WorldWideScience

Sample records for underlying enabling technology

  1. Enabling cleanup technology transfer

    International Nuclear Information System (INIS)

    Ditmars, J. D.

    2002-01-01

    Technology transfer in the environmental restoration, or cleanup, area has been challenging. While there is little doubt that innovative technologies are needed to reduce the times, risks, and costs associated with the cleanup of federal sites, particularly those of the Departments of Energy (DOE) and Defense, the use of such technologies in actual cleanups has been relatively limited. There are, of course, many reasons why technologies do not reach the implementation phase or do not get transferred from developing entities to the user community. For example, many past cleanup contracts provided few incentives for performance that would compel a contractor to seek improvement via technology applications. While performance-based contracts are becoming more common, they alone will not drive increased technology applications. This paper focuses on some applications of cleanup methodologies and technologies that have been successful and are illustrative of a more general principle. The principle is at once obvious and not widely practiced. It is that, with few exceptions, innovative cleanup technologies are rarely implemented successfully alone but rather are implemented in the context of enabling processes and methodologies. And, since cleanup is conducted in a regulatory environment, the stage is better set for technology transfer when the context includes substantive interactions with the relevant stakeholders. Examples of this principle are drawn from Argonne National Laboratory's experiences in Adaptive Sampling and Analysis Programs (ASAPs), Precise Excavation, and the DOE Technology Connection (TechCon) Program. The lessons learned may be applicable to the continuing challenges posed by the cleanup and long-term stewardship of radioactive contaminants and unexploded ordnance (UXO) at federal sites

  2. A Technology Enabled Journey

    Science.gov (United States)

    Devine, Pamela Albert

    2012-01-01

    This article features Point Road School, a pre-K-4 school in New Jersey that enhances student learning by integrating new and emerging technologies into the curriculum. Point Road School's technology story began in 1996 with a grant for a classroom modem so students could email their university literacy buddies. The New Jersey school has moved…

  3. Enabling MEMS technologies for communications systems

    Science.gov (United States)

    Lubecke, Victor M.; Barber, Bradley P.; Arney, Susanne

    2001-11-01

    Modern communications demands have been steadily growing not only in size, but sophistication. Phone calls over copper wires have evolved into high definition video conferencing over optical fibers, and wireless internet browsing. The technology used to meet these demands is under constant pressure to provide increased capacity, speed, and efficiency, all with reduced size and cost. Various MEMS technologies have shown great promise for meeting these challenges by extending the performance of conventional circuitry and introducing radical new systems approaches. A variety of strategic MEMS structures including various cost-effective free-space optics and high-Q RF components are described, along with related practical implementation issues. These components are rapidly becoming essential for enabling the development of progressive new communications systems technologies including all-optical networks, and low cost multi-system wireless terminals and basestations.

  4. Web-enabling technologies for the factory floor: a web-enabling strategy for emanufacturing

    Science.gov (United States)

    Velez, Ricardo; Lastra, Jose L. M.; Tuokko, Reijo O.

    2001-10-01

    This paper is intended to address the different technologies available for Web-enabling of the factory floor. It will give an overview of the importance of Web-enabling of the factory floor, in the application of the concepts of flexible and intelligent manufacturing, in conjunction with e-commerce. As a last section, it will try to define a Web-enabling strategy for the application in eManufacturing. This is made under the scope of the electronics manufacturing industry, so every application, technology or related matter is presented under such scope.

  5. Naval Science & Technology: Enabling the Future Force

    Science.gov (United States)

    2013-04-01

    corn for disruptive technologies Laser Cooling Spintronics Bz 1st U.S. Intel satellite GRAB Semiconductors GaAs, GaN, SiC GPS...Payoff • Innovative and game-changing • Approved by Corporate Board • Delivers prototype Innovative Naval Prototypes (5-10 Year) Disruptive ... Technologies Free Electron Laser Integrated Topside EM Railgun Sea Base Enablers Tactical Satellite Large Displacement UUV AACUS Directed

  6. The ENABLER - Based on proven NERVA technology

    International Nuclear Information System (INIS)

    Livingston, J.M.; Pierce, B.L.

    1991-01-01

    The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial mass in low Earth orbit and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tommorrow's space propulsion needs

  7. The ENABLER - Based on proven NERVA technology

    Science.gov (United States)

    Livingston, Julie M.; Pierce, Bill L.

    The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial mass in low Earth orbit and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tommorrow's space propulsion needs.

  8. Survey of Enabling Technologies for CAPS

    Science.gov (United States)

    Antol, Jeffrey; Mazanek, Daniel D.; Koons, Robert H.

    2005-01-01

    The enabling technologies required for the development of a viable Comet/Asteroid Protection System (CAPS) can be divided into two principal areas: detection and deflection/orbit modification. With the proper funding levels, many of the technologies needed to support a CAPS architecture could be achievable within the next 15 to 20 years. In fact, many advanced detection technologies are currently in development for future in-space telescope systems such as the James Webb Space Telescope (JWST), formerly known as the Next Generation Space Telescope. It is anticipated that many of the JWST technologies would be available for application for CAPS detection concepts. Deflection/orbit modification technologies are also currently being studied as part of advanced power and propulsion research. However, many of these technologies, such as extremely high-output power systems, advanced propulsion, heat rejection, and directed energy systems, would likely be farther term in availability than many of the detection technologies. Discussed subsequently is a preliminary examination of the main technologies that have been identified as being essential to providing the element functionality defined during the CAPS conceptual study. The detailed requirements for many of the technology areas are still unknown, and many additional technologies will be identified as future in-depth studies are conducted in this area.

  9. Enabling technologies for industrial energy demand management

    International Nuclear Information System (INIS)

    Dyer, Caroline H.; Hammond, Geoffrey P.; Jones, Craig I.; McKenna, Russell C.

    2008-01-01

    This state-of-science review sets out to provide an indicative assessment of enabling technologies for reducing UK industrial energy demand and carbon emissions to 2050. In the short term, i.e. the period that will rely on current or existing technologies, the road map and priorities are clear. A variety of available technologies will lead to energy demand reduction in industrial processes, boiler operation, compressed air usage, electric motor efficiency, heating and lighting, and ancillary uses such as transport. The prospects for the commercial exploitation of innovative technologies by the middle of the 21st century are more speculative. Emphasis is therefore placed on the range of technology assessment methods that are likely to provide policy makers with a guide to progress in the development of high-temperature processes, improved materials, process integration and intensification, and improved industrial process control and monitoring. Key among the appraisal methods applicable to the energy sector is thermodynamic analysis, making use of energy, exergy and 'exergoeconomic' techniques. Technical and economic barriers will limit the improvement potential to perhaps a 30% cut in industrial energy use, which would make a significant contribution to reducing energy demand and carbon emissions in UK industry. Non-technological drivers for, and barriers to, the take-up of innovative, low-carbon energy technologies for industry are also outlined

  10. Technology enabled evolutions in liquids marketing

    International Nuclear Information System (INIS)

    Manning, S.

    1998-01-01

    Deregulation, mergers, changing economic conditions, and downsizing have captured the headlines in the energy industry in recent times. To say that companies have struggled to react to these changes would be an understatement. Huge trading organizations have grown from nothing in a few years, while entire industry segments have been forced to restructure themselves. Information technology has enabled much of this change. By bringing information management out of the back office and onto the trading floors, companies have radically redesigned their work processes. The future promises even faster change, with business focus turning to innovative packaging of services with products, expanding asset bases, and reducing costs. Information technology will fuel this transformation by providing enterprise-wide trading solutions and, ultimately, linking the entire industry into a virtual supply chain. To remain competitive, companies need a strategy to manage information technology as a core asset

  11. Enabling technologies for oil sands development

    International Nuclear Information System (INIS)

    Bailey, R.T.

    1998-01-01

    A review of oil sands production and expansion possibilities in Alberta were presented. The enabling technologies for oil sands projects include mining (bucketwheels, draglines, trucks, shovels conveyors, slurry hydrotransport); extraction (conditioning tumblers, pipelines, tanks, hot water, caustic, cold water, frothers); froth cleaning (centrifuges, solvent treatment); tailings (tailings ponds, consolidated tailings); and upgrading (coking, hydrotreating for SCO, hydrocracking and multiple products). The enabling technologies for in situ production include cyclic steam stimulation for vertical wells, steam assisted gravity drainage (SAGD) for dual horizontal wells, and cold production with wormholes. This paper described the recovery potentials of each of these processes. It also discussed the role of government and industry in research and cooperative research involving both the private and public sectors. Examples of each of these were described such as SAGD, the OSLO cold water extraction process, The consolidated tailings (CT) project, the low energy extraction process (slurry production, hydrotransport, pipeline conditioning and warm water extraction), and research in fine tailings, to demonstrate that although objectives may differ, government and industry research objectives are complementary

  12. Enabling technology for MEMS and nanodevices

    CERN Document Server

    Baltes, Henry; Fedder, Gary K; Hierold, Christofer; Korvink, Jan G; Tabata, Osamu

    2013-01-01

    This softcover edition of the eponymous volume from the successful ""Advanced Micro & Nanosystems"" series covers all aspects of fabrication of MEMS under CMOS-compatible conditions from design to implementation.It examines the various routes and methods to combine electronics generated by the CMOS technology with novel micromechanical parts into one-chip solutions. Various approaches, fundamental and technological aspects as well as strategies leading to different types of functionalities and presented in detail.For the practicing engineer as well as MSc and PhD students on MEMS cours

  13. Scientific Data Management Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Vouk, Mladen A.

    2013-01-15

    Managing scientific data has been identified by the scientific community as one of the most important emerging needs because of the sheer volume and increasing complexity of data being collected. Effectively generating, managing, and analyzing this information requires a comprehensive, end-to-end approach to data management that encompasses all of the stages from the initial data acquisition to the final analysis of the data. Fortunately, the data management problems encountered by most scientific domains are common enough to be addressed through shared technology solutions. Based on community input, we have identified three significant requirements. First, more efficient access to storage systems is needed. In particular, parallel file system and I/O system improvements are needed to write and read large volumes of data without slowing a simulation, analysis, or visualization engine. These processes are complicated by the fact that scientific data are structured differently for specific application domains, and are stored in specialized file formats. Second, scientists require technologies to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis and searches over extremely large data sets. Specialized feature discovery and statistical analysis techniques are needed before the data can be understood or visualized. Furthermore, interactive analysis requires techniques for efficiently selecting subsets of the data. Finally, generating the data, collecting and storing the results, keeping track of data provenance, data post-processing, and analysis of results is a tedious, fragmented process. Tools for automation of this process in a robust, tractable, and recoverable fashion are required to enhance scientific exploration. The SDM center was established under the SciDAC program to address these issues. The SciDAC-1 Scientific Data Management (SDM) Center succeeded in bringing an initial set of advanced

  14. Enabling technologies for fiber optic sensing

    Science.gov (United States)

    Ibrahim, Selwan K.; Farnan, Martin; Karabacak, Devrez M.; Singer, Johannes M.

    2016-04-01

    In order for fiber optic sensors to compete with electrical sensors, several critical parameters need to be addressed such as performance, cost, size, reliability, etc. Relying on technologies developed in different industrial sectors helps to achieve this goal in a more efficient and cost effective way. FAZ Technology has developed a tunable laser based optical interrogator based on technologies developed in the telecommunication sector and optical transducer/sensors based on components sourced from the automotive market. Combining Fiber Bragg Grating (FBG) sensing technology with the above, high speed, high precision, reliable quasi distributed optical sensing systems for temperature, pressure, acoustics, acceleration, etc. has been developed. Careful design needs to be considered to filter out any sources of measurement drifts/errors due to different effects e.g. polarization and birefringence, coating imperfections, sensor packaging etc. Also to achieve high speed and high performance optical sensing systems, combining and synchronizing multiple optical interrogators similar to what has been used with computer/processors to deliver super computing power is an attractive solution. This path can be achieved by using photonic integrated circuit (PIC) technology which opens the doors to scaling up and delivering powerful optical sensing systems in an efficient and cost effective way.

  15. Wind Energy: Trends And Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Devabhaktuni, Vijay; Alam, Mansoor; Boyapati, Premchand; Chandna, Pankaj; Kumar, Ashok; Lack, Lewis; Nims, Douglas; Wang, Lingfeng

    2010-09-15

    With attention now focused on the damaging impact of greenhouse gases, wind energy is rapidly emerging as a low carbon, resource efficient, cost-effective sustainable technology in many parts of the world. Despite higher economic costs, offshore appears to be the next big step in wind energy development alternative because of the space scarcity for installation of onshore wind turbine. This paper presents the importance of off-shore wind energy, the wind farm layout design, the off-shore wind turbine technological developments, the role of sensors and the smart grid, and the challenges and future trends of wind energy.

  16. Report on the Enabling Technology Programme Optomechatronics

    NARCIS (Netherlands)

    Sadeghian Marnani, H.; Nulkes-de Groot, N.

    2014-01-01

    The last four years the research Programme Optomechatronics focused on the development of new key technologies for manufacturing and testing equipment and scientific instrumentation. The challenge is to develop instruments with higher accuracy, less costs and higher throughput than we can achieve

  17. Provision of enabling technology in professional sports.

    Science.gov (United States)

    McBride, D K

    2000-06-01

    Multiple-round golf tournaments are designed intentionally to separate individuals' scores as play proceeds. Variance analyses and consideration of individual differences (vs group mean effects) for a sample of professional events confirm that 3-, 4-, and 5-round tournaments show significantly increased variability (though stable means) from first to last rounds. It is argued here that the dispersion of scores increases as play proceeds because the more physically or mentally fit players emerge and continue to perform best. Furthermore, a marginal income analysis indicates that the average gain in earnings from a one-shot improvement in score is approximately $8,000. An interpretation based on fatigue, competition, and stress supports the Professional Golf Association's claim that provision of enabling devices, like a golf cart for disabled players, is also an enhancement and is thus unfair.

  18. Evolution of Cloud Computing and Enabling Technologies

    OpenAIRE

    Rabi Prasad Padhy; Manas Ranjan Patra

    2012-01-01

    We present an overview of the history of forecasting software over the past 25 years, concentrating especially on the interaction between computing and technologies from mainframe computing to cloud computing. The cloud computing is latest one. For delivering the vision of  various  of computing models, this paper lightly explains the architecture, characteristics, advantages, applications and issues of various computing models like PC computing, internet computing etc and related technologie...

  19. Emerging technologies for enabling proangiogenic therapy

    International Nuclear Information System (INIS)

    Roy, Rituparna Sinha; Roy, Bhaskar; Sengupta, Shiladitya

    2011-01-01

    Ischemic disease causes a large number of deaths and significant clinical problems worldwide. Therapeutic angiogenesis, strengthened by advances in growth-factor-based therapies, is a promising solution to ischemic pathologies. Major challenges in therapeutic angiogenesis are the lack of stability of native angiogenic proteins and also providing sustained delivery of biologically active proteins at the ischemic sites. This paper will discuss various protein engineering strategies to develop stabilized proangiogenic proteins and several biomaterial technologies used to amplify the angiogenic outcome by delivering biologically active growth factors in a sustained manner.

  20. Emerging technologies for enabling proangiogenic therapy

    Science.gov (United States)

    Sinha Roy, Rituparna; Roy, Bhaskar; Sengupta, Shiladitya

    2011-12-01

    Ischemic disease causes a large number of deaths and significant clinical problems worldwide. Therapeutic angiogenesis, strengthened by advances in growth-factor-based therapies, is a promising solution to ischemic pathologies. Major challenges in therapeutic angiogenesis are the lack of stability of native angiogenic proteins and also providing sustained delivery of biologically active proteins at the ischemic sites. This paper will discuss various protein engineering strategies to develop stabilized proangiogenic proteins and several biomaterial technologies used to amplify the angiogenic outcome by delivering biologically active growth factors in a sustained manner.

  1. Digital technology to enable aging in place.

    Science.gov (United States)

    Kim, Kwang-Il; Gollamudi, Shreya S; Steinhubl, Steven

    2017-02-01

    Aging, both of individuals and populations, presents challenges and opportunities. The multitude of morbidities and disabilities that are a too common component of aging represent significant challenges to individuals, their families and to healthcare systems. Aging in place is the ability to safely and comfortably maintain an independent and high quality of life in one's own home and community and is a highly desirable goal of most individuals with the additional benefit of significantly impacting the impending enormous healthcare burden. In order to make this possible, new care models that take advantage of novel technologies for tracking important physiologic and safety parameters need to be developed and implemented. By thoughtfully doing so, it can be possible to seamlessly provide preventative interventions when and as needed, detect the earliest signs of aggravation of chronic conditions, or identify and respond to any emergency situations, such as falls or cardiac arrest. In contrast to current approaches, caring for elderly individuals in their homes based on a digital technology infrastructure could be effective and cost-saving. In this review, we provide an overview of the characteristics of potential digital solutions applicable to creative aging along with the existing evidence supporting their ability to improve care, increase quality of life, and substantially decrease the emotional and financial costs associated with aging. Copyright © 2016 Elsevier Inc. All rights reserved.

  2. Enabling technologies for demand management: Transport

    International Nuclear Information System (INIS)

    Smith, Roderick A.

    2008-01-01

    Rising transport demand is likely to be the biggest hurdle to reducing our greenhouse gas emissions. Globally and nationally, transport is consuming an ever increasing share of our total energy use. Furthermore, the bulk of energy used in transport comes from the burning of petroleum products. This brief paper summarises options arising from the two routes to reduce energy demand in transport: improved and more efficient use of existing and possible new transport modes, and the reduction of transport demand. In both areas, the prospects in the immediate and longer-term future are hedged with difficulties. Automobiles and aircraft have improved considerably in recent decades, but future improvements are likely to be incremental. The introduction of hydrogen as a fuel is appealing, but there are technical problems to be solved. Active reduction of demand for transport will require a decoupling of the link between demand and growth in gross domestic product. Globally, this will be very difficult to achieve. Various modes of public transport exist that are efficient in terms of their energy use per passenger kilometre. But they need large investments to make them more attractive than the automobile. However, population concentration in mega-cities, allied with congestion, will make such innovation essential. Policy measures can be assisted in their implementation by new technology, but will remain politically problematic

  3. "Design for Somebody" - Approach Enabling Mobile Technology Development.

    Science.gov (United States)

    Sirkka, Andrew; Merilampi, Sari; Koivisto, Antti; Tommiska, Janika; Saarinen, Tatu-Pekka

    2017-01-01

    This paper presents case examples of Design for Somebody (DfS) philosophy used both in developing novel technologies and modifying existing main stream technologies applicable for users with special needs. DfS embodies variety of mobile technology approaches to generate personalised means to enable and motivate physical, cognitive and social skills development.

  4. Extending green technology innovations to enable greener fabs

    Science.gov (United States)

    Takahisa, Kenji; Yoo, Young Sun; Fukuda, Hitomi; Minegishi, Yuji; Enami, Tatsuo

    2015-03-01

    Semiconductor manufacturing industry has growing concerns over future environmental impacts as fabs expand and new generations of equipment become more powerful. Especially rare gases supply and price are one of prime concerns for operation of high volume manufacturing (HVM) fabs. Over the past year it has come to our attention that Helium and Neon gas supplies could be unstable and become a threat to HVM fabs. To address these concerns, Gigaphoton has implemented various green technologies under its EcoPhoton program. One of the initiatives is GigaTwin deep ultraviolet (DUV) lithography laser design which enables highly efficient and stable operation. Under this design laser systems run with 50% less electric energy and gas consumption compared to conventional laser designs. In 2014 we have developed two technologies to further reduce electric energy and gas efficiency. The electric energy reduction technology is called eGRYCOS (enhanced Gigaphoton Recycled Chamber Operation System), and it reduces electric energy by 15% without compromising any of laser performances. eGRYCOS system has a sophisticated gas flow design so that we can reduce cross-flow-fan rotation speed. The gas reduction technology is called eTGM (enhanced Total gas Manager) and it improves gas management system optimizing the gas injection and exhaust amount based on laser performances, resulting in 50% gas savings. The next steps in our roadmap technologies are indicated and we call for potential partners to work with us based on OPEN INNOVATION concept to successfully develop faster and better solutions in all possible areas where green innovation may exist.

  5. An overview of enabling technology research in the United States

    International Nuclear Information System (INIS)

    Baker, Charles C.

    2002-01-01

    The mission of the US Fusion Energy Sciences Program is to advance plasma science, fusion science, and fusion technology--the knowledge base needed for an economically and environmentally attractive fusion energy source. In support of this overall mission, the Enabling Technology Program in the US incorporates both near and long term R and D, contributes to material and engineering sciences as well as technology development, contributes to spin-off applications, and performs global systems assessments and focused design studies. This work supports both magnetic and inertial fusion energy (IFE) concepts. The Enabling Technology research mission is to contribute to the national science and technology base by developing the enabling technology for existing and next-step experimental devices, by exploring and understanding key materials and technology feasibility issues for attractive fusion power sources, by conducting advanced design studies that integrate the wealth of our understanding to guide R and D priorities and by developing design solutions for next-step and future devices. The Enabling Technology Program Plan is organized around five elements: plasma technologies, fusion (chamber) technologies, materials sciences, advanced design, and IFE chamber and target technologies. The principal technical features and research objectives are described for each element

  6. Physician communication via Internet-enabled technology: A systematic review.

    Science.gov (United States)

    Barr, Neil G; Randall, Glen E; Archer, Norman P; Musson, David M

    2017-10-01

    The use of Internet-enabled technology (information and communication technology such as smartphone applications) may enrich information exchange among providers and, consequently, improve health care delivery. The purpose of this systematic review was to gain a greater understanding of the role that Internet-enabled technology plays in enhancing communication among physicians. Studies were identified through a search in three electronic platforms: the Association for Computing Machinery Digital Library, ProQuest, and Web of Science. The search identified 5140 articles; of these, 21 met all inclusion criteria. In general, physicians were satisfied with Internet-enabled technology, but consensus was lacking regarding whether Internet-enabled technology improved efficiency or made a difference to clinical decision-making. Internet-enabled technology can play an important role in enhancing communication among physicians, but the extent of that benefit is influenced by (1) the impact of Internet-enabled technology on existing work practices, (2) the availability of adequate resources, and (3) the nature of institutional elements, such as privacy legislation.

  7. Distributed Collaborative Learning Communities Enabled by Information Communication Technology

    NARCIS (Netherlands)

    H.L. Alvarez (Heidi Lee)

    2006-01-01

    textabstractHow and why can Information Communication Technology (ICT) contribute to enhancing learning in distributed Collaborative Learning Communities (CLCs)? Drawing from relevant theories concerned with phenomenon of ICT enabled distributed collaborative learning, this book identifies gaps in

  8. Nano-enabled environmental products and technologies - opportunities and drawbacks

    DEFF Research Database (Denmark)

    Møller Christensen, Frans; Brinch, Anna; Kjølholt, Jesper

    The project aims to investigate the benefits for health and environment that the use of nanomaterials in products and technologies may have. More specifically, the project provides an overview of the most relevant nano-enabled environmental technologies, different types of products and technologies...... on the (Danish) market, as well as products and technologies, which are still in R&D and it will provide a qualitative overview of health and environmental pros and cons of these technologies. The project has focused on technologies applied in: 1) purification of water and wastewater, 2) remediation of soil...

  9. Key enabling technologies (Kets) observatory. Second report December 2015

    OpenAIRE

    Velde, Els van de; Pieterjan, Debergh; Wydra, Sven; Som, Oliver; Heide, Marcel de

    2015-01-01

    Key Enabling Technologies (KETs) provide the basis for innovation in a wide range of products and processes across all industrial sectors (emerging and traditional) and are essential to solve Europe’s major societal challenges. Six KETs have been identified as important for Europe’s future competitiveness: Advanced Manufacturing Technology, Advanced Materials, Nanotechnology, Micro- and Nanoelectronics, Industrial Biotechnology, and Photonics.

  10. SciDAC Visualization and Analytics Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Joy, Kenneth I. [Univ. of California, Davis, CA (United States)

    2014-09-14

    This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an "information big bang," which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies.

  11. Radiation technology enabled market access to Indian mango

    International Nuclear Information System (INIS)

    Sharma, Arun

    2009-01-01

    International trade in agricultural produce is subject to quarantine barriers imposed by importing countries to limit the entry of exotic pests and pathogens. Radiation technology provides an effective alternative to fumigants which are being gradually phased out. The technology has enabled market access to Indian mangoes in the US market after a gap of 18 years. The technology provides opportunity for export of other fruits and vegetables as well to countries like US, Australia and New Zealand. (author)

  12. Advanced excimer laser technologies enable green semiconductor manufacturing

    Science.gov (United States)

    Fukuda, Hitomi; Yoo, Youngsun; Minegishi, Yuji; Hisanaga, Naoto; Enami, Tatsuo

    2014-03-01

    "Green" has fast become an important and pervasive topic throughout many industries worldwide. Many companies, especially in the manufacturing industries, have taken steps to integrate green initiatives into their high-level corporate strategies. Governments have also been active in implementing various initiatives designed to increase corporate responsibility and accountability towards environmental issues. In the semiconductor manufacturing industry, there are growing concerns over future environmental impact as enormous fabs expand and new generation of equipments become larger and more powerful. To address these concerns, Gigaphoton has implemented various green initiatives for many years under the EcoPhoton™ program. The objective of this program is to drive innovations in technology and services that enable manufacturers to significantly reduce both the financial and environmental "green cost" of laser operations in high-volume manufacturing environment (HVM) - primarily focusing on electricity, gas and heat management costs. One example of such innovation is Gigaphoton's Injection-Lock system, which reduces electricity and gas utilization costs of the laser by up to 50%. Furthermore, to support the industry's transition from 300mm to the next generation 450mm wafers, technologies are being developed to create lasers that offer double the output power from 60W to 120W, but reducing electricity and gas consumption by another 50%. This means that the efficiency of lasers can be improve by up to 4 times in 450mm wafer production environments. Other future innovations include the introduction of totally Heliumfree Excimer lasers that utilize Nitrogen gas as its replacement for optical module purging. This paper discusses these and other innovations by Gigaphoton to enable green manufacturing.

  13. Emergent information technologies and enabling policies for counter-terrorism

    CERN Document Server

    Popp, R

    2006-01-01

    Explores both counter-terrorism and enabling policy dimensions of emerging information technologies in national security After the September 11th attacks, "connecting the dots" has become the watchword for using information and intelligence to protect the United States from future terrorist attacks. Advanced and emerging information technologies offer key assets in confronting a secretive, asymmetric, and networked enemy. Yet, in a free and open society, policies must ensure that these powerful technologies are used responsibly, and that privacy and civil liberties remain protected. Emergent Information Technologies and Enabling Policies for Counter-Terrorism provides a unique, integrated treatment of cutting-edge counter-terrorism technologies and their corresponding policy options. Featuring contributions from nationally recognized authorities and experts, this book brings together a diverse knowledge base for those charged with protecting our nation from terrorist attacks while preserving our civil liberti...

  14. The ENABLER---based on proven NERVA technology

    International Nuclear Information System (INIS)

    Livingston, J.M.; Pierce, B.L.

    1991-01-01

    The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial Mass In Low Earth Orbit (IMLEO) and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tomorrow's space propulsion needs

  15. The Value of RFID Technology Enabled Information to Manage Perishables

    NARCIS (Netherlands)

    M.E. Ketzenberg (Michael); J.M. Bloemhof-Ruwaard (Jacqueline)

    2009-01-01

    textabstractWe address the value of RFID technology enabled information to manage perishables in the context of a supplier that sells a random lifetime product subject to stochastic demand and lost sales. The product's lifetime is largely determined by the time and temperature history in the supply

  16. Concept relation discovery and innovation enabling technology (CORDIET)

    NARCIS (Netherlands)

    Poelmans, J.; Elzinga, P.; Neznanov, A.; Viaene, S.; Kuznetsov, S.O.; Ignatov, D.; Dedene, G.

    2011-01-01

    Concept Relation Discovery and Innovation Enabling Technology (CORDIET), is a toolbox for gaining new knowledge from unstructured text data. At the core of CORDIET is the C-K theory which captures the essential elements of innovation. The tool uses Formal Concept Analysis (FCA), Emergent Self

  17. Designing Technology-Enabled Instruction to Utilize Learning Analytics

    Science.gov (United States)

    Davies, Randall; Nyland, Robert; Bodily, Robert; Chapman, John; Jones, Brian; Young, Jay

    2017-01-01

    A key notion conveyed by those who advocate for the use of data to enhance instruction is an awareness that learning analytics has the potential to improve instruction and learning but is not currently reaching that potential. Gibbons (2014) suggested that a lack of learning facilitated by current technology-enabled instructional systems may be…

  18. The Role of Technology as an Enabler in Job Redesign

    Directory of Open Access Journals (Sweden)

    David M. Savino

    2009-10-01

    Full Text Available This paper is an acknowledgement of the role of technology as an enabler that encourages the constant need to evaluate, update and employ changing job descriptions and business processes that truly acknowledge job requirements as they are versus notions of what they have been or should be. Advancements in technology have brought about a significant amount of change in terms of how we go about doing our daily work. The evolution from being a manufacturing economy to being information and service based brought to the workplace new realities and responsibilities. As a result, workers can no longer expect to be given a specific listing of assigned duties and tasks that remain fixed over a long period of time. The new paradigm in the workplace relies on continuous demands for improvement and acquired knowledge in a dynamic environment. The catalyst that enables continuous improvement is technology.

  19. ENABLING SMART MANUFACTURING TECHNOLOGIES FOR DECISION-MAKING SUPPORT

    Science.gov (United States)

    Helu, Moneer; Libes, Don; Lubell, Joshua; Lyons, Kevin; Morris, KC

    2017-01-01

    Smart manufacturing combines advanced manufacturing capabilities and digital technologies throughout the product lifecycle. These technologies can provide decision-making support to manufacturers through improved monitoring, analysis, modeling, and simulation that generate more and better intelligence about manufacturing systems. However, challenges and barriers have impeded the adoption of smart manufacturing technologies. To begin to address this need, this paper defines requirements for data-driven decision making in manufacturing based on a generalized description of decision making. Using these requirements, we then focus on identifying key barriers that prevent the development and use of data-driven decision making in industry as well as examples of technologies and standards that have the potential to overcome these barriers. The goal of this research is to promote a common understanding among the manufacturing community that can enable standardization efforts and innovation needed to continue adoption and use of smart manufacturing technologies. PMID:28649678

  20. Can Mobile Technology Enable Knowledge Communication in a Learning Environment?

    DEFF Research Database (Denmark)

    Kampf, Constance; Islas Sedano, Carolina

    2008-01-01

    this mobile phone game to help next years' students navigated the CampusNet system in order to study for the exam.  The CampusNet system can be seen as a knowledge management technology situated within the social context of the Project Management course, and so the examples offered, in effect, demonstrate...... To be effective, knowledge management systems need to encompass both social processes and technical components (McDermott 2000),   On the other hand, knowledge communication as a concept has emerged not from the inspiration of technology, but partly from the social-technical challenge of dealing...... with technology in knowledge management systems.  So, is knowledge communication a process that can be technologically enabled?  In this presentation, we explore the possibilities of socio-technical interaction for knowledge communication through the use of a mobile phone game as a knowledge communication tool...

  1. Enabling fast charging – A battery technology gap assessment

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, Shabbir; Bloom, Ira; Jansen, Andrew N.; Tanim, Tanvir; Dufek, Eric J.; Pesaran, Ahmad; Burnham, Andrew; Carlson, Richard B.; Dias, Fernando; Hardy, Keith; Keyser, Matthew; Kreuzer, Cory; Markel, Anthony; Meintz, Andrew; Michelbacher, Christopher; Mohanpurkar, Manish; Nelson, Paul A.; Robertson, David C.; Scoffield, Don; Shirk, Matthew; Stephens, Thomas; Vijayagopal, Ram; Zhang, Jiucai

    2017-11-01

    The battery technology literature is reviewed, with an emphasis on key elements that limit extreme fast charging. Key gaps in existing elements of the technology are presented as well as developmental needs. Among these needs are advanced models and methods to detect and prevent lithium plating; new positive-electrode materials which are less prone to stress-induced failure; better electrode designs to accommodate very rapid diffusion in and out of the electrode; measure temperature distributions during fast charge to enable / validate models; and develop thermal management and pack designs to accommodate the higher operating voltage.

  2. SciDAC visualization and analytics center for enabling technology

    International Nuclear Information System (INIS)

    Bethel, E Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci, Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jeremy; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier

    2007-01-01

    The Visualization and Analytics Center for Enabling Technologies (VACET) focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang,' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision of VACET is to adapt, extend, create when necessary, and deploy visual data analysis solutions that are responsive to the needs of DOE's computational and experimental scientists. Our center is engineered to be directly responsive to those needs and to deliver solutions for use in DOE's large open computing facilities. The research and development directly target data understanding problems provided by our scientific application stakeholders. VACET draws from a diverse set of visualization technology ranging from production quality applications and application frameworks to state-of-the-art algorithms for visualization, analysis, analytics, data manipulation, and data management

  3. Cognitive Heterogeneous Reconfigurable Optical Networks (CHRON): Enabling Technologies and Techniques

    DEFF Research Database (Denmark)

    Tafur Monroy, Idelfonso; Zibar, Darko; Guerrero Gonzalez, Neil

    2011-01-01

    We present the approach of cognition applied to heterogeneous optical networks developed in the framework of the EU project CHRON: Cognitive Heterogeneous Reconfigurable Optical Network. We introduce and discuss in particular the technologies and techniques that will enable a cognitive optical...... network to observe, act, learn and optimizes its performance, taking into account its high degree of heterogeneity with respect to quality of service, transmission and switching techniques....

  4. Health and aged care enabled by information technology.

    Science.gov (United States)

    Soar, Jeffrey; Seo, Youngjoon

    2007-10-01

    One of the challenges facing health and welfare policymakers as well as researchers in most developed countries is the increasing demand for aging services and aged care. Low birth rates and rapid increases in the percentages of elderly people make aging and aged care one of the top-priority issues among the national agenda of many countries. The responses of governments have included initiatives to extend productive working lives and promote self-funded retirement; to promote healthy, active aging; and to encourage more care to be delivered in home and community settings. Technology will be a major enabler of these strategies. People requiring health services are increasingly being offered more care in their own homes and community settings as an alternative to hospital admission and to delay or avoid moving into institutional care. Research is providing intelligent technology to enable care in the home as well as to monitor safety, security, and quality. Innovation will provide greater independence and better access to care in their own homes for the elderly, sufferers of chronic illness, and persons with disability and reduce the incidence of hospital admissions and the length of stay when admissions do occur. Technologies will support families and professional caregivers and are expected to reduce costs. This paper reports on developments in technology to support care for the aged in home and community settings.

  5. Multi-dimensional technology-enabled social learning approach

    DEFF Research Database (Denmark)

    Petreski, Hristijan; Tsekeridou, Sofia; Prasad, Neeli R.

    2013-01-01

    ’t respond to this systemic and structural changes and/or challenges and retains its status quo than it is jeopardizing its own existence or the existence of the education, as we know it. This paper aims to precede one step further by proposing a multi-dimensional approach for technology-enabled social...... in learning while socializing within their learning communities. However, their “educational” usage is still limited to facilitation of online learning communities and to collaborative authoring of learning material complementary to existing formal (e-) learning services. If the educational system doesn...

  6. Enabling technologies built on a sonochemical platform: challenges and opportunities.

    Science.gov (United States)

    Cintas, Pedro; Tagliapietra, Silvia; Caporaso, Marina; Tabasso, Silvia; Cravotto, Giancarlo

    2015-07-01

    Scientific and technological progress now occurs at the interface between two or more scientific and technical disciplines while chemistry is intertwined with almost all scientific domains. Complementary and synergistic effects have been found in the overlay between sonochemistry and other enabling technologies such as mechanochemistry, microwave chemistry and flow-chemistry. Although their nature and effects are intrinsically different, these techniques share the ability to significantly activate most chemical processes and peculiar phenomena. These studies offer a comprehensive overview of sonochemistry, provide a better understanding of correlated phenomena (mechanochemical effects, hot spots, etc.), and pave the way for emerging applications which unite hybrid reactors. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. New dynamic silicon photonic components enabled by MEMS technology

    Science.gov (United States)

    Errando-Herranz, Carlos; Edinger, Pierre; Colangelo, Marco; Björk, Joel; Ahmed, Samy; Stemme, Göran; Niklaus, Frank; Gylfason, Kristinn B.

    2018-02-01

    Silicon photonics is the study and application of integrated optical systems which use silicon as an optical medium, usually by confining light in optical waveguides etched into the surface of silicon-on-insulator (SOI) wafers. The term microelectromechanical systems (MEMS) refers to the technology of mechanics on the microscale actuated by electrostatic actuators. Due to the low power requirements of electrostatic actuation, MEMS components are very power efficient, making them well suited for dense integration and mobile operation. MEMS components are conventionally also implemented in silicon, and MEMS sensors such as accelerometers, gyros, and microphones are now standard in every smartphone. By combining these two successful technologies, new active photonic components with extremely low power consumption can be made. We discuss our recent experimental work on tunable filters, tunable fiber-to-chip couplers, and dynamic waveguide dispersion tuning, enabled by the marriage of silicon MEMS and silicon photonics.

  8. Enabling Technologies for Characterizing Exoplanet Systems with Exo-C

    Science.gov (United States)

    Cahoy, Kerri Lynn; Belikov, Ruslan; Stapelfeldt, Karl R.; Chakrabarti, Supriya; Trauger, John T.; Serabyn, Eugene; McElwain, Michael W.; Pong, Christopher M.; Brugarolas, Paul

    2015-01-01

    The Exoplanet Science and Technology Definition Team's Internal Coronagraph mission design, called 'Exo-C', utilizes several technologies that have advanced over the past decade with support from the Exoplanet Exploration Program. Following the flow of photons through the telescope, the science measurement is enabled by (i) a precision pointing system to keep the target exoplanet system precisely positioned on the detector during the integration time, (ii) high-performance coronagraphs to block the parent star's light so that the planet's reflected light can be detected, (iii) a wavefront control system to compensate for any wavefront errors such as those due to thermal or mechanical deformations in the optical path, especially errors with high spatial frequencies that could cause contrast-reducing speckles, and (iv) an integral field spectrograph (IFS) that provides moderate resolution spectra of the target exoplanets, permitting their characterization and comparison with models and other data sets. Technologies such as the wavefront control system and coronagraphs will also benefit from other funded efforts in progress, such as the Wide Field Infrared Survey Telescope Astrophysics Focused Telescope Assets (WFIRST-AFTA) program. Similarly, the Exo-C IFS will benefit from the Prototype Imaging Spectrograph for Coronagraphic Exoplanet Studies (PISCES) demonstration. We present specific examples for each of these technologies showing that the state of the art has advanced to levels that will meet the overall scientific, cost, and schedule requirements of the Exo-C mission. These capabilities have matured with testbed and/or ground-telescope demonstrations and have reached a technological readiness level (TRL) that supports their inclusion in the baseline design for potential flight at the end of this decade. While additional work remains to build and test flight-like components (that concurrently meet science as well as size, weight, power, and environmental

  9. Review of Enabling Technologies to Facilitate Secure Compute Customization

    Energy Technology Data Exchange (ETDEWEB)

    Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pelfrey, Daniel S [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL

    2014-12-01

    High performance computing environments are often used for a wide variety of workloads ranging from simulation, data transformation and analysis, and complex workflows to name just a few. These systems may process data for a variety of users, often requiring strong separation between job allocations. There are many challenges to establishing these secure enclaves within the shared infrastructure of high-performance computing (HPC) environments. The isolation mechanisms in the system software are the basic building blocks for enabling secure compute enclaves. There are a variety of approaches and the focus of this report is to review the different virtualization technologies that facilitate the creation of secure compute enclaves. The report reviews current operating system (OS) protection mechanisms and modern virtualization technologies to better understand the performance/isolation properties. We also examine the feasibility of running ``virtualized'' computing resources as non-privileged users, and providing controlled administrative permissions for standard users running within a virtualized context. Our examination includes technologies such as Linux containers (LXC [32], Docker [15]) and full virtualization (KVM [26], Xen [5]). We categorize these different approaches to virtualization into two broad groups: OS-level virtualization and system-level virtualization. The OS-level virtualization uses containers to allow a single OS kernel to be partitioned to create Virtual Environments (VE), e.g., LXC. The resources within the host's kernel are only virtualized in the sense of separate namespaces. In contrast, system-level virtualization uses hypervisors to manage multiple OS kernels and virtualize the physical resources (hardware) to create Virtual Machines (VM), e.g., Xen, KVM. This terminology of VE and VM, detailed in Section 2, is used throughout the report to distinguish between the two different approaches to providing virtualized execution

  10. Research Data Reusability: Conceptual Foundations, Barriers and Enabling Technologies

    Directory of Open Access Journals (Sweden)

    Costantino Thanos

    2017-01-01

    Full Text Available High-throughput scientific instruments are generating massive amounts of data. Today, one of the main challenges faced by researchers is to make the best use of the world’s growing wealth of data. Data (reusability is becoming a distinct characteristic of modern scientific practice. By data (reusability, we mean the ease of using data for legitimate scientific research by one or more communities of research (consumer communities that is produced by other communities of research (producer communities. Data (reusability allows the reanalysis of evidence, reproduction and verification of results, minimizing duplication of effort, and building on the work of others. It has four main dimensions: policy, legal, economic and technological. The paper addresses the technological dimension of data reusability. The conceptual foundations of data reuse as well as the barriers that hamper data reuse are presented and discussed. The data publication process is proposed as a bridge between the data author and user and the relevant technologies enabling this process are presented.

  11. A review of the Technologies Enabling Agile Manufacturing program

    Energy Technology Data Exchange (ETDEWEB)

    Gray, W.H.; Neal, R.E.; Cobb, C.K.

    1996-10-01

    Addressing a technical plan developed in consideration with major US manufacturers, software and hardware providers, and government representatives, the Technologies Enabling Agile Manufacturing (TEAM) program is leveraging the expertise and resources of industry, universities, and federal agencies to develop, integrate, and deploy leap-ahead manufacturing technologies. One of the TEAM program`s goals is to transition products from design to production faster, more efficiently, and at less cost. TEAM`s technology development strategy also provides all participants with early experience in establishing and working within an electronic enterprise that includes access to high-speed networks and high-performance computing and storage systems. The TEAM program uses the cross-cutting tools it collects, develops, and integrates to demonstrate and deploy agile manufacturing capabilities for three high-priority processes identified by industry: material removal, sheet metal forming, electro-mechanical assembly. This paper reviews the current status of the TEAM program with emphasis upon TEAM`s information infrastructure.

  12. Stratified charge rotary engine critical technology enablement. Volume 2: Appendixes

    Science.gov (United States)

    Irion, C. E.; Mount, R. E.

    1992-01-01

    This second volume of appendixes is a companion to Volume 1 of this report which summarizes results of a critical technology enablement effort with the stratified charge rotary engine (SCRE) focusing on a power section of 0.67 liters (40 cu. in.) per rotor in single and two rotor versions. The work is a continuation of prior NASA Contracts NAS3-23056 and NAS3-24628. Technical objectives are multi-fuel capability, including civil and military jet fuel and DF-2, fuel efficiency of 0.355 Lbs/BHP-Hr. at best cruise condition above 50 percent power, altitude capability of up to 10Km (33,000 ft.) cruise, 2000 hour TBO and reduced coolant heat rejection. Critical technologies for SCRE's that have the potential for competitive performance and cost in a representative light-aircraft environment were examined. Objectives were: the development and utilization of advanced analytical tools, i.e. higher speed and enhanced three dimensional combustion modeling; identification of critical technologies; development of improved instrumentation; and to isolate and quantitatively identify the contribution to performance and efficiency of critical components or subsystems. A family of four-stage third-order explicit Runge-Kutta schemes is derived that required only two locations and has desirable stability characteristics. Error control is achieved by embedding a second-order scheme within the four-stage procedure. Certain schemes are identified that are as efficient and accurate as conventional embedded schemes of comparable order and require fewer storage locations.

  13. Stratified Charge Rotary Engine Critical Technology Enablement, Volume 1

    Science.gov (United States)

    Irion, C. E.; Mount, R. E.

    1992-01-01

    This report summarizes results of a critical technology enablement effort with the stratified charge rotary engine (SCRE) focusing on a power section of 0.67 liters (40 cu. in.) per rotor in single and two rotor versions. The work is a continuation of prior NASA Contracts NAS3-23056 and NAS3-24628. Technical objectives are multi-fuel capability, including civil and military jet fuel and DF-2, fuel efficiency of 0.355 Lbs/BHP-Hr. at best cruise condition above 50 percent power, altitude capability of up to 10Km (33,000 ft.) cruise, 2000 hour TBO and reduced coolant heat rejection. Critical technologies for SCRE's that have the potential for competitive performance and cost in a representative light-aircraft environment were examined. Objectives were: the development and utilization of advanced analytical tools, i.e. higher speed and enhanced three dimensional combustion modeling; identification of critical technologies; development of improved instrumentation, and to isolate and quantitatively identify the contribution to performance and efficiency of critical components or subsystems.

  14. Enabling Campus Grids with Open Science Grid Technology

    International Nuclear Information System (INIS)

    Weitzel, Derek; Fraser, Dan; Pordes, Ruth; Bockelman, Brian; Swanson, David

    2011-01-01

    The Open Science Grid is a recognized key component of the US national cyber-infrastructure enabling scientific discovery through advanced high throughput computing. The principles and techniques that underlie the Open Science Grid can also be applied to Campus Grids since many of the requirements are the same, even if the implementation technologies differ. We find five requirements for a campus grid: trust relationships, job submission, resource independence, accounting, and data management. The Holland Computing Center's campus grid at the University of Nebraska-Lincoln was designed to fulfill the requirements of a campus grid. A bridging daemon was designed to bring non-Condor clusters into a grid managed by Condor. Condor features which make it possible to bridge Condor sites into a multi-campus grid have been exploited at the Holland Computing Center as well.

  15. Enabling campus grids with open science grid technology

    Energy Technology Data Exchange (ETDEWEB)

    Weitzel, Derek [Nebraska U.; Bockelman, Brian [Nebraska U.; Swanson, David [Nebraska U.; Fraser, Dan [Argonne; Pordes, Ruth [Fermilab

    2011-01-01

    The Open Science Grid is a recognized key component of the US national cyber-infrastructure enabling scientific discovery through advanced high throughput computing. The principles and techniques that underlie the Open Science Grid can also be applied to Campus Grids since many of the requirements are the same, even if the implementation technologies differ. We find five requirements for a campus grid: trust relationships, job submission, resource independence, accounting, and data management. The Holland Computing Center's campus grid at the University of Nebraska-Lincoln was designed to fulfill the requirements of a campus grid. A bridging daemon was designed to bring non-Condor clusters into a grid managed by Condor. Condor features which make it possible to bridge Condor sites into a multi-campus grid have been exploited at the Holland Computing Center as well.

  16. Enabling technologies and green processes in cyclodextrin chemistry

    Directory of Open Access Journals (Sweden)

    Giancarlo Cravotto

    2016-02-01

    Full Text Available The design of efficient synthetic green strategies for the selective modification of cyclodextrins (CDs is still a challenging task. Outstanding results have been achieved in recent years by means of so-called enabling technologies, such as microwaves, ultrasound and ball mills, that have become irreplaceable tools in the synthesis of CD derivatives. Several examples of sonochemical selective modification of native α-, β- and γ-CDs have been reported including heterogeneous phase Pd- and Cu-catalysed hydrogenations and couplings. Microwave irradiation has emerged as the technique of choice for the production of highly substituted CD derivatives, CD grafted materials and polymers. Mechanochemical methods have successfully furnished greener, solvent-free syntheses and efficient complexation, while flow microreactors may well improve the repeatability and optimization of critical synthetic protocols.

  17. Demand Response Advanced Controls Framework and Assessment of Enabling Technology Costs

    Energy Technology Data Exchange (ETDEWEB)

    Potter, Jennifer; Cappers, Peter

    2017-08-28

    The Demand Response Advanced Controls Framework and Assessment of Enabling Technology Costs research describe a variety of DR opportunities and the various bulk power system services they can provide. The bulk power system services are mapped to a generalized taxonomy of DR “service types”, which allows us to discuss DR opportunities and bulk power system services in fewer yet broader categories that share similar technological requirements which mainly drive DR enablement costs. The research presents a framework for the costs to automate DR and provides descriptions of the various elements that drive enablement costs. The report introduces the various DR enabling technologies and end-uses, identifies the various services that each can provide to the grid and provides the cost assessment for each enabling technology. In addition to a report, this research includes a Demand Response Advanced Controls Database and User Manual. They are intended to provide users with the data that underlies this research and instructions for how to use that database more effectively and efficiently.

  18. Enabling optimal energy options under the Clean Development Mechanism

    International Nuclear Information System (INIS)

    Gilau, Asmerom M.; Van Buskirk, Robert; Small, Mitchell J.

    2007-01-01

    This paper addresses the cost effectiveness of renewable energy technologies in achieving low abatement costs and promoting sustainable developments under the Clean Development Mechanism (CDM). According to the results of our optimal energy option's analysis, at project scale, compared with a diesel-only energy option, photovoltaic (PV)-diesel (PVDB), wind-diesel (WDB) and PV-wind-diesel (PVWDB) hybrids are very cost-effective energy options. Moreover, energy options with high levels of renewable energy, including 100% renewables, have the lowest net present cost and they are already cost effective without CDM. On the other hand, while the removal of about 87% carbon dioxide emissions could be achieved at negative cost, initial investment could increase by a factor of 40, which is one of the primary barriers hindering wider renewable energy applications in developing countries, among others. Thus, in order to increase developing countries' participation in the carbon market, CDM policy should shift from a purely market-oriented approach to investigating how to facilitate renewable energy projects through barrier removal. Thus, we recommend that further research should focus on how to efficiently remove renewable energy implementation barriers as a means to improve developing countries' participation in meaningful emission reduction while at the same time meeting the needs of sustainable economic development

  19. Ultrafast disk technology enables next generation micromachining laser sources

    Science.gov (United States)

    Heckl, Oliver H.; Weiler, Sascha; Luzius, Severin; Zawischa, Ivo; Sutter, Dirk

    2013-02-01

    Ultrashort pulsed lasers based on thin disk technology have entered the 100 W regime and deliver several tens of MW peak power without chirped pulse amplification. Highest uptime and insensitivity to back reflections make them ideal tools for efficient and cost effective industrial micromachining. Frequency converted versions allow the processing of a large variety of materials. On one hand, thin disk oscillators deliver more than 30 MW peak power directly out of the resonator in laboratory setups. These peak power levels are made possible by recent progress in the scaling of the pulse energy in excess of 40 μJ. At the corresponding high peak intensity, thin disk technology profits from the limited amount of material and hence the manageable nonlinearity within the resonator. Using new broadband host materials like for example the sesquioxides will eventually reduce the pulse duration during high power operation and further increase the peak power. On the other hand industry grade amplifier systems deliver even higher peak power levels. At closed-loop controlled 100W, the TruMicro Series 5000 currently offers the highest average ultrafast power in an industry proven product, and enables efficient micromachining of almost any material, in particular of glasses, ceramics or sapphire. Conventional laser cutting of these materials often requires UV laser sources with pulse durations of several nanoseconds and an average power in the 10 W range. Material processing based on high peak power laser sources makes use of multi-photon absorption processes. This highly nonlinear absorption enables micromachining driven by the fundamental (1030 nm) or frequency doubled (515 nm) wavelength of Yb:YAG. Operation in the IR or green spectral range reduces the complexity and running costs of industrial systems initially based on UV light sources. Where UV wavelength is required, the TruMicro 5360 with a specified UV crystal life-time of more than 10 thousand hours of continues

  20. Transformative Learning: Patterns of Psychophysiologic Response and Technology-Enabled Learning and Intervention Systems

    Science.gov (United States)

    2008-09-01

    Psychophysiologic Response and Technology -Enabled Learning and Intervention Systems PRINCIPAL INVESTIGATOR: Leigh W. Jerome, Ph.D...NUMBER Transformative Learning : Patterns of Psychophysiologic Response and Technology - Enabled Learning and Intervention Systems 5b. GRANT NUMBER...project entitled “Transformative Learning : Patterns of Psychophysiologic Response in Technology Enabled Learning and Intervention Systems.” The

  1. Barriers affecting successful technology enablement of supply chain: An Indian perspective

    Science.gov (United States)

    Arora, R.; Haleem, A.; Farooquie, J. A.

    2018-03-01

    In order to compete, organizations need to focus on improving supply chain and technology acts as a major enabler. Technology enablement of supply chain has not always been successful and has been examined by many researchers. The purpose of this paper is to do a systematic literature review of technology enabled supply chain from a strategic viewpoint. The literature is examined from two perspectives. Firstly, it studies the growing interest in technology-enabled supply chain in India. Secondly, it studies barriers affecting technology enablement of supply chain. The literature review identifies that technology enabled supply chain helps in improving performance via effective decision making, monitoring entire supply chain, faster reaction to customer service problems, etc. The research has emphasized the importance of 12 barriers affecting technology enablement. This research will help as a guide for practitioners in order to successfully implement technology and fills the gap in existing literature by highlighting and consolidating the significant research work done in past.

  2. Perception of Information Technology Enablers for Effective Supply Chain Management

    NARCIS (Netherlands)

    Fedor Brookman; Jakobus Smit; Gilbert Gilbert Silvius

    2012-01-01

    This paper reports a study on the importance of enablers in order for IT to support effective supply chain management, as perceived defined by different positions in the supply chain. In the study, a significant difference for the enabler “Funds for IT enablement” is found between the supplier

  3. Enabling Logistics With Portable and Wireless Technology Study. Volume 1

    Science.gov (United States)

    2004-08-06

    Players41 Tag Vendors Reader Vendors Software Players Early Adopters Alien Technology Corporation Intermec Technologies Corp. Descartes Systems...e at pa ion rt s s /st be an co d m ar e ds s rene l availability of interopera le s e demands of EPC isc ot a bro f a er b labl as te is, c...Intermec Technologies Corp. Descartes Systems Boeing Intermec Technologies Corp. Matrics Inc. EXE Technologies CHEP Matrics Inc. Psion Teklogix Inc

  4. CERAMIC MEMBRANE ENABLING TECHNOLOGY FOR IMPROVED IGCC EFFICIENCY

    International Nuclear Information System (INIS)

    Ravi Prasad

    2000-01-01

    The objective of this program is to conduct a technology development program to advance the state-of-the-art in ceramic Oxygen Transport Membranes (OTM) to the level required to produce step change improvements in process economics, efficiency, and environmental benefits for commercial IGCC systems and other applications. The IGCC program is focused on addressing key issues in materials, processing, manufacturing, engineering and system development that will make the OTM a commercial reality. The objective of the OTM materials development task is to identify a suitable material that can be formed into a thin film to produce the target oxygen flux. This requires that the material have an adequate permeation rate, and thermo-mechanical and thermo-chemical properties such that the material is able to be supported on the desired substrate and sufficient mechanical strength to survive the stresses involved in operation. The objective of the composite OTM development task is to develop the architecture and fabrication techniques necessary to construct stable, high performance, thin film OTMs supported on suitable porous, load bearing substrates. The objective of the process development task of this program to demonstrate the program objectives on a single OTM tube under test conditions simulating those of the optimum process cycle for the power plant

  5. GeoPro: Technology to Enable Scientific Modeling

    International Nuclear Information System (INIS)

    C. Juan

    2004-01-01

    Development of the ground-water flow model for the Death Valley Regional Groundwater Flow System (DVRFS) required integration of numerous supporting hydrogeologic investigations. The results from recharge, discharge, hydraulic properties, water level, pumping, model boundaries, and geologic studies were integrated to develop the required conceptual and 3-D framework models, and the flow model itself. To support the complex modeling process and the needs of the multidisciplinary DVRFS team, a hardware and software system called GeoPro (Geoscience Knowledge Integration Protocol) was developed. A primary function of GeoPro is to manage the large volume of disparate data compiled for the 100,000-square-kilometer area of southern Nevada and California. The data are primarily from previous investigations and regional flow models developed for the Nevada Test Site and Yucca Mountain projects. GeoPro utilizes relational database technology (Microsoft SQL Server(trademark)) to store and manage these tabular point data, groundwater flow model ASCII data, 3-D hydrogeologic framework data, 2-D and 2.5-D GIS data, and text documents. Data management consists of versioning, tracking, and reporting data changes as multiple users access the centralized database. GeoPro also supports the modeling process by automating the routine data transformations required to integrate project software. This automation is also crucial to streamlining pre- and post-processing of model data during model calibration. Another function of GeoPro is to facilitate the dissemination and use of the model data and results through web-based documents by linking and allowing access to the underlying database and analysis tools. The intent is to convey to end-users the complex flow model product in a manner that is simple, flexible, and relevant to their needs. GeoPro is evolving from a prototype system to a production-level product. Currently the DVRFS pre- and post-processing modeling tools are being re

  6. Enabling kinetic micro-penetrator technology for Solar System research

    Science.gov (United States)

    Gowen, R. A.

    2008-09-01

    Whilst the concept of high speed impacting penetrator probes is not new, recent highly successful ground test results have considerably improved the perception that these can be a viable and useful addition to the current toolbox of planetary probes. Previous developments only led to a single deployment (Deep Space-2 to Mars on the ill fated NASA Mars Polar Lander mission in 1999) where neither the soft lander nor penetrator was ever heard from, which is not a logical basis for dismissing penetrator technology. Other space penetrator programmes have included the Russian Mars'96 ~80m/s penetrators for which the whole mission was lost before the spacecraft left Earth orbit, and the Japanese Lunar-A program which was cancelled after a lengthy development program which however saw multiple successful ground trials. The Japanese penetrators were designed for ~300m/s impact. The current UK penetrator developments are actively working towards full space qualification for a Lunar penetrators (MoonLITE mission), which would also provide a significant technical demonstration towards the development of smaller, shorter lived penetrators for exploring other solar system objects. We are advocating delivered micro-penetrators in the mass range ~4-10Kg, (preceded by ~13Kg Lunar penetrator MoonLITE development program), impacting at around 100-500m/s and carrying a scientific payload of around 2Kg. Additional mass is required to deliver the probes from `orbit' to surface which is dependent upon the particular planetary body in question. The mass per descent module therefore involves and additional element which, for a descent through an atmosphere could be quite modest, while for a flyby deployment, can be substantial. For Europa we estimate a descent module mass of ~13 Kg, while for Enceladus the value is ~40Kg for Enceladus since a deceleration of ~3.8 kms-1 is needed from a Titan orbit. The delivery system could consist of a rocket deceleration motor and attitude control system

  7. Dupont Analysis of An Information Technology Enabled Competitive Advantage

    OpenAIRE

    Nustini, Yuni

    2009-01-01

    The transformation of business caused by e-business and e-commerce applications of the internet and related technologies demonstrates that information systems and information technologies are essential ingredients for business survival and success. The most often cited benefit of IT are integrating business process, increasing efficiency, sales, productivity, and competitiveness. This study is designed for determining where managers considering investment in information technology (IT) projec...

  8. Dupont Analysis of an Information Technology Enabled Competitive Advantage

    OpenAIRE

    Nustini, Yuni

    2003-01-01

    The transformation of business caused by e-business and e-commerce applications of the internet and related technologies demonstrates that information systems and information technologies are essential ingredients for business survival and success. The most often cited benefit of IT are integrating business process, increasing efficiency, sales, productivity, and competitiveness. This study is designed for determining where managers considering investment in information technology (IT) projec...

  9. Factors Enabling the Use of Technology in Subject Teaching

    Science.gov (United States)

    Cubukcuoglu, Begum

    2013-01-01

    The importance of information and communication technologies in the teaching and learning process has been proven by many research studies to be an effective way of supporting teaching and learning. Although many teachers do not use new technologies as instructional tools, some are integrating information and communication technologies…

  10. Technology Mentors: Enablers of ICT Uptake in Australian Small Business

    Science.gov (United States)

    Woodley, Carolyn J.; Burgess, Stephen; Paguio, Rafael; Bingley, Scott

    2015-01-01

    Purpose: The purpose of this paper is to report on the innovative employment of students as technology mentors as part of a Blended Learning Program (BLP) that supported a group of owner-managers of small businesses to adopt appropriate information and communication technologies (ICT) to enhance their work practices. Design/methodology/approach:…

  11. Virtual Laboratory Enabling Collaborative Research in Applied Vehicle Technologies

    Science.gov (United States)

    Lamar, John E.; Cronin, Catherine K.; Scott, Laura E.

    2005-01-01

    The virtual laboratory is a new technology, based on the internet, that has had wide usage in a variety of technical fields because of its inherent ability to allow many users to participate simultaneously in instruction (education) or in the collaborative study of a common problem (real-world application). The leadership in the Applied Vehicle Technology panel has encouraged the utilization of this technology in its task groups for some time and its parent organization, the Research and Technology Agency, has done the same for its own administrative use. This paper outlines the application of the virtual laboratory to those fields important to applied vehicle technologies, gives the status of the effort, and identifies the benefit it can have on collaborative research. The latter is done, in part, through a specific example, i.e. the experience of one task group.

  12. NASA Program Office Technology Investments to Enable Future Missions

    Science.gov (United States)

    Thronson, Harley; Pham, Thai; Ganel, Opher

    2018-01-01

    The Cosmic Origins (COR) and Physics of the Cosmos (PCOS) Program Offices (POs) reside at NASA GSFC and implement priorities for the NASA HQ Astrophysics Division (APD). One major aspect of the POs’ activities is managing our Strategic Astrophysics Technology (SAT) program to mature technologies for future strategic missions. The Programs follow APD guidance on which missions are strategic, currently informed by the NRC’s 2010 Decadal Survey report, as well as APD’s Implementation Plan and the Astrophysics Roadmap.In preparation for the upcoming 2020 Decadal Survey, the APD has established Science and Technology Definition Teams (STDTs) to study four large-mission concepts: the Origins Space Telescope (née, Far-IR Surveyor), Habitable Exoplanet Imaging Mission, Large UV/Optical/IR Surveyor, and Lynx (née, X-ray Surveyor). The STDTs will develop the science case and design reference mission, assess technology development needs, and estimate the cost of their concept. A fifth team, the L3 Study Team (L3ST), was charged to study potential US contributions to ESA’s planned Laser Interferometer Space Antenna (LISA) gravitational-wave observatory.The POs use a rigorous and transparent process to solicit technology gaps from the scientific and technical communities, and prioritize those entries based on strategic alignment, expected impact, cross-cutting applicability, and urgency. For the past two years, the technology-gap assessments of the four STDTs and the L3ST are included in our process. Until a study team submits its final report, community-proposed changes to gaps submitted or adopted by a study team are forwarded to that study team for consideration.We discuss our technology development process, with strategic prioritization informing calls for SAT proposals and informing investment decisions. We also present results of the 2017 technology gap prioritization and showcase our current portfolio of technology development projects. To date, 96 COR and 86

  13. Operator overloading as an enabling technology for automatic differentiation

    International Nuclear Information System (INIS)

    Corliss, G.F.; Griewank, A.

    1993-01-01

    We present an example of the science that is enabled by object-oriented programming techniques. Scientific computation often needs derivatives for solving nonlinear systems such as those arising in many PDE algorithms, optimization, parameter identification, stiff ordinary differential equations, or sensitivity analysis. Automatic differentiation computes derivatives accurately and efficiently by applying the chain rule to each arithmetic operation or elementary function. Operator overloading enables the techniques of either the forward or the reverse mode of automatic differentiation to be applied to real-world scientific problems. We illustrate automatic differentiation with an example drawn from a model of unsaturated flow in a porous medium. The problem arises from planning for the long-term storage of radioactive waste

  14. Enabling Problem Based Learning through Web 2.0 Technologies

    DEFF Research Database (Denmark)

    Tambouris, Efthimios; Panopoulou, Eleni; Tarabanis, Konstantinos

    2012-01-01

    of modern educational systems. Established pedagogical strategies, such as Problem Based Learning (PBL), are being adapted for online use in conjunction with modern Web 2.0 technologies and tools. However, even though Web 2.0 and progressive social-networking technologies are automatically associated......Advances in Information and Communications Technology (ICT), particularly the so-called Web 2.0, are affecting all aspects of our life: how we communicate, how we shop, how we socialise, and how we learn. Facilitating learning through the use of ICT, also known as eLearning, is a vital part...... with ideals such as collaboration, sharing, and active learning, it is also possible to use them in a very conservative, teacher-centred way limiting thus their impact. In this paper, we present a PBL 2.0 framework, i.e., a framework combining PBL practices with Web 2.0 technologies. More specifically, we (a...

  15. Health-Enabled Smart Sensor Fusion Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — It has been proven that the combination of smart sensors with embedded metadata and wireless technologies present real opportunities for significant improvements in...

  16. Technologies to Enable EDL of Smallsat Science and Exploration Payloads

    Data.gov (United States)

    National Aeronautics and Space Administration — The central objective of this research is to develop technologies for Entry, Descent, and Landing (EDL) of cubesat-sized vehicles. While current efforts tend toward...

  17. Technologically Reflective Individuals as Enablers of Social Innovation*

    Science.gov (United States)

    Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

    2015-01-01

    This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco‐challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy‐to‐administer multi‐item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co‐creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process. PMID:27134342

  18. Technologically Reflective Individuals as Enablers of Social Innovation.

    Science.gov (United States)

    Schweitzer, Fiona; Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

    2015-11-01

    This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco-challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy-to-administer multi-item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co-creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process.

  19. Advanced Exploration Technologies: Micro and Nano Technologies Enabling Space Missions in the 21st Century

    Science.gov (United States)

    Krabach, Timothy

    1998-01-01

    Some of the many new and advanced exploration technologies which will enable space missions in the 21st century and specifically the Manned Mars Mission are explored in this presentation. Some of these are the system on a chip, the Computed-Tomography imaging Spectrometer, the digital camera on a chip, and other Micro Electro Mechanical Systems (MEMS) technology for space. Some of these MEMS are the silicon micromachined microgyroscope, a subliming solid micro-thruster, a micro-ion thruster, a silicon seismometer, a dewpoint microhygrometer, a micro laser doppler anemometer, and tunable diode laser (TDL) sensors. The advanced technology insertion is critical for NASA to decrease mass, volume, power and mission costs, and increase functionality, science potential and robustness.

  20. A Technology Plan for Enabling Commercial Space Business

    Science.gov (United States)

    Lyles, Garry M.

    1997-01-01

    The National Aeronautics and Space Administration's (NASA) Advanced Space Transportation Program is a customer driven, focused technology program that supports the NASA Strategic Plan and considers future commercial space business projections. The initial cycle of the Advanced Space Transportation Program implementation planning was conducted from December 1995 through February 1996 and represented increased NASA emphasis on broad base technology development with the goal of dramatic reductions in the cost of space transportation. The second planning cycle, conducted in January and February 1997, updated the program implementation plan based on changes in the external environment, increased maturity of advanced concept studies, and current technology assessments. The program has taken a business-like approach to technology development with a balanced portfolio of near, medium, and long-term strategic targets. Strategic targets are influenced by Earth science, space science, and exploration objectives as well as commercial space markets. Commercial space markets include those that would be enhanced by lower cost transportation as well as potential markets resulting in major increases in space business induced by reductions in transportation cost. The program plan addresses earth-to-orbit space launch, earth orbit operations and deep space systems. It also addresses all critical transportation system elements; including structures, thermal protection systems, propulsion, avionics, and operations. As these technologies are matured, integrated technology flight experiments such as the X-33 and X-34 flight demonstrator programs support near-term (one to five years) development or operational decisions. The Advanced Space Transportation Program and the flight demonstrator programs combine business planning, ground-based technology demonstrations and flight demonstrations that will permit industry and NASA to commit to revolutionary new space transportation systems

  1. Nordic Energy Technologies : Enabling a sustainable Nordic energy future

    Energy Technology Data Exchange (ETDEWEB)

    Vik, Amund; Smith, Benjamin

    2009-10-15

    A high current Nordic competence in energy technology and an increased need for funding and international cooperation in the field are the main messages of the report. This report summarizes results from 7 different research projects relating to policies for energy technology, funded by Nordic Energy Research for the period 2007-2008, and provides an analysis of the Nordic innovation systems in the energy sector. The Nordic countries possess a high level of competence in the field of renewable energy technologies. Of the total installed capacity comprises a large share of renewable energy, and Nordic technology companies play an important role in the international market. Especially distinguished wind energy, both in view of the installed power and a global technology sales. Public funding for energy research has experienced a significant decline since the oil crisis of the 1970s, although the figures in recent years has increased a bit. According to the IEA, it will require a significant increase in funding to reduce greenhouse gas emissions and limit further climate change. The third point highlighted in the report is the importance of international cooperation in energy research. Nordic and international cooperation is necessary in order to reduce duplication and create the synergy needed if we are to achieve our ambitious policy objectives in the climate and energy issue. (AG)

  2. Enabling Dedicated, Affordable Space Access Through Aggressive Technology Maturation

    Science.gov (United States)

    Jones, Jonathan E.; Kibbey, Timothy P.; Cobb, C. Brent; Harris, Lawanna L.

    2014-01-01

    A launch vehicle at the scale and price point which allows developers to take reasonable risks with high payoff propulsion and avionics hardware solutions does not exist today. Establishing this service provides a ride through the proverbial technology "valley of death" that lies between demonstration in laboratory and flight environments. NASA's NanoLaunch effort will provide the framework to mature both earth-to-orbit and on-orbit propulsion and avionics technologies while also providing affordable, dedicated access to low earth orbit for cubesat class payloads.

  3. Management as the enabling technology for space exploration

    Science.gov (United States)

    Mandell, Humboldt C., Jr.; Griffin, Michael D.

    1992-01-01

    This paper addresses the dilemma which NASA faces in starting a major new initiative within the constraints of the current national budget. It addressed the fact that unlike previous NASA programs, the major mission constraints come from management factors as opposed to technologies. An action plan is presented, along with some results from early management simplification processes.

  4. Photonics in switching: enabling technologies and subsystem design

    DEFF Research Database (Denmark)

    Vlachos, K.; Raffaelli, C.; Aleksic, S.

    2009-01-01

    This paper describes recent research activities and results in the area of photonic switching carried out within the framework of the EU-funded e-Photon/ONe + network of excellence, Virtual Department on Optical Switching. Technology aspects of photonics in switching and, in particular, recent...

  5. Elckerlyc goes mobile: enabling technology for ECAs in mobile applications

    NARCIS (Netherlands)

    Klaassen, Randy; Hendrix, J.; Reidsma, Dennis; op den Akker, Hendrikus J.A.

    2012-01-01

    The fast growth of computational resources and speech technology available on mobile devices makes it pos- sible for users of these devices to interact with service sys- tems through natural dialogue. These systems are sometimes perceived as social agents and presented by means of an animated

  6. Enabling instrumentation and technology for 21st century light sources

    Energy Technology Data Exchange (ETDEWEB)

    Byrd, J.M.; Shea, T.J.; Denes, P.; Siddons, P.; Attwood, D.; Kaertner, F.; Moog, L.; Li, Y.; Sakdinawat, A.; Schlueter, R.

    2010-06-01

    We present the summary from the Accelerator Instrumentation and Technology working group, one of the five working groups that participated in the BES-sponsored Workshop on Accelerator Physics of Future Light Sources held in Gaithersburg, MD September 15-17, 2009. We describe progress and potential in three areas: attosecond instrumentation, photon detectors for user experiments, and insertion devices.

  7. How Information Technology Can Enable 21st Century Schools

    Science.gov (United States)

    Kolderie, Ted; McDonald; Tim

    2009-01-01

    In recent years, the information technology (IT) revolution has transformed American industry--leading to new types of work processes and business organizations, and increased productivity and consumer innovations--but by and large, this game-changer has bypassed America's schools. Virtually all K-12 schools in the country are connected to the…

  8. Enabling Detailed Energy Analyses via the Technology Performance Exchange: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Studer, D.; Fleming, K.; Lee, E.; Livingood, W.

    2014-08-01

    One of the key tenets to increasing adoption of energy efficiency solutions in the built environment is improving confidence in energy performance. Current industry practices make extensive use of predictive modeling, often via the use of sophisticated hourly or sub-hourly energy simulation programs, to account for site-specific parameters (e.g., climate zone, hours of operation, and space type) and arrive at a performance estimate. While such methods are highly precise, they invariably provide less than ideal accuracy due to a lack of high-quality, foundational energy performance input data. The Technology Performance Exchange was constructed to allow the transparent sharing of foundational, product-specific energy performance data, and leverages significant, external engineering efforts and a modular architecture to efficiently identify and codify the minimum information necessary to accurately predict product energy performance. This strongly-typed database resource represents a novel solution to a difficult and established problem. One of the most exciting benefits is the way in which the Technology Performance Exchange's application programming interface has been leveraged to integrate contributed foundational data into the Building Component Library. Via a series of scripts, data is automatically translated and parsed into the Building Component Library in a format that is immediately usable to the energy modeling community. This paper (1) presents a high-level overview of the project drivers and the structure of the Technology Performance Exchange; (2) offers a detailed examination of how technologies are incorporated and translated into powerful energy modeling code snippets; and (3) examines several benefits of this robust workflow.

  9. Enabling science and technology for marine renewable energy

    International Nuclear Information System (INIS)

    Mueller, Markus; Wallace, Robin

    2008-01-01

    This paper describes some of the key challenges to be met in the development of marine renewable energy technology, from its present prototype form to being a widely deployed contributor to future energy supply. Since 2000, a number of large-scale wave and tidal current prototypes have been demonstrated around the world, but marine renewable energy technology is still 10-15 years behind that of wind energy. UK-based developers are leading the way, with Pelamis from Pelamis Wave Power demonstrated in the open sea, generating electricity into the UK network and securing orders from Portugal. However, having started later, the developing technology can make use of more advanced science and engineering, and it is therefore reasonable to expect rapid progress. Although progress is underway through deployment and testing, there are still key scientific challenges to be addressed in areas including resource assessment and predictability, engineering design and manufacturability, installation, operation and maintenance, survivability, reliability and cost reduction. The research priorities required to meet these challenges are suggested in this paper and have been drawn from current roadmaps and vision documents, including more recent consultations within the community by the UK Energy Research Centre Marine Research Network. Many scientific advances are required to meet these challenges, and their likelihood is explored based on current and future capabilities

  10. Miniaturized Power Processing Unit Study: A Cubesat Electric Propulsion Technology Enabler Project

    Science.gov (United States)

    Ghassemieh, Shakib M.

    2014-01-01

    This study evaluates High Voltage Power Processing Unit (PPU) technology and driving requirements necessary to enable the Microfluidic Electric Propulsion technology research and development by NASA and university partners. This study provides an overview of the state of the art PPU technology with recommendations for technology demonstration projects and missions for NASA to pursue.

  11. Maglev trains key underlying technologies

    CERN Document Server

    Liu, Zhigang; Li, Xiaolong

    2015-01-01

    The motion of the train depends on the traction of linear motors in the vehicle. This book describes a number of essential technologies that can ensure the safe operation of Maglev trains, such as suspension and orientation technologies, network control and diagnosis technologies. This book is intended for researchers, scientists, engineers and graduate students involved in the rail transit industry, train control and diagnosis, and Maglev technology.

  12. Enabling Telescopes of the Future: Long-Range Technology Investing

    Science.gov (United States)

    Thronson, Harley

    2004-01-01

    The Office of Space Science at NASA Headquarters has a current staff of about 60 professionals (aka, scientists, engineers, budget analysts) and an annual budget of $2.5 B out of NASA s $15.0 B. About 35 missions or programs in various stages of development or operation are managed by OSS, notable among them are Hubble Space Telescope, Mars Global Surveyor, Mars 2001 Odyssey, Chandra X-ray Observatory, TRACE (solar observatory), Cassini (mission to Saturn), Galileo (mission at Jupiter), and Next Generation Space Telescope. OSS has an annual technology budget of several hundred million dollars. So, what is it that we are doing?

  13. Synthetic Biology as an Enabling Technology for Space Exploration

    Science.gov (United States)

    Rothschild, Lynn J.

    2016-01-01

    Human exploration off planet is severely limited by the cost of launching materials into space and by re-supply. Thus materials brought from Earth must be light, stable and reliable at destination. Using traditional approaches, a lunar or Mars base would require either transporting a hefty store of metals or heavy manufacturing equipment and construction materials for in situ extraction; both would severely limit any other mission objectives. Long-term human space presence requires periodic replenishment, adding a massive cost overhead. Even robotic missions often sacrifice science goals for heavy radiation and thermal protection. Biology has the potential to solve these problems because life can replicate and repair itself, and perform a wide variety of chemical reactions including making food, fuel and materials. Synthetic biology enhances and expands life's evolved repertoire. Using organisms as feedstock, additive manufacturing through bioprinting will make possible the dream of producing bespoke tools, food, smart fabrics and even replacement organs on demand. This new approach and the resulting novel products will enable human exploration and settlement on Mars, while providing new manufacturing approaches for life on Earth.

  14. Enabling Research Network Connectivity to Clouds with Virtual Router Technology

    Science.gov (United States)

    Seuster, R.; Casteels, K.; Leavett-Brown, CR; Paterson, M.; Sobie, RJ

    2017-10-01

    The use of opportunistic cloud resources by HEP experiments has significantly increased over the past few years. Clouds that are owned or managed by the HEP community are connected to the LHCONE network or the research network with global access to HEP computing resources. Private clouds, such as those supported by non-HEP research funds are generally connected to the international research network; however, commercial clouds are either not connected to the research network or only connect to research sites within their national boundaries. Since research network connectivity is a requirement for HEP applications, we need to find a solution that provides a high-speed connection. We are studying a solution with a virtual router that will address the use case when a commercial cloud has research network connectivity in a limited region. In this situation, we host a virtual router in our HEP site and require that all traffic from the commercial site transit through the virtual router. Although this may increase the network path and also the load on the HEP site, it is a workable solution that would enable the use of the remote cloud for low I/O applications. We are exploring some simple open-source solutions. In this paper, we present the results of our studies and how it will benefit our use of private and public clouds for HEP computing.

  15. Can wireless technology enable new diabetes management tools?

    Science.gov (United States)

    Hedtke, Paul A

    2008-01-01

    Mobile computing and communications technology embodied in the modern cell phone device can be employed to improve the lives of diabetes patients by giving them better tools for self-management. Several companies are working on the development of diabetes management tools that leverage the ubiquitous cell phone to bring self-management tools to the hand of the diabetes patient. Integration of blood glucose monitoring (BGM) technology with the cell phone platform adds a level of convenience for the person with diabetes, but, more importantly, allows BGM data to be automatically captured, logged, and processed in near real time in order to provide the diabetes patient with assistance in managing their blood glucose levels. Other automatic measurements can estimate physical activity, and information regarding medication events and food intake can be captured and analyzed in order to provide the diabetes patient with continual assistance in managing their therapy and behaviors in order to improve glycemic control. The path to realization of such solutions is not, however, without obstacles.

  16. The development of enabling technologies for producing active interrogation beams.

    Science.gov (United States)

    Kwan, Thomas J T; Morgado, Richard E; Wang, Tai-Sen F; Vodolaga, B; Terekhin, V; Onischenko, L M; Vorozhtsov, S B; Samsonov, E V; Vorozhtsov, A S; Alenitsky, Yu G; Perpelkin, E E; Glazov, A A; Novikov, D L; Parkhomchuk, V; Reva, V; Vostrikov, V; Mashinin, V A; Fedotov, S N; Minayev, S A

    2010-10-01

    A U.S./Russian collaboration of accelerator scientists was directed to the development of high averaged-current (∼1 mA) and high-quality (emittance ∼15 πmm mrad; energy spread ∼0.1%) 1.75 MeV proton beams to produce active interrogation beams that could be applied to counterterrorism. Several accelerator technologies were investigated. These included an electrostatic tandem accelerator of novel design, a compact cyclotron, and a storage ring with energy compensation and electron cooling. Production targets capable of withstanding the beam power levels were designed, fabricated, and tested. The cyclotron/storage-ring system was theoretically studied and computationally designed, and the electrostatic vacuum tandem accelerator at BINP was demonstrated for its potential in active interrogation of explosives and special nuclear materials.

  17. Stratified charge rotary aircraft engine technology enablement program

    Science.gov (United States)

    Badgley, P. R.; Irion, C. E.; Myers, D. M.

    1985-01-01

    The multifuel stratified charge rotary engine is discussed. A single rotor, 0.7L/40 cu in displacement, research rig engine was tested. The research rig engine was designed for operation at high speeds and pressures, combustion chamber peak pressure providing margin for speed and load excursions above the design requirement for a high is advanced aircraft engine. It is indicated that the single rotor research rig engine is capable of meeting the established design requirements of 120 kW, 8,000 RPM, 1,379 KPA BMEP. The research rig engine, when fully developed, will be a valuable tool for investigating, advanced and highly advanced technology components, and provide an understanding of the stratified charge rotary engine combustion process.

  18. Enabling Dissimilar Material Joining Using Friction Stir Scribe Technology

    Energy Technology Data Exchange (ETDEWEB)

    Hovanski, Yuri; Upadyay, Piyush; Kleinbaum, Sarah; Carlson, Blair; Boettcher, Eric; Ruokolainen, Robert

    2017-04-05

    One challenge in adapting welding processes to dissimilar material joining is the diversity of melting temperatures of the different materials. Although the use of mechanical fasteners and adhesives have mostly paved the way for near-term implementation of dissimilar material systems, these processes only accentuate the need for low-cost welding processes capable of joining dissimilar material components regardless of alloy, properties, or melting temperature. Friction stir scribe technology was developed to overcome the challenges of joining dissimilar material components where melting temperatures vary greatly, and properties and/or chemistry are not compatible with more traditional welding processes. Although the friction stir scribe process is capable of joining dissimilar metals and metal/polymer systems, a more detailed evaluation of several aluminum/steel joints is presented herein to demonstrate the ability to both chemically and mechanically join dissimilar materials.

  19. Recce and UAV: mass memory an enabling technology for merger

    Science.gov (United States)

    Hall, Walter J., Jr.

    1996-11-01

    In the era of Declining Defense Dollars, the cost of sophisticated aircraft and highly trained personnel has heightened interest in Unmanned Air Vehicles (UAVs). The obvious lure is the lower vehicle cost (no crew station and crew support systems) and reduced needs for highly skilled air crews. Reconnaissance (commonly called recce) aircraft and their missions are among the commonly sighted applications for UAVs. Today's UAV recce aircraft (such as the Predator) are the genesis of much more sophisticated UAVs of the future. The evolution of the UAV will not be constrained to recce aircraft, but the recce mission will be significant for UAVs. The recce hole has historically been that of a battlefield data collector for post mission review and planning. In the electronic battlefield of the future, that role will be expanded. Envisioned mission for future recce aircraft include real-time scout, target location and fire coordination, battle damage assessment, and large area surveillance. Associated with many of these new roles is the need to store or assess much higher volumes of data. The higher volume data requirements are the result of higher resolution sensors (the Advanced Helicopter Pilotage infrared sensor has a data rate of near 1.2 Gigabits per second) and multi-sensor applications (the Multi-Sensor Aided Targeting program considered infrared, TV, and radar). The evolution of the UAV recce role, and associated increased data storage needs (from higher data rates and increased coverage requirements), requires the development of new data storage equipment. One solution to the increased storage needs is solid-state memory. As solid-state memories become faster, smaller, and cheaper they will enable the UAV recce mission capability to expand. Because of the speed of the memory, it will be possible to buffer and assess (identify the existence of targets or other points of interest) data before committing to consumption of limited storage assets. Faster memory

  20. Aerobraking at Venus: A science and technology enabler

    Science.gov (United States)

    Hibbard, Kenneth; Glaze, Lori; Prince, Jill

    2012-04-01

    activities to onboard the spacecraft. A defined aerobraking temperature corridor, based on spacecraft component maximum temperatures, can be employed on a spacecraft specifically designed for aerobraking, and will predict subsequent aerobraking orbits and prescribe apoapsis propulsive maneuvers to maintain the spacecraft within its specified temperature limits. A spacecraft specifically designed for aerobraking in the Venus environment can provide a cost-effective platform for achieving these expanded science and technology goals.This paper discusses the scientific merits of a low-altitude, near-circular orbit at Venus, highlights the differences in aerobraking at Venus versus Mars, and presents design data using a flight system specifically designed for an aerobraking mission at Venus. Using aerobraking to achieve a low altitude orbit at Venus may pave the way for various technology demonstrations, such as autonomous aerobraking techniques and/or new science measurements like a multi-mode, synthetic aperture radar capable of altimetry and radiometry with performance that is significantly more capable than Magellan.

  1. Enabling medication management through health information technology (Health IT).

    Science.gov (United States)

    McKibbon, K Ann; Lokker, Cynthia; Handler, Steve M; Dolovich, Lisa R; Holbrook, Anne M; O'Reilly, Daria; Tamblyn, Robyn; J Hemens, Brian; Basu, Runki; Troyan, Sue; Roshanov, Pavel S; Archer, Norman P; Raina, Parminder

    2011-04-01

    The objective of the report was to review the evidence on the impact of health information technology (IT) on all phases of the medication management process (prescribing and ordering, order communication, dispensing, administration and monitoring as well as education and reconciliation), to identify the gaps in the literature and to make recommendations for future research. We searched peer-reviewed electronic databases, grey literature, and performed hand searches. Databases searched included MEDLINE®, Embase, CINAHL (Cumulated Index to Nursing and Allied Health Literature), Cochrane Database of Systematic Reviews, International Pharmaceutical Abstracts, Compendex, Inspec (which includes IEEE Xplore), Library and Information Science Abstracts, E-Prints in Library and Information Science, PsycINFO, Sociological Abstracts, and Business Source Complete. Grey literature searching involved Internet searching, reviewing relevant Web sites, and searching electronic databases of grey literatures. AHRQ also provided all references in their e-Prescribing, bar coding, and CPOE knowledge libraries. Paired reviewers looked at citations to identify studies on a range of health IT used to assist in the medication management process (MMIT) during multiple levels of screening (titles and abstracts, full text and final review for assignment of questions and data abstrction). Randomized controlled trials and cohort, case-control, and case series studies were independently assessed for quality. All data were abstracted by one reviewer and examined by one of two different reviewers with content and methods expertise. 40,582 articles were retrieved. After duplicates were removed, 32,785 articles were screened at the title and abstract phase. 4,578 full text articles were assessed and 789 articles were included in the final report. Of these, 361 met only content criteria and were listed without further abstraction. The final report included data from 428 articles across the seven key

  2. Novel enabling technologies of gene isolation and plant transformation for improved crop protection

    Energy Technology Data Exchange (ETDEWEB)

    Torok, Tamas

    2013-02-04

    Meeting the needs of agricultural producers requires the continued development of improved transgenic crop protection products. The completed project focused on developing novel enabling technologies of gene discovery and plant transformation to facilitate the generation of such products.

  3. Reconfigurable Computing As an Enabling Technology for Single-Photon-Counting Laser Altimetry

    Science.gov (United States)

    Powell, Wesley; Hicks, Edward; Pinchinat, Maxime; Dabney, Philip; McGarry, Jan; Murray, Paul

    2003-01-01

    Single-photon-counting laser altimetry is a new measurement technique offering significant advantages in vertical resolution, reducing instrument size, mass, and power, and reducing laser complexity as compared to analog or threshold detection laser altimetry techniques. However, these improvements come at the cost of a dramatically increased requirement for onboard real-time data processing. Reconfigurable computing has been shown to offer considerable performance advantages in performing this processing. These advantages have been demonstrated on the Multi-KiloHertz Micro-Laser Altimeter (MMLA), an aircraft based single-photon-counting laser altimeter developed by NASA Goddard Space Flight Center with several potential spaceflight applications. This paper describes how reconfigurable computing technology was employed to perform MMLA data processing in real-time under realistic operating constraints, along with the results observed. This paper also expands on these prior results to identify concepts for using reconfigurable computing to enable spaceflight single-photon-counting laser altimeter instruments.

  4. SLAE–CPS: Smart Lean Automation Engine Enabled by Cyber-Physical Systems Technologies

    Science.gov (United States)

    Ma, Jing; Wang, Qiang; Zhao, Zhibiao

    2017-01-01

    In the context of Industry 4.0, the demand for the mass production of highly customized products will lead to complex products and an increasing demand for production system flexibility. Simply implementing lean production-based human-centered production or high automation to improve system flexibility is insufficient. Currently, lean automation (Jidoka) that utilizes cyber-physical systems (CPS) is considered a cost-efficient and effective approach for improving system flexibility under shrinking global economic conditions. Therefore, a smart lean automation engine enabled by CPS technologies (SLAE–CPS), which is based on an analysis of Jidoka functions and the smart capacity of CPS technologies, is proposed in this study to provide an integrated and standardized approach to design and implement a CPS-based smart Jidoka system. A set of comprehensive architecture and standardized key technologies should be presented to achieve the above-mentioned goal. Therefore, a distributed architecture that joins service-oriented architecture, agent, function block (FB), cloud, and Internet of things is proposed to support the flexible configuration, deployment, and performance of SLAE–CPS. Then, several standardized key techniques are proposed under this architecture. The first one is for converting heterogeneous physical data into uniform services for subsequent abnormality analysis and detection. The second one is a set of Jidoka scene rules, which is abstracted based on the analysis of the operator, machine, material, quality, and other factors in different time dimensions. These Jidoka rules can support executive FBs in performing different Jidoka functions. Finally, supported by the integrated and standardized approach of our proposed engine, a case study is conducted to verify the current research results. The proposed SLAE–CPS can serve as an important reference value for combining the benefits of innovative technology and proper methodology. PMID:28657577

  5. SLAE-CPS: Smart Lean Automation Engine Enabled by Cyber-Physical Systems Technologies.

    Science.gov (United States)

    Ma, Jing; Wang, Qiang; Zhao, Zhibiao

    2017-06-28

    In the context of Industry 4.0, the demand for the mass production of highly customized products will lead to complex products and an increasing demand for production system flexibility. Simply implementing lean production-based human-centered production or high automation to improve system flexibility is insufficient. Currently, lean automation (Jidoka) that utilizes cyber-physical systems (CPS) is considered a cost-efficient and effective approach for improving system flexibility under shrinking global economic conditions. Therefore, a smart lean automation engine enabled by CPS technologies (SLAE-CPS), which is based on an analysis of Jidoka functions and the smart capacity of CPS technologies, is proposed in this study to provide an integrated and standardized approach to design and implement a CPS-based smart Jidoka system. A set of comprehensive architecture and standardized key technologies should be presented to achieve the above-mentioned goal. Therefore, a distributed architecture that joins service-oriented architecture, agent, function block (FB), cloud, and Internet of things is proposed to support the flexible configuration, deployment, and performance of SLAE-CPS. Then, several standardized key techniques are proposed under this architecture. The first one is for converting heterogeneous physical data into uniform services for subsequent abnormality analysis and detection. The second one is a set of Jidoka scene rules, which is abstracted based on the analysis of the operator, machine, material, quality, and other factors in different time dimensions. These Jidoka rules can support executive FBs in performing different Jidoka functions. Finally, supported by the integrated and standardized approach of our proposed engine, a case study is conducted to verify the current research results. The proposed SLAE-CPS can serve as an important reference value for combining the benefits of innovative technology and proper methodology.

  6. Enabling Communication and Navigation Technologies for Future Near Earth Science Missions

    Science.gov (United States)

    Israel, David J.; Heckler, Gregory; Menrad, Robert; Hudiburg, John; Boroson, Don; Robinson, Bryan; Cornwell, Donald

    2016-01-01

    In 2015, the Earth Regimes Network Evolution Study (ERNESt) proposed an architectural concept and technologies that evolve to enable space science and exploration missions out to the 2040 timeframe. The architectural concept evolves the current instantiations of the Near Earth Network and Space Network with new technologies to provide a global communication and navigation network that provides communication and navigation services to a wide range of space users in the near Earth domain. The technologies included High Rate Optical Communications, Optical Multiple Access (OMA), Delay Tolerant Networking (DTN), User Initiated Services (UIS), and advanced Position, Navigation, and Timing technology. This paper describes the key technologies and their current technology readiness levels. Examples of science missions that could be enabled by the technologies and the projected operational benefits of the architecture concept to missions are also described.

  7. A Classification Framework for Exploring Technology-Enabled Practice--Frame TEP

    Science.gov (United States)

    Prestridge, Sarah; de Aldama, Carlos

    2016-01-01

    This article theorizes the construction of a classification framework to explore teachers' beliefs and pedagogical practices for the use of digital technologies in the classroom. There are currently many individual schemas and models that represent both developmental and divergent concepts associated with technology-enabled practice. This article…

  8. Enabling Laser and Lidar Technologies for NASA's Science and Exploration Mission's Applications

    Science.gov (United States)

    Singh, Upendra N.; Kavaya, Michael J.

    2005-01-01

    NASA s Laser Risk Reduction Program, begun in 2002, has achieved many technology advances in only 3.5 years. The recent selection of several lidar proposals for Science and Exploration applications indicates that the LRRP goal of enabling future space-based missions by lowering the technology risk has already begun to be met.

  9. VACET: Proposed SciDAC2 Visualization and Analytics Center for Enabling Technologies

    International Nuclear Information System (INIS)

    Bethel, W; Johnson, C; Hansen, C; Parker, S; Sanderson, A; Silva, C; Tricoche, X; Pascucci, V; Childs, H; Cohen, J; Duchaineau, M; Laney, D; Lindstrom, P; Ahern, S; Meredith, J; Ostrouchov, G; Joy, K; Hamann, B

    2006-01-01

    This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang',' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies

  10. The role of electricity storage and hydrogen technologies in enabling global low-carbon energy transitions

    OpenAIRE

    McPherson, M.; Johnson, N.; Strubegger, M.

    2018-01-01

    Previous studies have noted the importance of electricity storage and hydrogen technologies for enabling large-scale variable renewable energy (VRE) deployment in long-term climate change mitigation scenarios. However, global studies, which typically use integrated assessment models, assume a fixed cost trajectory for storage and hydrogen technologies; thereby ignoring the sensitivity of VRE deployment and/or mitigation costs to uncertainties in future storage and hydrogen technology costs. Y...

  11. A conceptual framework for technology-enabled and technology-dependent user behavior toward device mesh and mesh app

    Directory of Open Access Journals (Sweden)

    Ming-Hsiung Hsiao

    2018-06-01

    Full Text Available The device mesh and mesh app revealed by Gartner as the future strategic technology trend are able to predict people's need from their historic data, then provides the needed services or service innovation to support their activity engagement. However, many theories have identified that it is the motivation, rather than technology, that drives people to engage in activities or tasks. For this reason, this study builds a conceptual framework by integrating the extant logic and theories to explore how future technology would generate benefits for people. It integrates task-technology fit (TTF model and motivation theory (mainly expectancy-value theory to explain such technology user behavior. It also points out the difference between technology-enabled and technology-dependent user behavior and concludes that too much emphasis on the role of technology with too little attention on motivation would distort technology user behavior, and the role of technology as well. Keywords: Device mesh, Mesh app, Expectancy-value theory, Task-technology fit (TTF, Technology-enabled user, Technology-dependent user

  12. BARRIERS AND MOTIVATORS IN ENGAGING WITH TECHNOLOGY-ENABLED CARDIAC REHABILITATION: A PATIENT AND HEALTH PROFESSIONAL PERSPECTIVE.

    Directory of Open Access Journals (Sweden)

    Deirdre Walsh

    2015-10-01

    This formative work has outlined key patient and stakeholder concerns regarding engagement with a technology enabled behavior change intervention in CR. Factors that inhibit and promote engagement have been explored using the COM-B framework. Motivational factors related to social interaction were deemed one of the integral aspects for engagement and adherence to PATHway. In terms of capability factors, technology ease- of-use was highlighted among patient and stakeholders as important for uptake and continued use. This project has received funding from the European Union’s Horizon 2020 Framework Programme for Research and Innovation Action under Grant Agreement no. 643491. PATHway: Technology enabled behavioural change as a pathway towards better self-management of CVD (www.pathway2health.eu

  13. Exploring How Usage-Focused Business Models Enable Circular Economy through Digital Technologies

    Directory of Open Access Journals (Sweden)

    Gianmarco Bressanelli

    2018-02-01

    Full Text Available Recent studies advocate that digital technologies are key enabling factors for the introduction of servitized business models. At the same time, these technologies support the implementation of the circular economy (CE paradigm into businesses. Despite this general agreement, the literature still overlooks how digital technologies enable such a CE transition. To fill the gap, this paper develops a conceptual framework, based on the literature and a case study of a company implementing a usage-focused servitized business model in the household appliance industry. This study focuses on the Internet of Things (IoT, Big Data, and analytics, and identifies eight specific functionalities enabled by such technologies (improving product design, attracting target customers, monitoring and tracking product activity, providing technical support, providing preventive and predictive maintenance, optimizing the product usage, upgrading the product, enhancing renovation and end-of-life activities. By investigating how these functionalities affect three CE value drivers (increasing resource efficiency, extending lifespan, and closing the loop, the conceptual framework developed in this paper advances knowledge about the role of digital technologies as an enabler of the CE within usage-focused business models. Finally, this study shows how digital technologies help overcome the drawback of usage-focused business models for the adoption of CE pointed out by previous literature.

  14. Enabling Technologies for Ultra-Safe and Secure Modular Nuclear Energy

    Energy Technology Data Exchange (ETDEWEB)

    Mendez Cruz, Carmen Margarita [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rochau, Gary E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Middleton, Bobby [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodriguez, Salvador B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodriguez, Carmelo [General Atomics, San Diego, CA (United States); Schleicher, Robert [General Atomics, San Diego, CA (United States)

    2016-06-01

    Sandia National Laboratories and General Atomics are pleased to respond to the Advanced Research Projects Agency-Energy (ARPA-e)’s request for information on innovative developments that may overcome various current reactor-technology limitations. The RFI is particularly interested in innovations that enable ultra-safe and secure modular nuclear energy systems. Our response addresses the specific features for reactor designs called out in the RFI, including a brief assessment of the current state of the technologies that would enable each feature and the methods by which they could be best incorporated into a reactor design.

  15. Enabling Technologies for Ultra-Safe and Secure Modular Nuclear Energy

    International Nuclear Information System (INIS)

    Mendez Cruz, Carmen Margarita; Rochau, Gary E.; Middleton, Bobby; Rodriguez, Salvador B.; Rodriguez, Carmelo; Schleicher, Robert

    2016-01-01

    Sandia National Laboratories and General Atomics are pleased to respond to the Advanced Research Projects Agency-Energy (ARPA-e)'s request for information on innovative developments that may overcome various current reactor-technology limitations. The RFI is particularly interested in innovations that enable ultra-safe and secure modular nuclear energy systems. Our response addresses the specific features for reactor designs called out in the RFI, including a brief assessment of the current state of the technologies that would enable each feature and the methods by which they could be best incorporated into a reactor design.

  16. Heat Treatment Used to Strengthen Enabling Coating Technology for Oil-Free Turbomachinery

    Science.gov (United States)

    Edmonds, Brian J.; DellaCorte, Christopher

    2002-01-01

    The PS304 high-temperature solid lubricant coating is a key enabling technology for Oil- Free turbomachinery propulsion and power systems. Breakthroughs in the performance of advanced foil air bearings and improvements in computer-based finite element modeling techniques are the key technologies enabling the development of Oil-Free aircraft engines being pursued by the Oil-Free Turbomachinery team at the NASA Glenn Research Center. PS304 is a plasma spray coating applied to the surface of shafts operating against foil air bearings or in any other component requiring solid lubrication at high temperatures, where conventional materials such as graphite cannot function.

  17. Electric Energy Management in the Smart Home: Perspectives on Enabling Technologies and Consumer Behavior

    Energy Technology Data Exchange (ETDEWEB)

    Zipperer, A. [Colorado State Univ., Fort Collins, CO (United States); Aloise-Young, P. A. [Colorado State Univ., Fort Collins, CO (United States); Suryanarayanan, S. [Colorado State Univ., Fort Collins, CO (United States); Zimmerle, D. [Colorado State Univ., Fort Collins, CO (United States); Roche, R. [Univ. of Technology, Belfort-Montebeliard (France); Earle, L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Christensen, D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bauleo, P. [Fort Collins Utilities, CO (United States)

    2013-08-01

    Smart homes hold the potential for increasing energy efficiency, decreasing costs of energy use, decreasing the carbon footprint by including renewable resources, and trans-forming the role of the occupant. At the crux of the smart home is an efficient electric energy management system that is enabled by emerging technologies in the electricity grid and consumer electronics. This article presents a discussion of the state-of-the-art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

  18. Electric Energy Management in the Smart Home: Perspectives on Enabling Technologies and Consumer Behavior

    Energy Technology Data Exchange (ETDEWEB)

    Zipperer, Adam; Aloise-Young, Patricia A.; Suryanarayanan, Siddharth; Roche, Robin; Earle, Lieko; Christensen, Dane; Bauleo, Pablo; Zimmerle, Daniel

    2013-11-01

    Smart homes hold the potential for increasing energy efficiency, decreasing costs of energy use, decreasing the carbon footprint by including renewable resources, and transforming the role of the occupant. At the crux of the smart home is an efficient electric energy management system that is enabled by emerging technologies in the electric grid and consumer electronics. This article presents a discussion of the state-of-the-art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

  19. The effect of technology-enabled active learning on undergraduate students understanding of electromagnetism

    International Nuclear Information System (INIS)

    Dori, Y.J.

    2005-01-01

    Full Text:The Technology-Enabled Active Learning Project at the Massachusetts Institute of Technology (MIT) involves media-rich software for simulation and visualization in freshman physics carried out in a specially redesigned classroom to facilitate group interaction. These technology-based learning materials are especially useful in electromagnetism to help students conceptualize phenomena and processes. This study analyzes the effects of the unique learning environment of the Technology-Enabled Active Learning Project project on students cognitive and affective outcomes. The assessment of the project included examining students conceptual understanding before and after studying electromagnetism in a media-rich environment. We also investigated the effect of this environment on students preferences regarding the various teaching methods. As part of the project, we developed pre- and post-tests consisting of conceptual questions from standardized tests, as well as questions designed to assess the effect of visualizations and experiments. The research population consisted of 811 undergraduate students. It consisted of a small- and a large-scale experimental groups and a control group. Technology-Enabled Active Learning Project students improved their conceptual understanding concepts of the subject matter to a significantly higher extent than their control group peers. A majority of the students in the small-scale experiment noted that they would recommend the Technology-Enabled Active Learning Project course to fellow students, indicating the benefits of inter activity, visualization, and hands-on experiments, which the technology helped enable. In the large-scale implementation students expressed both positive and negative attitudes in the course survey

  20. Future research in technological enablers for knowledge management: A worldwide expert study

    DEFF Research Database (Denmark)

    Sarka, Peter; Caldwell, Nicholas H. M.; Ipsen, Christine

    2014-01-01

    Information Technology (IT) is widely considered as an important part of knowledge management (KM). However, failures of KM in organisational practice have been attributed to an overemphasis of IT in KM. An improved understanding of the role of IT within KM in organisations could help to improve...... key research themes articulated by the KM experts to enhance and develop KM in relation to technological enablers....

  1. Cohesive subgroup formation : enabling and constraining effects of social capital in strategic technology alliance networks

    NARCIS (Netherlands)

    Duysters, G.M.; Lemmens, C.E.A.V.

    2002-01-01

    In this paper we will examine the role of embeddedness and social capital in the process of cohesive subgroup formation in strategic technology alliance networks. More in particular, we will investigate the social mechanisms that enable and enforce cohesive subgroup formation. We will argue that the

  2. Organic electronics: materials, technology and circuit design developments enabling new applications

    NARCIS (Netherlands)

    Leeuw, de D.M.; Cantatore, E.

    2009-01-01

    Organic electronics is growing to become an important new field in the global electronics market. RFID labels, flexible displays, solar cells, OLED-based lighting and displays are only some of the innovative products enabled by technologies based on organic semiconductors. Starting from a short

  3. Nuclear Energy Enabling Technologies (NEET) Reactor Materials: News for the Reactor Materials Crosscut, May 2016

    Energy Technology Data Exchange (ETDEWEB)

    Maloy, Stuart Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science in Radiation and Dynamics Extremes

    2016-09-26

    In this newsletter for Nuclear Energy Enabling Technologies (NEET) Reactor Materials, pages 1-3 cover highlights from the DOE-NE (Nuclear Energy) programs, pages 4-6 cover determining the stress-strain response of ion-irradiated metallic materials via spherical nanoindentation, and pages 7-8 cover theoretical approaches to understanding long-term materials behavior in light water reactors.

  4. Consumer Connectivity in a Complex, Technology-enabled, and Mobile-oriented World with Smart Products

    NARCIS (Netherlands)

    Verhoef, Peter C.; Stephen, Andrew T.; Kannan, P. K.; Luo, Xueming; Abhishek, Vibhanshu; Andrews, Michelle; Bart, Yakov; Datta, Hannes; Fong, Nathan; Hoffman, Donna L.; Hu, Mandy Mantian; Novak, Tom; Rand, William; Zhang, Yuchi

    2017-01-01

    Today's consumers are immersed in a vast and complex array of networks. Each network features an interconnected mesh of people and firms, and now, with the rise of the Internet of Things (IoT), also objects. Technology (particularly mobile devices) enables such connections, and facilitates many

  5. Consumer connectivity in a complex, technology-enabled, and mobile-oriented world with smart products

    NARCIS (Netherlands)

    Verhoef, Peter C.; Stephen, Andrew T.; Kannan, P.K.; Luo, Xueming; Abishek, Vibhanshu; Andrews, Michelle; Bart, Yakov; Datta, Hannes; Fong, Nathan M.; Hoffman, Donna L.; Hu, Mandy; Novak, Thomas P.; Rand, William; Zhang, Yuchi

    2017-01-01

    Today’s consumers are immersed in a vast and complex array of networks. Each network features an interconnected mesh of people and firms, and now, with the rise of the Internet of Things (IoT), also objects. Technology (particularly mobile devices) enables such connections, and facilitates many

  6. Supporting Pre-Service Teachers' Technology-Enabled Learning Design Thinking through Whole of Programme Transformation

    Science.gov (United States)

    Bower, Matt; Highfield, Kate; Furney, Pam; Mowbray, Lee

    2013-01-01

    This paper explains a development and evaluation project aimed at transforming two pre-service teacher education programmes at Macquarie University to more effectively cultivate students' technology-enabled learning design thinking. The process of transformation was based upon an explicit and sustained focus on developing university academics'…

  7. Integrating Technology into Instruction at a Public University in Kyrgyzstan: Barriers and Enablers

    Science.gov (United States)

    Muhametjanova, Gulshat; Cagiltay, Kursat

    2016-01-01

    The purpose of this study was to determine enablers and barriers to the technology integration into education based on the example of the situation at the Kyrgyz-Turkish Manas University as reported by students and instructors. The study employed the mixed-methods research design, combining data obtained from 477 student and 57 instructor…

  8. Pharmacy on demand: New technologies to enable miniaturized and mobile drug manufacturing.

    Science.gov (United States)

    Lewin, John J; Choi, Eugene J; Ling, Geoffrey

    2016-01-15

    Developmental pharmaceutical manufacturing systems and techniques designed to overcome the shortcomings of traditional batch processing methods are described. Conventional pharmaceutical manufacturing processes do not adequately address the needs of military and civilian patient populations and healthcare providers. Recent advances within the Defense Advanced Research Projects Agency (DARPA) Battlefield Medicine program suggest that miniaturized, flexible platforms for end-to-end manufacturing of pharmaceuticals are possible. Advances in continuous-flow synthesis, chemistry, biological engineering, and downstream processing, coupled with online analytics, automation, and enhanced process control measures, pave the way for disruptive innovation to improve the pharmaceutical supply chain and drug manufacturing base. These new technologies, along with current and ongoing advances in regulatory science, have the future potential to (1) permit "on demand" drug manufacturing on the battlefield and in other austere environments, (2) enhance the level of preparedness for chemical, biological, radiological, and nuclear threats, (3) enhance health authorities' ability to respond to natural disasters and other catastrophic events, (4) minimize shortages of drugs, (5) address gaps in the orphan drug market, (6) support and enable the continued drive toward precision medicine, and (7) enhance access to needed medications in underserved areas across the globe. Modular platforms under development by DARPA's Battlefield Medicine program may one day improve the safety, efficiency, and timeliness of drug manufacturing. Copyright © 2016 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  9. The role of utilities in enabling technology innovation: The BC hydro alternative & emerging energy strategy

    Energy Technology Data Exchange (ETDEWEB)

    Tu, Alex; Leclair, Donna; Morrison, Allison

    2010-09-15

    In order for renewable energy to play a dominant role in the global electricity supply mix, emerging renewable energy technologies - such as wave, tidal, enhanced geothermal, and 3rd generation photovoltaic technologies - must prove their technical merits and achieve cost parity with conventional sources of supply. BC Hydro, a government-owned electric utility, launched an Alternative and Emerging Energy Strategy that describes its role as an enabler of technology innovation. This paper describes BC Hydro's goal, objectives and actions to accelerate the commercialization that will yield a diversity of supply options and a growing, local clean-tech cluster.

  10. Controlled Environments Enable Adaptive Management in Aquatic Ecosystems Under Altered Environments

    Science.gov (United States)

    Bubenheim, David L.

    2016-01-01

    Ecosystems worldwide are impacted by altered environment conditions resulting from climate, drought, and land use changes. Gaps in the science knowledge base regarding plant community response to these novel and rapid changes limit both science understanding and management of ecosystems. We describe how CE Technologies have enabled the rapid supply of gap-filling science, development of ecosystem simulation models, and remote sensing assessment tools to provide science-informed, adaptive management methods in the impacted aquatic ecosystem of the California Sacramento-San Joaquin River Delta. The Delta is the hub for California's water, supplying Southern California agriculture and urban communities as well as the San Francisco Bay area. The changes in environmental conditions including temperature, light, and water quality and associated expansion of invasive aquatic plants negatively impact water distribution and ecology of the San Francisco Bay/Delta complex. CE technologies define changes in resource use efficiencies, photosynthetic productivity, evapotranspiration, phenology, reproductive strategies, and spectral reflectance modifications in native and invasive species in response to altered conditions. We will discuss how the CE technologies play an enabling role in filling knowledge gaps regarding plant response to altered environments, parameterization and validation of ecosystem models, development of satellite-based, remote sensing tools, and operational management strategies.

  11. PACFEST 2004 : enabling technologies for maritime security in the Pacific region.

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Judy Hennessey; Whitley, John B.; Chellis, Craig (Pacific Disaster Center, Kihei, HI)

    2005-06-01

    In October of 2003 experts involved in various aspects of homeland security from the Pacific region met to engage in a free-wheeling discussion and brainstorming (a 'fest') on the role that technology could play in winning the war on terrorism in the Pacific region. The result was a concise and relatively thorough definition of the terrorism problem in the Pacific region, emphasizing the issues unique to Island nations in the Pacific setting, along with an action plan for developing working demonstrations of advanced technological solutions to these issues. Since PacFest 2003, the maritime dimensions of the international security environment have garnered increased attention and interest. To this end, PacFest 2004 sought to identify gaps and enabling technologies for maritime domain awareness and responsive decision-making in the Asia-Pacific region. The PacFest 2004 participants concluded that the technologies and basic information building blocks exist to create a system that would enable the Pacific region government and private organizations to effectively collaborate and share their capabilities and information concerning maritime security. The proposed solution summarized in this report integrates national environments in real time, thereby enabling effective prevention and first response to natural and terrorist induced disasters through better use of national and regional investments in people, infrastructure, systems, processes and standards.

  12. Health-enabling technologies for pervasive health care: on services and ICT architecture paradigms.

    Science.gov (United States)

    Haux, Reinhold; Howe, Jurgen; Marschollek, Michael; Plischke, Maik; Wolf, Klaus-Hendrik

    2008-06-01

    Progress in information and communication technologies (ICT) is providing new opportunities for pervasive health care services in aging societies. To identify starting points of health-enabling technologies for pervasive health care. To describe typical services of and contemporary ICT architecture paradigms for pervasive health care. Summarizing outcomes of literature analyses and results from own research projects in this field. Basic functions for pervasive health care with respect to home care comprise emergency detection and alarm, disease management, as well as health status feedback and advice. These functions are complemented by optional (non-health care) functions. Four major paradigms for contemporary ICT architectures are person-centered ICT architectures, home-centered ICT architectures, telehealth service-centered ICT architectures and health care institution-centered ICT architectures. Health-enabling technologies may lead to both new ways of living and new ways of health care. Both ways are interwoven. This has to be considered for appropriate ICT architectures of sensor-enhanced health information systems. IMIA, the International Medical Informatics Association, may be an appropriate forum for interdisciplinary research exchange on health-enabling technologies for pervasive health care.

  13. Technology-enabled management of communication and swallowing disorders in Parkinson's disease: a systematic scoping review.

    Science.gov (United States)

    Theodoros, Deborah; Aldridge, Danielle; Hill, Anne J; Russell, Trevor

    2018-06-19

    Communication and swallowing disorders are highly prevalent in people with Parkinson's disease (PD). Maintenance of functional communication and swallowing over time is challenging for the person with PD and their families and may lead to social isolation and reduced quality of life if not addressed. Speech and language therapists (SLTs) face the conundrum of providing sustainable and flexible services to meet the changing needs of people with PD. Motor, cognitive and psychological issues associated with PD, medication regimens and dependency on others often impede attendance at a centre-based service. The access difficulties experienced by people with PD require a disruptive service approach to meet their needs. Technology-enabled management using information and telecommunications technologies to provide services at a distance has the potential to improve access, and enhance the quality of SLT services to people with PD. To report the status and scope of the evidence for the use of technology in the management of the communication and swallowing disorders associated with PD. Studies were retrieved from four major databases (PubMed, CINAHL, EMBASE and Medline via Web of Science). Data relating to the types of studies, level of evidence, context, nature of the management undertaken, participant perspectives and the types of technologies involved were extracted for the review. A total of 17 studies were included in the review, 15 of which related to the management of communication and swallowing disorders in PD with two studies devoted to participant perspectives. The majority of the studies reported on the treatment of the speech disorder in PD using Lee Silverman Voice Treatment (LSVT LOUD ® ). Synchronous and asynchronous technologies were used in the studies with a predominance of the former. There was a paucity of research in the management of cognitive-communication and swallowing disorders. Research evidence supporting technology-enabled management of the

  14. Heatshield for Extreme Entry Environment Technology (HEEET) Enabling Missions Beyond Heritage Carbon Phenolic

    Science.gov (United States)

    Ellerby, D.; Beerman, A.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzaes, G.; hide

    2015-01-01

    This poster provides an overview of the requirements, design, development and testing of the 3D Woven TPS being developed under NASAs Heatshield for Extreme Entry Environment Technology (HEEET) project. Under this current program, NASA is working to develop a Thermal Protection System (TPS) capable of surviving entry into Venus or Saturn. A primary goal of the project is to build and test an Engineering Test Unit (ETU) to establish a Technical Readiness Level (TRL) of 6 for this technology by 2017.

  15. Heatshield for Extreme Entry Environment Technology (HEEET) - Enabling Missions Beyond Heritage Carbon Phenolic

    Science.gov (United States)

    Ellerby, D.; Beerman, A.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; hide

    2015-01-01

    This poster provides an overview of the requirements, design, development and testing of the 3D Woven TPS being developed under NASA's Heatshield for Extreme Entry Environment Technology (HEEET) project. Under this current program, NASA is working to develop a Thermal Protection System (TPS) capable of surviving entry into Venus or Saturn. A primary goal of the project is to build and test an Engineering Test Unit (ETU) to establish a Technical Readiness Level (TRL) of 6 for this technology by 2017.

  16. Advanced light source technologies that enable high-volume manufacturing of DUV lithography extensions

    Science.gov (United States)

    Cacouris, Theodore; Rao, Rajasekhar; Rokitski, Rostislav; Jiang, Rui; Melchior, John; Burfeindt, Bernd; O'Brien, Kevin

    2012-03-01

    Deep UV (DUV) lithography is being applied to pattern increasingly finer geometries, leading to solutions like double- and multiple-patterning. Such process complexities lead to higher costs due to the increasing number of steps required to produce the desired results. One of the consequences is that the lithography equipment needs to provide higher operating efficiencies to minimize the cost increases, especially for producers of memory devices that experience a rapid decline in sales prices of these products over time. In addition to having introduced higher power 193nm light sources to enable higher throughput, we previously described technologies that also enable: higher tool availability via advanced discharge chamber gas management algorithms; improved process monitoring via enhanced on-board beam metrology; and increased depth of focus (DOF) via light source bandwidth modulation. In this paper we will report on the field performance of these technologies with data that supports the desired improvements in on-wafer performance and operational efficiencies.

  17. Enabling Patient Control of Personal Electronic Health Records Through Distributed Ledger Technology.

    Science.gov (United States)

    Cunningham, James; Ainsworth, John

    2017-01-01

    The rise of distributed ledger technology, initiated and exemplified by the Bitcoin blockchain, is having an increasing impact on information technology environments in which there is an emphasis on trust and security. Management of electronic health records, where both conformation to legislative regulations and maintenance of public trust are paramount, is an area where the impact of these new technologies may be particularly beneficial. We present a system that enables fine-grained personalized control of third-party access to patients' electronic health records, allowing individuals to specify when and how their records are accessed for research purposes. The use of the smart contract based Ethereum blockchain technology to implement this system allows it to operate in a verifiably secure, trustless, and openly auditable environment, features crucial to health information systems moving forward.

  18. Mapping industrial systems - a supply network perspective on enabling technologies, processes and actors

    OpenAIRE

    Srai, Jagjit Singh

    2016-01-01

    This is the author accepted manuscript. The final version is available from InderScience Publishers via http://dx.doi.org/10.1504/IJMTM.2017.10002927 This paper develops a multi-layered multi-stage mapping approach to explore the characteristics of emerging industry supply networks (EI SNs), and how enabling production technologies and supply chain processes are supported by institutional, industrial and supply network actors. The mapping methodology involves the systematic capture of mate...

  19. Current status and future prospects for enabling chemistry technology in the drug discovery process.

    Science.gov (United States)

    Djuric, Stevan W; Hutchins, Charles W; Talaty, Nari N

    2016-01-01

    This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of "dangerous" reagents. Also featured are advances in the "computer-assisted drug design" area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities.

  20. Current status and future prospects for enabling chemistry technology in the drug discovery process

    Science.gov (United States)

    Djuric, Stevan W.; Hutchins, Charles W.; Talaty, Nari N.

    2016-01-01

    This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of “dangerous” reagents. Also featured are advances in the “computer-assisted drug design” area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities. PMID:27781094

  1. How do digital platforms for ideas, technologies, and knowledge transfer act as enablers for digital transformation?

    OpenAIRE

    Hossain, Mokter; Lassen, Astrid Heidemann

    2017-01-01

    Digital platforms, along with their supporting tools and features, have emerged as important enablers for firms to leverage distributed knowledge (Sedera et al., 2016), because they offer new ways for organizations to collaborate with the external environment for ideas, technologies, and knowledge. Indeed, studies have explored efforts to promote such collaboration on digital platforms with various popular names, such as crowdsourcing platforms (Afuah & Tucci, 2012), open innovation platf...

  2. Prospective Technology Assessment of Synthetic Biology: Fundamental and Propaedeutic Reflections in Order to Enable an Early Assessment.

    Science.gov (United States)

    Schmidt, Jan Cornelius

    2016-08-01

    Synthetic biology is regarded as one of the key technosciences of the future. The goal of this paper is to present some fundamental considerations to enable procedures of a technology assessment (TA) of synthetic biology. To accomplish such an early "upstream" assessment of a not yet fully developed technology, a special type of TA will be considered: Prospective TA (ProTA). At the center of ProTA are the analysis and the framing of "synthetic biology," including a characterization and assessment of the technological core. The thesis is that if there is any differentia specifica giving substance to the umbrella term "synthetic biology," it is the idea of harnessing self-organization for engineering purposes. To underline that we are likely experiencing an epochal break in the ontology of technoscientific systems, this new type of technology is called "late-modern technology." -I start this paper by analyzing the three most common visions of synthetic biology. Then I argue that one particular vision deserves more attention because it underlies the others: the vision of self-organization. I discuss the inherent limits of this new type of late-modern technology in the attempt to control and monitor possible risk issues. I refer to Hans Jonas' ethics and his early anticipation of the risks of a novel type of technology. I end by drawing conclusions for the approach of ProTA towards an early societal shaping of synthetic biology.

  3. A Systematic Review of Reviews Evaluating Technology-Enabled Diabetes Self-Management Education and Support.

    Science.gov (United States)

    Greenwood, Deborah A; Gee, Perry M; Fatkin, Kathy J; Peeples, Malinda

    2017-09-01

    Since the introduction of mobile phones, technology has been increasingly used to enable diabetes self-management education and support. This timely systematic review summarizes how currently available technology impacts outcomes for people living with diabetes. A systematic review of high quality review articles and meta analyses focused on utilizing technology in diabetes self-management education and support services was conducted. Articles were included if published between January 2013 and January 2017. Twenty-five studies were included for analysis. The majority evaluated the use of mobile phones and secure messaging. Most studies described healthy eating, being active and metabolic monitoring as the predominant self-care behaviors evaluated. Eighteen of 25 reviews reported significant reduction in A1c as an outcome measure. Four key elements emerged as essential for improved A1c: (1) communication, (2) patient-generated health data, (3) education, and (4) feedback. Technology-enabled diabetes self-management solutions significantly improve A1c. The most effective interventions incorporated all the components of a technology-enabled self-management feedback loop that connected people with diabetes and their health care team using 2-way communication, analyzed patient-generated health data, tailored education, and individualized feedback. The evidence from this systematic review indicates that organizations, policy makers and payers should consider integrating these solutions in the design of diabetes self-management education and support services for population health and value-based care models. With the widespread adoption of mobile phones, digital health solutions that incorporate evidence-based, behaviorally designed interventions can improve the reach and access to diabetes self-management education and ongoing support.

  4. Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in COAL IGCC Powerplants

    Energy Technology Data Exchange (ETDEWEB)

    Kenneth A. Yackly

    2004-09-30

    The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, has been re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for Coal IGCC powerplants. The new program has been re-titled as ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants'' to better match the new scope. This technical progress report summarizes the work accomplished in the reporting period April 1, 2004 to August 31, 2004 on the revised Re-Directed and De-Scoped program activity. The program Tasks are: Task 1--IGCC Environmental Impact on high Temperature Materials: This first materials task has been refocused to address Coal IGCC environmental impacts on high temperature materials use in gas turbines and remains in the program. This task will screen material performance and quantify the effects of high temperature erosion and corrosion of hot gas path materials in Coal IGCC applications. The materials of interest will include those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: This second task develops and demonstrates new sensor technologies to determine the in-service health of advanced technology Coal IGCC powerplants, and remains in the program with a reduced scope. Its focus is now on only two critical sensor need areas for advanced Coal IGCC gas turbines: (1) Fuel Quality Sensor for detection of fuel impurities that could lead to rapid component degradation, and a Fuel Heating Value Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware.

  5. Do 'enabling technologies' affect customer performance in price-responsive load programs?

    International Nuclear Information System (INIS)

    Goldman, Charles A.; Kintner-Meyer, Michael; Heffner, Grayson

    2002-01-01

    Price-responsive load (PRL) programs vary significantly in overall design, the complexity of relationships between program administrators, load aggregators, and customers, and the availability of ''enabling technologies''. Enabling technologies include such features as web-based power system and price monitoring, control and dispatch of curtailable loads, communications and information systems links to program participants, availability of interval metering data to customers in near real time, and building/facility/end-use automation and management capabilities. Two state agencies - NYSERDA in New York and the CEC in California - have been conspicuous leaders in the demonstration of demand response (DR) programs utilizing enabling technologies. In partnership with key stakeholders in these two states (e.g., grid operator, state energy agencies, and program administrators), Lawrence Berkeley National Laboratory (LBNL) and Pacific Northwest National Laboratory (PNNL) surveyed 56 customers who worked with five contractors participating in CEC or NYSERDA-sponsored DR programs. We combined market research and actual load curtailment data when available (i.e., New York) or customer load reduction targets in order to explore the relative importance of contractor's program design features, sophistication of control strategies, and reliance on enabling technologies in predicting customer's ability to deliver load reductions in DR programs targeted to large commercial/industrial customers. We found preliminary evidence that DR enabling technology has a positive effect on load curtailment potential. Many customers indicated that web-based energy information tools were useful for facilitating demand response (e.g., assessing actual performance compared to load reduction contract commitments), that multiple notification channels facilitated timely response, and that support for and use of backup generation allowed customers to achieve significant and predictable load

  6. HTS machines as enabling technology for all-electric airborne vehicles

    International Nuclear Information System (INIS)

    Masson, P J; Brown, G V; Soban, D S; Luongo, C A

    2007-01-01

    Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development

  7. HTS machines as enabling technology for all-electric airborne vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Masson, P J [FAMU-FSU College of Engineering and the Center for Advanced Power Systems, Tallahassee, FL 32310 (United States); Brown, G V [NASA Glenn Research Center, Cleveland, OH (United States); Soban, D S [Aerospace System Design Laboratory/Georgia Tech, Atlanta, GA 32332 (United States); Luongo, C A [FAMU-FSU College of Engineering and the Center for Advanced Power Systems, Tallahassee, FL 32310 (United States)

    2007-08-15

    Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development.

  8. Cognitive Spectrum Sharing: An Enabling Wireless Communication Technology for a Wide Use of Smart Systems

    Directory of Open Access Journals (Sweden)

    Romano Fantacci

    2016-05-01

    Full Text Available A smart city is an environment where a pervasive, multi-service network is employed to provide citizens improved living conditions as well as better public safety and security. Advanced communication technologies are essential to achieve this goal. In particular, an efficient and reliable communication network plays a crucial role in providing continue, ubiquitous, and reliable interconnections among users, smart devices, and applications. As a consequence, wireless networking appears as the principal enabling communication technology despite the necessity to face severe challenges to satisfy the needs arising from a smart environment, such as explosive data volume, heterogeneous data traffic, and support of quality of service constraints. An interesting approach for meeting the growing data demand due to smart city applications is to adopt suitable methodologies to improve the usage of all potential spectrum resources. Towards this goal, a very promising solution is represented by the Cognitive Radio technology that enables context-aware capability in order to pursue an efficient use of the available communication resources according to the surrounding environment conditions. In this paper we provide a review of the characteristics, challenges, and solutions of a smart city communication architecture, based on the Cognitive Radio technology, by focusing on two new network paradigms—namely, Heterogeneous Network and Machines-to-Machines communications—that are of special interest to efficiently support smart city applications and services.

  9. Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants

    Energy Technology Data Exchange (ETDEWEB)

    Kenneth A. Yackly

    2005-12-01

    The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, was re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for coal/IGCC powerplants. The new program was re-titled ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants''. This final report summarizes the work accomplished from March 1, 2003 to March 31, 2004 on the four original tasks, and the work accomplished from April 1, 2004 to July 30, 2005 on the two re-directed tasks. The program Tasks are summarized below: Task 1--IGCC Environmental Impact on high Temperature Materials: The first task was refocused to address IGCC environmental impacts on high temperature materials used in gas turbines. This task screened material performance and quantified the effects of high temperature erosion and corrosion of hot gas path materials in coal/IGCC applications. The materials of interest included those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: The second task was reduced in scope to demonstrate new technologies to determine the inservice health of advanced technology coal/IGCC powerplants. The task focused on two critical sensing needs for advanced coal/IGCC gas turbines: (1) Fuel Quality Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and detection of fuel impurities that could lead to rapid component degradation. (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware. Task 3--Advanced Methods for Combustion Monitoring and Control: The third task was originally to develop and validate advanced monitoring and control methods for coal/IGCC gas

  10. Enabling Technologies for Smart Grid Integration and Interoperability of Electric Vehicles

    DEFF Research Database (Denmark)

    Martinenas, Sergejus

    Conventional, centralized power plants are being replaced by intermittent, distributed renewable energy sources, thus raising the concern about the stability of the power grid in its current state. All the while, electrification of all forms of transportation is increasing the load...... for successful EV integration into the smart grid, as a smart, mobile distributed energy resource. The work is split into three key topics: enabling technologies, grid service applications and interoperability issues. The current state of e-mobility technologies is surveyed. Technologies and protocols...... EVs to not only mitigate their own effects on the grid, but also provide value to grid operators, locally as well as system wide. Finally, it is shown that active integration of EVs into the smart grid, is not only achievable, but is well on its way to becoming a reality....

  11. The Technology-Enabled Patient Advocate: A Valuable Emerging Healthcare Partner.

    Science.gov (United States)

    Kent, Susan M; Yellowlees, Peter

    2015-12-01

    The U.S. healthcare system is changing and is becoming more patient-centered and technology-supported, with greater emphasis on population health outcomes and team-based care. The roles of healthcare providers are changing, and new healthcare roles are developing such as that of the patient advocate. This article reviews the history of this type of role, the changes that have taken place over time, the technological innovations in service delivery that further enable the role, and how the role could increasingly be developed in the future. Logical future extensions of the current typical patient advocate are the appearance of a virtual or avatar-driven care navigator, using telemedicine and related information technologies, as healthcare provision moves increasingly in a hybrid direction, with care being given both in-person and online.

  12. Applications of Organic and Printed Electronics A Technology-Enabled Revolution

    CERN Document Server

    2013-01-01

    Organic and printed electronics can enable a revolution in the applications of electronics and this book offers readers an overview of the state-of-the-art in this rapidly evolving domain.  The potentially low cost, compatibility with flexible substrates and the wealth of devices that characterize organic and printed electronics will make possible applications that go far beyond the well-known displays made with large-area silicon electronics. Since organic electronics are still in their early stage, undergoing transition from lab-scale and prototype activities to production, this book serves as a valuable snapshot of the current landscape of the different devices enabled by this technology, reviewing all applications that are developing and those can be foreseen.   Provides a complete roadmap for organic and printed electronics research and development for the next several years; Includes an overview of the printing processes for organic electronics, along with state of the art applications, such as solar ...

  13. The future of drug discovery: enabling technologies for enhancing lead characterization and profiling therapeutic potential.

    Science.gov (United States)

    Janero, David R

    2014-08-01

    Technology often serves as a handmaiden and catalyst of invention. The discovery of safe, effective medications depends critically upon experimental approaches capable of providing high-impact information on the biological effects of drug candidates early in the discovery pipeline. This information can enable reliable lead identification, pharmacological compound differentiation and successful translation of research output into clinically useful therapeutics. The shallow preclinical profiling of candidate compounds promulgates a minimalistic understanding of their biological effects and undermines the level of value creation necessary for finding quality leads worth moving forward within the development pipeline with efficiency and prognostic reliability sufficient to help remediate the current pharma-industry productivity drought. Three specific technologies discussed herein, in addition to experimental areas intimately associated with contemporary drug discovery, appear to hold particular promise for strengthening the preclinical valuation of drug candidates by deepening lead characterization. These are: i) hydrogen-deuterium exchange mass spectrometry for characterizing structural and ligand-interaction dynamics of disease-relevant proteins; ii) activity-based chemoproteomics for profiling the functional diversity of mammalian proteomes; and iii) nuclease-mediated precision gene editing for developing more translatable cellular and in vivo models of human diseases. When applied in an informed manner congruent with the clinical understanding of disease processes, technologies such as these that span levels of biological organization can serve as valuable enablers of drug discovery and potentially contribute to reducing the current, unacceptably high rates of compound clinical failure.

  14. Enabling Equal Access to Molecular Diagnostics: What Are the Implications for Policy and Health Technology Assessment?

    Science.gov (United States)

    Plun-Favreau, Juliette; Immonen-Charalambous, Kaisa; Steuten, Lotte; Strootker, Anja; Rouzier, Roman; Horgan, Denis; Lawler, Mark

    2016-01-01

    Molecular diagnostics can offer important benefits to patients and are a key enabler of the integration of personalised medicine into health care systems. However, despite their promise, few molecular diagnostics are embedded into clinical practice (especially in Europe) and access to these technologies remains unequal across countries and sometimes even within individual countries. If research translation and the regulatory environments have proven to be more challenging than expected, reimbursement and value assessment remain the main barriers to providing patients with equal access to molecular diagnostics. Unclear or non-existent reimbursement pathways, together with the lack of clear evidence requirements, have led to significant delays in the assessment of molecular diagnostics technologies in certain countries. Additionally, the lack of dedicated diagnostics budgets and the siloed nature of resource allocation within certain health care systems have significantly delayed diagnostics commissioning. This article will consider the perspectives of different stakeholders (patients, health care payers, health care professionals, and manufacturers) on the provision of a research-enabled, patient-focused molecular diagnostics platform that supports optimal patient care. Through the discussion of specific case studies, and building on the experience from countries that have successfully integrated molecular diagnostics into clinical practice, this article will discuss the necessary evolutions in policy and health technology assessment to ensure that patients can have equal access to appropriate molecular diagnostics. © 2016 S. Karger AG, Basel.

  15. Exploring students’ uses of and dispositions towards learning technologies in an Australian enabling course

    Directory of Open Access Journals (Sweden)

    Rhian Morgan

    2018-02-01

    Full Text Available University progression is increasingly dependent upon students developing a range of digital literacies in conjunction with the skills associated with their disciplines. University enabling and pathway programs, in particular, have a key part to play in supporting students to interact with technologies for learning. Widening participation and increased student diversity result in highly variable levels of digital literacy in the classroom. As such, universities need to develop strategies to effectively respond to the differing abilities of students entering the sector. This paper contributes to the development of such responses through a case study exploring students’ use of and dispositions towards technologies in an open access enabling course. In this context ‘open access’ refers to the course admission requirements and the fact that the course enrollments are open to anyone over the age of eighteen, regardless of their prior schooling experience. The paper identifies trends in students’ uses of technology, such as preferences for mobile content and blended learning environments, before concluding with a discussion of how these findings can be mobilised in curriculum development.

  16. Emission Control Research to Enable Fuel Efficiency: Department of Energy Heavy Vehicle Technologies

    International Nuclear Information System (INIS)

    Gurpreet Singh; Ronald L. Graves; John M. Storey; William P. Partridge; John F. Thomas; Bernie M. Penetrante; Raymond M. Brusasco; Bernard T. Merritt; George E. Vogtlin; Christopher L. Aardahl; Craig F. Habeger; M.L. Balmer

    2000-01-01

    The Office of Heavy Vehicle Technologies supports research to enable high-efficiency diesel engines to meet future emissions regulations, thus clearing the way for their use in light trucks as well as continuing as the most efficient powerplant for freight-haulers. Compliance with Tier 2 rules and expected heavy duty engine standards will require effective exhaust emission controls (after-treatment) for diesels in these applications. DOE laboratories are working with industry to improve emission control technologies in projects ranging from application of new diagnostics for elucidating key mechanisms, to development and tests of prototype devices. This paper provides an overview of these R and D efforts, with examples of key findings and developments

  17. Disabling and Enabling Technologies for Learning in Higher Education for All: Issues and Challenges for Whom?

    Directory of Open Access Journals (Sweden)

    Sangeeta Bagga-Gupta

    2016-10-01

    Full Text Available Integration, inclusion, and equity constitute fundamental dimensions of democracy in post-World War II societies and their institutions. The study presented here reports upon the ways in which individuals and institutions both use and account for the roles that technologies, including ICT, play in disabling and enabling access for learning in higher education for all. Technological innovations during the 20th and 21st centuries, including ICT, have been heralded as holding significant promise for revolutionizing issues of access in societal institutions like schools, healthcare services, etc. (at least in the global North. Taking a socially oriented perspective, the study presented in this paper focuses on an ethnographically framed analysis of two datasets that critically explores the role that technologies, including ICT, play in higher education for individuals who are “differently abled” and who constitute a variation on a continuum of capabilities. Functionality as a dimension of everyday life in higher education in the 21st century is explored through the analysis of (i case studies of two “differently abled” students in Sweden and (ii current support services at universities in Sweden. The findings make visible the work that institutions and their members do through analyses of the organization of time and space and the use of technologies in institutional settings against the backdrop of individuals’ accountings and life trajectories. This study also highlights the relevance of multi-scale data analyses for revisiting the ways in which identity positions become framed or understood within higher education.

  18. China, the United States, and competition for resources that enable emerging technologies

    Science.gov (United States)

    Gulley, Andrew L.; Nassar, Nedal T.; Xun, Sean

    2018-01-01

    Historically, resource conflicts have often centered on fuel minerals (particularly oil). Future resource conflicts may, however, focus more on competition for nonfuel minerals that enable emerging technologies. Whether it is rhenium in jet engines, indium in flat panel displays, or gallium in smart phones, obscure elements empower smarter, smaller, and faster technologies, and nations seek stable supplies of these and other nonfuel minerals for their industries. No nation has all of the resources it needs domestically. International trade may lead to international competition for these resources if supplies are deemed at risk or insufficient to satisfy growing demand, especially for minerals used in technologies important to economic development and national security. Here, we compare the net import reliance of China and the United States to inform mineral resource competition and foreign supply risk. Our analysis indicates that China relies on imports for over half of its consumption for 19 of 42 nonfuel minerals, compared with 24 for the United States—11 of which are common to both. It is for these 11 nonfuel minerals that competition between the United States and China may become the most contentious, especially for those with highly concentrated production that prove irreplaceable in pivotal emerging technologies.

  19. Technological evaluation of gesture and speech interfaces for enabling dismounted soldier-robot dialogue

    Science.gov (United States)

    Kattoju, Ravi Kiran; Barber, Daniel J.; Abich, Julian; Harris, Jonathan

    2016-05-01

    With increasing necessity for intuitive Soldier-robot communication in military operations and advancements in interactive technologies, autonomous robots have transitioned from assistance tools to functional and operational teammates able to service an array of military operations. Despite improvements in gesture and speech recognition technologies, their effectiveness in supporting Soldier-robot communication is still uncertain. The purpose of the present study was to evaluate the performance of gesture and speech interface technologies to facilitate Soldier-robot communication during a spatial-navigation task with an autonomous robot. Gesture and speech semantically based spatial-navigation commands leveraged existing lexicons for visual and verbal communication from the U.S Army field manual for visual signaling and a previously established Squad Level Vocabulary (SLV). Speech commands were recorded by a Lapel microphone and Microsoft Kinect, and classified by commercial off-the-shelf automatic speech recognition (ASR) software. Visual signals were captured and classified using a custom wireless gesture glove and software. Participants in the experiment commanded a robot to complete a simulated ISR mission in a scaled down urban scenario by delivering a sequence of gesture and speech commands, both individually and simultaneously, to the robot. Performance and reliability of gesture and speech hardware interfaces and recognition tools were analyzed and reported. Analysis of experimental results demonstrated the employed gesture technology has significant potential for enabling bidirectional Soldier-robot team dialogue based on the high classification accuracy and minimal training required to perform gesture commands.

  20. Enabling frameworks for low-carbon technology transfer to small emerging economies: Analysis of ten case studies in Chile

    International Nuclear Information System (INIS)

    Pueyo, Ana

    2013-01-01

    Technology transfer is crucial to reduce the carbon intensity of developing countries. Enabling frameworks need to be in place to allow foreign technologies to flow, to be absorbed and to bring about technological change in the recipient country. This paper contributes to identifying these enabling factors by analysing 10 case studies of low-carbon technology transfer processes based in Chile. Our findings show the importance of strong economic and institutional fundamentals, a sound knowledge base, a sizable and stable demand and a functioning local industry. Policy recommendations are derived to improve the penetration of foreign low-carbon technologies in developing countries, focusing on the particularities of small and medium emerging economies. - Highlights: ► We analyse 10 case studies of low carbon technology transfer to Chile. ► We identify enablers of technology transfer to developing countries. ► We provide policy recommendations focusing on small and medium economies.

  1. Broadband integrated mid infrared light sources as enabling technology for point of care mid-infrared spectroscopy

    Science.gov (United States)

    2017-08-20

    AFRL-AFOSR-JP-TR-2017-0061 Broadband integrated mid-infrared light sources as enabling technology for point-of-care mid- infrared spectroscopy Alex...mid-infrared light sources as enabling technology for point-of-care mid-infrared spectroscopy 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA2386-16-1-4037...Broadband integrated mid-infrared light sources as enabling technology for point-of-care mid- infrared spectroscopy ” Date: 16th August 2017 Name

  2. The X-Factor of Cultivating Successful Entrepreneurial Technology-Enabled Start-Ups

    Directory of Open Access Journals (Sweden)

    Elsje Scott

    2016-10-01

    Full Text Available In the fast changing global economic landscape, the cultivation of sustainable entrepreneurial ventures is seen as a vital mechanism that will enable businesses to introduce new innovative products to the market faster and more effectively than their competitors. This research paper investigated phenomena that may play a significant role when entrepreneurs implement creative ideas resulting in successful technology enabled start-ups within the South African market place. Constant and significant changes in technology provide several challenges for entrepreneurship. Various themes such as innovation, work experience, idea generation, education and partnership formation have been explored to assess their impact on entrepreneurship. Reflection and a design thinking approach underpinned a rigorous analysis process to distill themes from the data gathered through semi structured interviews. From the findings it was evident that the primary success influencers include the formation of partnership, iterative cycles, and certain types of education. The secondary influencers included the origination of an idea, the use of innovation. and organizational culture as well as work experience. This research illustrates how Informing Science as a transdisicpline can provide a philosophical underpinning to communicate and synthesise ideas from constituent disciplines in an attempt to create a more cohesive whole. This diverse environment, comprising people, technology, and business, requires blending different elements from across diverse fields to yield better science. With this backdrop, this preliminary study provides an important foundation for further research in the context of a developing country where entrepreneurial ventures may have a socio-economical impact. The themes that emerged through this study could provide avenues for further research.

  3. Self-management of hypertension using technology enabled interventions in primary care settings.

    Science.gov (United States)

    Chandak, Aastha; Joshi, Ashish

    2015-01-01

    Self-management of hypertension by controlling Blood Pressure (BP) through technology-based interventions can effectively reduce the burden of high BP, which affects one out of every three adults in the United States. The primary aim of this study is to explore the role of technology enabled interventions to improve or enhance self-management among individuals with hypertension. We conducted a systematic review of the literature published between July 2008 and June 2013 on the MEDLINE database (via PubMed interface) during July 2013. The search words were "hypertension" and "primary care" in combination with each of the terms of "technology", "internet", "computer" and "cell phone". Our inclusion criteria consisted of: (a) Randomized Controlled Trials (RCTs) (b) conducted on human subjects; (c) technology-based interventions (d) to improve self-management (e) of hypertension and if the (f) final results of the study were published in the study. Our exclusion criteria included (a) management of other conditions and (b) literature reviews. The initial search resulted in 108 results. After applying the inclusion and exclusion criteria, a total of 12 studies were analyzed. Various technologies implemented in the studies included internet-based telemonitoring and education, telephone-based telemonitoring and education, internet-based education, telemedicine via videoconferencing, telehealth kiosks and automated modem device. Some studies also involved a physician intervention, in addition to patient intervention. The outcomes of proportion of subjects with BP control and change in mean SBP and DBP were better for the group of subjects who received combined physician and patient interventions. Interventions to improve BP control for self-management of hypertension should be aimed at both physicians as well as the patients. More interventions should utilize the JNC-7 guidelines and cost-effectiveness of the intervention should also be assessed.

  4. How IMS Enables Converged Services for Cable and 3G Technologies: A Survey

    Directory of Open Access Journals (Sweden)

    Mani Mehdi

    2008-01-01

    Full Text Available The IP multimedia subsystem (IMS is a service control overlay standardized by the 3GPP. The IMS is based on session initiation protocol (SIP to establish, modify, and terminate the sessions. It provides a clean separation between services, signaling, and media with the potential to enable control and management of services over multiple transport technologies. In the scope of fixed-mobile convergence, this paper is dedicated to presenting a review of how cable networks can be integrated into IMS technology to achieve 3G-cable horizontal convergence. Cable networks, as one of the major fixed broadband access technologies with PacketCable architecture, are able to provide broadband internet access and VoIP in addition to cable TV. In this article, we review the evolution in PacketCable architecture to take up IMS. In this way, we consider the standardization and research activities to address this integration. We review some important challenges such as SIP protocol compatibility, defining unique user profile, required enhancement in authentication process, QoS and charging system.

  5. How IMS Enables Converged Services for Cable and 3G Technologies: A Survey

    Directory of Open Access Journals (Sweden)

    Noël Crespi

    2008-04-01

    Full Text Available The IP multimedia subsystem (IMS is a service control overlay standardized by the 3GPP. The IMS is based on session initiation protocol (SIP to establish, modify, and terminate the sessions. It provides a clean separation between services, signaling, and media with the potential to enable control and management of services over multiple transport technologies. In the scope of fixed-mobile convergence, this paper is dedicated to presenting a review of how cable networks can be integrated into IMS technology to achieve 3G-cable horizontal convergence. Cable networks, as one of the major fixed broadband access technologies with PacketCable architecture, are able to provide broadband internet access and VoIP in addition to cable TV. In this article, we review the evolution in PacketCable architecture to take up IMS. In this way, we consider the standardization and research activities to address this integration. We review some important challenges such as SIP protocol compatibility, defining unique user profile, required enhancement in authentication process, QoS and charging system.

  6. Visible quality aluminum and nickel superpolish polishing technology enabling new missions

    Science.gov (United States)

    Carrigan, Keith G.

    2011-06-01

    It is now well understood that with US Department of Defense (DoD) budgets shrinking and the Services and Agencies demanding new systems which can be fielded more quickly, cost and schedule are being emphasized more and more. At the same time, the US has ever growing needs for advanced capabilities to support evolving Intelligence, Surveillance and Reconnaissance objectives. In response to this market demand for ever more cost-effective, faster to market, single-channel, athermal optical systems, we have developed new metal polishing technologies which allow for short-lead, low-cost metal substrates to replace more costly, longer-lead material options. In parallel, the commercial marketplace is being driven continually to release better, faster and cheaper electronics. Growth according to Moore's law, enabled by advancements in photolithography, has produced denser memory, higher resolution displays and faster processors. While the quality of these products continues to increase, their price is falling. This seeming paradox is driven by industry advancements in manufacturing technology. The next steps on this curve can be realized via polishing technology which allows low-cost metal substrates to replace costly Silicon based optics for use in ultra-short wavelength systems.

  7. Blending technological, cognitive and social enablers to develop an immersive virtual learning environment for construction engineering education

    NARCIS (Netherlands)

    Keenaghan, G.N.

    2018-01-01

    The conceptual framework of the proposed novel system was to provide a stimulating learning experience for dislocated digital learners, who are seen as individuals with different perceptions and expectations. In addition to functionally integrate technological, cognitive and social enablers, the

  8. PEAC: A Power-Efficient Adaptive Computing Technology for Enabling Swarm of Small Spacecraft and Deployable Mini-Payloads

    Data.gov (United States)

    National Aeronautics and Space Administration — This task is to develop and demonstrate a path-to-flight and power-adaptive avionics technology PEAC (Power Efficient Adaptive Computing). PEAC will enable emerging...

  9. Alliance group formation: enabling and constraining effects of embeddedness and social capital in strategic technology alliance networks

    NARCIS (Netherlands)

    Duysters, G.M.; Lemmens, C.E.A.V.

    2003-01-01

    The role of embeddedness and social capital in the process of alliance group formation in strategic technology alliance networks is examined. In particular, the social mechanisms that enable and enforce alliance group formation is studies. It is argued that the enabling effect of embeddedness during

  10. How do digital platforms for ideas, technologies, and knowledge transfer act as enablers for digital transformation?

    DEFF Research Database (Denmark)

    Hossain, Mokter; Lassen, Astrid Heidemann

    2017-01-01

    Digital platforms, along with their supporting tools and features, have emerged as important enablers for firms to leverage distributed knowledge (Sedera et al., 2016), because they offer new ways for organizations to collaborate with the external environment for ideas, technologies, and knowledge...... for research and development (R&D), idea generation, prediction, freelance work, peer production, co-creation, product design, and public engagement, to name but a few. For example, Dell’s IdeaStorm (Hossain & Islam, 2015a) and Starbucks’ MyStarbucksIdea (Hossain & Islam, 2015b) are two digital crowdsourcing...... platforms that are used to engage crowds to solicit ideas from them (Bayus, 2013; Chua & Banerjee, 2013). Moreover, intermediary platforms, such as InnoCentive and IdeaConnection, are organizing online competitions to solve the problems of various organizations (Hossain, 2012). Although digital platforms...

  11. Aeroelastic Tailoring of Transport Aircraft Wings: State-of-the-Art and Potential Enabling Technologies

    Science.gov (United States)

    Jutte, Christine; Stanford, Bret K.

    2014-01-01

    This paper provides a brief overview of the state-of-the-art for aeroelastic tailoring of subsonic transport aircraft and offers additional resources on related research efforts. Emphasis is placed on aircraft having straight or aft swept wings. The literature covers computational synthesis tools developed for aeroelastic tailoring and numerous design studies focused on discovering new methods for passive aeroelastic control. Several new structural and material technologies are presented as potential enablers of aeroelastic tailoring, including selectively reinforced materials, functionally graded materials, fiber tow steered composite laminates, and various nonconventional structural designs. In addition, smart materials and structures whose properties or configurations change in response to external stimuli are presented as potential active approaches to aeroelastic tailoring.

  12. The Nuclear Energy Advanced Modeling and Simulation Enabling Computational Technologies FY09 Report

    Energy Technology Data Exchange (ETDEWEB)

    Diachin, L F; Garaizar, F X; Henson, V E; Pope, G

    2009-10-12

    In this document we report on the status of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Enabling Computational Technologies (ECT) effort. In particular, we provide the context for ECT In the broader NEAMS program and describe the three pillars of the ECT effort, namely, (1) tools and libraries, (2) software quality assurance, and (3) computational facility (computers, storage, etc) needs. We report on our FY09 deliverables to determine the needs of the integrated performance and safety codes (IPSCs) in these three areas and lay out the general plan for software quality assurance to meet the requirements of DOE and the DOE Advanced Fuel Cycle Initiative (AFCI). We conclude with a brief description of our interactions with the Idaho National Laboratory computer center to determine what is needed to expand their role as a NEAMS user facility.

  13. Introducing a technology-enabled problem-based learning approach into a health informatics curriculum.

    Science.gov (United States)

    Green, Carolyn J; van Gyn, Geraldine H; Moehr, Jochen R; Lau, Francis Y; Coward, Patricia M

    2004-03-18

    To investigate the effect on learner satisfaction of introducing a technology-enabled problem-based learning (PBL) approach into a health informatics curriculum. Course redesign was undertaken to prepare students for three 4-month work terms and a rapidly changing professional environment upon graduation. Twenty-six Canadian undergraduate students of a redesigned course in biomedical fundamentals completed a midterm questionnaire in 2002. Eight of these students participated in a focus group. Students agreed that seven of nine functions provided by the web-based online course management system enhanced their learning: private email (92.3%), calendaring (88.5%), course notes (88.5%), discussion forums (84.5%), online grades (84.5%) assignment descriptions (80.8%) and online quizzes (80.8%). Although students agreed that two PBL activities enhanced learning (learning to present information) (84.5%) and learning to identify information needed (73.1%), the majority of students (69.2%) expressed a preference for the traditional lecture approach over the PBL approach. Students reported feeling uncertain of what was required of them and related anxiety accounted for most of the negative feedback. These findings give us clear goals for improvement in the course beginning with a comprehensive, carefully guided introduction to the processes of PBL. The positive trends are encouraging for the use of web-enabled courseware and for the further development of the PBL approach.

  14. New Content Addressable Memory (CAM) Technologies for Big Data and Intelligent Electronics Enabled by Magneto-Electric Ternary CAM

    Science.gov (United States)

    2017-12-11

    AFRL-RY-WP-TR-2017-0198 NEW CONTENT ADDRESSABLE MEMORY (CAM) TECHNOLOGIES FOR BIG DATA AND INTELLIGENT ELECTRONICS ENABLED BY MAGNETO-ELECTRIC...MEMORY (CAM) TECHNOLOGIES FOR BIG DATA AND INTELLIGENT ELECTRONICS ENABLED BY MAGNETO-ELECTRIC TERNARY CAM 5a. CONTRACT NUMBER FA8650-16-1-7655 5b... electronic applications, such as internet of things, big data, wireless sensors, and mobile devices, have begun to focus on the importance of energy

  15. CMOS technology: a critical enabler for free-form electronics-based killer applications

    Science.gov (United States)

    Hussain, Muhammad M.; Hussain, Aftab M.; Hanna, Amir

    2016-05-01

    Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today's CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics - and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path.

  16. CMOS technology: a critical enabler for free-form electronics-based killer applications

    KAUST Repository

    Hussain, Muhammad Mustafa

    2016-05-17

    Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today’s CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics – and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is

  17. An easily reversible structural change underlies mechanisms enabling desert crust cyanobacteria to survive desiccation.

    Science.gov (United States)

    Bar-Eyal, Leeat; Eisenberg, Ido; Faust, Adam; Raanan, Hagai; Nevo, Reinat; Rappaport, Fabrice; Krieger-Liszkay, Anja; Sétif, Pierre; Thurotte, Adrien; Reich, Ziv; Kaplan, Aaron; Ohad, Itzhak; Paltiel, Yossi; Keren, Nir

    2015-10-01

    Biological desert sand crusts are the foundation of desert ecosystems, stabilizing the sands and allowing colonization by higher order organisms. The first colonizers of the desert sands are cyanobacteria. Facing the harsh conditions of the desert, these organisms must withstand frequent desiccation-hydration cycles, combined with high light intensities. Here, we characterize structural and functional modifications to the photosynthetic apparatus that enable a cyanobacterium, Leptolyngbya sp., to thrive under these conditions. Using multiple in vivo spectroscopic and imaging techniques, we identified two complementary mechanisms for dissipating absorbed energy in the desiccated state. The first mechanism involves the reorganization of the phycobilisome antenna system, increasing excitonic coupling between antenna components. This provides better energy dissipation in the antenna rather than directed exciton transfer to the reaction center. The second mechanism is driven by constriction of the thylakoid lumen which limits diffusion of plastocyanin to P700. The accumulation of P700(+) not only prevents light-induced charge separation but also efficiently quenches excitation energy. These protection mechanisms employ existing components of the photosynthetic apparatus, forming two distinct functional modes. Small changes in the structure of the thylakoid membranes are sufficient for quenching of all absorbed energy in the desiccated state, protecting the photosynthetic apparatus from photoinhibitory damage. These changes can be easily reversed upon rehydration, returning the system to its high photosynthetic quantum efficiency. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. 48 CFR 27.204 - Patented technology under trade agreements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Patented technology under trade agreements. 27.204 Section 27.204 Federal Acquisition Regulations System FEDERAL ACQUISITION... Patented technology under trade agreements. ...

  19. Enabling technologies for silicon microstrip tracking detectors at the HL-LHC

    International Nuclear Information System (INIS)

    Feld, L.; Karpinski, W.; Klein, K.

    2016-04-01

    While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an environment in which both the hit densities and the radiation damage will be about an order of magnitude higher than today. In addition, the new trackers need to contribute to the first level trigger in order to maintain a high data-taking efficiency for the interesting processes. Novel detector technologies have to be developed to meet these very challenging goals. The German groups active in the upgrades of the ATLAS and CMS tracking systems have formed a collaborative ''Project on Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC'' (PETTL), which was supported by the Helmholtz Alliance ''Physics at the Terascale'' during the years 2013 and 2014. The aim of the project was to share experience and to work together on key areas of mutual interest during the R and D phase of these upgrades. The project concentrated on five areas, namely exchange of experience, radiation hardness of silicon sensors, low mass system design, automated precision assembly procedures, and irradiations. This report summarizes the main achievements.

  20. The CYGNSS flight segment; A major NASA science mission enabled by micro-satellite technology

    Science.gov (United States)

    Rose, R.; Ruf, C.; Rose, D.; Brummitt, M.; Ridley, A.

    While hurricane track forecasts have improved in accuracy by ~50% since 1990, there has been essentially no improvement in the accuracy of intensity prediction. This lack of progress is thought to be caused by inadequate observations and modeling of the inner core due to two causes: 1) much of the inner core ocean surface is obscured from conventional remote sensing instruments by intense precipitation in the inner rain bands and 2) the rapidly evolving stages of the tropical cyclone (TC) life cycle are poorly sampled in time by conventional polar-orbiting, wide-swath surface wind imagers. NASA's most recently awarded Earth science mission, the NASA EV-2 Cyclone Global Navigation Satellite System (CYGNSS) has been designed to address these deficiencies by combining the all-weather performance of GNSS bistatic ocean surface scatterometry with the sampling properties of a satellite constellation. This paper provides an overview of the CYGNSS flight segment requirements, implementation, and concept of operations for the CYGNSS constellation; consisting of 8 microsatellite-class spacecraft (historical TC track. The CYGNSS mission is enabled by modern electronic technology; it is an example of how nanosatellite technology can be applied to replace traditional "old school" solutions at significantly reduced cost while providing an increase in performance. This paper provides an overview of how we combined a reliable space-flight proven avionics design with selected microsatellite components to create an innovative, low-cost solution for a mainstream science investigation.

  1. Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC

    CERN Document Server

    Barth, C; Bloch, I.; Bögelspacher, F.; de Boer, W.; Daniels, M.; Dierlamm, A.; Eber, R.; Eckerlin, G.; Eckstein, D.; Eichhorn, T.; Erfle, J.; Feld, L.; Garutti, E.; Gregor, I. -M.; Guthoff, M.; Hartmann, F.; Hauser, M.; Husemann, U.; Jakobs, K.; Junkes, A.; Karpinski, W.; Klein, K.; Kuehn, S.; Lacker, H.; Mahboubi, K.; Müller, Th.; Mussgiller, A.; Nürnberg, A.; Parzefall, U.; Poehlsen, T.; Poley, L.; Preuten, M.; Rehnisch, L.; Sammet, J.; Schleper, P.; Schuwalow, S.; Sperlich, D.; Stanitzki, M.; Steinbrück, G.; Wlochal, M.

    2016-01-01

    While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an environment in which both the hit densities and the radiation damage will be about an order of magnitude higher than today. In addition, the new trackers need to contribute to the first level trigger in order to maintain a high data-taking efficiency for the interesting processes. Novel detector technologies have to be developed to meet these very challenging goals. The German groups active in the upgrades of the ATLAS and CMS tracking systems have formed a collaborative "Project on Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC" (PETTL), which was supported by the Helmholtz Alliance "Phys...

  2. CMOS-Technology-Enabled Flexible and Stretchable Electronics for Internet of Everything Applications

    KAUST Repository

    Hussain, Aftab M.

    2015-11-26

    Flexible and stretchable electronics can dramatically enhance the application of electronics for the emerging Internet of Everything applications where people, processes, data and devices will be integrated and connected, to augment quality of life. Using naturally flexible and stretchable polymeric substrates in combination with emerging organic and molecular materials, nanowires, nanoribbons, nanotubes, and 2D atomic crystal structured materials, significant progress has been made in the general area of such electronics. However, high volume manufacturing, reliability and performance per cost remain elusive goals for wide commercialization of these electronics. On the other hand, highly sophisticated but extremely reliable, batch-fabrication-capable and mature complementary metal oxide semiconductor (CMOS)-based technology has facilitated tremendous growth of today\\'s digital world using thin-film-based electronics; in particular, bulk monocrystalline silicon (100) which is used in most of the electronics existing today. However, one fundamental challenge is that state-of-the-art CMOS electronics are physically rigid and brittle. Therefore, in this work, how CMOS-technology-enabled flexible and stretchable electronics can be developed is discussed, with particular focus on bulk monocrystalline silicon (100). A comprehensive information base to realistically devise an integration strategy by rational design of materials, devices and processes for Internet of Everything electronics is offered. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Enabling technologies for silicon microstrip tracking detectors at the HL-LHC

    Energy Technology Data Exchange (ETDEWEB)

    Feld, L.; Karpinski, W.; Klein, K. [RWTH Aachen Univ. (Germany). 1. Physikalisches Institut B; Collaboration: The PETTL Collaboration; and others

    2016-04-15

    While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an environment in which both the hit densities and the radiation damage will be about an order of magnitude higher than today. In addition, the new trackers need to contribute to the first level trigger in order to maintain a high data-taking efficiency for the interesting processes. Novel detector technologies have to be developed to meet these very challenging goals. The German groups active in the upgrades of the ATLAS and CMS tracking systems have formed a collaborative ''Project on Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC'' (PETTL), which was supported by the Helmholtz Alliance ''Physics at the Terascale'' during the years 2013 and 2014. The aim of the project was to share experience and to work together on key areas of mutual interest during the R and D phase of these upgrades. The project concentrated on five areas, namely exchange of experience, radiation hardness of silicon sensors, low mass system design, automated precision assembly procedures, and irradiations. This report summarizes the main achievements.

  4. Analysis of a Moon outpost for Mars enabling technologies through a Virtual Reality environment

    Science.gov (United States)

    Casini, Andrea E. M.; Maggiore, Paolo; Viola, Nicole; Basso, Valter; Ferrino, Marinella; Hoffman, Jeffrey A.; Cowley, Aidan

    2018-02-01

    The Moon is now being considered as the starting point for human exploration of the Solar System beyond low-Earth orbit. Many national space agencies are actively advocating to build up a lunar surface habitat capability starting from 2030 or earlier: according to ESA Technology Roadmaps for Exploration this should be the result of a broad international cooperation. Taking into account an incremental approach to reduce risks and costs of space missions, a lunar outpost can be considered as a test bed towards Mars, allowing to validate enabling technologies, such as water processing, waste management, power generation and storage, automation, robotics and human factors. Our natural satellite is rich in resources that could be used to pursue such a goal through a necessary assessment of ISRU techniques. The aim of this research is the analysis of a Moon outpost dedicated to the validation of enabling technologies for human space exploration. The main building blocks of the outpost are identified and feasible evolutionary scenarios are depicted, to highlight the incremental steps to build up the outpost. Main aspects that are dealt with include outpost location and architecture, as well as ISRU facilities, which in a far term future can help reduce the mass at launch, by producing hydrogen and oxygen for consumables, ECLSS, and propellant for Earth-Moon sorties and Mars journeys. A test outpost is implemented in a Virtual Reality (VR) environment as a first proof-of-concepts, where the elements are computer-based mock-ups. The VR facility has a first-person interactive perspective, allowing for specific in-depth analyses of ergonomics and operations. The feedbacks of these analyses are crucial to highlight requirements that might otherwise be overlooked, while their general outputs are fundamental to write down procedures. Moreover, the mimic of astronauts' EVAs is useful for pre-flight training, but can also represent an additional tool for failures troubleshooting

  5. Using Vision System Technologies to Enable Operational Improvements for Low Visibility Approach and Landing Operations

    Science.gov (United States)

    Kramer, Lynda J.; Ellis, Kyle K. E.; Bailey, Randall E.; Williams, Steven P.; Severance, Kurt; Le Vie, Lisa R.; Comstock, James R.

    2014-01-01

    Flight deck-based vision systems, such as Synthetic and Enhanced Vision System (SEVS) technologies, have the potential to provide additional margins of safety for aircrew performance and enable the implementation of operational improvements for low visibility surface, arrival, and departure operations in the terminal environment with equivalent efficiency to visual operations. To achieve this potential, research is required for effective technology development and implementation based upon human factors design and regulatory guidance. This research supports the introduction and use of Synthetic Vision Systems and Enhanced Flight Vision Systems (SVS/EFVS) as advanced cockpit vision technologies in Next Generation Air Transportation System (NextGen) operations. Twelve air transport-rated crews participated in a motion-base simulation experiment to evaluate the use of SVS/EFVS in NextGen low visibility approach and landing operations. Three monochromatic, collimated head-up display (HUD) concepts (conventional HUD, SVS HUD, and EFVS HUD) and two color head-down primary flight display (PFD) concepts (conventional PFD, SVS PFD) were evaluated in a simulated NextGen Chicago O'Hare terminal environment. Additionally, the instrument approach type (no offset, 3 degree offset, 15 degree offset) was experimentally varied to test the efficacy of the HUD concepts for offset approach operations. The data showed that touchdown landing performance were excellent regardless of SEVS concept or type of offset instrument approach being flown. Subjective assessments of mental workload and situation awareness indicated that making offset approaches in low visibility conditions with an EFVS HUD or SVS HUD may be feasible.

  6. Technological Criteria Technology-Environmental under a Systemic Approach: Chemistry Technology Transfer

    Directory of Open Access Journals (Sweden)

    Durán-García Martín Enrique

    2014-07-01

    Full Text Available Currently the transfer of chemical technology is a process that contributes to the technology policy of a country, an industry or an organization in general chemistry. This process requires the application of clear criteria for the proper development of the complex interrelations in the transfer of chemical technology. A group of criteria that are present, are those related to environmental technology which intrinsically define the technology and its impact to the environment. Therefore, the transfer of chemical technology requires technological-environmental criteria defining, in conjunction with other criteria, an adequate process for the selection, acquisition and incorporation of technology in a holistic perspective, so it provides feasible solutions the chemical industry in pursuit of their goals. Then the criterion becomes a benchmark for assessing an appropriate technology transfer process. We performed a theoretical analysis of the technological and environmental criteria, proposing thirty-six (36 technological-environmental criteria interrelated under a systemic approach in the process of transfer of chemical technology, focused on a methodological cycle first run, based primarily on the research-action method. Future research is expected to make a refinement of the criteria from the formulation and validation of metrics so that necessary adjustments are made to optimize the process of transfer of chemical technology.

  7. A methodology to enable rapid evaluation of aviation environmental impacts and aircraft technologies

    Science.gov (United States)

    Becker, Keith Frederick

    Commercial aviation has become an integral part of modern society and enables unprecedented global connectivity by increasing rapid business, cultural, and personal connectivity. In the decades following World War II, passenger travel through commercial aviation quickly grew at a rate of roughly 8% per year globally. The FAA's most recent Terminal Area Forecast predicts growth to continue at a rate of 2.5% domestically, and the market outlooks produced by Airbus and Boeing generally predict growth to continue at a rate of 5% per year globally over the next several decades, which translates into a need for up to 30,000 new aircraft produced by 2025. With such large numbers of new aircraft potentially entering service, any negative consequences of commercial aviation must undergo examination and mitigation by governing bodies so that growth may still be achieved. Options to simultaneously grow while reducing environmental impact include evolution of the commercial fleet through changes in operations, aircraft mix, and technology adoption. Methods to rapidly evaluate fleet environmental metrics are needed to enable decision makers to quickly compare the impact of different scenarios and weigh the impact of multiple policy options. As the fleet evolves, interdependencies may emerge in the form of tradeoffs between improvements in different environmental metrics as new technologies are brought into service. In order to include the impacts of these interdependencies on fleet evolution, physics-based modeling is required at the appropriate level of fidelity. Evaluation of environmental metrics in a physics-based manner can be done at the individual aircraft level, but will then not capture aggregate fleet metrics. Contrastingly, evaluation of environmental metrics at the fleet level is already being done for aircraft in the commercial fleet, but current tools and approaches require enhancement because they currently capture technology implementation through post

  8. Technology-enabled assessment of health professions education: consensus statement and recommendations from the Ottawa 2010 Conference

    DEFF Research Database (Denmark)

    Amin, Zubair; Boulet, John R; Cook, David A

    2011-01-01

    The uptake of information and communication technologies (ICTs) in health professions education can have far-reaching consequences on assessment. The medical education community still needs to develop a deeper understanding of how technology can underpin and extend assessment practices....... This article was developed by the 2010 Ottawa Conference Consensus Group on technology-enabled assessment to guide practitioners and researchers working in this area. This article highlights the changing nature of ICTs in assessment, the importance of aligning technology-enabled assessment with local context...... and needs, the need for better evidence to support use of technologies in health profession education assessment, and a number of challenges, particularly validity threats, that need to be addressed while incorporating technology in assessment. Our recommendations are intended for all practitioners across...

  9. SENSE IT: Student Enabled Network of Sensors for the Environment using Innovative Technology

    Science.gov (United States)

    Hotaling, L. A.; Stolkin, R.; Kirkey, W.; Bonner, J. S.; Lowes, S.; Lin, P.; Ojo, T.

    2010-12-01

    SENSE IT is a project funded by the National Science Foundation (NSF) which strives to enrich science, technology, engineering and mathematics (STEM) education by providing teacher professional development and classroom projects in which high school students build from first principles, program, test and deploy sensors for water quality monitoring. Sensor development is a broad and interdisciplinary area, providing motivating scenarios in which to teach a multitude of STEM subjects, from mathematics and physics to biology and environmental science, while engaging students with hands on problems that reinforce conventional classroom learning by re-presenting theory as practical tools for building real-life working devices. The SENSE IT program is currently developing and implementing a set of high school educational modules which teach environmental science and basic engineering through the lens of fundamental STEM principles, at the same time introducing students to a new set of technologies that are increasingly important in the world of environmental research. Specifically, the project provides students with the opportunity to learn the engineering design process through the design, construction, programming and testing of a student-implemented water monitoring network in the Hudson and St. Lawrence Rivers in New York. These educational modules are aligned to state and national technology and science content standards and are designed to be compatible with standard classroom curricula to support a variety of core science, technology and mathematics classroom material. For example, while designing, programming and calibrating the sensors, the students are led through a series of tasks in which they must use core mathematics and physics theory to solve the real problems of making their sensors work. In later modules, students can explore environmental science and environmental engineering curricula while deploying and monitoring their sensors in local rivers. This

  10. Evaluating Complex Interventions and Health Technologies Using Normalization Process Theory: Development of a Simplified Approach and Web-Enabled Toolkit

    LENUS (Irish Health Repository)

    May, Carl R

    2011-09-30

    Abstract Background Normalization Process Theory (NPT) can be used to explain implementation processes in health care relating to new technologies and complex interventions. This paper describes the processes by which we developed a simplified version of NPT for use by clinicians, managers, and policy makers, and which could be embedded in a web-enabled toolkit and on-line users manual. Methods Between 2006 and 2010 we undertook four tasks. (i) We presented NPT to potential and actual users in multiple workshops, seminars, and presentations. (ii) Using what we discovered from these meetings, we decided to create a simplified set of statements and explanations expressing core constructs of the theory (iii) We circulated these statements to a criterion sample of 60 researchers, clinicians and others, using SurveyMonkey to collect qualitative textual data about their criticisms of the statements. (iv) We then reconstructed the statements and explanations to meet users\\' criticisms, embedded them in a web-enabled toolkit, and beta tested this \\'in the wild\\'. Results On-line data collection was effective: over a four week period 50\\/60 participants responded using SurveyMonkey (40\\/60) or direct phone and email contact (10\\/60). An additional nine responses were received from people who had been sent the SurveyMonkey form by other respondents. Beta testing of the web enabled toolkit produced 13 responses, from 327 visits to http:\\/\\/www.normalizationprocess.org. Qualitative analysis of both sets of responses showed a high level of support for the statements but also showed that some statements poorly expressed their underlying constructs or overlapped with others. These were rewritten to take account of users\\' criticisms and then embedded in a web-enabled toolkit. As a result we were able translate the core constructs into a simplified set of statements that could be utilized by non-experts. Conclusion Normalization Process Theory has been developed through

  11. Evaluating complex interventions and health technologies using normalization process theory: development of a simplified approach and web-enabled toolkit

    Directory of Open Access Journals (Sweden)

    Murray Elizabeth

    2011-09-01

    Full Text Available Abstract Background Normalization Process Theory (NPT can be used to explain implementation processes in health care relating to new technologies and complex interventions. This paper describes the processes by which we developed a simplified version of NPT for use by clinicians, managers, and policy makers, and which could be embedded in a web-enabled toolkit and on-line users manual. Methods Between 2006 and 2010 we undertook four tasks. (i We presented NPT to potential and actual users in multiple workshops, seminars, and presentations. (ii Using what we discovered from these meetings, we decided to create a simplified set of statements and explanations expressing core constructs of the theory (iii We circulated these statements to a criterion sample of 60 researchers, clinicians and others, using SurveyMonkey to collect qualitative textual data about their criticisms of the statements. (iv We then reconstructed the statements and explanations to meet users' criticisms, embedded them in a web-enabled toolkit, and beta tested this 'in the wild'. Results On-line data collection was effective: over a four week period 50/60 participants responded using SurveyMonkey (40/60 or direct phone and email contact (10/60. An additional nine responses were received from people who had been sent the SurveyMonkey form by other respondents. Beta testing of the web enabled toolkit produced 13 responses, from 327 visits to http://www.normalizationprocess.org. Qualitative analysis of both sets of responses showed a high level of support for the statements but also showed that some statements poorly expressed their underlying constructs or overlapped with others. These were rewritten to take account of users' criticisms and then embedded in a web-enabled toolkit. As a result we were able translate the core constructs into a simplified set of statements that could be utilized by non-experts. Conclusion Normalization Process Theory has been developed through

  12. The ``Micro'' Aethalometer - an enabling technology for new applications in the measurement of Aerosol Black Carbon

    Science.gov (United States)

    Hansen, A. D.; Močnik, G.

    2010-12-01

    Aerosol Black Carbon (BC) is a tracer for combustion emissions; a primary indicator of adverse health effects; and the second leading contributor to Global Climate Change. The “Micro” Aethalometer is a recently-developed miniature instrument that makes a real-time measurement of BC on a very short timebase in a self-contained, battery-powered package that is lightweight and pocket sized. This technological development critically enables new areas of research: Measurements of the vertical profile of BC, by carrying the sampler aloft on a balloon (tethered or released) or aircraft (piloted or UAV); Estimates of the concentration of BC in the troposphere and lower stratosphere in the 8 - 12 km. altitude range, by measurements in the passenger cabin during commercial air travel; Epidemiological studies of personal exposure to BC, by carrying the sampler on a subject person in health studies; Measurements of the concentration of BC in rural and remote regions, by means of a small, battery-powered instrument that is convenient to deploy; measurements of high concentrations of “smoke” in indoor and outdoor environments in developing countries; Unobtrusive monitoring of BC infiltration into indoor environments, by means of a small, quiet instrument that can be placed in publicly-used spaces, school classrooms, museums, and other potentially-impacted locations; Adaptation of the technology to the direct source measurement of BC concentrations in emissions from diesel exhausts, combustion plumes, and other sources. We will show examples of data from various recent projects to illustrate the capabilities and applications of this new instrument.

  13. Global biosurveillance: enabling science and technology. Workshop background and motivation: international scientific engagement for global security

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Helen H [Los Alamos National Laboratory

    2011-01-18

    Through discussion the conference aims to: (1) Identify core components of a comprehensive global biosurveillance capability; (2) Determine the scientific and technical bases to support such a program; (3) Explore the improvement in biosurveillance to enhance regional and global disease outbreak prediction; (4) Recommend an engagement approach to establishing an effective international community and regional or global network; (5) Propose implementation strategies and the measures of effectiveness; and (6) Identify the challenges that must be overcome in the next 3-5 years in order to establish an initial global biosurveillance capability that will have significant positive impact on BioNP as well as public health and/or agriculture. There is also a look back at the First Biothreat Nonproliferation Conference from December 2007. Whereas the first conference was an opportunity for problem solving to enhance and identify new paradigms for biothreat nonproliferation, this conference is moving towards integrated comprehensive global biosurveillance. Main reasons for global biosurveillance are: (1) Rapid assessment of unusual disease outbreak; (2) Early warning of emerging, re-emerging and engineered biothreat enabling reduced morbidity and mortality; (3) Enhanced crop and livestock management; (4) Increase understanding of host-pathogen interactions and epidemiology; (5) Enhanced international transparency for infectious disease research supporting BWC goals; and (6) Greater sharing of technology and knowledge to improve global health.

  14. Some Recent Technology Developments From The Uk's National Nuclear Laboratory To Enable Hazard Characterisation For Nuclear Decommissioning Applications

    International Nuclear Information System (INIS)

    Farfan, E.; Foley, T.

    2010-01-01

    Under its programme of self investment Internal Research and Development (IR and D), the UK's National Nuclear Laboratory (NNL) is addressing the requirement for development in technology to enable hazard characterisation for nuclear decommissioning applications. Three such examples are described here: (1) RadBall developed by the NNL (patent pending) is a deployable baseball-sized radiation mapping device which can, from a single location, locate and quantify radiation hazards. RadBall offers a means to collect information regarding the magnitude and distribution of radiation in a given cell, glovebox or room to support the development of a safe, cost effective decontamination strategy. RadBall requires no electrical supplies and is relatively small, making it easy to be deployed and used to map radiation hazards in hard to reach areas. Recent work conducted in partnership with the Savannah River National Laboratory (SRNL) is presented. (2) HiRAD (patent pending) has been developed by the NNL in partnership with Tracerco Ltd (UK). HiRAD is a real-time, remotely deployed, radiation detection device designed to operate in elevated levels of radiation (i.e. thousands and tens of thousands of Gray) as seen in parts of the nuclear industry. Like the RadBall technology, the HiRAD system does not require any electrical components, the small dimensions and flexibility of the device allow it to be positioned in difficult to access areas (such as pipe work). HiRAD can be deployed as a single detector, a chain, or as an array giving the ability to monitor large process areas. Results during the development and deployment of the technology are presented. (3) Wireless Sensor Network is a NNL supported development project led by the University of Manchester (UK) in partnership with Oxford University (UK). The project is concerned with the development of wireless sensor network technology to enable the underwater deployment and communication of miniaturised probes allowing pond

  15. Energy management under policy and technology uncertainty

    International Nuclear Information System (INIS)

    Tylock, Steven M.; Seager, Thomas P.; Snell, Jeff; Bennett, Erin R.; Sweet, Don

    2012-01-01

    Energy managers in public agencies are subject to multiple and sometimes conflicting policy objectives regarding cost, environmental, and security concerns associated with alternative energy technologies. Making infrastructure investment decisions requires balancing different distributions of risks and benefits that are far from clear. For example, managers at permanent Army installations must incorporate Congressional legislative objectives, executive orders, Department of Defense directives, state laws and regulations, local restrictions, and multiple stakeholder concerns when undertaking new energy initiatives. Moreover, uncertainty with regard to alternative energy technologies is typically much greater than that associated with traditional technologies, both because the technologies themselves are continuously evolving and because the intermittent nature of many renewable technologies makes a certain level of uncertainty irreducible. This paper describes a novel stochastic multi-attribute analytic approach that allows users to explore different priorities or weighting schemes in combination with uncertainties related to technology performance. To illustrate the utility of this approach for understanding conflicting policy or stakeholder perspectives, prioritizing the need for more information, and making investment decisions, we apply this approach to an energy technology decision problem representative of a permanent military base. Highlights: ► Incorporate disparate criteria with uncertain performance. ► Analyze decisions with contrasting stakeholder positions. ► Interactively compare alternatives based on uncertain weighting. ► User friendly multi-criteria decision analysis (MCDA) tool.

  16. 4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials.

    Science.gov (United States)

    Li, Yi-Chen; Zhang, Yu Shrike; Akpek, Ali; Shin, Su Ryon; Khademhosseini, Ali

    2016-12-02

    Four-dimensional (4D) bioprinting, encompassing a wide range of disciplines including bioengineering, materials science, chemistry, and computer sciences, is emerging as the next-generation biofabrication technology. By utilizing stimuli-responsive materials and advanced three-dimensional (3D) bioprinting strategies, 4D bioprinting aims to create dynamic 3D patterned biological structures that can transform their shapes or behavior under various stimuli. In this review, we highlight the potential use of various stimuli-responsive materials for 4D printing and their extension into biofabrication. We first discuss the state of the art and limitations associated with current 3D printing modalities and their transition into the inclusion of the additional time dimension. We then suggest the potential use of different stimuli-responsive biomaterials as the bioink that may achieve 4D bioprinting where transformation of fabricated biological constructs can be realized. We finally conclude with future perspectives.

  17. Digital Technologies for Social Innovation: An Empirical Recognition on the New Enablers

    Directory of Open Access Journals (Sweden)

    Riccardo Maiolini

    2016-12-01

    Full Text Available Even though scholars’ attention has been placed on Social Innovation (SI, little evidence has been provided with regards to which tools are actually used to address social needs and foster Social Innovation initiatives. The purpose of the article is twofold. Firstly, the article offers empirical recognition to SI by investigating, on a large-scale, social and innovative activities conducted by start-ups and small and medium-sized enterprises (SMEs across the world between 2001 and 2014. Secondly, the article intends to capture SI core businesses and underlying complementarities between products, markets, and technologies and show in which way digital media and IT are essentially tracing innovation trajectories over a multitude of industries, leading the current industrial patterns of SI, and continually fostering its cross-industry nature.

  18. Evaluating the limits of solar photovoltaics (PV) in electric power systems utilizing energy storage and other enabling technologies

    International Nuclear Information System (INIS)

    Denholm, Paul; Margolis, Robert M.

    2007-01-01

    In this work, we evaluate technologies that will enable solar photovoltaics (PV) to overcome the limits of traditional electric power systems. We performed simulations of a large utility system using hourly solar insolation and load data and attempted to provide up to 50% of this system's energy from PV. We considered several methods to avoid the limits of unusable PV that result at high penetration due to the use of inflexible baseload generators. The enabling technologies considered in this work are increased system flexibility, load shifting via demand responsive appliances, and energy storage

  19. Using Enabling Technologies to Advance Data Intensive Analysis Tools in the JPL Tropical Cyclone Information System

    Science.gov (United States)

    Knosp, B.; Gangl, M. E.; Hristova-Veleva, S. M.; Kim, R. M.; Lambrigtsen, B.; Li, P.; Niamsuwan, N.; Shen, T. P. J.; Turk, F. J.; Vu, Q. A.

    2014-12-01

    Automated Rotational Center Hurricane Eye Retrieval (ARCHER) tools. In this presentation, we will compare the enabling technologies we tested and discuss which ones we selected for integration into the TCIS' data analysis tool architecture. We will also show how these techniques have been automated to provide access to NRT data through our analysis tools.

  20. Atomic layer deposition: an enabling technology for the growth of functional nanoscale semiconductors

    Science.gov (United States)

    Biyikli, Necmi; Haider, Ali

    2017-09-01

    In this paper, we present the progress in the growth of nanoscale semiconductors grown via atomic layer deposition (ALD). After the adoption by semiconductor chip industry, ALD became a widespread tool to grow functional films and conformal ultra-thin coatings for various applications. Based on self-limiting and ligand-exchange-based surface reactions, ALD enabled the low-temperature growth of nanoscale dielectric, metal, and semiconductor materials. Being able to deposit wafer-scale uniform semiconductor films at relatively low-temperatures, with sub-monolayer thickness control and ultimate conformality, makes ALD attractive for semiconductor device applications. Towards this end, precursors and low-temperature growth recipes are developed to deposit crystalline thin films for compound and elemental semiconductors. Conventional thermal ALD as well as plasma-assisted and radical-enhanced techniques have been exploited to achieve device-compatible film quality. Metal-oxides, III-nitrides, sulfides, and selenides are among the most popular semiconductor material families studied via ALD technology. Besides thin films, ALD can grow nanostructured semiconductors as well using either template-assisted growth methods or bottom-up controlled nucleation mechanisms. Among the demonstrated semiconductor nanostructures are nanoparticles, nano/quantum-dots, nanowires, nanotubes, nanofibers, nanopillars, hollow and core-shell versions of the afore-mentioned nanostructures, and 2D materials including transition metal dichalcogenides and graphene. ALD-grown nanoscale semiconductor materials find applications in a vast amount of applications including functional coatings, catalysis and photocatalysis, renewable energy conversion and storage, chemical sensing, opto-electronics, and flexible electronics. In this review, we give an overview of the current state-of-the-art in ALD-based nanoscale semiconductor research including the already demonstrated and future applications.

  1. Emerging Therapeutic Enhancement Enabling Health Technologies and Their Discourses: What Is Discussed within the Health Domain?

    Science.gov (United States)

    Wolbring, Gregor; Diep, Lucy; Yumakulov, Sophya; Ball, Natalie; Leopatra, Verlyn; Yergens, Dean

    2013-01-01

    So far, the very meaning of health and therefore, treatment and rehabilitation is benchmarked to the normal or species-typical body. We expect certain abilities in members of a species; we expect humans to walk but not to fly, but a bird we expect to fly. However, increasingly therapeutic interventions have the potential to give recipients beyond species-typical body related abilities (therapeutic enhancements, TE). We believe that the perfect storm of TE, the shift in ability expectations toward beyond species-typical body abilities, and the increasing desire of health consumers to shape the health system will increasingly influence various aspects of health care practice, policy, and scholarship. We employed qualitative and quantitative methods to investigate among others how human enhancement, neuro/cognitive enhancement, brain machine interfaces, and social robot discourses cover (a) healthcare, healthcare policy, and healthcare ethics, (b) disability and (c) health consumers and how visible various assessment fields are within Neuro/Cogno/Human enhancement and within the BMI and social robotics discourse. We found that health care, as such, is little discussed, as are health care policy and ethics; that the term consumers (but not health consumers) is used; that technology, impact and needs assessment is absent; and that the imagery of disabled people is primarily a medical one. We submit that now, at this early stage, is the time to gain a good understanding of what drives the push for the enhancement agenda and enhancement-enabling devices, and the dynamics around acceptance and diffusion of therapeutic enhancements. PMID:27429129

  2. Emerging Therapeutic Enhancement Enabling Health Technologies and Their Discourses: What Is Discussed within the Health Domain?

    Directory of Open Access Journals (Sweden)

    Gregor Wolbring

    2013-07-01

    Full Text Available So far, the very meaning of health and therefore, treatment and rehabilitation is benchmarked to the normal or species-typical body. We expect certain abilities in members of a species; we expect humans to walk but not to fly, but a bird we expect to fly. However, increasingly therapeutic interventions have the potential to give recipients beyond species-typical body related abilities (therapeutic enhancements, TE. We believe that the perfect storm of TE, the shift in ability expectations toward beyond species-typical body abilities, and the increasing desire of health consumers to shape the health system will increasingly influence various aspects of health care practice, policy, and scholarship. We employed qualitative and quantitative methods to investigate among others how human enhancement, neuro/cognitive enhancement, brain machine interfaces, and social robot discourses cover (a healthcare, healthcare policy, and healthcare ethics, (b disability and (c health consumers and how visible various assessment fields are within Neuro/Cogno/ Human enhancement and within the BMI and social robotics discourse. We found that health care, as such, is little discussed, as are health care policy and ethics; that the term consumers (but not health consumers is used; that technology, impact and needs assessment is absent; and that the imagery of disabled people is primarily a medical one. We submit that now, at this early stage, is the time to gain a good understanding of what drives the push for the enhancement agenda and enhancement-enabling devices, and the dynamics around acceptance and diffusion of therapeutic enhancements.

  3. Enabling Remote Activity: Using mobile technology for remote participation in geoscience fieldwork

    Science.gov (United States)

    Davies, Sarah; Collins, Trevor; Gaved, Mark; Bartlett, Jessica; Valentine, Chris; McCann, Lewis

    2010-05-01

    Field-based activities are regarded as essential to the development of a range of professional and personal skills within the geosciences. Students enjoy field activities, preferring these to learning with simulations (Spicer and Stratford 2001), and these improve deeper learning and understanding (Kern and Carpenter, 1984; Elkins and Elkins, 2007). However, some students find it difficult to access these field-based learning opportunities. Field sites may be remote and often require travel across uneven, challenging or potentially dangerous terrain. Mobility-impaired students are particularly limited in their opportunities to participate in field-based learning activities and, as higher education institutions have a responsibility to provide inclusive opportunities for students (UK Disability Discrimination Act 1995, UK Special Education Needs and Disability Rights Act 2001), the need for inclusive fieldwork learning is being increasingly recognised. The Enabling Remote Activity (ERA) project has been investigating how mobile communications technologies might allow field learning experiences to be brought to students who would otherwise find it difficult to participate, and also to enhance activities for all participants. It uses a rapidly deployable, battery-powered wireless network to transmit video, audio, and high resolution still images to connect participants at an accessible location with participants in the field. Crucially, the system uses a transient wireless network, allowing multiple locations to be explored during a field visit, and for plans to be changed dynamically if required. Central to the concept is the requirement for independent investigative learning: students are enabled to participate actively in the learning experience and to direct the investigations, as opposed to being simply remote viewers of the experience. Two ways of using the ERA system have been investigated: remote access and collaborative groupwork. In 2006 and 2008 remote

  4. Self-management support interventions that are clinically linked and technology enabled: can they successfully prevent and treat diabetes?

    Science.gov (United States)

    Kaufman, Neal D; Woodley, Paula D Patnoe

    2011-05-01

    Patients with diabetes need a complex set of services and supports. The challenge of integrating these services into the diabetes regimen can be successfully overcome through self-management support interventions that are clinically linked and technology enabled: self-management support because patients need help mastering the knowledge, attitudes, skills, and behaviors so necessary for good outcomes; interventions because comprehensive theory-based, evidence-proven, long-term, longitudinal interventions work better than direct-to-consumer or nonplanned health promotion approaches; clinically linked because patients are more likely to adopt new behaviors when the approach is in the context of a trusted therapeutic relationship and within an effective medical care system; and technology enabled because capitalizing on the amazing power of information technology leads to the delivery of cost-effective, scalable, engaging solutions that prevent and manage diabetes. © 2011 Diabetes Technology Society.

  5. Free and open source enabling technologies for patient-centric, guideline-based clinical decision support: a survey.

    Science.gov (United States)

    Leong, T Y; Kaiser, K; Miksch, S

    2007-01-01

    Guideline-based clinical decision support is an emerging paradigm to help reduce error, lower cost, and improve quality in evidence-based medicine. The free and open source (FOS) approach is a promising alternative for delivering cost-effective information technology (IT) solutions in health care. In this paper, we survey the current FOS enabling technologies for patient-centric, guideline-based care, and discuss the current trends and future directions of their role in clinical decision support. We searched PubMed, major biomedical informatics websites, and the web in general for papers and links related to FOS health care IT systems. We also relied on our background and knowledge for specific subtopics. We focused on the functionalities of guideline modeling tools, and briefly examined the supporting technologies for terminology, data exchange and electronic health record (EHR) standards. To effectively support patient-centric, guideline-based care, the computerized guidelines and protocols need to be integrated with existing clinical information systems or EHRs. Technologies that enable such integration should be accessible, interoperable, and scalable. A plethora of FOS tools and techniques for supporting different knowledge management and quality assurance tasks involved are available. Many challenges, however, remain in their implementation. There are active and growing trends of deploying FOS enabling technologies for integrating clinical guidelines, protocols, and pathways into the main care processes. The continuing development and maturation of such technologies are likely to make increasingly significant contributions to patient-centric, guideline-based clinical decision support.

  6. Developments in remote sensing technology enable more detailed urban flood risk analysis.

    Science.gov (United States)

    Denniss, A.; Tewkesbury, A.

    2009-04-01

    Spaceborne remote sensors have been allowing us to build up a profile of planet earth for many years. With each new satellite launched we see the capabilities improve: new bands of data, higher resolution imagery, the ability to derive better elevation information. The combination of this geospatial data to create land cover and usage maps, all help inform catastrophe modelling systems. From Landsat 30m resolution to 2.44m QuickBird multispectral imagery; from 1m radar data collected by TerraSAR-X which enables rapid tracking of the rise and fall of a flood event, and will shortly have a twin satellite launched enabling elevation data creation; we are spoilt for choice in available data. However, just what is cost effective? It is always a question of choosing the appropriate level of input data detail for modelling, depending on the value of the risk. In the summer of 2007, the cost of the flooding in the UK was approximately £3bn and affected over 58,000 homes and businesses. When it comes to flood risk, we have traditionally considered rising river levels and surge tides, but with climate change and variations in our own construction behaviour, there are other factors to be taken into account. During those summer 2007 events, the Environment Agency suggested that around 70% of the properties damaged were the result of pluvial flooding, where high localised rainfall events overload localised drainage infrastructure, causing widespread flooding of properties and infrastructure. To create a risk model that is able to simulate such an event requires much more accurate source data than can be provided from satellite or radar. As these flood events cause considerable damage within relatively small, complex urban environments, therefore new high resolution remote sensing techniques have to be applied to better model these events. Detailed terrain data of England and Wales, plus cities in Scotland, have been produced by combining terrain measurements from the latest

  7. The Flipped Classroom, Disruptive Pedagogies, Enabling Technologies and Wicked Problems: Responding to "The Bomb in the Basement"

    Science.gov (United States)

    Hutchings, Maggie; Quinney, Anne

    2015-01-01

    The adoption of enabling technologies by universities provides unprecedented opportunities for flipping the classroom to achieve student-centred learning. While higher education policies focus on placing students at the heart of the education process, the propensity for student identities to shift from partners in learning to consumers of…

  8. RFID technology and the EPC network as enablers of mobile business: a case study in a retail supply chain

    NARCIS (Netherlands)

    Wamba, S.F.; Bendavid, Y.; Lefebvre, L.A.; Lefebvre, E.

    2006-01-01

    The main objective of this study is to explore the impact of integrating Radio Frequency Identification (RFID) technology and the Electronic Product Code (EPC) network into one specific supply chain in the retail industry and investigate their potentials as enablers of Mobile Business (m-business).

  9. Design and Implementation of Technology Enabled Affective Learning Using Fusion of Bio-Physical and Facial Expression

    Science.gov (United States)

    Ray, Arindam; Chakrabarti, Amlan

    2016-01-01

    Technology Enabled Learning is a cognitive, constructive, systematic, collaborative learning procedure, which transforms teaching-learning pedagogy where role of emotion is very often neglected. Emotion plays significant role in the cognitive process of human being, so the transformation is incomplete without capturing the learner's emotional…

  10. ArrayWiki: an enabling technology for sharing public microarray data repositories and meta-analyses

    Science.gov (United States)

    Stokes, Todd H; Torrance, JT; Li, Henry; Wang, May D

    2008-01-01

    Background A survey of microarray databases reveals that most of the repository contents and data models are heterogeneous (i.e., data obtained from different chip manufacturers), and that the repositories provide only basic biological keywords linking to PubMed. As a result, it is difficult to find datasets using research context or analysis parameters information beyond a few keywords. For example, to reduce the "curse-of-dimension" problem in microarray analysis, the number of samples is often increased by merging array data from different datasets. Knowing chip data parameters such as pre-processing steps (e.g., normalization, artefact removal, etc), and knowing any previous biological validation of the dataset is essential due to the heterogeneity of the data. However, most of the microarray repositories do not have meta-data information in the first place, and do not have a a mechanism to add or insert this information. Thus, there is a critical need to create "intelligent" microarray repositories that (1) enable update of meta-data with the raw array data, and (2) provide standardized archiving protocols to minimize bias from the raw data sources. Results To address the problems discussed, we have developed a community maintained system called ArrayWiki that unites disparate meta-data of microarray meta-experiments from multiple primary sources with four key features. First, ArrayWiki provides a user-friendly knowledge management interface in addition to a programmable interface using standards developed by Wikipedia. Second, ArrayWiki includes automated quality control processes (caCORRECT) and novel visualization methods (BioPNG, Gel Plots), which provide extra information about data quality unavailable in other microarray repositories. Third, it provides a user-curation capability through the familiar Wiki interface. Fourth, ArrayWiki provides users with simple text-based searches across all experiment meta-data, and exposes data to search engine crawlers

  11. Enabling Technology for Thermal Protection on HIAD and Other Hypersonic Missions, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — S. D. Miller and Associates proposes to investigate a new class of thermal insulations that will enable thermal protection systems (TPS) on ceramic matrix composite...

  12. Maintenance and replacement policies under technological obsolescence

    International Nuclear Information System (INIS)

    Clavareau, Julien; Labeau, Pierre-Etienne

    2009-01-01

    The technological obsolescence of a unit is characterized by the existence of challenger units displaying identical functionalities, but with higher performances. This paper aims to define and model in a realistic way, possible maintenance policies of a system including replacement strategies when one type of challenger unit is available. The comparison of these possible strategies is performed based on a Monte Carlo estimation of the costs they incur

  13. Maintenance and replacement policies under technological obsolescence

    Energy Technology Data Exchange (ETDEWEB)

    Clavareau, Julien [Service de Metrologie Nucleaire, Universite Libre de Bruxelles, Av. Franklin Roosevelt 50, CP165/84 Bruxelles B-1050 (Belgium)], E-mail: jclavare@ulb.ac.be; Labeau, Pierre-Etienne [Service de Metrologie Nucleaire, Universite Libre de Bruxelles, Av. Franklin Roosevelt 50, CP165/84 Bruxelles B-1050 (Belgium)], E-mail: pelabeau@ulb.ac.be

    2009-02-15

    The technological obsolescence of a unit is characterized by the existence of challenger units displaying identical functionalities, but with higher performances. This paper aims to define and model in a realistic way, possible maintenance policies of a system including replacement strategies when one type of challenger unit is available. The comparison of these possible strategies is performed based on a Monte Carlo estimation of the costs they incur.

  14. Phasic deactivation of the medial temporal lobe enables working memory processing under stress

    NARCIS (Netherlands)

    Cousijn, Helena; Rijpkema, Mark; Qin, Shaozheng; van Wingen, Guido A.; Fernández, Guillén

    2012-01-01

    Demanding cognitive tasks are sometimes carried out under stressful conditions. Several studies indicate that whereas severe stress impairs performance, moderate stress can enhance cognitive performance. In this study, we investigated how moderate stress influences the neural systems supporting

  15. 78 FR 53026 - Regulations Enabling Elections for Certain Transaction Under Section 336(e); Correction

    Science.gov (United States)

    2013-08-28

    ... Code (CODE), which authorizes the issuance of regulations under which an election may be made to treat sale, exchange or distribution of at least 80 percent of the voting power and value of the stock of a...

  16. Emerging issues and current trends in assistive technology use 2007-2010: practising, assisting and enabling learning for all.

    Science.gov (United States)

    Abbott, Chris; Brown, David; Evett, Lindsay; Standen, Penny

    2014-11-01

    Following an earlier review in 2007, a further review of the academic literature relating to the uses of assistive technology (AT) by children and young people was completed, covering the period 2007-2011. As in the earlier review, a tripartite taxonomy: technology uses to train or practise, technology uses to assist learning and technology uses to enable learning, was used in order to structure the findings. The key markers for research in this field and during these three years were user involvement, AT on mobile mainstream devices, the visibility of AT, technology for interaction and collaboration, new and developing interfaces and inclusive design principles. The paper concludes by locating these developments within the broader framework of the Digital Divide.

  17. Enabling technologies to improve area-wide integrated pest management programmes for the control of screwworms.

    Science.gov (United States)

    Robinson, A S; Vreysen, M J B; Hendrichs, J; Feldmann, U

    2009-06-01

    . Wohlfahrtia magnifica (Schiner) (Diptera: Sarcophagidae) is a screwworm of temperate regions, which, although of limited agricultural importance, has invaded several new locations in the past few years. This special issue reports on the results of a 6-year project funded by the Joint Food and Agriculture Organization of the United Nations/International Atomic Energy Agency (FAO/IAEA) Programme of Nuclear Techniques in Food and Agriculture entitled 'Enabling Technologies for the Expansion of the SIT for Old and New World Screwworm'. A major goal of the project was to better understand population genetic variation in screwworms as an aid to the identification of isolated populations. The project also addressed issues related to genetic sexing, cuticular hydrocarbons, population dynamics, genetic transformation and chromosome analysis.

  18. Sustained Manned Mars Presence Enabled by E-sail Technology and Asteroid Water Mining

    Science.gov (United States)

    Janhunen, Pekka; Merikallio, Sini; Toivanen, Petri; Envall, M. Jouni

    would be reduced because of intermediate tankings plus opening up the possibility of making the craft reusable for several back and forth trips. The manned spacecraft can be tanked first time at Earth C3, second time in Mars orbit for the return trip, and again in Earth C3 for the next trip if the spacecraft is reusable. When propellant is cheap in Mars orbit, it may also make sense to perform an all-propulsive landing which would make thermal shielding unnecessary. In this case the manned spacecraft would be tanked in Mars orbit two times plus once on the surface per each bidirectional mission. We estimate that the dry mass of cryogenic propellant factories and their associated temporary storage tanks that can process 50 tonnes of water per year is 20 tonnes. By developing the E-sail as enabling technology and by employing asteroid water mining, we think that sustained bidirectional Earth-Mars manned transportation could be created which would asymptotically require no more resources than what running the International Space Station requires today. References [1] Janhunen, P., et. al, Electric solar wind sail: Towards test missions (Invited article), Rev. Sci. Instrum., 81, 111301, 2010. [2] Janhunen, P., A. Quarta and G. Mengali G., Electric solar wind sail mass budget model, Geosci. Instrum. Method. Data Syst., 2, 85-95, 2013.

  19. Enabling CD SEM metrology for 5nm technology node and beyond

    Science.gov (United States)

    Lorusso, Gian Francesco; Ohashi, Takeyoshi; Yamaguchi, Astuko; Inoue, Osamu; Sutani, Takumichi; Horiguchi, Naoto; Bömmels, Jürgen; Wilson, Christopher J.; Briggs, Basoene; Tan, Chi Lim; Raymaekers, Tom; Delhougne, Romain; Van den Bosch, Geert; Di Piazza, Luca; Kar, Gouri Sankar; Furnémont, Arnaud; Fantini, Andrea; Donadio, Gabriele Luca; Souriau, Laurent; Crotti, Davide; Yasin, Farrukh; Appeltans, Raf; Rao, Siddharth; De Simone, Danilo; Rincon Delgadillo, Paulina; Leray, Philippe; Charley, Anne-Laure; Zhou, Daisy; Veloso, Anabela; Collaert, Nadine; Hasumi, Kazuhisa; Koshihara, Shunsuke; Ikota, Masami; Okagawa, Yutaka; Ishimoto, Toru

    2017-03-01

    The CD SEM (Critical Dimension Scanning Electron Microscope) is one of the main tools used to estimate Critical Dimension (CD) in semiconductor manufacturing nowadays, but, as all metrology tools, it will face considerable challenges to keep up with the requirements of the future technology nodes. The root causes of these challenges are not uniquely related to the shrinking CD values, as one might expect, but to the increase in complexity of the devices in terms of morphology and chemical composition as well. In fact, complicated threedimensional device architectures, high aspect ratio features, and wide variety of materials are some of the unavoidable characteristics of the future metrology nodes. This means that, beside an improvement in resolution, it is critical to develop a CD SEM metrology capable of satisfying the specific needs of the devices of the nodes to come, needs that sometimes will have to be addressed through dramatic changes in approach with respect to traditional CD SEM metrology. In this paper, we report on the development of advanced CD SEM metrology at imec on a variety of device platform and processes, for both logic and memories. We discuss newly developed approaches for standard, IIIV, and germanium FinFETs (Fin Field Effect Transistors), for lateral and vertical nanowires (NW), 3D NAND (three-dimensional NAND), STT-MRAM (Spin Transfer Magnetic Torque Random-Access Memory), and ReRAM (Resistive Random Access Memory). Applications for both front-end of line (FEOL) and back-end of line (BEOL) are developed. In terms of process, S/D Epi (Source Drain Epitaxy), SAQP (Self-Aligned Quadruple Patterning), DSA (Dynamic Self-Assembly), and EUVL (Extreme Ultraviolet Lithography) have been used. The work reported here has been performed on Hitachi CG5000, CG6300, and CV5000. In terms of logic, we discuss here the S/D epi defect classification, the metrology optimization for STI (Shallow Trench Isolation) Ge FinFETs, the defectivity of III-V STI Fin

  20. Robust microscale superlubricity under high contact pressure enabled by graphene-coated microsphere

    Science.gov (United States)

    Liu, Shu-Wei; Wang, Hua-Ping; Xu, Qiang; Ma, Tian-Bao; Yu, Gui; Zhang, Chenhui; Geng, Dechao; Yu, Zhiwei; Zhang, Shengguang; Wang, Wenzhong; Hu, Yuan-Zhong; Wang, Hui; Luo, Jianbin

    2017-02-01

    Superlubricity of graphite and graphene has aroused increasing interest in recent years. Yet how to obtain a long-lasting superlubricity between graphene layers, under high applied normal load in ambient atmosphere still remains a challenge but is highly desirable. Here, we report a direct measurement of sliding friction between graphene and graphene, and graphene and hexagonal boron nitride (h-BN) under high contact pressures by employing graphene-coated microsphere (GMS) probe prepared by metal-catalyst-free chemical vapour deposition. The exceptionally low and robust friction coefficient of 0.003 is accomplished under local asperity contact pressure up to 1 GPa, at arbitrary relative surface rotation angles, which is insensitive to relative humidity up to 51% RH. This ultralow friction is attributed to the sustainable overall incommensurability due to the multi-asperity contact covered with randomly oriented graphene nanograins. This realization of microscale superlubricity can be extended to the sliding between a variety of two-dimensional (2D) layers.

  1. Applications of organic and printed electronics : a technology-enabled revolution

    NARCIS (Netherlands)

    Cantatore, E.

    2013-01-01

    Organic and printed electronics can enable a revolution in the applications of electronics and this book offers readers an overview of the state-of-the-art in this rapidly evolving domain. The potentially low cost, compatibility with flexible substrates and the wealth of devices that characterize

  2. Technology Enabling Ultra High Concentration Multi-Junction Cells. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bedair, S. M.; Colter, Peter

    2016-03-30

    The project goal is to enable multijunction cells to operate at greater than 2000× suns intensity with efficiency above forty percent. To achieve this goal the recipients have developed a robust high-bandgap tunnel junction, reduce series resistance, and integrated a practical heat dissipation scheme.

  3. DOE SciDAC's Earth System Grid Center for Enabling Technologies Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-09-27

    The mission of the Earth System Grid Federation (ESGF) is to provide the worldwide climate-research community with access to the data, information, model codes, analysis tools, and intercomparison capabilities required to make sense of enormous climate data sets. Its specific goals are to (1) provide an easy-to-use and secure web-based data access environment for data sets; (2) add value to individual data sets by presenting them in the context of other data sets and tools for comparative analysis; (3) address the specific requirements of participating organizations with respect to bandwidth, access restrictions, and replication; (4) ensure that the data are readily accessible through the analysis and visualization tools used by the climate research community; and (5) transfer infrastructure advances to other domain areas. For the ESGF, the U.S. Department of Energy's (DOE's) Earth System Grid Center for Enabling Technologies (ESG-CET) team has led international development and delivered a production environment for managing and accessing ultra-scale climate data. This production environment includes multiple national and international climate projects (such as the Community Earth System Model and the Coupled Model Intercomparison Project), ocean model data (such as the Parallel Ocean Program), observation data (Atmospheric Radiation Measurement Best Estimate, Carbon Dioxide Information and Analysis Center, Atmospheric Infrared Sounder, etc.), and analysis and visualization tools, all serving a diverse user community. These data holdings and services are distributed across multiple ESG-CET sites (such as ANL, LANL, LBNL/NERSC, LLNL/PCMDI, NCAR, and ORNL) and at unfunded partner sites, such as the Australian National University National Computational Infrastructure, the British Atmospheric Data Centre, the National Oceanic and Atmospheric Administration Geophysical Fluid Dynamics Laboratory, the Max Planck Institute for Meteorology, the German Climate

  4. Removing Obstacles to the Pedagogical Changes Required by Jonassen's Vision of Authentic Technology-Enabled Learning

    Science.gov (United States)

    Ertmer, Peggy A.; Ottenbreit-Leftwich, Anne

    2013-01-01

    Educators have been striving to achieve meaningful technology use in our K-12 classrooms for over 30 years. Yet, despite significant investments of time and money in infrastructure, training, and support "we have few assurances that [educators] are able to use technology for teaching and learning" (NEA, 2008, p. 1). In this article, we call for a…

  5. Introduction of storage integrated PV systems as an enabling technology for smart energy grids

    NARCIS (Netherlands)

    Ampatzis, M.; Nguyen, H.P.; Kling, W.L.

    2013-01-01

    Merging advanced control and information and communication technology (ICT) technology with the power grid is an appropriate approach for realizing the promising potential of massive distributed energy resources (DERs) integration, that is necessary for the vision of a sustainable society. This

  6. An Amorphous Noble-Metal-Free Electrocatalyst that Enables Nitrogen Fixation under Ambient Conditions.

    Science.gov (United States)

    Lv, Chade; Yan, Chunshuang; Chen, Gang; Ding, Yu; Sun, Jingxue; Zhou, Yansong; Yu, Guihua

    2018-02-23

    N 2 fixation by the electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions is regarded as a potential approach to achieve NH 3 production, which still heavily relies on the Haber-Bosch process at the cost of huge energy and massive production of CO 2 . A noble-metal-free Bi 4 V 2 O 11 /CeO 2 hybrid with an amorphous phase (BVC-A) is used as the cathode for electrocatalytic NRR. The amorphous Bi 4 V 2 O 11 contains significant defects, which play a role as active sites. The CeO 2 not only serves as a trigger to induce the amorphous structure, but also establishes band alignment with Bi 4 V 2 O 11 for rapid interfacial charge transfer. Remarkably, BVC-A shows outstanding electrocatalytic NRR performance with high average yield (NH 3 : 23.21 μg h -1  mg -1 cat. , Faradaic efficiency: 10.16 %) under ambient conditions, which is superior to the Bi 4 V 2 O 11 /CeO 2 hybrid with crystalline phase (BVC-C) counterpart. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Enabling Smart Grid Cosimulation Studies: Rapid Design and Development of the Technologies and Controls

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Timothy M.; Kadavil, Rahul; Palmintier, Bryan; Suryanarayanan, Siddharth; Maciejewski, Anthony A.; Siegel, Howard Jay; Chong, Edwin K. P.; Hale, Elaine

    2016-03-01

    The 21st century electric power grid is transforming with an unprecedented increase in demand and increase in new technologies. In the United States Energy Independence and Security Act of 2007, Title XIII sets the tenets for modernizing the electricity grid through what is known as the 'Smart Grid Initiative.' This initiative calls for increased design, deployment, and integration of distributed energy resources, smart technologies and appliances, and advanced storage devices. The deployment of these new technologies requires rethinking and re-engineering the traditional boundaries between different electric power system domains.

  8. Pathways to Commercial Success: Technologies and Innovations Enabled by the U.S. Department of Energy Fuel Cell Technologies Office

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-10-11

    This report published in October 2017 updates the results of an effort to identify and document the commercial and emerging (projected to be commercialized within the next 3 to 5 years) hydrogen and fuel cell technologies and products that resulted from U.S. Department of Energy support through the Fuel Cell Technologies Office in the Office of Energy Efficiency and Renewable Energy.

  9. Corrugated Two-dimensional Material Enabled Flexoelectricity for Cryogenic Actuator Technology

    Data.gov (United States)

    National Aeronautics and Space Administration — Next generation cryogenic actuator technology (CAT) calls for a wide range of operating temperatures from -296 °C (liquid He) to 116 °C (max on moon surface)....

  10. Emerging technology: A key enabler for modernizing pharmaceutical manufacturing and advancing product quality.

    Science.gov (United States)

    O'Connor, Thomas F; Yu, Lawrence X; Lee, Sau L

    2016-07-25

    Issues in product quality have produced recalls and caused drug shortages in United States (U.S.) in the past few years. These quality issues were often due to outdated manufacturing technologies and equipment as well as lack of an effective quality management system. To ensure consistent supply of safe, effective and high-quality drug products available to the patients, the U.S. Food and Drug Administration (FDA) supports modernizing pharmaceutical manufacturing for improvements in product quality. Specifically, five new initiatives are proposed here to achieve this goal. They include: (i) advancing regulatory science for pharmaceutical manufacturing; (ii) establishing a public-private institute for pharmaceutical manufacturing innovation; (iii) creating incentives for investment in the technological upgrade of manufacturing processes and facilities; (iv) leveraging external expertise for regulatory quality assessment of emerging technologies; and (v) promoting the international harmonization of approaches for expediting the global adoption of emerging technologies. Published by Elsevier B.V.

  11. CMOS technology: a critical enabler for free-form electronics-based killer applications

    KAUST Repository

    Hussain, Muhammad Mustafa; Hussain, Aftab M.; Hanna, Amir

    2016-01-01

    Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today

  12. A qualitative study of the challenges related to the development of product enabled services in technology driven start-ups

    OpenAIRE

    Pedersen, Søren; Tanev, Stoyan; Ma, Zheng; Lin, Chih-Cheng

    2012-01-01

    Product-enabled service development has been identified as one of the potential sources for sustainable growth and competitiveness of firms in advanced economies. Many firms are in the process of shifting their focus from offering standalone products or services towards integrated offerings of products and services to meet specific customer demands, thus generating additional value. This paper examines technology-based start-ups’ attitude towards the development of hybrid offerings as part of...

  13. Current status and future prospects for enabling chemistry technology in the drug discovery process [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Stevan W. Djuric

    2016-09-01

    Full Text Available This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of “dangerous” reagents. Also featured are advances in the “computer-assisted drug design” area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities.

  14. Expedient preparation of nazlinine and a small library of indole alkaloids using flow electrochemistry as an enabling technology.

    Science.gov (United States)

    Kabeshov, Mikhail A; Musio, Biagia; Murray, Philip R D; Browne, Duncan L; Ley, Steven V

    2014-09-05

    An expedient synthesis of the indole alkaloid nazlinine is reported. Judicious choice of flow electrochemistry as an enabling technology has permitted the rapid generation of a small library of unnatural relatives of this biologically active molecule. Furthermore, by conducting the key electrochemical Shono oxidation in a flow cell, the loading of electrolyte can be significantly reduced to 20 mol % while maintaining a stable, broadly applicable process.

  15. Use of Dynamic Technologies for Web-enabled Database Management Systems

    OpenAIRE

    Bogdanova, Galina; Todorov, Todor; Blagoev, Dimitar; Todorova, Mirena

    2007-01-01

    In this paper we consider two computer systems and the dynamic Web technologies they are using. Different contemporary dynamic web technologies are described in details and their advantages and disadvantages have been shown. Specific applications are developed, clinic and studying systems, and their programming models are described. Finally we implement these two applications in the students education process: Online studying has been tested in the Technical University – Va...

  16. Enabling Chemistry Technologies and Parallel Synthesis-Accelerators of Drug Discovery Programmes.

    Science.gov (United States)

    Vasudevan, A; Bogdan, A R; Koolman, H F; Wang, Y; Djuric, S W

    There is a pressing need to improve overall productivity in the pharmaceutical industry. Judicious investments in chemistry technologies can have a significant impact on cycle times, cost of goods and probability of technical success. This perspective describes some of these technologies developed and implemented at AbbVie, and their applications to the synthesis of novel scaffolds and to parallel synthesis. © 2017 Elsevier B.V. All rights reserved.

  17. Up-conversion nanoparticles sensitized inverse opal photonic crystals enable efficient water purification under NIR irradiation

    Science.gov (United States)

    Zhang, Yuanyuan; Wang, Lili; Ma, Xiumei; Ren, Junfeng; Sun, Qinxing; Shi, Yongsheng; Li, Lin; Shi, Jinsheng

    2018-03-01

    A novel porous monolayer inverse opal (IO) structure was prepared by a simple sol-gel method combined with a self-assembly PS photonic crystal (PC) as template. By prolonging deposition time of PS spheres, three-dimensional multilayer TiO2 IOPC was also fabricated. Up-conversion nanoparticles (UCNPs) were selected to sensitize TiO2 IOPCs. Photocatalytic activity of as-prepared materials was investigated by disinfection of bacteria and organic pollutant degradation. Under NIR light irradiation, a large improvement in bacterial inactivation and photodegradation efficiency could be seen for NYF/TiO2 composites in comparison with other samples. As for monolayer NYF/TiO2, water disinfection of 100% inactivation of bacteria is realized within 11 h and kinetic constant of RhB degradation is 0.133 h-1, which is about 10 times higher than that of pure TiO2 IOPCs. Reasons of enhanced photocatalytic activity were systematically investigated and a possible mechanism for NIR-driven photocatalysis was reasonably proposed.

  18. Enabling Spacecraft Formation Flying through Position Determination, Control and Enhanced Automation Technologies

    Science.gov (United States)

    Bristow, John; Bauer, Frank; Hartman, Kate; How, Jonathan

    2000-01-01

    Formation Flying is revolutionizing the way the space community conducts science missions around the Earth and in deep space. This technological revolution will provide new, innovative ways for the community to gather scientific information, share that information between space vehicles and the ground, and expedite the human exploration of space. Once fully matured, formation flying will result in numerous sciencecraft acting as virtual platforms and sensor webs, gathering significantly more and better science data than call be collected today. To achieve this goal, key technologies must be developed including those that address the following basic questions posed by the spacecraft: Where am I? Where is the rest of the fleet? Where do I need to be? What do I have to do (and what am I able to do) to get there? The answers to these questions and the means to implement those answers will depend oil the specific mission needs and formation configuration. However, certain critical technologies are common to most formations. These technologies include high-precision position and relative-position knowledge including Global Positioning System (GPS) mid celestial navigation; high degrees of spacecraft autonomy inter-spacecraft communication capabilities; targeting and control including distributed control algorithms, and high precision control thrusters and actuators. This paper provides an overview of a selection of the current activities NASA/DoD/Industry/Academia are working to develop Formation Flying technologies as quickly as possible, the hurdles that need to be overcome to achieve our formation flying vision, and the team's approach to transfer this technology to space. It will also describe several of the formation flying testbeds, such as Orion and University Nanosatellites, that are being developed to demonstrate and validate many of these innovative sensing and formation control technologies.

  19. The Teaching of Anthropogenic Climate Change and Earth Science via Technology-Enabled Inquiry Education

    Science.gov (United States)

    Bush, Drew; Sieber, Renee; Seiler, Gale; Chandler, Mark

    2016-01-01

    A gap has existed between the tools and processes of scientists working on anthropogenic global climate change (AGCC) and the technologies and curricula available to educators teaching the subject through student inquiry. Designing realistic scientific inquiry into AGCC poses a challenge because research on it relies on complex computer models, globally distributed data sets, and complex laboratory and data collection procedures. Here we examine efforts by the scientific community and educational researchers to design new curricula and technology that close this gap and impart robust AGCC and Earth Science understanding. We find technology-based teaching shows promise in promoting robust AGCC understandings if associated curricula address mitigating factors such as time constraints in incorporating technology and the need to support teachers implementing AGCC and Earth Science inquiry. We recommend the scientific community continue to collaborate with educational researchers to focus on developing those inquiry technologies and curricula that use realistic scientific processes from AGCC research and/or the methods for determining how human society should respond to global change.

  20. NASA Green Flight Challenge: Conceptual Design Approaches and Technologies to Enable 200 Passenger Miles per Gallon

    Science.gov (United States)

    Wells, Douglas P.

    2011-01-01

    The Green Flight Challenge is one of the National Aeronautics and Space Administration s Centennial Challenges designed to push technology and make passenger aircraft more efficient. Airliners currently average around 50 passenger-miles per gallon and this competition will push teams to greater than 200 passenger-miles per gallon. The aircraft must also fly at least 100 miles per hour for 200 miles. The total prize money for this competition is $1.65 Million. The Green Flight Challenge will be run by the Comparative Aircraft Flight Efficiency (CAFE) Foundation September 25 October 1, 2011 at Charles M. Schulz Sonoma County Airport in California. Thirteen custom aircraft were developed with electric, bio-diesel, and other bio-fuel engines. The aircraft are using various technologies to improve aerodynamic, propulsion, and structural efficiency. This paper will explore the feasibility of the rule set, competitor vehicles, design approaches, and technologies used.

  1. Additive Manufacturing: An Enabling Technology for the MoonBEAM 6U CubeSat Missions

    Science.gov (United States)

    Hopkins, R. C.; Hickman, R. R.; Cavender, D. P.; Dominquez, A.; Schnell, A. R.; Baysinger, M.; Capizzo, P.; Garcia, J.; Fabisinski, L. L.

    2017-01-01

    The Advanced Concepts Office at the NASA Marshall Space Flight Center completed a mission concept study for the Moon Burst Energetics All-sky Monitor (MoonBEAM). The goal of the concept study was to show the enabling aspects that additive manufacturing can provide to CubeSats. In addition to using the additively manufactured tanks as part of the spacecraft structure, the main propulsion system uses a green propellant, which is denser than hydrazine. Momentum unloading is achieved with electric microthrusters, eliminating much of the propellant plumbing. The science mission, requirements, and spacecraft design are described.

  2. Technology-enabled employee selection: Tweaking the system for better person-environment fit

    DEFF Research Database (Denmark)

    Holm, Anna B.

    Organizations increasingly use information and communication technologies to facilitate their employee selection process. The practice is commonly referred to as e-selection. Recent research has shown that e-selection can significantly improve the efficiency of assessment and selection. However......, organizations also strive to hire the best possible candidates and seek to improve effectiveness of their selection process and achieve better person–environment (PE) fit. The presented research reviews existing literature on PE fit and e-selection and puts forward a heuristic model of technology...

  3. Remote patient management: technology-enabled innovation and evolving business models for chronic disease care.

    Science.gov (United States)

    Coye, Molly Joel; Haselkorn, Ateret; DeMello, Steven

    2009-01-01

    Remote patient management (RPM) is a transformative technology that improves chronic care management while reducing net spending for chronic disease. Broadly deployed within the Veterans Health Administration and in many small trials elsewhere, RPM has been shown to support patient self-management, shift responsibilities to non-clinical providers, and reduce the use of emergency department and hospital services. Because transformative technologies offer major opportunities to advance national goals of improved quality and efficiency in health care, it is important to understand their evolution, the experiences of early adopters, and the business models that may support their deployment.

  4. Pervasive, disruptive, seductive, enabling : designing technologies for learning and social innovation

    NARCIS (Netherlands)

    Marti, P.

    2015-01-01

    “There are no technological revolutions without cultural transformations.” This is a quote from the book “The Internet Galaxy: Refl ections on the Internet, Business, and Society” by Manuel Castells (2003), in which the author explores the complexity of the social problems generated by the spread of

  5. To See Anew: New Technologies Are Moving Rapidly Toward Restoring or Enabling Vision in the Blind.

    Science.gov (United States)

    Grifantini, Kristina

    2017-01-01

    Humans have been using technology to improve their vision for many decades. Eyeglasses, contact lenses, and, more recently, laser-based surgeries are commonly employed to remedy vision problems, both minor and major. But options are far fewer for those who have not seen since birth or who have reached stages of blindness in later life.

  6. Flexible barrier technology for enabling rollable AMOLED displays and upscaling flexible OLED lighting

    NARCIS (Netherlands)

    Li, F.M.; Unnikrishnan, S.; Weijer, P. van de; Assche, F. van; Shen, J.; Ellis, T.; Manders, W.; Akkerman, H.; Bouten, P.; Mol, A.M.B. van

    2013-01-01

    The availability of a high performance thin-film barrier is the most critical challenge in upscaling and commercializing flexible OLED products. We report a flexible thin-film-barrier technology that meets lifetime specifications for OLED lighting, and demonstrate it in rollable QVGA a-IGZO AMOLED

  7. The Teaching of Anthropogenic Climate Change and Earth Science via Technology-Enabled Inquiry Education

    Science.gov (United States)

    Bush, Drew; Sieber, Renee; Seiler, Gale; Chandler, Mark

    2016-01-01

    A gap has existed between the tools and processes of scientists working on anthropogenic global climate change (AGCC) and the technologies and curricula available to educators teaching the subject through student inquiry. Designing realistic scientific inquiry into AGCC poses a challenge because research on it relies on complex computer models,…

  8. Nano-enabled medical devices based on biosensing principles: technology basis and new concepts

    Directory of Open Access Journals (Sweden)

    Christina G. Siontorou

    2017-02-01

    Full Text Available Research and development in the biosensors for medical applications remain a focused area benefiting industry, society and knowledge production alike. The framework established is conducive to innovation and rapid assimilation of technological change. At the advent of nanotechnology, the various biosensor classes have been benefited in different ways, scales and rates. This paper studies the nanotechnology-driven shifting of the biosensor innovation system towards new concepts and the broadening, in depth and extent, of its science base. The scientific domain of (nanobiosensors has been studied using a roadmapping framework, especially developed to handle the dynamics and scopes of academic research. The results indicate that the sector seized the opportunities that nanotools offered to solve technology problems and revisit old concepts for optimizing the traditional platforms. Yet, the ability to control nanoeffects fuels a new transition towards bioelectronic integration that sets entirely new horizons for future trajectories.

  9. Enabling technology: an overview of offshore innovations in the oil industry

    Energy Technology Data Exchange (ETDEWEB)

    Amado, Luiz C.N. [Shell International Exploration and Production (E and P) Inc., Houston, TX (Brazil)

    2008-07-01

    Big accumulations found in the past are not likely to occur again. On the contrary several small size accumulations may still be there unless a new play be discovered such as the sub salt. With global demand for oil rapidly increasing and easy oil becoming scarcer, we need to start looking at more difficult reservoirs from which to produce hydrocarbons. To boost daily global oil supplies to 100 million barrels, against current levels of some 85 million barrels, will be 'extremely difficult to reach' as we have heard in the news. It is not a question of available oil reserves, but a combination of technology, geopolitics and actual production decline in existing fields. Geopolitics and depletion rates are highly complex variables upon which we do not have full control. However Technology can still be designed fit for purposes. (author)

  10. A Literature Review on Operator Interface Technologies for Network Enabled Operational Environments Using Complex System Analysis

    Science.gov (United States)

    2009-05-30

    d’interface fondées sur le comportement et sur la psychologie , ainsi que des méthodes de conception et de mise en œuvre d’interfaces multi-agents. On a mis...réseaucentriques. Ces technologies comprennent des approches de conception d’interface fondées sur le comportement et sur la psychologie , ainsi que des

  11. On the cutting edge technology enabling the challenging missions to asteroids and comets, our primitive neighbors

    Science.gov (United States)

    Kawaguchi, J.

    2014-07-01

    The world's first sample-and-return mission from an object orbiting outside the sphere of influence of the Earth was successfully performed through Hayabusa in 2010, an engineering demonstration mission of JAXA. And it was followed by another technology demonstrator, Ikaros, the world's first solar-sail mission launched in 2010, the same year of the Hayabusa return. These two demonstrations represent the significance of the technology development that shall precede the real science missions that will follow. The space-exploration community focuses its attention on the use of asteroids and comets as one of the most immediate destinations. Humans will perform voyages to those objects sooner or later. And we will initiate a kind of research as scientific activity for those objects. The missions may include even sample-and-return missions to those bodies for assessing the chance of possible resource utilization in future. The first step for it is, needless to say, science. Combining the sample-and-return technology using the ultra-high-speed reentry for sample recovery with the new propulsion system using both electric and photon force will be the direct conclusion from Hayabusa and Ikaros. And key elements such as autonomy are also among the essential factors in making the sophisticated operation possible around asteroids and comets avoiding the communication difficulty. This presentation will comprehensively touch on what those technology skills are, and how they are applicable to the subsequent new missions, from the mission leader's point of view. They are probably real requisites for planning brand-new innovative challenges in the ACM community.

  12. Extension and Prerequisite: An Algorithm to Enable Relations Between Responses in Chatbot Technology

    OpenAIRE

    Abbas S. Lokman; Jasni M. Zain

    2010-01-01

    Problem statement: Artificial intelligence chatbot is a technology that makes interactions between man and machines using natural language possible. From literature, we found out that in general, chatbot are functions like a typical search engine. Although chatbot just produced only one output instead of multiple outputs/results, the basic process flow is the same where each time an input is entered, the new search will be done. Nothing related to previous output. This research is focused on ...

  13. Enabling technologies promise to revitalize the role of nursing in an era of patient safety.

    Science.gov (United States)

    Ball, Marion J; Weaver, Charlotte; Abbott, Patricia A

    2003-01-01

    The application of information technology (IT) in health care has the potential to transform the delivery of care, as well as the health care work environment, by streamlining processes, making procedures more accurate and efficient, and reducing the risk of human error. For nurses, a major aspect of this transformation is the refocusing of their work on direct patient care and away from being a conduit of information and communication among departments. Several of the technologies discussed, such as physician order entry and bar code technology, have existed for years as standalone systems. Many others are just being developed and are being integrated into complex clinical information systems (CISs) with clinical decision support at their core. While early evaluation of these systems shows positive outcome measurements, financial, technical, and organizational hurdles to widespread implementation still remain. One major issue is defining the role nurses, themselves, will play in the selection and implementation of these systems as they become more steeped in the knowledge of nursing informatics. Other challenges revolve around issues of job satisfaction and the attraction and retention of nursing staff in the midst of a serious nursing shortage. Despite these concerns, it is expected that, in the long run, the creation of an electronic work environment with systems that integrate all functions of the health care team will positively impact cost-effectiveness, productivity, and patient safety while helping to revitalize nursing practice. Copyright 2002 Elsevier Science Ireland Ltd.

  14. NREL Topic 1 Final Report: Cohesive Application of Standards-Based Connected Devices to Enable Clean Energy Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Hudgins, Andrew P. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sparn, Bethany F. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jin, Xin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Seal, Brian [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States)

    2018-02-21

    This document is the final report of a two-year development, test, and demonstration project entitled 'Cohesive Application of Standards-Based Connected Devices to Enable Clean Energy Technologies.' The project was part of the National Renewable Energy Laboratory's (NREL) Integrated Network Test-bed for Energy Grid Research and Technology (INTEGRATE) initiative. The Electric Power Research Institute (EPRI) and a team of partners were selected by NREL to carry out a project to develop and test how smart, connected consumer devices can act to enable the use of more clean energy technologies on the electric power grid. The project team includes a set of leading companies that produce key products in relation to achieving this vision: thermostats, water heaters, pool pumps, solar inverters, electric vehicle supply equipment, and battery storage systems. A key requirement of the project was open access at the device level - a feature seen as foundational to achieving a future of widespread distributed generation and storage. The internal intelligence, standard functionality and communication interfaces utilized in this project result in the ability to integrate devices at any level, to work collectively at the level of the home/business, microgrid, community, distribution circuit or other. Collectively, the set of products serve as a platform on which a wide range of control strategies may be developed and deployed.

  15. An Investigation of Information Technology-Enabled Remote Management and Remote Work Issues

    Directory of Open Access Journals (Sweden)

    D. Sandy Staples

    1997-05-01

    Full Text Available A two phase research study was done to investigate remote work and remote management issues. In Phase 1, focus groups were carried out with remote managers and remote employees to identify key issues. The most common key issues dealt with communications, information technology, leadership and coaching, teamwork, building trust, and performance management. In the second phase, a questionnaire was used to test hypotheses developed from phase 1. The findings supported that higher trust leads to higher job satisfaction and lower job stress, and that more communication between the manager and the remote employee develops higher levels of employee organizational commitment.

  16. Enabling mobile/wireless broadband technologies and services for the next billion users

    CSIR Research Space (South Africa)

    Mekuria, F

    2011-09-01

    Full Text Available devices, service activation and delivery will also be seamless. 3GPP UMTS-4G technology with the HSPA and LTE (long term evolution) capabilities are the industry?s favorite standard and choice for wireless broadband[1,2,14,15]. When it comes... interference as possible to existing primary users, in the case of licensed primary users in that frequency band. A sample of a white space measurement in using a spectrum monitoring device is depicted in Figure 4. Figure 4., Spectrum Between 800...

  17. Double-Loop Health Technology: Enabling Socio-technical Design of Personal Health Technology in Clinical Practice

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Frost, Mads

    2018-01-01

    present a case of designing personal health technology for mental health, which is integrated into hospital-based treatment. This system helps patients to manage their disease by tracking and correlation behavior and disease progression and provide feedback to them, while also deployed as part......Personal health technology is rapidly emerging as a response to the challenges associated with significant increase in chronic noncommunicable diseases. The overall design paradigm behind most of these applications is to manually and automatically sample data from sensors and smartphones and use...... this to provide patients with an awareness of their illness and give recommendation for treatment, care, and healthy living. Few of these systems are, however, designed to be part of a complex socio-technical care and treatment processes in existing healthcare systems and clinical pathways. In this chapter, we...

  18. Understanding access and use of technology among youth with first-episode psychosis to inform the development of technology-enabled therapeutic interventions.

    Science.gov (United States)

    Abdel-Baki, Amal; Lal, Shalini; D-Charron, Olivier; Stip, Emmanuel; Kara, Nadjia

    2017-02-01

    Computers, video games and technological devices are part of young people's everyday lives. However, their use in first-episode psychosis (FEP) treatment is rare. The purpose of this study was to better understand the access and use of technology among individuals with FEP, including gaming activities, to inform future development of technology-enabled therapeutic applications. Self-administered survey on use of technological tools in 71 FEP individuals. PCs/laptops were used by all participants; cellphones/smartphones by 92%, consoles by 83% (mainly male and younger participants). Women texted and used social networks more frequently; men played games (mainly action) more often. The younger individuals reported playing games frequently (32% daily) with less use of the Web and social networks (favourite: Facebook). These data will be useful for developing Web-based psychoeducation tools and cognitive remediation video games for youth with FEP. © 2015 Wiley Publishing Asia Pty Ltd.

  19. Launch Vehicles Based on Advanced Hybrid Rocket Motors: An Enabling Technology for the Commercial Small and Micro Satellite Planetary Science

    Science.gov (United States)

    Karabeyoglu, Arif; Tuncer, Onur; Inalhan, Gokhan

    2016-07-01

    Mankind is relient on chemical propulsion systems for space access. Nevertheless, this has been a stagnant area in terms of technological development and the technology base has not changed much almost for the past forty years. This poses a vicious circle for launch applications such that high launch costs constrain the demand and low launch freqencies drive costs higher. This also has been a key limiting factor for small and micro satellites that are geared towards planetary science. Rather this be because of the launch frequencies or the costs, the access of small and micro satellites to orbit has been limited. With today's technology it is not possible to escape this circle. However the emergence of cost effective and high performance propulsion systems such as advanced hybrid rockets can decrease launch costs by almost an order or magnitude. This paper briefly introduces the timeline and research challenges that were overcome during the development of advanced hybrid LOX/paraffin based rockets. Experimental studies demonstrated effectiveness of these advanced hybrid rockets which incorporate fast burning parafin based fuels, advanced yet simple internal balistic design and carbon composite winding/fuel casting technology that enables the rocket motor to be built from inside out. A feasibility scenario is studied using these rocket motors as building blocks for a modular launch vehicle capable of delivering micro satellites into low earth orbit. In addition, the building block rocket motor can be used further solar system missions providing the ability to do standalone small and micro satellite missions to planets within the solar system. This enabling technology therefore offers a viable alternative in order to escape the viscous that has plagued the space launch industry and that has limited the small and micro satellite delivery for planetary science.

  20. Visual prostheses: The enabling technology to give sight to the blind

    Directory of Open Access Journals (Sweden)

    Mohammad Hossein Maghami

    2014-01-01

    Full Text Available Millions of patients are either slowly losing their vision or are already blind due to retinal degenerative diseases such as retinitis pigmentosa (RP and age-related macular degeneration (AMD or because of accidents or injuries. Employment of artificial means to treat extreme vision impairment has come closer to reality during the past few decades. Currently, many research groups work towards effective solutions to restore a rudimentary sense of vision to the blind. Aside from the efforts being put on replacing damaged parts of the retina by engineered living tissues or microfabricated photoreceptor arrays, implantable electronic microsystems, referred to as visual prostheses, are also sought as promising solutions to restore vision. From a functional point of view, visual prostheses receive image information from the outside world and deliver them to the natural visual system, enabling the subject to receive a meaningful perception of the image. This paper provides an overview of technical design aspects and clinical test results of visual prostheses, highlights past and recent progress in realizing chronic high-resolution visual implants as well as some technical challenges confronted when trying to enhance the functional quality of such devices.

  1. Synthetic biology meets bioprinting: enabling technologies for humans on Mars (and Earth).

    Science.gov (United States)

    Rothschild, Lynn J

    2016-08-15

    Human exploration off planet is severely limited by the cost of launching materials into space and by re-supply. Thus materials brought from Earth must be light, stable and reliable at destination. Using traditional approaches, a lunar or Mars base would require either transporting a hefty store of metals or heavy manufacturing equipment and construction materials for in situ extraction; both would severely limit any other mission objectives. Long-term human space presence requires periodic replenishment, adding a massive cost overhead. Even robotic missions often sacrifice science goals for heavy radiation and thermal protection. Biology has the potential to solve these problems because life can replicate and repair itself, and perform a wide variety of chemical reactions including making food, fuel and materials. Synthetic biology enhances and expands life's evolved repertoire. Using organisms as feedstock, additive manufacturing through bioprinting will make possible the dream of producing bespoke tools, food, smart fabrics and even replacement organs on demand. This new approach and the resulting novel products will enable human exploration and settlement on Mars, while providing new manufacturing approaches for life on Earth. © 2016 The Author(s).

  2. Islet Transplantation without Borders Enabling islet transplantation in Greece with international collaboration and innovative technology

    Science.gov (United States)

    Papas, Klearchos K; Karatzas, Theodore; Berney, Thierry; Minor, Thomas; Pappas, Paris; Pattou, François; Shaw, James; Toso, Christian; Schuurman, Henk-Jan

    2012-01-01

    Recently, initiatives have been undertaken to establish an islet transplantation program in Athens, Greece. A major hurtle is the high cost associated with the establishment and maintenance of a clinical-grade islet manufacturing center. A collaboration was established with the University Hospitals of Geneva, Switzerland, to enable remote islet cell manufacturing with an established and validated fully operational team. However, remote islet manufacturing requires shipment of the pancreas from the procurement to the islet manufacturing site (in this case from anywhere in Greece to Geneva) and then shipment of the islets from the manufacturing site to the transplant site (from Geneva to Athens). To address challenges related to cold ischemia time of the pancreas and shipment time of islets, a collaboration was initiated with the University of Arizona, Tucson, USA. An international workshop was held in Athens, December 2011, to mark the start of this collaborative project. Experts in the field presented in three main sessions: [1] Islet transplantation: state-of-the-art, and the “network approach”; [2] Technical aspects of clinical islet transplantation and outcomes; and [3] Islet manufacturing – from the donated pancreas to the islet product. This manuscript presents a summary of the workshop. PMID:23330863

  3. Sensors 4.0 – smart sensors and measurement technology enable Industry 4.0

    Directory of Open Access Journals (Sweden)

    A. Schütze

    2018-05-01

    Full Text Available Industrie 4.0 or the Industrial Internet of Things (IIoT are two terms for the current (revolution seen in industrial automation and control. Everything is getting smarter and data generated at all levels of the production process are used to improve product quality, flexibility, and productivity. This would not be possible without smart sensors, which generate the data and allow further functionality from self-monitoring and self-configuration to condition monitoring of complex processes. In analogy to Industry 4.0, the development of sensors has undergone distinctive stages culminating in today's smart sensors or Sensor 4.0. This paper briefly reviews the development of sensor technology over the last 2 centuries, highlights some of the potential that can be achieved with smart sensors and data evaluation, and discusses success requirements for future developments. In addition to magnetic sensor technologies which allow self-test and self-calibration and can contribute to many applications due to their wide spectrum of measured quantities, the paper discusses condition monitoring as a primary paradigm for introducing smart sensors and data analysis in manufacturing processes based on two projects performed in our group.

  4. Fluorescence imaging with near-infrared light: new technological advances that enable in vivo molecular imaging

    International Nuclear Information System (INIS)

    Ntziachristos, Vasilis; Bremer, Christoph; Weissleder, Ralph

    2003-01-01

    A recent development in biomedical imaging is the non-invasive mapping of molecular events in intact tissues using fluorescence. Underpinning to this development is the discovery of bio-compatible, specific fluorescent probes and proteins and the development of highly sensitive imaging technologies for in vivo fluorescent detection. Of particular interest are fluorochromes that emit in the near infrared (NIR), a spectral window, whereas hemoglobin and water absorb minimally so as to allow photons to penetrate for several centimetres in tissue. In this review article we concentrate on optical imaging technologies used for non-invasive imaging of the distribution of such probes. We illuminate the advantages and limitations of simple photographic methods and turn our attention to fluorescence-mediated molecular tomography (FMT), a technique that can three-dimensionally image gene expression by resolving fluorescence activation in deep tissues. We describe theoretical specifics, and we provide insight into its in vivo capacity and the sensitivity achieved. Finally, we discuss its clinical feasibility. (orig.)

  5. Demonstration of Enabling Spar-Shell Cooling Technology in Gas Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Downs, James [Florida Turbine Technologies Inc., Jupiter, FL (United States)

    2014-12-29

    In this Advanced Turbine Program-funded Phase III project, Florida Turbine Technologies, Inc. (FTT) has developed and tested, at a pre-commercial prototypescale, spar-shell turbine airfoils in a commercial gas turbine. The airfoil development is based upon FTT’s research and development to date in Phases I and II of Small Business Innovative Research (SBIR) grants. During this program, FTT has partnered with an Original Equipment Manufacturer (OEM), Siemens Energy, to produce sparshell turbine components for the first pre-commercial prototype test in an F-Class industrial gas turbine engine and has successfully completed validation testing. This project will further the commercialization of this new technology in F-frame and other highly cooled turbine airfoil applications. FTT, in cooperation with Siemens, intends to offer the spar-shell vane as a first-tier supplier for retrofit applications and new large frame industrial gas turbines. The market for the spar-shell vane for these machines is huge. According to Forecast International, 3,211 new gas turbines units (in the >50MW capacity size range) will be ordered in ten years from 2007 to 2016. FTT intends to enter the market in a low rate initial production. After one year of successful extended use, FTT will quickly ramp up production and sales, with a target to capture 1% of the market within the first year and 10% within 5 years (2020).

  6. Working conditions and health among employees at information technology--enabled services: a review of current evidence.

    Science.gov (United States)

    Kesavachandran, C; Rastogi, S K; Das, Mohan; Khan, Asif M

    2006-07-01

    Workers in information technology (IT)-enabled services like business process outsourcing and call centers working with visual display units are reported to have various health and psycho-social disorders. Evidence from previously published studies in peer- reviewed journals and internet sources were examined to explore health disorders and psycho-social problems among personnel employed in IT-based services, for a systematic review on the topic. In addition, authors executed a questionnaire- based pilot study. The available literature and the pilot study, both suggest health disorders and psychosocial problems among workers of business process outsourcing. The details are discussed in the review.

  7. Power scaling of ultrafast mid-IR source enabled by high-power fiber laser technology

    International Nuclear Information System (INIS)

    Zhou, Gengji

    2017-11-01

    Ultrafast laser sources with high repetition-rate (>10 MHz) and tunable in the mid-infrared (IR) wavelength range of 7-18 μm hold promise for many important spectroscopy applications. Currently, these ultrafast mid- to longwavelength-IR sources can most easily be achieved via difference-frequency generation (DFG) between a pump beam and a signal beam. However, current ultrafast mid- to longwavelength-IR sources feature a low average power, which limits their applications. In this thesis, we propose and demonstrate a novel approach to power scaling of DFG-based ultrafast mid-IR laser sources. The essence of this novel approach is the generation of a high-energy signal beam. Both the pump beam and the signal beam are derived from a home-built Yb-fiber laser system that emits 165-fs pulses centered at 1035 nm with 30-MHz repetition rate and 14.5-W average power (corresponding to 483-nJ pulse energy). We employ fiber-optic self-phase modulation (SPM) to broaden the laser spectrum and generate isolated spectral lobes. Filtering the rightmost spectral lobe leads to femtosecond pulses with >10 nJ pulse energy. Tunable between 1.1-1.2 μm, this SPM-enabled ultrafast source exhibits ∝100 times higher pulse energy than can be obtained from Raman soliton sources in this wavelength range. We use this SPM-enabled source as the signal beam and part of the Yb-fiber laser output as the pump beam. By performing DFG in GaSe crystals, we demonstrate that power scaling of a DFG-based mid-IR source can be efficiently achieved by increasing the signal energy. The resulting mid-IR source is tunable from 7.4 μm to 16.8 μm. Up to 5.04-mW mid-IR pulses centered at 11 μm are achieved. The corresponding pulse energy is 167 pJ, representing nearly one order of magnitude improvement compared with other reported DFG-based mid-IR sources at this wavelength. Despite of low pulse energy, Raman soliton sources have become a popular choice as the signal source. We carry out a detailed study on

  8. Power scaling of ultrafast mid-IR source enabled by high-power fiber laser technology

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Gengji

    2017-11-15

    Ultrafast laser sources with high repetition-rate (>10 MHz) and tunable in the mid-infrared (IR) wavelength range of 7-18 μm hold promise for many important spectroscopy applications. Currently, these ultrafast mid- to longwavelength-IR sources can most easily be achieved via difference-frequency generation (DFG) between a pump beam and a signal beam. However, current ultrafast mid- to longwavelength-IR sources feature a low average power, which limits their applications. In this thesis, we propose and demonstrate a novel approach to power scaling of DFG-based ultrafast mid-IR laser sources. The essence of this novel approach is the generation of a high-energy signal beam. Both the pump beam and the signal beam are derived from a home-built Yb-fiber laser system that emits 165-fs pulses centered at 1035 nm with 30-MHz repetition rate and 14.5-W average power (corresponding to 483-nJ pulse energy). We employ fiber-optic self-phase modulation (SPM) to broaden the laser spectrum and generate isolated spectral lobes. Filtering the rightmost spectral lobe leads to femtosecond pulses with >10 nJ pulse energy. Tunable between 1.1-1.2 μm, this SPM-enabled ultrafast source exhibits ∝100 times higher pulse energy than can be obtained from Raman soliton sources in this wavelength range. We use this SPM-enabled source as the signal beam and part of the Yb-fiber laser output as the pump beam. By performing DFG in GaSe crystals, we demonstrate that power scaling of a DFG-based mid-IR source can be efficiently achieved by increasing the signal energy. The resulting mid-IR source is tunable from 7.4 μm to 16.8 μm. Up to 5.04-mW mid-IR pulses centered at 11 μm are achieved. The corresponding pulse energy is 167 pJ, representing nearly one order of magnitude improvement compared with other reported DFG-based mid-IR sources at this wavelength. Despite of low pulse energy, Raman soliton sources have become a popular choice as the signal source. We carry out a detailed study on

  9. Virtual and augmented medical imaging environments: enabling technology for minimally invasive cardiac interventional guidance.

    Science.gov (United States)

    Linte, Cristian A; White, James; Eagleson, Roy; Guiraudon, Gérard M; Peters, Terry M

    2010-01-01

    Virtual and augmented reality environments have been adopted in medicine as a means to enhance the clinician's view of the anatomy and facilitate the performance of minimally invasive procedures. Their value is truly appreciated during interventions where the surgeon cannot directly visualize the targets to be treated, such as during cardiac procedures performed on the beating heart. These environments must accurately represent the real surgical field and require seamless integration of pre- and intra-operative imaging, surgical tracking, and visualization technology in a common framework centered around the patient. This review begins with an overview of minimally invasive cardiac interventions, describes the architecture of a typical surgical guidance platform including imaging, tracking, registration and visualization, highlights both clinical and engineering accuracy limitations in cardiac image guidance, and discusses the translation of the work from the laboratory into the operating room together with typically encountered challenges.

  10. Systems biology of yeast: enabling technology for development of cell factories for production of advanced biofuels.

    Science.gov (United States)

    de Jong, Bouke; Siewers, Verena; Nielsen, Jens

    2012-08-01

    Transportation fuels will gradually shift from oil based fuels towards alternative fuel resources like biofuels. Current bioethanol and biodiesel can, however, not cover the increasing demand for biofuels and there is therefore a need for advanced biofuels with superior fuel properties. Novel cell factories will provide a production platform for advanced biofuels. However, deep cellular understanding is required for improvement of current biofuel cell factories. Fast screening and analysis (-omics) methods and metabolome-wide mathematical models are promising techniques. An integrated systems approach of these techniques drives diversity and quantity of several new biofuel compounds. This review will cover the recent technological developments that support improvement of the advanced biofuels 1-butanol, biodiesels and jetfuels. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. A Radar-Enabled Collaborative Sensor Network Integrating COTS Technology for Surveillance and Tracking

    Directory of Open Access Journals (Sweden)

    R. Murat Demirer

    2012-01-01

    Full Text Available The feasibility of using Commercial Off-The-Shelf (COTS sensor nodes is studied in a distributed network, aiming at dynamic surveillance and tracking of ground targets. Data acquisition by low-cost ( < $50 US miniature low-power radar through a wireless mote is described. We demonstrate the detection, ranging and velocity estimation, classification and tracking capabilities of the mini-radar, and compare results to simulations and manual measurements. Furthermore, we supplement the radar output with other sensor modalities, such as acoustic and vibration sensors. This method provides innovative solutions for detecting, identifying, and tracking vehicles and dismounts over a wide area in noisy conditions. This study presents a step towards distributed intelligent decision support and demonstrates effectiveness of small cheap sensors, which can complement advanced technologies in certain real-life scenarios.

  12. A radar-enabled collaborative sensor network integrating COTS technology for surveillance and tracking.

    Science.gov (United States)

    Kozma, Robert; Wang, Lan; Iftekharuddin, Khan; McCracken, Ernest; Khan, Muhammad; Islam, Khandakar; Bhurtel, Sushil R; Demirer, R Murat

    2012-01-01

    The feasibility of using Commercial Off-The-Shelf (COTS) sensor nodes is studied in a distributed network, aiming at dynamic surveillance and tracking of ground targets. Data acquisition by low-cost (wireless mote is described. We demonstrate the detection, ranging and velocity estimation, classification and tracking capabilities of the mini-radar, and compare results to simulations and manual measurements. Furthermore, we supplement the radar output with other sensor modalities, such as acoustic and vibration sensors. This method provides innovative solutions for detecting, identifying, and tracking vehicles and dismounts over a wide area in noisy conditions. This study presents a step towards distributed intelligent decision support and demonstrates effectiveness of small cheap sensors, which can complement advanced technologies in certain real-life scenarios.

  13. Plasma Doping - Enabling Technology for High Dose Logic and Memory Applications

    International Nuclear Information System (INIS)

    Miller, T.; Godet, L.; Papasouliotis, G. D.; Singh, V.

    2008-01-01

    As logic and memory device dimensions shrink with each generation, there are more high dose implants at lower energies. Examples include dual poly gate (also referred to as counter-doped poly), elevated source drain and contact plug implants. Plasma Doping technology throughput and dopant profile benefits at these ultra high dose and lower energy conditions have been well established [1,2,3]. For the first time a production-worthy plasma doping implanter, the VIISta PLAD tool, has been developed with unique architecture suited for precise and repeatable dopant placement. Critical elements of the architecture include pulsed DC wafer bias, closed-loop dosimetry and a uniform low energy, high density plasma source. In this paper key performance metrics such as dose uniformity, dose repeatability and dopant profile control will be presented that demonstrate the production-worthiness of the VIISta PLAD tool for several high dose applications.

  14. Cornell Fuel Cell Institute: Materials Discovery to Enable Fuel Cell Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Abruna, H.D.; DiSalvo, Francis J.

    2012-06-29

    The discovery and understanding of new, improved materials to advance fuel cell technology are the objectives of the Cornell Fuel Cell Institute (CFCI) research program. CFCI was initially formed in 2003. This report highlights the accomplishments from 2006-2009. Many of the grand challenges in energy science and technology are based on the need for materials with greatly improved or even revolutionary properties and performance. This is certainly true for fuel cells, which have the promise of being highly efficient in the conversion of chemical energy to electrical energy. Fuel cells offer the possibility of efficiencies perhaps up to 90 % based on the free energy of reaction. Here, the challenges are clearly in the materials used to construct the heart of the fuel cell: the membrane electrode assembly (MEA). The MEA consists of two electrodes separated by an ionically conducting membrane. Each electrode is a nanocomposite of electronically conducting catalyst support, ionic conductor and open porosity, that together form three percolation networks that must connect to each catalyst nanoparticle; otherwise the catalyst is inactive. This report highlights the findings of the three years completing the CFCI funding, and incudes developments in materials for electrocatalyts, catalyst supports, materials with structured and functional porosity for electrodes, and novel electrolyte membranes. The report also discusses developments at understanding electrocatalytic mechanisms, especially on novel catalyst surfaces, plus in situ characterization techniques and contributions from theory. Much of the research of the CFCI continues within the Energy Materials Center at Cornell (emc2), a DOE funded, Office of Science Energy Frontier Research Center (EFRC).

  15. An exploratory investigation of barriers and enablers affecting investment in renewable companies and technologies in the UK.

    Science.gov (United States)

    Wells, Victoria; Greenwell, Felicity; Covey, Judith; Rosenthal, Harriet E S; Adcock, Mike; Gregory-Smith, Diana

    2013-02-06

    The last few years have seen considerable research expenditure on renewable fuel technologies. However, in many cases, the necessary sustained and long-term funding from the investment community has not been realized at a level needed to allow technologies to become reality. According to global consulting firm Deloitte's recent renewable energy report (http://www.deloitte.com/energypredictions2012), many renewable energy projects stalled or were not completed because of issues including the global economy, the state of government finances, difficulties in funding and regulatory uncertainty. This investigation concentrates on the funding aspect and explores the perceived barriers and enablers to renewable technologies within the investment and renewables community. Thematic analysis of 14 in-depth interviews with representatives from renewable energy producers, banks and investment companies identified key factors affecting the psychology of investor behaviour in renewables. Eight key issues are highlighted, including a range of barriers and enablers, the role of the government, balance between cost/risk, value/return on investment, investment time scales, personality/individual differences of investors and the level of innovation in the renewable technology. It was particularly notable that in the findings the role of the government was discussed more than other themes and generally in quite critical terms, highlighting the need to ensure consistency in government funding and policy and a greater understanding of how government decision-making happens. Specific findings such as these illustrate the value of crossing disciplinary boundaries and highlight potential further research. Behavioural science and economic psychology in particular have much to offer at the interface of other disciplines such as political science and financial economics.

  16. An exploratory investigation of barriers and enablers affecting investment in renewable companies and technologies in the UK

    Science.gov (United States)

    Wells, Victoria; Greenwell, Felicity; Covey, Judith; Rosenthal, Harriet E. S.; Adcock, Mike; Gregory-Smith, Diana

    2013-01-01

    The last few years have seen considerable research expenditure on renewable fuel technologies. However, in many cases, the necessary sustained and long-term funding from the investment community has not been realized at a level needed to allow technologies to become reality. According to global consulting firm Deloitte's recent renewable energy report (http://www.deloitte.com/energypredictions2012), many renewable energy projects stalled or were not completed because of issues including the global economy, the state of government finances, difficulties in funding and regulatory uncertainty. This investigation concentrates on the funding aspect and explores the perceived barriers and enablers to renewable technologies within the investment and renewables community. Thematic analysis of 14 in-depth interviews with representatives from renewable energy producers, banks and investment companies identified key factors affecting the psychology of investor behaviour in renewables. Eight key issues are highlighted, including a range of barriers and enablers, the role of the government, balance between cost/risk, value/return on investment, investment time scales, personality/individual differences of investors and the level of innovation in the renewable technology. It was particularly notable that in the findings the role of the government was discussed more than other themes and generally in quite critical terms, highlighting the need to ensure consistency in government funding and policy and a greater understanding of how government decision-making happens. Specific findings such as these illustrate the value of crossing disciplinary boundaries and highlight potential further research. Behavioural science and economic psychology in particular have much to offer at the interface of other disciplines such as political science and financial economics. PMID:24427512

  17. Fertility tourism: circumventive routes that enable access to reproductive technologies and substances.

    Science.gov (United States)

    Bergmann, Sven

    2011-01-01

    “Fertility tourism” is a journalistic eye‐catcher focusing on the phenomenon of patients who search for a reproductive treatment in another country in order to circumvent laws, access restrictions, or waiting lists in their home country. In Europe, the reasons why people seek reproductive treatments outside their national boundaries are quite diverse, in part because regulations differ so much among countries. Beginning with four examples of people who crossed borders for an in vitro fertilization (IVF) treatment with gamete donation, this article provides some insight into these transnational circumvention practices based on material from ethnographic fieldwork and interviews in Spain, Denmark, and the Czech Republic. In all three countries, gamete donation is made strictly anonymous. Clinical practices such as egg donor recruitment and phenotypical matching between donors and recipients serve to naturalize the substitution of gametes and to install social legitimacy through resemblance markers with the prospective child. In comparison to other areas of medical tourism, which are subjects of debate as a consequence of neoliberal health politics and international medical competition, mobility in the area of reproductive technologies is deeply intertwined with new forms of doing kinship. For prospective parents, it holds a promise of generating offspring who could pass as biogenetically conceived children. Therefore, IVF with gamete donation is mostly modeled after conceptions of nature. Through anonymity and concealment it creates forms of nonrelatedness that leave space for future imaginings and traces of transnational genetic creators.

  18. Metal hydride hydrogen and heat storage systems as enabling technology for spacecraft applications

    Energy Technology Data Exchange (ETDEWEB)

    Reissner, Alexander, E-mail: reissner@fotec.at [FOTEC Forschungs- und Technologietransfer GmbH, Viktor Kaplan Straße 2, 2700 Wiener Neustadt (Austria); University of Applied Sciences Wiener Neustadt, Johannes Gutenberg-Straße 3, 2700 Wiener Neustadt (Austria); Pawelke, Roland H.; Hummel, Stefan; Cabelka, Dusan [FOTEC Forschungs- und Technologietransfer GmbH, Viktor Kaplan Straße 2, 2700 Wiener Neustadt (Austria); Gerger, Joachim [University of Applied Sciences Wiener Neustadt, Johannes Gutenberg-Straße 3, 2700 Wiener Neustadt (Austria); Farnes, Jarle, E-mail: Jarle.farnes@prototech.no [CMR Prototech AS, Fantoftvegen 38, PO Box 6034, 5892 Bergen (Norway); Vik, Arild; Wernhus, Ivar; Svendsen, Tjalve [CMR Prototech AS, Fantoftvegen 38, PO Box 6034, 5892 Bergen (Norway); Schautz, Max, E-mail: max.schautz@esa.int [European Space Agency, ESTEC – Keplerlaan 1, 2201 AZ Noordwijk Zh (Netherlands); Geneste, Xavier, E-mail: xavier.geneste@esa.int [European Space Agency, ESTEC – Keplerlaan 1, 2201 AZ Noordwijk Zh (Netherlands)

    2015-10-05

    Highlights: • A metal hydride tank concept for heat and hydrogen storage is presented. • The tank is part of a closed-loop reversible fuel cell system for space application. • For several engineering issues specific to the spacecraft application, solutions have been developed. • The effect of water contamination has been approximated for Ti-doped NaAlH{sub 4}. • A novel heat exchanger design has been realized by Selective Laser Melting. - Abstract: The next generation of telecommunication satellites will demand a platform payload performance in the range of 30+ kW within the next 10 years. At this high power output, a Regenerative Fuel Cell Systems (RFCS) offers an efficiency advantage in specific energy density over lithium ion batteries. However, a RFCS creates a substantial amount of heat (60–70 kJ per mol H{sub 2}) during fuel cell operation. This requires a thermal hardware that accounts for up to 50% of RFCS mass budget. Thus the initial advantage in specific energy density is reduced. A metal hydride tank for combined storage of heat and hydrogen in a RFCS may overcome this constraint. Being part of a consortium in an ongoing European Space Agency project, FOTEC is building a technology demonstrator for such a combined hydrogen and heat storage system.

  19. Enabling breakthroughs in Parkinson’s disease with wearable technologies and big data analytics

    Science.gov (United States)

    Cohen, Shahar; Martig, Adria K.

    2016-01-01

    Parkinson’s disease (PD) is a progressive, degenerative disorder of the central nervous system that is diagnosed and measured clinically by the Unified Parkinson’s Disease Rating Scale (UPDRS). Tools for continuous and objective monitoring of PD motor symptoms are needed to complement clinical assessments of symptom severity to further inform PD therapeutic development across several arenas, from developing more robust clinical trial outcome measures to establishing biomarkers of disease progression. The Michael J. Fox Foundation for Parkinson’s Disease Research and Intel Corporation have joined forces to develop a mobile application and an Internet of Things (IoT) platform to support large-scale studies of objective, continuously sampled sensory data from people with PD. This platform provides both population and per-patient analyses, measuring gait, activity level, nighttime activity, tremor, as well as other structured assessments and tasks. All data collected will be available to researchers on an open-source platform. Development of the IoT platform raised a number of engineering considerations, including wearable sensor choice, data management and curation, and algorithm validation. This project has successfully demonstrated proof of concept that IoT platforms, wearable technologies and the data they generate offer exciting possibilities for more robust, reliable, and low-cost research methodologies and patient care strategies. PMID:28293596

  20. Human missions to Mars enabling technologies for exploring the red planet

    CERN Document Server

    Rapp, Donald

    2016-01-01

    A mission to send humans to explore the surface of Mars has been the ultimate goal of planetary exploration since the 1950s, when von Braun conjectured a flotilla of 10 interplanetary vessels carrying a crew of at least 70 humans. Since then, more than 1,000 studies were carried out on human missions to Mars, but after 60 years of study, we remain in the early planning stages. The second edition of this book now includes an annotated history of Mars mission studies, with quantitative data wherever possible. Retained from the first edition, Donald Rapp looks at human missions to Mars from an engineering perspective. He divides the mission into a number of stages: Earth’s surface to low-Earth orbit (LEO); departing from LEO toward Mars; Mars orbit insertion and entry, descent and landing; ascent from Mars; trans-Earth injection from Mars orbit and Earth return. For each segment, he analyzes requirements for candidate technologies. In this connection, he discusses the status and potential of a wide range of el...

  1. Scientific Data Management (SDM) Center for Enabling Technologies. 2007-2012

    Energy Technology Data Exchange (ETDEWEB)

    Ludascher, Bertram [Univ. of California, Davis, CA (United States); Altintas, Ilkay [Univ. of California, San Diego, CA (United States)

    2013-09-06

    Over the past five years, our activities have both established Kepler as a viable scientific workflow environment and demonstrated its value across multiple science applications. We have published numerous peer-reviewed papers on the technologies highlighted in this short paper and have given Kepler tutorials at SC06,SC07,SC08,and SciDAC 2007. Our outreach activities have allowed scientists to learn best practices and better utilize Kepler to address their individual workflow problems. Our contributions to advancing the state-of-the-art in scientific workflows have focused on the following areas. Progress in each of these areas is described in subsequent sections. Workflow development. The development of a deeper understanding of scientific workflows "in the wild" and of the requirements for support tools that allow easy construction of complex scientific workflows; Generic workflow components and templates. The development of generic actors (i.e.workflow components and processes) which can be broadly applied to scientific problems; Provenance collection and analysis. The design of a flexible provenance collection and analysis infrastructure within the workflow environment; and, Workflow reliability and fault tolerance. The improvement of the reliability and fault-tolerance of workflow environments.

  2. Enabling breakthroughs in Parkinson's disease with wearable technologies and big data analytics.

    Science.gov (United States)

    Cohen, Shahar; Bataille, Lauren R; Martig, Adria K

    2016-01-01

    Parkinson's disease (PD) is a progressive, degenerative disorder of the central nervous system that is diagnosed and measured clinically by the Unified Parkinson's Disease Rating Scale (UPDRS). Tools for continuous and objective monitoring of PD motor symptoms are needed to complement clinical assessments of symptom severity to further inform PD therapeutic development across several arenas, from developing more robust clinical trial outcome measures to establishing biomarkers of disease progression. The Michael J. Fox Foundation for Parkinson's Disease Research and Intel Corporation have joined forces to develop a mobile application and an Internet of Things (IoT) platform to support large-scale studies of objective, continuously sampled sensory data from people with PD. This platform provides both population and per-patient analyses, measuring gait, activity level, nighttime activity, tremor, as well as other structured assessments and tasks. All data collected will be available to researchers on an open-source platform. Development of the IoT platform raised a number of engineering considerations, including wearable sensor choice, data management and curation, and algorithm validation. This project has successfully demonstrated proof of concept that IoT platforms, wearable technologies and the data they generate offer exciting possibilities for more robust, reliable, and low-cost research methodologies and patient care strategies.

  3. Work of scientific and technological information under network environment

    International Nuclear Information System (INIS)

    Chen Yingxi; Huang Daifu; Yang Lifeng

    2010-01-01

    With the development of internet and information technology, the work of scientific and technological information is faced with great challenge. This article expounds the new changes of scientific and technological information in enterprise under network environment by giving a minute description on the situation the work faced and characteristic of the work. Not only does it carry out enthusiastic discussion upon problems which are present in the work of scientific and technological information in the company, but puts forward proposals and specific measures as well. Service theory is also offered by adjusting and reforming the resources construction, service ways and the job of providing contents. We should take vigorous action to the research work of scientific and technological information, changing the information directional service into knowledge providing service. (authors)

  4. Technologies enabling autologous neural stem cell-based therapies for neurodegenerative disease and injury

    Science.gov (United States)

    Bakhru, Sasha H.

    The intrinsic abilities of mammalian neural stem cells (NSCs) to self-renew, migrate over large distances, and give rise to all primary neural cell types of the brain offer unprecedented opportunity for cell-based treatment of neurodegenerative diseases and injuries. This thesis discusses development of technologies in support of autologous NSC-based therapies, encompassing harvest of brain tissue biopsies from living human patients; isolation of NSCs from harvested tissue; efficient culture and expansion of NSCs in 3D polymeric microcapsule culture systems; optimization of microcapsules as carriers for efficient in vivo delivery of NSCs; genetic engineering of NSCs for drug-induced, enzymatic release of transplanted NSCs from microcapsules; genetic engineering for drug-induced differentiation of NSCs into specific therapeutic cell types; and synthesis of chitosan/iron-oxide nanoparticles for labeling of NSCs and in vivo tracking by cellular MRI. Sub-millimeter scale tissue samples were harvested endoscopically from subventricular zone regions of living patient brains, secondary to neurosurgical procedures including endoscopic third ventriculostomy and ventriculoperitoneal shunt placement. On average, 12,000 +/- 3,000 NSCs were isolated per mm 3 of subventricular zone tissue, successfully demonstrated in 26 of 28 patients, ranging in age from one month to 68 years. In order to achieve efficient expansion of isolated NSCs to clinically relevant numbers (e.g. hundreds of thousands of cells in Parkinson's disease and tens of millions of cells in multiple sclerosis), an extracellular matrix-inspired, microcapsule-based culture platform was developed. Initial culture experiments with murine NSCs yielded unprecedented expansion folds of 30x in 5 days, from initially minute NSC populations (154 +/- 15 NSCs per 450 mum diameter capsule). Within 7 days, NSCs expanded as almost perfectly homogenous populations, with 94.9% +/- 4.1% of cultured cells staining positive for

  5. Enabling Technologies for Entrepreneurial Opportunities in 3D printing of SmallSats

    Science.gov (United States)

    Kwas, Andrew; MacDonald, Eric; Muse, Dan; Wicker, Ryan; Kief, Craig; Aarestad, Jim; Zemba, Mike; Marshall, Bill; Tolbert, Carol; Connor, Brett

    2014-01-01

    A consortium of innovative experts in additive manufacturing (AM) comprising Northrup Grumman Technical Services, University of Texas at El Paso (UTEP), Configurable Space Microsystems Innovations & Applications Center (COSMIAC), NASA Glenn Research Center (GRC), and Youngstown State University, have made significant breakthroughs in the goal of creating the first complete 3D printed small satellite. Since AM machines are relatively inexpensive, this should lead to many entrepreneurial opportunities for the small satellite community. Our technology advancements are focused on the challenges of embedding key components within the structure of the article. We have demonstrated, using advanced fused deposition modeling techniques, complex geometric shapes which optimize the spacecraft design. The UTEP Keck Center has developed a method that interrupts the printing process to insert components into specific cavities, resulting in a spacecraft that has minimal internal space allocated for what traditionally were functional purposes. This allows us to increase experiment and instrument capability by provided added volume in a confined small satellite space. Leveraging initial progress made on a NASA contract, the team investigated the potential of new materials that exploit the AM process, producing candidate compositions that exceed the capabilities of traditional materials. These "new materials" being produced and tested include some that have improved radiation shielding, increased permeability, enhanced thermal properties, better conductive properties, and increased structural performance. The team also investigated materials that were previously not possible to be made. Our testing included standard mechanical tests such as vibration, tensile, thermal cycling, and impact resistance as well as radiation and electromagnetic tests. The initial results of these products and their performance will be presented and compared with standard properties. The new materials with

  6. High-power fused assemblies enabled by advances in fiber-processing technologies

    Science.gov (United States)

    Wiley, Robert; Clark, Brett

    2011-02-01

    The power handling capabilities of fiber lasers are limited by the technologies available to fabricate and assemble the key optical system components. Previous tools for the assembly, tapering, and fusion of fiber laser elements have had drawbacks with regard to temperature range, alignment capability, assembly flexibility and surface contamination. To provide expanded capabilities for fiber laser assembly, a wide-area electrical plasma heat source was used in conjunction with an optimized image analysis method and a flexible alignment system, integrated according to mechatronic principles. High-resolution imaging and vision-based measurement provided feedback to adjust assembly, fusion, and tapering process parameters. The system was used to perform assembly steps including dissimilar-fiber splicing, tapering, bundling, capillary bundling, and fusion of fibers to bulk optic devices up to several mm in diameter. A wide range of fiber types and diameters were tested, including extremely large diameters and photonic crystal fibers. The assemblies were evaluated for conformation to optical and mechanical design criteria, such as taper geometry and splice loss. The completed assemblies met the performance targets and exhibited reduced surface contamination compared to assemblies prepared on previously existing equipment. The imaging system and image analysis algorithms provided in situ fiber geometry measurement data that agreed well with external measurement. The ability to adjust operating parameters dynamically based on imaging was shown to provide substantial performance benefits, particularly in the tapering of fibers and bundles. The integrated design approach was shown to provide sufficient flexibility to perform all required operations with a minimum of reconfiguration.

  7. New Cloud and Precipitation Research Avenues Enabled by low-cost Phased-array Radar Technology

    Science.gov (United States)

    Kollias, P.; Oue, M.; Fridlind, A. M.; Matsui, T.; McLaughlin, D. J.

    2017-12-01

    For over half a century, radars operating in a wide range of frequencies have been the primary source of observational insights of clouds and precipitation microphysics and dynamics and contributed to numerous significant advancements in the field of cloud and precipitation physics. The development of multi-wavelength and polarization diversity techniques has further strengthened the quality of microphysical and dynamical retrievals from radars and has assisted in overcoming some of the limitations imposed by the physics of scattering. Atmospheric radars have historically employed a mechanically-scanning dish antenna and their ability to point to, survey, and revisit specific points or regions in the atmosphere is limited by mechanical inertia. Electronically scanned, or phased-array, radars capable of high-speed, inertialess beam steering, have been available for several decades, but the cost of this technology has limited its use to military applications. During the last 10 years, lower power and lower-cost versions of electronically scanning radars have been developed, and this presents an attractive and affordable new tool for the atmospheric sciences. The operational and research communities are currently exploring phased array advantages in signal processing (i.e. beam multiplexing, improved clutter rejection, cross beam wind estimation, adaptive sensing) and science applications (i.e. tornadic storm morphology studies). Here, we will present some areas of atmospheric research where inertia-less radars with ability to provide rapid volume imaging offers the potential to advance cloud and precipitation research. We will discuss the added value of single phased-array radars as well as networks of these radars for several problems including: multi-Doppler wind retrieval techniques, cloud lifetime studies and aerosol-convection interactions. The performance of current (dish) and future (e-scan) radar systems for these atmospheric studies will be evaluated using

  8. Quantifying the Impacts of Timebased Rates, Enabling Technology, and Other Treatments in Consumer Behavior Studies: Protocols and Guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Cappers, Peter [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Todd, Annika [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Perry, Michael [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Neenan, Bernie [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Boisvert, Richard [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

    2013-06-27

    This report offers guidelines and protocols for measuring the effects of time-based rates, enabling technology, and various other treatments on customers’ levels and patterns of electricity usage. Although the focus is on evaluating consumer behavior studies (CBS) that involve field trials and pilots, the methods can be extended to assessing the large-scale programs that may follow. CBSs are undertaken to resolve uncertainties and ambiguities about how consumers respond to inducements to modify their electricity demand. Those inducements include price structures; feedback and information; and enabling technologies embedded in programs such as: critical peak, time-of use, real-time pricing; peak time rebate or critical peak rebate; home energy reports and in-home displays; and all manner of device controls for appliances and plug loads. Although the focus of this report is on consumer studies—where the subjects are households—the behavioral sciences principles discussed and many of the methods recommended apply equally to studying commercial and industrial customer electricity demand.

  9. Cloud Engineering Principles and Technology Enablers for Medical Image Processing-as-a-Service

    Science.gov (United States)

    Bao, Shunxing; Plassard, Andrew J.; Landman, Bennett A.; Gokhale, Aniruddha

    2017-01-01

    Traditional in-house, laboratory-based medical imaging studies use hierarchical data structures (e.g., NFS file stores) or databases (e.g., COINS, XNAT) for storage and retrieval. The resulting performance from these approaches is, however, impeded by standard network switches since they can saturate network bandwidth during transfer from storage to processing nodes for even moderate-sized studies. To that end, a cloud-based “medical image processing-as-a-service” offers promise in utilizing the ecosystem of Apache Hadoop, which is a flexible framework providing distributed, scalable, fault tolerant storage and parallel computational modules, and HBase, which is a NoSQL database built atop Hadoop’s distributed file system. Despite this promise, HBase’s load distribution strategy of region split and merge is detrimental to the hierarchical organization of imaging data (e.g., project, subject, session, scan, slice). This paper makes two contributions to address these concerns by describing key cloud engineering principles and technology enhancements we made to the Apache Hadoop ecosystem for medical imaging applications. First, we propose a row-key design for HBase, which is a necessary step that is driven by the hierarchical organization of imaging data. Second, we propose a novel data allocation policy within HBase to strongly enforce collocation of hierarchically related imaging data. The proposed enhancements accelerate data processing by minimizing network usage and localizing processing to machines where the data already exist. Moreover, our approach is amenable to the traditional scan, subject, and project-level analysis procedures, and is compatible with standard command line/scriptable image processing software. Experimental results for an illustrative sample of imaging data reveals that our new HBase policy results in a three-fold time improvement in conversion of classic DICOM to NiFTI file formats when compared with the default HBase region split

  10. Cloud Engineering Principles and Technology Enablers for Medical Image Processing-as-a-Service.

    Science.gov (United States)

    Bao, Shunxing; Plassard, Andrew J; Landman, Bennett A; Gokhale, Aniruddha

    2017-04-01

    Traditional in-house, laboratory-based medical imaging studies use hierarchical data structures (e.g., NFS file stores) or databases (e.g., COINS, XNAT) for storage and retrieval. The resulting performance from these approaches is, however, impeded by standard network switches since they can saturate network bandwidth during transfer from storage to processing nodes for even moderate-sized studies. To that end, a cloud-based "medical image processing-as-a-service" offers promise in utilizing the ecosystem of Apache Hadoop, which is a flexible framework providing distributed, scalable, fault tolerant storage and parallel computational modules, and HBase, which is a NoSQL database built atop Hadoop's distributed file system. Despite this promise, HBase's load distribution strategy of region split and merge is detrimental to the hierarchical organization of imaging data (e.g., project, subject, session, scan, slice). This paper makes two contributions to address these concerns by describing key cloud engineering principles and technology enhancements we made to the Apache Hadoop ecosystem for medical imaging applications. First, we propose a row-key design for HBase, which is a necessary step that is driven by the hierarchical organization of imaging data. Second, we propose a novel data allocation policy within HBase to strongly enforce collocation of hierarchically related imaging data. The proposed enhancements accelerate data processing by minimizing network usage and localizing processing to machines where the data already exist. Moreover, our approach is amenable to the traditional scan, subject, and project-level analysis procedures, and is compatible with standard command line/scriptable image processing software. Experimental results for an illustrative sample of imaging data reveals that our new HBase policy results in a three-fold time improvement in conversion of classic DICOM to NiFTI file formats when compared with the default HBase region split policy

  11. Reusable launch vehicles, enabling technology for the development of advanced upper stages and payloads

    International Nuclear Information System (INIS)

    Metzger, John D.

    1998-01-01

    In the near future there will be classes of upper stages and payloads that will require initial operation at a high-earth orbit to reduce the probability of an inadvertent reentry that could result in a detrimental impact on humans and the biosphere. A nuclear propulsion system, such as was being developed under the Space Nuclear Thermal Propulsion (SNTP) Program, is an example of such a potential payload. This paper uses the results of a reusable launch vehicle (RLV) study to demonstrate the potential importance of a Reusable Launch Vehicle (RLV) to test and implement an advanced upper stage (AUS) or payload in a safe orbit and in a cost effective and reliable manner. The RLV is a horizontal takeoff and horizontal landing (HTHL), two-stage-to-orbit (TSTO) vehicle. The results of the study shows that an HTHL is cost effective because it implements airplane-like operation, infrastructure, and flight operations. The first stage of the TSTO is powered by Rocket-Based-Combined-Cycle (RBCC) engines, the second stage is powered by a LOX/LH rocket engine. The TSTO is used since it most effectively utilizes the capability of the RBCC engine. The analysis uses the NASA code POST (Program to Optimize Simulated Trajectories) to determine trajectories and weight in high-earth orbit for AUS/advanced payloads. Cost and reliability of an RLV versus current generation expandable launch vehicles are presented

  12. Technological Criteria Technology-Environmental under a Systemic Approach: Chemistry Technology Transfer

    OpenAIRE

    Durán-García Martín Enrique

    2014-01-01

    Currently the transfer of chemical technology is a process that contributes to the technology policy of a country, an industry or an organization in general chemistry. This process requires the application of clear criteria for the proper development of the complex interrelations in the transfer of chemical technology. A group of criteria that are present, are those related to environmental technology which intrinsically define the technology and its impact to the environment. Therefore, the ...

  13. The emerging Web 2.0 social software: an enabling suite of sociable technologies in health and health care education.

    Science.gov (United States)

    Kamel Boulos, Maged N; Wheeler, Steve

    2007-03-01

    Web 2.0 sociable technologies and social software are presented as enablers in health and health care, for organizations, clinicians, patients and laypersons. They include social networking services, collaborative filtering, social bookmarking, folksonomies, social search engines, file sharing and tagging, mashups, instant messaging, and online multi-player games. The more popular Web 2.0 applications in education, namely wikis, blogs and podcasts, are but the tip of the social software iceberg. Web 2.0 technologies represent a quite revolutionary way of managing and repurposing/remixing online information and knowledge repositories, including clinical and research information, in comparison with the traditional Web 1.0 model. The paper also offers a glimpse of future software, touching on Web 3.0 (the Semantic Web) and how it could be combined with Web 2.0 to produce the ultimate architecture of participation. Although the tools presented in this review look very promising and potentially fit for purpose in many health care applications and scenarios, careful thinking, testing and evaluation research are still needed in order to establish 'best practice models' for leveraging these emerging technologies to boost our teaching and learning productivity, foster stronger 'communities of practice', and support continuing medical education/professional development (CME/CPD) and patient education.

  14. Enabling inspection solutions for future mask technologies through the development of massively parallel E-Beam inspection

    Science.gov (United States)

    Malloy, Matt; Thiel, Brad; Bunday, Benjamin D.; Wurm, Stefan; Jindal, Vibhu; Mukhtar, Maseeh; Quoi, Kathy; Kemen, Thomas; Zeidler, Dirk; Eberle, Anna Lena; Garbowski, Tomasz; Dellemann, Gregor; Peters, Jan Hendrik

    2015-09-01

    The new device architectures and materials being introduced for sub-10nm manufacturing, combined with the complexity of multiple patterning and the need for improved hotspot detection strategies, have pushed current wafer inspection technologies to their limits. In parallel, gaps in mask inspection capability are growing as new generations of mask technologies are developed to support these sub-10nm wafer manufacturing requirements. In particular, the challenges associated with nanoimprint and extreme ultraviolet (EUV) mask inspection require new strategies that enable fast inspection at high sensitivity. The tradeoffs between sensitivity and throughput for optical and e-beam inspection are well understood. Optical inspection offers the highest throughput and is the current workhorse of the industry for both wafer and mask inspection. E-beam inspection offers the highest sensitivity but has historically lacked the throughput required for widespread adoption in the manufacturing environment. It is unlikely that continued incremental improvements to either technology will meet tomorrow's requirements, and therefore a new inspection technology approach is required; one that combines the high-throughput performance of optical with the high-sensitivity capabilities of e-beam inspection. To support the industry in meeting these challenges SUNY Poly SEMATECH has evaluated disruptive technologies that can meet the requirements for high volume manufacturing (HVM), for both the wafer fab [1] and the mask shop. Highspeed massively parallel e-beam defect inspection has been identified as the leading candidate for addressing the key gaps limiting today's patterned defect inspection techniques. As of late 2014 SUNY Poly SEMATECH completed a review, system analysis, and proof of concept evaluation of multiple e-beam technologies for defect inspection. A champion approach has been identified based on a multibeam technology from Carl Zeiss. This paper includes a discussion on the

  15. Endogenous technological and demographic change under increasing water scarcity

    Science.gov (United States)

    Pande, Saket; Ertsen, Maurits; Sivapalan, Murugesu

    2014-05-01

    The ancient civilization in the Indus Valley civilization dispersed under extreme dry conditions; there are indications that the same holds for many other ancient societies. Even contemporary societies, such as the one in Murrumbidgee river basin in Australia, have started to witness a decline in overall population under increasing water scarcity. Hydroclimatic change may not be the sole predictor of the fate of contemporary societies in water scarce regions and many critics of such (perceived) hydroclimatic determinism have suggested that technological change may ameliorate the effects of increasing water scarcity and as such counter the effects of hydroclimatic changes. To study the role of technological change on the dynamics of coupled human-water systems, we develop a simple overlapping-generations model of endogenous technological and demographic change. We model technological change as an endogenous process that depends on factors such as the investments that are (endogenously) made in a society, the (endogenous) diversification of a society into skilled and unskilled workers, a society's patience in terms of its present consumption vs. future consumption, production technology and the (endogenous) interaction of all of these factors. In the model the population growth rate is programmed to decline once consumption per capita crosses a "survival" threshold. This means we do not treat technology as an exogenous random sequence of events, but instead assume that it results (endogenously) from societal actions. The model demonstrates that technological change may indeed ameliorate the effects of increasing water scarcity but typically it does so only to a certain extent. It is possible that technological change may allow a society to escape the effect of increasing water scarcity, leading to a (super)-exponential rise in technology and population. However, such cases require the rate of success of investment in technological advancement to be high. In other

  16. Endogenous technological and population change under increasing water scarcity

    Science.gov (United States)

    Pande, S.; Ertsen, M.; Sivapalan, M.

    2013-11-01

    The ancient civilization in the Indus Valley civilization dispersed under extreme dry conditions; there are indications that the same holds for many other ancient societies. Even contemporary societies, such as the one in Murrumbidgee river basin in Australia, have started to witness a decline in overall population under increasing water scarcity. Hydroclimatic change may not be the sole predictor of the fate of contemporary societies in water scarce regions and many critics of such (perceived) hydroclimatic determinism have suggested that technological change may ameliorate the effects of increasing water scarcity and as such counter the effects of hydroclimatic changes. To study the role of technological change on the dynamics of coupled human-water systems, we develop a simple overlapping-generations model of endogenous technological and demographic change. We model technological change as an endogenous process that depends on factors such as the investments that are (endogenously) made in a society, the (endogenous) diversification of a society into skilled and unskilled workers, a society's patience in terms of its present consumption vs. future consumption, production technology and the (endogenous) interaction of all of these factors. In the model the population growth rate is programmed to decline once consumption per capita crosses a "survival" threshold. This means we do not treat technology as an exogenous random sequence of events, but instead assume that it results (endogenously) from societal actions. The model demonstrates that technological change may indeed ameliorate the effects of increasing water scarcity but typically it does so only to a certain extent. It is possible that technological change may allow a society to escape the effect of increasing water scarcity, leading to a (super)-exponential rise in technology and population. However, such cases require the rate of success of investment in technological advancement to be high. In other

  17. A SmallSat Approach for Global Imaging Spectroscopy of the Earth SYSTEM Enabled by Advanced Technology

    Science.gov (United States)

    Green, R. O.; Asner, G. P.; Thompson, D. R.; Mouroulis, P.; Eastwood, M. L.; Chien, S.

    2017-12-01

    Global coverage imaging spectroscopy in the solar reflected energy portion of the spectrum has been identified by the Earth Decadal Survey as an important measurement that enables a diverse set of new and time critical science objectives/targets for the Earth system. These science objectives include biodiversity; ecosystem function; ecosystem biogeochemistry; initialization and constraint of global ecosystem models; fire fuel, combustion, burn severity, and recovery; surface mineralogy, geochemistry, geologic processes, soils, and hazards; global mineral dust source composition; cryospheric albedo, energy balance, and melting; coastal and inland water habitats; coral reefs; point source gas emission; cloud thermodynamic phase; urban system properties; and more. Traceability of these science objectives to spectroscopic measurement in the visible to short wavelength infrared portion of the spectrum is summarized. New approaches, including satellite constellations, to acquire these global imaging spectroscopy measurements is presented drawing from recent advances in optical design, detector technology, instrument architecture, thermal control, on-board processing, data storage, and downlink.

  18. Enabling renewable energy and energy efficiency technologies. Opportunities in Eastern Europe, Caucasus, Central Asia, Southern and Eastern Mediterranean

    Energy Technology Data Exchange (ETDEWEB)

    Barnsley, Ingrid; Blank, Amanda; Brown, Adam

    2015-06-01

    The increased deployment of renewable energy and energy efficiency technologies (RE&EET) in the South Eastern Mediterranean (SEMED) region and in the Early Transition Countries (ETC) could bring a host of benefits, including enhanced energy security, increased national revenues and environmental gains. A new IEA Insights paper considers policy options for supporting the deployment of RE&EET, as well as the surrounding factors that can enable – or indeed impede – the successful implementation of such support policies in both regions. Drawing on a wealth of IEA analyses and policy experiences globally, the paper: provides a summary of the energy profiles of the ETC and SEMED regions; highlights overarching, ''enabling'' factors that can help to set the necessary foundations for the successful implementation of policy to support RE&EET deployment; analyses policy options for both RE and EE, drawing on practical examples and highlighting indicative policies that correspond with varying levels of market maturity; and provides a checklist for assessing the level of supportiveness of national policy frameworks for RE&EET. The paper concludes by pointing to the significant potential for energy efficiency and renewable energy gains in both regions.

  19. FLUKA-LIVE-an embedded framework, for enabling a computer to execute FLUKA under the control of a Linux OS

    International Nuclear Information System (INIS)

    Cohen, A.; Battistoni, G.; Mark, S.

    2008-01-01

    This paper describes a Linux-based OS framework for integrating the FLUKA Monte Carlo software (currently distributed only for Linux) into a CD-ROM, resulting in a complete environment for a scientist to edit, link and run FLUKA routines-without the need to install a UNIX/Linux operating system. The building process includes generating from scratch a complete operating system distribution which will, when operative, build all necessary components for successful operation of FLUKA software and libraries. Various source packages, as well as the latest kernel sources, are freely available from the Internet. These sources are used to create a functioning Linux system that integrates several core utilities in line with the main idea-enabling FLUKA to act as if it was running under a popular Linux distribution or even a proprietary UNIX workstation. On boot-up a file system will be created and the contents from the CD will be uncompressed and completely loaded into RAM-after which the presence of the CD is no longer necessary, and could be removed for use on a second computer. The system can operate on any i386 PC as long as it can boot from a CD

  20. Use of eHealth technologies to enable the implementation of musculoskeletal Models of Care: Evidence and practice.

    Science.gov (United States)

    Slater, Helen; Dear, Blake F; Merolli, Mark A; Li, Linda C; Briggs, Andrew M

    2016-06-01

    Musculoskeletal (MSK) conditions are the second leading cause of morbidity-related burden of disease globally. EHealth is a potentially critical factor that enables the implementation of accessible, sustainable and more integrated MSK models of care (MoCs). MoCs serve as a vehicle to drive evidence into policy and practice through changes at a health system, clinician and patient level. The use of eHealth to implement MoCs is intuitive, given the capacity to scale technologies to deliver system and economic efficiencies, to contribute to sustainability, to adapt to low-resource settings and to mitigate access and care disparities. We follow a practice-oriented approach to describing the 'what' and 'how' to harness eHealth in the implementation of MSK MoCs. We focus on the practical application of eHealth technologies across care settings to those MSK conditions contributing most substantially to the burden of disease, including osteoarthritis and inflammatory arthritis, skeletal fragility-associated conditions and persistent MSK pain. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  1. malERA: An updated research agenda for basic science and enabling technologies in malaria elimination and eradication

    Science.gov (United States)

    2017-01-01

    Basic science holds enormous power for revealing the biological mechanisms of disease and, in turn, paving the way toward new, effective interventions. Recognizing this power, the 2011 Research Agenda for Malaria Eradication included key priorities in fundamental research that, if attained, could help accelerate progress toward disease elimination and eradication. The Malaria Eradication Research Agenda (malERA) Consultative Panel on Basic Science and Enabling Technologies reviewed the progress, continuing challenges, and major opportunities for future research. The recommendations come from a literature of published and unpublished materials and the deliberations of the malERA Refresh Consultative Panel. These areas span multiple aspects of the Plasmodium life cycle in both the human host and the Anopheles vector and include critical, unanswered questions about parasite transmission, human infection in the liver, asexual-stage biology, and malaria persistence. We believe an integrated approach encompassing human immunology, parasitology, and entomology, and harnessing new and emerging biomedical technologies offers the best path toward addressing these questions and, ultimately, lowering the worldwide burden of malaria. PMID:29190277

  2. Vehicle technology under CO2 constraint: a general equilibrium analysis

    International Nuclear Information System (INIS)

    Schaefer, Andreas; Jacoby, Henry D.

    2006-01-01

    A study is presented of the rates of penetration of different transport technologies under policy constraints on CO 2 emissions. The response of this sector is analyzed within an overall national level of restriction, with a focus on automobiles, light trucks, and heavy freight trucks. Using the US as an example, a linked set of three models is used to carry out the analysis: a multi-sector computable general equilibrium model of the economy, a MARKAL-type model of vehicle and fuel supply technology, and a model simulating the split of personal and freight transport among modes. Results highlight the importance of incremental improvements in conventional internal combustion engine technology, and, in the absence of policies to overcome observed consumer discount rates, the very long time horizons before radical alternatives like the internal combustion engine hybrid drive train vehicle are likely to take substantial market share

  3. DOE's SciDAC Visualization and Analytics Center for EnablingTechnologies -- Strategy for Petascale Visual Data Analysis Success

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, E Wes; Johnson, Chris; Aragon, Cecilia; Rubel, Oliver; Weber, Gunther; Pascucci, Valerio; Childs, Hank; Bremer, Peer-Timo; Whitlock, Brad; Ahern, Sean; Meredith, Jeremey; Ostrouchov, George; Joy, Ken; Hamann, Bernd; Garth, Christoph; Cole, Martin; Hansen, Charles; Parker, Steven; Sanderson, Allen; Silva, Claudio; Tricoche, Xavier

    2007-10-01

    The focus of this article is on how one group of researchersthe DOE SciDAC Visualization and Analytics Center for EnablingTechnologies (VACET) is tackling the daunting task of enabling knowledgediscovery through visualization and analytics on some of the world slargest and most complex datasets and on some of the world's largestcomputational platforms. As a Center for Enabling Technology, VACET smission is the creation of usable, production-quality visualization andknowledge discovery software infrastructure that runs on large, parallelcomputer systems at DOE's Open Computing facilities and that providessolutions to challenging visual data exploration and knowledge discoveryneeds of modern science, particularly the DOE sciencecommunity.

  4. Efficient climate policies under technology and climate uncertainty

    International Nuclear Information System (INIS)

    Held, Hermann; Kriegler, Elmar; Lessmann, Kai; Edenhofer, Ottmar

    2009-01-01

    This article explores efficient climate policies in terms of investment streams into fossil and renewable energy technologies. The investment decisions maximise social welfare while observing a probabilistic guardrail for global mean temperature rise under uncertain technology and climate parameters. Such a guardrail constitutes a chance constraint, and the resulting optimisation problem is an instance of chance constrained programming, not stochastic programming as often employed. Our analysis of a model of economic growth and endogenous technological change, MIND, suggests that stringent mitigation strategies cannot guarantee a very high probability of limiting warming to 2 o C since preindustrial time under current uncertainty about climate sensitivity and climate response time scale. Achieving the 2 o C temperature target with a probability P* of 75% requires drastic carbon dioxide emission cuts. This holds true even though we have assumed an aggressive mitigation policy on other greenhouse gases from, e.g., the agricultural sector. The emission cuts are deeper than estimated from a deterministic calculation with climate sensitivity fixed at the P* quantile of its marginal probability distribution (3.6 o C). We show that earlier and cumulatively larger investments into the renewable sector are triggered by including uncertainty in the technology and climate response time scale parameters. This comes at an additional GWP loss of 0.3%, resulting in a total loss of 0.8% GWP for observing the chance constraint. We obtained those results with a new numerical scheme to implement constrained welfare optimisation under uncertainty as a chance constrained programming problem in standard optimisation software such as GAMS. The scheme is able to incorporate multivariate non-factorial probability measures such as given by the joint distribution of climate sensitivity and response time. We demonstrate the scheme for the case of a four-dimensional parameter space capturing

  5. Applying Registry Services to Spaceflight Technologies to Aid in the Assignment of Assigned Numbers to Disparate Systems and their Technologies to Further Enable Interoperability

    Science.gov (United States)

    Bradford, Robert N.; Nichols, Kelvin F.; Witherspoon, Keith R.

    2006-01-01

    technologies will be those that are currently in need of expansion namely the assignment of satellite designations and the process which controls assignments. Second, we will analyze the technologies currently standardized under the Consultative Committee for Space Data Systems (CCSDS) banner. Third, we will analyze the current CCSDS working group and Birds of a Feather (BoF) activities to ascertain registry requirements. Lastly, we will identify technologies that are either currently under the auspices of another standards body or technologies that are currently not standardized. For activities one through three, we will provide the analysis by either discipline or technology with rationale, identification and brief description of requirements and precedence. For activity four, we will provide a list of current standards bodies e.g. IETF and a list of potential candidates.

  6. Enabling technologies for millimeter-wave radio-over-fiber systems in next generation heterogeneous mobile access networks

    Science.gov (United States)

    Zhang, Junwen; Yu, Jianjun; Wang, Jing; Xu, Mu; Cheng, Lin; Lu, Feng; Shen, Shuyi; Yan, Yan; Cho, Hyunwoo; Guidotti, Daniel; Chang, Gee-kung

    2017-01-01

    Fifth-generation (5G) wireless access network promises to support higher access data rate with more than 1,000 times capacity with respect to current long-term evolution (LTE) systems. New radio-access-technologies (RATs) based on higher carrier frequencies to millimeter-wave (MMW) radio-over-fiber, and carrier-aggregation (CA) using multi-band resources are intensively studied to support the high data rate access and effectively use of frequency resources in heterogeneous mobile network (Het-Net). In this paper, we investigate several enabling technologies for MMW RoF systems in 5G Het-Net. Efficient mobile fronthaul (MFH) solutions for 5G centralized radio access network (C-RAN) and beyond are proposed, analyzed and experimentally demonstrated based on the analog scheme. Digital predistortion based on memory polynomial for analog MFH linearization are presented with improved EVM performances and receiver sensitivity. We also propose and experimentally demonstrate a novel inter-/intra- RAT CA scheme for 5G Het- Net. The real-time standard 4G-LTE signal is carrier-aggregated with three broadband 60GHz MMW signals based on proposed optical-domain band-mapping method. RATs based on new waveforms have also been studied here to achieve higher spectral-efficiency (SE) in asynchronous environments. Full-duplex asynchronous quasi-gapless carrier aggregation scheme for MMW ROF inter-/intra-RAT based on the FBMC is also presented with 4G-LTE signals. Compared with OFDM-based signals with large guard-bands, FBMC achieves higher spectral-efficiency with better EVM performance at less received power and smaller guard-bands.

  7. Information technology as a key enabler in preparing for competition: ComEd's Kincaid Generating Station, a work in progress

    International Nuclear Information System (INIS)

    Borth, F.C. III; Thompson, J.W.; Mishaga, J.M.

    1996-01-01

    Through ComEd Fossil (Generating) Division's Competitive Action Plan (CAP) evaluation changes have been identified which are necessary to improve generating station performance. These changes are intended to improve both station reliability and financial margins, and are essential for stations to be successful in a competitive marketplace. Plant upgrades, advanced equipment stewardship, and personnel reductions have been identified as necessary steps in achieving industry leadership and competitive advantage. To deal effectively with plant systems and contend in the competitive marketplace Information Technology (IT) solutions to business problems are being developed. Data acquisition, storage, and retrieval are being automated through use of state-of-the-art Data Historians. Total plant, high resolution, long term process information will be accessed through Local/Wide Area Networks (LAN/WAN) connections from desktop PC's. Generating unit Thermal Performance Monitors accessing the Data Historian will analyze plant and system performance enabling reductions in operating costs, and improvements in process control. As inputs to proactive maintenance toolsets this data allows anticipation of equipment service needs, advanced service scheduling, and cost/benefit analysis. The ultimate goal is to optimize repair needs with revenue generation. Advanced applications building upon these foundations will bring knowledge of the costs associated with all the products a generating station offers its customer(s). An overall design philosophy along with preliminary results is presented; these results include shortfalls, lessons learned, and future options

  8. The use of smart technologies in enabling construction components reuse: A viable method or a problem creating solution?

    Science.gov (United States)

    Iacovidou, Eleni; Purnell, Phil; Lim, Ming K

    2018-06-15

    The exploitation of Radio Frequency Identification (RFID) for tracking and archiving the properties of structural construction components could be a potentially innovative disruption for the construction sector. This is because RFID can stimulate the reuse of construction components and reduce their wastage, hence addressing sustainability issues in the construction sector. To test the plausibility of that idea, this study explores the potential pre-conditions for RFID to facilitate construction components reuse, and develops a guidance for promoting their redistribution back to the supply chain. It also looks at how integrating RFID with Building Information Modelling (BIM) can possibly be a valuable extension of its capabilities, providing the opportunity for tracked components to be incorporated into new structures in an informed, sound way. A preliminary assessment of the strengths, weaknesses, opportunities and threats of the RFID technology is presented in order to depict its current and future potential in promoting construction components' sustainable lifecycle management, while emphasis has been laid on capturing their technical, environmental, economic and social value. Findings suggest that the collection of the right amount of information at the design-construction-deconstruction-reuse-disposal stage is crucial for RFID to become a successful innovation in the construction sector. Although a number of limitations related to the technical operability and recycling of RFID tags seem to currently hinder its uptake for structural components' lifecycle management, future technological innovations could provide solutions that would enable it to become a mainstream practice. Taken together these proposals advocate that the use of RFID and its integration with BIM can create the right environment for the development of new business models focused on sustainable resource management. These models may then unlock multiple values that are otherwise dissipated in

  9. SOME RECENT TECHNOLOGY DEVELOPMENTS FROM THE UK'S NATIONAL NUCLEAR LABORATORY TO ENABLE HAZARD CHARACTERISATION FOR NUCLEAR DECOMMISSIONING APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, E.; Foley, T.

    2010-02-11

    Under its programme of self investment Internal Research and Development (IR&D), the UK's National Nuclear Laboratory (NNL) is addressing the requirement for development in technology to enable hazard characterisation for nuclear decommissioning applications. Three such examples are described here: (1) RadBall developed by the NNL (patent pending) is a deployable baseball-sized radiation mapping device which can, from a single location, locate and quantify radiation hazards. RadBall offers a means to collect information regarding the magnitude and distribution of radiation in a given cell, glovebox or room to support the development of a safe, cost effective decontamination strategy. RadBall requires no electrical supplies and is relatively small, making it easy to be deployed and used to map radiation hazards in hard to reach areas. Recent work conducted in partnership with the Savannah River National Laboratory (SRNL) is presented. (2) HiRAD (patent pending) has been developed by the NNL in partnership with Tracerco Ltd (UK). HiRAD is a real-time, remotely deployed, radiation detection device designed to operate in elevated levels of radiation (i.e. thousands and tens of thousands of Gray) as seen in parts of the nuclear industry. Like the RadBall technology, the HiRAD system does not require any electrical components, the small dimensions and flexibility of the device allow it to be positioned in difficult to access areas (such as pipe work). HiRAD can be deployed as a single detector, a chain, or as an array giving the ability to monitor large process areas. Results during the development and deployment of the technology are presented. (3) Wireless Sensor Network is a NNL supported development project led by the University of Manchester (UK) in partnership with Oxford University (UK). The project is concerned with the development of wireless sensor network technology to enable the underwater deployment and communication of miniaturised probes allowing pond

  10. Information and communication technology-enabled person-centered care for the "big five" chronic conditions: scoping review.

    Science.gov (United States)

    Wildevuur, Sabine E; Simonse, Lianne W L

    2015-03-27

    Person-centered information and communication technology (ICT) could encourage patients to take an active part in their health care and decision-making process, and make it possible for patients to interact directly with health care providers and services about their personal health concerns. Yet, little is known about which ICT interventions dedicated to person-centered care (PCC) and connected-care interactions have been studied, especially for shared care management of chronic diseases. The aim of this research is to investigate the extent, range, and nature of these research activities and identify research gaps in the evidence base of health studies regarding the "big 5" chronic diseases: diabetes mellitus, cardiovascular disease, chronic respiratory disease, cancer, and stroke. The objective of this paper was to review the literature and to scope the field with respect to 2 questions: (1) which ICT interventions have been used to support patients and health care professionals in PCC management of the big 5 chronic diseases? and (2) what is the impact of these interventions, such as on health-related quality of life and cost efficiency? This research adopted a scoping review method. Three electronic medical databases were accessed: PubMed, EMBASE, and Cochrane Library. The research reviewed studies published between January 1989 and December 2013. In 5 stages of systematic scanning and reviewing, relevant studies were identified, selected, and charted. Then we collated, summarized, and reported the results. From the initial 9380 search results, we identified 350 studies that qualified for inclusion: diabetes mellitus (n=103), cardiovascular disease (n=89), chronic respiratory disease (n=73), cancer (n=67), and stroke (n=18). Persons with one of these chronic conditions used ICT primarily for self-measurement of the body, when interacting with health care providers, with the highest rates of use seen in chronic respiratory (63%, 46/73) and cardiovascular (53

  11. eSensor: an electrochemical detection-based DNA microarray technology enabling sample-to-answer molecular diagnostics

    Science.gov (United States)

    Liu, Robin H.; Longiaru, Mathew

    2009-05-01

    DNA microarrays are becoming a widespread tool used in life science and drug screening due to its many benefits of miniaturization and integration. Microarrays permit a highly multiplexed DNA analysis. Recently, the development of new detection methods and simplified methodologies has rapidly expanded the use of microarray technologies from predominantly gene expression analysis into the arena of diagnostics. Osmetech's eSensor® is an electrochemical detection platform based on a low-to- medium density DNA hybridization array on a cost-effective printed circuit board substrate. eSensor® has been cleared by FDA for Warfarin sensitivity test and Cystic Fibrosis Carrier Detection. Other genetic-based diagnostic and infectious disease detection tests are under development. The eSensor® platform eliminates the need for an expensive laser-based optical system and fluorescent reagents. It allows one to perform hybridization and detection in a single and small instrument without any fluidic processing and handling. Furthermore, the eSensor® platform is readily adaptable to on-chip sample-to-answer genetic analyses using microfluidics technology. The eSensor® platform provides a cost-effective solution to direct sample-to-answer genetic analysis, and thus have a potential impact in the fields of point-of-care genetic analysis, environmental testing, and biological warfare agent detection.

  12. Role of innovative technologies under the global zero emissions scenarios

    International Nuclear Information System (INIS)

    Tokimatsu, Koji; Konishi, Satoshi; Ishihara, Keiichi; Tezuka, Tetsuo; Yasuoka, Rieko; Nishio, Masahiro

    2016-01-01

    Highlights: • We modeled a zero emissions scenario based on the A1T scenario of IPCC-SRES. • We conducted global modeling by minimizing costs of energy, biomass, and materials. • A variety of advanced technology innovations were considered and incorporated. • Results suggest that zero emissions scenario may be possible in this century. • We revealed energy supply structure under the zero emissions scenarios. - Abstract: This study investigated zero emissions scenarios with following two originalities compared to various existing studies. One is that we based on A1T society of SRES (Special Report on Emissions Scenario) of IPCC (Intergovernmental Panel on Climate Change) compared to existing studies on those of B1 or B2. The second one is that various innovative technologies were considered and incorporated, such as biomass energy with carbon capture and storage (BECCS), and advanced nuclear technologies including hydrogen or synfuel production. We conducted global modeling over the period 2010–2150 in which energy, materials, and biomass and foods supply costs were minimized by linear programming. We found following features of energy supply structure in A1T scenario. Since the electric demand in A1T scenario in 2100 is two times larger than the others, (1) renewable energy which solely produce electricity, nuclear, and fossil energy with CCS (FECCS) especially coal are main sources of electricity, (2) renewable which can supply heat, namely BECCS and geothermal, satisfies the sector, and (3) hydrogen from coal is introduced in transport sector. It can be concluded that the zero emission energy systems with global economic growth will be possible, by development and deployment of ambitious advanced energy technologies.

  13. Technology-enabled academic detailing: computer-mediated education between pharmacists and physicians for evidence-based prescribing.

    Science.gov (United States)

    Ho, Kendall; Nguyen, Anne; Jarvis-Selinger, Sandra; Novak Lauscher, Helen; Cressman, Céline; Zibrik, Lindsay

    2013-09-01

    Academic detailing (AD) is the practice of specially trained pharmacists with detailed medication knowledge meeting with physicians to share best practices of prescribing. AD has demonstrated efficacy in positively influencing physicians' prescribing behavior. Nevertheless, a key challenge has been that physicians in rural and remote locations, or physicians who are time challenged, have limited ability to participate in face-to-face meetings with academic detailers, as these specially trained academic detailers are primarily urban-based and limited in numbers. To determine the feasibility of using information technologies to facilitate communication between academic detailers and physicians (known as Technology-Enabled Academic Detailing or TEAD) through a comparison to traditional face-to-face academic detailing (AD). Specifically, TEAD is compared to AD in terms of the ability to aid physicians in acquiring evidence-informed prescribing information on diabetes-related medications, measured in terms of time efficiency, satisfaction of both physicians and pharmacists, and quality of knowledge exchange. General Practitioner Physicians (n=105) and pharmacists (n=12) were recruited from across British Columbia. Pharmacists were trained to be academic detailers on diabetes medication usage. Physicians were assigned to one of four intervention groups to receive four academic detailing sessions from trained pharmacists. Intervention groups included: (1) AD only, (2) TEAD only, (3) TEAD crossed over to AD at midpoint, and (4) AD crossed over to TEAD at midpoint. Evaluation included physician-completed surveys before and after each session, pharmacist logs after each detailing session, interviews and focus groups with physicians and pharmacists at study completion, as well as a technical support log to record all phone calls and emails from physicians and pharmacists regarding any technical challenges during the TEAD sessions, or usage of the web portal. Because

  14. Building a global federation system for climate change research: the earth system grid center for enabling technologies (ESG-CET)

    International Nuclear Information System (INIS)

    Ananthakrishnan, R; Bernholdt, D E; Bharathi, S; Brown, D; Chen, M; Chervenak, A L; Cinquini, L; Drach, R; Foster, I T; Fox, P; Fraser, D; Halliday, K; Hankin, S; Jones, P; Kesselman, C; Middleton, D E; Schwidder, J; Schweitzer, R; Schuler, R; Shoshani, A; Siebenlist, F; Sim, A; Strand, W G; Wilhelmi, N; Su, M; Williams, D N

    2007-01-01

    The recent release of the Intergovernmental Panel on Climate Change (IPCC) 4th Assessment Report (AR4) has generated significant media attention. Much has been said about the US role in this report, which included significant support from the Department of Energy through the Scientific Discovery through Advanced Computing (SciDAC) and other Department of Energy (DOE) programs for climate model development and the production execution of simulations. The SciDAC-supported Earth System Grid Center for Enabling Technologies (ESG-CET) also played a major role in the IPCC AR4: all of the simulation data that went into the report was made available to climate scientists worldwide exclusively via the ESG-CET At the same time as the IPCC AR4 database was being developed, the National Center for Atmospheric Research (NCAR), a leading US climate science laboratory and a ESG participant, began publishing model runs from the Community Climate System Model (CCSM), and its predecessor the Parallel Coupled Model (PCM) through ESG In aggregate, ESG-CET provides seamless access to over 180 terabytes of distributed climate simulation data to over 6,000 registered users worldwide, who have taken delivery of more than 250 terabytes from the archive. Not only does this represent a substantial advance in scientific knowledge, it is also a major step forward in how we conduct the research process on a global scale. Moving forward, the next IPCC assessment report, AR5, will demand multi-site metadata federation for data discovery and cross-domain identity management for single sign-on of users in a more diverse federation enterprise environment. Towards this aim, ESG is leading the effort in the climate community towards standardization of material for the global federation of metadata, security, and data services required to standardize, analyze, and access data worldwide

  15. Technology for planning and scheduling under complex constraints

    Science.gov (United States)

    Alguire, Karen M.; Pedro Gomes, Carla O.

    1997-02-01

    Within the context of law enforcement, several problems fall into the category of planning and scheduling under constraints. Examples include resource and personnel scheduling, and court scheduling. In the case of court scheduling, a schedule must be generated considering available resources, e.g., court rooms and personnel. Additionally, there are constraints on individual court cases, e.g., temporal and spatial, and between different cases, e.g., precedence. Finally, there are overall objectives that the schedule should satisfy such as timely processing of cases and optimal use of court facilities. Manually generating a schedule that satisfies all of the constraints is a very time consuming task. As the number of court cases and constraints increases, this becomes increasingly harder to handle without the assistance of automatic scheduling techniques. This paper describes artificial intelligence (AI) technology that has been used to develop several high performance scheduling applications including a military transportation scheduler, a military in-theater airlift scheduler, and a nuclear power plant outage scheduler. We discuss possible law enforcement applications where we feel the same technology could provide long-term benefits to law enforcement agencies and their operations personnel.

  16. Variable use of standards-based IOS enabling technologies in Australian SMEs : an examination of deliberate and emergent decision making processes

    NARCIS (Netherlands)

    Power, Damien; Gruner, Richard L.

    Use of inter-organizational systems (IOS) is widely recognized as pivotal to organizational success. However, the nature of decision making processes regarding the adoption and use of IOS-enabling technologies has received little research attention. The authors explore approaches to decisionmaking

  17. The Combination Design of Enabling Technologies in Group Learning: New Study Support Service for Visually Impaired University Students

    Science.gov (United States)

    Tangsri, Chatcai; Na-Takuatoong, Onjaree; Sophatsathit, Peraphon

    2013-01-01

    This article aims to show how the process of new service technology-based development improves the current study support service for visually impaired university students. Numerous studies have contributed to improving assisted aid technology such as screen readers, the development and the use of audiobooks, and technology that supports individual…

  18. Technological Competitiveness of Ukraine under Conditions of a New Industrial Revolution and Development of Convergent Technologies

    Directory of Open Access Journals (Sweden)

    Matyushenko Igor Yu.

    2016-02-01

    Full Text Available The article considers the problem of increasing the technological competitiveness of Ukrainian enterprises under conditions of a new industrial revolution through the development and introduction of advanced converged technologies. The classification of industrial revolutions, namely, industrial, technological, information and Industry 4.0, is presented, and it has been determined that the key factor of the latter is cyber physical systems for introduction of the client-oriented “Internet of Things”. It has been justified that the formation of Industry 4.0 in developed countries will occur through advanced production technologies (APT, which main characteristics are technological substitution, automation, customization, localization and economic efficiency. It has been found that in 2020 the main priority APT will be: systems of production process control; multidimensional modeling of complex products; intelligent production systems and robotics; systems of creation and transformation (growing of material objects and 3D-printing; materials effective in creating perspective actuating devices (compositional and those that exhibit their properties in small-size structures. It has been proved that the recovery of Ukraine’s industry is not possible on the old industrial base, and the creation of a new industry based on APT of Industry 4.0 is possible in the following areas: ICT (primarily in the field of software development; new composite materials with specified properties; industrial nanobiotechnologies (biomedicine and pharmacy, new agricultural technologies; mathematical modeling for creation of intelligent production systems; space research and development (in particular, development of the first stages of heavy missiles. The necessity of elaborating state programs of competitiveness development on the basis of APT, foresight research oftechnology priorities, promoting high-tech exports in Ukraine has been substantiated.

  19. Planning nuclear energy centers under technological and demand uncertainty

    International Nuclear Information System (INIS)

    Meier, P.M.; Palmedo, P.F.

    1976-01-01

    The question considered is whether new nuclear power plants should be located in nuclear energy centers, or ''power parks'' with co-located fabrication and reprocessing facilities. That issue has been addressed in a recent study by the Nuclear Regulatory Commission and remains under investigation at Brookhaven and elsewhere. So far, however, the advisability of this policy has been analyzed primarily within the framework of a single view of the future. Suggestions of the types of questions that should be asked regarding this policy if it is properly to be viewed as an example of decision making under uncertainty are made. It is concluded that ''A consideration of the various uncertainties involved in the question of dispersed vs. remote siting of energy facilities introduces a number of new elements into the analysis. On balance those considerations provide somewhat greater support for the clustered concept. The NEC approach seems to provide somewhat greater flexibility in accomodating possible future electricity generating technologies. Increased regulatory and construction efficiencies possible in an NEC reduces the impact of demand uncertainty as does the lower costs associated with construction acceleration or deceleration.'' It is also noted that, in the final analysis, ''it is the public's perception of the relative costs and benefits of a measure that determine the acceptability or unacceptability of a particular innovation,'' not the engineer's cost/benefit analysis. It is further noted that if the analysis can identify limits on analytical methods and models, it will not make the job of energy decision-making any easier, but it may make the process more responsive to its impact on society

  20. Tritium-related fusion technology programmes under EFDA-JET

    International Nuclear Information System (INIS)

    Coad, J. P.; Ciattaglia, S.; Piazza, G.; Rosanvallon, S.; Grisolia, Ch.; Laesser, R.

    2003-01-01

    The Fusion Technology Task Force (TFFT) has a wide-ranging series of programmes in the areas of waste management and safety, tritium recovery, tritium analysis and accounting, and testing components under development for ITER at JET. Examples have been presented here in the fields of waste management and safety. In waste management, the largest effort is currently on water de-tritiation, which is considered to be the most urgent and important topic affecting JET operations, and plant design is also required for ITER. It is also the most technically challenging of the waste detritiation issues. A complete design for a water de-tritiation plant for JET (a prototype for ITER), including optimised and tested catalysts, is expected within the next 2 years. TFFT safety programmes support the on-going work on safety in preparation for ITER, including tritium spreading and dust inhalation effects for worse-case accident scenarios. Effort is also going into documenting the operational experience of the JET machine with respect to reliability of mechanical components within the tritium boundary and radiation exposure, and inferring what lessons should be learnt for ITER

  1. Planning low-carbon electricity systems under uncertainty considering operational flexibility and smart grid technologies.

    Science.gov (United States)

    Moreno, Rodrigo; Street, Alexandre; Arroyo, José M; Mancarella, Pierluigi

    2017-08-13

    Electricity grid operators and planners need to deal with both the rapidly increasing integration of renewables and an unprecedented level of uncertainty that originates from unknown generation outputs, changing commercial and regulatory frameworks aimed to foster low-carbon technologies, the evolving availability of market information on feasibility and costs of various technologies, etc. In this context, there is a significant risk of locking-in to inefficient investment planning solutions determined by current deterministic engineering practices that neither capture uncertainty nor represent the actual operation of the planned infrastructure under high penetration of renewables. We therefore present an alternative optimization framework to plan electricity grids that deals with uncertain scenarios and represents increased operational details. The presented framework is able to model the effects of an array of flexible, smart grid technologies that can efficiently displace the need for conventional solutions. We then argue, and demonstrate via the proposed framework and an illustrative example, that proper modelling of uncertainty and operational constraints in planning is key to valuing operationally flexible solutions leading to optimal investment in a smart grid context. Finally, we review the most used practices in power system planning under uncertainty, highlight the challenges of incorporating operational aspects and advocate the need for new and computationally effective optimization tools to properly value the benefits of flexible, smart grid solutions in planning. Such tools are essential to accelerate the development of a low-carbon energy system and investment in the most appropriate portfolio of renewable energy sources and complementary enabling smart technologies.This article is part of the themed issue 'Energy management: flexibility, risk and optimization'. © 2017 The Author(s).

  2. EMERGING I&C TECHNOLOGIES UNDER THE SHIFTING REGULATORY ENVIRONMENT IN SOUTH KOREA

    Directory of Open Access Journals (Sweden)

    Gyunyoung eHeo

    2015-04-01

    Full Text Available The role of Probabilistic Safety Assessment (PSA has been supplementary and Risk-Informed Applications (RIAs based on the insight from PSA has also been utilized limitedly in the licensing process for Nuclear Power Plants (NPPs in South Korea. However, as the technical significance of PSA is getting increased, PSA has become a mandatory part of Safety Analysis Reports and Periodic Safety Review. It is worthwhile to highlight the role of emerging Instrumentation and Control (I&C technologies including human-machine interface (HMI in developing more credible and realistic PSA models. Particularly, it is expected that the information technology (i.e. software embedded in digital I&C can adjust over- and under conservatism in analyzing risk. In this study, authors proposed the cases which would be able to significantly reduce risk if advanced I&C supported by information technologies is applied. In regard, the several enabling techniques and their effects are proposed. In order to improve the commercial competitiveness of NPPs, the need of collaboration and synergetic outcome of I&C, HMI and PSA should be emphasized.

  3. Emerging I&C Technologies Under the Shifting Regulatory Environment in South Korea

    Energy Technology Data Exchange (ETDEWEB)

    Heo, Gyunyoung [Department of Nuclear Engineering, Kyung Hee University, Youngin-si (Korea, Republic of); Seong, Poong Hyun; Kang, Hyun Gook, E-mail: hyungook@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2015-04-29

    The role of probabilistic safety assessment (PSA) has been supplementary and risk-informed applications based on the insight from PSA have also been utilized limitedly in the licensing process for nuclear power plants (NPPs) in South Korea. However, as the technical significance of PSA is getting increased, PSA has become a mandatory part of Safety Analysis Reports and Periodic Safety Review. It is worthwhile to highlight the role of emerging instrumentation and control (I&C) technologies including human–machine interface (HMI) in developing more credible and realistic PSA models. Particularly, it is expected that the information technology (i.e., software) embedded in digital I&C can adjust over- and under conservatism in analyzing risk. In this study, authors proposed the cases which would be able to significantly reduce risk if advanced I&C supported by information technologies is applied. In regard, the several enabling techniques and their effects are proposed. In order to improve the commercial competitiveness of NPPs, the need of collaboration and synergetic outcome of I&C, HMI, and PSA should be emphasized.

  4. Control Strategy for Three-Phase Grid-Connected PV Inverters Enabling Current Limitation Under Unbalanced Faults

    DEFF Research Database (Denmark)

    Afshari, Ehsan; Moradi, Gholam Reza; Rahimi, Ramin

    2017-01-01

    Power quality and voltage control are among the most important aspects of the grid-connected power converter operation under faults. Non-sinusoidal current is injected during unbalanced voltage sag and active or/and reactive power includes double frequency content. This paper introduces a novel...... control strategy to mitigate the double grid frequency oscillations in the active power and dc-link voltage of the two-stage three-phase grid-connected Photovoltaic (PV) inverters during unbalanced faults. With the proposed control method, PV inverter injects sinusoidal currents under unbalanced grid...... faults. In addition, an efficient and easy-to-implement current limitation method is introduced, which can effectively limit the injected currents to the rated value during faults. In this case, the fault-ride-through operation is ensured and it will not trigger the overcurrent protection. A non...

  5. Technology-enabled assessment of health professions education: consensus statement and recommendations from the Ottawa 2010 Conference

    DEFF Research Database (Denmark)

    Amin, Zubair; Boulet, John R; Cook, David A

    2011-01-01

    health professional education. Recommendations include adhering to principles of good assessment, the need for developing coherent institutional policy, using technologies to broaden the competencies to be assessed, linking patient-outcome data to assessment of practitioner performance, and capitalizing...

  6. Demonstrating Enabling Technologies for the High-Resolution Imaging Spectrometer of the Next NASA X-ray Astronomy Mission

    Science.gov (United States)

    Kilbourne, Caroline; Adams, J. S.; Bandler, S.; Chervenak, J.; Chiao, M.; Doriese, R.; Eckart, M.; Finkbeiner, F.; Fowler, J. W.; Hilton, G.; Irwin, K.; Kelley, R. L.; Moseley, S. J.; Porter, F. S.; Reintsema, C.; Sadleir, J.; Smith, S. J.; Swetz, D.; Ullom, J.

    2014-01-01

    NASA/GSFC and NIST-Boulder are collaborating on a program to advance superconducting transition-edge sensor (TES) microcalorimeter technology toward Technology Readiness Level (TRL) 6. The technology development for a TES imaging X-ray microcalorimeter spectrometer (TES microcalorimeter arrays and time-division multiplexed SQUID readout) is now at TRL 4, as evaluated by both NASA and the European Space Agency (ESA) during mission formulation for the International X-ray Observatory (IXO). We will present the status of the development program. The primary goal of the current project is to advance the core X-ray Microcalorimeter Spectrometer (XMS) detector-system technologies to a demonstration of TRL 5 in 2014. Additional objectives are to develop and demonstrate two important related technologies to at least TRL 4: position-sensitive TES devices and code-division multiplexing (CDM). These technologies have the potential to expand significantly the range of possible instrument optimizations; together they allow an expanded focal plane and higher per-pixel count rates without greatly increasing mission resources. The project also includes development of a design concept and critical technologies needed for the thermal, electrical, and mechanical integration of the detector and readout components into the focal-plane assembly. A verified design concept for the packaging of the focal-plane components will be needed for the detector system eventually to advance to TRL 6. Thus, the current project is a targeted development and demonstration program designed to make significant progress in advancing the XMS detector system toward TRL 6, establishing its readiness for a range of possible mission implementations.

  7. Shifts in nitrogen acquisition strategies enable enhanced terrestrial carbon storage under elevated CO2 in a global model

    Science.gov (United States)

    Sulman, B. N.; Brzostek, E. R.; Menge, D.; Malyshev, S.; Shevliakova, E.

    2017-12-01

    Earth System Model (ESM) projections of terrestrial carbon (C) uptake are critical to understanding the future of the global C cycle. Current ESMs include intricate representations of photosynthetic C fixation in plants, allowing them to simulate the stimulatory effect of increasing atmospheric CO2 levels on photosynthesis. However, they lack sophisticated representations of plant nutrient acquisition, calling into question their ability to project the future land C sink. We conducted simulations using a new model of terrestrial C and nitrogen (N) cycling within the Geophysical Fluid Dynamics Laboratory (GFDL) global land model LM4 that uses a return on investment framework to simulate global patterns of N acquisition via fixation of N2 from the atmosphere, scavenging of inorganic N from soil solution, and mining of organic N from soil organic matter (SOM). We show that these strategies drive divergent C cycle responses to elevated CO2 at the ecosystem scale, with the scavenging strategy leading to N limitation of plant growth and the mining strategy facilitating stimulation of plant biomass accumulation over decadal time scales. In global simulations, shifts in N acquisition from inorganic N scavenging to organic N mining along with increases in N fixation supported long-term acceleration of C uptake under elevated CO2. Our results indicate that the ability of the land C sink to mitigate atmospheric CO2 levels is tightly coupled to the functional diversity of ecosystems and their capacity to change their N acquisition strategies over time. Incorporation of these mechanisms into ESMs is necessary to improve confidence in model projections of the global C cycle.

  8. Enabling Technologies for High-Throughput Screening of Nano-Porous Materials: Collaboration with the Nanoporous Materials Genome Center

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Jordan [Univ. of Wisconsin, Madison, WI (United States). Dept. of Chemistry

    2016-01-21

    The overarching goal of this research was to develop new methodologies to enable the accurate and efficient modeling of complex materials using computer simulations. Using inter-molecular interaction energies calculated via an accurate but computationally expensive approach (symmetry-adapted perturbation theory), we parameterized efficient next-generation “force fields” to utilize in subsequent simulations. Since the resulting force fields incorporate much of the relevant physics of inter-molecular interactions, they consequently exhibit high transferability from one material to another. This transferability enables the modeling of a wide range of novel materials without additional computational cost. While this approach is quite general, a particular emphasis of this research involved applications to so-called “metal-organic framework”(MOF) materials relevant to energy-intensive gas separations. We focused specifically on CO2/N2 selectivity, which is a key metric for post combustion CO2 capture efforts at coal-fired power plants. The gas adsorption capacities and selectivity of the MOFs can be tailored via careful functionalization. We have demonstrated that our force fields exhibit predictive accuracy for a wide variety of functionalized MOFs, thus opening the door for the computational design of “tailored” materials for particular separations. Finally, we have also demonstrated the importance of accounting for the presence of reactive contaminant species when evaluating the performance of MOFs in practical applications.

  9. Scientific Assessment in support of the Materials Roadmap enabling Low Carbon Energy Technologies: Hydrogen and Fuel Cells

    DEFF Research Database (Denmark)

    Cerri, I.; Lefebvre-Joud, F.; Holtappels, Peter

    A group of experts from European research organisations and industry have assessed the state of the art and future needs for materials' R&D for hydrogen and fuel cell technologies. The work was performed as input to the European Commission's roadmapping exercise on materials for the European...

  10. Enabling all young Australians to grow up safe, happy, healthy and resilient: a Collaboration for Young People, Technology and Wellbeing.

    Science.gov (United States)

    2011-07-01

    This paper describes a framework for a multi-disciplinary collaboration to investigate the role of technology for improving young Australians' mental health and wellbeing. The poor mental health of young Australians poses a significant challenge to Australia's future. Half of all Australians will experience a mental health difficulty in their lifetime and 75% of mental illness has its onset before age 25. Cross-sectoral collaboration is critical for meeting this challenge. In order to establish a world-first multi-partner collaboration, leading researchers and institutes, commercial, non-profit and end-user organization and young people were identified and invited to participate. Together we have developed an international research framework that explores the role of technologies in young people's lives, their potential and how this can be harnessed to address challenges facing young people. This research framework will: (i) conduct empirical research that tests the utility of technology across mental health promotion, prevention, early intervention and treatment and, (ii) translate existing and new knowledge into products and services that help create a generation of safe, happy, healthy and resilient young people. Research undertaken by the Collaboration will be the most comprehensive investigation of technologies' potential to improve the wellbeing of young people ever conducted, leading to significant benefits for Australian young people and their mental health.

  11. Rapid Information and Communication Technology Assessment Team (RTAT): Enabling the Hands and Feet to Win the Hearts and Minds

    Science.gov (United States)

    2014-09-01

    information and communication technology (ICT), information, communication, infrastructure , mobile , data collection, UN, emergency telecommunication...on the developed mobile data collection tool with automated backend server integration with the Pacific Disaster Center’s (PDC’s) DisasterAWARE web... infrastructure . This negatively impacts responders’ ability to communicate and collaborate with one another. As a result, humanitarian assistance (HA

  12. Boundary Interaction: Towards Developing a Mobile Technology-Enabled Science Curriculum to Integrate Learning in the Informal Spaces

    Science.gov (United States)

    Sun, Daner; Looi, Chee-Kit

    2018-01-01

    This paper explores the crossover between formal learning and learning in informal spaces supported by mobile technology, and proposes design principles for educators to carry out a science curriculum, namely Boundary Activity-based Science Curriculum (BAbSC). The conceptualization of the boundary object, and the principles of boundary activity as…

  13. Cultural repertoires and food-related household technology within colonia households under conditions of material hardship

    Directory of Open Access Journals (Sweden)

    Dean Wesley R

    2012-05-01

    Full Text Available Abstract Introduction Mexican-origin women in the U.S. living in colonias (new-destination Mexican-immigrant communities along the Texas-Mexico border suffer from a high incidence of food insecurity and diet-related chronic disease. Understanding environmental factors that influence food-related behaviors among this population will be important to improving the well-being of colonia households. This article focuses on cultural repertoires that enable food choice and the everyday uses of technology in food-related practice by Mexican-immigrant women in colonia households under conditions of material hardship. Findings are presented within a conceptual framework informed by concepts drawn from sociological accounts of technology, food choice, culture, and material hardship. Methods Field notes were provided by teams of promotora-researchers (indigenous community health workers and public-health professionals trained as participant observers. They conducted observations on three separate occasions (two half-days during the week and one weekend day within eight family residences located in colonias near the towns of Alton and San Carlos, Texas. English observations were coded inductively and early observations stressed the importance of technology and material hardship in food-related behavior. These observations were further explored and coded using the qualitative data package Atlas.ti. Results Technology included kitchen implements used in standard and adapted configurations and household infrastructure. Residents employed tools across a range of food-related activities identified as forms of food acquisition, storage, preparation, serving, feeding and eating, cleaning, and waste processing. Material hardships included the quality, quantity, acceptability, and uncertainty dimensions of food insecurity, and insufficient consumption of housing, clothing and medical care. Cultural repertoires for coping with material hardship included reliance on

  14. Cultural repertoires and food-related household technology within colonia households under conditions of material hardship.

    Science.gov (United States)

    Dean, Wesley R; Sharkey, Joseph R; Johnson, Cassandra M; St John, Julie

    2012-05-15

    BSTRACT: Mexican-origin women in the U.S. living in colonias (new-destination Mexican-immigrant communities) along the Texas-Mexico border suffer from a high incidence of food insecurity and diet-related chronic disease. Understanding environmental factors that influence food-related behaviors among this population will be important to improving the well-being of colonia households. This article focuses on cultural repertoires that enable food choice and the everyday uses of technology in food-related practice by Mexican-immigrant women in colonia households under conditions of material hardship. Findings are presented within a conceptual framework informed by concepts drawn from sociological accounts of technology, food choice, culture, and material hardship. Field notes were provided by teams of promotora-researchers (indigenous community health workers) and public-health professionals trained as participant observers. They conducted observations on three separate occasions (two half-days during the week and one weekend day) within eight family residences located in colonias near the towns of Alton and San Carlos, Texas. English observations were coded inductively and early observations stressed the importance of technology and material hardship in food-related behavior. These observations were further explored and coded using the qualitative data package Atlas.ti. Technology included kitchen implements used in standard and adapted configurations and household infrastructure. Residents employed tools across a range of food-related activities identified as forms of food acquisition, storage, preparation, serving, feeding and eating, cleaning, and waste processing. Material hardships included the quality, quantity, acceptability, and uncertainty dimensions of food insecurity, and insufficient consumption of housing, clothing and medical care. Cultural repertoires for coping with material hardship included reliance on inexpensive staple foods and dishes, and

  15. Rapid Information and Communication Technology Assessment Team (RTAT): enabling the "hands and feet" to win the "hearts and minds"

    OpenAIRE

    Beeson, R. Travis

    2014-01-01

    Approved for public release; distribution is unlimited Large-scale disasters severely damage local information and communication technology (ICT) infrastructure. This negatively impacts responders’ ability to communicate and collaborate with one another. As a result, humanitarian assistance (HA) response organizations cannot maintain situational awareness and efforts remain disjointed and inefficient. Out of the rubble of the Haiti earthquake, a cross-organizational collection of first res...

  16. Constraints Faced by Stakeholders under Agriculture Technology Management Agency (ATMA

    Directory of Open Access Journals (Sweden)

    J. Yoga Narasimhalu Naidu

    2017-09-01

    Full Text Available Agriculture Technology Management Agency (ATMA is a registered society in India with key stakeholders enmeshed with various agricultural activities for sustainable agricultural development in the state, with focus at district level. It is a hotbed for integrating research, extension and marketing activities and decentralizing day-to-day management of the public Agricultural Technology Development and Dissemination System. The present study was carried out in Andhra Pradesh state to explore the constraints faced by the extension functionaries at each level of decentralized management. Moreover, constraints perceived by the farmers with the support of ATMA in realizing their needs were also studied.

  17. Developing as an Academic Leader in a University of Technology in South Africa: Dealing with enabling and constraining teaching and learning environments

    Directory of Open Access Journals (Sweden)

    'Mabokang Liteboho Monnapula-Mapesela

    2017-12-01

    Full Text Available While the South African legislation is an enabler for equity, inclusiveness, social justice and the advancement of women for academic leadership roles, institutional cultures and structures are often debilitating. This paper presents the development trajectory of a Black woman as an academic development leader in a South African University of Technology. It examines structural and cultural factors acting as enablers or constraints to leadership development and career advancement for Black women. It analyses dominant structural frames and undertakings of different University stakeholders (agents, which cause stagnation and resistance to morphogenesis and government’s transformation agenda. Using Participatory Narrative Inquiry (PNI, I narrate personal experiences and insights as a participant researcher. I interrogate the experiences, observations and influence of various structural and cultural modalities within Margaret Archer’s (1995 social realist framework of structure, culture and agency. I highlight the implications of these for development of a Black female academic development leader.

  18. Health Technology-Enabled Interventions for Adherence Support and Retention in Care Among US HIV-Infected Adolescents and Young Adults: An Integrative Review.

    Science.gov (United States)

    Navarra, Ann-Margaret Dunn; Gwadz, Marya Viorst; Whittemore, Robin; Bakken, Suzanne R; Cleland, Charles M; Burleson, Winslow; Jacobs, Susan Kaplan; Melkus, Gail D'Eramo

    2017-11-01

    The objective of this integrative review was to describe current US trends for health technology-enabled adherence interventions among behaviorally HIV-infected youth (ages 13-29 years), and present the feasibility and efficacy of identified interventions. A comprehensive search was executed across five electronic databases (January 2005-March 2016). Of the 1911 identified studies, nine met the inclusion criteria of quantitative or mixed methods design, technology-enabled adherence and or retention intervention for US HIV-infected youth. The majority were small pilots. Intervention dose varied between studies applying similar technology platforms with more than half not informed by a theoretical framework. Retention in care was not a reported outcome, and operationalization of adherence was heterogeneous across studies. Despite these limitations, synthesized findings from this review demonstrate feasibility of computer-based interventions, and initial efficacy of SMS texting for adherence support among HIV-infected youth. Moving forward, there is a pressing need for the expansion of this evidence base.

  19. Residential Customer Enrollment in Time-based Rate and Enabling Technology Programs: Smart Grid Investment Grant Consumer Behavior Study Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Todd, Annika [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cappers, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Goldman, Charles [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-05-01

    The U.S. Department of Energy’s (DOE’s) Smart Grid Investment Grant (SGIG) program is working with a subset of the 99 SGIG projects undertaking Consumer Behavior Studies (CBS), which examine the response of mass market consumers (i.e., residential and small commercial customers) to time-varying electricity prices (referred to herein as time-based rate programs) in conjunction with the deployment of advanced metering infrastructure (AMI) and associated technologies. The effort presents an opportunity to advance the electric industry’s understanding of consumer behavior.

  20. Factors Underlying Technology Adoption in Academic Libraries in Kuwait

    Science.gov (United States)

    Al-Fadhli, Meshal; Corrall, Sheila; Cox, Andrew

    2016-01-01

    The study analyzed factors shaping adoption of technology in academic libraries in Kuwait. The research was based on interviews conducted with library directors, staff, and users, combined with observation and document analysis. A major aspect of the Kuwaiti context was a relative lack of financial restraints and an enthusiasm for technology…

  1. International workshop: islet transplantation without borders enabling islet transplantation in Greece with international collaboration and innovative technology.

    Science.gov (United States)

    Papas, Klearchos K; Karatzas, Theodore; Berney, Thierry; Minor, Thomas; Pappas, Paris; Pattou, François; Shaw, James; Toso, Christian; Schuurman, Henk-Jan

    2013-01-01

    Recently, initiatives have been undertaken to establish an islet transplantation program in Athens, Greece. A major hurdle is the high cost associated with the establishment and maintenance of a clinical-grade islet manufacturing center. A collaboration was established with the University Hospitals of Geneva, Switzerland, to enable remote islet cell manufacturing with an established and validated fully operational team. However, remote islet manufacturing requires shipment of the pancreas from the procurement to the islet manufacturing site (in this case from anywhere in Greece to Geneva) and then shipment of the islets from the manufacturing site to the transplant site (from Geneva to Athens). To address challenges related to cold ischemia time of the pancreas and shipment time of islets, a collaboration was initiated with the University of Arizona, Tucson, USA. An international workshop was held in Athens, December 2011, to mark the start of this collaborative project. Experts in the field presented in three main sessions: (i) islet transplantation: state-of-the-art and the "network approach"; (ii) technical aspects of clinical islet transplantation and outcomes; and (iii) islet manufacturing - from the donated pancreas to the islet product. This manuscript presents a summary of the workshop. © 2013 John Wiley & Sons A/S.

  2. A Case Study of Mobile Technology-enabled English Language Learning: the Amazon Kindle e-Reader Initiative in Palestine

    Directory of Open Access Journals (Sweden)

    Khitam Yousuf Shraim

    2014-06-01

    Full Text Available The proliferation of increasingly interactive e-reader devices such as the Amazon Kindle represents an opportunity to explore their evolving pedagogical value. This study aims to investigate how use of the Kindle can enhance individuals’ English language learning—more specifically their attitudes, reading comprehension, vocabulary development and pronunciation performance—in the context of informal and lifelong learning in Palestine, and to explore the further potential of scaling up the use of e-readers at a national level. At the piloting stage of this initiative, the study operated at two levels (micro and meso of the M3 evaluation framework. Mixed methods were used: qualitative data were obtained through a case study of the practices and perceptions of two teachers in two classrooms in the Qalqilia center and quantitative data were collected through a survey of 114 learners. The study shows that the Kindle’s technological affordances are effective in creating a flexible, authentic and interactive environment for English language learning, provided that teachers change their teaching methods to take full advantage of the features of mobile technologies to create innovative learning approaches aligned with the needs of the e-generation. It was also found that despite some concerns with the usability issue, attitudes towards learning English changed positively and learners’ vocabulary and pronunciation improved.

  3. ESTABLISHING SUSTAINABLE US HEV/PHEV MANUFACTURING BASE: STABILIZED LITHIUM METAL POWDER, ENABLING MATERIAL AND REVOLUTIONARY TECHNOLOGY FOR HIGH ENERGY LI-ION BATTERIES

    Energy Technology Data Exchange (ETDEWEB)

    Yakovleva, Marina

    2012-12-31

    FMC Lithium Division has successfully completed the project “Establishing Sustainable US PHEV/EV Manufacturing Base: Stabilized Lithium Metal Powder, Enabling Material and Revolutionary Technology for High Energy Li-ion Batteries”. The project included design, acquisition and process development for the production scale units to 1) produce stabilized lithium dispersions in oil medium, 2) to produce dry stabilized lithium metal powders, 3) to evaluate, design and acquire pilot-scale unit for alternative production technology to further decrease the cost, and 4) to demonstrate concepts for integrating SLMP technology into the Li- ion batteries to increase energy density. It is very difficult to satisfy safety, cost and performance requirements for the PHEV and EV applications. As the initial step in SLMP Technology introduction, industry can use commercially available LiMn2O4 or LiFePO4, for example, that are the only proven safer and cheaper lithium providing cathodes available on the market. Unfortunately, these cathodes alone are inferior to the energy density of the conventional LiCoO2 cathode and, even when paired with the advanced anode materials, such as silicon composite material, the resulting cell will still not meet the energy density requirements. We have demonstrated, however, if SLMP Technology is used to compensate for the irreversible capacity in the anode, the efficiency of the cathode utilization will be improved and the cost of the cell, based on the materials, will decrease.

  4. A technology-enabled adherence enhancement system for people with bipolar disorder: results from a feasibility and patient acceptance analysis

    Directory of Open Access Journals (Sweden)

    Sajatovic M

    2015-06-01

    Full Text Available Martha Sajatovic,1 Michael S Davis,2 Kristin A Cassidy,3 Joseph Nestor,2 Johnny Sams,3 Edna Fuentes-Casiano3 1Department of Psychiatry and Neurological and Behavioral Outcomes Center, Case Western Reserve University School of Medicine and University Hospitals Case Medical Center, Cleveland, OH, USA; 2MedicaSafe, New York, NY, USA; 3Department of Psychiatry, Case Western Reserve University School of Medicine, University Hospitals Case Medical Center, Cleveland, OH, USA Objective: As poor medication adherence is common in bipolar disorder (BD, technology-assisted approaches may help to monitor and enhance adherence. This study evaluated preliminary feasibility, patient satisfaction and effects on adherence, BD knowledge, and BD symptoms associated with the use of a multicomponent technology-assisted adherence enhancement system. Methods: This prospective study tested the system in five BD patients over a 15-day period. System components included: 1 an automated pill cap with remote monitoring sensor; 2 a multimedia adherence enhancement program; and 3 a treatment incentive program. This study evaluated system usability, patient satisfaction and effects on adherence (Morisky scale, knowledge (treatment knowledge test [TKT], and symptoms (internal state scale [ISS]. Results: Mean age of the sample was 62 years, 4/5 (80% Caucasian, and 4/5 (80% single/divorced or widowed. Most participants (4/5, 80% were on a single BD medication. Participants had BD for an average of 21 years. Challenges included attaching the pill sensor to standard pharmacy bottles for individuals using very large pill containers or those with multiday pill boxes. Three of five (60% individuals completed the full 15-day period. Usability scores were high overall. Mean Morisky scores improved. Means on all four subscales of the ISS were all in the direction of improvement. On the TKT, there was a 40% increase in mean scores. Conclusion: A multicomponent technology-assisted BD

  5. Microscale High-Throughput Experimentation as an Enabling Technology in Drug Discovery: Application in the Discovery of (Piperidinyl)pyridinyl-1H-benzimidazole Diacylglycerol Acyltransferase 1 Inhibitors.

    Science.gov (United States)

    Cernak, Tim; Gesmundo, Nathan J; Dykstra, Kevin; Yu, Yang; Wu, Zhicai; Shi, Zhi-Cai; Vachal, Petr; Sperbeck, Donald; He, Shuwen; Murphy, Beth Ann; Sonatore, Lisa; Williams, Steven; Madeira, Maria; Verras, Andreas; Reiter, Maud; Lee, Claire Heechoon; Cuff, James; Sherer, Edward C; Kuethe, Jeffrey; Goble, Stephen; Perrotto, Nicholas; Pinto, Shirly; Shen, Dong-Ming; Nargund, Ravi; Balkovec, James; DeVita, Robert J; Dreher, Spencer D

    2017-05-11

    Miniaturization and parallel processing play an important role in the evolution of many technologies. We demonstrate the application of miniaturized high-throughput experimentation methods to resolve synthetic chemistry challenges on the frontlines of a lead optimization effort to develop diacylglycerol acyltransferase (DGAT1) inhibitors. Reactions were performed on ∼1 mg scale using glass microvials providing a miniaturized high-throughput experimentation capability that was used to study a challenging S N Ar reaction. The availability of robust synthetic chemistry conditions discovered in these miniaturized investigations enabled the development of structure-activity relationships that ultimately led to the discovery of soluble, selective, and potent inhibitors of DGAT1.

  6. A qualitative study of the challenges related to the development of product enabled services in technology driven start-ups

    DEFF Research Database (Denmark)

    Pedersen, Søren; Tanev, Stoyan; Ma, Zheng

    of products and services to meet specific customer demands, thus generating additional value. This paper examines technology-based start-ups’ attitude towards the development of hybrid offerings as part of their business differentiation and positioning strategies. The main research question is answered within...... that start-ups have limited human and financial resources that is often combined with lacking business and commercialization knowledge. The screening criteria from the new venture funding organisation appear to be very much product focused, as the tangibility of the products, as compared to services, makes...... it easier to make selection decisions. By basing their selection criteria on a customerdominant logic, the funding organisation can better support start-ups to embark onto the right competitive path from the very beginning. This would help the start-ups in the design and development of integrated hybrid...

  7. Mobile Technology in Science Classrooms: Using iPad-Enabled Constructivist Learning to Promote Collaborative Problem Solving and Chemistry Learning

    Science.gov (United States)

    Ting, Melodie Mirth G.

    Most recently, there has been a noticeable rise in the push for use of technology in the classroom. The advancement in digital science has increased greatly the capacity to explore animations, models, and interesting apps. that should substantially enhance science cognition. At the same time, there is a great need to increase collaboration in the science classroom. There is a concern that the collaborative experience will be lost with the use of technology in the classroom. This study seeks to explore the use of iPads in conjunction with a constructivist learning approach to promote student collaboration. The participants in this study included two sections of 11 th grade AP Chemistry students. Data was generated from different sources such as teacher observations of classroom interactions patterned after Gilles (2004). In order to gauge student perception of working in groups with the use of the iPad, survey questions adapted from Knezek, Mills and Wakefield (2012) and group interviews were used (Galleta, 2013). Learning outcomes were assessed using methods adapted from a study by Lord and Baviskar (2007). Findings of this study showed high percentages of evidence for increased community, productive student group communication, effective feedback through use of the iPads, and value of the interactive apps., but it also showed that students still preferred face-to-face interactions over virtual interactions for certain learning situations. The study showed good content learning outcomes, as well as favorable opinions among the students for the effectiveness of the use of iPads in collaborative settings in the classroom.

  8. 48 CFR 18.119 - Use of patented technology under the North American Free Trade Agreement.

    Science.gov (United States)

    2010-10-01

    ... under the North American Free Trade Agreement. 18.119 Section 18.119 Federal Acquisition Regulations... Available Acquisition Flexibilities 18.119 Use of patented technology under the North American Free Trade Agreement. Requirement to obtain authorization prior to use of patented technology may be waived in...

  9. A New Paradigm of Technology-Enabled ‘Vital Signs’ for Early Detection of Health Change for Older Adults.

    Science.gov (United States)

    Rantz, Marilyn J; Skubic, Marjorie; Popescu, Mihail; Galambos, Colleen; Koopman, Richelle J; Alexander, Gregory L; Phillips, Lorraine J; Musterman, Katy; Back, Jessica; Miller, Steven J

    2015-01-01

    Environmentally embedded (nonwearable) sensor technology is in continuous use in elder housing to monitor a new set of ‘vital signs' that continuously measure the functional status of older adults, detect potential changes in health or functional status, and alert healthcare providers for early recognition and treatment of those changes. Older adult participants' respiration, pulse, and restlessness are monitored as they sleep. Gait speed, stride length, and stride time are calculated daily, and automatically assess for increasing fall risk. Activity levels are summarized and graphically displayed for easy interpretation. Falls are detected when they occur and alerts are sent immediately to healthcare providers, so time to rescue may be reduced. Automated health alerts are sent to healthcare staff, based on continuously running algorithms applied to the sensor data, days and weeks before typical signs or symptoms are detected by the person, family members, or healthcare providers. Discovering these new functional status ‘vital signs', developing automated methods for interpreting them, and alerting others when changes occur have the potential to transform chronic illness management and facilitate aging in place through the end of life. Key findings of research in progress at the University of Missouri are discussed in this viewpoint article, as well as obstacles to widespread adoption.

  10. An information technology enabled sustainability test-bed (ITEST) for occupancy detection through an environmental sensing network

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Bing; Lam, Khee Poh; Zhang, Rui; Chiou, Yun-Shang [Center for Building Performance and Diagnostics, Carnegie Mellon University, Pittsburgh, PA 15213 (United States); Andrews, Burton; Hoeynck, Michael; Benitez, Diego [Research and Technology Center, Robert BOSCH LLC, Pittsburgh, PA 15212 (United States)

    2010-07-15

    This paper describes a large-scale wireless and wired environmental sensor network test-bed and its application to occupancy detection in an open-plan office building. Detection of occupant presence has been used extensively in built environments for applications such as demand-controlled ventilation and security; however, the ability to discern the actual number of people in a room is beyond the scope of current sensing techniques. To address this problem, a complex sensor network is deployed in the Robert L. Preger Intelligent Workplace comprising a wireless ambient-sensing system, a wired carbon dioxide sensing system, and a wired indoor air quality sensing system. A wired camera network is implemented as well for establishing true occupancy levels to be used as ground truth information for deriving algorithmic relationships with the environment conditions. To our knowledge, this extensive and diverse ambient-sensing infrastructure of the ITEST setup as well as the continuous data-collection capability is unprecedented. Final results indicate that there are significant correlations between measured environmental conditions and occupancy status. An average of 73% accuracy on the occupancy number detection was achieved by Hidden Markov Models during testing periods. This paper serves as an exploration to the research of ITEST for occupancy detection in offices. In addition, its utility extends to a wide variety of other building technology research areas such as human-centered environmental control, security, energy efficient and sustainable green buildings. (author)

  11. Fast Technology Analysis (FTA) Enables Identification of Species and Genotypes of Latent Microsporidia Infections in Healthy Native Cameroonians

    Science.gov (United States)

    Ndzi, Edward S.; Asonganyi, Tazoacha; Nkinin, Mary Bello; Xiao, Lihua; Didier, Elizabeth S.; Bowers, Lisa C.; Nkinin, Stephenson W.; Kaneshiro, Edna S.

    2015-01-01

    Several enteric microsporidia species have been detected in humans and other vertebrates and their identifications at the genotype level are currently being elucidated. As advanced methods, reagents, and disposal kits for detecting and identifying pathogens become commercially available, it is important to test them in settings other than in laboratories with “state-of-the-art” equipment and well-trained staff members. In the present study, we sought to detect microsporidia DNA preserved and extracted from FTA (fast technology analysis) cards spotted with human fecal suspensions obtained from Cameroonian volunteers living in the capital city of Yaoundé to preclude the need for employing spore-concentrating protocols. Further, we tested whether amplicon nucleotide sequencing approaches could be used on small aliquots taken from the cards to elucidate the diversity of microsporidia species and strains infecting native residents. Of 196 samples analyzed, 12 (6.1%) were positive for microsporidia DNA; Enterocytozoon bieneusi (Type IV and KIN-1), Encephalitozoon cuniculi, and Encephalitozoon intestinalis were identified. These data demonstrate the utility of the FTA cards in identifying genotypes of microsporidia DNA in human fecal samples that may be applied to field testing for prevalence studies. PMID:26303263

  12. Technologies using accelerator-driven targets under development at BNL

    International Nuclear Information System (INIS)

    Van Tuyle, G.J.

    1994-01-01

    Recent development work conducted at Brookhaven National Laboratory on technologies which use particle accelerator-driven targets is summarized. These efforts include development of the Spallation-Induced Lithium Conversion (SILC) Target for the Accelerator Production of Tritium (APT), the Accelerator-Driven Assembly for Plutonium Transformation (ADAPT) Target for the Accelerator-Based Conversion (ABC) of excess weapons plutonium. The PHOENIX Concept for the accelerator-driven transmutation of minor actinides and fission products from the waste stream of commercial nuclear power plants, and other potential applications

  13. Endogenous technological and population change under increasing water scarcity

    NARCIS (Netherlands)

    Pande, S.; Ertsen, M.; Sivapalan, M.

    2013-01-01

    The ancient civilization in the Indus Valley civilization dispersed under extreme dry conditions; there are indications that the same holds for many other ancient societies. Even contemporary societies, such as the one in Murrumbidgee river basin in Australia, have started to witness a decline in

  14. PMEL contributions to the collaboration: SCALING THE EARTH SYSTEM GRID TO PETASCALE DATA for the DOE SciDACs Earth System Grid Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Hankin, Steve

    2012-06-01

    Drawing to a close after five years of funding from DOE's ASCR and BER program offices, the SciDAC-2 project called the Earth System Grid (ESG) Center for Enabling Technologies has successfully established a new capability for serving data from distributed centers. The system enables users to access, analyze, and visualize data using a globally federated collection of networks, computers and software. The ESG software now known as the Earth System Grid Federation (ESGF) has attracted a broad developer base and has been widely adopted so that it is now being utilized in serving the most comprehensive multi-model climate data sets in the world. The system is used to support international climate model intercomparison activities as well as high profile U.S. DOE, NOAA, NASA, and NSF projects. It currently provides more than 25,000 users access to more than half a petabyte of climate data (from models and from observations) and has enabled over a 1,000 scientific publications.

  15. High-Performance All-Solid-State Na-S Battery Enabled by Casting-Annealing Technology.

    Science.gov (United States)

    Fan, Xiulin; Yue, Jie; Han, Fudong; Chen, Ji; Deng, Tao; Zhou, Xiuquan; Hou, Singyuk; Wang, Chunsheng

    2018-04-24

    Room-temperature all-solid-state Na-S batteries (ASNSBs) using sulfide solid electrolytes are a promising next-generation battery technology due to the high energy, enhanced safety, and earth abundant resources of both sodium and sulfur. Currently, the sulfide electrolyte ASNSBs are fabricated by a simple cold-pressing process leaving with high residential stress. Even worse, the large volume change of S/Na 2 S during charge/discharge cycles induces additional stress, seriously weakening the less-contacted interfaces among the solid electrolyte, active materials, and the electron conductive agent that are formed in the cold-pressing process. The high and continuous increase of the interface resistance hindered its practical application. Herein, we significantly reduce the interface resistance and eliminate the residential stress in Na 2 S cathodes by fabricating Na 2 S-Na 3 PS 4 -CMK-3 nanocomposites using melting-casting followed by stress-release annealing-precipitation process. The casting-annealing process guarantees the close contact between the Na 3 PS 4 solid electrolyte and the CMK-3 mesoporous carbon in mixed ionic/electronic conductive matrix, while the in situ precipitated Na 2 S active species from the solid electrolyte during the annealing process guarantees the interfacial contact among these three subcomponents without residential stress, which greatly reduces the interfacial resistance and enhances the electrochemical performance. The in situ synthesized Na 2 S-Na 3 PS 4 -CMK-3 composite cathode delivers a stable and highly reversible capacity of 810 mAh/g at 50 mA/g for 50 cycles at 60 °C. The present casting-annealing strategy should provide opportunities for the advancement of mechanically robust and high-performance next-generation ASNSBs.

  16. Enabling Venus In-Situ Science - Deployable Entry System Technology, Adaptive Deployable Entry and Placement Technology (ADEPT): A Technology Development Project funded by Game Changing Development Program of the Space Technology Program

    Science.gov (United States)

    Wercinski, Paul F.; Venkatapathy, Ethiraj; Gage, Peter J.; Yount, Bryan C.; Prabhu, Dinesh K.; Smith, Brandon; Arnold, James O.; Makino, alberto; Peterson, Keith Hoppe; Chinnapongse, Ronald I.

    2012-01-01

    Venus is one of the important planetary destinations for scientific exploration, but: The combination of extreme entry environment coupled with extreme surface conditions have made mission planning and proposal efforts very challenging. We present an alternate, game-changing approach (ADEPT) where a novel entry system architecture enables more benign entry conditions and this allows for greater flexibility and lower risk in mission design

  17. The ADH7 Promoter of Saccharomyces cerevisiae is Vanillin-Inducible and Enables mRNA Translation Under Severe Vanillin Stress.

    Science.gov (United States)

    Nguyen, Trinh T M; Iwaki, Aya; Izawa, Shingo

    2015-01-01

    Vanillin is one of the major phenolic aldehyde compounds derived from lignocellulosic biomass and acts as a potent fermentation inhibitor to repress the growth and fermentative ability of yeast. Vanillin can be reduced to its less toxic form, vanillyl alcohol, by the yeast NADPH-dependent medium chain alcohol dehydrogenases, Adh6 and Adh7. However, there is little information available regarding the regulation of their gene expression upon severe vanillin stress, which has been shown to repress the bulk translation activity in yeast cells. Therefore, in this study, we investigated expression patterns of the ADH6 and ADH7 genes in the presence of high concentrations of vanillin. We found that although both genes were transcriptionally upregulated by vanillin stress, they showed different protein expression patterns in response to vanillin. Expression of Adh6 was constitutive and gradually decreased under vanillin stress, whereas expression of Adh7 was inducible, and, importantly, occurred under severe vanillin stress. The null mutants of ADH6 or ADH7 genes were hypersensitive to vanillin and reduced vanillin less efficiently than the wild type, confirming the importance of Adh6 and Adh7 in vanillin detoxification. Additionally, we demonstrate that the ADH7 promoter is vanillin-inducible and enables effective protein synthesis even under severe vanillin stress, and it may be useful for the improvement of vanillin-tolerance and biofuel production efficiency via modification of yeast gene expression in the presence of high concentrations of vanillin.

  18. The ADH7 promoter of Saccharomyces cerevisiae is vanillin-inducible and enables mRNA translation under severe vanillin stress

    Directory of Open Access Journals (Sweden)

    Trinh Thi My Nguyen

    2015-12-01

    Full Text Available Vanillin is one of the major phenolic aldehyde compounds derived from lignocellulosic biomass and acts as a potent fermentation inhibitor to repress the growth and fermentative ability of yeast. Vanillin can be reduced to its less toxic form, vanillyl alcohol, by the yeast NADPH-dependent medium chain alcohol dehydrogenases, Adh6 and Adh7. However, there is little information available regarding the regulation of their gene expression upon severe vanillin stress, which has been shown to repress the bulk translation activity in yeast cells. Therefore, in this study, we investigated expression patterns of the ADH6 and ADH7 genes in the presence of high concentrations of vanillin. We found that although both genes were transcriptionally upregulated by vanillin stress, they showed different protein expression patterns in response to vanillin. Expression of Adh6 was constitutive and gradually decreased under vanillin stress, whereas expression of Adh7 was inducible, and, importantly, occurred under severe vanillin stress. The null mutants of ADH6 or ADH7 genes were hypersensitive to vanillin and reduced vanillin less efficiently than the wild type, confirming the importance of Adh6 and Adh7 in vanillin detoxification. Additionally, we demonstrate that the ADH7 promoter is vanillin-inducible and enables effective protein synthesis even under severe vanillin stress, and it may be useful for the improvement of vanillin-tolerance and biofuel production efficiency via modification of yeast gene expression in the presence of high concentrations of vanillin.

  19. Diagnosing Management of Agricultural Research and Technology Development under the Agricultural Innovation Framework

    Directory of Open Access Journals (Sweden)

    2014-06-01

    Full Text Available This study aimed at identifying and analyzing issues and challenges on the agricultural research and technology development under the national innovation framework. The survey consisted of two groups: agricultural researchers of Agriculture-Research and Education Organization and all faculty members of public agricultural faculties of Ministry of Scientific, Research and Technology. Using Cochran sampling formula and multi-stage sampling method, 188 researchers and 205 faculty members were selected in order to fill in the survey questionnaire. Using the SPSS, collected data analyzed based on explanatory factor analysis. Totally, factor analysis of three sets of issues and challenges on the agricultural research and technology development under the national innovation framework led to extract 13 factors, including agricultural structure and policy, infrastructure and resources of agricultural development, supportive services for agricultural development (level of agricultural development, investment and capacity building in research and technology, management of research and technology development, research and technology productivity, research culture, networks for research and technology development (level of national innovation system, agricultural research policy, impacts and effectiveness of agricultural research and technology development, integrated management of research and technology, institutional development for agricultural research and technology and systematic synergy of agricultural research and higher education (level of agricultural innovation system. Totally, these three sets of factors explained 64%, 75% and 73% of the total variances. Finally, using conceptual clustering for the extracted factors, a conceptual model of issues and challenges of agricultural research and technology development under the national innovation framework was presented.

  20. A study on organizational culture, structure and information technology as three KM enablers: A case study in five Iranian medical and healthcare research centers

    Directory of Open Access Journals (Sweden)

    Mahdi Iran-nejad-parizi

    2013-01-01

    Full Text Available This study investigates organizational structure, culture, and information technology as knowledge management (KM infrastructural capabilities, and compares their significance and status quo in five medical research centers in Tehran, Iran. Objectives of this research were pursued by employing two statistical methods, regression analysis and Friedman test. Included in the study were 135 people (researchers and support staff from five medical and healthcare research centers of Tehran. A survey questionnaire including 23 questions was utilized to examine organizational structure, culture and information technology indicators. And another 12 questions examined KM effectiveness. The Friedman test indicated that in terms of their status quo, the three studied KM enablers are at different conditions, with organizational culture having the best (mean rank=1.79 and IT the worst (mean rank=2.14 status. Moreover, it was revealed by regression analysis that organizational structure is believed to have the most significant impact (Beta= 0.397 on the effectiveness of knowledge management initiatives, while information technology gained the least perceived impact (Beta= 0.176.

  1. Using internet enabled mobile devices and social networking technologies to promote exercise as an intervention for young first episode psychosis patients.

    Science.gov (United States)

    Killackey, Eoin; Anda, Anna Lee; Gibbs, Martin; Alvarez-Jimenez, Mario; Thompson, Andrew; Sun, Pamela; Baksheev, Gennady N

    2011-05-12

    Young people with first episode psychosis are at an increased risk for a range of poor health outcomes. In contrast to the growing body of evidence that suggests that exercise therapy may benefit the physical and mental health of people diagnosed with schizophrenia, there are no studies to date that have sought to extend the use of exercise therapy among patients with first episode psychosis. The aim of the study is to test the feasibility and acceptability of an exercise program that will be delivered via internet enabled mobile devices and social networking technologies among young people with first episode psychosis. This study is a qualitative pilot study being conducted at Orygen Youth Health Research Centre in Melbourne, Australia. Participants are young people aged 15-24 who are receiving clinical care at a specialist first episode psychosis treatment centre. Participants will also comprise young people from the general population. The exercise intervention is a 9-week running program, designed to gradually build a person's level of fitness to be able to run 5 kilometres (3 miles) towards the end of the program. The program will be delivered via an internet enabled mobile device. Participants will be asked to post messages about their running experiences on the social networking website, and will also be asked to attend three face-to-face interviews. This paper describes the development of a qualitative study to pilot a running program coupled with the use of internet enabled mobile devices among young people with first episode psychosis. If the program is found to be feasible and acceptable to patients, it is hoped that further rigorous evaluations will ultimately lead to the introduction of exercise therapy as part of an evidence-based, multidisciplinary approach in routine clinical care.

  2. Using internet enabled mobile devices and social networking technologies to promote exercise as an intervention for young first episode psychosis patients

    Directory of Open Access Journals (Sweden)

    Sun Pamela

    2011-05-01

    Full Text Available Abstract Background Young people with first episode psychosis are at an increased risk for a range of poor health outcomes. In contrast to the growing body of evidence that suggests that exercise therapy may benefit the physical and mental health of people diagnosed with schizophrenia, there are no studies to date that have sought to extend the use of exercise therapy among patients with first episode psychosis. The aim of the study is to test the feasibility and acceptability of an exercise program that will be delivered via internet enabled mobile devices and social networking technologies among young people with first episode psychosis. Methods/Design This study is a qualitative pilot study being conducted at Orygen Youth Health Research Centre in Melbourne, Australia. Participants are young people aged 15-24 who are receiving clinical care at a specialist first episode psychosis treatment centre. Participants will also comprise young people from the general population. The exercise intervention is a 9-week running program, designed to gradually build a person's level of fitness to be able to run 5 kilometres (3 miles towards the end of the program. The program will be delivered via an internet enabled mobile device. Participants will be asked to post messages about their running experiences on the social networking website, and will also be asked to attend three face-to-face interviews. Discussion This paper describes the development of a qualitative study to pilot a running program coupled with the use of internet enabled mobile devices among young people with first episode psychosis. If the program is found to be feasible and acceptable to patients, it is hoped that further rigorous evaluations will ultimately lead to the introduction of exercise therapy as part of an evidence-based, multidisciplinary approach in routine clinical care.

  3. SciDAC's Earth System Grid Center for Enabling Technologies Semi-Annual Progress Report for the Period October 1, 2009 through March 31, 2010

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Foster, I. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Middleton, D. E. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Ananthakrishnan, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Siebenlist, F. [Argonne National Lab. (ANL), Argonne, IL (United States); Shoshani, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sim, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bell, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Drach, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ahrens, J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jones, P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, D. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Chastang, J. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Cinquini, L. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Fox, P. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Harper, D. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Hook, N. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Nienhouse, E. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Strand, G. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); West, P. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Wilcox, H. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Wilhelmi, N. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Zednik, S. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Hankin, S. [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Schweitzer, R. [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Bernholdt, D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chen, M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Miller, R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shipman, G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wang, F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bharathi, S. [Univ. of Southern California, Marina Del Rey, CA (United States). Information Sciences Institute; Chervenak, A. [Univ. of Southern California, Marina Del Rey, CA (United States). Information Sciences Institute; Schuler, R. [Univ. of Southern California, Marina Del Rey, CA (United States). Information Sciences Institute; Su, M. [Univ. of Southern California, Marina Del Rey, CA (United States). Information Sciences Institute

    2010-04-21

    This report summarizes work carried out by the ESG-CET during the period October 1, 2009 through March 31, 2009. It includes discussion of highlights, overall progress, period goals, collaborations, papers, and presentations. To learn more about our project, and to find previous reports, please visit the Earth System Grid Center for Enabling Technologies (ESG-CET) website. This report will be forwarded to the DOE SciDAC program management, the Office of Biological and Environmental Research (OBER) program management, national and international collaborators and stakeholders (e.g., the Community Climate System Model (CCSM), the Intergovernmental Panel on Climate Change (IPCC) 5th Assessment Report (AR5), the Climate Science Computational End Station (CCES), the SciDAC II: A Scalable and Extensible Earth System Model for Climate Change Science, the North American Regional Climate Change Assessment Program (NARCCAP), and other wide-ranging climate model evaluation activities).

  4. Enabling distributed collaborative science

    DEFF Research Database (Denmark)

    Hudson, T.; Sonnenwald, Diane H.; Maglaughlin, K.

    2000-01-01

    To enable collaboration over distance, a collaborative environment that uses a specialized scientific instrument called a nanoManipulator is evaluated. The nanoManipulator incorporates visualization and force feedback technology to allow scientists to see, feel, and modify biological samples bein...

  5. SciDAC's Earth System Grid Center for Enabling Technologies Semiannual Progress Report October 1, 2010 through March 31, 2011

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-04-02

    This report summarizes work carried out by the Earth System Grid Center for Enabling Technologies (ESG-CET) from October 1, 2010 through March 31, 2011. It discusses ESG-CET highlights for the reporting period, overall progress, period goals, and collaborations, and lists papers and presentations. To learn more about our project and to find previous reports, please visit the ESG-CET Web sites: http://esg-pcmdi.llnl.gov/ and/or https://wiki.ucar.edu/display/esgcet/Home. This report will be forwarded to managers in the Department of Energy (DOE) Scientific Discovery through Advanced Computing (SciDAC) program and the Office of Biological and Environmental Research (OBER), as well as national and international collaborators and stakeholders (e.g., those involved in the Coupled Model Intercomparison Project, phase 5 (CMIP5) for the Intergovernmental Panel on Climate Change (IPCC) 5th Assessment Report (AR5); the Community Earth System Model (CESM); the Climate Science Computational End Station (CCES); SciDAC II: A Scalable and Extensible Earth System Model for Climate Change Science; the North American Regional Climate Change Assessment Program (NARCCAP); the Atmospheric Radiation Measurement (ARM) program; the National Aeronautics and Space Administration (NASA), the National Oceanic and Atmospheric Administration (NOAA)), and also to researchers working on a variety of other climate model and observation evaluation activities. The ESG-CET executive committee consists of Dean N. Williams, Lawrence Livermore National Laboratory (LLNL); Ian Foster, Argonne National Laboratory (ANL); and Don Middleton, National Center for Atmospheric Research (NCAR). The ESG-CET team is a group of researchers and scientists with diverse domain knowledge, whose home institutions include eight laboratories and two universities: ANL, Los Alamos National Laboratory (LANL), Lawrence Berkeley National Laboratory (LBNL), LLNL, NASA/Jet Propulsion Laboratory (JPL), NCAR, Oak Ridge National

  6. Technologies for exhaust aftertreatment testing under real conditions; Abgasnachbehandlungs-Technologien. Erprobung im realen Bahnbetrieb

    Energy Technology Data Exchange (ETDEWEB)

    Weigel, Claudia; Schaeffner, Guido; Hehle, Marc; Bergmann, Dirk [MTU Friedrichshafen GmbH, Friedrichshafen (Germany); Kattwinkel, Peter [Umicore AG und Co. KG, Hanau-Wolfgang (Germany). Geschaeftsbereich Automotive Catalysts; Viehweg, Petra [DB AG, Leipzig (Germany). Bereich Technik Systemverbund und Dienstleistungen

    2010-11-15

    The use of exhaust aftertreatment technology in off-highway applications is not yet universally established. For this reason, MTU Friedrichshafen GmbH and Deutsche Bahn AG conducted a joint research project involving early testing of various basic technologies for exhaust gas aftertreatment (EGA) under real conditions. The knowledge gained in the rail applications sector will be transferrable to other sectors and it will also be possible to combine the basic technologies involved in different ways. (orig.)

  7. Strengthening Clean Energy Technology Cooperation under the UNFCCC: Steps toward Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Benioff, R.; de Coninck, H.; Dhar, S.; Hansen, U.; McLaren, J.; Painuly, J.

    2010-08-01

    Development of a comprehensive and effective global clean technology cooperation framework will require years of experimenting and evaluation with new instruments and institutional arrangements before it is clear what works on which scale and in which region or country. In presenting concrete examples, this paper aims to set the first step in that process by highlighting successful models and innovative approaches that can inform efforts to ramp up clean energy technology cooperation. This paper reviews current mechanisms and international frameworks for global cooperation on clean energy technologies, both within and outside of the UNFCCC, and provides selected concrete options for scaling up global cooperation on clean energy technology RD&D, enabling environment, and financing.

  8. The technology of under-sodium inspection in LMFBR's with particular reference to experimental measurements of the PFR core

    International Nuclear Information System (INIS)

    McKnight, J.A.; Barrett, L.M.; Burton, E.J.; Fothergill, J.R.; Gould, R.F.; Parker, J.A.; Willis, P.; Fenemore, P.

    1985-05-01

    For future Nuclear Fast Reactor systems an expected requirement will be the ability to examine components immersed in the sodium coolant. The potential of ultrasonic technology for this purpose is well illustrated by the successful experiment in the Prototype Fast Reactor at Dounreay in the UK made during the Spring of 1982 by a team from the UKAEA Risley Nuclear Power Development Laboratories. A device was loaded through the top shield of the reactor, and this was used to obtain recognisable images of the tops of reactor core components. Small on-line computers were used to store, assemble and display the images. They were also used for a subsequent analysis which measured the distortion and growth of the components due to irradiation. The experiment enables an assessment to be made of the performance to be expected from future under-sodium instruments. The need for an access manipulator with robotic functions is clear. So too are required improvements in imaging technology to enable targets to be seen whatever their orientation. thus a substantial development programme is envisaged. (author)

  9. Information technology-enabled team-based, patient-centered care: The example of depression screening and management in cancer care.

    Science.gov (United States)

    Randhawa, Gurvaneet S; Ahern, David K; Hesse, Bradford W

    2017-03-01

    The existing healthcare delivery systems across the world need to be redesigned to ensure high-quality care is delivered to all patients. This redesign needs to ensure care is knowledge-based, patient-centered and systems-minded. The rapid advances in the capabilities of information and communication technology and its recent rapid adoption in healthcare delivery have ensured this technology will play a vital role in the redesign of the healthcare delivery system. This commentary highlights promising new developments in health information technology (IT) that can support patient engagement and self-management as well as team-based, patient-centered care. Collaborative care is an effective approach to screen and treat depression in cancer patients and it is a good example of the benefits of team-based and patient-centered care. However, this approach was developed prior to the widespread adoption and use of health IT. We provide examples to illustrate how health IT can improve prevention and treatment of depression in cancer patients. We found several knowledge gaps that limit our ability to realize the full potential of health IT in the context of cancer and comorbid depression care. These gaps need to be filled to improve patient engagement; enhance the reach and effectiveness of collaborative care and web-based programs to prevent and treat depression in cancer patients. We also identify knowledge gaps in health IT design and implementation. Filling these gaps will help shape policies that enable clinical teams to deliver high-quality cancer care globally.

  10. 76 FR 31425 - HIPAA Privacy Rule Accounting of Disclosures Under the Health Information Technology for Economic...

    Science.gov (United States)

    2011-05-31

    ... 164 HIPAA Privacy Rule Accounting of Disclosures Under the Health Information Technology for Economic... Secretary 45 CFR Part 164 RIN 0991-AB62 HIPAA Privacy Rule Accounting of Disclosures Under the Health... accounting of disclosures of protected health information. The purpose of these modifications is, in part, to...

  11. Climate mitigation under an uncertain technology future: A TIAM-World analysis

    International Nuclear Information System (INIS)

    Labriet, Maryse; Kanudia, Amit; Loulou, Richard

    2012-01-01

    This paper explores the impacts of long-term technology and climate uncertainties on the optimal evolution of the World energy system. Stochastic programming with the TIAM-World model is used for a parametric analysis of hedging strategies, varying the probabilities associated to each of two contrasted technology outlooks. The parametric analysis constitutes an original supplement to the computation of hedging strategies by identifying technologies that are robust under a broad range of probabilities of the two technology outlooks. Natural gas appears to be one of the most appealing robust options in an uncertain technological context, especially in China, given its relatively low emissions and the low capital cost of associated technologies. Natural gas and some other options are in fact considered as “super-hedging” actions, penetrating more in the hedging solution than in any of the deterministic scenarios. Nuclear power and CCS use are less robust: they depend much more on either the level of the climate target or the probabilities of the technology outlooks. The analysis also shows that technological uncertainty has a greater impact under milder climate targets than under more severe ones. Future research might consider a larger set of possible technology outlooks, as well as specific analyses focused on key characteristics of low-carbon technologies. - Highlights: ► The hedging strategy is not an average of deterministic strategies. ► The hedging offers a mix of abatement actions that cannot easily be found otherwise. ► Natural gas is an appealing choice in an uncertain context, especially in China. ► China reduces its emissions only when options in other countries are exhausted.

  12. H2020 EU Research & Innovation Program Boost the Transfer of Technological Breakthroughs, Enable New Solutions for Personalised Health and Impact the Industry and Healthcare Systems.

    Science.gov (United States)

    Smit, Paul H; Lymberis, Andreas

    2015-01-01

    , genes) on the spot, with short response times. For the majority of the projects, the planning for the next phase of prototype validation, through product design, supply chain setup, user targeting, clinical validation and commercial roll-out is now taking full attention. However, significant hurdles exist in the successful translation of the new technology to new products. As these technologies are new-to-the-world the resulting products carry a high risk, often necessitating the creation of new companies. Therefore the EU has developed the Horizon 2020 program as a framework for technology development and new business creation. Horizon 2020 is focusing on support for technology transfer, and on building ecosystems and value chains to ensure shorter times-to-market, thus enabling a higher impact of knowledge-based technologies. This paper will argue the necessity of developing these new class of devices, discuss its state-of-the-art, and the challenges for the implementation of Horizon 2020 and the new opportunities in intelligent miniaturized systems for pHealth.

  13. Analysis on Dynamic Decision-Making Model of the Enterprise Technological Innovation Investment under Uncertain Environment

    Directory of Open Access Journals (Sweden)

    Yong Long

    2012-01-01

    Full Text Available Under the environment of fuzzy factors including the return of market, performance of product, and the demanding level of market, we use the method of dynamic programming and establish the model of investment decision, in technology innovation project of enterprise, based on the dynamic programming. Analysis of the influence caused by the changes of fuzzy uncertainty factors to technological innovation project investment of enterprise.

  14. Hydrogen generation, distribution and combustion under severe LWR accident conditions: a state-of-technology report

    International Nuclear Information System (INIS)

    Postma, A.K.; Hilliard, R.K.

    1983-03-01

    This report reviews the current state of technology regarding hydrogen safety issues in light water reactor plants. Topics considered in this report include hydrogen generation, distribution in containment, and combustion characteristics. A companion report addresses hydrogen control. The objectives of the study were to identify the key safety issues related to hydrogen produced under severe accident conditions, to describe the state of technology for each issue, and to point out ongoing programs aimed at resolving the open issues

  15. Enabling Wind Power Nationwide

    Energy Technology Data Exchange (ETDEWEB)

    Jose Zayas, Michael Derby, Patrick Gilman and Shreyas Ananthan,

    2015-05-01

    Leveraging this experience, the U.S. Department of Energy’s (DOE’s) Wind and Water Power Technologies Office has evaluated the potential for wind power to generate electricity in all 50 states. This report analyzes and quantifies the geographic expansion that could be enabled by accessing higher above ground heights for wind turbines and considers the means by which this new potential could be responsibly developed.

  16. A Duopoly Manufacturers’ Game Model Considering Green Technology Investment under a Cap-and-Trade System

    Directory of Open Access Journals (Sweden)

    Yi Zheng

    2018-03-01

    Full Text Available This research studied the duopoly manufacturers’ decision-making considering green technology investment and under a cap-and-trade system. It was assumed there were two manufacturers producing products which were substitutable for one another. On the basis of this assumption, the optimal production capacity, price, and green technology investment of the duopoly manufacturers under a cap-and-trade system were obtained. The increase or decrease of the optimal production quantity of the duopoly manufacturers under a cap-and-trade system was decided by their green technology level. The increase of the optimal price as well as the increase or decrease of the maximum expected profits were decided by the initial carbon emission quota granted by the government. Our research indicates that the carbon emission of unit product is inversely proportional to the market share of an enterprise and becomes an important index to measure the core competitiveness of an enterprise.

  17. Directed International Technological Change and Climate Policy: New Methods for Identifying Robust Policies Under Conditions of Deep Uncertainty

    Science.gov (United States)

    Molina-Perez, Edmundo

    It is widely recognized that international environmental technological change is key to reduce the rapidly rising greenhouse gas emissions of emerging nations. In 2010, the United Nations Framework Convention on Climate Change (UNFCCC) Conference of the Parties (COP) agreed to the creation of the Green Climate Fund (GCF). This new multilateral organization has been created with the collective contributions of COP members, and has been tasked with directing over USD 100 billion per year towards investments that can enhance the development and diffusion of clean energy technologies in both advanced and emerging nations (Helm and Pichler, 2015). The landmark agreement arrived at the COP 21 has reaffirmed the key role that the GCF plays in enabling climate mitigation as it is now necessary to align large scale climate financing efforts with the long-term goals agreed at Paris 2015. This study argues that because of the incomplete understanding of the mechanics of international technological change, the multiplicity of policy options and ultimately the presence of climate and technological change deep uncertainty, climate financing institutions such as the GCF, require new analytical methods for designing long-term robust investment plans. Motivated by these challenges, this dissertation shows that the application of new analytical methods, such as Robust Decision Making (RDM) and Exploratory Modeling (Lempert, Popper and Bankes, 2003) to the study of international technological change and climate policy provides useful insights that can be used for designing a robust architecture of international technological cooperation for climate change mitigation. For this study I developed an exploratory dynamic integrated assessment model (EDIAM) which is used as the scenario generator in a large computational experiment. The scope of the experimental design considers an ample set of climate and technological scenarios. These scenarios combine five sources of uncertainty

  18. Measuring Habitat Quality for Deep-Sea Corals and Sponges to Add Conservation Value to Telepresence-Enabled Science and Technology

    Science.gov (United States)

    Etnoyer, P. J.; Hourigan, T. F.; Reser, B.; Monaco, M.

    2016-02-01

    The growing fleet of telepresence-enabled research vessels equipped with deep-sea imaging technology provides a new opportunity to catalyze and coordinate research efforts among ships. This development is particularly useful for studying the distribution and diversity of deep-sea corals, which occur worldwide from 50 to 8600 m depth. Marine managers around the world seek to conserve these habitats, but require a clear consensus on what types of information are most important and most relevant for marine conservation. The National Oceanic and Atmospheric Administration (NOAA) seeks to develop a reproducible, non-invasive set of ROV methods designed to measure conservation value, or habitat quality, for deep-sea corals and sponges. New tools and methods will be proposed to inform ocean resource management, as well as facilitate research, outreach, and education. A new database schema will be presented, building upon the Ocean Biogeographic Information System (OBIS) and efforts of submersible and ROV teams over the years. Visual information about corals and sponges has proven paramount, particularly high-quality images with standard attributes for marine geology and marine biology, including scientific names, colony size, health, abundance, and density. Improved habitat suitability models can be developed from these data if presence and absence are measured. Recent efforts to incorporate physical sampling into telepresence protocols further increase the value of such information. It is possible for systematic observations with small file sizes to be distributed as geo-referenced, time-stamped still images with environmental variables for water chemistry and a standardized habitat classification. The technique is common among researchers, but a distributed network for this information is still in its infancy. One goal of this presentation is to make progress towards a more integrated network of these measured observations of habitat quality to better facilitate

  19. 75 FR 23214 - HIPAA Privacy Rule Accounting of Disclosures Under the Health Information Technology for Economic...

    Science.gov (United States)

    2010-05-03

    ...-AB62 HIPAA Privacy Rule Accounting of Disclosures Under the Health Information Technology for Economic... disclosures, the administrative burden on covered entities and business associates of accounting for such...: HITECH Accounting of Disclosures, Hubert H. Humphrey Building, Room 509F, 200 Independence Avenue, SW...

  20. Children under Five and Digital Technologies: Implications for Early Years Pedagogy

    Science.gov (United States)

    Palaiologou, Ioanna

    2016-01-01

    This project aimed to investigate the types of digital technologies children under the age of five are using at home and assess the possible implications for early years pedagogy. The research, carried out between 2010 and 2012, was based in four European countries: England, Greece, Malta and Luxemburg. A mixed methods approach was employed to…

  1. 48 CFR 3027.208 - Use of patented technology under the North American Free Trade Agreements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Use of patented technology under the North American Free Trade Agreements. 3027.208 Section 3027.208 Federal Acquisition... American Free Trade Agreements. (f) Contracting officers shall ensure compliance. ...

  2. Sustainability Of Electricity Supply Technologies under German Conditions: A Comparative Evaluation

    International Nuclear Information System (INIS)

    Hirschberg, S; Dones, R.; Heck, T.; Burgherr, P.; Schenler, W.; Bauer, C.

    2004-12-01

    On behalf of the International Committee on Nuclear Technology (ILK) the Paul Scherrer Institut carried out a comparative study addressing the sustainability of electricity supply technologies operating under German-specific conditions. The general objective of this analysis was to provide a support for the formulation of ILK position on the sustainability of various electricity supply technologies, with special emphasis on nuclear energy. The evaluation covers selected current fossil, nuclear and renewable technologies, which are representative for the average conditions in Germany. Two methods of indicator aggregation were employed, i.e. estimation of total (internal and extemal) costs and Multi-criteria Decision Analysis (MCDA). Use of MCDA is motivated by acknowledgement of the role of value judgements in decision-making. Both total costs and MCDA-based technology-specific total scores are useful comparative indicators of sustainability. Sustainability perspective implies a balanced (equal) importance assignment to economic, ecological and social aspects. In summary, this study provides a framework for systematic evaluation of sustainability of energy systems. Refinements of the methodology and specific indicators are feasible. Options for future applications include direct involvement of stakeholders, and evaluations of future technologies and of supply scenarios combining the various candidate technologies. Tools supporting such analyses have been developed by PSI and can be adjusted to the needs of country-specific applications. (author)

  3. Nordic Housing Enabler

    DEFF Research Database (Denmark)

    Helle, Tina; Brandt, Åse

    Development and reliability testing of the Nordic Housing Enabler – an instrument for accessibility assessment of the physical housing. Tina Helle & Åse Brandt University of Lund, Health Sciences, Faculty of Medicine (SE) and University College Northern Jutland, Occupational Therapy department (DK......). Danish Centre for Assistive Technology. Abstract. For decades, accessibility to the physical housing environment for people with functional limitations has been of interest politically, professionally and for the users. Guidelines and norms on accessible housing design have gradually been developed......, however, the built environment shows serious deficits when it comes to accessibility. This study addresses development of a content valid cross-Nordic version of the Housing Enabler and investigation of inter-rater reliability, when used in occupational therapy practice. The instrument was translated from...

  4. Technology Transfer and Climate Change: Additional Considerations for Implementation under the UNFCCC

    Directory of Open Access Journals (Sweden)

    Karen Sullivan

    2011-06-01

    Full Text Available Technology transfer is recognised as playing a central and critical role in the global response to climate change, as embodied in the Unite Nations Framework Convention on Climate Change (UNFCCC. However, technology transfer is a complex process, and despite numerous attempts to prescribe approaches to optimisation, there remain serious obstacles to its effective operation. The breadth of technologies and range of would-be recipient territories under the climate change regime serve to complicate things even further. Against this background, the Expert Group on Technology Transfer have produced a robust Strategy, which it will now fall to the Technology Mechanism announced in Cancun to implement. However, despite the rigour with which the technology transfer strategy was produced, it is never possible to cover all possible eventualities. It is on this basis that this article presents a number of tactical and strategic issues which may merit further consideration as the implementation process moves forward. At the operational level, such issues include a possible role for a centralised or regional technology procurement effort, the need for greater emphasis on sectoral specific approaches to technology transfer, and a pragmatic approach to reducing the impact of some barriers to transactions by the expedient use of insurance to reduce risk, as opposed to the longer term approach of international standardisation. At the strategic level, there are major issues with regard to prioritisation of resources applied to technology transfer, and in particular the resolution of the tensions existing between achieving sustainable development and the time critical need to achieve climate stabilisation.

  5. Environmental policy and environment-saving technologies. Economic aspects of policy making under uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Ossokina, I.

    2003-07-01

    It is generally known that natural environment is profoundly influenced by technological change. The direction and the size of this influence are, however, surrounded by uncertainties, which substantially complicate environmental policy making. This dissertation uses game-theoretical models to study policy making under uncertainty about (a) the costs of technological advances in pollution control, (b) the preferences of the policy maker and the voters, and (c) the consequences of policy measures. From a positive point of view the analysis provides explanations for environmental policies in modern democracies. From a normative point of view it gives a number of recommendations to improve environmental policies.

  6. SciDAC's Earth System Grid Center for Enabling Technologies Semi-Annual Progress Report for the Period April 1, 2009 through September 30, 2009

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Foster, I. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Middleton, D. E. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States)

    2009-10-15

    This report summarizes work carried out by the ESG-CET during the period April 1, 2009 through September 30, 2009. It includes discussion of highlights, overall progress, period goals, collaborations, papers, and presentations. To learn more about our project, and to find previous reports, please visit the Earth System Grid Center for Enabling Technologies (ESG-CET) website. This report will be forwarded to the DOE SciDAC program management, the Office of Biological and Environmental Research (OBER) program management, national and international collaborators and stakeholders (e.g., the Community Climate System Model (CCSM), the Intergovernmental Panel on Climate Change (IPCC) 5th Assessment Report (AR5), the Climate Science Computational End Station (CCES), the SciDAC II: A Scalable and Extensible Earth System Model for Climate Change Science, the North American Regional Climate Change Assessment Program (NARCCAP), and other wide-ranging climate model evaluation activities). During this semi-annual reporting period, the ESG-CET team continued its efforts to complete software components needed for the ESG Gateway and Data Node. These components include: Data Versioning, Data Replication, DataMover-Lite (DML) and Bulk Data Mover (BDM), Metrics, Product Services, and Security, all joining together to form ESG-CET's first beta release. The launch of the beta release is scheduled for late October with the installation of ESG Gateways at NCAR and LLNL/PCMDI. Using the developed ESG Data Publisher, the ESG II CMIP3 (IPCC AR4) data holdings - approximately 35 TB - will be among the first datasets to be published into the new ESG enterprise system. In addition, the NCAR's ESG II data holdings will also be published into the new system - approximately 200 TB. This period also saw the testing of the ESG Data Node at various collaboration sites, including: the British Atmospheric Data Center (BADC), the Max-Planck-Institute for Meteorology, the University of Tokyo

  7. Migration to Current Open Source Technologies by MagIC Enables a More Responsive Website, Quicker Development Times, and Increased Community Engagement

    Science.gov (United States)

    Jarboe, N.; Minnett, R.; Koppers, A.; Constable, C.; Tauxe, L.; Jonestrask, L.

    2017-12-01

    The Magnetics Information Consortium (MagIC) supports an online database for the paleo, geo, and rock magnetic communities ( https://earthref.org/MagIC ). Researchers can upload data into the archive and download data as selected with a sophisticated search system. MagIC has completed the transition from an Oracle backed, Perl based, server oriented website to an ElasticSearch backed, Meteor based thick client website technology stack. Using JavaScript on both the sever and the client enables increased code reuse and allows easy offloading many computational operations to the client for faster response. On-the-fly data validation, column header suggestion, and spreadsheet online editing are some new features available with the new system. The 3.0 data model, method codes, and vocabulary lists can be browsed via the MagIC website and more easily updated. Source code for MagIC is publicly available on GitHub ( https://github.com/earthref/MagIC ). The MagIC file format is natively compatible with the PmagPy ( https://github.com/PmagPy/PmagPy) paleomagnetic analysis software. MagIC files can now be downloaded from the database and viewed and interpreted in the PmagPy GUI based tool, pmag_gui. Changes or interpretations of the data can then be saved by pmag_gui in the MagIC 3.0 data format and easily uploaded to the MagIC database. The rate of new contributions to the database has been increasing with many labs contributing measurement level data for the first time in the last year. Over a dozen file format conversion scripts are available for translating non-MagIC measurement data files into the MagIC format for easy uploading. We will continue to work with more labs until the whole community has a manageable workflow for contributing their measurement level data. MagIC will continue to provide a global repository for archiving and retrieving paleomagnetic and rock magnetic data and, with the new system in place, be able to more quickly respond to the community

  8. DOE SciDAC’s Earth System Grid Center for Enabling Technologies Final Report for University of Southern California Information Sciences Institute

    Energy Technology Data Exchange (ETDEWEB)

    Chervenak, Ann Louise [Univ. of Southern California Information Sciences Inst., Marina del Rey, CA (United States)

    2013-12-19

    The mission of the Earth System Grid Federation (ESGF) is to provide the worldwide climate-research community with access to the data, information, model codes, analysis tools, and intercomparison capabilities required to make sense of enormous climate data sets. Its specific goals are to (1) provide an easy-to-use and secure web-based data access environment for data sets; (2) add value to individual data sets by presenting them in the context of other data sets and tools for comparative analysis; (3) address the specific requirements of participating organizations with respect to bandwidth, access restrictions, and replication; (4) ensure that the data are readily accessible through the analysis and visualization tools used by the climate research community; and (5) transfer infrastructure advances to other domain areas. For the ESGF, the U.S. Department of Energy’s (DOE’s) Earth System Grid Center for Enabling Technologies (ESG-CET) team has led international development and delivered a production environment for managing and accessing ultra-scale climate data. This production environment includes multiple national and international climate projects (such as the Community Earth System Model and the Coupled Model Intercomparison Project), ocean model data (such as the Parallel Ocean Program), observation data (Atmospheric Radiation Measurement Best Estimate, Carbon Dioxide Information and Analysis Center, Atmospheric Infrared Sounder, etc.), and analysis and visualization tools, all serving a diverse user community. These data holdings and services are distributed across multiple ESG-CET sites (such as ANL, LANL, LBNL/NERSC, LLNL/PCMDI, NCAR, and ORNL) and at unfunded partner sites, such as the Australian National University National Computational Infrastructure, the British Atmospheric Data Centre, the National Oceanic and Atmospheric Administration Geophysical Fluid Dynamics Laboratory, the Max Planck Institute for Meteorology, the German Climate Computing

  9. A Petri net-based modelling of replacement strategies under technological obsolescence

    Energy Technology Data Exchange (ETDEWEB)

    Clavareau, Julien [Universite Libre de Bruxelles (U.L.B.), Service de Metrologie Nucleaire, Av. F.D. Roosevelt, 50 (CP165/84), Bruxelles B-1050 (Belgium)], E-mail: jclavare@ulb.ac.be; Labeau, Pierre-Etienne [Universite Libre de Bruxelles (U.L.B.), Service de Metrologie Nucleaire, Av. F.D. Roosevelt, 50 (CP165/84), Bruxelles B-1050 (Belgium)

    2009-02-15

    The technological obsolescence of a unit is characterised by the existence of challenger units displaying identical functionalities, but with higher performances. Though this issue is commonly encountered in practice, it has received little consideration in the literature. Previous exploratory works have treated the problem of replacing old-technology items by new ones, for identical components facing a unique new generation of items. This paper aims to define, in a realistic way, possible replacement policies when several types of challenger units are available and when the performances of these newly available units improve with time. Since no fully generic model can exist in maintenance optimisation, a modular modelling of the problem, allowing easy adaptations to features corresponding to specific applications is highly desirable. This work therefore proposes a modular Petri net model for this problem, underlying a Monte Carlo (MC) estimation of the costs incurred by the different possible replacement strategies under consideration.

  10. Eco-Technology Licensing under Emission Tax: Royalty vs. Fixed-Fee

    OpenAIRE

    Seung-Leul Kim; Sang-Ho Lee

    2014-01-01

    This article considers the licensing strategies of eco-technology when an innovator provides pollution abatement goods to oligopolistic polluting firms that produce consumption goods and emit environmental pollutants. In the presence of emission tax, two types of licensing contracts, royalty and fixed-fee, are examined to analyze market equilibrium and to compare their welfare consequences. We show that an eco-innovator provides a non-exclusive license under a royalty contract while it might ...

  11. Techno-economic viability assessments of greener propulsion technology under potential environmental regulatory policy scenarios

    International Nuclear Information System (INIS)

    Nalianda, D.K.; Kyprianidis, K.G.; Sethi, V.; Singh, R.

    2015-01-01

    Highlights: • An advanced method is presented for techno-economic assessment under potential environmental regulatory policy scenarios. • The viability of the contra-rotating open rotor concept is investigated under various environmental policies. • CO_2 taxation is needed to drive the aerospace industry towards greener solutions. - Abstract: Sustainability of the aviation industry, as any other industry, depends on the elasticity of demand for the product and profitability through minimising operating costs. Of paramount importance is assessing and understanding the interdependency and effects of environmentally optimised solutions and emission mitigation policies. This paper describes the development and application of assessment methodologies to better understand the effects of environmental taxation/energy policies aimed at environmental pollution reduction and the future potential economic impact they may have on the adaptation of “greener” novel technologies. These studies are undertaken using a Techno-economic Environmental Risk Assessment approach. The methodology demonstrated allows the assessment of the economic viability of new technologies compared to conventional technologies, for various CO_2 emission taxation and fuel price scenarios. It considers relative increases in acquisition price and maintenance costs. A study undertaken as a ‘proof of concept’ compares a Counter Rotating Open Rotor aircraft with a conventional aircraft for short range operations. It indicates that at current fuel price and with no carbon taxation, a highly fuel efficient technology, such as the one considered, could be rendered economically unviable. The work goes on to demonstrate that in comparison to the conventional aircraft, any economic benefits that may be accrued from improvement in fuel consumption through such a technology, may well be negated through increases in acquisition price and maintenance costs. The work further demonstrates that if policy

  12. An IT-enabled supply chain model: a simulation study

    Science.gov (United States)

    Cannella, Salvatore; Framinan, Jose M.; Barbosa-Póvoa, Ana

    2014-11-01

    During the last decades, supply chain collaboration practices and the underlying enabling technologies have evolved from the classical electronic data interchange (EDI) approach to a web-based and radio frequency identification (RFID)-enabled collaboration. In this field, most of the literature has focused on the study of optimal parameters for reducing the total cost of suppliers, by adopting operational research (OR) techniques. Herein we are interested in showing that the considered information technology (IT)-enabled structure is resilient, that is, it works well across a reasonably broad range of parameter settings. By adopting a methodological approach based on system dynamics, we study a multi-tier collaborative supply chain. Results show that the IT-enabled supply chain improves operational performance and customer service level. Nonetheless, benefits for geographically dispersed networks are of minor entity.

  13. Air Vehicle Technology Integration Program (AVTIP) Delivery Order 0015: Open Control Platform (OCP) Software Enabled Control (SEC) Hardware in the Loop Simulation - OCP Hardware Integration

    National Research Council Canada - National Science Library

    Paunicka, James L

    2005-01-01

    ...) project sponsored by the DARPA Software Enabled Control (SEC) Program. The purpose of this project is to develop the capability to be an OCP test-bed and to evaluate the OCP controls and simulation environment for a specific test case...

  14. Managing Psychiatrist-Patient Relationships in the Digital Age: a Summary Review of the Impact of Technology-enabled Care on Clinical Processes and Rapport.

    Science.gov (United States)

    Parish, Michelle Burke; Fazio, Sarina; Chan, Steven; Yellowlees, Peter M

    2017-10-27

    Participatory medicine and the availability of commercial technologies have given patients more options to view and track their health information and to communicate with their providers. This shift in the clinical process may be of particular importance in mental healthcare where rapport plays a significant role in the therapeutic process. In this review, we examined literature related to the impact of technology on the clinical workflow and patient-provider rapport in the mental health field between January 2014 and June 2017. Thirty three relevant articles, of 226 identified articles, were summarized. The use of technology clinically has evolved from making care more accessible and efficient to leveraging technology to improve care, communication, and patient-provider rapport. Evidence exists demonstrating that information and communication technologies may improve care by better connecting patients and providers and by improving patient-provider rapport, although further research is needed.

  15. Clean energy technology transfer. A review of programs under the UNFCCC

    International Nuclear Information System (INIS)

    Kline, D.; Vimmerstedt, L.; Benioff, R.

    2004-01-01

    This paper describes the experience and results of programs designed to operationalize the technology transfer provisions of the United Nations Framework Convention on Climate Change (UNFCCC). These programs share a common goal of demonstrating modalities for developed country parties to fulfill their obligation under the UNFCCC to support technology transfer to developing country parties that facilitates their participation in global efforts to combat climate changes. Several related U.S. bilateral programs and programs supported by the Climate Technology Initiative, a multilateral effort on behalf of a number of Organization for Economic Cooperation and Development (OECD) countries, are included in this review. The discussion highlights a number of common elements of the approaches of many of these programs as well as some differences. It presents case studies that focus on methods and results in China, Mexico, and Southern Africa, and catalogues and describes the implementation activities and results that these programs have achieved. It concludes by assessing the implications of this experience for the international community as it moves forward with the climate change technology transfer enterprise

  16. Production System of Peranakan Etawah Goat under Application of Feed Technology: Productivity and Economic Efficiency

    Directory of Open Access Journals (Sweden)

    Akhmad Sodiq

    2009-09-01

    Full Text Available Feed resources are the major constraint in increasing goat production in the village. The main constraints to goat raising are related to feeds (i the high cost of transport of crop residues and grass to the homesteads, (ii the low nutritive value of feeds used, particularly in the dry period. This research was design to evaluate goat productivity and economic efficiency of goat farming under application of feed technology production system in Peranakan Etawah goat farmer group of Gumelar Banyumas Central Java. All farmers were taken as respondents using census methods. On farm research with participative focused group discussion, indepth interview, and farm observation. Descriptive analysis and independent t test methods were used to analyze the data. Results of this study showed that there was a significant improvement goat productivity on production system with the application of feed technology. Body weight at weaning, survival rate till weaning, and doe productivity were increased 7%, 2% and 5%, respectively. There was no evidence of significant different of farmers income and economic efficiency before and after the applied feed technology (P>0.05. The calculation was based on cash flow. Before application, farmers income per year and economic efficiency were Rp14.404.520,00 and 1.21, then insignificantly improve into Rp16.487.100,00 and 1.27, respectively. (Animal Production 11(3: 202-208 (2009 Key Words: Livestock production system, Peranakan Etawah goat, feed technology aplication, productivity and economic efficiency

  17. Changes in the fertility of a leached chernozem under different primary tillage technologies

    Science.gov (United States)

    Korolev, V. A.; Gromovik, A. I.; Borontov, O. K.

    2016-01-01

    Changes in the fertility of a leached chernozem under different tillage technologies (moldboard, non-inversive, and combined tillage) were studied in a multifactor stationary field experiment established in 1985 in Voronezh oblast on a low-humus medium-deep light clayey leached chernozem. The nine-field rotation of cereals and sugar beet was practiced. It was found that the major parameters of soil fertility—the content and qualitative composition of humus and the physicochemical and physical properties of the chernozem—remained relatively stable independently from the applied primary tillage technologies. However, taking into account economic characteristics (crop yields, production costs, energy expenses, etc.), the combined tillage system proved to be most efficient. It can be recommended for cereals-sugar beet rotation systems in the central chernozemic region, as it ensures the highest efficiency of crop growing and preserves the fertility of leached chernozems.

  18. Appropriate technology for domestic wastewater management in under-resourced regions of the world

    Science.gov (United States)

    Oladoja, Nurudeen Abiola

    2017-11-01

    Centralized wastewater management system is the modern day waste management practice, but the high cost and stringent requirements for the construction and operation have made it less attractive in the under-resourced regions of the world. Considering these challenges, the use of decentralized wastewater management system, on-site treatment system, as an appropriate technology for domestic wastewater treatment is hereby advocated. Adopting this technology helps save money, protects home owners' investment, promotes better watershed management, offers an appropriate solution for low-density communities, provides suitable alternatives for varying site conditions and furnishes effective solutions for ecologically sensitive areas. In the light of this, an overview of the on-site treatment scheme, at the laboratory scale, pilot study stage, and field trials was conducted to highlight the operational principles' strength and shortcomings of the scheme. The operational requirements for the establishing and operation of the scheme and best management practice to enhance the performance and sustenance were proffered.

  19. Fluid Vessel Quantity using Non-Invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

    Science.gov (United States)

    Garofalo, Anthony A.

    2013-01-01

    The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

  20. Effect of technological procedures on the crack resistance of nickel alloy welded joints under heat treatment

    International Nuclear Information System (INIS)

    Bagdasarov, Yu.S.; Sorokin, L.I.; Yakushin, B.F.; Moryashchev, S.F.

    1983-01-01

    Comparison of the efficiency of some technological procedures directed to the increase of crack resistance of KhN50MBKTYUR (EhP99) alloy welded joints under heat treatment was conducted. Welded joints were manufactured by the methods of electron beam welding, laser welding, automatic argon-arc welding. The latter was conducted by conventional technology as well as with electromagnetic mixing of liquid metal of welding bath, with compulsory cooling of weld matal, with pulse arc. It is shown that the high fracture resistance of welded joints, manufactured by electron beam and laser welding is achieved by combination of high mechanical properties of heat affected zone metal and reduced elastic potential energy margin of residual welding stresses (as compared to argon-arc welding)

  1. Displays enabling mobile multimedia

    Science.gov (United States)

    Kimmel, Jyrki

    2007-02-01

    With the rapid advances in telecommunications networks, mobile multimedia delivery to handsets is now a reality. While a truly immersive multimedia experience is still far ahead in the mobile world, significant advances have been made in the constituent audio-visual technologies to make this become possible. One of the critical components in multimedia delivery is the mobile handset display. While such alternatives as headset-style near-to-eye displays, autostereoscopic displays, mini-projectors, and roll-out flexible displays can deliver either a larger virtual screen size than the pocketable dimensions of the mobile device can offer, or an added degree of immersion by adding the illusion of the third dimension in the viewing experience, there are still challenges in the full deployment of such displays in real-life mobile communication terminals. Meanwhile, direct-view display technologies have developed steadily, and can provide a development platform for an even better viewing experience for multimedia in the near future. The paper presents an overview of the mobile display technology space with an emphasis on the advances and potential in developing direct-view displays further to meet the goal of enabling multimedia in the mobile domain.

  2. Efficacy of a Community-Based Technology-Enabled Physical Activity Counseling Program for People With Knee Osteoarthritis: Proof-of-Concept Study.

    Science.gov (United States)

    Li, Linda C; Sayre, Eric C; Xie, Hui; Falck, Ryan S; Best, John R; Liu-Ambrose, Teresa; Grewal, Navi; Hoens, Alison M; Noonan, Greg; Feehan, Lynne M

    2018-04-30

    Current practice guidelines emphasize the use of physical activity as the first-line treatment of knee osteoarthritis; however, up to 90% of people with osteoarthritis are inactive. We aimed to assess the efficacy of a technology-enabled counseling intervention for improving physical activity in people with either a physician-confirmed diagnosis of knee osteoarthritis or having passed two validated criteria for early osteoarthritis. We conducted a proof-of-concept randomized controlled trial. The immediate group received a brief education session by a physical therapist, a Fitbit Flex, and four biweekly phone calls for activity counseling. The delayed group received the same intervention 2 months later. Participants were assessed at baseline (T0) and at the end of 2 months (T1), 4 months (T2), and 6 months (T3). Outcomes included (1) mean time on moderate-to-vigorous physical activity (MVPA ≥3 metabolic equivalents [METs], primary outcome), (2) mean time on MVPA ≥4 METs, (3) mean daily steps, (4) mean time on sedentary activities, (5) Knee Injury and Osteoarthritis Outcome Score (KOOS), and (6) Partners in Health scale. Mixed-effects repeated measures analysis of variance was used to assess five planned contrasts of changes in outcome measures over measurement periods. The five contrasts were (1) immediate T1-T0 vs delayed T1-T0, (2) delayed T2-T1 vs delayed T1-T0, (3) mean of contrast 1 and contrast 2, (4) immediate T1-T0 vs delayed T2-T1, and (5) mean of immediate T2-T1 and delayed T3-T2. The first three contrasts estimate the between-group effects. The latter two contrasts estimate the effect of the 2-month intervention delay on outcomes. We recruited 61 participants (immediate: n=30; delayed: n=31). Both groups were similar in age (immediate: mean 61.3, SD 9.4 years; delayed: mean 62.1, SD 8.5 years) and body mass index (immediate: mean 29.2, SD 5.5 kg/m 2 ; delayed: mean 29.2, SD 4.8 kg/m 2 ). Contrast analyses revealed significant between-group effects in

  3. Estimating the Theoretical Value for LAN Network Throughput Based Power Line Communications Technology Under the Homeplug 1.0 Standard

    Directory of Open Access Journals (Sweden)

    Martha Fabiola Contreras Higuera

    2013-06-01

    Full Text Available Power Line Communications (PLC refers to a group of technologies that allow to establish communication processes under the use of the grid as a physical means of transmission. The use of the grid as a physical means of transmission of information is not a new idea. Until a few years ago, the use of PLC had been limited to the implementation of solutions of control, automation and monitoring of sensors; which did not require a high bandwidth for its operation.During the late 1990s due to the new technological developments and the need to implement new alternatives for transfer of information, it was possible to reach speeds on the order of the Mbps, establishing the possibility of making use of the electricity network as a network of access. The current state of technology PLC allows to reach speeds of up to 200Mbps, which has enabled the transformation of the grid in a true network of band wide, capable of supporting data, voice and video provided by a telecommunications operator. The use of PLC-based network adapters allow easily design LANs and broadband communications through the electrical network, making any outlet in a point of connection for the user, without the need for wiring additional to existing ones.  The electrical network is a structure which so far has been exclusively used for the transport of electrical energy. However, it is possible to make use of this network in processes of communication and transmission of information such as: voice, data and video; Bearing in mind that grid had not been designed for this purpose. The performance is without doubt one of the aspects of greatest interest in the global analysis in networks LAN, due to the effect it produces on the end user. Basically, the most common parameters for evaluating the performance of a network are: Throughput, use of the canal and various measures of retardation. In this article is presented a simple analysis of the HomePlug 1.0 standard applied to the

  4. Under-Sodium Viewing: A Review of Ultrasonic Imaging Technology for Liquid Metal Fast Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Jeffrey W.; Peters, Timothy J.; Posakony, Gerald J.; Chien, Hual-Te; Bond, Leonard J.; Denslow, Kayte M.; Sheen, Shuh-Haw; Raptis, Paul

    2009-03-27

    This current report is a summary of information obtained in the "Information Capture" task of the U.S. DOE-funded "Under Sodium Viewing (USV) Project." The goal of the multi-year USV project is to design, build, and demonstrate a state-of-the-art prototype ultrasonic viewing system tailored for periodic reactor core in-service monitoring and maintenance inspections. The study seeks to optimize system parameters, improve performance, and re-establish this key technology area which will be required to support any new U.S. liquid-metal cooled fast reactors.

  5. Political Economy and Irrigation Technology Adoption Implications of Water Pricing under Asymmetric Information

    OpenAIRE

    Dridi, Chokri; Khanna, Madhu

    2005-01-01

    We analyze the design of water pricing rules emerging from farmers' lobbying and their implications for the size of the lobby, water use, profits and social welfare. The lobbying groups are the adopters of modern irrigation technology and the non-adopters. The pricing rules are designed to meet budget balance of water provision; we considered (i) a two-part tariff composed of a mandatory per-acre fee plus a volumetric charge and (ii) a nonlinear pricing schedule. Our results show that under e...

  6. Under-Sodium Viewing: A Review of Ultrasonic Imaging Technology for Liquid Metal Fast Reactors

    International Nuclear Information System (INIS)

    Griffin, Jeffrey W.; Peters, Timothy J.; Posakony, Gerald J.; Chien, Hual-Te; Bond, Leonard J.; Denslow, Kayte M.; Sheen, Shuh-Haw; Raptis, Paul

    2009-01-01

    This current report is a summary of information obtained in the 'Information Capture' task of the U.S. DOE-funded 'Under Sodium Viewing (USV) Project.' The goal of the multi-year USV project is to design, build, and demonstrate a state-of-the-art prototype ultrasonic viewing system tailored for periodic reactor core in-service monitoring and maintenance inspections. The study seeks to optimize system parameters, improve performance, and re-establish this key technology area which will be required to support any new U.S. liquid-metal cooled fast reactors.

  7. Storage potential of ‘SCS426 Venice’ apples under different storage technologies

    Directory of Open Access Journals (Sweden)

    Mariuccia Schlichting de Martin

    2018-04-01

    Full Text Available Abstract This study aimed to evaluate the storage potential of SCS426 Venice apples under different storage technologies. Fruits were harvested in an experimental orchard located in Fraiburgo, SC and stored for up to eight and ten months in 2013 and 2014, respectively. Apples were treated or not with methylcyclopropene (1-MCP and stored under air atmosphere (AA, 0.5±0.5 °C/RH 85±5% or controlled atmosphere (CA; 1.5 kPa of O2 and 1.5 kPa of CO2 at 0.7±0.5 °C/RH of 93±3%. Fruits were evaluated every two months of storage, after one and seven days of shelf life (23 ± 0.3 °C/RH 93±3%. The storage period of ‘SCS426 Venice’ apples under AA without 1-MCP application should not extend beyond six months. Under this storage condition, fruits had higher incidence of decay, ethylene production and respiratory rates, higher skin degreening, lower flesh firmness, titratable acidity and soluble solids content than fruits stored under CA or AA with 1-MCP. ‘SCS426 Venice’ apples develop flesh browning and superficial scald after long-term storage. ‘SCS426 Venice’ apples under AA treated with 1-MCP or under CA (regardless of 1-MCP application can be stored for more than eight months, keeping flesh firmness above 14 lb and low incidence of physiological disorders even after ten months of storage.

  8. Enabling graphene nanoelectronics.

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Wei; Ohta, Taisuke; Biedermann, Laura Butler; Gutierrez, Carlos; Nolen, C. M.; Howell, Stephen Wayne; Beechem Iii, Thomas Edwin; McCarty, Kevin F.; Ross, Anthony Joseph, III

    2011-09-01

    Recent work has shown that graphene, a 2D electronic material amenable to the planar semiconductor fabrication processing, possesses tunable electronic material properties potentially far superior to metals and other standard semiconductors. Despite its phenomenal electronic properties, focused research is still required to develop techniques for depositing and synthesizing graphene over large areas, thereby enabling the reproducible mass-fabrication of graphene-based devices. To address these issues, we combined an array of growth approaches and characterization resources to investigate several innovative and synergistic approaches for the synthesis of high quality graphene films on technologically relevant substrate (SiC and metals). Our work focused on developing the fundamental scientific understanding necessary to generate large-area graphene films that exhibit highly uniform electronic properties and record carrier mobility, as well as developing techniques to transfer graphene onto other substrates.

  9. High tolerance to temperature and salinity change should enable scleractinian coral Platygyra acuta from marginal environments to persist under future climate change.

    Directory of Open Access Journals (Sweden)

    Apple Pui Yi Chui

    Full Text Available With projected changes in the marine environment under global climate change, the effects of single stressors on corals have been relatively well studied. However, more focus should be placed on the interactive effects of multiple stressors if their impacts upon corals are to be assessed more realistically. Elevation of sea surface temperature is projected under global climate change, and future increases in precipitation extremes related to the monsoon are also expected. Thus, the lowering of salinity could become a more common phenomenon and its impact on corals could be significant as extreme precipitation usually occurs during the coral spawning season. Here, we investigated the interactive effects of temperature [24, 27 (ambient, 30, 32°C] and salinity [33 psu (ambient, 30, 26, 22, 18, 14 psu] on larval settlement, post-settlement survival and early growth of the dominant coral Platygyra acuta from Hong Kong, a marginal environment for coral growth. The results indicate that elevated temperatures (+3°C and +5°C above ambient did not have any significant effects on larval settlement success and post-settlement survival for up to 56 days of prolonged exposure. Such thermal tolerance was markedly higher than that reported in the literature for other coral species. Moreover, there was a positive effect of these elevated temperatures in reducing the negative effects of lowered salinity (26 psu on settlement success. The enhanced settlement success brought about by elevated temperatures, together with the high post-settlement survival recorded up to 44 and 8 days of exposure under +3°C and +5°C ambient respectively, resulted in the overall positive effects of elevated temperatures on recruitment success. These results suggest that projected elevation in temperature over the next century should not pose any major problem for the recruitment success of P. acuta. The combined effects of higher temperatures and lowered salinity (26 psu could

  10. Financial risk management for new technology integration in energy planning under uncertainty

    International Nuclear Information System (INIS)

    Ahmed, Sajjad; Elsholkami, Mohamed; Elkamel, Ali; Du, Juan; Ydstie, Erik B.; Douglas, Peter L.

    2014-01-01

    Highlights: • Financial risk associated with over or underproduction of electricity is studied. • A two-stage stochastic model that considers parameter uncertainties is developed. • The model was applied to a real case to meet projected electricity demand of a fleet of generating stations. • Incorporation of financial risk resulted in an increase in electricity cost. • The selection of technologies was the same as that obtained from a deterministic model. - Abstract: This paper proposes a new methodology to include financial risk management in the framework of two-stage stochastic programming for energy planning under uncertainties in demand and fuel price. A deterministic mixed integer linear programming formulation is extended to a two-stage stochastic programming model in order to take into account random parameters that have discrete and finite probabilistic distributions. This was applied to a case study focusing on planning the capacity supply to meet the projected electricity demand for the fleet of electricity generation stations owned and operated by Ontario Power Generation (OPG). The objective of the proposed mathematical model is to minimize cost subject to environmental constraints. The case study is investigated by considering only existing technologies and also by considering the integration of new technologies that help achieve stricter carbon reduction requirements

  11. Formatively Assessing Teamwork in Technology-Enabled Twenty-First Century Classrooms: Exploratory Findings of a Teamwork Awareness Programme in Singapore

    Science.gov (United States)

    Koh, Elizabeth; Hong, Helen; Tan, Jennifer Pei-Ling

    2018-01-01

    Teamwork, one of the core competencies for the twenty-first century learner, is a critical skill for work and learning. However, assessing teamwork is complex, in particular, developing a measure of teamwork that is domain-generic and applicable across a wide range of learners. This paper documents one such study that leverages technology to help…

  12. Robust binding between carbon nitride nanosheets and a binuclear ruthenium(II) complex enabling durable, selective CO{sub 2} reduction under visible light in aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Kuriki, Ryo; Ishitani, Osamu; Maeda, Kazuhiko [Department of Chemistry, School of Science, Tokyo Institute of Technology (Japan); Yamamoto, Muneaki; Yoshida, Tomoko [Advanced Research Institute for Natural Science and Technology, Osaka City University (Japan); Higuchi, Kimitaka; Yamamoto, Yuta; Akatsuka, Masato; Yagi, Shinya [Institute of Materials and Systems for Sustainability, Nagoya University (Japan); Lu, Daling [Suzukakedai Materials Analysis Division, Technical Department, Tokyo Institute of Technology, Yokohama (Japan)

    2017-04-18

    Carbon nitride nanosheets (NS-C{sub 3}N{sub 4}) were found to undergo robust binding with a binuclear ruthenium(II) complex (RuRu') even in basic aqueous solution. A hybrid material consisting of NS-C{sub 3}N{sub 4} (further modified with nanoparticulate Ag) and RuRu' promoted the photocatalytic reduction of CO{sub 2} to formate in aqueous media, in conjunction with high selectivity (approximately 98 %) and a good turnover number (>2000 with respect to the loaded Ru complex). These represent the highest values yet reported for a powder-based photocatalytic system during CO{sub 2} reduction under visible light in an aqueous environment. We also assessed the desorption of RuRu' from the Ag/C{sub 3}N{sub 4} surface, a factor that can contribute to a loss of activity. It was determined that desorption is not induced by salt additives, pH changes, or photoirradiation, which partly explains the high photocatalytic performance of this material. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. Enabling distributed petascale science

    International Nuclear Information System (INIS)

    Baranovski, Andrew; Bharathi, Shishir; Bresnahan, John

    2007-01-01

    Petascale science is an end-to-end endeavour, involving not only the creation of massive datasets at supercomputers or experimental facilities, but the subsequent analysis of that data by a user community that may be distributed across many laboratories and universities. The new SciDAC Center for Enabling Distributed Petascale Science (CEDPS) is developing tools to support this end-to-end process. These tools include data placement services for the reliable, high-performance, secure, and policy-driven placement of data within a distributed science environment; tools and techniques for the construction, operation, and provisioning of scalable science services; and tools for the detection and diagnosis of failures in end-to-end data placement and distributed application hosting configurations. In each area, we build on a strong base of existing technology and have made useful progress in the first year of the project. For example, we have recently achieved order-of-magnitude improvements in transfer times (for lots of small files) and implemented asynchronous data staging capabilities; demonstrated dynamic deployment of complex application stacks for the STAR experiment; and designed and deployed end-to-end troubleshooting services. We look forward to working with SciDAC application and technology projects to realize the promise of petascale science

  14. The yeast ADH7 promoter enables gene expression under pronounced translation repression caused by the combined stress of vanillin, furfural, and 5-hydroxymethylfurfural.

    Science.gov (United States)

    Ishida, Yoko; Nguyen, Trinh Thi My; Izawa, Shingo

    2017-06-20

    Lignocellulosic biomass conversion inhibitors such as vanillin, furfural, and 5-hydroxymethylfurfural (HMF) inhibit the growth of and fermentation by Saccharomyces cerevisiae. A high concentration of each fermentation inhibitor represses translation and increases non-translated mRNAs. We previously reported that the mRNAs of ADH7 and BDH2, which encode putative NADPH- and NADH-dependent alcohol dehydrogenases, respectively, were efficiently translated even with translation repression in response to severe vanillin stress. However, the combined effects of these fermentation inhibitors on the expression of ADH7 and BDH2 remain unclear. We herein demonstrated that exposure to a combined stress of vanillin, furfural, and HMF repressed translation. The protein synthesis of Adh7, but not Bdh2 was significantly induced under combined stress conditions, even though the mRNA levels of ADH7 and BDH2 were up-regulated. Additionally, adh7Δ cells were more sensitive to the combined stress than wild-type and bdh2Δ cells. These results suggest that induction of the ADH7 expression plays a role in the tolerance to the combined stress of vanillin, furfural, and HMF. Furthermore, we succeeded in improving yeast tolerance to the combined stress by controlling the expression of ALD6 with the ADH7 promoter. Our results demonstrate that the ADH7 promoter can overcome the pronounced translation repression caused by the combined stress of vanillin, furfural, and HMF, and also suggest a new gene engineering strategy to breed robust and optimized yeasts for bioethanol production from a lignocellulosic biomass. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Enabling Access to Medical and Health Education in Rwanda Using Mobile Technology: Needs Assessment for the Development of Mobile Medical Educator Apps.

    Science.gov (United States)

    Rusatira, Jean Christophe; Tomaszewski, Brian; Dusabejambo, Vincent; Ndayiragije, Vincent; Gonsalves, Snedden; Sawant, Aishwarya; Mumararungu, Angeline; Gasana, George; Amendezo, Etienne; Haake, Anne; Mutesa, Leon

    2016-06-01

    Lack of access to health and medical education resources for doctors in the developing world is a serious global health problem. In Rwanda, with a population of 11 million, there is only one medical school, hence a shortage in well-trained medical staff. The growth of interactive health technologies has played a role in the improvement of health care in developed countries and has offered alternative ways to offer continuous medical education while improving patient's care. However, low and middle-income countries (LMIC) like Rwanda have struggled to implement medical education technologies adapted to local settings in medical practice and continuing education. Developing a user-centered mobile computing approach for medical and health education programs has potential to bring continuous medical education to doctors in rural and urban areas of Rwanda and influence patient care outcomes. The aim of this study is to determine user requirements, currently available resources, and perspectives for potential medical education technologies in Rwanda. Information baseline and needs assessments data collection were conducted in all 44 district hospitals (DHs) throughout Rwanda. The research team collected qualitative data through interviews with 16 general practitioners working across Rwanda and 97 self-administered online questionnaires for rural areas. Data were collected and analyzed to address two key questions: (1) what are the currently available tools for the use of mobile-based technology for medical education in Rwanda, and (2) what are user's requirements for the creation of a mobile medical education technology in Rwanda? General practitioners from different hospitals highlighted that none of the available technologies avail local resources such as the Ministry of Health (MOH) clinical treatment guidelines. Considering the number of patients that doctors see in Rwanda, an average of 32 patients per day, there is need for a locally adapted mobile education app

  16. A Framework for Developing Effective Technology-Enabled Distance Education Programs in Management: A Study of a Video Conference-Based Program in an Indian Perspective

    OpenAIRE

    Jaydeep Mukherje; Mukti Mishra

    2014-01-01

    A major problem in delivering quality management education to working executives in India has been the inability of the candidates to leave their job for a prolonged period of time to attend the on-campus management programs. With the proliferation of two way Video Conferencing (VC) facilities across the country, as well as the use of Internet technology, this limitations could quite effectively be overcome for both students and management educators.

  17. The Small Payload Access to Space Experiment (SPASE): Using Non-Traditional Aerospace Technology to Enable a New Generation of Low-Cost Missions

    OpenAIRE

    McDermott, Scott; Aamot, L. Eric

    2001-01-01

    Launching on STS-108 Endeavour in late 2001, the Small Payload Access to Space Experiment (SPASE) demonstrates a number of new technologies, efficient ways to conduct a nanospacecraft development program, and how to take such a spacecraft through the Shuttle Hitchhiker safety and integration process. This paper describes the essential “lessons learned” in each of these areas. Commercial solar panels, batteries, imagers, photocells, integrated circuits, and manufacturing techniques are used th...

  18. Environmental Policy and Technology Diffusion under Imperfect Competition. An Evolutionary Game Theoretical Approach

    Energy Technology Data Exchange (ETDEWEB)

    De Vries, F.P.

    2003-05-01

    is the start of the actual evolutionary game modelling and analysis of diffusion of an abatement technology within an imperfect competitive product market. A parametric Cournot model is introduced that allows for both heterogeneous and homogeneous products, which can be produced by means of a dirty technology with high emissions per unit of production or with a clean technology which generates lower emissions per unit of output. We shall, however, mainly emphasize the case of product differentiation. The model in chapter 6 abstracts from any form of environmental regulation and will serve as a benchmark. The model as presented in chapter 6 is adjusted for environmental policy in chapters 7 and 8. Chapter 7 analyzes the diffusion process of clean technology under the policy regimes emission taxation and subsidies per unit of emission reduction. The instruments tradable emission permits and tradable emission credits are examined in chapter 8. In chapter 9, the four instruments will be compared to each other on the basis of their corresponding diffusion incentives and welfare. Moreover, a scenario study is conducted in order to explore the effects of differences in the technologies' pollution intensiveness and the cost structure of the firms. The thesis is finalized by chapter 10, which contains a synthesis of the major results and conclusions.

  19. Advanced Technology in Small Packages Enables Space Science Research Nanosatellites: Examples from the NASA Miniature X-ray Solar Spectrometer CubeSat

    Science.gov (United States)

    Woods, T. N.

    2017-12-01

    Nanosatellites, including the CubeSat class of nanosatellites, are about the size of a shoe box, and the CubeSat modular form factor of a Unit (1U is 10 cm x 10 cm x 10 cm) was originally defined in 1999 as a standardization for students developing nanosatellites. Over the past two decades, the satellite and instrument technologies for nanosatellites have progressed to the sophistication equivalent to the larger satellites, but now available in smaller packages through advanced developments by universities, government labs, and space industries. For example, the Blue Canyon Technologies (BCT) attitude determination and control system (ADCS) has demonstrated 3-axis satellite control from a 0.5-Unit system with 8 arc-second stability using reaction wheels, torque rods, and a star tracker. The first flight demonstration of the BCT ADCS was for the NASA Miniature X-ray Solar Spectrometer (MinXSS) CubeSat. The MinXSS CubeSat mission, which was deployed in May 2016 and had its re-entry in May 2017, provided space weather measurements of the solar soft X-rays (SXR) variability using low-power, miniaturized instruments. The MinXSS solar SXR spectra have been extremely useful for exploring flare energetics and also for validating the broadband SXR measurements from the NOAA GOES X-Ray Sensor (XRS). The technology used in the MinXSS CubeSat and summary of science results from the MinXSS-1 mission will be presented. Web site: http://lasp.colorado.edu/home/minxss/

  20. Methodology for designing, implementing and evaluating assistive mobility technology to enable the social inclusion and independence needs of an ageing population

    DEFF Research Database (Denmark)

    Morrison, Ann; Andersen, Hans Jørgen; Malmborg, Lone

    2011-01-01

    Seamless mobile navigation will reinforce social inclusion of people with Mild Cognitive Impairment (MCI) and will lower their anxiety levels when mobile in their usual habitats as they have at hand a means to support them in cases such as where they lose their way or forget where they were going....... We have continued development from existing studies of vibrotactile displays (Van Erp, 2007), for our first prototype of a wearable assistive navigation device that gives a range of sensitive haptic feedback as part of an intended larger project. The larger project will develop methods and technology...

  1. The under sink garbage grinder: a friendly technology for the environment.

    Science.gov (United States)

    Bolzonella, D; Pavan, P; Battistoni, P; Cecchi, F

    2003-03-01

    The use of garbage grinders is not a usual practice in Europe, but it is in other countries around the world (e.g., North America, Japan and Australia). Sometimes, garbage grinders are accused of producing problems in sewers and wastewater treatment plants and are prohibited by environmental protection laws. In this study, the different impacts determined by the use of this technology were considered to show the positive impacts of its use. In particular, it was shown that garbage grinders enable the disposal of household organic wastes with advantages for the wastewater treatment processes because of an increase in the carbon/nutrients ratio in the wastewater. This is particularly important for biological nutrients removal processes. Daily specific contributions for person equivalent (PE) due to organic waste disposal through garbage grinders were found to be equal to 75 gCODPE(-1) d(-1) for carbon (as COD), 2.5 gNPE(-1) d(-1) for nitrogen and 0.25 gPPE(-1) d(-1) for phosphorous, respectively. Those determined a value of 30 for the COD/N ratio. Moreover, no problems with solids settling in sewers were noted. These results were extensively compared with literature data. The economical balance showed that the use of garbage grinders allowed a global saving of some 17 Euro year(-1) for a three people family. Important benefits are also gained from an environmental point of view (e.g, organic wastes disposal nutrients removal in wastewater treatment and increase in biogas production with energy reclamation).

  2. Sustainability Of Electricity Supply Technologies Under German Conditions: A Comparative Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Hirschberg, S.; Dones, R.; Heck, T.; Burgherr, P.; Schenler, W.; Bauer, C

    2005-03-01

    The study reported here is intended to provide a framework for a systematic comparative evaluation of the sustainability of energy systems. The existing, representative evaluation criteria and indicators, recently proposed by competent international organisations, have first been reviewed. Based on this survey, and the experience gained at PSI from previous evaluation studies, a set of criteria and indicators for use in the present project have been established. Main efforts have focussed on the generation of quantitative, technology-specific, economic, environmental and social indicators. A number of methods have been employed, including Life Cycle Assessment (LCA), Risk Assessment (RA), and the Impact Pathway Approach (IPA). Some new, advanced methodologies have also been implemented, in particular an improved link between LCA and impact estimation, and an enhanced treatment of site-dependent effects. Two methods of indicator aggregation were employed: namely, the estimation of total (internal and external) costs, and Multi-Criteria Decision Analysis (MCDA). Use of MCDA is motivated principally by the acknowledgement of the role of value judgments in decision-making. In terms of total costs, nuclear power displays top performance under German conditions, superior to all other currently implemented technologies. Evaluations employing a variety of sustainability criteria result in a fragmented picture of the merits and drawbacks of the currently available electricity supply options. No single system exhibits superior performance on the basis of all criteria. MCDA ranking based on the three pillars of sustainability of economy, ecology and social, is relatively robust if the pillars are considered to be equally important, and the weighting of lower-level criteria (e.g. financial requirements or employment effects) is subject to variation. Placing emphasis on economy penalizes renewables, while emphasis on the environment penalizes fossil systems, and emphasis on

  3. Sustainability Of Electricity Supply Technologies Under German Conditions: A Comparative Evaluation

    International Nuclear Information System (INIS)

    Hirschberg, S.; Dones, R.; Heck, T.; Burgherr, P.; Schenler, W.; Bauer, C.

    2005-01-01

    The study reported here is intended to provide a framework for a systematic comparative evaluation of the sustainability of energy systems. The existing, representative evaluation criteria and indicators, recently proposed by competent international organisations, have first been reviewed. Based on this survey, and the experience gained at PSI from previous evaluation studies, a set of criteria and indicators for use in the present project have been established. Main efforts have focussed on the generation of quantitative, technology-specific, economic, environmental and social indicators. A number of methods have been employed, including Life Cycle Assessment (LCA), Risk Assessment (RA), and the Impact Pathway Approach (IPA). Some new, advanced methodologies have also been implemented, in particular an improved link between LCA and impact estimation, and an enhanced treatment of site-dependent effects. Two methods of indicator aggregation were employed: namely, the estimation of total (internal and external) costs, and Multi-Criteria Decision Analysis (MCDA). Use of MCDA is motivated principally by the acknowledgement of the role of value judgments in decision-making. In terms of total costs, nuclear power displays top performance under German conditions, superior to all other currently implemented technologies. Evaluations employing a variety of sustainability criteria result in a fragmented picture of the merits and drawbacks of the currently available electricity supply options. No single system exhibits superior performance on the basis of all criteria. MCDA ranking based on the three pillars of sustainability of economy, ecology and social, is relatively robust if the pillars are considered to be equally important, and the weighting of lower-level criteria (e.g. financial requirements or employment effects) is subject to variation. Placing emphasis on economy penalizes renewables, while emphasis on the environment penalizes fossil systems, and emphasis on

  4. Driving Simulator Based Interactive Experiments : Understanding Driver Behavior, Cognition and Technology Uptake under Information and Communication Technologies

    Science.gov (United States)

    2018-01-31

    Advanced Traveler Information Systems (ATIS) and in-vehicle information systems (IVIS) are becoming an integral part of the current driving experience. Although information through in-vehicle technologies provides assistance to drivers with diverse t...

  5. Technology-Enabled Remote Monitoring and Self-Management - Vision for Patient Empowerment Following Cardiac and Vascular Surgery: User Testing and Randomized Controlled Trial Protocol.

    Science.gov (United States)

    McGillion, Michael; Yost, Jennifer; Turner, Andrew; Bender, Duane; Scott, Ted; Carroll, Sandra; Ritvo, Paul; Peter, Elizabeth; Lamy, Andre; Furze, Gill; Krull, Kirsten; Dunlop, Valerie; Good, Amber; Dvirnik, Nazari; Bedini, Debbie; Naus, Frank; Pettit, Shirley; Henry, Shaunattonie; Probst, Christine; Mills, Joseph; Gossage, Elaine; Travale, Irene; Duquette, Janine; Taberner, Christy; Bhavnani, Sanjeev; Khan, James S; Cowan, David; Romeril, Eric; Lee, John; Colella, Tracey; Choinière, Manon; Busse, Jason; Katz, Joel; Victor, J Charles; Hoch, Jeffrey; Isaranuwatchai, Wanrudee; Kaasalainen, Sharon; Ladak, Salima; O'Keefe-McCarthy, Sheila; Parry, Monica; Sessler, Daniel I; Stacey, Michael; Stevens, Bonnie; Stremler, Robyn; Thabane, Lehana; Watt-Watson, Judy; Whitlock, Richard; MacDermid, Joy C; Leegaard, Marit; McKelvie, Robert; Hillmer, Michael; Cooper, Lynn; Arthur, Gavin; Sider, Krista; Oliver, Susan; Boyajian, Karen; Farrow, Mark; Lawton, Chris; Gamble, Darryl; Walsh, Jake; Field, Mark; LeFort, Sandra; Clyne, Wendy; Ricupero, Maria; Poole, Laurie; Russell-Wood, Karsten; Weber, Michael; McNeil, Jolene; Alpert, Robyn; Sharpe, Sarah; Bhella, Sue; Mohajer, David; Ponnambalam, Sem; Lakhani, Naeem; Khan, Rabia; Liu, Peter; Devereaux, P J

    2016-08-01

    Tens of thousands of cardiac and vascular surgeries (CaVS) are performed on seniors in Canada and the United Kingdom each year to improve survival, relieve disease symptoms, and improve health-related quality of life (HRQL). However, chronic postsurgical pain (CPSP), undetected or delayed detection of hemodynamic compromise, complications, and related poor functional status are major problems for substantial numbers of patients during the recovery process. To tackle this problem, we aim to refine and test the effectiveness of an eHealth-enabled service delivery intervention, TecHnology-Enabled remote monitoring and Self-MAnagemenT-VIsion for patient EmpoWerment following Cardiac and VasculaR surgery (THE SMArTVIEW, CoVeRed), which combines remote monitoring, education, and self-management training to optimize recovery outcomes and experience of seniors undergoing CaVS in Canada and the United Kingdom. Our objectives are to (1) refine SMArTVIEW via high-fidelity user testing and (2) examine the effectiveness of SMArTVIEW via a randomized controlled trial (RCT). CaVS patients and clinicians will engage in two cycles of focus groups and usability testing at each site; feedback will be elicited about expectations and experience of SMArTVIEW, in context. The data will be used to refine the SMArTVIEW eHealth delivery program. Upon transfer to the surgical ward (ie, post-intensive care unit [ICU]), 256 CaVS patients will be reassessed postoperatively and randomly allocated via an interactive Web randomization system to the intervention group or usual care. The SMArTVIEW intervention will run from surgical ward day 2 until 8 weeks following surgery. Outcome assessments will occur on postoperative day 30; at week 8; and at 3, 6, 9, and 12 months. The primary outcome is worst postop pain intensity upon movement in the previous 24 hours (Brief Pain Inventory-Short Form), averaged across the previous 14 days. Secondary outcomes include a composite of postoperative

  6. The Cell-CT 3D Cell Imaging Technology Platform Enables the Detection of Lung Cancer Using the Non-Invasive LuCED Sputum Test

    Science.gov (United States)

    Meyer, Michael G.; Hayenga, Jon; Neumann, Thomas; Katdare, Rahul; Presley, Chris; Steinhauer, David; Bell, Timothy; Lancaster, Christy; Nelson, Alan C.

    2015-01-01

    The war against cancer has yielded important advances in the early diagnosis and treatment of certain cancer types, but the poor detection rate and 5-year survival rate for lung cancer remains little changed over the past 40 years. Early detection through emerging lung cancer screening programs promises the most reliable means of improving mortality. Sputum cytology has been tried without success because sputum contains few malignant cells that are difficult for cytologists to detect. However, research has shown that sputum contains diagnostic malignant cells and could serve as a means of lung cancer detection if those cells could be detected and correctly characterized. Recently, the National Lung Cancer Screening Trial reported that screening by three consecutive low-dose X-ray CT scans provides a 20% reduction in lung cancer mortality compared to chest X-ray. This reduction in mortality, however, comes with an unacceptable false positive rate that increases patient risks and the overall cost of lung cancer screening. This article reviews the LuCED® test for detecting early lung cancer. LuCED is based on patient sputum that is enriched for bronchial epithelial cells. The enriched sample is then processed on the Cell-CT®, which images cells in three dimensions with sub-micron resolution. Algorithms are applied to the 3D cell images to extract morphometric features that drive a classifier to identify cells that have abnormal characteristics. The final status of these candidate abnormal cells is established by the pathologist's manual review. LuCED promotes accurate cell classification which could enable cost effective detection of lung cancer. PMID:26148817

  7. Operational challenges in conducting a community-based technology-enabled mental health services delivery model for rural India: Experiences from the SMART Mental Health Project.

    Science.gov (United States)

    Maulik, Pallab K; Kallakuri, Sudha; Devarapalli, Siddhardha

    2018-01-01

    Background: There are large gaps in the delivery of mental health care in low- and middle-income countries such as India, and the problems are even more acute in rural settings due to lack of resources, remoteness, and lack of infrastructure, amongst other factors. The Systematic Medical Appraisal Referral and Treatment (SMART) Mental Health Project was conceived as a mental health services delivery model using technology-based solutions for rural India. This paper reports on the operational strategies used to facilitate the implementation of the intervention. Method: Key components of the SMART Mental Health Project included delivering an anti-stigma campaign, training of primary health workers in screening, diagnosing and managing stress, depression and increased suicide risk and task sharing of responsibilities in delivering care; and using mobile technology based electronic decision support systems to support delivery of algorithm based care for such disorders. The intervention was conducted in 42 villages across two sites in the state of Andhra Pradesh in south India. A pre-post mixed methods evaluation was done, and in this paper operational challenges are reported. Results: Both quantitative and qualitative results from the evaluation from one site covering about 5000 adults showed that the intervention was feasible and acceptable, and initial results indicated that it was beneficial in increasing access to mental health care and reducing depression and anxiety symptoms. A number of strategies were initiated in response to operational challenges to ensure smoother conduct of the project and facilitated the project to be delivered as envisaged. Conclusions: The operational strategies initiated for this project were successful in ensuring the delivery of the intervention. Those, coupled with other more systematic processes have informed the researchers to understand key processes that need to be in place to develop a more robust study, that could eventually be

  8. 5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

    Science.gov (United States)

    2010-01-01

    ... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... CONFLICT OF INTEREST RESTRICTIONS Prohibitions § 2641.207 One-year restriction on any former private sector... one year after the termination of his assignment from a private sector organization to an agency under...

  9. 48 CFR 27.204-1 - Use of patented technology under the North American Free Trade Agreement.

    Science.gov (United States)

    2010-10-01

    ... under the North American Free Trade Agreement. 27.204-1 Section 27.204-1 Federal Acquisition Regulations... Patents and Copyrights 27.204-1 Use of patented technology under the North American Free Trade Agreement... the patent holder is from a country that is a party to the North American Free Trade Agreement (NAFTA...

  10. Enhancement of Orthodontic Anchor Screw Stability Under Immediate Loading by Ultraviolet Photofunctionalization Technology.

    Science.gov (United States)

    Takahashi, Maiko; Motoyoshi, Mitsuru; Inaba, Mizuki; Hagiwara, Yoshiyuki; Shimizu, Noriyoshi

    Ultraviolet (UV)-mediated photofunctionalization technology is intended to enhance the osseointegration capability of titanium implants. There are concerns about orthodontic anchor screws loosening under immediate loading protocols in adolescent orthodontic treatment. The purpose of this in vivo study was to evaluate the effects of photofunctionalization on the intrabony stability of orthodontic titanium anchor screws and bone-anchor screw contact under immediate loading in growing rats. Custom-made titanium anchor screws (1.4 mm in diameter and 4.0 mm in length) with or without photofunctionalization pretreatment were placed on the proximal epiphysis of the tibial bone in 6-week-old male Sprague-Dawley rats and were loaded immediately after placement. After 2 weeks of loading, the stability of the anchor screws was evaluated using a Periotest device, and the bone-anchor screw contact ratio (BSC) was assessed by a histomorphometric analysis using field-emission scanning electron microscopy. In the unloaded group, Periotest values (PTVs) were ~25 for UV-untreated screws and 13 for UVtreated screws (P < .01), while in the immediate-loading group, PTVs were 28 for UV-untreated screws and 16 for UV-treated screws (P < .05). Significantly less screw mobility was observed in both UV-treated groups regardless of the loading protocol. The BSC was increased ~1.8 fold for UV-treated screws, compared with UV-untreated screws, regardless of the loading protocol. Photofunctionalization enhanced the intrabony stability of orthodontic anchor screws under immediate loading in growing rats by increasing bone-anchor screw contact.

  11. Enabling Global Observations of Clouds and Precipitation on Fine Spatio-Temporal Scales from CubeSat Constellations: Temporal Experiment for Storms and Tropical Systems Technology Demonstration (TEMPEST-D)

    Science.gov (United States)

    Reising, S. C.; Todd, G.; Padmanabhan, S.; Lim, B.; Heneghan, C.; Kummerow, C.; Chandra, C. V.; Berg, W. K.; Brown, S. T.; Pallas, M.; Radhakrishnan, C.

    2017-12-01

    The Temporal Experiment for Storms and Tropical Systems (TEMPEST) mission concept consists of a constellation of 5 identical 6U-Class satellites observing storms at 5 millimeter-wave frequencies with 5-10 minute temporal sampling to observe the time evolution of clouds and their transition to precipitation. Such a small satellite mission would enable the first global measurements of clouds and precipitation on the time scale of tens of minutes and the corresponding spatial scale of a few km. TEMPEST is designed to improve the understanding of cloud processes by providing critical information on temporal signatures of precipitation and helping to constrain one of the largest sources of uncertainty in cloud models. TEMPEST millimeter-wave radiometers are able to perform remote observations of the cloud interior to observe microphysical changes as the cloud begins to precipitate or ice accumulates inside the storm. The TEMPEST technology demonstration (TEMPEST-D) mission is in progress to raise the TRL of the instrument and spacecraft systems from 6 to 9 as well as to demonstrate radiometer measurement and differential drag capabilities required to deploy a constellation of 6U-Class satellites in a single orbital plane. The TEMPEST-D millimeter-wave radiometer instrument provides observations at 89, 165, 176, 180 and 182 GHz using a single compact instrument designed for 6U-Class satellites. The direct-detection topology of the radiometer receiver substantially reduces both its power consumption and design complexity compared to heterodyne receivers. The TEMPEST-D instrument performs precise, end-to-end calibration using a cross-track scanning reflector to view an ambient blackbody calibration target and cosmic microwave background every scan period. The TEMPEST-D radiometer instrument has been fabricated and successfully tested under environmental conditions (vibration, thermal cycling and vacuum) expected in low-Earth orbit. TEMPEST-D began in Aug. 2015, with a

  12. Grid-Enabled Measures

    Science.gov (United States)

    Moser, Richard P.; Hesse, Bradford W.; Shaikh, Abdul R.; Courtney, Paul; Morgan, Glen; Augustson, Erik; Kobrin, Sarah; Levin, Kerry; Helba, Cynthia; Garner, David; Dunn, Marsha; Coa, Kisha

    2011-01-01

    Scientists are taking advantage of the Internet and collaborative web technology to accelerate discovery in a massively connected, participative environment —a phenomenon referred to by some as Science 2.0. As a new way of doing science, this phenomenon has the potential to push science forward in a more efficient manner than was previously possible. The Grid-Enabled Measures (GEM) database has been conceptualized as an instantiation of Science 2.0 principles by the National Cancer Institute with two overarching goals: (1) Promote the use of standardized measures, which are tied to theoretically based constructs; and (2) Facilitate the ability to share harmonized data resulting from the use of standardized measures. This is done by creating an online venue connected to the Cancer Biomedical Informatics Grid (caBIG®) where a virtual community of researchers can collaborate together and come to consensus on measures by rating, commenting and viewing meta-data about the measures and associated constructs. This paper will describe the web 2.0 principles on which the GEM database is based, describe its functionality, and discuss some of the important issues involved with creating the GEM database, such as the role of mutually agreed-on ontologies (i.e., knowledge categories and the relationships among these categories— for data sharing). PMID:21521586

  13. Enabling immersive simulation.

    Energy Technology Data Exchange (ETDEWEB)

    McCoy, Josh (University of California Santa Cruz, Santa Cruz, CA); Mateas, Michael (University of California Santa Cruz, Santa Cruz, CA); Hart, Derek H.; Whetzel, Jonathan; Basilico, Justin Derrick; Glickman, Matthew R.; Abbott, Robert G.

    2009-02-01

    The object of the 'Enabling Immersive Simulation for Complex Systems Analysis and Training' LDRD has been to research, design, and engineer a capability to develop simulations which (1) provide a rich, immersive interface for participation by real humans (exploiting existing high-performance game-engine technology wherever possible), and (2) can leverage Sandia's substantial investment in high-fidelity physical and cognitive models implemented in the Umbra simulation framework. We report here on these efforts. First, we describe the integration of Sandia's Umbra modular simulation framework with the open-source Delta3D game engine. Next, we report on Umbra's integration with Sandia's Cognitive Foundry, specifically to provide for learning behaviors for 'virtual teammates' directly from observed human behavior. Finally, we describe the integration of Delta3D with the ABL behavior engine, and report on research into establishing the theoretical framework that will be required to make use of tools like ABL to scale up to increasingly rich and realistic virtual characters.

  14. INCREASING ACHIEVEMENT AND HIGHER-EDUCATION REPRESENTATION OF UNDER-REPRESENTED GROUPS IN SCIENCE, TECHNOLOGY, ENGINEERING, AND MATHEMATICS FIELDS: A REVIEW OF CURRENT K-12 INTERVENTION PROGRAMS.

    Science.gov (United States)

    Valla, Jeffrey M; Williams, Wendy M

    2012-01-01

    The under-representation of women and ethnic minorities in Science, Technology, Engineering, and Mathematics (STEM) education and professions has resulted in a loss of human capital for the US scientific workforce and spurred the development of myriad STEM educational intervention programs. Increased allocation of resources to such programs begs for a critical, prescriptive, evidence-based review that will enable researchers to develop optimal interventions and administrators to maximize investments. We begin by providing a theoretical backdrop for K-12 STEM programs by reviewing current data on under-representation and developmental research describing individual-level social factors undergirding these data. Next, we review prototypical designs of these programs, highlighting specific programs in the literature as examples of program structures and components currently in use. We then evaluate these interventions in terms of overall effectiveness, as a function of how well they address age-, ethnicity-, or gender-specific factors, suggesting improvements in program design based on these critiques. Finally, program evaluation methods are briefly reviewed and discussed in terms of how their empirical soundness can either enable or limit our ability to delineate effective program components. "Now more than ever, the nation's changing demographics demand that we include all of our citizens in science and engineering education and careers. For the U.S. to benefit from the diverse talents of all its citizens, we must grow the pipeline of qualified, underrepresented minority engineers and scientists to fill positions in industry and academia."-Irving P. McPhail..

  15. Energy trading market evolution to the energy internet a feasibility review on the enabling internet of things (IoT) cloud technologies

    Science.gov (United States)

    Agavanakis, Kyriakos; Papageorgas, Panagiotis G.; Vokas, Georgios A.; Ampatis, Dionysios; Salame, Chafic

    2018-05-01

    Energy trading market is a consequence of the grid evolution, which has been highly regulated and accessible to a small group of stakeholders so far. Being a fundamental part of national economies, the business models and the operating regulatory structures have been the subject of intense research and experimentation. At the same time, the increasing integration of distributed energy resources to the microgrid level changes the dependence of the grid infrastructure from fossil and nuclear to renewable energy sources, smart storage and smart management. In this paper, it is argued that this shift which marks the transformation towards the next industrial era, puts in the market foreground a big number of smaller producers and ultimately all the end users, in the form of actively engaged prosumers. Furthermore, it is shown that the computational resources and technology to support an open, widely accessible and fair peer-to-peer trading market, are already available. And that such an implementation is feasible and immediately achievable using just commercial products and a side-by-side approach in the place of unrealistic big-bang type grid upgrades.

  16. The Combinational Use of CRISPR/Cas9 and Targeted Toxin Technology Enables Efficient Isolation of Bi-Allelic Knockout Non-Human Mammalian Clones

    Directory of Open Access Journals (Sweden)

    Satoshi Watanabe

    2018-04-01

    targeted to be knocked out. Our results indicate that a combination of the CRISPR/Cas9 system and targeted toxin technology using IB4SAP allows efficient enrichment of genome-edited clones, particularly bi-allelic KO clones.

  17. Archiving Data from New Survey Technologies: Lessons Learned on Enabling Research with High-Precision Data While Preserving Participant Privacy: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Gonder, J.; Burton, E.; Murakami, E.

    2014-11-01

    During the past 15 years, increasing numbers of organizations and planning agencies have begun collecting high-resolution Global Positioning System (GPS) travel data. Despite the significant effort and expense to collect it, privacy concerns often lead to underutilization of the data. To address this dilemma of providing data access while preserving privacy, the National Renewable Energy Laboratory, with support from the U.S. Department of Transportation and U.S. Department of Energy, established the Transportation Secure Data Center (TSDC). Lessons drawn from best-practice examples from other data centers have helped shape the structure and operating procedures for the TSDC, which functions under the philosophy of first and foremost preserving privacy, but doing so in a way that balances security with accessibility and usability of the data for legitimate research. This paper provides details about the TSDC approach toward achieving these goals, which has included creating a secure enclave with no external access for backing up and processing raw data, a publicly accessible website for downloading cleansed data, and a secure portal environment through which approved users can work with detailed spatial data using a variety of tools and reference information. This paper also describes lessons learned from operating the TSDC with respect to improvements in GPS data handling, processing, and user support, along with plans for continual enhancements to better support the needs of both data providers and users and to thus advance the research value derived from such valuable data.

  18. Leadership Under Challenge: Information Technology R and D in a Competitive World

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The United States is today the global leader in networking and information technology NIT. That leadership is essential to U.S. economic prosperity, security, and...

  19. Smart Grid enabled heat pumps

    DEFF Research Database (Denmark)

    Carmo, Carolina; Detlefsen, Nina; Nielsen, Mads Pagh

    2014-01-01

    The transition towards a 100 % fossil-free energy system, while achieving extreme penetration levels of intermittent wind and solar power in electricity generation, requires demand-side technologies that are smart (intermittency-friendly) and efficient. The integration of Smart Grid enabling...... with an empirical study in order to achieve a number of recommendations with respect to technology concepts and control strategies that would allow residential vapor-compression heat pumps to support large-scale integration of intermittent renewables. The analysis is based on data gathered over a period of up to 3...

  20. Investigating Degradation Mechanisms in 130 nm and 90 nm Commercial CMOS Technologies Under Extreme Radiation Conditions

    Science.gov (United States)

    Ratti, Lodovico; Gaioni, Luigi; Manghisoni, Massimo; Traversi, Gianluca; Pantano, Devis

    2008-08-01

    The purpose of this paper is to study the mechanisms underlying performance degradation in 130 nm and 90 nm commercial CMOS technologies exposed to high doses of ionizing radiation. The investigation has been mainly focused on their noise properties in view of applications to the design of low-noise, low-power analog circuits to be operated in harsh environment. Experimental data support the hypothesis that charge trapping in shallow trench isolation (STI), besides degrading the static characteristics of interdigitated NMOS transistors, also affects their noise performances in a substantial fashion. The model discussed in this paper, presented in a previous work focused on CMOS devices irradiated with a 10 Mrad(SiO2) gamma -ray dose, has been applied here also to transistors exposed to much higher (up to 100 Mrad(SiO2 )) doses of X-rays. Such a model is able to account for the extent of the observed noise degradation as a function of the device polarity, dimensions and operating point.

  1. What can They do When we Give Them the Chance? Assessing the Impact of Data- Immersive Technology-Enabled Inquiry Projects on High School Students' Understanding of Geoscience

    Science.gov (United States)

    Zalles, D.; Quellmalz, E.; Gobert, J.; Pallant, A.

    2006-12-01

    The report "Bringing Research on Learning to the Geosciences" (Manduca, Mogk, & Stillings, 2002) proposed a new program of research to invigorate and expand geoscience education. The report recommended integrating best practices in learning science with the distinctive challenges posed by using geoscience data sets and visualizations in inquiry activities (e.g., working with geologic time-referenced concepts, observing complex natural systems, using integrative and synthetic approaches). Geoscience educators are challenged with how to take advantage of publicly available data and visualization technology to build in their students deeper understanding of key Earth system phenomena and, at the same time, greater ability to identify and generate appropriate inquiry strategies. Their challenge is made greater by the fact that the ways in which geoscientists design research studies and represent, interpret, and analyze data vary widely with the disparate Earth system phenomena they study. Data for example, that permit analysis of the relationships between plate boundaries and earthquakes have quite different representational requirements than weather data that support analyses of climate change. The data's spatial and temporal characteristics are also critical determinants of representational requirements. How can students be led to appreciate what is knowable and not knowable by specific data sets, and how can they become better at taking the best possible advantages of whatever data are available to them as they formulate research questions and confront authentic problems? These are the questions we are addressing in our NSF-funded project, Data Sets and Inquiry in Geoscience Education. We are investigating what greater understandings of epistemically-appropriate geoscientifc inquiry high school students are capable of demonstrating when provided with the opportunity. To do this, we are designing and testing data-immersive project-based units that supplement existing

  2. Prospects of Russian Agriculture development under global climate and technological changes

    Science.gov (United States)

    Valentini, Riccardo; Vasenev, Ivan

    2015-04-01

    crop yields (about 20% in a decade, IPCC 2014), some regions in the world, particularly boreal ones, will benefit from temperature warming due to an increasing of growing season length and mild climate conditions. Several crops not usually suited for growing in northern latitude region will find here favorable conditions and potentially new economic opportunities will rise. Under new climate scenarios we discuss the potential for Russia to expand its agro-food sector and becoming a new important player of future global food supply. We analyze regional climate scenarios at high spatial resolution (8km) and project in the current century the new distribution of agro-ecological zones with the implication of new crops expansion. We also discuss limitation of water supply which may derive from increased evapotranspiration and water demands for irrigation. A final discussion is about the technological challenges and transformation needed in the Russian agricultural sector to take this opportunity. The question is about available technologies, barriers to implement innovation, financial instruments to prevent climate risks and moreover the required agriculture transformation to prevent environmental impacts of agriculture intensification.

  3. FOILFEST :community enabled security.

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Judy Hennessey; Johnson, Curtis Martin; Whitley, John B.; Drayer, Darryl Donald; Cummings, John C., Jr. (.,; .)

    2005-09-01

    The Advanced Concepts Group of Sandia National Laboratories hosted a workshop, ''FOILFest: Community Enabled Security'', on July 18-21, 2005, in Albuquerque, NM. This was a far-reaching look into the future of physical protection consisting of a series of structured brainstorming sessions focused on preventing and foiling attacks on public places and soft targets such as airports, shopping malls, hotels, and public events. These facilities are difficult to protect using traditional security devices since they could easily be pushed out of business through the addition of arduous and expensive security measures. The idea behind this Fest was to explore how the public, which is vital to the function of these institutions, can be leveraged as part of a physical protection system. The workshop considered procedures, space design, and approaches for building community through technology. The workshop explored ways to make the ''good guys'' in public places feel safe and be vigilant while making potential perpetrators of harm feel exposed and convinced that they will not succeed. Participants in the Fest included operators of public places, social scientists, technology experts, representatives of government agencies including DHS and the intelligence community, writers and media experts. Many innovative ideas were explored during the fest with most of the time spent on airports, including consideration of the local airport, the Albuquerque Sunport. Some provocative ideas included: (1) sniffers installed in passage areas like revolving door, escalators, (2) a ''jumbotron'' showing current camera shots in the public space, (3) transparent portal screeners allowing viewing of the screening, (4) a layered open/funnel/open/funnel design where open spaces are used to encourage a sense of ''communitas'' and take advantage of citizen ''sensing'' and funnels are technological

  4. Designing an agricultural vegetative waste-management system under uncertain prices of treatment-technology output products.

    Science.gov (United States)

    Broitman, D; Raviv, O; Ayalon, O; Kan, I

    2018-05-01

    Setting up a sustainable agricultural vegetative waste-management system is a challenging investment task, particularly when markets for output products of waste-treatment technologies are not well established. We conduct an economic analysis of possible investments in treatment technologies of agricultural vegetative waste, while accounting for fluctuating output prices. Under a risk-neutral approach, we find the range of output-product prices within which each considered technology becomes most profitable, using average final prices as the exclusive factor. Under a risk-averse perspective, we rank the treatment technologies based on their computed certainty-equivalent profits as functions of the coefficient of variation of the technologies' output prices. We find the ranking of treatment technologies based on average prices to be robust to output-price fluctuations provided that the coefficient of variation of the output prices is below about 0.4, that is, approximately twice as high as that of well-established recycled-material markets such as glass, paper and plastic. We discuss some policy implications that arise from our analysis regarding vegetative waste management and its associated risks. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Returns on investments in energy-saving technologies under energy price uncertainty in Dutch greenhouse horticulture

    NARCIS (Netherlands)

    Diederen, P.J.M.; Tongeren, van F.W.; Veen, van der H.B.

    2003-01-01

    Conventional net present value calculations evaluating the profitability of investments in energy-saving technologies in Dutch horticultural outlays predict a much higher rate of adoption of these technologies than is actually observed. This paper tries to explain this gap by applying a real options

  6. Enabling technologies for the prassi autonomous robot

    Energy Technology Data Exchange (ETDEWEB)

    Taraglio, S.; Nanni, V. [ENEA, Robotics and Information Technology Division, Rome (Italy)

    2001-07-01

    In this book are summarised some of the results of the PRASSI project as presented by the different partners of the effort. PRASSI is an acronym which stands for Autonomous Robotic Platform for the Security and Surveillance of plants, the Italian for it is 'Piattaforma Robotica per la Sorveglianza e Sicurezza d'Impianto'. This project has been funded by the Italian Ministry for the Education, the University and the Research (MIUR) in the framework of the project High Performance Computing Applied to Robotics (Calcolo Parallelo con Applicazioni alla Robotica) of the law 95/1995. The idea behind such an initiative is that of fostering the knowledge and possibly the use of high performance computing in the research and industrial community. In other words, robotic scientists are always simplifying their algorithms or using particular approaches (e.g. soft computing) in order to use standard processors for difficult sensorial data processing; well, what if an embedded parallel computer were available, with at least one magnitude more of computing power?.

  7. Enabling Fast Charging: A Technology Gap Assessment

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-10-31

    Decreasing energy consumption across the U.S. transportation sector, especially in commercial light-duty vehicles, is essential for the United States to gain energy independence. Recently, powertrain electrification with plug-in electric vehicles (PEVs) have gained traction as an alternative due to their inherent efficiency advantages compared to the traditional internal combustion engine vehicle (ICEV). Even though there are many different classes of PEVs, the intent of this study is to focus on non-hybrid powertrains, or battery electric vehicles (BEVs).

  8. Enabling technologies for the prassi autonomous robot

    Energy Technology Data Exchange (ETDEWEB)

    Taraglio, S; Nanni, V [ENEA, Robotics and Information Technology Division, Rome (Italy)

    2001-07-01

    In this book are summarised some of the results of the PRASSI project as presented by the different partners of the effort. PRASSI is an acronym which stands for Autonomous Robotic Platform for the Security and Surveillance of plants, the Italian for it is 'Piattaforma Robotica per la Sorveglianza e Sicurezza d'Impianto'. This project has been funded by the Italian Ministry for the Education, the University and the Research (MIUR) in the framework of the project High Performance Computing Applied to Robotics (Calcolo Parallelo con Applicazioni alla Robotica) of the law 95/1995. The idea behind such an initiative is that of fostering the knowledge and possibly the use of high performance computing in the research and industrial community. In other words, robotic scientists are always simplifying their algorithms or using particular approaches (e.g. soft computing) in order to use standard processors for difficult sensorial data processing; well, what if an embedded parallel computer were available, with at least one magnitude more of computing power?.

  9. Essays on Technology-Enabled Platforms

    Science.gov (United States)

    Koh, Tat Koon

    2012-01-01

    This dissertation consists of three studies that examine dynamics on Business-to-Business (B2B) exchanges and crowd-based design contest platforms. In the first study, we examine trust formation and development in global buyer-supplier relationships. Trust affects all business relationships, especially global B2B transactions due to the distances…

  10. Aging System Sustainment and Enabling Technologies (ASSET)

    Science.gov (United States)

    2014-03-31

    Description Bolt , Machine AMC/AMSC Fab Prototypes COMPLbTb Type Alternate Offer Awardee Fairchild Controls First Article Inspection COMPLhlh City...Fredrick State MD Lab Comparison Analysis ASSET PO Issued $16,488 SAR COMPLETE CO NSN 5307-01-185-3077 RE/TDP COMPLblb Description Stud , Self...Project Elements Project Status m CO NSN 5307-01-185-3077 RE/TDP COMPLETE Description Stud , Self Locking AMC/AMSC 3/P Fab Prototypes

  11. 2018 Cyber Enabled Emerging Technologies Symposium

    Science.gov (United States)

    2018-03-08

    Principles • Better data = better outcomes • Training > Programming • AI anxiety?... Think IA (Intelligent Assistant) • Ingest much more information • Make...Local Marketing 7 Usage: “Local” / Specific AI • Healthcare (oncology) • Data Mining/Discovery • Chat bots • Personnel • Finance • Sourcing...cognitive- principles / So, Our Priorities for AI Adoption and Ethics • Purpose: human augmentation versus replacement • Human decision-making • Human

  12. Enabling Technologies for Cognitive Optical Networks

    DEFF Research Database (Denmark)

    Borkowski, Robert

    Cognition is a new paradigm for optical networking, in which the network has capabilities to observe, plan, decide, and act autonomously in order to optimize the end-to-end performance and minimize the need for human supervision. This PhD thesis expands the state of the art on cognitive optical......, and machine learning algorithms that make cognition possible. Secondly, advanced optical performance monitoring (OPM) capabilities performed via digital signal processing (DSP) that provide CONs with necessary feedback information allowing for autonomous network optimization. The research results presented...... in this thesis were carried out in the framework of the EU project Cognitive Heterogeneous Reconfigurable Optical Network (CHRON), whose aim was to develop an architecture and implement a testbed of a cognitive network able to self-configure and self-optimize to efficiently use available resources. In order...

  13. Privacy enabling technology for video surveillance

    Science.gov (United States)

    Dufaux, Frédéric; Ouaret, Mourad; Abdeljaoued, Yousri; Navarro, Alfonso; Vergnenègre, Fabrice; Ebrahimi, Touradj

    2006-05-01

    In this paper, we address the problem privacy in video surveillance. We propose an efficient solution based on transformdomain scrambling of regions of interest in a video sequence. More specifically, the sign of selected transform coefficients is flipped during encoding. We address more specifically the case of Motion JPEG 2000. Simulation results show that the technique can be successfully applied to conceal information in regions of interest in the scene while providing with a good level of security. Furthermore, the scrambling is flexible and allows adjusting the amount of distortion introduced. This is achieved with a small impact on coding performance and negligible computational complexity increase. In the proposed video surveillance system, heterogeneous clients can remotely access the system through the Internet or 2G/3G mobile phone network. Thanks to the inherently scalable Motion JPEG 2000 codestream, the server is able to adapt the resolution and bandwidth of the delivered video depending on the usage environment of the client.

  14. Enabling Technologies for Medium Additive Manufacturing (MAAM)

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, Bradley S. [ORNL; Love, Lonnie J. [ORNL; Chesser, Phillip C. [ORNL; Miller, Jason [Cosine Additive, Inc.; McCalip, Andrew [Cosine Additive, Inc.

    2018-02-01

    ORNL has worked with Cosine Additive, Inc. on the design of MAAM extrusion components. The objective is to improve the print speed and part quality. A pellet extruder has been procured and integrated into the MAAM printer. Print speed has been greatly enhanced. In addition, ORNL and Cosine Additive have worked on alternative designs for a pellet drying and feed system.

  15. RECOVERY ACT - Methods for Decision under Technological Change Uncertainty and Risk Assessment for Integrated Assessment of Climate Change

    Energy Technology Data Exchange (ETDEWEB)

    Webster, Mort D. [Pennsylvania State Univ., University Park, PA (United States). Dept. of Energy and Mineral Engineering

    2015-11-30

    This report presents the final outcomes and products of the project as performed both at the Massachusetts Institute of Technology and subsequently at Pennsylvania State University. The research project can be divided into three main components: methodology development for decision-making under uncertainty, improving the resolution of the electricity sector to improve integrated assessment, and application of these methods to integrated assessment.

  16. RECOVERY ACT - Methods for Decision under Technological Change Uncertainty and Risk Assessment for Integrated Assessment of Climate Change

    Energy Technology Data Exchange (ETDEWEB)

    Webster, Mort David [MIT

    2015-03-10

    This report presents the final outcomes and products of the project as performed at the Massachusetts Institute of Technology. The research project consists of three main components: methodology development for decision-making under uncertainty, improving the resolution of the electricity sector to improve integrated assessment, and application of these methods to integrated assessment. Results in each area is described in the report.

  17. Organising to Enable Innovation

    DEFF Research Database (Denmark)

    Brink, Tove

    2016-01-01

    The purpose of this conceptual paper is to reveal how organising can enable innovation across organisational layers and organisational units. This approach calls for a cross-disciplinary literature review. The aim is to provide an integrated understanding of innovation in an organisational approach....... The findings reveal a continous organising process between individual/ team creativity and organisational structures/control to enable innovation at firm level. Organising provides a dynamic approach and contains the integrated reconstruction of creativity, structures and boundaries for enhanced balance...... of explorative and exploitative learning in uncertain environments. Shedding light on the cross-disciplinary theories to organise innovation provides a contribution at the firm level to enable innovation....

  18. Grid Enabled Geospatial Catalogue Web Service

    Science.gov (United States)

    Chen, Ai-Jun; Di, Li-Ping; Wei, Ya-Xing; Liu, Yang; Bui, Yu-Qi; Hu, Chau-Min; Mehrotra, Piyush

    2004-01-01

    Geospatial Catalogue Web Service is a vital service for sharing and interoperating volumes of distributed heterogeneous geospatial resources, such as data, services, applications, and their replicas over the web. Based on the Grid technology and the Open Geospatial Consortium (0GC) s Catalogue Service - Web Information Model, this paper proposes a new information model for Geospatial Catalogue Web Service, named as GCWS which can securely provides Grid-based publishing, managing and querying geospatial data and services, and the transparent access to the replica data and related services under the Grid environment. This information model integrates the information model of the Grid Replica Location Service (RLS)/Monitoring & Discovery Service (MDS) with the information model of OGC Catalogue Service (CSW), and refers to the geospatial data metadata standards from IS0 19115, FGDC and NASA EOS Core System and service metadata standards from IS0 191 19 to extend itself for expressing geospatial resources. Using GCWS, any valid geospatial user, who belongs to an authorized Virtual Organization (VO), can securely publish and manage geospatial resources, especially query on-demand data in the virtual community and get back it through the data-related services which provide functions such as subsetting, reformatting, reprojection etc. This work facilitates the geospatial resources sharing and interoperating under the Grid environment, and implements geospatial resources Grid enabled and Grid technologies geospatial enabled. It 2!so makes researcher to focus on science, 2nd not cn issues with computing ability, data locztic, processir,g and management. GCWS also is a key component for workflow-based virtual geospatial data producing.

  19. Simulating future wheat yield under climate change, carbon dioxide enrichment and technology improvement in Iran. Case study: Azarbaijan region

    Energy Technology Data Exchange (ETDEWEB)

    Mansouri, H.; Raei, Y.; Zaeim, A.N.

    2015-07-01

    Climate change and technology development can affect crop productivity in future conditions. Precise estimation of crops yield change as affected by climate and technology in the future is an effective approach for management strategies. The aim of this study was to estimate the impacts of climate change, technology improvement, CO2 enrichment, and overall impacts on wheat yield under future conditions. Wheat yield was projected for three future time periods (2020, 2050 and 2080) compared to baseline year (2011) under two scenarios of IPCC Special Report on Emission Scenarios (SRES) including SRES-A2 as regional economic scenario and SRES-B1 as global environmental scenario in Azarbaijan region (NW of Iran). A linear regression model, describing the relationship between wheat yield and historical year, was developed to investigate technology development effect. The decision support system for agro-technology transfer (DSSAT4.5) was used to evaluate the influence of climate change on wheat yield. The most positive effects were found for wheat yield as affected by technology in all studied regions. Under future climate change, the SRES projected a decrease in yield, especially in West Azarbaijan region. When the effects of elevated CO2 were considered, all regions resulted to increase in wheat yield. Considering all components effect in comparison with baseline (2011), yield increase would range from 5% to 38% across all times, scenarios and regions. According to our findings, it seems that we may expect a higher yield of wheat in NW Iran in the future if technology development continues as well as past years. (Author)

  20. New power generation technology options under the greenhouse gases mitigation scenario in China

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Qiang [Graduate University of Chinese Academy of Science, 19A Yu Quan Road, Beijing 100049 (China); Energy Research Institute, Guohong Mansion, Xicheng District, Beijing 100038 (China); Shi, Minjun [Graduate University of Chinese Academy of Science, 19A Yu Quan Road, Beijing 100049 (China); Jiang, Kejun [Energy Research Institute, Guohong Mansion, Xicheng District, Beijing 100038 (China)

    2009-06-15

    Climate change has become a global issue. Almost all countries, including China, are now considering adopting policies and measures to reduce greenhouse gas (GHG) emissions. The power generation sector, as a key source of GHG emissions, will also have significant potential for GHG mitigation. One of the key options is to use new energy technologies with higher energy efficiencies and lower carbon emissions. In this article, we use an energy technology model, MESSAGE-China, to analyze the trend of key new power generation technologies and their contributions to GHG mitigation in China. We expect that the traditional renewable technologies, high-efficiency coal power generation and nuclear power will contribute substantially to GHG mitigation in the short term, and that solar power, biomass energy and carbon capture and storage (CCS) will become more important in the middle and long term. In the meantime, in order to fully bring the role of technology progress into play, China needs to enhance the transfer and absorption of international advanced technologies and independently strengthen her ability in research, demonstration and application of new power generation technologies. (author)

  1. New power generation technology options under the greenhouse gases mitigation scenario in China

    Energy Technology Data Exchange (ETDEWEB)

    Qiang, Liu [Graduate University of Chinese Academy of Science, 19A Yu Quan Road, Beijing 100049 (China); Energy Research Institute, Guohong Mansion, Xicheng District, Beijing 100038 (China)], E-mail: liuqiang@eri.org.cn; Minjun, Shi [Graduate University of Chinese Academy of Science, 19A Yu Quan Road, Beijing 100049 (China); Kejun, Jiang [Energy Research Institute, Guohong Mansion, Xicheng District, Beijing 100038 (China)

    2009-06-15

    Climate change has become a global issue. Almost all countries, including China, are now considering adopting policies and measures to reduce greenhouse gas (GHG) emissions. The power generation sector, as a key source of GHG emissions, will also have significant potential for GHG mitigation. One of the key options is to use new energy technologies with higher energy efficiencies and lower carbon emissions. In this article, we use an energy technology model, MESSAGE-China, to analyze the trend of key new power generation technologies and their contributions to GHG mitigation in China. We expect that the traditional renewable technologies, high-efficiency coal power generation and nuclear power will contribute substantially to GHG mitigation in the short term, and that solar power, biomass energy and carbon capture and storage (CCS) will become more important in the middle and long term. In the meantime, in order to fully bring the role of technology progress into play, China needs to enhance the transfer and absorption of international advanced technologies and independently strengthen her ability in research, demonstration and application of new power generation technologies.

  2. Some advances in fracture studies under the heavy-section steel technology program

    International Nuclear Information System (INIS)

    Pugh, C.E.; Corwin, W.R.; Bryan, R.H.; Bass, B.R.

    1985-01-01

    Recent results are summarized from HSST studies in three major areas that relate to assessing nuclear reactor pressure vessel integrity under pressurized-thermal-shock (PTS) conditions: irradiation effects on the fracture properties of stainless steel cladding, crack run-arrest behavior under nonisothermal conditions, and fracture behavior of a thick-wall vessel under combined thermal and pressure loadings

  3. EXPERIENCE GROWING A FRY WALLEYE (STIZOSTEDION LUCIOPERCA UNDER DIFFERENT PRODUCTION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    V. Martsenuk

    2014-09-01

    Full Text Available Purpose. The question of growing and cultivation technology a fry walleye (Stizostedion Sander lucioperca, in various conditions of intensification and cultivation of the objects on the example of Ukraine, Poland and Czech Republic. Methodology. Some of the research conducted in JSC "Lebedynska RMS." There was a corresponding work of herd sires and fry. Also used published articles and monographs using statistical analysis methods. Findings. The existing technology of breeding and raising perch as in natural waters and artificial reproduction. Also, this is a clear description of the biology walleye in the early stages postembryogenesis perch. Also highlighted key points in the technology of the object at different aquaculture technologies. Originality. On the basis of existing technologies were analyzed current methods for growing and perch are to be brought in fish farms Ukraine, depending on the technical capabilities of enterprises. Practical value. Comparative review of technology growing perch allows farmers to introduce more appropriate technology of walleye for your own needs. Since it is directly a particular manufacturer planting material of the object is necessary to choose the most suitable and perfect technology, based on the existing herd sires, space, equipment and ability to use hormonal stimulation. So can use the following methods of breeding walleye: natural spawning, uncontrolled; controlled natural spawning; spawning in lake; artificial spawning; spawning outside-seasonal. During the early stages of walleye can identify a number of critical periods greatly affect the possibility of wound development: small body size at the final stage of resorption of yolk sac; small size of the cavity; feed intake in the water column; high sensitivity to stress; belonging to the group of fish with a closed bladder; great demands on environmental conditions; relative preferences heat; penchant for cannibalism.

  4. Application of Multimodality Imaging Fusion Technology in Diagnosis and Treatment of Malignant Tumors under the Precision Medicine Plan.

    Science.gov (United States)

    Wang, Shun-Yi; Chen, Xian-Xia; Li, Yi; Zhang, Yu-Ying

    2016-12-20

    The arrival of precision medicine plan brings new opportunities and challenges for patients undergoing precision diagnosis and treatment of malignant tumors. With the development of medical imaging, information on different modality imaging can be integrated and comprehensively analyzed by imaging fusion system. This review aimed to update the application of multimodality imaging fusion technology in the precise diagnosis and treatment of malignant tumors under the precision medicine plan. We introduced several multimodality imaging fusion technologies and their application to the diagnosis and treatment of malignant tumors in clinical practice. The data cited in this review were obtained mainly from the PubMed database from 1996 to 2016, using the keywords of "precision medicine", "fusion imaging", "multimodality", and "tumor diagnosis and treatment". Original articles, clinical practice, reviews, and other relevant literatures published in English were reviewed. Papers focusing on precision medicine, fusion imaging, multimodality, and tumor diagnosis and treatment were selected. Duplicated papers were excluded. Multimodality imaging fusion technology plays an important role in tumor diagnosis and treatment under the precision medicine plan, such as accurate location, qualitative diagnosis, tumor staging, treatment plan design, and real-time intraoperative monitoring. Multimodality imaging fusion systems could provide more imaging information of tumors from different dimensions and angles, thereby offing strong technical support for the implementation of precision oncology. Under the precision medicine plan, personalized treatment of tumors is a distinct possibility. We believe that multimodality imaging fusion technology will find an increasingly wide application in clinical practice.

  5. Electricity to natural gas competition under customer-side technological change: a marginal cost pricing analysis

    International Nuclear Information System (INIS)

    Gulli', Francesco

    2004-01-01

    This paper aims at evaluating the impact of technological change (on the customer side of the meter) on the network energy industry (electricity and natural gas). The performances of the small gas fired power technologies and the electrical reversible heat pumps have improved remarkably over the last ten years, making possible (or more viable) two opposite technological trajectories: the fully gas-based system, based on the use of small CHP (combined heat and power generation) plants, which would involve a wide decentralisation of energy supply; the fully electric-based system, based on the use of reversible electric heat pumps, which would imply increasing centralisation of energy supply. The analysis described in this paper attempts to evaluate how these two kinds of technological solutions can impact on inter-service competition when input prices are ste equals to marginal costs of supply in each stage of the electricity and natural gas industries. For this purpose, unbundled prices over time and over space are simulated. In particular the paper shows that unbundling prices over space in not very important in affecting electricity to natural gas competition and that, when prices are set equal to long-run marginal costs, the fully electric-based solution (the reversible heat pump) is by far preferable to the fully gas-based solution (the CHP gas fired small power plant). In consequence, the first best outcome of the technological change would involve increasing large power generation and imported (from the utility grid) electricity consumption. Given this framework, we have to ask ourselves why operators, regulators and legislators are so optimistic about the development of the fully gas-based solutions. In this respect, the paper suggests that market distortions (such as market power, energy taxation and inefficient pricing regulation) might have give an ambiguous representation of the optimal technological trajectory, inducing to overestimate the social value

  6. Decision-making model of generation technology under uncertainty based on real option theory

    International Nuclear Information System (INIS)

    Ming, Zeng; Ping, Zhang; Shunkun, Yu; Ge, Zhang

    2016-01-01

    Highlights: • A decision-making model of generation technology investment is proposed. • The irreversible investment concept and real option theory is introduced. • Practical data was used to prove the validity of the model. • Impact of electricity and fuel price fluctuation on investment was analyzed. - Abstract: The introduction of market competition and the increased uncertainty factors makes the generators have to decide not only on whether to invest generation capacity or not but also on what kind of generation technology to choose. In this paper, a decision-making model of generation technology investment is proposed. The irreversible investment concept and real option theory is introduced as the fundamental of the model. In order to explain the decision-making process of generator’s investment, the decision-making optimization model was built considering two generation technologies, i.e., the heat-only system and the combined heat and power generation. Also, we discussed the theory deducing process, which explained how to eliminate the overrated economic potential caused by risk hazard, based on economic evaluation of both generation technologies. Finally, practical data from electricity market of Inner Mongolia was used to prove the validity of the model and the impact of uncertainties of electricity and fuel price fluctuation on investment was analyzed according to the simulated results.

  7. Features of state industrial policy under imperfect technological and institutional environment

    Directory of Open Access Journals (Sweden)

    Denisov Igor Vladimirovich

    2011-07-01

    Full Text Available For all countries with imperfect technology and the institutional environment (low culture and organization of production, high levels of corruption, the small middle class, not necessarily the execution of laws, etc., even such strong measures to support the economy like a direct financing of firms and territories, protectionism, stimulation of demand, etc. does not give significant effect. For Russia, which objectively have to be attributed to such countries, extremely relevant management system development, capable of overcoming difficulties, starting with the knees and the resistance of the imperfect (bad technological and institutional environment. Several theoretical solutions recently obtained through the development of the theory of economic-technological development of civilization, can create the mechanism and conditions of such a system.

  8. On the optimal allocation of green technology under climate change agreements

    Energy Technology Data Exchange (ETDEWEB)

    Schueller, David

    2009-07-15

    This report investigates whether a technology transfer mechanism can help to reach a cooperative outcome, in a game on a climate change treaty that involves emission caps for both developed and developing countries. A climate change treaty without the inclusion of developing countries and their acceptance of emission limits is likely to be ineffective. Too little research and development of green technology is currently undertaken, considering its potential global impact, especially in developing countries. Analyzing a simple game with two asymmetric players, a tentative result is that the technology-transfer mechanism considered here cannot help to establish the cooperative outcome as a Nash equilibrium. However, the inclusion of secondary benefits in the payoff function, which are likely to occur when such a transfer takes place, could change this result. (Author)

  9. Incentives for innovation and adoption of new technology under emissions trading

    OpenAIRE

    Mandell, Svante

    2009-01-01

    A common claim in both the public and academic debate is that a tradable emission permits scheme does not provide sufficient incentives for R&D investments. The present paper addresses R&D investments and penetration rates of new technology focusing on the specific characteristics of a tradable permits market. It is showed that a complex dependency between the emissions cap, the market price for emission permits, the price for technology once it is developed and the R&D investment decision ad...

  10. The Nordic Housing Enabler

    DEFF Research Database (Denmark)

    Helle, Tina; Slaug, Bjørn; Brandt, Åse

    2010-01-01

    This study addresses development of a content valid cross-Nordic version of the Housing Enabler and investigation of its inter-rater reliability when used in occupational therapy rating situations, involving occupational therapists, clients and their home environments. The instrument was translated...... from the original Swedish version of the Housing Enabler, and adapted according to accessibility norms and guidelines for housing design in Sweden, Denmark, Finland and Iceland. This iterative process involved occupational therapists, architects, building engineers and professional translators......, resulting in the Nordic Housing Enabler. For reliability testing, the sampling strategy and data collection procedures used were the same in all countries. Twenty voluntary occupational therapists, pair-wise but independently from each other, collected data from 106 cases by means of the Nordic Housing...

  11. Pilot project as enabler?

    DEFF Research Database (Denmark)

    Neisig, Margit; Glimø, Helle; Holm, Catrine Granzow

    This article deals with a systemic perspective on transition. The field of study addressed is a pilot project as enabler of transition in a highly complex polycentric context. From a Luhmannian systemic approach, a framework is created to understand and address barriers of change occurred using...... pilot projects as enabler of transition. Aspects of how to create trust and deal with distrust during a transition are addressed. The transition in focus is the concept of New Public Management and how it is applied in the management of the Employment Service in Denmark. The transition regards...

  12. On backstops and boomerangs. Environmental R and D under technological uncertainty

    International Nuclear Information System (INIS)

    Goeschl, Timo; Perino, Grischa

    2009-01-01

    In areas such as climate change, the recent economic literature has been emphasizing and addressing the pervasive presence of uncertainty. This paper considers a new and salient form of uncertainty, namely uncertainty regarding the environmental characteristics of 'green' innovations. Here, R and D may generate both backstop technologies and technologies that turn out to involve a new pollution problem ('boomerangs'). In the optimum, R and D will therefore typically be undertaken more than once. Extending results from multi-stage optimal control theory, we present a tractable model with a full characterization of the optimal pollution and R and D policies and the role of uncertainty. In this setting, (i) the optimal R and D program is defined by a research trigger condition in which the decision-maker's belief about the probability of finding a backstop enters in an intuitive way; (2) a decreasing probability of finding a backstop leads to the toleration of higher pollution levels, slower R and D, a slower turnover of technologies, and an ambiguous effect on the expected number of innovations; (3) learning about the probability of a backstop is driven by failures only and leads to decreasing research incentives; and (4) small to moderate delays in the resolution of technological uncertainty do not affect the optimal policy. (author)

  13. 76 FR 66235 - Bar Code Technologies for Drugs and Biological Products; Retrospective Review Under Executive...

    Science.gov (United States)

    2011-10-26

    ... interactions, overdoses, and patient allergies) and retail pharmacy-based computer systems that use a bar-coded... drugs. The goal of this initiative is to implement a system to further ensure patient safety and to..., and ideas on the need, maturity, and acceptability of alternative identification technologies for the...

  14. Consumptive Water Use from Electricity Generation in the Southwest under Alternative Climate, Technology, and Policy Futures.

    Science.gov (United States)

    Talati, Shuchi; Zhai, Haibo; Kyle, G Page; Morgan, M Granger; Patel, Pralit; Liu, Lu

    2016-11-15

    This research assesses climate, technological, and policy impacts on consumptive water use from electricity generation in the Southwest over a planning horizon of nearly a century. We employed an integrated modeling framework taking into account feedbacks between climate change, air temperature and humidity, and consequent power plant water requirements. These direct impacts of climate change on water consumption by 2095 differ with technology improvements, cooling systems, and policy constraints, ranging from a 3-7% increase over scenarios that do not incorporate ambient air impacts. Upon additional factors being changed that alter electricity generation, water consumption increases by up to 8% over the reference scenario by 2095. With high penetration of wet recirculating cooling, consumptive water required for low-carbon electricity generation via fossil fuels will likely exacerbate regional water pressure as droughts become more common and population increases. Adaptation strategies to lower water use include the use of advanced cooling technologies and greater dependence on solar and wind. Water consumption may be reduced by 50% in 2095 from the reference, requiring an increase in dry cooling shares to 35-40%. Alternatively, the same reduction could be achieved through photovoltaic and wind power generation constituting 60% of the grid, consistent with an increase of over 250% in technology learning rates.

  15. Future urbanization patterns: in the Netherlands under the influence of information and communication technologies

    NARCIS (Netherlands)

    Muhammad, S.

    2007-01-01

    Computer-based Information and Communication Technologies (ICTs) are revolutionary in that they change the meaning of distance and accessibility in society. People can now access opportunities (jobs, shopping, education, recreation etc.) in virtual space in a matter of seconds, which in physical

  16. The choice of strategic alternatives under increasing regulation in high technology companies.

    Science.gov (United States)

    Birnbaum, P H

    1984-09-01

    The strategic response of U.S. high technology companies in the medical X-ray manufacturing industry to increased governmental regulations from 1962 to 1977 is examined. Results suggest that regulations increase consumer and competitor uncertainty, with the consequence that firms select less risky strategies and decrease the riskier new product invention strategy. Larger firms reduce inventions less than smaller firms.

  17. The Nordic Housing Enabler

    DEFF Research Database (Denmark)

    Helle, T.; Nygren, C.; Slaug, B.

    2014-01-01

    This study addresses development of a content-valid cross-Nordic version of the Housing Enabler and investigation of its inter-rater reliability when used in occupational therapy rating situations, involving occupational therapists, clients, and their home environments. The instrument was transla......This study addresses development of a content-valid cross-Nordic version of the Housing Enabler and investigation of its inter-rater reliability when used in occupational therapy rating situations, involving occupational therapists, clients, and their home environments. The instrument...... was translated from the original Swedish version of the Housing Enabler, and adapted according to accessibility norms and guidelines for housing design in Sweden, Denmark, Finland, and Iceland. This iterative process involved occupational therapists, architects, building engineers, and professional translators......, resulting in the Nordic Housing Enabler. For reliability testing, the sampling strategy and data collection procedures used were the same in all countries. Twenty voluntary occupational therapists, pair-wise but independently of each other, collected data from 106 cases by means of the Nordic Housing...

  18. Technology-enabled examinations of cardiac rhythm, optic nerve, oral health, tympanic membrane, gait and coordination evaluated jointly with routine health screenings: an observational study at the 2015 Kumbh Mela in India

    Science.gov (United States)

    Gupta, Otkrist; Patalano II, Vincent; Mohit, Mrinal; Merchant, Rikin; Subramanian, S V

    2018-01-01

    Objectives Technology-enabled non-invasive diagnostic screening (TES) using smartphones and other point-of-care medical devices was evaluated in conjunction with conventional routine health screenings for the primary care screening of patients. Design Dental conditions, cardiac ECG arrhythmias, tympanic membrane disorders, blood oxygenation levels, optic nerve disorders and neurological fitness were evaluated using FDA-approved advanced smartphone powered technologies. Routine health screenings were also conducted. A novel remote web platform was developed to allow expert physicians to examine TES data and compare efficacy with routine health screenings. Setting The study was conducted at a primary care centre during the 2015 Kumbh Mela in Maharashtra, India. Participants 494 consenting 18–90 years old adults attending the 2015 Kumbh Mela were tested. Results TES and routine health screenings identified unique clinical conditions in distinct patients. Intraoral fluorescent imaging classified 63.3% of the population with dental caries and periodontal diseases. An association between poor oral health and cardiovascular illnesses was also identified. Tympanic membrane imaging detected eardrum abnormalities in 13.0% of the population, several with a medical history of hearing difficulties. Gait and coordination issues were discovered in eight subjects and one subject had arrhythmia. Cross-correlations were observed between low oxygen saturation and low body mass index (BMI) with smokers (p=0.0087 and p=0.0122, respectively), and high BMI was associated with elevated blood pressure in middle-aged subjects. Conclusions TES synergistically identified clinically significant abnormalities in several subjects who otherwise presented as normal in routine health screenings. Physicians validated TES findings and used routine health screening data and medical history responses for comprehensive diagnoses for at-risk patients. TES identified high prevalence of oral diseases

  19. Analysis on complex structure stability under different bar angle with BIM technology

    Directory of Open Access Journals (Sweden)

    Wang Xiongjue

    2016-03-01

    Full Text Available Sun Valley, the landmark building of World Expo in Shanghai, which has free surface with single-layer reticulated shell structure, is a typical complex structure. CAD/CAM integrated information system to design is used for the complex structure; however, it is a very rigorous process to be used widely. The relevant technology of the Sun Valley is not open to the public at present, so we try to use BIM technology to model the Sun Valley, including architecture modelling and structure analysis. By analysis of the Sun Valley structure using this method, it is proved that the problems in modelling may be solved by writing some script codes in Rhino software and the stability of the model can also be analyzed. The new approach is viable and effective in combination with different softwares such as Rhino, Revit, and Midas in solution of the complex shaped surfaces’ structure for modelling and calculation.

  20. Environmental policy on the fixed-fee licensing of eco-technology under foreign penetration

    OpenAIRE

    Kim, Seung-Leul; Lee, Sang-Ho

    2016-01-01

    This study investigates environmental policy on the fixed-fee licensing strategy of clean eco-technology by an innovator having foreign ownership. We show that near-zero emission taxes accompanied by non-exclusive licensing regulation can improve social welfare when the cost gap is small or foreign penetration is high. However, when foreign ownership is not high, exclusive licensing regulations with an appropriate emission tax policy may improve social welfare.

  1. Microbiological effectiveness of household water treatment technologies under field use conditions in rural Tanzania.

    Science.gov (United States)

    Mohamed, Hussein; Clasen, Thomas; Njee, Robert Mussa; Malebo, Hamisi M; Mbuligwe, Stephen; Brown, Joe

    2016-01-01

    To assess the microbiological effectiveness of several household water treatment and safe storage (HWTS) options in situ in Tanzania, before consideration for national scale-up of HWTS. Participating households received supplies and instructions for practicing six HWTS methods on a rotating 5-week basis. We analysed 1202 paired samples (source and treated) of drinking water from 390 households, across all technologies. Samples were analysed for thermotolerant (TTC) coliforms, an indicator of faecal contamination, to measure effectiveness of treatment in situ. All HWTS methods improved microbial water quality, with reductions in TTC of 99.3% for boiling, 99.4% for Waterguard ™ brand sodium hypochlorite solution, 99.5% for a ceramic pot filter, 99.5% for Aquatab ® sodium dichloroisocyanurate (NaDCC) tablets, 99.6% for P&G Purifier of Water ™ flocculent/disinfectant sachets, and 99.7% for a ceramic siphon filter. Microbiological performance was relatively high compared with other field studies and differences in microbial reductions between technologies were not statistically significant. Given that microbiological performance across technologies was comparable, decisions regarding scale-up should be based on other factors, including uptake in the target population and correct, consistent, and sustained use over time. © 2015 John Wiley & Sons Ltd.

  2. Performance comparison of four lithium–ion battery technologies under calendar aging

    International Nuclear Information System (INIS)

    Eddahech, Akram; Briat, Olivier; Vinassa, Jean-Michel

    2015-01-01

    This work depicts the calendar aging results of four Li-ion battery technologies. The differences in the chemistry of Li-ion batteries was studied and revealed that cathodes containing manganese are more sensitive to state-of-charge and temperature increase than lithium–iron-phosphate or lithium–nickel–cobalt–aluminum batteries. The first step in presenting the differences in technology of the Li-ion battery is through the study of the battery voltage evolution versus the amount of charge at various states of health. This study revealed a significant increase in resistance on lithium–nickel–manganese–cobalt and lithium–manganese-oxide cells; a result which was confirmed through impedance spectroscopy measurements. Finally, a study of the comparison of the different types of Li-ion batteries was undertaken, based on the analysis of the evolution of energy efficiency with respect to aging. - Highlights: • Calendar aging results of four Li-ion battery technologies are presented. • High temperature and/or the increased state-of-charge accelerated battery aging. • We analyzed the evolution of energy efficiency with respect to aging. • Cathodes with manganese are more sensitive to SOC and temperature increase

  3. The placement of naso-jejunal feeding tube under DSA guidance: its technology and skills

    International Nuclear Information System (INIS)

    Song Laichang; Wang Wenhui; Li Fenqiang; Su Dongjun; Li Bo

    2009-01-01

    Objective: To retrospectively analyze and summarize the manipulation and skills of the placement of naso-jejunal feeding tube under DSA guidance. Methods: After performing the spraying anesthesia of nasopharynx, the naso-jejunal feeding tube, with the help of guide wire and under DSA guidance, was placed into the proximal jejunum by passing it through the nose, pharynx, esophagus, stomach, pylorus and duodenum in order. The procedure was employed in 441 cases. Results: The mean time for performing the procedure was within five minutes. The procedure was successfully accomplished in all 441 cases and no complications occurred in this series. Conclusion: Under DSA guidance the placement of naso- jejunal feeding tube can be safely and quickly carried out with high successful rate and less sufferings to patient. It is worth popularizing this technique in clinical practice. (authors)

  4. Spatially enabled land administration

    DEFF Research Database (Denmark)

    Enemark, Stig

    2006-01-01

    enabling of land administration systems managing tenure, valuation, planning, and development will allow the information generated by these activities to be much more useful. Also, the services available to private and public sectors and to community organisations should commensurably improve. Knowledge....... In other words: Good governance and sustainable development is not attainable without sound land administration or - more broadly – sound land management. The paper presents a land management vision that incorporates the benefits of ICT enabled land administration functions. The idea is that spatial...... the communication between administrative systems and also establish more reliable data due to the use the original data instead of copies. In Denmark, such governmental guidelines for a service-oriented ITarchitecture in support of e-government are recently adopted. Finally, the paper presents the role of FIG...

  5. Sustainable development - billions of watts under the seas - Marine current turbines play simple - Technological waves

    International Nuclear Information System (INIS)

    Lucas, Th.

    2011-01-01

    The author evokes the opportunities of power generation by the development of sea current or tidal stream turbines. Some developments are already tested by Norwegian, French, Danish, British and American companies. Some specific turbines are briefly presented. In order to reduce the cost of the electricity production from sea currents, manufacturers are using simple and robust technologies, and exploit the experience gained on wind turbines. Some designs and prototypes are evoked for the production of electricity by sea waves (Pelamis and Oyster projects). Principles, strengths and production projects are briefly indicated. The challenge of maintenance in sea environment is outlined for these projects

  6. Low birth weight: Is it related to assisted reproductive technology or underlying infertility?

    Science.gov (United States)

    Kondapalli, Laxmi A.; Perales-Puchalt, Alfredo

    2013-01-01

    Since 1978, we have witnessed a successful evolution of assisted reproductive technology (ART), with improvement of the pregnancy rates and a growing demand. However, in recent years, there has been increasing concern regarding its safety due to the potential health impact on its infants. The raise of the developmental origins of adult disease has positioned low birth weight (LBW) as a significant health issue. Despite multiple studies have associated ART with LBW, the etiology of this association remains largely unknown. This paper reviews the potential association between different components of ART and infertility with LBW, while acknowledging the limitations to interpretation of the existing literature. PMID:23375144

  7. Research on infrared small-target tracking technology under complex background

    Science.gov (United States)

    Liu, Lei; Wang, Xin; Chen, Jilu; Pan, Tao

    2012-10-01

    In this paper, some basic principles and the implementing flow charts of a series of algorithms for target tracking are described. On the foundation of above works, a moving target tracking software base on the OpenCV is developed by the software developing platform MFC. Three kinds of tracking algorithms are integrated in this software. These two tracking algorithms are Kalman Filter tracking method and Camshift tracking method. In order to explain the software clearly, the framework and the function are described in this paper. At last, the implementing processes and results are analyzed, and those algorithms for tracking targets are evaluated from the two aspects of subjective and objective. This paper is very significant in the application of the infrared target tracking technology.

  8. NATO Advanced Research Workshop on Metastable Systems under Pressure: Platform for New Technologies and Environmental Applications

    CERN Document Server

    Rzoska, Sylwester; Mazur, Victor

    2010-01-01

    The fundamental insight and the technological & environmental relevance of metastable systems have given a strong impetus from the last decade development of extreme pressures experimental techniques, from the GPa region to the challenging negative pressures domain. The ultimate verification of theoretical models and reliable equations for portraying basic properties for such systems seems to be possible only when including temperature and pressure paths. This volume presents a set of papers related to novel findings on the glass transition phenomenon, phase transitions in liquid crystals, critical mixtures, bioliquids, geophysical system which can reveal surprising "secret" features only when using extreme pressures. This can be illustrated by the link between colloidal and molecular glassformers, the universal onset of the non-trivial dynamics in glasses, demistification of the secondary relaxation or novel findings associated with liquid - liquid near critical transitions in critical mixture, liquid cr...

  9. Assessment of regulations set up under public law concerning questions of safety technology

    International Nuclear Information System (INIS)

    Steiff, A.; Althaus, W.; Dietz, B.; Gross, H.J.; Stasiczek, M.; Salzwedel, J.; Reinhardt, M.

    1992-02-01

    A goal of the preliminary study was to assess the need for a data-processing system, to analyze the goals of such a system, to conceptualize it and examine possibilities for implementing it and to do a cost-benefit analysis of it. It serves as a means of assistance for - licensing and supervisory authorities, - the manufacturers and operators of plants, - the control institutions, - the communes, the governments of the Laender and the federal government, - trade associations and professional associations, - employers' organizations and employees' organizations in their efforts to solve problems and carry out tasks regarding safety technology. Such problems arise during the planning, construction, operation, alteration, closure and removal of plants as well as during the transport and storing of materials and goods. (orig./DG) [de

  10. Current status of the technology development on lithium safety handling under IFMIF/EVEDA

    Energy Technology Data Exchange (ETDEWEB)

    Furukawa, Tomohiro, E-mail: furukawa.tomohiro@jaea.go.jp; Hirakawa, Yasushi; Kato, Shoichi; Iijima, Minoru; Ohtaka, Masahiko; Kondo, Hiroo; Kanemura, Takuji; Wakai, Eiichi

    2014-12-15

    Studies for establishing technology for the safe handling of lithium was performed in the Engineering Validation and Engineering Design Activities (EVEDA) for the International Fusion Material Irradiation Facility (IFMIF). This research comprises four tasks: (a) extinguishing lithium files, (b) chemical reactions of lithium on the event of a leak, (c) lithium removal from the components, and (d) chemical analysis of impurities in lithium. Tasks (a) and (b), related to functions on the event of a lithium leak, involve selection of the material suitable for extinguishing lithium fires and assessment of corrosive effects of leaked lithium on materials at high temperature, respectively. Task (c) involves evaluation of methods for the replacement and/or decommissioning of the lithium components. Task (d) constitutes the development of high-precision techniques for the determination of impurities in lithium, particularly the dominating corrosive impurity—dissolved nitrogen. Experimental results addressing the objectives of each of the tasks are described in this communication.

  11. Disruptive Technology: An Uncertain Future

    Science.gov (United States)

    2005-05-21

    Technology that overturns market -- Military - Technology that causes a fundamental change in force structure, basing, and capability balance * Disruptive Technologies may arise from systems or enabling technology.

  12. EnableATIS strategy assessment.

    Science.gov (United States)

    2014-02-01

    Enabling Advanced Traveler Information Systems (EnableATIS) is the traveler information component of the Dynamic Mobility Application (DMA) program. The objective of : the EnableATIS effort is to foster transformative traveler information application...

  13. Enabling Digital Literacy

    DEFF Research Database (Denmark)

    Ryberg, Thomas; Georgsen, Marianne

    2010-01-01

    There are some tensions between high-level policy definitions of “digital literacy” and actual teaching practice. We need to find workable definitions of digital literacy; obtain a better understanding of what digital literacy might look like in practice; and identify pedagogical approaches, which...... support teachers in designing digital literacy learning. We suggest that frameworks such as Problem Based Learning (PBL) are approaches that enable digital literacy learning because they provide good settings for engaging with digital literacy. We illustrate this through analysis of a case. Furthermore......, these operate on a meso-level mediating between high-level concepts of digital literacy and classroom practice....

  14. CtOS Enabler

    OpenAIRE

    Crespo Cepeda, Rodrigo; El Yamri El Khatibi, Meriem; Carrera García, Juan Manuel

    2015-01-01

    Las Smart Cities son, indudablemente, el futuro próximo de la tecnología al que nos acercamos cada día, lo que se puede observar en la abundancia de dispositivos móviles entre la población, que informatizan la vida cotidiana mediante el uso de la geolocalización y la información. Pretendemos unir estos dos ámbitos con CtOS Enabler para crear un estándar de uso que englobe todos los sistemas de Smart Cities y facilite a los desarrolladores de dicho software la creación de nuevas herramientas. ...

  15. Context-Enabled Business Intelligence

    Energy Technology Data Exchange (ETDEWEB)

    Troy Hiltbrand

    2012-04-01

    To truly understand context and apply it in business intelligence, it is vital to understand what context is and how it can be applied in addressing organizational needs. Context describes the facets of the environment that impact the way that end users interact with the system. Context includes aspects of location, chronology, access method, demographics, social influence/ relationships, end-user attitude/ emotional state, behavior/ past behavior, and presence. To be successful in making Business Intelligence content enabled, it is important to be able to capture the context of use user. With advances in technology, there are a number of ways in which this user based information can be gathered and exposed to enhance the overall end user experience.

  16. Informatics enables public health surveillance

    Directory of Open Access Journals (Sweden)

    Scott J. N McNabb

    2017-01-01

    Full Text Available Over the past decade, the world has radically changed. New advances in information and communication technologies (ICT connect the world in ways never imagined. Public health informatics (PHI leveraged for public health surveillance (PHS, can enable, enhance, and empower essential PHS functions (i.e., detection, reporting, confirmation, analyses, feedback, response. However, the tail doesn't wag the dog; as such, ICT cannot (should not drive public health surveillance strengthening. Rather, ICT can serve PHS to more effectively empower core functions. In this review, we explore promising ICT trends for prevention, detection, and response, laboratory reporting, push notification, analytics, predictive surveillance, and using new data sources, while recognizing that it is the people, politics, and policies that most challenge progress for implementation of solutions.

  17. Carbon Footprint Analyses of Mainstream Wastewater Treatment Technologies under Different Sludge Treatment Scenarios in China

    Directory of Open Access Journals (Sweden)

    Chunyan Chai

    2015-03-01

    Full Text Available With rapid urbanization and infrastructure investment, wastewater treatment plants (WWTPs in Chinese cities are putting increased pressure on energy consumption and exacerbating greenhouse gas (GHG emissions. A carbon footprint is provided as a tool to quantify the life cycle GHG emissions and identify opportunities to reduce climate change impacts. This study examined three mainstream wastewater treatment technologies: Anaerobic–Anoxic–Oxic (A–A–O, Sequencing Batch Reactor (SBR and Oxygen Ditch, considering four different sludge treatment alternatives for small-to-medium-sized WWTPs. Following the life cycle approach, process design data and emission factors were used by the model to calculate the carbon footprint. Results found that direct emissions of CO2 and N2O, and indirect emissions of electricity use, are significant contributors to the carbon footprint. Although sludge anaerobic digestion and biogas recovery could significantly contribute to emission reduction, it was less beneficial for Oxygen Ditch than the other two treatment technologies due to its low sludge production. The influence of choosing “high risk” or “low risk” N2O emission factors on the carbon footprint was also investigated in this study. Oxygen Ditch was assessed as “low risk” of N2O emissions while SBR was “high risk”. The carbon footprint of A–A–O with sludge anaerobic digestion and energy recovery was more resilient to changes of N2O emission factors and control of N2O emissions, though process design parameters (i.e., effluent total nitrogen (TN concentration, mixed-liquor recycle (MLR rates and solids retention time (SRT and operation conditions (i.e., nitrite concentration are critical for reducing carbon footprint of SBR. Analyses of carbon footprints suggested that aerobic treatment of sludge not only favors the generation of large amounts of CO2, but also the emissions of N2O, so the rationale of reducing aerobic treatment and

  18. Smart Grid Enabled EVSE

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-01-12

    The combined team of GE Global Research, Federal Express, National Renewable Energy Laboratory, and Consolidated Edison has successfully achieved the established goals contained within the Department of Energy’s Smart Grid Capable Electric Vehicle Supply Equipment funding opportunity. The final program product, shown charging two vehicles in Figure 1, reduces by nearly 50% the total installed system cost of the electric vehicle supply equipment (EVSE) as well as enabling a host of new Smart Grid enabled features. These include bi-directional communications, load control, utility message exchange and transaction management information. Using the new charging system, Utilities or energy service providers will now be able to monitor transportation related electrical loads on their distribution networks, send load control commands or preferences to individual systems, and then see measured responses. Installation owners will be able to authorize usage of the stations, monitor operations, and optimally control their electricity consumption. These features and cost reductions have been developed through a total system design solution.

  19. Enabling Global Collaboration

    DEFF Research Database (Denmark)

    Brix, Anders; de Gier, Nicolai

    2014-01-01

    Traditional crafts still in existence and daily use in less industrialized countries, but to a great extend either extinct or deprived of meaning in the technologically 'developed' parts of the world, have an important role to play in creating the ’quality economy’ (Fry 2009). This involves recog...

  20. Enabling individualized therapy through nanotechnology.

    Science.gov (United States)

    Sakamoto, Jason H; van de Ven, Anne L; Godin, Biana; Blanco, Elvin; Serda, Rita E; Grattoni, Alessandro; Ziemys, Arturas; Bouamrani, Ali; Hu, Tony; Ranganathan, Shivakumar I; De Rosa, Enrica; Martinez, Jonathan O; Smid, Christine A; Buchanan, Rachel M; Lee, Sei-Young; Srinivasan, Srimeenakshi; Landry, Matthew; Meyn, Anne; Tasciotti, Ennio; Liu, Xuewu; Decuzzi, Paolo; Ferrari, Mauro

    2010-08-01

    Individualized medicine is the healthcare strategy that rebukes the idiomatic dogma of 'losing sight of the forest for the trees'. We are entering a new era of healthcare where it is no longer acceptable to develop and market a drug that is effective for only 80% of the patient population. The emergence of "-omic" technologies (e.g. genomics, transcriptomics, proteomics, metabolomics) and advances in systems biology are magnifying the deficiencies of standardized therapy, which often provide little treatment latitude for accommodating patient physiologic idiosyncrasies. A personalized approach to medicine is not a novel concept. Ever since the scientific community began unraveling the mysteries of the genome, the promise of discarding generic treatment regimens in favor of patient-specific therapies became more feasible and realistic. One of the major scientific impediments of this movement towards personalized medicine has been the need for technological enablement. Nanotechnology is projected to play a critical role in patient-specific therapy; however, this transition will depend heavily upon the evolutionary development of a systems biology approach to clinical medicine based upon "-omic" technology analysis and integration. This manuscript provides a forward looking assessment of the promise of nanomedicine as it pertains to individualized medicine and establishes a technology "snapshot" of the current state of nano-based products over a vast array of clinical indications and range of patient specificity. Other issues such as market driven hurdles and regulatory compliance reform are anticipated to "self-correct" in accordance to scientific advancement and healthcare demand. These peripheral, non-scientific concerns are not addressed at length in this manuscript; however they do exist, and their impact to the paradigm shifting healthcare transformation towards individualized medicine will be critical for its success. Copyright 2010 Elsevier Ltd. All rights