WorldWideScience

Sample records for understanding system capable

  1. Advancing Capabilities for Understanding the Earth System Through Intelligent Systems, the NSF Perspective

    Science.gov (United States)

    Gil, Y.; Zanzerkia, E. E.; Munoz-Avila, H.

    2015-12-01

    The National Science Foundation (NSF) Directorate for Geosciences (GEO) and Directorate for Computer and Information Science (CISE) acknowledge the significant scientific challenges required to understand the fundamental processes of the Earth system, within the atmospheric and geospace, Earth, ocean and polar sciences, and across those boundaries. A broad view of the opportunities and directions for GEO are described in the report "Dynamic Earth: GEO imperative and Frontiers 2015-2020." Many of the aspects of geosciences research, highlighted both in this document and other community grand challenges, pose novel problems for researchers in intelligent systems. Geosciences research will require solutions for data-intensive science, advanced computational capabilities, and transformative concepts for visualizing, using, analyzing and understanding geo phenomena and data. Opportunities for the scientific community to engage in addressing these challenges are available and being developed through NSF's portfolio of investments and activities. The NSF-wide initiative, Cyberinfrastructure Framework for 21st Century Science and Engineering (CIF21), looks to accelerate research and education through new capabilities in data, computation, software and other aspects of cyberinfrastructure. EarthCube, a joint program between GEO and the Advanced Cyberinfrastructure Division, aims to create a well-connected and facile environment to share data and knowledge in an open, transparent, and inclusive manner, thus accelerating our ability to understand and predict the Earth system. EarthCube's mission opens an opportunity for collaborative research on novel information systems enhancing and supporting geosciences research efforts. NSF encourages true, collaborative partnerships between scientists in computer sciences and the geosciences to meet these challenges.

  2. Understanding Carbon Sequestration Options in the United States: Capabilities of a Carbon Management Geographic Information System

    Energy Technology Data Exchange (ETDEWEB)

    Dahowski, Robert T.; Dooley, James J.; Brown, Daryl R.; Mizoguchi, Akiyoshi; Shiozaki, Mai

    2001-04-03

    While one can discuss various sequestration options at a national or global level, the actual carbon management approach is highly site specific. In response to the need for a better understanding of carbon management options, Battelle in collaboration with Mitsubishi Corporation, has developed a state-of-the-art Geographic Information System (GIS) focused on carbon capture and sequestration opportunities in the United States. The GIS system contains information (e.g., fuel type, location, vintage, ownership, rated capacity) on all fossil-fired generation capacity in the Untied States with a rated capacity of at least 100 MW. There are also data on other CO2 sources (i.e., natural domes, gas processing plants, etc.) and associated pipelines currently serving enhanced oil recovery (EOR) projects. Data on current and prospective CO2 EOR projects include location, operator, reservoir and oil characteristics, production, and CO2 source. The system also contains information on priority deep saline aquifers and coal bed methane basins with potential for sequestering CO2. The GIS application not only enables data storage, flexible map making, and visualization capabilities, but also facilitates the spatial analyses required to solve complex linking of CO2 sources with appropriate and cost-effective sinks. A variety of screening criteria (spatial, geophysical, and economic) can be employed to identify sources and sinks most likely amenable to deployment of carbon capture and sequestration systems. The system is easily updateable, allowing it to stay on the leading edge of capture and sequestration technology as well as the ever-changing business landscape. Our paper and presentation will describe the development of this GIS and demonstrate its uses for carbon management analysis.

  3. Mobile systems capability plan

    International Nuclear Information System (INIS)

    1996-09-01

    This plan was prepared to initiate contracting for and deployment of these mobile system services. 102,000 cubic meters of retrievable, contact-handled TRU waste are stored at many sites around the country. Also, an estimated 38,000 cubic meters of TRU waste will be generated in the course of waste inventory workoff and continuing DOE operations. All the defense TRU waste is destined for disposal in WIPP near Carlsbad NM. To ship TRU waste there, sites must first certify that the waste meets WIPP waste acceptance criteria. The waste must be characterized, and if not acceptable, subjected to additional processing, including repackaging. Most sites plan to use existing fixed facilities or open new ones between FY1997-2006 to perform these functions; small-quantity sites lack this capability. An alternative to fixed facilities is the use of mobile systems mounted in trailers or skids, and transported to sites. Mobile systems will be used for all characterization and certification at small sites; large sites can also use them. The Carlsbad Area Office plans to pursue a strategy of privatization of mobile system services, since this offers a number of advantages. To indicate the possible magnitude of the costs of deploying mobile systems, preliminary estimates of equipment, maintenance, and operating costs over a 10-year period were prepared and options for purchase, lease, and privatization through fixed-price contracts considered

  4. New tendencies in wildland fire simulation for understanding fire phenomena: An overview of the WFDS system capabilities in Mediterranean ecosystems

    Science.gov (United States)

    Pastor, E.; Tarragó, D.; Planas, E.

    2012-04-01

    Wildfire theoretical modeling endeavors predicting fire behavior characteristics, such as the rate of spread, the flames geometry and the energy released by the fire front by applying the physics and the chemistry laws that govern fire phenomena. Its ultimate aim is to help fire managers to improve fire prevention and suppression and hence reducing damage to population and protecting ecosystems. WFDS is a 3D computational fluid dynamics (CFD) model of a fire-driven flow. It is particularly appropriate for predicting the fire behaviour burning through the wildland-urban interface, since it is able to predict the fire behaviour in the intermix of vegetative and structural fuels that comprise the wildland urban interface. This model is not suitable for operational fire management yet due to computational costs constrains, but given the fact that it is open-source and that it has a detailed description of the fuels and of the combustion and heat transfer mechanisms it is currently a suitable system for research purposes. In this paper we present the most important characteristics of the WFDS simulation tool in terms of the models implemented, the input information required and the outputs that the simulator gives useful for understanding fire phenomena. We briefly discuss its advantages and opportunities through some simulation exercises of Mediterranean ecosystems.

  5. Capability-based computer systems

    CERN Document Server

    Levy, Henry M

    2014-01-01

    Capability-Based Computer Systems focuses on computer programs and their capabilities. The text first elaborates capability- and object-based system concepts, including capability-based systems, object-based approach, and summary. The book then describes early descriptor architectures and explains the Burroughs B5000, Rice University Computer, and Basic Language Machine. The text also focuses on early capability architectures. Dennis and Van Horn's Supervisor; CAL-TSS System; MIT PDP-1 Timesharing System; and Chicago Magic Number Machine are discussed. The book then describes Plessey System 25

  6. Understanding dynamic capabilities through knowledge management

    DEFF Research Database (Denmark)

    Nielsen, Anders Paarup

    2006-01-01

    In the paper eight knowledge management activities are identified; knowledge creation, acquisition, capture, assembly, sharing, integration, leverage and exploitation. These activities are assembled into the three dynamic capabilities of knowledge development, knowledge (re)combination and knowle......In the paper eight knowledge management activities are identified; knowledge creation, acquisition, capture, assembly, sharing, integration, leverage and exploitation. These activities are assembled into the three dynamic capabilities of knowledge development, knowledge (re......)combination and knowledge use. The dynamic capabilities and the associated knowledge management activities create flows to and from the firm’s stock of knowledge and they support the creation and use of organizational capabilities....

  7. System Code Models and Capabilities

    International Nuclear Information System (INIS)

    Bestion, D.

    2008-01-01

    System thermalhydraulic codes such as RELAP, TRACE, CATHARE or ATHLET are now commonly used for reactor transient simulations. The whole methodology of code development is described including the derivation of the system of equations, the analysis of experimental data to obtain closure relation and the validation process. The characteristics of the models are briefly presented starting with the basic assumptions, the system of equations and the derivation of closure relationships. An extensive work was devoted during the last three decades to the improvement and validation of these models, which resulted in some homogenisation of the different codes although separately developed. The so called two-fluid model is the common basis of these codes and it is shown how it can describe both thermal and mechanical nonequilibrium. A review of some important physical models allows to illustrate the main capabilities and limitations of system codes. Attention is drawn on the role of flow regime maps, on the various methods for developing closure laws, on the role of interfacial area and turbulence on interfacial and wall transfers. More details are given for interfacial friction laws and their relation with drift flux models. Prediction of chocked flow and CFFL is also addressed. Based on some limitations of the present generation of codes, perspectives for future are drawn.

  8. Understanding the Relationship Between Organizational Networking and Network Capability

    Directory of Open Access Journals (Sweden)

    Hutu Raul Alexandru

    2015-07-01

    Full Text Available Organizational networking refers to firms‘ behaviours as activities, routines, practices which enable an organization to make sense of and capitalize on their networks of direct and indirect business relationships. The relationships are more important today when the business environment is more competitive. The firms can develop their organizational networking strategies by developing their network capability which refers to its ability to build, handle and exploit relationships. These capabilities are included in a complex configuration with other capabilities and competencies. The aim of this paper is to explore how network capabilities are structured and we tried to understand how they could be improved in order to obtain higher performance. Achieving a good network position that allows firms to make use of business opportunities is a main strategic aim of firms

  9. Using Porterian Activity Analysis to Understand Organizational Capabilities

    DEFF Research Database (Denmark)

    Sheehan, Norman T.; Foss, Nicolai Juul

    2017-01-01

    conceptualized by Porter’s writings on the activity-based view. Porterian activity analysis is becoming more accepted in the strategy literature, but no strategy scholar has explicitly used Porter’s activities, and particularly his concept of drivers, to understand and analyze organizational capabilities...

  10. DDP-516 Computer Graphics System Capabilities

    Science.gov (United States)

    1972-06-01

    This report describes the capabilities of the DDP-516 Computer Graphics System. One objective of this report is to acquaint DOT management and project planners with the system's current capabilities, applications hardware and software. The Appendix i...

  11. Sandia Laboratories technical capabilities: systems analysis

    International Nuclear Information System (INIS)

    Lundergan, C.D.

    1975-06-01

    The systems analysis capabilities at Sandia Laboratories are summarized. Selected applications of these capabilities are presented to illustrate the extent to which they can be applied in research and development programs. (U.S.)

  12. Hyperspectral Systems Increase Imaging Capabilities

    Science.gov (United States)

    2010-01-01

    In 1983, NASA started developing hyperspectral systems to image in the ultraviolet and infrared wavelengths. In 2001, the first on-orbit hyperspectral imager, Hyperion, was launched aboard the Earth Observing-1 spacecraft. Based on the hyperspectral imaging sensors used in Earth observation satellites, Stennis Space Center engineers and Institute for Technology Development researchers collaborated on a new design that was smaller and used an improved scanner. Featured in Spinoff 2007, the technology is now exclusively licensed by Themis Vision Systems LLC, of Richmond, Virginia, and is widely used in medical and life sciences, defense and security, forensics, and microscopy.

  13. Collaborative Research: Towards Advanced Understanding and Predictive Capability of Climate Change in the Arctic using a High-Resolution Regional Arctic Climate System Model

    Energy Technology Data Exchange (ETDEWEB)

    Lettenmaier, Dennis P

    2013-04-08

    Primary activities are reported in these areas: climate system component studies via one-way coupling experiments; development of the Regional Arctic Climate System Model (RACM); and physical feedback studies focusing on changes in Arctic sea ice using the fully coupled model.

  14. Understanding the origin of radon indoors: Building a predictive capability

    International Nuclear Information System (INIS)

    Sextro, R.G.

    1985-12-01

    Indoor radon concentrations one to two orders of magnitude higher than the US average of ∼60 Bq m -3 (∼1.5 pCi L -1 ) are not uncommon, and concentrations greater than 4000 Bq m -3 have been observed in houses in areas with no known artificially-enhanced radon sources. In general, source categories for indoor radon are well known: soil, domestic water, building materials, outdoor air, and natural gas. Soil is thought to be a major source of indoor radon, either through molecular diffusion (usually a minor component) or convective flow of soil gas. While soil gas flow into residences has been demonstrated, no detailed understanding of the important factors affecting the source strength of radon from soil has yet emerged. Preliminary work in this area has identified a number of likely issues, including the concentration of radium in the soil, the emanating fraction, soil type, soil moisture content, and other factors that would influence soil permeability and soil gas transport. Because a significant number of dwellings are expected to have indoor radon concentrations above guideline levels, a predictive capability is needed that would help identify geographical areas having the potential for high indoor concentrations. This paper reviews the preliminary work that has been done to identify important soil and building characteristics that influence the migration of radon and outlines the areas of further research necessary for development of a predictive method. 32 refs., 4 figs

  15. Evolution of a Unique Systems Engineering Capability

    Energy Technology Data Exchange (ETDEWEB)

    Robert M. Caliva; James A. Murphy; Kyle B. Oswald

    2011-06-01

    The Idaho National Laboratory (INL) is a science-based, applied engineering laboratory dedicated to supporting U.S. Department of Energy missions in nuclear and energy research, science, and national security. The INL’s Systems Engineering organization supports all of the various programs under this wide array of missions. As with any multifaceted organization, strategic planning is essential to establishing a consistent culture and a value discipline throughout all levels of the enterprise. While an organization can pursue operational excellence, product leadership or customer intimacy, it is extremely difficult to excel or achieve best-in-class at all three. In fact, trying to do so has resulted in the demise of a number of organizations given the very intricate balancing act that is necessary. The INL’s Systems Engineering Department has chosen to focus on customer intimacy where the customer’s needs are first and foremost and a more total solution is the goal. Frequently a total solution requires the employment of specialized tools to manage system complexity. However, it is only after understanding customer needs that tool selection and use would be pursued. This results in using both commercial-off-the-shelf (COTS) tools and, in some cases, requires internal development of specialized tools. This paper describes how a unique systems engineering capability, through the development of customized tools, evolved as a result of this customer-focused culture. It also addresses the need for a common information model or analysis framework and presents an overview of the tools developed to manage and display relationships between entities, support trade studies through the application of utility theory, and facilitate the development of a technology roadmap to manage system risk and uncertainty.

  16. Aviation System Analysis Capability Executive Assistant Design

    Science.gov (United States)

    Roberts, Eileen; Villani, James A.; Osman, Mohammed; Godso, David; King, Brent; Ricciardi, Michael

    1998-01-01

    In this technical document, we describe the design developed for the Aviation System Analysis Capability (ASAC) Executive Assistant (EA) Proof of Concept (POC). We describe the genesis and role of the ASAC system, discuss the objectives of the ASAC system and provide an overview of components and models within the ASAC system, and describe the design process and the results of the ASAC EA POC system design. We also describe the evaluation process and results for applicable COTS software. The document has six chapters, a bibliography, three appendices and one attachment.

  17. Systems Engineering for Space Exploration Medical Capabilities

    Science.gov (United States)

    Mindock, Jennifer; Reilly, Jeffrey; Rubin, David; Urbina, Michelle; Hailey, Melinda; Hanson, Andrea; Burba, Tyler; McGuire, Kerry; Cerro, Jeffrey; Middour, Chris; hide

    2017-01-01

    Human exploration missions that reach destinations beyond low Earth orbit, such as Mars, will present significant new challenges to crew health management. For the medical system, lack of consumable resupply, evacuation opportunities, and real-time ground support are key drivers toward greater autonomy. Recognition of the limited mission and vehicle resources available to carry out exploration missions motivates the Exploration Medical Capability (ExMC) Element's approach to enabling the necessary autonomy. The Element's work must integrate with the overall exploration mission and vehicle design efforts to successfully provide exploration medical capabilities. ExMC is applying systems engineering principles and practices to accomplish its goals. This paper discusses the structured and integrative approach that is guiding the medical system technical development. Assumptions for the required levels of care on exploration missions, medical system goals, and a Concept of Operations are early products that capture and clarify stakeholder expectations. Model-Based Systems Engineering techniques are then applied to define medical system behavior and architecture. Interfaces to other flight and ground systems, and within the medical system are identified and defined. Initial requirements and traceability are established, which sets the stage for identification of future technology development needs. An early approach for verification and validation, taking advantage of terrestrial and near-Earth exploration system analogs, is also defined to further guide system planning and development.

  18. Understanding land administration systems

    DEFF Research Database (Denmark)

    P. Williamson, Ian; Enemark, Stig; Wallace, Judy

    2008-01-01

    This paper introduces basic land administration theory and highlights four key concepts that are fundamental to understanding modern land administration systems. Readers may recall the first part of the paper in October issue of Coordinates. Here is the concluding part that focuses on the changing...

  19. Human Exploration Systems and Mobility Capability Roadmap Progress Review

    Science.gov (United States)

    Culbert, Chris; Taylor, Jeff

    2005-01-01

    Contents include the following: Capability Roadmap Team. Capability Description and Capability Breakdown Structure. Benefits of the Human Systems and Mobility Capability. Roadmap Process and Approach. Drivers and Assumptions for the whole team. Current State-of-the-Art, Assumptions and Requirements will be covered in the appropriate sections. Capability Presentations by Leads under Roadmap (Repeated for each capability under roadmap). Capability Description, Benefits, Current State-of-the-Art. Capability Requirements and Assumptions. Roadmap for Capability. Capability Readiness Level. Technology Readiness Level. Figures of Merit. Summary of Top Level Capability. Significant Technical Challenges. Summary and Forward Work.

  20. Understanding land administration systems

    DEFF Research Database (Denmark)

    P. Williamson, Ian; Enemark, Stig; Wallace, Judy

    2008-01-01

    This paper introduces basic land administration theory and highlights four key concepts that are fundamental to understanding modern land administration systems - firstly the land management paradigm and its influence on the land administration framework, secondly the role that the cadastre plays...... in contributing to sustainable development, thirdly the changing nature of ownership and the role of land markets, and lastly a land management vision that promotes land administration in support of sustainable development and spatial enablement of society. We present here the first part of the paper. The second...... part focuses on the changing  role of ownership and the role of land markets, and a land management vision will be published in November issue of Coordinates. Udgivelsesdato: Oktober...

  1. Shape understanding system machine understanding and human understanding

    CERN Document Server

    Les, Zbigniew

    2015-01-01

    This is the third book presenting selected results of research on the further development of the shape understanding system (SUS) carried out by authors in the newly founded Queen Jadwiga Research Institute of Understanding. In this book the new term Machine Understanding is introduced referring to a new area of research aiming to investigate the possibility of building machines with the ability to understand. It is presented that SUS needs to some extent mimic human understanding and for this reason machines are evaluated according to the rules applied for the evaluation of human understanding. The book shows how to formulate problems and how it can be tested if the machine is able to solve these problems.    

  2. Overview of ASC Capability Computing System Governance Model

    Energy Technology Data Exchange (ETDEWEB)

    Doebling, Scott W. [Los Alamos National Laboratory

    2012-07-11

    This document contains a description of the Advanced Simulation and Computing Program's Capability Computing System Governance Model. Objectives of the Governance Model are to ensure that the capability system resources are allocated on a priority-driven basis according to the Program requirements; and to utilize ASC Capability Systems for the large capability jobs for which they were designed and procured.

  3. Understanding Innovation for Sustainable Business Management Capabilities and Competencies under Uncertainty

    Directory of Open Access Journals (Sweden)

    Kuo-Jui Wu

    2015-10-01

    Full Text Available In recent years, many firms have come to understand that innovation is an important issue in sustainable business management, as it helps improve firm capabilities and competencies. Because of the fiercely competitive environment in the hotel industry, innovation has become a critical factor in the process of hotel differentiation, leading to sustainable business success. However, the literature has not thoroughly examined the role of innovation or the hierarchical structure of the capabilities and competencies in sustainable business management. This study adopts interval-valued triangular fuzzy numbers and grey relational analysis to provide a competitive priority ranking for the aspects and criteria that assist firms in decision-making. The study results indicate that innovation in technology capabilities and networking and social capabilities—in addition to competencies in systemic thinking—are the most important aspects of sustainable business management. In particular, this study indicates that to succeed in building a sustainable business in the hotel industry, firms should upgrade and integrate their business technologies, collaborate with actors inside and outside the firm, build trust as well as a shared vision that includes common agreement, and develop competencies in inventive thinking to support innovation and foster changes in strategy, structure, administrative procedures, and systems when necessary.

  4. Geospatial Information System Capability Maturity Models

    Science.gov (United States)

    2017-06-01

    To explore how State departments of transportation (DOTs) evaluate geospatial tool applications and services within their own agencies, particularly their experiences using capability maturity models (CMMs) such as the Urban and Regional Information ...

  5. Understanding radar systems

    CERN Document Server

    Kingsley, Simon

    1999-01-01

    What is radar? What systems are currently in use? How do they work? This book provides engineers and scientists with answers to these critical questions, focusing on actual radar systems in use today. It is a perfect resource for those just entering the field, or as a quick refresher for experienced practitioners. The book leads readers through the specialized language and calculations that comprise the complex world of radar engineering as seen in dozens of state-of-the-art radar systems. An easy to read, wide ranging guide to the world of modern radar systems.

  6. NASA's Space Launch System: Building a New Capability for Discovery

    Science.gov (United States)

    Creech, Stephen D.; Robinson, Kimberly F.

    2015-01-01

    Designed to enable human space exploration missions, including eventually landings on Mars, NASA's Space Launch System (SLS) represents a unique launch capability with a wide range of utilization opportunities, from delivering habitation systems into the lunar vicinity to high-energy transits through the outer solar system. Substantial progress has been made toward the first launch of the initial configuration of SLS, which will be able to deliver more than 70 metric tons of payload into low Earth orbit (LEO). The vehicle will then be evolved into more powerful configurations, culminating with the capability to deliver more than 130 metric tons to LEO. The initial configuration will be able to deliver greater mass to orbit than any contemporary launch vehicle, and the evolved configuration will have greater performance than the Saturn V rocket that enabled human landings on the moon. SLS will also be able to carry larger payload fairings than any contemporary launch vehicle, and will offer opportunities for co-manifested and secondary payloads. Because of its substantial mass-lift capability, SLS will also offer unrivaled departure energy, enabling mission profiles currently not possible. The basic capabilities of SLS have been driven by studies on the requirements of human deep-space exploration missions, and continue to be validated by maturing analysis of Mars mission options. Early collaboration with science teams planning future decadal-class missions have contributed to a greater understanding of the vehicle's potential range of utilization. As this paper will explain, SLS is making measurable progress toward becoming a global infrastructure asset for robotic and human scouts of all nations by providing the robust space launch capability to deliver sustainable solutions for exploration.

  7. Understanding Innovation for Sustainable Business Management Capabilities and Competencies under Uncertainty

    OpenAIRE

    Wu, Kuo-Jui; Liao, Ching-Jong; Tseng, Ming-Lang; Chou, Pei-Jay

    2015-01-01

    In recent years, many firms have come to understand that innovation is an important issue in sustainable business management, as it helps improve firm capabilities and competencies. Because of the fiercely competitive environment in the hotel industry, innovation has become a critical factor in the process of hotel differentiation, leading to sustainable business success. However, the literature has not thoroughly examined the role of innovation or the hierarchical structure of the capabiliti...

  8. Capability for Integrated Systems Risk-Reduction Analysis

    Science.gov (United States)

    Mindock, J.; Lumpkins, S.; Shelhamer, M.

    2016-01-01

    NASA's Human Research Program (HRP) is working to increase the likelihoods of human health and performance success during long-duration missions, and subsequent crew long-term health. To achieve these goals, there is a need to develop an integrated understanding of how the complex human physiological-socio-technical mission system behaves in spaceflight. This understanding will allow HRP to provide cross-disciplinary spaceflight countermeasures while minimizing resources such as mass, power, and volume. This understanding will also allow development of tools to assess the state of and enhance the resilience of individual crewmembers, teams, and the integrated mission system. We will discuss a set of risk-reduction questions that has been identified to guide the systems approach necessary to meet these needs. In addition, a framework of factors influencing human health and performance in space, called the Contributing Factor Map (CFM), is being applied as the backbone for incorporating information addressing these questions from sources throughout HRP. Using the common language of the CFM, information from sources such as the Human System Risk Board summaries, Integrated Research Plan, and HRP-funded publications has been combined and visualized in ways that allow insight into cross-disciplinary interconnections in a systematic, standardized fashion. We will show examples of these visualizations. We will also discuss applications of the resulting analysis capability that can inform science portfolio decisions, such as areas in which cross-disciplinary solicitations or countermeasure development will potentially be fruitful.

  9. The Design of a Capability-Based Distributed Operating System

    NARCIS (Netherlands)

    Mullender, Sape J.; Tanenbaum, A.S.

    Fifth-generation computer systems will use large numbers of processors to achieve high performance. In this paper a capability-based operating system designed for this environment is discussed. Capability-based operating systems have traditionally required large, complex kernels to manage the use of

  10. Using Sparse Capabilities in a Distributed Operating System

    NARCIS (Netherlands)

    Tanenbaum, Andrew S.; Mullender, Sape J.; van Renesse, Robbert

    Most distributed operating systems constructed to date have lacked a unifying mechanism for naming and protection. In this paper we discuss a system, Amoeba, that uses capabilities for naming and protecting objects. In contrast to traditional, centralized operating systems, in which capabilities are

  11. Aviation System Analysis Capability Quick Response System Report

    Science.gov (United States)

    Roberts, Eileen; Villani, James A.; Ritter, Paul

    1998-01-01

    The purpose of this document is to present the additions and modifications made to the Aviation System Analysis Capability (ASAC) Quick Response System (QRS) in FY 1997 in support of the ASAC ORS development effort. This document contains an overview of the project background and scope and defines the QRS. The document also presents an overview of the Logistics Management Institute (LMI) facility that supports the QRS, and it includes a summary of the planned additions to the QRS in FY 1998. The document has five appendices.

  12. Building the System of Innovation Capability Indicators: Case of Latvia

    Directory of Open Access Journals (Sweden)

    Daina ŠĶILTERE

    2013-11-01

    Full Text Available “Innovation” nowadays still is defined and interpreted in different ways. Some say that if you cannot define something you cannot measure it, and if you cannot measure it, you cannot manage it. Measuring innovation requires certain standards, definitions and methodology. Interpreting the measures requires an understanding of the “system of innovation” as a whole. Innovation is an important component for economic growth and productivity. However, taking into account constantly changing nature of innovation over time, it is extremely difficult to measure innovation. As a result, various indicators that supplement each other have come into common usage; that means one is not a predictor of the other. This paper aims to discuss and classify innovation capability measures. It is concluded that there is no general best way of measuring the innovation capability. Innovation is a complex process. Individual indicators provide useful insights into the specific components; together, they provide an understanding of the innovation process by which knowledge assets are converted into commercial applications and the linkages between the innovation process actors. In fact, the most interesting results may be obtained using a variety of different approaches at the same time.

  13. The Development of Mature Capabilities for Understanding and Valuing Technology through School Project Work.

    Science.gov (United States)

    Schallies, Michael; Wellensiek, Anneliese; Lembens, Anja

    This paper describes a German project that developed students' capabilities for understanding and valuing biotechnology and genetic engineering, focusing on practical fieldwork with schools by an interdisciplinary team. The paper identifies the characteristics of individual and structural preconditions and their development during active project…

  14. Beyond Normal Competencies: Understanding Organisation Designs to Develop and Sustain IT-Related Capabilities

    Directory of Open Access Journals (Sweden)

    Acklesh Prasad

    2013-03-01

    Full Text Available It is apparent that IT resources are important for organisations. It is also clear that organisations unique competencies, their IT-related capabilities, leverage the IT resources uniquely to create and sustain competitive advantage. However, IT resources are dynamic, and evolve at an exponential rate. This means that organisations will need to sustain their competencies to leverage opportunities offered by new IT resources. Research on ways to sustain IT-related capabilities is limited and a deeper understanding of this situation is important. Amongst other factors, a possible reason for this lack of progress in this area could be due to the lack of validated measurement items of the theoretical constructs to conduct such studies. We suggest an environment in which organisations could build new and sustain their existing IT-related capabilities. We then report on the development of valid and reliable measures for this environment. The validated measures would be useful in extending our understanding on how firms could sustain their IT-related capabilities. This effort will provide a deeper understanding of how firms can secure sustainable IT-related business value from their acquired IT resources.

  15. NGNP Data Management and Analysis System Modeling Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Cynthia D. Gentillon

    2009-09-01

    Projects for the very-high-temperature reactor (VHTR) program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. In addition, thermal-hydraulic experiments are conducted to validate codes used to assess reactor safety. The VHTR Program has established the NGNP Data Management and Analysis System (NDMAS) to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the third NDMAS objective. It describes capabilities for displaying the data in meaningful ways and identifying relationships among the measured quantities that contribute to their understanding.

  16. Six sigma: process of understanding the control and capability of ranitidine hydrochloride tablet.

    Science.gov (United States)

    Chabukswar, Ar; Jagdale, Sc; Kuchekar, Bs; Joshi, Vd; Deshmukh, Gr; Kothawade, Hs; Kuckekar, Ab; Lokhande, Pd

    2011-01-01

    The process of understanding the control and capability (PUCC) is an iterative closed loop process for continuous improvement. It covers the DMAIC toolkit in its three phases. PUCC is an iterative approach that rotates between the three pillars of the process of understanding, process control, and process capability, with each iteration resulting in a more capable and robust process. It is rightly said that being at the top is a marathon and not a sprint. The objective of the six sigma study of Ranitidine hydrochloride tablets is to achieve perfection in tablet manufacturing by reviewing the present robust manufacturing process, to find out ways to improve and modify the process, which will yield tablets that are defect-free and will give more customer satisfaction. The application of six sigma led to an improved process capability, due to the improved sigma level of the process from 1.5 to 4, a higher yield, due to reduced variation and reduction of thick tablets, reduction in packing line stoppages, reduction in re-work by 50%, a more standardized process, with smooth flow and change in coating suspension reconstitution level (8%w/w), a huge cost reduction of approximately Rs.90 to 95 lakhs per annum, an improved overall efficiency by 30% approximately, and improved overall quality of the product.

  17. Dynamic Analytical Capability to Better Understand and Anticipate Extremist Shifts Within Populations under Authoritarian Regimes.

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, Michael Lewis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-11-01

    The purpose of this work is to create a generalizable data- and theory-supported capability to better understand and anticipate (with quantifiable uncertainty): 1) how the dynamics of allegiance formations between various groups and society are impacted by active conflict and by third-party interventions and 2) how/why extremist allegiances co-evolve over time due to changing geopolitical, sociocultural, and military conditions.

  18. Work system innovation: Designing improvement methods for generative capability

    DEFF Research Database (Denmark)

    Hansen, David; Møller, Niels

    2013-01-01

    This paper explores how a work system’s capability for improvement is influenced by its improvement methods. Based on explorative case study at a Lean manufacturing facility, the methods problem solving and Appreciative Inquiry were compared through in-depth qualitative studies over a 12-month...... generative capability, which can be useful for practitioners who need to create systemic change....

  19. Enhancing the Capabilities of the Global Aerosol Monitoring Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Aerosol Measurement System (GAMS) project is developing a new, low cost satellite capability for measuring the properties and distributions of particles...

  20. OVERLOAD CAPABILITY OF POWER CABLES IN ACTUAL POWER CONSUMPTION SYSTEMS

    Directory of Open Access Journals (Sweden)

    L.A. Szhebenyuk

    2013-09-01

    Full Text Available Results of overload capability calculations for 6-kV power cables are analyzed. The work is aimed at creating a computation system for the current rating of high-voltage cross-linked polyethylene power cables.

  1. Business Systems Branch Abilities, Capabilities, and Services Web Page

    Science.gov (United States)

    Cortes-Pena, Aida Yoguely

    2009-01-01

    During the INSPIRE summer internship I acted as the Business Systems Branch Capability Owner for the Kennedy Web-based Initiative for Communicating Capabilities System (KWICC), with the responsibility of creating a portal that describes the services provided by this Branch. This project will help others achieve a clear view ofthe services that the Business System Branch provides to NASA and the Kennedy Space Center. After collecting the data through the interviews with subject matter experts and the literature in Business World and other web sites I identified discrepancies, made the necessary corrections to the sites and placed the information from the report into the KWICC web page.

  2. Positron imaging system with improved count rate and tomographic capability

    International Nuclear Information System (INIS)

    1979-01-01

    A system with improved count rate capability for detecting the radioactive distribution of positron events within an organ of interest in a living subject is described. Objects of the invention include improving the scintillation crystal and pulse processing electronics, avoiding the limitations of collimators and provide an Arger camera positron imaging system that avoids the use of collimators. (U.K.)

  3. Dependency visualization for complex system understanding

    Energy Technology Data Exchange (ETDEWEB)

    Smart, J. Allison Cory [Univ. of California, Davis, CA (United States)

    1994-09-01

    With the volume of software in production use dramatically increasing, the importance of software maintenance has become strikingly apparent. Techniques now sought and developed for reverse engineering and design extraction and recovery. At present, numerous commercial products and research tools exist which are capable of visualizing a variety of programming languages and software constructs. The list of new tools and services continues to grow rapidly. Although the scope of the existing commercial and academic product set is quite broad, these tools still share a common underlying problem. The ability of each tool to visually organize object representations is increasingly impaired as the number of components and component dependencies within systems increases. Regardless of how objects are defined, complex ``spaghetti`` networks result in nearly all large system cases. While this problem is immediately apparent in modem systems analysis involving large software implementations, it is not new. As will be discussed in Chapter 2, related problems involving the theory of graphs were identified long ago. This important theoretical foundation provides a useful vehicle for representing and analyzing complex system structures. While the utility of directed graph based concepts in software tool design has been demonstrated in literature, these tools still lack the capabilities necessary for large system comprehension. This foundation must therefore be expanded with new organizational and visualization constructs necessary to meet this challenge. This dissertation addresses this need by constructing a conceptual model and a set of methods for interactively exploring, organizing, and understanding the structure of complex software systems.

  4. The Requirements and Design of the Rapid Prototyping Capabilities System

    Science.gov (United States)

    Haupt, T. A.; Moorhead, R.; O'Hara, C.; Anantharaj, V.

    2006-12-01

    The Rapid Prototyping Capabilities (RPC) system will provide the capability to rapidly evaluate innovative methods of linking science observations. To this end, the RPC will provide the capability to integrate the software components and tools needed to evaluate the use of a wide variety of current and future NASA sensors, numerical models, and research results, model outputs, and knowledge, collectively referred to as "resources". It is assumed that the resources are geographically distributed, and thus RPC will provide the support for the location transparency of the resources. The RPC system requires providing support for: (1) discovery, semantic understanding, secure access and transport mechanisms for data products available from the known data provides; (2) data assimilation and geo- processing tools for all data transformations needed to match given data products to the model input requirements; (3) model management including catalogs of models and model metadata, and mechanisms for creation environments for model execution; and (4) tools for model output analysis and model benchmarking. The challenge involves developing a cyberinfrastructure for a coordinated aggregate of software, hardware and other technologies, necessary to facilitate RPC experiments, as well as human expertise to provide an integrated, "end-to-end" platform to support the RPC objectives. Such aggregation is to be achieved through a horizontal integration of loosely coupled services. The cyberinfrastructure comprises several software layers. At the bottom, the Grid fabric encompasses network protocols, optical networks, computational resources, storage devices, and sensors. At the top, applications use workload managers to coordinate their access to physical resources. Applications are not tightly bounded to a single physical resource. Instead, they bind dynamically to resources (i.e., they are provisioned) via a common grid infrastructure layer. For the RPC system, the

  5. Preliminary Assessment of Double Heterogeneity Capability of SCALE system

    International Nuclear Information System (INIS)

    Kim, Gwanyoung; Huh, Changwook

    2013-01-01

    The use of TRISO fuel particle results in the inherent double heterogeneity (DH) which makes it more difficult to model and requires methods different from those used for a typical LWR fuel. The SCALE (Standardized Computer Analysis for Licensing Evaluation) system has introduced a capability to model doubly heterogeneous systems and the DH cross section processing treatment in SCALE has been validated over and over. Those most validations are limited to a comparison with the repeated and latticed fuel particles. In this study, the fuel element with random-distributed fuel particles is modeled and analyzed in MCNP code. The DH capability of SCALE system is assess by comparing the SCALE results with those MCNP results. The SCALE system is investigated to utilize this code as VHTR analysis code. In this study, the DH capability of SCALE system is assessed by comparing the MCNP code with random-distributed model. As a result, a DH effect from SCALE system show a not a small difference with MCNP reference result. This study is insufficient to fully assess the DH capability of the SCALE system. More thorough assessments should be done utilize the SCALE code as VHTR analysis code and is in plan as a future study

  6. NASA's Space Launch System: A Cornerstone Capability for Exploration

    Science.gov (United States)

    Creech, Stephen D.

    2014-01-01

    Under construction today, the National Aeronautics and Space Administration's (NASA) Space Launch System (SLS), managed at the Marshall Space Flight Center, will provide a robust new capability for human and robotic exploration beyond Earth orbit. The vehicle's initial configuration, scheduled for first launch in 2017, will enable human missions into lunar space and beyond, as well as provide game-changing benefits for space science missions, including offering substantially reduced transit times for conventionally designed spacecraft. From there, the vehicle will undergo a series of block upgrades via an evolutionary development process designed to expedite mission capture as capability increases. The Space Launch System offers multiple benefits for a variety of utilization areas. From a mass-lift perspective, the initial configuration of the vehicle, capable of delivering 70 metric tons (t) to low Earth orbit (LEO), will be the world's most powerful launch vehicle. Optimized for missions beyond Earth orbit, it will also be the world's only exploration-class launch vehicle capable of delivering 25 t to lunar orbit. The evolved configuration, with a capability of 130 t to LEO, will be the most powerful launch vehicle ever flown. From a volume perspective, SLS will be compatible with the payload envelopes of contemporary launch vehicles, but will also offer options for larger fairings with unprecedented volume-lift capability. The vehicle's mass-lift capability also means that it offers extremely high characteristic energy for missions into deep space. This paper will discuss the impacts that these factors - mass-lift, volume, and characteristic energy - have on a variety of mission classes, particularly human exploration and space science. It will address the vehicle's capability to enable existing architectures for deep-space exploration, such as those documented in the Global Exploration Roadmap, a capabilities-driven outline for future deep-space voyages created

  7. NASA Space Launch System: A Cornerstone Capability for Exploration

    Science.gov (United States)

    Creech, Stephen D.; Robinson, Kimberly F.

    2014-01-01

    Under construction today, the National Aeronautics and Space Administration's (NASA) Space Launch System (SLS), managed at the Marshall Space Flight Center, will provide a robust new capability for human and robotic exploration beyond Earth orbit. The vehicle's initial configuration, sched will enable human missions into lunar space and beyond, as well as provide game-changing benefits for space science missions, including offering substantially reduced transit times for conventionally designed spacecraft. From there, the vehicle will undergo a series of block upgrades via an evolutionary development process designed to expedite mission capture as capability increases. The Space Launch System offers multiple benefits for a variety of utilization areas. From a mass-lift perspective, the initial configuration of the vehicle, capable of delivering 70 metric tons (t) to low Earth orbit (LEO), will be the world's most powerful launch vehicle. Optimized for missions beyond Earth orbit, it will also be the world's only exploration-class launch vehicle capable of delivering 25 t to lunar orbit. The evolved configuration, with a capability of 130 t to LEO, will be the most powerful launch vehicle ever flown. From a volume perspective, SLS will be compatible with the payload envelopes of contemporary launch vehicles, but will also offer options for larger fairings with unprecedented volume-lift capability. The vehicle's mass-lift capability also means that it offers extremely high characteristic energy for missions into deep space. This paper will discuss the impacts that these factors - mass-lift, volume, and characteristic energy - have on a variety of mission classes, particularly human exploration and space science. It will address the vehicle's capability to enable existing architectures for deep-space exploration, such as those documented in the Global Exploration Roadmap, a capabilities-driven outline for future deep-space voyages created by the International Space

  8. System for wireless data acquisition with web supervision capability

    OpenAIRE

    Šepetavc, Luka

    2009-01-01

    The thesis describes a design and realization of a system that is capable of acquiring data about environment, wirelessly transfering the data to another location, and presenting it on a screen and on a website. The description begins with a design and structure of electrical circuits. The reasons that lead to the choice of different elements and their role in the system are presented next. The system is divided into different electrical circuits or modules. They are transmitting, receiving, ...

  9. Monte Carlo capabilities of the SCALE code system

    International Nuclear Information System (INIS)

    Rearden, B.T.; Petrie, L.M.; Peplow, D.E.; Bekar, K.B.; Wiarda, D.; Celik, C.; Perfetti, C.M.; Ibrahim, A.M.; Hart, S.W.D.; Dunn, M.E.; Marshall, W.J.

    2015-01-01

    Highlights: • Foundational Monte Carlo capabilities of SCALE are described. • Improvements in continuous-energy treatments are detailed. • New methods for problem-dependent temperature corrections are described. • New methods for sensitivity analysis and depletion are described. • Nuclear data, users interfaces, and quality assurance activities are summarized. - Abstract: SCALE is a widely used suite of tools for nuclear systems modeling and simulation that provides comprehensive, verified and validated, user-friendly capabilities for criticality safety, reactor physics, radiation shielding, and sensitivity and uncertainty analysis. For more than 30 years, regulators, licensees, and research institutions around the world have used SCALE for nuclear safety analysis and design. SCALE provides a “plug-and-play” framework that includes three deterministic and three Monte Carlo radiation transport solvers that can be selected based on the desired solution, including hybrid deterministic/Monte Carlo simulations. SCALE includes the latest nuclear data libraries for continuous-energy and multigroup radiation transport as well as activation, depletion, and decay calculations. SCALE’s graphical user interfaces assist with accurate system modeling, visualization, and convenient access to desired results. SCALE 6.2 will provide several new capabilities and significant improvements in many existing features, especially with expanded continuous-energy Monte Carlo capabilities for criticality safety, shielding, depletion, and sensitivity and uncertainty analysis. An overview of the Monte Carlo capabilities of SCALE is provided here, with emphasis on new features for SCALE 6.2

  10. Increasing draft capability for retrofit flue gas desulfurization systems

    International Nuclear Information System (INIS)

    Petersen, R.D.; Basel, B.E.; Mosier, R.J.

    1992-01-01

    The retrofit installation of flue gas desulfurization (FGD) systems results in significantly higher draft losses for existing generating stations. Consequently, the means for increasing draft capability must be included in many FGD retrofit projects. Consideration is given to several alternatives for increasing draft capability. Alternatives are developed for new induced draft (ID) fans to replace the existing ID fans and for new booster fans to supplement the existing ID fans. Both centrifugal and axial fans are evaluated, as are different means of fan volume control. Each alternative is evaluated on the basis of technical merit and economics. Presented are the development of fan alternatives and results of the technical and economic evaluations

  11. Capabilities and diagnostics of the Sandia Pelletron-raster system

    International Nuclear Information System (INIS)

    Buckalew, W.H.; Lockwood, G.J.; Luker, S.M.; Ruggles, L.E.; Wyant, F.J.

    1984-07-01

    The radiation capabilities of the PELLETRON Electron Beam Accelerator have been expanded to include a controllable, variable dimension, beam diffusion option. This rastered beam option has been studied in detail. Beam characteristics have been determined as a function of incident electron beam energy, current, and deflection system parameters. The beam diagnostics required to define any given diffuse beam pattern are accurate and predictable. Recently, utility of this added PELLETRON capability was demonstrated by simulating the effects of complex nuclear reactor accident electron environments on electrical insulation materials similar to those used in nuclear power plants

  12. NASA's Space Launch System: An Enabling Capability for Discovery

    Science.gov (United States)

    Creech, Stephen D.

    2014-01-01

    The National Aeronautics and Space Administration's (NASA's) Space Launch System (SLS) Program, managed at the Marshall Space Flight Center, is making progress toward delivering a new capability for human spaceflight and scientific missions beyond Earth orbit. Developed with the goals of safety, affordability, and sustainability in mind, the SLS rocket will launch the Orion Multi-Purpose Crew Vehicle (MPCV), equipment, supplies, and major science missions for exploration and discovery. Making its first uncrewed test flight in 2017 and its first crewed flight in 2021, the SLS will evolve into the most powerful launch vehicle ever flown, capable of supporting human missions into deep space and to Mars. This paper will summarize the planned capabilities of the vehicle, the progress the SLS Program has made in the years since the Agency formally announced its architecture in September 2011, and the path the program is following to reach the launch pad in 2017 and then to evolve the 70 metric ton (t) initial lift capability to 130 t lift capability. The paper will outline the milestones the program has already reached, from developmental milestones such as the manufacture of the first flight hardware and recordbreaking engine testing, to life-cycle milestones such as the vehicle's Preliminary Design Review in the summer of 2013. The paper will also discuss the remaining challenges in both delivering the 70 t vehicle and in evolving its capabilities to the 130 t vehicle, and how the program plans to accomplish these goals. In addition, this paper will demonstrate how the Space Launch System is being designed to enable or enhance not only human exploration missions, but robotic scientific missions as well. Because of its unique launch capabilities, SLS will support simplifying spacecraft complexity, provide improved mass margins and radiation mitigation, and reduce mission durations. These capabilities offer attractive advantages for ambitious science missions by reducing

  13. Nuclear Hybrid Energy System Modeling: RELAP5 Dynamic Coupling Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Piyush Sabharwall; Nolan Anderson; Haihua Zhao; Shannon Bragg-Sitton; George Mesina

    2012-09-01

    The nuclear hybrid energy systems (NHES) research team is currently developing a dynamic simulation of an integrated hybrid energy system. A detailed simulation of proposed NHES architectures will allow initial computational demonstration of a tightly coupled NHES to identify key reactor subsystem requirements, identify candidate reactor technologies for a hybrid system, and identify key challenges to operation of the coupled system. This work will provide a baseline for later coupling of design-specific reactor models through industry collaboration. The modeling capability addressed in this report focuses on the reactor subsystem simulation.

  14. Monte Carlo capabilities of the SCALE code system

    International Nuclear Information System (INIS)

    Rearden, B.T.; Petrie, L.M.; Peplow, D.E.; Bekar, K.B.; Wiarda, D.; Celik, C.; Perfetti, C.M.; Ibrahim, A.M.; Dunn, M.E.; Hart, S.W.D.

    2013-01-01

    SCALE is a widely used suite of tools for nuclear systems modeling and simulation that provides comprehensive, verified and validated, user-friendly capabilities for criticality safety, reactor physics, radiation shielding, and sensitivity and uncertainty analysis. For more than 30 years, regulators, licensees, and research institutions around the world have used SCALE for nuclear safety analysis and design. SCALE provides a 'plug-and-play' framework that includes three deterministic and three Monte Carlo radiation transport solvers (KENO, MAVRIC, TSUNAMI) that can be selected based on the desired solution, including hybrid deterministic/Monte Carlo simulations. SCALE includes the latest nuclear data libraries for continuous-energy and multigroup radiation transport as well as activation, depletion, and decay calculations. SCALE's graphical user interfaces assist with accurate system modeling, visualization, and convenient access to desired results. SCALE 6.2, to be released in 2014, will provide several new capabilities and significant improvements in many existing features, especially with expanded continuous-energy Monte Carlo capabilities for criticality safety, shielding, depletion, and sensitivity and uncertainty analysis. An overview of the Monte Carlo capabilities of SCALE is provided here, with emphasis on new features for SCALE 6.2. (authors)

  15. A maintenance support system with document handling capability

    International Nuclear Information System (INIS)

    Fukumoto, A.; Tsumura, K.; Fujii, M.; Tai, I.; Makimo, M.; Watanabe, T.

    1990-01-01

    An operation and maintenance support system, called 'Advanced Man-Machine System for Nuclear Power Plants' (MMS-NPP) is under development with the support of the Japanese Government. Taking full advantage of Artificial Intelligence technology, the system aims to enhance the capability of already developed 'Computerized Operator Support System (COSS)' and gives wider and more advanced support for operation and maintenance. With a brief overview of MMS-NPP, this paper describes a support system for plant patrol and equipment inspection. The system gives guidance for plant patrol and for equipment inspection and provides easy access to plant drawings and documents. A unique knowledge acquisition method, utilizing image processing technology, was proposed in building the system

  16. "New Space Explosion" and Earth Observing System Capabilities

    Science.gov (United States)

    Stensaas, G. L.; Casey, K.; Snyder, G. I.; Christopherson, J.

    2017-12-01

    This presentation will describe recent developments in spaceborne remote sensing, including introduction to some of the increasing number of new firms entering the market, along with new systems and successes from established players, as well as industry consolidation reactions to these developments from communities of users. The information in this presentation will include inputs from the results of the Joint Agency Commercial Imagery Evaluation (JACIE) 2017 Civil Commercial Imagery Evaluation Workshop and the use of the US Geological Survey's Requirements Capabilities and Analysis for Earth Observation (RCA-EO) centralized Earth observing systems database and how system performance parameters are used with user science applications requirements.

  17. NASA's Space Launch System: An Enabling Capability for International Exploration

    Science.gov (United States)

    Creech, Stephen D.; May, Todd A.; Robinson, Kimberly F.

    2014-01-01

    As the program moves out of the formulation phase and into implementation, work is well underway on NASA's new Space Launch System, the world's most powerful launch vehicle, which will enable a new era of human exploration of deep space. As assembly and testing of the rocket is taking place at numerous sites around the United States, mission planners within NASA and at the agency's international partners continue to evaluate utilization opportunities for this ground-breaking capability. Developed with the goals of safety, affordability, and sustainability in mind, the SLS rocket will launch the Orion Multi-Purpose Crew Vehicle (MPCV), equipment, supplies, and major science missions for exploration and discovery. NASA is developing this new capability in an austere economic climate, a fact which has inspired the SLS team to find innovative solutions to the challenges of designing, developing, fielding, and operating the largest rocket in history, via a path that will deliver an initial 70 metric ton (t) capability in December 2017 and then continuing through an incremental evolutionary strategy to reach a full capability greater than 130 t. SLS will be enabling for the first missions of human exploration beyond low Earth in almost half a century, and from its first crewed flight will be able to carry humans farther into space than they have ever voyaged before. In planning for the future of exploration, the International Space Exploration Coordination Group, representing 12 of the world's space agencies, has created the Global Exploration Roadmap, which outlines paths toward a human landing on Mars, beginning with capability-demonstrating missions to the Moon or an asteroid. The Roadmap and corresponding NASA research outline the requirements for reference missions for these destinations. SLS will offer a robust way to transport international crews and the air, water, food, and equipment they would need for such missions.

  18. Exploiting the Capabilities of NASA's Giovanni System for Oceanographic Education

    Science.gov (United States)

    Acker, James G.; Petrucio, Emil; Leptoukh, Gregory; Shen, Suhung

    2007-01-01

    The NASA Goddard Earth Science Data and Information Services Center (GES DISC) Giovanni system [GES DISC Interactive Online Visualization ANd aNalysis Infrastructure] has significant capabilities for oceanographic education and independent research utilizing ocean color radiometry data products. Giovanni allows Web-based data discovery and basic analyses, and can be used both for guided illustration of a variety of marine processes and phenomena, and for independent research investigations. Giovanni's capabilities are particularly suited for advanced secondary school science and undergraduate (college) education. This presentation will describe a variety of ways that Giovanni can be used for oceanographic education. Auxiliary information resources that can be utilized will also be described. Several testimonies of Giovanni usage for instruction will be provided, and a recent case history of Giovanni utilization for instruction and research at the undergraduate level is highlighted.

  19. Actionable Capability for Social and Economic Systems (ACSES)

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, Steven J [ORNL; Brecke, Peter K [ORNL; Carmichael, Theodore D [ORNL; Eichelberger, Christopher N [ORNL; Ganguly, Auroop R [ORNL; Hadzikadic, Mirsad [ORNL; Jiao, Yu [ORNL; Khouja, Moutaz J [ORNL; McLean, Angus L [ORNL; Middleton, Erin J [ORNL; Omitaomu, Olufemi A [ORNL; Saric, Amar [University of North Carolina, Charlotte; Sun, Min [University of North Carolina, Charlotte; Whitmeyer, Joseph M [ORNL; Gilman, Paul [ORNL; O' Maonaigh, Heather C [ORNL

    2008-05-01

    The foundation of the Actionable Capability for Social and Economic Systems (ACSES) project is a useful regional-scale social-simulation system. This report is organized into five chapters that describe insights that were gained concerning the five key feasibility questions pertaining to such a system: (1) Should such a simulation system exist, would the current state of data sets or collectible data sets be adequate to support such a system? (2) By comparing different agent-based simulation systems, is it feasible to compare simulation systems and select one appropriate for a given application with agents behaving according to modern social theory rather than ad hoc rule sets? (3) Provided that a selected simulation system for a region of interest could be constructed, can the simulation system be updated with new and changing conditions so that the universe of potential outcomes are constrained by events on the ground as they evolve? (4) As these results are constrained by evolving events on the ground, is it feasible to still generate surprise and emerging behavior to suggest outcomes from novel courses of action? (5) As these systems may for the first time require large numbers (hundreds of millions) of agents operating with complexities demanded of modern social theories, can results still be generated within actionable decision cycles?

  20. Spent fuel reprocessing system security engineering capability maturity model

    International Nuclear Information System (INIS)

    Liu Yachun; Zou Shuliang; Yang Xiaohua; Ouyang Zigen; Dai Jianyong

    2011-01-01

    In the field of nuclear safety, traditional work places extra emphasis on risk assessment related to technical skills, production operations, accident consequences through deterministic or probabilistic analysis, and on the basis of which risk management and control are implemented. However, high quality of product does not necessarily mean good safety quality, which implies a predictable degree of uniformity and dependability suited to the specific security needs. In this paper, we make use of the system security engineering - capability maturity model (SSE-CMM) in the field of spent fuel reprocessing, establish a spent fuel reprocessing systems security engineering capability maturity model (SFR-SSE-CMM). The base practices in the model are collected from the materials of the practice of the nuclear safety engineering, which represent the best security implementation activities, reflect the regular and basic work of the implementation of the security engineering in the spent fuel reprocessing plant, the general practices reveal the management, measurement and institutional characteristics of all process activities. The basic principles that should be followed in the course of implementation of safety engineering activities are indicated from 'what' and 'how' aspects. The model provides a standardized framework and evaluation system for the safety engineering of the spent fuel reprocessing system. As a supplement to traditional methods, this new assessment technique with property of repeatability and predictability with respect to cost, procedure and quality control, can make or improve the activities of security engineering to become a serial of mature, measurable and standard activities. (author)

  1. Ocean Ensemble Forecasting in the Navy Earth System Prediction Capability

    Science.gov (United States)

    Rowley, C. D.; Hogan, P. J.; Frolov, S.; Wei, M.; Thoppil, P. G.; Smedstad, O. M.; Barton, N. P.; Bishop, C. H.

    2016-12-01

    An extended range ensemble forecast system is being developed in the US Navy Earth System Prediction Capability (ESPC). A global ocean ensemble generation capability to support the coupled ESPC ensemble forecast has been developed, and initial assessments are underway. The ocean ensemble generation is based on a perturbed-observation analysis developed for the Navy Coupled Ocean Data Assimilation system (NCODA). The resulting analysis perturbations are used to represent uncertainty in the initial conditions of a global ocean forecast ensemble using the Hybrid Coordinate Ocean Model (HYCOM). For cycling with HYCOM, the NCODA system performs a 3D variational analysis of temperature, salinity, geopotential, and vector velocity using remotely-sensed SST, SSH, and sea ice concentration, plus in situ observations of temperature, salinity, and currents from ships, buoys, XBTs, CTDs, profiling floats, and autonomous gliders. Sea surface height is assimilated through synthetic temperature and salinity profiles generated using the Modular Ocean Data Assimilation System (MODAS) historical regression database with surface height and surface temperature as inputs. Perturbations to the surface and profile observations use random samples from a normal distribution scaled by the observation error standard deviation, which combines estimates of instrument and representation error. Perturbations to the synthetic profiles are generated by supplying the perturbed surface inputs to the MODAS system, resulting in correlated profile changes with vertical correlations associated with historical uncertainty about thermocline depth and gradients. Initial results from a cycling global analysis show the analysis perturbations have scales and amplitudes consistent with short term forecast error covariances, and improve measures of ensemble forecast skill regionally and globally. Assessments of the global ocean ensemble forecast skill using the perturbed observation analysis will be presented

  2. Capability to model reactor regulating system in RFSP

    International Nuclear Information System (INIS)

    Chow, H.C.; Rouben, B.; Younis, M.H.; Jenkins, D.A.; Baudouin, A.; Thompson, P.D.

    1995-01-01

    The Reactor Regulating System package extracted from SMOKIN-G2 was linked within RFSP to the spatial kinetics calculation. The objective is to use this new capability in safety analysis to model the actions of RRS in hypothetical events such as in-core LOCA or moderator drain scenarios. This paper describes the RRS modelling in RFSP and its coupling to the neutronics calculations, verification of the RRS control routine functions, sample applications and comparisons to SMOKIN-G2 results for the same transient simulations. (author). 7 refs., 6 figs

  3. Evolutionary Capability Delivery of Coast Guard Manpower System

    Science.gov (United States)

    2014-06-01

    4029. html . Blanchard, Benjamin S., and Fabrycky, W. Wolter J. 2010. Systems Engineering and Analysis. Upper Saddle River, NJ: Prentice-Hall. Block...developers, designers, & SEO Specialists. 83 Accessed February 26, 2014. http://www.hurricanesoftwares.com/understanding- the-pros-and-cons-of-the

  4. Understanding the Value of a Computer Emergency Response Capability for Nuclear Security

    Energy Technology Data Exchange (ETDEWEB)

    Gasper, Peter Donald [Idaho National Laboratory; Rodriguez, Julio Gallardo [Idaho National Laboratory

    2015-06-01

    The international nuclear community has a great understanding of the physical security needs relating to the prevention, detection, and response of malicious acts associated with nuclear facilities and radioactive material. International Atomic Energy Agency (IAEA) Nuclear Security Recommendations (INFCIRC_225_Rev 5) outlines specific guidelines and recommendations for implementing and maintaining an organization’s nuclear security posture. An important element for inclusion into supporting revision 5 is the establishment of a “Cyber Emergency Response Team (CERT)” focused on the international communities cybersecurity needs to maintain a comprehensive nuclear security posture. Cybersecurity and the importance of nuclear cybersecurity require that there be a specific focus on developing an International Nuclear CERT (NS-CERT). States establishing contingency plans should have an understanding of the cyber threat landscape and the potential impacts to systems in place to protect and mitigate malicious activities. This paper will outline the necessary components, discuss the relationships needed within the international community, and outline a process by which the NS-CERT identifies, collects, processes, and reports critical information in order to establish situational awareness (SA) and support decision-making

  5. ARC System fuel cycle analysis capability, REBUS-2

    International Nuclear Information System (INIS)

    Hosteny, R.P.

    1978-10-01

    A detailed description is given of the ARC System fuel cycle modules FCI001, FCC001, FCC002, and FCC003 which form the fuel cycle analysis modules of the ARC System. These modules, in conjunction with certain other modules of the ARC System previously described in documents of this series, form the fuel cycle analysis system called REBUS-2. The physical model upon which the REBUS-2 fuel cycle modules are based and the calculational approach used in solving this model are discussed in detail. The REBUS-2 system either solves for the infinite time (i.e., equilibrium) operating conditions of a fuel recycle system under fixed fuel management conditions, or solves for the operating conditions during each of a series of explicitly specified (i.e., nonequilibrium) sequence of burn cycles. The code has the capability to adjust the fuel enrichment, the burn time, and the control poison requirements in order to satisfy user specified constraints on criticality, discharge fuel burnup, or to give the desired multiplication constant at some specified time during the reactor operation

  6. Localization Capability of Cooperative Anti-Intruder Radar Systems

    Directory of Open Access Journals (Sweden)

    Mauro Montanari

    2008-06-01

    Full Text Available System aspects of an anti-intruder multistatic radar based on impulse radio ultrawideband (UWB technology are addressed. The investigated system is composed of one transmitting node and at least three receiving nodes, positioned in the surveillance area with the aim of detecting and locating a human intruder (target that moves inside the area. Such systems, referred to also as UWB radar sensor networks, must satisfy severe power constraints worldwide imposed by, for example, the Federal Communications Commission (FCC and by the European Commission (EC power spectral density masks. A single transmitter-receiver pair (bistatic radar is considered at first. Given the available transmitted power and the capability of the receiving node to resolve the UWB pulses in the time domain, the surveillance area regions where the target is detectable, and those where it is not, are obtained. Moreover, the range estimation error for the transmitter-receiver pair is discussed. By employing this analysis, a multistatic system is then considered, composed of one transmitter and three or four cooperating receivers. For this multistatic system, the impact of the nodes location on area coverage, necessary transmitted power and localization uncertainty is studied, assuming a circular surveillance area. It is highlighted how area coverage and transmitted power, on one side, and localization uncertainty, on the other side, require opposite criteria of nodes placement. Consequently, the need for a system compromising between these factors is shown. Finally, a simple and effective criterion for placing the transmitter and the receivers is drawn.

  7. ADC's Insertion Devices and Magnetic Measurement Systems Capabilities

    Science.gov (United States)

    Deyhim, A.; Kulesza, J.

    2013-03-01

    In this paper Advance Design Consulting USA, Inc. (ADC) will discuss ADC's major improved capabilities for building Wiggler Insertion Devices, Undulator Planar Devices, Elliptical Polarizing Undulators (EPU), In-Vacuum Undulators (IVU), Cryogenically Cooled in-vacuum Undulators (CPMU), Super Conductive Undulator, and Insertion Device Magnetic Measurement Systems. ADC has designed, built and delivered Insertion Devices and Magnetic Measurement Systems to such facilities as MAX-lab (two EPUs, a Planar, and Measurement System), ALBA and ASP (Wigglers), BNL (CPMU), SSRF (two IVUs and a Measurement System), PAL (one IVU and Measurement System), NSRRC (one 4m EPU), and SRC (Planar and EPU). ADC's magnetic field measurement system is a sophisticated and sensitive machine for the measurement of magnetic fields in undulators (Planar and EPU), wigglers and in-vacuum ID units. The magnetic fields are measured using 3 axis hall-effect probes, mounted orthogonally, to a thin wand. The wand is mounted to a carriage that rides on vacuum air bearings. The base is granite. A flip coil is provided on two vertical towers with X, Y and Theta axes. Special software is provided to assist in homing, movement, and data collection and analysis.

  8. ARC System fuel cycle analysis capability, REBUS-2

    Energy Technology Data Exchange (ETDEWEB)

    Hosteny, R.P.

    1978-10-01

    A detailed description is given of the ARC System fuel cycle modules FCI001, FCC001, FCC002, and FCC003 which form the fuel cycle analysis modules of the ARC System. These modules, in conjunction with certain other modules of the ARC System previously described in documents of this series, form the fuel cycle analysis system called REBUS-2. The physical model upon which the REBUS-2 fuel cycle modules are based and the calculational approach used in solving this model are discussed in detail. The REBUS-2 system either solves for the infinite time (i.e., equilibrium) operating conditions of a fuel recycle system under fixed fuel management conditions, or solves for the operating conditions during each of a series of explicitly specified (i.e., nonequilibrium) sequence of burn cycles. The code has the capability to adjust the fuel enrichment, the burn time, and the control poison requirements in order to satisfy user specified constraints on criticality, discharge fuel burnup, or to give the desired multiplication constant at some specified time during the reactor operation.

  9. Integrated oceanographic image understanding system

    Science.gov (United States)

    Lybanon, Matthew; Peckinpaugh, Sarah H.; Holyer, Ronald J.; Cambridge, Vivian

    1991-04-01

    A system was assembled to study several aspects of locating ship targets from infrared imagery. The system was either placed on shore sites or installed on an aircraft to collect data on the scene. The primary sensor was an infrared camera which produced images of the scene at standard RS-l70 rates. Requirements that included real time operation dictated the use of a parallel architecture for this task. As no suitable commercial systems were avail able, a custom array of bit slice microprocessors was assembled for the task. Through extensive field tests strengths and limitations of the design have been identified. These lessons are being applied to the development of next generation systems. A gimbal mounted infrared camera with digitization circuitry presents a new 256 by 256 pixel image to the parallel pipelined array of 17 bit slice microprocessors thirty times a second. To extend processor performance beyond the standard commercial microprocessors. two basic bit slice designs were employed. The bit slice machines were highly tuned for the assigned tasks and algorithms. Unfortunately this restricted the desired flexibility to readily examine alternate algorithms. The fundamental architecture concept performed well quickly reducing the large array of data to manageable set of information. Real time operator displays were driven to monitor the progress of each test run. Results of the system operation were stored on video and digi tal recorders permitting more detailed analysis after each test. Non real time data reduction provided many insights into the system operation and to algorithm improvements. Substantial operator interaction. and data interpretation was required greatly slowing the post test analysis phase. Overwhelmed with data, the analysts focused on locating a few data segments of interest. Significant work remains in improving the interfaces between the field data and the powerful laboratory computers. Automation of the data analysis is also needed

  10. Y-12 defense programs. Nuclear Packaging Systems testing capabilities

    International Nuclear Information System (INIS)

    1995-06-01

    The Nuclear Packaging Systems (NPS) Department can manage/accomplish any packaging task. The NPS organization is responsible for managing the design, testing, certification, procurement, operation, refurbishment, maintenance, and disposal of packaging used to transport radioactive materials, other hazardous materials, and general cargoes on public roads and within the Oak Ridge Y-12 Plant. Additionally, the NPS Department has developed a Quality Assurance plan for all packaging, design and procurement of nonweapon shipping containers for radioactive materials, and design and procurement of performance-oriented packaging for hazardous materials. Further, the NPS Department is responsible for preparation and submittal of Safety Analysis Reports for Packaging (SARP). The NPS Department coordinates shipping container procurement and safety certification activities that have lead-times of up to two years. A Packaging Testing Capabilities Table at the Oak Ridge complex is included as a table

  11. A Historical Systems Study of Liquid Rocket Engine Throttling Capabilities

    Science.gov (United States)

    Betts, Erin M.; Frederick, Robert A., Jr.

    2010-01-01

    This is a comprehensive systems study to examine and evaluate throttling capabilities of liquid rocket engines. The focus of this study is on engine components, and how the interactions of these components are considered for throttling applications. First, an assessment of space mission requirements is performed to determine what applications require engine throttling. A background on liquid rocket engine throttling is provided, along with the basic equations that are used to predict performance. Three engines are discussed that have successfully demonstrated throttling. Next, the engine system is broken down into components to discuss special considerations that need to be made for engine throttling. This study focuses on liquid rocket engines that have demonstrated operational capability on American space launch vehicles, starting with the Apollo vehicle engines and ending with current technology demonstrations. Both deep throttling and shallow throttling engines are discussed. Boost and sustainer engines have demonstrated throttling from 17% to 100% thrust, while upper stage and lunar lander engines have demonstrated throttling in excess of 10% to 100% thrust. The key difficulty in throttling liquid rocket engines is maintaining an adequate pressure drop across the injector, which is necessary to provide propellant atomization and mixing. For the combustion chamber, cooling can be an issue at low thrust levels. For turbomachinery, the primary considerations are to avoid cavitation, stall, surge, and to consider bearing leakage flows, rotordynamics, and structural dynamics. For valves, it is necessary to design valves and actuators that can achieve accurate flow control at all thrust levels. It is also important to assess the amount of nozzle flow separation that can be tolerated at low thrust levels for ground testing.

  12. Synergies, strengths and challenges: findings on community capability from a systematic health systems research literature review

    OpenAIRE

    Asha S. George; Kerry Scott; Vrinda Mehra; Veena Sriram

    2016-01-01

    Abstract Background Community capability is the combined influence of a community’s social systems and collective resources that can address community problems and broaden community opportunities. We frame it as consisting of three domains that together support community empowerment: what communities have; how communities act; and for whom communities act. We sought to further understand these domains through a secondary analysis of a previous systematic review on community participation in h...

  13. Mars Surface System Common Capabilities and Challenges for Human Missions

    Science.gov (United States)

    Hoffman, Stephen J.; Toups, Larry

    2016-01-01

    NASA has begun a process to identify and evaluate candidate locations where humans could land, live and work on the martian surface. These locations are referred to as Exploration Zones (EZs). Given current mission concepts, an EZ is a collection of Regions of Interest (ROIs) that are located within approximately 100 kilometers of a centralized landing site. ROIs are areas that are relevant for scientific investigation and/or development/maturation of capabilities and resources necessary for a sustainable human presence. The EZ also contains a landing site and a habitation site that will be used by multiple human crews during missions to explore and utilize the ROIs within the EZ. In parallel with this process, NASA continues to make progress on the Evolvable Mars Campaign examining alternatives that can pioneer an extended human presence on Mars that is Earth independent. This involves ongoing assessments of surface systems and operations to enable a permanent, sustainable human presence. Because of the difficulty in getting equipment and supplies to the surface of Mars, part of these assessments involve identifying those systems and processes that can perform in multiple, sometimes completely unrelated, situations. These assessments have been performed in a very generic surface mission carried out at a very generic surface location. As specific candidate EZs are identified it becomes important to evaluate the current suite of surface systems and operations as they are likely to perform for the specific locations and for the types of operations - both scientific and development - that are proposed for these EZs. It is also important to evaluate the proposed EZs for their suitability to be explored or developed given the range of capabilities and constraints for the types of surface systems and operations being considered within the EMC. This means looking at setting up and operating a field station at a central location within the EZ as well as traversing to and

  14. A Capability Approach to Understanding Sport for Social Inclusion: Agency, Structure and Organisations

    Directory of Open Access Journals (Sweden)

    Naofumi Suzuki

    2017-06-01

    Full Text Available Despite the global diffusion of the term social inclusion, as well as the use of sport to promote it, questions have been raised regarding the extent to which sport is able to contribute to transforming the exclusive nature of the social structure. The lack of analytical clarity of the concept has not helped to address these questions. This article proposes a conceptual framework based on Amartya Sen’s capability approach, considering social exclusion as the denial of social relations that leads to serious deprivation of important capabilities. A person’s capabilities could potentially be improved through micro-, meso-, and macro-level social processes. At the micro level, sport-based social inclusion programmes could offer such social relations to varying degrees, though sport’s values are only relative to other leisure activities. The scale of impact depends primarily on the meso-level processes, in which the size and quality of each programme can be improved through organisational learning, and secondarily on the macro-level processes whereby the organisational population is institutionalised. It is argued that more research needs to be done on the meso and macro levels, as they are concerned with the ultimate potential of sport to facilitate structural transformation towards more socially inclusive society.

  15. Applying systems engineering principles towards developing defence capabilities

    CSIR Research Space (South Africa)

    Smith, CJ

    2011-09-01

    Full Text Available missions defined in [2]. The South African Department of Defence (DOD) Information Strategy [3] has responded to the requirement of a single joint C4I3RS capability by adopting network enabling approaches to achieve optimal benefit of resources... is responsible to coordinate joint operations for the SANDF. This requires a certain level of Capability Based Planning to direct and guide planning at Services and Division levels in the SANDF. The SANDF Capability Portfolios are structured as indicated...

  16. How can the capability approach contribute to understanding provision for people with learning difficulties?

    OpenAIRE

    Florian, Lani; Devecchi, Cristina; Dee, Lesley

    2008-01-01

    The capability approach suggests that well-being is fundamentally about the freedom that people have to be and do the things they have reason to value. This paper asks what freedom those adults who experience difficulties in learning have to be and do the things they have reason to value? It draws upon our recently completed literature review on theories of learning for adults with difficulties in learning (Dee, Devecchi and Florian, 2006) where the concepts of ‘being’ and ‘doing’ were integr...

  17. The ESA River & Lake System: Current Capabilities and Future Potential

    DEFF Research Database (Denmark)

    Smith, Richard G.; Salloway, Mark; Berry, Philippa A. M.

    Measuring the earth's river and lake resources using satellite radar altimetry offers a unique global monitoring capability, which complements the detailed measurements made by the steadily decreasing number of in-situ gauges. To exploit this unique remote monitoring capability, a global pilot...

  18. System Reliability Analysis Capability and Surrogate Model Application in RAVEN

    Energy Technology Data Exchange (ETDEWEB)

    Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Alfonsi, Andrea [Idaho National Lab. (INL), Idaho Falls, ID (United States); Huang, Dongli [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gleicher, Frederick [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wang, Bei [Idaho National Lab. (INL), Idaho Falls, ID (United States); Adbel-Khalik, Hany S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Pascucci, Valerio [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-11-01

    This report collect the effort performed to improve the reliability analysis capabilities of the RAVEN code and explore new opportunity in the usage of surrogate model by extending the current RAVEN capabilities to multi physics surrogate models and construction of surrogate models for high dimensionality fields.

  19. Aviation System Analysis Capability Air Carrier Investment Model-Cargo

    Science.gov (United States)

    Johnson, Jesse; Santmire, Tara

    1999-01-01

    The purpose of the Aviation System Analysis Capability (ASAC) Air Cargo Investment Model-Cargo (ACIMC), is to examine the economic effects of technology investment on the air cargo market, particularly the market for new cargo aircraft. To do so, we have built an econometrically based model designed to operate like the ACIM. Two main drivers account for virtually all of the demand: the growth rate of the Gross Domestic Product (GDP) and changes in the fare yield (which is a proxy of the price charged or fare). These differences arise from a combination of the nature of air cargo demand and the peculiarities of the air cargo market. The net effect of these two factors are that sales of new cargo aircraft are much less sensitive to either increases in GDP or changes in the costs of labor, capital, fuel, materials, and energy associated with the production of new cargo aircraft than the sales of new passenger aircraft. This in conjunction with the relatively small size of the cargo aircraft market means technology improvements to the cargo aircraft will do relatively very little to spur increased sales of new cargo aircraft.

  20. Aviation System Analysis Capability Quick Response System Report Server User's Guide

    Science.gov (United States)

    Roberts, Eileen R.; Villani, James A.; Wingrove, Earl R., III

    1996-01-01

    This report is a user's guide for the Aviation System Analysis Capability Quick Response System (ASAC QRS) Report Server. The ASAC QRS is an automated online capability to access selected ASAC models and data repositories. It supports analysis by the aviation community. This system was designed by the Logistics Management Institute for the NASA Ames Research Center. The ASAC QRS Report Server allows users to obtain information stored in the ASAC Data Repositories.

  1. Hybrid Modeling Capability for Aircraft Electrical Propulsion Systems, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — PC Krause and Associates is partnering with Purdue University, EleQuant, and GridQuant to create a hybrid modeling capability. The combination of PCKA's extensive...

  2. Synergies, strengths and challenges: findings on community capability from a systematic health systems research literature review.

    Science.gov (United States)

    George, Asha S; Scott, Kerry; Mehra, Vrinda; Sriram, Veena

    2016-11-15

    Community capability is the combined influence of a community's social systems and collective resources that can address community problems and broaden community opportunities. We frame it as consisting of three domains that together support community empowerment: what communities have; how communities act; and for whom communities act. We sought to further understand these domains through a secondary analysis of a previous systematic review on community participation in health systems interventions in low and middle income countries (LMICs). We searched for journal articles published between 2000 and 2012 related to the concepts of "community", "capability/participation", "health systems research" and "LMIC." We identified 64 with rich accounts of community participation involving service delivery and governance in health systems research for thematic analysis following the three domains framing community capability. When considering what communities have, articles reported external linkages as the most frequently gained resource, especially when partnerships resulted in more community power over the intervention. In contrast, financial assets were the least mentioned, despite their importance for sustainability. With how communities act, articles discussed challenges of ensuring inclusive participation and detailed strategies to improve inclusiveness. Very little was reported about strengthening community cohesiveness and collective efficacy despite their importance in community initiatives. When reviewing for whom communities act, the importance of strong local leadership was mentioned frequently, while conflict resolution strategies and skills were rarely discussed. Synergies were found across these elements of community capability, with tangible success in one area leading to positive changes in another. Access to information and opportunities to develop skills were crucial to community participation, critical thinking, problem solving and ownership. Although

  3. Synergies, strengths and challenges: findings on community capability from a systematic health systems research literature review

    Directory of Open Access Journals (Sweden)

    Asha S. George

    2016-11-01

    Full Text Available Abstract Background Community capability is the combined influence of a community’s social systems and collective resources that can address community problems and broaden community opportunities. We frame it as consisting of three domains that together support community empowerment: what communities have; how communities act; and for whom communities act. We sought to further understand these domains through a secondary analysis of a previous systematic review on community participation in health systems interventions in low and middle income countries (LMICs. Methods We searched for journal articles published between 2000 and 2012 related to the concepts of “community”, “capability/participation”, “health systems research” and “LMIC.” We identified 64 with rich accounts of community participation involving service delivery and governance in health systems research for thematic analysis following the three domains framing community capability. Results When considering what communities have, articles reported external linkages as the most frequently gained resource, especially when partnerships resulted in more community power over the intervention. In contrast, financial assets were the least mentioned, despite their importance for sustainability. With how communities act, articles discussed challenges of ensuring inclusive participation and detailed strategies to improve inclusiveness. Very little was reported about strengthening community cohesiveness and collective efficacy despite their importance in community initiatives. When reviewing for whom communities act, the importance of strong local leadership was mentioned frequently, while conflict resolution strategies and skills were rarely discussed. Synergies were found across these elements of community capability, with tangible success in one area leading to positive changes in another. Access to information and opportunities to develop skills were crucial to community

  4. User Instructions for the Systems Assessment Capability, Rev. 1, Computer Codes Volume 3: Utility Codes

    Energy Technology Data Exchange (ETDEWEB)

    Eslinger, Paul W.; Aaberg, Rosanne L.; Lopresti, Charles A.; Miley, Terri B.; Nichols, William E.; Strenge, Dennis L.

    2004-09-14

    This document contains detailed user instructions for a suite of utility codes developed for Rev. 1 of the Systems Assessment Capability. The suite of computer codes for Rev. 1 of Systems Assessment Capability performs many functions.

  5. A General and Intuitive Approach to Understand and Compare the Torque Production Capability of AC Machines

    DEFF Research Database (Denmark)

    Wang, Dong; Lu, Kaiyuan; Rasmussen, Peter Omand

    2014-01-01

    -frame, through complicated mathematical manipulations. This is a more mathematical approach rather than explaining the physics behind torque production, which even brings a lot of difficulties to specialist. This paper introduces a general and intuitive approach to obtain the dq-frame torque equation of various...... AC machines. In this method, torque equation can be obtained based on the intuitive physical understanding of the mechanism behind torque production. It is then approved to be applicable for general case, including rotor saliency and various types of magnetomotive force sources. As an application...

  6. NGNP Data Management and Analysis System Analysis and Web Delivery Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Cynthia D. Gentillon

    2011-09-01

    Projects for the Very High Temperature Reactor (VHTR) Technology Development Office provide data in support of Nuclear Regulatory Commission licensing of the very high temperature reactor. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high-temperature and high-fluence environments. The NGNP Data Management and Analysis System (NDMAS) at the Idaho National Laboratory has been established to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the third NDMAS objective. It describes capabilities for displaying the data in meaningful ways and for data analysis to identify useful relationships among the measured quantities. The capabilities are described from the perspective of NDMAS users, starting with those who just view experimental data and analytical results on the INL NDMAS web portal. Web display and delivery capabilities are described in detail. Also the current web pages that show Advanced Gas Reactor, Advanced Graphite Capsule, and High Temperature Materials test results are itemized. Capabilities available to NDMAS developers are more extensive, and are described using a second series of examples. Much of the data analysis efforts focus on understanding how thermocouple measurements relate to simulated temperatures and other experimental parameters. Statistical control charts and correlation monitoring provide an ongoing assessment of instrument accuracy. Data analysis capabilities are virtually unlimited for those who use the NDMAS web data download capabilities and the analysis software of their choice. Overall, the NDMAS provides convenient data analysis and web delivery capabilities for studying a very large and rapidly increasing database of well-documented, pedigreed data.

  7. Understanding and Supporting Dynamic Capabilities of Design Teams in Production of Technology-Innovation

    DEFF Research Database (Denmark)

    Jensen, Ole Kjeldal

    current environment. This study explores the practices of engineering designers that are executing disruptive innovation projects for DONG Energy, a Danish energy utilities company. The aim of the study was to understand the role of the designer in disruptive innovation and to create a tool for supporting...... multidisciplinary design teams, while creating disruptive innovations. The results from this study are presented in five research Papers that address the following themes: 1) the willingness of engineers to follow formal procedures, 2) critical knowledge domains in front-end technology decisions, 3) knowledge...... associated with product development, such as market design; 3) the diversity of these domains was found to increase the barrier for effective transition from the front-end phase to the product development phase; 4) the transition gate was found to be a separate phase, with its own knowledge...

  8. The ESA River & Lake System: Current Capabilities and Future Potential

    DEFF Research Database (Denmark)

    Smith, Richard G.; Salloway, Mark; Berry, Philippa A. M.

    Measuring the earth's river and lake resources using satellite radar altimetry offers a unique global monitoring capability, which complements the detailed measurements made by the steadily decreasing number of in-situ gauges. To exploit this unique remote monitoring capability, a global pilot...... scheme was implemented in 2005 to derive river and lake surface height measurements from multi-mission satellite radar altimetry. Near-Real-Time (NRT) products from the Jason-2 satellite altimeter are automatically generated based on data acquired daily from CNES; allowing for estimates of river and lake...

  9. Understanding Patterns for System of Systems Integration

    DEFF Research Database (Denmark)

    Kazman, Rick; Schmid, Klaus; Nielsen, Claus Ballegård

    2013-01-01

    of systems integration patterns. These characteristics at the same time support the architecting process by highlighting important issues a SoS architect needs to consider. We discuss the consolidated template and illustrate it with an example pattern. We also discuss the integration of this novel pattern...

  10. Assessment of the integration capability of system architectures from a complex and distributed software systems perspective

    Science.gov (United States)

    Leuchter, S.; Reinert, F.; Müller, W.

    2014-06-01

    Procurement and design of system architectures capable of network centric operations demand for an assessment scheme in order to compare different alternative realizations. In this contribution an assessment method for system architectures targeted at the C4ISR domain is presented. The method addresses the integration capability of software systems from a complex and distributed software system perspective focusing communication, interfaces and software. The aim is to evaluate the capability to integrate a system or its functions within a system-of-systems network. This method uses approaches from software architecture quality assessment and applies them on the system architecture level. It features a specific goal tree of several dimensions that are relevant for enterprise integration. These dimensions have to be weighed against each other and totalized using methods from the normative decision theory in order to reflect the intention of the particular enterprise integration effort. The indicators and measurements for many of the considered quality features rely on a model based view on systems, networks, and the enterprise. That means it is applicable to System-of-System specifications based on enterprise architectural frameworks relying on defined meta-models or domain ontologies for defining views and viewpoints. In the defense context we use the NATO Architecture Framework (NAF) to ground respective system models. The proposed assessment method allows evaluating and comparing competing system designs regarding their future integration potential. It is a contribution to the system-of-systems engineering methodology.

  11. Understanding and controlling the enteric nervous system

    NARCIS (Netherlands)

    Boeckxstaens, G. E.

    2002-01-01

    The enteric nervous system or the `Little Brain' of the gut controls gastrointestinal motility and secretion, and is involved in visceral sensation. In this chapter, new developments in understanding the function of the enteric nervous system are described. In particular, the interaction of this

  12. Comparison of system capabilities of Teradata and Oracle

    OpenAIRE

    Mimra, Jonáš

    2011-01-01

    In my work, I deal with two database systems, Oracle and Teradata. I compare differences in data storage and database architecture. My work examines the performance of both systems installed on one operating system. The analysis was based on the speed of data import and response on SQL queries such as SELECT, SELECT with JOIN and UPDATE. Based on the results of my measurements recommend which of these two systems suits best OLAP and which OLTP database data storage technology.

  13. Workload balancing capability of pull systems in MTO production

    NARCIS (Netherlands)

    Germs, R.; Riezebos, J.

    2010-01-01

    Pull systems focusing on throughput time control and applicable in situations with high variety and customisation are scarce. This paper compares three unit-based pull systems that can cope with such situations: POLCA, CONWIP and m-CONWIP. These systems control the shop floor throughput time of

  14. Japanese Children's Understanding of Notational Systems

    Science.gov (United States)

    Takahashi, Noboru

    2012-01-01

    This study examined Japanese children's understanding of two Japanese notational systems: "hiragana" and "kanji". In three experiments, 126 3- to 6-year-olds were asked to name words written in hiragana or kanji as they appeared with different pictures. Consistent with Bialystok ("Journal of Experimental Child…

  15. Understanding Nuclear Safety Culture: A Systemic Approach

    International Nuclear Information System (INIS)

    Afghan, A.N.

    2016-01-01

    The Fukushima accident was a systemic failure (Report by Director General IAEA on the Fukushima Daiichi Accident). Systemic failure is a failure at system level unlike the currently understood notion which regards it as the failure of component and equipment. Systemic failures are due to the interdependence, complexity and unpredictability within systems and that is why these systems are called complex adaptive systems (CAS), in which “attractors” play an important role. If we want to understand the systemic failures we need to understand CAS and the role of these attractors. The intent of this paper is to identify some typical attractors (including stakeholders) and their role within complex adaptive system. Attractors can be stakeholders, individuals, processes, rules and regulations, SOPs etc., towards which other agents and individuals are attracted. This paper will try to identify attractors in nuclear safety culture and influence of their assumptions on safety culture behavior by taking examples from nuclear industry in Pakistan. For example, if the nuclear regulator is an attractor within nuclear safety culture CAS then how basic assumptions of nuclear plant operators and shift in-charges about “regulator” affect their own safety behavior?

  16. ROV: improving remotely operated vehicle (ROV) intervention capabilities for blowout preventer override systems

    Energy Technology Data Exchange (ETDEWEB)

    Lazar, Stephen [Christopher S. Mancini, Tomball, TX (United States)

    2012-07-01

    Events during 2010 have focused attention on increased ROV/BOP Intervention capabilities and standardization of BOP/ROV interfaces in the oil and gas offshore industry. Currently no enforced set standards for ROV intervention panels or manifold types for use on BOP Override systems are specified. The industry offers multiple configurations at present. This abstract will discuss the advantages and disadvantages of the various configurations in existence, trending toward suggested industry standards taking shape as requirements in the near term. Standards for the offshore industry or a set specification must be made to increase safety and functionality of BOP control systems. To date, ROV override capabilities have been added to existing engineered BOP systems. BOP designed closing times were not a critical consideration, only that the access was there to allow for ROV override. Increased ROV flow and pressure capabilities: no current minimum flow requirements for Emergency BOP Override pumps are established. Based on stack valving and configuration, a minimum, 7 gpm may be required to shift valving fully to allow BOP operator function. IADC/API minimum requirements may be proposed at 10 gpm at 3000psi. Based on shear pressures exceeding 3000psi, pressures of 5000psi should be considered. Current intervention skids/pump capabilities will be required if ROVs must achieve API 16D BOP minimum closing times. Remote or isolated accumulation for increased intervention capabilities offers possibilities when ANY ROV of opportunity can trigger a function (such as small inspection type ROVs). Increased volumes will be required. This is critical in functioning stack rams with an ROV of opportunity to achieve API 16D closing times. We now understand that higher flows and pressures are required along with standardization of stab types. Current recommendations: API 17H Hi-Flow manifolds should be added to essential ROV overrides. ROV skids will have a minimum requirement of 10gpm

  17. HUD INFORMATION SYSTEMS: Immature Software Acquisition Capability Increases Project Risks

    National Research Council Canada - National Science Library

    2001-01-01

    .... GAO has designated HUD's major program areas as high risk, in part because the department's information and financial management systems were poorly integrated, ineffective, and generally unreliable...

  18. Global positioning system : challenges in sustaining and upgrading capabilities persist.

    Science.gov (United States)

    2010-09-01

    The Global Positioning System (GPS) provides positioning, navigation, and timing (PNT) data to users worldwide. The U.S. Air Force, which is responsible for GPS acquisition, is in the process of modernizing the system. Last year GAO reported that it ...

  19. An open source, wireless capable miniature microscope system

    Science.gov (United States)

    Liberti, William A., III; Perkins, L. Nathan; Leman, Daniel P.; Gardner, Timothy J.

    2017-08-01

    Objective. Fluorescence imaging through head-mounted microscopes in freely behaving animals is becoming a standard method to study neural circuit function. Flexible, open-source designs are needed to spur evolution of the method. Approach. We describe a miniature microscope for single-photon fluorescence imaging in freely behaving animals. The device is made from 3D printed parts and off-the-shelf components. These microscopes weigh less than 1.8 g, can be configured to image a variety of fluorophores, and can be used wirelessly or in conjunction with active commutators. Microscope control software, based in Swift for macOS, provides low-latency image processing capabilities for closed-loop, or BMI, experiments. Main results. Miniature microscopes were deployed in the songbird premotor region HVC (used as a proper name), in singing zebra finches. Individual neurons yield temporally precise patterns of calcium activity that are consistent over repeated renditions of song. Several cells were tracked over timescales of weeks and months, providing an opportunity to study learning related changes in HVC. Significance. 3D printed miniature microscopes, composed completely of consumer grade components, are a cost-effective, modular option for head-mounting imaging. These easily constructed and customizable tools provide access to cell-type specific neural ensembles over timescales of weeks.

  20. Understanding Supply Networks from Complex Adaptive Systems

    Directory of Open Access Journals (Sweden)

    Jamur Johnas Marchi

    2014-10-01

    Full Text Available This theoretical paper is based on complex adaptive systems (CAS that integrate dynamic and holistic elements, aiming to discuss supply networks as complex systems and their dynamic and co-evolutionary processes. The CAS approach can give clues to understand the dynamic nature and co-evolution of supply networks because it consists of an approach that incorporates systems and complexity. This paper’s overall contribution is to reinforce the theoretical discussion of studies that have addressed supply chain issues, such as CAS.

  1. Evaluating the operations capability of Freedom's Data Management System

    Science.gov (United States)

    Sowizral, Henry A.

    1990-01-01

    Three areas of Data Management System (DMS) performance are examined: raw processor speed, the subjective speed of the Lynx OS X-Window system, and the operational capacity of the Runtime Object Database (RODB). It is concluded that the proposed processor will operate at its specified rate of speed and that the X-Window system operates within users' subjective needs. It is also concluded that the RODB cannot provide the required level of service, even with a two-order of magnitude (100 fold) improvement in speed.

  2. Expedited Systems Engineering for Rapid Capability and Urgent Needs

    Science.gov (United States)

    2012-12-31

    Alternative 1 Alternative 2 Alternative 1 Alternative 2 Alternative 3 Management Systems AS9100 or ISO 9001 Compliant AS9100 Complaint AS9100 Complaint...Systems Engineering Research Center ,Stevens Institute of Technology ,1 Castle Point on Hudson,Hoboken,NJ,07030 8. PERFORMING ORGANIZATION REPORT NUMBER...9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 12. DISTRIBUTION

  3. The ERP capabilities for enhancing the logistic system integration

    OpenAIRE

    Traian Surcel; Razvan Bologa

    2008-01-01

    The increase of companies’ competitiveness as a consequence of globalization and the expansion of the business relations in the web environment requires an approach, in a new dimension, on logistic systems based on a model of arborescent integration of logistic processes, on parallelism of the flows and optimization. Four axes of the integration process had been identified in the research, axes which allow the achievement of these systems interface function between demand side and supply side...

  4. Status, plans, and capabilities of the Nuclear Criticality Information System

    International Nuclear Information System (INIS)

    Koponen, B.L.

    1984-01-01

    The Nuclear Criticality Information System (NCIS), in preparation since 1981, has substantially evolved and now contains a growing number of resources pertinent to nuclear criticality safety. These resources include bibliographic compilations, experimental data, communications media, and the International Directory of Nuclear Criticality Safety Personnel. These resources are part of the LLNL Technology Information System (TIS) which provides the host computer for NCIS. The TIS provides nationwide access to authorized members of the nuclear criticality community via interactive dial-up from computer terminals that utilize communication facilities such as commercial and federal telephone networks, toll-free WATS lines, TYMNET, and the ARPANET/MILNET computer network

  5. System on a chip with MPEG-4 capability

    Science.gov (United States)

    Yassa, Fathy; Schonfeld, Dan

    2002-12-01

    Current products supporting video communication applications rely on existing computer architectures. RISC processors have been used successfully in numerous applications over several decades. DSP processors have become ubiquitous in signal processing and communication applications. Real-time applications such as speech processing in cellular telephony rely extensively on the computational power of these processors. Video processors designed to implement the computationally intensive codec operations have also been used to address the high demands of video communication applications (e.g., cable set-top boxes and DVDs). This paper presents an overview of a system-on-chip (SOC) architecture used for real-time video in wireless communication applications. The SOC specifications answer to the system requirements imposed by the application environment. A CAM-based video processor is used to accelerate data intensive video compression tasks such as motion estimations and filtering. Other components are dedicated to system level data processing and audio processing. A rich set of I/Os allows the SOC to communicate with other system components such as baseband and memory subsystems.

  6. Nationwide differential global positioning system (NDGPS) : capabilities and potential.

    Science.gov (United States)

    2009-06-01

    NDGPS is a National PNT Utility: : -Operated/managed by Coast Guard as a Combined NDGPS (Maritime + DOT + ACOE sites) : -System Specifications : --Corrections broadcast at 285 and 325 kHz using Minimum shift Keying (MSK) modulation : --Real-time diff...

  7. Understanding Absorptive Capacities is an "Innovation Systems" Context

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    2004-01-01

    This paper seeks to broaden our understanding of the concept underlying absorptive capacity atthe macro -level, paying particular attention to the growth and development perspectives. Weprovide definitions of absorptive and technological capacity, external technology flows,productivity growth......, employment creation and their interrelations. We then analyse the elementsof absorptive capability, focusing on the nature of the relationship within a systems view of aneconomy, focusing primarily on the role of firm and non-firm actors and the institutions thatconnect them, both within and across borders....... We also undertake to explain how the nature ofabsorptive capacity changes with stages of economic development, and the importance of thedifferent aspects of absorptive capability at different stages. The relationship is not a linear one:the benefits that accrue from marginal increases in absorptive...

  8. Understanding Absorptive Capacities is an "Innovation Systems" Context

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    2004-01-01

    This paper seeks to broaden our understanding of the concept underlying absorptive capacity atthe macro -level, paying particular attention to the growth and development perspectives. Weprovide definitions of absorptive and technological capacity, external technology flows,productivity growth......, employment creation and their interrelations. We then analyse the elementsof absorptive capability, focusing on the nature of the relationship within a systems view of aneconomy, focusing primarily on the role of firm and non-firm actors and the institutions thatconnect them, both within and across borders...

  9. Multi-phase model development to assess RCIC system capabilities under severe accident conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kirkland, Karen Vierow [Texas A & M Univ., College Station, TX (United States); Ross, Kyle [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Beeny, Bradley [Texas A & M Univ., College Station, TX (United States); Luthman, Nicholas [Texas A& M Engineering Experiment Station, College Station, TX (United States); Strater, Zachary [Texas A & M Univ., College Station, TX (United States)

    2017-12-23

    The Reactor Core Isolation Cooling (RCIC) System is a safety-related system that provides makeup water for core cooling of some Boiling Water Reactors (BWRs) with a Mark I containment. The RCIC System consists of a steam-driven Terry turbine that powers a centrifugal, multi-stage pump for providing water to the reactor pressure vessel. The Fukushima Dai-ichi accidents demonstrated that the RCIC System can play an important role under accident conditions in removing core decay heat. The unexpectedly sustained, good performance of the RCIC System in the Fukushima reactor demonstrates, firstly, that its capabilities are not well understood, and secondly, that the system has high potential for extended core cooling in accident scenarios. Better understanding and analysis tools would allow for more options to cope with a severe accident situation and to reduce the consequences. The objectives of this project were to develop physics-based models of the RCIC System, incorporate them into a multi-phase code and validate the models. This Final Technical Report details the progress throughout the project duration and the accomplishments.

  10. Using Open Systems Architecture to Revolutionize Capability Acquisition

    Science.gov (United States)

    2015-05-13

    OPNAV N96 / N97 / N98 N89 / N2N6 / N81S AST PMW-750 PMA-262 PMA-266 PEO(U&W) PEO(C4I) PEO(U&W) PEO(C4I) PEO(IWS) PEO(LCS) ASW COI NAVSEA I...Platform Device Services Radar Alt GPS Other Radio Computing H/W MIL-STD-1553 429 Svc 232 Svc Operating System Segment Portable Components Segment Common...Specific Services Segment I/O Services Segment Platform Device Services Radar Alt GPS Other Radio Computing H/W MIL-STD-1553 429 Svc 232 Svc

  11. Autonomous Control Capabilities for Space Reactor Power Systems

    International Nuclear Information System (INIS)

    Wood, Richard T.; Neal, John S.; Brittain, C. Ray; Mullens, James A.

    2004-01-01

    The National Aeronautics and Space Administration's (NASA's) Project Prometheus, the Nuclear Systems Program, is investigating a possible Jupiter Icy Moons Orbiter (JIMO) mission, which would conduct in-depth studies of three of the moons of Jupiter by using a space reactor power system (SRPS) to provide energy for propulsion and spacecraft power for more than a decade. Terrestrial nuclear power plants rely upon varying degrees of direct human control and interaction for operations and maintenance over a forty to sixty year lifetime. In contrast, an SRPS is intended to provide continuous, remote, unattended operation for up to fifteen years with no maintenance. Uncertainties, rare events, degradation, and communications delays with Earth are challenges that SRPS control must accommodate. Autonomous control is needed to address these challenges and optimize the reactor control design. In this paper, we describe an autonomous control concept for generic SRPS designs. The formulation of an autonomous control concept, which includes identification of high-level functional requirements and generation of a research and development plan for enabling technologies, is among the technical activities that are being conducted under the U.S. Department of Energy's Space Reactor Technology Program in support of the NASA's Project Prometheus. The findings from this program are intended to contribute to the successful realization of the JIMO mission

  12. On process capability and system availability analysis of the inverse Rayleigh distribution

    Directory of Open Access Journals (Sweden)

    Sajid Ali

    2015-04-01

    Full Text Available In this article, process capability and system availability analysis is discussed for the inverse Rayleigh lifetime distribution. Bayesian approach with a conjugate gamma distribution is adopted for the analysis. Different types of loss functions are considered to find Bayes estimates of the process capability and system availability. A simulation study is conducted for the comparison of different loss functions.

  13. Interferometric system with tracking refractometry capability in the measuring axis

    International Nuclear Information System (INIS)

    Lazar, J; Holá, M; Číp, O; Hrabina, J; Oulehla, J

    2013-01-01

    We present a combined interferometric arrangement designed for measurement of one-axis displacement over a specified measuring range with mechanical referencing. This concept allows simultaneous measurement of the carriage position from both sides together with monitoring of the overall range. This can be used in configuration with in-line monitoring of the fluctuations of the refractive index-–tracking refractometry. Similarly, the wavelength of the laser source can be stabilized over the measuring range, effectively compensating for the refractive index changes. Otherwise, monitoring of length of the measuring range can give information about the thermal dilatation effects of frame of the whole measuring setup. This technique can find its way into high-precision positioning systems in nanometrology. (technical design note)

  14. Estimating Heat and Mass Transfer Processes in Green Roof Systems: Current Modeling Capabilities and Limitations (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Tabares Velasco, P. C.

    2011-04-01

    This presentation discusses estimating heat and mass transfer processes in green roof systems: current modeling capabilities and limitations. Green roofs are 'specialized roofing systems that support vegetation growth on rooftops.'

  15. Review and revocation of access privileges distributed through capabilities. [object sharing computer systems design methodology

    Science.gov (United States)

    Gligor, V. D.

    1979-01-01

    The problems of review and revocation of access privileges are presented in the context of the systems that use capabilities for the long-term distribution of access privileges. The approach to solve these two problems requires that a capability propagation graph be maintained in memory spaces associated with subjects (e.g., domains, processes, etc.) that make copies of the respective capability; the graph remains inaccessible to those subjects, however. Parallel processes of the operating system update the graph as the system runs. It is noted that the most important application of the above mechanisms may prove to be the possibility of implementing a capability-based system in which the capability representation is short.

  16. Understanding and Modeling Teams As Dynamical Systems

    Directory of Open Access Journals (Sweden)

    Jamie C. Gorman

    2017-07-01

    Full Text Available By its very nature, much of teamwork is distributed across, and not stored within, interdependent people working toward a common goal. In this light, we advocate a systems perspective on teamwork that is based on general coordination principles that are not limited to cognitive, motor, and physiological levels of explanation within the individual. In this article, we present a framework for understanding and modeling teams as dynamical systems and review our empirical findings on teams as dynamical systems. We proceed by (a considering the question of why study teams as dynamical systems, (b considering the meaning of dynamical systems concepts (attractors; perturbation; synchronization; fractals in the context of teams, (c describe empirical studies of team coordination dynamics at the perceptual-motor, cognitive-behavioral, and cognitive-neurophysiological levels of analysis, and (d consider the theoretical and practical implications of this approach, including new kinds of explanations of human performance and real-time analysis and performance modeling. Throughout our discussion of the topics we consider how to describe teamwork using equations and/or modeling techniques that describe the dynamics. Finally, we consider what dynamical equations and models do and do not tell us about human performance in teams and suggest future research directions in this area.

  17. Investing in lean to improve basic capabilities: A strategy for system supply?

    Directory of Open Access Journals (Sweden)

    Inga-Lill Carlsson

    2017-04-01

    Full Text Available Purpose: This paper describes the perceived effects of implementing lean production in a Swedish SME contract manufacturer. Especially focused are the effects on, and possible trade-offs between, cost-efficiency and flexibility. Design/methodology/approach: SME suppliers need basic capabilities of qualitative production performance which may then be stepping-stones to develop more system supplier capabilities for added customer value: leadership to manage systems and processes, SCM, communications and relations management. Development of stable production processes is seen as a way to reach stable basic performance, efficient and with higher resource utilization. Quality is a precursor to delivery performance as well as to cost reduction and flexibility. This is a longitudinal single case study of a SME supplier striving to become a system supplier. Two main sources of data collection are used: interviews and the main author’s presence as employee and business developer, participating in and following up the ongoing change process. Findings: Two specific findings appeared: (1 An initial effect was an important “eye-opener” for the balance between cost efficiency and flexibility in the organization. (2 Process orientation, as the basis of both lean and agile approaches, allows many improvements without any conflicts or trade-offs between these two goals. Stability in the production leads to increased controllability, initially resulting in both higher cost-efficiency and higher flexibility. As the organization develops however, strategic considerations relating to the chosen market strategy might occur: cost leadership or differentiation.    Research limitations/implications: These results reflect the experiences of one SME supplier and further studies are needed for generalizability. Originality/value: The study increases the understanding of how a SME may develop stable processes in its different supplier-customer contexts. The study

  18. Understanding Arsenic Dynamics in Agronomic Systems to ...

    Science.gov (United States)

    This review is on arsenic in agronomic systems, and covers processes that influence the entry of arsenic into the human food supply. The scope is from sources of arsenic (natural and anthropogenic) in soils, biogeochemical and rhizosphere processes that control arsenic speciation and availability, through to mechanisms of uptake by crop plants and potential mitigation strategies. This review makes a case for taking steps to prevent or limit crop uptake of arsenic, wherever possible, and to work toward a long-term solution to the presence of arsenic in agronomic systems. The past two decades have seen important advances in our understanding of how biogeochemical and physiological processes influence human exposure to soil arsenic, and thus must now prompt an informed reconsideration and unification of regulations to protect the quality of agricultural and residential soils. Consumption of staple foods such as rice, beverages such as apple juice, or vegetables grown in historically arsenic-contaminated soils is now recognized as a tangible route of arsenic exposure that, in many cases, is more significant than exposure from drinking water. Understanding the sources of arsenic to crop plants and the factors that influence them is key to reducing exposure now and preventing exposure in future. In addition to the abundant natural sources of arsenic, there are a large number of industrial and agricultural sources of arsenic to the soil; from mining wastes, coal fly

  19. Enterprise and system of systems capability development life-cycle processes.

    Energy Technology Data Exchange (ETDEWEB)

    Beck, David Franklin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-08-01

    This report and set of appendices are a collection of memoranda originally drafted circa 2007-2009 for the purpose of describing and detailing a models-based systems engineering approach for satisfying enterprise and system-of-systems life cycle process requirements. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. The main thrust of the material presents a rational exposâe of a structured enterprise development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of standard systems engineering processes. While the approach described invokes application of the Department of Defense Architectural Framework (DoDAF), it is suitable for use with other architectural description frameworks.

  20. Understanding Complex Construction Systems Through Modularity

    DEFF Research Database (Denmark)

    Jensen, Tor Clarke; Bekdik, Baris; Thuesen, Christian

    2014-01-01

    finds that the main driver of complexity is the fragmentation of the design and production, which causes the production modules to construct and install new product types and variants for each project as the designers are swapped for every project. The many interfaces are characteristics of an integral......This paper develops a framework for understanding complexity in construction projects by combining theories of complexity management and modularization. The framework incorporates three dimensions of product, process, and organizational modularity with the case of gypsum wall elements. The analysis...... system, rather than a modular, although the industry forces modular organizational structures. This creates a high complexity degree caused by the non-alignment of building parts and organizations and the frequent swapping of modules....

  1. Development of SFR Primary System Simulation Capability for Advanced System Codes

    Energy Technology Data Exchange (ETDEWEB)

    Hu, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Thomas, J. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Munkhzul, E. [Argonne National Lab. (ANL), Argonne, IL (United States); Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Zhang, H. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Martineau, R. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-01-14

    Under the Reactor Product Line (RPL) of DOE/NE’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, an SFR System Analysis Module is being developed at Argonne National Laboratory for whole-plant safety analysis. This tool will simulate tightly coupled physical phenomena – including nuclear fission, heat transfer, fluid dynamics, and thermal-mechanical response – in SFR structures, systems, and components. It is based on the MOOSE (Multi-physics Object-Oriented Simulation Environment) framework, which relies upon open-source libraries such as libMesh and PETSc for mesh generation, finite element analysis, and numerical solutions. This development is a coordinated effort along with the development of RELAP-7, which is an advanced safety analysis tool for light-water reactors developed at Idaho National Laboratory. The SFR Module is aimed to model and simulate the SFR systems with much higher fidelity and with well-defined and validated prediction capabilities. It will provide fast-running, modest-fidelity, whole-plant transient analyses capability, which is essential for fast turnaround design scoping and engineering analyses.

  2. Capabilities of U.S. domestic transportation systems for the shipment of radioactive wastes

    International Nuclear Information System (INIS)

    Best, R.E.; Allen, J.H.; Aucoin, P.A.; Ball, G.D.; Hoffman, C.C.; Mason, M.E.; Propes, W.A.; Vizzini, T.A.

    1977-09-01

    This document is a compilation of data and reports that provide an overview of the capabilities of U.S. domestic transportation systems for the shipment of materials that are or may be classified as radioactive wastes

  3. Up close and real: living and learning in a remote community builds students' cultural capabilities and understanding of health disparities.

    Science.gov (United States)

    Thackrah, Rosalie D; Hall, Maeva; Fitzgerald, Kathryn; Thompson, Sandra C

    2017-07-06

    Rural and remote communities in Australia fare worse than their urban counterparts across major health indicators, with geographic isolation, restricted accessibility to health services, socioeconomic disadvantage, lifestyle and behavioural factors all implicated in poorer health outcomes. Health disparities, which are especially stark in Australian Aboriginal and Torres Strait Islander populations, underscore the urgent need to build a culturally responsive and respectful rural health workforce. Allied health student placements in settings with high Aboriginal populations provide opportunities for the development of cultural capabilities and observation of the causes and impact of health disparities. A service learning pedagogy underpinned by strong campus-community partnerships can contribute to effective situated learning. Positive placement experiences can also encourage future rural practice alleviating workforce shortages. This article reports on the first stage of a proposed longitudinal investigation into the impact of remote placements on clinical practice and employment choices. In-depth interviews were undertaken with health science students and recent graduates from Australian universities who spent up to 4 weeks at the remote community of Mt. Magnet (Badimaya country) in Western Australia. Interviews, which occurred between two and 12 months following the placement were recorded, transcribed and thematically analysed for patterns of meaning. Factors which contributed to positive professional, personal and socially responsive learning experiences were identified. These included pre-placement cultural training to build understanding of the local Aboriginal community, peer support, community engagement, cultural exchanges and interprofessional collaboration. Highlights were associated with relationship-building in the community and opportunities to apply insights into Aboriginal cultural ways to clinical and community practice. The role of the

  4. Outcomes of an International Coordination Workshop to Understand Aerosol Observability Capabilities and Requirements for the Next Decade

    Science.gov (United States)

    Reid, J. S.; Benedetti, A.; Colarco, P. R.; Carmichael, G. R.; Icap Team

    2010-12-01

    In late April 2010 roughly 15 developers for many of the world’s operational numerical weather prediction centers with aerosol forecasting mandates met with an equal number of representatives of satellite data providers to discuss aerosol observability issues facing the next generation of aerosol forecast and modeling systems. While the last 3 years has seen rapid operational implementation of aerosol and pollution models around the world, the key to further development of these models is aerosol observational data from satellites for model evaluation and data assimilation. However, while the dynamical meteorology community has a well developed near real-time observing system to support forecasting, the aerosol community is only beginning to address the problem. This meeting was the first ever to combine the lead aerosol developers and remote sensing data providers from around the globe in discussing state-of-the-art technologies and operational requirements for aerosol forecasting. Participants included: operational centers representatives of ECMWF, FNMOC, JMA, NCEP, and UKMO; remote sensing data providers from EUMETSAT, ESA, JAXA, NASA, and NOAA NESDIS; and additional developers from NASA GMAO, NGST, NOAA, NRL, and several universities. Indeed, the smooth transition from the NASA EOS/A-Train into the international constellation of multi-model, multi-sensor products which satisfy both research and operational communities will require coordination among all of the above participants. In this paper, we provide an overview of important meeting outcomes that should interest the broader atmospheric composition community, including an overview of future satellite and ground systems and their capabilities, key definitions of operational diction, desires for error metrics, specialized product development, and customer outreach and research product delivery. These outcomes are already effecting CONOPS at major data and forecasting sensors.

  5. A study on electricity export capability of the μCHP system with spot price

    DEFF Research Database (Denmark)

    You, Shi; Træholt, Chresten; Poulsen, Bjarne

    2009-01-01

    When a number of muCHP systems are aggregated as a virtual power plant (VPP), they will be able to participate in the electricity wholesale market with no discrimination compared to conventional large power plants. Hence, this paper investigates the electricity export capability of the muCHP system...... when the electricity buyback price is given at a value equalizing the dynamic spot price. A muCHP system is modeled with optimized generation, and the marginal price of electricity export for such system is explained. A sensitivity analysis of several key factors, e.g. fuel price, heat to power ratio...... of the muCHP unit, which influence the export capability of muCHP system, is firstly carried out in the intraday case study, followed by the annual case study which explores the annual system performance. The results show that the electricity export capability of a muCHP system is closely related to its...

  6. Radionuclides in groundwater flow system understanding

    Science.gov (United States)

    Erőss, Anita; Csondor, Katalin; Horváth, Ákos; Mádl-Szőnyi, Judit; Surbeck, Heinz

    2017-04-01

    Using radionuclides is a novel approach to characterize fluids of groundwater flow systems and understand their mixing. Particularly, in regional discharge areas, where different order flow systems convey waters with different temperature, composition and redox-state to the discharge zone. Radium and uranium are redox-sensitive parameters, which causes fractionation along groundwater flow paths. Discharging waters of regional flow systems are characterized by elevated total dissolved solid content (TDS), temperature and by reducing conditions, and therefore with negligible uranium content, whereas local flow systems have lower TDS and temperature and represent oxidizing environments, and therefore their radium content is low. Due to the short transit time, radon may appear in local systems' discharge, where its source is the soil zone. However, our studies revealed the importance of FeOOH precipitates as local radon sources throughout the adsorption of radium transported by the thermal waters of regional flow systems. These precipitates can form either by direct oxidizing of thermal waters at discharge, or by mixing of waters with different redox state. Therefore elevated radon content often occurs in regional discharge areas as well. This study compares the results of geochemical studies in three thermal karst areas in Hungary, focusing on radionuclides as natural tracers. In the Buda Thermal Karst, the waters of the distinct discharge areas are characterized by different temperature and chemical composition. In the central discharge area both lukewarm (20-35°C, 770-980 mg/l TDS) and thermal waters (40-65°C, 800-1350 mg/l TDS), in the South only thermal water discharge (33-43°C, 1450-1700 mg/l TDS) occur. Radionuclides helped to identify mixing of fluids and to infer the temperature and chemical composition of the end members for the central discharge area. For the southern discharge zone mixing components could not be identified, which suggests different cave

  7. The Strategic Fitness Process: A Collaborative Action Research Method for Developing and Understanding Organizational Prototypes and Dynamic Capabilities

    Directory of Open Access Journals (Sweden)

    Michael Beer

    2013-04-01

    Full Text Available Organizations underperform and sometimes fail because their leaders are unable to learn the unvarnished truth from relevant stakeholders about how the design and behavior of the organization is misaligned with its goals and strategy. The Strategic Fitness Process (SFP was designed to enable leaders to overcome organizational silence about the misalignment with the environment and chosen strategy. By enabling an honest, organization-wide and public conversation, senior management teams, working collaboratively with scholar-consultants and organizational members, have access to valid data (the unvarnished truth, can conduct a valid diagnosis, and can develop a valid plan to change the structure, processes, and behavior of an organization while at the same time developing commitment that ensures execution. SFP is also a research method. By applying SFP iteratively to new and challenging situations, scholar-consultants can invent new organizational prototypes as well as learn if a standardized and institutionalized organizational learning process like SFP can enhance dynamic capabilities. The SFP model is illustrated with an application to Hewlett-Packard’s Santa Rosa Systems Division.

  8. Available transfer capability evaluation and enhancement using various FACTS controllers: Special focus on system security

    Directory of Open Access Journals (Sweden)

    M. Venkateswara Rao

    2016-03-01

    Full Text Available Nowadays, because of the deregulation of the power industry the continuous increase of the load increases the necessity of calculation of available transfer capability (ATC of a system to analyze the system security. With this calculation, the scheduling of generator can be decided to decrease the system severity. Further, constructing new transmission lines, new substations are very cost effective to meet the increasing load and to increase the transfer capability. Hence, an alternative way to increase the transfer capability is use of flexible ac transmission system (FACTS controllers. In this paper, SSSC, STACOM and UPFC are considered to show the effect of these controllers in enhancing system ATC. For this, a novel current based modeling and optimal location strategy of these controllers are presented. The proposed methodology is tested on standard IEEE-30 bus and IEEE-57 bus test systems with supporting numerical and graphical results.

  9. An Approach to Semantic Interoperability for Improved Capability Exchanges in Federations of Systems

    Science.gov (United States)

    Moschoglou, Georgios

    2013-01-01

    This study seeks an affirmative answer to the question whether a knowledge-based approach to system of systems interoperation using semantic web standards and technologies can provide the centralized control of the capability for exchanging data and services lacking in a federation of systems. Given the need to collect and share real-time…

  10. Active Storage with Analytics Capabilities and I/O Runtime System for Petascale Systems

    Energy Technology Data Exchange (ETDEWEB)

    Choudhary, Alok [Northwestern Univ., Evanston, IL (United States)

    2015-03-18

    Computational scientists must understand results from experimental, observational and computational simulation generated data to gain insights and perform knowledge discovery. As systems approach the petascale range, problems that were unimaginable a few years ago are within reach. With the increasing volume and complexity of data produced by ultra-scale simulations and high-throughput experiments, understanding the science is largely hampered by the lack of comprehensive I/O, storage, acceleration of data manipulation, analysis, and mining tools. Scientists require techniques, tools and infrastructure to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis, statistical analysis and knowledge discovery. The goal of this work is to enable more effective analysis of scientific datasets through the integration of enhancements in the I/O stack, from active storage support at the file system layer to MPI-IO and high-level I/O library layers. We propose to provide software components to accelerate data analytics, mining, I/O, and knowledge discovery for large-scale scientific applications, thereby increasing productivity of both scientists and the systems. Our approaches include 1) design the interfaces in high-level I/O libraries, such as parallel netCDF, for applications to activate data mining operations at the lower I/O layers; 2) Enhance MPI-IO runtime systems to incorporate the functionality developed as a part of the runtime system design; 3) Develop parallel data mining programs as part of runtime library for server-side file system in PVFS file system; and 4) Prototype an active storage cluster, which will utilize multicore CPUs, GPUs, and FPGAs to carry out the data mining workload.

  11. Multiprocessor based 4K data acquisition system with enhanced system capabilities

    International Nuclear Information System (INIS)

    Mohindra, N.V.; Ram, L.S.; Gopalakrishnan, K.R.; Bayala, A.K.

    1989-01-01

    A multiprocessor based 4K data acquisition system has been designed using a number of processors working simultaneously to give enhanced system capabilities. The master processor is assigned to carry out high speed data acquisition and display of spectrum and on line computations while second processor gives independently alpha-numeric page display for communications. A third processor which may even be a personal computer is assigned to carry out complex calculations required for processing data acquired by master processor. All these processors communicate with each other through serial link leaving no chance of bus contention of any type. A novel method has been incorporated into the system to have maximum utilization for master processor power. This enables full 4K live spectrum display on XYZ unit with multiple cursor markers and selected regions of interest, expanded display of ROI, intensified regions of special interest, and also allows alpha-numeric display on same XYZ unit. Even with all this for ADC with 4μ sec conversion time, the system virtually offers zero dead time for data acquisition and storage. When used as a stand alone system without PC, processing functions like Area Integration, Peak Analysis, Spectrum smoothening and Energy calibration have been incorporated. (author)

  12. Implementing NASA's Capability-Driven Approach: Insight into NASA's Processes for Maturing Exploration Systems

    Science.gov (United States)

    Williams-Byrd, Julie; Arney, Dale; Rodgers, Erica; Antol, Jeff; Simon, Matthew; Hay, Jason; Larman, Kevin

    2015-01-01

    NASA is engaged in transforming human spaceflight. The Agency is shifting from an exploration-based program with human activities focused on low Earth orbit (LEO) and targeted robotic missions in deep space to a more sustainable and integrated pioneering approach. Through pioneering, NASA seeks to address national goals to develop the capacity for people to work, learn, operate, live, and thrive safely beyond the Earth for extended periods of time. However, pioneering space involves more than the daunting technical challenges of transportation, maintaining health, and enabling crew productivity for long durations in remote, hostile, and alien environments. This shift also requires a change in operating processes for NASA. The Agency can no longer afford to engineer systems for specific missions and destinations and instead must focus on common capabilities that enable a range of destinations and missions. NASA has codified a capability driven approach, which provides flexible guidance for the development and maturation of common capabilities necessary for human pioneers beyond LEO. This approach has been included in NASA policy and is captured in the Agency's strategic goals. It is currently being implemented across NASA's centers and programs. Throughout 2014, NASA engaged in an Agency-wide process to define and refine exploration-related capabilities and associated gaps, focusing only on those that are critical for human exploration beyond LEO. NASA identified 12 common capabilities ranging from Environmental Control and Life Support Systems to Robotics, and established Agency-wide teams or working groups comprised of subject matter experts that are responsible for the maturation of these exploration capabilities. These teams, called the System Maturation Teams (SMTs) help formulate, guide and resolve performance gaps associated with the identified exploration capabilities. The SMTs are defining performance parameters and goals for each of the 12 capabilities

  13. Life and Understanding: The Origins of "Understanding" in Self-Organizing Nervous Systems.

    Science.gov (United States)

    Yufik, Yan M; Friston, Karl

    2016-01-01

    This article is motivated by a formulation of biotic self-organization in Friston (2013), where the emergence of "life" in coupled material entities (e.g., macromolecules) was predicated on bounded subsets that maintain a degree of statistical independence from the rest of the network. Boundary elements in such systems constitute a Markov blanket ; separating the internal states of a system from its surrounding states. In this article, we ask whether Markov blankets operate in the nervous system and underlie the development of intelligence, enabling a progression from the ability to sense the environment to the ability to understand it. Markov blankets have been previously hypothesized to form in neuronal networks as a result of phase transitions that cause network subsets to fold into bounded assemblies, or packets (Yufik and Sheridan, 1997; Yufik, 1998a). The ensuing neuronal packets hypothesis builds on the notion of neuronal assemblies (Hebb, 1949, 1980), treating such assemblies as flexible but stable biophysical structures capable of withstanding entropic erosion. In other words, structures that maintain their integrity under changing conditions. In this treatment, neuronal packets give rise to perception of "objects"; i.e., quasi-stable (stimulus bound) feature groupings that are conserved over multiple presentations (e.g., the experience of perceiving "apple" can be interrupted and resumed many times). Monitoring the variations in such groups enables the apprehension of behavior; i.e., attributing to objects the ability to undergo changes without loss of self-identity. Ultimately, "understanding" involves self-directed composition and manipulation of the ensuing "mental models" that are constituted by neuronal packets, whose dynamics capture relationships among objects: that is, dependencies in the behavior of objects under varying conditions. For example, movement is known to involve rotation of population vectors in the motor cortex (Georgopoulos et al

  14. Engaging Systems Understanding through Games (Invited)

    Science.gov (United States)

    Pfirman, S. L.; Lee, J. J.; Eklund, K.; Turrin, M.; O'Garra, T.; Orlove, B. S.

    2013-12-01

    The Polar Learning And Responding (PoLAR) Climate Change Education Partnership (CCEP), supported by the National Science Foundation's CCEP Phase II program, uses novel educational approaches to engage adult learners and to inform public understanding about climate change. Both previous studies and our experience show that games and game-like activities lead people to explore systems and motivate problem-solving. This presentation focuses on three games developed by the PoLAR team: a multiplayer card game, a strategy board game, and a serious game, and discusses them within the larger framework of research and evaluation of learning outcomes. In the multiplayer card game EcoChains: Arctic Crisis, players learn how to build marine food chains, then strategize ways to make them resilient to a variety of natural and anthropogenic events. In the strategy board game Arctic SMARTIC (Strategic MAnagement of Resources in TImes of Change), participants take on roles, set developmental priorities, and then negotiate to resolve conflicts and deal with climate change scenarios. In the serious game FUTURE COAST, players explore "what if" scenarios in a collaborative narrative environment. Grounded on the award-winning WORLD WITHOUT OIL, which employed a similar story frame to impart energy concepts and realities, FUTURE COAST uses voicemails from the future to impel players through complexities of disrupted systems and realities of human interactions when facing change. Launching February 2014, FUTURE COAST is played online and in field events; players create media designed to be spreadable through their social networks. As players envision possible futures, they create diverse communities of practice that synthesize across human-environment interactions. Playtests highlight how the game evokes systems thinking, and engages and problem-solves via narrative: * 'While I was initially unsure how I'd contribute to a group I'd never met, the project itself proved so engaging that I

  15. How Cisco Systems Used Enterprise Architecture Capability to Sustain Acquisition-Based Growth

    DEFF Research Database (Denmark)

    Toppenberg, Gustav; Shanks, Graeme; Henningsson, Stefan

    2015-01-01

    Value-creating acquisitions are a major challenge for many firms. The case of Cisco Systems shows that an advanced enterprise architecture (EA) capability can contribute to the four phases of the acquisition process: pre-acquisition preparation, acquisition selection, acquisition integration...... and post-integration management. Cisco’s EA capability improves its ability to rapidly capture value from acquisitions and to sustain its acquisition-based growth strategy over time....

  16. Application of sPC-SAFT and group contribution sPC-SAFT to polymer systems-Capabilities and limitations

    DEFF Research Database (Denmark)

    Tihic, Amra; von Solms, Nicolas; Michelsen, Michael Locht

    2009-01-01

    PC-SAFT model, with and without GC. The reported results contribute to a better understanding of the applicability of the sPC-SAFT model to binary polymer mixtures, and identify both models as good predictive tools for several industrial applications. Limitations are also identified and discussed....... predictive capability of the model demonstrates satisfactory description of the fluid behaviour of several polymer systems, including both vapour-liquid equilibria and liquid-liquid equilibria. This work continues the systematic study on phase behaviour of polymer systems with the two versions of the s...

  17. Understanding cities as social-ecological systems

    CSIR Research Space (South Africa)

    Du Plessis, C

    2008-09-01

    Full Text Available This paper builds on earlier ecological approaches to urban development, as well as more recent thinking in the fields of sustainability science, resilience thinking and complexity theory, to propose a conceptual framework for understanding cities...

  18. Social Change: Toward an Informed and Critical Understanding of Social Justice and the Capabilities Approach in Community Psychology.

    Science.gov (United States)

    Munger, Felix; MacLeod, Tim; Loomis, Colleen

    2016-03-01

    Community psychology has long been concerned with social justice. However, deployments of this term are often vague and undertheorized. To address this weakness in the field's knowledge body we explored John Rawls's theory of social justice and Amartya Sen's economic theory of the capabilities approach and evaluated each for its applicability to community psychology theory, research, and action. Our unpacking of the philosophical and political underpinnings of Rawlsian theory of social justice resulted in identifying characteristics that limit the theory's utility in community psychology, particularly in its implications for action. Our analysis of the capability approach proposed by Amartya Sen revealed a framework that operationalizes social justice in both research and action, and we elaborate on this point. Going beyond benefits to community psychology in adopting the capabilities approach, we posit a bi-directional relationship and discuss how community psychology might also contribute to the capabilities approach. We conclude by suggesting that community psychology could benefit from a manifesto or proclamation that provides a historical background of social justice and critiques the focus on the economic, sociological, and philosophical theories that inform present-day conceptualizations (and lack thereof) of social justice for community psychology. © Society for Community Research and Action 2016.

  19. Power transfer capability assessment of transmission interfaces with SVC and load shedding systems

    Energy Technology Data Exchange (ETDEWEB)

    Pavlovsky, V. [DMCC-Engineering, Kiev (Ukraine). Inst. of Electrodynamics; Dolzhenitsa, Y. [DMCC Engineering, Kiev (Ukraine); Ushapovskiy, K. [National Power Co. Ukrenergo, Kiev (Ukraine)

    2009-07-01

    As a result of deregulation in the power industry, energy trade and markets are pushing transmission system operators to operate their systems closer to the edge of the power transfer capability. Voltage instability and inadequate reactive power support of generators is a key factor in most major outages around the world. The ideal way to control power systems is to avoid emergencies by reliable planning and secure operation of power systems. Therefore, the accurate calculation of the power transfer capability of transmission interfaces is an important task on the planning and operation stages. This paper discussed the issue of transfer capability assessment and monitoring for interfaces with static var compensator (SVC) and load shedding schemes. It also proposed a special measure, a distance to voltage instability point, to monitor transfer capability on-line. The distance may be observed by measurement of SVC output. The paper considered the problem of optimal SVC size selection and a new approach was proposed based on P-V curves analysis. The paper discussed the problem formulation and proposed approach. A case was also presented in order to demonstrate the proposed approach on the IPS Ukraine-Crimea interface. It was concluded that the proposed approach allows the optimal rating of SVC for increasing transfers capability of transmission corridors. 12 refs., 9 figs.

  20. A Comparative Analysis of Using the Capability Notion for Congruent Business and Information Systems Engineering

    Directory of Open Access Journals (Sweden)

    Jelena Zdravkovic

    2017-04-01

    Full Text Available The notion of capability has been gaining a growing attention in the business and information system (IS engineering community due to a number of reasons: it facilitates focus on business investments, it can be used as a baseline for business planning, and it directly leads to service specification and design. It is not however widely known to what extent capability is considered in different modeling approaches, how it is defined, and what purpose it fulfills. This article analyzes how the notion of capability is included in the frameworks spanning from business-oriented such as Business Architecture and Business Value Modeling, to the alignment-oriented represented by Enterprise Architecture (EA, and Enterprise Modeling (EM. The results of the analysis have shown that capability has widespread presence in the frameworks and that its conceptual meaning is largely similar, while the intentions and the mechanisms of its use differ, which raises stimulating opportunities for new contributions and improvements in the field.

  1. Study of gamma detection capabilities of the REWARD mobile spectroscopic system

    Science.gov (United States)

    Balbuena, J. P.; Baptista, M.; Barros, S.; Dambacher, M.; Disch, C.; Fiederle, M.; Kuehn, S.; Parzefall, U.

    2017-07-01

    REWARD is a novel mobile spectroscopic radiation detector system for Homeland Security applications. The system integrates gamma and neutron detection equipped with wireless communication. A comprehensive simulation study on its gamma detection capabilities in different radioactive scenarios is presented in this work. The gamma detection unit consists of a precise energy resolution system based on two stacked (Cd,Zn)Te sensors working in coincidence sum mode. The volume of each of these CZT sensors is 1 cm3. The investigated energy windows used to determine the detection capabilities of the detector correspond to the gamma emissions from 137Cs and 60Co radioactive sources (662 keV and 1173/1333 keV respectively). Monte Carlo and Technology Computer-Aided Design (TCAD) simulations are combined to determine its sensing capabilities for different radiation sources and estimate the limits of detection of the sensing unit as a function of source activity for several shielding materials.

  2. Understanding COBOL systems using inferred types

    NARCIS (Netherlands)

    A. van Deursen (Arie); L.M.F. Moonen (Leon)

    1999-01-01

    textabstractIn a typical COBOL program, the data division consists of 50 of the lines of code. Automatic type inference can help to understand the large collections of variable declarations contained therein, showing how variables are related based on their actual usage. The most problematic aspect

  3. How to design electrical systems with central control capability for industrial plants

    Energy Technology Data Exchange (ETDEWEB)

    Cigolini, S.; Galati, G.; Lionetto, P.F.; Stiz, M. (Siemens, Milan (Italy) Centro Elettrotecnico Sperimentale Italiano, Milan (Italy))

    1991-12-01

    The modern centralized control system, incorporating microprocessors, constitutes an extremely efficacious instrument for the management of an industrial plant's electrical system and provides the performance, reliability, flexibility and safety features required by today's technologically advanced plant processes. The use of intelligent centralized control systems, capable of autonomous operation and dialoguing with industrial plant electrical systems, simplifies the design of the overall plant. This paper reviews the main design criteria for the automated systems and gives examples of some suitable commercially available intelligent systems.

  4. Understanding aging in containment cooling systems

    International Nuclear Information System (INIS)

    Lofaro, R.J.

    1993-01-01

    A study has been performed to assess the effects of aging in nuclear power plant containment cooling systems. Failure records from national databases, as well as plant specific data were reviewed and analyzed to identify aging characteristics for this system. The predominant aging mechanisms were determined, along with the most frequently failed components and their associated failure modes. This paper discusses the aging mechanisms present in the containment spray system and the containment fan cooler system, which are two systems used to provide the containment cooling function. The failure modes, along with the relative frequency of each is also discussed

  5. Directed Design of Experiments for Validating Probability of Detection Capability of NDE Systems (DOEPOD)

    Science.gov (United States)

    Generazio, Edward R.

    2015-01-01

    Directed Design of Experiments for Validating Probability of Detection Capability of NDE Systems (DOEPOD) Manual v.1.2 The capability of an inspection system is established by applications of various methodologies to determine the probability of detection (POD). One accepted metric of an adequate inspection system is that there is 95% confidence that the POD is greater than 90% (90/95 POD). Design of experiments for validating probability of detection capability of nondestructive evaluation (NDE) systems (DOEPOD) is a methodology that is implemented via software to serve as a diagnostic tool providing detailed analysis of POD test data, guidance on establishing data distribution requirements, and resolving test issues. DOEPOD demands utilization of observance of occurrences. The DOEPOD capability has been developed to provide an efficient and accurate methodology that yields observed POD and confidence bounds for both Hit-Miss or signal amplitude testing. DOEPOD does not assume prescribed POD logarithmic or similar functions with assumed adequacy over a wide range of flaw sizes and inspection system technologies, so that multi-parameter curve fitting or model optimization approaches to generate a POD curve are not required. DOEPOD applications for supporting inspector qualifications is included.

  6. Social Capital, IT Capability, and the Success of Knowledge Management Systems

    Directory of Open Access Journals (Sweden)

    Irene Y.L. Chen

    2009-03-01

    Full Text Available Many organizations have implemented knowledge management systems to support knowledge management. However, many of such systems have failed due to the lack of relationship networks and IT capability within organizations. Motivated by such concerns, this paper examines the factors that may facilitate the success of knowledge management systems. The ten constructs derived from social capital theory, resource-based view and IS success model are integrated into the current research model. Twenty-one hypotheses derived from the research model are empirically validated using a field survey of KMS users. The results suggest that social capital and organizational IT capability are important preconditions of the success of knowledge management systems. Among the posited relationships, trust, social interaction ties, IT capability do not significantly impact service quality, system quality and IT capability, respectively. Against prior expectation, service quality and knowledge quality do not significantly influence perceived KMS benefits and user satisfaction, respectively. Discussion of the results and conclusion are provided. This study then provides insights for future research avenue.

  7. Technical Requirements Analysis and Control Systems (TRACS) Initial Operating Capability (IOC) documentation

    Science.gov (United States)

    Hammond, Dana P.

    1991-01-01

    The Technical Requirements Analysis and Control Systems (TRACS) software package is described. TRACS offers supplemental tools for the analysis, control, and interchange of project requirements. This package provides the fundamental capability to analyze and control requirements, serves a focal point for project requirements, and integrates a system that supports efficient and consistent operations. TRACS uses relational data base technology (ORACLE) in a stand alone or in a distributed environment that can be used to coordinate the activities required to support a project through its entire life cycle. TRACS uses a set of keyword and mouse driven screens (HyperCard) which imposes adherence through a controlled user interface. The user interface provides an interactive capability to interrogate the data base and to display or print project requirement information. TRACS has a limited report capability, but can be extended with PostScript conventions.

  8. Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach.

    Science.gov (United States)

    Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

    2017-06-01

    Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach's alpha of 75%. Data was analyzed using the decision Delphi technique. GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information.

  9. Does a summative portfolio foster the development of capabilities such as reflective practice and understanding ethics? An evaluation from two medical schools.

    Science.gov (United States)

    O'Sullivan, Anthony J; Howe, Amanda C; Miles, Susan; Harris, Peter; Hughes, Chris S; Jones, Philip; Scicluna, Helen; Leinster, Sam J

    2012-01-01

    Portfolios need to be evaluated to determine whether they encourage students to develop in capabilities such as reflective practice and ethical judgment. The aims of this study were (i) to determine whether preparing a portfolio helps promote students' development in a range of capabilities including understanding ethical and legal principles, reflective practice and effective communication, and (ii) to determine to what extent the format of the portfolio affected the outcome by comparing the experiences of students at two different medical schools. A questionnaire was designed to evaluate undergraduate medical students' experiences of completing a portfolio at two medical schools. A total of 526 (45% response rate) students answered the on-line questionnaire. Students from both medical schools gave the highest ranking for the portfolio as a trigger for reflective practice. 63% of students agreed their portfolio helped them develop reflective practice skills (p portfolios helped them understand ethical and legal principles whereas 29% disagreed (p portfolio helped them to develop effective communication. Students perceive portfolio preparation as an effective learning tool for the development of capabilities such as understanding ethical and legal principles and reflective practice, whereas other capabilities such as effective communication require complementary techniques and other modes of assessment.

  10. A capability study of micro moulding for nano fluidic system manufacture

    DEFF Research Database (Denmark)

    Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido

    2013-01-01

    With the present paper the authors analysed process capability of ultra-precision moulding used for producing nano crosses with the same critical channels dimensions of a nano fluidic system for optical mapping of genomic length DNA. The process variation focused on product tolerances is quantified...

  11. Trustworthy reconfigurable systems enhancing the security capabilities of reconfigurable hardware architectures

    CERN Document Server

    Feller, Thomas

    2014-01-01

    ?Thomas Feller sheds some light on trust anchor architectures fortrustworthy reconfigurable systems. He is presenting novel concepts enhancing the security capabilities of reconfigurable hardware.Almost invisible to the user, many computer systems are embedded into everyday artifacts, such as cars, ATMs, and pacemakers. The significant growth of this market segment within the recent years enforced a rethinking with respect to the security properties and the trustworthiness of these systems. The trustworthiness of a system in general equates to the integrity of its system components. Hardware-b

  12. Capabilities of the DOE Remote Sensing Laboratory`s aerial measuring system

    Energy Technology Data Exchange (ETDEWEB)

    Riedhauser, S.R.

    1995-09-01

    This report describes the capabilities of the Remote Sensing Laboratory`s aircraft for use in environmental radiation surveys, multispectral (visible, near infrared, and thermal infrared) surveys of vegetation and buildings, and photographic documentation of the areas covered by the two other surveys. The report discusses the technical capabilities of the various systems and presents examples of the data from a recent demonstration survey. To provide a view of the types of surveys the Remote Sensing Laboratory has conducted in the past, the appendices describe several of the previous area surveys and emergency search surveys.

  13. Optical engineering: understanding optical system by experiments

    Science.gov (United States)

    Scharf, Toralf

    2017-08-01

    Students have to be educated in theoretical and practical matters. Only one of them does not allow attacking complex problems in research, development, and management. After their study, students should be able to design, construct and analyze technical problems at highest levels of complexity. Who never experienced the difficulty of setting up measurements will not be able to understand, plan and manage such complex tasks in her/his future career. At EPFL a course was developed for bachelor education and is based on three pillars: concrete actions (enactive) to be done by the students, a synthesis of their work by writing a report (considered as the iconic part) and inputs from the teacher to generalize the findings and link it to a possible complete abstract description (symbolic). Intensive tutoring allowed an intermodal transfer between these categories. This EIS method originally introduced by Jerome Bruner for small children is particular well adapted for engineer education for which theoretical understanding often is not enough. The symbiosis of ex-cathedra lecture and practical work in a classroom-like situation presents an innovative step towards integrated learning that complements perfectly more abstract course principles like online courses.

  14. Understanding The Resistance to Health Information Systems

    OpenAIRE

    David Ackah; Angelito E Alvarado; Heru Santoso Wahito Nugroho; Sanglar Polnok; Wiwin Martiningsih

    2017-01-01

    User resistance is users’ opposition to system implementation. Resistance often occurs as a result of a mismatch between management goals and employee preferences. There are two types of resistance to health iformation system namely active resistance and passive resistance. The manifestation of active resistance are being critical,  blaming/accusing, blocking, fault finding, sabotaging, undermining, ridiculing, intimidating/threatening, starting rumors, appealing to fear, manipulating arguing...

  15. Production monitoring system for understanding product robustness

    DEFF Research Database (Denmark)

    Boorla, Srinivasa Murthy; Howard, Thomas J.

    2016-01-01

    study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality...... to be seven days. Using the monitoring system for the PRECI‐IN case, similar corrective action would have been achieved almost immediately.......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...

  16. Design and implementation of a robot control system with traded and shared control capability

    Science.gov (United States)

    Hayati, S.; Venkataraman, S. T.

    1989-01-01

    Preliminary results are reported from efforts to design and develop a robotic system that will accept and execute commands from either a six-axis teleoperator device or an autonomous planner, or combine the two. Such a system should have both traded as well as shared control capability. A sharing strategy is presented whereby the overall system, while retaining positive features of teleoperated and autonomous operation, loses its individual negative features. A two-tiered shared control architecture is considered here, consisting of a task level and a servo level. Also presented is a computer architecture for the implementation of this system, including a description of the hardware and software.

  17. New Methods for Understanding Systems Consolidation

    Science.gov (United States)

    Tayler, Kaycie K.; Wiltgen, Brian J.

    2013-01-01

    According to the standard model of systems consolidation (SMC), neocortical circuits are reactivated during the retrieval of declarative memories. This process initially requires the hippocampus. However, with the passage of time, neocortical circuits become strengthened and can eventually retrieve memory without input from the hippocampus.…

  18. Analysis of appraisal tool of system security engineering capability maturity based on component

    International Nuclear Information System (INIS)

    Liu Zhenghai; Yang Xiaohua; Zou Shuliang; Liu Yachun; Xiao Jiantian; Liu Zhiming

    2012-01-01

    Spent Fuel Reprocessing is a part of nuclear fuel cycle and is the inevitably choice of nuclear power sustainable development. Reprocessing needs to face with radiological, criticality, chemical hazards. Besides using the tradition appraisal methods based on the security goals, it is a beneficial supplement that using the appraisal method of system security engineering capability maturity model based on the process. Experts should check and approve large numbers of documents during the appraisal based on system security engineering capability maturity model, so it is necessary that developing a tool to assist the expert to complete the appraisal. The method of developing software based on component is highly effective, nimble and reliable. Component technology is analyzed, the methods of extraction model domain components and general components is introduced, and the appraisal system is developed based on component technology. (authors)

  19. Advanced E-O test capability for Army Next-Generation Automated Test System (NGATS)

    Science.gov (United States)

    Errea, S.; Grigor, J.; King, D. F.; Matis, G.; McHugh, S.; McKechnie, J.; Nehring, B.

    2015-05-01

    The Future E-O (FEO) program was established to develop a flexible, modular, automated test capability as part of the Next Generation Automatic Test System (NGATS) program to support the test and diagnostic needs of currently fielded U.S. Army electro-optical (E-O) devices, as well as being expandable to address the requirements of future Navy, Marine Corps and Air Force E-O systems. Santa Barbara infrared (SBIR) has designed, fabricated, and delivered three (3) prototype FEO for engineering and logistics evaluation prior to anticipated full-scale production beginning in 2016. In addition to presenting a detailed overview of the FEO system hardware design, features and testing capabilities, the integration of SBIR's EO-IR sensor and laser test software package, IRWindows 4™, into FEO to automate the test execution, data collection and analysis, archiving and reporting of results is also described.

  20. Building a computer-aided design capability using a standard time share operating system

    Science.gov (United States)

    Sobieszczanski, J.

    1975-01-01

    The paper describes how an integrated system of engineering computer programs can be built using a standard commercially available operating system. The discussion opens with an outline of the auxiliary functions that an operating system can perform for a team of engineers involved in a large and complex task. An example of a specific integrated system is provided to explain how the standard operating system features can be used to organize the programs into a simple and inexpensive but effective system. Applications to an aircraft structural design study are discussed to illustrate the use of an integrated system as a flexible and efficient engineering tool. The discussion concludes with an engineer's assessment of an operating system's capabilities and desirable improvements.

  1. Understanding The Resistance to Health Information Systems

    Directory of Open Access Journals (Sweden)

    David Ackah

    2017-07-01

    Full Text Available User resistance is users’ opposition to system implementation. Resistance often occurs as a result of a mismatch between management goals and employee preferences. There are two types of resistance to health iformation system namely active resistance and passive resistance. The manifestation of active resistance are being critical,  blaming/accusing, blocking, fault finding, sabotaging, undermining, ridiculing, intimidating/threatening, starting rumors, appealing to fear, manipulating arguing, using facts selectively, distorting facts and  raising objections. The manifestation of passive resistance are agreeing verbally but not following through, failing to implement change, procrastinating/dragging feet, feigning ignorance, withholding information, suggestions, help or support, and standing by and allowing the change to fail.

  2. Understanding symmetrical components for power system modeling

    CERN Document Server

    Das, J C

    2017-01-01

    This book utilizes symmetrical components for analyzing unbalanced three-phase electrical systems, by applying single-phase analysis tools. The author covers two approaches for studying symmetrical components; the physical approach, avoiding many mathematical matrix algebra equations, and a mathematical approach, using matrix theory. Divided into seven sections, topics include: symmetrical components using matrix methods, fundamental concepts of symmetrical components, symmetrical components –transmission lines and cables, sequence components of rotating equipment and static load, three-phase models of transformers and conductors, unsymmetrical fault calculations, and some limitations of symmetrical components.

  3. Study on the adjustment capability of the excitation system located inside superconducting machine electromagnetic shield

    Science.gov (United States)

    Xia, D.; Xia, Z.

    2017-12-01

    The ability for the excitation system to adjust quickly plays a very important role in maintaining the normal operation of superconducting machines and power systems. However, the eddy currents in the electromagnetic shield of superconducting machines hinder the exciting magnetic field change and weaken the adjustment capability of the excitation system. To analyze this problem, a finite element calculation model for the transient electromagnetic field with moving parts is established. The effects of three different electromagnetic shields on the exciting magnetic field are analyzed using finite element method. The results show that the electromagnetic shield hinders the field changes significantly, the better its conductivity, the greater the effect on the superconducting machine excitation.

  4. Capability and Development Time Trade-off Analysis in Systems-of-Systems

    Science.gov (United States)

    2011-04-30

    of a competitive sensor for use aboard the satellites (Smith, 2003). We assume that the STSS has a TRL level of 9 and can achieve a detection time...maximum laser power to target – Capability contribution: beam quality diff ti li it d b th t i te D, P, λ bq, SR rac on m e , q, a ncreases

  5. A Model-Based Architecture Approach to Ship Design Linking Capability Needs to System Solutions

    Science.gov (United States)

    2012-06-01

    Summers are rainy and warm with frequent typhoons. Fog is very common along the coasts and the water depth is very shallow on average, approximately...India, Iraq, Kuwait, Libya, Oman, Pakistan, Peru , Qatar, Saudia Arabia, Singapore, South Africa, UAE, Venezuela The threat aircraft used to deploy...system from performing this mission lies in the AAW mission area and sustained independent operation in littoral waters . The fictional capability gap

  6. An assessment system for the system safety engineering capability maturity model in the case of spent fuel reprocessing

    International Nuclear Information System (INIS)

    Yang Xiaohua; Liu Zhenghai; Liu Zhiming; Wan Yaping; Bai Xiaofeng

    2012-01-01

    We can improve the processing, the evaluation of capability and promote the user's trust by using system security engineering capability maturity model (SSE-CMM). SSE-CMM is the common method for organizing and implementing safety engineering, and it is a mature method for system safety engineering. Combining capability maturity model (CMM) with total quality management and statistic theory, SSE-CMM turns systems security engineering into a well-defined, mature, measurable, advanced engineering discipline. Lack of domain knowledge, the size of data, the diversity of evidences, the cumbersomeness of processes, and the complexity of matching evidences with problems are the main issues that SSE-CMM assessment has to face. To improve effectively the efficiency of assessment of spent fuel reprocessing system security engineering capability maturity model (SFR-SSE-CMM), in this paper we de- signed an intelligent assessment software based on domain ontology and that uses methods such as ontology, evidence theory, semantic web, intelligent information retrieval and intelligent auto-matching techniques. This software includes four subsystems, which are domain ontology creation and management system, evidence auto collection system, and a problem and evidence matching system. The architecture of the software is divided into five layers: a data layer, an oncology layer, a knowledge layer, a service layer arid a presentation layer. (authors)

  7. Existing and Required Modeling Capabilities for Evaluating ATM Systems and Concepts

    Science.gov (United States)

    Odoni, Amedeo R.; Bowman, Jeremy; Delahaye, Daniel; Deyst, John J.; Feron, Eric; Hansman, R. John; Khan, Kashif; Kuchar, James K.; Pujet, Nicolas; Simpson, Robert W.

    1997-01-01

    ATM systems throughout the world are entering a period of major transition and change. The combination of important technological developments and of the globalization of the air transportation industry has necessitated a reexamination of some of the fundamental premises of existing Air Traffic Management (ATM) concepts. New ATM concepts have to be examined, concepts that may place more emphasis on: strategic traffic management; planning and control; partial decentralization of decision-making; and added reliance on the aircraft to carry out strategic ATM plans, with ground controllers confined primarily to a monitoring and supervisory role. 'Free Flight' is a case in point. In order to study, evaluate and validate such new concepts, the ATM community will have to rely heavily on models and computer-based tools/utilities, covering a wide range of issues and metrics related to safety, capacity and efficiency. The state of the art in such modeling support is adequate in some respects, but clearly deficient in others. It is the objective of this study to assist in: (1) assessing the strengths and weaknesses of existing fast-time models and tools for the study of ATM systems and concepts and (2) identifying and prioritizing the requirements for the development of additional modeling capabilities in the near future. A three-stage process has been followed to this purpose: 1. Through the analysis of two case studies involving future ATM system scenarios, as well as through expert assessment, modeling capabilities and supporting tools needed for testing and validating future ATM systems and concepts were identified and described. 2. Existing fast-time ATM models and support tools were reviewed and assessed with regard to the degree to which they offer the capabilities identified under Step 1. 3 . The findings of 1 and 2 were combined to draw conclusions about (1) the best capabilities currently existing, (2) the types of concept testing and validation that can be carried

  8. Status Report on Modelling and Simulation Capabilities for Nuclear-Renewable Hybrid Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rabiti, C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Epiney, A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Talbot, P. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kim, J. S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bragg-Sitton, S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Alfonsi, A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Yigitoglu, A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Greenwood, S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cetiner, S. M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ganda, F. [Argonne National Lab. (ANL), Argonne, IL (United States); Maronati, G. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-09-01

    This report summarizes the current status of the modeling and simulation capabilities developed for the economic assessment of Nuclear-Renewable Hybrid Energy Systems (N-R HES). The increasing penetration of variable renewables is altering the profile of the net demand, with which the other generators on the grid have to cope. N-R HES analyses are being conducted to determine the potential feasibility of mitigating the resultant volatility in the net electricity demand by adding industrial processes that utilize either thermal or electrical energy as stabilizing loads. This coordination of energy generators and users is proposed to mitigate the increase in electricity cost and cost volatility through the production of a saleable commodity. Overall, the financial performance of a system that is comprised of peaking units (i.e. gas turbine), baseload supply (i.e. nuclear power plant), and an industrial process (e.g. hydrogen plant) should be optimized under the constraint of satisfying an electricity demand profile with a certain level of variable renewable (wind) penetration. The optimization should entail both the sizing of the components/subsystems that comprise the system and the optimal dispatch strategy (output at any given moment in time from the different subsystems). Some of the capabilities here described have been reported separately in [1, 2, 3]. The purpose of this report is to provide an update on the improvement and extension of those capabilities and to illustrate their integrated application in the economic assessment of N-R HES.

  9. NifH and NifD phylogenies: an evolutionary basis for understanding nitrogen fixation capabilities of methanotrophic bacteria.

    Science.gov (United States)

    Dedysh, Svetlana N; Ricke, Peter; Liesack, Werner

    2004-05-01

    with regard to nitrogen acquisition. This interpretation is corroborated by the observation that, in contrast to most other diazotrophs, M. acidiphila B2 and Beijerinckia spp. are capable of active growth on nitrogen-free media under fully aerobic conditions.

  10. A Guide to Understanding Data Remanence in Automated Information Systems

    National Research Council Canada - National Science Library

    1991-01-01

    The purpose of A Guide to Understanding Data Remanence in Automated Information Systems is to provide information to personnel responsible for the secure handling of sensitive automated information system (AIS...

  11. Fault Injection and Monitoring Capability for a Fault-Tolerant Distributed Computation System

    Science.gov (United States)

    Torres-Pomales, Wilfredo; Yates, Amy M.; Malekpour, Mahyar R.

    2010-01-01

    The Configurable Fault-Injection and Monitoring System (CFIMS) is intended for the experimental characterization of effects caused by a variety of adverse conditions on a distributed computation system running flight control applications. A product of research collaboration between NASA Langley Research Center and Old Dominion University, the CFIMS is the main research tool for generating actual fault response data with which to develop and validate analytical performance models and design methodologies for the mitigation of fault effects in distributed flight control systems. Rather than a fixed design solution, the CFIMS is a flexible system that enables the systematic exploration of the problem space and can be adapted to meet the evolving needs of the research. The CFIMS has the capabilities of system-under-test (SUT) functional stimulus generation, fault injection and state monitoring, all of which are supported by a configuration capability for setting up the system as desired for a particular experiment. This report summarizes the work accomplished so far in the development of the CFIMS concept and documents the first design realization.

  12. DaVinci canvas: a telerobotic surgical system with integrated, robot-assisted, laparoscopic ultrasound capability.

    Science.gov (United States)

    Leven, Joshua; Burschka, Darius; Kumar, Rajesh; Zhang, Gary; Blumenkranz, Steve; Dai, Xiangtian Donald; Awad, Mike; Hager, Gregory D; Marohn, Mike; Choti, Mike; Hasser, Chris; Taylor, Russell H

    2005-01-01

    We present daVinci Canvas: a telerobotic surgical system with integrated robot-assisted laparoscopic ultrasound capability. DaVinci Canvas consists of the integration of a rigid laparoscopic ultrasound probe with the daVinci robot, video tracking of ultrasound probe motions, endoscope and ultrasound calibration and registration, autonomous robot motions, and the display of registered 2D and 3D ultrasound images. Although we used laparoscopic liver cancer surgery as a focusing application, our broader aim was the development of a versatile system that would be useful for many procedures.

  13. User's guide for the PWR LOCA analysis capability of the WRAP-EM system

    Energy Technology Data Exchange (ETDEWEB)

    Beranek, F; Gregory, M V

    1980-02-01

    The Water Reactor Analysis Package (WRAP) has been expanded to provide the capability to analyze loss-of-coolant accidents (LOCAs) in both pressurized water reactors (PWRs) and boiling water reactors (BWRs) by using evaluation models (EMs). The input specifications for modules in the WRAP-EM system are presented in this document along with the JOSHUA input templates. This document, along with the WRAP user's guide, provides a step-by-step procedure for setting up a PWR data base for the WRAP-EM system. 12 refs.

  14. Understanding the sediment routing system along the Gulf of ...

    Indian Academy of Sciences (India)

    Understanding the sediment routing system along the Gulf of Kachchh coast, western India: Significance of small ephemeral rivers ... is an attempt towards understanding the sediment routing system in the semi-arid margin of the Gulf of Kachchh, which is one of the largest macrotidal regimes in the northern Arabian Sea.

  15. Understanding Digital Learning from the Perspective of Systems Dynamics

    Science.gov (United States)

    Kok, Ayse

    2009-01-01

    The System Dynamics approach can be seen as a new way of understanding dynamical phenonema (natural, physical, biological, etc.) that occur in our daily lives taking into consideration not only single pairs of cause-effect variables, but the functioning of the system as a whole. This approach also provides the students with a new understanding in…

  16. CAPABILITIES AND ACTORS IN ERP SYSTEMS MANAGEMENT: AN EXPLORATORY STUDY IN CORPORATE USERS OF SAP ERP

    Directory of Open Access Journals (Sweden)

    Ronaldo Zwicker

    2007-10-01

    Full Text Available ERP systems are now an important component of information technology architecture in most large and medium sized companies. As such, it is inevitable that the activities undertaken to align this component to business requirements, conduct its evolution and ensure its performance and availability become increasingly important to companies’ IT areas. Success of these activities relies upon knowledge and participation of various actors inside and outside the IT area, imposing challenges not observed in internally developed systems. This paper proposes a model for the analysis of ERP systems management based on a previous work on the subject with the inclusion of the IT capabilities model and a description of the actors (stakeholders involved in the process of using an ERP system in a company. The proposed model is the basis for an exploratory survey conducted with 85 Brazilian companies whose results also comprise this text. The results suggest that only part of the capabilities is present and only part of the actors effectively participates on the ERP systems management effort.

  17. Efficient Power-Transfer Capability Analysis of the TET System Using the Equivalent Small Parameter Method.

    Science.gov (United States)

    Yanzhen Wu; Hu, A P; Budgett, D; Malpas, S C; Dissanayake, T

    2011-06-01

    Transcutaneous energy transfer (TET) enables the transfer of power across the skin without direct electrical connection. It is a mechanism for powering implantable devices for the lifetime of a patient. For maximum power transfer, it is essential that TET systems be resonant on both the primary and secondary sides, which requires considerable design effort. Consequently, a strong need exists for an efficient method to aid the design process. This paper presents an analytical technique appropriate to analyze complex TET systems. The system's steady-state solution in closed form with sufficient accuracy is obtained by employing the proposed equivalent small parameter method. It is shown that power-transfer capability can be correctly predicted without tedious iterative simulations or practical measurements. Furthermore, for TET systems utilizing a current-fed push-pull soft switching resonant converter, it is found that the maximum energy transfer does not occur when the primary and secondary resonant tanks are "tuned" to the nominal resonant frequency. An optimal turning point exists, corresponding to the system's maximum power-transfer capability when optimal tuning capacitors are applied.

  18. Overview of the ITER EC H and CD system and its capabilities

    International Nuclear Information System (INIS)

    Omori, T.; Henderson, M.A.; Albajar, F.; Alberti, S.; Baruah, U.; Bigelow, T.S.; Beckett, B.; Bertizzolo, R.; Bonicelli, T.; Bruschi, A.; Caughman, J.B.; Chavan, R.; Cirant, S.; Collazos, A.; Cox, D.; Darbos, C.; Baar, M.R. de; Denisov, G.; Farina, D.; Gandini, F.

    2011-01-01

    The Electron Cyclotron (EC) system for the ITER tokamak is designed to inject ≥20 MW RF power into the plasma for Heating and Current Drive (H and CD) applications. The EC system consists of up to 26 gyrotrons (between 1 and 2 MW each), the associated power supplies, 24 transmission lines and 5 launchers. The EC system has a diverse range of applications including central heating and current drive, current profile tailoring and control of plasma magneto-hydrodynamic (MHD) instabilities such as the sawtooth and neoclassical tearing modes (NTMs). This diverse range of applications requires the launchers to be capable of depositing the EC power across nearly the entire plasma cross section. This is achieved by two types of antennas: an equatorial port launcher (capable of injecting up to 20 MW from the plasma axis to mid-radius) and four upper port launchers providing access from inside of mid radius to near the plasma edge. The equatorial launcher design is optimized for central heating, current drive and profile tailoring, while the upper launcher should provide a very focused and peaked current density profile to control the plasma instabilities. The overall EC system has been modified during the past 3 years taking into account the issues identified in the ITER design review from 2007 and 2008 as well as integrating new technologies. This paper will review the principal objectives of the EC system, modifications made during the past 2 years and how the design is compliant with the principal objectives.

  19. SSE software test management STM capability: Using STM in the Ground Systems Development Environment (GSDE)

    Science.gov (United States)

    Church, Victor E.; Long, D.; Hartenstein, Ray; Perez-Davila, Alfredo

    1992-01-01

    This report is one of a series discussing configuration management (CM) topics for Space Station ground systems software development. It provides a description of the Software Support Environment (SSE)-developed Software Test Management (STM) capability, and discusses the possible use of this capability for management of developed software during testing performed on target platforms. This is intended to supplement the formal documentation of STM provided by the SEE Project. How STM can be used to integrate contractor CM and formal CM for software before delivery to operations is described. STM provides a level of control that is flexible enough to support integration and debugging, but sufficiently rigorous to insure the integrity of the testing process.

  20. Technical and economic assessment of fluidized-bed-augmented compressed-air energy-storage system: system load following capability

    Energy Technology Data Exchange (ETDEWEB)

    Lessard, R.D.; Blecher, W.A.; Merrick, D.

    1981-09-01

    The load-following capability of fluidized bed combustion-augmented compressed air energy storage systems was evaluated. The results are presented in two parts. The first part is an Executive Summary which provides a concise overview of all major elements of the study including the conclusions, and, second, a detailed technical report describing the part-load and load following capability of both the pressurized fluid bed combustor and the entire pressurized fluid bed combustor/compressed air energy storage system. The specific tasks in this investigation were to: define the steady-state, part-load operation of the CAES open-bed PFBC; estimate the steady-state, part-load performance of the PFBC/CAES system and evaluate any possible operational constraints; simulate the performance of the PFBC/CAES system during transient operation and assess the load following capability of the system; and establish a start-up procedure for the open-bed PFBC and evaluate the impact of this procedure. The conclusions are encouraging and indicate that the open-bed PFBC/CAES power plant should provide good part-load and transient performance, and should have no major equipment-related constraints, specifically, no major problems associated with the performance or design of either the open-end PFBC or the PFBC/CAES power plant in steady-state, part-load operation are envisioned. The open-bed PFBC/CAES power plant would have a load following capability which would be responsive to electric utility requirements for a peak-load power plant. The open-bed PFBC could be brought to full operating conditions within 15 min after routine shutdown, by employing a hot-start mode of operation. The PFBC/CAES system would be capable of rapid changes in output power (12% of design load per minute) over a wide output power range (25% to 100% of design output). (LCL)

  1. A bio-inspired real-time capable artificial lateral line system for freestream flow measurements.

    Science.gov (United States)

    Abels, C; Qualtieri, A; De Vittorio, M; Megill, W M; Rizzi, F

    2016-06-03

    To enhance today's artificial flow sensing capabilities in aerial and underwater robotics, future robots could be equipped with a large number of miniaturized sensors distributed over the surface to provide high resolution measurement of the surrounding fluid flow. In this work we show a linear array of closely separated bio-inspired micro-electro-mechanical flow sensors whose sensing mechanism is based on a piezoresistive strain-gauge along a stress-driven cantilever beam, mimicking the biological superficial neuromasts found in the lateral line organ of fishes. Aiming to improve state-of-the-art flow sensing capability in autonomously flying and swimming robots, our artificial lateral line system was designed and developed to feature multi-parameter freestream flow measurements which provide information about (1) local flow velocities as measured by the signal amplitudes from the individual cantilevers as well as (2) propagation velocity, (3) linear forward/backward direction along the cantilever beam orientation and (4) periodicity of pulses or pulse trains determined by cross-correlating sensor signals. A real-time capable cross-correlation procedure was developed which makes it possible to extract freestream flow direction and velocity information from flow fluctuations. The computed flow velocities deviate from a commercial system by 0.09 m s(-1) at 0.5 m s(-1) and 0.15 m s(-1) at 1.0 m s(-1) flow velocity for a sampling rate of 240 Hz and a sensor distance of 38 mm. Although experiments were performed in air, the presented flow sensing system can be applied to underwater vehicles as well, once the sensors are embedded in a waterproof micro-electro-mechanical systems package.

  2. MPSA: integrated system for multiple protein sequence analysis with client/server capabilities.

    Science.gov (United States)

    Blanchet, C; Combet, C; Geourjon, C; Deléage, G

    2000-03-01

    MPSA is a stand-alone software intended to protein sequence analysis with a high integration level and Web clients/server capabilities. It provides many methods and tools, which are integrated into an interactive graphical user interface. It is available for most Unix/Linux and non-Unix systems. MPSA is able to connect to a Web server (e.g. http://pbil.ibcp.fr/NPSA) in order to perform large-scale sequence comparison on up-to-date databanks. Free to academic http://www.ibcp.fr/mpsa/ c.blanchet@ibcp.fr

  3. Application of Transaction Cost Economics to Capabilities-Based Acquisition: Exploring Single Service vs. Joint Service Programs and Single Systems vs. System-of-Systems

    National Research Council Canada - National Science Library

    Angelis, Diana; Dillard, John; Franck, Raymond; Melese, Francois; Brown, Mary M; Flowe, Robert M

    2008-01-01

    The US Department of Defense (DoD) is in the process of radical transformation -- transformation to a national security strategy predicated on joint Service purchases and complex System-of-Systems (SoS) capabilities...

  4. Data Acquisition System Architecture and Capabilities at NASA GRC Plum Brook Station's Space Environment Test Facilities

    Science.gov (United States)

    Evans, Richard K.; Hill, Gerald M.

    2014-01-01

    Very large space environment test facilities present unique engineering challenges in the design of facility data systems. Data systems of this scale must be versatile enough to meet the wide range of data acquisition and measurement requirements from a diverse set of customers and test programs, but also must minimize design changes to maintain reliability and serviceability. This paper presents an overview of the common architecture and capabilities of the facility data acquisition systems available at two of the world's largest space environment test facilities located at the NASA Glenn Research Center's Plum Brook Station in Sandusky, Ohio; namely, the Space Propulsion Research Facility (commonly known as the B-2 facility) and the Space Power Facility (SPF). The common architecture of the data systems is presented along with details on system scalability and efficient measurement systems analysis and verification. The architecture highlights a modular design, which utilizes fully-remotely managed components, enabling the data systems to be highly configurable and support multiple test locations with a wide-range of measurement types and very large system channel counts.

  5. Engineering CRISPR/Cpf1 with tRNA promotes genome editing capability in mammalian systems.

    Science.gov (United States)

    Wu, Han; Liu, Qishuai; Shi, Hui; Xie, Jingke; Zhang, Quanjun; Ouyang, Zhen; Li, Nan; Yang, Yi; Liu, Zhaoming; Zhao, Yu; Lai, Chengdan; Ruan, Degong; Peng, Jiangyun; Ge, Weikai; Chen, Fangbing; Fan, Nana; Jin, Qin; Liang, Yanhui; Lan, Ting; Yang, Xiaoyu; Wang, Xiaoshan; Lei, Zhiyong; Doevendans, Pieter A; Sluijter, Joost P G; Wang, Kepin; Li, Xiaoping; Lai, Liangxue

    2018-04-10

    CRISPR/Cpf1 features a number of properties that are distinct from CRISPR/Cas9 and provides an excellent alternative to Cas9 for genome editing. To date, genome engineering by CRISPR/Cpf1 has been reported only in human cells and mouse embryos of mammalian systems and its efficiency is ultimately lower than that of Cas9 proteins from Streptococcus pyogenes. The application of CRISPR/Cpf1 for targeted mutagenesis in other animal models has not been successfully verified. In this study, we designed and optimized a guide RNA (gRNA) transcription system by inserting a transfer RNA precursor (pre-tRNA) sequence downstream of the gRNA for Cpf1, protecting gRNA from immediate digestion by 3'-to-5' exonucleases. Using this new gRNA tRNA system, genome editing, including indels, large fragment deletion and precise point mutation, was induced in mammalian systems, showing significantly higher efficiency than the original Cpf1-gRNA system. With this system, gene-modified rabbits and pigs were generated by embryo injection or somatic cell nuclear transfer (SCNT) with an efficiency comparable to that of the Cas9 gRNA system. These results demonstrated that this refined gRNA tRNA system can boost the targeting capability of CRISPR/Cpf1 toolkits.

  6. A new system for quantitative evaluation of infant gaze capabilities in a wide visual field.

    Science.gov (United States)

    Pratesi, Andrea; Cecchi, Francesca; Beani, Elena; Sgandurra, Giuseppina; Cioni, Giovanni; Laschi, Cecilia; Dario, Paolo

    2015-09-07

    The visual assessment of infants poses specific challenges: many techniques that are used on adults are based on the patient's response, and are not suitable for infants. Significant advances in the eye-tracking have made this assessment of infant visual capabilities easier, however, eye-tracking still requires the subject's collaboration, in most cases and thus limiting the application in infant research. Moreover, there is a lack of transferability to clinical practice, and thus it emerges the need for a new tool to measure the paradigms and explore the most common visual competences in a wide visual field. This work presents the design, development and preliminary testing of a new system for measuring infant's gaze in the wide visual field called CareToy C: CareToy for Clinics. The system is based on a commercial eye tracker (SmartEye) with six cameras running at 60 Hz, suitable for measuring an infant's gaze. In order to stimulate the infant visually and audibly, a mechanical structure has been designed to support five speakers and five screens at a specific distance (60 cm) and angle: one in the centre, two on the right-hand side and two on the left (at 30° and 60° respectively). Different tasks have been designed in order to evaluate the system capability to assess the infant's gaze movements during different conditions (such as gap, overlap or audio-visual paradigms). Nine healthy infants aged 4-10 months were assessed as they performed the visual tasks at random. We developed a system able to measure infant's gaze in a wide visual field covering a total visual range of ±60° from the centre with an intermediate evaluation at ±30°. Moreover, the same system, thanks to different integrated software, was able to provide different visual paradigms (as gap, overlap and audio-visual) assessing and comparing different visual and multisensory sub-competencies. The proposed system endowed the integration of a commercial eye-tracker into a purposive setup in

  7. Review of fluorescence guided surgery systems: identification of key performance capabilities beyond indocyanine green imaging

    Science.gov (United States)

    DSouza, Alisha V.; Lin, Huiyun; Henderson, Eric R.; Samkoe, Kimberley S.; Pogue, Brian W.

    2016-08-01

    There is growing interest in using fluorescence imaging instruments to guide surgery, and the leading options for open-field imaging are reviewed here. While the clinical fluorescence-guided surgery (FGS) field has been focused predominantly on indocyanine green (ICG) imaging, there is accelerated development of more specific molecular tracers. These agents should help advance new indications for which FGS presents a paradigm shift in how molecular information is provided for resection decisions. There has been a steady growth in commercially marketed FGS systems, each with their own differentiated performance characteristics and specifications. A set of desirable criteria is presented to guide the evaluation of instruments, including: (i) real-time overlay of white-light and fluorescence images, (ii) operation within ambient room lighting, (iii) nanomolar-level sensitivity, (iv) quantitative capabilities, (v) simultaneous multiple fluorophore imaging, and (vi) ergonomic utility for open surgery. In this review, United States Food and Drug Administration 510(k) cleared commercial systems and some leading premarket FGS research systems were evaluated to illustrate the continual increase in this performance feature base. Generally, the systems designed for ICG-only imaging have sufficient sensitivity to ICG, but a fraction of the other desired features listed above, with both lower sensitivity and dynamic range. In comparison, the emerging research systems targeted for use with molecular agents have unique capabilities that will be essential for successful clinical imaging studies with low-concentration agents or where superior rejection of ambient light is needed. There is no perfect imaging system, but the feature differences among them are important differentiators in their utility, as outlined in the data and tables here.

  8. Microcontroller-based Vehicle Security System with Tracking Capability using GSM and GPS Technologies

    Directory of Open Access Journals (Sweden)

    Engr. Orven F. Mendoza

    2017-05-01

    Full Text Available The security of vehicles is ext remely essential for vehicle owners especially to those whose hard - earned income was used to avail of one or simply, its loss would mean inconveniences to family and work. With these, it becomes the major problem of every vehicle owner. This thesis, Microc ontroller - based Vehicle Security System with Tracking Capability using GSM and GPS Technologies, is a system that can be used to increase vehicle security, as it can track location of missing vehicle, and help authorities have credible evidence that the ve hicle is stolen. The project uses the Global System for Mobile (GSM and the Global Positioning System (GPS technology, which includes the use of GPS receiver module, GSM module, and microcontroller as its primary components. It also uses a vibration sens or that senses vehicle movement and a buzzer that sends an alarm when sensors are triggered. A confirmation message is sent to the vehicle owner of the vehicle by the device. The system also features capability of tracking the location of the vehicle with the help of the GPS receiver which gives data to the location of the vehicle by way of coordinates. These coordinates provide exact location of the motor vehicle. The SMS message that the vehicle owner will send to the device attached to the vehicle should follow correct format of limitation for successful use and the use of the four character password followed by the command. The command is for power switching or activating automatically the key switch, engine and alarm. If not observed, the device would not work. The project is deemed to provide vehicle owners the security of their vehicle. The system will not only ensure vehicle security but also lessen the threats on vehicles.

  9. NASA's Space Launch System: A Transformative Capability for Deep Space Missions

    Science.gov (United States)

    Creech, Stephen D.

    2017-01-01

    Already making substantial progress toward its first launches, NASA’s Space Launch System (SLS) exploration-class launch vehicle presents game-changing new opportunities in spaceflight, enabling human exploration of deep space, as well as a variety of missions and mission profiles that are currently impossible. Today, the initial configuration of SLS, able to deliver more than 70 metric tons of payload to low Earth orbit (LEO), is well into final production and testing ahead of its planned first flight, which will send NASA’s new Orion crew vehicle around the moon and will deploy 13 CubeSats, representing multiple disciplines, into deep space. At the same time, production work is already underway toward the more-capable Block 1B configuration, planned to debut on the second flight of SLS, and capable of lofting 105 tons to LEO or of co-manifesting large exploration systems with Orion on launches to the lunar vicinity. Progress being made on the vehicle for that second flight includes initial welding of its core stage and testing of one of its engines, as well as development of new elements such as the powerful Exploration Upper Stage and the Universal Stage Adapter “payload bay.” Ultimately, SLS will evolve to a configuration capable of delivering more than 130 tons to LEO to support humans missions to Mars. In order to enable human deep-space exploration, SLS provides unrivaled mass, volume, and departure energy for payloads, offering numerous benefits for a variety of other missions. For robotic science probes to the outer solar system, for example, SLS can cut transit times to less than half that of currently available vehicles or substantially increased spacecraft mass. In the field of astrophysics, SLS’ high payload volume, in the form of payload fairings with a diameter of up to 10 meters, creates the opportunity for launch of large-aperture telescopes providing an unprecedented look at our universe. This presentation will give an overview of SLS

  10. How Information Visualization Systems Change Users' Understandings of Complex Data

    Science.gov (United States)

    Allendoerfer, Kenneth Robert

    2009-01-01

    User-centered evaluations of information systems often focus on the usability of the system rather its usefulness. This study examined how a using an interactive knowledge-domain visualization (KDV) system affected users' understanding of a domain. Interactive KDVs allow users to create graphical representations of domains that depict important…

  11. Role of pressuriser in enhancing pressure control system capability in primary system of 500 MWe PHWR

    International Nuclear Information System (INIS)

    Walia, M.P.S.; Misri, Vijay; Bapat, C.N.; Sharma, V.K.

    1994-01-01

    The primary heat transport system of a pressurized heavy water reactor (PHWR) extracts and transports the heat produced in the fuel (located inside coolant channel assemblies) to the steam generators where steam is generated to run the turbo-generator. The heat transport medium (primary coolant) is heavy water which is kept in a pressurized liquid state with the help of a pressure control system. Feed and bleed circuits with associated equipment of PHT main system have traditionally constituted the pressure control system. However, for large size reactors of 500 MWe capacity, a surge tank known as pressurizer was incorporated due to the presence of relatively large inventory in PHT main circuit. The pressurizer acts as a cushion for pressure variations resulting from various transients. This significantly reduces the onerous demand on feed and bleed system, thereby reducing reactor outages on system pressure excursions. The paper describes in detail the pressure control system of 500 MWe PHWR involving pressuriser and feed and bleed system including their functions and instrumentation. The results of mathematical modelling/analysis undertaken to establish the response adequacy of pressure control system, to postulated plant transients vis-a-vis the role of pressurizer are presented. (author)

  12. Pilot climate data system: A state-of-the-art capability in scientific data management

    Science.gov (United States)

    Smith, P. H.; Treinish, L. A.; Novak, L. V.

    1983-01-01

    The Pilot Climate Data System (PCDS) was developed by the Information Management Branch of NASA's Goddard Space Flight Center to manage a large collection of climate-related data of interest to the research community. The PCDS now provides uniform data catalogs, inventories, access methods, graphical displays and statistical calculations for selected NASA and non-NASA data sets. Data manipulation capabilities were developed to permit researchers to easily combine or compare data. The current capabilities of the PCDS include many tools for the statistical survey of climate data. A climate researcher can examine any data set of interest via flexible utilities to create a variety of two- and three-dimensional displays, including vector plots, scatter diagrams, histograms, contour plots, surface diagrams and pseudo-color images. The graphics and statistics subsystems employ an intermediate data storage format which is data-set independent. Outside of the graphics system there exist other utilities to select, filter, list, compress, and calculate time-averages and variances for any data of interest. The PCDS now fully supports approximately twenty different data sets and is being used on a trial basis by several different in-house research grounds.

  13. Analysis of helium purification system capability during water ingress accident in RDE

    Science.gov (United States)

    Sriyono; Kusmastuti, Rahayu; Bakhri, Syaiful; Sunaryo, Geni Rina

    2018-02-01

    The water ingress accident caused by steam generator tube rupture (SGTR) in RDE (Experimental Power Reactor) must be anticipated. During the accident, steam from secondary system diffused and mixed with helium gas in the primary coolant. To avoid graphite corrosion in the core, steam will be removed by Helium purification system (HPS). There are two trains in HPS, first train for normal operation and the second for the regeneration and accident. The second train is responsible to clean the coolant during accident condition. The second train is equipped with additional component, i.e. water cooler, post accident blower, and water separator to remove this mixture gas. During water ingress, the water release from rupture tube is mixed with helium gas. The water cooler acts as a steam condenser, where the steam will be separated by water separator from the helium gas. This paper analyses capability of HPS during water ingress accident. The goal of the research is to determine the time consumed by HPS to remove the total amount of water ingress. The method used is modelling and simulation of the HPS by using ChemCAD software. The BDBA and DBA scenarios will be simulated. In BDBA scenario, up to 110 kg of water is assumed to infiltrate to primary coolant while DBA is up to 35 kg. By using ChemCAD simulation, the second train will purify steam ingress maximum in 0.5 hours. The HPS of RDE has a capability to anticipate the water ingress accident.

  14. Systems Engineering of Unmanned DoD Systems: Following the Joint Capabilities Integration and Development System/Defense Acquisition System Process to Develop an Unmanned Ground Vehicle System

    Science.gov (United States)

    2015-12-01

    fail mission Component testing to ensure the arm is capable of carrying the vials Autonomous robot being able to complete the mission without...The system is ready for operation once the robot emits three consecutive beeps. In addition to movement and claw control, the OCU software allows...Relationship to the Acquisition Life-cycle.” http://hdl.handle.net/10945/33465. 136 The Industrial College of the Armed Forces. 2011. “ Robotics and

  15. Improved thermal source term generation capability for use in performance assessment and system studies

    International Nuclear Information System (INIS)

    King, J.; Rhodes, C.

    1994-01-01

    This paper describes work performed by the Civilian Radioactive Waste Management System (CRWMS) Management and Operating (M ampersand O) Contractor to improve spent nuclear fuel (SNF) waste stream characterization for system studies. It discusses how these new capabilities may be exploited for thermal source term generation for use in repository performance assessment modeling. SNF historical discharges have been exhaustively tracked, and significant effort has gone into capturing, verifying, and electronically managing spent fuel inventory data. Future discharge projections are produced annually by the Energy Information Administration (EIA) using sophisticated computer models. The output of these models is coupled with annually updated SNF historical discharges to produce what is referred to as the open-quotes reactor database.close quotes This database and related data are published in a variety of ways including on magnetic media for consistent use by analysts or other interested parties

  16. The revenue raising capabilities of a VAT system in developing countries

    Directory of Open Access Journals (Sweden)

    NT Azaria

    2015-01-01

    Full Text Available The paper attempts to elaborate on the revenue-raising capabilities (economic efficiency and viability of a value-added tax (VAT system, particularly in developing countries.  The analysis concentrates on the effect of a VAT on tax revenues raised, and the main objective is to determine whether a VAT system generates greater benefits than previously utilised sales taxes, i.e. pre-existing sales taxes (PEST. Using a panel data regression analysis, our results indicate that while all countries gain revenue from the presence of VAT, it is significantly more in developed countries, although the dummy VAT variable interacted with trace openness enters positively for the lower- and upper middle-income groups.  This proves the importance of trade for VAT revenues, but also that VAT combined with interaction variables is conducive to higher tax revenues.

  17. Arctic Observing Network (AON): Enhancing Observing, Data Archiving and Data Discovery Capabilities as Arctic Environmental System Change Continues

    Science.gov (United States)

    Jeffries, M. O.

    2008-12-01

    The National Science Foundation (NSF) and the National Oceanic and Atmospheric Administration, under the auspices of the U.S. Inter-Agency Arctic Research Policy Committee, are leading the development of the Arctic Observing Network (AON) as part of the implementation of the Study of Environmental Arctic Change (SEARCH) and as a legacy of International Polar Year (IPY). As the Observing Change component of SEARCH, AON complements the Understanding Change and Responding to Change components. AON addresses the need to enhance observing capabilities in a data-sparse region where environmental system changes are among the most rapid on Earth. AON data will contribute to research into understanding the causes and consequences of Arctic environmental system change and its global connections, and to improving predictive skill. AON is also a contribution to the development of a multi-nation, pan-Arctic observing network that is being discussed at the IPY 'Sustaining Arctic Observing Networks' (SAON) workshops. Enhancing Arctic observing capabilities faces many challenges, including coordination and integration of disparate observing elements and data systems that operate according to diverse policies and practices. There is wide agreement that data systems that provide archiving and discovery services are essential and integral to AON. In recognition of this, NSF is supporting the development of CADIS (Cooperative Arctic Data and Information Service) as an AON portal for data discovery, a repository for data storage, and a platform for data analysis. NSF is also supporting ELOKA (Exchange for Local Observations and Knowledge in the Arctic), a pilot project for a data management and networking service for community- based observing that keeps control of data in the hands of data providers while still allowing for broad searches and sharing of information. CADIS and ELOKA represent the application of cyberinfrastructure to meet AON data system needs that might also

  18. The commissioning of the advanced radiographic capability laser system: experimental and modeling results at the main laser output

    Science.gov (United States)

    Di Nicola, J. M.; Yang, S. T.; Boley, C. D.; Crane, J. K.; Heebner, J. E.; Spinka, T. M.; Arnold, P.; Barty, C. P. J.; Bowers, M. W.; Budge, T. S.; Christensen, K.; Dawson, J. W.; Erbert, G.; Feigenbaum, E.; Guss, G.; Haefner, C.; Hermann, M. R.; Homoelle, D.; Jarboe, J. A.; Lawson, J. K.; Lowe-Webb, R.; McCandless, K.; McHale, B.; Pelz, L. J.; Pham, P. P.; Prantil, M. A.; Rehak, M. L.; Rever, M. A.; Rushford, M. C.; Sacks, R. A.; Shaw, M.; Smauley, D.; Smith, L. K.; Speck, R.; Tietbohl, G.; Wegner, P. J.; Widmayer, C.

    2015-02-01

    The National Ignition Facility (NIF) at Lawrence Livermore National Laboratory is the first of a kind megajoule-class laser with 192 beams capable of delivering over 1.8 MJ and 500TW of 351nm light [1], [2]. It has been commissioned and operated since 2009 to support a wide range of missions including the study of inertial confinement fusion, high energy density physics, material science, and laboratory astrophysics. In order to advance our understanding, and enable short-pulse multi-frame radiographic experiments of dense cores of cold material, the generation of very hard x-rays above 50 keV is necessary. X-rays with such characteristics can be efficiently generated with high intensity laser pulses above 1017 W/cm² [3]. The Advanced Radiographic Capability (ARC) [4] which is currently being commissioned on the NIF will provide eight, 1 ps to 50 ps, adjustable pulses with up to 1.7 kJ each to create x-ray point sources enabling dynamic, multi-frame x-ray backlighting. This paper will provide an overview of the ARC system and report on the laser performance tests conducted with a stretched-pulse up to the main laser output and their comparison with the results of our laser propagation codes.

  19. A Comprehensive Evaluation System for Military Hospitals' Response Capability to Bio-terrorism.

    Science.gov (United States)

    Wang, Hui; Jiang, Nan; Shao, Sicong; Zheng, Tao; Sun, Jianzhong

    2015-05-01

    The objective of this study is to establish a comprehensive evaluation system for military hospitals' response capacity to bio-terrorism. Literature research and Delphi method were utilized to establish the comprehensive evaluation system for military hospitals' response capacity to bio-terrorism. Questionnaires were designed and used to survey the status quo of 134 military hospitals' response capability to bio-terrorism. Survey indicated that factor analysis method was suitable to for analyzing the comprehensive evaluation system for military hospitals' response capacity to bio-terrorism. The constructed evaluation system was consisted of five first-class and 16 second-class indexes. Among them, medical response factor was considered as the most important factor with weight coefficient of 0.660, followed in turn by the emergency management factor with weight coefficient of 0.109, emergency management consciousness factor with weight coefficient of 0.093, hardware support factor with weight coefficient of 0.078, and improvement factor with weight coefficient of 0.059. The constructed comprehensive assessment model and system are scientific and practical.

  20. Relay protection coordination with generator capability curve, excitation system limiters and power system relay protections settings

    Directory of Open Access Journals (Sweden)

    Buha Danilo

    2016-01-01

    Full Text Available The relay protection settings performed in the largest thermal powerplant (TE "Nikola Tesla B" are reffered and explained in this paper. The first calculation step is related to the coordination of the maximum stator current limiter settings, the overcurrent protection with inverse characteristics settings and the permitted overload of the generator stator B1. In the second calculation step the settings of impedance generator protection are determined, and the methods and criteria according to which the calculations are done are described. Criteria used to provide the protection to fulfill the backup protection role in the event of malfunction of the main protection of the transmission system. are clarified. The calculation of all protection functions (32 functions of generator B1 were performed in the project "Coordination of relay protection blocks B1 and B2 with the system of excitation and power system protections -TENT B".

  1. Land and Atmosphere Near-Real-Time Capability for Earth Observing System

    Science.gov (United States)

    Murphy, Kevin J.

    2011-01-01

    LANCE (Land, Atmosphere Near-Real-Time Capability for EOS) in 2009. LANCE consists of special processing elements, co-located with selected EOSDIS data centers and processing facilities. A primary goal of LANCE is to bring multiple near-real-time systems under one umbrella, offering commonality in data access, quality control, and latency. LANCE now processes and distributes data from the Moderate Resolution Imaging Spectroradiometer (MODIS), Atmospheric Infrared Sounder (AIRS), Advanced Microwave Scanning Radiometer Earth Observing System (AMSR-E), Microwave Limb Sounder (MLS) and Ozone Monitoring Instrument (OMI) instruments within 3 hours of satellite observation. The Rapid Response System and the Fire Information for Resource Management System (FIRMS) capabilities will be incorporated into LANCE in 2011. LANCE maintains a central website to facilitate easy access to data and user services. LANCE products are extensively tested and compared with science products before being made available to users. Each element also plans to implement redundant network, power and server infrastructure to ensure high availability of data and services. Through the user registration system, users are informed of any data outages and when new products or services will be available for access. Building on a significant investment by NASA in developing science algorithms and products, LANCE creates products that have a demonstrated utility for applications requiring near-real-time data. From lower level data products such as calibrated geolocated radiances to higher-level products such as sea ice extent, snow cover, and cloud cover, users have integrated LANCE data into forecast models and decision support systems. The table above shows the current near-real-time product categories by instrument. The ESDIS Project continues to improve the LANCE system and use the experience gained through practice to seek adjustments to improve the quality and performance of the system. For example, an

  2. Learning and Understanding System Stability Using Illustrative Dynamic Texture Examples

    Science.gov (United States)

    Liu, Huaping; Xiao, Wei; Zhao, Hongyan; Sun, Fuchun

    2014-01-01

    System stability is a basic concept in courses on dynamic system analysis and control for undergraduate students with computer science backgrounds. Typically, this was taught using a simple simulation example of an inverted pendulum. Unfortunately, many difficult issues arise in the learning and understanding of the concepts of stability,…

  3. A System-of-Systems Engineering Approach for Australian Land Force Capability Integration

    Science.gov (United States)

    2012-09-01

    Shelf NCW Network Centric Warfare NCWIIS NCW Integration and Implementation Strategy NDIA National Defense Industrial Association OCD Operational...individual rather than via the systemic approach offered by SoSE. The success of this approach is critically dependent upon the energy and presence of the...Success Factors in SoS Engineering SoSE Personnel 27. It is necessary to identify and manage critical workforce competencies. It is also essential to

  4. SCORPIO-VVER core monitoring and surveillance system with advanced capabilities

    International Nuclear Information System (INIS)

    Molnar, J.; Vocka, R.

    2009-01-01

    The SCORPIO-VVER system includes following features: 1) Validation of plant measurements and identification of sensor failures. 2) Optimum combination of measurements and calculations to obtain precise values of important parameters. 3) On-line 3D power distribution calculation with pin power reconstruction. 4) Limit checking and thermal margin calculation allowing for surveillance of VVER core limits such as DNBR, Sub-cooling margin, FdH and FQ peeking factors. 5) Integrated modules for monitoring fuel performance and coolant activity for identification of fuel failures. 6) Predictive capabilities and strategy planning, offering the possibility to check the consequences of operational manoeuvres in advance, prediction of critical parameters, etc. 7) Convenient monitoring of approach to criticality during reactor start-up. 8) Automated transition between cycles (fuel reload). The SCORPIO-VVER core monitoring system with its flexible and modular framework successfully responses to the plant operating needs and advances in nuclear fuel cycle strategies and fuel design. Modular framework allows for easy modifications of the system and implementation of new methods in physical modules. Even if the system is installed only on VVER-440 reactors, it could be adapted for VVER-1000 needs

  5. Understanding information retrieval systems management, types, and standards

    CERN Document Server

    Bates, Marcia J

    2011-01-01

    In order to be effective for their users, information retrieval (IR) systems should be adapted to the specific needs of particular environments. The huge and growing array of types of information retrieval systems in use today is on display in Understanding Information Retrieval Systems: Management, Types, and Standards, which addresses over 20 types of IR systems. These various system types, in turn, present both technical and management challenges, which are also addressed in this volume. In order to be interoperable in a networked environment, IR systems must be able to use various types of

  6. NOAA's Joint Polar Satellite System's Proving Ground and Risk Reduction Program - Bringing New Capabilities to Operations!

    Science.gov (United States)

    Sjoberg, B.

    2015-12-01

    This presentation will focus on the NOAA Joint Polar Satellite System (JPSS) Program's Proving Ground and Risk Reduction (PGRR) initiative and how it has prepared NOAA users to effectively utilize new polar-orbiting capabilities. The PGRR Program was established in 2012, following the launch of the Suomi National Polar Partnership (SNPP) satellite. Two sets of PGRR Projects have been established grouped together in thirteen different initiatives. Details about how these projects have been continually tailored through the years to meet user requirements, will be highlighted. The presenter will focus on how the success of the first set of PGRR projects have been used to evaluate a follow-on set of projects and focus on exactly what the JPSS user community needs to meet their mission requirements. Details on the Dec 2014 PGRR Call-for-Proposals and the projects selected for funding will be discussed.

  7. LDRD final report : a lightweight operating system for multi-core capability class supercomputers.

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, Suzanne Marie; Hudson, Trammell B. (OS Research); Ferreira, Kurt Brian; Bridges, Patrick G. (University of New Mexico); Pedretti, Kevin Thomas Tauke; Levenhagen, Michael J.; Brightwell, Ronald Brian

    2010-09-01

    The two primary objectives of this LDRD project were to create a lightweight kernel (LWK) operating system(OS) designed to take maximum advantage of multi-core processors, and to leverage the virtualization capabilities in modern multi-core processors to create a more flexible and adaptable LWK environment. The most significant technical accomplishments of this project were the development of the Kitten lightweight kernel, the co-development of the SMARTMAP intra-node memory mapping technique, and the development and demonstration of a scalable virtualization environment for HPC. Each of these topics is presented in this report by the inclusion of a published or submitted research paper. The results of this project are being leveraged by several ongoing and new research projects.

  8. NGNP Data Management and Analysis System Analysis and Web Delivery Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Cynthia D. Gentillon

    2010-09-01

    Projects for the Very High Temperature Reactor Technology Development Office provide data in support of Nuclear Regulatory Commission licensing of the very high temperature reactor. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high-temperature and high-fluence environments. In addition, thermal-hydraulic experiments are conducted to validate codes used to assess reactor safety. The Very High Temperature Reactor Technology Development Office has established the NGNP Data Management and Analysis System (NDMAS) at the Idaho National Laboratory to ensure that very high temperature reactor data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the third NDMAS objective. It describes capabilities for displaying the data in meaningful ways and for data analysis to identify useful relationships among the measured quantities.

  9. The Coastal Ocean Prediction Systems program: Understanding and managing our coastal ocean

    International Nuclear Information System (INIS)

    Eden, H.F.; Mooers, C.N.K.

    1990-06-01

    The goal of COPS is to couple a program of regular observations to numerical models, through techniques of data assimilation, in order to provide a predictive capability for the US coastal ocean including the Great Lakes, estuaries, and the entire Exclusive Economic Zone (EEZ). The objectives of the program include: determining the predictability of the coastal ocean and the processes that govern the predictability; developing efficient prediction systems for the coastal ocean based on the assimilation of real-time observations into numerical models; and coupling the predictive systems for the physical behavior of the coastal ocean to predictive systems for biological, chemical, and geological processes to achieve an interdisciplinary capability. COPS will provide the basis for effective monitoring and prediction of coastal ocean conditions by optimizing the use of increased scientific understanding, improved observations, advanced computer models, and computer graphics to make the best possible estimates of sea level, currents, temperatures, salinities, and other properties of entire coastal regions

  10. Understanding Patterns for System-of-Systems Integration

    DEFF Research Database (Denmark)

    Kazman, Rick; Nielsen, Claus Ballegård; Schmid, Klaus

    and interoperation among systems through some form of system integration. Previous work has approached the information system integration challenge in a generic way, not specific to a SoS context, or has provided only a limited range of solutions. This technical report discusses how an IT architect can address...... the SoS integration challenge from an architectural perspective; it also illustrates the breadth of potential solutions to the challenge through a categorization of SoS soft-ware architectural patterns. To demonstrate the practical relevance of this work, the authors instantiate this categorization...

  11. An EEG-Based Person Authentication System with Open-Set Capability Combining Eye Blinking Signals

    Directory of Open Access Journals (Sweden)

    Qunjian Wu

    2018-01-01

    Full Text Available The electroencephalogram (EEG signal represents a subject’s specific brain activity patterns and is considered as an ideal biometric given its superior forgery prevention. However, the accuracy and stability of the current EEG-based person authentication systems are still unsatisfactory in practical application. In this paper, a multi-task EEG-based person authentication system combining eye blinking is proposed, which can achieve high precision and robustness. Firstly, we design a novel EEG-based biometric evoked paradigm using self- or non-self-face rapid serial visual presentation (RSVP. The designed paradigm could obtain a distinct and stable biometric trait from EEG with a lower time cost. Secondly, the event-related potential (ERP features and morphological features are extracted from EEG signals and eye blinking signals, respectively. Thirdly, convolutional neural network and back propagation neural network are severally designed to gain the score estimation of EEG features and eye blinking features. Finally, a score fusion technology based on least square method is proposed to get the final estimation score. The performance of multi-task authentication system is improved significantly compared to the system using EEG only, with an increasing average accuracy from 92.4% to 97.6%. Moreover, open-set authentication tests for additional imposters and permanence tests for users are conducted to simulate the practical scenarios, which have never been employed in previous EEG-based person authentication systems. A mean false accepted rate (FAR of 3.90% and a mean false rejected rate (FRR of 3.87% are accomplished in open-set authentication tests and permanence tests, respectively, which illustrate the open-set authentication and permanence capability of our systems.

  12. Research on capability of detecting ballistic missile by near space infrared system

    Science.gov (United States)

    Lu, Li; Sheng, Wen; Jiang, Wei; Jiang, Feng

    2018-01-01

    The infrared detection technology of ballistic missile based on near space platform can effectively make up the shortcomings of high-cost of traditional early warning satellites and the limited earth curvature of ground-based early warning radar. In terms of target detection capability, aiming at the problem that the formula of the action distance based on contrast performance ignores the background emissivity in the calculation process and the formula is only valid for the monochromatic light, an improved formula of the detecting range based on contrast performance is proposed. The near space infrared imaging system parameters are introduced, the expression of the contrastive action distance formula based on the target detection of the near space platform is deduced. The detection range of the near space infrared system for the booster stage ballistic missile skin, the tail nozzle and the tail flame is calculated. The simulation results show that the near-space infrared system has the best effect on the detection of tail-flame radiation.

  13. Hybrid Intelligent Control Method to Improve the Frequency Support Capability of Wind Energy Conversion Systems

    Directory of Open Access Journals (Sweden)

    Shin Young Heo

    2015-10-01

    Full Text Available This paper presents a hybrid intelligent control method that enables frequency support control for permanent magnet synchronous generators (PMSGs wind turbines. The proposed method for a wind energy conversion system (WECS is designed to have PMSG modeling and full-scale back-to-back insulated-gate bipolar transistor (IGBT converters comprising the machine and grid side. The controller of the machine side converter (MSC and the grid side converter (GSC are designed to achieve maximum power point tracking (MPPT based on an improved hill climb searching (IHCS control algorithm and de-loaded (DL operation to obtain a power margin. Along with this comprehensive control of maximum power tracking mode based on the IHCS, a method for kinetic energy (KE discharge control of the supporting primary frequency control scheme with DL operation is developed to regulate the short-term frequency response and maintain reliable operation of the power system. The effectiveness of the hybrid intelligent control method is verified by a numerical simulation in PSCAD/EMTDC. Simulation results show that the proposed approach can improve the frequency regulation capability in the power system.

  14. National Research Council Dialogue to Assess Progress on NASA's Systems Engineering Cost/Risk Analysis Capability Roadmap Development: General Background and Introduction

    Science.gov (United States)

    Regenie, Victoria

    2005-01-01

    Contents include the following: General Background and Introduction of Capability. Roadmaps for Systems Engineering Cost/Risk Analysis. Agency Objectives. Strategic Planning Transformation. Review Capability Roadmaps and Schedule. Review Purpose of NRC Review. Capability Roadmap Development (Progress to Date).

  15. Institutional pressures, dynamic capabilities and environmental management systems: investigating the ISO 9000--environmental management system implementation linkage.

    Science.gov (United States)

    Zhu, Qinghua; Cordeiro, James; Sarkis, Joseph

    2013-01-15

    We hypothesize a model where domestic and international institutional pressures lead to the successful implementation of ISO 9000 and can in turn lead to the successful implementation of environmental management systems such as ISO 14001 environmental certification systems or total quality environmental management (TQEM) systems. Using appropriate tests for mediation with dichotomous mediators and outcomes, we find that the model holds for a sample of 377 Chinese manufacturers in six major industrial groups in Suzhou, Dalian, and Tianjin. Our findings are consistent with the theory linking internal capabilities to heterogeneous external (in this case, institutional) pressures on organizations for environmentally proactive efforts. Our findings suggest that institutions in developing countries with significant environmental concerns such as China as well as foreign suppliers and partners to firms in these countries should encourage and support ISO 9000 implementations by local firms. These findings may influence other developing nations' adoption of quality and environmental process systems. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Understanding complex urban systems multidisciplinary approaches to modeling

    CERN Document Server

    Gurr, Jens; Schmidt, J

    2014-01-01

    Understanding Complex Urban Systems takes as its point of departure the insight that the challenges of global urbanization and the complexity of urban systems cannot be understood – let alone ‘managed’ – by sectoral and disciplinary approaches alone. But while there has recently been significant progress in broadening and refining the methodologies for the quantitative modeling of complex urban systems, in deepening the theoretical understanding of cities as complex systems, or in illuminating the implications for urban planning, there is still a lack of well-founded conceptual thinking on the methodological foundations and the strategies of modeling urban complexity across the disciplines. Bringing together experts from the fields of urban and spatial planning, ecology, urban geography, real estate analysis, organizational cybernetics, stochastic optimization, and literary studies, as well as specialists in various systems approaches and in transdisciplinary methodologies of urban analysis, the volum...

  17. Applications of RFID technology in dismounted soldier solution systems – study of mCOP system capabilities

    Directory of Open Access Journals (Sweden)

    Chmielewski Mariusz

    2016-01-01

    Full Text Available This paper discusses application of RFID technology in Dismounted Soldier Solutions gathered from the development and demonstration of mCOP platform. The software has been developed to elaborate Network Enabled Capabilities in tactical environments. Presented research was a part of demonstration prepared for the European Defence Agency. The main aim of the tool is the delivery of command support capabilities utilizing data fusion and integration mechanisms implemented in heterogeneous military mobile networks. Application of military integration standards such as JC3IEDM, NFFI and TSO supports interoperability with BMS class systems. Utilisation of RFID technology in mCOP software has several purposes, mainly used for process automation of authorisation and personal identification. Indirectly such functionalities can be used for implementation of UAV supported - Blue Force Tracking and IFF services. This research elaborates a set of implemented ideas for such solutions. Developed system serves as a multi-level and multi-platform command and control system supporting military and crisis operations. A crucial part of the system - mCOP, the handheld application for tactical level commanders, serves as personal toolkit for location monitoring and combat situation distribution and management. The tool delivers a set of tailored functionalities supporting commander’s situation awareness and decision making process. The mCOP hosting device equipped with RFID delivers also means of tactical , emergency, micro network communication.

  18. Capabilities and Choices: Do They Make Sen'se for Understanding Objective and Subjective Well-Being? An Empirical Test of Sen's Capability Framework on German and British Panel Data

    Science.gov (United States)

    Muffels, Ruud; Headey, Bruce

    2013-01-01

    In Sen's Capability Approach (CA) well-being can be defined as the freedom of choice to achieve the things in life which one has reason to value most for his or her personal life. Capabilities are in Sen's vocabulary therefore the real freedoms people have or the opportunities available to them. In this paper we examine the impact of capabilities…

  19. Creation of an Upper Stage Trajectory Capability Boundary to Enable Booster System Trade Space Exploration

    Science.gov (United States)

    Walsh, Ptrick; Coulon, Adam; Edwards, Stephen; Mavris, Dimitri N.

    2012-01-01

    The problem of trajectory optimization is important in all space missions. The solution of this problem enables one to specify the optimum thrust steering program which should be followed to achieve a specified mission objective, simultaneously satisfying the constraints.1 It is well known that whether or not the ascent trajectory is optimal can have a significant impact on propellant usage for a given payload, or on payload weight for the same gross vehicle weight.2 Consequently, ascent guidance commands are usually optimized in some fashion. Multi-stage vehicles add complexity to this analysis process as changes in vehicle properties in one stage propagate to the other stages through gear ratios and changes in the optimal trajectory. These effects can cause an increase in analysis time as more variables are added and convergence of the optimizer to system closure requires more analysis iterations. In this paper, an approach to simplifying this multi-stage problem through the creation of an upper stage capability boundary is presented. This work was completed as part of a larger study focused on trade space exploration for the advanced booster system that will eventually form a part of NASA s new Space Launch System.3 The approach developed leverages Design of Experiments and Surrogate Modeling4 techniques to create a predictive model of the SLS upper stage performance. The design of the SLS core stages is considered fixed for the purposes of this study, which results in trajectory parameters such as staging conditions being the only variables relevant to the upper stage. Through the creation of a surrogate model, which takes staging conditions as inputs and predicts the payload mass delivered by the SLS upper stage to a reference orbit as the response, it is possible to identify a "surface" of staging conditions which all satisfy the SLS requirement of placing 130 metric tons into low-Earth orbit (LEO).3 This identified surface represents the 130 metric ton

  20. Experimental evaluation of penetration capabilities of a Geiger-mode APD array laser radar system

    Science.gov (United States)

    Jonsson, Per; Tulldahl, Michael; Hedborg, Julia; Henriksson, Markus; Sjöqvist, Lars

    2017-10-01

    Laser radar 3D imaging has the potential to improve target recognition in many scenarios. One case that is challenging for most optical sensors is to recognize targets hidden in vegetation or behind camouflage. The range resolution of timeof- flight 3D sensors allows segmentation of obscuration and target if the surfaces are separated far enough so that they can be resolved as two distances. Systems based on time-correlated single-photon counting (TCSPC) have the potential to resolve surfaces closer to each other compared to laser radar systems based on proportional mode detection technologies and is therefore especially interesting. Photon counting detection is commonly performed with Geigermode Avalanche Photodiodes (GmAPD) that have the disadvantage that they can only detect one photon per laser pulse per pixel. A strong return from an obscuring object may saturate the detector and thus limit the possibility to detect the hidden target even if photons from the target reach the detector. The operational range where good foliage penetration is observed is therefore relatively narrow for GmAPD systems. In this paper we investigate the penetration capability through semi-transparent surfaces for a laser radar with a 128×32 pixel GmAPD array and a 1542 nm wavelength laser operating at a pulse repetition frequency of 90 kHz. In the evaluation a screen was placed behind different canvases with varying transmissions and the detected signals from the surfaces for different laser intensities were measured. The maximum return from the second surface occurs when the total detection probability is around 0.65-0.75 per pulse. At higher laser excitation power the signal from the second surface decreases. To optimize the foliage penetration capability it is thus necessary to adaptively control the laser power to keep the returned signal within this region. In addition to the experimental results, simulations to study the influence of the pulse energy on penetration through

  1. Capability Paternalism

    NARCIS (Netherlands)

    Claassen, R.J.G.

    A capability approach prescribes paternalist government actions to the extent that it requires the promotion of specific functionings, instead of the corresponding capabilities. Capability theorists have argued that their theories do not have much of these paternalist implications, since promoting

  2. Acute Care Referral Systems in Liberia: Transfer and Referral Capabilities in a Low-Income Country.

    Science.gov (United States)

    Kim, Jimin; Barreix, Maria; Babcock, Christine; Bills, Corey B

    2017-12-01

    referral exist and could serve as the basis for a more robust system. Well-integrated acute care referral systems in low-income countries, like Liberia, may help to mitigate future public health crises by augmenting a country's capacity for emergency preparedness. Kim J , Barreix M , Babcock C , Bills CB . Acute care referral systems in Liberia: transfer and referral capabilities in a low-income country. Prehosp Disaster Med. 2017;32(6):642-650.

  3. Variable high-resolution color CCD camera system with online capability for professional photo studio application

    Science.gov (United States)

    Breitfelder, Stefan; Reichel, Frank R.; Gaertner, Ernst; Hacker, Erich J.; Cappellaro, Markus; Rudolf, Peter; Voelk, Ute

    1998-04-01

    Digital cameras are of increasing significance for professional applications in photo studios where fashion, portrait, product and catalog photographs or advertising photos of high quality have to be taken. The eyelike is a digital camera system which has been developed for such applications. It is capable of working online with high frame rates and images of full sensor size and it provides a resolution that can be varied between 2048 by 2048 and 6144 by 6144 pixel at a RGB color depth of 12 Bit per channel with an also variable exposure time of 1/60s to 1s. With an exposure time of 100 ms digitization takes approx. 2 seconds for an image of 2048 by 2048 pixels (12 Mbyte), 8 seconds for the image of 4096 by 4096 pixels (48 Mbyte) and 40 seconds for the image of 6144 by 6144 pixels (108 MByte). The eyelike can be used in various configurations. Used as a camera body most commercial lenses can be connected to the camera via existing lens adaptors. On the other hand the eyelike can be used as a back to most commercial 4' by 5' view cameras. This paper describes the eyelike camera concept with the essential system components. The article finishes with a description of the software, which is needed to bring the high quality of the camera to the user.

  4. Shape Understanding System – Knowledge Implementation and Learning

    CERN Document Server

    Les, Zbigniew

    2013-01-01

    This book presents the selected results of research on the further development of the shape understanding system (SUS) described in our previous book titled “Shape Understanding System: the First Steps Toward the Visual Thinking Machines”. This is the second book that presents the results of research in the area of thinking and understanding carried out by authors in the newly founded the Queen Jadwiga Research Institute of Understanding. In this book, the new term knowledge implementation is introduced to denote the new method of the meaningful learning in the context of machine understanding. SUS ability to understand is related to the different categories of objects such as the category of visual objects, the category of sensory objects and the category of text objects. In this book, new terms and concepts are introduced in order to describe and explain some issues connected with SUS development. These terms are explained by referring to the content of our books and other our works rather than to exist...

  5. The dE/dx capabilities of the D0 tracking system

    International Nuclear Information System (INIS)

    Rajagopalan, S.

    1992-06-01

    The D0 forward tracking system has been extensively calibrated using electron and pion beams in the energy range from 10 GeV to 150 GeV in the neutrino area fixed target beam line at Fermilab. The forward tracking system provides a spatial resolution of 200 μm and a two hit separation of 2.5 mm at 90% efficiency. The chamber provides 32 samples of pulse height information for a given track equivalent to a dE/dx resolution of 12.7%. The energy loss response of the chamber to low energy-beam has been studied. A Monte Carlo simulation program has been developed based on the Photo Absorption Ionization model to simulate the dE/dx response of the chamber. The observations made using low energy test beam are consistent with the model's predictions. The dE/dx measurement in the D0 tracking system provides identification of electrons against gamma conversions resulting from π 0 decays. The rejection factor of distinguishing doubly minimum ionizing tracks in the chamber has been measured to be 30.5 with the requirement that singly minimum ionizing tracks be identified with a 90% efficiency. This factor improves with lower multiplicity. Using a Monte Carlo program based on GEANT, the identification efficiency of electrons and π 0 's has been determined. Using the capabilities of the outer tracking system alone, the background due to isolated π 0 production is reduced by up to a factor of 60 in the central direction based on measurements made on a sample of simulated QCD two jet events

  6. Advanced Unsteady Turbulent Combustion Simulation Capability for Space Propulsion Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation proposed here is a high performance, high fidelity simulation capability to enable accurate, fast and robust simulation of unsteady turbulent,...

  7. Calibration Performance and Capabilities of the New Compact Ocean Wind Vector Radiometer System

    Science.gov (United States)

    Brown, S. T.; Focardi, P.; Kitiyakara, A.; Maiwald, F.; Montes, O.; Padmanabhan, S.; Redick, R.; Russell, D.; Wincentsen, J.

    2014-12-01

    The paper describes performance and capabilities of a new satellite conically imaging microwave radiometer system, the Compact Ocean Wind Vector Radiometer (COWVR), being built by the Jet Propulsion Laboratory (JPL) for an Air Force demonstration mission. COWVR is an 18-34 GHz fully polarimetric radiometer designed to provide measurements of ocean vector winds with an accuracy that meets or exceeds that provided by WindSat, but using a simpler design which has both calibration and cost advantages. Heritage conical radiometer systems, such as WindSat, AMSR, GMI or SSMI(S), all have a similar overall architecture and have exhibited significant intra-channel and inter-sensor calibration biases, due in part to the relative independence of the radiometers between the different polarizations and frequencies in the system. The COWVR system uses a broadband compact hybrid combining architecture and Electronic Polarization Basis Rotation to minimize the number of free calibration parameters between polarization and frequencies, as well as providing a definitive calibration reference from the modulation of the mean polarized signal from the Earth. This second calibration advantage arises because the sensor modulates the incoming polarized signal at the input antenna aperture in a known way based only on the instrument geometry which forces relative calibration consistency between the polarimetric channels of the sensor and provides a gain and offset calibration independent of a model or other ancillary data source, which has typically been a weakness in the calibration and inter-calibration of heritage microwave sensors. This paper will give a description of the COWVR instrument and an overview of the technology demonstration mission. We will discuss the overall calibration approach for this system, its advantages over existing systems and how many of the calibration issues that impact existing satellite radiometers can be eliminated in future operational systems based on

  8. Towards a systems understanding of plant-microbe interactions

    Directory of Open Access Journals (Sweden)

    Akira eMine

    2014-08-01

    Full Text Available Plants are closely associated with microorganisms including pathogens and mutualists that influence plant fitness. Molecular genetic approaches have uncovered a number of signaling components from both plants and microbes and their mode of actions. However, signaling pathways are highly interconnected and influenced by diverse sets of environmental factors. Therefore, it is important to have systems views in order to understand the true nature of plant-microbe interactions. Indeed, systems biology approaches have revealed previously overlooked or misinterpreted properties of the plant immune signaling network. Experimental reconstruction of biological networks using exhaustive combinatorial mutants is particularly powerful to elucidate network structure and properties and relationships among network components. Recent advances in metagenomics of microbial communities associated with plants further point to the importance of systems approaches and open a research area of microbial community reconstruction. In this review, we highlight the importance of a systems understanding of plant-microbe interactions, with a special emphasis on reconstruction strategies.

  9. Scaffolding students' understanding of force in pulley systems

    Science.gov (United States)

    Rouinfar, Amy; Madsen, Adrian M.; Hoang, Tram Do Ngoc; Puntambekar, Sadhana; Rebello, N. Sanjay

    2013-01-01

    Recent research results have found that students using virtual manipulatives perform as well or better on measures of conceptual understanding than their peers who used physical equipment. We report on a study with students in a conceptual physics laboratory using either physical or virtual manipulatives to investigate forces in pulley systems. Written materials guided students through a sequence of activities designed to scaffold their understanding of force in pulley systems. The activity sequences facilitated students' sense making by requiring them to make and test predictions about various pulley systems by building and comparing different systems. We investigate the ways in which students discuss force while navigating the scaffolding activities and how these discussions compare between the physical and virtual treatments.

  10. Monitoring water distribution systems: understanding and managing sensor networks

    Directory of Open Access Journals (Sweden)

    D. D. Ediriweera

    2010-09-01

    Full Text Available Sensor networks are currently being trialed by the water distribution industry for monitoring complex distribution infrastructure. The paper presents an investigation in to the architecture and performance of a sensor system deployed for monitoring such a distribution network. The study reveals lapses in systems design and management, resulting in a fifth of the data being either missing or erroneous. Findings identify the importance of undertaking in-depth consideration of all aspects of a large sensor system with access to either expertise on every detail, or to reference manuals capable of transferring the knowledge to non-specialists. First steps towards defining a set of such guidelines are presented here, with supporting evidence.

  11. A program to enhance nursing managers' capability of operating computerized processing system.

    Science.gov (United States)

    Lin, Hui-Min; Han, Chiu-Ping; Fang, Hui-Mei; Lee, Kuei-Yin; Lin, Mei-Pei

    2006-01-01

    The purpose of this program is to improve the capacities of head nurses of operating hospital information system, relevant operation of the Intranet, electronic forms, and computerized processing system through nursing information educational courses and hands-on operation. The results of questionnaires show that head nurses score averagely 4.05 on the knowledge of computerized processing system in the hospital and 3.6, the lowest, on those of schedule arrangement of nursing personnel, cashier, and accounting operation. In addition, the knowledge of the Intranet operation scored averagely 4.28 and 3.8 on the operation of electronic forms and equipment maintenance and repairing request. After collecting, analyzing, compiling information and comparing to literature review, the researchers conclude the solutions as: (1) conducting nursing information training courses to improve knowledge of head nurses on relevant computerized processing system; (2) monitoring and evaluating nursing administration to promote heads-on evaluation operation for furthering understanding of individual operation problem. After the implementation of above proposed program, head nurses score 4.99 on the knowledge of hospital information and operation of relevant intranet system and demonstrate 88% of satisfaction level indicating the importance of conducting nursing information training courses to effectively improve computer operation capacity, work efficiency, and satisfaction level.

  12. Capabilities and Choices: Do They Make Sen'se for Understanding Objective and Subjective Well-Being? An Empirical Test of Sen's Capability Framework on German and British Panel Data.

    Science.gov (United States)

    Muffels, Ruud; Headey, Bruce

    2013-02-01

    In Sen's Capability Approach (CA) well-being can be defined as the freedom of choice to achieve the things in life which one has reason to value most for his or her personal life. Capabilities are in Sen's vocabulary therefore the real freedoms people have or the opportunities available to them. In this paper we examine the impact of capabilities alongside choices on well-being. There is a lot of theoretical work on Sen's capability framework but still a lack of empirical research in measuring and testing his capability model especially in a dynamic perspective. The contribution of the paper is first to test Sen's theoretical CA approach empirically using 25 years of German and 18 years of British data. Second, to examine to what extent the capability approach can explain long-term changes in well-being and third to view the impact on subjective as well as objective well-being in two clearly distinct welfare states. Three measures of well-being are constructed: life satisfaction for subjective well-being and relative income and employment security for objective well-being. We ran random and fixed effects GLS models. The findings strongly support Sen's capabilities framework and provide evidence on the way capabilities, choices and constraints matter for objective and subjective well-being. Capabilities pertaining to human capital, trust, altruism and risk taking, and choices to family, work-leisure, lifestyle and social behaviour show to strongly affect long-term changes in subjective and objective well-being though in a different way largely depending on the type of well-being measure used.

  13. A read-out system for the Medipix2 chip capable of 500 frames per second

    Energy Technology Data Exchange (ETDEWEB)

    Maiorino, M. [IFAE Institut de Fisica d' Altes Energies, UAB Campus, 08193 Barcelona (Spain)]. E-mail: maiorino@ifae.es; Martinez, R. [Centro Nacional de Microelectronica, IMB-CNM-CSIC, UAB Campus, 08193 Barcelona (Spain); Pellegrini, G. [Centro Nacional de Microelectronica, IMB-CNM-CSIC, UAB Campus, 08193 Barcelona (Spain); Blanchot, G. [IFAE Institut de Fisica d' Altes Energies, UAB Campus, 08193 Barcelona (Spain); Chmeissani, M. [IFAE Institut de Fisica d' Altes Energies, UAB Campus, 08193 Barcelona (Spain); Garcia, J. [IFAE Institut de Fisica d' Altes Energies, UAB Campus, 08193 Barcelona (Spain); Lozano, M. [Centro Nacional de Microelectronica, IMB-CNM-CSIC, UAB Campus, 08193 Barcelona (Spain); Puigdengoles, C. [IFAE Institut de Fisica d' Altes Energies, UAB Campus, 08193 Barcelona (Spain); Ullan, M. [Centro Nacional de Microelectronica, IMB-CNM-CSIC, UAB Campus, 08193 Barcelona (Spain)

    2006-07-01

    High-speed X-ray-imaging acquisition technique is a growing field that can be used to understand microscopic mechanism of different phenomena in biology and material science. IFAE and CNM developed a very high-speed readout system, named DEMAS, for the Medipix2. The system is able to read a single Medipix2 chip through the parallel bus at a rate of 1 kHz.With a duty cycle of 50%, the real sampling speed is 500 frames per second (fps). This implies that 1 ms is allocated to the exposure time and another millisecond is devoted to the read-out of the chip. In such configuration, the raw data throughput is about 500 Mbit/s. For the first time we present examples of acquisition at 500 fps of moving samples with X-rays working in direct capture and photon counting mode.

  14. Database management systems understanding and applying database technology

    CERN Document Server

    Gorman, Michael M

    1991-01-01

    Database Management Systems: Understanding and Applying Database Technology focuses on the processes, methodologies, techniques, and approaches involved in database management systems (DBMSs).The book first takes a look at ANSI database standards and DBMS applications and components. Discussion focus on application components and DBMS components, implementing the dynamic relationship application, problems and benefits of dynamic relationship DBMSs, nature of a dynamic relationship application, ANSI/NDL, and DBMS standards. The manuscript then ponders on logical database, interrogation, and phy

  15. Development of an Effective System Identification and Control Capability for Quad-copter UAVs

    Science.gov (United States)

    Wei, Wei

    In recent years, with the promise of extensive commercial applications, the popularity of Unmanned Aerial Vehicles (UAVs) has dramatically increased as witnessed by publications and mushrooming research and educational programs. Over the years, multi-copter aircraft have been chosen as a viable configuration for small-scale VTOL UAVs in the form of quad-copters, hexa-copters and octo-copters. Compared to the single main rotor configuration such as the conventional helicopter, multi-copter airframes require a simpler feedback control system and fewer mechanical parts. These characteristics make these UAV platforms, such as quad-copter which is the main emphasis in this dissertation, a rugged and competitive candidate for many applications in both military and civil areas. Because of its configuration and relative size, the small-scale quad-copter UAV system is inherently very unstable. In order to develop an effective control system through simulation techniques, obtaining an accurate dynamic model of a given quad-copter is imperative. Moreover, given the anticipated stringent safety requirements, fault tolerance will be a crucial component of UAV certification. Accurate dynamic modeling and control of this class of UAV is an enabling technology and is imperative for future commercial applications. In this work, the dynamic model of a quad-copter system in hover flight was identified using frequency-domain system identification techniques. A new and unique experimental system, data acquisition and processing procedure was developed catering specifically to the class of electric powered multi-copter UAV systems. The Comprehensive Identification from FrEquency Responses (CIFER RTM) software package, developed by US Army Aviation Development Directorate -- AFDD, was utilized along with flight tests to develop dynamic models of the quad-copter system. A new set of flight tests were conducted and the predictive capability of the dynamic models were successfully validated

  16. Addressing ageing of the workforce issues by enabling knowledge management systems with social networks analysis capabilities

    International Nuclear Information System (INIS)

    Perisic, I.

    2004-01-01

    Full text: A method of addressing ageing of the workforce and knowledge transfer issues, especially in the area of potential loss of knowledge, is presented through the integration of social networks analysis capabilities within knowledge management systems. In the context of the ageing of the workforce, a key component is the identification of not only the individuals that are about to retire, but also the knowledge and the knowledge transfer capabilities that they will take with them they do so. This loss impacts decisions made about human resources 'supply side' programs such as education, but also programs for building 'communities of practices' within the IAEA community to foster development and research across regions and countries. Within this context, an integrated social network analysis component provides the ability to map out the network of knowledge on any specific topic. The stability of the network itself is a measure of the robustness of the knowledge within the selected IAEA community. Further, the network, by identifying 'brokers' and 'bridges', pinpoints key weaknesses that have to be addressed. In the case of ageing of the workforce, balancing, stabilizing and building redundancies within this social network is key to maintaining a safe nuclear policy. The core of the method relies on a system that has a holistic view of the body of knowledge accumulated within the IAEA community. For scalability issues, this system cannot replicate the plethora of potential sources of information, but rather has to harvest from each of them a set of metadata which in turn enables the knowledge management system. This metadata is defined and stored in a way to allow the rendering of a complete picture stored within the sub-systems. A key component used by the social network analysis component is, of course, the name of all individuals tied to any knowledge object within the database, but also their affiliation, country, seniority or 'age to retirement' (when

  17. Understanding complex systems: lessons from Auzoux's and von ...

    Indian Academy of Sciences (India)

    2009-12-09

    Dec 9, 2009 ... Animal and human anatomy is among the most complex systems known, and suitable teaching methods have been of great importance in the progress of knowledge. Examining the human body is part of the process by which medical students come to understand living forms. However, the need to ...

  18. Metabolic modeling to understand and redesign microbial systems

    NARCIS (Netherlands)

    Heck, van Ruben G.A.

    2017-01-01

    The goals of this thesis are to increase the understanding of microbial metabolism and to functionally (re-)design microbial systems using Genome- Scale Metabolic models (GSMs). GSMs are species-specific knowledge repositories that can be used to predict metabolic activities for wildtype and

  19. Virtual Solar System Project: Building Understanding through Model Building.

    Science.gov (United States)

    Barab, Sasha A.; Hay, Kenneth E.; Barnett, Michael; Keating, Thomas

    2000-01-01

    Describes an introductory astronomy course for undergraduate students in which students use three-dimensional (3-D) modeling tools to model the solar system and develop rich understandings of astronomical phenomena. Indicates that 3-D modeling can be used effectively in regular undergraduate university courses as a tool to develop understandings…

  20. Understanding Learner Agency as a Complex Dynamic System

    Science.gov (United States)

    Mercer, Sarah

    2011-01-01

    This paper attempts to contribute to a fuller understanding of the nature of language learner agency by considering it as a complex dynamic system. The purpose of the study was to explore detailed situated data to examine to what extent it is feasible to view learner agency through the lens of complexity theory. Data were generated through a…

  1. Contribution to the meaning and understanding of anticipatory systems

    Science.gov (United States)

    Kljajić, Miroljub

    2001-06-01

    The present article discusses the cybernetic method in the modelling and understanding of complex systems from the epistemological, semantic as well as psychological point of view. Biological and organisational systems are the most important among complex systems. According to Rosen [1] anticipatory systems is another name for complex systems because, in a way, they function to anticipate the future state in order to preserve its structure and functioning. This paper demonstrates a strong analogy between Rosen's modified definition of anticipatory systems [2] and decision-making through simulation in organisational systems. The possible meaning of several models modified in the anticipatory mode will also be discussed as for example: a) The modified Verhaulst Model and its anticipatory modification in the case of the description of human behavior, b) The Prey-Predator Model, and c) The Evans Market Model under different conditions of the demand and supply function.

  2. Dynamic systems for everyone understanding how our world works

    CERN Document Server

    Ghosh, Asish

    2015-01-01

    This book is a study of the interactions between different types of systems, their environment, and their subsystems.  The author explains how basic systems principles are applied in engineered (mechanical, electromechanical, etc.) systems and then guides the reader to understand how the same principles can be applied to social, political, economic systems, as well as in everyday life.  Readers from a variety of disciplines will benefit from the understanding of system behaviors and will be able to apply those principles in various contexts.  The book includes many examples covering various types of systems.  The treatment of the subject is non-mathematical, and the book considers some of the latest concepts in the systems discipline, such as agent-based systems, optimization, and discrete events and procedures.  ·         Shows how system knowledge may be applied in many different areas without the need for deep mathematical knowledge; ·         Demonstrates how to model and simulate s...

  3. Addressing ageing of the workforce issues by enabling knowledge management systems with social networks analysis capabilities

    International Nuclear Information System (INIS)

    Perisic, I.

    2004-01-01

    Full text: A method of addressing ageing of the workforce and knowledge transfer issues, especially in the area of potential loss of knowledge, is presented through the integration of social networks analysis capabilities within knowledge management systems. In the context of the ageing of the workforce, a key component is the identification of not only the individuals that are about to retire, but also the knowledge and the knowledge transfer capabilities that they will take with them they do so. This loss impacts decisions made about human resources 'supply side' programs such as education, but also programs for building 'communities of practices' within the IAEA community to foster development and research across regions and countries. Within this context, an integrated social network analysis component provides the ability to map out the network of knowledge on any specific topic. The stability of the network itself is a measure of the robustness of the knowledge within the selected IAEA community. Further, the network, by identifying 'brokers' and 'bridges', pinpoints key weaknesses that have to be addressed. In the case of ageing of the workforce, balancing, stabilizing and building redundancies within this social network is key to maintaining a safe nuclear policy. The core of the method relies on a system that has a holistic view of the body of knowledge accumulated within the IAEA community. For scalability issues, this system cannot replicate the plethora of potential sources of information, but rather has to harvest from each of them a set of metadata which in turn enables the knowledge management system. This metadata is defined and stored in a way to allow the rendering of a complete picture stored within the subsystems. A key component used by the social network analysis component is, of course, the name of all individuals tied to any knowledge object within the database, but also their affiliation, country, seniority or 'age to retirement' (when

  4. Seismic Monitoring Capabilities of the Caribbean and Adjacent Regions Tsunami Warning System

    Science.gov (United States)

    Saurel, Jean-Marie; von Hillebrandt-Andrade, Christa; Crespo, Hector; McNamara, Dan; Huerfano, Victor

    2014-05-01

    Over 75 tsunamis have been documented in the Caribbean and Adjacent Regions during the past 500 years. Since 1500, at least 4484 people are reported to have perished in these killer waves. Hundreds of thousands are currently threatened along the Caribbean coastlines. In 2005 the Intergovernmental Coordination Group for the Tsunami and other Coastal Hazards Warning System for the Caribbean and Adjacent Regions (CARIBE EWS) was established. It recommended the following minimum seismic performance standards for the detection and analysis of earthquakes: 1) Earthquake detection within 1 minute, 2) Minimum magnitude threshold = M4.5, and 3) Initial hypocenter error of data availability of the contributing stations at the US Tsunami Warning Centers, the Puerto Rico Seismic Network and IRIS. As of early 2014, 99 of the proposed stations are being contributed by national, regional and international seismological institutions. Recent network additions (Nicaragua, Colombia, Mexico, Cayman Islands, and Venezuela) have reduced detection threshold, time and location error throughout much of the Caribbean region and Central America. Specifically, earthquakes (>M4.0) can be detected within 1 minute throughout much of the Caribbean. The remaining exceptions to this standard for detection are portions of northern South America and Mexico. Another performance criterion is 90% data availability. Currently 60-70% of the stations meet this standard. The presentation will further report on the status of the CARIBE EWS seismic capability for the timely and accurate detection and analysis of earthquakes for tsunami warning purposes for the Caribbean and Adjacent Regions.

  5. A digital receiver with fast frequency- and gain-switching capabilities for MRI systems.

    Science.gov (United States)

    Ruipeng, Ning; Yidong, Dai; Guang, Yang; Gengying, Li

    2009-12-01

    In this article, two issues pertaining to MRI digital receivers are addressed. One is the maintenance of phase coherence between the transmitter and the receiver-an effective solution is proposed, in which the receiver frequency is switched synchronously with the transmitter frequency. The other is the dynamic range of the receiver-gain-switching technique is utilized to improve the dynamic range. To meet the hardware requirements of these solutions, a digital receiver with fast frequency- and gain-switching capabilities was implemented. The primary components of the proposed digital receiver are a variable gain amplifier, a high-speed analog-to-digital converter and a single-chip digital receiver core. The radio-frequency magnetic resonance signal is directly sampled by the analog-to-digital converter and processed in the digital receiver core. By pre-storing the receiver waveform in the on-board SDRAM, the frequency and gain of the receiver may be switched very quickly. The performance of the proposed digital receiver is verified by embedding it in an imaging spectrometer. It is then demonstrated by conducting experiments on a home-built 0.3-T magnetic resonance imaging system. The results show that the phase coherence between the transmitter and the receiver and the dynamic range of the receiver are greatly improved. Consequently, the proposed digital receiver may be useful for obtaining multiple-slice two-dimensional magnetic resonance images with very high resolution.

  6. Understanding energy technology developments from an innovation system perspective

    Energy Technology Data Exchange (ETDEWEB)

    Borup, M.; Nygaard Madsen, A. [Risoe National Lab., DTU, Systems Analysis Dept., Roskilde (Denmark); Gregersen, Birgitte [Aalborg Univ., Department of Business Studies (Denmark)

    2007-05-15

    With the increased market-orientation and privatisation of the energy area, the perspective of innovation is becoming more and more relevant for understanding the dynamics of change and technology development in the area. A better understanding of the systemic and complex processes of innovation is needed. This paper presents an innovation systems analysis of new and emerging energy technologies in Denmark. The study focuses on five technology areas: bio fuels, hydrogen technology, wind energy, solar cells and energy-efficient end-use technologies. The main result of the analysis is that the technology areas are quite diverse in a number of innovation-relevant issues like actor set-up, institutional structure, maturity, and connections between market and non-market aspects. The paper constitutes background for discussing the framework conditions for transition to sustainable energy technologies and strengths and weaknesses of the innovation systems. (au)

  7. Understanding complex urban systems integrating multidisciplinary data in urban models

    CERN Document Server

    Gebetsroither-Geringer, Ernst; Atun, Funda; Werner, Liss

    2016-01-01

    This book is devoted to the modeling and understanding of complex urban systems. This second volume of Understanding Complex Urban Systems focuses on the challenges of the modeling tools, concerning, e.g., the quality and quantity of data and the selection of an appropriate modeling approach. It is meant to support urban decision-makers—including municipal politicians, spatial planners, and citizen groups—in choosing an appropriate modeling approach for their particular modeling requirements. The contributors to this volume are from different disciplines, but all share the same goal: optimizing the representation of complex urban systems. They present and discuss a variety of approaches for dealing with data-availability problems and finding appropriate modeling approaches—and not only in terms of computer modeling. The selection of articles featured in this volume reflect a broad variety of new and established modeling approaches such as: - An argument for using Big Data methods in conjunction with Age...

  8. Enhancing the seismic capability of the on-power refueling system of the CANDU reactor

    International Nuclear Information System (INIS)

    Banwatt, A.S.; Lee, T.C.K.; May, J.H.

    1998-01-01

    The CANDU reactor assembly includes several hundred horizontal fuel channels, each containing twelve fuel bundles, arranged in a square lattice, and supported by the reactor structures. CANDU operates on natural uranium or other low fissile content fuel, and is refueled on-power, with either four or eight fuel bundles in a channel being replaced during each refueling operation. The fueling machines clamp onto the opposite ends of the fuel channel to be refueled. The seismic capacity of this refueling system is evaluated in terms of its dynamic response during an earthquake. This paper describes the approach adopted to enhance the seismic capability of the fueling machine and calandria assembly for earthquakes of O.3g ground acceleration covering a broad range of soil conditions ranging from soft to hard. A detailed, 3-D finite element seismic model of the fueling machine and calandria assembly system is developed to calculate the seismic responses of the structure. Some relatively simple hardware design changes have been considered to increase the seismic capacity of the CANDU 6 reactor. These changes in the fueling machine and calandria assembly of the CANDU 6 reactor are briefly described. They have been incorporated into the finite element seismic model of the system. Most of these design changes have already been considered and implemented in other CANDU reactor projects. The current CANDU 6 reactor design fully meets the requirements of seismic qualification for sites with potential for O.2g ground acceleration where the seismic loads need to be combined with the other design loads for the support and pressure boundary components to demonstrate compliance with the applicable Code requirements. In the present study it is demonstrated that, with relatively simple hardware changes, the fueling machine and calandria assembly of the CANDU 6 reactor can withstand earthquakes of O.3g ground acceleration. Based on the current study and some preliminary analysis of the

  9. Final Report: Connecting genomic capabilities to physiology and response: Systems biology of the widespread alga Micromonas

    Energy Technology Data Exchange (ETDEWEB)

    Worden, Alexandra Z. [Monterey Bay Aquarium Research Institute (MBARI), Moss Landing, CA (United States); Callister, Stephen [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stuart, Joshua [Univ. of California, Santa Cruz, CA (United States); Smith, Richard [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-09-30

    Increased stratification, less mixing and reduced nutrient concentrations in marine surface waters are predicted under a number of climate-change scenarios. These conditions are considered favorable for tiny photosynthetic algae (picophytoplankton), shaping their role in mediating future CO2 conditions. One possibility is that picophytoplankton such as Micromonas that have broad geographical ranges will more successfully adapt to changing environmental conditions. However, their capacity to thrive under the multi-factorial impacts of low pH, low nutrients, increasing temperature and changes in community composition is not known. Here, we developed the dual-Micromonas model system, which entailed generating optimized genomic information for two Micromonas species and developing a highperformance chemostat system in which both CO2 and nutrients could be consistently manipulated. This system is now fully operational. Project results are available in several publications will others are still in the analysis phase. Overall, our results show that Micromonas primary production will likely decrease under predicted future climate conditions. Furthermore, our studies on Micromonas provide new insights to the land plant ancestor, including the discovery of conserved signaling mechanisms (known to be essential to plant development) as well as the discovery of widespread chemical-sensing molecular switches. Collectively, this research highlights Micromonas as an important new model green alga for understanding plant gene networks and evolution as well as for investigating perturbation effects on marine primary production.

  10. Understanding earth system models: how Global Sensitivity Analysis can help

    Science.gov (United States)

    Pianosi, Francesca; Wagener, Thorsten

    2017-04-01

    Computer models are an essential element of earth system sciences, underpinning our understanding of systems functioning and influencing the planning and management of socio-economic-environmental systems. Even when these models represent a relatively low number of physical processes and variables, earth system models can exhibit a complicated behaviour because of the high level of interactions between their simulated variables. As the level of these interactions increases, we quickly lose the ability to anticipate and interpret the model's behaviour and hence the opportunity to check whether the model gives the right response for the right reasons. Moreover, even if internally consistent, an earth system model will always produce uncertain predictions because it is often forced by uncertain inputs (due to measurement errors, pre-processing uncertainties, scarcity of measurements, etc.). Lack of transparency about the scope of validity, limitations and the main sources of uncertainty of earth system models can be a strong limitation to their effective use for both scientific and decision-making purposes. Global Sensitivity Analysis (GSA) is a set of statistical analysis techniques to investigate the complex behaviour of earth system models in a structured, transparent and comprehensive way. In this presentation, we will use a range of examples across earth system sciences (with a focus on hydrology) to demonstrate how GSA is a fundamental element in advancing the construction and use of earth system models, including: verifying the consistency of the model's behaviour with our conceptual understanding of the system functioning; identifying the main sources of output uncertainty so to focus efforts for uncertainty reduction; finding tipping points in forcing inputs that, if crossed, would bring the system to specific conditions we want to avoid.

  11. Highly Capable Micropump-fed Propulsion System for Proximity Operations, Landing and Ascent, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Flight Works is proposing to expand its work in micro-gear-pumps for propulsion applications in order to provide a highly capable propulsion and attitude control...

  12. Highly Capable Micropump-fed Propulsion System for Proximity Operations, Landing and Ascent Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Flight Works is proposing to expand its work in micro-gear-pumps for propulsion applications in order to provide a highly capable propulsion and attitude control...

  13. Understanding Global Change: Frameworks and Models for Teaching Systems Thinking

    Science.gov (United States)

    Bean, J. R.; Mitchell, K.; Zoehfeld, K.; Oshry, A.; Menicucci, A. J.; White, L. D.; Marshall, C. R.

    2017-12-01

    The scientific and education communities must impart to teachers, students, and the public an understanding of how the various factors that drive climate and global change operate, and why the rates and magnitudes of these changes related to human perturbation of Earth system processes today are cause for deep concern. Even though effective educational modules explaining components of the Earth and climate system exist, interdisciplinary learning tools are necessary to conceptually link the causes and consequences of global changes. To address this issue, the Understanding Global Change Project at the University of California Museum of Paleontology (UCMP) at UC Berkeley developed an interdisciplinary framework that organizes global change topics into three categories: (1) causes of climate change, both human and non-human (e.g., burning of fossil fuels, deforestation, Earth's tilt and orbit), (2) Earth system processes that shape the way the Earth works (e.g., Earth's energy budget, water cycle), and (3) the measurable changes in the Earth system (e.g., temperature, precipitation, ocean acidification). To facilitate student learning about the Earth as a dynamic, interacting system, a website will provide visualizations of Earth system models and written descriptions of how each framework topic is conceptually linked to other components of the framework. These visualizations and textual summarizations of relationships and feedbacks in the Earth system are a unique and crucial contribution to science communication and education, informed by a team of interdisciplinary scientists and educators. The system models are also mechanisms by which scientists can communicate how their own work informs our understanding of the Earth system. Educators can provide context and relevancy for authentic datasets and concurrently can assess student understanding of the interconnectedness of global change phenomena. The UGC resources will be available through a web-based platform and

  14. Understanding human metabolic physiology: a genome-to-systems approach.

    Science.gov (United States)

    Mo, Monica L; Palsson, Bernhard Ø

    2009-01-01

    The intricate nature of human physiology renders its study a difficult undertaking, and a systems biology approach is necessary to understand the complex interactions involved. Network reconstruction is a key step in systems biology and represents a common denominator because all systems biology research on a target organism relies on such a representation. With the recent development of genome-scale human metabolic networks, metabolic systems analysis is now possible and has initiated a shift towards human systems biology. Here, we review the important aspects of reconstructing a bottom-up human metabolic network, the network's role in modeling human physiology and the necessity for a community-based consensus reconstruction of human metabolism to be established.

  15. Role of systems pharmacology in understanding drug adverse events

    Science.gov (United States)

    Berger, Seth I.; Iyengar, Ravi

    2011-01-01

    Systems pharmacology involves the application of systems biology approaches, combining large-scale experimental studies with computational analyses, to the study of drugs, drug targets, and drug effects. Many of these initial studies have focused on identifying new drug targets, new uses of known drugs, and systems-level properties of existing drugs. This review focuses on systems pharmacology studies that aim to better understand drug side effects and adverse events. By studying the drugs in the context of cellular networks, these studies provide insights into adverse events caused by off-targets of drugs as well as adverse events-mediated complex network responses. This allows rapid identification of biomarkers for side effect susceptibility. In this way, systems pharmacology will lead to not only newer and more effective therapies, but safer medications with fewer side effects. PMID:20803507

  16. Petroleum system modeling capabilities for use in oil and gas resource assessments

    Science.gov (United States)

    Higley, Debra K.; Lewan, Michael; Roberts, Laura N.R.; Henry, Mitchell E.

    2006-01-01

    Summary: Petroleum resource assessments are among the most highly visible and frequently cited scientific products of the U.S. Geological Survey. The assessments integrate diverse and extensive information on the geologic, geochemical, and petroleum production histories of provinces and regions of the United States and the World. Petroleum systems modeling incorporates these geoscience data in ways that strengthen the assessment process and results are presented visually and numerically. The purpose of this report is to outline the requirements, advantages, and limitations of one-dimensional (1-D), two-dimensional (2-D), and three-dimensional (3-D) petroleum systems modeling that can be applied to the assessment of oil and gas resources. Primary focus is on the application of the Integrated Exploration Systems (IES) PetroMod? software because of familiarity with that program as well as the emphasis by the USGS Energy Program on standardizing to one modeling application. The Western Canada Sedimentary Basin (WCSB) is used to demonstrate the use of the PetroMod? software. Petroleum systems modeling quantitatively extends the 'total petroleum systems' (TPS) concept (Magoon and Dow, 1994; Magoon and Schmoker, 2000) that is employed in USGS resource assessments. Modeling allows integration of state-of-the-art analysis techniques, and provides the means to test and refine understanding of oil and gas generation, migration, and accumulation. Results of modeling are presented visually, numerically, and statistically, which enhances interpretation of the processes that affect TPSs through time. Modeling also provides a framework for the input and processing of many kinds of data essential in resource assessment, including (1) petroleum system elements such as reservoir, seal, and source rock intervals; (2) timing of depositional, hiatus, and erosional events and their influences on petroleum systems; (3) incorporation of vertical and lateral distribution and lithologies of

  17. Free Electron Laser For The Siberian Centre For Photochemical Reseach Software And Capabilities Of Beam Position Measurement System

    CERN Document Server

    Dementyev, E N; Medvedko, A S; Oreshkov, A D; Serednyakov, S I; Shubin, E N; Vinokurov, N A

    2004-01-01

    The system for electron beam position measurement in microtron-recuperator, using the electrostatic pick-up electrodes is described. Option of simultaneous detection of accelerated and decelerated electron beams is considered. The software and its capability of integration to the Epics control system using Epics Channel Access protocol are discussed.

  18. A Framework for Understanding Post-Merger Information Systems Integration

    DEFF Research Database (Denmark)

    Alaranta, Maria; Kautz, Karlheinz

    2012-01-01

    that researchers and managers of post-merger IS integration should pay particular attention to the IS and organizational merger contexts; the need to build relationships and collaboration between the merging parties; power struggles; and, perhaps most importantly, understanding and treating post......This paper develops a theoretical framework for the integration of information systems (IS) after a merger or an acquisition. The framework integrates three perspectives: a structuralist, an individualist, and an interactive process perspective to analyze and understand such integrations....... The framework is applied to a longitudinal case study of a manufacturing company that grew through an acquisition. The management decided to integrate the production control IS via tailoring a new system that blends together features of existing IS. The application of the framework in the case study confirms...

  19. Understanding Science: Frameworks for using stories to facilitate systems thinking

    Science.gov (United States)

    ElShafie, S. J.; Bean, J. R.

    2017-12-01

    Studies indicate that using a narrative structure for teaching and learning helps audiences to process and recall new information. Stories also help audiences retain specific information, such as character names or plot points, in the context of a broader narrative. Stories can therefore facilitate high-context systems learning in addition to low-context declarative learning. Here we incorporate a framework for science storytelling, which we use in communication workshops, with the Understanding Science framework developed by the UC Museum of Paleontology (UCMP) to explore the application of storytelling to systems thinking. We translate portions of the Understanding Science flowchart into narrative terms. Placed side by side, the two charts illustrate the parallels between the scientific process and the story development process. They offer a roadmap for developing stories about scientific studies and concepts. We also created a series of worksheets for use with the flowcharts. These new tools can generate stories from any perspective, including a scientist conducting a study; a character that plays a role in a larger system (e.g., foraminifera or a carbon atom); an entire system that interacts with other systems (e.g., the carbon cycle). We will discuss exemplar stories about climate change from each of these perspectives, which we are developing for workshops using content and storyboard models from the new UCMP website Understanding Global Change. This conceptual framework and toolkit will help instructors to develop stories about scientific concepts for use in a classroom setting. It will also help students to analyze stories presented in class, and to create their own stories about new concepts. This approach facilitates student metacognition of the learning process, and can also be used as a form of evaluation. We are testing this flowchart and its use in systems teaching with focus groups, in preparation for use in teacher professional development workshops.

  20. Understanding of the management information system based on MVC pattern

    Science.gov (United States)

    Chen, Sida

    2018-04-01

    With the development of the society, people have come to realize the significance of information, not only linguistically but also in the written form. To build an effective and efficient working flow, a new subject called Management Information System (MIS) came up. MIS is an integrated discipline, which utilizes comprehensive and systematical methods to manage information, and it enhances the work efficiency through building structured information platform. This paper demonstrates the Management Information System from shallow too deep with the understanding of MVC pattern, including its basic structure and application with ASP.NET. Also some discussions about its features are made in the last section.

  1. Dynamic systems for everyone understanding how our world works

    CERN Document Server

    Ghosh, Asish

    2017-01-01

    Systems are everywhere and we are surrounded by them. We are a complex amalgam of systems that enable us to interact with an endless array of external systems in our daily lives. They are electrical, mechanical, social, biological, and many other types that control our environment and our well-being. By appreciating how these systems function, will broaden our understanding of how our world works. Readers from a variety of disciplines will benefit from the knowledge of system behavior they will gain from this book and will be able to apply those principles in various contexts. The treatment of the subject is non-mathematical, and the book considers some of the latest concepts in the systems discipline, such as agent based systems, optimization, and discrete events and procedures. The diverse range of examples provided in this book, will allow readers to: Apply system knowledge at work and in daily life without deep mathematical knowledge; Build models and simulate system behaviors on a personal computer; Opti...

  2. Laser Ranging in Solar System: Technology Developments and New Science Measurement Capabilities

    Science.gov (United States)

    Sun, X.; Smith, D. E.; Zuber, M. T.; Mcgarry, J.; Neumann, G. A.; Mazarico, E.

    2015-12-01

    Laser Ranging has played a major role in geodetic studies of the Earth over the past 40 years. The technique can potentially be used in between planets and spacecrafts within the solar system to advance planetary science. For example, a direct measurement of distances between planets, such as Mars and Venus would make significant improvements in understanding the dynamics of the whole solar system, including the masses of the planets and moons, asteroids and their perturbing interactions, and the gravity field of the Sun. Compared to the conventional radio frequency (RF) tracking systems, laser ranging is potentially more accurate because it is much less sensitive to the transmission media. It is also more efficient because the laser beams are much better focused onto the targets than RF beams. However, existing laser ranging systems are all Earth centric, that is, from ground stations on Earth to orbiting satellites in near Earth orbits or lunar orbit, and to the lunar retro-reflector arrays deployed by the astronauts in the early days of lunar explorations. Several long distance laser ranging experiments have been conducted with the lidar in space, including a two-way laser ranging demonstration between Earth and the Mercury Laser Altimeter (MLA) on the MESSENGER spacecraft over 24 million km, and a one way laser transmission and detection experiment over 80 million km between Earth and the Mars Orbiting Laser Altimeter (MOLA) on the MGS spacecraft in Mars orbit. A one-way laser ranging operation has been carried out continuously from 2009 to 2014 between multiple ground stations to LRO spacecraft in lunar orbit. The Lunar Laser Communication Demonstration (LLCD) on the LADEE mission has demonstrated that a two way laser ranging measurements, including both the Doppler frequency and the phase shift, can be obtained from the subcarrier or the data clocks of a high speed duplex laser communication system. Plans and concepts presently being studied suggest we may be

  3. Artificial Neural Network Application for Power Transfer Capability and Voltage Calculations in Multi-Area Power System

    Directory of Open Access Journals (Sweden)

    Palukuru NAGENDRA

    2010-12-01

    Full Text Available In this study, the use of artificial neural network (ANN based model, multi-layer perceptron (MLP network, to compute the transfer capabilities in a multi-area power system was explored. The input for the ANN is load status and the outputs are the transfer capability among the system areas, voltage magnitudes and voltage angles at concerned buses of the areas under consideration. The repeated power flow (RPF method is used in this paper for calculating the power transfer capability, voltage magnitudes and voltage angles necessary for the generation of input-output patterns for training the proposed MLP neural network. Preliminary investigations on a three area 30-bus system reveal that the proposed model is computationally faster than the conventional method.

  4. Enhanced defect detection capability using learning system for extreme ultraviolet lithography mask inspection tool with projection electron microscope optics

    Science.gov (United States)

    Hirano, Ryoichi; Hatakeyama, Masahiro; Terao, Kenji; Watanabe, Hidehiro

    2016-04-01

    Extreme ultraviolet lithography (EUVL) patterned mask defect detection is a major issue that must be addressed to realize EUVL-based device fabrication. We have designed projection electron microscope (PEM) optics for integration into a mask inspection system, and the resulting PEM system performs well in half-pitch (hp) 16-nm-node EUVL patterned mask inspection applications. A learning system has been used in this PEM patterned mask inspection tool. The PEM identifies defects using the "defectivity" parameter that is derived from the acquired image characteristics. The learning system has been developed to reduce the labor and the costs associated with adjustment of the PEM's detection capabilities to cope with newly defined mask defects. The concepts behind this learning system and the parameter optimization flow are presented here. The learning system for the PEM is based on a library of registered defects. The learning system then optimizes the detection capability by reconciling previously registered defects with newly registered defects. Functional verification of the learning system is also described, and the system's detection capability is demonstrated by applying it to the inspection of hp 11-nm EUV masks. We can thus provide a user-friendly mask inspection system with reduced cost of ownership.

  5. Study on supporting system for operator's comprehensive understanding

    International Nuclear Information System (INIS)

    Yoshikawa, Shinji

    1996-01-01

    Power Reactor and Nuclear Fuel Development Corp. has participated in the development of a system to support the process of operator's plant understanding by the use of information processing techniques such as artificial intelligence since 1994. Analysis and model formation of the process leading to operator's comprehensive understanding of plant (mental model) are undertaken attempting to determine the basic structure of the mental model available for the description of knowledge using the precedent survey and to observe how to utilize operator's own knowledge. After consideration of the way by which plant operators utilize their physical knowledges and the knowledges of physical observation in practice, a basic structure composed of 3 components a qualitative causal network, a hierarchical function model and 3 links joining the two was proposed for the mental model. A questionnaire survey on operator's statements was made and the contents were assigned in several categories for objective analysis. An unified form usable to make a data base was established. Further, we have a plan to develop the first proto-type system to promote operator's understanding by 1998. (M.N.)

  6. Full Scale Advanced Systems Testbed (FAST): Capabilities and Recent Flight Research

    Science.gov (United States)

    Miller, Christopher

    2014-01-01

    At the NASA Armstrong Flight Research Center research is being conducted into flight control technologies that will enable the next generation of air and space vehicles. The Full Scale Advanced Systems Testbed (FAST) aircraft provides a laboratory for flight exploration of these technologies. In recent years novel but simple adaptive architectures for aircraft and rockets have been researched along with control technologies for improving aircraft fuel efficiency and control structural interaction. This presentation outlines the FAST capabilities and provides a snapshot of the research accomplishments to date. Flight experimentation allows a researcher to substantiate or invalidate their assumptions and intuition about a new technology or innovative approach Data early in a development cycle is invaluable for determining which technology barriers are real and which ones are imagined Data for a technology at a low TRL can be used to steer and focus the exploration and fuel rapid advances based on real world lessons learned It is important to identify technologies that are mature enough to benefit from flight research data and not be tempted to wait until we have solved all the potential issues prior to getting some data Sometimes a stagnated technology just needs a little real world data to get it going One trick to getting data for low TRL technologies is finding an environment where it is okay to take risks, where occasional failure is an expected outcome Learning how things fail is often as valuable as showing that they work FAST has been architected to facilitate this type of testing for control system technologies, specifically novel algorithms and sensors Rapid prototyping with a quick turnaround in a fly-fix-fly paradigm Sometimes it's easier and cheaper to just go fly it than to analyze the problem to death The goal is to find and test control technologies that would benefit from flight data and find solutions to the real barriers to innovation. The FAST

  7. Systemic thinking fundamentals for understanding problems and messes

    CERN Document Server

    Hester, Patrick T

    2014-01-01

    Whether you’re an academic or a practitioner, a sociologist, a manager, or an engineer, one can benefit from learning to think systemically.  Problems (and messes) are everywhere and they’re getting more complicated every day.  How we think about these problems determines whether or not we’ll be successful in understanding and addressing them.  This book presents a novel way to think about problems (and messes) necessary to attack these always-present concerns.  The approach draws from disciplines as diverse as mathematics, biology, and psychology to provide a holistic method for dealing with problems that can be applied to any discipline. This book develops the systemic thinking paradigm, and introduces practical guidelines for the deployment of a systemic thinking approach.

  8. Systems biology for understanding and engineering of heterotrophic oleaginous microorganisms.

    Science.gov (United States)

    Park, Beom Gi; Kim, Minsuk; Kim, Joonwon; Yoo, Heewang; Kim, Byung-Gee

    2017-01-01

    Heterotrophic oleaginous microorganisms continue to draw interest as they can accumulate a large amount of lipids which is a promising feedstock for the production of biofuels and oleochemicals. Nutrient limitation, especially nitrogen limitation, is known to effectively trigger the lipid production in these microorganisms. For the aim of developing improved strains, the mechanisms behind the lipid production have been studied for a long time. Nowadays, system-level understanding of their metabolism and associated metabolic switches is attainable with modern systems biology tools. This work reviews the systems biology studies, based on (i) top-down, large-scale 'omics' tools, and (ii) bottom-up, mathematical modeling methods, on the heterotrophic oleaginous microorganisms with an emphasis on further application to metabolic engineering. Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. System Behaviour Charts Inform an Understanding of Biodiversity Recovery

    Directory of Open Access Journals (Sweden)

    Simon A. Black

    2015-01-01

    Full Text Available Practitioners working with species and ecosystem recovery typically deal with the complexity of, on one hand, lack of data or data uncertainties and, on the other hand, demand for critical decision-making and intervention. The control chart methods of commercial and industrial and environmental monitoring can complement an ecological understanding of wildlife systems including those situations which incorporate human activities and land use. Systems Behaviour Charts are based upon well-established control chart methods to provide conservation managers with an approach to using existing data and enable insight to aid timely planning of conservation interventions and also complement and stimulate research into wider scientific and ecological questions. When the approach is applied to existing data sets in well-known wildlife conservation cases, the subsequent Systems Behaviour Charts and associated analytical criteria demonstrate insights which would be helpful in averting problems associated with each case example.

  10. Current understanding of interactions between nanoparticles and the immune system.

    Science.gov (United States)

    Dobrovolskaia, Marina A; Shurin, Michael; Shvedova, Anna A

    2016-05-15

    The delivery of drugs, antigens, and imaging agents benefits from using nanotechnology-based carriers. The successful translation of nanoformulations to the clinic involves thorough assessment of their safety profiles, which, among other end-points, includes evaluation of immunotoxicity. The past decade of research focusing on nanoparticle interaction with the immune system has been fruitful in terms of understanding the basics of nanoparticle immunocompatibility, developing a bioanalytical infrastructure to screen for nanoparticle-mediated immune reactions, beginning to uncover the mechanisms of nanoparticle immunotoxicity, and utilizing current knowledge about the structure-activity relationship between nanoparticles' physicochemical properties and their effects on the immune system to guide safe drug delivery. In the present review, we focus on the most prominent pieces of the nanoparticle-immune system puzzle and discuss the achievements, disappointments, and lessons learned over the past 15years of research on the immunotoxicity of engineered nanomaterials. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. The National Polar-orbiting Operational Environmental Satellite System - Restructured Capabilities for Operational Ocean Remote Sensing

    Science.gov (United States)

    2008-09-01

    aerosols, cloud cover, surface albedo , and snow cover. Performance at the sensor level is expected to be comparable to MODIS [8], and as such represents...and research satellites with ocean observation capabilities such as the Moderate Resolution Imaging Spectroradiometer ( MODIS ) on the NASA Terra...temperature, soil moisture, sea ice characterization, precipitation, snow water equivalent, cloud liquid water, cloud base height, and atmospheric

  12. Center-TRACON Automation System (CTAS) En Route Trajectory Predictor Requirements and Capabilities

    Science.gov (United States)

    Vivona, Robert; Cate, Karen Tung

    2013-01-01

    This requirements framework document is designed to support the capture of requirements and capabilities for state-of-the-art trajectory predictors (TPs). This framework has been developed to assist TP experts in capturing a clear, consistent, and cross-comparable set of requirements and capabilities. The goal is to capture capabilities (types of trajectories that can be built), functional requirements (including inputs and outputs), non-functional requirements (including prediction accuracy and computational performance), approaches for constraint relaxation, and input uncertainties. The sections of this framework are based on the Common Trajectory Predictor structure developed by the FAA/Eurocontrol Cooperative R&D Action Plan 16 Committee on Common Trajectory Prediction. It is assumed that the reader is familiar with the Common TP Structure.1 This initial draft is intended as a first cut capture of the En Route TS Capabilities and Requirements. As such, it contains many annotations indicating possible logic errors in the CTAS code or in the description provided. It is intended to work out the details of the annotations with NASA and to update this document at a later time.

  13. Enhancing LVRT Capability of DFIG-Based Wind Turbine Systems with SMES Series in the Rotor Side

    Directory of Open Access Journals (Sweden)

    Xiao Zhou

    2017-01-01

    Full Text Available The necessary Low Voltage Ride Through (LVRT capability is very important to wind turbines. This paper presents a method to enhance LVRT capability of doubly fed induction generators- (DFIGs- based wind turbine systems with series superconducting magnetic energy storage (SMES in the rotor side. When grid fault occurs, series SMES in the rotor side is utilized to produce a desired output voltage and absorbs energy. Compared with other methods which enhance LVRT capability with Superconducting Fault-Current Limiter-Magnetic Energy Storage System (SFCL-MESS, this strategy can control the output voltage of SMES to suppress the transient AC voltage component in the rotor directly, which is more effective and rapid. Theoretical study of the DFIG under low voltage fault is developed; the simulation results are operated by MATLAB/Simulink.

  14. Understanding the behavior of floodplains as human-water systems

    Science.gov (United States)

    Di Baldassarre, G.; Brandimarte, L.

    2012-12-01

    Floodplains are among the most valuable ecosystems for supporting biodiversity and providing services to the environment. Moreover, they are home of approximately one-sixth of the world population as they offer favorable conditions for economic development. As a result, flood disasters currently affect more than 100 million people a year. Sadly, flood losses and fatalities are expected to increase further in many countries because of population growth as well as changes in land use and climate. Given the relevance of floodplain systems, a number of social scientists have examined how the frequency and severity of flooding often determine whether human development in floodplains is desirable or not. Meanwhile, many earth scientists have investigated the impact of human activities (e.g. land-use changes, urbanization, river training) on the frequency and magnitude of floods. In fact, as human activities change the frequency of flooding, the frequency of flooding affects human developments in floodplain areas. Yet, these dynamic interactions between floods and societies and the associated feedback mechanisms remain largely unexplored and poorly understood. As a result, we typically consider humans as external forcing (or boundary condition) without representing the feedback loops and our prediction of future trajectories are therefore extremely limited. This presentation shows a first attempt to understand the behavior of floodplains as coupled human-water systems. In particular, we analyzed a number of long time series of hydrological and population data in the Po River Basin (Italy) to explore the feedback mechanisms, reciprocal effects, surprises, and threshold mechanisms, taking place in floodplain systems. The outcomes of the study enable a better understanding of how the occurrences of floods shape human developments while, at the same time, human activities shape the magnitude and frequency of floods. The presentation also discusses the opportunities offered by

  15. Capabilities for Strategic Adaptation

    DEFF Research Database (Denmark)

    Distel, Andreas Philipp

    This dissertation explores capabilities that enable firms to strategically adapt to environmental changes and preserve competitiveness over time – often referred to as dynamic capabilities. While dynamic capabilities being a popular research domain, too little is known about what these capabilities...... are in terms of their constituent elements, where these capabilities come from, and how their effectiveness can be fostered. Thus, the dissertation’s aim is to address these gaps by advancing our understanding of the multilevel aspects and micro-foundations of dynamic capabilities. In doing so, it focuses...... on capabilities for sensing and seizing new business opportunities and reconfiguring corporate resources. More specifically, the dissertation examines the role of key organization members, such as knowledge workers and top managers, in defining and building these capabilities. Moreover, it investigates how...

  16. Spoken Language Understanding Systems for Extracting Semantic Information from Speech

    CERN Document Server

    Tur, Gokhan

    2011-01-01

    Spoken language understanding (SLU) is an emerging field in between speech and language processing, investigating human/ machine and human/ human communication by leveraging technologies from signal processing, pattern recognition, machine learning and artificial intelligence. SLU systems are designed to extract the meaning from speech utterances and its applications are vast, from voice search in mobile devices to meeting summarization, attracting interest from both commercial and academic sectors. Both human/machine and human/human communications can benefit from the application of SLU, usin

  17. A Model for a Single Unmanned Aircraft Systems (UAS) Program Office Managing Joint ISR Capabilities

    Science.gov (United States)

    2017-10-01

    to get new capability to the field. A single management structure provides a portfolio perspective and enables strategic management . Decisions... strategic management across all of the medium to high altitude UAS portfolio there will continue to be tension in achieving the joint nature of these... managing the medium to high altitude UAS assets. This would be done by employing agile methodology at the strategic level and by eliminating redundant

  18. Exploring high-level Perspectives on Self-Configuration Capabilities of Systems

    OpenAIRE

    Lodwich, Aleksander

    2016-01-01

    Optimization of product performance repetitively introduces the need to make products adaptive in a more general sense. This more general idea is often captured under the term 'self-configuration'. Despite the importance of such capability, research work on this feature appears isolated by technical domains. It is not easy to tell quickly whether the approaches chosen in different technological domains introduce new ideas or whether the differences just reflect domain idiosyncrasies. For the ...

  19. Will smart surveillance systems listen, understand and speak Slovene?

    Directory of Open Access Journals (Sweden)

    Simon Dobrišek

    2013-12-01

    Full Text Available The paper deals with the spoken language technologies that could enable the so-called smart (intelligent surveillance systems to listen, understand and speak Slovenian in the near future. Advanced computational methods of artificial perception and pattern recognition enable such systems to be at least to some extent aware of the environment, the presence of people and other phenomena that could be subject to surveillance. Speech is one such phenomenon that has the potential to be a key source of information in certain security situations. Technologies that enable automatic speech and speaker recognition as well as their psychophysical state by computer analysis of acoustic speech signals provide an entirely new dimension to the development of smart surveillance systems. Automatic recognition of spoken threats, screaming and crying for help, as well as a suspicious psycho-physical state of a speaker provide such systems to some extent with intelligent behaviour. The paper investigates the current state of development of these technologies and the requirements and possibilities of these systems to be used for the Slovenian spoken language, as well as different possible security application scenarios. It also addresses the broader legal and ethical issues raised by the development and use of such technologies, especially as audio surveillance is one of the most sensitive issues of privacy protection.

  20. Creativity Understandings, Evolution: from Genius to Creative Systems

    Directory of Open Access Journals (Sweden)

    Jūratė Černevičiūtė

    2014-10-01

    Full Text Available The understanding of creativity in the social sciencies became more complex with the course of time. The concepts of creative individual, creative process and environment are discussed. Looking at the environment, distinction was made on three levels: macro, meso and micro. The impact of environments on creativity is analyzed, focusing attention on the collective creativity as the positive micro-environmental factor for innovations. Insights are gained about the tendency to move from an exclusive, elite, narrow concept of creativity, measured by the creation of products and their abundance, towards a broader, democratic concept of everyday creativity of the most people. The conclusion is that the creative industries of the exceptional creativity of genius or talent and mysticism are gradually transformed to broader creativity as the governed system, emphasizing creativity links with internal elements of the system and with the social context.

  1. Understanding how replication processes can maintain systems away from equilibrium using Algorithmic Information Theory.

    Science.gov (United States)

    Devine, Sean D

    2016-02-01

    Replication can be envisaged as a computational process that is able to generate and maintain order far-from-equilibrium. Replication processes, can self-regulate, as the drive to replicate can counter degradation processes that impact on a system. The capability of replicated structures to access high quality energy and eject disorder allows Landauer's principle, in conjunction with Algorithmic Information Theory, to quantify the entropy requirements to maintain a system far-from-equilibrium. Using Landauer's principle, where destabilising processes, operating under the second law of thermodynamics, change the information content or the algorithmic entropy of a system by ΔH bits, replication processes can access order, eject disorder, and counter the change without outside interventions. Both diversity in replicated structures, and the coupling of different replicated systems, increase the ability of the system (or systems) to self-regulate in a changing environment as adaptation processes select those structures that use resources more efficiently. At the level of the structure, as selection processes minimise the information loss, the irreversibility is minimised. While each structure that emerges can be said to be more entropically efficient, as such replicating structures proliferate, the dissipation of the system as a whole is higher than would be the case for inert or simpler structures. While a detailed application to most real systems would be difficult, the approach may well be useful in understanding incremental changes to real systems and provide broad descriptions of system behaviour. Copyright © 2016 The Author. Published by Elsevier Ireland Ltd.. All rights reserved.

  2. Understanding Challenges in the Front Lines of Home Health Care: A Human-Systems Approach

    Science.gov (United States)

    Beer, Jenay M.; McBride, Sara E.; Mitzner, Tracy L.; Rogers, Wendy A.

    2014-01-01

    A human-systems perspective is a fruitful approach to understanding home health care because it emphasizes major individual components of the system – persons, equipment/technology, tasks, and environments –as well as the interaction between these components. The goal of this research was to apply a human-system perspective to consider the capabilities and limitations of the persons, in relation to the demands of the tasks and equipment/technology in home health care. Identification of challenges and mismatches between the person(s) capabilities and the demands of providing care provide guidance for human factors interventions. A qualitative study was conducted with 8 home health Certified Nursing Assistants and 8 home health Registered Nurses interviewed about challenges they encounter in their jobs. A systematic categorization of the challenges the care providers reported was conducted and human factors recommendations were proposed in response, to improve home health. The challenges inform a human-systems model of home health care. PMID:24958610

  3. Understanding Resilient Urban Futures: A Systemic Modelling Approach

    Directory of Open Access Journals (Sweden)

    Ralph Chapman

    2013-07-01

    Full Text Available The resilience of cities in response to natural disasters and long-term climate change has emerged as a focus of academic and policy attention. In particular, how to understand the interconnectedness of urban and natural systems is a key issue. This paper introduces an urban model that can be used to evaluate city resilience outcomes under different policy scenarios. The model is the Wellington Integrated Land Use-Transport-Environment Model (WILUTE. It considers the city (i.e., Wellington as a complex system characterized by interactions between a variety of internal urban processes (social, economic and physical and the natural environment. It is focused on exploring the dynamic relations between human activities (the geographic distribution of housing and employment, infrastructure layout, traffic flows and energy consumption, environmental effects (carbon emissions, influences on local natural and ecological systems and potential natural disasters (e.g., inundation due to sea level rise and storm events faced under different policy scenarios. The model gives insights that are potentially useful for policy to enhance the city’s resilience, by modelling outcomes, such as the potential for reduction in transportation energy use, and changes in the vulnerability of the city’s housing stock and transport system to sea level rise.

  4. Capability ethics

    NARCIS (Netherlands)

    I.A.M. Robeyns (Ingrid)

    2012-01-01

    textabstractThe capability approach is one of the most recent additions to the landscape of normative theories in ethics and political philosophy. Yet in its present stage of development, the capability approach is not a full-blown normative theory, in contrast to utilitarianism, deontological

  5. Development of Computational Capabilities to Predict the Corrosion Wastage of Boiler Tubes in Advanced Combustion Systems

    Energy Technology Data Exchange (ETDEWEB)

    Kung, Steven; Rapp, Robert

    2014-08-31

    A comprehensive corrosion research project consisting of pilot-scale combustion testing and long-term laboratory corrosion study has been successfully performed. A pilot-scale combustion facility available at Brigham Young University was selected and modified to enable burning of pulverized coals under the operating conditions typical for advanced coal-fired utility boilers. Eight United States (U.S.) coals were selected for this investigation, with the test conditions for all coals set to have the same heat input to the combustor. In addition, the air/fuel stoichiometric ratio was controlled so that staged combustion was established, with the stoichiometric ratio maintained at 0.85 in the burner zone and 1.15 in the burnout zone. The burner zone represented the lower furnace of utility boilers, while the burnout zone mimicked the upper furnace areas adjacent to the superheaters and reheaters. From this staged combustion, approximately 3% excess oxygen was attained in the combustion gas at the furnace outlet. During each of the pilot-scale combustion tests, extensive online measurements of the flue gas compositions were performed. In addition, deposit samples were collected at the same location for chemical analyses. Such extensive gas and deposit analyses enabled detailed characterization of the actual combustion environments existing at the lower furnace walls under reducing conditions and those adjacent to the superheaters and reheaters under oxidizing conditions in advanced U.S. coal-fired utility boilers. The gas and deposit compositions were then carefully simulated in a series of 1000-hour laboratory corrosion tests, in which the corrosion performances of different commercial candidate alloys and weld overlays were evaluated at various temperatures for advanced boiler systems. Results of this laboratory study led to significant improvement in understanding of the corrosion mechanisms operating on the furnace walls as well as superheaters and reheaters in

  6. Control Systems Engineering for Understanding and Optimizing Smoking Cessation Interventions.

    Science.gov (United States)

    Timms, Kevin P; Rivera, Daniel E; Collins, Linda M; Piper, Megan E

    2013-01-01

    Cigarette smoking remains a major public health issue. Despite a variety of treatment options, existing intervention protocols intended to support attempts to quit smoking have low success rates. An emerging treatment framework, referred to as adaptive interventions in behavioral health, addresses the chronic, relapsing nature of behavioral health disorders by tailoring the composition and dosage of intervention components to an individual's changing needs over time. An important component of a rapid and effective adaptive smoking intervention is an understanding of the behavior change relationships that govern smoking behavior and an understanding of intervention components' dynamic effects on these behavioral relationships. As traditional behavior models are static in nature, they cannot act as an effective basis for adaptive intervention design. In this article, behavioral data collected daily in a smoking cessation clinical trial is used in development of a dynamical systems model that describes smoking behavior change during cessation as a self-regulatory process. Drawing from control engineering principles, empirical models of smoking behavior are constructed to reflect this behavioral mechanism and help elucidate the case for a control-oriented approach to smoking intervention design.

  7. Current understanding of interactions between nanoparticles and the immune system

    International Nuclear Information System (INIS)

    Dobrovolskaia, Marina A.; Shurin, Michael; Shvedova, Anna A.

    2016-01-01

    The delivery of drugs, antigens, and imaging agents benefits from using nanotechnology-based carriers. The successful translation of nanoformulations to the clinic involves thorough assessment of their safety profiles, which, among other end-points, includes evaluation of immunotoxicity. The past decade of research focusing on nanoparticle interaction with the immune system has been fruitful in terms of understanding the basics of nanoparticle immunocompatibility, developing a bioanalytical infrastructure to screen for nanoparticle-mediated immune reactions, beginning to uncover the mechanisms of nanoparticle immunotoxicity, and utilizing current knowledge about the structure–activity relationship between nanoparticles' physicochemical properties and their effects on the immune system to guide safe drug delivery. In the present review, we focus on the most prominent pieces of the nanoparticle–immune system puzzle and discuss the achievements, disappointments, and lessons learned over the past 15 years of research on the immunotoxicity of engineered nanomaterials. - Graphical abstract: API — active pharmaceutical ingredient; NP — nanoparticles; PCP — physicochemical properties, CARPA — complement activation-related pseudoallergy, ICH — International Conference on Harmonization. Display Omitted - Highlights: • Achievements, disappointments and lessons learned over past decade are reviewed. • Areas in focus include characterization, immunotoxicity and utility in drug delivery. • Future direction focusing on mechanistic immunotoxicity studies is proposed.

  8. The everyday lives of video game developers: Experimentally understanding underlying systems/structures

    Directory of Open Access Journals (Sweden)

    Casey O'Donnell

    2009-03-01

    Full Text Available This essay examines how tensions between work and play for video game developers shape the worlds they create. The worlds of game developers, whose daily activity is linked to larger systems of experimentation and technoscientific practice, provide insights that transcend video game development work. The essay draws on ethnographic material from over 3 years of fieldwork with video game developers in the United States and India. It develops the notion of creative collaborative practice based on work in the fields of science and technology studies, game studies, and media studies. The importance of, the desire for, or the drive to understand underlying systems and structures has become fundamental to creative collaborative practice. I argue that the daily activity of game development embodies skills fundamental to creative collaborative practice and that these capabilities represent fundamental aspects of critical thought. Simultaneously, numerous interests have begun to intervene in ways that endanger these foundations of creative collaborative practice.

  9. Research Applications and Capabilities of the NASA/Army Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL)

    Science.gov (United States)

    Aiken, Edwin W.; Jacobsen, Robert A.; Hindson, William S.

    1996-01-01

    The Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL) is a UH-60 Black Hawk helicopter that is being modified by NASA and the US Army for flight systems research. The principal systems that are being installed in the aircraft are a Helmet-Mounted Display (HMD) and associated imaging systems, and a programmable full-authority Research Flight Control System (RFCS). In addition, comprehensive instrumentation of both the rigid body of the helicopter and the rotor system is provided. This paper describes the design features of this modern rotorcraft in-flight simulation facility and their current state of development. A brief description of initial research applications is included.

  10. Comparative Assessment and Decision Support System for Strategic Military Airlift Capability

    Science.gov (United States)

    Salmon, John; Iwata, Curtis; Mavris, Dimitri; Weston, Neil; Fahringer, Philip

    2011-01-01

    The Lockheed Martin Aeronautics Company has been awarded several programs to modernize the aging C-5 military transport fleet. In order to ensure its continuation amidst budget cuts, it was important to engage the decision makers by providing an environment to analyze the benefits of the modernization program. This paper describes an interface that allows the user to change inputs such as the scenario airfields, take-off conditions, and reliability characteristics. The underlying logistics surrogate model was generated using data from a discrete-event simulation. Various visualizations such as intercontinental flight paths illustrated in 3D, have been created to aid the user in analyzing scenarios and performing comparative assessments for various output logistics metrics. The capability to rapidly and dynamically evaluate and compare scenarios was developed enabling real time strategy exploration and trade-offs.

  11. Gossiping Capabilities

    DEFF Research Database (Denmark)

    Mogensen, Martin; Frey, Davide; Guerraoui, Rachid

    declare a high capability in order to augment their perceived quality without contributing accordingly. We evaluate HEAP in the context of a video streaming application on a 236 PlanetLab nodes testbed. Our results shows that HEAP improves the quality of the streaming by 25% over a standard gossip......Gossip-based protocols are now acknowledged as a sound basis to implement collaborative high-bandwidth content dissemination: content location is disseminated through gossip, the actual contents being subsequently pulled. In this paper, we present HEAP, HEterogeneity Aware gossip Protocol, where...... nodes dynamically adjust their contribution to gossip dissemination according to their capabilities. Using a continuous, itself gossip-based, approximation of relative capabilities, HEAP dynamically leverages the most capable nodes by (a) increasing their fanouts (while decreasing by the same proportion...

  12. Study of Command and Control (C&C) Structures on the Employment of Collaborative Engagement Capability (CEC) on Land Systems

    Science.gov (United States)

    2012-09-01

    from various nodes of a network-centric engagement . With at least two ships tracking a common air threat, these ships communicate and 13 share real...computed to be engaged by the anti-air weapon in a single salvo, which may or may not be realistic due to the scale of resources that are to be committed ...CONTROL (C&C) STRUCTURES ON THE EMPLOYMENT OF COLLABORATIVE ENGAGEMENT CAPABILITY (CEC) ON LAND SYSTEMS by Chong Siong Lim September 2012

  13. Mechanical Design and Optimization of Swarm-Capable UAV Launch Systems

    Science.gov (United States)

    2015-06-01

    accelerating the conveyor belts to desired velocity. 58 At this point, the UAV would be inserted into the system , accelerated, and ejected from the far end...design. The system was initially envisioned to utilize a high-grip conveyor belt as the power- transfer method. However, market research showed that...around. After an exhaustive effort to locate modeling methods for chain, the decision was made to approximate the system with a conveyor belt instead

  14. Resilience Management System And Development Of Resilience Capability On Site Workers

    OpenAIRE

    Komatsubara, Akinori

    2013-01-01

    When we consider the safety of socio-technical or safety critical systems, discussions from three layers are required; safety strategy, safety management and safety activity. In this study, development of resilience safety from the three layers is discussed. For the safety management layer, this study proposes resilience management system (RMS) as the style of safety management system (SMS) for resilience safety approach. Two cases at Japanese companies to enhance attitude and non-technical s...

  15. The NFI TOKAI SD System - management of the capabilities of operators in fuel fabrication plants

    International Nuclear Information System (INIS)

    Fukushima, T.

    2008-01-01

    Since the JCO criticality accident occurred in 1999, even more emphasis has been placed on the management of nuclear safety in Japan. This is particularly true for the education of operators and the observance of operational procedures. Even prior to this accident, Nuclear Fuel Industries, Ltd., NFI, regarded the education and development of skilled operators very seriously and we have developed an education system, called the SD system (Skill Development system), to assure the careful education of the operators and the improvement of their skill in order to prevent human error events. Our education system in the Tokai works, is explained. (author)

  16. Towards the Understanding of Induced Seismicity in Enhanced Geothermal Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gritto, Roland [Array Information Technology, Greenbelt, MD (United States); Dreger, Douglas [Univ. of California, Berkeley, CA (United States); Heidbach, Oliver [Helmholtz Centre Potsdam (Germany, German Research Center for Geosciences; Hutchings, Lawrence [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-08-29

    This DOE funded project was a collaborative effort between Array Information Technology (AIT), the University of California at Berkeley (UCB), the Helmholtz Centre Potsdam - German Research Center for Geosciences (GFZ) and the Lawrence Berkeley National Laboratory (LBNL). It was also part of the European research project “GEISER”, an international collaboration with 11 European partners from six countries including universities, research centers and industry, with the goal to address and mitigate the problems associated with induced seismicity in Enhanced Geothermal Systems (EGS). The goal of the current project was to develop a combination of techniques, which evaluate the relationship between enhanced geothermal operations and the induced stress changes and associated earthquakes throughout the reservoir and the surrounding country rock. The project addressed the following questions: how enhanced geothermal activity changes the local and regional stress field; whether these activities can induce medium sized seismicity M > 3; (if so) how these events are correlated to geothermal activity in space and time; what is the largest possible event and strongest ground motion, and hence the potential hazard associated with these activities. The development of appropriate technology to thoroughly investigate and address these questions required a number of datasets to provide the different physical measurements distributed in space and time. Because such a dataset did not yet exist for an EGS system in the United State, we used current and past data from The Geysers geothermal field in northern California, which has been in operation since the 1960s. The research addressed the need to understand the causal mechanisms of induced seismicity, and demonstrated the advantage of imaging the physical properties and temporal changes of the reservoir. The work helped to model the relationship between injection and production and medium sized magnitude events that have

  17. An overview of Russian experience and capabilities for development of ATW/ABC systems

    Science.gov (United States)

    Kazaritsky, Vladimir D.

    1995-09-01

    Several Russian institutes are expected to undertake a feasibility study of nuclear power systems based on proton accelerators. The examined systems are intended for conversion of surplus Pu and transmutation of long-lived radioactive waste. This research motivated by the demilitarization agreements and criticism of traditional nuclear power is focused on environmental protection.

  18. Overview of the ITER EC H&CD system and its capabilities

    NARCIS (Netherlands)

    Omori, T.; Henderson, M. A.; Albajar, F.; Alberti, S.; Baruah, U.; Bigelow, T. S.; Becket, B.; Bertizzolo, R.; Bonicelli, T.; Brusch, A.; Caughman, J. B.; Chavan, R.; Cirant, S.; Collazos, A.; Cox, D.; Darbos, C.; M.R. de Baar,; Denisov, G.; Farina, D.; Gandini, F.; Gassmann, T.; Goodman, T. P.; Heidinger, R.; Hogge, J. P.; Illy, S.; Jean, O.; Jin, J.; Kajiwara, K.; Kasparek, W.; Kasugai, A.; Kern, S.; Kobayashi, N.; Kumric, H.; Landis, J. D.; Moro, A.; Nazare, C.; Oda, Y.; Pagonakis, I.; Piosczyk, B.; Platania, P.; Plaum, B.; Poli, E.; Porte, L.; Purohit, D.; Ramponi, G.; Rao, S. L.; Rasmussen, D. A.; Ronden, D. M. S.; Rzesnicki, T.; Saibene, G.; Sakamoto, K.; Sanchez, F.; Scherer, T.; Shapiro, M. A.; Sozzi, C.; Spaeh, P.; Strauss, D.; Sauter, O.; Takahashi, K.; Temkin, R. J.; Thumm, M.; Tran, M. Q.; Udintsev, V.S.; Zohm, H.

    2011-01-01

    The Electron Cyclotron (EC) system for the ITER tokamak is designed to inject >= 20 MW RF power into the plasma for Heating and Current Drive (H&CD) applications. The EC system consists of up to 26 gyrotrons (between 1 and 2 MW each), the associated power supplies, 24 transmission

  19. Detection Classification and Localisation of Marine Mammals Using the Passive Acoustic Capabilities of an LFAS System

    NARCIS (Netherlands)

    Robert, M.K.; IJsselmuide, S.P. van; Beerens, S.P.

    2004-01-01

    World-wide a concern is emerging about the influence of man-made sound on marine life and more particularly marine mammals, who fully depend on sound in their natural behaviour. High power active sonars systems like Low Frequency Active Sonar (LFAS) are at stake. These systems, designed for long

  20. Learning by Teaching: Undergraduate Engineering Students Improving a Community's Response Capability to an Early Warning System

    Science.gov (United States)

    Suvannatsiri, Ratchasak; Santichaianant, Kitidech; Murphy, Elizabeth

    2015-01-01

    This paper reports on a project in which students designed, constructed and tested a model of an existing early warning system with simulation of debris flow in a context of a landslide. Students also assessed rural community members' knowledge of this system and subsequently taught them to estimate the time needed for evacuation of the community…

  1. THE CAPABILITIES USING OF THREE-DIMENSIONAL MODELING SYSTEM AUTOCAD IN TEACHING TO PERFORM GRAPHICS TASKS

    Directory of Open Access Journals (Sweden)

    A. V. Krasnyuk

    2008-03-01

    Full Text Available Three-dimensional design possibilities of the AutoCAD system for performing graphic tasks are presented in the article. On the basis of the studies conducted the features of application of computer-aided design system are noted and the methods allowing to decrease considerably the quantity of errors at making the drawings are offered.

  2. An overview of Russian experience and capabilities for development of ATW/ABC systems

    Energy Technology Data Exchange (ETDEWEB)

    Kazaritsky, V.D. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation)

    1995-10-01

    Several Russian institutes are expected to undertake a feasibility study of nuclear power systems based on proton accelerators. The examined systems are intended for conversion of surplus Pu and transmutation of long-lived radioactive waste. This research motivated by the demilitarisation agreements and criticism of traditional nuclear power is focused on environmental protection.

  3. Optimized dispatch of wind farms with power control capability for power system restoration

    DEFF Research Database (Denmark)

    Xie, Yunyun; Liu, Changsheng; Wu, Qiuwei

    2017-01-01

    distribution function (PDF) of transient power sags is hard to obtain, a robust optimization model is proposed in this paper, which can maximize the output power of wind farms participating in power system restoration. Simulation results demonstrate that the security constraints of the restored system can......As the power control technology of wind farms develops, the output power of wind farms can be constant, which makes it possible for wind farms to participate in power system restoration. However, due to the uncertainty of wind energy, the actual output power can’t reach a constant dispatch power...... in all time intervals, resulting in uncertain power sags which may induce the frequency of the system being restored to go outside the security limits. Therefore, it is necessary to optimize the dispatch of wind farms participating in power system restoration. Considering that the probability...

  4. Zero-voltage ride-through capability of single-phase grid-connected photovoltaic systems

    DEFF Research Database (Denmark)

    Zhang, Zhen; Yang, Yongheng; Ma, Ruiqing

    2017-01-01

    Distributed renewable energy systems play an increasing role in today’s energy paradigm. Thus, intensive research activities have been centered on improving the performance of renewable energy systems, including photovoltaic (PV) systems, which should be of multiple-functionality. That is, the PV...... systems should be more intelligent in the consideration of grid stability, reliability, and fault protection. Therefore, in this paper, the performance of single-phase grid-connected PV systems under an extreme grid fault (i.e., when the grid voltage dips to zero) is explored. It has been revealed...... that combining a fast and accurate synchronization mechanism with appropriate control strategies for the zero-voltage ride-through (ZVRT) operation is mandatory. Accordingly, the representative synchronization techniques (i.e., the phase-locked loop (PLL) methods) in the ZVRT operation are compared in terms...

  5. Performance assessment of mass flow rate measurement capability in a large scale transient two-phase flow test system

    International Nuclear Information System (INIS)

    Nalezny, C.L.; Chapman, R.L.; Martinell, J.S.; Riordon, R.P.; Solbrig, C.W.

    1979-01-01

    Mass flow is an important measured variable in the Loss-of-Fluid Test (LOFT) Program. Large uncertainties in mass flow measurements in the LOFT piping during LOFT coolant experiments requires instrument testing in a transient two-phase flow loop that simulates the geometry of the LOFT piping. To satisfy this need, a transient two-phase flow loop has been designed and built. The load cell weighing system, which provides reference mass flow measurements, has been analyzed to assess its capability to provide the measurements. The analysis consisted of first performing a thermal-hydraulic analysis using RELAP4 to compute mass inventory and pressure fluctuations in the system and mass flow rate at the instrument location. RELAP4 output was used as input to a structural analysis code SAPIV which is used to determine load cell response. The computed load cell response was then smoothed and differentiated to compute mass flow rate from the system. Comparison between computed mass flow rate at the instrument location and mass flow rate from the system computed from the load cell output was used to evaluate mass flow measurement capability of the load cell weighing system. Results of the analysis indicate that the load cell weighing system will provide reference mass flows more accurately than the instruments now in LOFT

  6. Fault Ride Through Capability Enhancement of a Large-Scale PMSG Wind System with Bridge Type Fault Current Limiters

    Directory of Open Access Journals (Sweden)

    ALAM, M. S.

    2018-02-01

    Full Text Available In this paper, bridge type fault current limiter (BFCL is proposed as a potential solution to the fault problems of permanent magnet synchronous generator (PMSG based large-scale wind energy system. As PMSG wind system is more vulnerable to disturbances, it is essential to guarantee the stability during severe disturbances by enhancing the fault ride through capability. BFCL controller has been designed to insert resistance and inductance during the inception of system disturbances in order to limit fault current. Constant capacitor voltage has been maintained by the grid voltage source converter (GVSC controller while current extraction or injection has been achieved by machine VSC (MVSC controller. Symmetrical and unsymmetrical faults have been applied in the system to show the effectiveness of the proposed BFCL solution. PMSG wind system, BFCL and their controllers have been implemented by real time hardware in loop (RTHIL setup with real time digital simulator (RTDS and dSPACE. Another significant feature of this work is that the performance of the proposed BFCL is compared with that of series dynamic braking resistor (SDBR. Comparative RTHIL implementation results show that the proposed BFCL is very efficient in improving system fault ride through capability by limiting the fault current and outperforms SDBR.

  7. Adhesive capability of total-etch, self-etch, and self-adhesive systems for fiber post cementation

    Science.gov (United States)

    Theodor, Y.; Koesmaningati, H.; Gita, F.

    2017-08-01

    The aim of this study was to analyze whether self-etch and self-adhesive systems are comparable to the total-etch system for fiber post cementation. This experimental laboratory study, which was approved by an ethics committee, was performed using 27 mandibular premolar teeth randomly divided into three groups. Fiber post cementation was done using three different adhesive systems. Specimens were prepared with a thickness of 5 mm, which was measured from the cervical to medial areas of the root, and stored for 24 h in saline solution at room temperature. A push-out test was performed using a universal testing machine (Shimidzu AG-5000E) with a crosshead speed of 0.5 mm/min. The results of one way ANOVA bivariate testing showed that the total-etch and self-etch systems have comparable adhesion capability (p0.05). With easier application, the self-etch system has a comparable adhesion capability to the total-etch system.

  8. Armstrong Flight Research Center Flight Test Capabilities and Opportunities for the Applications of Wireless Data Acquisition Systems

    Science.gov (United States)

    Hang, Richard

    2015-01-01

    The presentation will overview NASA Armstrong Flight Research Centers flight test capabilities, which can provide various means for flight testing of passive and active wireless sensor systems, also, it will address the needs of the wireless data acquisition solutions for the centers flight instrumentation issues such as additional weight caused by added instrumentation wire bundles, connectors, wire cables routing, moving components, etc., that the Passive Wireless Sensor Technology Workshop may help. The presentation shows the constraints and requirements that the wireless sensor systems will face in the flight test applications.

  9. Improving transportation systems management and operations (TSM&O), capability maturity model workshop white paper : collaboration.

    Science.gov (United States)

    2015-04-01

    Research done through the Second Strategic Highway Research Program (SHRP 2) determined : that agencies with the most effective transportation systems management and operations : (TSM&O) activities were differentiated not by budgets or technical skil...

  10. Improving transportation systems management and operations (TSM&O), capability maturity model workshop white paper : culture.

    Science.gov (United States)

    2015-04-01

    Research done through the Second Strategic Highway Research Program (SHRP 2) determined : that agencies with the most effective transportation systems management and operations : (TSM&O) activities were differentiated not by budgets or technical skil...

  11. Procurement procedures and specifications for performance measure capable traffic infrastructure data collection systems.

    Science.gov (United States)

    2012-01-01

    Traffic signal systems represent a substantial component of the highway transportation network in the United : States. It is challenging for most agencies to find engineering resources to properly update signal policies and : timing plans to accommod...

  12. Procurement procedures and specifications for performance measure capable traffic infrastructure data collection systems : [technical summary].

    Science.gov (United States)

    2011-01-01

    Traffic signal systems represent a substantial component of the highway transportation network in the United States. Unfortunately, most agencies struggle to meet the challenge of finding enough resources to properly update signal policies and timing...

  13. Ultra-Low Power Extreme Environment Capable Avionics System-on-a-Chip

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop ultra-low-power, wide-temperature (-150° C to +250 ° C), digital System-on-a-Chip (SOC) ASIC technology in a high resolution, inherently rad-hard IBM...

  14. Interpreting Capability Maturity Model(Trademark) Integration (CMMI(Trademark)) for COTS-Based Systems

    National Research Council Canada - National Science Library

    Tyson, Barbara

    2003-01-01

    ...: adjusted roles and responsibilities, new skills, and different processes. Practitioners are often surprised to find that building and supporting COTS-based systems demands more, not less, discipline in their management and engineering practices...

  15. Assessment of capabilities in persons with advanced stage of dementia: Validation of The Montessori Assessment System (MAS).

    Science.gov (United States)

    Erkes, Jérôme; Camp, Cameron J; Raffard, Stéphane; Gély-Nargeot And, Marie-Christine; Bayard, Sophie

    2017-01-01

    This study evaluated the validity and reliability of the Montessori Assessment System. The Montessori Assessment System assesses preserved abilities in persons with moderate to severe dementia. In this respect, this instrument provides crucial information for the development of effective person-centered care plans. A total of 196 persons with a diagnosis of dementia in the moderate to severe stages of dementia were recruited in 10 long-term care facilities in France. All participants completed the Montessori Assessment System, the Clinical Dementia Rating Scale and/or the Mini Mental State Examination and the Severe Impairment Battery-short form. The internal consistency and temporal stability of the Montessori Assessment System were high. Additionally, good construct and divergent validity were demonstrated. Factor analysis showed a one-factor structure. The Montessori Assessment System demonstrated satisfactory psychometric properties while being a useful instrument to assess capabilities in persons with advanced stages of dementia and hence to develop person-centered plans of care.

  16. Demonstration of Photovoltaic-Powered Cathodic Protection System with Remote Monitoring Capability

    Science.gov (United States)

    2014-02-01

    improves installation by preventing ground loops while providing better lightning protection. Typical situations where PV - powered ICCP is cost...Abstract This project demonstrated an application of photovoltaic ( PV ) technology to power cathodic protection (CP) systems for water tanks at...with the local power grid would be expensive. The demonstrated system, pow- ered only by PV arrays with a battery backup, uses ceramic anodes and in

  17. Understanding product cost vs. performance through an in-depth system Monte Carlo analysis

    Science.gov (United States)

    Sanson, Mark C.

    2017-08-01

    The manner in which an optical system is toleranced and compensated greatly affects the cost to build it. By having a detailed understanding of different tolerance and compensation methods, the end user can decide on the balance of cost and performance. A detailed phased approach Monte Carlo analysis can be used to demonstrate the tradeoffs between cost and performance. In complex high performance optical systems, performance is fine-tuned by making adjustments to the optical systems after they are initially built. This process enables the overall best system performance, without the need for fabricating components to stringent tolerance levels that often can be outside of a fabricator's manufacturing capabilities. A good performance simulation of as built performance can interrogate different steps of the fabrication and build process. Such a simulation may aid the evaluation of whether the measured parameters are within the acceptable range of system performance at that stage of the build process. Finding errors before an optical system progresses further into the build process saves both time and money. Having the appropriate tolerances and compensation strategy tied to a specific performance level will optimize the overall product cost.

  18. Computational Strategies for a System-Level Understanding of Metabolism

    Science.gov (United States)

    Cazzaniga, Paolo; Damiani, Chiara; Besozzi, Daniela; Colombo, Riccardo; Nobile, Marco S.; Gaglio, Daniela; Pescini, Dario; Molinari, Sara; Mauri, Giancarlo; Alberghina, Lilia; Vanoni, Marco

    2014-01-01

    Cell metabolism is the biochemical machinery that provides energy and building blocks to sustain life. Understanding its fine regulation is of pivotal relevance in several fields, from metabolic engineering applications to the treatment of metabolic disorders and cancer. Sophisticated computational approaches are needed to unravel the complexity of metabolism. To this aim, a plethora of methods have been developed, yet it is generally hard to identify which computational strategy is most suited for the investigation of a specific aspect of metabolism. This review provides an up-to-date description of the computational methods available for the analysis of metabolic pathways, discussing their main advantages and drawbacks.  In particular, attention is devoted to the identification of the appropriate scale and level of accuracy in the reconstruction of metabolic networks, and to the inference of model structure and parameters, especially when dealing with a shortage of experimental measurements. The choice of the proper computational methods to derive in silico data is then addressed, including topological analyses, constraint-based modeling and simulation of the system dynamics. A description of some computational approaches to gain new biological knowledge or to formulate hypotheses is finally provided. PMID:25427076

  19. Directed Design of Experiments for Validating Probability of Detection Capability of a Testing System

    Science.gov (United States)

    Generazio, Edward R. (Inventor)

    2012-01-01

    A method of validating a probability of detection (POD) testing system using directed design of experiments (DOE) includes recording an input data set of observed hit and miss or analog data for sample components as a function of size of a flaw in the components. The method also includes processing the input data set to generate an output data set having an optimal class width, assigning a case number to the output data set, and generating validation instructions based on the assigned case number. An apparatus includes a host machine for receiving the input data set from the testing system and an algorithm for executing DOE to validate the test system. The algorithm applies DOE to the input data set to determine a data set having an optimal class width, assigns a case number to that data set, and generates validation instructions based on the case number.

  20. Capability of LEP-type surfaces to describe noncollinear reactions 2 - Polyatomic systems

    CERN Document Server

    Espinosa-Garcia, Joaquin

    2001-01-01

    In this second article of the series, the popular LEP-type surface for collinear reaction paths and a "bent" surface, which involves a saddle point geometry with a nonlinear central angle, were used to examine the capacity of LEP-type surfaces to describe the kinetics and dynamics of noncollinear reaction paths in polyatomic systems. Analyzing the geometries, vibrational frequencies, curvature along the reaction path (to estimate the tunneling effect and the reaction coordinate-bound modes coupling), and the variational transition- state theory thermal rate constants for the NH//3 + O(**3P) reaction, we found that the "collinear" LEP-type and the "bent" surfaces for this polyatomic system show similar behavior, thus allowing a considerable saving in time and computational effort. This agreement is especially encouraging for this polyatomic system because in the Cs symmetry the reaction proceeds via two electronic states of symmetries **3A prime and **3A double prime , which had to be independently calibrated....

  1. Potential capabilities for compression of information of certain data processing systems

    Science.gov (United States)

    Khodarev, Y. K.; Yevdokimov, V. P.; Pokras, V. M.

    1974-01-01

    This article undertakes to study a generalized block diagram of a data collection and processing system of a spacecraft in which a number of sensors or outputs of scientific instruments are cyclically interrogated by a commutator, methods of writing the supplementary information in a frame on the example of a certain hypothetical telemetry system, and the influence of statistics of number of active channels in a frame on frame compression factor. The separation of the data compression factor of the collection and processing system of spacecraft into two parts used in this work allows determination of the compression factor of an active frame depending not only on the statistics of activity of channels in the telemetry frame, but also on the method of introduction of the additional address and time information to each frame.

  2. High Temperature Antenna Measurement System with GSG or GS Contact Probing Capability

    Science.gov (United States)

    Jordan, Jennifer L.; Scardelletti, Maximilian C.; Ponchak, George E.

    2009-01-01

    Applications that require data transmission at high temperatures are becoming more common due to growing commercial and military needs. Antennas are an indispensable part of these systems and the ability to characterize them at elevated temperatures is quite complicated with little or no information being reported on the subject [1]. This paper describes a measurement system that can characterize planar antennas up 600 C with ground-signal-ground (GSG) or ground-signal (GS) probe contacts. The return loss and radiation patterns of a folded slot antenna (FSA), designed to operate at 5 GHz (no ground plane on back side) and fabricated on an alumina substrate, are presented at room temperature (RT) and 250 C [2]. All measurements were made with Agilent's Precision Network Analyzer (PNA) E8361. The return loss and radiation patterns were also measured on a Styrofoam chuck to illustrate the effect the high temperature measurement system has on the patterns.

  3. Development and Application of Optimal Design Capability for Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Edward S. Rubin; Anand B. Rao; Michael B. Berkenpas

    2007-05-31

    The basic objective of this research is to develop a model to simulate the performance and cost of oxyfuel combustion systems to capture CO{sub 2} at fossil-fuel based power plants. The research also aims at identifying the key parameters that define the performance and costs of these systems, and to characterize the uncertainties and variability associated with key parameters. The final objective is to integrate the oxyfuel model into the existing IECM-CS modeling framework so as to have an analytical tool to compare various carbon management options on a consistent basis.

  4. Capability approach

    DEFF Research Database (Denmark)

    Jensen, Niels Rosendal; Kjeldsen, Christian Christrup

    Lærebogen er den første samlede danske præsentation af den af Amartya Sen og Martha Nussbaum udviklede Capability Approach. Bogen indeholder en præsentation og diskussion af Sen og Nussbaums teoretiske platform. I bogen indgår eksempler fra såvel uddannelse/uddannelsespolitik, pædagogik og omsorg....

  5. An investigation of enhanced capability thermal barrier coating systems for diesel engine components

    Science.gov (United States)

    Holtzman, R. L.; Layne, J. L.; Schechter, B.

    1984-01-01

    Material systems and processes for the development of effective and durable thermal barriers for heavy duty diesel engines were investigated. Seven coating systems were evaluated for thermal conductivity, erosion resistance, corrosion/oxidation resistance, and thermal shock resistance. An advanced coating system based on plasma sprayed particle yttria stabilized zirconia (PS/HYSZ) was judged superior in these tests. The measured thermal conductivity of the selected coating was 0.893 W/m C at 371 C. The PS/HYSZ coating system was applied to the piston crown, fire deck and valves of a single cylinder low heat rejection diesel engine. The coated engine components were tested for 24 hr at power levels from 0.83 MPa to 1.17 MPa brake mean effective pressure. The component coatings survived the engine tests with a minimum of distress. The measured fire deck temperatures decreased 86 C (155 F) on the intake side and 42 C (75 F) on the exhaust side with the coating applied.

  6. Study on heat removal capability concrete cask system with horizontal orientation

    International Nuclear Information System (INIS)

    Nabemoto, Toyonobu; Sakai, Mikio; Fujiwara, Hiroaki; Sakaya, Tadatsugu

    2002-01-01

    In Japan, nuclear fuel cycle, has been promoted, so the recycle fuels formed at nuclear power stations are planned to be processed at reprocessing facilities in future. However, as forming quantities of the recycle fuels are more than reprocessing quantities of the facilities, it is needed to practice a facility (interim storage facility (ISF)) to temporarily store them among the recycle fuels will be reprocessed. The Ishikawajima-Harima Heavy Industries, Co., Ltd. has investigated on vault system and concrete cask system for dry storage system with excellent economical efficiency among various systems on ISFs. As the latter method has a number of actual results in U.S.A., its practice is progressed after some improvements suitable for Japan. When progressing this practice on the latter method on fiscal year 1999, at first, a concrete cask with actual size was experimentally produced, to confirm its productivity. On fiscal year 2000, aiming to establish heat removal evaluation at storage, a thermal load test simulated at the storage was carried out by using this trial product. Here was reported results obtained at a test simulated at repacking carried out on fiscal year 2001. (G.K.)

  7. A Survey of Distributed Capability File Systems and Their Application to Cloud Environments

    Science.gov (United States)

    2014-09-01

    Acknowledgments First and foremost, I would like to thank my amazing, always supportive, selfless, Proverbs 31 Wife, without whom, without a doubt, I... legal right to do his or her self. In the same way ambient authority, as in Linux or another ACL system, allows a process to act with the rights of the

  8. The Making of a Government LSI - From Warfare Capability to Operational System

    Science.gov (United States)

    2015-04-30

    Box Launcher; Systems Engineering Organization ( SEO ); and Flight Test. These program offices operated under the oversight of the Navy-led Joint...C9P02R01-043). Monterey, CA: Naval Postgraduate School. Retrieved from http://oai.dtic.mil/oai/oai?verb=getRecord&metadataPrefix= html &identifier

  9. Modelling and Assessment of the Capabilities of a Supermarket Refrigeration System for the Provision of Regulating Power

    DEFF Research Database (Denmark)

    O'Connell, Niamh; Madsen, Henrik; Pinson, Pierre

    This report presents an analysis of the demand response capabilities of a supermarket refrigeration system, with a particular focus on the suitability of this resource for participation in the regulating power market. An ARMAX model of the system is identified from experimental data, and the model...... are revealed that would complicate the task of devising bids on a conventional power market. These complexities are incurred due to the physical characteristics and constraints of the system as well as the particular characteristics of the control frameworks employed. Simulations considering the provision...... of the system this behaviour can be simplified. These restrictions result in a loss of optimality, but a result in a resource that can be communicated to the market operator in the form of a bid containing a quantity of power for up- or down-regulation and the duration for which the service can be provided....

  10. Design of a control system for self-shielded irradiators with remote access capability

    International Nuclear Information System (INIS)

    Iyengar, R.D.; Verma, P.B.; Prasad, V.V.S.S.; George, Jain R.; Das, Tripti; Deshmukh, D.K.

    2001-01-01

    With self-shielded irradiators like Gamma chambers, and Blood irradiators are being sold by BRIT to customers both within and outside the country, it has become necessary to improve the quality of service without increasing the overheads. The recent advances in the field of communications and information technology can be exploited for improving the quality of service to the customers. A state of the art control system with remote accessibility has been designed for these irradiators enhancing their performance. This will provide an easy access to these units wherever they might be located, through the Internet. With this technology it will now be possible to attend to the needs of the customers, as regards fault rectification, error debugging, system software update, performance testing, data acquisition etc. This will not only reduce the downtime of these irradiators but also reduce the overheads. (author)

  11. Linking Combat Systems Capabilities and Ship Design Through Modeling and Computer Simulation

    Science.gov (United States)

    2013-09-01

    constant at about 9.8 m/s2 (Nave 2013). • L Lift: This is the force that pushes as ship upward due to buoyancy; based upon Archimedes ’ Principle , the...the weight of the water that a ship replaces; more directly, Archimedes ’ principle tells us that it is the weight of the ship, itself, plus its cargo...49 xii THIS PAGE INTENTIONALLY LEFT BLANK xiii LIST OF ACRONYMS AND ABBREVIATIONS ASNET Application System for Naval Evaluation and Testing

  12. An Attitude Control System for a Low-Cost Earth Observation Satellite with Orbit Maintenance Capability

    OpenAIRE

    Steyn, Willem; Hashida, Yoshi

    1999-01-01

    UoSAT-12 is a low-cost minisatellite built by Surrey Satellite Technology Ltd. (SSTL), it is amongst other objectives also a technology demonstrator for high performance attitude control and orbit maintenance on a future constellation of earth observation satellites. The satellite uses a 3-axis reaction wheel configuration and a cold gas propulsion system to enable precise and fast control of its attitude, for example, during orbit manoeuvres. Magnetorquer coils assist the wheels mainly for m...

  13. The Joint Capabilities Integration and Development System: Its Impact on Air Force Acquisition Thirteen Years Later

    Science.gov (United States)

    2016-08-01

    Development System (JCIDS). A fully interoperable and integrated joint force was now on the horizon due to JCIDS, but what was the resultant impact of JCIDS...Force’s stagnating operation and maintenance account faces increasing pressure in the coming years and fielding the right mix of affordable, modernized...from the Director, Operational Test and Evaluation available from the DoD’s webpage and Government Accountability Office (GAO) reports, including

  14. Retaining rooted operations capabilities in footloose supply networks – the system cluster configuration

    DEFF Research Database (Denmark)

    Søberg, Peder Veng; Wæhrens, Brian Vejrum

    2014-01-01

    Original Equipment Manufacturer (OEM) customers feel a need to realize the benefits of outsourcing, while maintaining the development force, which can easily be lost, if too much is outsourced. The paper illustrates the innovative value chain configuration “system cluster”, in which suppliers...... and subcontractors (2. Tier suppliers) get more responsibility and influence, while the OEM customers get the benefits of outsourcing without losing development force. Barriers to reap these benefits are outlined....

  15. Complex Measurement System for Enhancement of Capability for Marine Engines Diagnostics

    Directory of Open Access Journals (Sweden)

    Adam Charchalis

    2013-09-01

    Full Text Available Modern way of machines’ exploitation, due to their high level of structural complication, requires proper level of supervising. That supervising is generally based on detection of pre-failure states and evaluation of machines’ single elements or components condition. In the frame of development of the research capacity of the Mechanical Faculty of Maritime Academy in Gdynia, has been developed the Exploitation Decision Aid System for marine engines exploitation. The system was based on existing test bed with the marine diesel engine Sulzer AL 25/30 as a core element. Modernization of the measurement equipment, significantly extended research capacity, what resulted with improvement of quality, extension of the span, and acceleration of conducted research and development works in the domain of safety of exploitation and diagnostics of marine power plants. Investments in modern measurement apparatus enables also an extension of the range of research and expertise related to engines’ failures and pollutants emission, in relation to broad spectrum of implemented fuels. The goal has been achieved in way of modernization of engine’s monitoring system and stands in Technical Diagnostic Laboratory.

  16. Software and capabilities of the beam position measurement system for Novosibirsk free electron laser

    International Nuclear Information System (INIS)

    Dementyev, E.N.; Medvedko, A.S.; Serednyakov, S.S.; Shubin, E.N.; Tcheskidov, V.G.; Vinokurov, N.A.

    2012-01-01

    The system that measures the electron beam position in the Novosibirsk high power free electron laser has been operating for 8 years and is described in this article. the main part of the system is a number of pick-up electrodes (BPM stations) installed in different parts of the vacuum chamber of the microtron-recuperator. Each BPM (Beam Position Monitoring) station has four buttons with a clear aperture diameter of about 80 mm. Signals from the plates of all BPMs are transmitted by cables outside the shielded hall to the site of location of the measurement electronics. The beam position is determined via simultaneous measurement of the amplitudes of signals induced on the buttons by the beam field. The control software for this system is a single application running on the IBM-PC computer. Communication with the CAMAC crates is realized with the help of the ISP controller, developed at Budker INP. The application can operate in several different regimes. The first regime is a serial poll of all the BPM stations for the purpose of determination of the transverse coordinates of the beam (the main operating regime). The second operation regime is a scanning throughout the delay time range of one of the BPM stations. The third and very useful regime is a poll of the waveform of the BPM button pulses with the frequency of the beam movement and a constant time delay value

  17. New capabilities in the HENP grand challenge storage access system and its application at RHIC

    International Nuclear Information System (INIS)

    Bernardo, L.; Gibbard, B.; Malon, D.; Nordberg, H.; Olson, D.; Porter, R.; Shoshani, A.; Sim, A.; Vaniachine, A.; Wenaus, T.; Wu, K.; Zimmerman, D.

    2000-01-01

    The High Energy and Nuclear Physics Data Access Grand Challenge project has developed an optimizing storage access software system that was prototyped at RHIC. It is currently undergoing integration with the STAR experiment in preparation for data taking that starts in mid-2000. The behavior and lessons learned in the RHIC Mock Data Challenge exercises are described as well as the observed performance under conditions designed to characterize scalability. Up to 250 simultaneous queries were tested and up to 10 million events across 7 event components were involved in these queries. The system coordinates the staging of ''bundles'' of files from the HPSS tape system, so that all the needed components of each event are in disk cache when accessed by the application software. The caching policy algorithm for the coordinated bundle staging is described in the paper. The initial prototype implementation interfaced to the Objectivity/DB. In this latest version, it evolved to work with arbitrary files and use CORBA interfaces to the tag database and file catalog services. The interface to the tag database and the MySQL-based file catalog services used by STAR are described along with the planned usage scenarios

  18. On the Computational Capabilities of Physical Systems. Part 1; The Impossibility of Infallible Computation

    Science.gov (United States)

    Wolpert, David H.; Koga, Dennis (Technical Monitor)

    2000-01-01

    In this first of two papers, strong limits on the accuracy of physical computation are established. First it is proven that there cannot be a physical computer C to which one can pose any and all computational tasks concerning the physical universe. Next it is proven that no physical computer C can correctly carry out any computational task in the subset of such tasks that can be posed to C. This result holds whether the computational tasks concern a system that is physically isolated from C, or instead concern a system that is coupled to C. As a particular example, this result means that there cannot be a physical computer that can, for any physical system external to that computer, take the specification of that external system's state as input and then correctly predict its future state before that future state actually occurs; one cannot build a physical computer that can be assured of correctly 'processing information faster than the universe does'. The results also mean that there cannot exist an infallible, general-purpose observation apparatus, and that there cannot be an infallible, general-purpose control apparatus. These results do not rely on systems that are infinite, and/or non-classical, and/or obey chaotic dynamics. They also hold even if one uses an infinitely fast, infinitely dense computer, with computational powers greater than that of a Turing Machine. This generality is a direct consequence of the fact that a novel definition of computation - a definition of 'physical computation' - is needed to address the issues considered in these papers. While this definition does not fit into the traditional Chomsky hierarchy, the mathematical structure and impossibility results associated with it have parallels in the mathematics of the Chomsky hierarchy. The second in this pair of papers presents a preliminary exploration of some of this mathematical structure, including in particular that of prediction complexity, which is a 'physical computation

  19. Towards Understanding Artifacts in the Clumped Isotope System

    Science.gov (United States)

    Swart, P. K.; Staudigel, P. T.; Murray, S.

    2015-12-01

    The clumped isotope system in carbonates (Δ47) relies on the extraction of CO2 from the carbonate minerals using phosphoric acid. Despite the fact that this method dates back to the original stable isotopic work in the 1950s, there are significant aspects of the fractionation of the 18O/16O (and by inference the ratio of mass 47 to 44) which are not understood. We believe that subtle variations in the isotopic fractionation as a function of temperature, acid density (and acid preparation method), and extraction line design cause variation between the clumped isotope data produced by different laboratories. One of the most obvious of these is difference in reaction temperatures. While most laboratories employ temperatures of between 75 and 90oC, the original method employed a temperature of 25oC. Although various estimate of the difference in fractionation of Δ47 between 25 and 90oC have been made, we have measured significantly different values for dolomites compared to published data. In order to understand this we have performed experiments in sealed Pyrex vessels to measure the exchange between CO2 and 103% phosphoric acid. We have determined there to be significant and measurable changes in the Δ47 of CO2 when exposed to phosphoric acid. This exchange is a function of temperature, time, acid strength, and the surface area of the acid exposed to the CO2. We postulate that, perhaps as a result of the lower reaction rate of dolomite, compared to calcite, that there is greater opportunity for CO2 to exchange with the phosphoric acid as bubbles of CO2 are retained within the acid for longer periods of time. Such a mechanism would predict that well-ordered dolomites will have different fractionation compared to protodolomite. Similar differences might account for different fractionation for other carbonate minerals.

  20. Systems Thinking: A Way to Understand Socio-political Environments

    Science.gov (United States)

    2014-06-13

    oppressed peasantry. After the war started, the guerrilla became a clan to many children and youth who found themselves orphaned or homeless ...gratitude is extended to my classmates in the Local Dynamics of War Scholars Program as well as my thesis committee. My intellectual debt is to the people ...Reference Publication ASCOPE Area, Structures, Capabilities, Organizations, People , Events COG Center of Gravity FM Field Manual GOES Government of El

  1. Risk Management Capability Maturity and Performance of Complex Product and System (CoPS Projects with an Asian Perspective

    Directory of Open Access Journals (Sweden)

    Ren, Y.

    2014-07-01

    Full Text Available Complex Products and Systems (CoPS are high value, technology and engineering-intensive capital goods. The motivation of this study is the persistent high failure rate of CoPS projects, Asian CoPS provider’s weak capability and lack of specific research on CoPS risk management. This paper evaluates risk management maturity level of CoPS projects against a general CoPS risk management capability maturity model (RM-CMM developed by the authors. An Asian based survey was conducted to investigate the value of RM to project performance, and Asian (non-Japanese CoPS implementers’ perceived application of RM practices, their strengths and weaknesses. The survey result shows that higher RM maturity level leads to higher CoPS project performance. It also shows project complexity and uncertainty moderates the relationship between some RM practices and project performance, which implies that a contingency approach should be adopted to manage CoPS risks effectively. In addition, it shows that Asian CoPS implementers are weak in RM process and there are also rooms for improvement in the softer aspects of organizational capabilities and robustness.

  2. Social absorption capability, systems of innovation and manufactured export response to preferential trade incentives

    DEFF Research Database (Denmark)

    Na-Allah, Abdelrasaq; Muchie, Mammo

    2012-01-01

    In many extant analyses of non-reciprocal system of trade preferences, it is typical to focus on the details of market access value of tarrif concessions as explanation for why export beneficiaries may or may not respond to include very often the role that supply related factors can, and do play...... & Opportunity Act apparel trade incentive is used as a classical illustration of this proposition. It is shown that the comparative efficiency of Lesetho, despite emerging from a relatively weak trade performance potential background, in recording the highest level of export success among beneficiaries...

  3. A 2-transistor/1-resistor artificial synapse capable of communication and stochastic learning in neuromorphic systems.

    Science.gov (United States)

    Wang, Zhongqiang; Ambrogio, Stefano; Balatti, Simone; Ielmini, Daniele

    2014-01-01

    Resistive (or memristive) switching devices based on metal oxides find applications in memory, logic and neuromorphic computing systems. Their small area, low power operation, and high functionality meet the challenges of brain-inspired computing aiming at achieving a huge density of active connections (synapses) with low operation power. This work presents a new artificial synapse scheme, consisting of a memristive switch connected to 2 transistors responsible for gating the communication and learning operations. Spike timing dependent plasticity (STDP) is achieved through appropriate shaping of the pre-synaptic and the post synaptic spikes. Experiments with integrated artificial synapses demonstrate STDP with stochastic behavior due to (i) the natural variability of set/reset processes in the nanoscale switch, and (ii) the different response of the switch to a given stimulus depending on the initial state. Experimental results are confirmed by model-based simulations of the memristive switching. Finally, system-level simulations of a 2-layer neural network and a simplified STDP model show random learning and recognition of patterns.

  4. CARDIOVASCULAR EVENTS IN SYSTEMIC LUPUS ERYTHEMATOSUS: MECHANISMS FOR THE ACCELERATED DEVELOPMENT OF ATHEROSCLEROSIS, DIAGNOSIS, CORRECTION CAPABILITIES

    Directory of Open Access Journals (Sweden)

    A. V. Arshinov

    2017-01-01

    Full Text Available Atherosclerosis and its complications are the major cause of late mortality among patients with systemic lupus erythematosus (SLE. SLE and coronary heart disease share common pathophysiological mechanisms associated with systemic and chronic inflammation. At the same time, traditional risk factors, such as hypertension, elderly age, smoking, hypercholesterolemia, obesity, and male sex, cannot fully explain the mechanism for the accelerated development of atherosclerosis in patients with SLE. Specific risk factors, such as its duration, glucocorticoid use, anti-doublestranded (native DNA autoantibodies and antiphospholipid antibodies, create conditions for the accelerated development of atherosclerosis in this group of patients.The available facts indicate that a rheumatologist can reduce the risk of cardiovascular disease (CVD, by controlling the activity of SLE. Traditional CVD risk factors should be also modified with smoking cessation, weight loss, and blood pressure control. It is necessary to keep in mind the role of anti-inflammatory therapy, in particular the positive effect of drugs, such as anti-malarial drugs and mycophenolate mofetil, and the adverse prognostic effect of prolonged glucocorticoid use. Further studies should assist in elaborating effective risk scales and specific therapeutic programs for the prevention and treatment of CVD in patients with SLE. 

  5. Development of an Automated LIBS Analytical Test System Integrated with Component Control and Spectrum Analysis Capabilities

    International Nuclear Information System (INIS)

    Ding Yu; Tian Di; Chen Feipeng; Chen Pengfei; Qiao Shujun; Yang Guang; Li Chunsheng

    2015-01-01

    The present paper proposes an automated Laser-Induced Breakdown Spectroscopy (LIBS) analytical test system, which consists of a LIBS measurement and control platform based on a modular design concept, and a LIBS qualitative spectrum analysis software and is developed in C#. The platform provides flexible interfacing and automated control; it is compatible with different manufacturer component models and is constructed in modularized form for easy expandability. During peak identification, a more robust peak identification method with improved stability in peak identification has been achieved by applying additional smoothing on the slope obtained by calculation before peak identification. For the purpose of element identification, an improved main lines analysis method, which detects all elements on the spectral peak to avoid omission of certain elements without strong spectral lines, is applied to element identification in the tested LIBS samples. This method also increases the identification speed. In this paper, actual applications have been carried out. According to tests, the analytical test system is compatible with components of various models made by different manufacturers. It can automatically control components to get experimental data and conduct filtering, peak identification and qualitative analysis, etc. on spectral data. (paper)

  6. On The Computational Capabilities of Physical Systems. Part 2; Relationship With Conventional Computer Science

    Science.gov (United States)

    Wolpert, David H.; Koga, Dennis (Technical Monitor)

    2000-01-01

    In the first of this pair of papers, it was proven that there cannot be a physical computer to which one can properly pose any and all computational tasks concerning the physical universe. It was then further proven that no physical computer C can correctly carry out all computational tasks that can be posed to C. As a particular example, this result means that no physical computer that can, for any physical system external to that computer, take the specification of that external system's state as input and then correctly predict its future state before that future state actually occurs; one cannot build a physical computer that can be assured of correctly "processing information faster than the universe does". These results do not rely on systems that are infinite, and/or non-classical, and/or obey chaotic dynamics. They also hold even if one uses an infinitely fast, infinitely dense computer, with computational powers greater than that of a Turing Machine. This generality is a direct consequence of the fact that a novel definition of computation - "physical computation" - is needed to address the issues considered in these papers, which concern real physical computers. While this novel definition does not fit into the traditional Chomsky hierarchy, the mathematical structure and impossibility results associated with it have parallels in the mathematics of the Chomsky hierarchy. This second paper of the pair presents a preliminary exploration of some of this mathematical structure. Analogues of Chomskian results concerning universal Turing Machines and the Halting theorem are derived, as are results concerning the (im)possibility of certain kinds of error-correcting codes. In addition, an analogue of algorithmic information complexity, "prediction complexity", is elaborated. A task-independent bound is derived on how much the prediction complexity of a computational task can differ for two different reference universal physical computers used to solve that task

  7. Developing a Frame of Reference for understanding configuration systems

    DEFF Research Database (Denmark)

    Ladeby, Klaes Rohde; Edwards, Kasper

    2008-01-01

    This paper uses the theory of technical systems to develop a frame of reference of product configuration systems. Following a definition of the configuration task, product model and product configuration system the theory of technical systems are presented. Configuration systems are then related...

  8. Use of computerized data acquisition system to auralize NDE data for improved inspection capability

    International Nuclear Information System (INIS)

    Light, Glenn M.; Holt, Amos E.; Polk, Kent D.; Clayton, William T.

    2004-01-01

    Southwest Research Institute has developed computer-aided technology for converting electronic signals generated by conventional nondestructive evaluation (NDE) equipment (i.e., ultrasonic, eddy current, and acoustic emission) into audible information so that the inspector can make use of both the conventional NDE signals (which are often confusing) and the audible information to make a flaw/nonflaw decision. One objective of this work was to develop a computerized data acquisition system that could collect ultrasonic data, perform time dilation of the ultrasonic data, and help develop algorithms. The aural technology has been applied to composite impact damage, composite delamination detection, and corrosion detection. In addition, the aural technology was used to detect and discriminate intergranular stress corrosion cracking. Examples of application of aural NDE technology are described. (author)

  9. X-37 Flight Demonstrator Project: Capabilities for Future Space Transportation System Development

    Science.gov (United States)

    Dumbacher, Daniel L.

    2004-01-01

    The X-37 Approach and Landing Vehicle (ALTV) is an automated (unmanned) spacecraft designed to reduce technical risk in the descent and landing phases of flight. ALTV mission requirements and Orbital Vehicle (OV) technology research and development (R&D) goals are formulated to validate and mature high-payoff ground and flight technologies such as Thermal Protection Systems (TPS). It has been more than three decades since the Space Shuttle was designed and built. Real-world hardware experience gained through the multitude of X-37 Project activities has expanded both Government and industry knowledge of the challenges involved in developing new generations of spacecraft that can fulfill the Vision for Space Exploration.

  10. Evaluation of the 3d Urban Modelling Capabilities in Geographical Information Systems

    Science.gov (United States)

    Dogru, A. O.; Seker, D. Z.

    2010-12-01

    Geographical Information System (GIS) Technology, which provides successful solutions to basic spatial problems, is currently widely used in 3 dimensional (3D) modeling of physical reality with its developing visualization tools. The modeling of large and complicated phenomenon is a challenging problem in terms of computer graphics currently in use. However, it is possible to visualize that phenomenon in 3D by using computer systems. 3D models are used in developing computer games, military training, urban planning, tourism and etc. The use of 3D models for planning and management of urban areas is very popular issue of city administrations. In this context, 3D City models are produced and used for various purposes. However the requirements of the models vary depending on the type and scope of the application. While a high level visualization, where photorealistic visualization techniques are widely used, is required for touristy and recreational purposes, an abstract visualization of the physical reality is generally sufficient for the communication of the thematic information. The visual variables, which are the principle components of cartographic visualization, such as: color, shape, pattern, orientation, size, position, and saturation are used for communicating the thematic information. These kinds of 3D city models are called as abstract models. Standardization of technologies used for 3D modeling is now available by the use of CityGML. CityGML implements several novel concepts to support interoperability, consistency and functionality. For example it supports different Levels-of-Detail (LoD), which may arise from independent data collection processes and are used for efficient visualization and efficient data analysis. In one CityGML data set, the same object may be represented in different LoD simultaneously, enabling the analysis and visualization of the same object with regard to different degrees of resolution. Furthermore, two CityGML data sets

  11. Performance Capabilities of Long-Range UWB-IR TDOA Localization Systems

    Directory of Open Access Journals (Sweden)

    Divya Rao

    2008-02-01

    Full Text Available The theoretical and practical performance limits of a 2D ultrawideband impulse-radio localization system operating in the far field are studied under the assumption that estimates of location are based on time-difference-of-arrival (TDOA measurements. Performance is evaluated in the presence of errors in both the TDOA measurements and the sensor locations. The performance of both optimal (maximum-likelihood and suboptimal location estimation algorithms is studied and compared with the theoretical performance limit defined by the Cramér-Rao lower bound on the variance of unbiased TDOA location estimates. A novel weighted total-least-squares algorithm is introduced that compensates somewhat for errors in sensor positions and reduces the bias in location estimation compared with a widely used weighted least-squares approach. In addition, although target tracking per se is not considered in this paper, performance is evaluated both under the assumption that sequential location estimates are not aggregated as well as under the assumption that some sort of tracker is available to aggregate a sequence of estimates.

  12. Helmet-Mounted Display Research Capabilities of the NASA/Army Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL)

    Science.gov (United States)

    Jacobsen, R. A.; Bivens, C. C.; Rediess, N. A.; Hindson, W. S.; Aiken, E. W.; Aiken, Edwin W. (Technical Monitor)

    1995-01-01

    The Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL) is a UH-60A Black Hawk helicopter that is being modified by the US Army and NASA for flight systems research. The principal systems that are being installed in the aircraft are a Helmet Mounted Display (HMD) and imaging system, and a programmable full authority Research Flight Control System (RFCS). In addition, comprehensive instrumentation of both the rigid body of the helicopter and the rotor system is provided. The paper will describe the capabilities of these systems and their current state of development. A brief description of initial research applications is included. The wide (40 X 60 degree) field-of-view HMD system has been provided by Kaiser Electronics. It can be configured as a monochromatic system for use in bright daylight conditions, a two color system for darker ambients, or a full color system for use in night viewing conditions. Color imagery is achieved using field sequential video and a mechanical color wheel. In addition to the color symbology, high resolution computer-gene rated imagery from an onboard Silicon Graphics Reality Engine Onyx processor is available for research in virtual reality applications. This synthetic imagery can also be merged with real world video from a variety of imaging systems that can be installed easily on the front of the helicopter. These sensors include infrared or tv cameras, or potentially small millimeter wave radars. The Research Flight Control System is being developed for the aircraft by a team of contractors led by Boeing Helicopters. It consists of a full authority high bandwidth fly-by-wire actuators that drive the main rotor swashplate actuators and the tail rotor actuator in parallel. This arrangement allows the basic mechanical flight control system of the Black Hawk to be retained so that the safety pilot can monitor the operation of the system through the action of his own controls. The evaluation pilot will signal the fly

  13. How to define and build an effective cyber threat intelligence capability how to understand, justify and implement a new approach to security

    CERN Document Server

    Dalziel, Henry; Carnall, James

    2014-01-01

    Intelligence-Led Security: How to Understand, Justify and Implement a New Approach to Security is a concise review of the concept of Intelligence-Led Security. Protecting a business, including its information and intellectual property, physical infrastructure, employees, and reputation, has become increasingly difficult. Online threats come from all sides: internal leaks and external adversaries; domestic hacktivists and overseas cybercrime syndicates; targeted threats and mass attacks. And these threats run the gamut from targeted to indiscriminate to entirely accidental. Amo

  14. Development Of Nutrient And Water Recycling Capabilities In Algae Biofuels Production Systems. Final Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Lundquist, Tryg [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States). Civil and Environmental Engineering Dept.; Spierling, Ruth [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Poole, Kyle [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Blackwell, Shelley [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Crowe, Braden [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Hutton, Matt [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Lehr, Corinne [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States). Dept. of Chemistry and Biochemistry

    2018-01-25

    The objective of this project was to develop and demonstrate methods of recycling of water and nutrients for algal biofuels production. Recycling was accomplished both internal to the system and, in a broader sense, through import and reuse of municipal wastewater. Such an integrated system with wastewater input had not been demonstrated previously, and the performance was unknown, particularly in terms of influence of recycling on algal productivity and the practical extent of nutrient recovery from biomass residuals. Through long-term laboratory and pilot research, the project resulted in the following: 1. Bench-scale pretreatment of algal biomass did not sufficiently increase methane yield of nutrient solubilization during anaerobic digestion to warrant incorporation of pre-treatment into the pilot plant. The trial pretreatments were high-pressure orifice homogenization, sonication, and two types of heat treatment. 2. Solubilization of biomass particulate nutrients by lab anaerobic digesters ranged from 20% to nearly 60% for N and 40-65% for P. Subsequent aerobic degradation of the anaerobically digested biomass simulated raceways receiving whole digestate and resulted in an additional 20-55% N solubilization and additional 20% P solubilization. 3. Comparisons of laboratory and pilot digesters showed that laboratory units were reasonable proxies for pilot-scale. 4. Pilot-scale anaerobic digesters were designed, installed, and operated to digest algal biomass. Nutrient re-solubilization by the digesters was monitored and whole digestate was successfully used as a fertilizer in pilot algae raceways. 5. Unheated, unmixed digesters achieved greater methane yield and nutrient solubilization than heated, mixed digesters, presumably due to longer the solids residence times in unmixed digesters. The unmixed, unheated pilot digesters yielded 0.16 LCH4/g volatile solids (VS) introduced with 0.15 g VS/L-d organic loading and 16oC average temperature. A

  15. Recent Developments in the Design, Capabilities and Autonomous Operations of a Lightweight Surface Manipulation System and Test-bed

    Science.gov (United States)

    Dorsey, John T.; Jones, Thomas C.; Doggett, W. R.; Brady, Jeffrey S.; Berry, Felecia C.; Ganoe, George G.; Anderson, Eric; King, Bruce D.; Mercer, David C.

    2011-01-01

    The first generation of a versatile high performance device for performing payload handling and assembly operations on planetary surfaces, the Lightweight Surface Manipulation System (LSMS), has been designed and built. Over the course of its development, conventional crane type payload handling configurations and operations have been successfully demonstrated and the range of motion, types of operations and the versatility greatly expanded. This enhanced set of 1st generation LSMS hardware is now serving as a laboratory test-bed allowing the continuing development of end effectors, operational techniques and remotely controlled and automated operations. This paper describes the most recent LSMS and test-bed development activities, that have focused on two major efforts. The first effort was to complete a preliminary design of the 2nd generation LSMS that has the capability for limited mobility and can reposition itself between lander decks, mobility chassis, and fixed base locations. A major portion of this effort involved conducting a study to establish the feasibility of, and define, the specifications for a lightweight cable-drive waist joint. The second effort was to continue expanding the versatility and autonomy of large planetary surface manipulators using the 1st generation LSMS as a test-bed. This has been accomplished by increasing manipulator capabilities and efficiencies through both design changes and tool and end effector development. A software development effort has expanded the operational capabilities of the LSMS test-bed to include; autonomous operations based on stored paths, use of a vision system for target acquisition and tracking, and remote command and control over a communications bridge.

  16. Telematics Options and Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Hodge, Cabell [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-05

    This presentation describes the data tracking and analytical capabilities of telematics devices. Federal fleet managers can use the systems to keep their drivers safe, maintain a fuel efficient fleet, ease their reporting burden, and save money. The presentation includes an example of how much these capabilities can save fleets.

  17. Autonomous Co-operation and Control in Complex Adaptive Logistic Systems - Contributions and Limitations for the Innovation Capability of International Supply Networks

    Science.gov (United States)

    Hülsmann, Michael; Cordes, Philip

    This paper aims to analyze the potential contributions of the organization principle autonomous co-operation and control to the innovation capabilities of logistics systems and their sub-systems like single organizations. Therefore, the concept of Complex Adaptive Logistics Systems (CALS) will be introduced and the essentiality of the heterogeneity of the elements within logistics systems for their innovation capabilities will be emphasized. One possible driver for homogeneity is the so-called dominant logic.

  18. The Ultimate Big Data Enterprise Initiative: Defining Functional Capabilities for an International Information System (IIS) for Orbital Space Data (OSD)

    Science.gov (United States)

    Raygan, R.

    Global collaboration in support of an International Information System (IIS) for Orbital Space Data (OSD) literally requires a global enterprise. As with many information technology enterprise initiatives attempting to coral the desires of business with the budgets and limitations of technology, Space Situational Awareness (SSA) includes many of the same challenges: 1) Adaptive / Intuitive Dash Board that facilitates User Experience Design for a variety of users. 2) Asset Management of hundreds of thousands of objects moving at thousands of miles per hour hundreds of miles in space. 3) Normalization and integration of diverse data in various languages, possibly hidden or protected from easy access. 4) Expectations of near real-time information availability coupled with predictive analysis to affect decisions before critical points of no return, such as Space Object Conjunction Assessment (CA). 5) Data Ownership, management, taxonomy, and accuracy. 6) Integrated metrics and easily modified algorithms for "what if" analysis. This paper proposes an approach to define the functional capabilities for an IIS for OSD. These functional capabilities not only address previously identified gaps in current systems but incorporate lessons learned from other big data, enterprise, and agile information technology initiatives that correlate to the space domain. Viewing the IIS as the "data service provider" allows adoption of existing information technology processes which strengthen governance and ensure service consumers certain levels of service dependability and accuracy.

  19. Understanding ecohydrological connectivity in savannas: A system dynamics modeling approach

    Science.gov (United States)

    Ecohydrological connectivity is a system-level property that results from the linkages in the networks of water transport through ecosystems, by which feedback effects and other emergent system behaviors may be generated. We created a systems dynamic model that represents primary ecohydrological net...

  20. Foundation of a Knowledge Representation System for Image Understanding.

    Science.gov (United States)

    1980-10-01

    the tasks of the system is also basic in systems that use complete indexing, or Conniver, or Lisp. Systems like KRL [11], on the other hand, have a...Winograd, T., "An Overview of KRL , a Knowledge Representation Language," Cogn. Science, pp. 13-45, 1977. [12] Zadeh, L.A., "PRUF - A Memory

  1. Understanding and Improving the Performance Consistency of Distributed Computing Systems

    NARCIS (Netherlands)

    Yigitbasi, M.N.

    2012-01-01

    With the increasing adoption of distributed systems in both academia and industry, and with the increasing computational and storage requirements of distributed applications, users inevitably demand more from these systems. Moreover, users also depend on these systems for latency and throughput

  2. Emergent nested systems a theory of understanding and influencing complex systems as well as case studies in urban systems

    CERN Document Server

    Walloth, Christian

    2016-01-01

    This book presents a theory as well as methods to understand and to purposively influence complex systems. It suggests a theory of complex systems as nested systems, i. e. systems that enclose other systems and that are simultaneously enclosed by even other systems. According to the theory presented, each enclosing system emerges through time from the generative activities of the systems they enclose. Systems are nested and often emerge unplanned, and every system of high dynamics is enclosed by a system of slower dynamics. An understanding of systems with faster dynamics, which are always guided by systems of slower dynamics, opens up not only new ways to understanding systems, but also to effectively influence them. The aim and subject of this book is to lay out these thoughts and explain their relevance to the purposive development of complex systems, which are exemplified in case studies from an urban system. The interested reader, who is not required to be familiar with system-theoretical concepts or wit...

  3. Understanding sustainability from an exergetic frame in complex adaptive systems

    International Nuclear Information System (INIS)

    Aguilar Hernandez, Glem Alonso

    2017-01-01

    The concept of sustainability was developed from thermodynamic properties applied to complex adaptive systems. The origins of the perception about sustainable development and limitation in its application to analyze the interaction between a system and its surroundings were described. The properties of a complex adaptive system were taken as basis to determine how a system can to be affected by the resources restriction and irreversibility of the processes. The complex adaptive system was understood using the first and second law of thermodynamics, generating a conceptual framework to define the sustainability of a system. The contributions developed by exergy were shown to analyze the sustainability of systems in an economic, social and environmental context [es

  4. Brief Communication: Understanding disasters and early-warning systems

    Science.gov (United States)

    Castaños, H.; Lomnitz, C.

    2014-12-01

    This paper discusses some methodological questions on understanding disasters. Destructive earthquakes continue to claim thousands of lives. Tsunamis may be caused by recoil of the upper plate. Darwin's twin-epicenter hypothesis is applied to a theory of tsunamis. The ergodicity hypothesis may help to estimate the return periods of extremely rare events. A social science outline on the causation of the Tôhoku nuclear disaster is provided.

  5. The DoD's High Performance Computing Modernization Program - Ensuing the National Earth Systems Prediction Capability Becomes Operational

    Science.gov (United States)

    Burnett, W.

    2016-12-01

    The Department of Defense's (DoD) High Performance Computing Modernization Program (HPCMP) provides high performance computing to address the most significant challenges in computational resources, software application support and nationwide research and engineering networks. Today, the HPCMP has a critical role in ensuring the National Earth System Prediction Capability (N-ESPC) achieves initial operational status in 2019. A 2015 study commissioned by the HPCMP found that N-ESPC computational requirements will exceed interconnect bandwidth capacity due to the additional load from data assimilation and passing connecting data between ensemble codes. Memory bandwidth and I/O bandwidth will continue to be significant bottlenecks for the Navy's Hybrid Coordinate Ocean Model (HYCOM) scalability - by far the major driver of computing resource requirements in the N-ESPC. The study also found that few of the N-ESPC model developers have detailed plans to ensure their respective codes scale through 2024. Three HPCMP initiatives are designed to directly address and support these issues: Productivity Enhancement, Technology, Transfer and Training (PETTT), the HPCMP Applications Software Initiative (HASI), and Frontier Projects. PETTT supports code conversion by providing assistance, expertise and training in scalable and high-end computing architectures. HASI addresses the continuing need for modern application software that executes effectively and efficiently on next-generation high-performance computers. Frontier Projects enable research and development that could not be achieved using typical HPCMP resources by providing multi-disciplinary teams access to exceptional amounts of high performance computing resources. Finally, the Navy's DoD Supercomputing Resource Center (DSRC) currently operates a 6 Petabyte system, of which Naval Oceanography receives 15% of operational computational system use, or approximately 1 Petabyte of the processing capability. The DSRC will

  6. A small-animal imaging system capable of multipinhole circular/helical SPECT and parallel-hole SPECT

    International Nuclear Information System (INIS)

    Qian Jianguo; Bradley, Eric L.; Majewski, Stan; Popov, Vladimir; Saha, Margaret S.; Smith, Mark F.; Weisenberger, Andrew G.; Welsh, Robert E.

    2008-01-01

    We have designed and built a small-animal single-photon emission computed tomography (SPECT) imaging system equipped with parallel-hole and multipinhole collimators and capable of circular or helical SPECT. Copper-beryllium parallel-hole collimators suitable for imaging the ∼35 keV photons from the decay of 125 I have been built and installed to achieve useful spatial resolution over a range of object-detector distances and to reduce imaging time on our dual-detector array. To address the resolution limitations in the parallel-hole SPECT and the sensitivity and limited field of view of single-pinhole SPECT, we have incorporated multipinhole circular and helical SPECT in addition to expanding the parallel-hole SPECT capabilities. The pinhole SPECT system is based on a 110 mm diameter circular detector equipped with a pixellated NaI(Tl) scintillator array (1x1x5 mm 3 /pixel). The helical trajectory is accomplished by two stepping motors controlling the rotation of the detector-support gantry and displacement of the animal bed along the axis of rotation of the gantry. Results obtained in SPECT studies of various phantoms show an enlarged field of view, very good resolution and improved sensitivity using multipinhole circular or helical SPECT. Collimators with one, three and five, 1-mm-diameter pinholes have been implemented and compared in these tests. Our objective is to develop a system on which one may readily select a suitable mode of either parallel-hole SPECT or pinhole circular or helical SPECT for a variety of small animal imaging applications

  7. The Implementation of Lesson Study to Strengthen Students: Understanding Participation and Application Capabilities in History Education Research Method on Topic Research and Development

    Science.gov (United States)

    Towaf, Siti Malikhah

    2016-01-01

    Learning can be observed from three-dimensions called: effectiveness, efficiency, and attractiveness of learning. Careful study carried out by analyzing the learning elements of the system are: input, process, and output. Lesson study is an activity designed and implemented as an effort to improve learning in a variety of dimensions. "Lesson…

  8. Understanding Enterprise Systems' Impact(s) on Business Relationships

    Science.gov (United States)

    Ekman, Peter; Thilenius, Peter

    Enterprise systems (ESs), i.e. standardized applications supplied from software vendors such as SAP or Oracle, have been extensively employed by companies during the last decade. Today all Fortune 500 companies have, or are in the process of installing, this kind of information system (Seddon et al. 2003). A wide-spread denotation for these applications is enterprise resource planning (ERP) systems. But the broad utilization use of these software packages in business is rendering this labelling too narrow (Davenport 2000).

  9. An Innovative Control Strategy to Improve the Fault Ride-Through Capability of DFIGs Based on Wind Energy Conversion Systems

    Directory of Open Access Journals (Sweden)

    Vandai Le

    2016-01-01

    Full Text Available An innovative control strategy is proposed for enhancing the low voltage ride-through (LVRT capability of a doubly fed induction generator based on wind energy conversion systems (DFIG-WECS. Within the proposed control method, the current control loops of the rotor side converter (RSC are developed based on passivity theory. The control scheme for the grid side converter (GSC is designed based on a two-term approach to keep the DC-link voltage close to a given value. The first term based on the maximal voltage of GSC is introduced in the GSC control loops as a reference reactive current. The second one reflecting the instantaneous unbalanced power flow between the RSC and GSC is also introduced in the GSC control loops as a disturbance considering the instantaneous power of the grid filter to compensate the instantaneous rotor power. The effectiveness of the proposed control strategy is verified via time domain simulation of a 2.0 MW-575 V DFIG-WECS using PSCAD/EMTP. Simulation results show that the control of the DFIG with the proposed approach can improve the LVRT capability better than with the conventional one.

  10. Intelligent network video understanding modern video surveillance systems

    CERN Document Server

    Nilsson, Fredrik

    2008-01-01

    Offering ready access to the security industry's cutting-edge digital future, Intelligent Network Video provides the first complete reference for all those involved with developing, implementing, and maintaining the latest surveillance systems. Pioneering expert Fredrik Nilsson explains how IP-based video surveillance systems provide better image quality, and a more scalable and flexible system at lower cost. A complete and practical reference for all those in the field, this volume:Describes all components relevant to modern IP video surveillance systemsProvides in-depth information about ima

  11. Understanding Cooperative Learning in Context-aware Recommender Systems

    DEFF Research Database (Denmark)

    Jiang, Na; Tan, Chee-Wee; Wang, Weiquan

    2017-01-01

    Context-Aware Recommender Systems (CARSs) are becoming commonplace. Yet, there is a paucity of studies that investigates how such systems could affect usage behavior from a user-system interaction perspective. Building on the Social Interdependence Theory (SIT), we construct a research model...... of users’ promotive interaction with CARSs, which in turn, dictates the performance of such recommender systems. Furthermore, we introduce scrutability features as design interventions that can be harnessed by developers to mitigate the impact of users’ promotive interaction on the performance of CARSs....

  12. High School Students' Understanding of the Human Body System

    Science.gov (United States)

    Assaraf, Orit Ben-Zvi; Dodick, Jeff; Tripto, Jaklin

    2013-01-01

    In this study, 120 tenth-grade students from 8 schools were examined to determine the extent of their ability to perceive the human body as a system after completing the first stage in their biology curriculum--"The human body, emphasizing homeostasis". The students' systems thinking was analyzed according to the STH thinking model, which roughly…

  13. Understanding the Modularity of Socio-technical Production Systems

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff

    , material and process aspects, the modularity of a socio-technical system can be understood as an entanglement of product, process, organizational and institutional modularity dimension. The developed theoretical framework is used for analyzing the modularity of three different production systems the pre-modern......, modern and post-modern construction practices....

  14. Understanding ERP system implementation in a hospital by analysing stakeholders

    NARCIS (Netherlands)

    Boonstra, A.; Govers, M.

    Implementing enterprise resource planning (ERP) systems requires significant organisational, as well as technical, changes. These will affect stakeholders with varying perspectives and interests in the system. This is particularly the case in health care, as a feature of this sector is that

  15. Characterizing the Trade Space Between Capability and Complexity in Next Generation Cloud and Precipitation Observing Systems Using Markov Chain Monte Carlos Techniques

    Science.gov (United States)

    Xu, Z.; Mace, G. G.; Posselt, D. J.

    2017-12-01

    As we begin to contemplate the next generation atmospheric observing systems, it will be critically important that we are able to make informed decisions regarding the trade space between scientific capability and the need to keep complexity and cost within definable limits. To explore this trade space as it pertains to understanding key cloud and precipitation processes, we are developing a Markov Chain Monte Carlo (MCMC) algorithm suite that allows us to arbitrarily define the specifications of candidate observing systems and then explore how the uncertainties in key retrieved geophysical parameters respond to that observing system. MCMC algorithms produce a more complete posterior solution space, and allow for an objective examination of information contained in measurements. In our initial implementation, MCMC experiments are performed to retrieve vertical profiles of cloud and precipitation properties from a spectrum of active and passive measurements collected by aircraft during the ACE Radiation Definition Experiments (RADEX). Focusing on shallow cumulus clouds observed during the Integrated Precipitation and Hydrology EXperiment (IPHEX), observing systems in this study we consider W and Ka-band radar reflectivity, path-integrated attenuation at those frequencies, 31 and 94 GHz brightness temperatures as well as visible and near-infrared reflectance. By varying the sensitivity and uncertainty of these measurements, we quantify the capacity of various combinations of observations to characterize the physical properties of clouds and precipitation.

  16. Final Technical Report - 300°C Capable Electronics Platform and Temperature Sensor System For Enhanced Geothermal Systems

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Cheng-Po; Shaddock, David; Sandvik, Peter; Saia, Rich; Amita Patil, Alexey Vert; Zhang, Tan

    2012-11-30

    A silicon carbide (SiC) based electronic temperature sensor prototype has been demonstrated to operate at 300°C. We showed continuous operation of 1,000 hours with SiC operational amplifier and surface mounted discreet resistors and capacitors on a ceramic circuit board. This feasibility demonstration is a major milestone in the development of high temperature electronics in general and high temperature geothermal exploration and well management tools in particular. SiC technology offers technical advantages that are not found in competing technologies such as silicon-on-insulator (SOI) at high temperatures of 200°C to 300°C and beyond. The SiC integrated circuits and packaging methods can be used in new product introduction by GE Oil and Gas for high temperature down-hole tools. The existing SiC fabrication facility at GE is sufficient to support the quantities currently demanded by the marketplace, and there are other entities in the United States and other countries capable of ramping up SiC technology manufacturing. The ceramic circuit boards are different from traditional organic-based electronics circuit boards, but the fabrication process is compatible with existing ceramic substrate manufacturing. This project has brought high temperature electronics forward, and brings us closer to commercializing tools that will enable and reduce the cost of enhanced geothermal technology to benefit the public in terms of providing clean renewable energy at lower costs.

  17. Comparison of capability between two versions of reactor transient diagnosis expert system 'DISKET' programmed in different languages

    International Nuclear Information System (INIS)

    Yokobayashi, Masao; Yoshida, Kazuo

    1991-01-01

    An expert system DISKET has been developed at JAERI to apply knowledge engineering techniques to the transient diagnosis of nuclear power plant. The first version of DISKET programmed in UTILISP has been developed with the main-frame computer FACOM M-780 at JAERI. The LISP language is not suitable for on-line diagnostic systems because it is highly dependent on computer to be used and requires a large computer memory. The large mainframe computer is also not suitable because there are various restrictions as a multi-user computer system. The second version of DISKET for a practical use has been developed in FORTRAN to realize on-line real time diagnoses with limited computer resources. These two versions of DISKET with the same knowledge base have been compared in running capability, and it has been found that the LISP version of DISKET needs more than two times of memory and CPU time of FORTRAN version. From this result, it is shown that this approach is a practical one to develop expert systems for on-line real time diagnosis of transients with limited computer resources. (author)

  18. Understanding similarity of groundwater systems with empirical copulas

    Science.gov (United States)

    Haaf, Ezra; Kumar, Rohini; Samaniego, Luis; Barthel, Roland

    2016-04-01

    Within the classification framework for groundwater systems that aims for identifying similarity of hydrogeological systems and transferring information from a well-observed to an ungauged system (Haaf and Barthel, 2015; Haaf and Barthel, 2016), we propose a copula-based method for describing groundwater-systems similarity. Copulas are an emerging method in hydrological sciences that make it possible to model the dependence structure of two groundwater level time series, independently of the effects of their marginal distributions. This study is based on Samaniego et al. (2010), which described an approach calculating dissimilarity measures from bivariate empirical copula densities of streamflow time series. Subsequently, streamflow is predicted in ungauged basins by transferring properties from similar catchments. The proposed approach is innovative because copula-based similarity has not yet been applied to groundwater systems. Here we estimate the pairwise dependence structure of 600 wells in Southern Germany using 10 years of weekly groundwater level observations. Based on these empirical copulas, dissimilarity measures are estimated, such as the copula's lower- and upper corner cumulated probability, copula-based Spearman's rank correlation - as proposed by Samaniego et al. (2010). For the characterization of groundwater systems, copula-based metrics are compared with dissimilarities obtained from precipitation signals corresponding to the presumed area of influence of each groundwater well. This promising approach provides a new tool for advancing similarity-based classification of groundwater system dynamics. Haaf, E., Barthel, R., 2015. Methods for assessing hydrogeological similarity and for classification of groundwater systems on the regional scale, EGU General Assembly 2015, Vienna, Austria. Haaf, E., Barthel, R., 2016. An approach for classification of hydrogeological systems at the regional scale based on groundwater hydrographs EGU General Assembly

  19. CATHARE2 V1.4 capability to simulate the performance of isolation condenser systems with thermal valve

    International Nuclear Information System (INIS)

    Meloni, P.

    2001-01-01

    ENEA (Italy) in co-operation with CEA (France) has carried out an R and D activity aimed at increasing the reliability of Decay Heat Removal (DHR) passive systems that implement in-pool heat exchangers. The main outcome reached was the definition of a device, called Thermal Valve (TV), able to avoid the installation of mechanical valve on the primary circuit, thus reducing thermalmechanical constrains and thermal-hydraulic instabilities. This paper presents a preliminary assessment performed with CATHARE of this innovative device. In the first part the code capability to simulate in-pool heat exchangers is verified against experimental data of the PANDA facility, that are available within the frame of the ISP 42. In the second part a CATHARE calculation showing the performances of the PANDA passive condenser with TV (start-up and shutdown) is described.(author)

  20. The James Webb Space Telescope's Plan for Operations and Instrument Capabilities for Observations in the Solar System

    Science.gov (United States)

    Milam, Stefanie N.; Stansberry, John A.; Sonneborn, George; Thomas, Cristina

    2016-01-01

    The James Webb Space Telescope (JWST) is optimized for observations in the near- and mid-infrared and will provide essential observations for targets that cannot be conducted from the ground or other missions during its lifetime. The state-of-the-art science instruments, along with the telescope's moving target tracking, will enable the infrared study, with unprecedented detail, for nearly every object (Mars and beyond) in the Solar System. The goals of this special issue are to stimulate discussion and encourage participation in JWST planning among members of the planetary science community. Key science goals for various targets, observing capabilities for JWST, and highlights for the complementary nature with other missions/observatories are described in this paper.

  1. HOW TO DEAL WITH WASTE ACCEPTANCE UNCERTAINTY USING THE WASTE ACCEPTANCE CRITERIA FORECASTING AND ANALYSIS CAPABILITY SYSTEM (WACFACS)

    International Nuclear Information System (INIS)

    Redus, K. S.; Hampshire, G. J.; Patterson, J. E.; Perkins, A. B.

    2002-01-01

    The Waste Acceptance Criteria Forecasting and Analysis Capability System (WACFACS) is used to plan for, evaluate, and control the supply of approximately 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous wastes from over 60 environmental restoration projects between FY02 through FY10 to the Oak Ridge Environmental Management Waste Management Facility (EMWMF). WACFACS is a validated decision support tool that propagates uncertainties inherent in site-related contaminant characterization data, disposition volumes during EMWMF operations, and project schedules to quantitatively determine the confidence that risk-based performance standards are met. Trade-offs in schedule, volumes of waste lots, and allowable concentrations of contaminants are performed to optimize project waste disposition, regulatory compliance, and disposal cell management

  2. HOW TO DEAL WITH WASTE ACCEPTANCE UNCERTAINTY USING THE WASTE ACCEPTANCE CRITERIA FORECASTING AND ANALYSIS CAPABILITY SYSTEM (WACFACS)

    Energy Technology Data Exchange (ETDEWEB)

    Redus, K. S.; Hampshire, G. J.; Patterson, J. E.; Perkins, A. B.

    2002-02-25

    The Waste Acceptance Criteria Forecasting and Analysis Capability System (WACFACS) is used to plan for, evaluate, and control the supply of approximately 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous wastes from over 60 environmental restoration projects between FY02 through FY10 to the Oak Ridge Environmental Management Waste Management Facility (EMWMF). WACFACS is a validated decision support tool that propagates uncertainties inherent in site-related contaminant characterization data, disposition volumes during EMWMF operations, and project schedules to quantitatively determine the confidence that risk-based performance standards are met. Trade-offs in schedule, volumes of waste lots, and allowable concentrations of contaminants are performed to optimize project waste disposition, regulatory compliance, and disposal cell management.

  3. Capabilities Composition (Briefing Charts)

    Science.gov (United States)

    2009-04-22

    and support , , processes (including ITIL v3) • Understanding of Governance is still evolving Engineering Acquisition and Operational Governance...L – Logistics • NC – Net-Centric • CPM – Capability Portfolio Management • ITIL v3 – Information Technology • ONR – Office of Naval Research

  4. Improving transportation systems management and operations (TSM&O), capability maturity model workshop white paper : systems and technology.

    Science.gov (United States)

    2015-04-01

    Research done through the Second Strategic Highway Research Program (SHRP 2) determined : that agencies with the most effective transportation systems management and operations : (TSM&O) activities were differentiated not by budgets or technical skil...

  5. MBO works for managers who understand, apply system.

    Science.gov (United States)

    McConkey, D D

    1979-09-01

    Where MBO has suceeded, managers thoroughly understood, planned, and adapted the system to their organization's needs. Informed managers in nonprofit organizations can avoid the common mistakes made in business and industry in the 25 years since MBO was first adopted.

  6. Understanding Information Systems Integration Deficiencies in Mergers and Acquisitions

    DEFF Research Database (Denmark)

    Henningsson, Stefan; Kettinger, William J.

    2017-01-01

    Information systems (IS) integration is a critical challenge for value-creating mergers and acquisitions. Appropriate design and implementation of IS integration is typically a precondition for enabling a majority of the anticipated business benefits of a combined organization. Often...

  7. Solar photovoltaic power generation system and understanding of green energy

    International Nuclear Information System (INIS)

    Yoo, Chun Sik

    2004-03-01

    This book introduces sunlight generation system and green energy, which includes new and renewable energy such as photovoltaic power generation, solar thermal, wind power, bio energy, waste energy, geothermal energy, ocean energy and fuel cell photovoltaic industry like summary, technology trend, market trend, development strategy of the industry in Korea, and other countries, design of photovoltaic power generation system supporting policy and related business of new and renewable energy.

  8. Collaborative Research: Towards Advanced Understanding and Predictive Capability of Climate Change in the Arctic Using a High-Resolution Regional Arctic Climate Model

    Energy Technology Data Exchange (ETDEWEB)

    Cassano, John [Principal Investigator

    2013-06-30

    The primary research task completed for this project was the development of the Regional Arctic Climate Model (RACM). This involved coupling existing atmosphere, ocean, sea ice, and land models using the National Center for Atmospheric Research (NCAR) Community Climate System Model (CCSM) coupler (CPL7). RACM is based on the Weather Research and Forecasting (WRF) atmospheric model, the Parallel Ocean Program (POP) ocean model, the CICE sea ice model, and the Variable Infiltration Capacity (VIC) land model. A secondary research task for this project was testing and evaluation of WRF for climate-scale simulations on the large pan-Arctic model domain used in RACM. This involved identification of a preferred set of model physical parameterizations for use in our coupled RACM simulations and documenting any atmospheric biases present in RACM.

  9. Prognostic capability of different liver disease scoring systems for prediction of early mortality after transjugular intrahepatic portosystemic shunt creation.

    Science.gov (United States)

    Gaba, Ron C; Couture, Patrick M; Bui, James T; Knuttinen, M Grace; Walzer, Natasha M; Kallwitz, Eric R; Berkes, Jamie L; Cotler, Scott J

    2013-03-01

    To compare the performance of various liver disease scoring systems in predicting early mortality after transjugular intrahepatic portosystemic shunt (TIPS) creation. In this single-institution retrospective study, eight scoring systems were used to grade liver disease in 211 patients (male-to-female ratio = 131:80; mean age, 54 y) before TIPS creation from 1999-2011. Scoring systems included bilirubin level, Child-Pugh (CP) score, Model for End-Stage Liver Disease (MELD) and Model for End-Stage Liver Disease sodium (MELD-Na) score, Emory score, prognostic index (PI), Acute Physiology and Chronic Health Evaluation (APACHE) 2 score, and Bonn TIPS early mortality (BOTEM) score. Medical record review was used to identify 30-day and 90-day clinical outcomes. The relationship of scoring parameters with mortality outcomes was assessed with multivariate analysis, and the relative ability of systems to predict mortality after TIPS creation was evaluated by comparing area under receiver operating characteristic (AUROC) curves. TIPS were successfully created for variceal hemorrhage (n = 121), ascites (n = 72), hepatic hydrothorax (n = 15), and portal vein thrombosis (n = 3). All scoring systems had a significant association with 30-day and 90-day mortality (P<.050 in each case) on multivariate analysis. Based on 30-day and 90-day AUROC, MELD (0.878, 0.816) and MELD-Na (0.863, 0.823) scores had the best capability to predict early mortality compared with bilirubin (0.786, 0.749), CP (0.822, 0.771), Emory (0.786, 0.681), PI (0.854, 0.760), APACHE 2 (0.836, 0.735), and BOTEM (0.798, 0.698), with statistical superiority over bilirubin, Emory, and BOTEM scores. Several liver disease scoring systems have prognostic value for early mortality after TIPS creation. MELD and MELD-Na scores most effectively predict survival after TIPS creation. Copyright © 2013. Published by Elsevier Inc.

  10. Understanding Hawking radiation in the framework of open quantum systems

    International Nuclear Information System (INIS)

    Yu Hongwei; Zhang Jialin

    2008-01-01

    We study the Hawking radiation in the framework of open quantum systems by examining the time evolution of a detector (modeled by a two-level atom) interacting with vacuum massless scalar fields. The dynamics of the detector is governed by a master equation obtained by tracing over the field degrees of freedom from the complete system. The nonunitary effects are studied by analyzing the time behavior of a particular observable of the detector, i.e., its admissible state, in the Unruh, Hartle-Hawking, as well as Boulware vacua outside a Schwarzschild black hole. We find that the detector in both the Unruh and Hartle-Hawking vacua would spontaneously excite with a nonvanishing probability the same as what one would obtain if there is thermal radiation at the Hawking temperature from the black hole, thus reproducing the basic results concerning the Hawking effect in the framework of open quantum systems

  11. A Framework for Identifying and Understanding Enterprise Systems Benefits

    DEFF Research Database (Denmark)

    Schubert, Petra; Williams, Susan P.

    2011-01-01

    Purpose – Identifying the benefits arising from implementations of enterprise systems and realizing business value remains a significant challenge for both research and industry. This paper aims to consolidate previous work. It presents a framework for investigating enterprise systems benefits...... and business change, which addresses the identified limitations of previous research and provides a more detailed analysis of benefits and their contextual variation. Design/methodology/approach – Drawing on data gathered from 31 real-world organizations (case studies) of differing size, maturity, and industry...

  12. Understanding and Advancing Campus Sustainability Using a Systems Framework

    Science.gov (United States)

    Posner, Stephen M.; Stuart, Ralph

    2013-01-01

    Purpose: University campuses behave as complex systems, and sustainability in higher education is best seen as an emergent quality that arises from interactions both within an institution and between the institution and the environmental and social contexts in which it operates. A framework for strategically prioritizing campus sustainability work…

  13. Matrix Models – An Approach to Understand Complex Systems

    Indian Academy of Sciences (India)

    Matrices with random matrix elements appear to have applications in physics, mathematics, bi- ology, telecommunications, etc. In fact, experi- mental data of many complex systems, such as the spacing distribution of energy level spectra of heavy nuclei, and the distribution of the non- real zeros of the Riemann zeta function ...

  14. Model systems for understanding absorption tuning by opsin proteins

    DEFF Research Database (Denmark)

    Nielsen, Mogens Brøndsted

    2009-01-01

    This tutorial review reports on model systems that have been synthesised and investigated for elucidating how opsin proteins tune the absorption of the protonated retinal Schiff base chromophore. In particular, the importance of the counteranion is highlighted. In addition, the review advocates...

  15. Family Counseling Interventions: Understanding Family Systems and the Referral Process.

    Science.gov (United States)

    McWhirter, Ellen Hawley; And Others

    1993-01-01

    This article describes concepts underlying the idea of the "family as a system"; compares and contrasts four approaches to family therapy (those of Virginia Satir, Jay Haley, Murray Bowen, and Salvador Minuchin); and offers suggestions to teachers referring parents for family counseling. (DB)

  16. Understanding regional metabolism for a sustainable development of urban systems.

    Science.gov (United States)

    Baccini, P

    1996-06-01

    Cities are the most complex forms of settlements which man has built in the course of his cultural development. Their "metabolism" is connected with the world economy and is run mainly by fossil energy carriers. Up to now there are no validated models for the evaluation of a sustainable development of urban regions.The guidelines for a "sustainable development" suggest the reduction of resource consumption. The article is concerned with the problem of how the "sustainable-development concept" can be transformed from a global to a regional scale. In urban settlements the strategy of final storage should be applied. By this, the subsystem waste management can be transformed within 10 to 15 years to a "sustainable status".With regard to the system "agronomy", the article concludes that agriculture in urban systems should focus on food production instead of promoting reduction of food production in favour of energy plants, which is not a suitable strategy.The main problems are the energy carriers. Transformation to a "sustainble status" is only possible by a reconstruction of the urban system, i.e. of buildings and the transportation network. The rate determining step in achieving such a status is the change in the fabric of buildings and in the type of transportation networks. The reconstruction of an urban system needs, mainly for economical reasons, a time period of two generations.

  17. Using control systems analysis and design concepts to understand ...

    African Journals Online (AJOL)

    Results from related clinical trials are cited through out this paper in order to demonstrate how control theoretic and clinical studies can complement each other. Keywords: HIV/AIDS mathematical models, control systems analysis, controllability, identifiability, structured treatment interruptions, biomedical engineering.

  18. Capabilities of seismic and georadar 2D/3D imaging of shallow subsurface of transport route using the Seismobile system

    Science.gov (United States)

    Pilecki, Zenon; Isakow, Zbigniew; Czarny, Rafał; Pilecka, Elżbieta; Harba, Paulina; Barnaś, Maciej

    2017-08-01

    In this work, the capabilities of the Seismobile system for shallow subsurface imaging of transport routes, such as roads, railways, and airport runways, in different geological conditions were presented. The Seismobile system combines the advantages of seismic profiling using landstreamer and georadar (GPR) profiling. It consists of up to four seismic measuring lines and carriage with a suspended GPR antenna. Shallow subsurface recognition may be achieved to a maximum width of 10.5 m for a distance of 3.5 m between the measurement lines. GPR measurement is performed in the axis of the construction. Seismobile allows the measurement time, labour and costs to be reduced due to easy technique of its installation, remote data transmission from geophones to accompanying measuring modules, automated location of the system based on GPS and a highly automated method of seismic wave excitation. In this paper, the results of field tests carried out in different geological conditions were presented. The methodologies of acquisition, processing and interpretation of seismic and GPR measurements were broadly described. Seismograms and its spectrum registered by Seismobile system were compared to the ones registered by Geode seismograph of Geometrix. Seismic data processing and interpretation software allows for the obtaining of 2D/3D models of P- and S-wave velocities. Combined seismic and GPR results achieved sufficient imaging of shallow subsurface to a depth of over a dozen metres. The obtained geophysical information correlated with geological information from the boreholes with good quality. The results of performed tests proved the efficiency of the Seismobile system in seismic and GPR imaging of a shallow subsurface of transport routes under compound conditions.

  19. A new laser reflectance system capable of measuring changing cross-sectional area of soft tissues during tensile testing.

    Science.gov (United States)

    Pokhai, Gabriel G; Oliver, Michele L; Gordon, Karen D

    2009-09-01

    Determination of the biomechanical properties of soft tissues such as tendons and ligaments is dependent on the accurate measurement of their cross-sectional area (CSA). Measurement methods, which involve contact with the specimen, are problematic because soft tissues are easily deformed. Noncontact measurement methods are preferable in this regard, but may experience difficulty in dealing with the complex cross-sectional shapes and glistening surfaces seen in soft tissues. Additionally, existing CSA measurement systems are separated from the materials testing machine, resulting in the inability to measure CSA during testing. Furthermore, CSA measurements are usually made in a different orientation, and with a different preload, prior to testing. To overcome these problems, a noncontact laser reflectance system (LRS) was developed. Designed to fit in an Instron 8872 servohydraulic test machine, the system measures CSA by orbiting a laser transducer in a circular path around a soft tissue specimen held by tissue clamps. CSA measurements can be conducted before and during tensile testing. The system was validated using machined metallic specimens of various shapes and sizes, as well as different sizes of bovine tendons. The metallic specimens could be measured to within 4% accuracy, and the tendons to within an average error of 4.3%. Statistical analyses showed no significant differences between the measurements of the LRS and those of the casting method, an established measurement technique. The LRS was successfully used to measure the changing CSA of bovine tendons during uniaxial tensile testing. The LRS developed in this work represents a simple, quick, and accurate way of reconstructing complex cross-sectional profiles and calculating cross-sectional areas. In addition, the LRS represents the first system capable of automatically measuring changing CSA of soft tissues during tensile testing, facilitating the calculation of more accurate biomechanical properties.

  20. Understanding recurrent crime as system-immanent collective behavior.

    Directory of Open Access Journals (Sweden)

    Matjaž Perc

    Full Text Available Containing the spreading of crime is a major challenge for society. Yet, since thousands of years, no effective strategy has been found to overcome crime. To the contrary, empirical evidence shows that crime is recurrent, a fact that is not captured well by rational choice theories of crime. According to these, strong enough punishment should prevent crime from happening. To gain a better understanding of the relationship between crime and punishment, we consider that the latter requires prior discovery of illicit behavior and study a spatial version of the inspection game. Simulations reveal the spontaneous emergence of cyclic dominance between "criminals", "inspectors", and "ordinary people" as a consequence of spatial interactions. Such cycles dominate the evolutionary process, in particular when the temptation to commit crime or the cost of inspection are low or moderate. Yet, there are also critical parameter values beyond which cycles cease to exist and the population is dominated either by a stable mixture of criminals and inspectors or one of these two strategies alone. Both continuous and discontinuous phase transitions to different final states are possible, indicating that successful strategies to contain crime can be very much counter-intuitive and complex. Our results demonstrate that spatial interactions are crucial for the evolutionary outcome of the inspection game, and they also reveal why criminal behavior is likely to be recurrent rather than evolving towards an equilibrium with monotonous parameter dependencies.

  1. Systems biology approaches to understand natural products biosynthesis

    Directory of Open Access Journals (Sweden)

    Cuauhtemoc eLicona-Cassani

    2015-12-01

    Full Text Available Actinomycetes populate soils and aquatic sediments which impose biotic and abiotic challenges for their survival. As a result, actinomycetes metabolism and genomes have evolved to produce an overwhelming diversity of specialized molecules. Polyketides, non-ribosomal peptides, post-translationally modified peptides, lactams and terpenes are well known bioactive natural products with enormous industrial potential. Accessing such biological diversity has proven difficult due to the complex regulation of cellular metabolism in actinomycetes and to the sparse knowledge of their physiology. The past decade, however, has seen the development of omics technologies that have significantly contributed to our better understanding of their biology. Key observations have contributed towards a shift in the exploitation of actinomycetes biology, such as using their full genomic potential, activating entire pathways through key metabolic elicitors and pathway engineering to improve biosynthesis. Here, we review recent efforts devoted to achieving enhanced discovery, activation and manipulation of natural product biosynthetic pathways in model actinomycetes using genome-scale biological datasets.

  2. Understanding global health governance as a complex adaptive system.

    Science.gov (United States)

    Hill, Peter S

    2011-01-01

    The transition from international to global health reflects the rapid growth in the numbers and nature of stakeholders in health, as well as the constant change embodied in the process of globalisation itself. This paper argues that global health governance shares the characteristics of complex adaptive systems, with its multiple and diverse players, and their polyvalent and constantly evolving relationships, and rich and dynamic interactions. The sheer quantum of initiatives, the multiple networks through which stakeholders (re)configure their influence, the range of contexts in which development for health is played out - all compound the complexity of this system. This paper maps out the characteristics of complex adaptive systems as they apply to global health governance, linking them to developments in the past two decades, and the multiple responses to these changes. Examining global health governance through the frame of complexity theory offers insight into the current dynamics of governance, and while providing a framework for making meaning of the whole, opens up ways of accessing this complexity through local points of engagement.

  3. Understanding Beam Alignment in a Coherent Lidar System

    Science.gov (United States)

    Prasad, Narasimha S.; Roychoudhari, Chandrasekhar

    2015-01-01

    Optical beam alignment in a coherent lidar (or ladar) receiver system plays a critical role in optimizing its performance. Optical alignment in a coherent lidar system dictates the wavefront curvature (phase front) and Poynting vector) matching of the local oscillator beam with the incoming receiver beam on a detector. However, this alignment is often not easy to achieve and is rarely perfect. Furthermore, optical fibers are being increasingly used in coherent lidar system receivers for transporting radiation to achieve architectural elegance. Single mode fibers also require stringent mode matching for efficient light coupling. The detector response characteristics vary with the misalignment of the two pointing vectors. Misalignment can lead to increase in DC current. Also, a lens in front of the detector may exasperate phase front and Poynting vector mismatch. Non-Interaction of Waves, or the NIW property indicates the light beams do not interfere by themselves in the absence of detecting dipoles. In this paper, we will analyze the extent of misalignment on the detector specifications using pointing vectors of mixing beams in light of the NIW property.

  4. NASA Langley's AirSTAR Testbed: A Subscale Flight Test Capability for Flight Dynamics and Control System Experiments

    Science.gov (United States)

    Jordan, Thomas L.; Bailey, Roger M.

    2008-01-01

    As part of the Airborne Subscale Transport Aircraft Research (AirSTAR) project, NASA Langley Research Center (LaRC) has developed a subscaled flying testbed in order to conduct research experiments in support of the goals of NASA s Aviation Safety Program. This research capability consists of three distinct components. The first of these is the research aircraft, of which there are several in the AirSTAR stable. These aircraft range from a dynamically-scaled, twin turbine vehicle to a propeller driven, off-the-shelf airframe. Each of these airframes carves out its own niche in the research test program. All of the airplanes have sophisticated on-board data acquisition and actuation systems, recording, telemetering, processing, and/or receiving data from research control systems. The second piece of the testbed is the ground facilities, which encompass the hardware and software infrastructure necessary to provide comprehensive support services for conducting flight research using the subscale aircraft, including: subsystem development, integrated testing, remote piloting of the subscale aircraft, telemetry processing, experimental flight control law implementation and evaluation, flight simulation, data recording/archiving, and communications. The ground facilities are comprised of two major components: (1) The Base Research Station (BRS), a LaRC laboratory facility for system development, testing and data analysis, and (2) The Mobile Operations Station (MOS), a self-contained, motorized vehicle serving as a mobile research command/operations center, functionally equivalent to the BRS, capable of deployment to remote sites for supporting flight tests. The third piece of the testbed is the test facility itself. Research flights carried out by the AirSTAR team are conducted at NASA Wallops Flight Facility (WFF) on the Eastern Shore of Virginia. The UAV Island runway is a 50 x 1500 paved runway that lies within restricted airspace at Wallops Flight Facility. The

  5. Power ramp rate capabilities of a 5 kW proton exchange membrane fuel cell system with discrete ejector control

    Science.gov (United States)

    Nikiforow, K.; Pennanen, J.; Ihonen, J.; Uski, S.; Koski, P.

    2018-03-01

    The power ramp rate capabilities of a 5 kW proton exchange membrane fuel cell (PEMFC) system are studied theoretically and experimentally for grid support service applications. The fuel supply is implemented with a fixed-geometry ejector and a discrete control solution without any anode-side pressure fluctuation suppression methods. We show that the stack power can be ramped up from 2.0 kW to 4.0 kW with adequate fuel supply and low anode pressure fluctuations within only 0.1 s. The air supply is implemented with a centrifugal blower. Air supply ramp rates are studied with a power increase executed within 1 and 0.2 s after the request, the time dictated by grid support service requirements in Finland and the UK. We show that a power ramp-up from 2.0 kW to 3.7 kW is achieved within 1 s with an initial air stoichiometry of 2.5 and within 0.2 s with an initial air stoichiometry of 7.0. We also show that the timing of the power ramp-up affects the achieved ancillary power capacity. This work demonstrates that hydrogen fueled and ejector-based PEMFC systems can provide a significant amount of power in less than 1 s and provide valuable ancillary power capacity for grid support services.

  6. Towards an understanding of the origin of the Solar system

    Science.gov (United States)

    Griv, Evgeny

    Kant (1755) and Laplace (1796) built own hypothesis on the idea of Sun and planets forming from a scattering substance in space. It is well-known the main difficult of the Kant-Laplace hypothesis consists in appearance of angular momentum exploring. Attempts to find a plausible naturalistic explanation of the origin of the solar system in the framework of Safronov's (1969) hypothesis of accretion began about 50 years ago but have not yet been quantitatively successful. Accordingly, planets formed by accretion of solid particles, with or without the presence of gas during the later stages of planetary formation. The main problem is the timescale, which is comparable to or longer than estimates of the lifetime of planet-forming disks. In this work the position is adopted that involve a simultaneous formation of the Sun and the rest of the solar system through a gravitational instability in early solar nebula. In our model, planetary formation is thought to start with inelastically colliding gaseous and dust particles settling to the central plane of this rotating nebula to form a thin layer around the plane. On attaining a certain critical thickness small in comparison with the outer radius of the system, as a result of a local gravitational collapse the nebula disintegrated into the central body ("protosun") and a number of separate protoplanets. The massive gas and dust solar nebula of solar composition is considered, and the gasdynamic theory is used to study the gravitational instability in its protoplanetary disk. The implications for the origin of the solar system are discussed. It is suggested that the large part of the initial mass of protoplanets of the Earth's group was blown away due to intensive thermal emission of the early Sun. Such a point of view is not unnatural since the planets of the Earth's type consist mainly of elements with a high melting temperature and are almost lacking light elements. By adding to the present masses of the terrestrial

  7. Modeling and Control System Design for an Integrated Solar Generation and Energy Storage System with a Ride-Through Capability: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wang, X.; Yue, M.; Muljadi, E.

    2012-09-01

    This paper presents a generic approach for PV panel modeling. Data for this modeling can be easily obtained from manufacturer datasheet, which provides a convenient way for the researchers and engineers to investigate the PV integration issues. A two-stage power conversion system (PCS) is adopted in this paper for the PV generation system and a Battery Energy Storage System (BESS) can be connected to the dc-link through a bi-directional dc/dc converter. In this way, the BESS can provide some ancillary services which may be required in the high penetration PV generation scenario. In this paper, the fault ride-through (FRT) capability is specifically focused. The integrated BESS and PV generation system together with the associated control systems is modeled in PSCAD and Matlab platforms and the effectiveness of the controller is validated by the simulation results.

  8. AQUILA Remotely Piloted Vehicle System Technology Demonstrator (RPV-STD) Program. Volume I. System Description and Capabilities

    Science.gov (United States)

    1979-04-01

    Tecnoog LaboratoryU. AmyRserhadTcnlgLaoaois nlsifd Volume 19 ofsarthre-volumnreport I -3 vetia bFrrier RAIIO rAErea ANDADDEmS, a0 atlar suprte pet Te...C-0055; (2) Installation and Checkout of RPV Sensors In the Otter U-1A Aircraft, DAEA18-75-C-0165; (3) ICNS Aquila- Otter Mini-RPV System Feasibility...and (3) training LMSC and Army personnel to operate the Aquila and to perform simulated tactical missions. A suitably modified Otter manned aircraft

  9. Managing Computer Systems Development: Understanding the Human and Technological Imperatives.

    Science.gov (United States)

    1985-06-01

    tjq~ 2hancze, John-Wiley and sons, Inc 9B 12. Beckhard ~ Richard and Harris, Reuben Top 13. DeMarco, T., Sjruj~ed An 1 s is and L.in 150 14. Dickover...information system development. Beckhard and Harris [Ref. 12: pp. 16-19] identify two essential conditions for any change effort to be effectively managed...February 19814. 10. Nolan, Richard Lo, "Controlling the Costs of Data Services," j&KjX Bisinoss Reviews July-August 1977. 11. Tichy, NoelrM : ia~gn

  10. Mediterranean savanna system: understanding and modeling of olive orchard.

    Science.gov (United States)

    Brilli, Lorenzo; Moriondo, Marco; Bindi, Marco

    2013-04-01

    Nowadays most of the studies on C and N exchange were focused on forest ecosystems and crop systems, while only few studies have been focused on so called "savanna systems". They are long-term agro-ecosystems (fruit trees, grapevines and olive trees, etc.) usually characterized by two different layers (ground vegetation and trees). Generally, there is a lack of knowledge about these systems due to their intrinsic structural complexity (different eco-physiological characteristics so as agricultural practices). However, given their long-term carbon storage capacity, these systems can play a fundamental role in terms of global C cycle. Among all of them, the role that olive trees can play in C sequestration should not be neglected, especially in Mediterranean areas where they typify the rural landscape and are widely cultivated (Loumou and Giourga, 2003). It is therefore fundamental modelling the C-fluxes exchanges coming from these systems through a tool able to well reproduce these dynamics in one of the most exposed areas to the risk of climate change (IPCC, 2007). In this work, 2 years of Net CO2 Ecosystem Exchange (NEE) measures from eddy covariance were used to test the biogeochemistry model DayCent. The study was conducted in a rain-fed olive orchard situated in Follonica, South Tuscany, Italy (42 ° 55'N, 10 ° 45'E), in an agricultural area near the coast. The instrumentation for flux measurement was placed 1.9 m above the canopy top (6.5 m from the ground) so that the footprint area, expressed as the area containing 90% of the observed flux, was almost entirely contained within the olive orchard limits (Brilli et al., in press). Ancillary slow sensors have included soil temperature profiles, global radiation, air temperature and humidity, rain gauge. Fluxes of sensible heat, latent heat, momentum and CO2 as well as ancillary data were derived at half-hourly time resolution. Specific soil (texture, current and historical land use and vegetation cover) and

  11. Conceptual Challenges of the Systemic Approach in Understanding Cell Differentiation.

    Science.gov (United States)

    Paldi, Andras

    2018-01-01

    The cells of a multicellular organism are derived from a single zygote and genetically identical. Yet, they are phenotypically very different. This difference is the result of a process commonly called cell differentiation. How the phenotypic diversity emerges during ontogenesis or regeneration is a central and intensely studied but still unresolved issue in biology. Cell biology is facing conceptual challenges that are frequently confused with methodological difficulties. How to define a cell type? What stability or change means in the context of cell differentiation and how to deal with the ubiquitous molecular variations seen in the living cells? What are the driving forces of the change? We propose to reframe the problem of cell differentiation in a systemic way by incorporating different theoretical approaches. The new conceptual framework is able to capture the insights made at different levels of cellular organization and considered previously as contradictory. It also provides a formal strategy for further experimental studies.

  12. Quantifying 'causality' in complex systems: understanding transfer entropy.

    Directory of Open Access Journals (Sweden)

    Fatimah Abdul Razak

    Full Text Available 'Causal' direction is of great importance when dealing with complex systems. Often big volumes of data in the form of time series are available and it is important to develop methods that can inform about possible causal connections between the different observables. Here we investigate the ability of the Transfer Entropy measure to identify causal relations embedded in emergent coherent correlations. We do this by firstly applying Transfer Entropy to an amended Ising model. In addition we use a simple Random Transition model to test the reliability of Transfer Entropy as a measure of 'causal' direction in the presence of stochastic fluctuations. In particular we systematically study the effect of the finite size of data sets.

  13. Quantifying ‘Causality’ in Complex Systems: Understanding Transfer Entropy

    Science.gov (United States)

    Abdul Razak, Fatimah; Jensen, Henrik Jeldtoft

    2014-01-01

    ‘Causal’ direction is of great importance when dealing with complex systems. Often big volumes of data in the form of time series are available and it is important to develop methods that can inform about possible causal connections between the different observables. Here we investigate the ability of the Transfer Entropy measure to identify causal relations embedded in emergent coherent correlations. We do this by firstly applying Transfer Entropy to an amended Ising model. In addition we use a simple Random Transition model to test the reliability of Transfer Entropy as a measure of ‘causal’ direction in the presence of stochastic fluctuations. In particular we systematically study the effect of the finite size of data sets. PMID:24955766

  14. Understanding Magmatic Plumbing System Dynamics at Fernandina Island, Galapagos

    Science.gov (United States)

    Varga, K. C.; McGuire, M.; Geist, D.; Harpp, K. S.

    2015-12-01

    Fernandina is the most active Galápagos volcano, and is located closest to the seismically defined hotspot. Allan and Simkin (2000) observed that the subaerial edifice is constructed of homogeneous basalts (Mg# = 49 ± 2) with highly variable plagioclase phenocryst contents and sparse olivine. Geist et al. (2006) proposed a magmatic plumbing system in which the volcano is supplied by interconnected sills, the shallowest of which is density-stratified: olivine and pyroxene are concentrated at greater depths, whereas less dense plagioclase mush is higher in the sill. Consequently, olivine-rich lava erupts laterally during submarine events, but plagioclase-rich lava supplies subaerial vents. To test this hypothesis, we examine lavas erupted in 1995, 2005, and 2009. These SW flank eruptions emerged alternatively from en echelon radial fissures on the lower flanks and circumferential fissures near the caldera rim. The 1995 radial fissure unzipped downslope and then formed a cone 4 km from the coast, sending flows to the ocean. In 2005, circumferential fissures erupted five flows south of the 1995 fissure. As in 1995, the 2009 fissures opened down the SW flank before focusing to a cone near the 1995 vents, producing 6 km-long flows that also reached the ocean. By correlating plagioclase crystal size distribution and morphologies with single event chronological sequences, we examine Fernandina's magmatic plumbing system. Modal plagioclase in 1995 lava decreases (20% to <5%) throughout the middle eruptive phase. Early 2005 samples are nearly aphyric (Chadwick et al., 2010), with 1-2% plagioclase. The 2009 eruption has reduced plagioclase, similar to mid-1995 samples. Preliminary observations suggest that less plagioclase-rich mush is being flushed out during early-to-medial event sequences, whereas plag phenocrysts are transported more during later phases. Plausible plumbing dynamics suggest a zone of plagioclase-rich mush that is eroded and incorporated into radial

  15. The woodrat gut microbiota as an experimental system for understanding microbial metabolism of dietary toxins

    Directory of Open Access Journals (Sweden)

    Kevin D. Kohl

    2016-07-01

    Full Text Available The microbial communities inhabiting the alimentary tracts of mammals, particularly those of herbivores, are estimated to be one of the densest microbial reservoirs on Earth. The significance of these gut microbes in influencing the physiology, ecology and evolution of their hosts is only beginning to be realized. To understand the microbiome of herbivores with a focus on nutritional ecology, while evaluating the roles of host evolution and environment in sculpting microbial diversity, we have developed an experimental system consisting of the microbial communities of several species of herbivorous woodrats (genus Neotoma that naturally feed on a variety of dietary toxins. We designed this system to investigate the long-standing, but experimentally neglected hypothesis that ingestion of toxic diets by herbivores is facilitated by the gut microbiota. Like several other rodent species, the woodrat stomach has a sacculated, nongastric foregut portion. We have documented a dense and diverse community of microbes in the woodrat foregut, with several genera potentially capable of degrading dietary toxins and/or playing a role in stimulating hepatic detoxification enzymes of the host. The biodiversity of these gut microbes appears to be a function of host evolution, ecological experience and diet, such that dietary toxins increase microbial diversity in hosts with experience with these toxins while novel toxins depress microbial diversity. These microbial communities are critical to the ingestion of a toxic diet as reducing the microbial community with antibiotics impairs the host’s ability to feed on dietary toxins. Furthermore, the detoxification capacity of gut microbes can be transferred from Neotoma both intra and interspecifically to naïve animals that lack ecological and evolutionary history with these toxins. In addition to advancing our knowledge of complex host-microbes interactions, this system holds promise for identifying microbes that

  16. A system dynamics approach to understanding the One Health concept.

    Directory of Open Access Journals (Sweden)

    Tai Xie

    Full Text Available There have been many terms used to describe the One Health concept, including movement, strategy, framework, agenda, approach, among others. However, the inter-relationships of the disciplines engaged in the One Health concept have not been well described. To identify and better elucidate the internal feedback mechanisms of One Health, we employed a system dynamics approach. First, a systematic literature review was conducted via searches in PubMed, Web of Knowledge, and ProQuest with the search terms: 'One Health' and (concept* or approach*. In addition, we used the HistCite® tool to add significant articles on One Health to the library. Then, of the 2368 articles identified, 19 were selected for evaluating the inter-relationships of disciplines engaged in One Health. Herein, we report a visually rich, theoretical model regarding interactions of various disciplines and complex problem descriptors engaged in One Health problem solving. This report provides a conceptual framework for future descriptions of the interdisciplinary engagements involved in One Health.

  17. A dynamical system perspective to understanding badminton singles game play.

    Science.gov (United States)

    Chow, Jia Yi; Seifert, Ludovic; Hérault, Romain; Chia, Shannon Jing Yi; Lee, Miriam Chang Yi

    2014-02-01

    By altering the task constraints of cooperative and competitive game contexts in badminton, insights can be obtained from a dynamical systems perspective to investigate the underlying processes that results in either a gradual shift or transition of playing patterns. Positional data of three pairs of skilled female badminton players (average age 20.5±1.38years) were captured and analyzed. Local correlation coefficient, which provides information on the relationship of players' displacement data, between each pair of players was computed for angle and distance from base position. Speed scalar product was in turn established from speed vectors of the players. The results revealed two patterns of playing behaviors (i.e., in-phase and anti-phase patterns) for movement displacement. Anti-phase relation was the dominant coupling pattern for speed scalar relationships among the pairs of players. Speed scalar product, as a collective variable, was different between cooperative and competitive plays with a greater variability in amplitude seen in competitive plays leading to a winning point. The findings from this study provide evidence for increasing stroke variability to perturb existing stable patterns of play and highlights the potential for speed scalar product to be a collective variable to distinguish different patterns of play (e.g., cooperative and competitive). Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Exploration of a capability-focused aerospace system of systems architecture alternative with bilayer design space, based on RST-SOM algorithmic methods.

    Science.gov (United States)

    Li, Zhifei; Qin, Dongliang; Yang, Feng

    2014-01-01

    In defense related programs, the use of capability-based analysis, design, and acquisition has been significant. In order to confront one of the most challenging features of a huge design space in capability based analysis (CBA), a literature review of design space exploration was first examined. Then, in the process of an aerospace system of systems design space exploration, a bilayer mapping method was put forward, based on the existing experimental and operating data. Finally, the feasibility of the foregoing approach was demonstrated with an illustrative example. With the data mining RST (rough sets theory) and SOM (self-organized mapping) techniques, the alternative to the aerospace system of systems architecture was mapping from P-space (performance space) to C-space (configuration space), and then from C-space to D-space (design space), respectively. Ultimately, the performance space was mapped to the design space, which completed the exploration and preliminary reduction of the entire design space. This method provides a computational analysis and implementation scheme for large-scale simulation.

  19. User Instructions for the Systems Assessment Capability, Rev. 0, Computer Codes Volume 1: Inventory, Release, and Transport Modules

    International Nuclear Information System (INIS)

    Eslinger, Paul W.; Engel, David W.; Gerhardstein, Lawrence H.; Lopresti, Charles A.; Nichols, William E.; Strenge, Dennis L.

    2001-12-01

    One activity of the Department of Energy's Groundwater/Vadose Zone Integration Project is an assessment of cumulative impacts from Hanford Site wastes on the subsurface environment and the Columbia River. Through the application of a system assessment capability (SAC), decisions for each cleanup and disposal action will be able to take into account the composite effect of other cleanup and disposal actions. The SAC has developed a suite of computer programs to simulate the migration of contaminants (analytes) present on the Hanford Site and to assess the potential impacts of the analytes, including dose to humans, socio-cultural impacts, economic impacts, and ecological impacts. The general approach to handling uncertainty in the SAC computer codes is a Monte Carlo approach. Conceptually, one generates a value for every stochastic parameter in the code (the entire sequence of modules from inventory through transport and impacts) and then executes the simulation, obtaining an output value, or result. This document provides user instructions for the SAC codes that handle inventory tracking, release of contaminants to the environment, and transport of contaminants through the unsaturated zone, saturated zone, and the Columbia River

  20. The ALMA Phasing System: A Beamforming Capability for Ultra-high-resolution Science at (Sub)Millimeter Wavelengths

    Science.gov (United States)

    Matthews, L. D.; Crew, G. B.; Doeleman, S. S.; Lacasse, R.; Saez, A. F.; Alef, W.; Akiyama, K.; Amestica, R.; Anderson, J. M.; Barkats, D. A.; Baudry, A.; Broguière, D.; Escoffier, R.; Fish, V. L.; Greenberg, J.; Hecht, M. H.; Hiriart, R.; Hirota, A.; Honma, M.; Ho, P. T. P.; Impellizzeri, C. M. V.; Inoue, M.; Kohno, Y.; Lopez, B.; Martí-Vidal, I.; Messias, H.; Meyer-Zhao, Z.; Mora-Klein, M.; Nagar, N. M.; Nishioka, H.; Oyama, T.; Pankratius, V.; Perez, J.; Phillips, N.; Pradel, N.; Rottmann, H.; Roy, A. L.; Ruszczyk, C. A.; Shillue, B.; Suzuki, S.; Treacy, R.

    2018-01-01

    The Atacama Millimeter/submillimeter Array (ALMA) Phasing Project (APP) has developed and deployed the hardware and software necessary to coherently sum the signals of individual ALMA antennas and record the aggregate sum in Very Long Baseline Interferometry (VLBI) Data Exchange Format. These beamforming capabilities allow the ALMA array to collectively function as the equivalent of a single large aperture and participate in global VLBI arrays. The inclusion of phased ALMA in current VLBI networks operating at (sub)millimeter wavelengths provides an order of magnitude improvement in sensitivity, as well as enhancements in u–v coverage and north–south angular resolution. The availability of a phased ALMA enables a wide range of new ultra-high angular resolution science applications, including the resolution of supermassive black holes on event horizon scales and studies of the launch and collimation of astrophysical jets. It also provides a high-sensitivity aperture that may be used for investigations such as pulsar searches at high frequencies. This paper provides an overview of the ALMA Phasing System design, implementation, and performance characteristics.

  1. Selected Topics on Advances in Capability-Oriented Information Systems Development: Editorial Introduction to Issue 10 of CSIMQ

    Directory of Open Access Journals (Sweden)

    Jelena Zdravkovic

    2017-04-01

    Full Text Available Modern organizations need to be sustainable in the presence of dynamically changing business conditions, which require from Information Systems (IS to address complex challenges for being able to support organizations acting in varying business conditions – changing customer demands, new legislations, new customers, and emerging alliances. From a technical perspective, the gap between business requirements and supporting IS is still present, mostly due to the fact that current IS development approaches operate with artifacts defined on a relatively low abstraction level. To go beyond the state of the art, IS development frameworks used by enterprises need to be structured for solving emerging problems, and enterprises need to have efficient methods for the use of these frameworks to deliver the right IS solutions just-in-time and just-enough. The notion of capability emerged in the beginning of the nineties in the context of competence-based management, military frameworks, and developing organization’s competitive advantage – linguistically, it means the ability or qualities necessary to do something. 

  2. Diagnostic imaging capabilities of the Ocelot -Optical Coherence Tomography System, ex-vivo evaluation and clinical relevance

    International Nuclear Information System (INIS)

    Dohad, Suhail; Shao, John; Cawich, Ian; Kankaria, Manish; Desai, Arjun

    2015-01-01

    consistent physician interpretation of images acquired by the Ocelot and the Dragonfly OCT systems in-spite of distinct image processing algorithms and catheter configurations. This represents a dramatic shift away from both fluoroscopic imaging and diagnostic-only OCT imaging during peripheral arterial intervention towards therapeutic devices that incorporate real time diagnostic OCT imaging. In the clinical practice, these diagnostic capabilities have translated to best-in-class safety and efficacy for CTO crossing using the Ocelot catheter

  3. Development of a system code with CFD capability for analyzing turbulent mixed convection in gas-cooled reactors

    International Nuclear Information System (INIS)

    Kim, Hyeon Il

    2010-02-01

    convection regime, and (4) recently conducted experiments in a deteriorated turbulent heat transfer regime. The validation proved that the Launder-Sharma model can supply improved solutions and much better knowledge about not only the wall temperature but also the heat transfer phenomena in turbulent mixed convection regime, the DTHT, compared to that offered by a single-dimensional empirical correlation. A set of modules to provide Computational Fluid Dynamics (CFD) capability being able to handle multi-dimensional heat transfer is incorporated into a system code for GCRs, GAMMA+, by adopting the Launder-Sharma model of turbulence. We implemented the model into the original system code based on the same schemes, that is, the Implicit Continuous fluid Eulerian (ICE) scheme in a staggered mesh layout, and Newton linearization as constructed in the original code in such a way that the model did not interfere with the numerical stability. The extended code, GAMMA T , was successfully verified and validated in that the model was well formulated with a firmly established numerical foundation through comparisons with an available set of data covering turbulent forced convection regime. The GAMMA T code showed strong potential for future use as a robust integrated system code with the capability of multi-scale analysis in it

  4. A Demonstration of the System Assessment Capability (SAC) Rev. 1 Software for the Hanford Remediation Assessment Project

    Energy Technology Data Exchange (ETDEWEB)

    Eslinger, Paul W.; Kincaid, Charles T.; Nichols, William E.; Wurstner, Signe K.

    2006-11-06

    The System Assessment Capability (SAC) is a suite of interrelated computer codes that provides the capability to conduct large-scale environmental assessments on the Hanford Site. Developed by Pacific Northwest National Laboratory for the Department of Energy, SAC models the fate and transport of radioactive and chemical contaminants, starting with the inventory of those contaminants in waste sites, simulating transport through the environment, and continuing on through impacts to the environment and humans. Separate modules in the SAC address inventory, release from waste forms, water flow and mass transport in the vadose zone, water flow and mass transport in the groundwater, water flow and mass transport in the Columbia River, air transport, and human and ecological impacts. The SAC supports deterministic analyses as well as stochastic analyses using a Monte Carlo approach, enabling SAC users to examine the effect of uncertainties in a number of key parameters. The initial assessment performed with the SAC software identified a number of areas where both the software and the analysis approach could be improved. Since that time the following six major software upgrades have been made: (1) An air pathway model was added to support all-pathway analyses. (2) Models for releases from glass waste forms, buried graphite reactor cores, and buried naval reactor compartments were added. (3) An air-water dual-phase model was added to more accurately track the movement of volatile contaminants in the vadose zone. (4) The ability to run analyses was extended from 1,000 years to 10,000 years or longer after site closure. (5) The vadose zone flow and transport model was upgraded to support two-dimensional or three-dimensional analyses. (6) The ecological model and human risk models were upgraded so the concentrations of contaminants in food products consumed by humans are produced by the ecological model. This report documents the functions in the SAC software and provides a

  5. Phosphors for solid-state lighting: New systems, deeper understanding

    Science.gov (United States)

    Denault, Kristin Ashley

    We explore the structure-composition-property relationships in phosphor materials using a multitude of structural and optical characterization methods including high resolution synchrotron X-ray and neutron powder diffraction and total scattering, low-temperature heat capacity, temperature- and time-resolved photoluminescence, and density functional theory calculations. We describe the development of several new phosphor compositions and provide an in-depth description of the structural and optical properties. We show structural origins of improved thermal performance of photoluminescence and methods for determining structural rigidity in phosphor hosts that may lead to improved luminescent properties. New white light generation strategies are also explored. We begin by presenting the development of a green-yellow emitting oxyfluoride solid-solution phosphor Sr2Ba(AlO4F)1- x(SiO5)x:Ce3+. An examination of the host lattice, and the local structure around the Ce3+ activator ions points to how chemical substitutions play a crucial role in tuning the optical properties of the phosphor. The emission wavelength can be tuned from green to yellow by tuning the composition, x. Photoluminescent quantum yield is determined to be 70+/-5% for some of the examples in the series with excellent thermal properties. Phosphor-converted LED devices are fabricated using an InGaN LED and are shown to exhibit high color rendering white light. Next, we identify two new phosphor solid-solution systems, (Ba1- xSrx)9 Sc2Si6O24:Ce3+,Li+ and Ba9(Y1-ySc y)2Si6O24:Ce3+. The substitution of Sr for Ba in (Ba1-xSrx ) 9Sc2Si6O24:Ce 3+,Li + results in a decrease of the alkaline earth-oxygen bond distances at all three crystallographic sites, leading to changes in optical properties. The room temperature photoluminescent measurements show the structure has three excitation peaks corresponding to Ce3+ occupying the three independent alkaline earth sites. The emission of (Ba 1- xSrx) 9Sc2Si 6O24:Ce3

  6. Using a complex adaptive system lens to understand family caregiving experiences navigating the stroke rehabilitation system.

    Science.gov (United States)

    Ghazzawi, Andrea; Kuziemsky, Craig; O'Sullivan, Tracey

    2016-10-01

    Family caregivers provide the stroke survivor with social support and continuity during the transition home from a rehabilitation facility. In this exploratory study we examined family caregivers' perceptions and experiences navigating the stroke rehabilitation system. The theories of continuity of care and complex adaptive systems were integrated to examine the transition from a stroke rehabilitation facility to the patient's home. This study provides an understanding of the interacting complexities at the macro and micro levels. A convenient sample of family caregivers (n = 14) who provide care for a stroke survivor were recruited 4-12 weeks following the patient's discharge from a stroke rehabilitation facility in Ontario, Canada. Interviews were conducted with family caregivers to examine their perceptions and experiences navigating the stroke rehabilitation system. Directed and inductive content analysis and the theory of Complex Adaptive Systems were used to interpret the perceptions of family caregivers. Health system policies and procedures at the macro-level determined the types and timing of information being provided to caregivers, and impacted continuity of care and access to supports and services at the micro-level. Supports and services in the community, such as outpatient physiotherapy services, were limited or did not meet the specific needs of the stroke survivors or family caregivers. Relationships with health providers, informational support, and continuity in case management all influence the family caregiving experience and ultimately the quality of care for the stroke survivor, during the transition home from a rehabilitation facility.

  7. Space Logistics: Launch Capabilities

    Science.gov (United States)

    Furnas, Randall B.

    1989-01-01

    The current maximum launch capability for the United States are shown. The predicted Earth-to-orbit requirements for the United States are presented. Contrasting the two indicates the strong National need for a major increase in Earth-to-orbit lift capability. Approximate weights for planned payloads are shown. NASA is studying the following options to meet the need for a new heavy-lift capability by mid to late 1990's: (1) Shuttle-C for near term (include growth versions); and (2) the Advanced Lauching System (ALS) for the long term. The current baseline two-engine Shuttle-C has a 15 x 82 ft payload bay and an expected lift capability of 82,000 lb to Low Earth Orbit. Several options are being considered which have expanded diameter payload bays. A three-engine Shuttle-C with an expected lift of 145,000 lb to LEO is being evaluated as well. The Advanced Launch System (ALS) is a potential joint development between the Air Force and NASA. This program is focused toward long-term launch requirements, specifically beyond the year 2000. The basic approach is to develop a family of vehicles with the same high reliability as the Shuttle system, yet offering a much greater lift capability at a greatly reduced cost (per pound of payload). The ALS unmanned family of vehicles will provide a low end lift capability equivalent to Titan IV, and a high end lift capability greater than the Soviet Energia if requirements for such a high-end vehicle are defined.In conclusion, the planning of the next generation space telescope should not be constrained to the current launch vehicles. New vehicle designs will be driven by the needs of anticipated heavy users.

  8. Scale-4 and related modular systems for the evaluation of nuclear facilities and package design featuring criticality, shielding and transfer capabilities

    International Nuclear Information System (INIS)

    1994-01-01

    Nuclear industry, licensing and regulatory authorities need to be able to rely on good performance of computer codes and nuclear data used in calculations for design and operation of nuclear energy facilities. Given the international impact of a major nuclear accident, and the current crisis in public confidence, it is equally important that the methods, programs and data issued should be internationally accepted. The SCALE modular system has been developed and its capabilities extended during the last 15 years. The driving idea behind its development is that it should contain well established computer codes and data libraries, have an user friendly input format, combine and automate analyses requiring multiple computer codes or calculations into standard analytic sequences and to be well documented and publicly available. The fifth version called SCALE-4 has now been released through the Radiation Shielding Information Center (RSIC) to the OECD/NEA Data Bank. SCALE is now used worldwide. The NEA Data Bank alone has distributed more than one hundred copies of the different versions. The OECD/NEA Data Bank has been asked by its international management committee to hold a seminar with the purpose of exchanging information on the latest developments and experiences among code authors and users, to ensure that users have a correct understanding as to how SCALE should be used to model different problems, and to issue recommendations for further development and benchmarking

  9. From Global Sustainability to Inclusive Education: Understanding urban children's ideas about the food system

    Science.gov (United States)

    Calabrese Barton, Angela; Koch, Pamela D.; Contento, Isobel R.; Hagiwara, Sumi

    2005-08-01

    The purpose of this paper is to report our findings from a qualitative study intended to develop our understandings of: what high-poverty urban children understand and believe about food and food systems; and how such children transform and use that knowledge in their everyday lives (i.e. how do they express their scientific literacies including content understandings, process understandings, habits of mind in these content areas). This qualitative study is part of a larger study focused on understanding and developing science and nutritional literacies among high-poverty urban fourth-grade through sixth-grade students and their teachers and caregivers.

  10. Development of a New Analog Test System Capable of Modeling Tectonic Deformation Incorporating the Effects of Pore Fluid Pressure

    Science.gov (United States)

    Zhang, M.; Nakajima, H.; Takeda, M.; Aung, T. T.

    2005-12-01

    Understanding and predicting the tectonic deformation within geologic strata has been a very important research subject in many fields such as structural geology and petroleum geology. In recent years, such research has also become a fundamental necessity for the assessment of active fault migration, site selection for geological disposal of radioactive nuclear waste and exploration for methane hydrate. Although analog modeling techniques have played an important role in the elucidation of the tectonic deformation mechanisms, traditional approaches have typically used dry materials and ignored the effects of pore fluid pressure. In order for analog models to properly depict the tectonic deformation of the targeted, large-prototype system within a small laboratory-scale configuration, physical properties of the models, including geometry, force, and time, must be correctly scaled. Model materials representing brittle rock behavior require an internal friction identical to the prototype rock and virtually zero cohesion. Granular materials such as sand, glass beads, or steel beads of dry condition have been preferably used for this reason in addition to their availability and ease of handling. Modeling protocols for dry granular materials have been well established but such model tests cannot account for the pore fluid effects. Although the concept of effective stress has long been recognized and the role of pore-fluid pressure in tectonic deformation processes is evident, there have been few analog model studies that consider the effects of pore fluid movement. Some new applications require a thorough understanding of the coupled deformation and fluid flow processes within the strata. Taking the field of waste management as an example, deep geological disposal of radioactive waste has been thought to be an appropriate methodology for the safe isolation of the wastes from the human environment until the toxicity of the wastes decays to non-hazardous levels. For the

  11. Entropy: A Unifying Path for Understanding Complexity in Natural, Artificial and Social Systems

    Science.gov (United States)

    2011-07-01

    us now address complex systems which include a substantial social component. We may start with economics and theory of finance. Given the long memory ...Entropy: A Unifying Path for Understanding Complexity in Natural, Artificial and Social Systems * Constantino Tsallis Centro Brasileiro de...Path for Understanding Complexity in Natural, Artificial and Social Systems 5a. CONTRACT NUMBER FA23861114006 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

  12. Infrastructure and the Operational Art: A Handbook for Understanding, Visualizing, and Describing Infrastructure Systems

    Science.gov (United States)

    2014-09-01

    closings were a result of the roadways needing to be cleared, and the lasting power outages in the area. Conclusions: Mapping events from Hurricane ...over and it was safe to do so. In general, the users were also prepared to withstand the power outages expected by the storm. Where the system failed...14 2 networks and systems comprising identifiable industries, institutions (in- cluding people and procedures), and distribution capabilities that

  13. Advancing hydrometeorological prediction capabilities through standards-based cyberinfrastructure development: The community WRF-Hydro modeling system

    Science.gov (United States)

    gochis, David; Parodi, Antonio; Hooper, Rick; Jha, Shantenu; Zaslavsky, Ilya

    2013-04-01

    The need for improved assessments and predictions of many key environmental variables is driving a multitude of model development efforts in the geosciences. The proliferation of weather and climate impacts research is driving a host of new environmental prediction model development efforts as society seeks to understand how climate does and will impact key societal activities and resources and, in turn, how human activities influence climate and the environment. This surge in model development has highlighted the role of model coupling as a fundamental activity itself and, at times, a significant bottleneck in weather and climate impacts research. This talk explores some of the recent activities and progress that has been made in assessing the attributes of various approaches to the coupling of physics-based process models for hydrometeorology. One example modeling system that is emerging from these efforts is the community 'WRF-Hydro' modeling system which is based on the modeling architecture of the Weather Research and Forecasting (WRF). An overview of the structural components of WRF-Hydro will be presented as will results from several recent applications which include the prediction of flash flooding events in the Rocky Mountain Front Range region of the U.S. and along the Ligurian coastline in the northern Mediterranean. Efficient integration of the coupled modeling system with distributed infrastructure for collecting and sharing hydrometeorological observations is one of core themes of the work. Specifically, we aim to demonstrate how data management infrastructures used in the US and Europe, in particular data sharing technologies developed within the CUAHSI Hydrologic Information System and UNIDATA, can interoperate based on international standards for data discovery and exchange, such as standards developed by the Open Geospatial Consortium and adopted by GEOSS. The data system we envision will help manage WRF-Hydro prediction model data flows, enabling

  14. Low Voltage Ride-Through Capability of a Single-Stage Single-Phase Photovoltaic System Connected to the Low-Voltage Grid

    DEFF Research Database (Denmark)

    Yang, Yongheng; Blaabjerg, Frede

    2013-01-01

    The progressively growing of single-phase photovoltaic (PV) systems makes the Distribution System Operators (DSO) to update or revise the existing grid codes in order to guarantee the availability, quality and reliability of the electrical system. It is expected that the future PV systems connected...... to the low-voltage grid will be more active with functionalities of low voltage ride-through (LVRT) and the grid support capability, which is not the case today. In this paper, the operation principle is demonstrated for a single-phase grid-connected PV system in low voltage ride through operation in order...... to map future challenges. The system is verified by simulations and experiments. Test results show that the proposed power control method is effective and the single-phase PV inverters connected to low-voltage networks are ready to provide grid support and ride-through voltage fault capability...

  15. Measurement of the Robot Motor Capability of a Robot Motor System: A Fitts's-Law-Inspired Approach

    OpenAIRE

    Lin, Hsien-I; George Lee, C. S.

    2013-01-01

    Robot motor capability is a crucial factor for a robot, because it affects how accurately and rapidly a robot can perform a motion to accomplish a task constrained by spatial and temporal conditions. In this paper, we propose and derive a pseudo-index of motor performance (pIp ) to characterize robot motor capability with robot kinematics, dynamics and control taken into consideration. The proposed pIp provides a quantitative measure for a robot with revolute joints, which is inspired from an...

  16. Thai student existing understanding about the solar system model and the motion of the stars

    Science.gov (United States)

    Anantasook, Sakanan; Yuenyong, Chokchai

    2018-01-01

    The paper examined Thai student existing understanding about the solar system model and the motion of the stars. The participants included 141 Grade 9 students in four different schools of the Surin province, Thailand. Methodology regarded interpretive paradigm. The tool of interpretation included the Student Celestial Motion Conception Questionnaire (SCMCQ) and informal interview. Given understandings in the SCMCQ were read through and categorized according to students' understandings. Then, students were further probed as informal interview. Students' understandings in each category were counted and percentages computed. Finally, students' understandings across four different schools were compared and contrasted using the percentage of student responses in each category. The findings revealed that most students understand about Sun-Moon-Earth (SME) system and solar system model as well, they can use scientific explanations to explain the celestial objects in solar system and how they orbiting. Unfortunately, most of students (more than 70%) never know about the Polaris, the North Star, and 90.1% of them never know about the ecliptic, and probably also the 12 zodiac constellations. These existing understanding suggested some ideas of teaching and learning about solar system model and the motion of the stars. The paper, then, discussed some learning activities to enhance students to further construct meaning about solar system model and the motion of the stars.

  17. Exploring Students' Understanding of Ordinary Differential Equations Using Computer Algebraic System (CAS)

    Science.gov (United States)

    Maat, Siti Mistima; Zakaria, Effandi

    2011-01-01

    Ordinary differential equations (ODEs) are one of the important topics in engineering mathematics that lead to the understanding of technical concepts among students. This study was conducted to explore the students' understanding of ODEs when they solve ODE questions using a traditional method as well as a computer algebraic system, particularly…

  18. Transforming organizational capabilities in strategizing

    DEFF Research Database (Denmark)

    Jørgensen, Claus; Friis, Ole Uhrskov; Koch, Christian

    2014-01-01

    -term evolvements within the companies. We develop our framework of understanding organizational capabilities drawing on dynamic capability, relational capability and strategy as practice concepts, appreciating the performative aspects of developing new routines. Our two cases are taken from one author’s Ph...... reallocated over time thereby creating a growing need for new capabilities and transformed knowledge handling routines. IT emerged into an important resource to support more complex routines of product development as well as specific management and HRM processes assisting the transformation...

  19. Developing Collaborative Product Development Capabilities

    DEFF Research Database (Denmark)

    Mahnke, Volker; Tran, Yen

    2012-01-01

    Collaborative product development capabilities support a company’s product innovation activities. In the context of the fast fashion sector, this paper examines the development of the product development capabilities (PDC) that align product development capabilities in a dual innovation context......, one, slow paced, where the firm is well established and the other, fast paced, which represents a new competitive arena in which the company competes. To understand the process associated with collaborative capability development, we studied three Scandinavian fashion companies pursuing ‘dual...

  20. Using system dynamics modeling to understand the impact of social change initiatives.

    Science.gov (United States)

    Hirsch, Gary B; Levine, Ralph; Miller, Robin Lin

    2007-06-01

    Community psychologists have a long history of interest in understanding social systems and how to bring about enduring positive change in these systems. However, the methods that community psychologists use to anticipate and evaluate the changes that result from system change efforts are less well developed. In the current paper, we introduce readers to system dynamics modeling, an action research approach to studying complex systems and the consequences of system change. We illustrate this approach by describing a system dynamics model of educational reform. We provide readers with an introduction to system dynamics modeling, as well as describe the strengths and limitations of the approach for application to community psychology.

  1. Measurement of the Robot Motor Capability of a Robot Motor System: A Fitts’s-Law-Inspired Approach

    Directory of Open Access Journals (Sweden)

    C. S. George Lee

    2013-07-01

    Full Text Available Robot motor capability is a crucial factor for a robot, because it affects how accurately and rapidly a robot can perform a motion to accomplish a task constrained by spatial and temporal conditions. In this paper, we propose and derive a pseudo-index of motor performance (pIp to characterize robot motor capability with robot kinematics, dynamics and control taken into consideration. The proposed pIp provides a quantitative measure for a robot with revolute joints, which is inspired from an index of performance in Fitts’s law of human skills. Computer simulations and experiments on a PUMA 560 industrial robot were conducted to validate the proposed pIp for performing a motion accurately and rapidly.

  2. Measurement of the robot motor capability of a robot motor system: a Fitts's-law-inspired approach.

    Science.gov (United States)

    Lin, Hsien-I; Lee, C S George

    2013-07-02

    Robot motor capability is a crucial factor for a robot, because it affects how accurately and rapidly a robot can perform a motion to accomplish a task constrained by spatial and temporal conditions. In this paper, we propose and derive a pseudo-index of motor performance (pIp) to characterize robot motor capability with robot kinematics, dynamics and control taken into consideration. The proposed pIp provides a quantitative measure for a robot with revolute joints, which is inspired from an index of performance in Fitts's law of human skills. Computer simulations and experiments on a PUMA 560 industrial robot were conducted to validate the proposed pIp for performing a motion accurately and rapidly.

  3. Life and understanding:the origins of ‘understanding’ in self-organizing nervous systems.

    Directory of Open Access Journals (Sweden)

    Yan Mark Yufik

    2016-12-01

    Full Text Available This article is motivated by the formulation of biotic self-organisation in (Friston, 2013, where the emergence of ‘life’ in coupled material entities (e.g., macromolecules was predicated on bounded subsets that maintain a degree of statistical independence from the rest of the network. Boundary elements in such systems or units constitute a Markov blanket; separating the internal states of the unit from its surrounding states. In this paper, we ask whether Markov blankets operate in the nervous system and underlie the development of intelligence, enabling a progression from the ability to sense the environment to the ability to understand it. Markov blankets have been previously hypothesized to form in neuronal networks as a result of phase transitions that cause network subsets to fold into bounded assemblies, or packets (Yufik, 1998a. The ensuing neuronal packets hypothesis builds on the notion of neuronal assemblies (Hebb, 1949, 1980, treating such assemblies as flexible but stable biophysical structures capable of withstanding entropic erosion. In other words, structures that maintain their integrity under changing conditions. In this treatment, neuronal packets give rise to perception of ’objects’; i.e., quasi-stable (stimulus bound groupings that are conserved over multiple presentations (e.g., the experience of perceiving ‘apple’ can be interrupted and resumed many times. Monitoring the variations in such groups enables the apprehension of behaviour; i.e., attributing to objects the ability to undergo changes without loss of self-identity. Ultimately, ‘understanding’ involves self-directed composition and manipulation of the ensuing ‘mental models’ that are constituted by neuronal packets, whose dynamics capture relationships among objects: that is, dependencies in the behaviour of objects under varying conditions. For example, movement is known to involve rotation of population vectors in the motor cortex

  4. INL Initial Input to the Mission Need for Advanced Post-Irradiation Examination Capability A Non-Major System Acquisition Project

    International Nuclear Information System (INIS)

    Tonc, Vince

    2010-01-01

    Consolidated and comprehensive post-irradiation examination (PIE) capabilities will enable the science and engineering understanding needed to develop the innovative nuclear fuels and materials that are critical to the success of the U.S. Department of Energy's (DOE) Office of Nuclear Energy (NE) programs. Existing PIE capabilities at DOE Laboratories, universities, and in the private sector are widely distributed, largely antiquated, and insufficient to support the long-range mission needs. In addition, DOE's aging nuclear infrastructure was not designed to accommodate modern, state-of-the-art equipment and instrumentation. Currently, the U.S. does not have the capability to make use of state-of-the-art technology in a remote, hot cell environment to characterize irradiated fuels and materials on the micro, nano, and atomic scale. This 'advanced PIE capability' to make use of state-of-the-art scientific instruments in a consolidated nuclear operating environment will enable comprehensive characterization and investigation that is essential for effectively implementing the nuclear fuels and materials development programs in support of achieving the U.S. DOE-NE Mission.

  5. Development of the coupled 'system thermal-hydraulics, 3D reactor kinetics, and hot channel' analysis capability of the MARS code

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, J. J.; Chung, B. D.; Lee, W.J

    2005-02-01

    The subchannel analysis capability of the MARS 3D module has been improved. Especially, the turbulent mixing and void drift models for flow mixing phenomena in rod bundles have been assessed using some well-known rod bundle test data. Then, the subchannel analysis feature was combined to the existing coupled 'system Thermal-Hydraulics (T/H) and 3D reactor kinetics' calculation capability of MARS. These features allow the coupled 'system T/H, 3D reactor kinetics, and hot channel' analysis capability and, thus, realistic simulations of hot channel behavior as well as global system T/H behavior. In this report, the MARS code features for the coupled analysis capability are described first. The code modifications relevant to the features are also given. Then, a coupled analysis of the Main Steam Line Break (MSLB) is carried out for demonstration. The results of the coupled calculations are very reasonable and realistic, and show these methods can be used to reduce the over-conservatism in the conventional safety analysis.

  6. Review of the Joint Capability Integration and Development System (JCIDS) and the National Security Space Acquisition Process (NSSAP)

    National Research Council Canada - National Science Library

    Gamache, Joyce A

    2006-01-01

    .... Several challenging factors unique to space systems development are their high level of technological complexity, their broad joint user base, and their reliance on seamless interoperable systems...

  7. On the role of patterns in understanding the functioning of soil-vegetation-atmosphere systems

    Science.gov (United States)

    In this paper, we review the role of patterns to improve our understanding of water, mass and energy exchange processes in soil-vegetation-atmosphere systems. We explore the main mechanisms that lead to the formation of patterns in these systems and discuss different approaches to characterizing and...

  8. Children's and Adolescents' Thoughts on Pollution: Cognitive Abilities Required to Understand Environmental Systems

    Science.gov (United States)

    Rodríguez, Manuel; Kohen, Raquel; Delval, Juan

    2015-01-01

    Pollution phenomena are complex systems in which different parts are integrated by means of causal and temporal relationships. To understand pollution, children must develop some cognitive abilities related to system thinking and temporal and causal inferential reasoning. These cognitive abilities constrain and guide how children understand…

  9. Understanding the Space Shuttle Main Engine Hydraulic Actuation System and Reviewing Its Evolution

    Science.gov (United States)

    McWade, Robert J.; Minor, Robert B.; McNutt, Leslie M.

    2010-01-01

    The complex engine start and thrust control requirements of the Space Shuttle Main Engine (SSME) require unique valve, actuator and control system hardware. The Hydraulic Actuation System (HAS) was designed, developed, and now operates to meet tight engine control requirement limits to assure safe, reliable and correct engine thrust at all times. The actuator is designed to be fail safe and fail operate in the areas where redundancy is important. The HAS has an additional pneumatic operating capability that insures a safe sequential closure of all actuators and propellant valves in the event of the loss of hydraulic system pressure or loss of electrical closed loop control of the actuator. The objective of this paper is to provide a complete description of the actuator s internal operating system, along with its interaction with all SSME system interfaces. Additionally the paper addresses the challenges, problems identified, and corrected, and lessons learned, during the course of the almost 35 years of engine operation.

  10. Understanding the Organization of Public Health Delivery Systems: An Empirical Typology

    OpenAIRE

    Mays, Glen P; Scutchfield, F Douglas; Bhandari, Michelyn W; Smith, Sharla A

    2010-01-01

    Context: Policy discussions about improving the U.S. health care system increasingly recognize the need to strengthen its capacities for delivering public health services. A better understanding of how public health delivery systems are organized across the United States is critical to improvement. To facilitate the development of such evidence, this article presents an empirical method of classifying and comparing public health delivery systems based on key elements of their organizational s...

  11. Understanding the functions and relationships of the glymphatic system and meningeal lymphatics

    DEFF Research Database (Denmark)

    Louveau, Antoine; Plog, Benjamin A; Antila, Salli

    2017-01-01

    to the peripheral (CNS-draining) lymph nodes. We speculate on the relationship between the two systems and their malfunction that may underlie some neurological diseases. Although much remains to be investigated, these new discoveries have changed our understanding of mechanisms underlying CNS immune privilege...... and CNS drainage. Future studies should explore the communications between the glymphatic system and meningeal lymphatics in CNS disorders and develop new therapeutic modalities targeting these systems....

  12. Evaluation of the Capability of Ionic Liquid-Amino Acid Aqueous Systems for the Formation of Aqueous Biphasic Systems and Their Applications in Extraction.

    Science.gov (United States)

    Noshadi, Sajjad; Sadeghi, Rahmat

    2017-03-30

    To obtain further experimental evidence for a better understanding of the molecular mechanisms responsible for the soluting-out effect phenomena in ternary systems composed of an ionic liquid (IL), amino acid, and water, systematic studies on the vapor-liquid, liquid-liquid, and solid-liquid equilibrium behavior of aqueous solutions of several ILs were carried out in the presence of a range of amino acids. Water activities for binary and ternary aqueous solutions containing 1-butyl-3-methylimidazolium chloride, [C 4 mim]Cl, 1-hexyl-3-methylimidazolium chloride, [C 6 mim]Cl, 1-butyl-3-methyl-imidazolium trifluoromethanesulfonate, [C 4 mim][CF 3 SO 3 ], l-Ser, Gly, Ala, and l-Pro were measured using both vapor pressure osmometry and isopiestic methods. All of the ternary IL + amino acid + water systems show negative deviations from semi-ideal behavior and therefore soluting-out effects have been observed in these systems. In the case of the [C 4 mim][CF 3 SO 3 ] + amino acids aqueous systems, the IL is soluted-out by the amino acids and the soluting-out effect appears by aqueous biphasic system formation. For these systems, the phase diagram and partition coefficient of caffeine were measured at 298.15 K. However, for the [C 4 mim]Cl and [C 6 mim]Cl containing systems, the amino acids are soluted-out by the ILs and the soluting-out effect appears by precipitation of the amino acids from the solution, and the solubilities of the amino acids in the aqueous solutions decrease in the presence of [C 4 mim]Cl and [C 6 mim]Cl.

  13. Rights, goals, and capabilities

    NARCIS (Netherlands)

    van Hees, M.V.B.P.M

    This article analyses the relationship between rights and capabilities in order to get a better grasp of the kind of consequentialism that the capability theory represents. Capability rights have been defined as rights that have a capability as their object (rights to capabilities). Such a

  14. Review of the Joint Capability Integration and Development System (JCIDS) and the National Security Space Acquisition Process (NSSAP)

    National Research Council Canada - National Science Library

    Gamache, Joyce A

    2006-01-01

    .... Several challenging factors unique to space systems development are the high level of technological complexity, a broad joint user base, and the reliance on seamless interoperable systems to achieve...

  15. LVRT Capability of Single-Phase Grid-Connected HERIC Inverter in PV Systems by a Look-up Table Based Predictive Control

    DEFF Research Database (Denmark)

    Zangeneh Bighash, Esmaeil; Sadeghzadeh, Seyed Mohammad; Ebrahimzadeh, Esmaeil

    2017-01-01

    , nowadays these systems should have Low Voltage Ride-Through (LVRT) capability. The PV system should stay connected to the grid at fault time and help to recover the grid voltage by injecting the reactive power like in a power plant or a custom power device. There are two important factors for single phase...... grid connected PV inverters. The first one is the structure of the inverter and the second one is the control part. In this regard, the HERIC inverter can be a good selection among the transformerless inverters for a PV system due to its high efficiency. For the control part, this paper presents a look...

  16. Building server capabilities in China

    DEFF Research Database (Denmark)

    Adeyemi, Oluseyi; Slepniov, Dmitrij; Wæhrens, Brian Vejrum

    2012-01-01

    The purpose of this paper is to further our understanding of multinational companies building server capabilities in China. The paper is based on the cases of two western companies with operations in China. The findings highlight a number of common patterns in the 1) managerial challenges related...... to the development of server capabilities at offshore sites, and 2) means of how these challenges can be handled....

  17. STEPS IN UNDERSTANDING THE ROLE OF INSTABILITY UPON URBAN TERITORRIAL SYSTEMS

    Directory of Open Access Journals (Sweden)

    Andrei SCHVAB

    2015-12-01

    Full Text Available Instability is an omnipresent process that creates the conditions for adaptation and change. A territorial system cannot develop without instability. A high degree of system instability points out an acute structural and functional disorder. The present study proposes a method to measure system instability through economic structural and functional changes inside urban territorial systems. The analysis is done by quantifying the changes and transfers in internal economic hierarchies. System instability shows the role that the system plays in its environment and consequently the measures that can be taken to amplify or hinder (depending on the desired outcome that role. The conceptual framework captures the adaptive processes associated with system instability and both structural and functional changes are evidenced. The non-linear processes were analysed for the urban territorial system of Baia Mare (Romania underlining their role in the city’s adaptation to the changing of its environment. The proposed method starts from the assumption that internal systemic hierarchy is a very stable parameter of state. If the system is unstable, significant changes of the internal hierarchy will happen, and this will be reflected in a strong structural and functional shift. Measuring system instability helps better understanding the impact that change and adaptation have over the territorial system and its environment. Understanding these processes may offer policy makers the evidence they need to take actions in a conscious manner.

  18. The Foundation Role for Theories of Agency in Understanding Information Systems Design

    Directory of Open Access Journals (Sweden)

    Robert Johnston

    2002-11-01

    Full Text Available In this paper we argue that theories of agency form a foundation upon which we can build a deeper understanding of information systems design. We do so by firstly recognising that information systems are part of purposeful sociotechnical systems and that consequently theories of agency may help in understanding them. We then present two alternative theories of agency (deliberative and situational, mainly drawn from the robotics and artificial intelligence disciplines, and in doing so, we note that existing information system design methods and ontological studies of those methods implicitly adhere to the deliberative theory of agency. We also note that while there are advantages in specific circumstances from utilising the situated theory of agency in designing complex systems, because of their differing ontological commitments, such systems would be difficult to analyse and evaluate using ontologies currently used in information systems. We then provide evidence that such situational information systems can indeed exist, by giving a specific example (the Kanban system, which has emerged from manufacturing practice. We conclude that information systems are likely to benefit from creating design approaches supporting the production of situational systems.

  19. Energy-Focused Fusion Information System Integration, A NISE funded Capability Investment Project. Year 1 FY 2013 Report

    Science.gov (United States)

    2013-09-01

    Acquisition (SCADA) networks are one type of ICS, designed to monitor and control critical infrastructures in electrical, water, oil , gas, and data industries...Christian Szatkowski, Jose Romero -Mariona, and Doug Lang, “Energy Efficiency and Energy Security Optimization Dashboard for Computing Systems...Systems Center Pacific 53560 Hull Street, San Diego CA, 92152-5001 Jose Romero -Mariona Space and Naval Warfare Systems Center Pacific 53560 Hull

  20. Fundamental Evaluation of Adaptation and Human Capabilities in a Condition Using a System to Give a User an Artificial Oculomotor Function to Control Directions of Both Eyes Independently

    Directory of Open Access Journals (Sweden)

    Fumio Mizuno

    2011-10-01

    Full Text Available To investigate flexible adaptation of visual system, we developed a system to provide a user an artificial oculomotor function to control directions of both eyes. The system named “Virtual Chameleon” consists of two CCD cameras independently controlled and a head-mounted display. The user can control each tracking directions of two cameras with sensors set to both hands so that the user can get independent arbitrary view fields for both eyes. We performed fundamental experiments to evaluate capability to evaluate adaptation to use of Virtual Chameleon and effects on the user's capabilities. Eleven healthy volunteers with normal and corrected-to-normal vision participated in the experiments. The experiments were tests to find out each position of targets put in both side of a subject. In the experiments, a condition using Virtual Chameleon and a condition without it was adopted. We obtained accuracy rates and time intervals to find out target positions as experimental results. The experiments showed all of volunteers became able to actively control independent visual axes and correctly understood two different views by using Virtual Chameleon, even though two independent view fields yielded binocular rivalry to volunteers and binocular rivalry reduced human capabilities compared to cases without Virtual Chameleon.

  1. Applied information system-based in enhancing students' understanding towards higher order thinking (HOTS)

    Science.gov (United States)

    Hua, Ang Kean; Ping, Owi Wei

    2017-05-01

    The application of information and communications technology (ICT) had become more important in our daily life, especially in educational field. Teachers are encouraged to use information system-based in teaching Mathematical courses. Higher Order Thinking Skills (HOTS) approach is unable to explain using chalk and talk methods. It needs students to analyze, evaluate, and create by their own natural abilities. The aim of this research study was to evaluate the effectiveness of the application information system-based in enhance the students understanding about HOTS question. Mixed-methods or quantitative and qualitative approach was applied in collecting data, which involve only the standard five students and the teachers in Sabak Bernam, Selangor. Pra-postests was held before and after using information system-based in teaching to evaluate the students' understanding. The result from post-test indicates significant improvement which proves that the use of information system based able to enhance students' understanding about HOTS question and solve it. There were several factor influenced the students such as students' attitude, teachers attraction, school facilities, and computer approach. Teachers play an important role in attracting students to learn. Therefore, the school should provide a conducive learning environment and good facilities for students to learn so that they are able to access more information and always exposed to new knowledge. As conclusion, information system-based are able to enhance students understanding the need of HOTS questions and solve it.

  2. Planning and Implementing a Disaster Recovery Capability for a Mainframe-Based Hospital Information System: Duke University Medical Center's Experience

    Science.gov (United States)

    Kirby, J. David; Walker, L. Phillip; Aaron, Walter H.; Whitesell, Judy J.; Stead, William W.

    1988-01-01

    Since October 1986, the Medical Center Information Systems Department at Duke University Medical Center (DUMC) has been developing and implementing a plan to provide for the continuation of the functions performed by Duke Hospital's central computing system in the event of a disaster that would disable the central hardware configuration for an extended amount of time. The key characteristic of the plan is that it provides for the full function and performance of the system to be returned to the end users within twenty four hours of the primary system's failure.

  3. Mobile Test Capabilities

    Data.gov (United States)

    Federal Laboratory Consortium — The Electrical Power Mobile Test capabilities are utilized to conduct electrical power quality testing on aircraft and helicopters. This capability allows that the...

  4. Connecting Earth Systems: Developing Holistic Understanding through the Earth-System-Science Model

    Science.gov (United States)

    Gagnon, Valoree; Bradway, Heather

    2012-01-01

    For many years, Earth science concepts have been taught as thematic units with lessons in nice, neat chapter packages complete with labs and notes. But compartmentalized Earth science no longer exists, and implementing teaching methods that support student development of holistic understandings can be a time-consuming and difficult task. While…

  5. Water Resources System Archetypes: Towards a Holistic Understanding of Persistent Water Resources Problems

    Science.gov (United States)

    Mirchi, A.; Watkins, D. W.; Madani, K.

    2011-12-01

    Water resources modeling, a well-established tool in water resources planning and management practice, facilitates understanding of the physical and socio-economic processes impacting the wellbeing of humans and ecosystems. While watershed models continue to become more holistic, there is a need for appropriate frameworks and tools for integrated conceptualization of problems to provide reliable qualitative and quantitative bases for policy selection. In recent decades, water resources professionals have become increasingly cognizant of important feedback relationships within water resources systems. We contend that a systems thinking paradigm is required to facilitate characterization of the closed-loop nature of these feedbacks. Furthermore, a close look at different water resources issues reveals that, while many water resources problems are essentially very similar in nature, they continuously appear in different geographical locations. In the systems thinking literature, a number of generic system structures known as system archetypes have been identified to describe common patterns of problematic behavior within systems. In this research, we identify some main system archetypes governing water resources systems, demonstrating their benefits for holistic understanding of various classes of persistent water resources problems. Using the eutrophication problem of Lake Allegan, Michigan, as a case study, we illustrate how the diagnostic tools of system dynamics modeling can facilitate identification of problematic feedbacks within water resources systems and provide insights for sustainable development.

  6. Influence of resin system on the energy absorption capability and morphological properties of plain woven kenaf composites

    Science.gov (United States)

    Salman, S. D.; Leman, Z.; Sultan, M. T. H.; Ishak, M. R.; Cardona, F.

    2015-12-01

    Due to both environmental and technical advantages, natural fibers are being used as reinforcement of polymeric composite in many industries. The flexibility of the most natural fibers is one of the important technical characteristic which allows them to resist impact forces. An investigation was carried out to compare the energy absorption capability of kenaf/PVB film and kenaf/epoxy composites. The hot and cold press techniques were used to fabricate the specimens with 35% kenaf fibre weight fraction. The charpy impact test was performed on forty notched specimens using a pendulum impact tester with different hammer energy. The results showed that the kenaf/PVB film composite has the highest energy absorption, strength and toughness compared with the epoxy composite. At high energy levels, the impact strength and toughness of the kenaf/PVB film was six times of kenaf/epoxy composite. In addition, the scanning electron microscopy was assessed to demonstrate the different failure in fracture surfaces. It was found that the kenaf/PVB film composite failed by fibre fracture while kenaf/epoxy composite failed by a combination of fibre pull-out and fibre fracture as well as crack propagations through the matrix.

  7. Integrated systems understanding using bayesian networks: measuring the effectiveness of a weapon system

    CSIR Research Space (South Africa)

    de Waal, A

    2006-02-27

    Full Text Available Self-Guided weapon system. The results indicate that the method integrates and quantifies links between sub-systems to an extent where questions asked by the end-user can be answered in a quantitative manner...

  8. A business analytics capability framework

    Directory of Open Access Journals (Sweden)

    Ranko Cosic

    2015-09-01

    Full Text Available Business analytics (BA capabilities can potentially provide value and lead to better organisational performance. This paper develops a holistic, theoretically-grounded and practically relevant business analytics capability framework (BACF that specifies, defines and ranks the capabilities that constitute an organisational BA initiative. The BACF was developed in two phases. First, an a priori conceptual framework was developed based on the Resource-Based View theory of the firm and a thematic content analysis of the BA literature. Second, the conceptual framework was further developed and refined using a three round Delphi study involving 16 BA experts. Changes from the Delphi study resulted in a refined and confirmed framework including detailed capability definitions, together with a ranking of the capabilities based on importance. The BACF will help academic researchers and industry practitioners to better understand the capabilities that constitute an organisational BA initiative and their relative importance. In future work, the capabilities in the BACF will be operationalised to measure their as-is status, thus enabling organisations to identify key areas of strength and weakness and prioritise future capability improvement efforts.

  9. AN/FSY-3 Space Fence System – Sensor Site One/Operations Center Integration Status and Sensor Site Two Planned Capability

    Science.gov (United States)

    Fonder, G. P.; Hack, P. J.; Hughes, M. R.

    This paper covers two topics related to Space Fence System development: Sensor Site One / Operations Center construction and integration status including risk reduction integration and test efforts at the Moorestown, NJ Integrated Test Bed (ITB); and the planned capability of Sensor Site Two. The AN/FSY-3 Space Fence System is a ground-based system of S-band radars integrated with an Operations Center designed to greatly enhance the Air Force Space Surveillance network. The radar architecture is based on Digital Beam-forming. This capability permits tremendous user-defined flexibility to customize volume surveillance and track sectors instantaneously without impacting routine surveillance functions. Space Fence provides unprecedented sensitivity, coverage and tracking accuracy, and contributes to key mission threads with the ability to detect, track and catalog small objects in LEO, MEO and GEO. The system is net-centric and will seamlessly integrate into the existing Space Surveillance Network, providing services to external users—such as JSpOC—and coordinating handoffs to other SSN sites. Sensor Site One construction on the Kwajalein Atoll is in progress and nearing completion. The Operations Center in Huntsville, Alabama has been configured and will be integrated with Sensor Site One in the coming months. System hardware, firmware, and software is undergoing integration testing at the Mooretown, NJ ITB and will be deployed at Sensor Site One and the Operations Center. The preliminary design for Sensor Site Two is complete and will provide critical coverage, timeliness, and operational flexibility to the overall system.

  10. Design and construction of a position-sensitive rotating implantation target system with beta-gamma discrimination capabilities

    CERN Document Server

    Famiano, M A; Nishimura, S; Tanihata, I

    2003-01-01

    A rotating implantation target system has been designed for use at the RIKEN projectile fragment separator. While the original design is for the study of short beta-decay lifetimes, the versatility of the device is also noted. The ability of the position-sensitive detector system to distinguish beta and gamma rays is studied, and the correlation of implantation position to beam position for purposes of particle identification is also described. Future improvements and experiments are planned and described briefly. The target detector system represents a simple, inexpensive, yet efficient way of conducting online implantation experiments where particle identification and rapid measurements are desired.

  11. Understanding Suicide among Sexual Minority Youth in America: An Ecological Systems Analysis

    Science.gov (United States)

    Hong, Jun Sung; Espelage, Dorothy L.; Kral, Michael J.

    2011-01-01

    This article examines major risk factors for suicide among sexual minority youth using Bronfenbrenner's ecological systems theory. Although suicidal behavior among sexual minority youth is a major public concern in the United States, understanding of this phenomenon has been limited since the majority of empirical research studies have addressed…

  12. Consensus statement understanding health and malnutrition through a systems approach: the ENOUGH program for early life.

    NARCIS (Netherlands)

    Kaput, J.; Ommen, van B.; Kremer, B.; Priami, C.; Pontes Monteiro, J.; Morine, M.; Pepping, F.; Diaz, Z.; Fenech, M.; He, Y.; Albers, R.; Drevon, C.A.; Evelo, C.T.; Hancock, R.E.W.; Ijsselmuiden, C.; Lumey, L.H.; Minihane, A.M.; Muller, M.R.; Murgia, C.; Radonjic, M.; Sobral, B.W.S.; West Jr., K.P.

    2014-01-01

    Nutrition research, like most biomedical disciplines, adopted and often uses experimental approaches based on Beadle and Tatum’s one gene—one polypeptide hypothesis, thereby reducing biological processes to single reactions or pathways. Systems thinking is needed to understand the complexity of

  13. The Effects of Swedish Knife Model on Students' Understanding of the Digestive System

    Science.gov (United States)

    Cerrah Ozsevgec, Lale; Artun, Huseyin; Unal, Melike

    2012-01-01

    This study was designed to examine the effect of Swedish Knife Model on students' understanding of digestive system. A simple experimental design (pretest-treatment-posttest) was used in the study and internal comparison of the results of the one group was made. The sample consisted of 40 7th grade Turkish students whose ages range from 13 to 15.…

  14. Student Teachers' Ways of Thinking and Ways of Understanding Digestion and the Digestive System in Biology

    Science.gov (United States)

    Çimer, Sabiha Odabasi; Ursavas, Nazihan

    2012-01-01

    The purpose of this study was to identify the ways in which student teachers understand digestion and the digestive system and, subsequently, their ways of thinking, as reflected in their problem solving approaches and the justification schemes that they used to validate their claims. For this purpose, clinical interviews were conducted with 10…

  15. Natural Language Understanding Systems Within the A. I. Paradigm: A Survey and Some Comparisons.

    Science.gov (United States)

    Wilks, Yorick

    The paper surveys the major projects on the understanding of natural language that fall within what may now be called the artificial intelligence paradigm of natural language systems. Some space is devoted to arguing that the paradigm is now a reality and different in significant respects from the generative paradigm of present-day linguistics.…

  16. Students' Understanding of Equilibrium and Stability: The Case of Dynamic Systems

    Science.gov (United States)

    Canu, Michaël; de Hosson, Cécile; Duque, Mauricio

    2016-01-01

    Engineering students in control courses have been observed to lack an understanding of equilibrium and stability, both of which are crucial concepts in this discipline. The introduction of these concepts is generally based on the study of classical examples from Newtonian mechanics supplemented with a control system. Equilibrium and stability are…

  17. Understanding the organization of sharing economy in agri-food systems

    NARCIS (Netherlands)

    Miralles, Isabel; Dentoni, Domenico; Pascucci, Stefano

    2017-01-01

    Despite the proliferation of sharing economy initiatives in agri-food systems, the recent literature has still not unravelled what sharing exactly entails from an organizational standpoint. In light of this knowledge gap, this study aims to understand which resources are shared, and how, in a

  18. Research and Development of a portable microfocus x-ray system capable of providing ultra-high resolutions images of improvised explosive devices

    International Nuclear Information System (INIS)

    Korkala, G.

    1989-01-01

    The utilization of x-ray screening has long been a recognized valuable tool as a means to evaluate and identify suspect articles for possible improvised explosive devices. Recent bombings indicate an increase in technical sophistication by the terrorist which demand additional means to further the possibility of detecting these devices before they reach their target or detonate. This paper discusses history of the use of x-ray and the design parameters of a portable micro-focus x-ray system capable of providing ultra high resolution radiographs as well as being able to be used with additional state-of-the-art imaging systems

  19. Improving transportation systems management and operations (TSM&O), capability maturity model workshop white paper : business processes.

    Science.gov (United States)

    2015-04-01

    Research done through the Second Strategic Highway Research Program (SHRP 2) determined : that agencies with the most effective transportation systems management and operations : (TSM&O) activities were differentiated not by budgets or technical skil...

  20. Improving transportation systems management and operations (TSM&O), capability maturity model workshop white paper : performance measurement.

    Science.gov (United States)

    2015-04-01

    Research done through the Second Strategic Highway Research Program (SHRP 2) determined : that agencies with the most effective transportation systems management and operations : (TSM&O) activities were differentiated not by budgets or technical skil...

  1. Improving transportation systems management and operations (TSM&O), capability maturity model workshop white paper : organization and staffing.

    Science.gov (United States)

    2015-04-01

    Research done through the Second Strategic Highway Research Program (SHRP 2) determined : that agencies with the most effective transportation systems management and operations : (TSM&O) activities were differentiated not by budgets or technical skil...

  2. Intrusion Detection System Requirements. A Capabilities Description in Terms of the Network Monitoring and Assessment Module of CSAP21

    National Research Council Canada - National Science Library

    Metcalf, Therese R; LaPadula, Leonard J

    2000-01-01

    ...) module of the Computer Security Assistance Program for the Twenty-First Century (CSAP21) architecture. The advantage of this approach is that it provides a global and comprehensive context in which to describe intrusion detection system...

  3. Understanding multinational companies in public health systems, using a competitive advantage framework

    Science.gov (United States)

    2011-01-01

    Background This paper discusses the findings of a study which developed five case studies of five multinational health care companies involved in public health care systems. Strategies were analysed in terms of attitude to marketing, pricing and regulation. The company strategies have been subjected to an analysis using Porter's Five Forces, a business strategy framework, which is unusual in health policy studies. Methods This paper shows how analysing company strategy using a business tool can contribute to understanding the strategies of global capital in national health systems. It shows how social science methodologies can draw from business methods to explain company strategies. Results The five companies considered in this paper demonstrate that their strategies have many dimensions, which fit into Porter's Five Forces of comparative advantage. More importantly the Five Forces can be used to identify factors that influence company entry into public health care systems. Conclusions The process of examining the strategic objectives of five health care companies shows that a business tool can help to explain the actions and motives of health care companies towards public health care systems, and so contribute to a better understanding of the strategies of global capital in national health systems. Health service commissioners need to understand this dynamic process, which will evolve as the nature of public health care systems change. PMID:21722372

  4. Understanding multinational companies in public health systems, using a competitive advantage framework

    Directory of Open Access Journals (Sweden)

    Lethbridge Jane

    2011-07-01

    Full Text Available Abstract Background This paper discusses the findings of a study which developed five case studies of five multinational health care companies involved in public health care systems. Strategies were analysed in terms of attitude to marketing, pricing and regulation. The company strategies have been subjected to an analysis using Porter's Five Forces, a business strategy framework, which is unusual in health policy studies. Methods This paper shows how analysing company strategy using a business tool can contribute to understanding the strategies of global capital in national health systems. It shows how social science methodologies can draw from business methods to explain company strategies. Results The five companies considered in this paper demonstrate that their strategies have many dimensions, which fit into Porter's Five Forces of comparative advantage. More importantly the Five Forces can be used to identify factors that influence company entry into public health care systems. Conclusions The process of examining the strategic objectives of five health care companies shows that a business tool can help to explain the actions and motives of health care companies towards public health care systems, and so contribute to a better understanding of the strategies of global capital in national health systems. Health service commissioners need to understand this dynamic process, which will evolve as the nature of public health care systems change.

  5. Understanding multinational companies in public health systems, using a competitive advantage framework.

    Science.gov (United States)

    Lethbridge, Jane

    2011-07-01

    This paper discusses the findings of a study which developed five case studies of five multinational health care companies involved in public health care systems. Strategies were analysed in terms of attitude to marketing, pricing and regulation. The company strategies have been subjected to an analysis using Porter's Five Forces, a business strategy framework, which is unusual in health policy studies. This paper shows how analysing company strategy using a business tool can contribute to understanding the strategies of global capital in national health systems. It shows how social science methodologies can draw from business methods to explain company strategies. The five companies considered in this paper demonstrate that their strategies have many dimensions, which fit into Porter's Five Forces of comparative advantage. More importantly the Five Forces can be used to identify factors that influence company entry into public health care systems. The process of examining the strategic objectives of five health care companies shows that a business tool can help to explain the actions and motives of health care companies towards public health care systems, and so contribute to a better understanding of the strategies of global capital in national health systems. Health service commissioners need to understand this dynamic process, which will evolve as the nature of public health care systems change.

  6. NATO Network Enabled Capability (NNEC) challenges: Why NATO Air Command and Control System (ACCS) might be a good case?

    Science.gov (United States)

    2011-06-01

    Picture ( RAP ), Air Tasking Order (ATO), Air Coordination order (ACO), etc. 2. Non Functional: providing all other functionalities, e.g. IA/security...IBM, BEA, Raytheon, etc.), fielded national systems, NATO systems and prototypes (Euro Fighter, ICC, JADOCS, JCOP, JTS, MUSIC , NE-3A, Nor BFTS...instance, the RAP and FFT dissemination to internal as well as to external entities. The approach will be of benefit to ACCS and NATO C3 in the future

  7. Capability verification of the beam delivery system in the superficially-placed tumor therapy terminal at HIRFL

    International Nuclear Information System (INIS)

    Dai Zhongying; Li Qiang; Xiao Guoqing; Jin Xiaodong; Yan Zheng; Chinese Academy of Sciences, Beijing

    2007-01-01

    The passive beam delivery system in the superficially-placed tumor therapy terminal at Heavy Ion Research Facility in Lanzhou (HIRFL), which includes two orthogonal dipole magnets as scanning system, a motor-driven energy degrader as range-shifter, series of ridge filters as range modulator and a multileaf collimator, is introduced in detail. The capacities of its important components and the whole system have been verified experimentally. The tests of the ridge filter for extending Bragg peak and the range shifter for energy adjustment show both work well. To examine the passive beam delivery system, a beam shaping experiment were carried out, simulating a three-dimensional (3D) conformal irradiation to a tumor. The encouraging experimental result confirms that 3D layer-stacking conformal irradiation can be performed by means of the passive system. The validation of the beam delivery system establishes a substantial basis for upcoming clinical trial for superficially-placed tumors with heavy ions in the therapy terminal at HIRFL. (authors)

  8. Effect of external disturbances and data rate on the response of an automatic landing system capable of curved trajectories

    Science.gov (United States)

    Sherman, W. L.

    1975-01-01

    The effects of steady wind, turbulence, data sample rate, and control-actuator natural frequency on the response of a possible automatic landing system were investigated in a nonstatistical study. The results indicate that the system, which interfaces with the microwave landing system, functions well in winds and turbulence as long as the guidance law contains proper compensation for wind. The system response was satisfactory down to five data samples per second, which makes the system compatible with the microwave landing system. No adverse effects were observed when actuator natural frequency was lowered. For limiting cases, those cases where the roll angle goes to zero just as the airplane touches down, the basic method for computing the turn-algorithm gains proved unsatisfactory and unacceptable landings resulted. Revised computation methods gave turn-algorithm gains that resulted in acceptable landings. The gains provided by the new method also improved the touchdown conditions for acceptable landings over those obtained when the gains were determined by the old method.

  9. A Concept for the Inclusion of Analytical and Computational Capability in Existing Systems for Measurement of Neutron Flux

    Science.gov (United States)

    Patrick, Clinton; Cooper, Anita E.; Powers, W. T.

    2005-01-01

    For approximately two decades, efforts have been sponsored by NASA's Marshall Space Flight Center to make possible high-speed, automated classification and quantification of constituent materials in various harsh environments. MSFC, along with the Air Force/Arnold Engineering Development Center, has led the work, developing and implementing systems that employ principles of emission and absorption spectroscopy to monitor molecular and atomic particulates in gas plasma of rocket engine flow fields. One such system identifies species and quantifies mass loss rates in H2/O2 rocket plumes. Other gases have been examined and the physics of their detection under numerous conditions were made a part of the knowledge base for the MSFC/USAF team. Additionally, efforts are being advanced to hardware encode components of the data analysis tools in order to address real-time operational requirements for health monitoring and management. NASA has a significant investment in these systems, warranting a spiral approach that meshes current tools and experience with technological advancements. This paper addresses current systems - the Optical Plume Anomaly Detector (OPAD) and the Engine Diagnostic Filtering System (EDIFIS) - and discusses what is considered a natural progression: a concept for migrating them towards detection of high energy particles, including neutrons and gamma rays. The proposal outlines system development to date, basic concepts for future advancements, and recommendations for accomplishing them.

  10. Design study of nuclear power systems for deep space explorers. (2) Electricity supply capabilities of solid cores

    International Nuclear Information System (INIS)

    Yamaji, Akifumi; Takizuka, Takakazu; Nabeshima, Kunihiko; Iwamura, Takamichi; Akimoto, Hajime

    2009-01-01

    This study has been carried out in series with the other study, 'Criticality of Low Enriched Uranium Fueled Core' to explore the possibilities of a solid reactor electricity generation system for supplying propulsion power of a deep space explorer. The design ranges of two different systems are determined with respect to the electric power, the radiator mass, and the operating temperatures of the heat-pipes and thermoelectric converters. The two systems are the core surface cooling with heat-pipe system (CSHP), and the core direct cooling with heat-pipe system (CDHP). The evaluated electric powers widely cover the 1 to 100 kW range, which had long been claimed to be the range that lacked the power sources in space. Therefore, the concepts shown by this study may lead to a breakthrough of the human activities in space. The working temperature ranges of the main components, namely the heat-pipes and thermoelectric converters, are wide and covers down to relatively low temperatures. This is desirable from the viewpoints of broadening the choices, reducing the development needs, and improving the reliabilities of the devices. Hence, it is advantageous for an early establishment of the concept. (author)

  11. The trouble with chemical energy: why understanding bond energies requires an interdisciplinary systems approach.

    Science.gov (United States)

    Cooper, Melanie M; Klymkowsky, Michael W

    2013-06-01

    Helping students understand "chemical energy" is notoriously difficult. Many hold inconsistent ideas about what energy is, how and why it changes during the course of a chemical reaction, and how these changes are related to bond energies and reaction dynamics. There are (at least) three major sources for this problem: 1) the way biologists talk about chemical energy (which is also the way we talk about energy in everyday life); 2) the macroscopic approach to energy concepts that is common in physics and physical sciences; and 3) the failure of chemistry courses to explicitly link molecular with macroscopic energy ideas. From a constructivist perspective, it is unlikely that students can, without a coherent understanding of such a central concept, attain a robust and accurate understanding of new concepts. However, changes are on the horizon, guided by the increasing understanding that difficult concepts require coherent, well-designed learning progressions and the new National Research Council Framework for K-12 Science Education. We provide supporting evidence for our assertions and suggestions for an interdisciplinary learning progression designed to better approach the concept of bond energies, a first step in an understanding chemical energy and behavior of reaction systems that is central to biological systems.

  12. Analysis Of The Heat Exchanger Capability At One Line Cooling System Operation Mode Of The RSG-GAS

    International Nuclear Information System (INIS)

    Dibyo, Sukmanto; Kuntoro, Iman

    2000-01-01

    In the frame of minimizing the operation lost of the RSG-GAS reactor, operation using one line cooling system at certain power range is being evaluated. Analysis the performance of cooling system for determining maximum power should be carried out. Analysis was carried out based on heat exchanger calculation using actual operation data. Constraints imposed to the analysis are that inlet cooling system to the reactor core shall be less than 42 o C. The result shows that by using one line of primary and secondary coolant flow of 1780 m exp. 3/hr and 2000 m 3 /hr and secondary coolant temperature from the cooling tower of 38 o C, the primary coolant to the core will be reach 42 o C if reactor operated at power of 16 MW

  13. Prototype readout system for a multi Mpixels UV single-photon imaging detector capable of space flight operation

    Science.gov (United States)

    Seljak, A.; Cumming, H. S.; Varner, G.; Vallerga, J.; Raffanti, R.; Virta, V.

    2018-02-01

    Our collaboration works on the development of a large aperture, high resolution, UV single-photon imaging detector, funded through NASA's Strategic Astrophysics Technology (SAT) program. The detector uses a microchannel plate for charge multiplication, and orthogonal cross strip (XS) anodes for charge readout. Our target is to make an advancement in the technology readiness level (TRL), which enables real scale prototypes to be tested for future NASA missions. The baseline detector has an aperture of 50×50 mm and requires 160 low-noise charge-sensitive channels, in order to extrapolate the incoming photon position with a spatial resolution of about 20 μm FWHM. Technologies involving space flight require highly integrated electronic systems operating at very low power. We have designed two ASICs which enable the construction of such readout system. First, a charge sensitive amplifier (CSAv3) ASIC provides an equivalent noise charge (ENC) of around 600 e-, and a baseline gain of 10 mV/fC. The second, a Giga Sample per Second (GSPS) ASIC, called HalfGRAPH, is a 12-bit analog to digital converter. Its architecture is based on waveform sampling capacitor arrays and has about 8 μs of analog storage memory per channel. Both chips encapsulate 16 measurement channels. Using these chips, a small scale prototype readout system has been constructed on a FPGA Mezzanine Board (FMC), equipped with 32 measurement channels for system evaluation. We describe the construction of HalfGRAPH ASIC, detector's readout system concept and obtained results from the prototype system. As part of the space flight qualification, these chips were irradiated with a Cobalt gamma-ray source, to verify functional operation under ionizing radiation exposure.

  14. Cryo-braking using penetrators for enhanced capabilities for the potential landing of payloads on icy solar system objects

    Science.gov (United States)

    Winglee, R. M.; Robinson, T.; Danner, M.; Koch, J.

    2018-03-01

    The icy moons of Jupiter and Saturn are important astrobiology targets. Access to the surface of these worlds is made difficult by the high ΔV requirements which is typically in the hypervelocity range. Passive braking systems cannot be used due to the lack of an atmosphere, and active braking by rockets significantly adds to the missions costs. This paper demonstrates that a two-stage landing system can overcome these problems and provide significant improvements in the payload fraction that can be landed The first stage involves a hypervelocity impactor which is designed to penetrate to a depth of a few tens of meters. This interaction is the cryo-breaking component and is examined through laboratory experiments, empirical relations and modeling. The resultant ice-particle cloud creates a transient artificial atmosphere that can be used to enable passive braking of the second stage payload dd, with a substantially higher mass payload fraction than possible with a rocket landing system. It is shown that a hollow cylinder design for the impactor can more efficiently eject the material upwards in a solid cone of ice particles relative to solid impactors such as spheres or spikes. The ejected mass is shown to be of the order of 103 to 104 times the mass of the impactor. The modeling indicates that a 10 kg payload with a braking system of 3 m2 (i.e. an areal density of 0.3 kg/m2) is sufficient to allow the landing of the payload with the deceleration limited to less than 2000 g's. Modern electronics can withstand this deceleration and as such the system provides an important alternative to landing payloads on icy solar system objects.

  15. Organisational Capability--What Does It Mean?

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2006

    2006-01-01

    Organisational capability is rapidly becoming recognized as the key to organizational success. However, the lack of research on it has been well documented in the literature, and organizational capability remains an elusive concept. Yet an understanding of organizational capability can offer insights into how RTOs might work most effectively,…

  16. Proceedings of the international workshop on mechanistic understanding of radionuclide migration in compacted/intact systems

    International Nuclear Information System (INIS)

    Tachi, Yukio; Yui, Mikazu

    2010-03-01

    The international workshop on mechanistic understanding of radionuclide migration in compacted / intact systems was held at ENTRY, JAEA, Tokai on 21st - 23rd January, 2009. This workshop was hosted by Japan Atomic Energy Agency (JAEA) as part of the project on the mechanistic model/database development for radionuclide sorption and diffusion behavior in compacted / intact systems. The overall goal of the project is to develop the mechanistic model / database for a consistent understanding and prediction of migration parameters and its uncertainties for performance assessment of geological disposal of radioactive waste. The objective of the workshop is to integrate the state-of-the-art of mechanistic sorption and diffusion model in compacted / intact systems, especially in bentonite / clay systems, and discuss the JAEA's mechanistic approaches and future challenges, especially the following discussions points; 1) What's the status and difficulties for mechanistic model/database development? 2) What's the status and difficulties for applicability of mechanistic model to the compacted/intact system? 3) What's the status and difficulties for obtaining evidences for mechanistic model? 4) What's the status and difficulties for standardization of experimental methodology for batch sorption and diffusion? 5) What's the uncertainties of transport parameters in radionuclides migration analysis due to a lack of understanding/experimental methodologies, and how do we derive them? This report includes workshop program, overview and materials of each presentation, summary of discussions. (author)

  17. Design and development of a MLS based compact active suspension system, featuring air spring and energy harvesting capabilities

    DEFF Research Database (Denmark)

    Berg, Nick Ilsø; Holm, Rasmus Koldborg; Rasmussen, Peter Omand

    2016-01-01

    This paper describes the design and development of an novel Magnetic Lead Screw based active suspension system for passenger vehicles, using a new MLS topology. The design is based on performance specifications found from ISO road profiles, with a maximum harvested energy approach. By integrating...

  18. Assessment of the Temperament, Motivation, and Capability of a School System District for Emergency Management/Crisis Performance

    Science.gov (United States)

    Hoff, Larry A.

    2009-01-01

    This study was a cross-sectional study of leadership and staff of a public school system in Georgia concerning their temperament type, emergency management motivation and emergency management knowledge in relation to Emergency Management/Crisis performance (ERCM). The study consisted of an inclusive questionnaire that contains questions on four…

  19. A Causal and Real-Time Capable Power Management Algorithm for Off-Highway Hybrid Propulsion Systems

    Directory of Open Access Journals (Sweden)

    Johannes Schalk

    2016-12-01

    Full Text Available Hybrid propulsion systems allow for a reduction of fuel consumption and pollutant emissions of future off-highway applications. A challenging aspect of a hybridization is the larger number of system components that further increases both the complexity and the diversification of such systems. Hence, beside a standardization on the hardware side for off-highway systems, a high flexibility and modularity of the control schemes is required to employ them in as many different applications as possible. In this paper, a causal optimization-based power management algorithm is introduced to control the power split between engine and electric machine in a hybrid powertrain. The algorithm optimizes the power split to achieve the maximum power supply efficiency and, thereby, considers the energy cost for maintaining the battery charge. Furthermore, the power management provides an optional function to control the battery state of charge in such a way that a target value is attained. In a simulation case study, the potential and the benefits of the proposed power management for the hybrid powertrain—aiming at a reduction of the fuel consumption of a DMU (diesel multiple unit train operated on a representative track—will be shown.

  20. Validation of a simple aerodynamic model capable to predict the interaction effects occuring between two generic wind propulsion systems

    NARCIS (Netherlands)

    Bordogna, G.; Keuning, J.A.; Huijsmans, R.H.M.; Fossati, Fabio Vittorio; Belloli, Marco; Huijsmans, R.H.M.

    2016-01-01

    In recent years wind-assisted propulsion for commercial ships has gained an increasing interest as valuable alternative to reduce fuel pollutant emissions. However, the development of feasible and commercially viable wind propulsion systems to partially (or fully) propel a ship is nowadays hindered