Institutionalizing environmental due diligence as part of the organization's culture: The Suncor Oil Sands Group experience

International Nuclear Information System (INIS)

Allen, R.; Klym, D.

1992-01-01

The Suncor Oil Sands Group produces ca 22 million bbl/y of synthetic crude oil from oil sands in northern Alberta. Initiatives taken by the Group to install environmental due diligence as an integral part of Suncor culture are reviewed. Environmental due diligence means taking all reasonable care to safeguard the environment. To practice environmental due diligence, the organization and its members must have an environmental consciousness that can be observed, measured, and monitored through daily practices. In the period from startup of the oil sands plant in 1967 to the mid-1970s, Suncor culture could be described as research oriented, oriented toward examination of the viability of extracting oil from the oil sands and the development of new extraction processes. Management then moved toward a more production-based culture, in which environmental issues were sometimes perceived to be in conflict with production goals. External factors toward the end of the 1980s created a culture shift to an integration of production culture with social entities including environmental consciousness. A corporate push toward a new environmental culture was first concretized when the management's Health and Safety Policy was changed in 1990 to the Health, Safety and Environment Policy. A new Environmental Diligence Program was implemented in three phases, including planning, development of a comprehensive environmental management system, and implementation. Installation of the Program in the first phase is described, focusing on employee and management training, and results of the installation process are presented. Modifications of Suncor's loss control management program to integrate with the environmental diligence program are also noted. 2 refs

Can yeast glycolysis be understood in terms of in vitro kinetics of the constituent enxymes? Testing biochemistry.

NARCIS (Netherlands)

Teusink, B.; Passarge, J.R.; Reijenga, C.A.; Esgalhado, M.E.L.M.; van der Weijden, C.C.; Schepper, M.; Walsh, M.C.; Bakker, B.M.; van Dam, K.; Westerhoff, H.V.; Snoep, J.L.

2000-01-01

This paper examines whether the in vivo behavior of yeast glycolysis can be understood in terms of the in vitro kinetic properties of the constituent enzymes. In nongrowing, anaerobic, compressed Saccharomyces cerevisiae the values of the kinetic parameters of most glycolytic enzymes were

Is restlessness best understood as a process? Reflecting on four boys’ restlessness during music therapy in kindergarten

Science.gov (United States)

Helle-Valle, Anna; Binder, Per-Einar; Anderssen, Norman; Stige, Brynjulf

2017-01-01

ABSTRACT ADHD can be considered an internationally recognized framework for understanding children’s restlessness. In this context, children’s restlessness is understood as a symptom of neurodevelopmental disorder. However, there are other possible understandings of children’s restlessness. In this article, we explore four boys’ collaborative and creative process as it is described and understood by three adults. The process is framed by a community music therapy project in a Norwegian kindergarten, and we describe four interrelated phases of this process: Exploring musical vitality and cooperation, Consolidating positions, Performing together, and Discovering ripple effects. We discuss these results in relation to seven qualities central to a community music therapy approach: participation, resource orientation, ecology, performance, activism, reflexivity and ethics. We argue that in contrast to a diagnostic approach that entails a focus on individual problems, a community music therapy approach can shed light on adult and systemic contributions to children’s restlessness. PMID:28532331

Dermatophytosis due to Microsporum nanum infection in a canine

OpenAIRE

Marilia Avila Valandro; João Paulo da Exaltação Pascon; Maria Lígia de Arruda Mistieri; Irina Lubeck

2017-01-01

Miscrosporum nanum is a dermatophyte found in swine that causes non-pruritic lesions with desquamation, alopecia, and circular characteristics. M. nanum infection in dogs is rare and poorly understood in terms of its epidemiological and clinical features, and its therapeutic response. The present report describes a case of dermatophytosis due to M. nanum in a Dogo Argentino breed of dog that was used for wild boar hunting. The dermatophytosis presented with hypotrichosis, erythema, and non-pr...

Preparing Instructional Designers for Game-Based Learning: Part 1

Science.gov (United States)

Hirumi, Atsusi; Appelman, Bob; Rieber, Lloyd; Van Eck, Richard

2010-01-01

Like many rapidly growing industries, advances in video game technology are far outpacing research on its design and effectiveness. Relatively little is understood about how to apply what we know about teaching and learning to optimize game-based learning. For the most part, instructional designers know little about game development and video game…

Improvement of the efficiency of the Agnew micro hydro turbine at part loads due to installing guide vanes mechanism

Energy Technology Data Exchange (ETDEWEB)

Yassi, Yousef; hashemloo, Safar [Iranian Research Organization for Science and Technology (IROST), No. 29 Forssat St., Enghelaab Ave., Tehran (Iran)

2010-10-15

Agnew turbine is an axial micro hydro of Kaplan type, with its main shaft subtending 45 to the line of horizon. Due to governmental power generating programs for limited hydro potentials in Iran and on the basis of a joint project between the University of Glasgow and the Iranian Research Organization for Science and Technology (IROST), the turbine was developed to operate under low heads and limited flow potentials in Iran. However the turbine was originally designed to operate without any guide vanes and test results showed that the turbine achieved an efficiency of 62% at its best point of performance. Later a modified Agnew turbine, consisting of a guide blades mechanism was designed and manufactured, at (IROST). The mechanism was so designed that it was also used as a second support for the turbine's main shaft. The standard turbine tests proved that; the modified version of the Agnew turbine had 23% higher efficiency at its best performance point; compared to the original design. Then the effects of the improvements on the turbine were studied on the performance of the turbine at part loads. However, efficiency improvements were observed under all part load conditions. (author)

Improvement of the efficiency of the Agnew micro hydro turbine at part loads due to installing guide vanes mechanism

International Nuclear Information System (INIS)

Yassi, Yousef; Hashemloo, Safar

2010-01-01

Agnew turbine is an axial micro hydro of Kaplan type, with its main shaft subtending 45 deg. to the line of horizon. Due to governmental power generating programs for limited hydro potentials in Iran and on the basis of a joint project between the University of Glasgow and the Iranian Research Organization for Science and Technology (IROST), the turbine was developed to operate under low heads and limited flow potentials in Iran. However the turbine was originally designed to operate without any guide vanes and test results showed that the turbine achieved an efficiency of 62% at its best point of performance. Later a modified Agnew turbine, consisting of a guide blades mechanism was designed and manufactured, at (IROST). The mechanism was so designed that it was also used as a second support for the turbine's main shaft. The standard turbine tests proved that; the modified version of the Agnew turbine had 23% higher efficiency at its best performance point; compared to the original design. Then the effects of the improvements on the turbine were studied on the performance of the turbine at part loads. However, efficiency improvements were observed under all part load conditions.

Revealing metabolomic variations in Cortex Moutan from different root parts using HPLC-MS method.

Science.gov (United States)

Xiao, Chaoni; Wu, Man; Chen, Yongyong; Zhang, Yajun; Zhao, Xinfeng; Zheng, Xiaohui

2015-01-01

The distribution of metabolites in the different root parts of Cortex Moutan (the root bark of Paeonia suffruticosa Andrews) is not well understood, therefore, scientific evidence is not available for quality assessment of Cortex Moutan. To reveal metabolomic variations in Cortex Moutan in order to gain deeper insights to enable quality control. Metabolomic variations in the different root parts of Cortex Moutan were characterised using high-performance liquid chromatography combined with mass spectrometry (HPLC-MS) and multivariate data analysis. The discriminating metabolites in different root parts were evaluated by the one-way analysis of variance and a fold change parameter. The metabolite profiles of Cortex Moutan were largely dominated by five primary and 41 secondary metabolites . Higher levels of malic acid, gallic acid and mudanoside-B were mainly observed in the second lateral roots, whereas dihydroxyacetophenone, benzoyloxypaeoniflorin, suffruticoside-A, kaempferol dihexoside, mudanpioside E and mudanpioside J accumulated in the first lateral and axial roots. The highest contents of paeonol, galloyloxypaeoniflorin and procyanidin B were detected in the axial roots. Accordingly, metabolite compositions of Cortex Moutan were found to vary among different root parts. The axial roots have higher quality than the lateral roots in Cortex Moutan due to the accumulation of bioactive secondary metabolites associated with plant physiology. These findings provided important scientific evidence for grading Cortex Moutan on the general market. Copyright © 2014 John Wiley & Sons, Ltd.

The Short-term Therapeutic Effect of the Three-part Massotherapy for Insomnia Due to Deficiency of Both the Heart and the Spleen- A Report of 100 Cases

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

Objective: To evaluate the short-term therapeutic effect of the three-part massotherapy on insomnia due to deficiency of both the heart and spleen. Methods: Two hundred cases were randomly divided into a treatment group and a control group, each consisting of 100 cases. Patients in the treatment group were treated with the three-part massotherapy, while those in the control group with oral administration of Guipi Wan (归脾丸Pill for Invigorating the Spleen and Nourishing the Heart). The total clinical therapeutic effects, the total scores of Pittsburgh Sleep Quality Index (PSQI), Self-rating Anxiety Scale (SAS), and Self-rating Depression Scale (SDS) of the treatment group were compared with those of the control group. Results: After the treatment, the total therapeutic effects, PSQI, SAS, and SDS of the two groups all showed significant improvement (P<0.01), and the scores of the treatment group were superior to those of the control group (P<0.01). Conclusion: The three-part massotherapy has definite therapeutic effects on insomnia due to deficiency of both the heart and the spleen, which is safe and easy to operate, and worthy of popularization.

A theoretical approach to sputtering due to molecular ion bombardment, 1

International Nuclear Information System (INIS)

Karashima, Shosuke; Ootoshi, Tsukuru; Kamiyama, Masahide; Kim, Pil-Hyon; Namba, Susumu.

1981-01-01

A shock wave model is proposed to explain theoretically the non-linear effects in sputtering phenomena by molecular ion bombardments. In this theory the sputtering processes are separated into two parts; one is due to linear effects and another is due to non-linear effects. The treatment of the linear parts is based on the statistical model by Schwarz and Helms concerning a broad range of atomic collision cascades. The non-linear parts are treated by the model of shock wave due to overlapping cascades, and useful equations to calculate the sputtering yields and the dynamical quantities in the system are derived. (author)

Technical Due Diligence

DEFF Research Database (Denmark)

Jensen, Per Anker; Varano, Mattia

2011-01-01

carried out for buyers or sellers involved in real estate transactions. It can also be part of mergers including real estate and other assets or part of facilities management outsourcing. This paper is based on a case study and an interview survey of companies involved in TDD consulting in Denmark......Technical Due Diligence (TDD) as an evaluation of the performance of constructed facilities has become an important new field of practice for consultants. Before the financial crisis started in autumn 2008 it represented the fastest growing activity in some consulting companies. TDD is mostly...... and Italy during 2009. The research identifies the current practice and compares it with the recommended practice in international guidelines. The current practice is very diverse and could in many cases be improved by a more structured approach and stricter adherence to international guidelines. However...

Differences in the occurrence and characteristics of injuries between full-time and part-time dancers.

Science.gov (United States)

Vassallo, Amy Jo; Pappas, Evangelos; Stamatakis, Emmanuel; Hiller, Claire E

2018-01-01

Professional dancers are at significant risk of injury due to the physical demands of their career. Despite their high numbers, the experience of injury in freelance or part-time dancers is not well understood. Therefore, the aim of this study was to examine the occurrence and characteristics of injury in part-time compared with full-time Australian professional dancers. Data were collected using a cross-sectional survey distributed to employees of small and large dance companies and freelance dancers in Australia. Statistical comparisons between full-time and part-time dancer demographics, dance training, injury prevalence and characteristics were made using χ 2 , two-tailed Fisher's exact tests, independent t-tests and Mann-Whitney U tests. A total of 89 full-time and 57 part-time dancers were included for analysis. A higher proportion of full-time dancers (79.8%) than part-time dancers (63.2%) experienced an injury that impacted on their ability to dance in the past 12 months (p=0.035). Injuries characteristics were similar between groups with fatigue being the most cited contributing factor. Part-time dancers took longer to seek treatment while a higher proportion of full-time dancers were unable to dance in any capacity following their injury. More full-time dancers sustained an injury in the past 12 months, and were unable to dance in any capacity following their injury. However injuries still commonly occurred in part-time dancers without necessarily a large volume of dance activity. Part-time dancers often access general community clinicians for treatment, who may need additional education to practically advise on appropriate return to dance.

Prediction of pressure tube fretting-wear damage due to fuel vibration

International Nuclear Information System (INIS)

Yetisir, M.; Fisher, N.J.

1997-01-01

Fretting marks between fuel bundle bearing pads and pressure tubes have been observed at the inlet end of some Darlington Nuclear Generating Station (NGS) and Bruce NGS fuel channels. The excitation mechanisms that lead to fretting are not fully understood. In this paper, the possibility of bearing pad-to-pressure tube fretting due to turbulence-induced motion of the fuel element is investigated. Numerical simulations indicate that this mechanism by itself is not likely to cause the level of fretting experienced in Darlington and Bruce NGSs. (orig.)

Laser beam welding of titanium additive manufactured parts

OpenAIRE

Wits, Wessel Willems; Jauregui Becker, Juan Manuel

2015-01-01

In this paper the joinability of titanium Additive Manufactured (AM) parts is explored. Keyhole welding, using a pulsed laser beam, of conventionally produced parts is compared to AM parts. Metal AM parts are notorious for having remaining porosities and other non-isotropic properties due to the layered manufacturing process. This study shows that due to these deficiencies more energy per unit weld length is required to obtain a similar keyhole geometry for titanium AM parts. It is also demon...

The Late Ordovician Extinction: How it became the best understood of the five major extinctions.

Science.gov (United States)

Sheehan, P.

2003-04-01

The end Ordovician extinction has become arguably the best-understood major extinction event in Earth History. A plethora of workers have established the pattern of faunal change and causes of the extinction with remarkably little disagreement. The first indication of increased extinction at the end of the Ordovician was a graph of global diversity patterns by Norman Newell in 1967, although he did not recognize it as a major event. The presence of a major extinction event became clear as William Berry and Art Boucot assembled data for Silurian correlation charts in the late 1960s. The first reports of North African glaciation in the late 1960s provided a cause for the extinction and study of the event snowballed. It was no accident that recognition of the extinction began in North America, because it was there that the extinction completely overturned faunas in the epicontinental seas. Glacio-eustatic regression of shallow seaway coincided with the disappearance of endemic Laurentian faunas and replacement by a highly cosmopolitan fauna in the Silurian. Once the event was established in North America, paleontologists soon found evidence of the event around the globe. The well-documented Hirnantia Fauna was found to correspond to the glacial interval, and Pat Brenchley soon recognized that there were two pulses of extinction, at the beginning and end of the glaciation. At the same time that the faunal changes were being documented geologic studies of the glaciation provided information on the environmental changes associated with the extinction. The timing of the glacial maximum was established in Africa and by the presence of dropstones in high latitude marine rocks. The 1990s saw geochemical techniques employed that allowed examination of atmospheric CO2 and temperature changes. In many places carbonate deposition declined. Glacio-eustatic regression was obvious in many areas, and a sea-level decline in the range of 50-100 m was established. Shallow

Poorly understood and often miscategorized congenital umbilical cord hernia: an alternative repair method.

Science.gov (United States)

İnce, E; Temiz, A; Ezer, S S; Gezer, H Ö; Hiçsönmez, A

2017-06-01

Umbilical cord hernia is poorly understood and often miscategorized as "omphalocele minor". Careless clamping of the cord leads to iatrogenic gut injury in the situation of umbilical cord hernia. This study aimed to determine the characteristics and outcomes of umbilical cord hernias. We also highlight an alternative repair method for umbilical cord hernias. We recorded 15 cases of umbilical cord hernias over 10 years. The patients' data were retrospectively reviewed, and preoperative preparation of the newborn, gestational age, birth weight, other associated malformations, surgical technique used, enteral nutrition, and length of hospitalization were recorded. This study included 15 neonates with umbilical cord hernias. The mean gestational age at the time of referral was 38.2 ± 2.1

The Creativity of Natural Selection? Part I: Darwin, Darwinism, and the Mutationists.

Science.gov (United States)

Beatty, John

2016-12-01

This is the first of a two-part essay on the history of debates concerning the creativity of natural selection, from Darwin through the evolutionary synthesis and up to the present. Here I focus on the mid-late nineteenth century to the early twentieth, with special emphasis on early Darwinism and its critics, the self-styled "mutationists." The second part focuses on the evolutionary synthesis and some of its critics, especially the "neutralists" and "neo-mutationists." Like Stephen Gould, I consider the creativity of natural selection to be a key component of what has traditionally counted as "Darwinism." I argue that the creativity of natural selection is best understood in terms of (1) selection initiating evolutionary change, and (2) selection being responsible for the presence of the variation it acts upon, for example by directing the course of variation. I consider the respects in which both of these claims sound non-Darwinian, even though they have long been understood by supporters and critics alike to be virtually constitutive of Darwinism.

40 CFR Table 1 to Subpart B of... - Section 112(j) Part 2 Application Due Dates

Science.gov (United States)

2010-07-01

... Chemical Manufacturing (MON).1 Organic Liquids Distribution.Primary Magnesium Refining. Metal Can (Surface Coating). Plastic Parts and Products (Surface Coating). Chlorine Production. Miscellaneous Metal Parts and..., Institutional/Commercial Boilers, and Process Heaters.5 Hydrochloric Acid Production.6 1 Covers 23 source...

Prediction of pressure tube fretting-wear damage due to fuel vibration

Energy Technology Data Exchange (ETDEWEB)

Yetisir, M; Fisher, N J [Atomic Energy of Canada Ltd., Chalk River, ON (Canada)

1996-12-31

Fretting marks between fuel bundle bearing pads and pressure tubes have been observed at the inlet end of some Darlington NGS (nuclear generating station) and Bruce NGS fuel channels. The excitation mechanisms that lead to fretting are not fully understood. In this paper, the possibility of bearing pad-to-pressure tube fretting due to turbulence-induced motion of the fuel element is investigated. Numerical simulations indicate that this mechanism by itself is not likely to cause the level of fretting experienced in Darlington and Bruce NGS`s (nuclear generating stations). (author). 12 refs., 2 tabs., 11 figs.

Part-whole reasoning in medical ontologies revisited--introducing SEP triplets into classification-based description logics.

OpenAIRE

Schulz, S.; Romacker, M.; Hahn, U.

1998-01-01

The development of powerful and comprehensive medical ontologies that support formal reasoning on a large scale is one of the key requirements for clinical computing in the next millennium. Taxonomic medical knowledge, a major portion of these ontologies, is mainly characterized by generalization and part-whole relations between concepts. While reasoning in generalization hierarchies is quite well understood, no fully conclusive mechanism as yet exists for part-whole reasoning. The approach w...

The market of human organs: a window into a poorly understood global business.

Science.gov (United States)

Surman, O S; Saidi, R; Purtilo, R; Simmerling, M; Ko, D; Burke, T F

2008-03-01

The global demand for human organs has set the stage for an exploding and poorly understood global business in human organs. Whenever there is demand for a product, the opportunity for business arises. The form that a business takes is dependent on a complex network of inputs and outputs, each affecting the others. Historically, the details of any specific market are drastically underestimated. Nowhere is this truer than in the market of human organs. The drivers, which propel the "goods" of human organs, form a flourishing business. Critical analysis is essential to understanding of the supply and demand sides and to determine the role of government in regulating the industry. Governmental groups have dismissed formation of a regulated market for organ sales. The concept is nonetheless a topic of active discussion, motivated by the suffering of patients in need of organs and exploitation of the victims of human trafficking. Ethical principles have been invoked on each side of the ensuing debate. Theory in the absence of sufficient data is shaky ground for enactment of new policy. The Aristotelian concept of "practical wisdom" and the pragmatism of William James illuminate the importance of scientific investigation as guide to policy formation. How will stakeholders benefit or lose? What impact might be anticipated in regard to organized medicine's social contract? What can we learn about cross-cultural differences and their effect on the global landscape?

Part-whole reasoning in medical ontologies revisited--introducing SEP triplets into classification-based description logics.

Science.gov (United States)

Schulz, S; Romacker, M; Hahn, U

1998-01-01

The development of powerful and comprehensive medical ontologies that support formal reasoning on a large scale is one of the key requirements for clinical computing in the next millennium. Taxonomic medical knowledge, a major portion of these ontologies, is mainly characterized by generalization and part-whole relations between concepts. While reasoning in generalization hierarchies is quite well understood, no fully conclusive mechanism as yet exists for part-whole reasoning. The approach we take emulates part-whole reasoning via classification-based reasoning using SEP triplets, a special data structure for encoding part-whole relations that is fully embedded in the formal framework of standard description logics.

Emotions are understood from biological motion across remote cultures.

Science.gov (United States)

Parkinson, Carolyn; Walker, Trent T; Memmi, Sarah; Wheatley, Thalia

2017-04-01

Patterns of bodily movement can be used to signal a wide variety of information, including emotional states. Are these signals reliant on culturally learned cues or are they intelligible across individuals lacking exposure to a common culture? To find out, we traveled to a remote Kreung village in Ratanakiri, Cambodia. First, we recorded Kreung portrayals of 5 emotions through bodily movement. These videos were later shown to American participants, who matched the videos with appropriate emotional labels with above chance accuracy (Study 1). The Kreung also viewed Western point-light displays of emotions. After each display, they were asked to either freely describe what was being expressed (Study 2) or choose from 5 predetermined response options (Study 3). Across these studies, Kreung participants recognized Western point-light displays of anger, fear, happiness, sadness, and pride with above chance accuracy. Kreung raters were not above chance in deciphering an American point-light display depicting love, suggesting that recognizing love may rely, at least in part, on culturally specific cues or modalities other than bodily movement. In addition, multidimensional scaling of the patterns of nonverbal behavior associated with each emotion in each culture suggested that similar patterns of nonverbal behavior are used to convey the same emotions across cultures. The considerable cross-cultural intelligibility observed across these studies suggests that the communication of emotion through movement is largely shaped by aspects of physiology and the environment shared by all humans, irrespective of differences in cultural context. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Basic Substantive Law for Paralegals: Contracts, Torts, and Due Process.

Science.gov (United States)

Marcin, Raymond B.

Part of the paralegal, or legal assistant, training materials prepared by the National Paralegal Institution under a Federal grant, the text comprises an overview of the basic legal concepts usually found in introductory law courses concerning contracts, torts, and the due process area of constitutional law. Part 1, Contracts, covers: definition,…

A Model of Batch Scheduling for a Single Batch Processor with Additional Setups to Minimize Total Inventory Holding Cost of Parts of a Single Item Requested at Multi-due-date

Science.gov (United States)

Hakim Halim, Abdul; Ernawati; Hidayat, Nita P. A.

2018-03-01

This paper deals with a model of batch scheduling for a single batch processor on which a number of parts of a single items are to be processed. The process needs two kinds of setups, i. e., main setups required before processing any batches, and additional setups required repeatedly after the batch processor completes a certain number of batches. The parts to be processed arrive at the shop floor at the times coinciding with their respective starting times of processing, and the completed parts are to be delivered at multiple due dates. The objective adopted for the model is that of minimizing total inventory holding cost consisting of holding cost per unit time for a part in completed batches, and that in in-process batches. The formulation of total inventory holding cost is derived from the so-called actual flow time defined as the interval between arrival times of parts at the production line and delivery times of the completed parts. The actual flow time satisfies not only minimum inventory but also arrival and delivery just in times. An algorithm to solve the model is proposed and a numerical example is shown.

Contract Law, Due Process, and the NCAA.

Science.gov (United States)

Dickerson, Jaffe D.; Chapman, Mayer

1978-01-01

The NCAA has enjoyed almost total freedom from judicial scrutiny of its rules, procedures, and official acts in large part because of its private nature as an unincorporated association. The function of the NCAA, California State University, Hayward v NCAA, and due process of the student-athlete are discussed. (MLW)

Laser beam welding of titanium additive manufactured parts

NARCIS (Netherlands)

Wits, Wessel Willems; Jauregui Becker, Juan Manuel

2015-01-01

In this paper the joinability of titanium Additive Manufactured (AM) parts is explored. Keyhole welding, using a pulsed laser beam, of conventionally produced parts is compared to AM parts. Metal AM parts are notorious for having remaining porosities and other non-isotropic properties due to the

System-theoretic analysis of due-time performance in production systems

OpenAIRE

Jacobs David; Meerkov Semyon M.

1995-01-01

Along with the average production rate, the due-time performance is an important characteristic of manufacturing systems. Unlike the production rate, the due-time performance has received relatively little attention in the literature, especially in the context of large volume production. This paper is devoted to this topic. Specifically, the notion of due-time performance is formalized as the probability that the number of parts produced during the shipping period reaches the required shipme...

Navigating the grounded theory terrain. Part 1.

Science.gov (United States)

Hunter, Andrew; Murphy, Kathy; Grealish, Annmarie; Casey, Dympna; Keady, John

2011-01-01

The decision to use grounded theory is not an easy one and this article aims to illustrate and explore the methodological complexity and decision-making process. It explores the decision making of one researcher in the first two years of a grounded theory PhD study looking at the psychosocial training needs of nurses and healthcare assistants working with people with dementia in residential care. It aims to map out three different approaches to grounded theory: classic, Straussian and constructivist. In nursing research, grounded theory is often referred to but it is not always well understood. This confusion is due in part to the history of grounded theory methodology, which is one of development and divergent approaches. Common elements across grounded theory approaches are briefly outlined, along with the key differences of the divergent approaches. Methodological literature pertaining to the three chosen grounded theory approaches is considered and presented to illustrate the options and support the choice made. The process of deciding on classical grounded theory as the version best suited to this research is presented. The methodological and personal factors that directed the decision are outlined. The relative strengths of Straussian and constructivist grounded theories are reviewed. All three grounded theory approaches considered offer the researcher a structured, rigorous methodology, but researchers need to understand their choices and make those choices based on a range of methodological and personal factors. In the second article, the final methodological decision will be outlined and its research application described.

Happiness in Economics as Understood Across Ism and Religion

Directory of Open Access Journals (Sweden)

Abdul Ghafar Ismail

2014-12-01

Full Text Available The concept of happiness has been discussed long time ago by economists. Recently, it became the most related and important thing to be studied because of its impact in societies. Discussion about happiness basically interprets within two separate views. First, happiness related with economic variable, for instance, how money can create happiness. Second happiness is discussed within the context of religion. However, the discussion did not combine both contexts, economic variable and religion, to interpret happiness. Therefore, it is important to highlight the concept of happiness in a different way such as in this article. Different cultures will have their own perspective on the determination of happiness. From just “individual perspective” of happiness, they then formed an ism through involvement of a big society from the same culture. Some isms such as hedonism and materialism are synonyms in characterizing the concept of happiness in this modern world. At the same time, the isms are actually working with the economic and non-economic indicators as elements to strengthen the ism itself. On the other hand, the concept of happiness from the perspective of religion will also be a part of discussion in this article. Therefore, this article will reveal that the meaning of happiness is different in terms of religion and ism. So, to carry out both ism and religion simultaneously in shaping a more intrinsic value of happiness is not an easy task. Furthermore, religion is always associated with spiritual value that makes it hard for some people to practice religion and their isms at the same time. Thus, this article will propose that the right interpretation of isms based on their faith in religion can contribute to the concept of genuine happiness.

Developing Human-Computer Interface Models and Representation Techniques(Dialogue Management as an Integral Part of Software Engineering)

OpenAIRE

Hartson, H. Rex; Hix, Deborah; Kraly, Thomas M.

1987-01-01

The Dialogue Management Project at Virginia Tech is studying the poorly understood problem of human-computer dialogue development. This problem often leads to low usability in human-computer dialogues. The Dialogue Management Project approaches solutions to low usability in interfaces by addressing human-computer dialogue development as an integral and equal part of the total system development process. This project consists of two rather distinct, but dependent, parts. One is development of ...

Mediating water temperature increases due to livestock and global change in high elevation meadow streams of the Golden Trout Wilderness

Science.gov (United States)

Sebastien Nussle; Kathleen R. Matthews; Stephanie M. Carlson

2015-01-01

Rising temperatures due to climate change are pushing the thermal limits of many species, but how climate warming interacts with other anthropogenic disturbances such as land use remains poorly understood. To understand the interactive effects of climate warming and livestock grazing on water temperature in three high elevation meadow streams in the Golden Trout...

Acceleration Signal Characteristics for Intuitional Mass Analysis of Metallic Loose Parts

International Nuclear Information System (INIS)

Lee, Kwang-Hyun; Jung, Chang-Gyu

2016-01-01

Nuclear power plants (NPPs) have operated LPMS (Loose Parts Monitoring System) for early detection of the possible presence of metallic parts in the reactor coolant system (RCS); however, analysis of the metallic impact wave characteristics in the LPMS is an important issue because information, such as the mass of the metallic part and the impact location, is not provided. Most studies have concentrated on fieldwork using the frequency characteristics for the analysis of the metallic part mass. Thus, the field engineers cannot analyze signals without special software and access to the system. This paper is intended to introduce a process of intuitional mass analysis using the attenuation rate of the acceleration signal and the intervals between peak signals. Most studies related to mass analysis of a metallic part impact signal in LPMS have used the frequency spectrum. This paper presents a method of using the acceleration signal characteristics for intuitional mass analysis of loose metallic parts. With the method proposed in this paper, because the mass of a metallic part can be understood intuitionally without any special analysis program, intuitional analysis used in parallel with frequency spectrum analysis will be in effect

Acceleration Signal Characteristics for Intuitional Mass Analysis of Metallic Loose Parts

Energy Technology Data Exchange (ETDEWEB)

Lee, Kwang-Hyun; Jung, Chang-Gyu [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

Nuclear power plants (NPPs) have operated LPMS (Loose Parts Monitoring System) for early detection of the possible presence of metallic parts in the reactor coolant system (RCS); however, analysis of the metallic impact wave characteristics in the LPMS is an important issue because information, such as the mass of the metallic part and the impact location, is not provided. Most studies have concentrated on fieldwork using the frequency characteristics for the analysis of the metallic part mass. Thus, the field engineers cannot analyze signals without special software and access to the system. This paper is intended to introduce a process of intuitional mass analysis using the attenuation rate of the acceleration signal and the intervals between peak signals. Most studies related to mass analysis of a metallic part impact signal in LPMS have used the frequency spectrum. This paper presents a method of using the acceleration signal characteristics for intuitional mass analysis of loose metallic parts. With the method proposed in this paper, because the mass of a metallic part can be understood intuitionally without any special analysis program, intuitional analysis used in parallel with frequency spectrum analysis will be in effect.

Investigation into the influence of build parameters on failure of 3D printed parts

Science.gov (United States)

Fornasini, Giacomo

Additive manufacturing, including fused deposition modeling (FDM), is transforming the built world and engineering education. Deep understanding of parts created through FDM technology has lagged behind its adoption in home, work, and academic environments. Properties of parts created from bulk materials through traditional manufacturing are understood well enough to accurately predict their behavior through analytical models. Unfortunately, Additive Manufacturing (AM) process parameters create anisotropy on a scale that fundamentally affects the part properties. Understanding AM process parameters (implemented by program algorithms called slicers) is necessary to predict part behavior. Investigating algorithms controlling print parameters (slicers) revealed stark differences between the generation of part layers. In this work, tensile testing experiments, including a full factorial design, determined that three key factors, width, thickness, infill density, and their interactions, significantly affect the tensile properties of 3D printed test samples.

Reliability Based assessment of buildings under earthquakes due to gas extraction

NARCIS (Netherlands)

Steenbergen, R.D.J.M.; Vrouwenvelder, A.C.W.M.

2014-01-01

In the northern part of the Netherlands over de last decades shallow earthquakes are induced due to large scale gas extraction from the Groningen gas field. Earthquakes occur due to the compaction of the reservoir rock, which leads to subsidence at surface and strain build-up in the reservoir rock

Can delusions be understood linguistically?

Science.gov (United States)

Hinzen, Wolfram; Rosselló, Joana; McKenna, Peter

2016-07-01

Delusions are widely believed to reflect disturbed cognitive function, but the nature of this remains elusive. The "un-Cartesian" cognitive-linguistic hypothesis maintains (a) that there is no thought separate from language, that is, there is no distinct mental space removed from language where "thinking" takes place; and (b) that a somewhat broadened concept of grammar is responsible for bestowing meaning on propositions, and this among other things gives them their quality of being true or false. It is argued that a loss of propositional meaning explains why delusions are false, impossible and sometimes fantastic. A closely related abnormality, failure of linguistic embedding, can additionally account for why delusions are held with fixed conviction and are not adequately justified by the patient. The un-Cartesian linguistic approach to delusions has points of contact with Frith's theory that inability to form meta-representations underlies a range of schizophrenic symptoms. It may also be relevant to the nature of the "second factor" in monothematic delusions in neurological disease. Finally, it can inform the current debate about whether or not delusions really are beliefs.

Home is to be understood

DEFF Research Database (Denmark)

Buhl, Mie; Werner Hansen, Siv

2018-01-01

, and involved artists with refugee status (mainly from Syria), a group of local volunteers, and members of the museum staff. The project derived from the annual theme “ON THE MOVE” and culminated in an art exhibition and event on June 4th 2016. Up until then the museum had invited the artists to create artworks...... for the exhibition, while including the volunteers in the process, facilitating the meeting of those who are at home and those who are on the run. In this sense, the MFSK situates themselves as a social-political activist; a contemporary institution dealing with contemporary societal issues. The migrant and refugee...... of engaging with themes of refuge, home and exile? What are the implications of volunteering in such project? The paper’s discussions are framed by the theories of gallery education (Bishop, 2006; Mörsch, 2009), co-creation in museums (Simon, 2010), community arts (Kester, 2013), and draws on fieldwork...

Can delusions be understood linguistically?

Science.gov (United States)

Hinzen, Wolfram; Rosselló, Joana; McKenna, Peter

2016-01-01

ABSTRACT Delusions are widely believed to reflect disturbed cognitive function, but the nature of this remains elusive. The “un-Cartesian” cognitive-linguistic hypothesis maintains (a) that there is no thought separate from language, that is, there is no distinct mental space removed from language where “thinking” takes place; and (b) that a somewhat broadened concept of grammar is responsible for bestowing meaning on propositions, and this among other things gives them their quality of being true or false. It is argued that a loss of propositional meaning explains why delusions are false, impossible and sometimes fantastic. A closely related abnormality, failure of linguistic embedding, can additionally account for why delusions are held with fixed conviction and are not adequately justified by the patient. The un-Cartesian linguistic approach to delusions has points of contact with Frith’s theory that inability to form meta-representations underlies a range of schizophrenic symptoms. It may also be relevant to the nature of the “second factor” in monothematic delusions in neurological disease. Finally, it can inform the current debate about whether or not delusions really are beliefs. PMID:27322493

How flares can be understood

International Nuclear Information System (INIS)

Severny, A.B.

1977-01-01

Specific features of the flare phenomenon which are important for understanding of flares are the following: (1) Fine structure of visible emission of flares, especially at the very beginning and in the pre-flare active region. This structure can be seen also in later stages of development as bright points, some of which exist from the flare beginning (Babin's observations at Crimea, 1972-1976). (2) Turbulent motion with velocities up to 250-300 km s -1 as can be estimated from broadening of emission lines. (3) Predominantly red asymmetry of emission lines in the explosive phase and during further development of flares. (4) 'Supersonic' velocities and supergravitational accelerations of separate moving masses of the flare plasma. (5) The appearance of flares in areas with high grad H, exceeding 0.1 G km -1 which is equivalent to regions of electric currents > approximately 10 11 A. (6) Strong variations of net magnetic flux through the active region, as it follows from Meudon, Crimean, and Sacramento Peak (Rust's) observations. (Auth.)

We Have Not Understood Descartes.

Science.gov (United States)

Vallias, Andras

1996-01-01

Describes a personal involvement with digital media and the origins of the conception of the "diagrammatic" poem. Reflects on what is considered to be a poem in tune with today's computerized society. (PA)

Iatrogenic acute pancreatitis due to hypercalcemia in a child with pseudohypoparathyroidism.

Science.gov (United States)

Feyles, Francesca; Mussa, Alessandro; Peiretti, Valentina; Tessaris, Daniele; Santanera, Arianna; Corrias, Andrea; de Sanctis, Luisa; Calvo, Luigi

2014-01-01

Pancreatitis due to hypercalcemia is very rare in children, and its pathogenetic role is still debated. The following report describes a case of acute pancreatitis secondary to hypercalcemia in a 6-year-old boy with pseudohypoparathyroidism treated with calcium and vitamin D. Pseudohypoparathyroidism is characterized by parathormone (PTH) resistance, high PTH levels and hypocalcemia which need to be corrected with calcium and vitamin D supplementation. The patient was admitted for severe abdominal pain and vomiting associated with high plasma amylase, lipase and calcium levels. Hypercalcemia due to vitamin D and calcium overtreatment was probably responsible for the acute pancreatitis in this case. High serum calcium levels seem to sensitize patients to pancreatitis, even if the mechanism through which it happens is not completely understood. Moreover, the importance of concomitant predisposing factors, either acquired or especially genetic, needs to be further defined. Even though a rare occurance in childhood, hypercalcemia should be considered as a cause of pancreatitis and it should be examined together with the other etiologies that may contribute to the development of this disease.

MIRD methodology. Part 1

International Nuclear Information System (INIS)

Rojo, Ana M.

2004-01-01

This lecture develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this first part, the basic concepts and the main equations are presented. The ICRP Dosimetric System is also explained. (author)

Attribute conjunctions and the part configuration advantage in object category learning.

Science.gov (United States)

Saiki, J; Hummel, J E

1996-07-01

Five experiments demonstrated that in object category learning people are particularly sensitive to conjunctions of part shapes and relative locations. Participants learned categories defined by a part's shape and color (part-color conjunctions) or by a part's shape and its location relative to another part (part-location conjunctions). The statistical properties of the categories were identical across these conditions, as were the salience of color and relative location. Participants were better at classifying objects defined by part-location conjunctions than objects defined by part-color conjunctions. Subsequent experiments revealed that this effect was not due to the specific color manipulation or the role of location per se. These results suggest that the shape bias in object categorization is at least partly due to sensitivity to part-location conjunctions and suggest a new processing constraint on category learning.

The part task of the part-spacing paradigm is not a pure measurement of part-based information of faces.

Directory of Open Access Journals (Sweden)

Qi Zhu

Full Text Available BACKGROUND: Faces are arguably one of the most important object categories encountered by human observers, yet they present one of the most difficult challenges to both the human and artificial visual systems. A variety of experimental paradigms have been developed to study how faces are represented and recognized, among which is the part-spacing paradigm. This paradigm is presumed to characterize the processing of both the featural and configural information of faces, and it has become increasingly popular for testing hypotheses on face specificity and in the diagnosis of face perception in cognitive disorders. METHODOLOGY/PRINCIPAL FINDINGS: In two experiments we questioned the validity of the part task of this paradigm by showing that, in this task, measuring pure information about face parts is confounded by the effect of face configuration on the perception of those parts. First, we eliminated or reduced contributions from face configuration by either rearranging face parts into a non-face configuration or by removing the low spatial frequencies of face images. We found that face parts were no longer sensitive to inversion, suggesting that the previously reported inversion effect observed in the part task was due in fact to the presence of face configuration. Second, self-reported prosopagnosic patients who were selectively impaired in the holistic processing of faces failed to detect part changes when face configurations were presented. When face configurations were scrambled, however, their performance was as good as that of normal controls. CONCLUSIONS/SIGNIFICANCE: In sum, consistent evidence from testing both normal and prosopagnosic subjects suggests the part task of the part-spacing paradigm is not an appropriate task for either measuring how face parts alone are processed or for providing a valid contrast to the spacing task. Therefore, conclusions from previous studies using the part-spacing paradigm may need re-evaluation with

Traumatic oesophageal perforation due to haematoma

DEFF Research Database (Denmark)

Grønhøj Larsen, Christian; Brandt, Bodil

2014-01-01

. Three explanations postulated to be the cause for late perforation which might be due to esophageal wall ischemia from pressure built up between the hematoma, azygos vein and the lower part of thoracic trachea; or could be an immediate rupture walled-off until the patient became symptomatic......; or the intramural hematoma gradually lysed and causing late perforation. CONCLUSION: Although extremely rare, an oesophageal haematoma and late complications must be considered in patients on anti-coagulant therapy following blunt thoracic trauma and complaining only of chest pain....

Reduction in thermal conductivity of ceramics due to radiation damage

International Nuclear Information System (INIS)

Klemens, P.G.; Hurley, G.F.; Clinard, F.W. Jr.

1976-01-01

Ceramics are required for a number of applications in fusion reactors. In several of these applications, the thermal conductivity is an important design parameter as it affects the level of temperature and thermal stress in service. Ceramic insulators are known to suffer substantial reduction in thermal conductivity due to neutron irradiation damage. The present study estimates the reduction in thermal conductivity at high temperature due to radiation induced defects. Point, extended, and extended partly transparent defects are considered

In Silico Modelling of the Human Intestinal Microflora

NARCIS (Netherlands)

Kamerman, Derk Jan; Wilkinson, Michael H.F.

2002-01-01

The ecology of the human intestinal microflora and its interaction with the host are poorly understood. Though more and more data are being acquired, in part using modern molecular methods, development of a quantitative theory has not kept pace with this development. This is in part due to the

Meningococco B: controllo di due focolai epidemici mediante vaccinazione

Science.gov (United States)

2014-01-01

Riassunto La problematica di un efficace approccio vaccinale nei confronti del Meningococco B (MenB) è stata superata identificando con la metodica della "reverse vaccinology" alcuni antigeni capaci di indurre una risposta verso la maggior parte dei ceppi di MenB circolanti nel mondo. Il nuovo vaccino MenB a 4 componenti (4CMenB) è stato autorizzato in Europa, Australia e Canada, ed è entrato nei calendari di immunizzazione pediatrica internazionali: Australia, Canada, UK. In Italia, le prime regioni che hanno raccomandato la vaccinazione contro il MenB sono state Basilicata e Puglia. La gestione di epidemie/focolai epidemici richiede la messa in atto di una risposta rapida da parte delle autorità sanitarie nei confronti di una emergenza sanitaria ad elevato impatto, anche emotivo, sulla popolazione, come recentemente dimostrato in due università americane. Alla dichiarazione di focolaio epidemico in atto, in entrambi i contesti si è attivata una procedura per l'uso del vaccino 4CMenB non ancora autorizzato negli USA. È stato così possibile organizzare gli interventi di profilassi attiva nei due campus universitari, adottando il primo impiego su larga scala del nuovo vaccino 4CMenB e conseguendo, in tempi relativamente brevi, elevati tassi di copertura vaccinale. A fronte di circa 14000 studenti immunizzati con almeno una dose, non è stata segnalata alcuna problematica di eventi avversi conseguenti all'immunizzazione; ad oggi non si sono verificati casi nei soggetti che hanno ricevuto il vaccino. Come conseguenza dei due focolai descritti, è oggi in corso la valutazione da parte dell'FDA per l'estensione dell'uso del vaccino 4CMenB negli Stati Uniti negli adolescenti e giovani adulti. PMID:25916017

Urethritis due to corynebacterium striatum: An emerging germ.

Science.gov (United States)

Frikh, Mohammed; El Yaagoubi, Imad; Lemnouer, Abdelhay; Elouennass, Mostafa

2015-01-01

Corynedbacterium striatum (CS) is a Gram-positive coryneform bacillus that is part of mucous and skin flora. It has been considered as a causative agent of many infections in intensive care, neurology, traumatology and urology, but was never implicated in non-gonococcal urethritis. We report the case of a nosocomial urethritis due to Corynebacterium striatum following resection of an intrameatus condyloma.

Reviewing IT in due diligence are you buying an IT asset or liability

CERN Document Server

Wright, Christopher

2015-01-01

Reviewing IT in Due Diligence provides an introduction to IRM in due diligence, and outlines some of the key IT issues to consider as part of the due diligence process. For those new to the process, it explains how to conduct an IT due diligence review, from scoping to reporting, and includes information on post-merger integration to realise business benefits from the deal. For more experienced practitioners, Reviewing IT in Due Diligence provides fresh insight into the process, highlighting issues that need to be addressed, and provides a business case for IRM involvement in the due diligenc

The spares provisioning problem with parts inventory

OpenAIRE

Abboud, Nadim E.

1990-01-01

In this research, we consider the spares provisioning problem, where a finite population of homogeneous machines are being deployed to meet a constant demand. While a machine is operating, it could become inoperable due to the failure of a critical built-in part in the machine. Before repairs on the machine can be initiated, however, a replacement part must be obtained. If a replacement part is available from stock, the machine is immediately transferred to the repair subsystem...

Environmental problems associated with blasting in mines: public apprehensions of damage due to blast vibrations - case studies

Energy Technology Data Exchange (ETDEWEB)

Padhi, S.N. [DGMS, Bhubaneswar (India)

1994-12-31

Blast vibrations may be felt in intensities as small as 1/100 of that required to cause any damage to structures. Therefore, the public response and thus complaints regarding damages are often imaginary. The paper deals with three case studies, involving alleged damage from blasting in surface and underground coal mines where public litigations and agitations resulted due to such apprehensions. The paper is written in simple technical language as the situations warranted that the blast vibration studies should be understood by the general public. 7 tabs.

MIRD methodology. Part 2

International Nuclear Information System (INIS)

Gomez Parada, Ines

2004-01-01

This paper develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this second part, different methods for the calculation of the accumulated activity are presented, together with the effective half life definition. Different forms of Retention Activity curves are also shown. (author)

System-theoretic analysis of due-time performance in production systems

Directory of Open Access Journals (Sweden)

David Jacobs

1995-01-01

Full Text Available Along with the average production rate, the due-time performance is an important characteristic of manufacturing systems. Unlike the production rate, the due-time performance has received relatively little attention in the literature, especially in the context of large volume production. This paper is devoted to this topic. Specifically, the notion of due-time performance is formalized as the probability that the number of parts produced during the shipping period reaches the required shipment size. This performance index is analyzed for both lean and mass manufacturing environments. In particular, it is shown that, to achieve a high due-time performance in a lean environment, the production system should be scheduled for a sufficiently small fraction of its average production rate. In mass production, due-time performance arbitrarily close to one can be achieved for any scheduling practice, up to the average production rate.

Higher Atmosphere Heating due to black carbon Over the Northern Part of India

Science.gov (United States)

Tiwari, S.; Singh, S., , Dr

2017-12-01

Light-absorbing, atmospheric particles have gained greater attention in recent years because of their direct and indirect impacts on regional and global climate. Atmospheric black carbon (BC) aerosol (also called soot particle) is a leading climate warming agent, yet uncertainties in the global direct aerosol radiative forcing remain large. Based on a year of aerosol absorption measurements at seven wavelengths, BC concentrations were investigated in Dhanbad, the coal capital of India. Coal is routinely burned for cooking and residential heat as well as in small industries. The mean daily concentrations of ultraviolet-absorbing black carbon measured at 370 nm (UVBC) and black carbon measured at 880 nm (BC) were 9.8 ± 5.7 and 6.5 ± 3.8 μg m-3, respectively. The difference between UVBC and BC, Delta-C, is an indicator of biomass or residential coal burning and averaged 3.29 ± 4.61 μg m-3. An alternative approach uses the calculation of the Angstrom Exponent (AE) to estimate the amounts of biomass/coal and traffic BC. Biomass/coal burning contributed 87% and fossil fuel combustion contributed 13% to the annual average BC concentration. In the post-monsoon season, potential source contribution function analysis showed that air masses came from the central and northwestern Indo-Gangetic Plains resulting in mean UVBC values of 10.9 μg m-3 and BC of 7.2 μg m-3. The mean winter UVBC and BC concentrations were 15.0 and 10.1 μg m-3, respectively. These highest values were largely driven by local sources under conditions of poor dispersion. The direct radiative forcing (DRF) due to UVBC and BC at the surface (SFC) and the top of the atmosphere (TOA) were calculated. The mean atmospheric heating rates due to UVBC and BC were estimated to be 1.40°K day-1 and 1.18°K day-1, respectively. This high heating rate may affect the monsoon circulation in this region.

On the self-induced motion of a helical vortex

NARCIS (Netherlands)

Boersma, J.; Wood, D.H.

1999-01-01

The velocity field in the immediate vicinity of a curved vortex comprises a circulation around the vortex, a component due to the vortex curvature, and a ‘remainder’ due to the more distant parts of the vortex. The first two components are relatively well understood but the remainder is known only

Assessment of natural radioactivity levels due to 226Ra, 232Th and 40K in the soil samples from eastern part of Gulbarga, Karnataka

International Nuclear Information System (INIS)

Rajesh, S.; Avinash, P.R.; Kerur, B.R.; Anilkumar, S.

2014-01-01

The natural radiation dose received by the public mainly arises from the cosmic radiation (galactic and solar) and from terrestrial sources. Terrestrial radiation levels in the environment are due to radiations from natural radioactive elements preset in various environmental materials. Naturally occurring radionuclides are the major contributors to the total effective dose of ionizing radiation received by the population. The gamma rays from natural radionuclides like 226 Ra, 232T h and 40 K are the most significant for environmental dose, due to its wide range and penetrating power. The occurrence and concentration of these radionuclides depend mainly on the local geological formation and geochemical composition of earth. Two adjoining talukas, Sedam and Chincholi selected for the present study lies in the eastern part of Gulbarga district of North-East Karnataka covers the area with range 17.12° - 17.51° N latitude and 77.08° - 77.85° E longitude as shown in the paper. The soil types in the study region are mainly black soil. The area is surrounded by the plane surface and small hills in certain directions which have an abundant resource of the shale and limestone, which are highly deformed in nature. The study area is popular for industries like cement production and granite mining, utilizing natural resources in large scale. It will be of interest to examine the variation of environmental radiation dose rates due to various activities in the study area. Large number surface soil samples have been collected from the study region for the assessment of effective dose from 226 Ra, 232 Th and 40 K. The data generated in this study region will act as a baseline data for natural background radiation and is essential for future assessments, comparison and radiological mapping of the study area

Dignity and the use of body parts.

Science.gov (United States)

Foster, Charles

2014-01-01

This paper contends that the conventional ethical and legal ways of analysing the wrong involved in the misuse of human body parts are inadequate, and should be replaced with an analysis based on human dignity. It examines the various ways in which dignity has been understood, outlines many of the criticisms made of those ways (agreeing with many of the criticisms), and proposes a new way of seeing dignity which is exegetically consonant with the way in which dignity has been historically understood, and yet avoids the pitfalls which have led to dignity being dismissed by many as hopelessly amorphous or incurably theological. The account of dignity proposed is broadly Aristotelian. It defines dignity in terms of human thriving, and presupposes that it is possible, at least in principle, to determine empirically what makes humans thrive. It contends that humans are quintessentially relational animals, and that it is not possible (and certainly not ethically desirable) to define humans as atomistic entities. One important corollary of this is that when using dignity/thriving as a criterion for determining the ethical acceptability of a proposed action or inaction, one should ask not merely how the dignity interests of the patient (for instance) would be affected, but how the dignity interests of all stakeholders would be affected. The business of ethics is then the business of auditing all those interests, and determining the course of action which would maximise the amount of thriving in the world.

Life time evaluation of spectrum loaded machine parts

Energy Technology Data Exchange (ETDEWEB)

Rabb, R. [Waertsilae NSD Corporation, Vaasa (Finland)

1998-12-31

In a medium speed diesel engine there are some important components, such as the cylinder head, the piston and the cylinder liner, which are subjected to a specific load spectrum consisting of mainly two distinct parts. One is the low cycle part which is due to the temperature field that builds up after that the engine has been started. This low cycle part causes a big stress amplitude but consists of only a couple of thousand cycles during the engine life time. The other part of the load spectrum is the high cycle part due to the firing pressure. The high cycle part has a smaller amplitude but consists of billions of cycles during the engine life time. The cylinder head and the cylinder liner are made of cast iron. In this investigation the true extension into the high cycle domain of the S-N curve for grey cast iron grade 300/ISO 185 was established through fatigue tests with a load spectrum resembling the existing one. This testing resulted in much new and improved knowledge about the fatigue properties of grey cast iron and it was even possible to generalize the outcome of the spectrum fatigue tests into a simple design curve. (orig.) 11 refs.

Finančné due diligence: teória a prax pri M&A transakciách

OpenAIRE

Vavrovič, Maroš

2015-01-01

This thesis focuses on financial due diligence within M&A transactions. In the first part, due diligence is characterized as one of the main factors of M&A failure. Due diligence process and definition is described afterwards, as well as purpose of due diligence, various types of due diligence and position of due diligence within individual phases of M&A transaction. Furthermore, financial due diligence and its main principles are defined. Essential differences between financial due diligence...

The Center of Gravity, Systemically Understood

Science.gov (United States)

2013-05-23

manner that gave him the time to pursue and destroy the retreating army. Centuries later, another great captain – Napoléon Bonaparte – employed...Jena-Auerstadt 1806 In 1806, Napoléon Bonaparte became the first operational artist in the history of modern war when he defeated the Prussian... Napoleon , Operational Art, and the Jena Campaign,” in Historical Perspectives of the Operational Art, ed. Michael D. Krause and R. Cody Phillips

Increased Cortical Inhibition in Autism-Linked Neuroligin-3R451C Mice Is Due in Part to Loss of Endocannabinoid Signaling.

Science.gov (United States)

Speed, Haley E; Masiulis, Irene; Gibson, Jay R; Powell, Craig M

2015-01-01

A single, maternally inherited, X-linked point mutation leading to an arginine to cysteine substitution at amino acid 451 (R451C) of Neuroligin 3 (NLGN3R451C) is a likely cause of autism in two brothers. Knockin mice expressing the Nlgn3R451C mutation in place of wild-type Nlgn3 demonstrate increased inhibitory synaptic strength in somatosensory cortex, resulting in an excitatory/inhibitory (E/I) imbalance that is potentially relevant for autism-associated behavioral deficits characteristic of these mice. We have replicated the increase in evoked inhibitory postsynaptic currents (eIPSCs) onto layer II/III cortical pyramidal neurons. We also find that increased frequency of spontaneous mIPSCs in Nlgn3R451C mice occurs in the absence of action potential-driven transmission. This suggests the E/I imbalance is due to changes at the synapse level, as opposed to the network level. Next, we use paired whole-cell recordings in an attempt to identify specific interneuron subtypes affected by the Nlgn3R451C mutation. Curiously, we observe no change in the amplitude of cell-to-cell, unitary IPSCs (uIPSCs) from parvalbumin-positive (PV) or somatostatin-positive (SOM) interneurons onto pyramidal neurons. We also observe no change in the number or density of PV and SOM interneurons in LII/III of somatosensory cortex. This effectively rules out a role for these particular interneurons in the increased inhibitory synaptic transmission, pointing to perhaps alternative interneuron subtypes. Lastly, impaired endocannabinoid signaling has been implicated in hippocampal synaptic dysfunction in Nlgn3R451C mice, but has not been investigated at cortical synapses. We find that bath application of the CB1 antagonist, AM 251 in WT mice eliminates the Nlgn3R451C increase in eIPSC amplitude and mIPSC frequency, indicating that increased inhibitory transmission in mutant mice is due, at least in part, to a loss of endocannabinoid signaling through CB1 receptors likely acting at interneurons

Increased Cortical Inhibition in Autism-Linked Neuroligin-3R451C Mice Is Due in Part to Loss of Endocannabinoid Signaling.

Directory of Open Access Journals (Sweden)

Haley E Speed

Full Text Available A single, maternally inherited, X-linked point mutation leading to an arginine to cysteine substitution at amino acid 451 (R451C of Neuroligin 3 (NLGN3R451C is a likely cause of autism in two brothers. Knockin mice expressing the Nlgn3R451C mutation in place of wild-type Nlgn3 demonstrate increased inhibitory synaptic strength in somatosensory cortex, resulting in an excitatory/inhibitory (E/I imbalance that is potentially relevant for autism-associated behavioral deficits characteristic of these mice. We have replicated the increase in evoked inhibitory postsynaptic currents (eIPSCs onto layer II/III cortical pyramidal neurons. We also find that increased frequency of spontaneous mIPSCs in Nlgn3R451C mice occurs in the absence of action potential-driven transmission. This suggests the E/I imbalance is due to changes at the synapse level, as opposed to the network level. Next, we use paired whole-cell recordings in an attempt to identify specific interneuron subtypes affected by the Nlgn3R451C mutation. Curiously, we observe no change in the amplitude of cell-to-cell, unitary IPSCs (uIPSCs from parvalbumin-positive (PV or somatostatin-positive (SOM interneurons onto pyramidal neurons. We also observe no change in the number or density of PV and SOM interneurons in LII/III of somatosensory cortex. This effectively rules out a role for these particular interneurons in the increased inhibitory synaptic transmission, pointing to perhaps alternative interneuron subtypes. Lastly, impaired endocannabinoid signaling has been implicated in hippocampal synaptic dysfunction in Nlgn3R451C mice, but has not been investigated at cortical synapses. We find that bath application of the CB1 antagonist, AM 251 in WT mice eliminates the Nlgn3R451C increase in eIPSC amplitude and mIPSC frequency, indicating that increased inhibitory transmission in mutant mice is due, at least in part, to a loss of endocannabinoid signaling through CB1 receptors likely acting at

25 CFR 42.1 - What general principles apply to this part?

Science.gov (United States)

2010-04-01

... regulations in this part govern student rights and due process procedures in disciplinary proceedings in all... systems where appropriate. (b) All student rights, due process procedures, and educational practices...

Optimal defense: snails avoid reproductive parts of the lichen Lobaria scrobiculata due to internal defense allocation.

Science.gov (United States)

Asplund, Johan; Solhaug, Knut Asbjørn; Gauslaa, Yngvar

2010-10-01

The optimal defense theory (ODT) deals with defensive compounds improving fitness of a particular organism. It predicts that these compounds are allocated in proportion to the risk for a specific plant tissue being attacked and this tissue's value for plant fitness. As the benefit of defense cannot easily be measured in plants, the empirical evidence for ODT is limited. However, lichens are unique in the sense that their carbon-based secondary compounds can nondestructively be removed or reduced in concentration by acetone rinsing. By using such an extraction protocol, which is lethal to plants, we have tested the ODT by studying lichens instead of plants as photosynthetically active organisms. Prior to acetone rinsing, we found five times higher concentration of meta-scrobiculin in the reproductive parts (soralia) of Lobaria scrobiculata compared to somatic parts of this foliose epiphytic lichen species. At this stage, the lichen-feeding snail Cochlodina laminata avoided the soralia. However, after removal of secondary compounds, the snail instead preferred the soralia. In this way, we have successfully shown that grazing pattern inversely reflects the partitioning of the secondary compounds that have a documented deterring effect. Thus our study provides strong and novel evidence for the ODT.

Impacts of transportation sector emissions on future U.S. air quality in a changing climate. Part I: Projected emissions, simulation design, and model evaluation.

Science.gov (United States)

Campbell, Patrick; Zhang, Yang; Yan, Fang; Lu, Zifeng; Streets, David

2018-07-01

Emissions from the transportation sector are rapidly changing worldwide; however, the interplay of such emission changes in the face of climate change are not as well understood. This two-part study examines the impact of projected emissions from the U.S. transportation sector (Part I) on ambient air quality in the face of climate change (Part II). In Part I of this study, we describe the methodology and results of a novel Technology Driver Model (see graphical abstract) that includes 1) transportation emission projections (including on-road vehicles, non-road engines, aircraft, rail, and ship) derived from a dynamic technology model that accounts for various technology and policy options under an IPCC emission scenario, and 2) the configuration/evaluation of a dynamically downscaled Weather Research and Forecasting/Community Multiscale Air Quality modeling system. By 2046-2050, the annual domain-average transportation emissions of carbon monoxide (CO), nitrogen oxides (NO x ), volatile organic compounds (VOCs), ammonia (NH 3 ), and sulfur dioxide (SO 2 ) are projected to decrease over the continental U.S. The decreases in gaseous emissions are mainly due to reduced emissions from on-road vehicles and non-road engines, which exhibit spatial and seasonal variations across the U.S. Although particulate matter (PM) emissions widely decrease, some areas in the U.S. experience relatively large increases due to increases in ship emissions. The on-road vehicle emissions dominate the emission changes for CO, NO x , VOC, and NH 3 , while emissions from both the on-road and non-road modes have strong contributions to PM and SO 2 emission changes. The evaluation of the baseline 2005 WRF simulation indicates that annual biases are close to or within the acceptable criteria for meteorological performance in the literature, and there is an overall good agreement in the 2005 CMAQ simulations of chemical variables against both surface and satellite observations. Copyright © 2018

Changing nature of equipment and parts qualification

International Nuclear Information System (INIS)

Bucci, R.M.

1988-01-01

Ideally, the original supplier of a piece of nuclear safety-related equipment has performed a qualification program and will continue to support that equipment throughout the lifetime of the nuclear power plants in which in equipment is installed. The supplier's nuclear quality assurance program will be maintained and he will continue to offer all necessary replacement parts. These parts will be identical to the original parts, certified to the original purchase order requirements, and the parts will be offered at competitive prices. Due to the changing nature of the nuclear plant equipment market, however, one or more of those ideal features are frequently unavailable when safety-related replacement equipment or parts are required. Thus, the process of equipment and parts qualification has had to adjust in order to ensure obtaining qualified replacements when needed. This paper presents some new directions taken in the qualification of replacement equipment and parts to meet changes in the marketplace

Small Bowel Perforation due to Gossypiboma Caused Acute Abdomen

Directory of Open Access Journals (Sweden)

Tahsin Colak

2013-01-01

Full Text Available Gossypiboma, an infrequent surgical complication, is a mass lesion due to a retained surgical sponge surrounded by foreign body reaction. In this case report, we describe gossypiboma in the abdominal cavity which was detected 14 months after the hysterectomy due to acute abdominal pain. Gossypiboma was diagnosed by computed tomography (CT. The CT findings were a rounded mass with a dense central part and an enhancing wall. In explorative laparotomy, small bowel loops were seen to be perforated due to inflammation of long standing gossypiboma. Jejunal resection with end-to-end anastomosis was performed. The patient was discharged whithout complication. This case was presented to point to retained foreign body (RFB complications and we believed that the possibility of a retained foreign body should be considered in the differential diagnosis of who had previous surgery and complained of pain, infection, or palpable mass.

Interstrand DNA crosslinks due to AP (apurinic/apyrimidinic) sites

International Nuclear Information System (INIS)

Goffin, C.; Verly, W.G.

1983-01-01

Storage of a solution of DNA containing apurinic sites, even at 4 0 C leads to the appearance of interstrand crosslinks. Possible consequences of these crosslinks, when they appear in cell DNA, are briefly discussed. Formation of interstrand crosslinks in DNA containing tritium-labelled thymine and kept in an aqueous solution might be due, at least partly, to the loss of bases by the autoirradiated DNA. (Auth.)

The physics of magnetic resonance imaging: how well understood is it?

International Nuclear Information System (INIS)

Reynolds, S.E.

2000-01-01

Full text: Part of my work involves tutoring trainee radiologists on the physics of magnetic resonance imaging (MRI). I have observed that a full understanding of the physics involved with MRI, or nuclear magnetic resonance (NMR) to be more specific, seems to be beyond the hopes of many people working in the field. All diagnostic radiology textbooks that I have read touch very superficially on the physics of NMR and sometimes the explanations and models used are quite inaccurate and misleading. After further investigation, I found some very good coverage on the subject in chemistry texts. The physics of NMR is based on some very difficult quantum mechanical concepts. What I have managed to understand has been tremendously satisfying and has shed light on several conceptual difficulties which I initially struggled with. The physics of MRI is based on the motion of the hydrogen proton when subjected to an external magnetic field. Protons, which are positively charged particles, have an intrinsic spin and as a result, a magnetic field. A proton, when placed in an external magnetic field, undergoes several changes in its motion. The laws of quantum mechanics govern these changes. Diagnostic radiology textbook models describing the motion of a proton tend to be poor and inaccurate leading to confusion. For example, subatomic particles are subject to laws of quantum mechanics and are forbidden to align exactly with an applied magnetic field thus creating precession. Some textbooks make no attempt to explain this phenomenon whereas others attempt a superficial but inadequate quantum mechanical explanation. I am interested to canvas opinions from others involved in MRI as to difficulties they have encountered with the understanding of the physics of MRI and how they have been overcome. Copyright (2000) Australasian College of Physical Scientists and Engineers in Medicine

The misuse of Kant in the debate about a market for human body parts.

Science.gov (United States)

Gerrand, N

1999-01-01

Passages from the writings of Immanuel Kant concerning how a person should treat her body are often cited in the present-day debate about a market for human body parts. In this paper, I demonstrate that this has been a misuse of Kant because unlike those who cite him, Kant was not primarily concerned with prohibiting the sale of body parts. In the first section, I argue that once these particular passages are understood against the background of Kant's moral philosophy, they indicate he had much broader concerns relating to the correct moral relationship a rational person should have with her body. In the second section, I examine Stephen Munzer's unusually detailed analysis of these passages, but conclude that like those who have provided less detailed analyses, he also fails fully to understand the rationale for Kant's various prescriptions and prohibitions concerning the treatment of human body parts, and in doing so misrepresents Kant's position.

DYSTOCIA DUE TO SOFT TISSUE

Science.gov (United States)

DeCarle, Donald W.

1954-01-01

In dystocia caused by abnormal conditions of the soft parts, the etiologic changes may be either in the genital tissues or in adjacent soft structures. Broadly, the conditions causing the difficulty may be grouped as follows: (1) anomalies or congenital modifications; (2) tumors; (3) modifications due to age, accident or surgical operations; (4) modification of the expulsive forces; (5) abnormalities of the products of conception. Often in such circumstances cesarean section is necessary. Sometimes when tumor is present it can be removed before it interferes with delivery, but decision to excise the growth must be guided by such factors as the location of the lesion and the stage of gestation. This would determine to what extent the maintenance of pregnancy would be jeopardized by surgical intervention before term. PMID:13190430

Opportunities and applications of dendrochronology in Africa

NARCIS (Netherlands)

Gebrekirstos, A.; Bräuning, A.; Sass-Klaassen, U.; Mbow, C.

2014-01-01

Partly due to severe lack of instrumental climate data, the drivers of the African climate, their interactions and impacts are poorly understood. The paper demonstrates the prospects and applications of dendroecological and stable isotope techniques, such as to reconstruct climate variability,

Hydroforming of flanged tubular part

International Nuclear Information System (INIS)

Joo, B. D.; Jang, J. H.; Choi, M. K.; Moon, Y. H.

2010-01-01

Tube hydroforming is the technology that utilizes hydraulic pressure to form a tube into desired shapes inside die cavities. Recently, tube hydroforming technology draws attentions of automotive industries due to its advantages such as weight reduction, increased strength, improved quality and reduced tooling cost. Hydroformed automotive parts used as structural components in vehicle body frame or subframe often have to be structurally joined at some point. Therefore it is useful if the hydroformed automotive parts can be given a localized attachment flange. In this study, a tube hydroformed product which has flange has been formed at various processing conditions. To accomplish successful flange hydroforming process, thorough investigation on proper combination of process parameters such as internal hydraulic pressure and tool geometry has been performed. For the process design FE analysis was performed with Dynaform 5.5. With optimized die parting angle and circumferential expansion ratio, hydroforming experiments to form flange were performed and forming characteristics at various process conditions were analyzed. The results show that flanged parts can be successfully produced by tube hydroforming process.

Impairment of Heat Transfer in the Passive Cooling System due to Mixed Convection

Energy Technology Data Exchange (ETDEWEB)

Chae Myeong Seon; Chung, Bum Jin [Kyunghee University, Yongin (Korea, Republic of); Kim, Jong Hwan [KAERI, Daejeon (Korea, Republic of)

2016-05-15

In the passive cooling devices, the buoyant flows are induced. However the local Nusselt number of natural convective flow can be partly impaired due to the development of the mixed convective flows. This paper discusses impairment of heat transfer in the passive cooling system in relation to the development of mixed convection. The present work describes the preliminary plan to explore the phenomena experimentally. This paper is to discuss and make the plan to experiment the impairment of heat transfer in the passive cooling system due to mixed convection. In the sufficiently high passive cooling devices, the natural convection flow behavior can be mixed convection. The local Nusselt number distribution exhibits the non-monotonic behavior as axial position, since the buoyancy-aided with mixed convection was appeared. This is the part of the experimental work.

Action speaks louder than words: Empathy mainly modulates emotions from theory of mind-laden parts of a story

DEFF Research Database (Denmark)

Wallentin, Mikkel; Simonsen, Arndis; Nielsen, Andreas Højlund

2013-01-01

Narratives are thought to evoke emotions through empathy, which is thought to rely on theory of mind (a.k.a. “mentalizing”). In this study we investigated the extent to which these assumptions hold. Young adults rated their experienced emotional intensity while listening to a narrative...... and subsequently took an empathy test. We show how empathy correlates well with overall level of experienced intensity. However, no correlation with empathy is found in those parts of the story that received highest intensity ratings across participants. Reverse correlation analysis reveals that these parts...... contain physical threat scenarios, while parts where empathy score is highly correlated with intensity describe social interaction that can only be understood through mentalizing. This suggests that narratives evoke emotions, both based on “simple” physical contagion (affective empathy) and on complex...

Deep brain stimulation in addiction due to psychoactive substance use.

Science.gov (United States)

Kuhn, Jens; Bührle, Christian P; Lenartz, Doris; Sturm, Volker

2013-01-01

Addiction is one of the most challenging health problems. It is associated with enormous individual distress and tremendous socioeconomic consequences. Unfortunately, its underlying mechanisms are not fully understood, and pharmacological, psychological, or social interventions often fail to achieve long-lasting remission. Next to genetic, social, and contextual factors, a substance-induced dysfunction of the brain's reward system is considered a decisive factor for the establishment and maintenance of addiction. Due to its successful application and approval for several neurological disorders, deep brain stimulation (DBS) is known as a powerful tool for modulating dysregulated networks and has also been considered for substance addiction. Initial promising case reports of DBS in alcohol and heroin addiction in humans have recently been published. Likewise, results from animal studies mimicking different kinds of substance addiction point in a similar direction. The objective of this review is to provide an overview of the published results on DBS in addiction, and to discuss whether these preliminary results justify further research, given the novelty of this treatment approach. © 2013 Elsevier B.V. All rights reserved.

Risk mitigation process for utilization of commercial off-the-shelf (COTS) parts in CCD camera for military applications

Science.gov (United States)

Ahmad, Anees; Batcheldor, Scott; Cannon, Steven C.; Roberts, Thomas E.

2002-09-01

This paper presents the lessons learned during the design and development of a high performance cooled CCD camera for military applications utilizing common commercial off the shelf (COTS) parts. Our experience showed that concurrent evaluation and testing of high risk COTS must be performed to assess their performance over the required temperature range and other special product requirements such as fuel vapor compatibility, EMI and shock susceptibility, etc. Technical, cost and schedule risks for COTS parts must also be carefully evaluated. The customer must be involved in the selection and evaluation of such parts so that the performance limitations of the selected parts are clearly understood. It is equally important to check with vendors on the availability and obsolescence of the COTS parts being considered since the electronic components are often replaced by newer, better and cheaper models in a couple of years. In summary, this paper addresses the major benefits and risks associated with using commercial and industrial parts in military products, and suggests a risk mitigation approach to ensure a smooth development phase, and predictable performance from the end product.

Does Religion Breed Trust? A Cross-National Study of the Effects of Religious Involvement, Religious Faith, and Religious Context on Social Trust

NARCIS (Netherlands)

Dingemans, Ellen; van Ingen, Erik

2015-01-01

Many previous studies have linked religiosity to social trust. Yet much of this relation remains insufficiently understood, which is partly due to the fact that religiosity is a multidimensional phenomenon. In this article, we identify several of those dimensions, including the integration in

Tobacco and Alcohol in Relation to Male Breast Cancer

DEFF Research Database (Denmark)

Cook, Michael B; Guénel, Pascal; Gapstur, Susan M

2015-01-01

BACKGROUND: The etiology of male breast cancer is poorly understood, partly due to its relative rarity. Although tobacco and alcohol exposures are known carcinogens, their association with male breast cancer risk remains ill-defined. METHODS: The Male Breast Cancer Pooling Project consortium prov...

Dermatophytosis due to Microsporum nanum infection in a canine

Directory of Open Access Journals (Sweden)

Marilia Avila Valandro

2017-03-01

Full Text Available Miscrosporum nanum is a dermatophyte found in swine that causes non-pruritic lesions with desquamation, alopecia, and circular characteristics. M. nanum infection in dogs is rare and poorly understood in terms of its epidemiological and clinical features, and its therapeutic response. The present report describes a case of dermatophytosis due to M. nanum in a Dogo Argentino breed of dog that was used for wild boar hunting. The dermatophytosis presented with hypotrichosis, erythema, and non-pruritic desquamation in the back of the neck and chest area. The dermatophytosis was responsive to systemic treatment with itraconazole and topical (miconazole 2% for 60 days. Thus, we conclude that the practice of hunting wild boar should be considered as a possible source of infection of M. nanum in the reported dog. The M. nanum infection showed clinical features that were similar to the lesions observed in swine, except for the absence of the circular pattern, and showed a good clinical response to the therapy. Finally, M. nanum should be considered as an etiologic agent of dermatophytosis in dogs that in some manner have had direct contact with domestic or wild swine.

Abnormal vibration of turbine due to oil whip

International Nuclear Information System (INIS)

Koo, Jae Raeyang; Hwang, Jae Hyeon

2001-01-01

Almost all rotating machinery has bearings. Bearing is one of the most important part of rotating machinery. Vibration of rotating machinery depend on its bearing conditions. Bearing conditions are following; oil gap, bearing type, bearing temperature, bearing oil condition. Especially, bearing oil condition influences on rotating machinery vibration directly. In this paper we have discussed the abnormal vibration of turbine due to oil condition. Oil whip problem was occurred in the certain power plant and we had solved this problem through the control of operating values and alignment

ROOT GROWTH AND TURNOVER IN DIFFERENT AGED PONDEROSA PINE STANDS IN OREGON, USA

Science.gov (United States)

The impacts of pollution and climate change on soil carbon dynamics are poorly understood, in part due to a lack of information regarding root production and turnover in natural ecosystems. In order to examine how root dynamics change with stand age in ponderosa pine forests (...

N1-Substituted 2,3-Quinoxalinediones as Kainate Receptor Antagonists: X-ray Crystallography, Structure-Affinity Relationships and in vitro Pharmacology

DEFF Research Database (Denmark)

Pallesen, Jakob Staun; Møllerud, Stine; Frydenvang, Karla Andrea

2018-01-01

Among the ionotropic glutamate receptors, the physiological role of kainate receptors is less well understood than AMPA and NMDA receptors, partly due to a lack of selective pharmacological tool compounds. Although ligands with selectivity towards the kainate receptor subtype GluK1 are available,...

Long-Term Type 1 Diabetes Enhances In-Stent Restenosis after Aortic Stenting in Diabetes-Prone BB Rats

NARCIS (Netherlands)

Onuta, Geanina; Groenewegen, Hendrik C.; Klatter, Flip A.; Boer, Mark Walther; Goris, Maaike; van Goor, Harry; Roks, Anton J. M.; Rozing, Jan; de Smet, Bart J. G. L.; Hillebrands, Jan-Luuk

2011-01-01

Type 1 diabetic patients have increased risk of developing in-stent restenosis following endovascular stenting. Underlying pathogenetic mechanisms are not fully understood partly due to the lack of a relevant animal model to study the effect(s) of long-term autoimmune diabetes on development of

Long-term type 1 diabetes enhances in-stent restenosis after aortic stenting in diabetes-prone BB rats

NARCIS (Netherlands)

J.-L. Hillebrands (Jan-Luuk); G. Onuta (Geanina); H.C. Groenewegen (Hendrik); F.A. Klatter (Flip); M. Walther Boer (Mark); M. Goris (Maaike); H. van Goor (Harry); A.J.M. Roks (Anton); J. Rozing (Jan); B.J.G.L. de Smet (Bart)

2011-01-01

textabstractType 1 diabetic patients have increased risk of developing in-stent restenosis following endovascular stenting. Underlying pathogenetic mechanisms are not fully understood partly due to the lack of a relevant animal model to study the effect(s) of long-term autoimmune diabetes on

Chemometrics in spectroscopy. Part 1. Classical chemometrics

International Nuclear Information System (INIS)

Geladi, Paul

2003-01-01

An overview is given of chemometrics as it can be applied to spectroscopic and other multivariate data. Major chemometrics and data analysis techniques are described. An important aspect is the focus on soft modeling for situations that are too complicated for the traditional hard models to work. Also measurement noise is given due attention. A small example is used to illustrate some ways of working, mainly by using graphics. Selected literature references are given. Part 1 deals with classical chemometrics. Part 2 presents some newer developments and includes some more elaborated examples

Neoliberal policies and urban reconfigurations. Victoria, San Fernando, province of Buenos Aires, a city understood from theory

Directory of Open Access Journals (Sweden)

Laura Ester Donadío

2016-07-01

Full Text Available This article aims to explain from a theoretical conceptual approach the particularities that exist in Victoria, San Fernando, Buenos Aires, from its urban production. Through a series of field works, semi-structured interviews and observations, it was possible to perceive that in this locality, there are three logics of city production, market, state and necessity, according to Abramo, P. (2002. The post-development cities of Latin America, a space in which constant tensions are generated that alter the harmonious development of daily life and the interaction of those who inhabit the area. On the other hand, it is also perceived that the inhabitants naturalize that way of life, their spatial disposition, the progressive privatization of public areas and the proliferation of closed housing estates. Here is a quote that we have heard repeatedly in interviews with the neighbors: "No one in Victoria gives a ball to anyone." At the moment of understanding Victoria from the theory, we take into account such concepts as the "heterotopy" of Foucault M. (1967 - understood as the juxtaposition of spaces that would be incompatible -the term "com-fusa city" (Abramo P. - as an urban structure that interweaves two traditional models (the Mediterranean compact and the Anglo-Saxon diffused, the notion of "privatopia" by I.Rodriguez Chumillas (2005 and E. Mckenzie (1994 as private spatial consolidation, and finally the concepts: informative and dual cities of R Castells (1995 terms that emerge from the process of globalization, which may be useful to think about the reality of Victoria .

Small vessel disease, neurovascular regulation and cognitive impairment: post-mortem studies reveal a complex relationship, still poorly understood.

Science.gov (United States)

Love, Seth; Miners, J Scott

2017-07-15

The contribution of vascular disease to cognitive impairment is under-recognized and the pathogenesis is poorly understood. This information gap has multiple causes, including a lack of post-mortem validation of clinical diagnoses of vascular cognitive impairment (VCI) or vascular dementia (VaD), the exclusion of cases with concomitant neurodegenerative disease when diagnosing VCI/VaD, and a lack of standardization of neuropathological assessment protocols for vascular disease. Other contributors include a focus on end-stage destructive lesions to the exclusion of more subtle types of diffuse brain injury, on structural abnormalities of arteries and arterioles to the exclusion of non-structural abnormalities and capillary damage, and the use of post-mortem sampling strategies that are biased towards the identification of neurodegenerative pathologies. Recent studies have demonstrated the value of detailed neuropathology in characterizing vascular contributions to cognitive impairment (e.g. in diabetes), and highlight the importance of diffuse white matter changes, capillary damage and vasoregulatory abnormalities in VCI/VaD. The use of standardized, evidence-based post-mortem assessment protocols and the inclusion of biochemical as well as morphological methods in neuropathological studies should improve the accuracy of determination of the contribution of vascular disease to cognitive impairment and clarify the relative contribution of different pathogenic processes to the tissue damage. © 2017 The Author(s). published by Portland Press Limited on behalf of the Biochemical Society.

Heat Loads Due To Small Penetrations In Multilayer Insulation Blankets

Science.gov (United States)

Johnson, W. L.; Heckle, K. W.; E Fesmire, J.

2017-12-01

The main penetrations (supports and piping) through multilayer insulation systems for cryogenic tanks have been previously addressed by heat flow measurements. Smaller penetrations due to fasteners and attachments are now experimentally investigated. The use of small pins or plastic garment tag fasteners to ease the handling and construction of multilayer insulation (MLI) blankets goes back many years. While it has long been understood that penetrations and other discontinuities degrade the performance of the MLI blanket, quantification of this degradation has generally been lumped into gross performance multipliers (often called degradation factors or scale factors). Small penetrations contribute both solid conduction and radiation heat transfer paths through the blanket. The conduction is down the stem of the structural element itself while the radiation is through the hole formed during installation of the pin or fastener. Analytical models were developed in conjunction with MLI perforation theory and Fourier’s Law. Results of the analytical models are compared to experimental testing performed on a 10 layer MLI blanket with approximately 50 small plastic pins penetrating the test specimen. The pins were installed at ∼76-mm spacing inches in both directions to minimize the compounding of thermal effects due to localized compression or lateral heat transfer. The testing was performed using a liquid nitrogen boil-off calorimeter (Cryostat-100) with the standard boundary temperatures of 293 K and 78 K. Results show that the added radiation through the holes is much more significant than the conduction down the fastener. The results are shown to be in agreement with radiation theory for perforated films.

12 CFR Appendix C to Part 360 - Deposit File Structure

Science.gov (United States)

2010-01-01

.... • STATE = State government. • COMM = Commercial. • CORP = Corporate. • BANK = Bank Owned. • DUE TO = Other... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Deposit File Structure C Appendix C to Part 360... RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. C Appendix C to Part 360—Deposit File Structure This is the...

Greener plants, grayer skies? A report from the front lines of China's energy sector

International Nuclear Information System (INIS)

Steinfeld, Edward S.; Lester, Richard K.; Cunningham, Edward A.

2009-01-01

This article presents findings from the MIT China Energy Group's first-of-its-kind, independent nationwide survey of Chinese coal-fired power plants. It is well understood that developments in China's energy sector now have global environmental implications. It is also well understood that this sector has in recent years experienced rapidly rising fuel costs. The MIT survey, by delving into technology choice, pricing, fuel sourcing, and environmental cleanup at the firm level, provides insights into how the Chinese power sector as a whole responds, and what the environmental implications are. The findings suggest rapid uptake of advanced combustion technologies across the system, largely in response to rising fuel costs. Environmental cleanup systems, particularly for sulfur dioxide, have also spread rapidly, in large part due to regulatory enforcement. Yet, operationally, plants pollute substantially. Price hikes encourage them to source low-grade fuel and idle cleanup systems. On the whole, the Chinese system infrastructurally has a proven capacity for rapid technological upgrading in the face of new market and regulatory pressures. Operationally, however, in part due to exposure to market forces, and in part due to limited state capacity for monitoring operations, even the most advanced power plants remain major polluters.

Due diligence

International Nuclear Information System (INIS)

Sanghera, G.S.

1999-01-01

The Occupational Health and Safety (OHS) Act requires that every employer shall ensure the health and safety of workers in the workplace. Issues regarding the practices at workplaces and how they should reflect the standards of due diligence were discussed. Due diligence was described as being the need for employers to identify hazards in the workplace and to take active steps to prevent workers from potentially dangerous incidents. The paper discussed various aspects of due diligence including policy, training, procedures, measurement and enforcement. The consequences of contravening the OHS Act were also described

Monitoring single-cell gene regulation under dynamically controllable conditions with integrated microfluidics and software

NARCIS (Netherlands)

Kaiser, Matthias; Jug, Florian; Julou, Thomas; Deshpande, S.R.; Pfohl, Thomas; Silander, Olin K.; Myers, Gene; Van Nimwegen, Erik

2018-01-01

Much is still not understood about how gene regulatory interactions control cell fate decisions in single cells, in part due to the difficulty of directly observing gene regulatory processes in vivo. We introduce here a novel integrated setup consisting of a microfluidic chip and accompanying

Two sides of the coin. Part 1. Lipid and surfactant self-assembly revisited.

Science.gov (United States)

Ninham, Barry W; Larsson, Kåre; Lo Nostro, Pierandrea

2017-04-01

Hofmeister, specific ion effects, hydration and van der Waals forces at and between interfaces are factors that determine curvature and microstructure in self assembled aggregates of surfactants and lipids; and in microemulsions. Lipid and surfactant head group interactions and between aggregates vary enormously and are highly specific. They act on the hydrophilic side of a bilayer, micelle or other self assembled aggregate. It is only over the last three decades that the origin of Hofmeister effects has become generally understood. Knowledge of their systematics now provides much flexibility in designing nanostructured fluids. The other side of the coin involves equally specific forces. These (opposing) forces work on the hydrophobic side of amphiphilic interfaces. They are due to the interaction of hydrocarbons and other "oils" with hydrophobic tails of surfactants and lipids. The specificity of oleophilic solutes in microemulsions and lipid membranes provides a counterpoint to Hofmeister effects and hydration. Together with global packing constraints these effects determine microstructure. Another factor that has hardly been recognised is the role of dissolved gas. This introduces further, qualitative changes in forces that prescribe microstructure. The systematics of these effects and their interplay are elucidated. Awareness of these competing factors facilitates formulation of self assembled nanostructured fluids. New and predictable geometries that emerge naturally provide insights into a variety of biological phenomena like anaesthetic and pheromone action and transmission of the nervous impulse (see Part 2). Copyright © 2017 Elsevier B.V. All rights reserved.

The quantum-classical divide understood in terms of Bohm's holographic paradigm

Energy Technology Data Exchange (ETDEWEB)

Matarese, Vera [The University of Hong Kong (China)

2014-07-01

This paper aims to interpret the problem of the quantum-classical divide following Bohm's holographic model and to reformulate it as an indication of a new physical order. First of all I briefly outline the differences between the classical world and the quantum one (such as locality against nonlocality, determinism against indeterminism and continuity against discontinuity); then I claim that in order to understand the divide between the two domains we should start from what is common, and regard them as two abstractions and limiting cases of a general theory. In particular, following Bohm, I show that the central notion of this new theory is an undivided whole characterized by a general order consisting of a holomovement from an implicate order - the quantum domain - to an explicate order - in the classical domain. This part is explained with the aid of the structure of the hologram and is supported by a reflection on some key terms such as 'order', 'structure', 'implicate' and 'explicate'. Finally I propose that this movement of unfoldment and enfoldment can explain the apparent incompatibility of the two physical domains and the passage from one to the other.

Pregnancy Complicated with Pulmonary Edema Due to Hyperthyroidism

Directory of Open Access Journals (Sweden)

Ming-Jie Yang

2005-07-01

Full Text Available Hyperthyroidism is one of the most common causes of cardiac failure. Blood volume expands greatly during pregnancy, especially after the last part of the second trimester. Such expansion exacerbates the symptoms of heart failure and accelerates the development of pulmonary edema when abnormal thyroid function is not well controlled. Two cases of pregnancy complicated with congestive heart failure and pulmonary edema due to hyperthyroidism are reported here. Both patients did not receive treatment for hyperthyroidism during pregnancy, and both sought clinical help during the third trimester. The clinical problems were resolved by medical management before delivery.

Nuclear medicine. 1 part. Manual

International Nuclear Information System (INIS)

Shlygina, O.E.; Borisenko, A.R.

2006-01-01

Current manual is urged to give wide-scale readers a submission on a key principles and methods of nuclear medicine, and it opportunities and restrictions in diagnostics and treatment of different diseases. Nuclear medicine is differing first of all by combination of diverse knowledge fields: special knowledge of a doctor, knowledge of physical processes bases, related with radiation, grounds of radiopharmaceutics, dosimetry. In the base of the book the 5th edition of 'Nuclear medicine' manual in 2 parts of German authors - Schicha, G.; Schober, O. is applied. In the book publishing the stuff of the Institute of Nuclear Physics of the National Nuclear Center of Republic of Kazakhstan has been worked. Modifications undergo practically all chapters: especially the second one, forth and sixth was enlarged. The 1 part of the book was published due to support of IAEA within the Technical cooperation project 'Implementation of Nuclear Medicine and Biophysics Center' (KAZ/6/007). The manual second part - devoted to applications of nuclear medicine methods for diagnostics and treatment - will be published in 2007

Yes Virginia, quantum mechanics can be understood

CERN Document Server

Wallace, John P

2017-01-01

Virginia, B. W. Wooster, and Jeeves take up physics with the hope of understanding quantum mechanics. In the process they take a rather grand tour on an old sailing ship and aid a sow in distress. On their journey they discover that physics is not as difficult a subject as they imagined. When they dismantled physics and reassembled it in a form where gravity, strong, electromagnetic and the weak forces all stem from understanding the gaming strategy known as the fair-game. That great cultural divide first expounded by the novelist C.P.Snow was found to be a mere ditch that can be stepped over. The sins of the past were violations of energy conservation and strange notions about what mass actually represents. Now mass is defined without the assistance of the Standard Model. Things will not be the same. Singularities have been banished. The electron now has a scale and is no longer captive in a point. The gluon is no longer essential along with the single virtual photon.

Evil Understood as the Absence of Freedom

DEFF Research Database (Denmark)

Rabjerg, Bjørn

2017-01-01

Self-development is closely related to the idea of formation (or what is referred to as Bildung in German). But when speaking of formation, we have to address the question, ‘what are we formed by?’ Is the human being formed by him- or herself, or by resources originating from outside the self? Fr...

Absence from work due to occupational and non-occupational accidents.

Science.gov (United States)

Jørgensen, Kirsten; Laursen, Bjarne

2013-02-01

The aim of the present study was to investigate absence from work in Denmark due to occupational and non-occupational accidents. Since the beginning of the last decade, political focus has been placed on the population's working capacity and the scope of absence due to illness. Absence from work is estimated at between 3% and 6% of working hours in the EU and costs are estimated at approximately 2.5% of GNP. Victims of accidents treated at two emergency departments were interviewed regarding absence for the injured, the family and others. All answers were linked to the hospital information on the injury, so that it was possible to examine the relation between absence and injury type, and cause of the accident. In total, 1,479 injured persons were interviewed. 36% of these reported absence from work by themselves or others. In mean, an injury caused 3.21 days of absence. Based on this the total absence due to injuries in Denmark was estimated to 1,822,000 workdays, corresponding to approximately 6% of the total absence from work due to all types of illness. Non-occupational injuries resulted in more absence than did occupational injuries. Absence due to accidents contributed to a considerable part of the total absence from work, and non-occupational accidents caused more absence than did occupational accidents.

FEL small signal gain reduction due to phase error of undulator

International Nuclear Information System (INIS)

Jia Qika

2002-01-01

The effects of undulator phase errors on the Free Electron Laser small signal gain is analyzed and discussed. The gain reduction factor due to the phase error is given analytically for low-gain regimes, it shows that degradation of the gain is similar to that of the spontaneous radiation, has a simple exponential relation with square of the rms phase error, and the linear variation part of phase error induces the position shift of maximum gain. The result also shows that the Madey's theorem still hold in the presence of phase error. The gain reduction factor due to the phase error for high-gain regimes also can be given in a simple way

An improved method for forecasting spare parts demand using extreme value theory

NARCIS (Netherlands)

Zhu, S.; Dekker, R.; van Jaarsveld, W.; Renjie, R.W.; Koning, A.J.

2017-01-01

Inventory control for spare parts is essential for many organizations due to the trade-off between preventing high holding cost and stockouts. The lead time demand distribution plays a central role in inventory control. The estimation of this distribution is problematic as the spare part demand is

Absorbed doses to the main parts of eyeball due to use 90Sr + 90Y ophthalmic applicator

International Nuclear Information System (INIS)

Chen Lishu

1993-05-01

The ophthalmic radiotherapy dosimetry and some affecting factors are introduced. The distributions of absorbed doses to the main parts of a fresh eyeball such as the cornea, sclera, lens and anterior chamber, during the radiotherapy by using a 90 Sr + 90 Y ophthalmic applicator are presented. An tissue-equivalent extrapolation ionization chamber was used in the dose measurement. The reasonable doses during ophthalmic radiotherapy for different depths have been obtained. Therefore, the absorbed dose to the lens, the most sensitive organ, can be given. These data are useful for radiation protection in ophthalmic radiotherapy

Ultra-violet radiation: hazard in workplaces? (part II)

International Nuclear Information System (INIS)

Mohd Yusof Mohd Ali

2003-01-01

Not many workers are aware that apart from chemicals, physical agents, noise and machines which are known to be hazardous in workplaces, there exist another source of hazard which is equally important to be recognised and respected, that is hazard due to ultrviolet radiation (UV). This is the continuation of part I, which was discussed in the later issue. In this part, hazard of ultraviolet radiation were briefly discused i.e. effects on the skin and the eyes. Other subjects discussed are exposure limits, how to assess the radiation, protection against ultraviolet radiation

Iron-Deficiency Anemia Leading to Transient Ischemic Attacks due to Intraluminal Carotid Artery Thrombus

Directory of Open Access Journals (Sweden)

H. Z. Batur Caglayan

2013-01-01

Full Text Available Reactive thrombocytosis secondary to iron-deficiency anemia (IDA is a rare but recognized cause of stroke. We report the case of a patient with iron-deficiency anemia presenting with multiple transient ischemic attacks (TIA due to intraluminal thrombus of an internal carotid artery. The putative mechanisms underlying anemia and stroke syndromes are not completely understood, and it is believed that iron deficiency may cause ischemic stroke by several potential mechanisms. Thrombocytosis is often associated with iron deficiency, and microcytosis produces a reduction in the red cell deformability and could produce a hypercoagulable state. The platelet count and function observed in iron-deficiency anemia could act synergistically to promote thrombus formation, especially in the setting of an underlying atherosclerotic disease. The presence of floating thrombus in a patient with clinical and MRI evidence of stroke represents a significant therapeutic dilemma and requires immediate decision about treatment.

A study of how precursor key concepts for organic chemistry success are understood by general chemistry students

Science.gov (United States)

Meyer, Patrick Gerard

This study examines college student understanding of key concepts that will support future organic chemistry success as determined by university instructors. During four one-hour individual interviews the sixteen subjects attempted to solve general chemistry problems. A think-aloud protocol was used along with a whiteboard where the students could draw and illustrate their ideas. The protocols for the interviews were adapted from the Covalent Structure and Bonding two-tiered multiple choice diagnostic instrument (Peterson, Treagust, & Garnett, 1989) and augmented by the Geometry and Polarity of Molecules single-tiered multiple choice instrument (Furio & Calatayud, 1996). The interviews were videotaped, transcribed, and coded for analysis to determine the subjects' understanding of the key ideas. The subjects displayed many misconceptions that were summarized into nine assertions about student conceptualization of chemistry. (1) Many students misunderstand the location and nature of intermolecular forces. (2) Some think electronegativity differences among atoms in a molecule are sufficient to make the molecule polar, regardless of spatial arrangement. (3) Most know that higher phase change temperatures imply stronger intermolecular attractions, but many do not understand the difference between covalent molecular and covalent network substances. (4) Many have difficulty deciding whether a molecule is polar or non-polar, often confusing bilateral symmetry with spatial symmetry in all three dimensions. (5) Many cannot reliably draw correct Lewis structures due to carelessness and overuse of flawed algorithms. (6) Many are confused by how electrons can both repel one other and facilitate bonding between atoms via orbitals---this seems oxymoronic to them. (7) Many cannot explain why the atoms of certain elements do not follow the octet rule and some believe the octet rule alone can determine the shape of a molecule. (8) Most do know that electronegativity and polarity

Cutting edge: Rapid recovery of NKT cells upon institution of highly active antiretroviral therapy for HIV-1 infection

NARCIS (Netherlands)

van der Vliet, Hans J. J.; van Vonderen, Marit G. A.; Molling, Johan W.; Bontkes, Hetty J.; Reijm, Martine; Reiss, Peter; van Agtmael, Michiel A.; Danner, Sven A.; van den Eertwegh, Alfons J. M.; von Blomberg, B. Mary E.; Scheper, Rik J.

2006-01-01

CD1d-restricted NKT cells play important regulatory roles in various immune responses and are rapidly and selectively depleted upon infection with HIV-1. The cause of this selective depletion is incompletely understood, although it is in part due to the high susceptibility of CD4+ NKT cells to

Monitoring coordinate measuring machines by calibrated parts

International Nuclear Information System (INIS)

Weckenmann, A; Lorz, J

2005-01-01

Coordinate measuring machines (CMM) are essential for quality assurance and production control in modern manufacturing. Due to the necessity of assuring traceability during the use of CMM, interim checks with calibrated objects carried out periodically. For this purpose usually special artefacts like standardized ball plates, hole plates, ball bars or step gages are measured. Measuring calibrated series parts would be more advantageous. Applying the substitution method of ISO 15530-3: 2000 such parts can be used. It is less cost intensive and less time consuming than measuring expensive special standardized objects in special programmed measurement routines. Moreover, the measurement results can directly compare with the calibration values; thus, direct information on systematic measurement deviations and uncertainty of the measured features are available. The paper describes a procedure for monitoring horizontal-arm CMMs with calibrated sheet metal series parts

Investigation on the Accuracy of CT Porosity Analysis of Additive Manufactured Metallic Parts

NARCIS (Netherlands)

Zanini, Filippo; Hermanek, Petr; Rathore, Jitendra; Wits, Wessel W; Carmignato, Simone

2015-01-01

Additive manufacturing (AM) is emerging as an important manufacturing sector, due to its almost unlimited design freedom, the capability to produce personalized parts and the efficient material use. A reliable knowledge about material porosity of manufactured parts is crucial for optimizing AM

75 FR 32343 - Debt Collection and Administrative Offset for Monies Due the Federal Government

Science.gov (United States)

2010-06-08

... administrative collection of nontax debt with Treasury's Financial Management Service. This centralization allows... DEPARTMENT OF THE INTERIOR Minerals Management Service 30 CFR Part 218 [Docket No. MMS-2009-MRM-0005] RIN 1010-AD36 Debt Collection and Administrative Offset for Monies Due the Federal Government...

31 CFR 103.176 - Due diligence programs for correspondent accounts for foreign financial institutions.

Science.gov (United States)

2010-07-01

... TRANSACTIONS Anti-Money Laundering Programs Special Due Diligence for Correspondent Accounts and Private... an ongoing basis, any known or suspected money laundering activity conducted through or involving any... section shall be a part of the anti-money laundering program otherwise required by this subpart. Such...

Project W-320, 241-C-106 waste retrieval spare parts list

International Nuclear Information System (INIS)

Hays, W.H.

1998-01-01

Spare parts for equipment installed in the tank dome space or pump or valve pits should not be inventoried onsite due to the extensive, time-consuming work package planning, personnel/equipment mobilization, and funding requirements that are prerequisites to any repair or replacement. These issues provide adequate time to procure parts from offsite sources. All parts listed in this inventory can either be stocked in the DynCorp Tri-Cities Services, Inc., 2101-M Warehouse, or are available from the vendor/manufacturer

Project W-320, 241-C-106 waste retrieval spare parts list

Energy Technology Data Exchange (ETDEWEB)

Hays, W.H.

1998-03-23

Spare parts for equipment installed in the tank dome space or pump or valve pits should not be inventoried onsite due to the extensive, time-consuming work package planning, personnel/equipment mobilization, and funding requirements that are prerequisites to any repair or replacement. These issues provide adequate time to procure parts from offsite sources. All parts listed in this inventory can either be stocked in the DynCorp Tri-Cities Services, Inc., 2101-M Warehouse, or are available from the vendor/manufacturer.

Enhanced ionic conductivity in composite materials due to interfacial space charge layers

International Nuclear Information System (INIS)

Dudney, N.J.

1985-01-01

The ionic conductivity of a number of salts (e.g., β-AgI, LiI, CuCl, HgI 2 , etc.) can be enhanced by one to three orders of magnitude with the addition of fine particles of an insoluble and nonconducting material such as Al 2 O 3 or SiO 2 . Typically the conductivity increases with addition of the inert particles and reaches a peak at 10-40 vol % of the particles. The mechanism responsible for the enhanced conductivity of the composite is not understood at this time. Some claim that this effect is due to an increased concentration of charge carriers in a diffuse space charge layer near the charged surface of the particle. The goal of the present study is to test this proposed mechanism by calculating the maximum space charge layer effect and then using this result to estimate the conductivity of a composite with a random distribution of Al 2 O 3 particles. Also, the conductivity of composite systems has been investigated assuming an ordered distribution of particles which are surrounded by a high conductivity layer

UK asbestos imports and mortality due to idiopathic pulmonary fibrosis.

Science.gov (United States)

Barber, C M; Wiggans, R E; Young, C; Fishwick, D

2016-03-01

Previous studies have demonstrated that the rising mortality due to mesothelioma and asbestosis can be predicted from historic asbestos usage. Mortality due to idiopathic pulmonary fibrosis (IPF) is also rising, without any apparent explanation. To compare mortality due to these conditions and examine the relationship between mortality and national asbestos imports. Mortality data for IPF and asbestosis in England and Wales were available from the Office for National Statistics. Data for mesothelioma deaths in England and Wales and historic UK asbestos import data were available from the Health & Safety Executive. The numbers of annual deaths due to each condition were plotted separately by gender, against UK asbestos imports 48 years earlier. Linear regression models were constructed. For mesothelioma and IPF, there was a significant linear relationship between the number of male and female deaths each year and historic UK asbestos imports. For asbestosis mortality, a similar relationship was found for male but not female deaths. The annual numbers of deaths due to asbestosis in both sexes were lower than for IPF and mesothelioma. The strength of the association between IPF mortality and historic asbestos imports was similar to that seen in an established asbestos-related disease, i.e. mesothelioma. This finding could in part be explained by diagnostic difficulties in separating asbestosis from IPF and highlights the need for a more accurate method of assessing lifetime occupational asbestos exposure. © Crown copyright 2015.

Dynamic stresses in a Francis model turbine at deep part load

Science.gov (United States)

Weber, Wilhelm; von Locquenghien, Florian; Conrad, Philipp; Koutnik, Jiri

2017-04-01

A comparison between numerically obtained dynamic stresses in a Francis model turbine at deep part load with experimental ones is presented. Due to the change in the electrical power mix to more content of new renewable energy sources, Francis turbines are forced to operate at deep part load in order to compensate stochastic nature of wind and solar power and to ensure grid stability. For the extension of the operating range towards deep part load improved understanding of the harsh flow conditions and their impact on material fatigue of hydraulic components is required in order to ensure long life time of the power unit. In this paper pressure loads on a model turbine runner from unsteady two-phase computational fluid dynamics simulation at deep part load are used for calculation of mechanical stresses by finite element analysis. Therewith, stress distribution over time is determined. Since only few runner rotations are simulated due to enormous numerical cost, more effort has to be spent to evaluation procedure in order to obtain objective results. By comparing the numerical results with measured strains accuracy of the whole simulation procedure is verified.

Gamma exposures due to radionuclides deposited in urban environments: Pt. 1

International Nuclear Information System (INIS)

Meckbach, R.; Jacob, P.; Paretzke, H.G.

1988-01-01

The modification of gamma exposure from deposited activity at locations inside and outside of buildings in urban environments compared with unshielded locations has been computed using the Monte Carlo method. The types of buildings considered were a house of prefabricated parts, a semi-detached house, a row of four large terrace houses and a multistorey house block. The computations were performed for source energies of 0.3 MeV, 0.662 MeV and 3.0 MeV. In this first part of the paper results for the kerma at various locations inside and outside the buildings due to a contamination with unit surface activity are presented separately for each of the various deposition areas such as walls, windows, roofs, light shafts, paved areas, lawns, and trees. (author)

[In-hospital mortality due to stroke].

Science.gov (United States)

Rodríguez Lucci, Federico; Pujol Lereis, Virginia; Ameriso, Sebastián; Povedano, Guillermo; Díaz, María F; Hlavnicka, Alejandro; Wainsztein, Néstor A; Ameriso, Sebastián F

2013-01-01

Overall mortality due to stroke has decreased in the last three decades probable due to a better control of vascular risk factors. In-hospital mortality of stroke patients has been estimated to be between 6 and 14% in most of the series reported. However, data from recent clinical trials suggest that these figures may be substantially lower. Data from FLENI Stroke Data Bank and institutional mortality records between 2000 and 2010 were reviewed. Ischemic stroke subtypes were classified according to TOAST criteria and hemorrhagic stroke subtypes were classified as intraparenchymal hematoma, aneurismatic subarachnoid hemorrhage, arterio-venous malformation, and other intraparenchymal hematomas. A total of 1514 patients were studied. Of these, 1079 (71%) were ischemic strokes,39% large vessels, 27% cardioembolic, 9% lacunar, 14% unknown etiology, and 11% others etiologies. There were 435 (29%) hemorrhagic strokes, 27% intraparenchymal hematomas, 30% aneurismatic subarachnoid hemorrhage, 25% arterio-venous malformation, and 18% other intraparenchymal hematomas. Moreover, 38 in-hospital deaths were recorded (17 ischemic strokes and 21 hemorrhagic strokes), accounting for 2.5% overall mortality (1.7% in ischemic strokes and 4.8% in hemorrhagic strokes). No deaths occurred associated with the use of intravenous fibrinolytics occurred. In our Centre in-hospital mortality in patients with stroke was low. Management of these patients in a Centre dedicated to neurological diseases along with a multidisciplinary approach from medical and non-medical staff trained in the care of cerebrovascular diseases could, at least in part, account for these results.

Applying simulation to optimize plastic molded optical parts

Science.gov (United States)

Jaworski, Matthew; Bakharev, Alexander; Costa, Franco; Friedl, Chris

2012-10-01

Optical injection molded parts are used in many different industries including electronics, consumer, medical and automotive due to their cost and performance advantages compared to alternative materials such as glass. The injection molding process, however, induces elastic (residual stress) and viscoelastic (flow orientation stress) deformation into the molded article which alters the material's refractive index to be anisotropic in different directions. Being able to predict and correct optical performance issues associated with birefringence early in the design phase is a huge competitive advantage. This paper reviews how to apply simulation analysis of the entire molding process to optimize manufacturability and part performance.

Environmental state of the Slovenian part of the Adriatic Sea

Directory of Open Access Journals (Sweden)

Valentina Brečko Grubar

2010-06-01

Full Text Available Slovenian part of the Adriatic Sea is its most northern part which occupies approximately 200 km2 and is a part of the wider Gulf of Trieste. Slovenian coast consists of 47 kilometers of mostly steep, abrasive marl and sandstone coast. Low accumulation coast is located only at the mouths of the watercourses and represents but a smaller portion, whereas the smallest part is occupied by the limestone abrasion coast. Mainland coastal region is mostly hillside and has a very diverse relief, while plains, in smaller numbers, are located only in the lower parts of the river valleys. Slovenian sea indents the mainland by two larger gulfs: the Gulf of Koper and of Piran and is predominately very shallow. The average depth is around 18 m and the largest depth is 38 m at the Madona cape near Piran. Sea bottom is mostly covered by the thick layer of sediments deposited after the abrasion of the steep cliff coast and by the accumulation of the river alluvium. Due to its shallowness the sea is exposed to high temperature fluctuations and due to the fresh water influx also to the changes of its salinity. The circulation of the sea water is mainly induced by the tide and wind activities, mostly the Bora (strong north-easterly wind which significantly influences the vertical circulation of the water. Water current is weak and unstable. There is a large influx of nutrients into the Slovenian sea, resulting from the soil erosion, surface water influx, watercourses and direct emissions of waste waters into the sea. The consequence of the mentioned sea characteristics is a great landscape sensitivity of the coastal sea ecosystem. During summer the sea warms intensely and when accompanied by the weak water circulation, we are often witnessing the lack of oxygen in the deeper layers of the water, intensive algae growth and sea blooming, which points to exceeded self-cleaning (assimilation capacities of the marine ecosystem. The major polluters are the coastal towns

Environmental state of the Slovenian part of the Adriatic Sea

Directory of Open Access Journals (Sweden)

Valentina Brečko Grubar

2010-01-01

Full Text Available Slovenian part of the Adriatic Sea is its most northern part which occupies approximately 200 km2 and is a part of the wider Gulf of Trieste. Slovenian coast consists of 47 kilometers of mostly steep, abrasive marl and sandstone coast. Low accumulation coast is located only at the mouths of the watercourses and represents but a smaller portion, whereas the smallest part is occupied by the limestone abrasion coast. Mainland coastal region is mostly hillside and has a very diverse relief, while plains, in smaller numbers, are located only in the lower parts of the river valleys. Slovenian sea indents the mainland by two larger gulfs: the Gulf of Koper and of Piran and is predominately very shallow. The average depth is around 18 m and the largest depth is 38 m at the Madona cape near Piran. Sea bottom is mostly covered by the thick layer of sediments deposited after the abrasion of the steep cliff coast and by the accumulation of the river alluvium. Due to its shallowness the sea is exposed to high temperature fluctuations and due to the fresh water influx also to the changes of its salinity. The circulation of the sea water is mainly induced by the tide and wind activities, mostly the Bora (strong north-easterly wind which significantly influences the vertical circulation of the water. Water current is weak and unstable. There is a large influx of nutrients into the Slovenian sea, resulting from the soil erosion, surface water influx, watercourses and direct emissions of waste waters into the sea. The consequence of the mentioned sea characteristics is a great landscape sensitivity of the coastal sea ecosystem. During summer the sea warms intensely and when accompanied by the weak water circulation, we are often witnessing the lack of oxygen in the deeper layers of the water, intensive algae growth and sea blooming, which points to exceeded self-cleaning (assimilation capacities of the marine ecosystem. The major polluters are the coastal towns

Two-Stage Part-Based Pedestrian Detection

DEFF Research Database (Denmark)

Møgelmose, Andreas; Prioletti, Antonio; Trivedi, Mohan M.

2012-01-01

Detecting pedestrians is still a challenging task for automotive vision system due the extreme variability of targets, lighting conditions, occlusions, and high speed vehicle motion. A lot of research has been focused on this problem in the last 10 years and detectors based on classifiers has...... gained a special place among the different approaches presented. This work presents a state-of-the-art pedestrian detection system based on a two stages classifier. Candidates are extracted with a Haar cascade classifier trained with the DaimlerDB dataset and then validated through part-based HOG...... of several metrics, such as detection rate, false positives per hour, and frame rate. The novelty of this system rely in the combination of HOG part-based approach, tracking based on specific optimized feature and porting on a real prototype....

Surgeon-level reporting presented by funnel plot is understood by doctors but inaccurately interpreted by members of the public.

Science.gov (United States)

Bhalla, Ashish; Mehrotra, Prerna; Amawi, Falah; Lund, Jonathan N

2015-01-01

Risk-adjusted outcome data for general surgeons practicing in the United Kingdom were published for the first time in 2013 with the aim of increasing transparency, improving standards, and providing the public with information to aid decision making. Most specialties used funnel plots to present their data. We assess the ability of members of the public (MoP), medical students, nonsurgical doctors (NSD), and surgeons to understand risk-adjusted surgical outcome data. A fictitious outcome dataset was created and presented in the form of a funnel plot to 10 participants from each of the aforementioned group. Standard explanatory text was provided. Each participant was given 5 minutes to review the funnel plot and complete a questionnaire. For each question, there was only 1 correct answer. Completion rate was 100% (n = 40). No difference existed between NSD and surgeons. A significant difference for identification of the "worst performing surgeon" was noted between surgeons and MoP (p plot significantly "more difficult" to interpret than surgeons did (p < 0.01) and NSD (p < 0.01). MoP found these data significantly more "difficult to understand" and were less likely to both spot "outliers" and use this data to inform decisions than doctors. Surgeons should be aware that outcome data may require an alternative method of presentation to be understood by MoP. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Pressure measurements and high speed visualizations of the cavitation phenomena at deep part load condition in a Francis turbine

International Nuclear Information System (INIS)

Yamamoto, K; Müller, A; Favrel, A; Landry, C; Avellan, F

2014-01-01

In a hydraulic power plant, it is essential to provide a reliable, sustainable and flexible energy supply. In recent years, in order to cover the variations of the renewable electricity production, hydraulic power plants are demanded to operate with more extended operating range. Under these off-design conditions, a hydraulic turbine is subject to cavitating swirl flow at the runner outlet. It is well-known that the helically/symmetrically shaped cavitation develops at the runner outlet in part load/full load condition, and it gives severe damage to the hydraulic systems under certain conditions. Although there have been many studies about partial and full load conditions, contributions reporting the deep part load condition are limited, and the cavitation behaviour at this condition is not yet understood. This study aims to unveil the cavitation phenomena at deep part load condition by high speed visualizations focusing on the draft tube cone as well as the runner blade channel, and pressure fluctuations associated with the phenomena were also investigated

Health hazards due to radon and its daughters

International Nuclear Information System (INIS)

Khan, H.A.; Qureshi, I.E.; Tufail, M.

1993-01-01

The health hazards liked to radon and its daughters have become a matter of great public concern. When inhaled, a fraction of radon is dissolved into the lung fluid, from where it is transported to other parts of the body. The radiation damage is caused to the lungs due to alpha decay of radon during its transit time within the respiratory tract. Radon daughters are found to be even more dangerous than radon itself. These daughters attach themselves to dust particles present in the air. Some of the aerosols so produced enter the lungs and enter the blood stream. It has now been confirmed that radon and its daughters contribute about 70% of the internal dose received by an individual from natural radiation sources. The danger of indoor radon and its daughters is even higher for energy-saving houses and those having poor ventilation systems. This paper briefly describes the health hazards due to radon and its daughters. Different methods employed for the measurement of concentrations of radon and their daughters are described. The experience gained from the nation-wide surveys carried out in different countries is also given. (author). 18 refs, 3 figs, 1 tab

Forest operations, extreme flooding events, and considerations for hydrologic modeling in the Appalachians--A review

Science.gov (United States)

M.A. Eisenbies; W.M. Aust; J.A. Burger; M.B. Adams

2007-01-01

The connection between forests and water resources is well established, but the relationships among controlling factors are only partly understood. Concern over the effects of forestry operations, particularly harvesting, on extreme flooding events is a recurrent issue in forest and watershed management. Due to the complexity of the system, and the cost of installing...

Experimental investigation on shrinkage and surface replication of injection moulded ceramic parts

DEFF Research Database (Denmark)

Islam, Aminul; Giannekas, Nikolaos; Marhöfer, David Maximilian

2014-01-01

Ceramic moulded parts are increasingly being used in advanced components and devices due to their unprecedented material and performance attributes. The surface finish, replication quality and material shrinkage are of immense importance for moulded ceramic parts intended for precision applications....... The current paper presents a thorough investigation on the process of ceramic moulding where it systematically characterizes the surface replication and shrinkage behaviours of precision moulded ceramic components. The test parts are moulded from Catamold TZP-A which is Y2O3-stabilised ZrO2 having widespread...... distribution for the moulded ceramic parts is presented....

Water hammer due to rapid bubble growth at a severe accident

International Nuclear Information System (INIS)

Aya, Izuo; Adachi, Masaki; Shiozaki, Koki; Inasaka, Fujio

2000-01-01

On a severe accident of the light water reactor (LWR), by steam explosion and so forth due to hydrogen formation by water-metal reaction and direct contact of molted core with water, it is presumed that a lot of vapor forms for a short time in water at reactor vessel and under part of containment vessel. This study aims at and carries out, under reference of the conventional study results, experimental elucidation on coherence of water block motion due to rapid bubble growth, proposal on reduction method of water hammering, development of water hammer estimating method in an actual reactor, and proposal for upgrading of reliability on severe accident evaluation. In 1998 fiscal year, an 'Experimental apparatus on water hammering elements on sever accident' simulated rapid bubble growth due to steam explosion by injecting high pressure air into water was produced to carry out its function test. As a result of the carried out function tests, extreme water hammering phenomena were observed, by which validity of establishment on the study objects could be confirmed. (G.K.)

THE COURSE IN TESTING THE WEARING OUT OF MUD PUMPS PARTS

Directory of Open Access Journals (Sweden)

Davorin Matanović

1989-12-01

Full Text Available Piston and cylinder are such parts in the mud pumps which cause the greatest expences due to the work stoppage of drilling rig. To reduce so caused expences it is necessary to produce spare parts of better quality. In determining the abrasion wear resistance for chosen materials, so called dry sand/rubber wheel abrasion test as an ASTM standard has been used (the paper is published in Croatian.

Part-time sick leave as a treatment method for individuals with musculoskeletal disorders.

Science.gov (United States)

Andrén, Daniela; Svensson, Mikael

2012-09-01

There is increasing evidence that staying active is an important part of a recovery process for individuals on sick leave due to musculoskeletal disorders (MSDs). It has been suggested that using part-time sick-leave rather than full-time sick leave will enhance the possibility of full recovery to the workforce, and several countries actively favor this policy. The aim of this paper is to examine if it is beneficial for individuals on sick leave due to MSDs to be on part-time sick leave compared to full-time sick leave. A sample of 1,170 employees from the RFV-LS (register) database of the Social Insurance Agency of Sweden is used. The effect of being on part-time sick leave compared to full-time sick leave is estimated for the probability of returning to work with full recovery of lost work capacity. A two-stage recursive bivariate probit model is used to deal with the endogeneity problem. The results indicate that employees assigned to part-time sick leave do recover to full work capacity with a higher probability than those assigned to full-time sick leave. The average treatment effect of part-time sick leave is 25 percentage points. Considering that part-time sick leave may also be less expensive than assigning individuals to full-time sick leave, this would imply efficiency improvements from assigning individuals, when possible, to part-time sick leave.

CO2: EDF's competitiveness is due to nuclear power

International Nuclear Information System (INIS)

Anon.

2003-01-01

The CO 2 emissions of EDF group (EDF-France + EDF-energy (UK) + Hidrocantabrico (Spain) + EnBW (Germany)) soared by 53% in 2002 which is due to the purchase of british and spanish electricity sub-companies using fossil energies. Despite this sharp increase EDF remains one of the most competitive electricity companies in Europe concerning greenhouse gas emissions. EDF group is the first electricity company in Europe, it generates 22% of the electricity produced in E.U and contributes to CO 2 emissions with a rate of 101 Kg CO 2 /MWh which 3 times less than the average rate of 20 other European companies (358 Kg CO 2 /MWh). This result is due to the large part of nuclear power in the French energy mix. The best electricity companies as far as CO 2 emissions are concerned are Statkraft (Norway) with 0 Kg CO 2 /MWh (100% hydrology) and British-energy (U.K) with 75 Kg CO 2 /MWh (75% nuclear power). At the other end we have the DEI company (Greece) with 863 Kg CO 2 /MWh (100% lignite). (A.C.)

Environmental survey of southern part of former Semipalatinsk test site

International Nuclear Information System (INIS)

Zharikov, S.K.

2000-01-01

The present paper discusses results of the environmental survey performed in selected areas of Semipalatinsk test site southern part and gives calculations of possible annual radionuclide (Cs-37, Sr-90 and Pu-239/240) intake due to local husbandry products. (author)

Part-Time Work and Work Norms in the Netherlands

NARCIS (Netherlands)

Wielers, Rudi; Raven, Dennis

We argue that in the Netherlands, due to the growth of part-time work, work norms have declined. The mechanism behind this norm change is in the changed organization of family life. The increased labour market participation of women has put the traditional organization of family life under pressure.

Comparison of blood loss between using non central part cutting knee prosthesis and distal central part cutting.

Science.gov (United States)

Malairungsakul, Anan

2014-12-01

Patients who undergo knee replacement surgery may need to receive a blood transfusion due to blood loss during the operation. Therefore it was important to improve the design of knee implant operative procedures in an attempt to reduce the rate of blood loss. The present study aimed to compare the blood loss between two types of knee replacement surgery. This is a retrospective study in which 78 patients received cemented knee replacements in Phayao Hospital between October 2010 and March 2012. There were two types of surgical procedure: 1) using an implant position covering the end of the femoral bone without cutting into the central part of the distal femoral, 2) using an implant position covering the end of the femoral bone cutting the central part of the distal femoral. Blood loss, blood transfusion, hemoglobin and hematocrit were recorded preoperatively, immediately postsurgery and 48 hours after surgery. Findings revealed that the knee replacement surgery using the implant position covering the end of the femoral bone without cutting the central part of the distal femoral significantly lowered the rate of blood loss when compared to using the implant position covering the end of the femoral bone with central cutting of the distal femor. The average blood loss during the operation without cutting at the central part of distal femoral was 49.50 ± 11.11 mL; whereas the operation cutting the central part of the distal femoral was 58.50 ± 11.69 mL. As regards blood loss, the knee replacement surgery using the implant position covering the end ofthefemoral bone without cutting the central part of distal femor was better than using the implant position covering the end of the femoral bone cutting at the central part of the distal femor.

Galeria de partes, Cuerpos Globales, presas locales.

Directory of Open Access Journals (Sweden)

Carmen Millan de Benavides.

2004-01-01

Full Text Available The author analyzes the ways in which globalization has reconfigured patterns of migration. In addition to entire communities displaced within and outside of Colombia's borders, migratory patterns revolve around flight, exile or the movement of body parts, including legs, brains and reproductive organs. This text addresses distinct types of work and the bodily transactions that each entails when migration occurs; it then explores the consequent visibility or invisibility and resulting legalization or illegality of the re-location of different body parts and the creation of new spaces. Thus, while a prostitute will never receive a visa due to the danger that she represents, a football player will not only receive citizenship, but also a privileged place as raw material in the global marketplace.

How static media is understood and used by high school science teachers

Science.gov (United States)

Hirata, Miguel

The purpose of the present study is to explore the role of static media in textbooks, as defined by Mayer (2001) in the form of printed images and text, and how these media are viewed and used by high school science teachers. Textbooks appeared in the United States in the late 1800s, and since then pictorial aids have been used extensively in them to support the teacher's work in the classroom (Giordano, 2003). According to Woodward, Elliott, and Nagel (1988/2013) the research on textbooks prior to the 1970s doesn't present relevant work related to the curricular role and the quality and instructional design of textbooks. Since then there has been abundant research, specially on the use of visual images in textbooks that has been approached from: (a) the text/image ratio (Evans, Watson, & Willows, 1987; Levin & Mayer, 1993; Mayer, 1993; Woodward, 1993), and (b) the instructional effectiveness of images (Woodward, 1993). The theoretical framework for this study comes from multimedia learning (Mayer, 2001), information design (Pettersson, 2002), and visual literacy (Moore & Dwyer, 1994). Data was collected through in-depth interviews of three high school science teachers and the graphic analyses of three textbooks used by the interviewed teachers. The interview data were compared through an analytic model developed from the literature, and the graphic analyses were performed using Mayer's multimedia learning principles (Mayer, 2001) and the Graphic Analysis Protocol (GAP) (Slough & McTigue, 2013). The conclusions of this study are: (1) pictures are specially useful for teaching science because science is a difficult subject to teach, (2) due this difficulty, pictures are very important to make the class dynamic and avoid students distraction, (3) static and dynamic media when used together can be more effective, (4) some specific type of graphics were found in the science textbooks used by the participants, in this case they were naturalistic drawings, stylized

Loose parts monitoring in light water reactor cooling systems

International Nuclear Information System (INIS)

Santos, A.; Alma, B.J.

1982-01-01

The work related to loose monitoring system for light water reactor, developed at GRS - Munique, are described. The basic problems due to the exact localization and detection of the loose part as well the research activities and development necessary aiming to obtain the best techniques in this field. (E.G.) [pt

Regional-scale brine migration along vertical pathways due to CO2 injection - Part 1: The participatory modeling approach

Science.gov (United States)

Scheer, Dirk; Konrad, Wilfried; Class, Holger; Kissinger, Alexander; Knopf, Stefan; Noack, Vera

2017-06-01

Saltwater intrusion into potential drinking water aquifers due to the injection of CO2 into deep saline aquifers is one of the potential hazards associated with the geological storage of CO2. Thus, in a site selection process, models for predicting the fate of the displaced brine are required, for example, for a risk assessment or the optimization of pressure management concepts. From the very beginning, this research on brine migration aimed at involving expert and stakeholder knowledge and assessment in simulating the impacts of injecting CO2 into deep saline aquifers by means of a participatory modeling process. The involvement exercise made use of two approaches. First, guideline-based interviews were carried out, aiming at eliciting expert and stakeholder knowledge and assessments of geological structures and mechanisms affecting CO2-induced brine migration. Second, a stakeholder workshop including the World Café format yielded evaluations and judgments of the numerical modeling approach, scenario selection, and preliminary simulation results. The participatory modeling approach gained several results covering brine migration in general, the geological model sketch, scenario development, and the review of the preliminary simulation results. These results were included in revised versions of both the geological model and the numerical model, helping to improve the analysis of regional-scale brine migration along vertical pathways due to CO2 injection.

Alterations in gray matter volume due to unilateral hearing loss

NARCIS (Netherlands)

Wang, Xingchao; Xu, Pengfei; Li, Peng; Wang, Zhenmin; Zhao, Fu; Gao, Zhixian; Xu, Lei; Luo, Yue-jia; Fan, Jin; Liu, Pinan

2016-01-01

Although extensive research on neural plasticity resulting from hearing deprivation has been conducted, the direct influence of compromised audition on the auditory cortex and the potential impact of long durations of incomplete sensory stimulation on the adult cortex are still not fully understood.

Disruption of Runx1 and Runx3 Leads to Bone Marrow Failure and Leukemia Predisposition due to Transcriptional and DNA Repair Defects

Directory of Open Access Journals (Sweden)

Chelsia Qiuxia Wang

2014-08-01

Full Text Available The RUNX genes encode transcription factors involved in development and human disease. RUNX1 and RUNX3 are frequently associated with leukemias, yet the basis for their involvement in leukemogenesis is not fully understood. Here, we show that Runx1;Runx3 double-knockout (DKO mice exhibited lethal phenotypes due to bone marrow failure and myeloproliferative disorder. These contradictory clinical manifestations are reminiscent of human inherited bone marrow failure syndromes such as Fanconi anemia (FA, caused by defective DNA repair. Indeed, Runx1;Runx3 DKO cells showed mitomycin C hypersensitivity, due to impairment of monoubiquitinated-FANCD2 recruitment to DNA damage foci, although FANCD2 monoubiquitination in the FA pathway was unaffected. RUNX1 and RUNX3 interact with FANCD2 independently of CBFβ, suggesting a nontranscriptional role for RUNX in DNA repair. These findings suggest that RUNX dysfunction causes DNA repair defect, besides transcriptional misregulation, and promotes the development of leukemias and other cancers.

Warming can boost denitrification disproportionately due to altered oxygen dynamics.

Directory of Open Access Journals (Sweden)

Annelies J Veraart

Full Text Available BACKGROUND: Global warming and the alteration of the global nitrogen cycle are major anthropogenic threats to the environment. Denitrification, the biological conversion of nitrate to gaseous nitrogen, removes a substantial fraction of the nitrogen from aquatic ecosystems, and can therefore help to reduce eutrophication effects. However, potential responses of denitrification to warming are poorly understood. Although several studies have reported increased denitrification rates with rising temperature, the impact of temperature on denitrification seems to vary widely between systems. METHODOLOGY/PRINCIPAL FINDINGS: We explored the effects of warming on denitrification rates using microcosm experiments, field measurements and a simple model approach. Our results suggest that a three degree temperature rise will double denitrification rates. By performing experiments at fixed oxygen concentrations as well as with oxygen concentrations varying freely with temperature, we demonstrate that this strong temperature dependence of denitrification can be explained by a systematic decrease of oxygen concentrations with rising temperature. Warming decreases oxygen concentrations due to reduced solubility, and more importantly, because respiration rates rise more steeply with temperature than photosynthesis. CONCLUSIONS/SIGNIFICANCE: Our results show that denitrification rates in aquatic ecosystems are strongly temperature dependent, and that this is amplified by the temperature dependencies of photosynthesis and respiration. Our results illustrate the broader phenomenon that coupling of temperature dependent reactions may in some situations strongly alter overall effects of temperature on ecological processes.

Part-time sick leave as a treatment method for individuals with musculoskeletal disorders

OpenAIRE

Andrén, Daniela; Svensson, Mikael

2009-01-01

There is increasing evidence that staying active is an important part of a recovery process for individuals on sick leave due to musculoskeletal disorders (MSDs). It has been suggested that using part-time sick-leave rather than full-time sick leave will enhance the possibility of full recovery to the workforce, and several countries actively favor this policy. However, to date only few studies have estimated the effect of using part-time sick leave in contrast to full-time sick leave. In thi...

Learning Outcomes of 'Understanding Research' as understood by ...

African Journals Online (AJOL)

Simon Bhekumuzi

vision) for using Turnitin as a deterrent, in order to help learners to learn in the process. .... such as the American Psychological Association. (APA) ..... from other people. ..... and enduring concerns (2nd ed). ... Generations: The history of.

Learning Outcomes of 'Understanding Research' as understood by ...

African Journals Online (AJOL)

Simon Bhekumuzi

2015-11-23

Nov 23, 2015 ... Can Turnitin come to the rescue: From teachers' reflections? Simon Bheki Khoza ... In South Africa, however, there are very few schools that expose teachers to Turnitin in order to ... Turnitin program by John M. Barrie, when he was a graduate ... Questions. This article intended to explore and explain teach-.

Interaction of corrosion defects in pipelines – Part 1: Fundamentals

International Nuclear Information System (INIS)

Benjamin, Adilson C.; Freire, José Luiz F.; Vieira, Ronaldo D.; Cunha, Divino J.S.

2016-01-01

Corrosion defects, also called metal loss due to corrosion, are frequently found in carbon steel pipelines. Corrosion defects may occur singly or in colonies. Usually the failure pressure of a colony of closely spaced corrosion defects is smaller than the failure pressures that the defects would attain if they were isolated. This reduction in the corroded pipe pressure strength is due to the interaction between adjacent defects. The interaction of corrosion defects in pipelines is the subject of two companion papers. In the present paper (the Part 1 paper) a literature review and the fundamentals of interaction of corrosion defects in pipelines are presented. In the subsequent paper (the Part 2 paper) initially the database of corroded pipe tests generated during the MTI JIP is described. Then the failure pressures contained in the MTI JIP database of corroded pipe tests are compared with those predicted by six of the currently available assessment methods. MTI JIP is the acronym for Mixed Type Interaction Joint Industry Project.

A spare-parts inventory program for TRIGA reactors

Energy Technology Data Exchange (ETDEWEB)

Anderson, T V; Ringle, J C; Johnson, A G [Oregon State University (United States)

1974-07-01

As is fairly common with new reactor facilities, we had a few spare parts on hand as part of our original purchase when the OSU TRIGA first went critical in March of 1967. Within a year or so, however, it became apparent that we should critically examine our spare parts inventory in order to avoid unnecessary or prolonged outages due to lack of a crucial piece of equipment. Many critical components (those which must be present and operable according to our license or technical specifications) were considered, and a priority list of acquiring these was established. This first list was drawn up in March, 1969, two years after initial criticality, and some key components were ordered. The availability of funds was the overriding restriction then and now. This spare-parts list is reviewed and new components purchased annually; the average amount spent has been about $2,000 per year. This inventory has proved invaluable more than once; without it, we would have had lengthy shutdowns awaiting the arrival of the needed component. The sobering thought, however, is that our spare-parts inventory is still not complete-far from it, in fact, because this would be prohibitively expensive. It is very difficult to guess with 100% accuracy just which component might need replacing, and your $10,000 inventory of spare parts is useless in that instance if it doesn't include the needed part. An idea worth considering is to either (a) encourage General Atomic, through the collective voice of all TRIGA owners, to maintain a rather complete inventory of replacement parts, or (b) maintain an owner's spare-parts pool, financed by contributions from all the facilities. If either of these pools was established, the needed part could reach any facility within the U.S. within a few days, minimizing reactor outage time. (author)

A spare-parts inventory program for TRIGA reactors

International Nuclear Information System (INIS)

Anderson, T.V.; Ringle, J.C.; Johnson, A.G.

1974-01-01

As is fairly common with new reactor facilities, we had a few spare parts on hand as part of our original purchase when the OSU TRIGA first went critical in March of 1967. Within a year or so, however, it became apparent that we should critically examine our spare parts inventory in order to avoid unnecessary or prolonged outages due to lack of a crucial piece of equipment. Many critical components (those which must be present and operable according to our license or technical specifications) were considered, and a priority list of acquiring these was established. This first list was drawn up in March, 1969, two years after initial criticality, and some key components were ordered. The availability of funds was the overriding restriction then and now. This spare-parts list is reviewed and new components purchased annually; the average amount spent has been about $2,000 per year. This inventory has proved invaluable more than once; without it, we would have had lengthy shutdowns awaiting the arrival of the needed component. The sobering thought, however, is that our spare-parts inventory is still not complete-far from it, in fact, because this would be prohibitively expensive. It is very difficult to guess with 100% accuracy just which component might need replacing, and your $10,000 inventory of spare parts is useless in that instance if it doesn't include the needed part. An idea worth considering is to either (a) encourage General Atomic, through the collective voice of all TRIGA owners, to maintain a rather complete inventory of replacement parts, or (b) maintain an owner's spare-parts pool, financed by contributions from all the facilities. If either of these pools was established, the needed part could reach any facility within the U.S. within a few days, minimizing reactor outage time. (author)

Alzheimer's disease due to loss of function

DEFF Research Database (Denmark)

Kepp, Kasper Planeta

2016-01-01

Alzheimer's Disease (AD) is a highly complex disease involving a broad range of clinical, cellular, and biochemical manifestations that are currently not understood in combination. This has led to many views of AD, e.g. the amyloid, tau, presenilin, oxidative stress, and metal hypotheses....... The amyloid hypothesis has dominated the field with its assumption that buildup of pathogenic β-amyloid (Aβ) peptide causes disease. This paradigm has been criticized, yet most data suggest that Aβ plays a key role in the disease. Here, a new loss-of-function hypothesis is synthesized that accounts...

The release of dissolved nutrients and metals from coastal sediments due to resuspension

Science.gov (United States)

Kalnejais, Linda H.; Martin, William R.; Bothner, Michael H.

2010-01-01

Coastal sediments in many regions are impacted by high levels of contaminants. Due to a combination of shallow water depths, waves, and currents, these sediments are subject to regular episodes of sediment resuspension. However, the influence of such disturbances on sediment chemistry and the release of solutes is poorly understood. The aim of this study is to quantify the release of dissolved metals (iron, manganese, silver, copper, and lead) and nutrients due to resuspension in Boston Harbor, Massachusetts, USA. Using a laboratory-based erosion chamber, a range of typical shear stresses was applied to fine-grained Harbor sediments and the solute concentration at each shear stress was measured. At low shear stress, below the erosion threshold, limited solutes were released. Beyond the erosion threshold, a release of all solutes, except lead, was observed and the concentrations increased with shear stress. The release was greater than could be accounted for by conservative mixing of porewaters into the overlying water, suggesting that sediment resuspension enhances the release of nutrients and metals to the dissolved phase. To address the long-term fate of resuspended particles, samples from the erosion chamber were maintained in suspension for 90. h. Over this time, 5-7% of the particulate copper and silver was released to the dissolved phase, while manganese was removed from solution. Thus resuspension releases solutes both during erosion events and over a longer timescale due to reactions of suspended particles in the water column. The magnitude of the annual solute release during erosion events was estimated by coupling the erosion chamber results with a record of bottom shear stresses simulated by a hydrodynamic model. The release of dissolved copper, lead, and phosphate due to resuspension is between 2% and 10% of the total (dissolved plus particulate phase) known inputs to Boston Harbor. Sediment resuspension is responsible for transferring a significant

Temperature field due to time-dependent heat sources in a large rectangular grid - Derivation of analytical solution

International Nuclear Information System (INIS)

Claesson, J.; Probert, T.

1996-01-01

The temperature field in rock due to a large rectangular grid of heat releasing canisters containing nuclear waste is studied. The solution is by superposition divided into different parts. There is a global temperature field due to the large rectangular canister area, while a local field accounts for the remaining heat source problem. The global field is reduced to a single integral. The local field is also solved analytically using solutions for a finite line heat source and for an infinite grid of point sources. The local solution is reduced to three parts, each of which depends on two spatial coordinates only. The temperatures at the envelope of a canister are given by a single thermal resistance, which is given by an explicit formula. The results are illustrated by a few numerical examples dealing with the KBS-3 concept for storage of nuclear waste. 8 refs

Fatigue life estimation on coke drum due to cycle optimization

Science.gov (United States)

Siahaan, Andrey Stephan; Ambarita, Himsar; Kawai, Hideki; Daimaruya, Masashi

2018-04-01

In the last decade, due to the increasing demand of petroleum product, the necessity for converting the heavy oil are increasing. Thus, demand for installing coke drum in whole world will be increase. The coke drum undergoes the cyclic high temperature and suddenly cooling but in fact is not designed to withstand that kind of cycle, thus the operational life of coke drum is much shorter in comparison to other equipment in oil refinery. Various factors determine in order to improve reliability and minimize the down time, and it is found that the cycle optimization due to cycle, temperature, and pressure have an important role. From this research it is found that the fatigue life of the short cycle is decrease by a half compare to the normal cycle. It also found that in the preheating stage, the stress peak is far exceed the yield strength of coke drum material and fall into plastic deformation. This is happened because of the temperature leap in the preheating stage that cause thermal shock in the upper part of the skirt of the coke drum.

Ductility improvement due to martensite α' decomposition in porous Ti-6Al-4V parts produced by selective laser melting for orthopedic implants.

Science.gov (United States)

Sallica-Leva, E; Caram, R; Jardini, A L; Fogagnolo, J B

2016-02-01

Ti-6Al-4V parts obtained by selective laser melting typically have an acicular α' martensitic microstructure whose ductility is low. Thus, post-heat treatments are useful for increasing ductility. In this work, the effects of sub-β-transus heat treatments on the mechanical properties of Ti-6Al-4V parts with porous structures are correlated with martensite α' phase decomposition. The precipitation of β phase and the gradual transformation of α' into α phase by the diffusion of excess vanadium from α' to β phase are proposed to be the main events of martensite α' phase decomposition in parts fabricated by selective laser melting. The heat treatment performed at 650°C for 1h produced no microstructural changes, but the samples treated for at the same temperature 2h showed a fine precipitation of β phase along the α' needle boundaries. The heat treatment performed at 800°C for 1 or 2h produced a fine α+β microstructure, in which β phase are present as particles fewer in number and larger in size, when compared with the ones present in the sample heat-treated at 650°C for 2h. Heat-treatment of the parts at 800°C for 2h proved to be the best condition, which improved the ductility of the samples while only slightly reducing their strength. Copyright © 2015 Elsevier Ltd. All rights reserved.

Surface changes of poly-L-lactic acid due to annealing

Science.gov (United States)

Juřík, P.; Michaljaničová, I.; Slepička, P.; Kolskáa, Z.; Švorčík, V.

2017-11-01

Surface modifications are very important part of both current cutting-edge research and modern manufacturing. Our research is focused on poly-L-lactic acid, which is biocompatible and biodegradable polymer that offers applications in modern medicine. We observed morphological changes of the surface of metalized samples due to annealing and studied effect of modifications on total surface area and pore surface and volume. We observed that annealing of non-metalized samples had most pronounced effect up to the 70°C, after which all observed parameters dropped significantly. Metallization has changed behaviour of the samples significantly and resulted in generally lower surface area and porosity when compared to non-metalized samples.

Activity concentration and population dose from 226Ra due to consumption of dietary components

International Nuclear Information System (INIS)

Wagh, S.S.; Patra, A.K.; Ravi, P.M.; Sarkar, P.K.

2012-01-01

226 Ra (T 1/2 = 1620 years, α-energy 4.78 MeV, 4.59 MeV, γ-energy 186 keV), a product of natural uranium decay series, is abundantly observed in natural environment. Radium, along with its homologue calcium, an essential element in the plant system, is absorbed from the soil by plants and gets redistributed. within different parts of the plants. Because of the long half-life of 226 Ra, it gets accumulated in the human body for along time. The hazard due to ingestion of 226 Ra dissolved in water is reported to be about 40 times higher than that of 90 Sr. This paper deals with the concentration of 226 Ra in different dietary components and ingestion dose from 226 Ra due to consumption of dietary components. Internal radiation exposure to non-human biota due to 226 Ra is also discussed

Life Interference Due to Gambling in Three Canadian Provinces.

Science.gov (United States)

Afifi, Tracie O; Sareen, Jitender; Taillieu, Tamara; Turner, Sarah; Fortier, Janique

2018-03-28

The gambling landscape among provinces in Canada is diverse. Yet, few studies have investigated provincial differences related to life interference due to gambling. The objectives of the current study were to examine: (1) provincial differences with regard to gambling types and (2) if gender, family history of gambling, and alcohol or drug use while gambling were related to an increased likelihood of life interference in three Canadian provinces. Data were drawn from the 2013 and 2014 cycles of the Canadian Community Health Survey from Manitoba, Saskatchewan, and British Columbia (n = 30,150). Analyses were conducted stratified by provinces and also combined using logistic regression models. Provincial differences were noted with individuals from British Columbia compared to Manitoba being less likely to play VLTs outside of casinos, play live horse racing at a track or off track, and participate in sports gambling. Those in Saskatchewan compared to Manitoba were more likely to play VLTs inside a casino. When examining all provinces combined, family history of gambling was associated with increased odds of life interference. Gender was not associated with life interference. Provincial differences were noted, which may be in part related to differences in gambling landscapes. Family history of gambling may have clinical relevance for understanding which individuals may be more likely to experience life interference due to gambling. Further research is needed to clarify the link between alcohol and drug use while gambling and life interference due to gambling as the models in the current research were likely underpowered.

Impulsivity, sensation-seeking, and part-time job status in relation to substance use and gambling in adolescents.

Science.gov (United States)

Leeman, Robert F; Hoff, Rani A; Krishnan-Sarin, Suchitra; Patock-Peckham, Julie A; Potenza, Marc N

2014-04-01

Although impulsivity, sensation-seeking, and part-time employment have each been linked to risky behaviors in adolescents, their inter-relationships are less well-understood. We examined data from adolescents to assess the following predictions: (1) sensation-seeking would relate closely to substance use and gambling; (2) impulsivity would relate closely to alcohol, drug, and gambling problems; and (3) these relationships would be particularly strong among those holding part-time jobs. High-school students (N = 3,106) were surveyed to provide data on impulsivity, sensation-seeking, and part-time job status. Bivariate and logistic regression analyses were conducted to examine relationships with gambling, substance use (i.e., alcohol, cigarettes, and marijuana) and related problems. Both impulsivity and sensation-seeking related significantly to substance use and impulsivity to gambling. Impulsivity had stronger associations with drug and gambling problems than sensation-seeking did. Students with paid part-time jobs were more likely to drink alcohol, binge drink, and use marijuana. Sensation-seeking had a particularly strong relationship to heavy cigarette smoking among students with part-time jobs. Conversely, there was little relationship between part-time job status and smoking among low sensation-seekers. These findings further support the relevance of sensation-seeking, impulsivity, and part-time job status to risky behaviors among adolescents. Sensation-seeking and impulsivity had unique relationships to risky behaviors, in accordance with theory and prior evidence. Impulsive adolescents may be in particular need for interventions to reduce drug use and gambling. Although part-time jobs can be beneficial, parents and caregivers should be mindful of potential negative ramifications of paid work outside the home. Copyright © 2014 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

[Treatment of hyperthyroidism due to Graves' disease: what is the recommended antithyroid drug during pregnancy?].

Science.gov (United States)

Caron, P

2013-05-01

Clinical hyperthyroidism during the first trimester of pregnancy due to Graves' disease can be associated with maternal, obstetrical and fetal complications, indicating an active treatment to restore normal thyroid function. Antithyroid drugs are the first line treatment in pregnant women with hyperthyroidism. Due to the increased congenital malformations reported in neonates after first-trimester carbimazole/methimazole treatment and propylthiouracil associated hepatotoxicity, the recommended treatment for pregnant women with hyperthyroid Graves' disease is propylthiouracil during the first trimester of pregnancy and following the first trimester, consideration should be given switching to carbimazole/methimazole during the second part of gestation. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Impact of hydrotherapy on skin blood flow: How much is due to moisture and how much is due to heat?

Science.gov (United States)

Petrofsky, Jerrold; Gunda, Shashi; Raju, Chinna; Bains, Gurinder S; Bogseth, Michael C; Focil, Nicholas; Sirichotiratana, Melissa; Hashemi, Vahideh; Vallabhaneni, Pratima; Kim, Yumi; Madani, Piyush; Coords, Heather; McClurg, Maureen; Lohman, Everett

2010-02-01

Hydrotherapy and whirlpool are used to increase skin blood flow and warm tissue. However, recent evidence seems to show that part of the increase in skin blood flow is not due to the warmth itself but due to the moisture content of the heat. Therefore, two series of experiments were accomplished on 10 subjects with an average age of 24.2 +/- 9.7 years and free of diabetes and cardiovascular disease. Subjects sat in a 37 degrees C hydrotherapy pool under two conditions: one in which a thin membrane protecting their skin from moisture while their arm was submerged in water and the second where their arm was allowed to be exposed to the water for 15 minutes. During this period of time, skin and body temperature were measured as well as skin blood flow by a Laser Doppler Imager. The results of the experiments showed that the vapor barrier blocked any change in skin moisture content during submersion in water, and while skin temperature was the same as during exposure to the water, the blood flow with the arm exposed to water increased from 101.1 +/- 10.4 flux to 224.9 +/- 18.2 flux, whereas blood flow increased to only 118.7 +/- 11.4 flux if the moisture of the water was blocked. Thus, a substantial portion of the increase in skin blood flow associated with warm water therapy is probably associated with moisturizing of the skin rather than the heat itself.

Does EO NDVI seasonal metrics capture variations in species composition and biomass due to grazing in semi-arid grassland savannas?

DEFF Research Database (Denmark)

Olsen, J. L.; Miehe, S.; Ceccato, Pietro

2015-01-01

Most regional scale studies of vegetation in the Sahel have been based on Earth observation (EO) imagery due to the limited number of sites providing continuous and long term in situ meteorological and vegetation measurements. From a long time series of coarse resolution normalized difference...... vegetation index (NDVI) data a greening of the Sahel since the 1980s has been identified. However, it is poorly understood how commonly applied remote sensing techniques reflect the influence of extensive grazing (and changes in grazing pressure) on natural rangeland vegetation. This paper analyses the time...... exclosures as compared to grazed areas, substantially exceeding the amount of biomass expected to be ingested by livestock for this area. The seasonal integrated NDVI (NDVI small integral; capturing only the signal inherent to the growing season recurrent vegetation), derived using absolute thresholds...

Accretion torques due to three-dimensional channelled flows in magnetic cataclysmic variables

International Nuclear Information System (INIS)

Campbell, C.G.

1986-01-01

Angular momentum transfer due to three-dimensional magnetically channelled accretion flows in cataclysmic binaries is considered. The white dwarf experiences a torque due to the twist in that part of its magnetic field which interacts with the accretion stream. The channelling process can also enhance angular momentum exchange between the stream and the orbit by increasing the gravitational torques. The components of the accretion torque are calculated for an arbitrary static magnetic orientation of the white dwarf, and their variation with orientation is presented. For high inclinations of the accreting pole to the orbital plane the component of the accretion torque parallel to this plane can be comparable to its perpendicular component. It is shown that the parallel component of the torque is still significant relative to the perpendicular component if material links to the white dwarf's magnetic field well away from the L 1 region. (author)

Analysis of Microplastics using FTIR Imaging

DEFF Research Database (Denmark)

Olesen, Kristina Borg; van Alst, Nikki; Simon, Marta

2017-01-01

In recent years, plastic pollution has received an increasing amount of interest from researchers, politicians, and the public. Microplastics (... and can remain in the environment for hundreds of years before they finally decompose. However, the accumulation level and the effects on the environment and aquatic life are poorly understood. This is partly due to a lack of standard analysis protocols and current analytical techniques...

Environmental Testing for Precision Parts and Instruments

International Nuclear Information System (INIS)

Choi, Man Yong; Park, Jeong Hak; Yun, Kyu Tek

2001-01-01

Precision parts and instruments are tested to evaluate performance in development-process and product-step to prement a potential defect due to a failure design. In this paper, Environmental test technology, which is the basis of reliability analysis, is introduced with examples of test criterion, test method for products, encoder and traffic signal controller, and measuring instruments. Recently, as the importance of the environmental test technology is recognised. It is proposed that training of test technician and technology of jig design and failure analysis are very essential

Arteriographic features of rare skin complications due to chronic osteomyelitis

International Nuclear Information System (INIS)

Boehm, E.; Wiebe, V.; Oelenberg, W.; Berufsgenossenschaftliche Krankenanstalten 'Bergmannsheil' Bochum

1984-01-01

In the period between 1970 and 1982, 6 carcinomas in scar tissue and 2 pseudocarcinomatous skin papillomatoses were found on the basis of chronic osteomyelitides. Amputation specimens of two carcinomas and one papillomatosis were examined by arteriography. Macroscopically carcinomas in scar tissue showed an unspecific appearance and microscopically a scarefied and partly pathological vascular appearance. Pseudocarcinomatous skin papillomatosis was distinctly hypervascular. Therefore, indications with regard to the localisation of an required exploratory excision can only be obtained from the vascular appearance of papillomatosis but not in case of a scar tissue carcinoma after osteomyelitis. Due to the overall bad blood circulation osteomyelitic scar tissue carcinoma scarcely reacts positively to a chemotherapeutic treatment. (orig.) [de

Pseudotumor of the Hip due to Fungal Prosthetic Joint Infection

Directory of Open Access Journals (Sweden)

Stefano Artiaco

2013-01-01

Full Text Available Pseudotumors associated with total hip arthroplasty have been associated with metal-on-metal and metal-on-polyethylene total hip arthroplasties due to a granulomatous foreign-body reaction to methyl methacrylate, polyethylene, or metal ion release, but they have not been related to prosthetic joint infections. In this paper, we report an unusual case of Candida albicans total hip arthroplasty infection, causing a large inflammatory pseudotumor of the hip joint. Fungal periprosthetic joint infections are a rare clinical entity and difficult to diagnose, and a pseudotumor may be part of their clinical presentation. They should be suspected in immunodeficient host patients when clinical symptoms of prosthetic joint infections are observed.

MRI and CT appearances in metabolic encephalopathies due to systemic diseases in adults

International Nuclear Information System (INIS)

Bathla, G.; Hegde, A.N.

2013-01-01

The term encephalopathy refers to a clinical scenario of diffuse brain dysfunction, commonly due to a systemic, metabolic, or toxic derangement. Often the clinical evaluation is unsatisfactory in this scenario and imaging plays an important role in the diagnosis, assessment of treatment response, and prognostication of the disorder. Hence, it is important for radiologists to be familiar with the imaging features of some relatively frequently acquired metabolic encephalopathies encountered in the hospital setting. This study reviews the computed tomography (CT) and magnetic resonance imaging (MRI) features of a number of metabolic encephalopathies that occur as part of systemic diseases in adults. The following conditions are covered in this review: hypoglycaemic encephalopathy, hypoxic ischaemic encephalopathy, non-ketotic hyperglycaemia, hepatic encephalopathy, uraemic encephalopathy, hyperammonaemic encephalopathy, and posterior reversible encephalopathy syndrome. MRI is the imaging method of choice in evaluating these conditions. Due to their high metabolic activity, bilateral basal ganglia changes are evident in the majority of cases. Concurrent imaging abnormalities in other parts of the central nervous system often provide useful diagnostic information about the likely underlying cause of the encephalopathy. Besides this, abnormal signal intensity and diffusion restriction patterns on MRI and MR spectroscopy features may provide important clues as to the diagnosis and guide further management. Frequently, the diagnosis is not straightforward and typical imaging features require correlation with clinical and laboratory data for accurate assessment

Hip protectors: recommendations for biomechanical testing-an international consensus statement (part I)

DEFF Research Database (Denmark)

Robinovitch, S.N.; Evans, S.L.; Minns, J.

2009-01-01

Hip protectors represent a promising strategy for preventing fall-related hip fractures. However, clinical trials have yielded conflicting results due, in part, to lack of agreement on techniques for measuring and optimizing the biomechanical performance of hip protectors as a prerequisite to cli...

Loose parts monitoring system

International Nuclear Information System (INIS)

Wakasa, Kohji; Nishida, Eiichi; Ishii, Kazuo; Yamanaka, Hiroto.

1987-01-01

In the loose parts monitoring system (LPMS), installed for integrity monitoring of the nuclear power plants; when there occur foreign metallic objects in the reactor primary system, including a steam generator and the piping, the sounds caused by them moving with the cooling water and thereby getting in contact with various structures are detected. Its purpose is, therefore, to detect any abnormality in the reactor plant system through such abnormal sounds due to loose or fallen supports etc., and so provide this information to the reactor operators. In principle, accelerometers are distributed in such as reactor vessel, steam generator, coolant pumps, etc., so that various sounds are collected and converted into electrical signals, followed by analysis of the data. Described are the LPMS configuration/functions, the course taken in LPMS development, future problems, etc. (Mori, K.)

Dealing with challenges in taking active part in care after hospitalization due to exacerbation in chronic obstructive pulmonary disease: experiences of patients and their relatives

DEFF Research Database (Denmark)

Andersen, Ingrid Charlotte; Thomsen, Thora Grothe; Poul, Bruun

daily activities. Patients’ participating in own care is crucial but little is known about patients’ and their relatives’ experienced challenges and obstacles to succeed herewith. Aim: The aim of this study was to explore COPD patients’ and their relatives’ experiences of taking active part in their own...... care within a year after hospitalization. Methods: An ethnographic inspired field study was conducted among fifteen COPD patients and twelve relatives. Data were collected by participant observation and informal interviews at hospital. This was supplemented by in-depth interviews six and twelve months...... professionals’ claims to take active part in care. Relevance to clinical practice: Healthcare professionals can learn from patients’ and relatives’ experiences to obtain insight into challenges in taking active part in their own care. The gained insight could be useful in improving future follow...

Deaths Due to Accidental Air Conditioner Compressor Explosion: A Case Series.

Science.gov (United States)

Behera, Chittaranjan; Bodwal, Jatin; Sikary, Asit K; Chauhan, Mohit Singh; Bijarnia, Manjul

2017-01-01

In an air-conditioning system, the compressor is a large electric pump that pressurizes the refrigerant gas as part of the process of turning it back into a liquid. The explosion of an air conditioner (AC) compressor is an uncommon event, and immediate death resulted from the blast effect is not reported in forensic literature. We report three such cases in which young AC mechanics were killed on the spot due to compressor blast, while repairing the domestic split AC unit. The autopsy findings, the circumstances leading to the explosion of the compressor, are discussed in this study. © 2016 American Academy of Forensic Sciences.

Facilitating age diversity in organizations ‐ part II: managing perceptions and interactions

NARCIS (Netherlands)

Annet de Lange; Jürgen Deller; Beatrice van der Heijden; Guido Hertel

2013-01-01

Purpose ‐ Due to demographic changes in most industrialized countries, the average age of working people is continuously increasing, and the workforce is becoming more age-diverse. This review, together with the earlier JMP Special Issue "Facilitating age diversity in organizations ‐ part I:

Facilitating age diversity in organizations – part II: managing perceptions and interactions

NARCIS (Netherlands)

Hertel, Guido; van der Heijden, Beatrice; de Lange, Annet H.; Deller, Jürgen

2013-01-01

Purpose – Due to demographic changes in most industrialized countries, the average age of working people is continuously increasing, and the workforce is becoming more age-diverse. This review, together with the earlier JMP Special Issue “Facilitating age diversity in organizations – part I:

Acute cholangitis due to afferent loop syndrome after a Whipple procedure: a case report.

Science.gov (United States)

Spiliotis, John; Karnabatidis, Demetrios; Vaxevanidou, Archodoula; Datsis, Anastasios C; Rogdakis, Athanasios; Zacharis, Georgios; Siamblis, Demetrios

2009-08-25

Patients with resection of stomach and especially with Billroth II reconstruction (gastro jejunal anastomosis), are more likely to develop afferent loop syndrome which is a rare complication. When the afferent part is obstructed, biliary and pancreatic secretions accumulate and cause the distention of this part. In the case of a complete obstruction (rare), there is a high risk developing necrosis and perforation. This complication has been reported once in the literature. A 54-year-old Greek male had undergone a pancreato-duodenectomy (Whipple procedure) one year earlier due to a pancreatic adenocarcinoma. Approximately 10 months after the initial operation, the patient started having episodes of cholangitis (fever, jaundice) and abdominal pain. This condition progressively worsened and the suspicion of local recurrence or stenosis of the biliary-jejunal anastomosis was discussed. A few days before his admission the patient developed signs of septic cholangitis. Our case demonstrates a rare complication with serious clinical manifestation of the afferent loop syndrome. This advanced form of afferent loop syndrome led to the development of huge enterobiliary reflux, which had a serious clinical manifestation as cholangitis and systemic sepsis, due to bacterial overgrowth, which usually present in the afferent loop. The diagnosis is difficult and the interventional radiology gives all the details to support the therapeutic decision making. A variety of factors can contribute to its development including adhesions, kinking and angulation of the loop, stenosis of gastro-jejunal anastomosis and internal herniation. In order to decompress the afferent loop dilatation due to adhesions, a lateral-lateral jejunal anastomosis was performed between the afferent loop and a small bowel loop.

Part-load performance of a high temperature Kalina cycle

International Nuclear Information System (INIS)

Modi, Anish; Andreasen, Jesper Graa; Kærn, Martin Ryhl; Haglind, Fredrik

2015-01-01

Highlights: • Detailed algorithm to solve high temperature Kalina cycle in part load. • A central receiver concentrating solar power plant with direct vapour generation considered as case study. • Part-load performance curves and fitted equations presented. - Abstract: The Kalina cycle has recently seen increased interest as an alternative to the conventional steam Rankine cycle. The cycle has been studied for use with both low and high temperature applications such as geothermal power plants, ocean thermal energy conversion, waste heat recovery, gas turbine bottoming cycle, and solar power plants. The high temperature cycle layouts are inherently more complex than the low temperature layouts due to the presence of a distillation-condensation subsystem, three pressure levels, and several heat exchangers. This paper presents a detailed approach to solve the Kalina cycle in part-load operating conditions for high temperature (a turbine inlet temperature of 500 °C) and high pressure (100 bar) applications. A central receiver concentrating solar power plant with direct vapour generation is considered as a case study where the part-load conditions are simulated by changing the solar heat input to the receiver. Compared with the steam Rankine cycle, the Kalina cycle has an additional degree of freedom in terms of the ammonia mass fraction which can be varied in order to maximize the part-load efficiency of the cycle. The results include the part-load curves for various turbine inlet ammonia mass fractions and the fitted equations for these curves.

Soybean Protein Fibres Part 2: Soybean Fibres Properties and Application Areas

Directory of Open Access Journals (Sweden)

Fatma Filiz Yıldırım

2015-01-01

Full Text Available Soybean protein fibres (SPF, which is a protein based botanic fibre, has various beneficialproperties such as softness, brightness, smoothness, drape, UV and bacterial resistance. These fibers areused in production of various yarn blends, woven, knit and nonwoven fabrics to manufature apperal andhome textiles such as t-shirts, bedding, sweater and baby dress due to these superior properties. This review,about SPF, is divided into two sections. In the first part; structure and production stages of SPF and itsenviromental effects had been described. In the second part of this review, properties and application areasof SPF have been described.

Diplopia due to Dacryops

Directory of Open Access Journals (Sweden)

Rahmi Duman

2013-01-01

Full Text Available Dacryops is a lacrimal ductal cyst. It is known that it can cause globe displacement, motility restriction, and proptosis because of the mass effect. Diplopia due to dacryops has not been reported previously. Here, we present a 57-year-old man with binocular horizontal diplopia that occurred during left direction gaze due to dacryops.

Data-Mining Toolset Developed for Determining Turbine Engine Part Life Consumption

Science.gov (United States)

Litt, Jonathan S.

2003-01-01

The current practice in aerospace turbine engine maintenance is to remove components defined as life-limited parts after a fixed time, on the basis of a predetermined number of flight cycles. Under this schedule-based maintenance practice, the worst-case usage scenario is used to determine the usable life of the component. As shown, this practice often requires removing a part before its useful life is fully consumed, thus leading to higher maintenance cost. To address this issue, the NASA Glenn Research Center, in a collaborative effort with Pratt & Whitney, has developed a generic modular toolset that uses data-mining technology to parameterize life usage models for maintenance purposes. The toolset enables a "condition-based" maintenance approach, where parts are removed on the basis of the cumulative history of the severity of operation they have experienced. The toolset uses data-mining technology to tune life-consumption models on the basis of operating and maintenance histories. The flight operating conditions, represented by measured variables within the engine, are correlated with repair records for the engines, generating a relationship between the operating condition of the part and its service life. As shown, with the condition-based maintenance approach, the lifelimited part is in service until its usable life is fully consumed. This approach will lower maintenance costs while maintaining the safety of the propulsion system. The toolset is a modular program that is easily customizable by users. First, appropriate parametric damage accumulation models, which will be functions of engine variables, must be defined. The tool then optimizes the models to match the historical data by computing an effective-cycle metric that reduces the unexplained variability in component life due to each damage mode by accounting for the variability in operational severity. The damage increment due to operating conditions experienced during each flight is used to compute

'Inca City' is Part of a Circular Feature

Science.gov (United States)

2002-01-01

MGS MOC Release No. MOC2-319, 8 August 2002 [figure removed for brevity, see original site] 'Inca City' is the informal name given by Mariner 9 scientists in 1972 to a set of intersecting, rectilinear ridges that are located among the layered materials of the south polar region of Mars. Their origin has never been understood; most investigators thought they might be sand dunes, either modern dunes or, more likely, dunes that were buried, hardened, then exhumed. Others considered them to be dikes formed by injection of molten rock (magma) or soft sediment into subsurface cracks that subsequently hardened and then were exposed at the surface by wind erosion. The Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) has provided new information about the 'Inca City' ridges, though the camera's images still do not solve the mystery. The new information comes in the form of a MOC red wide angle context frame taken in mid-southern spring, shown above left and above right. The original Mariner 9 view of the ridges is seen at the center. The MOC image shows that the 'Inca City' ridges, located at 82oS, 67oW, are part of a larger circular structure that is about 86 km (53 mi) across. It is possible that this pattern reflects an origin related to an ancient, eroded meteor impact crater that was filled-in, buried, then partially exhumed. In this case, the ridges might be the remains of filled-in fractures in the bedrock into which the crater formed, or filled-in cracks within the material that filled the crater. Or both explanations could be wrong. While the new MOC image shows that 'Inca City' has a larger context as part of a circular form, it does not reveal the exact origin of these striking and unusual martian landforms.

Health, trust, or "just understood": explicit and implicit condom decision-making processes among black, white, and interracial same-sex male couples.

Science.gov (United States)

Campbell, Chadwick K; Gómez, Anu Manchikanti; Dworkin, Shari; Wilson, Patrick A; Grisham, Kirk K; McReynolds, Jaih; Vielehr, Peter; Hoff, Colleen

2014-05-01

Among gay and bisexual men, primary partners are a leading source of HIV infection. Trust, intimacy, and advancements in HIV treatment may impact same-sex male (SSM) couples' decisions to engage in unprotected anal intercourse (UAI). This qualitative study explored how Black, White and interracial couples discussed, and made decisions regarding condoms. Qualitative interviews were conducted with 48 SSM couples in the New York and San Francisco metropolitan areas. Stratified purposive sampling was used to include Black (n = 16), White (n = 17), and interracial (Black-White) (n = 15) couples. Twenty-six couples were concordant HIV-negative and 22 were HIV-discordant. Interviews were recorded, transcribed, coded, and analyzed using a grounded theory approach. Some couples described explicit processes, which involved active discussion, while others described implicit processes, where condom-use decisions occurred without any explicit discussion. These processes also differed by race and HIV status. Black couples tended to report condom-use as "just understood." White, HIV-discordant couples decided not to use condoms, with some identifying the HIV-positive partner's suppressed viral load and high CD4 count as deciding factors. After an unplanned episode of UAI, White, HIV-negative couples tended to discontinue condom use while Black HIV-negative couples decided to revert to using condoms. HIV prevention efforts focused on same-sex, male couples must consider the explicit/implicit nature of condom decision-making processes. Understanding differences in these processes and considering relationship dynamics, across race and HIV status, can promote the development of innovative couple-level, HIV prevention interventions.

Injury due to thorotrast

International Nuclear Information System (INIS)

Mori, Takesaburo

1976-01-01

A synthetic study was performed on some of those to whom Thorotrast had been injected, in Japan. In the epidemiological study of 147 war woundeds to whom Thorotrast had been injected, it was noted that the Thorotrast injection increased the mortality rate and the incidences of malignant hepatic tumor, liver cirrhosis, and hematological diseases. Clinical study of 44 of them showed that the Thorotrast injection resulted in liver and hematopoietic hypofunctions. Analysis of the dissection of the injected area in 118 cases showed malignant hepatic tumor in 63.5%, liver cirrhosis in 14.4% and hematological diseases in 10.2%. The total of the three types of disease was 88.1%. Histological classification showed that of the malignant hepatic tumors due to Thorotrast, hepatobiliary cancer and hemangioendothelioma of the liver were frequent. By the comparison of the absorbed dose in the liver of the malignant hepatic tumors due to Thorotrast with that of the cancers developed in animal experiments, it was noted that the carcinogenic dose was a mean of 2,000 - 3,000 rad by accumulated dose. It was elucidated that carcinogenesis and fibrination were primary in injury due to Thorotrast, i.e., late injury due to Thorotrast, and that the increase in the accumulated dose in rogans and the increase of the local dose due to the gigantic growth of Thorotrast granules in organs greatly influenced carninogenesis and fibrination. (Chiba, N.)

Actual state of plant decline phenomena due to acid rain and others

International Nuclear Information System (INIS)

Yoshitake, Takashi

1992-01-01

In the national forest at the foot of Mount Tarumae which is located in the northwestern part of Tomakomai City, Hokkaido, large scale artificial afforestation of larch, spruce, white fir and other trees was carried out in the area damaged by the typhoon in 1954. However, the afforested ground suffered deadly damage by freezing and frost and the spread of disease and insect harms. Since 1960s, pines storobus which is strong to coldness and grows quickly has been planted in the area of about 2000 ha. At first its growth was good, but since 1967, the abnormal leaf falling due to unknown cause and the obstruction of growth became to be observed. At the point of time when the damage spread to several hundreds ha of the afforested ground, the causes of the potassium shortage in soil nutriment, the harms due to cold wind, salt wind and atmospheric pollution and so on were discussed. Of those, the strongest hypothesis was the obstruction of growth due to the potassium shortage in the unripe soil with the composition of volcanic released substances from Mount Tarumae. The environment in the area where abnormal leaf falling occurred, the features of the damage, the analysis of rainwater, and the mechanism of the decline are reported. (K.I.)

Effects of glass fibers on the properties of micro molded plastic parts

DEFF Research Database (Denmark)

Islam, Aminul; Hansen, Hans Nørgaard; Gasparin, Stefania

2011-01-01

Glass fibers are used to reinforce plastics and to improve their mechanical properties. But plastic filled with glass fibers is a concern for molding of micro scale plastic parts. The aim of this paper is to investigate the effects of glass fiber on the replication quality and mechanical properties...... of polymeric thin ribs. It investigates the effect of feature size and gate location on distribution of glass fibers inside the molded parts. The results from this work indicate that glass filled plastic materials have poor replication quality and nonhomogeneous mechanical properties due to the nonuniform...

Congenital Mirror Movements Due to RAD51: Cosegregation with a Nonsense Mutation in a Norwegian Pedigree and Review of the Literature

Directory of Open Access Journals (Sweden)

Oriane Trouillard

2016-11-01

Full Text Available Background: Autosomal dominant congenital mirror movements (CMM is a neurodevelopmental disorder characterized by early onset involuntary movements of one side of the body that mirror intentional movements on the contralateral side; these persist throughout life in the absence of other neurological symptoms. The main culprit genes responsible for this condition are RAD51 and DCC. This condition has only been reported in a few families, and the molecular mechanisms linking RAD51 mutations and mirror movements (MM are poorly understood. Methods: We collected demographic, clinical, and genetic data of a new family with CMM due to a truncating mutation of RAD51. We reviewed the literature to identify all reported patients with CMM due to RAD51 mutations. Results: We identified a heterozygous nonsense mutation c.760C>T (p.Arg254∗ in eight subjects: four with obvious and disabling MM, and four with a mild phenotype. Including our new family, we identified 32 patients from 6 families with CMM linked to RAD51 variants. Discussion: Our findings further support the involvement of RAD51 in CMM pathogenesis. Possible molecular mechanisms involved in CMM pathogenesis are discussed.

Patient protection in nuclear medicine due to optimization of the administered activity

International Nuclear Information System (INIS)

Perez Diaz, M.; Diaz Rizo, O.; Khouri, H. J.

2011-01-01

The possibility of a radiological risk reduction in Nuclear Medicine patients is studied through the reduced absorbed doses in organs and tissues, and whole-body effective dose due to optimization of the administered radionuclide activities. Activity values, optimized for equipments and radiopharmaceuticals available in Cuba, are compared with the IAEA recommended values and with the routinary activities in medical practice. All doses were calculated using MIRDOSE 3.0 code for each activity and medical assay. The activity optimization permits to reduce in a 50% the doses administered to patients of the major part of studied medical assays. (Author)

The importance of multidisciplinary teamwork and team climate for relational coordination among teams delivering care to older patients

OpenAIRE

Hartgerink, Jacqueline; Cramm, Jane; Bakker, Ton; Eijsden, A.; Mackenbach, Johan; Nieboer, Anna

2013-01-01

textabstractAim: To identify predictors of relational coordination among professionals delivering care to older patients. Background: Relational coordination is known to enhance quality of care in hospitals. The underlying mechanisms, however, remain poorly understood. Design: This cross-sectional study was part of a larger evaluation study examining the opportunity to prevent loss of function in older patients due to hospitalization in the Netherlands. Methods: This study was performed in sp...

The importance of multidisciplinary teamwork and team climate for relational coordination among teams delivering care to older patients

OpenAIRE

J.M. Hartgerink; J.M. Cramm; T.J.E.M. Bakker; A.M. van Eijsden; J.P. Mackenbach; A.P. Nieboer

2013-01-01

Aim To identify predictors of relational coordination among professionals delivering care to older patients. Background Relational coordination is known to enhance quality of care in hospitals. The underlying mechanisms, however, remain poorly understood. Design This cross-sectional study was part of a larger evaluation study examining the opportunity to prevent loss of function in older patients due to hospitalization in the Netherlands. Methods This study was performed in spring 2010 among ...

Fractional parts and their relations to the values of the Riemann zeta function

KAUST Repository

Alabdulmohsin, Ibrahim

2017-09-06

A well-known result, due to Dirichlet and later generalized by de la Vallée–Poussin, expresses a relationship between the sum of fractional parts and the Euler–Mascheroni constant. In this paper, we prove an asymptotic relationship between the summation of the products of fractional parts with powers of integers on the one hand, and the values of the Riemann zeta function, on the other hand. Dirichlet’s classical result falls as a particular case of this more general theorem.

Fractional parts and their relations to the values of the Riemann zeta function

KAUST Repository

Alabdulmohsin, Ibrahim

2017-01-01

A well-known result, due to Dirichlet and later generalized by de la Vallée–Poussin, expresses a relationship between the sum of fractional parts and the Euler–Mascheroni constant. In this paper, we prove an asymptotic relationship between the summation of the products of fractional parts with powers of integers on the one hand, and the values of the Riemann zeta function, on the other hand. Dirichlet’s classical result falls as a particular case of this more general theorem.

Abrupt increases in Amazonian tree mortality due to drought–fire interactions

Science.gov (United States)

Brando, Paulo Monteiro; Balch, Jennifer K.; Nepstad, Daniel C.; Morton, Douglas C.; Putz, Francis E.; Coe, Michael T.; Silvério, Divino; Macedo, Marcia N.; Davidson, Eric A.; Nóbrega, Caroline C.; Alencar, Ane; Soares-Filho, Britaldo S.

2014-01-01

Interactions between climate and land-use change may drive widespread degradation of Amazonian forests. High-intensity fires associated with extreme weather events could accelerate this degradation by abruptly increasing tree mortality, but this process remains poorly understood. Here we present, to our knowledge, the first field-based evidence of a tipping point in Amazon forests due to altered fire regimes. Based on results of a large-scale, long-term experiment with annual and triennial burn regimes (B1yr and B3yr, respectively) in the Amazon, we found abrupt increases in fire-induced tree mortality (226 and 462%) during a severe drought event, when fuel loads and air temperatures were substantially higher and relative humidity was lower than long-term averages. This threshold mortality response had a cascading effect, causing sharp declines in canopy cover (23 and 31%) and aboveground live biomass (12 and 30%) and favoring widespread invasion by flammable grasses across the forest edge area (80 and 63%), where fires were most intense (e.g., 220 and 820 kW⋅m−1). During the droughts of 2007 and 2010, regional forest fires burned 12 and 5% of southeastern Amazon forests, respectively, compared with Amazon forests. Future projections of vegetation responses to climate change across drier portions of the Amazon require more than simulation of global climate forcing alone and must also include interactions of extreme weather events, fire, and land-use change. PMID:24733937

Metals for bone implants. Part 1. Powder metallurgy and implant rendering.

Science.gov (United States)

Andani, Mohsen Taheri; Shayesteh Moghaddam, Narges; Haberland, Christoph; Dean, David; Miller, Michael J; Elahinia, Mohammad

2014-10-01

New metal alloys and metal fabrication strategies are likely to benefit future skeletal implant strategies. These metals and fabrication strategies were looked at from the point of view of standard-of-care implants for the mandible. These implants are used as part of the treatment for segmental resection due to oropharyngeal cancer, injury or correction of deformity due to pathology or congenital defect. The focus of this two-part review is the issues associated with the failure of existing mandibular implants that are due to mismatched material properties. Potential directions for future research are also studied. To mitigate these issues, the use of low-stiffness metallic alloys has been highlighted. To this end, the development, processing and biocompatibility of superelastic NiTi as well as resorbable magnesium-based alloys are discussed. Additionally, engineered porosity is reviewed as it can be an effective way of matching the stiffness of an implant with the surrounding tissue. These porosities and the overall geometry of the implant can be optimized for strain transduction and with a tailored stiffness profile. Rendering patient-specific, site-specific, morphology-specific and function-specific implants can now be achieved using these and other metals with bone-like material properties by additive manufacturing. The biocompatibility of implants prepared from superelastic and resorbable alloys is also reviewed. Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Finanční due diligence

OpenAIRE

Slonka, Tomáš

2015-01-01

Thesis on financial due diligence focuses on the use of due diligence in practice. The aim of this work is to determine the risk for the investor and the calculation of the target company with and without conducting due diligence, thus finding out the added value of due diligence.

5 CFR 732.301 - Due process.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Due process. 732.301 Section 732.301...) NATIONAL SECURITY POSITIONS Due Process and Reporting § 732.301 Due process. When an agency makes an... any determination. (b) Comply with all applicable administrative due process requirements, as provided...

Human due diligence.

Science.gov (United States)

Harding, David; Rouse, Ted

2007-04-01

Most companies do a thorough job of financial due diligence when they acquire other companies. But all too often, deal makers simply ignore or underestimate the significance of people issues in mergers and acquisitions. The consequences are severe. Most obviously, there's a high degree of talent loss after a deal's announcement. To make matters worse, differences in decision-making styles lead to infighting; integration stalls; and productivity declines. The good news is that human due diligence can help companies avoid these problems. Done early enough, it helps acquirers decide whether to embrace or kill a deal and determine the price they are willing to pay. It also lays the groundwork for smooth integration. When acquirers have done their homework, they can uncover capability gaps, points of friction, and differences in decision making. Even more important, they can make the critical "people" decisions-who stays, who goes, who runs the combined business, what to do with the rank and file-at the time the deal is announced or shortly thereafter. Making such decisions within the first 30 days is critical to the success of a deal. Hostile situations clearly make things more difficult, but companies can and must still do a certain amount of human due diligence to reduce the inevitable fallout from the acquisition process and smooth the integration. This article details the steps involved in conducting human due diligence. The approach is structured around answering five basic questions: Who is the cultural acquirer? What kind of organization do you want? Will the two cultures mesh? Who are the people you most want to retain? And how will rank-and-file employees react to the deal? Unless an acquiring company has answered these questions to its satisfaction, the acquisition it is making will be very likely to end badly.

Overcurrent protection issues due to the DG connection

Energy Technology Data Exchange (ETDEWEB)

Gomez, J.C.; Tourn, D.H.; Amatti, J.C. [Rio Cuarto National University (IPSEP/UNRC), Cordoba (Argentina). Electric Power Systems Protection Institute], E-mail: jcgomez@ing.unrc.edu.ar

2009-07-01

The present energy crisis drives to carry to an extreme the use of all the available energy sources, which need to be connected to the network in their closest point. Traditional electric systems are changing their characteristics, in what concerns to structure, operation, and especially on protection methodologies. The new protection problems of the different parts of the system are explained. The solution presents positive and negative aspects that impact the utility and the customer in different ways. A revision about interconnection international standards is presented. The contributions of generators to short circuit currents is analyzed, especially the double fed generator. Philosophy changes are studied, such as: fault current bi directionality, modification of the protection reach, failures of the overcurrent coordination due to current share, etc. Solicitations to DG due to the normal unbalance of distribution systems are also studied. It is analyzed the discrepancy between the customers and utilities regarding the 'islanding operation', presenting the semi-rigid connection. The changes in the coordination methodology fusible-recloser are also studied, proposing a new methodology to check this coordination. Experimental results on 13.2 kV are presented that relate the deionization without zero current, with arc length and with 'network power to DG power ratio'. It is concluded that DG application offers technical-economic advantages so much to the utility as to the user; and that the technology for these new protection approaches is already available, requiring of investments whose justification needs of a specific analysis for each particular case. (author)

Analysis of ultrasonic beam profile due to change of elements' number for phased array transducer (part 2)

International Nuclear Information System (INIS)

Choi, Sang Woo; Lee, Joon Hyun

1998-01-01

The phased array offers many advantages and improvements over conventional single-element transducers such as the straight-beam and angle-beam. The advantages of array sensors for large structures are two folds; firstly, array transducers provide a method of rapid beam steering and sequential addressing of a large area of interest without requiring mechanical or manual scanning which is particularly important in real-time application. Secondly, array transducer provide a method of dynamic focusing, in which the focal length of the ultrasonic beam varies as the pulse propagates through the material. There are some parameters such as number, size, center to center space of elements to design phased array transducer. In previous study. the characteristics of beam steering and dynamic focusing had been simulated for ultrasonic SH-wave with varying the number of phased array transducer's element. In this study, the characteristic of beam steering for phased array transducer has been simulated for ultrasonic SH-wave on the basis of Huygen's principle with varying center to center space of elements. Ultrasonic beam directivity and focusing due to change of time delay of each element were discussed with varying center to center space of elements.

Influence of upstream disturbance on the draft-tube flow of Francis turbine under part-load conditions

Science.gov (United States)

Chen, Ting; Zheng, Xianghao; Zhang, Yu-ning; Li, Shengcai

2018-02-01

Owing to the part-load operations for the enhancement of grid flexibility, the Francis turbine often suffers from severe low-frequency and large-amplitude hydraulic instability, which is mostly pertinent to the highly unsteady swirling vortex rope in the draft tube. The influence of disturbances in the upstream (e.g., large-scale vortex structures in the spiral casing) on the draft-tube vortex flow is not well understood yet. In the present paper, the influence of the upstream disturbances on the vortical flow in the draft tube is studied based on the vortex identification method and the analysis of several important parameters (e.g., the swirl number and the velocity profile). For a small guide vane opening (representing the part-load condition), the vortices triggered in the spiral casing propagate downstream and significantly affect the swirling vortex-rope precession in the draft tube, leading to the changes of the intensity and the processional frequency of the swirling vortex rope. When the guide vane opening approaches the optimum one (representing the full-load condition), the upstream disturbance becomes weaker and thus its influences on the downstream flow are very limited.

Laser Ultrasound Spectroscopy Scanning for 3D Printed Parts

Energy Technology Data Exchange (ETDEWEB)

Brennan, Guendalyn Kendra [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-08-04

One of the challenges of additive manufacturing is quality control due to the possibility of unseen flaws in the final product. The current methods of inspection are lacking in detail, too slow for practical use, or unable to validate internal structure. This report examines the use of laser ultrasound spectroscopy in layer by layer scans of 3D printed parts as they are created. The result is fast and detailed quality control. An additional advantage of this method is the ability to cancel a print as soon as a defect is detected, therefore saving materials and time. This technique, though simple in concept, has been a challenge to implement. I discuss tweaking the 3D printer configuration, and finding the optimal settings for laser scanning small parts made of ABS plastic, as well as the limits of how small of a detail the laser can detect. These settings include the frequency of the ultrasonic transducer, the speed of the laser, and the distance from the laser to the part.

Part-based deep representation for product tagging and search

Science.gov (United States)

Chen, Keqing

2017-06-01

Despite previous studies, tagging and indexing the product images remain challenging due to the large inner-class variation of the products. In the traditional methods, the quantized hand-crafted features such as SIFTs are extracted as the representation of the product images, which are not discriminative enough to handle the inner-class variation. For discriminative image representation, this paper firstly presents a novel deep convolutional neural networks (DCNNs) architect true pre-trained on a large-scale general image dataset. Compared to the traditional features, our DCNNs representation is of more discriminative power with fewer dimensions. Moreover, we incorporate the part-based model into the framework to overcome the negative effect of bad alignment and cluttered background and hence the descriptive ability of the deep representation is further enhanced. Finally, we collect and contribute a well-labeled shoe image database, i.e., the TBShoes, on which we apply the part-based deep representation for product image tagging and search, respectively. The experimental results highlight the advantages of the proposed part-based deep representation.

Switch-shock wave structure in a magnetized partly-ionized gas

International Nuclear Information System (INIS)

Cramer, N.F.

1975-01-01

The effect of the interaction of plasma and neutral gas on the structure of switch-type shock waves propagating in a partly-ionized gas is studied. These shocks, in which the magnetic field is perpendicular to the shock front either upstream or downstream, exhibit a spiralling behaviour of the magnetic field in the shock transition region, if the Hall term is important in the Ohm's law. Observations of this behaviour for shocks propagating into a plasma with a residual neutral content of about 15% has implied an anomalously high resistivity of the plasma. We show that this can be partly explained by considering the collisions of ions with the neutral atoms in a magnetic field. We show that the extra dissipation due to the increase in resistivity goes primarily to the ions and neutrals. Thus even in the absence of viscous dissipation within each species, the heavy particles can be appreciably heated in a shock propagating into a partly-ionized gas in a magnetic field. (author)

[Part-time medical specialist training; experiences with job-sharing for trainee internists

NARCIS (Netherlands)

Bevers, K.; Nauta, S.; Stuyt, P.M.J.

2004-01-01

Due to various factors such as social changes, an increasing number of couples with two incomes, and a growing proportion of female doctors, there has been a growing demand for part-time work in recent years. This is also true for resident physicians. Objections such as a discontinuity in care and

How Self-Reliance Is Understood: Viewpoints from One Local ...

African Journals Online (AJOL)

DrNneka

intervention makes it easy to see why there is less commitment to ... funding for countries where crisis' stretch government ability to respond ... National agencies such as DfID (UK), Norad (Norway), USAID (USA) and GIZ .... This case study uses a qualitative research design consistent with DiCicco- ..... Swedish International.

Prevalence of obesity: A public health problem poorly understood

Science.gov (United States)

This review article discusses the Dietary Guidelines for Americans in support of a total diet approach to achieving diet and health goals, especially as they relate to the obesity epidemic. However, some scientists and organizations have identified one food, food group, or nutrient as the cause of t...

Inclusion understood from the perspectives of children with disability.

Science.gov (United States)

Spencer-Cavaliere, Nancy; Watkinson, E Jane

2010-10-01

This study explored the perspectives of children with disabilities regarding the concept of inclusion in physical activity. Participants were children (two girls, nine boys, Mage = 10 years, five months, age range: 8-12 years) with disabilities, including cerebral palsy, fine and gross motor delays, developmental coordination disorder, muscular dystrophy, nemaline myopathy, brachial plexus injury, and severe asthma. Children's perspectives on inclusion in physical activity (e.g., sports, games, and play) were explored through semistructured interviews. Interviews were digitally audio taped and transcribed verbatim. Data were analyzed through content analysis. Three themes emerged from the data: gaining entry to play, feeling like a legitimate participant, and having friends. These themes were associated with feeling included to varying degrees in sports, games, and play. In essence, it was the actions of others that were the prominent features identified by children that contributed to feeling more or less included in physical activity contexts. These results are discussed in relation to inclusion in physical education, recreation, and unstructured free play.

English in Dutch commercials: Not understood and not appreciated

NARCIS (Netherlands)

Gerritsen, M.; Korzilius, H.P.L.M.; Meurs, W.F.J. van; Gijsbers, I.

2000-01-01

Dutch consumers are increasingly exposed to English in commercials on television. Advertising agencies appear to use English because of financial and image reasons. This article investigates how often commercials that contain English occur in the Netherlands and whether consumers comprehend the

Happiness in Economics as Understood Across Ism and Religion

OpenAIRE

Abdul Ghafar Ismail; Nurfaradilla Haron

2014-01-01

The concept of happiness has been discussed long time ago by economists. Recently, it became the most related and important thing to be studied because of its impact in societies. Discussion about happiness basically interprets within two separate views. First, happiness related with economic variable, for instance, how money can create happiness. Second happiness is discussed within the context of religion. However, t...

On being understood: clarity and jargon in radiation protection.

Science.gov (United States)

Strom, Daniel J; Watson, Charles R

2002-03-01

While much of the language used to express the concepts of radiation protection works effectively, there are many ill-chosen names and phrases and much jargon that permeate our professional speech and writing. From the oxymoron "internal exposure" to the "snarl word" "decay," there is much room for improvement. This essay identifies many of the problems and suggests solutions. We examine the kinds of confusions that can result from using familiar words with unfamiliar meanings and the need for neology. We offer insights into specific and unambiguous naming of physical quantities and explore the seemingly unlimited kinds of "dose." We disaggregate exposure from irradiation following intakes, and unmask units like "gram rad per microcurie hour." We call for a definition of radiation weighting factor that doesn't result in a violation of the law of conservation of energy. We examine the subtleties of distinguishing between radiation and radioactive materials. Some words, such as "exposure," have multiple meanings, while at other times there are different words or phrases with the same meaning, such as "critical level" and "decision level" or "detection level" and "minimum detectable amount." Sometimes phrases are used whose meaning is unclear or not agreed upon, such as "lower limit of detection." Sometimes there are words that are simply not apt, such as "disintegration" applied to the emission of a subatomic particle from a nucleus.

Diabetes due to recurrent pancreatitis secondary to hypercalcemia due to primary hyperparathyroidism

Directory of Open Access Journals (Sweden)

Sumit Kumar Chakrabarti

2013-01-01

Full Text Available Acute pancreatitis due to hypercalcemia associated with hyperparathyroidism (HPT is not very common. We herein report a case of a 21-year-old woman, who presented with acute pancreatitis. She had a past history of recurrent nephrolithiasis. Subsequent evaluation revealed hypercalcemia (serum calcium: 12.6 mg/dL; low phosphate (2.9 mg/dL with elevated parathyroid hormone (PTH, 156.7 pg/mL and HbA1c (6.9%. Diagnosis of primary HPT (PHPT was made. Recurrent pancreatitis due to hypercalcemia may have resulted in diabetes mellitus.

Vitamin D Status and the Host Resistance to Infections: What It Is Currently (Not) Understood.

Science.gov (United States)

Lang, Pierre Olivier; Aspinall, Richard

2017-05-01

Vitamin D is increasingly thought to play a role in regulating immunity. This comprehensive review updates the current understanding regarding ways in which we believe that vitamin D regulates responsiveness of the immune system and how serum status modulates the host defense against pathogens. The literature was searched by using PubMed and Scopus with the following key words: vitamin D, immunity, innate and adaptive immunity, infectious disease, and vaccine response. Vitamin D deficiency remains a major public health concern worldwide. The overall body of evidence confirms that vitamin D plays an important role in modulating the immune response to infections. Epidemiologic studies suggest a clear association between vitamin D deficiency and susceptibility to various pathogens. However, translation of vitamin D use into the clinic as a means of controlling infections is fraught with methodologic and epidemiologic challenges. The recent discovery of alternative activation pathways, different active forms of vitamin D, and possible interaction with non-vitamin D receptors provide further complications to an already complex interaction between vitamin D and the immune system. Moreover, it has become apparent that the individual responsiveness to supplementation is more dynamic than presumed from the static assessment of 25-hydroxy vitamin D status. Furthermore, the epigenetic response at the level of the individual to environmental changes and lifestyle or health conditions provides greater variation than those resulting from vitamin D receptor polymorphisms. To understand the future of vitamin D with respect to clinical applications in the prevention and better control of infectious diseases, it is necessary to determine all aspects of vitamin D metabolism, as well as the mechanisms by which active forms interact with the immune system globally. For the most part, we are unable to identify tissue-specific applications of supplementation except for those subjects at

Nuclear, biological and chemical warfare. Part I: Medical aspects of nuclear warfare.

Science.gov (United States)

Kasthuri, A S; Pradhan, A B; Dham, S K; Bhalla, I P; Paul, J S

1990-04-01

Casualties in earlier wars were due much more to diseases than to weapons. Mention has been made in history of the use of biological agents in warfare, to deny the enemy food and water and to cause disease. In the first world war chemical agents were used to cause mass casualties. Nuclear weapons were introduced in the second world war. Several countries are now involved in developing nuclear, biological and chemical weapon systems, for the mass annihilation of human beings, animals and plants, and to destroy the economy of their enemies. Recently, natural calamities and accidents in nuclear, chemical and biological laboratories and industries have caused mass instantaneous deaths in civilian population. The effects of future wars will not be restricted to uniformed persons. It is time that physicians become aware of the destructive potential of these weapons. Awareness, immediate protective measures and first aid will save a large number of persons. This series of articles will outline the medical aspects of nuclear, biological and chemical weapon systems in three parts. Part I will deal with the biological effects of a nuclear explosion. The short and long term effects due to blast, heat and associated radiation are highlighted. In Part II, the role of biological agents which cause commoner or new disease patterns is mentioned. Some of the accidents from biological warfare laboratories are a testimony to its potential deleterious effects. Part III deals with medical aspects of chemical warfare agents, which in view of their mass effects can overwhelm the existing medical resources, both civilian and military.(ABSTRACT TRUNCATED AT 250 WORDS)

Deference and Due Process

OpenAIRE

Vermeule, Cornelius Adrian

2015-01-01

In the textbooks, procedural due process is a strictly judicial enterprise; although substantive entitlements are created by legislative and executive action, it is for courts to decide independently what process the Constitution requires. The notion that procedural due process might be committed primarily to the discretion of the agencies themselves is almost entirely absent from the academic literature. The facts on the ground are very different. Thanks to converging strands of caselaw ...

Hip protectors: recommendations for conducting clinical trials--an international consensus statement (part II)

DEFF Research Database (Denmark)

Cameron, I D; Robinovitch, S; Birge, S

2010-01-01

While hip protectors are effective in some clinical trials, many, including all in community settings, have been unable to demonstrate effectiveness. This is due partly to differences in the design and analysis. The aim of this report is to develop recommendations for subsequent clinical research....

Methods of approaching decoherence in the flavor sector due to space-time foam

Science.gov (United States)

Mavromatos, N. E.; Sarkar, Sarben

2006-08-01

In the first part of this work we discuss possible effects of stochastic space-time foam configurations of quantum gravity on the propagation of “flavored” (Klein-Gordon and Dirac) neutral particles, such as neutral mesons and neutrinos. The formalism is not the usually assumed Lindblad one, but it is based on random averages of quantum fluctuations of space-time metrics over which the propagation of the matter particles is considered. We arrive at expressions for the respective oscillation probabilities between flavors which are quite distinct from the ones pertaining to Lindblad-type decoherence, including in addition to the (expected) Gaussian decay with time, a modification to oscillation behavior, as well as a power-law cutoff of the time-profile of the respective probability. In the second part we consider space-time foam configurations of quantum-fluctuating charged-black holes as a way of generating (parts of) neutrino mass differences, mimicking appropriately the celebrated Mikheyev-Smirnov-Wolfenstein (MSW) effects of neutrinos in stochastically fluctuating random media. We pay particular attention to disentangling genuine quantum-gravity effects from ordinary effects due to the propagation of a neutrino through ordinary matter. Our results are of interest to precision tests of quantum-gravity models using neutrinos as probes.

Radiobiology in clinical radiation therapy - Part III: Normal tissue damage

International Nuclear Information System (INIS)

Travis, Elizabeth L.

1996-01-01

Objective: This is the third part of a course designed for residents in radiation oncology preparing for their boards. This part of the course will focus on the mechanisms underlying damage in normal tissues. Although conventional wisdom long held that killing and depletion of a critical cell(s) in a tissue was responsible for the later expression of damage, histopathologic changes in normal tissue can now be explained and better understood in terms of the new molecular biology. The concept that depletion of a single cell type is responsible for the observed histopathologic changes in normal tissues has been replaced by the hypothesis that damage results from the interaction of many different cell systems, including epithelial, endothelial, macrophages and fibroblasts, via the production of specific autocrine, paracrine and endocrine growth factors. A portion of this course will discuss the clinical and experimental data on the production and interaction of those cytokines and cell systems considered to be critical to tissue damage. It had long been suggested that interindividual differences in radiation-induced normal tissue damage was genetically regulated, at least in part. Both clinical and experimental data supported this hypothesis but it is the recent advances in human and mouse molecular genetics which have provided the tools to dissect out the genetic component of normal tissue damage. These data will be presented and related to the potential to develop genetic markers to identify sensitive individuals. The impact on clinical outcome of the ability to identify prospectively sensitive patients will be discussed. Clinically it is well-accepted that the volume of tissue irradiated is a critical factor in determining tissue damage. A profusion of mathematical models for estimating dose-volume relationships in a number of organs have been published recently despite the fact that little data are available to support these models. This course will review the

Determining casting defects in near-net shape casting aluminum parts by computed tomography

Science.gov (United States)

Li, Jiehua; Oberdorfer, Bernd; Habe, Daniel; Schumacher, Peter

2018-03-01

Three types of near-net shape casting aluminum parts were investigated by computed tomography to determine casting defects and evaluate quality. The first, second, and third parts were produced by low-pressure die casting (Al-12Si-0.8Cu-0.5Fe-0.9Mg-0.7Ni-0.2Zn alloy), die casting (A356, Al-7Si-0.3Mg), and semi-solid casting (A356, Al-7Si-0.3Mg), respectively. Unlike die casting (second part), low-pressure die casting (first part) significantly reduced the formation of casting defects (i.e., porosity) due to its smooth filling and solidification under pressure. No significant casting defect was observed in the third part, and this absence of defects indicates that semi-solid casting could produce high-quality near-net shape casting aluminum parts. Moreover, casting defects were mostly distributed along the eutectic grain boundaries. This finding reveals that refinement of eutectic grains is necessary to optimize the distribution of casting defects and reduce their size. This investigation demonstrated that computed tomography is an efficient method to determine casting defects in near-net shape casting aluminum parts.

Assessment of occupational exposure due to external sources of radiation. Safety guide

International Nuclear Information System (INIS)

2000-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

Assessment of occupational exposure due to external sources of radiation. Safety guide

International Nuclear Information System (INIS)

2004-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

Assessment of occupational exposure due to external sources of radiation. Safety guide

International Nuclear Information System (INIS)

1999-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

Statistical evaluations concerning the failure behaviour of formed parts with superheated steam flow. Pt. 1

International Nuclear Information System (INIS)

Oude-Hengel, H.H.; Vorwerk, K.; Heuser, F.W.; Boesebeck, K.

1976-01-01

Statistical evaluations concerning the failure behaviour of formed parts with superheated-steam flow were carried out using data from VdTUEV inventory and failure statistics. Due to the great number of results, the findings will be published in two volumes. This first part will describe and classify the stock of data and will make preliminary quantitative statements on failure behaviour. More differentiated statements are made possible by including the operation time and the number of start-ups per failed part. On the basis of time-constant failure rates some materials-specific statements are given. (orig./ORU) [de

Radiative corrections for semileptonic decays of hyperons: the 'model independent' part

International Nuclear Information System (INIS)

Toth, K.; Szegoe, K.; Margaritis, T.

1984-04-01

The 'model independent' part of the order α radiative correction due to virtual photon exchanges and inner bremsstrahlung is studied for semileptonic decays of hyperons. Numerical results of high accuracy are given for the relative correction to the branching ratio, the electron energy spectrum and the (Esub(e),Esub(f)) Dalitz distribution in the case of four different decays. (author)

Recurrent microdeletion at 17q12 as a cause of Mayer-Rokitansky-Kuster-Hauser (MRKH) syndrome: two case reports

OpenAIRE

Novelli Antonio; Fedele Luigi; Divizia Maria; Barbano Giancarlo; Frontino Giada; Baban Anwar; Carella Massimo; Gervasini Cristina; Gimelli Stefania; Bernardini Laura; Béna Frédérique; Lalatta Faustina; Miozzo Monica; Dallapiccola Bruno

2009-01-01

Abstract Background Mayer-Rokitansky-Kuster-Hauser syndrome (MRKH) consists of congenital aplasia of the uterus and the upper part of vagina due to anomalous development of Müllerian ducts, either isolated or associated with other congenital malformations, including renal, skeletal, hearing and heart defects. This disorder has an incidence of approximately 1 in 4500 newborn girls and the aetiology is poorly understood. Methods and Results we report on two patients affected by MRKH syndrome in...

Leptin Action on GABAergic Neurons Prevents Obesity and Reduces Inhibitory Tone to POMC Neurons

OpenAIRE

Vong, Linh; Ye, Chianping; Yang, Zongfang; Choi, Brian; Chua, Streamson; Lowell, Bradford B.

2011-01-01

Leptin acts in the brain to prevent obesity. The underlying neurocircuitry responsible for this is poorly understood, in part due to incomplete knowledge regarding first order, leptin-responsive neurons. To address this, we and others have been removing leptin receptors from candidate first order neurons. While functionally relevant neurons have been identified, the observed effects have been small suggesting that most first order neurons remain unidentified. Here we take an alternative appro...

Anaphylaxis due to caffeine

OpenAIRE

Sugiyama, Kumiya; Cho, Tatsurai; Tatewaki, Masamitsu; Onishi, Shogo; Yokoyama, Tatsuya; Yoshida, Naruo; Fujimatsu, Takayoshi; Hirata, Hirokuni; Fukuda, Takeshi; Fukushima, Yasutsugu

2015-01-01

We report a rare case of anaphylaxis due to caffeine intake. A 27-year-old woman suffered her first episode of anaphylaxis and a positive skin prick test suggested that the anaphylaxis was due to an IgE-mediated hypersensitivity reaction to caffeine. She was diagnosed with caffeine allergy and has not had an allergic reaction after avoiding foods and drinks containing caffeine. Although caffeine is known to have antiallergic effects, this case shows that caffeine can be an allergen and cause ...

Ultrafast nonlinear dynamics of thin gold films due to an intrinsic delayed nonlinearity

DEFF Research Database (Denmark)

Bache, Morten; Lavrinenko, Andrei

2017-01-01

Using long-range surface plasmon polaritons light can propagate in metal nano-scale waveguides for ultracompact opto-electronic devices. Gold is an important material for plasmonic waveguides, but although its linear optical properties are fairly well understood, the nonlinear response is still...

Orthogonal cutting of laser beam melted parts

Science.gov (United States)

Götze, Elisa; Zanger, Frederik; Schulze, Volker

2018-05-01

The finishing process of parts manufactured by laser beam melting is of high concern due to the lack of surface accuracy. Therefore, the focus of this work lies on the influence of the build-up direction of the parts and their effect on the finishing process. The orthogonal cutting reveals findings in the fields of chip formation, involved forces and temperatures appearing during machining. In the investigations, the cutting depth was varied between 0.05 and 0.15 mm representing a finishing process and the cutting velocity ranges from 30 to 200 m/min depending on the material. The experiments contain the materials stainless steel (AISI 316L), titanium (Ti6Al4V) and nickel-base alloy (IN718). The two materials named latter are of high interest in the aerospace sector and at the same time titanium is used in the medical field due to its biocompatibility. For the materials IN718 and Ti6Al4V a negative rake angle of -7.5° and for stainless steel a rake angle of 12.5° are chosen for the cutting experiments. The results provide the base for processing strategies. Therefore, the specimens were solely laser beam melted without post-processing like heat treatment. The evaluation of the experiments shows that an increase in cutting speed has different effects depending on the material. For stainless steel the measured forces regarding the machining direction to the layers approach the same values. In contrast, the influence of the layers regarding the forces appearing during orthogonal cutting of the materials IN718 and Ti6Al4V differ for lower cutting speeds.

Conformational changes of the N-terminal part of Mason-Pfizer monkey virus p12 protein during multimerization

International Nuclear Information System (INIS)

Knejzlik, Zdenek; Ulbrich, Pavel; Strohalm, Martin; Lastuvkova, Hana; Kodicek, Milan; Sakalian, Michael; Ruml, Tomas

2009-01-01

The Mason-Pfizer monkey virus is a prototype Betaretrovirus with the defining characteristic that it assembles spherical immature particles from Gag-related polyprotein precursors within the cytoplasm of the infected cell. It was shown previously that the N-terminal part of the Gag p12 domain (wt-Np12) is required for efficient assembly. However, the precise role for p12 in mediating Gag-Gag interaction is still poorly understood. In this study we employed detailed circular dichroism spectroscopy, electron microscopy and ultracentrifugation analyses of recombinant wt-Np12 prepared by in vitro transcription and translation. The wt-Np12 domain fragment forms fibrillar structures in a concentration-dependent manner. Assembly into fibers is linked to a conformational transition from unfolded or another non-periodical state to α-helix during multimerization.

Temperature field due to time-dependent heat sources in a large rectangular grid. Application for the KBS-3 repository

International Nuclear Information System (INIS)

Probert, T.; Claesson, Johan

1997-04-01

In the KBS-3 concept canisters containing nuclear waste are deposited along parallel tunnels over a large rectangular area deep below the ground surface. The temperature field in rock due to such a rectangular grid of heat-releasing canisters is studied. An analytical solution for this problem for any heat source has been presented in a preceding paper. The complete solution is summarized in this paper. The solution is by superposition divided into two main parts. There is a global temperature field due to the large rectangular canister area, while a local field accounts for the remaining heat source problem. In this sequel to the first report, the local solution is discussed in detail. The local solution consists of three parts corresponding to line heat sources along tunnels, point heat sources along a tunnel and a line heat source along a canister. Each part depends on two special variables only. These parts are illustrated in dimensionless form. Inside the repository the local temperature field is periodic in the horizontal directions and has a short extent in the vertical direction. This allows us to look at the solution in a parallelepiped around a canister. The solution in the parallelepiped is valid for all canisters that are not too close to the repository edges. The total temperature field is calculated for the KBS-3 case. The temperature field is calculated using a heat release that is valid for the first 10 000 years after deposition. The temperature field is shown in 23 figures in order to illustrate different aspects of the complex thermal process

Evaluation of Antioxidant Activity from Different Plant Parts of Senduduk Herb: Extraction Conditions Optimization of Selected Plant Part

Directory of Open Access Journals (Sweden)

Kamaludin Nor Helya Iman

2017-01-01

Full Text Available This work reports a study on evaluation of antioxidant properties from flower of Senduduk herb. Natural occurring antioxidant was mostly preferred due to their little or no toxicity compared to the synthetic antioxidants which posses carcinogenic effects. Extraction was done on selected plant parts of Sendududk herb including leaves, stem, flower and berry parts to evaluate their antioxidant potentiality. Flower part of Sendudk herb extracted using acetonic solvent promotes highest antioxidant activity which is 93.97 ± 1.38 % as compared to leaves (92.20 ± 0.20 %, stem (47.94 ± 1.42% and berry (92.88 ± 0.63% using the same extracting solvent. Thus, Senduduk flower was chosen to be continued with screening and optimization process. Single factor experiment using the one factor at a time (OFAT method was done to study the effect of each extraction parameter that was solid to solvent ratio, temperature and solvent concentration. The extraction condition in each parametric study which results in highest antioxidant activity was used as the middle level of optimization process using Response Surface Methodology (RSM coupled with Central Composite Design (CCD. The optimum condition was at 1:20 solid to solvent ratio, 64.61°C temperature and 80.24% acetone concentration which result in antioxidant activity of 96.53%. The verification of RSM showed that the model used to predict the antioxidant activity was valid and adequate with the experimental parameters.

The Impact of Community for Part-Time Doctoral Students: How Relationships in the Academic Department Affect Student Persistence

Directory of Open Access Journals (Sweden)

Sarah Zahl

2015-08-01

Full Text Available This study examines the ways that part-time Ph.D. students develop community within the academic department and how a sense of community is related to persistence. This study included 12 participants (ten students and two program chairs in two academic departments at one urban research institution. This qualitative study followed a descriptive case study design and provided three levels of data: the institution is the bounded system; the academic departments are the cases; and the participants are embedded cases. Positive relationships with peers and faculty served as a source of encouragement and supported persistence, particularly during challenging semesters and later phases of the doctoral program. However, it was often difficult for the participants to develop and/or maintain relationships, due to limited proximity, limited access to faculty, and changing cohorts. Participants did not consider full-time doctoral students to be part of their community, due to perceived differences between part-time and full-time students. The participants also perceived that faculty catered to full-time students and preferred to conduct research with them rather than part-time students.

Stream Health Sensitivity to Landscape Changes due to Bioenergy Crops Expansion

Science.gov (United States)

Nejadhashemi, A.; Einheuser, M. D.; Woznicki, S. A.

2012-12-01

Global demand for bioenergy has increased due to uncertainty in oil markets, environmental concerns, and expected increases in energy consumption worldwide. To develop a sustainable biofuel production strategy, the adverse environmental impacts of bioenergy crops expansion should be understood. To study the impact of bioenergy crops expansion on stream health, the adaptive neural-fuzzy inference system (ANFIS) was used to predict macroinvertebrate and fish stream health measures. The Hilsenhoff Biotic Index (HBI), Family Index of Biological Integrity (Family IBI), and Number of Ephemeroptera, Plecoptera, and Trichoptera taxa (EPT taxa) were used as macroinvertebrate measures, while the Index of Biological Integrity (IBI) was used for fish. A high-resolution biophysical model built using the Soil and Water Assessment Tool was used to obtain water quantity and quality variables for input into the ANFIS stream health predictive models. Twenty unique crop rotations were developed to examine impacts of bioenergy crops expansion on stream health in the Saginaw Bay basin. Traditional intensive row crops generated more pollution than current landuse conditions, while second-generation biofuel crops associated with less intensive agricultural activities resulted in water quality improvement. All three macroinvertebrate measures were negatively impacted during intensive row crop productions but improvement was predicted when producing perennial crops. However, the expansion of native grass, switchgrass, and miscanthus production resulted in reduced IBI relative to first generation row crops. This study demonstrates that ecosystem complexity requires examination of multiple stream health measures to avoid potential adverse impacts of landuse change on stream health.

European clinical guidelines for Tourette syndrome and other tic disorders. Part IV: deep brain stimulation

DEFF Research Database (Denmark)

Müller-Vahl, Kirsten R; Cath, Danielle C; Cavanna, Andrea E

2011-01-01

Ten years ago deep brain stimulation (DBS) has been introduced as an alternative and promising treatment option for patients suffering from severe Tourette syndrome (TS). It seemed timely to develop a European guideline on DBS by a working group of the European Society for the Study of Tourette......, randomized controlled studies including a larger number of patients are still lacking. Although persistent serious adverse effects (AEs) have hardly been reported, surgery-related (e.g., bleeding, infection) as well as stimulation-related AEs (e.g., sedation, anxiety, altered mood, changes in sexual function......) may occur. At present time, DBS in TS is still in its infancy. Due to both different legality and practical facilities in different European countries these guidelines, therefore, have to be understood as recommendations of experts. However, among the ESSTS working group on DBS in TS there is general...

Telmisartan prevented cognitive decline partly due to PPAR-γ activation

International Nuclear Information System (INIS)

Mogi, Masaki; Li Jianmei; Tsukuda, Kana; Iwanami, Jun; Min, Li-Juan; Sakata, Akiko; Fujita, Teppei; Iwai, Masaru; Horiuchi, Masatsugu

2008-01-01

Telmisartan is a unique angiotensin receptor blocker (ARB) and partial agonist of peroxisome proliferator-activated receptor (PPAR)-γ. Here, we investigated the preventive effect of telmisartan on cognitive decline in Alzheimer disease. In ddY mice, intracerebroventricular injection of Aβ 1-40 significantly attenuated their cognitive function evaluated by shuttle avoidance test. Pretreatment with a non-hypotensive dose of telmisartan significantly inhibited such cognitive decline. Interestingly, co-treatment with GW9662, a PPAR-γ antagonist, partially inhibited this improvement of cognitive decline. Another ARB, losartan, which has less PPAR-γ agonistic effect, also inhibited Aβ-injection-induced cognitive decline; however the effect was smaller than that of telmisartan and was not affected by GW9662. Immunohistochemical staining for Aβ showed the reduced Aβ deposition in telmisartan-treated mice. However, this reduction was not observed in mice co-administered GW9662. These findings suggest that ARB has a preventive effect on cognitive impairment in Alzheimer disease, and telmisartan, with PPAR-γ activation, could exert a stronger effect

Plant injury due to air pollution - similar symptoms. Part I

Energy Technology Data Exchange (ETDEWEB)

Matsuoka, Y

1976-01-01

Many plant diseases cause injuries to leaves which mimic the damage inflicted by air pollution. The relationship between air pollution injuries and those caused by meteorological conditions are discussed. Rice plants often contract akagare which causes reddish-brown spots on leaves similar to the symptoms caused by photochemical oxidants. Spider mites produce leaf damage in kidney beans which mimics the spotting caused by photochemical oxidants. Lace bugs produce minute white spots on azaleas similar to those caused by photochemical oxidants.

4 acute nicotine induced pressor response is in part due

African Journals Online (AJOL)

DR. AMINU

increases in heart rate in both normal and in nicotine treated rats but the increases shows no significant differences. ... pre-eclampsia in pregnant women by reduction of production .... (Hilton, 1965) and events occurring in man stress ... during emotional stress in normotensive and ... mechanism contributing to ischemic left.

High-Resolution Manometry Evaluation of Pressures at the Pharyngo-upper Esophageal Area in Patients with Oropharyngeal Dysphagia Due to Vagal Paralysis.

Science.gov (United States)

Pinna, Bruno Rezende; Herbella, Fernando A M; de Biase, Noemi; Vaiano, Thays C G; Patti, Marco G

2017-10-01

The motility of the pharynx, upper esophageal sphincter (UES), and proximal esophagus in patients with oropharyngeal dysphagia is still not entirely understood. High-resolution manometry (HRM) was recently added to the armamentarium for the study of this area. This study aims to describe HRM findings in patients with vagal paralysis. Sixteen patients (mean age 54 years, 69% females) with oropharyngeal dysphagia due to unilateral vagal paralysis were prospectively studied. All patients underwent HRM. Motility of the UES and at the topography of the velopharynx and epiglottis were recorded. (1) UES relaxation is compromised in a minority of patients, (2) epiglottis pressure does not follow a specific pattern, (3) vellum is hypotonic in half of the patients, (4) dysphagia is related to a low pharyngeal pressure, not to a flow obstruction at the level of the UES, and (5) aspiration is related to low pressures at the level of the UES and epiglottis and higher pressures at the level of the vellum. Pharyngeal motility is significantly impaired in patients with oropharyngeal dysphagia and unilateral vagal paralysis. In half of the cases, UES resting pressure is preserved due to unilateral innervation and relaxation is normal in most patients. Dysphagia therapy in these patients must be directed toward improvement in the oropharyngeal motility not at the UES.

Process development for green part printing using binder jetting additive manufacturing

Science.gov (United States)

Miyanaji, Hadi; Orth, Morgan; Akbar, Junaid Muhammad; Yang, Li

2018-05-01

Originally developed decades ago, the binder jetting additive manufacturing (BJ-AM) process possesses various advantages compared to other additive manufacturing (AM) technologies such as broad material compatibility and technological expandability. However, the adoption of BJ-AM has been limited by the lack of knowledge with the fundamental understanding of the process principles and characteristics, as well as the relatively few systematic design guideline that are available. In this work, the process design considerations for BJ-AM in green part fabrication were discussed in detail in order to provide a comprehensive perspective of the design for additive manufacturing for the process. Various process factors, including binder saturation, in-process drying, powder spreading, powder feedstock characteristics, binder characteristics and post-process curing, could significantly affect the printing quality of the green parts such as geometrical accuracy and part integrity. For powder feedstock with low flowability, even though process parameters could be optimized to partially offset the printing feasibility issue, the qualities of the green parts will be intrinsically limited due to the existence of large internal voids that are inaccessible to the binder. In addition, during the process development, the balanced combination between the saturation level and in-process drying is of critical importance in the quality control of the green parts.

Dimensional Metrology of Non-rigid Parts Without Specialized Inspection Fixtures =

Science.gov (United States)

Sabri, Vahid

Quality control is an important factor for manufacturing companies looking to prosper in an era of globalization, market pressures and technological advances. Functionality and product quality cannot be guaranteed without this important aspect. Manufactured parts have deviations from their nominal (CAD) shape caused by the manufacturing process. Thus, geometric inspection is a very important element in the quality control of mechanical parts. We will focus here on the geometric inspection of non-rigid (flexible) parts which are widely used in the aeronautic and automotive industries. Non-rigid parts can have different forms in a free-state condition compared with their nominal models due to residual stress and gravity loads. To solve this problem, dedicated inspection fixtures are generally used in industry to compensate for the displacement of such parts for simulating the use state in order to perform geometric inspections. These fixtures and the installation and inspection processes are expensive and time-consuming. Our aim in this thesis is therefore to develop an inspection method which eliminates the need for specialized fixtures. This is done by acquiring a point cloud from the part in a free-state condition using a contactless measuring device such as optical scanning and comparing it with the CAD model for the deviation identification. Using a non-rigid registration method and finite element analysis, we numerically inspect the profile of a non-rigid part. To do so, a simulated displacement is performed using an improved definition of displacement boundary conditions for simulating unfixed parts. In addition, we propose a numerical method for dimensional metrology of non-rigid parts in a free-state condition based on the arc length measurement by calculating the geodesic distance using the Fast Marching Method (FMM). In this thesis, we apply our developed methods on industrial non-rigid parts with free-form surfaces simulated with different types of

Controlled parts management

International Nuclear Information System (INIS)

Boyle, C.M.; Hidalgo, S.P.; Martinez, B.J.

2004-01-01

The Controlled Parts Management (CPM) system is based on industry standard practices for managing inventory. CPM is designed to record the movement of any type of inventory in a defined region referred to as an Account or SubAccount. The system is used to track the receiving, processing, storing and transfer of inventory parts. CPM provides information on parts, quantity and the exact location of the inventory. CPM is a barcode-based-part tracking system currently used to track controlled parts that are used in the R and D and testing of weapons; this tracking helps maintain the part pedigree that is required for certification of a weapon or weapon test. CPM includes bar code data collection software programmed into portable bar code readers for automating physical inventory services and remote transaction capture. CPM interfaces to other Engineering systems and supports a 'material content' of a weapons test through the test Bill of Materials and assignment of a unique inventory part in CPM. Additional functionality includes the ability to group or join parts, logically or physically and temporary or permanent, to represent discrete parts, containers, subassemblies and assemblies, and groupings.

[Part-time medical specialist training; experiences with job-sharing for trainee internists].

Science.gov (United States)

Bevers, K; Nauta, S; Stuyt, P M

2004-02-14

Due to various factors such as social changes, an increasing number of couples with two incomes, and a growing proportion of female doctors, there has been a growing demand for part-time work in recent years. This is also true for resident physicians. Objections such as a discontinuity in care and the decline in the quality of education frequently prevent resident physicians from working part-time. Over the past two years, the University Medical Centre Nijmegen, the Netherlands, has experimented with job-sharing on clinical wards for resident physicians in internal medicine. This approach works well in practice, as long as a number of conditions, including the proper transfer of medical information and good communication, are satisfied. Job-sharing is one means of satisfying the growing demand for part-time work among resident physicians and specialists.

10 CFR Appendix A to Part 20 - Assigned Protection Factors for Respirators a

Science.gov (United States)

2010-01-01

... internal dose due to inhalation may, in addition, present external exposure hazards at higher... 10 Energy 1 2010-01-01 2010-01-01 false Assigned Protection Factors for Respirators a A Appendix A..., App. A Appendix A to Part 20—Assigned Protection Factors for Respirators a Operating mode Assigned...

Hemolytic disease of the fetus and newborn with late-onset anemia due to anti-M: a case report and review of the Japanese literature.

Science.gov (United States)

Yasuda, Hiroyasu; Ohto, Hitoshi; Nollet, Kenneth E; Kawabata, Kinuyo; Saito, Shunnichi; Yagi, Yoshihito; Negishi, Yutaka; Ishida, Atsushi

2014-01-01

Hemolytic disease of the fetus and newborn (HDFN) attributed to M/N-incompatibility varies from asymptomatic to lethally hydropic. Case reports are rare, and the clinical significance of anti-M is not completely understood. A challenging case of HDFN due to anti-M prompted an investigation of the Japanese literature, in order to characterize the clinical spectrum of M/N-incompatibility pregnancies in Japan and report results to English-language readers. Japanese reports of HDFN attributed to M/N incompatibility were compiled. Abstracted data include maternal antibody titers at delivery, fetal direct antiglobulin test, hemoglobin, total bilirubin, reticulocyte count at birth, and therapeutic interventions. We investigated characteristics of HDFN due to M/N-incompatible pregnancies in Japan after encountering a case of severe HDFN along with late-onset anemia in an infant born to a woman carrying IgG anti-M with a titer of 1. In total, thirty-three babies with HDFN due to anti-M and one due to anti-N have been reported in Japan since 1975. The median maternal antibody titer was 64 at delivery and was 16 or less in 10 of 34 women (29%). Five of 34 babies (15%) were stillborn or died as neonates. Twenty-one of 29 survivors (72%) had severe hemolytic anemia and/or hydrops fetalis. The reticulocyte count of neonates with anemia stayed below the reference interval. Sixteen (55%) developed late-onset anemia and 14 (48%) were transfused with M-negative RBCs. Significant positive correlation (P hemolytic anemia and/or hydrops fetalis. Low reticulocyte count in neonates with late-onset anemia is consistent with suppressed erythropoiesis due to anti-M. © 2013.

Generalized requirements and decompositions for the design of test parts for micro additive manufacturing research

DEFF Research Database (Denmark)

Thompson, Mary Kathryn; Clemmensen, Line Katrine Harder

2015-01-01

The design of experimental test parts to characterize micro additive manufacturing (AM) processes is challenging due to the influence of the manufacturing and metrology processes. This work builds on the lessons learned from a case study in the literature to derive generalized requirements and high...... level decompositions for the design of test parts and the design of experiments to characterize micro additive manufacturing processes. While the test parts and the experiments described are still work in progress, the generic requirements derived from them can serve as a starting point for the design...... of other micro additive manufacturing related studies and their decompositions can help structure future work....

Effect of the barrier properties on the surface part of the barrier discharge

International Nuclear Information System (INIS)

Sokolova, M.V.; Zhukov, S.V.

1998-01-01

The effect of barrier characteristics on the discharge processes in a barrier discharge was investigated, main attention being paid to the amount and distribution of the charge left on the barrier surface by the volume discharge in the main air gap. The measurements show that the main part of the gap charge is due to the volume part of the discharge. The measured values of the surface charge significantly increase with the voltage applied and with the length of the gas gap, while the dimensions of the charge spot and the distribution of charge density are determined by the barrier properties. (J.U.)

Metal Contamination In Plants Due To Tannery Effluent

Directory of Open Access Journals (Sweden)

Md. Farhad Ali

2015-08-01

Full Text Available Abstract This paper analyzes the determination of heavy metals named Chromium Lead and Cadmium deposited in soil as well as in the plants and vegetables due to the tanning industries of the area of Hazaribagh Dhaka. The tanneries discharge untreated tannery effluents which get mixed with the soil water of rivers and canals in this area. The determination of metals was performed for the soil that was collected from the land adjacent to the canals which bear untreated tannery effluents. The soil is affected with the untreated effluents through the deposition of heavy metals. The metals were furthers deposited into the plants and vegetables grown on that soil. The roots stems and leaves of the plants of Jute Corchorus capsularis and Spinach Basella alba grown on that soil were analyzed for determining these metals. Extreme amount of chromium was found for plants and again Lead Cadmium were found in higher amount in these parts of the two plants. These two plants are taken as a popular vegetables extensively. In case of soil the amount of Chromium Lead and Cadmium were analyzed as 87 mgL 0.131 mgL and 0.190 mgL respectively. For the roots stems and leaves of Jute Corchorus capsularis the average values are 115.62 mgL for Chromium 11.25 mgL for Lead and 2.27 mgL for Cadmium respectively. Again in case of Spinach Basella alba 124.42 mgL was found for Chromium 7.38 mgL for lead and 2.97 mgL for Cadmium as average values for these parts of the two trees. All the observed values of metals of Chromium Lead and Cadmium are higher than the permissible and specially for Chromium the amount is extremely higher.

Fatigue Analysis of Rotating Parts. A Case Study for a Belt Driven Pulley

Science.gov (United States)

Sandu, Ionela; Tabacu, Stefan; Ducu, Catalin

2017-10-01

The present study is focused on the life estimation of a rotating part as a component of an engine assembly namely the pulley of the coolant pump. The goal of the paper is to develop a model, supported by numerical analysis, capable to predict the lifetime of the part. Starting from functional drawing, CAD Model and technical specifications of the part a numerical model was developed. MATLAB code was used to develop a tool to apply the load over the selected area. The numerical analysis was performed in two steps. The first simulation concerned the inertia relief due to rotational motion about the shaft (of the pump). Results from this simulation were saved and the stress - strain state used as initial conditions for the analysis with the load applied. The lifetime of a good part was estimated. A defect was created in order to investigate the influence over the working requirements. It was found that there is little influence with respect to the prescribed lifetime.

In Situ Manufacturing is a Necessary Part of Any Planetary Architecture

Science.gov (United States)

Edmunson, Jennifer E.; McLemore, Carole A.

2012-01-01

The key to any sustainable presence in space is the ability to manufacture necessary tools, parts, structures, spares, etc. in situ and on demand. Cost, volume, and up-mass constraints prohibit launching everything needed for long-duration or long-distance missions from Earth, including spare parts and replacement systems. There are many benefits to building items as-needed in situ using computer aided drafting (CAD) models and additive manufacturing technology: (1) Cost, up-mass, and volume savings for launch due to the ability to manufacture specific parts when needed. (2) CAD models can be generated on Earth and transmitted to the station or spacecraft, or they can be designed in situ for any task. Thus, multiple people in many locations can work on a single problem. (3) Items can be produced that will enhance the safety of crew and vehicles (e.g., latches or guards). (4) Items can be produced on-demand in a small amount of time (i.e., hours or days) compared to traditional manufacturing methods and, therefore, would not require the lengthy amount of time needed to machine the part from a solid block of material nor the wait time required if the part had to be launched from Earth. (5) Used and obsolete parts can be recycled into powder or wire feedstock for use in later manufacturing. (6) Ultimately, the ability to produce items as-needed will reduce mission risk, as one will have everything they need to fix a broken system or fashion a new part making it available on a more timely basis.

Microlayer source of oxygenated volatile organic compounds in the summertime marine Arctic boundary layer

OpenAIRE

Mungall, Emma L.; Abbatt, Jonathan P. D.; Wentzell, Jeremy J. B.; Lee, Alex K. Y.; Thomas, Jennie L.; Blais, Marjolaine; Gosselin, Michel; Miller, Lisa A.; Papakyriakou, Tim; Willis, Megan D.; Liggio, John

2017-01-01

A biogeochemical connection between the atmosphere and the ocean is demonstrated whereby a marine source of oxygenated volatile organic compounds is identified. Compounds of this type are involved in the formation of secondary organic aerosol, which remains one of the most poorly understood components of Earth’s climate system due in part to the diverse sources of its volatile organic compound precursors. This is especially the case for marine environments, where there are more oxygenated vol...

The many perspectives on the concept of boutique hotels

OpenAIRE

Ricardo Barbosa Angeli; Ricardo de Gil Torres; Ricardo Frota de Albuquerque Maranhão

2012-01-01

The hospitality industry needs from time to time to renovate its installations. There is no better moment for a marketing repositioning. This paper presents an exploratory study on how the boutique hotel concept is understood by researchers from different countries. Due to independent hotels agility in implementing innovations, it was considered the possibility of part of this segment adopting the boutique model to improve competitiveness against hotel chains. It was found that there is no si...

Coastal pollution emergency plan. Part I

Energy Technology Data Exchange (ETDEWEB)

Semanov, G.; Volkov, V.; Somkin, V.; Iljushenko-Krylov, D.

1997-12-31

A higher degree of ecological safety in ship traffic depends on onboard measures as well as reception facilities on shore, treatment of ship generated wastes and preparedness for combating emergency oil spills. The problem is particularly acute in the North Sea Route (NSR) due to high vulnerability of the Arctic ecosystems, low rates of natural degradation of oil, absence of forward coastal infrastructure, low efficiency of oil combating means in ice conditions and severe climatic conditions. Oil spills in the NSR are likely to occur as the offshore production and transportation of oil increase. Therefore a regional Oil Spill Contingency Plan (OSCP) is being constructed and developed on 3 levels: 1) Development of concept, definition of response organisations and their technical ability (Part I). 2) Collection and analysis of information, development of scenarios of probable oil spills, clearing of the funding mechanism and basis for additional outside co-operation from other Russian regions and circumpolar countries (part II). 3) Development of NSR OSCP (part III). The present report (part I) provides the plan concept, rescue organisations and data on types and amounts of the oil spill combating technical means and of the floating facilities available in the NSR or it`s vicinity. The concept takes into account subdivision of the Route, interaction and links between responsible organisations, realities of the Russian Arctic such as transport, communications, energy, labour resources etc. and requirements of the IMO and of the International Convention OPRC 90. According to Russian legislation implementation of combating operations at sea is the responsibility of the Maritime Pollution Control and Salvage Administration that consists of a Central Administration and basin emergency divisions situated in Murmansk and Nahodka. The body is responsible for carrying out cleaning operations at sea from installations and may be assisted by resources and means of the co

Trends in fatalities due to poisoning at Umtata General Hospital, Mthatha (1993–2005

Directory of Open Access Journals (Sweden)

Banwari L. Meel

2009-08-01

Full Text Available Poisoning is a common method of committing suicide in this region of South Africa. Females generally ingest poisons but it is increasingly becoming common in males too. This is a record review of autopsies carried out at the Umtata (Mthatha General Hospital mortuary, which forms part of the teaching hospital of the Walter Sisulu University Medical School. There were 10 230 unnatural deaths between 1993 and 2005. Of these deaths, 161 (1.6% were deaths due to poisoning. There was a marked increase in death by poisoning from 2.5% in 1993 to 13.7% in 2004. The highest percentage (17.4% of poison-related deaths was in 2001, and the lowest (2.5% was in 1993 and 1994. About two-thirds of victims (66% were males, and more than half of the victims (51.5% were in the 11 to 30 age group. There is an increasing trend in fatalities due to poisoning at Umtata General Hospital, Mthatha.

Design of a Loose Part Monitoring System Test-bed using CompactRIO

Energy Technology Data Exchange (ETDEWEB)

Kim, Min-seok; Lee, Kwang-Dae; Lee, Eui-Jong [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

A loose part monitoring system (LPMS) is included in the NSSS integrity monitoring system (NIMS), which serves to detect loose parts in reactor coolant systems (RCS). LPMSs at Nuclear Power Plants (NPPs) in Korea follow the ASME OM standard and acquire data from 18 sensors simultaneously. Data acquisition requires a sampling rate of more than 50KHz along with a 12bit A/D converter. Existing LPMS equipment is composed of several different platforms, such as a digital signal processor (DSP), a field-programmable gate array (FPGA), a micro control unit (MCU), and electric circuit cards. These systems have vulnerabilities, such as discontinuance due to aging and incompatibility issues between different pieces of equipment. This paper suggests CompactRIO as a new platform. We devised a Test-bed using CompactRIO and demonstrate that the proposed method meets the criteria required by the standard. The LPMS provides an alert when an impact event occurs and provides information with which to analyze the location, energy, and mass of the loose parts. LPMSs in NPPs in Korea operate on a variety of platforms. Thus, these systems are vulnerable to discontinuances due to aging and incompatibilities arising from the use of different type of equipment. In order to solve these problems, this paper suggests CompactRIO as a new platform. It is a rugged, reconfigurable, high-performance industrial embedded system. The results of performance tests meet the criteria set by the current standard.

An Innovative Three Part Prosthetic Rehabilitation of Class-1V Facial Defect

OpenAIRE

Balu, K.

2013-01-01

Loss of maxillo facial structures due to neoplasm, trauma and accidents gives inconsolable mental, physical and psychological agony to a person’s dignified life in his living society. Surgical reconstruction was not feasible for all cases and certain cases needs prosthetic rehabilitation. In this clinical case report, an innovative, simple three part maxillo orbital prosthesis fabrication using magnets was explained.

Kinetics of contraction-induced GLUT4 translocation in skeletal muscle fibers from living mice

DEFF Research Database (Denmark)

Lauritzen, Hans Peter M. Mortensen; Galbo, Henrik; Toyoda, Taro

2010-01-01

Exercise is an important strategy for the treatment of type 2 diabetes. This is due in part to an increase in glucose transport that occurs in the working skeletal muscles. Glucose transport is regulated by GLUT4 translocation in muscle, but the molecular machinery mediating this process is poorl...... understood. The purpose of this study was to 1) use a novel imaging system to elucidate the kinetics of contraction-induced GLUT4 translocation in skeletal muscle and 2) determine the function of AMP-activated protein kinase alpha2 (AMPKalpha2) in this process.......Exercise is an important strategy for the treatment of type 2 diabetes. This is due in part to an increase in glucose transport that occurs in the working skeletal muscles. Glucose transport is regulated by GLUT4 translocation in muscle, but the molecular machinery mediating this process is poorly...

Implementing statistical equating for MRCP(UK) Parts 1 and 2.

Science.gov (United States)

McManus, I C; Chis, Liliana; Fox, Ray; Waller, Derek; Tang, Peter

2014-09-26

The MRCP(UK) exam, in 2008 and 2010, changed the standard-setting of its Part 1 and Part 2 examinations from a hybrid Angoff/Hofstee method to statistical equating using Item Response Theory, the reference group being UK graduates. The present paper considers the implementation of the change, the question of whether the pass rate increased amongst non-UK candidates, any possible role of Differential Item Functioning (DIF), and changes in examination predictive validity after the change. Analysis of data of MRCP(UK) Part 1 exam from 2003 to 2013 and Part 2 exam from 2005 to 2013. Inspection suggested that Part 1 pass rates were stable after the introduction of statistical equating, but showed greater annual variation probably due to stronger candidates taking the examination earlier. Pass rates seemed to have increased in non-UK graduates after equating was introduced, but was not associated with any changes in DIF after statistical equating. Statistical modelling of the pass rates for non-UK graduates found that pass rates, in both Part 1 and Part 2, were increasing year on year, with the changes probably beginning before the introduction of equating. The predictive validity of Part 1 for Part 2 was higher with statistical equating than with the previous hybrid Angoff/Hofstee method, confirming the utility of IRT-based statistical equating. Statistical equating was successfully introduced into the MRCP(UK) Part 1 and Part 2 written examinations, resulting in higher predictive validity than the previous Angoff/Hofstee standard setting. Concerns about an artefactual increase in pass rates for non-UK candidates after equating were shown not to be well-founded. Most likely the changes resulted from a genuine increase in candidate ability, albeit for reasons which remain unclear, coupled with a cognitive illusion giving the impression of a step-change immediately after equating began. Statistical equating provides a robust standard-setting method, with a better

Experimental investigation on streaming due to a gap between blanket modules in ITER

International Nuclear Information System (INIS)

Konno, Chikara; Maekawa, Fujio; Oyama, Yukio; Uno, Yoshitomo; Kasugai, Yoshimi; Maekawa, Hiroshi; Ikeda, Yujiro; Wada, Masayuki

2000-01-01

A gap streaming experiment was performed by using a D-T neutron source at FNS/JAERI as the ITER/EDA R and D Task T-218, in order to examine the streaming effects due to gap between shield blanket modules in ITER. The experiment had three phases. The first one defined neutron source characteristics (Source Characterization Experiment), the second (Experiment-l ) aimed at shield for welding part between shield blanket and back plate and the third (Experiment-2) focused on the influence that the gap between shield blanket modules would have on superconducting magnet. The effects of gap streaming were examined in detail experimentally. (author)

[Dehydration due to "mouth broken"].

Science.gov (United States)

Meijler, D P M; van Mossevelde, P W J; van Beek, R H T

2012-09-01

Two children were admitted to a medical centre due to dehydration after an oral injury and the extraction of a tooth. One child complained of "mouth broken". Dehydration is the most common water-electrolyte imbalance in children. Babies and young children are prone to dehydration due to their relatively large body surface area, the high percentage extracellular fluid, and the limited ability of the kidneys to conserve water. After the removal ofa tooth, after an oral trauma or in case of oral discomfort, a child is at greater risk of dehydration by reduced fluid and food intake due to oral pain and/or discomfort and anxiety to drink. In those cases, extra attention needs to be devoted to the intake of fluids.

Geochemistry of Groundwater: An Overview of Sporadic Fluoride and Nitrate Contamination in Parts of Yamuna River Basin, India

Directory of Open Access Journals (Sweden)

Shadab Khurshid

2013-06-01

Full Text Available The chemical characteristics of groundwater in parts of Yamuna river sub-basin utilized for both irrigation and domestic purposes were investigated by analyzing samples collected from the western part of Yamuna basin. It is observed that majority of the ground water samples are saline due to the presence of more clayey material with low permeability leading to longer residence time. Occurrence and distribution of fluoride and nitrate in groundwater on either bank of Yamuna river are studied and high concentrations of F and NO3 exceeding standard limits of various organization were observed at places suggesting their non-solubility for drinking purposes. Low concentration of nitrate is due to denitrification. Fluoride correlates positively with HCO3 and negatively with Ca. Discharge of untreated industrial effluents in unlined drains, dumping of solid wastes in open field and increased utilization of nitrogenous and phosphate fertilizers are responsible for the degradation of groundwater quality in parts of Yamuna basin.

Study on the import dues system

Energy Technology Data Exchange (ETDEWEB)

Woo, Sung Keun [LG-Caltex Oil Co., Seoul (Korea)

2000-04-01

Since October 1979, Korea had implemented a petroleum project fund dues system to actively prepare for unstable international petroleum condition. However, as the size of operating a petroleum project fund was bigger and the influence of government on this fund became powerful, it was inserted in the government tax revenues as a {sup S}pecial account for energy and resource project{sup i}n March 1994 and its name was changed to import dues. In this study, it discusses the facts of import dues system, which exists only in Korea, and its policy directions since this system has been reviewed due to the economic development, liberalization of petroleum industry and inequity between alternative energy sources. 4 tabs.

A verified and efficient approach towards fatigue validation of safety parts

Energy Technology Data Exchange (ETDEWEB)

Weihe, Stefan; Weigel, Nicolas [Daimler AG, Stuttgart (Germany); Dressler, Klaus; Speckert, Michael; Feth, Sascha

2011-07-01

In the automotive industry, safety parts must be designed according to the state of the art of science and technology such that they do not fail as long as the vehicle is used according to its purpose and misuse of the vehicle does not exceed a reasonably expectable degree. Due to scatter in customer loads and component properties, fatigue validation needs to be based on statistical methods. Mathematically sound methods are devised in order to make the validation process as efficient as possible. They allow considering all test results, including censored test data (e.g. tests suspended due to premature failure of components which are not under consideration). Furthermore, these methods permit adapting the success run criterion successively to the testing process. (orig.)

Climate change due to greenhouse effects in China as simulated by a regional climate model

Energy Technology Data Exchange (ETDEWEB)

Gao, X.J.; Zhao, Z.C.; Ding, Y.H.; Huang, R.H.; Giorgi, F. [National Climate Centre, Beijing (China)

2001-07-01

Impacts of greenhouse effects (2 x CO{sub 2}) upon climate change over China as simulated by a regional climate model over China (RegCM / China) have been investigated. The model was based on RegCM2 and was nested to a global coupled ocean-atmosphere model (CSIRO R21L9 AOGCM model). Results of the control run (1 x CO{sub 2}) indicated that simulations of surface air temperature and precipitation in China by RegCM are much better than that by the global coupled model because of a higher resolution. Results of sensitive experiment by RegCM with 2 x CO{sub 2} showed that the surface air temperature over China might increase remarkably due to greenhouse effect, especially in winter season and in North China. Precipitation might also increase in most parts of China due to the CO{sub 2} doubling.

Heavy density concrete for nuclear radiation shielding and power stations: [Part]2

International Nuclear Information System (INIS)

Singha Roy, P.K.

1987-01-01

This article is the second part of the paper entitled 'Heavy density concrete for nuclear radiation shielding and power stations'. In this part, some of the important properties of heavy density concrete are discussed. They include density, water retentivity, air content, permeability with special reference to concrete mixes used in India's nuclear power reactors. All these properties are affected to various extents by heating. Indian shield concrete is rarely subjected to temperatures above 60degC during its life, because of thermal shield protection. During placement, the maximum anticipated rise in temperature due to heat of hydration is restricted to around 45degC by chilling, if necessary to reduce shrinkage stresses and cracks. (M.G.B.)

Boxing-related head injuries.

Science.gov (United States)

Jayarao, Mayur; Chin, Lawrence S; Cantu, Robert C

2010-10-01

Fatalities in boxing are most often due to traumatic brain injury that occurs in the ring. In the past 30 years, significant improvements in ringside and medical equipment, safety, and regulations have resulted in a dramatic reduction in the fatality rate. Nonetheless, the rate of boxing-related head injuries, particularly concussions, remains unknown, due in large part to its variability in clinical presentation. Furthermore, the significance of repeat concussions sustained when boxing is just now being understood. In this article, we identify the clinical manifestations, pathophysiology, and management of boxing-related head injuries, and discuss preventive strategies to reduce head injuries sustained by boxers.

‘Una ventanita’: Vida cotidiana de las dueñas de casa y agencia de las máquinas tragamonedas en Chile

Directory of Open Access Journals (Sweden)

Francisco Olivos Ravé

2012-07-01

Full Text Available Este artículo intenta dar respuesta de forma etnográfica a la pregunta de cuál es el sentido que ocupan las máquinas tragamonedas y la agencia que estas tienen sobre la vida cotidiana de las dueñas de casa de un barrio de clase media baja en la comuna de San Bernardo, Santiago. Se descubre que el juego en las máquinas tragamonedas no constituye un momento extraordinario, sino que es parte de la rutina, pero a la vez permite una ruptura de la simultaneidad del tiempo libre con el de las labores del hogar que caracteriza a otras actividades como ver televisión. Sin embargo, gracias al enfoque de la teoría del actor red es posible observar que la agencia de las máquinas tragamonedas canaliza el escape de lo que significa la casa, es decir, de las responsabilidades y de los problemas familiares. Se genera, por otra parte, un encuentro de las dueñas de casa con su self. Asimismo, la agencia de las máquinas tragamonedas desencadena controversias en la familia volviéndola parte de la red que se forma en torno el juego. Finalmente, se plantea que las decisiones que se tomen en torno a la legislación sobre el juego deben tener en cuenta una traducción que permita comprender la lógica del juego en la vida cotidiana de las dueñas de casa y de los jugadores en general.

Stochastic model of forecasting spare parts demand

Directory of Open Access Journals (Sweden)

Ivan S. Milojević

2012-01-01

spare part has its own failure intensity; therefore, it is necessary to conduct a complete procedure for each part. If the average number of components of a complex asset were about 5000, along with the existence of a large number of resources, the forecasting by the trend extrapolating would practically require the newest information technologies. However, the analysis shows that in most cases 80-90% of component parts have a longer life than the asset itself. In addition, it is shown that during the life of the asset, these components do not fail, and that 10-15% of component parts have only rare failures (post optimal analysis of spare parts normative or do not show any failing tendency meaning that failures are random. This procedure remains to be applied to 2-4% of component parts. It does not present a significant problem due to the process automation. This model enables us to determine the parts to which the trend extrapolation procedure should be applied. Forecast is obtained by the use of the second model to existing data. The trend extrapolation forecast or any other kind of forecast does not need to be done for those spare parts for which the long time forecast is close to zero. Provision of spare parts for the maintenance system considering the range, quantity, time and place is crucial for successful functioning of the maintenance system and ultimately for the accuracy of material resources. On the other hand, stocks of spare parts are costly and required to be reduced. Costs need to be minimized while ensuring the successful functioning of the maintenance system.

How do macro-level contexts and policies affect the employment chances of chronically ill and disabled people? Part I: The impact of recession and deindustrialization.

Science.gov (United States)

Holland, Paula; Burström, Bo; Whitehead, Margaret; Diderichsen, Finn; Dahl, Espen; Barr, Ben; Nylén, Lotta; Chen, Wen-Hao; Thielen, Karsten; van der Wel, Kjetil A; Clayton, Stephen; Uppal, Sharanjit

2011-01-01

Low employment rates of chronically ill and disabled people are of serious concern. Being out of work increases the risk of poverty and social exclusion, which may further damage the health of these groups, exacerbating health inequalities. Macro-level policies have a potentially tremendous impact on their employment chances, and these influences urgently need to be understood as the current economic crisis intensifies. In Part I of this two-part study, the authors examine employment trends for people who report a chronic illness or disability, by gender and educational level, in Canada, Denmark, Norway, Sweden, and the United Kingdom in the context of economic booms and busts and deindustrialization. People with the double burden of chronic illness and low education have become increasingly marginalized from the labor market. Deindustrialization may have played a part in this process. In addition, periods of high unemployment have sparked a downward trend in employment for already marginalized groups who did not feel the benefits when the economy improved. Norway and Sweden have been better able to protect the employment of these groups than the United Kingdom and Canada. These contextual differences suggest that other macro-level factors, such as active and passive labor market polices, may be important, as examined in part II.

Changes in radiocesium contamination from Fukushima in foliar parts of 10 common tree species in Japan between 2011 and 2013

International Nuclear Information System (INIS)

Yoshihara, Toshihiro; Matsumura, Hideyuki; Tsuzaki, Masaharu; Wakamatsu, Takashi; Kobayashi, Takuya; Hashida, Shin-nosuke; Nagaoka, Toru; Goto, Fumiyuki

2014-01-01

Yearly changes in radiocesium ( 137 Cs) contamination, primarily due to the Fukushima accident of March 2011, were observed in the foliar parts of 10 common woody species in Japan (Chamaecyparis obtusa, Cedrus deodara, Pinus densiflora, Cryptomeria japonica, Phyllostachys pubescens, Cinnamomum camphora, Metasequoia glyptostroboides, Prunus × yedoensis, Acer buergerianum, and Aesculus hippocastanum). The samples were obtained from Abiko (approximately 200 km SSW of the Fukushima Dai-ichi Nuclear Power Plant) during each growing season between 2011 and 2013, and the foliar parts were examined based on their year of expansion and location in each trees. The radiocesium concentrations generally decreased with time; however, the concentrations and rates of decrease varied among species, age of foliar parts, and locations. The radiocesium concentrations in the 2012 current-year foliar parts were 29%–220% of those from 2011, while those from 2013 fell to between 14% and 42% of the 2011 values. The net decontamination in the foliage was higher in evergreen species than in deciduous species. The radiocesium concentrations in the upper foliar parts were higher than those in the lower parts particularly in C. japonica. In addition, the radiocesium concentrations were higher in the current-year foliar parts than in the 1-year-old foliar parts, particularly in 2013. Thus, the influence of the direct deposition of the fallout was reduced with time, and the translocation ability of radiocesium from old to new tissues became more influential. Similar to the behavior of potassium in trees, Cs redistribution probably occurred primarily due to internal nutrient translocation mechanisms. - Highlights: • 137 Cs concentrations of foliar parts expanded in 2013 was 14–42% of those in 2011. • The rates of decrease varied with the species, sampling part, and position. • Newly expanded foliar parts contain higher 137 Cs concentrations than older parts. • 137 Cs translocation

Microstructural examination by TEM of WC/Co composites prepared by conventional and Microwave processes

International Nuclear Information System (INIS)

Agrawal, D.; Cheng, J.; Papworth, A.J.; Jain, H.; Williams, D.B.

2001-01-01

Recently, significant developments and advances have taken place in the field of microwave processing of ceramics, composites and metals. Microwave sintering technology of WC/Co based hard metal parts has been now developed for commercial products. Microwave processed WC/Co parts reportedly have exhibited superior performance over standard parts. Additionally, the microwave process requires only one tenth of the total cycle time employed in a conventional process. Laboratory corrosion and impact resistance tests have proved that microwave processed WC/Co parts are several times more resistant than the conventional parts of the same composition. The scanning transmission electron microscopic (STEM) examination conducted an conventionally and microwave sintered WC/Co samples exhibited remarkable difference in the chemistry of cobalt binder phase. It is understood that the superior mechanical properties of microwave sintered part are due to the pure cobalt phase present at the grain boundary of WC grains, while the conventionally sintered part showed there was substantial inter-alloying of Co with tungsten. (author)

Cookery, diet and district nursing in late nineteenth-century London.

Science.gov (United States)

Akiyama, Yuriko

2009-03-01

While health education in late nineteenth-century Britain could be beneficial for every household, it was particularly so where district nurses understood family circumstances and adapted knowledge to individual needs. During this period sick room cookery training and lectures on hygiene and dietetics became standard for nurses--especially following the reforms of Matron Eva Lückes at the London Hospital. Because understanding about health was not widespread in society, due to the living conditions and poverty of so many patients, and because doctors had few opportunities to convey such knowledge, the active support of nurses in the community proved to be essential for translating professional knowledge into words commonly understood. By demonstrating cooking and other health-related skills in the homes of the poor, nurses played an important part in improving the nation's health.

47 CFR 27.1133 - Protection of Part 74 and Part 78 operations.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Protection of Part 74 and Part 78 operations... MHz Bands Protection of Incumbent Operations § 27.1133 Protection of Part 74 and Part 78 operations... stations with those licensees. In the event that mutually satisfactory coordination agreements cannot be...

History and challenges of barium titanate: Part I

Directory of Open Access Journals (Sweden)

Vijatović M.M.

2008-01-01

Full Text Available Barium titanate is the first ferroelectric ceramics and a good candidate for a variety of applications due to its excellent dielectric, ferroelectric and piezoelectric properties. Barium titanate is a member of a large family of compounds with the general formula ABO3 called perovskites. Barium titanate can be prepared using different methods. The synthesis method depends on the desired characteristics for the end application. The used method has a significant influence on the structure and properties of barium titanate materials. In this review paper, Part I contains a study of the BaTiO3 structure and frequently used synthesis methods.

Heat transfer in porous medium embedded with vertical plate: Non-equilibrium approach - Part B

Energy Technology Data Exchange (ETDEWEB)

Quadir, G. A., E-mail: Irfan-magami@Rediffmail.com, E-mail: gaquadir@gmail.com [School of Mechatronic Engineering, University Malaysia Perlis, Pauh Putra, 02600 Arau, Perlis (Malaysia); Badruddin, Irfan Anjum [Dept. of Mechanical Engineering, University of Malaya, Kuala Lumpur, 50603 (Malaysia)

2016-06-08

This work is continuation of the paper Part A. Due to large number of results, the paper is divided into two section with section-A (Part A) discussing the effect of various parameters such as heat transfer coefficient parameter, thermal conductivity ratio etc. on streamlines and isothermal lines. Section-B highlights the heat transfer characteristics in terms of Nusselt number The Darcy model is employed to simulate the flow inside the medium. It is assumed that the heat transfer takes place by convection and radiation. The governing partial differential equations are converted into non-dimensional form and solved numerically using finite element method.

On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing

International Nuclear Information System (INIS)

Haberland, Christoph; Elahinia, Mohammad; Walker, Jason M; Meier, Horst; Frenzel, Jan

2014-01-01

Additive manufacturing provides an attractive processing method for nickel–titanium (NiTi) shape memory and pseudoelastic parts. In this paper, we show how the additive manufacturing process affects structural and functional properties of additively manufactured NiTi and how the process parameter set-up can be optimized to produce high quality NiTi parts and components. Comparisons of shape recovery due to shape memory and pseudoelasticity in additively manufactured and commercial NiTi exhibit promising potential for this innovative processing method. (paper)

CO2 uptake potential due to concrete carbonation: A case study

Directory of Open Access Journals (Sweden)

Edna Possan

2017-06-01

Full Text Available The cement manufacturing process accounts for about 5% CO2 (carbon dioxide released into the atmosphere. However, during its life cycle, concrete may capture CO2 through carbonation, in order to, partially, offset the impact of its production. Thus, this paper aims at studying the CO2 uptake potential of the Itaipu Dam due to concrete carbonation of such material. So, 155 cores were extracted from the concrete dam in different points to measure carbonation depth. In order to evaluate its influence on carbonation, the measurement of internal moisture distribution in concrete was also carried out. The results have shown that carbonation takes part of the whole dam area, indicating CO2 uptake potential. Up to the present moment, 13,384 tons of CO2 have been absorbed by concrete carbonation of the Itaipu Dam.

Corrections to the rho-parameter due to a heavy Higgs particle

International Nuclear Information System (INIS)

Bij, J.J. van der.

1983-01-01

The main part of this thesis is concerned with the calculation of the two-loop contribution to the rho-parameter, i.e. the ratio of charged and neutral vector boson masses, due to a heavy Higgs particle. It involves the calculation of a large number of Feynman diagrams. The result is that a contribution growing like m 2 exists (m = Higgs mass), but it does not correspond to the poles at n=3 in the non-linear model. First the model is introduced, the precise definition of rho is given and the formal connection with the non-linear model is derived. Then the one-loop infinities are calculated. It is shown that no m 2 corrections are observable in one loop and the log m 2 correction to rho is calculated. Finally the two-loop correction to rho is calculated. (Auth.)

Pure apraxia of speech due to infarct in premotor cortex.

Science.gov (United States)

Patira, Riddhi; Ciniglia, Lauren; Calvert, Timothy; Altschuler, Eric L

Apraxia of speech (AOS) is now recognized as an articulation disorder distinct from dysarthria and aphasia. Various lesions have been associated with AOS in studies that are limited in precise localization due to variability in size and type of pathology. We present a case of pure AOS in setting of an acute stroke to localize more precisely than ever before the brain area responsible for AOS, dorsal premotor cortex (dPMC). The dPMC is in unique position to plan and coordinate speech production by virtue of its connection with nearby motor cortex harboring corticobulbar tract, supplementary motor area, inferior frontal operculum, and temporo-parietal area via the dorsal stream of dual-stream model of speech processing. The role of dPMC is further supported as part of dorsal stream in the dual-stream model of speech processing as well as controller in the hierarchical state feedback control model. Copyright © 2017 Polish Neurological Society. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

A comparison of due-date selection rules

NARCIS (Netherlands)

Baker, K.R.; Bertrand, J.W.M.

1981-01-01

In sequencing and scheduling models it is usually assumed that due dates represent exogeneous information. In many practical settings, however, due dates can be discretionary, or at least negotiable. Relatively few studies have incorporated discretionary due dates, and even then the rules proposed

Optical Illusions. Semiotic Analysis of Their Use in Commercials

OpenAIRE

Chromečková, Lucie

2013-01-01

Optical illusions are inseparably part of our lives. We are influenced by illusions on daily base, in commercials, various tests or fun web pages. But we must ask a questions about background of illusions, about their history. What was the original meaning of illusions? When we are confronted with illusion, what's happend? Do we understood illusions? How should be our attitude to illusions? These are only few questions, that this work try to answer. Due to history we try to understand illusio...

Problems of Face Recognition in Patients with Behavioral Variant Frontotemporal Dementia

OpenAIRE

Chandra, Sadanandavalli Retnaswami; Patwardhan, Ketaki; Pai, Anupama Ramakanth

2017-01-01

Introduction: Faces are very special as they are most essential for social cognition in humans. It is partly understood that face processing in its abstractness involves several extra striate areas. One of the most important causes for caregiver suffering in patients with anterior dementia is lack of empathy. This apart from being a behavioral disorder could be also due to failure to categorize the emotions of the people around them. Patients and Methods: Inlusion criteria: DSM IV for Bv FTD ...

Motorcycle Parts

Science.gov (United States)

1993-01-01

An article in NASA Tech Briefs describing a vacuum bagging process for forming composite parts helped a small Oklahoma Company to improve its manufacturing process. President of Performance Extremes, Larry Ortega, and his partners make motorcycle parts from carbon/epoxy to reduce weight. Using vacuum bags, parts have a better surface and fewer voids inside. When heat used in the vacuum bag process caused deformation upon cooling, a solution found in another tech brief solved the problem. A metal plate inside the vacuum bag made for more even heat transfer. A third article described a simple procedure for repairing loose connector pins, which the company has also utilized.

Bat mortality due to collision with wind turbines in Kutch District, Gujarat, India

Directory of Open Access Journals (Sweden)

S.R. Kumar

2013-09-01

Full Text Available Globally, India is at fifth position in wind power generation with an installed capacity of 14550 MW. Based onrecent reports from certain parts of the world there is also a growing concern on the environmental impact of wind turbines on bats and birds in other places too. In the Indian context the impact of wind farms on birds and bats are less studied with very little scientific literature available on the subject. Since September 2011, we have been conducting research on birds and bats mortality in wind farms of Kutch District, Gujarat, India. During the study period two carcasses of the Greater Mouse-tailed Bat Rhinopoma microphyllum were recorded due to collision with wind turbines.

Is part-time work a good or bad opportunity for people with disabilities? A European analysis.

Science.gov (United States)

Pagán, Ricardo

2007-12-30

The purpose of this article is to analyse the incidence of part-time employment among people with disabilities within a European context. Particular attention is paid to the type of part-time employment (voluntary vs. involuntary) and the levels of job satisfaction that people with disabilities report. Using data from the European Community Household Panel for the period 1995-2001, we estimate part-time rates, preferences and levels of job satisfaction for people with and without disabilities for 13 European countries. The results show that a higher number of people with disabilities work part-time, compared to non-disabled workers. This is mainly due to disabled part-time workers having a much higher preference for part-time working than people without disability. This finding is corroborated when we analyse the levels of job satisfaction for disabled part-time workers. Part-time employment becomes a relevant instrument for policy makers and employers to improve the social inclusion, income and labour conditions of the people with disabilities because it allows these people to achieve a much better balance between their personal and health needs and working life.

Adherence to tuberculosis care in Canadian Aboriginal populations, Part 1: definition, measurement, responsibility, barriers.

Science.gov (United States)

Orr, Pamela

2011-04-01

In a 2-part series, the current literature with respect to adherence to tuberculosis care among Canadian Aboriginal populations is reviewed. In the current paper, which comprises part 1 of this review, adherence is defined, and methods of measurement, issues of responsibility and potential barriers to adherence are explored. Study design. Literature review. A systematic search and analytic review of relevant studies was undertaken, including an online search of electronic databases (PubMed, PsychINFO, MEDLINE, Native Health Database, Scopus, Social Science Citation Index) and publications by governmental and non-governmental agencies. Poor adherence to therapy for TB disease is the most common cause of initial treatment failure and of disease relapse worldwide. Adherence to care for TB disease is necessary for the health of both the affected individual and society as a whole. Adherence is a task-specific behaviour that is not inherent to ethnic identity. The term applies only when common agreement over a care plan has been reached between patient and provider. The International Standards for Tuberculosis Care and the Patients Charter outline the responsibilities for adherence on the part of both patients and providers. For Canadian Aboriginals, barriers to adherence may derive from a complex interaction between the health system, personal factors and social factors, which may include dysfunctional acute and public health systems, dissonant (between health care provider and patient) belief systems, concurrent co-morbidities and life stressors, poverty and social stigma. Adherence is a task-specific behaviour, not a personality trait. It is influenced by the interaction of systemic, personal and societal factors. These factors must be understood within the historical experience of TB and the cultural meaning of health and illness among Indigenous Canadians.

Joint Optimization of Preventive Maintenance and Spare Parts Inventory with Appointment Policy

Directory of Open Access Journals (Sweden)

Jing Cai

2017-01-01

Full Text Available Under the background of the wide application of condition-based maintenance (CBM in maintenance practice, the joint optimization of maintenance and spare parts inventory is becoming a hot research to take full advantage of CBM and reduce the operational cost. In order to avoid both the high inventory level and the shortage of spare parts, an appointment policy of spare parts is first proposed based on the prediction of remaining useful lifetime, and then a corresponding joint optimization model of preventive maintenance and spare parts inventory is established. Due to the complexity of the model, the combination method of genetic algorithm and Monte Carlo is presented to get the optimal maximum inventory level, safety inventory level, potential failure threshold, and appointment threshold to minimize the cost rate. Finally, the proposed model is studied through a case study and compared with both the separate optimization and the joint optimization without appointment policy, and the results show that the proposed model is more effective. In addition, the sensitivity analysis shows that the proposed model is consistent with the actual situation of maintenance practices and inventory management.

Stalking. Part II: Victims' problems with the legal system and therapeutic considerations.

Science.gov (United States)

Abrams, K M; Robinson, G E

1998-06-01

This paper is the second of 2 parts reviewing the topic of stalking. It focuses on victims difficulties with the legal system and the psychotherapeutic tasks for victims and therapists. Computerized literature searches were used to identify relevant papers from psychiatric and legal journals. Publications by victims' and women's organizations provided additional information. Victims suffer emotional consequences from being stalked. Additional stress is caused by the legal system's lack of understanding of the causes and consequences of stalking and inadequate and unenforced laws. The treatment of victims requires a comprehensive approach, including education, supportive psychotherapy, and discussion of practical measures. Therapists may overidentify with the patient's powerlessness or hesitate to take on a case out of fear of the stalker. Female therapists may protect themselves against the realization of their own vulnerability by blaming the victim, while male therapists may feel defensive or overprotective. Stalking is a crime with major mental health consequences which is often poorly understood by society. Therapists need to be aware of the victim's emotional reactions, the types of legal and practical supports available, and the possible biases of society. Further education and research should be encouraged.

Legislative change enabling use of early part-time sick leave enhanced return to work and work participation in Finland.

Science.gov (United States)

Viikari-Juntura, Eira; Virta, Lauri J; Kausto, Johanna; Autti-Rämö, Ilona; Martimo, Kari-Pekka; Laaksonen, Mikko; Leinonen, Taina; Husgafvel-Pursiainen, Kirsti; Burdorf, Alex; Solovieva, Svetlana

2017-09-01

Objectives The aim of the study was to assess the effectiveness of the use of part-time sick leave at the early (first 12 weeks) stage of work disability due to mental disorder or musculoskeletal disease on sustained return to work (RTW) and overall work participation. Methods In a nation-wide register-based quasi-experimental study, we compared sustained RTW (ie, ≥28 consecutive days at work) and 2-year work participation between the part- and full-time sickness absence (SA) benefit groups (N=1878 in each group) using propensity-score matching. Persons who received partial or full SA benefit due to musculoskeletal diseases or mental disorders between January 1, 2010 and December 31, 2011 were eligible as cases or controls, respectively. Results A higher proportion showed sustained RTW after part- compared to full-time sick leave [absolute risk difference 8.0%, 95% confidence interval (95% CI) 5.3-10.9]. Moreover, the proportion of time at work was at a 10.5% higher level in the part- compared to full-time sick leave group. The prevalence of full disability retirement was almost three-fold among the full- compared to part-time sick leave group, whereas partial disability retirement was 4.5-fold more prevalent in the part- compared to full-time sick leave group. Conclusions The use of part-time sick leave during the first three months of SA enhances RTW and overall work participation during two years among persons with mental disorders and musculoskeletal diseases. The prescription of part-time sick leave can be recommended at an early stage of work disability.

How End-Stage Renal Disease Patients Manage the Medicare Part D Coverage Gap

Science.gov (United States)

Kovacs, Pamela J.; Perkins, Nathan; Nuschke, Elizabeth; Carroll, Norman

2012-01-01

Medicare Part D was enacted to help elderly and disabled individuals pay for prescription drugs, but it was structured with a gap providing no coverage in 2010 between $2,830 and $6,440. Patients with end-stage renal disease (ESRD) are especially likely to be affected due to high costs of dialysis-related drugs and the importance of adherence for…

Airway management of a difficult airway due to prolonged enlarged goiter using loco-sedative technique

Directory of Open Access Journals (Sweden)

Divya Srivastava

2013-01-01

Full Text Available Appropriate airway management is an essential part of anesthesiologist′s role. Huge goiters can lead to distorted airway and difficulty in endotracheal intubation. In this report, we present a case of a 67-year-old woman with a huge toxic multinodular thyroid swelling, gradually increasing in size for last 20 years, where trachea was successfully intubated. She had a history of deferred surgery in June 2007 due to inability to intubate, despite 5-6 attempts using different laryngoscopes, bougie, and stylet. Patient was re-admitted in December 2011 for the surgery and was successfully intubated this time with help of fiberoptic intubation using loco-sedative technique. Patient was electively kept intubated postoperatively in view of chances of tracheomalacia due to prolonged large goiter. She was extubated successfully on post-op day 2 after demonstration of leak around trachea following tracheal tube cuff deflation. The different techniques of managing the difficult airway in these patients are discussed.

Systematic reviews of physical and rehabilitation medicine Cochrane contents. Part 1. Disabilities due to spinal disorders and pain syndromes in adults.

Science.gov (United States)

Negrini, S; Imperio, G; Villafañe, J H; Negrini, F; Zaina, F

2013-08-01

This article is the first in a series presenting the strongest published evidence for physical and rehabilitation medicine (PRM) to date coming from the Cochrane Collaboration. The intent of the series is to stimulate ideas for reviews and research in neglected areas of PRM. To systematically review the rehabilitation contents of the Cochrane Collaboration on disabilities due to spinal disorders or pain syndromes in adults. The Cochrane Database of Systematic Reviews was searched at the end of June 2013 for articles relevant for PRM about disabilities resulting from spinal disorders or pain syndromes in adults. Retrieved papers were classified according to the PRM approach: active therapies, which require active participation by patients to achieve treatment goals, and passive treatments, which rely on the application of external forces. The quality of the reviews was checked against the AMSTAR checklist. Reviews on spinal disorders or pain syndromes were found in the Cochrane Back Group (CBG) and in the Pain, Palliative and Supportive Care Group (CPPSCG). Thirty-eight (42.8%) of 89 Cochrane reviews in the CBG and 7 (2.4%) of 293 Cochrane reviews in the CPPSCG were included. All were of high quality (range, 8-11 points out of 11 on the AMSTAR checklist). The contents of the reviews are given in detail. This review presents an overview of the current evidence for PRM in the treatment of disabilities due to spinal disorders or pain syndromes in adults. Within PRM there is ample space for research in the Cochrane Collaboration and for producing original studies (randomized controlled trials [RCTs]). To apply evidence-based clinical practice, clinicians must be familiar with the current best evidence.

SUPPLIER EVALUATION AND SELECTION: CASE OF AN AUTOMOTIVE SPARE-PARTS SUPPLIER

OpenAIRE

Oflac, Bengu Sevil

2015-01-01

 The main aim of this study is to conduct a current state analysis for a leading original and spare parts producer operating in automobile industry. In the focused company, due to having some problems about purchasing process, there was a need for reviewing and restructuring supplier evaluation mechanism. In this perspective, based on the results of qualitative techniques conducted, reasons for poor evaluation systems were found. As a contribution to practice, in line with the needs of compan...

Structural integrity of heavy liquid-metal target installed in spallation neutron facility. Part 4: Consideration by fracture mechanics of target container window

International Nuclear Information System (INIS)

Ishikura, Syuichi; Kogawa, Hiroyuki; Futakawa, Masatoshi; Kikuchi, Kenji; Haga, Katsuhiro; Kaminaga, Masanori; Hino, Ryutaro

2004-01-01

Developments of the neutron scattering facility is carried out under the high-intensity proton accelerator project promoted by JAERI and KEK. To estimate the structural integrity of the heavy liquid-metal (mercury) target used as a spallation neutron source in a MW-class neutron scattering facility, static and dynamic stress (including pressure wave in mercury) behaviors due to the incident of 1MW-pulsed proton beam (Maximum heat density is 461W/cc) were analyzed. In the analyses, two type target containers with semi-cylindrical type and flat-type beam windows were used as analytical models. As a result, it is confirmed that the stress generated by the pressure wave becomes the largest at the center of the beam window, and the flat-type beam window is more advantageous from the structural viewpoint than the semi-cylindrical type beam window. It has been understood that the stress generated in the beam window by the pressure wave can be treated as the secondary stress. Then, it has been understood that the stress and the stress range generated in the target window were bellow the allowable stress level defined by the standard of JIS on the maximum stress and fatigue strength. It has been experimentally confirmed that a cavitation was generated by generating the negative pressure in mercury near the target beam window and a collapse of cavitation damaged to the target container material, as pits. Then, the fracture mechanical analyses were carried out on the pit and a crack on pit tip. Consequently, it was clarified that the crack would not propagate because the inner surface of the beam window was become the compressive stress field due to the steady state thermal stress. Moreover, the evaluation technique of the cavitation which would be needed in the future was summarized. (author)

Advanced software tools for digital loose part monitoring systems

International Nuclear Information System (INIS)

Ding, Y.

1996-01-01

The paper describes two software modules as analysis tools for digital loose part monitoring systems. The first module is called acoustic module which utilizes the multi-media features of modern personal computers to replay the digital stored short-time bursts with sufficient length and in good quality. This is possible due to the so-called puzzle technique developed at ISTec. The second module is called classification module which calculates advanced burst parameters and classifies the acoustic events in pre-defined classes with the help of an artificial multi-layer perception neural network trained with the back propagation algorithm. (author). 7 refs, 7 figs

Advanced software tools for digital loose part monitoring systems

Energy Technology Data Exchange (ETDEWEB)

Ding, Y [Institute for Safety Technology (ISTec) GmbH, Garching (Germany)

1997-12-31

The paper describes two software modules as analysis tools for digital loose part monitoring systems. The first module is called acoustic module which utilizes the multi-media features of modern personal computers to replay the digital stored short-time bursts with sufficient length and in good quality. This is possible due to the so-called puzzle technique developed at ISTec. The second module is called classification module which calculates advanced burst parameters and classifies the acoustic events in pre-defined classes with the help of an artificial multi-layer perception neural network trained with the back propagation algorithm. (author). 7 refs, 7 figs.

Modelling of an industrial environment, part 2.: External dose calculation with relevant countermeasures

International Nuclear Information System (INIS)

Eged, K.; Kis, Z.; Alvarez-Farizo, B.; Gil, J.; Voigt, G.

2002-01-01

The calculation of the collective dose and averted collective dose after applying countermeasures in an industrial environment has been divided in two parts. In the first part (Kis et al. 2002) separate Monte Carlo simulations of photon transport resulted in the air kermas per photon per unit area due to the industrial surfaces contaminated by 1 37C s at specific points using the so-called local approach. In the local approach the air kerma rates due to specific intervention elements at the evaluation locations in the whole environment are determined (Gutierrez et al. 2000). In this way the collective and averted collective dose due to the radiation from a particular intervention element (e.g. the roof of a building) can be obtained. It can, therefore, provide a ranking of the specific intervention elements based on their contribution to collective dose as well. The deposition pattern and the long-term behaviour of deposited radionuclides vary widely in natural circumstances; therefore the number of the photons emitted from the various surfaces per unit area and time can differ significantly. This means the results of the Monte Carlo simulations have to be weighted according to the number of emitted photons so that the actual radiation field can be set up. For this purpose, a dose calculation code has been developed in the framework of the TEMAS project (Gutierrez et al. 2000) which allows to calculate collective doses for different environments. This code has been applied in the present work

Model Integrasi Penjadwalan Produksi Batch dan Penjadwalan Perawatan dengan Kendala Due Date

Directory of Open Access Journals (Sweden)

Zahedi .

2014-01-01

Full Text Available This paper discusses the integration model of batch production and preventive maintenance scheduling on a single machine producing an item to be delivered at a common due date. The machine is a deteriorating machine that requires preventive maintenance to ensure the availability of the machine at a desired service level. Decision variables of the model are the number of preventive maintenances, the schedule, length of production runs, as well as the number of batches, batch sizes and the production schedule of the resulting batches for each production run. The objective function of the model is to minimize the total cost consisting of inventory costs during parts processing, setup cost and cost of preventive maintenance. The results show three important points: First, the sequence of optimal batches always follows the SPT (short processing time. Second, variation of preventive maintenance unit cost does not influence the sequence of batches. Third, the first production run length from production starting time is smaller than the next production run length and this pattern continues until the due date. When in process inventory unit cost is increased, the pattern will continue until a specified cost limit, and beyond the limit the pattern will change to be the opposite pattern.

Electro-thermal injuries due to high-current accidents with special regard to the skeletal muscles

Energy Technology Data Exchange (ETDEWEB)

Rausch, M.

1982-02-25

Seven patients suffering from high-current accidents with different degrees of severity are reported on. Damages to the striped musculature are preferentially considered. When the function of the cellular membrane is affected by an electric current, the Na/sup +//K/sup +/ mechanism collapses due to an increase of membrane permeability for calcium. Depolarisation, development of contractures, changes of the fibrillar structures and decay of the stripes or swelling of the Q (A) substance were found to indicate damage. A particular effect of electrothermal muscle damages is the affection of other organs, e.g. of the kidneys, provoked by an increased chromoprotein production and a higher output of myoglobin and hemoglobin. Since in case of an accident due to electric current affecting the musculature, more acid substances enter the vascular system, an acute renal damage provoked by an alkalinisation of the urine, shall be treated by drugs. In most cases, an anuria, occurring several days after deep burn of musculature, is a so-called constipational anuria, if it is not an anuria induced by a decrease of blood pressure or by shock. The therapy of wounds due to electrical burning depends on the size of the affected skin area and down to which depth the tissue is burnt. Particular attention must be paid to the affection of bones being situated in the depth of wounds due to burning. In the last part of the study possible reconstructive and ensuing rehabilitation measures are indicated.

Inverse Processing of Undefined Complex Shape Parts from Structural High Alloyed Tool Steel

Directory of Open Access Journals (Sweden)

Katarina Monkova

2014-02-01

Full Text Available The paper deals with the process of 3D digitization as a tool for increasing production efficiency of complex shaped parts. Utilizes the concept of reverse engineering and new the model of NC program generation STEP-NC, for the of templates production for winding the stator coil of electromotors that is for electric household appliances. The manual production of prototype was substituted by manufacturing with NC machines. A 3D scanner was used for data digitizing, CAD/CAM system Pro/Engineering was used for NC program generation, and 3D measuring equipment was used for verification of new produced parts. The company estimated that only due to the implementation of STEP NC standard into production process it was allowed to read the 3D geometry of the product without problems. It helps the workshop to shorten the time needed for part production by about 30%.

Information security risk management and incompatible parts of organization

Energy Technology Data Exchange (ETDEWEB)

Talabeigi, E.; Naeeini, S.G.J.

2016-07-01

Purpose: we prepared a questionnaire to evaluate Incompatible parts and also risk management in University of Science and Technology E-Learning Center and studying the Incompatible parts impacts on utility of organization. Design/methodology/approach: By using coalitional game theory we present a new model to recognize the degrees of incompatibility among independent divisions of an organization with dependent security assets. Based on positive and negative interdependencies in the parts, the model provides how the organization can decrease the security risks through non-cooperation rather than cooperation. we implement the proposed model of this paper by analyzing the data which have been provided by questionnaires from different three managers' ideas of Iran University of Science and Technology E-Learning Center located in Iran University of Science and Technology, Tehran, Iran. Findings: In general, by collecting data and analyzing them, the survey showed that Incompatible parts of organizations have negative impacts on utility of organization risk management process. Furthermore, it adds values to other organizations and provides the best practices in planning, developing, implementing and monitoring risk management in organizations. Research limitations/implications: Since Information security and also Risk Management are still areas which need to improve in some Iranian universities, we couldn’t consider them in our analysis. On the other hand, due to questionnaire limitation, the study’s sample size is 1. This size may be considered large for our statistical analysis. Originality/value: The main contribution of this paper is to propose a model for non-cooperation among a number of divisions in a organization and using risk management factors.

Information security risk management and incompatible parts of organization

International Nuclear Information System (INIS)

Talabeigi, E.; Naeeini, S.G.J.

2016-01-01

Purpose: we prepared a questionnaire to evaluate Incompatible parts and also risk management in University of Science and Technology E-Learning Center and studying the Incompatible parts impacts on utility of organization. Design/methodology/approach: By using coalitional game theory we present a new model to recognize the degrees of incompatibility among independent divisions of an organization with dependent security assets. Based on positive and negative interdependencies in the parts, the model provides how the organization can decrease the security risks through non-cooperation rather than cooperation. we implement the proposed model of this paper by analyzing the data which have been provided by questionnaires from different three managers' ideas of Iran University of Science and Technology E-Learning Center located in Iran University of Science and Technology, Tehran, Iran. Findings: In general, by collecting data and analyzing them, the survey showed that Incompatible parts of organizations have negative impacts on utility of organization risk management process. Furthermore, it adds values to other organizations and provides the best practices in planning, developing, implementing and monitoring risk management in organizations. Research limitations/implications: Since Information security and also Risk Management are still areas which need to improve in some Iranian universities, we couldn’t consider them in our analysis. On the other hand, due to questionnaire limitation, the study’s sample size is 1. This size may be considered large for our statistical analysis. Originality/value: The main contribution of this paper is to propose a model for non-cooperation among a number of divisions in a organization and using risk management factors.

Clinical governance; How been understood, what is needed? Nurses' perspective

Directory of Open Access Journals (Sweden)

Homayoun Sadeghi Bazargani

2015-07-01

Full Text Available Introduction: Clinical Governance (CG is an overarching concept, using organizational capacity, safeguards high standards of the health services and provides a safe care for patients.  The aim of this research was to study nurses’ perception about Clinical Governance. Materials and Methods: A qualitative study was done with Focus Group Discussions (FGD. Purposeful Sampling was used to select the objectives including 65 participants. Actually 7 FGD’s were held. Content analysis was used to extract the meaningful themes. Results:Nurses believed that patient centeredness and evidence based practice is the core of the CG concept. Also they mentioned that cultural change, staffs training, adequate financial and human resources are required to successfully implementation of CG in hospitals.  Conclusion: Spreading up a shared vision about CG and providing the required infrastructures in hospitals would be facilitate CG initiatives. Proper commitment of the managers and staff participation could lead an effective CG implementation.

Default options in the ICU: widely used but insufficiently understood

Science.gov (United States)

Hart, Joanna; Halpern, Scott D.

2015-01-01

Purpose of review Default options dramatically influence the behavior of decision makers and may serve as effective decision support tools in the ICU. Their use in medicine has increased in an effort to improve efficiency, reduce errors, and harness the potential of healthcare technology. Recent findings Defaults often fall short of their predicted influence when employed in critical care settings as quality improvement interventions. Investigations reporting the use of defaults are often limited by variations in the relative effect across sites. Preimplementation experiments and long-term monitoring studies are lacking. Summary Defaults in the ICU may help or harm patients and clinical efficiency depending on their format and use. When constructing and encountering defaults, providers should be aware of their powerful and complex influences on decision making. Additional evaluations of the appropriate creation of healthcare defaults and their resulting intended and unintended consequences are needed. PMID:25203352

How is evidence to be understood in modern coaching psychology?

DEFF Research Database (Denmark)

Spaten, Ole Michael; Løkken, Lillith Olesen

2015-01-01

The hunt for evidence in modern coaching psychology could be counter-productive, and possibly lead to a simplified approach to research, practice, searching for “definitive truths”. The article discuss a critical approach to evidence hierarchies, and the prevalent (medical) understanding...

Content-Based Instruction Understood in Terms of Connectionism and Constructivism

Science.gov (United States)

Lain, Stephanie

2016-01-01

Despite the number of articles devoted to the topic of content-based instruction (CBI), little attempt has been made to link the claims for CBI to research in cognitive science. In this article, I review the CBI model of foreign language (FL) instruction in the context of its close alignment with two emergent frameworks in cognitive science:…

Well Researched, Yet Little Understood: Young Adults and Physical Activity

Science.gov (United States)

Cothran, Donetta; Kulinna, Pamela Hodges

2005-01-01

The authors present two beginning studies. One investigated the teaching-style preferences of young adults, and the other looked at physical activity trends within this age group. One key to understanding young adults and physical activity is to recognize the importance of participant cognition on physical activity patterns. From this…

The bare parameters of Gribov's Langrangian are understood and determined

International Nuclear Information System (INIS)

Bishari, M.

1977-01-01

In the context of the ''1/N Dual Unitarization'' scheme, an explicit dynamical study of the triple bare pomeron mechanism which governs the interaction term in Gribov's Lagrangian is presented. Together with the previously established bare pomeron slope and intercept, controlling respectively, the kinetic and mass terms in Gribov's Lagrangian, this work demonstrates the viability of the ''1/N Dual Unitarization'' approach for a field theory of interaction bare pomerons. (author)

How Inclusive Education Is Understood by Principals of Independent Schools

Science.gov (United States)

Gous, Jennifer Glenda; Eloff, Irma; Moen, Melanie Carmen

2014-01-01

Inclusive education has become a practice that has been adopted by many schools across the globe and most usually in first-world countries. As a whole-school system, it occurs less frequently in developing countries including South Africa which unlike many developing countries has a sound infrastructure and many excellent schools in both the state…

Q Fever: An Old but Still a Poorly Understood Disease

Directory of Open Access Journals (Sweden)

Hamidreza Honarmand

2012-01-01

Full Text Available Q fever is a bacterial infection affecting mainly the lungs, liver, and heart. It is found around the world and is caused by the bacteria Coxiella burnetii. The bacteria affects sheep, goats, cattle, dogs, cats, birds, rodents, and ticks. Infected animals shed this bacteria in birth products, feces, milk, and urine. Humans usually get Q fever by breathing in contaminated droplets released by infected animals and drinking raw milk. People at highest risk for this infection are farmers, laboratory workers, sheep and dairy workers, and veterinarians. Chronic Q fever develops in people who have been infected for more than 6 months. It usually takes about 20 days after exposure to the bacteria for symptoms to occur. Most cases are mild, yet some severe cases have been reported. Symptoms of acute Q fever may include: chest pain with breathing, cough, fever, headache, jaundice, muscle pains, and shortness of breath. Symptoms of chronic Q fever may include chills, fatigue, night sweats, prolonged fever, and shortness of breath. Q fever is diagnosed with a blood antibody test. The main treatment for the disease is with antibiotics. For acute Q fever, doxycycline is recommended. For chronic Q fever, a combination of doxycycline and hydroxychloroquine is often used long term. Complications are cirrhosis, hepatitis, encephalitis, endocarditis, pericarditis, myocarditis, interstitial pulmonary fibrosis, meningitis, and pneumonia. People at risk should always: carefully dispose of animal products that may be infected, disinfect any contaminated areas, and thoroughly wash their hands. Pasteurizing milk can also help prevent Q fever.

Ultrafast nonlinear dynamics of thin gold films due to an intrinsic delayed nonlinearity

Science.gov (United States)

Bache, Morten; Lavrinenko, Andrei V.

2017-09-01

Using long-range surface plasmon polaritons light can propagate in metal nano-scale waveguides for ultracompact opto-electronic devices. Gold is an important material for plasmonic waveguides, but although its linear optical properties are fairly well understood, the nonlinear response is still under investigation. We consider the propagation of pulses in ultrathin gold strip waveguides, modeled by the nonlinear Schrödinger equation. The nonlinear response of gold is accounted for by the two-temperature model, revealing it as a delayed nonlinearity intrinsic in gold. The consequence is that the measured nonlinearities are strongly dependent on pulse duration. This issue has so far only been addressed phenomenologically, but we provide an accurate estimate of the quantitative connection as well as a phenomenological theory to understand the enhanced nonlinear response as the gold thickness is reduced. In comparison with previous works, the analytical model for the power-loss equation has been improved, and can be applied now to cases with a high laser peak power. We show new fits to experimental data from the literature and provide updated values for the real and imaginary parts of the nonlinear susceptibility of gold for various pulse durations and gold layer thicknesses. Our simulations show that the nonlinear loss is inhibiting efficient nonlinear interaction with low-power laser pulses. We therefore propose to design waveguides suitable for the mid-IR, where the ponderomotive instantaneous nonlinearity can dominate over the delayed hot-electron nonlinearity and provide a suitable plasmonics platform for efficient ultrafast nonlinear optics.

Spasmodic Dysphonia: A Review. Part 2: Characterization of Pathophysiology.

Science.gov (United States)

Hintze, Justin M; Ludlow, Christy L; Bansberg, Stephen F; Adler, Charles H; Lott, David G

2017-10-01

Objective The purpose of this review is to describe the recent advances in characterizing spasmodic dysphonia. Spasmodic dysphonia is a task-specific focal laryngeal dystonia characterized by irregular and uncontrolled voice breaks. The pathophysiology is poorly understood, and there are diagnostic difficulties. Data Sources PubMed, Google Scholar, and Cochrane Library. Review Methods The data sources were searched using the following search terms: ( spasmodic dysphonia or laryngeal dystonia) and ( etiology, aetiology, diagnosis, pathogenesis, or pathophysiology). Conclusion The diagnosis of spasmodic dysphonia can be difficult due to the lack of a scientific consensus on diagnostic criteria and the fact that other voice disorders may present similarly. Confusion can arise between spasmodic dysphonia and muscle tension dysphonia. Spasmodic dysphonia symptoms are tied to particular speech sounds, whereas muscle tension dysphonia is not. With the advent of more widespread use of high-speed laryngoscopy and videokymography, measures of the disruptions in phonation and delays in the onset of vocal fold vibration after vocal fold closure can be quantified. Recent technological developments have expanded our understanding of the pathophysiology of spasmodic dysphonia. Implications for Practice A 3-tiered approach, involving a questionnaire, followed by speech assessment and nasolaryngoscopy is the most widely accepted method for making the diagnosis in most cases. More experimental and invasive techniques such as electromyography and neuroimaging have been explored to further characterize spasmodic dysphonia and aid in diagnosing difficult cases.

Petri nets - part 1: concepts and application areas

International Nuclear Information System (INIS)

Sivertsen, Terje

2004-03-01

There exist a number of models, languages, methods, and tools that support the specification and analysis of system requirements. One important class comprises graphical methods based on the concept of Petri nets. Due to the wide variety of applications, these methods are relevant also in research and applications outside the digital systems safety domain. The present report constitutes the first of three parts of a unified exposition of graphical methods based on the concept of Petri nets. The report provides an introduction to basic concepts of Petri nets and an overview of a wide variety of application areas. The second part of the trilogy will present a number of techniques and tools. The third part will focus on analysis. Petri nets have been proposed for a wide variety of applications, and new areas are considered as new challenges emerge from scientific, technological, and social developments. The wide variety of application areas reflects a broad interest in Petri nets, coming from diverse directions. Empirically, as well as theoretically, there are good reasons to claim that Petri nets are applicable for many different kinds of problems. What is common to the different applications and problems addressed is the need for a formalism that allows adequate representation of important system characteristics like concurrency, asyncronicity, distribution, parallelism, and non-determinism. Several of the references in the report discuss NPP-related applications, or applications with great potentials for technology transfer from other areas to the nuclear domain. (Author)

Multi-view and 3D deformable part models.

Science.gov (United States)

Pepik, Bojan; Stark, Michael; Gehler, Peter; Schiele, Bernt

2015-11-01

As objects are inherently 3D, they have been modeled in 3D in the early days of computer vision. Due to the ambiguities arising from mapping 2D features to 3D models, 3D object representations have been neglected and 2D feature-based models are the predominant paradigm in object detection nowadays. While such models have achieved outstanding bounding box detection performance, they come with limited expressiveness, as they are clearly limited in their capability of reasoning about 3D shape or viewpoints. In this work, we bring the worlds of 3D and 2D object representations closer, by building an object detector which leverages the expressive power of 3D object representations while at the same time can be robustly matched to image evidence. To that end, we gradually extend the successful deformable part model [1] to include viewpoint information and part-level 3D geometry information, resulting in several different models with different level of expressiveness. We end up with a 3D object model, consisting of multiple object parts represented in 3D and a continuous appearance model. We experimentally verify that our models, while providing richer object hypotheses than the 2D object models, provide consistently better joint object localization and viewpoint estimation than the state-of-the-art multi-view and 3D object detectors on various benchmarks (KITTI [2] , 3D object classes [3] , Pascal3D+ [4] , Pascal VOC 2007 [5] , EPFL multi-view cars[6] ).

Panhypopituitarism Due to Hemochromatosis

OpenAIRE

Mesut Özkaya; Kadir Gis; Ali Çetinkaya

2013-01-01

Hemochromatosis is an iron storage disease. Panhypopituitarism is a clinical condition in which the anterior pituitary hormones are deficient. Herein, we report a rare case of panhypopituitarism due to hemochromatosis. Turk Jem 2013; 17: 125-6

Constitutional Due Process and Educational Administration.

Science.gov (United States)

Uerling, Donald F.

1985-01-01

Discusses substantive and procedural due process as required by the United States Constitution and interpreted by the Supreme Court, with particular reference to situations arising in educational environments. Covers interests protected by due process requirements, the procedures required, and some special considerations that may apply. (PGD)

Most important factors modelling health status of an individual and the population. Part 1

Directory of Open Access Journals (Sweden)

Anna Sobieszczańska

2016-12-01

Full Text Available Introduction Human state of health is determined by so many factors that despite numerous studies conducted in many countries worldwide it is not possible to define them unequivocally. Health and diseases are conditioned in various parts of the world in different ways, both of the total population and the individual. Undoubtedly, these are strong premises to continue studies in the direction of unification of the definitions of health, disease, and disability.  In every country there is a different level of recognition of health problems of the population, their dimensions, causes and consequences, which should constitute knowledge to determine  projects, strengthening and improvement of the quality of health care. Modern actions in the domain of health promotion, prophylaxis, as well as health education, are of primary importance in the modelling of the state of health.  Objective The objective of the study was presentation of widely understood health and social factors, which may effectively influence the improvement of the state of health, both of an individual and the population, as evaluated in the sphere of health behaviours, availability and level of the health services offered, and the state of advancement of epidemiological knowledge while assessing positive and negative health measures.    Description of the state of knowledge The data published in many scientific studies, mainly by the agendas of the World Health Organization,  demonstrate that the factors shaping the level of human health include: incorrect life style, hazards within the physical environment, widely understood geographic factors (natural, climatic, which are specific in some latitudes, and the quality of care provided by health services. Many researchers have no doubt that from each of the large groups of factors it is possible to select smaller groups, the number and quality of which are  characteristic or highly specific to various groups of people

Study of the activation of the parts components of the CV-28 cyclotron

International Nuclear Information System (INIS)

Fajardo, P.W.

1986-08-01

The CV-17 cyclotron, isochronous, compact, of variable energy is an accelerator of charged particles and is applied in several situations such as: radioisotopes production, neutron production, irradiation damage analysis, activation analysis. During the production of the particle beams, the parts components of the interior of the cyclotron are irradiated and become radioactive. Due the fact of the cyclotron require maintenance, the knowledgement of the radionuclides present is of primordial importance of the view point of the radioprotection. Taking the excitation function of a nuclear reaction is observed that determined reaction may happen and produce a radionuclide. The radionuclides formed in the parts components by charged particles are presented. (V.R.B.)

Risks to offshore installations in Europe due to natural hazards

Science.gov (United States)

Necci, Amos; Krausmann, Elisabeth

2017-04-01

Natural hazards, such as storms, earthquakes, or lightning are a major threat to industry. In particular, chemical plants, storage facilities, pipelines, and offshore oil and gas facilities are vulnerable to natural events which can cause hazardous materials releases and thereby endanger workers, the population and the environment. These technological accidents are commonly referred to as Natech accidents. Recent events have increased concerns about safety in the offshore oil and gas sector, and the need for improving knowledge on the matter has become evident. With those premises, we analyzed accidents, near misses and accident precursors at offshore facilities in Europe caused by natural events using both a statistical and a qualitative approach. For this purpose, we screened the World Offshore Accident Database (WOAD) to identify all incidents that featured natural events as causes or aggravating factors. A dataset of 1,085 global Natech events was built for the statistical analysis. Among those, a subset composed of 303 European records was selected. The results of the analysis showed that offshore Natech events in Europe are frequent; they resulted, however, in low consequences. The main threat to offshore facilities resulted from bad weather, such as strong winds and heavy seas. Storms can put intense loads on the structural parts of offshore installations, eventually exceeding design resistance specifications. Several incidents triggered by lightning strikes and earthquakes were also recorded. Substantial differences in terms of vulnerability, damage modality and consequences emerged between fixed and floating offshore structures. The main damage mode for floating structures was the failure of station keeping systems due to the rupture of mooring or anchors, mainly caused by adverse meteorological conditions. Most of the incidents at fixed offshore structures in Europe involved falling loads for both metal jacket and concrete base platforms due to storms. In

Standard biological parts knowledgebase.

Directory of Open Access Journals (Sweden)

Michal Galdzicki

2011-02-01

Full Text Available We have created the Knowledgebase of Standard Biological Parts (SBPkb as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org. The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org. SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL, a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

Standard Biological Parts Knowledgebase

Science.gov (United States)

Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M.; Gennari, John H.

2011-01-01

We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate “promoter” parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible. PMID:21390321

Standard biological parts knowledgebase.

Science.gov (United States)

Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M; Gennari, John H

2011-02-24

We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

Loose part monitoring device

International Nuclear Information System (INIS)

Nomura, Hiroshi.

1992-01-01

The device of the present invention estimates a place where loose parts occur and structural components as the loose parts in a fluid flow channel of a reactor device, to provide information thereof to a plant operator. That is, the device of the present invention comprises (1) a plurality of detectors disposed to each of equipments constituting fluid channels, (2) an abnormal sound sensing device for sensing signals from the detectors, (3) an estimation section for estimating the place where the loose parts occur and the structural components thereof based on the signals sensed by the abnormal sound sensing section, (4) a memory section for storing data of the plant structure necessary for the estimation, and (5) a display section for displaying the result of the estimation. In such a device, the position where the loose parts collide against the plant structural component and the energy thereof are estimated. The dropping path of the loose parts is estimated from the estimation position. Parts to be loose parts in the path are listed up. The parts on the list is selected based on the estimated energy thereby enabling to determine the loose parts. (I.S.)

Prevention of Dealloying in Manganese Aluminium Bronze Propeller: Part II

Directory of Open Access Journals (Sweden)

Napachat Tareelap

2014-03-01

Full Text Available Due to the failure of manganese aluminium bronze (MAB propeller caused by dealloying corrosion as described in Part I [1], this work aims to study the prevention of dealloying corrosion using aluminium and zinc sacrificial anodes. The results indicated that both of the sacrificial anodes could prevent the propeller from dealloying. Moreover, the dealloying in seawater was less than that found in brackish water. It was possible that hydroxide ions, from cathodic reaction, reacted with calcium in seawater to form calcium carbonate film protecting the propeller from corrosion.

DISCRETIZATION APPROACH USING RAY-TESTING MODEL IN PARTING LINE AND PARTING SURFACE GENERATION

Institute of Scientific and Technical Information of China (English)

HAN Jianwen; JIAN Bin; YAN Guangrong; LEI Yi

2007-01-01

Surface classification, 3D parting line, parting surface generation and demoldability analysis which is helpful to select optimal parting direction and optimal parting line are involved in automatic cavity design based on the ray-testing model. A new ray-testing approach is presented to classify the part surfaces to core/cavity surfaces and undercut surfaces by automatic identifying the visibility of surfaces. A simple, direct and efficient algorithm to identify surface visibility is developed. The algorithm is robust and adapted to rather complicated geometry, so it is valuable in computer-aided mold design systems. To validate the efficiency of the approach, an experimental program is implemented. Case studies show that the approach is practical and valuable in automatic parting line and parting surface generation.

On the Effects of Frequency Scaling Over Capacity Scaling in Underwater Networks—Part I

DEFF Research Database (Denmark)

Shin, Won-Yong; Roetter, Daniel Enrique Lucani; Médard, Muriel

2013-01-01

power-limited network. Interestingly, it is shown that the upper bound is intrinsically related to the attenuation parameter but not the spreading factor. Furthermore, we propose an achievable communication scheme based on the nearest-neighbor MH transmission, which is suitable due to the low......In this two-part paper, information-theoretic capacity scaling laws are analyzed in an underwater acoustic network with n regularly located nodes on a square, in which both bandwidth and received signal power can be limited significantly. Parts I and II deal with an extended network of unit node...... parameter that depends on the frequency scaling as well as the transmission distance. Upper and lower bounds on the capacity scaling are then derived. In Part I, we show that the upper bound on capacity for extended networks is inversely proportional to the attenuation parameter, thus resulting in a highly...

Lung Metastasis of Primary Alveolar Soft-Part Sarcoma Occurring 20 Years after Initial Treatment

Directory of Open Access Journals (Sweden)

R. F. Falkenstern-Ge

2013-01-01

Full Text Available A 30-year old woman was referred to our center because of suspicion of a primary lung tumor of the right upper lobe. Histological examination of the lung lesion revealed lung metastasis of a previously treated alveolar soft part sarcoma of the musculus vastus medialis of the right femur, which was resected 20 years ago. Alveolar soft-part sarcoma is a rare malignant tumor that occurs most often in the soft tissue of lower limbs. It is a slow-growing malignant soft tissue tumor arising in muscle tissue, usually in young adults. Due to pleural and extensive mediastinal infiltration with bilateral lung metastases, a systemic treatment with chemotherapy doxorubicin and ifosfamide was initiated. Late metastases from previously treated alveolar part sarcoma should be considered in patients with suspicious lung lesions even if surgical treatment was performed a long time ago.

34 CFR 674.41 - Due diligence-general requirements.

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Due diligence-general requirements. 674.41 Section 674... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM Due Diligence § 674.41 Due diligence—general requirements. (a) General. Each institution shall exercise due diligence in collecting...

Vertical deformation at western part of Sumatra

Energy Technology Data Exchange (ETDEWEB)

Febriyani, Caroline, E-mail: caroline.fanuel@students.itb.ac.id; Prijatna, Kosasih, E-mail: prijatna@gd.itb.ac.id; Meilano, Irwan, E-mail: irwan.meilano@gd.itb.ac.id

2015-04-24

This research tries to make advancement in GPS signal processing to estimate the interseismic vertical deformation field at western part of Sumatra Island. The data derived by Continuous Global Positioning System (CGPS) from Badan Informasi Geospasial (BIG) between 2010 and 2012. GPS Analyze at Massachusetts Institute of Technology (GAMIT) software and Global Kalman Filter (GLOBK) software are used to process the GPS signal to estimate the vertical velocities of the CGPS station. In order to minimize noise due to atmospheric delay, Vienna Mapping Function 1 (VMF1) is used as atmospheric parameter model and include daily IONEX file provided by the Center for Orbit Determination in Europe (CODE) as well. It improves GAMIT daily position accuracy up to 0.8 mm. In a second step of processing, the GLOBK is used in order to estimate site positions and velocities in the ITRF08 reference frame. The result shows that the uncertainties of estimated displacement velocity at all CGPS stations are smaller than 1.5 mm/yr. The subsided deformation patterns are seen at the northern and southern part of west Sumatra. The vertical deformation at northern part of west Sumatra indicates postseismic phase associated with the 2010 and 2012 Northern Sumatra earthquakes and also the long-term postseismic associated with the 2004 and 2005 Northern Sumatra earthquakes. The uplifted deformation patterns are seen from Bukit Tinggi to Seblat which indicate a long-term interseismic phase after the 2007 Bengkulu earthquake and 2010 Mentawai earthquake. GANO station shows a subsidence at rate 12.25 mm/yr, indicating the overriding Indo-Australia Plate which is dragged down by the subducting Southeast Asian Plate.

PERICARDITIS: ETIOLOGY, CLASSIFICATION, CLINIC, DIAGNOSTICS, TREATMENT. PART II

Directory of Open Access Journals (Sweden)

A.B. Sugak

2009-01-01

Full Text Available Pericarditis maybe caused by different agents: viruses, bacteria, tuberculosis, and it may be autoimmune. All these types of diseases have similar clinical signs, but differ by prevalence, prognosis and medical tactics. Due to achievements of radial methods of visualization, molecular biology, and immunology, we have an opportunity to provide early specific diagnostics and etiological treatment of inflammatory diseases of pericardium. The second part of lecture presents main principles of differential diagnostics of specific types of pericarditis, gives characteristics of several often accruing types of disease, and describes treatment and tactics of management of patients with pericarditis.Key words: children, pericarditis.(Voprosy sovremennoi pediatrii — Current Pediatrics. 2009;8(3:76-81

Inspection of additive manufactured parts using laser ultrasonics

Science.gov (United States)

Lévesque, D.; Bescond, C.; Lord, M.; Cao, X.; Wanjara, P.; Monchalin, J.-P.

2016-02-01

Additive manufacturing is a novel technology of high importance for global sustainability of resources. As additive manufacturing involves typically layer-by-layer fusion of the feedstock (wire or powder), an important characteristic of the fabricated metallic structural parts, such as those used in aero-engines, is the performance, which is highly related to the presence of defects, such as cracks, lack of fusion or bonding between layers, and porosity. For this purpose, laser ultrasonics is very attractive due to its non-contact nature and is especially suited for the analysis of parts of complex geometries. In addition, the technique is well adapted to online implementation and real-time measurement during the manufacturing process. The inspection can be performed from either the top deposited layer or the underside of the substrate and the defects can be visualized using laser ultrasonics combined with the synthetic aperture focusing technique (SAFT). In this work, a variety of results obtained off-line on INCONEL® 718 and Ti-6Al-4V coupons that were manufactured using laser powder, laser wire, or electron beam wire deposition are reported and most defects detected were further confirmed by X-ray micro-computed tomography.

Quantum cascade laser-based analyzer for hydrogen sulfide detection at sub-parts-per-million levels

Science.gov (United States)

Nikodem, Michal; Krzempek, Karol; Stachowiak, Dorota; Wysocki, Gerard

2018-01-01

Due to its high toxicity, monitoring of hydrogen sulfide (H2S) concentration is essential in many industrial sites (such as natural gas extraction sites, petroleum refineries, geothermal power plants, or waste water treatment facilities), which require sub-parts-per-million sensitivities. We report on a quantum cascade laser-based spectroscopic system for detection of H2S in the midinfrared at ˜7.2 μm. We present a sensor design utilizing Herriott multipass cell and a wavelength modulation spectroscopy to achieve a detection limit of 140 parts per billion for 1-s integration time.

Gli effetti socio-economici e spaziali del servizio ferroviario dell’Alta Velocità: due casi a confronto

Directory of Open Access Journals (Sweden)

Loredana Consuelo Travascio

2008-05-01

Full Text Available L’articolo fornisce una lettura degli effetti socio-economici e spaziali generati dalla messa in esercizio di una rete ferroviaria ad AV sull’organizzazione territoriale. Esso si articola in due parti. Nella prima, sono analizzati gli effetti che in letteratura sono attribuiti alle infrastrutture di trasporto, focalizzandosi sulle ripercussioni che la messa in esercizio dell’AV ha generato sulla crescita demografica e sulla localizzazione delle attività economiche attorno alle stazioni, nonché sulla domanda di trasporto e sulla riconfigurazione dei flussi. Nella seconda parte si passa allo studio di due casi significativi: il Giappone, dove l’introduzione del servizio ha modificato la struttura socio-economica del territorio; la Spagna, dove ha favorito la comparsa di nuove tipologie di utenti e la ridefinizione delle relazioni tra le varie città servite dall’infrastruttura.

Bunch motion in the presence of the self-induced voltage due to a reactive impedance; 1, RF off

CERN Document Server

Shaposhnikova, Elena

1995-01-01

Analytic self-consistent solutions have been found for the nonlinear Vlasov equation describing different types of behaviour with time of an intense bunch under the influence of voltage induced due to a reactive part of broad band impedance. The problem is solved for the particular type of the initial distribution function in longitudinal phase space which is elliptic and corresponds to parabolic line density. The first part of the paper is devoted to the consideration of the effects in the machine with RF off. In this case induced voltage is changing with time and, as in the case with RF on, can have a significant effect on bunch motion. Numerical estimations for the SPS show that this effect can be important for manipulations with beam at 26GeV. Measurements of the change in the rate of debunching with intensity can also be used to estimate the value of the impedance. The same method is applied in the second part of the paper to analyse time dependent effects of potential well distortion when RF is on.

Changes in radiocesium contamination from Fukushima in foliar parts of 10 common tree species in Japan between 2011 and 2013.

Science.gov (United States)

Yoshihara, Toshihiro; Matsumura, Hideyuki; Tsuzaki, Masaharu; Wakamatsu, Takashi; Kobayashi, Takuya; Hashida, Shin-Nosuke; Nagaoka, Toru; Goto, Fumiyuki

2014-12-01

Yearly changes in radiocesium ((137)Cs) contamination, primarily due to the Fukushima accident of March 2011, were observed in the foliar parts of 10 common woody species in Japan (Chamaecyparis obtusa, Cedrus deodara, Pinus densiflora, Cryptomeria japonica, Phyllostachys pubescens, Cinnamomum camphora, Metasequoia glyptostroboides, Prunus × yedoensis, Acer buergerianum, and Aesculus hippocastanum). The samples were obtained from Abiko (approximately 200 km SSW of the Fukushima Dai-ichi Nuclear Power Plant) during each growing season between 2011 and 2013, and the foliar parts were examined based on their year of expansion and location in each trees. The radiocesium concentrations generally decreased with time; however, the concentrations and rates of decrease varied among species, age of foliar parts, and locations. The radiocesium concentrations in the 2012 current-year foliar parts were 29%-220% of those from 2011, while those from 2013 fell to between 14% and 42% of the 2011 values. The net decontamination in the foliage was higher in evergreen species than in deciduous species. The radiocesium concentrations in the upper foliar parts were higher than those in the lower parts particularly in C. japonica. In addition, the radiocesium concentrations were higher in the current-year foliar parts than in the 1-year-old foliar parts, particularly in 2013. Thus, the influence of the direct deposition of the fallout was reduced with time, and the translocation ability of radiocesium from old to new tissues became more influential. Similar to the behavior of potassium in trees, Cs redistribution probably occurred primarily due to internal nutrient translocation mechanisms. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Temporal variations of the fractal properties of seismicity in the western part of the north Anatolian fault zone: possible artifacts due to improvements in station coverage

Directory of Open Access Journals (Sweden)

A. O. Öncel

1995-01-01

Full Text Available Seismically-active fault zones are complex natural systems exhibiting scale-invariant or fractal correlation between earthquakes in space and time, and a power-law scaling of fault length or earthquake source dimension consistent with the exponent b of the Gutenberg-Richter frequency-magnitude relation. The fractal dimension of seismicity is a measure of the degree of both the heterogeneity of the process (whether fixed or self-generated and the clustering of seismic activity. Temporal variations of the b-value and the two-point fractal (correlation dimension Dc have been related to the preparation process for natural earthquakes and rock fracture in the laboratory These statistical scaling properties of seismicity may therefore have the potential at least to be sensitive short- term predictors of major earthquakes. The North Anatolian Fault Zone (NAFZ is a seismicallyactive dextral strike slip fault zone which forms the northern boundary of the westward moving Anatolian plate. It is splayed into three branches at about 31oE and continues westward toward the northern Aegean sea. In this study, we investigate the temporal variation of Dc and the Gutenberg-Richter b-value for seismicity in the western part of the NAFZ (including the northern Aegean sea for earthquakes of Ms > 4.5 occurring in the period between 1900 and 1992. b ranges from 0.6-1.6 and Dc from 0.6 to 1.4. The b-value is found to be weakly negatively correlated with Dc (r=-0.56. However the (log of event rate N is positively correlated with b, with a similar degree of statistical significance (r=0.42, and negatively correlated with Dc (r=-0.48. Since N increases dramatically with improved station coverage since 1970, the observed negative correlation between b and Dc is therefore more likely to be due to this effect than any underlying physical process in this case. We present this as an example of how man-made artefacts of recording can have similar statistical effects to

Commonsense in parts : Mining part-whole relations from theweb and image tags

NARCIS (Netherlands)

Tandon, Niket; Hariman, Charles; Urbani, Jacopo; Rohrbach, Anna; Rohrbach, Marcus; Weikum, Gerhard

2016-01-01

Commonsense knowledge about part-whole relations (e.g., screen partOf notebook) is important for interpreting user input in web search and question answering, or for object detection in images. Prior work on knowledge base construction has compiled part-whole assertions, but with substantial

Isolation and Molecular Profiling of Primary Mouse Retinal Ganglion Cells: Comparison of Phenotypes from Healthy and Glaucomatous Retinas

OpenAIRE

Chintalapudi, Sumana R.; Djenderedjian, Levon; Stiemke, Andrew B.; Steinle, Jena J.; Jablonski, Monica M.; Morales-Tirado, Vanessa M.

2016-01-01

Loss of functional retinal ganglion cells (RGC) is an element of retinal degeneration that is poorly understood. This is in part due to the lack of a reliable and validated protocol for the isolation of primary RGCs. Here we optimize a feasible, reproducible, standardized flow cytometry-based protocol for the isolation and enrichment of homogeneous RGC with the Thy1.2hiCD48negCD15negCD57neg surface phenotype. A three-step validation process was performed by: (1) genomic profiling of 25-genes ...

21 CFR 60.36 - Standard of due diligence.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Standard of due diligence. 60.36 Section 60.36... TERM RESTORATION Due Diligence Petitions § 60.36 Standard of due diligence. (a) In determining the due diligence of an applicant, FDA will examine the facts and circumstances of the applicant's actions during...

Advanced Technologies For Heterodyne Radio Astronomy Instrumentation - Part1 By A. Pavolotsky, And Advanced Technologies For Heterodyne Radio Astronomy Instrumentation - Part2 By V. Desmaris

Science.gov (United States)

Pavolotsky, Alexey

2018-01-01

Modern and future heterodyne radio astronomy instrumentation critically depends on availability of advanced fabrication technologies and components. In Part1 of the Poster, we present the thin film fabrication process for SIS mixer receivers, utilizing either AlOx, or AlN barrier superconducting tunnel junctions developed and supported by GARD. The summary of the process design rules is presented. It is well known that performance of waveguide mixer components critically depends on accuracy of their geometrical dimensions. At GARD, all critical mechanical parts are 3D-mapped with a sub-um accuracy. Further progress of heterodyne instrumentation requires new efficient and compact sources of LO signal. We present SIS-based frequency multiplier, which could become a new option for LO source. Future radio astronomy THz receivers will need waveguide components, which fabricating due to their tiny dimensions is not feasible by traditional mechanical machining. We present the alternative micromachining technique for fabricating waveguide component for up 5 THz band and probably beyond.

Peritoneal tuberculosis due to Mycobacterium caprae

Directory of Open Access Journals (Sweden)

T. Nebreda

2016-01-01

Full Text Available The incidence of tuberculosis in humans due to Mycobacterium caprae is very low and is almost confined to Europe. We report a case of a previously healthy 41-year-old Moroccan with a 6 month history of abdominal pain, weight loss, fatigue and diarrhea. A diagnosis of peritoneal tuberculosis due to M. caprae was made.

Acute nicotine induced pressor response is in part due to interaction ...

African Journals Online (AJOL)

Arterial baro-reception is regarded as one of the most powerful rapidly acting homeostatic mechanism regulating blood pressure. Investigation had suggested that nicotine may interact with aortic baro-receptors to produce its sustained presser response, an effect that had received little attention. Anaesthetized Wister albino ...

Soil Acidification due to Acid Deposition in Southern China

Energy Technology Data Exchange (ETDEWEB)

Liao, Bohan

1999-12-31

Anthropogenic emission of SO{sub 2} and NO{sub x} to the atmosphere has made acid deposition one of the most serious environmental problems. In China, acid deposition research started in the late 1970s. The present thesis is part of a joint Chinese-Norwegian research project. The main goal of the thesis was to investigate the mechanism of soil acidification, to estimate soil responses to acid deposition, and to compare relative soil sensitivity to acidification in southern China. Laboratory experiments and modelling simulations were included. Specifically, the thesis (1) studies the characteristics of anion adsorption and cation release of the soils from southern China, (2) examines the effects of increased ionic strength in the precipitation and the effects of anion adsorption on cation release from the soils, (3) compares the relative sensitivity of these soils to acidification and the potentially harmful effects of acid deposition, (4) estimates likely soil responses to different deposition scenarios, including changes in soil waters and soil properties, and (5) investigates long-term changes in soils and soil waters in the Guiyang catchment due to acid deposition. 218 refs., 31 figs., 23 tabs.

Soil Acidification due to Acid Deposition in Southern China

Energy Technology Data Exchange (ETDEWEB)

Liao, Bohan

1998-12-31

Anthropogenic emission of SO{sub 2} and NO{sub x} to the atmosphere has made acid deposition one of the most serious environmental problems. In China, acid deposition research started in the late 1970s. The present thesis is part of a joint Chinese-Norwegian research project. The main goal of the thesis was to investigate the mechanism of soil acidification, to estimate soil responses to acid deposition, and to compare relative soil sensitivity to acidification in southern China. Laboratory experiments and modelling simulations were included. Specifically, the thesis (1) studies the characteristics of anion adsorption and cation release of the soils from southern China, (2) examines the effects of increased ionic strength in the precipitation and the effects of anion adsorption on cation release from the soils, (3) compares the relative sensitivity of these soils to acidification and the potentially harmful effects of acid deposition, (4) estimates likely soil responses to different deposition scenarios, including changes in soil waters and soil properties, and (5) investigates long-term changes in soils and soil waters in the Guiyang catchment due to acid deposition. 218 refs., 31 figs., 23 tabs.

Hospitalization due to horse-related injuries: has anything changed? A 25 year survey.

Science.gov (United States)

Abu-Kishk, Ibrahim; Klin, Baruch; Gilady-Doron, Nataly; Jeroukhimov, Igor; Eshel, Gideon

2013-04-01

Horse riding and horse handling are dangerous. There is a lack of knowledge concerning the incidence of hospitalization due to horse-related injuries and types of injuries in Israel. During the last two decades we have observed an increasing incidence of hospitalizations due to horse-related injuries at our medical center as well as the frequent involvement of pediatric patients. To investigate these injuries with respect to type, incidence and modes of prevention. We conducted a retrospective study of medical records for all patients admitted to Assaf Harofeh Medical Center due to horse-related injury between January 1984 and December 2008. A telephone questionnaire was used to complete the data. Eighty-nine subjects (267 injuries) were included in the study. Most of them were not professional horse riders or horse handlers. Helmet use was reported in only 28% of the participants. The number of subjects with horse-related injuries and the percentage of pediatric involvement increased during the study period. Falling from a horse was the most frequent cause of injury (60.67%), followed by being kicked (13.4%). Head and extremities were the most affected areas. On admission, 33.7% had a potential severe injury score. Forty-two participants (47%) had underlying fractures, mostly in the upper extremities. In the pediatric population, 16.2% (vs. 0% adults) rode horses for therapeutic reasons. Seventeen subjects reported having long-term consequences. The findings are similar to those described in other parts of the world. Horseback riding-related injuries are increasing, which emphasizes the need for safety education programs in Israel.

Mineral trioxide aggregate: part 2 - a review of the material aspects.

Science.gov (United States)

Malhotra, Neeraj; Agarwal, Antara; Mala, Kundabala

2013-03-01

The purpose of this two-part series is to review the composition, properties, and products of mineral trioxide aggregate (MTA) materials. PubMed and MedLine electronic databases were used to identify scientific papers from January 1991 to May 2010. Based on the selected inclusion criteria, citations were referenced from the scientific peer-reviewed dental literature. Mineral trioxide aggregate is a refined form of the parent compound, Portland cement (PC), and demonstrates a strong biocompatibility due to the high pH level and the material's ability to form hydroxyapatite. Mineral trioxide aggregate materials provide better microleakage protection than traditional endodontic materials as observed in findings from dye-leakage, fluid-filtration, protein-leakage, and bacterial penetration-leakage studies and has been recognized as a bioactive material. Various MTA commercial products are available, including gray mineral trioxide aggregate (GMTA), white mineral trioxide aggregate (WMTA), and mineral trioxide aggregate-Angelus (AMTA). Although these materials are indicated for various dental uses and applications, long-term in-vivo clinical studies are needed. Part 1 of this article highlighted and discussed the composition and characteristics of the material. Part 2 provides an overview of commercially available MTA materials.

14 CFR 119.65 - Management personnel required for operations conducted under part 121 of this chapter.

Science.gov (United States)

2010-01-01

... or Part 135 of This Chapter § 119.65 Management personnel required for operations conducted under... of management personnel due to— (1) The kind of operation involved; (2) The number and type of... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Management personnel required for...

14 CFR 119.69 - Management personnel required for operations conducted under part 135 of this chapter.

Science.gov (United States)

2010-01-01

... or Part 135 of This Chapter § 119.69 Management personnel required for operations conducted under... of management personnel due to— (1) The kind of operation involved; (2) The number and type of... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Management personnel required for...

Information security risk management and incompatible parts of organization

Directory of Open Access Journals (Sweden)

Elham Talabeigi

2016-11-01

Full Text Available Purpose: we prepared a questionnaire to evaluate Incompatible parts and also risk management in University of Science and Technology E-Learning Center and studying the Incompatible parts impacts on utility of organization. Design/methodology/approach: By using coalitional game theory we present a new model to recognize the degrees of incompatibility among independent divisions of an organization with dependent security assets. Based on positive and negative interdependencies in the parts, the model provides how the organization can decrease the security risks through non-cooperation rather than cooperation. we implement the proposed model of this paper by analyzing the data which have been provided by questionnaires from different three managers' ideas of Iran University of Science and Technology E-Learning Center located in Iran University of Science and Technology, Tehran, Iran. Findings: In general, by collecting data and analyzing them, the survey showed that Incompatible parts of organizations have negative impacts on utility of organization risk management process. Furthermore, it adds values to other organizations and provides the best practices in planning, developing, implementing and monitoring risk management in organizations. Research limitations/implications: Since Information security and also Risk Management are still areas which need to improve in some Iranian universities, we couldn’t consider them in our analysis. On the other hand, due to questionnaire limitation, the study’s sample size is 1. This size may be considered large for our statistical analysis. Originality/value:  The main contribution of this paper is to propose a model for non-cooperation among a number of divisions in a organization and using risk management factors.

Chirped Auger electron emission due to field-assisted post-collision interaction

Directory of Open Access Journals (Sweden)

Bonitz M.

2013-03-01

Full Text Available We have investigated the Auger decay in the temporal domain by applying a terahertz streaking light field. Xenon and krypton atoms were studied by implementing the free-electron laser in Hamburg (FLASH as well as a source of high-order harmonic radiation combined with terahertz pulses from an optical rectification source. The observed linewidth asymmetries in the streaked spectra suggest a chirped Auger electron emission which is understood in terms of field-assisted post-collision interaction. The experimentally obtained results agree well with model calculations.

Alveolar Soft Part Sarcoma Presenting as Hypervascular Adrenal Metastasis

Science.gov (United States)

Goroshi, Manjunath; Lila, Anurag R.; Bandgar, Tushar; Shah, Nalini S.

2018-01-01

Hypervascular adrenal masses include pheochromocytoma, metastases caused by clear renal cell carcinoma/hepatocellular carcinoma. Alveolar soft part sarcoma (ASPS) causing hypervascular metastases is not described in the literature. Here, we describe the first case of ASPS presenting as hypervascular metastasis. Our case was a 23-year-old male incidentally detected right adrenal mass during the evaluation of pain in the abdomen. On computed tomography (CT), adrenal mass showed bright enhancement in early arterial phase (unenhanced Hounsfield unit [HU]-45.3; arterial phase HU-158.2). 18- flurodeoxyglucose positron emission tomography/CT showed multiple lesions and was confirmed histologically to be due to ASPS. PMID:29398970

Patterns and trends in injuries due to chemicals based on OSHA occupational injury and illness statistics

Energy Technology Data Exchange (ETDEWEB)

Mannan, M. Sam [Mary Kay O' Connor Process Safety Center, Chemical Engineering Department, Texas A and M University System, College Station, TX 77843-3122 (United States)], E-mail: mannan@tamu.edu; O' Connor, T. Michael [Mary Kay O' Connor Process Safety Center, Chemical Engineering Department, Texas A and M University System, College Station, TX 77843-3122 (United States); Keren, Nir [Department of Agriculture and Biosystems Engineering, 102 Industrial Education Building II, Iowa State University, Ames, IA 50011-3130 (United States)

2009-04-15

The Occupational Safety and Health Administration (OSHA) and the Bureau of Labor Statistics (BLS) provide the Survey of Occupational Illness and Injury (SOII) statistics from 1992 to 2006, which is often used to measure the rate of injuries and illness in industry. The present system of gathering and classifying this data was implemented in 1992 with minor changes in 2002. It is hoped that using these statistics to measure safety progress and determine patterns of injury will guide further improvements in chemical safety. Recognizing such factors as what chemicals most frequently cause injury can help to focus safety efforts regarding that chemical. Factors such as what part of the body is most commonly affected by particular chemicals can lead to improved personnel protection practices. This paper provides a detailed analysis of injuries due to chemicals using OSHA's SOII data, which offers valuable insight into measures that should be taken to reduce injuries due to chemicals.

Patterns and trends in injuries due to chemicals based on OSHA occupational injury and illness statistics

International Nuclear Information System (INIS)

Mannan, M. Sam; O'Connor, T. Michael; Keren, Nir

2009-01-01

The Occupational Safety and Health Administration (OSHA) and the Bureau of Labor Statistics (BLS) provide the Survey of Occupational Illness and Injury (SOII) statistics from 1992 to 2006, which is often used to measure the rate of injuries and illness in industry. The present system of gathering and classifying this data was implemented in 1992 with minor changes in 2002. It is hoped that using these statistics to measure safety progress and determine patterns of injury will guide further improvements in chemical safety. Recognizing such factors as what chemicals most frequently cause injury can help to focus safety efforts regarding that chemical. Factors such as what part of the body is most commonly affected by particular chemicals can lead to improved personnel protection practices. This paper provides a detailed analysis of injuries due to chemicals using OSHA's SOII data, which offers valuable insight into measures that should be taken to reduce injuries due to chemicals

Fostering design for avoiding small parts in commonly used objects.

Science.gov (United States)

de Koning, Ton; Foltran, Francesca; Gregori, Dario

2012-05-14

Injuries due to the accidental ingestion or aspiration of small parts have became a matter of interest in the last 30 years, focusing on the relationship between a proper prevention and the diminished frequency of occurrences. Small parts in commonly used objects represent a large sector of potential danger, taking explicit mouthing behavior of children in the first four years of life. In this paper the intent is to show the current situation of design projects and legislation around the world, meant to avoid the casual accidents due to manufacturing reasons. Proposed process and quality control standards seek to eliminate production errors and control materials to avoid deviation from the design. The present study draws its data from the Susy Safe registry, a European Commission co-funded project started in February 2005, whose aim is to establish an international registry of cases of Foreign Bodies (FB) injuries in children aged 0-14 years. Information collected from the data base concern age and gender of the child, location, shape, volume, consistency and elipticity of the foreign body, any complication occurred, hospitalization, and behavioral aspects linked to the injury, like the supervision of the parents or the activity concomitant to the injury. Cases are prospectively collected using the Susy Safe system from 06/2005; moreover, also information regarding past consecutive cases available in each center adhering to the project have been entered in the Susy Safe Registry. Data evidenced that the majority of small parts related injuries are related to stationery. The majority of objects (56.7%), were located in the nose, followed by the ears (31.5%). The distribution on incidence of FB injuries by age class shows that the majority of injuries due to small parts in common objects occurred in children older than >3 years. Male and female were affected with the same frequency when concerning the nose, while all other locations showed a higher frequency in males

Embrittlement recovery due to annealing of reactor pressure vessel steels

International Nuclear Information System (INIS)

Eason, E.D.; Wright, J.E.; Nelson, E.E.; Odette, G.R.; Mader, E.V.

1998-01-01

The irradiation embrittlement of nuclear reactor pressure vessels (RPV) can be reduced by thermal annealing at temperatures higher than the normal operating conditions. The objective of this work was to analyze the pertinent data and develop quantitative models for estimating the recovery in 41 J (30 ft-lb) Charpy transition temperature (TT) and Charpy upper shelf energy (USE) due to annealing. An analysis data base was developed, reviewed for completeness and accuracy, and documented as part of this work. Models were developed based on a combination of statistical techniques, including pattern recognition and transformation analysis, and the current understanding of the mechanisms governing embrittlement and recovery. The quality of models fitted in this project was evaluated by considering both the Charpy annealing data used for fitting and a surrogate hardness data base. This work demonstrates that microhardness recovery is a good surrogate for shift recovery and that there is a high level of consistency between the observed annealing trends and fundamental models of embrittlement and recovery processes. (orig.)

Self-amplified Amazon forest loss due to vegetation-atmosphere feedbacks

Science.gov (United States)

Zemp, Delphine Clara; Schleussner, Carl-Friedrich; Barbosa, Henrique M. J.; Hirota, Marina; Montade, Vincent; Sampaio, Gilvan; Staal, Arie; Wang-Erlandsson, Lan; Rammig, Anja

2017-03-01

Reduced rainfall increases the risk of forest dieback, while in return forest loss might intensify regional droughts. The consequences of this vegetation-atmosphere feedback for the stability of the Amazon forest are still unclear. Here we show that the risk of self-amplified Amazon forest loss increases nonlinearly with dry-season intensification. We apply a novel complex-network approach, in which Amazon forest patches are linked by observation-based atmospheric water fluxes. Our results suggest that the risk of self-amplified forest loss is reduced with increasing heterogeneity in the response of forest patches to reduced rainfall. Under dry-season Amazonian rainfall reductions, comparable to Last Glacial Maximum conditions, additional forest loss due to self-amplified effects occurs in 10-13% of the Amazon basin. Although our findings do not indicate that the projected rainfall changes for the end of the twenty-first century will lead to complete Amazon dieback, they suggest that frequent extreme drought events have the potential to destabilize large parts of the Amazon forest.

Vibrations of composite circular shell structures due to transient loads

International Nuclear Information System (INIS)

Schrader, K.-H.; Krutzik, N.; Winkel, G.

1975-01-01

Referring to a container consisting of different shell structures - such as spherical, cylindrical and conical shells - the dynamic behavior of coupled spatial shell structures due to transient loads will be investigated. The spatial structure including the filling of water will be idealized as a three-dimensional model consisting of ring elements. The influence of the water filling on the vibrations will be considered by virtual masses added to the shell structures. In circular direction as well as in meridional direction a consistent mass model has been used. By variation of the virtual masses it will be clarified, how these additional masses influence the vibrational behavior of the composed system. Another aspect which will be investigated is the influence of different stiffnesses of substructures or parts of substructures on the natural frequencies, and on their affiliated eigensystems. Furthermore, the maximum and minimum stresses in the structures caused by transient loads acting on the inner surface of the shells will be explored. Here it seems to be possible to locate an area of maximum strain. Rotational loads as well as nonrotational loads will be considered

Traveling-wave piezoelectric linear motor part II: experiment and performance evaluation.

Science.gov (United States)

Ting, Yung; Li, Chun-Chung; Chen, Liang-Chiang; Yang, Chieh-Min

2007-04-01

This article continues the discussion of a traveling-wave piezoelectric linear motor. Part I of this article dealt with the design and analysis of the stator of a traveling-wave piezoelectric linear motor. In this part, the discussion focuses on the structure and modeling of the contact layer and the carriage. In addition, the performance analysis and evaluation of the linear motor also are dealt with in this study. The traveling wave is created by stator, which is constructed by a series of bimorph actuators arranged in a line and connected to form a meander-line structure. Analytical and experimental results of the performance are presented and shown to be almost in agreement. Power losses due to friction and transmission are studied and found to be significant. Compared with other types of linear motors, the motor in this study is capable of supporting heavier loads and provides a larger thrust force.

Otvetshajet Juhan Parts, premjer-ministr / Juhan Parts

Index Scriptorium Estoniae

Parts, Juhan, 1966-

2005-01-01

Peaminister Juhan Parts selgitab Res Publica ja valitsuse korruptsioonivastast poliitikat ning loodab, et justiitsminister Ken-Marti Vaheri pakutud strateegia võitluses korruptsiooniga ei saa koalitsiooni lagunemise põhjuseks

Elemental and mineralogical changes in soils due to bioturbation along an earthworm invasion chronosequence in Northern Minnesota

International Nuclear Information System (INIS)

Resner, Kathryn; Yoo, Kyungsoo; Hale, Cindy; Aufdenkampe, Anthony; Blum, Alex; Sebestyen, Stephen

2011-01-01

Minnesota forested soils have evolved without the presence of earthworms since the last glacial retreat. When exotic earthworms arrive, enhanced soil bioturbation often results in dramatic morphological and chemical changes in soils with negative implications for the forests' sustainability. However, the impacts of earthworm invasion on geochemical processes in soils are not well understood. This study attempts to quantify the role of earthworm invasion in mineral chemical weathering and nutrient dynamics along an earthworm invasion chronosequence in a sugar maple forest in Northern Minnesota. Depth and rates of soil mixing can be tracked with atmospherically derived short lived radioisotopes 210 Pb and 137 Cs. Their radioactivities increase in the lower A horizon at the expense of the peak activities near the soil surface, which indicate that soil mixing rate and its depth reach have been enhanced by earthworms. Enhanced soil mixing by earthworms is consistent with the ways that the vertical profiles of elemental and mineralogical compositions were affected by earthworm invasion. Biologically cycled Ca and P have peak concentrations near the soil surface prior to earthworm invasion. However, these peak abundances significantly declined in the earthworm invaded soils presumably due to enhanced soil mixing. It is clear that enhanced soil mixing due to earthworms also profoundly altered the vertical distribution of most mineral species within A horizons. Though the mechanisms are not clear yet, earthworm invasion appears to have contributed to net losses of clay mineral species and opal from the A horizons. As much as earthworms vertically relocated minerals and elements, they also intensify the contacts between organic matter and cations as shown in the increased amount of Ca and Fe in organically complexed and in exchangeable pools. With future studies on soil mixing rates and elemental leaching, this study will quantitatively and mechanically address the role of

Part-Time Faculty Satisfaction at Two-Year Public Postsecondary Institutions: A Comparison of Involuntary Part-Time, Voluntary Part-Time, and Full-Time Faculty

Science.gov (United States)

Kinchen, Nancy Huval

2010-01-01

Part-time faculty members represent the majority of faculty at public two-year postsecondary institutions. Utilizing part-time faculty enables two-year institutions to control their instructional costs and maintain scheduling flexibility. However, part-time faculty are diverse in regards to their employment preference, some prefer part-time…

Review on progressive microforming of bulk metal parts directly using sheet metals (Keynote Paper

Directory of Open Access Journals (Sweden)

Fu M.W.

2015-01-01

Full Text Available Due to the ubiquitous trend of product miniaturization, energy saving and weight reduction, micro/meso-scale parts have been widely used in many industrial clusters. Micromanufacturing processes for production of such micro/meso-scale parts are thus critically needed. Microforming, as one of these micro manufacturing processes, is a promising process and thus got many explorations and researches. Compared with the research on size effect affected deformation behaviours, less attention has been paid to the process development for mass production of micro-parts. The product quality and fabrication productivity of micro-parts depend on the involved process chain. To address the difficulty in handling and transporting of the micro-sized workpiece, development of a progressive microforming process for directly fabricating bulk micro-parts using sheet metals seems quite promising as it avoids or facilitates billet handling, transportation, positioning, and ejection in the process chain. In this paper, an intensive review on the latest development of progressive microforming technologies is presented. First of all, the paper summarizes the characteristic of progressive microforming directly using sheet metal. The size effect-affected deformation behaviour and the dimensional accuracy, deformation load, ductile fracture, and the surface finish of the microformed parts by progressive microforming using sheet metals are then presented. Finally, some research issues from the implementation of mass production perspective are also discussed.

Part-time employment in Jordan as a nursing policy solution.

Science.gov (United States)

Al-Motlaq, M; Azar, N; Squires, A

2017-03-01

Explore the potential of a part-time work option for nurses as a strategy for managing domestic markets in Jordan by examining perceptions of working nurses and nursing students in the context of current social and cultural variables. Unemployment among Jordanian nurses has become a reality in recent years. However, labor markets literature in nursing rarely studies what kind of policy responses should occur during a surplus of nurses. A cross-sectional design structured the study. The perceptions of nurses and students were measured through a questionnaire developed specifically for the purpose of this exploratory study. Both nurses (n = 51) and students (n = 56) supported the introduction of the new suggested part-time option. However, students were more willing to start working or transfer into part-time work, take payment on hourly basis, and support colleagues to transfer into part-time work. Different solutions were also suggested by participants. The results were useful for providing the foundational data to further study the viability of a part-time work option for Jordanian nurses. The results show how optimistic current and future Jordanian nurses are regarding this employment option. For countries that may need to diversify their employment models due to excess supply of nurses and to address gender imbalances, this work may help inform policy development. Both employed and unemployed nurses will benefit if health care managers consider its application. The flexibility of this option may help improve the quality of life of many nurses. The results of this study provide nursing leaders and managers with foundational evidence that may be applicable in the Jordanian health sector. Although further studies are recommended, nursing leaders and policy makers should consider such a solution. © 2016 International Council of Nurses.

Diagnostic value of MRI for nerve root compression due to lumbar canal stenosis. Clinical and anatomic study

International Nuclear Information System (INIS)

Seki, Michihiro; Kikuchi, Shinichi; Kageyama, Kazuhiro; Katakura, Toshihiko; Suzuki, Kenji

1995-01-01

Magnetic resonance imaging (MRI) was undertaken in 26 patients with surgically proven nerve root compression due to lumbar canal stenosis. The findings on coronary images were compared with those of selective radiculography to assess the diagnostic ability of MRI to determine the site of nerve root compression. Intermission and partial defect, which reflect nerve root compression, were seen in only 5 (19.2%) of 26 nerve roots on MRI, as compared with 20 (76.9%) on radiculography. Thus MRI alone was difficult to diagnose nerve root compression due to lumbar canal stenosis. Furthermore, the optimum angle of coronary views was determined in 13 cadavers. Para-sagittal views were found to be optimal for the observation of the whole running of the nerve root. Three-dimensional MRI was found to have a potential to diagnose nerve root compression in the intervertebral foramen and the distal part of the intervertebral foramen. (N.K.)

Quantum-chemical studies of quasi-one-dimensional electron systems. Part 2. Cumulenes and origin of the forbidden zone

Directory of Open Access Journals (Sweden)

Yuriy Kruglyak

2015-06-01

Full Text Available This review is devoted to the basic problem in quantum theory of quasi-one-dimensional electron systems like polyenes (Part 1 and cumulenes (Part 2 – physical origin of the forbidden zone in these and analogous 1D electron systems due to two possible effects – Peierls instability (bond alternation and Mott instability (electron correlation. Both possible contradiction and coexistence of the Mott and Peierls instabilities are summerized on the basis of the Kiev quantum chemistry team research projects.

Strangulated small bowel gangrene due to torsioned gangrenous appendix in an old man: a case report

Directory of Open Access Journals (Sweden)

Ardavan Shahbazi

2016-11-01

Full Text Available Background: Torsion of the appendix is a rare entity and divided into two categories: primary and secondary. The primary mode is due to an abnormality in either appendix anatomy or its meso or both and is more common in children. The secondary forms happen in adults which can be associated with appendiceal tumor, appendiceal mucocele, fecal impaction, volvulus of ovarian cyctadenoma. Adynamic small bowel obstruction or ileus is seen frequently with all forms of peritoneal inflammation. However, Anatomical small intestinal obstruction or gangrene due to torsioned appendix is a rare condition and few cases reported in the literature. Method: Here we have a 83-year-old man patient with small bowel obstruction and localized right lower quadrant peritonitis who undergo emergency laparotomy to eliminate small bowel obstruction and peritonitis. Preoperative abdominal radiography showed multiple dilated small bowel loops with empty colon. Results: During exploration necrosis of the terminal 40cm of the ileum due to a twisted and gangrenous appendix was discovered. Other parts were normal. Conclusion: it may be useful to recommend early midline exploratory laparotomy for patients with small bowel obstruction even in the presence symptoms of local appendicitis. This operation can be both diagnostic and therapeutic.

The Substantive and Procedural Due Process Rights of Students Accused of Criminal Behavior in School and the Educational Rights of Adjudicated Youths.

Science.gov (United States)

Brown, Frank

This paper--part of a collection of 54 papers from the 48th annual conference of the Education Law Association held in November 2002-- addresses juvenile justice. Its central issue is how to protect children of color in elementary and secondary schools with constitutional due process where attendance is compulsory and, at the same time, maintain a…

NASA EEE Parts and NASA Electronic Parts and Packaging (NEPP) Program Update 2018

Science.gov (United States)

Label, Kenneth A.; Sampson, Michael J.; Pellish, Jonathan A.; Majewicz, Peter J.

2018-01-01

NASA Electronic Parts and Packaging (NEPP) Program and NASA Electronic Parts Assurance Group (NEPAG) are NASAs point-of-contacts for reliability and radiation tolerance of EEE parts and their packages. This presentation includes an FY18 program overview.

Evolution and failure of liquid bridges between grains due to evaporation and due to extension

Science.gov (United States)

Hueckel, T.; Mielniczuk, B.; Said El Youssoufi, M.

2012-04-01

Evolution and rupture of liquid bridges between glass spheres during liquid evaporation and during mechanical extension was examined. The latter type of the tests has been widely studied, while a number of pertinent measurements during transient evaporation have not yet been reported. Also the resultant total capillary forces were measured and geometrical characteristics (curvature radii)were recorded with a photo camera and high-speed camera and subsequently digitalized. The obtained results reveal substantial differences in geometry of liquid bridges during extension and evaporation. On the other hand, evaporation and extension of liquid bridgelead to a similar qualitative response in terms of the pressure within the liquid bridge, starting with a significant suction, which initially somewhat increases during evaporation to reach a maximum, followed by a rapid monotonic decrease until zero, to become a sizable positive pressure prior to rupture. Extension same pattern is followed, except that there is no initial suction increase. Hence, in both cases, rupture consistently occurs at a positive fluid pressure. The pressure evolution is a simple resultant of the evolution of radii of curvature, with the neck radius becoming smaller than meridian radius. In terms of resultant capillary force, as the area of the bridge cross-section decreases with the square of the neck radius, the pressure difference is almost entirely negative, in part also due to surface tension component. Nevertheless, the suction decreases nearly monotonically during both processes. Rupture during evaporation of the bridges occurs most abruptly for larger separations, as early as after 25% volume evaporated. It is seen as a bifurcation of the geometry of equilibrium, as demonstrated on a movie with 27, 000 shots per second. The evolution of a bridge between three spheres exhibits a centrally located thin film instability with a circular hole growing within 1/3000th of a second. All these findings

Post-processing of 3D-printed parts using femtosecond and picosecond laser radiation

Science.gov (United States)

Mingareev, Ilya; Gehlich, Nils; Bonhoff, Tobias; Meiners, Wilhelm; Kelbassa, Ingomar; Biermann, Tim; Richardson, Martin C.

2014-03-01

Additive manufacturing, also known as 3D-printing, is a near-net shape manufacturing approach, delivering part geometry that can be considerably affected by various process conditions, heat-induced distortions, solidified melt droplets, partially fused powders, and surface modifications induced by the manufacturing tool motion and processing strategy. High-repetition rate femtosecond and picosecond laser radiation was utilized to improve surface quality of metal parts manufactured by laser additive techniques. Different laser scanning approaches were utilized to increase the ablation efficiency and to reduce the surface roughness while preserving the initial part geometry. We studied post-processing of 3D-shaped parts made of Nickel- and Titanium-base alloys by utilizing Selective Laser Melting (SLM) and Laser Metal Deposition (LMD) as additive manufacturing techniques. Process parameters such as the pulse energy, the number of layers and their spatial separation were varied. Surface processing in several layers was necessary to remove the excessive material, such as individual powder particles, and to reduce the average surface roughness from asdeposited 22-45 μm to a few microns. Due to the ultrafast laser-processing regime and the small heat-affected zone induced in materials, this novel integrated manufacturing approach can be used to post-process parts made of thermally and mechanically sensitive materials, and to attain complex designed shapes with micrometer precision.

Ventral simultanagnosia and prosopagnosia for unfamiliar faces due to a right posterior superior temporal sulcus and angular gyrus lesion.

Science.gov (United States)

Sakurai, Yasuhisa; Hamada, Kensuke; Tsugawa, Naoya; Sugimoto, Izumi

2016-01-01

We report a patient with ventral simultanagnosia, prosopagnosia for "unfamiliar faces" (dorsal prosopagnosia), spatial agraphia, and constructional disorder, particularly on the left spatial side, due to a lesion in the right posterior superior and middle temporal gyri and angular gyrus. The patient showed impairment of fundamental visual and visuospatial recognition, such as in object size, configuration, and horizontal point location, which probably underlay the mechanism of simultanagnosia and prosopagnosia. This case also suggests that the coexistence of simultanagnosia and prosopagnosia results from a right hemispheric insult, and damage to the temporoparietal area interrupts the incorporation of spatial information into object recognition. This disconnection of information flow, together with impaired object recognition per se, may impair the parallel processing of multiple objects, leading to object-by-object or part-by-part recognition.

Tensile Properties Characterization of AlSi10Mg Parts Produced by Direct Metal Laser Sintering via Nested Effects Modeling.

Science.gov (United States)

Palumbo, Biagio; Del Re, Francesco; Martorelli, Massimo; Lanzotti, Antonio; Corrado, Pasquale

2017-02-08

A statistical approach for the characterization of Additive Manufacturing (AM) processes is presented in this paper. Design of Experiments (DOE) and ANalysis of VAriance (ANOVA), both based on Nested Effects Modeling (NEM) technique, are adopted to assess the effect of different laser exposure strategies on physical and mechanical properties of AlSi10Mg parts produced by Direct Metal Laser Sintering (DMLS). Due to the wide industrial interest in AM technologies in many different fields, it is extremely important to ensure high parts performances and productivity. For this aim, the present paper focuses on the evaluation of tensile properties of specimens built with different laser exposure strategies. Two optimal laser parameters settings, in terms of both process quality (part performances) and productivity (part build rate), are identified.

Seizure due to multiple drugs intoxication: a case report

Directory of Open Access Journals (Sweden)

Handan Gulec

2016-11-01

Full Text Available The mechanism of the antidepressant effect of bupropion is not fully understood. Besides, using it in the treatment of depression, it is found to be effective in reducing withdrawal symptoms due to smoking cessation. A 28-year-old female patient with a history of depression was admitted to emergency department an hour after ingestion of bupropion, quetiapine, and levothyroxine in high doses to commit suicide. While accepting her into the Intensive Care Unit, she was awake, alert, disoriented and agitated. After 2 h, the patient had a generalized tonic–clonic seizure. The necessary treatment was given and 9 h later with hemodynamic improvement, the patients’ mental status improved.Bupropion may cause unusual behaviors such as delusions, paranoia, hallucinations, or confusion. The risk of seizure is strongly dose-dependent. We want to emphasize the importance of early gastric lavage and administration of activated charcoal. Resumo: O mecanismo do efeito antidepressivo de bupropiona ainda não está bem esclarecido. Contudo, seu uso no tratamento de depressão revelou ser eficaz para reduzir os sintomas de abstinência relacionados à cessação do tabagismo. Uma paciente do sexo feminino, 28 anos, com história de depressão, deu entrada no setor de emergência uma hora após a ingestão de bupropiona, quetiapina e levotiroxina em doses elevadas para cometer suicídio. Ao ser internada em unidade de terapia intensiva, estava acordada, alerta, desorientada e agitada. Após duas horas, apresentou uma crise tônico-clônica generalizada. O tratamento necessário foi administrado e nove horas mais tarde, com a estabilização hemodinâmica, o estado mental da paciente melhorou.Bupropiona pode causar comportamentos incomuns, incluindo delírios, paranoia, alucinações ou confusão mental. O risco de convulsão é altamente dependente da dose. Queremos enfatizar a importância da lavagem gástrica precoce e da administração de carvão ativado

The prognosis of retinal detachment due to lattice degeneration.

Science.gov (United States)

Benson, W E; Morse, P H

1978-09-01

In a series of 553 consecutive retinal detachments, 29% (120) were due to lattice degeneration. Forty-five percent of these were due to atrophic holes in the lattice degeneration and 55% were due to tears caused by traction posterior to or at the end of a patch of lattice. In phakic patients, retinal detachments due to atrophic holes were most common in young myopes. Detachments due to traction tears were seen in older, less myopic patients. The incidence of massive periretinal proliferation was less (5%) in detachments due to lattice degeneration than in detachments not due to lattice degeneration (6.5%).

Dose due to 40K

International Nuclear Information System (INIS)

Escareno J, E.; Vega C, H. R.

2011-10-01

The dose due to 40 K has been estimated. Potassium is one of the most abundant elements in nature, being approximately 2% of the Earth's crust. Potassium has three isotopes 39 K, 40 K and 41 K, two are stable while 40 K is radioactive with a half life of 1.2x10 9 years; there is 0.0117% 40 K-to-K ratio. Potassium plays an important role in plants, animals and humans growth and reproduction. Due to the fact that K is an essential element for humans, 40 K is the most abundant radioisotope in human body. In order to keep good health conditions K must be intake at daily basis trough food and beverages, however when K in ingested above the requirements produce adverse health effects in persons with renal, cardiac and hypertension problems or suffering diabetes. In 89.3% 40 K decays to 40 C through β-decay, in 10.3% decays through electronic capture and emitting 1.46 MeV γ-ray. K is abundant in soil, construction materials, sand thus γ-rays produced during 40 K decay contribute to external dose. For K in the body practically all 40 K decaying energy is absorbed by the body; thus 40 K contributes to total dose in humans and it is important to evaluate its contribution. In this work a set of 40 K sources were prepared using different amounts of KCl salt, a γ-ray spectrometer with a NaI(Tl) was characterized to standardized the sources in order to evaluate the dose due to 40 K. Using thermoluminescent dosemeters the dose due to 40 K was measured and related to the amount of 40 K γ-ray activity. (Author)

Current status of restoration work for obstacle and upper core structure in reactor vessel of experimental fast reactor 'JOYO'. Recovery of MARICO-2 sample part

International Nuclear Information System (INIS)

Ashida, Takashi; Ito, Hideaki

2015-01-01

At Joyo reactor MK-III core in May 2007, due to the design deficiencies of the disconnect mechanism of the holding part and the sample part of the experimental apparatus with instrumentation lines (MARICO-2), a disconnect failure incident occurred in the sample part after irradiation test. The deformation of the sample part due to this failure incurred its interference with the lower surface of reactor core upper structure and the holddown axis body. By this, the operating range of the rotary plug was restricted, leading to the partial inhibition of the fuel exchange function that precluded the access to 1/4 of the assemblies of the reactor core. In face of restoration work, the preparation for restoration such the exchange of upper core structure, and the recovery of MARICO-2 sample part are under way. The following items are introduced here: (1) summary of restoration work and overall process of restoration work, (2) recovery operation of MARICO-2 sample part, (3) exchange of the upper core structure that was conducted this year, and (4) results of recovery of MARIKO-2 sample part. (A.O.)

Play your part

CERN Document Server

Ramsey, Gaynor

1978-01-01

Play your part is a collection of then situations in which students have to take on the roles of particular people and express their opinions, feelings or arguments about the situation. Play your part is intended for use with advanced students of English.

Effectiveness of early part-time sick leave in musculoskeletal disorders.

Science.gov (United States)

Martimo, Kari-Pekka; Kaila-Kangas, Leena; Kausto, Johanna; Takala, Esa-Pekka; Ketola, Ritva; Riihimäki, Hilkka; Luukkonen, Ritva; Karppinen, Jaro; Miranda, Helena; Viikari-Juntura, Eira

2008-02-25

The importance of staying active instead of bed rest has been acknowledged in the management of musculoskeletal disorders (MSDs). This emphasizes the potential benefits of adjusting work to fit the employee's remaining work ability. Despite part-time sick leave being an official option in many countries, its effectiveness has not been studied yet. We have designed a randomized controlled study to assess the health effects of early part-time sick leave compared to conventional full-day sick leave. Our hypothesis is that if work time is temporarily reduced and work load adjusted at the early stages of disability, employees with MSDs will have less disability days and faster return to regular work duties than employees on a conventional sick leave. The study population will consist of 600 employees, who seek medical advice from an occupational physician due to musculoskeletal pain. The inclusion requires that they have not been on a sick leave for longer than 14 days prior to the visit. Based on the physician's judgement, the severity of the symptoms must indicate a need for conventional sick leave, but the employee is considered to be able to work part-time without any additional risk. Half of the employees are randomly allocated to part-time sick leave group and their work time is reduced by 40-60%, whereas in the control group work load is totally eliminated with conventional sick leave. The main outcomes are the number of days from the initial visit to return to regular work activities, and the total number of sick leave days during 12 and 24 months of follow-up. The costs and benefits as well as the feasibility of early part-time sick leave will also be evaluated. This is the first randomised trial to our knowledge on the effectiveness of early part-time sick leave compared to conventional full-time sick leave in the management of MSDs. The data collection continues until 2011, but preliminary results on the feasibility of part-time sick leave will be available

Molecular biology - Part II: Beneficial liaisons: Radiobiology meets cellular and molecular biology

International Nuclear Information System (INIS)

Stevenson, Mary Ann; Coleman, C. Norman

1997-01-01

Purpose: The purpose of this course is to familiarize radiation oncologists with the concepts and terminology of molecular and cellular biology that are especially relevant to radiation oncology. The ability of radiation oncologists to remain current with the new discoveries of modern biology is essential to the development of improved therapeutic strategies and, importantly, to the proper balance between investment in technology and biology. Objective: This year, this Refresher Course is part of a three-part ''series'' including Drs. McKenna and Dritschilo. The objective is to provide continuing education for the academic and practicing radiation oncologist, physicist and biologist in the modern biologic concepts of cancer and its treatment. An effort will be made to relate these general concepts to the clinic by providing a broad view as to potential new biological treatments which might enhance the efficacy of radiation therapy. The specific focus of this Course will vary from year to year. Some of the classic radiation biology models which form the basis of clinical practice and laboratory research will be examined and 'newer' models will be presented which take into account the emerging knowledge of cellular and molecular biology. A few techniques in molecular and cellular biology will be described to the extent necessary to understand their basic concepts and their applicability. Aspects of radiation biology which will be covered include cell cycle, radiation-induced changes in the cellular phenotype, and considerations of the effect of the tumor microenvironment. It is not the expectation that the attendees will become experts in the particular subjects presented. Rather, it is the intent to increase their curiosity as to the new knowledge that is emerging and to demonstrate that these seemingly complicated areas can be understood and appreciated with a modicum of the effort

Molecular biology - Part II: Beneficial liaisons: Radiobiology meets cellular and molecular biology

International Nuclear Information System (INIS)

Stevenson, Mary Ann; Coleman, C. Norman

1996-01-01

Purpose: The purpose of this course is to familiarize radiation oncologists with the concepts and terminology of molecular and cellular biology that are especially relevant to radiation oncology. The ability of radiation oncologists to remain current with the new discoveries of modern biology is essential to the development of improved therapeutic strategies and, importantly, to the proper balance between investment in technology and biology. Objective: This year, this Refresher Course is part of a three-part 'series' including Drs. Martin Brown and Amato Giaccia. The objective is to provide continuing education for the academic and practicing radiation oncologist, physicist and biologist in the modern biologic concepts of cancer and its treatment. An effort will be made to relate these general concepts to the clinic by providing a broad view as to potential new biological treatments which might enhance the efficacy of radiation therapy. The specific focus of this Course will vary from year to year. Some of the classic radiation biology models which form the basis of clinical practice and laboratory research will be examined and 'newer' models will be presented which take into account the emerging knowledge of cellular and molecular biology. A few techniques in molecular and cellular biology will be described to the extent necessary to understand their basic concepts and their applicability. Aspects of radiation biology which will be covered include cell cycle, radiation-induced changes in the cellular phenotype, and considerations of the effect of the tumor microenvironment. It is not the expectation that the attendees will become experts in the particular subjects presented. Rather, it is the intent to increase their curiosity as to the new knowledge that is emerging and to demonstrate that these seemingly complicated areas can be understood and appreciated with a modicum of the effort

Brand-name drug, generic drug, orphan drug. Pharmacological therapy with biosimilar drugs - provision of due diligence in the treatment process.

Science.gov (United States)

Zajdel, Justyna; Zajdel, Radosław

2013-01-01

Due diligence in the process of provision of healthcare services refers, among other elements, to the application of pharmacological therapy at a time which offers the greatest chance for a successful outcome of treatment, i.e. for achieving the optimum expected effect understood as an improvement in the patient's health, reduction of health risks or elimination of the disease. However, due diligence may also refer to actions aimed at ensuring that neither the patient nor the healthcare payer is required to incur unreasonable costs in the process of treatment. The validity of that statement stems not only from normative acts but also from ethical standards laid down in the Medical Code of Ethics (Article 57 section 2). It often happens that the provision of optimal treatment calls for deviations from the formal provisions included in Summary Product Characteristics (SPCs), and the application of drugs that are bioequivalent to reference drugs, which translates into a significant reduction of costs. The present study addresses the problem of acceptability of a specific form of drug substitution consisting in the replacement of a reference drug with a generic drug. Also explored are legal aspects associated with the possibility of therapy based on "off-label use". The study reviews normative acts existing in the Polish and EU legislation. It also provides a clear definition of orphan drug, which has made it possible to make a distinction and investigate mutual relations between the concepts of brand-name (reference) drug, orphan drug and generic drug.

The sin in the aetiological concept of Johann Christian August Heinroth (1773-1843). Part 1: Between theology and psychiatry. Heinroth's concepts of 'whose being', 'freedom', 'reason' and 'disturbance of the soul'.

Science.gov (United States)

Steinberg, Holger

2004-09-01

Throughout his work Johann Christian August Heinroth regarded sin to be the cause of mental illness. The present two-part paper investigates what exactly Heinroth understood by sin. Based on a thorough analysis of his own texts, this study shows that on the one hand Heinroth referred to sin in a Christian-Protestant sense. On the other, however, a moral-ethical code of conduct was also involved. Thus, Heinroth did not regard sin as a singular event, but rather as a life conducted in a wrong way for years or even decades, by which he meant a steady striving towards earthly, bodily satisfaction.

Contemporary suspended sediment yield of a partly glaciated catchment, Riffler Bach (Tyrol, Austria)

Science.gov (United States)

Weber, Martin; Baewert, Henning; Morche, David

2015-04-01

Due to glacier retreat since the LIA (Little Ice Age) proglacial areas in high mountain landscapes are growing. These systems are characterized by a high geomorphological activity, especially in the fluvial subsystem. Despite the long tradition of geomorphological research in the European Alps there is a still a lack of understanding in the interactions between hydrology, sediment sources, sediments sinks and suspended sediment transport. As emphasized by ORWIN ET AL. (2010) those problems can be solved by gathering data in a higher frequency and/or in a higher spatial resolution or density - both leading to a big amount of data. In 2012 a gauging station was installed at the outlet of the partly glaciated catchment of the Riffler Bach (Kaunertal valley, Tyrol). During the ablation seasons in 2012 and 2013 water stage was logged automatically every 15 minutes. In both seasons discharge was measured at different water levels to calculate a stage-discharge relation. Additionally, water samples were taken by an automatic water sampler. Within 16 sampling cycles with sampling frequencies ranging from 1 to 24 hours 389 water samples have been collected. The samples were filtered to calculate the suspended sediment concentration (SSC) of each sample. Furthermore, the climate station Weißsee provided meteorological data at a 15 minute interval. Due to the high variability in suspended sediment transport in proglacial rivers it is impossible to compute a robust annual Q-SSC-relation. Hence, two other approaches were used to calculate the suspended sediment load (SSL) and the suspended sediment yield (SSY): A) Q-SSC-relations for every single sampling cycle (e.g. GEILHAUSEN ET AL. 2013) B) Q-SSC-relations based on classification of dominant runoff-generating processes (e.g. ORWIN AND SMART 2004). The first approach uses commonly operated analysis methods that are well understood. While the hydro-climatic approach is more feasible to explain discharge generation and to

High physical work load and low job satisfaction increase the risk of sickness absence due to low back pain: Results of a prospective cohort study

NARCIS (Netherlands)

Hoogendoorn, W.E.; Bongers, P.M.; Vet, H.C.W. de; Ariëns, G.A.M.; Mechelen, W. van; Bouter, L.M.

2002-01-01

Objective: To determine whether physical and psychosocial load at work influence sickness absence due to low back pain. Methods: The research was a part of the study on musculoskeletal disorders, absenteeism, stress, and health (SMASH), a 3 year prospective cohort study on risk factors for

High physical work load and low job satisfaction increase the risk of sickness absence due to low back pain: results of a prospective cohort study

NARCIS (Netherlands)

Hoogendoorn, W.E.; Bongers, P.M.; de Vet, H.C.W.; Ariens, G.A.M.; van Mechelen, W.; Bouter, L.M.

2002-01-01

Objective: To determine whether physical and psychosocial load at work influence sickness absence due to low back pain. Methods: The research was a part of the study on musculoskeletal disorders, absenteeism, stress, and health (SMASH), a 3 year prospective cohort study on risk factors for

High physical work load and low job satisfaction increase the risk of sickness absence due to low back pain : results of a prospective cohort study

NARCIS (Netherlands)

Hoogendoorn, W E; Bongers, P M; de Vet, H C W; Ariëns, G A M; van Mechelen, W; Bouter, L M

OBJECTIVE: To determine whether physical and psychosocial load at work influence sickness absence due to low back pain. METHODS: The research was a part of the study on musculoskeletal disorders, absenteeism, stress, and health (SMASH), a 3 year prospective cohort study on risk factors for

Pushing for Part Time.

Science.gov (United States)

Geber, Beverly

1987-01-01

More employees are choosing to work part time. Although this trend started because of working women, some men are choosing part-time positions. Part-time employees forfeit salary and promotion potential, yet most feel the trade is fair and that they are more productive during their working hours. (CH)

Due diligence duties for an environmental liability

International Nuclear Information System (INIS)

Huebsch, M.

2000-04-01

Jurisdiction turned out well to create a basic ruling for due diligence duties. These due diligence duties are high standards for the law of torts (outside of contracts) within the Austrian civil law and represent a liability-extension for the holder of the source of danger. They establish an action for injunction in particular for preventing (further) damages. Therewith due diligence duties get a general sense in the range of a civil law for environmental liability. The responsible holder of a danger zone will therefore influence his way of acting to protect potential victims and the environment. The burden of proof is on the plaintiff (victims) under the Civil Code. Victims have specific sources of danger including high endangering special facilities in their argumentation with the so-called prima-facie-proof or first-appearance-proof. A turning back of the presentation of evidence to the polluter is wrong. The polluter himself has a continuing liability for dangerous activities and his clerks in the case of an extremely high danger of damage. All due diligence duties can be arranged in three areas: in information-, danger-avoidance- and danger-prevention-duties. The determination of range and essence of the duties has to be adjusted to each individual case. The range of the specific danger area is the essential link. The intensity of due diligence duties is increasing with the size of danger in the way of a movable system depending on the protected interest. Due diligence duties have to be kept within reasonable limits with two criterions: necessarity and demand. Proportionality of actions is a third criterion to avoid exaggeration of due diligence duties to obtain an effective protection for victims including the environment. (author)

Caseinomacropeptide self-association is dependent on whether the peptide is free or restricted in kappa-casein

DEFF Research Database (Denmark)

Mikkelsen, T.L.; Frokiaer, H.; Topp, C.

2005-01-01

There is a general agreement that the experimentally determined molecular weight (MW) of caseinomacropeptide (CMP) is greater than the theoretical MW. Some studies suggest that this is due to a pH-dependent aggregation of monomeric CMP. How this aggregation is influenced by pH is not understood. ...... are irreversibly associated, CMP in kappa-CN may associate reversibly in a pH-dependent manner. We suggest that interactions between para-kappa-CN parts of the kappa-CN molecules may be a requisite for the pH-dependent dissociation/association....

Kinetics of contraction-induced GLUT4 translocation in skeletal muscle fibers from living mice

DEFF Research Database (Denmark)

Lauritzen, Hans Peter M. Mortensen; Galbo, Henrik; Toyoda, Taro

2010-01-01

Exercise is an important strategy for the treatment of type 2 diabetes. This is due in part to an increase in glucose transport that occurs in the working skeletal muscles. Glucose transport is regulated by GLUT4 translocation in muscle, but the molecular machinery mediating this process is poorly...... understood. The purpose of this study was to 1) use a novel imaging system to elucidate the kinetics of contraction-induced GLUT4 translocation in skeletal muscle and 2) determine the function of AMP-activated protein kinase alpha2 (AMPKalpha2) in this process....

[Financing problems of capital goods. Part 2: procedure for investment appraisal].

Science.gov (United States)

Clausen, C C; Bauer, M; Saleh, A; Picker, O

2008-07-01

In part 1 of this series about problems of financing capital goods the multiple and partly diametric economic effects of financing instruments were presented using the leasing procedure as an example. The result indicated that due to the complexity of these effects the choice of a specific financing instrument requires an individual consideration. Therefore, part 2 of the series introduces the method of dynamic capital budgeting which allows the instruments discussed in part 1 to be compared with each other and helps to evaluate their economic benefits. More precisely this paper focuses on a comparative analysis of the most common alternatives, leasing, credit financing and investment financing by the state. In this context, after having identified the total costs of ownership of anesthesia devices, the final asset values of the three financing instruments can be compared with each other using the method of dynamic capital budgeting. In contrast to the prevailing opinion, the results show that from a purely fiscal perspective leasing anesthesia devices is the most expensive alternative. Given the fact that no financial support is available from the state, the option of credit financing turns out to be the most preferable alternative from a relatively limited pool of possibilities. However, it still remains to be answered whether credit financing can defend this position against further, innovative forms of debt financing (e.g., factoring, asset-backed securities, hedge funds, mezzanine capital, etc.).

Physical evaluations of Co-Cr-Mo parts processed using different additive manufacturing techniques

Science.gov (United States)

Ghani, Saiful Anwar Che; Mohamed, Siti Rohaida; Harun, Wan Sharuzi Wan; Noar, Nor Aida Zuraimi Md

2017-12-01

In recent years, additive manufacturing with highly design customization has gained an important technique for fabrication in aerospace and medical fields. Despite the ability of the process to produce complex components with highly controlled architecture geometrical features, maintaining the part's accuracy, ability to fabricate fully functional high density components and inferior surfaces quality are the major obstacles in producing final parts using additive manufacturing for any selected application. This study aims to evaluate the physical properties of cobalt chrome molybdenum (Co-Cr-Mo) alloys parts fabricated by different additive manufacturing techniques. The full dense Co-Cr-Mo parts were produced by Selective Laser Melting (SLM) and Direct Metal Laser Sintering (DMLS) with default process parameters. The density and relative density of samples were calculated using Archimedes' principle while the surface roughness on the top and side surface was measured using surface profiler. The roughness average (Ra) for top surface for SLM produced parts is 3.4 µm while 2.83 µm for DMLS produced parts. The Ra for side surfaces for SLM produced parts is 4.57 µm while 9.0 µm for DMLS produced parts. The higher Ra values on side surfaces compared to the top faces for both manufacturing techniques was due to the balling effect phenomenon. The yield relative density for both Co-Cr-Mo parts produced by SLM and DMLS are 99.3%. Higher energy density has influence the higher density of produced samples by SLM and DMLS processes. The findings of this work demonstrated that SLM and DMLS process with default process parameters have effectively produced full dense parts of Co-Cr-Mo with high density, good agreement of geometrical accuracy and better surface finish. Despite of both manufacturing process yield that produced components with higher density, the current finding shows that SLM technique could produce components with smoother surface quality compared to DMLS

Part C and Part D Compliance Actions

Data.gov (United States)

U.S. Department of Health & Human Services — This page includes results from CMSs Past Performance Review. The report called Spring 2014 Past Performance Review Outlier Results lists MA organizations and Part D...

Numerical modelling of welding distortion redistribution due to the change of self-constraint in a T-joint welded structure

Energy Technology Data Exchange (ETDEWEB)

Wang, Chao; Kim, Yong Rae; Kim, Jae Woong [Yeungnam University, Kyongsan (Korea, Republic of)

2016-06-15

Finite element method (FEM) is a powerful tool for analysing the potential deformation during a material removal process. After the removal of material, re-establishment of equilibrium within the remaining part of the structure causes distortion due to the relief of residual stress in the removed materials. In this study, commercial FEM software (MSC.Marc) was used to simulate material removal, and the accuracy was evaluated by comparison with results from machining experiments. The effect of cutting height on the distortion redistribution and the kerf width in a T-joint welded structure is discussed, and the distortion differences at the centre line of the bottom were compared between the calculated and experimental results. The results demonstrate that the developed model is useful and efficient for simulating the redistribution of welding distortion due to material removal.

Parts Quality Management: Direct Part Marking of Data Matrix Symbol for Mission Assurance

Science.gov (United States)

Moss, Chantrice; Chakrabarti, Suman; Scott, David W.

2013-01-01

A United States Government Accountability Office (GAO) review of twelve NASA programs found widespread parts quality problems contributing to significant cost overruns, schedule delays, and reduced system reliability. Direct part marking with Data Matrix symbols could significantly improve the quality of inventory control and parts lifecycle management. This paper examines the feasibility of using direct part marking technologies for use in future NASA programs. A structural analysis is based on marked material type, operational environment (e.g., ground, suborbital, Low Earth Orbit), durability of marks, ease of operation, reliability, and affordability. A cost-benefits analysis considers marking technology (label printing, data plates, and direct part marking) and marking types (two-dimensional machine-readable, human-readable). Previous NASA parts marking efforts and historical cost data are accounted for, including inhouse vs. outsourced marking. Some marking methods are still under development. While this paper focuses on NASA programs, results may be applicable to a variety of industrial environments.

Thermal decomposition of electronic wastes: Mobile phone case and other parts

International Nuclear Information System (INIS)

Molto, Julia; Egea, Silvia; Conesa, Juan Antonio; Font, Rafael

2011-01-01

Highlights: → Pyrolysis and combustion of different parts of mobile phones produce important quantities of CO and CO 2 . → Naphthalene is the most abundant PAH obtained in the thermal treatment of mobile phones. → Higher combustion temperature increases the chlorinated species evolved. - Abstract: Pyrolysis and combustion runs at 850 o C in a horizontal laboratory furnace were carried out on different parts of a mobile phone (printed circuit board, mobile case and a mixture of both materials). The analyses of the carbon oxides, light hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), polychlorodibenzo-p-dioxin, polychlorodibenzofurans (PCDD/Fs), and dioxin-like PCBs are shown. Regarding semivolatile compounds, phenol, styrene, and its derivatives had the highest yields. In nearly all the runs the same PAHs were identified, naphthalene being the most common component obtained. Combustion of the printed circuit board produced the highest emission factor of PCDD/Fs, possibly due to the high copper content.

Intracellular calcium leak due to FKBP12.6 deficiency in mice facilitates the inducibility of atrial fibrillation

NARCIS (Netherlands)

Sood, Subeena; Chelu, Mihail G.; van Oort, Ralph J.; Skapura, Darlene; Santonastasi, Marco; Dobrev, Dobromir; Wehrens, Xander H. T.

2008-01-01

BACKGROUND: Although defective Ca(2+) homeostasis may contribute to arrhythmogenesis in atrial fibrillation (AF), the underlying molecular mechanisms remain poorly understood. Studies in patients with AF revealed that impaired diastolic closure of sarcoplasmic reticulum (SR) Ca(2+)-release channels

Deeply subducted continental fragments - Part 1: Fracturing, dissolution-precipitation, and diffusion processes recorded by garnet textures of the central Sesia Zone (western Italian Alps)

Science.gov (United States)

Giuntoli, Francesco; Lanari, Pierre; Engi, Martin

2018-02-01

Contiguous continental high-pressure terranes in orogens offer insight into deep recycling and transformation processes that occur in subduction zones. These remain poorly understood, and currently debated ideas need testing. The approach we chose is to investigate, in detail, the record in suitable rock samples that preserve textures and robust mineral assemblages that withstood overprinting during exhumation. We document complex garnet zoning in eclogitic mica schists from the Sesia Zone (western Italian Alps). These retain evidence of two orogenic cycles and provide detailed insight into resorption, growth, and diffusion processes induced by fluid pulses in high-pressure conditions. We analysed local textures and garnet compositional patterns, which turned out remarkably complex. By combining these with thermodynamic modelling, we could unravel and quantify repeated fluid-rock interaction processes. Garnet shows low-Ca porphyroclastic cores that were stable under (Permian) granulite facies conditions. The series of rims that surround these cores provide insight into the subsequent evolution: the first garnet rim that surrounds the pre-Alpine granulite facies core in one sample indicates that pre-Alpine amphibolite facies metamorphism followed the granulite facies event. In all samples documented, cores show lobate edges and preserve inner fractures, which are sealed by high-Ca garnet that reflects high-pressure Alpine conditions. These observations suggest that during early stages of subduction, before hydration of the granulites, brittle failure of garnet occurred, indicating high strain rates that may be due to seismic failure. Several Alpine rims show conspicuous textures indicative of interaction with hydrous fluid: (a) resorption-dominated textures produced lobate edges, at the expense of the outer part of the granulite core; (b) peninsulas and atoll garnet are the result of replacement reactions; and (c) spatially limited resorption and enhanced transport

Numerical study on injection parameters optimization of thin wall and biodegradable polymers parts

Science.gov (United States)

Santos, C.; Mendes, A.; Carreira, P.; Mateus, A.; Malça, C.

2017-07-01

Nowadays, the molds industry searches new markets, with diversified and added value products. The concept associated to the production of thin walled and biodegradable parts mostly manufactured by injection process has assumed a relevant importance due to environmental and economic factors. The growth of a global consciousness about the harmful effects of the conventional polymers in our life quality associated with the legislation imposed, become key factors for the choice of a particular product by the consumer. The target of this work is to provide an integrated solution for the injection of parts with thin walls and manufactured using biodegradable materials. This integrated solution includes the design and manufacture processes of the mold as well as to find the optimum values for the injection parameters in order to become the process effective and competitive. For this, the Moldflow software was used. It was demonstrated that this computational tool provides an effective responsiveness and it can constitute an important tool in supporting the injection molding of thin-walled and biodegradable parts.

9 CFR 124.33 - Standard of due diligence.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Standard of due diligence. 124.33 Section 124.33 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... Diligence Petitions § 124.33 Standard of due diligence. (a) In determining the due diligence of an applicant...

Differences in crystalline cellulose modification due to degradation by brown and white rot fungi.

Science.gov (United States)

Hastrup, Anne Christine Steenkjær; Howell, Caitlin; Larsen, Flemming Hofmann; Sathitsuksanoh, Noppadon; Goodell, Barry; Jellison, Jody

2012-10-01

Wood-decaying basidiomycetes are some of the most effective bioconverters of lignocellulose in nature, however the way they alter wood crystalline cellulose on a molecular level is still not well understood. To address this, we examined and compared changes in wood undergoing decay by two species of brown rot fungi, Gloeophyllum trabeum and Meruliporia incrassata, and two species of white rot fungi, Irpex lacteus and Pycnoporus sanguineus, using X-ray diffraction (XRD) and (13)C solid-state nuclear magnetic resonance (NMR) spectroscopy. The overall percent crystallinity in wood undergoing decay by M. incrassata, G. trabeum, and I. lacteus appeared to decrease according to the stage of decay, while in wood decayed by P. sanguineus the crystallinity was found to increase during some stages of degradation. This result is suggested to be potentially due to the different decay strategies employed by these fungi. The average spacing between the 200 cellulose crystal planes was significantly decreased in wood degraded by brown rot, whereas changes observed in wood degraded by the two white rot fungi examined varied according to the selectivity for lignin. The conclusions were supported by a quantitative analysis of the structural components in the wood before and during decay confirming the distinct differences observed for brown and white rot fungi. The results from this study were consistent with differences in degradation methods previously reported among fungal species, specifically more non-enzymatic degradation in brown rot versus more enzymatic degradation in white rot. Copyright © 2012 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

Hysterosalpingographic Appearances of Female Genital Tract Tuberculosis: Part I. Fallopian Tube

Directory of Open Access Journals (Sweden)

Firoozeh Ahmadi

2014-01-01

Full Text Available Female genital tuberculosis (TB remains as a major cause of tubal obstruction leading to infertility, especially in developing countries. The global prevalence of genital tuberculosis has increased during the past two decades due to increasing acquired immunodeficiency syndrome (AIDS. Genital TB is commonly asymptomatic, and it is diagnosed during infertility investigations. Despite of recent advances in imaging tools, such as computerized tomography (CT scan, magnetic resonance imaging (MRI and ultrasongraphy, hysterosalpingography is still the standard screening test for evaluation of tubal infertility and a valuable tool for diagnosis of female genital tuberculosis. Tuberculosis gives rise to various appearances on hysterosalpingography (HSG from non-specific changes to specific findings. The present pictorial review illustrates and describes specific and non-specific radiographic features of female genital tuberculosis in two parts. Part I presents specific findings of tuberculosis related to tubes such as "beaded tube", "golf club tube", "pipestem tube", "cobble stone tube" and "leopard skin tube". Part II describes adverse effects of tuberculosis on structure of endometrium and radiological specific findings such as "dwarfed" uterus with lymphatic intravasation and occluded tubes, "T-shaped" tuberculosis uterus, "pseudounicornuate" uterus and "Collar-stud abscess", which have not been encountered in the majority of non-tuberculosis cases.

Systemic contact dermatitis due to nickel

Directory of Open Access Journals (Sweden)

Taruli Olivia

2015-08-01

Full Text Available Introduction: Systemic contact dermatitis (SCD is a systemic reactivation of a previous allergic contact dermatitis. The initial exposure may usually be topical, followed by oral, intravenous or inhalation exposure leading to a systemic hypersensitivity reaction. A case of a 27 year-old male with SCD due to nickel is reported Case Report: A 27 year-old male presented with recurrent pruritic eruption consist of deep seated vesicles on both palmar and left plantar since 6 months before admission. This complaint began after patient consumed excessive amounts of chocolate, canned food, and beans. The patient worked as a technician in a food factory. History of allergy due to nickel was acknowledged since childhood. The clinical presentation was diffuse deep seated vesicles, and multiple erythematous macules to plaques, with collarette scale. Patch test using the European standard showed a +3 result to nickel. The patient was diagnosed as systemic contact dermatitis due to nickel. The treatments were topical corticosteroid and patient education of avoidance of both contact and systemic exposure to nickel. The patient showed clinical improvement after 2 weeks. Discussion: SCD was diagnosed due to the history of massive consumption of food containing nickel in a patient who had initial sensitization to nickel, with clinical features and the patch test result. Advice to be aware of nickel and its avoidance is important in SCD management.

Turbulent momentum transport due to neoclassical flows

International Nuclear Information System (INIS)

Lee, Jungpyo; Barnes, Michael; Parra, Felix I; Belli, Emily; Candy, Jeff

2015-01-01

Intrinsic toroidal rotation in a tokamak can be driven by turbulent momentum transport due to neoclassical flow effects breaking a symmetry of turbulence. In this paper we categorize the contributions due to neoclassical effects to the turbulent momentum transport, and evaluate each contribution using gyrokinetic simulations. We find that the relative importance of each contribution changes with collisionality. For low collisionality, the dominant contributions come from neoclassical particle and parallel flows. For moderate collisionality, there are non-negligible contributions due to neoclassical poloidal electric field and poloidal gradients of density and temperature, which are not important for low collisionality. (paper)

Colour due to Cr³⁺ ions in oxides: a study of the model system MgO:Cr³⁺

DEFF Research Database (Denmark)

Aramburu, J. A.; Garcia-Fernandez, P.; García Lastra, Juan Maria

2013-01-01

Seeking to understand why the cubic centre in MgO:Cr3+ has the same 10Dq value as emerald, ab initio cluster and periodic supercell calculations have been performed. It is found that the equilibrium Cr3+-O2- distance, R, in MgO:Cr3+ is equal to 2.03 Å and thus 0.06 Å higher than that measured...... for the emerald. Calculations carried out on the isolated CrO69- complex at R = 2.03 Å give 10Dq = 14 510 cm-1, which is 10% smaller than the experimental figure for MgO:Cr3+. Nevertheless, when the internal electric field, ER(r), due to the rest of the lattice ions is also taken into account, the calculated 10Dq...... = 16 210 cm-1 coincides with the experimental value. Accordingly, the colour shift for different oxides doped with Cr3+ can be well understood on the basis of this extrinsic contribution to 10Dq usually ignored in a ligand field description. The calculated electrostatic potential, VR(r), related to ER(r...

Tensile Properties Characterization of AlSi10Mg Parts Produced by Direct Metal Laser Sintering via Nested Effects Modeling

Directory of Open Access Journals (Sweden)

Biagio Palumbo

2017-02-01

Full Text Available A statistical approach for the characterization of Additive Manufacturing (AM processes is presented in this paper. Design of Experiments (DOE and ANalysis of VAriance (ANOVA, both based on Nested Effects Modeling (NEM technique, are adopted to assess the effect of different laser exposure strategies on physical and mechanical properties of AlSi10Mg parts produced by Direct Metal Laser Sintering (DMLS. Due to the wide industrial interest in AM technologies in many different fields, it is extremely important to ensure high parts performances and productivity. For this aim, the present paper focuses on the evaluation of tensile properties of specimens built with different laser exposure strategies. Two optimal laser parameters settings, in terms of both process quality (part performances and productivity (part build rate, are identified.

Anisotropy of the upper mantle beneath the equatorial part of the Mid-Atlantic Ridge

Science.gov (United States)

Kendall, J. M.; Rychert, C.; Harmon, N.; Tharimena, S.; Agius, M. R.

2017-12-01

It has been long-known that the mantle beneath ocean spreading centres is anisotropic, holding the signature of the formation of new oceanic lithosphere and its coupling with the underlying convecting asthenosphere. Numerical studies have suggested that there should be significant differences between the anisotropy at slow versus fast spreading centres, but there is little observational evidence to calibrate these simulations, especially at slow spreading centres. Near the ridge axis, the anisotropic effects of melt versus the lattice preferred orientation of minerals is not well understood. Finally, the mantle flow near ridge-transform interactions is also poorly understood. Here we present observations of SKS splitting in a region of the Mid-Atlantic Ridge near the equator and offset by the Romanche and Chain Fracture Zones. An array of 37 ocean-bottom seismometers were deployed for a year in depths of up to nearly 6000m, with the aim of studying the nature of the lithosphere-asthenosphere boundary as it forms (the PiLAB - Passive Imaging of the lithosphere-asthenosphere boundary - experiment). Stations were deployed on crust that varies from newly formed to 80 My old. We analyse 40 teleseismic events of magnitude greater than 5.8 and with epicentral distances between 88 and 130 degrees. The ocean-bottom is a noisy environment and a range of filters are used to isolate the SKS, SKKS, and related signals. Furthermore, stacking splitting error envelopes is used to improve confidence in the splitting parameters. Many of the splitting measurements show an orientation parallel to the direction of plate spreading, as expected, but variability in the orientation of the anisotropy increases towards the ridge axis. The magnitude of the anisotropy is also quite variable and suggests larger delay times near the ridge axis. Off-axis anisotropy is interpreted in terms of deformation of peridotite due to mantle flow. Near the ridge axis, the effect of ridge-parallel melt

Multi-year study of the carbonate system in the Chukchi Sea with emphasizes on its western part

Science.gov (United States)

Semiletov, I. P.; Pipko, I.; Pugach, S.

2015-12-01

Variability of the Arctic climate has affected many aspects of the Arctic environment, especially in the Pacific sector of the Arctic. The primary implication is that today's Arctic cryosphere (glaciers, frozen ground, and sea ice) and biosphere (terrestrial, lacustrine, and marine) are not at steady state; they have changed and will continue to change in response to evolving Arctic climate. Over the decade 2004-2013 environmental changes in the Pacific sector of the Arctic have been dramatic enough to suggest that a 'new normal' climate is emerging (Wood et al., 2015). Like everywhere in the Arctic, understanding of environmental change in the Chukchi Sea is hindered by sparse data. Dynamics of the carbonate system (CS) in the eastern Chukchi Sea (US EEZ) has been studied more extensively for a longer period and is better understood than in its western (Russian EEZ) part. Here we focus on the carbonate system data collected in the Russian part of the Chukchi Sea over > 10 years (2000-2011). Our data exhibit a strong mesoscale and interannual dynamics of carbonate system parameters in the surface seawater. The aragonite saturation state (WAr) was highly variable but also has generally been decreasing in the upper waters from 2000 to 2011. It was shown that despite strong sea ice loss, waters heating and storm increasing, the surface waters in this area have been consistently undersaturated by CO2 with respect to the atmosphere. Notable localized exceptions, where CO2 outgassing occurs, include the well-mixed waters near Bering Strait. Combining our long-term carbonate system data set (1996-2011) with the available literature data we felt in conclusion that the entire Chukchi Sea during ice-free season absorbs ~12-15× 1012 g C and a significant part of this carbon was transferred to the deep layers and insulated from contact with the atmosphere for a long time. Note that the CO2 invasion is a similar value with the CO2 outgassing from the shallow eastern Laptev Sea

Fuel cycle math - part one

International Nuclear Information System (INIS)

Anon.

1992-01-01

This article is Part One of a two-part article that reviews some of the numbers associated with the nuclear fuel cycle. The contents of Part One include: composition of the element uranium, considering atomic mass and weight-percent of the isotopes; uranium in the ground, including ore grades; mining, with dilution factors and recovery rates; ore sorting, including concentration factors; and uranium recovery. No financial information is presented in either Part One or Part Two

High physical work load and low job satisfaction increase the risk of sickness absence due to low back pain: results of a prospective cohort study.

Science.gov (United States)

Hoogendoorn, W E; Bongers, P M; de Vet, H C W; Ariëns, G A M; van Mechelen, W; Bouter, L M

2002-05-01

To determine whether physical and psychosocial load at work influence sickness absence due to low back pain. The research was a part of the study on musculoskeletal disorders, absenteeism, stress, and health (SMASH), a 3 year prospective cohort study on risk factors for musculoskeletal disorders. Workers from 21 companies located throughout The Netherlands participated in the part of this study on sickness absence due to low back pain. The study population consisted of 732 workers with no sickness absences of 3 days or longer due to low back pain in the 3 months before the baseline survey and complete data on the reasons for absences during the follow up period. The mean (range) period of follow up in this group was 37 (7-44) months. Physical load at work was assessed by analyses of video recordings. Baseline information on psychosocial work characteristics was obtained by a questionnaire. Data on sickness absence were collected from company records. The main outcome measure was the rate of sickness absences of 3 days or longer due to low back pain during the follow up period. After adjustment of the work related physical and psychosocial factors for each other and for other potential determinants, significant rate ratios ranging from 2.0 to 3.2 were found for trunk flexion, trunk rotation, lifting, and low job satisfaction. A dose-response relation was found for trunk flexion, but not for trunk rotation or lifting. Non-significant rate ratios of about 1.4 were found for low supervisor support and low coworker support. Quantitative job demands, conflicting demands, decision authority, and skill discretion showed no relation with sickness absence due to low back pain. Flexion and rotation of the trunk, lifting, and low job satisfaction are risk factors for sickness absence due to low back pain. Some indications of a relation between low social support, either from supervisors or coworkers, and sickness absence due to low back pain are also present.

Electron paramagnetic resonance line shifts and line shape changes due to heisenberg spin exchange and dipole-dipole interactions of nitroxide free radicals in liquids 8. Further experimental and theoretical efforts to separate the effects of the two interactions.

Science.gov (United States)

Peric, Mirna; Bales, Barney L; Peric, Miroslav

2012-03-22

The work in part 6 of this series (J. Phys. Chem. A 2009, 113, 4930), addressing the task of separating the effects of Heisenberg spin exchange (HSE) and dipole-dipole interactions (DD) on electron paramagnetic resonance (EPR) spectra of nitroxide spin probes in solution, is extended experimentally and theoretically. Comprehensive measurements of perdeuterated 2,2,6,6-tetramethyl-4-oxopiperidine-1-oxyl (pDT) in squalane, a viscous alkane, paying special attention to lower temperatures and lower concentrations, were carried out in an attempt to focus on DD, the lesser understood of the two interactions. Theoretically, the analysis has been extended to include the recent comprehensive treatment by Salikhov (Appl. Magn. Reson. 2010, 38, 237). In dilute solutions, both interactions (1) introduce a dispersion component, (2) broaden the lines, and (3) shift the lines. DD introduces a dispersion component proportional to the concentration and of opposite sign to that of HSE. Equations relating the EPR spectral parameters to the rate constants due to HSE and DD have been derived. By employing nonlinear least-squares fitting of theoretical spectra to a simple analytical function and the proposed equations, the contributions of the two interactions to items 1-3 may be quantified and compared with the same parameters obtained by fitting experimental spectra. This comparison supports the theory in its broad predictions; however, at low temperatures, the DD contribution to the experimental dispersion amplitude does not increase linearly with concentration. We are unable to deduce whether this discrepancy is due to inadequate analysis of the experimental data or an incomplete theory. A new key aspect of the more comprehensive theory is that there is enough information in the experimental spectra to find items 1-3 due to both interactions; however, in principle, appeal must be made to a model of molecular diffusion to separate the two. The permanent diffusion model is used to

Feeding Behavior-Related Toxicity due to Nandina domestica in Cedar Waxwings (Bombycilla cedrorum

Directory of Open Access Journals (Sweden)

Moges Woldemeskel

2010-01-01

Full Text Available Dozens of Cedar Waxwings were found dead in Thomas County, Georgia, USA, in April 2009. Five of these were examined grossly and microscopically. Grossly, all the examined birds had pulmonary, mediastinal, and tracheal hemorrhages. Microscopically, several tissues and organs were diffusely congested and hemorrhagic. Congestion and hemorrhage were marked in the lungs. Intact and partly digested berries of Nandina domestica Thunb. were the only ingesta found in the gastrointestinal tract of these birds. Due to their voracious feeding behavior, the birds had eaten toxic doses of N. domestica berries. N. domestica contains cyanide and is one of the few berries readily available at this time of the year in the region. The gross and microscopic findings are consistent with lesions associated with cyanide toxicity. This paper for the first time documents toxicity associated with N. domestica in Cedar Waxwings.

Vehicle parts detection based on Faster - RCNN with location constraints of vehicle parts feature point

Science.gov (United States)

Yang, Liqin; Sang, Nong; Gao, Changxin

2018-03-01

Vehicle parts detection plays an important role in public transportation safety and mobility. The detection of vehicle parts is to detect the position of each vehicle part. We propose a new approach by combining Faster RCNN and three level cascaded convolutional neural network (DCNN). The output of Faster RCNN is a series of bounding boxes with coordinate information, from which we can locate vehicle parts. DCNN can precisely predict feature point position, which is the center of vehicle part. We design an output strategy by combining these two results. There are two advantages for this. The quality of the bounding boxes are greatly improved, which means vehicle parts feature point position can be located more precise. Meanwhile we preserve the position relationship between vehicle parts and effectively improve the validity and reliability of the result. By using our algorithm, the performance of the vehicle parts detection improve obviously compared with Faster RCNN.

Changes in competitive strategies due to deregulation and privatization in the petroleum industry: a comparative study

International Nuclear Information System (INIS)

Teixeira Carneiro, J.M.; Moutinho Dos Santos, E.

1999-01-01

This article is part of a series of four dedicated to the study of the global oil competition game through the analytical framework proposed by Michael Porter, from the University of Harvard. By means of a questionnaire answered by top executives in ten oil companies, the authors investigate the changes in the competitive strategy of these companies in the downstream side of the oil business due to deregulation and privatization. The paper starts by establishing the relationship between Porter's generic competitive strategies and specific competitive methods. Then, it describes how companies have changes their competitive methods after privatization and major deregulation. Changes in the industry structure are also analyzed. (authors)

Procedural Due Process Rights in Student Discipline.

Science.gov (United States)

Pressman, Robert; Weinstein, Susan

To assist administrators in understanding procedural due process rights in student discipline, this manual draws together hundreds of citations and case summaries of federal and state court decisions and provides detailed commentary as well. Chapter 1 outlines the general principles of procedural due process rights in student discipline, such as…

Modeling gamma radiation dose in dwellings due to building materials.

Science.gov (United States)

de Jong, Peter; van Dijk, Willem

2008-01-01

A model is presented that calculates the absorbed dose rate in air of gamma radiation emitted by building materials in a rectangular body construction. The basis for these calculations is formed by a fixed set of specific absorbed dose rates (the dose rate per Bq kg(-1) 238U, 232Th, and 40K), as determined for a standard geometry with the dimensions 4 x 5 x 2.8 m3. Using the computer codes Marmer and MicroShield, correction factors are assessed that quantify the influence of several room and material related parameters on the specific absorbed dose rates. The investigated parameters are the position in the construction; the thickness, density, and dimensions of the construction parts; the contribution from the outer leave; the presence of doors and windows; the attenuation by internal partition walls; the contribution from building materials present in adjacent rooms; and the effect of non-equilibrium due to 222Rn exhalation. To verify the precision, the proposed method is applied to three Dutch reference dwellings, i.e., a row house, a coupled house, and a gallery apartment. The averaged difference with MCNP calculations is found to be 4%.

A-Part Gel, an adhesion prophylaxis for abdominal surgery: a randomized controlled phase I-II safety study [NCT00646412].

Science.gov (United States)

Lang, Reinhold; Baumann, Petra; Schmoor, Claudia; Odermatt, Erich K; Wente, Moritz N; Jauch, Karl-Walter

2015-01-01

Intra-abdominal surgical intervention can cause the development of intra-peritoneal adhesions. To reduce this problem, different agents have been tested to minimize abdominal adhesions; however, the optimal adhesion prophylaxis has not been found so far. Therefore, the A-Part(®) Gel was developed as a barrier to diminish postsurgical adhesions; the aim of this randomized controlled study was a first evaluation of its safety and efficacy. In this prospective, controlled, randomized, patient-blinded, monocenter phase I-II study, 62 patients received either the hydrogel A-Part-Gel(®) as an anti-adhesive barrier or were untreated after primary elective median laparotomy. Primary endpoint was the occurrence of peritonitis and/or wound healing impairment 28 ± 10 days postoperatively. As secondary endpoints anastomotic leakage until 28 days after surgery, adverse events and adhesions were assessed until 3 months postoperatively. A lower rate of wound healing impairment and/or peritonitis was observed in the A-Part Gel(®) group compared to the control group: (6.5 vs. 13.8 %). The difference between the two groups was -7.3%, 90 % confidence interval [-20.1, 5.4 %]. Both treatment groups showed similar frequency of anastomotic leakage but incidence of adverse events and serious adverse events were slightly lower in the A-Part Gel(®) group compared to the control. Adhesion rates were comparable in both groups. A-Part Gel(®) is safe as an adhesion prophylaxis after abdominal wall surgery but no reduction of postoperative peritoneal adhesion could be found in comparison to the control group. This may at least in part be due to the small sample size as well as to the incomplete coverage of the incision due to the used application. NCT00646412.

Brand-name drug, generic drug, orphan drug. Pharmacological therapy with biosimilar drugs – provision of due diligence in the treatment process

Science.gov (United States)

Zajdel, Justyna

2013-01-01

Due diligence in the process of provision of healthcare services refers, among other elements, to the application of pharmacological therapy at a time which offers the greatest chance for a successful outcome of treatment, i.e. for achieving the optimum expected effect understood as an improvement in the patient's health, reduction of health risks or elimination of the disease. However, due diligence may also refer to actions aimed at ensuring that neither the patient nor the healthcare payer is required to incur unreasonable costs in the process of treatment. The validity of that statement stems not only from normative acts but also from ethical standards laid down in the Medical Code of Ethics (Article 57 section 2). It often happens that the provision of optimal treatment calls for deviations from the formal provisions included in Summary Product Characteristics (SPCs), and the application of drugs that are bioequivalent to reference drugs, which translates into a significant reduction of costs. The present study addresses the problem of acceptability of a specific form of drug substitution consisting in the replacement of a reference drug with a generic drug. Also explored are legal aspects associated with the possibility of therapy based on “off-label use”. The study reviews normative acts existing in the Polish and EU legislation. It also provides a clear definition of orphan drug, which has made it possible to make a distinction and investigate mutual relations between the concepts of brand-name (reference) drug, orphan drug and generic drug. PMID:24592133

Secondary Moments due to Prestressing with Different Bond at the Ultimate Limit State

Directory of Open Access Journals (Sweden)

Halvoník Jaroslav

2018-03-01

Full Text Available Secondary effects of prestressing develop in statically indeterminate structures (e.g., continuous beams due to the restraint of deformations imposed by hyperstatic restraints. These effects may significantly influence internal forces and stresses in prestressed structures. Secondary effects are influenced by the redundancy of a structural system, which raises the question of whether they will remain constant after a change in the structural system, e.g., due to the development of plastic hinge(s in a critical cross-section(s or after the development of a kinematic mechanism, or if they will disappear when the structure changes into a sequence of simply supported beams. The paper deals with an investigation of the behavior of continuous post-tensioned beams subjected to an ultimate load with significant secondary effects from prestressing. A total of 6 two-span beams prestressed by tendons with different bonds were tested in a laboratory with a load that changed their structural system into a kinematic mechanism. The internal forces and secondary effects of the prestressing were controlled through measurements of the reactions in all the supports. The results revealed that the secondary effects remained as a permanent part of the action on the experimental beams, even after the development of the kinematic mechanism. The results obtained confirmed that secondary effects should be included in all combinations of actions for verifications of ultimate limit states (ULS.

Secondary Moments due to Prestressing with Different Bond at the Ultimate Limit State

Science.gov (United States)

Halvoník, Jaroslav; Pažma, Peter; Vida, Radoslav

2018-03-01

Secondary effects of prestressing develop in statically indeterminate structures (e.g., continuous beams) due to the restraint of deformations imposed by hyperstatic restraints. These effects may significantly influence internal forces and stresses in prestressed structures. Secondary effects are influenced by the redundancy of a structural system, which raises the question of whether they will remain constant after a change in the structural system, e.g., due to the development of plastic hinge(s) in a critical cross-section(s) or after the development of a kinematic mechanism, or if they will disappear when the structure changes into a sequence of simply supported beams. The paper deals with an investigation of the behavior of continuous post-tensioned beams subjected to an ultimate load with significant secondary effects from prestressing. A total of 6 two-span beams prestressed by tendons with different bonds were tested in a laboratory with a load that changed their structural system into a kinematic mechanism. The internal forces and secondary effects of the prestressing were controlled through measurements of the reactions in all the supports. The results revealed that the secondary effects remained as a permanent part of the action on the experimental beams, even after the development of the kinematic mechanism. The results obtained confirmed that secondary effects should be included in all combinations of actions for verifications of ultimate limit states (ULS).

Are part timers real GPs? Attitudes of general practitioners toward those who work part time.

Science.gov (United States)

Mazza, D; Northfield, S

2000-09-01

Current attitudes within the medical profession suggest that one cannot be a 'real' doctor unless one works full time. The aim of this study was to determine the views and attitudes of a sample of GPs toward part time practice. As part of a larger study, GPs in two divisions in metropolitan Melbourne were sent a questionnaire based survey. GPs were asked to rate statements about part time practice using a Likert scale. The response rate was 55% (n = 246). The majority of GPs disagreed with the statement 'part time GPs are not real GPs' but feelings were mixed about whether part timers covered the same range of clinical content as full timers. One fifth of respondents questioned the competence of part time GPs. Male GPs, those over 55 years and full timers were more likely to hold negative views toward part time general practice. Our results show a 'generational' pattern toward part time practice. With the increasing numbers of women entering general practice, these attitudes will need to change to accommodate the fact that more GPs will be choosing to work part time in the future.

Soybean Protein Fibres Part 1: Structure, Production and Environmental Effects of Soybean Protein Fibres

Directory of Open Access Journals (Sweden)

Fatma Filiz YILDIRIM

2014-12-01

Full Text Available Soybean fiber (SPF is a protein based botanic fibre. These fibers exhibit very good physical properties such as brightness, softness and drape. Moreover, SPF has a variety of health functionalities and anti-bacterial properties. Fibers were first produced in the 20th mid-century. However due to the significant challenges encountered during the production of SPF, interest for these fibers was decreased. At the end of the 20 th century, SPF re-captured attention due to an increased awakening on ecological, renewable and sustainable fiber concept. Soybean is cheap and abundant. Tenacity of SPF was improved by including polyvinyl alcohol (PVA. Therefore, the production and the usage of SPF are increasing rapidly because of these key advantages. Soybean fibers usually is used in blends with other fibers. In Turkey, a variety of different products are produced from this special fiber. This review, about SPF, is divided into two sections. In the first part; structure and production stages of SPF and its enviromental effects have been described. In the second part of this review, properties and application areas of SPF have been described. The purpose of this review is to fill a gap in the Turkish literature about this bio-degradable, renewable and sustainable SPF. 

Damaged Neocortical Perineuronal Nets Due to Experimental Focal Cerebral Ischemia in Mice, Rats and Sheep

Directory of Open Access Journals (Sweden)

Wolfgang Härtig

2017-08-01

Full Text Available As part of the extracellular matrix (ECM, perineuronal nets (PNs are polyanionic, chondroitin sulfate proteoglycan (CSPG-rich coatings of certain neurons, known to be affected in various neural diseases. Although these structures are considered as important parts of the neurovascular unit (NVU, their role during evolution of acute ischemic stroke and subsequent tissue damage is poorly understood and only a few preclinical studies analyzed PNs after acute ischemic stroke. By employing three models of experimental focal cerebral ischemia, this study was focused on histopathological alterations of PNs and concomitant vascular, glial and neuronal changes according to the NVU concept. We analyzed brain tissues obtained 1 day after ischemia onset from: (a mice after filament-based permanent middle cerebral artery occlusion (pMCAO; (b rats subjected to thromboembolic MACO; and (c sheep at 14 days after electrosurgically induced focal cerebral ischemia. Multiple fluorescence labeling was applied to explore simultaneous alterations of NVU and ECM. Serial mouse sections labeled with the net marker Wisteria floribunda agglutinin (WFA displayed largely decomposed and nearly erased PNs in infarcted neocortical areas that were demarcated by up-regulated immunoreactivity for vascular collagen IV (Coll IV. Subsequent semi-quantitative analyses in mice confirmed significantly decreased WFA-staining along the ischemic border zone and a relative decrease in the directly ischemia-affected neocortex. Triple fluorescence labeling throughout the three animal models revealed up-regulated Coll IV and decomposed PNs accompanied by activated astroglia and altered immunoreactivity for parvalbumin, a calcium-binding protein in fast-firing GABAergic neurons which are predominantly surrounded by neocortical PNs. Furthermore, ischemic neocortical areas in rodents simultaneously displayed less intense staining of WFA, aggrecan, the net components neurocan, versican and the

Intrinsic speckle noise in in-line particle holography due to polydisperse and continuous particle sizes

Science.gov (United States)

Edwards, Philip J.; Hobson, Peter R.; Rodgers, G. J.

2000-08-01

In-line particle holography is subject to image deterioration due to intrinsic speckle noise. The resulting reduction in the signal to noise ratio (SNR) of the replayed image can become critical for applications such as holographic particle velocimetry (HPV) and 3D visualisation of marine plankton. Work has been done to extend the mono-disperse model relevant to HPV to include poly-disperse particle fields appropriate for the visualisation of marine plankton. Continuous and discrete particle fields are both considered. It is found that random walk statistics still apply for the poly-disperse case. The speckle field is simply the summation of the individual speckle patters due to each scatter size. Therefor the characteristic speckle parameter (which encompasses particle diameter, concentration and sample depth) is alos just the summation of the individual speckle parameters. This reduces the SNR calculation to the same form as for the mono-disperse case. For the continuous situation three distributions, power, exponential and Gaussian are discussed with the resulting SNR calcuated. The work presented here was performed as part of the Holomar project to produce a working underwater holographic camera for recording plankton.

Study on evolution of disposal environment due to alteration of cement. Commission work report

International Nuclear Information System (INIS)

Iriya, K.; Kubo, H.; Kato, T.; Fujita, H.

2001-02-01

The study shows effects on performance of the engineered and geological barriers due to alteration of cement including low alkalinity cement. Alteration test of bentonite and crystalline rock was carried out by low alkalinity cement pore water. Leaching of super plasticizer was investigated modeled for the latest period of alteration of cement. Planning a experiment for corrosion of re-bar in low alkalinity cement was carried out. Application of the cement for shotcrete was investigated. The results described below are obtained. 1. Almost of montmorillonite was solved in Na-K-Ca mixed solution. No alteration was observed in low alkalinity cement. The similar results were obtained for crystalline rock. 2. It is noted that main part of super plasticizer wasn't leachate even in the latest period of leaching of cement. Increment of leaching of super plasticizer wasn't observed corresponding to leaching of cement hydrates. 3. Accelerating test for corrosion of re-bar in low alkalinity cement was proposed. 4. It was demonstrated that low alkalinity cement was applicable for shotcrete. 5. pH of pore water of cement with highly pozzolanic materials isn't significantly decreased in high temperature. 6. Predictable alteration of barriers due to alteration of cement were pointed out including interaction of bentonite and rock. (author)

Assessment of ecologically relevant hydrological change in China due to water use and reservoirs

Directory of Open Access Journals (Sweden)

J. Zhang

2008-06-01

Full Text Available As China's economy booms, increasing water use has significantly affected hydro-geomorphic processes and thus the ecology of surface waters. A large variety of hydrological changes arising from human activities such as reservoir construction and management, water abstraction, water diversion and agricultural land expansion have been sustained throughout China. Using the global scale hydrological and water use model WaterGAP, natural and anthropogenically altered flow conditions are calculated, taking into account flow alterations due to human water consumption and 580 large reservoirs. The impacts resulting from water consumption and reservoirs have been analyzed separately. A modified "Indicators of Hydrologic Alteration" approach is used to describe the human pressures on aquatic ecosystems due to anthropogenic alterations in river flow regimes. The changes in long-term average river discharge, average monthly mean discharge and coefficients of variation of monthly river discharges under natural and impacted conditions are compared and analyzed. The indicators show very significant alterations of natural river flow regimes in a large part of northern China and only minor alterations in most of southern China. The detected large alterations in long-term average river discharge, the seasonality of flows and the inter-annual variability in the northern half of China are very likely to have caused significant ecological impacts.

Part-based Pedestrian Detection and Feature-based Tracking for Driver Assistance

DEFF Research Database (Denmark)

Prioletti, Antonio; Møgelmose, Andreas; Grislieri, Paolo

2013-01-01

Detecting pedestrians is still a challenging task for automotive vision systems due to the extreme variability of targets, lighting conditions, occlusion, and high-speed vehicle motion. Much research has been focused on this problem in the last ten years and detectors based on classifiers have...... on a prototype vehicle and offers high performance in terms of several metrics, such as detection rate, false positives per hour, and frame rate. The novelty of this system relies on the combination of a HOG part-based approach, tracking based on a specific optimized feature, and porting on a real prototype....

Irreversible climate change due to carbon dioxide emissions

Science.gov (United States)

Solomon, Susan; Plattner, Gian-Kasper; Knutti, Reto; Friedlingstein, Pierre

2009-01-01

The severity of damaging human-induced climate change depends not only on the magnitude of the change but also on the potential for irreversibility. This paper shows that the climate change that takes place due to increases in carbon dioxide concentration is largely irreversible for 1,000 years after emissions stop. Following cessation of emissions, removal of atmospheric carbon dioxide decreases radiative forcing, but is largely compensated by slower loss of heat to the ocean, so that atmospheric temperatures do not drop significantly for at least 1,000 years. Among illustrative irreversible impacts that should be expected if atmospheric carbon dioxide concentrations increase from current levels near 385 parts per million by volume (ppmv) to a peak of 450–600 ppmv over the coming century are irreversible dry-season rainfall reductions in several regions comparable to those of the “dust bowl” era and inexorable sea level rise. Thermal expansion of the warming ocean provides a conservative lower limit to irreversible global average sea level rise of at least 0.4–1.0 m if 21st century CO2 concentrations exceed 600 ppmv and 0.6–1.9 m for peak CO2 concentrations exceeding ≈1,000 ppmv. Additional contributions from glaciers and ice sheet contributions to future sea level rise are uncertain but may equal or exceed several meters over the next millennium or longer. PMID:19179281

Rare case of subcutaneous mycosis with intrathoracic extension due to Chaetomium strumarium.

Science.gov (United States)

Verma, R; Vasudevan, B; Badwal, S; Sriram, R; Neema, S; Kharayat, V

2015-08-01

A 47-year-old man presented with a 10-year history of multiple lumps over his left upper arm and shoulder and the adjoining left side of his chest and upper back. His medical history included diabetes mellitus type 2. The patient was a farmer and used to lift sacks of grains and fertilizers onto his shoulders as part of his work, although he did not recollect any history of specific trauma. Skin biopsy revealed granulomatous reaction with Splendore-Hoeppli phenomenon, while periodic-acid-Schiff and Grocott-Gomori stains confirmed fungal elements. Sabouraud agar grew Chaetomium species, and lactophenol blue mount confirmed the fungus as Chaetomium strumarium. Radiography and computed tomography of the chest revealed intrathoracic extension of the mycetoma. The patient responded well to treatment with oral Itraconazole. Subcutaneous mycosis due to C. strumarium is rarely reported in the literature, and the intrathoracic extension makes it an even rarer entity. © 2015 British Association of Dermatologists.

Optimization of die filling in high pressure die cast part using MAGMAsoft®

DEFF Research Database (Denmark)

Kotas, Petr; Hattel, Jesper Henri

2008-01-01

Integrated modeling of an entire casting process has become a tool which favors design and optimization of manufactured parts. The aim of this project was to examine and optimize a high-pressure die cast part and its production process with respect to die filling and issues of residual stresses...... in the process and machine parameters were done and assessed. All simulations revealed that, the main causes of the problems were: a poor geometry of the casting leading to an improper filling pattern, and a massive gating system bringing thermal imbalance into the solidification process. Thus deformations due...... to residual stresses occurred. The numerical results were evaluated and appeared to be in agreement with the results from the actual manufacturing process. Based on these findings, proposals for improvements were given. In order to avoid distortions and cold shuts further geometrical adjustments should...

Unsteady hydraulic simulation of the cavitating part load vortex rope in Francis turbines

Science.gov (United States)

Brammer, J.; Segoufin, C.; Duparchy, F.; Lowys, P. Y.; Favrel, A.; Avellan, F.

2017-04-01

For Francis turbines at part load operation a helical vortex rope is formed due to the swirling nature of the flow exiting the runner. This vortex creates pressure fluctuations which can lead to power swings, and the unsteady loading can lead to fatigue damage of the runner. In the case that the vortex rope cavitates there is the additional risk that hydro-acoustic resonance can occur. It is therefore important to be able to accurately simulate this phenomenon to address these issues. In this paper an unsteady, multi-phase CFD model was used to simulate two part-load operating points, for two different cavitation conditions. The simulation results were validated with test-rig data, and showed very good agreement. These results also served as an input for FEA calculations and fatigue analysis, which are presented in a separate study.

Multiobjective spare part allocation by means of genetic algorithms and Monte Carlo simulation

International Nuclear Information System (INIS)

Marseguerra, Marzio; Zio, Enrico; Podofillini, Luca

2005-01-01

The management of spare parts is a major concern for several industrial organizations, due to the significant amount of resources invested every year for holding spares inventories. In this paper, we explore the possibility of using genetic algorithms for the task of optimizing the number of spare parts required by a multi-component system. To address the question of how many spares should be kept in inventory for each component kind, the analyst is required to define objective functions with respect to which the optimization is sought. In our work we will look at multiple objectives such as, for example, the maximization of system revenues and the minimization of the total spares volume. The modeling of the system failure, repair and replacement stochastic processes is done by means of Monte Carlo simulation, whose flexibility allows a closer adherence to reality

Specific features of phase distribution in a draught part of the tank type boiling water cooled reactor

International Nuclear Information System (INIS)

Fedulin, V.N.; Bartolomej, G.G.; Solodkij, V.A.; Shmelev, V.E.

1984-01-01

The results of experimental investigation of the two-phase flow structure in a draught part of the VK-50 boiling water cooled reactor are presented. A qualitative physical model of steam-water mixture flow in the large diameter draught part is suggested. It is shown that for hydrodynamically unstable two-phase flows a considerable nonuniformity in steam content distribution over the draught part volume which determines the possibility of the recirculating coolant flow formation in the peripheral zone is observed. At the draught part inlet the radial distribution of steam content is determined by the complex effects of power distribution and coolant flow rate change over the core radius. The flow structure in the lower section of the draught part adjoining to the core is determined to a considerable degree by a coolant jet outflow from fuel assembly (FA) nozzels Jet height depends on the velocity of outgoing two-phase flow, working pressure and hydrodynamics of the draught part. The jet height does not exceed 0.4 m for the K-50 reactor. Due to the increased steam outflow from the central FAs and the existence of radial pressure gradient the water-steam mixture is turned from the draught part periphery to its central part, where accelerated water steam flow with an increased steam content is formed. When a certain height is achieved a graduel expansion of the water-steam flow begins leading to equalizing the steam content over the draught part cross section

Pyelo-cystic Reflux in F-18 FDG PET Scan Due to Ureteral Obstruction

Energy Technology Data Exchange (ETDEWEB)

Reyhan, Mehmet [Baskent Univ., Adana (Turkmenistan)

2013-09-15

A 72-year-old woman with a history of cervical cancer was treated with brachytherapy and chemotherapy. Combined F-18 FDG PET/CT performed for restaging demonstrated increased FDG uptake in a hypodense cystic lesion at the posterior part of the right renal cortex and a hypermetabolic soft tissue mass at the right parailiac region suggestive of a metastatic lymph node causing ureteral obstruction. There had been no FDG uptake in the cystic lesion on the FDG PET/CT study performed 1 year before. These findings suggest that the increased FDG uptake in the cystic lesion was caused by pyelocystic reflux due to ureteral obstruction secondary to parailiac lymph node metastasis (Figs. 1 and 2). Several renal lesions may have increased metabolism, such as renal cell carcinoma, lymphoma, oncocytoma, adult Wilms' tumor, angiomyolipoma, metastatic lesions, xanthogranulo-matous pyelonephritis and infected cyst. Most of these lesions are solid. Some infected renal cysts may be FDG avid, but in this situation increased FDG uptake is observed on the wall of the cyst. In our case, FDG uptake was seen in the entire cystic lesion. The patient had no symptoms or laboratory findings related to infection. Cysts are the most common space-occupying lesions of the kidney. The vast majority of these are simple cysts that are usually unilateral and solitary. Simple cysts are asymptomatic, except when complications exist such as hemorrhage, infection or rupture. There have been a few reports on spontaneous communications between renal cysts and the pyelocaliceal system, in most cases involving ruptures of the cysts into the pyelocaliceal system due to increased intracystic pressure caused by bleeding or infection of the cyst. In the present case, the cause of the connection between the cystic cavity and the pyelocaliceal system is the increased pressure in the renal pelvic cavity due to the ureteral obstruction secondary to parailiac lymph node metastasis.

Applying hot wire anemometry to directly measure the water balance in a proton exchange membrane fuel cell - Part 1

DEFF Research Database (Denmark)

Berning, Torsten; Al Shakhshir, Saher

2015-01-01

In order to accurately determine the water balance of a proton exchange membrane fuel cell it has recently been suggested to employ constant temperature anemometry (CTA), a frequently used method to measure the velocity of a fluid stream. CTA relies on convective heat transfer around a heated wire...... the equations required to calculate the heat transfer coefficient and the resulting voltage signal as function of the fuel cell water balance. The most critical and least understood part is the determination of the Nusselt number to calculate the heat transfer between the wire and the gas stream. Different...... expressions taken from the literature will be examined in detail, and it will be demonstrated that the power-law approach suggested by Hilpert is the only useful one for the current purposes because in this case the voltage response from the hot-wire sensor E/E0 shows the same dependency to the water balance...

Plasma diffusion due to magnetic field fluctuations

International Nuclear Information System (INIS)

Okuda, H.; Lee, W.W.; Lin, A.T.

1979-01-01

Plasma diffusion due to magnetic field fluctuations has been studied in two dimensions for a plasma near thermal equilibrium and when the fluctuations are suprathermal. It is found that near thermal equilibrium electron diffusion varies as B -2 when the collisionless skin depth is greater than the thermal electron gyroradius and is generally smaller than the diffusion due to collisions or electrostatic fluctuations for a low-β plasma. When the suprathermal magnetic fluctuation exists because of macroscopic plasma currents, electron diffusion is enhanced due to the coalescence of current filaments and magnetic islands. Magnetic field energy is found to condense to the longest wavelength available in the system and stays there longer than the electron diffusion time scale

Pediatricians Working Part-Time Has Plateaued.

Science.gov (United States)

Cull, William L; Frintner, Mary Pat; O'Connor, Karen G; Olson, Lynn M

2016-04-01

To examine trends in pediatricians working part-time and residents seeking part-time work and to examine associated characteristics. The American Academy of Pediatrics (AAP) Periodic Survey of Fellows and the AAP Annual Survey of Graduating Residents were used to examine part-time employment. Fourteen periodic surveys were combined with an overall response rate of 57%. Part-time percentages were compared for surveys conducted from 2006-2009 and 2010-2013. The AAP Annual Surveys of Graduating Residents (combined response rate = 60%) from 2006-2009 were compared with 2010-2013 surveys for residents seeking and obtaining part-time positions following training. Multivariable logistic regression models identified characteristics associated with part-time work. Comparable percentages of pediatricians worked part-time in 2006-2009 (23%) and 2010-2013 (23%). There was similarly no statistically significant difference in residents seeking part-time work (30%-28%), and there was a slight decline in residents accepting part-time work (16%-13%, aOR .75, 95% CI .56-.96). Increases in working part-time were not found for any subgroups examined. Women consistently were more likely than men to work part-time (35% vs 9%), but they showed different patterns of part-time work across age. Women in their 40s (40%) were more likely than other women (33%) and men in their 60s (20%) were more likely than other men (5%) to work part-time. There has been a levelling off in the number of pediatricians working part-time and residents seeking part-time work. Overall, women remain more likely to work part-time, although 1 in 5 men over 60 work part-time. Copyright © 2016 Elsevier Inc. All rights reserved.

Bisecting real and fake body parts: effects of prism adaptation after right brain damage

Directory of Open Access Journals (Sweden)

Nadia eBolognini

2012-06-01

Full Text Available The representation of body parts holds a special status in the brain, due to their prototypical shape and the contribution of multisensory (visual and somatosensory-proprioceptive information. In a previous study (Sposito et al., 2010, we showed that patients with left unilateral spatial neglect exhibit a rightward bias in setting the mid-point of their left forearm, which becomes larger when bisecting a cylindrical object comparable in size. This body part advantage, found also in control participants, suggests partly different processes for computing the extent of body parts and objects. In this study we tested 16 right-brain-damaged patients, and 10 unimpaired participants, on a manual bisection task of their own (real left forearm, or a size-matched fake forearm. We then explored the effects of adaptation to rightward displacing prism exposure, which brings about leftward aftereffects. We found that all participants showed prism adaptation and aftereffects, with right-brain-damaged patients exhibiting a reduction of the rightward bias for both real and fake forearm, with no overall differences between them. Second, correlation analyses highlighted the role of visual and proprioceptive information for the metrics of body parts. Third, single-patient analyses showed dissociations between real and fake forearm bisections, and the effects of prism adaptation, as well as a more frequent impairment with fake body parts. In sum, the rightward bias shown by right-brain-damaged patients in bisecting body parts is reduced by prism exposure, as other components of the neglect syndrome; discrete spatial representations for real and fake body parts, for which visual and proprioceptive codes play different roles, are likely to exist. Multisensory information seems to render self bodily segments more resistant to the disruption brought about by right-hemisphere injury.

Making myself understood: perceived factors affecting the intelligibility of sung text.

Science.gov (United States)

Fine, Philip A; Ginsborg, Jane

2014-01-01

Singing is universal, and understanding sung words is thought to be important for many listeners' enjoyment of vocal and choral music. However, this is not a trivial task, and sung text intelligibility is probably affected by many factors. A survey of musicians was undertaken to identify the factors believed to have most impact on intelligibility, and to assess the importance of understanding sung words in familiar and unfamiliar languages. A total of 143 professional and amateur musicians, including singers, singing teachers, and regular listeners to vocal music, provided 394 statements yielding 851 references to one or more of 43 discrete factors in four categories: performer-related, listener-related, environment-related and words/music-related. The factors mentioned most frequently in each of the four categories were, respectively: diction; hearing ability; acoustic; and genre. In more than a third of references, the extent to which sung text is intelligible was attributed to the performer. Over 60% of respondents rated the ability to understand words in familiar languages as "very important," but only 17% when the text was in an unfamiliar language. Professional musicians (47% of the sample) rated the importance of understanding in both familiar and unfamiliar languages significantly higher than amateurs but listed fewer factors overall and fewer listener-related factors. The more important the respondents rated understanding, the more performer-related and environment-related factors they tended to list. There were no significant differences between the responses of those who teach singing and those who do not. Enhancing sung text intelligibility is thus perceived to be within the singer's control, at least to some extent, but there are also many factors outside their control. Empirical research is needed to explore some of these factors in greater depth, and has the potential to inform pedagogy for singers, composers, and choral directors.

Muslim fundamentalism: something to be understood or to be explained away?

NARCIS (Netherlands)

Bruinessen, M.M. van

1995-01-01

This article surveys various attempts to make sociological sense of the diverse Muslim movements often lumped together under the label of fundamentalism. Explanations of fundamentalism as a form of resistance to modernization or those reducing it to social and economic discontent may have some

Radiation damage in the mouse female germ cell: a two-part study

International Nuclear Information System (INIS)

Wuebbles, B.

1978-07-01

In 1977 the average annual airborne gross beta activity in Livermore Valley air samples was 1.2 x 10 -13 μCi/ml, nearly twice the average observed during 1976 (7.6 x 10 -14 μCi/ml). The increase was partly due to an atmosphere nuclear test by the Peoples Republic of China. Concentrations of various radionuclides ( 235 U, 238 U, 137 Cs, 238 Pu, 239 Pu, and tritium in samples of surface air, surface waters, groundwater, soils, and food are reported. Results of aerial radiological surveys are included

Effectiveness of early part-time sick leave in musculoskeletal disorders

Directory of Open Access Journals (Sweden)

Karppinen Jaro

2008-02-01

Full Text Available Abstract Background The importance of staying active instead of bed rest has been acknowledged in the management of musculoskeletal disorders (MSDs. This emphasizes the potential benefits of adjusting work to fit the employee's remaining work ability. Despite part-time sick leave being an official option in many countries, its effectiveness has not been studied yet. We have designed a randomized controlled study to assess the health effects of early part-time sick leave compared to conventional full-day sick leave. Our hypothesis is that if work time is temporarily reduced and work load adjusted at the early stages of disability, employees with MSDs will have less disability days and faster return to regular work duties than employees on a conventional sick leave. Methods/Design The study population will consist of 600 employees, who seek medical advice from an occupational physician due to musculoskeletal pain. The inclusion requires that they have not been on a sick leave for longer than 14 days prior to the visit. Based on the physician's judgement, the severity of the symptoms must indicate a need for conventional sick leave, but the employee is considered to be able to work part-time without any additional risk. Half of the employees are randomly allocated to part-time sick leave group and their work time is reduced by 40–60%, whereas in the control group work load is totally eliminated with conventional sick leave. The main outcomes are the number of days from the initial visit to return to regular work activities, and the total number of sick leave days during 12 and 24 months of follow-up. The costs and benefits as well as the feasibility of early part-time sick leave will also be evaluated. Conclusion This is the first randomised trial to our knowledge on the effectiveness of early part-time sick leave compared to conventional full-time sick leave in the management of MSDs. The data collection continues until 2011, but preliminary

Parts Quality Management: Direct Part Marking via Data Matrix Symbols for Mission Assurance

Science.gov (United States)

Moss, Chantrice

2013-01-01

A United States Government Accountability Office (GAO) review of twelve NASA programs found widespread parts quality problems contributing to significant cost overruns, schedule delays, and reduced system reliability. Direct part-marking with Data Matrix symbols could significantly improve the quality of inventory control and parts lifecycle management. This paper examines the feasibility of using 15 marking technologies for use in future NASA programs. A structural analysis is based on marked material type, operational environment (e.g., ground, suborbital, orbital), durability of marks, ease of operation, reliability, and affordability. A cost-benefits analysis considers marking technology (data plates, label printing, direct part marking) and marking types (two-dimensional machine-readable, human-readable). Previous NASA parts marking efforts and historical cost data are accounted for, including in-house vs. outsourced marking. Some marking methods are still under development. While this paper focuses on NASA programs, results may be applicable to a variety of industrial environments.

Analytical studies by activation. Part A and B: Counting of short half-life radio-nuclides. Part C: Analytical programs for decay curves

International Nuclear Information System (INIS)

Junod, E.

1966-03-01

Part A and B: Since a radio-nuclide of short half-life is characterized essentially by the decrease in its activity even while it is being measured, the report begins by recalling the basic relationships linking the half-life the counting time, the counting rate and the number of particles recorded. The second part is devoted to the problem of corrections for counting losses due to the idle period of multichannel analyzers. Exact correction formulae have been drawn up for the case where the short half-life radionuclide is pure or contains only a long half-life radio-nuclide. By comparison, charts have been drawn up showing the approximations given by the so-called 'active time' counting and by the counting involving the real time associated with a measurement of the overall idle period, this latter method proving to be more valid than the former. A method is given for reducing the case of a complex mixture to that of a two-component mixture. Part C: The problems connected with the qualitative and quantitative analysis of the decay curves of a mixture of radioactive sources of which one at least has a short half-life are presented. A mathematical description is given of six basic processes for which some elements of Fortran programs are proposed. Two supplementary programs are drawn up for giving an overall treatment of problems of dosage in activation analysis: one on the basis of a simultaneous irradiation of the sample and of one or several known samples, the other with separate irradiation of the unknown and known samples, a dosimeter (activation, or external) being used for normalizing the irradiation flux conditions. (author) [fr

Etching microscopic defects in polycarbonate due to high dose ArF or KrF laser exposure

Energy Technology Data Exchange (ETDEWEB)

Jaleh, B. [Physics Department, Bu- Alisina University, Hamadan (Iran, Islamic Republic of); Parvin, P. [Physics Department, Amirkabir University, P.O. Box 15875-4413, Hafez Ave, Tehran (Iran, Islamic Republic of) and Laser Research Center, Atomic Energy Organization of Iran, AEOI, Tehran (Iran, Islamic Republic of) ]. E-mail: parvin@aut.ac.ir; Katoozi, M. [National Radiation Protection Department, AEOI, Tehran (Iran, Islamic Republic of); Zamani, Z. [Laser Research Center, Atomic Energy Organization of Iran, AEOI, Tehran (Iran, Islamic Republic of); Zare, A. [Laser Research Center, Atomic Energy Organization of Iran, AEOI, Tehran (Iran, Islamic Republic of)

2005-11-15

The ArF or KrF excimer laser exposure on the polycarbonate (PC) with corresponding doses higher than {phi}{sub th}5.2J/cm{sup 2}, at 32mJ/cm{sup 2} fluence per pulse and 5Hz pulse repetition rate (PRR), induces regular defects leading to self assembled defect structure following electrochemical etching (ECE). We have observed the conical-like structure for {phi}>{phi}{sub th}, whereas the polymer experiences hardening effect due to crosslinking when {phi}<{phi}{sub th}. Subsequently, conical-like, structure turns into track-like pits developing under ECE multiple treeing. Self assembled defect structure may be seen by naked eye as white spots, despite SEM illustrates a type of periodic pit formation-morphology. The exact explanation of the effect is not well understood yet. It looks like alpha tracks in the polymer surface, however the PC pieces were simply treated by excimer lasers at high doses, and they have not been exposed to the nuclear particles afterwards. We could not observe those effects at 308nm (XeCl laser) or longer wavelengths at 351nm (XeF laser) where UV photoablation does not occur. It indicates that UV ablation establishes surface degradation at shorter wavelengths, leading to laser micro etching. The mean track (defect) density is about one order of magnitude greater than the normal alpha tracks. Increasing UV doses, polymer undergoes a plateau, corresponding to etched defect saturation on PC.

Etching microscopic defects in polycarbonate due to high dose ArF or KrF laser exposure

International Nuclear Information System (INIS)

Jaleh, B.; Parvin, P.; Katoozi, M.; Zamani, Z.; Zare, A.

2005-01-01

The ArF or KrF excimer laser exposure on the polycarbonate (PC) with corresponding doses higher than φ th 5.2J/cm 2 , at 32mJ/cm 2 fluence per pulse and 5Hz pulse repetition rate (PRR), induces regular defects leading to self assembled defect structure following electrochemical etching (ECE). We have observed the conical-like structure for φ>φ th , whereas the polymer experiences hardening effect due to crosslinking when φ th . Subsequently, conical-like, structure turns into track-like pits developing under ECE multiple treeing. Self assembled defect structure may be seen by naked eye as white spots, despite SEM illustrates a type of periodic pit formation-morphology. The exact explanation of the effect is not well understood yet. It looks like alpha tracks in the polymer surface, however the PC pieces were simply treated by excimer lasers at high doses, and they have not been exposed to the nuclear particles afterwards. We could not observe those effects at 308nm (XeCl laser) or longer wavelengths at 351nm (XeF laser) where UV photoablation does not occur. It indicates that UV ablation establishes surface degradation at shorter wavelengths, leading to laser micro etching. The mean track (defect) density is about one order of magnitude greater than the normal alpha tracks. Increasing UV doses, polymer undergoes a plateau, corresponding to etched defect saturation on PC

Seasonal variability of rocky reef fish assemblages: Detecting functional and structural changes due to fishing effects

Science.gov (United States)

Henriques, Sofia; Pais, Miguel Pessanha; Costa, Maria José; Cabral, Henrique Nogueira

2013-05-01

The present study analyzed the effects of seasonal variation on the stability of fish-based metrics and their capability to detect changes in fish assemblages, which is yet poorly understood despite the general idea that guilds are more resilient to natural variability than species abundances. Three zones subject to different levels of fishing pressure inside the Arrábida Marine Protected Area (MPA) were sampled seasonally. The results showed differences between warm (summer and autumn) and cold (winter and spring) seasons, with the autumn clearly standing out. In general, the values of the metrics density of juveniles, density of invertebrate feeders and density of omnivores increased in warm seasons, which can be attributed to differences in recruitment patterns, spawning migrations and feeding activity among seasons. The density of generalist/opportunistic individuals was sensitive to the effect of fishing, with higher values at zones with the lowest level of protection, while the density of individuals with high commercial value only responded to fishing in the autumn, due to a cumulative result of both juveniles and adults abundances during this season. Overall, this study showed that seasonal variability affects structural and functional features of the fish assemblage and that might influence the detection of changes as a result of anthropogenic pressures. The choice of a specific season, during warm sea conditions after the spawning period (July-October), seems to be more adequate to assess changes on rocky-reef fish assemblages.

Greenhouse effect due to atmospheric nitrous oxide

Science.gov (United States)

Yung, Y. L.; Wang, W. C.; Lacis, A. A.

1976-01-01

The greenhouse effect due to nitrous oxide in the present atmosphere is about 0.8 K. Increase in atmospheric N2O due to perturbation of the nitrogen cycle by man may lead to an increase in surface temperature as large as 0.5 K by 2025, or 1.0 K by 2100. Other climatic effects of N2O are briefly discussed.

Prélèvement extérieur et norme de salaire Deductions Due to Externat Causes and Salary Standards

Directory of Open Access Journals (Sweden)

Chaouat A.

2006-11-01

Full Text Available L'article résume une thèse ayant trait aux problèmes macroéconomiques des prélèvements extérieurs (hausse du prix du pétrole, choc dollar, etc. et de l'évolution des salaires réels. Deux questions ont été plus particulièrement étudiées : d'une part, la courbe optimale de progression des salaires réels en cas de prélèvement extérieur, et d'autre part, l'évolution actuelle à préconiser en France, compte tenu de l'historique de la répartition sur les revenus des agents intérieurs des ponctions induites par les deux chocs pétroliers. This article sums up a doctoral thesis on the macroeconomic problems of deductions due to externat causes (oil price increase, impact of the dollar exchange rate, etc. and the evolution of real wages. Two subjects are give more specific attention: (1 the optimum curve of the progression of real wages if a deduction due to externat causes occurs; (2 the present evolution to be recommended in France, taking into account the history of the impact on incomes of the interior agents caused by the drains induced by the two oil price shocks.

Social representations and information security of children and adolescents: the point of view of teachers (Part 1

Directory of Open Access Journals (Sweden)

Bovina I.B.

2017-04-01

Full Text Available The focus of attention of the authors is the consideration of information security of children and adolescents as the object of social representations. Discusses the need for the theory of social representations to develop prophylactic and preventive programs in the field of information security of children and adolescents, in particular, says that the effectiveness of prevention and preventive programs is determined by how this information is understood by the target group, through what filters it passes. Briefly outlines the main provisions of the theory of social representations, discusses the functions of social representations, the mechanism of action ideas. Analyzed in a few studies, the focus of which was the presentation on new technologies, particularly mobile phones and the Internet. Presents the results of a series of studies devoted to the study of information security of children and adolescents, including the results of the first part of a research project dedicated to the analysis of how parents and teachers understand information security and what strategies to protect children and adolescents from dangerous information they are ready to use.

Design of site specific radiopharmaceuticals for tumor imaging. (Parts I and II)

International Nuclear Information System (INIS)

Van Dort, M.E.

1983-01-01

Part I. Synthetic methods were developed for the preparation of several iodinated benzoic acid hydrazides as labeling moieties for indirect tagging of carbonyl-containing bio-molecules and potential tumor-imaging agents. Biodistribution studies conducted in mice on the derivatives having the I-125 label ortho to a phenolic OH demonstrated a rapid in vivo deiodination. Part II. The reported high melanin binding affinity of quinoline and other heterocyclic antimalarial drugs led to the development of many analogues of such molecules as potential melanoma-imaging agents. Once such analogue iodochloroquine does exhibit high melanin binding, but has found limited clinical use due to appreciable accumulation in non-target tissues such as the adrenal cortex and inner ear. This project developed a new series of candidate melanoma imaging agents which would be easier to radio-label, could yield higher specific activity product, and which might demonstrate more favorable pharmacokinetic and dosimetric characteristics compared to iodochloroquine

Markov chain-based mass estimation method for loose part monitoring system and its performance

Directory of Open Access Journals (Sweden)

Sung-Hwan Shin

2017-10-01

Full Text Available A loose part monitoring system is used to identify unexpected loose parts in a nuclear reactor vessel or steam generator. It is still necessary for the mass estimation of loose parts, one function of a loose part monitoring system, to develop a new method due to the high estimation error of conventional methods such as Hertz's impact theory and the frequency ratio method. The purpose of this study is to propose a mass estimation method using a Markov decision process and compare its performance with a method using an artificial neural network model proposed in a previous study. First, how to extract feature vectors using discrete cosine transform was explained. Second, Markov chains were designed with codebooks obtained from the feature vector. A 1/8-scaled mockup of the reactor vessel for OPR1000 was employed, and all used signals were obtained by impacting its surface with several solid spherical masses. Next, the performance of mass estimation by the proposed Markov model was compared with that of the artificial neural network model. Finally, it was investigated that the proposed Markov model had matching error below 20% in mass estimation. That was a similar performance to the method using an artificial neural network model and considerably improved in comparison with the conventional methods.

Recursive estimation of the parts production process quality indicator

Directory of Open Access Journals (Sweden)

Filipovich Oleg

2017-01-01

Full Text Available Consideration is given to a mathematical representation for manufacturing of batch parts on a metal-cutting machine tool. Linear dimensions of machined parts are assumed to be the major quality indicator, deviation from these dimensions is determined by size setting of machine tool and ensemble of random factors. It is allowed to have absolutely precise pre-setting of machine tool, effects from setup level offsetting due to deformation in process equipment on the specified indicator are disregarded. Consideration is given to factors which affect the tool wear, with two definitions of tool wear being provided. Reasons for development of random error in processing, dependence of measurement results on error as well as distribution laws and some parameters of random values are provided. To evaluate deviation of size setting value in each cycle, it is proposed to apply a recursive algorithm in description of investigated dynamic discrete process in the space state. Kalman filter equations are used in description of process model by means of first-order difference equations. The algorithm of recursive estimation is implemented in the mathematical software Maple. Simulation results which prove effectiveness of algorithm application to investigate the given dynamic system are provided. Variants of algorithm application and opportunities of further research are proposed.

Effects on fatigue life of gate valves due to higher torque switch settings during operability testing

International Nuclear Information System (INIS)

Richins, W.D.; Snow, S.D.; Miller, G.K.; Russell, M.J.; Ware, A.G.

1995-12-01

Some motor operated valves now have higher torque switch settings due to regulatory requirements to ensure valve operability with appropriate margins at design basis conditions. Verifying operability with these settings imposes higher stem loads during periodic inservice testing. These higher test loads increase stresses in the various valve internal parts which may in turn increase the fatigue usage factors. This increased fatigue is judged to be a concern primarily in the valve disks, seats, yokes, stems, and stem nuts. Although the motor operators may also have significantly increased loading, they are being evaluated by the manufacturers and are beyond the scope of this study. Two gate valves representative of both relatively weak and strong valves commonly used in commercial nuclear applications were selected for fatigue analyses. Detailed dimensional and test data were available for both valves from previous studies at the Idaho National Engineering Laboratory. Finite element models were developed to estimate maximum stresses in the internal parts of the valves and to identity the critical areas within the valves where fatigue may be a concern. Loads were estimated using industry standard equations for calculating torque switch settings prior and subsequent to the testing requirements of USNRC Generic Letter 89--10. Test data were used to determine both; (1) the overshoot load between torque switch trip and final seating of the disk during valve closing and (2) the stem thrust required to open the valves. The ranges of peak stresses thus determined were then used to estimate the increase in the fatigue usage factors due to the higher stem thrust loads. The usages that would be accumulated by 100 base cycles plus one or eight test cycles per year over 40 and 60 years of operation were calculated

WSA index as an indicator of soil degradation due to erosion

Science.gov (United States)

Jaksik, Ondrej; Kodesova, Radka; Schmidtova, Zuzana; Kubis, Adam; Fer, Miroslav; Klement, Ales; Nikodem, Antonin

2014-05-01

Knowledge of spatial distribution of soil aggregate stability as an indicator of soil degradation vulnerability is required for many scientific and practical environmental studies. The goal of our study was to assess predisposition of different soil types to change aggregate stability due to erosion. Five agriculture arable lands with different soil types were chosen. The common feature of these sites is relatively large slope and thus soils are impacted by water erosion. The first studied area was in Brumovice. The original soil type was Haplic Chernozem on loess, which was due to erosion changed into Regosol (steep parts) and Colluvial soil (base slope and the tributary valley). A similar process has been described at other four locations Vidim, Sedlcany, Zelezna and Hostoun, where the original soil types were Haplic Luvisol on loess and Haplic Cambisol on gneiss, Haplic Cambisol on shales, and Calcaric Cambisol on marlstone, respectively. The regular and semi-regular soil sampling grids were set at all five sites. The basic soil properties were measured and stability of soil aggregates (WSA index) was evaluated. In all cases, the higher aggregates stability was observed in soils, which were not (or only slightly) affected by water erosion and at base slope and the tributary valley (eroded soil particle accumulation). The lowest aggregate stability was measured at the steepest parts. When comparing individual sites, the highest WSA index, e.g. aggregate stability, was found in Sedlcany (Cambisol). Lower WSA indexes were measured on aggregates from Hostoun (Cambisol), Zelezna (Cambisol), Vidim (Luvisol) and the lowest values were obtained in Brumovice (Chernozem). The largest WSA indexes for Cambisols in comparison to Luvisols and Chernozem could be attributed to higher organic matter content and presence of iron oxides. Slightly higher aggregate stability of Luvisols in comparison to Chernozem, could be explained by the positive influence of clay (especially in

Biostatistics primer: part I.

Science.gov (United States)

Overholser, Brian R; Sowinski, Kevin M

2007-12-01

Biostatistics is the application of statistics to biologic data. The field of statistics can be broken down into 2 fundamental parts: descriptive and inferential. Descriptive statistics are commonly used to categorize, display, and summarize data. Inferential statistics can be used to make predictions based on a sample obtained from a population or some large body of information. It is these inferences that are used to test specific research hypotheses. This 2-part review will outline important features of descriptive and inferential statistics as they apply to commonly conducted research studies in the biomedical literature. Part 1 in this issue will discuss fundamental topics of statistics and data analysis. Additionally, some of the most commonly used statistical tests found in the biomedical literature will be reviewed in Part 2 in the February 2008 issue.

FORMATION OF TOILET HABITS IN CHILDREN IN MOSCOW. RETROSPECTIVE STUDY RESULTS. PART II

Directory of Open Access Journals (Sweden)

G. A. Karkashadze

2013-01-01

Full Text Available The results of the first Russian study of toilet habits formation in children have been obtained. The article was planned to be published in 2 subsequent parts due to the extensiveness of the material. This article is the 2nd part*. It presents and comments on the remaining part of results in the form of the connection between main parameters and characteristics of toilet habits training processes and physiological, psychological and social factors; it also presents the discussion and conclusions. Comparative data (with foreign studies is given. A multitude of both physiological and social factors affect the process of children’s toilet habits training. The following physiological factors have been revealed: stool frequency, physiological involuntary night urination, peculiarities of falling asleep and pernicious habits – processes, which reflect the intestinal motility regulation and defecation states, urination control and neuropsychic activity. The selected training strategy and tactics, style of communication with a child also affect the training process. The most influential family-social factors in terms of toilet habits training processes are: two- or one-parent family, mother’s education and twins in the family. 

Quantifying the Limitation to World Cereal Production Due To Soil Phosphorus Status

Science.gov (United States)

Kvakić, Marko; Pellerin, Sylvain; Ciais, Philippe; Achat, David L.; Augusto, Laurent; Denoroy, Pascal; Gerber, James S.; Goll, Daniel; Mollier, Alain; Mueller, Nathaniel D.; Wang, Xuhui; Ringeval, Bruno

2018-01-01

Phosphorus (P) is an essential element for plant growth. Low P availability in soils is likely to limit crop yields in many parts of the world, but this effect has never been quantified at the global scale by process-based models. Here we attempt to estimate P limitation in three major cereals worldwide for the year 2000 by combining information on soil P distribution in croplands and a generic crop model, while accounting for the nature of soil-plant P transport. As a global average, the diffusion-limited soil P supply meets the crop's P demand corresponding to the climatic yield potential, due to the legacy soil P in highly fertilized areas. However, when focusing on the spatial distribution of P supply versus demand, we found strong limitation in regions like North and South America, Africa, and Eastern Europe. Averaged over grid cells where P supply is lower than demand, the global yield gap due to soil P is estimated at 22, 55, and 26% in winter wheat, maize, and rice. Assuming that a fraction (20%) of the annual P applied in fertilizers is directly available to the plant, the global P yield gap lowers by only 5-10%, underlying the importance of the existing soil P supply in sustaining crop yields. The study offers a base for exploring P limitation in crops worldwide but with certain limitations remaining. These could be better accounted for by describing the agricultural P cycle with a fully coupled and mechanistic soil-crop model.

8 . TOTAL THRUST ON EARTH-RETAlNING STRUCTURES DUE ...

African Journals Online (AJOL)

The various surcharges along retaining walls may include vehicle loads ... be developed from ice formation due to pore water freezing. ... Figure 1 Lateral pressure against rigid wall due to ... value for the case of a line load is due to the effect.

Part Objects and Their Location

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann; Møller-Pedersen, Birger

1992-01-01

The notion of location of part objects is introduced, yielding a reference to the containing object. Combined with locally defined objects and classes (block structure), singularly defined part objects, and references to part objects, it is a powerful language mechanism for defining objects...

Work-in-progress report on maintenance good practices for motors in nuclear power generating stations - Part 2

International Nuclear Information System (INIS)

Eckstein, E.R.; Hall, A.R.; Kasper, S.; Smith, P.R.; Subudhi, M.

1988-01-01

Motor maintenance is addressed by a variety of industry standards, utility procedures and manufacture's instructions, as well as by recently published assessments of nuclear and non-nuclear operating experience and motor reliability data. This experience supports the premise that motor failure rates are in large part related to application stress factors such as operating time, environmental factors and vibration. Due to the large number of critical motors installed in a nuclear generating station, additional considerations are necessary to effectively schedule their preventive maintenance activities. Therefore, in this part, a method for prioritizing motor maintenance based on application stresses experienced by the motors is presented

Researches concerning the ultasonic energy influence on the resistence to the abrasive wear of loaded welded parts

Directory of Open Access Journals (Sweden)

Gh. Amza

2013-01-01

Full Text Available The researches presented in the paper refer to the effect of ultrasounds propagation in the liquid metal bath on the process of transferring the additive material through the electric arch and on the crystallization process, and all these effects are analyzed for loaded welded parts solicited at the abrasive wear. All these influences are conferred to these two basic phenomena due to the ultrasounds propagation in liquid environments, namely, ultra-acoustic cavitation and acceleration of the diffusion process. The results concerns the resistance to the wear obtained for the loaded parts through manual welding with electric arch and classically covered electrode and ultrasonically activated.

Hygienic estimation of population doses due to stratospheric fallout

International Nuclear Information System (INIS)

Marej, A.N.; Knizhnikov, V.A.

1980-01-01

The hygienic estimation of external and internal irradiation of the USSR population due to stratospheric global fallouts of fission products after nuclear explosions and weapon tests, is carried out. Numerical values which characterize the dose-effect dependence in the case of radiation of marrow, bone tissue and whole body are presented. Values of mean individual and population doses of irradiation due to global fallouts within 1963-1975, types of injury and the number of mortal cases due to malignant neoplasms are presented. A conclusion is made that the contribution of radiation due to stratospheric fallouts in the mortality due to malignant neoplasms is insignificant. Annual radiation doses, conditioned by global fallouts within the period of 1963-1975 constitute but several percent from the dose of radiation of the natural radiation background. Results of estimation of genetic consequences of irradiation due to atmospheric fallouts are presented

Development of Aircraft Sandwich Parts

Directory of Open Access Journals (Sweden)

J. Křena

2000-01-01

Full Text Available The presented paper shows the design and development process of sandwich parts. A spoiler plate and a main landing gear door are developed. Sandwich parts are made of C/E composite facings and a foam core. FE models have been used for optimization of structures. Emphasis has been placed on deformations of parts under a few load cases. Experimental tests have been used for a verification of structure parts loaded by concentrated forces.

Diurnally varying annoyance due to railway and road traffic noise; Laermbelaestigung durch Strassen- und Schienenverkehr zu unterschiedlichen Tageszeiten

Energy Technology Data Exchange (ETDEWEB)

Schreckenberg, D. [Zentrum fuer Angewandte Psychologie, Umwelt- und Sozialforschung (ZEUS GmbH), Bochum (Germany); Guski, R. [Ruhr-Univ. Bochum, Fakultaet fuer Psychologie, Bochum (Germany)

2005-07-01

One of the most prominent non-auditory effects of noise influencing the life quality of human beings is the disturbance of activities (i.e. communicating, relaxing, working, sleeping). The disturbance of activities results in noise annoyance, and in the long run may lead to further health effects. Due to the fact that activities vary diurnally it is plausible to assume that peoples'' responses to noise differ depending on the times of day. The aim of the study, which is part of the German research network ''Quiet Traffic'' is to provide empirical data of dose-response relationships for different times of day (excluding the night). 1110 residents from four areas with dominant road traffic noise (683 subjects) and from two areas with dominant railway noise (427 subjects) have been asked in a face-to-face interview for contentment with house and living environment and noise reactions. 131 persons of the total sample took part in an additional study (experience-sampling study) in which the hourly noise annoyance was measured for three consecutive days using a handheld computer. For each subject individual source-specific immission noise level for each hour of the day has been calculated. There is higher annoyance due to road traffic noise in the late afternoon/evening from 4 pm to 7 pm. For railway noise higher annoyance is reported in the evening from 6 pm to 10 am. The reported differences in noise annoyance depending on the times of day are higher with increasing noise level. (orig.)

Band magnetism due to f-electrons

International Nuclear Information System (INIS)

Brodsky, M.B.; Trainor, R.J.

1976-01-01

Specific heat data illustrate several types of itinerant or band magnetism in actinide intermetallic compounds. The results show ferromagnetic spin fluctuations in UAl 2 with T/sub sf/ equals 25K, itinerant antiferromagnetism in NpSn 3 with T/sub N/ equals 9.5K and itinerant ferromagnetism in NpOs 2 with T/sub C/ equals 7.9K. Specific heat studies of dilute U/sub 1-x/Th/sub x/Al 2 show the theoretically predicted modifications due to impurity scattering in a spin fluctuation system. For NpSn 3 it is possible to show the BCS nature of the transition due to the gap formation

Physical properties of sand parts produced using a Voxeljet VX1000 three-dimensional printer

Directory of Open Access Journals (Sweden)

Nyembwe, Kasongo

2016-11-01

Full Text Available Successful case studies of metal casting applications using sand moulds and cores produced by additive manufacturing (AM processes have been widely reported in the literature. The layered- based manufacturing process has revolutionised traditional sand moulding methods. This is essentially due to the numerous advantages of AM, including the reduction of design lead time and the ability to manufacture objects with complex geometry in a rapid turnaround time. Locally-available AM processes that are capable of producing sand moulds and cores include laser sintering (LS and three-dimensional printing (3DP, with the latter AM process growing in dominance over the former. However, a better understanding of the properties of parts produced by AM processes is required in order for the processes to be fully adopted by the foundry industry. Crucial characteristics of 3DP sand parts related to strength, dimensional accuracy, and hardness are not well- known in terms of their magnitude and in comparison with conventionally-moulded sand parts. In this investigation, the physical properties of test specimens produced under standard manufacturing conditions, using a Voxeljet VX1000 machine, were assessed for bend and tensile strength, hardness, friability, and surface finish. The physical properties of the 3DP test specimens were then compared with the properties of laboratory hand- rammed test specimens. The results of the investigation suggest that the properties of AM-fabricated sand parts are inferior to sand parts produced by conventional moulding processes.

IMPROVING AIRCRAFT PARTS DUE TO USING NANO-COMPOSITE AND MICRO-COMPOSITE MATERIAL

Directory of Open Access Journals (Sweden)

Hassany Merhdad Boer

2017-01-01

Full Text Available In this paper it is investigated how to make composite carbon nanofiber/ epoxy resin and carbon micro-fiber / epoxy resin. Also, these materials' features are compared and it is shown how effective and benefitial are the received products containing carbon nano- and micro-fibers.In this study, epoxy composites were prepared in order to improve their mechanical and electrical properties. Ergo, carbon nanofibers and carbon microfibers were used as fillers. On the one hand, purchased microfibers were incorporatedinto the epoxy resin to produce epoxy/carbon microfiber composites via mechanical mixing at 1800 rpm in different concentrations (0.0125, 0.0225, 0.05, and 0.1.On the other hand, carbon nanofibers were prepared via electrospining method at room temperature, then epoxy/carbon nanofiber nanocomposites were prepared at mixing temperature of 60 °C at 1200 rpm at different concentrations (0.0125, 0.05, and 0.1.Morphology of samples was investigated via Field Emission Scanning Electron Microscopy (FESEM. Mechanical properties of samples were investigated via tensile and bending tests. Tensile test results revealed that incorporation of 0.0125 wt% carbon naofibers increased the epoxy resins modulus about 200%. Bending strength of sample containing 0.1wt% carbon microfibers had the most increment (from 20 to 100 MPa.

Evaluation of ingestion dose to different age groups of public of Chutka (MP) environment due to 40K

International Nuclear Information System (INIS)

Tejpal, Menaria; Tiwari, S.N.; Mulchandani, U.; Goyal, S.; Ravi, P.M.; Tripathi, R.M.

2014-01-01

The activity levels of 40 K in the locally produced biological samples of food items as well as trend indicator samples from different locations of Chutka area of Madhya Pradesh site, were estimated by gamma spectrometry as part of preoperational survey. The observed 40 K activity in these samples is comparable with reported values from other areas of India. The annual effective dose through ingestion pathway due to 40 K is estimated for infant, child and adult categories of local population. The computed average ingestion dose due to intake of 40 K is found to be highest for infant child (0.34 mSv/y). Radionuclides enter the human body through complex mechanism including foodstuffs via the food chain. The most predominant naturally occurring radionuclides in foodstuffs is 40 K, other contributions to the radionuclides in foods include deposited fallouts from fission and activation products released during nuclear accidents and constituents of weapons tests released after detonation. The primary objective of the present study is to estimate the activity levels of 40 K in the dietary matrices and to evaluate internal dose due to annual intake of various dietary items by the population around Chutka environment, a proposed nuclear power station site near Jabalpur of Madhya Pradesh

Solving a mathematical model integrating unequal-area facilities layout and part scheduling in a cellular manufacturing system by a genetic algorithm.

Science.gov (United States)

Ebrahimi, Ahmad; Kia, Reza; Komijan, Alireza Rashidi

2016-01-01

In this article, a novel integrated mixed-integer nonlinear programming model is presented for designing a cellular manufacturing system (CMS) considering machine layout and part scheduling problems simultaneously as interrelated decisions. The integrated CMS model is formulated to incorporate several design features including part due date, material handling time, operation sequence, processing time, an intra-cell layout of unequal-area facilities, and part scheduling. The objective function is to minimize makespan, tardiness penalties, and material handling costs of inter-cell and intra-cell movements. Two numerical examples are solved by the Lingo software to illustrate the results obtained by the incorporated features. In order to assess the effects and importance of integration of machine layout and part scheduling in designing a CMS, two approaches, sequentially and concurrent are investigated and the improvement resulted from a concurrent approach is revealed. Also, due to the NP-hardness of the integrated model, an efficient genetic algorithm is designed. As a consequence, computational results of this study indicate that the best solutions found by GA are better than the solutions found by B&B in much less time for both sequential and concurrent approaches. Moreover, the comparisons between the objective function values (OFVs) obtained by sequential and concurrent approaches demonstrate that the OFV improvement is averagely around 17 % by GA and 14 % by B&B.

Formal Development of the HRP Prover - Part 1: Syntax and Semantics

International Nuclear Information System (INIS)

Sivertsen, Terje

1996-01-01

This report describes the formal development of a new version of the HRP Prover. The new version of the tool will have functionality almost identical to the current version, but is developed in accordance to established principles for applying algebraic specification in formal software development. The development project provides results of relevance to the formal development of a wide range of language-oriented tools, including programming language compilers, as well as to the automatic generation of code from specifications. Since the overall scope of this report is the analysis of algebraic specifications, emphasis is given to topics related to what is usually understood as the ''front end'' of compilers. This includes lexical and syntax analysis of the specifications, static semantics through type checking, and dynamic semantics through evaluation. All the different phases are specified in algebraic specification and supported by the current version of the HRP Prover. In subsequent work, the completed parts of the new version will complement the tool support in the development. The work presented will be followed up by formal specification of theorem proving and transformation, as well as code generation into conventional programming languages. The new version of the HRP Prover is incrementally developed in coherence with the specifications produced in these activities. At the same time, the development of the tool demonstrates the efficient use of the methodology through real application on an increasingly important class of software. (author)

Stochastic motion due to a single wave in a magnetoplasma

International Nuclear Information System (INIS)

Smith, G.R.

1979-01-01

A single electrostatic wave in a magnetoplasma causes stochastic ion motion in several physically different situations. Various magnetic fields (uniform, tokamak, and mirror) and various propagation angles with respect to the field have been studied. A brief review of this work shows that all situations can be understood using the concept of overlapping resonances. Analytical calculations of the wave amplitude necessary for stochasticity have been carried out in some cases and compared with computer and laboratory experiments. In the case of an axisymmetric mirror field the calculations predict stochastic motion of ions with energy below a threshold that depends weakly on the wave amplitude and on the scale lengths of the magnetic field. Studies with an azimuthally asymmetric field show that the asymmetry causes substantial changes in the motion of some ions

Hereditary mixed polyposis syndrome due to a BMPR1A mutation.

LENUS (Irish Health Repository)

O'Riordan, J M

2010-06-01

The conditions Juvenile Polyposis Syndrome (JPS) and Hereditary Mixed Polyposis Syndrome (HMPS) are associated with an increased risk of colorectal carcinoma. The genetic mechanisms which explain these conditions have until recently been poorly understood. Recent interest has focused on the transforming growth factor (TGF)-beta signalling pathway and, in particular, on mutations in the SMAD4 gene. However, not all cases of JPS and HMPS have mutations in SMAD4 and focus has now shifted to other components of the TGF-beta pathway to clarify the genetic mechanisms involved in these conditions. In this report, we describe the significance of a bone morphogenetic protein receptor type 1A gene mutation in an Irish family.

Exploring Water Pollution. Part II

Science.gov (United States)

Rillo, Thomas J.

1975-01-01

This is part two of a three part article related to the science activity of exploring environmental problems. Part one dealt with background information for the classroom teacher. Presented here is a suggested lesson plan on water pollution. Objectives, important concepts and instructional procedures are suggested. (EB)

Fluorescent diagnostics of epithelial neoplasms of different colon parts.

Science.gov (United States)

Korneva, Yulia S; Dorosevich, Alexander E; Maryakhina, Valeriya S

2017-10-01

Changes in the biochemical composition of the tissue during colon cancer progression usually precede morphological changes registered by light microscopy. These changes are very sensitive and may be used for diagnostics in difficult cases, when it is impossible to obtain sufficient amount of material during colonoscopy. The aim of the study is analysis of spectral characteristics of sporadic adenomas and tumors in different parts of colon for improving tumors diagnostics in disputable cases. The spectra of fluorescence excitation of histological sections from 78 patients with colon cancer (adenocarcinoma) and colonic adenomas of different localizations were measured. The spectra of fluorescence excitation of all types of adenomas as well as adenocarcinoma have two maxima at 260/270 nm and at 330/340 nm. The first maximum is primarily defined by tryptophan and phenylalanin containing peptides, one of them is glucagon. The second maximum is mainly defined by collagen in stroma. Progression of precancer lesions to advanced cancer leads to increase of NADH concentration impacting on the second maximum of spectra. However, spectra of all types of the investigated lesions have peculiarities depending on localization. At odds to the previous data about similarities between distal colon and rectum, our results demonstrate similar spectra for proximal colon and rectum due to some similarities in morphological and, as a consequence, biochemical composition. Tumor can be detected by spectral techniques on histological slides even if the specimen contains very few tumorous cells in stroma. Biochemical changes and their similarities for precancer lesions and advanced colon cancer have described. Peculiarities of spectral data for different parts of colon may change the previous opinion about similar mechanisms of cancerogenesis for distal colon and rectum. Moreover, investigation of tissue specimen obtained for histological examination and containing lack of malignant

Elemental and mineralogical changes in soils due to bioturbation along an earthworm invasion chronosequence in Northern Minnesota

Energy Technology Data Exchange (ETDEWEB)

Resner, Kathryn [Dept. of Soil, Water, and Climate, University of Minnesota, 439 Borlaug Hall, 1991 Upper Buford Circle, St. Paul, MN, 55108-6028 (United States); Yoo, Kyungsoo, E-mail: kyoo@umn.edu [Dept. of Soil, Water, and Climate, University of Minnesota, 439 Borlaug Hall, 1991 Upper Buford Circle, St. Paul, MN, 55108-6028 (United States); Hale, Cindy [University of Minnesota Duluth, The Natural Resources Research Institute, 5013 Miller Trunk Hwy. Duluth, MN 55811 (United States); Aufdenkampe, Anthony [Assistant Research Scientist - Isotope and Organic Geochemistry, Stroud Water Research Center, 970 Spencer Road, Avondale, PA 19311 (United States); Blum, Alex [US Geological Survey, 3215 Marine St., Boulder, CO 80303 (United States); Sebestyen, Stephen [Research Hydrologist, USDA Forest Service, Northern Research Station, Grand Rapids, MN 55744-3399 (United States)

2011-06-15

Minnesota forested soils have evolved without the presence of earthworms since the last glacial retreat. When exotic earthworms arrive, enhanced soil bioturbation often results in dramatic morphological and chemical changes in soils with negative implications for the forests' sustainability. However, the impacts of earthworm invasion on geochemical processes in soils are not well understood. This study attempts to quantify the role of earthworm invasion in mineral chemical weathering and nutrient dynamics along an earthworm invasion chronosequence in a sugar maple forest in Northern Minnesota. Depth and rates of soil mixing can be tracked with atmospherically derived short lived radioisotopes {sup 210}Pb and {sup 137}Cs. Their radioactivities increase in the lower A horizon at the expense of the peak activities near the soil surface, which indicate that soil mixing rate and its depth reach have been enhanced by earthworms. Enhanced soil mixing by earthworms is consistent with the ways that the vertical profiles of elemental and mineralogical compositions were affected by earthworm invasion. Biologically cycled Ca and P have peak concentrations near the soil surface prior to earthworm invasion. However, these peak abundances significantly declined in the earthworm invaded soils presumably due to enhanced soil mixing. It is clear that enhanced soil mixing due to earthworms also profoundly altered the vertical distribution of most mineral species within A horizons. Though the mechanisms are not clear yet, earthworm invasion appears to have contributed to net losses of clay mineral species and opal from the A horizons. As much as earthworms vertically relocated minerals and elements, they also intensify the contacts between organic matter and cations as shown in the increased amount of Ca and Fe in organically complexed and in exchangeable pools. With future studies on soil mixing rates and elemental leaching, this study will quantitatively and mechanically

Operation window and part-load performance study of a syngas fired gas turbine

International Nuclear Information System (INIS)

He, Fen; Li, Zheng; Liu, Pei; Ma, Linwei; Pistikopoulos, Efstratios N.

2012-01-01

Integrated coal gasification combined cycle (IGCC) provides a great opportunity for clean utilization of coal while maintaining the advantage of high energy efficiency brought by gas turbines. A challenging problem arising from the integration of an existing gas turbine to an IGCC system is the performance change of the gas turbine due to the shift of fuel from natural gas to synthesis gas, or syngas, mainly consisting of carbon monoxide and hydrogen. Besides the change of base-load performance, which has been extensively studied, the change of part-load performance is also of great significance for the operation of a gas turbine and an IGCC plant. In this paper, a detailed mathematical model of a syngas fired gas turbine is developed to study its part-load performance. A baseline is firstly established using the part-load performance of a natural gas fired gas turbine, then the part-load performance of the gas turbine running with different compositions of syngas is investigated and compared with the baseline. Particularly, the impacts of the variable inlet guide vane, the degree of fuel dilution, and the degree of air bleed are investigated. Results indicate that insufficient cooling of turbine blades and a reduced compressor surge margin are the major factors that constrain the part-load performance of a syngas fired gas turbine. Results also show that air bleed from the compressor can greatly improve the working condition of a syngas fired gas turbine, especially for those fired with low lower heating value syngas. The regulating strategy of a syngas fired gas turbine should also be adjusted in accordance to the changes of part-load performance, and a reduced scope of constant TAT (turbine exhaust temperature) control mode is required.

Cognitive flexibility: A distinct element of performance impairment due to sleep deprivation.

Science.gov (United States)

Honn, K A; Hinson, J M; Whitney, P; Van Dongen, H P A

2018-03-14

In around-the-clock operations, reduced alertness due to circadian misalignment and sleep loss causes performance impairment, which can lead to catastrophic errors and accidents. There is mounting evidence that performance on different tasks is differentially affected, but the general principles underlying this differentiation are not well understood. One factor that may be particularly relevant is the degree to which tasks require executive control, that is, control over the initiation, monitoring, and termination of actions in order to achieve goals. A key aspect of this is cognitive flexibility, i.e., the deployment of cognitive control resources to adapt to changes in events. Loss of cognitive flexibility due to sleep deprivation has been attributed to "feedback blunting," meaning that feedback on behavioral outcomes has reduced salience - and that feedback is therefore less effective at driving behavior modification under changing circumstances. The cognitive mechanisms underlying feedback blunting are as yet unknown. Here we present data from an experiment that investigated the effects of sleep deprivation on performance after an unexpected reversal of stimulus-response mappings, requiring cognitive flexibility to maintain good performance. Nineteen healthy young adults completed a 4-day in-laboratory study. Subjects were randomized to either a total sleep deprivation condition (n = 11) or a control condition (n = 8). Athree-phase reversal learning decision task was administered at baseline, and again after 30.5 h of sleep deprivation, or matching well-rested control. The task was based on a go/no go task paradigm, in which stimuli were assigned to either a go (response) set or a no go (no response) set. Each phase of the task included four stimuli (two in the go set and two in the no go set). After each stimulus presentation, subjects could make a response within 750 ms or withhold their response. They were then shown feedback on the accuracy of

Coupling of the orthorhombic distortion to the depression of the Tc's due to Zn2+ doping in the ''RE-123'' HTSC's: A (d + s)-wave picture

International Nuclear Information System (INIS)

Tang, I.M.; Thongruang, R.; Charoenthai, N.

1999-01-01

The depressions of the T c 's of the 123 REBa 2 Cu 3 O 7 HTSC's due to the substitution of Zn 2+ ions into the Cu(2) layer are studied. The orthorhombic distortion which occurs in the 123 ceramics is assumed to induce a modification to the spin-fluctuation (SF) mediated pairing interaction which in turn causes the order parameters of these HTSC's to be of mixed (d + s)-wave symmetry. It is shown that part of the rapid depression of the T c 's caused by Zn 2+ substitution into the CuO 2 is due to a reduction of the SF-mediated pairing interaction. The differences in the rates of suppression of T c due to Zn 2+ doping in the different RE-123 HTSC's are shown to be due to the changes in the orthorhombicity which depend on the size of the rare earth ions

Coupling of the Orthorhombic Distortion to the Depression of the Tc'S due to Zn2+ Doping in the "RE-123" Htsc's:. a (d+s)-WAVE Picture

Science.gov (United States)

Tang, I. M.; Charoenthai, N.; Thongruang, R.

The depressions of the Tc's of the "123" REBa2Cu3O7 HTSC's due to the substitution of Zn2+ ions into the Cu(2) layer are studied. The orthorhombic distortion which occurs in the "123" ceramics is assumed to induce a modification to the spin-fluctuation (SF) mediated pairing interaction which inturn causes the order parameters of these HTSC's to be of mixed (d+s)-wave symmetry. It is shown that part of the rapid depression of the Tc's caused by Zn2+ substitution into the CuO2 is due to a reduction of the SF-mediated pairing interaction. The differences in the rates of suppression of Tc due to Zn2+ doping in the different "RE-123" HTSC's are shown to be due to the changes in the orthorhombicity which depend on the size of the rare earth ions.

Single machine scheduling with slack due dates assignment

Science.gov (United States)

Liu, Weiguo; Hu, Xiangpei; Wang, Xuyin

2017-04-01

This paper considers a single machine scheduling problem in which each job is assigned an individual due date based on a common flow allowance (i.e. all jobs have slack due date). The goal is to find a sequence for jobs, together with a due date assignment, that minimizes a non-regular criterion comprising the total weighted absolute lateness value and common flow allowance cost, where the weight is a position-dependent weight. In order to solve this problem, an ? time algorithm is proposed. Some extensions of the problem are also shown.

Embedded systems analysis and modeling with SysML, UML and AADL

CERN Document Server

Kordon, Fabrice; Canals , Agusti; Dohet , Alain

2013-01-01

Since the construction of the first embedded system in the 1960s, embedded systems have continued to spread. They provide a continually increasing number of services and are part of our daily life. The development of these systems is a difficult problem which does not yet have a global solution. Another difficulty is that systems are plunged into the real world, which is not discrete (as is generally understood in computing), but has a richness of behaviors which sometimes hinders the formulation of simplifying assumptions due to their generally autonomous nature and they must face possibly

Comparative proteomics of Rhizopus delemar ATCC 20344 unravels the role of amino acid catabolism in fumarate accumulation

Directory of Open Access Journals (Sweden)

Dorett I. Odoni

2017-03-01

Full Text Available The filamentous fungus Rhizopus delemar naturally accumulates relatively high amounts of fumarate. Although the culture conditions that increase fumarate yields are well established, the network underlying the accumulation of fumarate is not yet fully understood. We set out to increase the knowledge about fumarate accumulation in R. delemar. To this end, we combined a transcriptomics and proteomics approach to identify key metabolic pathways involved in fumarate production in R. delemar, and propose that a substantial part of the fumarate accumulated in R. delemar during nitrogen starvation results from the urea cycle due to amino acid catabolism.

Traffic seismicity loaded historical building frequency parameters identification due to most commonly used truck in Slovakia

Directory of Open Access Journals (Sweden)

Papán Daniel

2016-01-01

Full Text Available Experimental investigation and combination with numerical modelling is one of the progressive method in many scientific areas. The structural dynamics including traffic seismicity effects are also becoming an increasing topic. The aim of this paper was to realize the numerical analysis of heritage Upper Gate in Modra - Slovakia and FEM simulation of the lorry T-815 natural vibration. These subsystems are dominant processes in traffic seismicity vibration effects in buildings. For this purpose the variants of FE model by computing program Scia engineering has been created for building and software ADINA for lorry. These models are important for the assessment of the dynamic vibration transmissibility due to mechanical impact load properties. The results of this simulation was evaluated in frequency area. Next part of the investigation was the realisation of the experimental measurement. The results obtained from the experiment were compared with FE analysis. Using of the theoretical analysis, experimental procedures results and FEM simulation of the natural vibration it seem to be the practical application for engineering practice in prediction and assessment buildings vibration due to seismicity induced by traffic.