Bed Reactors (TBRs) are one of the essential components in its hydrodynamic studies. These measurements are used to effectively determine a reactor's operating condition. This study was conducted to validate a newly developed technique that combines Digital Industrial Radiography (DIR) with Particle Tracking Velocimetry (PTV) to measure the Local Liquid Velocity (VLL) inside TBRs. Three millimeter-sized Expanded Polystyrene (EPS) beads were used as packing material. Three validation procedures were designed to test the newly developed technique. All procedures and statistical approaches provided strong evidence that the technique can be used to measure the VLL within TBRs.

User involvement in measuring service quality of local authority occupational therapy services: a new approach.

NARCIS (Netherlands)

Sixma, H.J.; Calnan, S.; Calnan, M.; Groenewegen, P.P.

2001-01-01

The aim of this paper is two-fold: (i) to describe the development of a new measuring instrument for quality of care from the perspective of the users of local authority Occupational Therapy (OT) services, and (ii) to evaluate the potential of the new instrument as a standardized approach for the

Measurement of local two-phase flow parameters of nanofluids using conductivity double-sensor probe.

Science.gov (United States)

Park, Yu Sun; Chang, Soon Heung

2011-04-04

A two-phase flow experiment using air and water-based γ-Al2O3 nanofluid was conducted to observe the basic hydraulic phenomenon of nanofluids. The local two-phase flow parameters were measured with a conductivity double-sensor two-phase void meter. The void fraction, interfacial velocity, interfacial area concentration, and mean bubble diameter were evaluated, and all of those results using the nanofluid were compared with the corresponding results for pure water. The void fraction distribution was flattened in the nanofluid case more than it was in the pure water case. The higher interfacial area concentration resulted in a smaller mean bubble diameter in the case of the nanofluid. This was the first attempt to measure the local two-phase flow parameters of nanofluids using a conductivity double-sensor two-phase void meter. Throughout this experimental study, the differences in the internal two-phase flow structure of the nanofluid were identified. In addition, the heat transfer enhancement of the nanofluid can be resulted from the increase of the interfacial area concentration which means the available area of the heat and mass transfer.

Multiple-copy state discrimination: Thinking globally, acting locally

International Nuclear Information System (INIS)

Higgins, B. L.; Pryde, G. J.; Wiseman, H. M.; Doherty, A. C.; Bartlett, S. D.

2011-01-01

We theoretically investigate schemes to discriminate between two nonorthogonal quantum states given multiple copies. We consider a number of state discrimination schemes as applied to nonorthogonal, mixed states of a qubit. In particular, we examine the difference that local and global optimization of local measurements makes to the probability of obtaining an erroneous result, in the regime of finite numbers of copies N, and in the asymptotic limit as N→∞. Five schemes are considered: optimal collective measurements over all copies, locally optimal local measurements in a fixed single-qubit measurement basis, globally optimal fixed local measurements, locally optimal adaptive local measurements, and globally optimal adaptive local measurements. Here an adaptive measurement is one in which the measurement basis can depend on prior measurement results. For each of these measurement schemes we determine the probability of error (for finite N) and the scaling of this error in the asymptotic limit. In the asymptotic limit, it is known analytically (and we verify numerically) that adaptive schemes have no advantage over the optimal fixed local scheme. Here we show moreover that, in this limit, the most naive scheme (locally optimal fixed local measurements) is as good as any noncollective scheme except for states with less than 2% mixture. For finite N, however, the most sophisticated local scheme (globally optimal adaptive local measurements) is better than any other noncollective scheme for any degree of mixture.

Combined local current distribution measurements and high resolution neutron radiography of operating direct methanol fuel cells

Energy Technology Data Exchange (ETDEWEB)

Schroeder, Alexander; Wippermann, Klaus [Forschungszentrum Juelich GmbH (Germany). Inst. of Energy Research, IEF-3: Fuel Cells; Sanders, Tilman [RWTH Aachen (DE). Inst. for Power Electronics and Electrical Drives (ISEA); Arlt, Tobias [Helmholtz Centre Berlin (Germany). Inst. for Applied Materials

2010-07-01

Neutron radiography allows the investigation of the local fluid distribution in direct methanol fuel cells (DMFCs) under operating conditions. Spatial resolutions in the order of some tens of micrometers at the full test cell area are achieved. This offers the possibility to study practice-oriented, large stack cells with an active area of several hundred cm{sup 2} as well as specially designed, small test cells with an area of some cm{sup 2}. Combined studies of high resolution neutron radiography and segmented cell measurements are especially valuable, because they enable a correlation of local fluid distribution and local performance [1, 2]. The knowledge of this interdependency is essential to optimise the water management and performance respecting a homogeneous fluid, current and temperature distribution and to achieve high performance and durability of DMFCs. (orig.)

Effects of muscle injury severity on localized bioimpedance measurements

International Nuclear Information System (INIS)

Nescolarde, L; Rosell-Ferrer, J; Yanguas, J; Lukaski, H; Alomar, X; Rodas, G

2015-01-01

Muscle injuries in the lower limb are common among professional football players. Classification is made according to severity and is diagnosed with radiological assessment as: grade I (minor strain or minor injury), grade II (partial rupture, moderate injury) and grade III (complete rupture, severe injury). Tetrapolar localized bioimpedance analysis (BIA) at 50 kHz made with a phase-sensitive analyzer was used to assess damage to the integrity of muscle structures and the fluid accumulation 24 h after injury in 21 injuries in the quadriceps, hamstring and calf, and was diagnosed with magnetic resonance imaging (MRI). The aim of this study was to identify the pattern of change in BIA variables as indicators of fluid [resistance (R)] and cell structure integrity [reactance (Xc) and phase angle (PA)] according to the severity of the MRI-defined injury. The % difference compared to the non-injured contralateral muscle also measured 24-h after injury of R, Xc and PA were respectively: grade I (n = 11; −10.4, −17.5 and −9.0%), grade II (n = 8; −18.4, −32.9 and −16.6%) and grade III (n = 2; −14.1, −52.9 and −43.1%), showing a greater significant decrease in Xc (p < 0.001). The greatest relative changes were in grade III injuries. However, decreases in R, that indicate fluid distribution, were not proportional to the severity of the injury. Disruption of the muscle structure, demonstrated by the localized determination of Xc, increased with the severity of muscle injury. The most significant changes 24 h after injury was the sizeable decrease in Xc that indicates a pattern of disrupted soft tissue structure, proportional to the severity of the injury. (paper)

The lived experiences of flemish midwifery students undertaking an internship in Suriname: A phenomenological study.

Science.gov (United States)

Hilde, Curinckx; Marion, Welsh; Marianne, Nieuwenhuijze

2018-05-01

The aim of this study is to explore the lived experience of Flemish midwifery students undertaking an internship in Suriname. Hermeneutic phenomenological method as described by van Manen. Seven midwifery students from one University College were selected purposefully for an in-depth interview during their internship abroad within the period October-November 2014. All interviews were audio-taped, transcribed verbatim and analysed thematically. The study revealed five overarching themes: (1) A time to reconsider the time, (2) a time of connection and disconnection, (3) spatiality for thought and rethinking, (4) a body to undergo or a body to respond and (5) the other(s) among the others. The experience of an internship in Suriname presents itself in each individual as: 'A process of awareness from the self with a main focus on the professional'. Meaning that it was a process of 'disconnection' from their own culture towards 'connection' with another culture. Both, the 'rethinking' of their role as a midwife, as well as, balancing between guarding one's own authenticity by 'responding' or being the friendly stranger through 'undergoing', was noticeably striking. Copyright © 2018 Elsevier Ltd. All rights reserved.

Bio-based Industries Joint Undertaking: The catalyst for sustainable bio-based economic growth in Europe.

Science.gov (United States)

Mengal, Philippe; Wubbolts, Marcel; Zika, Eleni; Ruiz, Ana; Brigitta, Dieter; Pieniadz, Agata; Black, Sarah

2018-01-25

This article discusses the preparation, structure and objectives of the Bio-based Industries Joint Undertaking (BBI JU). BBI JU is a public-private partnership (PPP) between the European Commission (EC) and the Bio-based Industries Consortium (BIC), the industry-led private not-for-profit organisation representing the private sectors across the bio-based industries. The model of the public-private partnership has been successful as a new approach to supporting research and innovation and de-risking investment in Europe. The BBI JU became a reality in 2014 and represents the largest industrial and economic cooperation endeavour financially ever undertaken in Europe in the area of industrial biotechnologies. It is considered to be one of the most forward-looking initiatives under Horizon 2020 and demonstrates the circular economy in action. The BBI JU will be the catalyst for this strategy to mobilise actors across Europe including large industry, small and medium-sized enterprises (SMEs), all types of research organisations, networks and universities. It will support regions and in doing so, the European Union Member States and associated countries in the implementation of their bioeconomy strategies. Copyright © 2017 Elsevier B.V. All rights reserved.

Localized Measurement of Turbulent Fluctuations in Tokamaks with Coherent Scattering of Electromagnetic Waves

International Nuclear Information System (INIS)

Mazzucato, E.

2002-01-01

Localized measurements of short-scale turbulent fluctuations in tokamaks are still an outstanding problem. In this paper, the method of coherent scattering of electromagnetic waves for the detection of density fluctuations is revisited. Results indicate that the proper choice of frequency, size and launching of the probing wave can transform this method into an excellent technique for high-resolution measurements of those fluctuations that plasma theory indicates as the potential cause of anomalous transport in tokamaks. The best spatial resolution can be achieved when the range of scattering angles corresponding to the spectrum of fluctuations under investigation is small. This favors the use of high frequency probing waves, such as those of far infrared lasers. The application to existing large tokamaks is discussed

Ministerial Decree of 12 May 1980 authorising Agip Nucleare S.p.a. in Rome to undertake health physics and medical supervision of protection against ionizing radiation

International Nuclear Information System (INIS)

1980-01-01

Section 83 of Decree No. 185 of 13 February 1964 on protection against ionizing radiation provides that institutions previously authorised by the Minister of Labour and Social Security may, on condition that they are adequately equipped for such services, be authorised to undertake health physics and medical supervision of personnel. This Decree accordingly authorises the Agip Nucleare Company to carry out this work. (NEA) [fr

From Family Based to Industrial Based Production: Local Economic Development Initiatives and the HELIX Model

Directory of Open Access Journals (Sweden)

Bartjan W Pennink

2013-01-01

Full Text Available To build a strong local economy, good practice tells us that each community should undertake a collaborative, strategically planned process to understand and then act upon its own strengths, weaknesses, opportunities and threats. From this perspective we start with the local communities but how is this related to the perspective from the Helix model in which three actors are explicitly introduced: the Government, the Industry and the Universities? The purpose of local economic development (LED is to build up the economic capacity of a local area to improve its economic future and the quality of life for all. To support  the Local Economic Development in remote areas,   a program  has been developed based on the LED frame work of the world bank. This approach and  the experiences over  the past years with this program are  described in the first part.  In the second part of the paper, We analyse work done with that program with the help of the social capital concept and the triple helix model.  In all cases it is important to pay attention to who is taken the initiative after the first move (and it is not always the governance as actor and for the triple helix we suggest  that the concepts of (national Government, Industry and University need a translation to Local Governance Agency, Cooperation or other ways of cooperation of local communities and Local Universities. Although a push from outside might help  a local region in development the endogenous factors are  also needed. Keywords: Triple Helix model, Local Economic Development, Local Actors, Double Triangle within the Helix Model

Airflows and turbulent flux measurements in mountainous terrain: Part 1. Canopy and local effects

Science.gov (United States)

Turnipseed, Andrew A.; Anderson, Dean E.; Blanken, Peter D.; Baugh, William M.; Monson, Russell K.

2003-01-01

We have studied the effects of local topography and canopy structure on turbulent flux measurements at a site located in mountainous terrain within a subalpine, coniferous forest. Our primary aim was to determine whether the complex terrain of the site affects the accuracy of eddy flux measurements from a practical perspective. We observed displacement heights, roughness lengths, spectral peaks, turbulent length scales, and profiles of turbulent intensities that were comparable in magnitude and pattern to those reported for forest canopies in simpler terrain. We conclude that in many of these statistical measures, the local canopy exerts considerably more influence than does topographical complexity. Lack of vertical flux divergence and modeling suggests that the flux footprints for the site are within the standards acceptable for the application of flux statistics. We investigated three different methods of coordinate rotation: double rotation (DR), triple rotation (TR), and planar-fit rotation (PF). Significant variability in rotation angles at low wind speeds was encountered with the commonly used DR and TR methods, as opposed to the PF method, causing some overestimation of the fluxes. However, these differences in fluxes were small when applied to large datasets involving sensible heat and CO2 fluxes. We observed evidence of frequent drainage flows near the ground during stable, stratified conditions at night. Concurrent with the appearance of these flows, we observed a positive bias in the mean vertical wind speed, presumably due to subtle topographic variations inducing a flow convergence below the measurement sensors. In the presence of such drainage flows, advection of scalars and non-zero bias in the mean vertical wind speed can complicate closure of the mass conservation budget at the site.

3D micro-particle image modeling and its application in measurement resolution investigation for visual sensing based axial localization in an optical microscope

International Nuclear Information System (INIS)

Wang, Yuliang; Li, Xiaolai; Bi, Shusheng; Zhu, Xiaofeng; Liu, Jinhua

2017-01-01

Visual sensing based three dimensional (3D) particle localization in an optical microscope is important for both fundamental studies and practical applications. Compared with the lateral ( X and Y ) localization, it is more challenging to achieve a high resolution measurement of axial particle location. In this study, we aim to investigate the effect of different factors on axial measurement resolution through an analytical approach. Analytical models were developed to simulate 3D particle imaging in an optical microscope. A radius vector projection method was applied to convert the simulated particle images into radius vectors. With the obtained radius vectors, a term of axial changing rate was proposed to evaluate the measurement resolution of axial particle localization. Experiments were also conducted for comparison with that obtained through simulation. Moreover, with the proposed method, the effects of particle size on measurement resolution were discussed. The results show that the method provides an efficient approach to investigate the resolution of axial particle localization. (paper)

Distributed 3D Source Localization from 2D DOA Measurements Using Multiple Linear Arrays

Directory of Open Access Journals (Sweden)

Antonio Canclini

2017-01-01

Full Text Available This manuscript addresses the problem of 3D source localization from direction of arrivals (DOAs in wireless acoustic sensor networks. In this context, multiple sensors measure the DOA of the source, and a central node combines the measurements to yield the source location estimate. Traditional approaches require 3D DOA measurements; that is, each sensor estimates the azimuth and elevation of the source by means of a microphone array, typically in a planar or spherical configuration. The proposed methodology aims at reducing the hardware and computational costs by combining measurements related to 2D DOAs estimated from linear arrays arbitrarily displaced in the 3D space. Each sensor measures the DOA in the plane containing the array and the source. Measurements are then translated into an equivalent planar geometry, in which a set of coplanar equivalent arrays observe the source preserving the original DOAs. This formulation is exploited to define a cost function, whose minimization leads to the source location estimation. An extensive simulation campaign validates the proposed approach and compares its accuracy with state-of-the-art methodologies.

X-ray digital industrial radiography (DIR) for local liquid velocity (VLL) measurement in trickle bed reactors (TBRs): Validation of the technique

International Nuclear Information System (INIS)

Mohd Salleh, Khairul Anuar; Lee, Hyoung Koo; Rahman, Mohd Fitri Abdul; Al Dahhan, Muthanna H.

2014-01-01

Local liquid velocity measurements in Trickle Bed Reactors (TBRs) are one of the essential components in its hydrodynamic studies. These measurements are used to effectively determine a reactor's operating condition. This study was conducted to validate a newly developed technique that combines Digital Industrial Radiography (DIR) with Particle Tracking Velocimetry (PTV) to measure the Local Liquid Velocity (V LL ) inside TBRs. Three millimeter-sized Expanded Polystyrene (EPS) beads were used as packing material. Three validation procedures were designed to test the newly developed technique. All procedures and statistical approaches provided strong evidence that the technique can be used to measure the V LL within TBRs

Effect of Wind Farm Noise on Local Residents' Decision to Adopt Mitigation Measures.

Science.gov (United States)

Botelho, Anabela; Arezes, Pedro; Bernardo, Carlos; Dias, Hernâni; Pinto, Lígia M Costa

2017-07-11

Wind turbines' noise is frequently pointed out as the reason for local communities' objection to the installation of wind farms. The literature suggests that local residents feel annoyed by such noise and that, in many instances, this is significant enough to make them adopt noise-abatement interventions on their homes. Aiming at characterizing the relationship between wind turbine noise, annoyance, and mitigating actions, we propose a novel conceptual framework. The proposed framework posits that actual sound pressure levels of wind turbines determine individual homes' noise-abatement decisions; in addition, the framework analyzes the role that self-reported annoyance, and perception of noise levels, plays on the relationship between actual noise pressure levels and those decisions. The application of this framework to a particular case study shows that noise perception and annoyance constitutes a link between the two. Importantly, however, noise also directly affects people's decision to adopt mitigating measures, independently of the reported annoyance.

Effect of Wind Farm Noise on Local Residents’ Decision to Adopt Mitigation Measures

Science.gov (United States)

Botelho, Anabela; Bernardo, Carlos; Dias, Hernâni; Pinto, Lígia M. Costa

2017-01-01

Wind turbines’ noise is frequently pointed out as the reason for local communities’ objection to the installation of wind farms. The literature suggests that local residents feel annoyed by such noise and that, in many instances, this is significant enough to make them adopt noise-abatement interventions on their homes. Aiming at characterizing the relationship between wind turbine noise, annoyance, and mitigating actions, we propose a novel conceptual framework. The proposed framework posits that actual sound pressure levels of wind turbines determine individual homes’ noise-abatement decisions; in addition, the framework analyzes the role that self-reported annoyance, and perception of noise levels, plays on the relationship between actual noise pressure levels and those decisions. The application of this framework to a particular case study shows that noise perception and annoyance constitutes a link between the two. Importantly, however, noise also directly affects people’s decision to adopt mitigating measures, independently of the reported annoyance. PMID:28696404

Detection of the local sliding in the tyre-road contact by measuring vibrations on the inner liner of the tyre

Science.gov (United States)

Niskanen, Arto J.; Tuononen, Ari J.

2017-04-01

Intelligent tyres can provide vital information from the tyre-road contact, especially for autonomous cars and intelligent infrastructure. In this paper, the acceleration measured on the inner liner of a tyre is used to detect the local sliding in the tyre-road contact. The Hilbert-Huang transform is utilized to extract the relevant vibration components and localize them in the wheel rotation angle domain. The energy of the vibration in the trailing part of the contact is shown to increase in low-friction conditions which can be related to the sliding of the tread part as a result of the shear stresses exceeding the local friction limit. To separate the effect of the surface roughness and the friction, different road surfaces were used in the measurements. In addition, the effects of different driving manoeuvres on the measured accelerations and the propagation of the sliding zone in the contact patch during braking are illustrated.

Detection of the local sliding in the tyre-road contact by measuring vibrations on the inner liner of the tyre

International Nuclear Information System (INIS)

Niskanen, Arto J; Tuononen, Ari J

2017-01-01

Intelligent tyres can provide vital information from the tyre-road contact, especially for autonomous cars and intelligent infrastructure. In this paper, the acceleration measured on the inner liner of a tyre is used to detect the local sliding in the tyre-road contact. The Hilbert–Huang transform is utilized to extract the relevant vibration components and localize them in the wheel rotation angle domain. The energy of the vibration in the trailing part of the contact is shown to increase in low-friction conditions which can be related to the sliding of the tread part as a result of the shear stresses exceeding the local friction limit. To separate the effect of the surface roughness and the friction, different road surfaces were used in the measurements. In addition, the effects of different driving manoeuvres on the measured accelerations and the propagation of the sliding zone in the contact patch during braking are illustrated. (paper)

Measuring Local Strain Rates In Ductile Shear Zones: A New Approach From Deformed Syntectonic Dykes

Science.gov (United States)

Sassier, C.; Leloup, P.; Rubatto, D.; Galland, O.; Yue, Y.; Ding, L.

2006-12-01

At the Earth surface, deformation is mostly localized in fault zones in between tectonic plates. In the upper crust, the deformation is brittle and the faults are narrow and produce earthquakes. In contrast, deformation in the lower ductile crust results in larger shear zones. While it is relatively easy to measure in situ deformation rates at the surface using for example GPS data, it is more difficult to determinate in situ values of strain rate in the ductile crust. Such strain rates can only be estimated in paleo-shear zones. Various methods have been used to assess paleo-strain rates in paleo-shear zones. For instance, cooling and/or decompression rates associated with assumptions on geothermic gradients and shear zone geometry can lead to such estimates. Another way to estimate strain rates is the integration of paleo-stress measurements in a power flow law. But these methods are indirect and imply strong assumptions. Dating of helicitic garnets or syntectonic fibres are more direct estimates. However these last techniques have been only applied in zones of low deformation and not in major shear zones. We propose a new direct method to measure local strain rates in major ductile shear zones from syntectonic dykes by coupling quantification of deformation and geochronology. We test our method in a major shear zone in a well constrained tectonic setting: the Ailao-Shan - Red River Shear Zone (ASRRsz) located in SE Asia. For this 10 km wide shear zone, large-scale fault rates, determined in three independent ways, imply strain rates between 1.17×10^{-13 s-1 and 1.52×10^{-13 s-1 between 35 and 16 Ma. Our study focused on one outcrop where different generations of syntectonic dykes are observed. First, we quantified the minimum shear strain γ for each dyke using several methods: (1) by measuring the stretching of dykes with a surface restoration method (2) by measuring the final angle of the dykes with respect to the shear direction and (3) by combining the two

Laser patterning: A new approach to measure local magneto-transport properties in multifilamentary superconducting tapes

International Nuclear Information System (INIS)

Sanchez Valdes, C.F.; Perez-Penichet, C.; Noda, C.; Arronte, M.; Batista-Leyva, A.J.; Haugen, O.; Johansen, T.H.; Han, Z.; Altshuler, E.

2007-01-01

The determination of inter- and intra-filament characteristics in superconducting composites such as BSCCO-Ag tapes is of great importance for material evaluation towards applications. Most attempts to separate the two contributions have relied on indirect methods based on magnetic measurements such as SQUID or magneto-optic imaging techniques. Here we show that laser patterning of superconducting BSCCO-Ag tapes constitutes a simple approach to measure local transport properties in a direct way, even able to separate inter- and intra-filament contributions to the overall transport behavior of the sample

Evaluation and accuracy of the local velocity data measurements in an agitated vessel

Directory of Open Access Journals (Sweden)

Kysela Bohuš

2014-03-01

Full Text Available Velocity measurements of the flow field in an agitated vessel are necessary for the improvement and better understanding of the mixing processes. The obtained results are used for the calculations of the impeller pumping capacity, comparison of the power consumption etc. We performed various measurements of the local velocities in an agitated vessel final results of which should be processed for several purposes so it was necessary to make an analysis of the obtained data suitability and their quality. Analysed velocity data were obtained from the LDA (Laser Doppler Anemometry and PIV (Particle Image Velocimetry measurements performed on a standard equipment where the flat bottomed vessel with four baffles was agitated by the six-blade Rushton turbine. The results from both used methods were compared. The frequency analyses were examined as well as the dependency of the data rates, time series lengths etc. The demands for the data processed in the form of the ensemble-averaged results were also established.

Measurement of HbA1c in multicentre diabetes trials - should blood samples be tested locally or sent to a central laboratory: an agreement analysis.

Science.gov (United States)

Arch, Barbara N; Blair, Joanne; McKay, Andrew; Gregory, John W; Newland, Paul; Gamble, Carrol

2016-10-24

Glycated haemoglobin (HbA1c) is an important outcome measure in diabetes clinical trials. For multicentre designs, HbA1c can be measured locally at participating centres or by sending blood samples to a central laboratory. This study analyses the agreement between local and central measurements, using 1-year follow-up data collected in a multicentre randomised controlled trial (RCT) of newly diagnosed children with type I diabetes. HbA1c measurements were routinely analysed both locally and centrally at baseline and then at 3, 6, 9 and 12 months and the data reported in mmol/mol. Agreement was assessed by calculating the bias and 95 % limits of agreement, using the Bland-Altman analysis method. A predetermined benchmark for clinically acceptable margin of error between measurements was subjectively set as ±10 % for HbA1c. The percentage of pairs of measurements that were classified as clinically acceptable was calculated. Descriptive statistics were used to examine the agreement within centres. Treatment group was not considered. Five hundred and ninety pairs of measurement, representing 255 children and 15 trial centres across four follow-up time points, were compared. There was no significant bias: local measurements were an average of 0.16 mmol/mol (SD = 4.5, 95 % CI -0.2 to 0.5) higher than central. The 95 % limits of agreement were -8.6 to 9.0 mmol/mol (local minus central). Eighty percent of local measurements were within ±10 % of corresponding central measurements. Some trial centres were more varied in the differences observed between local and central measurements: IQRs ranging from 3 to 9 mmol/mol; none indicated systematic bias. Variation in agreement between HbA1c measurements was greater than had been expected although no overall bias was detected and standard deviations were similar. Discrepancies were present across all participating centres. These findings have implications for the comparison of standards of clinical care between centres

Local probe (170Yb3+) measurements of magnetic fields in YBa2Cu3Ox

International Nuclear Information System (INIS)

Hodges, J.A.; Bonville, P.; Vincent, E.

1989-01-01

We introduce the technique of studying the field dependence of the electro-nuclear energy levels of a rare earth to measure the magnetic field present at the rare earth/yttrium site in YBa 2 Cu 3 O x . Measurements were made by 170 Yb spectroscopy. The hyperfine spectrum of the ground state Kramers doublet for Yb 3+ ions diluted into this matrix is sensitive to fields in the range 100 to 2000G. Flux penetration and trapping at the local site level have been measured in superconducting samples. A molecular field exists on the rare earth site in non superconducting samples suggesting that the ordered Cu2 magnetic moments are intrinsically non colinear

Measuring agreement between decision support reminders: the cloud vs. the local expert.

Science.gov (United States)

Dixon, Brian Edward; Simonaitis, Linas; Perkins, Susan M; Wright, Adam; Middleton, Blackford

2014-04-10

A cloud-based clinical decision support system (CDSS) was implemented to remotely provide evidence-based guideline reminders in support of preventative health. Following implementation, we measured the agreement between preventive care reminders generated by an existing, local CDSS and the new, cloud-based CDSS operating on the same patient visit data. Electronic health record data for the same set of patients seen in primary care were sent to both the cloud-based web service and local CDSS. The clinical reminders returned by both services were captured for analysis. Cohen's Kappa coefficient was calculated to compare the two sets of reminders. Kappa statistics were further adjusted for prevalence and bias due to the potential effects of bias in the CDS logic and prevalence in the relative small sample of patients. The cloud-based CDSS generated 965 clinical reminders for 405 patient visits over 3 months. The local CDSS returned 889 reminders for the same patient visit data. When adjusted for prevalence and bias, observed agreement varied by reminder from 0.33 (95% CI 0.24 - 0.42) to 0.99 (95% CI 0.97 - 1.00) and demonstrated almost perfect agreement for 7 of the 11 reminders. Preventive care reminders delivered by two disparate CDS systems show substantial agreement. Subtle differences in rule logic and terminology mapping appear to account for much of the discordance. Cloud-based CDSS therefore show promise, opening the door for future development and implementation in support of health care providers with limited resources for knowledge management of complex logic and rules.

Use of Income as a Measure of Local Fiscal Ability in the State School Aid Formula. Occasional Paper #10.

Science.gov (United States)

Samter, Eugene C.

It is often suggested that measuring local fiscal ability by full valuation of property per public school pupil is inaccurate and inequitable. One substitute measure proposed is district income per pupil or a combination of district income and property value per pupil. However, using this measure would result in a rise in the aid ratios in only…

Scanning Laser Ophthalmoscope Measurement of Local Fundus Reflectance and Autofluorescence Changes Arising from Rhodopsin Bleaching and Regeneration

OpenAIRE

Morgan, Jessica I. W.; Pugh, Edward N.

2013-01-01

Rhodopsin was measured locally in the retina with a widely available, dual wavelength scanning laser ophthalmoscope that does not require pupil dilation. Increased autofluorescence attendant bleaching arises largely from transient removal of rhodopsin's screening of autofluorescent fluorochromes.

Homotopic non-local regularized reconstruction from sparse positron emission tomography measurements

International Nuclear Information System (INIS)

Wong, Alexander; Liu, Chenyi; Wang, Xiao Yu; Fieguth, Paul; Bie, Hongxia

2015-01-01

Positron emission tomography scanners collect measurements of a patient’s in vivo radiotracer distribution. The system detects pairs of gamma rays emitted indirectly by a positron-emitting radionuclide (tracer), which is introduced into the body on a biologically active molecule, and the tomograms must be reconstructed from projections. The reconstruction of tomograms from the acquired PET data is an inverse problem that requires regularization. The use of tightly packed discrete detector rings, although improves signal-to-noise ratio, are often associated with high costs of positron emission tomography systems. Thus a sparse reconstruction, which would be capable of overcoming the noise effect while allowing for a reduced number of detectors, would have a great deal to offer. In this study, we introduce and investigate the potential of a homotopic non-local regularization reconstruction framework for effectively reconstructing positron emission tomograms from such sparse measurements. Results obtained using the proposed approach are compared with traditional filtered back-projection as well as expectation maximization reconstruction with total variation regularization. A new reconstruction method was developed for the purpose of improving the quality of positron emission tomography reconstruction from sparse measurements. We illustrate that promising reconstruction performance can be achieved for the proposed approach even at low sampling fractions, which allows for the use of significantly fewer detectors and have the potential to reduce scanner costs

Measurements of atmospheric aerosol in the Salentum Peninsula and its correlation with local meteorology

International Nuclear Information System (INIS)

Belosi, F.; Prodi, F.; Contini, D.; Donateo, A.

2006-01-01

In this paper the results of measurements of Total Suspended Particles (TSP), PM10 and PM2.5 and their correlation with meteorological parameters are presented. The samplings were carried out with a mobile laboratory in seven locations in the Salentum Peninsula located in the southeastern part of Italy in Puglia. Measurements were taken discontinuously during the period 2002-2005. Up to now no systematic analyses of aerosol concentrations in the Salentum Peninsula have been presented in the scientific literature. This study is therefore a useful basis for assessing the local situation and for planning future monitoring. Measurements have been performed, on a daily basis, using standard European inlet (CEN-EN12341, 1998) and successive gravimetric detection of aerosol deposited on filters. The measurement sites can be considered representative of urban background for all the cases investigated. An analysis of the random uncertainties (LOQ and LOD) for the different types of filters used is reported. Results show concentrations in good agreement with lognormal distributions, indicating that the PM10 fraction is about 66% of TSP and PM2.5 is about 67% of PM10, which has allowed to evaluate that the fraction of PM2.5 is about 44% of TSP. Concentration levels were correlated with local meteorological parameters, especially with wind velocity and precipitations. Results indicate that during rainy days the average concentration is reduced of about 70% and the reduction is larger for TSP and PM10 with respect to PM2.5. There is, on average, a substantial decrease of concentration levels in high wind conditions. Results also suggest the possibility of a significant contribution of African dust to PM10 and TSP, especially in the spring and summer season, which could be responsible for some days with concentrations above the threshold imposed by the European legislation on PM10

Local heat transfer measurement and thermo-fluid characterization of a pulsating heat pipe

International Nuclear Information System (INIS)

Mameli, Mauro; Marengo, Marco; Khandekar, Sameer

2014-01-01

A compact Closed Loop Pulsating Heat Pipe (CLPHP), filled with ethanol (65% v/v), made of four transparent glass tubes forming the adiabatic section and connected with copper U-turns in the evaporator and condenser sections respectively, is designed in order to perform comprehensive thermal-hydraulic performance investigation. Local heat transfer coefficient is estimated by measurement of tube wall and internal fluid temperatures in the evaporator section. Simultaneously, fluid pressure oscillations are recorded together with the corresponding flow patterns. The thermal performances are measured for different heat input levels and global orientation of the device with respect to gravity. One exploratory test is also done with azeotropic mixture of ethanol and water. Results show that a stable device operation is achieved (i.e. evaporator wall temperatures can reach a pseudo-steady-state) only when a circulating flow mode is established superimposed on local pulsating flow. The heat transfer performance strongly depends on the heat input level and the inclination angle, which, in turn, also affect the ensuing flow pattern. The spectral analysis of the pressure signal reveals that even during the stable performance regimes, characteristic fluid oscillation frequencies are not uniquely recognizable. Equivalent thermal conductivities of the order of 10-15 times that of pure copper are achieved. Due to small number of turns horizontal mode operation is not feasible. Preliminary results indicate that filling azeotropic mixture of ethanol and water as working fluid does not alter the thermal performance as compared to pure ethanol case. (authors)

Study and realization of a parallel plate avalanche counter used for time of flight and localization measurements

International Nuclear Information System (INIS)

Pellegrin, P.O.

1985-01-01

A parallel Plates Avalanche Counter (P.P.A.C.) allowing high resolution training and localization is studied. It is designed to be placed on the beam trajectory-including the magnetic spectrometer of SARA accelerator at ISN Grenoble. Two purposes are searched: firstly to improve the time-of-flight measurement due to the very high intrinsic time resolution (it can be less than 150 ps), secondly to measure with accuracy the scattering angle of the particle on the target, due to its localization. The detector thickness has been reduced to set aside as unimportant the disturbance produced on the particle trajectory. The theoretical aspect of the detector operation and a quantitative study of the disturbances it causes on particle energy are presented. The set-up and its necessary surroundings are described with experimental results of its characteristics [fr

Passive detection and localization of fatigue cracking in aluminum plates using Green's function reconstruction from ambient noise.

Science.gov (United States)

Yang, Yang; Xiao, Li; Qu, Wenzhong; Lu, Ye

2017-11-01

Recent theoretical and experimental studies have demonstrated that a local Green's function can be retrieved from the cross-correlation of ambient noise field. This technique can be used to detect fatigue cracking in metallic structures, owing to the fact that the presence of crack can lead to a change in Green's function. This paper presents a method of structural fatigue cracking characterization method by measuring Green's function reconstruction from noise excitation and verifies the feasibility of crack detection in poor noise source distribution. Fatigue cracks usually generate nonlinear effects, in which different wave amplitudes and frequency compositions can cause different nonlinear responses. This study also undertakes analysis of the capacity of the proposed approach to identify fatigue cracking under different noise amplitudes and frequency ranges. Experimental investigations of an aluminum plate are conducted to assess the cross-correlations of received noise between sensor pairs and finally to detect the introduced fatigue crack. A damage index is proposed according to the variation between cross-correlations obtained from the pristine crack closed state and the crack opening-closure state when sufficient noise amplitude is used to generate nonlinearity. A probability distribution map of damage is calculated based on damage indices. The fatigue crack introduced in the aluminum plate is successfully identified and oriented, verifying that a fatigue crack can be detected by reconstructing Green's functions from an imperfect diffuse field in which ambient noise sources exist locally. Copyright © 2017 Elsevier B.V. All rights reserved.

2D image of local density and magnetic fluctuations from line-integrated interferometry-polarimetry measurements.

Science.gov (United States)

Lin, L; Ding, W X; Brower, D L

2014-11-01

Combined polarimetry-interferometry capability permits simultaneous measurement of line-integrated density and Faraday effect with fast time response (∼1 μs) and high sensitivity. Faraday effect fluctuations with phase shift of order 0.05° associated with global tearing modes are resolved with an uncertainty ∼0.01°. For physics investigations, local density fluctuations are obtained by inverting the line-integrated interferometry data. The local magnetic and current density fluctuations are then reconstructed using a parameterized fit of the polarimetry data. Reconstructed 2D images of density and magnetic field fluctuations in a poloidal cross section exhibit significantly different spatial structure. Combined with their relative phase, the magnetic-fluctuation-induced particle transport flux and its spatial distribution are resolved.

2D image of local density and magnetic fluctuations from line-integrated interferometry-polarimetry measurements

International Nuclear Information System (INIS)

Lin, L.; Ding, W. X.; Brower, D. L.

2014-01-01

Combined polarimetry-interferometry capability permits simultaneous measurement of line-integrated density and Faraday effect with fast time response (∼1 μs) and high sensitivity. Faraday effect fluctuations with phase shift of order 0.05° associated with global tearing modes are resolved with an uncertainty ∼0.01°. For physics investigations, local density fluctuations are obtained by inverting the line-integrated interferometry data. The local magnetic and current density fluctuations are then reconstructed using a parameterized fit of the polarimetry data. Reconstructed 2D images of density and magnetic field fluctuations in a poloidal cross section exhibit significantly different spatial structure. Combined with their relative phase, the magnetic-fluctuation-induced particle transport flux and its spatial distribution are resolved

Jet Joint Undertaking. Annual report 1990

International Nuclear Information System (INIS)

1991-05-01

The Joint European Torus is the largest project in the coordinated fusion programme of the European Atomic Energy Community (EURATOM). A brief general introduction provides an overview of the planning of the Report. This is followed by a description of JET and the Euratom and International Fusion Programmes, which summarize the main features of the JET apparatus and its experimental programme and explains the position of the Project in the overall Euratom programme. In addition, this relates and compares JET to other large fusion devices throughout the world. The following section reports on the technical status of the machine including: technical changes and achievements during 1989; details of the operational organization of experiments and pulse statistics; and progress on enhancements in machine systems for future operation. This is followed by the results of JET operations in 1990 under various operating conditions, including ohmic heating, radio-frequency (RF) heating, neutral beam (NB) heating and various combined scenarios in different magnetic field configurations; the overall global and local behaviour observed; and the progress towards reactor conditions. In particular, the comparative performance between JET and other tokamaks, in terms of the triple fusion product, shows the substantial achievements made by JET since the start of operations in 1983. The second part of the Report explains the organization and management of the Project and describes the administration of JET. In particular, it sets out the budget situation; contractual arrangements during 1990; and details of the staffing arrangements and complement

What Does Pioneering Mean in Local Sustainable Development? : A Decade ofLocal Sustainability Performance Measurement in the Netherlands

NARCIS (Netherlands)

Hoppe, Thomas; Coenen, Franciscus H.J.M.

2011-01-01

“Think global, act local” is a phrase much related to green governance. Since the Earth Summit in Rio de Jañeiro and its ‘Local Agenda 21’ in 1992 it is accepted that local authorities have a key role in implementing sustainable development. During the early 1990’s Local Agenda 21 diffused to many

Timelapse ultrasonic tomography for measuring damage localization in geomechanics laboratory tests.

Science.gov (United States)

Tudisco, Erika; Roux, Philippe; Hall, Stephen A; Viggiani, Giulia M B; Viggiani, Gioacchino

2015-03-01

Variation of mechanical properties in materials can be detected non-destructively using ultrasonic measurements. In particular, changes in elastic wave velocity can occur due to damage, i.e., micro-cracking and particles debonding. Here the challenge of characterizing damage in geomaterials, i.e., rocks and soils, is addressed. Geomaterials are naturally heterogeneous media in which the deformation can localize, so that few measurements of acoustic velocity across the sample are not sufficient to capture the heterogeneities. Therefore, an ultrasonic tomography procedure has been implemented to map the spatial and temporal variations in propagation velocity, which provides information on the damage process. Moreover, double beamforming has been successfully applied to identify and isolate multiple arrivals that are caused by strong heterogeneities (natural or induced by the deformation process). The applicability of the developed experimental technique to laboratory geomechanics testing is illustrated using data acquired on a sample of natural rock before and after being deformed under triaxial compression. The approach is then validated and extended to time-lapse monitoring using data acquired during plane strain compression of a sample including a well defined layer with different mechanical properties than the matrix.

Impact of a Locally Measured H {sub 0} on the Interpretation of Cosmic-chronometer Data

Energy Technology Data Exchange (ETDEWEB)

Wei, Jun-Jie; Melia, Fulvio; Wu, Xue-Feng, E-mail: jjwei@pmo.ac.cn, E-mail: fmelia@email.arizona.edu, E-mail: xfwu@pmo.ac.cn [Purple Mountain Observatory, Chinese Academy of Sciences, Nanjing (China)

2017-02-01

Many measurements in cosmology depend on the use of integrated distances or time, but galaxies evolving passively on a timescale much longer than their age difference allow us to determine the expansion rate H ( z ) solely as a function of the redshift–time derivative dz / dt . These model-independent “cosmic chronometers” can therefore be powerful discriminators for testing different cosmologies. In previous applications, the available sources strongly disfavored models (such as ΛCDM) predicting a variable acceleration, preferring instead a steady expansion rate over the redshift range 0 ≲ z ≲ 2. A more recent catalog of 30 objects appears to suggest non-steady expansion. In this paper, we show that such a result is entirely due to the inclusion of a high, locally inferred value of the Hubble constant H{sub 0} as an additional datum in a set of otherwise pure cosmic-chronometer measurements. This H {sub 0}, however, is not the same as the background Hubble constant if the local expansion rate is influenced by a Hubble Bubble. Used on their own, the cosmic chronometers completely reverse this conclusion, favoring instead a constant expansion rate out to z∼2.

X-ray digital industrial radiography (DIR) for local liquid velocity (V(LL)) measurement in trickle bed reactors (TBRs): validation of the technique.

Science.gov (United States)

Mohd Salleh, Khairul Anuar; Rahman, Mohd Fitri Abdul; Lee, Hyoung Koo; Al Dahhan, Muthanna H

2014-06-01

Local liquid velocity measurements in Trickle Bed Reactors (TBRs) are one of the essential components in its hydrodynamic studies. These measurements are used to effectively determine a reactor's operating condition. This study was conducted to validate a newly developed technique that combines Digital Industrial Radiography (DIR) with Particle Tracking Velocimetry (PTV) to measure the Local Liquid Velocity (V(LL)) inside TBRs. Three millimeter-sized Expanded Polystyrene (EPS) beads were used as packing material. Three validation procedures were designed to test the newly developed technique. All procedures and statistical approaches provided strong evidence that the technique can be used to measure the V(LL) within TBRs.

Variation in Adherence to External Beam Radiotherapy Quality Measures Among Elderly Men With Localized Prostate Cancer

International Nuclear Information System (INIS)

Bekelman, Justin E.; Zelefsky, Michael J.; Jang, Thomas L.; Basch, Ethan M.; Schrag, Deborah

2007-01-01

Purpose: To characterize the variation in adherence to quality measures of external beam radiotherapy (EBRT) for localized prostate cancer and its relation to patient and provider characteristics in a population-based, representative sample of U.S. men. Methods and Materials: We evaluated EBRT quality measures proposed by a RAND expert panel of physicians among men aged ≥65 years diagnosed between 2000 and 2002 with localized prostate cancer and treated with primary EBRT using data from the linked Surveillance, Epidemiology, and End Results (SEER)-Medicare program. We assessed the adherence to five EBRT quality measures that were amenable to analysis using SEER-Medicare data: (1) use of conformal RT planning; (2) use of high-energy (>10-MV) photons; (3) use of custom immobilization; (4) completion of two follow-up visits with a radiation oncologist in the year after therapy; and (5) radiation oncologist board certification. Results: Of the 11,674 patients, 85% had received conformal RT planning, 75% had received high-energy photons, and 97% had received custom immobilization. One-third of patients had completed two follow-up visits with a radiation oncologist, although 91% had at least one visit with a urologist or radiation oncologist. Most patients (85%) had been treated by a board-certified radiation oncologist. Conclusions: The overall high adherence to EBRT quality measures masked substantial variation in geography, socioeconomic status in the area of residence, and teaching affiliation of the RT facility. Future research should examine the reasons for the variations in these measures and whether the variation is associated with important clinical outcomes

Similarity measures for face recognition

CERN Document Server

Vezzetti, Enrico

2015-01-01

Face recognition has several applications, including security, such as (authentication and identification of device users and criminal suspects), and in medicine (corrective surgery and diagnosis). Facial recognition programs rely on algorithms that can compare and compute the similarity between two sets of images. This eBook explains some of the similarity measures used in facial recognition systems in a single volume. Readers will learn about various measures including Minkowski distances, Mahalanobis distances, Hansdorff distances, cosine-based distances, among other methods. The book also summarizes errors that may occur in face recognition methods. Computer scientists "facing face" and looking to select and test different methods of computing similarities will benefit from this book. The book is also useful tool for students undertaking computer vision courses.

Lake and wetland ecosystem services measuring water storage and local climate regulation

Science.gov (United States)

Wong, Christina P.; Jiang, Bo; Bohn, Theodore J.; Lee, Kai N.; Lettenmaier, Dennis P.; Ma, Dongchun; Ouyang, Zhiyun

2017-04-01

Developing interdisciplinary methods to measure ecosystem services is a scientific priority, however, progress remains slow in part because we lack ecological production functions (EPFs) to quantitatively link ecohydrological processes to human benefits. In this study, we tested a new approach, combining a process-based model with regression models, to create EPFs to evaluate water storage and local climate regulation from a green infrastructure project on the Yongding River in Beijing, China. Seven artificial lakes and wetlands were established to improve local water storage and human comfort; evapotranspiration (ET) regulates both services. Managers want to minimize the trade-off between water losses and cooling to sustain water supplies while lowering the heat index (HI) to improve human comfort. We selected human benefit indicators using water storage targets and Beijing's HI, and the Variable Infiltration Capacity model to determine the change in ET from the new ecosystems. We created EPFs to quantify the ecosystem services as marginal values [Δfinal ecosystem service/Δecohydrological process]: (1) Δwater loss (lake evaporation/volume)/Δdepth and (2) Δsummer HI/ΔET. We estimate the new ecosystems increased local ET by 0.7 mm/d (20.3 W/m2) on the Yongding River. However, ET rates are causing water storage shortfalls while producing no improvements in human comfort. The shallow lakes/wetlands are vulnerable to drying when inflow rates fluctuate, low depths lead to higher evaporative losses, causing water storage shortfalls with minimal cooling effects. We recommend managers make the lakes deeper to increase water storage, and plant shade trees to improve human comfort in the parks.

On the local equilibrium condition

International Nuclear Information System (INIS)

Hessling, H.

1994-11-01

A physical system is in local equilibrium if it cannot be distinguished from a global equilibrium by ''infinitesimally localized measurements''. This should be a natural characterization of local equilibrium, but the problem is to give a precise meaning to the qualitative phrase ''infinitesimally localized measurements''. A solution is suggested in form of a Local Equilibrium Condition (LEC), which can be applied to linear relativistic quantum field theories but not directly to selfinteracting quantum fields. The concept of local temperature resulting from LEC is compared to an old approach to local temperature based on the principle of maximal entropy. It is shown that the principle of maximal entropy does not always lead to physical states if it is applied to relativistic quantum field theories. (orig.)

FIB-based measurement of local residual stresses on microsystems

Science.gov (United States)

Vogel, Dietmar; Sabate, Neus; Gollhardt, Astrid; Keller, Juergen; Auersperg, Juergen; Michel, Bernd

2006-03-01

The paper comprises research results obtained for stress determination on micro and nanotechnology components. It meets the concern of controlling stresses introduced to sensors, MEMS and electronics devices during different micromachining processes. The method bases on deformation measurement options made available inside focused ion beam equipment. Removing locally material by ion beam milling existing stresses / residual stresses lead to deformation fields around the milled feature. Digital image correlation techniques are used to extract deformation values from micrographs captured before and after milling. In the paper, two main milling features have been analyzed - through hole and through slit milling. Analytical solutions for stress release fields of in-plane stresses have been derived and compared to respective experimental findings. Their good agreement allows to settle a method for determination of residual stress values, which is demonstrated for thin membranes manufactured by silicon micro technology. Some emphasis is made on the elimination of main error sources for stress determination, like rigid body object displacements and rotations due to drifts of experimental conditions under FIB imaging. In order to illustrate potential application areas of the method residual stress suppression by ion implantation is evaluated by the method and reported here.

Evaluating measurement invariance across assessment modes of phone interview and computer self-administered survey for the PROMIS measures in a population-based cohort of localized prostate cancer survivors.

Science.gov (United States)

Wang, Mian; Chen, Ronald C; Usinger, Deborah S; Reeve, Bryce B

2017-11-01

To evaluate measurement invariance (phone interview vs computer self-administered survey) of 15 PROMIS measures responded by a population-based cohort of localized prostate cancer survivors. Participants were part of the North Carolina Prostate Cancer Comparative Effectiveness and Survivorship Study. Out of the 952 men who took the phone interview at 24 months post-treatment, 401 of them also completed the same survey online using a home computer. Unidimensionality of the PROMIS measures was examined using single-factor confirmatory factor analysis (CFA) models. Measurement invariance testing was conducted using longitudinal CFA via a model comparison approach. For strongly or partially strongly invariant measures, changes in the latent factors and factor autocorrelations were also estimated and tested. Six measures (sleep disturbance, sleep-related impairment, diarrhea, illness impact-negative, illness impact-positive, and global satisfaction with sex life) had locally dependent items, and therefore model modifications had to be made on these domains prior to measurement invariance testing. Overall, seven measures achieved strong invariance (all items had equal loadings and thresholds), and four measures achieved partial strong invariance (each measure had one item with unequal loadings and thresholds). Three measures (pain interference, interest in sexual activity, and global satisfaction with sex life) failed to establish configural invariance due to between-mode differences in factor patterns. This study supports the use of phone-based live interviewers in lieu of PC-based assessment (when needed) for many of the PROMIS measures.

A statistical-dynamical modeling approach for the simulation of local paleo proxy records using GCM output

Energy Technology Data Exchange (ETDEWEB)

Reichert, B.K.; Bengtsson, L. [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Aakesson, O. [Sveriges Meteorologiska och Hydrologiska Inst., Norrkoeping (Sweden)

1998-08-01

Recent proxy data obtained from ice core measurements, dendrochronology and valley glaciers provide important information on the evolution of the regional or local climate. General circulation models integrated over a long period of time could help to understand the (external and internal) forcing mechanisms of natural climate variability. For a systematic interpretation of in situ paleo proxy records, a combined method of dynamical and statistical modeling is proposed. Local 'paleo records' can be simulated from GCM output by first undertaking a model-consistent statistical downscaling and then using a process-based forward modeling approach to obtain the behavior of valley glaciers and the growth of trees under specific conditions. The simulated records can be compared to actual proxy records in order to investigate whether e.g. the response of glaciers to climatic change can be reproduced by models and to what extent climate variability obtained from proxy records (with the main focus on the last millennium) can be represented. For statistical downscaling to local weather conditions, a multiple linear forward regression model is used. Daily sets of observed weather station data and various large-scale predictors at 7 pressure levels obtained from ECMWF reanalyses are used for development of the model. Daily data give the closest and most robust relationships due to the strong dependence on individual synoptic-scale patterns. For some local variables, the performance of the model can be further increased by developing seasonal specific statistical relationships. The model is validated using both independent and restricted predictor data sets. The model is applied to a long integration of a mixed layer GCM experiment simulating pre-industrial climate variability. The dynamical-statistical local GCM output within a region around Nigardsbreen glacier, Norway is compared to nearby observed station data for the period 1868-1993. Patterns of observed

Prevention of oil spill pollution in sea water using locally available materials

International Nuclear Information System (INIS)

Anisuddin, S.; Al-Hashar, Naseer A.; Tahseen, S.

2005-01-01

Oil spill pollution, a severe environmental problem, which persists in marine environment or in inland water across the world, has grown to an alarming magnitude with increased levels of oil production and transport. The causes oil pollution are categorized as either accidental or operational, wherever oil is produced, transported, stored and used on the surface of sea or land. Hence, it is almost impossible for marine life to be freed from the adverse affects of oil spill, through the discharge of oil is controlled by an international convention. Prime concern for the health of marine life has created an instinct for undertaking this study by authors. Objectives of the present work include testing of four different local materials in separating oil from having different oil concentrations, and their efficiency of removal. The work also focuses on effect of time of contact and dosage of materials used for oil removal. Corchorus depressus locally available has proved to be more effective when compared to other materials utilized in addressing oil-spill related problems. At the same time its byproducts do not give rise to unwanted hazards to marine life. (author)

The concept of estimation of elevator shaft control measurement results in the local 3D coordinate system

Directory of Open Access Journals (Sweden)

Filipiak-Kowszyk Daria

2018-01-01

Full Text Available Geodetic control measurements play an important part because they provide information about the current state of repair of the construction, which has a direct impact on the safety assessment of its exploitation. Authors in this paper have focused on control measurements of the elevator shaft. The article discusses the problem of determining the deviation of elevator shaft walls from the vertical plane in the local 3D coordinate system. It presents a concept of estimation of measurements results base on the parametric method with conditions on parameters. The simulated measurement results were used to verify the concept presented in the paper.

Current algebra and the local nature of symmetries in local quantum theory

International Nuclear Information System (INIS)

Doplicher, S.

In this report we mainly discuss the problem of finding local observables which measure the charges in a volume smaller than their localization region, in particular providing the existence of local observables with a specific physical interpretation. In the same way we can also establish the existence of a version of the current algebra structure. Similar local observables can be constructed for the energy-momentum; we also comment on the local implementation of supersymmetries. (orig./HSI)

Gibbs Measures Over Locally Tree-Like Graphs and Percolative Entropy Over Infinite Regular Trees

Science.gov (United States)

Austin, Tim; Podder, Moumanti

2018-03-01

Consider a statistical physical model on the d-regular infinite tree Td described by a set of interactions Φ . Let Gn be a sequence of finite graphs with vertex sets V_n that locally converge to Td. From Φ one can construct a sequence of corresponding models on the graphs G_n. Let μ_n be the resulting Gibbs measures. Here we assume that μ n converges to some limiting Gibbs measure μ on Td in the local weak^* sense, and study the consequences of this convergence for the specific entropies |V_n|^{-1}H(μ _n). We show that the limit supremum of |V_n|^{-1}H(μ _n) is bounded above by the percolative entropy H_{it{perc}}(μ ), a function of μ itself, and that |V_n|^{-1}H(μ _n) actually converges to H_{it{perc}}(μ ) in case Φ exhibits strong spatial mixing on T_d. When it is known to exist, the limit of |V_n|^{-1}H(μ _n) is most commonly shown to be given by the Bethe ansatz. Percolative entropy gives a different formula, and we do not know how to connect it to the Bethe ansatz directly. We discuss a few examples of well-known models for which the latter result holds in the high temperature regime.

Local impedance measurement of an electrode/single-pentacene-grain interface by frequency-modulation scanning impedance microscopy

Energy Technology Data Exchange (ETDEWEB)

Kimura, Tomoharu; Yamada, Hirofumi, E-mail: h-yamada@kuee.kyoto-u.ac.jp [Department of Electronic Science and Engineering, Kyoto University, Kyoto 615-8510 (Japan); Kobayashi, Kei [Department of Electronic Science and Engineering, Kyoto University, Kyoto 615-8510 (Japan); The Hakubi Center for Advanced Research, Kyoto University, Kyoto 615-8520 (Japan)

2015-08-07

The device performances of organic thin film transistors are often limited by the metal–organic interface because of the disordered molecular layers at the interface and the energy barriers against the carrier injection. It is important to study the local impedance at the interface without being affected by the interface morphology. We combined frequency modulation atomic force microscopy with scanning impedance microscopy (SIM) to sensitively measure the ac responses of the interface to an ac voltage applied across the interface and the dc potential drop at the interface. By using the frequency-modulation SIM (FM-SIM) technique, we characterized the interface impedance of a Pt electrode and a single pentacene grain as a parallel circuit of a contact resistance and a capacitance. We found that the reduction of the contact resistance was caused by the reduction of the energy level mismatch at the interface by the FM-SIM measurements, demonstrating the usefulness of the FM-SIM technique for investigation of the local interface impedance without being affected by its morphology.

Local time, substorm, and seasonal dependence of electron precipitation at L≅4 inferred from riometer measurements

International Nuclear Information System (INIS)

Rosenberg, T.J.; Dudeney, J.R.

1986-01-01

We have examined the variations of electron precipitation at L≅4 as inferred from riometer measurements of cosmic radio noise absorption made during 1975 at Siple Station and Halley Bay, Antarctica. The results are presented in the form of annual and seasonal averages of 1/2-hourly values for two geomagnetic activity subsets, AE>140 nT (disturbed) and AE≤ 140 nT (quiet). Monthly quiet day curves were used to remove the diurnal and seasonal variations in the background noise levels. Generally, the local time characteristics of the absorption were the same at both stations; the highest absorption occurred in the 0400--1600 MLT sector during disturbed conditions and in the 1200--2000 MLT sector during quiet conditions. For high AE, the highest correlation was obtained at a lag equal to the magnetic local time difference (1.5 hours) between the two stations. On the other hand, for low AE, the highest correlation occurred for a lag of 3.0 hours, nearer the local solar time difference (3.8 hours). Consistently higher absorption was measured at Halley on the average during both levels of magnetic disturbance and in all seasons. At both locations, and for both geomagnetic activity subsets, more absorption was observed in summer and equinox than in winter. This is in contrast to earlier studies for L≥6, and suggests that a meridional reversal of seasonal behavior occurs between L = 4 and L = 6

Identification of Preferred Sources of Information for Undertaking Studies in the Faculty of Engineering Management at Poznan University of Technology

Directory of Open Access Journals (Sweden)

Magdalena Wyrwicka

2015-06-01

Full Text Available Since 2010 a survey has been conducted among first-year students about sources of information which influence the decision of undertaking field studies in Safety Engineering, Management Engineering and Logistics in the Faculty of Engineering Management at Poznan University of Technology. The goal of these analyses is both to assess the effectiveness of promotion and also show trends in the use of diverse channels of information transfer of studies. The results of the investigation show that internet promotion via university and faculty website plays the dominant role but also direct promotion, such as opinion of older friends, is crucial. Furthermore, from year to year the analyses indicate the significant increase of official media and reveal that the prospective students rely on a few sources of information simultaneously.

Analysis of Knock Phenomenon Induced in a Constant Volume Chamber by Local Gas Temperature Measurement and Visualization

Science.gov (United States)

Moriyoshi, Yasuo; Kobayashi, Shigemi; Enomoto, Yoshiteru

Knock phenomenon in SI engines is regarded as an auto-ignition of unburned end-gas, and it has been widely examined by using rapid compression machines (RCM), shock-tubes or test engines. Recent researches point out the importance of the low temperature chemical reaction and the negative temperature coefficient (NTC). To investigate the effects, analyses of instantaneous local gas temperature, flow visualization and gaseous pressure were conducted in this study. As measurements using real engines are too difficult to analyze, the authors aimed to make measurements using a constant volume vessel under knock conditions where propagating flame exists during the induction time of auto-ignition. Adopting the two-wire thermocouple method enabled us to measure the instantaneous local gas temperature until the moment when the flame front passes by. High-speed images inside the unburned region were also recorded simultaneously using an endoscope. As a result, it was found that when knock occurs, the auto-ignition initiation time seems slightly early compared to the results without knock. This causes a higher volume ratio of unburned mixture and existence of many hot spots and stochastically leads to an initiation of knock.

Dynamic monitoring of compliant bodies impacting the water surface through local strain measurements

Science.gov (United States)

Panciroli, Riccardo; Biscarini, Chiara; Jannelli, Elio; Ubertini, Filippo; Ubertini, Stefano

2016-04-01

The understanding and the experimental characterization of the evolution of impulsive loading is crucial in several fields in structural, mechanical and ocean engineering, naval architecture and aerospace. In this regards, we developed an experimental methodology to reconstruct the deformed shape of compliant bodies subjected to impulsive loadings, as those encountered in water entry events, starting from a finite number of local strain measurements performed through Fiber Bragg Gratings. The paper discusses the potential applications of the proposed methodology for: i) real-time damage detection and structural health monitoring, ii) fatigue assessment and iii) impulsive load estimation.

Development of an instantaneous local fuel-concentration measurement probe: an engine application

Science.gov (United States)

Guibert, P.; Boutar, Z.; Lemoyne, L.

2003-11-01

This work presents a new tool which can deliver instantaneous local measurements of fuel concentration in an engine cylinder with a high temporal resolution, particularly during compression strokes. Fuel concentration is represented by means of equivalence fuel-air ratio, i.e. the real engine mass ratio of fuel to air divided by the same ratio in ideal stoichiometry conditions. Controlling the mixture configuration for any strategy in a spark ignition engine and for auto-ignition combustion has a dominant effect on the subsequent processes of ignition, flame propagation and auto-ignition combustion progression, pollutant formation under lean or even stoichiometric operating conditions. It is extremely difficult, under a transient operation, to control the equivalence air/fuel ratio precisely at a required value and at the right time. This requires the development of a highly accurate equivalence air/fuel ratio control system and a tool to measure using crank angle (CA) resolution. Although non-intrusive laser techniques have considerable advantages, they are most of the time inappropriate due to their optical inaccessibility or the complex experimental set-up involved. Therefore, as a response to the demand for a relatively simple fuel-concentration measurement system a probe is presented that replaces a spark plug and allows the engine to run completely normally. The probe is based on hot-wire like apparatus, but involves catalytic oxidation at the wire surface. The development, characteristics and calibration of the probe are presented followed by applications to in-cylinder engine measurements.

An Open Localization and Local Communication Embodied Sensor

Directory of Open Access Journals (Sweden)

Alvaro Gutiérrez

2008-11-01

Full Text Available In this paper we describe a localization and local communication system which allows situated agents to communicate locally, obtaining at the same time both the range and the bearing of the emitter without the need of any centralized control or any external reference. The system relies on infrared communications with frequency modulation and is composed of two interconnected modules for data and power measurement. Thanks to the open hardware license under which it is released, the research community can easily replicate the system at a low cost and/or adapt it for applications in sensor networks and in robotics.

Local Control in Action: Learning from the CORE Districts' Focus on Measurement, Capacity Building, and Shared Accountability. Policy Brief 16-4

Science.gov (United States)

Marsh, Julie; Bush-Mecenas, Susan; Hough, Heather

2016-01-01

California and the nation are at the crossroads of a major shift in school accountability policy. At the state level, California's Local Control and Accountability Plan (LCAP) encourages the use of multiple measures of school performance used locally to support continuous improvement and strategic resource allocation. Similarly, the federal Every…

Measurement of local blood flow and oxygen consumption in evolving irreversible cerebral infarction: an in vivo study in man

International Nuclear Information System (INIS)

Baron, J.C.; Rougemont, D.; Lebrun-Grandie, P.; Bousser, M.G.; Cabanis, E.; Bories, J.; Comar, D.; Castaigne, P.

1982-09-01

Positron emission tomography (PET) allows in vivo measurement of local cerebral blood flow (1CBF), oxygen consumption rate (1CMRO 2 ) and glucose utilisation (1CMRG1c) in man. Although 1CMRG1c is accessible in animals, this is not the case for 1CMRO 2 , an excellent index of local functional state. PET imaging of the local interrelationship of CBF and metabolism in completed ischemic stroke has attracted considerable interest because of its potential to differentiate irreversibly damaged from viable tissue on the basis of the CBF- metabolism patterns. Several qualitative or semi-quantitative pioneering studies provided a limited insight into this question, while the single truly quantitative study was only briefly reported. We report here a detailed study of the local CBF-CMRO 2 quantitative patterns in irreversibly infarcted brain regions

Local density measurement of additive manufactured copper parts by instrumented indentation

Science.gov (United States)

Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise; Tedde, Giovanni Matteo; Zarcone, Mariano; Di Domenico, Gildo; D'Angelo, Pierpaolo; Corona, Diego

2018-05-01

Instrumented flat indentation has been used to evaluate local density of additive manufactured (AM) copper samples with different relative density. Indentations were made by using tungsten carbide (WC) flat pins with 1 mm diameter. Pure copper powders were used in a selective laser melting (SLM) machine to produce samples to test. By changing process parameters, samples density was changed from the relative density of 63% to 71%. Indentation tests were performed on the xy surface of the AM samples. In order to make a correlation between indentation test results and sample density, the indentation pressure at fixed displacement was selected. Results show that instrumented indentation is a valid technique to measure density distribution along the geometry of an SLM part. In fact, a linear trend between indentation pressure and sample density was found for the selected density range.

Measurement of the local void fraction in two-phase air-water flow with a hot-film anemometer

International Nuclear Information System (INIS)

Delhaye, J.

1968-01-01

The experimental knowledge of the local void-fraction is basic for the derivation of the constitutive equations of two-phase flows. This report deals with measurements of the local void-fraction based on the use of a constant temperature hot-film anemometer associated with a multichannel analyser. After determining the void-fraction profile along a diameter of a vertical pipe (40 mm I.D.), in which air and water flow upwards, we compare the void-fraction averaged over the diameter with the average value measured directly by a γ-ray method. Two runs were made in bubble flow and a third in slug flow. The two methods give results in a good agreement especially for bubble flow. The void-fraction averaged over the cross-section was also calculated from the different profiles and compared in a good manner with the experimental results of R. ROUMY. For bubble flow we verified the theory of S.G. BANKOFF about the shape of the void-fraction profiles. (author) [fr

Introducing Anisotropic Minkowski Functionals and Quantitative Anisotropy Measures for Local Structure Analysis in Biomedical Imaging

Science.gov (United States)

Wismüller, Axel; De, Titas; Lochmüller, Eva; Eckstein, Felix; Nagarajan, Mahesh B.

2017-01-01

The ability of Minkowski Functionals to characterize local structure in different biological tissue types has been demonstrated in a variety of medical image processing tasks. We introduce anisotropic Minkowski Functionals (AMFs) as a novel variant that captures the inherent anisotropy of the underlying gray-level structures. To quantify the anisotropy characterized by our approach, we further introduce a method to compute a quantitative measure motivated by a technique utilized in MR diffusion tensor imaging, namely fractional anisotropy. We showcase the applicability of our method in the research context of characterizing the local structure properties of trabecular bone micro-architecture in the proximal femur as visualized on multi-detector CT. To this end, AMFs were computed locally for each pixel of ROIs extracted from the head, neck and trochanter regions. Fractional anisotropy was then used to quantify the local anisotropy of the trabecular structures found in these ROIs and to compare its distribution in different anatomical regions. Our results suggest a significantly greater concentration of anisotropic trabecular structures in the head and neck regions when compared to the trochanter region (p < 10−4). We also evaluated the ability of such AMFs to predict bone strength in the femoral head of proximal femur specimens obtained from 50 donors. Our results suggest that such AMFs, when used in conjunction with multi-regression models, can outperform more conventional features such as BMD in predicting failure load. We conclude that such anisotropic Minkowski Functionals can capture valuable information regarding directional attributes of local structure, which may be useful in a wide scope of biomedical imaging applications. PMID:29170580

Local difference measures between complex networks for dynamical system model evaluation.

Science.gov (United States)

Lange, Stefan; Donges, Jonathan F; Volkholz, Jan; Kurths, Jürgen

2015-01-01

A faithful modeling of real-world dynamical systems necessitates model evaluation. A recent promising methodological approach to this problem has been based on complex networks, which in turn have proven useful for the characterization of dynamical systems. In this context, we introduce three local network difference measures and demonstrate their capabilities in the field of climate modeling, where these measures facilitate a spatially explicit model evaluation.Building on a recent study by Feldhoff et al. [8] we comparatively analyze statistical and dynamical regional climate simulations of the South American monsoon system [corrected]. types of climate networks representing different aspects of rainfall dynamics are constructed from the modeled precipitation space-time series. Specifically, we define simple graphs based on positive as well as negative rank correlations between rainfall anomaly time series at different locations, and such based on spatial synchronizations of extreme rain events. An evaluation against respective networks built from daily satellite data provided by the Tropical Rainfall Measuring Mission 3B42 V7 reveals far greater differences in model performance between network types for a fixed but arbitrary climate model than between climate models for a fixed but arbitrary network type. We identify two sources of uncertainty in this respect. Firstly, climate variability limits fidelity, particularly in the case of the extreme event network; and secondly, larger geographical link lengths render link misplacements more likely, most notably in the case of the anticorrelation network; both contributions are quantified using suitable ensembles of surrogate networks. Our model evaluation approach is applicable to any multidimensional dynamical system and especially our simple graph difference measures are highly versatile as the graphs to be compared may be constructed in whatever way required. Generalizations to directed as well as edge- and node

X-ray digital industrial radiography (DIR) for local liquid velocity (V{sub LL}) measurement in trickle bed reactors (TBRs): Validation of the technique

Energy Technology Data Exchange (ETDEWEB)

Mohd Salleh, Khairul Anuar, E-mail: kmfgf@mst.edu; Lee, Hyoung Koo [Department of Mining and Nuclear Engineering, Missouri University of Science and Technology, Fulton Hall, 310 W. 14th St., Rolla, Missouri 65409 (United States); Rahman, Mohd Fitri Abdul [Department of Chemical and Biochemical Engineering, Missouri University of Science and Technology, 143 Schrenk Hall, 400 W. 11th St., Rolla, Missouri 65409 (United States); Al Dahhan, Muthanna H. [Department of Mining and Nuclear Engineering, Missouri University of Science and Technology, Fulton Hall, 310 W. 14th St., Rolla, Missouri 65409 (United States); Department of Chemical and Biochemical Engineering, Missouri University of Science and Technology, 143 Schrenk Hall, 400 W. 11th St., Rolla, Missouri 65409 (United States)

2014-06-15

Local liquid velocity measurements in Trickle Bed Reactors (TBRs) are one of the essential components in its hydrodynamic studies. These measurements are used to effectively determine a reactor's operating condition. This study was conducted to validate a newly developed technique that combines Digital Industrial Radiography (DIR) with Particle Tracking Velocimetry (PTV) to measure the Local Liquid Velocity (V{sub LL}) inside TBRs. Three millimeter-sized Expanded Polystyrene (EPS) beads were used as packing material. Three validation procedures were designed to test the newly developed technique. All procedures and statistical approaches provided strong evidence that the technique can be used to measure the V{sub LL} within TBRs.

The Discrete Wavelet Transform and Its Application for Noise Removal in Localized Corrosion Measurements

Directory of Open Access Journals (Sweden)

Rogelio Ramos

2017-01-01

Full Text Available The present work discusses the problem of induced external electrical noise as well as its removal from the electrical potential obtained from Scanning Vibrating Electrode Technique (SVET in the pitting corrosion process of aluminum alloy A96061 in 3.5% NaCl. An accessible and efficient solution of this problem is presented with the use of virtual instrumentation (VI, embedded systems, and the discrete wavelet transform (DWT. The DWT is a computational algorithm for digital processing that allows obtaining electrical noise with Signal to Noise Ratio (SNR superior to those obtained with Lock-In Amplifier equipment. The results show that DWT and the threshold method are efficient and powerful alternatives to carry out electrical measurements of potential signals from localized corrosion processes measured by SVET.

An adaptive scheme for robot localization and mapping with dynamically configurable inter-beacon range measurements.

Science.gov (United States)

Torres-González, Arturo; Martinez-de Dios, Jose Ramiro; Ollero, Anibal

2014-04-25

This work is motivated by robot-sensor network cooperation techniques where sensor nodes (beacons) are used as landmarks for range-only (RO) simultaneous localization and mapping (SLAM). This paper presents a RO-SLAM scheme that actuates over the measurement gathering process using mechanisms that dynamically modify the rate and variety of measurements that are integrated in the SLAM filter. It includes a measurement gathering module that can be configured to collect direct robot-beacon and inter-beacon measurements with different inter-beacon depth levels and at different rates. It also includes a supervision module that monitors the SLAM performance and dynamically selects the measurement gathering configuration balancing SLAM accuracy and resource consumption. The proposed scheme has been applied to an extended Kalman filter SLAM with auxiliary particle filters for beacon initialization (PF-EKF SLAM) and validated with experiments performed in the CONET Integrated Testbed. It achieved lower map and robot errors (34% and 14%, respectively) than traditional methods with a lower computational burden (16%) and similar beacon energy consumption.

Using Social Cognitive Theory to Explain the Intention of Final-year Pharmacy Students to Undertake a Higher Degree in Pharmacy Practice Research.

Science.gov (United States)

Carter, Stephen R; Moles, Rebekah J; Krass, Ines; Kritikos, Vicki S

2016-08-25

Objective. To develop and test a conceptual model that hypothesized student intention to undertake a higher degree in pharmacy practice research (PPR) would be increased by self-efficacy, outcome expectancy, and the social influence of faculty members. Methods. Cross-sectional surveys were completed by 387 final-year pharmacy undergraduates enrolled in 2012 and 2013. Structural equation modeling was used to explore relationships between variables and intention. Results. Fit indices were good. The model explained 55% of the variation in intention. As hypothesized, faculty social influence increased self-efficacy and indirectly increased outcome expectancy and intention. Conclusion. To increase pharmacy students' orientation towards a career in PPR, faculty members could use their social influence by highlighting PPR in their teaching.

ABSCISSA ASSESSMENT WITH ALGAE: A COMPARISON OF LOCAL AND LANDSCAPE IMPAIRMENT MEASURES FOR BIOLOGICAL ASSESSMENT USING BENTHIC DIATOMS

Science.gov (United States)

The development of rigorous biological assessments is dependent upon well-constructed abscissa, and various methods, both subjective and objective, exist to measure expected impairment at both the landscape and local scale. A new, landscape-scale method has recently been offered...

Localization of Non-Linearly Modeled Autonomous Mobile Robots Using Out-of-Sequence Measurements

Directory of Open Access Journals (Sweden)

Jesus M. de la Cruz

2012-02-01

Full Text Available This paper presents a state of the art of the estimation algorithms dealing with Out-of-Sequence (OOS measurements for non-linearly modeled systems. The state of the art includes a critical analysis of the algorithm properties that takes into account the applicability of these techniques to autonomous mobile robot navigation based on the fusion of the measurements provided, delayed and OOS, by multiple sensors. Besides, it shows a representative example of the use of one of the most computationally efficient approaches in the localization module of the control software of a real robot (which has non-linear dynamics, and linear and non-linear sensors and compares its performance against other approaches. The simulated results obtained with the selected OOS algorithm shows the computational requirements that each sensor of the robot imposes to it. The real experiments show how the inclusion of the selected OOS algorithm in the control software lets the robot successfully navigate in spite of receiving many OOS measurements. Finally, the comparison highlights that not only is the selected OOS algorithm among the best performing ones of the comparison, but it also has the lowest computational and memory cost.

Importance weighting of local flux measurements to improve reactivity predictions in nuclear systems

Energy Technology Data Exchange (ETDEWEB)

Dulla, Sandra; Hoh, Siew Sin; Nervo, Marta; Ravetto, Piero [Politecnico di Torino, Dipt. Energia (Italy)

2015-07-15

The reactivity monitoring is a key aspect for the safe operation of nuclear reactors, especially for subcritical source-driven systems. Various methods are available for both, off-line and on-line reactivity determination from direct measurements carried out on the reactor. Usually the methods are based on the inverse point kinetic model applied to signals from neutron detectors and results may be severely affected by space and spectral effects. Such effects need to be compensated and correction procedures have to be applied. In this work, a new approach is proposed, by using the full information from different local measurements to generate a global signal through a proper weighting of the signals provided by single neutron detectors. A weighting techique based on the use of the adjoint flux proves to be efficient in improving the prediction capability of inverse techniques. The idea is applied to the recently developed algorithm, named MAρTA, that can be used in both off-line and online modes.

Improved electrode positions for local impedance measurements in the lung-a simulation study.

Science.gov (United States)

Orschulik, Jakob; Petkau, Rudolf; Wartzek, Tobias; Hochhausen, Nadine; Czaplik, Michael; Leonhardt, Steffen; Teichmann, Daniel

2016-12-01

Impedance spectroscopy can be used to analyze the dielectric properties of various materials. In the biomedical domain, it is used as bioimpedance spectroscopy (BIS) to analyze the composition of body tissue. Being a non-invasive, real-time capable technique, it is a promising modality, especially in the field of lung monitoring. Unfortunately, up to now, BIS does not provide any regional lung information as the electrodes are usually placed in hand-to-hand or transthoracic configurations. Even though transthoracic electrode configurations are in general capable of monitoring the lung, no focusing to specific regions is achieved. In order to resolve this issue, we use a finite element model (FEM) of the human body to study the effect of different electrode configurations on measured BIS data. We present evaluation results and show suitable electrode configurations for eight lung regions. We show that, using these optimized configurations, BIS measurements can be focused to desired regions allowing local lung analysis.

Actions Environmental Sustainability Measures for Producers and Local Communities in a Coastal Area

Directory of Open Access Journals (Sweden)

María Elena Zequeira-Álvarez

2017-06-01

Full Text Available In this work, the area of study is defined as the producers and communities of the northern coastal zone, up to the 5-meter level curve of the province of Camagüey, Cuba. It is composed of four municipalities and is very rich in natural values but also identifies itself as a very fragile ecosystem. The methodological procedure consists of three stages that respond to their respective objectives: General characteristics of the study area, environmental problems in the area of study and general measures of sustainability for producers and coastal communities, The general objective of the work is to propose general measures of Environmental sustainability for producers and local communities in the northern coastal zone of Camagüey, Cuba in order to contribute to the use and conservation of the ecosystem. These are aimed at the producers and settlers of the study area but may be interesting for other ecosystems.

Combining complexity measures of EEG data: multiplying measures reveal previously hidden information.

Science.gov (United States)

Burns, Thomas; Rajan, Ramesh

2015-01-01

Many studies have noted significant differences among human electroencephalograph (EEG) results when participants or patients are exposed to different stimuli, undertaking different tasks, or being affected by conditions such as epilepsy or Alzheimer's disease. Such studies often use only one or two measures of complexity and do not regularly justify their choice of measure beyond the fact that it has been used in previous studies. If more measures were added to such studies, however, more complete information might be found about these reported differences. Such information might be useful in confirming the existence or extent of such differences, or in understanding their physiological bases. In this study we analysed publically-available EEG data using a range of complexity measures to determine how well the measures correlated with one another. The complexity measures did not all significantly correlate, suggesting that different measures were measuring unique features of the EEG signals and thus revealing information which other measures were unable to detect. Therefore, the results from this analysis suggests that combinations of complexity measures reveal unique information which is in addition to the information captured by other measures of complexity in EEG data. For this reason, researchers using individual complexity measures for EEG data should consider using combinations of measures to more completely account for any differences they observe and to ensure the robustness of any relationships identified.

Measurements and non-local thermodynamic equilibrium modeling of mid-Z plasma emission

International Nuclear Information System (INIS)

Jacquet, L.; Primout, M.; Kaiser, P.; Clouët, J. F.; Girard, F.; Villette, B.; Reverdin, C.; Oudot, G.

2015-01-01

The x-ray yields from laser-irradiated thin foils of iron, copper, zinc, and germanium have been measured in the soft and multi-keV x-ray ranges at the OMEGA laser at the Laboratory for Laser Energetics. The incident laser power had a pre-pulse to enhance the x-ray emission of a 1 ns flat-top main pulse. The experimental results have been compared with post-shot simulations performed with the two-dimensional radiation-hydrodynamics code FCI2. A new non-local thermodynamic equilibrium model, NOO-RAD, have been incorporated into FCI2. In this approach, the plasma ionization state is in-line calculated by the atomic physics NOHEL package. In the soft x-ray bands, both simulations using RADIOM [M. Busquet, Phys. Fluids B 5, 4191 (1993)] and NOO-RAD clearly over-predict the powers and energies measured by a broad-band spectrometer. In one case (the iron foil), the discrepancy between the measured and simulated x-ray output is nevertheless significantly reduced when NOO-RAD is used in the simulations. In the multi-keV x-ray bands, the simulations display a strong sensitivity to the coupling between the electron thermal conductivity and the NLTE models, and for some particular combinations of these, provide a close match to the measured emission. The comparison between the measured and simulated H-like to He-like line-intensity ratios deduced from high-resolution spectra indicates higher experimental electron temperatures were achieved, compared to the simulated ones. Measurements of the plasma conditions have been achieved using the Thomson-scattering diagnostic. The electron temperatures are found to range from 3 to 5 keV at the end of the laser pulse and are greater than predicted by the simulations. The measured flow velocities are in reasonable agreement with the calculated ones. This last finding gives us confidence in our numerical predictions for the plasma parameters, which are over that time mainly determined by hydrodynamics, such as the mass densities and

Measurements and non-local thermodynamic equilibrium modeling of mid-Z plasma emission

Science.gov (United States)

Jacquet, L.; Primout, M.; Kaiser, P.; Clouët, J. F.; Girard, F.; Villette, B.; Reverdin, C.; Oudot, G.

2015-12-01

The x-ray yields from laser-irradiated thin foils of iron, copper, zinc, and germanium have been measured in the soft and multi-keV x-ray ranges at the OMEGA laser at the Laboratory for Laser Energetics. The incident laser power had a pre-pulse to enhance the x-ray emission of a 1 ns flat-top main pulse. The experimental results have been compared with post-shot simulations performed with the two-dimensional radiation-hydrodynamics code FCI2. A new non-local thermodynamic equilibrium model, NOO-RAD, have been incorporated into FCI2. In this approach, the plasma ionization state is in-line calculated by the atomic physics NOHEL package. In the soft x-ray bands, both simulations using RADIOM [M. Busquet, Phys. Fluids B 5, 4191 (1993)] and NOO-RAD clearly over-predict the powers and energies measured by a broad-band spectrometer. In one case (the iron foil), the discrepancy between the measured and simulated x-ray output is nevertheless significantly reduced when NOO-RAD is used in the simulations. In the multi-keV x-ray bands, the simulations display a strong sensitivity to the coupling between the electron thermal conductivity and the NLTE models, and for some particular combinations of these, provide a close match to the measured emission. The comparison between the measured and simulated H-like to He-like line-intensity ratios deduced from high-resolution spectra indicates higher experimental electron temperatures were achieved, compared to the simulated ones. Measurements of the plasma conditions have been achieved using the Thomson-scattering diagnostic. The electron temperatures are found to range from 3 to 5 keV at the end of the laser pulse and are greater than predicted by the simulations. The measured flow velocities are in reasonable agreement with the calculated ones. This last finding gives us confidence in our numerical predictions for the plasma parameters, which are over that time mainly determined by hydrodynamics, such as the mass densities and the

Measurements and non-local thermodynamic equilibrium modeling of mid-Z plasma emission

Energy Technology Data Exchange (ETDEWEB)

Jacquet, L., E-mail: laurent.jacquet@cea.fr; Primout, M.; Kaiser, P.; Clouët, J. F.; Girard, F.; Villette, B.; Reverdin, C.; Oudot, G. [CEA, DAM, DIF, F-91297 Arpajon (France)

2015-12-15

The x-ray yields from laser-irradiated thin foils of iron, copper, zinc, and germanium have been measured in the soft and multi-keV x-ray ranges at the OMEGA laser at the Laboratory for Laser Energetics. The incident laser power had a pre-pulse to enhance the x-ray emission of a 1 ns flat-top main pulse. The experimental results have been compared with post-shot simulations performed with the two-dimensional radiation-hydrodynamics code FCI2. A new non-local thermodynamic equilibrium model, NOO-RAD, have been incorporated into FCI2. In this approach, the plasma ionization state is in-line calculated by the atomic physics NOHEL package. In the soft x-ray bands, both simulations using RADIOM [M. Busquet, Phys. Fluids B 5, 4191 (1993)] and NOO-RAD clearly over-predict the powers and energies measured by a broad-band spectrometer. In one case (the iron foil), the discrepancy between the measured and simulated x-ray output is nevertheless significantly reduced when NOO-RAD is used in the simulations. In the multi-keV x-ray bands, the simulations display a strong sensitivity to the coupling between the electron thermal conductivity and the NLTE models, and for some particular combinations of these, provide a close match to the measured emission. The comparison between the measured and simulated H-like to He-like line-intensity ratios deduced from high-resolution spectra indicates higher experimental electron temperatures were achieved, compared to the simulated ones. Measurements of the plasma conditions have been achieved using the Thomson-scattering diagnostic. The electron temperatures are found to range from 3 to 5 keV at the end of the laser pulse and are greater than predicted by the simulations. The measured flow velocities are in reasonable agreement with the calculated ones. This last finding gives us confidence in our numerical predictions for the plasma parameters, which are over that time mainly determined by hydrodynamics, such as the mass densities and

Strain rate measurement by Electronic Speckle Pattern Interferometry: A new look at the strain localization onset

International Nuclear Information System (INIS)

Guelorget, Bruno; Francois, Manuel; Vial-Edwards, Cristian; Montay, Guillaume; Daniel, Laurent; Lu, Jian

2006-01-01

In-plane Electronic Speckle Pattern Interferometry has been successfully used during tensile testing of semi-hard copper sheets in order to measure the strain rate. On one hand, heterogeneity in strain rate field has been found before the maximum of the tensile force (ε t ≅ 19.4 and 25.4%, respectively). Thus, a localization phenomenon occurs before the classic Considere's criterion (dF = 0) for the diffuse neck initiation. On the other hand, strain rate measurement before fracture shows the moment where one of the two slip band systems becomes predominant, then strain concentrates in a small area, the shear band. Uncertainty evaluation has been carried out, which shows a very good accuracy of the total strain and the strain rate measurements

Strain rate measurement by Electronic Speckle Pattern Interferometry: A new look at the strain localization onset

Energy Technology Data Exchange (ETDEWEB)

Guelorget, Bruno [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)]. E-mail: bruno.guelorget@utt.fr; Francois, Manuel [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Vial-Edwards, Cristian [Departemento de Ingenieria Mecanica y Metalurgica, Pontificia Universidad Catolica de Chile, Vicuna Mackenna 4860, 6904411 Santiago (Chile); Montay, Guillaume [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Daniel, Laurent [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Lu, Jian [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)

2006-01-15

In-plane Electronic Speckle Pattern Interferometry has been successfully used during tensile testing of semi-hard copper sheets in order to measure the strain rate. On one hand, heterogeneity in strain rate field has been found before the maximum of the tensile force ({epsilon} {sup t} {approx_equal} 19.4 and 25.4%, respectively). Thus, a localization phenomenon occurs before the classic Considere's criterion (dF = 0) for the diffuse neck initiation. On the other hand, strain rate measurement before fracture shows the moment where one of the two slip band systems becomes predominant, then strain concentrates in a small area, the shear band. Uncertainty evaluation has been carried out, which shows a very good accuracy of the total strain and the strain rate measurements.

Measuring localized nonlinear components in a circular accelerator with a nonlinear tune response matrix

Directory of Open Access Journals (Sweden)

G. Franchetti

2008-09-01

Full Text Available In this paper we present a method for measuring the nonlinear errors in a circular accelerator by taking advantage of the feed-down effect of high order multipoles when the closed orbit is globally deformed. We devise a nonlinear tune response matrix in which the response to a closed orbit deformation is obtained in terms of change of machine tune and correlated with the strength of the local multipoles. A numerical example and a proof of principle experiment to validate the theoretical methods are presented and discussed.

Damage measurement of structural material by electron backscatter diffraction. Quantification of measurement quality toward standardization of measurement procedure

International Nuclear Information System (INIS)

Kamaya, Masayuki

2011-01-01

Several attempts have been made to assess the damage induced in materials by crystal orientation distributions identified using electron backscatter diffraction (EBSD). In particular, the local misorientation, which is the misorientation between neighboring measurement points, was shown to correlate well with the degree of material damage such as plastic strain, fatigue and creep. However, the damage assessments conducted using the local misorientations were qualitative rather than quantitative. The local misorientation can be correlated theoretically with physical parameters such as dislocation density. However, the error in crystal orientation measurements makes quantitative evaluation of the local misorientation difficult. Furthermore, the local misorientation depends on distance between the measurement points (step size). For a quantitative assessment of the local misorientation, the error in the crystal orientation measurements must be reduced or the degree of error must be shown quantitatively. In this study, first, the influence of the quality of measurements (accuracy of measurements) and step size on the local misorientation was investigated using stainless steel specimens damaged by tensile deformation or fatigue. By performing the crystal orientation measurements with different conditions, it was shown that the quality of measurement could be represented by the error index, which was previously proposed by the author. Secondly, a filtering process was applied in order to improve the accuracy of crystal orientation measurements and its effect was investigated using the error index. It was revealed that the local misorientations obtained under different measurement conditions could be compared quantitatively only when the error index and the step size were almost or exactly the same. It was also shown that the filtering process could successfully reduce the measurement error and step size dependency of the local misorientations. By applying the filtering

Banyule unlocks local water

International Nuclear Information System (INIS)

Collins, Richard

2014-01-01

Banyule Council, Victoria has launched one of Melbourne's biggest stormwater harvesting schemes. After the Millenium Drought in the early 2000s, ratepayers and the community alike prompted the council to undertake a detailed water management study to improve water options for the many reserves and parklands. They launched three projects, with differing technical site issues, using such designs as gross pollutant traps, sediment ponds, bio-filtration, wetlands, and underground storage using waterproof geomembrane liners.

Propellant Slosh Force and Mass Measurement

Directory of Open Access Journals (Sweden)

Andrew Hunt

2018-01-01

Full Text Available We have used electrical capacitance tomography (ECT to instrument a demonstration tank containing kerosene and have successfully demonstrated that ECT can, in real time, (i measure propellant mass to better than 1% of total in a range of gravity fields, (ii image propellant distribution, and (iii accurately track propellant centre of mass (CoM. We have shown that the ability to track CoM enables the determination of slosh forces, and we argue that this will result in disruptive changes in a propellant tank design and use in a spacecraft. Ground testing together with real-time slosh force data will allow an improved tank design to minimize and mitigate slosh forces, while at the same time keeping the tank mass to a minimum. Fully instrumented Smart Tanks will be able to provide force vector inputs to a spacecraft inertial navigation system; this in turn will (i eliminate or reduce navigational errors, (ii reduce wait time for uncertain slosh settling, since actual slosh forces will be known, and (iii simplify slosh control hardware, hence reducing overall mass. ECT may be well suited to space borne liquid measurement applications. Measurements are independent of and unaffected by orientation or levels of g. The electronics and sensor arrays can be low in mass, and critically, the technique does not dissipate heat into the propellant, which makes it intrinsically safe and suitable for cryogenic liquids. Because of the limitations of operating in earth-bound gravity, it has not been possible to check the exact numerical accuracy of the slosh force acting on the vessel. We are therefore in the process of undertaking a further project to (i build a prototype integrated “Smart Tank for Space”, (ii undertake slosh tests in zero or microgravity, (iii develop the system for commercial ground testing, and (iv qualify ECT for use in space.

Measuring and Modeling the Earth's Gravity - Introduction to Ground-Based Gravity Surveys and Analysis of Local Gravity Data

Energy Technology Data Exchange (ETDEWEB)

Rowe, Charlotte Anne [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-21

We can measure changes in gravity from place to place on the earth. These measurements require careful recording of location, elevation and time for each reading. These readings must be adjusted for known effects (such as elevation, latitude, tides) that can bias our data and mask the signal of interest. After making corrections to our data, we can remove regional trends to obtain local Bouguer anomalies. The Bouguer anomalies arise from variations in the subsurface density structure. We can build models to explain our observations, but these models must be consistent with what is known about the local geology. Combining gravity models with other information – geologic, seismic, electromagnetic, will improve confidence in the results.

The home as an appropriate setting for women undertaking cervical ripening before the induction of labour.

Science.gov (United States)

Reid, Margaret; Lorimer, Karen; Norman, Jane E; Bollapragada, Shrikant S; Norrie, John

2011-02-01

to explore women's experiences of cervical ripening using isosorbide mononitrate (IMN) in the home as part of the main randomised controlled trial. qualitative study with semi-structured interviews carried out at three weeks post partum. Interview transcripts were analysed to identify recurrent themes, focusing on why women became involved in the study, their views about both the self-medication and the home setting, and whether they would repeat the experience. the home. twenty women enrolled in the main randomised controlled trial. the study is part of a double-blind randomised controlled trial with 350 patients investigating whether a nitric oxide donor (IMN) used in cervical ripening improves the process of induction of labour. women liked the opportunity to remain at home during the cervical ripening process. Timing and setting were central issues; women hoped that it would hasten labour, while the home was seen as a setting offering freedom, security and reassurance, as opposed to the hospital, seen as constraining. Two women reported problems with IMN but the remainder reported that they would repeat the experience. women were very positive about the opportunity to undertake cervical ripening at home. It is important to explore this setting further for appropriate interventions. Copyright © 2009 Elsevier Ltd. All rights reserved.

Chinese Anti-Cancer Association as a non-governmental organization undertakes systematic cancer prevention work in China

Science.gov (United States)

2015-01-01

Cancer has become the first leading cause of death in the world, particularly in low- and middle-income countries. Facing the increasing trend of cancer incidence and mortality, China issued and implemented “three-early (early prevention, early diagnosis and early treatment)” national cancer prevention plan. As the main body and dependence of social governance, non-governmental organizations (NGOs) take over the role of government in the field of cancer prevention and treatment. American Cancer Society (ACS) made a research on cancer NGOs and civil society in cancer control and found that cancer NGOs in developing countries mobilize civil society to work together and advocate governments in their countries to develop policies to address the growing cancer burden. Union for International Cancer Control (UICC), Cancer Council Australia (CCA), and Malaysian cancer NGOs are the representatives of cancer NGOs in promoting cancer control. Selecting Chinese Anti-Cancer Association (CACA) as an example in China, this article is to investigate how NGOs undertake systematic cancer prevention work in China. By conducting real case study, we found that, as a NGO, CACA plays a significant role in intensifying the leading role of government in cancer control, optimizing cancer outcomes, decreasing cancer incidence and mortality rates and improving public health. PMID:26361412

Interest and limits of microwaves thermographic measurements for the diagnosis and pronostic of local acute exposure in the pig

International Nuclear Information System (INIS)

Daburon, F.; Lefaix, J.L.; Remy, J.; Fayart, G.; Tricaud, Y.

1985-01-01

Microwaves thermographic measurements were carried out on 30 pigs following local exposure of the thigh by a collimated source of iridium 192 at doses ranging between 30 and 84 Gy (2 cm depth dose). Measurement and data processing methods were developed both qualitatively (thermographic images vs anatomo-clinical evolution of the lesions) and quantitatively (by means of indexes calculated from the rough thermographic data to evaluate the relations between the intensity of the local thermic reaction and the applied dose or dose rate). Beside the diagnostic value of the method, which accounts for the global radiological injuries better than the physical dose really distributed, its pronostic value -much more reliable- makes it possible to estimate the severity of the injuries and their later evolution very early (between 10 and 15 days) [fr

The Recent Performance of the Traditional Measure of Core Inflation in G7 Countries

OpenAIRE

Luciana Lo Bue; Antonio Ribba

2009-01-01

In this paper we undertake an empirical investigation concerning the performance of the traditional measure of core inflation in recent years. We consider the group of G7 countries and explore both the high-frequency and the low-frequency relations between overall inflation and core inflation. We find that the traditional core measure, obtained by subtracting from the overall index those components which exhibit high volatility and which are responsible for the short-run variability of inflat...

In Situ Local Contact Angle Measurement in a CO2-Brine-Sand System Using Microfocused X-ray CT.

Science.gov (United States)

Lv, Pengfei; Liu, Yu; Wang, Zhe; Liu, Shuyang; Jiang, Lanlan; Chen, Junlin; Song, Yongchen

2017-04-11

The wettability of porous media is of major interest in a broad range of natural and engineering applications. The wettability of a fluid on a solid surface is usually evaluated by the contact angle between them. While in situ local contact angle measurements are complicated by the topology of porous media, which can make it difficult to use traditional methods, recent advances in microfocused X-ray computed tomography (micro-CT) and image processing techniques have made it possible to measure contact angles on the scale of the pore sizes in such media. However, the effects of ionic strength, CO 2 phase, and flow pattern (drainage or imbibition) on pore-scale contact angle distribution are still not clear and have not been reported in detail in previous studies. In this study, we employed a micro-CT scanner for in situ investigation of local contact angles in a CO 2 -brine-sand system under various conditions. The effects of ionic strength, CO 2 phase, and flow pattern on the local contact-angle distribution were examined in detail. The results showed that the local contact angles vary over a wide range as a result of the interaction of surface contaminants, roughness, pore topology, and capillarity. The wettability of a porous surface could thus slowly weaken with increasing ionic strength, and the average contact angle could significantly increase when gaseous CO 2 (gCO 2 ) turns into supercritical CO 2 (scCO 2 ). Contact angle hysteresis also occurred between drainage and imbibition procedures, and the hysteresis was more significant under gCO 2 condition.

Measurement of Localized Corrosion Rates at Inclusion Particles in AA7075 by In Situ Three Dimensional (3D) X-ray Synchrotron Tomography

Energy Technology Data Exchange (ETDEWEB)

Singh, Sudhanshu S.; Williams, Jason J.; Stannard, Tyler J.; Xiao, Xianghui; De Carlo, Francesco; Chawla, Nikhilesh

2016-03-01

In situ X-ray synchrotron tomography was used to measure the localized corrosion rate of Mg2Si particles present in 7075 aluminum alloys in deionized ultra-filtered (DIUF) water. The evolution of hydrogen bubbles was captured as a function of time and the measured volume was used to calculate the local corrosion rate of Mg2Si particles. It was shown that in the absence of chloride ions, stress was needed to create fresh particle surfaces, either by fracture or debonding, to initiate corrosion at the particles.

The Experimental Measurement of Local and Bulk Oxygen Transport Resistances in the Catalyst Layer of Proton Exchange Membrane Fuel Cells.

Science.gov (United States)

Wang, Chao; Cheng, Xiaojing; Lu, Jiabin; Shen, Shuiyun; Yan, Xiaohui; Yin, Jiewei; Wei, Guanghua; Zhang, Junliang

2017-12-07

Remarkable progress has been made in reducing the cathodic Pt loading of PEMFCs; however, a huge performance loss appears at high current densities, indicating the existence of a large oxygen transport resistance associated with the ultralow Pt loading catalyst layer. To reduce the Pt loading without sacrificing cell performance, it is essential to illuminate the oxygen transport mechanism in the catalyst layer. Toward this goal, an experimental approach to measure the oxygen transport resistance in catalyst layers is proposed and realized for the first time in this study. The measuring approach involves a dual-layer catalyst layer design, which consists of a dummy catalyst layer and a practical catalyst layer, followed by changing the thickness of dummy layer to respectively quantify the local and bulk resistances via limiting current measurements combined with linear extrapolation. The experimental results clearly reveal that the local resistance dominates the total resistance in the catalyst layer.

Measuring the interactions between different locations in a muscle to monitor localized muscle fatigue.

Science.gov (United States)

Bingham, Adrian; Arjunan, Sridhar P; Kumar, Dinesh K

2017-07-01

In this study we investigated a technique for estimating the progression of localized muscle fatigue. This technique measures the dependence between motor units using high density surface electromyogram (HD-sEMG) and is based on the Normalized Mutual Information (NMI) measure. The NMI between every pair combination of the electrode array is computed to measure the interactions between electrodes. Participants in the experiment had an array of 64 electrodes (16 by 4) placed over the TA of their dominate leg such that the columns of the array ran parallel with the muscle fibers. The HD-sEMG was recorded whilst the participants maintained an isometric dorsiflexion with their dominate foot until task failure at 40% and 80% of their maximum voluntary contraction (MVC). The interactions between different locations over the muscle were computed using the recorded HD-sEMG signals. The results show that the average interactions between various locations over the TA significantly increased during fatigue at both levels of contraction. This can be attributed to the dependence in the motor units.

A near-optimal low complexity sensor fusion technique for accurate indoor localization based on ultrasound time of arrival measurements from low-quality sensors

Science.gov (United States)

Mitilineos, Stelios A.; Argyreas, Nick D.; Thomopoulos, Stelios C. A.

2009-05-01

A fusion-based localization technique for location-based services in indoor environments is introduced herein, based on ultrasound time-of-arrival measurements from multiple off-the-shelf range estimating sensors which are used in a market-available localization system. In-situ field measurements results indicated that the respective off-the-shelf system was unable to estimate position in most of the cases, while the underlying sensors are of low-quality and yield highly inaccurate range and position estimates. An extensive analysis is performed and a model of the sensor-performance characteristics is established. A low-complexity but accurate sensor fusion and localization technique is then developed, which consists inof evaluating multiple sensor measurements and selecting the one that is considered most-accurate based on the underlying sensor model. Optimality, in the sense of a genie selecting the optimum sensor, is subsequently evaluated and compared to the proposed technique. The experimental results indicate that the proposed fusion method exhibits near-optimal performance and, albeit being theoretically suboptimal, it largely overcomes most flaws of the underlying single-sensor system resulting in a localization system of increased accuracy, robustness and availability.

Barriers for domestic surrogacy and challenges of transnational surrogacy in the context of Australians undertaking surrogacy in India.

Science.gov (United States)

Johnson, Louise; Blyth, Eric; Hammarberg, Karin

2014-09-01

The ethical, social, psychological, legal and financial complexities associated with cross-border travel for reproductive services are gaining attention internationally. Travel abroad for surrogacy, and the transfer of gametes or embryos between countries for use in a surrogacy arrangement, can create conflict in relation to the rights of the parties involved: commissioning parents, surrogates and their families, gamete and embryo donors, and children born as a result of the arrangement. Australian surrogacy laws are restrictive and limit access to domestic surrogacy. Despite the introduction of laws in some Australian jurisdictions that penalise residents entering into international commercial surrogacy arrangements, hundreds of Australians resort to surrogacy arrangements in India and other countries each year. This article discusses legislation, policy and practice as they relate to Australians' use of surrogacy in India. It reviews current surrogacy-related legislation and regulation in Australia and India and existing evidence about the challenges posed by transnational surrogacy, and considers how restrictive Australian legislation may contribute to the number of Australians undertaking surrogacy in India.

Exploring the role of social interactions and supports in overcoming accessibility barriers while undertaking health tours in India.

Science.gov (United States)

Jana, Arnab; Harata, Noboru; Kiyoshi, Takami; Ohmori, Nobuaki

2014-01-01

This article explores the phenomenon of companionship as an adaptation strategy to counter the existing barriers to health care access in developing nations. Companionship is argued to be an outcome of "inter" and "intra" household collaboration to offer diverse supports in addition to altruism. The analysis of the household survey conducted in West Bengal, India, exhibited different patterns of health care tours and the associated dependencies. In addition to support in terms of mobility while traveling and companionship while waiting for the opportunity, support in terms of refuge is also found to be essential, especially for the poor while they undertake regional tours. Causal models focusing on aggregated general health tours and specific regional tours were estimated separately to comprehend the implicit social interactions and their effects on the patient as well as the companions. The research demonstrated that accessibility barriers affect not only the ill, but also those associated with them and at times adversely. Segregation of regional tours illustrated the gaps, which instigated such tours and also might aid in health infrastructure planning as a whole.

Constraints on inflation revisited. An analysis including the latest local measurement of the Hubble constant

Energy Technology Data Exchange (ETDEWEB)

Guo, Rui-Yun [Northeastern University, Department of Physics, College of Sciences, Shenyang (China); Zhang, Xin [Northeastern University, Department of Physics, College of Sciences, Shenyang (China); Peking University, Center for High Energy Physics, Beijing (China)

2017-12-15

We revisit the constraints on inflation models by using the current cosmological observations involving the latest local measurement of the Hubble constant (H{sub 0} = 73.00 ± 1.75 km s{sup -1} Mpc{sup -1}). We constrain the primordial power spectra of both scalar and tensor perturbations with the observational data including the Planck 2015 CMB full data, the BICEP2 and Keck Array CMB B-mode data, the BAO data, and the direct measurement of H{sub 0}. In order to relieve the tension between the local determination of the Hubble constant and the other astrophysical observations, we consider the additional parameter N{sub eff} in the cosmological model. We find that, for the ΛCDM+r+N{sub eff} model, the scale invariance is only excluded at the 3.3σ level, and ΔN{sub eff} > 0 is favored at the 1.6σ level. Comparing the obtained 1σ and 2σ contours of (n{sub s},r) with the theoretical predictions of selected inflation models, we find that both the convex and the concave potentials are favored at 2σ level, the natural inflation model is excluded at more than 2σ level, the Starobinsky R{sup 2} inflation model is only favored at around 2σ level, and the spontaneously broken SUSY inflation model is now the most favored model. (orig.)

Exploring Localization in Nuclear Spin Chains

Science.gov (United States)

Wei, Ken Xuan; Ramanathan, Chandrasekhar; Cappellaro, Paola

2018-02-01

Characterizing out-of-equilibrium many-body dynamics is a complex but crucial task for quantum applications and understanding fundamental phenomena. A central question is the role of localization in quenching thermalization in many-body systems and whether such localization survives in the presence of interactions. Probing this question in real systems necessitates the development of an experimentally measurable metric that can distinguish between different types of localization. While it is known that the localized phase of interacting systems [many-body localization (MBL)] exhibits a long-time logarithmic growth in entanglement entropy that distinguishes it from the noninteracting case of Anderson localization (AL), entanglement entropy is difficult to measure experimentally. Here, we present a novel correlation metric, capable of distinguishing MBL from AL in high-temperature spin systems. We demonstrate the use of this metric to detect localization in a natural solid-state spin system using nuclear magnetic resonance (NMR). We engineer the natural Hamiltonian to controllably introduce disorder and interactions, and observe the emergence of localization. In particular, while our correlation metric saturates for AL, it slowly keeps increasing for MBL, demonstrating analogous features to entanglement entropy, as we show in simulations. Our results show that our NMR techniques, akin to measuring out-of-time correlations, are well suited for studying localization in spin systems.

Magnetic susceptibility measurements of σ plutonium alloys. Contribution to the study of the 5f electrons localization in the plutonium

International Nuclear Information System (INIS)

Meot-Reymond, S.

1996-01-01

Physical properties of actinide metals are essentially ruled by the 5f electrons localization. From a theoretically point of view, this localization is more important in the δ-phase than in the α-one. To compare their magnetic behaviour, low temperature magnetic susceptibility measurements have been performed and previous-resistivity data have been analysed. Experimental results and theoretical data can be conciliate by the existence of a Kondo effect in the δ-Pu phase. (author)

Enhancing community detection by using local structural information

International Nuclear Information System (INIS)

Xiang, Ju; Bao, Mei-Hua; Tang, Liang; Li, Jian-Ming; Hu, Ke; Chen, Benyan; Hu, Jing-Bo; Zhang, Yan; Tang, Yan-Ni; Gao, Yuan-Yuan

2016-01-01

Many real-world networks, such as gene networks, protein–protein interaction networks and metabolic networks, exhibit community structures, meaning the existence of groups of densely connected vertices in the networks. Many local similarity measures in the networks are closely related to the concept of the community structures, and may have a positive effect on community detection in the networks. Here, various local similarity measures are used to extract local structural information, which is then applied to community detection in the networks by using the edge-reweighting strategy. The effect of the local similarity measures on community detection is carefully investigated and compared in various networks. The experimental results show that the local similarity measures are crucial for the improvement of community detection methods, while the positive effect of the local similarity measures is closely related to the networks under study and applied community detection methods. (paper: interdisciplinary statistical mechanics)

Survey of horizontal stresses in coal mines from available measurements and mapping.

CSIR Research Space (South Africa)

Frith, R

2002-09-01

Full Text Available of work for the project was outlined in the proposal submitted to SIMRAC in mid-2000 and is summarised as follows: (i) to undertake a peer review of available in-situ stress measurements relating to the Witbank and Highveld coalfields in South Africa... OF HORIZONTAL STRESS IN THE WITBANK AND HIGHVELD COALFIELDS 21 4.1 Is Horizontal Stress at Work in Roadway Roof Behaviour? 21 4.2 Summary of Measured Horizontal Stresses 24 4.3 Proposed Model for the Origin of Horizontal Stress Within the Coalfields 27 4...

The potential of continuous, local atomic clock measurements for earthquake prediction and volcanology

Directory of Open Access Journals (Sweden)

Bondarescu Mihai

2015-01-01

Full Text Available Modern optical atomic clocks along with the optical fiber technology currently being developed can measure the geoid, which is the equipotential surface that extends the mean sea level on continents, to a precision that competes with existing technology. In this proceeding, we point out that atomic clocks have the potential to not only map the sea level surface on continents, but also look at variations of the geoid as a function of time with unprecedented timing resolution. The local time series of the geoid has a plethora of applications. These include potential improvement in the predictions of earthquakes and volcanoes, and closer monitoring of ground uplift in areas where hydraulic fracturing is performed.

Measurement of the performance characteristics of diagnostic X-ray systems used in medicine

International Nuclear Information System (INIS)

1981-01-01

A booklet has been produced by the Diagnostic Radiology Topic Group of the Hospital Physicists' Association, providing the basis for exhaustive performance tests on X-ray image intensifier television systems. After a general introduction to the equipment, the parameters which may need to be assessed are outlined in section 1. The measurement techniques and equipment necessary to undertake the measurements are presented in section 2. Specimen data sheets are also presented which the user may find useful to record the data acquired in the field. (U.K.)

Opto-acoustic measurement of the local light absorption coefficient in turbid media: 2. On the possibility of light absorption coefficient measurement in a turbid medium from the amplitude of the opto-acoustic signal

International Nuclear Information System (INIS)

Pelivanov, Ivan M; Barskaya, M I; Podymova, N B; Khokhlova, Tanya D; Karabutov, Aleksander A

2009-01-01

The second part of this work describes the experimental technique of measuring the local light absorption in turbid media. The technique is based on the measurement of the amplitude of an opto-acoustic (OA) signal excited in a turbid medium under the condition of one-sided access to the object under study. An OA transducer is developed to perform the proposed measurement procedure. Experiments are conducted for the turbid media with different optical properties (light absorption and reduced scattering coefficients) and for different diameters of the incident laser beam. It is found that the laser beam diameter can be chosen so that the dependences of the measured OA signal amplitude on the light absorption coefficient coincide upon varying the reduced scattering coefficient by more than twice. The obtained numerical and experimental results demonstrate that the OA method is applicable for measuring the local light absorption coefficient in turbid media, for example, in biological tissues. (measurement of parametrs of laser radiation)

Influence of Time-Series Normalization, Number of Nodes, Connectivity and Graph Measure Selection on Seizure-Onset Zone Localization from Intracranial EEG.

Science.gov (United States)

van Mierlo, Pieter; Lie, Octavian; Staljanssens, Willeke; Coito, Ana; Vulliémoz, Serge

2018-04-26

We investigated the influence of processing steps in the estimation of multivariate directed functional connectivity during seizures recorded with intracranial EEG (iEEG) on seizure-onset zone (SOZ) localization. We studied the effect of (i) the number of nodes, (ii) time-series normalization, (iii) the choice of multivariate time-varying connectivity measure: Adaptive Directed Transfer Function (ADTF) or Adaptive Partial Directed Coherence (APDC) and (iv) graph theory measure: outdegree or shortest path length. First, simulations were performed to quantify the influence of the various processing steps on the accuracy to localize the SOZ. Afterwards, the SOZ was estimated from a 113-electrodes iEEG seizure recording and compared with the resection that rendered the patient seizure-free. The simulations revealed that ADTF is preferred over APDC to localize the SOZ from ictal iEEG recordings. Normalizing the time series before analysis resulted in an increase of 25-35% of correctly localized SOZ, while adding more nodes to the connectivity analysis led to a moderate decrease of 10%, when comparing 128 with 32 input nodes. The real-seizure connectivity estimates localized the SOZ inside the resection area using the ADTF coupled to outdegree or shortest path length. Our study showed that normalizing the time-series is an important pre-processing step, while adding nodes to the analysis did only marginally affect the SOZ localization. The study shows that directed multivariate Granger-based connectivity analysis is feasible with many input nodes (> 100) and that normalization of the time-series before connectivity analysis is preferred.

The process of undertaking a quantitative dissertation for a taught M.Sc: Personal insights gained from supporting and examining students in the UK and Ireland

International Nuclear Information System (INIS)

Marshall, Gill; Brennan, Patrick

2008-01-01

Purpose: This article discusses the roles of the student and the supervisor in the process of undertaking and writing a dissertation, a potentially daunting process. Results: The authors have supervised and examined students within 20 institutions and the personal insights gained result in the guidance provided within this article. Conclusion: The authors conclude that much can be done by students working with their supervisors, to improve progress in both performing and writing up the dissertation. Taking account of these factors will ease the dissertation process and move students progressively towards the production of a well-written dissertation

Measuring Extinction in Local Group Galaxies Using Background Galaxies

Science.gov (United States)

Wyder, T. K.; Hodge, P. W.

1999-05-01

Knowledge of the distribution and quantity of dust in galaxies is important for understanding their structure and evolution. The goal of our research is to measure the total extinction through Local Group galaxies using measured properties of background galaxies. Our method relies on the SExtractor software as an objective and automated method of detecting background galaxies. In an initial test, we have explored two WFPC2 fields in the SMC and two in M31 obtained from the HST archives. The two pointings in the SMC are fields around the open clusters L31 and B83 while the two M31 fields target the globular clusters G1 and G170. Except for the G1 observations of M31, the fields chosen are very crowded (even when observed with HST) and we chose them as a particularly stringent test of the method. We performed several experiments using a series of completeness tests that involved superimposing comparison fields, adjusted to the equivalent exposure time, from the HST Medium-Deep and Groth-Westphal surveys. These tests showed that for crowded fields, such as the two in the core of the SMC and the one in the bulge of M31, this automated method of detecting galaxies can be completely dominated by the effects of crowding. For these fields, only a small fraction of the added galaxies was recovered. However, in the outlying G1 field in M31, almost all of the added galaxies were recovered. The numbers of actual background galaxies in this field are consistent with zero extinction. As a follow-up experiment, we used image processing techniques to suppress stellar objects while enhancing objects with non-stellar, more gradual luminosity profiles. This method yielded significant numbers of background galaxies in even the most crowded fields, which we are now analyzing to determine the total extinction and reddening caused by the foreground galaxy.

A Locally Nonlinear Interpretation of PUV Measurements

Science.gov (United States)

1998-10-01

k ,h s vyk U ygk tanh khs0Ž . Ž .1 a a a cosh k hqzŽ .P obsf v ,k ,h sr g hyp s0Ž .2 a dcosh kh 14Ž .k cosh k hqzŽ .1 UV obsf v ,k ,h sU q vyk U hyu ...s0Ž . Ž .3 a 1 a a 1k sinh kh k cosh k hqzŽ .2 UV obsf v ,k ,h sU q vyk U hyu s0,Ž . Ž .4 a 2 a a 2k sinh kh In principle, a unique local solution at

Scanning laser ophthalmoscope measurement of local fundus reflectance and autofluorescence changes arising from rhodopsin bleaching and regeneration.

Science.gov (United States)

Morgan, Jessica I W; Pugh, Edward N

2013-03-01

We measured the bleaching and regeneration kinetics of rhodopsin in the living human eye with two-wavelength, wide-field scanning laser ophthalmoscopy (SLO), and investigated the effect of rhodopsin bleaching on autofluorescence intensity. The retina was imaged with an Optos P200C SLO by its reflectance of 532 and 633 nm light, and its autofluorescence excited by 532 nm light, before and after exposure to lights calibrated to bleach rhodopsin substantially. Bleaching was confined to circular retinal regions of 4.8° visual angle located approximately 16° superotemporal and superonasal to fixation. Images were captured as 12-bit tiff files and postprocessed to extract changes in reflectance and autofluorescence. At the locus of bleaching transient increases in reflectance of the 532 nm, but not the 633 nm beam were observed readily and quantified. A transient increase in autofluorescence also occurred. The action spectrum, absolute sensitivity, and recovery of the 532 nm reflectance increase were consistent with previous measurements of human rhodopsin's spectral sensitivity, photosensitivity, and regeneration kinetics. The autofluorescence changes closely tracked the changes in rhodopsin density. The bleaching and regeneration kinetics of rhodopsin can be measured locally in the human retina with a widely available SLO. The increased autofluorescence excited by 532 nm light upon bleaching appears primarily due to transient elimination of rhodopsin's screening of autofluorescent fluorochromes in the RPE. The spatially localized measurement with a widely available SLO of rhodopsin, the most abundant protein in the retina, could be a valuable adjunct to retinal health assessment.

Measuring transferring similarity via local information

Science.gov (United States)

Yin, Likang; Deng, Yong

2018-05-01

Recommender systems have developed along with the web science, and how to measure the similarity between users is crucial for processing collaborative filtering recommendation. Many efficient models have been proposed (i.g., the Pearson coefficient) to measure the direct correlation. However, the direct correlation measures are greatly affected by the sparsity of dataset. In other words, the direct correlation measures would present an inauthentic similarity if two users have a very few commonly selected objects. Transferring similarity overcomes this drawback by considering their common neighbors (i.e., the intermediates). Yet, the transferring similarity also has its drawback since it can only provide the interval of similarity. To break the limitations, we propose the Belief Transferring Similarity (BTS) model. The contributions of BTS model are: (1) BTS model addresses the issue of the sparsity of dataset by considering the high-order similarity. (2) BTS model transforms uncertain interval to a certain state based on fuzzy systems theory. (3) BTS model is able to combine the transferring similarity of different intermediates using information fusion method. Finally, we compare BTS models with nine different link prediction methods in nine different networks, and we also illustrate the convergence property and efficiency of the BTS model.

Alternative sources of financing entrepreneurial undertakings in agriculture

Directory of Open Access Journals (Sweden)

Njegomir Vladimir

2017-01-01

Full Text Available Insufficiency of internal financial resources and limited access to external sources of capital, as one of the key problems, local agricultural producers - entrepreneurs usualy describe with high cost of capital, complicated procedures, lack of transparency in regard to the settlement of credit requests and problems with security of loans. The aim of this study is to analyze the possibilities of facilitating access to increased volume of capital for domestic entrepreneurs in agriculture by using funding sources that are applied in developed economies for financing entrepreneurs. In order to achieve the stated aim, the subject of investigation in this paper is the analysis of alternative sources of financing, which use or increased adoption in Serbia would provide greater availability of capital for agricultural producers and others across the chain of agrobusiness complex and thus the promotion of entrepreneurial activity, and consequently, greater competitiveness and greater income of domestic agricultural producers and others across the chain of agrbusiness indirectly leading to increased economic growth and improvement of the welfare.

Measures to reinforce the legal liability of the environmental interest subject —Based on the perspective of law and economics

Science.gov (United States)

Fa, L. N.

2017-11-01

Local government should be regarded as the main subject to be stipulated by environmental law, thus to avoid local government’s alignment with commercial interests. Such a shift would, furthermore, discourage collusion against environment law or speculative behaviors motivated by maximizing production at the expense of environment pollution. Moreover, whether companies make proactive decisions to prevent pollution or not depends on the severity of appropriate environment legal system’s sanctions for their action. It would encourage enterprises to undertake their own environmental responsibility if environmental law could further enhance their environmental liability. In addition, public environmental rights should be embedded into environmental law. In this way, the public may become more aware of their environmental rights as well as the positivity of total environmental interests.

A radical-local approach to bringing cultural practices into mathematics teaching in Ghanaian primary schools, exemplified in the case of measurement

DEFF Research Database (Denmark)

Davis, Ernest Kofi; Chaiklin, Seth

2015-01-01

on a study that drew on aspects of the radical-local approach to teaching and learning (Hedegaard & Chaiklin, 2005), to teach the idea of measurement to primary four school children from an average rural school in Cape Coast Metropolis of Ghana. The first four teaching sessions with a primary four class......The main aim of this article is to put forward the idea of the general value of the radical-local approach to teaching and learning for the development of mathematics teaching in Ghana, both in relation to classroom teaching and for teacher training. To illustrate this idea, this article reports...... are described. Each of the teaching sessions drew on the social and cultural practices of the children to help them form an idea of what measurement is and which physical properties could be measured from given objects. Qualitative analysis of the teaching sessions revealed that the teaching approach enabled...

LOCAL VELOCITY PROFILES MEASURED BY PIV IN AN VESSEL AGITATED BY RUSHTON TURBINE

Directory of Open Access Journals (Sweden)

Radek Šulc

2014-12-01

Full Text Available The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV. The experiments were carried out in a fully baffled cylindrical flat bottom vessel 300 mm in inner diameter. The tank was agitated by a Rushton turbine 100 mm in diameter. The velocity fields were measured for three impeller rotation speeds 300 rpm, 450 rpm and 600 rpm and the corresponding Reynolds numbers in the range 50 000 < Re < 100 000, which means that the fully-developed turbulent flow was reached. In accordance with the theory of mixing, the dimensionless mean and fluctuation velocities in the measured directions were found to be constant and independent of the impeller rotational speed. The velocity profiles were averaged, and were expressed by Chebyshev polynomials of the 1st order. Although the experimentally investigated area was relatively far from the impeller, and it was located in upward flow to the impeller, no state of local isotropy was found. The ratio of the axial rms fluctuation velocity to the radial component was found to be in the range from 0.523 to 0.768. The axial turbulence intensity was found to be in the range from 0.293 to 0.667, which corresponds to a high turbulence intensity.

DETERMINATION OF THE URGENCY OF UNDERTAKING LAND CONSOLIDATION WORKS IN THE VILLAGES OF THE SŁAWNO MUNICIPALITY

Directory of Open Access Journals (Sweden)

Przemysław Leń

2016-09-01

Full Text Available The object of the paper is to analyze the spatial structure of land and identification of the needs of consolidation works and exchange of land in the villages of the Sławno municipality, lying in the district of Opoczno, in the Łódzkie Voivodship. The authors use the method of zero unitarisation for the purposes of determining the order of undertaking consolidation works and exchange of land in the area of research. The basis for calculation is the database of 19 factors (x1–x19 characteristic for the listed five groups of issues, describing each of the following villages. The obtained results, in a form of synthetic meter for each village, allowed creating the hierarchy of the urgency of carrying out consolidation works. The problem of excessive fragmentation of farms, constituting the collections of a certain number of parcels, in a broader sense, is one of the elements that prevent the acceleration of reforms by conversion of the Land and Buildings Register (EGiB in a full valuable real estate cadastre in Poland. The importance of the problem is highlighted by the fact that there are ecological grounds in the study area, significant from the point of view of environmental protection.

Local Observed-Score Kernel Equating

Science.gov (United States)

Wiberg, Marie; van der Linden, Wim J.; von Davier, Alina A.

2014-01-01

Three local observed-score kernel equating methods that integrate methods from the local equating and kernel equating frameworks are proposed. The new methods were compared with their earlier counterparts with respect to such measures as bias--as defined by Lord's criterion of equity--and percent relative error. The local kernel item response…

Measurements of temperature dependence of 'localized susceptibility'

CERN Document Server

Shiozawa, H; Ishii, H; Takayama, Y; Obu, K; Muro, T; Saitoh, Y; Matsuda, T D; Sugawara, H; Sato, H

2003-01-01

The magnetic susceptibility of some rare-earth compounds is estimated by measuring magnetic circular dichroism (MCD) of rare-earth 3d-4f absorption spectra. The temperature dependence of the magnetic susceptibility obtained by the MCD measurement is remarkably different from the bulk susceptibility in most samples, which is attributed to the strong site selectivity of the core MCD measurement.

Assessing local outcomes in heterogeneous gliomas

International Nuclear Information System (INIS)

Dowson, Nicholas; Bourgeat, Pierrick; Salvado, Olivier; Rose, Stephen; Thomas, Paul; Fay, Michael; Jeffree, Rosalind L; Winter, Craig; Coulthard, Alan; Smith, Jye; Gal, Yaniv; Crozier, Stuart

2014-01-01

Tumours are known to be heterogeneous, yet typical treatment plans consider them as a single unit. This may influence treatment outcomes. However, treatment cannot be customised to intra-tumour variation without a method to establish outcomes at an intra-tumour scale. This work proposes a method to both assess and measure outcomes locally within tumours. Methods: Four patients were scanned at two post-surgery time points using contrast enhanced MRI and 3,4-dihydroxy-6-[18F]-fluoro-L-phenylalanine (18F-DOPA) PET. The shell of active tumour tissue is divided into a set of small subregions at both time points. Local outcome is measured from changes in subregion volume over time. The utility of the proposed approach is evaluated by measuring the correlation between PET uptake and documented growth. Correlation with overall survival time was also examined. Results: Local outcomes were heterogeneous and evidence of a positive correlation between local 18F-DOPA uptake and local progression was observed. Conclusions: Given that intra-tumour outcomes are heterogeneous the consistently positive correlation between FDOPA uptake and progression, local analysis of tumours could prove useful for treatment planning.

Local hysteresis loops measurements on irradiated FeSiB patterned dots by magnetic force microscopy

Energy Technology Data Exchange (ETDEWEB)

Coïsson, M., E-mail: m.coisson@inrim.it [INRIM, Electromagnetism Division, strada delle Cacce 91, 10135 Torino (Italy); Barrera, G. [INRIM, Electromagnetism Division, strada delle Cacce 91, 10135 Torino (Italy); Università di Torino, Dipartimento di Chimica, via P. Giuria 9, 10125 Torino (Italy); Celegato, F.; Enrico, E.; Olivetti, E.S.; Tiberto, P.; Vinai, F. [INRIM, Electromagnetism Division, strada delle Cacce 91, 10135 Torino (Italy)

2015-01-01

Magnetic Force Microscopy (MFM) has been exploited to develop a technique capable of investigating the field-dependent magnetisation reversal processes in patterned systems, allowing the full reconstruction of a local hysteresis loop. Fe–Si–B dots with a lateral size of 6μm and a thickness of 250 nm have been prepared by sputtering and optical lithography. In the as-prepared state, the dots are characterised by a dense stripe domain configuration, clearly visible at the MFM. Subsequently, the dots have been thinned by means of exposition to a focussed ion beam, consisting of Ga{sup +} ions having an energy of 30 keV. The local hysteresis loops have been measured by means of the MFM-derived technique. The progressive thinning of the dots results in the disappearance of the perpendicular anisotropy responsible for the dense stripe domain configuration, with the dominance of the shape anisotropy for thickness values below ≈70nm. The results are consistent with the spin reorientation transition effect studied on similar systems in the form of continuous thin films.

Local hysteresis loops measurements on irradiated FeSiB patterned dots by magnetic force microscopy

International Nuclear Information System (INIS)

Coïsson, M.; Barrera, G.; Celegato, F.; Enrico, E.; Olivetti, E.S.; Tiberto, P.; Vinai, F.

2015-01-01

Magnetic Force Microscopy (MFM) has been exploited to develop a technique capable of investigating the field-dependent magnetisation reversal processes in patterned systems, allowing the full reconstruction of a local hysteresis loop. Fe–Si–B dots with a lateral size of 6μm and a thickness of 250 nm have been prepared by sputtering and optical lithography. In the as-prepared state, the dots are characterised by a dense stripe domain configuration, clearly visible at the MFM. Subsequently, the dots have been thinned by means of exposition to a focussed ion beam, consisting of Ga + ions having an energy of 30 keV. The local hysteresis loops have been measured by means of the MFM-derived technique. The progressive thinning of the dots results in the disappearance of the perpendicular anisotropy responsible for the dense stripe domain configuration, with the dominance of the shape anisotropy for thickness values below ≈70nm. The results are consistent with the spin reorientation transition effect studied on similar systems in the form of continuous thin films

Praxis in Local Legislative Governance: Measure of Organizational Effectiveness of the Component Cities in Nueva Ecija, Philippines

Directory of Open Access Journals (Sweden)

Arneil G. Gabriel

2017-05-01

Full Text Available The article discovers the congruence of governance principles and actual administrative practices in local legislative chamber in Nueva Ecija, Philippines. By using case study, it measured the influence of governance principles to legislative performance and organizational effectiveness. The good governance principles of citizens’ participation, accountability and transparency are correlated to legislative performance. Inspired by the organization theory of systems model, the result showed that there is a link between organizational effectiveness, legislative performance and observance of good governance principles. The study recommends that scientific inquiry be done to measure degree of convergence and divergence of theory and practice in Philippine administrative system.

Think globally, act locally? Local climate change and energy policies in Sweden and the UK

International Nuclear Information System (INIS)

Collier, U.; Loefstedt, R.E.

1997-01-01

While climate change is obviously a global environmental problem, there is nevertheless potential for policy initiatives at the local level. Although the competences of local authorities vary between countries, they all have some responsibilities in the crucial areas of energy and transport policy. This paper examines local competences in Sweden and the UK and looks at the responses to the climate change issue by six local authorities, focussing on energy related developments. The points of departure are very different in the two countries. Swedish local authorities are much more independent than UK ones, especially through the ownership of local energy companies. Yet, UK local authorities are relatively active in the climate change domain, at least in terms of drawing up response strategies, which they see as an opportunity for reasserting their role, after a long period of erosion of their powers. Furthermore, there is more scope for action in the UK, as in Sweden many potential measures, especially in the energy efficiency field, have already been taken. However, in both countries climate change is only a relatively marginal area of local environmental policy making and the political will, as well as the financial resources, for more radical measures are often absent. (Author)

Interfacial area measurement in two-phase bubbly flows - 3. Part - comparison between the light attenuation technique and a local method

International Nuclear Information System (INIS)

Veteau, Jean-Michel; Charlot, Roland.

1981-09-01

Initially designed for rectangular test sections the light attenuation technique is reconsidered for an application in circular tubes. Principles of a two-head local probe method are discussed, including the problems related to the measurement of interface velocities. The two techniques are compared experimentally and results lead to the conclusion that, in view of its global nature, the light attenuation method is more suitable for homogeneous two-phase flows. A new experimental set up is proposed to overcome this limitation in order to obtain local values as in the probe technique [fr

The right place. Solid waste management in the Republic of Maldives: between infrastructural measures and local practices

Directory of Open Access Journals (Sweden)

Malatesta Stefano

2015-06-01

Full Text Available The 2010 UNPD’s Assessment of Development Results defined the Maldives “a vulnerable Small Island Developing State” by pointing out the influence of both external and local human factors on their fragile ecosystems. This impact is deeply related to a main geographical feature: the high dispersion of land mass and population, both of them spread over a distance of 860 km. Above all, this dispersion has an effect on two environmental issues: energy distribution and solid waste management. The latter is particularly interesting for the geographical analysis of Small Island Countries. Due to centre-periphery distance and cost benefits analysis, in the Maldives public and private actors have developed different solid waste management models: central and regional waste management dumpsites, hybrid systems implemented by resorts and “informal” practices still followed by local communities. In this paper, we discuss these systems stressing on the relevance of combining infrastructural measures with “informal” practices at local level. Furthermore, we report the outcomes of The Right Place, a participatory waste management action carried out by MaRHE Center (a Milano- Bicocca Research Center in Faafu Magoodhoo Island.

Non-locality of non-Abelian anyons

International Nuclear Information System (INIS)

Brennen, G K; Iblisdir, S; Pachos, J K; Slingerland, J K

2009-01-01

Entangled states of quantum systems can give rise to measurement correlations of separated observers that cannot be described by local hidden variable theories. Usually, it is assumed that entanglement between particles is generated due to some distance-dependent interaction. Yet anyonic particles in two dimensions have a nontrivial interaction that is purely topological in nature. In other words, it does not depend on the distance between two particles, but rather on their exchange history. The information encoded in anyons is inherently non-local even in the single subsystem level making the treatment of anyons non-conventional. We describe a protocol to reveal the non-locality of anyons in terms of correlations in the outcomes of measurements in two separated regions. This gives a clear operational measure of non-locality for anyonic states and it opens up the possibility to test Bell inequalities in quantum Hall liquids or spin lattices.

Non-locality of non-Abelian anyons

Science.gov (United States)

Brennen, G. K.; Iblisdir, S.; Pachos, J. K.; Slingerland, J. K.

2009-10-01

Entangled states of quantum systems can give rise to measurement correlations of separated observers that cannot be described by local hidden variable theories. Usually, it is assumed that entanglement between particles is generated due to some distance-dependent interaction. Yet anyonic particles in two dimensions have a nontrivial interaction that is purely topological in nature. In other words, it does not depend on the distance between two particles, but rather on their exchange history. The information encoded in anyons is inherently non-local even in the single subsystem level making the treatment of anyons non-conventional. We describe a protocol to reveal the non-locality of anyons in terms of correlations in the outcomes of measurements in two separated regions. This gives a clear operational measure of non-locality for anyonic states and it opens up the possibility to test Bell inequalities in quantum Hall liquids or spin lattices.

Measurement-based local quantum filters and their ability to ...

Indian Academy of Sciences (India)

Debmalya Das

Berhampur (Transit Campus), National Highway 59, Berhampur 760 010, India. ∗. Corresponding author. E-mail: arvind@iisermohali.ac.in. MS received 29 July 2016; revised 21 October 2016; accepted 16 December 2016; published online 30 May 2017. Abstract. We introduce local filters as a means to detect the ...

Undertaking high impact strategies: The role of national efficiency measures in long-term energy and emission reduction in steel making

International Nuclear Information System (INIS)

Xu, Tengfang; Karali, Nihan; Sathaye, Jayant

2014-01-01

Highlights: • Evaluate long-term effects of national energy efficiency in steel making. • Use bottom-up optimization for projection in China, India and the U.S. • The effects include changes in steel production, energy use, emissions, and costs. • Three emission targets induce different structural changes and investments. • Projected energy and CO 2 intensity declines in each country from 2010 to 2050. - Abstract: In this paper, we applied bottom-up linear optimization modeling to analyze long-term national impacts of implementing energy efficiency measures on energy savings, CO 2 -emission reduction, production, and costs of steel making in China, India, and the U.S. We first established two base scenarios representing business-as-usual steel production for each country from 2010 to 2050; Base scenario (in which no efficiency measure is available) and Base-E scenario (in which efficiency measures are available), and model scenarios representing various emission-reduction targets that affects production, annual energy use and costs with the goal of cost minimization. A higher emission-reduction target generally induces larger structural changes and increased investments in nation-wide efficiency measures, in addition to autonomous improvement expected in the Base scenario. Given the same emission-reduction target compared to the base scenario, intensity of annual energy use and emissions exhibits declining trends in each country from year 2010 to 2050. While a higher emission-reduction target result in more energy reduction from the base scenario, such reduction can become more expensive to achieve. The results advance our understanding of long-term effects of national energy efficiency applications under different sets of emission-reduction targets for steel sectors in the three major economies, and provide useful implications for high impact strategies to manage production structures, production costs, energy use, and emission reduction in steel making

Local time dependence of the thermal structure in the Venusian equatorial region revealed by Akatsuki radio occultation measurements

Science.gov (United States)

Ando, H.; Fukuhara, T.; Takagi, M.; Imamura, T.; Sugimoto, N.; Sagawa, H.

2017-12-01

The radio occultation technique is one of the most useful methods to retrieve vertical temperature profiles in planetary atmospheres. Ultra-Stable Oscillator (USO) onboard Venus Climate Orbiter, Akatsuki, enables us to investigate the thermal structure of the Venus atmosphere between about 40-90 km levels. It is expected that 35 temperature profiles will be obtained by the radio occultation measurements of Akatsuki until August 2017. Static stability derived from the temperature profiles shows its local time dependence above the cloud top level at low-latitudes equatorward of 25˚. The vertical profiles of the static stability in the dawn and dusk regions have maxima at 77 km and 82 km levels, respectively. A general circulation model (GCM) for the Venus atmosphere (AFES-Venus) reproduced the thermal structures above the cloud top qualitatively consistent with the radio occultation measurements; the maxima of the static stability are seen both in the dawn and dusk regions, and the local maximum of the static stability in the dusk region is located at a highler level than in the dawn region. Comparing the thermal structures between the radio occultation measurements and the GCM results, it is suggested that the distribution of the static stability above the cloud top could be strongly affected by the diurnal tide. The thermal tide influences on the thermal structure as well as atmospheric motions above the cloud level. In addition, it is shown that zonally averaged zonal wind at about 80 km altitude could be roughly estimated from the radio occultation measurements using the dispersion relation of the internal gravity wave.

Locally measuring the adhesion of InP directly bonded on sub-100 nm patterned Si

International Nuclear Information System (INIS)

Pantzas, K; Patriarche, G; Beaudoin, G; Itawi, A; Sagnes, I; Talneau, A; Bourhis, E Le; Troadec, D

2016-01-01

A nano-scale analogue to the double cantilever experiment that combines instrumented nano-indentation and atomic force microscopy is used to precisely and locally measure the adhesion of InP bonded on sub-100 nm patterned Si using oxide-free or oxide-mediated bonding. Surface-bonding energies of 0.548 and 0.628 J m"−"2, respectively, are reported. These energies correspond in turn to 51% and 57% of the surface bonding energy measured in unpatterned regions on the same samples, i.e. the proportion of unetched Si surface in the patterned areas. The results show that bonding on patterned surfaces can be as robust as on unpatterned surfaces, provided care is taken with the post-patterning surface preparation process and, therefore, open the path towards innovative designs that include patterns embedded in the Si guiding layer of hybrid III-V/Si photonic integrated circuits. (paper)

Opening the Black Box: Exploring the Effect of Transformation on Online Service Delivery in Local Governments

Science.gov (United States)

van Veenstra, Anne Fleur; Zuurmond, Arre

To enhance the quality of their online service delivery, many government organizations seek to transform their organization beyond merely setting up a front office. This transformation includes elements such as the formation of service delivery chains, the adoption of a management strategy supporting process orientation and the implementation of enterprise architecture. This paper explores whether undertaking this transformation has a positive effect on the quality of online service delivery, using data gathered from seventy local governments. We found that having an externally oriented management strategy in place, adopting enterprise architecture, aligning information systems to business and sharing activities between processes and departments are positively related to the quality of online service delivery. We recommend that further research should be carried out to find out whether dimensions of organizational development too have an effect on online service delivery in the long term.

Direct localization of poles of a meromorphic function from measurements on an incomplete boundary

Science.gov (United States)

Nara, Takaaki; Ando, Shigeru

2010-01-01

This paper proposes an algebraic method to reconstruct the positions of multiple poles in a meromorphic function field from measurements on an arbitrary simple arc in it. A novel issue is the exactness of the algorithm depending on whether the arc is open or closed, and whether it encloses or does not enclose the poles. We first obtain a differential equation that can equivalently determine the meromorphic function field. From it, we derive linear equations that relate the elementary symmetric polynomials of the pole positions to weighted integrals of the field along the simple arc and end-point terms of the arc when it is an open one. Eliminating the end-point terms based on an appropriate choice of weighting functions and a combination of the linear equations, we obtain a simple system of linear equations for solving the elementary symmetric polynomials. We also show that our algorithm can be applied to a 2D electric impedance tomography problem. The effects of the proximity of the poles, the number of measurements and noise on the localization accuracy are numerically examined.

Time dependency of local cerebral blood flow measurements caused by regional variations in tissue transit time

International Nuclear Information System (INIS)

Lear, J.L.; Kasliwal, R.; Feyerabend, A.

1990-01-01

Calculated values of local cerebral blood flow (LCBF) using the diffusible tracer model are assumed to be independent of time as long as experiments are brief enough to prevent tissue saturation. This paper investigates the effects of CTT variation on LCBF measurements. Using double-label quantitative digital autoradiography, we compared iodoantipyrine (IAP)-based LCBF measurements obtained with tracer infusions of different lengths of time. Lightly anesthetized rats were given simultaneous ramp infusions of C-14 IAP (45 seconds) and I-123 IAP (15 seconds) and immediately sacrificed. Two autoradiograms of each brain section, one representing I-123 and the other representing C-14, were produced, digitized, and converted into images of LCBF based on the 15- and 45-second infusion periods. The LCBF image pairs were compared on a pixel-by-pixel basis

Lessons learned from measuring safety culture: an Australian case study.

Science.gov (United States)

Allen, Suellen; Chiarella, Mary; Homer, Caroline S E

2010-10-01

adverse events in maternity care are relatively common but often avoidable. International patient safety strategies advocate measuring safety culture as a strategy to improve patient safety. Evidence suggests it is necessary to fully understand the safety culture of an organisation to make improvements to patient safety. this paper reports a case study examining the safety culture in one maternity service in Australia and considers the benefits of using surveys and interviews to understand safety culture as an approach to identify possible strategies to improve patient safety in this setting. the study took place in one maternity service in two public hospitals in NSW, Australia. Concurrently, both hospitals were undergoing an organisational restructure which was part of a major health reform agenda. The priorities of the reform included improving the quality of care and patient safety; and, creating a more efficient health system by reducing administration inefficiencies and duplication. a descriptive case study using three approaches: the safety culture was identified to warrant improvement across all six safety culture domains. There was reduced infrastructure and capacity to support incident management activities required to improve safety, which was influenced by instability from the organisational restructure. There was a perceived lack of leadership at all levels to drive safety and quality and improving the safety culture was neither a key priority nor was it valued by the organisation. the safety culture was complex as was undertaking this study. We were unable to achieve a desired 60% response rate highlighting the limitations of using safety culture surveys in isolation as a strategy to improve safety culture. Qualitative interviews provided greater insight into the factors influencing the safety culture. The findings of this study provide evidence of the benefits of including qualitative methods with quantitative surveys when examining safety culture

Creatine kinase rate constant in the human heart measured with 3D‐localization at 7 tesla

Science.gov (United States)

Robson, Matthew D.; Neubauer, Stefan; Rodgers, Christopher T.

2016-01-01

Purpose We present a new Bloch‐Siegert four Angle Saturation Transfer (BOAST) method for measuring the creatine kinase (CK) first‐order effective rate constant kf in human myocardium at 7 tesla (T). BOAST combines a variant of the four‐angle saturation transfer (FAST) method using amplitude‐modulated radiofrequency pulses, phosphorus Bloch‐Siegert B1+‐mapping to determine the per‐voxel flip angles, and nonlinear fitting to Bloch simulations for postprocessing. Methods Optimal flip angles and repetition time parameters were determined from Monte Carlo simulations. BOAST was validated in the calf muscle of two volunteers at 3T and 7T. The myocardial CK forward rate constant was then measured in 10 volunteers at 7T in 82 min (after 1H localization). Results BOAST kfCK values were 0.281 ± 0.002 s−1 in the calf and 0.35 ± 0.05 s−1 in myocardium. These are consistent with literature values from lower fields. Using a literature values for adenosine triphosphate concentration, we computed CK flux values of 4.55 ± 1.52 mmol kg−1 s−1. The sensitive volume for BOAST depends on the B1 inhomogeneity of the transmit coil. Conclusion BOAST enables measurement of the CK rate constant in the human heart at 7T, with spatial localization in three dimensions to 5.6 mL voxels, using a 10‐cm loop coil. Magn Reson Med 78:20–32, 2017. © 2016 The Authors Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited. PMID:27579566

Net charge fluctuations and local charge compensation

International Nuclear Information System (INIS)

Fu Jinghua

2006-01-01

We propose net charge fluctuation as a measure of local charge correlation length. It is demonstrated that, in terms of a schematic multiperipheral model, net charge fluctuation satisfies the same Quigg-Thomas relation as satisfied by charge transfer fluctuation. Net charge fluctuations measured in finite rapidity windows depend on both the local charge correlation length and the size of the observation window. When the observation window is larger than the local charge correlation length, the net charge fluctuation only depends on the local charge correlation length, while forward-backward charge fluctuations always have strong dependence on the observation window size. Net charge fluctuations and forward-backward charge fluctuations measured in the present heavy ion experiments show characteristic features similar to those from multiperipheral models. But the data cannot all be understood within this simple model

Weak localization in few-layer black phosphorus

International Nuclear Information System (INIS)

Du, Yuchen; Neal, Adam T; Zhou, Hong; Ye, Peide D

2016-01-01

We have conducted a comprehensive investigation into the magneto-transport properties of few-layer black phosphorus in terms of phase coherence length, phase coherence time, and mobility via weak localization measurement and Hall-effect measurement. We present magnetoresistance data showing the weak localization effect in bare p-type few-layer black phosphorus and reveal its strong dependence on temperature and carrier concentration. The measured weak localization agrees well with the Hikami–Larkin–Nagaoka model and the extracted phase coherence length of 104 nm at 350 mK, decreasing as ∼T −0.513+−0.053 with increased temperature. Weak localization measurement allows us to qualitatively probe the temperature-dependent phase coherence time τ ϕ , which is in agreement with the theory of carrier interaction in the diffusive regime. We also observe the universal conductance fluctuation phenomenon in few-layer black phosphorus within moderate magnetic field and low temperature regime. (paper)

Location of power stations and measures for local people model analysis concerning location negotiation with local fishery association

International Nuclear Information System (INIS)

Wakatani, Yoshifumi; Yamanaka, Yoshiro

1982-01-01

The recent negotiation of enterprisers and local people concerning the location of power stations tends to extend for long period because of diversified arguing points and the information exchange of high density, and also to be complicated by the interrelation with other points. It is a large problem to seek the policy of such negotiation for enterprisers to respond to local people. In this study, as the first step, the policy and action appeared in location negotiations and the development of the negotiations were analyzed on the cases of location, and two kinds of the model analysis were carried out, taking fishery compensation negotiation as the object among them. The knowledge was obtained about what response to local fishery associations is effective to promote the location. The classification of location negotiation and the factors affecting the development of negotiation were investigated. It was shown to be effective to divide the process of location negotiation into five stages of advancement. The model analysis was carried out according to game theory and by gaming simulation method. The results are reported. (Kako, I.)

Location of power stations and measures for local people model analysis concerning location negotiation with local fishery association

Energy Technology Data Exchange (ETDEWEB)

Wakatani, Yoshifumi; Yamanaka, Yoshiro (Central Research Inst. of electric Power Industry, Tokyo (Japan))

1982-05-01

The recent negotiation of enterprisers and local people concerning the location of power stations tends to extend for long periods because of diversified arguing points and the information exchange of high density, and also to be complicated by the interrelation with other points. It is a large problem to seek the policy of such negotiation for enterprisers to respond to local people. In this study, as the first step, the policy and action appeared in location negotiations and the development of the negotiations were analyzed on the cases of location, and two kinds of the model analysis were carried out, taking fishery compensation negotiation as the object among them. The knowledge was obtained about what response to local fishery associations is effective to promote the location. The classification of location negotiation and the factors affecting the development of negotiation were investigated. It was shown to be effective to divide the process of location negotiation into five stages of advancement. The model analysis was carried out according to game theory and by gaming simulation method. The results are reported.

First Absolutely Calibrated Localized Measurements of Ion Velocity in the MST in Locked and Rotating Plasmas

Science.gov (United States)

Baltzer, M.; Craig, D.; den Hartog, D. J.; Nornberg, M. D.; Munaretto, S.

2015-11-01

An Ion Doppler Spectrometer (IDS) is used on MST for high time-resolution passive and active measurements of impurity ion emission. Absolutely calibrated measurements of flow are difficult because the spectrometer records data within 0.3 nm of the C+5 line of interest, and commercial calibration lamps do not produce lines in this narrow range . A novel optical system was designed to absolutely calibrate the IDS. The device uses an UV LED to produce a broad emission curve in the desired region. A Fabry-Perot etalon filters this light, cutting transmittance peaks into the pattern of the LED emission. An optical train of fused silica lenses focuses the light into the IDS with f/4. A holographic diffuser blurs the light cone to increase homogeneity. Using this light source, the absolute Doppler shift of ion emissions can be measured in MST plasmas. In combination with charge exchange recombination spectroscopy, localized ion velocities can now be measured. Previously, a time-averaged measurement along the chord bisecting the poloidal plane was used to calibrate the IDS; the quality of these central chord calibrations can be characterized with our absolute calibration. Calibration errors may also be quantified and minimized by optimizing the curve-fitting process. Preliminary measurements of toroidal velocity in locked and rotating plasmas will be shown. This work has been supported by the US DOE.

Social capital and health: measuring and understanding social capital at a local level could help to tackle health inequalities more effectively.

Science.gov (United States)

Pilkington, Paul

2002-09-01

This paper examines whether an understanding of the concept of social capital and its local measurement can help to tackle inequalities in health within and across communities. The paper concludes that the concept of social capital offers a valuable opportunity to help public health professionals understand how to approach inequalities in health with a greater awareness of the social processes affecting the health of communities. The measurement of social capital has been problematic. However, new guidance from the Health Development Agency (HDA) provides a useful tool for developing social capital research. A greater understanding of whether, and how social capital relates to health will help to improve strategies to reduce health inequalities at the community level. Public health professionals contributing to community development strategies such as Neighbourhood Renewal Projects, Community Safety Partnerships, Health Action Zones and Health Improvement Programmes (HImPs) should encourage thought to be given about the role that an understanding of social capital could play in making these strategies more effective. Using the HDA measurement tool locally could be one way of doing this.

Non proliferation regimes undertakings: Benefits and limits of synergies in verification technologies and procedures

International Nuclear Information System (INIS)

Richard, M.

2001-01-01

Full text: Thirty years ago the NPT was entering into force. Therewith, when a State became party to the NPT, it had, in accordance with article III.1 of the Treaty, an undertaking to conclude a Comprehensive Safeguards agreement with the IAEA and accept safeguards verification on source or special fissionable material in all peaceful nuclear activities within its territories in order to verify that such material is not diverted. This multilateral instrument was the foundation stone of the non-proliferation regime and marked the actual birth of internationally accepted measures to verily compliance with politically stringent agreements. Since that time several important multilateral or bilateral instruments on non-proliferation and disarmament have been negotiated and adopted to curb the development and the acquisition of Weapons of Mass Destruction (WMD) most of them since the middle of the eighties and the collapse of the Soviet Union. Amongst the multilateral instruments are the Convention on the Prohibition of Bacteriological Weapon and Toxin Weapons (1972), the Convention on the Prohibition of Chemical Weapons (1993), the Comprehensive Test Ban Treaty (1996), the Strengthening of the IAEA Safeguards and the Additional Protocol (1997), with some still in negotiation like the Protocol of the Convention on the Prohibition of Bacteriological and Toxin Weapons, and some on which negotiation is still a wish like the Fissile Material Cut-off Treaty. Bilateral disarmament agreements between the United States of America and the Russian Federation such as the INF Treaty, START I and II, the agreements on the elimination of excess defence nuclear material as well as the Trilateral Initiative with the IAEA pave the way to nuclear disarmament with the reduction of both the number of nuclear weapons arsenal and the fissile material inventories. The politically stringent undertakings of States that have become parties to those agreements would not be possible without the

Rural wood consumption patterns of local and immigrant households with differentiated access to resources in Xishuangbanna, Yunnan, China

International Nuclear Information System (INIS)

Mertens, Charlotte Filt; Bruun, Thilde Bech; Schmidt-Vogt, Dietrich; He, Jun; Neergaard, Andreas de

2015-01-01

In Xishuangbanna, China, rubber production has spread rapidly, resulting in extensive land use changes and an increasing influx of migrant workers who have come to find work on the plantations. These migrant workers have limited access to subsidies and the local collective forest due to the household registration system in China called hukou. To assess how these policy-based restrictions on access affect wood consumption and local communities, a case study was conducted in Manlin village, Xishuangbanna, undertaking a household and weight survey with local and immigrant households. The results show no significant difference in firewood consumption between the subpopulations, despite predominantly more local than immigrant households have access to subsidised alternative energy sources. On the other hand, limited access to the collective forest is found to influence the choice of housing materials and living standards in immigrant households as they cannot access timber or afford brick houses. This paper highlights rural issues connected to the hukou system and suggests that rural energy and resource policies should take the growing population of immigrant workers into consideration in future to expand the reach of the polices to the de facto and not only de jure rural population and thus optimise policy efficiency. - Highlights: • The hukou system directly affects rural wood access and consumption. • Immigrant households have little or no access to timber. • Registration status does not have a significant effect on firewood consumption. • Excluding immigrant households will limit policy outreach and efficiency

A domain decomposition approach for full-field measurements based identification of local elastic parameters

KAUST Repository

Lubineau, Gilles

2015-03-01

We propose a domain decomposition formalism specifically designed for the identification of local elastic parameters based on full-field measurements. This technique is made possible by a multi-scale implementation of the constitutive compatibility method. Contrary to classical approaches, the constitutive compatibility method resolves first some eigenmodes of the stress field over the structure rather than directly trying to recover the material properties. A two steps micro/macro reconstruction of the stress field is performed: a Dirichlet identification problem is solved first over every subdomain, the macroscopic equilibrium is then ensured between the subdomains in a second step. We apply the method to large linear elastic 2D identification problems to efficiently produce estimates of the material properties at a much lower computational cost than classical approaches.

Local quantum thermal susceptibility

Science.gov (United States)

de Pasquale, Antonella; Rossini, Davide; Fazio, Rosario; Giovannetti, Vittorio

2016-09-01

Thermodynamics relies on the possibility to describe systems composed of a large number of constituents in terms of few macroscopic variables. Its foundations are rooted into the paradigm of statistical mechanics, where thermal properties originate from averaging procedures which smoothen out local details. While undoubtedly successful, elegant and formally correct, this approach carries over an operational problem, namely determining the precision at which such variables are inferred, when technical/practical limitations restrict our capabilities to local probing. Here we introduce the local quantum thermal susceptibility, a quantifier for the best achievable accuracy for temperature estimation via local measurements. Our method relies on basic concepts of quantum estimation theory, providing an operative strategy to address the local thermal response of arbitrary quantum systems at equilibrium. At low temperatures, it highlights the local distinguishability of the ground state from the excited sub-manifolds, thus providing a method to locate quantum phase transitions.

Recent progress in methods for non-invasive measurements of local strain in practical superconducting wires and conductors using quantum beam techniques

International Nuclear Information System (INIS)

Osamura, Kozo; Machiya, Shutaro; Tsuchiya, Yoshinori; Suzuki, Hiroshi; Awaji, Satoshi; Takahashi, Kohki; Oguro, Hidetoshi; Harjo, Stefanus; Hemmi, Tsutomu; Nakamoto, Tatsushi; Sugano, Michinaka; Jin, Xinzhe; Kajiwara, Kentaro

2014-01-01

Practical superconducting wires are designed with a composite structure to meet the desired engineering characteristics by expert selection of materials and design of the architecture. In practice, the local strain exerted on the superconducting component influences the electromagnetic properties. Here, recent progress in methods used to measure the local strain in practical superconducting wires and conductors using quantum beam techniques is introduced. Recent topics on the strain dependence of critical current are reviewed for three major practical wires: ITER-Nb 3 Sn strand, DI-BSCCO wires and REBCO tapes. (author)

No-reference stereoscopic image quality measurement based on generalized local ternary patterns of binocular energy response

International Nuclear Information System (INIS)

Zhou, Wujie; Yu, Lu

2015-01-01

Perceptual no-reference (NR) quality measurement of stereoscopic images has become a challenging issue in three-dimensional (3D) imaging fields. In this article, we propose an efficient binocular quality-aware features extraction scheme, namely generalized local ternary patterns (GLTP) of binocular energy response, for general-purpose NR stereoscopic image quality measurement (SIQM). More specifically, we first construct the binocular energy response of a distorted stereoscopic image with different stimuli of amplitude and phase shifts. Then, the binocular quality-aware features are generated from the GLTP of the binocular energy response. Finally, these features are mapped to the subjective quality score of the distorted stereoscopic image by using support vector regression. Experiments on two publicly available 3D databases confirm the effectiveness of the proposed metric compared with the state-of-the-art full reference and NR metrics. (paper)

Local measurement and numerical modeling of mass/heat transfer from a turbine blade in a linear cascade with tip clearance

Science.gov (United States)

Jin, Peitong

2000-11-01

Local mass/heat transfer measurements from the turbine blade near-tip and the tip surfaces are performed using the naphthalene sublimation technique. The experiments are conducted in a linear cascade consisting of five high-pressure blades with a central test-blade configuration. The incoming flow conditions are close to those of the gas turbine engine environment (boundary layer displacement thickness is about 0.01 of chord) with an exit Reynolds number of 6.2 x 105. The effects of tip clearance level (0.86%--6.90% of chord), mainstream Reynolds number and turbulence intensity (0.2 and 12.0%) are investigated. Two methods of flow visualization---oil and lampblack, laser light sheet smoke wire---as well as static pressure measurement on the blade surface are used to study the tip leakage flow and vortex in the cascade. In addition, numerical modeling of the flow and heat transfer processes in the linear cascade with different tip clearances is conducted using commercial software incorporating advanced turbulence models. The present study confirms many important results on the tip leakage flow and vortex from the literature, contributes to the current understanding in the effects of tip leakage flow and vortex on local heat transfer from the blade near-tip and the tip surfaces, and provides detailed local and average heat/mass transfer data applicable to turbine blade tip cooling design.

Local quantum thermal susceptibility

Science.gov (United States)

De Pasquale, Antonella; Rossini, Davide; Fazio, Rosario; Giovannetti, Vittorio

2016-01-01

Thermodynamics relies on the possibility to describe systems composed of a large number of constituents in terms of few macroscopic variables. Its foundations are rooted into the paradigm of statistical mechanics, where thermal properties originate from averaging procedures which smoothen out local details. While undoubtedly successful, elegant and formally correct, this approach carries over an operational problem, namely determining the precision at which such variables are inferred, when technical/practical limitations restrict our capabilities to local probing. Here we introduce the local quantum thermal susceptibility, a quantifier for the best achievable accuracy for temperature estimation via local measurements. Our method relies on basic concepts of quantum estimation theory, providing an operative strategy to address the local thermal response of arbitrary quantum systems at equilibrium. At low temperatures, it highlights the local distinguishability of the ground state from the excited sub-manifolds, thus providing a method to locate quantum phase transitions. PMID:27681458

Mermin Non-Locality in Abstract Process Theories

Directory of Open Access Journals (Sweden)

Stefano Gogioso

2015-11-01

Full Text Available The study of non-locality is fundamental to the understanding of quantum mechanics. The past 50 years have seen a number of non-locality proofs, but its fundamental building blocks, and the exact role it plays in quantum protocols, has remained elusive. In this paper, we focus on a particular flavour of non-locality, generalising Mermin's argument on the GHZ state. Using strongly complementary observables, we provide necessary and sufficient conditions for Mermin non-locality in abstract process theories. We show that the existence of more phases than classical points (aka eigenstates is not sufficient, and that the key to Mermin non-locality lies in the presence of certain algebraically non-trivial phases. This allows us to show that fRel, a favourite toy model for categorical quantum mechanics, is Mermin local. We show Mermin non-locality to be the key resource ensuring the device-independent security of the HBB CQ (N,N family of Quantum Secret Sharing protocols. Finally, we challenge the unspoken assumption that the measurements involved in Mermin-type scenarios should be complementary (like the pair X,Y, opening the doors to a much wider class of potential experimental setups than currently employed. In short, we give conditions for Mermin non-locality tests on any number of systems, where each party has an arbitrary number of measurement choices, where each measurement has an arbitrary number of outcomes and further, that works in any abstract process theory.

Tourism Cluster Competitiveness and Sustainability: Proposal for a Systemic Model to Measure the Impact of Tourism on Local Development

Directory of Open Access Journals (Sweden)

Sieglinde Kindl da Cunha

2005-07-01

Full Text Available This article proposes a model to measure tourism cluster impact on local development with a view to assessing tourism cluster interaction, competitiveness and sustainability impacts on the economy, society and the environment. The theoretical basis for this model is founded on cluster concept and typology adapting and integrating the systemic competitiveness and sustainability concepts within economic, social, cultural, environmental and political dimensions. The proposed model shows a holistic, multidisciplinary and multi-sector view of local development brought back through a systemic approach to the concepts of competitiveness, social equity and sustainability. Its results make possible strategic guidance to agents responsible for public sector tourism policies, as well as the strategies for competitiveness, competition, cooperation and sustainability in private companies and institutions.

Excessive leakage measurement using pressure decay method in containment building local leakage rate test at nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Lee, Won Kyu; Kim, Chang Soo; Kim, Wang Bae [KHNP, Central Research Institute, Daejeon (Korea, Republic of)

2016-06-15

There are two methods for conducting the containment local leakage rate test (LLRT) in nuclear power plants: the make-up flow rate method and the pressure decay method. The make-up flow rate method is applied first in most power plants. In this method, the leakage rate is measured by checking the flow rate of the make-up flow. However, when it is difficult to maintain the test pressure because of excessive leakage, the pressure decay method can be used as a complementary method, as the leakage rates at pressures lower than normal can be measured using this method. We studied the method of measuring over leakage using the pressure decay method for conducting the LLRT for the containment building at a nuclear power plant. We performed experiments under conditions similar to those during an LLRT conducted on-site. We measured the characteristics of the leakage rate under varies pressure decay conditions, and calculated the compensation ratio based on these data.

Measuring disaster preparedness of local emergency medical services agencies

OpenAIRE

Elliott, Ross W.

2010-01-01

CHDS State/Local Approved for public release; distribution is unlimited Emergency Medical Services (EMS) plays a key role in disaster response. Yet, determining how much preparedness is enough to achieve an acceptable level of preparedness is challenging. After conducting an extensive literature review, it is evident no nationally accepted method exists to evaluate an EMS system's level of disaster preparedness systematically. Research was conducted to define the skills and equipmen...

Local perceptions as a guide for the sustainable management of natural resources: empirical evidence from a small-scale society in Bolivian Amazonia

Directory of Open Access Journals (Sweden)

Álvaro Fernández-Llamazares

2016-03-01

Full Text Available Research on natural resource management suggests that local perceptions form the basis upon which many small-scale societies monitor availability and change in the stock of common-pool natural resources. In contrast, this literature debates whether local perceptions can be effective in guiding the sustainable management of natural resources. With empirical evidence on this matter still highly limited, we explored the role of local perceptions as drivers of harvesting and management behavior in a small-scale society in Bolivian Amazonia. We conducted structured interviews to capture local perceptions of availability and change in the stock of thatch palm (Geonoma deversa among the Tsimane', an indigenous society of foragers-horticulturalists (n = 296 adults in 13 villages. We analyzed whether perceptions of availability match estimates of abundance obtained from ecological data and whether differences in perception help to explain harvesting behavior and local management of thatch palm. Perceptions of availability of G. deversa are highly contingent upon the social, economic, and cultural conditions within which the Tsimane' have experienced changes in the availability of the resource, thus giving a better reflection of the historical, rather than of the ecological, dimensions of the changes undergone. Although local perceptions might fall short in precision when scrutinized from an ecological standpoint, their importance in informing sustainable management should not be underestimated. Our findings show that most of the harvesting and management actions that the Tsimane' undertake are, at least partially, shaped by their local perceptions. This paper contributes to the broader literature on natural resource management by providing empirical evidence of the critical role of local perceptions in promoting collective responses for the sustainable management of natural resources.

Analysis of the local structure of AlN:Mn using X-ray absorption fine structure measurements

Energy Technology Data Exchange (ETDEWEB)

Miyajima, Takao [Materials Laboratories, Sony Corporation, 4-14-1 Asahi-cho, Atsugi-shi, Kanagawa 243-0014 (Japan); Kudo, Yoshihiro [Materials Analysis Lab., Sony Corporation, 4-18-1 Okada, Atsugi-shi, Kanagawa 243-0021 (Japan); Uruga, Tomoya [Japan Synchrotron Radiation Institute, 1-1-1 Kouto, Mikazuki-cho, Sayo-gun, Hyogo 679-5198 (Japan); Hara, Kazuhiko [Research Inst. of Electronics, Shizuoka Univ., 3-5-1 Johoku, Hamamatsu, Shizuoka 432-8011 (Japan)

2006-06-15

The local structure around the Mn atoms in MOCVD-grown AlN:Mn films which show Mn-related red-orange photoluminescence with a 600nm-peak at room temperature was investigated using the X-ray absorption fine structure (XAFS) measurements. We found that Mn atoms occupy Al lattice sites in the AlN film and that the Mn ions have a charge between +2 and +3. From these results, we think that the red-orange luminescence is caused by the transition of d-electrons in the Mn ions. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Local Lyapunov exponents for dissipative continuous systems

International Nuclear Information System (INIS)

Grond, Florian; Diebner, Hans H.

2005-01-01

We analyze a recently proposed algorithm for computing Lyapunov exponents focusing on its capability to calculate reliable local values for chaotic attractors. The averaging process of local contributions to the global measure becomes interpretable, i.e. they are related to the local topological structure in phase space. We compare the algorithm with the commonly used Wolf algorithm by means of analyzing correlations between coordinates of the chaotic attractor and local values of the Lyapunov exponents. The correlations for the new algorithm turn out to be significantly stronger than those for the Wolf algorithm. Since the usage of scalar measures to capture complex structures can be questioned we discuss these entities along with a more phenomenological description of scatter plots

Silent Localization of Underwater Sensors Using Magnetometers

Directory of Open Access Journals (Sweden)

Jonas Callmer

2010-01-01

Full Text Available Sensor localization is a central problem for sensor networks. If the sensor positions are uncertain, the target tracking ability of the sensor network is reduced. Sensor localization in underwater environments is traditionally addressed using acoustic range measurements involving known anchor or surface nodes. We explore the usage of triaxial magnetometers and a friendly vessel with known magnetic dipole to silently localize the sensors. The ferromagnetic field created by the dipole is measured by the magnetometers and is used to localize the sensors. The trajectory of the vessel and the sensor positions are estimated simultaneously using an Extended Kalman Filter (EKF. Simulations show that the sensors can be accurately positioned using magnetometers.

Impact of local adaptation measures and regional climate change on perceived temperature

Energy Technology Data Exchange (ETDEWEB)

Schoetter, Robert; Grawe, David; Hoffmann, Peter; Kirschner, Peter; Heinke Schluenzen, K. [Hamburg Univ. (Germany). Meteorological Inst.; Graetz, Angelika [Deutscher Wetterdienst, Freiburg (Germany). Zentrum fuer Medizin-Meteorologische Forschung

2013-04-15

The perceived temperature (PT) is a measure for the quantification of human thermal comfort developed by the German Meteorological Service (DWD). In the present article, the sensitivity of PT on air temperature, water vapour pressure, wind speed, mean radiant temperature, street canyon width, and building heights is investigated. The mesoscale atmospheric model METRAS is integrated for a domain covering the city of Hamburg at 250 m horizontal resolution to calculate the meteorological input data for PT. The sensitivities of PT are determined by automatic differentiation of the basic DWD program. The sensitivities show how local adaptation measures and regional climate change can influence PT. The sensitivities also allow to estimate how accurate different input variables need to be known in order to achieve a desired accuracy in PT. The results are discussed in detail for 10 June 2007, a cloudless day with advection of warm air masses from south-east. A comparison with results obtained for different synoptic situations during summer is made. The sensitivities of PT on air temperature, water vapour pressure and mean radiant temperature are higher during warm and humid conditions than in situations with thermal comfort. The sensitivity of PT on wind speed is highest for low wind speeds. Around noon, increasing the building heights by 5 m can reduce PT up to 2.4 K due to shading effects in street canyons with aspect ratios above 0.5. After sunset, increasing the building heights by 5 m tends to moderately increase PT due to increased longwave radiation. (orig.)

The Level of Anxiety and Depression in Dialysis Patients Undertaking Regular Physical Exercise Training--a Preliminary Study.

Science.gov (United States)

Dziubek, Wioletta; Kowalska, Joanna; Kusztal, Mariusz; Rogowski, Łukasz; Gołębiowski, Tomasz; Nikifur, Małgorzata; Szczepańska-Gieracha, Joanna; Zembroń-Łacny, Agnieszka; Klinger, Marian; Woźniewski, Marek

2016-01-01

The aim of the study was to evaluate the effects of a six-month physical training undertaken by haemodialysis (HD) patients, on the depression and anxiety. Patients with end stage renal disease (ESRD) were recruited from the dialysis station at the Department of Nephrology and Transplantation Medicine in Wroclaw. Physical training took place at the beginning of the first 4-hours of dialysis, three times a week for six months. A personal questionnaire, Beck Depression Inventory (BDI) and State-Trait Anxiety Inventory (STAI) were used in the study. A total of 28 patients completed the study: 20 were randomised to endurance training and 8 were randomised to resistance training. Statistical analysis of depression and anxiety at the initial (t1) and final examination (t2) indicated a significant reduction in depression and anxiety, particularly anxiety as a trait (X2) in the whole study group. The change in anxiety as a state correlated with the disease duration, duration of dialysis and the initial level of anxiety as a state (t1X1). The change in anxiety as a trait significantly correlated with age and the initial level of anxiety (t1X2). Undertaking physical training during dialysis by patients with ESRD is beneficial in reducing their levels of anxiety and depression. Both resistance and endurance training improves mood, but only endurance training additionally results in anxiety reduction. © 2016 S. Karger AG, Basel.

The Level of Anxiety and Depression in Dialysis Patients Undertaking Regular Physical Exercise Training - a Preliminary Study

Directory of Open Access Journals (Sweden)

Wioletta Dziubek

2016-02-01

Full Text Available Background/Aims: The aim of the study was to evaluate the effects of a six-month physical training undertaken by haemodialysis (HD patients, on the depression and anxiety. Methods: Patients with end stage renal disease (ESRD were recruited from the dialysis station at the Department of Nephrology and Transplantation Medicine in Wroclaw. Physical training took place at the beginning of the first 4-hours of dialysis, three times a week for six months. A personal questionnaire, Beck Depression Inventory (BDI and State-Trait Anxiety Inventory (STAI were used in the study. Results: A total of 28 patients completed the study: 20 were randomised to endurance training and 8 were randomised to resistance training. Statistical analysis of depression and anxiety at the initial (t1 and final examination (t2 indicated a significant reduction in depression and anxiety, particularly anxiety as a trait (X2 in the whole study group. The change in anxiety as a state correlated with the disease duration, duration of dialysis and the initial level of anxiety as a state (t1X1. The change in anxiety as a trait significantly correlated with age and the initial level of anxiety (t1X2. Conclusions: Undertaking physical training during dialysis by patients with ESRD is beneficial in reducing their levels of anxiety and depression. Both resistance and endurance training improves mood, but only endurance training additionally results in anxiety reduction.

SU-G-IeP4-14: Prostate Brachytherapy Activity Measurement and Source Localization by Using a Dual Photon Emission Computed Tomography System: A Feasibility Study

Energy Technology Data Exchange (ETDEWEB)

Lin, C; Lin, H; Chuang, K; Chiang, C [National Tsing Hua University, Hsinchu, Taiwan (China); Tsai, Y [National Taiwan University Hospital, Taipei City, Taiwan (China)

2016-06-15

Purpose: To monitor the activity distribution and needle position during and after implantation in operating rooms. Methods: Simulation studies were conducted to assess the feasibility of measurement activity distribution and seed localization using the DuPECT system. The system consists of a LaBr3-based probe and planar detection heads, a collimation system, and a coincidence circuit. The two heads can be manipulated independently. Simplified Yb-169 brachytherapy seeds were used. A water-filled cylindrical phantom with a 40-mm diameter and 40-mm length was used to model a simplified prostate of the Asian man. Two simplified seeds were placed at a radial distance of 10 mm and tangential distance of 10 mm from the center of the phantom. The probe head was arranged perpendicular to the planar head. Results of various imaging durations were analyzed and the accuracy of the seed localization was assessed by calculating the centroid of the seed. Results: The reconstructed images indicate that the DuPECT can measure the activity distribution and locate the seeds dwelt in different positions intraoperatively. The calculated centroid on average turned out to be accurate within the pixel size of 0.5 mm. The two sources were identified when the duration is longer than 15 s. The sensitivity measured in water was merely 0.07 cps/MBq. Conclusion: Preliminary results show that the measurement of the activity distribution and seed localization are feasible using the DuPECT system intraoperatively. It indicates the DuPECT system has potential to be an approach for dose-distribution-validation. The efficacy of acvtivity distribution measurement and source localization using the DuPECT system will evaluated in more realistic phantom studies (e.g., various attenuation materials and greater number of seeds) in the future investigation.

A thermal technique for local ultrasound intensity measurement: part 2. Application to exposimetry on a medical diagnostic device

International Nuclear Information System (INIS)

Wilkens, V

2010-01-01

Acoustic output measurements on medical ultrasound equipment are usually performed using radiation force balances to determine the output power and using hydrophones to determine pressure and intensity parameters. The local temporal-average ultrasound intensity can be measured alternatively by thermal sensors. The technique was described and prototype sensors were characterized in a preceding paper. Here, the application of such a thermal intensity sensor to the output beam characterization of a typical medical diagnostic device is described. Two transducers, a 7.5 MHz linear array and a 3.5 MHz convex array were investigated in different operating modes. For comparison, hydrophone measurements were also performed. If the spatial averaging effect is taken into account, good agreement is found between both measurement methods. The maximum deviations of the spatial-peak temporal-average intensities I SPTA obtained with the thermal sensor from the corresponding hydrophone-based results were below 12%. The simple thermal technique offers advantages for intensity measurements especially in the case of scanning and combined modes of the diagnostic device, where the synchronization between hydrophone measurements and the complex pulse emission pattern can be difficult

An iterative procedure for estimating areally averaged heat flux using planetary boundary layer mixed layer height and locally measured heat flux

Energy Technology Data Exchange (ETDEWEB)

Coulter, R. L.; Gao, W.; Lesht, B. M.

2000-04-04

Measurements at the central facility of the Southern Great Plains (SGP) Cloud and Radiation Testbed (CART) are intended to verify, improve, and develop parameterizations in radiative flux models that are subsequently used in General Circulation Models (GCMs). The reliability of this approach depends upon the representativeness of the local measurements at the central facility for the site as a whole or on how these measurements can be interpreted so as to accurately represent increasingly large scales. The variation of surface energy budget terms over the SGP CART site is extremely large. Surface layer measurements of the sensible heat flux (H) often vary by a factor of 2 or more at the CART site (Coulter et al. 1996). The Planetary Boundary Layer (PBL) effectively integrates the local inputs across large scales; because the mixed layer height (h) is principally driven by H, it can, in principal, be used for estimates of surface heat flux over scales on the order of tens of kilometers. By combining measurements of h from radiosondes or radar wind profiles with a one-dimensional model of mixed layer height, they are investigating the ability of diagnosing large-scale heat fluxes. The authors have developed a procedure using the model described by Boers et al. (1984) to investigate the effect of changes in surface sensible heat flux on the mixed layer height. The objective of the study is to invert the sense of the model.

JET Joint Undertaking

International Nuclear Information System (INIS)

Keen, B.E.; Kupschus, P.

1984-09-01

The report is in sections, as follows. (1) Introduction and summary. (2) A brief description of the origins of the JET Project within the EURATOM fusion programme and the objectives and aims of the device. The basic JET design and the overall philosophy of operation are explained and the first six months of operation of the machine are summarised. The Project Team Structure adopted for the Operation Phase is set out. Finally, in order to set JET's progress in context, other large tokamaks throughout the world and their achievements are briefly described. (3) The activities and progress within the Operation and Development Department are set out; particularly relating to its responsibilities for the operation and maintenance of the tokamak and for developing the necessary engineering equipment to enhance the machine to full performance. (4) The activities and progress within the Scientific Department are described; particularly relating to the specification, procurement and operation of diagnostic equipment; definition and execution of the programme; and the interpretation of experimental results. (5) JET's programme plans for the immediate future and a broad outline of the JET Development Plan to 1990 are given. (author)

JET joint undertaking

International Nuclear Information System (INIS)

1984-06-01

JET began operations on 25 June 1983. This annual report contains administrative information and a general review of scientific and technical developments. Among them are vacuum systems, toroidal and poloidal field systems, power supplies, neutral beam heating, radiofrequency heating, remote handling, tritium handling, control and data acquisition systems and diagnostic systems

JET Joint Undertaking

International Nuclear Information System (INIS)

Keen, B.E.

1986-03-01

This is an overview summary of the scientific and technical advances at JET during the year 1985, supplemented by appendices of detailed contributions (in preprint form) of eight of the more important JET articles produced during that year. It is aimed not only at specialists and experts but also at a more general scientific community. Thus there is a brief summary of the background to the project, a description of the basic objectives of JET and the principle design features of the machine. The new structure of the Project Team is also explained. Developments and future plans are included. Improvements considered are those which are designed to overcome certain limitations encountered generally on Tokamaks, particularly those concerned with density limits, with plasma MHD behaviour, with impurities and with plasma transport. There is also a complete list of articles, reports and conference papers published in 1985 - there are 167 such items listed. (UK)

JET Joint Undertaking

International Nuclear Information System (INIS)

Keen, B.E.

1988-03-01

The paper is a JET progress report 1987, and covers the fourth full year of JET's operation. The report contains an overview summary of the scientific and technical advances during the year, and is supplemented by appendices of detailed contributions of the more important JET articles published during 1987. The document is aimed at specialists and experts engaged in nuclear fusion and plasma physics, as well as the general scientific community. (U.K.)

Creatine kinase rate constant in the human heart measured with 3D-localization at 7 tesla.

Science.gov (United States)

Clarke, William T; Robson, Matthew D; Neubauer, Stefan; Rodgers, Christopher T

2017-07-01

We present a new Bloch-Siegert four Angle Saturation Transfer (BOAST) method for measuring the creatine kinase (CK) first-order effective rate constant k f in human myocardium at 7 tesla (T). BOAST combines a variant of the four-angle saturation transfer (FAST) method using amplitude-modulated radiofrequency pulses, phosphorus Bloch-Siegert B1+-mapping to determine the per-voxel flip angles, and nonlinear fitting to Bloch simulations for postprocessing. Optimal flip angles and repetition time parameters were determined from Monte Carlo simulations. BOAST was validated in the calf muscle of two volunteers at 3T and 7T. The myocardial CK forward rate constant was then measured in 10 volunteers at 7T in 82 min (after 1 H localization). BOAST kfCK values were 0.281 ± 0.002 s -1 in the calf and 0.35 ± 0.05 s -1 in myocardium. These are consistent with literature values from lower fields. Using a literature values for adenosine triphosphate concentration, we computed CK flux values of 4.55 ± 1.52 mmol kg -1 s -1 . The sensitive volume for BOAST depends on the B 1 inhomogeneity of the transmit coil. BOAST enables measurement of the CK rate constant in the human heart at 7T, with spatial localization in three dimensions to 5.6 mL voxels, using a 10-cm loop coil. Magn Reson Med 78:20-32, 2017. © 2016 The Authors Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited. © 2016 The Authors Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine.

Localized bioimpedance to assess muscle injury

International Nuclear Information System (INIS)

Nescolarde, L; Rosell-Ferrer, J; Yanguas, J; Lukaski, H; Alomar, X; Rodas, G

2013-01-01

Injuries to lower limb muscles are common among football players. Localized bioimpedance analysis (BIA) utilizes electrical measurements to assess soft tissue hydration and cell membrane integrity non-invasively. This study reports the effects of the severity of muscle injury and recovery on BIA variables. We made serial tetra-polar, phase-sensitive 50 kHz localized BIA measurements of quadriceps, hamstring and calf muscles of three male football players before and after injury and during recovery until return-to-play, to determine changes in BIA variables (resistance (R), reactance (Xc) and phase angle (PA)) in different degrees of muscle injury. Compared to non-injury values, R, Xc and PA decreased with increasing muscle injury severity: grade III (23.1%, 45.1% and 27.6%), grade II (20.6%, 31.6% and 13.3%) and grade I (11.9%, 23.5% and 12.1%). These findings indicate that decreases in R reflect localized fluid accumulation, and reductions in Xc and PA highlight disruption of cellular membrane integrity and injury. Localized BIA measurements of muscle groups enable the practical detection of soft tissue injury and its severity. (paper)

Cooperative Robot Localization Using Event-Triggered Estimation

Science.gov (United States)

Iglesias Echevarria, David I.

It is known that multiple robot systems that need to cooperate to perform certain activities or tasks incur in high energy costs that hinder their autonomous functioning and limit the benefits provided to humans by these kinds of platforms. This work presents a communications-based method for cooperative robot localization. Implementing concepts from event-triggered estimation, used with success in the field of wireless sensor networks but rarely to do robot localization, agents are able to only send measurements to their neighbors when the expected novelty in this information is high. Since all agents know the condition that triggers a measurement to be sent or not, the lack of a measurement is therefore informative and fused into state estimates. In the case agents do not receive either direct nor indirect measurements of all others, the agents employ a covariance intersection fusion rule in order to keep the local covariance error metric bounded. A comprehensive analysis of the proposed algorithm and its estimation performance in a variety of scenarios is performed, and the algorithm is compared to similar cooperative localization approaches. Extensive simulations are performed that illustrate the effectiveness of this method.

Local noise in a diffusive conductor

Science.gov (United States)

Tikhonov, E. S.; Shovkun, D. V.; Ercolani, D.; Rossella, F.; Rocci, M.; Sorba, L.; Roddaro, S.; Khrapai, V. S.

2016-07-01

The control and measurement of local non-equilibrium configurations is of utmost importance in applications on energy harvesting, thermoelectrics and heat management in nano-electronics. This challenging task can be achieved with the help of various local probes, prominent examples including superconducting or quantum dot based tunnel junctions, classical and quantum resistors, and Raman thermography. Beyond time-averaged properties, valuable information can also be gained from spontaneous fluctuations of current (noise). From these perspective, however, a fundamental constraint is set by current conservation, which makes noise a characteristic of the whole conductor, rather than some part of it. Here we demonstrate how to remove this obstacle and pick up a local noise temperature of a current biased diffusive conductor with the help of a miniature noise probe. This approach is virtually noninvasive for the electronic energy distributions and extends primary local measurements towards strongly non-equilibrium regimes.

Initiating change locally in bullying and aggression through the school environment (INCLUSIVE) trial: update to cluster randomised controlled trial protocol.

Science.gov (United States)

Bonell, Chris; Mathiot, Anne; Allen, Elizabeth; Bevilacqua, Leonardo; Christie, Deborah; Elbourne, Diana; Fletcher, Adam; Grieve, Richard; Legood, Rosa; Scott, Stephen; Warren, Emily; Wiggins, Meg; Viner, Russell M

2017-05-25

Systematic reviews suggest that multi-component interventions are effective in reducing bullying victimisation and perpetration. We are undertaking a phase III randomised trial of the INCLUSIVE multi-component intervention. This trial aims to assess the effectiveness and cost-effectiveness of the INCLUSIVE intervention in reducing aggression and bullying victimisation in English secondary schools. This paper updates the original trial protocol published in 2014 (Trials 15:381, 2014) and presents the changes in the process evaluation protocol and the secondary outcome data collection. The methods are summarised as follows. cluster randomised trial. 40 state secondary schools. Outcomes assessed among the cohort of students at the end of year 7 (n = 6667) at baseline. INCLUSIVE is a multi-component school intervention including a social and emotional learning curriculum, changes to school environment (an action group comprising staff and students reviews local data on needs to review rules and policies and determine other local actions) and staff training in restorative practice. The intervention will be delivered by schools supported in the first two years by educational facilitators independent of the research team, with a third intervention year involving no external facilitation but all other elements. Comparator: normal practice. Primary: Two primary outcomes at student level assessed at baseline and at 36 months: 1. Aggressive behaviours in school: Edinburgh Study of Youth Transitions and Crime school misbehaviour subscale (ESYTC) 2. Bullying and victimisation: Gatehouse Bullying Scale (GBS) Secondary outcomes assessed at baseline, 24 and 36 months will include measures relating to the economic evaluation, psychosocial outcomes in students and staff and school-level truancy and exclusion rates. 20 schools per arm will provide 90% power to identify an effect size of 0.25 SD with a 5% significance level. Randomisation: eligible consenting schools were

Theory of non-hermitian localization in one dimension: Localization ...

Indian Academy of Sciences (India)

of the finite depinning field H . The degree of depinning is measured by the averaged .... system [2] shows a direct relationship between the localization length of the ... tight-binding model in a non-hermitian field h, where the discrete sites n, ..... shows that complex eigenvalues do not appear for field strengths less thanh2.

Estimation of combined sewer overflow discharge: a software sensor approach based on local water level measurements.

Science.gov (United States)

Ahm, Malte; Thorndahl, Søren; Nielsen, Jesper E; Rasmussen, Michael R

2016-12-01

Combined sewer overflow (CSO) structures are constructed to effectively discharge excess water during heavy rainfall, to protect the urban drainage system from hydraulic overload. Consequently, most CSO structures are not constructed according to basic hydraulic principles for ideal measurement weirs. It can, therefore, be a challenge to quantify the discharges from CSOs. Quantification of CSO discharges are important in relation to the increased environmental awareness of the receiving water bodies. Furthermore, CSO discharge quantification is essential for closing the rainfall-runoff mass-balance in combined sewer catchments. A closed mass-balance is an advantage for calibration of all urban drainage models based on mass-balance principles. This study presents three different software sensor concepts based on local water level sensors, which can be used to estimate CSO discharge volumes from hydraulic complex CSO structures. The three concepts were tested and verified under real practical conditions. All three concepts were accurate when compared to electromagnetic flow measurements.

Measurement of local interfacial area concentration in boiling loop

International Nuclear Information System (INIS)

Kyoung, Ho Kang; Byong, Jo Yun; Goon, Cherl Park

1995-01-01

An accurate prediction of two-phase flow is essential to many energy systems, including nuclear reactors. To model the two-phase flow, detailed information on the internal flow structure is required. The void fraction and interfacial area concentration are important fundamental parameters characterizing the internal structure of two-phase flow. The interfacial area concentration is defined as the available interfacial area per unit volume of the two-phase mixture in calculations of the interfacial transport of mass, momentum, and energy. Although a number of studies have been made in this area, the interfacial area concentration in two-phase flow has not been sufficiently investigated either experimentally or analytically. Most existing models for interfacial area concentration are limited to area-averaged interfacial area concentration in a flow channel. And the studies on local interfacial area concentration are limited to the case of air-water two-phase flow. However, the internal flow structure of steam-water two-phase flow having various bubble sizes could be quite different from that of air-water two-phase flow, the reliability of which weak in practical applications. In this study, the local interfacial area concentration steam-water two-phase flow has been investigated experimentally in a circular boiling tube having a heating rod in the center, and for the low flow with liquid superficial velocity <1 m/s

Postnatal changes in local cerebral blood flow measured by the quantitative autoradiographic [14C]iodoantipyrine technique in freely moving rats

International Nuclear Information System (INIS)

Nehlig, A.; Pereira de Vasconcelos, A.; Boyet, S.

1989-01-01

The postnatal changes in local cerebral blood flow in freely moving rats were measured by means of the quantitative autoradiographic [ 14 C]iodoantipyrine method. The animals were studied at 10, 14, 17, 21 and 35 days and at the adult stage. At 10 days after birth, rates of blood flow were very low and quite homogeneous in most cerebral structures except in a few posterior areas. From these relatively uniform levels, values of local cerebral blood flow rose notably to reach a peak at 17 days in all brain regions studied. Rates of blood flow decreased between 17 and 21 days after birth and then increased from weaning time to reach the known characteristic distribution of the adult rat. The postnatal evolution of local cerebral blood in the rat is in good agreement with previous studies in other species such as dog and humans that also show higher rates of cerebral blood flow and glucose utilization at immature stages. However, in the rat, local cerebral blood flow and local cerebral glucose utilization are not coupled over the whole postnatal period studied, since blood flow rates reach peak values at 17 days whereas glucose utilization remains still quite low at that stage. The high rate of cerebral blood flow in the 17-day-old rat may reflect the energetic and biosynthetic needs of the actively developing brain that are completed by the summation of glucose and ketone body utilization

Sustainability in Health care by Allocating Resources Effectively (SHARE) 6: investigating methods to identify, prioritise, implement and evaluate disinvestment projects in a local healthcare setting.

Science.gov (United States)

Harris, Claire; Allen, Kelly; Brooke, Vanessa; Dyer, Tim; Waller, Cara; King, Richard; Ramsey, Wayne; Mortimer, Duncan

2017-05-25

This is the sixth in a series of papers reporting Sustainability in Health care by Allocating Resources Effectively (SHARE) in a local healthcare setting. The SHARE program was established to investigate a systematic, integrated, evidence-based approach to disinvestment within a large Australian health service. This paper describes the methods employed in undertaking pilot disinvestment projects. It draws a number of lessons regarding the strengths and weaknesses of these methods; particularly regarding the crucial first step of identifying targets for disinvestment. Literature reviews, survey, interviews, consultation and workshops were used to capture and process the relevant information. A theoretical framework was adapted for evaluation and explication of disinvestment projects, including a taxonomy for the determinants of effectiveness, process of change and outcome measures. Implementation, evaluation and costing plans were developed. Four literature reviews were completed, surveys were received from 15 external experts, 65 interviews were conducted, 18 senior decision-makers attended a data gathering workshop, 22 experts and local informants were consulted, and four decision-making workshops were undertaken. Mechanisms to identify disinvestment targets and criteria for prioritisation and decision-making were investigated. A catalogue containing 184 evidence-based opportunities for disinvestment and an algorithm to identify disinvestment projects were developed. An Expression of Interest process identified two potential disinvestment projects. Seventeen additional projects were proposed through a non-systematic nomination process. Four of the 19 proposals were selected as pilot projects but only one reached the implementation stage. Factors with potential influence on the outcomes of disinvestment projects are discussed and barriers and enablers in the pilot projects are summarised. This study provides an in-depth insight into the experience of disinvestment

Position Localization with Impulse Ultra Wide Band

National Research Council Canada - National Science Library

Zhang, Guoping; Rao, S. V

2005-01-01

...) bias and clock jittering error of TDOA measurement. In our prototype design, we exploit impulse UWB techniques to implement a very low cost localization system that can achieve centimeters localization for indoor applications...

PRESSURE EQUILIBRIUM BETWEEN THE LOCAL INTERSTELLAR CLOUDS AND THE LOCAL HOT BUBBLE

Energy Technology Data Exchange (ETDEWEB)

Snowden, S. L.; Chiao, M.; Collier, M. R.; Porter, F. S.; Thomas, N. E. [NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Cravens, T.; Robertson, I. P. [Department of Physics and Astronomy, University of Kansas, 1251 Wescoe Hall Drive, Lawrence, KS 66045 (United States); Galeazzi, M.; Uprety, Y.; Ursino, E. [Department of Physics, University of Miami, 1320 Campo Sano Drive, Coral Gables, FL 33146 (United States); Koutroumpa, D. [Université Versailles St-Quentin, Sorbonne Universités, UPMC Univ. Paris 06, CNRS/INSU, LATMOS-IPSL, 11 Boulevard d' Alembert, F-78280 Guyancourt (France); Kuntz, K. D. [The Henry A. Rowland Department of Physics and Astronomy, The Johns Hopkins University, Baltimore, MD 21218 (United States); Lallement, R.; Puspitarini, L. [GEPI, Observatoire de Paris, CNRS UMR8111, Université Paris Diderot, 5 Place Jules Janssen, F-92190 Meudon (France); Lepri, S. T. [University of Michigan, 2455 Hayward Street, Ann Arbor, MI 48109 (United States); McCammon, D.; Morgan, K. [Department of Physics, University of Wisconsin, 1150 University Avenue, Madison, WI 53706 (United States); Walsh, B. M., E-mail: steven.l.snowden@nasa.gov [Space Sciences Laboratory, 7 Gauss Way, Berkeley, CA 94720 (United States)

2014-08-10

Three recent results related to the heliosphere and the local interstellar medium (ISM) have provided an improved insight into the distribution and conditions of material in the solar neighborhood. These are the measurement of the magnetic field outside of the heliosphere by Voyager 1, the improved mapping of the three-dimensional structure of neutral material surrounding the Local Cavity using extensive ISM absorption line and reddening data, and a sounding rocket flight which observed the heliospheric helium focusing cone in X-rays and provided a robust estimate of the contribution of solar wind charge exchange emission to the ROSAT All-Sky Survey 1/4 keV band data. Combining these disparate results, we show that the thermal pressure of the plasma in the Local Hot Bubble (LHB) is P/k = 10, 700 cm{sup –3} K. If the LHB is relatively free of a global magnetic field, it can easily be in pressure (thermal plus magnetic field) equilibrium with the local interstellar clouds, eliminating a long-standing discrepancy in models of the local ISM.

The geometric phase analysis method based on the local high resolution discrete Fourier transform for deformation measurement

International Nuclear Information System (INIS)

Dai, Xianglu; Xie, Huimin; Wang, Huaixi; Li, Chuanwei; Wu, Lifu; Liu, Zhanwei

2014-01-01

The geometric phase analysis (GPA) method based on the local high resolution discrete Fourier transform (LHR-DFT) for deformation measurement, defined as LHR-DFT GPA, is proposed to improve the measurement accuracy. In the general GPA method, the fundamental frequency of the image plays a crucial role. However, the fast Fourier transform, which is generally employed in the general GPA method, could make it difficult to locate the fundamental frequency accurately when the fundamental frequency is not located at an integer pixel position in the Fourier spectrum. This study focuses on this issue and presents a LHR-DFT algorithm that can locate the fundamental frequency with sub-pixel precision in a specific frequency region for the GPA method. An error analysis is offered and simulation is conducted to verify the effectiveness of the proposed method; both results show that the LHR-DFT algorithm can accurately locate the fundamental frequency and improve the measurement accuracy of the GPA method. Furthermore, typical tensile and bending tests are carried out and the experimental results verify the effectiveness of the proposed method. (paper)

Local Governance and Corruption

OpenAIRE

Marius PROFIROIU; Tudorel ANDREI; Gheorghe POPESCU; Alina PROFIROIU

2006-01-01

This paper attempts to examine, from the Romanian perspective, the degree to which decentralization process and improvement of local governance contributes to the reduction of corruption in the short and medium term. Through the methodology that is used the paper is consistent with the international trend that endeavors to analyze the impact of corruption on economic and social processes at the local level. In addition, recent research on corruption issues has focused upon the measurement of ...

THE STRUCTURE OF THE LOCAL HOT BUBBLE

Energy Technology Data Exchange (ETDEWEB)

Liu, W.; Galeazzi, M.; Uprety, Y.; Ursino, E. [Department of Physics, University of Miami, Coral Gables, FL, 33124 (United States); Chiao, M.; Collier, M. R.; Porter, F. S.; Snowden, S. L.; Thomas, N. E. [NASA Goddard Space Flight Center, Greenbelt, MD, 20771 (United States); Cravens, T. [Department of Physics and Astronomy, University of Kansas, Lawrence, KS 66045 (United States); Koutroumpa, D. [Universite Versailles St-Quentin (France); Sorbonne Universites, UPMC Univ. Paris 06 (France); CNRS/INSU, LATMOS-IPSL, F-78280 (France); Kuntz, K. D. [The Henry A. Rowland Department of Physics and Astronomy, Johns Hopkins University, Baltimore, MD 21218 (United States); Lallement, R. [GEPI Observatoire de Paris, CNRS, Universite Paris Diderot, F-92190, Meudon (France); Lepri, S. T. [Department of Atmospheric, Oceanic, and Space Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); McCammon, D.; Morgan, K. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States); Walsh, B. M., E-mail: galeazzi@physics.miami.edu [Department of Mechanical Engineering, Boston University, Boston, MA 02215 (United States)

2017-01-01

Diffuse X-rays from the Local Galaxy ( DXL ) is a sounding rocket mission designed to quantify and characterize the contribution of Solar Wind Charge eXchange (SWCX) to the Diffuse X-ray Background and study the properties of the Local Hot Bubble (LHB). Based on the results from the DXL mission, we quantified and removed the contribution of SWCX to the diffuse X-ray background measured by the ROSAT All Sky Survey. The “cleaned” maps were used to investigate the physical properties of the LHB. Assuming thermal ionization equilibrium, we measured a highly uniform temperature distributed around kT  = 0.097 keV ± 0.013 keV (FWHM) ± 0.006 keV (systematic). We also generated a thermal emission measure map and used it to characterize the three-dimensional (3D) structure of the LHB, which we found to be in good agreement with the structure of the local cavity measured from dust and gas.

Phased Array Noise Source Localization Measurements of an F404 Nozzle Plume at Both Full and Model Scale

Science.gov (United States)

Podboy, Gary G.; Bridges, James E.; Henderson, Brenda S.

2010-01-01

A 48-microphone planar phased array system was used to acquire jet noise source localization data on both a full-scale F404-GE-F400 engine and on a 1/4th scale model of a F400 series nozzle. The full-scale engine test data show the location of the dominant noise sources in the jet plume as a function of frequency for the engine in both baseline (no chevron) and chevron configurations. Data are presented for the engine operating both with and without afterburners. Based on lessons learned during this test, a set of recommendations are provided regarding how the phased array measurement system could be modified in order to obtain more useful acoustic source localization data on high-performance military engines in the future. The data obtained on the 1/4th scale F400 series nozzle provide useful insights regarding the full-scale engine jet noise source mechanisms, and document some of the differences associated with testing at model-scale versus fullscale.

A class of free locally convex spaces

International Nuclear Information System (INIS)

Sipacheva, O V

2003-01-01

Stratifiable spaces are a natural generalization of metrizable spaces for which Dugundji's theorem holds. It is proved that the free locally convex space of a stratifiable space is stratifiable. This means, in particular, that the space of finitely supported probability measures on a stratifiable space is a retract of a locally convex space, and that each stratifiable convex subset of a locally convex space is a retract of a locally convex space

AFSC/REFM: Pacific cod Localized Depletion Study

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Localized Depletion study for Pacific cod 2001-2005. Study was conducted using cod pot gear to measure localized abundance of Pacific cod inside and...